506 files changed, 0 insertions, 242376 deletions

diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig
deleted file mode 100644
index f6e40b3..0000000
--- a/drivers/media/dvb/Kconfig
+++ /dev/null
@@ -1,91 +0,0 @@
-#
-# DVB device configuration
-#
-
-config DVB_MAX_ADAPTERS
-	int "maximum number of DVB/ATSC adapters"
-	depends on DVB_CORE
-	default 8
-	range 1 255
-	help
-	  Maximum number of DVB/ATSC adapters. Increasing this number
-	  increases the memory consumption of the DVB subsystem even
-	  if a much lower number of DVB/ATSC adapters is present.
-	  Only values in the range 4-32 are tested.
-
-	  If you are unsure about this, use the default value 8
-
-config DVB_DYNAMIC_MINORS
-	bool "Dynamic DVB minor allocation"
-	depends on DVB_CORE
-	default n
-	help
-	  If you say Y here, the DVB subsystem will use dynamic minor
-	  allocation for any device that uses the DVB major number.
-	  This means that you can have more than 4 of a single type
-	  of device (like demuxes and frontends) per adapter, but udev
-	  will be required to manage the device nodes.
-
-	  If you are unsure about this, say N here.
-
-menuconfig DVB_CAPTURE_DRIVERS
-	bool "DVB/ATSC adapters"
-	depends on DVB_CORE
-	default y
-	---help---
-	  Say Y to select Digital TV adapters
-
-if DVB_CAPTURE_DRIVERS && DVB_CORE
-
-comment "Supported SAA7146 based PCI Adapters"
-	depends on DVB_CORE && PCI && I2C
-source "drivers/media/dvb/ttpci/Kconfig"
-
-comment "Supported USB Adapters"
-	depends on DVB_CORE && USB && I2C
-source "drivers/media/dvb/dvb-usb/Kconfig"
-source "drivers/media/dvb/ttusb-budget/Kconfig"
-source "drivers/media/dvb/ttusb-dec/Kconfig"
-source "drivers/media/dvb/siano/Kconfig"
-
-comment "Supported FlexCopII (B2C2) Adapters"
-	depends on DVB_CORE && (PCI || USB) && I2C
-source "drivers/media/dvb/b2c2/Kconfig"
-
-comment "Supported BT878 Adapters"
-	depends on DVB_CORE && PCI && I2C
-source "drivers/media/dvb/bt8xx/Kconfig"
-
-comment "Supported Pluto2 Adapters"
-	depends on DVB_CORE && PCI && I2C
-source "drivers/media/dvb/pluto2/Kconfig"
-
-comment "Supported SDMC DM1105 Adapters"
-	depends on DVB_CORE && PCI && I2C
-source "drivers/media/dvb/dm1105/Kconfig"
-
-comment "Supported FireWire (IEEE 1394) Adapters"
-	depends on DVB_CORE && FIREWIRE
-source "drivers/media/dvb/firewire/Kconfig"
-
-comment "Supported Earthsoft PT1 Adapters"
-	depends on DVB_CORE && PCI && I2C
-source "drivers/media/dvb/pt1/Kconfig"
-
-comment "Supported Mantis Adapters"
-	depends on DVB_CORE && PCI && I2C
-	source "drivers/media/dvb/mantis/Kconfig"
-
-comment "Supported nGene Adapters"
-	depends on DVB_CORE && PCI && I2C
-	source "drivers/media/dvb/ngene/Kconfig"
-
-comment "Supported ddbridge ('Octopus') Adapters"
-	depends on DVB_CORE && PCI && I2C
-	source "drivers/media/dvb/ddbridge/Kconfig"
-
-comment "Supported DVB Frontends"
-	depends on DVB_CORE
-source "drivers/media/dvb/frontends/Kconfig"
-
-endif # DVB_CAPTURE_DRIVERS
diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile
deleted file mode 100644
index b2cefe6..0000000
--- a/drivers/media/dvb/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Makefile for the kernel multimedia device drivers.
-#
-
-obj-y        := dvb-core/	\
-		frontends/	\
-		ttpci/		\
-		ttusb-dec/	\
-		ttusb-budget/	\
-		b2c2/		\
-		bt8xx/		\
-		dvb-usb/	\
-		pluto2/		\
-		siano/		\
-		dm1105/		\
-		pt1/		\
-		mantis/		\
-		ngene/		\
-		ddbridge/
-
-obj-$(CONFIG_DVB_FIREDTV)	+= firewire/
diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig
deleted file mode 100644
index 9e57814..0000000
--- a/drivers/media/dvb/b2c2/Kconfig
+++ /dev/null
@@ -1,45 +0,0 @@
-config DVB_B2C2_FLEXCOP
-	tristate "Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters"
-	depends on DVB_CORE && I2C
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_MT352 if !DVB_FE_CUSTOMISE
-	select DVB_MT312 if !DVB_FE_CUSTOMISE
-	select DVB_NXT200X if !DVB_FE_CUSTOMISE
-	select DVB_STV0297 if !DVB_FE_CUSTOMISE
-	select DVB_BCM3510 if !DVB_FE_CUSTOMISE
-	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
-	select DVB_S5H1420 if !DVB_FE_CUSTOMISE
-	select DVB_TUNER_ITD1000 if !DVB_FE_CUSTOMISE
-	select DVB_ISL6421 if !DVB_FE_CUSTOMISE
-	select DVB_CX24123 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
-	select DVB_TUNER_CX24113 if !DVB_FE_CUSTOMISE
-	help
-	  Support for the digital TV receiver chip made by B2C2 Inc. included in
-	  Technisats PCI cards and USB boxes.
-
-	  Say Y if you own such a device and want to use it.
-
-config DVB_B2C2_FLEXCOP_PCI
-	tristate "Technisat/B2C2 Air/Sky/Cable2PC PCI"
-	depends on DVB_B2C2_FLEXCOP && PCI && I2C
-	help
-	  Support for the Air/Sky/CableStar2 PCI card (DVB/ATSC) by Technisat/B2C2.
-
-	  Say Y if you own such a device and want to use it.
-
-config DVB_B2C2_FLEXCOP_USB
-	tristate "Technisat/B2C2 Air/Sky/Cable2PC USB"
-	depends on DVB_B2C2_FLEXCOP && USB && I2C
-	help
-	  Support for the Air/Sky/Cable2PC USB1.1 box (DVB/ATSC) by Technisat/B2C2,
-
-	  Say Y if you own such a device and want to use it.
-
-config DVB_B2C2_FLEXCOP_DEBUG
-	bool "Enable debug for the B2C2 FlexCop drivers"
-	depends on DVB_B2C2_FLEXCOP
-	help
-	  Say Y if you want to enable the module option to control debug messages
-	  of all B2C2 FlexCop drivers.
diff --git a/drivers/media/dvb/b2c2/Makefile b/drivers/media/dvb/b2c2/Makefile
deleted file mode 100644
index 3d04a8d..0000000
--- a/drivers/media/dvb/b2c2/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-b2c2-flexcop-objs = flexcop.o flexcop-fe-tuner.o flexcop-i2c.o \
-	flexcop-sram.o flexcop-eeprom.o flexcop-misc.o flexcop-hw-filter.o
-obj-$(CONFIG_DVB_B2C2_FLEXCOP) += b2c2-flexcop.o
-
-ifneq ($(CONFIG_DVB_B2C2_FLEXCOP_PCI),)
-b2c2-flexcop-objs += flexcop-dma.o
-endif
-
-b2c2-flexcop-pci-objs = flexcop-pci.o
-obj-$(CONFIG_DVB_B2C2_FLEXCOP_PCI) += b2c2-flexcop-pci.o
-
-b2c2-flexcop-usb-objs = flexcop-usb.o
-obj-$(CONFIG_DVB_B2C2_FLEXCOP_USB) += b2c2-flexcop-usb.o
-
-ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
-ccflags-y += -Idrivers/media/common/tuners/
diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h
deleted file mode 100644
index 437912e..0000000
--- a/drivers/media/dvb/b2c2/flexcop-common.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- * flexcop-common.h - common header file for device-specific source files
- * see flexcop.c for copyright information
- */
-#ifndef __FLEXCOP_COMMON_H__
-#define __FLEXCOP_COMMON_H__
-
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/mutex.h>
-
-#include "flexcop-reg.h"
-
-#include "dmxdev.h"
-#include "dvb_demux.h"
-#include "dvb_filter.h"
-#include "dvb_net.h"
-#include "dvb_frontend.h"
-
-#define FC_MAX_FEED 256
-
-#ifndef FC_LOG_PREFIX
-#warning please define a log prefix for your file, using a default one
-#define FC_LOG_PREFIX "b2c2-undef"
-#endif
-
-/* Steal from usb.h */
-#undef err
-#define err(format, arg...) \
-	printk(KERN_ERR FC_LOG_PREFIX ": " format "\n" , ## arg)
-#undef info
-#define info(format, arg...) \
-	printk(KERN_INFO FC_LOG_PREFIX ": " format "\n" , ## arg)
-#undef warn
-#define warn(format, arg...) \
-	printk(KERN_WARNING FC_LOG_PREFIX ": " format "\n" , ## arg)
-
-struct flexcop_dma {
-	struct pci_dev *pdev;
-
-	u8 *cpu_addr0;
-	dma_addr_t dma_addr0;
-	u8 *cpu_addr1;
-	dma_addr_t dma_addr1;
-	u32 size; /* size of each address in bytes */
-};
-
-struct flexcop_i2c_adapter {
-	struct flexcop_device *fc;
-	struct i2c_adapter i2c_adap;
-
-	u8 no_base_addr;
-	flexcop_i2c_port_t port;
-};
-
-/* Control structure for data definitions that are common to
- * the B2C2-based PCI and USB devices.
- */
-struct flexcop_device {
-	/* general */
-	struct device *dev; /* for firmware_class */
-
-#define FC_STATE_DVB_INIT 0x01
-#define FC_STATE_I2C_INIT 0x02
-#define FC_STATE_FE_INIT  0x04
-	int init_state;
-
-	/* device information */
-	int has_32_hw_pid_filter;
-	flexcop_revision_t rev;
-	flexcop_device_type_t dev_type;
-	flexcop_bus_t bus_type;
-
-	/* dvb stuff */
-	struct dvb_adapter dvb_adapter;
-	struct dvb_frontend *fe;
-	struct dvb_net dvbnet;
-	struct dvb_demux demux;
-	struct dmxdev dmxdev;
-	struct dmx_frontend hw_frontend;
-	struct dmx_frontend mem_frontend;
-	int (*fe_sleep) (struct dvb_frontend *);
-
-	struct flexcop_i2c_adapter fc_i2c_adap[3];
-	struct mutex i2c_mutex;
-	struct module *owner;
-
-	/* options and status */
-	int extra_feedcount;
-	int feedcount;
-	int pid_filtering;
-	int fullts_streaming_state;
-
-	/* bus specific callbacks */
-	flexcop_ibi_value(*read_ibi_reg) (struct flexcop_device *,
-			flexcop_ibi_register);
-	int (*write_ibi_reg) (struct flexcop_device *,
-			flexcop_ibi_register, flexcop_ibi_value);
-	int (*i2c_request) (struct flexcop_i2c_adapter *,
-		flexcop_access_op_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
-	int (*stream_control) (struct flexcop_device *, int);
-	int (*get_mac_addr) (struct flexcop_device *fc, int extended);
-	void *bus_specific;
-};
-
-/* exported prototypes */
-
-/* from flexcop.c */
-void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len);
-void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no);
-
-struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len);
-void flexcop_device_kfree(struct flexcop_device *);
-
-int flexcop_device_initialize(struct flexcop_device *);
-void flexcop_device_exit(struct flexcop_device *fc);
-void flexcop_reset_block_300(struct flexcop_device *fc);
-
-/* from flexcop-dma.c */
-int flexcop_dma_allocate(struct pci_dev *pdev,
-		struct flexcop_dma *dma, u32 size);
-void flexcop_dma_free(struct flexcop_dma *dma);
-
-int flexcop_dma_control_timer_irq(struct flexcop_device *fc,
-		flexcop_dma_index_t no, int onoff);
-int flexcop_dma_control_size_irq(struct flexcop_device *fc,
-		flexcop_dma_index_t no, int onoff);
-int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma,
-		flexcop_dma_index_t dma_idx);
-int flexcop_dma_xfer_control(struct flexcop_device *fc,
-		flexcop_dma_index_t dma_idx, flexcop_dma_addr_index_t index,
-		int onoff);
-int flexcop_dma_config_timer(struct flexcop_device *fc,
-		flexcop_dma_index_t dma_idx, u8 cycles);
-
-/* from flexcop-eeprom.c */
-/* the PCI part uses this call to get the MAC address, the USB part has its own */
-int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended);
-
-/* from flexcop-i2c.c */
-/* the PCI part uses this a i2c_request callback, whereas the usb part has its own
- * one. We have it in flexcop-i2c.c, because it is going via the actual
- * I2C-channel of the flexcop.
- */
-int flexcop_i2c_request(struct flexcop_i2c_adapter*, flexcop_access_op_t,
-	u8 chipaddr, u8 addr, u8 *buf, u16 len);
-
-/* from flexcop-sram.c */
-int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest,
-	flexcop_sram_dest_target_t target);
-void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s);
-void flexcop_sram_ctrl(struct flexcop_device *fc,
-		int usb_wan, int sramdma, int maximumfill);
-
-/* global prototypes for the flexcop-chip */
-/* from flexcop-fe-tuner.c */
-int flexcop_frontend_init(struct flexcop_device *fc);
-void flexcop_frontend_exit(struct flexcop_device *fc);
-
-/* from flexcop-i2c.c */
-int flexcop_i2c_init(struct flexcop_device *fc);
-void flexcop_i2c_exit(struct flexcop_device *fc);
-
-/* from flexcop-sram.c */
-int flexcop_sram_init(struct flexcop_device *fc);
-
-/* from flexcop-misc.c */
-void flexcop_determine_revision(struct flexcop_device *fc);
-void flexcop_device_name(struct flexcop_device *fc,
-		const char *prefix, const char *suffix);
-void flexcop_dump_reg(struct flexcop_device *fc,
-		flexcop_ibi_register reg, int num);
-
-/* from flexcop-hw-filter.c */
-int flexcop_pid_feed_control(struct flexcop_device *fc,
-		struct dvb_demux_feed *dvbdmxfeed, int onoff);
-void flexcop_hw_filter_init(struct flexcop_device *fc);
-
-void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff);
-
-void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6]);
-void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff);
-
-#endif
diff --git a/drivers/media/dvb/b2c2/flexcop-dma.c b/drivers/media/dvb/b2c2/flexcop-dma.c
deleted file mode 100644
index 2881e0d..0000000
--- a/drivers/media/dvb/b2c2/flexcop-dma.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- * flexcop-dma.c - configuring and controlling the DMA of the FlexCop
- * see flexcop.c for copyright information
- */
-#include "flexcop.h"
-
-int flexcop_dma_allocate(struct pci_dev *pdev,
-		struct flexcop_dma *dma, u32 size)
-{
-	u8 *tcpu;
-	dma_addr_t tdma = 0;
-
-	if (size % 2) {
-		err("dma buffersize has to be even.");
-		return -EINVAL;
-	}
-
-	if ((tcpu = pci_alloc_consistent(pdev, size, &tdma)) != NULL) {
-		dma->pdev = pdev;
-		dma->cpu_addr0 = tcpu;
-		dma->dma_addr0 = tdma;
-		dma->cpu_addr1 = tcpu + size/2;
-		dma->dma_addr1 = tdma + size/2;
-		dma->size = size/2;
-		return 0;
-	}
-	return -ENOMEM;
-}
-EXPORT_SYMBOL(flexcop_dma_allocate);
-
-void flexcop_dma_free(struct flexcop_dma *dma)
-{
-	pci_free_consistent(dma->pdev, dma->size*2,
-			dma->cpu_addr0, dma->dma_addr0);
-	memset(dma,0,sizeof(struct flexcop_dma));
-}
-EXPORT_SYMBOL(flexcop_dma_free);
-
-int flexcop_dma_config(struct flexcop_device *fc,
-		struct flexcop_dma *dma,
-		flexcop_dma_index_t dma_idx)
-{
-	flexcop_ibi_value v0x0,v0x4,v0xc;
-	v0x0.raw = v0x4.raw = v0xc.raw = 0;
-
-	v0x0.dma_0x0.dma_address0 = dma->dma_addr0 >> 2;
-	v0xc.dma_0xc.dma_address1 = dma->dma_addr1 >> 2;
-	v0x4.dma_0x4_write.dma_addr_size = dma->size / 4;
-
-	if ((dma_idx & FC_DMA_1) == dma_idx) {
-		fc->write_ibi_reg(fc,dma1_000,v0x0);
-		fc->write_ibi_reg(fc,dma1_004,v0x4);
-		fc->write_ibi_reg(fc,dma1_00c,v0xc);
-	} else if ((dma_idx & FC_DMA_2) == dma_idx) {
-		fc->write_ibi_reg(fc,dma2_010,v0x0);
-		fc->write_ibi_reg(fc,dma2_014,v0x4);
-		fc->write_ibi_reg(fc,dma2_01c,v0xc);
-	} else {
-		err("either DMA1 or DMA2 can be configured within one "
-			"flexcop_dma_config call.");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(flexcop_dma_config);
-
-/* start the DMA transfers, but not the DMA IRQs */
-int flexcop_dma_xfer_control(struct flexcop_device *fc,
-		flexcop_dma_index_t dma_idx,
-		flexcop_dma_addr_index_t index,
-		int onoff)
-{
-	flexcop_ibi_value v0x0,v0xc;
-	flexcop_ibi_register r0x0,r0xc;
-
-	if ((dma_idx & FC_DMA_1) == dma_idx) {
-		r0x0 = dma1_000;
-		r0xc = dma1_00c;
-	} else if ((dma_idx & FC_DMA_2) == dma_idx) {
-		r0x0 = dma2_010;
-		r0xc = dma2_01c;
-	} else {
-		err("either transfer DMA1 or DMA2 can be started within one "
-			"flexcop_dma_xfer_control call.");
-		return -EINVAL;
-	}
-
-	v0x0 = fc->read_ibi_reg(fc,r0x0);
-	v0xc = fc->read_ibi_reg(fc,r0xc);
-
-	deb_rdump("reg: %03x: %x\n",r0x0,v0x0.raw);
-	deb_rdump("reg: %03x: %x\n",r0xc,v0xc.raw);
-
-	if (index & FC_DMA_SUBADDR_0)
-		v0x0.dma_0x0.dma_0start = onoff;
-
-	if (index & FC_DMA_SUBADDR_1)
-		v0xc.dma_0xc.dma_1start = onoff;
-
-	fc->write_ibi_reg(fc,r0x0,v0x0);
-	fc->write_ibi_reg(fc,r0xc,v0xc);
-
-	deb_rdump("reg: %03x: %x\n",r0x0,v0x0.raw);
-	deb_rdump("reg: %03x: %x\n",r0xc,v0xc.raw);
-	return 0;
-}
-EXPORT_SYMBOL(flexcop_dma_xfer_control);
-
-static int flexcop_dma_remap(struct flexcop_device *fc,
-		flexcop_dma_index_t dma_idx,
-		int onoff)
-{
-	flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_00c : dma2_01c;
-	flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
-	deb_info("%s\n",__func__);
-	v.dma_0xc.remap_enable = onoff;
-	fc->write_ibi_reg(fc,r,v);
-	return 0;
-}
-
-int flexcop_dma_control_size_irq(struct flexcop_device *fc,
-		flexcop_dma_index_t no,
-		int onoff)
-{
-	flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
-
-	if (no & FC_DMA_1)
-		v.ctrl_208.DMA1_IRQ_Enable_sig = onoff;
-
-	if (no & FC_DMA_2)
-		v.ctrl_208.DMA2_IRQ_Enable_sig = onoff;
-
-	fc->write_ibi_reg(fc,ctrl_208,v);
-	return 0;
-}
-EXPORT_SYMBOL(flexcop_dma_control_size_irq);
-
-int flexcop_dma_control_timer_irq(struct flexcop_device *fc,
-		flexcop_dma_index_t no,
-		int onoff)
-{
-	flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
-
-	if (no & FC_DMA_1)
-		v.ctrl_208.DMA1_Timer_Enable_sig = onoff;
-
-	if (no & FC_DMA_2)
-		v.ctrl_208.DMA2_Timer_Enable_sig = onoff;
-
-	fc->write_ibi_reg(fc,ctrl_208,v);
-	return 0;
-}
-EXPORT_SYMBOL(flexcop_dma_control_timer_irq);
-
-/* 1 cycles = 1.97 msec */
-int flexcop_dma_config_timer(struct flexcop_device *fc,
-		flexcop_dma_index_t dma_idx, u8 cycles)
-{
-	flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014;
-	flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
-
-	flexcop_dma_remap(fc,dma_idx,0);
-
-	deb_info("%s\n",__func__);
-	v.dma_0x4_write.dmatimer = cycles;
-	fc->write_ibi_reg(fc,r,v);
-	return 0;
-}
-EXPORT_SYMBOL(flexcop_dma_config_timer);
-
diff --git a/drivers/media/dvb/b2c2/flexcop-eeprom.c b/drivers/media/dvb/b2c2/flexcop-eeprom.c
deleted file mode 100644
index a25373a..0000000
--- a/drivers/media/dvb/b2c2/flexcop-eeprom.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- * flexcop-eeprom.c - eeprom access methods (currently only MAC address reading)
- * see flexcop.c for copyright information
- */
-#include "flexcop.h"
-
-#if 0
-/*EEPROM (Skystar2 has one "24LC08B" chip on board) */
-static int eeprom_write(struct adapter *adapter, u16 addr, u8 *buf, u16 len)
-{
-	return flex_i2c_write(adapter, 0x20000000, 0x50, addr, buf, len);
-}
-
-static int eeprom_lrc_write(struct adapter *adapter, u32 addr,
-		u32 len, u8 *wbuf, u8 *rbuf, int retries)
-{
-int i;
-
-for (i = 0; i < retries; i++) {
-	if (eeprom_write(adapter, addr, wbuf, len) == len) {
-		if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1)
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/* These functions could be used to unlock SkyStar2 cards. */
-
-static int eeprom_writeKey(struct adapter *adapter, u8 *key, u32 len)
-{
-	u8 rbuf[20];
-	u8 wbuf[20];
-
-	if (len != 16)
-		return 0;
-
-	memcpy(wbuf, key, len);
-	wbuf[16] = 0;
-	wbuf[17] = 0;
-	wbuf[18] = 0;
-	wbuf[19] = calc_lrc(wbuf, 19);
-	return eeprom_lrc_write(adapter, 0x3e4, 20, wbuf, rbuf, 4);
-}
-
-static int eeprom_readKey(struct adapter *adapter, u8 *key, u32 len)
-{
-	u8 buf[20];
-
-	if (len != 16)
-		return 0;
-
-	if (eeprom_lrc_read(adapter, 0x3e4, 20, buf, 4) == 0)
-		return 0;
-
-	memcpy(key, buf, len);
-	return 1;
-}
-
-static char eeprom_set_mac_addr(struct adapter *adapter, char type, u8 *mac)
-{
-	u8 tmp[8];
-
-	if (type != 0) {
-		tmp[0] = mac[0];
-		tmp[1] = mac[1];
-		tmp[2] = mac[2];
-		tmp[3] = mac[5];
-		tmp[4] = mac[6];
-		tmp[5] = mac[7];
-	} else {
-		tmp[0] = mac[0];
-		tmp[1] = mac[1];
-		tmp[2] = mac[2];
-		tmp[3] = mac[3];
-		tmp[4] = mac[4];
-		tmp[5] = mac[5];
-	}
-
-	tmp[6] = 0;
-	tmp[7] = calc_lrc(tmp, 7);
-
-	if (eeprom_write(adapter, 0x3f8, tmp, 8) == 8)
-		return 1;
-	return 0;
-}
-
-static int flexcop_eeprom_read(struct flexcop_device *fc,
-		u16 addr, u8 *buf, u16 len)
-{
-	return fc->i2c_request(fc,FC_READ,FC_I2C_PORT_EEPROM,0x50,addr,buf,len);
-}
-
-#endif
-
-static u8 calc_lrc(u8 *buf, int len)
-{
-	int i;
-	u8 sum = 0;
-	for (i = 0; i < len; i++)
-		sum = sum ^ buf[i];
-	return sum;
-}
-
-static int flexcop_eeprom_request(struct flexcop_device *fc,
-	flexcop_access_op_t op, u16 addr, u8 *buf, u16 len, int retries)
-{
-	int i,ret = 0;
-	u8 chipaddr =  0x50 | ((addr >> 8) & 3);
-	for (i = 0; i < retries; i++) {
-		ret = fc->i2c_request(&fc->fc_i2c_adap[1], op, chipaddr,
-			addr & 0xff, buf, len);
-		if (ret == 0)
-			break;
-	}
-	return ret;
-}
-
-static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr,
-		u8 *buf, u16 len, int retries)
-{
-	int ret = flexcop_eeprom_request(fc, FC_READ, addr, buf, len, retries);
-	if (ret == 0)
-		if (calc_lrc(buf, len - 1) != buf[len - 1])
-			ret = -EINVAL;
-	return ret;
-}
-
-/* JJ's comment about extended == 1: it is not presently used anywhere but was
- * added to the low-level functions for possible support of EUI64 */
-int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended)
-{
-	u8 buf[8];
-	int ret = 0;
-
-	if ((ret = flexcop_eeprom_lrc_read(fc,0x3f8,buf,8,4)) == 0) {
-		if (extended != 0) {
-			err("TODO: extended (EUI64) MAC addresses aren't "
-				"completely supported yet");
-			ret = -EINVAL;
-		} else
-			memcpy(fc->dvb_adapter.proposed_mac,buf,6);
-	}
-	return ret;
-}
-EXPORT_SYMBOL(flexcop_eeprom_check_mac_addr);
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
deleted file mode 100644
index 850a6c6..0000000
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ /dev/null
@@ -1,678 +0,0 @@
-/*
- * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- * flexcop-fe-tuner.c - methods for frontend attachment and DiSEqC controlling
- * see flexcop.c for copyright information
- */
-#include <media/tuner.h>
-#include "flexcop.h"
-#include "mt312.h"
-#include "stv0299.h"
-#include "s5h1420.h"
-#include "itd1000.h"
-#include "cx24113.h"
-#include "cx24123.h"
-#include "isl6421.h"
-#include "mt352.h"
-#include "bcm3510.h"
-#include "nxt200x.h"
-#include "dvb-pll.h"
-#include "lgdt330x.h"
-#include "tuner-simple.h"
-#include "stv0297.h"
-
-
-/* Can we use the specified front-end?  Remember that if we are compiled
- * into the kernel we can't call code that's in modules.  */
-#define FE_SUPPORTED(fe) (defined(CONFIG_DVB_##fe) || \
-	(defined(CONFIG_DVB_##fe##_MODULE) && defined(MODULE)))
-
-/* lnb control */
-#if FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299)
-static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-{
-	struct flexcop_device *fc = fe->dvb->priv;
-	flexcop_ibi_value v;
-	deb_tuner("polarity/voltage = %u\n", voltage);
-
-	v = fc->read_ibi_reg(fc, misc_204);
-	switch (voltage) {
-	case SEC_VOLTAGE_OFF:
-		v.misc_204.ACPI1_sig = 1;
-		break;
-	case SEC_VOLTAGE_13:
-		v.misc_204.ACPI1_sig = 0;
-		v.misc_204.LNB_L_H_sig = 0;
-		break;
-	case SEC_VOLTAGE_18:
-		v.misc_204.ACPI1_sig = 0;
-		v.misc_204.LNB_L_H_sig = 1;
-		break;
-	default:
-		err("unknown SEC_VOLTAGE value");
-		return -EINVAL;
-	}
-	return fc->write_ibi_reg(fc, misc_204, v);
-}
-#endif
-
-#if FE_SUPPORTED(S5H1420) || FE_SUPPORTED(STV0299) || FE_SUPPORTED(MT312)
-static int flexcop_sleep(struct dvb_frontend* fe)
-{
-	struct flexcop_device *fc = fe->dvb->priv;
-	if (fc->fe_sleep)
-		return fc->fe_sleep(fe);
-	return 0;
-}
-#endif
-
-/* SkyStar2 DVB-S rev 2.3 */
-#if FE_SUPPORTED(MT312) && FE_SUPPORTED(PLL)
-static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
-{
-/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
-	struct flexcop_device *fc = fe->dvb->priv;
-	flexcop_ibi_value v;
-	u16 ax;
-	v.raw = 0;
-	deb_tuner("tone = %u\n",tone);
-
-	switch (tone) {
-	case SEC_TONE_ON:
-		ax = 0x01ff;
-		break;
-	case SEC_TONE_OFF:
-		ax = 0;
-		break;
-	default:
-		err("unknown SEC_TONE value");
-		return -EINVAL;
-	}
-
-	v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */
-	v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax;
-	v.lnb_switch_freq_200.LNB_CTLLowCount_sig  = ax == 0 ? 0x1ff : ax;
-	return fc->write_ibi_reg(fc,lnb_switch_freq_200,v);
-}
-
-static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data)
-{
-	flexcop_set_tone(fe, SEC_TONE_ON);
-	udelay(data ? 500 : 1000);
-	flexcop_set_tone(fe, SEC_TONE_OFF);
-	udelay(data ? 1000 : 500);
-}
-
-static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data)
-{
-	int i, par = 1, d;
-	for (i = 7; i >= 0; i--) {
-		d = (data >> i) & 1;
-		par ^= d;
-		flexcop_diseqc_send_bit(fe, d);
-	}
-	flexcop_diseqc_send_bit(fe, par);
-}
-
-static int flexcop_send_diseqc_msg(struct dvb_frontend *fe,
-	int len, u8 *msg, unsigned long burst)
-{
-	int i;
-
-	flexcop_set_tone(fe, SEC_TONE_OFF);
-	mdelay(16);
-
-	for (i = 0; i < len; i++)
-		flexcop_diseqc_send_byte(fe,msg[i]);
-	mdelay(16);
-
-	if (burst != -1) {
-		if (burst)
-			flexcop_diseqc_send_byte(fe, 0xff);
-		else {
-			flexcop_set_tone(fe, SEC_TONE_ON);
-			mdelay(12);
-			udelay(500);
-			flexcop_set_tone(fe, SEC_TONE_OFF);
-		}
-		msleep(20);
-	}
-	return 0;
-}
-
-static int flexcop_diseqc_send_master_cmd(struct dvb_frontend *fe,
-	struct dvb_diseqc_master_cmd *cmd)
-{
-	return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0);
-}
-
-static int flexcop_diseqc_send_burst(struct dvb_frontend *fe,
-	fe_sec_mini_cmd_t minicmd)
-{
-	return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd);
-}
-
-static struct mt312_config skystar23_samsung_tbdu18132_config = {
-	.demod_address = 0x0e,
-};
-
-static int skystar2_rev23_attach(struct flexcop_device *fc,
-	struct i2c_adapter *i2c)
-{
-	struct dvb_frontend_ops *ops;
-
-	fc->fe = dvb_attach(mt312_attach, &skystar23_samsung_tbdu18132_config, i2c);
-	if (!fc->fe)
-		return 0;
-
-	if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, i2c,
-			DVB_PLL_SAMSUNG_TBDU18132))
-		return 0;
-
-	ops = &fc->fe->ops;
-	ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
-	ops->diseqc_send_burst      = flexcop_diseqc_send_burst;
-	ops->set_tone               = flexcop_set_tone;
-	ops->set_voltage            = flexcop_set_voltage;
-	fc->fe_sleep                = ops->sleep;
-	ops->sleep                  = flexcop_sleep;
-	return 1;
-}
-#else
-#define skystar2_rev23_attach NULL
-#endif
-
-/* SkyStar2 DVB-S rev 2.6 */
-#if FE_SUPPORTED(STV0299) && FE_SUPPORTED(PLL)
-static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe,
-	u32 srate, u32 ratio)
-{
-	u8 aclk = 0;
-	u8 bclk = 0;
-
-	if (srate < 1500000) {
-		aclk = 0xb7; bclk = 0x47;
-	} else if (srate < 3000000) {
-		aclk = 0xb7; bclk = 0x4b;
-	} else if (srate < 7000000) {
-		aclk = 0xb7; bclk = 0x4f;
-	} else if (srate < 14000000) {
-		aclk = 0xb7; bclk = 0x53;
-	} else if (srate < 30000000) {
-		aclk = 0xb6; bclk = 0x53;
-	} else if (srate < 45000000) {
-		aclk = 0xb4; bclk = 0x51;
-	}
-
-	stv0299_writereg(fe, 0x13, aclk);
-	stv0299_writereg(fe, 0x14, bclk);
-	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
-	stv0299_writereg(fe, 0x20, (ratio >>  8) & 0xff);
-	stv0299_writereg(fe, 0x21,  ratio        & 0xf0);
-	return 0;
-}
-
-static u8 samsung_tbmu24112_inittab[] = {
-	0x01, 0x15,
-	0x02, 0x30,
-	0x03, 0x00,
-	0x04, 0x7D,
-	0x05, 0x35,
-	0x06, 0x02,
-	0x07, 0x00,
-	0x08, 0xC3,
-	0x0C, 0x00,
-	0x0D, 0x81,
-	0x0E, 0x23,
-	0x0F, 0x12,
-	0x10, 0x7E,
-	0x11, 0x84,
-	0x12, 0xB9,
-	0x13, 0x88,
-	0x14, 0x89,
-	0x15, 0xC9,
-	0x16, 0x00,
-	0x17, 0x5C,
-	0x18, 0x00,
-	0x19, 0x00,
-	0x1A, 0x00,
-	0x1C, 0x00,
-	0x1D, 0x00,
-	0x1E, 0x00,
-	0x1F, 0x3A,
-	0x20, 0x2E,
-	0x21, 0x80,
-	0x22, 0xFF,
-	0x23, 0xC1,
-	0x28, 0x00,
-	0x29, 0x1E,
-	0x2A, 0x14,
-	0x2B, 0x0F,
-	0x2C, 0x09,
-	0x2D, 0x05,
-	0x31, 0x1F,
-	0x32, 0x19,
-	0x33, 0xFE,
-	0x34, 0x93,
-	0xff, 0xff,
-};
-
-static struct stv0299_config samsung_tbmu24112_config = {
-	.demod_address = 0x68,
-	.inittab = samsung_tbmu24112_inittab,
-	.mclk = 88000000UL,
-	.invert = 0,
-	.skip_reinit = 0,
-	.lock_output = STV0299_LOCKOUTPUT_LK,
-	.volt13_op0_op1 = STV0299_VOLT13_OP1,
-	.min_delay_ms = 100,
-	.set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
-};
-
-static int skystar2_rev26_attach(struct flexcop_device *fc,
-	struct i2c_adapter *i2c)
-{
-	fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c);
-	if (!fc->fe)
-		return 0;
-
-	if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, i2c,
-			DVB_PLL_SAMSUNG_TBMU24112))
-		return 0;
-
-	fc->fe->ops.set_voltage = flexcop_set_voltage;
-	fc->fe_sleep = fc->fe->ops.sleep;
-	fc->fe->ops.sleep = flexcop_sleep;
-	return 1;
-
-}
-#else
-#define skystar2_rev26_attach NULL
-#endif
-
-/* SkyStar2 DVB-S rev 2.7 */
-#if FE_SUPPORTED(S5H1420) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_ITD1000)
-static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
-	.demod_address = 0x53,
-	.invert = 1,
-	.repeated_start_workaround = 1,
-	.serial_mpeg = 1,
-};
-
-static struct itd1000_config skystar2_rev2_7_itd1000_config = {
-	.i2c_address = 0x61,
-};
-
-static int skystar2_rev27_attach(struct flexcop_device *fc,
-	struct i2c_adapter *i2c)
-{
-	flexcop_ibi_value r108;
-	struct i2c_adapter *i2c_tuner;
-
-	/* enable no_base_addr - no repeated start when reading */
-	fc->fc_i2c_adap[0].no_base_addr = 1;
-	fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config,
-			    i2c);
-	if (!fc->fe)
-		goto fail;
-
-	i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe);
-	if (!i2c_tuner)
-		goto fail;
-
-	fc->fe_sleep = fc->fe->ops.sleep;
-	fc->fe->ops.sleep = flexcop_sleep;
-
-	/* enable no_base_addr - no repeated start when reading */
-	fc->fc_i2c_adap[2].no_base_addr = 1;
-	if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap,
-			0x08, 1, 1)) {
-		err("ISL6421 could NOT be attached");
-		goto fail_isl;
-	}
-	info("ISL6421 successfully attached");
-
-	/* the ITD1000 requires a lower i2c clock - is it a problem ? */
-	r108.raw = 0x00000506;
-	fc->write_ibi_reg(fc, tw_sm_c_108, r108);
-	if (!dvb_attach(itd1000_attach, fc->fe, i2c_tuner,
-			&skystar2_rev2_7_itd1000_config)) {
-		err("ITD1000 could NOT be attached");
-		/* Should i2c clock be restored? */
-		goto fail_isl;
-	}
-	info("ITD1000 successfully attached");
-
-	return 1;
-
-fail_isl:
-	fc->fc_i2c_adap[2].no_base_addr = 0;
-fail:
-	/* for the next devices we need it again */
-	fc->fc_i2c_adap[0].no_base_addr = 0;
-	return 0;
-}
-#else
-#define skystar2_rev27_attach NULL
-#endif
-
-/* SkyStar2 rev 2.8 */
-#if FE_SUPPORTED(CX24123) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_CX24113)
-static struct cx24123_config skystar2_rev2_8_cx24123_config = {
-	.demod_address = 0x55,
-	.dont_use_pll = 1,
-	.agc_callback = cx24113_agc_callback,
-};
-
-static const struct cx24113_config skystar2_rev2_8_cx24113_config = {
-	.i2c_addr = 0x54,
-	.xtal_khz = 10111,
-};
-
-static int skystar2_rev28_attach(struct flexcop_device *fc,
-	struct i2c_adapter *i2c)
-{
-	struct i2c_adapter *i2c_tuner;
-
-	fc->fe = dvb_attach(cx24123_attach, &skystar2_rev2_8_cx24123_config,
-			    i2c);
-	if (!fc->fe)
-		return 0;
-
-	i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe);
-	if (!i2c_tuner)
-		return 0;
-
-	if (!dvb_attach(cx24113_attach, fc->fe, &skystar2_rev2_8_cx24113_config,
-			i2c_tuner)) {
-		err("CX24113 could NOT be attached");
-		return 0;
-	}
-	info("CX24113 successfully attached");
-
-	fc->fc_i2c_adap[2].no_base_addr = 1;
-	if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap,
-			0x08, 0, 0)) {
-		err("ISL6421 could NOT be attached");
-		fc->fc_i2c_adap[2].no_base_addr = 0;
-		return 0;
-	}
-	info("ISL6421 successfully attached");
-	/* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an
-	 * IR-receiver (PIC16F818) - but the card has no input for that ??? */
-	return 1;
-}
-#else
-#define skystar2_rev28_attach NULL
-#endif
-
-/* AirStar DVB-T */
-#if FE_SUPPORTED(MT352) && FE_SUPPORTED(PLL)
-static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe)
-{
-	static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d };
-	static u8 mt352_reset[] = { 0x50, 0x80 };
-	static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0x40 };
-	static u8 mt352_agc_cfg[] = { 0x67, 0x28, 0xa1 };
-	static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
-
-	mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
-	udelay(2000);
-	mt352_write(fe, mt352_reset, sizeof(mt352_reset));
-	mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
-	mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
-	mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
-	return 0;
-}
-
-static struct mt352_config samsung_tdtc9251dh0_config = {
-	.demod_address = 0x0f,
-	.demod_init    = samsung_tdtc9251dh0_demod_init,
-};
-
-static int airstar_dvbt_attach(struct flexcop_device *fc,
-	struct i2c_adapter *i2c)
-{
-	fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c);
-	if (!fc->fe)
-		return 0;
-
-	return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
-			    DVB_PLL_SAMSUNG_TDTC9251DH0);
-}
-#else
-#define airstar_dvbt_attach NULL
-#endif
-
-/* AirStar ATSC 1st generation */
-#if FE_SUPPORTED(BCM3510)
-static int flexcop_fe_request_firmware(struct dvb_frontend *fe,
-	const struct firmware **fw, char* name)
-{
-	struct flexcop_device *fc = fe->dvb->priv;
-	return request_firmware(fw, name, fc->dev);
-}
-
-static struct bcm3510_config air2pc_atsc_first_gen_config = {
-	.demod_address    = 0x0f,
-	.request_firmware = flexcop_fe_request_firmware,
-};
-
-static int airstar_atsc1_attach(struct flexcop_device *fc,
-	struct i2c_adapter *i2c)
-{
-	fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
-	return fc->fe != NULL;
-}
-#else
-#define airstar_atsc1_attach NULL
-#endif
-
-/* AirStar ATSC 2nd generation */
-#if FE_SUPPORTED(NXT200X) && FE_SUPPORTED(PLL)
-static struct nxt200x_config samsung_tbmv_config = {
-	.demod_address = 0x0a,
-};
-
-static int airstar_atsc2_attach(struct flexcop_device *fc,
-	struct i2c_adapter *i2c)
-{
-	fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c);
-	if (!fc->fe)
-		return 0;
-
-	return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
-			    DVB_PLL_SAMSUNG_TBMV);
-}
-#else
-#define airstar_atsc2_attach NULL
-#endif
-
-/* AirStar ATSC 3rd generation */
-#if FE_SUPPORTED(LGDT330X)
-static struct lgdt330x_config air2pc_atsc_hd5000_config = {
-	.demod_address       = 0x59,
-	.demod_chip          = LGDT3303,
-	.serial_mpeg         = 0x04,
-	.clock_polarity_flip = 1,
-};
-
-static int airstar_atsc3_attach(struct flexcop_device *fc,
-	struct i2c_adapter *i2c)
-{
-	fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c);
-	if (!fc->fe)
-		return 0;
-
-	return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
-			    TUNER_LG_TDVS_H06XF);
-}
-#else
-#define airstar_atsc3_attach NULL
-#endif
-
-/* CableStar2 DVB-C */
-#if FE_SUPPORTED(STV0297) && FE_SUPPORTED(PLL)
-static u8 alps_tdee4_stv0297_inittab[] = {
-	0x80, 0x01,
-	0x80, 0x00,
-	0x81, 0x01,
-	0x81, 0x00,
-	0x00, 0x48,
-	0x01, 0x58,
-	0x03, 0x00,
-	0x04, 0x00,
-	0x07, 0x00,
-	0x08, 0x00,
-	0x30, 0xff,
-	0x31, 0x9d,
-	0x32, 0xff,
-	0x33, 0x00,
-	0x34, 0x29,
-	0x35, 0x55,
-	0x36, 0x80,
-	0x37, 0x6e,
-	0x38, 0x9c,
-	0x40, 0x1a,
-	0x41, 0xfe,
-	0x42, 0x33,
-	0x43, 0x00,
-	0x44, 0xff,
-	0x45, 0x00,
-	0x46, 0x00,
-	0x49, 0x04,
-	0x4a, 0x51,
-	0x4b, 0xf8,
-	0x52, 0x30,
-	0x53, 0x06,
-	0x59, 0x06,
-	0x5a, 0x5e,
-	0x5b, 0x04,
-	0x61, 0x49,
-	0x62, 0x0a,
-	0x70, 0xff,
-	0x71, 0x04,
-	0x72, 0x00,
-	0x73, 0x00,
-	0x74, 0x0c,
-	0x80, 0x20,
-	0x81, 0x00,
-	0x82, 0x30,
-	0x83, 0x00,
-	0x84, 0x04,
-	0x85, 0x22,
-	0x86, 0x08,
-	0x87, 0x1b,
-	0x88, 0x00,
-	0x89, 0x00,
-	0x90, 0x00,
-	0x91, 0x04,
-	0xa0, 0x86,
-	0xa1, 0x00,
-	0xa2, 0x00,
-	0xb0, 0x91,
-	0xb1, 0x0b,
-	0xc0, 0x5b,
-	0xc1, 0x10,
-	0xc2, 0x12,
-	0xd0, 0x02,
-	0xd1, 0x00,
-	0xd2, 0x00,
-	0xd3, 0x00,
-	0xd4, 0x02,
-	0xd5, 0x00,
-	0xde, 0x00,
-	0xdf, 0x01,
-	0xff, 0xff,
-};
-
-static struct stv0297_config alps_tdee4_stv0297_config = {
-	.demod_address = 0x1c,
-	.inittab = alps_tdee4_stv0297_inittab,
-};
-
-static int cablestar2_attach(struct flexcop_device *fc,
-	struct i2c_adapter *i2c)
-{
-	fc->fc_i2c_adap[0].no_base_addr = 1;
-	fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
-	if (!fc->fe)
-		goto fail;
-
-	/* This tuner doesn't use the stv0297's I2C gate, but instead the
-	 * tuner is connected to a different flexcop I2C adapter.  */
-	if (fc->fe->ops.i2c_gate_ctrl)
-		fc->fe->ops.i2c_gate_ctrl(fc->fe, 0);
-	fc->fe->ops.i2c_gate_ctrl = NULL;
-
-	if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61,
-			&fc->fc_i2c_adap[2].i2c_adap, DVB_PLL_TDEE4))
-		goto fail;
-
-	return 1;
-
-fail:
-	/* Reset for next frontend to try */
-	fc->fc_i2c_adap[0].no_base_addr = 0;
-	return 0;
-}
-#else
-#define cablestar2_attach NULL
-#endif
-
-static struct {
-	flexcop_device_type_t type;
-	int (*attach)(struct flexcop_device *, struct i2c_adapter *);
-} flexcop_frontends[] = {
-	{ FC_SKY_REV27, skystar2_rev27_attach },
-	{ FC_SKY_REV28, skystar2_rev28_attach },
-	{ FC_SKY_REV26, skystar2_rev26_attach },
-	{ FC_AIR_DVBT, airstar_dvbt_attach },
-	{ FC_AIR_ATSC2, airstar_atsc2_attach },
-	{ FC_AIR_ATSC3, airstar_atsc3_attach },
-	{ FC_AIR_ATSC1, airstar_atsc1_attach },
-	{ FC_CABLE, cablestar2_attach },
-	{ FC_SKY_REV23, skystar2_rev23_attach },
-};
-
-/* try to figure out the frontend */
-int flexcop_frontend_init(struct flexcop_device *fc)
-{
-	int i;
-	for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) {
-		if (!flexcop_frontends[i].attach)
-			continue;
-		/* type needs to be set before, because of some workarounds
-		 * done based on the probed card type */
-		fc->dev_type = flexcop_frontends[i].type;
-		if (flexcop_frontends[i].attach(fc, &fc->fc_i2c_adap[0].i2c_adap))
-			goto fe_found;
-		/* Clean up partially attached frontend */
-		if (fc->fe) {
-			dvb_frontend_detach(fc->fe);
-			fc->fe = NULL;
-		}
-	}
-	fc->dev_type = FC_UNK;
-	err("no frontend driver found for this B2C2/FlexCop adapter");
-	return -ENODEV;
-
-fe_found:
-	info("found '%s' .", fc->fe->ops.info.name);
-	if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
-		err("frontend registration failed!");
-		dvb_frontend_detach(fc->fe);
-		fc->fe = NULL;
-		return -EINVAL;
-	}
-	fc->init_state |= FC_STATE_FE_INIT;
-	return 0;
-}
-
-void flexcop_frontend_exit(struct flexcop_device *fc)
-{
-	if (fc->init_state & FC_STATE_FE_INIT) {
-		dvb_unregister_frontend(fc->fe);
-		dvb_frontend_detach(fc->fe);
-	}
-	fc->init_state &= ~FC_STATE_FE_INIT;
-}
diff --git a/drivers/media/dvb/b2c2/flexcop-hw-filter.c b/drivers/media/dvb/b2c2/flexcop-hw-filter.c
deleted file mode 100644
index 77e4547..0000000
--- a/drivers/media/dvb/b2c2/flexcop-hw-filter.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- * flexcop-hw-filter.c - pid and mac address filtering and control functions
- * see flexcop.c for copyright information
- */
-#include "flexcop.h"
-
-static void flexcop_rcv_data_ctrl(struct flexcop_device *fc, int onoff)
-{
-	flexcop_set_ibi_value(ctrl_208, Rcv_Data_sig, onoff);
-	deb_ts("rcv_data is now: '%s'\n", onoff ? "on" : "off");
-}
-
-void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff)
-{
-	flexcop_set_ibi_value(ctrl_208, SMC_Enable_sig, onoff);
-}
-
-static void flexcop_null_filter_ctrl(struct flexcop_device *fc, int onoff)
-{
-	flexcop_set_ibi_value(ctrl_208, Null_filter_sig, onoff);
-}
-
-void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6])
-{
-	flexcop_ibi_value v418, v41c;
-	v41c = fc->read_ibi_reg(fc, mac_address_41c);
-
-	v418.mac_address_418.MAC1 = mac[0];
-	v418.mac_address_418.MAC2 = mac[1];
-	v418.mac_address_418.MAC3 = mac[2];
-	v418.mac_address_418.MAC6 = mac[3];
-	v41c.mac_address_41c.MAC7 = mac[4];
-	v41c.mac_address_41c.MAC8 = mac[5];
-
-	fc->write_ibi_reg(fc, mac_address_418, v418);
-	fc->write_ibi_reg(fc, mac_address_41c, v41c);
-}
-
-void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff)
-{
-	flexcop_set_ibi_value(ctrl_208, MAC_filter_Mode_sig, onoff);
-}
-
-static void flexcop_pid_group_filter(struct flexcop_device *fc,
-		u16 pid, u16 mask)
-{
-	/* index_reg_310.extra_index_reg need to 0 or 7 to work */
-	flexcop_ibi_value v30c;
-	v30c.pid_filter_30c_ext_ind_0_7.Group_PID = pid;
-	v30c.pid_filter_30c_ext_ind_0_7.Group_mask = mask;
-	fc->write_ibi_reg(fc, pid_filter_30c, v30c);
-}
-
-static void flexcop_pid_group_filter_ctrl(struct flexcop_device *fc, int onoff)
-{
-	flexcop_set_ibi_value(ctrl_208, Mask_filter_sig, onoff);
-}
-
-/* this fancy define reduces the code size of the quite similar PID controlling of
- * the first 6 PIDs
- */
-
-#define pid_ctrl(vregname,field,enablefield,trans_field,transval) \
-	flexcop_ibi_value vpid = fc->read_ibi_reg(fc, vregname), \
-v208 = fc->read_ibi_reg(fc, ctrl_208); \
-vpid.vregname.field = onoff ? pid : 0x1fff; \
-vpid.vregname.trans_field = transval; \
-v208.ctrl_208.enablefield = onoff; \
-fc->write_ibi_reg(fc, vregname, vpid); \
-fc->write_ibi_reg(fc, ctrl_208, v208);
-
-static void flexcop_pid_Stream1_PID_ctrl(struct flexcop_device *fc,
-		u16 pid, int onoff)
-{
-	pid_ctrl(pid_filter_300, Stream1_PID, Stream1_filter_sig,
-			Stream1_trans, 0);
-}
-
-static void flexcop_pid_Stream2_PID_ctrl(struct flexcop_device *fc,
-		u16 pid, int onoff)
-{
-	pid_ctrl(pid_filter_300, Stream2_PID, Stream2_filter_sig,
-			Stream2_trans, 0);
-}
-
-static void flexcop_pid_PCR_PID_ctrl(struct flexcop_device *fc,
-		u16 pid, int onoff)
-{
-	pid_ctrl(pid_filter_304, PCR_PID, PCR_filter_sig, PCR_trans, 0);
-}
-
-static void flexcop_pid_PMT_PID_ctrl(struct flexcop_device *fc,
-		u16 pid, int onoff)
-{
-	pid_ctrl(pid_filter_304, PMT_PID, PMT_filter_sig, PMT_trans, 0);
-}
-
-static void flexcop_pid_EMM_PID_ctrl(struct flexcop_device *fc,
-		u16 pid, int onoff)
-{
-	pid_ctrl(pid_filter_308, EMM_PID, EMM_filter_sig, EMM_trans, 0);
-}
-
-static void flexcop_pid_ECM_PID_ctrl(struct flexcop_device *fc,
-		u16 pid, int onoff)
-{
-	pid_ctrl(pid_filter_308, ECM_PID, ECM_filter_sig, ECM_trans, 0);
-}
-
-static void flexcop_pid_control(struct flexcop_device *fc,
-		int index, u16 pid, int onoff)
-{
-	if (pid == 0x2000)
-		return;
-
-	deb_ts("setting pid: %5d %04x at index %d '%s'\n",
-			pid, pid, index, onoff ? "on" : "off");
-
-	/* We could use bit magic here to reduce source code size.
-	 * I decided against it, but to use the real register names */
-	switch (index) {
-	case 0:
-		flexcop_pid_Stream1_PID_ctrl(fc, pid, onoff);
-		break;
-	case 1:
-		flexcop_pid_Stream2_PID_ctrl(fc, pid, onoff);
-		break;
-	case 2:
-		flexcop_pid_PCR_PID_ctrl(fc, pid, onoff);
-		break;
-	case 3:
-		flexcop_pid_PMT_PID_ctrl(fc, pid, onoff);
-		break;
-	case 4:
-		flexcop_pid_EMM_PID_ctrl(fc, pid, onoff);
-		break;
-	case 5:
-		flexcop_pid_ECM_PID_ctrl(fc, pid, onoff);
-		break;
-	default:
-		if (fc->has_32_hw_pid_filter && index < 38) {
-			flexcop_ibi_value vpid, vid;
-
-			/* set the index */
-			vid = fc->read_ibi_reg(fc, index_reg_310);
-			vid.index_reg_310.index_reg = index - 6;
-			fc->write_ibi_reg(fc, index_reg_310, vid);
-
-			vpid = fc->read_ibi_reg(fc, pid_n_reg_314);
-			vpid.pid_n_reg_314.PID = onoff ? pid : 0x1fff;
-			vpid.pid_n_reg_314.PID_enable_bit = onoff;
-			fc->write_ibi_reg(fc, pid_n_reg_314, vpid);
-		}
-		break;
-	}
-}
-
-static int flexcop_toggle_fullts_streaming(struct flexcop_device *fc, int onoff)
-{
-	if (fc->fullts_streaming_state != onoff) {
-		deb_ts("%s full TS transfer\n",onoff ? "enabling" : "disabling");
-		flexcop_pid_group_filter(fc, 0, 0x1fe0 * (!onoff));
-		flexcop_pid_group_filter_ctrl(fc, onoff);
-		fc->fullts_streaming_state = onoff;
-	}
-	return 0;
-}
-
-int flexcop_pid_feed_control(struct flexcop_device *fc,
-		struct dvb_demux_feed *dvbdmxfeed, int onoff)
-{
-	int max_pid_filter = 6 + fc->has_32_hw_pid_filter*32;
-
-	fc->feedcount += onoff ? 1 : -1; /* the number of PIDs/Feed currently requested */
-	if (dvbdmxfeed->index >= max_pid_filter)
-		fc->extra_feedcount += onoff ? 1 : -1;
-
-	/* toggle complete-TS-streaming when:
-	 * - pid_filtering is not enabled and it is the first or last feed requested
-	 * - pid_filtering is enabled,
-	 *   - but the number of requested feeds is exceeded
-	 *   - or the requested pid is 0x2000 */
-
-	if (!fc->pid_filtering && fc->feedcount == onoff)
-		flexcop_toggle_fullts_streaming(fc, onoff);
-
-	if (fc->pid_filtering) {
-		flexcop_pid_control \
-			(fc, dvbdmxfeed->index, dvbdmxfeed->pid, onoff);
-
-		if (fc->extra_feedcount > 0)
-			flexcop_toggle_fullts_streaming(fc, 1);
-		else if (dvbdmxfeed->pid == 0x2000)
-			flexcop_toggle_fullts_streaming(fc, onoff);
-		else
-			flexcop_toggle_fullts_streaming(fc, 0);
-	}
-
-	/* if it was the first or last feed request change the stream-status */
-	if (fc->feedcount == onoff) {
-		flexcop_rcv_data_ctrl(fc, onoff);
-		if (fc->stream_control) /* device specific stream control */
-			fc->stream_control(fc, onoff);
-
-		/* feeding stopped -> reset the flexcop filter*/
-		if (onoff == 0) {
-			flexcop_reset_block_300(fc);
-			flexcop_hw_filter_init(fc);
-		}
-	}
-	return 0;
-}
-EXPORT_SYMBOL(flexcop_pid_feed_control);
-
-void flexcop_hw_filter_init(struct flexcop_device *fc)
-{
-	int i;
-	flexcop_ibi_value v;
-	for (i = 0; i < 6 + 32*fc->has_32_hw_pid_filter; i++)
-		flexcop_pid_control(fc, i, 0x1fff, 0);
-
-	flexcop_pid_group_filter(fc, 0, 0x1fe0);
-	flexcop_pid_group_filter_ctrl(fc, 0);
-
-	v = fc->read_ibi_reg(fc, pid_filter_308);
-	v.pid_filter_308.EMM_filter_4 = 1;
-	v.pid_filter_308.EMM_filter_6 = 0;
-	fc->write_ibi_reg(fc, pid_filter_308, v);
-
-	flexcop_null_filter_ctrl(fc, 1);
-}
diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c
deleted file mode 100644
index 965d5eb..0000000
--- a/drivers/media/dvb/b2c2/flexcop-i2c.c
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- * flexcop-i2c.c - flexcop internal 2Wire bus (I2C) and dvb i2c initialization
- * see flexcop.c for copyright information
- */
-#include "flexcop.h"
-
-#define FC_MAX_I2C_RETRIES 100000
-
-static int flexcop_i2c_operation(struct flexcop_device *fc,
-		flexcop_ibi_value *r100)
-{
-	int i;
-	flexcop_ibi_value r;
-
-	r100->tw_sm_c_100.working_start = 1;
-	deb_i2c("r100 before: %08x\n",r100->raw);
-
-	fc->write_ibi_reg(fc, tw_sm_c_100, ibi_zero);
-	fc->write_ibi_reg(fc, tw_sm_c_100, *r100); /* initiating i2c operation */
-
-	for (i = 0; i < FC_MAX_I2C_RETRIES; i++) {
-		r = fc->read_ibi_reg(fc, tw_sm_c_100);
-
-		if (!r.tw_sm_c_100.no_base_addr_ack_error) {
-			if (r.tw_sm_c_100.st_done) {
-				*r100 = r;
-				deb_i2c("i2c success\n");
-				return 0;
-			}
-		} else {
-			deb_i2c("suffering from an i2c ack_error\n");
-			return -EREMOTEIO;
-		}
-	}
-	deb_i2c("tried %d times i2c operation, "
-			"never finished or too many ack errors.\n", i);
-	return -EREMOTEIO;
-}
-
-static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c,
-		flexcop_ibi_value r100, u8 *buf)
-{
-	flexcop_ibi_value r104;
-	int len = r100.tw_sm_c_100.total_bytes,
-		/* remember total_bytes is buflen-1 */
-		ret;
-
-	/* work-around to have CableStar2 and SkyStar2 rev 2.7 work
-	 * correctly:
-	 *
-	 * the ITD1000 is behind an i2c-gate which closes automatically
-	 * after an i2c-transaction the STV0297 needs 2 consecutive reads
-	 * one with no_base_addr = 0 and one with 1
-	 *
-	 * those two work-arounds are conflictin: we check for the card
-	 * type, it is set when probing the ITD1000 */
-	if (i2c->fc->dev_type == FC_SKY_REV27)
-		r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
-
-	ret = flexcop_i2c_operation(i2c->fc, &r100);
-	if (ret != 0) {
-		deb_i2c("Retrying operation\n");
-		r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
-		ret = flexcop_i2c_operation(i2c->fc, &r100);
-	}
-	if (ret != 0) {
-		deb_i2c("read failed. %d\n", ret);
-		return ret;
-	}
-
-	buf[0] = r100.tw_sm_c_100.data1_reg;
-
-	if (len > 0) {
-		r104 = i2c->fc->read_ibi_reg(i2c->fc, tw_sm_c_104);
-		deb_i2c("read: r100: %08x, r104: %08x\n", r100.raw, r104.raw);
-
-		/* there is at least one more byte, otherwise we wouldn't be here */
-		buf[1] = r104.tw_sm_c_104.data2_reg;
-		if (len > 1) buf[2] = r104.tw_sm_c_104.data3_reg;
-		if (len > 2) buf[3] = r104.tw_sm_c_104.data4_reg;
-	}
-	return 0;
-}
-
-static int flexcop_i2c_write4(struct flexcop_device *fc,
-		flexcop_ibi_value r100, u8 *buf)
-{
-	flexcop_ibi_value r104;
-	int len = r100.tw_sm_c_100.total_bytes; /* remember total_bytes is buflen-1 */
-	r104.raw = 0;
-
-	/* there is at least one byte, otherwise we wouldn't be here */
-	r100.tw_sm_c_100.data1_reg = buf[0];
-	r104.tw_sm_c_104.data2_reg = len > 0 ? buf[1] : 0;
-	r104.tw_sm_c_104.data3_reg = len > 1 ? buf[2] : 0;
-	r104.tw_sm_c_104.data4_reg = len > 2 ? buf[3] : 0;
-
-	deb_i2c("write: r100: %08x, r104: %08x\n", r100.raw, r104.raw);
-
-	/* write the additional i2c data before doing the actual i2c operation */
-	fc->write_ibi_reg(fc, tw_sm_c_104, r104);
-	return flexcop_i2c_operation(fc, &r100);
-}
-
-int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c,
-		flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len)
-{
-	int ret;
-
-#ifdef DUMP_I2C_MESSAGES
-	int i;
-#endif
-
-	u16 bytes_to_transfer;
-	flexcop_ibi_value r100;
-
-	deb_i2c("op = %d\n",op);
-	r100.raw = 0;
-	r100.tw_sm_c_100.chipaddr = chipaddr;
-	r100.tw_sm_c_100.twoWS_rw = op;
-	r100.tw_sm_c_100.twoWS_port_reg = i2c->port;
-
-#ifdef DUMP_I2C_MESSAGES
-	printk(KERN_DEBUG "%d ", i2c->port);
-	if (op == FC_READ)
-		printk("rd(");
-	else
-		printk("wr(");
-	printk("%02x): %02x ", chipaddr, addr);
-#endif
-
-	/* in that case addr is the only value ->
-	 * we write it twice as baseaddr and val0
-	 * BBTI is doing it like that for ISL6421 at least */
-	if (i2c->no_base_addr && len == 0 && op == FC_WRITE) {
-		buf = &addr;
-		len = 1;
-	}
-
-	while (len != 0) {
-		bytes_to_transfer = len > 4 ? 4 : len;
-
-		r100.tw_sm_c_100.total_bytes = bytes_to_transfer - 1;
-		r100.tw_sm_c_100.baseaddr = addr;
-
-		if (op == FC_READ)
-			ret = flexcop_i2c_read4(i2c, r100, buf);
-		else
-			ret = flexcop_i2c_write4(i2c->fc, r100, buf);
-
-#ifdef DUMP_I2C_MESSAGES
-		for (i = 0; i < bytes_to_transfer; i++)
-			printk("%02x ", buf[i]);
-#endif
-
-		if (ret < 0)
-			return ret;
-
-		buf  += bytes_to_transfer;
-		addr += bytes_to_transfer;
-		len  -= bytes_to_transfer;
-	}
-
-#ifdef DUMP_I2C_MESSAGES
-	printk("\n");
-#endif
-
-	return 0;
-}
-/* exported for PCI i2c */
-EXPORT_SYMBOL(flexcop_i2c_request);
-
-/* master xfer callback for demodulator */
-static int flexcop_master_xfer(struct i2c_adapter *i2c_adap,
-		struct i2c_msg msgs[], int num)
-{
-	struct flexcop_i2c_adapter *i2c = i2c_get_adapdata(i2c_adap);
-	int i, ret = 0;
-
-	/* Some drivers use 1 byte or 0 byte reads as probes, which this
-	 * driver doesn't support.  These probes will always fail, so this
-	 * hack makes them always succeed.  If one knew how, it would of
-	 * course be better to actually do the read.  */
-	if (num == 1 && msgs[0].flags == I2C_M_RD && msgs[0].len <= 1)
-		return 1;
-
-	if (mutex_lock_interruptible(&i2c->fc->i2c_mutex))
-		return -ERESTARTSYS;
-
-	for (i = 0; i < num; i++) {
-		/* reading */
-		if (i+1 < num && (msgs[i+1].flags == I2C_M_RD)) {
-			ret = i2c->fc->i2c_request(i2c, FC_READ, msgs[i].addr,
-					msgs[i].buf[0], msgs[i+1].buf,
-					msgs[i+1].len);
-			i++; /* skip the following message */
-		} else /* writing */
-			ret = i2c->fc->i2c_request(i2c, FC_WRITE, msgs[i].addr,
-					msgs[i].buf[0], &msgs[i].buf[1],
-					msgs[i].len - 1);
-		if (ret < 0) {
-			deb_i2c("i2c master_xfer failed");
-			break;
-		}
-	}
-
-	mutex_unlock(&i2c->fc->i2c_mutex);
-
-	if (ret == 0)
-		ret = num;
-	return ret;
-}
-
-static u32 flexcop_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm flexcop_algo = {
-	.master_xfer	= flexcop_master_xfer,
-	.functionality	= flexcop_i2c_func,
-};
-
-int flexcop_i2c_init(struct flexcop_device *fc)
-{
-	int ret;
-	mutex_init(&fc->i2c_mutex);
-
-	fc->fc_i2c_adap[0].fc = fc;
-	fc->fc_i2c_adap[1].fc = fc;
-	fc->fc_i2c_adap[2].fc = fc;
-	fc->fc_i2c_adap[0].port = FC_I2C_PORT_DEMOD;
-	fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM;
-	fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER;
-
-	strlcpy(fc->fc_i2c_adap[0].i2c_adap.name, "B2C2 FlexCop I2C to demod",
-			sizeof(fc->fc_i2c_adap[0].i2c_adap.name));
-	strlcpy(fc->fc_i2c_adap[1].i2c_adap.name, "B2C2 FlexCop I2C to eeprom",
-			sizeof(fc->fc_i2c_adap[1].i2c_adap.name));
-	strlcpy(fc->fc_i2c_adap[2].i2c_adap.name, "B2C2 FlexCop I2C to tuner",
-			sizeof(fc->fc_i2c_adap[2].i2c_adap.name));
-
-	i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]);
-	i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]);
-	i2c_set_adapdata(&fc->fc_i2c_adap[2].i2c_adap, &fc->fc_i2c_adap[2]);
-
-	fc->fc_i2c_adap[0].i2c_adap.algo =
-		fc->fc_i2c_adap[1].i2c_adap.algo =
-		fc->fc_i2c_adap[2].i2c_adap.algo = &flexcop_algo;
-	fc->fc_i2c_adap[0].i2c_adap.algo_data =
-		fc->fc_i2c_adap[1].i2c_adap.algo_data =
-		fc->fc_i2c_adap[2].i2c_adap.algo_data = NULL;
-	fc->fc_i2c_adap[0].i2c_adap.dev.parent =
-		fc->fc_i2c_adap[1].i2c_adap.dev.parent =
-		fc->fc_i2c_adap[2].i2c_adap.dev.parent = fc->dev;
-
-	ret = i2c_add_adapter(&fc->fc_i2c_adap[0].i2c_adap);
-	if (ret < 0)
-		return ret;
-
-	ret = i2c_add_adapter(&fc->fc_i2c_adap[1].i2c_adap);
-	if (ret < 0)
-		goto adap_1_failed;
-
-	ret = i2c_add_adapter(&fc->fc_i2c_adap[2].i2c_adap);
-	if (ret < 0)
-		goto adap_2_failed;
-
-	fc->init_state |= FC_STATE_I2C_INIT;
-	return 0;
-
-adap_2_failed:
-	i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap);
-adap_1_failed:
-	i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap);
-	return ret;
-}
-
-void flexcop_i2c_exit(struct flexcop_device *fc)
-{
-	if (fc->init_state & FC_STATE_I2C_INIT) {
-		i2c_del_adapter(&fc->fc_i2c_adap[2].i2c_adap);
-		i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap);
-		i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap);
-	}
-	fc->init_state &= ~FC_STATE_I2C_INIT;
-}
diff --git a/drivers/media/dvb/b2c2/flexcop-misc.c b/drivers/media/dvb/b2c2/flexcop-misc.c
deleted file mode 100644
index f06f3a9..0000000
--- a/drivers/media/dvb/b2c2/flexcop-misc.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- * flexcop-misc.c - miscellaneous functions
- * see flexcop.c for copyright information
- */
-#include "flexcop.h"
-
-void flexcop_determine_revision(struct flexcop_device *fc)
-{
-	flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204);
-
-	switch (v.misc_204.Rev_N_sig_revision_hi) {
-	case 0x2:
-		deb_info("found a FlexCopII.\n");
-		fc->rev = FLEXCOP_II;
-		break;
-	case 0x3:
-		deb_info("found a FlexCopIIb.\n");
-		fc->rev = FLEXCOP_IIB;
-		break;
-	case 0x0:
-		deb_info("found a FlexCopIII.\n");
-		fc->rev = FLEXCOP_III;
-		break;
-	default:
-		err("unknown FlexCop Revision: %x. Please report this to "
-				"linux-dvb@linuxtv.org.",
-				v.misc_204.Rev_N_sig_revision_hi);
-		break;
-	}
-
-	if ((fc->has_32_hw_pid_filter = v.misc_204.Rev_N_sig_caps))
-		deb_info("this FlexCop has "
-				"the additional 32 hardware pid filter.\n");
-	else
-		deb_info("this FlexCop has "
-				"the 6 basic main hardware pid filter.\n");
-	/* bus parts have to decide if hw pid filtering is used or not. */
-}
-
-static const char *flexcop_revision_names[] = {
-	"Unknown chip",
-	"FlexCopII",
-	"FlexCopIIb",
-	"FlexCopIII",
-};
-
-static const char *flexcop_device_names[] = {
-	[FC_UNK]	= "Unknown device",
-	[FC_CABLE]	= "Cable2PC/CableStar 2 DVB-C",
-	[FC_AIR_DVBT]	= "Air2PC/AirStar 2 DVB-T",
-	[FC_AIR_ATSC1]	= "Air2PC/AirStar 2 ATSC 1st generation",
-	[FC_AIR_ATSC2]	= "Air2PC/AirStar 2 ATSC 2nd generation",
-	[FC_AIR_ATSC3]	= "Air2PC/AirStar 2 ATSC 3rd generation (HD5000)",
-	[FC_SKY_REV23]	= "Sky2PC/SkyStar 2 DVB-S rev 2.3 (old version)",
-	[FC_SKY_REV26]	= "Sky2PC/SkyStar 2 DVB-S rev 2.6",
-	[FC_SKY_REV27]	= "Sky2PC/SkyStar 2 DVB-S rev 2.7a/u",
-	[FC_SKY_REV28]	= "Sky2PC/SkyStar 2 DVB-S rev 2.8",
-};
-
-static const char *flexcop_bus_names[] = {
-	"USB",
-	"PCI",
-};
-
-void flexcop_device_name(struct flexcop_device *fc,
-		const char *prefix, const char *suffix)
-{
-	info("%s '%s' at the '%s' bus controlled by a '%s' %s",
-			prefix,	flexcop_device_names[fc->dev_type],
-			flexcop_bus_names[fc->bus_type],
-			flexcop_revision_names[fc->rev], suffix);
-}
-
-void flexcop_dump_reg(struct flexcop_device *fc,
-		flexcop_ibi_register reg, int num)
-{
-	flexcop_ibi_value v;
-	int i;
-	for (i = 0; i < num; i++) {
-		v = fc->read_ibi_reg(fc, reg+4*i);
-		deb_rdump("0x%03x: %08x, ", reg+4*i, v.raw);
-	}
-	deb_rdump("\n");
-}
-EXPORT_SYMBOL(flexcop_dump_reg);
diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c
deleted file mode 100644
index 44f8fb5..0000000
--- a/drivers/media/dvb/b2c2/flexcop-pci.c
+++ /dev/null
@@ -1,450 +0,0 @@
-/*
- * Linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- * flexcop-pci.c - covers the PCI part including DMA transfers
- * see flexcop.c for copyright information
- */
-
-#define FC_LOG_PREFIX "flexcop-pci"
-#include "flexcop-common.h"
-
-static int enable_pid_filtering = 1;
-module_param(enable_pid_filtering, int, 0444);
-MODULE_PARM_DESC(enable_pid_filtering,
-	"enable hardware pid filtering: supported values: 0 (fullts), 1");
-
-static int irq_chk_intv = 100;
-module_param(irq_chk_intv, int, 0644);
-MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ streaming watchdog.");
-
-#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
-#define dprintk(level,args...) \
-	do { if ((debug & level)) printk(args); } while (0)
-#define DEBSTATUS ""
-#else
-#define dprintk(level,args...)
-#define DEBSTATUS " (debugging is not enabled)"
-#endif
-
-#define deb_info(args...) dprintk(0x01, args)
-#define deb_reg(args...) dprintk(0x02, args)
-#define deb_ts(args...) dprintk(0x04, args)
-#define deb_irq(args...) dprintk(0x08, args)
-#define deb_chk(args...) dprintk(0x10, args)
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug,
-	"set debug level (1=info,2=regs,4=TS,8=irqdma,16=check (|-able))."
-	DEBSTATUS);
-
-#define DRIVER_VERSION "0.1"
-#define DRIVER_NAME "flexcop-pci"
-#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>"
-
-struct flexcop_pci {
-	struct pci_dev *pdev;
-
-#define FC_PCI_INIT     0x01
-#define FC_PCI_DMA_INIT 0x02
-	int init_state;
-
-	void __iomem *io_mem;
-	u32 irq;
-	/* buffersize (at least for DMA1, need to be % 188 == 0,
-	 * this logic is required */
-#define FC_DEFAULT_DMA1_BUFSIZE (1280 * 188)
-#define FC_DEFAULT_DMA2_BUFSIZE (10 * 188)
-	struct flexcop_dma dma[2];
-
-	int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */
-	u32 last_dma1_cur_pos;
-	/* position of the pointer last time the timer/packet irq occurred */
-	int count;
-	int count_prev;
-	int stream_problem;
-
-	spinlock_t irq_lock;
-	unsigned long last_irq;
-
-	struct delayed_work irq_check_work;
-	struct flexcop_device *fc_dev;
-};
-
-static int lastwreg, lastwval, lastrreg, lastrval;
-
-static flexcop_ibi_value flexcop_pci_read_ibi_reg(struct flexcop_device *fc,
-		flexcop_ibi_register r)
-{
-	struct flexcop_pci *fc_pci = fc->bus_specific;
-	flexcop_ibi_value v;
-	v.raw = readl(fc_pci->io_mem + r);
-
-	if (lastrreg != r || lastrval != v.raw) {
-		lastrreg = r; lastrval = v.raw;
-		deb_reg("new rd: %3x: %08x\n", r, v.raw);
-	}
-
-	return v;
-}
-
-static int flexcop_pci_write_ibi_reg(struct flexcop_device *fc,
-		flexcop_ibi_register r, flexcop_ibi_value v)
-{
-	struct flexcop_pci *fc_pci = fc->bus_specific;
-
-	if (lastwreg != r || lastwval != v.raw) {
-		lastwreg = r; lastwval = v.raw;
-		deb_reg("new wr: %3x: %08x\n", r, v.raw);
-	}
-
-	writel(v.raw, fc_pci->io_mem + r);
-	return 0;
-}
-
-static void flexcop_pci_irq_check_work(struct work_struct *work)
-{
-	struct flexcop_pci *fc_pci =
-		container_of(work, struct flexcop_pci, irq_check_work.work);
-	struct flexcop_device *fc = fc_pci->fc_dev;
-
-	if (fc->feedcount) {
-
-		if (fc_pci->count == fc_pci->count_prev) {
-			deb_chk("no IRQ since the last check\n");
-			if (fc_pci->stream_problem++ == 3) {
-				struct dvb_demux_feed *feed;
-				deb_info("flexcop-pci: stream problem, resetting pid filter\n");
-
-				spin_lock_irq(&fc->demux.lock);
-				list_for_each_entry(feed, &fc->demux.feed_list,
-						list_head) {
-					flexcop_pid_feed_control(fc, feed, 0);
-				}
-
-				list_for_each_entry(feed, &fc->demux.feed_list,
-						list_head) {
-					flexcop_pid_feed_control(fc, feed, 1);
-				}
-				spin_unlock_irq(&fc->demux.lock);
-
-				fc_pci->stream_problem = 0;
-			}
-		} else {
-			fc_pci->stream_problem = 0;
-			fc_pci->count_prev = fc_pci->count;
-		}
-	}
-
-	schedule_delayed_work(&fc_pci->irq_check_work,
-			msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
-}
-
-/* When PID filtering is turned on, we use the timer IRQ, because small amounts
- * of data need to be passed to the user space instantly as well. When PID
- * filtering is turned off, we use the page-change-IRQ */
-static irqreturn_t flexcop_pci_isr(int irq, void *dev_id)
-{
-	struct flexcop_pci *fc_pci = dev_id;
-	struct flexcop_device *fc = fc_pci->fc_dev;
-	unsigned long flags;
-	flexcop_ibi_value v;
-	irqreturn_t ret = IRQ_HANDLED;
-
-	spin_lock_irqsave(&fc_pci->irq_lock, flags);
-	v = fc->read_ibi_reg(fc, irq_20c);
-
-	/* errors */
-	if (v.irq_20c.Data_receiver_error)
-		deb_chk("data receiver error\n");
-	if (v.irq_20c.Continuity_error_flag)
-		deb_chk("Contunuity error flag is set\n");
-	if (v.irq_20c.LLC_SNAP_FLAG_set)
-		deb_chk("LLC_SNAP_FLAG_set is set\n");
-	if (v.irq_20c.Transport_Error)
-		deb_chk("Transport error\n");
-
-	if ((fc_pci->count % 1000) == 0)
-		deb_chk("%d valid irq took place so far\n", fc_pci->count);
-
-	if (v.irq_20c.DMA1_IRQ_Status == 1) {
-		if (fc_pci->active_dma1_addr == 0)
-			flexcop_pass_dmx_packets(fc_pci->fc_dev,
-					fc_pci->dma[0].cpu_addr0,
-					fc_pci->dma[0].size / 188);
-		else
-			flexcop_pass_dmx_packets(fc_pci->fc_dev,
-					fc_pci->dma[0].cpu_addr1,
-					fc_pci->dma[0].size / 188);
-
-		deb_irq("page change to page: %d\n",!fc_pci->active_dma1_addr);
-		fc_pci->active_dma1_addr = !fc_pci->active_dma1_addr;
-		/* for the timer IRQ we only can use buffer dmx feeding, because we don't have
-		 * complete TS packets when reading from the DMA memory */
-	} else if (v.irq_20c.DMA1_Timer_Status == 1) {
-		dma_addr_t cur_addr =
-			fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2;
-		u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0;
-
-		deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, "
-			"last_cur_pos: %08x ",
-				jiffies_to_usecs(jiffies - fc_pci->last_irq),
-				v.raw, (unsigned long long)cur_addr, cur_pos,
-				fc_pci->last_dma1_cur_pos);
-		fc_pci->last_irq = jiffies;
-
-		/* buffer end was reached, restarted from the beginning
-		 * pass the data from last_cur_pos to the buffer end to the demux
-		 */
-		if (cur_pos < fc_pci->last_dma1_cur_pos) {
-			deb_irq(" end was reached: passing %d bytes ",
-				(fc_pci->dma[0].size*2 - 1) -
-				fc_pci->last_dma1_cur_pos);
-			flexcop_pass_dmx_data(fc_pci->fc_dev,
-				fc_pci->dma[0].cpu_addr0 +
-					fc_pci->last_dma1_cur_pos,
-				(fc_pci->dma[0].size*2) -
-					fc_pci->last_dma1_cur_pos);
-			fc_pci->last_dma1_cur_pos = 0;
-		}
-
-		if (cur_pos > fc_pci->last_dma1_cur_pos) {
-			deb_irq(" passing %d bytes ",
-				cur_pos - fc_pci->last_dma1_cur_pos);
-			flexcop_pass_dmx_data(fc_pci->fc_dev,
-				fc_pci->dma[0].cpu_addr0 +
-					fc_pci->last_dma1_cur_pos,
-				cur_pos - fc_pci->last_dma1_cur_pos);
-		}
-		deb_irq("\n");
-
-		fc_pci->last_dma1_cur_pos = cur_pos;
-		fc_pci->count++;
-	} else {
-		deb_irq("isr for flexcop called, "
-			"apparently without reason (%08x)\n", v.raw);
-		ret = IRQ_NONE;
-	}
-
-	spin_unlock_irqrestore(&fc_pci->irq_lock, flags);
-	return ret;
-}
-
-static int flexcop_pci_stream_control(struct flexcop_device *fc, int onoff)
-{
-	struct flexcop_pci *fc_pci = fc->bus_specific;
-	if (onoff) {
-		flexcop_dma_config(fc, &fc_pci->dma[0], FC_DMA_1);
-		flexcop_dma_config(fc, &fc_pci->dma[1], FC_DMA_2);
-		flexcop_dma_config_timer(fc, FC_DMA_1, 0);
-		flexcop_dma_xfer_control(fc, FC_DMA_1,
-				FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1, 1);
-		deb_irq("DMA xfer enabled\n");
-
-		fc_pci->last_dma1_cur_pos = 0;
-		flexcop_dma_control_timer_irq(fc, FC_DMA_1, 1);
-		deb_irq("IRQ enabled\n");
-		fc_pci->count_prev = fc_pci->count;
-	} else {
-		flexcop_dma_control_timer_irq(fc, FC_DMA_1, 0);
-		deb_irq("IRQ disabled\n");
-
-		flexcop_dma_xfer_control(fc, FC_DMA_1,
-			 FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1, 0);
-		deb_irq("DMA xfer disabled\n");
-	}
-	return 0;
-}
-
-static int flexcop_pci_dma_init(struct flexcop_pci *fc_pci)
-{
-	int ret;
-	ret = flexcop_dma_allocate(fc_pci->pdev, &fc_pci->dma[0],
-			FC_DEFAULT_DMA1_BUFSIZE);
-	if (ret != 0)
-		return ret;
-
-	ret = flexcop_dma_allocate(fc_pci->pdev, &fc_pci->dma[1],
-			FC_DEFAULT_DMA2_BUFSIZE);
-	if (ret != 0) {
-		flexcop_dma_free(&fc_pci->dma[0]);
-		return ret;
-	}
-
-	flexcop_sram_set_dest(fc_pci->fc_dev, FC_SRAM_DEST_MEDIA |
-			FC_SRAM_DEST_NET, FC_SRAM_DEST_TARGET_DMA1);
-	flexcop_sram_set_dest(fc_pci->fc_dev, FC_SRAM_DEST_CAO |
-			FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_DMA2);
-	fc_pci->init_state |= FC_PCI_DMA_INIT;
-	return ret;
-}
-
-static void flexcop_pci_dma_exit(struct flexcop_pci *fc_pci)
-{
-	if (fc_pci->init_state & FC_PCI_DMA_INIT) {
-		flexcop_dma_free(&fc_pci->dma[0]);
-		flexcop_dma_free(&fc_pci->dma[1]);
-	}
-	fc_pci->init_state &= ~FC_PCI_DMA_INIT;
-}
-
-static int flexcop_pci_init(struct flexcop_pci *fc_pci)
-{
-	int ret;
-
-	info("card revision %x", fc_pci->pdev->revision);
-
-	if ((ret = pci_enable_device(fc_pci->pdev)) != 0)
-		return ret;
-	pci_set_master(fc_pci->pdev);
-
-	if ((ret = pci_request_regions(fc_pci->pdev, DRIVER_NAME)) != 0)
-		goto err_pci_disable_device;
-
-	fc_pci->io_mem = pci_iomap(fc_pci->pdev, 0, 0x800);
-
-	if (!fc_pci->io_mem) {
-		err("cannot map io memory\n");
-		ret = -EIO;
-		goto err_pci_release_regions;
-	}
-
-	pci_set_drvdata(fc_pci->pdev, fc_pci);
-	spin_lock_init(&fc_pci->irq_lock);
-	if ((ret = request_irq(fc_pci->pdev->irq, flexcop_pci_isr,
-					IRQF_SHARED, DRIVER_NAME, fc_pci)) != 0)
-		goto err_pci_iounmap;
-
-	fc_pci->init_state |= FC_PCI_INIT;
-	return ret;
-
-err_pci_iounmap:
-	pci_iounmap(fc_pci->pdev, fc_pci->io_mem);
-	pci_set_drvdata(fc_pci->pdev, NULL);
-err_pci_release_regions:
-	pci_release_regions(fc_pci->pdev);
-err_pci_disable_device:
-	pci_disable_device(fc_pci->pdev);
-	return ret;
-}
-
-static void flexcop_pci_exit(struct flexcop_pci *fc_pci)
-{
-	if (fc_pci->init_state & FC_PCI_INIT) {
-		free_irq(fc_pci->pdev->irq, fc_pci);
-		pci_iounmap(fc_pci->pdev, fc_pci->io_mem);
-		pci_set_drvdata(fc_pci->pdev, NULL);
-		pci_release_regions(fc_pci->pdev);
-		pci_disable_device(fc_pci->pdev);
-	}
-	fc_pci->init_state &= ~FC_PCI_INIT;
-}
-
-static int flexcop_pci_probe(struct pci_dev *pdev,
-		const struct pci_device_id *ent)
-{
-	struct flexcop_device *fc;
-	struct flexcop_pci *fc_pci;
-	int ret = -ENOMEM;
-
-	if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_pci))) == NULL) {
-		err("out of memory\n");
-		return -ENOMEM;
-	}
-
-	/* general flexcop init */
-	fc_pci = fc->bus_specific;
-	fc_pci->fc_dev = fc;
-
-	fc->read_ibi_reg = flexcop_pci_read_ibi_reg;
-	fc->write_ibi_reg = flexcop_pci_write_ibi_reg;
-	fc->i2c_request = flexcop_i2c_request;
-	fc->get_mac_addr = flexcop_eeprom_check_mac_addr;
-	fc->stream_control = flexcop_pci_stream_control;
-
-	if (enable_pid_filtering)
-		info("will use the HW PID filter.");
-	else
-		info("will pass the complete TS to the demuxer.");
-
-	fc->pid_filtering = enable_pid_filtering;
-	fc->bus_type = FC_PCI;
-	fc->dev = &pdev->dev;
-	fc->owner = THIS_MODULE;
-
-	/* bus specific part */
-	fc_pci->pdev = pdev;
-	if ((ret = flexcop_pci_init(fc_pci)) != 0)
-		goto err_kfree;
-
-	/* init flexcop */
-	if ((ret = flexcop_device_initialize(fc)) != 0)
-		goto err_pci_exit;
-
-	/* init dma */
-	if ((ret = flexcop_pci_dma_init(fc_pci)) != 0)
-		goto err_fc_exit;
-
-	INIT_DELAYED_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work);
-
-	if (irq_chk_intv > 0)
-		schedule_delayed_work(&fc_pci->irq_check_work,
-				msecs_to_jiffies(irq_chk_intv < 100 ?
-					100 :
-					irq_chk_intv));
-	return ret;
-
-err_fc_exit:
-	flexcop_device_exit(fc);
-err_pci_exit:
-	flexcop_pci_exit(fc_pci);
-err_kfree:
-	flexcop_device_kfree(fc);
-	return ret;
-}
-
-/* in theory every _exit function should be called exactly two times,
- * here and in the bail-out-part of the _init-function
- */
-static void flexcop_pci_remove(struct pci_dev *pdev)
-{
-	struct flexcop_pci *fc_pci = pci_get_drvdata(pdev);
-
-	if (irq_chk_intv > 0)
-		cancel_delayed_work(&fc_pci->irq_check_work);
-
-	flexcop_pci_dma_exit(fc_pci);
-	flexcop_device_exit(fc_pci->fc_dev);
-	flexcop_pci_exit(fc_pci);
-	flexcop_device_kfree(fc_pci->fc_dev);
-}
-
-static struct pci_device_id flexcop_pci_tbl[] = {
-	{ PCI_DEVICE(0x13d0, 0x2103) },
-	{ },
-};
-
-MODULE_DEVICE_TABLE(pci, flexcop_pci_tbl);
-
-static struct pci_driver flexcop_pci_driver = {
-	.name     = "b2c2_flexcop_pci",
-	.id_table = flexcop_pci_tbl,
-	.probe    = flexcop_pci_probe,
-	.remove   = flexcop_pci_remove,
-};
-
-static int __init flexcop_pci_module_init(void)
-{
-	return pci_register_driver(&flexcop_pci_driver);
-}
-
-static void __exit flexcop_pci_module_exit(void)
-{
-	pci_unregister_driver(&flexcop_pci_driver);
-}
-
-module_init(flexcop_pci_module_init);
-module_exit(flexcop_pci_module_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_NAME);
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/b2c2/flexcop-reg.h b/drivers/media/dvb/b2c2/flexcop-reg.h
deleted file mode 100644
index dc4528d..0000000
--- a/drivers/media/dvb/b2c2/flexcop-reg.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- * flexcop-reg.h - register abstraction for FlexCopII, FlexCopIIb and FlexCopIII
- * see flexcop.c for copyright information
- */
-#ifndef __FLEXCOP_REG_H__
-#define __FLEXCOP_REG_H__
-
-typedef enum {
-	FLEXCOP_UNK = 0,
-	FLEXCOP_II,
-	FLEXCOP_IIB,
-	FLEXCOP_III,
-} flexcop_revision_t;
-
-typedef enum {
-	FC_UNK = 0,
-	FC_CABLE,
-	FC_AIR_DVBT,
-	FC_AIR_ATSC1,
-	FC_AIR_ATSC2,
-	FC_AIR_ATSC3,
-	FC_SKY_REV23,
-	FC_SKY_REV26,
-	FC_SKY_REV27,
-	FC_SKY_REV28,
-} flexcop_device_type_t;
-
-typedef enum {
-	FC_USB = 0,
-	FC_PCI,
-} flexcop_bus_t;
-
-/* FlexCop IBI Registers */
-#if defined(__LITTLE_ENDIAN)
-#include "flexcop_ibi_value_le.h"
-#else
-#if defined(__BIG_ENDIAN)
-#include "flexcop_ibi_value_be.h"
-#else
-#error no endian defined
-#endif
-#endif
-
-#define fc_data_Tag_ID_DVB  0x3e
-#define fc_data_Tag_ID_ATSC 0x3f
-#define fc_data_Tag_ID_IDSB 0x8b
-
-#define fc_key_code_default 0x1
-#define fc_key_code_even    0x2
-#define fc_key_code_odd     0x3
-
-extern flexcop_ibi_value ibi_zero;
-
-typedef enum {
-	FC_I2C_PORT_DEMOD  = 1,
-	FC_I2C_PORT_EEPROM = 2,
-	FC_I2C_PORT_TUNER  = 3,
-} flexcop_i2c_port_t;
-
-typedef enum {
-	FC_WRITE = 0,
-	FC_READ  = 1,
-} flexcop_access_op_t;
-
-typedef enum {
-	FC_SRAM_DEST_NET   = 1,
-	FC_SRAM_DEST_CAI   = 2,
-	FC_SRAM_DEST_CAO   = 4,
-	FC_SRAM_DEST_MEDIA = 8
-} flexcop_sram_dest_t;
-
-typedef enum {
-	FC_SRAM_DEST_TARGET_WAN_USB = 0,
-	FC_SRAM_DEST_TARGET_DMA1    = 1,
-	FC_SRAM_DEST_TARGET_DMA2    = 2,
-	FC_SRAM_DEST_TARGET_FC3_CA  = 3
-} flexcop_sram_dest_target_t;
-
-typedef enum {
-	FC_SRAM_2_32KB  = 0, /*  64KB */
-	FC_SRAM_1_32KB  = 1, /*  32KB - default fow FCII */
-	FC_SRAM_1_128KB = 2, /* 128KB */
-	FC_SRAM_1_48KB  = 3, /*  48KB - default for FCIII */
-} flexcop_sram_type_t;
-
-typedef enum {
-	FC_WAN_SPEED_4MBITS  = 0,
-	FC_WAN_SPEED_8MBITS  = 1,
-	FC_WAN_SPEED_12MBITS = 2,
-	FC_WAN_SPEED_16MBITS = 3,
-} flexcop_wan_speed_t;
-
-typedef enum {
-	FC_DMA_1 = 1,
-	FC_DMA_2 = 2,
-} flexcop_dma_index_t;
-
-typedef enum {
-	FC_DMA_SUBADDR_0 = 1,
-	FC_DMA_SUBADDR_1 = 2,
-} flexcop_dma_addr_index_t;
-
-/* names of the particular registers */
-typedef enum {
-	dma1_000            = 0x000,
-	dma1_004            = 0x004,
-	dma1_008            = 0x008,
-	dma1_00c            = 0x00c,
-	dma2_010            = 0x010,
-	dma2_014            = 0x014,
-	dma2_018            = 0x018,
-	dma2_01c            = 0x01c,
-
-	tw_sm_c_100         = 0x100,
-	tw_sm_c_104         = 0x104,
-	tw_sm_c_108         = 0x108,
-	tw_sm_c_10c         = 0x10c,
-	tw_sm_c_110         = 0x110,
-
-	lnb_switch_freq_200 = 0x200,
-	misc_204            = 0x204,
-	ctrl_208            = 0x208,
-	irq_20c             = 0x20c,
-	sw_reset_210        = 0x210,
-	misc_214            = 0x214,
-	mbox_v8_to_host_218 = 0x218,
-	mbox_host_to_v8_21c = 0x21c,
-
-	pid_filter_300      = 0x300,
-	pid_filter_304      = 0x304,
-	pid_filter_308      = 0x308,
-	pid_filter_30c      = 0x30c,
-	index_reg_310       = 0x310,
-	pid_n_reg_314       = 0x314,
-	mac_low_reg_318     = 0x318,
-	mac_high_reg_31c    = 0x31c,
-
-	data_tag_400        = 0x400,
-	card_id_408         = 0x408,
-	card_id_40c         = 0x40c,
-	mac_address_418     = 0x418,
-	mac_address_41c     = 0x41c,
-
-	ci_600              = 0x600,
-	pi_604              = 0x604,
-	pi_608              = 0x608,
-	dvb_reg_60c         = 0x60c,
-
-	sram_ctrl_reg_700   = 0x700,
-	net_buf_reg_704     = 0x704,
-	cai_buf_reg_708     = 0x708,
-	cao_buf_reg_70c     = 0x70c,
-	media_buf_reg_710   = 0x710,
-	sram_dest_reg_714   = 0x714,
-	net_buf_reg_718     = 0x718,
-	wan_ctrl_reg_71c    = 0x71c,
-} flexcop_ibi_register;
-
-#define flexcop_set_ibi_value(reg,attr,val) { \
-	flexcop_ibi_value v = fc->read_ibi_reg(fc,reg); \
-	v.reg.attr = val; \
-	fc->write_ibi_reg(fc,reg,v); \
-}
-
-#endif
diff --git a/drivers/media/dvb/b2c2/flexcop-sram.c b/drivers/media/dvb/b2c2/flexcop-sram.c
deleted file mode 100644
index f2199e4..0000000
--- a/drivers/media/dvb/b2c2/flexcop-sram.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- * flexcop-sram.c - functions for controlling the SRAM
- * see flexcop.c for copyright information
- */
-#include "flexcop.h"
-
-static void flexcop_sram_set_chip(struct flexcop_device *fc,
-		flexcop_sram_type_t type)
-{
-	flexcop_set_ibi_value(wan_ctrl_reg_71c, sram_chip, type);
-}
-
-int flexcop_sram_init(struct flexcop_device *fc)
-{
-	switch (fc->rev) {
-	case FLEXCOP_II:
-	case FLEXCOP_IIB:
-		flexcop_sram_set_chip(fc, FC_SRAM_1_32KB);
-		break;
-	case FLEXCOP_III:
-		flexcop_sram_set_chip(fc, FC_SRAM_1_48KB);
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest,
-		 flexcop_sram_dest_target_t target)
-{
-	flexcop_ibi_value v;
-	v = fc->read_ibi_reg(fc, sram_dest_reg_714);
-
-	if (fc->rev != FLEXCOP_III && target == FC_SRAM_DEST_TARGET_FC3_CA) {
-		err("SRAM destination target to available on FlexCopII(b)\n");
-		return -EINVAL;
-	}
-	deb_sram("sram dest: %x target: %x\n", dest, target);
-
-	if (dest & FC_SRAM_DEST_NET)
-		v.sram_dest_reg_714.NET_Dest = target;
-	if (dest & FC_SRAM_DEST_CAI)
-		v.sram_dest_reg_714.CAI_Dest = target;
-	if (dest & FC_SRAM_DEST_CAO)
-		v.sram_dest_reg_714.CAO_Dest = target;
-	if (dest & FC_SRAM_DEST_MEDIA)
-		v.sram_dest_reg_714.MEDIA_Dest = target;
-
-	fc->write_ibi_reg(fc,sram_dest_reg_714,v);
-	udelay(1000); /* TODO delay really necessary */
-
-	return 0;
-}
-EXPORT_SYMBOL(flexcop_sram_set_dest);
-
-void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s)
-{
-	flexcop_set_ibi_value(wan_ctrl_reg_71c,wan_speed_sig,s);
-}
-EXPORT_SYMBOL(flexcop_wan_set_speed);
-
-void flexcop_sram_ctrl(struct flexcop_device *fc, int usb_wan, int sramdma, int maximumfill)
-{
-	flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714);
-	v.sram_dest_reg_714.ctrl_usb_wan = usb_wan;
-	v.sram_dest_reg_714.ctrl_sramdma = sramdma;
-	v.sram_dest_reg_714.ctrl_maximumfill = maximumfill;
-	fc->write_ibi_reg(fc,sram_dest_reg_714,v);
-}
-EXPORT_SYMBOL(flexcop_sram_ctrl);
-
-#if 0
-static void flexcop_sram_write(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len)
-{
-	int i, retries;
-	u32 command;
-
-	for (i = 0; i < len; i++) {
-		command = bank | addr | 0x04000000 | (*buf << 0x10);
-
-		retries = 2;
-
-		while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
-			mdelay(1);
-			retries--;
-		};
-
-		if (retries == 0)
-			printk("%s: SRAM timeout\n", __func__);
-
-		write_reg_dw(adapter, 0x700, command);
-
-		buf++;
-		addr++;
-	}
-}
-
-static void flex_sram_read(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len)
-{
-	int i, retries;
-	u32 command, value;
-
-	for (i = 0; i < len; i++) {
-		command = bank | addr | 0x04008000;
-
-		retries = 10000;
-
-		while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
-			mdelay(1);
-			retries--;
-		};
-
-		if (retries == 0)
-			printk("%s: SRAM timeout\n", __func__);
-
-		write_reg_dw(adapter, 0x700, command);
-
-		retries = 10000;
-
-		while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
-			mdelay(1);
-			retries--;
-		};
-
-		if (retries == 0)
-			printk("%s: SRAM timeout\n", __func__);
-
-		value = read_reg_dw(adapter, 0x700) >> 0x10;
-
-		*buf = (value & 0xff);
-
-		addr++;
-		buf++;
-	}
-}
-
-static void sram_write_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len)
-{
-	u32 bank;
-
-	bank = 0;
-
-	if (adapter->dw_sram_type == 0x20000) {
-		bank = (addr & 0x18000) << 0x0d;
-	}
-
-	if (adapter->dw_sram_type == 0x00000) {
-		if ((addr >> 0x0f) == 0)
-			bank = 0x20000000;
-		else
-			bank = 0x10000000;
-	}
-	flex_sram_write(adapter, bank, addr & 0x7fff, buf, len);
-}
-
-static void sram_read_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len)
-{
-	u32 bank;
-	bank = 0;
-
-	if (adapter->dw_sram_type == 0x20000) {
-		bank = (addr & 0x18000) << 0x0d;
-	}
-
-	if (adapter->dw_sram_type == 0x00000) {
-		if ((addr >> 0x0f) == 0)
-			bank = 0x20000000;
-		else
-			bank = 0x10000000;
-	}
-	flex_sram_read(adapter, bank, addr & 0x7fff, buf, len);
-}
-
-static void sram_read(struct adapter *adapter, u32 addr, u8 *buf, u32 len)
-{
-	u32 length;
-	while (len != 0) {
-		length = len;
-		/* check if the address range belongs to the same
-		 * 32K memory chip. If not, the data is read
-		 * from one chip at a time */
-		if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) {
-			length = (((addr >> 0x0f) + 1) << 0x0f) - addr;
-		}
-
-		sram_read_chunk(adapter, addr, buf, length);
-		addr = addr + length;
-		buf = buf + length;
-		len = len - length;
-	}
-}
-
-static void sram_write(struct adapter *adapter, u32 addr, u8 *buf, u32 len)
-{
-	u32 length;
-	while (len != 0) {
-		length = len;
-
-		/* check if the address range belongs to the same
-		 * 32K memory chip. If not, the data is
-		 * written to one chip at a time */
-		if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) {
-			length = (((addr >> 0x0f) + 1) << 0x0f) - addr;
-		}
-
-		sram_write_chunk(adapter, addr, buf, length);
-		addr = addr + length;
-		buf = buf + length;
-		len = len - length;
-	}
-}
-
-static void sram_set_size(struct adapter *adapter, u32 mask)
-{
-	write_reg_dw(adapter, 0x71c,
-			(mask | (~0x30000 & read_reg_dw(adapter, 0x71c))));
-}
-
-static void sram_init(struct adapter *adapter)
-{
-	u32 tmp;
-	tmp = read_reg_dw(adapter, 0x71c);
-	write_reg_dw(adapter, 0x71c, 1);
-
-	if (read_reg_dw(adapter, 0x71c) != 0) {
-		write_reg_dw(adapter, 0x71c, tmp);
-		adapter->dw_sram_type = tmp & 0x30000;
-		ddprintk("%s: dw_sram_type = %x\n", __func__, adapter->dw_sram_type);
-	} else {
-		adapter->dw_sram_type = 0x10000;
-		ddprintk("%s: dw_sram_type = %x\n", __func__, adapter->dw_sram_type);
-	}
-}
-
-static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr)
-{
-	u8 tmp1, tmp2;
-	dprintk("%s: mask = %x, addr = %x\n", __func__, mask, addr);
-
-	sram_set_size(adapter, mask);
-	sram_init(adapter);
-
-	tmp2 = 0xa5;
-	tmp1 = 0x4f;
-
-	sram_write(adapter, addr, &tmp2, 1);
-	sram_write(adapter, addr + 4, &tmp1, 1);
-
-	tmp2 = 0;
-	mdelay(20);
-
-	sram_read(adapter, addr, &tmp2, 1);
-	sram_read(adapter, addr, &tmp2, 1);
-
-	dprintk("%s: wrote 0xa5, read 0x%2x\n", __func__, tmp2);
-
-	if (tmp2 != 0xa5)
-		return 0;
-
-	tmp2 = 0x5a;
-	tmp1 = 0xf4;
-
-	sram_write(adapter, addr, &tmp2, 1);
-	sram_write(adapter, addr + 4, &tmp1, 1);
-
-	tmp2 = 0;
-	mdelay(20);
-
-	sram_read(adapter, addr, &tmp2, 1);
-	sram_read(adapter, addr, &tmp2, 1);
-
-	dprintk("%s: wrote 0x5a, read 0x%2x\n", __func__, tmp2);
-
-	if (tmp2 != 0x5a)
-		return 0;
-	return 1;
-}
-
-static u32 sram_length(struct adapter *adapter)
-{
-	if (adapter->dw_sram_type == 0x10000)
-		return 32768; /* 32K */
-	if (adapter->dw_sram_type == 0x00000)
-		return 65536; /* 64K */
-	if (adapter->dw_sram_type == 0x20000)
-		return 131072; /* 128K */
-	return 32768; /* 32K */
-}
-
-/* FlexcopII can work with 32K, 64K or 128K of external SRAM memory.
-   - for 128K there are 4x32K chips at bank 0,1,2,3.
-   - for  64K there are 2x32K chips at bank 1,2.
-   - for  32K there is one 32K chip at bank 0.
-
-   FlexCop works only with one bank at a time. The bank is selected
-   by bits 28-29 of the 0x700 register.
-
-   bank 0 covers addresses 0x00000-0x07fff
-   bank 1 covers addresses 0x08000-0x0ffff
-   bank 2 covers addresses 0x10000-0x17fff
-   bank 3 covers addresses 0x18000-0x1ffff */
-
-static int flexcop_sram_detect(struct flexcop_device *fc)
-{
-	flexcop_ibi_value r208, r71c_0, vr71c_1;
-	r208 = fc->read_ibi_reg(fc, ctrl_208);
-	fc->write_ibi_reg(fc, ctrl_208, ibi_zero);
-
-	r71c_0 = fc->read_ibi_reg(fc, wan_ctrl_reg_71c);
-	write_reg_dw(adapter, 0x71c, 1);
-	tmp3 = read_reg_dw(adapter, 0x71c);
-	dprintk("%s: tmp3 = %x\n", __func__, tmp3);
-	write_reg_dw(adapter, 0x71c, tmp2);
-
-	// check for internal SRAM ???
-	tmp3--;
-	if (tmp3 != 0) {
-		sram_set_size(adapter, 0x10000);
-		sram_init(adapter);
-		write_reg_dw(adapter, 0x208, tmp);
-		dprintk("%s: sram size = 32K\n", __func__);
-		return 32;
-	}
-
-	if (sram_test_location(adapter, 0x20000, 0x18000) != 0) {
-		sram_set_size(adapter, 0x20000);
-		sram_init(adapter);
-		write_reg_dw(adapter, 0x208, tmp);
-		dprintk("%s: sram size = 128K\n", __func__);
-		return 128;
-	}
-
-	if (sram_test_location(adapter, 0x00000, 0x10000) != 0) {
-		sram_set_size(adapter, 0x00000);
-		sram_init(adapter);
-		write_reg_dw(adapter, 0x208, tmp);
-		dprintk("%s: sram size = 64K\n", __func__);
-		return 64;
-	}
-
-	if (sram_test_location(adapter, 0x10000, 0x00000) != 0) {
-		sram_set_size(adapter, 0x10000);
-		sram_init(adapter);
-		write_reg_dw(adapter, 0x208, tmp);
-		dprintk("%s: sram size = 32K\n", __func__);
-		return 32;
-	}
-
-	sram_set_size(adapter, 0x10000);
-	sram_init(adapter);
-	write_reg_dw(adapter, 0x208, tmp);
-	dprintk("%s: SRAM detection failed. Set to 32K \n", __func__);
-	return 0;
-}
-
-static void sll_detect_sram_size(struct adapter *adapter)
-{
-	sram_detect_for_flex2(adapter);
-}
-
-#endif
diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c
deleted file mode 100644
index 26c666d..0000000
--- a/drivers/media/dvb/b2c2/flexcop-usb.c
+++ /dev/null
@@ -1,590 +0,0 @@
-/*
- * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- * flexcop-usb.c - covers the USB part
- * see flexcop.c for copyright information
- */
-#define FC_LOG_PREFIX "flexcop_usb"
-#include "flexcop-usb.h"
-#include "flexcop-common.h"
-
-/* Version information */
-#define DRIVER_VERSION "0.1"
-#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV USB Driver"
-#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>"
-
-/* debug */
-#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
-#define dprintk(level,args...) \
-	do { if ((debug & level)) printk(args); } while (0)
-
-#define debug_dump(b, l, method) do {\
-	int i; \
-	for (i = 0; i < l; i++) \
-		method("%02x ", b[i]); \
-	method("\n"); \
-} while (0)
-
-#define DEBSTATUS ""
-#else
-#define dprintk(level, args...)
-#define debug_dump(b, l, method)
-#define DEBSTATUS " (debugging is not enabled)"
-#endif
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,"
-		"ctrl=4,i2c=8,v8mem=16 (or-able))." DEBSTATUS);
-#undef DEBSTATUS
-
-#define deb_info(args...) dprintk(0x01, args)
-#define deb_ts(args...) dprintk(0x02, args)
-#define deb_ctrl(args...) dprintk(0x04, args)
-#define deb_i2c(args...) dprintk(0x08, args)
-#define deb_v8(args...) dprintk(0x10, args)
-
-/* JLP 111700: we will include the 1 bit gap between the upper and lower 3 bits
- * in the IBI address, to make the V8 code simpler.
- * PCI ADDRESS FORMAT: 0x71C -> 0000 0111 0001 1100 (the six bits used)
- *                  in general: 0000 0HHH 000L LL00
- * IBI ADDRESS FORMAT:                    RHHH BLLL
- *
- * where R is the read(1)/write(0) bit, B is the busy bit
- * and HHH and LLL are the two sets of three bits from the PCI address.
- */
-#define B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(usPCI) (u8) \
-	(((usPCI >> 2) & 0x07) + ((usPCI >> 4) & 0x70))
-#define B2C2_FLEX_INTERNALADDR_TO_PCIOFFSET(ucAddr) (u16) \
-	(((ucAddr & 0x07) << 2) + ((ucAddr & 0x70) << 4))
-
-/*
- * DKT 020228
- * - forget about this VENDOR_BUFFER_SIZE, read and write register
- *   deal with DWORD or 4 bytes, that should be should from now on
- * - from now on, we don't support anything older than firm 1.00
- *   I eliminated the write register as a 2 trip of writing hi word and lo word
- *   and force this to write only 4 bytes at a time.
- *   NOTE: this should work with all the firmware from 1.00 and newer
- */
-static int flexcop_usb_readwrite_dw(struct flexcop_device *fc, u16 wRegOffsPCI, u32 *val, u8 read)
-{
-	struct flexcop_usb *fc_usb = fc->bus_specific;
-	u8 request = read ? B2C2_USB_READ_REG : B2C2_USB_WRITE_REG;
-	u8 request_type = (read ? USB_DIR_IN : USB_DIR_OUT) | USB_TYPE_VENDOR;
-	u8 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) |
-		(read ? 0x80 : 0);
-
-	int len = usb_control_msg(fc_usb->udev,
-			read ? B2C2_USB_CTRL_PIPE_IN : B2C2_USB_CTRL_PIPE_OUT,
-			request,
-			request_type, /* 0xc0 read or 0x40 write */
-			wAddress,
-			0,
-			val,
-			sizeof(u32),
-			B2C2_WAIT_FOR_OPERATION_RDW * HZ);
-
-	if (len != sizeof(u32)) {
-		err("error while %s dword from %d (%d).", read ? "reading" :
-				"writing", wAddress, wRegOffsPCI);
-		return -EIO;
-	}
-	return 0;
-}
-/*
- * DKT 010817 - add support for V8 memory read/write and flash update
- */
-static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb,
-		flexcop_usb_request_t req, u8 page, u16 wAddress,
-		u8 *pbBuffer, u32 buflen)
-{
-	u8 request_type = USB_TYPE_VENDOR;
-	u16 wIndex;
-	int nWaitTime, pipe, len;
-	wIndex = page << 8;
-
-	switch (req) {
-	case B2C2_USB_READ_V8_MEM:
-		nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ;
-		request_type |= USB_DIR_IN;
-		pipe = B2C2_USB_CTRL_PIPE_IN;
-		break;
-	case B2C2_USB_WRITE_V8_MEM:
-		wIndex |= pbBuffer[0];
-		request_type |= USB_DIR_OUT;
-		nWaitTime = B2C2_WAIT_FOR_OPERATION_V8WRITE;
-		pipe = B2C2_USB_CTRL_PIPE_OUT;
-		break;
-	case B2C2_USB_FLASH_BLOCK:
-		request_type |= USB_DIR_OUT;
-		nWaitTime = B2C2_WAIT_FOR_OPERATION_V8FLASH;
-		pipe = B2C2_USB_CTRL_PIPE_OUT;
-		break;
-	default:
-		deb_info("unsupported request for v8_mem_req %x.\n", req);
-		return -EINVAL;
-	}
-	deb_v8("v8mem: %02x %02x %04x %04x, len: %d\n", request_type, req,
-			wAddress, wIndex, buflen);
-
-	len = usb_control_msg(fc_usb->udev, pipe,
-			req,
-			request_type,
-			wAddress,
-			wIndex,
-			pbBuffer,
-			buflen,
-			nWaitTime * HZ);
-
-	debug_dump(pbBuffer, len, deb_v8);
-	return len == buflen ? 0 : -EIO;
-}
-
-#define bytes_left_to_read_on_page(paddr,buflen) \
-	((V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)) > buflen \
-	 ? buflen : (V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)))
-
-static int flexcop_usb_memory_req(struct flexcop_usb *fc_usb,
-		flexcop_usb_request_t req, flexcop_usb_mem_page_t page_start,
-		u32 addr, int extended, u8 *buf, u32 len)
-{
-	int i,ret = 0;
-	u16 wMax;
-	u32 pagechunk = 0;
-
-	switch(req) {
-	case B2C2_USB_READ_V8_MEM:
-		wMax = USB_MEM_READ_MAX;
-		break;
-	case B2C2_USB_WRITE_V8_MEM:
-		wMax = USB_MEM_WRITE_MAX;
-		break;
-	case B2C2_USB_FLASH_BLOCK:
-		wMax = USB_FLASH_MAX;
-		break;
-	default:
-		return -EINVAL;
-		break;
-	}
-	for (i = 0; i < len;) {
-		pagechunk =
-			wMax < bytes_left_to_read_on_page(addr, len) ?
-				wMax :
-				bytes_left_to_read_on_page(addr, len);
-		deb_info("%x\n",
-			(addr & V8_MEMORY_PAGE_MASK) |
-				(V8_MEMORY_EXTENDED*extended));
-
-		ret = flexcop_usb_v8_memory_req(fc_usb, req,
-			page_start + (addr / V8_MEMORY_PAGE_SIZE),
-			(addr & V8_MEMORY_PAGE_MASK) |
-				(V8_MEMORY_EXTENDED*extended),
-			&buf[i], pagechunk);
-
-		if (ret < 0)
-			return ret;
-		addr += pagechunk;
-		len -= pagechunk;
-	}
-	return 0;
-}
-
-static int flexcop_usb_get_mac_addr(struct flexcop_device *fc, int extended)
-{
-	return flexcop_usb_memory_req(fc->bus_specific, B2C2_USB_READ_V8_MEM,
-		V8_MEMORY_PAGE_FLASH, 0x1f010, 1,
-		fc->dvb_adapter.proposed_mac, 6);
-}
-
-#if 0
-static int flexcop_usb_utility_req(struct flexcop_usb *fc_usb, int set,
-		flexcop_usb_utility_function_t func, u8 extra, u16 wIndex,
-		u16 buflen, u8 *pvBuffer)
-{
-	u16 wValue;
-	u8 request_type = (set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR;
-	int nWaitTime = 2,
-	    pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN, len;
-	wValue = (func << 8) | extra;
-
-	len = usb_control_msg(fc_usb->udev,pipe,
-			B2C2_USB_UTILITY,
-			request_type,
-			wValue,
-			wIndex,
-			pvBuffer,
-			buflen,
-			nWaitTime * HZ);
-	return len == buflen ? 0 : -EIO;
-}
-#endif
-
-/* usb i2c stuff */
-static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c,
-		flexcop_usb_request_t req, flexcop_usb_i2c_function_t func,
-		u8 chipaddr, u8 addr, u8 *buf, u8 buflen)
-{
-	struct flexcop_usb *fc_usb = i2c->fc->bus_specific;
-	u16 wValue, wIndex;
-	int nWaitTime,pipe,len;
-	u8 request_type = USB_TYPE_VENDOR;
-
-	switch (func) {
-	case USB_FUNC_I2C_WRITE:
-	case USB_FUNC_I2C_MULTIWRITE:
-	case USB_FUNC_I2C_REPEATWRITE:
-		/* DKT 020208 - add this to support special case of DiSEqC */
-	case USB_FUNC_I2C_CHECKWRITE:
-		pipe = B2C2_USB_CTRL_PIPE_OUT;
-		nWaitTime = 2;
-		request_type |= USB_DIR_OUT;
-		break;
-	case USB_FUNC_I2C_READ:
-	case USB_FUNC_I2C_REPEATREAD:
-		pipe = B2C2_USB_CTRL_PIPE_IN;
-		nWaitTime = 2;
-		request_type |= USB_DIR_IN;
-		break;
-	default:
-		deb_info("unsupported function for i2c_req %x\n", func);
-		return -EINVAL;
-	}
-	wValue = (func << 8) | (i2c->port << 4);
-	wIndex = (chipaddr << 8 ) | addr;
-
-	deb_i2c("i2c %2d: %02x %02x %02x %02x %02x %02x\n",
-			func, request_type, req,
-			wValue & 0xff, wValue >> 8,
-			wIndex & 0xff, wIndex >> 8);
-
-	len = usb_control_msg(fc_usb->udev,pipe,
-			req,
-			request_type,
-			wValue,
-			wIndex,
-			buf,
-			buflen,
-			nWaitTime * HZ);
-	return len == buflen ? 0 : -EREMOTEIO;
-}
-
-/* actual bus specific access functions,
-   make sure prototype are/will be equal to pci */
-static flexcop_ibi_value flexcop_usb_read_ibi_reg(struct flexcop_device *fc,
-	flexcop_ibi_register reg)
-{
-	flexcop_ibi_value val;
-	val.raw = 0;
-	flexcop_usb_readwrite_dw(fc, reg, &val.raw, 1);
-	return val;
-}
-
-static int flexcop_usb_write_ibi_reg(struct flexcop_device *fc,
-		flexcop_ibi_register reg, flexcop_ibi_value val)
-{
-	return flexcop_usb_readwrite_dw(fc, reg, &val.raw, 0);
-}
-
-static int flexcop_usb_i2c_request(struct flexcop_i2c_adapter *i2c,
-		flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len)
-{
-	if (op == FC_READ)
-		return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST,
-				USB_FUNC_I2C_READ, chipaddr, addr, buf, len);
-	else
-		return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST,
-				USB_FUNC_I2C_WRITE, chipaddr, addr, buf, len);
-}
-
-static void flexcop_usb_process_frame(struct flexcop_usb *fc_usb,
-	u8 *buffer, int buffer_length)
-{
-	u8 *b;
-	int l;
-
-	deb_ts("tmp_buffer_length=%d, buffer_length=%d\n",
-		fc_usb->tmp_buffer_length, buffer_length);
-
-	if (fc_usb->tmp_buffer_length > 0) {
-		memcpy(fc_usb->tmp_buffer+fc_usb->tmp_buffer_length, buffer,
-				buffer_length);
-		fc_usb->tmp_buffer_length += buffer_length;
-		b = fc_usb->tmp_buffer;
-		l = fc_usb->tmp_buffer_length;
-	} else {
-		b=buffer;
-		l=buffer_length;
-	}
-
-	while (l >= 190) {
-		if (*b == 0xff) {
-			switch (*(b+1) & 0x03) {
-			case 0x01: /* media packet */
-				if (*(b+2) == 0x47)
-					flexcop_pass_dmx_packets(
-							fc_usb->fc_dev, b+2, 1);
-				else
-					deb_ts(
-					"not ts packet %02x %02x %02x %02x \n",
-						*(b+2), *(b+3),
-						*(b+4), *(b+5));
-				b += 190;
-				l -= 190;
-				break;
-			default:
-				deb_ts("wrong packet type\n");
-				l = 0;
-				break;
-			}
-		} else {
-			deb_ts("wrong header\n");
-			l = 0;
-		}
-	}
-
-	if (l>0)
-		memcpy(fc_usb->tmp_buffer, b, l);
-	fc_usb->tmp_buffer_length = l;
-}
-
-static void flexcop_usb_urb_complete(struct urb *urb)
-{
-	struct flexcop_usb *fc_usb = urb->context;
-	int i;
-
-	if (urb->actual_length > 0)
-		deb_ts("urb completed, bufsize: %d actlen; %d\n",
-			urb->transfer_buffer_length, urb->actual_length);
-
-	for (i = 0; i < urb->number_of_packets; i++) {
-		if (urb->iso_frame_desc[i].status < 0) {
-			err("iso frame descriptor %d has an error: %d\n", i,
-				urb->iso_frame_desc[i].status);
-		} else
-			if (urb->iso_frame_desc[i].actual_length > 0) {
-				deb_ts("passed %d bytes to the demux\n",
-					urb->iso_frame_desc[i].actual_length);
-
-				flexcop_usb_process_frame(fc_usb,
-					urb->transfer_buffer +
-						urb->iso_frame_desc[i].offset,
-					urb->iso_frame_desc[i].actual_length);
-			}
-		urb->iso_frame_desc[i].status = 0;
-		urb->iso_frame_desc[i].actual_length = 0;
-	}
-	usb_submit_urb(urb,GFP_ATOMIC);
-}
-
-static int flexcop_usb_stream_control(struct flexcop_device *fc, int onoff)
-{
-	/* submit/kill iso packets */
-	return 0;
-}
-
-static void flexcop_usb_transfer_exit(struct flexcop_usb *fc_usb)
-{
-	int i;
-	for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
-		if (fc_usb->iso_urb[i] != NULL) {
-			deb_ts("unlinking/killing urb no. %d\n",i);
-			usb_kill_urb(fc_usb->iso_urb[i]);
-			usb_free_urb(fc_usb->iso_urb[i]);
-		}
-
-	if (fc_usb->iso_buffer != NULL)
-		pci_free_consistent(NULL,
-			fc_usb->buffer_size, fc_usb->iso_buffer,
-			fc_usb->dma_addr);
-}
-
-static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
-{
-	u16 frame_size = le16_to_cpu(
-		fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize);
-	int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO *
-		frame_size, i, j, ret;
-	int buffer_offset = 0;
-
-	deb_ts("creating %d iso-urbs with %d frames "
-			"each of %d bytes size = %d.\n", B2C2_USB_NUM_ISO_URB,
-			B2C2_USB_FRAMES_PER_ISO, frame_size, bufsize);
-
-	fc_usb->iso_buffer = pci_alloc_consistent(NULL,
-			bufsize, &fc_usb->dma_addr);
-	if (fc_usb->iso_buffer == NULL)
-		return -ENOMEM;
-
-	memset(fc_usb->iso_buffer, 0, bufsize);
-	fc_usb->buffer_size = bufsize;
-
-	/* creating iso urbs */
-	for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
-		fc_usb->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO,
-			GFP_ATOMIC);
-		if (fc_usb->iso_urb[i] == NULL) {
-			ret = -ENOMEM;
-			goto urb_error;
-		}
-	}
-
-	/* initialising and submitting iso urbs */
-	for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
-		int frame_offset = 0;
-		struct urb *urb = fc_usb->iso_urb[i];
-		deb_ts("initializing and submitting urb no. %d "
-			"(buf_offset: %d).\n", i, buffer_offset);
-
-		urb->dev = fc_usb->udev;
-		urb->context = fc_usb;
-		urb->complete = flexcop_usb_urb_complete;
-		urb->pipe = B2C2_USB_DATA_PIPE;
-		urb->transfer_flags = URB_ISO_ASAP;
-		urb->interval = 1;
-		urb->number_of_packets = B2C2_USB_FRAMES_PER_ISO;
-		urb->transfer_buffer_length = frame_size * B2C2_USB_FRAMES_PER_ISO;
-		urb->transfer_buffer = fc_usb->iso_buffer + buffer_offset;
-
-		buffer_offset += frame_size * B2C2_USB_FRAMES_PER_ISO;
-		for (j = 0; j < B2C2_USB_FRAMES_PER_ISO; j++) {
-			deb_ts("urb no: %d, frame: %d, frame_offset: %d\n",
-					i, j, frame_offset);
-			urb->iso_frame_desc[j].offset = frame_offset;
-			urb->iso_frame_desc[j].length = frame_size;
-			frame_offset += frame_size;
-		}
-
-		if ((ret = usb_submit_urb(fc_usb->iso_urb[i],GFP_ATOMIC))) {
-			err("submitting urb %d failed with %d.", i, ret);
-			goto urb_error;
-		}
-		deb_ts("submitted urb no. %d.\n",i);
-	}
-
-	/* SRAM */
-	flexcop_sram_set_dest(fc_usb->fc_dev, FC_SRAM_DEST_MEDIA |
-			FC_SRAM_DEST_NET | FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI,
-			FC_SRAM_DEST_TARGET_WAN_USB);
-	flexcop_wan_set_speed(fc_usb->fc_dev, FC_WAN_SPEED_8MBITS);
-	flexcop_sram_ctrl(fc_usb->fc_dev, 1, 1, 1);
-	return 0;
-
-urb_error:
-	flexcop_usb_transfer_exit(fc_usb);
-	return ret;
-}
-
-static int flexcop_usb_init(struct flexcop_usb *fc_usb)
-{
-	/* use the alternate setting with the larges buffer */
-	usb_set_interface(fc_usb->udev,0,1);
-	switch (fc_usb->udev->speed) {
-	case USB_SPEED_LOW:
-		err("cannot handle USB speed because it is too slow.");
-		return -ENODEV;
-		break;
-	case USB_SPEED_FULL:
-		info("running at FULL speed.");
-		break;
-	case USB_SPEED_HIGH:
-		info("running at HIGH speed.");
-		break;
-	case USB_SPEED_UNKNOWN: /* fall through */
-	default:
-		err("cannot handle USB speed because it is unknown.");
-		return -ENODEV;
-	}
-	usb_set_intfdata(fc_usb->uintf, fc_usb);
-	return 0;
-}
-
-static void flexcop_usb_exit(struct flexcop_usb *fc_usb)
-{
-	usb_set_intfdata(fc_usb->uintf, NULL);
-}
-
-static int flexcop_usb_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev(intf);
-	struct flexcop_usb *fc_usb = NULL;
-	struct flexcop_device *fc = NULL;
-	int ret;
-
-	if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) {
-		err("out of memory\n");
-		return -ENOMEM;
-	}
-
-	/* general flexcop init */
-	fc_usb = fc->bus_specific;
-	fc_usb->fc_dev = fc;
-
-	fc->read_ibi_reg  = flexcop_usb_read_ibi_reg;
-	fc->write_ibi_reg = flexcop_usb_write_ibi_reg;
-	fc->i2c_request = flexcop_usb_i2c_request;
-	fc->get_mac_addr = flexcop_usb_get_mac_addr;
-
-	fc->stream_control = flexcop_usb_stream_control;
-
-	fc->pid_filtering = 1;
-	fc->bus_type = FC_USB;
-
-	fc->dev = &udev->dev;
-	fc->owner = THIS_MODULE;
-
-	/* bus specific part */
-	fc_usb->udev = udev;
-	fc_usb->uintf = intf;
-	if ((ret = flexcop_usb_init(fc_usb)) != 0)
-		goto err_kfree;
-
-	/* init flexcop */
-	if ((ret = flexcop_device_initialize(fc)) != 0)
-		goto err_usb_exit;
-
-	/* xfer init */
-	if ((ret = flexcop_usb_transfer_init(fc_usb)) != 0)
-		goto err_fc_exit;
-
-	info("%s successfully initialized and connected.", DRIVER_NAME);
-	return 0;
-
-err_fc_exit:
-	flexcop_device_exit(fc);
-err_usb_exit:
-	flexcop_usb_exit(fc_usb);
-err_kfree:
-	flexcop_device_kfree(fc);
-	return ret;
-}
-
-static void flexcop_usb_disconnect(struct usb_interface *intf)
-{
-	struct flexcop_usb *fc_usb = usb_get_intfdata(intf);
-	flexcop_usb_transfer_exit(fc_usb);
-	flexcop_device_exit(fc_usb->fc_dev);
-	flexcop_usb_exit(fc_usb);
-	flexcop_device_kfree(fc_usb->fc_dev);
-	info("%s successfully deinitialized and disconnected.", DRIVER_NAME);
-}
-
-static struct usb_device_id flexcop_usb_table [] = {
-	{ USB_DEVICE(0x0af7, 0x0101) },
-	{ }
-};
-MODULE_DEVICE_TABLE (usb, flexcop_usb_table);
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver flexcop_usb_driver = {
-	.name		= "b2c2_flexcop_usb",
-	.probe		= flexcop_usb_probe,
-	.disconnect = flexcop_usb_disconnect,
-	.id_table	= flexcop_usb_table,
-};
-
-module_usb_driver(flexcop_usb_driver);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_NAME);
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/b2c2/flexcop-usb.h b/drivers/media/dvb/b2c2/flexcop-usb.h
deleted file mode 100644
index 92529a9..0000000
--- a/drivers/media/dvb/b2c2/flexcop-usb.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- * flexcop-usb.h - header file for the USB part
- * see flexcop.c for copyright information
- */
-#ifndef __FLEXCOP_USB_H_INCLUDED__
-#define __FLEXCOP_USB_H_INCLUDED__
-
-#include <linux/usb.h>
-
-/* transfer parameters */
-#define B2C2_USB_FRAMES_PER_ISO 4
-#define B2C2_USB_NUM_ISO_URB 4
-
-#define B2C2_USB_CTRL_PIPE_IN usb_rcvctrlpipe(fc_usb->udev, 0)
-#define B2C2_USB_CTRL_PIPE_OUT usb_sndctrlpipe(fc_usb->udev, 0)
-#define B2C2_USB_DATA_PIPE usb_rcvisocpipe(fc_usb->udev, 0x81)
-
-struct flexcop_usb {
-	struct usb_device *udev;
-	struct usb_interface *uintf;
-
-	u8 *iso_buffer;
-	int buffer_size;
-	dma_addr_t dma_addr;
-
-	struct urb *iso_urb[B2C2_USB_NUM_ISO_URB];
-	struct flexcop_device *fc_dev;
-
-	u8 tmp_buffer[1023+190];
-	int tmp_buffer_length;
-};
-
-#if 0
-/* request types TODO What is its use?*/
-typedef enum {
-
-} flexcop_usb_request_type_t;
-#endif
-
-/* request */
-typedef enum {
-	B2C2_USB_WRITE_V8_MEM = 0x04,
-	B2C2_USB_READ_V8_MEM  = 0x05,
-	B2C2_USB_READ_REG     = 0x08,
-	B2C2_USB_WRITE_REG    = 0x0A,
-	B2C2_USB_WRITEREGHI   = 0x0B,
-	B2C2_USB_FLASH_BLOCK  = 0x10,
-	B2C2_USB_I2C_REQUEST  = 0x11,
-	B2C2_USB_UTILITY      = 0x12,
-} flexcop_usb_request_t;
-
-/* function definition for I2C_REQUEST */
-typedef enum {
-	USB_FUNC_I2C_WRITE       = 0x01,
-	USB_FUNC_I2C_MULTIWRITE  = 0x02,
-	USB_FUNC_I2C_READ        = 0x03,
-	USB_FUNC_I2C_REPEATWRITE = 0x04,
-	USB_FUNC_GET_DESCRIPTOR  = 0x05,
-	USB_FUNC_I2C_REPEATREAD  = 0x06,
-	/* DKT 020208 - add this to support special case of DiSEqC */
-	USB_FUNC_I2C_CHECKWRITE  = 0x07,
-	USB_FUNC_I2C_CHECKRESULT = 0x08,
-} flexcop_usb_i2c_function_t;
-
-/* function definition for UTILITY request 0x12
- * DKT 020304 - new utility function */
-typedef enum {
-	UTILITY_SET_FILTER          = 0x01,
-	UTILITY_DATA_ENABLE         = 0x02,
-	UTILITY_FLEX_MULTIWRITE     = 0x03,
-	UTILITY_SET_BUFFER_SIZE     = 0x04,
-	UTILITY_FLEX_OPERATOR       = 0x05,
-	UTILITY_FLEX_RESET300_START = 0x06,
-	UTILITY_FLEX_RESET300_STOP  = 0x07,
-	UTILITY_FLEX_RESET300       = 0x08,
-	UTILITY_SET_ISO_SIZE        = 0x09,
-	UTILITY_DATA_RESET          = 0x0A,
-	UTILITY_GET_DATA_STATUS     = 0x10,
-	UTILITY_GET_V8_REG          = 0x11,
-	/* DKT 020326 - add function for v1.14 */
-	UTILITY_SRAM_WRITE          = 0x12,
-	UTILITY_SRAM_READ           = 0x13,
-	UTILITY_SRAM_TESTFILL       = 0x14,
-	UTILITY_SRAM_TESTSET        = 0x15,
-	UTILITY_SRAM_TESTVERIFY     = 0x16,
-} flexcop_usb_utility_function_t;
-
-#define B2C2_WAIT_FOR_OPERATION_RW (1*HZ)
-#define B2C2_WAIT_FOR_OPERATION_RDW (3*HZ)
-#define B2C2_WAIT_FOR_OPERATION_WDW (1*HZ)
-
-#define B2C2_WAIT_FOR_OPERATION_V8READ (3*HZ)
-#define B2C2_WAIT_FOR_OPERATION_V8WRITE (3*HZ)
-#define B2C2_WAIT_FOR_OPERATION_V8FLASH (3*HZ)
-
-typedef enum {
-	V8_MEMORY_PAGE_DVB_CI = 0x20,
-	V8_MEMORY_PAGE_DVB_DS = 0x40,
-	V8_MEMORY_PAGE_MULTI2 = 0x60,
-	V8_MEMORY_PAGE_FLASH  = 0x80
-} flexcop_usb_mem_page_t;
-
-#define V8_MEMORY_EXTENDED (1 << 15)
-#define USB_MEM_READ_MAX   32
-#define USB_MEM_WRITE_MAX   1
-#define USB_FLASH_MAX       8
-#define V8_MEMORY_PAGE_SIZE 0x8000 /* 32K */
-#define V8_MEMORY_PAGE_MASK 0x7FFF
-
-#endif
diff --git a/drivers/media/dvb/b2c2/flexcop.c b/drivers/media/dvb/b2c2/flexcop.c
deleted file mode 100644
index b1e8c99..0000000
--- a/drivers/media/dvb/b2c2/flexcop.c
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- * flexcop.c - main module part
- * Copyright (C) 2004-9 Patrick Boettcher <patrick.boettcher@desy.de>
- * based on skystar2-driver Copyright (C) 2003 Vadim Catana, skystar@moldova.cc
- *
- * Acknowledgements:
- *   John Jurrius from BBTI, Inc. for extensive support
- *                    with code examples and data books
- *   Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting)
- *
- * Contributions to the skystar2-driver have been done by
- *   Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes)
- *   Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code)
- *   Uwe Bugla, uwe.bugla at gmx.de (doing tests, restyling code, writing docu)
- *   Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac
- *               filtering)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#include "flexcop.h"
-
-#define DRIVER_NAME "B2C2 FlexcopII/II(b)/III digital TV receiver chip"
-#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de"
-
-#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
-#define DEBSTATUS ""
-#else
-#define DEBSTATUS " (debugging is not enabled)"
-#endif
-
-int b2c2_flexcop_debug;
-module_param_named(debug, b2c2_flexcop_debug,  int, 0644);
-MODULE_PARM_DESC(debug,
-		"set debug level (1=info,2=tuner,4=i2c,8=ts,"
-		"16=sram,32=reg (|-able))."
-		DEBSTATUS);
-#undef DEBSTATUS
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-/* global zero for ibi values */
-flexcop_ibi_value ibi_zero;
-
-static int flexcop_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct flexcop_device *fc = dvbdmxfeed->demux->priv;
-	return flexcop_pid_feed_control(fc, dvbdmxfeed, 1);
-}
-
-static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct flexcop_device *fc = dvbdmxfeed->demux->priv;
-	return flexcop_pid_feed_control(fc, dvbdmxfeed, 0);
-}
-
-static int flexcop_dvb_init(struct flexcop_device *fc)
-{
-	int ret = dvb_register_adapter(&fc->dvb_adapter,
-			"FlexCop Digital TV device", fc->owner,
-			fc->dev, adapter_nr);
-	if (ret < 0) {
-		err("error registering DVB adapter");
-		return ret;
-	}
-	fc->dvb_adapter.priv = fc;
-
-	fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING
-			| DMX_MEMORY_BASED_FILTERING);
-	fc->demux.priv = fc;
-	fc->demux.filternum = fc->demux.feednum = FC_MAX_FEED;
-	fc->demux.start_feed = flexcop_dvb_start_feed;
-	fc->demux.stop_feed = flexcop_dvb_stop_feed;
-	fc->demux.write_to_decoder = NULL;
-
-	ret = dvb_dmx_init(&fc->demux);
-	if (ret < 0) {
-		err("dvb_dmx failed: error %d", ret);
-		goto err_dmx;
-	}
-
-	fc->hw_frontend.source = DMX_FRONTEND_0;
-
-	fc->dmxdev.filternum = fc->demux.feednum;
-	fc->dmxdev.demux = &fc->demux.dmx;
-	fc->dmxdev.capabilities = 0;
-	ret = dvb_dmxdev_init(&fc->dmxdev, &fc->dvb_adapter);
-	if (ret < 0) {
-		err("dvb_dmxdev_init failed: error %d", ret);
-		goto err_dmx_dev;
-	}
-
-	ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->hw_frontend);
-	if (ret < 0) {
-		err("adding hw_frontend to dmx failed: error %d", ret);
-		goto err_dmx_add_hw_frontend;
-	}
-
-	fc->mem_frontend.source = DMX_MEMORY_FE;
-	ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->mem_frontend);
-	if (ret < 0) {
-		err("adding mem_frontend to dmx failed: error %d", ret);
-		goto err_dmx_add_mem_frontend;
-	}
-
-	ret = fc->demux.dmx.connect_frontend(&fc->demux.dmx, &fc->hw_frontend);
-	if (ret < 0) {
-		err("connect frontend failed: error %d", ret);
-		goto err_connect_frontend;
-	}
-
-	ret = dvb_net_init(&fc->dvb_adapter, &fc->dvbnet, &fc->demux.dmx);
-	if (ret < 0) {
-		err("dvb_net_init failed: error %d", ret);
-		goto err_net;
-	}
-
-	fc->init_state |= FC_STATE_DVB_INIT;
-	return 0;
-
-err_net:
-	fc->demux.dmx.disconnect_frontend(&fc->demux.dmx);
-err_connect_frontend:
-	fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->mem_frontend);
-err_dmx_add_mem_frontend:
-	fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->hw_frontend);
-err_dmx_add_hw_frontend:
-	dvb_dmxdev_release(&fc->dmxdev);
-err_dmx_dev:
-	dvb_dmx_release(&fc->demux);
-err_dmx:
-	dvb_unregister_adapter(&fc->dvb_adapter);
-	return ret;
-}
-
-static void flexcop_dvb_exit(struct flexcop_device *fc)
-{
-	if (fc->init_state & FC_STATE_DVB_INIT) {
-		dvb_net_release(&fc->dvbnet);
-
-		fc->demux.dmx.close(&fc->demux.dmx);
-		fc->demux.dmx.remove_frontend(&fc->demux.dmx,
-			&fc->mem_frontend);
-		fc->demux.dmx.remove_frontend(&fc->demux.dmx,
-			&fc->hw_frontend);
-		dvb_dmxdev_release(&fc->dmxdev);
-		dvb_dmx_release(&fc->demux);
-		dvb_unregister_adapter(&fc->dvb_adapter);
-		deb_info("deinitialized dvb stuff\n");
-	}
-	fc->init_state &= ~FC_STATE_DVB_INIT;
-}
-
-/* these methods are necessary to achieve the long-term-goal of hiding the
- * struct flexcop_device from the bus-parts */
-void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len)
-{
-	dvb_dmx_swfilter(&fc->demux, buf, len);
-}
-EXPORT_SYMBOL(flexcop_pass_dmx_data);
-
-void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no)
-{
-	dvb_dmx_swfilter_packets(&fc->demux, buf, no);
-}
-EXPORT_SYMBOL(flexcop_pass_dmx_packets);
-
-static void flexcop_reset(struct flexcop_device *fc)
-{
-	flexcop_ibi_value v210, v204;
-
-	/* reset the flexcop itself */
-	fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
-
-	v210.raw = 0;
-	v210.sw_reset_210.reset_block_000 = 1;
-	v210.sw_reset_210.reset_block_100 = 1;
-	v210.sw_reset_210.reset_block_200 = 1;
-	v210.sw_reset_210.reset_block_300 = 1;
-	v210.sw_reset_210.reset_block_400 = 1;
-	v210.sw_reset_210.reset_block_500 = 1;
-	v210.sw_reset_210.reset_block_600 = 1;
-	v210.sw_reset_210.reset_block_700 = 1;
-	v210.sw_reset_210.Block_reset_enable = 0xb2;
-	v210.sw_reset_210.Special_controls = 0xc259;
-	fc->write_ibi_reg(fc,sw_reset_210,v210);
-	msleep(1);
-
-	/* reset the periphical devices */
-
-	v204 = fc->read_ibi_reg(fc,misc_204);
-	v204.misc_204.Per_reset_sig = 0;
-	fc->write_ibi_reg(fc,misc_204,v204);
-	msleep(1);
-	v204.misc_204.Per_reset_sig = 1;
-	fc->write_ibi_reg(fc,misc_204,v204);
-}
-
-void flexcop_reset_block_300(struct flexcop_device *fc)
-{
-	flexcop_ibi_value v208_save = fc->read_ibi_reg(fc, ctrl_208),
-			  v210 = fc->read_ibi_reg(fc, sw_reset_210);
-
-	deb_rdump("208: %08x, 210: %08x\n", v208_save.raw, v210.raw);
-	fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
-
-	v210.sw_reset_210.reset_block_300 = 1;
-	v210.sw_reset_210.Block_reset_enable = 0xb2;
-
-	fc->write_ibi_reg(fc,sw_reset_210,v210);
-	fc->write_ibi_reg(fc,ctrl_208,v208_save);
-}
-
-struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len)
-{
-	void *bus;
-	struct flexcop_device *fc = kzalloc(sizeof(struct flexcop_device),
-				GFP_KERNEL);
-	if (!fc) {
-		err("no memory");
-		return NULL;
-	}
-
-	bus = kzalloc(bus_specific_len, GFP_KERNEL);
-	if (!bus) {
-		err("no memory");
-		kfree(fc);
-		return NULL;
-	}
-
-	fc->bus_specific = bus;
-
-	return fc;
-}
-EXPORT_SYMBOL(flexcop_device_kmalloc);
-
-void flexcop_device_kfree(struct flexcop_device *fc)
-{
-	kfree(fc->bus_specific);
-	kfree(fc);
-}
-EXPORT_SYMBOL(flexcop_device_kfree);
-
-int flexcop_device_initialize(struct flexcop_device *fc)
-{
-	int ret;
-	ibi_zero.raw = 0;
-
-	flexcop_reset(fc);
-	flexcop_determine_revision(fc);
-	flexcop_sram_init(fc);
-	flexcop_hw_filter_init(fc);
-	flexcop_smc_ctrl(fc, 0);
-
-	ret = flexcop_dvb_init(fc);
-	if (ret)
-		goto error;
-
-	/* i2c has to be done before doing EEProm stuff -
-	 * because the EEProm is accessed via i2c */
-	ret = flexcop_i2c_init(fc);
-	if (ret)
-		goto error;
-
-	/* do the MAC address reading after initializing the dvb_adapter */
-	if (fc->get_mac_addr(fc, 0) == 0) {
-		u8 *b = fc->dvb_adapter.proposed_mac;
-		info("MAC address = %pM", b);
-		flexcop_set_mac_filter(fc,b);
-		flexcop_mac_filter_ctrl(fc,1);
-	} else
-		warn("reading of MAC address failed.\n");
-
-	ret = flexcop_frontend_init(fc);
-	if (ret)
-		goto error;
-
-	flexcop_device_name(fc,"initialization of","complete");
-	return 0;
-
-error:
-	flexcop_device_exit(fc);
-	return ret;
-}
-EXPORT_SYMBOL(flexcop_device_initialize);
-
-void flexcop_device_exit(struct flexcop_device *fc)
-{
-	flexcop_frontend_exit(fc);
-	flexcop_i2c_exit(fc);
-	flexcop_dvb_exit(fc);
-}
-EXPORT_SYMBOL(flexcop_device_exit);
-
-static int flexcop_module_init(void)
-{
-	info(DRIVER_NAME " loaded successfully");
-	return 0;
-}
-
-static void flexcop_module_cleanup(void)
-{
-	info(DRIVER_NAME " unloaded successfully");
-}
-
-module_init(flexcop_module_init);
-module_exit(flexcop_module_cleanup);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_NAME);
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/b2c2/flexcop.h b/drivers/media/dvb/b2c2/flexcop.h
deleted file mode 100644
index 897b10c..0000000
--- a/drivers/media/dvb/b2c2/flexcop.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- * flexcop.h - private header file for all flexcop-chip-source files
- * see flexcop.c for copyright information
- */
-#ifndef __FLEXCOP_H__
-#define __FLEXCOP_H___
-
-#define FC_LOG_PREFIX "b2c2-flexcop"
-#include "flexcop-common.h"
-
-extern int b2c2_flexcop_debug;
-
-/* debug */
-#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
-#define dprintk(level,args...) \
-	do { if ((b2c2_flexcop_debug & level)) printk(args); } while (0)
-#else
-#define dprintk(level,args...)
-#endif
-
-#define deb_info(args...) dprintk(0x01, args)
-#define deb_tuner(args...) dprintk(0x02, args)
-#define deb_i2c(args...) dprintk(0x04, args)
-#define deb_ts(args...) dprintk(0x08, args)
-#define deb_sram(args...) dprintk(0x10, args)
-#define deb_rdump(args...) dprintk(0x20, args)
-
-#endif
diff --git a/drivers/media/dvb/b2c2/flexcop_ibi_value_be.h b/drivers/media/dvb/b2c2/flexcop_ibi_value_be.h
deleted file mode 100644
index 8f64bdb..0000000
--- a/drivers/media/dvb/b2c2/flexcop_ibi_value_be.h
+++ /dev/null
@@ -1,455 +0,0 @@
-/* Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- * register descriptions
- * see flexcop.c for copyright information
- */
-/* This file is automatically generated, do not edit things here. */
-#ifndef __FLEXCOP_IBI_VALUE_INCLUDED__
-#define __FLEXCOP_IBI_VALUE_INCLUDED__
-
-typedef union {
-	u32 raw;
-
-	struct {
-		u32 dma_address0                   :30;
-		u32 dma_0No_update                 : 1;
-		u32 dma_0start                     : 1;
-	} dma_0x0;
-
-	struct {
-		u32 dma_addr_size                  :24;
-		u32 DMA_maxpackets                 : 8;
-	} dma_0x4_remap;
-
-	struct {
-		u32 dma_addr_size                  :24;
-		u32 unused                         : 1;
-		u32 dma1timer                      : 7;
-	} dma_0x4_read;
-
-	struct {
-		u32 dma_addr_size                  :24;
-		u32 dmatimer                       : 7;
-		u32 unused                         : 1;
-	} dma_0x4_write;
-
-	struct {
-		u32 dma_cur_addr                   :30;
-		u32 unused                         : 2;
-	} dma_0x8;
-
-	struct {
-		u32 dma_address1                   :30;
-		u32 remap_enable                   : 1;
-		u32 dma_1start                     : 1;
-	} dma_0xc;
-
-	struct {
-		u32 st_done                        : 1;
-		u32 no_base_addr_ack_error         : 1;
-		u32 twoWS_port_reg                 : 2;
-		u32 total_bytes                    : 2;
-		u32 twoWS_rw                       : 1;
-		u32 working_start                  : 1;
-		u32 data1_reg                      : 8;
-		u32 baseaddr                       : 8;
-		u32 reserved1                      : 1;
-		u32 chipaddr                       : 7;
-	} tw_sm_c_100;
-
-	struct {
-		u32 unused                         : 6;
-		u32 force_stop                     : 1;
-		u32 exlicit_stops                  : 1;
-		u32 data4_reg                      : 8;
-		u32 data3_reg                      : 8;
-		u32 data2_reg                      : 8;
-	} tw_sm_c_104;
-
-	struct {
-		u32 reserved2                      :19;
-		u32 tlo1                           : 5;
-		u32 reserved1                      : 2;
-		u32 thi1                           : 6;
-	} tw_sm_c_108;
-
-	struct {
-		u32 reserved2                      :19;
-		u32 tlo1                           : 5;
-		u32 reserved1                      : 2;
-		u32 thi1                           : 6;
-	} tw_sm_c_10c;
-
-	struct {
-		u32 reserved2                      :19;
-		u32 tlo1                           : 5;
-		u32 reserved1                      : 2;
-		u32 thi1                           : 6;
-	} tw_sm_c_110;
-
-	struct {
-		u32 LNB_CTLPrescaler_sig           : 2;
-		u32 LNB_CTLLowCount_sig            :15;
-		u32 LNB_CTLHighCount_sig           :15;
-	} lnb_switch_freq_200;
-
-	struct {
-		u32 Rev_N_sig_reserved2            : 1;
-		u32 Rev_N_sig_caps                 : 1;
-		u32 Rev_N_sig_reserved1            : 2;
-		u32 Rev_N_sig_revision_hi          : 4;
-		u32 reserved                       :20;
-		u32 Per_reset_sig                  : 1;
-		u32 LNB_L_H_sig                    : 1;
-		u32 ACPI3_sig                      : 1;
-		u32 ACPI1_sig                      : 1;
-	} misc_204;
-
-	struct {
-		u32 unused                         : 9;
-		u32 Mailbox_from_V8_Enable_sig     : 1;
-		u32 DMA2_Size_IRQ_Enable_sig       : 1;
-		u32 DMA1_Size_IRQ_Enable_sig       : 1;
-		u32 DMA2_Timer_Enable_sig          : 1;
-		u32 DMA2_IRQ_Enable_sig            : 1;
-		u32 DMA1_Timer_Enable_sig          : 1;
-		u32 DMA1_IRQ_Enable_sig            : 1;
-		u32 Rcv_Data_sig                   : 1;
-		u32 MAC_filter_Mode_sig            : 1;
-		u32 Multi2_Enable_sig              : 1;
-		u32 Per_CA_Enable_sig              : 1;
-		u32 SMC_Enable_sig                 : 1;
-		u32 CA_Enable_sig                  : 1;
-		u32 WAN_CA_Enable_sig              : 1;
-		u32 WAN_Enable_sig                 : 1;
-		u32 Mask_filter_sig                : 1;
-		u32 Null_filter_sig                : 1;
-		u32 ECM_filter_sig                 : 1;
-		u32 EMM_filter_sig                 : 1;
-		u32 PMT_filter_sig                 : 1;
-		u32 PCR_filter_sig                 : 1;
-		u32 Stream2_filter_sig             : 1;
-		u32 Stream1_filter_sig             : 1;
-	} ctrl_208;
-
-	struct {
-		u32 reserved                       :21;
-		u32 Transport_Error                : 1;
-		u32 LLC_SNAP_FLAG_set              : 1;
-		u32 Continuity_error_flag          : 1;
-		u32 Data_receiver_error            : 1;
-		u32 Mailbox_from_V8_Status_sig     : 1;
-		u32 DMA2_Size_IRQ_Status           : 1;
-		u32 DMA1_Size_IRQ_Status           : 1;
-		u32 DMA2_Timer_Status              : 1;
-		u32 DMA2_IRQ_Status                : 1;
-		u32 DMA1_Timer_Status              : 1;
-		u32 DMA1_IRQ_Status                : 1;
-	} irq_20c;
-
-	struct {
-		u32 Special_controls               :16;
-		u32 Block_reset_enable             : 8;
-		u32 reset_block_700                : 1;
-		u32 reset_block_600                : 1;
-		u32 reset_block_500                : 1;
-		u32 reset_block_400                : 1;
-		u32 reset_block_300                : 1;
-		u32 reset_block_200                : 1;
-		u32 reset_block_100                : 1;
-		u32 reset_block_000                : 1;
-	} sw_reset_210;
-
-	struct {
-		u32 unused2                        :20;
-		u32 polarity_PS_ERR_sig            : 1;
-		u32 polarity_PS_SYNC_sig           : 1;
-		u32 polarity_PS_VALID_sig          : 1;
-		u32 polarity_PS_CLK_sig            : 1;
-		u32 unused1                        : 3;
-		u32 s2p_sel_sig                    : 1;
-		u32 section_pkg_enable_sig         : 1;
-		u32 halt_V8_sig                    : 1;
-		u32 v2WS_oe_sig                    : 1;
-		u32 vuart_oe_sig                   : 1;
-	} misc_214;
-
-	struct {
-		u32 Mailbox_from_V8                :32;
-	} mbox_v8_to_host_218;
-
-	struct {
-		u32 sysramaccess_busmuster         : 1;
-		u32 sysramaccess_write             : 1;
-		u32 unused                         : 7;
-		u32 sysramaccess_addr              :15;
-		u32 sysramaccess_data              : 8;
-	} mbox_host_to_v8_21c;
-
-	struct {
-		u32 debug_fifo_problem             : 1;
-		u32 debug_flag_write_status00      : 1;
-		u32 Stream2_trans                  : 1;
-		u32 Stream2_PID                    :13;
-		u32 debug_flag_pid_saved           : 1;
-		u32 MAC_Multicast_filter           : 1;
-		u32 Stream1_trans                  : 1;
-		u32 Stream1_PID                    :13;
-	} pid_filter_300;
-
-	struct {
-		u32 reserved                       : 2;
-		u32 PMT_trans                      : 1;
-		u32 PMT_PID                        :13;
-		u32 debug_overrun2                 : 1;
-		u32 debug_overrun3                 : 1;
-		u32 PCR_trans                      : 1;
-		u32 PCR_PID                        :13;
-	} pid_filter_304;
-
-	struct {
-		u32 reserved                       : 2;
-		u32 ECM_trans                      : 1;
-		u32 ECM_PID                        :13;
-		u32 EMM_filter_6                   : 1;
-		u32 EMM_filter_4                   : 1;
-		u32 EMM_trans                      : 1;
-		u32 EMM_PID                        :13;
-	} pid_filter_308;
-
-	struct {
-		u32 unused2                        : 3;
-		u32 Group_mask                     :13;
-		u32 unused1                        : 2;
-		u32 Group_trans                    : 1;
-		u32 Group_PID                      :13;
-	} pid_filter_30c_ext_ind_0_7;
-
-	struct {
-		u32 unused                         :15;
-		u32 net_master_read                :17;
-	} pid_filter_30c_ext_ind_1;
-
-	struct {
-		u32 unused                         :15;
-		u32 net_master_write               :17;
-	} pid_filter_30c_ext_ind_2;
-
-	struct {
-		u32 unused                         :15;
-		u32 next_net_master_write          :17;
-	} pid_filter_30c_ext_ind_3;
-
-	struct {
-		u32 reserved2                      : 5;
-		u32 stack_read                     :10;
-		u32 reserved1                      : 6;
-		u32 state_write                    :10;
-		u32 unused1                        : 1;
-	} pid_filter_30c_ext_ind_4;
-
-	struct {
-		u32 unused                         :22;
-		u32 stack_cnt                      :10;
-	} pid_filter_30c_ext_ind_5;
-
-	struct {
-		u32 unused                         : 4;
-		u32 data_size_reg                  :12;
-		u32 write_status4                  : 2;
-		u32 write_status1                  : 2;
-		u32 pid_fsm_save_reg300            : 2;
-		u32 pid_fsm_save_reg4              : 2;
-		u32 pid_fsm_save_reg3              : 2;
-		u32 pid_fsm_save_reg2              : 2;
-		u32 pid_fsm_save_reg1              : 2;
-		u32 pid_fsm_save_reg0              : 2;
-	} pid_filter_30c_ext_ind_6;
-
-	struct {
-		u32 unused                         :22;
-		u32 pass_alltables                 : 1;
-		u32 AB_select                      : 1;
-		u32 extra_index_reg                : 3;
-		u32 index_reg                      : 5;
-	} index_reg_310;
-
-	struct {
-		u32 reserved                       :17;
-		u32 PID_enable_bit                 : 1;
-		u32 PID_trans                      : 1;
-		u32 PID                            :13;
-	} pid_n_reg_314;
-
-	struct {
-		u32 reserved                       : 6;
-		u32 HighAB_bit                     : 1;
-		u32 Enable_bit                     : 1;
-		u32 A6_byte                        : 8;
-		u32 A5_byte                        : 8;
-		u32 A4_byte                        : 8;
-	} mac_low_reg_318;
-
-	struct {
-		u32 reserved                       : 8;
-		u32 A3_byte                        : 8;
-		u32 A2_byte                        : 8;
-		u32 A1_byte                        : 8;
-	} mac_high_reg_31c;
-
-	struct {
-		u32 data_Tag_ID                    :16;
-		u32 reserved                       :16;
-	} data_tag_400;
-
-	struct {
-		u32 Card_IDbyte3                   : 8;
-		u32 Card_IDbyte4                   : 8;
-		u32 Card_IDbyte5                   : 8;
-		u32 Card_IDbyte6                   : 8;
-	} card_id_408;
-
-	struct {
-		u32 Card_IDbyte1                   : 8;
-		u32 Card_IDbyte2                   : 8;
-	} card_id_40c;
-
-	struct {
-		u32 MAC6                           : 8;
-		u32 MAC3                           : 8;
-		u32 MAC2                           : 8;
-		u32 MAC1                           : 8;
-	} mac_address_418;
-
-	struct {
-		u32 reserved                       :16;
-		u32 MAC8                           : 8;
-		u32 MAC7                           : 8;
-	} mac_address_41c;
-
-	struct {
-		u32 reserved                       :21;
-		u32 txbuffempty                    : 1;
-		u32 ReceiveByteFrameError          : 1;
-		u32 ReceiveDataReady               : 1;
-		u32 transmitter_data_byte          : 8;
-	} ci_600;
-
-	struct {
-		u32 pi_component_reg               : 3;
-		u32 pi_rw                          : 1;
-		u32 pi_ha                          :20;
-		u32 pi_d                           : 8;
-	} pi_604;
-
-	struct {
-		u32 pi_busy_n                      : 1;
-		u32 pi_wait_n                      : 1;
-		u32 pi_timeout_status              : 1;
-		u32 pi_CiMax_IRQ_n                 : 1;
-		u32 config_cclk                    : 1;
-		u32 config_cs_n                    : 1;
-		u32 config_wr_n                    : 1;
-		u32 config_Prog_n                  : 1;
-		u32 config_Init_stat               : 1;
-		u32 config_Done_stat               : 1;
-		u32 pcmcia_b_mod_pwr_n             : 1;
-		u32 pcmcia_a_mod_pwr_n             : 1;
-		u32 reserved                       : 3;
-		u32 Timer_addr                     : 5;
-		u32 unused                         : 1;
-		u32 timer_data                     : 7;
-		u32 Timer_Load_req                 : 1;
-		u32 Timer_Read_req                 : 1;
-		u32 oncecycle_read                 : 1;
-		u32 serialReset                    : 1;
-	} pi_608;
-
-	struct {
-		u32 reserved                       : 6;
-		u32 rw_flag                        : 1;
-		u32 dvb_en                         : 1;
-		u32 key_array_row                  : 5;
-		u32 key_array_col                  : 3;
-		u32 key_code                       : 2;
-		u32 key_enable                     : 1;
-		u32 PID                            :13;
-	} dvb_reg_60c;
-
-	struct {
-		u32 start_sram_ibi                 : 1;
-		u32 reserved2                      : 1;
-		u32 ce_pin_reg                     : 1;
-		u32 oe_pin_reg                     : 1;
-		u32 reserved1                      : 3;
-		u32 sc_xfer_bit                    : 1;
-		u32 sram_data                      : 8;
-		u32 sram_rw                        : 1;
-		u32 sram_addr                      :15;
-	} sram_ctrl_reg_700;
-
-	struct {
-		u32 net_addr_write                 :16;
-		u32 net_addr_read                  :16;
-	} net_buf_reg_704;
-
-	struct {
-		u32 cai_cnt                        : 4;
-		u32 reserved2                      : 6;
-		u32 cai_write                      :11;
-		u32 reserved1                      : 5;
-		u32 cai_read                       :11;
-	} cai_buf_reg_708;
-
-	struct {
-		u32 cao_cnt                        : 4;
-		u32 reserved2                      : 6;
-		u32 cap_write                      :11;
-		u32 reserved1                      : 5;
-		u32 cao_read                       :11;
-	} cao_buf_reg_70c;
-
-	struct {
-		u32 media_cnt                      : 4;
-		u32 reserved2                      : 6;
-		u32 media_write                    :11;
-		u32 reserved1                      : 5;
-		u32 media_read                     :11;
-	} media_buf_reg_710;
-
-	struct {
-		u32 reserved                       :17;
-		u32 ctrl_maximumfill               : 1;
-		u32 ctrl_sramdma                   : 1;
-		u32 ctrl_usb_wan                   : 1;
-		u32 cao_ovflow_error               : 1;
-		u32 cai_ovflow_error               : 1;
-		u32 media_ovflow_error             : 1;
-		u32 net_ovflow_error               : 1;
-		u32 MEDIA_Dest                     : 2;
-		u32 CAO_Dest                       : 2;
-		u32 CAI_Dest                       : 2;
-		u32 NET_Dest                       : 2;
-	} sram_dest_reg_714;
-
-	struct {
-		u32 reserved3                      :11;
-		u32 net_addr_write                 : 1;
-		u32 reserved2                      : 3;
-		u32 net_addr_read                  : 1;
-		u32 reserved1                      : 4;
-		u32 net_cnt                        :12;
-	} net_buf_reg_718;
-
-	struct {
-		u32 reserved3                      : 4;
-		u32 wan_pkt_frame                  : 4;
-		u32 reserved2                      : 4;
-		u32 sram_memmap                    : 2;
-		u32 sram_chip                      : 2;
-		u32 wan_wait_state                 : 8;
-		u32 reserved1                      : 6;
-		u32 wan_speed_sig                  : 2;
-	} wan_ctrl_reg_71c;
-} flexcop_ibi_value;
-
-#endif
diff --git a/drivers/media/dvb/b2c2/flexcop_ibi_value_le.h b/drivers/media/dvb/b2c2/flexcop_ibi_value_le.h
deleted file mode 100644
index c75830d..0000000
--- a/drivers/media/dvb/b2c2/flexcop_ibi_value_le.h
+++ /dev/null
@@ -1,455 +0,0 @@
-/* Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- * register descriptions
- * see flexcop.c for copyright information
- */
-/* This file is automatically generated, do not edit things here. */
-#ifndef __FLEXCOP_IBI_VALUE_INCLUDED__
-#define __FLEXCOP_IBI_VALUE_INCLUDED__
-
-typedef union {
-	u32 raw;
-
-	struct {
-		u32 dma_0start                     : 1;
-		u32 dma_0No_update                 : 1;
-		u32 dma_address0                   :30;
-	} dma_0x0;
-
-	struct {
-		u32 DMA_maxpackets                 : 8;
-		u32 dma_addr_size                  :24;
-	} dma_0x4_remap;
-
-	struct {
-		u32 dma1timer                      : 7;
-		u32 unused                         : 1;
-		u32 dma_addr_size                  :24;
-	} dma_0x4_read;
-
-	struct {
-		u32 unused                         : 1;
-		u32 dmatimer                       : 7;
-		u32 dma_addr_size                  :24;
-	} dma_0x4_write;
-
-	struct {
-		u32 unused                         : 2;
-		u32 dma_cur_addr                   :30;
-	} dma_0x8;
-
-	struct {
-		u32 dma_1start                     : 1;
-		u32 remap_enable                   : 1;
-		u32 dma_address1                   :30;
-	} dma_0xc;
-
-	struct {
-		u32 chipaddr                       : 7;
-		u32 reserved1                      : 1;
-		u32 baseaddr                       : 8;
-		u32 data1_reg                      : 8;
-		u32 working_start                  : 1;
-		u32 twoWS_rw                       : 1;
-		u32 total_bytes                    : 2;
-		u32 twoWS_port_reg                 : 2;
-		u32 no_base_addr_ack_error         : 1;
-		u32 st_done                        : 1;
-	} tw_sm_c_100;
-
-	struct {
-		u32 data2_reg                      : 8;
-		u32 data3_reg                      : 8;
-		u32 data4_reg                      : 8;
-		u32 exlicit_stops                  : 1;
-		u32 force_stop                     : 1;
-		u32 unused                         : 6;
-	} tw_sm_c_104;
-
-	struct {
-		u32 thi1                           : 6;
-		u32 reserved1                      : 2;
-		u32 tlo1                           : 5;
-		u32 reserved2                      :19;
-	} tw_sm_c_108;
-
-	struct {
-		u32 thi1                           : 6;
-		u32 reserved1                      : 2;
-		u32 tlo1                           : 5;
-		u32 reserved2                      :19;
-	} tw_sm_c_10c;
-
-	struct {
-		u32 thi1                           : 6;
-		u32 reserved1                      : 2;
-		u32 tlo1                           : 5;
-		u32 reserved2                      :19;
-	} tw_sm_c_110;
-
-	struct {
-		u32 LNB_CTLHighCount_sig           :15;
-		u32 LNB_CTLLowCount_sig            :15;
-		u32 LNB_CTLPrescaler_sig           : 2;
-	} lnb_switch_freq_200;
-
-	struct {
-		u32 ACPI1_sig                      : 1;
-		u32 ACPI3_sig                      : 1;
-		u32 LNB_L_H_sig                    : 1;
-		u32 Per_reset_sig                  : 1;
-		u32 reserved                       :20;
-		u32 Rev_N_sig_revision_hi          : 4;
-		u32 Rev_N_sig_reserved1            : 2;
-		u32 Rev_N_sig_caps                 : 1;
-		u32 Rev_N_sig_reserved2            : 1;
-	} misc_204;
-
-	struct {
-		u32 Stream1_filter_sig             : 1;
-		u32 Stream2_filter_sig             : 1;
-		u32 PCR_filter_sig                 : 1;
-		u32 PMT_filter_sig                 : 1;
-		u32 EMM_filter_sig                 : 1;
-		u32 ECM_filter_sig                 : 1;
-		u32 Null_filter_sig                : 1;
-		u32 Mask_filter_sig                : 1;
-		u32 WAN_Enable_sig                 : 1;
-		u32 WAN_CA_Enable_sig              : 1;
-		u32 CA_Enable_sig                  : 1;
-		u32 SMC_Enable_sig                 : 1;
-		u32 Per_CA_Enable_sig              : 1;
-		u32 Multi2_Enable_sig              : 1;
-		u32 MAC_filter_Mode_sig            : 1;
-		u32 Rcv_Data_sig                   : 1;
-		u32 DMA1_IRQ_Enable_sig            : 1;
-		u32 DMA1_Timer_Enable_sig          : 1;
-		u32 DMA2_IRQ_Enable_sig            : 1;
-		u32 DMA2_Timer_Enable_sig          : 1;
-		u32 DMA1_Size_IRQ_Enable_sig       : 1;
-		u32 DMA2_Size_IRQ_Enable_sig       : 1;
-		u32 Mailbox_from_V8_Enable_sig     : 1;
-		u32 unused                         : 9;
-	} ctrl_208;
-
-	struct {
-		u32 DMA1_IRQ_Status                : 1;
-		u32 DMA1_Timer_Status              : 1;
-		u32 DMA2_IRQ_Status                : 1;
-		u32 DMA2_Timer_Status              : 1;
-		u32 DMA1_Size_IRQ_Status           : 1;
-		u32 DMA2_Size_IRQ_Status           : 1;
-		u32 Mailbox_from_V8_Status_sig     : 1;
-		u32 Data_receiver_error            : 1;
-		u32 Continuity_error_flag          : 1;
-		u32 LLC_SNAP_FLAG_set              : 1;
-		u32 Transport_Error                : 1;
-		u32 reserved                       :21;
-	} irq_20c;
-
-	struct {
-		u32 reset_block_000                : 1;
-		u32 reset_block_100                : 1;
-		u32 reset_block_200                : 1;
-		u32 reset_block_300                : 1;
-		u32 reset_block_400                : 1;
-		u32 reset_block_500                : 1;
-		u32 reset_block_600                : 1;
-		u32 reset_block_700                : 1;
-		u32 Block_reset_enable             : 8;
-		u32 Special_controls               :16;
-	} sw_reset_210;
-
-	struct {
-		u32 vuart_oe_sig                   : 1;
-		u32 v2WS_oe_sig                    : 1;
-		u32 halt_V8_sig                    : 1;
-		u32 section_pkg_enable_sig         : 1;
-		u32 s2p_sel_sig                    : 1;
-		u32 unused1                        : 3;
-		u32 polarity_PS_CLK_sig            : 1;
-		u32 polarity_PS_VALID_sig          : 1;
-		u32 polarity_PS_SYNC_sig           : 1;
-		u32 polarity_PS_ERR_sig            : 1;
-		u32 unused2                        :20;
-	} misc_214;
-
-	struct {
-		u32 Mailbox_from_V8                :32;
-	} mbox_v8_to_host_218;
-
-	struct {
-		u32 sysramaccess_data              : 8;
-		u32 sysramaccess_addr              :15;
-		u32 unused                         : 7;
-		u32 sysramaccess_write             : 1;
-		u32 sysramaccess_busmuster         : 1;
-	} mbox_host_to_v8_21c;
-
-	struct {
-		u32 Stream1_PID                    :13;
-		u32 Stream1_trans                  : 1;
-		u32 MAC_Multicast_filter           : 1;
-		u32 debug_flag_pid_saved           : 1;
-		u32 Stream2_PID                    :13;
-		u32 Stream2_trans                  : 1;
-		u32 debug_flag_write_status00      : 1;
-		u32 debug_fifo_problem             : 1;
-	} pid_filter_300;
-
-	struct {
-		u32 PCR_PID                        :13;
-		u32 PCR_trans                      : 1;
-		u32 debug_overrun3                 : 1;
-		u32 debug_overrun2                 : 1;
-		u32 PMT_PID                        :13;
-		u32 PMT_trans                      : 1;
-		u32 reserved                       : 2;
-	} pid_filter_304;
-
-	struct {
-		u32 EMM_PID                        :13;
-		u32 EMM_trans                      : 1;
-		u32 EMM_filter_4                   : 1;
-		u32 EMM_filter_6                   : 1;
-		u32 ECM_PID                        :13;
-		u32 ECM_trans                      : 1;
-		u32 reserved                       : 2;
-	} pid_filter_308;
-
-	struct {
-		u32 Group_PID                      :13;
-		u32 Group_trans                    : 1;
-		u32 unused1                        : 2;
-		u32 Group_mask                     :13;
-		u32 unused2                        : 3;
-	} pid_filter_30c_ext_ind_0_7;
-
-	struct {
-		u32 net_master_read                :17;
-		u32 unused                         :15;
-	} pid_filter_30c_ext_ind_1;
-
-	struct {
-		u32 net_master_write               :17;
-		u32 unused                         :15;
-	} pid_filter_30c_ext_ind_2;
-
-	struct {
-		u32 next_net_master_write          :17;
-		u32 unused                         :15;
-	} pid_filter_30c_ext_ind_3;
-
-	struct {
-		u32 unused1                        : 1;
-		u32 state_write                    :10;
-		u32 reserved1                      : 6;
-		u32 stack_read                     :10;
-		u32 reserved2                      : 5;
-	} pid_filter_30c_ext_ind_4;
-
-	struct {
-		u32 stack_cnt                      :10;
-		u32 unused                         :22;
-	} pid_filter_30c_ext_ind_5;
-
-	struct {
-		u32 pid_fsm_save_reg0              : 2;
-		u32 pid_fsm_save_reg1              : 2;
-		u32 pid_fsm_save_reg2              : 2;
-		u32 pid_fsm_save_reg3              : 2;
-		u32 pid_fsm_save_reg4              : 2;
-		u32 pid_fsm_save_reg300            : 2;
-		u32 write_status1                  : 2;
-		u32 write_status4                  : 2;
-		u32 data_size_reg                  :12;
-		u32 unused                         : 4;
-	} pid_filter_30c_ext_ind_6;
-
-	struct {
-		u32 index_reg                      : 5;
-		u32 extra_index_reg                : 3;
-		u32 AB_select                      : 1;
-		u32 pass_alltables                 : 1;
-		u32 unused                         :22;
-	} index_reg_310;
-
-	struct {
-		u32 PID                            :13;
-		u32 PID_trans                      : 1;
-		u32 PID_enable_bit                 : 1;
-		u32 reserved                       :17;
-	} pid_n_reg_314;
-
-	struct {
-		u32 A4_byte                        : 8;
-		u32 A5_byte                        : 8;
-		u32 A6_byte                        : 8;
-		u32 Enable_bit                     : 1;
-		u32 HighAB_bit                     : 1;
-		u32 reserved                       : 6;
-	} mac_low_reg_318;
-
-	struct {
-		u32 A1_byte                        : 8;
-		u32 A2_byte                        : 8;
-		u32 A3_byte                        : 8;
-		u32 reserved                       : 8;
-	} mac_high_reg_31c;
-
-	struct {
-		u32 reserved                       :16;
-		u32 data_Tag_ID                    :16;
-	} data_tag_400;
-
-	struct {
-		u32 Card_IDbyte6                   : 8;
-		u32 Card_IDbyte5                   : 8;
-		u32 Card_IDbyte4                   : 8;
-		u32 Card_IDbyte3                   : 8;
-	} card_id_408;
-
-	struct {
-		u32 Card_IDbyte2                   : 8;
-		u32 Card_IDbyte1                   : 8;
-	} card_id_40c;
-
-	struct {
-		u32 MAC1                           : 8;
-		u32 MAC2                           : 8;
-		u32 MAC3                           : 8;
-		u32 MAC6                           : 8;
-	} mac_address_418;
-
-	struct {
-		u32 MAC7                           : 8;
-		u32 MAC8                           : 8;
-		u32 reserved                       :16;
-	} mac_address_41c;
-
-	struct {
-		u32 transmitter_data_byte          : 8;
-		u32 ReceiveDataReady               : 1;
-		u32 ReceiveByteFrameError          : 1;
-		u32 txbuffempty                    : 1;
-		u32 reserved                       :21;
-	} ci_600;
-
-	struct {
-		u32 pi_d                           : 8;
-		u32 pi_ha                          :20;
-		u32 pi_rw                          : 1;
-		u32 pi_component_reg               : 3;
-	} pi_604;
-
-	struct {
-		u32 serialReset                    : 1;
-		u32 oncecycle_read                 : 1;
-		u32 Timer_Read_req                 : 1;
-		u32 Timer_Load_req                 : 1;
-		u32 timer_data                     : 7;
-		u32 unused                         : 1;
-		u32 Timer_addr                     : 5;
-		u32 reserved                       : 3;
-		u32 pcmcia_a_mod_pwr_n             : 1;
-		u32 pcmcia_b_mod_pwr_n             : 1;
-		u32 config_Done_stat               : 1;
-		u32 config_Init_stat               : 1;
-		u32 config_Prog_n                  : 1;
-		u32 config_wr_n                    : 1;
-		u32 config_cs_n                    : 1;
-		u32 config_cclk                    : 1;
-		u32 pi_CiMax_IRQ_n                 : 1;
-		u32 pi_timeout_status              : 1;
-		u32 pi_wait_n                      : 1;
-		u32 pi_busy_n                      : 1;
-	} pi_608;
-
-	struct {
-		u32 PID                            :13;
-		u32 key_enable                     : 1;
-		u32 key_code                       : 2;
-		u32 key_array_col                  : 3;
-		u32 key_array_row                  : 5;
-		u32 dvb_en                         : 1;
-		u32 rw_flag                        : 1;
-		u32 reserved                       : 6;
-	} dvb_reg_60c;
-
-	struct {
-		u32 sram_addr                      :15;
-		u32 sram_rw                        : 1;
-		u32 sram_data                      : 8;
-		u32 sc_xfer_bit                    : 1;
-		u32 reserved1                      : 3;
-		u32 oe_pin_reg                     : 1;
-		u32 ce_pin_reg                     : 1;
-		u32 reserved2                      : 1;
-		u32 start_sram_ibi                 : 1;
-	} sram_ctrl_reg_700;
-
-	struct {
-		u32 net_addr_read                  :16;
-		u32 net_addr_write                 :16;
-	} net_buf_reg_704;
-
-	struct {
-		u32 cai_read                       :11;
-		u32 reserved1                      : 5;
-		u32 cai_write                      :11;
-		u32 reserved2                      : 6;
-		u32 cai_cnt                        : 4;
-	} cai_buf_reg_708;
-
-	struct {
-		u32 cao_read                       :11;
-		u32 reserved1                      : 5;
-		u32 cap_write                      :11;
-		u32 reserved2                      : 6;
-		u32 cao_cnt                        : 4;
-	} cao_buf_reg_70c;
-
-	struct {
-		u32 media_read                     :11;
-		u32 reserved1                      : 5;
-		u32 media_write                    :11;
-		u32 reserved2                      : 6;
-		u32 media_cnt                      : 4;
-	} media_buf_reg_710;
-
-	struct {
-		u32 NET_Dest                       : 2;
-		u32 CAI_Dest                       : 2;
-		u32 CAO_Dest                       : 2;
-		u32 MEDIA_Dest                     : 2;
-		u32 net_ovflow_error               : 1;
-		u32 media_ovflow_error             : 1;
-		u32 cai_ovflow_error               : 1;
-		u32 cao_ovflow_error               : 1;
-		u32 ctrl_usb_wan                   : 1;
-		u32 ctrl_sramdma                   : 1;
-		u32 ctrl_maximumfill               : 1;
-		u32 reserved                       :17;
-	} sram_dest_reg_714;
-
-	struct {
-		u32 net_cnt                        :12;
-		u32 reserved1                      : 4;
-		u32 net_addr_read                  : 1;
-		u32 reserved2                      : 3;
-		u32 net_addr_write                 : 1;
-		u32 reserved3                      :11;
-	} net_buf_reg_718;
-
-	struct {
-		u32 wan_speed_sig                  : 2;
-		u32 reserved1                      : 6;
-		u32 wan_wait_state                 : 8;
-		u32 sram_chip                      : 2;
-		u32 sram_memmap                    : 2;
-		u32 reserved2                      : 4;
-		u32 wan_pkt_frame                  : 4;
-		u32 reserved3                      : 4;
-	} wan_ctrl_reg_71c;
-} flexcop_ibi_value;
-
-#endif
diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig
deleted file mode 100644
index 8668e63..0000000
--- a/drivers/media/dvb/bt8xx/Kconfig
+++ /dev/null
@@ -1,22 +0,0 @@
-config DVB_BT8XX
-	tristate "BT8xx based PCI cards"
-	depends on DVB_CORE && PCI && I2C && VIDEO_BT848
-	select DVB_MT352 if !DVB_FE_CUSTOMISE
-	select DVB_SP887X if !DVB_FE_CUSTOMISE
-	select DVB_NXT6000 if !DVB_FE_CUSTOMISE
-	select DVB_CX24110 if !DVB_FE_CUSTOMISE
-	select DVB_OR51211 if !DVB_FE_CUSTOMISE
-	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
-	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
-	help
-	  Support for PCI cards based on the Bt8xx PCI bridge. Examples are
-	  the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards,
-	  the pcHDTV HD2000 cards, the DViCO FusionHDTV Lite cards, and
-	  some AVerMedia cards.
-
-	  Since these cards have no MPEG decoder onboard, they transmit
-	  only compressed MPEG data over the PCI bus, so you need
-	  an external software decoder to watch TV on your computer.
-
-	  Say Y if you own such a device and want to use it.
diff --git a/drivers/media/dvb/bt8xx/Makefile b/drivers/media/dvb/bt8xx/Makefile
deleted file mode 100644
index 0713b3a..0000000
--- a/drivers/media/dvb/bt8xx/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-obj-$(CONFIG_DVB_BT8XX) += bt878.o dvb-bt8xx.o dst.o dst_ca.o
-
-ccflags-y += -Idrivers/media/dvb/dvb-core
-ccflags-y += -Idrivers/media/dvb/frontends
-ccflags-y += -Idrivers/media/video/bt8xx
-ccflags-y += -Idrivers/media/common/tuners
diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c
deleted file mode 100644
index b34fa95..0000000
--- a/drivers/media/dvb/bt8xx/bt878.c
+++ /dev/null
@@ -1,609 +0,0 @@
-/*
- * bt878.c: part of the driver for the Pinnacle PCTV Sat DVB PCI card
- *
- * Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@htp-tel.de>
- *
- * large parts based on the bttv driver
- * Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@metzlerbros.de)
- *                        & Marcus Metzler (mocm@metzlerbros.de)
- * (c) 1999,2000 Gerd Knorr <kraxel@goldbach.in-berlin.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <linux/ioport.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/kmod.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "bt878.h"
-#include "dst_priv.h"
-
-
-/**************************************/
-/* Miscellaneous utility  definitions */
-/**************************************/
-
-static unsigned int bt878_verbose = 1;
-static unsigned int bt878_debug;
-
-module_param_named(verbose, bt878_verbose, int, 0444);
-MODULE_PARM_DESC(verbose,
-		 "verbose startup messages, default is 1 (yes)");
-module_param_named(debug, bt878_debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off debugging, default is 0 (off).");
-
-int bt878_num;
-struct bt878 bt878[BT878_MAX];
-
-EXPORT_SYMBOL(bt878_num);
-EXPORT_SYMBOL(bt878);
-
-#define btwrite(dat,adr)    bmtwrite((dat), (bt->bt878_mem+(adr)))
-#define btread(adr)         bmtread(bt->bt878_mem+(adr))
-
-#define btand(dat,adr)      btwrite((dat) & btread(adr), adr)
-#define btor(dat,adr)       btwrite((dat) | btread(adr), adr)
-#define btaor(dat,mask,adr) btwrite((dat) | ((mask) & btread(adr)), adr)
-
-#if defined(dprintk)
-#undef dprintk
-#endif
-#define dprintk(fmt, arg...) \
-	do { \
-		if (bt878_debug) \
-			printk(KERN_DEBUG fmt, ##arg); \
-	} while (0)
-
-static void bt878_mem_free(struct bt878 *bt)
-{
-	if (bt->buf_cpu) {
-		pci_free_consistent(bt->dev, bt->buf_size, bt->buf_cpu,
-				    bt->buf_dma);
-		bt->buf_cpu = NULL;
-	}
-
-	if (bt->risc_cpu) {
-		pci_free_consistent(bt->dev, bt->risc_size, bt->risc_cpu,
-				    bt->risc_dma);
-		bt->risc_cpu = NULL;
-	}
-}
-
-static int bt878_mem_alloc(struct bt878 *bt)
-{
-	if (!bt->buf_cpu) {
-		bt->buf_size = 128 * 1024;
-
-		bt->buf_cpu =
-		    pci_alloc_consistent(bt->dev, bt->buf_size,
-					 &bt->buf_dma);
-
-		if (!bt->buf_cpu)
-			return -ENOMEM;
-
-		memset(bt->buf_cpu, 0, bt->buf_size);
-	}
-
-	if (!bt->risc_cpu) {
-		bt->risc_size = PAGE_SIZE;
-		bt->risc_cpu =
-		    pci_alloc_consistent(bt->dev, bt->risc_size,
-					 &bt->risc_dma);
-
-		if (!bt->risc_cpu) {
-			bt878_mem_free(bt);
-			return -ENOMEM;
-		}
-
-		memset(bt->risc_cpu, 0, bt->risc_size);
-	}
-
-	return 0;
-}
-
-/* RISC instructions */
-#define RISC_WRITE		(0x01 << 28)
-#define RISC_JUMP		(0x07 << 28)
-#define RISC_SYNC		(0x08 << 28)
-
-/* RISC bits */
-#define RISC_WR_SOL		(1 << 27)
-#define RISC_WR_EOL		(1 << 26)
-#define RISC_IRQ		(1 << 24)
-#define RISC_STATUS(status)	((((~status) & 0x0F) << 20) | ((status & 0x0F) << 16))
-#define RISC_SYNC_RESYNC	(1 << 15)
-#define RISC_SYNC_FM1		0x06
-#define RISC_SYNC_VRO		0x0C
-
-#define RISC_FLUSH()		bt->risc_pos = 0
-#define RISC_INSTR(instr)	bt->risc_cpu[bt->risc_pos++] = cpu_to_le32(instr)
-
-static int bt878_make_risc(struct bt878 *bt)
-{
-	bt->block_bytes = bt->buf_size >> 4;
-	bt->block_count = 1 << 4;
-	bt->line_bytes = bt->block_bytes;
-	bt->line_count = bt->block_count;
-
-	while (bt->line_bytes > 4095) {
-		bt->line_bytes >>= 1;
-		bt->line_count <<= 1;
-	}
-
-	if (bt->line_count > 255) {
-		printk(KERN_ERR "bt878: buffer size error!\n");
-		return -EINVAL;
-	}
-	return 0;
-}
-
-
-static void bt878_risc_program(struct bt878 *bt, u32 op_sync_orin)
-{
-	u32 buf_pos = 0;
-	u32 line;
-
-	RISC_FLUSH();
-	RISC_INSTR(RISC_SYNC | RISC_SYNC_FM1 | op_sync_orin);
-	RISC_INSTR(0);
-
-	dprintk("bt878: risc len lines %u, bytes per line %u\n",
-			bt->line_count, bt->line_bytes);
-	for (line = 0; line < bt->line_count; line++) {
-		// At the beginning of every block we issue an IRQ with previous (finished) block number set
-		if (!(buf_pos % bt->block_bytes))
-			RISC_INSTR(RISC_WRITE | RISC_WR_SOL | RISC_WR_EOL |
-				   RISC_IRQ |
-				   RISC_STATUS(((buf_pos /
-						 bt->block_bytes) +
-						(bt->block_count -
-						 1)) %
-					       bt->block_count) | bt->
-				   line_bytes);
-		else
-			RISC_INSTR(RISC_WRITE | RISC_WR_SOL | RISC_WR_EOL |
-				   bt->line_bytes);
-		RISC_INSTR(bt->buf_dma + buf_pos);
-		buf_pos += bt->line_bytes;
-	}
-
-	RISC_INSTR(RISC_SYNC | op_sync_orin | RISC_SYNC_VRO);
-	RISC_INSTR(0);
-
-	RISC_INSTR(RISC_JUMP);
-	RISC_INSTR(bt->risc_dma);
-
-	btwrite((bt->line_count << 16) | bt->line_bytes, BT878_APACK_LEN);
-}
-
-/*****************************/
-/* Start/Stop grabbing funcs */
-/*****************************/
-
-void bt878_start(struct bt878 *bt, u32 controlreg, u32 op_sync_orin,
-		u32 irq_err_ignore)
-{
-	u32 int_mask;
-
-	dprintk("bt878 debug: bt878_start (ctl=%8.8x)\n", controlreg);
-	/* complete the writing of the risc dma program now we have
-	 * the card specifics
-	 */
-	bt878_risc_program(bt, op_sync_orin);
-	controlreg &= ~0x1f;
-	controlreg |= 0x1b;
-
-	btwrite(bt->risc_dma, BT878_ARISC_START);
-
-	/* original int mask had :
-	 *    6    2    8    4    0
-	 * 1111 1111 1000 0000 0000
-	 * SCERR|OCERR|PABORT|RIPERR|FDSR|FTRGT|FBUS|RISCI
-	 * Hacked for DST to:
-	 * SCERR | OCERR | FDSR | FTRGT | FBUS | RISCI
-	 */
-	int_mask = BT878_ASCERR | BT878_AOCERR | BT878_APABORT |
-		BT878_ARIPERR | BT878_APPERR | BT878_AFDSR | BT878_AFTRGT |
-		BT878_AFBUS | BT878_ARISCI;
-
-
-	/* ignore pesky bits */
-	int_mask &= ~irq_err_ignore;
-
-	btwrite(int_mask, BT878_AINT_MASK);
-	btwrite(controlreg, BT878_AGPIO_DMA_CTL);
-}
-
-void bt878_stop(struct bt878 *bt)
-{
-	u32 stat;
-	int i = 0;
-
-	dprintk("bt878 debug: bt878_stop\n");
-
-	btwrite(0, BT878_AINT_MASK);
-	btand(~0x13, BT878_AGPIO_DMA_CTL);
-
-	do {
-		stat = btread(BT878_AINT_STAT);
-		if (!(stat & BT878_ARISC_EN))
-			break;
-		i++;
-	} while (i < 500);
-
-	dprintk("bt878(%d) debug: bt878_stop, i=%d, stat=0x%8.8x\n",
-		bt->nr, i, stat);
-}
-
-EXPORT_SYMBOL(bt878_start);
-EXPORT_SYMBOL(bt878_stop);
-
-/*****************************/
-/* Interrupt service routine */
-/*****************************/
-
-static irqreturn_t bt878_irq(int irq, void *dev_id)
-{
-	u32 stat, astat, mask;
-	int count;
-	struct bt878 *bt;
-
-	bt = (struct bt878 *) dev_id;
-
-	count = 0;
-	while (1) {
-		stat = btread(BT878_AINT_STAT);
-		mask = btread(BT878_AINT_MASK);
-		if (!(astat = (stat & mask)))
-			return IRQ_NONE;	/* this interrupt is not for me */
-/*		dprintk("bt878(%d) debug: irq count %d, stat 0x%8.8x, mask 0x%8.8x\n",bt->nr,count,stat,mask); */
-		btwrite(astat, BT878_AINT_STAT);	/* try to clear interrupt condition */
-
-
-		if (astat & (BT878_ASCERR | BT878_AOCERR)) {
-			if (bt878_verbose) {
-				printk(KERN_INFO
-				       "bt878(%d): irq%s%s risc_pc=%08x\n",
-				       bt->nr,
-				       (astat & BT878_ASCERR) ? " SCERR" :
-				       "",
-				       (astat & BT878_AOCERR) ? " OCERR" :
-				       "", btread(BT878_ARISC_PC));
-			}
-		}
-		if (astat & (BT878_APABORT | BT878_ARIPERR | BT878_APPERR)) {
-			if (bt878_verbose) {
-				printk(KERN_INFO
-				     "bt878(%d): irq%s%s%s risc_pc=%08x\n",
-				     bt->nr,
-				     (astat & BT878_APABORT) ? " PABORT" :
-				     "",
-				     (astat & BT878_ARIPERR) ? " RIPERR" :
-				     "",
-				     (astat & BT878_APPERR) ? " PPERR" :
-				     "", btread(BT878_ARISC_PC));
-			}
-		}
-		if (astat & (BT878_AFDSR | BT878_AFTRGT | BT878_AFBUS)) {
-			if (bt878_verbose) {
-				printk(KERN_INFO
-				     "bt878(%d): irq%s%s%s risc_pc=%08x\n",
-				     bt->nr,
-				     (astat & BT878_AFDSR) ? " FDSR" : "",
-				     (astat & BT878_AFTRGT) ? " FTRGT" :
-				     "",
-				     (astat & BT878_AFBUS) ? " FBUS" : "",
-				     btread(BT878_ARISC_PC));
-			}
-		}
-		if (astat & BT878_ARISCI) {
-			bt->finished_block = (stat & BT878_ARISCS) >> 28;
-			tasklet_schedule(&bt->tasklet);
-			break;
-		}
-		count++;
-		if (count > 20) {
-			btwrite(0, BT878_AINT_MASK);
-			printk(KERN_ERR
-			       "bt878(%d): IRQ lockup, cleared int mask\n",
-			       bt->nr);
-			break;
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-int
-bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *mp)
-{
-	int retval;
-
-	retval = 0;
-	if (mutex_lock_interruptible(&bt->gpio_lock))
-		return -ERESTARTSYS;
-	/* special gpio signal */
-	switch (cmd) {
-	    case DST_IG_ENABLE:
-		// dprintk("dvb_bt8xx: dst enable mask 0x%02x enb 0x%02x \n", mp->dstg.enb.mask, mp->dstg.enb.enable);
-		retval = bttv_gpio_enable(bt->bttv_nr,
-				mp->enb.mask,
-				mp->enb.enable);
-		break;
-	    case DST_IG_WRITE:
-		// dprintk("dvb_bt8xx: dst write gpio mask 0x%02x out 0x%02x\n", mp->dstg.outp.mask, mp->dstg.outp.highvals);
-		retval = bttv_write_gpio(bt->bttv_nr,
-				mp->outp.mask,
-				mp->outp.highvals);
-
-		break;
-	    case DST_IG_READ:
-		/* read */
-		retval =  bttv_read_gpio(bt->bttv_nr, &mp->rd.value);
-		// dprintk("dvb_bt8xx: dst read gpio 0x%02x\n", (unsigned)mp->dstg.rd.value);
-		break;
-	    case DST_IG_TS:
-		/* Set packet size */
-		bt->TS_Size = mp->psize;
-		break;
-
-	    default:
-		retval = -EINVAL;
-		break;
-	}
-	mutex_unlock(&bt->gpio_lock);
-	return retval;
-}
-
-EXPORT_SYMBOL(bt878_device_control);
-
-#define BROOKTREE_878_DEVICE(vend, dev, name) \
-	{ \
-		.vendor = PCI_VENDOR_ID_BROOKTREE, \
-		.device = PCI_DEVICE_ID_BROOKTREE_878, \
-		.subvendor = (vend), .subdevice = (dev), \
-		.driver_data = (unsigned long) name \
-	}
-
-static struct pci_device_id bt878_pci_tbl[] __devinitdata = {
-	BROOKTREE_878_DEVICE(0x0071, 0x0101, "Nebula Electronics DigiTV"),
-	BROOKTREE_878_DEVICE(0x1461, 0x0761, "AverMedia AverTV DVB-T 761"),
-	BROOKTREE_878_DEVICE(0x11bd, 0x001c, "Pinnacle PCTV Sat"),
-	BROOKTREE_878_DEVICE(0x11bd, 0x0026, "Pinnacle PCTV SAT CI"),
-	BROOKTREE_878_DEVICE(0x1822, 0x0001, "Twinhan VisionPlus DVB"),
-	BROOKTREE_878_DEVICE(0x270f, 0xfc00,
-				"ChainTech digitop DST-1000 DVB-S"),
-	BROOKTREE_878_DEVICE(0x1461, 0x0771, "AVermedia AverTV DVB-T 771"),
-	BROOKTREE_878_DEVICE(0x18ac, 0xdb10, "DViCO FusionHDTV DVB-T Lite"),
-	BROOKTREE_878_DEVICE(0x18ac, 0xdb11, "Ultraview DVB-T Lite"),
-	BROOKTREE_878_DEVICE(0x18ac, 0xd500, "DViCO FusionHDTV 5 Lite"),
-	BROOKTREE_878_DEVICE(0x7063, 0x2000, "pcHDTV HD-2000 TV"),
-	BROOKTREE_878_DEVICE(0x1822, 0x0026, "DNTV Live! Mini"),
-	{ }
-};
-
-MODULE_DEVICE_TABLE(pci, bt878_pci_tbl);
-
-static const char * __devinit card_name(const struct pci_device_id *id)
-{
-	return id->driver_data ? (const char *)id->driver_data : "Unknown";
-}
-
-/***********************/
-/* PCI device handling */
-/***********************/
-
-static int __devinit bt878_probe(struct pci_dev *dev,
-				 const struct pci_device_id *pci_id)
-{
-	int result = 0;
-	unsigned char lat;
-	struct bt878 *bt;
-#if defined(__powerpc__)
-	unsigned int cmd;
-#endif
-	unsigned int cardid;
-
-	printk(KERN_INFO "bt878: Bt878 AUDIO function found (%d).\n",
-	       bt878_num);
-	if (bt878_num >= BT878_MAX) {
-		printk(KERN_ERR "bt878: Too many devices inserted\n");
-		result = -ENOMEM;
-		goto fail0;
-	}
-	if (pci_enable_device(dev))
-		return -EIO;
-
-	cardid = dev->subsystem_device << 16;
-	cardid |= dev->subsystem_vendor;
-
-	printk(KERN_INFO "%s: card id=[0x%x],[ %s ] has DVB functions.\n",
-				__func__, cardid, card_name(pci_id));
-
-	bt = &bt878[bt878_num];
-	bt->dev = dev;
-	bt->nr = bt878_num;
-	bt->shutdown = 0;
-
-	bt->id = dev->device;
-	bt->irq = dev->irq;
-	bt->bt878_adr = pci_resource_start(dev, 0);
-	if (!request_mem_region(pci_resource_start(dev, 0),
-				pci_resource_len(dev, 0), "bt878")) {
-		result = -EBUSY;
-		goto fail0;
-	}
-
-	bt->revision = dev->revision;
-	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
-
-
-	printk(KERN_INFO "bt878(%d): Bt%x (rev %d) at %02x:%02x.%x, ",
-	       bt878_num, bt->id, bt->revision, dev->bus->number,
-	       PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-	printk("irq: %d, latency: %d, memory: 0x%lx\n",
-	       bt->irq, lat, bt->bt878_adr);
-
-
-#if defined(__powerpc__)
-	/* on OpenFirmware machines (PowerMac at least), PCI memory cycle */
-	/* response on cards with no firmware is not enabled by OF */
-	pci_read_config_dword(dev, PCI_COMMAND, &cmd);
-	cmd = (cmd | PCI_COMMAND_MEMORY);
-	pci_write_config_dword(dev, PCI_COMMAND, cmd);
-#endif
-
-#ifdef __sparc__
-	bt->bt878_mem = (unsigned char *) bt->bt878_adr;
-#else
-	bt->bt878_mem = ioremap(bt->bt878_adr, 0x1000);
-#endif
-
-	/* clear interrupt mask */
-	btwrite(0, BT848_INT_MASK);
-
-	result = request_irq(bt->irq, bt878_irq,
-			     IRQF_SHARED | IRQF_DISABLED, "bt878",
-			     (void *) bt);
-	if (result == -EINVAL) {
-		printk(KERN_ERR "bt878(%d): Bad irq number or handler\n",
-		       bt878_num);
-		goto fail1;
-	}
-	if (result == -EBUSY) {
-		printk(KERN_ERR
-		       "bt878(%d): IRQ %d busy, change your PnP config in BIOS\n",
-		       bt878_num, bt->irq);
-		goto fail1;
-	}
-	if (result < 0)
-		goto fail1;
-
-	pci_set_master(dev);
-	pci_set_drvdata(dev, bt);
-
-	if ((result = bt878_mem_alloc(bt))) {
-		printk(KERN_ERR "bt878: failed to allocate memory!\n");
-		goto fail2;
-	}
-
-	bt878_make_risc(bt);
-	btwrite(0, BT878_AINT_MASK);
-	bt878_num++;
-
-	return 0;
-
-      fail2:
-	free_irq(bt->irq, bt);
-      fail1:
-	release_mem_region(pci_resource_start(bt->dev, 0),
-			   pci_resource_len(bt->dev, 0));
-      fail0:
-	pci_disable_device(dev);
-	return result;
-}
-
-static void __devexit bt878_remove(struct pci_dev *pci_dev)
-{
-	u8 command;
-	struct bt878 *bt = pci_get_drvdata(pci_dev);
-
-	if (bt878_verbose)
-		printk(KERN_INFO "bt878(%d): unloading\n", bt->nr);
-
-	/* turn off all capturing, DMA and IRQs */
-	btand(~0x13, BT878_AGPIO_DMA_CTL);
-
-	/* first disable interrupts before unmapping the memory! */
-	btwrite(0, BT878_AINT_MASK);
-	btwrite(~0U, BT878_AINT_STAT);
-
-	/* disable PCI bus-mastering */
-	pci_read_config_byte(bt->dev, PCI_COMMAND, &command);
-	/* Should this be &=~ ?? */
-	command &= ~PCI_COMMAND_MASTER;
-	pci_write_config_byte(bt->dev, PCI_COMMAND, command);
-
-	free_irq(bt->irq, bt);
-	printk(KERN_DEBUG "bt878_mem: 0x%p.\n", bt->bt878_mem);
-	if (bt->bt878_mem)
-		iounmap(bt->bt878_mem);
-
-	release_mem_region(pci_resource_start(bt->dev, 0),
-			   pci_resource_len(bt->dev, 0));
-	/* wake up any waiting processes
-	   because shutdown flag is set, no new processes (in this queue)
-	   are expected
-	 */
-	bt->shutdown = 1;
-	bt878_mem_free(bt);
-
-	pci_set_drvdata(pci_dev, NULL);
-	pci_disable_device(pci_dev);
-	return;
-}
-
-static struct pci_driver bt878_pci_driver = {
-      .name	= "bt878",
-      .id_table = bt878_pci_tbl,
-      .probe	= bt878_probe,
-      .remove	= __devexit_p(bt878_remove),
-};
-
-/*******************************/
-/* Module management functions */
-/*******************************/
-
-static int __init bt878_init_module(void)
-{
-	bt878_num = 0;
-
-	printk(KERN_INFO "bt878: AUDIO driver version %d.%d.%d loaded\n",
-	       (BT878_VERSION_CODE >> 16) & 0xff,
-	       (BT878_VERSION_CODE >> 8) & 0xff,
-	       BT878_VERSION_CODE & 0xff);
-
-	return pci_register_driver(&bt878_pci_driver);
-}
-
-static void __exit bt878_cleanup_module(void)
-{
-	pci_unregister_driver(&bt878_pci_driver);
-}
-
-module_init(bt878_init_module);
-module_exit(bt878_cleanup_module);
-
-MODULE_LICENSE("GPL");
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/bt8xx/bt878.h b/drivers/media/dvb/bt8xx/bt878.h
deleted file mode 100644
index d19b592..0000000
--- a/drivers/media/dvb/bt8xx/bt878.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
-    bt878.h - Bt878 audio module (register offsets)
-
-    Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@htp-tel.de>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef _BT878_H_
-#define _BT878_H_
-
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-
-#include "bt848.h"
-#include "bttv.h"
-
-#define BT878_VERSION_CODE 0x000000
-
-#define BT878_AINT_STAT		0x100
-#define BT878_ARISCS		(0xf<<28)
-#define BT878_ARISC_EN		(1<<27)
-#define BT878_ASCERR		(1<<19)
-#define BT878_AOCERR		(1<<18)
-#define BT878_APABORT		(1<<17)
-#define BT878_ARIPERR		(1<<16)
-#define BT878_APPERR		(1<<15)
-#define BT878_AFDSR		(1<<14)
-#define BT878_AFTRGT		(1<<13)
-#define BT878_AFBUS		(1<<12)
-#define BT878_ARISCI		(1<<11)
-#define BT878_AOFLOW		(1<<3)
-
-#define BT878_AINT_MASK		0x104
-
-#define BT878_AGPIO_DMA_CTL	0x10c
-#define BT878_A_GAIN		(0xf<<28)
-#define BT878_A_G2X		(1<<27)
-#define BT878_A_PWRDN		(1<<26)
-#define BT878_A_SEL		(3<<24)
-#define BT878_DA_SCE		(1<<23)
-#define BT878_DA_LRI		(1<<22)
-#define BT878_DA_MLB		(1<<21)
-#define BT878_DA_LRD		(0x1f<<16)
-#define BT878_DA_DPM		(1<<15)
-#define BT878_DA_SBR		(1<<14)
-#define BT878_DA_ES2		(1<<13)
-#define BT878_DA_LMT		(1<<12)
-#define BT878_DA_SDR		(0xf<<8)
-#define BT878_DA_IOM		(3<<6)
-#define BT878_DA_APP		(1<<5)
-#define BT878_ACAP_EN		(1<<4)
-#define BT878_PKTP		(3<<2)
-#define BT878_RISC_EN		(1<<1)
-#define BT878_FIFO_EN		1
-
-#define BT878_APACK_LEN		0x110
-#define BT878_AFP_LEN		(0xff<<16)
-#define BT878_ALP_LEN		0xfff
-
-#define BT878_ARISC_START	0x114
-
-#define BT878_ARISC_PC		0x120
-
-/* BT878 FUNCTION 0 REGISTERS */
-#define BT878_GPIO_DMA_CTL	0x10c
-
-/* Interrupt register */
-#define BT878_INT_STAT		0x100
-#define BT878_INT_MASK		0x104
-#define BT878_I2CRACK		(1<<25)
-#define BT878_I2CDONE		(1<<8)
-
-#define BT878_MAX 4
-
-#define BT878_RISC_SYNC_MASK	(1 << 15)
-
-
-#define BTTV_BOARD_UNKNOWN                 0x00
-#define BTTV_BOARD_PINNACLESAT             0x5e
-#define BTTV_BOARD_NEBULA_DIGITV           0x68
-#define BTTV_BOARD_PC_HDTV                 0x70
-#define BTTV_BOARD_TWINHAN_DST             0x71
-#define BTTV_BOARD_AVDVBT_771              0x7b
-#define BTTV_BOARD_AVDVBT_761              0x7c
-#define BTTV_BOARD_DVICO_DVBT_LITE         0x80
-#define BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE 0x87
-
-extern int bt878_num;
-
-struct bt878 {
-	struct mutex gpio_lock;
-	unsigned int nr;
-	unsigned int bttv_nr;
-	struct i2c_adapter *adapter;
-	struct pci_dev *dev;
-	unsigned int id;
-	unsigned int TS_Size;
-	unsigned char revision;
-	unsigned int irq;
-	unsigned long bt878_adr;
-	volatile void __iomem *bt878_mem; /* function 1 */
-
-	volatile u32 finished_block;
-	volatile u32 last_block;
-	u32 block_count;
-	u32 block_bytes;
-	u32 line_bytes;
-	u32 line_count;
-
-	u32 buf_size;
-	u8 *buf_cpu;
-	dma_addr_t buf_dma;
-
-	u32 risc_size;
-	__le32 *risc_cpu;
-	dma_addr_t risc_dma;
-	u32 risc_pos;
-
-	struct tasklet_struct tasklet;
-	int shutdown;
-};
-
-extern struct bt878 bt878[BT878_MAX];
-
-void bt878_start(struct bt878 *bt, u32 controlreg, u32 op_sync_orin,
-		u32 irq_err_ignore);
-void bt878_stop(struct bt878 *bt);
-
-#if defined(__powerpc__)	/* big-endian */
-static inline void io_st_le32(volatile unsigned __iomem *addr, unsigned val)
-{
-	st_le32(addr, val);
-	eieio();
-}
-
-#define bmtwrite(dat,adr)  io_st_le32((adr),(dat))
-#define bmtread(adr)       ld_le32((adr))
-#else
-#define bmtwrite(dat,adr)  writel((dat), (adr))
-#define bmtread(adr)       readl(adr)
-#endif
-
-#endif
diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c
deleted file mode 100644
index 430b3eb..0000000
--- a/drivers/media/dvb/bt8xx/dst.c
+++ /dev/null
@@ -1,1873 +0,0 @@
-/*
-	Frontend/Card driver for TwinHan DST Frontend
-	Copyright (C) 2003 Jamie Honan
-	Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/delay.h>
-#include <asm/div64.h>
-#include "dvb_frontend.h"
-#include "dst_priv.h"
-#include "dst_common.h"
-
-static unsigned int verbose = 1;
-module_param(verbose, int, 0644);
-MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
-
-static unsigned int dst_addons;
-module_param(dst_addons, int, 0644);
-MODULE_PARM_DESC(dst_addons, "CA daughterboard, default is 0 (No addons)");
-
-static unsigned int dst_algo;
-module_param(dst_algo, int, 0644);
-MODULE_PARM_DESC(dst_algo, "tuning algo: default is 0=(SW), 1=(HW)");
-
-#define HAS_LOCK		1
-#define ATTEMPT_TUNE		2
-#define HAS_POWER		4
-
-#define DST_ERROR		0
-#define DST_NOTICE		1
-#define DST_INFO		2
-#define DST_DEBUG		3
-
-#define dprintk(x, y, z, format, arg...) do {				\
-	if (z) {							\
-		if	((x > DST_ERROR) && (x > y))			\
-			printk(KERN_ERR "dst(%d) %s: " format "\n",	\
-				state->bt->nr, __func__ , ##arg);	\
-		else if	((x > DST_NOTICE) && (x > y))			\
-			printk(KERN_NOTICE "dst(%d) %s: " format "\n",  \
-				state->bt->nr, __func__ , ##arg);	\
-		else if ((x > DST_INFO) && (x > y))			\
-			printk(KERN_INFO "dst(%d) %s: " format "\n",	\
-				state->bt->nr, __func__ , ##arg);	\
-		else if ((x > DST_DEBUG) && (x > y))			\
-			printk(KERN_DEBUG "dst(%d) %s: " format "\n",	\
-				state->bt->nr,  __func__ , ##arg);	\
-	} else {							\
-		if (x > y)						\
-			printk(format, ##arg);				\
-	}								\
-} while(0)
-
-static int dst_command(struct dst_state *state, u8 *data, u8 len);
-
-static void dst_packsize(struct dst_state *state, int psize)
-{
-	union dst_gpio_packet bits;
-
-	bits.psize = psize;
-	bt878_device_control(state->bt, DST_IG_TS, &bits);
-}
-
-static int dst_gpio_outb(struct dst_state *state, u32 mask, u32 enbb,
-			 u32 outhigh, int delay)
-{
-	union dst_gpio_packet enb;
-	union dst_gpio_packet bits;
-	int err;
-
-	enb.enb.mask = mask;
-	enb.enb.enable = enbb;
-
-	dprintk(verbose, DST_INFO, 1, "mask=[%04x], enbb=[%04x], outhigh=[%04x]", mask, enbb, outhigh);
-	if ((err = bt878_device_control(state->bt, DST_IG_ENABLE, &enb)) < 0) {
-		dprintk(verbose, DST_INFO, 1, "dst_gpio_enb error (err == %i, mask == %02x, enb == %02x)", err, mask, enbb);
-		return -EREMOTEIO;
-	}
-	udelay(1000);
-	/* because complete disabling means no output, no need to do output packet */
-	if (enbb == 0)
-		return 0;
-	if (delay)
-		msleep(10);
-	bits.outp.mask = enbb;
-	bits.outp.highvals = outhigh;
-	if ((err = bt878_device_control(state->bt, DST_IG_WRITE, &bits)) < 0) {
-		dprintk(verbose, DST_INFO, 1, "dst_gpio_outb error (err == %i, enbb == %02x, outhigh == %02x)", err, enbb, outhigh);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int dst_gpio_inb(struct dst_state *state, u8 *result)
-{
-	union dst_gpio_packet rd_packet;
-	int err;
-
-	*result = 0;
-	if ((err = bt878_device_control(state->bt, DST_IG_READ, &rd_packet)) < 0) {
-		dprintk(verbose, DST_ERROR, 1, "dst_gpio_inb error (err == %i)", err);
-		return -EREMOTEIO;
-	}
-	*result = (u8) rd_packet.rd.value;
-
-	return 0;
-}
-
-int rdc_reset_state(struct dst_state *state)
-{
-	dprintk(verbose, DST_INFO, 1, "Resetting state machine");
-	if (dst_gpio_outb(state, RDC_8820_INT, RDC_8820_INT, 0, NO_DELAY) < 0) {
-		dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !");
-		return -1;
-	}
-	msleep(10);
-	if (dst_gpio_outb(state, RDC_8820_INT, RDC_8820_INT, RDC_8820_INT, NO_DELAY) < 0) {
-		dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !");
-		msleep(10);
-		return -1;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(rdc_reset_state);
-
-static int rdc_8820_reset(struct dst_state *state)
-{
-	dprintk(verbose, DST_DEBUG, 1, "Resetting DST");
-	if (dst_gpio_outb(state, RDC_8820_RESET, RDC_8820_RESET, 0, NO_DELAY) < 0) {
-		dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !");
-		return -1;
-	}
-	udelay(1000);
-	if (dst_gpio_outb(state, RDC_8820_RESET, RDC_8820_RESET, RDC_8820_RESET, DELAY) < 0) {
-		dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !");
-		return -1;
-	}
-
-	return 0;
-}
-
-static int dst_pio_enable(struct dst_state *state)
-{
-	if (dst_gpio_outb(state, ~0, RDC_8820_PIO_0_ENABLE, 0, NO_DELAY) < 0) {
-		dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !");
-		return -1;
-	}
-	udelay(1000);
-
-	return 0;
-}
-
-int dst_pio_disable(struct dst_state *state)
-{
-	if (dst_gpio_outb(state, ~0, RDC_8820_PIO_0_DISABLE, RDC_8820_PIO_0_DISABLE, NO_DELAY) < 0) {
-		dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !");
-		return -1;
-	}
-	if (state->type_flags & DST_TYPE_HAS_FW_1)
-		udelay(1000);
-
-	return 0;
-}
-EXPORT_SYMBOL(dst_pio_disable);
-
-int dst_wait_dst_ready(struct dst_state *state, u8 delay_mode)
-{
-	u8 reply;
-	int i;
-
-	for (i = 0; i < 200; i++) {
-		if (dst_gpio_inb(state, &reply) < 0) {
-			dprintk(verbose, DST_ERROR, 1, "dst_gpio_inb ERROR !");
-			return -1;
-		}
-		if ((reply & RDC_8820_PIO_0_ENABLE) == 0) {
-			dprintk(verbose, DST_INFO, 1, "dst wait ready after %d", i);
-			return 1;
-		}
-		msleep(10);
-	}
-	dprintk(verbose, DST_NOTICE, 1, "dst wait NOT ready after %d", i);
-
-	return 0;
-}
-EXPORT_SYMBOL(dst_wait_dst_ready);
-
-int dst_error_recovery(struct dst_state *state)
-{
-	dprintk(verbose, DST_NOTICE, 1, "Trying to return from previous errors.");
-	dst_pio_disable(state);
-	msleep(10);
-	dst_pio_enable(state);
-	msleep(10);
-
-	return 0;
-}
-EXPORT_SYMBOL(dst_error_recovery);
-
-int dst_error_bailout(struct dst_state *state)
-{
-	dprintk(verbose, DST_INFO, 1, "Trying to bailout from previous error.");
-	rdc_8820_reset(state);
-	dst_pio_disable(state);
-	msleep(10);
-
-	return 0;
-}
-EXPORT_SYMBOL(dst_error_bailout);
-
-int dst_comm_init(struct dst_state *state)
-{
-	dprintk(verbose, DST_INFO, 1, "Initializing DST.");
-	if ((dst_pio_enable(state)) < 0) {
-		dprintk(verbose, DST_ERROR, 1, "PIO Enable Failed");
-		return -1;
-	}
-	if ((rdc_reset_state(state)) < 0) {
-		dprintk(verbose, DST_ERROR, 1, "RDC 8820 State RESET Failed.");
-		return -1;
-	}
-	if (state->type_flags & DST_TYPE_HAS_FW_1)
-		msleep(100);
-	else
-		msleep(5);
-
-	return 0;
-}
-EXPORT_SYMBOL(dst_comm_init);
-
-int write_dst(struct dst_state *state, u8 *data, u8 len)
-{
-	struct i2c_msg msg = {
-		.addr = state->config->demod_address,
-		.flags = 0,
-		.buf = data,
-		.len = len
-	};
-
-	int err;
-	u8 cnt, i;
-
-	dprintk(verbose, DST_NOTICE, 0, "writing [ ");
-	for (i = 0; i < len; i++)
-		dprintk(verbose, DST_NOTICE, 0, "%02x ", data[i]);
-	dprintk(verbose, DST_NOTICE, 0, "]\n");
-
-	for (cnt = 0; cnt < 2; cnt++) {
-		if ((err = i2c_transfer(state->i2c, &msg, 1)) < 0) {
-			dprintk(verbose, DST_INFO, 1, "_write_dst error (err == %i, len == 0x%02x, b0 == 0x%02x)", err, len, data[0]);
-			dst_error_recovery(state);
-			continue;
-		} else
-			break;
-	}
-	if (cnt >= 2) {
-		dprintk(verbose, DST_INFO, 1, "RDC 8820 RESET");
-		dst_error_bailout(state);
-
-		return -1;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(write_dst);
-
-int read_dst(struct dst_state *state, u8 *ret, u8 len)
-{
-	struct i2c_msg msg = {
-		.addr = state->config->demod_address,
-		.flags = I2C_M_RD,
-		.buf = ret,
-		.len = len
-	};
-
-	int err;
-	int cnt;
-
-	for (cnt = 0; cnt < 2; cnt++) {
-		if ((err = i2c_transfer(state->i2c, &msg, 1)) < 0) {
-			dprintk(verbose, DST_INFO, 1, "read_dst error (err == %i, len == 0x%02x, b0 == 0x%02x)", err, len, ret[0]);
-			dst_error_recovery(state);
-			continue;
-		} else
-			break;
-	}
-	if (cnt >= 2) {
-		dprintk(verbose, DST_INFO, 1, "RDC 8820 RESET");
-		dst_error_bailout(state);
-
-		return -1;
-	}
-	dprintk(verbose, DST_DEBUG, 1, "reply is 0x%x", ret[0]);
-	for (err = 1; err < len; err++)
-		dprintk(verbose, DST_DEBUG, 0, " 0x%x", ret[err]);
-	if (err > 1)
-		dprintk(verbose, DST_DEBUG, 0, "\n");
-
-	return 0;
-}
-EXPORT_SYMBOL(read_dst);
-
-static int dst_set_polarization(struct dst_state *state)
-{
-	switch (state->voltage) {
-	case SEC_VOLTAGE_13:	/*	Vertical	*/
-		dprintk(verbose, DST_INFO, 1, "Polarization=[Vertical]");
-		state->tx_tuna[8] &= ~0x40;
-		break;
-	case SEC_VOLTAGE_18:	/*	Horizontal	*/
-		dprintk(verbose, DST_INFO, 1, "Polarization=[Horizontal]");
-		state->tx_tuna[8] |= 0x40;
-		break;
-	case SEC_VOLTAGE_OFF:
-		break;
-	}
-
-	return 0;
-}
-
-static int dst_set_freq(struct dst_state *state, u32 freq)
-{
-	state->frequency = freq;
-	dprintk(verbose, DST_INFO, 1, "set Frequency %u", freq);
-
-	if (state->dst_type == DST_TYPE_IS_SAT) {
-		freq = freq / 1000;
-		if (freq < 950 || freq > 2150)
-			return -EINVAL;
-		state->tx_tuna[2] = (freq >> 8);
-		state->tx_tuna[3] = (u8) freq;
-		state->tx_tuna[4] = 0x01;
-		state->tx_tuna[8] &= ~0x04;
-		if (state->type_flags & DST_TYPE_HAS_OBS_REGS) {
-			if (freq < 1531)
-				state->tx_tuna[8] |= 0x04;
-		}
-	} else if (state->dst_type == DST_TYPE_IS_TERR) {
-		freq = freq / 1000;
-		if (freq < 137000 || freq > 858000)
-			return -EINVAL;
-		state->tx_tuna[2] = (freq >> 16) & 0xff;
-		state->tx_tuna[3] = (freq >> 8) & 0xff;
-		state->tx_tuna[4] = (u8) freq;
-	} else if (state->dst_type == DST_TYPE_IS_CABLE) {
-		freq = freq / 1000;
-		state->tx_tuna[2] = (freq >> 16) & 0xff;
-		state->tx_tuna[3] = (freq >> 8) & 0xff;
-		state->tx_tuna[4] = (u8) freq;
-	} else if (state->dst_type == DST_TYPE_IS_ATSC) {
-		freq = freq / 1000;
-		if (freq < 51000 || freq > 858000)
-			return -EINVAL;
-		state->tx_tuna[2] = (freq >> 16) & 0xff;
-		state->tx_tuna[3] = (freq >>  8) & 0xff;
-		state->tx_tuna[4] = (u8) freq;
-		state->tx_tuna[5] = 0x00;		/*	ATSC	*/
-		state->tx_tuna[6] = 0x00;
-		if (state->dst_hw_cap & DST_TYPE_HAS_ANALOG)
-			state->tx_tuna[7] = 0x00;	/*	Digital	*/
-	} else
-		return -EINVAL;
-
-	return 0;
-}
-
-static int dst_set_bandwidth(struct dst_state *state, u32 bandwidth)
-{
-	state->bandwidth = bandwidth;
-
-	if (state->dst_type != DST_TYPE_IS_TERR)
-		return -EOPNOTSUPP;
-
-	switch (bandwidth) {
-	case 6000000:
-		if (state->dst_hw_cap & DST_TYPE_HAS_CA)
-			state->tx_tuna[7] = 0x06;
-		else {
-			state->tx_tuna[6] = 0x06;
-			state->tx_tuna[7] = 0x00;
-		}
-		break;
-	case 7000000:
-		if (state->dst_hw_cap & DST_TYPE_HAS_CA)
-			state->tx_tuna[7] = 0x07;
-		else {
-			state->tx_tuna[6] = 0x07;
-			state->tx_tuna[7] = 0x00;
-		}
-		break;
-	case 8000000:
-		if (state->dst_hw_cap & DST_TYPE_HAS_CA)
-			state->tx_tuna[7] = 0x08;
-		else {
-			state->tx_tuna[6] = 0x08;
-			state->tx_tuna[7] = 0x00;
-		}
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int dst_set_inversion(struct dst_state *state, fe_spectral_inversion_t inversion)
-{
-	state->inversion = inversion;
-	switch (inversion) {
-	case INVERSION_OFF:	/*	Inversion = Normal	*/
-		state->tx_tuna[8] &= ~0x80;
-		break;
-	case INVERSION_ON:
-		state->tx_tuna[8] |= 0x80;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int dst_set_fec(struct dst_state *state, fe_code_rate_t fec)
-{
-	state->fec = fec;
-	return 0;
-}
-
-static fe_code_rate_t dst_get_fec(struct dst_state *state)
-{
-	return state->fec;
-}
-
-static int dst_set_symbolrate(struct dst_state *state, u32 srate)
-{
-	u32 symcalc;
-	u64 sval;
-
-	state->symbol_rate = srate;
-	if (state->dst_type == DST_TYPE_IS_TERR) {
-		return -EOPNOTSUPP;
-	}
-	dprintk(verbose, DST_INFO, 1, "set symrate %u", srate);
-	srate /= 1000;
-	if (state->dst_type == DST_TYPE_IS_SAT) {
-		if (state->type_flags & DST_TYPE_HAS_SYMDIV) {
-			sval = srate;
-			sval <<= 20;
-			do_div(sval, 88000);
-			symcalc = (u32) sval;
-			dprintk(verbose, DST_INFO, 1, "set symcalc %u", symcalc);
-			state->tx_tuna[5] = (u8) (symcalc >> 12);
-			state->tx_tuna[6] = (u8) (symcalc >> 4);
-			state->tx_tuna[7] = (u8) (symcalc << 4);
-		} else {
-			state->tx_tuna[5] = (u8) (srate >> 16) & 0x7f;
-			state->tx_tuna[6] = (u8) (srate >> 8);
-			state->tx_tuna[7] = (u8) srate;
-		}
-		state->tx_tuna[8] &= ~0x20;
-		if (state->type_flags & DST_TYPE_HAS_OBS_REGS) {
-			if (srate > 8000)
-				state->tx_tuna[8] |= 0x20;
-		}
-	} else if (state->dst_type == DST_TYPE_IS_CABLE) {
-		dprintk(verbose, DST_DEBUG, 1, "%s", state->fw_name);
-		if (!strncmp(state->fw_name, "DCTNEW", 6)) {
-			state->tx_tuna[5] = (u8) (srate >> 8);
-			state->tx_tuna[6] = (u8) srate;
-			state->tx_tuna[7] = 0x00;
-		} else if (!strncmp(state->fw_name, "DCT-CI", 6)) {
-			state->tx_tuna[5] = 0x00;
-			state->tx_tuna[6] = (u8) (srate >> 8);
-			state->tx_tuna[7] = (u8) srate;
-		}
-	}
-	return 0;
-}
-
-static int dst_set_modulation(struct dst_state *state, fe_modulation_t modulation)
-{
-	if (state->dst_type != DST_TYPE_IS_CABLE)
-		return -EOPNOTSUPP;
-
-	state->modulation = modulation;
-	switch (modulation) {
-	case QAM_16:
-		state->tx_tuna[8] = 0x10;
-		break;
-	case QAM_32:
-		state->tx_tuna[8] = 0x20;
-		break;
-	case QAM_64:
-		state->tx_tuna[8] = 0x40;
-		break;
-	case QAM_128:
-		state->tx_tuna[8] = 0x80;
-		break;
-	case QAM_256:
-		if (!strncmp(state->fw_name, "DCTNEW", 6))
-			state->tx_tuna[8] = 0xff;
-		else if (!strncmp(state->fw_name, "DCT-CI", 6))
-			state->tx_tuna[8] = 0x00;
-		break;
-	case QPSK:
-	case QAM_AUTO:
-	case VSB_8:
-	case VSB_16:
-	default:
-		return -EINVAL;
-
-	}
-
-	return 0;
-}
-
-static fe_modulation_t dst_get_modulation(struct dst_state *state)
-{
-	return state->modulation;
-}
-
-
-u8 dst_check_sum(u8 *buf, u32 len)
-{
-	u32 i;
-	u8 val = 0;
-	if (!len)
-		return 0;
-	for (i = 0; i < len; i++) {
-		val += buf[i];
-	}
-	return ((~val) + 1);
-}
-EXPORT_SYMBOL(dst_check_sum);
-
-static void dst_type_flags_print(struct dst_state *state)
-{
-	u32 type_flags = state->type_flags;
-
-	dprintk(verbose, DST_ERROR, 0, "DST type flags :");
-	if (type_flags & DST_TYPE_HAS_TS188)
-		dprintk(verbose, DST_ERROR, 0, " 0x%x newtuner", DST_TYPE_HAS_TS188);
-	if (type_flags & DST_TYPE_HAS_NEWTUNE_2)
-		dprintk(verbose, DST_ERROR, 0, " 0x%x newtuner 2", DST_TYPE_HAS_NEWTUNE_2);
-	if (type_flags & DST_TYPE_HAS_TS204)
-		dprintk(verbose, DST_ERROR, 0, " 0x%x ts204", DST_TYPE_HAS_TS204);
-	if (type_flags & DST_TYPE_HAS_VLF)
-		dprintk(verbose, DST_ERROR, 0, " 0x%x VLF", DST_TYPE_HAS_VLF);
-	if (type_flags & DST_TYPE_HAS_SYMDIV)
-		dprintk(verbose, DST_ERROR, 0, " 0x%x symdiv", DST_TYPE_HAS_SYMDIV);
-	if (type_flags & DST_TYPE_HAS_FW_1)
-		dprintk(verbose, DST_ERROR, 0, " 0x%x firmware version = 1", DST_TYPE_HAS_FW_1);
-	if (type_flags & DST_TYPE_HAS_FW_2)
-		dprintk(verbose, DST_ERROR, 0, " 0x%x firmware version = 2", DST_TYPE_HAS_FW_2);
-	if (type_flags & DST_TYPE_HAS_FW_3)
-		dprintk(verbose, DST_ERROR, 0, " 0x%x firmware version = 3", DST_TYPE_HAS_FW_3);
-	dprintk(verbose, DST_ERROR, 0, "\n");
-}
-
-
-static int dst_type_print(struct dst_state *state, u8 type)
-{
-	char *otype;
-	switch (type) {
-	case DST_TYPE_IS_SAT:
-		otype = "satellite";
-		break;
-
-	case DST_TYPE_IS_TERR:
-		otype = "terrestrial";
-		break;
-
-	case DST_TYPE_IS_CABLE:
-		otype = "cable";
-		break;
-
-	case DST_TYPE_IS_ATSC:
-		otype = "atsc";
-		break;
-
-	default:
-		dprintk(verbose, DST_INFO, 1, "invalid dst type %d", type);
-		return -EINVAL;
-	}
-	dprintk(verbose, DST_INFO, 1, "DST type: %s", otype);
-
-	return 0;
-}
-
-static struct tuner_types tuner_list[] = {
-	{
-		.tuner_type = TUNER_TYPE_L64724,
-		.tuner_name = "L 64724",
-		.board_name = "UNKNOWN",
-		.fw_name    = "UNKNOWN"
-	},
-
-	{
-		.tuner_type = TUNER_TYPE_STV0299,
-		.tuner_name = "STV 0299",
-		.board_name = "VP1020",
-		.fw_name    = "DST-MOT"
-	},
-
-	{
-		.tuner_type = TUNER_TYPE_STV0299,
-		.tuner_name = "STV 0299",
-		.board_name = "VP1020",
-		.fw_name    = "DST-03T"
-	},
-
-	{
-		.tuner_type = TUNER_TYPE_MB86A15,
-		.tuner_name = "MB 86A15",
-		.board_name = "VP1022",
-		.fw_name    = "DST-03T"
-	},
-
-	{
-		.tuner_type = TUNER_TYPE_MB86A15,
-		.tuner_name = "MB 86A15",
-		.board_name = "VP1025",
-		.fw_name    = "DST-03T"
-	},
-
-	{
-		.tuner_type = TUNER_TYPE_STV0299,
-		.tuner_name = "STV 0299",
-		.board_name = "VP1030",
-		.fw_name    = "DST-CI"
-	},
-
-	{
-		.tuner_type = TUNER_TYPE_STV0299,
-		.tuner_name = "STV 0299",
-		.board_name = "VP1030",
-		.fw_name    = "DSTMCI"
-	},
-
-	{
-		.tuner_type = TUNER_TYPE_UNKNOWN,
-		.tuner_name = "UNKNOWN",
-		.board_name = "VP2021",
-		.fw_name    = "DCTNEW"
-	},
-
-	{
-		.tuner_type = TUNER_TYPE_UNKNOWN,
-		.tuner_name = "UNKNOWN",
-		.board_name = "VP2030",
-		.fw_name    = "DCT-CI"
-	},
-
-	{
-		.tuner_type = TUNER_TYPE_UNKNOWN,
-		.tuner_name = "UNKNOWN",
-		.board_name = "VP2031",
-		.fw_name    = "DCT-CI"
-	},
-
-	{
-		.tuner_type = TUNER_TYPE_UNKNOWN,
-		.tuner_name = "UNKNOWN",
-		.board_name = "VP2040",
-		.fw_name    = "DCT-CI"
-	},
-
-	{
-		.tuner_type = TUNER_TYPE_UNKNOWN,
-		.tuner_name = "UNKNOWN",
-		.board_name = "VP3020",
-		.fw_name    = "DTTFTA"
-	},
-
-	{
-		.tuner_type = TUNER_TYPE_UNKNOWN,
-		.tuner_name = "UNKNOWN",
-		.board_name = "VP3021",
-		.fw_name    = "DTTFTA"
-	},
-
-	{
-		.tuner_type = TUNER_TYPE_TDA10046,
-		.tuner_name = "TDA10046",
-		.board_name = "VP3040",
-		.fw_name    = "DTT-CI"
-	},
-
-	{
-		.tuner_type = TUNER_TYPE_UNKNOWN,
-		.tuner_name = "UNKNOWN",
-		.board_name = "VP3051",
-		.fw_name    = "DTTNXT"
-	},
-
-	{
-		.tuner_type = TUNER_TYPE_NXT200x,
-		.tuner_name = "NXT200x",
-		.board_name = "VP3220",
-		.fw_name    = "ATSCDI"
-	},
-
-	{
-		.tuner_type = TUNER_TYPE_NXT200x,
-		.tuner_name = "NXT200x",
-		.board_name = "VP3250",
-		.fw_name    = "ATSCAD"
-	},
-};
-
-/*
-	Known cards list
-	Satellite
-	-------------------
-		  200103A
-	VP-1020   DST-MOT	LG(old), TS=188
-
-	VP-1020   DST-03T	LG(new), TS=204
-	VP-1022   DST-03T	LG(new), TS=204
-	VP-1025   DST-03T	LG(new), TS=204
-
-	VP-1030   DSTMCI,	LG(new), TS=188
-	VP-1032   DSTMCI,	LG(new), TS=188
-
-	Cable
-	-------------------
-	VP-2030   DCT-CI,	Samsung, TS=204
-	VP-2021   DCT-CI,	Unknown, TS=204
-	VP-2031   DCT-CI,	Philips, TS=188
-	VP-2040   DCT-CI,	Philips, TS=188, with CA daughter board
-	VP-2040   DCT-CI,	Philips, TS=204, without CA daughter board
-
-	Terrestrial
-	-------------------
-	VP-3050  DTTNXT			 TS=188
-	VP-3040  DTT-CI,	Philips, TS=188
-	VP-3040  DTT-CI,	Philips, TS=204
-
-	ATSC
-	-------------------
-	VP-3220  ATSCDI,		 TS=188
-	VP-3250  ATSCAD,		 TS=188
-
-*/
-
-static struct dst_types dst_tlist[] = {
-	{
-		.device_id = "200103A",
-		.offset = 0,
-		.dst_type =  DST_TYPE_IS_SAT,
-		.type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1 | DST_TYPE_HAS_OBS_REGS,
-		.dst_feature = 0,
-		.tuner_type = 0
-	},	/*	obsolete	*/
-
-	{
-		.device_id = "DST-020",
-		.offset = 0,
-		.dst_type =  DST_TYPE_IS_SAT,
-		.type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1,
-		.dst_feature = 0,
-		.tuner_type = 0
-	},	/*	obsolete	*/
-
-	{
-		.device_id = "DST-030",
-		.offset =  0,
-		.dst_type = DST_TYPE_IS_SAT,
-		.type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_TS188 | DST_TYPE_HAS_FW_1,
-		.dst_feature = 0,
-		.tuner_type = 0
-	},	/*	obsolete	*/
-
-	{
-		.device_id = "DST-03T",
-		.offset = 0,
-		.dst_type = DST_TYPE_IS_SAT,
-		.type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_TS204 | DST_TYPE_HAS_FW_2,
-		.dst_feature = DST_TYPE_HAS_DISEQC3 | DST_TYPE_HAS_DISEQC4 | DST_TYPE_HAS_DISEQC5
-							 | DST_TYPE_HAS_MAC | DST_TYPE_HAS_MOTO,
-		.tuner_type = TUNER_TYPE_MULTI
-	 },
-
-	{
-		.device_id = "DST-MOT",
-		.offset =  0,
-		.dst_type = DST_TYPE_IS_SAT,
-		.type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1,
-		.dst_feature = 0,
-		.tuner_type = 0
-	},	/*	obsolete	*/
-
-	{
-		.device_id = "DST-CI",
-		.offset = 1,
-		.dst_type = DST_TYPE_IS_SAT,
-		.type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_FW_1,
-		.dst_feature = DST_TYPE_HAS_CA,
-		.tuner_type = 0
-	},	/*	An OEM board	*/
-
-	{
-		.device_id = "DSTMCI",
-		.offset = 1,
-		.dst_type = DST_TYPE_IS_SAT,
-		.type_flags = DST_TYPE_HAS_TS188 | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_FW_BUILD | DST_TYPE_HAS_INC_COUNT | DST_TYPE_HAS_VLF,
-		.dst_feature = DST_TYPE_HAS_CA | DST_TYPE_HAS_DISEQC3 | DST_TYPE_HAS_DISEQC4
-							| DST_TYPE_HAS_MOTO | DST_TYPE_HAS_MAC,
-		.tuner_type = TUNER_TYPE_MULTI
-	},
-
-	{
-		.device_id = "DSTFCI",
-		.offset = 1,
-		.dst_type = DST_TYPE_IS_SAT,
-		.type_flags = DST_TYPE_HAS_TS188 | DST_TYPE_HAS_FW_1,
-		.dst_feature = 0,
-		.tuner_type = 0
-	},	/* unknown to vendor	*/
-
-	{
-		.device_id = "DCT-CI",
-		.offset = 1,
-		.dst_type = DST_TYPE_IS_CABLE,
-		.type_flags = DST_TYPE_HAS_MULTI_FE | DST_TYPE_HAS_FW_1	| DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_VLF,
-		.dst_feature = DST_TYPE_HAS_CA,
-		.tuner_type = 0
-	},
-
-	{
-		.device_id = "DCTNEW",
-		.offset = 1,
-		.dst_type = DST_TYPE_IS_CABLE,
-		.type_flags = DST_TYPE_HAS_TS188 | DST_TYPE_HAS_FW_3 | DST_TYPE_HAS_FW_BUILD | DST_TYPE_HAS_MULTI_FE,
-		.dst_feature = 0,
-		.tuner_type = 0
-	},
-
-	{
-		.device_id = "DTT-CI",
-		.offset = 1,
-		.dst_type = DST_TYPE_IS_TERR,
-		.type_flags = DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_MULTI_FE | DST_TYPE_HAS_VLF,
-		.dst_feature = DST_TYPE_HAS_CA,
-		.tuner_type = 0
-	},
-
-	{
-		.device_id = "DTTDIG",
-		.offset = 1,
-		.dst_type = DST_TYPE_IS_TERR,
-		.type_flags = DST_TYPE_HAS_FW_2,
-		.dst_feature = 0,
-		.tuner_type = 0
-	},
-
-	{
-		.device_id = "DTTNXT",
-		.offset = 1,
-		.dst_type = DST_TYPE_IS_TERR,
-		.type_flags = DST_TYPE_HAS_FW_2,
-		.dst_feature = DST_TYPE_HAS_ANALOG,
-		.tuner_type = 0
-	},
-
-	{
-		.device_id = "ATSCDI",
-		.offset = 1,
-		.dst_type = DST_TYPE_IS_ATSC,
-		.type_flags = DST_TYPE_HAS_FW_2,
-		.dst_feature = 0,
-		.tuner_type = 0
-	},
-
-	{
-		.device_id = "ATSCAD",
-		.offset = 1,
-		.dst_type = DST_TYPE_IS_ATSC,
-		.type_flags = DST_TYPE_HAS_MULTI_FE | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_FW_BUILD,
-		.dst_feature = DST_TYPE_HAS_MAC | DST_TYPE_HAS_ANALOG,
-		.tuner_type = 0
-	},
-
-	{ }
-
-};
-
-static int dst_get_mac(struct dst_state *state)
-{
-	u8 get_mac[] = { 0x00, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-	get_mac[7] = dst_check_sum(get_mac, 7);
-	if (dst_command(state, get_mac, 8) < 0) {
-		dprintk(verbose, DST_INFO, 1, "Unsupported Command");
-		return -1;
-	}
-	memset(&state->mac_address, '\0', 8);
-	memcpy(&state->mac_address, &state->rxbuffer, 6);
-	dprintk(verbose, DST_ERROR, 1, "MAC Address=[%pM]", state->mac_address);
-
-	return 0;
-}
-
-static int dst_fw_ver(struct dst_state *state)
-{
-	u8 get_ver[] = { 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-	get_ver[7] = dst_check_sum(get_ver, 7);
-	if (dst_command(state, get_ver, 8) < 0) {
-		dprintk(verbose, DST_INFO, 1, "Unsupported Command");
-		return -1;
-	}
-	memcpy(&state->fw_version, &state->rxbuffer, 8);
-	dprintk(verbose, DST_ERROR, 1, "Firmware Ver = %x.%x Build = %02x, on %x:%x, %x-%x-20%02x",
-		state->fw_version[0] >> 4, state->fw_version[0] & 0x0f,
-		state->fw_version[1],
-		state->fw_version[5], state->fw_version[6],
-		state->fw_version[4], state->fw_version[3], state->fw_version[2]);
-
-	return 0;
-}
-
-static int dst_card_type(struct dst_state *state)
-{
-	int j;
-	struct tuner_types *p_tuner_list = NULL;
-
-	u8 get_type[] = { 0x00, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-	get_type[7] = dst_check_sum(get_type, 7);
-	if (dst_command(state, get_type, 8) < 0) {
-		dprintk(verbose, DST_INFO, 1, "Unsupported Command");
-		return -1;
-	}
-	memset(&state->card_info, '\0', 8);
-	memcpy(&state->card_info, &state->rxbuffer, 7);
-	dprintk(verbose, DST_ERROR, 1, "Device Model=[%s]", &state->card_info[0]);
-
-	for (j = 0, p_tuner_list = tuner_list; j < ARRAY_SIZE(tuner_list); j++, p_tuner_list++) {
-		if (!strcmp(&state->card_info[0], p_tuner_list->board_name)) {
-			state->tuner_type = p_tuner_list->tuner_type;
-			dprintk(verbose, DST_ERROR, 1, "DST has [%s] tuner, tuner type=[%d]",
-				p_tuner_list->tuner_name, p_tuner_list->tuner_type);
-		}
-	}
-
-	return 0;
-}
-
-static int dst_get_vendor(struct dst_state *state)
-{
-	u8 get_vendor[] = { 0x00, 0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-	get_vendor[7] = dst_check_sum(get_vendor, 7);
-	if (dst_command(state, get_vendor, 8) < 0) {
-		dprintk(verbose, DST_INFO, 1, "Unsupported Command");
-		return -1;
-	}
-	memset(&state->vendor, '\0', 8);
-	memcpy(&state->vendor, &state->rxbuffer, 7);
-	dprintk(verbose, DST_ERROR, 1, "Vendor=[%s]", &state->vendor[0]);
-
-	return 0;
-}
-
-static void debug_dst_buffer(struct dst_state *state)
-{
-	int i;
-
-	if (verbose > 2) {
-		printk("%s: [", __func__);
-		for (i = 0; i < 8; i++)
-			printk(" %02x", state->rxbuffer[i]);
-		printk("]\n");
-	}
-}
-
-static int dst_check_stv0299(struct dst_state *state)
-{
-	u8 check_stv0299[] = { 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-
-	check_stv0299[7] = dst_check_sum(check_stv0299, 7);
-	if (dst_command(state, check_stv0299, 8) < 0) {
-		dprintk(verbose, DST_ERROR, 1, "Cmd=[0x04] failed");
-		return -1;
-	}
-	debug_dst_buffer(state);
-
-	if (memcmp(&check_stv0299, &state->rxbuffer, 8)) {
-		dprintk(verbose, DST_ERROR, 1, "Found a STV0299 NIM");
-		state->tuner_type = TUNER_TYPE_STV0299;
-		return 0;
-	}
-
-	return -1;
-}
-
-static int dst_check_mb86a15(struct dst_state *state)
-{
-	u8 check_mb86a15[] = { 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-
-	check_mb86a15[7] = dst_check_sum(check_mb86a15, 7);
-	if (dst_command(state, check_mb86a15, 8) < 0) {
-		dprintk(verbose, DST_ERROR, 1, "Cmd=[0x10], failed");
-		return -1;
-	}
-	debug_dst_buffer(state);
-
-	if (memcmp(&check_mb86a15, &state->rxbuffer, 8) < 0) {
-		dprintk(verbose, DST_ERROR, 1, "Found a MB86A15 NIM");
-		state->tuner_type = TUNER_TYPE_MB86A15;
-		return 0;
-	}
-
-	return -1;
-}
-
-static int dst_get_tuner_info(struct dst_state *state)
-{
-	u8 get_tuner_1[] = { 0x00, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-	u8 get_tuner_2[] = { 0x00, 0x0b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-
-	get_tuner_1[7] = dst_check_sum(get_tuner_1, 7);
-	get_tuner_2[7] = dst_check_sum(get_tuner_2, 7);
-	dprintk(verbose, DST_ERROR, 1, "DST TYpe = MULTI FE");
-	if (state->type_flags & DST_TYPE_HAS_MULTI_FE) {
-		if (dst_command(state, get_tuner_1, 8) < 0) {
-			dprintk(verbose, DST_INFO, 1, "Cmd=[0x13], Unsupported");
-			goto force;
-		}
-	} else {
-		if (dst_command(state, get_tuner_2, 8) < 0) {
-			dprintk(verbose, DST_INFO, 1, "Cmd=[0xb], Unsupported");
-			goto force;
-		}
-	}
-	memcpy(&state->board_info, &state->rxbuffer, 8);
-	if (state->type_flags & DST_TYPE_HAS_MULTI_FE) {
-		dprintk(verbose, DST_ERROR, 1, "DST type has TS=188");
-	}
-	if (state->board_info[0] == 0xbc) {
-		if (state->dst_type != DST_TYPE_IS_ATSC)
-			state->type_flags |= DST_TYPE_HAS_TS188;
-		else
-			state->type_flags |= DST_TYPE_HAS_NEWTUNE_2;
-
-		if (state->board_info[1] == 0x01) {
-			state->dst_hw_cap |= DST_TYPE_HAS_DBOARD;
-			dprintk(verbose, DST_ERROR, 1, "DST has Daughterboard");
-		}
-	}
-
-	return 0;
-force:
-	if (!strncmp(state->fw_name, "DCT-CI", 6)) {
-		state->type_flags |= DST_TYPE_HAS_TS204;
-		dprintk(verbose, DST_ERROR, 1, "Forcing [%s] to TS188", state->fw_name);
-	}
-
-	return -1;
-}
-
-static int dst_get_device_id(struct dst_state *state)
-{
-	u8 reply;
-
-	int i, j;
-	struct dst_types *p_dst_type = NULL;
-	struct tuner_types *p_tuner_list = NULL;
-
-	u8 use_dst_type = 0;
-	u32 use_type_flags = 0;
-
-	static u8 device_type[8] = {0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff};
-
-	state->tuner_type = 0;
-	device_type[7] = dst_check_sum(device_type, 7);
-
-	if (write_dst(state, device_type, FIXED_COMM))
-		return -1;		/*	Write failed		*/
-	if ((dst_pio_disable(state)) < 0)
-		return -1;
-	if (read_dst(state, &reply, GET_ACK))
-		return -1;		/*	Read failure		*/
-	if (reply != ACK) {
-		dprintk(verbose, DST_INFO, 1, "Write not Acknowledged! [Reply=0x%02x]", reply);
-		return -1;		/*	Unack'd write		*/
-	}
-	if (!dst_wait_dst_ready(state, DEVICE_INIT))
-		return -1;		/*	DST not ready yet	*/
-	if (read_dst(state, state->rxbuffer, FIXED_COMM))
-		return -1;
-
-	dst_pio_disable(state);
-	if (state->rxbuffer[7] != dst_check_sum(state->rxbuffer, 7)) {
-		dprintk(verbose, DST_INFO, 1, "Checksum failure!");
-		return -1;		/*	Checksum failure	*/
-	}
-	state->rxbuffer[7] = '\0';
-
-	for (i = 0, p_dst_type = dst_tlist; i < ARRAY_SIZE(dst_tlist); i++, p_dst_type++) {
-		if (!strncmp (&state->rxbuffer[p_dst_type->offset], p_dst_type->device_id, strlen (p_dst_type->device_id))) {
-			use_type_flags = p_dst_type->type_flags;
-			use_dst_type = p_dst_type->dst_type;
-
-			/*	Card capabilities	*/
-			state->dst_hw_cap = p_dst_type->dst_feature;
-			dprintk(verbose, DST_ERROR, 1, "Recognise [%s]", p_dst_type->device_id);
-			strncpy(&state->fw_name[0], p_dst_type->device_id, 6);
-			/*	Multiple tuners		*/
-			if (p_dst_type->tuner_type & TUNER_TYPE_MULTI) {
-				switch (use_dst_type) {
-				case DST_TYPE_IS_SAT:
-					/*	STV0299 check	*/
-					if (dst_check_stv0299(state) < 0) {
-						dprintk(verbose, DST_ERROR, 1, "Unsupported");
-						state->tuner_type = TUNER_TYPE_MB86A15;
-					}
-					break;
-				default:
-					break;
-				}
-				if (dst_check_mb86a15(state) < 0)
-					dprintk(verbose, DST_ERROR, 1, "Unsupported");
-			/*	Single tuner		*/
-			} else {
-				state->tuner_type = p_dst_type->tuner_type;
-			}
-			for (j = 0, p_tuner_list = tuner_list; j < ARRAY_SIZE(tuner_list); j++, p_tuner_list++) {
-				if (!(strncmp(p_dst_type->device_id, p_tuner_list->fw_name, 7)) &&
-					p_tuner_list->tuner_type == state->tuner_type) {
-					dprintk(verbose, DST_ERROR, 1, "[%s] has a [%s]",
-						p_dst_type->device_id, p_tuner_list->tuner_name);
-				}
-			}
-			break;
-		}
-	}
-
-	if (i >= ARRAY_SIZE(dst_tlist)) {
-		dprintk(verbose, DST_ERROR, 1, "Unable to recognize %s or %s", &state->rxbuffer[0], &state->rxbuffer[1]);
-		dprintk(verbose, DST_ERROR, 1, "please email linux-dvb@linuxtv.org with this type in");
-		use_dst_type = DST_TYPE_IS_SAT;
-		use_type_flags = DST_TYPE_HAS_SYMDIV;
-	}
-	dst_type_print(state, use_dst_type);
-	state->type_flags = use_type_flags;
-	state->dst_type = use_dst_type;
-	dst_type_flags_print(state);
-
-	return 0;
-}
-
-static int dst_probe(struct dst_state *state)
-{
-	mutex_init(&state->dst_mutex);
-	if (dst_addons & DST_TYPE_HAS_CA) {
-		if ((rdc_8820_reset(state)) < 0) {
-			dprintk(verbose, DST_ERROR, 1, "RDC 8820 RESET Failed.");
-			return -1;
-		}
-		msleep(4000);
-	} else {
-		msleep(100);
-	}
-	if ((dst_comm_init(state)) < 0) {
-		dprintk(verbose, DST_ERROR, 1, "DST Initialization Failed.");
-		return -1;
-	}
-	msleep(100);
-	if (dst_get_device_id(state) < 0) {
-		dprintk(verbose, DST_ERROR, 1, "unknown device.");
-		return -1;
-	}
-	if (dst_get_mac(state) < 0) {
-		dprintk(verbose, DST_INFO, 1, "MAC: Unsupported command");
-	}
-	if ((state->type_flags & DST_TYPE_HAS_MULTI_FE) || (state->type_flags & DST_TYPE_HAS_FW_BUILD)) {
-		if (dst_get_tuner_info(state) < 0)
-			dprintk(verbose, DST_INFO, 1, "Tuner: Unsupported command");
-	}
-	if (state->type_flags & DST_TYPE_HAS_TS204) {
-		dst_packsize(state, 204);
-	}
-	if (state->type_flags & DST_TYPE_HAS_FW_BUILD) {
-		if (dst_fw_ver(state) < 0) {
-			dprintk(verbose, DST_INFO, 1, "FW: Unsupported command");
-			return 0;
-		}
-		if (dst_card_type(state) < 0) {
-			dprintk(verbose, DST_INFO, 1, "Card: Unsupported command");
-			return 0;
-		}
-		if (dst_get_vendor(state) < 0) {
-			dprintk(verbose, DST_INFO, 1, "Vendor: Unsupported command");
-			return 0;
-		}
-	}
-
-	return 0;
-}
-
-static int dst_command(struct dst_state *state, u8 *data, u8 len)
-{
-	u8 reply;
-
-	mutex_lock(&state->dst_mutex);
-	if ((dst_comm_init(state)) < 0) {
-		dprintk(verbose, DST_NOTICE, 1, "DST Communication Initialization Failed.");
-		goto error;
-	}
-	if (write_dst(state, data, len)) {
-		dprintk(verbose, DST_INFO, 1, "Trying to recover.. ");
-		if ((dst_error_recovery(state)) < 0) {
-			dprintk(verbose, DST_ERROR, 1, "Recovery Failed.");
-			goto error;
-		}
-		goto error;
-	}
-	if ((dst_pio_disable(state)) < 0) {
-		dprintk(verbose, DST_ERROR, 1, "PIO Disable Failed.");
-		goto error;
-	}
-	if (state->type_flags & DST_TYPE_HAS_FW_1)
-		mdelay(3);
-	if (read_dst(state, &reply, GET_ACK)) {
-		dprintk(verbose, DST_DEBUG, 1, "Trying to recover.. ");
-		if ((dst_error_recovery(state)) < 0) {
-			dprintk(verbose, DST_INFO, 1, "Recovery Failed.");
-			goto error;
-		}
-		goto error;
-	}
-	if (reply != ACK) {
-		dprintk(verbose, DST_INFO, 1, "write not acknowledged 0x%02x ", reply);
-		goto error;
-	}
-	if (len >= 2 && data[0] == 0 && (data[1] == 1 || data[1] == 3))
-		goto error;
-	if (state->type_flags & DST_TYPE_HAS_FW_1)
-		mdelay(3);
-	else
-		udelay(2000);
-	if (!dst_wait_dst_ready(state, NO_DELAY))
-		goto error;
-	if (read_dst(state, state->rxbuffer, FIXED_COMM)) {
-		dprintk(verbose, DST_DEBUG, 1, "Trying to recover.. ");
-		if ((dst_error_recovery(state)) < 0) {
-			dprintk(verbose, DST_INFO, 1, "Recovery failed.");
-			goto error;
-		}
-		goto error;
-	}
-	if (state->rxbuffer[7] != dst_check_sum(state->rxbuffer, 7)) {
-		dprintk(verbose, DST_INFO, 1, "checksum failure");
-		goto error;
-	}
-	mutex_unlock(&state->dst_mutex);
-	return 0;
-
-error:
-	mutex_unlock(&state->dst_mutex);
-	return -EIO;
-
-}
-
-static int dst_get_signal(struct dst_state *state)
-{
-	int retval;
-	u8 get_signal[] = { 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfb };
-	//dprintk("%s: Getting Signal strength and other parameters\n", __func__);
-	if ((state->diseq_flags & ATTEMPT_TUNE) == 0) {
-		state->decode_lock = state->decode_strength = state->decode_snr = 0;
-		return 0;
-	}
-	if (0 == (state->diseq_flags & HAS_LOCK)) {
-		state->decode_lock = state->decode_strength = state->decode_snr = 0;
-		return 0;
-	}
-	if (time_after_eq(jiffies, state->cur_jiff + (HZ / 5))) {
-		retval = dst_command(state, get_signal, 8);
-		if (retval < 0)
-			return retval;
-		if (state->dst_type == DST_TYPE_IS_SAT) {
-			state->decode_lock = ((state->rxbuffer[6] & 0x10) == 0) ? 1 : 0;
-			state->decode_strength = state->rxbuffer[5] << 8;
-			state->decode_snr = state->rxbuffer[2] << 8 | state->rxbuffer[3];
-		} else if ((state->dst_type == DST_TYPE_IS_TERR) || (state->dst_type == DST_TYPE_IS_CABLE)) {
-			state->decode_lock = (state->rxbuffer[1]) ? 1 : 0;
-			state->decode_strength = state->rxbuffer[4] << 8;
-			state->decode_snr = state->rxbuffer[3] << 8;
-		} else if (state->dst_type == DST_TYPE_IS_ATSC) {
-			state->decode_lock = (state->rxbuffer[6] == 0x00) ? 1 : 0;
-			state->decode_strength = state->rxbuffer[4] << 8;
-			state->decode_snr = state->rxbuffer[2] << 8 | state->rxbuffer[3];
-		}
-		state->cur_jiff = jiffies;
-	}
-	return 0;
-}
-
-static int dst_tone_power_cmd(struct dst_state *state)
-{
-	u8 paket[8] = { 0x00, 0x09, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00 };
-
-	if (state->dst_type != DST_TYPE_IS_SAT)
-		return -EOPNOTSUPP;
-	paket[4] = state->tx_tuna[4];
-	paket[2] = state->tx_tuna[2];
-	paket[3] = state->tx_tuna[3];
-	paket[7] = dst_check_sum (paket, 7);
-	return dst_command(state, paket, 8);
-}
-
-static int dst_get_tuna(struct dst_state *state)
-{
-	int retval;
-
-	if ((state->diseq_flags & ATTEMPT_TUNE) == 0)
-		return 0;
-	state->diseq_flags &= ~(HAS_LOCK);
-	if (!dst_wait_dst_ready(state, NO_DELAY))
-		return -EIO;
-	if ((state->type_flags & DST_TYPE_HAS_VLF) &&
-		!(state->dst_type == DST_TYPE_IS_ATSC))
-
-		retval = read_dst(state, state->rx_tuna, 10);
-	else
-		retval = read_dst(state, &state->rx_tuna[2], FIXED_COMM);
-	if (retval < 0) {
-		dprintk(verbose, DST_DEBUG, 1, "read not successful");
-		return retval;
-	}
-	if ((state->type_flags & DST_TYPE_HAS_VLF) &&
-	   !(state->dst_type == DST_TYPE_IS_ATSC)) {
-
-		if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[0], 9)) {
-			dprintk(verbose, DST_INFO, 1, "checksum failure ? ");
-			return -EIO;
-		}
-	} else {
-		if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[2], 7)) {
-			dprintk(verbose, DST_INFO, 1, "checksum failure? ");
-			return -EIO;
-		}
-	}
-	if (state->rx_tuna[2] == 0 && state->rx_tuna[3] == 0)
-		return 0;
-	if (state->dst_type == DST_TYPE_IS_SAT) {
-		state->decode_freq = ((state->rx_tuna[2] & 0x7f) << 8) + state->rx_tuna[3];
-	} else {
-		state->decode_freq = ((state->rx_tuna[2] & 0x7f) << 16) + (state->rx_tuna[3] << 8) + state->rx_tuna[4];
-	}
-	state->decode_freq = state->decode_freq * 1000;
-	state->decode_lock = 1;
-	state->diseq_flags |= HAS_LOCK;
-
-	return 1;
-}
-
-static int dst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage);
-
-static int dst_write_tuna(struct dvb_frontend *fe)
-{
-	struct dst_state *state = fe->demodulator_priv;
-	int retval;
-	u8 reply;
-
-	dprintk(verbose, DST_INFO, 1, "type_flags 0x%x ", state->type_flags);
-	state->decode_freq = 0;
-	state->decode_lock = state->decode_strength = state->decode_snr = 0;
-	if (state->dst_type == DST_TYPE_IS_SAT) {
-		if (!(state->diseq_flags & HAS_POWER))
-			dst_set_voltage(fe, SEC_VOLTAGE_13);
-	}
-	state->diseq_flags &= ~(HAS_LOCK | ATTEMPT_TUNE);
-	mutex_lock(&state->dst_mutex);
-	if ((dst_comm_init(state)) < 0) {
-		dprintk(verbose, DST_DEBUG, 1, "DST Communication initialization failed.");
-		goto error;
-	}
-//	if (state->type_flags & DST_TYPE_HAS_NEWTUNE) {
-	if ((state->type_flags & DST_TYPE_HAS_VLF) &&
-		(!(state->dst_type == DST_TYPE_IS_ATSC))) {
-
-		state->tx_tuna[9] = dst_check_sum(&state->tx_tuna[0], 9);
-		retval = write_dst(state, &state->tx_tuna[0], 10);
-	} else {
-		state->tx_tuna[9] = dst_check_sum(&state->tx_tuna[2], 7);
-		retval = write_dst(state, &state->tx_tuna[2], FIXED_COMM);
-	}
-	if (retval < 0) {
-		dst_pio_disable(state);
-		dprintk(verbose, DST_DEBUG, 1, "write not successful");
-		goto werr;
-	}
-	if ((dst_pio_disable(state)) < 0) {
-		dprintk(verbose, DST_DEBUG, 1, "DST PIO disable failed !");
-		goto error;
-	}
-	if ((read_dst(state, &reply, GET_ACK) < 0)) {
-		dprintk(verbose, DST_DEBUG, 1, "read verify not successful.");
-		goto error;
-	}
-	if (reply != ACK) {
-		dprintk(verbose, DST_DEBUG, 1, "write not acknowledged 0x%02x ", reply);
-		goto error;
-	}
-	state->diseq_flags |= ATTEMPT_TUNE;
-	retval = dst_get_tuna(state);
-werr:
-	mutex_unlock(&state->dst_mutex);
-	return retval;
-
-error:
-	mutex_unlock(&state->dst_mutex);
-	return -EIO;
-}
-
-/*
- * line22k0    0x00, 0x09, 0x00, 0xff, 0x01, 0x00, 0x00, 0x00
- * line22k1    0x00, 0x09, 0x01, 0xff, 0x01, 0x00, 0x00, 0x00
- * line22k2    0x00, 0x09, 0x02, 0xff, 0x01, 0x00, 0x00, 0x00
- * tone        0x00, 0x09, 0xff, 0x00, 0x01, 0x00, 0x00, 0x00
- * data        0x00, 0x09, 0xff, 0x01, 0x01, 0x00, 0x00, 0x00
- * power_off   0x00, 0x09, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00
- * power_on    0x00, 0x09, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00
- * Diseqc 1    0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec
- * Diseqc 2    0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf4, 0xe8
- * Diseqc 3    0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf8, 0xe4
- * Diseqc 4    0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xfc, 0xe0
- */
-
-static int dst_set_diseqc(struct dvb_frontend *fe, struct dvb_diseqc_master_cmd *cmd)
-{
-	struct dst_state *state = fe->demodulator_priv;
-	u8 paket[8] = { 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec };
-
-	if (state->dst_type != DST_TYPE_IS_SAT)
-		return -EOPNOTSUPP;
-	if (cmd->msg_len > 0 && cmd->msg_len < 5)
-		memcpy(&paket[3], cmd->msg, cmd->msg_len);
-	else if (cmd->msg_len == 5 && state->dst_hw_cap & DST_TYPE_HAS_DISEQC5)
-		memcpy(&paket[2], cmd->msg, cmd->msg_len);
-	else
-		return -EINVAL;
-	paket[7] = dst_check_sum(&paket[0], 7);
-	return dst_command(state, paket, 8);
-}
-
-static int dst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-{
-	int need_cmd, retval = 0;
-	struct dst_state *state = fe->demodulator_priv;
-
-	state->voltage = voltage;
-	if (state->dst_type != DST_TYPE_IS_SAT)
-		return -EOPNOTSUPP;
-
-	need_cmd = 0;
-
-	switch (voltage) {
-	case SEC_VOLTAGE_13:
-	case SEC_VOLTAGE_18:
-		if ((state->diseq_flags & HAS_POWER) == 0)
-			need_cmd = 1;
-		state->diseq_flags |= HAS_POWER;
-		state->tx_tuna[4] = 0x01;
-		break;
-	case SEC_VOLTAGE_OFF:
-		need_cmd = 1;
-		state->diseq_flags &= ~(HAS_POWER | HAS_LOCK | ATTEMPT_TUNE);
-		state->tx_tuna[4] = 0x00;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (need_cmd)
-		retval = dst_tone_power_cmd(state);
-
-	return retval;
-}
-
-static int dst_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
-{
-	struct dst_state *state = fe->demodulator_priv;
-
-	state->tone = tone;
-	if (state->dst_type != DST_TYPE_IS_SAT)
-		return -EOPNOTSUPP;
-
-	switch (tone) {
-	case SEC_TONE_OFF:
-		if (state->type_flags & DST_TYPE_HAS_OBS_REGS)
-		    state->tx_tuna[2] = 0x00;
-		else
-		    state->tx_tuna[2] = 0xff;
-		break;
-
-	case SEC_TONE_ON:
-		state->tx_tuna[2] = 0x02;
-		break;
-	default:
-		return -EINVAL;
-	}
-	return dst_tone_power_cmd(state);
-}
-
-static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd)
-{
-	struct dst_state *state = fe->demodulator_priv;
-
-	if (state->dst_type != DST_TYPE_IS_SAT)
-		return -EOPNOTSUPP;
-	state->minicmd = minicmd;
-	switch (minicmd) {
-	case SEC_MINI_A:
-		state->tx_tuna[3] = 0x02;
-		break;
-	case SEC_MINI_B:
-		state->tx_tuna[3] = 0xff;
-		break;
-	}
-	return dst_tone_power_cmd(state);
-}
-
-
-static int dst_init(struct dvb_frontend *fe)
-{
-	struct dst_state *state = fe->demodulator_priv;
-
-	static u8 sat_tuna_188[] = { 0x09, 0x00, 0x03, 0xb6, 0x01, 0x00, 0x73, 0x21, 0x00, 0x00 };
-	static u8 sat_tuna_204[] = { 0x00, 0x00, 0x03, 0xb6, 0x01, 0x55, 0xbd, 0x50, 0x00, 0x00 };
-	static u8 ter_tuna_188[] = { 0x09, 0x00, 0x03, 0xb6, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00 };
-	static u8 ter_tuna_204[] = { 0x00, 0x00, 0x03, 0xb6, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00 };
-	static u8 cab_tuna_188[] = { 0x09, 0x00, 0x03, 0xb6, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00 };
-	static u8 cab_tuna_204[] = { 0x00, 0x00, 0x03, 0xb6, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00 };
-	static u8 atsc_tuner[] = { 0x00, 0x00, 0x03, 0xb6, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00 };
-
-	state->inversion = INVERSION_OFF;
-	state->voltage = SEC_VOLTAGE_13;
-	state->tone = SEC_TONE_OFF;
-	state->diseq_flags = 0;
-	state->k22 = 0x02;
-	state->bandwidth = 7000000;
-	state->cur_jiff = jiffies;
-	if (state->dst_type == DST_TYPE_IS_SAT)
-		memcpy(state->tx_tuna, ((state->type_flags & DST_TYPE_HAS_VLF) ? sat_tuna_188 : sat_tuna_204), sizeof (sat_tuna_204));
-	else if (state->dst_type == DST_TYPE_IS_TERR)
-		memcpy(state->tx_tuna, ((state->type_flags & DST_TYPE_HAS_VLF) ? ter_tuna_188 : ter_tuna_204), sizeof (ter_tuna_204));
-	else if (state->dst_type == DST_TYPE_IS_CABLE)
-		memcpy(state->tx_tuna, ((state->type_flags & DST_TYPE_HAS_VLF) ? cab_tuna_188 : cab_tuna_204), sizeof (cab_tuna_204));
-	else if (state->dst_type == DST_TYPE_IS_ATSC)
-		memcpy(state->tx_tuna, atsc_tuner, sizeof (atsc_tuner));
-
-	return 0;
-}
-
-static int dst_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct dst_state *state = fe->demodulator_priv;
-
-	*status = 0;
-	if (state->diseq_flags & HAS_LOCK) {
-//		dst_get_signal(state);	// don't require(?) to ask MCU
-		if (state->decode_lock)
-			*status |= FE_HAS_LOCK | FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_SYNC | FE_HAS_VITERBI;
-	}
-
-	return 0;
-}
-
-static int dst_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	struct dst_state *state = fe->demodulator_priv;
-
-	int retval = dst_get_signal(state);
-	*strength = state->decode_strength;
-
-	return retval;
-}
-
-static int dst_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct dst_state *state = fe->demodulator_priv;
-
-	int retval = dst_get_signal(state);
-	*snr = state->decode_snr;
-
-	return retval;
-}
-
-static int dst_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	int retval = -EINVAL;
-	struct dst_state *state = fe->demodulator_priv;
-
-	if (p != NULL) {
-		retval = dst_set_freq(state, p->frequency);
-		if(retval != 0)
-			return retval;
-		dprintk(verbose, DST_DEBUG, 1, "Set Frequency=[%d]", p->frequency);
-
-		if (state->dst_type == DST_TYPE_IS_SAT) {
-			if (state->type_flags & DST_TYPE_HAS_OBS_REGS)
-				dst_set_inversion(state, p->inversion);
-			dst_set_fec(state, p->fec_inner);
-			dst_set_symbolrate(state, p->symbol_rate);
-			dst_set_polarization(state);
-			dprintk(verbose, DST_DEBUG, 1, "Set Symbolrate=[%d]", p->symbol_rate);
-
-		} else if (state->dst_type == DST_TYPE_IS_TERR)
-			dst_set_bandwidth(state, p->bandwidth_hz);
-		else if (state->dst_type == DST_TYPE_IS_CABLE) {
-			dst_set_fec(state, p->fec_inner);
-			dst_set_symbolrate(state, p->symbol_rate);
-			dst_set_modulation(state, p->modulation);
-		}
-		retval = dst_write_tuna(fe);
-	}
-
-	return retval;
-}
-
-static int dst_tune_frontend(struct dvb_frontend* fe,
-			    bool re_tune,
-			    unsigned int mode_flags,
-			    unsigned int *delay,
-			    fe_status_t *status)
-{
-	struct dst_state *state = fe->demodulator_priv;
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-
-	if (re_tune) {
-		dst_set_freq(state, p->frequency);
-		dprintk(verbose, DST_DEBUG, 1, "Set Frequency=[%d]", p->frequency);
-
-		if (state->dst_type == DST_TYPE_IS_SAT) {
-			if (state->type_flags & DST_TYPE_HAS_OBS_REGS)
-				dst_set_inversion(state, p->inversion);
-			dst_set_fec(state, p->fec_inner);
-			dst_set_symbolrate(state, p->symbol_rate);
-			dst_set_polarization(state);
-			dprintk(verbose, DST_DEBUG, 1, "Set Symbolrate=[%d]", p->symbol_rate);
-
-		} else if (state->dst_type == DST_TYPE_IS_TERR)
-			dst_set_bandwidth(state, p->bandwidth_hz);
-		else if (state->dst_type == DST_TYPE_IS_CABLE) {
-			dst_set_fec(state, p->fec_inner);
-			dst_set_symbolrate(state, p->symbol_rate);
-			dst_set_modulation(state, p->modulation);
-		}
-		dst_write_tuna(fe);
-	}
-
-	if (!(mode_flags & FE_TUNE_MODE_ONESHOT))
-		dst_read_status(fe, status);
-
-	*delay = HZ/10;
-	return 0;
-}
-
-static int dst_get_tuning_algo(struct dvb_frontend *fe)
-{
-	return dst_algo ? DVBFE_ALGO_HW : DVBFE_ALGO_SW;
-}
-
-static int dst_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct dst_state *state = fe->demodulator_priv;
-
-	p->frequency = state->decode_freq;
-	if (state->dst_type == DST_TYPE_IS_SAT) {
-		if (state->type_flags & DST_TYPE_HAS_OBS_REGS)
-			p->inversion = state->inversion;
-		p->symbol_rate = state->symbol_rate;
-		p->fec_inner = dst_get_fec(state);
-	} else if (state->dst_type == DST_TYPE_IS_TERR) {
-		p->bandwidth_hz = state->bandwidth;
-	} else if (state->dst_type == DST_TYPE_IS_CABLE) {
-		p->symbol_rate = state->symbol_rate;
-		p->fec_inner = dst_get_fec(state);
-		p->modulation = dst_get_modulation(state);
-	}
-
-	return 0;
-}
-
-static void dst_release(struct dvb_frontend *fe)
-{
-	struct dst_state *state = fe->demodulator_priv;
-	if (state->dst_ca) {
-		dvb_unregister_device(state->dst_ca);
-#ifdef CONFIG_MEDIA_ATTACH
-		symbol_put(dst_ca_attach);
-#endif
-	}
-	kfree(state);
-}
-
-static struct dvb_frontend_ops dst_dvbt_ops;
-static struct dvb_frontend_ops dst_dvbs_ops;
-static struct dvb_frontend_ops dst_dvbc_ops;
-static struct dvb_frontend_ops dst_atsc_ops;
-
-struct dst_state *dst_attach(struct dst_state *state, struct dvb_adapter *dvb_adapter)
-{
-	/* check if the ASIC is there */
-	if (dst_probe(state) < 0) {
-		kfree(state);
-		return NULL;
-	}
-	/* determine settings based on type */
-	/* create dvb_frontend */
-	switch (state->dst_type) {
-	case DST_TYPE_IS_TERR:
-		memcpy(&state->frontend.ops, &dst_dvbt_ops, sizeof(struct dvb_frontend_ops));
-		break;
-	case DST_TYPE_IS_CABLE:
-		memcpy(&state->frontend.ops, &dst_dvbc_ops, sizeof(struct dvb_frontend_ops));
-		break;
-	case DST_TYPE_IS_SAT:
-		memcpy(&state->frontend.ops, &dst_dvbs_ops, sizeof(struct dvb_frontend_ops));
-		break;
-	case DST_TYPE_IS_ATSC:
-		memcpy(&state->frontend.ops, &dst_atsc_ops, sizeof(struct dvb_frontend_ops));
-		break;
-	default:
-		dprintk(verbose, DST_ERROR, 1, "unknown DST type. please report to the LinuxTV.org DVB mailinglist.");
-		kfree(state);
-		return NULL;
-	}
-	state->frontend.demodulator_priv = state;
-
-	return state;				/*	Manu (DST is a card not a frontend)	*/
-}
-
-EXPORT_SYMBOL(dst_attach);
-
-static struct dvb_frontend_ops dst_dvbt_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name = "DST DVB-T",
-		.frequency_min = 137000000,
-		.frequency_max = 858000000,
-		.frequency_stepsize = 166667,
-		.caps = FE_CAN_FEC_AUTO			|
-			FE_CAN_QAM_AUTO			|
-			FE_CAN_QAM_16			|
-			FE_CAN_QAM_32			|
-			FE_CAN_QAM_64			|
-			FE_CAN_QAM_128			|
-			FE_CAN_QAM_256			|
-			FE_CAN_TRANSMISSION_MODE_AUTO	|
-			FE_CAN_GUARD_INTERVAL_AUTO
-	},
-
-	.release = dst_release,
-	.init = dst_init,
-	.tune = dst_tune_frontend,
-	.set_frontend = dst_set_frontend,
-	.get_frontend = dst_get_frontend,
-	.get_frontend_algo = dst_get_tuning_algo,
-	.read_status = dst_read_status,
-	.read_signal_strength = dst_read_signal_strength,
-	.read_snr = dst_read_snr,
-};
-
-static struct dvb_frontend_ops dst_dvbs_ops = {
-	.delsys = { SYS_DVBS },
-	.info = {
-		.name = "DST DVB-S",
-		.frequency_min = 950000,
-		.frequency_max = 2150000,
-		.frequency_stepsize = 1000,	/* kHz for QPSK frontends */
-		.frequency_tolerance = 29500,
-		.symbol_rate_min = 1000000,
-		.symbol_rate_max = 45000000,
-	/*     . symbol_rate_tolerance	=	???,*/
-		.caps = FE_CAN_FEC_AUTO | FE_CAN_QPSK
-	},
-
-	.release = dst_release,
-	.init = dst_init,
-	.tune = dst_tune_frontend,
-	.set_frontend = dst_set_frontend,
-	.get_frontend = dst_get_frontend,
-	.get_frontend_algo = dst_get_tuning_algo,
-	.read_status = dst_read_status,
-	.read_signal_strength = dst_read_signal_strength,
-	.read_snr = dst_read_snr,
-	.diseqc_send_burst = dst_send_burst,
-	.diseqc_send_master_cmd = dst_set_diseqc,
-	.set_voltage = dst_set_voltage,
-	.set_tone = dst_set_tone,
-};
-
-static struct dvb_frontend_ops dst_dvbc_ops = {
-	.delsys = { SYS_DVBC_ANNEX_A },
-	.info = {
-		.name = "DST DVB-C",
-		.frequency_stepsize = 62500,
-		.frequency_min = 51000000,
-		.frequency_max = 858000000,
-		.symbol_rate_min = 1000000,
-		.symbol_rate_max = 45000000,
-		.caps = FE_CAN_FEC_AUTO |
-			FE_CAN_QAM_AUTO |
-			FE_CAN_QAM_16	|
-			FE_CAN_QAM_32	|
-			FE_CAN_QAM_64	|
-			FE_CAN_QAM_128	|
-			FE_CAN_QAM_256
-	},
-
-	.release = dst_release,
-	.init = dst_init,
-	.tune = dst_tune_frontend,
-	.set_frontend = dst_set_frontend,
-	.get_frontend = dst_get_frontend,
-	.get_frontend_algo = dst_get_tuning_algo,
-	.read_status = dst_read_status,
-	.read_signal_strength = dst_read_signal_strength,
-	.read_snr = dst_read_snr,
-};
-
-static struct dvb_frontend_ops dst_atsc_ops = {
-	.delsys = { SYS_ATSC },
-	.info = {
-		.name = "DST ATSC",
-		.frequency_stepsize = 62500,
-		.frequency_min = 510000000,
-		.frequency_max = 858000000,
-		.symbol_rate_min = 1000000,
-		.symbol_rate_max = 45000000,
-		.caps = FE_CAN_FEC_AUTO | FE_CAN_QAM_AUTO | FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
-	},
-
-	.release = dst_release,
-	.init = dst_init,
-	.tune = dst_tune_frontend,
-	.set_frontend = dst_set_frontend,
-	.get_frontend = dst_get_frontend,
-	.get_frontend_algo = dst_get_tuning_algo,
-	.read_status = dst_read_status,
-	.read_signal_strength = dst_read_signal_strength,
-	.read_snr = dst_read_snr,
-};
-
-MODULE_DESCRIPTION("DST DVB-S/T/C/ATSC Combo Frontend driver");
-MODULE_AUTHOR("Jamie Honan, Manu Abraham");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/bt8xx/dst_ca.c b/drivers/media/dvb/bt8xx/dst_ca.c
deleted file mode 100644
index 66f52f1..0000000
--- a/drivers/media/dvb/bt8xx/dst_ca.c
+++ /dev/null
@@ -1,725 +0,0 @@
-/*
-	CA-driver for TwinHan DST Frontend/Card
-
-	Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/string.h>
-#include <linux/dvb/ca.h>
-#include "dvbdev.h"
-#include "dvb_frontend.h"
-#include "dst_ca.h"
-#include "dst_common.h"
-
-#define DST_CA_ERROR		0
-#define DST_CA_NOTICE		1
-#define DST_CA_INFO		2
-#define DST_CA_DEBUG		3
-
-#define dprintk(x, y, z, format, arg...) do {						\
-	if (z) {									\
-		if	((x > DST_CA_ERROR) && (x > y))					\
-			printk(KERN_ERR "%s: " format "\n", __func__ , ##arg);	\
-		else if	((x > DST_CA_NOTICE) && (x > y))				\
-			printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg);	\
-		else if ((x > DST_CA_INFO) && (x > y))					\
-			printk(KERN_INFO "%s: " format "\n", __func__ , ##arg);	\
-		else if ((x > DST_CA_DEBUG) && (x > y))					\
-			printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg);	\
-	} else {									\
-		if (x > y)								\
-			printk(format, ## arg);						\
-	}										\
-} while(0)
-
-
-static DEFINE_MUTEX(dst_ca_mutex);
-static unsigned int verbose = 5;
-module_param(verbose, int, 0644);
-MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
-
-/*	Need some more work	*/
-static int ca_set_slot_descr(void)
-{
-	/*	We could make this more graceful ?	*/
-	return -EOPNOTSUPP;
-}
-
-/*	Need some more work	*/
-static int ca_set_pid(void)
-{
-	/*	We could make this more graceful ?	*/
-	return -EOPNOTSUPP;
-}
-
-static void put_command_and_length(u8 *data, int command, int length)
-{
-	data[0] = (command >> 16) & 0xff;
-	data[1] = (command >> 8) & 0xff;
-	data[2] = command & 0xff;
-	data[3] = length;
-}
-
-static void put_checksum(u8 *check_string, int length)
-{
-	dprintk(verbose, DST_CA_DEBUG, 1, " Computing string checksum.");
-	dprintk(verbose, DST_CA_DEBUG, 1, "  -> string length : 0x%02x", length);
-	check_string[length] = dst_check_sum (check_string, length);
-	dprintk(verbose, DST_CA_DEBUG, 1, "  -> checksum      : 0x%02x", check_string[length]);
-}
-
-static int dst_ci_command(struct dst_state* state, u8 * data, u8 *ca_string, u8 len, int read)
-{
-	u8 reply;
-
-	mutex_lock(&state->dst_mutex);
-	dst_comm_init(state);
-	msleep(65);
-
-	if (write_dst(state, data, len)) {
-		dprintk(verbose, DST_CA_INFO, 1, " Write not successful, trying to recover");
-		dst_error_recovery(state);
-		goto error;
-	}
-	if ((dst_pio_disable(state)) < 0) {
-		dprintk(verbose, DST_CA_ERROR, 1, " DST PIO disable failed.");
-		goto error;
-	}
-	if (read_dst(state, &reply, GET_ACK) < 0) {
-		dprintk(verbose, DST_CA_INFO, 1, " Read not successful, trying to recover");
-		dst_error_recovery(state);
-		goto error;
-	}
-	if (read) {
-		if (! dst_wait_dst_ready(state, LONG_DELAY)) {
-			dprintk(verbose, DST_CA_NOTICE, 1, " 8820 not ready");
-			goto error;
-		}
-		if (read_dst(state, ca_string, 128) < 0) {	/*	Try to make this dynamic	*/
-			dprintk(verbose, DST_CA_INFO, 1, " Read not successful, trying to recover");
-			dst_error_recovery(state);
-			goto error;
-		}
-	}
-	mutex_unlock(&state->dst_mutex);
-	return 0;
-
-error:
-	mutex_unlock(&state->dst_mutex);
-	return -EIO;
-}
-
-
-static int dst_put_ci(struct dst_state *state, u8 *data, int len, u8 *ca_string, int read)
-{
-	u8 dst_ca_comm_err = 0;
-
-	while (dst_ca_comm_err < RETRIES) {
-		dprintk(verbose, DST_CA_NOTICE, 1, " Put Command");
-		if (dst_ci_command(state, data, ca_string, len, read)) {	// If error
-			dst_error_recovery(state);
-			dst_ca_comm_err++; // work required here.
-		} else {
-			break;
-		}
-	}
-
-	if(dst_ca_comm_err == RETRIES)
-		return -1;
-
-	return 0;
-}
-
-
-
-static int ca_get_app_info(struct dst_state *state)
-{
-	int length, str_length;
-	static u8 command[8] = {0x07, 0x40, 0x01, 0x00, 0x01, 0x00, 0x00, 0xff};
-
-	put_checksum(&command[0], command[0]);
-	if ((dst_put_ci(state, command, sizeof(command), state->messages, GET_REPLY)) < 0) {
-		dprintk(verbose, DST_CA_ERROR, 1, " -->dst_put_ci FAILED !");
-		return -1;
-	}
-	dprintk(verbose, DST_CA_INFO, 1, " -->dst_put_ci SUCCESS !");
-	dprintk(verbose, DST_CA_INFO, 1, " ================================ CI Module Application Info ======================================");
-	dprintk(verbose, DST_CA_INFO, 1, " Application Type=[%d], Application Vendor=[%d], Vendor Code=[%d]\n%s: Application info=[%s]",
-		state->messages[7], (state->messages[8] << 8) | state->messages[9],
-		(state->messages[10] << 8) | state->messages[11], __func__, (char *)(&state->messages[12]));
-	dprintk(verbose, DST_CA_INFO, 1, " ==================================================================================================");
-
-	// Transform dst message to correct application_info message
-	length = state->messages[5];
-	str_length = length - 6;
-	if (str_length < 0) {
-		str_length = 0;
-		dprintk(verbose, DST_CA_ERROR, 1, "Invalid string length returned in ca_get_app_info(). Recovering.");
-	}
-
-	// First, the command and length fields
-	put_command_and_length(&state->messages[0], CA_APP_INFO, length);
-
-	// Copy application_type, application_manufacturer and manufacturer_code
-	memcpy(&state->messages[4], &state->messages[7], 5);
-
-	// Set string length and copy string
-	state->messages[9] = str_length;
-	memcpy(&state->messages[10], &state->messages[12], str_length);
-
-	return 0;
-}
-
-static int ca_get_ca_info(struct dst_state *state)
-{
-	int srcPtr, dstPtr, i, num_ids;
-	static u8 slot_command[8] = {0x07, 0x40, 0x00, 0x00, 0x02, 0x00, 0x00, 0xff};
-	const int in_system_id_pos = 8, out_system_id_pos = 4, in_num_ids_pos = 7;
-
-	put_checksum(&slot_command[0], slot_command[0]);
-	if ((dst_put_ci(state, slot_command, sizeof (slot_command), state->messages, GET_REPLY)) < 0) {
-		dprintk(verbose, DST_CA_ERROR, 1, " -->dst_put_ci FAILED !");
-		return -1;
-	}
-	dprintk(verbose, DST_CA_INFO, 1, " -->dst_put_ci SUCCESS !");
-
-	// Print raw data
-	dprintk(verbose, DST_CA_INFO, 0, " DST data = [");
-	for (i = 0; i < state->messages[0] + 1; i++) {
-		dprintk(verbose, DST_CA_INFO, 0, " 0x%02x", state->messages[i]);
-	}
-	dprintk(verbose, DST_CA_INFO, 0, "]\n");
-
-	// Set the command and length of the output
-	num_ids = state->messages[in_num_ids_pos];
-	if (num_ids >= 100) {
-		num_ids = 100;
-		dprintk(verbose, DST_CA_ERROR, 1, "Invalid number of ids (>100). Recovering.");
-	}
-	put_command_and_length(&state->messages[0], CA_INFO, num_ids * 2);
-
-	dprintk(verbose, DST_CA_INFO, 0, " CA_INFO = [");
-	srcPtr = in_system_id_pos;
-	dstPtr = out_system_id_pos;
-	for(i = 0; i < num_ids; i++) {
-		dprintk(verbose, DST_CA_INFO, 0, " 0x%02x%02x", state->messages[srcPtr + 0], state->messages[srcPtr + 1]);
-		// Append to output
-		state->messages[dstPtr + 0] = state->messages[srcPtr + 0];
-		state->messages[dstPtr + 1] = state->messages[srcPtr + 1];
-		srcPtr += 2;
-		dstPtr += 2;
-	}
-	dprintk(verbose, DST_CA_INFO, 0, "]\n");
-
-	return 0;
-}
-
-static int ca_get_slot_caps(struct dst_state *state, struct ca_caps *p_ca_caps, void __user *arg)
-{
-	int i;
-	u8 slot_cap[256];
-	static u8 slot_command[8] = {0x07, 0x40, 0x02, 0x00, 0x02, 0x00, 0x00, 0xff};
-
-	put_checksum(&slot_command[0], slot_command[0]);
-	if ((dst_put_ci(state, slot_command, sizeof (slot_command), slot_cap, GET_REPLY)) < 0) {
-		dprintk(verbose, DST_CA_ERROR, 1, " -->dst_put_ci FAILED !");
-		return -1;
-	}
-	dprintk(verbose, DST_CA_NOTICE, 1, " -->dst_put_ci SUCCESS !");
-
-	/*	Will implement the rest soon		*/
-
-	dprintk(verbose, DST_CA_INFO, 1, " Slot cap = [%d]", slot_cap[7]);
-	dprintk(verbose, DST_CA_INFO, 0, "===================================\n");
-	for (i = 0; i < slot_cap[0] + 1; i++)
-		dprintk(verbose, DST_CA_INFO, 0, " %d", slot_cap[i]);
-	dprintk(verbose, DST_CA_INFO, 0, "\n");
-
-	p_ca_caps->slot_num = 1;
-	p_ca_caps->slot_type = 1;
-	p_ca_caps->descr_num = slot_cap[7];
-	p_ca_caps->descr_type = 1;
-
-	if (copy_to_user(arg, p_ca_caps, sizeof (struct ca_caps)))
-		return -EFAULT;
-
-	return 0;
-}
-
-/*	Need some more work	*/
-static int ca_get_slot_descr(struct dst_state *state, struct ca_msg *p_ca_message, void __user *arg)
-{
-	return -EOPNOTSUPP;
-}
-
-
-static int ca_get_slot_info(struct dst_state *state, struct ca_slot_info *p_ca_slot_info, void __user *arg)
-{
-	int i;
-	static u8 slot_command[8] = {0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff};
-
-	u8 *slot_info = state->messages;
-
-	put_checksum(&slot_command[0], 7);
-	if ((dst_put_ci(state, slot_command, sizeof (slot_command), slot_info, GET_REPLY)) < 0) {
-		dprintk(verbose, DST_CA_ERROR, 1, " -->dst_put_ci FAILED !");
-		return -1;
-	}
-	dprintk(verbose, DST_CA_INFO, 1, " -->dst_put_ci SUCCESS !");
-
-	/*	Will implement the rest soon		*/
-
-	dprintk(verbose, DST_CA_INFO, 1, " Slot info = [%d]", slot_info[3]);
-	dprintk(verbose, DST_CA_INFO, 0, "===================================\n");
-	for (i = 0; i < 8; i++)
-		dprintk(verbose, DST_CA_INFO, 0, " %d", slot_info[i]);
-	dprintk(verbose, DST_CA_INFO, 0, "\n");
-
-	if (slot_info[4] & 0x80) {
-		p_ca_slot_info->flags = CA_CI_MODULE_PRESENT;
-		p_ca_slot_info->num = 1;
-		p_ca_slot_info->type = CA_CI;
-	} else if (slot_info[4] & 0x40) {
-		p_ca_slot_info->flags = CA_CI_MODULE_READY;
-		p_ca_slot_info->num = 1;
-		p_ca_slot_info->type = CA_CI;
-	} else
-		p_ca_slot_info->flags = 0;
-
-	if (copy_to_user(arg, p_ca_slot_info, sizeof (struct ca_slot_info)))
-		return -EFAULT;
-
-	return 0;
-}
-
-
-static int ca_get_message(struct dst_state *state, struct ca_msg *p_ca_message, void __user *arg)
-{
-	u8 i = 0;
-	u32 command = 0;
-
-	if (copy_from_user(p_ca_message, arg, sizeof (struct ca_msg)))
-		return -EFAULT;
-
-	if (p_ca_message->msg) {
-		dprintk(verbose, DST_CA_NOTICE, 1, " Message = [%02x %02x %02x]", p_ca_message->msg[0], p_ca_message->msg[1], p_ca_message->msg[2]);
-
-		for (i = 0; i < 3; i++) {
-			command = command | p_ca_message->msg[i];
-			if (i < 2)
-				command = command << 8;
-		}
-		dprintk(verbose, DST_CA_NOTICE, 1, " Command=[0x%x]", command);
-
-		switch (command) {
-		case CA_APP_INFO:
-			memcpy(p_ca_message->msg, state->messages, 128);
-			if (copy_to_user(arg, p_ca_message, sizeof (struct ca_msg)) )
-				return -EFAULT;
-			break;
-		case CA_INFO:
-			memcpy(p_ca_message->msg, state->messages, 128);
-			if (copy_to_user(arg, p_ca_message, sizeof (struct ca_msg)) )
-				return -EFAULT;
-			break;
-		}
-	}
-
-	return 0;
-}
-
-static int handle_dst_tag(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer, u32 length)
-{
-	if (state->dst_hw_cap & DST_TYPE_HAS_SESSION) {
-		hw_buffer->msg[2] = p_ca_message->msg[1];	/*	MSB	*/
-		hw_buffer->msg[3] = p_ca_message->msg[2];	/*	LSB	*/
-	} else {
-		if (length > 247) {
-			dprintk(verbose, DST_CA_ERROR, 1, " Message too long ! *** Bailing Out *** !");
-			return -1;
-		}
-		hw_buffer->msg[0] = (length & 0xff) + 7;
-		hw_buffer->msg[1] = 0x40;
-		hw_buffer->msg[2] = 0x03;
-		hw_buffer->msg[3] = 0x00;
-		hw_buffer->msg[4] = 0x03;
-		hw_buffer->msg[5] = length & 0xff;
-		hw_buffer->msg[6] = 0x00;
-
-		/*
-		 *	Need to compute length for EN50221 section 8.3.2, for the time being
-		 *	assuming 8.3.2 is not applicable
-		 */
-		memcpy(&hw_buffer->msg[7], &p_ca_message->msg[4], length);
-	}
-
-	return 0;
-}
-
-static int write_to_8820(struct dst_state *state, struct ca_msg *hw_buffer, u8 length, u8 reply)
-{
-	if ((dst_put_ci(state, hw_buffer->msg, length, hw_buffer->msg, reply)) < 0) {
-		dprintk(verbose, DST_CA_ERROR, 1, " DST-CI Command failed.");
-		dprintk(verbose, DST_CA_NOTICE, 1, " Resetting DST.");
-		rdc_reset_state(state);
-		return -1;
-	}
-	dprintk(verbose, DST_CA_NOTICE, 1, " DST-CI Command success.");
-
-	return 0;
-}
-
-static u32 asn_1_decode(u8 *asn_1_array)
-{
-	u8 length_field = 0, word_count = 0, count = 0;
-	u32 length = 0;
-
-	length_field = asn_1_array[0];
-	dprintk(verbose, DST_CA_DEBUG, 1, " Length field=[%02x]", length_field);
-	if (length_field < 0x80) {
-		length = length_field & 0x7f;
-		dprintk(verbose, DST_CA_DEBUG, 1, " Length=[%02x]\n", length);
-	} else {
-		word_count = length_field & 0x7f;
-		for (count = 0; count < word_count; count++) {
-			length = length  << 8;
-			length += asn_1_array[count + 1];
-			dprintk(verbose, DST_CA_DEBUG, 1, " Length=[%04x]", length);
-		}
-	}
-	return length;
-}
-
-static int debug_string(u8 *msg, u32 length, u32 offset)
-{
-	u32 i;
-
-	dprintk(verbose, DST_CA_DEBUG, 0, " String=[ ");
-	for (i = offset; i < length; i++)
-		dprintk(verbose, DST_CA_DEBUG, 0, "%02x ", msg[i]);
-	dprintk(verbose, DST_CA_DEBUG, 0, "]\n");
-
-	return 0;
-}
-
-
-static int ca_set_pmt(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer, u8 reply, u8 query)
-{
-	u32 length = 0;
-	u8 tag_length = 8;
-
-	length = asn_1_decode(&p_ca_message->msg[3]);
-	dprintk(verbose, DST_CA_DEBUG, 1, " CA Message length=[%d]", length);
-	debug_string(&p_ca_message->msg[4], length, 0); /*	length is excluding tag & length	*/
-
-	memset(hw_buffer->msg, '\0', length);
-	handle_dst_tag(state, p_ca_message, hw_buffer, length);
-	put_checksum(hw_buffer->msg, hw_buffer->msg[0]);
-
-	debug_string(hw_buffer->msg, (length + tag_length), 0); /*	tags too	*/
-	write_to_8820(state, hw_buffer, (length + tag_length), reply);
-
-	return 0;
-}
-
-
-/*	Board supports CA PMT reply ?		*/
-static int dst_check_ca_pmt(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer)
-{
-	int ca_pmt_reply_test = 0;
-
-	/*	Do test board			*/
-	/*	Not there yet but soon		*/
-
-	/*	CA PMT Reply capable		*/
-	if (ca_pmt_reply_test) {
-		if ((ca_set_pmt(state, p_ca_message, hw_buffer, 1, GET_REPLY)) < 0) {
-			dprintk(verbose, DST_CA_ERROR, 1, " ca_set_pmt.. failed !");
-			return -1;
-		}
-
-	/*	Process CA PMT Reply		*/
-	/*	will implement soon		*/
-		dprintk(verbose, DST_CA_ERROR, 1, " Not there yet");
-	}
-	/*	CA PMT Reply not capable	*/
-	if (!ca_pmt_reply_test) {
-		if ((ca_set_pmt(state, p_ca_message, hw_buffer, 0, NO_REPLY)) < 0) {
-			dprintk(verbose, DST_CA_ERROR, 1, " ca_set_pmt.. failed !");
-			return -1;
-		}
-		dprintk(verbose, DST_CA_NOTICE, 1, " ca_set_pmt.. success !");
-	/*	put a dummy message		*/
-
-	}
-	return 0;
-}
-
-static int ca_send_message(struct dst_state *state, struct ca_msg *p_ca_message, void __user *arg)
-{
-	int i = 0;
-
-	u32 command = 0;
-	struct ca_msg *hw_buffer;
-	int result = 0;
-
-	if ((hw_buffer = kmalloc(sizeof (struct ca_msg), GFP_KERNEL)) == NULL) {
-		dprintk(verbose, DST_CA_ERROR, 1, " Memory allocation failure");
-		return -ENOMEM;
-	}
-	dprintk(verbose, DST_CA_DEBUG, 1, " ");
-
-	if (copy_from_user(p_ca_message, arg, sizeof (struct ca_msg))) {
-		result = -EFAULT;
-		goto free_mem_and_exit;
-	}
-
-
-	if (p_ca_message->msg) {
-		/*	EN50221 tag	*/
-		command = 0;
-
-		for (i = 0; i < 3; i++) {
-			command = command | p_ca_message->msg[i];
-			if (i < 2)
-				command = command << 8;
-		}
-		dprintk(verbose, DST_CA_DEBUG, 1, " Command=[0x%x]\n", command);
-
-		switch (command) {
-		case CA_PMT:
-			dprintk(verbose, DST_CA_DEBUG, 1, "Command = SEND_CA_PMT");
-			if ((ca_set_pmt(state, p_ca_message, hw_buffer, 0, 0)) < 0) {	// code simplification started
-				dprintk(verbose, DST_CA_ERROR, 1, " -->CA_PMT Failed !");
-				result = -1;
-				goto free_mem_and_exit;
-			}
-			dprintk(verbose, DST_CA_INFO, 1, " -->CA_PMT Success !");
-			break;
-		case CA_PMT_REPLY:
-			dprintk(verbose, DST_CA_INFO, 1, "Command = CA_PMT_REPLY");
-			/*      Have to handle the 2 basic types of cards here  */
-			if ((dst_check_ca_pmt(state, p_ca_message, hw_buffer)) < 0) {
-				dprintk(verbose, DST_CA_ERROR, 1, " -->CA_PMT_REPLY Failed !");
-				result = -1;
-				goto free_mem_and_exit;
-			}
-			dprintk(verbose, DST_CA_INFO, 1, " -->CA_PMT_REPLY Success !");
-			break;
-		case CA_APP_INFO_ENQUIRY:		// only for debugging
-			dprintk(verbose, DST_CA_INFO, 1, " Getting Cam Application information");
-
-			if ((ca_get_app_info(state)) < 0) {
-				dprintk(verbose, DST_CA_ERROR, 1, " -->CA_APP_INFO_ENQUIRY Failed !");
-				result = -1;
-				goto free_mem_and_exit;
-			}
-			dprintk(verbose, DST_CA_INFO, 1, " -->CA_APP_INFO_ENQUIRY Success !");
-			break;
-		case CA_INFO_ENQUIRY:
-			dprintk(verbose, DST_CA_INFO, 1, " Getting CA Information");
-
-			if ((ca_get_ca_info(state)) < 0) {
-				dprintk(verbose, DST_CA_ERROR, 1, " -->CA_INFO_ENQUIRY Failed !");
-				result = -1;
-				goto free_mem_and_exit;
-			}
-			dprintk(verbose, DST_CA_INFO, 1, " -->CA_INFO_ENQUIRY Success !");
-			break;
-		}
-	}
-free_mem_and_exit:
-	kfree (hw_buffer);
-
-	return result;
-}
-
-static long dst_ca_ioctl(struct file *file, unsigned int cmd, unsigned long ioctl_arg)
-{
-	struct dvb_device *dvbdev;
-	struct dst_state *state;
-	struct ca_slot_info *p_ca_slot_info;
-	struct ca_caps *p_ca_caps;
-	struct ca_msg *p_ca_message;
-	void __user *arg = (void __user *)ioctl_arg;
-	int result = 0;
-
-	mutex_lock(&dst_ca_mutex);
-	dvbdev = file->private_data;
-	state = (struct dst_state *)dvbdev->priv;
-	p_ca_message = kmalloc(sizeof (struct ca_msg), GFP_KERNEL);
-	p_ca_slot_info = kmalloc(sizeof (struct ca_slot_info), GFP_KERNEL);
-	p_ca_caps = kmalloc(sizeof (struct ca_caps), GFP_KERNEL);
-	if (!p_ca_message || !p_ca_slot_info || !p_ca_caps) {
-		dprintk(verbose, DST_CA_ERROR, 1, " Memory allocation failure");
-		result = -ENOMEM;
-		goto free_mem_and_exit;
-	}
-
-	/*	We have now only the standard ioctl's, the driver is upposed to handle internals.	*/
-	switch (cmd) {
-	case CA_SEND_MSG:
-		dprintk(verbose, DST_CA_INFO, 1, " Sending message");
-		if ((ca_send_message(state, p_ca_message, arg)) < 0) {
-			dprintk(verbose, DST_CA_ERROR, 1, " -->CA_SEND_MSG Failed !");
-			result = -1;
-			goto free_mem_and_exit;
-		}
-		break;
-	case CA_GET_MSG:
-		dprintk(verbose, DST_CA_INFO, 1, " Getting message");
-		if ((ca_get_message(state, p_ca_message, arg)) < 0) {
-			dprintk(verbose, DST_CA_ERROR, 1, " -->CA_GET_MSG Failed !");
-			result = -1;
-			goto free_mem_and_exit;
-		}
-		dprintk(verbose, DST_CA_INFO, 1, " -->CA_GET_MSG Success !");
-		break;
-	case CA_RESET:
-		dprintk(verbose, DST_CA_ERROR, 1, " Resetting DST");
-		dst_error_bailout(state);
-		msleep(4000);
-		break;
-	case CA_GET_SLOT_INFO:
-		dprintk(verbose, DST_CA_INFO, 1, " Getting Slot info");
-		if ((ca_get_slot_info(state, p_ca_slot_info, arg)) < 0) {
-			dprintk(verbose, DST_CA_ERROR, 1, " -->CA_GET_SLOT_INFO Failed !");
-			result = -1;
-			goto free_mem_and_exit;
-		}
-		dprintk(verbose, DST_CA_INFO, 1, " -->CA_GET_SLOT_INFO Success !");
-		break;
-	case CA_GET_CAP:
-		dprintk(verbose, DST_CA_INFO, 1, " Getting Slot capabilities");
-		if ((ca_get_slot_caps(state, p_ca_caps, arg)) < 0) {
-			dprintk(verbose, DST_CA_ERROR, 1, " -->CA_GET_CAP Failed !");
-			result = -1;
-			goto free_mem_and_exit;
-		}
-		dprintk(verbose, DST_CA_INFO, 1, " -->CA_GET_CAP Success !");
-		break;
-	case CA_GET_DESCR_INFO:
-		dprintk(verbose, DST_CA_INFO, 1, " Getting descrambler description");
-		if ((ca_get_slot_descr(state, p_ca_message, arg)) < 0) {
-			dprintk(verbose, DST_CA_ERROR, 1, " -->CA_GET_DESCR_INFO Failed !");
-			result = -1;
-			goto free_mem_and_exit;
-		}
-		dprintk(verbose, DST_CA_INFO, 1, " -->CA_GET_DESCR_INFO Success !");
-		break;
-	case CA_SET_DESCR:
-		dprintk(verbose, DST_CA_INFO, 1, " Setting descrambler");
-		if ((ca_set_slot_descr()) < 0) {
-			dprintk(verbose, DST_CA_ERROR, 1, " -->CA_SET_DESCR Failed !");
-			result = -1;
-			goto free_mem_and_exit;
-		}
-		dprintk(verbose, DST_CA_INFO, 1, " -->CA_SET_DESCR Success !");
-		break;
-	case CA_SET_PID:
-		dprintk(verbose, DST_CA_INFO, 1, " Setting PID");
-		if ((ca_set_pid()) < 0) {
-			dprintk(verbose, DST_CA_ERROR, 1, " -->CA_SET_PID Failed !");
-			result = -1;
-			goto free_mem_and_exit;
-		}
-		dprintk(verbose, DST_CA_INFO, 1, " -->CA_SET_PID Success !");
-	default:
-		result = -EOPNOTSUPP;
-	};
- free_mem_and_exit:
-	kfree (p_ca_message);
-	kfree (p_ca_slot_info);
-	kfree (p_ca_caps);
-
-	mutex_unlock(&dst_ca_mutex);
-	return result;
-}
-
-static int dst_ca_open(struct inode *inode, struct file *file)
-{
-	dprintk(verbose, DST_CA_DEBUG, 1, " Device opened [%p] ", file);
-	try_module_get(THIS_MODULE);
-
-	return 0;
-}
-
-static int dst_ca_release(struct inode *inode, struct file *file)
-{
-	dprintk(verbose, DST_CA_DEBUG, 1, " Device closed.");
-	module_put(THIS_MODULE);
-
-	return 0;
-}
-
-static ssize_t dst_ca_read(struct file *file, char __user *buffer, size_t length, loff_t *offset)
-{
-	ssize_t bytes_read = 0;
-
-	dprintk(verbose, DST_CA_DEBUG, 1, " Device read.");
-
-	return bytes_read;
-}
-
-static ssize_t dst_ca_write(struct file *file, const char __user *buffer, size_t length, loff_t *offset)
-{
-	dprintk(verbose, DST_CA_DEBUG, 1, " Device write.");
-
-	return 0;
-}
-
-static const struct file_operations dst_ca_fops = {
-	.owner = THIS_MODULE,
-	.unlocked_ioctl = dst_ca_ioctl,
-	.open = dst_ca_open,
-	.release = dst_ca_release,
-	.read = dst_ca_read,
-	.write = dst_ca_write,
-	.llseek = noop_llseek,
-};
-
-static struct dvb_device dvbdev_ca = {
-	.priv = NULL,
-	.users = 1,
-	.readers = 1,
-	.writers = 1,
-	.fops = &dst_ca_fops
-};
-
-struct dvb_device *dst_ca_attach(struct dst_state *dst, struct dvb_adapter *dvb_adapter)
-{
-	struct dvb_device *dvbdev;
-
-	dprintk(verbose, DST_CA_ERROR, 1, "registering DST-CA device");
-	if (dvb_register_device(dvb_adapter, &dvbdev, &dvbdev_ca, dst, DVB_DEVICE_CA) == 0) {
-		dst->dst_ca = dvbdev;
-		return dst->dst_ca;
-	}
-
-	return NULL;
-}
-
-EXPORT_SYMBOL(dst_ca_attach);
-
-MODULE_DESCRIPTION("DST DVB-S/T/C Combo CA driver");
-MODULE_AUTHOR("Manu Abraham");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/bt8xx/dst_ca.h b/drivers/media/dvb/bt8xx/dst_ca.h
deleted file mode 100644
index 59cd0dd..0000000
--- a/drivers/media/dvb/bt8xx/dst_ca.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
-	CA-driver for TwinHan DST Frontend/Card
-
-	Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef _DST_CA_H_
-#define _DST_CA_H_
-
-#define RETRIES			5
-
-
-#define	CA_APP_INFO_ENQUIRY	0x9f8020
-#define	CA_APP_INFO		0x9f8021
-#define	CA_ENTER_MENU		0x9f8022
-#define CA_INFO_ENQUIRY		0x9f8030
-#define	CA_INFO			0x9f8031
-#define CA_PMT			0x9f8032
-#define CA_PMT_REPLY		0x9f8033
-
-#define CA_CLOSE_MMI		0x9f8800
-#define CA_DISPLAY_CONTROL	0x9f8801
-#define CA_DISPLAY_REPLY	0x9f8802
-#define CA_TEXT_LAST		0x9f8803
-#define CA_TEXT_MORE		0x9f8804
-#define CA_KEYPAD_CONTROL	0x9f8805
-#define CA_KEYPRESS		0x9f8806
-
-#define CA_ENQUIRY		0x9f8807
-#define CA_ANSWER		0x9f8808
-#define CA_MENU_LAST		0x9f8809
-#define CA_MENU_MORE		0x9f880a
-#define CA_MENU_ANSWER		0x9f880b
-#define CA_LIST_LAST		0x9f880c
-#define CA_LIST_MORE		0x9f880d
-
-
-struct dst_ca_private {
-	struct dst_state *dst;
-	struct dvb_device *dvbdev;
-};
-
-
-#endif
diff --git a/drivers/media/dvb/bt8xx/dst_common.h b/drivers/media/dvb/bt8xx/dst_common.h
deleted file mode 100644
index d70d98f..0000000
--- a/drivers/media/dvb/bt8xx/dst_common.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
-	Frontend-driver for TwinHan DST Frontend
-
-	Copyright (C) 2003 Jamie Honan
-	Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef DST_COMMON_H
-#define DST_COMMON_H
-
-#include <linux/dvb/frontend.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-#include "bt878.h"
-
-#include "dst_ca.h"
-
-
-#define NO_DELAY		0
-#define LONG_DELAY		1
-#define DEVICE_INIT		2
-
-#define DELAY			1
-
-#define DST_TYPE_IS_SAT		0
-#define DST_TYPE_IS_TERR	1
-#define DST_TYPE_IS_CABLE	2
-#define DST_TYPE_IS_ATSC	3
-
-#define DST_TYPE_HAS_TS188	1
-#define DST_TYPE_HAS_TS204	2
-#define DST_TYPE_HAS_SYMDIV	4
-#define DST_TYPE_HAS_FW_1	8
-#define DST_TYPE_HAS_FW_2	16
-#define DST_TYPE_HAS_FW_3	32
-#define DST_TYPE_HAS_FW_BUILD	64
-#define DST_TYPE_HAS_OBS_REGS	128
-#define DST_TYPE_HAS_INC_COUNT	256
-#define DST_TYPE_HAS_MULTI_FE	512
-#define DST_TYPE_HAS_NEWTUNE_2	1024
-#define DST_TYPE_HAS_DBOARD	2048
-#define DST_TYPE_HAS_VLF	4096
-
-/*	Card capability list	*/
-
-#define DST_TYPE_HAS_MAC	1
-#define DST_TYPE_HAS_DISEQC3	2
-#define DST_TYPE_HAS_DISEQC4	4
-#define DST_TYPE_HAS_DISEQC5	8
-#define DST_TYPE_HAS_MOTO	16
-#define DST_TYPE_HAS_CA		32
-#define	DST_TYPE_HAS_ANALOG	64	/*	Analog inputs	*/
-#define DST_TYPE_HAS_SESSION	128
-
-#define TUNER_TYPE_MULTI	1
-#define TUNER_TYPE_UNKNOWN	2
-/*	DVB-S		*/
-#define TUNER_TYPE_L64724	4
-#define TUNER_TYPE_STV0299	8
-#define TUNER_TYPE_MB86A15	16
-
-/*	DVB-T		*/
-#define TUNER_TYPE_TDA10046	32
-
-/*	ATSC		*/
-#define TUNER_TYPE_NXT200x	64
-
-
-#define RDC_8820_PIO_0_DISABLE	0
-#define RDC_8820_PIO_0_ENABLE	1
-#define RDC_8820_INT		2
-#define RDC_8820_RESET		4
-
-/*	DST Communication	*/
-#define GET_REPLY		1
-#define NO_REPLY		0
-
-#define GET_ACK			1
-#define FIXED_COMM		8
-
-#define ACK			0xff
-
-struct dst_state {
-
-	struct i2c_adapter* i2c;
-
-	struct bt878* bt;
-
-	/* configuration settings */
-	const struct dst_config* config;
-
-	struct dvb_frontend frontend;
-
-	/* private ASIC data */
-	u8 tx_tuna[10];
-	u8 rx_tuna[10];
-	u8 rxbuffer[10];
-	u8 diseq_flags;
-	u8 dst_type;
-	u32 type_flags;
-	u32 frequency;		/* intermediate frequency in kHz for QPSK */
-	fe_spectral_inversion_t inversion;
-	u32 symbol_rate;	/* symbol rate in Symbols per second */
-	fe_code_rate_t fec;
-	fe_sec_voltage_t voltage;
-	fe_sec_tone_mode_t tone;
-	u32 decode_freq;
-	u8 decode_lock;
-	u16 decode_strength;
-	u16 decode_snr;
-	unsigned long cur_jiff;
-	u8 k22;
-	u32 bandwidth;
-	u32 dst_hw_cap;
-	u8 dst_fw_version;
-	fe_sec_mini_cmd_t minicmd;
-	fe_modulation_t modulation;
-	u8 messages[256];
-	u8 mac_address[8];
-	u8 fw_version[8];
-	u8 card_info[8];
-	u8 vendor[8];
-	u8 board_info[8];
-	u32 tuner_type;
-	char *tuner_name;
-	struct mutex dst_mutex;
-	u8 fw_name[8];
-	struct dvb_device *dst_ca;
-};
-
-struct tuner_types {
-	u32 tuner_type;
-	char *tuner_name;
-	char *board_name;
-	char *fw_name;
-};
-
-struct dst_types {
-	char *device_id;
-	int offset;
-	u8 dst_type;
-	u32 type_flags;
-	u32 dst_feature;
-	u32 tuner_type;
-};
-
-struct dst_config
-{
-	/* the ASIC i2c address */
-	u8 demod_address;
-};
-
-int rdc_reset_state(struct dst_state *state);
-
-int dst_wait_dst_ready(struct dst_state *state, u8 delay_mode);
-int dst_pio_disable(struct dst_state *state);
-int dst_error_recovery(struct dst_state* state);
-int dst_error_bailout(struct dst_state *state);
-int dst_comm_init(struct dst_state* state);
-
-int write_dst(struct dst_state *state, u8 * data, u8 len);
-int read_dst(struct dst_state *state, u8 * ret, u8 len);
-u8 dst_check_sum(u8 * buf, u32 len);
-struct dst_state* dst_attach(struct dst_state* state, struct dvb_adapter *dvb_adapter);
-struct dvb_device *dst_ca_attach(struct dst_state *state, struct dvb_adapter *dvb_adapter);
-
-
-#endif // DST_COMMON_H
diff --git a/drivers/media/dvb/bt8xx/dst_priv.h b/drivers/media/dvb/bt8xx/dst_priv.h
deleted file mode 100644
index 3974a4c..0000000
--- a/drivers/media/dvb/bt8xx/dst_priv.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * dst-bt878.h: part of the DST driver for the TwinHan DST Frontend
- *
- * Copyright (C) 2003 Jamie Honan
- */
-
-struct dst_gpio_enable {
-	u32	mask;
-	u32	enable;
-};
-
-struct dst_gpio_output {
-	u32	mask;
-	u32	highvals;
-};
-
-struct dst_gpio_read {
-	unsigned long value;
-};
-
-union dst_gpio_packet {
-	struct dst_gpio_enable enb;
-	struct dst_gpio_output outp;
-	struct dst_gpio_read rd;
-	int    psize;
-};
-
-#define DST_IG_ENABLE	0
-#define DST_IG_WRITE	1
-#define DST_IG_READ	2
-#define DST_IG_TS       3
-
-struct bt878;
-
-int bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *mp);
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
deleted file mode 100644
index 81fab9a..0000000
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ /dev/null
@@ -1,975 +0,0 @@
-/*
- * Bt8xx based DVB adapter driver
- *
- * Copyright (C) 2002,2003 Florian Schirmer <jolt@tuxbox.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#define pr_fmt(fmt) "dvb_bt8xx: " fmt
-
-#include <linux/bitops.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb-bt8xx.h"
-#include "bt878.h"
-
-static int debug;
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-#define dprintk( args... ) \
-	do { \
-		if (debug) printk(KERN_DEBUG args); \
-	} while (0)
-
-#define IF_FREQUENCYx6 217    /* 6 * 36.16666666667MHz */
-
-static void dvb_bt8xx_task(unsigned long data)
-{
-	struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *)data;
-
-	//printk("%d ", card->bt->finished_block);
-
-	while (card->bt->last_block != card->bt->finished_block) {
-		(card->bt->TS_Size ? dvb_dmx_swfilter_204 : dvb_dmx_swfilter)
-			(&card->demux,
-			 &card->bt->buf_cpu[card->bt->last_block *
-					    card->bt->block_bytes],
-			 card->bt->block_bytes);
-		card->bt->last_block = (card->bt->last_block + 1) %
-					card->bt->block_count;
-	}
-}
-
-static int dvb_bt8xx_start_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct dvb_demux*dvbdmx = dvbdmxfeed->demux;
-	struct dvb_bt8xx_card *card = dvbdmx->priv;
-	int rc;
-
-	dprintk("dvb_bt8xx: start_feed\n");
-
-	if (!dvbdmx->dmx.frontend)
-		return -EINVAL;
-
-	mutex_lock(&card->lock);
-	card->nfeeds++;
-	rc = card->nfeeds;
-	if (card->nfeeds == 1)
-		bt878_start(card->bt, card->gpio_mode,
-			    card->op_sync_orin, card->irq_err_ignore);
-	mutex_unlock(&card->lock);
-	return rc;
-}
-
-static int dvb_bt8xx_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
-	struct dvb_bt8xx_card *card = dvbdmx->priv;
-
-	dprintk("dvb_bt8xx: stop_feed\n");
-
-	if (!dvbdmx->dmx.frontend)
-		return -EINVAL;
-
-	mutex_lock(&card->lock);
-	card->nfeeds--;
-	if (card->nfeeds == 0)
-		bt878_stop(card->bt);
-	mutex_unlock(&card->lock);
-
-	return 0;
-}
-
-static int is_pci_slot_eq(struct pci_dev* adev, struct pci_dev* bdev)
-{
-	if ((adev->subsystem_vendor == bdev->subsystem_vendor) &&
-		(adev->subsystem_device == bdev->subsystem_device) &&
-		(adev->bus->number == bdev->bus->number) &&
-		(PCI_SLOT(adev->devfn) == PCI_SLOT(bdev->devfn)))
-		return 1;
-	return 0;
-}
-
-static struct bt878 __devinit *dvb_bt8xx_878_match(unsigned int bttv_nr, struct pci_dev* bttv_pci_dev)
-{
-	unsigned int card_nr;
-
-	/* Hmm, n squared. Hope n is small */
-	for (card_nr = 0; card_nr < bt878_num; card_nr++)
-		if (is_pci_slot_eq(bt878[card_nr].dev, bttv_pci_dev))
-			return &bt878[card_nr];
-	return NULL;
-}
-
-static int thomson_dtt7579_demod_init(struct dvb_frontend* fe)
-{
-	static u8 mt352_clock_config [] = { 0x89, 0x38, 0x38 };
-	static u8 mt352_reset [] = { 0x50, 0x80 };
-	static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
-	static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0x20 };
-	static u8 mt352_gpp_ctl_cfg [] = { 0x8C, 0x33 };
-	static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
-
-	mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
-	udelay(2000);
-	mt352_write(fe, mt352_reset, sizeof(mt352_reset));
-	mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
-
-	mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
-	mt352_write(fe, mt352_gpp_ctl_cfg, sizeof(mt352_gpp_ctl_cfg));
-	mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
-
-	return 0;
-}
-
-static int thomson_dtt7579_tuner_calc_regs(struct dvb_frontend *fe, u8* pllbuf, int buf_len)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	u32 div;
-	unsigned char bs = 0;
-	unsigned char cp = 0;
-
-	if (buf_len < 5)
-		return -EINVAL;
-
-	div = (((c->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
-
-	if (c->frequency < 542000000)
-		cp = 0xb4;
-	else if (c->frequency < 771000000)
-		cp = 0xbc;
-	else
-		cp = 0xf4;
-
-	if (c->frequency == 0)
-		bs = 0x03;
-	else if (c->frequency < 443250000)
-		bs = 0x02;
-	else
-		bs = 0x08;
-
-	pllbuf[0] = 0x60;
-	pllbuf[1] = div >> 8;
-	pllbuf[2] = div & 0xff;
-	pllbuf[3] = cp;
-	pllbuf[4] = bs;
-
-	return 5;
-}
-
-static struct mt352_config thomson_dtt7579_config = {
-	.demod_address = 0x0f,
-	.demod_init = thomson_dtt7579_demod_init,
-};
-
-static struct zl10353_config thomson_dtt7579_zl10353_config = {
-	.demod_address = 0x0f,
-};
-
-static int cx24108_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	u32 freq = c->frequency;
-	int i, a, n, pump;
-	u32 band, pll;
-	u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000,
-		1576000,1718000,1856000,2036000,2150000};
-	u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000,
-		0x00102000,0x00104000,0x00108000,0x00110000,
-		0x00120000,0x00140000};
-
-	#define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */
-	dprintk("cx24108 debug: entering SetTunerFreq, freq=%d\n", freq);
-
-	/* This is really the bit driving the tuner chip cx24108 */
-
-	if (freq<950000)
-		freq = 950000; /* kHz */
-	else if (freq>2150000)
-		freq = 2150000; /* satellite IF is 950..2150MHz */
-
-	/* decide which VCO to use for the input frequency */
-	for(i = 1; (i < ARRAY_SIZE(osci) - 1) && (osci[i] < freq); i++);
-	dprintk("cx24108 debug: select vco #%d (f=%d)\n", i, freq);
-	band=bandsel[i];
-	/* the gain values must be set by SetSymbolrate */
-	/* compute the pll divider needed, from Conexant data sheet,
-	   resolved for (n*32+a), remember f(vco) is f(receive) *2 or *4,
-	   depending on the divider bit. It is set to /4 on the 2 lowest
-	   bands  */
-	n=((i<=2?2:1)*freq*10L)/(XTAL/100);
-	a=n%32; n/=32; if(a==0) n--;
-	pump=(freq<(osci[i-1]+osci[i])/2);
-	pll=0xf8000000|
-	    ((pump?1:2)<<(14+11))|
-	    ((n&0x1ff)<<(5+11))|
-	    ((a&0x1f)<<11);
-	/* everything is shifted left 11 bits to left-align the bits in the
-	   32bit word. Output to the tuner goes MSB-aligned, after all */
-	dprintk("cx24108 debug: pump=%d, n=%d, a=%d\n", pump, n, a);
-	cx24110_pll_write(fe,band);
-	/* set vga and vca to their widest-band settings, as a precaution.
-	   SetSymbolrate might not be called to set this up */
-	cx24110_pll_write(fe,0x500c0000);
-	cx24110_pll_write(fe,0x83f1f800);
-	cx24110_pll_write(fe,pll);
-	//writereg(client,0x56,0x7f);
-
-	return 0;
-}
-
-static int pinnsat_tuner_init(struct dvb_frontend* fe)
-{
-	struct dvb_bt8xx_card *card = fe->dvb->priv;
-
-	bttv_gpio_enable(card->bttv_nr, 1, 1);  /* output */
-	bttv_write_gpio(card->bttv_nr, 1, 1);   /* relay on */
-
-	return 0;
-}
-
-static int pinnsat_tuner_sleep(struct dvb_frontend* fe)
-{
-	struct dvb_bt8xx_card *card = fe->dvb->priv;
-
-	bttv_write_gpio(card->bttv_nr, 1, 0);   /* relay off */
-
-	return 0;
-}
-
-static struct cx24110_config pctvsat_config = {
-	.demod_address = 0x55,
-};
-
-static int microtune_mt7202dtf_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv;
-	u8 cfg, cpump, band_select;
-	u8 data[4];
-	u32 div;
-	struct i2c_msg msg = { .addr = 0x60, .flags = 0, .buf = data, .len = sizeof(data) };
-
-	div = (36000000 + c->frequency + 83333) / 166666;
-	cfg = 0x88;
-
-	if (c->frequency < 175000000)
-		cpump = 2;
-	else if (c->frequency < 390000000)
-		cpump = 1;
-	else if (c->frequency < 470000000)
-		cpump = 2;
-	else if (c->frequency < 750000000)
-		cpump = 2;
-	else
-		cpump = 3;
-
-	if (c->frequency < 175000000)
-		band_select = 0x0e;
-	else if (c->frequency < 470000000)
-		band_select = 0x05;
-	else
-		band_select = 0x03;
-
-	data[0] = (div >> 8) & 0x7f;
-	data[1] = div & 0xff;
-	data[2] = ((div >> 10) & 0x60) | cfg;
-	data[3] = (cpump << 6) | band_select;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	i2c_transfer(card->i2c_adapter, &msg, 1);
-	return (div * 166666 - 36000000);
-}
-
-static int microtune_mt7202dtf_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
-{
-	struct dvb_bt8xx_card* bt = (struct dvb_bt8xx_card*) fe->dvb->priv;
-
-	return request_firmware(fw, name, &bt->bt->dev->dev);
-}
-
-static struct sp887x_config microtune_mt7202dtf_config = {
-	.demod_address = 0x70,
-	.request_firmware = microtune_mt7202dtf_request_firmware,
-};
-
-static int advbt771_samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
-{
-	static u8 mt352_clock_config [] = { 0x89, 0x38, 0x2d };
-	static u8 mt352_reset [] = { 0x50, 0x80 };
-	static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
-	static u8 mt352_agc_cfg [] = { 0x67, 0x10, 0x23, 0x00, 0xFF, 0xFF,
-				       0x00, 0xFF, 0x00, 0x40, 0x40 };
-	static u8 mt352_av771_extra[] = { 0xB5, 0x7A };
-	static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
-
-	mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
-	udelay(2000);
-	mt352_write(fe, mt352_reset, sizeof(mt352_reset));
-	mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
-
-	mt352_write(fe, mt352_agc_cfg,sizeof(mt352_agc_cfg));
-	udelay(2000);
-	mt352_write(fe, mt352_av771_extra,sizeof(mt352_av771_extra));
-	mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
-
-	return 0;
-}
-
-static int advbt771_samsung_tdtc9251dh0_tuner_calc_regs(struct dvb_frontend *fe, u8 *pllbuf, int buf_len)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	u32 div;
-	unsigned char bs = 0;
-	unsigned char cp = 0;
-
-	if (buf_len < 5) return -EINVAL;
-
-	div = (((c->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
-
-	if (c->frequency < 150000000)
-		cp = 0xB4;
-	else if (c->frequency < 173000000)
-		cp = 0xBC;
-	else if (c->frequency < 250000000)
-		cp = 0xB4;
-	else if (c->frequency < 400000000)
-		cp = 0xBC;
-	else if (c->frequency < 420000000)
-		cp = 0xF4;
-	else if (c->frequency < 470000000)
-		cp = 0xFC;
-	else if (c->frequency < 600000000)
-		cp = 0xBC;
-	else if (c->frequency < 730000000)
-		cp = 0xF4;
-	else
-		cp = 0xFC;
-
-	if (c->frequency < 150000000)
-		bs = 0x01;
-	else if (c->frequency < 173000000)
-		bs = 0x01;
-	else if (c->frequency < 250000000)
-		bs = 0x02;
-	else if (c->frequency < 400000000)
-		bs = 0x02;
-	else if (c->frequency < 420000000)
-		bs = 0x02;
-	else if (c->frequency < 470000000)
-		bs = 0x02;
-	else if (c->frequency < 600000000)
-		bs = 0x08;
-	else if (c->frequency < 730000000)
-		bs = 0x08;
-	else
-		bs = 0x08;
-
-	pllbuf[0] = 0x61;
-	pllbuf[1] = div >> 8;
-	pllbuf[2] = div & 0xff;
-	pllbuf[3] = cp;
-	pllbuf[4] = bs;
-
-	return 5;
-}
-
-static struct mt352_config advbt771_samsung_tdtc9251dh0_config = {
-	.demod_address = 0x0f,
-	.demod_init = advbt771_samsung_tdtc9251dh0_demod_init,
-};
-
-static struct dst_config dst_config = {
-	.demod_address = 0x55,
-};
-
-static int or51211_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
-{
-	struct dvb_bt8xx_card* bt = (struct dvb_bt8xx_card*) fe->dvb->priv;
-
-	return request_firmware(fw, name, &bt->bt->dev->dev);
-}
-
-static void or51211_setmode(struct dvb_frontend * fe, int mode)
-{
-	struct dvb_bt8xx_card *bt = fe->dvb->priv;
-	bttv_write_gpio(bt->bttv_nr, 0x0002, mode);   /* Reset */
-	msleep(20);
-}
-
-static void or51211_reset(struct dvb_frontend * fe)
-{
-	struct dvb_bt8xx_card *bt = fe->dvb->priv;
-
-	/* RESET DEVICE
-	 * reset is controlled by GPIO-0
-	 * when set to 0 causes reset and when to 1 for normal op
-	 * must remain reset for 128 clock cycles on a 50Mhz clock
-	 * also PRM1 PRM2 & PRM4 are controlled by GPIO-1,GPIO-2 & GPIO-4
-	 * We assume that the reset has be held low long enough or we
-	 * have been reset by a power on.  When the driver is unloaded
-	 * reset set to 0 so if reloaded we have been reset.
-	 */
-	/* reset & PRM1,2&4 are outputs */
-	int ret = bttv_gpio_enable(bt->bttv_nr, 0x001F, 0x001F);
-	if (ret != 0)
-		printk(KERN_WARNING "or51211: Init Error - Can't Reset DVR (%i)\n", ret);
-	bttv_write_gpio(bt->bttv_nr, 0x001F, 0x0000);   /* Reset */
-	msleep(20);
-	/* Now set for normal operation */
-	bttv_write_gpio(bt->bttv_nr, 0x0001F, 0x0001);
-	/* wait for operation to begin */
-	msleep(500);
-}
-
-static void or51211_sleep(struct dvb_frontend * fe)
-{
-	struct dvb_bt8xx_card *bt = fe->dvb->priv;
-	bttv_write_gpio(bt->bttv_nr, 0x0001, 0x0000);
-}
-
-static struct or51211_config or51211_config = {
-	.demod_address = 0x15,
-	.request_firmware = or51211_request_firmware,
-	.setmode = or51211_setmode,
-	.reset = or51211_reset,
-	.sleep = or51211_sleep,
-};
-
-static int vp3021_alps_tded4_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv;
-	u8 buf[4];
-	u32 div;
-	struct i2c_msg msg = { .addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf) };
-
-	div = (c->frequency + 36166667) / 166667;
-
-	buf[0] = (div >> 8) & 0x7F;
-	buf[1] = div & 0xFF;
-	buf[2] = 0x85;
-	if ((c->frequency >= 47000000) && (c->frequency < 153000000))
-		buf[3] = 0x01;
-	else if ((c->frequency >= 153000000) && (c->frequency < 430000000))
-		buf[3] = 0x02;
-	else if ((c->frequency >= 430000000) && (c->frequency < 824000000))
-		buf[3] = 0x0C;
-	else if ((c->frequency >= 824000000) && (c->frequency < 863000000))
-		buf[3] = 0x8C;
-	else
-		return -EINVAL;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	i2c_transfer(card->i2c_adapter, &msg, 1);
-	return 0;
-}
-
-static struct nxt6000_config vp3021_alps_tded4_config = {
-	.demod_address = 0x0a,
-	.clock_inversion = 1,
-};
-
-static int digitv_alps_tded4_demod_init(struct dvb_frontend* fe)
-{
-	static u8 mt352_clock_config [] = { 0x89, 0x38, 0x2d };
-	static u8 mt352_reset [] = { 0x50, 0x80 };
-	static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
-	static u8 mt352_agc_cfg [] = { 0x67, 0x20, 0xa0 };
-	static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
-
-	mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
-	udelay(2000);
-	mt352_write(fe, mt352_reset, sizeof(mt352_reset));
-	mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
-	mt352_write(fe, mt352_agc_cfg,sizeof(mt352_agc_cfg));
-	mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
-
-	return 0;
-}
-
-static int digitv_alps_tded4_tuner_calc_regs(struct dvb_frontend *fe,  u8 *pllbuf, int buf_len)
-{
-	u32 div;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-
-	if (buf_len < 5)
-		return -EINVAL;
-
-	div = (((c->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
-
-	pllbuf[0] = 0x61;
-	pllbuf[1] = (div >> 8) & 0x7F;
-	pllbuf[2] = div & 0xFF;
-	pllbuf[3] = 0x85;
-
-	dprintk("frequency %u, div %u\n", c->frequency, div);
-
-	if (c->frequency < 470000000)
-		pllbuf[4] = 0x02;
-	else if (c->frequency > 823000000)
-		pllbuf[4] = 0x88;
-	else
-		pllbuf[4] = 0x08;
-
-	if (c->bandwidth_hz == 8000000)
-		pllbuf[4] |= 0x04;
-
-	return 5;
-}
-
-static void digitv_alps_tded4_reset(struct dvb_bt8xx_card *bt)
-{
-	/*
-	 * Reset the frontend, must be called before trying
-	 * to initialise the MT352 or mt352_attach
-	 * will fail. Same goes for the nxt6000 frontend.
-	 *
-	 */
-
-	int ret = bttv_gpio_enable(bt->bttv_nr, 0x08, 0x08);
-	if (ret != 0)
-		printk(KERN_WARNING "digitv_alps_tded4: Init Error - Can't Reset DVR (%i)\n", ret);
-
-	/* Pulse the reset line */
-	bttv_write_gpio(bt->bttv_nr, 0x08, 0x08); /* High */
-	bttv_write_gpio(bt->bttv_nr, 0x08, 0x00); /* Low  */
-	msleep(100);
-
-	bttv_write_gpio(bt->bttv_nr, 0x08, 0x08); /* High */
-}
-
-static struct mt352_config digitv_alps_tded4_config = {
-	.demod_address = 0x0a,
-	.demod_init = digitv_alps_tded4_demod_init,
-};
-
-static struct lgdt330x_config tdvs_tua6034_config = {
-	.demod_address    = 0x0e,
-	.demod_chip       = LGDT3303,
-	.serial_mpeg      = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */
-};
-
-static void lgdt330x_reset(struct dvb_bt8xx_card *bt)
-{
-	/* Set pin 27 of the lgdt3303 chip high to reset the frontend */
-
-	/* Pulse the reset line */
-	bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */
-	bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000000); /* Low  */
-	msleep(100);
-
-	bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */
-	msleep(100);
-}
-
-static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
-{
-	struct dst_state* state = NULL;
-
-	switch(type) {
-	case BTTV_BOARD_DVICO_DVBT_LITE:
-		card->fe = dvb_attach(mt352_attach, &thomson_dtt7579_config, card->i2c_adapter);
-
-		if (card->fe == NULL)
-			card->fe = dvb_attach(zl10353_attach, &thomson_dtt7579_zl10353_config,
-						  card->i2c_adapter);
-
-		if (card->fe != NULL) {
-			card->fe->ops.tuner_ops.calc_regs = thomson_dtt7579_tuner_calc_regs;
-			card->fe->ops.info.frequency_min = 174000000;
-			card->fe->ops.info.frequency_max = 862000000;
-		}
-		break;
-
-	case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE:
-		lgdt330x_reset(card);
-		card->fe = dvb_attach(lgdt330x_attach, &tdvs_tua6034_config, card->i2c_adapter);
-		if (card->fe != NULL) {
-			dvb_attach(simple_tuner_attach, card->fe,
-				   card->i2c_adapter, 0x61,
-				   TUNER_LG_TDVS_H06XF);
-			dprintk ("dvb_bt8xx: lgdt330x detected\n");
-		}
-		break;
-
-	case BTTV_BOARD_NEBULA_DIGITV:
-		/*
-		 * It is possible to determine the correct frontend using the I2C bus (see the Nebula SDK);
-		 * this would be a cleaner solution than trying each frontend in turn.
-		 */
-
-		/* Old Nebula (marked (c)2003 on high profile pci card) has nxt6000 demod */
-		digitv_alps_tded4_reset(card);
-		card->fe = dvb_attach(nxt6000_attach, &vp3021_alps_tded4_config, card->i2c_adapter);
-		if (card->fe != NULL) {
-			card->fe->ops.tuner_ops.set_params = vp3021_alps_tded4_tuner_set_params;
-			dprintk ("dvb_bt8xx: an nxt6000 was detected on your digitv card\n");
-			break;
-		}
-
-		/* New Nebula (marked (c)2005 on low profile pci card) has mt352 demod */
-		digitv_alps_tded4_reset(card);
-		card->fe = dvb_attach(mt352_attach, &digitv_alps_tded4_config, card->i2c_adapter);
-
-		if (card->fe != NULL) {
-			card->fe->ops.tuner_ops.calc_regs = digitv_alps_tded4_tuner_calc_regs;
-			dprintk ("dvb_bt8xx: an mt352 was detected on your digitv card\n");
-		}
-		break;
-
-	case BTTV_BOARD_AVDVBT_761:
-		card->fe = dvb_attach(sp887x_attach, &microtune_mt7202dtf_config, card->i2c_adapter);
-		if (card->fe) {
-			card->fe->ops.tuner_ops.set_params = microtune_mt7202dtf_tuner_set_params;
-		}
-		break;
-
-	case BTTV_BOARD_AVDVBT_771:
-		card->fe = dvb_attach(mt352_attach, &advbt771_samsung_tdtc9251dh0_config, card->i2c_adapter);
-		if (card->fe != NULL) {
-			card->fe->ops.tuner_ops.calc_regs = advbt771_samsung_tdtc9251dh0_tuner_calc_regs;
-			card->fe->ops.info.frequency_min = 174000000;
-			card->fe->ops.info.frequency_max = 862000000;
-		}
-		break;
-
-	case BTTV_BOARD_TWINHAN_DST:
-		/*	DST is not a frontend driver !!!		*/
-		state = kmalloc(sizeof (struct dst_state), GFP_KERNEL);
-		if (!state) {
-			pr_err("No memory\n");
-			break;
-		}
-		/*	Setup the Card					*/
-		state->config = &dst_config;
-		state->i2c = card->i2c_adapter;
-		state->bt = card->bt;
-		state->dst_ca = NULL;
-		/*	DST is not a frontend, attaching the ASIC	*/
-		if (dvb_attach(dst_attach, state, &card->dvb_adapter) == NULL) {
-			pr_err("%s: Could not find a Twinhan DST\n", __func__);
-			break;
-		}
-		/*	Attach other DST peripherals if any		*/
-		/*	Conditional Access device			*/
-		card->fe = &state->frontend;
-		if (state->dst_hw_cap & DST_TYPE_HAS_CA)
-			dvb_attach(dst_ca_attach, state, &card->dvb_adapter);
-		break;
-
-	case BTTV_BOARD_PINNACLESAT:
-		card->fe = dvb_attach(cx24110_attach, &pctvsat_config, card->i2c_adapter);
-		if (card->fe) {
-			card->fe->ops.tuner_ops.init = pinnsat_tuner_init;
-			card->fe->ops.tuner_ops.sleep = pinnsat_tuner_sleep;
-			card->fe->ops.tuner_ops.set_params = cx24108_tuner_set_params;
-		}
-		break;
-
-	case BTTV_BOARD_PC_HDTV:
-		card->fe = dvb_attach(or51211_attach, &or51211_config, card->i2c_adapter);
-		if (card->fe != NULL)
-			dvb_attach(simple_tuner_attach, card->fe,
-				   card->i2c_adapter, 0x61,
-				   TUNER_PHILIPS_FCV1236D);
-		break;
-	}
-
-	if (card->fe == NULL)
-		pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
-		       card->bt->dev->vendor,
-		       card->bt->dev->device,
-		       card->bt->dev->subsystem_vendor,
-		       card->bt->dev->subsystem_device);
-	else
-		if (dvb_register_frontend(&card->dvb_adapter, card->fe)) {
-			pr_err("Frontend registration failed!\n");
-			dvb_frontend_detach(card->fe);
-			card->fe = NULL;
-		}
-}
-
-static int __devinit dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
-{
-	int result;
-
-	result = dvb_register_adapter(&card->dvb_adapter, card->card_name,
-				      THIS_MODULE, &card->bt->dev->dev,
-				      adapter_nr);
-	if (result < 0) {
-		pr_err("dvb_register_adapter failed (errno = %d)\n", result);
-		return result;
-	}
-	card->dvb_adapter.priv = card;
-
-	card->bt->adapter = card->i2c_adapter;
-
-	memset(&card->demux, 0, sizeof(struct dvb_demux));
-
-	card->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING;
-
-	card->demux.priv = card;
-	card->demux.filternum = 256;
-	card->demux.feednum = 256;
-	card->demux.start_feed = dvb_bt8xx_start_feed;
-	card->demux.stop_feed = dvb_bt8xx_stop_feed;
-	card->demux.write_to_decoder = NULL;
-
-	result = dvb_dmx_init(&card->demux);
-	if (result < 0) {
-		pr_err("dvb_dmx_init failed (errno = %d)\n", result);
-		goto err_unregister_adaptor;
-	}
-
-	card->dmxdev.filternum = 256;
-	card->dmxdev.demux = &card->demux.dmx;
-	card->dmxdev.capabilities = 0;
-
-	result = dvb_dmxdev_init(&card->dmxdev, &card->dvb_adapter);
-	if (result < 0) {
-		pr_err("dvb_dmxdev_init failed (errno = %d)\n", result);
-		goto err_dmx_release;
-	}
-
-	card->fe_hw.source = DMX_FRONTEND_0;
-
-	result = card->demux.dmx.add_frontend(&card->demux.dmx, &card->fe_hw);
-	if (result < 0) {
-		pr_err("dvb_dmx_init failed (errno = %d)\n", result);
-		goto err_dmxdev_release;
-	}
-
-	card->fe_mem.source = DMX_MEMORY_FE;
-
-	result = card->demux.dmx.add_frontend(&card->demux.dmx, &card->fe_mem);
-	if (result < 0) {
-		pr_err("dvb_dmx_init failed (errno = %d)\n", result);
-		goto err_remove_hw_frontend;
-	}
-
-	result = card->demux.dmx.connect_frontend(&card->demux.dmx, &card->fe_hw);
-	if (result < 0) {
-		pr_err("dvb_dmx_init failed (errno = %d)\n", result);
-		goto err_remove_mem_frontend;
-	}
-
-	result = dvb_net_init(&card->dvb_adapter, &card->dvbnet, &card->demux.dmx);
-	if (result < 0) {
-		pr_err("dvb_net_init failed (errno = %d)\n", result);
-		goto err_disconnect_frontend;
-	}
-
-	tasklet_init(&card->bt->tasklet, dvb_bt8xx_task, (unsigned long) card);
-
-	frontend_init(card, type);
-
-	return 0;
-
-err_disconnect_frontend:
-	card->demux.dmx.disconnect_frontend(&card->demux.dmx);
-err_remove_mem_frontend:
-	card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_mem);
-err_remove_hw_frontend:
-	card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw);
-err_dmxdev_release:
-	dvb_dmxdev_release(&card->dmxdev);
-err_dmx_release:
-	dvb_dmx_release(&card->demux);
-err_unregister_adaptor:
-	dvb_unregister_adapter(&card->dvb_adapter);
-	return result;
-}
-
-static int __devinit dvb_bt8xx_probe(struct bttv_sub_device *sub)
-{
-	struct dvb_bt8xx_card *card;
-	struct pci_dev* bttv_pci_dev;
-	int ret;
-
-	if (!(card = kzalloc(sizeof(struct dvb_bt8xx_card), GFP_KERNEL)))
-		return -ENOMEM;
-
-	mutex_init(&card->lock);
-	card->bttv_nr = sub->core->nr;
-	strlcpy(card->card_name, sub->core->v4l2_dev.name, sizeof(card->card_name));
-	card->i2c_adapter = &sub->core->i2c_adap;
-
-	switch(sub->core->type) {
-	case BTTV_BOARD_PINNACLESAT:
-		card->gpio_mode = 0x0400c060;
-		/* should be: BT878_A_GAIN=0,BT878_A_PWRDN,BT878_DA_DPM,BT878_DA_SBR,
-			      BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */
-		card->op_sync_orin = BT878_RISC_SYNC_MASK;
-		card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
-		break;
-
-	case BTTV_BOARD_DVICO_DVBT_LITE:
-		card->gpio_mode = 0x0400C060;
-		card->op_sync_orin = BT878_RISC_SYNC_MASK;
-		card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
-		/* 26, 15, 14, 6, 5
-		 * A_PWRDN  DA_DPM DA_SBR DA_IOM_DA
-		 * DA_APP(parallel) */
-		break;
-
-	case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE:
-		card->gpio_mode = 0x0400c060;
-		card->op_sync_orin = BT878_RISC_SYNC_MASK;
-		card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
-		break;
-
-	case BTTV_BOARD_NEBULA_DIGITV:
-	case BTTV_BOARD_AVDVBT_761:
-		card->gpio_mode = (1 << 26) | (1 << 14) | (1 << 5);
-		card->op_sync_orin = BT878_RISC_SYNC_MASK;
-		card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
-		/* A_PWRDN DA_SBR DA_APP (high speed serial) */
-		break;
-
-	case BTTV_BOARD_AVDVBT_771: //case 0x07711461:
-		card->gpio_mode = 0x0400402B;
-		card->op_sync_orin = BT878_RISC_SYNC_MASK;
-		card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
-		/* A_PWRDN DA_SBR  DA_APP[0] PKTP=10 RISC_ENABLE FIFO_ENABLE*/
-		break;
-
-	case BTTV_BOARD_TWINHAN_DST:
-		card->gpio_mode = 0x2204f2c;
-		card->op_sync_orin = BT878_RISC_SYNC_MASK;
-		card->irq_err_ignore = BT878_APABORT | BT878_ARIPERR |
-				       BT878_APPERR | BT878_AFBUS;
-		/* 25,21,14,11,10,9,8,3,2 then
-		 * 0x33 = 5,4,1,0
-		 * A_SEL=SML, DA_MLB, DA_SBR,
-		 * DA_SDR=f, fifo trigger = 32 DWORDS
-		 * IOM = 0 == audio A/D
-		 * DPM = 0 == digital audio mode
-		 * == async data parallel port
-		 * then 0x33 (13 is set by start_capture)
-		 * DA_APP = async data parallel port,
-		 * ACAP_EN = 1,
-		 * RISC+FIFO ENABLE */
-		break;
-
-	case BTTV_BOARD_PC_HDTV:
-		card->gpio_mode = 0x0100EC7B;
-		card->op_sync_orin = BT878_RISC_SYNC_MASK;
-		card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
-		break;
-
-	default:
-		pr_err("Unknown bttv card type: %d\n", sub->core->type);
-		kfree(card);
-		return -ENODEV;
-	}
-
-	dprintk("dvb_bt8xx: identified card%d as %s\n", card->bttv_nr, card->card_name);
-
-	if (!(bttv_pci_dev = bttv_get_pcidev(card->bttv_nr))) {
-		pr_err("no pci device for card %d\n", card->bttv_nr);
-		kfree(card);
-		return -ENODEV;
-	}
-
-	if (!(card->bt = dvb_bt8xx_878_match(card->bttv_nr, bttv_pci_dev))) {
-		pr_err("unable to determine DMA core of card %d,\n", card->bttv_nr);
-		pr_err("if you have the ALSA bt87x audio driver installed, try removing it.\n");
-
-		kfree(card);
-		return -ENODEV;
-	}
-
-	mutex_init(&card->bt->gpio_lock);
-	card->bt->bttv_nr = sub->core->nr;
-
-	if ( (ret = dvb_bt8xx_load_card(card, sub->core->type)) ) {
-		kfree(card);
-		return ret;
-	}
-
-	dev_set_drvdata(&sub->dev, card);
-	return 0;
-}
-
-static void dvb_bt8xx_remove(struct bttv_sub_device *sub)
-{
-	struct dvb_bt8xx_card *card = dev_get_drvdata(&sub->dev);
-
-	dprintk("dvb_bt8xx: unloading card%d\n", card->bttv_nr);
-
-	bt878_stop(card->bt);
-	tasklet_kill(&card->bt->tasklet);
-	dvb_net_release(&card->dvbnet);
-	card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_mem);
-	card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw);
-	dvb_dmxdev_release(&card->dmxdev);
-	dvb_dmx_release(&card->demux);
-	if (card->fe) {
-		dvb_unregister_frontend(card->fe);
-		dvb_frontend_detach(card->fe);
-	}
-	dvb_unregister_adapter(&card->dvb_adapter);
-
-	kfree(card);
-}
-
-static struct bttv_sub_driver driver = {
-	.drv = {
-		.name		= "dvb-bt8xx",
-	},
-	.probe		= dvb_bt8xx_probe,
-	.remove		= dvb_bt8xx_remove,
-	/* FIXME:
-	 * .shutdown	= dvb_bt8xx_shutdown,
-	 * .suspend	= dvb_bt8xx_suspend,
-	 * .resume	= dvb_bt8xx_resume,
-	 */
-};
-
-static int __init dvb_bt8xx_init(void)
-{
-	return bttv_sub_register(&driver, "dvb");
-}
-
-static void __exit dvb_bt8xx_exit(void)
-{
-	bttv_sub_unregister(&driver);
-}
-
-module_init(dvb_bt8xx_init);
-module_exit(dvb_bt8xx_exit);
-
-MODULE_DESCRIPTION("Bt8xx based DVB adapter driver");
-MODULE_AUTHOR("Florian Schirmer <jolt@tuxbox.org>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.h b/drivers/media/dvb/bt8xx/dvb-bt8xx.h
deleted file mode 100644
index 4499ed2..0000000
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Bt8xx based DVB adapter driver
- *
- * Copyright (C) 2002,2003 Florian Schirmer <jolt@tuxbox.org>
- * Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@htp-tel.de>
- * Copyright (C) 1999-2001 Ralph  Metzler & Marcus Metzler for convergence integrated media GmbH
- * Copyright (C) 1998,1999 Christian Theiss <mistert@rz.fh-augsburg.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef DVB_BT8XX_H
-#define DVB_BT8XX_H
-
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-#include "dvbdev.h"
-#include "dvb_net.h"
-#include "bttv.h"
-#include "mt352.h"
-#include "sp887x.h"
-#include "dst_common.h"
-#include "nxt6000.h"
-#include "cx24110.h"
-#include "or51211.h"
-#include "lgdt330x.h"
-#include "zl10353.h"
-#include "tuner-simple.h"
-
-struct dvb_bt8xx_card {
-	struct mutex lock;
-	int nfeeds;
-	char card_name[32];
-	struct dvb_adapter dvb_adapter;
-	struct bt878 *bt;
-	unsigned int bttv_nr;
-	struct dvb_demux demux;
-	struct dmxdev dmxdev;
-	struct dmx_frontend fe_hw;
-	struct dmx_frontend fe_mem;
-	u32 gpio_mode;
-	u32 op_sync_orin;
-	u32 irq_err_ignore;
-	struct i2c_adapter *i2c_adapter;
-	struct dvb_net dvbnet;
-
-	struct dvb_frontend* fe;
-};
-
-#endif /* DVB_BT8XX_H */
diff --git a/drivers/media/dvb/ddbridge/Kconfig b/drivers/media/dvb/ddbridge/Kconfig
deleted file mode 100644
index d099e1a..0000000
--- a/drivers/media/dvb/ddbridge/Kconfig
+++ /dev/null
@@ -1,18 +0,0 @@
-config DVB_DDBRIDGE
-	tristate "Digital Devices bridge support"
-	depends on DVB_CORE && PCI && I2C
-	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
-	select DVB_STV6110x if !DVB_FE_CUSTOMISE
-	select DVB_STV090x if !DVB_FE_CUSTOMISE
-	select DVB_DRXK if !DVB_FE_CUSTOMISE
-	select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE
-	---help---
-	  Support for cards with the Digital Devices PCI express bridge:
-	  - Octopus PCIe Bridge
-	  - Octopus mini PCIe Bridge
-	  - Octopus LE
-	  - DuoFlex S2 Octopus
-	  - DuoFlex CT Octopus
-	  - cineS2(v6)
-
-	  Say Y if you own such a card and want to use it.
diff --git a/drivers/media/dvb/ddbridge/Makefile b/drivers/media/dvb/ddbridge/Makefile
deleted file mode 100644
index 38019ba..0000000
--- a/drivers/media/dvb/ddbridge/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# Makefile for the ddbridge device driver
-#
-
-ddbridge-objs := ddbridge-core.o
-
-obj-$(CONFIG_DVB_DDBRIDGE) += ddbridge.o
-
-ccflags-y += -Idrivers/media/dvb/dvb-core/
-ccflags-y += -Idrivers/media/dvb/frontends/
-ccflags-y += -Idrivers/media/common/tuners/
-
-# For the staging CI driver cxd2099
-ccflags-y += -Idrivers/staging/media/cxd2099/
diff --git a/drivers/media/dvb/ddbridge/ddbridge-core.c b/drivers/media/dvb/ddbridge/ddbridge-core.c
deleted file mode 100644
index ebf3f05..0000000
--- a/drivers/media/dvb/ddbridge/ddbridge-core.c
+++ /dev/null
@@ -1,1723 +0,0 @@
-/*
- * ddbridge.c: Digital Devices PCIe bridge driver
- *
- * Copyright (C) 2010-2011 Digital Devices GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 only, as published by the Free Software Foundation.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
-#include <linux/io.h>
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-#include <linux/timer.h>
-#include <linux/i2c.h>
-#include <linux/swab.h>
-#include <linux/vmalloc.h>
-#include "ddbridge.h"
-
-#include "ddbridge-regs.h"
-
-#include "tda18271c2dd.h"
-#include "stv6110x.h"
-#include "stv090x.h"
-#include "lnbh24.h"
-#include "drxk.h"
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-/* MSI had problems with lost interrupts, fixed but needs testing */
-#undef CONFIG_PCI_MSI
-
-/******************************************************************************/
-
-static int i2c_read(struct i2c_adapter *adapter, u8 adr, u8 *val)
-{
-	struct i2c_msg msgs[1] = {{.addr = adr,  .flags = I2C_M_RD,
-				   .buf  = val,  .len   = 1 } };
-	return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1;
-}
-
-static int i2c_read_reg(struct i2c_adapter *adapter, u8 adr, u8 reg, u8 *val)
-{
-	struct i2c_msg msgs[2] = {{.addr = adr,  .flags = 0,
-				   .buf  = &reg, .len   = 1 },
-				  {.addr = adr,  .flags = I2C_M_RD,
-				   .buf  = val,  .len   = 1 } };
-	return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1;
-}
-
-static int i2c_read_reg16(struct i2c_adapter *adapter, u8 adr,
-			  u16 reg, u8 *val)
-{
-	u8 msg[2] = {reg>>8, reg&0xff};
-	struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
-				   .buf  = msg, .len   = 2},
-				  {.addr = adr, .flags = I2C_M_RD,
-				   .buf  = val, .len   = 1} };
-	return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1;
-}
-
-static int ddb_i2c_cmd(struct ddb_i2c *i2c, u32 adr, u32 cmd)
-{
-	struct ddb *dev = i2c->dev;
-	int stat;
-	u32 val;
-
-	i2c->done = 0;
-	ddbwritel((adr << 9) | cmd, i2c->regs + I2C_COMMAND);
-	stat = wait_event_timeout(i2c->wq, i2c->done == 1, HZ);
-	if (stat <= 0) {
-		printk(KERN_ERR "I2C timeout\n");
-		{ /* MSI debugging*/
-			u32 istat = ddbreadl(INTERRUPT_STATUS);
-			printk(KERN_ERR "IRS %08x\n", istat);
-			ddbwritel(istat, INTERRUPT_ACK);
-		}
-		return -EIO;
-	}
-	val = ddbreadl(i2c->regs+I2C_COMMAND);
-	if (val & 0x70000)
-		return -EIO;
-	return 0;
-}
-
-static int ddb_i2c_master_xfer(struct i2c_adapter *adapter,
-			       struct i2c_msg msg[], int num)
-{
-	struct ddb_i2c *i2c = (struct ddb_i2c *)i2c_get_adapdata(adapter);
-	struct ddb *dev = i2c->dev;
-	u8 addr = 0;
-
-	if (num)
-		addr = msg[0].addr;
-
-	if (num == 2 && msg[1].flags & I2C_M_RD &&
-	    !(msg[0].flags & I2C_M_RD)) {
-		memcpy_toio(dev->regs + I2C_TASKMEM_BASE + i2c->wbuf,
-			    msg[0].buf, msg[0].len);
-		ddbwritel(msg[0].len|(msg[1].len << 16),
-			  i2c->regs+I2C_TASKLENGTH);
-		if (!ddb_i2c_cmd(i2c, addr, 1)) {
-			memcpy_fromio(msg[1].buf,
-				      dev->regs + I2C_TASKMEM_BASE + i2c->rbuf,
-				      msg[1].len);
-			return num;
-		}
-	}
-
-	if (num == 1 && !(msg[0].flags & I2C_M_RD)) {
-		ddbcpyto(I2C_TASKMEM_BASE + i2c->wbuf, msg[0].buf, msg[0].len);
-		ddbwritel(msg[0].len, i2c->regs + I2C_TASKLENGTH);
-		if (!ddb_i2c_cmd(i2c, addr, 2))
-			return num;
-	}
-	if (num == 1 && (msg[0].flags & I2C_M_RD)) {
-		ddbwritel(msg[0].len << 16, i2c->regs + I2C_TASKLENGTH);
-		if (!ddb_i2c_cmd(i2c, addr, 3)) {
-			ddbcpyfrom(msg[0].buf,
-				   I2C_TASKMEM_BASE + i2c->rbuf, msg[0].len);
-			return num;
-		}
-	}
-	return -EIO;
-}
-
-
-static u32 ddb_i2c_functionality(struct i2c_adapter *adap)
-{
-	return I2C_FUNC_SMBUS_EMUL;
-}
-
-struct i2c_algorithm ddb_i2c_algo = {
-	.master_xfer   = ddb_i2c_master_xfer,
-	.functionality = ddb_i2c_functionality,
-};
-
-static void ddb_i2c_release(struct ddb *dev)
-{
-	int i;
-	struct ddb_i2c *i2c;
-	struct i2c_adapter *adap;
-
-	for (i = 0; i < dev->info->port_num; i++) {
-		i2c = &dev->i2c[i];
-		adap = &i2c->adap;
-		i2c_del_adapter(adap);
-	}
-}
-
-static int ddb_i2c_init(struct ddb *dev)
-{
-	int i, j, stat = 0;
-	struct ddb_i2c *i2c;
-	struct i2c_adapter *adap;
-
-	for (i = 0; i < dev->info->port_num; i++) {
-		i2c = &dev->i2c[i];
-		i2c->dev = dev;
-		i2c->nr = i;
-		i2c->wbuf = i * (I2C_TASKMEM_SIZE / 4);
-		i2c->rbuf = i2c->wbuf + (I2C_TASKMEM_SIZE / 8);
-		i2c->regs = 0x80 + i * 0x20;
-		ddbwritel(I2C_SPEED_100, i2c->regs + I2C_TIMING);
-		ddbwritel((i2c->rbuf << 16) | i2c->wbuf,
-			  i2c->regs + I2C_TASKADDRESS);
-		init_waitqueue_head(&i2c->wq);
-
-		adap = &i2c->adap;
-		i2c_set_adapdata(adap, i2c);
-#ifdef I2C_ADAP_CLASS_TV_DIGITAL
-		adap->class = I2C_ADAP_CLASS_TV_DIGITAL|I2C_CLASS_TV_ANALOG;
-#else
-#ifdef I2C_CLASS_TV_ANALOG
-		adap->class = I2C_CLASS_TV_ANALOG;
-#endif
-#endif
-		strcpy(adap->name, "ddbridge");
-		adap->algo = &ddb_i2c_algo;
-		adap->algo_data = (void *)i2c;
-		adap->dev.parent = &dev->pdev->dev;
-		stat = i2c_add_adapter(adap);
-		if (stat)
-			break;
-	}
-	if (stat)
-		for (j = 0; j < i; j++) {
-			i2c = &dev->i2c[j];
-			adap = &i2c->adap;
-			i2c_del_adapter(adap);
-		}
-	return stat;
-}
-
-
-/******************************************************************************/
-/******************************************************************************/
-/******************************************************************************/
-
-#if 0
-static void set_table(struct ddb *dev, u32 off,
-		      dma_addr_t *pbuf, u32 num)
-{
-	u32 i, base;
-	u64 mem;
-
-	base = DMA_BASE_ADDRESS_TABLE + off;
-	for (i = 0; i < num; i++) {
-		mem = pbuf[i];
-		ddbwritel(mem & 0xffffffff, base + i * 8);
-		ddbwritel(mem >> 32, base + i * 8 + 4);
-	}
-}
-#endif
-
-static void ddb_address_table(struct ddb *dev)
-{
-	u32 i, j, base;
-	u64 mem;
-	dma_addr_t *pbuf;
-
-	for (i = 0; i < dev->info->port_num * 2; i++) {
-		base = DMA_BASE_ADDRESS_TABLE + i * 0x100;
-		pbuf = dev->input[i].pbuf;
-		for (j = 0; j < dev->input[i].dma_buf_num; j++) {
-			mem = pbuf[j];
-			ddbwritel(mem & 0xffffffff, base + j * 8);
-			ddbwritel(mem >> 32, base + j * 8 + 4);
-		}
-	}
-	for (i = 0; i < dev->info->port_num; i++) {
-		base = DMA_BASE_ADDRESS_TABLE + 0x800 + i * 0x100;
-		pbuf = dev->output[i].pbuf;
-		for (j = 0; j < dev->output[i].dma_buf_num; j++) {
-			mem = pbuf[j];
-			ddbwritel(mem & 0xffffffff, base + j * 8);
-			ddbwritel(mem >> 32, base + j * 8 + 4);
-		}
-	}
-}
-
-static void io_free(struct pci_dev *pdev, u8 **vbuf,
-		    dma_addr_t *pbuf, u32 size, int num)
-{
-	int i;
-
-	for (i = 0; i < num; i++) {
-		if (vbuf[i]) {
-			pci_free_consistent(pdev, size, vbuf[i], pbuf[i]);
-			vbuf[i] = 0;
-		}
-	}
-}
-
-static int io_alloc(struct pci_dev *pdev, u8 **vbuf,
-		    dma_addr_t *pbuf, u32 size, int num)
-{
-	int i;
-
-	for (i = 0; i < num; i++) {
-		vbuf[i] = pci_alloc_consistent(pdev, size, &pbuf[i]);
-		if (!vbuf[i])
-			return -ENOMEM;
-	}
-	return 0;
-}
-
-static int ddb_buffers_alloc(struct ddb *dev)
-{
-	int i;
-	struct ddb_port *port;
-
-	for (i = 0; i < dev->info->port_num; i++) {
-		port = &dev->port[i];
-		switch (port->class) {
-		case DDB_PORT_TUNER:
-			if (io_alloc(dev->pdev, port->input[0]->vbuf,
-				     port->input[0]->pbuf,
-				     port->input[0]->dma_buf_size,
-				     port->input[0]->dma_buf_num) < 0)
-				return -1;
-			if (io_alloc(dev->pdev, port->input[1]->vbuf,
-				     port->input[1]->pbuf,
-				     port->input[1]->dma_buf_size,
-				     port->input[1]->dma_buf_num) < 0)
-				return -1;
-			break;
-		case DDB_PORT_CI:
-			if (io_alloc(dev->pdev, port->input[0]->vbuf,
-				     port->input[0]->pbuf,
-				     port->input[0]->dma_buf_size,
-				     port->input[0]->dma_buf_num) < 0)
-				return -1;
-			if (io_alloc(dev->pdev, port->output->vbuf,
-				     port->output->pbuf,
-				     port->output->dma_buf_size,
-				     port->output->dma_buf_num) < 0)
-				return -1;
-			break;
-		default:
-			break;
-		}
-	}
-	ddb_address_table(dev);
-	return 0;
-}
-
-static void ddb_buffers_free(struct ddb *dev)
-{
-	int i;
-	struct ddb_port *port;
-
-	for (i = 0; i < dev->info->port_num; i++) {
-		port = &dev->port[i];
-		io_free(dev->pdev, port->input[0]->vbuf,
-			port->input[0]->pbuf,
-			port->input[0]->dma_buf_size,
-			port->input[0]->dma_buf_num);
-		io_free(dev->pdev, port->input[1]->vbuf,
-			port->input[1]->pbuf,
-			port->input[1]->dma_buf_size,
-			port->input[1]->dma_buf_num);
-		io_free(dev->pdev, port->output->vbuf,
-			port->output->pbuf,
-			port->output->dma_buf_size,
-			port->output->dma_buf_num);
-	}
-}
-
-static void ddb_input_start(struct ddb_input *input)
-{
-	struct ddb *dev = input->port->dev;
-
-	spin_lock_irq(&input->lock);
-	input->cbuf = 0;
-	input->coff = 0;
-
-	/* reset */
-	ddbwritel(0, TS_INPUT_CONTROL(input->nr));
-	ddbwritel(2, TS_INPUT_CONTROL(input->nr));
-	ddbwritel(0, TS_INPUT_CONTROL(input->nr));
-
-	ddbwritel((1 << 16) |
-		  (input->dma_buf_num << 11) |
-		  (input->dma_buf_size >> 7),
-		  DMA_BUFFER_SIZE(input->nr));
-	ddbwritel(0, DMA_BUFFER_ACK(input->nr));
-
-	ddbwritel(1, DMA_BASE_WRITE);
-	ddbwritel(3, DMA_BUFFER_CONTROL(input->nr));
-	ddbwritel(9, TS_INPUT_CONTROL(input->nr));
-	input->running = 1;
-	spin_unlock_irq(&input->lock);
-}
-
-static void ddb_input_stop(struct ddb_input *input)
-{
-	struct ddb *dev = input->port->dev;
-
-	spin_lock_irq(&input->lock);
-	ddbwritel(0, TS_INPUT_CONTROL(input->nr));
-	ddbwritel(0, DMA_BUFFER_CONTROL(input->nr));
-	input->running = 0;
-	spin_unlock_irq(&input->lock);
-}
-
-static void ddb_output_start(struct ddb_output *output)
-{
-	struct ddb *dev = output->port->dev;
-
-	spin_lock_irq(&output->lock);
-	output->cbuf = 0;
-	output->coff = 0;
-	ddbwritel(0, TS_OUTPUT_CONTROL(output->nr));
-	ddbwritel(2, TS_OUTPUT_CONTROL(output->nr));
-	ddbwritel(0, TS_OUTPUT_CONTROL(output->nr));
-	ddbwritel(0x3c, TS_OUTPUT_CONTROL(output->nr));
-	ddbwritel((1 << 16) |
-		  (output->dma_buf_num << 11) |
-		  (output->dma_buf_size >> 7),
-		  DMA_BUFFER_SIZE(output->nr + 8));
-	ddbwritel(0, DMA_BUFFER_ACK(output->nr + 8));
-
-	ddbwritel(1, DMA_BASE_READ);
-	ddbwritel(3, DMA_BUFFER_CONTROL(output->nr + 8));
-	/* ddbwritel(0xbd, TS_OUTPUT_CONTROL(output->nr)); */
-	ddbwritel(0x1d, TS_OUTPUT_CONTROL(output->nr));
-	output->running = 1;
-	spin_unlock_irq(&output->lock);
-}
-
-static void ddb_output_stop(struct ddb_output *output)
-{
-	struct ddb *dev = output->port->dev;
-
-	spin_lock_irq(&output->lock);
-	ddbwritel(0, TS_OUTPUT_CONTROL(output->nr));
-	ddbwritel(0, DMA_BUFFER_CONTROL(output->nr + 8));
-	output->running = 0;
-	spin_unlock_irq(&output->lock);
-}
-
-static u32 ddb_output_free(struct ddb_output *output)
-{
-	u32 idx, off, stat = output->stat;
-	s32 diff;
-
-	idx = (stat >> 11) & 0x1f;
-	off = (stat & 0x7ff) << 7;
-
-	if (output->cbuf != idx) {
-		if ((((output->cbuf + 1) % output->dma_buf_num) == idx) &&
-		    (output->dma_buf_size - output->coff <= 188))
-			return 0;
-		return 188;
-	}
-	diff = off - output->coff;
-	if (diff <= 0 || diff > 188)
-		return 188;
-	return 0;
-}
-
-static ssize_t ddb_output_write(struct ddb_output *output,
-				const u8 *buf, size_t count)
-{
-	struct ddb *dev = output->port->dev;
-	u32 idx, off, stat = output->stat;
-	u32 left = count, len;
-
-	idx = (stat >> 11) & 0x1f;
-	off = (stat & 0x7ff) << 7;
-
-	while (left) {
-		len = output->dma_buf_size - output->coff;
-		if ((((output->cbuf + 1) % output->dma_buf_num) == idx) &&
-		    (off == 0)) {
-			if (len <= 188)
-				break;
-			len -= 188;
-		}
-		if (output->cbuf == idx) {
-			if (off > output->coff) {
-#if 1
-				len = off - output->coff;
-				len -= (len % 188);
-				if (len <= 188)
-
-#endif
-					break;
-				len -= 188;
-			}
-		}
-		if (len > left)
-			len = left;
-		if (copy_from_user(output->vbuf[output->cbuf] + output->coff,
-				   buf, len))
-			return -EIO;
-		left -= len;
-		buf += len;
-		output->coff += len;
-		if (output->coff == output->dma_buf_size) {
-			output->coff = 0;
-			output->cbuf = ((output->cbuf + 1) % output->dma_buf_num);
-		}
-		ddbwritel((output->cbuf << 11) | (output->coff >> 7),
-			  DMA_BUFFER_ACK(output->nr + 8));
-	}
-	return count - left;
-}
-
-static u32 ddb_input_avail(struct ddb_input *input)
-{
-	struct ddb *dev = input->port->dev;
-	u32 idx, off, stat = input->stat;
-	u32 ctrl = ddbreadl(DMA_BUFFER_CONTROL(input->nr));
-
-	idx = (stat >> 11) & 0x1f;
-	off = (stat & 0x7ff) << 7;
-
-	if (ctrl & 4) {
-		printk(KERN_ERR "IA %d %d %08x\n", idx, off, ctrl);
-		ddbwritel(input->stat, DMA_BUFFER_ACK(input->nr));
-		return 0;
-	}
-	if (input->cbuf != idx)
-		return 188;
-	return 0;
-}
-
-static ssize_t ddb_input_read(struct ddb_input *input, u8 *buf, size_t count)
-{
-	struct ddb *dev = input->port->dev;
-	u32 left = count;
-	u32 idx, free, stat = input->stat;
-	int ret;
-
-	idx = (stat >> 11) & 0x1f;
-
-	while (left) {
-		if (input->cbuf == idx)
-			return count - left;
-		free = input->dma_buf_size - input->coff;
-		if (free > left)
-			free = left;
-		ret = copy_to_user(buf, input->vbuf[input->cbuf] +
-				   input->coff, free);
-		if (ret)
-			return -EFAULT;
-		input->coff += free;
-		if (input->coff == input->dma_buf_size) {
-			input->coff = 0;
-			input->cbuf = (input->cbuf+1) % input->dma_buf_num;
-		}
-		left -= free;
-		ddbwritel((input->cbuf << 11) | (input->coff >> 7),
-			  DMA_BUFFER_ACK(input->nr));
-	}
-	return count;
-}
-
-/******************************************************************************/
-/******************************************************************************/
-/******************************************************************************/
-
-#if 0
-static struct ddb_input *fe2input(struct ddb *dev, struct dvb_frontend *fe)
-{
-	int i;
-
-	for (i = 0; i < dev->info->port_num * 2; i++) {
-		if (dev->input[i].fe == fe)
-			return &dev->input[i];
-	}
-	return NULL;
-}
-#endif
-
-static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct ddb_input *input = fe->sec_priv;
-	struct ddb_port *port = input->port;
-	int status;
-
-	if (enable) {
-		mutex_lock(&port->i2c_gate_lock);
-		status = input->gate_ctrl(fe, 1);
-	} else {
-		status = input->gate_ctrl(fe, 0);
-		mutex_unlock(&port->i2c_gate_lock);
-	}
-	return status;
-}
-
-static int demod_attach_drxk(struct ddb_input *input)
-{
-	struct i2c_adapter *i2c = &input->port->i2c->adap;
-	struct dvb_frontend *fe;
-	struct drxk_config config;
-
-	memset(&config, 0, sizeof(config));
-	config.microcode_name = "drxk_a3.mc";
-	config.qam_demod_parameter_count = 4;
-	config.adr = 0x29 + (input->nr & 1);
-
-	fe = input->fe = dvb_attach(drxk_attach, &config, i2c);
-	if (!input->fe) {
-		printk(KERN_ERR "No DRXK found!\n");
-		return -ENODEV;
-	}
-	fe->sec_priv = input;
-	input->gate_ctrl = fe->ops.i2c_gate_ctrl;
-	fe->ops.i2c_gate_ctrl = drxk_gate_ctrl;
-	return 0;
-}
-
-static int tuner_attach_tda18271(struct ddb_input *input)
-{
-	struct i2c_adapter *i2c = &input->port->i2c->adap;
-	struct dvb_frontend *fe;
-
-	if (input->fe->ops.i2c_gate_ctrl)
-		input->fe->ops.i2c_gate_ctrl(input->fe, 1);
-	fe = dvb_attach(tda18271c2dd_attach, input->fe, i2c, 0x60);
-	if (!fe) {
-		printk(KERN_ERR "No TDA18271 found!\n");
-		return -ENODEV;
-	}
-	if (input->fe->ops.i2c_gate_ctrl)
-		input->fe->ops.i2c_gate_ctrl(input->fe, 0);
-	return 0;
-}
-
-/******************************************************************************/
-/******************************************************************************/
-/******************************************************************************/
-
-static struct stv090x_config stv0900 = {
-	.device         = STV0900,
-	.demod_mode     = STV090x_DUAL,
-	.clk_mode       = STV090x_CLK_EXT,
-
-	.xtal           = 27000000,
-	.address        = 0x69,
-
-	.ts1_mode       = STV090x_TSMODE_SERIAL_PUNCTURED,
-	.ts2_mode       = STV090x_TSMODE_SERIAL_PUNCTURED,
-
-	.repeater_level = STV090x_RPTLEVEL_16,
-
-	.adc1_range	= STV090x_ADC_1Vpp,
-	.adc2_range	= STV090x_ADC_1Vpp,
-
-	.diseqc_envelope_mode = true,
-};
-
-static struct stv090x_config stv0900_aa = {
-	.device         = STV0900,
-	.demod_mode     = STV090x_DUAL,
-	.clk_mode       = STV090x_CLK_EXT,
-
-	.xtal           = 27000000,
-	.address        = 0x68,
-
-	.ts1_mode       = STV090x_TSMODE_SERIAL_PUNCTURED,
-	.ts2_mode       = STV090x_TSMODE_SERIAL_PUNCTURED,
-
-	.repeater_level = STV090x_RPTLEVEL_16,
-
-	.adc1_range	= STV090x_ADC_1Vpp,
-	.adc2_range	= STV090x_ADC_1Vpp,
-
-	.diseqc_envelope_mode = true,
-};
-
-static struct stv6110x_config stv6110a = {
-	.addr    = 0x60,
-	.refclk	 = 27000000,
-	.clk_div = 1,
-};
-
-static struct stv6110x_config stv6110b = {
-	.addr    = 0x63,
-	.refclk	 = 27000000,
-	.clk_div = 1,
-};
-
-static int demod_attach_stv0900(struct ddb_input *input, int type)
-{
-	struct i2c_adapter *i2c = &input->port->i2c->adap;
-	struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900;
-
-	input->fe = dvb_attach(stv090x_attach, feconf, i2c,
-			       (input->nr & 1) ? STV090x_DEMODULATOR_1
-			       : STV090x_DEMODULATOR_0);
-	if (!input->fe) {
-		printk(KERN_ERR "No STV0900 found!\n");
-		return -ENODEV;
-	}
-	if (!dvb_attach(lnbh24_attach, input->fe, i2c, 0,
-			0, (input->nr & 1) ?
-			(0x09 - type) : (0x0b - type))) {
-		printk(KERN_ERR "No LNBH24 found!\n");
-		return -ENODEV;
-	}
-	return 0;
-}
-
-static int tuner_attach_stv6110(struct ddb_input *input, int type)
-{
-	struct i2c_adapter *i2c = &input->port->i2c->adap;
-	struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900;
-	struct stv6110x_config *tunerconf = (input->nr & 1) ?
-		&stv6110b : &stv6110a;
-	struct stv6110x_devctl *ctl;
-
-	ctl = dvb_attach(stv6110x_attach, input->fe, tunerconf, i2c);
-	if (!ctl) {
-		printk(KERN_ERR "No STV6110X found!\n");
-		return -ENODEV;
-	}
-	printk(KERN_INFO "attach tuner input %d adr %02x\n",
-			 input->nr, tunerconf->addr);
-
-	feconf->tuner_init          = ctl->tuner_init;
-	feconf->tuner_sleep         = ctl->tuner_sleep;
-	feconf->tuner_set_mode      = ctl->tuner_set_mode;
-	feconf->tuner_set_frequency = ctl->tuner_set_frequency;
-	feconf->tuner_get_frequency = ctl->tuner_get_frequency;
-	feconf->tuner_set_bandwidth = ctl->tuner_set_bandwidth;
-	feconf->tuner_get_bandwidth = ctl->tuner_get_bandwidth;
-	feconf->tuner_set_bbgain    = ctl->tuner_set_bbgain;
-	feconf->tuner_get_bbgain    = ctl->tuner_get_bbgain;
-	feconf->tuner_set_refclk    = ctl->tuner_set_refclk;
-	feconf->tuner_get_status    = ctl->tuner_get_status;
-
-	return 0;
-}
-
-static int my_dvb_dmx_ts_card_init(struct dvb_demux *dvbdemux, char *id,
-			    int (*start_feed)(struct dvb_demux_feed *),
-			    int (*stop_feed)(struct dvb_demux_feed *),
-			    void *priv)
-{
-	dvbdemux->priv = priv;
-
-	dvbdemux->filternum = 256;
-	dvbdemux->feednum = 256;
-	dvbdemux->start_feed = start_feed;
-	dvbdemux->stop_feed = stop_feed;
-	dvbdemux->write_to_decoder = NULL;
-	dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
-				      DMX_SECTION_FILTERING |
-				      DMX_MEMORY_BASED_FILTERING);
-	return dvb_dmx_init(dvbdemux);
-}
-
-static int my_dvb_dmxdev_ts_card_init(struct dmxdev *dmxdev,
-			       struct dvb_demux *dvbdemux,
-			       struct dmx_frontend *hw_frontend,
-			       struct dmx_frontend *mem_frontend,
-			       struct dvb_adapter *dvb_adapter)
-{
-	int ret;
-
-	dmxdev->filternum = 256;
-	dmxdev->demux = &dvbdemux->dmx;
-	dmxdev->capabilities = 0;
-	ret = dvb_dmxdev_init(dmxdev, dvb_adapter);
-	if (ret < 0)
-		return ret;
-
-	hw_frontend->source = DMX_FRONTEND_0;
-	dvbdemux->dmx.add_frontend(&dvbdemux->dmx, hw_frontend);
-	mem_frontend->source = DMX_MEMORY_FE;
-	dvbdemux->dmx.add_frontend(&dvbdemux->dmx, mem_frontend);
-	return dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, hw_frontend);
-}
-
-static int start_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
-	struct ddb_input *input = dvbdmx->priv;
-
-	if (!input->users)
-		ddb_input_start(input);
-
-	return ++input->users;
-}
-
-static int stop_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
-	struct ddb_input *input = dvbdmx->priv;
-
-	if (--input->users)
-		return input->users;
-
-	ddb_input_stop(input);
-	return 0;
-}
-
-
-static void dvb_input_detach(struct ddb_input *input)
-{
-	struct dvb_adapter *adap = &input->adap;
-	struct dvb_demux *dvbdemux = &input->demux;
-
-	switch (input->attached) {
-	case 5:
-		if (input->fe2)
-			dvb_unregister_frontend(input->fe2);
-		if (input->fe) {
-			dvb_unregister_frontend(input->fe);
-			dvb_frontend_detach(input->fe);
-			input->fe = NULL;
-		}
-	case 4:
-		dvb_net_release(&input->dvbnet);
-
-	case 3:
-		dvbdemux->dmx.close(&dvbdemux->dmx);
-		dvbdemux->dmx.remove_frontend(&dvbdemux->dmx,
-					      &input->hw_frontend);
-		dvbdemux->dmx.remove_frontend(&dvbdemux->dmx,
-					      &input->mem_frontend);
-		dvb_dmxdev_release(&input->dmxdev);
-
-	case 2:
-		dvb_dmx_release(&input->demux);
-
-	case 1:
-		dvb_unregister_adapter(adap);
-	}
-	input->attached = 0;
-}
-
-static int dvb_input_attach(struct ddb_input *input)
-{
-	int ret;
-	struct ddb_port *port = input->port;
-	struct dvb_adapter *adap = &input->adap;
-	struct dvb_demux *dvbdemux = &input->demux;
-
-	ret = dvb_register_adapter(adap, "DDBridge", THIS_MODULE,
-				   &input->port->dev->pdev->dev,
-				   adapter_nr);
-	if (ret < 0) {
-		printk(KERN_ERR "ddbridge: Could not register adapter."
-		       "Check if you enabled enough adapters in dvb-core!\n");
-		return ret;
-	}
-	input->attached = 1;
-
-	ret = my_dvb_dmx_ts_card_init(dvbdemux, "SW demux",
-				      start_feed,
-				      stop_feed, input);
-	if (ret < 0)
-		return ret;
-	input->attached = 2;
-
-	ret = my_dvb_dmxdev_ts_card_init(&input->dmxdev, &input->demux,
-					 &input->hw_frontend,
-					 &input->mem_frontend, adap);
-	if (ret < 0)
-		return ret;
-	input->attached = 3;
-
-	ret = dvb_net_init(adap, &input->dvbnet, input->dmxdev.demux);
-	if (ret < 0)
-		return ret;
-	input->attached = 4;
-
-	input->fe = 0;
-	switch (port->type) {
-	case DDB_TUNER_DVBS_ST:
-		if (demod_attach_stv0900(input, 0) < 0)
-			return -ENODEV;
-		if (tuner_attach_stv6110(input, 0) < 0)
-			return -ENODEV;
-		if (input->fe) {
-			if (dvb_register_frontend(adap, input->fe) < 0)
-				return -ENODEV;
-		}
-		break;
-	case DDB_TUNER_DVBS_ST_AA:
-		if (demod_attach_stv0900(input, 1) < 0)
-			return -ENODEV;
-		if (tuner_attach_stv6110(input, 1) < 0)
-			return -ENODEV;
-		if (input->fe) {
-			if (dvb_register_frontend(adap, input->fe) < 0)
-				return -ENODEV;
-		}
-		break;
-	case DDB_TUNER_DVBCT_TR:
-		if (demod_attach_drxk(input) < 0)
-			return -ENODEV;
-		if (tuner_attach_tda18271(input) < 0)
-			return -ENODEV;
-		if (input->fe) {
-			if (dvb_register_frontend(adap, input->fe) < 0)
-				return -ENODEV;
-		}
-		if (input->fe2) {
-			if (dvb_register_frontend(adap, input->fe2) < 0)
-				return -ENODEV;
-			input->fe2->tuner_priv = input->fe->tuner_priv;
-			memcpy(&input->fe2->ops.tuner_ops,
-			       &input->fe->ops.tuner_ops,
-			       sizeof(struct dvb_tuner_ops));
-		}
-		break;
-	}
-	input->attached = 5;
-	return 0;
-}
-
-/****************************************************************************/
-/****************************************************************************/
-
-static ssize_t ts_write(struct file *file, const char *buf,
-			size_t count, loff_t *ppos)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct ddb_output *output = dvbdev->priv;
-	size_t left = count;
-	int stat;
-
-	while (left) {
-		if (ddb_output_free(output) < 188) {
-			if (file->f_flags & O_NONBLOCK)
-				break;
-			if (wait_event_interruptible(
-				    output->wq, ddb_output_free(output) >= 188) < 0)
-				break;
-		}
-		stat = ddb_output_write(output, buf, left);
-		if (stat < 0)
-			break;
-		buf += stat;
-		left -= stat;
-	}
-	return (left == count) ? -EAGAIN : (count - left);
-}
-
-static ssize_t ts_read(struct file *file, char *buf,
-		       size_t count, loff_t *ppos)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct ddb_output *output = dvbdev->priv;
-	struct ddb_input *input = output->port->input[0];
-	int left, read;
-
-	count -= count % 188;
-	left = count;
-	while (left) {
-		if (ddb_input_avail(input) < 188) {
-			if (file->f_flags & O_NONBLOCK)
-				break;
-			if (wait_event_interruptible(
-				    input->wq, ddb_input_avail(input) >= 188) < 0)
-				break;
-		}
-		read = ddb_input_read(input, buf, left);
-		if (read < 0)
-			return read;
-		left -= read;
-		buf += read;
-	}
-	return (left == count) ? -EAGAIN : (count - left);
-}
-
-static unsigned int ts_poll(struct file *file, poll_table *wait)
-{
-	/*
-	struct dvb_device *dvbdev = file->private_data;
-	struct ddb_output *output = dvbdev->priv;
-	struct ddb_input *input = output->port->input[0];
-	*/
-	unsigned int mask = 0;
-
-#if 0
-	if (data_avail_to_read)
-		mask |= POLLIN | POLLRDNORM;
-	if (data_avail_to_write)
-		mask |= POLLOUT | POLLWRNORM;
-
-	poll_wait(file, &read_queue, wait);
-	poll_wait(file, &write_queue, wait);
-#endif
-	return mask;
-}
-
-static const struct file_operations ci_fops = {
-	.owner   = THIS_MODULE,
-	.read    = ts_read,
-	.write   = ts_write,
-	.open    = dvb_generic_open,
-	.release = dvb_generic_release,
-	.poll    = ts_poll,
-	.mmap    = 0,
-};
-
-static struct dvb_device dvbdev_ci = {
-	.priv    = 0,
-	.readers = -1,
-	.writers = -1,
-	.users   = -1,
-	.fops    = &ci_fops,
-};
-
-/****************************************************************************/
-/****************************************************************************/
-/****************************************************************************/
-
-static void input_tasklet(unsigned long data)
-{
-	struct ddb_input *input = (struct ddb_input *) data;
-	struct ddb *dev = input->port->dev;
-
-	spin_lock(&input->lock);
-	if (!input->running) {
-		spin_unlock(&input->lock);
-		return;
-	}
-	input->stat = ddbreadl(DMA_BUFFER_CURRENT(input->nr));
-
-	if (input->port->class == DDB_PORT_TUNER) {
-		if (4&ddbreadl(DMA_BUFFER_CONTROL(input->nr)))
-			printk(KERN_ERR "Overflow input %d\n", input->nr);
-		while (input->cbuf != ((input->stat >> 11) & 0x1f)
-		       || (4&ddbreadl(DMA_BUFFER_CONTROL(input->nr)))) {
-			dvb_dmx_swfilter_packets(&input->demux,
-						 input->vbuf[input->cbuf],
-						 input->dma_buf_size / 188);
-
-			input->cbuf = (input->cbuf + 1) % input->dma_buf_num;
-			ddbwritel((input->cbuf << 11),
-				  DMA_BUFFER_ACK(input->nr));
-			input->stat = ddbreadl(DMA_BUFFER_CURRENT(input->nr));
-		       }
-	}
-	if (input->port->class == DDB_PORT_CI)
-		wake_up(&input->wq);
-	spin_unlock(&input->lock);
-}
-
-static void output_tasklet(unsigned long data)
-{
-	struct ddb_output *output = (struct ddb_output *) data;
-	struct ddb *dev = output->port->dev;
-
-	spin_lock(&output->lock);
-	if (!output->running) {
-		spin_unlock(&output->lock);
-		return;
-	}
-	output->stat = ddbreadl(DMA_BUFFER_CURRENT(output->nr + 8));
-	wake_up(&output->wq);
-	spin_unlock(&output->lock);
-}
-
-
-struct cxd2099_cfg cxd_cfg = {
-	.bitrate =  62000,
-	.adr     =  0x40,
-	.polarity = 1,
-	.clock_mode = 1,
-};
-
-static int ddb_ci_attach(struct ddb_port *port)
-{
-	int ret;
-
-	ret = dvb_register_adapter(&port->output->adap,
-				   "DDBridge",
-				   THIS_MODULE,
-				   &port->dev->pdev->dev,
-				   adapter_nr);
-	if (ret < 0)
-		return ret;
-	port->en = cxd2099_attach(&cxd_cfg, port, &port->i2c->adap);
-	if (!port->en) {
-		dvb_unregister_adapter(&port->output->adap);
-		return -ENODEV;
-	}
-	ddb_input_start(port->input[0]);
-	ddb_output_start(port->output);
-	dvb_ca_en50221_init(&port->output->adap,
-			    port->en, 0, 1);
-	ret = dvb_register_device(&port->output->adap, &port->output->dev,
-				  &dvbdev_ci, (void *) port->output,
-				  DVB_DEVICE_SEC);
-	return ret;
-}
-
-static int ddb_port_attach(struct ddb_port *port)
-{
-	int ret = 0;
-
-	switch (port->class) {
-	case DDB_PORT_TUNER:
-		ret = dvb_input_attach(port->input[0]);
-		if (ret < 0)
-			break;
-		ret = dvb_input_attach(port->input[1]);
-		break;
-	case DDB_PORT_CI:
-		ret = ddb_ci_attach(port);
-		break;
-	default:
-		break;
-	}
-	if (ret < 0)
-		printk(KERN_ERR "port_attach on port %d failed\n", port->nr);
-	return ret;
-}
-
-static int ddb_ports_attach(struct ddb *dev)
-{
-	int i, ret = 0;
-	struct ddb_port *port;
-
-	for (i = 0; i < dev->info->port_num; i++) {
-		port = &dev->port[i];
-		ret = ddb_port_attach(port);
-		if (ret < 0)
-			break;
-	}
-	return ret;
-}
-
-static void ddb_ports_detach(struct ddb *dev)
-{
-	int i;
-	struct ddb_port *port;
-
-	for (i = 0; i < dev->info->port_num; i++) {
-		port = &dev->port[i];
-		switch (port->class) {
-		case DDB_PORT_TUNER:
-			dvb_input_detach(port->input[0]);
-			dvb_input_detach(port->input[1]);
-			break;
-		case DDB_PORT_CI:
-			if (port->output->dev)
-				dvb_unregister_device(port->output->dev);
-			if (port->en) {
-				ddb_input_stop(port->input[0]);
-				ddb_output_stop(port->output);
-				dvb_ca_en50221_release(port->en);
-				kfree(port->en);
-				port->en = 0;
-				dvb_unregister_adapter(&port->output->adap);
-			}
-			break;
-		}
-	}
-}
-
-/****************************************************************************/
-/****************************************************************************/
-
-static int port_has_ci(struct ddb_port *port)
-{
-	u8 val;
-	return i2c_read_reg(&port->i2c->adap, 0x40, 0, &val) ? 0 : 1;
-}
-
-static int port_has_stv0900(struct ddb_port *port)
-{
-	u8 val;
-	if (i2c_read_reg16(&port->i2c->adap, 0x69, 0xf100, &val) < 0)
-		return 0;
-	return 1;
-}
-
-static int port_has_stv0900_aa(struct ddb_port *port)
-{
-	u8 val;
-	if (i2c_read_reg16(&port->i2c->adap, 0x68, 0xf100, &val) < 0)
-		return 0;
-	return 1;
-}
-
-static int port_has_drxks(struct ddb_port *port)
-{
-	u8 val;
-	if (i2c_read(&port->i2c->adap, 0x29, &val) < 0)
-		return 0;
-	if (i2c_read(&port->i2c->adap, 0x2a, &val) < 0)
-		return 0;
-	return 1;
-}
-
-static void ddb_port_probe(struct ddb_port *port)
-{
-	struct ddb *dev = port->dev;
-	char *modname = "NO MODULE";
-
-	port->class = DDB_PORT_NONE;
-
-	if (port_has_ci(port)) {
-		modname = "CI";
-		port->class = DDB_PORT_CI;
-		ddbwritel(I2C_SPEED_400, port->i2c->regs + I2C_TIMING);
-	} else if (port_has_stv0900(port)) {
-		modname = "DUAL DVB-S2";
-		port->class = DDB_PORT_TUNER;
-		port->type = DDB_TUNER_DVBS_ST;
-		ddbwritel(I2C_SPEED_100, port->i2c->regs + I2C_TIMING);
-	} else if (port_has_stv0900_aa(port)) {
-		modname = "DUAL DVB-S2";
-		port->class = DDB_PORT_TUNER;
-		port->type = DDB_TUNER_DVBS_ST_AA;
-		ddbwritel(I2C_SPEED_100, port->i2c->regs + I2C_TIMING);
-	} else if (port_has_drxks(port)) {
-		modname = "DUAL DVB-C/T";
-		port->class = DDB_PORT_TUNER;
-		port->type = DDB_TUNER_DVBCT_TR;
-		ddbwritel(I2C_SPEED_400, port->i2c->regs + I2C_TIMING);
-	}
-	printk(KERN_INFO "Port %d (TAB %d): %s\n",
-			 port->nr, port->nr+1, modname);
-}
-
-static void ddb_input_init(struct ddb_port *port, int nr)
-{
-	struct ddb *dev = port->dev;
-	struct ddb_input *input = &dev->input[nr];
-
-	input->nr = nr;
-	input->port = port;
-	input->dma_buf_num = INPUT_DMA_BUFS;
-	input->dma_buf_size = INPUT_DMA_SIZE;
-	ddbwritel(0, TS_INPUT_CONTROL(nr));
-	ddbwritel(2, TS_INPUT_CONTROL(nr));
-	ddbwritel(0, TS_INPUT_CONTROL(nr));
-	ddbwritel(0, DMA_BUFFER_ACK(nr));
-	tasklet_init(&input->tasklet, input_tasklet, (unsigned long) input);
-	spin_lock_init(&input->lock);
-	init_waitqueue_head(&input->wq);
-}
-
-static void ddb_output_init(struct ddb_port *port, int nr)
-{
-	struct ddb *dev = port->dev;
-	struct ddb_output *output = &dev->output[nr];
-	output->nr = nr;
-	output->port = port;
-	output->dma_buf_num = OUTPUT_DMA_BUFS;
-	output->dma_buf_size = OUTPUT_DMA_SIZE;
-
-	ddbwritel(0, TS_OUTPUT_CONTROL(nr));
-	ddbwritel(2, TS_OUTPUT_CONTROL(nr));
-	ddbwritel(0, TS_OUTPUT_CONTROL(nr));
-	tasklet_init(&output->tasklet, output_tasklet, (unsigned long) output);
-	init_waitqueue_head(&output->wq);
-}
-
-static void ddb_ports_init(struct ddb *dev)
-{
-	int i;
-	struct ddb_port *port;
-
-	for (i = 0; i < dev->info->port_num; i++) {
-		port = &dev->port[i];
-		port->dev = dev;
-		port->nr = i;
-		port->i2c = &dev->i2c[i];
-		port->input[0] = &dev->input[2 * i];
-		port->input[1] = &dev->input[2 * i + 1];
-		port->output = &dev->output[i];
-
-		mutex_init(&port->i2c_gate_lock);
-		ddb_port_probe(port);
-		ddb_input_init(port, 2 * i);
-		ddb_input_init(port, 2 * i + 1);
-		ddb_output_init(port, i);
-	}
-}
-
-static void ddb_ports_release(struct ddb *dev)
-{
-	int i;
-	struct ddb_port *port;
-
-	for (i = 0; i < dev->info->port_num; i++) {
-		port = &dev->port[i];
-		port->dev = dev;
-		tasklet_kill(&port->input[0]->tasklet);
-		tasklet_kill(&port->input[1]->tasklet);
-		tasklet_kill(&port->output->tasklet);
-	}
-}
-
-/****************************************************************************/
-/****************************************************************************/
-/****************************************************************************/
-
-static void irq_handle_i2c(struct ddb *dev, int n)
-{
-	struct ddb_i2c *i2c = &dev->i2c[n];
-
-	i2c->done = 1;
-	wake_up(&i2c->wq);
-}
-
-static irqreturn_t irq_handler(int irq, void *dev_id)
-{
-	struct ddb *dev = (struct ddb *) dev_id;
-	u32 s = ddbreadl(INTERRUPT_STATUS);
-
-	if (!s)
-		return IRQ_NONE;
-
-	do {
-		ddbwritel(s, INTERRUPT_ACK);
-
-		if (s & 0x00000001)
-			irq_handle_i2c(dev, 0);
-		if (s & 0x00000002)
-			irq_handle_i2c(dev, 1);
-		if (s & 0x00000004)
-			irq_handle_i2c(dev, 2);
-		if (s & 0x00000008)
-			irq_handle_i2c(dev, 3);
-
-		if (s & 0x00000100)
-			tasklet_schedule(&dev->input[0].tasklet);
-		if (s & 0x00000200)
-			tasklet_schedule(&dev->input[1].tasklet);
-		if (s & 0x00000400)
-			tasklet_schedule(&dev->input[2].tasklet);
-		if (s & 0x00000800)
-			tasklet_schedule(&dev->input[3].tasklet);
-		if (s & 0x00001000)
-			tasklet_schedule(&dev->input[4].tasklet);
-		if (s & 0x00002000)
-			tasklet_schedule(&dev->input[5].tasklet);
-		if (s & 0x00004000)
-			tasklet_schedule(&dev->input[6].tasklet);
-		if (s & 0x00008000)
-			tasklet_schedule(&dev->input[7].tasklet);
-
-		if (s & 0x00010000)
-			tasklet_schedule(&dev->output[0].tasklet);
-		if (s & 0x00020000)
-			tasklet_schedule(&dev->output[1].tasklet);
-		if (s & 0x00040000)
-			tasklet_schedule(&dev->output[2].tasklet);
-		if (s & 0x00080000)
-			tasklet_schedule(&dev->output[3].tasklet);
-
-		/* if (s & 0x000f0000)	printk(KERN_DEBUG "%08x\n", istat); */
-	} while ((s = ddbreadl(INTERRUPT_STATUS)));
-
-	return IRQ_HANDLED;
-}
-
-/******************************************************************************/
-/******************************************************************************/
-/******************************************************************************/
-
-static int flashio(struct ddb *dev, u8 *wbuf, u32 wlen, u8 *rbuf, u32 rlen)
-{
-	u32 data, shift;
-
-	if (wlen > 4)
-		ddbwritel(1, SPI_CONTROL);
-	while (wlen > 4) {
-		/* FIXME: check for big-endian */
-		data = swab32(*(u32 *)wbuf);
-		wbuf += 4;
-		wlen -= 4;
-		ddbwritel(data, SPI_DATA);
-		while (ddbreadl(SPI_CONTROL) & 0x0004)
-			;
-	}
-
-	if (rlen)
-		ddbwritel(0x0001 | ((wlen << (8 + 3)) & 0x1f00), SPI_CONTROL);
-	else
-		ddbwritel(0x0003 | ((wlen << (8 + 3)) & 0x1f00), SPI_CONTROL);
-
-	data = 0;
-	shift = ((4 - wlen) * 8);
-	while (wlen) {
-		data <<= 8;
-		data |= *wbuf;
-		wlen--;
-		wbuf++;
-	}
-	if (shift)
-		data <<= shift;
-	ddbwritel(data, SPI_DATA);
-	while (ddbreadl(SPI_CONTROL) & 0x0004)
-		;
-
-	if (!rlen) {
-		ddbwritel(0, SPI_CONTROL);
-		return 0;
-	}
-	if (rlen > 4)
-		ddbwritel(1, SPI_CONTROL);
-
-	while (rlen > 4) {
-		ddbwritel(0xffffffff, SPI_DATA);
-		while (ddbreadl(SPI_CONTROL) & 0x0004)
-			;
-		data = ddbreadl(SPI_DATA);
-		*(u32 *) rbuf = swab32(data);
-		rbuf += 4;
-		rlen -= 4;
-	}
-	ddbwritel(0x0003 | ((rlen << (8 + 3)) & 0x1F00), SPI_CONTROL);
-	ddbwritel(0xffffffff, SPI_DATA);
-	while (ddbreadl(SPI_CONTROL) & 0x0004)
-		;
-
-	data = ddbreadl(SPI_DATA);
-	ddbwritel(0, SPI_CONTROL);
-
-	if (rlen < 4)
-		data <<= ((4 - rlen) * 8);
-
-	while (rlen > 0) {
-		*rbuf = ((data >> 24) & 0xff);
-		data <<= 8;
-		rbuf++;
-		rlen--;
-	}
-	return 0;
-}
-
-#define DDB_MAGIC 'd'
-
-struct ddb_flashio {
-	__u8 *write_buf;
-	__u32 write_len;
-	__u8 *read_buf;
-	__u32 read_len;
-};
-
-#define IOCTL_DDB_FLASHIO  _IOWR(DDB_MAGIC, 0x00, struct ddb_flashio)
-
-#define DDB_NAME "ddbridge"
-
-static u32 ddb_num;
-static struct ddb *ddbs[32];
-static struct class *ddb_class;
-static int ddb_major;
-
-static int ddb_open(struct inode *inode, struct file *file)
-{
-	struct ddb *dev = ddbs[iminor(inode)];
-
-	file->private_data = dev;
-	return 0;
-}
-
-static long ddb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	struct ddb *dev = file->private_data;
-	void *parg = (void *)arg;
-	int res;
-
-	switch (cmd) {
-	case IOCTL_DDB_FLASHIO:
-	{
-		struct ddb_flashio fio;
-		u8 *rbuf, *wbuf;
-
-		if (copy_from_user(&fio, parg, sizeof(fio)))
-			return -EFAULT;
-
-		if (fio.write_len > 1028 || fio.read_len > 1028)
-			return -EINVAL;
-		if (fio.write_len + fio.read_len > 1028)
-			return -EINVAL;
-
-		wbuf = &dev->iobuf[0];
-		rbuf = wbuf + fio.write_len;
-
-		if (copy_from_user(wbuf, fio.write_buf, fio.write_len))
-			return -EFAULT;
-		res = flashio(dev, wbuf, fio.write_len, rbuf, fio.read_len);
-		if (res)
-			return res;
-		if (copy_to_user(fio.read_buf, rbuf, fio.read_len))
-			return -EFAULT;
-		break;
-	}
-	default:
-		return -ENOTTY;
-	}
-	return 0;
-}
-
-static const struct file_operations ddb_fops = {
-	.unlocked_ioctl = ddb_ioctl,
-	.open           = ddb_open,
-};
-
-static char *ddb_devnode(struct device *device, umode_t *mode)
-{
-	struct ddb *dev = dev_get_drvdata(device);
-
-	return kasprintf(GFP_KERNEL, "ddbridge/card%d", dev->nr);
-}
-
-static int ddb_class_create(void)
-{
-	ddb_major = register_chrdev(0, DDB_NAME, &ddb_fops);
-	if (ddb_major < 0)
-		return ddb_major;
-
-	ddb_class = class_create(THIS_MODULE, DDB_NAME);
-	if (IS_ERR(ddb_class)) {
-		unregister_chrdev(ddb_major, DDB_NAME);
-		return -1;
-	}
-	ddb_class->devnode = ddb_devnode;
-	return 0;
-}
-
-static void ddb_class_destroy(void)
-{
-	class_destroy(ddb_class);
-	unregister_chrdev(ddb_major, DDB_NAME);
-}
-
-static int ddb_device_create(struct ddb *dev)
-{
-	dev->nr = ddb_num++;
-	dev->ddb_dev = device_create(ddb_class, NULL,
-				     MKDEV(ddb_major, dev->nr),
-				     dev, "ddbridge%d", dev->nr);
-	ddbs[dev->nr] = dev;
-	if (IS_ERR(dev->ddb_dev))
-		return -1;
-	return 0;
-}
-
-static void ddb_device_destroy(struct ddb *dev)
-{
-	ddb_num--;
-	if (IS_ERR(dev->ddb_dev))
-		return;
-	device_destroy(ddb_class, MKDEV(ddb_major, 0));
-}
-
-
-/****************************************************************************/
-/****************************************************************************/
-/****************************************************************************/
-
-static void ddb_unmap(struct ddb *dev)
-{
-	if (dev->regs)
-		iounmap(dev->regs);
-	vfree(dev);
-}
-
-
-static void __devexit ddb_remove(struct pci_dev *pdev)
-{
-	struct ddb *dev = (struct ddb *) pci_get_drvdata(pdev);
-
-	ddb_ports_detach(dev);
-	ddb_i2c_release(dev);
-
-	ddbwritel(0, INTERRUPT_ENABLE);
-	free_irq(dev->pdev->irq, dev);
-#ifdef CONFIG_PCI_MSI
-	if (dev->msi)
-		pci_disable_msi(dev->pdev);
-#endif
-	ddb_ports_release(dev);
-	ddb_buffers_free(dev);
-	ddb_device_destroy(dev);
-
-	ddb_unmap(dev);
-	pci_set_drvdata(pdev, 0);
-	pci_disable_device(pdev);
-}
-
-
-static int __devinit ddb_probe(struct pci_dev *pdev,
-			       const struct pci_device_id *id)
-{
-	struct ddb *dev;
-	int stat = 0;
-	int irq_flag = IRQF_SHARED;
-
-	if (pci_enable_device(pdev) < 0)
-		return -ENODEV;
-
-	dev = vmalloc(sizeof(struct ddb));
-	if (dev == NULL)
-		return -ENOMEM;
-	memset(dev, 0, sizeof(struct ddb));
-
-	dev->pdev = pdev;
-	pci_set_drvdata(pdev, dev);
-	dev->info = (struct ddb_info *) id->driver_data;
-	printk(KERN_INFO "DDBridge driver detected: %s\n", dev->info->name);
-
-	dev->regs = ioremap(pci_resource_start(dev->pdev, 0),
-			    pci_resource_len(dev->pdev, 0));
-	if (!dev->regs) {
-		stat = -ENOMEM;
-		goto fail;
-	}
-	printk(KERN_INFO "HW %08x FW %08x\n", ddbreadl(0), ddbreadl(4));
-
-#ifdef CONFIG_PCI_MSI
-	if (pci_msi_enabled())
-		stat = pci_enable_msi(dev->pdev);
-	if (stat) {
-		printk(KERN_INFO ": MSI not available.\n");
-	} else {
-		irq_flag = 0;
-		dev->msi = 1;
-	}
-#endif
-	stat = request_irq(dev->pdev->irq, irq_handler,
-			   irq_flag, "DDBridge", (void *) dev);
-	if (stat < 0)
-		goto fail1;
-	ddbwritel(0, DMA_BASE_WRITE);
-	ddbwritel(0, DMA_BASE_READ);
-	ddbwritel(0xffffffff, INTERRUPT_ACK);
-	ddbwritel(0xfff0f, INTERRUPT_ENABLE);
-	ddbwritel(0, MSI1_ENABLE);
-
-	if (ddb_i2c_init(dev) < 0)
-		goto fail1;
-	ddb_ports_init(dev);
-	if (ddb_buffers_alloc(dev) < 0) {
-		printk(KERN_INFO ": Could not allocate buffer memory\n");
-		goto fail2;
-	}
-	if (ddb_ports_attach(dev) < 0)
-		goto fail3;
-	ddb_device_create(dev);
-	return 0;
-
-fail3:
-	ddb_ports_detach(dev);
-	printk(KERN_ERR "fail3\n");
-	ddb_ports_release(dev);
-fail2:
-	printk(KERN_ERR "fail2\n");
-	ddb_buffers_free(dev);
-fail1:
-	printk(KERN_ERR "fail1\n");
-	if (dev->msi)
-		pci_disable_msi(dev->pdev);
-	free_irq(dev->pdev->irq, dev);
-fail:
-	printk(KERN_ERR "fail\n");
-	ddb_unmap(dev);
-	pci_set_drvdata(pdev, 0);
-	pci_disable_device(pdev);
-	return -1;
-}
-
-/******************************************************************************/
-/******************************************************************************/
-/******************************************************************************/
-
-static struct ddb_info ddb_none = {
-	.type     = DDB_NONE,
-	.name     = "Digital Devices PCIe bridge",
-};
-
-static struct ddb_info ddb_octopus = {
-	.type     = DDB_OCTOPUS,
-	.name     = "Digital Devices Octopus DVB adapter",
-	.port_num = 4,
-};
-
-static struct ddb_info ddb_octopus_le = {
-	.type     = DDB_OCTOPUS,
-	.name     = "Digital Devices Octopus LE DVB adapter",
-	.port_num = 2,
-};
-
-static struct ddb_info ddb_v6 = {
-	.type     = DDB_OCTOPUS,
-	.name     = "Digital Devices Cine S2 V6 DVB adapter",
-	.port_num = 3,
-};
-
-#define DDVID 0xdd01 /* Digital Devices Vendor ID */
-
-#define DDB_ID(_vend, _dev, _subvend, _subdev, _driverdata) {	\
-	.vendor      = _vend,    .device    = _dev, \
-	.subvendor   = _subvend, .subdevice = _subdev, \
-	.driver_data = (unsigned long)&_driverdata }
-
-static const struct pci_device_id ddb_id_tbl[] __devinitdata = {
-	DDB_ID(DDVID, 0x0002, DDVID, 0x0001, ddb_octopus),
-	DDB_ID(DDVID, 0x0003, DDVID, 0x0001, ddb_octopus),
-	DDB_ID(DDVID, 0x0003, DDVID, 0x0002, ddb_octopus_le),
-	DDB_ID(DDVID, 0x0003, DDVID, 0x0010, ddb_octopus),
-	DDB_ID(DDVID, 0x0003, DDVID, 0x0020, ddb_v6),
-	/* in case sub-ids got deleted in flash */
-	DDB_ID(DDVID, 0x0003, PCI_ANY_ID, PCI_ANY_ID, ddb_none),
-	{0}
-};
-MODULE_DEVICE_TABLE(pci, ddb_id_tbl);
-
-
-static struct pci_driver ddb_pci_driver = {
-	.name        = "DDBridge",
-	.id_table    = ddb_id_tbl,
-	.probe       = ddb_probe,
-	.remove      = __devexit_p(ddb_remove),
-};
-
-static __init int module_init_ddbridge(void)
-{
-	printk(KERN_INFO "Digital Devices PCIE bridge driver, "
-	       "Copyright (C) 2010-11 Digital Devices GmbH\n");
-	if (ddb_class_create())
-		return -1;
-	return pci_register_driver(&ddb_pci_driver);
-}
-
-static __exit void module_exit_ddbridge(void)
-{
-	pci_unregister_driver(&ddb_pci_driver);
-	ddb_class_destroy();
-}
-
-module_init(module_init_ddbridge);
-module_exit(module_exit_ddbridge);
-
-MODULE_DESCRIPTION("Digital Devices PCIe Bridge");
-MODULE_AUTHOR("Ralph Metzler");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("0.5");
diff --git a/drivers/media/dvb/ddbridge/ddbridge-regs.h b/drivers/media/dvb/ddbridge/ddbridge-regs.h
deleted file mode 100644
index a3ccb31..0000000
--- a/drivers/media/dvb/ddbridge/ddbridge-regs.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * ddbridge-regs.h: Digital Devices PCIe bridge driver
- *
- * Copyright (C) 2010-2011 Digital Devices GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 only, as published by the Free Software Foundation.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- */
-
-/* DD-DVBBridgeV1.h 273 2010-09-17 05:03:16Z manfred */
-
-/* Register Definitions */
-
-#define CUR_REGISTERMAP_VERSION 0x10000
-
-#define HARDWARE_VERSION       0x00
-#define REGISTERMAP_VERSION    0x04
-
-/* ------------------------------------------------------------------------- */
-/* SPI Controller */
-
-#define SPI_CONTROL     0x10
-#define SPI_DATA        0x14
-
-/* ------------------------------------------------------------------------- */
-
-/* Interrupt controller                                     */
-/* How many MSI's are available depends on HW (Min 2 max 8) */
-/* How many are usable also depends on Host platform        */
-
-#define INTERRUPT_BASE   (0x40)
-
-#define INTERRUPT_ENABLE (INTERRUPT_BASE + 0x00)
-#define MSI0_ENABLE      (INTERRUPT_BASE + 0x00)
-#define MSI1_ENABLE      (INTERRUPT_BASE + 0x04)
-#define MSI2_ENABLE      (INTERRUPT_BASE + 0x08)
-#define MSI3_ENABLE      (INTERRUPT_BASE + 0x0C)
-#define MSI4_ENABLE      (INTERRUPT_BASE + 0x10)
-#define MSI5_ENABLE      (INTERRUPT_BASE + 0x14)
-#define MSI6_ENABLE      (INTERRUPT_BASE + 0x18)
-#define MSI7_ENABLE      (INTERRUPT_BASE + 0x1C)
-
-#define INTERRUPT_STATUS (INTERRUPT_BASE + 0x20)
-#define INTERRUPT_ACK    (INTERRUPT_BASE + 0x20)
-
-#define INTMASK_I2C1        (0x00000001)
-#define INTMASK_I2C2        (0x00000002)
-#define INTMASK_I2C3        (0x00000004)
-#define INTMASK_I2C4        (0x00000008)
-
-#define INTMASK_CIRQ1       (0x00000010)
-#define INTMASK_CIRQ2       (0x00000020)
-#define INTMASK_CIRQ3       (0x00000040)
-#define INTMASK_CIRQ4       (0x00000080)
-
-#define INTMASK_TSINPUT1    (0x00000100)
-#define INTMASK_TSINPUT2    (0x00000200)
-#define INTMASK_TSINPUT3    (0x00000400)
-#define INTMASK_TSINPUT4    (0x00000800)
-#define INTMASK_TSINPUT5    (0x00001000)
-#define INTMASK_TSINPUT6    (0x00002000)
-#define INTMASK_TSINPUT7    (0x00004000)
-#define INTMASK_TSINPUT8    (0x00008000)
-
-#define INTMASK_TSOUTPUT1   (0x00010000)
-#define INTMASK_TSOUTPUT2   (0x00020000)
-#define INTMASK_TSOUTPUT3   (0x00040000)
-#define INTMASK_TSOUTPUT4   (0x00080000)
-
-/* ------------------------------------------------------------------------- */
-/* I2C Master Controller */
-
-#define I2C_BASE        (0x80)  /* Byte offset */
-
-#define I2C_COMMAND     (0x00)
-#define I2C_TIMING      (0x04)
-#define I2C_TASKLENGTH  (0x08)     /* High read, low write */
-#define I2C_TASKADDRESS (0x0C)     /* High read, low write */
-
-#define I2C_MONITOR     (0x1C)
-
-#define I2C_BASE_1      (I2C_BASE + 0x00)
-#define I2C_BASE_2      (I2C_BASE + 0x20)
-#define I2C_BASE_3      (I2C_BASE + 0x40)
-#define I2C_BASE_4      (I2C_BASE + 0x60)
-
-#define I2C_BASE_N(i)   (I2C_BASE + (i) * 0x20)
-
-#define I2C_TASKMEM_BASE    (0x1000)    /* Byte offset */
-#define I2C_TASKMEM_SIZE    (0x1000)
-
-#define I2C_SPEED_400   (0x04030404)
-#define I2C_SPEED_200   (0x09080909)
-#define I2C_SPEED_154   (0x0C0B0C0C)
-#define I2C_SPEED_100   (0x13121313)
-#define I2C_SPEED_77    (0x19181919)
-#define I2C_SPEED_50    (0x27262727)
-
-
-/* ------------------------------------------------------------------------- */
-/* DMA  Controller */
-
-#define DMA_BASE_WRITE        (0x100)
-#define DMA_BASE_READ         (0x140)
-
-#define DMA_CONTROL     (0x00)                  /* 64 */
-#define DMA_ERROR       (0x04)                  /* 65 ( only read instance ) */
-
-#define DMA_DIAG_CONTROL                (0x1C)  /* 71 */
-#define DMA_DIAG_PACKETCOUNTER_LOW      (0x20)  /* 72 */
-#define DMA_DIAG_PACKETCOUNTER_HIGH     (0x24)  /* 73 */
-#define DMA_DIAG_TIMECOUNTER_LOW        (0x28)  /* 74 */
-#define DMA_DIAG_TIMECOUNTER_HIGH       (0x2C)  /* 75 */
-#define DMA_DIAG_RECHECKCOUNTER         (0x30)  /* 76  ( Split completions on read ) */
-#define DMA_DIAG_WAITTIMEOUTINIT        (0x34)  /* 77 */
-#define DMA_DIAG_WAITOVERFLOWCOUNTER    (0x38)  /* 78 */
-#define DMA_DIAG_WAITCOUNTER            (0x3C)  /* 79 */
-
-/* ------------------------------------------------------------------------- */
-/* DMA  Buffer */
-
-#define TS_INPUT_BASE       (0x200)
-#define TS_INPUT_CONTROL(i)         (TS_INPUT_BASE + (i) * 16 + 0x00)
-
-#define TS_OUTPUT_BASE       (0x280)
-#define TS_OUTPUT_CONTROL(i)         (TS_OUTPUT_BASE + (i) * 16 + 0x00)
-
-#define DMA_BUFFER_BASE     (0x300)
-
-#define DMA_BUFFER_CONTROL(i)       (DMA_BUFFER_BASE + (i) * 16 + 0x00)
-#define DMA_BUFFER_ACK(i)           (DMA_BUFFER_BASE + (i) * 16 + 0x04)
-#define DMA_BUFFER_CURRENT(i)       (DMA_BUFFER_BASE + (i) * 16 + 0x08)
-#define DMA_BUFFER_SIZE(i)          (DMA_BUFFER_BASE + (i) * 16 + 0x0c)
-
-#define DMA_BASE_ADDRESS_TABLE  (0x2000)
-#define DMA_BASE_ADDRESS_TABLE_ENTRIES (512)
-
diff --git a/drivers/media/dvb/ddbridge/ddbridge.h b/drivers/media/dvb/ddbridge/ddbridge.h
deleted file mode 100644
index 8b1b41d..0000000
--- a/drivers/media/dvb/ddbridge/ddbridge.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * ddbridge.h: Digital Devices PCIe bridge driver
- *
- * Copyright (C) 2010-2011 Digital Devices GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 only, as published by the Free Software Foundation.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef _DDBRIDGE_H_
-#define _DDBRIDGE_H_
-
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-#include <asm/dma.h>
-#include <linux/dvb/frontend.h>
-#include <linux/dvb/ca.h>
-#include <linux/socket.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_ringbuffer.h"
-#include "dvb_ca_en50221.h"
-#include "dvb_net.h"
-#include "cxd2099.h"
-
-#define DDB_MAX_I2C     4
-#define DDB_MAX_PORT    4
-#define DDB_MAX_INPUT   8
-#define DDB_MAX_OUTPUT  4
-
-struct ddb_info {
-	int   type;
-#define DDB_NONE         0
-#define DDB_OCTOPUS      1
-	char *name;
-	int   port_num;
-	u32   port_type[DDB_MAX_PORT];
-};
-
-/* DMA_SIZE MUST be divisible by 188 and 128 !!! */
-
-#define INPUT_DMA_MAX_BUFS 32      /* hardware table limit */
-#define INPUT_DMA_BUFS 8
-#define INPUT_DMA_SIZE (128*47*21)
-
-#define OUTPUT_DMA_MAX_BUFS 32
-#define OUTPUT_DMA_BUFS 8
-#define OUTPUT_DMA_SIZE (128*47*21)
-
-struct ddb;
-struct ddb_port;
-
-struct ddb_input {
-	struct ddb_port       *port;
-	u32                    nr;
-	int                    attached;
-
-	dma_addr_t             pbuf[INPUT_DMA_MAX_BUFS];
-	u8                    *vbuf[INPUT_DMA_MAX_BUFS];
-	u32                    dma_buf_num;
-	u32                    dma_buf_size;
-
-	struct tasklet_struct  tasklet;
-	spinlock_t             lock;
-	wait_queue_head_t      wq;
-	int                    running;
-	u32                    stat;
-	u32                    cbuf;
-	u32                    coff;
-
-	struct dvb_adapter     adap;
-	struct dvb_device     *dev;
-	struct dvb_frontend   *fe;
-	struct dvb_frontend   *fe2;
-	struct dmxdev          dmxdev;
-	struct dvb_demux       demux;
-	struct dvb_net         dvbnet;
-	struct dmx_frontend    hw_frontend;
-	struct dmx_frontend    mem_frontend;
-	int                    users;
-	int (*gate_ctrl)(struct dvb_frontend *, int);
-};
-
-struct ddb_output {
-	struct ddb_port       *port;
-	u32                    nr;
-	dma_addr_t             pbuf[OUTPUT_DMA_MAX_BUFS];
-	u8                    *vbuf[OUTPUT_DMA_MAX_BUFS];
-	u32                    dma_buf_num;
-	u32                    dma_buf_size;
-	struct tasklet_struct  tasklet;
-	spinlock_t             lock;
-	wait_queue_head_t      wq;
-	int                    running;
-	u32                    stat;
-	u32                    cbuf;
-	u32                    coff;
-
-	struct dvb_adapter     adap;
-	struct dvb_device     *dev;
-};
-
-struct ddb_i2c {
-	struct ddb            *dev;
-	u32                    nr;
-	struct i2c_adapter     adap;
-	struct i2c_adapter     adap2;
-	u32                    regs;
-	u32                    rbuf;
-	u32                    wbuf;
-	int                    done;
-	wait_queue_head_t      wq;
-};
-
-struct ddb_port {
-	struct ddb            *dev;
-	u32                    nr;
-	struct ddb_i2c        *i2c;
-	struct mutex           i2c_gate_lock;
-	u32                    class;
-#define DDB_PORT_NONE           0
-#define DDB_PORT_CI             1
-#define DDB_PORT_TUNER          2
-	u32                    type;
-#define DDB_TUNER_NONE          0
-#define DDB_TUNER_DVBS_ST       1
-#define DDB_TUNER_DVBS_ST_AA    2
-#define DDB_TUNER_DVBCT_TR     16
-#define DDB_TUNER_DVBCT_ST     17
-	u32                    adr;
-
-	struct ddb_input      *input[2];
-	struct ddb_output     *output;
-	struct dvb_ca_en50221 *en;
-};
-
-struct ddb {
-	struct pci_dev        *pdev;
-	unsigned char         *regs;
-	struct ddb_port        port[DDB_MAX_PORT];
-	struct ddb_i2c         i2c[DDB_MAX_I2C];
-	struct ddb_input       input[DDB_MAX_INPUT];
-	struct ddb_output      output[DDB_MAX_OUTPUT];
-
-	struct device         *ddb_dev;
-	int                    nr;
-	u8                     iobuf[1028];
-
-	struct ddb_info       *info;
-	int                    msi;
-};
-
-/****************************************************************************/
-
-#define ddbwritel(_val, _adr)        writel((_val), \
-				     (char *) (dev->regs+(_adr)))
-#define ddbreadl(_adr)               readl((char *) (dev->regs+(_adr)))
-#define ddbcpyto(_adr, _src, _count) memcpy_toio((char *)	\
-				     (dev->regs+(_adr)), (_src), (_count))
-#define ddbcpyfrom(_dst, _adr, _count) memcpy_fromio((_dst), (char *) \
-				       (dev->regs+(_adr)), (_count))
-
-/****************************************************************************/
-
-#endif
diff --git a/drivers/media/dvb/dm1105/Kconfig b/drivers/media/dvb/dm1105/Kconfig
deleted file mode 100644
index f3de0a4..0000000
--- a/drivers/media/dvb/dm1105/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-config DVB_DM1105
-	tristate "SDMC DM1105 based PCI cards"
-	depends on DVB_CORE && PCI && I2C
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_STV0288 if !DVB_FE_CUSTOMISE
-	select DVB_STB6000 if !DVB_FE_CUSTOMISE
-	select DVB_CX24116 if !DVB_FE_CUSTOMISE
-	select DVB_SI21XX if !DVB_FE_CUSTOMISE
-	select DVB_DS3000 if !DVB_FE_CUSTOMISE
-	depends on RC_CORE
-	help
-	  Support for cards based on the SDMC DM1105 PCI chip like
-	  DvbWorld 2002
-
-	  Since these cards have no MPEG decoder onboard, they transmit
-	  only compressed MPEG data over the PCI bus, so you need
-	  an external software decoder to watch TV on your computer.
-
-	  Say Y or M if you own such a device and want to use it.
diff --git a/drivers/media/dvb/dm1105/Makefile b/drivers/media/dvb/dm1105/Makefile
deleted file mode 100644
index 95a008b..0000000
--- a/drivers/media/dvb/dm1105/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-$(CONFIG_DVB_DM1105) += dm1105.o
-
-ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends
diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c
deleted file mode 100644
index a609b3a..0000000
--- a/drivers/media/dvb/dm1105/dm1105.c
+++ /dev/null
@@ -1,1248 +0,0 @@
-/*
- * dm1105.c - driver for DVB cards based on SDMC DM1105 PCI chip
- *
- * Copyright (C) 2008 Igor M. Liplianin <liplianin@me.by>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/proc_fs.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/slab.h>
-#include <media/rc-core.h>
-
-#include "demux.h"
-#include "dmxdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-#include "dvbdev.h"
-#include "dvb-pll.h"
-
-#include "stv0299.h"
-#include "stv0288.h"
-#include "stb6000.h"
-#include "si21xx.h"
-#include "cx24116.h"
-#include "z0194a.h"
-#include "ds3000.h"
-
-#define MODULE_NAME "dm1105"
-
-#define UNSET (-1U)
-
-#define DM1105_BOARD_NOAUTO			UNSET
-#define DM1105_BOARD_UNKNOWN			0
-#define DM1105_BOARD_DVBWORLD_2002		1
-#define DM1105_BOARD_DVBWORLD_2004		2
-#define DM1105_BOARD_AXESS_DM05			3
-#define DM1105_BOARD_UNBRANDED_I2C_ON_GPIO	4
-
-/* ----------------------------------------------- */
-/*
- * PCI ID's
- */
-#ifndef PCI_VENDOR_ID_TRIGEM
-#define PCI_VENDOR_ID_TRIGEM	0x109f
-#endif
-#ifndef PCI_VENDOR_ID_AXESS
-#define PCI_VENDOR_ID_AXESS	0x195d
-#endif
-#ifndef PCI_DEVICE_ID_DM1105
-#define PCI_DEVICE_ID_DM1105	0x036f
-#endif
-#ifndef PCI_DEVICE_ID_DW2002
-#define PCI_DEVICE_ID_DW2002	0x2002
-#endif
-#ifndef PCI_DEVICE_ID_DW2004
-#define PCI_DEVICE_ID_DW2004	0x2004
-#endif
-#ifndef PCI_DEVICE_ID_DM05
-#define PCI_DEVICE_ID_DM05	0x1105
-#endif
-/* ----------------------------------------------- */
-/* sdmc dm1105 registers */
-
-/* TS Control */
-#define DM1105_TSCTR				0x00
-#define DM1105_DTALENTH				0x04
-
-/* GPIO Interface */
-#define DM1105_GPIOVAL				0x08
-#define DM1105_GPIOCTR				0x0c
-
-/* PID serial number */
-#define DM1105_PIDN				0x10
-
-/* Odd-even secret key select */
-#define DM1105_CWSEL				0x14
-
-/* Host Command Interface */
-#define DM1105_HOST_CTR				0x18
-#define DM1105_HOST_AD				0x1c
-
-/* PCI Interface */
-#define DM1105_CR				0x30
-#define DM1105_RST				0x34
-#define DM1105_STADR				0x38
-#define DM1105_RLEN				0x3c
-#define DM1105_WRP				0x40
-#define DM1105_INTCNT				0x44
-#define DM1105_INTMAK				0x48
-#define DM1105_INTSTS				0x4c
-
-/* CW Value */
-#define DM1105_ODD				0x50
-#define DM1105_EVEN				0x58
-
-/* PID Value */
-#define DM1105_PID				0x60
-
-/* IR Control */
-#define DM1105_IRCTR				0x64
-#define DM1105_IRMODE				0x68
-#define DM1105_SYSTEMCODE			0x6c
-#define DM1105_IRCODE				0x70
-
-/* Unknown Values */
-#define DM1105_ENCRYPT				0x74
-#define DM1105_VER				0x7c
-
-/* I2C Interface */
-#define DM1105_I2CCTR				0x80
-#define DM1105_I2CSTS				0x81
-#define DM1105_I2CDAT				0x82
-#define DM1105_I2C_RA				0x83
-/* ----------------------------------------------- */
-/* Interrupt Mask Bits */
-
-#define INTMAK_TSIRQM				0x01
-#define INTMAK_HIRQM				0x04
-#define INTMAK_IRM				0x08
-#define INTMAK_ALLMASK				(INTMAK_TSIRQM | \
-						INTMAK_HIRQM | \
-						INTMAK_IRM)
-#define INTMAK_NONEMASK				0x00
-
-/* Interrupt Status Bits */
-#define INTSTS_TSIRQ				0x01
-#define INTSTS_HIRQ				0x04
-#define INTSTS_IR				0x08
-
-/* IR Control Bits */
-#define DM1105_IR_EN				0x01
-#define DM1105_SYS_CHK				0x02
-#define DM1105_REP_FLG				0x08
-
-/* EEPROM addr */
-#define IIC_24C01_addr				0xa0
-/* Max board count */
-#define DM1105_MAX				0x04
-
-#define DRIVER_NAME				"dm1105"
-#define DM1105_I2C_GPIO_NAME			"dm1105-gpio"
-
-#define DM1105_DMA_PACKETS			47
-#define DM1105_DMA_PACKET_LENGTH		(128*4)
-#define DM1105_DMA_BYTES			(128 * 4 * DM1105_DMA_PACKETS)
-
-/*  */
-#define GPIO08					(1 << 8)
-#define GPIO13					(1 << 13)
-#define GPIO14					(1 << 14)
-#define GPIO15					(1 << 15)
-#define GPIO16					(1 << 16)
-#define GPIO17					(1 << 17)
-#define GPIO_ALL				0x03ffff
-
-/* GPIO's for LNB power control */
-#define DM1105_LNB_MASK				(GPIO_ALL & ~(GPIO14 | GPIO13))
-#define DM1105_LNB_OFF				GPIO17
-#define DM1105_LNB_13V				(GPIO16 | GPIO08)
-#define DM1105_LNB_18V				GPIO08
-
-/* GPIO's for LNB power control for Axess DM05 */
-#define DM05_LNB_MASK				(GPIO_ALL & ~(GPIO14 | GPIO13))
-#define DM05_LNB_OFF				GPIO17/* actually 13v */
-#define DM05_LNB_13V				GPIO17
-#define DM05_LNB_18V				(GPIO17 | GPIO16)
-
-/* GPIO's for LNB power control for unbranded with I2C on GPIO */
-#define UNBR_LNB_MASK				(GPIO17 | GPIO16)
-#define UNBR_LNB_OFF				0
-#define UNBR_LNB_13V				GPIO17
-#define UNBR_LNB_18V				(GPIO17 | GPIO16)
-
-static unsigned int card[]  = {[0 ... 3] = UNSET };
-module_param_array(card,  int, NULL, 0444);
-MODULE_PARM_DESC(card, "card type");
-
-static int ir_debug;
-module_param(ir_debug, int, 0644);
-MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding");
-
-static unsigned int dm1105_devcount;
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-struct dm1105_board {
-	char	*name;
-	struct	{
-		u32	mask, off, v13, v18;
-	} lnb;
-	u32	gpio_scl, gpio_sda;
-};
-
-struct dm1105_subid {
-	u16     subvendor;
-	u16     subdevice;
-	u32     card;
-};
-
-static const struct dm1105_board dm1105_boards[] = {
-	[DM1105_BOARD_UNKNOWN] = {
-		.name		= "UNKNOWN/GENERIC",
-		.lnb = {
-			.mask = DM1105_LNB_MASK,
-			.off = DM1105_LNB_OFF,
-			.v13 = DM1105_LNB_13V,
-			.v18 = DM1105_LNB_18V,
-		},
-	},
-	[DM1105_BOARD_DVBWORLD_2002] = {
-		.name		= "DVBWorld PCI 2002",
-		.lnb = {
-			.mask = DM1105_LNB_MASK,
-			.off = DM1105_LNB_OFF,
-			.v13 = DM1105_LNB_13V,
-			.v18 = DM1105_LNB_18V,
-		},
-	},
-	[DM1105_BOARD_DVBWORLD_2004] = {
-		.name		= "DVBWorld PCI 2004",
-		.lnb = {
-			.mask = DM1105_LNB_MASK,
-			.off = DM1105_LNB_OFF,
-			.v13 = DM1105_LNB_13V,
-			.v18 = DM1105_LNB_18V,
-		},
-	},
-	[DM1105_BOARD_AXESS_DM05] = {
-		.name		= "Axess/EasyTv DM05",
-		.lnb = {
-			.mask = DM05_LNB_MASK,
-			.off = DM05_LNB_OFF,
-			.v13 = DM05_LNB_13V,
-			.v18 = DM05_LNB_18V,
-		},
-	},
-	[DM1105_BOARD_UNBRANDED_I2C_ON_GPIO] = {
-		.name		= "Unbranded DM1105 with i2c on GPIOs",
-		.lnb = {
-			.mask = UNBR_LNB_MASK,
-			.off = UNBR_LNB_OFF,
-			.v13 = UNBR_LNB_13V,
-			.v18 = UNBR_LNB_18V,
-		},
-		.gpio_scl	= GPIO14,
-		.gpio_sda	= GPIO13,
-	},
-};
-
-static const struct dm1105_subid dm1105_subids[] = {
-	{
-		.subvendor = 0x0000,
-		.subdevice = 0x2002,
-		.card      = DM1105_BOARD_DVBWORLD_2002,
-	}, {
-		.subvendor = 0x0001,
-		.subdevice = 0x2002,
-		.card      = DM1105_BOARD_DVBWORLD_2002,
-	}, {
-		.subvendor = 0x0000,
-		.subdevice = 0x2004,
-		.card      = DM1105_BOARD_DVBWORLD_2004,
-	}, {
-		.subvendor = 0x0001,
-		.subdevice = 0x2004,
-		.card      = DM1105_BOARD_DVBWORLD_2004,
-	}, {
-		.subvendor = 0x195d,
-		.subdevice = 0x1105,
-		.card      = DM1105_BOARD_AXESS_DM05,
-	},
-};
-
-static void dm1105_card_list(struct pci_dev *pci)
-{
-	int i;
-
-	if (0 == pci->subsystem_vendor &&
-			0 == pci->subsystem_device) {
-		printk(KERN_ERR
-			"dm1105: Your board has no valid PCI Subsystem ID\n"
-			"dm1105: and thus can't be autodetected\n"
-			"dm1105: Please pass card=<n> insmod option to\n"
-			"dm1105: workaround that.  Redirect complaints to\n"
-			"dm1105: the vendor of the TV card.  Best regards,\n"
-			"dm1105: -- tux\n");
-	} else {
-		printk(KERN_ERR
-			"dm1105: Your board isn't known (yet) to the driver.\n"
-			"dm1105: You can try to pick one of the existing\n"
-			"dm1105: card configs via card=<n> insmod option.\n"
-			"dm1105: Updating to the latest version might help\n"
-			"dm1105: as well.\n");
-	}
-	printk(KERN_ERR "Here is a list of valid choices for the card=<n> "
-		   "insmod option:\n");
-	for (i = 0; i < ARRAY_SIZE(dm1105_boards); i++)
-		printk(KERN_ERR "dm1105:    card=%d -> %s\n",
-				i, dm1105_boards[i].name);
-}
-
-/* infrared remote control */
-struct infrared {
-	struct rc_dev		*dev;
-	char			input_phys[32];
-	struct work_struct	work;
-	u32			ir_command;
-};
-
-struct dm1105_dev {
-	/* pci */
-	struct pci_dev *pdev;
-	u8 __iomem *io_mem;
-
-	/* ir */
-	struct infrared ir;
-
-	/* dvb */
-	struct dmx_frontend hw_frontend;
-	struct dmx_frontend mem_frontend;
-	struct dmxdev dmxdev;
-	struct dvb_adapter dvb_adapter;
-	struct dvb_demux demux;
-	struct dvb_frontend *fe;
-	struct dvb_net dvbnet;
-	unsigned int full_ts_users;
-	unsigned int boardnr;
-	int nr;
-
-	/* i2c */
-	struct i2c_adapter i2c_adap;
-	struct i2c_adapter i2c_bb_adap;
-	struct i2c_algo_bit_data i2c_bit;
-
-	/* irq */
-	struct work_struct work;
-	struct workqueue_struct *wq;
-	char wqn[16];
-
-	/* dma */
-	dma_addr_t dma_addr;
-	unsigned char *ts_buf;
-	u32 wrp;
-	u32 nextwrp;
-	u32 buffer_size;
-	unsigned int	PacketErrorCount;
-	unsigned int dmarst;
-	spinlock_t lock;
-};
-
-#define dm_io_mem(reg)	((unsigned long)(&dev->io_mem[reg]))
-
-#define dm_readb(reg)		inb(dm_io_mem(reg))
-#define dm_writeb(reg, value)	outb((value), (dm_io_mem(reg)))
-
-#define dm_readw(reg)		inw(dm_io_mem(reg))
-#define dm_writew(reg, value)	outw((value), (dm_io_mem(reg)))
-
-#define dm_readl(reg)		inl(dm_io_mem(reg))
-#define dm_writel(reg, value)	outl((value), (dm_io_mem(reg)))
-
-#define dm_andorl(reg, mask, value) \
-	outl((inl(dm_io_mem(reg)) & ~(mask)) |\
-		((value) & (mask)), (dm_io_mem(reg)))
-
-#define dm_setl(reg, bit)	dm_andorl((reg), (bit), (bit))
-#define dm_clearl(reg, bit)	dm_andorl((reg), (bit), 0)
-
-/* The chip has 18 GPIOs. In HOST mode GPIO's used as 15 bit address lines,
- so we can use only 3 GPIO's from GPIO15 to GPIO17.
- Here I don't check whether HOST is enebled as it is not implemented yet.
- */
-static void dm1105_gpio_set(struct dm1105_dev *dev, u32 mask)
-{
-	if (mask & 0xfffc0000)
-		printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
-
-	if (mask & 0x0003ffff)
-		dm_setl(DM1105_GPIOVAL, mask & 0x0003ffff);
-
-}
-
-static void dm1105_gpio_clear(struct dm1105_dev *dev, u32 mask)
-{
-	if (mask & 0xfffc0000)
-		printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
-
-	if (mask & 0x0003ffff)
-		dm_clearl(DM1105_GPIOVAL, mask & 0x0003ffff);
-
-}
-
-static void dm1105_gpio_andor(struct dm1105_dev *dev, u32 mask, u32 val)
-{
-	if (mask & 0xfffc0000)
-		printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
-
-	if (mask & 0x0003ffff)
-		dm_andorl(DM1105_GPIOVAL, mask & 0x0003ffff, val);
-
-}
-
-static u32 dm1105_gpio_get(struct dm1105_dev *dev, u32 mask)
-{
-	if (mask & 0xfffc0000)
-		printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
-
-	if (mask & 0x0003ffff)
-		return dm_readl(DM1105_GPIOVAL) & mask & 0x0003ffff;
-
-	return 0;
-}
-
-static void dm1105_gpio_enable(struct dm1105_dev *dev, u32 mask, int asoutput)
-{
-	if (mask & 0xfffc0000)
-		printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
-
-	if ((mask & 0x0003ffff) && asoutput)
-		dm_clearl(DM1105_GPIOCTR, mask & 0x0003ffff);
-	else if ((mask & 0x0003ffff) && !asoutput)
-		dm_setl(DM1105_GPIOCTR, mask & 0x0003ffff);
-
-}
-
-static void dm1105_setline(struct dm1105_dev *dev, u32 line, int state)
-{
-	if (state)
-		dm1105_gpio_enable(dev, line, 0);
-	else {
-		dm1105_gpio_enable(dev, line, 1);
-		dm1105_gpio_clear(dev, line);
-	}
-}
-
-static void dm1105_setsda(void *data, int state)
-{
-	struct dm1105_dev *dev = data;
-
-	dm1105_setline(dev, dm1105_boards[dev->boardnr].gpio_sda, state);
-}
-
-static void dm1105_setscl(void *data, int state)
-{
-	struct dm1105_dev *dev = data;
-
-	dm1105_setline(dev, dm1105_boards[dev->boardnr].gpio_scl, state);
-}
-
-static int dm1105_getsda(void *data)
-{
-	struct dm1105_dev *dev = data;
-
-	return dm1105_gpio_get(dev, dm1105_boards[dev->boardnr].gpio_sda)
-									? 1 : 0;
-}
-
-static int dm1105_getscl(void *data)
-{
-	struct dm1105_dev *dev = data;
-
-	return dm1105_gpio_get(dev, dm1105_boards[dev->boardnr].gpio_scl)
-									? 1 : 0;
-}
-
-static int dm1105_i2c_xfer(struct i2c_adapter *i2c_adap,
-			    struct i2c_msg *msgs, int num)
-{
-	struct dm1105_dev *dev ;
-
-	int addr, rc, i, j, k, len, byte, data;
-	u8 status;
-
-	dev = i2c_adap->algo_data;
-	for (i = 0; i < num; i++) {
-		dm_writeb(DM1105_I2CCTR, 0x00);
-		if (msgs[i].flags & I2C_M_RD) {
-			/* read bytes */
-			addr  = msgs[i].addr << 1;
-			addr |= 1;
-			dm_writeb(DM1105_I2CDAT, addr);
-			for (byte = 0; byte < msgs[i].len; byte++)
-				dm_writeb(DM1105_I2CDAT + byte + 1, 0);
-
-			dm_writeb(DM1105_I2CCTR, 0x81 + msgs[i].len);
-			for (j = 0; j < 55; j++) {
-				mdelay(10);
-				status = dm_readb(DM1105_I2CSTS);
-				if ((status & 0xc0) == 0x40)
-					break;
-			}
-			if (j >= 55)
-				return -1;
-
-			for (byte = 0; byte < msgs[i].len; byte++) {
-				rc = dm_readb(DM1105_I2CDAT + byte + 1);
-				if (rc < 0)
-					goto err;
-				msgs[i].buf[byte] = rc;
-			}
-		} else if ((msgs[i].buf[0] == 0xf7) && (msgs[i].addr == 0x55)) {
-			/* prepaired for cx24116 firmware */
-			/* Write in small blocks */
-			len = msgs[i].len - 1;
-			k = 1;
-			do {
-				dm_writeb(DM1105_I2CDAT, msgs[i].addr << 1);
-				dm_writeb(DM1105_I2CDAT + 1, 0xf7);
-				for (byte = 0; byte < (len > 48 ? 48 : len); byte++) {
-					data = msgs[i].buf[k + byte];
-					dm_writeb(DM1105_I2CDAT + byte + 2, data);
-				}
-				dm_writeb(DM1105_I2CCTR, 0x82 + (len > 48 ? 48 : len));
-				for (j = 0; j < 25; j++) {
-					mdelay(10);
-					status = dm_readb(DM1105_I2CSTS);
-					if ((status & 0xc0) == 0x40)
-						break;
-				}
-
-				if (j >= 25)
-					return -1;
-
-				k += 48;
-				len -= 48;
-			} while (len > 0);
-		} else {
-			/* write bytes */
-			dm_writeb(DM1105_I2CDAT, msgs[i].addr << 1);
-			for (byte = 0; byte < msgs[i].len; byte++) {
-				data = msgs[i].buf[byte];
-				dm_writeb(DM1105_I2CDAT + byte + 1, data);
-			}
-			dm_writeb(DM1105_I2CCTR, 0x81 + msgs[i].len);
-			for (j = 0; j < 25; j++) {
-				mdelay(10);
-				status = dm_readb(DM1105_I2CSTS);
-				if ((status & 0xc0) == 0x40)
-					break;
-			}
-
-			if (j >= 25)
-				return -1;
-		}
-	}
-	return num;
- err:
-	return rc;
-}
-
-static u32 functionality(struct i2c_adapter *adap)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm dm1105_algo = {
-	.master_xfer   = dm1105_i2c_xfer,
-	.functionality = functionality,
-};
-
-static inline struct dm1105_dev *feed_to_dm1105_dev(struct dvb_demux_feed *feed)
-{
-	return container_of(feed->demux, struct dm1105_dev, demux);
-}
-
-static inline struct dm1105_dev *frontend_to_dm1105_dev(struct dvb_frontend *fe)
-{
-	return container_of(fe->dvb, struct dm1105_dev, dvb_adapter);
-}
-
-static int dm1105_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-{
-	struct dm1105_dev *dev = frontend_to_dm1105_dev(fe);
-
-	dm1105_gpio_enable(dev, dm1105_boards[dev->boardnr].lnb.mask, 1);
-	if (voltage == SEC_VOLTAGE_18)
-		dm1105_gpio_andor(dev,
-				dm1105_boards[dev->boardnr].lnb.mask,
-				dm1105_boards[dev->boardnr].lnb.v18);
-	else if (voltage == SEC_VOLTAGE_13)
-		dm1105_gpio_andor(dev,
-				dm1105_boards[dev->boardnr].lnb.mask,
-				dm1105_boards[dev->boardnr].lnb.v13);
-	else
-		dm1105_gpio_andor(dev,
-				dm1105_boards[dev->boardnr].lnb.mask,
-				dm1105_boards[dev->boardnr].lnb.off);
-
-	return 0;
-}
-
-static void dm1105_set_dma_addr(struct dm1105_dev *dev)
-{
-	dm_writel(DM1105_STADR, cpu_to_le32(dev->dma_addr));
-}
-
-static int __devinit dm1105_dma_map(struct dm1105_dev *dev)
-{
-	dev->ts_buf = pci_alloc_consistent(dev->pdev,
-					6 * DM1105_DMA_BYTES,
-					&dev->dma_addr);
-
-	return !dev->ts_buf;
-}
-
-static void dm1105_dma_unmap(struct dm1105_dev *dev)
-{
-	pci_free_consistent(dev->pdev,
-			6 * DM1105_DMA_BYTES,
-			dev->ts_buf,
-			dev->dma_addr);
-}
-
-static void dm1105_enable_irqs(struct dm1105_dev *dev)
-{
-	dm_writeb(DM1105_INTMAK, INTMAK_ALLMASK);
-	dm_writeb(DM1105_CR, 1);
-}
-
-static void dm1105_disable_irqs(struct dm1105_dev *dev)
-{
-	dm_writeb(DM1105_INTMAK, INTMAK_IRM);
-	dm_writeb(DM1105_CR, 0);
-}
-
-static int dm1105_start_feed(struct dvb_demux_feed *f)
-{
-	struct dm1105_dev *dev = feed_to_dm1105_dev(f);
-
-	if (dev->full_ts_users++ == 0)
-		dm1105_enable_irqs(dev);
-
-	return 0;
-}
-
-static int dm1105_stop_feed(struct dvb_demux_feed *f)
-{
-	struct dm1105_dev *dev = feed_to_dm1105_dev(f);
-
-	if (--dev->full_ts_users == 0)
-		dm1105_disable_irqs(dev);
-
-	return 0;
-}
-
-/* ir work handler */
-static void dm1105_emit_key(struct work_struct *work)
-{
-	struct infrared *ir = container_of(work, struct infrared, work);
-	u32 ircom = ir->ir_command;
-	u8 data;
-
-	if (ir_debug)
-		printk(KERN_INFO "%s: received byte 0x%04x\n", __func__, ircom);
-
-	data = (ircom >> 8) & 0x7f;
-
-	rc_keydown(ir->dev, data, 0);
-}
-
-/* work handler */
-static void dm1105_dmx_buffer(struct work_struct *work)
-{
-	struct dm1105_dev *dev = container_of(work, struct dm1105_dev, work);
-	unsigned int nbpackets;
-	u32 oldwrp = dev->wrp;
-	u32 nextwrp = dev->nextwrp;
-
-	if (!((dev->ts_buf[oldwrp] == 0x47) &&
-			(dev->ts_buf[oldwrp + 188] == 0x47) &&
-			(dev->ts_buf[oldwrp + 188 * 2] == 0x47))) {
-		dev->PacketErrorCount++;
-		/* bad packet found */
-		if ((dev->PacketErrorCount >= 2) &&
-				(dev->dmarst == 0)) {
-			dm_writeb(DM1105_RST, 1);
-			dev->wrp = 0;
-			dev->PacketErrorCount = 0;
-			dev->dmarst = 0;
-			return;
-		}
-	}
-
-	if (nextwrp < oldwrp) {
-		memcpy(dev->ts_buf + dev->buffer_size, dev->ts_buf, nextwrp);
-		nbpackets = ((dev->buffer_size - oldwrp) + nextwrp) / 188;
-	} else
-		nbpackets = (nextwrp - oldwrp) / 188;
-
-	dev->wrp = nextwrp;
-	dvb_dmx_swfilter_packets(&dev->demux, &dev->ts_buf[oldwrp], nbpackets);
-}
-
-static irqreturn_t dm1105_irq(int irq, void *dev_id)
-{
-	struct dm1105_dev *dev = dev_id;
-
-	/* Read-Write INSTS Ack's Interrupt for DM1105 chip 16.03.2008 */
-	unsigned int intsts = dm_readb(DM1105_INTSTS);
-	dm_writeb(DM1105_INTSTS, intsts);
-
-	switch (intsts) {
-	case INTSTS_TSIRQ:
-	case (INTSTS_TSIRQ | INTSTS_IR):
-		dev->nextwrp = dm_readl(DM1105_WRP) - dm_readl(DM1105_STADR);
-		queue_work(dev->wq, &dev->work);
-		break;
-	case INTSTS_IR:
-		dev->ir.ir_command = dm_readl(DM1105_IRCODE);
-		schedule_work(&dev->ir.work);
-		break;
-	}
-
-	return IRQ_HANDLED;
-}
-
-int __devinit dm1105_ir_init(struct dm1105_dev *dm1105)
-{
-	struct rc_dev *dev;
-	int err = -ENOMEM;
-
-	dev = rc_allocate_device();
-	if (!dev)
-		return -ENOMEM;
-
-	snprintf(dm1105->ir.input_phys, sizeof(dm1105->ir.input_phys),
-		"pci-%s/ir0", pci_name(dm1105->pdev));
-
-	dev->driver_name = MODULE_NAME;
-	dev->map_name = RC_MAP_DM1105_NEC;
-	dev->driver_type = RC_DRIVER_SCANCODE;
-	dev->input_name = "DVB on-card IR receiver";
-	dev->input_phys = dm1105->ir.input_phys;
-	dev->input_id.bustype = BUS_PCI;
-	dev->input_id.version = 1;
-	if (dm1105->pdev->subsystem_vendor) {
-		dev->input_id.vendor = dm1105->pdev->subsystem_vendor;
-		dev->input_id.product = dm1105->pdev->subsystem_device;
-	} else {
-		dev->input_id.vendor = dm1105->pdev->vendor;
-		dev->input_id.product = dm1105->pdev->device;
-	}
-	dev->dev.parent = &dm1105->pdev->dev;
-
-	INIT_WORK(&dm1105->ir.work, dm1105_emit_key);
-
-	err = rc_register_device(dev);
-	if (err < 0) {
-		rc_free_device(dev);
-		return err;
-	}
-
-	dm1105->ir.dev = dev;
-	return 0;
-}
-
-void __devexit dm1105_ir_exit(struct dm1105_dev *dm1105)
-{
-	rc_unregister_device(dm1105->ir.dev);
-}
-
-static int __devinit dm1105_hw_init(struct dm1105_dev *dev)
-{
-	dm1105_disable_irqs(dev);
-
-	dm_writeb(DM1105_HOST_CTR, 0);
-
-	/*DATALEN 188,*/
-	dm_writeb(DM1105_DTALENTH, 188);
-	/*TS_STRT TS_VALP MSBFIRST TS_MODE ALPAS TSPES*/
-	dm_writew(DM1105_TSCTR, 0xc10a);
-
-	/* map DMA and set address */
-	dm1105_dma_map(dev);
-	dm1105_set_dma_addr(dev);
-	/* big buffer */
-	dm_writel(DM1105_RLEN, 5 * DM1105_DMA_BYTES);
-	dm_writeb(DM1105_INTCNT, 47);
-
-	/* IR NEC mode enable */
-	dm_writeb(DM1105_IRCTR, (DM1105_IR_EN | DM1105_SYS_CHK));
-	dm_writeb(DM1105_IRMODE, 0);
-	dm_writew(DM1105_SYSTEMCODE, 0);
-
-	return 0;
-}
-
-static void dm1105_hw_exit(struct dm1105_dev *dev)
-{
-	dm1105_disable_irqs(dev);
-
-	/* IR disable */
-	dm_writeb(DM1105_IRCTR, 0);
-	dm_writeb(DM1105_INTMAK, INTMAK_NONEMASK);
-
-	dm1105_dma_unmap(dev);
-}
-
-static struct stv0299_config sharp_z0194a_config = {
-	.demod_address = 0x68,
-	.inittab = sharp_z0194a_inittab,
-	.mclk = 88000000UL,
-	.invert = 1,
-	.skip_reinit = 0,
-	.lock_output = STV0299_LOCKOUTPUT_1,
-	.volt13_op0_op1 = STV0299_VOLT13_OP1,
-	.min_delay_ms = 100,
-	.set_symbol_rate = sharp_z0194a_set_symbol_rate,
-};
-
-static struct stv0288_config earda_config = {
-	.demod_address = 0x68,
-	.min_delay_ms = 100,
-};
-
-static struct si21xx_config serit_config = {
-	.demod_address = 0x68,
-	.min_delay_ms = 100,
-
-};
-
-static struct cx24116_config serit_sp2633_config = {
-	.demod_address = 0x55,
-};
-
-static struct ds3000_config dvbworld_ds3000_config = {
-	.demod_address = 0x68,
-};
-
-static int __devinit frontend_init(struct dm1105_dev *dev)
-{
-	int ret;
-
-	switch (dev->boardnr) {
-	case DM1105_BOARD_UNBRANDED_I2C_ON_GPIO:
-		dm1105_gpio_enable(dev, GPIO15, 1);
-		dm1105_gpio_clear(dev, GPIO15);
-		msleep(100);
-		dm1105_gpio_set(dev, GPIO15);
-		msleep(200);
-		dev->fe = dvb_attach(
-			stv0299_attach, &sharp_z0194a_config,
-			&dev->i2c_bb_adap);
-		if (dev->fe) {
-			dev->fe->ops.set_voltage = dm1105_set_voltage;
-			dvb_attach(dvb_pll_attach, dev->fe, 0x60,
-					&dev->i2c_bb_adap, DVB_PLL_OPERA1);
-			break;
-		}
-
-		dev->fe = dvb_attach(
-			stv0288_attach, &earda_config,
-			&dev->i2c_bb_adap);
-		if (dev->fe) {
-			dev->fe->ops.set_voltage = dm1105_set_voltage;
-			dvb_attach(stb6000_attach, dev->fe, 0x61,
-					&dev->i2c_bb_adap);
-			break;
-		}
-
-		dev->fe = dvb_attach(
-			si21xx_attach, &serit_config,
-			&dev->i2c_bb_adap);
-		if (dev->fe)
-			dev->fe->ops.set_voltage = dm1105_set_voltage;
-		break;
-	case DM1105_BOARD_DVBWORLD_2004:
-		dev->fe = dvb_attach(
-			cx24116_attach, &serit_sp2633_config,
-			&dev->i2c_adap);
-		if (dev->fe) {
-			dev->fe->ops.set_voltage = dm1105_set_voltage;
-			break;
-		}
-
-		dev->fe = dvb_attach(
-			ds3000_attach, &dvbworld_ds3000_config,
-			&dev->i2c_adap);
-		if (dev->fe)
-			dev->fe->ops.set_voltage = dm1105_set_voltage;
-
-		break;
-	case DM1105_BOARD_DVBWORLD_2002:
-	case DM1105_BOARD_AXESS_DM05:
-	default:
-		dev->fe = dvb_attach(
-			stv0299_attach, &sharp_z0194a_config,
-			&dev->i2c_adap);
-		if (dev->fe) {
-			dev->fe->ops.set_voltage = dm1105_set_voltage;
-			dvb_attach(dvb_pll_attach, dev->fe, 0x60,
-					&dev->i2c_adap, DVB_PLL_OPERA1);
-			break;
-		}
-
-		dev->fe = dvb_attach(
-			stv0288_attach, &earda_config,
-			&dev->i2c_adap);
-		if (dev->fe) {
-			dev->fe->ops.set_voltage = dm1105_set_voltage;
-			dvb_attach(stb6000_attach, dev->fe, 0x61,
-					&dev->i2c_adap);
-			break;
-		}
-
-		dev->fe = dvb_attach(
-			si21xx_attach, &serit_config,
-			&dev->i2c_adap);
-		if (dev->fe)
-			dev->fe->ops.set_voltage = dm1105_set_voltage;
-
-	}
-
-	if (!dev->fe) {
-		dev_err(&dev->pdev->dev, "could not attach frontend\n");
-		return -ENODEV;
-	}
-
-	ret = dvb_register_frontend(&dev->dvb_adapter, dev->fe);
-	if (ret < 0) {
-		if (dev->fe->ops.release)
-			dev->fe->ops.release(dev->fe);
-		dev->fe = NULL;
-		return ret;
-	}
-
-	return 0;
-}
-
-static void __devinit dm1105_read_mac(struct dm1105_dev *dev, u8 *mac)
-{
-	static u8 command[1] = { 0x28 };
-
-	struct i2c_msg msg[] = {
-		{
-			.addr = IIC_24C01_addr >> 1,
-			.flags = 0,
-			.buf = command,
-			.len = 1
-		}, {
-			.addr = IIC_24C01_addr >> 1,
-			.flags = I2C_M_RD,
-			.buf = mac,
-			.len = 6
-		},
-	};
-
-	dm1105_i2c_xfer(&dev->i2c_adap, msg , 2);
-	dev_info(&dev->pdev->dev, "MAC %pM\n", mac);
-}
-
-static int __devinit dm1105_probe(struct pci_dev *pdev,
-				  const struct pci_device_id *ent)
-{
-	struct dm1105_dev *dev;
-	struct dvb_adapter *dvb_adapter;
-	struct dvb_demux *dvbdemux;
-	struct dmx_demux *dmx;
-	int ret = -ENOMEM;
-	int i;
-
-	dev = kzalloc(sizeof(struct dm1105_dev), GFP_KERNEL);
-	if (!dev)
-		return -ENOMEM;
-
-	/* board config */
-	dev->nr = dm1105_devcount;
-	dev->boardnr = UNSET;
-	if (card[dev->nr] < ARRAY_SIZE(dm1105_boards))
-		dev->boardnr = card[dev->nr];
-	for (i = 0; UNSET == dev->boardnr &&
-				i < ARRAY_SIZE(dm1105_subids); i++)
-		if (pdev->subsystem_vendor ==
-			dm1105_subids[i].subvendor &&
-				pdev->subsystem_device ==
-					dm1105_subids[i].subdevice)
-			dev->boardnr = dm1105_subids[i].card;
-
-	if (UNSET == dev->boardnr) {
-		dev->boardnr = DM1105_BOARD_UNKNOWN;
-		dm1105_card_list(pdev);
-	}
-
-	dm1105_devcount++;
-	dev->pdev = pdev;
-	dev->buffer_size = 5 * DM1105_DMA_BYTES;
-	dev->PacketErrorCount = 0;
-	dev->dmarst = 0;
-
-	ret = pci_enable_device(pdev);
-	if (ret < 0)
-		goto err_kfree;
-
-	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-	if (ret < 0)
-		goto err_pci_disable_device;
-
-	pci_set_master(pdev);
-
-	ret = pci_request_regions(pdev, DRIVER_NAME);
-	if (ret < 0)
-		goto err_pci_disable_device;
-
-	dev->io_mem = pci_iomap(pdev, 0, pci_resource_len(pdev, 0));
-	if (!dev->io_mem) {
-		ret = -EIO;
-		goto err_pci_release_regions;
-	}
-
-	spin_lock_init(&dev->lock);
-	pci_set_drvdata(pdev, dev);
-
-	ret = dm1105_hw_init(dev);
-	if (ret < 0)
-		goto err_pci_iounmap;
-
-	/* i2c */
-	i2c_set_adapdata(&dev->i2c_adap, dev);
-	strcpy(dev->i2c_adap.name, DRIVER_NAME);
-	dev->i2c_adap.owner = THIS_MODULE;
-	dev->i2c_adap.dev.parent = &pdev->dev;
-	dev->i2c_adap.algo = &dm1105_algo;
-	dev->i2c_adap.algo_data = dev;
-	ret = i2c_add_adapter(&dev->i2c_adap);
-
-	if (ret < 0)
-		goto err_dm1105_hw_exit;
-
-	i2c_set_adapdata(&dev->i2c_bb_adap, dev);
-	strcpy(dev->i2c_bb_adap.name, DM1105_I2C_GPIO_NAME);
-	dev->i2c_bb_adap.owner = THIS_MODULE;
-	dev->i2c_bb_adap.dev.parent = &pdev->dev;
-	dev->i2c_bb_adap.algo_data = &dev->i2c_bit;
-	dev->i2c_bit.data = dev;
-	dev->i2c_bit.setsda = dm1105_setsda;
-	dev->i2c_bit.setscl = dm1105_setscl;
-	dev->i2c_bit.getsda = dm1105_getsda;
-	dev->i2c_bit.getscl = dm1105_getscl;
-	dev->i2c_bit.udelay = 10;
-	dev->i2c_bit.timeout = 10;
-
-	/* Raise SCL and SDA */
-	dm1105_setsda(dev, 1);
-	dm1105_setscl(dev, 1);
-
-	ret = i2c_bit_add_bus(&dev->i2c_bb_adap);
-	if (ret < 0)
-		goto err_i2c_del_adapter;
-
-	/* dvb */
-	ret = dvb_register_adapter(&dev->dvb_adapter, DRIVER_NAME,
-					THIS_MODULE, &pdev->dev, adapter_nr);
-	if (ret < 0)
-		goto err_i2c_del_adapters;
-
-	dvb_adapter = &dev->dvb_adapter;
-
-	dm1105_read_mac(dev, dvb_adapter->proposed_mac);
-
-	dvbdemux = &dev->demux;
-	dvbdemux->filternum = 256;
-	dvbdemux->feednum = 256;
-	dvbdemux->start_feed = dm1105_start_feed;
-	dvbdemux->stop_feed = dm1105_stop_feed;
-	dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
-			DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
-	ret = dvb_dmx_init(dvbdemux);
-	if (ret < 0)
-		goto err_dvb_unregister_adapter;
-
-	dmx = &dvbdemux->dmx;
-	dev->dmxdev.filternum = 256;
-	dev->dmxdev.demux = dmx;
-	dev->dmxdev.capabilities = 0;
-
-	ret = dvb_dmxdev_init(&dev->dmxdev, dvb_adapter);
-	if (ret < 0)
-		goto err_dvb_dmx_release;
-
-	dev->hw_frontend.source = DMX_FRONTEND_0;
-
-	ret = dmx->add_frontend(dmx, &dev->hw_frontend);
-	if (ret < 0)
-		goto err_dvb_dmxdev_release;
-
-	dev->mem_frontend.source = DMX_MEMORY_FE;
-
-	ret = dmx->add_frontend(dmx, &dev->mem_frontend);
-	if (ret < 0)
-		goto err_remove_hw_frontend;
-
-	ret = dmx->connect_frontend(dmx, &dev->hw_frontend);
-	if (ret < 0)
-		goto err_remove_mem_frontend;
-
-	ret = dvb_net_init(dvb_adapter, &dev->dvbnet, dmx);
-	if (ret < 0)
-		goto err_disconnect_frontend;
-
-	ret = frontend_init(dev);
-	if (ret < 0)
-		goto err_dvb_net;
-
-	dm1105_ir_init(dev);
-
-	INIT_WORK(&dev->work, dm1105_dmx_buffer);
-	sprintf(dev->wqn, "%s/%d", dvb_adapter->name, dvb_adapter->num);
-	dev->wq = create_singlethread_workqueue(dev->wqn);
-	if (!dev->wq)
-		goto err_dvb_net;
-
-	ret = request_irq(pdev->irq, dm1105_irq, IRQF_SHARED,
-						DRIVER_NAME, dev);
-	if (ret < 0)
-		goto err_workqueue;
-
-	return 0;
-
-err_workqueue:
-	destroy_workqueue(dev->wq);
-err_dvb_net:
-	dvb_net_release(&dev->dvbnet);
-err_disconnect_frontend:
-	dmx->disconnect_frontend(dmx);
-err_remove_mem_frontend:
-	dmx->remove_frontend(dmx, &dev->mem_frontend);
-err_remove_hw_frontend:
-	dmx->remove_frontend(dmx, &dev->hw_frontend);
-err_dvb_dmxdev_release:
-	dvb_dmxdev_release(&dev->dmxdev);
-err_dvb_dmx_release:
-	dvb_dmx_release(dvbdemux);
-err_dvb_unregister_adapter:
-	dvb_unregister_adapter(dvb_adapter);
-err_i2c_del_adapters:
-	i2c_del_adapter(&dev->i2c_bb_adap);
-err_i2c_del_adapter:
-	i2c_del_adapter(&dev->i2c_adap);
-err_dm1105_hw_exit:
-	dm1105_hw_exit(dev);
-err_pci_iounmap:
-	pci_iounmap(pdev, dev->io_mem);
-err_pci_release_regions:
-	pci_release_regions(pdev);
-err_pci_disable_device:
-	pci_disable_device(pdev);
-err_kfree:
-	pci_set_drvdata(pdev, NULL);
-	kfree(dev);
-	return ret;
-}
-
-static void __devexit dm1105_remove(struct pci_dev *pdev)
-{
-	struct dm1105_dev *dev = pci_get_drvdata(pdev);
-	struct dvb_adapter *dvb_adapter = &dev->dvb_adapter;
-	struct dvb_demux *dvbdemux = &dev->demux;
-	struct dmx_demux *dmx = &dvbdemux->dmx;
-
-	dm1105_ir_exit(dev);
-	dmx->close(dmx);
-	dvb_net_release(&dev->dvbnet);
-	if (dev->fe)
-		dvb_unregister_frontend(dev->fe);
-
-	dmx->disconnect_frontend(dmx);
-	dmx->remove_frontend(dmx, &dev->mem_frontend);
-	dmx->remove_frontend(dmx, &dev->hw_frontend);
-	dvb_dmxdev_release(&dev->dmxdev);
-	dvb_dmx_release(dvbdemux);
-	dvb_unregister_adapter(dvb_adapter);
-	if (&dev->i2c_adap)
-		i2c_del_adapter(&dev->i2c_adap);
-
-	dm1105_hw_exit(dev);
-	synchronize_irq(pdev->irq);
-	free_irq(pdev->irq, dev);
-	pci_iounmap(pdev, dev->io_mem);
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-	pci_set_drvdata(pdev, NULL);
-	dm1105_devcount--;
-	kfree(dev);
-}
-
-static struct pci_device_id dm1105_id_table[] __devinitdata = {
-	{
-		.vendor = PCI_VENDOR_ID_TRIGEM,
-		.device = PCI_DEVICE_ID_DM1105,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-	}, {
-		.vendor = PCI_VENDOR_ID_AXESS,
-		.device = PCI_DEVICE_ID_DM05,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-	}, {
-		/* empty */
-	},
-};
-
-MODULE_DEVICE_TABLE(pci, dm1105_id_table);
-
-static struct pci_driver dm1105_driver = {
-	.name = DRIVER_NAME,
-	.id_table = dm1105_id_table,
-	.probe = dm1105_probe,
-	.remove = __devexit_p(dm1105_remove),
-};
-
-static int __init dm1105_init(void)
-{
-	return pci_register_driver(&dm1105_driver);
-}
-
-static void __exit dm1105_exit(void)
-{
-	pci_unregister_driver(&dm1105_driver);
-}
-
-module_init(dm1105_init);
-module_exit(dm1105_exit);
-
-MODULE_AUTHOR("Igor M. Liplianin <liplianin@me.by>");
-MODULE_DESCRIPTION("SDMC DM1105 DVB driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-core/Makefile b/drivers/media/dvb/dvb-core/Makefile
deleted file mode 100644
index 8f22bcd..0000000
--- a/drivers/media/dvb/dvb-core/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the kernel DVB device drivers.
-#
-
-dvb-net-$(CONFIG_DVB_NET) := dvb_net.o
-
-dvb-core-objs := dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o 	\
-		 dvb_ca_en50221.o dvb_frontend.o 		\
-		 $(dvb-net-y) dvb_ringbuffer.o dvb_math.o
-
-obj-$(CONFIG_DVB_CORE) += dvb-core.o
diff --git a/drivers/media/dvb/dvb-core/demux.h b/drivers/media/dvb/dvb-core/demux.h
deleted file mode 100644
index eb91fd8..0000000
--- a/drivers/media/dvb/dvb-core/demux.h
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * demux.h
- *
- * Copyright (c) 2002 Convergence GmbH
- *
- * based on code:
- * Copyright (c) 2000 Nokia Research Center
- *                    Tampere, FINLAND
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#ifndef __DEMUX_H
-#define __DEMUX_H
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/time.h>
-#include <linux/dvb/dmx.h>
-
-/*--------------------------------------------------------------------------*/
-/* Common definitions */
-/*--------------------------------------------------------------------------*/
-
-/*
- * DMX_MAX_FILTER_SIZE: Maximum length (in bytes) of a section/PES filter.
- */
-
-#ifndef DMX_MAX_FILTER_SIZE
-#define DMX_MAX_FILTER_SIZE 18
-#endif
-
-/*
- * DMX_MAX_SECFEED_SIZE: Maximum length (in bytes) of a private section feed filter.
- */
-
-#ifndef DMX_MAX_SECTION_SIZE
-#define DMX_MAX_SECTION_SIZE 4096
-#endif
-#ifndef DMX_MAX_SECFEED_SIZE
-#define DMX_MAX_SECFEED_SIZE (DMX_MAX_SECTION_SIZE + 188)
-#endif
-
-
-/*
- * enum dmx_success: Success codes for the Demux Callback API.
- */
-
-enum dmx_success {
-  DMX_OK = 0, /* Received Ok */
-  DMX_LENGTH_ERROR, /* Incorrect length */
-  DMX_OVERRUN_ERROR, /* Receiver ring buffer overrun */
-  DMX_CRC_ERROR, /* Incorrect CRC */
-  DMX_FRAME_ERROR, /* Frame alignment error */
-  DMX_FIFO_ERROR, /* Receiver FIFO overrun */
-  DMX_MISSED_ERROR /* Receiver missed packet */
-} ;
-
-/*--------------------------------------------------------------------------*/
-/* TS packet reception */
-/*--------------------------------------------------------------------------*/
-
-/* TS filter type for set() */
-
-#define TS_PACKET       1   /* send TS packets (188 bytes) to callback (default) */
-#define	TS_PAYLOAD_ONLY 2   /* in case TS_PACKET is set, only send the TS
-			       payload (<=184 bytes per packet) to callback */
-#define TS_DECODER      4   /* send stream to built-in decoder (if present) */
-#define TS_DEMUX        8   /* in case TS_PACKET is set, send the TS to
-			       the demux device, not to the dvr device */
-
-/* PES type for filters which write to built-in decoder */
-/* these should be kept identical to the types in dmx.h */
-
-enum dmx_ts_pes
-{  /* also send packets to decoder (if it exists) */
-	DMX_TS_PES_AUDIO0,
-	DMX_TS_PES_VIDEO0,
-	DMX_TS_PES_TELETEXT0,
-	DMX_TS_PES_SUBTITLE0,
-	DMX_TS_PES_PCR0,
-
-	DMX_TS_PES_AUDIO1,
-	DMX_TS_PES_VIDEO1,
-	DMX_TS_PES_TELETEXT1,
-	DMX_TS_PES_SUBTITLE1,
-	DMX_TS_PES_PCR1,
-
-	DMX_TS_PES_AUDIO2,
-	DMX_TS_PES_VIDEO2,
-	DMX_TS_PES_TELETEXT2,
-	DMX_TS_PES_SUBTITLE2,
-	DMX_TS_PES_PCR2,
-
-	DMX_TS_PES_AUDIO3,
-	DMX_TS_PES_VIDEO3,
-	DMX_TS_PES_TELETEXT3,
-	DMX_TS_PES_SUBTITLE3,
-	DMX_TS_PES_PCR3,
-
-	DMX_TS_PES_OTHER
-};
-
-#define DMX_TS_PES_AUDIO    DMX_TS_PES_AUDIO0
-#define DMX_TS_PES_VIDEO    DMX_TS_PES_VIDEO0
-#define DMX_TS_PES_TELETEXT DMX_TS_PES_TELETEXT0
-#define DMX_TS_PES_SUBTITLE DMX_TS_PES_SUBTITLE0
-#define DMX_TS_PES_PCR      DMX_TS_PES_PCR0
-
-
-struct dmx_ts_feed {
-	int is_filtering; /* Set to non-zero when filtering in progress */
-	struct dmx_demux *parent; /* Back-pointer */
-	void *priv; /* Pointer to private data of the API client */
-	int (*set) (struct dmx_ts_feed *feed,
-		    u16 pid,
-		    int type,
-		    enum dmx_ts_pes pes_type,
-		    size_t circular_buffer_size,
-		    struct timespec timeout);
-	int (*start_filtering) (struct dmx_ts_feed* feed);
-	int (*stop_filtering) (struct dmx_ts_feed* feed);
-};
-
-/*--------------------------------------------------------------------------*/
-/* Section reception */
-/*--------------------------------------------------------------------------*/
-
-struct dmx_section_filter {
-	u8 filter_value [DMX_MAX_FILTER_SIZE];
-	u8 filter_mask [DMX_MAX_FILTER_SIZE];
-	u8 filter_mode [DMX_MAX_FILTER_SIZE];
-	struct dmx_section_feed* parent; /* Back-pointer */
-	void* priv; /* Pointer to private data of the API client */
-};
-
-struct dmx_section_feed {
-	int is_filtering; /* Set to non-zero when filtering in progress */
-	struct dmx_demux* parent; /* Back-pointer */
-	void* priv; /* Pointer to private data of the API client */
-
-	int check_crc;
-	u32 crc_val;
-
-	u8 *secbuf;
-	u8 secbuf_base[DMX_MAX_SECFEED_SIZE];
-	u16 secbufp, seclen, tsfeedp;
-
-	int (*set) (struct dmx_section_feed* feed,
-		    u16 pid,
-		    size_t circular_buffer_size,
-		    int check_crc);
-	int (*allocate_filter) (struct dmx_section_feed* feed,
-				struct dmx_section_filter** filter);
-	int (*release_filter) (struct dmx_section_feed* feed,
-			       struct dmx_section_filter* filter);
-	int (*start_filtering) (struct dmx_section_feed* feed);
-	int (*stop_filtering) (struct dmx_section_feed* feed);
-};
-
-/*--------------------------------------------------------------------------*/
-/* Callback functions */
-/*--------------------------------------------------------------------------*/
-
-typedef int (*dmx_ts_cb) ( const u8 * buffer1,
-			   size_t buffer1_length,
-			   const u8 * buffer2,
-			   size_t buffer2_length,
-			   struct dmx_ts_feed* source,
-			   enum dmx_success success);
-
-typedef int (*dmx_section_cb) (	const u8 * buffer1,
-				size_t buffer1_len,
-				const u8 * buffer2,
-				size_t buffer2_len,
-				struct dmx_section_filter * source,
-				enum dmx_success success);
-
-/*--------------------------------------------------------------------------*/
-/* DVB Front-End */
-/*--------------------------------------------------------------------------*/
-
-enum dmx_frontend_source {
-	DMX_MEMORY_FE,
-	DMX_FRONTEND_0,
-	DMX_FRONTEND_1,
-	DMX_FRONTEND_2,
-	DMX_FRONTEND_3,
-	DMX_STREAM_0,    /* external stream input, e.g. LVDS */
-	DMX_STREAM_1,
-	DMX_STREAM_2,
-	DMX_STREAM_3
-};
-
-struct dmx_frontend {
-	struct list_head connectivity_list; /* List of front-ends that can
-					       be connected to a particular
-					       demux */
-	enum dmx_frontend_source source;
-};
-
-/*--------------------------------------------------------------------------*/
-/* MPEG-2 TS Demux */
-/*--------------------------------------------------------------------------*/
-
-/*
- * Flags OR'ed in the capabilities field of struct dmx_demux.
- */
-
-#define DMX_TS_FILTERING                        1
-#define DMX_PES_FILTERING                       2
-#define DMX_SECTION_FILTERING                   4
-#define DMX_MEMORY_BASED_FILTERING              8    /* write() available */
-#define DMX_CRC_CHECKING                        16
-#define DMX_TS_DESCRAMBLING                     32
-
-/*
- * Demux resource type identifier.
-*/
-
-/*
- * DMX_FE_ENTRY(): Casts elements in the list of registered
- * front-ends from the generic type struct list_head
- * to the type * struct dmx_frontend
- *.
-*/
-
-#define DMX_FE_ENTRY(list) list_entry(list, struct dmx_frontend, connectivity_list)
-
-struct dmx_demux {
-	u32 capabilities;            /* Bitfield of capability flags */
-	struct dmx_frontend* frontend;    /* Front-end connected to the demux */
-	void* priv;                  /* Pointer to private data of the API client */
-	int (*open) (struct dmx_demux* demux);
-	int (*close) (struct dmx_demux* demux);
-	int (*write) (struct dmx_demux* demux, const char __user *buf, size_t count);
-	int (*allocate_ts_feed) (struct dmx_demux* demux,
-				 struct dmx_ts_feed** feed,
-				 dmx_ts_cb callback);
-	int (*release_ts_feed) (struct dmx_demux* demux,
-				struct dmx_ts_feed* feed);
-	int (*allocate_section_feed) (struct dmx_demux* demux,
-				      struct dmx_section_feed** feed,
-				      dmx_section_cb callback);
-	int (*release_section_feed) (struct dmx_demux* demux,
-				     struct dmx_section_feed* feed);
-	int (*add_frontend) (struct dmx_demux* demux,
-			     struct dmx_frontend* frontend);
-	int (*remove_frontend) (struct dmx_demux* demux,
-				struct dmx_frontend* frontend);
-	struct list_head* (*get_frontends) (struct dmx_demux* demux);
-	int (*connect_frontend) (struct dmx_demux* demux,
-				 struct dmx_frontend* frontend);
-	int (*disconnect_frontend) (struct dmx_demux* demux);
-
-	int (*get_pes_pids) (struct dmx_demux* demux, u16 *pids);
-
-	int (*get_caps) (struct dmx_demux* demux, struct dmx_caps *caps);
-
-	int (*set_source) (struct dmx_demux* demux, const dmx_source_t *src);
-
-	int (*get_stc) (struct dmx_demux* demux, unsigned int num,
-			u64 *stc, unsigned int *base);
-};
-
-#endif /* #ifndef __DEMUX_H */
diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
deleted file mode 100644
index 73970cd..0000000
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ /dev/null
@@ -1,1277 +0,0 @@
-/*
- * dmxdev.c - DVB demultiplexer device
- *
- * Copyright (C) 2000 Ralph Metzler & Marcus Metzler
- *		      for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/module.h>
-#include <linux/poll.h>
-#include <linux/ioctl.h>
-#include <linux/wait.h>
-#include <asm/uaccess.h>
-#include "dmxdev.h"
-
-static int debug;
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
-
-#define dprintk	if (debug) printk
-
-static int dvb_dmxdev_buffer_write(struct dvb_ringbuffer *buf,
-				   const u8 *src, size_t len)
-{
-	ssize_t free;
-
-	if (!len)
-		return 0;
-	if (!buf->data)
-		return 0;
-
-	free = dvb_ringbuffer_free(buf);
-	if (len > free) {
-		dprintk("dmxdev: buffer overflow\n");
-		return -EOVERFLOW;
-	}
-
-	return dvb_ringbuffer_write(buf, src, len);
-}
-
-static ssize_t dvb_dmxdev_buffer_read(struct dvb_ringbuffer *src,
-				      int non_blocking, char __user *buf,
-				      size_t count, loff_t *ppos)
-{
-	size_t todo;
-	ssize_t avail;
-	ssize_t ret = 0;
-
-	if (!src->data)
-		return 0;
-
-	if (src->error) {
-		ret = src->error;
-		dvb_ringbuffer_flush(src);
-		return ret;
-	}
-
-	for (todo = count; todo > 0; todo -= ret) {
-		if (non_blocking && dvb_ringbuffer_empty(src)) {
-			ret = -EWOULDBLOCK;
-			break;
-		}
-
-		ret = wait_event_interruptible(src->queue,
-					       !dvb_ringbuffer_empty(src) ||
-					       (src->error != 0));
-		if (ret < 0)
-			break;
-
-		if (src->error) {
-			ret = src->error;
-			dvb_ringbuffer_flush(src);
-			break;
-		}
-
-		avail = dvb_ringbuffer_avail(src);
-		if (avail > todo)
-			avail = todo;
-
-		ret = dvb_ringbuffer_read_user(src, buf, avail);
-		if (ret < 0)
-			break;
-
-		buf += ret;
-	}
-
-	return (count - todo) ? (count - todo) : ret;
-}
-
-static struct dmx_frontend *get_fe(struct dmx_demux *demux, int type)
-{
-	struct list_head *head, *pos;
-
-	head = demux->get_frontends(demux);
-	if (!head)
-		return NULL;
-	list_for_each(pos, head)
-		if (DMX_FE_ENTRY(pos)->source == type)
-			return DMX_FE_ENTRY(pos);
-
-	return NULL;
-}
-
-static int dvb_dvr_open(struct inode *inode, struct file *file)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dmxdev *dmxdev = dvbdev->priv;
-	struct dmx_frontend *front;
-
-	dprintk("function : %s\n", __func__);
-
-	if (mutex_lock_interruptible(&dmxdev->mutex))
-		return -ERESTARTSYS;
-
-	if (dmxdev->exit) {
-		mutex_unlock(&dmxdev->mutex);
-		return -ENODEV;
-	}
-
-	if ((file->f_flags & O_ACCMODE) == O_RDWR) {
-		if (!(dmxdev->capabilities & DMXDEV_CAP_DUPLEX)) {
-			mutex_unlock(&dmxdev->mutex);
-			return -EOPNOTSUPP;
-		}
-	}
-
-	if ((file->f_flags & O_ACCMODE) == O_RDONLY) {
-		void *mem;
-		if (!dvbdev->readers) {
-			mutex_unlock(&dmxdev->mutex);
-			return -EBUSY;
-		}
-		mem = vmalloc(DVR_BUFFER_SIZE);
-		if (!mem) {
-			mutex_unlock(&dmxdev->mutex);
-			return -ENOMEM;
-		}
-		dvb_ringbuffer_init(&dmxdev->dvr_buffer, mem, DVR_BUFFER_SIZE);
-		dvbdev->readers--;
-	}
-
-	if ((file->f_flags & O_ACCMODE) == O_WRONLY) {
-		dmxdev->dvr_orig_fe = dmxdev->demux->frontend;
-
-		if (!dmxdev->demux->write) {
-			mutex_unlock(&dmxdev->mutex);
-			return -EOPNOTSUPP;
-		}
-
-		front = get_fe(dmxdev->demux, DMX_MEMORY_FE);
-
-		if (!front) {
-			mutex_unlock(&dmxdev->mutex);
-			return -EINVAL;
-		}
-		dmxdev->demux->disconnect_frontend(dmxdev->demux);
-		dmxdev->demux->connect_frontend(dmxdev->demux, front);
-	}
-	dvbdev->users++;
-	mutex_unlock(&dmxdev->mutex);
-	return 0;
-}
-
-static int dvb_dvr_release(struct inode *inode, struct file *file)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dmxdev *dmxdev = dvbdev->priv;
-
-	mutex_lock(&dmxdev->mutex);
-
-	if ((file->f_flags & O_ACCMODE) == O_WRONLY) {
-		dmxdev->demux->disconnect_frontend(dmxdev->demux);
-		dmxdev->demux->connect_frontend(dmxdev->demux,
-						dmxdev->dvr_orig_fe);
-	}
-	if ((file->f_flags & O_ACCMODE) == O_RDONLY) {
-		dvbdev->readers++;
-		if (dmxdev->dvr_buffer.data) {
-			void *mem = dmxdev->dvr_buffer.data;
-			mb();
-			spin_lock_irq(&dmxdev->lock);
-			dmxdev->dvr_buffer.data = NULL;
-			spin_unlock_irq(&dmxdev->lock);
-			vfree(mem);
-		}
-	}
-	/* TODO */
-	dvbdev->users--;
-	if (dvbdev->users == 1 && dmxdev->exit == 1) {
-		fops_put(file->f_op);
-		file->f_op = NULL;
-		mutex_unlock(&dmxdev->mutex);
-		wake_up(&dvbdev->wait_queue);
-	} else
-		mutex_unlock(&dmxdev->mutex);
-
-	return 0;
-}
-
-static ssize_t dvb_dvr_write(struct file *file, const char __user *buf,
-			     size_t count, loff_t *ppos)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dmxdev *dmxdev = dvbdev->priv;
-	int ret;
-
-	if (!dmxdev->demux->write)
-		return -EOPNOTSUPP;
-	if ((file->f_flags & O_ACCMODE) != O_WRONLY)
-		return -EINVAL;
-	if (mutex_lock_interruptible(&dmxdev->mutex))
-		return -ERESTARTSYS;
-
-	if (dmxdev->exit) {
-		mutex_unlock(&dmxdev->mutex);
-		return -ENODEV;
-	}
-	ret = dmxdev->demux->write(dmxdev->demux, buf, count);
-	mutex_unlock(&dmxdev->mutex);
-	return ret;
-}
-
-static ssize_t dvb_dvr_read(struct file *file, char __user *buf, size_t count,
-			    loff_t *ppos)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dmxdev *dmxdev = dvbdev->priv;
-
-	if (dmxdev->exit)
-		return -ENODEV;
-
-	return dvb_dmxdev_buffer_read(&dmxdev->dvr_buffer,
-				      file->f_flags & O_NONBLOCK,
-				      buf, count, ppos);
-}
-
-static int dvb_dvr_set_buffer_size(struct dmxdev *dmxdev,
-				      unsigned long size)
-{
-	struct dvb_ringbuffer *buf = &dmxdev->dvr_buffer;
-	void *newmem;
-	void *oldmem;
-
-	dprintk("function : %s\n", __func__);
-
-	if (buf->size == size)
-		return 0;
-	if (!size)
-		return -EINVAL;
-
-	newmem = vmalloc(size);
-	if (!newmem)
-		return -ENOMEM;
-
-	oldmem = buf->data;
-
-	spin_lock_irq(&dmxdev->lock);
-	buf->data = newmem;
-	buf->size = size;
-
-	/* reset and not flush in case the buffer shrinks */
-	dvb_ringbuffer_reset(buf);
-	spin_unlock_irq(&dmxdev->lock);
-
-	vfree(oldmem);
-
-	return 0;
-}
-
-static inline void dvb_dmxdev_filter_state_set(struct dmxdev_filter
-					       *dmxdevfilter, int state)
-{
-	spin_lock_irq(&dmxdevfilter->dev->lock);
-	dmxdevfilter->state = state;
-	spin_unlock_irq(&dmxdevfilter->dev->lock);
-}
-
-static int dvb_dmxdev_set_buffer_size(struct dmxdev_filter *dmxdevfilter,
-				      unsigned long size)
-{
-	struct dvb_ringbuffer *buf = &dmxdevfilter->buffer;
-	void *newmem;
-	void *oldmem;
-
-	if (buf->size == size)
-		return 0;
-	if (!size)
-		return -EINVAL;
-	if (dmxdevfilter->state >= DMXDEV_STATE_GO)
-		return -EBUSY;
-
-	newmem = vmalloc(size);
-	if (!newmem)
-		return -ENOMEM;
-
-	oldmem = buf->data;
-
-	spin_lock_irq(&dmxdevfilter->dev->lock);
-	buf->data = newmem;
-	buf->size = size;
-
-	/* reset and not flush in case the buffer shrinks */
-	dvb_ringbuffer_reset(buf);
-	spin_unlock_irq(&dmxdevfilter->dev->lock);
-
-	vfree(oldmem);
-
-	return 0;
-}
-
-static void dvb_dmxdev_filter_timeout(unsigned long data)
-{
-	struct dmxdev_filter *dmxdevfilter = (struct dmxdev_filter *)data;
-
-	dmxdevfilter->buffer.error = -ETIMEDOUT;
-	spin_lock_irq(&dmxdevfilter->dev->lock);
-	dmxdevfilter->state = DMXDEV_STATE_TIMEDOUT;
-	spin_unlock_irq(&dmxdevfilter->dev->lock);
-	wake_up(&dmxdevfilter->buffer.queue);
-}
-
-static void dvb_dmxdev_filter_timer(struct dmxdev_filter *dmxdevfilter)
-{
-	struct dmx_sct_filter_params *para = &dmxdevfilter->params.sec;
-
-	del_timer(&dmxdevfilter->timer);
-	if (para->timeout) {
-		dmxdevfilter->timer.function = dvb_dmxdev_filter_timeout;
-		dmxdevfilter->timer.data = (unsigned long)dmxdevfilter;
-		dmxdevfilter->timer.expires =
-		    jiffies + 1 + (HZ / 2 + HZ * para->timeout) / 1000;
-		add_timer(&dmxdevfilter->timer);
-	}
-}
-
-static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len,
-				       const u8 *buffer2, size_t buffer2_len,
-				       struct dmx_section_filter *filter,
-				       enum dmx_success success)
-{
-	struct dmxdev_filter *dmxdevfilter = filter->priv;
-	int ret;
-
-	if (dmxdevfilter->buffer.error) {
-		wake_up(&dmxdevfilter->buffer.queue);
-		return 0;
-	}
-	spin_lock(&dmxdevfilter->dev->lock);
-	if (dmxdevfilter->state != DMXDEV_STATE_GO) {
-		spin_unlock(&dmxdevfilter->dev->lock);
-		return 0;
-	}
-	del_timer(&dmxdevfilter->timer);
-	dprintk("dmxdev: section callback %02x %02x %02x %02x %02x %02x\n",
-		buffer1[0], buffer1[1],
-		buffer1[2], buffer1[3], buffer1[4], buffer1[5]);
-	ret = dvb_dmxdev_buffer_write(&dmxdevfilter->buffer, buffer1,
-				      buffer1_len);
-	if (ret == buffer1_len) {
-		ret = dvb_dmxdev_buffer_write(&dmxdevfilter->buffer, buffer2,
-					      buffer2_len);
-	}
-	if (ret < 0) {
-		dvb_ringbuffer_flush(&dmxdevfilter->buffer);
-		dmxdevfilter->buffer.error = ret;
-	}
-	if (dmxdevfilter->params.sec.flags & DMX_ONESHOT)
-		dmxdevfilter->state = DMXDEV_STATE_DONE;
-	spin_unlock(&dmxdevfilter->dev->lock);
-	wake_up(&dmxdevfilter->buffer.queue);
-	return 0;
-}
-
-static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len,
-				  const u8 *buffer2, size_t buffer2_len,
-				  struct dmx_ts_feed *feed,
-				  enum dmx_success success)
-{
-	struct dmxdev_filter *dmxdevfilter = feed->priv;
-	struct dvb_ringbuffer *buffer;
-	int ret;
-
-	spin_lock(&dmxdevfilter->dev->lock);
-	if (dmxdevfilter->params.pes.output == DMX_OUT_DECODER) {
-		spin_unlock(&dmxdevfilter->dev->lock);
-		return 0;
-	}
-
-	if (dmxdevfilter->params.pes.output == DMX_OUT_TAP
-	    || dmxdevfilter->params.pes.output == DMX_OUT_TSDEMUX_TAP)
-		buffer = &dmxdevfilter->buffer;
-	else
-		buffer = &dmxdevfilter->dev->dvr_buffer;
-	if (buffer->error) {
-		spin_unlock(&dmxdevfilter->dev->lock);
-		wake_up(&buffer->queue);
-		return 0;
-	}
-	ret = dvb_dmxdev_buffer_write(buffer, buffer1, buffer1_len);
-	if (ret == buffer1_len)
-		ret = dvb_dmxdev_buffer_write(buffer, buffer2, buffer2_len);
-	if (ret < 0) {
-		dvb_ringbuffer_flush(buffer);
-		buffer->error = ret;
-	}
-	spin_unlock(&dmxdevfilter->dev->lock);
-	wake_up(&buffer->queue);
-	return 0;
-}
-
-/* stop feed but only mark the specified filter as stopped (state set) */
-static int dvb_dmxdev_feed_stop(struct dmxdev_filter *dmxdevfilter)
-{
-	struct dmxdev_feed *feed;
-
-	dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_SET);
-
-	switch (dmxdevfilter->type) {
-	case DMXDEV_TYPE_SEC:
-		del_timer(&dmxdevfilter->timer);
-		dmxdevfilter->feed.sec->stop_filtering(dmxdevfilter->feed.sec);
-		break;
-	case DMXDEV_TYPE_PES:
-		list_for_each_entry(feed, &dmxdevfilter->feed.ts, next)
-			feed->ts->stop_filtering(feed->ts);
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-/* start feed associated with the specified filter */
-static int dvb_dmxdev_feed_start(struct dmxdev_filter *filter)
-{
-	struct dmxdev_feed *feed;
-	int ret;
-
-	dvb_dmxdev_filter_state_set(filter, DMXDEV_STATE_GO);
-
-	switch (filter->type) {
-	case DMXDEV_TYPE_SEC:
-		return filter->feed.sec->start_filtering(filter->feed.sec);
-	case DMXDEV_TYPE_PES:
-		list_for_each_entry(feed, &filter->feed.ts, next) {
-			ret = feed->ts->start_filtering(feed->ts);
-			if (ret < 0) {
-				dvb_dmxdev_feed_stop(filter);
-				return ret;
-			}
-		}
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/* restart section feed if it has filters left associated with it,
-   otherwise release the feed */
-static int dvb_dmxdev_feed_restart(struct dmxdev_filter *filter)
-{
-	int i;
-	struct dmxdev *dmxdev = filter->dev;
-	u16 pid = filter->params.sec.pid;
-
-	for (i = 0; i < dmxdev->filternum; i++)
-		if (dmxdev->filter[i].state >= DMXDEV_STATE_GO &&
-		    dmxdev->filter[i].type == DMXDEV_TYPE_SEC &&
-		    dmxdev->filter[i].params.sec.pid == pid) {
-			dvb_dmxdev_feed_start(&dmxdev->filter[i]);
-			return 0;
-		}
-
-	filter->dev->demux->release_section_feed(dmxdev->demux,
-						 filter->feed.sec);
-
-	return 0;
-}
-
-static int dvb_dmxdev_filter_stop(struct dmxdev_filter *dmxdevfilter)
-{
-	struct dmxdev_feed *feed;
-	struct dmx_demux *demux;
-
-	if (dmxdevfilter->state < DMXDEV_STATE_GO)
-		return 0;
-
-	switch (dmxdevfilter->type) {
-	case DMXDEV_TYPE_SEC:
-		if (!dmxdevfilter->feed.sec)
-			break;
-		dvb_dmxdev_feed_stop(dmxdevfilter);
-		if (dmxdevfilter->filter.sec)
-			dmxdevfilter->feed.sec->
-			    release_filter(dmxdevfilter->feed.sec,
-					   dmxdevfilter->filter.sec);
-		dvb_dmxdev_feed_restart(dmxdevfilter);
-		dmxdevfilter->feed.sec = NULL;
-		break;
-	case DMXDEV_TYPE_PES:
-		dvb_dmxdev_feed_stop(dmxdevfilter);
-		demux = dmxdevfilter->dev->demux;
-		list_for_each_entry(feed, &dmxdevfilter->feed.ts, next) {
-			demux->release_ts_feed(demux, feed->ts);
-			feed->ts = NULL;
-		}
-		break;
-	default:
-		if (dmxdevfilter->state == DMXDEV_STATE_ALLOCATED)
-			return 0;
-		return -EINVAL;
-	}
-
-	dvb_ringbuffer_flush(&dmxdevfilter->buffer);
-	return 0;
-}
-
-static void dvb_dmxdev_delete_pids(struct dmxdev_filter *dmxdevfilter)
-{
-	struct dmxdev_feed *feed, *tmp;
-
-	/* delete all PIDs */
-	list_for_each_entry_safe(feed, tmp, &dmxdevfilter->feed.ts, next) {
-		list_del(&feed->next);
-		kfree(feed);
-	}
-
-	BUG_ON(!list_empty(&dmxdevfilter->feed.ts));
-}
-
-static inline int dvb_dmxdev_filter_reset(struct dmxdev_filter *dmxdevfilter)
-{
-	if (dmxdevfilter->state < DMXDEV_STATE_SET)
-		return 0;
-
-	if (dmxdevfilter->type == DMXDEV_TYPE_PES)
-		dvb_dmxdev_delete_pids(dmxdevfilter);
-
-	dmxdevfilter->type = DMXDEV_TYPE_NONE;
-	dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_ALLOCATED);
-	return 0;
-}
-
-static int dvb_dmxdev_start_feed(struct dmxdev *dmxdev,
-				 struct dmxdev_filter *filter,
-				 struct dmxdev_feed *feed)
-{
-	struct timespec timeout = { 0 };
-	struct dmx_pes_filter_params *para = &filter->params.pes;
-	dmx_output_t otype;
-	int ret;
-	int ts_type;
-	dmx_pes_type_t ts_pes;
-	struct dmx_ts_feed *tsfeed;
-
-	feed->ts = NULL;
-	otype = para->output;
-
-	ts_pes = para->pes_type;
-
-	if (ts_pes < DMX_PES_OTHER)
-		ts_type = TS_DECODER;
-	else
-		ts_type = 0;
-
-	if (otype == DMX_OUT_TS_TAP)
-		ts_type |= TS_PACKET;
-	else if (otype == DMX_OUT_TSDEMUX_TAP)
-		ts_type |= TS_PACKET | TS_DEMUX;
-	else if (otype == DMX_OUT_TAP)
-		ts_type |= TS_PACKET | TS_DEMUX | TS_PAYLOAD_ONLY;
-
-	ret = dmxdev->demux->allocate_ts_feed(dmxdev->demux, &feed->ts,
-					      dvb_dmxdev_ts_callback);
-	if (ret < 0)
-		return ret;
-
-	tsfeed = feed->ts;
-	tsfeed->priv = filter;
-
-	ret = tsfeed->set(tsfeed, feed->pid, ts_type, ts_pes, 32768, timeout);
-	if (ret < 0) {
-		dmxdev->demux->release_ts_feed(dmxdev->demux, tsfeed);
-		return ret;
-	}
-
-	ret = tsfeed->start_filtering(tsfeed);
-	if (ret < 0) {
-		dmxdev->demux->release_ts_feed(dmxdev->demux, tsfeed);
-		return ret;
-	}
-
-	return 0;
-}
-
-static int dvb_dmxdev_filter_start(struct dmxdev_filter *filter)
-{
-	struct dmxdev *dmxdev = filter->dev;
-	struct dmxdev_feed *feed;
-	void *mem;
-	int ret, i;
-
-	if (filter->state < DMXDEV_STATE_SET)
-		return -EINVAL;
-
-	if (filter->state >= DMXDEV_STATE_GO)
-		dvb_dmxdev_filter_stop(filter);
-
-	if (!filter->buffer.data) {
-		mem = vmalloc(filter->buffer.size);
-		if (!mem)
-			return -ENOMEM;
-		spin_lock_irq(&filter->dev->lock);
-		filter->buffer.data = mem;
-		spin_unlock_irq(&filter->dev->lock);
-	}
-
-	dvb_ringbuffer_flush(&filter->buffer);
-
-	switch (filter->type) {
-	case DMXDEV_TYPE_SEC:
-	{
-		struct dmx_sct_filter_params *para = &filter->params.sec;
-		struct dmx_section_filter **secfilter = &filter->filter.sec;
-		struct dmx_section_feed **secfeed = &filter->feed.sec;
-
-		*secfilter = NULL;
-		*secfeed = NULL;
-
-
-		/* find active filter/feed with same PID */
-		for (i = 0; i < dmxdev->filternum; i++) {
-			if (dmxdev->filter[i].state >= DMXDEV_STATE_GO &&
-			    dmxdev->filter[i].type == DMXDEV_TYPE_SEC &&
-			    dmxdev->filter[i].params.sec.pid == para->pid) {
-				*secfeed = dmxdev->filter[i].feed.sec;
-				break;
-			}
-		}
-
-		/* if no feed found, try to allocate new one */
-		if (!*secfeed) {
-			ret = dmxdev->demux->allocate_section_feed(dmxdev->demux,
-								   secfeed,
-								   dvb_dmxdev_section_callback);
-			if (ret < 0) {
-				printk("DVB (%s): could not alloc feed\n",
-				       __func__);
-				return ret;
-			}
-
-			ret = (*secfeed)->set(*secfeed, para->pid, 32768,
-					      (para->flags & DMX_CHECK_CRC) ? 1 : 0);
-			if (ret < 0) {
-				printk("DVB (%s): could not set feed\n",
-				       __func__);
-				dvb_dmxdev_feed_restart(filter);
-				return ret;
-			}
-		} else {
-			dvb_dmxdev_feed_stop(filter);
-		}
-
-		ret = (*secfeed)->allocate_filter(*secfeed, secfilter);
-		if (ret < 0) {
-			dvb_dmxdev_feed_restart(filter);
-			filter->feed.sec->start_filtering(*secfeed);
-			dprintk("could not get filter\n");
-			return ret;
-		}
-
-		(*secfilter)->priv = filter;
-
-		memcpy(&((*secfilter)->filter_value[3]),
-		       &(para->filter.filter[1]), DMX_FILTER_SIZE - 1);
-		memcpy(&(*secfilter)->filter_mask[3],
-		       &para->filter.mask[1], DMX_FILTER_SIZE - 1);
-		memcpy(&(*secfilter)->filter_mode[3],
-		       &para->filter.mode[1], DMX_FILTER_SIZE - 1);
-
-		(*secfilter)->filter_value[0] = para->filter.filter[0];
-		(*secfilter)->filter_mask[0] = para->filter.mask[0];
-		(*secfilter)->filter_mode[0] = para->filter.mode[0];
-		(*secfilter)->filter_mask[1] = 0;
-		(*secfilter)->filter_mask[2] = 0;
-
-		filter->todo = 0;
-
-		ret = filter->feed.sec->start_filtering(filter->feed.sec);
-		if (ret < 0)
-			return ret;
-
-		dvb_dmxdev_filter_timer(filter);
-		break;
-	}
-	case DMXDEV_TYPE_PES:
-		list_for_each_entry(feed, &filter->feed.ts, next) {
-			ret = dvb_dmxdev_start_feed(dmxdev, filter, feed);
-			if (ret < 0) {
-				dvb_dmxdev_filter_stop(filter);
-				return ret;
-			}
-		}
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	dvb_dmxdev_filter_state_set(filter, DMXDEV_STATE_GO);
-	return 0;
-}
-
-static int dvb_demux_open(struct inode *inode, struct file *file)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dmxdev *dmxdev = dvbdev->priv;
-	int i;
-	struct dmxdev_filter *dmxdevfilter;
-
-	if (!dmxdev->filter)
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&dmxdev->mutex))
-		return -ERESTARTSYS;
-
-	for (i = 0; i < dmxdev->filternum; i++)
-		if (dmxdev->filter[i].state == DMXDEV_STATE_FREE)
-			break;
-
-	if (i == dmxdev->filternum) {
-		mutex_unlock(&dmxdev->mutex);
-		return -EMFILE;
-	}
-
-	dmxdevfilter = &dmxdev->filter[i];
-	mutex_init(&dmxdevfilter->mutex);
-	file->private_data = dmxdevfilter;
-
-	dvb_ringbuffer_init(&dmxdevfilter->buffer, NULL, 8192);
-	dmxdevfilter->type = DMXDEV_TYPE_NONE;
-	dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_ALLOCATED);
-	init_timer(&dmxdevfilter->timer);
-
-	dvbdev->users++;
-
-	mutex_unlock(&dmxdev->mutex);
-	return 0;
-}
-
-static int dvb_dmxdev_filter_free(struct dmxdev *dmxdev,
-				  struct dmxdev_filter *dmxdevfilter)
-{
-	mutex_lock(&dmxdev->mutex);
-	mutex_lock(&dmxdevfilter->mutex);
-
-	dvb_dmxdev_filter_stop(dmxdevfilter);
-	dvb_dmxdev_filter_reset(dmxdevfilter);
-
-	if (dmxdevfilter->buffer.data) {
-		void *mem = dmxdevfilter->buffer.data;
-
-		spin_lock_irq(&dmxdev->lock);
-		dmxdevfilter->buffer.data = NULL;
-		spin_unlock_irq(&dmxdev->lock);
-		vfree(mem);
-	}
-
-	dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_FREE);
-	wake_up(&dmxdevfilter->buffer.queue);
-	mutex_unlock(&dmxdevfilter->mutex);
-	mutex_unlock(&dmxdev->mutex);
-	return 0;
-}
-
-static inline void invert_mode(dmx_filter_t *filter)
-{
-	int i;
-
-	for (i = 0; i < DMX_FILTER_SIZE; i++)
-		filter->mode[i] ^= 0xff;
-}
-
-static int dvb_dmxdev_add_pid(struct dmxdev *dmxdev,
-			      struct dmxdev_filter *filter, u16 pid)
-{
-	struct dmxdev_feed *feed;
-
-	if ((filter->type != DMXDEV_TYPE_PES) ||
-	    (filter->state < DMXDEV_STATE_SET))
-		return -EINVAL;
-
-	/* only TS packet filters may have multiple PIDs */
-	if ((filter->params.pes.output != DMX_OUT_TSDEMUX_TAP) &&
-	    (!list_empty(&filter->feed.ts)))
-		return -EINVAL;
-
-	feed = kzalloc(sizeof(struct dmxdev_feed), GFP_KERNEL);
-	if (feed == NULL)
-		return -ENOMEM;
-
-	feed->pid = pid;
-	list_add(&feed->next, &filter->feed.ts);
-
-	if (filter->state >= DMXDEV_STATE_GO)
-		return dvb_dmxdev_start_feed(dmxdev, filter, feed);
-
-	return 0;
-}
-
-static int dvb_dmxdev_remove_pid(struct dmxdev *dmxdev,
-				  struct dmxdev_filter *filter, u16 pid)
-{
-	struct dmxdev_feed *feed, *tmp;
-
-	if ((filter->type != DMXDEV_TYPE_PES) ||
-	    (filter->state < DMXDEV_STATE_SET))
-		return -EINVAL;
-
-	list_for_each_entry_safe(feed, tmp, &filter->feed.ts, next) {
-		if ((feed->pid == pid) && (feed->ts != NULL)) {
-			feed->ts->stop_filtering(feed->ts);
-			filter->dev->demux->release_ts_feed(filter->dev->demux,
-							    feed->ts);
-			list_del(&feed->next);
-			kfree(feed);
-		}
-	}
-
-	return 0;
-}
-
-static int dvb_dmxdev_filter_set(struct dmxdev *dmxdev,
-				 struct dmxdev_filter *dmxdevfilter,
-				 struct dmx_sct_filter_params *params)
-{
-	dprintk("function : %s\n", __func__);
-
-	dvb_dmxdev_filter_stop(dmxdevfilter);
-
-	dmxdevfilter->type = DMXDEV_TYPE_SEC;
-	memcpy(&dmxdevfilter->params.sec,
-	       params, sizeof(struct dmx_sct_filter_params));
-	invert_mode(&dmxdevfilter->params.sec.filter);
-	dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_SET);
-
-	if (params->flags & DMX_IMMEDIATE_START)
-		return dvb_dmxdev_filter_start(dmxdevfilter);
-
-	return 0;
-}
-
-static int dvb_dmxdev_pes_filter_set(struct dmxdev *dmxdev,
-				     struct dmxdev_filter *dmxdevfilter,
-				     struct dmx_pes_filter_params *params)
-{
-	int ret;
-
-	dvb_dmxdev_filter_stop(dmxdevfilter);
-	dvb_dmxdev_filter_reset(dmxdevfilter);
-
-	if (params->pes_type > DMX_PES_OTHER || params->pes_type < 0)
-		return -EINVAL;
-
-	dmxdevfilter->type = DMXDEV_TYPE_PES;
-	memcpy(&dmxdevfilter->params, params,
-	       sizeof(struct dmx_pes_filter_params));
-	INIT_LIST_HEAD(&dmxdevfilter->feed.ts);
-
-	dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_SET);
-
-	ret = dvb_dmxdev_add_pid(dmxdev, dmxdevfilter,
-				 dmxdevfilter->params.pes.pid);
-	if (ret < 0)
-		return ret;
-
-	if (params->flags & DMX_IMMEDIATE_START)
-		return dvb_dmxdev_filter_start(dmxdevfilter);
-
-	return 0;
-}
-
-static ssize_t dvb_dmxdev_read_sec(struct dmxdev_filter *dfil,
-				   struct file *file, char __user *buf,
-				   size_t count, loff_t *ppos)
-{
-	int result, hcount;
-	int done = 0;
-
-	if (dfil->todo <= 0) {
-		hcount = 3 + dfil->todo;
-		if (hcount > count)
-			hcount = count;
-		result = dvb_dmxdev_buffer_read(&dfil->buffer,
-						file->f_flags & O_NONBLOCK,
-						buf, hcount, ppos);
-		if (result < 0) {
-			dfil->todo = 0;
-			return result;
-		}
-		if (copy_from_user(dfil->secheader - dfil->todo, buf, result))
-			return -EFAULT;
-		buf += result;
-		done = result;
-		count -= result;
-		dfil->todo -= result;
-		if (dfil->todo > -3)
-			return done;
-		dfil->todo = ((dfil->secheader[1] << 8) | dfil->secheader[2]) & 0xfff;
-		if (!count)
-			return done;
-	}
-	if (count > dfil->todo)
-		count = dfil->todo;
-	result = dvb_dmxdev_buffer_read(&dfil->buffer,
-					file->f_flags & O_NONBLOCK,
-					buf, count, ppos);
-	if (result < 0)
-		return result;
-	dfil->todo -= result;
-	return (result + done);
-}
-
-static ssize_t
-dvb_demux_read(struct file *file, char __user *buf, size_t count,
-	       loff_t *ppos)
-{
-	struct dmxdev_filter *dmxdevfilter = file->private_data;
-	int ret;
-
-	if (mutex_lock_interruptible(&dmxdevfilter->mutex))
-		return -ERESTARTSYS;
-
-	if (dmxdevfilter->type == DMXDEV_TYPE_SEC)
-		ret = dvb_dmxdev_read_sec(dmxdevfilter, file, buf, count, ppos);
-	else
-		ret = dvb_dmxdev_buffer_read(&dmxdevfilter->buffer,
-					     file->f_flags & O_NONBLOCK,
-					     buf, count, ppos);
-
-	mutex_unlock(&dmxdevfilter->mutex);
-	return ret;
-}
-
-static int dvb_demux_do_ioctl(struct file *file,
-			      unsigned int cmd, void *parg)
-{
-	struct dmxdev_filter *dmxdevfilter = file->private_data;
-	struct dmxdev *dmxdev = dmxdevfilter->dev;
-	unsigned long arg = (unsigned long)parg;
-	int ret = 0;
-
-	if (mutex_lock_interruptible(&dmxdev->mutex))
-		return -ERESTARTSYS;
-
-	switch (cmd) {
-	case DMX_START:
-		if (mutex_lock_interruptible(&dmxdevfilter->mutex)) {
-			mutex_unlock(&dmxdev->mutex);
-			return -ERESTARTSYS;
-		}
-		if (dmxdevfilter->state < DMXDEV_STATE_SET)
-			ret = -EINVAL;
-		else
-			ret = dvb_dmxdev_filter_start(dmxdevfilter);
-		mutex_unlock(&dmxdevfilter->mutex);
-		break;
-
-	case DMX_STOP:
-		if (mutex_lock_interruptible(&dmxdevfilter->mutex)) {
-			mutex_unlock(&dmxdev->mutex);
-			return -ERESTARTSYS;
-		}
-		ret = dvb_dmxdev_filter_stop(dmxdevfilter);
-		mutex_unlock(&dmxdevfilter->mutex);
-		break;
-
-	case DMX_SET_FILTER:
-		if (mutex_lock_interruptible(&dmxdevfilter->mutex)) {
-			mutex_unlock(&dmxdev->mutex);
-			return -ERESTARTSYS;
-		}
-		ret = dvb_dmxdev_filter_set(dmxdev, dmxdevfilter, parg);
-		mutex_unlock(&dmxdevfilter->mutex);
-		break;
-
-	case DMX_SET_PES_FILTER:
-		if (mutex_lock_interruptible(&dmxdevfilter->mutex)) {
-			mutex_unlock(&dmxdev->mutex);
-			return -ERESTARTSYS;
-		}
-		ret = dvb_dmxdev_pes_filter_set(dmxdev, dmxdevfilter, parg);
-		mutex_unlock(&dmxdevfilter->mutex);
-		break;
-
-	case DMX_SET_BUFFER_SIZE:
-		if (mutex_lock_interruptible(&dmxdevfilter->mutex)) {
-			mutex_unlock(&dmxdev->mutex);
-			return -ERESTARTSYS;
-		}
-		ret = dvb_dmxdev_set_buffer_size(dmxdevfilter, arg);
-		mutex_unlock(&dmxdevfilter->mutex);
-		break;
-
-	case DMX_GET_PES_PIDS:
-		if (!dmxdev->demux->get_pes_pids) {
-			ret = -EINVAL;
-			break;
-		}
-		dmxdev->demux->get_pes_pids(dmxdev->demux, parg);
-		break;
-
-	case DMX_GET_CAPS:
-		if (!dmxdev->demux->get_caps) {
-			ret = -EINVAL;
-			break;
-		}
-		ret = dmxdev->demux->get_caps(dmxdev->demux, parg);
-		break;
-
-	case DMX_SET_SOURCE:
-		if (!dmxdev->demux->set_source) {
-			ret = -EINVAL;
-			break;
-		}
-		ret = dmxdev->demux->set_source(dmxdev->demux, parg);
-		break;
-
-	case DMX_GET_STC:
-		if (!dmxdev->demux->get_stc) {
-			ret = -EINVAL;
-			break;
-		}
-		ret = dmxdev->demux->get_stc(dmxdev->demux,
-					     ((struct dmx_stc *)parg)->num,
-					     &((struct dmx_stc *)parg)->stc,
-					     &((struct dmx_stc *)parg)->base);
-		break;
-
-	case DMX_ADD_PID:
-		if (mutex_lock_interruptible(&dmxdevfilter->mutex)) {
-			ret = -ERESTARTSYS;
-			break;
-		}
-		ret = dvb_dmxdev_add_pid(dmxdev, dmxdevfilter, *(u16 *)parg);
-		mutex_unlock(&dmxdevfilter->mutex);
-		break;
-
-	case DMX_REMOVE_PID:
-		if (mutex_lock_interruptible(&dmxdevfilter->mutex)) {
-			ret = -ERESTARTSYS;
-			break;
-		}
-		ret = dvb_dmxdev_remove_pid(dmxdev, dmxdevfilter, *(u16 *)parg);
-		mutex_unlock(&dmxdevfilter->mutex);
-		break;
-
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	mutex_unlock(&dmxdev->mutex);
-	return ret;
-}
-
-static long dvb_demux_ioctl(struct file *file, unsigned int cmd,
-			    unsigned long arg)
-{
-	return dvb_usercopy(file, cmd, arg, dvb_demux_do_ioctl);
-}
-
-static unsigned int dvb_demux_poll(struct file *file, poll_table *wait)
-{
-	struct dmxdev_filter *dmxdevfilter = file->private_data;
-	unsigned int mask = 0;
-
-	if (!dmxdevfilter)
-		return -EINVAL;
-
-	poll_wait(file, &dmxdevfilter->buffer.queue, wait);
-
-	if (dmxdevfilter->state != DMXDEV_STATE_GO &&
-	    dmxdevfilter->state != DMXDEV_STATE_DONE &&
-	    dmxdevfilter->state != DMXDEV_STATE_TIMEDOUT)
-		return 0;
-
-	if (dmxdevfilter->buffer.error)
-		mask |= (POLLIN | POLLRDNORM | POLLPRI | POLLERR);
-
-	if (!dvb_ringbuffer_empty(&dmxdevfilter->buffer))
-		mask |= (POLLIN | POLLRDNORM | POLLPRI);
-
-	return mask;
-}
-
-static int dvb_demux_release(struct inode *inode, struct file *file)
-{
-	struct dmxdev_filter *dmxdevfilter = file->private_data;
-	struct dmxdev *dmxdev = dmxdevfilter->dev;
-
-	int ret;
-
-	ret = dvb_dmxdev_filter_free(dmxdev, dmxdevfilter);
-
-	mutex_lock(&dmxdev->mutex);
-	dmxdev->dvbdev->users--;
-	if(dmxdev->dvbdev->users==1 && dmxdev->exit==1) {
-		fops_put(file->f_op);
-		file->f_op = NULL;
-		mutex_unlock(&dmxdev->mutex);
-		wake_up(&dmxdev->dvbdev->wait_queue);
-	} else
-		mutex_unlock(&dmxdev->mutex);
-
-	return ret;
-}
-
-static const struct file_operations dvb_demux_fops = {
-	.owner = THIS_MODULE,
-	.read = dvb_demux_read,
-	.unlocked_ioctl = dvb_demux_ioctl,
-	.open = dvb_demux_open,
-	.release = dvb_demux_release,
-	.poll = dvb_demux_poll,
-	.llseek = default_llseek,
-};
-
-static struct dvb_device dvbdev_demux = {
-	.priv = NULL,
-	.users = 1,
-	.writers = 1,
-	.fops = &dvb_demux_fops
-};
-
-static int dvb_dvr_do_ioctl(struct file *file,
-			    unsigned int cmd, void *parg)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dmxdev *dmxdev = dvbdev->priv;
-	unsigned long arg = (unsigned long)parg;
-	int ret;
-
-	if (mutex_lock_interruptible(&dmxdev->mutex))
-		return -ERESTARTSYS;
-
-	switch (cmd) {
-	case DMX_SET_BUFFER_SIZE:
-		ret = dvb_dvr_set_buffer_size(dmxdev, arg);
-		break;
-
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	mutex_unlock(&dmxdev->mutex);
-	return ret;
-}
-
-static long dvb_dvr_ioctl(struct file *file,
-			 unsigned int cmd, unsigned long arg)
-{
-	return dvb_usercopy(file, cmd, arg, dvb_dvr_do_ioctl);
-}
-
-static unsigned int dvb_dvr_poll(struct file *file, poll_table *wait)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dmxdev *dmxdev = dvbdev->priv;
-	unsigned int mask = 0;
-
-	dprintk("function : %s\n", __func__);
-
-	poll_wait(file, &dmxdev->dvr_buffer.queue, wait);
-
-	if ((file->f_flags & O_ACCMODE) == O_RDONLY) {
-		if (dmxdev->dvr_buffer.error)
-			mask |= (POLLIN | POLLRDNORM | POLLPRI | POLLERR);
-
-		if (!dvb_ringbuffer_empty(&dmxdev->dvr_buffer))
-			mask |= (POLLIN | POLLRDNORM | POLLPRI);
-	} else
-		mask |= (POLLOUT | POLLWRNORM | POLLPRI);
-
-	return mask;
-}
-
-static const struct file_operations dvb_dvr_fops = {
-	.owner = THIS_MODULE,
-	.read = dvb_dvr_read,
-	.write = dvb_dvr_write,
-	.unlocked_ioctl = dvb_dvr_ioctl,
-	.open = dvb_dvr_open,
-	.release = dvb_dvr_release,
-	.poll = dvb_dvr_poll,
-	.llseek = default_llseek,
-};
-
-static struct dvb_device dvbdev_dvr = {
-	.priv = NULL,
-	.readers = 1,
-	.users = 1,
-	.fops = &dvb_dvr_fops
-};
-
-int dvb_dmxdev_init(struct dmxdev *dmxdev, struct dvb_adapter *dvb_adapter)
-{
-	int i;
-
-	if (dmxdev->demux->open(dmxdev->demux) < 0)
-		return -EUSERS;
-
-	dmxdev->filter = vmalloc(dmxdev->filternum * sizeof(struct dmxdev_filter));
-	if (!dmxdev->filter)
-		return -ENOMEM;
-
-	mutex_init(&dmxdev->mutex);
-	spin_lock_init(&dmxdev->lock);
-	for (i = 0; i < dmxdev->filternum; i++) {
-		dmxdev->filter[i].dev = dmxdev;
-		dmxdev->filter[i].buffer.data = NULL;
-		dvb_dmxdev_filter_state_set(&dmxdev->filter[i],
-					    DMXDEV_STATE_FREE);
-	}
-
-	dvb_register_device(dvb_adapter, &dmxdev->dvbdev, &dvbdev_demux, dmxdev,
-			    DVB_DEVICE_DEMUX);
-	dvb_register_device(dvb_adapter, &dmxdev->dvr_dvbdev, &dvbdev_dvr,
-			    dmxdev, DVB_DEVICE_DVR);
-
-	dvb_ringbuffer_init(&dmxdev->dvr_buffer, NULL, 8192);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dvb_dmxdev_init);
-
-void dvb_dmxdev_release(struct dmxdev *dmxdev)
-{
-	dmxdev->exit=1;
-	if (dmxdev->dvbdev->users > 1) {
-		wait_event(dmxdev->dvbdev->wait_queue,
-				dmxdev->dvbdev->users==1);
-	}
-	if (dmxdev->dvr_dvbdev->users > 1) {
-		wait_event(dmxdev->dvr_dvbdev->wait_queue,
-				dmxdev->dvr_dvbdev->users==1);
-	}
-
-	dvb_unregister_device(dmxdev->dvbdev);
-	dvb_unregister_device(dmxdev->dvr_dvbdev);
-
-	vfree(dmxdev->filter);
-	dmxdev->filter = NULL;
-	dmxdev->demux->close(dmxdev->demux);
-}
-
-EXPORT_SYMBOL(dvb_dmxdev_release);
diff --git a/drivers/media/dvb/dvb-core/dmxdev.h b/drivers/media/dvb/dvb-core/dmxdev.h
deleted file mode 100644
index 02ebe28..0000000
--- a/drivers/media/dvb/dvb-core/dmxdev.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * dmxdev.h
- *
- * Copyright (C) 2000 Ralph Metzler & Marcus Metzler
- *                    for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#ifndef _DMXDEV_H_
-#define _DMXDEV_H_
-
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/wait.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-
-#include <linux/dvb/dmx.h>
-
-#include "dvbdev.h"
-#include "demux.h"
-#include "dvb_ringbuffer.h"
-
-enum dmxdev_type {
-	DMXDEV_TYPE_NONE,
-	DMXDEV_TYPE_SEC,
-	DMXDEV_TYPE_PES,
-};
-
-enum dmxdev_state {
-	DMXDEV_STATE_FREE,
-	DMXDEV_STATE_ALLOCATED,
-	DMXDEV_STATE_SET,
-	DMXDEV_STATE_GO,
-	DMXDEV_STATE_DONE,
-	DMXDEV_STATE_TIMEDOUT
-};
-
-struct dmxdev_feed {
-	u16 pid;
-	struct dmx_ts_feed *ts;
-	struct list_head next;
-};
-
-struct dmxdev_filter {
-	union {
-		struct dmx_section_filter *sec;
-	} filter;
-
-	union {
-		/* list of TS and PES feeds (struct dmxdev_feed) */
-		struct list_head ts;
-		struct dmx_section_feed *sec;
-	} feed;
-
-	union {
-		struct dmx_sct_filter_params sec;
-		struct dmx_pes_filter_params pes;
-	} params;
-
-	enum dmxdev_type type;
-	enum dmxdev_state state;
-	struct dmxdev *dev;
-	struct dvb_ringbuffer buffer;
-
-	struct mutex mutex;
-
-	/* only for sections */
-	struct timer_list timer;
-	int todo;
-	u8 secheader[3];
-};
-
-
-struct dmxdev {
-	struct dvb_device *dvbdev;
-	struct dvb_device *dvr_dvbdev;
-
-	struct dmxdev_filter *filter;
-	struct dmx_demux *demux;
-
-	int filternum;
-	int capabilities;
-
-	unsigned int exit:1;
-#define DMXDEV_CAP_DUPLEX 1
-	struct dmx_frontend *dvr_orig_fe;
-
-	struct dvb_ringbuffer dvr_buffer;
-#define DVR_BUFFER_SIZE (10*188*1024)
-
-	struct mutex mutex;
-	spinlock_t lock;
-};
-
-
-int dvb_dmxdev_init(struct dmxdev *dmxdev, struct dvb_adapter *);
-void dvb_dmxdev_release(struct dmxdev *dmxdev);
-
-#endif /* _DMXDEV_H_ */
diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
deleted file mode 100644
index 9be65a3..0000000
--- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
+++ /dev/null
@@ -1,1753 +0,0 @@
-/*
- * dvb_ca.c: generic DVB functions for EN50221 CAM interfaces
- *
- * Copyright (C) 2004 Andrew de Quincey
- *
- * Parts of this file were based on sources as follows:
- *
- * Copyright (C) 2003 Ralph Metzler <rjkm@metzlerbros.de>
- *
- * based on code:
- *
- * Copyright (C) 1999-2002 Ralph  Metzler
- *                       & Marcus Metzler for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/vmalloc.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/kthread.h>
-
-#include "dvb_ca_en50221.h"
-#include "dvb_ringbuffer.h"
-
-static int dvb_ca_en50221_debug;
-
-module_param_named(cam_debug, dvb_ca_en50221_debug, int, 0644);
-MODULE_PARM_DESC(cam_debug, "enable verbose debug messages");
-
-#define dprintk if (dvb_ca_en50221_debug) printk
-
-#define INIT_TIMEOUT_SECS 10
-
-#define HOST_LINK_BUF_SIZE 0x200
-
-#define RX_BUFFER_SIZE 65535
-
-#define MAX_RX_PACKETS_PER_ITERATION 10
-
-#define CTRLIF_DATA      0
-#define CTRLIF_COMMAND   1
-#define CTRLIF_STATUS    1
-#define CTRLIF_SIZE_LOW  2
-#define CTRLIF_SIZE_HIGH 3
-
-#define CMDREG_HC        1	/* Host control */
-#define CMDREG_SW        2	/* Size write */
-#define CMDREG_SR        4	/* Size read */
-#define CMDREG_RS        8	/* Reset interface */
-#define CMDREG_FRIE   0x40	/* Enable FR interrupt */
-#define CMDREG_DAIE   0x80	/* Enable DA interrupt */
-#define IRQEN (CMDREG_DAIE)
-
-#define STATUSREG_RE     1	/* read error */
-#define STATUSREG_WE     2	/* write error */
-#define STATUSREG_FR  0x40	/* module free */
-#define STATUSREG_DA  0x80	/* data available */
-#define STATUSREG_TXERR (STATUSREG_RE|STATUSREG_WE)	/* general transfer error */
-
-
-#define DVB_CA_SLOTSTATE_NONE           0
-#define DVB_CA_SLOTSTATE_UNINITIALISED  1
-#define DVB_CA_SLOTSTATE_RUNNING        2
-#define DVB_CA_SLOTSTATE_INVALID        3
-#define DVB_CA_SLOTSTATE_WAITREADY      4
-#define DVB_CA_SLOTSTATE_VALIDATE       5
-#define DVB_CA_SLOTSTATE_WAITFR         6
-#define DVB_CA_SLOTSTATE_LINKINIT       7
-
-
-/* Information on a CA slot */
-struct dvb_ca_slot {
-
-	/* current state of the CAM */
-	int slot_state;
-
-	/* mutex used for serializing access to one CI slot */
-	struct mutex slot_lock;
-
-	/* Number of CAMCHANGES that have occurred since last processing */
-	atomic_t camchange_count;
-
-	/* Type of last CAMCHANGE */
-	int camchange_type;
-
-	/* base address of CAM config */
-	u32 config_base;
-
-	/* value to write into Config Control register */
-	u8 config_option;
-
-	/* if 1, the CAM supports DA IRQs */
-	u8 da_irq_supported:1;
-
-	/* size of the buffer to use when talking to the CAM */
-	int link_buf_size;
-
-	/* buffer for incoming packets */
-	struct dvb_ringbuffer rx_buffer;
-
-	/* timer used during various states of the slot */
-	unsigned long timeout;
-};
-
-/* Private CA-interface information */
-struct dvb_ca_private {
-
-	/* pointer back to the public data structure */
-	struct dvb_ca_en50221 *pub;
-
-	/* the DVB device */
-	struct dvb_device *dvbdev;
-
-	/* Flags describing the interface (DVB_CA_FLAG_*) */
-	u32 flags;
-
-	/* number of slots supported by this CA interface */
-	unsigned int slot_count;
-
-	/* information on each slot */
-	struct dvb_ca_slot *slot_info;
-
-	/* wait queues for read() and write() operations */
-	wait_queue_head_t wait_queue;
-
-	/* PID of the monitoring thread */
-	struct task_struct *thread;
-
-	/* Flag indicating if the CA device is open */
-	unsigned int open:1;
-
-	/* Flag indicating the thread should wake up now */
-	unsigned int wakeup:1;
-
-	/* Delay the main thread should use */
-	unsigned long delay;
-
-	/* Slot to start looking for data to read from in the next user-space read operation */
-	int next_read_slot;
-};
-
-static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca);
-static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot, u8 * ebuf, int ecount);
-static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * ebuf, int ecount);
-
-
-/**
- * Safely find needle in haystack.
- *
- * @param haystack Buffer to look in.
- * @param hlen Number of bytes in haystack.
- * @param needle Buffer to find.
- * @param nlen Number of bytes in needle.
- * @return Pointer into haystack needle was found at, or NULL if not found.
- */
-static char *findstr(char * haystack, int hlen, char * needle, int nlen)
-{
-	int i;
-
-	if (hlen < nlen)
-		return NULL;
-
-	for (i = 0; i <= hlen - nlen; i++) {
-		if (!strncmp(haystack + i, needle, nlen))
-			return haystack + i;
-	}
-
-	return NULL;
-}
-
-
-
-/* ******************************************************************************** */
-/* EN50221 physical interface functions */
-
-
-/**
- * Check CAM status.
- */
-static int dvb_ca_en50221_check_camstatus(struct dvb_ca_private *ca, int slot)
-{
-	int slot_status;
-	int cam_present_now;
-	int cam_changed;
-
-	/* IRQ mode */
-	if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE) {
-		return (atomic_read(&ca->slot_info[slot].camchange_count) != 0);
-	}
-
-	/* poll mode */
-	slot_status = ca->pub->poll_slot_status(ca->pub, slot, ca->open);
-
-	cam_present_now = (slot_status & DVB_CA_EN50221_POLL_CAM_PRESENT) ? 1 : 0;
-	cam_changed = (slot_status & DVB_CA_EN50221_POLL_CAM_CHANGED) ? 1 : 0;
-	if (!cam_changed) {
-		int cam_present_old = (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE);
-		cam_changed = (cam_present_now != cam_present_old);
-	}
-
-	if (cam_changed) {
-		if (!cam_present_now) {
-			ca->slot_info[slot].camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED;
-		} else {
-			ca->slot_info[slot].camchange_type = DVB_CA_EN50221_CAMCHANGE_INSERTED;
-		}
-		atomic_set(&ca->slot_info[slot].camchange_count, 1);
-	} else {
-		if ((ca->slot_info[slot].slot_state == DVB_CA_SLOTSTATE_WAITREADY) &&
-		    (slot_status & DVB_CA_EN50221_POLL_CAM_READY)) {
-			// move to validate state if reset is completed
-			ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_VALIDATE;
-		}
-	}
-
-	return cam_changed;
-}
-
-
-/**
- * Wait for flags to become set on the STATUS register on a CAM interface,
- * checking for errors and timeout.
- *
- * @param ca CA instance.
- * @param slot Slot on interface.
- * @param waitfor Flags to wait for.
- * @param timeout_ms Timeout in milliseconds.
- *
- * @return 0 on success, nonzero on error.
- */
-static int dvb_ca_en50221_wait_if_status(struct dvb_ca_private *ca, int slot,
-					 u8 waitfor, int timeout_hz)
-{
-	unsigned long timeout;
-	unsigned long start;
-
-	dprintk("%s\n", __func__);
-
-	/* loop until timeout elapsed */
-	start = jiffies;
-	timeout = jiffies + timeout_hz;
-	while (1) {
-		/* read the status and check for error */
-		int res = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS);
-		if (res < 0)
-			return -EIO;
-
-		/* if we got the flags, it was successful! */
-		if (res & waitfor) {
-			dprintk("%s succeeded timeout:%lu\n", __func__, jiffies - start);
-			return 0;
-		}
-
-		/* check for timeout */
-		if (time_after(jiffies, timeout)) {
-			break;
-		}
-
-		/* wait for a bit */
-		msleep(1);
-	}
-
-	dprintk("%s failed timeout:%lu\n", __func__, jiffies - start);
-
-	/* if we get here, we've timed out */
-	return -ETIMEDOUT;
-}
-
-
-/**
- * Initialise the link layer connection to a CAM.
- *
- * @param ca CA instance.
- * @param slot Slot id.
- *
- * @return 0 on success, nonzero on failure.
- */
-static int dvb_ca_en50221_link_init(struct dvb_ca_private *ca, int slot)
-{
-	int ret;
-	int buf_size;
-	u8 buf[2];
-
-	dprintk("%s\n", __func__);
-
-	/* we'll be determining these during this function */
-	ca->slot_info[slot].da_irq_supported = 0;
-
-	/* set the host link buffer size temporarily. it will be overwritten with the
-	 * real negotiated size later. */
-	ca->slot_info[slot].link_buf_size = 2;
-
-	/* read the buffer size from the CAM */
-	if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_SR)) != 0)
-		return ret;
-	if ((ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_DA, HZ / 10)) != 0)
-		return ret;
-	if ((ret = dvb_ca_en50221_read_data(ca, slot, buf, 2)) != 2)
-		return -EIO;
-	if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN)) != 0)
-		return ret;
-
-	/* store it, and choose the minimum of our buffer and the CAM's buffer size */
-	buf_size = (buf[0] << 8) | buf[1];
-	if (buf_size > HOST_LINK_BUF_SIZE)
-		buf_size = HOST_LINK_BUF_SIZE;
-	ca->slot_info[slot].link_buf_size = buf_size;
-	buf[0] = buf_size >> 8;
-	buf[1] = buf_size & 0xff;
-	dprintk("Chosen link buffer size of %i\n", buf_size);
-
-	/* write the buffer size to the CAM */
-	if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_SW)) != 0)
-		return ret;
-	if ((ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_FR, HZ / 10)) != 0)
-		return ret;
-	if ((ret = dvb_ca_en50221_write_data(ca, slot, buf, 2)) != 2)
-		return -EIO;
-	if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN)) != 0)
-		return ret;
-
-	/* success */
-	return 0;
-}
-
-/**
- * Read a tuple from attribute memory.
- *
- * @param ca CA instance.
- * @param slot Slot id.
- * @param address Address to read from. Updated.
- * @param tupleType Tuple id byte. Updated.
- * @param tupleLength Tuple length. Updated.
- * @param tuple Dest buffer for tuple (must be 256 bytes). Updated.
- *
- * @return 0 on success, nonzero on error.
- */
-static int dvb_ca_en50221_read_tuple(struct dvb_ca_private *ca, int slot,
-				     int *address, int *tupleType, int *tupleLength, u8 * tuple)
-{
-	int i;
-	int _tupleType;
-	int _tupleLength;
-	int _address = *address;
-
-	/* grab the next tuple length and type */
-	if ((_tupleType = ca->pub->read_attribute_mem(ca->pub, slot, _address)) < 0)
-		return _tupleType;
-	if (_tupleType == 0xff) {
-		dprintk("END OF CHAIN TUPLE type:0x%x\n", _tupleType);
-		*address += 2;
-		*tupleType = _tupleType;
-		*tupleLength = 0;
-		return 0;
-	}
-	if ((_tupleLength = ca->pub->read_attribute_mem(ca->pub, slot, _address + 2)) < 0)
-		return _tupleLength;
-	_address += 4;
-
-	dprintk("TUPLE type:0x%x length:%i\n", _tupleType, _tupleLength);
-
-	/* read in the whole tuple */
-	for (i = 0; i < _tupleLength; i++) {
-		tuple[i] = ca->pub->read_attribute_mem(ca->pub, slot, _address + (i * 2));
-		dprintk("  0x%02x: 0x%02x %c\n",
-			i, tuple[i] & 0xff,
-			((tuple[i] > 31) && (tuple[i] < 127)) ? tuple[i] : '.');
-	}
-	_address += (_tupleLength * 2);
-
-	// success
-	*tupleType = _tupleType;
-	*tupleLength = _tupleLength;
-	*address = _address;
-	return 0;
-}
-
-
-/**
- * Parse attribute memory of a CAM module, extracting Config register, and checking
- * it is a DVB CAM module.
- *
- * @param ca CA instance.
- * @param slot Slot id.
- *
- * @return 0 on success, <0 on failure.
- */
-static int dvb_ca_en50221_parse_attributes(struct dvb_ca_private *ca, int slot)
-{
-	int address = 0;
-	int tupleLength;
-	int tupleType;
-	u8 tuple[257];
-	char *dvb_str;
-	int rasz;
-	int status;
-	int got_cftableentry = 0;
-	int end_chain = 0;
-	int i;
-	u16 manfid = 0;
-	u16 devid = 0;
-
-
-	// CISTPL_DEVICE_0A
-	if ((status =
-	     dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0)
-		return status;
-	if (tupleType != 0x1D)
-		return -EINVAL;
-
-
-
-	// CISTPL_DEVICE_0C
-	if ((status =
-	     dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0)
-		return status;
-	if (tupleType != 0x1C)
-		return -EINVAL;
-
-
-
-	// CISTPL_VERS_1
-	if ((status =
-	     dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0)
-		return status;
-	if (tupleType != 0x15)
-		return -EINVAL;
-
-
-
-	// CISTPL_MANFID
-	if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType,
-						&tupleLength, tuple)) < 0)
-		return status;
-	if (tupleType != 0x20)
-		return -EINVAL;
-	if (tupleLength != 4)
-		return -EINVAL;
-	manfid = (tuple[1] << 8) | tuple[0];
-	devid = (tuple[3] << 8) | tuple[2];
-
-
-
-	// CISTPL_CONFIG
-	if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType,
-						&tupleLength, tuple)) < 0)
-		return status;
-	if (tupleType != 0x1A)
-		return -EINVAL;
-	if (tupleLength < 3)
-		return -EINVAL;
-
-	/* extract the configbase */
-	rasz = tuple[0] & 3;
-	if (tupleLength < (3 + rasz + 14))
-		return -EINVAL;
-	ca->slot_info[slot].config_base = 0;
-	for (i = 0; i < rasz + 1; i++) {
-		ca->slot_info[slot].config_base |= (tuple[2 + i] << (8 * i));
-	}
-
-	/* check it contains the correct DVB string */
-	dvb_str = findstr((char *)tuple, tupleLength, "DVB_CI_V", 8);
-	if (dvb_str == NULL)
-		return -EINVAL;
-	if (tupleLength < ((dvb_str - (char *) tuple) + 12))
-		return -EINVAL;
-
-	/* is it a version we support? */
-	if (strncmp(dvb_str + 8, "1.00", 4)) {
-		printk("dvb_ca adapter %d: Unsupported DVB CAM module version %c%c%c%c\n",
-		       ca->dvbdev->adapter->num, dvb_str[8], dvb_str[9], dvb_str[10], dvb_str[11]);
-		return -EINVAL;
-	}
-
-	/* process the CFTABLE_ENTRY tuples, and any after those */
-	while ((!end_chain) && (address < 0x1000)) {
-		if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType,
-							&tupleLength, tuple)) < 0)
-			return status;
-		switch (tupleType) {
-		case 0x1B:	// CISTPL_CFTABLE_ENTRY
-			if (tupleLength < (2 + 11 + 17))
-				break;
-
-			/* if we've already parsed one, just use it */
-			if (got_cftableentry)
-				break;
-
-			/* get the config option */
-			ca->slot_info[slot].config_option = tuple[0] & 0x3f;
-
-			/* OK, check it contains the correct strings */
-			if ((findstr((char *)tuple, tupleLength, "DVB_HOST", 8) == NULL) ||
-			    (findstr((char *)tuple, tupleLength, "DVB_CI_MODULE", 13) == NULL))
-				break;
-
-			got_cftableentry = 1;
-			break;
-
-		case 0x14:	// CISTPL_NO_LINK
-			break;
-
-		case 0xFF:	// CISTPL_END
-			end_chain = 1;
-			break;
-
-		default:	/* Unknown tuple type - just skip this tuple and move to the next one */
-			dprintk("dvb_ca: Skipping unknown tuple type:0x%x length:0x%x\n", tupleType,
-				tupleLength);
-			break;
-		}
-	}
-
-	if ((address > 0x1000) || (!got_cftableentry))
-		return -EINVAL;
-
-	dprintk("Valid DVB CAM detected MANID:%x DEVID:%x CONFIGBASE:0x%x CONFIGOPTION:0x%x\n",
-		manfid, devid, ca->slot_info[slot].config_base, ca->slot_info[slot].config_option);
-
-	// success!
-	return 0;
-}
-
-
-/**
- * Set CAM's configoption correctly.
- *
- * @param ca CA instance.
- * @param slot Slot containing the CAM.
- */
-static int dvb_ca_en50221_set_configoption(struct dvb_ca_private *ca, int slot)
-{
-	int configoption;
-
-	dprintk("%s\n", __func__);
-
-	/* set the config option */
-	ca->pub->write_attribute_mem(ca->pub, slot,
-				     ca->slot_info[slot].config_base,
-				     ca->slot_info[slot].config_option);
-
-	/* check it */
-	configoption = ca->pub->read_attribute_mem(ca->pub, slot, ca->slot_info[slot].config_base);
-	dprintk("Set configoption 0x%x, read configoption 0x%x\n",
-		ca->slot_info[slot].config_option, configoption & 0x3f);
-
-	/* fine! */
-	return 0;
-
-}
-
-
-/**
- * This function talks to an EN50221 CAM control interface. It reads a buffer of
- * data from the CAM. The data can either be stored in a supplied buffer, or
- * automatically be added to the slot's rx_buffer.
- *
- * @param ca CA instance.
- * @param slot Slot to read from.
- * @param ebuf If non-NULL, the data will be written to this buffer. If NULL,
- * the data will be added into the buffering system as a normal fragment.
- * @param ecount Size of ebuf. Ignored if ebuf is NULL.
- *
- * @return Number of bytes read, or < 0 on error
- */
-static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot, u8 * ebuf, int ecount)
-{
-	int bytes_read;
-	int status;
-	u8 buf[HOST_LINK_BUF_SIZE];
-	int i;
-
-	dprintk("%s\n", __func__);
-
-	/* check if we have space for a link buf in the rx_buffer */
-	if (ebuf == NULL) {
-		int buf_free;
-
-		if (ca->slot_info[slot].rx_buffer.data == NULL) {
-			status = -EIO;
-			goto exit;
-		}
-		buf_free = dvb_ringbuffer_free(&ca->slot_info[slot].rx_buffer);
-
-		if (buf_free < (ca->slot_info[slot].link_buf_size + DVB_RINGBUFFER_PKTHDRSIZE)) {
-			status = -EAGAIN;
-			goto exit;
-		}
-	}
-
-	/* check if there is data available */
-	if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
-		goto exit;
-	if (!(status & STATUSREG_DA)) {
-		/* no data */
-		status = 0;
-		goto exit;
-	}
-
-	/* read the amount of data */
-	if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_SIZE_HIGH)) < 0)
-		goto exit;
-	bytes_read = status << 8;
-	if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_SIZE_LOW)) < 0)
-		goto exit;
-	bytes_read |= status;
-
-	/* check it will fit */
-	if (ebuf == NULL) {
-		if (bytes_read > ca->slot_info[slot].link_buf_size) {
-			printk("dvb_ca adapter %d: CAM tried to send a buffer larger than the link buffer size (%i > %i)!\n",
-			       ca->dvbdev->adapter->num, bytes_read, ca->slot_info[slot].link_buf_size);
-			ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
-			status = -EIO;
-			goto exit;
-		}
-		if (bytes_read < 2) {
-			printk("dvb_ca adapter %d: CAM sent a buffer that was less than 2 bytes!\n",
-			       ca->dvbdev->adapter->num);
-			ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
-			status = -EIO;
-			goto exit;
-		}
-	} else {
-		if (bytes_read > ecount) {
-			printk("dvb_ca adapter %d: CAM tried to send a buffer larger than the ecount size!\n",
-			       ca->dvbdev->adapter->num);
-			status = -EIO;
-			goto exit;
-		}
-	}
-
-	/* fill the buffer */
-	for (i = 0; i < bytes_read; i++) {
-		/* read byte and check */
-		if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_DATA)) < 0)
-			goto exit;
-
-		/* OK, store it in the buffer */
-		buf[i] = status;
-	}
-
-	/* check for read error (RE should now be 0) */
-	if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
-		goto exit;
-	if (status & STATUSREG_RE) {
-		ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
-		status = -EIO;
-		goto exit;
-	}
-
-	/* OK, add it to the receive buffer, or copy into external buffer if supplied */
-	if (ebuf == NULL) {
-		if (ca->slot_info[slot].rx_buffer.data == NULL) {
-			status = -EIO;
-			goto exit;
-		}
-		dvb_ringbuffer_pkt_write(&ca->slot_info[slot].rx_buffer, buf, bytes_read);
-	} else {
-		memcpy(ebuf, buf, bytes_read);
-	}
-
-	dprintk("Received CA packet for slot %i connection id 0x%x last_frag:%i size:0x%x\n", slot,
-		buf[0], (buf[1] & 0x80) == 0, bytes_read);
-
-	/* wake up readers when a last_fragment is received */
-	if ((buf[1] & 0x80) == 0x00) {
-		wake_up_interruptible(&ca->wait_queue);
-	}
-	status = bytes_read;
-
-exit:
-	return status;
-}
-
-
-/**
- * This function talks to an EN50221 CAM control interface. It writes a buffer of data
- * to a CAM.
- *
- * @param ca CA instance.
- * @param slot Slot to write to.
- * @param ebuf The data in this buffer is treated as a complete link-level packet to
- * be written.
- * @param count Size of ebuf.
- *
- * @return Number of bytes written, or < 0 on error.
- */
-static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * buf, int bytes_write)
-{
-	int status;
-	int i;
-
-	dprintk("%s\n", __func__);
-
-
-	/* sanity check */
-	if (bytes_write > ca->slot_info[slot].link_buf_size)
-		return -EINVAL;
-
-	/* it is possible we are dealing with a single buffer implementation,
-	   thus if there is data available for read or if there is even a read
-	   already in progress, we do nothing but awake the kernel thread to
-	   process the data if necessary. */
-	if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
-		goto exitnowrite;
-	if (status & (STATUSREG_DA | STATUSREG_RE)) {
-		if (status & STATUSREG_DA)
-			dvb_ca_en50221_thread_wakeup(ca);
-
-		status = -EAGAIN;
-		goto exitnowrite;
-	}
-
-	/* OK, set HC bit */
-	if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND,
-						 IRQEN | CMDREG_HC)) != 0)
-		goto exit;
-
-	/* check if interface is still free */
-	if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
-		goto exit;
-	if (!(status & STATUSREG_FR)) {
-		/* it wasn't free => try again later */
-		status = -EAGAIN;
-		goto exit;
-	}
-
-	/* send the amount of data */
-	if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_HIGH, bytes_write >> 8)) != 0)
-		goto exit;
-	if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_LOW,
-						 bytes_write & 0xff)) != 0)
-		goto exit;
-
-	/* send the buffer */
-	for (i = 0; i < bytes_write; i++) {
-		if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_DATA, buf[i])) != 0)
-			goto exit;
-	}
-
-	/* check for write error (WE should now be 0) */
-	if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
-		goto exit;
-	if (status & STATUSREG_WE) {
-		ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
-		status = -EIO;
-		goto exit;
-	}
-	status = bytes_write;
-
-	dprintk("Wrote CA packet for slot %i, connection id 0x%x last_frag:%i size:0x%x\n", slot,
-		buf[0], (buf[1] & 0x80) == 0, bytes_write);
-
-exit:
-	ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN);
-
-exitnowrite:
-	return status;
-}
-EXPORT_SYMBOL(dvb_ca_en50221_camchange_irq);
-
-
-
-/* ******************************************************************************** */
-/* EN50221 higher level functions */
-
-
-/**
- * A CAM has been removed => shut it down.
- *
- * @param ca CA instance.
- * @param slot Slot to shut down.
- */
-static int dvb_ca_en50221_slot_shutdown(struct dvb_ca_private *ca, int slot)
-{
-	dprintk("%s\n", __func__);
-
-	ca->pub->slot_shutdown(ca->pub, slot);
-	ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
-
-	/* need to wake up all processes to check if they're now
-	   trying to write to a defunct CAM */
-	wake_up_interruptible(&ca->wait_queue);
-
-	dprintk("Slot %i shutdown\n", slot);
-
-	/* success */
-	return 0;
-}
-EXPORT_SYMBOL(dvb_ca_en50221_camready_irq);
-
-
-/**
- * A CAMCHANGE IRQ has occurred.
- *
- * @param ca CA instance.
- * @param slot Slot concerned.
- * @param change_type One of the DVB_CA_CAMCHANGE_* values.
- */
-void dvb_ca_en50221_camchange_irq(struct dvb_ca_en50221 *pubca, int slot, int change_type)
-{
-	struct dvb_ca_private *ca = pubca->private;
-
-	dprintk("CAMCHANGE IRQ slot:%i change_type:%i\n", slot, change_type);
-
-	switch (change_type) {
-	case DVB_CA_EN50221_CAMCHANGE_REMOVED:
-	case DVB_CA_EN50221_CAMCHANGE_INSERTED:
-		break;
-
-	default:
-		return;
-	}
-
-	ca->slot_info[slot].camchange_type = change_type;
-	atomic_inc(&ca->slot_info[slot].camchange_count);
-	dvb_ca_en50221_thread_wakeup(ca);
-}
-EXPORT_SYMBOL(dvb_ca_en50221_frda_irq);
-
-
-/**
- * A CAMREADY IRQ has occurred.
- *
- * @param ca CA instance.
- * @param slot Slot concerned.
- */
-void dvb_ca_en50221_camready_irq(struct dvb_ca_en50221 *pubca, int slot)
-{
-	struct dvb_ca_private *ca = pubca->private;
-
-	dprintk("CAMREADY IRQ slot:%i\n", slot);
-
-	if (ca->slot_info[slot].slot_state == DVB_CA_SLOTSTATE_WAITREADY) {
-		ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_VALIDATE;
-		dvb_ca_en50221_thread_wakeup(ca);
-	}
-}
-
-
-/**
- * An FR or DA IRQ has occurred.
- *
- * @param ca CA instance.
- * @param slot Slot concerned.
- */
-void dvb_ca_en50221_frda_irq(struct dvb_ca_en50221 *pubca, int slot)
-{
-	struct dvb_ca_private *ca = pubca->private;
-	int flags;
-
-	dprintk("FR/DA IRQ slot:%i\n", slot);
-
-	switch (ca->slot_info[slot].slot_state) {
-	case DVB_CA_SLOTSTATE_LINKINIT:
-		flags = ca->pub->read_cam_control(pubca, slot, CTRLIF_STATUS);
-		if (flags & STATUSREG_DA) {
-			dprintk("CAM supports DA IRQ\n");
-			ca->slot_info[slot].da_irq_supported = 1;
-		}
-		break;
-
-	case DVB_CA_SLOTSTATE_RUNNING:
-		if (ca->open)
-			dvb_ca_en50221_thread_wakeup(ca);
-		break;
-	}
-}
-
-
-
-/* ******************************************************************************** */
-/* EN50221 thread functions */
-
-/**
- * Wake up the DVB CA thread
- *
- * @param ca CA instance.
- */
-static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca)
-{
-
-	dprintk("%s\n", __func__);
-
-	ca->wakeup = 1;
-	mb();
-	wake_up_process(ca->thread);
-}
-
-/**
- * Update the delay used by the thread.
- *
- * @param ca CA instance.
- */
-static void dvb_ca_en50221_thread_update_delay(struct dvb_ca_private *ca)
-{
-	int delay;
-	int curdelay = 100000000;
-	int slot;
-
-	/* Beware of too high polling frequency, because one polling
-	 * call might take several hundred milliseconds until timeout!
-	 */
-	for (slot = 0; slot < ca->slot_count; slot++) {
-		switch (ca->slot_info[slot].slot_state) {
-		default:
-		case DVB_CA_SLOTSTATE_NONE:
-			delay = HZ * 60;  /* 60s */
-			if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE))
-				delay = HZ * 5;  /* 5s */
-			break;
-		case DVB_CA_SLOTSTATE_INVALID:
-			delay = HZ * 60;  /* 60s */
-			if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE))
-				delay = HZ / 10;  /* 100ms */
-			break;
-
-		case DVB_CA_SLOTSTATE_UNINITIALISED:
-		case DVB_CA_SLOTSTATE_WAITREADY:
-		case DVB_CA_SLOTSTATE_VALIDATE:
-		case DVB_CA_SLOTSTATE_WAITFR:
-		case DVB_CA_SLOTSTATE_LINKINIT:
-			delay = HZ / 10;  /* 100ms */
-			break;
-
-		case DVB_CA_SLOTSTATE_RUNNING:
-			delay = HZ * 60;  /* 60s */
-			if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE))
-				delay = HZ / 10;  /* 100ms */
-			if (ca->open) {
-				if ((!ca->slot_info[slot].da_irq_supported) ||
-				    (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_DA)))
-					delay = HZ / 10;  /* 100ms */
-			}
-			break;
-		}
-
-		if (delay < curdelay)
-			curdelay = delay;
-	}
-
-	ca->delay = curdelay;
-}
-
-
-
-/**
- * Kernel thread which monitors CA slots for CAM changes, and performs data transfers.
- */
-static int dvb_ca_en50221_thread(void *data)
-{
-	struct dvb_ca_private *ca = data;
-	int slot;
-	int flags;
-	int status;
-	int pktcount;
-	void *rxbuf;
-
-	dprintk("%s\n", __func__);
-
-	/* choose the correct initial delay */
-	dvb_ca_en50221_thread_update_delay(ca);
-
-	/* main loop */
-	while (!kthread_should_stop()) {
-		/* sleep for a bit */
-		if (!ca->wakeup) {
-			set_current_state(TASK_INTERRUPTIBLE);
-			schedule_timeout(ca->delay);
-			if (kthread_should_stop())
-				return 0;
-		}
-		ca->wakeup = 0;
-
-		/* go through all the slots processing them */
-		for (slot = 0; slot < ca->slot_count; slot++) {
-
-			mutex_lock(&ca->slot_info[slot].slot_lock);
-
-			// check the cam status + deal with CAMCHANGEs
-			while (dvb_ca_en50221_check_camstatus(ca, slot)) {
-				/* clear down an old CI slot if necessary */
-				if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE)
-					dvb_ca_en50221_slot_shutdown(ca, slot);
-
-				/* if a CAM is NOW present, initialise it */
-				if (ca->slot_info[slot].camchange_type == DVB_CA_EN50221_CAMCHANGE_INSERTED) {
-					ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_UNINITIALISED;
-				}
-
-				/* we've handled one CAMCHANGE */
-				dvb_ca_en50221_thread_update_delay(ca);
-				atomic_dec(&ca->slot_info[slot].camchange_count);
-			}
-
-			// CAM state machine
-			switch (ca->slot_info[slot].slot_state) {
-			case DVB_CA_SLOTSTATE_NONE:
-			case DVB_CA_SLOTSTATE_INVALID:
-				// no action needed
-				break;
-
-			case DVB_CA_SLOTSTATE_UNINITIALISED:
-				ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_WAITREADY;
-				ca->pub->slot_reset(ca->pub, slot);
-				ca->slot_info[slot].timeout = jiffies + (INIT_TIMEOUT_SECS * HZ);
-				break;
-
-			case DVB_CA_SLOTSTATE_WAITREADY:
-				if (time_after(jiffies, ca->slot_info[slot].timeout)) {
-					printk("dvb_ca adaptor %d: PC card did not respond :(\n",
-					       ca->dvbdev->adapter->num);
-					ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
-					dvb_ca_en50221_thread_update_delay(ca);
-					break;
-				}
-				// no other action needed; will automatically change state when ready
-				break;
-
-			case DVB_CA_SLOTSTATE_VALIDATE:
-				if (dvb_ca_en50221_parse_attributes(ca, slot) != 0) {
-					/* we need this extra check for annoying interfaces like the budget-av */
-					if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
-					    (ca->pub->poll_slot_status)) {
-						status = ca->pub->poll_slot_status(ca->pub, slot, 0);
-						if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) {
-							ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
-							dvb_ca_en50221_thread_update_delay(ca);
-							break;
-						}
-					}
-
-					printk("dvb_ca adapter %d: Invalid PC card inserted :(\n",
-					       ca->dvbdev->adapter->num);
-					ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
-					dvb_ca_en50221_thread_update_delay(ca);
-					break;
-				}
-				if (dvb_ca_en50221_set_configoption(ca, slot) != 0) {
-					printk("dvb_ca adapter %d: Unable to initialise CAM :(\n",
-					       ca->dvbdev->adapter->num);
-					ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
-					dvb_ca_en50221_thread_update_delay(ca);
-					break;
-				}
-				if (ca->pub->write_cam_control(ca->pub, slot,
-							       CTRLIF_COMMAND, CMDREG_RS) != 0) {
-					printk("dvb_ca adapter %d: Unable to reset CAM IF\n",
-					       ca->dvbdev->adapter->num);
-					ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
-					dvb_ca_en50221_thread_update_delay(ca);
-					break;
-				}
-				dprintk("DVB CAM validated successfully\n");
-
-				ca->slot_info[slot].timeout = jiffies + (INIT_TIMEOUT_SECS * HZ);
-				ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_WAITFR;
-				ca->wakeup = 1;
-				break;
-
-			case DVB_CA_SLOTSTATE_WAITFR:
-				if (time_after(jiffies, ca->slot_info[slot].timeout)) {
-					printk("dvb_ca adapter %d: DVB CAM did not respond :(\n",
-					       ca->dvbdev->adapter->num);
-					ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
-					dvb_ca_en50221_thread_update_delay(ca);
-					break;
-				}
-
-				flags = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS);
-				if (flags & STATUSREG_FR) {
-					ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
-					ca->wakeup = 1;
-				}
-				break;
-
-			case DVB_CA_SLOTSTATE_LINKINIT:
-				if (dvb_ca_en50221_link_init(ca, slot) != 0) {
-					/* we need this extra check for annoying interfaces like the budget-av */
-					if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
-					    (ca->pub->poll_slot_status)) {
-						status = ca->pub->poll_slot_status(ca->pub, slot, 0);
-						if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) {
-							ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
-							dvb_ca_en50221_thread_update_delay(ca);
-							break;
-						}
-					}
-
-					printk("dvb_ca adapter %d: DVB CAM link initialisation failed :(\n", ca->dvbdev->adapter->num);
-					ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
-					dvb_ca_en50221_thread_update_delay(ca);
-					break;
-				}
-
-				if (ca->slot_info[slot].rx_buffer.data == NULL) {
-					rxbuf = vmalloc(RX_BUFFER_SIZE);
-					if (rxbuf == NULL) {
-						printk("dvb_ca adapter %d: Unable to allocate CAM rx buffer :(\n", ca->dvbdev->adapter->num);
-						ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
-						dvb_ca_en50221_thread_update_delay(ca);
-						break;
-					}
-					dvb_ringbuffer_init(&ca->slot_info[slot].rx_buffer, rxbuf, RX_BUFFER_SIZE);
-				}
-
-				ca->pub->slot_ts_enable(ca->pub, slot);
-				ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_RUNNING;
-				dvb_ca_en50221_thread_update_delay(ca);
-				printk("dvb_ca adapter %d: DVB CAM detected and initialised successfully\n", ca->dvbdev->adapter->num);
-				break;
-
-			case DVB_CA_SLOTSTATE_RUNNING:
-				if (!ca->open)
-					break;
-
-				// poll slots for data
-				pktcount = 0;
-				while ((status = dvb_ca_en50221_read_data(ca, slot, NULL, 0)) > 0) {
-					if (!ca->open)
-						break;
-
-					/* if a CAMCHANGE occurred at some point, do not do any more processing of this slot */
-					if (dvb_ca_en50221_check_camstatus(ca, slot)) {
-						// we dont want to sleep on the next iteration so we can handle the cam change
-						ca->wakeup = 1;
-						break;
-					}
-
-					/* check if we've hit our limit this time */
-					if (++pktcount >= MAX_RX_PACKETS_PER_ITERATION) {
-						// dont sleep; there is likely to be more data to read
-						ca->wakeup = 1;
-						break;
-					}
-				}
-				break;
-			}
-
-			mutex_unlock(&ca->slot_info[slot].slot_lock);
-		}
-	}
-
-	return 0;
-}
-
-
-
-/* ******************************************************************************** */
-/* EN50221 IO interface functions */
-
-/**
- * Real ioctl implementation.
- * NOTE: CA_SEND_MSG/CA_GET_MSG ioctls have userspace buffers passed to them.
- *
- * @param inode Inode concerned.
- * @param file File concerned.
- * @param cmd IOCTL command.
- * @param arg Associated argument.
- *
- * @return 0 on success, <0 on error.
- */
-static int dvb_ca_en50221_io_do_ioctl(struct file *file,
-				      unsigned int cmd, void *parg)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dvb_ca_private *ca = dvbdev->priv;
-	int err = 0;
-	int slot;
-
-	dprintk("%s\n", __func__);
-
-	switch (cmd) {
-	case CA_RESET:
-		for (slot = 0; slot < ca->slot_count; slot++) {
-			mutex_lock(&ca->slot_info[slot].slot_lock);
-			if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE) {
-				dvb_ca_en50221_slot_shutdown(ca, slot);
-				if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)
-					dvb_ca_en50221_camchange_irq(ca->pub,
-								     slot,
-								     DVB_CA_EN50221_CAMCHANGE_INSERTED);
-			}
-			mutex_unlock(&ca->slot_info[slot].slot_lock);
-		}
-		ca->next_read_slot = 0;
-		dvb_ca_en50221_thread_wakeup(ca);
-		break;
-
-	case CA_GET_CAP: {
-		struct ca_caps *caps = parg;
-
-		caps->slot_num = ca->slot_count;
-		caps->slot_type = CA_CI_LINK;
-		caps->descr_num = 0;
-		caps->descr_type = 0;
-		break;
-	}
-
-	case CA_GET_SLOT_INFO: {
-		struct ca_slot_info *info = parg;
-
-		if ((info->num > ca->slot_count) || (info->num < 0))
-			return -EINVAL;
-
-		info->type = CA_CI_LINK;
-		info->flags = 0;
-		if ((ca->slot_info[info->num].slot_state != DVB_CA_SLOTSTATE_NONE)
-			&& (ca->slot_info[info->num].slot_state != DVB_CA_SLOTSTATE_INVALID)) {
-			info->flags = CA_CI_MODULE_PRESENT;
-		}
-		if (ca->slot_info[info->num].slot_state == DVB_CA_SLOTSTATE_RUNNING) {
-			info->flags |= CA_CI_MODULE_READY;
-		}
-		break;
-	}
-
-	default:
-		err = -EINVAL;
-		break;
-	}
-
-	return err;
-}
-
-
-/**
- * Wrapper for ioctl implementation.
- *
- * @param inode Inode concerned.
- * @param file File concerned.
- * @param cmd IOCTL command.
- * @param arg Associated argument.
- *
- * @return 0 on success, <0 on error.
- */
-static long dvb_ca_en50221_io_ioctl(struct file *file,
-				    unsigned int cmd, unsigned long arg)
-{
-	return dvb_usercopy(file, cmd, arg, dvb_ca_en50221_io_do_ioctl);
-}
-
-
-/**
- * Implementation of write() syscall.
- *
- * @param file File structure.
- * @param buf Source buffer.
- * @param count Size of source buffer.
- * @param ppos Position in file (ignored).
- *
- * @return Number of bytes read, or <0 on error.
- */
-static ssize_t dvb_ca_en50221_io_write(struct file *file,
-				       const char __user * buf, size_t count, loff_t * ppos)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dvb_ca_private *ca = dvbdev->priv;
-	u8 slot, connection_id;
-	int status;
-	u8 fragbuf[HOST_LINK_BUF_SIZE];
-	int fragpos = 0;
-	int fraglen;
-	unsigned long timeout;
-	int written;
-
-	dprintk("%s\n", __func__);
-
-	/* Incoming packet has a 2 byte header. hdr[0] = slot_id, hdr[1] = connection_id */
-	if (count < 2)
-		return -EINVAL;
-
-	/* extract slot & connection id */
-	if (copy_from_user(&slot, buf, 1))
-		return -EFAULT;
-	if (copy_from_user(&connection_id, buf + 1, 1))
-		return -EFAULT;
-	buf += 2;
-	count -= 2;
-
-	/* check if the slot is actually running */
-	if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_RUNNING)
-		return -EINVAL;
-
-	/* fragment the packets & store in the buffer */
-	while (fragpos < count) {
-		fraglen = ca->slot_info[slot].link_buf_size - 2;
-		if (fraglen < 0)
-			break;
-		if (fraglen > HOST_LINK_BUF_SIZE - 2)
-			fraglen = HOST_LINK_BUF_SIZE - 2;
-		if ((count - fragpos) < fraglen)
-			fraglen = count - fragpos;
-
-		fragbuf[0] = connection_id;
-		fragbuf[1] = ((fragpos + fraglen) < count) ? 0x80 : 0x00;
-		status = copy_from_user(fragbuf + 2, buf + fragpos, fraglen);
-		if (status) {
-			status = -EFAULT;
-			goto exit;
-		}
-
-		timeout = jiffies + HZ / 2;
-		written = 0;
-		while (!time_after(jiffies, timeout)) {
-			/* check the CAM hasn't been removed/reset in the meantime */
-			if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_RUNNING) {
-				status = -EIO;
-				goto exit;
-			}
-
-			mutex_lock(&ca->slot_info[slot].slot_lock);
-			status = dvb_ca_en50221_write_data(ca, slot, fragbuf, fraglen + 2);
-			mutex_unlock(&ca->slot_info[slot].slot_lock);
-			if (status == (fraglen + 2)) {
-				written = 1;
-				break;
-			}
-			if (status != -EAGAIN)
-				goto exit;
-
-			msleep(1);
-		}
-		if (!written) {
-			status = -EIO;
-			goto exit;
-		}
-
-		fragpos += fraglen;
-	}
-	status = count + 2;
-
-exit:
-	return status;
-}
-
-
-/**
- * Condition for waking up in dvb_ca_en50221_io_read_condition
- */
-static int dvb_ca_en50221_io_read_condition(struct dvb_ca_private *ca,
-					    int *result, int *_slot)
-{
-	int slot;
-	int slot_count = 0;
-	int idx;
-	size_t fraglen;
-	int connection_id = -1;
-	int found = 0;
-	u8 hdr[2];
-
-	slot = ca->next_read_slot;
-	while ((slot_count < ca->slot_count) && (!found)) {
-		if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_RUNNING)
-			goto nextslot;
-
-		if (ca->slot_info[slot].rx_buffer.data == NULL) {
-			return 0;
-		}
-
-		idx = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, -1, &fraglen);
-		while (idx != -1) {
-			dvb_ringbuffer_pkt_read(&ca->slot_info[slot].rx_buffer, idx, 0, hdr, 2);
-			if (connection_id == -1)
-				connection_id = hdr[0];
-			if ((hdr[0] == connection_id) && ((hdr[1] & 0x80) == 0)) {
-				*_slot = slot;
-				found = 1;
-				break;
-			}
-
-			idx = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, idx, &fraglen);
-		}
-
-nextslot:
-		slot = (slot + 1) % ca->slot_count;
-		slot_count++;
-	}
-
-	ca->next_read_slot = slot;
-	return found;
-}
-
-
-/**
- * Implementation of read() syscall.
- *
- * @param file File structure.
- * @param buf Destination buffer.
- * @param count Size of destination buffer.
- * @param ppos Position in file (ignored).
- *
- * @return Number of bytes read, or <0 on error.
- */
-static ssize_t dvb_ca_en50221_io_read(struct file *file, char __user * buf,
-				      size_t count, loff_t * ppos)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dvb_ca_private *ca = dvbdev->priv;
-	int status;
-	int result = 0;
-	u8 hdr[2];
-	int slot;
-	int connection_id = -1;
-	size_t idx, idx2;
-	int last_fragment = 0;
-	size_t fraglen;
-	int pktlen;
-	int dispose = 0;
-
-	dprintk("%s\n", __func__);
-
-	/* Outgoing packet has a 2 byte header. hdr[0] = slot_id, hdr[1] = connection_id */
-	if (count < 2)
-		return -EINVAL;
-
-	/* wait for some data */
-	if ((status = dvb_ca_en50221_io_read_condition(ca, &result, &slot)) == 0) {
-
-		/* if we're in nonblocking mode, exit immediately */
-		if (file->f_flags & O_NONBLOCK)
-			return -EWOULDBLOCK;
-
-		/* wait for some data */
-		status = wait_event_interruptible(ca->wait_queue,
-						  dvb_ca_en50221_io_read_condition
-						  (ca, &result, &slot));
-	}
-	if ((status < 0) || (result < 0)) {
-		if (result)
-			return result;
-		return status;
-	}
-
-	idx = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, -1, &fraglen);
-	pktlen = 2;
-	do {
-		if (idx == -1) {
-			printk("dvb_ca adapter %d: BUG: read packet ended before last_fragment encountered\n", ca->dvbdev->adapter->num);
-			status = -EIO;
-			goto exit;
-		}
-
-		dvb_ringbuffer_pkt_read(&ca->slot_info[slot].rx_buffer, idx, 0, hdr, 2);
-		if (connection_id == -1)
-			connection_id = hdr[0];
-		if (hdr[0] == connection_id) {
-			if (pktlen < count) {
-				if ((pktlen + fraglen - 2) > count) {
-					fraglen = count - pktlen;
-				} else {
-					fraglen -= 2;
-				}
-
-				if ((status = dvb_ringbuffer_pkt_read_user(&ca->slot_info[slot].rx_buffer, idx, 2,
-								      buf + pktlen, fraglen)) < 0) {
-					goto exit;
-				}
-				pktlen += fraglen;
-			}
-
-			if ((hdr[1] & 0x80) == 0)
-				last_fragment = 1;
-			dispose = 1;
-		}
-
-		idx2 = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, idx, &fraglen);
-		if (dispose)
-			dvb_ringbuffer_pkt_dispose(&ca->slot_info[slot].rx_buffer, idx);
-		idx = idx2;
-		dispose = 0;
-	} while (!last_fragment);
-
-	hdr[0] = slot;
-	hdr[1] = connection_id;
-	status = copy_to_user(buf, hdr, 2);
-	if (status) {
-		status = -EFAULT;
-		goto exit;
-	}
-	status = pktlen;
-
-exit:
-	return status;
-}
-
-
-/**
- * Implementation of file open syscall.
- *
- * @param inode Inode concerned.
- * @param file File concerned.
- *
- * @return 0 on success, <0 on failure.
- */
-static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dvb_ca_private *ca = dvbdev->priv;
-	int err;
-	int i;
-
-	dprintk("%s\n", __func__);
-
-	if (!try_module_get(ca->pub->owner))
-		return -EIO;
-
-	err = dvb_generic_open(inode, file);
-	if (err < 0) {
-		module_put(ca->pub->owner);
-		return err;
-	}
-
-	for (i = 0; i < ca->slot_count; i++) {
-
-		if (ca->slot_info[i].slot_state == DVB_CA_SLOTSTATE_RUNNING) {
-			if (ca->slot_info[i].rx_buffer.data != NULL) {
-				/* it is safe to call this here without locks because
-				 * ca->open == 0. Data is not read in this case */
-				dvb_ringbuffer_flush(&ca->slot_info[i].rx_buffer);
-			}
-		}
-	}
-
-	ca->open = 1;
-	dvb_ca_en50221_thread_update_delay(ca);
-	dvb_ca_en50221_thread_wakeup(ca);
-
-	return 0;
-}
-
-
-/**
- * Implementation of file close syscall.
- *
- * @param inode Inode concerned.
- * @param file File concerned.
- *
- * @return 0 on success, <0 on failure.
- */
-static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dvb_ca_private *ca = dvbdev->priv;
-	int err;
-
-	dprintk("%s\n", __func__);
-
-	/* mark the CA device as closed */
-	ca->open = 0;
-	dvb_ca_en50221_thread_update_delay(ca);
-
-	err = dvb_generic_release(inode, file);
-
-	module_put(ca->pub->owner);
-
-	return err;
-}
-
-
-/**
- * Implementation of poll() syscall.
- *
- * @param file File concerned.
- * @param wait poll wait table.
- *
- * @return Standard poll mask.
- */
-static unsigned int dvb_ca_en50221_io_poll(struct file *file, poll_table * wait)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dvb_ca_private *ca = dvbdev->priv;
-	unsigned int mask = 0;
-	int slot;
-	int result = 0;
-
-	dprintk("%s\n", __func__);
-
-	if (dvb_ca_en50221_io_read_condition(ca, &result, &slot) == 1) {
-		mask |= POLLIN;
-	}
-
-	/* if there is something, return now */
-	if (mask)
-		return mask;
-
-	/* wait for something to happen */
-	poll_wait(file, &ca->wait_queue, wait);
-
-	if (dvb_ca_en50221_io_read_condition(ca, &result, &slot) == 1) {
-		mask |= POLLIN;
-	}
-
-	return mask;
-}
-EXPORT_SYMBOL(dvb_ca_en50221_init);
-
-
-static const struct file_operations dvb_ca_fops = {
-	.owner = THIS_MODULE,
-	.read = dvb_ca_en50221_io_read,
-	.write = dvb_ca_en50221_io_write,
-	.unlocked_ioctl = dvb_ca_en50221_io_ioctl,
-	.open = dvb_ca_en50221_io_open,
-	.release = dvb_ca_en50221_io_release,
-	.poll = dvb_ca_en50221_io_poll,
-	.llseek = noop_llseek,
-};
-
-static struct dvb_device dvbdev_ca = {
-	.priv = NULL,
-	.users = 1,
-	.readers = 1,
-	.writers = 1,
-	.fops = &dvb_ca_fops,
-};
-
-
-/* ******************************************************************************** */
-/* Initialisation/shutdown functions */
-
-
-/**
- * Initialise a new DVB CA EN50221 interface device.
- *
- * @param dvb_adapter DVB adapter to attach the new CA device to.
- * @param ca The dvb_ca instance.
- * @param flags Flags describing the CA device (DVB_CA_FLAG_*).
- * @param slot_count Number of slots supported.
- *
- * @return 0 on success, nonzero on failure
- */
-int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter,
-			struct dvb_ca_en50221 *pubca, int flags, int slot_count)
-{
-	int ret;
-	struct dvb_ca_private *ca = NULL;
-	int i;
-
-	dprintk("%s\n", __func__);
-
-	if (slot_count < 1)
-		return -EINVAL;
-
-	/* initialise the system data */
-	if ((ca = kzalloc(sizeof(struct dvb_ca_private), GFP_KERNEL)) == NULL) {
-		ret = -ENOMEM;
-		goto error;
-	}
-	ca->pub = pubca;
-	ca->flags = flags;
-	ca->slot_count = slot_count;
-	if ((ca->slot_info = kcalloc(slot_count, sizeof(struct dvb_ca_slot), GFP_KERNEL)) == NULL) {
-		ret = -ENOMEM;
-		goto error;
-	}
-	init_waitqueue_head(&ca->wait_queue);
-	ca->open = 0;
-	ca->wakeup = 0;
-	ca->next_read_slot = 0;
-	pubca->private = ca;
-
-	/* register the DVB device */
-	ret = dvb_register_device(dvb_adapter, &ca->dvbdev, &dvbdev_ca, ca, DVB_DEVICE_CA);
-	if (ret)
-		goto error;
-
-	/* now initialise each slot */
-	for (i = 0; i < slot_count; i++) {
-		memset(&ca->slot_info[i], 0, sizeof(struct dvb_ca_slot));
-		ca->slot_info[i].slot_state = DVB_CA_SLOTSTATE_NONE;
-		atomic_set(&ca->slot_info[i].camchange_count, 0);
-		ca->slot_info[i].camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED;
-		mutex_init(&ca->slot_info[i].slot_lock);
-	}
-
-	if (signal_pending(current)) {
-		ret = -EINTR;
-		goto error;
-	}
-	mb();
-
-	/* create a kthread for monitoring this CA device */
-	ca->thread = kthread_run(dvb_ca_en50221_thread, ca, "kdvb-ca-%i:%i",
-				 ca->dvbdev->adapter->num, ca->dvbdev->id);
-	if (IS_ERR(ca->thread)) {
-		ret = PTR_ERR(ca->thread);
-		printk("dvb_ca_init: failed to start kernel_thread (%d)\n",
-			ret);
-		goto error;
-	}
-	return 0;
-
-error:
-	if (ca != NULL) {
-		if (ca->dvbdev != NULL)
-			dvb_unregister_device(ca->dvbdev);
-		kfree(ca->slot_info);
-		kfree(ca);
-	}
-	pubca->private = NULL;
-	return ret;
-}
-EXPORT_SYMBOL(dvb_ca_en50221_release);
-
-
-
-/**
- * Release a DVB CA EN50221 interface device.
- *
- * @param ca_dev The dvb_device_t instance for the CA device.
- * @param ca The associated dvb_ca instance.
- */
-void dvb_ca_en50221_release(struct dvb_ca_en50221 *pubca)
-{
-	struct dvb_ca_private *ca = pubca->private;
-	int i;
-
-	dprintk("%s\n", __func__);
-
-	/* shutdown the thread if there was one */
-	kthread_stop(ca->thread);
-
-	for (i = 0; i < ca->slot_count; i++) {
-		dvb_ca_en50221_slot_shutdown(ca, i);
-		vfree(ca->slot_info[i].rx_buffer.data);
-	}
-	kfree(ca->slot_info);
-	dvb_unregister_device(ca->dvbdev);
-	kfree(ca);
-	pubca->private = NULL;
-}
diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.h b/drivers/media/dvb/dvb-core/dvb_ca_en50221.h
deleted file mode 100644
index 7df2e14..0000000
--- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * dvb_ca.h: generic DVB functions for EN50221 CA interfaces
- *
- * Copyright (C) 2004 Andrew de Quincey
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef _DVB_CA_EN50221_H_
-#define _DVB_CA_EN50221_H_
-
-#include <linux/list.h>
-#include <linux/dvb/ca.h>
-
-#include "dvbdev.h"
-
-#define DVB_CA_EN50221_POLL_CAM_PRESENT	1
-#define DVB_CA_EN50221_POLL_CAM_CHANGED	2
-#define DVB_CA_EN50221_POLL_CAM_READY		4
-
-#define DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE	1
-#define DVB_CA_EN50221_FLAG_IRQ_FR		2
-#define DVB_CA_EN50221_FLAG_IRQ_DA		4
-
-#define DVB_CA_EN50221_CAMCHANGE_REMOVED		0
-#define DVB_CA_EN50221_CAMCHANGE_INSERTED		1
-
-
-
-/* Structure describing a CA interface */
-struct dvb_ca_en50221 {
-
-	/* the module owning this structure */
-	struct module* owner;
-
-	/* NOTE: the read_*, write_* and poll_slot_status functions will be
-	 * called for different slots concurrently and need to use locks where
-	 * and if appropriate. There will be no concurrent access to one slot.
-	 */
-
-	/* functions for accessing attribute memory on the CAM */
-	int (*read_attribute_mem)(struct dvb_ca_en50221* ca, int slot, int address);
-	int (*write_attribute_mem)(struct dvb_ca_en50221* ca, int slot, int address, u8 value);
-
-	/* functions for accessing the control interface on the CAM */
-	int (*read_cam_control)(struct dvb_ca_en50221* ca, int slot, u8 address);
-	int (*write_cam_control)(struct dvb_ca_en50221* ca, int slot, u8 address, u8 value);
-
-	/* Functions for controlling slots */
-	int (*slot_reset)(struct dvb_ca_en50221* ca, int slot);
-	int (*slot_shutdown)(struct dvb_ca_en50221* ca, int slot);
-	int (*slot_ts_enable)(struct dvb_ca_en50221* ca, int slot);
-
-	/*
-	* Poll slot status.
-	* Only necessary if DVB_CA_FLAG_EN50221_IRQ_CAMCHANGE is not set
-	*/
-	int (*poll_slot_status)(struct dvb_ca_en50221* ca, int slot, int open);
-
-	/* private data, used by caller */
-	void* data;
-
-	/* Opaque data used by the dvb_ca core. Do not modify! */
-	void* private;
-};
-
-
-
-
-/* ******************************************************************************** */
-/* Functions for reporting IRQ events */
-
-/**
- * A CAMCHANGE IRQ has occurred.
- *
- * @param ca CA instance.
- * @param slot Slot concerned.
- * @param change_type One of the DVB_CA_CAMCHANGE_* values
- */
-void dvb_ca_en50221_camchange_irq(struct dvb_ca_en50221* pubca, int slot, int change_type);
-
-/**
- * A CAMREADY IRQ has occurred.
- *
- * @param ca CA instance.
- * @param slot Slot concerned.
- */
-void dvb_ca_en50221_camready_irq(struct dvb_ca_en50221* pubca, int slot);
-
-/**
- * An FR or a DA IRQ has occurred.
- *
- * @param ca CA instance.
- * @param slot Slot concerned.
- */
-void dvb_ca_en50221_frda_irq(struct dvb_ca_en50221* ca, int slot);
-
-
-
-/* ******************************************************************************** */
-/* Initialisation/shutdown functions */
-
-/**
- * Initialise a new DVB CA device.
- *
- * @param dvb_adapter DVB adapter to attach the new CA device to.
- * @param ca The dvb_ca instance.
- * @param flags Flags describing the CA device (DVB_CA_EN50221_FLAG_*).
- * @param slot_count Number of slots supported.
- *
- * @return 0 on success, nonzero on failure
- */
-extern int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter, struct dvb_ca_en50221* ca, int flags, int slot_count);
-
-/**
- * Release a DVB CA device.
- *
- * @param ca The associated dvb_ca instance.
- */
-extern void dvb_ca_en50221_release(struct dvb_ca_en50221* ca);
-
-
-
-#endif
diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c
deleted file mode 100644
index d82469f..0000000
--- a/drivers/media/dvb/dvb-core/dvb_demux.c
+++ /dev/null
@@ -1,1309 +0,0 @@
-/*
- * dvb_demux.c - DVB kernel demux API
- *
- * Copyright (C) 2000-2001 Ralph  Metzler <ralph@convergence.de>
- *		       & Marcus Metzler <marcus@convergence.de>
- *			 for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/module.h>
-#include <linux/poll.h>
-#include <linux/string.h>
-#include <linux/crc32.h>
-#include <asm/uaccess.h>
-#include <asm/div64.h>
-
-#include "dvb_demux.h"
-
-#define NOBUFS
-/*
-** #define DVB_DEMUX_SECTION_LOSS_LOG to monitor payload loss in the syslog
-*/
-// #define DVB_DEMUX_SECTION_LOSS_LOG
-
-static int dvb_demux_tscheck;
-module_param(dvb_demux_tscheck, int, 0644);
-MODULE_PARM_DESC(dvb_demux_tscheck,
-		"enable transport stream continuity and TEI check");
-
-static int dvb_demux_speedcheck;
-module_param(dvb_demux_speedcheck, int, 0644);
-MODULE_PARM_DESC(dvb_demux_speedcheck,
-		"enable transport stream speed check");
-
-#define dprintk_tscheck(x...) do {                              \
-		if (dvb_demux_tscheck && printk_ratelimit())    \
-			printk(x);                              \
-	} while (0)
-
-/******************************************************************************
- * static inlined helper functions
- ******************************************************************************/
-
-static inline u16 section_length(const u8 *buf)
-{
-	return 3 + ((buf[1] & 0x0f) << 8) + buf[2];
-}
-
-static inline u16 ts_pid(const u8 *buf)
-{
-	return ((buf[1] & 0x1f) << 8) + buf[2];
-}
-
-static inline u8 payload(const u8 *tsp)
-{
-	if (!(tsp[3] & 0x10))	// no payload?
-		return 0;
-
-	if (tsp[3] & 0x20) {	// adaptation field?
-		if (tsp[4] > 183)	// corrupted data?
-			return 0;
-		else
-			return 184 - 1 - tsp[4];
-	}
-
-	return 184;
-}
-
-static u32 dvb_dmx_crc32(struct dvb_demux_feed *f, const u8 *src, size_t len)
-{
-	return (f->feed.sec.crc_val = crc32_be(f->feed.sec.crc_val, src, len));
-}
-
-static void dvb_dmx_memcopy(struct dvb_demux_feed *f, u8 *d, const u8 *s,
-			    size_t len)
-{
-	memcpy(d, s, len);
-}
-
-/******************************************************************************
- * Software filter functions
- ******************************************************************************/
-
-static inline int dvb_dmx_swfilter_payload(struct dvb_demux_feed *feed,
-					   const u8 *buf)
-{
-	int count = payload(buf);
-	int p;
-	//int ccok;
-	//u8 cc;
-
-	if (count == 0)
-		return -1;
-
-	p = 188 - count;
-
-	/*
-	cc = buf[3] & 0x0f;
-	ccok = ((feed->cc + 1) & 0x0f) == cc;
-	feed->cc = cc;
-	if (!ccok)
-		printk("missed packet!\n");
-	*/
-
-	if (buf[1] & 0x40)	// PUSI ?
-		feed->peslen = 0xfffa;
-
-	feed->peslen += count;
-
-	return feed->cb.ts(&buf[p], count, NULL, 0, &feed->feed.ts, DMX_OK);
-}
-
-static int dvb_dmx_swfilter_sectionfilter(struct dvb_demux_feed *feed,
-					  struct dvb_demux_filter *f)
-{
-	u8 neq = 0;
-	int i;
-
-	for (i = 0; i < DVB_DEMUX_MASK_MAX; i++) {
-		u8 xor = f->filter.filter_value[i] ^ feed->feed.sec.secbuf[i];
-
-		if (f->maskandmode[i] & xor)
-			return 0;
-
-		neq |= f->maskandnotmode[i] & xor;
-	}
-
-	if (f->doneq && !neq)
-		return 0;
-
-	return feed->cb.sec(feed->feed.sec.secbuf, feed->feed.sec.seclen,
-			    NULL, 0, &f->filter, DMX_OK);
-}
-
-static inline int dvb_dmx_swfilter_section_feed(struct dvb_demux_feed *feed)
-{
-	struct dvb_demux *demux = feed->demux;
-	struct dvb_demux_filter *f = feed->filter;
-	struct dmx_section_feed *sec = &feed->feed.sec;
-	int section_syntax_indicator;
-
-	if (!sec->is_filtering)
-		return 0;
-
-	if (!f)
-		return 0;
-
-	if (sec->check_crc) {
-		section_syntax_indicator = ((sec->secbuf[1] & 0x80) != 0);
-		if (section_syntax_indicator &&
-		    demux->check_crc32(feed, sec->secbuf, sec->seclen))
-			return -1;
-	}
-
-	do {
-		if (dvb_dmx_swfilter_sectionfilter(feed, f) < 0)
-			return -1;
-	} while ((f = f->next) && sec->is_filtering);
-
-	sec->seclen = 0;
-
-	return 0;
-}
-
-static void dvb_dmx_swfilter_section_new(struct dvb_demux_feed *feed)
-{
-	struct dmx_section_feed *sec = &feed->feed.sec;
-
-#ifdef DVB_DEMUX_SECTION_LOSS_LOG
-	if (sec->secbufp < sec->tsfeedp) {
-		int i, n = sec->tsfeedp - sec->secbufp;
-
-		/*
-		 * Section padding is done with 0xff bytes entirely.
-		 * Due to speed reasons, we won't check all of them
-		 * but just first and last.
-		 */
-		if (sec->secbuf[0] != 0xff || sec->secbuf[n - 1] != 0xff) {
-			printk("dvb_demux.c section ts padding loss: %d/%d\n",
-			       n, sec->tsfeedp);
-			printk("dvb_demux.c pad data:");
-			for (i = 0; i < n; i++)
-				printk(" %02x", sec->secbuf[i]);
-			printk("\n");
-		}
-	}
-#endif
-
-	sec->tsfeedp = sec->secbufp = sec->seclen = 0;
-	sec->secbuf = sec->secbuf_base;
-}
-
-/*
- * Losless Section Demux 1.4.1 by Emard
- * Valsecchi Patrick:
- *  - middle of section A  (no PUSI)
- *  - end of section A and start of section B
- *    (with PUSI pointing to the start of the second section)
- *
- *  In this case, without feed->pusi_seen you'll receive a garbage section
- *  consisting of the end of section A. Basically because tsfeedp
- *  is incemented and the use=0 condition is not raised
- *  when the second packet arrives.
- *
- * Fix:
- * when demux is started, let feed->pusi_seen = 0 to
- * prevent initial feeding of garbage from the end of
- * previous section. When you for the first time see PUSI=1
- * then set feed->pusi_seen = 1
- */
-static int dvb_dmx_swfilter_section_copy_dump(struct dvb_demux_feed *feed,
-					      const u8 *buf, u8 len)
-{
-	struct dvb_demux *demux = feed->demux;
-	struct dmx_section_feed *sec = &feed->feed.sec;
-	u16 limit, seclen, n;
-
-	if (sec->tsfeedp >= DMX_MAX_SECFEED_SIZE)
-		return 0;
-
-	if (sec->tsfeedp + len > DMX_MAX_SECFEED_SIZE) {
-#ifdef DVB_DEMUX_SECTION_LOSS_LOG
-		printk("dvb_demux.c section buffer full loss: %d/%d\n",
-		       sec->tsfeedp + len - DMX_MAX_SECFEED_SIZE,
-		       DMX_MAX_SECFEED_SIZE);
-#endif
-		len = DMX_MAX_SECFEED_SIZE - sec->tsfeedp;
-	}
-
-	if (len <= 0)
-		return 0;
-
-	demux->memcopy(feed, sec->secbuf_base + sec->tsfeedp, buf, len);
-	sec->tsfeedp += len;
-
-	/*
-	 * Dump all the sections we can find in the data (Emard)
-	 */
-	limit = sec->tsfeedp;
-	if (limit > DMX_MAX_SECFEED_SIZE)
-		return -1;	/* internal error should never happen */
-
-	/* to be sure always set secbuf */
-	sec->secbuf = sec->secbuf_base + sec->secbufp;
-
-	for (n = 0; sec->secbufp + 2 < limit; n++) {
-		seclen = section_length(sec->secbuf);
-		if (seclen <= 0 || seclen > DMX_MAX_SECTION_SIZE
-		    || seclen + sec->secbufp > limit)
-			return 0;
-		sec->seclen = seclen;
-		sec->crc_val = ~0;
-		/* dump [secbuf .. secbuf+seclen) */
-		if (feed->pusi_seen)
-			dvb_dmx_swfilter_section_feed(feed);
-#ifdef DVB_DEMUX_SECTION_LOSS_LOG
-		else
-			printk("dvb_demux.c pusi not seen, discarding section data\n");
-#endif
-		sec->secbufp += seclen;	/* secbufp and secbuf moving together is */
-		sec->secbuf += seclen;	/* redundant but saves pointer arithmetic */
-	}
-
-	return 0;
-}
-
-static int dvb_dmx_swfilter_section_packet(struct dvb_demux_feed *feed,
-					   const u8 *buf)
-{
-	u8 p, count;
-	int ccok, dc_i = 0;
-	u8 cc;
-
-	count = payload(buf);
-
-	if (count == 0)		/* count == 0 if no payload or out of range */
-		return -1;
-
-	p = 188 - count;	/* payload start */
-
-	cc = buf[3] & 0x0f;
-	ccok = ((feed->cc + 1) & 0x0f) == cc;
-	feed->cc = cc;
-
-	if (buf[3] & 0x20) {
-		/* adaption field present, check for discontinuity_indicator */
-		if ((buf[4] > 0) && (buf[5] & 0x80))
-			dc_i = 1;
-	}
-
-	if (!ccok || dc_i) {
-#ifdef DVB_DEMUX_SECTION_LOSS_LOG
-		printk("dvb_demux.c discontinuity detected %d bytes lost\n",
-		       count);
-		/*
-		 * those bytes under sume circumstances will again be reported
-		 * in the following dvb_dmx_swfilter_section_new
-		 */
-#endif
-		/*
-		 * Discontinuity detected. Reset pusi_seen = 0 to
-		 * stop feeding of suspicious data until next PUSI=1 arrives
-		 */
-		feed->pusi_seen = 0;
-		dvb_dmx_swfilter_section_new(feed);
-	}
-
-	if (buf[1] & 0x40) {
-		/* PUSI=1 (is set), section boundary is here */
-		if (count > 1 && buf[p] < count) {
-			const u8 *before = &buf[p + 1];
-			u8 before_len = buf[p];
-			const u8 *after = &before[before_len];
-			u8 after_len = count - 1 - before_len;
-
-			dvb_dmx_swfilter_section_copy_dump(feed, before,
-							   before_len);
-			/* before start of new section, set pusi_seen = 1 */
-			feed->pusi_seen = 1;
-			dvb_dmx_swfilter_section_new(feed);
-			dvb_dmx_swfilter_section_copy_dump(feed, after,
-							   after_len);
-		}
-#ifdef DVB_DEMUX_SECTION_LOSS_LOG
-		else if (count > 0)
-			printk("dvb_demux.c PUSI=1 but %d bytes lost\n", count);
-#endif
-	} else {
-		/* PUSI=0 (is not set), no section boundary */
-		dvb_dmx_swfilter_section_copy_dump(feed, &buf[p], count);
-	}
-
-	return 0;
-}
-
-static inline void dvb_dmx_swfilter_packet_type(struct dvb_demux_feed *feed,
-						const u8 *buf)
-{
-	switch (feed->type) {
-	case DMX_TYPE_TS:
-		if (!feed->feed.ts.is_filtering)
-			break;
-		if (feed->ts_type & TS_PACKET) {
-			if (feed->ts_type & TS_PAYLOAD_ONLY)
-				dvb_dmx_swfilter_payload(feed, buf);
-			else
-				feed->cb.ts(buf, 188, NULL, 0, &feed->feed.ts,
-					    DMX_OK);
-		}
-		if (feed->ts_type & TS_DECODER)
-			if (feed->demux->write_to_decoder)
-				feed->demux->write_to_decoder(feed, buf, 188);
-		break;
-
-	case DMX_TYPE_SEC:
-		if (!feed->feed.sec.is_filtering)
-			break;
-		if (dvb_dmx_swfilter_section_packet(feed, buf) < 0)
-			feed->feed.sec.seclen = feed->feed.sec.secbufp = 0;
-		break;
-
-	default:
-		break;
-	}
-}
-
-#define DVR_FEED(f)							\
-	(((f)->type == DMX_TYPE_TS) &&					\
-	((f)->feed.ts.is_filtering) &&					\
-	(((f)->ts_type & (TS_PACKET | TS_DEMUX)) == TS_PACKET))
-
-static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf)
-{
-	struct dvb_demux_feed *feed;
-	u16 pid = ts_pid(buf);
-	int dvr_done = 0;
-
-	if (dvb_demux_speedcheck) {
-		struct timespec cur_time, delta_time;
-		u64 speed_bytes, speed_timedelta;
-
-		demux->speed_pkts_cnt++;
-
-		/* show speed every SPEED_PKTS_INTERVAL packets */
-		if (!(demux->speed_pkts_cnt % SPEED_PKTS_INTERVAL)) {
-			cur_time = current_kernel_time();
-
-			if (demux->speed_last_time.tv_sec != 0 &&
-					demux->speed_last_time.tv_nsec != 0) {
-				delta_time = timespec_sub(cur_time,
-						demux->speed_last_time);
-				speed_bytes = (u64)demux->speed_pkts_cnt
-					* 188 * 8;
-				/* convert to 1024 basis */
-				speed_bytes = 1000 * div64_u64(speed_bytes,
-						1024);
-				speed_timedelta =
-					(u64)timespec_to_ns(&delta_time);
-				speed_timedelta = div64_u64(speed_timedelta,
-						1000000); /* nsec -> usec */
-				printk(KERN_INFO "TS speed %llu Kbits/sec \n",
-						div64_u64(speed_bytes,
-							speed_timedelta));
-			};
-
-			demux->speed_last_time = cur_time;
-			demux->speed_pkts_cnt = 0;
-		};
-	};
-
-	if (demux->cnt_storage && dvb_demux_tscheck) {
-		/* check pkt counter */
-		if (pid < MAX_PID) {
-			if (buf[1] & 0x80)
-				dprintk_tscheck("TEI detected. "
-						"PID=0x%x data1=0x%x\n",
-						pid, buf[1]);
-
-			if ((buf[3] & 0xf) != demux->cnt_storage[pid])
-				dprintk_tscheck("TS packet counter mismatch. "
-						"PID=0x%x expected 0x%x "
-						"got 0x%x\n",
-						pid, demux->cnt_storage[pid],
-						buf[3] & 0xf);
-
-			demux->cnt_storage[pid] = ((buf[3] & 0xf) + 1)&0xf;
-		};
-		/* end check */
-	};
-
-	list_for_each_entry(feed, &demux->feed_list, list_head) {
-		if ((feed->pid != pid) && (feed->pid != 0x2000))
-			continue;
-
-		/* copy each packet only once to the dvr device, even
-		 * if a PID is in multiple filters (e.g. video + PCR) */
-		if ((DVR_FEED(feed)) && (dvr_done++))
-			continue;
-
-		if (feed->pid == pid)
-			dvb_dmx_swfilter_packet_type(feed, buf);
-		else if (feed->pid == 0x2000)
-			feed->cb.ts(buf, 188, NULL, 0, &feed->feed.ts, DMX_OK);
-	}
-}
-
-void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf,
-			      size_t count)
-{
-	spin_lock(&demux->lock);
-
-	while (count--) {
-		if (buf[0] == 0x47)
-			dvb_dmx_swfilter_packet(demux, buf);
-		buf += 188;
-	}
-
-	spin_unlock(&demux->lock);
-}
-
-EXPORT_SYMBOL(dvb_dmx_swfilter_packets);
-
-static inline int find_next_packet(const u8 *buf, int pos, size_t count,
-				   const int pktsize)
-{
-	int start = pos, lost;
-
-	while (pos < count) {
-		if (buf[pos] == 0x47 ||
-		    (pktsize == 204 && buf[pos] == 0xB8))
-			break;
-		pos++;
-	}
-
-	lost = pos - start;
-	if (lost) {
-		/* This garbage is part of a valid packet? */
-		int backtrack = pos - pktsize;
-		if (backtrack >= 0 && (buf[backtrack] == 0x47 ||
-		    (pktsize == 204 && buf[backtrack] == 0xB8)))
-			return backtrack;
-	}
-
-	return pos;
-}
-
-/* Filter all pktsize= 188 or 204 sized packets and skip garbage. */
-static inline void _dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf,
-		size_t count, const int pktsize)
-{
-	int p = 0, i, j;
-	const u8 *q;
-
-	spin_lock(&demux->lock);
-
-	if (demux->tsbufp) { /* tsbuf[0] is now 0x47. */
-		i = demux->tsbufp;
-		j = pktsize - i;
-		if (count < j) {
-			memcpy(&demux->tsbuf[i], buf, count);
-			demux->tsbufp += count;
-			goto bailout;
-		}
-		memcpy(&demux->tsbuf[i], buf, j);
-		if (demux->tsbuf[0] == 0x47) /* double check */
-			dvb_dmx_swfilter_packet(demux, demux->tsbuf);
-		demux->tsbufp = 0;
-		p += j;
-	}
-
-	while (1) {
-		p = find_next_packet(buf, p, count, pktsize);
-		if (p >= count)
-			break;
-		if (count - p < pktsize)
-			break;
-
-		q = &buf[p];
-
-		if (pktsize == 204 && (*q == 0xB8)) {
-			memcpy(demux->tsbuf, q, 188);
-			demux->tsbuf[0] = 0x47;
-			q = demux->tsbuf;
-		}
-		dvb_dmx_swfilter_packet(demux, q);
-		p += pktsize;
-	}
-
-	i = count - p;
-	if (i) {
-		memcpy(demux->tsbuf, &buf[p], i);
-		demux->tsbufp = i;
-		if (pktsize == 204 && demux->tsbuf[0] == 0xB8)
-			demux->tsbuf[0] = 0x47;
-	}
-
-bailout:
-	spin_unlock(&demux->lock);
-}
-
-void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count)
-{
-	_dvb_dmx_swfilter(demux, buf, count, 188);
-}
-EXPORT_SYMBOL(dvb_dmx_swfilter);
-
-void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count)
-{
-	_dvb_dmx_swfilter(demux, buf, count, 204);
-}
-EXPORT_SYMBOL(dvb_dmx_swfilter_204);
-
-void dvb_dmx_swfilter_raw(struct dvb_demux *demux, const u8 *buf, size_t count)
-{
-	spin_lock(&demux->lock);
-
-	demux->feed->cb.ts(buf, count, NULL, 0, &demux->feed->feed.ts, DMX_OK);
-
-	spin_unlock(&demux->lock);
-}
-EXPORT_SYMBOL(dvb_dmx_swfilter_raw);
-
-static struct dvb_demux_filter *dvb_dmx_filter_alloc(struct dvb_demux *demux)
-{
-	int i;
-
-	for (i = 0; i < demux->filternum; i++)
-		if (demux->filter[i].state == DMX_STATE_FREE)
-			break;
-
-	if (i == demux->filternum)
-		return NULL;
-
-	demux->filter[i].state = DMX_STATE_ALLOCATED;
-
-	return &demux->filter[i];
-}
-
-static struct dvb_demux_feed *dvb_dmx_feed_alloc(struct dvb_demux *demux)
-{
-	int i;
-
-	for (i = 0; i < demux->feednum; i++)
-		if (demux->feed[i].state == DMX_STATE_FREE)
-			break;
-
-	if (i == demux->feednum)
-		return NULL;
-
-	demux->feed[i].state = DMX_STATE_ALLOCATED;
-
-	return &demux->feed[i];
-}
-
-static int dvb_demux_feed_find(struct dvb_demux_feed *feed)
-{
-	struct dvb_demux_feed *entry;
-
-	list_for_each_entry(entry, &feed->demux->feed_list, list_head)
-		if (entry == feed)
-			return 1;
-
-	return 0;
-}
-
-static void dvb_demux_feed_add(struct dvb_demux_feed *feed)
-{
-	spin_lock_irq(&feed->demux->lock);
-	if (dvb_demux_feed_find(feed)) {
-		printk(KERN_ERR "%s: feed already in list (type=%x state=%x pid=%x)\n",
-		       __func__, feed->type, feed->state, feed->pid);
-		goto out;
-	}
-
-	list_add(&feed->list_head, &feed->demux->feed_list);
-out:
-	spin_unlock_irq(&feed->demux->lock);
-}
-
-static void dvb_demux_feed_del(struct dvb_demux_feed *feed)
-{
-	spin_lock_irq(&feed->demux->lock);
-	if (!(dvb_demux_feed_find(feed))) {
-		printk(KERN_ERR "%s: feed not in list (type=%x state=%x pid=%x)\n",
-		       __func__, feed->type, feed->state, feed->pid);
-		goto out;
-	}
-
-	list_del(&feed->list_head);
-out:
-	spin_unlock_irq(&feed->demux->lock);
-}
-
-static int dmx_ts_feed_set(struct dmx_ts_feed *ts_feed, u16 pid, int ts_type,
-			   enum dmx_ts_pes pes_type,
-			   size_t circular_buffer_size, struct timespec timeout)
-{
-	struct dvb_demux_feed *feed = (struct dvb_demux_feed *)ts_feed;
-	struct dvb_demux *demux = feed->demux;
-
-	if (pid > DMX_MAX_PID)
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&demux->mutex))
-		return -ERESTARTSYS;
-
-	if (ts_type & TS_DECODER) {
-		if (pes_type >= DMX_TS_PES_OTHER) {
-			mutex_unlock(&demux->mutex);
-			return -EINVAL;
-		}
-
-		if (demux->pesfilter[pes_type] &&
-		    demux->pesfilter[pes_type] != feed) {
-			mutex_unlock(&demux->mutex);
-			return -EINVAL;
-		}
-
-		demux->pesfilter[pes_type] = feed;
-		demux->pids[pes_type] = pid;
-	}
-
-	dvb_demux_feed_add(feed);
-
-	feed->pid = pid;
-	feed->buffer_size = circular_buffer_size;
-	feed->timeout = timeout;
-	feed->ts_type = ts_type;
-	feed->pes_type = pes_type;
-
-	if (feed->buffer_size) {
-#ifdef NOBUFS
-		feed->buffer = NULL;
-#else
-		feed->buffer = vmalloc(feed->buffer_size);
-		if (!feed->buffer) {
-			mutex_unlock(&demux->mutex);
-			return -ENOMEM;
-		}
-#endif
-	}
-
-	feed->state = DMX_STATE_READY;
-	mutex_unlock(&demux->mutex);
-
-	return 0;
-}
-
-static int dmx_ts_feed_start_filtering(struct dmx_ts_feed *ts_feed)
-{
-	struct dvb_demux_feed *feed = (struct dvb_demux_feed *)ts_feed;
-	struct dvb_demux *demux = feed->demux;
-	int ret;
-
-	if (mutex_lock_interruptible(&demux->mutex))
-		return -ERESTARTSYS;
-
-	if (feed->state != DMX_STATE_READY || feed->type != DMX_TYPE_TS) {
-		mutex_unlock(&demux->mutex);
-		return -EINVAL;
-	}
-
-	if (!demux->start_feed) {
-		mutex_unlock(&demux->mutex);
-		return -ENODEV;
-	}
-
-	if ((ret = demux->start_feed(feed)) < 0) {
-		mutex_unlock(&demux->mutex);
-		return ret;
-	}
-
-	spin_lock_irq(&demux->lock);
-	ts_feed->is_filtering = 1;
-	feed->state = DMX_STATE_GO;
-	spin_unlock_irq(&demux->lock);
-	mutex_unlock(&demux->mutex);
-
-	return 0;
-}
-
-static int dmx_ts_feed_stop_filtering(struct dmx_ts_feed *ts_feed)
-{
-	struct dvb_demux_feed *feed = (struct dvb_demux_feed *)ts_feed;
-	struct dvb_demux *demux = feed->demux;
-	int ret;
-
-	mutex_lock(&demux->mutex);
-
-	if (feed->state < DMX_STATE_GO) {
-		mutex_unlock(&demux->mutex);
-		return -EINVAL;
-	}
-
-	if (!demux->stop_feed) {
-		mutex_unlock(&demux->mutex);
-		return -ENODEV;
-	}
-
-	ret = demux->stop_feed(feed);
-
-	spin_lock_irq(&demux->lock);
-	ts_feed->is_filtering = 0;
-	feed->state = DMX_STATE_ALLOCATED;
-	spin_unlock_irq(&demux->lock);
-	mutex_unlock(&demux->mutex);
-
-	return ret;
-}
-
-static int dvbdmx_allocate_ts_feed(struct dmx_demux *dmx,
-				   struct dmx_ts_feed **ts_feed,
-				   dmx_ts_cb callback)
-{
-	struct dvb_demux *demux = (struct dvb_demux *)dmx;
-	struct dvb_demux_feed *feed;
-
-	if (mutex_lock_interruptible(&demux->mutex))
-		return -ERESTARTSYS;
-
-	if (!(feed = dvb_dmx_feed_alloc(demux))) {
-		mutex_unlock(&demux->mutex);
-		return -EBUSY;
-	}
-
-	feed->type = DMX_TYPE_TS;
-	feed->cb.ts = callback;
-	feed->demux = demux;
-	feed->pid = 0xffff;
-	feed->peslen = 0xfffa;
-	feed->buffer = NULL;
-
-	(*ts_feed) = &feed->feed.ts;
-	(*ts_feed)->parent = dmx;
-	(*ts_feed)->priv = NULL;
-	(*ts_feed)->is_filtering = 0;
-	(*ts_feed)->start_filtering = dmx_ts_feed_start_filtering;
-	(*ts_feed)->stop_filtering = dmx_ts_feed_stop_filtering;
-	(*ts_feed)->set = dmx_ts_feed_set;
-
-	if (!(feed->filter = dvb_dmx_filter_alloc(demux))) {
-		feed->state = DMX_STATE_FREE;
-		mutex_unlock(&demux->mutex);
-		return -EBUSY;
-	}
-
-	feed->filter->type = DMX_TYPE_TS;
-	feed->filter->feed = feed;
-	feed->filter->state = DMX_STATE_READY;
-
-	mutex_unlock(&demux->mutex);
-
-	return 0;
-}
-
-static int dvbdmx_release_ts_feed(struct dmx_demux *dmx,
-				  struct dmx_ts_feed *ts_feed)
-{
-	struct dvb_demux *demux = (struct dvb_demux *)dmx;
-	struct dvb_demux_feed *feed = (struct dvb_demux_feed *)ts_feed;
-
-	mutex_lock(&demux->mutex);
-
-	if (feed->state == DMX_STATE_FREE) {
-		mutex_unlock(&demux->mutex);
-		return -EINVAL;
-	}
-#ifndef NOBUFS
-	vfree(feed->buffer);
-	feed->buffer = NULL;
-#endif
-
-	feed->state = DMX_STATE_FREE;
-	feed->filter->state = DMX_STATE_FREE;
-
-	dvb_demux_feed_del(feed);
-
-	feed->pid = 0xffff;
-
-	if (feed->ts_type & TS_DECODER && feed->pes_type < DMX_TS_PES_OTHER)
-		demux->pesfilter[feed->pes_type] = NULL;
-
-	mutex_unlock(&demux->mutex);
-	return 0;
-}
-
-/******************************************************************************
- * dmx_section_feed API calls
- ******************************************************************************/
-
-static int dmx_section_feed_allocate_filter(struct dmx_section_feed *feed,
-					    struct dmx_section_filter **filter)
-{
-	struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *)feed;
-	struct dvb_demux *dvbdemux = dvbdmxfeed->demux;
-	struct dvb_demux_filter *dvbdmxfilter;
-
-	if (mutex_lock_interruptible(&dvbdemux->mutex))
-		return -ERESTARTSYS;
-
-	dvbdmxfilter = dvb_dmx_filter_alloc(dvbdemux);
-	if (!dvbdmxfilter) {
-		mutex_unlock(&dvbdemux->mutex);
-		return -EBUSY;
-	}
-
-	spin_lock_irq(&dvbdemux->lock);
-	*filter = &dvbdmxfilter->filter;
-	(*filter)->parent = feed;
-	(*filter)->priv = NULL;
-	dvbdmxfilter->feed = dvbdmxfeed;
-	dvbdmxfilter->type = DMX_TYPE_SEC;
-	dvbdmxfilter->state = DMX_STATE_READY;
-	dvbdmxfilter->next = dvbdmxfeed->filter;
-	dvbdmxfeed->filter = dvbdmxfilter;
-	spin_unlock_irq(&dvbdemux->lock);
-
-	mutex_unlock(&dvbdemux->mutex);
-	return 0;
-}
-
-static int dmx_section_feed_set(struct dmx_section_feed *feed,
-				u16 pid, size_t circular_buffer_size,
-				int check_crc)
-{
-	struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *)feed;
-	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
-
-	if (pid > 0x1fff)
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&dvbdmx->mutex))
-		return -ERESTARTSYS;
-
-	dvb_demux_feed_add(dvbdmxfeed);
-
-	dvbdmxfeed->pid = pid;
-	dvbdmxfeed->buffer_size = circular_buffer_size;
-	dvbdmxfeed->feed.sec.check_crc = check_crc;
-
-#ifdef NOBUFS
-	dvbdmxfeed->buffer = NULL;
-#else
-	dvbdmxfeed->buffer = vmalloc(dvbdmxfeed->buffer_size);
-	if (!dvbdmxfeed->buffer) {
-		mutex_unlock(&dvbdmx->mutex);
-		return -ENOMEM;
-	}
-#endif
-
-	dvbdmxfeed->state = DMX_STATE_READY;
-	mutex_unlock(&dvbdmx->mutex);
-	return 0;
-}
-
-static void prepare_secfilters(struct dvb_demux_feed *dvbdmxfeed)
-{
-	int i;
-	struct dvb_demux_filter *f;
-	struct dmx_section_filter *sf;
-	u8 mask, mode, doneq;
-
-	if (!(f = dvbdmxfeed->filter))
-		return;
-	do {
-		sf = &f->filter;
-		doneq = 0;
-		for (i = 0; i < DVB_DEMUX_MASK_MAX; i++) {
-			mode = sf->filter_mode[i];
-			mask = sf->filter_mask[i];
-			f->maskandmode[i] = mask & mode;
-			doneq |= f->maskandnotmode[i] = mask & ~mode;
-		}
-		f->doneq = doneq ? 1 : 0;
-	} while ((f = f->next));
-}
-
-static int dmx_section_feed_start_filtering(struct dmx_section_feed *feed)
-{
-	struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *)feed;
-	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
-	int ret;
-
-	if (mutex_lock_interruptible(&dvbdmx->mutex))
-		return -ERESTARTSYS;
-
-	if (feed->is_filtering) {
-		mutex_unlock(&dvbdmx->mutex);
-		return -EBUSY;
-	}
-
-	if (!dvbdmxfeed->filter) {
-		mutex_unlock(&dvbdmx->mutex);
-		return -EINVAL;
-	}
-
-	dvbdmxfeed->feed.sec.tsfeedp = 0;
-	dvbdmxfeed->feed.sec.secbuf = dvbdmxfeed->feed.sec.secbuf_base;
-	dvbdmxfeed->feed.sec.secbufp = 0;
-	dvbdmxfeed->feed.sec.seclen = 0;
-
-	if (!dvbdmx->start_feed) {
-		mutex_unlock(&dvbdmx->mutex);
-		return -ENODEV;
-	}
-
-	prepare_secfilters(dvbdmxfeed);
-
-	if ((ret = dvbdmx->start_feed(dvbdmxfeed)) < 0) {
-		mutex_unlock(&dvbdmx->mutex);
-		return ret;
-	}
-
-	spin_lock_irq(&dvbdmx->lock);
-	feed->is_filtering = 1;
-	dvbdmxfeed->state = DMX_STATE_GO;
-	spin_unlock_irq(&dvbdmx->lock);
-
-	mutex_unlock(&dvbdmx->mutex);
-	return 0;
-}
-
-static int dmx_section_feed_stop_filtering(struct dmx_section_feed *feed)
-{
-	struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *)feed;
-	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
-	int ret;
-
-	mutex_lock(&dvbdmx->mutex);
-
-	if (!dvbdmx->stop_feed) {
-		mutex_unlock(&dvbdmx->mutex);
-		return -ENODEV;
-	}
-
-	ret = dvbdmx->stop_feed(dvbdmxfeed);
-
-	spin_lock_irq(&dvbdmx->lock);
-	dvbdmxfeed->state = DMX_STATE_READY;
-	feed->is_filtering = 0;
-	spin_unlock_irq(&dvbdmx->lock);
-
-	mutex_unlock(&dvbdmx->mutex);
-	return ret;
-}
-
-static int dmx_section_feed_release_filter(struct dmx_section_feed *feed,
-					   struct dmx_section_filter *filter)
-{
-	struct dvb_demux_filter *dvbdmxfilter = (struct dvb_demux_filter *)filter, *f;
-	struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *)feed;
-	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
-
-	mutex_lock(&dvbdmx->mutex);
-
-	if (dvbdmxfilter->feed != dvbdmxfeed) {
-		mutex_unlock(&dvbdmx->mutex);
-		return -EINVAL;
-	}
-
-	if (feed->is_filtering)
-		feed->stop_filtering(feed);
-
-	spin_lock_irq(&dvbdmx->lock);
-	f = dvbdmxfeed->filter;
-
-	if (f == dvbdmxfilter) {
-		dvbdmxfeed->filter = dvbdmxfilter->next;
-	} else {
-		while (f->next != dvbdmxfilter)
-			f = f->next;
-		f->next = f->next->next;
-	}
-
-	dvbdmxfilter->state = DMX_STATE_FREE;
-	spin_unlock_irq(&dvbdmx->lock);
-	mutex_unlock(&dvbdmx->mutex);
-	return 0;
-}
-
-static int dvbdmx_allocate_section_feed(struct dmx_demux *demux,
-					struct dmx_section_feed **feed,
-					dmx_section_cb callback)
-{
-	struct dvb_demux *dvbdmx = (struct dvb_demux *)demux;
-	struct dvb_demux_feed *dvbdmxfeed;
-
-	if (mutex_lock_interruptible(&dvbdmx->mutex))
-		return -ERESTARTSYS;
-
-	if (!(dvbdmxfeed = dvb_dmx_feed_alloc(dvbdmx))) {
-		mutex_unlock(&dvbdmx->mutex);
-		return -EBUSY;
-	}
-
-	dvbdmxfeed->type = DMX_TYPE_SEC;
-	dvbdmxfeed->cb.sec = callback;
-	dvbdmxfeed->demux = dvbdmx;
-	dvbdmxfeed->pid = 0xffff;
-	dvbdmxfeed->feed.sec.secbuf = dvbdmxfeed->feed.sec.secbuf_base;
-	dvbdmxfeed->feed.sec.secbufp = dvbdmxfeed->feed.sec.seclen = 0;
-	dvbdmxfeed->feed.sec.tsfeedp = 0;
-	dvbdmxfeed->filter = NULL;
-	dvbdmxfeed->buffer = NULL;
-
-	(*feed) = &dvbdmxfeed->feed.sec;
-	(*feed)->is_filtering = 0;
-	(*feed)->parent = demux;
-	(*feed)->priv = NULL;
-
-	(*feed)->set = dmx_section_feed_set;
-	(*feed)->allocate_filter = dmx_section_feed_allocate_filter;
-	(*feed)->start_filtering = dmx_section_feed_start_filtering;
-	(*feed)->stop_filtering = dmx_section_feed_stop_filtering;
-	(*feed)->release_filter = dmx_section_feed_release_filter;
-
-	mutex_unlock(&dvbdmx->mutex);
-	return 0;
-}
-
-static int dvbdmx_release_section_feed(struct dmx_demux *demux,
-				       struct dmx_section_feed *feed)
-{
-	struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *)feed;
-	struct dvb_demux *dvbdmx = (struct dvb_demux *)demux;
-
-	mutex_lock(&dvbdmx->mutex);
-
-	if (dvbdmxfeed->state == DMX_STATE_FREE) {
-		mutex_unlock(&dvbdmx->mutex);
-		return -EINVAL;
-	}
-#ifndef NOBUFS
-	vfree(dvbdmxfeed->buffer);
-	dvbdmxfeed->buffer = NULL;
-#endif
-	dvbdmxfeed->state = DMX_STATE_FREE;
-
-	dvb_demux_feed_del(dvbdmxfeed);
-
-	dvbdmxfeed->pid = 0xffff;
-
-	mutex_unlock(&dvbdmx->mutex);
-	return 0;
-}
-
-/******************************************************************************
- * dvb_demux kernel data API calls
- ******************************************************************************/
-
-static int dvbdmx_open(struct dmx_demux *demux)
-{
-	struct dvb_demux *dvbdemux = (struct dvb_demux *)demux;
-
-	if (dvbdemux->users >= MAX_DVB_DEMUX_USERS)
-		return -EUSERS;
-
-	dvbdemux->users++;
-	return 0;
-}
-
-static int dvbdmx_close(struct dmx_demux *demux)
-{
-	struct dvb_demux *dvbdemux = (struct dvb_demux *)demux;
-
-	if (dvbdemux->users == 0)
-		return -ENODEV;
-
-	dvbdemux->users--;
-	//FIXME: release any unneeded resources if users==0
-	return 0;
-}
-
-static int dvbdmx_write(struct dmx_demux *demux, const char __user *buf, size_t count)
-{
-	struct dvb_demux *dvbdemux = (struct dvb_demux *)demux;
-	void *p;
-
-	if ((!demux->frontend) || (demux->frontend->source != DMX_MEMORY_FE))
-		return -EINVAL;
-
-	p = memdup_user(buf, count);
-	if (IS_ERR(p))
-		return PTR_ERR(p);
-	if (mutex_lock_interruptible(&dvbdemux->mutex)) {
-		kfree(p);
-		return -ERESTARTSYS;
-	}
-	dvb_dmx_swfilter(dvbdemux, p, count);
-	kfree(p);
-	mutex_unlock(&dvbdemux->mutex);
-
-	if (signal_pending(current))
-		return -EINTR;
-	return count;
-}
-
-static int dvbdmx_add_frontend(struct dmx_demux *demux,
-			       struct dmx_frontend *frontend)
-{
-	struct dvb_demux *dvbdemux = (struct dvb_demux *)demux;
-	struct list_head *head = &dvbdemux->frontend_list;
-
-	list_add(&(frontend->connectivity_list), head);
-
-	return 0;
-}
-
-static int dvbdmx_remove_frontend(struct dmx_demux *demux,
-				  struct dmx_frontend *frontend)
-{
-	struct dvb_demux *dvbdemux = (struct dvb_demux *)demux;
-	struct list_head *pos, *n, *head = &dvbdemux->frontend_list;
-
-	list_for_each_safe(pos, n, head) {
-		if (DMX_FE_ENTRY(pos) == frontend) {
-			list_del(pos);
-			return 0;
-		}
-	}
-
-	return -ENODEV;
-}
-
-static struct list_head *dvbdmx_get_frontends(struct dmx_demux *demux)
-{
-	struct dvb_demux *dvbdemux = (struct dvb_demux *)demux;
-
-	if (list_empty(&dvbdemux->frontend_list))
-		return NULL;
-
-	return &dvbdemux->frontend_list;
-}
-
-static int dvbdmx_connect_frontend(struct dmx_demux *demux,
-				   struct dmx_frontend *frontend)
-{
-	struct dvb_demux *dvbdemux = (struct dvb_demux *)demux;
-
-	if (demux->frontend)
-		return -EINVAL;
-
-	mutex_lock(&dvbdemux->mutex);
-
-	demux->frontend = frontend;
-	mutex_unlock(&dvbdemux->mutex);
-	return 0;
-}
-
-static int dvbdmx_disconnect_frontend(struct dmx_demux *demux)
-{
-	struct dvb_demux *dvbdemux = (struct dvb_demux *)demux;
-
-	mutex_lock(&dvbdemux->mutex);
-
-	demux->frontend = NULL;
-	mutex_unlock(&dvbdemux->mutex);
-	return 0;
-}
-
-static int dvbdmx_get_pes_pids(struct dmx_demux *demux, u16 * pids)
-{
-	struct dvb_demux *dvbdemux = (struct dvb_demux *)demux;
-
-	memcpy(pids, dvbdemux->pids, 5 * sizeof(u16));
-	return 0;
-}
-
-int dvb_dmx_init(struct dvb_demux *dvbdemux)
-{
-	int i;
-	struct dmx_demux *dmx = &dvbdemux->dmx;
-
-	dvbdemux->cnt_storage = NULL;
-	dvbdemux->users = 0;
-	dvbdemux->filter = vmalloc(dvbdemux->filternum * sizeof(struct dvb_demux_filter));
-
-	if (!dvbdemux->filter)
-		return -ENOMEM;
-
-	dvbdemux->feed = vmalloc(dvbdemux->feednum * sizeof(struct dvb_demux_feed));
-	if (!dvbdemux->feed) {
-		vfree(dvbdemux->filter);
-		dvbdemux->filter = NULL;
-		return -ENOMEM;
-	}
-	for (i = 0; i < dvbdemux->filternum; i++) {
-		dvbdemux->filter[i].state = DMX_STATE_FREE;
-		dvbdemux->filter[i].index = i;
-	}
-	for (i = 0; i < dvbdemux->feednum; i++) {
-		dvbdemux->feed[i].state = DMX_STATE_FREE;
-		dvbdemux->feed[i].index = i;
-	}
-
-	dvbdemux->cnt_storage = vmalloc(MAX_PID + 1);
-	if (!dvbdemux->cnt_storage)
-		printk(KERN_WARNING "Couldn't allocate memory for TS/TEI check. Disabling it\n");
-
-	INIT_LIST_HEAD(&dvbdemux->frontend_list);
-
-	for (i = 0; i < DMX_TS_PES_OTHER; i++) {
-		dvbdemux->pesfilter[i] = NULL;
-		dvbdemux->pids[i] = 0xffff;
-	}
-
-	INIT_LIST_HEAD(&dvbdemux->feed_list);
-
-	dvbdemux->playing = 0;
-	dvbdemux->recording = 0;
-	dvbdemux->tsbufp = 0;
-
-	if (!dvbdemux->check_crc32)
-		dvbdemux->check_crc32 = dvb_dmx_crc32;
-
-	if (!dvbdemux->memcopy)
-		dvbdemux->memcopy = dvb_dmx_memcopy;
-
-	dmx->frontend = NULL;
-	dmx->priv = dvbdemux;
-	dmx->open = dvbdmx_open;
-	dmx->close = dvbdmx_close;
-	dmx->write = dvbdmx_write;
-	dmx->allocate_ts_feed = dvbdmx_allocate_ts_feed;
-	dmx->release_ts_feed = dvbdmx_release_ts_feed;
-	dmx->allocate_section_feed = dvbdmx_allocate_section_feed;
-	dmx->release_section_feed = dvbdmx_release_section_feed;
-
-	dmx->add_frontend = dvbdmx_add_frontend;
-	dmx->remove_frontend = dvbdmx_remove_frontend;
-	dmx->get_frontends = dvbdmx_get_frontends;
-	dmx->connect_frontend = dvbdmx_connect_frontend;
-	dmx->disconnect_frontend = dvbdmx_disconnect_frontend;
-	dmx->get_pes_pids = dvbdmx_get_pes_pids;
-
-	mutex_init(&dvbdemux->mutex);
-	spin_lock_init(&dvbdemux->lock);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dvb_dmx_init);
-
-void dvb_dmx_release(struct dvb_demux *dvbdemux)
-{
-	vfree(dvbdemux->cnt_storage);
-	vfree(dvbdemux->filter);
-	vfree(dvbdemux->feed);
-}
-
-EXPORT_SYMBOL(dvb_dmx_release);
diff --git a/drivers/media/dvb/dvb-core/dvb_demux.h b/drivers/media/dvb/dvb-core/dvb_demux.h
deleted file mode 100644
index fa7188a..0000000
--- a/drivers/media/dvb/dvb-core/dvb_demux.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * dvb_demux.h: DVB kernel demux API
- *
- * Copyright (C) 2000-2001 Marcus Metzler & Ralph Metzler
- *                         for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#ifndef _DVB_DEMUX_H_
-#define _DVB_DEMUX_H_
-
-#include <linux/time.h>
-#include <linux/timer.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-
-#include "demux.h"
-
-#define DMX_TYPE_TS  0
-#define DMX_TYPE_SEC 1
-#define DMX_TYPE_PES 2
-
-#define DMX_STATE_FREE      0
-#define DMX_STATE_ALLOCATED 1
-#define DMX_STATE_SET       2
-#define DMX_STATE_READY     3
-#define DMX_STATE_GO        4
-
-#define DVB_DEMUX_MASK_MAX 18
-
-#define MAX_PID 0x1fff
-
-#define SPEED_PKTS_INTERVAL 50000
-
-struct dvb_demux_filter {
-	struct dmx_section_filter filter;
-	u8 maskandmode[DMX_MAX_FILTER_SIZE];
-	u8 maskandnotmode[DMX_MAX_FILTER_SIZE];
-	int doneq;
-
-	struct dvb_demux_filter *next;
-	struct dvb_demux_feed *feed;
-	int index;
-	int state;
-	int type;
-
-	u16 hw_handle;
-	struct timer_list timer;
-};
-
-#define DMX_FEED_ENTRY(pos) list_entry(pos, struct dvb_demux_feed, list_head)
-
-struct dvb_demux_feed {
-	union {
-		struct dmx_ts_feed ts;
-		struct dmx_section_feed sec;
-	} feed;
-
-	union {
-		dmx_ts_cb ts;
-		dmx_section_cb sec;
-	} cb;
-
-	struct dvb_demux *demux;
-	void *priv;
-	int type;
-	int state;
-	u16 pid;
-	u8 *buffer;
-	int buffer_size;
-
-	struct timespec timeout;
-	struct dvb_demux_filter *filter;
-
-	int ts_type;
-	enum dmx_ts_pes pes_type;
-
-	int cc;
-	int pusi_seen;		/* prevents feeding of garbage from previous section */
-
-	u16 peslen;
-
-	struct list_head list_head;
-	unsigned int index;	/* a unique index for each feed (can be used as hardware pid filter index) */
-};
-
-struct dvb_demux {
-	struct dmx_demux dmx;
-	void *priv;
-	int filternum;
-	int feednum;
-	int (*start_feed)(struct dvb_demux_feed *feed);
-	int (*stop_feed)(struct dvb_demux_feed *feed);
-	int (*write_to_decoder)(struct dvb_demux_feed *feed,
-				 const u8 *buf, size_t len);
-	u32 (*check_crc32)(struct dvb_demux_feed *feed,
-			    const u8 *buf, size_t len);
-	void (*memcopy)(struct dvb_demux_feed *feed, u8 *dst,
-			 const u8 *src, size_t len);
-
-	int users;
-#define MAX_DVB_DEMUX_USERS 10
-	struct dvb_demux_filter *filter;
-	struct dvb_demux_feed *feed;
-
-	struct list_head frontend_list;
-
-	struct dvb_demux_feed *pesfilter[DMX_TS_PES_OTHER];
-	u16 pids[DMX_TS_PES_OTHER];
-	int playing;
-	int recording;
-
-#define DMX_MAX_PID 0x2000
-	struct list_head feed_list;
-	u8 tsbuf[204];
-	int tsbufp;
-
-	struct mutex mutex;
-	spinlock_t lock;
-
-	uint8_t *cnt_storage; /* for TS continuity check */
-
-	struct timespec speed_last_time; /* for TS speed check */
-	uint32_t speed_pkts_cnt; /* for TS speed check */
-};
-
-int dvb_dmx_init(struct dvb_demux *dvbdemux);
-void dvb_dmx_release(struct dvb_demux *dvbdemux);
-void dvb_dmx_swfilter_packets(struct dvb_demux *dvbdmx, const u8 *buf,
-			      size_t count);
-void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count);
-void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf,
-			  size_t count);
-void dvb_dmx_swfilter_raw(struct dvb_demux *demux, const u8 *buf,
-			  size_t count);
-
-#endif /* _DVB_DEMUX_H_ */
diff --git a/drivers/media/dvb/dvb-core/dvb_filter.c b/drivers/media/dvb/dvb-core/dvb_filter.c
deleted file mode 100644
index 772003f..0000000
--- a/drivers/media/dvb/dvb-core/dvb_filter.c
+++ /dev/null
@@ -1,603 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include "dvb_filter.h"
-
-#if 0
-static unsigned int bitrates[3][16] =
-{{0,32,64,96,128,160,192,224,256,288,320,352,384,416,448,0},
- {0,32,48,56,64,80,96,112,128,160,192,224,256,320,384,0},
- {0,32,40,48,56,64,80,96,112,128,160,192,224,256,320,0}};
-#endif
-
-static u32 freq[4] = {480, 441, 320, 0};
-
-static unsigned int ac3_bitrates[32] =
-    {32,40,48,56,64,80,96,112,128,160,192,224,256,320,384,448,512,576,640,
-     0,0,0,0,0,0,0,0,0,0,0,0,0};
-
-static u32 ac3_frames[3][32] =
-    {{64,80,96,112,128,160,192,224,256,320,384,448,512,640,768,896,1024,
-      1152,1280,0,0,0,0,0,0,0,0,0,0,0,0,0},
-     {69,87,104,121,139,174,208,243,278,348,417,487,557,696,835,975,1114,
-      1253,1393,0,0,0,0,0,0,0,0,0,0,0,0,0},
-     {96,120,144,168,192,240,288,336,384,480,576,672,768,960,1152,1344,
-      1536,1728,1920,0,0,0,0,0,0,0,0,0,0,0,0,0}};
-
-
-
-#if 0
-static void setup_ts2pes(ipack *pa, ipack *pv, u16 *pida, u16 *pidv,
-		  void (*pes_write)(u8 *buf, int count, void *data),
-		  void *priv)
-{
-	dvb_filter_ipack_init(pa, IPACKS, pes_write);
-	dvb_filter_ipack_init(pv, IPACKS, pes_write);
-	pa->pid = pida;
-	pv->pid = pidv;
-	pa->data = priv;
-	pv->data = priv;
-}
-#endif
-
-#if 0
-static void ts_to_pes(ipack *p, u8 *buf) // don't need count (=188)
-{
-	u8 off = 0;
-
-	if (!buf || !p ){
-		printk("NULL POINTER IDIOT\n");
-		return;
-	}
-	if (buf[1]&PAY_START) {
-		if (p->plength == MMAX_PLENGTH-6 && p->found>6){
-			p->plength = p->found-6;
-			p->found = 0;
-			send_ipack(p);
-			dvb_filter_ipack_reset(p);
-		}
-	}
-	if (buf[3] & ADAPT_FIELD) {  // adaptation field?
-		off = buf[4] + 1;
-		if (off+4 > 187) return;
-	}
-	dvb_filter_instant_repack(buf+4+off, TS_SIZE-4-off, p);
-}
-#endif
-
-#if 0
-/* needs 5 byte input, returns picture coding type*/
-static int read_picture_header(u8 *headr, struct mpg_picture *pic, int field, int pr)
-{
-	u8 pct;
-
-	if (pr) printk( "Pic header: ");
-	pic->temporal_reference[field] = (( headr[0] << 2 ) |
-					  (headr[1] & 0x03) )& 0x03ff;
-	if (pr) printk( " temp ref: 0x%04x", pic->temporal_reference[field]);
-
-	pct = ( headr[1] >> 2 ) & 0x07;
-	pic->picture_coding_type[field] = pct;
-	if (pr) {
-		switch(pct){
-			case I_FRAME:
-				printk( "  I-FRAME");
-				break;
-			case B_FRAME:
-				printk( "  B-FRAME");
-				break;
-			case P_FRAME:
-				printk( "  P-FRAME");
-				break;
-		}
-	}
-
-
-	pic->vinfo.vbv_delay  = (( headr[1] >> 5 ) | ( headr[2] << 3) |
-				 ( (headr[3] & 0x1F) << 11) ) & 0xffff;
-
-	if (pr) printk( " vbv delay: 0x%04x", pic->vinfo.vbv_delay);
-
-	pic->picture_header_parameter = ( headr[3] & 0xe0 ) |
-		((headr[4] & 0x80) >> 3);
-
-	if ( pct == B_FRAME ){
-		pic->picture_header_parameter |= ( headr[4] >> 3 ) & 0x0f;
-	}
-	if (pr) printk( " pic head param: 0x%x",
-			pic->picture_header_parameter);
-
-	return pct;
-}
-#endif
-
-#if 0
-/* needs 4 byte input */
-static int read_gop_header(u8 *headr, struct mpg_picture *pic, int pr)
-{
-	if (pr) printk("GOP header: ");
-
-	pic->time_code  = (( headr[0] << 17 ) | ( headr[1] << 9) |
-			   ( headr[2] << 1 ) | (headr[3] &0x01)) & 0x1ffffff;
-
-	if (pr) printk(" time: %d:%d.%d ", (headr[0]>>2)& 0x1F,
-		       ((headr[0]<<4)& 0x30)| ((headr[1]>>4)& 0x0F),
-		       ((headr[1]<<3)& 0x38)| ((headr[2]>>5)& 0x0F));
-
-	if ( ( headr[3] & 0x40 ) != 0 ){
-		pic->closed_gop = 1;
-	} else {
-		pic->closed_gop = 0;
-	}
-	if (pr) printk("closed: %d", pic->closed_gop);
-
-	if ( ( headr[3] & 0x20 ) != 0 ){
-		pic->broken_link = 1;
-	} else {
-		pic->broken_link = 0;
-	}
-	if (pr) printk(" broken: %d\n", pic->broken_link);
-
-	return 0;
-}
-#endif
-
-#if 0
-/* needs 8 byte input */
-static int read_sequence_header(u8 *headr, struct dvb_video_info *vi, int pr)
-{
-	int sw;
-	int form = -1;
-
-	if (pr) printk("Reading sequence header\n");
-
-	vi->horizontal_size	= ((headr[1] &0xF0) >> 4) | (headr[0] << 4);
-	vi->vertical_size	= ((headr[1] &0x0F) << 8) | (headr[2]);
-
-	sw = (int)((headr[3]&0xF0) >> 4) ;
-
-	switch( sw ){
-	case 1:
-		if (pr)
-			printk("Videostream: ASPECT: 1:1");
-		vi->aspect_ratio = 100;
-		break;
-	case 2:
-		if (pr)
-			printk("Videostream: ASPECT: 4:3");
-		vi->aspect_ratio = 133;
-		break;
-	case 3:
-		if (pr)
-			printk("Videostream: ASPECT: 16:9");
-		vi->aspect_ratio = 177;
-		break;
-	case 4:
-		if (pr)
-			printk("Videostream: ASPECT: 2.21:1");
-		vi->aspect_ratio = 221;
-		break;
-
-	case 5 ... 15:
-		if (pr)
-			printk("Videostream: ASPECT: reserved");
-		vi->aspect_ratio = 0;
-		break;
-
-	default:
-		vi->aspect_ratio = 0;
-		return -1;
-	}
-
-	if (pr)
-		printk("  Size = %dx%d",vi->horizontal_size,vi->vertical_size);
-
-	sw = (int)(headr[3]&0x0F);
-
-	switch ( sw ) {
-	case 1:
-		if (pr)
-			printk("  FRate: 23.976 fps");
-		vi->framerate = 23976;
-		form = -1;
-		break;
-	case 2:
-		if (pr)
-			printk("  FRate: 24 fps");
-		vi->framerate = 24000;
-		form = -1;
-		break;
-	case 3:
-		if (pr)
-			printk("  FRate: 25 fps");
-		vi->framerate = 25000;
-		form = VIDEO_MODE_PAL;
-		break;
-	case 4:
-		if (pr)
-			printk("  FRate: 29.97 fps");
-		vi->framerate = 29970;
-		form = VIDEO_MODE_NTSC;
-		break;
-	case 5:
-		if (pr)
-			printk("  FRate: 30 fps");
-		vi->framerate = 30000;
-		form = VIDEO_MODE_NTSC;
-		break;
-	case 6:
-		if (pr)
-			printk("  FRate: 50 fps");
-		vi->framerate = 50000;
-		form = VIDEO_MODE_PAL;
-		break;
-	case 7:
-		if (pr)
-			printk("  FRate: 60 fps");
-		vi->framerate = 60000;
-		form = VIDEO_MODE_NTSC;
-		break;
-	}
-
-	vi->bit_rate = (headr[4] << 10) | (headr[5] << 2) | (headr[6] & 0x03);
-
-	vi->vbv_buffer_size
-		= (( headr[6] & 0xF8) >> 3 ) | (( headr[7] & 0x1F )<< 5);
-
-	if (pr){
-		printk("  BRate: %d Mbit/s",4*(vi->bit_rate)/10000);
-		printk("  vbvbuffer %d",16*1024*(vi->vbv_buffer_size));
-		printk("\n");
-	}
-
-	vi->video_format = form;
-
-	return 0;
-}
-#endif
-
-
-#if 0
-static int get_vinfo(u8 *mbuf, int count, struct dvb_video_info *vi, int pr)
-{
-	u8 *headr;
-	int found = 0;
-	int c = 0;
-
-	while (found < 4 && c+4 < count){
-		u8 *b;
-
-		b = mbuf+c;
-		if ( b[0] == 0x00 && b[1] == 0x00 && b[2] == 0x01
-		     && b[3] == 0xb3) found = 4;
-		else {
-			c++;
-		}
-	}
-
-	if (! found) return -1;
-	c += 4;
-	if (c+12 >= count) return -1;
-	headr = mbuf+c;
-	if (read_sequence_header(headr, vi, pr) < 0) return -1;
-	vi->off = c-4;
-	return 0;
-}
-#endif
-
-
-#if 0
-static int get_ainfo(u8 *mbuf, int count, struct dvb_audio_info *ai, int pr)
-{
-	u8 *headr;
-	int found = 0;
-	int c = 0;
-	int fr = 0;
-
-	while (found < 2 && c < count){
-		u8 b[2];
-		memcpy( b, mbuf+c, 2);
-
-		if ( b[0] == 0xff && (b[1] & 0xf8) == 0xf8)
-			found = 2;
-		else {
-			c++;
-		}
-	}
-
-	if (!found) return -1;
-
-	if (c+3 >= count) return -1;
-	headr = mbuf+c;
-
-	ai->layer = (headr[1] & 0x06) >> 1;
-
-	if (pr)
-		printk("Audiostream: Layer: %d", 4-ai->layer);
-
-
-	ai->bit_rate = bitrates[(3-ai->layer)][(headr[2] >> 4 )]*1000;
-
-	if (pr){
-		if (ai->bit_rate == 0)
-			printk("  Bit rate: free");
-		else if (ai->bit_rate == 0xf)
-			printk("  BRate: reserved");
-		else
-			printk("  BRate: %d kb/s", ai->bit_rate/1000);
-	}
-
-	fr = (headr[2] & 0x0c ) >> 2;
-	ai->frequency = freq[fr]*100;
-	if (pr){
-		if (ai->frequency == 3)
-			printk("  Freq: reserved\n");
-		else
-			printk("  Freq: %d kHz\n",ai->frequency);
-
-	}
-	ai->off = c;
-	return 0;
-}
-#endif
-
-
-int dvb_filter_get_ac3info(u8 *mbuf, int count, struct dvb_audio_info *ai, int pr)
-{
-	u8 *headr;
-	int found = 0;
-	int c = 0;
-	u8 frame = 0;
-	int fr = 0;
-
-	while ( !found  && c < count){
-		u8 *b = mbuf+c;
-
-		if ( b[0] == 0x0b &&  b[1] == 0x77 )
-			found = 1;
-		else {
-			c++;
-		}
-	}
-
-	if (!found) return -1;
-	if (pr)
-		printk("Audiostream: AC3");
-
-	ai->off = c;
-	if (c+5 >= count) return -1;
-
-	ai->layer = 0;  // 0 for AC3
-	headr = mbuf+c+2;
-
-	frame = (headr[2]&0x3f);
-	ai->bit_rate = ac3_bitrates[frame >> 1]*1000;
-
-	if (pr)
-		printk("  BRate: %d kb/s", (int) ai->bit_rate/1000);
-
-	ai->frequency = (headr[2] & 0xc0 ) >> 6;
-	fr = (headr[2] & 0xc0 ) >> 6;
-	ai->frequency = freq[fr]*100;
-	if (pr) printk ("  Freq: %d Hz\n", (int) ai->frequency);
-
-
-	ai->framesize = ac3_frames[fr][frame >> 1];
-	if ((frame & 1) &&  (fr == 1)) ai->framesize++;
-	ai->framesize = ai->framesize << 1;
-	if (pr) printk ("  Framesize %d\n",(int) ai->framesize);
-
-
-	return 0;
-}
-EXPORT_SYMBOL(dvb_filter_get_ac3info);
-
-
-#if 0
-static u8 *skip_pes_header(u8 **bufp)
-{
-	u8 *inbuf = *bufp;
-	u8 *buf = inbuf;
-	u8 *pts = NULL;
-	int skip = 0;
-
-	static const int mpeg1_skip_table[16] = {
-		1, 0xffff,      5,     10, 0xffff, 0xffff, 0xffff, 0xffff,
-		0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff
-	};
-
-
-	if ((inbuf[6] & 0xc0) == 0x80){ /* mpeg2 */
-		if (buf[7] & PTS_ONLY)
-			pts = buf+9;
-		else pts = NULL;
-		buf = inbuf + 9 + inbuf[8];
-	} else {        /* mpeg1 */
-		for (buf = inbuf + 6; *buf == 0xff; buf++)
-			if (buf == inbuf + 6 + 16) {
-				break;
-			}
-		if ((*buf & 0xc0) == 0x40)
-			buf += 2;
-		skip = mpeg1_skip_table [*buf >> 4];
-		if (skip == 5 || skip == 10) pts = buf;
-		else pts = NULL;
-
-		buf += mpeg1_skip_table [*buf >> 4];
-	}
-
-	*bufp = buf;
-	return pts;
-}
-#endif
-
-#if 0
-static void initialize_quant_matrix( u32 *matrix )
-{
-	int i;
-
-	matrix[0]  = 0x08101013;
-	matrix[1]  = 0x10131616;
-	matrix[2]  = 0x16161616;
-	matrix[3]  = 0x1a181a1b;
-	matrix[4]  = 0x1b1b1a1a;
-	matrix[5]  = 0x1a1a1b1b;
-	matrix[6]  = 0x1b1d1d1d;
-	matrix[7]  = 0x2222221d;
-	matrix[8]  = 0x1d1d1b1b;
-	matrix[9]  = 0x1d1d2020;
-	matrix[10] = 0x22222526;
-	matrix[11] = 0x25232322;
-	matrix[12] = 0x23262628;
-	matrix[13] = 0x28283030;
-	matrix[14] = 0x2e2e3838;
-	matrix[15] = 0x3a454553;
-
-	for ( i = 16 ; i < 32 ; i++ )
-		matrix[i] = 0x10101010;
-}
-#endif
-
-#if 0
-static void initialize_mpg_picture(struct mpg_picture *pic)
-{
-	int i;
-
-	/* set MPEG1 */
-	pic->mpeg1_flag = 1;
-	pic->profile_and_level = 0x4A ;        /* MP@LL */
-	pic->progressive_sequence = 1;
-	pic->low_delay = 0;
-
-	pic->sequence_display_extension_flag = 0;
-	for ( i = 0 ; i < 4 ; i++ ){
-		pic->frame_centre_horizontal_offset[i] = 0;
-		pic->frame_centre_vertical_offset[i] = 0;
-	}
-	pic->last_frame_centre_horizontal_offset = 0;
-	pic->last_frame_centre_vertical_offset = 0;
-
-	pic->picture_display_extension_flag[0] = 0;
-	pic->picture_display_extension_flag[1] = 0;
-	pic->sequence_header_flag = 0;
-	pic->gop_flag = 0;
-	pic->sequence_end_flag = 0;
-}
-#endif
-
-#if 0
-static void mpg_set_picture_parameter( int32_t field_type, struct mpg_picture *pic )
-{
-	int16_t last_h_offset;
-	int16_t last_v_offset;
-
-	int16_t *p_h_offset;
-	int16_t *p_v_offset;
-
-	if ( pic->mpeg1_flag ){
-		pic->picture_structure[field_type] = VIDEO_FRAME_PICTURE;
-		pic->top_field_first = 0;
-		pic->repeat_first_field = 0;
-		pic->progressive_frame = 1;
-		pic->picture_coding_parameter = 0x000010;
-	}
-
-	/* Reset flag */
-	pic->picture_display_extension_flag[field_type] = 0;
-
-	last_h_offset = pic->last_frame_centre_horizontal_offset;
-	last_v_offset = pic->last_frame_centre_vertical_offset;
-	if ( field_type == FIRST_FIELD ){
-		p_h_offset = pic->frame_centre_horizontal_offset;
-		p_v_offset = pic->frame_centre_vertical_offset;
-		*p_h_offset = last_h_offset;
-		*(p_h_offset + 1) = last_h_offset;
-		*(p_h_offset + 2) = last_h_offset;
-		*p_v_offset = last_v_offset;
-		*(p_v_offset + 1) = last_v_offset;
-		*(p_v_offset + 2) = last_v_offset;
-	} else {
-		pic->frame_centre_horizontal_offset[3] = last_h_offset;
-		pic->frame_centre_vertical_offset[3] = last_v_offset;
-	}
-}
-#endif
-
-#if 0
-static void init_mpg_picture( struct mpg_picture *pic, int chan, int32_t field_type)
-{
-	pic->picture_header = 0;
-	pic->sequence_header_data
-		= ( INIT_HORIZONTAL_SIZE << 20 )
-			| ( INIT_VERTICAL_SIZE << 8 )
-			| ( INIT_ASPECT_RATIO << 4 )
-			| ( INIT_FRAME_RATE );
-	pic->mpeg1_flag = 0;
-	pic->vinfo.horizontal_size
-		= INIT_DISP_HORIZONTAL_SIZE;
-	pic->vinfo.vertical_size
-		= INIT_DISP_VERTICAL_SIZE;
-	pic->picture_display_extension_flag[field_type]
-		= 0;
-	pic->pts_flag[field_type] = 0;
-
-	pic->sequence_gop_header = 0;
-	pic->picture_header = 0;
-	pic->sequence_header_flag = 0;
-	pic->gop_flag = 0;
-	pic->sequence_end_flag = 0;
-	pic->sequence_display_extension_flag = 0;
-	pic->last_frame_centre_horizontal_offset = 0;
-	pic->last_frame_centre_vertical_offset = 0;
-	pic->channel = chan;
-}
-#endif
-
-void dvb_filter_pes2ts_init(struct dvb_filter_pes2ts *p2ts, unsigned short pid,
-			    dvb_filter_pes2ts_cb_t *cb, void *priv)
-{
-	unsigned char *buf=p2ts->buf;
-
-	buf[0]=0x47;
-	buf[1]=(pid>>8);
-	buf[2]=pid&0xff;
-	p2ts->cc=0;
-	p2ts->cb=cb;
-	p2ts->priv=priv;
-}
-EXPORT_SYMBOL(dvb_filter_pes2ts_init);
-
-int dvb_filter_pes2ts(struct dvb_filter_pes2ts *p2ts, unsigned char *pes,
-		      int len, int payload_start)
-{
-	unsigned char *buf=p2ts->buf;
-	int ret=0, rest;
-
-	//len=6+((pes[4]<<8)|pes[5]);
-
-	if (payload_start)
-		buf[1]|=0x40;
-	else
-		buf[1]&=~0x40;
-	while (len>=184) {
-		buf[3]=0x10|((p2ts->cc++)&0x0f);
-		memcpy(buf+4, pes, 184);
-		if ((ret=p2ts->cb(p2ts->priv, buf)))
-			return ret;
-		len-=184; pes+=184;
-		buf[1]&=~0x40;
-	}
-	if (!len)
-		return 0;
-	buf[3]=0x30|((p2ts->cc++)&0x0f);
-	rest=183-len;
-	if (rest) {
-		buf[5]=0x00;
-		if (rest-1)
-			memset(buf+6, 0xff, rest-1);
-	}
-	buf[4]=rest;
-	memcpy(buf+5+rest, pes, len);
-	return p2ts->cb(p2ts->priv, buf);
-}
-EXPORT_SYMBOL(dvb_filter_pes2ts);
diff --git a/drivers/media/dvb/dvb-core/dvb_filter.h b/drivers/media/dvb/dvb-core/dvb_filter.h
deleted file mode 100644
index 375e3be..0000000
--- a/drivers/media/dvb/dvb-core/dvb_filter.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * dvb_filter.h
- *
- * Copyright (C) 2003 Convergence GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef _DVB_FILTER_H_
-#define _DVB_FILTER_H_
-
-#include <linux/slab.h>
-
-#include "demux.h"
-
-typedef int (dvb_filter_pes2ts_cb_t) (void *, unsigned char *);
-
-struct dvb_filter_pes2ts {
-	unsigned char buf[188];
-	unsigned char cc;
-	dvb_filter_pes2ts_cb_t *cb;
-	void *priv;
-};
-
-void dvb_filter_pes2ts_init(struct dvb_filter_pes2ts *p2ts, unsigned short pid,
-			    dvb_filter_pes2ts_cb_t *cb, void *priv);
-
-int dvb_filter_pes2ts(struct dvb_filter_pes2ts *p2ts, unsigned char *pes,
-		      int len, int payload_start);
-
-
-#define PROG_STREAM_MAP  0xBC
-#define PRIVATE_STREAM1  0xBD
-#define PADDING_STREAM   0xBE
-#define PRIVATE_STREAM2  0xBF
-#define AUDIO_STREAM_S   0xC0
-#define AUDIO_STREAM_E   0xDF
-#define VIDEO_STREAM_S   0xE0
-#define VIDEO_STREAM_E   0xEF
-#define ECM_STREAM       0xF0
-#define EMM_STREAM       0xF1
-#define DSM_CC_STREAM    0xF2
-#define ISO13522_STREAM  0xF3
-#define PROG_STREAM_DIR  0xFF
-
-#define DVB_PICTURE_START    0x00
-#define DVB_USER_START       0xb2
-#define DVB_SEQUENCE_HEADER  0xb3
-#define DVB_SEQUENCE_ERROR   0xb4
-#define DVB_EXTENSION_START  0xb5
-#define DVB_SEQUENCE_END     0xb7
-#define DVB_GOP_START        0xb8
-#define DVB_EXCEPT_SLICE     0xb0
-
-#define SEQUENCE_EXTENSION           0x01
-#define SEQUENCE_DISPLAY_EXTENSION   0x02
-#define PICTURE_CODING_EXTENSION     0x08
-#define QUANT_MATRIX_EXTENSION       0x03
-#define PICTURE_DISPLAY_EXTENSION    0x07
-
-#define I_FRAME 0x01
-#define B_FRAME 0x02
-#define P_FRAME 0x03
-
-/* Initialize sequence_data */
-#define INIT_HORIZONTAL_SIZE        720
-#define INIT_VERTICAL_SIZE          576
-#define INIT_ASPECT_RATIO          0x02
-#define INIT_FRAME_RATE            0x03
-#define INIT_DISP_HORIZONTAL_SIZE   540
-#define INIT_DISP_VERTICAL_SIZE     576
-
-
-//flags2
-#define PTS_DTS_FLAGS    0xC0
-#define ESCR_FLAG        0x20
-#define ES_RATE_FLAG     0x10
-#define DSM_TRICK_FLAG   0x08
-#define ADD_CPY_FLAG     0x04
-#define PES_CRC_FLAG     0x02
-#define PES_EXT_FLAG     0x01
-
-//pts_dts flags
-#define PTS_ONLY         0x80
-#define PTS_DTS          0xC0
-
-#define TS_SIZE        188
-#define TRANS_ERROR    0x80
-#define PAY_START      0x40
-#define TRANS_PRIO     0x20
-#define PID_MASK_HI    0x1F
-//flags
-#define TRANS_SCRMBL1  0x80
-#define TRANS_SCRMBL2  0x40
-#define ADAPT_FIELD    0x20
-#define PAYLOAD        0x10
-#define COUNT_MASK     0x0F
-
-// adaptation flags
-#define DISCON_IND     0x80
-#define RAND_ACC_IND   0x40
-#define ES_PRI_IND     0x20
-#define PCR_FLAG       0x10
-#define OPCR_FLAG      0x08
-#define SPLICE_FLAG    0x04
-#define TRANS_PRIV     0x02
-#define ADAP_EXT_FLAG  0x01
-
-// adaptation extension flags
-#define LTW_FLAG       0x80
-#define PIECE_RATE     0x40
-#define SEAM_SPLICE    0x20
-
-
-#define MAX_PLENGTH 0xFFFF
-#define MMAX_PLENGTH (256*MAX_PLENGTH)
-
-#ifndef IPACKS
-#define IPACKS 2048
-#endif
-
-struct ipack {
-	int size;
-	int found;
-	u8 *buf;
-	u8 cid;
-	u32 plength;
-	u8 plen[2];
-	u8 flag1;
-	u8 flag2;
-	u8 hlength;
-	u8 pts[5];
-	u16 *pid;
-	int mpeg;
-	u8 check;
-	int which;
-	int done;
-	void *data;
-	void (*func)(u8 *buf,  int size, void *priv);
-	int count;
-	int repack_subids;
-};
-
-struct dvb_video_info {
-	u32 horizontal_size;
-	u32 vertical_size;
-	u32 aspect_ratio;
-	u32 framerate;
-	u32 video_format;
-	u32 bit_rate;
-	u32 comp_bit_rate;
-	u32 vbv_buffer_size;
-	s16 vbv_delay;
-	u32 CSPF;
-	u32 off;
-};
-
-#define OFF_SIZE 4
-#define FIRST_FIELD 0
-#define SECOND_FIELD 1
-#define VIDEO_FRAME_PICTURE 0x03
-
-struct mpg_picture {
-	int       channel;
-	struct dvb_video_info vinfo;
-	u32      *sequence_gop_header;
-	u32      *picture_header;
-	s32       time_code;
-	int       low_delay;
-	int       closed_gop;
-	int       broken_link;
-	int       sequence_header_flag;
-	int       gop_flag;
-	int       sequence_end_flag;
-
-	u8        profile_and_level;
-	s32       picture_coding_parameter;
-	u32       matrix[32];
-	s8        matrix_change_flag;
-
-	u8        picture_header_parameter;
-  /* bit 0 - 2: bwd f code
-     bit 3    : fpb vector
-     bit 4 - 6: fwd f code
-     bit 7    : fpf vector */
-
-	int       mpeg1_flag;
-	int       progressive_sequence;
-	int       sequence_display_extension_flag;
-	u32       sequence_header_data;
-	s16       last_frame_centre_horizontal_offset;
-	s16       last_frame_centre_vertical_offset;
-
-	u32       pts[2]; /* [0] 1st field, [1] 2nd field */
-	int       top_field_first;
-	int       repeat_first_field;
-	int       progressive_frame;
-	int       bank;
-	int       forward_bank;
-	int       backward_bank;
-	int       compress;
-	s16       frame_centre_horizontal_offset[OFF_SIZE];
-		  /* [0-2] 1st field, [3] 2nd field */
-	s16       frame_centre_vertical_offset[OFF_SIZE];
-		  /* [0-2] 1st field, [3] 2nd field */
-	s16       temporal_reference[2];
-		  /* [0] 1st field, [1] 2nd field */
-
-	s8        picture_coding_type[2];
-		  /* [0] 1st field, [1] 2nd field */
-	s8        picture_structure[2];
-		  /* [0] 1st field, [1] 2nd field */
-	s8        picture_display_extension_flag[2];
-		  /* [0] 1st field, [1] 2nd field */
-		  /* picture_display_extenion() 0:no 1:exit*/
-	s8        pts_flag[2];
-		  /* [0] 1st field, [1] 2nd field */
-};
-
-struct dvb_audio_info {
-	int layer;
-	u32 bit_rate;
-	u32 frequency;
-	u32 mode;
-	u32 mode_extension ;
-	u32 emphasis;
-	u32 framesize;
-	u32 off;
-};
-
-int dvb_filter_get_ac3info(u8 *mbuf, int count, struct dvb_audio_info *ai, int pr);
-
-
-#endif
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
deleted file mode 100644
index aebcdf2..0000000
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ /dev/null
@@ -1,2563 +0,0 @@
-/*
- * dvb_frontend.c: DVB frontend tuning interface/thread
- *
- *
- * Copyright (C) 1999-2001 Ralph  Metzler
- *			   Marcus Metzler
- *			   Holger Waechtler
- *				      for convergence integrated media GmbH
- *
- * Copyright (C) 2004 Andrew de Quincey (tuning thread cleanup)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- */
-
-/* Enables DVBv3 compatibility bits at the headers */
-#define __DVB_CORE__
-
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
-#include <linux/semaphore.h>
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/freezer.h>
-#include <linux/jiffies.h>
-#include <linux/kthread.h>
-#include <asm/processor.h>
-
-#include "dvb_frontend.h"
-#include "dvbdev.h"
-#include <linux/dvb/version.h>
-
-static int dvb_frontend_debug;
-static int dvb_shutdown_timeout;
-static int dvb_force_auto_inversion;
-static int dvb_override_tune_delay;
-static int dvb_powerdown_on_sleep = 1;
-static int dvb_mfe_wait_time = 5;
-
-module_param_named(frontend_debug, dvb_frontend_debug, int, 0644);
-MODULE_PARM_DESC(frontend_debug, "Turn on/off frontend core debugging (default:off).");
-module_param(dvb_shutdown_timeout, int, 0644);
-MODULE_PARM_DESC(dvb_shutdown_timeout, "wait <shutdown_timeout> seconds after close() before suspending hardware");
-module_param(dvb_force_auto_inversion, int, 0644);
-MODULE_PARM_DESC(dvb_force_auto_inversion, "0: normal (default), 1: INVERSION_AUTO forced always");
-module_param(dvb_override_tune_delay, int, 0644);
-MODULE_PARM_DESC(dvb_override_tune_delay, "0: normal (default), >0 => delay in milliseconds to wait for lock after a tune attempt");
-module_param(dvb_powerdown_on_sleep, int, 0644);
-MODULE_PARM_DESC(dvb_powerdown_on_sleep, "0: do not power down, 1: turn LNB voltage off on sleep (default)");
-module_param(dvb_mfe_wait_time, int, 0644);
-MODULE_PARM_DESC(dvb_mfe_wait_time, "Wait up to <mfe_wait_time> seconds on open() for multi-frontend to become available (default:5 seconds)");
-
-#define dprintk if (dvb_frontend_debug) printk
-
-#define FESTATE_IDLE 1
-#define FESTATE_RETUNE 2
-#define FESTATE_TUNING_FAST 4
-#define FESTATE_TUNING_SLOW 8
-#define FESTATE_TUNED 16
-#define FESTATE_ZIGZAG_FAST 32
-#define FESTATE_ZIGZAG_SLOW 64
-#define FESTATE_DISEQC 128
-#define FESTATE_ERROR 256
-#define FESTATE_WAITFORLOCK (FESTATE_TUNING_FAST | FESTATE_TUNING_SLOW | FESTATE_ZIGZAG_FAST | FESTATE_ZIGZAG_SLOW | FESTATE_DISEQC)
-#define FESTATE_SEARCHING_FAST (FESTATE_TUNING_FAST | FESTATE_ZIGZAG_FAST)
-#define FESTATE_SEARCHING_SLOW (FESTATE_TUNING_SLOW | FESTATE_ZIGZAG_SLOW)
-#define FESTATE_LOSTLOCK (FESTATE_ZIGZAG_FAST | FESTATE_ZIGZAG_SLOW)
-
-#define FE_ALGO_HW		1
-/*
- * FESTATE_IDLE. No tuning parameters have been supplied and the loop is idling.
- * FESTATE_RETUNE. Parameters have been supplied, but we have not yet performed the first tune.
- * FESTATE_TUNING_FAST. Tuning parameters have been supplied and fast zigzag scan is in progress.
- * FESTATE_TUNING_SLOW. Tuning parameters have been supplied. Fast zigzag failed, so we're trying again, but slower.
- * FESTATE_TUNED. The frontend has successfully locked on.
- * FESTATE_ZIGZAG_FAST. The lock has been lost, and a fast zigzag has been initiated to try and regain it.
- * FESTATE_ZIGZAG_SLOW. The lock has been lost. Fast zigzag has been failed, so we're trying again, but slower.
- * FESTATE_DISEQC. A DISEQC command has just been issued.
- * FESTATE_WAITFORLOCK. When we're waiting for a lock.
- * FESTATE_SEARCHING_FAST. When we're searching for a signal using a fast zigzag scan.
- * FESTATE_SEARCHING_SLOW. When we're searching for a signal using a slow zigzag scan.
- * FESTATE_LOSTLOCK. When the lock has been lost, and we're searching it again.
- */
-
-#define DVB_FE_NO_EXIT	0
-#define DVB_FE_NORMAL_EXIT	1
-#define DVB_FE_DEVICE_REMOVED	2
-
-static DEFINE_MUTEX(frontend_mutex);
-
-struct dvb_frontend_private {
-
-	/* thread/frontend values */
-	struct dvb_device *dvbdev;
-	struct dvb_frontend_parameters parameters_out;
-	struct dvb_fe_events events;
-	struct semaphore sem;
-	struct list_head list_head;
-	wait_queue_head_t wait_queue;
-	struct task_struct *thread;
-	unsigned long release_jiffies;
-	unsigned int exit;
-	unsigned int wakeup;
-	fe_status_t status;
-	unsigned long tune_mode_flags;
-	unsigned int delay;
-	unsigned int reinitialise;
-	int tone;
-	int voltage;
-
-	/* swzigzag values */
-	unsigned int state;
-	unsigned int bending;
-	int lnb_drift;
-	unsigned int inversion;
-	unsigned int auto_step;
-	unsigned int auto_sub_step;
-	unsigned int started_auto_step;
-	unsigned int min_delay;
-	unsigned int max_drift;
-	unsigned int step_size;
-	int quality;
-	unsigned int check_wrapped;
-	enum dvbfe_search algo_status;
-};
-
-static void dvb_frontend_wakeup(struct dvb_frontend *fe);
-static int dtv_get_frontend(struct dvb_frontend *fe,
-			    struct dvb_frontend_parameters *p_out);
-static int dtv_property_legacy_params_sync(struct dvb_frontend *fe,
-					   struct dvb_frontend_parameters *p);
-
-static bool has_get_frontend(struct dvb_frontend *fe)
-{
-	return fe->ops.get_frontend != NULL;
-}
-
-/*
- * Due to DVBv3 API calls, a delivery system should be mapped into one of
- * the 4 DVBv3 delivery systems (FE_QPSK, FE_QAM, FE_OFDM or FE_ATSC),
- * otherwise, a DVBv3 call will fail.
- */
-enum dvbv3_emulation_type {
-	DVBV3_UNKNOWN,
-	DVBV3_QPSK,
-	DVBV3_QAM,
-	DVBV3_OFDM,
-	DVBV3_ATSC,
-};
-
-static enum dvbv3_emulation_type dvbv3_type(u32 delivery_system)
-{
-	switch (delivery_system) {
-	case SYS_DVBC_ANNEX_A:
-	case SYS_DVBC_ANNEX_C:
-		return DVBV3_QAM;
-	case SYS_DVBS:
-	case SYS_DVBS2:
-	case SYS_TURBO:
-	case SYS_ISDBS:
-	case SYS_DSS:
-		return DVBV3_QPSK;
-	case SYS_DVBT:
-	case SYS_DVBT2:
-	case SYS_ISDBT:
-	case SYS_DMBTH:
-		return DVBV3_OFDM;
-	case SYS_ATSC:
-	case SYS_ATSCMH:
-	case SYS_DVBC_ANNEX_B:
-		return DVBV3_ATSC;
-	case SYS_UNDEFINED:
-	case SYS_ISDBC:
-	case SYS_DVBH:
-	case SYS_DAB:
-	default:
-		/*
-		 * Doesn't know how to emulate those types and/or
-		 * there's no frontend driver from this type yet
-		 * with some emulation code, so, we're not sure yet how
-		 * to handle them, or they're not compatible with a DVBv3 call.
-		 */
-		return DVBV3_UNKNOWN;
-	}
-}
-
-static void dvb_frontend_add_event(struct dvb_frontend *fe, fe_status_t status)
-{
-	struct dvb_frontend_private *fepriv = fe->frontend_priv;
-	struct dvb_fe_events *events = &fepriv->events;
-	struct dvb_frontend_event *e;
-	int wp;
-
-	dprintk ("%s\n", __func__);
-
-	if ((status & FE_HAS_LOCK) && has_get_frontend(fe))
-		dtv_get_frontend(fe, &fepriv->parameters_out);
-
-	mutex_lock(&events->mtx);
-
-	wp = (events->eventw + 1) % MAX_EVENT;
-	if (wp == events->eventr) {
-		events->overflow = 1;
-		events->eventr = (events->eventr + 1) % MAX_EVENT;
-	}
-
-	e = &events->events[events->eventw];
-	e->status = status;
-	e->parameters = fepriv->parameters_out;
-
-	events->eventw = wp;
-
-	mutex_unlock(&events->mtx);
-
-	wake_up_interruptible (&events->wait_queue);
-}
-
-static int dvb_frontend_get_event(struct dvb_frontend *fe,
-			    struct dvb_frontend_event *event, int flags)
-{
-	struct dvb_frontend_private *fepriv = fe->frontend_priv;
-	struct dvb_fe_events *events = &fepriv->events;
-
-	dprintk ("%s\n", __func__);
-
-	if (events->overflow) {
-		events->overflow = 0;
-		return -EOVERFLOW;
-	}
-
-	if (events->eventw == events->eventr) {
-		int ret;
-
-		if (flags & O_NONBLOCK)
-			return -EWOULDBLOCK;
-
-		up(&fepriv->sem);
-
-		ret = wait_event_interruptible (events->wait_queue,
-						events->eventw != events->eventr);
-
-		if (down_interruptible (&fepriv->sem))
-			return -ERESTARTSYS;
-
-		if (ret < 0)
-			return ret;
-	}
-
-	mutex_lock(&events->mtx);
-	*event = events->events[events->eventr];
-	events->eventr = (events->eventr + 1) % MAX_EVENT;
-	mutex_unlock(&events->mtx);
-
-	return 0;
-}
-
-static void dvb_frontend_clear_events(struct dvb_frontend *fe)
-{
-	struct dvb_frontend_private *fepriv = fe->frontend_priv;
-	struct dvb_fe_events *events = &fepriv->events;
-
-	mutex_lock(&events->mtx);
-	events->eventr = events->eventw;
-	mutex_unlock(&events->mtx);
-}
-
-static void dvb_frontend_init(struct dvb_frontend *fe)
-{
-	dprintk ("DVB: initialising adapter %i frontend %i (%s)...\n",
-		 fe->dvb->num,
-		 fe->id,
-		 fe->ops.info.name);
-
-	if (fe->ops.init)
-		fe->ops.init(fe);
-	if (fe->ops.tuner_ops.init) {
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 1);
-		fe->ops.tuner_ops.init(fe);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-}
-
-void dvb_frontend_reinitialise(struct dvb_frontend *fe)
-{
-	struct dvb_frontend_private *fepriv = fe->frontend_priv;
-
-	fepriv->reinitialise = 1;
-	dvb_frontend_wakeup(fe);
-}
-EXPORT_SYMBOL(dvb_frontend_reinitialise);
-
-static void dvb_frontend_swzigzag_update_delay(struct dvb_frontend_private *fepriv, int locked)
-{
-	int q2;
-
-	dprintk ("%s\n", __func__);
-
-	if (locked)
-		(fepriv->quality) = (fepriv->quality * 220 + 36*256) / 256;
-	else
-		(fepriv->quality) = (fepriv->quality * 220 + 0) / 256;
-
-	q2 = fepriv->quality - 128;
-	q2 *= q2;
-
-	fepriv->delay = fepriv->min_delay + q2 * HZ / (128*128);
-}
-
-/**
- * Performs automatic twiddling of frontend parameters.
- *
- * @param fe The frontend concerned.
- * @param check_wrapped Checks if an iteration has completed. DO NOT SET ON THE FIRST ATTEMPT
- * @returns Number of complete iterations that have been performed.
- */
-static int dvb_frontend_swzigzag_autotune(struct dvb_frontend *fe, int check_wrapped)
-{
-	int autoinversion;
-	int ready = 0;
-	int fe_set_err = 0;
-	struct dvb_frontend_private *fepriv = fe->frontend_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache, tmp;
-	int original_inversion = c->inversion;
-	u32 original_frequency = c->frequency;
-
-	/* are we using autoinversion? */
-	autoinversion = ((!(fe->ops.info.caps & FE_CAN_INVERSION_AUTO)) &&
-			 (c->inversion == INVERSION_AUTO));
-
-	/* setup parameters correctly */
-	while(!ready) {
-		/* calculate the lnb_drift */
-		fepriv->lnb_drift = fepriv->auto_step * fepriv->step_size;
-
-		/* wrap the auto_step if we've exceeded the maximum drift */
-		if (fepriv->lnb_drift > fepriv->max_drift) {
-			fepriv->auto_step = 0;
-			fepriv->auto_sub_step = 0;
-			fepriv->lnb_drift = 0;
-		}
-
-		/* perform inversion and +/- zigzag */
-		switch(fepriv->auto_sub_step) {
-		case 0:
-			/* try with the current inversion and current drift setting */
-			ready = 1;
-			break;
-
-		case 1:
-			if (!autoinversion) break;
-
-			fepriv->inversion = (fepriv->inversion == INVERSION_OFF) ? INVERSION_ON : INVERSION_OFF;
-			ready = 1;
-			break;
-
-		case 2:
-			if (fepriv->lnb_drift == 0) break;
-
-			fepriv->lnb_drift = -fepriv->lnb_drift;
-			ready = 1;
-			break;
-
-		case 3:
-			if (fepriv->lnb_drift == 0) break;
-			if (!autoinversion) break;
-
-			fepriv->inversion = (fepriv->inversion == INVERSION_OFF) ? INVERSION_ON : INVERSION_OFF;
-			fepriv->lnb_drift = -fepriv->lnb_drift;
-			ready = 1;
-			break;
-
-		default:
-			fepriv->auto_step++;
-			fepriv->auto_sub_step = -1; /* it'll be incremented to 0 in a moment */
-			break;
-		}
-
-		if (!ready) fepriv->auto_sub_step++;
-	}
-
-	/* if this attempt would hit where we started, indicate a complete
-	 * iteration has occurred */
-	if ((fepriv->auto_step == fepriv->started_auto_step) &&
-	    (fepriv->auto_sub_step == 0) && check_wrapped) {
-		return 1;
-	}
-
-	dprintk("%s: drift:%i inversion:%i auto_step:%i "
-		"auto_sub_step:%i started_auto_step:%i\n",
-		__func__, fepriv->lnb_drift, fepriv->inversion,
-		fepriv->auto_step, fepriv->auto_sub_step, fepriv->started_auto_step);
-
-	/* set the frontend itself */
-	c->frequency += fepriv->lnb_drift;
-	if (autoinversion)
-		c->inversion = fepriv->inversion;
-	tmp = *c;
-	if (fe->ops.set_frontend)
-		fe_set_err = fe->ops.set_frontend(fe);
-	*c = tmp;
-	if (fe_set_err < 0) {
-		fepriv->state = FESTATE_ERROR;
-		return fe_set_err;
-	}
-
-	c->frequency = original_frequency;
-	c->inversion = original_inversion;
-
-	fepriv->auto_sub_step++;
-	return 0;
-}
-
-static void dvb_frontend_swzigzag(struct dvb_frontend *fe)
-{
-	fe_status_t s = 0;
-	int retval = 0;
-	struct dvb_frontend_private *fepriv = fe->frontend_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache, tmp;
-
-	/* if we've got no parameters, just keep idling */
-	if (fepriv->state & FESTATE_IDLE) {
-		fepriv->delay = 3*HZ;
-		fepriv->quality = 0;
-		return;
-	}
-
-	/* in SCAN mode, we just set the frontend when asked and leave it alone */
-	if (fepriv->tune_mode_flags & FE_TUNE_MODE_ONESHOT) {
-		if (fepriv->state & FESTATE_RETUNE) {
-			tmp = *c;
-			if (fe->ops.set_frontend)
-				retval = fe->ops.set_frontend(fe);
-			*c = tmp;
-			if (retval < 0)
-				fepriv->state = FESTATE_ERROR;
-			else
-				fepriv->state = FESTATE_TUNED;
-		}
-		fepriv->delay = 3*HZ;
-		fepriv->quality = 0;
-		return;
-	}
-
-	/* get the frontend status */
-	if (fepriv->state & FESTATE_RETUNE) {
-		s = 0;
-	} else {
-		if (fe->ops.read_status)
-			fe->ops.read_status(fe, &s);
-		if (s != fepriv->status) {
-			dvb_frontend_add_event(fe, s);
-			fepriv->status = s;
-		}
-	}
-
-	/* if we're not tuned, and we have a lock, move to the TUNED state */
-	if ((fepriv->state & FESTATE_WAITFORLOCK) && (s & FE_HAS_LOCK)) {
-		dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK);
-		fepriv->state = FESTATE_TUNED;
-
-		/* if we're tuned, then we have determined the correct inversion */
-		if ((!(fe->ops.info.caps & FE_CAN_INVERSION_AUTO)) &&
-		    (c->inversion == INVERSION_AUTO)) {
-			c->inversion = fepriv->inversion;
-		}
-		return;
-	}
-
-	/* if we are tuned already, check we're still locked */
-	if (fepriv->state & FESTATE_TUNED) {
-		dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK);
-
-		/* we're tuned, and the lock is still good... */
-		if (s & FE_HAS_LOCK) {
-			return;
-		} else { /* if we _WERE_ tuned, but now don't have a lock */
-			fepriv->state = FESTATE_ZIGZAG_FAST;
-			fepriv->started_auto_step = fepriv->auto_step;
-			fepriv->check_wrapped = 0;
-		}
-	}
-
-	/* don't actually do anything if we're in the LOSTLOCK state,
-	 * the frontend is set to FE_CAN_RECOVER, and the max_drift is 0 */
-	if ((fepriv->state & FESTATE_LOSTLOCK) &&
-	    (fe->ops.info.caps & FE_CAN_RECOVER) && (fepriv->max_drift == 0)) {
-		dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK);
-		return;
-	}
-
-	/* don't do anything if we're in the DISEQC state, since this
-	 * might be someone with a motorized dish controlled by DISEQC.
-	 * If its actually a re-tune, there will be a SET_FRONTEND soon enough.	*/
-	if (fepriv->state & FESTATE_DISEQC) {
-		dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK);
-		return;
-	}
-
-	/* if we're in the RETUNE state, set everything up for a brand
-	 * new scan, keeping the current inversion setting, as the next
-	 * tune is _very_ likely to require the same */
-	if (fepriv->state & FESTATE_RETUNE) {
-		fepriv->lnb_drift = 0;
-		fepriv->auto_step = 0;
-		fepriv->auto_sub_step = 0;
-		fepriv->started_auto_step = 0;
-		fepriv->check_wrapped = 0;
-	}
-
-	/* fast zigzag. */
-	if ((fepriv->state & FESTATE_SEARCHING_FAST) || (fepriv->state & FESTATE_RETUNE)) {
-		fepriv->delay = fepriv->min_delay;
-
-		/* perform a tune */
-		retval = dvb_frontend_swzigzag_autotune(fe,
-							fepriv->check_wrapped);
-		if (retval < 0) {
-			return;
-		} else if (retval) {
-			/* OK, if we've run out of trials at the fast speed.
-			 * Drop back to slow for the _next_ attempt */
-			fepriv->state = FESTATE_SEARCHING_SLOW;
-			fepriv->started_auto_step = fepriv->auto_step;
-			return;
-		}
-		fepriv->check_wrapped = 1;
-
-		/* if we've just retuned, enter the ZIGZAG_FAST state.
-		 * This ensures we cannot return from an
-		 * FE_SET_FRONTEND ioctl before the first frontend tune
-		 * occurs */
-		if (fepriv->state & FESTATE_RETUNE) {
-			fepriv->state = FESTATE_TUNING_FAST;
-		}
-	}
-
-	/* slow zigzag */
-	if (fepriv->state & FESTATE_SEARCHING_SLOW) {
-		dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK);
-
-		/* Note: don't bother checking for wrapping; we stay in this
-		 * state until we get a lock */
-		dvb_frontend_swzigzag_autotune(fe, 0);
-	}
-}
-
-static int dvb_frontend_is_exiting(struct dvb_frontend *fe)
-{
-	struct dvb_frontend_private *fepriv = fe->frontend_priv;
-
-	if (fepriv->exit != DVB_FE_NO_EXIT)
-		return 1;
-
-	if (fepriv->dvbdev->writers == 1)
-		if (time_after_eq(jiffies, fepriv->release_jiffies +
-				  dvb_shutdown_timeout * HZ))
-			return 1;
-
-	return 0;
-}
-
-static int dvb_frontend_should_wakeup(struct dvb_frontend *fe)
-{
-	struct dvb_frontend_private *fepriv = fe->frontend_priv;
-
-	if (fepriv->wakeup) {
-		fepriv->wakeup = 0;
-		return 1;
-	}
-	return dvb_frontend_is_exiting(fe);
-}
-
-static void dvb_frontend_wakeup(struct dvb_frontend *fe)
-{
-	struct dvb_frontend_private *fepriv = fe->frontend_priv;
-
-	fepriv->wakeup = 1;
-	wake_up_interruptible(&fepriv->wait_queue);
-}
-
-static int dvb_frontend_thread(void *data)
-{
-	struct dvb_frontend *fe = data;
-	struct dvb_frontend_private *fepriv = fe->frontend_priv;
-	fe_status_t s;
-	enum dvbfe_algo algo;
-
-	bool re_tune = false;
-
-	dprintk("%s\n", __func__);
-
-	fepriv->check_wrapped = 0;
-	fepriv->quality = 0;
-	fepriv->delay = 3*HZ;
-	fepriv->status = 0;
-	fepriv->wakeup = 0;
-	fepriv->reinitialise = 0;
-
-	dvb_frontend_init(fe);
-
-	set_freezable();
-	while (1) {
-		up(&fepriv->sem);	    /* is locked when we enter the thread... */
-restart:
-		wait_event_interruptible_timeout(fepriv->wait_queue,
-			dvb_frontend_should_wakeup(fe) || kthread_should_stop()
-				|| freezing(current),
-			fepriv->delay);
-
-		if (kthread_should_stop() || dvb_frontend_is_exiting(fe)) {
-			/* got signal or quitting */
-			fepriv->exit = DVB_FE_NORMAL_EXIT;
-			break;
-		}
-
-		if (try_to_freeze())
-			goto restart;
-
-		if (down_interruptible(&fepriv->sem))
-			break;
-
-		if (fepriv->reinitialise) {
-			dvb_frontend_init(fe);
-			if (fe->ops.set_tone && fepriv->tone != -1)
-				fe->ops.set_tone(fe, fepriv->tone);
-			if (fe->ops.set_voltage && fepriv->voltage != -1)
-				fe->ops.set_voltage(fe, fepriv->voltage);
-			fepriv->reinitialise = 0;
-		}
-
-		/* do an iteration of the tuning loop */
-		if (fe->ops.get_frontend_algo) {
-			algo = fe->ops.get_frontend_algo(fe);
-			switch (algo) {
-			case DVBFE_ALGO_HW:
-				dprintk("%s: Frontend ALGO = DVBFE_ALGO_HW\n", __func__);
-
-				if (fepriv->state & FESTATE_RETUNE) {
-					dprintk("%s: Retune requested, FESTATE_RETUNE\n", __func__);
-					re_tune = true;
-					fepriv->state = FESTATE_TUNED;
-				} else {
-					re_tune = false;
-				}
-
-				if (fe->ops.tune)
-					fe->ops.tune(fe, re_tune, fepriv->tune_mode_flags, &fepriv->delay, &s);
-
-				if (s != fepriv->status && !(fepriv->tune_mode_flags & FE_TUNE_MODE_ONESHOT)) {
-					dprintk("%s: state changed, adding current state\n", __func__);
-					dvb_frontend_add_event(fe, s);
-					fepriv->status = s;
-				}
-				break;
-			case DVBFE_ALGO_SW:
-				dprintk("%s: Frontend ALGO = DVBFE_ALGO_SW\n", __func__);
-				dvb_frontend_swzigzag(fe);
-				break;
-			case DVBFE_ALGO_CUSTOM:
-				dprintk("%s: Frontend ALGO = DVBFE_ALGO_CUSTOM, state=%d\n", __func__, fepriv->state);
-				if (fepriv->state & FESTATE_RETUNE) {
-					dprintk("%s: Retune requested, FESTAT_RETUNE\n", __func__);
-					fepriv->state = FESTATE_TUNED;
-				}
-				/* Case where we are going to search for a carrier
-				 * User asked us to retune again for some reason, possibly
-				 * requesting a search with a new set of parameters
-				 */
-				if (fepriv->algo_status & DVBFE_ALGO_SEARCH_AGAIN) {
-					if (fe->ops.search) {
-						fepriv->algo_status = fe->ops.search(fe);
-						/* We did do a search as was requested, the flags are
-						 * now unset as well and has the flags wrt to search.
-						 */
-					} else {
-						fepriv->algo_status &= ~DVBFE_ALGO_SEARCH_AGAIN;
-					}
-				}
-				/* Track the carrier if the search was successful */
-				if (fepriv->algo_status != DVBFE_ALGO_SEARCH_SUCCESS) {
-					fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN;
-					fepriv->delay = HZ / 2;
-				}
-				dtv_property_legacy_params_sync(fe, &fepriv->parameters_out);
-				fe->ops.read_status(fe, &s);
-				if (s != fepriv->status) {
-					dvb_frontend_add_event(fe, s); /* update event list */
-					fepriv->status = s;
-					if (!(s & FE_HAS_LOCK)) {
-						fepriv->delay = HZ / 10;
-						fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN;
-					} else {
-						fepriv->delay = 60 * HZ;
-					}
-				}
-				break;
-			default:
-				dprintk("%s: UNDEFINED ALGO !\n", __func__);
-				break;
-			}
-		} else {
-			dvb_frontend_swzigzag(fe);
-		}
-	}
-
-	if (dvb_powerdown_on_sleep) {
-		if (fe->ops.set_voltage)
-			fe->ops.set_voltage(fe, SEC_VOLTAGE_OFF);
-		if (fe->ops.tuner_ops.sleep) {
-			if (fe->ops.i2c_gate_ctrl)
-				fe->ops.i2c_gate_ctrl(fe, 1);
-			fe->ops.tuner_ops.sleep(fe);
-			if (fe->ops.i2c_gate_ctrl)
-				fe->ops.i2c_gate_ctrl(fe, 0);
-		}
-		if (fe->ops.sleep)
-			fe->ops.sleep(fe);
-	}
-
-	fepriv->thread = NULL;
-	if (kthread_should_stop())
-		fepriv->exit = DVB_FE_DEVICE_REMOVED;
-	else
-		fepriv->exit = DVB_FE_NO_EXIT;
-	mb();
-
-	dvb_frontend_wakeup(fe);
-	return 0;
-}
-
-static void dvb_frontend_stop(struct dvb_frontend *fe)
-{
-	struct dvb_frontend_private *fepriv = fe->frontend_priv;
-
-	dprintk ("%s\n", __func__);
-
-	fepriv->exit = DVB_FE_NORMAL_EXIT;
-	mb();
-
-	if (!fepriv->thread)
-		return;
-
-	kthread_stop(fepriv->thread);
-
-	sema_init(&fepriv->sem, 1);
-	fepriv->state = FESTATE_IDLE;
-
-	/* paranoia check in case a signal arrived */
-	if (fepriv->thread)
-		printk("dvb_frontend_stop: warning: thread %p won't exit\n",
-				fepriv->thread);
-}
-
-s32 timeval_usec_diff(struct timeval lasttime, struct timeval curtime)
-{
-	return ((curtime.tv_usec < lasttime.tv_usec) ?
-		1000000 - lasttime.tv_usec + curtime.tv_usec :
-		curtime.tv_usec - lasttime.tv_usec);
-}
-EXPORT_SYMBOL(timeval_usec_diff);
-
-static inline void timeval_usec_add(struct timeval *curtime, u32 add_usec)
-{
-	curtime->tv_usec += add_usec;
-	if (curtime->tv_usec >= 1000000) {
-		curtime->tv_usec -= 1000000;
-		curtime->tv_sec++;
-	}
-}
-
-/*
- * Sleep until gettimeofday() > waketime + add_usec
- * This needs to be as precise as possible, but as the delay is
- * usually between 2ms and 32ms, it is done using a scheduled msleep
- * followed by usleep (normally a busy-wait loop) for the remainder
- */
-void dvb_frontend_sleep_until(struct timeval *waketime, u32 add_usec)
-{
-	struct timeval lasttime;
-	s32 delta, newdelta;
-
-	timeval_usec_add(waketime, add_usec);
-
-	do_gettimeofday(&lasttime);
-	delta = timeval_usec_diff(lasttime, *waketime);
-	if (delta > 2500) {
-		msleep((delta - 1500) / 1000);
-		do_gettimeofday(&lasttime);
-		newdelta = timeval_usec_diff(lasttime, *waketime);
-		delta = (newdelta > delta) ? 0 : newdelta;
-	}
-	if (delta > 0)
-		udelay(delta);
-}
-EXPORT_SYMBOL(dvb_frontend_sleep_until);
-
-static int dvb_frontend_start(struct dvb_frontend *fe)
-{
-	int ret;
-	struct dvb_frontend_private *fepriv = fe->frontend_priv;
-	struct task_struct *fe_thread;
-
-	dprintk ("%s\n", __func__);
-
-	if (fepriv->thread) {
-		if (fepriv->exit == DVB_FE_NO_EXIT)
-			return 0;
-		else
-			dvb_frontend_stop (fe);
-	}
-
-	if (signal_pending(current))
-		return -EINTR;
-	if (down_interruptible (&fepriv->sem))
-		return -EINTR;
-
-	fepriv->state = FESTATE_IDLE;
-	fepriv->exit = DVB_FE_NO_EXIT;
-	fepriv->thread = NULL;
-	mb();
-
-	fe_thread = kthread_run(dvb_frontend_thread, fe,
-		"kdvb-ad-%i-fe-%i", fe->dvb->num,fe->id);
-	if (IS_ERR(fe_thread)) {
-		ret = PTR_ERR(fe_thread);
-		printk("dvb_frontend_start: failed to start kthread (%d)\n", ret);
-		up(&fepriv->sem);
-		return ret;
-	}
-	fepriv->thread = fe_thread;
-	return 0;
-}
-
-static void dvb_frontend_get_frequency_limits(struct dvb_frontend *fe,
-					u32 *freq_min, u32 *freq_max)
-{
-	*freq_min = max(fe->ops.info.frequency_min, fe->ops.tuner_ops.info.frequency_min);
-
-	if (fe->ops.info.frequency_max == 0)
-		*freq_max = fe->ops.tuner_ops.info.frequency_max;
-	else if (fe->ops.tuner_ops.info.frequency_max == 0)
-		*freq_max = fe->ops.info.frequency_max;
-	else
-		*freq_max = min(fe->ops.info.frequency_max, fe->ops.tuner_ops.info.frequency_max);
-
-	if (*freq_min == 0 || *freq_max == 0)
-		printk(KERN_WARNING "DVB: adapter %i frontend %u frequency limits undefined - fix the driver\n",
-		       fe->dvb->num,fe->id);
-}
-
-static int dvb_frontend_check_parameters(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	u32 freq_min;
-	u32 freq_max;
-
-	/* range check: frequency */
-	dvb_frontend_get_frequency_limits(fe, &freq_min, &freq_max);
-	if ((freq_min && c->frequency < freq_min) ||
-	    (freq_max && c->frequency > freq_max)) {
-		printk(KERN_WARNING "DVB: adapter %i frontend %i frequency %u out of range (%u..%u)\n",
-		       fe->dvb->num, fe->id, c->frequency, freq_min, freq_max);
-		return -EINVAL;
-	}
-
-	/* range check: symbol rate */
-	switch (c->delivery_system) {
-	case SYS_DVBS:
-	case SYS_DVBS2:
-	case SYS_TURBO:
-	case SYS_DVBC_ANNEX_A:
-	case SYS_DVBC_ANNEX_C:
-		if ((fe->ops.info.symbol_rate_min &&
-		     c->symbol_rate < fe->ops.info.symbol_rate_min) ||
-		    (fe->ops.info.symbol_rate_max &&
-		     c->symbol_rate > fe->ops.info.symbol_rate_max)) {
-			printk(KERN_WARNING "DVB: adapter %i frontend %i symbol rate %u out of range (%u..%u)\n",
-			       fe->dvb->num, fe->id, c->symbol_rate,
-			       fe->ops.info.symbol_rate_min,
-			       fe->ops.info.symbol_rate_max);
-			return -EINVAL;
-		}
-	default:
-		break;
-	}
-
-	return 0;
-}
-
-static int dvb_frontend_clear_cache(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	int i;
-	u32 delsys;
-
-	delsys = c->delivery_system;
-	memset(c, 0, sizeof(struct dtv_frontend_properties));
-	c->delivery_system = delsys;
-
-	c->state = DTV_CLEAR;
-
-	dprintk("%s() Clearing cache for delivery system %d\n", __func__,
-		c->delivery_system);
-
-	c->transmission_mode = TRANSMISSION_MODE_AUTO;
-	c->bandwidth_hz = 0;	/* AUTO */
-	c->guard_interval = GUARD_INTERVAL_AUTO;
-	c->hierarchy = HIERARCHY_AUTO;
-	c->symbol_rate = 0;
-	c->code_rate_HP = FEC_AUTO;
-	c->code_rate_LP = FEC_AUTO;
-	c->fec_inner = FEC_AUTO;
-	c->rolloff = ROLLOFF_AUTO;
-	c->voltage = SEC_VOLTAGE_OFF;
-	c->sectone = SEC_TONE_OFF;
-	c->pilot = PILOT_AUTO;
-
-	c->isdbt_partial_reception = 0;
-	c->isdbt_sb_mode = 0;
-	c->isdbt_sb_subchannel = 0;
-	c->isdbt_sb_segment_idx = 0;
-	c->isdbt_sb_segment_count = 0;
-	c->isdbt_layer_enabled = 0;
-	for (i = 0; i < 3; i++) {
-		c->layer[i].fec = FEC_AUTO;
-		c->layer[i].modulation = QAM_AUTO;
-		c->layer[i].interleaving = 0;
-		c->layer[i].segment_count = 0;
-	}
-
-	c->isdbs_ts_id = 0;
-	c->dvbt2_plp_id = 0;
-
-	switch (c->delivery_system) {
-	case SYS_DVBS:
-	case SYS_DVBS2:
-	case SYS_TURBO:
-		c->modulation = QPSK;   /* implied for DVB-S in legacy API */
-		c->rolloff = ROLLOFF_35;/* implied for DVB-S */
-		break;
-	case SYS_ATSC:
-		c->modulation = VSB_8;
-		break;
-	default:
-		c->modulation = QAM_AUTO;
-		break;
-	}
-
-	return 0;
-}
-
-#define _DTV_CMD(n, s, b) \
-[n] = { \
-	.name = #n, \
-	.cmd  = n, \
-	.set  = s,\
-	.buffer = b \
-}
-
-static struct dtv_cmds_h dtv_cmds[DTV_MAX_COMMAND + 1] = {
-	_DTV_CMD(DTV_TUNE, 1, 0),
-	_DTV_CMD(DTV_CLEAR, 1, 0),
-
-	/* Set */
-	_DTV_CMD(DTV_FREQUENCY, 1, 0),
-	_DTV_CMD(DTV_BANDWIDTH_HZ, 1, 0),
-	_DTV_CMD(DTV_MODULATION, 1, 0),
-	_DTV_CMD(DTV_INVERSION, 1, 0),
-	_DTV_CMD(DTV_DISEQC_MASTER, 1, 1),
-	_DTV_CMD(DTV_SYMBOL_RATE, 1, 0),
-	_DTV_CMD(DTV_INNER_FEC, 1, 0),
-	_DTV_CMD(DTV_VOLTAGE, 1, 0),
-	_DTV_CMD(DTV_TONE, 1, 0),
-	_DTV_CMD(DTV_PILOT, 1, 0),
-	_DTV_CMD(DTV_ROLLOFF, 1, 0),
-	_DTV_CMD(DTV_DELIVERY_SYSTEM, 1, 0),
-	_DTV_CMD(DTV_HIERARCHY, 1, 0),
-	_DTV_CMD(DTV_CODE_RATE_HP, 1, 0),
-	_DTV_CMD(DTV_CODE_RATE_LP, 1, 0),
-	_DTV_CMD(DTV_GUARD_INTERVAL, 1, 0),
-	_DTV_CMD(DTV_TRANSMISSION_MODE, 1, 0),
-
-	_DTV_CMD(DTV_ISDBT_PARTIAL_RECEPTION, 1, 0),
-	_DTV_CMD(DTV_ISDBT_SOUND_BROADCASTING, 1, 0),
-	_DTV_CMD(DTV_ISDBT_SB_SUBCHANNEL_ID, 1, 0),
-	_DTV_CMD(DTV_ISDBT_SB_SEGMENT_IDX, 1, 0),
-	_DTV_CMD(DTV_ISDBT_SB_SEGMENT_COUNT, 1, 0),
-	_DTV_CMD(DTV_ISDBT_LAYER_ENABLED, 1, 0),
-	_DTV_CMD(DTV_ISDBT_LAYERA_FEC, 1, 0),
-	_DTV_CMD(DTV_ISDBT_LAYERA_MODULATION, 1, 0),
-	_DTV_CMD(DTV_ISDBT_LAYERA_SEGMENT_COUNT, 1, 0),
-	_DTV_CMD(DTV_ISDBT_LAYERA_TIME_INTERLEAVING, 1, 0),
-	_DTV_CMD(DTV_ISDBT_LAYERB_FEC, 1, 0),
-	_DTV_CMD(DTV_ISDBT_LAYERB_MODULATION, 1, 0),
-	_DTV_CMD(DTV_ISDBT_LAYERB_SEGMENT_COUNT, 1, 0),
-	_DTV_CMD(DTV_ISDBT_LAYERB_TIME_INTERLEAVING, 1, 0),
-	_DTV_CMD(DTV_ISDBT_LAYERC_FEC, 1, 0),
-	_DTV_CMD(DTV_ISDBT_LAYERC_MODULATION, 1, 0),
-	_DTV_CMD(DTV_ISDBT_LAYERC_SEGMENT_COUNT, 1, 0),
-	_DTV_CMD(DTV_ISDBT_LAYERC_TIME_INTERLEAVING, 1, 0),
-
-	_DTV_CMD(DTV_ISDBS_TS_ID, 1, 0),
-	_DTV_CMD(DTV_DVBT2_PLP_ID, 1, 0),
-
-	/* Get */
-	_DTV_CMD(DTV_DISEQC_SLAVE_REPLY, 0, 1),
-	_DTV_CMD(DTV_API_VERSION, 0, 0),
-	_DTV_CMD(DTV_CODE_RATE_HP, 0, 0),
-	_DTV_CMD(DTV_CODE_RATE_LP, 0, 0),
-	_DTV_CMD(DTV_GUARD_INTERVAL, 0, 0),
-	_DTV_CMD(DTV_TRANSMISSION_MODE, 0, 0),
-	_DTV_CMD(DTV_HIERARCHY, 0, 0),
-
-	_DTV_CMD(DTV_ENUM_DELSYS, 0, 0),
-
-	_DTV_CMD(DTV_ATSCMH_PARADE_ID, 1, 0),
-	_DTV_CMD(DTV_ATSCMH_RS_FRAME_ENSEMBLE, 1, 0),
-
-	_DTV_CMD(DTV_ATSCMH_FIC_VER, 0, 0),
-	_DTV_CMD(DTV_ATSCMH_PARADE_ID, 0, 0),
-	_DTV_CMD(DTV_ATSCMH_NOG, 0, 0),
-	_DTV_CMD(DTV_ATSCMH_TNOG, 0, 0),
-	_DTV_CMD(DTV_ATSCMH_SGN, 0, 0),
-	_DTV_CMD(DTV_ATSCMH_PRC, 0, 0),
-	_DTV_CMD(DTV_ATSCMH_RS_FRAME_MODE, 0, 0),
-	_DTV_CMD(DTV_ATSCMH_RS_FRAME_ENSEMBLE, 0, 0),
-	_DTV_CMD(DTV_ATSCMH_RS_CODE_MODE_PRI, 0, 0),
-	_DTV_CMD(DTV_ATSCMH_RS_CODE_MODE_SEC, 0, 0),
-	_DTV_CMD(DTV_ATSCMH_SCCC_BLOCK_MODE, 0, 0),
-	_DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_A, 0, 0),
-	_DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_B, 0, 0),
-	_DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_C, 0, 0),
-	_DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_D, 0, 0),
-};
-
-static void dtv_property_dump(struct dtv_property *tvp)
-{
-	int i;
-
-	if (tvp->cmd <= 0 || tvp->cmd > DTV_MAX_COMMAND) {
-		printk(KERN_WARNING "%s: tvp.cmd = 0x%08x undefined\n",
-			__func__, tvp->cmd);
-		return;
-	}
-
-	dprintk("%s() tvp.cmd    = 0x%08x (%s)\n"
-		,__func__
-		,tvp->cmd
-		,dtv_cmds[ tvp->cmd ].name);
-
-	if(dtv_cmds[ tvp->cmd ].buffer) {
-
-		dprintk("%s() tvp.u.buffer.len = 0x%02x\n"
-			,__func__
-			,tvp->u.buffer.len);
-
-		for(i = 0; i < tvp->u.buffer.len; i++)
-			dprintk("%s() tvp.u.buffer.data[0x%02x] = 0x%02x\n"
-				,__func__
-				,i
-				,tvp->u.buffer.data[i]);
-
-	} else
-		dprintk("%s() tvp.u.data = 0x%08x\n", __func__, tvp->u.data);
-}
-
-/* Synchronise the legacy tuning parameters into the cache, so that demodulator
- * drivers can use a single set_frontend tuning function, regardless of whether
- * it's being used for the legacy or new API, reducing code and complexity.
- */
-static int dtv_property_cache_sync(struct dvb_frontend *fe,
-				   struct dtv_frontend_properties *c,
-				   const struct dvb_frontend_parameters *p)
-{
-	c->frequency = p->frequency;
-	c->inversion = p->inversion;
-
-	switch (dvbv3_type(c->delivery_system)) {
-	case DVBV3_QPSK:
-		dprintk("%s() Preparing QPSK req\n", __func__);
-		c->symbol_rate = p->u.qpsk.symbol_rate;
-		c->fec_inner = p->u.qpsk.fec_inner;
-		break;
-	case DVBV3_QAM:
-		dprintk("%s() Preparing QAM req\n", __func__);
-		c->symbol_rate = p->u.qam.symbol_rate;
-		c->fec_inner = p->u.qam.fec_inner;
-		c->modulation = p->u.qam.modulation;
-		break;
-	case DVBV3_OFDM:
-		dprintk("%s() Preparing OFDM req\n", __func__);
-		switch (p->u.ofdm.bandwidth) {
-		case BANDWIDTH_10_MHZ:
-			c->bandwidth_hz = 10000000;
-			break;
-		case BANDWIDTH_8_MHZ:
-			c->bandwidth_hz = 8000000;
-			break;
-		case BANDWIDTH_7_MHZ:
-			c->bandwidth_hz = 7000000;
-			break;
-		case BANDWIDTH_6_MHZ:
-			c->bandwidth_hz = 6000000;
-			break;
-		case BANDWIDTH_5_MHZ:
-			c->bandwidth_hz = 5000000;
-			break;
-		case BANDWIDTH_1_712_MHZ:
-			c->bandwidth_hz = 1712000;
-			break;
-		case BANDWIDTH_AUTO:
-			c->bandwidth_hz = 0;
-		}
-
-		c->code_rate_HP = p->u.ofdm.code_rate_HP;
-		c->code_rate_LP = p->u.ofdm.code_rate_LP;
-		c->modulation = p->u.ofdm.constellation;
-		c->transmission_mode = p->u.ofdm.transmission_mode;
-		c->guard_interval = p->u.ofdm.guard_interval;
-		c->hierarchy = p->u.ofdm.hierarchy_information;
-		break;
-	case DVBV3_ATSC:
-		dprintk("%s() Preparing ATSC req\n", __func__);
-		c->modulation = p->u.vsb.modulation;
-		if (c->delivery_system == SYS_ATSCMH)
-			break;
-		if ((c->modulation == VSB_8) || (c->modulation == VSB_16))
-			c->delivery_system = SYS_ATSC;
-		else
-			c->delivery_system = SYS_DVBC_ANNEX_B;
-		break;
-	case DVBV3_UNKNOWN:
-		printk(KERN_ERR
-		       "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n",
-		       __func__, c->delivery_system);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/* Ensure the cached values are set correctly in the frontend
- * legacy tuning structures, for the advanced tuning API.
- */
-static int dtv_property_legacy_params_sync(struct dvb_frontend *fe,
-					    struct dvb_frontend_parameters *p)
-{
-	const struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-
-	p->frequency = c->frequency;
-	p->inversion = c->inversion;
-
-	switch (dvbv3_type(c->delivery_system)) {
-	case DVBV3_UNKNOWN:
-		printk(KERN_ERR
-		       "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n",
-		       __func__, c->delivery_system);
-		return -EINVAL;
-	case DVBV3_QPSK:
-		dprintk("%s() Preparing QPSK req\n", __func__);
-		p->u.qpsk.symbol_rate = c->symbol_rate;
-		p->u.qpsk.fec_inner = c->fec_inner;
-		break;
-	case DVBV3_QAM:
-		dprintk("%s() Preparing QAM req\n", __func__);
-		p->u.qam.symbol_rate = c->symbol_rate;
-		p->u.qam.fec_inner = c->fec_inner;
-		p->u.qam.modulation = c->modulation;
-		break;
-	case DVBV3_OFDM:
-		dprintk("%s() Preparing OFDM req\n", __func__);
-
-		switch (c->bandwidth_hz) {
-		case 10000000:
-			p->u.ofdm.bandwidth = BANDWIDTH_10_MHZ;
-			break;
-		case 8000000:
-			p->u.ofdm.bandwidth = BANDWIDTH_8_MHZ;
-			break;
-		case 7000000:
-			p->u.ofdm.bandwidth = BANDWIDTH_7_MHZ;
-			break;
-		case 6000000:
-			p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ;
-			break;
-		case 5000000:
-			p->u.ofdm.bandwidth = BANDWIDTH_5_MHZ;
-			break;
-		case 1712000:
-			p->u.ofdm.bandwidth = BANDWIDTH_1_712_MHZ;
-			break;
-		case 0:
-		default:
-			p->u.ofdm.bandwidth = BANDWIDTH_AUTO;
-		}
-		p->u.ofdm.code_rate_HP = c->code_rate_HP;
-		p->u.ofdm.code_rate_LP = c->code_rate_LP;
-		p->u.ofdm.constellation = c->modulation;
-		p->u.ofdm.transmission_mode = c->transmission_mode;
-		p->u.ofdm.guard_interval = c->guard_interval;
-		p->u.ofdm.hierarchy_information = c->hierarchy;
-		break;
-	case DVBV3_ATSC:
-		dprintk("%s() Preparing VSB req\n", __func__);
-		p->u.vsb.modulation = c->modulation;
-		break;
-	}
-	return 0;
-}
-
-/**
- * dtv_get_frontend - calls a callback for retrieving DTV parameters
- * @fe:		struct dvb_frontend pointer
- * @c:		struct dtv_frontend_properties pointer (DVBv5 cache)
- * @p_out	struct dvb_frontend_parameters pointer (DVBv3 FE struct)
- *
- * This routine calls either the DVBv3 or DVBv5 get_frontend call.
- * If c is not null, it will update the DVBv5 cache struct pointed by it.
- * If p_out is not null, it will update the DVBv3 params pointed by it.
- */
-static int dtv_get_frontend(struct dvb_frontend *fe,
-			    struct dvb_frontend_parameters *p_out)
-{
-	int r;
-
-	if (fe->ops.get_frontend) {
-		r = fe->ops.get_frontend(fe);
-		if (unlikely(r < 0))
-			return r;
-		if (p_out)
-			dtv_property_legacy_params_sync(fe, p_out);
-		return 0;
-	}
-
-	/* As everything is in cache, get_frontend fops are always supported */
-	return 0;
-}
-
-static int dvb_frontend_ioctl_legacy(struct file *file,
-			unsigned int cmd, void *parg);
-static int dvb_frontend_ioctl_properties(struct file *file,
-			unsigned int cmd, void *parg);
-
-static int dtv_property_process_get(struct dvb_frontend *fe,
-				    const struct dtv_frontend_properties *c,
-				    struct dtv_property *tvp,
-				    struct file *file)
-{
-	int r, ncaps;
-
-	switch(tvp->cmd) {
-	case DTV_ENUM_DELSYS:
-		ncaps = 0;
-		while (fe->ops.delsys[ncaps] && ncaps < MAX_DELSYS) {
-			tvp->u.buffer.data[ncaps] = fe->ops.delsys[ncaps];
-			ncaps++;
-		}
-		tvp->u.buffer.len = ncaps;
-		break;
-	case DTV_FREQUENCY:
-		tvp->u.data = c->frequency;
-		break;
-	case DTV_MODULATION:
-		tvp->u.data = c->modulation;
-		break;
-	case DTV_BANDWIDTH_HZ:
-		tvp->u.data = c->bandwidth_hz;
-		break;
-	case DTV_INVERSION:
-		tvp->u.data = c->inversion;
-		break;
-	case DTV_SYMBOL_RATE:
-		tvp->u.data = c->symbol_rate;
-		break;
-	case DTV_INNER_FEC:
-		tvp->u.data = c->fec_inner;
-		break;
-	case DTV_PILOT:
-		tvp->u.data = c->pilot;
-		break;
-	case DTV_ROLLOFF:
-		tvp->u.data = c->rolloff;
-		break;
-	case DTV_DELIVERY_SYSTEM:
-		tvp->u.data = c->delivery_system;
-		break;
-	case DTV_VOLTAGE:
-		tvp->u.data = c->voltage;
-		break;
-	case DTV_TONE:
-		tvp->u.data = c->sectone;
-		break;
-	case DTV_API_VERSION:
-		tvp->u.data = (DVB_API_VERSION << 8) | DVB_API_VERSION_MINOR;
-		break;
-	case DTV_CODE_RATE_HP:
-		tvp->u.data = c->code_rate_HP;
-		break;
-	case DTV_CODE_RATE_LP:
-		tvp->u.data = c->code_rate_LP;
-		break;
-	case DTV_GUARD_INTERVAL:
-		tvp->u.data = c->guard_interval;
-		break;
-	case DTV_TRANSMISSION_MODE:
-		tvp->u.data = c->transmission_mode;
-		break;
-	case DTV_HIERARCHY:
-		tvp->u.data = c->hierarchy;
-		break;
-
-	/* ISDB-T Support here */
-	case DTV_ISDBT_PARTIAL_RECEPTION:
-		tvp->u.data = c->isdbt_partial_reception;
-		break;
-	case DTV_ISDBT_SOUND_BROADCASTING:
-		tvp->u.data = c->isdbt_sb_mode;
-		break;
-	case DTV_ISDBT_SB_SUBCHANNEL_ID:
-		tvp->u.data = c->isdbt_sb_subchannel;
-		break;
-	case DTV_ISDBT_SB_SEGMENT_IDX:
-		tvp->u.data = c->isdbt_sb_segment_idx;
-		break;
-	case DTV_ISDBT_SB_SEGMENT_COUNT:
-		tvp->u.data = c->isdbt_sb_segment_count;
-		break;
-	case DTV_ISDBT_LAYER_ENABLED:
-		tvp->u.data = c->isdbt_layer_enabled;
-		break;
-	case DTV_ISDBT_LAYERA_FEC:
-		tvp->u.data = c->layer[0].fec;
-		break;
-	case DTV_ISDBT_LAYERA_MODULATION:
-		tvp->u.data = c->layer[0].modulation;
-		break;
-	case DTV_ISDBT_LAYERA_SEGMENT_COUNT:
-		tvp->u.data = c->layer[0].segment_count;
-		break;
-	case DTV_ISDBT_LAYERA_TIME_INTERLEAVING:
-		tvp->u.data = c->layer[0].interleaving;
-		break;
-	case DTV_ISDBT_LAYERB_FEC:
-		tvp->u.data = c->layer[1].fec;
-		break;
-	case DTV_ISDBT_LAYERB_MODULATION:
-		tvp->u.data = c->layer[1].modulation;
-		break;
-	case DTV_ISDBT_LAYERB_SEGMENT_COUNT:
-		tvp->u.data = c->layer[1].segment_count;
-		break;
-	case DTV_ISDBT_LAYERB_TIME_INTERLEAVING:
-		tvp->u.data = c->layer[1].interleaving;
-		break;
-	case DTV_ISDBT_LAYERC_FEC:
-		tvp->u.data = c->layer[2].fec;
-		break;
-	case DTV_ISDBT_LAYERC_MODULATION:
-		tvp->u.data = c->layer[2].modulation;
-		break;
-	case DTV_ISDBT_LAYERC_SEGMENT_COUNT:
-		tvp->u.data = c->layer[2].segment_count;
-		break;
-	case DTV_ISDBT_LAYERC_TIME_INTERLEAVING:
-		tvp->u.data = c->layer[2].interleaving;
-		break;
-	case DTV_ISDBS_TS_ID:
-		tvp->u.data = c->isdbs_ts_id;
-		break;
-	case DTV_DVBT2_PLP_ID:
-		tvp->u.data = c->dvbt2_plp_id;
-		break;
-
-	/* ATSC-MH */
-	case DTV_ATSCMH_FIC_VER:
-		tvp->u.data = fe->dtv_property_cache.atscmh_fic_ver;
-		break;
-	case DTV_ATSCMH_PARADE_ID:
-		tvp->u.data = fe->dtv_property_cache.atscmh_parade_id;
-		break;
-	case DTV_ATSCMH_NOG:
-		tvp->u.data = fe->dtv_property_cache.atscmh_nog;
-		break;
-	case DTV_ATSCMH_TNOG:
-		tvp->u.data = fe->dtv_property_cache.atscmh_tnog;
-		break;
-	case DTV_ATSCMH_SGN:
-		tvp->u.data = fe->dtv_property_cache.atscmh_sgn;
-		break;
-	case DTV_ATSCMH_PRC:
-		tvp->u.data = fe->dtv_property_cache.atscmh_prc;
-		break;
-	case DTV_ATSCMH_RS_FRAME_MODE:
-		tvp->u.data = fe->dtv_property_cache.atscmh_rs_frame_mode;
-		break;
-	case DTV_ATSCMH_RS_FRAME_ENSEMBLE:
-		tvp->u.data = fe->dtv_property_cache.atscmh_rs_frame_ensemble;
-		break;
-	case DTV_ATSCMH_RS_CODE_MODE_PRI:
-		tvp->u.data = fe->dtv_property_cache.atscmh_rs_code_mode_pri;
-		break;
-	case DTV_ATSCMH_RS_CODE_MODE_SEC:
-		tvp->u.data = fe->dtv_property_cache.atscmh_rs_code_mode_sec;
-		break;
-	case DTV_ATSCMH_SCCC_BLOCK_MODE:
-		tvp->u.data = fe->dtv_property_cache.atscmh_sccc_block_mode;
-		break;
-	case DTV_ATSCMH_SCCC_CODE_MODE_A:
-		tvp->u.data = fe->dtv_property_cache.atscmh_sccc_code_mode_a;
-		break;
-	case DTV_ATSCMH_SCCC_CODE_MODE_B:
-		tvp->u.data = fe->dtv_property_cache.atscmh_sccc_code_mode_b;
-		break;
-	case DTV_ATSCMH_SCCC_CODE_MODE_C:
-		tvp->u.data = fe->dtv_property_cache.atscmh_sccc_code_mode_c;
-		break;
-	case DTV_ATSCMH_SCCC_CODE_MODE_D:
-		tvp->u.data = fe->dtv_property_cache.atscmh_sccc_code_mode_d;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	/* Allow the frontend to override outgoing properties */
-	if (fe->ops.get_property) {
-		r = fe->ops.get_property(fe, tvp);
-		if (r < 0)
-			return r;
-	}
-
-	dtv_property_dump(tvp);
-
-	return 0;
-}
-
-static int dtv_set_frontend(struct dvb_frontend *fe);
-
-static bool is_dvbv3_delsys(u32 delsys)
-{
-	bool status;
-
-	status = (delsys == SYS_DVBT) || (delsys == SYS_DVBC_ANNEX_A) ||
-		 (delsys == SYS_DVBS) || (delsys == SYS_ATSC);
-
-	return status;
-}
-
-static int set_delivery_system(struct dvb_frontend *fe, u32 desired_system)
-{
-	int ncaps, i;
-	u32 delsys = SYS_UNDEFINED;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	enum dvbv3_emulation_type type;
-
-	/*
-	 * It was reported that some old DVBv5 applications were
-	 * filling delivery_system with SYS_UNDEFINED. If this happens,
-	 * assume that the application wants to use the first supported
-	 * delivery system.
-	 */
-	if (c->delivery_system == SYS_UNDEFINED)
-	        c->delivery_system = fe->ops.delsys[0];
-
-	if (desired_system == SYS_UNDEFINED) {
-		/*
-		 * A DVBv3 call doesn't know what's the desired system.
-		 * Also, DVBv3 applications don't know that ops.info->type
-		 * could be changed, and they simply dies when it doesn't
-		 * match.
-		 * So, don't change the current delivery system, as it
-		 * may be trying to do the wrong thing, like setting an
-		 * ISDB-T frontend as DVB-T. Instead, find the closest
-		 * DVBv3 system that matches the delivery system.
-		 */
-		if (is_dvbv3_delsys(c->delivery_system)) {
-			dprintk("%s() Using delivery system to %d\n",
-				__func__, c->delivery_system);
-			return 0;
-		}
-		type = dvbv3_type(c->delivery_system);
-		switch (type) {
-		case DVBV3_QPSK:
-			desired_system = SYS_DVBS;
-			break;
-		case DVBV3_QAM:
-			desired_system = SYS_DVBC_ANNEX_A;
-			break;
-		case DVBV3_ATSC:
-			desired_system = SYS_ATSC;
-			break;
-		case DVBV3_OFDM:
-			desired_system = SYS_DVBT;
-			break;
-		default:
-			dprintk("%s(): This frontend doesn't support DVBv3 calls\n",
-				__func__);
-			return -EINVAL;
-		}
-		/*
-		 * Get a delivery system that is compatible with DVBv3
-		 * NOTE: in order for this to work with softwares like Kaffeine that
-		 *	uses a DVBv5 call for DVB-S2 and a DVBv3 call to go back to
-		 *	DVB-S, drivers that support both should put the SYS_DVBS entry
-		 *	before the SYS_DVBS2, otherwise it won't switch back to DVB-S.
-		 *	The real fix is that userspace applications should not use DVBv3
-		 *	and not trust on calling FE_SET_FRONTEND to switch the delivery
-		 *	system.
-		 */
-		ncaps = 0;
-		while (fe->ops.delsys[ncaps] && ncaps < MAX_DELSYS) {
-			if (fe->ops.delsys[ncaps] == desired_system) {
-				delsys = desired_system;
-				break;
-			}
-			ncaps++;
-		}
-		if (delsys == SYS_UNDEFINED) {
-			dprintk("%s() Couldn't find a delivery system that matches %d\n",
-				__func__, desired_system);
-		}
-	} else {
-		/*
-		 * This is a DVBv5 call. So, it likely knows the supported
-		 * delivery systems.
-		 */
-
-		/* Check if the desired delivery system is supported */
-		ncaps = 0;
-		while (fe->ops.delsys[ncaps] && ncaps < MAX_DELSYS) {
-			if (fe->ops.delsys[ncaps] == desired_system) {
-				c->delivery_system = desired_system;
-				dprintk("%s() Changing delivery system to %d\n",
-					__func__, desired_system);
-				return 0;
-			}
-			ncaps++;
-		}
-		type = dvbv3_type(desired_system);
-
-		/*
-		 * The delivery system is not supported. See if it can be
-		 * emulated.
-		 * The emulation only works if the desired system is one of the
-		 * DVBv3 delivery systems
-		 */
-		if (!is_dvbv3_delsys(desired_system)) {
-			dprintk("%s() can't use a DVBv3 FE_SET_FRONTEND call on this frontend\n",
-				__func__);
-			return -EINVAL;
-		}
-
-		/*
-		 * Get the last non-DVBv3 delivery system that has the same type
-		 * of the desired system
-		 */
-		ncaps = 0;
-		while (fe->ops.delsys[ncaps] && ncaps < MAX_DELSYS) {
-			if ((dvbv3_type(fe->ops.delsys[ncaps]) == type) &&
-			    !is_dvbv3_delsys(fe->ops.delsys[ncaps]))
-				delsys = fe->ops.delsys[ncaps];
-			ncaps++;
-		}
-		/* There's nothing compatible with the desired delivery system */
-		if (delsys == SYS_UNDEFINED) {
-			dprintk("%s() Incompatible DVBv3 FE_SET_FRONTEND call for this frontend\n",
-				__func__);
-			return -EINVAL;
-		}
-	}
-
-	c->delivery_system = delsys;
-
-	/*
-	 * The DVBv3 or DVBv5 call is requesting a different system. So,
-	 * emulation is needed.
-	 *
-	 * Emulate newer delivery systems like ISDBT, DVBT and DMBTH
-	 * for older DVBv5 applications. The emulation will try to use
-	 * the auto mode for most things, and will assume that the desired
-	 * delivery system is the last one at the ops.delsys[] array
-	 */
-	dprintk("%s() Using delivery system %d emulated as if it were a %d\n",
-		__func__, delsys, desired_system);
-
-	/*
-	 * For now, handles ISDB-T calls. More code may be needed here for the
-	 * other emulated stuff
-	 */
-	if (type == DVBV3_OFDM) {
-		if (c->delivery_system == SYS_ISDBT) {
-			dprintk("%s() Using defaults for SYS_ISDBT\n",
-				__func__);
-			if (!c->bandwidth_hz)
-				c->bandwidth_hz = 6000000;
-
-			c->isdbt_partial_reception = 0;
-			c->isdbt_sb_mode = 0;
-			c->isdbt_sb_subchannel = 0;
-			c->isdbt_sb_segment_idx = 0;
-			c->isdbt_sb_segment_count = 0;
-			c->isdbt_layer_enabled = 0;
-			for (i = 0; i < 3; i++) {
-				c->layer[i].fec = FEC_AUTO;
-				c->layer[i].modulation = QAM_AUTO;
-				c->layer[i].interleaving = 0;
-				c->layer[i].segment_count = 0;
-			}
-		}
-	}
-	dprintk("change delivery system on cache to %d\n", c->delivery_system);
-
-	return 0;
-}
-
-static int dtv_property_process_set(struct dvb_frontend *fe,
-				    struct dtv_property *tvp,
-				    struct file *file)
-{
-	int r = 0;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-
-	/* Allow the frontend to validate incoming properties */
-	if (fe->ops.set_property) {
-		r = fe->ops.set_property(fe, tvp);
-		if (r < 0)
-			return r;
-	}
-
-	switch(tvp->cmd) {
-	case DTV_CLEAR:
-		/*
-		 * Reset a cache of data specific to the frontend here. This does
-		 * not effect hardware.
-		 */
-		dvb_frontend_clear_cache(fe);
-		break;
-	case DTV_TUNE:
-		/* interpret the cache of data, build either a traditional frontend
-		 * tunerequest so we can pass validation in the FE_SET_FRONTEND
-		 * ioctl.
-		 */
-		c->state = tvp->cmd;
-		dprintk("%s() Finalised property cache\n", __func__);
-
-		r = dtv_set_frontend(fe);
-		break;
-	case DTV_FREQUENCY:
-		c->frequency = tvp->u.data;
-		break;
-	case DTV_MODULATION:
-		c->modulation = tvp->u.data;
-		break;
-	case DTV_BANDWIDTH_HZ:
-		c->bandwidth_hz = tvp->u.data;
-		break;
-	case DTV_INVERSION:
-		c->inversion = tvp->u.data;
-		break;
-	case DTV_SYMBOL_RATE:
-		c->symbol_rate = tvp->u.data;
-		break;
-	case DTV_INNER_FEC:
-		c->fec_inner = tvp->u.data;
-		break;
-	case DTV_PILOT:
-		c->pilot = tvp->u.data;
-		break;
-	case DTV_ROLLOFF:
-		c->rolloff = tvp->u.data;
-		break;
-	case DTV_DELIVERY_SYSTEM:
-		r = set_delivery_system(fe, tvp->u.data);
-		break;
-	case DTV_VOLTAGE:
-		c->voltage = tvp->u.data;
-		r = dvb_frontend_ioctl_legacy(file, FE_SET_VOLTAGE,
-			(void *)c->voltage);
-		break;
-	case DTV_TONE:
-		c->sectone = tvp->u.data;
-		r = dvb_frontend_ioctl_legacy(file, FE_SET_TONE,
-			(void *)c->sectone);
-		break;
-	case DTV_CODE_RATE_HP:
-		c->code_rate_HP = tvp->u.data;
-		break;
-	case DTV_CODE_RATE_LP:
-		c->code_rate_LP = tvp->u.data;
-		break;
-	case DTV_GUARD_INTERVAL:
-		c->guard_interval = tvp->u.data;
-		break;
-	case DTV_TRANSMISSION_MODE:
-		c->transmission_mode = tvp->u.data;
-		break;
-	case DTV_HIERARCHY:
-		c->hierarchy = tvp->u.data;
-		break;
-
-	/* ISDB-T Support here */
-	case DTV_ISDBT_PARTIAL_RECEPTION:
-		c->isdbt_partial_reception = tvp->u.data;
-		break;
-	case DTV_ISDBT_SOUND_BROADCASTING:
-		c->isdbt_sb_mode = tvp->u.data;
-		break;
-	case DTV_ISDBT_SB_SUBCHANNEL_ID:
-		c->isdbt_sb_subchannel = tvp->u.data;
-		break;
-	case DTV_ISDBT_SB_SEGMENT_IDX:
-		c->isdbt_sb_segment_idx = tvp->u.data;
-		break;
-	case DTV_ISDBT_SB_SEGMENT_COUNT:
-		c->isdbt_sb_segment_count = tvp->u.data;
-		break;
-	case DTV_ISDBT_LAYER_ENABLED:
-		c->isdbt_layer_enabled = tvp->u.data;
-		break;
-	case DTV_ISDBT_LAYERA_FEC:
-		c->layer[0].fec = tvp->u.data;
-		break;
-	case DTV_ISDBT_LAYERA_MODULATION:
-		c->layer[0].modulation = tvp->u.data;
-		break;
-	case DTV_ISDBT_LAYERA_SEGMENT_COUNT:
-		c->layer[0].segment_count = tvp->u.data;
-		break;
-	case DTV_ISDBT_LAYERA_TIME_INTERLEAVING:
-		c->layer[0].interleaving = tvp->u.data;
-		break;
-	case DTV_ISDBT_LAYERB_FEC:
-		c->layer[1].fec = tvp->u.data;
-		break;
-	case DTV_ISDBT_LAYERB_MODULATION:
-		c->layer[1].modulation = tvp->u.data;
-		break;
-	case DTV_ISDBT_LAYERB_SEGMENT_COUNT:
-		c->layer[1].segment_count = tvp->u.data;
-		break;
-	case DTV_ISDBT_LAYERB_TIME_INTERLEAVING:
-		c->layer[1].interleaving = tvp->u.data;
-		break;
-	case DTV_ISDBT_LAYERC_FEC:
-		c->layer[2].fec = tvp->u.data;
-		break;
-	case DTV_ISDBT_LAYERC_MODULATION:
-		c->layer[2].modulation = tvp->u.data;
-		break;
-	case DTV_ISDBT_LAYERC_SEGMENT_COUNT:
-		c->layer[2].segment_count = tvp->u.data;
-		break;
-	case DTV_ISDBT_LAYERC_TIME_INTERLEAVING:
-		c->layer[2].interleaving = tvp->u.data;
-		break;
-	case DTV_ISDBS_TS_ID:
-		c->isdbs_ts_id = tvp->u.data;
-		break;
-	case DTV_DVBT2_PLP_ID:
-		c->dvbt2_plp_id = tvp->u.data;
-		break;
-
-	/* ATSC-MH */
-	case DTV_ATSCMH_PARADE_ID:
-		fe->dtv_property_cache.atscmh_parade_id = tvp->u.data;
-		break;
-	case DTV_ATSCMH_RS_FRAME_ENSEMBLE:
-		fe->dtv_property_cache.atscmh_rs_frame_ensemble = tvp->u.data;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return r;
-}
-
-static int dvb_frontend_ioctl(struct file *file,
-			unsigned int cmd, void *parg)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dvb_frontend *fe = dvbdev->priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct dvb_frontend_private *fepriv = fe->frontend_priv;
-	int err = -EOPNOTSUPP;
-
-	dprintk("%s (%d)\n", __func__, _IOC_NR(cmd));
-
-	if (fepriv->exit != DVB_FE_NO_EXIT)
-		return -ENODEV;
-
-	if ((file->f_flags & O_ACCMODE) == O_RDONLY &&
-	    (_IOC_DIR(cmd) != _IOC_READ || cmd == FE_GET_EVENT ||
-	     cmd == FE_DISEQC_RECV_SLAVE_REPLY))
-		return -EPERM;
-
-	if (down_interruptible (&fepriv->sem))
-		return -ERESTARTSYS;
-
-	if ((cmd == FE_SET_PROPERTY) || (cmd == FE_GET_PROPERTY))
-		err = dvb_frontend_ioctl_properties(file, cmd, parg);
-	else {
-		c->state = DTV_UNDEFINED;
-		err = dvb_frontend_ioctl_legacy(file, cmd, parg);
-	}
-
-	up(&fepriv->sem);
-	return err;
-}
-
-static int dvb_frontend_ioctl_properties(struct file *file,
-			unsigned int cmd, void *parg)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dvb_frontend *fe = dvbdev->priv;
-	struct dvb_frontend_private *fepriv = fe->frontend_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	int err = 0;
-
-	struct dtv_properties *tvps = NULL;
-	struct dtv_property *tvp = NULL;
-	int i;
-
-	dprintk("%s\n", __func__);
-
-	if(cmd == FE_SET_PROPERTY) {
-		tvps = (struct dtv_properties __user *)parg;
-
-		dprintk("%s() properties.num = %d\n", __func__, tvps->num);
-		dprintk("%s() properties.props = %p\n", __func__, tvps->props);
-
-		/* Put an arbitrary limit on the number of messages that can
-		 * be sent at once */
-		if ((tvps->num == 0) || (tvps->num > DTV_IOCTL_MAX_MSGS))
-			return -EINVAL;
-
-		tvp = kmalloc(tvps->num * sizeof(struct dtv_property), GFP_KERNEL);
-		if (!tvp) {
-			err = -ENOMEM;
-			goto out;
-		}
-
-		if (copy_from_user(tvp, tvps->props, tvps->num * sizeof(struct dtv_property))) {
-			err = -EFAULT;
-			goto out;
-		}
-
-		for (i = 0; i < tvps->num; i++) {
-			err = dtv_property_process_set(fe, tvp + i, file);
-			if (err < 0)
-				goto out;
-			(tvp + i)->result = err;
-		}
-
-		if (c->state == DTV_TUNE)
-			dprintk("%s() Property cache is full, tuning\n", __func__);
-
-	} else
-	if(cmd == FE_GET_PROPERTY) {
-		tvps = (struct dtv_properties __user *)parg;
-
-		dprintk("%s() properties.num = %d\n", __func__, tvps->num);
-		dprintk("%s() properties.props = %p\n", __func__, tvps->props);
-
-		/* Put an arbitrary limit on the number of messages that can
-		 * be sent at once */
-		if ((tvps->num == 0) || (tvps->num > DTV_IOCTL_MAX_MSGS))
-			return -EINVAL;
-
-		tvp = kmalloc(tvps->num * sizeof(struct dtv_property), GFP_KERNEL);
-		if (!tvp) {
-			err = -ENOMEM;
-			goto out;
-		}
-
-		if (copy_from_user(tvp, tvps->props, tvps->num * sizeof(struct dtv_property))) {
-			err = -EFAULT;
-			goto out;
-		}
-
-		/*
-		 * Fills the cache out struct with the cache contents, plus
-		 * the data retrieved from get_frontend, if the frontend
-		 * is not idle. Otherwise, returns the cached content
-		 */
-		if (fepriv->state != FESTATE_IDLE) {
-			err = dtv_get_frontend(fe, NULL);
-			if (err < 0)
-				goto out;
-		}
-		for (i = 0; i < tvps->num; i++) {
-			err = dtv_property_process_get(fe, c, tvp + i, file);
-			if (err < 0)
-				goto out;
-			(tvp + i)->result = err;
-		}
-
-		if (copy_to_user(tvps->props, tvp, tvps->num * sizeof(struct dtv_property))) {
-			err = -EFAULT;
-			goto out;
-		}
-
-	} else
-		err = -EOPNOTSUPP;
-
-out:
-	kfree(tvp);
-	return err;
-}
-
-static int dtv_set_frontend(struct dvb_frontend *fe)
-{
-	struct dvb_frontend_private *fepriv = fe->frontend_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct dvb_frontend_tune_settings fetunesettings;
-	u32 rolloff = 0;
-
-	if (dvb_frontend_check_parameters(fe) < 0)
-		return -EINVAL;
-
-	/*
-	 * Initialize output parameters to match the values given by
-	 * the user. FE_SET_FRONTEND triggers an initial frontend event
-	 * with status = 0, which copies output parameters to userspace.
-	 */
-	dtv_property_legacy_params_sync(fe, &fepriv->parameters_out);
-
-	/*
-	 * Be sure that the bandwidth will be filled for all
-	 * non-satellite systems, as tuners need to know what
-	 * low pass/Nyquist half filter should be applied, in
-	 * order to avoid inter-channel noise.
-	 *
-	 * ISDB-T and DVB-T/T2 already sets bandwidth.
-	 * ATSC and DVB-C don't set, so, the core should fill it.
-	 *
-	 * On DVB-C Annex A and C, the bandwidth is a function of
-	 * the roll-off and symbol rate. Annex B defines different
-	 * roll-off factors depending on the modulation. Fortunately,
-	 * Annex B is only used with 6MHz, so there's no need to
-	 * calculate it.
-	 *
-	 * While not officially supported, a side effect of handling it at
-	 * the cache level is that a program could retrieve the bandwidth
-	 * via DTV_BANDWIDTH_HZ, which may be useful for test programs.
-	 */
-	switch (c->delivery_system) {
-	case SYS_ATSC:
-	case SYS_DVBC_ANNEX_B:
-		c->bandwidth_hz = 6000000;
-		break;
-	case SYS_DVBC_ANNEX_A:
-		rolloff = 115;
-		break;
-	case SYS_DVBC_ANNEX_C:
-		rolloff = 113;
-		break;
-	default:
-		break;
-	}
-	if (rolloff)
-		c->bandwidth_hz = (c->symbol_rate * rolloff) / 100;
-
-	/* force auto frequency inversion if requested */
-	if (dvb_force_auto_inversion)
-		c->inversion = INVERSION_AUTO;
-
-	/*
-	 * without hierarchical coding code_rate_LP is irrelevant,
-	 * so we tolerate the otherwise invalid FEC_NONE setting
-	 */
-	if (c->hierarchy == HIERARCHY_NONE && c->code_rate_LP == FEC_NONE)
-		c->code_rate_LP = FEC_AUTO;
-
-	/* get frontend-specific tuning settings */
-	memset(&fetunesettings, 0, sizeof(struct dvb_frontend_tune_settings));
-	if (fe->ops.get_tune_settings && (fe->ops.get_tune_settings(fe, &fetunesettings) == 0)) {
-		fepriv->min_delay = (fetunesettings.min_delay_ms * HZ) / 1000;
-		fepriv->max_drift = fetunesettings.max_drift;
-		fepriv->step_size = fetunesettings.step_size;
-	} else {
-		/* default values */
-		switch (c->delivery_system) {
-		case SYS_DVBS:
-		case SYS_DVBS2:
-		case SYS_ISDBS:
-		case SYS_TURBO:
-		case SYS_DVBC_ANNEX_A:
-		case SYS_DVBC_ANNEX_C:
-			fepriv->min_delay = HZ / 20;
-			fepriv->step_size = c->symbol_rate / 16000;
-			fepriv->max_drift = c->symbol_rate / 2000;
-			break;
-		case SYS_DVBT:
-		case SYS_DVBT2:
-		case SYS_ISDBT:
-		case SYS_DMBTH:
-			fepriv->min_delay = HZ / 20;
-			fepriv->step_size = fe->ops.info.frequency_stepsize * 2;
-			fepriv->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1;
-			break;
-		default:
-			/*
-			 * FIXME: This sounds wrong! if freqency_stepsize is
-			 * defined by the frontend, why not use it???
-			 */
-			fepriv->min_delay = HZ / 20;
-			fepriv->step_size = 0; /* no zigzag */
-			fepriv->max_drift = 0;
-			break;
-		}
-	}
-	if (dvb_override_tune_delay > 0)
-		fepriv->min_delay = (dvb_override_tune_delay * HZ) / 1000;
-
-	fepriv->state = FESTATE_RETUNE;
-
-	/* Request the search algorithm to search */
-	fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN;
-
-	dvb_frontend_clear_events(fe);
-	dvb_frontend_add_event(fe, 0);
-	dvb_frontend_wakeup(fe);
-	fepriv->status = 0;
-
-	return 0;
-}
-
-
-static int dvb_frontend_ioctl_legacy(struct file *file,
-			unsigned int cmd, void *parg)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dvb_frontend *fe = dvbdev->priv;
-	struct dvb_frontend_private *fepriv = fe->frontend_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	int cb_err, err = -EOPNOTSUPP;
-
-	if (fe->dvb->fe_ioctl_override) {
-		cb_err = fe->dvb->fe_ioctl_override(fe, cmd, parg,
-						    DVB_FE_IOCTL_PRE);
-		if (cb_err < 0)
-			return cb_err;
-		if (cb_err > 0)
-			return 0;
-		/* fe_ioctl_override returning 0 allows
-		 * dvb-core to continue handling the ioctl */
-	}
-
-	switch (cmd) {
-	case FE_GET_INFO: {
-		struct dvb_frontend_info* info = parg;
-
-		memcpy(info, &fe->ops.info, sizeof(struct dvb_frontend_info));
-		dvb_frontend_get_frequency_limits(fe, &info->frequency_min, &info->frequency_max);
-
-		/*
-		 * Associate the 4 delivery systems supported by DVBv3
-		 * API with their DVBv5 counterpart. For the other standards,
-		 * use the closest type, assuming that it would hopefully
-		 * work with a DVBv3 application.
-		 * It should be noticed that, on multi-frontend devices with
-		 * different types (terrestrial and cable, for example),
-		 * a pure DVBv3 application won't be able to use all delivery
-		 * systems. Yet, changing the DVBv5 cache to the other delivery
-		 * system should be enough for making it work.
-		 */
-		switch (dvbv3_type(c->delivery_system)) {
-		case DVBV3_QPSK:
-			info->type = FE_QPSK;
-			break;
-		case DVBV3_ATSC:
-			info->type = FE_ATSC;
-			break;
-		case DVBV3_QAM:
-			info->type = FE_QAM;
-			break;
-		case DVBV3_OFDM:
-			info->type = FE_OFDM;
-			break;
-		default:
-			printk(KERN_ERR
-			       "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n",
-			       __func__, c->delivery_system);
-			fe->ops.info.type = FE_OFDM;
-		}
-		dprintk("current delivery system on cache: %d, V3 type: %d\n",
-			c->delivery_system, fe->ops.info.type);
-
-		/* Force the CAN_INVERSION_AUTO bit on. If the frontend doesn't
-		 * do it, it is done for it. */
-		info->caps |= FE_CAN_INVERSION_AUTO;
-		err = 0;
-		break;
-	}
-
-	case FE_READ_STATUS: {
-		fe_status_t* status = parg;
-
-		/* if retune was requested but hasn't occurred yet, prevent
-		 * that user get signal state from previous tuning */
-		if (fepriv->state == FESTATE_RETUNE ||
-		    fepriv->state == FESTATE_ERROR) {
-			err=0;
-			*status = 0;
-			break;
-		}
-
-		if (fe->ops.read_status)
-			err = fe->ops.read_status(fe, status);
-		break;
-	}
-	case FE_READ_BER:
-		if (fe->ops.read_ber)
-			err = fe->ops.read_ber(fe, (__u32*) parg);
-		break;
-
-	case FE_READ_SIGNAL_STRENGTH:
-		if (fe->ops.read_signal_strength)
-			err = fe->ops.read_signal_strength(fe, (__u16*) parg);
-		break;
-
-	case FE_READ_SNR:
-		if (fe->ops.read_snr)
-			err = fe->ops.read_snr(fe, (__u16*) parg);
-		break;
-
-	case FE_READ_UNCORRECTED_BLOCKS:
-		if (fe->ops.read_ucblocks)
-			err = fe->ops.read_ucblocks(fe, (__u32*) parg);
-		break;
-
-
-	case FE_DISEQC_RESET_OVERLOAD:
-		if (fe->ops.diseqc_reset_overload) {
-			err = fe->ops.diseqc_reset_overload(fe);
-			fepriv->state = FESTATE_DISEQC;
-			fepriv->status = 0;
-		}
-		break;
-
-	case FE_DISEQC_SEND_MASTER_CMD:
-		if (fe->ops.diseqc_send_master_cmd) {
-			err = fe->ops.diseqc_send_master_cmd(fe, (struct dvb_diseqc_master_cmd*) parg);
-			fepriv->state = FESTATE_DISEQC;
-			fepriv->status = 0;
-		}
-		break;
-
-	case FE_DISEQC_SEND_BURST:
-		if (fe->ops.diseqc_send_burst) {
-			err = fe->ops.diseqc_send_burst(fe, (fe_sec_mini_cmd_t) parg);
-			fepriv->state = FESTATE_DISEQC;
-			fepriv->status = 0;
-		}
-		break;
-
-	case FE_SET_TONE:
-		if (fe->ops.set_tone) {
-			err = fe->ops.set_tone(fe, (fe_sec_tone_mode_t) parg);
-			fepriv->tone = (fe_sec_tone_mode_t) parg;
-			fepriv->state = FESTATE_DISEQC;
-			fepriv->status = 0;
-		}
-		break;
-
-	case FE_SET_VOLTAGE:
-		if (fe->ops.set_voltage) {
-			err = fe->ops.set_voltage(fe, (fe_sec_voltage_t) parg);
-			fepriv->voltage = (fe_sec_voltage_t) parg;
-			fepriv->state = FESTATE_DISEQC;
-			fepriv->status = 0;
-		}
-		break;
-
-	case FE_DISHNETWORK_SEND_LEGACY_CMD:
-		if (fe->ops.dishnetwork_send_legacy_command) {
-			err = fe->ops.dishnetwork_send_legacy_command(fe, (unsigned long) parg);
-			fepriv->state = FESTATE_DISEQC;
-			fepriv->status = 0;
-		} else if (fe->ops.set_voltage) {
-			/*
-			 * NOTE: This is a fallback condition.  Some frontends
-			 * (stv0299 for instance) take longer than 8msec to
-			 * respond to a set_voltage command.  Those switches
-			 * need custom routines to switch properly.  For all
-			 * other frontends, the following should work ok.
-			 * Dish network legacy switches (as used by Dish500)
-			 * are controlled by sending 9-bit command words
-			 * spaced 8msec apart.
-			 * the actual command word is switch/port dependent
-			 * so it is up to the userspace application to send
-			 * the right command.
-			 * The command must always start with a '0' after
-			 * initialization, so parg is 8 bits and does not
-			 * include the initialization or start bit
-			 */
-			unsigned long swcmd = ((unsigned long) parg) << 1;
-			struct timeval nexttime;
-			struct timeval tv[10];
-			int i;
-			u8 last = 1;
-			if (dvb_frontend_debug)
-				printk("%s switch command: 0x%04lx\n", __func__, swcmd);
-			do_gettimeofday(&nexttime);
-			if (dvb_frontend_debug)
-				memcpy(&tv[0], &nexttime, sizeof(struct timeval));
-			/* before sending a command, initialize by sending
-			 * a 32ms 18V to the switch
-			 */
-			fe->ops.set_voltage(fe, SEC_VOLTAGE_18);
-			dvb_frontend_sleep_until(&nexttime, 32000);
-
-			for (i = 0; i < 9; i++) {
-				if (dvb_frontend_debug)
-					do_gettimeofday(&tv[i + 1]);
-				if ((swcmd & 0x01) != last) {
-					/* set voltage to (last ? 13V : 18V) */
-					fe->ops.set_voltage(fe, (last) ? SEC_VOLTAGE_13 : SEC_VOLTAGE_18);
-					last = (last) ? 0 : 1;
-				}
-				swcmd = swcmd >> 1;
-				if (i != 8)
-					dvb_frontend_sleep_until(&nexttime, 8000);
-			}
-			if (dvb_frontend_debug) {
-				printk("%s(%d): switch delay (should be 32k followed by all 8k\n",
-					__func__, fe->dvb->num);
-				for (i = 1; i < 10; i++)
-					printk("%d: %d\n", i, timeval_usec_diff(tv[i-1] , tv[i]));
-			}
-			err = 0;
-			fepriv->state = FESTATE_DISEQC;
-			fepriv->status = 0;
-		}
-		break;
-
-	case FE_DISEQC_RECV_SLAVE_REPLY:
-		if (fe->ops.diseqc_recv_slave_reply)
-			err = fe->ops.diseqc_recv_slave_reply(fe, (struct dvb_diseqc_slave_reply*) parg);
-		break;
-
-	case FE_ENABLE_HIGH_LNB_VOLTAGE:
-		if (fe->ops.enable_high_lnb_voltage)
-			err = fe->ops.enable_high_lnb_voltage(fe, (long) parg);
-		break;
-
-	case FE_SET_FRONTEND:
-		err = set_delivery_system(fe, SYS_UNDEFINED);
-		if (err)
-			break;
-
-		err = dtv_property_cache_sync(fe, c, parg);
-		if (err)
-			break;
-		err = dtv_set_frontend(fe);
-		break;
-	case FE_GET_EVENT:
-		err = dvb_frontend_get_event (fe, parg, file->f_flags);
-		break;
-
-	case FE_GET_FRONTEND:
-		err = dtv_get_frontend(fe, parg);
-		break;
-
-	case FE_SET_FRONTEND_TUNE_MODE:
-		fepriv->tune_mode_flags = (unsigned long) parg;
-		err = 0;
-		break;
-	};
-
-	if (fe->dvb->fe_ioctl_override) {
-		cb_err = fe->dvb->fe_ioctl_override(fe, cmd, parg,
-						    DVB_FE_IOCTL_POST);
-		if (cb_err < 0)
-			return cb_err;
-	}
-
-	return err;
-}
-
-
-static unsigned int dvb_frontend_poll(struct file *file, struct poll_table_struct *wait)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dvb_frontend *fe = dvbdev->priv;
-	struct dvb_frontend_private *fepriv = fe->frontend_priv;
-
-	dprintk ("%s\n", __func__);
-
-	poll_wait (file, &fepriv->events.wait_queue, wait);
-
-	if (fepriv->events.eventw != fepriv->events.eventr)
-		return (POLLIN | POLLRDNORM | POLLPRI);
-
-	return 0;
-}
-
-static int dvb_frontend_open(struct inode *inode, struct file *file)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dvb_frontend *fe = dvbdev->priv;
-	struct dvb_frontend_private *fepriv = fe->frontend_priv;
-	struct dvb_adapter *adapter = fe->dvb;
-	int ret;
-
-	dprintk ("%s\n", __func__);
-	if (fepriv->exit == DVB_FE_DEVICE_REMOVED)
-		return -ENODEV;
-
-	if (adapter->mfe_shared) {
-		mutex_lock (&adapter->mfe_lock);
-
-		if (adapter->mfe_dvbdev == NULL)
-			adapter->mfe_dvbdev = dvbdev;
-
-		else if (adapter->mfe_dvbdev != dvbdev) {
-			struct dvb_device
-				*mfedev = adapter->mfe_dvbdev;
-			struct dvb_frontend
-				*mfe = mfedev->priv;
-			struct dvb_frontend_private
-				*mfepriv = mfe->frontend_priv;
-			int mferetry = (dvb_mfe_wait_time << 1);
-
-			mutex_unlock (&adapter->mfe_lock);
-			while (mferetry-- && (mfedev->users != -1 ||
-					mfepriv->thread != NULL)) {
-				if(msleep_interruptible(500)) {
-					if(signal_pending(current))
-						return -EINTR;
-				}
-			}
-
-			mutex_lock (&adapter->mfe_lock);
-			if(adapter->mfe_dvbdev != dvbdev) {
-				mfedev = adapter->mfe_dvbdev;
-				mfe = mfedev->priv;
-				mfepriv = mfe->frontend_priv;
-				if (mfedev->users != -1 ||
-						mfepriv->thread != NULL) {
-					mutex_unlock (&adapter->mfe_lock);
-					return -EBUSY;
-				}
-				adapter->mfe_dvbdev = dvbdev;
-			}
-		}
-	}
-
-	if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl) {
-		if ((ret = fe->ops.ts_bus_ctrl(fe, 1)) < 0)
-			goto err0;
-
-		/* If we took control of the bus, we need to force
-		   reinitialization.  This is because many ts_bus_ctrl()
-		   functions strobe the RESET pin on the demod, and if the
-		   frontend thread already exists then the dvb_init() routine
-		   won't get called (which is what usually does initial
-		   register configuration). */
-		fepriv->reinitialise = 1;
-	}
-
-	if ((ret = dvb_generic_open (inode, file)) < 0)
-		goto err1;
-
-	if ((file->f_flags & O_ACCMODE) != O_RDONLY) {
-		/* normal tune mode when opened R/W */
-		fepriv->tune_mode_flags &= ~FE_TUNE_MODE_ONESHOT;
-		fepriv->tone = -1;
-		fepriv->voltage = -1;
-
-		ret = dvb_frontend_start (fe);
-		if (ret)
-			goto err2;
-
-		/*  empty event queue */
-		fepriv->events.eventr = fepriv->events.eventw = 0;
-	}
-
-	if (adapter->mfe_shared)
-		mutex_unlock (&adapter->mfe_lock);
-	return ret;
-
-err2:
-	dvb_generic_release(inode, file);
-err1:
-	if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl)
-		fe->ops.ts_bus_ctrl(fe, 0);
-err0:
-	if (adapter->mfe_shared)
-		mutex_unlock (&adapter->mfe_lock);
-	return ret;
-}
-
-static int dvb_frontend_release(struct inode *inode, struct file *file)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dvb_frontend *fe = dvbdev->priv;
-	struct dvb_frontend_private *fepriv = fe->frontend_priv;
-	int ret;
-
-	dprintk ("%s\n", __func__);
-
-	if ((file->f_flags & O_ACCMODE) != O_RDONLY) {
-		fepriv->release_jiffies = jiffies;
-		mb();
-	}
-
-	ret = dvb_generic_release (inode, file);
-
-	if (dvbdev->users == -1) {
-		wake_up(&fepriv->wait_queue);
-		if (fepriv->exit != DVB_FE_NO_EXIT) {
-			fops_put(file->f_op);
-			file->f_op = NULL;
-			wake_up(&dvbdev->wait_queue);
-		}
-		if (fe->ops.ts_bus_ctrl)
-			fe->ops.ts_bus_ctrl(fe, 0);
-	}
-
-	return ret;
-}
-
-static const struct file_operations dvb_frontend_fops = {
-	.owner		= THIS_MODULE,
-	.unlocked_ioctl	= dvb_generic_ioctl,
-	.poll		= dvb_frontend_poll,
-	.open		= dvb_frontend_open,
-	.release	= dvb_frontend_release,
-	.llseek		= noop_llseek,
-};
-
-int dvb_register_frontend(struct dvb_adapter* dvb,
-			  struct dvb_frontend* fe)
-{
-	struct dvb_frontend_private *fepriv;
-	static const struct dvb_device dvbdev_template = {
-		.users = ~0,
-		.writers = 1,
-		.readers = (~0)-1,
-		.fops = &dvb_frontend_fops,
-		.kernel_ioctl = dvb_frontend_ioctl
-	};
-
-	dprintk ("%s\n", __func__);
-
-	if (mutex_lock_interruptible(&frontend_mutex))
-		return -ERESTARTSYS;
-
-	fe->frontend_priv = kzalloc(sizeof(struct dvb_frontend_private), GFP_KERNEL);
-	if (fe->frontend_priv == NULL) {
-		mutex_unlock(&frontend_mutex);
-		return -ENOMEM;
-	}
-	fepriv = fe->frontend_priv;
-
-	sema_init(&fepriv->sem, 1);
-	init_waitqueue_head (&fepriv->wait_queue);
-	init_waitqueue_head (&fepriv->events.wait_queue);
-	mutex_init(&fepriv->events.mtx);
-	fe->dvb = dvb;
-	fepriv->inversion = INVERSION_OFF;
-
-	printk ("DVB: registering adapter %i frontend %i (%s)...\n",
-		fe->dvb->num,
-		fe->id,
-		fe->ops.info.name);
-
-	dvb_register_device (fe->dvb, &fepriv->dvbdev, &dvbdev_template,
-			     fe, DVB_DEVICE_FRONTEND);
-
-	/*
-	 * Initialize the cache to the proper values according with the
-	 * first supported delivery system (ops->delsys[0])
-	 */
-
-        fe->dtv_property_cache.delivery_system = fe->ops.delsys[0];
-	dvb_frontend_clear_cache(fe);
-
-	mutex_unlock(&frontend_mutex);
-	return 0;
-}
-EXPORT_SYMBOL(dvb_register_frontend);
-
-int dvb_unregister_frontend(struct dvb_frontend* fe)
-{
-	struct dvb_frontend_private *fepriv = fe->frontend_priv;
-	dprintk ("%s\n", __func__);
-
-	mutex_lock(&frontend_mutex);
-	dvb_frontend_stop (fe);
-	mutex_unlock(&frontend_mutex);
-
-	if (fepriv->dvbdev->users < -1)
-		wait_event(fepriv->dvbdev->wait_queue,
-				fepriv->dvbdev->users==-1);
-
-	mutex_lock(&frontend_mutex);
-	dvb_unregister_device (fepriv->dvbdev);
-
-	/* fe is invalid now */
-	kfree(fepriv);
-	mutex_unlock(&frontend_mutex);
-	return 0;
-}
-EXPORT_SYMBOL(dvb_unregister_frontend);
-
-#ifdef CONFIG_MEDIA_ATTACH
-void dvb_frontend_detach(struct dvb_frontend* fe)
-{
-	void *ptr;
-
-	if (fe->ops.release_sec) {
-		fe->ops.release_sec(fe);
-		symbol_put_addr(fe->ops.release_sec);
-	}
-	if (fe->ops.tuner_ops.release) {
-		fe->ops.tuner_ops.release(fe);
-		symbol_put_addr(fe->ops.tuner_ops.release);
-	}
-	if (fe->ops.analog_ops.release) {
-		fe->ops.analog_ops.release(fe);
-		symbol_put_addr(fe->ops.analog_ops.release);
-	}
-	ptr = (void*)fe->ops.release;
-	if (ptr) {
-		fe->ops.release(fe);
-		symbol_put_addr(ptr);
-	}
-}
-#else
-void dvb_frontend_detach(struct dvb_frontend* fe)
-{
-	if (fe->ops.release_sec)
-		fe->ops.release_sec(fe);
-	if (fe->ops.tuner_ops.release)
-		fe->ops.tuner_ops.release(fe);
-	if (fe->ops.analog_ops.release)
-		fe->ops.analog_ops.release(fe);
-	if (fe->ops.release)
-		fe->ops.release(fe);
-}
-#endif
-EXPORT_SYMBOL(dvb_frontend_detach);
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h
deleted file mode 100644
index 7c64c09..0000000
--- a/drivers/media/dvb/dvb-core/dvb_frontend.h
+++ /dev/null
@@ -1,423 +0,0 @@
-/*
- * dvb_frontend.h
- *
- * Copyright (C) 2001 convergence integrated media GmbH
- * Copyright (C) 2004 convergence GmbH
- *
- * Written by Ralph Metzler
- * Overhauled by Holger Waechtler
- * Kernel I2C stuff by Michael Hunold <hunold@convergence.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
-
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#ifndef _DVB_FRONTEND_H_
-#define _DVB_FRONTEND_H_
-
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/ioctl.h>
-#include <linux/i2c.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-
-#include <linux/dvb/frontend.h>
-
-#include "dvbdev.h"
-
-/*
- * Maximum number of Delivery systems per frontend. It
- * should be smaller or equal to 32
- */
-#define MAX_DELSYS	8
-
-struct dvb_frontend_tune_settings {
-	int min_delay_ms;
-	int step_size;
-	int max_drift;
-};
-
-struct dvb_frontend;
-
-struct dvb_tuner_info {
-	char name[128];
-
-	u32 frequency_min;
-	u32 frequency_max;
-	u32 frequency_step;
-
-	u32 bandwidth_min;
-	u32 bandwidth_max;
-	u32 bandwidth_step;
-};
-
-struct analog_parameters {
-	unsigned int frequency;
-	unsigned int mode;
-	unsigned int audmode;
-	u64 std;
-};
-
-enum dvbfe_modcod {
-	DVBFE_MODCOD_DUMMY_PLFRAME	= 0,
-	DVBFE_MODCOD_QPSK_1_4,
-	DVBFE_MODCOD_QPSK_1_3,
-	DVBFE_MODCOD_QPSK_2_5,
-	DVBFE_MODCOD_QPSK_1_2,
-	DVBFE_MODCOD_QPSK_3_5,
-	DVBFE_MODCOD_QPSK_2_3,
-	DVBFE_MODCOD_QPSK_3_4,
-	DVBFE_MODCOD_QPSK_4_5,
-	DVBFE_MODCOD_QPSK_5_6,
-	DVBFE_MODCOD_QPSK_8_9,
-	DVBFE_MODCOD_QPSK_9_10,
-	DVBFE_MODCOD_8PSK_3_5,
-	DVBFE_MODCOD_8PSK_2_3,
-	DVBFE_MODCOD_8PSK_3_4,
-	DVBFE_MODCOD_8PSK_5_6,
-	DVBFE_MODCOD_8PSK_8_9,
-	DVBFE_MODCOD_8PSK_9_10,
-	DVBFE_MODCOD_16APSK_2_3,
-	DVBFE_MODCOD_16APSK_3_4,
-	DVBFE_MODCOD_16APSK_4_5,
-	DVBFE_MODCOD_16APSK_5_6,
-	DVBFE_MODCOD_16APSK_8_9,
-	DVBFE_MODCOD_16APSK_9_10,
-	DVBFE_MODCOD_32APSK_3_4,
-	DVBFE_MODCOD_32APSK_4_5,
-	DVBFE_MODCOD_32APSK_5_6,
-	DVBFE_MODCOD_32APSK_8_9,
-	DVBFE_MODCOD_32APSK_9_10,
-	DVBFE_MODCOD_RESERVED_1,
-	DVBFE_MODCOD_BPSK_1_3,
-	DVBFE_MODCOD_BPSK_1_4,
-	DVBFE_MODCOD_RESERVED_2
-};
-
-enum tuner_param {
-	DVBFE_TUNER_FREQUENCY		= (1 <<  0),
-	DVBFE_TUNER_TUNERSTEP		= (1 <<  1),
-	DVBFE_TUNER_IFFREQ		= (1 <<  2),
-	DVBFE_TUNER_BANDWIDTH		= (1 <<  3),
-	DVBFE_TUNER_REFCLOCK		= (1 <<  4),
-	DVBFE_TUNER_IQSENSE		= (1 <<  5),
-	DVBFE_TUNER_DUMMY		= (1 << 31)
-};
-
-/*
- * ALGO_HW: (Hardware Algorithm)
- * ----------------------------------------------------------------
- * Devices that support this algorithm do everything in hardware
- * and no software support is needed to handle them.
- * Requesting these devices to LOCK is the only thing required,
- * device is supposed to do everything in the hardware.
- *
- * ALGO_SW: (Software Algorithm)
- * ----------------------------------------------------------------
- * These are dumb devices, that require software to do everything
- *
- * ALGO_CUSTOM: (Customizable Agorithm)
- * ----------------------------------------------------------------
- * Devices having this algorithm can be customized to have specific
- * algorithms in the frontend driver, rather than simply doing a
- * software zig-zag. In this case the zigzag maybe hardware assisted
- * or it maybe completely done in hardware. In all cases, usage of
- * this algorithm, in conjunction with the search and track
- * callbacks, utilizes the driver specific algorithm.
- *
- * ALGO_RECOVERY: (Recovery Algorithm)
- * ----------------------------------------------------------------
- * These devices have AUTO recovery capabilities from LOCK failure
- */
-enum dvbfe_algo {
-	DVBFE_ALGO_HW			= (1 <<  0),
-	DVBFE_ALGO_SW			= (1 <<  1),
-	DVBFE_ALGO_CUSTOM		= (1 <<  2),
-	DVBFE_ALGO_RECOVERY		= (1 << 31)
-};
-
-struct tuner_state {
-	u32 frequency;
-	u32 tunerstep;
-	u32 ifreq;
-	u32 bandwidth;
-	u32 iqsense;
-	u32 refclock;
-};
-
-/*
- * search callback possible return status
- *
- * DVBFE_ALGO_SEARCH_SUCCESS
- * The frontend search algorithm completed and returned successfully
- *
- * DVBFE_ALGO_SEARCH_ASLEEP
- * The frontend search algorithm is sleeping
- *
- * DVBFE_ALGO_SEARCH_FAILED
- * The frontend search for a signal failed
- *
- * DVBFE_ALGO_SEARCH_INVALID
- * The frontend search algorith was probably supplied with invalid
- * parameters and the search is an invalid one
- *
- * DVBFE_ALGO_SEARCH_ERROR
- * The frontend search algorithm failed due to some error
- *
- * DVBFE_ALGO_SEARCH_AGAIN
- * The frontend search algorithm was requested to search again
- */
-enum dvbfe_search {
-	DVBFE_ALGO_SEARCH_SUCCESS	= (1 <<  0),
-	DVBFE_ALGO_SEARCH_ASLEEP	= (1 <<  1),
-	DVBFE_ALGO_SEARCH_FAILED	= (1 <<  2),
-	DVBFE_ALGO_SEARCH_INVALID	= (1 <<  3),
-	DVBFE_ALGO_SEARCH_AGAIN		= (1 <<  4),
-	DVBFE_ALGO_SEARCH_ERROR		= (1 << 31),
-};
-
-
-struct dvb_tuner_ops {
-
-	struct dvb_tuner_info info;
-
-	int (*release)(struct dvb_frontend *fe);
-	int (*init)(struct dvb_frontend *fe);
-	int (*sleep)(struct dvb_frontend *fe);
-
-	/** This is for simple PLLs - set all parameters in one go. */
-	int (*set_params)(struct dvb_frontend *fe);
-	int (*set_analog_params)(struct dvb_frontend *fe, struct analog_parameters *p);
-
-	/** This is support for demods like the mt352 - fills out the supplied buffer with what to write. */
-	int (*calc_regs)(struct dvb_frontend *fe, u8 *buf, int buf_len);
-
-	/** This is to allow setting tuner-specific configs */
-	int (*set_config)(struct dvb_frontend *fe, void *priv_cfg);
-
-	int (*get_frequency)(struct dvb_frontend *fe, u32 *frequency);
-	int (*get_bandwidth)(struct dvb_frontend *fe, u32 *bandwidth);
-	int (*get_if_frequency)(struct dvb_frontend *fe, u32 *frequency);
-
-#define TUNER_STATUS_LOCKED 1
-#define TUNER_STATUS_STEREO 2
-	int (*get_status)(struct dvb_frontend *fe, u32 *status);
-	int (*get_rf_strength)(struct dvb_frontend *fe, u16 *strength);
-	int (*get_afc)(struct dvb_frontend *fe, s32 *afc);
-
-	/** These are provided separately from set_params in order to facilitate silicon
-	 * tuners which require sophisticated tuning loops, controlling each parameter separately. */
-	int (*set_frequency)(struct dvb_frontend *fe, u32 frequency);
-	int (*set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth);
-
-	/*
-	 * These are provided separately from set_params in order to facilitate silicon
-	 * tuners which require sophisticated tuning loops, controlling each parameter separately.
-	 */
-	int (*set_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state);
-	int (*get_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state);
-};
-
-struct analog_demod_info {
-	char *name;
-};
-
-struct analog_demod_ops {
-
-	struct analog_demod_info info;
-
-	void (*set_params)(struct dvb_frontend *fe,
-			   struct analog_parameters *params);
-	int  (*has_signal)(struct dvb_frontend *fe);
-	int  (*get_afc)(struct dvb_frontend *fe);
-	void (*tuner_status)(struct dvb_frontend *fe);
-	void (*standby)(struct dvb_frontend *fe);
-	void (*release)(struct dvb_frontend *fe);
-	int  (*i2c_gate_ctrl)(struct dvb_frontend *fe, int enable);
-
-	/** This is to allow setting tuner-specific configuration */
-	int (*set_config)(struct dvb_frontend *fe, void *priv_cfg);
-};
-
-struct dtv_frontend_properties;
-
-struct dvb_frontend_ops {
-
-	struct dvb_frontend_info info;
-
-	u8 delsys[MAX_DELSYS];
-
-	void (*release)(struct dvb_frontend* fe);
-	void (*release_sec)(struct dvb_frontend* fe);
-
-	int (*init)(struct dvb_frontend* fe);
-	int (*sleep)(struct dvb_frontend* fe);
-
-	int (*write)(struct dvb_frontend* fe, const u8 buf[], int len);
-
-	/* if this is set, it overrides the default swzigzag */
-	int (*tune)(struct dvb_frontend* fe,
-		    bool re_tune,
-		    unsigned int mode_flags,
-		    unsigned int *delay,
-		    fe_status_t *status);
-	/* get frontend tuning algorithm from the module */
-	enum dvbfe_algo (*get_frontend_algo)(struct dvb_frontend *fe);
-
-	/* these two are only used for the swzigzag code */
-	int (*set_frontend)(struct dvb_frontend *fe);
-	int (*get_tune_settings)(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* settings);
-
-	int (*get_frontend)(struct dvb_frontend *fe);
-
-	int (*read_status)(struct dvb_frontend* fe, fe_status_t* status);
-	int (*read_ber)(struct dvb_frontend* fe, u32* ber);
-	int (*read_signal_strength)(struct dvb_frontend* fe, u16* strength);
-	int (*read_snr)(struct dvb_frontend* fe, u16* snr);
-	int (*read_ucblocks)(struct dvb_frontend* fe, u32* ucblocks);
-
-	int (*diseqc_reset_overload)(struct dvb_frontend* fe);
-	int (*diseqc_send_master_cmd)(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd);
-	int (*diseqc_recv_slave_reply)(struct dvb_frontend* fe, struct dvb_diseqc_slave_reply* reply);
-	int (*diseqc_send_burst)(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd);
-	int (*set_tone)(struct dvb_frontend* fe, fe_sec_tone_mode_t tone);
-	int (*set_voltage)(struct dvb_frontend* fe, fe_sec_voltage_t voltage);
-	int (*enable_high_lnb_voltage)(struct dvb_frontend* fe, long arg);
-	int (*dishnetwork_send_legacy_command)(struct dvb_frontend* fe, unsigned long cmd);
-	int (*i2c_gate_ctrl)(struct dvb_frontend* fe, int enable);
-	int (*ts_bus_ctrl)(struct dvb_frontend* fe, int acquire);
-
-	/* These callbacks are for devices that implement their own
-	 * tuning algorithms, rather than a simple swzigzag
-	 */
-	enum dvbfe_search (*search)(struct dvb_frontend *fe);
-
-	struct dvb_tuner_ops tuner_ops;
-	struct analog_demod_ops analog_ops;
-
-	int (*set_property)(struct dvb_frontend* fe, struct dtv_property* tvp);
-	int (*get_property)(struct dvb_frontend* fe, struct dtv_property* tvp);
-};
-
-#ifdef __DVB_CORE__
-#define MAX_EVENT 8
-
-struct dvb_fe_events {
-	struct dvb_frontend_event events[MAX_EVENT];
-	int			  eventw;
-	int			  eventr;
-	int			  overflow;
-	wait_queue_head_t	  wait_queue;
-	struct mutex		  mtx;
-};
-#endif
-
-struct dtv_frontend_properties {
-
-	/* Cache State */
-	u32			state;
-
-	u32			frequency;
-	fe_modulation_t		modulation;
-
-	fe_sec_voltage_t	voltage;
-	fe_sec_tone_mode_t	sectone;
-	fe_spectral_inversion_t	inversion;
-	fe_code_rate_t		fec_inner;
-	fe_transmit_mode_t	transmission_mode;
-	u32			bandwidth_hz;	/* 0 = AUTO */
-	fe_guard_interval_t	guard_interval;
-	fe_hierarchy_t		hierarchy;
-	u32			symbol_rate;
-	fe_code_rate_t		code_rate_HP;
-	fe_code_rate_t		code_rate_LP;
-
-	fe_pilot_t		pilot;
-	fe_rolloff_t		rolloff;
-
-	fe_delivery_system_t	delivery_system;
-
-	/* ISDB-T specifics */
-	u8			isdbt_partial_reception;
-	u8			isdbt_sb_mode;
-	u8			isdbt_sb_subchannel;
-	u32			isdbt_sb_segment_idx;
-	u32			isdbt_sb_segment_count;
-	u8			isdbt_layer_enabled;
-	struct {
-	    u8			segment_count;
-	    fe_code_rate_t	fec;
-	    fe_modulation_t	modulation;
-	    u8			interleaving;
-	} layer[3];
-
-	/* ISDB-T specifics */
-	u32			isdbs_ts_id;
-
-	/* DVB-T2 specifics */
-	u32                     dvbt2_plp_id;
-
-	/* ATSC-MH specifics */
-	u8			atscmh_fic_ver;
-	u8			atscmh_parade_id;
-	u8			atscmh_nog;
-	u8			atscmh_tnog;
-	u8			atscmh_sgn;
-	u8			atscmh_prc;
-
-	u8			atscmh_rs_frame_mode;
-	u8			atscmh_rs_frame_ensemble;
-	u8			atscmh_rs_code_mode_pri;
-	u8			atscmh_rs_code_mode_sec;
-	u8			atscmh_sccc_block_mode;
-	u8			atscmh_sccc_code_mode_a;
-	u8			atscmh_sccc_code_mode_b;
-	u8			atscmh_sccc_code_mode_c;
-	u8			atscmh_sccc_code_mode_d;
-};
-
-struct dvb_frontend {
-	struct dvb_frontend_ops ops;
-	struct dvb_adapter *dvb;
-	void *demodulator_priv;
-	void *tuner_priv;
-	void *frontend_priv;
-	void *sec_priv;
-	void *analog_demod_priv;
-	struct dtv_frontend_properties dtv_property_cache;
-#define DVB_FRONTEND_COMPONENT_TUNER 0
-#define DVB_FRONTEND_COMPONENT_DEMOD 1
-	int (*callback)(void *adapter_priv, int component, int cmd, int arg);
-	int id;
-};
-
-extern int dvb_register_frontend(struct dvb_adapter *dvb,
-				 struct dvb_frontend *fe);
-
-extern int dvb_unregister_frontend(struct dvb_frontend *fe);
-
-extern void dvb_frontend_detach(struct dvb_frontend *fe);
-
-extern void dvb_frontend_reinitialise(struct dvb_frontend *fe);
-
-extern void dvb_frontend_sleep_until(struct timeval *waketime, u32 add_usec);
-extern s32 timeval_usec_diff(struct timeval lasttime, struct timeval curtime);
-
-#endif
diff --git a/drivers/media/dvb/dvb-core/dvb_math.c b/drivers/media/dvb/dvb-core/dvb_math.c
deleted file mode 100644
index beb7c93..0000000
--- a/drivers/media/dvb/dvb-core/dvb_math.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * dvb-math provides some complex fixed-point math
- * operations shared between the dvb related stuff
- *
- * Copyright (C) 2006 Christoph Pfister (christophpfister@gmail.com)
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/bitops.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/bug.h>
-#include "dvb_math.h"
-
-static const unsigned short logtable[256] = {
-	0x0000, 0x0171, 0x02e0, 0x044e, 0x05ba, 0x0725, 0x088e, 0x09f7,
-	0x0b5d, 0x0cc3, 0x0e27, 0x0f8a, 0x10eb, 0x124b, 0x13aa, 0x1508,
-	0x1664, 0x17bf, 0x1919, 0x1a71, 0x1bc8, 0x1d1e, 0x1e73, 0x1fc6,
-	0x2119, 0x226a, 0x23ba, 0x2508, 0x2656, 0x27a2, 0x28ed, 0x2a37,
-	0x2b80, 0x2cc8, 0x2e0f, 0x2f54, 0x3098, 0x31dc, 0x331e, 0x345f,
-	0x359f, 0x36de, 0x381b, 0x3958, 0x3a94, 0x3bce, 0x3d08, 0x3e41,
-	0x3f78, 0x40af, 0x41e4, 0x4319, 0x444c, 0x457f, 0x46b0, 0x47e1,
-	0x4910, 0x4a3f, 0x4b6c, 0x4c99, 0x4dc5, 0x4eef, 0x5019, 0x5142,
-	0x526a, 0x5391, 0x54b7, 0x55dc, 0x5700, 0x5824, 0x5946, 0x5a68,
-	0x5b89, 0x5ca8, 0x5dc7, 0x5ee5, 0x6003, 0x611f, 0x623a, 0x6355,
-	0x646f, 0x6588, 0x66a0, 0x67b7, 0x68ce, 0x69e4, 0x6af8, 0x6c0c,
-	0x6d20, 0x6e32, 0x6f44, 0x7055, 0x7165, 0x7274, 0x7383, 0x7490,
-	0x759d, 0x76aa, 0x77b5, 0x78c0, 0x79ca, 0x7ad3, 0x7bdb, 0x7ce3,
-	0x7dea, 0x7ef0, 0x7ff6, 0x80fb, 0x81ff, 0x8302, 0x8405, 0x8507,
-	0x8608, 0x8709, 0x8809, 0x8908, 0x8a06, 0x8b04, 0x8c01, 0x8cfe,
-	0x8dfa, 0x8ef5, 0x8fef, 0x90e9, 0x91e2, 0x92db, 0x93d2, 0x94ca,
-	0x95c0, 0x96b6, 0x97ab, 0x98a0, 0x9994, 0x9a87, 0x9b7a, 0x9c6c,
-	0x9d5e, 0x9e4f, 0x9f3f, 0xa02e, 0xa11e, 0xa20c, 0xa2fa, 0xa3e7,
-	0xa4d4, 0xa5c0, 0xa6ab, 0xa796, 0xa881, 0xa96a, 0xaa53, 0xab3c,
-	0xac24, 0xad0c, 0xadf2, 0xaed9, 0xafbe, 0xb0a4, 0xb188, 0xb26c,
-	0xb350, 0xb433, 0xb515, 0xb5f7, 0xb6d9, 0xb7ba, 0xb89a, 0xb97a,
-	0xba59, 0xbb38, 0xbc16, 0xbcf4, 0xbdd1, 0xbead, 0xbf8a, 0xc065,
-	0xc140, 0xc21b, 0xc2f5, 0xc3cf, 0xc4a8, 0xc580, 0xc658, 0xc730,
-	0xc807, 0xc8de, 0xc9b4, 0xca8a, 0xcb5f, 0xcc34, 0xcd08, 0xcddc,
-	0xceaf, 0xcf82, 0xd054, 0xd126, 0xd1f7, 0xd2c8, 0xd399, 0xd469,
-	0xd538, 0xd607, 0xd6d6, 0xd7a4, 0xd872, 0xd93f, 0xda0c, 0xdad9,
-	0xdba5, 0xdc70, 0xdd3b, 0xde06, 0xded0, 0xdf9a, 0xe063, 0xe12c,
-	0xe1f5, 0xe2bd, 0xe385, 0xe44c, 0xe513, 0xe5d9, 0xe69f, 0xe765,
-	0xe82a, 0xe8ef, 0xe9b3, 0xea77, 0xeb3b, 0xebfe, 0xecc1, 0xed83,
-	0xee45, 0xef06, 0xefc8, 0xf088, 0xf149, 0xf209, 0xf2c8, 0xf387,
-	0xf446, 0xf505, 0xf5c3, 0xf680, 0xf73e, 0xf7fb, 0xf8b7, 0xf973,
-	0xfa2f, 0xfaea, 0xfba5, 0xfc60, 0xfd1a, 0xfdd4, 0xfe8e, 0xff47
-};
-
-unsigned int intlog2(u32 value)
-{
-	/**
-	 *	returns: log2(value) * 2^24
-	 *	wrong result if value = 0 (log2(0) is undefined)
-	 */
-	unsigned int msb;
-	unsigned int logentry;
-	unsigned int significand;
-	unsigned int interpolation;
-
-	if (unlikely(value == 0)) {
-		WARN_ON(1);
-		return 0;
-	}
-
-	/* first detect the msb (count begins at 0) */
-	msb = fls(value) - 1;
-
-	/**
-	 *	now we use a logtable after the following method:
-	 *
-	 *	log2(2^x * y) * 2^24 = x * 2^24 + log2(y) * 2^24
-	 *	where x = msb and therefore 1 <= y < 2
-	 *	first y is determined by shifting the value left
-	 *	so that msb is bit 31
-	 *		0x00231f56 -> 0x8C7D5800
-	 *	the result is y * 2^31 -> "significand"
-	 *	then the highest 9 bits are used for a table lookup
-	 *	the highest bit is discarded because it's always set
-	 *	the highest nine bits in our example are 100011000
-	 *	so we would use the entry 0x18
-	 */
-	significand = value << (31 - msb);
-	logentry = (significand >> 23) & 0xff;
-
-	/**
-	 *	last step we do is interpolation because of the
-	 *	limitations of the log table the error is that part of
-	 *	the significand which isn't used for lookup then we
-	 *	compute the ratio between the error and the next table entry
-	 *	and interpolate it between the log table entry used and the
-	 *	next one the biggest error possible is 0x7fffff
-	 *	(in our example it's 0x7D5800)
-	 *	needed value for next table entry is 0x800000
-	 *	so the interpolation is
-	 *	(error / 0x800000) * (logtable_next - logtable_current)
-	 *	in the implementation the division is moved to the end for
-	 *	better accuracy there is also an overflow correction if
-	 *	logtable_next is 256
-	 */
-	interpolation = ((significand & 0x7fffff) *
-			((logtable[(logentry + 1) & 0xff] -
-			  logtable[logentry]) & 0xffff)) >> 15;
-
-	/* now we return the result */
-	return ((msb << 24) + (logtable[logentry] << 8) + interpolation);
-}
-EXPORT_SYMBOL(intlog2);
-
-unsigned int intlog10(u32 value)
-{
-	/**
-	 *	returns: log10(value) * 2^24
-	 *	wrong result if value = 0 (log10(0) is undefined)
-	 */
-	u64 log;
-
-	if (unlikely(value == 0)) {
-		WARN_ON(1);
-		return 0;
-	}
-
-	log = intlog2(value);
-
-	/**
-	 *	we use the following method:
-	 *	log10(x) = log2(x) * log10(2)
-	 */
-
-	return (log * 646456993) >> 31;
-}
-EXPORT_SYMBOL(intlog10);
diff --git a/drivers/media/dvb/dvb-core/dvb_math.h b/drivers/media/dvb/dvb-core/dvb_math.h
deleted file mode 100644
index aecc867..0000000
--- a/drivers/media/dvb/dvb-core/dvb_math.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * dvb-math provides some complex fixed-point math
- * operations shared between the dvb related stuff
- *
- * Copyright (C) 2006 Christoph Pfister (christophpfister@gmail.com)
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __DVB_MATH_H
-#define __DVB_MATH_H
-
-#include <linux/types.h>
-
-/**
- * computes log2 of a value; the result is shifted left by 24 bits
- *
- * to use rational values you can use the following method:
- *   intlog2(value) = intlog2(value * 2^x) - x * 2^24
- *
- * example: intlog2(8) will give 3 << 24 = 3 * 2^24
- * example: intlog2(9) will give 3 << 24 + ... = 3.16... * 2^24
- * example: intlog2(1.5) = intlog2(3) - 2^24 = 0.584... * 2^24
- *
- * @param value The value (must be != 0)
- * @return log2(value) * 2^24
- */
-extern unsigned int intlog2(u32 value);
-
-/**
- * computes log10 of a value; the result is shifted left by 24 bits
- *
- * to use rational values you can use the following method:
- *   intlog10(value) = intlog10(value * 10^x) - x * 2^24
- *
- * example: intlog10(1000) will give 3 << 24 = 3 * 2^24
- *   due to the implementation intlog10(1000) might be not exactly 3 * 2^24
- *
- * look at intlog2 for similar examples
- *
- * @param value The value (must be != 0)
- * @return log10(value) * 2^24
- */
-extern unsigned int intlog10(u32 value);
-
-#endif
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
deleted file mode 100644
index c211768..0000000
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ /dev/null
@@ -1,1516 +0,0 @@
-/*
- * dvb_net.c
- *
- * Copyright (C) 2001 Convergence integrated media GmbH
- *                    Ralph Metzler <ralph@convergence.de>
- * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
- *
- * ULE Decapsulation code:
- * Copyright (C) 2003, 2004 gcs - Global Communication & Services GmbH.
- *                      and Department of Scientific Computing
- *                          Paris Lodron University of Salzburg.
- *                          Hilmar Linder <hlinder@cosy.sbg.ac.at>
- *                      and Wolfram Stering <wstering@cosy.sbg.ac.at>
- *
- * ULE Decaps according to RFC 4326.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * ULE ChangeLog:
- * Feb 2004: hl/ws v1: Implementing draft-fair-ipdvb-ule-01.txt
- *
- * Dec 2004: hl/ws v2: Implementing draft-ietf-ipdvb-ule-03.txt:
- *                       ULE Extension header handling.
- *                     Bugreports by Moritz Vieth and Hanno Tersteegen,
- *                       Fraunhofer Institute for Open Communication Systems
- *                       Competence Center for Advanced Satellite Communications.
- *                     Bugfixes and robustness improvements.
- *                     Filtering on dest MAC addresses, if present (D-Bit = 0)
- *                     ULE_DEBUG compile-time option.
- * Apr 2006: cp v3:    Bugfixes and compliency with RFC 4326 (ULE) by
- *                       Christian Praehauser <cpraehaus@cosy.sbg.ac.at>,
- *                       Paris Lodron University of Salzburg.
- */
-
-/*
- * FIXME / TODO (dvb_net.c):
- *
- * Unloading does not work for 2.6.9 kernels: a refcount doesn't go to zero.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/dvb/net.h>
-#include <linux/uio.h>
-#include <asm/uaccess.h>
-#include <linux/crc32.h>
-#include <linux/mutex.h>
-#include <linux/sched.h>
-
-#include "dvb_demux.h"
-#include "dvb_net.h"
-
-static int dvb_net_debug;
-module_param(dvb_net_debug, int, 0444);
-MODULE_PARM_DESC(dvb_net_debug, "enable debug messages");
-
-#define dprintk(x...) do { if (dvb_net_debug) printk(x); } while (0)
-
-
-static inline __u32 iov_crc32( __u32 c, struct kvec *iov, unsigned int cnt )
-{
-	unsigned int j;
-	for (j = 0; j < cnt; j++)
-		c = crc32_be( c, iov[j].iov_base, iov[j].iov_len );
-	return c;
-}
-
-
-#define DVB_NET_MULTICAST_MAX 10
-
-#undef ULE_DEBUG
-
-#ifdef ULE_DEBUG
-
-#define MAC_ADDR_PRINTFMT "%.2x:%.2x:%.2x:%.2x:%.2x:%.2x"
-#define MAX_ADDR_PRINTFMT_ARGS(macap) (macap)[0],(macap)[1],(macap)[2],(macap)[3],(macap)[4],(macap)[5]
-
-#define isprint(c)	((c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z') || (c >= '0' && c <= '9'))
-
-static void hexdump( const unsigned char *buf, unsigned short len )
-{
-	char str[80], octet[10];
-	int ofs, i, l;
-
-	for (ofs = 0; ofs < len; ofs += 16) {
-		sprintf( str, "%03d: ", ofs );
-
-		for (i = 0; i < 16; i++) {
-			if ((i + ofs) < len)
-				sprintf( octet, "%02x ", buf[ofs + i] );
-			else
-				strcpy( octet, "   " );
-
-			strcat( str, octet );
-		}
-		strcat( str, "  " );
-		l = strlen( str );
-
-		for (i = 0; (i < 16) && ((i + ofs) < len); i++)
-			str[l++] = isprint( buf[ofs + i] ) ? buf[ofs + i] : '.';
-
-		str[l] = '\0';
-		printk( KERN_WARNING "%s\n", str );
-	}
-}
-
-#endif
-
-struct dvb_net_priv {
-	int in_use;
-	u16 pid;
-	struct net_device *net;
-	struct dvb_net *host;
-	struct dmx_demux *demux;
-	struct dmx_section_feed *secfeed;
-	struct dmx_section_filter *secfilter;
-	struct dmx_ts_feed *tsfeed;
-	int multi_num;
-	struct dmx_section_filter *multi_secfilter[DVB_NET_MULTICAST_MAX];
-	unsigned char multi_macs[DVB_NET_MULTICAST_MAX][6];
-	int rx_mode;
-#define RX_MODE_UNI 0
-#define RX_MODE_MULTI 1
-#define RX_MODE_ALL_MULTI 2
-#define RX_MODE_PROMISC 3
-	struct work_struct set_multicast_list_wq;
-	struct work_struct restart_net_feed_wq;
-	unsigned char feedtype;			/* Either FEED_TYPE_ or FEED_TYPE_ULE */
-	int need_pusi;				/* Set to 1, if synchronization on PUSI required. */
-	unsigned char tscc;			/* TS continuity counter after sync on PUSI. */
-	struct sk_buff *ule_skb;		/* ULE SNDU decodes into this buffer. */
-	unsigned char *ule_next_hdr;		/* Pointer into skb to next ULE extension header. */
-	unsigned short ule_sndu_len;		/* ULE SNDU length in bytes, w/o D-Bit. */
-	unsigned short ule_sndu_type;		/* ULE SNDU type field, complete. */
-	unsigned char ule_sndu_type_1;		/* ULE SNDU type field, if split across 2 TS cells. */
-	unsigned char ule_dbit;			/* Whether the DestMAC address present
-						 * or not (bit is set). */
-	unsigned char ule_bridged;		/* Whether the ULE_BRIDGED extension header was found. */
-	int ule_sndu_remain;			/* Nr. of bytes still required for current ULE SNDU. */
-	unsigned long ts_count;			/* Current ts cell counter. */
-	struct mutex mutex;
-};
-
-
-/**
- *	Determine the packet's protocol ID. The rule here is that we
- *	assume 802.3 if the type field is short enough to be a length.
- *	This is normal practice and works for any 'now in use' protocol.
- *
- *  stolen from eth.c out of the linux kernel, hacked for dvb-device
- *  by Michael Holzt <kju@debian.org>
- */
-static __be16 dvb_net_eth_type_trans(struct sk_buff *skb,
-				      struct net_device *dev)
-{
-	struct ethhdr *eth;
-	unsigned char *rawp;
-
-	skb_reset_mac_header(skb);
-	skb_pull(skb,dev->hard_header_len);
-	eth = eth_hdr(skb);
-
-	if (*eth->h_dest & 1) {
-		if(memcmp(eth->h_dest,dev->broadcast, ETH_ALEN)==0)
-			skb->pkt_type=PACKET_BROADCAST;
-		else
-			skb->pkt_type=PACKET_MULTICAST;
-	}
-
-	if (ntohs(eth->h_proto) >= 1536)
-		return eth->h_proto;
-
-	rawp = skb->data;
-
-	/**
-	 *	This is a magic hack to spot IPX packets. Older Novell breaks
-	 *	the protocol design and runs IPX over 802.3 without an 802.2 LLC
-	 *	layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This
-	 *	won't work for fault tolerant netware but does for the rest.
-	 */
-	if (*(unsigned short *)rawp == 0xFFFF)
-		return htons(ETH_P_802_3);
-
-	/**
-	 *	Real 802.2 LLC
-	 */
-	return htons(ETH_P_802_2);
-}
-
-#define TS_SZ	188
-#define TS_SYNC	0x47
-#define TS_TEI	0x80
-#define TS_SC	0xC0
-#define TS_PUSI	0x40
-#define TS_AF_A	0x20
-#define TS_AF_D	0x10
-
-/* ULE Extension Header handlers. */
-
-#define ULE_TEST	0
-#define ULE_BRIDGED	1
-
-#define ULE_OPTEXTHDR_PADDING 0
-
-static int ule_test_sndu( struct dvb_net_priv *p )
-{
-	return -1;
-}
-
-static int ule_bridged_sndu( struct dvb_net_priv *p )
-{
-	struct ethhdr *hdr = (struct ethhdr*) p->ule_next_hdr;
-	if(ntohs(hdr->h_proto) < 1536) {
-		int framelen = p->ule_sndu_len - ((p->ule_next_hdr+sizeof(struct ethhdr)) - p->ule_skb->data);
-		/* A frame Type < 1536 for a bridged frame, introduces a LLC Length field. */
-		if(framelen != ntohs(hdr->h_proto)) {
-			return -1;
-		}
-	}
-	/* Note:
-	 * From RFC4326:
-	 *  "A bridged SNDU is a Mandatory Extension Header of Type 1.
-	 *   It must be the final (or only) extension header specified in the header chain of a SNDU."
-	 * The 'ule_bridged' flag will cause the extension header processing loop to terminate.
-	 */
-	p->ule_bridged = 1;
-	return 0;
-}
-
-static int ule_exthdr_padding(struct dvb_net_priv *p)
-{
-	return 0;
-}
-
-/** Handle ULE extension headers.
- *  Function is called after a successful CRC32 verification of an ULE SNDU to complete its decoding.
- *  Returns: >= 0: nr. of bytes consumed by next extension header
- *	     -1:   Mandatory extension header that is not recognized or TEST SNDU; discard.
- */
-static int handle_one_ule_extension( struct dvb_net_priv *p )
-{
-	/* Table of mandatory extension header handlers.  The header type is the index. */
-	static int (*ule_mandatory_ext_handlers[255])( struct dvb_net_priv *p ) =
-		{ [0] = ule_test_sndu, [1] = ule_bridged_sndu, [2] = NULL,  };
-
-	/* Table of optional extension header handlers.  The header type is the index. */
-	static int (*ule_optional_ext_handlers[255])( struct dvb_net_priv *p ) =
-		{ [0] = ule_exthdr_padding, [1] = NULL, };
-
-	int ext_len = 0;
-	unsigned char hlen = (p->ule_sndu_type & 0x0700) >> 8;
-	unsigned char htype = p->ule_sndu_type & 0x00FF;
-
-	/* Discriminate mandatory and optional extension headers. */
-	if (hlen == 0) {
-		/* Mandatory extension header */
-		if (ule_mandatory_ext_handlers[htype]) {
-			ext_len = ule_mandatory_ext_handlers[htype]( p );
-			if(ext_len >= 0) {
-				p->ule_next_hdr += ext_len;
-				if (!p->ule_bridged) {
-					p->ule_sndu_type = ntohs(*(__be16 *)p->ule_next_hdr);
-					p->ule_next_hdr += 2;
-				} else {
-					p->ule_sndu_type = ntohs(*(__be16 *)(p->ule_next_hdr + ((p->ule_dbit ? 2 : 3) * ETH_ALEN)));
-					/* This assures the extension handling loop will terminate. */
-				}
-			}
-			// else: extension handler failed or SNDU should be discarded
-		} else
-			ext_len = -1;	/* SNDU has to be discarded. */
-	} else {
-		/* Optional extension header.  Calculate the length. */
-		ext_len = hlen << 1;
-		/* Process the optional extension header according to its type. */
-		if (ule_optional_ext_handlers[htype])
-			(void)ule_optional_ext_handlers[htype]( p );
-		p->ule_next_hdr += ext_len;
-		p->ule_sndu_type = ntohs( *(__be16 *)(p->ule_next_hdr-2) );
-		/*
-		 * note: the length of the next header type is included in the
-		 * length of THIS optional extension header
-		 */
-	}
-
-	return ext_len;
-}
-
-static int handle_ule_extensions( struct dvb_net_priv *p )
-{
-	int total_ext_len = 0, l;
-
-	p->ule_next_hdr = p->ule_skb->data;
-	do {
-		l = handle_one_ule_extension( p );
-		if (l < 0)
-			return l;	/* Stop extension header processing and discard SNDU. */
-		total_ext_len += l;
-#ifdef ULE_DEBUG
-		dprintk("handle_ule_extensions: ule_next_hdr=%p, ule_sndu_type=%i, "
-			"l=%i, total_ext_len=%i\n", p->ule_next_hdr,
-			(int) p->ule_sndu_type, l, total_ext_len);
-#endif
-
-	} while (p->ule_sndu_type < 1536);
-
-	return total_ext_len;
-}
-
-
-/** Prepare for a new ULE SNDU: reset the decoder state. */
-static inline void reset_ule( struct dvb_net_priv *p )
-{
-	p->ule_skb = NULL;
-	p->ule_next_hdr = NULL;
-	p->ule_sndu_len = 0;
-	p->ule_sndu_type = 0;
-	p->ule_sndu_type_1 = 0;
-	p->ule_sndu_remain = 0;
-	p->ule_dbit = 0xFF;
-	p->ule_bridged = 0;
-}
-
-/**
- * Decode ULE SNDUs according to draft-ietf-ipdvb-ule-03.txt from a sequence of
- * TS cells of a single PID.
- */
-static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
-{
-	struct dvb_net_priv *priv = netdev_priv(dev);
-	unsigned long skipped = 0L;
-	const u8 *ts, *ts_end, *from_where = NULL;
-	u8 ts_remain = 0, how_much = 0, new_ts = 1;
-	struct ethhdr *ethh = NULL;
-	bool error = false;
-
-#ifdef ULE_DEBUG
-	/* The code inside ULE_DEBUG keeps a history of the last 100 TS cells processed. */
-	static unsigned char ule_hist[100*TS_SZ];
-	static unsigned char *ule_where = ule_hist, ule_dump;
-#endif
-
-	/* For all TS cells in current buffer.
-	 * Appearently, we are called for every single TS cell.
-	 */
-	for (ts = buf, ts_end = buf + buf_len; ts < ts_end; /* no default incr. */ ) {
-
-		if (new_ts) {
-			/* We are about to process a new TS cell. */
-
-#ifdef ULE_DEBUG
-			if (ule_where >= &ule_hist[100*TS_SZ]) ule_where = ule_hist;
-			memcpy( ule_where, ts, TS_SZ );
-			if (ule_dump) {
-				hexdump( ule_where, TS_SZ );
-				ule_dump = 0;
-			}
-			ule_where += TS_SZ;
-#endif
-
-			/* Check TS error conditions: sync_byte, transport_error_indicator, scrambling_control . */
-			if ((ts[0] != TS_SYNC) || (ts[1] & TS_TEI) || ((ts[3] & TS_SC) != 0)) {
-				printk(KERN_WARNING "%lu: Invalid TS cell: SYNC %#x, TEI %u, SC %#x.\n",
-				       priv->ts_count, ts[0], ts[1] & TS_TEI >> 7, ts[3] & 0xC0 >> 6);
-
-				/* Drop partly decoded SNDU, reset state, resync on PUSI. */
-				if (priv->ule_skb) {
-					dev_kfree_skb( priv->ule_skb );
-					/* Prepare for next SNDU. */
-					dev->stats.rx_errors++;
-					dev->stats.rx_frame_errors++;
-				}
-				reset_ule(priv);
-				priv->need_pusi = 1;
-
-				/* Continue with next TS cell. */
-				ts += TS_SZ;
-				priv->ts_count++;
-				continue;
-			}
-
-			ts_remain = 184;
-			from_where = ts + 4;
-		}
-		/* Synchronize on PUSI, if required. */
-		if (priv->need_pusi) {
-			if (ts[1] & TS_PUSI) {
-				/* Find beginning of first ULE SNDU in current TS cell. */
-				/* Synchronize continuity counter. */
-				priv->tscc = ts[3] & 0x0F;
-				/* There is a pointer field here. */
-				if (ts[4] > ts_remain) {
-					printk(KERN_ERR "%lu: Invalid ULE packet "
-					       "(pointer field %d)\n", priv->ts_count, ts[4]);
-					ts += TS_SZ;
-					priv->ts_count++;
-					continue;
-				}
-				/* Skip to destination of pointer field. */
-				from_where = &ts[5] + ts[4];
-				ts_remain -= 1 + ts[4];
-				skipped = 0;
-			} else {
-				skipped++;
-				ts += TS_SZ;
-				priv->ts_count++;
-				continue;
-			}
-		}
-
-		if (new_ts) {
-			/* Check continuity counter. */
-			if ((ts[3] & 0x0F) == priv->tscc)
-				priv->tscc = (priv->tscc + 1) & 0x0F;
-			else {
-				/* TS discontinuity handling: */
-				printk(KERN_WARNING "%lu: TS discontinuity: got %#x, "
-				       "expected %#x.\n", priv->ts_count, ts[3] & 0x0F, priv->tscc);
-				/* Drop partly decoded SNDU, reset state, resync on PUSI. */
-				if (priv->ule_skb) {
-					dev_kfree_skb( priv->ule_skb );
-					/* Prepare for next SNDU. */
-					// reset_ule(priv);  moved to below.
-					dev->stats.rx_errors++;
-					dev->stats.rx_frame_errors++;
-				}
-				reset_ule(priv);
-				/* skip to next PUSI. */
-				priv->need_pusi = 1;
-				continue;
-			}
-			/* If we still have an incomplete payload, but PUSI is
-			 * set; some TS cells are missing.
-			 * This is only possible here, if we missed exactly 16 TS
-			 * cells (continuity counter wrap). */
-			if (ts[1] & TS_PUSI) {
-				if (! priv->need_pusi) {
-					if (!(*from_where < (ts_remain-1)) || *from_where != priv->ule_sndu_remain) {
-						/* Pointer field is invalid.  Drop this TS cell and any started ULE SNDU. */
-						printk(KERN_WARNING "%lu: Invalid pointer "
-						       "field: %u.\n", priv->ts_count, *from_where);
-
-						/* Drop partly decoded SNDU, reset state, resync on PUSI. */
-						if (priv->ule_skb) {
-							error = true;
-							dev_kfree_skb(priv->ule_skb);
-						}
-
-						if (error || priv->ule_sndu_remain) {
-							dev->stats.rx_errors++;
-							dev->stats.rx_frame_errors++;
-							error = false;
-						}
-
-						reset_ule(priv);
-						priv->need_pusi = 1;
-						continue;
-					}
-					/* Skip pointer field (we're processing a
-					 * packed payload). */
-					from_where += 1;
-					ts_remain -= 1;
-				} else
-					priv->need_pusi = 0;
-
-				if (priv->ule_sndu_remain > 183) {
-					/* Current SNDU lacks more data than there could be available in the
-					 * current TS cell. */
-					dev->stats.rx_errors++;
-					dev->stats.rx_length_errors++;
-					printk(KERN_WARNING "%lu: Expected %d more SNDU bytes, but "
-					       "got PUSI (pf %d, ts_remain %d).  Flushing incomplete payload.\n",
-					       priv->ts_count, priv->ule_sndu_remain, ts[4], ts_remain);
-					dev_kfree_skb(priv->ule_skb);
-					/* Prepare for next SNDU. */
-					reset_ule(priv);
-					/* Resync: go to where pointer field points to: start of next ULE SNDU. */
-					from_where += ts[4];
-					ts_remain -= ts[4];
-				}
-			}
-		}
-
-		/* Check if new payload needs to be started. */
-		if (priv->ule_skb == NULL) {
-			/* Start a new payload with skb.
-			 * Find ULE header.  It is only guaranteed that the
-			 * length field (2 bytes) is contained in the current
-			 * TS.
-			 * Check ts_remain has to be >= 2 here. */
-			if (ts_remain < 2) {
-				printk(KERN_WARNING "Invalid payload packing: only %d "
-				       "bytes left in TS.  Resyncing.\n", ts_remain);
-				priv->ule_sndu_len = 0;
-				priv->need_pusi = 1;
-				ts += TS_SZ;
-				continue;
-			}
-
-			if (! priv->ule_sndu_len) {
-				/* Got at least two bytes, thus extrace the SNDU length. */
-				priv->ule_sndu_len = from_where[0] << 8 | from_where[1];
-				if (priv->ule_sndu_len & 0x8000) {
-					/* D-Bit is set: no dest mac present. */
-					priv->ule_sndu_len &= 0x7FFF;
-					priv->ule_dbit = 1;
-				} else
-					priv->ule_dbit = 0;
-
-				if (priv->ule_sndu_len < 5) {
-					printk(KERN_WARNING "%lu: Invalid ULE SNDU length %u. "
-					       "Resyncing.\n", priv->ts_count, priv->ule_sndu_len);
-					dev->stats.rx_errors++;
-					dev->stats.rx_length_errors++;
-					priv->ule_sndu_len = 0;
-					priv->need_pusi = 1;
-					new_ts = 1;
-					ts += TS_SZ;
-					priv->ts_count++;
-					continue;
-				}
-				ts_remain -= 2;	/* consume the 2 bytes SNDU length. */
-				from_where += 2;
-			}
-
-			priv->ule_sndu_remain = priv->ule_sndu_len + 2;
-			/*
-			 * State of current TS:
-			 *   ts_remain (remaining bytes in the current TS cell)
-			 *   0	ule_type is not available now, we need the next TS cell
-			 *   1	the first byte of the ule_type is present
-			 * >=2	full ULE header present, maybe some payload data as well.
-			 */
-			switch (ts_remain) {
-				case 1:
-					priv->ule_sndu_remain--;
-					priv->ule_sndu_type = from_where[0] << 8;
-					priv->ule_sndu_type_1 = 1; /* first byte of ule_type is set. */
-					ts_remain -= 1; from_where += 1;
-					/* Continue w/ next TS. */
-				case 0:
-					new_ts = 1;
-					ts += TS_SZ;
-					priv->ts_count++;
-					continue;
-
-				default: /* complete ULE header is present in current TS. */
-					/* Extract ULE type field. */
-					if (priv->ule_sndu_type_1) {
-						priv->ule_sndu_type_1 = 0;
-						priv->ule_sndu_type |= from_where[0];
-						from_where += 1; /* points to payload start. */
-						ts_remain -= 1;
-					} else {
-						/* Complete type is present in new TS. */
-						priv->ule_sndu_type = from_where[0] << 8 | from_where[1];
-						from_where += 2; /* points to payload start. */
-						ts_remain -= 2;
-					}
-					break;
-			}
-
-			/* Allocate the skb (decoder target buffer) with the correct size, as follows:
-			 * prepare for the largest case: bridged SNDU with MAC address (dbit = 0). */
-			priv->ule_skb = dev_alloc_skb( priv->ule_sndu_len + ETH_HLEN + ETH_ALEN );
-			if (priv->ule_skb == NULL) {
-				printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n",
-				       dev->name);
-				dev->stats.rx_dropped++;
-				return;
-			}
-
-			/* This includes the CRC32 _and_ dest mac, if !dbit. */
-			priv->ule_sndu_remain = priv->ule_sndu_len;
-			priv->ule_skb->dev = dev;
-			/* Leave space for Ethernet or bridged SNDU header (eth hdr plus one MAC addr). */
-			skb_reserve( priv->ule_skb, ETH_HLEN + ETH_ALEN );
-		}
-
-		/* Copy data into our current skb. */
-		how_much = min(priv->ule_sndu_remain, (int)ts_remain);
-		memcpy(skb_put(priv->ule_skb, how_much), from_where, how_much);
-		priv->ule_sndu_remain -= how_much;
-		ts_remain -= how_much;
-		from_where += how_much;
-
-		/* Check for complete payload. */
-		if (priv->ule_sndu_remain <= 0) {
-			/* Check CRC32, we've got it in our skb already. */
-			__be16 ulen = htons(priv->ule_sndu_len);
-			__be16 utype = htons(priv->ule_sndu_type);
-			const u8 *tail;
-			struct kvec iov[3] = {
-				{ &ulen, sizeof ulen },
-				{ &utype, sizeof utype },
-				{ priv->ule_skb->data, priv->ule_skb->len - 4 }
-			};
-			u32 ule_crc = ~0L, expected_crc;
-			if (priv->ule_dbit) {
-				/* Set D-bit for CRC32 verification,
-				 * if it was set originally. */
-				ulen |= htons(0x8000);
-			}
-
-			ule_crc = iov_crc32(ule_crc, iov, 3);
-			tail = skb_tail_pointer(priv->ule_skb);
-			expected_crc = *(tail - 4) << 24 |
-				       *(tail - 3) << 16 |
-				       *(tail - 2) << 8 |
-				       *(tail - 1);
-			if (ule_crc != expected_crc) {
-				printk(KERN_WARNING "%lu: CRC32 check FAILED: %08x / %08x, SNDU len %d type %#x, ts_remain %d, next 2: %x.\n",
-				       priv->ts_count, ule_crc, expected_crc, priv->ule_sndu_len, priv->ule_sndu_type, ts_remain, ts_remain > 2 ? *(unsigned short *)from_where : 0);
-
-#ifdef ULE_DEBUG
-				hexdump( iov[0].iov_base, iov[0].iov_len );
-				hexdump( iov[1].iov_base, iov[1].iov_len );
-				hexdump( iov[2].iov_base, iov[2].iov_len );
-
-				if (ule_where == ule_hist) {
-					hexdump( &ule_hist[98*TS_SZ], TS_SZ );
-					hexdump( &ule_hist[99*TS_SZ], TS_SZ );
-				} else if (ule_where == &ule_hist[TS_SZ]) {
-					hexdump( &ule_hist[99*TS_SZ], TS_SZ );
-					hexdump( ule_hist, TS_SZ );
-				} else {
-					hexdump( ule_where - TS_SZ - TS_SZ, TS_SZ );
-					hexdump( ule_where - TS_SZ, TS_SZ );
-				}
-				ule_dump = 1;
-#endif
-
-				dev->stats.rx_errors++;
-				dev->stats.rx_crc_errors++;
-				dev_kfree_skb(priv->ule_skb);
-			} else {
-				/* CRC32 verified OK. */
-				u8 dest_addr[ETH_ALEN];
-				static const u8 bc_addr[ETH_ALEN] =
-					{ [ 0 ... ETH_ALEN-1] = 0xff };
-
-				/* CRC32 was OK. Remove it from skb. */
-				priv->ule_skb->tail -= 4;
-				priv->ule_skb->len -= 4;
-
-				if (!priv->ule_dbit) {
-					/*
-					 * The destination MAC address is the
-					 * next data in the skb.  It comes
-					 * before any extension headers.
-					 *
-					 * Check if the payload of this SNDU
-					 * should be passed up the stack.
-					 */
-					register int drop = 0;
-					if (priv->rx_mode != RX_MODE_PROMISC) {
-						if (priv->ule_skb->data[0] & 0x01) {
-							/* multicast or broadcast */
-							if (memcmp(priv->ule_skb->data, bc_addr, ETH_ALEN)) {
-								/* multicast */
-								if (priv->rx_mode == RX_MODE_MULTI) {
-									int i;
-									for(i = 0; i < priv->multi_num && memcmp(priv->ule_skb->data, priv->multi_macs[i], ETH_ALEN); i++)
-										;
-									if (i == priv->multi_num)
-										drop = 1;
-								} else if (priv->rx_mode != RX_MODE_ALL_MULTI)
-									drop = 1; /* no broadcast; */
-								/* else: all multicast mode: accept all multicast packets */
-							}
-							/* else: broadcast */
-						}
-						else if (memcmp(priv->ule_skb->data, dev->dev_addr, ETH_ALEN))
-							drop = 1;
-						/* else: destination address matches the MAC address of our receiver device */
-					}
-					/* else: promiscuous mode; pass everything up the stack */
-
-					if (drop) {
-#ifdef ULE_DEBUG
-						dprintk("Dropping SNDU: MAC destination address does not match: dest addr: "MAC_ADDR_PRINTFMT", dev addr: "MAC_ADDR_PRINTFMT"\n",
-							MAX_ADDR_PRINTFMT_ARGS(priv->ule_skb->data), MAX_ADDR_PRINTFMT_ARGS(dev->dev_addr));
-#endif
-						dev_kfree_skb(priv->ule_skb);
-						goto sndu_done;
-					}
-					else
-					{
-						skb_copy_from_linear_data(priv->ule_skb,
-							      dest_addr,
-							      ETH_ALEN);
-						skb_pull(priv->ule_skb, ETH_ALEN);
-					}
-				}
-
-				/* Handle ULE Extension Headers. */
-				if (priv->ule_sndu_type < 1536) {
-					/* There is an extension header.  Handle it accordingly. */
-					int l = handle_ule_extensions(priv);
-					if (l < 0) {
-						/* Mandatory extension header unknown or TEST SNDU.  Drop it. */
-						// printk( KERN_WARNING "Dropping SNDU, extension headers.\n" );
-						dev_kfree_skb(priv->ule_skb);
-						goto sndu_done;
-					}
-					skb_pull(priv->ule_skb, l);
-				}
-
-				/*
-				 * Construct/assure correct ethernet header.
-				 * Note: in bridged mode (priv->ule_bridged !=
-				 * 0) we already have the (original) ethernet
-				 * header at the start of the payload (after
-				 * optional dest. address and any extension
-				 * headers).
-				 */
-
-				if (!priv->ule_bridged) {
-					skb_push(priv->ule_skb, ETH_HLEN);
-					ethh = (struct ethhdr *)priv->ule_skb->data;
-					if (!priv->ule_dbit) {
-						 /* dest_addr buffer is only valid if priv->ule_dbit == 0 */
-						memcpy(ethh->h_dest, dest_addr, ETH_ALEN);
-						memset(ethh->h_source, 0, ETH_ALEN);
-					}
-					else /* zeroize source and dest */
-						memset( ethh, 0, ETH_ALEN*2 );
-
-					ethh->h_proto = htons(priv->ule_sndu_type);
-				}
-				/* else:  skb is in correct state; nothing to do. */
-				priv->ule_bridged = 0;
-
-				/* Stuff into kernel's protocol stack. */
-				priv->ule_skb->protocol = dvb_net_eth_type_trans(priv->ule_skb, dev);
-				/* If D-bit is set (i.e. destination MAC address not present),
-				 * receive the packet anyhow. */
-				/* if (priv->ule_dbit && skb->pkt_type == PACKET_OTHERHOST)
-					priv->ule_skb->pkt_type = PACKET_HOST; */
-				dev->stats.rx_packets++;
-				dev->stats.rx_bytes += priv->ule_skb->len;
-				netif_rx(priv->ule_skb);
-			}
-			sndu_done:
-			/* Prepare for next SNDU. */
-			reset_ule(priv);
-		}
-
-		/* More data in current TS (look at the bytes following the CRC32)? */
-		if (ts_remain >= 2 && *((unsigned short *)from_where) != 0xFFFF) {
-			/* Next ULE SNDU starts right there. */
-			new_ts = 0;
-			priv->ule_skb = NULL;
-			priv->ule_sndu_type_1 = 0;
-			priv->ule_sndu_len = 0;
-			// printk(KERN_WARNING "More data in current TS: [%#x %#x %#x %#x]\n",
-			//	*(from_where + 0), *(from_where + 1),
-			//	*(from_where + 2), *(from_where + 3));
-			// printk(KERN_WARNING "ts @ %p, stopped @ %p:\n", ts, from_where + 0);
-			// hexdump(ts, 188);
-		} else {
-			new_ts = 1;
-			ts += TS_SZ;
-			priv->ts_count++;
-			if (priv->ule_skb == NULL) {
-				priv->need_pusi = 1;
-				priv->ule_sndu_type_1 = 0;
-				priv->ule_sndu_len = 0;
-			}
-		}
-	}	/* for all available TS cells */
-}
-
-static int dvb_net_ts_callback(const u8 *buffer1, size_t buffer1_len,
-			       const u8 *buffer2, size_t buffer2_len,
-			       struct dmx_ts_feed *feed, enum dmx_success success)
-{
-	struct net_device *dev = feed->priv;
-
-	if (buffer2)
-		printk(KERN_WARNING "buffer2 not NULL: %p.\n", buffer2);
-	if (buffer1_len > 32768)
-		printk(KERN_WARNING "length > 32k: %zu.\n", buffer1_len);
-	/* printk("TS callback: %u bytes, %u TS cells @ %p.\n",
-		  buffer1_len, buffer1_len / TS_SZ, buffer1); */
-	dvb_net_ule(dev, buffer1, buffer1_len);
-	return 0;
-}
-
-
-static void dvb_net_sec(struct net_device *dev,
-			const u8 *pkt, int pkt_len)
-{
-	u8 *eth;
-	struct sk_buff *skb;
-	struct net_device_stats *stats = &dev->stats;
-	int snap = 0;
-
-	/* note: pkt_len includes a 32bit checksum */
-	if (pkt_len < 16) {
-		printk("%s: IP/MPE packet length = %d too small.\n",
-			dev->name, pkt_len);
-		stats->rx_errors++;
-		stats->rx_length_errors++;
-		return;
-	}
-/* it seems some ISPs manage to screw up here, so we have to
- * relax the error checks... */
-#if 0
-	if ((pkt[5] & 0xfd) != 0xc1) {
-		/* drop scrambled or broken packets */
-#else
-	if ((pkt[5] & 0x3c) != 0x00) {
-		/* drop scrambled */
-#endif
-		stats->rx_errors++;
-		stats->rx_crc_errors++;
-		return;
-	}
-	if (pkt[5] & 0x02) {
-		/* handle LLC/SNAP, see rfc-1042 */
-		if (pkt_len < 24 || memcmp(&pkt[12], "\xaa\xaa\x03\0\0\0", 6)) {
-			stats->rx_dropped++;
-			return;
-		}
-		snap = 8;
-	}
-	if (pkt[7]) {
-		/* FIXME: assemble datagram from multiple sections */
-		stats->rx_errors++;
-		stats->rx_frame_errors++;
-		return;
-	}
-
-	/* we have 14 byte ethernet header (ip header follows);
-	 * 12 byte MPE header; 4 byte checksum; + 2 byte alignment, 8 byte LLC/SNAP
-	 */
-	if (!(skb = dev_alloc_skb(pkt_len - 4 - 12 + 14 + 2 - snap))) {
-		//printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
-		stats->rx_dropped++;
-		return;
-	}
-	skb_reserve(skb, 2);    /* longword align L3 header */
-	skb->dev = dev;
-
-	/* copy L3 payload */
-	eth = (u8 *) skb_put(skb, pkt_len - 12 - 4 + 14 - snap);
-	memcpy(eth + 14, pkt + 12 + snap, pkt_len - 12 - 4 - snap);
-
-	/* create ethernet header: */
-	eth[0]=pkt[0x0b];
-	eth[1]=pkt[0x0a];
-	eth[2]=pkt[0x09];
-	eth[3]=pkt[0x08];
-	eth[4]=pkt[0x04];
-	eth[5]=pkt[0x03];
-
-	eth[6]=eth[7]=eth[8]=eth[9]=eth[10]=eth[11]=0;
-
-	if (snap) {
-		eth[12] = pkt[18];
-		eth[13] = pkt[19];
-	} else {
-		/* protocol numbers are from rfc-1700 or
-		 * http://www.iana.org/assignments/ethernet-numbers
-		 */
-		if (pkt[12] >> 4 == 6) { /* version field from IP header */
-			eth[12] = 0x86;	/* IPv6 */
-			eth[13] = 0xdd;
-		} else {
-			eth[12] = 0x08;	/* IPv4 */
-			eth[13] = 0x00;
-		}
-	}
-
-	skb->protocol = dvb_net_eth_type_trans(skb, dev);
-
-	stats->rx_packets++;
-	stats->rx_bytes+=skb->len;
-	netif_rx(skb);
-}
-
-static int dvb_net_sec_callback(const u8 *buffer1, size_t buffer1_len,
-		 const u8 *buffer2, size_t buffer2_len,
-		 struct dmx_section_filter *filter,
-		 enum dmx_success success)
-{
-	struct net_device *dev = filter->priv;
-
-	/**
-	 * we rely on the DVB API definition where exactly one complete
-	 * section is delivered in buffer1
-	 */
-	dvb_net_sec (dev, buffer1, buffer1_len);
-	return 0;
-}
-
-static int dvb_net_tx(struct sk_buff *skb, struct net_device *dev)
-{
-	dev_kfree_skb(skb);
-	return NETDEV_TX_OK;
-}
-
-static u8 mask_normal[6]={0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
-static u8 mask_allmulti[6]={0xff, 0xff, 0xff, 0x00, 0x00, 0x00};
-static u8 mac_allmulti[6]={0x01, 0x00, 0x5e, 0x00, 0x00, 0x00};
-static u8 mask_promisc[6]={0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-
-static int dvb_net_filter_sec_set(struct net_device *dev,
-		   struct dmx_section_filter **secfilter,
-		   u8 *mac, u8 *mac_mask)
-{
-	struct dvb_net_priv *priv = netdev_priv(dev);
-	int ret;
-
-	*secfilter=NULL;
-	ret = priv->secfeed->allocate_filter(priv->secfeed, secfilter);
-	if (ret<0) {
-		printk("%s: could not get filter\n", dev->name);
-		return ret;
-	}
-
-	(*secfilter)->priv=(void *) dev;
-
-	memset((*secfilter)->filter_value, 0x00, DMX_MAX_FILTER_SIZE);
-	memset((*secfilter)->filter_mask,  0x00, DMX_MAX_FILTER_SIZE);
-	memset((*secfilter)->filter_mode,  0xff, DMX_MAX_FILTER_SIZE);
-
-	(*secfilter)->filter_value[0]=0x3e;
-	(*secfilter)->filter_value[3]=mac[5];
-	(*secfilter)->filter_value[4]=mac[4];
-	(*secfilter)->filter_value[8]=mac[3];
-	(*secfilter)->filter_value[9]=mac[2];
-	(*secfilter)->filter_value[10]=mac[1];
-	(*secfilter)->filter_value[11]=mac[0];
-
-	(*secfilter)->filter_mask[0] = 0xff;
-	(*secfilter)->filter_mask[3] = mac_mask[5];
-	(*secfilter)->filter_mask[4] = mac_mask[4];
-	(*secfilter)->filter_mask[8] = mac_mask[3];
-	(*secfilter)->filter_mask[9] = mac_mask[2];
-	(*secfilter)->filter_mask[10] = mac_mask[1];
-	(*secfilter)->filter_mask[11]=mac_mask[0];
-
-	dprintk("%s: filter mac=%pM\n", dev->name, mac);
-	dprintk("%s: filter mask=%pM\n", dev->name, mac_mask);
-
-	return 0;
-}
-
-static int dvb_net_feed_start(struct net_device *dev)
-{
-	int ret = 0, i;
-	struct dvb_net_priv *priv = netdev_priv(dev);
-	struct dmx_demux *demux = priv->demux;
-	unsigned char *mac = (unsigned char *) dev->dev_addr;
-
-	dprintk("%s: rx_mode %i\n", __func__, priv->rx_mode);
-	mutex_lock(&priv->mutex);
-	if (priv->tsfeed || priv->secfeed || priv->secfilter || priv->multi_secfilter[0])
-		printk("%s: BUG %d\n", __func__, __LINE__);
-
-	priv->secfeed=NULL;
-	priv->secfilter=NULL;
-	priv->tsfeed = NULL;
-
-	if (priv->feedtype == DVB_NET_FEEDTYPE_MPE) {
-		dprintk("%s: alloc secfeed\n", __func__);
-		ret=demux->allocate_section_feed(demux, &priv->secfeed,
-					 dvb_net_sec_callback);
-		if (ret<0) {
-			printk("%s: could not allocate section feed\n", dev->name);
-			goto error;
-		}
-
-		ret = priv->secfeed->set(priv->secfeed, priv->pid, 32768, 1);
-
-		if (ret<0) {
-			printk("%s: could not set section feed\n", dev->name);
-			priv->demux->release_section_feed(priv->demux, priv->secfeed);
-			priv->secfeed=NULL;
-			goto error;
-		}
-
-		if (priv->rx_mode != RX_MODE_PROMISC) {
-			dprintk("%s: set secfilter\n", __func__);
-			dvb_net_filter_sec_set(dev, &priv->secfilter, mac, mask_normal);
-		}
-
-		switch (priv->rx_mode) {
-		case RX_MODE_MULTI:
-			for (i = 0; i < priv->multi_num; i++) {
-				dprintk("%s: set multi_secfilter[%d]\n", __func__, i);
-				dvb_net_filter_sec_set(dev, &priv->multi_secfilter[i],
-						       priv->multi_macs[i], mask_normal);
-			}
-			break;
-		case RX_MODE_ALL_MULTI:
-			priv->multi_num=1;
-			dprintk("%s: set multi_secfilter[0]\n", __func__);
-			dvb_net_filter_sec_set(dev, &priv->multi_secfilter[0],
-					       mac_allmulti, mask_allmulti);
-			break;
-		case RX_MODE_PROMISC:
-			priv->multi_num=0;
-			dprintk("%s: set secfilter\n", __func__);
-			dvb_net_filter_sec_set(dev, &priv->secfilter, mac, mask_promisc);
-			break;
-		}
-
-		dprintk("%s: start filtering\n", __func__);
-		priv->secfeed->start_filtering(priv->secfeed);
-	} else if (priv->feedtype == DVB_NET_FEEDTYPE_ULE) {
-		struct timespec timeout = { 0, 10000000 }; // 10 msec
-
-		/* we have payloads encapsulated in TS */
-		dprintk("%s: alloc tsfeed\n", __func__);
-		ret = demux->allocate_ts_feed(demux, &priv->tsfeed, dvb_net_ts_callback);
-		if (ret < 0) {
-			printk("%s: could not allocate ts feed\n", dev->name);
-			goto error;
-		}
-
-		/* Set netdevice pointer for ts decaps callback. */
-		priv->tsfeed->priv = (void *)dev;
-		ret = priv->tsfeed->set(priv->tsfeed,
-					priv->pid, /* pid */
-					TS_PACKET, /* type */
-					DMX_TS_PES_OTHER, /* pes type */
-					32768,     /* circular buffer size */
-					timeout    /* timeout */
-					);
-
-		if (ret < 0) {
-			printk("%s: could not set ts feed\n", dev->name);
-			priv->demux->release_ts_feed(priv->demux, priv->tsfeed);
-			priv->tsfeed = NULL;
-			goto error;
-		}
-
-		dprintk("%s: start filtering\n", __func__);
-		priv->tsfeed->start_filtering(priv->tsfeed);
-	} else
-		ret = -EINVAL;
-
-error:
-	mutex_unlock(&priv->mutex);
-	return ret;
-}
-
-static int dvb_net_feed_stop(struct net_device *dev)
-{
-	struct dvb_net_priv *priv = netdev_priv(dev);
-	int i, ret = 0;
-
-	dprintk("%s\n", __func__);
-	mutex_lock(&priv->mutex);
-	if (priv->feedtype == DVB_NET_FEEDTYPE_MPE) {
-		if (priv->secfeed) {
-			if (priv->secfeed->is_filtering) {
-				dprintk("%s: stop secfeed\n", __func__);
-				priv->secfeed->stop_filtering(priv->secfeed);
-			}
-
-			if (priv->secfilter) {
-				dprintk("%s: release secfilter\n", __func__);
-				priv->secfeed->release_filter(priv->secfeed,
-							      priv->secfilter);
-				priv->secfilter=NULL;
-			}
-
-			for (i=0; i<priv->multi_num; i++) {
-				if (priv->multi_secfilter[i]) {
-					dprintk("%s: release multi_filter[%d]\n",
-						__func__, i);
-					priv->secfeed->release_filter(priv->secfeed,
-								      priv->multi_secfilter[i]);
-					priv->multi_secfilter[i] = NULL;
-				}
-			}
-
-			priv->demux->release_section_feed(priv->demux, priv->secfeed);
-			priv->secfeed = NULL;
-		} else
-			printk("%s: no feed to stop\n", dev->name);
-	} else if (priv->feedtype == DVB_NET_FEEDTYPE_ULE) {
-		if (priv->tsfeed) {
-			if (priv->tsfeed->is_filtering) {
-				dprintk("%s: stop tsfeed\n", __func__);
-				priv->tsfeed->stop_filtering(priv->tsfeed);
-			}
-			priv->demux->release_ts_feed(priv->demux, priv->tsfeed);
-			priv->tsfeed = NULL;
-		}
-		else
-			printk("%s: no ts feed to stop\n", dev->name);
-	} else
-		ret = -EINVAL;
-	mutex_unlock(&priv->mutex);
-	return ret;
-}
-
-
-static int dvb_set_mc_filter(struct net_device *dev, unsigned char *addr)
-{
-	struct dvb_net_priv *priv = netdev_priv(dev);
-
-	if (priv->multi_num == DVB_NET_MULTICAST_MAX)
-		return -ENOMEM;
-
-	memcpy(priv->multi_macs[priv->multi_num], addr, ETH_ALEN);
-
-	priv->multi_num++;
-	return 0;
-}
-
-
-static void wq_set_multicast_list (struct work_struct *work)
-{
-	struct dvb_net_priv *priv =
-		container_of(work, struct dvb_net_priv, set_multicast_list_wq);
-	struct net_device *dev = priv->net;
-
-	dvb_net_feed_stop(dev);
-	priv->rx_mode = RX_MODE_UNI;
-	netif_addr_lock_bh(dev);
-
-	if (dev->flags & IFF_PROMISC) {
-		dprintk("%s: promiscuous mode\n", dev->name);
-		priv->rx_mode = RX_MODE_PROMISC;
-	} else if ((dev->flags & IFF_ALLMULTI)) {
-		dprintk("%s: allmulti mode\n", dev->name);
-		priv->rx_mode = RX_MODE_ALL_MULTI;
-	} else if (!netdev_mc_empty(dev)) {
-		struct netdev_hw_addr *ha;
-
-		dprintk("%s: set_mc_list, %d entries\n",
-			dev->name, netdev_mc_count(dev));
-
-		priv->rx_mode = RX_MODE_MULTI;
-		priv->multi_num = 0;
-
-		netdev_for_each_mc_addr(ha, dev)
-			dvb_set_mc_filter(dev, ha->addr);
-	}
-
-	netif_addr_unlock_bh(dev);
-	dvb_net_feed_start(dev);
-}
-
-
-static void dvb_net_set_multicast_list (struct net_device *dev)
-{
-	struct dvb_net_priv *priv = netdev_priv(dev);
-	schedule_work(&priv->set_multicast_list_wq);
-}
-
-
-static void wq_restart_net_feed (struct work_struct *work)
-{
-	struct dvb_net_priv *priv =
-		container_of(work, struct dvb_net_priv, restart_net_feed_wq);
-	struct net_device *dev = priv->net;
-
-	if (netif_running(dev)) {
-		dvb_net_feed_stop(dev);
-		dvb_net_feed_start(dev);
-	}
-}
-
-
-static int dvb_net_set_mac (struct net_device *dev, void *p)
-{
-	struct dvb_net_priv *priv = netdev_priv(dev);
-	struct sockaddr *addr=p;
-
-	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-
-	if (netif_running(dev))
-		schedule_work(&priv->restart_net_feed_wq);
-
-	return 0;
-}
-
-
-static int dvb_net_open(struct net_device *dev)
-{
-	struct dvb_net_priv *priv = netdev_priv(dev);
-
-	priv->in_use++;
-	dvb_net_feed_start(dev);
-	return 0;
-}
-
-
-static int dvb_net_stop(struct net_device *dev)
-{
-	struct dvb_net_priv *priv = netdev_priv(dev);
-
-	priv->in_use--;
-	return dvb_net_feed_stop(dev);
-}
-
-static const struct header_ops dvb_header_ops = {
-	.create		= eth_header,
-	.parse		= eth_header_parse,
-	.rebuild	= eth_rebuild_header,
-};
-
-
-static const struct net_device_ops dvb_netdev_ops = {
-	.ndo_open		= dvb_net_open,
-	.ndo_stop		= dvb_net_stop,
-	.ndo_start_xmit		= dvb_net_tx,
-	.ndo_set_rx_mode	= dvb_net_set_multicast_list,
-	.ndo_set_mac_address    = dvb_net_set_mac,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-static void dvb_net_setup(struct net_device *dev)
-{
-	ether_setup(dev);
-
-	dev->header_ops		= &dvb_header_ops;
-	dev->netdev_ops		= &dvb_netdev_ops;
-	dev->mtu		= 4096;
-
-	dev->flags |= IFF_NOARP;
-}
-
-static int get_if(struct dvb_net *dvbnet)
-{
-	int i;
-
-	for (i=0; i<DVB_NET_DEVICES_MAX; i++)
-		if (!dvbnet->state[i])
-			break;
-
-	if (i == DVB_NET_DEVICES_MAX)
-		return -1;
-
-	dvbnet->state[i]=1;
-	return i;
-}
-
-static int dvb_net_add_if(struct dvb_net *dvbnet, u16 pid, u8 feedtype)
-{
-	struct net_device *net;
-	struct dvb_net_priv *priv;
-	int result;
-	int if_num;
-
-	if (feedtype != DVB_NET_FEEDTYPE_MPE && feedtype != DVB_NET_FEEDTYPE_ULE)
-		return -EINVAL;
-	if ((if_num = get_if(dvbnet)) < 0)
-		return -EINVAL;
-
-	net = alloc_netdev(sizeof(struct dvb_net_priv), "dvb", dvb_net_setup);
-	if (!net)
-		return -ENOMEM;
-
-	if (dvbnet->dvbdev->id)
-		snprintf(net->name, IFNAMSIZ, "dvb%d%u%d",
-			 dvbnet->dvbdev->adapter->num, dvbnet->dvbdev->id, if_num);
-	else
-		/* compatibility fix to keep dvb0_0 format */
-		snprintf(net->name, IFNAMSIZ, "dvb%d_%d",
-			 dvbnet->dvbdev->adapter->num, if_num);
-
-	net->addr_len = 6;
-	memcpy(net->dev_addr, dvbnet->dvbdev->adapter->proposed_mac, 6);
-
-	dvbnet->device[if_num] = net;
-
-	priv = netdev_priv(net);
-	priv->net = net;
-	priv->demux = dvbnet->demux;
-	priv->pid = pid;
-	priv->rx_mode = RX_MODE_UNI;
-	priv->need_pusi = 1;
-	priv->tscc = 0;
-	priv->feedtype = feedtype;
-	reset_ule(priv);
-
-	INIT_WORK(&priv->set_multicast_list_wq, wq_set_multicast_list);
-	INIT_WORK(&priv->restart_net_feed_wq, wq_restart_net_feed);
-	mutex_init(&priv->mutex);
-
-	net->base_addr = pid;
-
-	if ((result = register_netdev(net)) < 0) {
-		dvbnet->device[if_num] = NULL;
-		free_netdev(net);
-		return result;
-	}
-	printk("dvb_net: created network interface %s\n", net->name);
-
-	return if_num;
-}
-
-static int dvb_net_remove_if(struct dvb_net *dvbnet, unsigned long num)
-{
-	struct net_device *net = dvbnet->device[num];
-	struct dvb_net_priv *priv;
-
-	if (!dvbnet->state[num])
-		return -EINVAL;
-	priv = netdev_priv(net);
-	if (priv->in_use)
-		return -EBUSY;
-
-	dvb_net_stop(net);
-	flush_work(&priv->set_multicast_list_wq);
-	flush_work(&priv->restart_net_feed_wq);
-	printk("dvb_net: removed network interface %s\n", net->name);
-	unregister_netdev(net);
-	dvbnet->state[num]=0;
-	dvbnet->device[num] = NULL;
-	free_netdev(net);
-
-	return 0;
-}
-
-static int dvb_net_do_ioctl(struct file *file,
-		  unsigned int cmd, void *parg)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dvb_net *dvbnet = dvbdev->priv;
-
-	if (((file->f_flags&O_ACCMODE)==O_RDONLY))
-		return -EPERM;
-
-	switch (cmd) {
-	case NET_ADD_IF:
-	{
-		struct dvb_net_if *dvbnetif = parg;
-		int result;
-
-		if (!capable(CAP_SYS_ADMIN))
-			return -EPERM;
-
-		if (!try_module_get(dvbdev->adapter->module))
-			return -EPERM;
-
-		result=dvb_net_add_if(dvbnet, dvbnetif->pid, dvbnetif->feedtype);
-		if (result<0) {
-			module_put(dvbdev->adapter->module);
-			return result;
-		}
-		dvbnetif->if_num=result;
-		break;
-	}
-	case NET_GET_IF:
-	{
-		struct net_device *netdev;
-		struct dvb_net_priv *priv_data;
-		struct dvb_net_if *dvbnetif = parg;
-
-		if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX ||
-		    !dvbnet->state[dvbnetif->if_num])
-			return -EINVAL;
-
-		netdev = dvbnet->device[dvbnetif->if_num];
-
-		priv_data = netdev_priv(netdev);
-		dvbnetif->pid=priv_data->pid;
-		dvbnetif->feedtype=priv_data->feedtype;
-		break;
-	}
-	case NET_REMOVE_IF:
-	{
-		int ret;
-
-		if (!capable(CAP_SYS_ADMIN))
-			return -EPERM;
-		if ((unsigned long) parg >= DVB_NET_DEVICES_MAX)
-			return -EINVAL;
-		ret = dvb_net_remove_if(dvbnet, (unsigned long) parg);
-		if (!ret)
-			module_put(dvbdev->adapter->module);
-		return ret;
-	}
-
-	/* binary compatibility cruft */
-	case __NET_ADD_IF_OLD:
-	{
-		struct __dvb_net_if_old *dvbnetif = parg;
-		int result;
-
-		if (!capable(CAP_SYS_ADMIN))
-			return -EPERM;
-
-		if (!try_module_get(dvbdev->adapter->module))
-			return -EPERM;
-
-		result=dvb_net_add_if(dvbnet, dvbnetif->pid, DVB_NET_FEEDTYPE_MPE);
-		if (result<0) {
-			module_put(dvbdev->adapter->module);
-			return result;
-		}
-		dvbnetif->if_num=result;
-		break;
-	}
-	case __NET_GET_IF_OLD:
-	{
-		struct net_device *netdev;
-		struct dvb_net_priv *priv_data;
-		struct __dvb_net_if_old *dvbnetif = parg;
-
-		if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX ||
-		    !dvbnet->state[dvbnetif->if_num])
-			return -EINVAL;
-
-		netdev = dvbnet->device[dvbnetif->if_num];
-
-		priv_data = netdev_priv(netdev);
-		dvbnetif->pid=priv_data->pid;
-		break;
-	}
-	default:
-		return -ENOTTY;
-	}
-	return 0;
-}
-
-static long dvb_net_ioctl(struct file *file,
-	      unsigned int cmd, unsigned long arg)
-{
-	return dvb_usercopy(file, cmd, arg, dvb_net_do_ioctl);
-}
-
-static int dvb_net_close(struct inode *inode, struct file *file)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct dvb_net *dvbnet = dvbdev->priv;
-
-	dvb_generic_release(inode, file);
-
-	if(dvbdev->users == 1 && dvbnet->exit == 1) {
-		fops_put(file->f_op);
-		file->f_op = NULL;
-		wake_up(&dvbdev->wait_queue);
-	}
-	return 0;
-}
-
-
-static const struct file_operations dvb_net_fops = {
-	.owner = THIS_MODULE,
-	.unlocked_ioctl = dvb_net_ioctl,
-	.open =	dvb_generic_open,
-	.release = dvb_net_close,
-	.llseek = noop_llseek,
-};
-
-static struct dvb_device dvbdev_net = {
-	.priv = NULL,
-	.users = 1,
-	.writers = 1,
-	.fops = &dvb_net_fops,
-};
-
-
-void dvb_net_release (struct dvb_net *dvbnet)
-{
-	int i;
-
-	dvbnet->exit = 1;
-	if (dvbnet->dvbdev->users < 1)
-		wait_event(dvbnet->dvbdev->wait_queue,
-				dvbnet->dvbdev->users==1);
-
-	dvb_unregister_device(dvbnet->dvbdev);
-
-	for (i=0; i<DVB_NET_DEVICES_MAX; i++) {
-		if (!dvbnet->state[i])
-			continue;
-		dvb_net_remove_if(dvbnet, i);
-	}
-}
-EXPORT_SYMBOL(dvb_net_release);
-
-
-int dvb_net_init (struct dvb_adapter *adap, struct dvb_net *dvbnet,
-		  struct dmx_demux *dmx)
-{
-	int i;
-
-	dvbnet->demux = dmx;
-
-	for (i=0; i<DVB_NET_DEVICES_MAX; i++)
-		dvbnet->state[i] = 0;
-
-	return dvb_register_device(adap, &dvbnet->dvbdev, &dvbdev_net,
-			     dvbnet, DVB_DEVICE_NET);
-}
-EXPORT_SYMBOL(dvb_net_init);
diff --git a/drivers/media/dvb/dvb-core/dvb_net.h b/drivers/media/dvb/dvb-core/dvb_net.h
deleted file mode 100644
index 1e53acd..0000000
--- a/drivers/media/dvb/dvb-core/dvb_net.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * dvb_net.h
- *
- * Copyright (C) 2001 Ralph Metzler for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#ifndef _DVB_NET_H_
-#define _DVB_NET_H_
-
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/inetdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#include "dvbdev.h"
-
-#define DVB_NET_DEVICES_MAX 10
-
-#ifdef CONFIG_DVB_NET
-
-struct dvb_net {
-	struct dvb_device *dvbdev;
-	struct net_device *device[DVB_NET_DEVICES_MAX];
-	int state[DVB_NET_DEVICES_MAX];
-	unsigned int exit:1;
-	struct dmx_demux *demux;
-};
-
-void dvb_net_release(struct dvb_net *);
-int  dvb_net_init(struct dvb_adapter *, struct dvb_net *, struct dmx_demux *);
-
-#else
-
-struct dvb_net {
-	struct dvb_device *dvbdev;
-};
-
-static inline void dvb_net_release(struct dvb_net *dvbnet)
-{
-}
-
-static inline int dvb_net_init(struct dvb_adapter *adap,
-			       struct dvb_net *dvbnet, struct dmx_demux *dmx)
-{
-	return 0;
-}
-
-#endif /* ifdef CONFIG_DVB_NET */
-
-#endif
diff --git a/drivers/media/dvb/dvb-core/dvb_ringbuffer.c b/drivers/media/dvb/dvb-core/dvb_ringbuffer.c
deleted file mode 100644
index a5712cd..0000000
--- a/drivers/media/dvb/dvb-core/dvb_ringbuffer.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- *
- * dvb_ringbuffer.c: ring buffer implementation for the dvb driver
- *
- * Copyright (C) 2003 Oliver Endriss
- * Copyright (C) 2004 Andrew de Quincey
- *
- * based on code originally found in av7110.c & dvb_ci.c:
- * Copyright (C) 1999-2003 Ralph  Metzler
- *                       & Marcus Metzler for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <asm/uaccess.h>
-
-#include "dvb_ringbuffer.h"
-
-#define PKT_READY 0
-#define PKT_DISPOSED 1
-
-
-void dvb_ringbuffer_init(struct dvb_ringbuffer *rbuf, void *data, size_t len)
-{
-	rbuf->pread=rbuf->pwrite=0;
-	rbuf->data=data;
-	rbuf->size=len;
-	rbuf->error=0;
-
-	init_waitqueue_head(&rbuf->queue);
-
-	spin_lock_init(&(rbuf->lock));
-}
-
-
-
-int dvb_ringbuffer_empty(struct dvb_ringbuffer *rbuf)
-{
-	return (rbuf->pread==rbuf->pwrite);
-}
-
-
-
-ssize_t dvb_ringbuffer_free(struct dvb_ringbuffer *rbuf)
-{
-	ssize_t free;
-
-	free = rbuf->pread - rbuf->pwrite;
-	if (free <= 0)
-		free += rbuf->size;
-	return free-1;
-}
-
-
-
-ssize_t dvb_ringbuffer_avail(struct dvb_ringbuffer *rbuf)
-{
-	ssize_t avail;
-
-	avail = rbuf->pwrite - rbuf->pread;
-	if (avail < 0)
-		avail += rbuf->size;
-	return avail;
-}
-
-
-
-void dvb_ringbuffer_flush(struct dvb_ringbuffer *rbuf)
-{
-	rbuf->pread = rbuf->pwrite;
-	rbuf->error = 0;
-}
-EXPORT_SYMBOL(dvb_ringbuffer_flush);
-
-void dvb_ringbuffer_reset(struct dvb_ringbuffer *rbuf)
-{
-	rbuf->pread = rbuf->pwrite = 0;
-	rbuf->error = 0;
-}
-
-void dvb_ringbuffer_flush_spinlock_wakeup(struct dvb_ringbuffer *rbuf)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&rbuf->lock, flags);
-	dvb_ringbuffer_flush(rbuf);
-	spin_unlock_irqrestore(&rbuf->lock, flags);
-
-	wake_up(&rbuf->queue);
-}
-
-ssize_t dvb_ringbuffer_read_user(struct dvb_ringbuffer *rbuf, u8 __user *buf, size_t len)
-{
-	size_t todo = len;
-	size_t split;
-
-	split = (rbuf->pread + len > rbuf->size) ? rbuf->size - rbuf->pread : 0;
-	if (split > 0) {
-		if (copy_to_user(buf, rbuf->data+rbuf->pread, split))
-			return -EFAULT;
-		buf += split;
-		todo -= split;
-		rbuf->pread = 0;
-	}
-	if (copy_to_user(buf, rbuf->data+rbuf->pread, todo))
-		return -EFAULT;
-
-	rbuf->pread = (rbuf->pread + todo) % rbuf->size;
-
-	return len;
-}
-
-void dvb_ringbuffer_read(struct dvb_ringbuffer *rbuf, u8 *buf, size_t len)
-{
-	size_t todo = len;
-	size_t split;
-
-	split = (rbuf->pread + len > rbuf->size) ? rbuf->size - rbuf->pread : 0;
-	if (split > 0) {
-		memcpy(buf, rbuf->data+rbuf->pread, split);
-		buf += split;
-		todo -= split;
-		rbuf->pread = 0;
-	}
-	memcpy(buf, rbuf->data+rbuf->pread, todo);
-
-	rbuf->pread = (rbuf->pread + todo) % rbuf->size;
-}
-
-
-ssize_t dvb_ringbuffer_write(struct dvb_ringbuffer *rbuf, const u8 *buf, size_t len)
-{
-	size_t todo = len;
-	size_t split;
-
-	split = (rbuf->pwrite + len > rbuf->size) ? rbuf->size - rbuf->pwrite : 0;
-
-	if (split > 0) {
-		memcpy(rbuf->data+rbuf->pwrite, buf, split);
-		buf += split;
-		todo -= split;
-		rbuf->pwrite = 0;
-	}
-	memcpy(rbuf->data+rbuf->pwrite, buf, todo);
-	rbuf->pwrite = (rbuf->pwrite + todo) % rbuf->size;
-
-	return len;
-}
-
-ssize_t dvb_ringbuffer_pkt_write(struct dvb_ringbuffer *rbuf, u8* buf, size_t len)
-{
-	int status;
-	ssize_t oldpwrite = rbuf->pwrite;
-
-	DVB_RINGBUFFER_WRITE_BYTE(rbuf, len >> 8);
-	DVB_RINGBUFFER_WRITE_BYTE(rbuf, len & 0xff);
-	DVB_RINGBUFFER_WRITE_BYTE(rbuf, PKT_READY);
-	status = dvb_ringbuffer_write(rbuf, buf, len);
-
-	if (status < 0) rbuf->pwrite = oldpwrite;
-	return status;
-}
-
-ssize_t dvb_ringbuffer_pkt_read_user(struct dvb_ringbuffer *rbuf, size_t idx,
-				int offset, u8 __user *buf, size_t len)
-{
-	size_t todo;
-	size_t split;
-	size_t pktlen;
-
-	pktlen = rbuf->data[idx] << 8;
-	pktlen |= rbuf->data[(idx + 1) % rbuf->size];
-	if (offset > pktlen) return -EINVAL;
-	if ((offset + len) > pktlen) len = pktlen - offset;
-
-	idx = (idx + DVB_RINGBUFFER_PKTHDRSIZE + offset) % rbuf->size;
-	todo = len;
-	split = ((idx + len) > rbuf->size) ? rbuf->size - idx : 0;
-	if (split > 0) {
-		if (copy_to_user(buf, rbuf->data+idx, split))
-			return -EFAULT;
-		buf += split;
-		todo -= split;
-		idx = 0;
-	}
-	if (copy_to_user(buf, rbuf->data+idx, todo))
-		return -EFAULT;
-
-	return len;
-}
-
-ssize_t dvb_ringbuffer_pkt_read(struct dvb_ringbuffer *rbuf, size_t idx,
-				int offset, u8* buf, size_t len)
-{
-	size_t todo;
-	size_t split;
-	size_t pktlen;
-
-	pktlen = rbuf->data[idx] << 8;
-	pktlen |= rbuf->data[(idx + 1) % rbuf->size];
-	if (offset > pktlen) return -EINVAL;
-	if ((offset + len) > pktlen) len = pktlen - offset;
-
-	idx = (idx + DVB_RINGBUFFER_PKTHDRSIZE + offset) % rbuf->size;
-	todo = len;
-	split = ((idx + len) > rbuf->size) ? rbuf->size - idx : 0;
-	if (split > 0) {
-		memcpy(buf, rbuf->data+idx, split);
-		buf += split;
-		todo -= split;
-		idx = 0;
-	}
-	memcpy(buf, rbuf->data+idx, todo);
-	return len;
-}
-
-void dvb_ringbuffer_pkt_dispose(struct dvb_ringbuffer *rbuf, size_t idx)
-{
-	size_t pktlen;
-
-	rbuf->data[(idx + 2) % rbuf->size] = PKT_DISPOSED;
-
-	// clean up disposed packets
-	while(dvb_ringbuffer_avail(rbuf) > DVB_RINGBUFFER_PKTHDRSIZE) {
-		if (DVB_RINGBUFFER_PEEK(rbuf, 2) == PKT_DISPOSED) {
-			pktlen = DVB_RINGBUFFER_PEEK(rbuf, 0) << 8;
-			pktlen |= DVB_RINGBUFFER_PEEK(rbuf, 1);
-			DVB_RINGBUFFER_SKIP(rbuf, pktlen + DVB_RINGBUFFER_PKTHDRSIZE);
-		} else {
-			// first packet is not disposed, so we stop cleaning now
-			break;
-		}
-	}
-}
-
-ssize_t dvb_ringbuffer_pkt_next(struct dvb_ringbuffer *rbuf, size_t idx, size_t* pktlen)
-{
-	int consumed;
-	int curpktlen;
-	int curpktstatus;
-
-	if (idx == -1) {
-	       idx = rbuf->pread;
-	} else {
-		curpktlen = rbuf->data[idx] << 8;
-		curpktlen |= rbuf->data[(idx + 1) % rbuf->size];
-		idx = (idx + curpktlen + DVB_RINGBUFFER_PKTHDRSIZE) % rbuf->size;
-	}
-
-	consumed = (idx - rbuf->pread) % rbuf->size;
-
-	while((dvb_ringbuffer_avail(rbuf) - consumed) > DVB_RINGBUFFER_PKTHDRSIZE) {
-
-		curpktlen = rbuf->data[idx] << 8;
-		curpktlen |= rbuf->data[(idx + 1) % rbuf->size];
-		curpktstatus = rbuf->data[(idx + 2) % rbuf->size];
-
-		if (curpktstatus == PKT_READY) {
-			*pktlen = curpktlen;
-			return idx;
-		}
-
-		consumed += curpktlen + DVB_RINGBUFFER_PKTHDRSIZE;
-		idx = (idx + curpktlen + DVB_RINGBUFFER_PKTHDRSIZE) % rbuf->size;
-	}
-
-	// no packets available
-	return -1;
-}
-
-
-
-EXPORT_SYMBOL(dvb_ringbuffer_init);
-EXPORT_SYMBOL(dvb_ringbuffer_empty);
-EXPORT_SYMBOL(dvb_ringbuffer_free);
-EXPORT_SYMBOL(dvb_ringbuffer_avail);
-EXPORT_SYMBOL(dvb_ringbuffer_flush_spinlock_wakeup);
-EXPORT_SYMBOL(dvb_ringbuffer_read_user);
-EXPORT_SYMBOL(dvb_ringbuffer_read);
-EXPORT_SYMBOL(dvb_ringbuffer_write);
diff --git a/drivers/media/dvb/dvb-core/dvb_ringbuffer.h b/drivers/media/dvb/dvb-core/dvb_ringbuffer.h
deleted file mode 100644
index 41f04da..0000000
--- a/drivers/media/dvb/dvb-core/dvb_ringbuffer.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- *
- * dvb_ringbuffer.h: ring buffer implementation for the dvb driver
- *
- * Copyright (C) 2003 Oliver Endriss
- * Copyright (C) 2004 Andrew de Quincey
- *
- * based on code originally found in av7110.c & dvb_ci.c:
- * Copyright (C) 1999-2003 Ralph Metzler & Marcus Metzler
- *                         for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef _DVB_RINGBUFFER_H_
-#define _DVB_RINGBUFFER_H_
-
-#include <linux/spinlock.h>
-#include <linux/wait.h>
-
-struct dvb_ringbuffer {
-	u8               *data;
-	ssize_t           size;
-	ssize_t           pread;
-	ssize_t           pwrite;
-	int               error;
-
-	wait_queue_head_t queue;
-	spinlock_t        lock;
-};
-
-#define DVB_RINGBUFFER_PKTHDRSIZE 3
-
-
-/*
-** Notes:
-** ------
-** (1) For performance reasons read and write routines don't check buffer sizes
-**     and/or number of bytes free/available. This has to be done before these
-**     routines are called. For example:
-**
-**     *** write <buflen> bytes ***
-**     free = dvb_ringbuffer_free(rbuf);
-**     if (free >= buflen)
-**         count = dvb_ringbuffer_write(rbuf, buffer, buflen);
-**     else
-**         ...
-**
-**     *** read min. 1000, max. <bufsize> bytes ***
-**     avail = dvb_ringbuffer_avail(rbuf);
-**     if (avail >= 1000)
-**         count = dvb_ringbuffer_read(rbuf, buffer, min(avail, bufsize));
-**     else
-**         ...
-**
-** (2) If there is exactly one reader and one writer, there is no need
-**     to lock read or write operations.
-**     Two or more readers must be locked against each other.
-**     Flushing the buffer counts as a read operation.
-**     Resetting the buffer counts as a read and write operation.
-**     Two or more writers must be locked against each other.
-*/
-
-/* initialize ring buffer, lock and queue */
-extern void dvb_ringbuffer_init(struct dvb_ringbuffer *rbuf, void *data, size_t len);
-
-/* test whether buffer is empty */
-extern int dvb_ringbuffer_empty(struct dvb_ringbuffer *rbuf);
-
-/* return the number of free bytes in the buffer */
-extern ssize_t dvb_ringbuffer_free(struct dvb_ringbuffer *rbuf);
-
-/* return the number of bytes waiting in the buffer */
-extern ssize_t dvb_ringbuffer_avail(struct dvb_ringbuffer *rbuf);
-
-
-/*
-** Reset the read and write pointers to zero and flush the buffer
-** This counts as a read and write operation
-*/
-extern void dvb_ringbuffer_reset(struct dvb_ringbuffer *rbuf);
-
-
-/* read routines & macros */
-/* ---------------------- */
-/* flush buffer */
-extern void dvb_ringbuffer_flush(struct dvb_ringbuffer *rbuf);
-
-/* flush buffer protected by spinlock and wake-up waiting task(s) */
-extern void dvb_ringbuffer_flush_spinlock_wakeup(struct dvb_ringbuffer *rbuf);
-
-/* peek at byte <offs> in the buffer */
-#define DVB_RINGBUFFER_PEEK(rbuf,offs)	\
-			(rbuf)->data[((rbuf)->pread+(offs))%(rbuf)->size]
-
-/* advance read ptr by <num> bytes */
-#define DVB_RINGBUFFER_SKIP(rbuf,num)	\
-			(rbuf)->pread=((rbuf)->pread+(num))%(rbuf)->size
-
-/*
-** read <len> bytes from ring buffer into <buf>
-** <usermem> specifies whether <buf> resides in user space
-** returns number of bytes transferred or -EFAULT
-*/
-extern ssize_t dvb_ringbuffer_read_user(struct dvb_ringbuffer *rbuf,
-				   u8 __user *buf, size_t len);
-extern void dvb_ringbuffer_read(struct dvb_ringbuffer *rbuf,
-				   u8 *buf, size_t len);
-
-
-/* write routines & macros */
-/* ----------------------- */
-/* write single byte to ring buffer */
-#define DVB_RINGBUFFER_WRITE_BYTE(rbuf,byte)	\
-			{ (rbuf)->data[(rbuf)->pwrite]=(byte); \
-			(rbuf)->pwrite=((rbuf)->pwrite+1)%(rbuf)->size; }
-/*
-** write <len> bytes to ring buffer
-** <usermem> specifies whether <buf> resides in user space
-** returns number of bytes transferred or -EFAULT
-*/
-extern ssize_t dvb_ringbuffer_write(struct dvb_ringbuffer *rbuf, const u8 *buf,
-				    size_t len);
-
-
-/**
- * Write a packet into the ringbuffer.
- *
- * <rbuf> Ringbuffer to write to.
- * <buf> Buffer to write.
- * <len> Length of buffer (currently limited to 65535 bytes max).
- * returns Number of bytes written, or -EFAULT, -ENOMEM, -EVINAL.
- */
-extern ssize_t dvb_ringbuffer_pkt_write(struct dvb_ringbuffer *rbuf, u8* buf,
-					size_t len);
-
-/**
- * Read from a packet in the ringbuffer. Note: unlike dvb_ringbuffer_read(), this
- * does NOT update the read pointer in the ringbuffer. You must use
- * dvb_ringbuffer_pkt_dispose() to mark a packet as no longer required.
- *
- * <rbuf> Ringbuffer concerned.
- * <idx> Packet index as returned by dvb_ringbuffer_pkt_next().
- * <offset> Offset into packet to read from.
- * <buf> Destination buffer for data.
- * <len> Size of destination buffer.
- * <usermem> Set to 1 if <buf> is in userspace.
- * returns Number of bytes read, or -EFAULT.
- */
-extern ssize_t dvb_ringbuffer_pkt_read_user(struct dvb_ringbuffer *rbuf, size_t idx,
-				       int offset, u8 __user *buf, size_t len);
-extern ssize_t dvb_ringbuffer_pkt_read(struct dvb_ringbuffer *rbuf, size_t idx,
-				       int offset, u8 *buf, size_t len);
-
-/**
- * Dispose of a packet in the ring buffer.
- *
- * <rbuf> Ring buffer concerned.
- * <idx> Packet index as returned by dvb_ringbuffer_pkt_next().
- */
-extern void dvb_ringbuffer_pkt_dispose(struct dvb_ringbuffer *rbuf, size_t idx);
-
-/**
- * Get the index of the next packet in a ringbuffer.
- *
- * <rbuf> Ringbuffer concerned.
- * <idx> Previous packet index, or -1 to return the first packet index.
- * <pktlen> On success, will be updated to contain the length of the packet in bytes.
- * returns Packet index (if >=0), or -1 if no packets available.
- */
-extern ssize_t dvb_ringbuffer_pkt_next(struct dvb_ringbuffer *rbuf, size_t idx, size_t* pktlen);
-
-
-#endif /* _DVB_RINGBUFFER_H_ */
diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c
deleted file mode 100644
index 39eab73..0000000
--- a/drivers/media/dvb/dvb-core/dvbdev.c
+++ /dev/null
@@ -1,507 +0,0 @@
-/*
- * dvbdev.c
- *
- * Copyright (C) 2000 Ralph  Metzler <ralph@convergence.de>
- *                  & Marcus Metzler <marcus@convergence.de>
- *                    for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/cdev.h>
-#include <linux/mutex.h>
-#include "dvbdev.h"
-
-static DEFINE_MUTEX(dvbdev_mutex);
-static int dvbdev_debug;
-
-module_param(dvbdev_debug, int, 0644);
-MODULE_PARM_DESC(dvbdev_debug, "Turn on/off device debugging (default:off).");
-
-#define dprintk if (dvbdev_debug) printk
-
-static LIST_HEAD(dvb_adapter_list);
-static DEFINE_MUTEX(dvbdev_register_lock);
-
-static const char * const dnames[] = {
-	"video", "audio", "sec", "frontend", "demux", "dvr", "ca",
-	"net", "osd"
-};
-
-#ifdef CONFIG_DVB_DYNAMIC_MINORS
-#define MAX_DVB_MINORS		256
-#define DVB_MAX_IDS		MAX_DVB_MINORS
-#else
-#define DVB_MAX_IDS		4
-#define nums2minor(num,type,id)	((num << 6) | (id << 4) | type)
-#define MAX_DVB_MINORS		(DVB_MAX_ADAPTERS*64)
-#endif
-
-static struct class *dvb_class;
-
-static struct dvb_device *dvb_minors[MAX_DVB_MINORS];
-static DECLARE_RWSEM(minor_rwsem);
-
-static int dvb_device_open(struct inode *inode, struct file *file)
-{
-	struct dvb_device *dvbdev;
-
-	mutex_lock(&dvbdev_mutex);
-	down_read(&minor_rwsem);
-	dvbdev = dvb_minors[iminor(inode)];
-
-	if (dvbdev && dvbdev->fops) {
-		int err = 0;
-		const struct file_operations *old_fops;
-
-		file->private_data = dvbdev;
-		old_fops = file->f_op;
-		file->f_op = fops_get(dvbdev->fops);
-		if (file->f_op == NULL) {
-			file->f_op = old_fops;
-			goto fail;
-		}
-		if(file->f_op->open)
-			err = file->f_op->open(inode,file);
-		if (err) {
-			fops_put(file->f_op);
-			file->f_op = fops_get(old_fops);
-		}
-		fops_put(old_fops);
-		up_read(&minor_rwsem);
-		mutex_unlock(&dvbdev_mutex);
-		return err;
-	}
-fail:
-	up_read(&minor_rwsem);
-	mutex_unlock(&dvbdev_mutex);
-	return -ENODEV;
-}
-
-
-static const struct file_operations dvb_device_fops =
-{
-	.owner =	THIS_MODULE,
-	.open =		dvb_device_open,
-	.llseek =	noop_llseek,
-};
-
-static struct cdev dvb_device_cdev;
-
-int dvb_generic_open(struct inode *inode, struct file *file)
-{
-	struct dvb_device *dvbdev = file->private_data;
-
-	if (!dvbdev)
-		return -ENODEV;
-
-	if (!dvbdev->users)
-		return -EBUSY;
-
-	if ((file->f_flags & O_ACCMODE) == O_RDONLY) {
-		if (!dvbdev->readers)
-			return -EBUSY;
-		dvbdev->readers--;
-	} else {
-		if (!dvbdev->writers)
-			return -EBUSY;
-		dvbdev->writers--;
-	}
-
-	dvbdev->users--;
-	return 0;
-}
-EXPORT_SYMBOL(dvb_generic_open);
-
-
-int dvb_generic_release(struct inode *inode, struct file *file)
-{
-	struct dvb_device *dvbdev = file->private_data;
-
-	if (!dvbdev)
-		return -ENODEV;
-
-	if ((file->f_flags & O_ACCMODE) == O_RDONLY) {
-		dvbdev->readers++;
-	} else {
-		dvbdev->writers++;
-	}
-
-	dvbdev->users++;
-	return 0;
-}
-EXPORT_SYMBOL(dvb_generic_release);
-
-
-long dvb_generic_ioctl(struct file *file,
-		       unsigned int cmd, unsigned long arg)
-{
-	struct dvb_device *dvbdev = file->private_data;
-
-	if (!dvbdev)
-		return -ENODEV;
-
-	if (!dvbdev->kernel_ioctl)
-		return -EINVAL;
-
-	return dvb_usercopy(file, cmd, arg, dvbdev->kernel_ioctl);
-}
-EXPORT_SYMBOL(dvb_generic_ioctl);
-
-
-static int dvbdev_get_free_id (struct dvb_adapter *adap, int type)
-{
-	u32 id = 0;
-
-	while (id < DVB_MAX_IDS) {
-		struct dvb_device *dev;
-		list_for_each_entry(dev, &adap->device_list, list_head)
-			if (dev->type == type && dev->id == id)
-				goto skip;
-		return id;
-skip:
-		id++;
-	}
-	return -ENFILE;
-}
-
-
-int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
-			const struct dvb_device *template, void *priv, int type)
-{
-	struct dvb_device *dvbdev;
-	struct file_operations *dvbdevfops;
-	struct device *clsdev;
-	int minor;
-	int id;
-
-	mutex_lock(&dvbdev_register_lock);
-
-	if ((id = dvbdev_get_free_id (adap, type)) < 0){
-		mutex_unlock(&dvbdev_register_lock);
-		*pdvbdev = NULL;
-		printk(KERN_ERR "%s: couldn't find free device id\n", __func__);
-		return -ENFILE;
-	}
-
-	*pdvbdev = dvbdev = kmalloc(sizeof(struct dvb_device), GFP_KERNEL);
-
-	if (!dvbdev){
-		mutex_unlock(&dvbdev_register_lock);
-		return -ENOMEM;
-	}
-
-	dvbdevfops = kzalloc(sizeof(struct file_operations), GFP_KERNEL);
-
-	if (!dvbdevfops){
-		kfree (dvbdev);
-		mutex_unlock(&dvbdev_register_lock);
-		return -ENOMEM;
-	}
-
-	memcpy(dvbdev, template, sizeof(struct dvb_device));
-	dvbdev->type = type;
-	dvbdev->id = id;
-	dvbdev->adapter = adap;
-	dvbdev->priv = priv;
-	dvbdev->fops = dvbdevfops;
-	init_waitqueue_head (&dvbdev->wait_queue);
-
-	memcpy(dvbdevfops, template->fops, sizeof(struct file_operations));
-	dvbdevfops->owner = adap->module;
-
-	list_add_tail (&dvbdev->list_head, &adap->device_list);
-
-	down_write(&minor_rwsem);
-#ifdef CONFIG_DVB_DYNAMIC_MINORS
-	for (minor = 0; minor < MAX_DVB_MINORS; minor++)
-		if (dvb_minors[minor] == NULL)
-			break;
-
-	if (minor == MAX_DVB_MINORS) {
-		kfree(dvbdevfops);
-		kfree(dvbdev);
-		up_write(&minor_rwsem);
-		mutex_unlock(&dvbdev_register_lock);
-		return -EINVAL;
-	}
-#else
-	minor = nums2minor(adap->num, type, id);
-#endif
-
-	dvbdev->minor = minor;
-	dvb_minors[minor] = dvbdev;
-	up_write(&minor_rwsem);
-
-	mutex_unlock(&dvbdev_register_lock);
-
-	clsdev = device_create(dvb_class, adap->device,
-			       MKDEV(DVB_MAJOR, minor),
-			       dvbdev, "dvb%d.%s%d", adap->num, dnames[type], id);
-	if (IS_ERR(clsdev)) {
-		printk(KERN_ERR "%s: failed to create device dvb%d.%s%d (%ld)\n",
-		       __func__, adap->num, dnames[type], id, PTR_ERR(clsdev));
-		return PTR_ERR(clsdev);
-	}
-
-	dprintk(KERN_DEBUG "DVB: register adapter%d/%s%d @ minor: %i (0x%02x)\n",
-		adap->num, dnames[type], id, minor, minor);
-
-	return 0;
-}
-EXPORT_SYMBOL(dvb_register_device);
-
-
-void dvb_unregister_device(struct dvb_device *dvbdev)
-{
-	if (!dvbdev)
-		return;
-
-	down_write(&minor_rwsem);
-	dvb_minors[dvbdev->minor] = NULL;
-	up_write(&minor_rwsem);
-
-	device_destroy(dvb_class, MKDEV(DVB_MAJOR, dvbdev->minor));
-
-	list_del (&dvbdev->list_head);
-	kfree (dvbdev->fops);
-	kfree (dvbdev);
-}
-EXPORT_SYMBOL(dvb_unregister_device);
-
-static int dvbdev_check_free_adapter_num(int num)
-{
-	struct list_head *entry;
-	list_for_each(entry, &dvb_adapter_list) {
-		struct dvb_adapter *adap;
-		adap = list_entry(entry, struct dvb_adapter, list_head);
-		if (adap->num == num)
-			return 0;
-	}
-	return 1;
-}
-
-static int dvbdev_get_free_adapter_num (void)
-{
-	int num = 0;
-
-	while (num < DVB_MAX_ADAPTERS) {
-		if (dvbdev_check_free_adapter_num(num))
-			return num;
-		num++;
-	}
-
-	return -ENFILE;
-}
-
-
-int dvb_register_adapter(struct dvb_adapter *adap, const char *name,
-			 struct module *module, struct device *device,
-			 short *adapter_nums)
-{
-	int i, num;
-
-	mutex_lock(&dvbdev_register_lock);
-
-	for (i = 0; i < DVB_MAX_ADAPTERS; ++i) {
-		num = adapter_nums[i];
-		if (num >= 0  &&  num < DVB_MAX_ADAPTERS) {
-		/* use the one the driver asked for */
-			if (dvbdev_check_free_adapter_num(num))
-				break;
-		} else {
-			num = dvbdev_get_free_adapter_num();
-			break;
-		}
-		num = -1;
-	}
-
-	if (num < 0) {
-		mutex_unlock(&dvbdev_register_lock);
-		return -ENFILE;
-	}
-
-	memset (adap, 0, sizeof(struct dvb_adapter));
-	INIT_LIST_HEAD (&adap->device_list);
-
-	printk(KERN_INFO "DVB: registering new adapter (%s)\n", name);
-
-	adap->num = num;
-	adap->name = name;
-	adap->module = module;
-	adap->device = device;
-	adap->mfe_shared = 0;
-	adap->mfe_dvbdev = NULL;
-	mutex_init (&adap->mfe_lock);
-
-	list_add_tail (&adap->list_head, &dvb_adapter_list);
-
-	mutex_unlock(&dvbdev_register_lock);
-
-	return num;
-}
-EXPORT_SYMBOL(dvb_register_adapter);
-
-
-int dvb_unregister_adapter(struct dvb_adapter *adap)
-{
-	mutex_lock(&dvbdev_register_lock);
-	list_del (&adap->list_head);
-	mutex_unlock(&dvbdev_register_lock);
-	return 0;
-}
-EXPORT_SYMBOL(dvb_unregister_adapter);
-
-/* if the miracle happens and "generic_usercopy()" is included into
-   the kernel, then this can vanish. please don't make the mistake and
-   define this as video_usercopy(). this will introduce a dependecy
-   to the v4l "videodev.o" module, which is unnecessary for some
-   cards (ie. the budget dvb-cards don't need the v4l module...) */
-int dvb_usercopy(struct file *file,
-		     unsigned int cmd, unsigned long arg,
-		     int (*func)(struct file *file,
-		     unsigned int cmd, void *arg))
-{
-	char    sbuf[128];
-	void    *mbuf = NULL;
-	void    *parg = NULL;
-	int     err  = -EINVAL;
-
-	/*  Copy arguments into temp kernel buffer  */
-	switch (_IOC_DIR(cmd)) {
-	case _IOC_NONE:
-		/*
-		 * For this command, the pointer is actually an integer
-		 * argument.
-		 */
-		parg = (void *) arg;
-		break;
-	case _IOC_READ: /* some v4l ioctls are marked wrong ... */
-	case _IOC_WRITE:
-	case (_IOC_WRITE | _IOC_READ):
-		if (_IOC_SIZE(cmd) <= sizeof(sbuf)) {
-			parg = sbuf;
-		} else {
-			/* too big to allocate from stack */
-			mbuf = kmalloc(_IOC_SIZE(cmd),GFP_KERNEL);
-			if (NULL == mbuf)
-				return -ENOMEM;
-			parg = mbuf;
-		}
-
-		err = -EFAULT;
-		if (copy_from_user(parg, (void __user *)arg, _IOC_SIZE(cmd)))
-			goto out;
-		break;
-	}
-
-	/* call driver */
-	mutex_lock(&dvbdev_mutex);
-	if ((err = func(file, cmd, parg)) == -ENOIOCTLCMD)
-		err = -EINVAL;
-	mutex_unlock(&dvbdev_mutex);
-
-	if (err < 0)
-		goto out;
-
-	/*  Copy results into user buffer  */
-	switch (_IOC_DIR(cmd))
-	{
-	case _IOC_READ:
-	case (_IOC_WRITE | _IOC_READ):
-		if (copy_to_user((void __user *)arg, parg, _IOC_SIZE(cmd)))
-			err = -EFAULT;
-		break;
-	}
-
-out:
-	kfree(mbuf);
-	return err;
-}
-
-static int dvb_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
-	struct dvb_device *dvbdev = dev_get_drvdata(dev);
-
-	add_uevent_var(env, "DVB_ADAPTER_NUM=%d", dvbdev->adapter->num);
-	add_uevent_var(env, "DVB_DEVICE_TYPE=%s", dnames[dvbdev->type]);
-	add_uevent_var(env, "DVB_DEVICE_NUM=%d", dvbdev->id);
-	return 0;
-}
-
-static char *dvb_devnode(struct device *dev, umode_t *mode)
-{
-	struct dvb_device *dvbdev = dev_get_drvdata(dev);
-
-	return kasprintf(GFP_KERNEL, "dvb/adapter%d/%s%d",
-		dvbdev->adapter->num, dnames[dvbdev->type], dvbdev->id);
-}
-
-
-static int __init init_dvbdev(void)
-{
-	int retval;
-	dev_t dev = MKDEV(DVB_MAJOR, 0);
-
-	if ((retval = register_chrdev_region(dev, MAX_DVB_MINORS, "DVB")) != 0) {
-		printk(KERN_ERR "dvb-core: unable to get major %d\n", DVB_MAJOR);
-		return retval;
-	}
-
-	cdev_init(&dvb_device_cdev, &dvb_device_fops);
-	if ((retval = cdev_add(&dvb_device_cdev, dev, MAX_DVB_MINORS)) != 0) {
-		printk(KERN_ERR "dvb-core: unable register character device\n");
-		goto error;
-	}
-
-	dvb_class = class_create(THIS_MODULE, "dvb");
-	if (IS_ERR(dvb_class)) {
-		retval = PTR_ERR(dvb_class);
-		goto error;
-	}
-	dvb_class->dev_uevent = dvb_uevent;
-	dvb_class->devnode = dvb_devnode;
-	return 0;
-
-error:
-	cdev_del(&dvb_device_cdev);
-	unregister_chrdev_region(dev, MAX_DVB_MINORS);
-	return retval;
-}
-
-
-static void __exit exit_dvbdev(void)
-{
-	class_destroy(dvb_class);
-	cdev_del(&dvb_device_cdev);
-	unregister_chrdev_region(MKDEV(DVB_MAJOR, 0), MAX_DVB_MINORS);
-}
-
-subsys_initcall(init_dvbdev);
-module_exit(exit_dvbdev);
-
-MODULE_DESCRIPTION("DVB Core Driver");
-MODULE_AUTHOR("Marcus Metzler, Ralph Metzler, Holger Waechtler");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-core/dvbdev.h b/drivers/media/dvb/dvb-core/dvbdev.h
deleted file mode 100644
index fcc6ae9..0000000
--- a/drivers/media/dvb/dvb-core/dvbdev.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * dvbdev.h
- *
- * Copyright (C) 2000 Ralph Metzler & Marcus Metzler
- *                    for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Lesser Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#ifndef _DVBDEV_H_
-#define _DVBDEV_H_
-
-#include <linux/types.h>
-#include <linux/poll.h>
-#include <linux/fs.h>
-#include <linux/list.h>
-
-#define DVB_MAJOR 212
-
-#if defined(CONFIG_DVB_MAX_ADAPTERS) && CONFIG_DVB_MAX_ADAPTERS > 0
-  #define DVB_MAX_ADAPTERS CONFIG_DVB_MAX_ADAPTERS
-#else
-  #define DVB_MAX_ADAPTERS 8
-#endif
-
-#define DVB_UNSET (-1)
-
-#define DVB_DEVICE_VIDEO      0
-#define DVB_DEVICE_AUDIO      1
-#define DVB_DEVICE_SEC        2
-#define DVB_DEVICE_FRONTEND   3
-#define DVB_DEVICE_DEMUX      4
-#define DVB_DEVICE_DVR        5
-#define DVB_DEVICE_CA         6
-#define DVB_DEVICE_NET        7
-#define DVB_DEVICE_OSD        8
-
-#define DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr) \
-	static short adapter_nr[] = \
-		{[0 ... (DVB_MAX_ADAPTERS - 1)] = DVB_UNSET }; \
-	module_param_array(adapter_nr, short, NULL, 0444); \
-	MODULE_PARM_DESC(adapter_nr, "DVB adapter numbers")
-
-struct dvb_frontend;
-
-struct dvb_adapter {
-	int num;
-	struct list_head list_head;
-	struct list_head device_list;
-	const char *name;
-	u8 proposed_mac [6];
-	void* priv;
-
-	struct device *device;
-
-	struct module *module;
-
-	int mfe_shared;			/* indicates mutually exclusive frontends */
-	struct dvb_device *mfe_dvbdev;	/* frontend device in use */
-	struct mutex mfe_lock;		/* access lock for thread creation */
-
-	/* Allow the adapter/bridge driver to perform an action before and/or
-	 * after the core handles an ioctl:
-	 *
-	 * DVB_FE_IOCTL_PRE indicates that the ioctl has not yet been handled.
-	 * DVB_FE_IOCTL_POST indicates that the ioctl has been handled.
-	 *
-	 * When DVB_FE_IOCTL_PRE is passed to the callback as the stage arg:
-	 *
-	 * return 0 to allow dvb-core to handle the ioctl.
-	 * return a positive int to prevent dvb-core from handling the ioctl,
-	 * 	and exit without error.
-	 * return a negative int to prevent dvb-core from handling the ioctl,
-	 * 	and return that value as an error.
-	 *
-	 * When DVB_FE_IOCTL_POST is passed to the callback as the stage arg:
-	 *
-	 * return 0 to allow the dvb_frontend ioctl handler to exit normally.
-	 * return a negative int to cause the dvb_frontend ioctl handler to
-	 * 	return that value as an error.
-	 */
-#define DVB_FE_IOCTL_PRE 0
-#define DVB_FE_IOCTL_POST 1
-	int (*fe_ioctl_override)(struct dvb_frontend *fe,
-				 unsigned int cmd, void *parg,
-				 unsigned int stage);
-};
-
-
-struct dvb_device {
-	struct list_head list_head;
-	const struct file_operations *fops;
-	struct dvb_adapter *adapter;
-	int type;
-	int minor;
-	u32 id;
-
-	/* in theory, 'users' can vanish now,
-	   but I don't want to change too much now... */
-	int readers;
-	int writers;
-	int users;
-
-	wait_queue_head_t	  wait_queue;
-	/* don't really need those !? -- FIXME: use video_usercopy  */
-	int (*kernel_ioctl)(struct file *file, unsigned int cmd, void *arg);
-
-	void *priv;
-};
-
-
-extern int dvb_register_adapter(struct dvb_adapter *adap, const char *name,
-				struct module *module, struct device *device,
-				short *adapter_nums);
-extern int dvb_unregister_adapter (struct dvb_adapter *adap);
-
-extern int dvb_register_device (struct dvb_adapter *adap,
-				struct dvb_device **pdvbdev,
-				const struct dvb_device *template,
-				void *priv,
-				int type);
-
-extern void dvb_unregister_device (struct dvb_device *dvbdev);
-
-extern int dvb_generic_open (struct inode *inode, struct file *file);
-extern int dvb_generic_release (struct inode *inode, struct file *file);
-extern long dvb_generic_ioctl (struct file *file,
-			      unsigned int cmd, unsigned long arg);
-
-/* we don't mess with video_usercopy() any more,
-we simply define out own dvb_usercopy(), which will hopefully become
-generic_usercopy()  someday... */
-
-extern int dvb_usercopy(struct file *file, unsigned int cmd, unsigned long arg,
-			    int (*func)(struct file *file, unsigned int cmd, void *arg));
-
-/** generic DVB attach function. */
-#ifdef CONFIG_MEDIA_ATTACH
-#define dvb_attach(FUNCTION, ARGS...) ({ \
-	void *__r = NULL; \
-	typeof(&FUNCTION) __a = symbol_request(FUNCTION); \
-	if (__a) { \
-		__r = (void *) __a(ARGS); \
-		if (__r == NULL) \
-			symbol_put(FUNCTION); \
-	} else { \
-		printk(KERN_ERR "DVB: Unable to find symbol "#FUNCTION"()\n"); \
-	} \
-	__r; \
-})
-
-#else
-#define dvb_attach(FUNCTION, ARGS...) ({ \
-	FUNCTION(ARGS); \
-})
-
-#endif
-
-#endif /* #ifndef _DVBDEV_H_ */
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
deleted file mode 100644
index c216156..0000000
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ /dev/null
@@ -1,440 +0,0 @@
-config DVB_USB
-	tristate "Support for various USB DVB devices"
-	depends on DVB_CORE && USB && I2C && RC_CORE
-	help
-	  By enabling this you will be able to choose the various supported
-	  USB1.1 and USB2.0 DVB devices.
-
-	  Almost every USB device needs a firmware, please look into
-	  <file:Documentation/dvb/README.dvb-usb>.
-
-	  For a complete list of supported USB devices see the LinuxTV DVB Wiki:
-	  <http://www.linuxtv.org/wiki/index.php/DVB_USB>
-
-	  Say Y if you own a USB DVB device.
-
-config DVB_USB_DEBUG
-	bool "Enable extended debug support for all DVB-USB devices"
-	depends on DVB_USB
-	help
-	  Say Y if you want to enable debugging. See modinfo dvb-usb (and the
-	  appropriate drivers) for debug levels.
-
-config DVB_USB_A800
-	tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)"
-	depends on DVB_USB
-	select DVB_DIB3000MC
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
-	help
-	  Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver.
-
-config DVB_USB_DIBUSB_MB
-	tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)"
-	depends on DVB_USB
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_DIB3000MB
-	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
-	help
-	  Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by
-	  DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator.
-
-	  For an up-to-date list of devices supported by this driver, have a look
-	  on the Linux-DVB Wiki at www.linuxtv.org.
-
-	  Say Y if you own such a device and want to use it. You should build it as
-	  a module.
-
-config DVB_USB_DIBUSB_MB_FAULTY
-	bool "Support faulty USB IDs"
-	depends on DVB_USB_DIBUSB_MB
-	help
-	  Support for faulty USB IDs due to an invalid EEPROM on some Artec devices.
-
-config DVB_USB_DIBUSB_MC
-	tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)"
-	depends on DVB_USB
-	select DVB_DIB3000MC
-	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
-	help
-	  Support for USB2.0 DVB-T receivers based on reference designs made by
-	  DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator.
-
-	  For an up-to-date list of devices supported by this driver, have a look
-	  on the Linux-DVB Wiki at www.linuxtv.org.
-
-	  Say Y if you own such a device and want to use it. You should build it as
-	  a module.
-
-config DVB_USB_DIB0700
-	tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)"
-	depends on DVB_USB
-	select DVB_DIB7000P if !DVB_FE_CUSTOMISE
-	select DVB_DIB7000M if !DVB_FE_CUSTOMISE
-	select DVB_DIB8000 if !DVB_FE_CUSTOMISE
-	select DVB_DIB3000MC if !DVB_FE_CUSTOMISE
-	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
-	select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
-	select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
-	select DVB_TUNER_DIB0090 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_XC4000 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE
-	help
-	  Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
-	  USB bridge is also present in devices having the DiB7700 DVB-T-USB
-	  silicon. This chip can be found in devices offered by Hauppauge,
-	  Avermedia and other big and small companies.
-
-	  For an up-to-date list of devices supported by this driver, have a look
-	  on the LinuxTV Wiki at www.linuxtv.org.
-
-	  Say Y if you own such a device and want to use it. You should build it as
-	  a module.
-
-config DVB_USB_UMT_010
-	tristate "HanfTek UMT-010 DVB-T USB2.0 support"
-	depends on DVB_USB
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_DIB3000MC
-	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
-	select DVB_MT352 if !DVB_FE_CUSTOMISE
-	help
-	  Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
-
-config DVB_USB_CXUSB
-	tristate "Conexant USB2.0 hybrid reference design support"
-	depends on DVB_USB
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_CX22702 if !DVB_FE_CUSTOMISE
-	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
-	select DVB_MT352 if !DVB_FE_CUSTOMISE
-	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select DVB_DIB7000P if !DVB_FE_CUSTOMISE
-	select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
-	select DVB_ATBM8830 if !DVB_FE_CUSTOMISE
-	select DVB_LGS8GXX if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MAX2165 if !MEDIA_TUNER_CUSTOMISE
-	help
-	  Say Y here to support the Conexant USB2.0 hybrid reference design.
-	  Currently, only DVB and ATSC modes are supported, analog mode
-	  shall be added in the future. Devices that require this module:
-
-	  Medion MD95700 hybrid USB2.0 device.
-	  DViCO FusionHDTV (Bluebird) USB2.0 devices
-
-config DVB_USB_M920X
-	tristate "Uli m920x DVB-T USB2.0 support"
-	depends on DVB_USB
-	select DVB_MT352 if !DVB_FE_CUSTOMISE
-	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
-	help
-	  Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
-	  Currently, only devices with a product id of
-	  "DTV USB MINI" (in cold state) are supported.
-	  Firmware required.
-
-config DVB_USB_GL861
-	tristate "Genesys Logic GL861 USB2.0 support"
-	depends on DVB_USB
-	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
-	help
-	  Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0
-	  receiver with USB ID 0db0:5581.
-
-config DVB_USB_AU6610
-	tristate "Alcor Micro AU6610 USB2.0 support"
-	depends on DVB_USB
-	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
-	help
-	  Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver.
-
-config DVB_USB_DIGITV
-	tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support"
-	depends on DVB_USB
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_NXT6000 if !DVB_FE_CUSTOMISE
-	select DVB_MT352 if !DVB_FE_CUSTOMISE
-	help
-	  Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver.
-
-config DVB_USB_VP7045
-	tristate "TwinhanDTV Alpha/MagicBoxII, DNTV tinyUSB2, Beetle USB2.0 support"
-	depends on DVB_USB
-	help
-	  Say Y here to support the
-
-	    TwinhanDTV Alpha (stick) (VP-7045),
-		TwinhanDTV MagicBox II (VP-7046),
-		DigitalNow TinyUSB 2 DVB-t,
-		DigitalRise USB 2.0 Ter (Beetle) and
-		TYPHOON DVB-T USB DRIVE
-
-	  DVB-T USB2.0 receivers.
-
-config DVB_USB_VP702X
-	tristate "TwinhanDTV StarBox and clones DVB-S USB2.0 support"
-	depends on DVB_USB
-	help
-	  Say Y here to support the
-
-	    TwinhanDTV StarBox,
-		DigitalRise USB Starbox and
-		TYPHOON DVB-S USB 2.0 BOX
-
-	  DVB-S USB2.0 receivers.
-
-config DVB_USB_GP8PSK
-	tristate "GENPIX 8PSK->USB module support"
-	depends on DVB_USB
-	help
-	  Say Y here to support the
-	    GENPIX 8psk module
-
-	  DVB-S USB2.0 receivers.
-
-config DVB_USB_NOVA_T_USB2
-	tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support"
-	depends on DVB_USB
-	select DVB_DIB3000MC
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
-	help
-	  Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
-
-config DVB_USB_TTUSB2
-	tristate "Pinnacle 400e DVB-S USB2.0 support"
-	depends on DVB_USB
-	select DVB_TDA10086 if !DVB_FE_CUSTOMISE
-	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
-	select DVB_TDA826X if !DVB_FE_CUSTOMISE
-	help
-	  Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The
-	  firmware protocol used by this module is similar to the one used by the
-	  old ttusb-driver - that's why the module is called dvb-usb-ttusb2.
-
-config DVB_USB_DTT200U
-	tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)"
-	depends on DVB_USB
-	help
-	  Say Y here to support the WideView/Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 receiver.
-
-	  The receivers are also known as DTT200U (Yakumo) and UB300 (Yuan).
-
-	  The WT-220U and its clones are pen-sized.
-
-config DVB_USB_OPERA1
-	tristate "Opera1 DVB-S USB2.0 receiver"
-	depends on DVB_USB
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	help
-	  Say Y here to support the Opera DVB-S USB2.0 receiver.
-
-config DVB_USB_AF9005
-	tristate "Afatech AF9005 DVB-T USB1.1 support"
-	depends on DVB_USB && EXPERIMENTAL
-	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
-	help
-	  Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver
-	  and the TerraTec Cinergy T USB XE (Rev.1)
-
-config DVB_USB_AF9005_REMOTE
-	tristate "Afatech AF9005 default remote control support"
-	depends on DVB_USB_AF9005
-	help
-	  Say Y here to support the default remote control decoding for the
-	  Afatech AF9005 based receiver.
-
-config DVB_USB_PCTV452E
-	tristate "Pinnacle PCTV HDTV Pro USB device/TT Connect S2-3600"
-	depends on DVB_USB
-	select TTPCI_EEPROM
-	select DVB_LNBP22 if !DVB_FE_CUSTOMISE
-	select DVB_STB0899 if !DVB_FE_CUSTOMISE
-	select DVB_STB6100 if !DVB_FE_CUSTOMISE
-	help
-	  Support for external USB adapter designed by Pinnacle,
-	  shipped under the brand name 'PCTV HDTV Pro USB'.
-	  Also supports TT Connect S2-3600/3650 cards.
-	  Say Y if you own such a device and want to use it.
-
-config DVB_USB_DW2102
-	tristate "DvbWorld & TeVii DVB-S/S2 USB2.0 support"
-	depends on DVB_USB
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_STV0288 if !DVB_FE_CUSTOMISE
-	select DVB_STB6000 if !DVB_FE_CUSTOMISE
-	select DVB_CX24116 if !DVB_FE_CUSTOMISE
-	select DVB_SI21XX if !DVB_FE_CUSTOMISE
-	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
-	select DVB_MT312 if !DVB_FE_CUSTOMISE
-	select DVB_ZL10039 if !DVB_FE_CUSTOMISE
-	select DVB_DS3000 if !DVB_FE_CUSTOMISE
-	select DVB_STB6100 if !DVB_FE_CUSTOMISE
-	select DVB_STV6110 if !DVB_FE_CUSTOMISE
-	select DVB_STV0900 if !DVB_FE_CUSTOMISE
-	help
-	  Say Y here to support the DvbWorld, TeVii, Prof DVB-S/S2 USB2.0
-	  receivers.
-
-config DVB_USB_CINERGY_T2
-	tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver"
-	depends on DVB_USB
-	help
-	  Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers
-
-	  Say Y if you own such a device and want to use it.
-
-config DVB_USB_ANYSEE
-	tristate "Anysee DVB-T/C USB2.0 support"
-	depends on DVB_USB
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_MT352 if !DVB_FE_CUSTOMISE
-	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_TDA18212 if !MEDIA_TUNER_CUSTOMISE
-	select DVB_CX24116 if !DVB_FE_CUSTOMISE
-	select DVB_STV0900 if !DVB_FE_CUSTOMISE
-	select DVB_STV6110 if !DVB_FE_CUSTOMISE
-	select DVB_ISL6423 if !DVB_FE_CUSTOMISE
-	select DVB_CXD2820R if !DVB_FE_CUSTOMISE
-	help
-	  Say Y here to support the Anysee E30, Anysee E30 Plus or
-	  Anysee E30 C Plus DVB USB2.0 receiver.
-
-config DVB_USB_DTV5100
-	tristate "AME DTV-5100 USB2.0 DVB-T support"
-	depends on DVB_USB
-	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
-	help
-	  Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver.
-
-config DVB_USB_AF9015
-	tristate "Afatech AF9015 DVB-T USB2.0 support"
-	depends on DVB_USB
-	select DVB_AF9013
-	select DVB_PLL              if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2060   if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_QT1010   if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MC44S803 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_TDA18218 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE
-	help
-	  Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver
-
-config DVB_USB_CE6230
-	tristate "Intel CE6230 DVB-T USB2.0 support"
-	depends on DVB_USB
-	select DVB_ZL10353
-	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
-	help
-	  Say Y here to support the Intel CE6230 DVB-T USB2.0 receiver
-
-config DVB_USB_FRIIO
-	tristate "Friio ISDB-T USB2.0 Receiver support"
-	depends on DVB_USB
-	help
-	  Say Y here to support the Japanese DTV receiver Friio.
-
-config DVB_USB_EC168
-	tristate "E3C EC168 DVB-T USB2.0 support"
-	depends on DVB_USB
-	select DVB_EC100
-	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
-	help
-	  Say Y here to support the E3C EC168 DVB-T USB2.0 receiver.
-
-config DVB_USB_AZ6007
-	tristate "AzureWave 6007 and clones DVB-T/C USB2.0 support"
-	depends on DVB_USB
-	select DVB_DRXK if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2063 if !DVB_FE_CUSTOMISE
-	help
-	  Say Y here to support theAfatech AF9005 based DVB-T/DVB-C receivers.
-
-config DVB_USB_AZ6027
-	tristate "Azurewave DVB-S/S2 USB2.0 AZ6027 support"
-	depends on DVB_USB
-	select DVB_STB0899 if !DVB_FE_CUSTOMISE
-	select DVB_STB6100 if !DVB_FE_CUSTOMISE
-	help
-	  Say Y here to support the AZ6027 device
-
-config DVB_USB_LME2510
-	tristate "LME DM04/QQBOX DVB-S USB2.0 support"
-	depends on DVB_USB
-	select DVB_TDA10086 if !DVB_FE_CUSTOMISE
-	select DVB_TDA826X if !DVB_FE_CUSTOMISE
-	select DVB_STV0288 if !DVB_FE_CUSTOMISE
-	select DVB_IX2505V if !DVB_FE_CUSTOMISE
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_M88RS2000 if !DVB_FE_CUSTOMISE
-	help
-	  Say Y here to support the LME DM04/QQBOX DVB-S USB2.0 .
-
-config DVB_USB_TECHNISAT_USB2
-	tristate "Technisat DVB-S/S2 USB2.0 support"
-	depends on DVB_USB
-	select DVB_STV090x if !DVB_FE_CUSTOMISE
-	select DVB_STV6110x if !DVB_FE_CUSTOMISE
-	help
-	  Say Y here to support the Technisat USB2 DVB-S/S2 device
-
-config DVB_USB_IT913X
-	tristate "it913x driver"
-	depends on DVB_USB
-	select DVB_IT913X_FE
-	help
-	  Say Y here to support the it913x device
-
-config DVB_USB_MXL111SF
-	tristate "MxL111SF DTV USB2.0 support"
-	depends on DVB_USB
-	select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
-	select DVB_LG2160 if !DVB_FE_CUSTOMISE
-	select VIDEO_TVEEPROM
-	help
-	  Say Y here to support the MxL111SF USB2.0 DTV receiver.
-
-config DVB_USB_RTL28XXU
-	tristate "Realtek RTL28xxU DVB USB support"
-	depends on DVB_USB && EXPERIMENTAL
-	select DVB_RTL2830
-	select DVB_RTL2832
-	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_FC0012 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_FC0013 if !MEDIA_TUNER_CUSTOMISE
-	help
-	  Say Y here to support the Realtek RTL28xxU DVB USB receiver.
-
-config DVB_USB_AF9035
-	tristate "Afatech AF9035 DVB-T USB2.0 support"
-	depends on DVB_USB
-	select DVB_AF9033
-	select MEDIA_TUNER_TUA9001 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_FC0011 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_TDA18218 if !MEDIA_TUNER_CUSTOMISE
-	help
-	  Say Y here to support the Afatech AF9035 based DVB USB receiver.
-
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
deleted file mode 100644
index b667ac3..0000000
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ /dev/null
@@ -1,121 +0,0 @@
-dvb-usb-objs = dvb-usb-firmware.o dvb-usb-init.o dvb-usb-urb.o dvb-usb-i2c.o dvb-usb-dvb.o dvb-usb-remote.o usb-urb.o
-obj-$(CONFIG_DVB_USB) += dvb-usb.o
-
-dvb-usb-vp7045-objs = vp7045.o vp7045-fe.o
-obj-$(CONFIG_DVB_USB_VP7045) += dvb-usb-vp7045.o
-
-dvb-usb-vp702x-objs = vp702x.o vp702x-fe.o
-obj-$(CONFIG_DVB_USB_VP702X) += dvb-usb-vp702x.o
-
-dvb-usb-gp8psk-objs = gp8psk.o gp8psk-fe.o
-obj-$(CONFIG_DVB_USB_GP8PSK) += dvb-usb-gp8psk.o
-
-dvb-usb-dtt200u-objs = dtt200u.o dtt200u-fe.o
-obj-$(CONFIG_DVB_USB_DTT200U) += dvb-usb-dtt200u.o
-
-dvb-usb-dibusb-common-objs = dibusb-common.o
-
-dvb-usb-a800-objs = a800.o
-obj-$(CONFIG_DVB_USB_A800) += dvb-usb-dibusb-common.o dvb-usb-a800.o
-
-dvb-usb-dibusb-mb-objs = dibusb-mb.o
-obj-$(CONFIG_DVB_USB_DIBUSB_MB) += dvb-usb-dibusb-common.o dvb-usb-dibusb-mb.o
-
-dvb-usb-dibusb-mc-objs = dibusb-mc.o
-obj-$(CONFIG_DVB_USB_DIBUSB_MC) += dvb-usb-dibusb-common.o dvb-usb-dibusb-mc.o
-
-dvb-usb-nova-t-usb2-objs = nova-t-usb2.o
-obj-$(CONFIG_DVB_USB_NOVA_T_USB2) += dvb-usb-dibusb-common.o dvb-usb-nova-t-usb2.o
-
-dvb-usb-umt-010-objs = umt-010.o
-obj-$(CONFIG_DVB_USB_UMT_010) += dvb-usb-dibusb-common.o dvb-usb-umt-010.o
-
-dvb-usb-m920x-objs = m920x.o
-obj-$(CONFIG_DVB_USB_M920X) += dvb-usb-m920x.o
-
-dvb-usb-gl861-objs = gl861.o
-obj-$(CONFIG_DVB_USB_GL861) += dvb-usb-gl861.o
-
-dvb-usb-au6610-objs = au6610.o
-obj-$(CONFIG_DVB_USB_AU6610) += dvb-usb-au6610.o
-
-dvb-usb-digitv-objs = digitv.o
-obj-$(CONFIG_DVB_USB_DIGITV) += dvb-usb-digitv.o
-
-dvb-usb-cxusb-objs = cxusb.o
-obj-$(CONFIG_DVB_USB_CXUSB) += dvb-usb-cxusb.o
-
-dvb-usb-ttusb2-objs = ttusb2.o
-obj-$(CONFIG_DVB_USB_TTUSB2) += dvb-usb-ttusb2.o
-
-dvb-usb-dib0700-objs = dib0700_core.o dib0700_devices.o
-obj-$(CONFIG_DVB_USB_DIB0700) += dvb-usb-dib0700.o
-
-dvb-usb-opera-objs = opera1.o
-obj-$(CONFIG_DVB_USB_OPERA1) += dvb-usb-opera.o
-
-dvb-usb-af9005-objs = af9005.o af9005-fe.o
-obj-$(CONFIG_DVB_USB_AF9005) += dvb-usb-af9005.o
-
-dvb-usb-af9005-remote-objs = af9005-remote.o
-obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o
-
-dvb-usb-anysee-objs = anysee.o
-obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o
-
-dvb-usb-pctv452e-objs = pctv452e.o
-obj-$(CONFIG_DVB_USB_PCTV452E) += dvb-usb-pctv452e.o
-
-dvb-usb-dw2102-objs = dw2102.o
-obj-$(CONFIG_DVB_USB_DW2102) += dvb-usb-dw2102.o
-
-dvb-usb-dtv5100-objs = dtv5100.o
-obj-$(CONFIG_DVB_USB_DTV5100) += dvb-usb-dtv5100.o
-
-dvb-usb-af9015-objs = af9015.o
-obj-$(CONFIG_DVB_USB_AF9015) += dvb-usb-af9015.o
-
-dvb-usb-cinergyT2-objs = cinergyT2-core.o cinergyT2-fe.o
-obj-$(CONFIG_DVB_USB_CINERGY_T2) += dvb-usb-cinergyT2.o
-
-dvb-usb-ce6230-objs = ce6230.o
-obj-$(CONFIG_DVB_USB_CE6230) += dvb-usb-ce6230.o
-
-dvb-usb-friio-objs = friio.o friio-fe.o
-obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o
-
-dvb-usb-ec168-objs = ec168.o
-obj-$(CONFIG_DVB_USB_EC168) += dvb-usb-ec168.o
-
-dvb-usb-az6007-objs = az6007.o
-obj-$(CONFIG_DVB_USB_AZ6007) += dvb-usb-az6007.o
-
-dvb-usb-az6027-objs = az6027.o
-obj-$(CONFIG_DVB_USB_AZ6027) += dvb-usb-az6027.o
-
-dvb-usb-lmedm04-objs = lmedm04.o
-obj-$(CONFIG_DVB_USB_LME2510) += dvb-usb-lmedm04.o
-
-dvb-usb-technisat-usb2-objs = technisat-usb2.o
-obj-$(CONFIG_DVB_USB_TECHNISAT_USB2) += dvb-usb-technisat-usb2.o
-
-dvb-usb-it913x-objs := it913x.o
-obj-$(CONFIG_DVB_USB_IT913X) += dvb-usb-it913x.o
-
-dvb-usb-mxl111sf-objs = mxl111sf.o mxl111sf-phy.o mxl111sf-i2c.o mxl111sf-gpio.o
-obj-$(CONFIG_DVB_USB_MXL111SF) += dvb-usb-mxl111sf.o
-obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-demod.o
-obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o
-
-dvb-usb-rtl28xxu-objs = rtl28xxu.o
-obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o
-
-dvb-usb-af9035-objs = af9035.o
-obj-$(CONFIG_DVB_USB_AF9035) += dvb-usb-af9035.o
-
-ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core
-ccflags-y += -I$(srctree)/drivers/media/dvb/frontends/
-# due to tuner-xc3028
-ccflags-y += -I$(srctree)/drivers/media/common/tuners
-ccflags-y += -I$(srctree)/drivers/media/dvb/ttpci
-
diff --git a/drivers/media/dvb/dvb-usb/a800.c b/drivers/media/dvb/dvb-usb/a800.c
deleted file mode 100644
index 8d7fef8..0000000
--- a/drivers/media/dvb/dvb-usb/a800.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/* DVB USB framework compliant Linux driver for the AVerMedia AverTV DVB-T
- * USB2.0 (A800) DVB-T receiver.
- *
- * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de)
- *
- * Thanks to
- *   - AVerMedia who kindly provided information and
- *   - Glen Harris who suffered from my mistakes during development.
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "dibusb.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (rc=1 (or-able))." DVB_USB_DEBUG_STATUS);
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-#define deb_rc(args...)   dprintk(debug,0x01,args)
-
-static int a800_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	/* do nothing for the AVerMedia */
-	return 0;
-}
-
-/* assure to put cold to 0 for iManufacturer == 1 */
-static int a800_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
-	struct dvb_usb_device_description **desc, int *cold)
-{
-	*cold = udev->descriptor.iManufacturer != 1;
-	return 0;
-}
-
-static struct rc_map_table rc_map_a800_table[] = {
-	{ 0x0201, KEY_MODE },      /* SOURCE */
-	{ 0x0200, KEY_POWER2 },      /* POWER */
-	{ 0x0205, KEY_1 },           /* 1 */
-	{ 0x0206, KEY_2 },           /* 2 */
-	{ 0x0207, KEY_3 },           /* 3 */
-	{ 0x0209, KEY_4 },           /* 4 */
-	{ 0x020a, KEY_5 },           /* 5 */
-	{ 0x020b, KEY_6 },           /* 6 */
-	{ 0x020d, KEY_7 },           /* 7 */
-	{ 0x020e, KEY_8 },           /* 8 */
-	{ 0x020f, KEY_9 },           /* 9 */
-	{ 0x0212, KEY_LEFT },        /* L / DISPLAY */
-	{ 0x0211, KEY_0 },           /* 0 */
-	{ 0x0213, KEY_RIGHT },       /* R / CH RTN */
-	{ 0x0217, KEY_CAMERA },      /* SNAP SHOT */
-	{ 0x0210, KEY_LAST },        /* 16-CH PREV */
-	{ 0x021e, KEY_VOLUMEDOWN },  /* VOL DOWN */
-	{ 0x020c, KEY_ZOOM },        /* FULL SCREEN */
-	{ 0x021f, KEY_VOLUMEUP },    /* VOL UP */
-	{ 0x0214, KEY_MUTE },        /* MUTE */
-	{ 0x0208, KEY_AUDIO },       /* AUDIO */
-	{ 0x0219, KEY_RECORD },      /* RECORD */
-	{ 0x0218, KEY_PLAY },        /* PLAY */
-	{ 0x021b, KEY_STOP },        /* STOP */
-	{ 0x021a, KEY_PLAYPAUSE },   /* TIMESHIFT / PAUSE */
-	{ 0x021d, KEY_BACK },        /* << / RED */
-	{ 0x021c, KEY_FORWARD },     /* >> / YELLOW */
-	{ 0x0203, KEY_TEXT },        /* TELETEXT */
-	{ 0x0204, KEY_EPG },         /* EPG */
-	{ 0x0215, KEY_MENU },        /* MENU */
-
-	{ 0x0303, KEY_CHANNELUP },   /* CH UP */
-	{ 0x0302, KEY_CHANNELDOWN }, /* CH DOWN */
-	{ 0x0301, KEY_FIRST },       /* |<< / GREEN */
-	{ 0x0300, KEY_LAST },        /* >>| / BLUE */
-
-};
-
-static int a800_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
-{
-	int ret;
-	u8 *key = kmalloc(5, GFP_KERNEL);
-	if (!key)
-		return -ENOMEM;
-
-	if (usb_control_msg(d->udev,usb_rcvctrlpipe(d->udev,0),
-				0x04, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, key, 5,
-				2000) != 5) {
-		ret = -ENODEV;
-		goto out;
-	}
-
-	/* call the universal NEC remote processor, to find out the key's state and event */
-	dvb_usb_nec_rc_key_to_event(d,key,event,state);
-	if (key[0] != 0)
-		deb_rc("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]);
-	ret = 0;
-out:
-	kfree(key);
-	return ret;
-}
-
-/* USB Driver stuff */
-static struct dvb_usb_device_properties a800_properties;
-
-static int a800_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	return dvb_usb_device_init(intf, &a800_properties,
-				   THIS_MODULE, NULL, adapter_nr);
-}
-
-/* do not change the order of the ID table */
-static struct usb_device_id a800_table [] = {
-/* 00 */	{ USB_DEVICE(USB_VID_AVERMEDIA,     USB_PID_AVERMEDIA_DVBT_USB2_COLD) },
-/* 01 */	{ USB_DEVICE(USB_VID_AVERMEDIA,     USB_PID_AVERMEDIA_DVBT_USB2_WARM) },
-			{ }		/* Terminating entry */
-};
-MODULE_DEVICE_TABLE (usb, a800_table);
-
-static struct dvb_usb_device_properties a800_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = CYPRESS_FX2,
-	.firmware = "dvb-usb-avertv-a800-02.fw",
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-			.pid_filter_count = 32,
-			.streaming_ctrl   = dibusb2_0_streaming_ctrl,
-			.pid_filter       = dibusb_pid_filter,
-			.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
-
-			.frontend_attach  = dibusb_dib3000mc_frontend_attach,
-			.tuner_attach     = dibusb_dib3000mc_tuner_attach,
-
-			/* parameter for the MPEG2-data transfer */
-					.stream = {
-						.type = USB_BULK,
-				.count = 7,
-				.endpoint = 0x06,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			},
-		}},
-			.size_of_priv     = sizeof(struct dibusb_state),
-		},
-	},
-
-	.power_ctrl       = a800_power_ctrl,
-	.identify_state   = a800_identify_state,
-
-	.rc.legacy = {
-		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_map_table     = rc_map_a800_table,
-		.rc_map_size      = ARRAY_SIZE(rc_map_a800_table),
-		.rc_query         = a800_rc_query,
-	},
-
-	.i2c_algo         = &dibusb_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-	.num_device_descs = 1,
-	.devices = {
-		{   "AVerMedia AverTV DVB-T USB 2.0 (A800)",
-			{ &a800_table[0], NULL },
-			{ &a800_table[1], NULL },
-		},
-	}
-};
-
-static struct usb_driver a800_driver = {
-	.name		= "dvb_usb_a800",
-	.probe		= a800_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table	= a800_table,
-};
-
-module_usb_driver(a800_driver);
-
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
-MODULE_DESCRIPTION("AVerMedia AverTV DVB-T USB 2.0 (A800)");
-MODULE_VERSION("1.0");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/af9005-fe.c b/drivers/media/dvb/dvb-usb/af9005-fe.c
deleted file mode 100644
index 740f3f4..0000000
--- a/drivers/media/dvb/dvb-usb/af9005-fe.c
+++ /dev/null
@@ -1,1487 +0,0 @@
-/* Frontend part of the Linux driver for the Afatech 9005
- * USB1.1 DVB-T receiver.
- *
- * Copyright (C) 2007 Luca Olivetti (luca@ventoso.org)
- *
- * Thanks to Afatech who kindly provided information.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "af9005.h"
-#include "af9005-script.h"
-#include "mt2060.h"
-#include "qt1010.h"
-#include <asm/div64.h>
-
-struct af9005_fe_state {
-	struct dvb_usb_device *d;
-	fe_status_t stat;
-
-	/* retraining parameters */
-	u32 original_fcw;
-	u16 original_rf_top;
-	u16 original_if_top;
-	u16 original_if_min;
-	u16 original_aci0_if_top;
-	u16 original_aci1_if_top;
-	u16 original_aci0_if_min;
-	u8 original_if_unplug_th;
-	u8 original_rf_unplug_th;
-	u8 original_dtop_if_unplug_th;
-	u8 original_dtop_rf_unplug_th;
-
-	/* statistics */
-	u32 pre_vit_error_count;
-	u32 pre_vit_bit_count;
-	u32 ber;
-	u32 post_vit_error_count;
-	u32 post_vit_bit_count;
-	u32 unc;
-	u16 abort_count;
-
-	int opened;
-	int strong;
-	unsigned long next_status_check;
-	struct dvb_frontend frontend;
-};
-
-static int af9005_write_word_agc(struct dvb_usb_device *d, u16 reghi,
-				 u16 reglo, u8 pos, u8 len, u16 value)
-{
-	int ret;
-
-	if ((ret = af9005_write_ofdm_register(d, reglo, (u8) (value & 0xff))))
-		return ret;
-	return af9005_write_register_bits(d, reghi, pos, len,
-					  (u8) ((value & 0x300) >> 8));
-}
-
-static int af9005_read_word_agc(struct dvb_usb_device *d, u16 reghi,
-				u16 reglo, u8 pos, u8 len, u16 * value)
-{
-	int ret;
-	u8 temp0, temp1;
-
-	if ((ret = af9005_read_ofdm_register(d, reglo, &temp0)))
-		return ret;
-	if ((ret = af9005_read_ofdm_register(d, reghi, &temp1)))
-		return ret;
-	switch (pos) {
-	case 0:
-		*value = ((u16) (temp1 & 0x03) << 8) + (u16) temp0;
-		break;
-	case 2:
-		*value = ((u16) (temp1 & 0x0C) << 6) + (u16) temp0;
-		break;
-	case 4:
-		*value = ((u16) (temp1 & 0x30) << 4) + (u16) temp0;
-		break;
-	case 6:
-		*value = ((u16) (temp1 & 0xC0) << 2) + (u16) temp0;
-		break;
-	default:
-		err("invalid pos in read word agc");
-		return -EINVAL;
-	}
-	return 0;
-
-}
-
-static int af9005_is_fecmon_available(struct dvb_frontend *fe, int *available)
-{
-	struct af9005_fe_state *state = fe->demodulator_priv;
-	int ret;
-	u8 temp;
-
-	*available = false;
-
-	ret = af9005_read_register_bits(state->d, xd_p_fec_vtb_rsd_mon_en,
-					fec_vtb_rsd_mon_en_pos,
-					fec_vtb_rsd_mon_en_len, &temp);
-	if (ret)
-		return ret;
-	if (temp & 1) {
-		ret =
-		    af9005_read_register_bits(state->d,
-					      xd_p_reg_ofsm_read_rbc_en,
-					      reg_ofsm_read_rbc_en_pos,
-					      reg_ofsm_read_rbc_en_len, &temp);
-		if (ret)
-			return ret;
-		if ((temp & 1) == 0)
-			*available = true;
-
-	}
-	return 0;
-}
-
-static int af9005_get_post_vit_err_cw_count(struct dvb_frontend *fe,
-					    u32 * post_err_count,
-					    u32 * post_cw_count,
-					    u16 * abort_count)
-{
-	struct af9005_fe_state *state = fe->demodulator_priv;
-	int ret;
-	u32 err_count;
-	u32 cw_count;
-	u8 temp, temp0, temp1, temp2;
-	u16 loc_abort_count;
-
-	*post_err_count = 0;
-	*post_cw_count = 0;
-
-	/* check if error bit count is ready */
-	ret =
-	    af9005_read_register_bits(state->d, xd_r_fec_rsd_ber_rdy,
-				      fec_rsd_ber_rdy_pos, fec_rsd_ber_rdy_len,
-				      &temp);
-	if (ret)
-		return ret;
-	if (!temp) {
-		deb_info("rsd counter not ready\n");
-		return 100;
-	}
-	/* get abort count */
-	ret =
-	    af9005_read_ofdm_register(state->d,
-				      xd_r_fec_rsd_abort_packet_cnt_7_0,
-				      &temp0);
-	if (ret)
-		return ret;
-	ret =
-	    af9005_read_ofdm_register(state->d,
-				      xd_r_fec_rsd_abort_packet_cnt_15_8,
-				      &temp1);
-	if (ret)
-		return ret;
-	loc_abort_count = ((u16) temp1 << 8) + temp0;
-
-	/* get error count */
-	ret =
-	    af9005_read_ofdm_register(state->d, xd_r_fec_rsd_bit_err_cnt_7_0,
-				      &temp0);
-	if (ret)
-		return ret;
-	ret =
-	    af9005_read_ofdm_register(state->d, xd_r_fec_rsd_bit_err_cnt_15_8,
-				      &temp1);
-	if (ret)
-		return ret;
-	ret =
-	    af9005_read_ofdm_register(state->d, xd_r_fec_rsd_bit_err_cnt_23_16,
-				      &temp2);
-	if (ret)
-		return ret;
-	err_count = ((u32) temp2 << 16) + ((u32) temp1 << 8) + temp0;
-	*post_err_count = err_count - (u32) loc_abort_count *8 * 8;
-
-	/* get RSD packet number */
-	ret =
-	    af9005_read_ofdm_register(state->d, xd_p_fec_rsd_packet_unit_7_0,
-				      &temp0);
-	if (ret)
-		return ret;
-	ret =
-	    af9005_read_ofdm_register(state->d, xd_p_fec_rsd_packet_unit_15_8,
-				      &temp1);
-	if (ret)
-		return ret;
-	cw_count = ((u32) temp1 << 8) + temp0;
-	if (cw_count == 0) {
-		err("wrong RSD packet count");
-		return -EIO;
-	}
-	deb_info("POST abort count %d err count %d rsd packets %d\n",
-		 loc_abort_count, err_count, cw_count);
-	*post_cw_count = cw_count - (u32) loc_abort_count;
-	*abort_count = loc_abort_count;
-	return 0;
-
-}
-
-static int af9005_get_post_vit_ber(struct dvb_frontend *fe,
-				   u32 * post_err_count, u32 * post_cw_count,
-				   u16 * abort_count)
-{
-	u32 loc_cw_count = 0, loc_err_count;
-	u16 loc_abort_count = 0;
-	int ret;
-
-	ret =
-	    af9005_get_post_vit_err_cw_count(fe, &loc_err_count, &loc_cw_count,
-					     &loc_abort_count);
-	if (ret)
-		return ret;
-	*post_err_count = loc_err_count;
-	*post_cw_count = loc_cw_count * 204 * 8;
-	*abort_count = loc_abort_count;
-
-	return 0;
-}
-
-static int af9005_get_pre_vit_err_bit_count(struct dvb_frontend *fe,
-					    u32 * pre_err_count,
-					    u32 * pre_bit_count)
-{
-	struct af9005_fe_state *state = fe->demodulator_priv;
-	u8 temp, temp0, temp1, temp2;
-	u32 super_frame_count, x, bits;
-	int ret;
-
-	ret =
-	    af9005_read_register_bits(state->d, xd_r_fec_vtb_ber_rdy,
-				      fec_vtb_ber_rdy_pos, fec_vtb_ber_rdy_len,
-				      &temp);
-	if (ret)
-		return ret;
-	if (!temp) {
-		deb_info("viterbi counter not ready\n");
-		return 101;	/* ERR_APO_VTB_COUNTER_NOT_READY; */
-	}
-	ret =
-	    af9005_read_ofdm_register(state->d, xd_r_fec_vtb_err_bit_cnt_7_0,
-				      &temp0);
-	if (ret)
-		return ret;
-	ret =
-	    af9005_read_ofdm_register(state->d, xd_r_fec_vtb_err_bit_cnt_15_8,
-				      &temp1);
-	if (ret)
-		return ret;
-	ret =
-	    af9005_read_ofdm_register(state->d, xd_r_fec_vtb_err_bit_cnt_23_16,
-				      &temp2);
-	if (ret)
-		return ret;
-	*pre_err_count = ((u32) temp2 << 16) + ((u32) temp1 << 8) + temp0;
-
-	ret =
-	    af9005_read_ofdm_register(state->d, xd_p_fec_super_frm_unit_7_0,
-				      &temp0);
-	if (ret)
-		return ret;
-	ret =
-	    af9005_read_ofdm_register(state->d, xd_p_fec_super_frm_unit_15_8,
-				      &temp1);
-	if (ret)
-		return ret;
-	super_frame_count = ((u32) temp1 << 8) + temp0;
-	if (super_frame_count == 0) {
-		deb_info("super frame count 0\n");
-		return 102;
-	}
-
-	/* read fft mode */
-	ret =
-	    af9005_read_register_bits(state->d, xd_g_reg_tpsd_txmod,
-				      reg_tpsd_txmod_pos, reg_tpsd_txmod_len,
-				      &temp);
-	if (ret)
-		return ret;
-	if (temp == 0) {
-		/* 2K */
-		x = 1512;
-	} else if (temp == 1) {
-		/* 8k */
-		x = 6048;
-	} else {
-		err("Invalid fft mode");
-		return -EINVAL;
-	}
-
-	/* read modulation mode */
-	ret =
-	    af9005_read_register_bits(state->d, xd_g_reg_tpsd_const,
-				      reg_tpsd_const_pos, reg_tpsd_const_len,
-				      &temp);
-	if (ret)
-		return ret;
-	switch (temp) {
-	case 0:		/* QPSK */
-		bits = 2;
-		break;
-	case 1:		/* QAM_16 */
-		bits = 4;
-		break;
-	case 2:		/* QAM_64 */
-		bits = 6;
-		break;
-	default:
-		err("invalid modulation mode");
-		return -EINVAL;
-	}
-	*pre_bit_count = super_frame_count * 68 * 4 * x * bits;
-	deb_info("PRE err count %d frame count %d bit count %d\n",
-		 *pre_err_count, super_frame_count, *pre_bit_count);
-	return 0;
-}
-
-static int af9005_reset_pre_viterbi(struct dvb_frontend *fe)
-{
-	struct af9005_fe_state *state = fe->demodulator_priv;
-	int ret;
-
-	/* set super frame count to 1 */
-	ret =
-	    af9005_write_ofdm_register(state->d, xd_p_fec_super_frm_unit_7_0,
-				       1 & 0xff);
-	if (ret)
-		return ret;
-	ret = af9005_write_ofdm_register(state->d, xd_p_fec_super_frm_unit_15_8,
-					 1 >> 8);
-	if (ret)
-		return ret;
-	/* reset pre viterbi error count */
-	ret =
-	    af9005_write_register_bits(state->d, xd_p_fec_vtb_ber_rst,
-				       fec_vtb_ber_rst_pos, fec_vtb_ber_rst_len,
-				       1);
-
-	return ret;
-}
-
-static int af9005_reset_post_viterbi(struct dvb_frontend *fe)
-{
-	struct af9005_fe_state *state = fe->demodulator_priv;
-	int ret;
-
-	/* set packet unit */
-	ret =
-	    af9005_write_ofdm_register(state->d, xd_p_fec_rsd_packet_unit_7_0,
-				       10000 & 0xff);
-	if (ret)
-		return ret;
-	ret =
-	    af9005_write_ofdm_register(state->d, xd_p_fec_rsd_packet_unit_15_8,
-				       10000 >> 8);
-	if (ret)
-		return ret;
-	/* reset post viterbi error count */
-	ret =
-	    af9005_write_register_bits(state->d, xd_p_fec_rsd_ber_rst,
-				       fec_rsd_ber_rst_pos, fec_rsd_ber_rst_len,
-				       1);
-
-	return ret;
-}
-
-static int af9005_get_statistic(struct dvb_frontend *fe)
-{
-	struct af9005_fe_state *state = fe->demodulator_priv;
-	int ret, fecavailable;
-	u64 numerator, denominator;
-
-	deb_info("GET STATISTIC\n");
-	ret = af9005_is_fecmon_available(fe, &fecavailable);
-	if (ret)
-		return ret;
-	if (!fecavailable) {
-		deb_info("fecmon not available\n");
-		return 0;
-	}
-
-	ret = af9005_get_pre_vit_err_bit_count(fe, &state->pre_vit_error_count,
-					       &state->pre_vit_bit_count);
-	if (ret == 0) {
-		af9005_reset_pre_viterbi(fe);
-		if (state->pre_vit_bit_count > 0) {
-			/* according to v 0.0.4 of the dvb api ber should be a multiple
-			   of 10E-9 so we have to multiply the error count by
-			   10E9=1000000000 */
-			numerator =
-			    (u64) state->pre_vit_error_count * (u64) 1000000000;
-			denominator = (u64) state->pre_vit_bit_count;
-			state->ber = do_div(numerator, denominator);
-		} else {
-			state->ber = 0xffffffff;
-		}
-	}
-
-	ret = af9005_get_post_vit_ber(fe, &state->post_vit_error_count,
-				      &state->post_vit_bit_count,
-				      &state->abort_count);
-	if (ret == 0) {
-		ret = af9005_reset_post_viterbi(fe);
-		state->unc += state->abort_count;
-		if (ret)
-			return ret;
-	}
-	return 0;
-}
-
-static int af9005_fe_refresh_state(struct dvb_frontend *fe)
-{
-	struct af9005_fe_state *state = fe->demodulator_priv;
-	if (time_after(jiffies, state->next_status_check)) {
-		deb_info("REFRESH STATE\n");
-
-		/* statistics */
-		if (af9005_get_statistic(fe))
-			err("get_statistic_failed");
-		state->next_status_check = jiffies + 250 * HZ / 1000;
-	}
-	return 0;
-}
-
-static int af9005_fe_read_status(struct dvb_frontend *fe, fe_status_t * stat)
-{
-	struct af9005_fe_state *state = fe->demodulator_priv;
-	u8 temp;
-	int ret;
-
-	if (fe->ops.tuner_ops.release == NULL)
-		return -ENODEV;
-
-	*stat = 0;
-	ret = af9005_read_register_bits(state->d, xd_p_agc_lock,
-					agc_lock_pos, agc_lock_len, &temp);
-	if (ret)
-		return ret;
-	if (temp)
-		*stat |= FE_HAS_SIGNAL;
-
-	ret = af9005_read_register_bits(state->d, xd_p_fd_tpsd_lock,
-					fd_tpsd_lock_pos, fd_tpsd_lock_len,
-					&temp);
-	if (ret)
-		return ret;
-	if (temp)
-		*stat |= FE_HAS_CARRIER;
-
-	ret = af9005_read_register_bits(state->d,
-					xd_r_mp2if_sync_byte_locked,
-					mp2if_sync_byte_locked_pos,
-					mp2if_sync_byte_locked_pos, &temp);
-	if (ret)
-		return ret;
-	if (temp)
-		*stat |= FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_LOCK;
-	if (state->opened)
-		af9005_led_control(state->d, *stat & FE_HAS_LOCK);
-
-	ret =
-	    af9005_read_register_bits(state->d, xd_p_reg_strong_sginal_detected,
-				      reg_strong_sginal_detected_pos,
-				      reg_strong_sginal_detected_len, &temp);
-	if (ret)
-		return ret;
-	if (temp != state->strong) {
-		deb_info("adjust for strong signal %d\n", temp);
-			state->strong = temp;
-	}
-	return 0;
-}
-
-static int af9005_fe_read_ber(struct dvb_frontend *fe, u32 * ber)
-{
-	struct af9005_fe_state *state = fe->demodulator_priv;
-	if (fe->ops.tuner_ops.release  == NULL)
-		return -ENODEV;
-	af9005_fe_refresh_state(fe);
-	*ber = state->ber;
-	return 0;
-}
-
-static int af9005_fe_read_unc_blocks(struct dvb_frontend *fe, u32 * unc)
-{
-	struct af9005_fe_state *state = fe->demodulator_priv;
-	if (fe->ops.tuner_ops.release == NULL)
-		return -ENODEV;
-	af9005_fe_refresh_state(fe);
-	*unc = state->unc;
-	return 0;
-}
-
-static int af9005_fe_read_signal_strength(struct dvb_frontend *fe,
-					  u16 * strength)
-{
-	struct af9005_fe_state *state = fe->demodulator_priv;
-	int ret;
-	u8 if_gain, rf_gain;
-
-	if (fe->ops.tuner_ops.release == NULL)
-		return -ENODEV;
-	ret =
-	    af9005_read_ofdm_register(state->d, xd_r_reg_aagc_rf_gain,
-				      &rf_gain);
-	if (ret)
-		return ret;
-	ret =
-	    af9005_read_ofdm_register(state->d, xd_r_reg_aagc_if_gain,
-				      &if_gain);
-	if (ret)
-		return ret;
-	/* this value has no real meaning, but i don't have the tables that relate
-	   the rf and if gain with the dbm, so I just scale the value */
-	*strength = (512 - rf_gain - if_gain) << 7;
-	return 0;
-}
-
-static int af9005_fe_read_snr(struct dvb_frontend *fe, u16 * snr)
-{
-	/* the snr can be derived from the ber and the modulation
-	   but I don't think this kind of complex calculations belong
-	   in the driver. I may be wrong.... */
-	return -ENOSYS;
-}
-
-static int af9005_fe_program_cfoe(struct dvb_usb_device *d, u32 bw)
-{
-	u8 temp0, temp1, temp2, temp3, buf[4];
-	int ret;
-	u32 NS_coeff1_2048Nu;
-	u32 NS_coeff1_8191Nu;
-	u32 NS_coeff1_8192Nu;
-	u32 NS_coeff1_8193Nu;
-	u32 NS_coeff2_2k;
-	u32 NS_coeff2_8k;
-
-	switch (bw) {
-	case 6000000:
-		NS_coeff1_2048Nu = 0x2ADB6DC;
-		NS_coeff1_8191Nu = 0xAB7313;
-		NS_coeff1_8192Nu = 0xAB6DB7;
-		NS_coeff1_8193Nu = 0xAB685C;
-		NS_coeff2_2k = 0x156DB6E;
-		NS_coeff2_8k = 0x55B6DC;
-		break;
-
-	case 7000000:
-		NS_coeff1_2048Nu = 0x3200001;
-		NS_coeff1_8191Nu = 0xC80640;
-		NS_coeff1_8192Nu = 0xC80000;
-		NS_coeff1_8193Nu = 0xC7F9C0;
-		NS_coeff2_2k = 0x1900000;
-		NS_coeff2_8k = 0x640000;
-		break;
-
-	case 8000000:
-		NS_coeff1_2048Nu = 0x3924926;
-		NS_coeff1_8191Nu = 0xE4996E;
-		NS_coeff1_8192Nu = 0xE49249;
-		NS_coeff1_8193Nu = 0xE48B25;
-		NS_coeff2_2k = 0x1C92493;
-		NS_coeff2_8k = 0x724925;
-		break;
-	default:
-		err("Invalid bandwidth %d.", bw);
-		return -EINVAL;
-	}
-
-	/*
-	 *  write NS_coeff1_2048Nu
-	 */
-
-	temp0 = (u8) (NS_coeff1_2048Nu & 0x000000FF);
-	temp1 = (u8) ((NS_coeff1_2048Nu & 0x0000FF00) >> 8);
-	temp2 = (u8) ((NS_coeff1_2048Nu & 0x00FF0000) >> 16);
-	temp3 = (u8) ((NS_coeff1_2048Nu & 0x03000000) >> 24);
-
-	/*  big endian to make 8051 happy */
-	buf[0] = temp3;
-	buf[1] = temp2;
-	buf[2] = temp1;
-	buf[3] = temp0;
-
-	/*  cfoe_NS_2k_coeff1_25_24 */
-	ret = af9005_write_ofdm_register(d, 0xAE00, buf[0]);
-	if (ret)
-		return ret;
-
-	/*  cfoe_NS_2k_coeff1_23_16 */
-	ret = af9005_write_ofdm_register(d, 0xAE01, buf[1]);
-	if (ret)
-		return ret;
-
-	/*  cfoe_NS_2k_coeff1_15_8 */
-	ret = af9005_write_ofdm_register(d, 0xAE02, buf[2]);
-	if (ret)
-		return ret;
-
-	/*  cfoe_NS_2k_coeff1_7_0 */
-	ret = af9005_write_ofdm_register(d, 0xAE03, buf[3]);
-	if (ret)
-		return ret;
-
-	/*
-	 *  write NS_coeff2_2k
-	 */
-
-	temp0 = (u8) ((NS_coeff2_2k & 0x0000003F));
-	temp1 = (u8) ((NS_coeff2_2k & 0x00003FC0) >> 6);
-	temp2 = (u8) ((NS_coeff2_2k & 0x003FC000) >> 14);
-	temp3 = (u8) ((NS_coeff2_2k & 0x01C00000) >> 22);
-
-	/*  big endian to make 8051 happy */
-	buf[0] = temp3;
-	buf[1] = temp2;
-	buf[2] = temp1;
-	buf[3] = temp0;
-
-	ret = af9005_write_ofdm_register(d, 0xAE04, buf[0]);
-	if (ret)
-		return ret;
-
-	ret = af9005_write_ofdm_register(d, 0xAE05, buf[1]);
-	if (ret)
-		return ret;
-
-	ret = af9005_write_ofdm_register(d, 0xAE06, buf[2]);
-	if (ret)
-		return ret;
-
-	ret = af9005_write_ofdm_register(d, 0xAE07, buf[3]);
-	if (ret)
-		return ret;
-
-	/*
-	 *  write NS_coeff1_8191Nu
-	 */
-
-	temp0 = (u8) ((NS_coeff1_8191Nu & 0x000000FF));
-	temp1 = (u8) ((NS_coeff1_8191Nu & 0x0000FF00) >> 8);
-	temp2 = (u8) ((NS_coeff1_8191Nu & 0x00FFC000) >> 16);
-	temp3 = (u8) ((NS_coeff1_8191Nu & 0x03000000) >> 24);
-
-	/*  big endian to make 8051 happy */
-	buf[0] = temp3;
-	buf[1] = temp2;
-	buf[2] = temp1;
-	buf[3] = temp0;
-
-	ret = af9005_write_ofdm_register(d, 0xAE08, buf[0]);
-	if (ret)
-		return ret;
-
-	ret = af9005_write_ofdm_register(d, 0xAE09, buf[1]);
-	if (ret)
-		return ret;
-
-	ret = af9005_write_ofdm_register(d, 0xAE0A, buf[2]);
-	if (ret)
-		return ret;
-
-	ret = af9005_write_ofdm_register(d, 0xAE0B, buf[3]);
-	if (ret)
-		return ret;
-
-	/*
-	 *  write NS_coeff1_8192Nu
-	 */
-
-	temp0 = (u8) (NS_coeff1_8192Nu & 0x000000FF);
-	temp1 = (u8) ((NS_coeff1_8192Nu & 0x0000FF00) >> 8);
-	temp2 = (u8) ((NS_coeff1_8192Nu & 0x00FFC000) >> 16);
-	temp3 = (u8) ((NS_coeff1_8192Nu & 0x03000000) >> 24);
-
-	/*  big endian to make 8051 happy */
-	buf[0] = temp3;
-	buf[1] = temp2;
-	buf[2] = temp1;
-	buf[3] = temp0;
-
-	ret = af9005_write_ofdm_register(d, 0xAE0C, buf[0]);
-	if (ret)
-		return ret;
-
-	ret = af9005_write_ofdm_register(d, 0xAE0D, buf[1]);
-	if (ret)
-		return ret;
-
-	ret = af9005_write_ofdm_register(d, 0xAE0E, buf[2]);
-	if (ret)
-		return ret;
-
-	ret = af9005_write_ofdm_register(d, 0xAE0F, buf[3]);
-	if (ret)
-		return ret;
-
-	/*
-	 *  write NS_coeff1_8193Nu
-	 */
-
-	temp0 = (u8) ((NS_coeff1_8193Nu & 0x000000FF));
-	temp1 = (u8) ((NS_coeff1_8193Nu & 0x0000FF00) >> 8);
-	temp2 = (u8) ((NS_coeff1_8193Nu & 0x00FFC000) >> 16);
-	temp3 = (u8) ((NS_coeff1_8193Nu & 0x03000000) >> 24);
-
-	/*  big endian to make 8051 happy */
-	buf[0] = temp3;
-	buf[1] = temp2;
-	buf[2] = temp1;
-	buf[3] = temp0;
-
-	ret = af9005_write_ofdm_register(d, 0xAE10, buf[0]);
-	if (ret)
-		return ret;
-
-	ret = af9005_write_ofdm_register(d, 0xAE11, buf[1]);
-	if (ret)
-		return ret;
-
-	ret = af9005_write_ofdm_register(d, 0xAE12, buf[2]);
-	if (ret)
-		return ret;
-
-	ret = af9005_write_ofdm_register(d, 0xAE13, buf[3]);
-	if (ret)
-		return ret;
-
-	/*
-	 *  write NS_coeff2_8k
-	 */
-
-	temp0 = (u8) ((NS_coeff2_8k & 0x0000003F));
-	temp1 = (u8) ((NS_coeff2_8k & 0x00003FC0) >> 6);
-	temp2 = (u8) ((NS_coeff2_8k & 0x003FC000) >> 14);
-	temp3 = (u8) ((NS_coeff2_8k & 0x01C00000) >> 22);
-
-	/*  big endian to make 8051 happy */
-	buf[0] = temp3;
-	buf[1] = temp2;
-	buf[2] = temp1;
-	buf[3] = temp0;
-
-	ret = af9005_write_ofdm_register(d, 0xAE14, buf[0]);
-	if (ret)
-		return ret;
-
-	ret = af9005_write_ofdm_register(d, 0xAE15, buf[1]);
-	if (ret)
-		return ret;
-
-	ret = af9005_write_ofdm_register(d, 0xAE16, buf[2]);
-	if (ret)
-		return ret;
-
-	ret = af9005_write_ofdm_register(d, 0xAE17, buf[3]);
-	return ret;
-
-}
-
-static int af9005_fe_select_bw(struct dvb_usb_device *d, u32 bw)
-{
-	u8 temp;
-	switch (bw) {
-	case 6000000:
-		temp = 0;
-		break;
-	case 7000000:
-		temp = 1;
-		break;
-	case 8000000:
-		temp = 2;
-		break;
-	default:
-		err("Invalid bandwidth %d.", bw);
-		return -EINVAL;
-	}
-	return af9005_write_register_bits(d, xd_g_reg_bw, reg_bw_pos,
-					  reg_bw_len, temp);
-}
-
-static int af9005_fe_power(struct dvb_frontend *fe, int on)
-{
-	struct af9005_fe_state *state = fe->demodulator_priv;
-	u8 temp = on;
-	int ret;
-	deb_info("power %s tuner\n", on ? "on" : "off");
-	ret = af9005_send_command(state->d, 0x03, &temp, 1, NULL, 0);
-	return ret;
-}
-
-static struct mt2060_config af9005_mt2060_config = {
-	0xC0
-};
-
-static struct qt1010_config af9005_qt1010_config = {
-	0xC4
-};
-
-static int af9005_fe_init(struct dvb_frontend *fe)
-{
-	struct af9005_fe_state *state = fe->demodulator_priv;
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	int ret, i, scriptlen;
-	u8 temp, temp0 = 0, temp1 = 0, temp2 = 0;
-	u8 buf[2];
-	u16 if1;
-
-	deb_info("in af9005_fe_init\n");
-
-	/* reset */
-	deb_info("reset\n");
-	if ((ret =
-	     af9005_write_register_bits(state->d, xd_I2C_reg_ofdm_rst_en,
-					4, 1, 0x01)))
-		return ret;
-	if ((ret = af9005_write_ofdm_register(state->d, APO_REG_RESET, 0)))
-		return ret;
-	/* clear ofdm reset */
-	deb_info("clear ofdm reset\n");
-	for (i = 0; i < 150; i++) {
-		if ((ret =
-		     af9005_read_ofdm_register(state->d,
-					       xd_I2C_reg_ofdm_rst, &temp)))
-			return ret;
-		if (temp & (regmask[reg_ofdm_rst_len - 1] << reg_ofdm_rst_pos))
-			break;
-		msleep(10);
-	}
-	if (i == 150)
-		return -ETIMEDOUT;
-
-	/*FIXME in the dump
-	   write B200 A9
-	   write xd_g_reg_ofsm_clk 7
-	   read eepr c6 (2)
-	   read eepr c7 (2)
-	   misc ctrl 3 -> 1
-	   read eepr ca (6)
-	   write xd_g_reg_ofsm_clk 0
-	   write B200 a1
-	 */
-	ret = af9005_write_ofdm_register(state->d, 0xb200, 0xa9);
-	if (ret)
-		return ret;
-	ret = af9005_write_ofdm_register(state->d, xd_g_reg_ofsm_clk, 0x07);
-	if (ret)
-		return ret;
-	temp = 0x01;
-	ret = af9005_send_command(state->d, 0x03, &temp, 1, NULL, 0);
-	if (ret)
-		return ret;
-	ret = af9005_write_ofdm_register(state->d, xd_g_reg_ofsm_clk, 0x00);
-	if (ret)
-		return ret;
-	ret = af9005_write_ofdm_register(state->d, 0xb200, 0xa1);
-	if (ret)
-		return ret;
-
-	temp = regmask[reg_ofdm_rst_len - 1] << reg_ofdm_rst_pos;
-	if ((ret =
-	     af9005_write_register_bits(state->d, xd_I2C_reg_ofdm_rst,
-					reg_ofdm_rst_pos, reg_ofdm_rst_len, 1)))
-		return ret;
-	ret = af9005_write_register_bits(state->d, xd_I2C_reg_ofdm_rst,
-					 reg_ofdm_rst_pos, reg_ofdm_rst_len, 0);
-
-	if (ret)
-		return ret;
-	/* don't know what register aefc is, but this is what the windows driver does */
-	ret = af9005_write_ofdm_register(state->d, 0xaefc, 0);
-	if (ret)
-		return ret;
-
-	/* set stand alone chip */
-	deb_info("set stand alone chip\n");
-	if ((ret =
-	     af9005_write_register_bits(state->d, xd_p_reg_dca_stand_alone,
-					reg_dca_stand_alone_pos,
-					reg_dca_stand_alone_len, 1)))
-		return ret;
-
-	/* set dca upper & lower chip */
-	deb_info("set dca upper & lower chip\n");
-	if ((ret =
-	     af9005_write_register_bits(state->d, xd_p_reg_dca_upper_chip,
-					reg_dca_upper_chip_pos,
-					reg_dca_upper_chip_len, 0)))
-		return ret;
-	if ((ret =
-	     af9005_write_register_bits(state->d, xd_p_reg_dca_lower_chip,
-					reg_dca_lower_chip_pos,
-					reg_dca_lower_chip_len, 0)))
-		return ret;
-
-	/* set 2wire master clock to 0x14 (for 60KHz) */
-	deb_info("set 2wire master clock to 0x14 (for 60KHz)\n");
-	if ((ret =
-	     af9005_write_ofdm_register(state->d, xd_I2C_i2c_m_period, 0x14)))
-		return ret;
-
-	/* clear dca enable chip */
-	deb_info("clear dca enable chip\n");
-	if ((ret =
-	     af9005_write_register_bits(state->d, xd_p_reg_dca_en,
-					reg_dca_en_pos, reg_dca_en_len, 0)))
-		return ret;
-	/* FIXME these are register bits, but I don't know which ones */
-	ret = af9005_write_ofdm_register(state->d, 0xa16c, 1);
-	if (ret)
-		return ret;
-	ret = af9005_write_ofdm_register(state->d, 0xa3c1, 0);
-	if (ret)
-		return ret;
-
-	/* init other parameters: program cfoe and select bandwidth */
-	deb_info("program cfoe\n");
-	ret = af9005_fe_program_cfoe(state->d, 6000000);
-	if (ret)
-		return ret;
-	/* set read-update bit for modulation */
-	deb_info("set read-update bit for modulation\n");
-	if ((ret =
-	     af9005_write_register_bits(state->d, xd_p_reg_feq_read_update,
-					reg_feq_read_update_pos,
-					reg_feq_read_update_len, 1)))
-		return ret;
-
-	/* sample code has a set MPEG TS code here
-	   but sniffing reveals that it doesn't do it */
-
-	/* set read-update bit to 1 for DCA modulation */
-	deb_info("set read-update bit 1 for DCA modulation\n");
-	if ((ret =
-	     af9005_write_register_bits(state->d, xd_p_reg_dca_read_update,
-					reg_dca_read_update_pos,
-					reg_dca_read_update_len, 1)))
-		return ret;
-
-	/* enable fec monitor */
-	deb_info("enable fec monitor\n");
-	if ((ret =
-	     af9005_write_register_bits(state->d, xd_p_fec_vtb_rsd_mon_en,
-					fec_vtb_rsd_mon_en_pos,
-					fec_vtb_rsd_mon_en_len, 1)))
-		return ret;
-
-	/* FIXME should be register bits, I don't know which ones */
-	ret = af9005_write_ofdm_register(state->d, 0xa601, 0);
-
-	/* set api_retrain_never_freeze */
-	deb_info("set api_retrain_never_freeze\n");
-	if ((ret = af9005_write_ofdm_register(state->d, 0xaefb, 0x01)))
-		return ret;
-
-	/* load init script */
-	deb_info("load init script\n");
-	scriptlen = sizeof(script) / sizeof(RegDesc);
-	for (i = 0; i < scriptlen; i++) {
-		if ((ret =
-		     af9005_write_register_bits(state->d, script[i].reg,
-						script[i].pos,
-						script[i].len, script[i].val)))
-			return ret;
-		/* save 3 bytes of original fcw */
-		if (script[i].reg == 0xae18)
-			temp2 = script[i].val;
-		if (script[i].reg == 0xae19)
-			temp1 = script[i].val;
-		if (script[i].reg == 0xae1a)
-			temp0 = script[i].val;
-
-		/* save original unplug threshold */
-		if (script[i].reg == xd_p_reg_unplug_th)
-			state->original_if_unplug_th = script[i].val;
-		if (script[i].reg == xd_p_reg_unplug_rf_gain_th)
-			state->original_rf_unplug_th = script[i].val;
-		if (script[i].reg == xd_p_reg_unplug_dtop_if_gain_th)
-			state->original_dtop_if_unplug_th = script[i].val;
-		if (script[i].reg == xd_p_reg_unplug_dtop_rf_gain_th)
-			state->original_dtop_rf_unplug_th = script[i].val;
-
-	}
-	state->original_fcw =
-	    ((u32) temp2 << 16) + ((u32) temp1 << 8) + (u32) temp0;
-
-
-	/* save original TOPs */
-	deb_info("save original TOPs\n");
-
-	/*  RF TOP */
-	ret =
-	    af9005_read_word_agc(state->d,
-				 xd_p_reg_aagc_rf_top_numerator_9_8,
-				 xd_p_reg_aagc_rf_top_numerator_7_0, 0, 2,
-				 &state->original_rf_top);
-	if (ret)
-		return ret;
-
-	/*  IF TOP */
-	ret =
-	    af9005_read_word_agc(state->d,
-				 xd_p_reg_aagc_if_top_numerator_9_8,
-				 xd_p_reg_aagc_if_top_numerator_7_0, 0, 2,
-				 &state->original_if_top);
-	if (ret)
-		return ret;
-
-	/*  ACI 0 IF TOP */
-	ret =
-	    af9005_read_word_agc(state->d, 0xA60E, 0xA60A, 4, 2,
-				 &state->original_aci0_if_top);
-	if (ret)
-		return ret;
-
-	/*  ACI 1 IF TOP */
-	ret =
-	    af9005_read_word_agc(state->d, 0xA60E, 0xA60B, 6, 2,
-				 &state->original_aci1_if_top);
-	if (ret)
-		return ret;
-
-	/* attach tuner and init */
-	if (fe->ops.tuner_ops.release == NULL) {
-		/* read tuner and board id from eeprom */
-		ret = af9005_read_eeprom(adap->dev, 0xc6, buf, 2);
-		if (ret) {
-			err("Impossible to read EEPROM\n");
-			return ret;
-		}
-		deb_info("Tuner id %d, board id %d\n", buf[0], buf[1]);
-		switch (buf[0]) {
-		case 2:	/* MT2060 */
-			/* read if1 from eeprom */
-			ret = af9005_read_eeprom(adap->dev, 0xc8, buf, 2);
-			if (ret) {
-				err("Impossible to read EEPROM\n");
-				return ret;
-			}
-			if1 = (u16) (buf[0] << 8) + buf[1];
-			if (dvb_attach(mt2060_attach, fe, &adap->dev->i2c_adap,
-					 &af9005_mt2060_config, if1) == NULL) {
-				deb_info("MT2060 attach failed\n");
-				return -ENODEV;
-			}
-			break;
-		case 3:	/* QT1010 */
-		case 9:	/* QT1010B */
-			if (dvb_attach(qt1010_attach, fe, &adap->dev->i2c_adap,
-					&af9005_qt1010_config) ==NULL) {
-				deb_info("QT1010 attach failed\n");
-				return -ENODEV;
-			}
-			break;
-		default:
-			err("Unsupported tuner type %d", buf[0]);
-			return -ENODEV;
-		}
-		ret = fe->ops.tuner_ops.init(fe);
-		if (ret)
-			return ret;
-	}
-
-	deb_info("profit!\n");
-	return 0;
-}
-
-static int af9005_fe_sleep(struct dvb_frontend *fe)
-{
-	return af9005_fe_power(fe, 0);
-}
-
-static int af9005_ts_bus_ctrl(struct dvb_frontend *fe, int acquire)
-{
-	struct af9005_fe_state *state = fe->demodulator_priv;
-
-	if (acquire) {
-		state->opened++;
-	} else {
-
-		state->opened--;
-		if (!state->opened)
-			af9005_led_control(state->d, 0);
-	}
-	return 0;
-}
-
-static int af9005_fe_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
-	struct af9005_fe_state *state = fe->demodulator_priv;
-	int ret;
-	u8 temp, temp0, temp1, temp2;
-
-	deb_info("af9005_fe_set_frontend freq %d bw %d\n", fep->frequency,
-		 fep->bandwidth_hz);
-	if (fe->ops.tuner_ops.release == NULL) {
-		err("Tuner not attached");
-		return -ENODEV;
-	}
-
-	deb_info("turn off led\n");
-	/* not in the log */
-	ret = af9005_led_control(state->d, 0);
-	if (ret)
-		return ret;
-	/* not sure about the bits */
-	ret = af9005_write_register_bits(state->d, XD_MP2IF_MISC, 2, 1, 0);
-	if (ret)
-		return ret;
-
-	/* set FCW to default value */
-	deb_info("set FCW to default value\n");
-	temp0 = (u8) (state->original_fcw & 0x000000ff);
-	temp1 = (u8) ((state->original_fcw & 0x0000ff00) >> 8);
-	temp2 = (u8) ((state->original_fcw & 0x00ff0000) >> 16);
-	ret = af9005_write_ofdm_register(state->d, 0xae1a, temp0);
-	if (ret)
-		return ret;
-	ret = af9005_write_ofdm_register(state->d, 0xae19, temp1);
-	if (ret)
-		return ret;
-	ret = af9005_write_ofdm_register(state->d, 0xae18, temp2);
-	if (ret)
-		return ret;
-
-	/* restore original TOPs */
-	deb_info("restore original TOPs\n");
-	ret =
-	    af9005_write_word_agc(state->d,
-				  xd_p_reg_aagc_rf_top_numerator_9_8,
-				  xd_p_reg_aagc_rf_top_numerator_7_0, 0, 2,
-				  state->original_rf_top);
-	if (ret)
-		return ret;
-	ret =
-	    af9005_write_word_agc(state->d,
-				  xd_p_reg_aagc_if_top_numerator_9_8,
-				  xd_p_reg_aagc_if_top_numerator_7_0, 0, 2,
-				  state->original_if_top);
-	if (ret)
-		return ret;
-	ret =
-	    af9005_write_word_agc(state->d, 0xA60E, 0xA60A, 4, 2,
-				  state->original_aci0_if_top);
-	if (ret)
-		return ret;
-	ret =
-	    af9005_write_word_agc(state->d, 0xA60E, 0xA60B, 6, 2,
-				  state->original_aci1_if_top);
-	if (ret)
-		return ret;
-
-	/* select bandwidth */
-	deb_info("select bandwidth");
-	ret = af9005_fe_select_bw(state->d, fep->bandwidth_hz);
-	if (ret)
-		return ret;
-	ret = af9005_fe_program_cfoe(state->d, fep->bandwidth_hz);
-	if (ret)
-		return ret;
-
-	/* clear easy mode flag */
-	deb_info("clear easy mode flag\n");
-	ret = af9005_write_ofdm_register(state->d, 0xaefd, 0);
-	if (ret)
-		return ret;
-
-	/* set unplug threshold to original value */
-	deb_info("set unplug threshold to original value\n");
-	ret =
-	    af9005_write_ofdm_register(state->d, xd_p_reg_unplug_th,
-				       state->original_if_unplug_th);
-	if (ret)
-		return ret;
-	/* set tuner */
-	deb_info("set tuner\n");
-	ret = fe->ops.tuner_ops.set_params(fe);
-	if (ret)
-		return ret;
-
-	/* trigger ofsm */
-	deb_info("trigger ofsm\n");
-	temp = 0;
-	ret = af9005_write_tuner_registers(state->d, 0xffff, &temp, 1);
-	if (ret)
-		return ret;
-
-	/* clear retrain and freeze flag */
-	deb_info("clear retrain and freeze flag\n");
-	ret =
-	    af9005_write_register_bits(state->d,
-				       xd_p_reg_api_retrain_request,
-				       reg_api_retrain_request_pos, 2, 0);
-	if (ret)
-		return ret;
-
-	/* reset pre viterbi and post viterbi registers and statistics */
-	af9005_reset_pre_viterbi(fe);
-	af9005_reset_post_viterbi(fe);
-	state->pre_vit_error_count = 0;
-	state->pre_vit_bit_count = 0;
-	state->ber = 0;
-	state->post_vit_error_count = 0;
-	/* state->unc = 0; commented out since it should be ever increasing */
-	state->abort_count = 0;
-
-	state->next_status_check = jiffies;
-	state->strong = -1;
-
-	return 0;
-}
-
-static int af9005_fe_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
-	struct af9005_fe_state *state = fe->demodulator_priv;
-	int ret;
-	u8 temp;
-
-	/* mode */
-	ret =
-	    af9005_read_register_bits(state->d, xd_g_reg_tpsd_const,
-				      reg_tpsd_const_pos, reg_tpsd_const_len,
-				      &temp);
-	if (ret)
-		return ret;
-	deb_info("===== fe_get_frontend_legacy = =============\n");
-	deb_info("CONSTELLATION ");
-	switch (temp) {
-	case 0:
-		fep->modulation = QPSK;
-		deb_info("QPSK\n");
-		break;
-	case 1:
-		fep->modulation = QAM_16;
-		deb_info("QAM_16\n");
-		break;
-	case 2:
-		fep->modulation = QAM_64;
-		deb_info("QAM_64\n");
-		break;
-	}
-
-	/* tps hierarchy and alpha value */
-	ret =
-	    af9005_read_register_bits(state->d, xd_g_reg_tpsd_hier,
-				      reg_tpsd_hier_pos, reg_tpsd_hier_len,
-				      &temp);
-	if (ret)
-		return ret;
-	deb_info("HIERARCHY ");
-	switch (temp) {
-	case 0:
-		fep->hierarchy = HIERARCHY_NONE;
-		deb_info("NONE\n");
-		break;
-	case 1:
-		fep->hierarchy = HIERARCHY_1;
-		deb_info("1\n");
-		break;
-	case 2:
-		fep->hierarchy = HIERARCHY_2;
-		deb_info("2\n");
-		break;
-	case 3:
-		fep->hierarchy = HIERARCHY_4;
-		deb_info("4\n");
-		break;
-	}
-
-	/*  high/low priority     */
-	ret =
-	    af9005_read_register_bits(state->d, xd_g_reg_dec_pri,
-				      reg_dec_pri_pos, reg_dec_pri_len, &temp);
-	if (ret)
-		return ret;
-	/* if temp is set = high priority */
-	deb_info("PRIORITY %s\n", temp ? "high" : "low");
-
-	/* high coderate */
-	ret =
-	    af9005_read_register_bits(state->d, xd_g_reg_tpsd_hpcr,
-				      reg_tpsd_hpcr_pos, reg_tpsd_hpcr_len,
-				      &temp);
-	if (ret)
-		return ret;
-	deb_info("CODERATE HP ");
-	switch (temp) {
-	case 0:
-		fep->code_rate_HP = FEC_1_2;
-		deb_info("FEC_1_2\n");
-		break;
-	case 1:
-		fep->code_rate_HP = FEC_2_3;
-		deb_info("FEC_2_3\n");
-		break;
-	case 2:
-		fep->code_rate_HP = FEC_3_4;
-		deb_info("FEC_3_4\n");
-		break;
-	case 3:
-		fep->code_rate_HP = FEC_5_6;
-		deb_info("FEC_5_6\n");
-		break;
-	case 4:
-		fep->code_rate_HP = FEC_7_8;
-		deb_info("FEC_7_8\n");
-		break;
-	}
-
-	/* low coderate */
-	ret =
-	    af9005_read_register_bits(state->d, xd_g_reg_tpsd_lpcr,
-				      reg_tpsd_lpcr_pos, reg_tpsd_lpcr_len,
-				      &temp);
-	if (ret)
-		return ret;
-	deb_info("CODERATE LP ");
-	switch (temp) {
-	case 0:
-		fep->code_rate_LP = FEC_1_2;
-		deb_info("FEC_1_2\n");
-		break;
-	case 1:
-		fep->code_rate_LP = FEC_2_3;
-		deb_info("FEC_2_3\n");
-		break;
-	case 2:
-		fep->code_rate_LP = FEC_3_4;
-		deb_info("FEC_3_4\n");
-		break;
-	case 3:
-		fep->code_rate_LP = FEC_5_6;
-		deb_info("FEC_5_6\n");
-		break;
-	case 4:
-		fep->code_rate_LP = FEC_7_8;
-		deb_info("FEC_7_8\n");
-		break;
-	}
-
-	/* guard interval */
-	ret =
-	    af9005_read_register_bits(state->d, xd_g_reg_tpsd_gi,
-				      reg_tpsd_gi_pos, reg_tpsd_gi_len, &temp);
-	if (ret)
-		return ret;
-	deb_info("GUARD INTERVAL ");
-	switch (temp) {
-	case 0:
-		fep->guard_interval = GUARD_INTERVAL_1_32;
-		deb_info("1_32\n");
-		break;
-	case 1:
-		fep->guard_interval = GUARD_INTERVAL_1_16;
-		deb_info("1_16\n");
-		break;
-	case 2:
-		fep->guard_interval = GUARD_INTERVAL_1_8;
-		deb_info("1_8\n");
-		break;
-	case 3:
-		fep->guard_interval = GUARD_INTERVAL_1_4;
-		deb_info("1_4\n");
-		break;
-	}
-
-	/* fft */
-	ret =
-	    af9005_read_register_bits(state->d, xd_g_reg_tpsd_txmod,
-				      reg_tpsd_txmod_pos, reg_tpsd_txmod_len,
-				      &temp);
-	if (ret)
-		return ret;
-	deb_info("TRANSMISSION MODE ");
-	switch (temp) {
-	case 0:
-		fep->transmission_mode = TRANSMISSION_MODE_2K;
-		deb_info("2K\n");
-		break;
-	case 1:
-		fep->transmission_mode = TRANSMISSION_MODE_8K;
-		deb_info("8K\n");
-		break;
-	}
-
-	/* bandwidth      */
-	ret =
-	    af9005_read_register_bits(state->d, xd_g_reg_bw, reg_bw_pos,
-				      reg_bw_len, &temp);
-	deb_info("BANDWIDTH ");
-	switch (temp) {
-	case 0:
-		fep->bandwidth_hz = 6000000;
-		deb_info("6\n");
-		break;
-	case 1:
-		fep->bandwidth_hz = 7000000;
-		deb_info("7\n");
-		break;
-	case 2:
-		fep->bandwidth_hz = 8000000;
-		deb_info("8\n");
-		break;
-	}
-	return 0;
-}
-
-static void af9005_fe_release(struct dvb_frontend *fe)
-{
-	struct af9005_fe_state *state =
-	    (struct af9005_fe_state *)fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops af9005_fe_ops;
-
-struct dvb_frontend *af9005_fe_attach(struct dvb_usb_device *d)
-{
-	struct af9005_fe_state *state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct af9005_fe_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	deb_info("attaching frontend af9005\n");
-
-	state->d = d;
-	state->opened = 0;
-
-	memcpy(&state->frontend.ops, &af9005_fe_ops,
-	       sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-
-	return &state->frontend;
-      error:
-	return NULL;
-}
-
-static struct dvb_frontend_ops af9005_fe_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		 .name = "AF9005 USB DVB-T",
-		 .frequency_min = 44250000,
-		 .frequency_max = 867250000,
-		 .frequency_stepsize = 250000,
-		 .caps = FE_CAN_INVERSION_AUTO |
-		 FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-		 FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-		 FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
-		 FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO |
-		 FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER |
-		 FE_CAN_HIERARCHY_AUTO,
-		 },
-
-	.release = af9005_fe_release,
-
-	.init = af9005_fe_init,
-	.sleep = af9005_fe_sleep,
-	.ts_bus_ctrl = af9005_ts_bus_ctrl,
-
-	.set_frontend = af9005_fe_set_frontend,
-	.get_frontend = af9005_fe_get_frontend,
-
-	.read_status = af9005_fe_read_status,
-	.read_ber = af9005_fe_read_ber,
-	.read_signal_strength = af9005_fe_read_signal_strength,
-	.read_snr = af9005_fe_read_snr,
-	.read_ucblocks = af9005_fe_read_unc_blocks,
-};
diff --git a/drivers/media/dvb/dvb-usb/af9005-remote.c b/drivers/media/dvb/dvb-usb/af9005-remote.c
deleted file mode 100644
index 7e3961d..0000000
--- a/drivers/media/dvb/dvb-usb/af9005-remote.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/* DVB USB compliant Linux driver for the Afatech 9005
- * USB1.1 DVB-T receiver.
- *
- * Standard remote decode function
- *
- * Copyright (C) 2007 Luca Olivetti (luca@ventoso.org)
- *
- * Thanks to Afatech who kindly provided information.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "af9005.h"
-/* debug */
-static int dvb_usb_af9005_remote_debug;
-module_param_named(debug, dvb_usb_af9005_remote_debug, int, 0644);
-MODULE_PARM_DESC(debug,
-		 "enable (1) or disable (0) debug messages."
-		 DVB_USB_DEBUG_STATUS);
-
-#define deb_decode(args...)   dprintk(dvb_usb_af9005_remote_debug,0x01,args)
-
-struct rc_map_table rc_map_af9005_table[] = {
-
-	{0x01b7, KEY_POWER},
-	{0x01a7, KEY_VOLUMEUP},
-	{0x0187, KEY_CHANNELUP},
-	{0x017f, KEY_MUTE},
-	{0x01bf, KEY_VOLUMEDOWN},
-	{0x013f, KEY_CHANNELDOWN},
-	{0x01df, KEY_1},
-	{0x015f, KEY_2},
-	{0x019f, KEY_3},
-	{0x011f, KEY_4},
-	{0x01ef, KEY_5},
-	{0x016f, KEY_6},
-	{0x01af, KEY_7},
-	{0x0127, KEY_8},
-	{0x0107, KEY_9},
-	{0x01cf, KEY_ZOOM},
-	{0x014f, KEY_0},
-	{0x018f, KEY_GOTO},	/* marked jump on the remote */
-
-	{0x00bd, KEY_POWER},
-	{0x007d, KEY_VOLUMEUP},
-	{0x00fd, KEY_CHANNELUP},
-	{0x009d, KEY_MUTE},
-	{0x005d, KEY_VOLUMEDOWN},
-	{0x00dd, KEY_CHANNELDOWN},
-	{0x00ad, KEY_1},
-	{0x006d, KEY_2},
-	{0x00ed, KEY_3},
-	{0x008d, KEY_4},
-	{0x004d, KEY_5},
-	{0x00cd, KEY_6},
-	{0x00b5, KEY_7},
-	{0x0075, KEY_8},
-	{0x00f5, KEY_9},
-	{0x0095, KEY_ZOOM},
-	{0x0055, KEY_0},
-	{0x00d5, KEY_GOTO},	/* marked jump on the remote */
-};
-
-int rc_map_af9005_table_size = ARRAY_SIZE(rc_map_af9005_table);
-
-static int repeatable_keys[] = {
-	KEY_VOLUMEUP,
-	KEY_VOLUMEDOWN,
-	KEY_CHANNELUP,
-	KEY_CHANNELDOWN
-};
-
-int af9005_rc_decode(struct dvb_usb_device *d, u8 * data, int len, u32 * event,
-		     int *state)
-{
-	u16 mark, space;
-	u32 result;
-	u8 cust, dat, invdat;
-	int i;
-
-	if (len >= 6) {
-		mark = (u16) (data[0] << 8) + data[1];
-		space = (u16) (data[2] << 8) + data[3];
-		if (space * 3 < mark) {
-			for (i = 0; i < ARRAY_SIZE(repeatable_keys); i++) {
-				if (d->last_event == repeatable_keys[i]) {
-					*state = REMOTE_KEY_REPEAT;
-					*event = d->last_event;
-					deb_decode("repeat key, event %x\n",
-						   *event);
-					return 0;
-				}
-			}
-			deb_decode("repeated key ignored (non repeatable)\n");
-			return 0;
-		} else if (len >= 33 * 4) {	/*32 bits + start code */
-			result = 0;
-			for (i = 4; i < 4 + 32 * 4; i += 4) {
-				result <<= 1;
-				mark = (u16) (data[i] << 8) + data[i + 1];
-				mark >>= 1;
-				space = (u16) (data[i + 2] << 8) + data[i + 3];
-				space >>= 1;
-				if (mark * 2 > space)
-					result += 1;
-			}
-			deb_decode("key pressed, raw value %x\n", result);
-			if ((result & 0xff000000) != 0xfe000000) {
-				deb_decode
-				    ("doesn't start with 0xfe, ignored\n");
-				return 0;
-			}
-			cust = (result >> 16) & 0xff;
-			dat = (result >> 8) & 0xff;
-			invdat = (~result) & 0xff;
-			if (dat != invdat) {
-				deb_decode("code != inverted code\n");
-				return 0;
-			}
-			for (i = 0; i < rc_map_af9005_table_size; i++) {
-				if (rc5_custom(&rc_map_af9005_table[i]) == cust
-				    && rc5_data(&rc_map_af9005_table[i]) == dat) {
-					*event = rc_map_af9005_table[i].keycode;
-					*state = REMOTE_KEY_PRESSED;
-					deb_decode
-					    ("key pressed, event %x\n", *event);
-					return 0;
-				}
-			}
-			deb_decode("not found in table\n");
-		}
-	}
-	return 0;
-}
-
-EXPORT_SYMBOL(rc_map_af9005_table);
-EXPORT_SYMBOL(rc_map_af9005_table_size);
-EXPORT_SYMBOL(af9005_rc_decode);
-
-MODULE_AUTHOR("Luca Olivetti <luca@ventoso.org>");
-MODULE_DESCRIPTION
-    ("Standard remote control decoder for Afatech 9005 DVB-T USB1.1 stick");
-MODULE_VERSION("1.0");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/af9005-script.h b/drivers/media/dvb/dvb-usb/af9005-script.h
deleted file mode 100644
index 4d69045..0000000
--- a/drivers/media/dvb/dvb-usb/af9005-script.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
-File automatically generated by createinit.py using data
-extracted from AF05BDA.sys (windows driver):
-
-dd if=AF05BDA.sys of=initsequence bs=1 skip=88316 count=1110
-python createinit.py > af9005-script.h
-
-*/
-
-typedef struct {
-	u16 reg;
-	u8 pos;
-	u8 len;
-	u8 val;
-} RegDesc;
-
-static RegDesc script[] = {
-	{0xa180, 0x0, 0x8, 0xa},
-	{0xa181, 0x0, 0x8, 0xd7},
-	{0xa182, 0x0, 0x8, 0xa3},
-	{0xa0a0, 0x0, 0x8, 0x0},
-	{0xa0a1, 0x0, 0x5, 0x0},
-	{0xa0a1, 0x5, 0x1, 0x1},
-	{0xa0c0, 0x0, 0x4, 0x1},
-	{0xa20e, 0x4, 0x4, 0xa},
-	{0xa20f, 0x0, 0x8, 0x40},
-	{0xa210, 0x0, 0x8, 0x8},
-	{0xa32a, 0x0, 0x4, 0xa},
-	{0xa32c, 0x0, 0x8, 0x20},
-	{0xa32b, 0x0, 0x8, 0x15},
-	{0xa1a0, 0x1, 0x1, 0x1},
-	{0xa000, 0x0, 0x1, 0x1},
-	{0xa000, 0x1, 0x1, 0x0},
-	{0xa001, 0x1, 0x1, 0x1},
-	{0xa001, 0x0, 0x1, 0x0},
-	{0xa001, 0x5, 0x1, 0x0},
-	{0xa00e, 0x0, 0x5, 0x10},
-	{0xa00f, 0x0, 0x3, 0x4},
-	{0xa00f, 0x3, 0x3, 0x5},
-	{0xa010, 0x0, 0x3, 0x4},
-	{0xa010, 0x3, 0x3, 0x5},
-	{0xa016, 0x4, 0x4, 0x3},
-	{0xa01f, 0x0, 0x6, 0xa},
-	{0xa020, 0x0, 0x6, 0xa},
-	{0xa2bc, 0x0, 0x1, 0x1},
-	{0xa2bc, 0x5, 0x1, 0x1},
-	{0xa015, 0x0, 0x8, 0x50},
-	{0xa016, 0x0, 0x1, 0x0},
-	{0xa02a, 0x0, 0x8, 0x50},
-	{0xa029, 0x0, 0x8, 0x4b},
-	{0xa614, 0x0, 0x8, 0x46},
-	{0xa002, 0x0, 0x5, 0x19},
-	{0xa003, 0x0, 0x5, 0x1a},
-	{0xa004, 0x0, 0x5, 0x19},
-	{0xa005, 0x0, 0x5, 0x1a},
-	{0xa008, 0x0, 0x8, 0x69},
-	{0xa009, 0x0, 0x2, 0x2},
-	{0xae1b, 0x0, 0x8, 0x69},
-	{0xae1c, 0x0, 0x8, 0x2},
-	{0xae1d, 0x0, 0x8, 0x2a},
-	{0xa022, 0x0, 0x8, 0xaa},
-	{0xa006, 0x0, 0x8, 0xc8},
-	{0xa007, 0x0, 0x2, 0x0},
-	{0xa00c, 0x0, 0x8, 0xba},
-	{0xa00d, 0x0, 0x2, 0x2},
-	{0xa608, 0x0, 0x8, 0xba},
-	{0xa60e, 0x0, 0x2, 0x2},
-	{0xa609, 0x0, 0x8, 0x80},
-	{0xa60e, 0x2, 0x2, 0x3},
-	{0xa00a, 0x0, 0x8, 0xb6},
-	{0xa00b, 0x0, 0x2, 0x0},
-	{0xa011, 0x0, 0x8, 0xb9},
-	{0xa012, 0x0, 0x2, 0x0},
-	{0xa013, 0x0, 0x8, 0xbd},
-	{0xa014, 0x0, 0x2, 0x2},
-	{0xa366, 0x0, 0x1, 0x1},
-	{0xa2bc, 0x3, 0x1, 0x0},
-	{0xa2bd, 0x0, 0x8, 0xa},
-	{0xa2be, 0x0, 0x8, 0x14},
-	{0xa2bf, 0x0, 0x8, 0x8},
-	{0xa60a, 0x0, 0x8, 0xbd},
-	{0xa60e, 0x4, 0x2, 0x2},
-	{0xa60b, 0x0, 0x8, 0x86},
-	{0xa60e, 0x6, 0x2, 0x3},
-	{0xa001, 0x2, 0x2, 0x1},
-	{0xa1c7, 0x0, 0x8, 0xf5},
-	{0xa03d, 0x0, 0x8, 0xb1},
-	{0xa616, 0x0, 0x8, 0xff},
-	{0xa617, 0x0, 0x8, 0xad},
-	{0xa618, 0x0, 0x8, 0xad},
-	{0xa61e, 0x3, 0x1, 0x1},
-	{0xae1a, 0x0, 0x8, 0x0},
-	{0xae19, 0x0, 0x8, 0xc8},
-	{0xae18, 0x0, 0x8, 0x61},
-	{0xa140, 0x0, 0x8, 0x0},
-	{0xa141, 0x0, 0x8, 0xc8},
-	{0xa142, 0x0, 0x7, 0x61},
-	{0xa023, 0x0, 0x8, 0xff},
-	{0xa021, 0x0, 0x8, 0xad},
-	{0xa026, 0x0, 0x1, 0x0},
-	{0xa024, 0x0, 0x8, 0xff},
-	{0xa025, 0x0, 0x8, 0xff},
-	{0xa1c8, 0x0, 0x8, 0xf},
-	{0xa2bc, 0x1, 0x1, 0x0},
-	{0xa60c, 0x0, 0x4, 0x5},
-	{0xa60c, 0x4, 0x4, 0x6},
-	{0xa60d, 0x0, 0x8, 0xa},
-	{0xa371, 0x0, 0x1, 0x1},
-	{0xa366, 0x1, 0x3, 0x7},
-	{0xa338, 0x0, 0x8, 0x10},
-	{0xa339, 0x0, 0x6, 0x7},
-	{0xa33a, 0x0, 0x6, 0x1f},
-	{0xa33b, 0x0, 0x8, 0xf6},
-	{0xa33c, 0x3, 0x5, 0x4},
-	{0xa33d, 0x4, 0x4, 0x0},
-	{0xa33d, 0x1, 0x1, 0x1},
-	{0xa33d, 0x2, 0x1, 0x1},
-	{0xa33d, 0x3, 0x1, 0x1},
-	{0xa16d, 0x0, 0x4, 0xf},
-	{0xa161, 0x0, 0x5, 0x5},
-	{0xa162, 0x0, 0x4, 0x5},
-	{0xa165, 0x0, 0x8, 0xff},
-	{0xa166, 0x0, 0x8, 0x9c},
-	{0xa2c3, 0x0, 0x4, 0x5},
-	{0xa61a, 0x0, 0x6, 0xf},
-	{0xb200, 0x0, 0x8, 0xa1},
-	{0xb201, 0x0, 0x8, 0x7},
-	{0xa093, 0x0, 0x1, 0x0},
-	{0xa093, 0x1, 0x5, 0xf},
-	{0xa094, 0x0, 0x8, 0xff},
-	{0xa095, 0x0, 0x8, 0xf},
-	{0xa080, 0x2, 0x5, 0x3},
-	{0xa081, 0x0, 0x4, 0x0},
-	{0xa081, 0x4, 0x4, 0x9},
-	{0xa082, 0x0, 0x5, 0x1f},
-	{0xa08d, 0x0, 0x8, 0x1},
-	{0xa083, 0x0, 0x8, 0x32},
-	{0xa084, 0x0, 0x1, 0x0},
-	{0xa08e, 0x0, 0x8, 0x3},
-	{0xa085, 0x0, 0x8, 0x32},
-	{0xa086, 0x0, 0x3, 0x0},
-	{0xa087, 0x0, 0x8, 0x6e},
-	{0xa088, 0x0, 0x5, 0x15},
-	{0xa089, 0x0, 0x8, 0x0},
-	{0xa08a, 0x0, 0x5, 0x19},
-	{0xa08b, 0x0, 0x8, 0x92},
-	{0xa08c, 0x0, 0x5, 0x1c},
-	{0xa120, 0x0, 0x8, 0x0},
-	{0xa121, 0x0, 0x5, 0x10},
-	{0xa122, 0x0, 0x8, 0x0},
-	{0xa123, 0x0, 0x7, 0x40},
-	{0xa123, 0x7, 0x1, 0x0},
-	{0xa124, 0x0, 0x8, 0x13},
-	{0xa125, 0x0, 0x7, 0x10},
-	{0xa1c0, 0x0, 0x8, 0x0},
-	{0xa1c1, 0x0, 0x5, 0x4},
-	{0xa1c2, 0x0, 0x8, 0x0},
-	{0xa1c3, 0x0, 0x5, 0x10},
-	{0xa1c3, 0x5, 0x3, 0x0},
-	{0xa1c4, 0x0, 0x6, 0x0},
-	{0xa1c5, 0x0, 0x7, 0x10},
-	{0xa100, 0x0, 0x8, 0x0},
-	{0xa101, 0x0, 0x5, 0x10},
-	{0xa102, 0x0, 0x8, 0x0},
-	{0xa103, 0x0, 0x7, 0x40},
-	{0xa103, 0x7, 0x1, 0x0},
-	{0xa104, 0x0, 0x8, 0x18},
-	{0xa105, 0x0, 0x7, 0xa},
-	{0xa106, 0x0, 0x8, 0x20},
-	{0xa107, 0x0, 0x8, 0x40},
-	{0xa108, 0x0, 0x4, 0x0},
-	{0xa38c, 0x0, 0x8, 0xfc},
-	{0xa38d, 0x0, 0x8, 0x0},
-	{0xa38e, 0x0, 0x8, 0x7e},
-	{0xa38f, 0x0, 0x8, 0x0},
-	{0xa390, 0x0, 0x8, 0x2f},
-	{0xa60f, 0x5, 0x1, 0x1},
-	{0xa170, 0x0, 0x8, 0xdc},
-	{0xa171, 0x0, 0x2, 0x0},
-	{0xa2ae, 0x0, 0x1, 0x1},
-	{0xa2ae, 0x1, 0x1, 0x1},
-	{0xa392, 0x0, 0x1, 0x1},
-	{0xa391, 0x2, 0x1, 0x0},
-	{0xabc1, 0x0, 0x8, 0xff},
-	{0xabc2, 0x0, 0x8, 0x0},
-	{0xabc8, 0x0, 0x8, 0x8},
-	{0xabca, 0x0, 0x8, 0x10},
-	{0xabcb, 0x0, 0x1, 0x0},
-	{0xabc3, 0x5, 0x3, 0x7},
-	{0xabc0, 0x6, 0x1, 0x0},
-	{0xabc0, 0x4, 0x2, 0x0},
-	{0xa344, 0x4, 0x4, 0x1},
-	{0xabc0, 0x7, 0x1, 0x1},
-	{0xabc0, 0x2, 0x1, 0x1},
-	{0xa345, 0x0, 0x8, 0x66},
-	{0xa346, 0x0, 0x8, 0x66},
-	{0xa347, 0x0, 0x4, 0x0},
-	{0xa343, 0x0, 0x4, 0xa},
-	{0xa347, 0x4, 0x4, 0x2},
-	{0xa348, 0x0, 0x4, 0xc},
-	{0xa348, 0x4, 0x4, 0x7},
-	{0xa349, 0x0, 0x6, 0x2},
-};
diff --git a/drivers/media/dvb/dvb-usb/af9005.c b/drivers/media/dvb/dvb-usb/af9005.c
deleted file mode 100644
index af176b6..0000000
--- a/drivers/media/dvb/dvb-usb/af9005.c
+++ /dev/null
@@ -1,1117 +0,0 @@
-/* DVB USB compliant Linux driver for the Afatech 9005
- * USB1.1 DVB-T receiver.
- *
- * Copyright (C) 2007 Luca Olivetti (luca@ventoso.org)
- *
- * Thanks to Afatech who kindly provided information.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "af9005.h"
-
-/* debug */
-int dvb_usb_af9005_debug;
-module_param_named(debug, dvb_usb_af9005_debug, int, 0644);
-MODULE_PARM_DESC(debug,
-		 "set debugging level (1=info,xfer=2,rc=4,reg=8,i2c=16,fw=32 (or-able))."
-		 DVB_USB_DEBUG_STATUS);
-/* enable obnoxious led */
-bool dvb_usb_af9005_led = 1;
-module_param_named(led, dvb_usb_af9005_led, bool, 0644);
-MODULE_PARM_DESC(led, "enable led (default: 1).");
-
-/* eeprom dump */
-static int dvb_usb_af9005_dump_eeprom;
-module_param_named(dump_eeprom, dvb_usb_af9005_dump_eeprom, int, 0);
-MODULE_PARM_DESC(dump_eeprom, "dump contents of the eeprom.");
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-/* remote control decoder */
-static int (*rc_decode) (struct dvb_usb_device *d, u8 *data, int len,
-		u32 *event, int *state);
-static void *rc_keys;
-static int *rc_keys_size;
-
-u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff };
-
-struct af9005_device_state {
-	u8 sequence;
-	int led_state;
-};
-
-static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg,
-			      int readwrite, int type, u8 * values, int len)
-{
-	struct af9005_device_state *st = d->priv;
-	u8 obuf[16] = { 0 };
-	u8 ibuf[17] = { 0 };
-	u8 command;
-	int i;
-	int ret;
-
-	if (len < 1) {
-		err("generic read/write, less than 1 byte. Makes no sense.");
-		return -EINVAL;
-	}
-	if (len > 8) {
-		err("generic read/write, more than 8 bytes. Not supported.");
-		return -EINVAL;
-	}
-
-	obuf[0] = 14;		/* rest of buffer length low */
-	obuf[1] = 0;		/* rest of buffer length high */
-
-	obuf[2] = AF9005_REGISTER_RW;	/* register operation */
-	obuf[3] = 12;		/* rest of buffer length */
-
-	obuf[4] = st->sequence++;	/* sequence number */
-
-	obuf[5] = (u8) (reg >> 8);	/* register address */
-	obuf[6] = (u8) (reg & 0xff);
-
-	if (type == AF9005_OFDM_REG) {
-		command = AF9005_CMD_OFDM_REG;
-	} else {
-		command = AF9005_CMD_TUNER;
-	}
-
-	if (len > 1)
-		command |=
-		    AF9005_CMD_BURST | AF9005_CMD_AUTOINC | (len - 1) << 3;
-	command |= readwrite;
-	if (readwrite == AF9005_CMD_WRITE)
-		for (i = 0; i < len; i++)
-			obuf[8 + i] = values[i];
-	else if (type == AF9005_TUNER_REG)
-		/* read command for tuner, the first byte contains the i2c address */
-		obuf[8] = values[0];
-	obuf[7] = command;
-
-	ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 17, 0);
-	if (ret)
-		return ret;
-
-	/* sanity check */
-	if (ibuf[2] != AF9005_REGISTER_RW_ACK) {
-		err("generic read/write, wrong reply code.");
-		return -EIO;
-	}
-	if (ibuf[3] != 0x0d) {
-		err("generic read/write, wrong length in reply.");
-		return -EIO;
-	}
-	if (ibuf[4] != obuf[4]) {
-		err("generic read/write, wrong sequence in reply.");
-		return -EIO;
-	}
-	/*
-	   Windows driver doesn't check these fields, in fact sometimes
-	   the register in the reply is different that what has been sent
-
-	   if (ibuf[5] != obuf[5] || ibuf[6] != obuf[6]) {
-	   err("generic read/write, wrong register in reply.");
-	   return -EIO;
-	   }
-	   if (ibuf[7] != command) {
-	   err("generic read/write wrong command in reply.");
-	   return -EIO;
-	   }
-	 */
-	if (ibuf[16] != 0x01) {
-		err("generic read/write wrong status code in reply.");
-		return -EIO;
-	}
-	if (readwrite == AF9005_CMD_READ)
-		for (i = 0; i < len; i++)
-			values[i] = ibuf[8 + i];
-
-	return 0;
-
-}
-
-int af9005_read_ofdm_register(struct dvb_usb_device *d, u16 reg, u8 * value)
-{
-	int ret;
-	deb_reg("read register %x ", reg);
-	ret = af9005_generic_read_write(d, reg,
-					AF9005_CMD_READ, AF9005_OFDM_REG,
-					value, 1);
-	if (ret)
-		deb_reg("failed\n");
-	else
-		deb_reg("value %x\n", *value);
-	return ret;
-}
-
-int af9005_read_ofdm_registers(struct dvb_usb_device *d, u16 reg,
-			       u8 * values, int len)
-{
-	int ret;
-	deb_reg("read %d registers %x ", len, reg);
-	ret = af9005_generic_read_write(d, reg,
-					AF9005_CMD_READ, AF9005_OFDM_REG,
-					values, len);
-	if (ret)
-		deb_reg("failed\n");
-	else
-		debug_dump(values, len, deb_reg);
-	return ret;
-}
-
-int af9005_write_ofdm_register(struct dvb_usb_device *d, u16 reg, u8 value)
-{
-	int ret;
-	u8 temp = value;
-	deb_reg("write register %x value %x ", reg, value);
-	ret = af9005_generic_read_write(d, reg,
-					AF9005_CMD_WRITE, AF9005_OFDM_REG,
-					&temp, 1);
-	if (ret)
-		deb_reg("failed\n");
-	else
-		deb_reg("ok\n");
-	return ret;
-}
-
-int af9005_write_ofdm_registers(struct dvb_usb_device *d, u16 reg,
-				u8 * values, int len)
-{
-	int ret;
-	deb_reg("write %d registers %x values ", len, reg);
-	debug_dump(values, len, deb_reg);
-
-	ret = af9005_generic_read_write(d, reg,
-					AF9005_CMD_WRITE, AF9005_OFDM_REG,
-					values, len);
-	if (ret)
-		deb_reg("failed\n");
-	else
-		deb_reg("ok\n");
-	return ret;
-}
-
-int af9005_read_register_bits(struct dvb_usb_device *d, u16 reg, u8 pos,
-			      u8 len, u8 * value)
-{
-	u8 temp;
-	int ret;
-	deb_reg("read bits %x %x %x", reg, pos, len);
-	ret = af9005_read_ofdm_register(d, reg, &temp);
-	if (ret) {
-		deb_reg(" failed\n");
-		return ret;
-	}
-	*value = (temp >> pos) & regmask[len - 1];
-	deb_reg(" value %x\n", *value);
-	return 0;
-
-}
-
-int af9005_write_register_bits(struct dvb_usb_device *d, u16 reg, u8 pos,
-			       u8 len, u8 value)
-{
-	u8 temp, mask;
-	int ret;
-	deb_reg("write bits %x %x %x value %x\n", reg, pos, len, value);
-	if (pos == 0 && len == 8)
-		return af9005_write_ofdm_register(d, reg, value);
-	ret = af9005_read_ofdm_register(d, reg, &temp);
-	if (ret)
-		return ret;
-	mask = regmask[len - 1] << pos;
-	temp = (temp & ~mask) | ((value << pos) & mask);
-	return af9005_write_ofdm_register(d, reg, temp);
-
-}
-
-static int af9005_usb_read_tuner_registers(struct dvb_usb_device *d,
-					   u16 reg, u8 * values, int len)
-{
-	return af9005_generic_read_write(d, reg,
-					 AF9005_CMD_READ, AF9005_TUNER_REG,
-					 values, len);
-}
-
-static int af9005_usb_write_tuner_registers(struct dvb_usb_device *d,
-					    u16 reg, u8 * values, int len)
-{
-	return af9005_generic_read_write(d, reg,
-					 AF9005_CMD_WRITE,
-					 AF9005_TUNER_REG, values, len);
-}
-
-int af9005_write_tuner_registers(struct dvb_usb_device *d, u16 reg,
-				 u8 * values, int len)
-{
-	/* don't let the name of this function mislead you: it's just used
-	   as an interface from the firmware to the i2c bus. The actual
-	   i2c addresses are contained in the data */
-	int ret, i, done = 0, fail = 0;
-	u8 temp;
-	ret = af9005_usb_write_tuner_registers(d, reg, values, len);
-	if (ret)
-		return ret;
-	if (reg != 0xffff) {
-		/* check if write done (0xa40d bit 1) or fail (0xa40d bit 2) */
-		for (i = 0; i < 200; i++) {
-			ret =
-			    af9005_read_ofdm_register(d,
-						      xd_I2C_i2c_m_status_wdat_done,
-						      &temp);
-			if (ret)
-				return ret;
-			done = temp & (regmask[i2c_m_status_wdat_done_len - 1]
-				       << i2c_m_status_wdat_done_pos);
-			if (done)
-				break;
-			fail = temp & (regmask[i2c_m_status_wdat_fail_len - 1]
-				       << i2c_m_status_wdat_fail_pos);
-			if (fail)
-				break;
-			msleep(50);
-		}
-		if (i == 200)
-			return -ETIMEDOUT;
-		if (fail) {
-			/* clear write fail bit */
-			af9005_write_register_bits(d,
-						   xd_I2C_i2c_m_status_wdat_fail,
-						   i2c_m_status_wdat_fail_pos,
-						   i2c_m_status_wdat_fail_len,
-						   1);
-			return -EIO;
-		}
-		/* clear write done bit */
-		ret =
-		    af9005_write_register_bits(d,
-					       xd_I2C_i2c_m_status_wdat_fail,
-					       i2c_m_status_wdat_done_pos,
-					       i2c_m_status_wdat_done_len, 1);
-		if (ret)
-			return ret;
-	}
-	return 0;
-}
-
-int af9005_read_tuner_registers(struct dvb_usb_device *d, u16 reg, u8 addr,
-				u8 * values, int len)
-{
-	/* don't let the name of this function mislead you: it's just used
-	   as an interface from the firmware to the i2c bus. The actual
-	   i2c addresses are contained in the data */
-	int ret, i;
-	u8 temp, buf[2];
-
-	buf[0] = addr;		/* tuner i2c address */
-	buf[1] = values[0];	/* tuner register */
-
-	values[0] = addr + 0x01;	/* i2c read address */
-
-	if (reg == APO_REG_I2C_RW_SILICON_TUNER) {
-		/* write tuner i2c address to tuner, 0c00c0 undocumented, found by sniffing */
-		ret = af9005_write_tuner_registers(d, 0x00c0, buf, 2);
-		if (ret)
-			return ret;
-	}
-
-	/* send read command to ofsm */
-	ret = af9005_usb_read_tuner_registers(d, reg, values, 1);
-	if (ret)
-		return ret;
-
-	/* check if read done */
-	for (i = 0; i < 200; i++) {
-		ret = af9005_read_ofdm_register(d, 0xa408, &temp);
-		if (ret)
-			return ret;
-		if (temp & 0x01)
-			break;
-		msleep(50);
-	}
-	if (i == 200)
-		return -ETIMEDOUT;
-
-	/* clear read done bit (by writing 1) */
-	ret = af9005_write_ofdm_register(d, xd_I2C_i2c_m_data8, 1);
-	if (ret)
-		return ret;
-
-	/* get read data (available from 0xa400) */
-	for (i = 0; i < len; i++) {
-		ret = af9005_read_ofdm_register(d, 0xa400 + i, &temp);
-		if (ret)
-			return ret;
-		values[i] = temp;
-	}
-	return 0;
-}
-
-static int af9005_i2c_write(struct dvb_usb_device *d, u8 i2caddr, u8 reg,
-			    u8 * data, int len)
-{
-	int ret, i;
-	u8 buf[3];
-	deb_i2c("i2c_write i2caddr %x, reg %x, len %d data ", i2caddr,
-		reg, len);
-	debug_dump(data, len, deb_i2c);
-
-	for (i = 0; i < len; i++) {
-		buf[0] = i2caddr;
-		buf[1] = reg + (u8) i;
-		buf[2] = data[i];
-		ret =
-		    af9005_write_tuner_registers(d,
-						 APO_REG_I2C_RW_SILICON_TUNER,
-						 buf, 3);
-		if (ret) {
-			deb_i2c("i2c_write failed\n");
-			return ret;
-		}
-	}
-	deb_i2c("i2c_write ok\n");
-	return 0;
-}
-
-static int af9005_i2c_read(struct dvb_usb_device *d, u8 i2caddr, u8 reg,
-			   u8 * data, int len)
-{
-	int ret, i;
-	u8 temp;
-	deb_i2c("i2c_read i2caddr %x, reg %x, len %d\n ", i2caddr, reg, len);
-	for (i = 0; i < len; i++) {
-		temp = reg + i;
-		ret =
-		    af9005_read_tuner_registers(d,
-						APO_REG_I2C_RW_SILICON_TUNER,
-						i2caddr, &temp, 1);
-		if (ret) {
-			deb_i2c("i2c_read failed\n");
-			return ret;
-		}
-		data[i] = temp;
-	}
-	deb_i2c("i2c data read: ");
-	debug_dump(data, len, deb_i2c);
-	return 0;
-}
-
-static int af9005_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
-			   int num)
-{
-	/* only implements what the mt2060 module does, don't know how
-	   to make it really generic */
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	int ret;
-	u8 reg, addr;
-	u8 *value;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	if (num > 2)
-		warn("more than 2 i2c messages at a time is not handled yet. TODO.");
-
-	if (num == 2) {
-		/* reads a single register */
-		reg = *msg[0].buf;
-		addr = msg[0].addr;
-		value = msg[1].buf;
-		ret = af9005_i2c_read(d, addr, reg, value, 1);
-		if (ret == 0)
-			ret = 2;
-	} else {
-		/* write one or more registers */
-		reg = msg[0].buf[0];
-		addr = msg[0].addr;
-		value = &msg[0].buf[1];
-		ret = af9005_i2c_write(d, addr, reg, value, msg[0].len - 1);
-		if (ret == 0)
-			ret = 1;
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-	return ret;
-}
-
-static u32 af9005_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm af9005_i2c_algo = {
-	.master_xfer = af9005_i2c_xfer,
-	.functionality = af9005_i2c_func,
-};
-
-int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf,
-			int wlen, u8 * rbuf, int rlen)
-{
-	struct af9005_device_state *st = d->priv;
-
-	int ret, i, packet_len;
-	u8 buf[64];
-	u8 ibuf[64];
-
-	if (wlen < 0) {
-		err("send command, wlen less than 0 bytes. Makes no sense.");
-		return -EINVAL;
-	}
-	if (wlen > 54) {
-		err("send command, wlen more than 54 bytes. Not supported.");
-		return -EINVAL;
-	}
-	if (rlen > 54) {
-		err("send command, rlen more than 54 bytes. Not supported.");
-		return -EINVAL;
-	}
-	packet_len = wlen + 5;
-	buf[0] = (u8) (packet_len & 0xff);
-	buf[1] = (u8) ((packet_len & 0xff00) >> 8);
-
-	buf[2] = 0x26;		/* packet type */
-	buf[3] = wlen + 3;
-	buf[4] = st->sequence++;
-	buf[5] = command;
-	buf[6] = wlen;
-	for (i = 0; i < wlen; i++)
-		buf[7 + i] = wbuf[i];
-	ret = dvb_usb_generic_rw(d, buf, wlen + 7, ibuf, rlen + 7, 0);
-	if (ret)
-		return ret;
-	if (ibuf[2] != 0x27) {
-		err("send command, wrong reply code.");
-		return -EIO;
-	}
-	if (ibuf[4] != buf[4]) {
-		err("send command, wrong sequence in reply.");
-		return -EIO;
-	}
-	if (ibuf[5] != 0x01) {
-		err("send command, wrong status code in reply.");
-		return -EIO;
-	}
-	if (ibuf[6] != rlen) {
-		err("send command, invalid data length in reply.");
-		return -EIO;
-	}
-	for (i = 0; i < rlen; i++)
-		rbuf[i] = ibuf[i + 7];
-	return 0;
-}
-
-int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values,
-		       int len)
-{
-	struct af9005_device_state *st = d->priv;
-	u8 obuf[16], ibuf[14];
-	int ret, i;
-
-	memset(obuf, 0, sizeof(obuf));
-	memset(ibuf, 0, sizeof(ibuf));
-
-	obuf[0] = 14;		/* length of rest of packet low */
-	obuf[1] = 0;		/* length of rest of packer high */
-
-	obuf[2] = 0x2a;		/* read/write eeprom */
-
-	obuf[3] = 12;		/* size */
-
-	obuf[4] = st->sequence++;
-
-	obuf[5] = 0;		/* read */
-
-	obuf[6] = len;
-	obuf[7] = address;
-	ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 14, 0);
-	if (ret)
-		return ret;
-	if (ibuf[2] != 0x2b) {
-		err("Read eeprom, invalid reply code");
-		return -EIO;
-	}
-	if (ibuf[3] != 10) {
-		err("Read eeprom, invalid reply length");
-		return -EIO;
-	}
-	if (ibuf[4] != obuf[4]) {
-		err("Read eeprom, wrong sequence in reply ");
-		return -EIO;
-	}
-	if (ibuf[5] != 1) {
-		err("Read eeprom, wrong status in reply ");
-		return -EIO;
-	}
-	for (i = 0; i < len; i++) {
-		values[i] = ibuf[6 + i];
-	}
-	return 0;
-}
-
-static int af9005_boot_packet(struct usb_device *udev, int type, u8 * reply)
-{
-	u8 buf[FW_BULKOUT_SIZE + 2];
-	u16 checksum;
-	int act_len, i, ret;
-	memset(buf, 0, sizeof(buf));
-	buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff);
-	buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff);
-	switch (type) {
-	case FW_CONFIG:
-		buf[2] = 0x11;
-		buf[3] = 0x04;
-		buf[4] = 0x00;	/* sequence number, original driver doesn't increment it here */
-		buf[5] = 0x03;
-		checksum = buf[4] + buf[5];
-		buf[6] = (u8) ((checksum >> 8) & 0xff);
-		buf[7] = (u8) (checksum & 0xff);
-		break;
-	case FW_CONFIRM:
-		buf[2] = 0x11;
-		buf[3] = 0x04;
-		buf[4] = 0x00;	/* sequence number, original driver doesn't increment it here */
-		buf[5] = 0x01;
-		checksum = buf[4] + buf[5];
-		buf[6] = (u8) ((checksum >> 8) & 0xff);
-		buf[7] = (u8) (checksum & 0xff);
-		break;
-	case FW_BOOT:
-		buf[2] = 0x10;
-		buf[3] = 0x08;
-		buf[4] = 0x00;	/* sequence number, original driver doesn't increment it here */
-		buf[5] = 0x97;
-		buf[6] = 0xaa;
-		buf[7] = 0x55;
-		buf[8] = 0xa5;
-		buf[9] = 0x5a;
-		checksum = 0;
-		for (i = 4; i <= 9; i++)
-			checksum += buf[i];
-		buf[10] = (u8) ((checksum >> 8) & 0xff);
-		buf[11] = (u8) (checksum & 0xff);
-		break;
-	default:
-		err("boot packet invalid boot packet type");
-		return -EINVAL;
-	}
-	deb_fw(">>> ");
-	debug_dump(buf, FW_BULKOUT_SIZE + 2, deb_fw);
-
-	ret = usb_bulk_msg(udev,
-			   usb_sndbulkpipe(udev, 0x02),
-			   buf, FW_BULKOUT_SIZE + 2, &act_len, 2000);
-	if (ret)
-		err("boot packet bulk message failed: %d (%d/%d)", ret,
-		    FW_BULKOUT_SIZE + 2, act_len);
-	else
-		ret = act_len != FW_BULKOUT_SIZE + 2 ? -1 : 0;
-	if (ret)
-		return ret;
-	memset(buf, 0, 9);
-	ret = usb_bulk_msg(udev,
-			   usb_rcvbulkpipe(udev, 0x01), buf, 9, &act_len, 2000);
-	if (ret) {
-		err("boot packet recv bulk message failed: %d", ret);
-		return ret;
-	}
-	deb_fw("<<< ");
-	debug_dump(buf, act_len, deb_fw);
-	checksum = 0;
-	switch (type) {
-	case FW_CONFIG:
-		if (buf[2] != 0x11) {
-			err("boot bad config header.");
-			return -EIO;
-		}
-		if (buf[3] != 0x05) {
-			err("boot bad config size.");
-			return -EIO;
-		}
-		if (buf[4] != 0x00) {
-			err("boot bad config sequence.");
-			return -EIO;
-		}
-		if (buf[5] != 0x04) {
-			err("boot bad config subtype.");
-			return -EIO;
-		}
-		for (i = 4; i <= 6; i++)
-			checksum += buf[i];
-		if (buf[7] * 256 + buf[8] != checksum) {
-			err("boot bad config checksum.");
-			return -EIO;
-		}
-		*reply = buf[6];
-		break;
-	case FW_CONFIRM:
-		if (buf[2] != 0x11) {
-			err("boot bad confirm header.");
-			return -EIO;
-		}
-		if (buf[3] != 0x05) {
-			err("boot bad confirm size.");
-			return -EIO;
-		}
-		if (buf[4] != 0x00) {
-			err("boot bad confirm sequence.");
-			return -EIO;
-		}
-		if (buf[5] != 0x02) {
-			err("boot bad confirm subtype.");
-			return -EIO;
-		}
-		for (i = 4; i <= 6; i++)
-			checksum += buf[i];
-		if (buf[7] * 256 + buf[8] != checksum) {
-			err("boot bad confirm checksum.");
-			return -EIO;
-		}
-		*reply = buf[6];
-		break;
-	case FW_BOOT:
-		if (buf[2] != 0x10) {
-			err("boot bad boot header.");
-			return -EIO;
-		}
-		if (buf[3] != 0x05) {
-			err("boot bad boot size.");
-			return -EIO;
-		}
-		if (buf[4] != 0x00) {
-			err("boot bad boot sequence.");
-			return -EIO;
-		}
-		if (buf[5] != 0x01) {
-			err("boot bad boot pattern 01.");
-			return -EIO;
-		}
-		if (buf[6] != 0x10) {
-			err("boot bad boot pattern 10.");
-			return -EIO;
-		}
-		for (i = 4; i <= 6; i++)
-			checksum += buf[i];
-		if (buf[7] * 256 + buf[8] != checksum) {
-			err("boot bad boot checksum.");
-			return -EIO;
-		}
-		break;
-
-	}
-
-	return 0;
-}
-
-static int af9005_download_firmware(struct usb_device *udev, const struct firmware *fw)
-{
-	int i, packets, ret, act_len;
-
-	u8 buf[FW_BULKOUT_SIZE + 2];
-	u8 reply;
-
-	ret = af9005_boot_packet(udev, FW_CONFIG, &reply);
-	if (ret)
-		return ret;
-	if (reply != 0x01) {
-		err("before downloading firmware, FW_CONFIG expected 0x01, received 0x%x", reply);
-		return -EIO;
-	}
-	packets = fw->size / FW_BULKOUT_SIZE;
-	buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff);
-	buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff);
-	for (i = 0; i < packets; i++) {
-		memcpy(&buf[2], fw->data + i * FW_BULKOUT_SIZE,
-		       FW_BULKOUT_SIZE);
-		deb_fw(">>> ");
-		debug_dump(buf, FW_BULKOUT_SIZE + 2, deb_fw);
-		ret = usb_bulk_msg(udev,
-				   usb_sndbulkpipe(udev, 0x02),
-				   buf, FW_BULKOUT_SIZE + 2, &act_len, 1000);
-		if (ret) {
-			err("firmware download failed at packet %d with code %d", i, ret);
-			return ret;
-		}
-	}
-	ret = af9005_boot_packet(udev, FW_CONFIRM, &reply);
-	if (ret)
-		return ret;
-	if (reply != (u8) (packets & 0xff)) {
-		err("after downloading firmware, FW_CONFIRM expected 0x%x, received 0x%x", packets & 0xff, reply);
-		return -EIO;
-	}
-	ret = af9005_boot_packet(udev, FW_BOOT, &reply);
-	if (ret)
-		return ret;
-	ret = af9005_boot_packet(udev, FW_CONFIG, &reply);
-	if (ret)
-		return ret;
-	if (reply != 0x02) {
-		err("after downloading firmware, FW_CONFIG expected 0x02, received 0x%x", reply);
-		return -EIO;
-	}
-
-	return 0;
-
-}
-
-int af9005_led_control(struct dvb_usb_device *d, int onoff)
-{
-	struct af9005_device_state *st = d->priv;
-	int temp, ret;
-
-	if (onoff && dvb_usb_af9005_led)
-		temp = 1;
-	else
-		temp = 0;
-	if (st->led_state != temp) {
-		ret =
-		    af9005_write_register_bits(d, xd_p_reg_top_locken1,
-					       reg_top_locken1_pos,
-					       reg_top_locken1_len, temp);
-		if (ret)
-			return ret;
-		ret =
-		    af9005_write_register_bits(d, xd_p_reg_top_lock1,
-					       reg_top_lock1_pos,
-					       reg_top_lock1_len, temp);
-		if (ret)
-			return ret;
-		st->led_state = temp;
-	}
-	return 0;
-}
-
-static int af9005_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	u8 buf[8];
-	int i;
-
-	/* without these calls the first commands after downloading
-	   the firmware fail. I put these calls here to simulate
-	   what it is done in dvb-usb-init.c.
-	 */
-	struct usb_device *udev = adap->dev->udev;
-	usb_clear_halt(udev, usb_sndbulkpipe(udev, 2));
-	usb_clear_halt(udev, usb_rcvbulkpipe(udev, 1));
-	if (dvb_usb_af9005_dump_eeprom) {
-		printk("EEPROM DUMP\n");
-		for (i = 0; i < 255; i += 8) {
-			af9005_read_eeprom(adap->dev, i, buf, 8);
-			printk("ADDR %x ", i);
-			debug_dump(buf, 8, printk);
-		}
-	}
-	adap->fe_adap[0].fe = af9005_fe_attach(adap->dev);
-	return 0;
-}
-
-static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state)
-{
-	struct af9005_device_state *st = d->priv;
-	int ret, len;
-
-	u8 obuf[5];
-	u8 ibuf[256];
-
-	*state = REMOTE_NO_KEY_PRESSED;
-	if (rc_decode == NULL) {
-		/* it shouldn't never come here */
-		return 0;
-	}
-	/* deb_info("rc_query\n"); */
-	obuf[0] = 3;		/* rest of packet length low */
-	obuf[1] = 0;		/* rest of packet lentgh high */
-	obuf[2] = 0x40;		/* read remote */
-	obuf[3] = 1;		/* rest of packet length */
-	obuf[4] = st->sequence++;	/* sequence number */
-	ret = dvb_usb_generic_rw(d, obuf, 5, ibuf, 256, 0);
-	if (ret) {
-		err("rc query failed");
-		return ret;
-	}
-	if (ibuf[2] != 0x41) {
-		err("rc query bad header.");
-		return -EIO;
-	}
-	if (ibuf[4] != obuf[4]) {
-		err("rc query bad sequence.");
-		return -EIO;
-	}
-	len = ibuf[5];
-	if (len > 246) {
-		err("rc query invalid length");
-		return -EIO;
-	}
-	if (len > 0) {
-		deb_rc("rc data (%d) ", len);
-		debug_dump((ibuf + 6), len, deb_rc);
-		ret = rc_decode(d, &ibuf[6], len, event, state);
-		if (ret) {
-			err("rc_decode failed");
-			return ret;
-		} else {
-			deb_rc("rc_decode state %x event %x\n", *state, *event);
-			if (*state == REMOTE_KEY_REPEAT)
-				*event = d->last_event;
-		}
-	}
-	return 0;
-}
-
-static int af9005_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-
-	return 0;
-}
-
-static int af9005_pid_filter_control(struct dvb_usb_adapter *adap, int onoff)
-{
-	int ret;
-	deb_info("pid filter control  onoff %d\n", onoff);
-	if (onoff) {
-		ret =
-		    af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 1);
-		if (ret)
-			return ret;
-		ret =
-		    af9005_write_register_bits(adap->dev,
-					       XD_MP2IF_DMX_CTRL, 1, 1, 1);
-		if (ret)
-			return ret;
-		ret =
-		    af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 1);
-	} else
-		ret =
-		    af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 0);
-	if (ret)
-		return ret;
-	deb_info("pid filter control ok\n");
-	return 0;
-}
-
-static int af9005_pid_filter(struct dvb_usb_adapter *adap, int index,
-			     u16 pid, int onoff)
-{
-	u8 cmd = index & 0x1f;
-	int ret;
-	deb_info("set pid filter, index %d, pid %x, onoff %d\n", index,
-		 pid, onoff);
-	if (onoff) {
-		/* cannot use it as pid_filter_ctrl since it has to be done
-		   before setting the first pid */
-		if (adap->feedcount == 1) {
-			deb_info("first pid set, enable pid table\n");
-			ret = af9005_pid_filter_control(adap, onoff);
-			if (ret)
-				return ret;
-		}
-		ret =
-		    af9005_write_ofdm_register(adap->dev,
-					       XD_MP2IF_PID_DATA_L,
-					       (u8) (pid & 0xff));
-		if (ret)
-			return ret;
-		ret =
-		    af9005_write_ofdm_register(adap->dev,
-					       XD_MP2IF_PID_DATA_H,
-					       (u8) (pid >> 8));
-		if (ret)
-			return ret;
-		cmd |= 0x20 | 0x40;
-	} else {
-		if (adap->feedcount == 0) {
-			deb_info("last pid unset, disable pid table\n");
-			ret = af9005_pid_filter_control(adap, onoff);
-			if (ret)
-				return ret;
-		}
-	}
-	ret = af9005_write_ofdm_register(adap->dev, XD_MP2IF_PID_IDX, cmd);
-	if (ret)
-		return ret;
-	deb_info("set pid ok\n");
-	return 0;
-}
-
-static int af9005_identify_state(struct usb_device *udev,
-				 struct dvb_usb_device_properties *props,
-				 struct dvb_usb_device_description **desc,
-				 int *cold)
-{
-	int ret;
-	u8 reply;
-	ret = af9005_boot_packet(udev, FW_CONFIG, &reply);
-	if (ret)
-		return ret;
-	deb_info("result of FW_CONFIG in identify state %d\n", reply);
-	if (reply == 0x01)
-		*cold = 1;
-	else if (reply == 0x02)
-		*cold = 0;
-	else
-		return -EIO;
-	deb_info("Identify state cold = %d\n", *cold);
-	return 0;
-}
-
-static struct dvb_usb_device_properties af9005_properties;
-
-static int af9005_usb_probe(struct usb_interface *intf,
-			    const struct usb_device_id *id)
-{
-	return dvb_usb_device_init(intf, &af9005_properties,
-				   THIS_MODULE, NULL, adapter_nr);
-}
-
-enum af9005_usb_table_entry {
-	AFATECH_AF9005,
-	TERRATEC_AF9005,
-	ANSONIC_AF9005,
-};
-
-static struct usb_device_id af9005_usb_table[] = {
-	[AFATECH_AF9005] = {USB_DEVICE(USB_VID_AFATECH,
-				USB_PID_AFATECH_AF9005)},
-	[TERRATEC_AF9005] = {USB_DEVICE(USB_VID_TERRATEC,
-				USB_PID_TERRATEC_CINERGY_T_USB_XE)},
-	[ANSONIC_AF9005] = {USB_DEVICE(USB_VID_ANSONIC,
-				USB_PID_ANSONIC_DVBT_USB)},
-	{ }
-};
-
-MODULE_DEVICE_TABLE(usb, af9005_usb_table);
-
-static struct dvb_usb_device_properties af9005_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = DEVICE_SPECIFIC,
-	.firmware = "af9005.fw",
-	.download_firmware = af9005_download_firmware,
-	.no_reconnect = 1,
-
-	.size_of_priv = sizeof(struct af9005_device_state),
-
-	.num_adapters = 1,
-	.adapter = {
-		    {
-		    .num_frontends = 1,
-		    .fe = {{
-		     .caps =
-		     DVB_USB_ADAP_HAS_PID_FILTER |
-		     DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-		     .pid_filter_count = 32,
-		     .pid_filter = af9005_pid_filter,
-		     /* .pid_filter_ctrl = af9005_pid_filter_control, */
-		     .frontend_attach = af9005_frontend_attach,
-		     /* .tuner_attach     = af9005_tuner_attach, */
-		     /* parameter for the MPEG2-data transfer */
-		     .stream = {
-				.type = USB_BULK,
-				.count = 10,
-				.endpoint = 0x04,
-				.u = {
-				      .bulk = {
-					       .buffersize = 4096,	/* actual size seen is 3948 */
-					       }
-				      }
-				},
-		     }},
-		     }
-		    },
-	.power_ctrl = af9005_power_ctrl,
-	.identify_state = af9005_identify_state,
-
-	.i2c_algo = &af9005_i2c_algo,
-
-	.rc.legacy = {
-		.rc_interval = 200,
-		.rc_map_table = NULL,
-		.rc_map_size = 0,
-		.rc_query = af9005_rc_query,
-	},
-
-	.generic_bulk_ctrl_endpoint          = 2,
-	.generic_bulk_ctrl_endpoint_response = 1,
-
-	.num_device_descs = 3,
-	.devices = {
-		    {.name = "Afatech DVB-T USB1.1 stick",
-		     .cold_ids = {&af9005_usb_table[AFATECH_AF9005], NULL},
-		     .warm_ids = {NULL},
-		     },
-		    {.name = "TerraTec Cinergy T USB XE",
-		     .cold_ids = {&af9005_usb_table[TERRATEC_AF9005], NULL},
-		     .warm_ids = {NULL},
-		     },
-		    {.name = "Ansonic DVB-T USB1.1 stick",
-		     .cold_ids = {&af9005_usb_table[ANSONIC_AF9005], NULL},
-		     .warm_ids = {NULL},
-		     },
-		    {NULL},
-		    }
-};
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver af9005_usb_driver = {
-	.name = "dvb_usb_af9005",
-	.probe = af9005_usb_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table = af9005_usb_table,
-};
-
-/* module stuff */
-static int __init af9005_usb_module_init(void)
-{
-	int result;
-	if ((result = usb_register(&af9005_usb_driver))) {
-		err("usb_register failed. (%d)", result);
-		return result;
-	}
-	rc_decode = symbol_request(af9005_rc_decode);
-	rc_keys = symbol_request(rc_map_af9005_table);
-	rc_keys_size = symbol_request(rc_map_af9005_table_size);
-	if (rc_decode == NULL || rc_keys == NULL || rc_keys_size == NULL) {
-		err("af9005_rc_decode function not found, disabling remote");
-		af9005_properties.rc.legacy.rc_query = NULL;
-	} else {
-		af9005_properties.rc.legacy.rc_map_table = rc_keys;
-		af9005_properties.rc.legacy.rc_map_size = *rc_keys_size;
-	}
-
-	return 0;
-}
-
-static void __exit af9005_usb_module_exit(void)
-{
-	/* release rc decode symbols */
-	if (rc_decode != NULL)
-		symbol_put(af9005_rc_decode);
-	if (rc_keys != NULL)
-		symbol_put(rc_map_af9005_table);
-	if (rc_keys_size != NULL)
-		symbol_put(rc_map_af9005_table_size);
-	/* deregister this driver from the USB subsystem */
-	usb_deregister(&af9005_usb_driver);
-}
-
-module_init(af9005_usb_module_init);
-module_exit(af9005_usb_module_exit);
-
-MODULE_AUTHOR("Luca Olivetti <luca@ventoso.org>");
-MODULE_DESCRIPTION("Driver for Afatech 9005 DVB-T USB1.1 stick");
-MODULE_VERSION("1.0");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/af9005.h b/drivers/media/dvb/dvb-usb/af9005.h
deleted file mode 100644
index 6a2bf3d..0000000
--- a/drivers/media/dvb/dvb-usb/af9005.h
+++ /dev/null
@@ -1,3496 +0,0 @@
-/* Common header-file of the Linux driver for the Afatech 9005
- * USB1.1 DVB-T receiver.
- *
- * Copyright (C) 2007 Luca Olivetti (luca@ventoso.org)
- *
- * Thanks to Afatech who kindly provided information.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#ifndef _DVB_USB_AF9005_H_
-#define _DVB_USB_AF9005_H_
-
-#define DVB_USB_LOG_PREFIX "af9005"
-#include "dvb-usb.h"
-
-extern int dvb_usb_af9005_debug;
-#define deb_info(args...) dprintk(dvb_usb_af9005_debug,0x01,args)
-#define deb_xfer(args...) dprintk(dvb_usb_af9005_debug,0x02,args)
-#define deb_rc(args...)   dprintk(dvb_usb_af9005_debug,0x04,args)
-#define deb_reg(args...)  dprintk(dvb_usb_af9005_debug,0x08,args)
-#define deb_i2c(args...)  dprintk(dvb_usb_af9005_debug,0x10,args)
-#define deb_fw(args...)   dprintk(dvb_usb_af9005_debug,0x20,args)
-
-extern bool dvb_usb_af9005_led;
-
-/* firmware */
-#define FW_BULKOUT_SIZE 250
-enum {
-	FW_CONFIG,
-	FW_CONFIRM,
-	FW_BOOT
-};
-
-/* af9005 commands */
-#define AF9005_OFDM_REG  0
-#define AF9005_TUNER_REG 1
-
-#define AF9005_REGISTER_RW     0x20
-#define AF9005_REGISTER_RW_ACK 0x21
-
-#define AF9005_CMD_OFDM_REG 0x00
-#define AF9005_CMD_TUNER    0x80
-#define AF9005_CMD_BURST    0x02
-#define AF9005_CMD_AUTOINC  0x04
-#define AF9005_CMD_READ     0x00
-#define AF9005_CMD_WRITE    0x01
-
-/* af9005 registers */
-#define APO_REG_RESET					0xAEFF
-
-#define APO_REG_I2C_RW_CAN_TUNER            0xF000
-#define APO_REG_I2C_RW_SILICON_TUNER        0xF001
-#define APO_REG_GPIO_RW_SILICON_TUNER       0xFFFE	/*  also for OFSM */
-#define APO_REG_TRIGGER_OFSM                0xFFFF	/*  also for OFSM */
-
-/***********************************************************************
- *  Apollo Registers from VLSI					       *
- ***********************************************************************/
-#define xd_p_reg_aagc_inverted_agc	0xA000
-#define	reg_aagc_inverted_agc_pos 0
-#define	reg_aagc_inverted_agc_len 1
-#define	reg_aagc_inverted_agc_lsb 0
-#define xd_p_reg_aagc_sign_only	0xA000
-#define	reg_aagc_sign_only_pos 1
-#define	reg_aagc_sign_only_len 1
-#define	reg_aagc_sign_only_lsb 0
-#define xd_p_reg_aagc_slow_adc_en	0xA000
-#define	reg_aagc_slow_adc_en_pos 2
-#define	reg_aagc_slow_adc_en_len 1
-#define	reg_aagc_slow_adc_en_lsb 0
-#define xd_p_reg_aagc_slow_adc_scale	0xA000
-#define	reg_aagc_slow_adc_scale_pos 3
-#define	reg_aagc_slow_adc_scale_len 5
-#define	reg_aagc_slow_adc_scale_lsb 0
-#define xd_p_reg_aagc_check_slow_adc_lock	0xA001
-#define	reg_aagc_check_slow_adc_lock_pos 0
-#define	reg_aagc_check_slow_adc_lock_len 1
-#define	reg_aagc_check_slow_adc_lock_lsb 0
-#define xd_p_reg_aagc_init_control	0xA001
-#define	reg_aagc_init_control_pos 1
-#define	reg_aagc_init_control_len 1
-#define	reg_aagc_init_control_lsb 0
-#define xd_p_reg_aagc_total_gain_sel	0xA001
-#define	reg_aagc_total_gain_sel_pos 2
-#define	reg_aagc_total_gain_sel_len 2
-#define	reg_aagc_total_gain_sel_lsb 0
-#define xd_p_reg_aagc_out_inv	0xA001
-#define	reg_aagc_out_inv_pos 5
-#define	reg_aagc_out_inv_len 1
-#define	reg_aagc_out_inv_lsb 0
-#define xd_p_reg_aagc_int_en	0xA001
-#define	reg_aagc_int_en_pos 6
-#define	reg_aagc_int_en_len 1
-#define	reg_aagc_int_en_lsb 0
-#define xd_p_reg_aagc_lock_change_flag	0xA001
-#define	reg_aagc_lock_change_flag_pos 7
-#define	reg_aagc_lock_change_flag_len 1
-#define	reg_aagc_lock_change_flag_lsb 0
-#define xd_p_reg_aagc_rf_loop_bw_scale_acquire	0xA002
-#define	reg_aagc_rf_loop_bw_scale_acquire_pos 0
-#define	reg_aagc_rf_loop_bw_scale_acquire_len 5
-#define	reg_aagc_rf_loop_bw_scale_acquire_lsb 0
-#define xd_p_reg_aagc_rf_loop_bw_scale_track	0xA003
-#define	reg_aagc_rf_loop_bw_scale_track_pos 0
-#define	reg_aagc_rf_loop_bw_scale_track_len 5
-#define	reg_aagc_rf_loop_bw_scale_track_lsb 0
-#define xd_p_reg_aagc_if_loop_bw_scale_acquire	0xA004
-#define	reg_aagc_if_loop_bw_scale_acquire_pos 0
-#define	reg_aagc_if_loop_bw_scale_acquire_len 5
-#define	reg_aagc_if_loop_bw_scale_acquire_lsb 0
-#define xd_p_reg_aagc_if_loop_bw_scale_track	0xA005
-#define	reg_aagc_if_loop_bw_scale_track_pos 0
-#define	reg_aagc_if_loop_bw_scale_track_len 5
-#define	reg_aagc_if_loop_bw_scale_track_lsb 0
-#define xd_p_reg_aagc_max_rf_agc_7_0	0xA006
-#define	reg_aagc_max_rf_agc_7_0_pos 0
-#define	reg_aagc_max_rf_agc_7_0_len 8
-#define	reg_aagc_max_rf_agc_7_0_lsb 0
-#define xd_p_reg_aagc_max_rf_agc_9_8	0xA007
-#define	reg_aagc_max_rf_agc_9_8_pos 0
-#define	reg_aagc_max_rf_agc_9_8_len 2
-#define	reg_aagc_max_rf_agc_9_8_lsb 8
-#define xd_p_reg_aagc_min_rf_agc_7_0	0xA008
-#define	reg_aagc_min_rf_agc_7_0_pos 0
-#define	reg_aagc_min_rf_agc_7_0_len 8
-#define	reg_aagc_min_rf_agc_7_0_lsb 0
-#define xd_p_reg_aagc_min_rf_agc_9_8	0xA009
-#define	reg_aagc_min_rf_agc_9_8_pos 0
-#define	reg_aagc_min_rf_agc_9_8_len 2
-#define	reg_aagc_min_rf_agc_9_8_lsb 8
-#define xd_p_reg_aagc_max_if_agc_7_0	0xA00A
-#define	reg_aagc_max_if_agc_7_0_pos 0
-#define	reg_aagc_max_if_agc_7_0_len 8
-#define	reg_aagc_max_if_agc_7_0_lsb 0
-#define xd_p_reg_aagc_max_if_agc_9_8	0xA00B
-#define	reg_aagc_max_if_agc_9_8_pos 0
-#define	reg_aagc_max_if_agc_9_8_len 2
-#define	reg_aagc_max_if_agc_9_8_lsb 8
-#define xd_p_reg_aagc_min_if_agc_7_0	0xA00C
-#define	reg_aagc_min_if_agc_7_0_pos 0
-#define	reg_aagc_min_if_agc_7_0_len 8
-#define	reg_aagc_min_if_agc_7_0_lsb 0
-#define xd_p_reg_aagc_min_if_agc_9_8	0xA00D
-#define	reg_aagc_min_if_agc_9_8_pos 0
-#define	reg_aagc_min_if_agc_9_8_len 2
-#define	reg_aagc_min_if_agc_9_8_lsb 8
-#define xd_p_reg_aagc_lock_sample_scale	0xA00E
-#define	reg_aagc_lock_sample_scale_pos 0
-#define	reg_aagc_lock_sample_scale_len 5
-#define	reg_aagc_lock_sample_scale_lsb 0
-#define xd_p_reg_aagc_rf_agc_lock_scale_acquire	0xA00F
-#define	reg_aagc_rf_agc_lock_scale_acquire_pos 0
-#define	reg_aagc_rf_agc_lock_scale_acquire_len 3
-#define	reg_aagc_rf_agc_lock_scale_acquire_lsb 0
-#define xd_p_reg_aagc_rf_agc_lock_scale_track	0xA00F
-#define	reg_aagc_rf_agc_lock_scale_track_pos 3
-#define	reg_aagc_rf_agc_lock_scale_track_len 3
-#define	reg_aagc_rf_agc_lock_scale_track_lsb 0
-#define xd_p_reg_aagc_if_agc_lock_scale_acquire	0xA010
-#define	reg_aagc_if_agc_lock_scale_acquire_pos 0
-#define	reg_aagc_if_agc_lock_scale_acquire_len 3
-#define	reg_aagc_if_agc_lock_scale_acquire_lsb 0
-#define xd_p_reg_aagc_if_agc_lock_scale_track	0xA010
-#define	reg_aagc_if_agc_lock_scale_track_pos 3
-#define	reg_aagc_if_agc_lock_scale_track_len 3
-#define	reg_aagc_if_agc_lock_scale_track_lsb 0
-#define xd_p_reg_aagc_rf_top_numerator_7_0	0xA011
-#define	reg_aagc_rf_top_numerator_7_0_pos 0
-#define	reg_aagc_rf_top_numerator_7_0_len 8
-#define	reg_aagc_rf_top_numerator_7_0_lsb 0
-#define xd_p_reg_aagc_rf_top_numerator_9_8	0xA012
-#define	reg_aagc_rf_top_numerator_9_8_pos 0
-#define	reg_aagc_rf_top_numerator_9_8_len 2
-#define	reg_aagc_rf_top_numerator_9_8_lsb 8
-#define xd_p_reg_aagc_if_top_numerator_7_0	0xA013
-#define	reg_aagc_if_top_numerator_7_0_pos 0
-#define	reg_aagc_if_top_numerator_7_0_len 8
-#define	reg_aagc_if_top_numerator_7_0_lsb 0
-#define xd_p_reg_aagc_if_top_numerator_9_8	0xA014
-#define	reg_aagc_if_top_numerator_9_8_pos 0
-#define	reg_aagc_if_top_numerator_9_8_len 2
-#define	reg_aagc_if_top_numerator_9_8_lsb 8
-#define xd_p_reg_aagc_adc_out_desired_7_0	0xA015
-#define	reg_aagc_adc_out_desired_7_0_pos 0
-#define	reg_aagc_adc_out_desired_7_0_len 8
-#define	reg_aagc_adc_out_desired_7_0_lsb 0
-#define xd_p_reg_aagc_adc_out_desired_8	0xA016
-#define	reg_aagc_adc_out_desired_8_pos 0
-#define	reg_aagc_adc_out_desired_8_len 1
-#define	reg_aagc_adc_out_desired_8_lsb 0
-#define xd_p_reg_aagc_fixed_gain	0xA016
-#define	reg_aagc_fixed_gain_pos 3
-#define	reg_aagc_fixed_gain_len 1
-#define	reg_aagc_fixed_gain_lsb 0
-#define xd_p_reg_aagc_lock_count_th	0xA016
-#define	reg_aagc_lock_count_th_pos 4
-#define	reg_aagc_lock_count_th_len 4
-#define	reg_aagc_lock_count_th_lsb 0
-#define xd_p_reg_aagc_fixed_rf_agc_control_7_0	0xA017
-#define	reg_aagc_fixed_rf_agc_control_7_0_pos 0
-#define	reg_aagc_fixed_rf_agc_control_7_0_len 8
-#define	reg_aagc_fixed_rf_agc_control_7_0_lsb 0
-#define xd_p_reg_aagc_fixed_rf_agc_control_15_8	0xA018
-#define	reg_aagc_fixed_rf_agc_control_15_8_pos 0
-#define	reg_aagc_fixed_rf_agc_control_15_8_len 8
-#define	reg_aagc_fixed_rf_agc_control_15_8_lsb 8
-#define xd_p_reg_aagc_fixed_rf_agc_control_23_16	0xA019
-#define	reg_aagc_fixed_rf_agc_control_23_16_pos 0
-#define	reg_aagc_fixed_rf_agc_control_23_16_len 8
-#define	reg_aagc_fixed_rf_agc_control_23_16_lsb 16
-#define xd_p_reg_aagc_fixed_rf_agc_control_30_24	0xA01A
-#define	reg_aagc_fixed_rf_agc_control_30_24_pos 0
-#define	reg_aagc_fixed_rf_agc_control_30_24_len 7
-#define	reg_aagc_fixed_rf_agc_control_30_24_lsb 24
-#define xd_p_reg_aagc_fixed_if_agc_control_7_0	0xA01B
-#define	reg_aagc_fixed_if_agc_control_7_0_pos 0
-#define	reg_aagc_fixed_if_agc_control_7_0_len 8
-#define	reg_aagc_fixed_if_agc_control_7_0_lsb 0
-#define xd_p_reg_aagc_fixed_if_agc_control_15_8	0xA01C
-#define	reg_aagc_fixed_if_agc_control_15_8_pos 0
-#define	reg_aagc_fixed_if_agc_control_15_8_len 8
-#define	reg_aagc_fixed_if_agc_control_15_8_lsb 8
-#define xd_p_reg_aagc_fixed_if_agc_control_23_16	0xA01D
-#define	reg_aagc_fixed_if_agc_control_23_16_pos 0
-#define	reg_aagc_fixed_if_agc_control_23_16_len 8
-#define	reg_aagc_fixed_if_agc_control_23_16_lsb 16
-#define xd_p_reg_aagc_fixed_if_agc_control_30_24	0xA01E
-#define	reg_aagc_fixed_if_agc_control_30_24_pos 0
-#define	reg_aagc_fixed_if_agc_control_30_24_len 7
-#define	reg_aagc_fixed_if_agc_control_30_24_lsb 24
-#define xd_p_reg_aagc_rf_agc_unlock_numerator	0xA01F
-#define	reg_aagc_rf_agc_unlock_numerator_pos 0
-#define	reg_aagc_rf_agc_unlock_numerator_len 6
-#define	reg_aagc_rf_agc_unlock_numerator_lsb 0
-#define xd_p_reg_aagc_if_agc_unlock_numerator	0xA020
-#define	reg_aagc_if_agc_unlock_numerator_pos 0
-#define	reg_aagc_if_agc_unlock_numerator_len 6
-#define	reg_aagc_if_agc_unlock_numerator_lsb 0
-#define xd_p_reg_unplug_th	0xA021
-#define	reg_unplug_th_pos 0
-#define	reg_unplug_th_len 8
-#define	reg_aagc_rf_x0_lsb 0
-#define xd_p_reg_weak_signal_rfagc_thr 0xA022
-#define	reg_weak_signal_rfagc_thr_pos 0
-#define	reg_weak_signal_rfagc_thr_len 8
-#define	reg_weak_signal_rfagc_thr_lsb 0
-#define xd_p_reg_unplug_rf_gain_th 0xA023
-#define	reg_unplug_rf_gain_th_pos 0
-#define	reg_unplug_rf_gain_th_len 8
-#define	reg_unplug_rf_gain_th_lsb 0
-#define xd_p_reg_unplug_dtop_rf_gain_th 0xA024
-#define	reg_unplug_dtop_rf_gain_th_pos 0
-#define	reg_unplug_dtop_rf_gain_th_len 8
-#define	reg_unplug_dtop_rf_gain_th_lsb 0
-#define xd_p_reg_unplug_dtop_if_gain_th 0xA025
-#define	reg_unplug_dtop_if_gain_th_pos 0
-#define	reg_unplug_dtop_if_gain_th_len 8
-#define	reg_unplug_dtop_if_gain_th_lsb 0
-#define xd_p_reg_top_recover_at_unplug_en 0xA026
-#define	reg_top_recover_at_unplug_en_pos 0
-#define	reg_top_recover_at_unplug_en_len 1
-#define	reg_top_recover_at_unplug_en_lsb 0
-#define xd_p_reg_aagc_rf_x6	0xA027
-#define	reg_aagc_rf_x6_pos 0
-#define	reg_aagc_rf_x6_len 8
-#define	reg_aagc_rf_x6_lsb 0
-#define xd_p_reg_aagc_rf_x7	0xA028
-#define	reg_aagc_rf_x7_pos 0
-#define	reg_aagc_rf_x7_len 8
-#define	reg_aagc_rf_x7_lsb 0
-#define xd_p_reg_aagc_rf_x8	0xA029
-#define	reg_aagc_rf_x8_pos 0
-#define	reg_aagc_rf_x8_len 8
-#define	reg_aagc_rf_x8_lsb 0
-#define xd_p_reg_aagc_rf_x9	0xA02A
-#define	reg_aagc_rf_x9_pos 0
-#define	reg_aagc_rf_x9_len 8
-#define	reg_aagc_rf_x9_lsb 0
-#define xd_p_reg_aagc_rf_x10	0xA02B
-#define	reg_aagc_rf_x10_pos 0
-#define	reg_aagc_rf_x10_len 8
-#define	reg_aagc_rf_x10_lsb 0
-#define xd_p_reg_aagc_rf_x11	0xA02C
-#define	reg_aagc_rf_x11_pos 0
-#define	reg_aagc_rf_x11_len 8
-#define	reg_aagc_rf_x11_lsb 0
-#define xd_p_reg_aagc_rf_x12	0xA02D
-#define	reg_aagc_rf_x12_pos 0
-#define	reg_aagc_rf_x12_len 8
-#define	reg_aagc_rf_x12_lsb 0
-#define xd_p_reg_aagc_rf_x13	0xA02E
-#define	reg_aagc_rf_x13_pos 0
-#define	reg_aagc_rf_x13_len 8
-#define	reg_aagc_rf_x13_lsb 0
-#define xd_p_reg_aagc_if_x0	0xA02F
-#define	reg_aagc_if_x0_pos 0
-#define	reg_aagc_if_x0_len 8
-#define	reg_aagc_if_x0_lsb 0
-#define xd_p_reg_aagc_if_x1	0xA030
-#define	reg_aagc_if_x1_pos 0
-#define	reg_aagc_if_x1_len 8
-#define	reg_aagc_if_x1_lsb 0
-#define xd_p_reg_aagc_if_x2	0xA031
-#define	reg_aagc_if_x2_pos 0
-#define	reg_aagc_if_x2_len 8
-#define	reg_aagc_if_x2_lsb 0
-#define xd_p_reg_aagc_if_x3	0xA032
-#define	reg_aagc_if_x3_pos 0
-#define	reg_aagc_if_x3_len 8
-#define	reg_aagc_if_x3_lsb 0
-#define xd_p_reg_aagc_if_x4	0xA033
-#define	reg_aagc_if_x4_pos 0
-#define	reg_aagc_if_x4_len 8
-#define	reg_aagc_if_x4_lsb 0
-#define xd_p_reg_aagc_if_x5	0xA034
-#define	reg_aagc_if_x5_pos 0
-#define	reg_aagc_if_x5_len 8
-#define	reg_aagc_if_x5_lsb 0
-#define xd_p_reg_aagc_if_x6	0xA035
-#define	reg_aagc_if_x6_pos 0
-#define	reg_aagc_if_x6_len 8
-#define	reg_aagc_if_x6_lsb 0
-#define xd_p_reg_aagc_if_x7	0xA036
-#define	reg_aagc_if_x7_pos 0
-#define	reg_aagc_if_x7_len 8
-#define	reg_aagc_if_x7_lsb 0
-#define xd_p_reg_aagc_if_x8	0xA037
-#define	reg_aagc_if_x8_pos 0
-#define	reg_aagc_if_x8_len 8
-#define	reg_aagc_if_x8_lsb 0
-#define xd_p_reg_aagc_if_x9	0xA038
-#define	reg_aagc_if_x9_pos 0
-#define	reg_aagc_if_x9_len 8
-#define	reg_aagc_if_x9_lsb 0
-#define xd_p_reg_aagc_if_x10	0xA039
-#define	reg_aagc_if_x10_pos 0
-#define	reg_aagc_if_x10_len 8
-#define	reg_aagc_if_x10_lsb 0
-#define xd_p_reg_aagc_if_x11	0xA03A
-#define	reg_aagc_if_x11_pos 0
-#define	reg_aagc_if_x11_len 8
-#define	reg_aagc_if_x11_lsb 0
-#define xd_p_reg_aagc_if_x12	0xA03B
-#define	reg_aagc_if_x12_pos 0
-#define	reg_aagc_if_x12_len 8
-#define	reg_aagc_if_x12_lsb 0
-#define xd_p_reg_aagc_if_x13	0xA03C
-#define	reg_aagc_if_x13_pos 0
-#define	reg_aagc_if_x13_len 8
-#define	reg_aagc_if_x13_lsb 0
-#define xd_p_reg_aagc_min_rf_ctl_8bit_for_dca	0xA03D
-#define	reg_aagc_min_rf_ctl_8bit_for_dca_pos 0
-#define	reg_aagc_min_rf_ctl_8bit_for_dca_len 8
-#define	reg_aagc_min_rf_ctl_8bit_for_dca_lsb 0
-#define xd_p_reg_aagc_min_if_ctl_8bit_for_dca	0xA03E
-#define	reg_aagc_min_if_ctl_8bit_for_dca_pos 0
-#define	reg_aagc_min_if_ctl_8bit_for_dca_len 8
-#define	reg_aagc_min_if_ctl_8bit_for_dca_lsb 0
-#define xd_r_reg_aagc_total_gain_7_0	0xA070
-#define	reg_aagc_total_gain_7_0_pos 0
-#define	reg_aagc_total_gain_7_0_len 8
-#define	reg_aagc_total_gain_7_0_lsb 0
-#define xd_r_reg_aagc_total_gain_15_8	0xA071
-#define	reg_aagc_total_gain_15_8_pos 0
-#define	reg_aagc_total_gain_15_8_len 8
-#define	reg_aagc_total_gain_15_8_lsb 8
-#define xd_p_reg_aagc_in_sat_cnt_7_0	0xA074
-#define	reg_aagc_in_sat_cnt_7_0_pos 0
-#define	reg_aagc_in_sat_cnt_7_0_len 8
-#define	reg_aagc_in_sat_cnt_7_0_lsb 0
-#define xd_p_reg_aagc_in_sat_cnt_15_8	0xA075
-#define	reg_aagc_in_sat_cnt_15_8_pos 0
-#define	reg_aagc_in_sat_cnt_15_8_len 8
-#define	reg_aagc_in_sat_cnt_15_8_lsb 8
-#define xd_p_reg_aagc_in_sat_cnt_23_16	0xA076
-#define	reg_aagc_in_sat_cnt_23_16_pos 0
-#define	reg_aagc_in_sat_cnt_23_16_len 8
-#define	reg_aagc_in_sat_cnt_23_16_lsb 16
-#define xd_p_reg_aagc_in_sat_cnt_31_24	0xA077
-#define	reg_aagc_in_sat_cnt_31_24_pos 0
-#define	reg_aagc_in_sat_cnt_31_24_len 8
-#define	reg_aagc_in_sat_cnt_31_24_lsb 24
-#define xd_r_reg_aagc_digital_rf_volt_7_0	0xA078
-#define	reg_aagc_digital_rf_volt_7_0_pos 0
-#define	reg_aagc_digital_rf_volt_7_0_len 8
-#define	reg_aagc_digital_rf_volt_7_0_lsb 0
-#define xd_r_reg_aagc_digital_rf_volt_9_8	0xA079
-#define	reg_aagc_digital_rf_volt_9_8_pos 0
-#define	reg_aagc_digital_rf_volt_9_8_len 2
-#define	reg_aagc_digital_rf_volt_9_8_lsb 8
-#define xd_r_reg_aagc_digital_if_volt_7_0	0xA07A
-#define	reg_aagc_digital_if_volt_7_0_pos 0
-#define	reg_aagc_digital_if_volt_7_0_len 8
-#define	reg_aagc_digital_if_volt_7_0_lsb 0
-#define xd_r_reg_aagc_digital_if_volt_9_8	0xA07B
-#define	reg_aagc_digital_if_volt_9_8_pos 0
-#define	reg_aagc_digital_if_volt_9_8_len 2
-#define	reg_aagc_digital_if_volt_9_8_lsb 8
-#define xd_r_reg_aagc_rf_gain	0xA07C
-#define	reg_aagc_rf_gain_pos 0
-#define	reg_aagc_rf_gain_len 8
-#define	reg_aagc_rf_gain_lsb 0
-#define xd_r_reg_aagc_if_gain	0xA07D
-#define	reg_aagc_if_gain_pos 0
-#define	reg_aagc_if_gain_len 8
-#define	reg_aagc_if_gain_lsb 0
-#define xd_p_tinr_imp_indicator	0xA080
-#define	tinr_imp_indicator_pos 0
-#define	tinr_imp_indicator_len 2
-#define	tinr_imp_indicator_lsb 0
-#define xd_p_reg_tinr_fifo_size	0xA080
-#define	reg_tinr_fifo_size_pos 2
-#define	reg_tinr_fifo_size_len 5
-#define	reg_tinr_fifo_size_lsb 0
-#define xd_p_reg_tinr_saturation_cnt_th	0xA081
-#define	reg_tinr_saturation_cnt_th_pos 0
-#define	reg_tinr_saturation_cnt_th_len 4
-#define	reg_tinr_saturation_cnt_th_lsb 0
-#define xd_p_reg_tinr_saturation_th_3_0	0xA081
-#define	reg_tinr_saturation_th_3_0_pos 4
-#define	reg_tinr_saturation_th_3_0_len 4
-#define	reg_tinr_saturation_th_3_0_lsb 0
-#define xd_p_reg_tinr_saturation_th_8_4	0xA082
-#define	reg_tinr_saturation_th_8_4_pos 0
-#define	reg_tinr_saturation_th_8_4_len 5
-#define	reg_tinr_saturation_th_8_4_lsb 4
-#define xd_p_reg_tinr_imp_duration_th_2k_7_0	0xA083
-#define	reg_tinr_imp_duration_th_2k_7_0_pos 0
-#define	reg_tinr_imp_duration_th_2k_7_0_len 8
-#define	reg_tinr_imp_duration_th_2k_7_0_lsb 0
-#define xd_p_reg_tinr_imp_duration_th_2k_8	0xA084
-#define	reg_tinr_imp_duration_th_2k_8_pos 0
-#define	reg_tinr_imp_duration_th_2k_8_len 1
-#define	reg_tinr_imp_duration_th_2k_8_lsb 0
-#define xd_p_reg_tinr_imp_duration_th_8k_7_0	0xA085
-#define	reg_tinr_imp_duration_th_8k_7_0_pos 0
-#define	reg_tinr_imp_duration_th_8k_7_0_len 8
-#define	reg_tinr_imp_duration_th_8k_7_0_lsb 0
-#define xd_p_reg_tinr_imp_duration_th_8k_10_8	0xA086
-#define	reg_tinr_imp_duration_th_8k_10_8_pos 0
-#define	reg_tinr_imp_duration_th_8k_10_8_len 3
-#define	reg_tinr_imp_duration_th_8k_10_8_lsb 8
-#define xd_p_reg_tinr_freq_ratio_6m_7_0	0xA087
-#define	reg_tinr_freq_ratio_6m_7_0_pos 0
-#define	reg_tinr_freq_ratio_6m_7_0_len 8
-#define	reg_tinr_freq_ratio_6m_7_0_lsb 0
-#define xd_p_reg_tinr_freq_ratio_6m_12_8	0xA088
-#define	reg_tinr_freq_ratio_6m_12_8_pos 0
-#define	reg_tinr_freq_ratio_6m_12_8_len 5
-#define	reg_tinr_freq_ratio_6m_12_8_lsb 8
-#define xd_p_reg_tinr_freq_ratio_7m_7_0	0xA089
-#define	reg_tinr_freq_ratio_7m_7_0_pos 0
-#define	reg_tinr_freq_ratio_7m_7_0_len 8
-#define	reg_tinr_freq_ratio_7m_7_0_lsb 0
-#define xd_p_reg_tinr_freq_ratio_7m_12_8	0xA08A
-#define	reg_tinr_freq_ratio_7m_12_8_pos 0
-#define	reg_tinr_freq_ratio_7m_12_8_len 5
-#define	reg_tinr_freq_ratio_7m_12_8_lsb 8
-#define xd_p_reg_tinr_freq_ratio_8m_7_0	0xA08B
-#define	reg_tinr_freq_ratio_8m_7_0_pos 0
-#define	reg_tinr_freq_ratio_8m_7_0_len 8
-#define	reg_tinr_freq_ratio_8m_7_0_lsb 0
-#define xd_p_reg_tinr_freq_ratio_8m_12_8	0xA08C
-#define	reg_tinr_freq_ratio_8m_12_8_pos 0
-#define	reg_tinr_freq_ratio_8m_12_8_len 5
-#define	reg_tinr_freq_ratio_8m_12_8_lsb 8
-#define xd_p_reg_tinr_imp_duration_th_low_2k	0xA08D
-#define	reg_tinr_imp_duration_th_low_2k_pos 0
-#define	reg_tinr_imp_duration_th_low_2k_len 8
-#define	reg_tinr_imp_duration_th_low_2k_lsb 0
-#define xd_p_reg_tinr_imp_duration_th_low_8k	0xA08E
-#define	reg_tinr_imp_duration_th_low_8k_pos 0
-#define	reg_tinr_imp_duration_th_low_8k_len 8
-#define	reg_tinr_imp_duration_th_low_8k_lsb 0
-#define xd_r_reg_tinr_counter_7_0	0xA090
-#define	reg_tinr_counter_7_0_pos 0
-#define	reg_tinr_counter_7_0_len 8
-#define	reg_tinr_counter_7_0_lsb 0
-#define xd_r_reg_tinr_counter_15_8	0xA091
-#define	reg_tinr_counter_15_8_pos 0
-#define	reg_tinr_counter_15_8_len 8
-#define	reg_tinr_counter_15_8_lsb 8
-#define xd_p_reg_tinr_adative_tinr_en	0xA093
-#define	reg_tinr_adative_tinr_en_pos 0
-#define	reg_tinr_adative_tinr_en_len 1
-#define	reg_tinr_adative_tinr_en_lsb 0
-#define xd_p_reg_tinr_peak_fifo_size	0xA093
-#define	reg_tinr_peak_fifo_size_pos 1
-#define	reg_tinr_peak_fifo_size_len 5
-#define	reg_tinr_peak_fifo_size_lsb 0
-#define xd_p_reg_tinr_counter_rst	0xA093
-#define	reg_tinr_counter_rst_pos 6
-#define	reg_tinr_counter_rst_len 1
-#define	reg_tinr_counter_rst_lsb 0
-#define xd_p_reg_tinr_search_period_7_0	0xA094
-#define	reg_tinr_search_period_7_0_pos 0
-#define	reg_tinr_search_period_7_0_len 8
-#define	reg_tinr_search_period_7_0_lsb 0
-#define xd_p_reg_tinr_search_period_15_8	0xA095
-#define	reg_tinr_search_period_15_8_pos 0
-#define	reg_tinr_search_period_15_8_len 8
-#define	reg_tinr_search_period_15_8_lsb 8
-#define xd_p_reg_ccifs_fcw_7_0	0xA0A0
-#define	reg_ccifs_fcw_7_0_pos 0
-#define	reg_ccifs_fcw_7_0_len 8
-#define	reg_ccifs_fcw_7_0_lsb 0
-#define xd_p_reg_ccifs_fcw_12_8	0xA0A1
-#define	reg_ccifs_fcw_12_8_pos 0
-#define	reg_ccifs_fcw_12_8_len 5
-#define	reg_ccifs_fcw_12_8_lsb 8
-#define xd_p_reg_ccifs_spec_inv	0xA0A1
-#define	reg_ccifs_spec_inv_pos 5
-#define	reg_ccifs_spec_inv_len 1
-#define	reg_ccifs_spec_inv_lsb 0
-#define xd_p_reg_gp_trigger	0xA0A2
-#define	reg_gp_trigger_pos 0
-#define	reg_gp_trigger_len 1
-#define	reg_gp_trigger_lsb 0
-#define xd_p_reg_trigger_sel	0xA0A2
-#define	reg_trigger_sel_pos 1
-#define	reg_trigger_sel_len 2
-#define	reg_trigger_sel_lsb 0
-#define xd_p_reg_debug_ofdm	0xA0A2
-#define	reg_debug_ofdm_pos 3
-#define	reg_debug_ofdm_len 2
-#define	reg_debug_ofdm_lsb 0
-#define xd_p_reg_trigger_module_sel	0xA0A3
-#define	reg_trigger_module_sel_pos 0
-#define	reg_trigger_module_sel_len 6
-#define	reg_trigger_module_sel_lsb 0
-#define xd_p_reg_trigger_set_sel	0xA0A4
-#define	reg_trigger_set_sel_pos 0
-#define	reg_trigger_set_sel_len 6
-#define	reg_trigger_set_sel_lsb 0
-#define xd_p_reg_fw_int_mask_n	0xA0A4
-#define	reg_fw_int_mask_n_pos 6
-#define	reg_fw_int_mask_n_len 1
-#define	reg_fw_int_mask_n_lsb 0
-#define xd_p_reg_debug_group	0xA0A5
-#define	reg_debug_group_pos 0
-#define	reg_debug_group_len 4
-#define	reg_debug_group_lsb 0
-#define xd_p_reg_odbg_clk_sel	0xA0A5
-#define	reg_odbg_clk_sel_pos 4
-#define	reg_odbg_clk_sel_len 2
-#define	reg_odbg_clk_sel_lsb 0
-#define xd_p_reg_ccif_sc	0xA0C0
-#define	reg_ccif_sc_pos 0
-#define	reg_ccif_sc_len 4
-#define	reg_ccif_sc_lsb 0
-#define xd_r_reg_ccif_saturate	0xA0C1
-#define	reg_ccif_saturate_pos 0
-#define	reg_ccif_saturate_len 2
-#define	reg_ccif_saturate_lsb 0
-#define xd_r_reg_antif_saturate	0xA0C1
-#define	reg_antif_saturate_pos 2
-#define	reg_antif_saturate_len 4
-#define	reg_antif_saturate_lsb 0
-#define xd_r_reg_acif_saturate	0xA0C2
-#define	reg_acif_saturate_pos 0
-#define	reg_acif_saturate_len 8
-#define	reg_acif_saturate_lsb 0
-#define xd_p_reg_tmr_timer0_threshold_7_0	0xA0C8
-#define	reg_tmr_timer0_threshold_7_0_pos 0
-#define	reg_tmr_timer0_threshold_7_0_len 8
-#define	reg_tmr_timer0_threshold_7_0_lsb 0
-#define xd_p_reg_tmr_timer0_threshold_15_8	0xA0C9
-#define	reg_tmr_timer0_threshold_15_8_pos 0
-#define	reg_tmr_timer0_threshold_15_8_len 8
-#define	reg_tmr_timer0_threshold_15_8_lsb 8
-#define xd_p_reg_tmr_timer0_enable	0xA0CA
-#define	reg_tmr_timer0_enable_pos 0
-#define	reg_tmr_timer0_enable_len 1
-#define	reg_tmr_timer0_enable_lsb 0
-#define xd_p_reg_tmr_timer0_clk_sel	0xA0CA
-#define	reg_tmr_timer0_clk_sel_pos 1
-#define	reg_tmr_timer0_clk_sel_len 1
-#define	reg_tmr_timer0_clk_sel_lsb 0
-#define xd_p_reg_tmr_timer0_int	0xA0CA
-#define	reg_tmr_timer0_int_pos 2
-#define	reg_tmr_timer0_int_len 1
-#define	reg_tmr_timer0_int_lsb 0
-#define xd_p_reg_tmr_timer0_rst	0xA0CA
-#define	reg_tmr_timer0_rst_pos 3
-#define	reg_tmr_timer0_rst_len 1
-#define	reg_tmr_timer0_rst_lsb 0
-#define xd_r_reg_tmr_timer0_count_7_0	0xA0CB
-#define	reg_tmr_timer0_count_7_0_pos 0
-#define	reg_tmr_timer0_count_7_0_len 8
-#define	reg_tmr_timer0_count_7_0_lsb 0
-#define xd_r_reg_tmr_timer0_count_15_8	0xA0CC
-#define	reg_tmr_timer0_count_15_8_pos 0
-#define	reg_tmr_timer0_count_15_8_len 8
-#define	reg_tmr_timer0_count_15_8_lsb 8
-#define xd_p_reg_suspend	0xA0CD
-#define	reg_suspend_pos 0
-#define	reg_suspend_len 1
-#define	reg_suspend_lsb 0
-#define xd_p_reg_suspend_rdy	0xA0CD
-#define	reg_suspend_rdy_pos 1
-#define	reg_suspend_rdy_len 1
-#define	reg_suspend_rdy_lsb 0
-#define xd_p_reg_resume	0xA0CD
-#define	reg_resume_pos 2
-#define	reg_resume_len 1
-#define	reg_resume_lsb 0
-#define xd_p_reg_resume_rdy	0xA0CD
-#define	reg_resume_rdy_pos 3
-#define	reg_resume_rdy_len 1
-#define	reg_resume_rdy_lsb 0
-#define xd_p_reg_fmf	0xA0CE
-#define	reg_fmf_pos 0
-#define	reg_fmf_len 8
-#define	reg_fmf_lsb 0
-#define xd_p_ccid_accumulate_num_2k_7_0	0xA100
-#define	ccid_accumulate_num_2k_7_0_pos 0
-#define	ccid_accumulate_num_2k_7_0_len 8
-#define	ccid_accumulate_num_2k_7_0_lsb 0
-#define xd_p_ccid_accumulate_num_2k_12_8	0xA101
-#define	ccid_accumulate_num_2k_12_8_pos 0
-#define	ccid_accumulate_num_2k_12_8_len 5
-#define	ccid_accumulate_num_2k_12_8_lsb 8
-#define xd_p_ccid_accumulate_num_8k_7_0	0xA102
-#define	ccid_accumulate_num_8k_7_0_pos 0
-#define	ccid_accumulate_num_8k_7_0_len 8
-#define	ccid_accumulate_num_8k_7_0_lsb 0
-#define xd_p_ccid_accumulate_num_8k_14_8	0xA103
-#define	ccid_accumulate_num_8k_14_8_pos 0
-#define	ccid_accumulate_num_8k_14_8_len 7
-#define	ccid_accumulate_num_8k_14_8_lsb 8
-#define xd_p_ccid_desired_level_0	0xA103
-#define	ccid_desired_level_0_pos 7
-#define	ccid_desired_level_0_len 1
-#define	ccid_desired_level_0_lsb 0
-#define xd_p_ccid_desired_level_8_1	0xA104
-#define	ccid_desired_level_8_1_pos 0
-#define	ccid_desired_level_8_1_len 8
-#define	ccid_desired_level_8_1_lsb 1
-#define xd_p_ccid_apply_delay	0xA105
-#define	ccid_apply_delay_pos 0
-#define	ccid_apply_delay_len 7
-#define	ccid_apply_delay_lsb 0
-#define xd_p_ccid_CCID_Threshold1	0xA106
-#define	ccid_CCID_Threshold1_pos 0
-#define	ccid_CCID_Threshold1_len 8
-#define	ccid_CCID_Threshold1_lsb 0
-#define xd_p_ccid_CCID_Threshold2	0xA107
-#define	ccid_CCID_Threshold2_pos 0
-#define	ccid_CCID_Threshold2_len 8
-#define	ccid_CCID_Threshold2_lsb 0
-#define xd_p_reg_ccid_gain_scale	0xA108
-#define	reg_ccid_gain_scale_pos 0
-#define	reg_ccid_gain_scale_len 4
-#define	reg_ccid_gain_scale_lsb 0
-#define xd_p_reg_ccid2_passband_gain_set	0xA108
-#define	reg_ccid2_passband_gain_set_pos 4
-#define	reg_ccid2_passband_gain_set_len 4
-#define	reg_ccid2_passband_gain_set_lsb 0
-#define xd_r_ccid_multiplier_7_0	0xA109
-#define	ccid_multiplier_7_0_pos 0
-#define	ccid_multiplier_7_0_len 8
-#define	ccid_multiplier_7_0_lsb 0
-#define xd_r_ccid_multiplier_15_8	0xA10A
-#define	ccid_multiplier_15_8_pos 0
-#define	ccid_multiplier_15_8_len 8
-#define	ccid_multiplier_15_8_lsb 8
-#define xd_r_ccid_right_shift_bits	0xA10B
-#define	ccid_right_shift_bits_pos 0
-#define	ccid_right_shift_bits_len 4
-#define	ccid_right_shift_bits_lsb 0
-#define xd_r_reg_ccid_sx_7_0	0xA10C
-#define	reg_ccid_sx_7_0_pos 0
-#define	reg_ccid_sx_7_0_len 8
-#define	reg_ccid_sx_7_0_lsb 0
-#define xd_r_reg_ccid_sx_15_8	0xA10D
-#define	reg_ccid_sx_15_8_pos 0
-#define	reg_ccid_sx_15_8_len 8
-#define	reg_ccid_sx_15_8_lsb 8
-#define xd_r_reg_ccid_sx_21_16	0xA10E
-#define	reg_ccid_sx_21_16_pos 0
-#define	reg_ccid_sx_21_16_len 6
-#define	reg_ccid_sx_21_16_lsb 16
-#define xd_r_reg_ccid_sy_7_0	0xA110
-#define	reg_ccid_sy_7_0_pos 0
-#define	reg_ccid_sy_7_0_len 8
-#define	reg_ccid_sy_7_0_lsb 0
-#define xd_r_reg_ccid_sy_15_8	0xA111
-#define	reg_ccid_sy_15_8_pos 0
-#define	reg_ccid_sy_15_8_len 8
-#define	reg_ccid_sy_15_8_lsb 8
-#define xd_r_reg_ccid_sy_23_16	0xA112
-#define	reg_ccid_sy_23_16_pos 0
-#define	reg_ccid_sy_23_16_len 8
-#define	reg_ccid_sy_23_16_lsb 16
-#define xd_r_reg_ccid2_sz_7_0	0xA114
-#define	reg_ccid2_sz_7_0_pos 0
-#define	reg_ccid2_sz_7_0_len 8
-#define	reg_ccid2_sz_7_0_lsb 0
-#define xd_r_reg_ccid2_sz_15_8	0xA115
-#define	reg_ccid2_sz_15_8_pos 0
-#define	reg_ccid2_sz_15_8_len 8
-#define	reg_ccid2_sz_15_8_lsb 8
-#define xd_r_reg_ccid2_sz_23_16	0xA116
-#define	reg_ccid2_sz_23_16_pos 0
-#define	reg_ccid2_sz_23_16_len 8
-#define	reg_ccid2_sz_23_16_lsb 16
-#define xd_r_reg_ccid2_sz_25_24	0xA117
-#define	reg_ccid2_sz_25_24_pos 0
-#define	reg_ccid2_sz_25_24_len 2
-#define	reg_ccid2_sz_25_24_lsb 24
-#define xd_r_reg_ccid2_sy_7_0	0xA118
-#define	reg_ccid2_sy_7_0_pos 0
-#define	reg_ccid2_sy_7_0_len 8
-#define	reg_ccid2_sy_7_0_lsb 0
-#define xd_r_reg_ccid2_sy_15_8	0xA119
-#define	reg_ccid2_sy_15_8_pos 0
-#define	reg_ccid2_sy_15_8_len 8
-#define	reg_ccid2_sy_15_8_lsb 8
-#define xd_r_reg_ccid2_sy_23_16	0xA11A
-#define	reg_ccid2_sy_23_16_pos 0
-#define	reg_ccid2_sy_23_16_len 8
-#define	reg_ccid2_sy_23_16_lsb 16
-#define xd_r_reg_ccid2_sy_25_24	0xA11B
-#define	reg_ccid2_sy_25_24_pos 0
-#define	reg_ccid2_sy_25_24_len 2
-#define	reg_ccid2_sy_25_24_lsb 24
-#define xd_p_dagc1_accumulate_num_2k_7_0	0xA120
-#define	dagc1_accumulate_num_2k_7_0_pos 0
-#define	dagc1_accumulate_num_2k_7_0_len 8
-#define	dagc1_accumulate_num_2k_7_0_lsb 0
-#define xd_p_dagc1_accumulate_num_2k_12_8	0xA121
-#define	dagc1_accumulate_num_2k_12_8_pos 0
-#define	dagc1_accumulate_num_2k_12_8_len 5
-#define	dagc1_accumulate_num_2k_12_8_lsb 8
-#define xd_p_dagc1_accumulate_num_8k_7_0	0xA122
-#define	dagc1_accumulate_num_8k_7_0_pos 0
-#define	dagc1_accumulate_num_8k_7_0_len 8
-#define	dagc1_accumulate_num_8k_7_0_lsb 0
-#define xd_p_dagc1_accumulate_num_8k_14_8	0xA123
-#define	dagc1_accumulate_num_8k_14_8_pos 0
-#define	dagc1_accumulate_num_8k_14_8_len 7
-#define	dagc1_accumulate_num_8k_14_8_lsb 8
-#define xd_p_dagc1_desired_level_0	0xA123
-#define	dagc1_desired_level_0_pos 7
-#define	dagc1_desired_level_0_len 1
-#define	dagc1_desired_level_0_lsb 0
-#define xd_p_dagc1_desired_level_8_1	0xA124
-#define	dagc1_desired_level_8_1_pos 0
-#define	dagc1_desired_level_8_1_len 8
-#define	dagc1_desired_level_8_1_lsb 1
-#define xd_p_dagc1_apply_delay	0xA125
-#define	dagc1_apply_delay_pos 0
-#define	dagc1_apply_delay_len 7
-#define	dagc1_apply_delay_lsb 0
-#define xd_p_dagc1_bypass_scale_ctl	0xA126
-#define	dagc1_bypass_scale_ctl_pos 0
-#define	dagc1_bypass_scale_ctl_len 2
-#define	dagc1_bypass_scale_ctl_lsb 0
-#define xd_p_reg_dagc1_in_sat_cnt_7_0	0xA127
-#define	reg_dagc1_in_sat_cnt_7_0_pos 0
-#define	reg_dagc1_in_sat_cnt_7_0_len 8
-#define	reg_dagc1_in_sat_cnt_7_0_lsb 0
-#define xd_p_reg_dagc1_in_sat_cnt_15_8	0xA128
-#define	reg_dagc1_in_sat_cnt_15_8_pos 0
-#define	reg_dagc1_in_sat_cnt_15_8_len 8
-#define	reg_dagc1_in_sat_cnt_15_8_lsb 8
-#define xd_p_reg_dagc1_in_sat_cnt_23_16	0xA129
-#define	reg_dagc1_in_sat_cnt_23_16_pos 0
-#define	reg_dagc1_in_sat_cnt_23_16_len 8
-#define	reg_dagc1_in_sat_cnt_23_16_lsb 16
-#define xd_p_reg_dagc1_in_sat_cnt_31_24	0xA12A
-#define	reg_dagc1_in_sat_cnt_31_24_pos 0
-#define	reg_dagc1_in_sat_cnt_31_24_len 8
-#define	reg_dagc1_in_sat_cnt_31_24_lsb 24
-#define xd_p_reg_dagc1_out_sat_cnt_7_0	0xA12B
-#define	reg_dagc1_out_sat_cnt_7_0_pos 0
-#define	reg_dagc1_out_sat_cnt_7_0_len 8
-#define	reg_dagc1_out_sat_cnt_7_0_lsb 0
-#define xd_p_reg_dagc1_out_sat_cnt_15_8	0xA12C
-#define	reg_dagc1_out_sat_cnt_15_8_pos 0
-#define	reg_dagc1_out_sat_cnt_15_8_len 8
-#define	reg_dagc1_out_sat_cnt_15_8_lsb 8
-#define xd_p_reg_dagc1_out_sat_cnt_23_16	0xA12D
-#define	reg_dagc1_out_sat_cnt_23_16_pos 0
-#define	reg_dagc1_out_sat_cnt_23_16_len 8
-#define	reg_dagc1_out_sat_cnt_23_16_lsb 16
-#define xd_p_reg_dagc1_out_sat_cnt_31_24	0xA12E
-#define	reg_dagc1_out_sat_cnt_31_24_pos 0
-#define	reg_dagc1_out_sat_cnt_31_24_len 8
-#define	reg_dagc1_out_sat_cnt_31_24_lsb 24
-#define xd_r_dagc1_multiplier_7_0	0xA136
-#define	dagc1_multiplier_7_0_pos 0
-#define	dagc1_multiplier_7_0_len 8
-#define	dagc1_multiplier_7_0_lsb 0
-#define xd_r_dagc1_multiplier_15_8	0xA137
-#define	dagc1_multiplier_15_8_pos 0
-#define	dagc1_multiplier_15_8_len 8
-#define	dagc1_multiplier_15_8_lsb 8
-#define xd_r_dagc1_right_shift_bits	0xA138
-#define	dagc1_right_shift_bits_pos 0
-#define	dagc1_right_shift_bits_len 4
-#define	dagc1_right_shift_bits_lsb 0
-#define xd_p_reg_bfs_fcw_7_0	0xA140
-#define	reg_bfs_fcw_7_0_pos 0
-#define	reg_bfs_fcw_7_0_len 8
-#define	reg_bfs_fcw_7_0_lsb 0
-#define xd_p_reg_bfs_fcw_15_8	0xA141
-#define	reg_bfs_fcw_15_8_pos 0
-#define	reg_bfs_fcw_15_8_len 8
-#define	reg_bfs_fcw_15_8_lsb 8
-#define xd_p_reg_bfs_fcw_22_16	0xA142
-#define	reg_bfs_fcw_22_16_pos 0
-#define	reg_bfs_fcw_22_16_len 7
-#define	reg_bfs_fcw_22_16_lsb 16
-#define xd_p_reg_antif_sf_7_0	0xA144
-#define	reg_antif_sf_7_0_pos 0
-#define	reg_antif_sf_7_0_len 8
-#define	reg_antif_sf_7_0_lsb 0
-#define xd_p_reg_antif_sf_11_8	0xA145
-#define	reg_antif_sf_11_8_pos 0
-#define	reg_antif_sf_11_8_len 4
-#define	reg_antif_sf_11_8_lsb 8
-#define xd_r_bfs_fcw_q_7_0	0xA150
-#define	bfs_fcw_q_7_0_pos 0
-#define	bfs_fcw_q_7_0_len 8
-#define	bfs_fcw_q_7_0_lsb 0
-#define xd_r_bfs_fcw_q_15_8	0xA151
-#define	bfs_fcw_q_15_8_pos 0
-#define	bfs_fcw_q_15_8_len 8
-#define	bfs_fcw_q_15_8_lsb 8
-#define xd_r_bfs_fcw_q_22_16	0xA152
-#define	bfs_fcw_q_22_16_pos 0
-#define	bfs_fcw_q_22_16_len 7
-#define	bfs_fcw_q_22_16_lsb 16
-#define xd_p_reg_dca_enu	0xA160
-#define	reg_dca_enu_pos 0
-#define	reg_dca_enu_len 1
-#define	reg_dca_enu_lsb 0
-#define xd_p_reg_dca_enl	0xA160
-#define	reg_dca_enl_pos 1
-#define	reg_dca_enl_len 1
-#define	reg_dca_enl_lsb 0
-#define xd_p_reg_dca_lower_chip	0xA160
-#define	reg_dca_lower_chip_pos 2
-#define	reg_dca_lower_chip_len 1
-#define	reg_dca_lower_chip_lsb 0
-#define xd_p_reg_dca_upper_chip	0xA160
-#define	reg_dca_upper_chip_pos 3
-#define	reg_dca_upper_chip_len 1
-#define	reg_dca_upper_chip_lsb 0
-#define xd_p_reg_dca_platch	0xA160
-#define	reg_dca_platch_pos 4
-#define	reg_dca_platch_len 1
-#define	reg_dca_platch_lsb 0
-#define xd_p_reg_dca_th	0xA161
-#define	reg_dca_th_pos 0
-#define	reg_dca_th_len 5
-#define	reg_dca_th_lsb 0
-#define xd_p_reg_dca_scale	0xA162
-#define	reg_dca_scale_pos 0
-#define	reg_dca_scale_len 4
-#define	reg_dca_scale_lsb 0
-#define xd_p_reg_dca_tone_7_0	0xA163
-#define	reg_dca_tone_7_0_pos 0
-#define	reg_dca_tone_7_0_len 8
-#define	reg_dca_tone_7_0_lsb 0
-#define xd_p_reg_dca_tone_12_8	0xA164
-#define	reg_dca_tone_12_8_pos 0
-#define	reg_dca_tone_12_8_len 5
-#define	reg_dca_tone_12_8_lsb 8
-#define xd_p_reg_dca_time_7_0	0xA165
-#define	reg_dca_time_7_0_pos 0
-#define	reg_dca_time_7_0_len 8
-#define	reg_dca_time_7_0_lsb 0
-#define xd_p_reg_dca_time_15_8	0xA166
-#define	reg_dca_time_15_8_pos 0
-#define	reg_dca_time_15_8_len 8
-#define	reg_dca_time_15_8_lsb 8
-#define xd_r_dcasm	0xA167
-#define	dcasm_pos 0
-#define	dcasm_len 3
-#define	dcasm_lsb 0
-#define xd_p_reg_qnt_valuew_7_0	0xA168
-#define	reg_qnt_valuew_7_0_pos 0
-#define	reg_qnt_valuew_7_0_len 8
-#define	reg_qnt_valuew_7_0_lsb 0
-#define xd_p_reg_qnt_valuew_10_8	0xA169
-#define	reg_qnt_valuew_10_8_pos 0
-#define	reg_qnt_valuew_10_8_len 3
-#define	reg_qnt_valuew_10_8_lsb 8
-#define xd_p_dca_sbx_gain_diff_7_0	0xA16A
-#define	dca_sbx_gain_diff_7_0_pos 0
-#define	dca_sbx_gain_diff_7_0_len 8
-#define	dca_sbx_gain_diff_7_0_lsb 0
-#define xd_p_dca_sbx_gain_diff_9_8	0xA16B
-#define	dca_sbx_gain_diff_9_8_pos 0
-#define	dca_sbx_gain_diff_9_8_len 2
-#define	dca_sbx_gain_diff_9_8_lsb 8
-#define xd_p_reg_dca_stand_alone	0xA16C
-#define	reg_dca_stand_alone_pos 0
-#define	reg_dca_stand_alone_len 1
-#define	reg_dca_stand_alone_lsb 0
-#define xd_p_reg_dca_upper_out_en	0xA16C
-#define	reg_dca_upper_out_en_pos 1
-#define	reg_dca_upper_out_en_len 1
-#define	reg_dca_upper_out_en_lsb 0
-#define xd_p_reg_dca_rc_en	0xA16C
-#define	reg_dca_rc_en_pos 2
-#define	reg_dca_rc_en_len 1
-#define	reg_dca_rc_en_lsb 0
-#define xd_p_reg_dca_retrain_send	0xA16C
-#define	reg_dca_retrain_send_pos 3
-#define	reg_dca_retrain_send_len 1
-#define	reg_dca_retrain_send_lsb 0
-#define xd_p_reg_dca_retrain_rec	0xA16C
-#define	reg_dca_retrain_rec_pos 4
-#define	reg_dca_retrain_rec_len 1
-#define	reg_dca_retrain_rec_lsb 0
-#define xd_p_reg_dca_api_tpsrdy	0xA16C
-#define	reg_dca_api_tpsrdy_pos 5
-#define	reg_dca_api_tpsrdy_len 1
-#define	reg_dca_api_tpsrdy_lsb 0
-#define xd_p_reg_dca_symbol_gap	0xA16D
-#define	reg_dca_symbol_gap_pos 0
-#define	reg_dca_symbol_gap_len 4
-#define	reg_dca_symbol_gap_lsb 0
-#define xd_p_reg_qnt_nfvaluew_7_0	0xA16E
-#define	reg_qnt_nfvaluew_7_0_pos 0
-#define	reg_qnt_nfvaluew_7_0_len 8
-#define	reg_qnt_nfvaluew_7_0_lsb 0
-#define xd_p_reg_qnt_nfvaluew_10_8	0xA16F
-#define	reg_qnt_nfvaluew_10_8_pos 0
-#define	reg_qnt_nfvaluew_10_8_len 3
-#define	reg_qnt_nfvaluew_10_8_lsb 8
-#define xd_p_reg_qnt_flatness_thr_7_0	0xA170
-#define	reg_qnt_flatness_thr_7_0_pos 0
-#define	reg_qnt_flatness_thr_7_0_len 8
-#define	reg_qnt_flatness_thr_7_0_lsb 0
-#define xd_p_reg_qnt_flatness_thr_9_8	0xA171
-#define	reg_qnt_flatness_thr_9_8_pos 0
-#define	reg_qnt_flatness_thr_9_8_len 2
-#define	reg_qnt_flatness_thr_9_8_lsb 8
-#define xd_p_reg_dca_tone_idx_5_0	0xA171
-#define	reg_dca_tone_idx_5_0_pos 2
-#define	reg_dca_tone_idx_5_0_len 6
-#define	reg_dca_tone_idx_5_0_lsb 0
-#define xd_p_reg_dca_tone_idx_12_6	0xA172
-#define	reg_dca_tone_idx_12_6_pos 0
-#define	reg_dca_tone_idx_12_6_len 7
-#define	reg_dca_tone_idx_12_6_lsb 6
-#define xd_p_reg_dca_data_vld	0xA173
-#define	reg_dca_data_vld_pos 0
-#define	reg_dca_data_vld_len 1
-#define	reg_dca_data_vld_lsb 0
-#define xd_p_reg_dca_read_update	0xA173
-#define	reg_dca_read_update_pos 1
-#define	reg_dca_read_update_len 1
-#define	reg_dca_read_update_lsb 0
-#define xd_r_reg_dca_data_re_5_0	0xA173
-#define	reg_dca_data_re_5_0_pos 2
-#define	reg_dca_data_re_5_0_len 6
-#define	reg_dca_data_re_5_0_lsb 0
-#define xd_r_reg_dca_data_re_10_6	0xA174
-#define	reg_dca_data_re_10_6_pos 0
-#define	reg_dca_data_re_10_6_len 5
-#define	reg_dca_data_re_10_6_lsb 6
-#define xd_r_reg_dca_data_im_7_0	0xA175
-#define	reg_dca_data_im_7_0_pos 0
-#define	reg_dca_data_im_7_0_len 8
-#define	reg_dca_data_im_7_0_lsb 0
-#define xd_r_reg_dca_data_im_10_8	0xA176
-#define	reg_dca_data_im_10_8_pos 0
-#define	reg_dca_data_im_10_8_len 3
-#define	reg_dca_data_im_10_8_lsb 8
-#define xd_r_reg_dca_data_h2_7_0	0xA178
-#define	reg_dca_data_h2_7_0_pos 0
-#define	reg_dca_data_h2_7_0_len 8
-#define	reg_dca_data_h2_7_0_lsb 0
-#define xd_r_reg_dca_data_h2_9_8	0xA179
-#define	reg_dca_data_h2_9_8_pos 0
-#define	reg_dca_data_h2_9_8_len 2
-#define	reg_dca_data_h2_9_8_lsb 8
-#define xd_p_reg_f_adc_7_0	0xA180
-#define	reg_f_adc_7_0_pos 0
-#define	reg_f_adc_7_0_len 8
-#define	reg_f_adc_7_0_lsb 0
-#define xd_p_reg_f_adc_15_8	0xA181
-#define	reg_f_adc_15_8_pos 0
-#define	reg_f_adc_15_8_len 8
-#define	reg_f_adc_15_8_lsb 8
-#define xd_p_reg_f_adc_23_16	0xA182
-#define	reg_f_adc_23_16_pos 0
-#define	reg_f_adc_23_16_len 8
-#define	reg_f_adc_23_16_lsb 16
-#define xd_r_intp_mu_7_0	0xA190
-#define	intp_mu_7_0_pos 0
-#define	intp_mu_7_0_len 8
-#define	intp_mu_7_0_lsb 0
-#define xd_r_intp_mu_15_8	0xA191
-#define	intp_mu_15_8_pos 0
-#define	intp_mu_15_8_len 8
-#define	intp_mu_15_8_lsb 8
-#define xd_r_intp_mu_19_16	0xA192
-#define	intp_mu_19_16_pos 0
-#define	intp_mu_19_16_len 4
-#define	intp_mu_19_16_lsb 16
-#define xd_p_reg_agc_rst	0xA1A0
-#define	reg_agc_rst_pos 0
-#define	reg_agc_rst_len 1
-#define	reg_agc_rst_lsb 0
-#define xd_p_rf_agc_en	0xA1A0
-#define	rf_agc_en_pos 1
-#define	rf_agc_en_len 1
-#define	rf_agc_en_lsb 0
-#define xd_p_rf_agc_dis	0xA1A0
-#define	rf_agc_dis_pos 2
-#define	rf_agc_dis_len 1
-#define	rf_agc_dis_lsb 0
-#define xd_p_if_agc_rst	0xA1A0
-#define	if_agc_rst_pos 3
-#define	if_agc_rst_len 1
-#define	if_agc_rst_lsb 0
-#define xd_p_if_agc_en	0xA1A0
-#define	if_agc_en_pos 4
-#define	if_agc_en_len 1
-#define	if_agc_en_lsb 0
-#define xd_p_if_agc_dis	0xA1A0
-#define	if_agc_dis_pos 5
-#define	if_agc_dis_len 1
-#define	if_agc_dis_lsb 0
-#define xd_p_agc_lock	0xA1A0
-#define	agc_lock_pos 6
-#define	agc_lock_len 1
-#define	agc_lock_lsb 0
-#define xd_p_reg_tinr_rst	0xA1A1
-#define	reg_tinr_rst_pos 0
-#define	reg_tinr_rst_len 1
-#define	reg_tinr_rst_lsb 0
-#define xd_p_reg_tinr_en	0xA1A1
-#define	reg_tinr_en_pos 1
-#define	reg_tinr_en_len 1
-#define	reg_tinr_en_lsb 0
-#define xd_p_reg_ccifs_en	0xA1A2
-#define	reg_ccifs_en_pos 0
-#define	reg_ccifs_en_len 1
-#define	reg_ccifs_en_lsb 0
-#define xd_p_reg_ccifs_dis	0xA1A2
-#define	reg_ccifs_dis_pos 1
-#define	reg_ccifs_dis_len 1
-#define	reg_ccifs_dis_lsb 0
-#define xd_p_reg_ccifs_rst	0xA1A2
-#define	reg_ccifs_rst_pos 2
-#define	reg_ccifs_rst_len 1
-#define	reg_ccifs_rst_lsb 0
-#define xd_p_reg_ccifs_byp	0xA1A2
-#define	reg_ccifs_byp_pos 3
-#define	reg_ccifs_byp_len 1
-#define	reg_ccifs_byp_lsb 0
-#define xd_p_reg_ccif_en	0xA1A3
-#define	reg_ccif_en_pos 0
-#define	reg_ccif_en_len 1
-#define	reg_ccif_en_lsb 0
-#define xd_p_reg_ccif_dis	0xA1A3
-#define	reg_ccif_dis_pos 1
-#define	reg_ccif_dis_len 1
-#define	reg_ccif_dis_lsb 0
-#define xd_p_reg_ccif_rst	0xA1A3
-#define	reg_ccif_rst_pos 2
-#define	reg_ccif_rst_len 1
-#define	reg_ccif_rst_lsb 0
-#define xd_p_reg_ccif_byp	0xA1A3
-#define	reg_ccif_byp_pos 3
-#define	reg_ccif_byp_len 1
-#define	reg_ccif_byp_lsb 0
-#define xd_p_dagc1_rst	0xA1A4
-#define	dagc1_rst_pos 0
-#define	dagc1_rst_len 1
-#define	dagc1_rst_lsb 0
-#define xd_p_dagc1_en	0xA1A4
-#define	dagc1_en_pos 1
-#define	dagc1_en_len 1
-#define	dagc1_en_lsb 0
-#define xd_p_dagc1_mode	0xA1A4
-#define	dagc1_mode_pos 2
-#define	dagc1_mode_len 2
-#define	dagc1_mode_lsb 0
-#define xd_p_dagc1_done	0xA1A4
-#define	dagc1_done_pos 4
-#define	dagc1_done_len 1
-#define	dagc1_done_lsb 0
-#define xd_p_ccid_rst	0xA1A5
-#define	ccid_rst_pos 0
-#define	ccid_rst_len 1
-#define	ccid_rst_lsb 0
-#define xd_p_ccid_en	0xA1A5
-#define	ccid_en_pos 1
-#define	ccid_en_len 1
-#define	ccid_en_lsb 0
-#define xd_p_ccid_mode	0xA1A5
-#define	ccid_mode_pos 2
-#define	ccid_mode_len 2
-#define	ccid_mode_lsb 0
-#define xd_p_ccid_done	0xA1A5
-#define	ccid_done_pos 4
-#define	ccid_done_len 1
-#define	ccid_done_lsb 0
-#define xd_r_ccid_deted	0xA1A5
-#define	ccid_deted_pos 5
-#define	ccid_deted_len 1
-#define	ccid_deted_lsb 0
-#define xd_p_ccid2_en	0xA1A5
-#define	ccid2_en_pos 6
-#define	ccid2_en_len 1
-#define	ccid2_en_lsb 0
-#define xd_p_ccid2_done	0xA1A5
-#define	ccid2_done_pos 7
-#define	ccid2_done_len 1
-#define	ccid2_done_lsb 0
-#define xd_p_reg_bfs_en	0xA1A6
-#define	reg_bfs_en_pos 0
-#define	reg_bfs_en_len 1
-#define	reg_bfs_en_lsb 0
-#define xd_p_reg_bfs_dis	0xA1A6
-#define	reg_bfs_dis_pos 1
-#define	reg_bfs_dis_len 1
-#define	reg_bfs_dis_lsb 0
-#define xd_p_reg_bfs_rst	0xA1A6
-#define	reg_bfs_rst_pos 2
-#define	reg_bfs_rst_len 1
-#define	reg_bfs_rst_lsb 0
-#define xd_p_reg_bfs_byp	0xA1A6
-#define	reg_bfs_byp_pos 3
-#define	reg_bfs_byp_len 1
-#define	reg_bfs_byp_lsb 0
-#define xd_p_reg_antif_en	0xA1A7
-#define	reg_antif_en_pos 0
-#define	reg_antif_en_len 1
-#define	reg_antif_en_lsb 0
-#define xd_p_reg_antif_dis	0xA1A7
-#define	reg_antif_dis_pos 1
-#define	reg_antif_dis_len 1
-#define	reg_antif_dis_lsb 0
-#define xd_p_reg_antif_rst	0xA1A7
-#define	reg_antif_rst_pos 2
-#define	reg_antif_rst_len 1
-#define	reg_antif_rst_lsb 0
-#define xd_p_reg_antif_byp	0xA1A7
-#define	reg_antif_byp_pos 3
-#define	reg_antif_byp_len 1
-#define	reg_antif_byp_lsb 0
-#define xd_p_intp_en	0xA1A8
-#define	intp_en_pos 0
-#define	intp_en_len 1
-#define	intp_en_lsb 0
-#define xd_p_intp_dis	0xA1A8
-#define	intp_dis_pos 1
-#define	intp_dis_len 1
-#define	intp_dis_lsb 0
-#define xd_p_intp_rst	0xA1A8
-#define	intp_rst_pos 2
-#define	intp_rst_len 1
-#define	intp_rst_lsb 0
-#define xd_p_intp_byp	0xA1A8
-#define	intp_byp_pos 3
-#define	intp_byp_len 1
-#define	intp_byp_lsb 0
-#define xd_p_reg_acif_en	0xA1A9
-#define	reg_acif_en_pos 0
-#define	reg_acif_en_len 1
-#define	reg_acif_en_lsb 0
-#define xd_p_reg_acif_dis	0xA1A9
-#define	reg_acif_dis_pos 1
-#define	reg_acif_dis_len 1
-#define	reg_acif_dis_lsb 0
-#define xd_p_reg_acif_rst	0xA1A9
-#define	reg_acif_rst_pos 2
-#define	reg_acif_rst_len 1
-#define	reg_acif_rst_lsb 0
-#define xd_p_reg_acif_byp	0xA1A9
-#define	reg_acif_byp_pos 3
-#define	reg_acif_byp_len 1
-#define	reg_acif_byp_lsb 0
-#define xd_p_reg_acif_sync_mode	0xA1A9
-#define	reg_acif_sync_mode_pos 4
-#define	reg_acif_sync_mode_len 1
-#define	reg_acif_sync_mode_lsb 0
-#define xd_p_dagc2_rst	0xA1AA
-#define	dagc2_rst_pos 0
-#define	dagc2_rst_len 1
-#define	dagc2_rst_lsb 0
-#define xd_p_dagc2_en	0xA1AA
-#define	dagc2_en_pos 1
-#define	dagc2_en_len 1
-#define	dagc2_en_lsb 0
-#define xd_p_dagc2_mode	0xA1AA
-#define	dagc2_mode_pos 2
-#define	dagc2_mode_len 2
-#define	dagc2_mode_lsb 0
-#define xd_p_dagc2_done	0xA1AA
-#define	dagc2_done_pos 4
-#define	dagc2_done_len 1
-#define	dagc2_done_lsb 0
-#define xd_p_reg_dca_en	0xA1AB
-#define	reg_dca_en_pos 0
-#define	reg_dca_en_len 1
-#define	reg_dca_en_lsb 0
-#define xd_p_dagc2_accumulate_num_2k_7_0	0xA1C0
-#define	dagc2_accumulate_num_2k_7_0_pos 0
-#define	dagc2_accumulate_num_2k_7_0_len 8
-#define	dagc2_accumulate_num_2k_7_0_lsb 0
-#define xd_p_dagc2_accumulate_num_2k_12_8	0xA1C1
-#define	dagc2_accumulate_num_2k_12_8_pos 0
-#define	dagc2_accumulate_num_2k_12_8_len 5
-#define	dagc2_accumulate_num_2k_12_8_lsb 8
-#define xd_p_dagc2_accumulate_num_8k_7_0	0xA1C2
-#define	dagc2_accumulate_num_8k_7_0_pos 0
-#define	dagc2_accumulate_num_8k_7_0_len 8
-#define	dagc2_accumulate_num_8k_7_0_lsb 0
-#define xd_p_dagc2_accumulate_num_8k_12_8	0xA1C3
-#define	dagc2_accumulate_num_8k_12_8_pos 0
-#define	dagc2_accumulate_num_8k_12_8_len 5
-#define	dagc2_accumulate_num_8k_12_8_lsb 8
-#define xd_p_dagc2_desired_level_2_0	0xA1C3
-#define	dagc2_desired_level_2_0_pos 5
-#define	dagc2_desired_level_2_0_len 3
-#define	dagc2_desired_level_2_0_lsb 0
-#define xd_p_dagc2_desired_level_8_3	0xA1C4
-#define	dagc2_desired_level_8_3_pos 0
-#define	dagc2_desired_level_8_3_len 6
-#define	dagc2_desired_level_8_3_lsb 3
-#define xd_p_dagc2_apply_delay	0xA1C5
-#define	dagc2_apply_delay_pos 0
-#define	dagc2_apply_delay_len 7
-#define	dagc2_apply_delay_lsb 0
-#define xd_p_dagc2_bypass_scale_ctl	0xA1C6
-#define	dagc2_bypass_scale_ctl_pos 0
-#define	dagc2_bypass_scale_ctl_len 3
-#define	dagc2_bypass_scale_ctl_lsb 0
-#define xd_p_dagc2_programmable_shift1	0xA1C7
-#define	dagc2_programmable_shift1_pos 0
-#define	dagc2_programmable_shift1_len 8
-#define	dagc2_programmable_shift1_lsb 0
-#define xd_p_dagc2_programmable_shift2	0xA1C8
-#define	dagc2_programmable_shift2_pos 0
-#define	dagc2_programmable_shift2_len 8
-#define	dagc2_programmable_shift2_lsb 0
-#define xd_p_reg_dagc2_in_sat_cnt_7_0	0xA1C9
-#define	reg_dagc2_in_sat_cnt_7_0_pos 0
-#define	reg_dagc2_in_sat_cnt_7_0_len 8
-#define	reg_dagc2_in_sat_cnt_7_0_lsb 0
-#define xd_p_reg_dagc2_in_sat_cnt_15_8	0xA1CA
-#define	reg_dagc2_in_sat_cnt_15_8_pos 0
-#define	reg_dagc2_in_sat_cnt_15_8_len 8
-#define	reg_dagc2_in_sat_cnt_15_8_lsb 8
-#define xd_p_reg_dagc2_in_sat_cnt_23_16	0xA1CB
-#define	reg_dagc2_in_sat_cnt_23_16_pos 0
-#define	reg_dagc2_in_sat_cnt_23_16_len 8
-#define	reg_dagc2_in_sat_cnt_23_16_lsb 16
-#define xd_p_reg_dagc2_in_sat_cnt_31_24	0xA1CC
-#define	reg_dagc2_in_sat_cnt_31_24_pos 0
-#define	reg_dagc2_in_sat_cnt_31_24_len 8
-#define	reg_dagc2_in_sat_cnt_31_24_lsb 24
-#define xd_p_reg_dagc2_out_sat_cnt_7_0	0xA1CD
-#define	reg_dagc2_out_sat_cnt_7_0_pos 0
-#define	reg_dagc2_out_sat_cnt_7_0_len 8
-#define	reg_dagc2_out_sat_cnt_7_0_lsb 0
-#define xd_p_reg_dagc2_out_sat_cnt_15_8	0xA1CE
-#define	reg_dagc2_out_sat_cnt_15_8_pos 0
-#define	reg_dagc2_out_sat_cnt_15_8_len 8
-#define	reg_dagc2_out_sat_cnt_15_8_lsb 8
-#define xd_p_reg_dagc2_out_sat_cnt_23_16	0xA1CF
-#define	reg_dagc2_out_sat_cnt_23_16_pos 0
-#define	reg_dagc2_out_sat_cnt_23_16_len 8
-#define	reg_dagc2_out_sat_cnt_23_16_lsb 16
-#define xd_p_reg_dagc2_out_sat_cnt_31_24	0xA1D0
-#define	reg_dagc2_out_sat_cnt_31_24_pos 0
-#define	reg_dagc2_out_sat_cnt_31_24_len 8
-#define	reg_dagc2_out_sat_cnt_31_24_lsb 24
-#define xd_r_dagc2_multiplier_7_0	0xA1D6
-#define	dagc2_multiplier_7_0_pos 0
-#define	dagc2_multiplier_7_0_len 8
-#define	dagc2_multiplier_7_0_lsb 0
-#define xd_r_dagc2_multiplier_15_8	0xA1D7
-#define	dagc2_multiplier_15_8_pos 0
-#define	dagc2_multiplier_15_8_len 8
-#define	dagc2_multiplier_15_8_lsb 8
-#define xd_r_dagc2_right_shift_bits	0xA1D8
-#define	dagc2_right_shift_bits_pos 0
-#define	dagc2_right_shift_bits_len 4
-#define	dagc2_right_shift_bits_lsb 0
-#define xd_p_cfoe_NS_coeff1_7_0	0xA200
-#define	cfoe_NS_coeff1_7_0_pos 0
-#define	cfoe_NS_coeff1_7_0_len 8
-#define	cfoe_NS_coeff1_7_0_lsb 0
-#define xd_p_cfoe_NS_coeff1_15_8	0xA201
-#define	cfoe_NS_coeff1_15_8_pos 0
-#define	cfoe_NS_coeff1_15_8_len 8
-#define	cfoe_NS_coeff1_15_8_lsb 8
-#define xd_p_cfoe_NS_coeff1_23_16	0xA202
-#define	cfoe_NS_coeff1_23_16_pos 0
-#define	cfoe_NS_coeff1_23_16_len 8
-#define	cfoe_NS_coeff1_23_16_lsb 16
-#define xd_p_cfoe_NS_coeff1_25_24	0xA203
-#define	cfoe_NS_coeff1_25_24_pos 0
-#define	cfoe_NS_coeff1_25_24_len 2
-#define	cfoe_NS_coeff1_25_24_lsb 24
-#define xd_p_cfoe_NS_coeff2_5_0	0xA203
-#define	cfoe_NS_coeff2_5_0_pos 2
-#define	cfoe_NS_coeff2_5_0_len 6
-#define	cfoe_NS_coeff2_5_0_lsb 0
-#define xd_p_cfoe_NS_coeff2_13_6	0xA204
-#define	cfoe_NS_coeff2_13_6_pos 0
-#define	cfoe_NS_coeff2_13_6_len 8
-#define	cfoe_NS_coeff2_13_6_lsb 6
-#define xd_p_cfoe_NS_coeff2_21_14	0xA205
-#define	cfoe_NS_coeff2_21_14_pos 0
-#define	cfoe_NS_coeff2_21_14_len 8
-#define	cfoe_NS_coeff2_21_14_lsb 14
-#define xd_p_cfoe_NS_coeff2_24_22	0xA206
-#define	cfoe_NS_coeff2_24_22_pos 0
-#define	cfoe_NS_coeff2_24_22_len 3
-#define	cfoe_NS_coeff2_24_22_lsb 22
-#define xd_p_cfoe_lf_c1_4_0	0xA206
-#define	cfoe_lf_c1_4_0_pos 3
-#define	cfoe_lf_c1_4_0_len 5
-#define	cfoe_lf_c1_4_0_lsb 0
-#define xd_p_cfoe_lf_c1_12_5	0xA207
-#define	cfoe_lf_c1_12_5_pos 0
-#define	cfoe_lf_c1_12_5_len 8
-#define	cfoe_lf_c1_12_5_lsb 5
-#define xd_p_cfoe_lf_c1_20_13	0xA208
-#define	cfoe_lf_c1_20_13_pos 0
-#define	cfoe_lf_c1_20_13_len 8
-#define	cfoe_lf_c1_20_13_lsb 13
-#define xd_p_cfoe_lf_c1_25_21	0xA209
-#define	cfoe_lf_c1_25_21_pos 0
-#define	cfoe_lf_c1_25_21_len 5
-#define	cfoe_lf_c1_25_21_lsb 21
-#define xd_p_cfoe_lf_c2_2_0	0xA209
-#define	cfoe_lf_c2_2_0_pos 5
-#define	cfoe_lf_c2_2_0_len 3
-#define	cfoe_lf_c2_2_0_lsb 0
-#define xd_p_cfoe_lf_c2_10_3	0xA20A
-#define	cfoe_lf_c2_10_3_pos 0
-#define	cfoe_lf_c2_10_3_len 8
-#define	cfoe_lf_c2_10_3_lsb 3
-#define xd_p_cfoe_lf_c2_18_11	0xA20B
-#define	cfoe_lf_c2_18_11_pos 0
-#define	cfoe_lf_c2_18_11_len 8
-#define	cfoe_lf_c2_18_11_lsb 11
-#define xd_p_cfoe_lf_c2_25_19	0xA20C
-#define	cfoe_lf_c2_25_19_pos 0
-#define	cfoe_lf_c2_25_19_len 7
-#define	cfoe_lf_c2_25_19_lsb 19
-#define xd_p_cfoe_ifod_7_0	0xA20D
-#define	cfoe_ifod_7_0_pos 0
-#define	cfoe_ifod_7_0_len 8
-#define	cfoe_ifod_7_0_lsb 0
-#define xd_p_cfoe_ifod_10_8	0xA20E
-#define	cfoe_ifod_10_8_pos 0
-#define	cfoe_ifod_10_8_len 3
-#define	cfoe_ifod_10_8_lsb 8
-#define xd_p_cfoe_Divg_ctr_th	0xA20E
-#define	cfoe_Divg_ctr_th_pos 4
-#define	cfoe_Divg_ctr_th_len 4
-#define	cfoe_Divg_ctr_th_lsb 0
-#define xd_p_cfoe_FOT_divg_th	0xA20F
-#define	cfoe_FOT_divg_th_pos 0
-#define	cfoe_FOT_divg_th_len 8
-#define	cfoe_FOT_divg_th_lsb 0
-#define xd_p_cfoe_FOT_cnvg_th	0xA210
-#define	cfoe_FOT_cnvg_th_pos 0
-#define	cfoe_FOT_cnvg_th_len 8
-#define	cfoe_FOT_cnvg_th_lsb 0
-#define xd_p_reg_cfoe_offset_7_0	0xA211
-#define	reg_cfoe_offset_7_0_pos 0
-#define	reg_cfoe_offset_7_0_len 8
-#define	reg_cfoe_offset_7_0_lsb 0
-#define xd_p_reg_cfoe_offset_9_8	0xA212
-#define	reg_cfoe_offset_9_8_pos 0
-#define	reg_cfoe_offset_9_8_len 2
-#define	reg_cfoe_offset_9_8_lsb 8
-#define xd_p_reg_cfoe_ifoe_sign_corr	0xA212
-#define	reg_cfoe_ifoe_sign_corr_pos 2
-#define	reg_cfoe_ifoe_sign_corr_len 1
-#define	reg_cfoe_ifoe_sign_corr_lsb 0
-#define xd_r_cfoe_fot_LF_output_7_0	0xA218
-#define	cfoe_fot_LF_output_7_0_pos 0
-#define	cfoe_fot_LF_output_7_0_len 8
-#define	cfoe_fot_LF_output_7_0_lsb 0
-#define xd_r_cfoe_fot_LF_output_15_8	0xA219
-#define	cfoe_fot_LF_output_15_8_pos 0
-#define	cfoe_fot_LF_output_15_8_len 8
-#define	cfoe_fot_LF_output_15_8_lsb 8
-#define xd_r_cfoe_ifo_metric_7_0	0xA21A
-#define	cfoe_ifo_metric_7_0_pos 0
-#define	cfoe_ifo_metric_7_0_len 8
-#define	cfoe_ifo_metric_7_0_lsb 0
-#define xd_r_cfoe_ifo_metric_15_8	0xA21B
-#define	cfoe_ifo_metric_15_8_pos 0
-#define	cfoe_ifo_metric_15_8_len 8
-#define	cfoe_ifo_metric_15_8_lsb 8
-#define xd_r_cfoe_ifo_metric_23_16	0xA21C
-#define	cfoe_ifo_metric_23_16_pos 0
-#define	cfoe_ifo_metric_23_16_len 8
-#define	cfoe_ifo_metric_23_16_lsb 16
-#define xd_p_ste_Nu	0xA220
-#define	ste_Nu_pos 0
-#define	ste_Nu_len 2
-#define	ste_Nu_lsb 0
-#define xd_p_ste_GI	0xA220
-#define	ste_GI_pos 2
-#define	ste_GI_len 3
-#define	ste_GI_lsb 0
-#define xd_p_ste_symbol_num	0xA221
-#define	ste_symbol_num_pos 0
-#define	ste_symbol_num_len 2
-#define	ste_symbol_num_lsb 0
-#define xd_p_ste_sample_num	0xA221
-#define	ste_sample_num_pos 2
-#define	ste_sample_num_len 2
-#define	ste_sample_num_lsb 0
-#define xd_p_reg_ste_buf_en	0xA221
-#define	reg_ste_buf_en_pos 7
-#define	reg_ste_buf_en_len 1
-#define	reg_ste_buf_en_lsb 0
-#define xd_p_ste_FFT_offset_7_0	0xA222
-#define	ste_FFT_offset_7_0_pos 0
-#define	ste_FFT_offset_7_0_len 8
-#define	ste_FFT_offset_7_0_lsb 0
-#define xd_p_ste_FFT_offset_11_8	0xA223
-#define	ste_FFT_offset_11_8_pos 0
-#define	ste_FFT_offset_11_8_len 4
-#define	ste_FFT_offset_11_8_lsb 8
-#define xd_p_reg_ste_tstmod	0xA223
-#define	reg_ste_tstmod_pos 5
-#define	reg_ste_tstmod_len 1
-#define	reg_ste_tstmod_lsb 0
-#define xd_p_ste_adv_start_7_0	0xA224
-#define	ste_adv_start_7_0_pos 0
-#define	ste_adv_start_7_0_len 8
-#define	ste_adv_start_7_0_lsb 0
-#define xd_p_ste_adv_start_10_8	0xA225
-#define	ste_adv_start_10_8_pos 0
-#define	ste_adv_start_10_8_len 3
-#define	ste_adv_start_10_8_lsb 8
-#define xd_p_ste_adv_stop	0xA226
-#define	ste_adv_stop_pos 0
-#define	ste_adv_stop_len 8
-#define	ste_adv_stop_lsb 0
-#define xd_r_ste_P_value_7_0	0xA228
-#define	ste_P_value_7_0_pos 0
-#define	ste_P_value_7_0_len 8
-#define	ste_P_value_7_0_lsb 0
-#define xd_r_ste_P_value_10_8	0xA229
-#define	ste_P_value_10_8_pos 0
-#define	ste_P_value_10_8_len 3
-#define	ste_P_value_10_8_lsb 8
-#define xd_r_ste_M_value_7_0	0xA22A
-#define	ste_M_value_7_0_pos 0
-#define	ste_M_value_7_0_len 8
-#define	ste_M_value_7_0_lsb 0
-#define xd_r_ste_M_value_10_8	0xA22B
-#define	ste_M_value_10_8_pos 0
-#define	ste_M_value_10_8_len 3
-#define	ste_M_value_10_8_lsb 8
-#define xd_r_ste_H1	0xA22C
-#define	ste_H1_pos 0
-#define	ste_H1_len 7
-#define	ste_H1_lsb 0
-#define xd_r_ste_H2	0xA22D
-#define	ste_H2_pos 0
-#define	ste_H2_len 7
-#define	ste_H2_lsb 0
-#define xd_r_ste_H3	0xA22E
-#define	ste_H3_pos 0
-#define	ste_H3_len 7
-#define	ste_H3_lsb 0
-#define xd_r_ste_H4	0xA22F
-#define	ste_H4_pos 0
-#define	ste_H4_len 7
-#define	ste_H4_lsb 0
-#define xd_r_ste_Corr_value_I_7_0	0xA230
-#define	ste_Corr_value_I_7_0_pos 0
-#define	ste_Corr_value_I_7_0_len 8
-#define	ste_Corr_value_I_7_0_lsb 0
-#define xd_r_ste_Corr_value_I_15_8	0xA231
-#define	ste_Corr_value_I_15_8_pos 0
-#define	ste_Corr_value_I_15_8_len 8
-#define	ste_Corr_value_I_15_8_lsb 8
-#define xd_r_ste_Corr_value_I_23_16	0xA232
-#define	ste_Corr_value_I_23_16_pos 0
-#define	ste_Corr_value_I_23_16_len 8
-#define	ste_Corr_value_I_23_16_lsb 16
-#define xd_r_ste_Corr_value_I_27_24	0xA233
-#define	ste_Corr_value_I_27_24_pos 0
-#define	ste_Corr_value_I_27_24_len 4
-#define	ste_Corr_value_I_27_24_lsb 24
-#define xd_r_ste_Corr_value_Q_7_0	0xA234
-#define	ste_Corr_value_Q_7_0_pos 0
-#define	ste_Corr_value_Q_7_0_len 8
-#define	ste_Corr_value_Q_7_0_lsb 0
-#define xd_r_ste_Corr_value_Q_15_8	0xA235
-#define	ste_Corr_value_Q_15_8_pos 0
-#define	ste_Corr_value_Q_15_8_len 8
-#define	ste_Corr_value_Q_15_8_lsb 8
-#define xd_r_ste_Corr_value_Q_23_16	0xA236
-#define	ste_Corr_value_Q_23_16_pos 0
-#define	ste_Corr_value_Q_23_16_len 8
-#define	ste_Corr_value_Q_23_16_lsb 16
-#define xd_r_ste_Corr_value_Q_27_24	0xA237
-#define	ste_Corr_value_Q_27_24_pos 0
-#define	ste_Corr_value_Q_27_24_len 4
-#define	ste_Corr_value_Q_27_24_lsb 24
-#define xd_r_ste_J_num_7_0	0xA238
-#define	ste_J_num_7_0_pos 0
-#define	ste_J_num_7_0_len 8
-#define	ste_J_num_7_0_lsb 0
-#define xd_r_ste_J_num_15_8	0xA239
-#define	ste_J_num_15_8_pos 0
-#define	ste_J_num_15_8_len 8
-#define	ste_J_num_15_8_lsb 8
-#define xd_r_ste_J_num_23_16	0xA23A
-#define	ste_J_num_23_16_pos 0
-#define	ste_J_num_23_16_len 8
-#define	ste_J_num_23_16_lsb 16
-#define xd_r_ste_J_num_31_24	0xA23B
-#define	ste_J_num_31_24_pos 0
-#define	ste_J_num_31_24_len 8
-#define	ste_J_num_31_24_lsb 24
-#define xd_r_ste_J_den_7_0	0xA23C
-#define	ste_J_den_7_0_pos 0
-#define	ste_J_den_7_0_len 8
-#define	ste_J_den_7_0_lsb 0
-#define xd_r_ste_J_den_15_8	0xA23D
-#define	ste_J_den_15_8_pos 0
-#define	ste_J_den_15_8_len 8
-#define	ste_J_den_15_8_lsb 8
-#define xd_r_ste_J_den_18_16	0xA23E
-#define	ste_J_den_18_16_pos 0
-#define	ste_J_den_18_16_len 3
-#define	ste_J_den_18_16_lsb 16
-#define xd_r_ste_Beacon_Indicator	0xA23E
-#define	ste_Beacon_Indicator_pos 4
-#define	ste_Beacon_Indicator_len 1
-#define	ste_Beacon_Indicator_lsb 0
-#define xd_r_tpsd_Frame_Num	0xA250
-#define	tpsd_Frame_Num_pos 0
-#define	tpsd_Frame_Num_len 2
-#define	tpsd_Frame_Num_lsb 0
-#define xd_r_tpsd_Constel	0xA250
-#define	tpsd_Constel_pos 2
-#define	tpsd_Constel_len 2
-#define	tpsd_Constel_lsb 0
-#define xd_r_tpsd_GI	0xA250
-#define	tpsd_GI_pos 4
-#define	tpsd_GI_len 2
-#define	tpsd_GI_lsb 0
-#define xd_r_tpsd_Mode	0xA250
-#define	tpsd_Mode_pos 6
-#define	tpsd_Mode_len 2
-#define	tpsd_Mode_lsb 0
-#define xd_r_tpsd_CR_HP	0xA251
-#define	tpsd_CR_HP_pos 0
-#define	tpsd_CR_HP_len 3
-#define	tpsd_CR_HP_lsb 0
-#define xd_r_tpsd_CR_LP	0xA251
-#define	tpsd_CR_LP_pos 3
-#define	tpsd_CR_LP_len 3
-#define	tpsd_CR_LP_lsb 0
-#define xd_r_tpsd_Hie	0xA252
-#define	tpsd_Hie_pos 0
-#define	tpsd_Hie_len 3
-#define	tpsd_Hie_lsb 0
-#define xd_r_tpsd_Res_Bits	0xA252
-#define	tpsd_Res_Bits_pos 3
-#define	tpsd_Res_Bits_len 5
-#define	tpsd_Res_Bits_lsb 0
-#define xd_r_tpsd_Res_Bits_0	0xA253
-#define	tpsd_Res_Bits_0_pos 0
-#define	tpsd_Res_Bits_0_len 1
-#define	tpsd_Res_Bits_0_lsb 0
-#define xd_r_tpsd_LengthInd	0xA253
-#define	tpsd_LengthInd_pos 1
-#define	tpsd_LengthInd_len 6
-#define	tpsd_LengthInd_lsb 0
-#define xd_r_tpsd_Cell_Id_7_0	0xA254
-#define	tpsd_Cell_Id_7_0_pos 0
-#define	tpsd_Cell_Id_7_0_len 8
-#define	tpsd_Cell_Id_7_0_lsb 0
-#define xd_r_tpsd_Cell_Id_15_8	0xA255
-#define	tpsd_Cell_Id_15_8_pos 0
-#define	tpsd_Cell_Id_15_8_len 8
-#define	tpsd_Cell_Id_15_8_lsb 0
-#define xd_p_reg_fft_mask_tone0_7_0	0xA260
-#define	reg_fft_mask_tone0_7_0_pos 0
-#define	reg_fft_mask_tone0_7_0_len 8
-#define	reg_fft_mask_tone0_7_0_lsb 0
-#define xd_p_reg_fft_mask_tone0_12_8	0xA261
-#define	reg_fft_mask_tone0_12_8_pos 0
-#define	reg_fft_mask_tone0_12_8_len 5
-#define	reg_fft_mask_tone0_12_8_lsb 8
-#define xd_p_reg_fft_mask_tone1_7_0	0xA262
-#define	reg_fft_mask_tone1_7_0_pos 0
-#define	reg_fft_mask_tone1_7_0_len 8
-#define	reg_fft_mask_tone1_7_0_lsb 0
-#define xd_p_reg_fft_mask_tone1_12_8	0xA263
-#define	reg_fft_mask_tone1_12_8_pos 0
-#define	reg_fft_mask_tone1_12_8_len 5
-#define	reg_fft_mask_tone1_12_8_lsb 8
-#define xd_p_reg_fft_mask_tone2_7_0	0xA264
-#define	reg_fft_mask_tone2_7_0_pos 0
-#define	reg_fft_mask_tone2_7_0_len 8
-#define	reg_fft_mask_tone2_7_0_lsb 0
-#define xd_p_reg_fft_mask_tone2_12_8	0xA265
-#define	reg_fft_mask_tone2_12_8_pos 0
-#define	reg_fft_mask_tone2_12_8_len 5
-#define	reg_fft_mask_tone2_12_8_lsb 8
-#define xd_p_reg_fft_mask_tone3_7_0	0xA266
-#define	reg_fft_mask_tone3_7_0_pos 0
-#define	reg_fft_mask_tone3_7_0_len 8
-#define	reg_fft_mask_tone3_7_0_lsb 0
-#define xd_p_reg_fft_mask_tone3_12_8	0xA267
-#define	reg_fft_mask_tone3_12_8_pos 0
-#define	reg_fft_mask_tone3_12_8_len 5
-#define	reg_fft_mask_tone3_12_8_lsb 8
-#define xd_p_reg_fft_mask_from0_7_0	0xA268
-#define	reg_fft_mask_from0_7_0_pos 0
-#define	reg_fft_mask_from0_7_0_len 8
-#define	reg_fft_mask_from0_7_0_lsb 0
-#define xd_p_reg_fft_mask_from0_12_8	0xA269
-#define	reg_fft_mask_from0_12_8_pos 0
-#define	reg_fft_mask_from0_12_8_len 5
-#define	reg_fft_mask_from0_12_8_lsb 8
-#define xd_p_reg_fft_mask_to0_7_0	0xA26A
-#define	reg_fft_mask_to0_7_0_pos 0
-#define	reg_fft_mask_to0_7_0_len 8
-#define	reg_fft_mask_to0_7_0_lsb 0
-#define xd_p_reg_fft_mask_to0_12_8	0xA26B
-#define	reg_fft_mask_to0_12_8_pos 0
-#define	reg_fft_mask_to0_12_8_len 5
-#define	reg_fft_mask_to0_12_8_lsb 8
-#define xd_p_reg_fft_mask_from1_7_0	0xA26C
-#define	reg_fft_mask_from1_7_0_pos 0
-#define	reg_fft_mask_from1_7_0_len 8
-#define	reg_fft_mask_from1_7_0_lsb 0
-#define xd_p_reg_fft_mask_from1_12_8	0xA26D
-#define	reg_fft_mask_from1_12_8_pos 0
-#define	reg_fft_mask_from1_12_8_len 5
-#define	reg_fft_mask_from1_12_8_lsb 8
-#define xd_p_reg_fft_mask_to1_7_0	0xA26E
-#define	reg_fft_mask_to1_7_0_pos 0
-#define	reg_fft_mask_to1_7_0_len 8
-#define	reg_fft_mask_to1_7_0_lsb 0
-#define xd_p_reg_fft_mask_to1_12_8	0xA26F
-#define	reg_fft_mask_to1_12_8_pos 0
-#define	reg_fft_mask_to1_12_8_len 5
-#define	reg_fft_mask_to1_12_8_lsb 8
-#define xd_p_reg_cge_idx0_7_0	0xA280
-#define	reg_cge_idx0_7_0_pos 0
-#define	reg_cge_idx0_7_0_len 8
-#define	reg_cge_idx0_7_0_lsb 0
-#define xd_p_reg_cge_idx0_12_8	0xA281
-#define	reg_cge_idx0_12_8_pos 0
-#define	reg_cge_idx0_12_8_len 5
-#define	reg_cge_idx0_12_8_lsb 8
-#define xd_p_reg_cge_idx1_7_0	0xA282
-#define	reg_cge_idx1_7_0_pos 0
-#define	reg_cge_idx1_7_0_len 8
-#define	reg_cge_idx1_7_0_lsb 0
-#define xd_p_reg_cge_idx1_12_8	0xA283
-#define	reg_cge_idx1_12_8_pos 0
-#define	reg_cge_idx1_12_8_len 5
-#define	reg_cge_idx1_12_8_lsb 8
-#define xd_p_reg_cge_idx2_7_0	0xA284
-#define	reg_cge_idx2_7_0_pos 0
-#define	reg_cge_idx2_7_0_len 8
-#define	reg_cge_idx2_7_0_lsb 0
-#define xd_p_reg_cge_idx2_12_8	0xA285
-#define	reg_cge_idx2_12_8_pos 0
-#define	reg_cge_idx2_12_8_len 5
-#define	reg_cge_idx2_12_8_lsb 8
-#define xd_p_reg_cge_idx3_7_0	0xA286
-#define	reg_cge_idx3_7_0_pos 0
-#define	reg_cge_idx3_7_0_len 8
-#define	reg_cge_idx3_7_0_lsb 0
-#define xd_p_reg_cge_idx3_12_8	0xA287
-#define	reg_cge_idx3_12_8_pos 0
-#define	reg_cge_idx3_12_8_len 5
-#define	reg_cge_idx3_12_8_lsb 8
-#define xd_p_reg_cge_idx4_7_0	0xA288
-#define	reg_cge_idx4_7_0_pos 0
-#define	reg_cge_idx4_7_0_len 8
-#define	reg_cge_idx4_7_0_lsb 0
-#define xd_p_reg_cge_idx4_12_8	0xA289
-#define	reg_cge_idx4_12_8_pos 0
-#define	reg_cge_idx4_12_8_len 5
-#define	reg_cge_idx4_12_8_lsb 8
-#define xd_p_reg_cge_idx5_7_0	0xA28A
-#define	reg_cge_idx5_7_0_pos 0
-#define	reg_cge_idx5_7_0_len 8
-#define	reg_cge_idx5_7_0_lsb 0
-#define xd_p_reg_cge_idx5_12_8	0xA28B
-#define	reg_cge_idx5_12_8_pos 0
-#define	reg_cge_idx5_12_8_len 5
-#define	reg_cge_idx5_12_8_lsb 8
-#define xd_p_reg_cge_idx6_7_0	0xA28C
-#define	reg_cge_idx6_7_0_pos 0
-#define	reg_cge_idx6_7_0_len 8
-#define	reg_cge_idx6_7_0_lsb 0
-#define xd_p_reg_cge_idx6_12_8	0xA28D
-#define	reg_cge_idx6_12_8_pos 0
-#define	reg_cge_idx6_12_8_len 5
-#define	reg_cge_idx6_12_8_lsb 8
-#define xd_p_reg_cge_idx7_7_0	0xA28E
-#define	reg_cge_idx7_7_0_pos 0
-#define	reg_cge_idx7_7_0_len 8
-#define	reg_cge_idx7_7_0_lsb 0
-#define xd_p_reg_cge_idx7_12_8	0xA28F
-#define	reg_cge_idx7_12_8_pos 0
-#define	reg_cge_idx7_12_8_len 5
-#define	reg_cge_idx7_12_8_lsb 8
-#define xd_p_reg_cge_idx8_7_0	0xA290
-#define	reg_cge_idx8_7_0_pos 0
-#define	reg_cge_idx8_7_0_len 8
-#define	reg_cge_idx8_7_0_lsb 0
-#define xd_p_reg_cge_idx8_12_8	0xA291
-#define	reg_cge_idx8_12_8_pos 0
-#define	reg_cge_idx8_12_8_len 5
-#define	reg_cge_idx8_12_8_lsb 8
-#define xd_p_reg_cge_idx9_7_0	0xA292
-#define	reg_cge_idx9_7_0_pos 0
-#define	reg_cge_idx9_7_0_len 8
-#define	reg_cge_idx9_7_0_lsb 0
-#define xd_p_reg_cge_idx9_12_8	0xA293
-#define	reg_cge_idx9_12_8_pos 0
-#define	reg_cge_idx9_12_8_len 5
-#define	reg_cge_idx9_12_8_lsb 8
-#define xd_p_reg_cge_idx10_7_0	0xA294
-#define	reg_cge_idx10_7_0_pos 0
-#define	reg_cge_idx10_7_0_len 8
-#define	reg_cge_idx10_7_0_lsb 0
-#define xd_p_reg_cge_idx10_12_8	0xA295
-#define	reg_cge_idx10_12_8_pos 0
-#define	reg_cge_idx10_12_8_len 5
-#define	reg_cge_idx10_12_8_lsb 8
-#define xd_p_reg_cge_idx11_7_0	0xA296
-#define	reg_cge_idx11_7_0_pos 0
-#define	reg_cge_idx11_7_0_len 8
-#define	reg_cge_idx11_7_0_lsb 0
-#define xd_p_reg_cge_idx11_12_8	0xA297
-#define	reg_cge_idx11_12_8_pos 0
-#define	reg_cge_idx11_12_8_len 5
-#define	reg_cge_idx11_12_8_lsb 8
-#define xd_p_reg_cge_idx12_7_0	0xA298
-#define	reg_cge_idx12_7_0_pos 0
-#define	reg_cge_idx12_7_0_len 8
-#define	reg_cge_idx12_7_0_lsb 0
-#define xd_p_reg_cge_idx12_12_8	0xA299
-#define	reg_cge_idx12_12_8_pos 0
-#define	reg_cge_idx12_12_8_len 5
-#define	reg_cge_idx12_12_8_lsb 8
-#define xd_p_reg_cge_idx13_7_0	0xA29A
-#define	reg_cge_idx13_7_0_pos 0
-#define	reg_cge_idx13_7_0_len 8
-#define	reg_cge_idx13_7_0_lsb 0
-#define xd_p_reg_cge_idx13_12_8	0xA29B
-#define	reg_cge_idx13_12_8_pos 0
-#define	reg_cge_idx13_12_8_len 5
-#define	reg_cge_idx13_12_8_lsb 8
-#define xd_p_reg_cge_idx14_7_0	0xA29C
-#define	reg_cge_idx14_7_0_pos 0
-#define	reg_cge_idx14_7_0_len 8
-#define	reg_cge_idx14_7_0_lsb 0
-#define xd_p_reg_cge_idx14_12_8	0xA29D
-#define	reg_cge_idx14_12_8_pos 0
-#define	reg_cge_idx14_12_8_len 5
-#define	reg_cge_idx14_12_8_lsb 8
-#define xd_p_reg_cge_idx15_7_0	0xA29E
-#define	reg_cge_idx15_7_0_pos 0
-#define	reg_cge_idx15_7_0_len 8
-#define	reg_cge_idx15_7_0_lsb 0
-#define xd_p_reg_cge_idx15_12_8	0xA29F
-#define	reg_cge_idx15_12_8_pos 0
-#define	reg_cge_idx15_12_8_len 5
-#define	reg_cge_idx15_12_8_lsb 8
-#define xd_r_reg_fft_crc	0xA2A8
-#define	reg_fft_crc_pos 0
-#define	reg_fft_crc_len 8
-#define	reg_fft_crc_lsb 0
-#define xd_p_fd_fft_shift_max	0xA2A9
-#define	fd_fft_shift_max_pos 0
-#define	fd_fft_shift_max_len 4
-#define	fd_fft_shift_max_lsb 0
-#define xd_r_fd_fft_shift	0xA2A9
-#define	fd_fft_shift_pos 4
-#define	fd_fft_shift_len 4
-#define	fd_fft_shift_lsb 0
-#define xd_r_fd_fft_frame_num	0xA2AA
-#define	fd_fft_frame_num_pos 0
-#define	fd_fft_frame_num_len 2
-#define	fd_fft_frame_num_lsb 0
-#define xd_r_fd_fft_symbol_count	0xA2AB
-#define	fd_fft_symbol_count_pos 0
-#define	fd_fft_symbol_count_len 7
-#define	fd_fft_symbol_count_lsb 0
-#define xd_r_reg_fft_idx_max_7_0	0xA2AC
-#define	reg_fft_idx_max_7_0_pos 0
-#define	reg_fft_idx_max_7_0_len 8
-#define	reg_fft_idx_max_7_0_lsb 0
-#define xd_r_reg_fft_idx_max_12_8	0xA2AD
-#define	reg_fft_idx_max_12_8_pos 0
-#define	reg_fft_idx_max_12_8_len 5
-#define	reg_fft_idx_max_12_8_lsb 8
-#define xd_p_reg_cge_program	0xA2AE
-#define	reg_cge_program_pos 0
-#define	reg_cge_program_len 1
-#define	reg_cge_program_lsb 0
-#define xd_p_reg_cge_fixed	0xA2AE
-#define	reg_cge_fixed_pos 1
-#define	reg_cge_fixed_len 1
-#define	reg_cge_fixed_lsb 0
-#define xd_p_reg_fft_rotate_en	0xA2AE
-#define	reg_fft_rotate_en_pos 2
-#define	reg_fft_rotate_en_len 1
-#define	reg_fft_rotate_en_lsb 0
-#define xd_p_reg_fft_rotate_base_4_0	0xA2AE
-#define	reg_fft_rotate_base_4_0_pos 3
-#define	reg_fft_rotate_base_4_0_len 5
-#define	reg_fft_rotate_base_4_0_lsb 0
-#define xd_p_reg_fft_rotate_base_12_5	0xA2AF
-#define	reg_fft_rotate_base_12_5_pos 0
-#define	reg_fft_rotate_base_12_5_len 8
-#define	reg_fft_rotate_base_12_5_lsb 5
-#define xd_p_reg_gp_trigger_fd	0xA2B8
-#define	reg_gp_trigger_fd_pos 0
-#define	reg_gp_trigger_fd_len 1
-#define	reg_gp_trigger_fd_lsb 0
-#define xd_p_reg_trigger_sel_fd	0xA2B8
-#define	reg_trigger_sel_fd_pos 1
-#define	reg_trigger_sel_fd_len 2
-#define	reg_trigger_sel_fd_lsb 0
-#define xd_p_reg_trigger_module_sel_fd	0xA2B9
-#define	reg_trigger_module_sel_fd_pos 0
-#define	reg_trigger_module_sel_fd_len 6
-#define	reg_trigger_module_sel_fd_lsb 0
-#define xd_p_reg_trigger_set_sel_fd	0xA2BA
-#define	reg_trigger_set_sel_fd_pos 0
-#define	reg_trigger_set_sel_fd_len 6
-#define	reg_trigger_set_sel_fd_lsb 0
-#define xd_p_reg_fd_noname_7_0	0xA2BC
-#define	reg_fd_noname_7_0_pos 0
-#define	reg_fd_noname_7_0_len 8
-#define	reg_fd_noname_7_0_lsb 0
-#define xd_p_reg_fd_noname_15_8	0xA2BD
-#define	reg_fd_noname_15_8_pos 0
-#define	reg_fd_noname_15_8_len 8
-#define	reg_fd_noname_15_8_lsb 8
-#define xd_p_reg_fd_noname_23_16	0xA2BE
-#define	reg_fd_noname_23_16_pos 0
-#define	reg_fd_noname_23_16_len 8
-#define	reg_fd_noname_23_16_lsb 16
-#define xd_p_reg_fd_noname_31_24	0xA2BF
-#define	reg_fd_noname_31_24_pos 0
-#define	reg_fd_noname_31_24_len 8
-#define	reg_fd_noname_31_24_lsb 24
-#define xd_r_fd_fpcc_cp_corr_signn	0xA2C0
-#define	fd_fpcc_cp_corr_signn_pos 0
-#define	fd_fpcc_cp_corr_signn_len 8
-#define	fd_fpcc_cp_corr_signn_lsb 0
-#define xd_p_reg_feq_s1	0xA2C1
-#define	reg_feq_s1_pos 0
-#define	reg_feq_s1_len 5
-#define	reg_feq_s1_lsb 0
-#define xd_p_fd_fpcc_cp_corr_tone_th	0xA2C2
-#define	fd_fpcc_cp_corr_tone_th_pos 0
-#define	fd_fpcc_cp_corr_tone_th_len 6
-#define	fd_fpcc_cp_corr_tone_th_lsb 0
-#define xd_p_fd_fpcc_cp_corr_symbol_log_th	0xA2C3
-#define	fd_fpcc_cp_corr_symbol_log_th_pos 0
-#define	fd_fpcc_cp_corr_symbol_log_th_len 4
-#define	fd_fpcc_cp_corr_symbol_log_th_lsb 0
-#define xd_p_fd_fpcc_cp_corr_int	0xA2C4
-#define	fd_fpcc_cp_corr_int_pos 0
-#define	fd_fpcc_cp_corr_int_len 1
-#define	fd_fpcc_cp_corr_int_lsb 0
-#define xd_p_reg_sfoe_ns_7_0	0xA320
-#define	reg_sfoe_ns_7_0_pos 0
-#define	reg_sfoe_ns_7_0_len 8
-#define	reg_sfoe_ns_7_0_lsb 0
-#define xd_p_reg_sfoe_ns_14_8	0xA321
-#define	reg_sfoe_ns_14_8_pos 0
-#define	reg_sfoe_ns_14_8_len 7
-#define	reg_sfoe_ns_14_8_lsb 8
-#define xd_p_reg_sfoe_c1_7_0	0xA322
-#define	reg_sfoe_c1_7_0_pos 0
-#define	reg_sfoe_c1_7_0_len 8
-#define	reg_sfoe_c1_7_0_lsb 0
-#define xd_p_reg_sfoe_c1_15_8	0xA323
-#define	reg_sfoe_c1_15_8_pos 0
-#define	reg_sfoe_c1_15_8_len 8
-#define	reg_sfoe_c1_15_8_lsb 8
-#define xd_p_reg_sfoe_c1_17_16	0xA324
-#define	reg_sfoe_c1_17_16_pos 0
-#define	reg_sfoe_c1_17_16_len 2
-#define	reg_sfoe_c1_17_16_lsb 16
-#define xd_p_reg_sfoe_c2_7_0	0xA325
-#define	reg_sfoe_c2_7_0_pos 0
-#define	reg_sfoe_c2_7_0_len 8
-#define	reg_sfoe_c2_7_0_lsb 0
-#define xd_p_reg_sfoe_c2_15_8	0xA326
-#define	reg_sfoe_c2_15_8_pos 0
-#define	reg_sfoe_c2_15_8_len 8
-#define	reg_sfoe_c2_15_8_lsb 8
-#define xd_p_reg_sfoe_c2_17_16	0xA327
-#define	reg_sfoe_c2_17_16_pos 0
-#define	reg_sfoe_c2_17_16_len 2
-#define	reg_sfoe_c2_17_16_lsb 16
-#define xd_r_reg_sfoe_out_9_2	0xA328
-#define	reg_sfoe_out_9_2_pos 0
-#define	reg_sfoe_out_9_2_len 8
-#define	reg_sfoe_out_9_2_lsb 0
-#define xd_r_reg_sfoe_out_1_0	0xA329
-#define	reg_sfoe_out_1_0_pos 0
-#define	reg_sfoe_out_1_0_len 2
-#define	reg_sfoe_out_1_0_lsb 0
-#define xd_p_reg_sfoe_lm_counter_th	0xA32A
-#define	reg_sfoe_lm_counter_th_pos 0
-#define	reg_sfoe_lm_counter_th_len 4
-#define	reg_sfoe_lm_counter_th_lsb 0
-#define xd_p_reg_sfoe_convg_th	0xA32B
-#define	reg_sfoe_convg_th_pos 0
-#define	reg_sfoe_convg_th_len 8
-#define	reg_sfoe_convg_th_lsb 0
-#define xd_p_reg_sfoe_divg_th	0xA32C
-#define	reg_sfoe_divg_th_pos 0
-#define	reg_sfoe_divg_th_len 8
-#define	reg_sfoe_divg_th_lsb 0
-#define xd_p_fd_tpsd_en	0xA330
-#define	fd_tpsd_en_pos 0
-#define	fd_tpsd_en_len 1
-#define	fd_tpsd_en_lsb 0
-#define xd_p_fd_tpsd_dis	0xA330
-#define	fd_tpsd_dis_pos 1
-#define	fd_tpsd_dis_len 1
-#define	fd_tpsd_dis_lsb 0
-#define xd_p_fd_tpsd_rst	0xA330
-#define	fd_tpsd_rst_pos 2
-#define	fd_tpsd_rst_len 1
-#define	fd_tpsd_rst_lsb 0
-#define xd_p_fd_tpsd_lock	0xA330
-#define	fd_tpsd_lock_pos 3
-#define	fd_tpsd_lock_len 1
-#define	fd_tpsd_lock_lsb 0
-#define xd_r_fd_tpsd_s19	0xA330
-#define	fd_tpsd_s19_pos 4
-#define	fd_tpsd_s19_len 1
-#define	fd_tpsd_s19_lsb 0
-#define xd_r_fd_tpsd_s17	0xA330
-#define	fd_tpsd_s17_pos 5
-#define	fd_tpsd_s17_len 1
-#define	fd_tpsd_s17_lsb 0
-#define xd_p_fd_sfr_ste_en	0xA331
-#define	fd_sfr_ste_en_pos 0
-#define	fd_sfr_ste_en_len 1
-#define	fd_sfr_ste_en_lsb 0
-#define xd_p_fd_sfr_ste_dis	0xA331
-#define	fd_sfr_ste_dis_pos 1
-#define	fd_sfr_ste_dis_len 1
-#define	fd_sfr_ste_dis_lsb 0
-#define xd_p_fd_sfr_ste_rst	0xA331
-#define	fd_sfr_ste_rst_pos 2
-#define	fd_sfr_ste_rst_len 1
-#define	fd_sfr_ste_rst_lsb 0
-#define xd_p_fd_sfr_ste_mode	0xA331
-#define	fd_sfr_ste_mode_pos 3
-#define	fd_sfr_ste_mode_len 1
-#define	fd_sfr_ste_mode_lsb 0
-#define xd_p_fd_sfr_ste_done	0xA331
-#define	fd_sfr_ste_done_pos 4
-#define	fd_sfr_ste_done_len 1
-#define	fd_sfr_ste_done_lsb 0
-#define xd_p_reg_cfoe_ffoe_en	0xA332
-#define	reg_cfoe_ffoe_en_pos 0
-#define	reg_cfoe_ffoe_en_len 1
-#define	reg_cfoe_ffoe_en_lsb 0
-#define xd_p_reg_cfoe_ffoe_dis	0xA332
-#define	reg_cfoe_ffoe_dis_pos 1
-#define	reg_cfoe_ffoe_dis_len 1
-#define	reg_cfoe_ffoe_dis_lsb 0
-#define xd_p_reg_cfoe_ffoe_rst	0xA332
-#define	reg_cfoe_ffoe_rst_pos 2
-#define	reg_cfoe_ffoe_rst_len 1
-#define	reg_cfoe_ffoe_rst_lsb 0
-#define xd_p_reg_cfoe_ifoe_en	0xA332
-#define	reg_cfoe_ifoe_en_pos 3
-#define	reg_cfoe_ifoe_en_len 1
-#define	reg_cfoe_ifoe_en_lsb 0
-#define xd_p_reg_cfoe_ifoe_dis	0xA332
-#define	reg_cfoe_ifoe_dis_pos 4
-#define	reg_cfoe_ifoe_dis_len 1
-#define	reg_cfoe_ifoe_dis_lsb 0
-#define xd_p_reg_cfoe_ifoe_rst	0xA332
-#define	reg_cfoe_ifoe_rst_pos 5
-#define	reg_cfoe_ifoe_rst_len 1
-#define	reg_cfoe_ifoe_rst_lsb 0
-#define xd_p_reg_cfoe_fot_en	0xA332
-#define	reg_cfoe_fot_en_pos 6
-#define	reg_cfoe_fot_en_len 1
-#define	reg_cfoe_fot_en_lsb 0
-#define xd_p_reg_cfoe_fot_lm_en	0xA332
-#define	reg_cfoe_fot_lm_en_pos 7
-#define	reg_cfoe_fot_lm_en_len 1
-#define	reg_cfoe_fot_lm_en_lsb 0
-#define xd_p_reg_cfoe_fot_rst	0xA333
-#define	reg_cfoe_fot_rst_pos 0
-#define	reg_cfoe_fot_rst_len 1
-#define	reg_cfoe_fot_rst_lsb 0
-#define xd_r_fd_cfoe_ffoe_done	0xA333
-#define	fd_cfoe_ffoe_done_pos 1
-#define	fd_cfoe_ffoe_done_len 1
-#define	fd_cfoe_ffoe_done_lsb 0
-#define xd_p_fd_cfoe_metric_vld	0xA333
-#define	fd_cfoe_metric_vld_pos 2
-#define	fd_cfoe_metric_vld_len 1
-#define	fd_cfoe_metric_vld_lsb 0
-#define xd_p_reg_cfoe_ifod_vld	0xA333
-#define	reg_cfoe_ifod_vld_pos 3
-#define	reg_cfoe_ifod_vld_len 1
-#define	reg_cfoe_ifod_vld_lsb 0
-#define xd_r_fd_cfoe_ifoe_done	0xA333
-#define	fd_cfoe_ifoe_done_pos 4
-#define	fd_cfoe_ifoe_done_len 1
-#define	fd_cfoe_ifoe_done_lsb 0
-#define xd_r_fd_cfoe_fot_valid	0xA333
-#define	fd_cfoe_fot_valid_pos 5
-#define	fd_cfoe_fot_valid_len 1
-#define	fd_cfoe_fot_valid_lsb 0
-#define xd_p_reg_cfoe_divg_int	0xA333
-#define	reg_cfoe_divg_int_pos 6
-#define	reg_cfoe_divg_int_len 1
-#define	reg_cfoe_divg_int_lsb 0
-#define xd_r_reg_cfoe_divg_flag	0xA333
-#define	reg_cfoe_divg_flag_pos 7
-#define	reg_cfoe_divg_flag_len 1
-#define	reg_cfoe_divg_flag_lsb 0
-#define xd_p_reg_sfoe_en	0xA334
-#define	reg_sfoe_en_pos 0
-#define	reg_sfoe_en_len 1
-#define	reg_sfoe_en_lsb 0
-#define xd_p_reg_sfoe_dis	0xA334
-#define	reg_sfoe_dis_pos 1
-#define	reg_sfoe_dis_len 1
-#define	reg_sfoe_dis_lsb 0
-#define xd_p_reg_sfoe_rst	0xA334
-#define	reg_sfoe_rst_pos 2
-#define	reg_sfoe_rst_len 1
-#define	reg_sfoe_rst_lsb 0
-#define xd_p_reg_sfoe_vld_int	0xA334
-#define	reg_sfoe_vld_int_pos 3
-#define	reg_sfoe_vld_int_len 1
-#define	reg_sfoe_vld_int_lsb 0
-#define xd_p_reg_sfoe_lm_en	0xA334
-#define	reg_sfoe_lm_en_pos 4
-#define	reg_sfoe_lm_en_len 1
-#define	reg_sfoe_lm_en_lsb 0
-#define xd_p_reg_sfoe_divg_int	0xA334
-#define	reg_sfoe_divg_int_pos 5
-#define	reg_sfoe_divg_int_len 1
-#define	reg_sfoe_divg_int_lsb 0
-#define xd_r_reg_sfoe_divg_flag	0xA334
-#define	reg_sfoe_divg_flag_pos 6
-#define	reg_sfoe_divg_flag_len 1
-#define	reg_sfoe_divg_flag_lsb 0
-#define xd_p_reg_fft_rst	0xA335
-#define	reg_fft_rst_pos 0
-#define	reg_fft_rst_len 1
-#define	reg_fft_rst_lsb 0
-#define xd_p_reg_fft_fast_beacon	0xA335
-#define	reg_fft_fast_beacon_pos 1
-#define	reg_fft_fast_beacon_len 1
-#define	reg_fft_fast_beacon_lsb 0
-#define xd_p_reg_fft_fast_valid	0xA335
-#define	reg_fft_fast_valid_pos 2
-#define	reg_fft_fast_valid_len 1
-#define	reg_fft_fast_valid_lsb 0
-#define xd_p_reg_fft_mask_en	0xA335
-#define	reg_fft_mask_en_pos 3
-#define	reg_fft_mask_en_len 1
-#define	reg_fft_mask_en_lsb 0
-#define xd_p_reg_fft_crc_en	0xA335
-#define	reg_fft_crc_en_pos 4
-#define	reg_fft_crc_en_len 1
-#define	reg_fft_crc_en_lsb 0
-#define xd_p_reg_finr_en	0xA336
-#define	reg_finr_en_pos 0
-#define	reg_finr_en_len 1
-#define	reg_finr_en_lsb 0
-#define xd_p_fd_fste_en	0xA337
-#define	fd_fste_en_pos 1
-#define	fd_fste_en_len 1
-#define	fd_fste_en_lsb 0
-#define xd_p_fd_sqi_tps_level_shift	0xA338
-#define	fd_sqi_tps_level_shift_pos 0
-#define	fd_sqi_tps_level_shift_len 8
-#define	fd_sqi_tps_level_shift_lsb 0
-#define xd_p_fd_pilot_ma_len	0xA339
-#define	fd_pilot_ma_len_pos 0
-#define	fd_pilot_ma_len_len 6
-#define	fd_pilot_ma_len_lsb 0
-#define xd_p_fd_tps_ma_len	0xA33A
-#define	fd_tps_ma_len_pos 0
-#define	fd_tps_ma_len_len 6
-#define	fd_tps_ma_len_lsb 0
-#define xd_p_fd_sqi_s3	0xA33B
-#define	fd_sqi_s3_pos 0
-#define	fd_sqi_s3_len 8
-#define	fd_sqi_s3_lsb 0
-#define xd_p_fd_sqi_dummy_reg_0	0xA33C
-#define	fd_sqi_dummy_reg_0_pos 0
-#define	fd_sqi_dummy_reg_0_len 1
-#define	fd_sqi_dummy_reg_0_lsb 0
-#define xd_p_fd_sqi_debug_sel	0xA33C
-#define	fd_sqi_debug_sel_pos 1
-#define	fd_sqi_debug_sel_len 2
-#define	fd_sqi_debug_sel_lsb 0
-#define xd_p_fd_sqi_s2	0xA33C
-#define	fd_sqi_s2_pos 3
-#define	fd_sqi_s2_len 5
-#define	fd_sqi_s2_lsb 0
-#define xd_p_fd_sqi_dummy_reg_1	0xA33D
-#define	fd_sqi_dummy_reg_1_pos 0
-#define	fd_sqi_dummy_reg_1_len 1
-#define	fd_sqi_dummy_reg_1_lsb 0
-#define xd_p_fd_inr_ignore	0xA33D
-#define	fd_inr_ignore_pos 1
-#define	fd_inr_ignore_len 1
-#define	fd_inr_ignore_lsb 0
-#define xd_p_fd_pilot_ignore	0xA33D
-#define	fd_pilot_ignore_pos 2
-#define	fd_pilot_ignore_len 1
-#define	fd_pilot_ignore_lsb 0
-#define xd_p_fd_etps_ignore	0xA33D
-#define	fd_etps_ignore_pos 3
-#define	fd_etps_ignore_len 1
-#define	fd_etps_ignore_lsb 0
-#define xd_p_fd_sqi_s1	0xA33D
-#define	fd_sqi_s1_pos 4
-#define	fd_sqi_s1_len 4
-#define	fd_sqi_s1_lsb 0
-#define xd_p_reg_fste_ehw_7_0	0xA33E
-#define	reg_fste_ehw_7_0_pos 0
-#define	reg_fste_ehw_7_0_len 8
-#define	reg_fste_ehw_7_0_lsb 0
-#define xd_p_reg_fste_ehw_9_8	0xA33F
-#define	reg_fste_ehw_9_8_pos 0
-#define	reg_fste_ehw_9_8_len 2
-#define	reg_fste_ehw_9_8_lsb 8
-#define xd_p_reg_fste_i_adj_vld	0xA33F
-#define	reg_fste_i_adj_vld_pos 2
-#define	reg_fste_i_adj_vld_len 1
-#define	reg_fste_i_adj_vld_lsb 0
-#define xd_p_reg_fste_phase_ini_7_0	0xA340
-#define	reg_fste_phase_ini_7_0_pos 0
-#define	reg_fste_phase_ini_7_0_len 8
-#define	reg_fste_phase_ini_7_0_lsb 0
-#define xd_p_reg_fste_phase_ini_11_8	0xA341
-#define	reg_fste_phase_ini_11_8_pos 0
-#define	reg_fste_phase_ini_11_8_len 4
-#define	reg_fste_phase_ini_11_8_lsb 8
-#define xd_p_reg_fste_phase_inc_3_0	0xA341
-#define	reg_fste_phase_inc_3_0_pos 4
-#define	reg_fste_phase_inc_3_0_len 4
-#define	reg_fste_phase_inc_3_0_lsb 0
-#define xd_p_reg_fste_phase_inc_11_4	0xA342
-#define	reg_fste_phase_inc_11_4_pos 0
-#define	reg_fste_phase_inc_11_4_len 8
-#define	reg_fste_phase_inc_11_4_lsb 4
-#define xd_p_reg_fste_acum_cost_cnt_max	0xA343
-#define	reg_fste_acum_cost_cnt_max_pos 0
-#define	reg_fste_acum_cost_cnt_max_len 4
-#define	reg_fste_acum_cost_cnt_max_lsb 0
-#define xd_p_reg_fste_step_size_std	0xA343
-#define	reg_fste_step_size_std_pos 4
-#define	reg_fste_step_size_std_len 4
-#define	reg_fste_step_size_std_lsb 0
-#define xd_p_reg_fste_step_size_max	0xA344
-#define	reg_fste_step_size_max_pos 0
-#define	reg_fste_step_size_max_len 4
-#define	reg_fste_step_size_max_lsb 0
-#define xd_p_reg_fste_step_size_min	0xA344
-#define	reg_fste_step_size_min_pos 4
-#define	reg_fste_step_size_min_len 4
-#define	reg_fste_step_size_min_lsb 0
-#define xd_p_reg_fste_frac_step_size_7_0	0xA345
-#define	reg_fste_frac_step_size_7_0_pos 0
-#define	reg_fste_frac_step_size_7_0_len 8
-#define	reg_fste_frac_step_size_7_0_lsb 0
-#define xd_p_reg_fste_frac_step_size_15_8	0xA346
-#define	reg_fste_frac_step_size_15_8_pos 0
-#define	reg_fste_frac_step_size_15_8_len 8
-#define	reg_fste_frac_step_size_15_8_lsb 8
-#define xd_p_reg_fste_frac_step_size_19_16	0xA347
-#define	reg_fste_frac_step_size_19_16_pos 0
-#define	reg_fste_frac_step_size_19_16_len 4
-#define	reg_fste_frac_step_size_19_16_lsb 16
-#define xd_p_reg_fste_rpd_dir_cnt_max	0xA347
-#define	reg_fste_rpd_dir_cnt_max_pos 4
-#define	reg_fste_rpd_dir_cnt_max_len 4
-#define	reg_fste_rpd_dir_cnt_max_lsb 0
-#define xd_p_reg_fste_ehs	0xA348
-#define	reg_fste_ehs_pos 0
-#define	reg_fste_ehs_len 4
-#define	reg_fste_ehs_lsb 0
-#define xd_p_reg_fste_frac_cost_cnt_max_3_0	0xA348
-#define	reg_fste_frac_cost_cnt_max_3_0_pos 4
-#define	reg_fste_frac_cost_cnt_max_3_0_len 4
-#define	reg_fste_frac_cost_cnt_max_3_0_lsb 0
-#define xd_p_reg_fste_frac_cost_cnt_max_9_4	0xA349
-#define	reg_fste_frac_cost_cnt_max_9_4_pos 0
-#define	reg_fste_frac_cost_cnt_max_9_4_len 6
-#define	reg_fste_frac_cost_cnt_max_9_4_lsb 4
-#define xd_p_reg_fste_w0_7_0	0xA34A
-#define	reg_fste_w0_7_0_pos 0
-#define	reg_fste_w0_7_0_len 8
-#define	reg_fste_w0_7_0_lsb 0
-#define xd_p_reg_fste_w0_11_8	0xA34B
-#define	reg_fste_w0_11_8_pos 0
-#define	reg_fste_w0_11_8_len 4
-#define	reg_fste_w0_11_8_lsb 8
-#define xd_p_reg_fste_w1_3_0	0xA34B
-#define	reg_fste_w1_3_0_pos 4
-#define	reg_fste_w1_3_0_len 4
-#define	reg_fste_w1_3_0_lsb 0
-#define xd_p_reg_fste_w1_11_4	0xA34C
-#define	reg_fste_w1_11_4_pos 0
-#define	reg_fste_w1_11_4_len 8
-#define	reg_fste_w1_11_4_lsb 4
-#define xd_p_reg_fste_w2_7_0	0xA34D
-#define	reg_fste_w2_7_0_pos 0
-#define	reg_fste_w2_7_0_len 8
-#define	reg_fste_w2_7_0_lsb 0
-#define xd_p_reg_fste_w2_11_8	0xA34E
-#define	reg_fste_w2_11_8_pos 0
-#define	reg_fste_w2_11_8_len 4
-#define	reg_fste_w2_11_8_lsb 8
-#define xd_p_reg_fste_w3_3_0	0xA34E
-#define	reg_fste_w3_3_0_pos 4
-#define	reg_fste_w3_3_0_len 4
-#define	reg_fste_w3_3_0_lsb 0
-#define xd_p_reg_fste_w3_11_4	0xA34F
-#define	reg_fste_w3_11_4_pos 0
-#define	reg_fste_w3_11_4_len 8
-#define	reg_fste_w3_11_4_lsb 4
-#define xd_p_reg_fste_w4_7_0	0xA350
-#define	reg_fste_w4_7_0_pos 0
-#define	reg_fste_w4_7_0_len 8
-#define	reg_fste_w4_7_0_lsb 0
-#define xd_p_reg_fste_w4_11_8	0xA351
-#define	reg_fste_w4_11_8_pos 0
-#define	reg_fste_w4_11_8_len 4
-#define	reg_fste_w4_11_8_lsb 8
-#define xd_p_reg_fste_w5_3_0	0xA351
-#define	reg_fste_w5_3_0_pos 4
-#define	reg_fste_w5_3_0_len 4
-#define	reg_fste_w5_3_0_lsb 0
-#define xd_p_reg_fste_w5_11_4	0xA352
-#define	reg_fste_w5_11_4_pos 0
-#define	reg_fste_w5_11_4_len 8
-#define	reg_fste_w5_11_4_lsb 4
-#define xd_p_reg_fste_w6_7_0	0xA353
-#define	reg_fste_w6_7_0_pos 0
-#define	reg_fste_w6_7_0_len 8
-#define	reg_fste_w6_7_0_lsb 0
-#define xd_p_reg_fste_w6_11_8	0xA354
-#define	reg_fste_w6_11_8_pos 0
-#define	reg_fste_w6_11_8_len 4
-#define	reg_fste_w6_11_8_lsb 8
-#define xd_p_reg_fste_w7_3_0	0xA354
-#define	reg_fste_w7_3_0_pos 4
-#define	reg_fste_w7_3_0_len 4
-#define	reg_fste_w7_3_0_lsb 0
-#define xd_p_reg_fste_w7_11_4	0xA355
-#define	reg_fste_w7_11_4_pos 0
-#define	reg_fste_w7_11_4_len 8
-#define	reg_fste_w7_11_4_lsb 4
-#define xd_p_reg_fste_w8_7_0	0xA356
-#define	reg_fste_w8_7_0_pos 0
-#define	reg_fste_w8_7_0_len 8
-#define	reg_fste_w8_7_0_lsb 0
-#define xd_p_reg_fste_w8_11_8	0xA357
-#define	reg_fste_w8_11_8_pos 0
-#define	reg_fste_w8_11_8_len 4
-#define	reg_fste_w8_11_8_lsb 8
-#define xd_p_reg_fste_w9_3_0	0xA357
-#define	reg_fste_w9_3_0_pos 4
-#define	reg_fste_w9_3_0_len 4
-#define	reg_fste_w9_3_0_lsb 0
-#define xd_p_reg_fste_w9_11_4	0xA358
-#define	reg_fste_w9_11_4_pos 0
-#define	reg_fste_w9_11_4_len 8
-#define	reg_fste_w9_11_4_lsb 4
-#define xd_p_reg_fste_wa_7_0	0xA359
-#define	reg_fste_wa_7_0_pos 0
-#define	reg_fste_wa_7_0_len 8
-#define	reg_fste_wa_7_0_lsb 0
-#define xd_p_reg_fste_wa_11_8	0xA35A
-#define	reg_fste_wa_11_8_pos 0
-#define	reg_fste_wa_11_8_len 4
-#define	reg_fste_wa_11_8_lsb 8
-#define xd_p_reg_fste_wb_3_0	0xA35A
-#define	reg_fste_wb_3_0_pos 4
-#define	reg_fste_wb_3_0_len 4
-#define	reg_fste_wb_3_0_lsb 0
-#define xd_p_reg_fste_wb_11_4	0xA35B
-#define	reg_fste_wb_11_4_pos 0
-#define	reg_fste_wb_11_4_len 8
-#define	reg_fste_wb_11_4_lsb 4
-#define xd_r_fd_fste_i_adj	0xA35C
-#define	fd_fste_i_adj_pos 0
-#define	fd_fste_i_adj_len 5
-#define	fd_fste_i_adj_lsb 0
-#define xd_r_fd_fste_f_adj_7_0	0xA35D
-#define	fd_fste_f_adj_7_0_pos 0
-#define	fd_fste_f_adj_7_0_len 8
-#define	fd_fste_f_adj_7_0_lsb 0
-#define xd_r_fd_fste_f_adj_15_8	0xA35E
-#define	fd_fste_f_adj_15_8_pos 0
-#define	fd_fste_f_adj_15_8_len 8
-#define	fd_fste_f_adj_15_8_lsb 8
-#define xd_r_fd_fste_f_adj_19_16	0xA35F
-#define	fd_fste_f_adj_19_16_pos 0
-#define	fd_fste_f_adj_19_16_len 4
-#define	fd_fste_f_adj_19_16_lsb 16
-#define xd_p_reg_feq_Leak_Bypass	0xA366
-#define	reg_feq_Leak_Bypass_pos 0
-#define	reg_feq_Leak_Bypass_len 1
-#define	reg_feq_Leak_Bypass_lsb 0
-#define xd_p_reg_feq_Leak_Mneg1	0xA366
-#define	reg_feq_Leak_Mneg1_pos 1
-#define	reg_feq_Leak_Mneg1_len 3
-#define	reg_feq_Leak_Mneg1_lsb 0
-#define xd_p_reg_feq_Leak_B_ShiftQ	0xA366
-#define	reg_feq_Leak_B_ShiftQ_pos 4
-#define	reg_feq_Leak_B_ShiftQ_len 4
-#define	reg_feq_Leak_B_ShiftQ_lsb 0
-#define xd_p_reg_feq_Leak_B_Float0	0xA367
-#define	reg_feq_Leak_B_Float0_pos 0
-#define	reg_feq_Leak_B_Float0_len 8
-#define	reg_feq_Leak_B_Float0_lsb 0
-#define xd_p_reg_feq_Leak_B_Float1	0xA368
-#define	reg_feq_Leak_B_Float1_pos 0
-#define	reg_feq_Leak_B_Float1_len 8
-#define	reg_feq_Leak_B_Float1_lsb 0
-#define xd_p_reg_feq_Leak_B_Float2	0xA369
-#define	reg_feq_Leak_B_Float2_pos 0
-#define	reg_feq_Leak_B_Float2_len 8
-#define	reg_feq_Leak_B_Float2_lsb 0
-#define xd_p_reg_feq_Leak_B_Float3	0xA36A
-#define	reg_feq_Leak_B_Float3_pos 0
-#define	reg_feq_Leak_B_Float3_len 8
-#define	reg_feq_Leak_B_Float3_lsb 0
-#define xd_p_reg_feq_Leak_B_Float4	0xA36B
-#define	reg_feq_Leak_B_Float4_pos 0
-#define	reg_feq_Leak_B_Float4_len 8
-#define	reg_feq_Leak_B_Float4_lsb 0
-#define xd_p_reg_feq_Leak_B_Float5	0xA36C
-#define	reg_feq_Leak_B_Float5_pos 0
-#define	reg_feq_Leak_B_Float5_len 8
-#define	reg_feq_Leak_B_Float5_lsb 0
-#define xd_p_reg_feq_Leak_B_Float6	0xA36D
-#define	reg_feq_Leak_B_Float6_pos 0
-#define	reg_feq_Leak_B_Float6_len 8
-#define	reg_feq_Leak_B_Float6_lsb 0
-#define xd_p_reg_feq_Leak_B_Float7	0xA36E
-#define	reg_feq_Leak_B_Float7_pos 0
-#define	reg_feq_Leak_B_Float7_len 8
-#define	reg_feq_Leak_B_Float7_lsb 0
-#define xd_r_reg_feq_data_h2_7_0	0xA36F
-#define	reg_feq_data_h2_7_0_pos 0
-#define	reg_feq_data_h2_7_0_len 8
-#define	reg_feq_data_h2_7_0_lsb 0
-#define xd_r_reg_feq_data_h2_9_8	0xA370
-#define	reg_feq_data_h2_9_8_pos 0
-#define	reg_feq_data_h2_9_8_len 2
-#define	reg_feq_data_h2_9_8_lsb 8
-#define xd_p_reg_feq_leak_use_slice_tps	0xA371
-#define	reg_feq_leak_use_slice_tps_pos 0
-#define	reg_feq_leak_use_slice_tps_len 1
-#define	reg_feq_leak_use_slice_tps_lsb 0
-#define xd_p_reg_feq_read_update	0xA371
-#define	reg_feq_read_update_pos 1
-#define	reg_feq_read_update_len 1
-#define	reg_feq_read_update_lsb 0
-#define xd_p_reg_feq_data_vld	0xA371
-#define	reg_feq_data_vld_pos 2
-#define	reg_feq_data_vld_len 1
-#define	reg_feq_data_vld_lsb 0
-#define xd_p_reg_feq_tone_idx_4_0	0xA371
-#define	reg_feq_tone_idx_4_0_pos 3
-#define	reg_feq_tone_idx_4_0_len 5
-#define	reg_feq_tone_idx_4_0_lsb 0
-#define xd_p_reg_feq_tone_idx_12_5	0xA372
-#define	reg_feq_tone_idx_12_5_pos 0
-#define	reg_feq_tone_idx_12_5_len 8
-#define	reg_feq_tone_idx_12_5_lsb 5
-#define xd_r_reg_feq_data_re_7_0	0xA373
-#define	reg_feq_data_re_7_0_pos 0
-#define	reg_feq_data_re_7_0_len 8
-#define	reg_feq_data_re_7_0_lsb 0
-#define xd_r_reg_feq_data_re_10_8	0xA374
-#define	reg_feq_data_re_10_8_pos 0
-#define	reg_feq_data_re_10_8_len 3
-#define	reg_feq_data_re_10_8_lsb 8
-#define xd_r_reg_feq_data_im_7_0	0xA375
-#define	reg_feq_data_im_7_0_pos 0
-#define	reg_feq_data_im_7_0_len 8
-#define	reg_feq_data_im_7_0_lsb 0
-#define xd_r_reg_feq_data_im_10_8	0xA376
-#define	reg_feq_data_im_10_8_pos 0
-#define	reg_feq_data_im_10_8_len 3
-#define	reg_feq_data_im_10_8_lsb 8
-#define xd_r_reg_feq_y_re	0xA377
-#define	reg_feq_y_re_pos 0
-#define	reg_feq_y_re_len 8
-#define	reg_feq_y_re_lsb 0
-#define xd_r_reg_feq_y_im	0xA378
-#define	reg_feq_y_im_pos 0
-#define	reg_feq_y_im_len 8
-#define	reg_feq_y_im_lsb 0
-#define xd_r_reg_feq_h_re_7_0	0xA379
-#define	reg_feq_h_re_7_0_pos 0
-#define	reg_feq_h_re_7_0_len 8
-#define	reg_feq_h_re_7_0_lsb 0
-#define xd_r_reg_feq_h_re_8	0xA37A
-#define	reg_feq_h_re_8_pos 0
-#define	reg_feq_h_re_8_len 1
-#define	reg_feq_h_re_8_lsb 0
-#define xd_r_reg_feq_h_im_7_0	0xA37B
-#define	reg_feq_h_im_7_0_pos 0
-#define	reg_feq_h_im_7_0_len 8
-#define	reg_feq_h_im_7_0_lsb 0
-#define xd_r_reg_feq_h_im_8	0xA37C
-#define	reg_feq_h_im_8_pos 0
-#define	reg_feq_h_im_8_len 1
-#define	reg_feq_h_im_8_lsb 0
-#define xd_p_fec_super_frm_unit_7_0	0xA380
-#define	fec_super_frm_unit_7_0_pos 0
-#define	fec_super_frm_unit_7_0_len 8
-#define	fec_super_frm_unit_7_0_lsb 0
-#define xd_p_fec_super_frm_unit_15_8	0xA381
-#define	fec_super_frm_unit_15_8_pos 0
-#define	fec_super_frm_unit_15_8_len 8
-#define	fec_super_frm_unit_15_8_lsb 8
-#define xd_r_fec_vtb_err_bit_cnt_7_0	0xA382
-#define	fec_vtb_err_bit_cnt_7_0_pos 0
-#define	fec_vtb_err_bit_cnt_7_0_len 8
-#define	fec_vtb_err_bit_cnt_7_0_lsb 0
-#define xd_r_fec_vtb_err_bit_cnt_15_8	0xA383
-#define	fec_vtb_err_bit_cnt_15_8_pos 0
-#define	fec_vtb_err_bit_cnt_15_8_len 8
-#define	fec_vtb_err_bit_cnt_15_8_lsb 8
-#define xd_r_fec_vtb_err_bit_cnt_23_16	0xA384
-#define	fec_vtb_err_bit_cnt_23_16_pos 0
-#define	fec_vtb_err_bit_cnt_23_16_len 8
-#define	fec_vtb_err_bit_cnt_23_16_lsb 16
-#define xd_p_fec_rsd_packet_unit_7_0	0xA385
-#define	fec_rsd_packet_unit_7_0_pos 0
-#define	fec_rsd_packet_unit_7_0_len 8
-#define	fec_rsd_packet_unit_7_0_lsb 0
-#define xd_p_fec_rsd_packet_unit_15_8	0xA386
-#define	fec_rsd_packet_unit_15_8_pos 0
-#define	fec_rsd_packet_unit_15_8_len 8
-#define	fec_rsd_packet_unit_15_8_lsb 8
-#define xd_r_fec_rsd_bit_err_cnt_7_0	0xA387
-#define	fec_rsd_bit_err_cnt_7_0_pos 0
-#define	fec_rsd_bit_err_cnt_7_0_len 8
-#define	fec_rsd_bit_err_cnt_7_0_lsb 0
-#define xd_r_fec_rsd_bit_err_cnt_15_8	0xA388
-#define	fec_rsd_bit_err_cnt_15_8_pos 0
-#define	fec_rsd_bit_err_cnt_15_8_len 8
-#define	fec_rsd_bit_err_cnt_15_8_lsb 8
-#define xd_r_fec_rsd_bit_err_cnt_23_16	0xA389
-#define	fec_rsd_bit_err_cnt_23_16_pos 0
-#define	fec_rsd_bit_err_cnt_23_16_len 8
-#define	fec_rsd_bit_err_cnt_23_16_lsb 16
-#define xd_r_fec_rsd_abort_packet_cnt_7_0	0xA38A
-#define	fec_rsd_abort_packet_cnt_7_0_pos 0
-#define	fec_rsd_abort_packet_cnt_7_0_len 8
-#define	fec_rsd_abort_packet_cnt_7_0_lsb 0
-#define xd_r_fec_rsd_abort_packet_cnt_15_8	0xA38B
-#define	fec_rsd_abort_packet_cnt_15_8_pos 0
-#define	fec_rsd_abort_packet_cnt_15_8_len 8
-#define	fec_rsd_abort_packet_cnt_15_8_lsb 8
-#define xd_p_fec_RSD_PKT_NUM_PER_UNIT_7_0	0xA38C
-#define	fec_RSD_PKT_NUM_PER_UNIT_7_0_pos 0
-#define	fec_RSD_PKT_NUM_PER_UNIT_7_0_len 8
-#define	fec_RSD_PKT_NUM_PER_UNIT_7_0_lsb 0
-#define xd_p_fec_RSD_PKT_NUM_PER_UNIT_15_8	0xA38D
-#define	fec_RSD_PKT_NUM_PER_UNIT_15_8_pos 0
-#define	fec_RSD_PKT_NUM_PER_UNIT_15_8_len 8
-#define	fec_RSD_PKT_NUM_PER_UNIT_15_8_lsb 8
-#define xd_p_fec_RS_TH_1_7_0	0xA38E
-#define	fec_RS_TH_1_7_0_pos 0
-#define	fec_RS_TH_1_7_0_len 8
-#define	fec_RS_TH_1_7_0_lsb 0
-#define xd_p_fec_RS_TH_1_15_8	0xA38F
-#define	fec_RS_TH_1_15_8_pos 0
-#define	fec_RS_TH_1_15_8_len 8
-#define	fec_RS_TH_1_15_8_lsb 8
-#define xd_p_fec_RS_TH_2	0xA390
-#define	fec_RS_TH_2_pos 0
-#define	fec_RS_TH_2_len 8
-#define	fec_RS_TH_2_lsb 0
-#define xd_p_fec_mon_en	0xA391
-#define	fec_mon_en_pos 0
-#define	fec_mon_en_len 1
-#define	fec_mon_en_lsb 0
-#define xd_p_reg_b8to47	0xA391
-#define	reg_b8to47_pos 1
-#define	reg_b8to47_len 1
-#define	reg_b8to47_lsb 0
-#define xd_p_reg_rsd_sync_rep	0xA391
-#define	reg_rsd_sync_rep_pos 2
-#define	reg_rsd_sync_rep_len 1
-#define	reg_rsd_sync_rep_lsb 0
-#define xd_p_fec_rsd_retrain_rst	0xA391
-#define	fec_rsd_retrain_rst_pos 3
-#define	fec_rsd_retrain_rst_len 1
-#define	fec_rsd_retrain_rst_lsb 0
-#define xd_r_fec_rsd_ber_rdy	0xA391
-#define	fec_rsd_ber_rdy_pos 4
-#define	fec_rsd_ber_rdy_len 1
-#define	fec_rsd_ber_rdy_lsb 0
-#define xd_p_fec_rsd_ber_rst	0xA391
-#define	fec_rsd_ber_rst_pos 5
-#define	fec_rsd_ber_rst_len 1
-#define	fec_rsd_ber_rst_lsb 0
-#define xd_r_fec_vtb_ber_rdy	0xA391
-#define	fec_vtb_ber_rdy_pos 6
-#define	fec_vtb_ber_rdy_len 1
-#define	fec_vtb_ber_rdy_lsb 0
-#define xd_p_fec_vtb_ber_rst	0xA391
-#define	fec_vtb_ber_rst_pos 7
-#define	fec_vtb_ber_rst_len 1
-#define	fec_vtb_ber_rst_lsb 0
-#define xd_p_reg_vtb_clk40en	0xA392
-#define	reg_vtb_clk40en_pos 0
-#define	reg_vtb_clk40en_len 1
-#define	reg_vtb_clk40en_lsb 0
-#define xd_p_fec_vtb_rsd_mon_en	0xA392
-#define	fec_vtb_rsd_mon_en_pos 1
-#define	fec_vtb_rsd_mon_en_len 1
-#define	fec_vtb_rsd_mon_en_lsb 0
-#define xd_p_reg_fec_data_en	0xA392
-#define	reg_fec_data_en_pos 2
-#define	reg_fec_data_en_len 1
-#define	reg_fec_data_en_lsb 0
-#define xd_p_fec_dummy_reg_2	0xA392
-#define	fec_dummy_reg_2_pos 3
-#define	fec_dummy_reg_2_len 3
-#define	fec_dummy_reg_2_lsb 0
-#define xd_p_reg_sync_chk	0xA392
-#define	reg_sync_chk_pos 6
-#define	reg_sync_chk_len 1
-#define	reg_sync_chk_lsb 0
-#define xd_p_fec_rsd_bypass	0xA392
-#define	fec_rsd_bypass_pos 7
-#define	fec_rsd_bypass_len 1
-#define	fec_rsd_bypass_lsb 0
-#define xd_p_fec_sw_rst	0xA393
-#define	fec_sw_rst_pos 0
-#define	fec_sw_rst_len 1
-#define	fec_sw_rst_lsb 0
-#define xd_r_fec_vtb_pm_crc	0xA394
-#define	fec_vtb_pm_crc_pos 0
-#define	fec_vtb_pm_crc_len 8
-#define	fec_vtb_pm_crc_lsb 0
-#define xd_r_fec_vtb_tb_7_crc	0xA395
-#define	fec_vtb_tb_7_crc_pos 0
-#define	fec_vtb_tb_7_crc_len 8
-#define	fec_vtb_tb_7_crc_lsb 0
-#define xd_r_fec_vtb_tb_6_crc	0xA396
-#define	fec_vtb_tb_6_crc_pos 0
-#define	fec_vtb_tb_6_crc_len 8
-#define	fec_vtb_tb_6_crc_lsb 0
-#define xd_r_fec_vtb_tb_5_crc	0xA397
-#define	fec_vtb_tb_5_crc_pos 0
-#define	fec_vtb_tb_5_crc_len 8
-#define	fec_vtb_tb_5_crc_lsb 0
-#define xd_r_fec_vtb_tb_4_crc	0xA398
-#define	fec_vtb_tb_4_crc_pos 0
-#define	fec_vtb_tb_4_crc_len 8
-#define	fec_vtb_tb_4_crc_lsb 0
-#define xd_r_fec_vtb_tb_3_crc	0xA399
-#define	fec_vtb_tb_3_crc_pos 0
-#define	fec_vtb_tb_3_crc_len 8
-#define	fec_vtb_tb_3_crc_lsb 0
-#define xd_r_fec_vtb_tb_2_crc	0xA39A
-#define	fec_vtb_tb_2_crc_pos 0
-#define	fec_vtb_tb_2_crc_len 8
-#define	fec_vtb_tb_2_crc_lsb 0
-#define xd_r_fec_vtb_tb_1_crc	0xA39B
-#define	fec_vtb_tb_1_crc_pos 0
-#define	fec_vtb_tb_1_crc_len 8
-#define	fec_vtb_tb_1_crc_lsb 0
-#define xd_r_fec_vtb_tb_0_crc	0xA39C
-#define	fec_vtb_tb_0_crc_pos 0
-#define	fec_vtb_tb_0_crc_len 8
-#define	fec_vtb_tb_0_crc_lsb 0
-#define xd_r_fec_rsd_bank0_crc	0xA39D
-#define	fec_rsd_bank0_crc_pos 0
-#define	fec_rsd_bank0_crc_len 8
-#define	fec_rsd_bank0_crc_lsb 0
-#define xd_r_fec_rsd_bank1_crc	0xA39E
-#define	fec_rsd_bank1_crc_pos 0
-#define	fec_rsd_bank1_crc_len 8
-#define	fec_rsd_bank1_crc_lsb 0
-#define xd_r_fec_idi_vtb_crc	0xA39F
-#define	fec_idi_vtb_crc_pos 0
-#define	fec_idi_vtb_crc_len 8
-#define	fec_idi_vtb_crc_lsb 0
-#define xd_g_reg_tpsd_txmod	0xA3C0
-#define	reg_tpsd_txmod_pos 0
-#define	reg_tpsd_txmod_len 2
-#define	reg_tpsd_txmod_lsb 0
-#define xd_g_reg_tpsd_gi	0xA3C0
-#define	reg_tpsd_gi_pos 2
-#define	reg_tpsd_gi_len 2
-#define	reg_tpsd_gi_lsb 0
-#define xd_g_reg_tpsd_hier	0xA3C0
-#define	reg_tpsd_hier_pos 4
-#define	reg_tpsd_hier_len 3
-#define	reg_tpsd_hier_lsb 0
-#define xd_g_reg_bw	0xA3C1
-#define	reg_bw_pos 2
-#define	reg_bw_len 2
-#define	reg_bw_lsb 0
-#define xd_g_reg_dec_pri	0xA3C1
-#define	reg_dec_pri_pos 4
-#define	reg_dec_pri_len 1
-#define	reg_dec_pri_lsb 0
-#define xd_g_reg_tpsd_const	0xA3C1
-#define	reg_tpsd_const_pos 6
-#define	reg_tpsd_const_len 2
-#define	reg_tpsd_const_lsb 0
-#define xd_g_reg_tpsd_hpcr	0xA3C2
-#define	reg_tpsd_hpcr_pos 0
-#define	reg_tpsd_hpcr_len 3
-#define	reg_tpsd_hpcr_lsb 0
-#define xd_g_reg_tpsd_lpcr	0xA3C2
-#define	reg_tpsd_lpcr_pos 3
-#define	reg_tpsd_lpcr_len 3
-#define	reg_tpsd_lpcr_lsb 0
-#define xd_g_reg_ofsm_clk	0xA3D0
-#define	reg_ofsm_clk_pos 0
-#define	reg_ofsm_clk_len 3
-#define	reg_ofsm_clk_lsb 0
-#define xd_g_reg_fclk_cfg	0xA3D1
-#define	reg_fclk_cfg_pos 0
-#define	reg_fclk_cfg_len 1
-#define	reg_fclk_cfg_lsb 0
-#define xd_g_reg_fclk_idi	0xA3D1
-#define	reg_fclk_idi_pos 1
-#define	reg_fclk_idi_len 1
-#define	reg_fclk_idi_lsb 0
-#define xd_g_reg_fclk_odi	0xA3D1
-#define	reg_fclk_odi_pos 2
-#define	reg_fclk_odi_len 1
-#define	reg_fclk_odi_lsb 0
-#define xd_g_reg_fclk_rsd	0xA3D1
-#define	reg_fclk_rsd_pos 3
-#define	reg_fclk_rsd_len 1
-#define	reg_fclk_rsd_lsb 0
-#define xd_g_reg_fclk_vtb	0xA3D1
-#define	reg_fclk_vtb_pos 4
-#define	reg_fclk_vtb_len 1
-#define	reg_fclk_vtb_lsb 0
-#define xd_g_reg_fclk_cste	0xA3D1
-#define	reg_fclk_cste_pos 5
-#define	reg_fclk_cste_len 1
-#define	reg_fclk_cste_lsb 0
-#define xd_g_reg_fclk_mp2if	0xA3D1
-#define	reg_fclk_mp2if_pos 6
-#define	reg_fclk_mp2if_len 1
-#define	reg_fclk_mp2if_lsb 0
-#define xd_I2C_i2c_m_slave_addr	0xA400
-#define	i2c_m_slave_addr_pos 0
-#define	i2c_m_slave_addr_len 8
-#define	i2c_m_slave_addr_lsb 0
-#define xd_I2C_i2c_m_data1	0xA401
-#define	i2c_m_data1_pos 0
-#define	i2c_m_data1_len 8
-#define	i2c_m_data1_lsb 0
-#define xd_I2C_i2c_m_data2	0xA402
-#define	i2c_m_data2_pos 0
-#define	i2c_m_data2_len 8
-#define	i2c_m_data2_lsb 0
-#define xd_I2C_i2c_m_data3	0xA403
-#define	i2c_m_data3_pos 0
-#define	i2c_m_data3_len 8
-#define	i2c_m_data3_lsb 0
-#define xd_I2C_i2c_m_data4	0xA404
-#define	i2c_m_data4_pos 0
-#define	i2c_m_data4_len 8
-#define	i2c_m_data4_lsb 0
-#define xd_I2C_i2c_m_data5	0xA405
-#define	i2c_m_data5_pos 0
-#define	i2c_m_data5_len 8
-#define	i2c_m_data5_lsb 0
-#define xd_I2C_i2c_m_data6	0xA406
-#define	i2c_m_data6_pos 0
-#define	i2c_m_data6_len 8
-#define	i2c_m_data6_lsb 0
-#define xd_I2C_i2c_m_data7	0xA407
-#define	i2c_m_data7_pos 0
-#define	i2c_m_data7_len 8
-#define	i2c_m_data7_lsb 0
-#define xd_I2C_i2c_m_data8	0xA408
-#define	i2c_m_data8_pos 0
-#define	i2c_m_data8_len 8
-#define	i2c_m_data8_lsb 0
-#define xd_I2C_i2c_m_data9	0xA409
-#define	i2c_m_data9_pos 0
-#define	i2c_m_data9_len 8
-#define	i2c_m_data9_lsb 0
-#define xd_I2C_i2c_m_data10	0xA40A
-#define	i2c_m_data10_pos 0
-#define	i2c_m_data10_len 8
-#define	i2c_m_data10_lsb 0
-#define xd_I2C_i2c_m_data11	0xA40B
-#define	i2c_m_data11_pos 0
-#define	i2c_m_data11_len 8
-#define	i2c_m_data11_lsb 0
-#define xd_I2C_i2c_m_cmd_rw	0xA40C
-#define	i2c_m_cmd_rw_pos 0
-#define	i2c_m_cmd_rw_len 1
-#define	i2c_m_cmd_rw_lsb 0
-#define xd_I2C_i2c_m_cmd_rwlen	0xA40C
-#define	i2c_m_cmd_rwlen_pos 3
-#define	i2c_m_cmd_rwlen_len 4
-#define	i2c_m_cmd_rwlen_lsb 0
-#define xd_I2C_i2c_m_status_cmd_exe	0xA40D
-#define	i2c_m_status_cmd_exe_pos 0
-#define	i2c_m_status_cmd_exe_len 1
-#define	i2c_m_status_cmd_exe_lsb 0
-#define xd_I2C_i2c_m_status_wdat_done	0xA40D
-#define	i2c_m_status_wdat_done_pos 1
-#define	i2c_m_status_wdat_done_len 1
-#define	i2c_m_status_wdat_done_lsb 0
-#define xd_I2C_i2c_m_status_wdat_fail	0xA40D
-#define	i2c_m_status_wdat_fail_pos 2
-#define	i2c_m_status_wdat_fail_len 1
-#define	i2c_m_status_wdat_fail_lsb 0
-#define xd_I2C_i2c_m_period	0xA40E
-#define	i2c_m_period_pos 0
-#define	i2c_m_period_len 8
-#define	i2c_m_period_lsb 0
-#define xd_I2C_i2c_m_reg_msb_lsb	0xA40F
-#define	i2c_m_reg_msb_lsb_pos 0
-#define	i2c_m_reg_msb_lsb_len 1
-#define	i2c_m_reg_msb_lsb_lsb 0
-#define xd_I2C_reg_ofdm_rst	0xA40F
-#define	reg_ofdm_rst_pos 1
-#define	reg_ofdm_rst_len 1
-#define	reg_ofdm_rst_lsb 0
-#define xd_I2C_reg_sample_period_on_tuner	0xA40F
-#define	reg_sample_period_on_tuner_pos 2
-#define	reg_sample_period_on_tuner_len 1
-#define	reg_sample_period_on_tuner_lsb 0
-#define xd_I2C_reg_rst_i2c	0xA40F
-#define	reg_rst_i2c_pos 3
-#define	reg_rst_i2c_len 1
-#define	reg_rst_i2c_lsb 0
-#define xd_I2C_reg_ofdm_rst_en	0xA40F
-#define	reg_ofdm_rst_en_pos 4
-#define	reg_ofdm_rst_en_len 1
-#define	reg_ofdm_rst_en_lsb 0
-#define xd_I2C_reg_tuner_sda_sync_on	0xA40F
-#define	reg_tuner_sda_sync_on_pos 5
-#define	reg_tuner_sda_sync_on_len 1
-#define	reg_tuner_sda_sync_on_lsb 0
-#define xd_p_mp2if_data_access_disable_ofsm	0xA500
-#define	mp2if_data_access_disable_ofsm_pos 0
-#define	mp2if_data_access_disable_ofsm_len 1
-#define	mp2if_data_access_disable_ofsm_lsb 0
-#define xd_p_reg_mp2_sw_rst_ofsm	0xA500
-#define	reg_mp2_sw_rst_ofsm_pos 1
-#define	reg_mp2_sw_rst_ofsm_len 1
-#define	reg_mp2_sw_rst_ofsm_lsb 0
-#define xd_p_reg_mp2if_clk_en_ofsm	0xA500
-#define	reg_mp2if_clk_en_ofsm_pos 2
-#define	reg_mp2if_clk_en_ofsm_len 1
-#define	reg_mp2if_clk_en_ofsm_lsb 0
-#define xd_r_mp2if_sync_byte_locked	0xA500
-#define	mp2if_sync_byte_locked_pos 3
-#define	mp2if_sync_byte_locked_len 1
-#define	mp2if_sync_byte_locked_lsb 0
-#define xd_r_mp2if_ts_not_188	0xA500
-#define	mp2if_ts_not_188_pos 4
-#define	mp2if_ts_not_188_len 1
-#define	mp2if_ts_not_188_lsb 0
-#define xd_r_mp2if_psb_empty	0xA500
-#define	mp2if_psb_empty_pos 5
-#define	mp2if_psb_empty_len 1
-#define	mp2if_psb_empty_lsb 0
-#define xd_r_mp2if_psb_overflow	0xA500
-#define	mp2if_psb_overflow_pos 6
-#define	mp2if_psb_overflow_len 1
-#define	mp2if_psb_overflow_lsb 0
-#define xd_p_mp2if_keep_sf_sync_byte_ofsm	0xA500
-#define	mp2if_keep_sf_sync_byte_ofsm_pos 7
-#define	mp2if_keep_sf_sync_byte_ofsm_len 1
-#define	mp2if_keep_sf_sync_byte_ofsm_lsb 0
-#define xd_r_mp2if_psb_mp2if_num_pkt	0xA501
-#define	mp2if_psb_mp2if_num_pkt_pos 0
-#define	mp2if_psb_mp2if_num_pkt_len 6
-#define	mp2if_psb_mp2if_num_pkt_lsb 0
-#define xd_p_reg_mpeg_full_speed_ofsm	0xA501
-#define	reg_mpeg_full_speed_ofsm_pos 6
-#define	reg_mpeg_full_speed_ofsm_len 1
-#define	reg_mpeg_full_speed_ofsm_lsb 0
-#define xd_p_mp2if_mpeg_ser_mode_ofsm	0xA501
-#define	mp2if_mpeg_ser_mode_ofsm_pos 7
-#define	mp2if_mpeg_ser_mode_ofsm_len 1
-#define	mp2if_mpeg_ser_mode_ofsm_lsb 0
-#define xd_p_reg_sw_mon51	0xA600
-#define	reg_sw_mon51_pos 0
-#define	reg_sw_mon51_len 8
-#define	reg_sw_mon51_lsb 0
-#define xd_p_reg_top_pcsel	0xA601
-#define	reg_top_pcsel_pos 0
-#define	reg_top_pcsel_len 1
-#define	reg_top_pcsel_lsb 0
-#define xd_p_reg_top_rs232	0xA601
-#define	reg_top_rs232_pos 1
-#define	reg_top_rs232_len 1
-#define	reg_top_rs232_lsb 0
-#define xd_p_reg_top_pcout	0xA601
-#define	reg_top_pcout_pos 2
-#define	reg_top_pcout_len 1
-#define	reg_top_pcout_lsb 0
-#define xd_p_reg_top_debug	0xA601
-#define	reg_top_debug_pos 3
-#define	reg_top_debug_len 1
-#define	reg_top_debug_lsb 0
-#define xd_p_reg_top_adcdly	0xA601
-#define	reg_top_adcdly_pos 4
-#define	reg_top_adcdly_len 2
-#define	reg_top_adcdly_lsb 0
-#define xd_p_reg_top_pwrdw	0xA601
-#define	reg_top_pwrdw_pos 6
-#define	reg_top_pwrdw_len 1
-#define	reg_top_pwrdw_lsb 0
-#define xd_p_reg_top_pwrdw_inv	0xA601
-#define	reg_top_pwrdw_inv_pos 7
-#define	reg_top_pwrdw_inv_len 1
-#define	reg_top_pwrdw_inv_lsb 0
-#define xd_p_reg_top_int_inv	0xA602
-#define	reg_top_int_inv_pos 0
-#define	reg_top_int_inv_len 1
-#define	reg_top_int_inv_lsb 0
-#define xd_p_reg_top_dio_sel	0xA602
-#define	reg_top_dio_sel_pos 1
-#define	reg_top_dio_sel_len 1
-#define	reg_top_dio_sel_lsb 0
-#define xd_p_reg_top_gpioon0	0xA603
-#define	reg_top_gpioon0_pos 0
-#define	reg_top_gpioon0_len 1
-#define	reg_top_gpioon0_lsb 0
-#define xd_p_reg_top_gpioon1	0xA603
-#define	reg_top_gpioon1_pos 1
-#define	reg_top_gpioon1_len 1
-#define	reg_top_gpioon1_lsb 0
-#define xd_p_reg_top_gpioon2	0xA603
-#define	reg_top_gpioon2_pos 2
-#define	reg_top_gpioon2_len 1
-#define	reg_top_gpioon2_lsb 0
-#define xd_p_reg_top_gpioon3	0xA603
-#define	reg_top_gpioon3_pos 3
-#define	reg_top_gpioon3_len 1
-#define	reg_top_gpioon3_lsb 0
-#define xd_p_reg_top_lockon1	0xA603
-#define	reg_top_lockon1_pos 4
-#define	reg_top_lockon1_len 1
-#define	reg_top_lockon1_lsb 0
-#define xd_p_reg_top_lockon2	0xA603
-#define	reg_top_lockon2_pos 5
-#define	reg_top_lockon2_len 1
-#define	reg_top_lockon2_lsb 0
-#define xd_p_reg_top_gpioo0	0xA604
-#define	reg_top_gpioo0_pos 0
-#define	reg_top_gpioo0_len 1
-#define	reg_top_gpioo0_lsb 0
-#define xd_p_reg_top_gpioo1	0xA604
-#define	reg_top_gpioo1_pos 1
-#define	reg_top_gpioo1_len 1
-#define	reg_top_gpioo1_lsb 0
-#define xd_p_reg_top_gpioo2	0xA604
-#define	reg_top_gpioo2_pos 2
-#define	reg_top_gpioo2_len 1
-#define	reg_top_gpioo2_lsb 0
-#define xd_p_reg_top_gpioo3	0xA604
-#define	reg_top_gpioo3_pos 3
-#define	reg_top_gpioo3_len 1
-#define	reg_top_gpioo3_lsb 0
-#define xd_p_reg_top_lock1	0xA604
-#define	reg_top_lock1_pos 4
-#define	reg_top_lock1_len 1
-#define	reg_top_lock1_lsb 0
-#define xd_p_reg_top_lock2	0xA604
-#define	reg_top_lock2_pos 5
-#define	reg_top_lock2_len 1
-#define	reg_top_lock2_lsb 0
-#define xd_p_reg_top_gpioen0	0xA605
-#define	reg_top_gpioen0_pos 0
-#define	reg_top_gpioen0_len 1
-#define	reg_top_gpioen0_lsb 0
-#define xd_p_reg_top_gpioen1	0xA605
-#define	reg_top_gpioen1_pos 1
-#define	reg_top_gpioen1_len 1
-#define	reg_top_gpioen1_lsb 0
-#define xd_p_reg_top_gpioen2	0xA605
-#define	reg_top_gpioen2_pos 2
-#define	reg_top_gpioen2_len 1
-#define	reg_top_gpioen2_lsb 0
-#define xd_p_reg_top_gpioen3	0xA605
-#define	reg_top_gpioen3_pos 3
-#define	reg_top_gpioen3_len 1
-#define	reg_top_gpioen3_lsb 0
-#define xd_p_reg_top_locken1	0xA605
-#define	reg_top_locken1_pos 4
-#define	reg_top_locken1_len 1
-#define	reg_top_locken1_lsb 0
-#define xd_p_reg_top_locken2	0xA605
-#define	reg_top_locken2_pos 5
-#define	reg_top_locken2_len 1
-#define	reg_top_locken2_lsb 0
-#define xd_r_reg_top_gpioi0	0xA606
-#define	reg_top_gpioi0_pos 0
-#define	reg_top_gpioi0_len 1
-#define	reg_top_gpioi0_lsb 0
-#define xd_r_reg_top_gpioi1	0xA606
-#define	reg_top_gpioi1_pos 1
-#define	reg_top_gpioi1_len 1
-#define	reg_top_gpioi1_lsb 0
-#define xd_r_reg_top_gpioi2	0xA606
-#define	reg_top_gpioi2_pos 2
-#define	reg_top_gpioi2_len 1
-#define	reg_top_gpioi2_lsb 0
-#define xd_r_reg_top_gpioi3	0xA606
-#define	reg_top_gpioi3_pos 3
-#define	reg_top_gpioi3_len 1
-#define	reg_top_gpioi3_lsb 0
-#define xd_r_reg_top_locki1	0xA606
-#define	reg_top_locki1_pos 4
-#define	reg_top_locki1_len 1
-#define	reg_top_locki1_lsb 0
-#define xd_r_reg_top_locki2	0xA606
-#define	reg_top_locki2_pos 5
-#define	reg_top_locki2_len 1
-#define	reg_top_locki2_lsb 0
-#define xd_p_reg_dummy_7_0	0xA608
-#define	reg_dummy_7_0_pos 0
-#define	reg_dummy_7_0_len 8
-#define	reg_dummy_7_0_lsb 0
-#define xd_p_reg_dummy_15_8	0xA609
-#define	reg_dummy_15_8_pos 0
-#define	reg_dummy_15_8_len 8
-#define	reg_dummy_15_8_lsb 8
-#define xd_p_reg_dummy_23_16	0xA60A
-#define	reg_dummy_23_16_pos 0
-#define	reg_dummy_23_16_len 8
-#define	reg_dummy_23_16_lsb 16
-#define xd_p_reg_dummy_31_24	0xA60B
-#define	reg_dummy_31_24_pos 0
-#define	reg_dummy_31_24_len 8
-#define	reg_dummy_31_24_lsb 24
-#define xd_p_reg_dummy_39_32	0xA60C
-#define	reg_dummy_39_32_pos 0
-#define	reg_dummy_39_32_len 8
-#define	reg_dummy_39_32_lsb 32
-#define xd_p_reg_dummy_47_40	0xA60D
-#define	reg_dummy_47_40_pos 0
-#define	reg_dummy_47_40_len 8
-#define	reg_dummy_47_40_lsb 40
-#define xd_p_reg_dummy_55_48	0xA60E
-#define	reg_dummy_55_48_pos 0
-#define	reg_dummy_55_48_len 8
-#define	reg_dummy_55_48_lsb 48
-#define xd_p_reg_dummy_63_56	0xA60F
-#define	reg_dummy_63_56_pos 0
-#define	reg_dummy_63_56_len 8
-#define	reg_dummy_63_56_lsb 56
-#define xd_p_reg_dummy_71_64	0xA610
-#define	reg_dummy_71_64_pos 0
-#define	reg_dummy_71_64_len 8
-#define	reg_dummy_71_64_lsb 64
-#define xd_p_reg_dummy_79_72	0xA611
-#define	reg_dummy_79_72_pos 0
-#define	reg_dummy_79_72_len 8
-#define	reg_dummy_79_72_lsb 72
-#define xd_p_reg_dummy_87_80	0xA612
-#define	reg_dummy_87_80_pos 0
-#define	reg_dummy_87_80_len 8
-#define	reg_dummy_87_80_lsb 80
-#define xd_p_reg_dummy_95_88	0xA613
-#define	reg_dummy_95_88_pos 0
-#define	reg_dummy_95_88_len 8
-#define	reg_dummy_95_88_lsb 88
-#define xd_p_reg_dummy_103_96	0xA614
-#define	reg_dummy_103_96_pos 0
-#define	reg_dummy_103_96_len 8
-#define	reg_dummy_103_96_lsb 96
-
-#define xd_p_reg_unplug_flag	0xA615
-#define	reg_unplug_flag_pos 0
-#define	reg_unplug_flag_len 1
-#define	reg_unplug_flag_lsb 104
-
-#define xd_p_reg_api_dca_stes_request   0xA615
-#define reg_api_dca_stes_request_pos 1
-#define reg_api_dca_stes_request_len 1
-#define reg_api_dca_stes_request_lsb 0
-
-#define xd_p_reg_back_to_dca_flag	0xA615
-#define	reg_back_to_dca_flag_pos 2
-#define	reg_back_to_dca_flag_len 1
-#define	reg_back_to_dca_flag_lsb 106
-
-#define xd_p_reg_api_retrain_request    0xA615
-#define reg_api_retrain_request_pos 3
-#define reg_api_retrain_request_len 1
-#define reg_api_retrain_request_lsb 0
-
-#define xd_p_reg_Dyn_Top_Try_flag	0xA615
-#define	reg_Dyn_Top_Try_flag_pos 3
-#define	reg_Dyn_Top_Try_flag_len 1
-#define	reg_Dyn_Top_Try_flag_lsb 107
-
-#define xd_p_reg_API_retrain_freeze_flag	0xA615
-#define	reg_API_retrain_freeze_flag_pos 4
-#define	reg_API_retrain_freeze_flag_len 1
-#define	reg_API_retrain_freeze_flag_lsb 108
-
-#define xd_p_reg_dummy_111_104	0xA615
-#define	reg_dummy_111_104_pos 0
-#define	reg_dummy_111_104_len 8
-#define	reg_dummy_111_104_lsb 104
-#define xd_p_reg_dummy_119_112	0xA616
-#define	reg_dummy_119_112_pos 0
-#define	reg_dummy_119_112_len 8
-#define	reg_dummy_119_112_lsb 112
-#define xd_p_reg_dummy_127_120	0xA617
-#define	reg_dummy_127_120_pos 0
-#define	reg_dummy_127_120_len 8
-#define	reg_dummy_127_120_lsb 120
-#define xd_p_reg_dummy_135_128	0xA618
-#define	reg_dummy_135_128_pos 0
-#define	reg_dummy_135_128_len 8
-#define	reg_dummy_135_128_lsb 128
-
-#define xd_p_reg_dummy_143_136	0xA619
-#define	reg_dummy_143_136_pos 0
-#define	reg_dummy_143_136_len 8
-#define	reg_dummy_143_136_lsb 136
-
-#define xd_p_reg_CCIR_dis	0xA619
-#define	reg_CCIR_dis_pos 0
-#define	reg_CCIR_dis_len 1
-#define	reg_CCIR_dis_lsb 0
-
-#define xd_p_reg_dummy_151_144	0xA61A
-#define	reg_dummy_151_144_pos 0
-#define	reg_dummy_151_144_len 8
-#define	reg_dummy_151_144_lsb 144
-
-#define xd_p_reg_dummy_159_152	0xA61B
-#define	reg_dummy_159_152_pos 0
-#define	reg_dummy_159_152_len 8
-#define	reg_dummy_159_152_lsb 152
-
-#define xd_p_reg_dummy_167_160	0xA61C
-#define	reg_dummy_167_160_pos 0
-#define	reg_dummy_167_160_len 8
-#define	reg_dummy_167_160_lsb 160
-
-#define xd_p_reg_dummy_175_168	0xA61D
-#define	reg_dummy_175_168_pos 0
-#define	reg_dummy_175_168_len 8
-#define	reg_dummy_175_168_lsb 168
-
-#define xd_p_reg_dummy_183_176	0xA61E
-#define	reg_dummy_183_176_pos 0
-#define	reg_dummy_183_176_len 8
-#define	reg_dummy_183_176_lsb 176
-
-#define xd_p_reg_ofsm_read_rbc_en  0xA61E
-#define reg_ofsm_read_rbc_en_pos 2
-#define reg_ofsm_read_rbc_en_len 1
-#define reg_ofsm_read_rbc_en_lsb 0
-
-#define xd_p_reg_ce_filter_selection_dis  0xA61E
-#define reg_ce_filter_selection_dis_pos 1
-#define reg_ce_filter_selection_dis_len 1
-#define reg_ce_filter_selection_dis_lsb 0
-
-#define xd_p_reg_OFSM_version_control_7_0  0xA611
-#define reg_OFSM_version_control_7_0_pos 0
-#define reg_OFSM_version_control_7_0_len 8
-#define reg_OFSM_version_control_7_0_lsb 0
-
-#define xd_p_reg_OFSM_version_control_15_8  0xA61F
-#define reg_OFSM_version_control_15_8_pos 0
-#define reg_OFSM_version_control_15_8_len 8
-#define reg_OFSM_version_control_15_8_lsb 0
-
-#define xd_p_reg_OFSM_version_control_23_16  0xA620
-#define reg_OFSM_version_control_23_16_pos 0
-#define reg_OFSM_version_control_23_16_len 8
-#define reg_OFSM_version_control_23_16_lsb 0
-
-#define xd_p_reg_dummy_191_184	0xA61F
-#define	reg_dummy_191_184_pos 0
-#define	reg_dummy_191_184_len 8
-#define	reg_dummy_191_184_lsb 184
-
-#define xd_p_reg_dummy_199_192	0xA620
-#define	reg_dummy_199_192_pos 0
-#define	reg_dummy_199_192_len 8
-#define	reg_dummy_199_192_lsb 192
-
-#define xd_p_reg_ce_en	0xABC0
-#define	reg_ce_en_pos 0
-#define	reg_ce_en_len 1
-#define	reg_ce_en_lsb 0
-#define xd_p_reg_ce_fctrl_en	0xABC0
-#define	reg_ce_fctrl_en_pos 1
-#define	reg_ce_fctrl_en_len 1
-#define	reg_ce_fctrl_en_lsb 0
-#define xd_p_reg_ce_fste_tdi	0xABC0
-#define	reg_ce_fste_tdi_pos 2
-#define	reg_ce_fste_tdi_len 1
-#define	reg_ce_fste_tdi_lsb 0
-#define xd_p_reg_ce_dynamic	0xABC0
-#define	reg_ce_dynamic_pos 3
-#define	reg_ce_dynamic_len 1
-#define	reg_ce_dynamic_lsb 0
-#define xd_p_reg_ce_conf	0xABC0
-#define	reg_ce_conf_pos 4
-#define	reg_ce_conf_len 2
-#define	reg_ce_conf_lsb 0
-#define xd_p_reg_ce_dyn12	0xABC0
-#define	reg_ce_dyn12_pos 6
-#define	reg_ce_dyn12_len 1
-#define	reg_ce_dyn12_lsb 0
-#define xd_p_reg_ce_derot_en	0xABC0
-#define	reg_ce_derot_en_pos 7
-#define	reg_ce_derot_en_len 1
-#define	reg_ce_derot_en_lsb 0
-#define xd_p_reg_ce_dynamic_th_7_0	0xABC1
-#define	reg_ce_dynamic_th_7_0_pos 0
-#define	reg_ce_dynamic_th_7_0_len 8
-#define	reg_ce_dynamic_th_7_0_lsb 0
-#define xd_p_reg_ce_dynamic_th_15_8	0xABC2
-#define	reg_ce_dynamic_th_15_8_pos 0
-#define	reg_ce_dynamic_th_15_8_len 8
-#define	reg_ce_dynamic_th_15_8_lsb 8
-#define xd_p_reg_ce_s1	0xABC3
-#define	reg_ce_s1_pos 0
-#define	reg_ce_s1_len 5
-#define	reg_ce_s1_lsb 0
-#define xd_p_reg_ce_var_forced_value	0xABC3
-#define	reg_ce_var_forced_value_pos 5
-#define	reg_ce_var_forced_value_len 3
-#define	reg_ce_var_forced_value_lsb 0
-#define xd_p_reg_ce_data_im_7_0	0xABC4
-#define	reg_ce_data_im_7_0_pos 0
-#define	reg_ce_data_im_7_0_len 8
-#define	reg_ce_data_im_7_0_lsb 0
-#define xd_p_reg_ce_data_im_8	0xABC5
-#define	reg_ce_data_im_8_pos 0
-#define	reg_ce_data_im_8_len 1
-#define	reg_ce_data_im_8_lsb 0
-#define xd_p_reg_ce_data_re_6_0	0xABC5
-#define	reg_ce_data_re_6_0_pos 1
-#define	reg_ce_data_re_6_0_len 7
-#define	reg_ce_data_re_6_0_lsb 0
-#define xd_p_reg_ce_data_re_8_7	0xABC6
-#define	reg_ce_data_re_8_7_pos 0
-#define	reg_ce_data_re_8_7_len 2
-#define	reg_ce_data_re_8_7_lsb 7
-#define xd_p_reg_ce_tone_5_0	0xABC6
-#define	reg_ce_tone_5_0_pos 2
-#define	reg_ce_tone_5_0_len 6
-#define	reg_ce_tone_5_0_lsb 0
-#define xd_p_reg_ce_tone_12_6	0xABC7
-#define	reg_ce_tone_12_6_pos 0
-#define	reg_ce_tone_12_6_len 7
-#define	reg_ce_tone_12_6_lsb 6
-#define xd_p_reg_ce_centroid_drift_th	0xABC8
-#define	reg_ce_centroid_drift_th_pos 0
-#define	reg_ce_centroid_drift_th_len 8
-#define	reg_ce_centroid_drift_th_lsb 0
-#define xd_p_reg_ce_centroid_count_max	0xABC9
-#define	reg_ce_centroid_count_max_pos 0
-#define	reg_ce_centroid_count_max_len 4
-#define	reg_ce_centroid_count_max_lsb 0
-#define xd_p_reg_ce_centroid_bias_inc_7_0	0xABCA
-#define	reg_ce_centroid_bias_inc_7_0_pos 0
-#define	reg_ce_centroid_bias_inc_7_0_len 8
-#define	reg_ce_centroid_bias_inc_7_0_lsb 0
-#define xd_p_reg_ce_centroid_bias_inc_8	0xABCB
-#define	reg_ce_centroid_bias_inc_8_pos 0
-#define	reg_ce_centroid_bias_inc_8_len 1
-#define	reg_ce_centroid_bias_inc_8_lsb 0
-#define xd_p_reg_ce_var_th0_7_0	0xABCC
-#define	reg_ce_var_th0_7_0_pos 0
-#define	reg_ce_var_th0_7_0_len 8
-#define	reg_ce_var_th0_7_0_lsb 0
-#define xd_p_reg_ce_var_th0_15_8	0xABCD
-#define	reg_ce_var_th0_15_8_pos 0
-#define	reg_ce_var_th0_15_8_len 8
-#define	reg_ce_var_th0_15_8_lsb 8
-#define xd_p_reg_ce_var_th1_7_0	0xABCE
-#define	reg_ce_var_th1_7_0_pos 0
-#define	reg_ce_var_th1_7_0_len 8
-#define	reg_ce_var_th1_7_0_lsb 0
-#define xd_p_reg_ce_var_th1_15_8	0xABCF
-#define	reg_ce_var_th1_15_8_pos 0
-#define	reg_ce_var_th1_15_8_len 8
-#define	reg_ce_var_th1_15_8_lsb 8
-#define xd_p_reg_ce_var_th2_7_0	0xABD0
-#define	reg_ce_var_th2_7_0_pos 0
-#define	reg_ce_var_th2_7_0_len 8
-#define	reg_ce_var_th2_7_0_lsb 0
-#define xd_p_reg_ce_var_th2_15_8	0xABD1
-#define	reg_ce_var_th2_15_8_pos 0
-#define	reg_ce_var_th2_15_8_len 8
-#define	reg_ce_var_th2_15_8_lsb 8
-#define xd_p_reg_ce_var_th3_7_0	0xABD2
-#define	reg_ce_var_th3_7_0_pos 0
-#define	reg_ce_var_th3_7_0_len 8
-#define	reg_ce_var_th3_7_0_lsb 0
-#define xd_p_reg_ce_var_th3_15_8	0xABD3
-#define	reg_ce_var_th3_15_8_pos 0
-#define	reg_ce_var_th3_15_8_len 8
-#define	reg_ce_var_th3_15_8_lsb 8
-#define xd_p_reg_ce_var_th4_7_0	0xABD4
-#define	reg_ce_var_th4_7_0_pos 0
-#define	reg_ce_var_th4_7_0_len 8
-#define	reg_ce_var_th4_7_0_lsb 0
-#define xd_p_reg_ce_var_th4_15_8	0xABD5
-#define	reg_ce_var_th4_15_8_pos 0
-#define	reg_ce_var_th4_15_8_len 8
-#define	reg_ce_var_th4_15_8_lsb 8
-#define xd_p_reg_ce_var_th5_7_0	0xABD6
-#define	reg_ce_var_th5_7_0_pos 0
-#define	reg_ce_var_th5_7_0_len 8
-#define	reg_ce_var_th5_7_0_lsb 0
-#define xd_p_reg_ce_var_th5_15_8	0xABD7
-#define	reg_ce_var_th5_15_8_pos 0
-#define	reg_ce_var_th5_15_8_len 8
-#define	reg_ce_var_th5_15_8_lsb 8
-#define xd_p_reg_ce_var_th6_7_0	0xABD8
-#define	reg_ce_var_th6_7_0_pos 0
-#define	reg_ce_var_th6_7_0_len 8
-#define	reg_ce_var_th6_7_0_lsb 0
-#define xd_p_reg_ce_var_th6_15_8	0xABD9
-#define	reg_ce_var_th6_15_8_pos 0
-#define	reg_ce_var_th6_15_8_len 8
-#define	reg_ce_var_th6_15_8_lsb 8
-#define xd_p_reg_ce_fctrl_reset	0xABDA
-#define	reg_ce_fctrl_reset_pos 0
-#define	reg_ce_fctrl_reset_len 1
-#define	reg_ce_fctrl_reset_lsb 0
-#define xd_p_reg_ce_cent_auto_clr_en	0xABDA
-#define	reg_ce_cent_auto_clr_en_pos 1
-#define	reg_ce_cent_auto_clr_en_len 1
-#define	reg_ce_cent_auto_clr_en_lsb 0
-#define xd_p_reg_ce_fctrl_auto_reset_en	0xABDA
-#define	reg_ce_fctrl_auto_reset_en_pos 2
-#define	reg_ce_fctrl_auto_reset_en_len 1
-#define	reg_ce_fctrl_auto_reset_en_lsb 0
-#define xd_p_reg_ce_var_forced_en	0xABDA
-#define	reg_ce_var_forced_en_pos 3
-#define	reg_ce_var_forced_en_len 1
-#define	reg_ce_var_forced_en_lsb 0
-#define xd_p_reg_ce_cent_forced_en	0xABDA
-#define	reg_ce_cent_forced_en_pos 4
-#define	reg_ce_cent_forced_en_len 1
-#define	reg_ce_cent_forced_en_lsb 0
-#define xd_p_reg_ce_var_max	0xABDA
-#define	reg_ce_var_max_pos 5
-#define	reg_ce_var_max_len 3
-#define	reg_ce_var_max_lsb 0
-#define xd_p_reg_ce_cent_forced_value_7_0	0xABDB
-#define	reg_ce_cent_forced_value_7_0_pos 0
-#define	reg_ce_cent_forced_value_7_0_len 8
-#define	reg_ce_cent_forced_value_7_0_lsb 0
-#define xd_p_reg_ce_cent_forced_value_11_8	0xABDC
-#define	reg_ce_cent_forced_value_11_8_pos 0
-#define	reg_ce_cent_forced_value_11_8_len 4
-#define	reg_ce_cent_forced_value_11_8_lsb 8
-#define xd_p_reg_ce_fctrl_rd	0xABDD
-#define	reg_ce_fctrl_rd_pos 0
-#define	reg_ce_fctrl_rd_len 1
-#define	reg_ce_fctrl_rd_lsb 0
-#define xd_p_reg_ce_centroid_max_6_0	0xABDD
-#define	reg_ce_centroid_max_6_0_pos 1
-#define	reg_ce_centroid_max_6_0_len 7
-#define	reg_ce_centroid_max_6_0_lsb 0
-#define xd_p_reg_ce_centroid_max_11_7	0xABDE
-#define	reg_ce_centroid_max_11_7_pos 0
-#define	reg_ce_centroid_max_11_7_len 5
-#define	reg_ce_centroid_max_11_7_lsb 7
-#define xd_p_reg_ce_var	0xABDF
-#define	reg_ce_var_pos 0
-#define	reg_ce_var_len 3
-#define	reg_ce_var_lsb 0
-#define xd_p_reg_ce_fctrl_rdy	0xABDF
-#define	reg_ce_fctrl_rdy_pos 3
-#define	reg_ce_fctrl_rdy_len 1
-#define	reg_ce_fctrl_rdy_lsb 0
-#define xd_p_reg_ce_centroid_out_3_0	0xABDF
-#define	reg_ce_centroid_out_3_0_pos 4
-#define	reg_ce_centroid_out_3_0_len 4
-#define	reg_ce_centroid_out_3_0_lsb 0
-#define xd_p_reg_ce_centroid_out_11_4	0xABE0
-#define	reg_ce_centroid_out_11_4_pos 0
-#define	reg_ce_centroid_out_11_4_len 8
-#define	reg_ce_centroid_out_11_4_lsb 4
-#define xd_p_reg_ce_bias_7_0	0xABE1
-#define	reg_ce_bias_7_0_pos 0
-#define	reg_ce_bias_7_0_len 8
-#define	reg_ce_bias_7_0_lsb 0
-#define xd_p_reg_ce_bias_11_8	0xABE2
-#define	reg_ce_bias_11_8_pos 0
-#define	reg_ce_bias_11_8_len 4
-#define	reg_ce_bias_11_8_lsb 8
-#define xd_p_reg_ce_m1_3_0	0xABE2
-#define	reg_ce_m1_3_0_pos 4
-#define	reg_ce_m1_3_0_len 4
-#define	reg_ce_m1_3_0_lsb 0
-#define xd_p_reg_ce_m1_11_4	0xABE3
-#define	reg_ce_m1_11_4_pos 0
-#define	reg_ce_m1_11_4_len 8
-#define	reg_ce_m1_11_4_lsb 4
-#define xd_p_reg_ce_rh0_7_0	0xABE4
-#define	reg_ce_rh0_7_0_pos 0
-#define	reg_ce_rh0_7_0_len 8
-#define	reg_ce_rh0_7_0_lsb 0
-#define xd_p_reg_ce_rh0_15_8	0xABE5
-#define	reg_ce_rh0_15_8_pos 0
-#define	reg_ce_rh0_15_8_len 8
-#define	reg_ce_rh0_15_8_lsb 8
-#define xd_p_reg_ce_rh0_23_16	0xABE6
-#define	reg_ce_rh0_23_16_pos 0
-#define	reg_ce_rh0_23_16_len 8
-#define	reg_ce_rh0_23_16_lsb 16
-#define xd_p_reg_ce_rh0_31_24	0xABE7
-#define	reg_ce_rh0_31_24_pos 0
-#define	reg_ce_rh0_31_24_len 8
-#define	reg_ce_rh0_31_24_lsb 24
-#define xd_p_reg_ce_rh3_real_7_0	0xABE8
-#define	reg_ce_rh3_real_7_0_pos 0
-#define	reg_ce_rh3_real_7_0_len 8
-#define	reg_ce_rh3_real_7_0_lsb 0
-#define xd_p_reg_ce_rh3_real_15_8	0xABE9
-#define	reg_ce_rh3_real_15_8_pos 0
-#define	reg_ce_rh3_real_15_8_len 8
-#define	reg_ce_rh3_real_15_8_lsb 8
-#define xd_p_reg_ce_rh3_real_23_16	0xABEA
-#define	reg_ce_rh3_real_23_16_pos 0
-#define	reg_ce_rh3_real_23_16_len 8
-#define	reg_ce_rh3_real_23_16_lsb 16
-#define xd_p_reg_ce_rh3_real_31_24	0xABEB
-#define	reg_ce_rh3_real_31_24_pos 0
-#define	reg_ce_rh3_real_31_24_len 8
-#define	reg_ce_rh3_real_31_24_lsb 24
-#define xd_p_reg_ce_rh3_imag_7_0	0xABEC
-#define	reg_ce_rh3_imag_7_0_pos 0
-#define	reg_ce_rh3_imag_7_0_len 8
-#define	reg_ce_rh3_imag_7_0_lsb 0
-#define xd_p_reg_ce_rh3_imag_15_8	0xABED
-#define	reg_ce_rh3_imag_15_8_pos 0
-#define	reg_ce_rh3_imag_15_8_len 8
-#define	reg_ce_rh3_imag_15_8_lsb 8
-#define xd_p_reg_ce_rh3_imag_23_16	0xABEE
-#define	reg_ce_rh3_imag_23_16_pos 0
-#define	reg_ce_rh3_imag_23_16_len 8
-#define	reg_ce_rh3_imag_23_16_lsb 16
-#define xd_p_reg_ce_rh3_imag_31_24	0xABEF
-#define	reg_ce_rh3_imag_31_24_pos 0
-#define	reg_ce_rh3_imag_31_24_len 8
-#define	reg_ce_rh3_imag_31_24_lsb 24
-#define xd_p_reg_feq_fix_eh2_7_0	0xABF0
-#define	reg_feq_fix_eh2_7_0_pos 0
-#define	reg_feq_fix_eh2_7_0_len 8
-#define	reg_feq_fix_eh2_7_0_lsb 0
-#define xd_p_reg_feq_fix_eh2_15_8	0xABF1
-#define	reg_feq_fix_eh2_15_8_pos 0
-#define	reg_feq_fix_eh2_15_8_len 8
-#define	reg_feq_fix_eh2_15_8_lsb 8
-#define xd_p_reg_feq_fix_eh2_23_16	0xABF2
-#define	reg_feq_fix_eh2_23_16_pos 0
-#define	reg_feq_fix_eh2_23_16_len 8
-#define	reg_feq_fix_eh2_23_16_lsb 16
-#define xd_p_reg_feq_fix_eh2_31_24	0xABF3
-#define	reg_feq_fix_eh2_31_24_pos 0
-#define	reg_feq_fix_eh2_31_24_len 8
-#define	reg_feq_fix_eh2_31_24_lsb 24
-#define xd_p_reg_ce_m2_central_7_0	0xABF4
-#define	reg_ce_m2_central_7_0_pos 0
-#define	reg_ce_m2_central_7_0_len 8
-#define	reg_ce_m2_central_7_0_lsb 0
-#define xd_p_reg_ce_m2_central_15_8	0xABF5
-#define	reg_ce_m2_central_15_8_pos 0
-#define	reg_ce_m2_central_15_8_len 8
-#define	reg_ce_m2_central_15_8_lsb 8
-#define xd_p_reg_ce_fftshift	0xABF6
-#define	reg_ce_fftshift_pos 0
-#define	reg_ce_fftshift_len 4
-#define	reg_ce_fftshift_lsb 0
-#define xd_p_reg_ce_fftshift1	0xABF6
-#define	reg_ce_fftshift1_pos 4
-#define	reg_ce_fftshift1_len 4
-#define	reg_ce_fftshift1_lsb 0
-#define xd_p_reg_ce_fftshift2	0xABF7
-#define	reg_ce_fftshift2_pos 0
-#define	reg_ce_fftshift2_len 4
-#define	reg_ce_fftshift2_lsb 0
-#define xd_p_reg_ce_top_mobile	0xABF7
-#define	reg_ce_top_mobile_pos 4
-#define	reg_ce_top_mobile_len 1
-#define	reg_ce_top_mobile_lsb 0
-#define xd_p_reg_strong_sginal_detected 0xA2BC
-#define reg_strong_sginal_detected_pos 2
-#define reg_strong_sginal_detected_len 1
-#define reg_strong_sginal_detected_lsb 0
-
-#define XD_MP2IF_BASE                           0xB000
-#define XD_MP2IF_CSR                        (0x00 + XD_MP2IF_BASE)
-#define XD_MP2IF_DMX_CTRL                       (0x03 + XD_MP2IF_BASE)
-#define XD_MP2IF_PID_IDX                        (0x04 + XD_MP2IF_BASE)
-#define XD_MP2IF_PID_DATA_L                     (0x05 + XD_MP2IF_BASE)
-#define XD_MP2IF_PID_DATA_H                     (0x06 + XD_MP2IF_BASE)
-#define XD_MP2IF_MISC                       (0x07 + XD_MP2IF_BASE)
-
-extern struct dvb_frontend *af9005_fe_attach(struct dvb_usb_device *d);
-extern int af9005_read_ofdm_register(struct dvb_usb_device *d, u16 reg,
-				     u8 * value);
-extern int af9005_read_ofdm_registers(struct dvb_usb_device *d, u16 reg,
-				      u8 * values, int len);
-extern int af9005_write_ofdm_register(struct dvb_usb_device *d, u16 reg,
-				      u8 value);
-extern int af9005_write_ofdm_registers(struct dvb_usb_device *d, u16 reg,
-				       u8 * values, int len);
-extern int af9005_read_tuner_registers(struct dvb_usb_device *d, u16 reg,
-				       u8 addr, u8 * values, int len);
-extern int af9005_write_tuner_registers(struct dvb_usb_device *d, u16 reg,
-					u8 * values, int len);
-extern int af9005_read_register_bits(struct dvb_usb_device *d, u16 reg,
-				     u8 pos, u8 len, u8 * value);
-extern int af9005_write_register_bits(struct dvb_usb_device *d, u16 reg,
-				      u8 pos, u8 len, u8 value);
-extern int af9005_send_command(struct dvb_usb_device *d, u8 command,
-			       u8 * wbuf, int wlen, u8 * rbuf, int rlen);
-extern int af9005_read_eeprom(struct dvb_usb_device *d, u8 address,
-			      u8 * values, int len);
-extern int af9005_tuner_attach(struct dvb_usb_adapter *adap);
-extern int af9005_led_control(struct dvb_usb_device *d, int onoff);
-
-extern u8 regmask[8];
-
-/* remote control decoder */
-extern int af9005_rc_decode(struct dvb_usb_device *d, u8 * data, int len,
-			    u32 * event, int *state);
-extern struct rc_map_table rc_map_af9005_table[];
-extern int rc_map_af9005_table_size;
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
deleted file mode 100644
index 677fed7..0000000
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ /dev/null
@@ -1,1952 +0,0 @@
-/*
- * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver
- *
- * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
- *
- * Thanks to Afatech who kindly provided information.
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/hash.h>
-#include <linux/slab.h>
-
-#include "af9015.h"
-#include "af9013.h"
-#include "mt2060.h"
-#include "qt1010.h"
-#include "tda18271.h"
-#include "mxl5005s.h"
-#include "mc44s803.h"
-#include "tda18218.h"
-#include "mxl5007t.h"
-
-static int dvb_usb_af9015_debug;
-module_param_named(debug, dvb_usb_af9015_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
-static int dvb_usb_af9015_remote;
-module_param_named(remote, dvb_usb_af9015_remote, int, 0644);
-MODULE_PARM_DESC(remote, "select remote");
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static DEFINE_MUTEX(af9015_usb_mutex);
-
-static struct af9015_config af9015_config;
-static struct dvb_usb_device_properties af9015_properties[3];
-static int af9015_properties_count = ARRAY_SIZE(af9015_properties);
-
-static struct af9013_config af9015_af9013_config[] = {
-	{
-		.i2c_addr = AF9015_I2C_DEMOD,
-		.ts_mode = AF9013_TS_USB,
-		.api_version = { 0, 1, 9, 0 },
-		.gpio[0] = AF9013_GPIO_HI,
-		.gpio[3] = AF9013_GPIO_TUNER_ON,
-
-	}, {
-		.ts_mode = AF9013_TS_SERIAL,
-		.api_version = { 0, 1, 9, 0 },
-		.gpio[0] = AF9013_GPIO_TUNER_ON,
-		.gpio[1] = AF9013_GPIO_LO,
-	}
-};
-
-static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
-{
-#define BUF_LEN 63
-#define REQ_HDR_LEN 8 /* send header size */
-#define ACK_HDR_LEN 2 /* rece header size */
-	int act_len, ret;
-	u8 buf[BUF_LEN];
-	u8 write = 1;
-	u8 msg_len = REQ_HDR_LEN;
-	static u8 seq; /* packet sequence number */
-
-	if (mutex_lock_interruptible(&af9015_usb_mutex) < 0)
-		return -EAGAIN;
-
-	buf[0] = req->cmd;
-	buf[1] = seq++;
-	buf[2] = req->i2c_addr;
-	buf[3] = req->addr >> 8;
-	buf[4] = req->addr & 0xff;
-	buf[5] = req->mbox;
-	buf[6] = req->addr_len;
-	buf[7] = req->data_len;
-
-	switch (req->cmd) {
-	case GET_CONFIG:
-	case READ_MEMORY:
-	case RECONNECT_USB:
-		write = 0;
-		break;
-	case READ_I2C:
-		write = 0;
-		buf[2] |= 0x01; /* set I2C direction */
-	case WRITE_I2C:
-		buf[0] = READ_WRITE_I2C;
-		break;
-	case WRITE_MEMORY:
-		if (((req->addr & 0xff00) == 0xff00) ||
-		    ((req->addr & 0xff00) == 0xae00))
-			buf[0] = WRITE_VIRTUAL_MEMORY;
-	case WRITE_VIRTUAL_MEMORY:
-	case COPY_FIRMWARE:
-	case DOWNLOAD_FIRMWARE:
-	case BOOT:
-		break;
-	default:
-		err("unknown command:%d", req->cmd);
-		ret = -1;
-		goto error_unlock;
-	}
-
-	/* buffer overflow check */
-	if ((write && (req->data_len > BUF_LEN - REQ_HDR_LEN)) ||
-		(!write && (req->data_len > BUF_LEN - ACK_HDR_LEN))) {
-		err("too much data; cmd:%d len:%d", req->cmd, req->data_len);
-		ret = -EINVAL;
-		goto error_unlock;
-	}
-
-	/* write requested */
-	if (write) {
-		memcpy(&buf[REQ_HDR_LEN], req->data, req->data_len);
-		msg_len += req->data_len;
-	}
-
-	deb_xfer(">>> ");
-	debug_dump(buf, msg_len, deb_xfer);
-
-	/* send req */
-	ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x02), buf, msg_len,
-		&act_len, AF9015_USB_TIMEOUT);
-	if (ret)
-		err("bulk message failed:%d (%d/%d)", ret, msg_len, act_len);
-	else
-		if (act_len != msg_len)
-			ret = -1; /* all data is not send */
-	if (ret)
-		goto error_unlock;
-
-	/* no ack for those packets */
-	if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB)
-		goto exit_unlock;
-
-	/* write receives seq + status = 2 bytes
-	   read receives seq + status + data = 2 + N bytes */
-	msg_len = ACK_HDR_LEN;
-	if (!write)
-		msg_len += req->data_len;
-
-	ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, 0x81), buf, msg_len,
-		&act_len, AF9015_USB_TIMEOUT);
-	if (ret) {
-		err("recv bulk message failed:%d", ret);
-		ret = -1;
-		goto error_unlock;
-	}
-
-	deb_xfer("<<< ");
-	debug_dump(buf, act_len, deb_xfer);
-
-	/* check status */
-	if (buf[1]) {
-		err("command failed:%d", buf[1]);
-		ret = -1;
-		goto error_unlock;
-	}
-
-	/* read request, copy returned data to return buf */
-	if (!write)
-		memcpy(req->data, &buf[ACK_HDR_LEN], req->data_len);
-
-error_unlock:
-exit_unlock:
-	mutex_unlock(&af9015_usb_mutex);
-
-	return ret;
-}
-
-static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req)
-{
-	return af9015_rw_udev(d->udev, req);
-}
-
-static int af9015_write_regs(struct dvb_usb_device *d, u16 addr, u8 *val,
-	u8 len)
-{
-	struct req_t req = {WRITE_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len,
-		val};
-	return af9015_ctrl_msg(d, &req);
-}
-
-static int af9015_write_reg(struct dvb_usb_device *d, u16 addr, u8 val)
-{
-	return af9015_write_regs(d, addr, &val, 1);
-}
-
-static int af9015_read_regs(struct dvb_usb_device *d, u16 addr, u8 *val, u8 len)
-{
-	struct req_t req = {READ_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len,
-		val};
-	return af9015_ctrl_msg(d, &req);
-}
-
-static int af9015_read_reg(struct dvb_usb_device *d, u16 addr, u8 *val)
-{
-	return af9015_read_regs(d, addr, val, 1);
-}
-
-static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg,
-	u8 val)
-{
-	struct req_t req = {WRITE_I2C, addr, reg, 1, 1, 1, &val};
-
-	if (addr == af9015_af9013_config[0].i2c_addr ||
-	    addr == af9015_af9013_config[1].i2c_addr)
-		req.addr_len = 3;
-
-	return af9015_ctrl_msg(d, &req);
-}
-
-static int af9015_read_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg,
-	u8 *val)
-{
-	struct req_t req = {READ_I2C, addr, reg, 0, 1, 1, val};
-
-	if (addr == af9015_af9013_config[0].i2c_addr ||
-	    addr == af9015_af9013_config[1].i2c_addr)
-		req.addr_len = 3;
-
-	return af9015_ctrl_msg(d, &req);
-}
-
-static int af9015_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
-	int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	int ret = 0, i = 0;
-	u16 addr;
-	u8 uninitialized_var(mbox), addr_len;
-	struct req_t req;
-
-/*
-The bus lock is needed because there is two tuners both using same I2C-address.
-Due to that the only way to select correct tuner is use demodulator I2C-gate.
-
-................................................
-. AF9015 includes integrated AF9013 demodulator.
-. ____________                   ____________  .                ____________
-.|     uC     |                 |   demod    | .               |    tuner   |
-.|------------|                 |------------| .               |------------|
-.|   AF9015   |                 |  AF9013/5  | .               |   MXL5003  |
-.|            |--+----I2C-------|-----/ -----|-.-----I2C-------|            |
-.|            |  |              | addr 0x38  | .               |  addr 0xc6 |
-.|____________|  |              |____________| .               |____________|
-.................|..............................
-		 |               ____________                   ____________
-		 |              |   demod    |                 |    tuner   |
-		 |              |------------|                 |------------|
-		 |              |   AF9013   |                 |   MXL5003  |
-		 +----I2C-------|-----/ -----|-------I2C-------|            |
-				| addr 0x3a  |                 |  addr 0xc6 |
-				|____________|                 |____________|
-*/
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	while (i < num) {
-		if (msg[i].addr == af9015_af9013_config[0].i2c_addr ||
-		    msg[i].addr == af9015_af9013_config[1].i2c_addr) {
-			addr = msg[i].buf[0] << 8;
-			addr += msg[i].buf[1];
-			mbox = msg[i].buf[2];
-			addr_len = 3;
-		} else {
-			addr = msg[i].buf[0];
-			addr_len = 1;
-			/* mbox is don't care in that case */
-		}
-
-		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
-			if (msg[i].len > 3 || msg[i+1].len > 61) {
-				ret = -EOPNOTSUPP;
-				goto error;
-			}
-			if (msg[i].addr == af9015_af9013_config[0].i2c_addr)
-				req.cmd = READ_MEMORY;
-			else
-				req.cmd = READ_I2C;
-			req.i2c_addr = msg[i].addr;
-			req.addr = addr;
-			req.mbox = mbox;
-			req.addr_len = addr_len;
-			req.data_len = msg[i+1].len;
-			req.data = &msg[i+1].buf[0];
-			ret = af9015_ctrl_msg(d, &req);
-			i += 2;
-		} else if (msg[i].flags & I2C_M_RD) {
-			if (msg[i].len > 61) {
-				ret = -EOPNOTSUPP;
-				goto error;
-			}
-			if (msg[i].addr ==
-				af9015_af9013_config[0].i2c_addr) {
-				ret = -EINVAL;
-				goto error;
-			}
-			req.cmd = READ_I2C;
-			req.i2c_addr = msg[i].addr;
-			req.addr = addr;
-			req.mbox = mbox;
-			req.addr_len = addr_len;
-			req.data_len = msg[i].len;
-			req.data = &msg[i].buf[0];
-			ret = af9015_ctrl_msg(d, &req);
-			i += 1;
-		} else {
-			if (msg[i].len > 21) {
-				ret = -EOPNOTSUPP;
-				goto error;
-			}
-			if (msg[i].addr == af9015_af9013_config[0].i2c_addr)
-				req.cmd = WRITE_MEMORY;
-			else
-				req.cmd = WRITE_I2C;
-			req.i2c_addr = msg[i].addr;
-			req.addr = addr;
-			req.mbox = mbox;
-			req.addr_len = addr_len;
-			req.data_len = msg[i].len-addr_len;
-			req.data = &msg[i].buf[addr_len];
-			ret = af9015_ctrl_msg(d, &req);
-			i += 1;
-		}
-		if (ret)
-			goto error;
-
-	}
-	ret = i;
-
-error:
-	mutex_unlock(&d->i2c_mutex);
-
-	return ret;
-}
-
-static u32 af9015_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm af9015_i2c_algo = {
-	.master_xfer = af9015_i2c_xfer,
-	.functionality = af9015_i2c_func,
-};
-
-static int af9015_do_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit, u8 op)
-{
-	int ret;
-	u8 val, mask = 0x01;
-
-	ret = af9015_read_reg(d, addr, &val);
-	if (ret)
-		return ret;
-
-	mask <<= bit;
-	if (op) {
-		/* set bit */
-		val |= mask;
-	} else {
-		/* clear bit */
-		mask ^= 0xff;
-		val &= mask;
-	}
-
-	return af9015_write_reg(d, addr, val);
-}
-
-static int af9015_set_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit)
-{
-	return af9015_do_reg_bit(d, addr, bit, 1);
-}
-
-static int af9015_clear_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit)
-{
-	return af9015_do_reg_bit(d, addr, bit, 0);
-}
-
-static int af9015_init_endpoint(struct dvb_usb_device *d)
-{
-	int ret;
-	u16 frame_size;
-	u8  packet_size;
-	deb_info("%s: USB speed:%d\n", __func__, d->udev->speed);
-
-	/* Windows driver uses packet count 21 for USB1.1 and 348 for USB2.0.
-	   We use smaller - about 1/4 from the original, 5 and 87. */
-#define TS_PACKET_SIZE            188
-
-#define TS_USB20_PACKET_COUNT      87
-#define TS_USB20_FRAME_SIZE       (TS_PACKET_SIZE*TS_USB20_PACKET_COUNT)
-
-#define TS_USB11_PACKET_COUNT       5
-#define TS_USB11_FRAME_SIZE       (TS_PACKET_SIZE*TS_USB11_PACKET_COUNT)
-
-#define TS_USB20_MAX_PACKET_SIZE  512
-#define TS_USB11_MAX_PACKET_SIZE   64
-
-	if (d->udev->speed == USB_SPEED_FULL) {
-		frame_size = TS_USB11_FRAME_SIZE/4;
-		packet_size = TS_USB11_MAX_PACKET_SIZE/4;
-	} else {
-		frame_size = TS_USB20_FRAME_SIZE/4;
-		packet_size = TS_USB20_MAX_PACKET_SIZE/4;
-	}
-
-	ret = af9015_set_reg_bit(d, 0xd507, 2); /* assert EP4 reset */
-	if (ret)
-		goto error;
-	ret = af9015_set_reg_bit(d, 0xd50b, 1); /* assert EP5 reset */
-	if (ret)
-		goto error;
-	ret = af9015_clear_reg_bit(d, 0xdd11, 5); /* disable EP4 */
-	if (ret)
-		goto error;
-	ret = af9015_clear_reg_bit(d, 0xdd11, 6); /* disable EP5 */
-	if (ret)
-		goto error;
-	ret = af9015_set_reg_bit(d, 0xdd11, 5); /* enable EP4 */
-	if (ret)
-		goto error;
-	if (af9015_config.dual_mode) {
-		ret = af9015_set_reg_bit(d, 0xdd11, 6); /* enable EP5 */
-		if (ret)
-			goto error;
-	}
-	ret = af9015_clear_reg_bit(d, 0xdd13, 5); /* disable EP4 NAK */
-	if (ret)
-		goto error;
-	if (af9015_config.dual_mode) {
-		ret = af9015_clear_reg_bit(d, 0xdd13, 6); /* disable EP5 NAK */
-		if (ret)
-			goto error;
-	}
-	/* EP4 xfer length */
-	ret = af9015_write_reg(d, 0xdd88, frame_size & 0xff);
-	if (ret)
-		goto error;
-	ret = af9015_write_reg(d, 0xdd89, frame_size >> 8);
-	if (ret)
-		goto error;
-	/* EP5 xfer length */
-	ret = af9015_write_reg(d, 0xdd8a, frame_size & 0xff);
-	if (ret)
-		goto error;
-	ret = af9015_write_reg(d, 0xdd8b, frame_size >> 8);
-	if (ret)
-		goto error;
-	ret = af9015_write_reg(d, 0xdd0c, packet_size); /* EP4 packet size */
-	if (ret)
-		goto error;
-	ret = af9015_write_reg(d, 0xdd0d, packet_size); /* EP5 packet size */
-	if (ret)
-		goto error;
-	ret = af9015_clear_reg_bit(d, 0xd507, 2); /* negate EP4 reset */
-	if (ret)
-		goto error;
-	if (af9015_config.dual_mode) {
-		ret = af9015_clear_reg_bit(d, 0xd50b, 1); /* negate EP5 reset */
-		if (ret)
-			goto error;
-	}
-
-	/* enable / disable mp2if2 */
-	if (af9015_config.dual_mode)
-		ret = af9015_set_reg_bit(d, 0xd50b, 0);
-	else
-		ret = af9015_clear_reg_bit(d, 0xd50b, 0);
-
-error:
-	if (ret)
-		err("endpoint init failed:%d", ret);
-	return ret;
-}
-
-static int af9015_copy_firmware(struct dvb_usb_device *d)
-{
-	int ret;
-	u8 fw_params[4];
-	u8 val, i;
-	struct req_t req = {COPY_FIRMWARE, 0, 0x5100, 0, 0, sizeof(fw_params),
-		fw_params };
-	deb_info("%s:\n", __func__);
-
-	fw_params[0] = af9015_config.firmware_size >> 8;
-	fw_params[1] = af9015_config.firmware_size & 0xff;
-	fw_params[2] = af9015_config.firmware_checksum >> 8;
-	fw_params[3] = af9015_config.firmware_checksum & 0xff;
-
-	/* wait 2nd demodulator ready */
-	msleep(100);
-
-	ret = af9015_read_reg_i2c(d,
-		af9015_af9013_config[1].i2c_addr, 0x98be, &val);
-	if (ret)
-		goto error;
-	else
-		deb_info("%s: firmware status:%02x\n", __func__, val);
-
-	if (val == 0x0c) /* fw is running, no need for download */
-		goto exit;
-
-	/* set I2C master clock to fast (to speed up firmware copy) */
-	ret = af9015_write_reg(d, 0xd416, 0x04); /* 0x04 * 400ns */
-	if (ret)
-		goto error;
-
-	msleep(50);
-
-	/* copy firmware */
-	ret = af9015_ctrl_msg(d, &req);
-	if (ret)
-		err("firmware copy cmd failed:%d", ret);
-	deb_info("%s: firmware copy done\n", __func__);
-
-	/* set I2C master clock back to normal */
-	ret = af9015_write_reg(d, 0xd416, 0x14); /* 0x14 * 400ns */
-	if (ret)
-		goto error;
-
-	/* request boot firmware */
-	ret = af9015_write_reg_i2c(d, af9015_af9013_config[1].i2c_addr,
-		0xe205, 1);
-	deb_info("%s: firmware boot cmd status:%d\n", __func__, ret);
-	if (ret)
-		goto error;
-
-	for (i = 0; i < 15; i++) {
-		msleep(100);
-
-		/* check firmware status */
-		ret = af9015_read_reg_i2c(d,
-			af9015_af9013_config[1].i2c_addr, 0x98be, &val);
-		deb_info("%s: firmware status cmd status:%d fw status:%02x\n",
-			__func__, ret, val);
-		if (ret)
-			goto error;
-
-		if (val == 0x0c || val == 0x04) /* success or fail */
-			break;
-	}
-
-	if (val == 0x04) {
-		err("firmware did not run");
-		ret = -1;
-	} else if (val != 0x0c) {
-		err("firmware boot timeout");
-		ret = -1;
-	}
-
-error:
-exit:
-	return ret;
-}
-
-/* hash (and dump) eeprom */
-static int af9015_eeprom_hash(struct usb_device *udev)
-{
-	static const unsigned int eeprom_size = 256;
-	unsigned int reg;
-	int ret;
-	u8 val, *eeprom;
-	struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
-
-	eeprom = kmalloc(eeprom_size, GFP_KERNEL);
-	if (eeprom == NULL)
-		return -ENOMEM;
-
-	for (reg = 0; reg < eeprom_size; reg++) {
-		req.addr = reg;
-		ret = af9015_rw_udev(udev, &req);
-		if (ret)
-			goto free;
-		eeprom[reg] = val;
-	}
-
-	if (dvb_usb_af9015_debug & 0x01)
-		print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, eeprom,
-				eeprom_size);
-
-	BUG_ON(eeprom_size % 4);
-
-	af9015_config.eeprom_sum = 0;
-	for (reg = 0; reg < eeprom_size / sizeof(u32); reg++) {
-		af9015_config.eeprom_sum *= GOLDEN_RATIO_PRIME_32;
-		af9015_config.eeprom_sum += le32_to_cpu(((u32 *)eeprom)[reg]);
-	}
-
-	deb_info("%s: eeprom sum=%.8x\n", __func__, af9015_config.eeprom_sum);
-
-	ret = 0;
-free:
-	kfree(eeprom);
-	return ret;
-}
-
-static int af9015_init(struct dvb_usb_device *d)
-{
-	int ret;
-	deb_info("%s:\n", __func__);
-
-	/* init RC canary */
-	ret = af9015_write_reg(d, 0x98e9, 0xff);
-	if (ret)
-		goto error;
-
-	ret = af9015_init_endpoint(d);
-	if (ret)
-		goto error;
-
-error:
-	return ret;
-}
-
-static int af9015_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	int ret;
-	deb_info("%s: onoff:%d\n", __func__, onoff);
-
-	if (onoff)
-		ret = af9015_set_reg_bit(adap->dev, 0xd503, 0);
-	else
-		ret = af9015_clear_reg_bit(adap->dev, 0xd503, 0);
-
-	return ret;
-}
-
-static int af9015_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
-	int onoff)
-{
-	int ret;
-	u8 idx;
-
-	deb_info("%s: set pid filter, index %d, pid %x, onoff %d\n",
-		__func__, index, pid, onoff);
-
-	ret = af9015_write_reg(adap->dev, 0xd505, (pid & 0xff));
-	if (ret)
-		goto error;
-
-	ret = af9015_write_reg(adap->dev, 0xd506, (pid >> 8));
-	if (ret)
-		goto error;
-
-	idx = ((index & 0x1f) | (1 << 5));
-	ret = af9015_write_reg(adap->dev, 0xd504, idx);
-
-error:
-	return ret;
-}
-
-static int af9015_download_firmware(struct usb_device *udev,
-	const struct firmware *fw)
-{
-	int i, len, remaining, ret;
-	struct req_t req = {DOWNLOAD_FIRMWARE, 0, 0, 0, 0, 0, NULL};
-	u16 checksum = 0;
-
-	deb_info("%s:\n", __func__);
-
-	/* calc checksum */
-	for (i = 0; i < fw->size; i++)
-		checksum += fw->data[i];
-
-	af9015_config.firmware_size = fw->size;
-	af9015_config.firmware_checksum = checksum;
-
-	#define FW_ADDR 0x5100 /* firmware start address */
-	#define LEN_MAX 55 /* max packet size */
-	for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) {
-		len = remaining;
-		if (len > LEN_MAX)
-			len = LEN_MAX;
-
-		req.data_len = len;
-		req.data = (u8 *) &fw->data[fw->size - remaining];
-		req.addr = FW_ADDR + fw->size - remaining;
-
-		ret = af9015_rw_udev(udev, &req);
-		if (ret) {
-			err("firmware download failed:%d", ret);
-			goto error;
-		}
-	}
-
-	/* firmware loaded, request boot */
-	req.cmd = BOOT;
-	ret = af9015_rw_udev(udev, &req);
-	if (ret) {
-		err("firmware boot failed:%d", ret);
-		goto error;
-	}
-
-error:
-	return ret;
-}
-
-struct af9015_rc_setup {
-	unsigned int id;
-	char *rc_codes;
-};
-
-static char *af9015_rc_setup_match(unsigned int id,
-	const struct af9015_rc_setup *table)
-{
-	for (; table->rc_codes; table++)
-		if (table->id == id)
-			return table->rc_codes;
-	return NULL;
-}
-
-static const struct af9015_rc_setup af9015_rc_setup_modparam[] = {
-	{ AF9015_REMOTE_A_LINK_DTU_M, RC_MAP_ALINK_DTU_M },
-	{ AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, RC_MAP_MSI_DIGIVOX_II },
-	{ AF9015_REMOTE_MYGICTV_U718, RC_MAP_TOTAL_MEDIA_IN_HAND },
-	{ AF9015_REMOTE_DIGITTRADE_DVB_T, RC_MAP_DIGITTRADE },
-	{ AF9015_REMOTE_AVERMEDIA_KS, RC_MAP_AVERMEDIA_RM_KS },
-	{ }
-};
-
-static const struct af9015_rc_setup af9015_rc_setup_hashes[] = {
-	{ 0xb8feb708, RC_MAP_MSI_DIGIVOX_II },
-	{ 0xa3703d00, RC_MAP_ALINK_DTU_M },
-	{ 0x9b7dc64e, RC_MAP_TOTAL_MEDIA_IN_HAND }, /* MYGICTV U718 */
-	{ 0x5d49e3db, RC_MAP_DIGITTRADE }, /* LC-Power LC-USB-DVBT */
-	{ }
-};
-
-static const struct af9015_rc_setup af9015_rc_setup_usbids[] = {
-	{ (USB_VID_TERRATEC << 16) | USB_PID_TERRATEC_CINERGY_T_STICK_RC,
-		RC_MAP_TERRATEC_SLIM_2 },
-	{ (USB_VID_TERRATEC << 16) | USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC,
-		RC_MAP_TERRATEC_SLIM },
-	{ (USB_VID_VISIONPLUS << 16) | USB_PID_AZUREWAVE_AD_TU700,
-		RC_MAP_AZUREWAVE_AD_TU700 },
-	{ (USB_VID_VISIONPLUS << 16) | USB_PID_TINYTWIN,
-		RC_MAP_AZUREWAVE_AD_TU700 },
-	{ (USB_VID_MSI_2 << 16) | USB_PID_MSI_DIGI_VOX_MINI_III,
-		RC_MAP_MSI_DIGIVOX_III },
-	{ (USB_VID_MSI_2 << 16) | USB_PID_MSI_DIGIVOX_DUO,
-		RC_MAP_MSI_DIGIVOX_III },
-	{ (USB_VID_LEADTEK << 16) | USB_PID_WINFAST_DTV_DONGLE_GOLD,
-		RC_MAP_LEADTEK_Y04G0051 },
-	{ (USB_VID_LEADTEK << 16) | USB_PID_WINFAST_DTV2000DS,
-		RC_MAP_LEADTEK_Y04G0051 },
-	{ (USB_VID_AVERMEDIA << 16) | USB_PID_AVERMEDIA_VOLAR_X,
-		RC_MAP_AVERMEDIA_M135A },
-	{ (USB_VID_AFATECH << 16) | USB_PID_TREKSTOR_DVBT,
-		RC_MAP_TREKSTOR },
-	{ (USB_VID_KWORLD_2 << 16) | USB_PID_TINYTWIN_2,
-		RC_MAP_DIGITALNOW_TINYTWIN },
-	{ (USB_VID_GTEK << 16) | USB_PID_TINYTWIN_3,
-		RC_MAP_DIGITALNOW_TINYTWIN },
-	{ (USB_VID_KWORLD_2 << 16) | USB_PID_SVEON_STV22,
-		RC_MAP_MSI_DIGIVOX_III },
-	{ }
-};
-
-static void af9015_set_remote_config(struct usb_device *udev,
-		struct dvb_usb_device_properties *props)
-{
-	u16 vid = le16_to_cpu(udev->descriptor.idVendor);
-	u16 pid = le16_to_cpu(udev->descriptor.idProduct);
-
-	/* try to load remote based module param */
-	props->rc.core.rc_codes = af9015_rc_setup_match(
-		dvb_usb_af9015_remote, af9015_rc_setup_modparam);
-
-	/* try to load remote based eeprom hash */
-	if (!props->rc.core.rc_codes)
-		props->rc.core.rc_codes = af9015_rc_setup_match(
-			af9015_config.eeprom_sum, af9015_rc_setup_hashes);
-
-	/* try to load remote based USB ID */
-	if (!props->rc.core.rc_codes)
-		props->rc.core.rc_codes = af9015_rc_setup_match(
-			(vid << 16) | pid, af9015_rc_setup_usbids);
-
-	/* try to load remote based USB iManufacturer string */
-	if (!props->rc.core.rc_codes && vid == USB_VID_AFATECH) {
-		/* Check USB manufacturer and product strings and try
-		   to determine correct remote in case of chip vendor
-		   reference IDs are used.
-		   DO NOT ADD ANYTHING NEW HERE. Use hashes instead. */
-		char manufacturer[10];
-		memset(manufacturer, 0, sizeof(manufacturer));
-		usb_string(udev, udev->descriptor.iManufacturer,
-			manufacturer, sizeof(manufacturer));
-		if (!strcmp("MSI", manufacturer)) {
-			/* iManufacturer 1 MSI
-			   iProduct      2 MSI K-VOX */
-			props->rc.core.rc_codes = af9015_rc_setup_match(
-				AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
-				af9015_rc_setup_modparam);
-		}
-	}
-
-	/* finally load "empty" just for leaving IR receiver enabled */
-	if (!props->rc.core.rc_codes)
-		props->rc.core.rc_codes = RC_MAP_EMPTY;
-
-	return;
-}
-
-static int af9015_read_config(struct usb_device *udev)
-{
-	int ret;
-	u8 val, i, offset = 0;
-	struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
-
-	/* IR remote controller */
-	req.addr = AF9015_EEPROM_IR_MODE;
-	/* first message will timeout often due to possible hw bug */
-	for (i = 0; i < 4; i++) {
-		ret = af9015_rw_udev(udev, &req);
-		if (!ret)
-			break;
-	}
-	if (ret)
-		goto error;
-
-	ret = af9015_eeprom_hash(udev);
-	if (ret)
-		goto error;
-
-	deb_info("%s: IR mode=%d\n", __func__, val);
-	for (i = 0; i < af9015_properties_count; i++) {
-		if (val == AF9015_IR_MODE_DISABLED)
-			af9015_properties[i].rc.core.rc_codes = NULL;
-		else
-			af9015_set_remote_config(udev, &af9015_properties[i]);
-	}
-
-	/* TS mode - one or two receivers */
-	req.addr = AF9015_EEPROM_TS_MODE;
-	ret = af9015_rw_udev(udev, &req);
-	if (ret)
-		goto error;
-	af9015_config.dual_mode = val;
-	deb_info("%s: TS mode=%d\n", __func__, af9015_config.dual_mode);
-
-	/* Set adapter0 buffer size according to USB port speed, adapter1 buffer
-	   size can be static because it is enabled only USB2.0 */
-	for (i = 0; i < af9015_properties_count; i++) {
-		/* USB1.1 set smaller buffersize and disable 2nd adapter */
-		if (udev->speed == USB_SPEED_FULL) {
-			af9015_properties[i].adapter[0].fe[0].stream.u.bulk.buffersize
-				= TS_USB11_FRAME_SIZE;
-			/* disable 2nd adapter because we don't have
-			   PID-filters */
-			af9015_config.dual_mode = 0;
-		} else {
-			af9015_properties[i].adapter[0].fe[0].stream.u.bulk.buffersize
-				= TS_USB20_FRAME_SIZE;
-		}
-	}
-
-	if (af9015_config.dual_mode) {
-		/* read 2nd demodulator I2C address */
-		req.addr = AF9015_EEPROM_DEMOD2_I2C;
-		ret = af9015_rw_udev(udev, &req);
-		if (ret)
-			goto error;
-		af9015_af9013_config[1].i2c_addr = val;
-
-		/* enable 2nd adapter */
-		for (i = 0; i < af9015_properties_count; i++)
-			af9015_properties[i].num_adapters = 2;
-
-	} else {
-		 /* disable 2nd adapter */
-		for (i = 0; i < af9015_properties_count; i++)
-			af9015_properties[i].num_adapters = 1;
-	}
-
-	for (i = 0; i < af9015_properties[0].num_adapters; i++) {
-		if (i == 1)
-			offset = AF9015_EEPROM_OFFSET;
-		/* xtal */
-		req.addr = AF9015_EEPROM_XTAL_TYPE1 + offset;
-		ret = af9015_rw_udev(udev, &req);
-		if (ret)
-			goto error;
-		switch (val) {
-		case 0:
-			af9015_af9013_config[i].clock = 28800000;
-			break;
-		case 1:
-			af9015_af9013_config[i].clock = 20480000;
-			break;
-		case 2:
-			af9015_af9013_config[i].clock = 28000000;
-			break;
-		case 3:
-			af9015_af9013_config[i].clock = 25000000;
-			break;
-		};
-		deb_info("%s: [%d] xtal=%d set clock=%d\n", __func__, i,
-			val, af9015_af9013_config[i].clock);
-
-		/* IF frequency */
-		req.addr = AF9015_EEPROM_IF1H + offset;
-		ret = af9015_rw_udev(udev, &req);
-		if (ret)
-			goto error;
-
-		af9015_af9013_config[i].if_frequency = val << 8;
-
-		req.addr = AF9015_EEPROM_IF1L + offset;
-		ret = af9015_rw_udev(udev, &req);
-		if (ret)
-			goto error;
-
-		af9015_af9013_config[i].if_frequency += val;
-		af9015_af9013_config[i].if_frequency *= 1000;
-		deb_info("%s: [%d] IF frequency=%d\n", __func__, i,
-			af9015_af9013_config[0].if_frequency);
-
-		/* MT2060 IF1 */
-		req.addr = AF9015_EEPROM_MT2060_IF1H  + offset;
-		ret = af9015_rw_udev(udev, &req);
-		if (ret)
-			goto error;
-		af9015_config.mt2060_if1[i] = val << 8;
-		req.addr = AF9015_EEPROM_MT2060_IF1L + offset;
-		ret = af9015_rw_udev(udev, &req);
-		if (ret)
-			goto error;
-		af9015_config.mt2060_if1[i] += val;
-		deb_info("%s: [%d] MT2060 IF1=%d\n", __func__, i,
-			af9015_config.mt2060_if1[i]);
-
-		/* tuner */
-		req.addr =  AF9015_EEPROM_TUNER_ID1 + offset;
-		ret = af9015_rw_udev(udev, &req);
-		if (ret)
-			goto error;
-		switch (val) {
-		case AF9013_TUNER_ENV77H11D5:
-		case AF9013_TUNER_MT2060:
-		case AF9013_TUNER_QT1010:
-		case AF9013_TUNER_UNKNOWN:
-		case AF9013_TUNER_MT2060_2:
-		case AF9013_TUNER_TDA18271:
-		case AF9013_TUNER_QT1010A:
-		case AF9013_TUNER_TDA18218:
-			af9015_af9013_config[i].spec_inv = 1;
-			break;
-		case AF9013_TUNER_MXL5003D:
-		case AF9013_TUNER_MXL5005D:
-		case AF9013_TUNER_MXL5005R:
-		case AF9013_TUNER_MXL5007T:
-			af9015_af9013_config[i].spec_inv = 0;
-			break;
-		case AF9013_TUNER_MC44S803:
-			af9015_af9013_config[i].gpio[1] = AF9013_GPIO_LO;
-			af9015_af9013_config[i].spec_inv = 1;
-			break;
-		default:
-			warn("tuner id=%d not supported, please report!", val);
-			return -ENODEV;
-		};
-
-		af9015_af9013_config[i].tuner = val;
-		deb_info("%s: [%d] tuner id=%d\n", __func__, i, val);
-	}
-
-error:
-	if (ret)
-		err("eeprom read failed=%d", ret);
-
-	/* AverMedia AVerTV Volar Black HD (A850) device have bad EEPROM
-	   content :-( Override some wrong values here. Ditto for the
-	   AVerTV Red HD+ (A850T) device. */
-	if (le16_to_cpu(udev->descriptor.idVendor) == USB_VID_AVERMEDIA &&
-		((le16_to_cpu(udev->descriptor.idProduct) ==
-			USB_PID_AVERMEDIA_A850) ||
-		(le16_to_cpu(udev->descriptor.idProduct) ==
-			USB_PID_AVERMEDIA_A850T))) {
-		deb_info("%s: AverMedia A850: overriding config\n", __func__);
-		/* disable dual mode */
-		af9015_config.dual_mode = 0;
-		 /* disable 2nd adapter */
-		for (i = 0; i < af9015_properties_count; i++)
-			af9015_properties[i].num_adapters = 1;
-
-		/* set correct IF */
-		af9015_af9013_config[0].if_frequency = 4570000;
-	}
-
-	return ret;
-}
-
-static int af9015_identify_state(struct usb_device *udev,
-				 struct dvb_usb_device_properties *props,
-				 struct dvb_usb_device_description **desc,
-				 int *cold)
-{
-	int ret;
-	u8 reply;
-	struct req_t req = {GET_CONFIG, 0, 0, 0, 0, 1, &reply};
-
-	ret = af9015_rw_udev(udev, &req);
-	if (ret)
-		return ret;
-
-	deb_info("%s: reply:%02x\n", __func__, reply);
-	if (reply == 0x02)
-		*cold = 0;
-	else
-		*cold = 1;
-
-	return ret;
-}
-
-static int af9015_rc_query(struct dvb_usb_device *d)
-{
-	struct af9015_state *priv = d->priv;
-	int ret;
-	u8 buf[17];
-
-	/* read registers needed to detect remote controller code */
-	ret = af9015_read_regs(d, 0x98d9, buf, sizeof(buf));
-	if (ret)
-		goto error;
-
-	/* If any of these are non-zero, assume invalid data */
-	if (buf[1] || buf[2] || buf[3])
-		return ret;
-
-	/* Check for repeat of previous code */
-	if ((priv->rc_repeat != buf[6] || buf[0]) &&
-					!memcmp(&buf[12], priv->rc_last, 4)) {
-		deb_rc("%s: key repeated\n", __func__);
-		rc_keydown(d->rc_dev, priv->rc_keycode, 0);
-		priv->rc_repeat = buf[6];
-		return ret;
-	}
-
-	/* Only process key if canary killed */
-	if (buf[16] != 0xff && buf[0] != 0x01) {
-		deb_rc("%s: key pressed %02x %02x %02x %02x\n", __func__,
-			buf[12], buf[13], buf[14], buf[15]);
-
-		/* Reset the canary */
-		ret = af9015_write_reg(d, 0x98e9, 0xff);
-		if (ret)
-			goto error;
-
-		/* Remember this key */
-		memcpy(priv->rc_last, &buf[12], 4);
-		if (buf[14] == (u8) ~buf[15]) {
-			if (buf[12] == (u8) ~buf[13]) {
-				/* NEC */
-				priv->rc_keycode = buf[12] << 8 | buf[14];
-			} else {
-				/* NEC extended*/
-				priv->rc_keycode = buf[12] << 16 |
-					buf[13] << 8 | buf[14];
-			}
-		} else {
-			/* 32 bit NEC */
-			priv->rc_keycode = buf[12] << 24 | buf[13] << 16 |
-					buf[14] << 8 | buf[15];
-		}
-		rc_keydown(d->rc_dev, priv->rc_keycode, 0);
-	} else {
-		deb_rc("%s: no key press\n", __func__);
-		/* Invalidate last keypress */
-		/* Not really needed, but helps with debug */
-		priv->rc_last[2] = priv->rc_last[3];
-	}
-
-	priv->rc_repeat = buf[6];
-
-error:
-	if (ret)
-		err("%s: failed:%d", __func__, ret);
-
-	return ret;
-}
-
-/* override demod callbacks for resource locking */
-static int af9015_af9013_set_frontend(struct dvb_frontend *fe)
-{
-	int ret;
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct af9015_state *priv = adap->dev->priv;
-
-	if (mutex_lock_interruptible(&adap->dev->usb_mutex))
-		return -EAGAIN;
-
-	ret = priv->set_frontend[adap->id](fe);
-
-	mutex_unlock(&adap->dev->usb_mutex);
-
-	return ret;
-}
-
-/* override demod callbacks for resource locking */
-static int af9015_af9013_read_status(struct dvb_frontend *fe,
-	fe_status_t *status)
-{
-	int ret;
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct af9015_state *priv = adap->dev->priv;
-
-	if (mutex_lock_interruptible(&adap->dev->usb_mutex))
-		return -EAGAIN;
-
-	ret = priv->read_status[adap->id](fe, status);
-
-	mutex_unlock(&adap->dev->usb_mutex);
-
-	return ret;
-}
-
-/* override demod callbacks for resource locking */
-static int af9015_af9013_init(struct dvb_frontend *fe)
-{
-	int ret;
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct af9015_state *priv = adap->dev->priv;
-
-	if (mutex_lock_interruptible(&adap->dev->usb_mutex))
-		return -EAGAIN;
-
-	ret = priv->init[adap->id](fe);
-
-	mutex_unlock(&adap->dev->usb_mutex);
-
-	return ret;
-}
-
-/* override demod callbacks for resource locking */
-static int af9015_af9013_sleep(struct dvb_frontend *fe)
-{
-	int ret;
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct af9015_state *priv = adap->dev->priv;
-
-	if (mutex_lock_interruptible(&adap->dev->usb_mutex))
-		return -EAGAIN;
-
-	ret = priv->sleep[adap->id](fe);
-
-	mutex_unlock(&adap->dev->usb_mutex);
-
-	return ret;
-}
-
-/* override tuner callbacks for resource locking */
-static int af9015_tuner_init(struct dvb_frontend *fe)
-{
-	int ret;
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct af9015_state *priv = adap->dev->priv;
-
-	if (mutex_lock_interruptible(&adap->dev->usb_mutex))
-		return -EAGAIN;
-
-	ret = priv->tuner_init[adap->id](fe);
-
-	mutex_unlock(&adap->dev->usb_mutex);
-
-	return ret;
-}
-
-/* override tuner callbacks for resource locking */
-static int af9015_tuner_sleep(struct dvb_frontend *fe)
-{
-	int ret;
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct af9015_state *priv = adap->dev->priv;
-
-	if (mutex_lock_interruptible(&adap->dev->usb_mutex))
-		return -EAGAIN;
-
-	ret = priv->tuner_sleep[adap->id](fe);
-
-	mutex_unlock(&adap->dev->usb_mutex);
-
-	return ret;
-}
-
-
-static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	int ret;
-	struct af9015_state *state = adap->dev->priv;
-
-	if (adap->id == 1) {
-		/* copy firmware to 2nd demodulator */
-		if (af9015_config.dual_mode) {
-			ret = af9015_copy_firmware(adap->dev);
-			if (ret) {
-				err("firmware copy to 2nd frontend " \
-					"failed, will disable it");
-				af9015_config.dual_mode = 0;
-				return -ENODEV;
-			}
-		} else {
-			return -ENODEV;
-		}
-	}
-
-	/* attach demodulator */
-	adap->fe_adap[0].fe = dvb_attach(af9013_attach,
-		&af9015_af9013_config[adap->id], &adap->dev->i2c_adap);
-
-	/*
-	 * AF9015 firmware does not like if it gets interrupted by I2C adapter
-	 * request on some critical phases. During normal operation I2C adapter
-	 * is used only 2nd demodulator and tuner on dual tuner devices.
-	 * Override demodulator callbacks and use mutex for limit access to
-	 * those "critical" paths to keep AF9015 happy.
-	 * Note: we abuse unused usb_mutex here.
-	 */
-	if (adap->fe_adap[0].fe) {
-		state->set_frontend[adap->id] =
-			adap->fe_adap[0].fe->ops.set_frontend;
-		adap->fe_adap[0].fe->ops.set_frontend =
-			af9015_af9013_set_frontend;
-
-		state->read_status[adap->id] =
-			adap->fe_adap[0].fe->ops.read_status;
-		adap->fe_adap[0].fe->ops.read_status =
-			af9015_af9013_read_status;
-
-		state->init[adap->id] = adap->fe_adap[0].fe->ops.init;
-		adap->fe_adap[0].fe->ops.init = af9015_af9013_init;
-
-		state->sleep[adap->id] = adap->fe_adap[0].fe->ops.sleep;
-		adap->fe_adap[0].fe->ops.sleep = af9015_af9013_sleep;
-	}
-
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-static struct mt2060_config af9015_mt2060_config = {
-	.i2c_address = 0xc0,
-	.clock_out = 0,
-};
-
-static struct qt1010_config af9015_qt1010_config = {
-	.i2c_address = 0xc4,
-};
-
-static struct tda18271_config af9015_tda18271_config = {
-	.gate = TDA18271_GATE_DIGITAL,
-	.small_i2c = TDA18271_16_BYTE_CHUNK_INIT,
-};
-
-static struct mxl5005s_config af9015_mxl5003_config = {
-	.i2c_address     = 0xc6,
-	.if_freq         = IF_FREQ_4570000HZ,
-	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
-	.agc_mode        = MXL_SINGLE_AGC,
-	.tracking_filter = MXL_TF_DEFAULT,
-	.rssi_enable     = MXL_RSSI_ENABLE,
-	.cap_select      = MXL_CAP_SEL_ENABLE,
-	.div_out         = MXL_DIV_OUT_4,
-	.clock_out       = MXL_CLOCK_OUT_DISABLE,
-	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
-	.top		 = MXL5005S_TOP_25P2,
-	.mod_mode        = MXL_DIGITAL_MODE,
-	.if_mode         = MXL_ZERO_IF,
-	.AgcMasterByte   = 0x00,
-};
-
-static struct mxl5005s_config af9015_mxl5005_config = {
-	.i2c_address     = 0xc6,
-	.if_freq         = IF_FREQ_4570000HZ,
-	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
-	.agc_mode        = MXL_SINGLE_AGC,
-	.tracking_filter = MXL_TF_OFF,
-	.rssi_enable     = MXL_RSSI_ENABLE,
-	.cap_select      = MXL_CAP_SEL_ENABLE,
-	.div_out         = MXL_DIV_OUT_4,
-	.clock_out       = MXL_CLOCK_OUT_DISABLE,
-	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
-	.top		 = MXL5005S_TOP_25P2,
-	.mod_mode        = MXL_DIGITAL_MODE,
-	.if_mode         = MXL_ZERO_IF,
-	.AgcMasterByte   = 0x00,
-};
-
-static struct mc44s803_config af9015_mc44s803_config = {
-	.i2c_address = 0xc0,
-	.dig_out = 1,
-};
-
-static struct tda18218_config af9015_tda18218_config = {
-	.i2c_address = 0xc0,
-	.i2c_wr_max = 21, /* max wr bytes AF9015 I2C adap can handle at once */
-};
-
-static struct mxl5007t_config af9015_mxl5007t_config = {
-	.xtal_freq_hz = MxL_XTAL_24_MHZ,
-	.if_freq_hz = MxL_IF_4_57_MHZ,
-};
-
-static int af9015_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	int ret;
-	struct af9015_state *state = adap->dev->priv;
-	deb_info("%s:\n", __func__);
-
-	switch (af9015_af9013_config[adap->id].tuner) {
-	case AF9013_TUNER_MT2060:
-	case AF9013_TUNER_MT2060_2:
-		ret = dvb_attach(mt2060_attach, adap->fe_adap[0].fe,
-			&adap->dev->i2c_adap, &af9015_mt2060_config,
-			af9015_config.mt2060_if1[adap->id])
-			== NULL ? -ENODEV : 0;
-		break;
-	case AF9013_TUNER_QT1010:
-	case AF9013_TUNER_QT1010A:
-		ret = dvb_attach(qt1010_attach, adap->fe_adap[0].fe,
-			&adap->dev->i2c_adap,
-			&af9015_qt1010_config) == NULL ? -ENODEV : 0;
-		break;
-	case AF9013_TUNER_TDA18271:
-		ret = dvb_attach(tda18271_attach, adap->fe_adap[0].fe, 0xc0,
-			&adap->dev->i2c_adap,
-			&af9015_tda18271_config) == NULL ? -ENODEV : 0;
-		break;
-	case AF9013_TUNER_TDA18218:
-		ret = dvb_attach(tda18218_attach, adap->fe_adap[0].fe,
-			&adap->dev->i2c_adap,
-			&af9015_tda18218_config) == NULL ? -ENODEV : 0;
-		break;
-	case AF9013_TUNER_MXL5003D:
-		ret = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe,
-			&adap->dev->i2c_adap,
-			&af9015_mxl5003_config) == NULL ? -ENODEV : 0;
-		break;
-	case AF9013_TUNER_MXL5005D:
-	case AF9013_TUNER_MXL5005R:
-		ret = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe,
-			&adap->dev->i2c_adap,
-			&af9015_mxl5005_config) == NULL ? -ENODEV : 0;
-		break;
-	case AF9013_TUNER_ENV77H11D5:
-		ret = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0xc0,
-			&adap->dev->i2c_adap,
-			DVB_PLL_TDA665X) == NULL ? -ENODEV : 0;
-		break;
-	case AF9013_TUNER_MC44S803:
-		ret = dvb_attach(mc44s803_attach, adap->fe_adap[0].fe,
-			&adap->dev->i2c_adap,
-			&af9015_mc44s803_config) == NULL ? -ENODEV : 0;
-		break;
-	case AF9013_TUNER_MXL5007T:
-		ret = dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe,
-			&adap->dev->i2c_adap,
-			0xc0, &af9015_mxl5007t_config) == NULL ? -ENODEV : 0;
-		break;
-	case AF9013_TUNER_UNKNOWN:
-	default:
-		ret = -ENODEV;
-		err("Unknown tuner id:%d",
-			af9015_af9013_config[adap->id].tuner);
-	}
-
-	if (adap->fe_adap[0].fe->ops.tuner_ops.init) {
-		state->tuner_init[adap->id] =
-			adap->fe_adap[0].fe->ops.tuner_ops.init;
-		adap->fe_adap[0].fe->ops.tuner_ops.init = af9015_tuner_init;
-	}
-
-	if (adap->fe_adap[0].fe->ops.tuner_ops.sleep) {
-		state->tuner_sleep[adap->id] =
-			adap->fe_adap[0].fe->ops.tuner_ops.sleep;
-		adap->fe_adap[0].fe->ops.tuner_ops.sleep = af9015_tuner_sleep;
-	}
-
-	return ret;
-}
-
-enum af9015_usb_table_entry {
-	AFATECH_9015,
-	AFATECH_9016,
-	WINFAST_DTV_GOLD,
-	PINNACLE_PCTV_71E,
-	KWORLD_PLUSTV_399U,
-	TINYTWIN,
-	AZUREWAVE_TU700,
-	TERRATEC_AF9015,
-	KWORLD_PLUSTV_PC160,
-	AVERTV_VOLAR_X,
-	XTENSIONS_380U,
-	MSI_DIGIVOX_DUO,
-	AVERTV_VOLAR_X_REV2,
-	TELESTAR_STARSTICK_2,
-	AVERMEDIA_A309_USB,
-	MSI_DIGIVOX_MINI_III,
-	KWORLD_E396,
-	KWORLD_E39B,
-	KWORLD_E395,
-	TREKSTOR_DVBT,
-	AVERTV_A850,
-	AVERTV_A805,
-	CONCEPTRONIC_CTVDIGRCU,
-	KWORLD_MC810,
-	GENIUS_TVGO_DVB_T03,
-	KWORLD_399U_2,
-	KWORLD_PC160_T,
-	SVEON_STV20,
-	TINYTWIN_2,
-	WINFAST_DTV2000DS,
-	KWORLD_UB383_T,
-	KWORLD_E39A,
-	AVERMEDIA_A815M,
-	CINERGY_T_STICK_RC,
-	CINERGY_T_DUAL_RC,
-	AVERTV_A850T,
-	TINYTWIN_3,
-	SVEON_STV22,
-};
-
-static struct usb_device_id af9015_usb_table[] = {
-	[AFATECH_9015] = {
-		USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9015)},
-	[AFATECH_9016] = {
-		USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9016)},
-	[WINFAST_DTV_GOLD] = {
-		USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_GOLD)},
-	[PINNACLE_PCTV_71E] = {
-		USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV71E)},
-	[KWORLD_PLUSTV_399U] = {
-		USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U)},
-	[TINYTWIN] = {
-		USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TINYTWIN)},
-	[AZUREWAVE_TU700] = {
-		USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_AZUREWAVE_AD_TU700)},
-	[TERRATEC_AF9015] = {
-		USB_DEVICE(USB_VID_TERRATEC,
-				USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2)},
-	[KWORLD_PLUSTV_PC160] = {
-		USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_2T)},
-	[AVERTV_VOLAR_X] = {
-		USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X)},
-	[XTENSIONS_380U] = {
-		USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380)},
-	[MSI_DIGIVOX_DUO] = {
-		USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO)},
-	[AVERTV_VOLAR_X_REV2] = {
-		USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2)},
-	[TELESTAR_STARSTICK_2] = {
-		USB_DEVICE(USB_VID_TELESTAR,  USB_PID_TELESTAR_STARSTICK_2)},
-	[AVERMEDIA_A309_USB] = {
-		USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309)},
-	[MSI_DIGIVOX_MINI_III] = {
-		USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGI_VOX_MINI_III)},
-	[KWORLD_E396] = {
-		USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U)},
-	[KWORLD_E39B] = {
-		USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_2)},
-	[KWORLD_E395] = {
-		USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_3)},
-	[TREKSTOR_DVBT] = {
-		USB_DEVICE(USB_VID_AFATECH, USB_PID_TREKSTOR_DVBT)},
-	[AVERTV_A850] = {
-		USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850)},
-	[AVERTV_A805] = {
-		USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A805)},
-	[CONCEPTRONIC_CTVDIGRCU] = {
-		USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CONCEPTRONIC_CTVDIGRCU)},
-	[KWORLD_MC810] = {
-		USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_MC810)},
-	[GENIUS_TVGO_DVB_T03] = {
-		USB_DEVICE(USB_VID_KYE, USB_PID_GENIUS_TVGO_DVB_T03)},
-	[KWORLD_399U_2] = {
-		USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U_2)},
-	[KWORLD_PC160_T] = {
-		USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_T)},
-	[SVEON_STV20] = {
-		USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20)},
-	[TINYTWIN_2] = {
-		USB_DEVICE(USB_VID_KWORLD_2, USB_PID_TINYTWIN_2)},
-	[WINFAST_DTV2000DS] = {
-		USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS)},
-	[KWORLD_UB383_T] = {
-		USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB383_T)},
-	[KWORLD_E39A] = {
-		USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_4)},
-	[AVERMEDIA_A815M] = {
-		USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A815M)},
-	[CINERGY_T_STICK_RC] = {
-		USB_DEVICE(USB_VID_TERRATEC,
-				USB_PID_TERRATEC_CINERGY_T_STICK_RC)},
-	[CINERGY_T_DUAL_RC] = {
-		USB_DEVICE(USB_VID_TERRATEC,
-				USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC)},
-	[AVERTV_A850T] = {
-		USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850T)},
-	[TINYTWIN_3] = {
-		USB_DEVICE(USB_VID_GTEK, USB_PID_TINYTWIN_3)},
-	[SVEON_STV22] = {
-		USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22)},
-	{ }
-};
-MODULE_DEVICE_TABLE(usb, af9015_usb_table);
-
-#define AF9015_RC_INTERVAL 500
-static struct dvb_usb_device_properties af9015_properties[] = {
-	{
-		.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-		.usb_ctrl = DEVICE_SPECIFIC,
-		.download_firmware = af9015_download_firmware,
-		.firmware = "dvb-usb-af9015.fw",
-		.no_reconnect = 1,
-
-		.size_of_priv = sizeof(struct af9015_state),
-
-		.num_adapters = 2,
-		.adapter = {
-			{
-				.num_frontends = 1,
-				.fe = {
-					{
-						.caps = DVB_USB_ADAP_HAS_PID_FILTER |
-							DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-
-						.pid_filter_count = 32,
-						.pid_filter       = af9015_pid_filter,
-						.pid_filter_ctrl  = af9015_pid_filter_ctrl,
-
-						.frontend_attach = af9015_af9013_frontend_attach,
-						.tuner_attach    = af9015_tuner_attach,
-						.stream = {
-							.type = USB_BULK,
-							.count = 6,
-							.endpoint = 0x84,
-						},
-					}
-				},
-			},
-			{
-				.num_frontends = 1,
-				.fe = {
-					{
-						.frontend_attach = af9015_af9013_frontend_attach,
-						.tuner_attach    = af9015_tuner_attach,
-						.stream = {
-							.type = USB_BULK,
-							.count = 6,
-							.endpoint = 0x85,
-							.u = {
-								.bulk = {
-									.buffersize = TS_USB20_FRAME_SIZE,
-								}
-							}
-						},
-					}
-				},
-			}
-		},
-
-		.identify_state = af9015_identify_state,
-
-		.rc.core = {
-			.protocol         = RC_TYPE_NEC,
-			.module_name      = "af9015",
-			.rc_query         = af9015_rc_query,
-			.rc_interval      = AF9015_RC_INTERVAL,
-			.allowed_protos   = RC_TYPE_NEC,
-		},
-
-		.i2c_algo = &af9015_i2c_algo,
-
-		.num_device_descs = 12, /* check max from dvb-usb.h */
-		.devices = {
-			{
-				.name = "Afatech AF9015 DVB-T USB2.0 stick",
-				.cold_ids = {
-					&af9015_usb_table[AFATECH_9015],
-					&af9015_usb_table[AFATECH_9016],
-				},
-			}, {
-				.name = "Leadtek WinFast DTV Dongle Gold",
-				.cold_ids = {
-					&af9015_usb_table[WINFAST_DTV_GOLD],
-				},
-			}, {
-				.name = "Pinnacle PCTV 71e",
-				.cold_ids = {
-					&af9015_usb_table[PINNACLE_PCTV_71E],
-				},
-			}, {
-				.name = "KWorld PlusTV Dual DVB-T Stick " \
-					"(DVB-T 399U)",
-				.cold_ids = {
-					&af9015_usb_table[KWORLD_PLUSTV_399U],
-					&af9015_usb_table[KWORLD_399U_2],
-				},
-			}, {
-				.name = "DigitalNow TinyTwin DVB-T Receiver",
-				.cold_ids = {
-					&af9015_usb_table[TINYTWIN],
-					&af9015_usb_table[TINYTWIN_2],
-					&af9015_usb_table[TINYTWIN_3],
-				},
-			}, {
-				.name = "TwinHan AzureWave AD-TU700(704J)",
-				.cold_ids = {
-					&af9015_usb_table[AZUREWAVE_TU700],
-				},
-			}, {
-				.name = "TerraTec Cinergy T USB XE",
-				.cold_ids = {
-					&af9015_usb_table[TERRATEC_AF9015],
-				},
-			}, {
-				.name = "KWorld PlusTV Dual DVB-T PCI " \
-					"(DVB-T PC160-2T)",
-				.cold_ids = {
-					&af9015_usb_table[KWORLD_PLUSTV_PC160],
-				},
-			}, {
-				.name = "AVerMedia AVerTV DVB-T Volar X",
-				.cold_ids = {
-					&af9015_usb_table[AVERTV_VOLAR_X],
-				},
-			}, {
-				.name = "TerraTec Cinergy T Stick RC",
-				.cold_ids = {
-					&af9015_usb_table[CINERGY_T_STICK_RC],
-				},
-			}, {
-				.name = "TerraTec Cinergy T Stick Dual RC",
-				.cold_ids = {
-					&af9015_usb_table[CINERGY_T_DUAL_RC],
-				},
-			}, {
-				.name = "AverMedia AVerTV Red HD+ (A850T)",
-				.cold_ids = {
-					&af9015_usb_table[AVERTV_A850T],
-				},
-			},
-		}
-	}, {
-		.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-		.usb_ctrl = DEVICE_SPECIFIC,
-		.download_firmware = af9015_download_firmware,
-		.firmware = "dvb-usb-af9015.fw",
-		.no_reconnect = 1,
-
-		.size_of_priv = sizeof(struct af9015_state),
-
-		.num_adapters = 2,
-		.adapter = {
-			{
-				.num_frontends = 1,
-				.fe = {
-					{
-						.caps = DVB_USB_ADAP_HAS_PID_FILTER |
-							DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-
-						.pid_filter_count = 32,
-						.pid_filter       = af9015_pid_filter,
-						.pid_filter_ctrl  = af9015_pid_filter_ctrl,
-
-						.frontend_attach = af9015_af9013_frontend_attach,
-						.tuner_attach    = af9015_tuner_attach,
-						.stream = {
-							.type = USB_BULK,
-							.count = 6,
-							.endpoint = 0x84,
-						},
-					}
-				},
-			},
-			{
-				.num_frontends = 1,
-				.fe = {
-					{
-						.frontend_attach = af9015_af9013_frontend_attach,
-						.tuner_attach    = af9015_tuner_attach,
-						.stream = {
-							.type = USB_BULK,
-							.count = 6,
-							.endpoint = 0x85,
-							.u = {
-								.bulk = {
-									.buffersize = TS_USB20_FRAME_SIZE,
-								}
-							}
-						},
-					}
-				},
-			}
-		},
-
-		.identify_state = af9015_identify_state,
-
-		.rc.core = {
-			.protocol         = RC_TYPE_NEC,
-			.module_name      = "af9015",
-			.rc_query         = af9015_rc_query,
-			.rc_interval      = AF9015_RC_INTERVAL,
-			.allowed_protos   = RC_TYPE_NEC,
-		},
-
-		.i2c_algo = &af9015_i2c_algo,
-
-		.num_device_descs = 10, /* check max from dvb-usb.h */
-		.devices = {
-			{
-				.name = "Xtensions XD-380",
-				.cold_ids = {
-					&af9015_usb_table[XTENSIONS_380U],
-				},
-			}, {
-				.name = "MSI DIGIVOX Duo",
-				.cold_ids = {
-					&af9015_usb_table[MSI_DIGIVOX_DUO],
-				},
-			}, {
-				.name = "Fujitsu-Siemens Slim Mobile USB DVB-T",
-				.cold_ids = {
-					&af9015_usb_table[AVERTV_VOLAR_X_REV2],
-				},
-			}, {
-				.name = "Telestar Starstick 2",
-				.cold_ids = {
-					&af9015_usb_table[TELESTAR_STARSTICK_2],
-				},
-			}, {
-				.name = "AVerMedia A309",
-				.cold_ids = {
-					&af9015_usb_table[AVERMEDIA_A309_USB],
-				},
-			}, {
-				.name = "MSI Digi VOX mini III",
-				.cold_ids = {
-					&af9015_usb_table[MSI_DIGIVOX_MINI_III],
-				},
-			}, {
-				.name = "KWorld USB DVB-T TV Stick II " \
-					"(VS-DVB-T 395U)",
-				.cold_ids = {
-					&af9015_usb_table[KWORLD_E396],
-					&af9015_usb_table[KWORLD_E39B],
-					&af9015_usb_table[KWORLD_E395],
-					&af9015_usb_table[KWORLD_E39A],
-				},
-			}, {
-				.name = "TrekStor DVB-T USB Stick",
-				.cold_ids = {
-					&af9015_usb_table[TREKSTOR_DVBT],
-				},
-			}, {
-				.name = "AverMedia AVerTV Volar Black HD " \
-					"(A850)",
-				.cold_ids = {
-					&af9015_usb_table[AVERTV_A850],
-				},
-			}, {
-				.name = "Sveon STV22 Dual USB DVB-T Tuner HDTV",
-				.cold_ids = {
-					&af9015_usb_table[SVEON_STV22],
-				},
-			},
-		}
-	}, {
-		.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-		.usb_ctrl = DEVICE_SPECIFIC,
-		.download_firmware = af9015_download_firmware,
-		.firmware = "dvb-usb-af9015.fw",
-		.no_reconnect = 1,
-
-		.size_of_priv = sizeof(struct af9015_state),
-
-		.num_adapters = 2,
-		.adapter = {
-			{
-				.num_frontends = 1,
-				.fe = {
-					{
-						.caps = DVB_USB_ADAP_HAS_PID_FILTER |
-							DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-
-						.pid_filter_count = 32,
-						.pid_filter       = af9015_pid_filter,
-						.pid_filter_ctrl  = af9015_pid_filter_ctrl,
-
-						.frontend_attach = af9015_af9013_frontend_attach,
-						.tuner_attach    = af9015_tuner_attach,
-						.stream = {
-							.type = USB_BULK,
-							.count = 6,
-							.endpoint = 0x84,
-						},
-					}
-				},
-			},
-			{
-				.num_frontends = 1,
-				.fe = {
-					{
-						.frontend_attach = af9015_af9013_frontend_attach,
-						.tuner_attach    = af9015_tuner_attach,
-						.stream = {
-							.type = USB_BULK,
-							.count = 6,
-							.endpoint = 0x85,
-							.u = {
-								.bulk = {
-									.buffersize = TS_USB20_FRAME_SIZE,
-								}
-							}
-						},
-					}
-				},
-			}
-		},
-
-		.identify_state = af9015_identify_state,
-
-		.rc.core = {
-			.protocol         = RC_TYPE_NEC,
-			.module_name      = "af9015",
-			.rc_query         = af9015_rc_query,
-			.rc_interval      = AF9015_RC_INTERVAL,
-			.allowed_protos   = RC_TYPE_NEC,
-		},
-
-		.i2c_algo = &af9015_i2c_algo,
-
-		.num_device_descs = 9, /* check max from dvb-usb.h */
-		.devices = {
-			{
-				.name = "AverMedia AVerTV Volar GPS 805 (A805)",
-				.cold_ids = {
-					&af9015_usb_table[AVERTV_A805],
-				},
-			}, {
-				.name = "Conceptronic USB2.0 DVB-T CTVDIGRCU " \
-					"V3.0",
-				.cold_ids = {
-					&af9015_usb_table[CONCEPTRONIC_CTVDIGRCU],
-				},
-			}, {
-				.name = "KWorld Digial MC-810",
-				.cold_ids = {
-					&af9015_usb_table[KWORLD_MC810],
-				},
-			}, {
-				.name = "Genius TVGo DVB-T03",
-				.cold_ids = {
-					&af9015_usb_table[GENIUS_TVGO_DVB_T03],
-				},
-			}, {
-				.name = "KWorld PlusTV DVB-T PCI Pro Card " \
-					"(DVB-T PC160-T)",
-				.cold_ids = {
-					&af9015_usb_table[KWORLD_PC160_T],
-				},
-			}, {
-				.name = "Sveon STV20 Tuner USB DVB-T HDTV",
-				.cold_ids = {
-					&af9015_usb_table[SVEON_STV20],
-				},
-			}, {
-				.name = "Leadtek WinFast DTV2000DS",
-				.cold_ids = {
-					&af9015_usb_table[WINFAST_DTV2000DS],
-				},
-			}, {
-				.name = "KWorld USB DVB-T Stick Mobile " \
-					"(UB383-T)",
-				.cold_ids = {
-					&af9015_usb_table[KWORLD_UB383_T],
-				},
-			}, {
-				.name = "AverMedia AVerTV Volar M (A815Mac)",
-				.cold_ids = {
-					&af9015_usb_table[AVERMEDIA_A815M],
-				},
-			},
-		}
-	},
-};
-
-static int af9015_usb_probe(struct usb_interface *intf,
-			    const struct usb_device_id *id)
-{
-	int ret = 0;
-	struct dvb_usb_device *d = NULL;
-	struct usb_device *udev = interface_to_usbdev(intf);
-	u8 i;
-
-	deb_info("%s: interface:%d\n", __func__,
-		intf->cur_altsetting->desc.bInterfaceNumber);
-
-	/* interface 0 is used by DVB-T receiver and
-	   interface 1 is for remote controller (HID) */
-	if (intf->cur_altsetting->desc.bInterfaceNumber == 0) {
-		ret = af9015_read_config(udev);
-		if (ret)
-			return ret;
-
-		for (i = 0; i < af9015_properties_count; i++) {
-			ret = dvb_usb_device_init(intf, &af9015_properties[i],
-				THIS_MODULE, &d, adapter_nr);
-			if (!ret)
-				break;
-			if (ret != -ENODEV)
-				return ret;
-		}
-		if (ret)
-			return ret;
-
-		if (d)
-			ret = af9015_init(d);
-	}
-
-	return ret;
-}
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver af9015_usb_driver = {
-	.name = "dvb_usb_af9015",
-	.probe = af9015_usb_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table = af9015_usb_table,
-};
-
-module_usb_driver(af9015_usb_driver);
-
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_DESCRIPTION("Afatech AF9015 driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h
deleted file mode 100644
index 2f68419..0000000
--- a/drivers/media/dvb/dvb-usb/af9015.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver
- *
- * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
- *
- * Thanks to Afatech who kindly provided information.
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _DVB_USB_AF9015_H_
-#define _DVB_USB_AF9015_H_
-
-#define DVB_USB_LOG_PREFIX "af9015"
-#include "dvb-usb.h"
-
-#define deb_info(args...) dprintk(dvb_usb_af9015_debug, 0x01, args)
-#define deb_rc(args...)   dprintk(dvb_usb_af9015_debug, 0x02, args)
-#define deb_xfer(args...) dprintk(dvb_usb_af9015_debug, 0x04, args)
-#define deb_reg(args...)  dprintk(dvb_usb_af9015_debug, 0x08, args)
-#define deb_i2c(args...)  dprintk(dvb_usb_af9015_debug, 0x10, args)
-#define deb_fw(args...)   dprintk(dvb_usb_af9015_debug, 0x20, args)
-
-#define AF9015_I2C_EEPROM  0xa0
-#define AF9015_I2C_DEMOD   0x38
-#define AF9015_USB_TIMEOUT 2000
-
-/* EEPROM locations */
-#define AF9015_EEPROM_IR_MODE        0x18
-#define AF9015_EEPROM_IR_REMOTE_TYPE 0x34
-#define AF9015_EEPROM_TS_MODE        0x31
-#define AF9015_EEPROM_DEMOD2_I2C     0x32
-
-#define AF9015_EEPROM_SAW_BW1        0x35
-#define AF9015_EEPROM_XTAL_TYPE1     0x36
-#define AF9015_EEPROM_SPEC_INV1      0x37
-#define AF9015_EEPROM_IF1L           0x38
-#define AF9015_EEPROM_IF1H           0x39
-#define AF9015_EEPROM_MT2060_IF1L    0x3a
-#define AF9015_EEPROM_MT2060_IF1H    0x3b
-#define AF9015_EEPROM_TUNER_ID1      0x3c
-
-#define AF9015_EEPROM_SAW_BW2        0x45
-#define AF9015_EEPROM_XTAL_TYPE2     0x46
-#define AF9015_EEPROM_SPEC_INV2      0x47
-#define AF9015_EEPROM_IF2L           0x48
-#define AF9015_EEPROM_IF2H           0x49
-#define AF9015_EEPROM_MT2060_IF2L    0x4a
-#define AF9015_EEPROM_MT2060_IF2H    0x4b
-#define AF9015_EEPROM_TUNER_ID2      0x4c
-
-#define AF9015_EEPROM_OFFSET (AF9015_EEPROM_SAW_BW2 - AF9015_EEPROM_SAW_BW1)
-
-struct req_t {
-	u8  cmd;       /* [0] */
-	/*  seq */     /* [1] */
-	u8  i2c_addr;  /* [2] */
-	u16 addr;      /* [3|4] */
-	u8  mbox;      /* [5] */
-	u8  addr_len;  /* [6] */
-	u8  data_len;  /* [7] */
-	u8  *data;
-};
-
-enum af9015_cmd {
-	GET_CONFIG           = 0x10,
-	DOWNLOAD_FIRMWARE    = 0x11,
-	BOOT                 = 0x13,
-	READ_MEMORY          = 0x20,
-	WRITE_MEMORY         = 0x21,
-	READ_WRITE_I2C       = 0x22,
-	COPY_FIRMWARE        = 0x23,
-	RECONNECT_USB        = 0x5a,
-	WRITE_VIRTUAL_MEMORY = 0x26,
-	GET_IR_CODE          = 0x27,
-	READ_I2C,
-	WRITE_I2C,
-};
-
-enum af9015_ir_mode {
-	AF9015_IR_MODE_DISABLED = 0,
-	AF9015_IR_MODE_HID,
-	AF9015_IR_MODE_RLC,
-	AF9015_IR_MODE_RC6,
-	AF9015_IR_MODE_POLLING, /* just guess */
-};
-
-struct af9015_state {
-	u8 rc_repeat;
-	u32 rc_keycode;
-	u8 rc_last[4];
-
-	/* for demod callback override */
-	int (*set_frontend[2]) (struct dvb_frontend *fe);
-	int (*read_status[2]) (struct dvb_frontend *fe, fe_status_t *status);
-	int (*init[2]) (struct dvb_frontend *fe);
-	int (*sleep[2]) (struct dvb_frontend *fe);
-	int (*tuner_init[2]) (struct dvb_frontend *fe);
-	int (*tuner_sleep[2]) (struct dvb_frontend *fe);
-};
-
-struct af9015_config {
-	u8  dual_mode:1;
-	u16 mt2060_if1[2];
-	u16 firmware_size;
-	u16 firmware_checksum;
-	u32 eeprom_sum;
-};
-
-enum af9015_remote {
-	AF9015_REMOTE_NONE                    = 0,
-/* 1 */	AF9015_REMOTE_A_LINK_DTU_M,
-	AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
-	AF9015_REMOTE_MYGICTV_U718,
-	AF9015_REMOTE_DIGITTRADE_DVB_T,
-/* 5 */	AF9015_REMOTE_AVERMEDIA_KS,
-};
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/af9035.c b/drivers/media/dvb/dvb-usb/af9035.c
deleted file mode 100644
index e83b39d..0000000
--- a/drivers/media/dvb/dvb-usb/af9035.c
+++ /dev/null
@@ -1,1242 +0,0 @@
-/*
- * Afatech AF9035 DVB USB driver
- *
- * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
- * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include "af9035.h"
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-static DEFINE_MUTEX(af9035_usb_mutex);
-static struct dvb_usb_device_properties af9035_properties[2];
-static int af9035_properties_count = ARRAY_SIZE(af9035_properties);
-
-static u16 af9035_checksum(const u8 *buf, size_t len)
-{
-	size_t i;
-	u16 checksum = 0;
-
-	for (i = 1; i < len; i++) {
-		if (i % 2)
-			checksum += buf[i] << 8;
-		else
-			checksum += buf[i];
-	}
-	checksum = ~checksum;
-
-	return checksum;
-}
-
-static int af9035_ctrl_msg(struct usb_device *udev, struct usb_req *req)
-{
-#define BUF_LEN 64
-#define REQ_HDR_LEN 4 /* send header size */
-#define ACK_HDR_LEN 3 /* rece header size */
-#define CHECKSUM_LEN 2
-#define USB_TIMEOUT 2000
-
-	int ret, msg_len, act_len;
-	u8 buf[BUF_LEN];
-	static u8 seq; /* packet sequence number */
-	u16 checksum, tmp_checksum;
-
-	/* buffer overflow check */
-	if (req->wlen > (BUF_LEN - REQ_HDR_LEN - CHECKSUM_LEN) ||
-		req->rlen > (BUF_LEN - ACK_HDR_LEN - CHECKSUM_LEN)) {
-		pr_debug("%s: too much data wlen=%d rlen=%d\n", __func__,
-				req->wlen, req->rlen);
-		return -EINVAL;
-	}
-
-	if (mutex_lock_interruptible(&af9035_usb_mutex) < 0)
-		return -EAGAIN;
-
-	buf[0] = REQ_HDR_LEN + req->wlen + CHECKSUM_LEN - 1;
-	buf[1] = req->mbox;
-	buf[2] = req->cmd;
-	buf[3] = seq++;
-	if (req->wlen)
-		memcpy(&buf[4], req->wbuf, req->wlen);
-
-	/* calc and add checksum */
-	checksum = af9035_checksum(buf, buf[0] - 1);
-	buf[buf[0] - 1] = (checksum >> 8);
-	buf[buf[0] - 0] = (checksum & 0xff);
-
-	msg_len = REQ_HDR_LEN + req->wlen + CHECKSUM_LEN ;
-
-	/* send req */
-	ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x02), buf, msg_len,
-			&act_len, USB_TIMEOUT);
-	if (ret < 0)
-		err("bulk message failed=%d (%d/%d)", ret, msg_len, act_len);
-	else
-		if (act_len != msg_len)
-			ret = -EIO; /* all data is not send */
-	if (ret < 0)
-		goto err_mutex_unlock;
-
-	/* no ack for those packets */
-	if (req->cmd == CMD_FW_DL)
-		goto exit_mutex_unlock;
-
-	/* receive ack and data if read req */
-	msg_len = ACK_HDR_LEN + req->rlen + CHECKSUM_LEN;
-	ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, 0x81), buf, msg_len,
-			&act_len, USB_TIMEOUT);
-	if (ret < 0) {
-		err("recv bulk message failed=%d", ret);
-		ret = -EIO;
-		goto err_mutex_unlock;
-	}
-
-	if (act_len != msg_len) {
-		err("recv bulk message truncated (%d != %d)", act_len, msg_len);
-		ret = -EIO;
-		goto err_mutex_unlock;
-	}
-
-	/* verify checksum */
-	checksum = af9035_checksum(buf, act_len - 2);
-	tmp_checksum = (buf[act_len - 2] << 8) | buf[act_len - 1];
-	if (tmp_checksum != checksum) {
-		err("%s: command=%02x checksum mismatch (%04x != %04x)",
-		    __func__, req->cmd, tmp_checksum, checksum);
-		ret = -EIO;
-		goto err_mutex_unlock;
-	}
-
-	/* check status */
-	if (buf[2]) {
-		pr_debug("%s: command=%02x failed fw error=%d\n", __func__,
-				req->cmd, buf[2]);
-		ret = -EIO;
-		goto err_mutex_unlock;
-	}
-
-	/* read request, copy returned data to return buf */
-	if (req->rlen)
-		memcpy(req->rbuf, &buf[ACK_HDR_LEN], req->rlen);
-
-err_mutex_unlock:
-exit_mutex_unlock:
-	mutex_unlock(&af9035_usb_mutex);
-
-	return ret;
-}
-
-/* write multiple registers */
-static int af9035_wr_regs(struct dvb_usb_device *d, u32 reg, u8 *val, int len)
-{
-	u8 wbuf[6 + len];
-	u8 mbox = (reg >> 16) & 0xff;
-	struct usb_req req = { CMD_MEM_WR, mbox, sizeof(wbuf), wbuf, 0, NULL };
-
-	wbuf[0] = len;
-	wbuf[1] = 2;
-	wbuf[2] = 0;
-	wbuf[3] = 0;
-	wbuf[4] = (reg >> 8) & 0xff;
-	wbuf[5] = (reg >> 0) & 0xff;
-	memcpy(&wbuf[6], val, len);
-
-	return af9035_ctrl_msg(d->udev, &req);
-}
-
-/* read multiple registers */
-static int af9035_rd_regs(struct dvb_usb_device *d, u32 reg, u8 *val, int len)
-{
-	u8 wbuf[] = { len, 2, 0, 0, (reg >> 8) & 0xff, reg & 0xff };
-	u8 mbox = (reg >> 16) & 0xff;
-	struct usb_req req = { CMD_MEM_RD, mbox, sizeof(wbuf), wbuf, len, val };
-
-	return af9035_ctrl_msg(d->udev, &req);
-}
-
-/* write single register */
-static int af9035_wr_reg(struct dvb_usb_device *d, u32 reg, u8 val)
-{
-	return af9035_wr_regs(d, reg, &val, 1);
-}
-
-/* read single register */
-static int af9035_rd_reg(struct dvb_usb_device *d, u32 reg, u8 *val)
-{
-	return af9035_rd_regs(d, reg, val, 1);
-}
-
-/* write single register with mask */
-static int af9035_wr_reg_mask(struct dvb_usb_device *d, u32 reg, u8 val,
-		u8 mask)
-{
-	int ret;
-	u8 tmp;
-
-	/* no need for read if whole reg is written */
-	if (mask != 0xff) {
-		ret = af9035_rd_regs(d, reg, &tmp, 1);
-		if (ret)
-			return ret;
-
-		val &= mask;
-		tmp &= ~mask;
-		val |= tmp;
-	}
-
-	return af9035_wr_regs(d, reg, &val, 1);
-}
-
-static int af9035_i2c_master_xfer(struct i2c_adapter *adap,
-		struct i2c_msg msg[], int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	struct state *state = d->priv;
-	int ret;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	/*
-	 * I2C sub header is 5 bytes long. Meaning of those bytes are:
-	 * 0: data len
-	 * 1: I2C addr << 1
-	 * 2: reg addr len
-	 *    byte 3 and 4 can be used as reg addr
-	 * 3: reg addr MSB
-	 *    used when reg addr len is set to 2
-	 * 4: reg addr LSB
-	 *    used when reg addr len is set to 1 or 2
-	 *
-	 * For the simplify we do not use register addr at all.
-	 * NOTE: As a firmware knows tuner type there is very small possibility
-	 * there could be some tuner I2C hacks done by firmware and this may
-	 * lead problems if firmware expects those bytes are used.
-	 */
-	if (num == 2 && !(msg[0].flags & I2C_M_RD) &&
-			(msg[1].flags & I2C_M_RD)) {
-		if (msg[0].len > 40 || msg[1].len > 40) {
-			/* TODO: correct limits > 40 */
-			ret = -EOPNOTSUPP;
-		} else if (msg[0].addr == state->af9033_config[0].i2c_addr) {
-			/* integrated demod */
-			u32 reg = msg[0].buf[0] << 16 | msg[0].buf[1] << 8 |
-					msg[0].buf[2];
-			ret = af9035_rd_regs(d, reg, &msg[1].buf[0],
-					msg[1].len);
-		} else {
-			/* I2C */
-			u8 buf[5 + msg[0].len];
-			struct usb_req req = { CMD_I2C_RD, 0, sizeof(buf),
-					buf, msg[1].len, msg[1].buf };
-			buf[0] = msg[1].len;
-			buf[1] = msg[0].addr << 1;
-			buf[2] = 0x00; /* reg addr len */
-			buf[3] = 0x00; /* reg addr MSB */
-			buf[4] = 0x00; /* reg addr LSB */
-			memcpy(&buf[5], msg[0].buf, msg[0].len);
-			ret = af9035_ctrl_msg(d->udev, &req);
-		}
-	} else if (num == 1 && !(msg[0].flags & I2C_M_RD)) {
-		if (msg[0].len > 40) {
-			/* TODO: correct limits > 40 */
-			ret = -EOPNOTSUPP;
-		} else if (msg[0].addr == state->af9033_config[0].i2c_addr) {
-			/* integrated demod */
-			u32 reg = msg[0].buf[0] << 16 | msg[0].buf[1] << 8 |
-					msg[0].buf[2];
-			ret = af9035_wr_regs(d, reg, &msg[0].buf[3],
-					msg[0].len - 3);
-		} else {
-			/* I2C */
-			u8 buf[5 + msg[0].len];
-			struct usb_req req = { CMD_I2C_WR, 0, sizeof(buf), buf,
-					0, NULL };
-			buf[0] = msg[0].len;
-			buf[1] = msg[0].addr << 1;
-			buf[2] = 0x00; /* reg addr len */
-			buf[3] = 0x00; /* reg addr MSB */
-			buf[4] = 0x00; /* reg addr LSB */
-			memcpy(&buf[5], msg[0].buf, msg[0].len);
-			ret = af9035_ctrl_msg(d->udev, &req);
-		}
-	} else {
-		/*
-		 * We support only two kind of I2C transactions:
-		 * 1) 1 x read + 1 x write
-		 * 2) 1 x write
-		 */
-		ret = -EOPNOTSUPP;
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-
-	if (ret < 0)
-		return ret;
-	else
-		return num;
-}
-
-static u32 af9035_i2c_functionality(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm af9035_i2c_algo = {
-	.master_xfer = af9035_i2c_master_xfer,
-	.functionality = af9035_i2c_functionality,
-};
-
-#define AF9035_POLL 250
-static int af9035_rc_query(struct dvb_usb_device *d)
-{
-	unsigned int key;
-	unsigned char b[4];
-	int ret;
-	struct usb_req req = { CMD_IR_GET, 0, 0, NULL, 4, b };
-
-	ret = af9035_ctrl_msg(d->udev, &req);
-	if (ret < 0)
-		goto err;
-
-	if ((b[2] + b[3]) == 0xff) {
-		if ((b[0] + b[1]) == 0xff) {
-			/* NEC */
-			key = b[0] << 8 | b[2];
-		} else {
-			/* ext. NEC */
-			key = b[0] << 16 | b[1] << 8 | b[2];
-		}
-	} else {
-		key = b[0] << 24 | b[1] << 16 | b[2] << 8 | b[3];
-	}
-
-	rc_keydown(d->rc_dev, key, 0);
-
-err:
-	/* ignore errors */
-	return 0;
-}
-
-static int af9035_init(struct dvb_usb_device *d)
-{
-	struct state *state = d->priv;
-	int ret, i;
-	u16 frame_size = 87 * 188 / 4;
-	u8  packet_size = 512 / 4;
-	struct reg_val_mask tab[] = {
-		{ 0x80f99d, 0x01, 0x01 },
-		{ 0x80f9a4, 0x01, 0x01 },
-		{ 0x00dd11, 0x00, 0x20 },
-		{ 0x00dd11, 0x00, 0x40 },
-		{ 0x00dd13, 0x00, 0x20 },
-		{ 0x00dd13, 0x00, 0x40 },
-		{ 0x00dd11, 0x20, 0x20 },
-		{ 0x00dd88, (frame_size >> 0) & 0xff, 0xff},
-		{ 0x00dd89, (frame_size >> 8) & 0xff, 0xff},
-		{ 0x00dd0c, packet_size, 0xff},
-		{ 0x00dd11, state->dual_mode << 6, 0x40 },
-		{ 0x00dd8a, (frame_size >> 0) & 0xff, 0xff},
-		{ 0x00dd8b, (frame_size >> 8) & 0xff, 0xff},
-		{ 0x00dd0d, packet_size, 0xff },
-		{ 0x80f9a3, 0x00, 0x01 },
-		{ 0x80f9cd, 0x00, 0x01 },
-		{ 0x80f99d, 0x00, 0x01 },
-		{ 0x80f9a4, 0x00, 0x01 },
-	};
-
-	pr_debug("%s: USB speed=%d frame_size=%04x packet_size=%02x\n",
-		__func__, d->udev->speed, frame_size, packet_size);
-
-	/* init endpoints */
-	for (i = 0; i < ARRAY_SIZE(tab); i++) {
-		ret = af9035_wr_reg_mask(d, tab[i].reg, tab[i].val,
-				tab[i].mask);
-		if (ret < 0)
-			goto err;
-	}
-
-	return 0;
-
-err:
-	pr_debug("%s: failed=%d\n", __func__, ret);
-
-	return ret;
-}
-
-static int af9035_identify_state(struct usb_device *udev,
-		struct dvb_usb_device_properties *props,
-		struct dvb_usb_device_description **desc,
-		int *cold)
-{
-	int ret;
-	u8 wbuf[1] = { 1 };
-	u8 rbuf[4];
-	struct usb_req req = { CMD_FW_QUERYINFO, 0, sizeof(wbuf), wbuf,
-			sizeof(rbuf), rbuf };
-
-	ret = af9035_ctrl_msg(udev, &req);
-	if (ret < 0)
-		goto err;
-
-	pr_debug("%s: reply=%02x %02x %02x %02x\n", __func__,
-		rbuf[0], rbuf[1], rbuf[2], rbuf[3]);
-	if (rbuf[0] || rbuf[1] || rbuf[2] || rbuf[3])
-		*cold = 0;
-	else
-		*cold = 1;
-
-	return 0;
-
-err:
-	pr_debug("%s: failed=%d\n", __func__, ret);
-
-	return ret;
-}
-
-static int af9035_download_firmware(struct usb_device *udev,
-		const struct firmware *fw)
-{
-	int ret, i, j, len;
-	u8 wbuf[1];
-	u8 rbuf[4];
-	struct usb_req req = { 0, 0, 0, NULL, 0, NULL };
-	struct usb_req req_fw_dl = { CMD_FW_DL, 0, 0, wbuf, 0, NULL };
-	struct usb_req req_fw_ver = { CMD_FW_QUERYINFO, 0, 1, wbuf, 4, rbuf } ;
-	u8 hdr_core;
-	u16 hdr_addr, hdr_data_len, hdr_checksum;
-	#define MAX_DATA 58
-	#define HDR_SIZE 7
-
-	/*
-	 * Thanks to Daniel Glöckner <daniel-gl@gmx.net> about that info!
-	 *
-	 * byte 0: MCS 51 core
-	 *  There are two inside the AF9035 (1=Link and 2=OFDM) with separate
-	 *  address spaces
-	 * byte 1-2: Big endian destination address
-	 * byte 3-4: Big endian number of data bytes following the header
-	 * byte 5-6: Big endian header checksum, apparently ignored by the chip
-	 *  Calculated as ~(h[0]*256+h[1]+h[2]*256+h[3]+h[4]*256)
-	 */
-
-	for (i = fw->size; i > HDR_SIZE;) {
-		hdr_core = fw->data[fw->size - i + 0];
-		hdr_addr = fw->data[fw->size - i + 1] << 8;
-		hdr_addr |= fw->data[fw->size - i + 2] << 0;
-		hdr_data_len = fw->data[fw->size - i + 3] << 8;
-		hdr_data_len |= fw->data[fw->size - i + 4] << 0;
-		hdr_checksum = fw->data[fw->size - i + 5] << 8;
-		hdr_checksum |= fw->data[fw->size - i + 6] << 0;
-
-		pr_debug("%s: core=%d addr=%04x data_len=%d checksum=%04x\n",
-				__func__, hdr_core, hdr_addr, hdr_data_len,
-				hdr_checksum);
-
-		if (((hdr_core != 1) && (hdr_core != 2)) ||
-				(hdr_data_len > i)) {
-			pr_debug("%s: bad firmware\n", __func__);
-			break;
-		}
-
-		/* download begin packet */
-		req.cmd = CMD_FW_DL_BEGIN;
-		ret = af9035_ctrl_msg(udev, &req);
-		if (ret < 0)
-			goto err;
-
-		/* download firmware packet(s) */
-		for (j = HDR_SIZE + hdr_data_len; j > 0; j -= MAX_DATA) {
-			len = j;
-			if (len > MAX_DATA)
-				len = MAX_DATA;
-			req_fw_dl.wlen = len;
-			req_fw_dl.wbuf = (u8 *) &fw->data[fw->size - i +
-					HDR_SIZE + hdr_data_len - j];
-			ret = af9035_ctrl_msg(udev, &req_fw_dl);
-			if (ret < 0)
-				goto err;
-		}
-
-		/* download end packet */
-		req.cmd = CMD_FW_DL_END;
-		ret = af9035_ctrl_msg(udev, &req);
-		if (ret < 0)
-			goto err;
-
-		i -= hdr_data_len + HDR_SIZE;
-
-		pr_debug("%s: data uploaded=%zu\n", __func__, fw->size - i);
-	}
-
-	/* firmware loaded, request boot */
-	req.cmd = CMD_FW_BOOT;
-	ret = af9035_ctrl_msg(udev, &req);
-	if (ret < 0)
-		goto err;
-
-	/* ensure firmware starts */
-	wbuf[0] = 1;
-	ret = af9035_ctrl_msg(udev, &req_fw_ver);
-	if (ret < 0)
-		goto err;
-
-	if (!(rbuf[0] || rbuf[1] || rbuf[2] || rbuf[3])) {
-		info("firmware did not run");
-		ret = -ENODEV;
-		goto err;
-	}
-
-	info("firmware version=%d.%d.%d.%d", rbuf[0], rbuf[1], rbuf[2],
-			rbuf[3]);
-
-	return 0;
-
-err:
-	pr_debug("%s: failed=%d\n", __func__, ret);
-
-	return ret;
-}
-
-static int af9035_download_firmware_it9135(struct usb_device *udev,
-		const struct firmware *fw)
-{
-	int ret, i, i_prev;
-	u8 wbuf[1];
-	u8 rbuf[4];
-	struct usb_req req = { 0, 0, 0, NULL, 0, NULL };
-	struct usb_req req_fw_dl = { CMD_FW_SCATTER_WR, 0, 0, NULL, 0, NULL };
-	struct usb_req req_fw_ver = { CMD_FW_QUERYINFO, 0, 1, wbuf, 4, rbuf } ;
-	#define HDR_SIZE 7
-
-	/*
-	 * There seems to be following firmware header. Meaning of bytes 0-3
-	 * is unknown.
-	 *
-	 * 0: 3
-	 * 1: 0, 1
-	 * 2: 0
-	 * 3: 1, 2, 3
-	 * 4: addr MSB
-	 * 5: addr LSB
-	 * 6: count of data bytes ?
-	 */
-
-	for (i = HDR_SIZE, i_prev = 0; i <= fw->size; i++) {
-		if (i == fw->size ||
-				(fw->data[i + 0] == 0x03 &&
-				(fw->data[i + 1] == 0x00 ||
-				fw->data[i + 1] == 0x01) &&
-				fw->data[i + 2] == 0x00)) {
-			req_fw_dl.wlen = i - i_prev;
-			req_fw_dl.wbuf = (u8 *) &fw->data[i_prev];
-			i_prev = i;
-			ret = af9035_ctrl_msg(udev, &req_fw_dl);
-			if (ret < 0)
-				goto err;
-
-			pr_debug("%s: data uploaded=%d\n", __func__, i);
-		}
-	}
-
-	/* firmware loaded, request boot */
-	req.cmd = CMD_FW_BOOT;
-	ret = af9035_ctrl_msg(udev, &req);
-	if (ret < 0)
-		goto err;
-
-	/* ensure firmware starts */
-	wbuf[0] = 1;
-	ret = af9035_ctrl_msg(udev, &req_fw_ver);
-	if (ret < 0)
-		goto err;
-
-	if (!(rbuf[0] || rbuf[1] || rbuf[2] || rbuf[3])) {
-		info("firmware did not run");
-		ret = -ENODEV;
-		goto err;
-	}
-
-	info("firmware version=%d.%d.%d.%d", rbuf[0], rbuf[1], rbuf[2],
-			rbuf[3]);
-
-	return 0;
-
-err:
-	pr_debug("%s: failed=%d\n", __func__, ret);
-
-	return ret;
-}
-
-/* abuse that callback as there is no better one for reading eeprom */
-static int af9035_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
-{
-	struct state *state = d->priv;
-	int ret, i, eeprom_shift = 0;
-	u8 tmp;
-	u16 tmp16;
-
-	/* check if there is dual tuners */
-	ret = af9035_rd_reg(d, EEPROM_DUAL_MODE, &tmp);
-	if (ret < 0)
-		goto err;
-
-	state->dual_mode = tmp;
-	pr_debug("%s: dual mode=%d\n", __func__, state->dual_mode);
-
-	for (i = 0; i < af9035_properties[0].num_adapters; i++) {
-		/* tuner */
-		ret = af9035_rd_reg(d, EEPROM_1_TUNER_ID + eeprom_shift, &tmp);
-		if (ret < 0)
-			goto err;
-
-		state->af9033_config[i].tuner = tmp;
-		pr_debug("%s: [%d]tuner=%02x\n", __func__, i, tmp);
-
-		switch (tmp) {
-		case AF9033_TUNER_TUA9001:
-		case AF9033_TUNER_FC0011:
-		case AF9033_TUNER_MXL5007T:
-		case AF9033_TUNER_TDA18218:
-			state->af9033_config[i].spec_inv = 1;
-			break;
-		default:
-			warn("tuner ID=%02x not supported, please report!",
-				tmp);
-		};
-
-		/* tuner IF frequency */
-		ret = af9035_rd_reg(d, EEPROM_1_IFFREQ_L + eeprom_shift, &tmp);
-		if (ret < 0)
-			goto err;
-
-		tmp16 = tmp;
-
-		ret = af9035_rd_reg(d, EEPROM_1_IFFREQ_H + eeprom_shift, &tmp);
-		if (ret < 0)
-			goto err;
-
-		tmp16 |= tmp << 8;
-
-		pr_debug("%s: [%d]IF=%d\n", __func__, i, tmp16);
-
-		eeprom_shift = 0x10; /* shift for the 2nd tuner params */
-	}
-
-	/* get demod clock */
-	ret = af9035_rd_reg(d, 0x00d800, &tmp);
-	if (ret < 0)
-		goto err;
-
-	tmp = (tmp >> 0) & 0x0f;
-
-	for (i = 0; i < af9035_properties[0].num_adapters; i++)
-		state->af9033_config[i].clock = clock_lut[tmp];
-
-	ret = af9035_rd_reg(d, EEPROM_IR_MODE, &tmp);
-	if (ret < 0)
-		goto err;
-	pr_debug("%s: ir_mode=%02x\n", __func__, tmp);
-
-	/* don't activate rc if in HID mode or if not available */
-	if (tmp == 5) {
-		ret = af9035_rd_reg(d, EEPROM_IR_TYPE, &tmp);
-		if (ret < 0)
-			goto err;
-		pr_debug("%s: ir_type=%02x\n", __func__, tmp);
-
-		switch (tmp) {
-		case 0: /* NEC */
-		default:
-			d->props.rc.core.protocol = RC_TYPE_NEC;
-			d->props.rc.core.allowed_protos = RC_TYPE_NEC;
-			break;
-		case 1: /* RC6 */
-			d->props.rc.core.protocol = RC_TYPE_RC6;
-			d->props.rc.core.allowed_protos = RC_TYPE_RC6;
-			break;
-		}
-		d->props.rc.core.rc_query = af9035_rc_query;
-	}
-
-	return 0;
-
-err:
-	pr_debug("%s: failed=%d\n", __func__, ret);
-
-	return ret;
-}
-
-/* abuse that callback as there is no better one for reading eeprom */
-static int af9035_read_mac_address_it9135(struct dvb_usb_device *d, u8 mac[6])
-{
-	struct state *state = d->priv;
-	int ret, i;
-	u8 tmp;
-
-	state->dual_mode = false;
-
-	/* get demod clock */
-	ret = af9035_rd_reg(d, 0x00d800, &tmp);
-	if (ret < 0)
-		goto err;
-
-	tmp = (tmp >> 0) & 0x0f;
-
-	for (i = 0; i < af9035_properties[0].num_adapters; i++)
-		state->af9033_config[i].clock = clock_lut_it9135[tmp];
-
-	return 0;
-
-err:
-	pr_debug("%s: failed=%d\n", __func__, ret);
-
-	return ret;
-}
-
-static int af9035_fc0011_tuner_callback(struct dvb_usb_device *d,
-		int cmd, int arg)
-{
-	int ret;
-
-	switch (cmd) {
-	case FC0011_FE_CALLBACK_POWER:
-		/* Tuner enable */
-		ret = af9035_wr_reg_mask(d, 0xd8eb, 1, 1);
-		if (ret < 0)
-			goto err;
-
-		ret = af9035_wr_reg_mask(d, 0xd8ec, 1, 1);
-		if (ret < 0)
-			goto err;
-
-		ret = af9035_wr_reg_mask(d, 0xd8ed, 1, 1);
-		if (ret < 0)
-			goto err;
-
-		/* LED */
-		ret = af9035_wr_reg_mask(d, 0xd8d0, 1, 1);
-		if (ret < 0)
-			goto err;
-
-		ret = af9035_wr_reg_mask(d, 0xd8d1, 1, 1);
-		if (ret < 0)
-			goto err;
-
-		usleep_range(10000, 50000);
-		break;
-	case FC0011_FE_CALLBACK_RESET:
-		ret = af9035_wr_reg(d, 0xd8e9, 1);
-		if (ret < 0)
-			goto err;
-
-		ret = af9035_wr_reg(d, 0xd8e8, 1);
-		if (ret < 0)
-			goto err;
-
-		ret = af9035_wr_reg(d, 0xd8e7, 1);
-		if (ret < 0)
-			goto err;
-
-		usleep_range(10000, 20000);
-
-		ret = af9035_wr_reg(d, 0xd8e7, 0);
-		if (ret < 0)
-			goto err;
-
-		usleep_range(10000, 20000);
-		break;
-	default:
-		ret = -EINVAL;
-		goto err;
-	}
-
-	return 0;
-
-err:
-	pr_debug("%s: failed=%d\n", __func__, ret);
-
-	return ret;
-}
-
-static int af9035_tuner_callback(struct dvb_usb_device *d, int cmd, int arg)
-{
-	struct state *state = d->priv;
-
-	switch (state->af9033_config[0].tuner) {
-	case AF9033_TUNER_FC0011:
-		return af9035_fc0011_tuner_callback(d, cmd, arg);
-	default:
-		break;
-	}
-
-	return -ENODEV;
-}
-
-static int af9035_frontend_callback(void *adapter_priv, int component,
-				    int cmd, int arg)
-{
-	struct i2c_adapter *adap = adapter_priv;
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-
-	switch (component) {
-	case DVB_FRONTEND_COMPONENT_TUNER:
-		return af9035_tuner_callback(d, cmd, arg);
-	default:
-		break;
-	}
-
-	return -EINVAL;
-}
-
-static int af9035_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct state *state = adap->dev->priv;
-	int ret;
-
-	if (!state->af9033_config[adap->id].tuner) {
-		/* unsupported tuner */
-		ret = -ENODEV;
-		goto err;
-	}
-
-	if (adap->id == 0) {
-		state->af9033_config[0].ts_mode = AF9033_TS_MODE_USB;
-		state->af9033_config[1].ts_mode = AF9033_TS_MODE_SERIAL;
-
-		ret = af9035_wr_reg(adap->dev, 0x00417f,
-				state->af9033_config[1].i2c_addr);
-		if (ret < 0)
-			goto err;
-
-		ret = af9035_wr_reg(adap->dev, 0x00d81a,
-				state->dual_mode);
-		if (ret < 0)
-			goto err;
-	}
-
-	/* attach demodulator */
-	adap->fe_adap[0].fe = dvb_attach(af9033_attach,
-			&state->af9033_config[adap->id], &adap->dev->i2c_adap);
-	if (adap->fe_adap[0].fe == NULL) {
-		ret = -ENODEV;
-		goto err;
-	}
-
-	/* disable I2C-gate */
-	adap->fe_adap[0].fe->ops.i2c_gate_ctrl = NULL;
-	adap->fe_adap[0].fe->callback = af9035_frontend_callback;
-
-	return 0;
-
-err:
-	pr_debug("%s: failed=%d\n", __func__, ret);
-
-	return ret;
-}
-
-static struct tua9001_config af9035_tua9001_config = {
-	.i2c_addr = 0x60,
-};
-
-static const struct fc0011_config af9035_fc0011_config = {
-	.i2c_address = 0x60,
-};
-
-static struct mxl5007t_config af9035_mxl5007t_config = {
-	.xtal_freq_hz = MxL_XTAL_24_MHZ,
-	.if_freq_hz = MxL_IF_4_57_MHZ,
-	.invert_if = 0,
-	.loop_thru_enable = 0,
-	.clk_out_enable = 0,
-	.clk_out_amp = MxL_CLKOUT_AMP_0_94V,
-};
-
-static struct tda18218_config af9035_tda18218_config = {
-	.i2c_address = 0x60,
-	.i2c_wr_max = 21,
-};
-
-static int af9035_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct state *state = adap->dev->priv;
-	int ret;
-	struct dvb_frontend *fe;
-
-	switch (state->af9033_config[adap->id].tuner) {
-	case AF9033_TUNER_TUA9001:
-		/* AF9035 gpiot3 = TUA9001 RESETN
-		   AF9035 gpiot2 = TUA9001 RXEN */
-
-		/* configure gpiot2 and gpiot2 as output */
-		ret = af9035_wr_reg_mask(adap->dev, 0x00d8ec, 0x01, 0x01);
-		if (ret < 0)
-			goto err;
-
-		ret = af9035_wr_reg_mask(adap->dev, 0x00d8ed, 0x01, 0x01);
-		if (ret < 0)
-			goto err;
-
-		ret = af9035_wr_reg_mask(adap->dev, 0x00d8e8, 0x01, 0x01);
-		if (ret < 0)
-			goto err;
-
-		ret = af9035_wr_reg_mask(adap->dev, 0x00d8e9, 0x01, 0x01);
-		if (ret < 0)
-			goto err;
-
-		/* reset tuner */
-		ret = af9035_wr_reg_mask(adap->dev, 0x00d8e7, 0x00, 0x01);
-		if (ret < 0)
-			goto err;
-
-		usleep_range(2000, 20000);
-
-		ret = af9035_wr_reg_mask(adap->dev, 0x00d8e7, 0x01, 0x01);
-		if (ret < 0)
-			goto err;
-
-		/* activate tuner RX */
-		/* TODO: use callback for TUA9001 RXEN */
-		ret = af9035_wr_reg_mask(adap->dev, 0x00d8eb, 0x01, 0x01);
-		if (ret < 0)
-			goto err;
-
-		/* attach tuner */
-		fe = dvb_attach(tua9001_attach, adap->fe_adap[0].fe,
-				&adap->dev->i2c_adap, &af9035_tua9001_config);
-		break;
-	case AF9033_TUNER_FC0011:
-		fe = dvb_attach(fc0011_attach, adap->fe_adap[0].fe,
-				&adap->dev->i2c_adap, &af9035_fc0011_config);
-		break;
-	case AF9033_TUNER_MXL5007T:
-		ret = af9035_wr_reg(adap->dev, 0x00d8e0, 1);
-		if (ret < 0)
-			goto err;
-		ret = af9035_wr_reg(adap->dev, 0x00d8e1, 1);
-		if (ret < 0)
-			goto err;
-		ret = af9035_wr_reg(adap->dev, 0x00d8df, 0);
-		if (ret < 0)
-			goto err;
-
-		msleep(30);
-
-		ret = af9035_wr_reg(adap->dev, 0x00d8df, 1);
-		if (ret < 0)
-			goto err;
-
-		msleep(300);
-
-		ret = af9035_wr_reg(adap->dev, 0x00d8c0, 1);
-		if (ret < 0)
-			goto err;
-		ret = af9035_wr_reg(adap->dev, 0x00d8c1, 1);
-		if (ret < 0)
-			goto err;
-		ret = af9035_wr_reg(adap->dev, 0x00d8bf, 0);
-		if (ret < 0)
-			goto err;
-		ret = af9035_wr_reg(adap->dev, 0x00d8b4, 1);
-		if (ret < 0)
-			goto err;
-		ret = af9035_wr_reg(adap->dev, 0x00d8b5, 1);
-		if (ret < 0)
-			goto err;
-		ret = af9035_wr_reg(adap->dev, 0x00d8b3, 1);
-		if (ret < 0)
-			goto err;
-
-		/* attach tuner */
-		fe = dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe,
-				&adap->dev->i2c_adap, 0x60, &af9035_mxl5007t_config);
-		break;
-	case AF9033_TUNER_TDA18218:
-		/* attach tuner */
-		fe = dvb_attach(tda18218_attach, adap->fe_adap[0].fe,
-				&adap->dev->i2c_adap, &af9035_tda18218_config);
-		break;
-	default:
-		fe = NULL;
-	}
-
-	if (fe == NULL) {
-		ret = -ENODEV;
-		goto err;
-	}
-
-	return 0;
-
-err:
-	pr_debug("%s: failed=%d\n", __func__, ret);
-
-	return ret;
-}
-
-enum af9035_id_entry {
-	AF9035_15A4_9035,
-	AF9035_15A4_1000,
-	AF9035_15A4_1001,
-	AF9035_15A4_1002,
-	AF9035_15A4_1003,
-	AF9035_0CCD_0093,
-	AF9035_07CA_A835,
-	AF9035_07CA_B835,
-	AF9035_07CA_1867,
-	AF9035_07CA_A867,
-	AF9035_07CA_0825,
-};
-
-static struct usb_device_id af9035_id[] = {
-	[AF9035_15A4_9035] = {
-		USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_9035)},
-	[AF9035_15A4_1000] = {
-		USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1000)},
-	[AF9035_15A4_1001] = {
-		USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1001)},
-	[AF9035_15A4_1002] = {
-		USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1002)},
-	[AF9035_15A4_1003] = {
-		USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1003)},
-	[AF9035_0CCD_0093] = {
-		USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK)},
-	[AF9035_07CA_A835] = {
-		USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835)},
-	[AF9035_07CA_B835] = {
-		USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_B835)},
-	[AF9035_07CA_1867] = {
-		USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_1867)},
-	[AF9035_07CA_A867] = {
-		USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A867)},
-	[AF9035_07CA_0825] = {
-		USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_TWINSTAR)},
-	{},
-};
-
-MODULE_DEVICE_TABLE(usb, af9035_id);
-
-static struct dvb_usb_device_properties af9035_properties[] = {
-	{
-		.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-		.usb_ctrl = DEVICE_SPECIFIC,
-		.download_firmware = af9035_download_firmware,
-		.firmware = "dvb-usb-af9035-02.fw",
-		.no_reconnect = 1,
-
-		.size_of_priv = sizeof(struct state),
-
-		.num_adapters = 1,
-		.adapter = {
-			{
-				.num_frontends = 1,
-				.fe = {
-					{
-						.frontend_attach = af9035_frontend_attach,
-						.tuner_attach = af9035_tuner_attach,
-						.stream = {
-							.type = USB_BULK,
-							.count = 6,
-							.endpoint = 0x84,
-							.u = {
-								.bulk = {
-									.buffersize = (87 * 188),
-								}
-							}
-						}
-					}
-				}
-			}
-		},
-
-		.identify_state = af9035_identify_state,
-		.read_mac_address = af9035_read_mac_address,
-
-		.i2c_algo = &af9035_i2c_algo,
-
-		.rc.core = {
-			.protocol       = RC_TYPE_UNKNOWN,
-			.module_name    = "af9035",
-			.rc_query       = NULL,
-			.rc_interval    = AF9035_POLL,
-			.allowed_protos = RC_TYPE_UNKNOWN,
-			.rc_codes       = RC_MAP_EMPTY,
-		},
-		.num_device_descs = 5,
-		.devices = {
-			{
-				.name = "Afatech AF9035 reference design",
-				.cold_ids = {
-					&af9035_id[AF9035_15A4_9035],
-					&af9035_id[AF9035_15A4_1000],
-					&af9035_id[AF9035_15A4_1001],
-					&af9035_id[AF9035_15A4_1002],
-					&af9035_id[AF9035_15A4_1003],
-				},
-			}, {
-				.name = "TerraTec Cinergy T Stick",
-				.cold_ids = {
-					&af9035_id[AF9035_0CCD_0093],
-				},
-			}, {
-				.name = "AVerMedia AVerTV Volar HD/PRO (A835)",
-				.cold_ids = {
-					&af9035_id[AF9035_07CA_A835],
-					&af9035_id[AF9035_07CA_B835],
-				},
-			}, {
-				.name = "AVerMedia HD Volar (A867)",
-				.cold_ids = {
-					&af9035_id[AF9035_07CA_1867],
-					&af9035_id[AF9035_07CA_A867],
-				},
-			}, {
-				.name = "AVerMedia Twinstar (A825)",
-				.cold_ids = {
-					&af9035_id[AF9035_07CA_0825],
-				},
-			},
-		}
-	},
-	{
-		.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-		.usb_ctrl = DEVICE_SPECIFIC,
-		.download_firmware = af9035_download_firmware_it9135,
-		.firmware = "dvb-usb-it9135-01.fw",
-		.no_reconnect = 1,
-
-		.size_of_priv = sizeof(struct state),
-
-		.num_adapters = 1,
-		.adapter = {
-			{
-				.num_frontends = 1,
-				.fe = {
-					{
-						.frontend_attach = af9035_frontend_attach,
-						.tuner_attach = af9035_tuner_attach,
-						.stream = {
-							.type = USB_BULK,
-							.count = 6,
-							.endpoint = 0x84,
-							.u = {
-								.bulk = {
-									.buffersize = (87 * 188),
-								}
-							}
-						}
-					}
-				}
-			}
-		},
-
-		.identify_state = af9035_identify_state,
-		.read_mac_address = af9035_read_mac_address_it9135,
-
-		.i2c_algo = &af9035_i2c_algo,
-
-		.num_device_descs = 0, /* disabled as no support for IT9135 */
-		.devices = {
-			{
-				.name = "ITE Tech. IT9135 reference design",
-			},
-		}
-	},
-};
-
-static int af9035_usb_probe(struct usb_interface *intf,
-			    const struct usb_device_id *id)
-{
-	int ret, i;
-	struct dvb_usb_device *d = NULL;
-	struct usb_device *udev;
-	bool found;
-
-	pr_debug("%s: interface=%d\n", __func__,
-			intf->cur_altsetting->desc.bInterfaceNumber);
-
-	/* interface 0 is used by DVB-T receiver and
-	   interface 1 is for remote controller (HID) */
-	if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
-		return 0;
-
-	/* Dynamic USB ID support. Replaces first device ID with current one. */
-	udev = interface_to_usbdev(intf);
-
-	for (i = 0, found = false; i < ARRAY_SIZE(af9035_id) - 1; i++) {
-		if (af9035_id[i].idVendor ==
-				le16_to_cpu(udev->descriptor.idVendor) &&
-				af9035_id[i].idProduct ==
-				le16_to_cpu(udev->descriptor.idProduct)) {
-			found = true;
-			break;
-		}
-	}
-
-	if (!found) {
-		pr_debug("%s: using dynamic ID %04x:%04x\n", __func__,
-				le16_to_cpu(udev->descriptor.idVendor),
-				le16_to_cpu(udev->descriptor.idProduct));
-		af9035_properties[0].devices[0].cold_ids[0]->idVendor =
-				le16_to_cpu(udev->descriptor.idVendor);
-		af9035_properties[0].devices[0].cold_ids[0]->idProduct =
-				le16_to_cpu(udev->descriptor.idProduct);
-	}
-
-
-	for (i = 0; i < af9035_properties_count; i++) {
-		ret = dvb_usb_device_init(intf, &af9035_properties[i],
-				THIS_MODULE, &d, adapter_nr);
-
-		if (ret == -ENODEV)
-			continue;
-		else
-			break;
-	}
-
-	if (ret < 0)
-		goto err;
-
-	if (d) {
-		ret = af9035_init(d);
-		if (ret < 0)
-			goto err;
-	}
-
-	return 0;
-
-err:
-	pr_debug("%s: failed=%d\n", __func__, ret);
-
-	return ret;
-}
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver af9035_usb_driver = {
-	.name = "dvb_usb_af9035",
-	.probe = af9035_usb_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table = af9035_id,
-};
-
-module_usb_driver(af9035_usb_driver);
-
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_DESCRIPTION("Afatech AF9035 driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/af9035.h b/drivers/media/dvb/dvb-usb/af9035.h
deleted file mode 100644
index 481a1a4..0000000
--- a/drivers/media/dvb/dvb-usb/af9035.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Afatech AF9035 DVB USB driver
- *
- * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
- * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef AF9035_H
-#define AF9035_H
-
-/* prefix for dvb-usb log writings */
-#define DVB_USB_LOG_PREFIX "af9035"
-
-#include "dvb-usb.h"
-#include "af9033.h"
-#include "tua9001.h"
-#include "fc0011.h"
-#include "mxl5007t.h"
-#include "tda18218.h"
-
-struct reg_val {
-	u32 reg;
-	u8  val;
-};
-
-struct reg_val_mask {
-	u32 reg;
-	u8  val;
-	u8  mask;
-};
-
-struct usb_req {
-	u8  cmd;
-	u8  mbox;
-	u8  wlen;
-	u8  *wbuf;
-	u8  rlen;
-	u8  *rbuf;
-};
-
-struct state {
-	bool dual_mode;
-
-	struct af9033_config af9033_config[2];
-};
-
-u32 clock_lut[] = {
-	20480000, /*      FPGA */
-	16384000, /* 16.38 MHz */
-	20480000, /* 20.48 MHz */
-	36000000, /* 36.00 MHz */
-	30000000, /* 30.00 MHz */
-	26000000, /* 26.00 MHz */
-	28000000, /* 28.00 MHz */
-	32000000, /* 32.00 MHz */
-	34000000, /* 34.00 MHz */
-	24000000, /* 24.00 MHz */
-	22000000, /* 22.00 MHz */
-	12000000, /* 12.00 MHz */
-};
-
-u32 clock_lut_it9135[] = {
-	12000000, /* 12.00 MHz */
-	20480000, /* 20.48 MHz */
-	36000000, /* 36.00 MHz */
-	30000000, /* 30.00 MHz */
-	26000000, /* 26.00 MHz */
-	28000000, /* 28.00 MHz */
-	32000000, /* 32.00 MHz */
-	34000000, /* 34.00 MHz */
-	24000000, /* 24.00 MHz */
-	22000000, /* 22.00 MHz */
-};
-
-/* EEPROM locations */
-#define EEPROM_IR_MODE            0x430d
-#define EEPROM_DUAL_MODE          0x4326
-#define EEPROM_IR_TYPE            0x4329
-#define EEPROM_1_IFFREQ_L         0x432d
-#define EEPROM_1_IFFREQ_H         0x432e
-#define EEPROM_1_TUNER_ID         0x4331
-#define EEPROM_2_IFFREQ_L         0x433d
-#define EEPROM_2_IFFREQ_H         0x433e
-#define EEPROM_2_TUNER_ID         0x4341
-
-/* USB commands */
-#define CMD_MEM_RD                  0x00
-#define CMD_MEM_WR                  0x01
-#define CMD_I2C_RD                  0x02
-#define CMD_I2C_WR                  0x03
-#define CMD_IR_GET                  0x18
-#define CMD_FW_DL                   0x21
-#define CMD_FW_QUERYINFO            0x22
-#define CMD_FW_BOOT                 0x23
-#define CMD_FW_DL_BEGIN             0x24
-#define CMD_FW_DL_END               0x25
-#define CMD_FW_SCATTER_WR           0x29
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
deleted file mode 100644
index 03c2865..0000000
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ /dev/null
@@ -1,1406 +0,0 @@
-/*
- * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
- *
- * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * TODO:
- * - add smart card reader support for Conditional Access (CA)
- *
- * Card reader in Anysee is nothing more than ISO 7816 card reader.
- * There is no hardware CAM in any Anysee device sold.
- * In my understanding it should be implemented by making own module
- * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This
- * module registers serial interface that can be used to communicate
- * with any ISO 7816 smart card.
- *
- * Any help according to implement serial smart card reader support
- * is highly welcome!
- */
-
-#include "anysee.h"
-#include "tda1002x.h"
-#include "mt352.h"
-#include "mt352_priv.h"
-#include "zl10353.h"
-#include "tda18212.h"
-#include "cx24116.h"
-#include "stv0900.h"
-#include "stv6110.h"
-#include "isl6423.h"
-#include "cxd2820r.h"
-
-/* debug */
-static int dvb_usb_anysee_debug;
-module_param_named(debug, dvb_usb_anysee_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
-static int dvb_usb_anysee_delsys;
-module_param_named(delsys, dvb_usb_anysee_delsys, int, 0644);
-MODULE_PARM_DESC(delsys, "select delivery mode (0=DVB-C, 1=DVB-T)");
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static DEFINE_MUTEX(anysee_usb_mutex);
-
-static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen,
-	u8 *rbuf, u8 rlen)
-{
-	struct anysee_state *state = d->priv;
-	int act_len, ret, i;
-	u8 buf[64];
-
-	memcpy(&buf[0], sbuf, slen);
-	buf[60] = state->seq++;
-
-	if (mutex_lock_interruptible(&anysee_usb_mutex) < 0)
-		return -EAGAIN;
-
-	deb_xfer(">>> ");
-	debug_dump(buf, slen, deb_xfer);
-
-	/* We need receive one message more after dvb_usb_generic_rw due
-	   to weird transaction flow, which is 1 x send + 2 x receive. */
-	ret = dvb_usb_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf), 0);
-	if (ret)
-		goto error_unlock;
-
-	/* TODO FIXME: dvb_usb_generic_rw() fails rarely with error code -32
-	 * (EPIPE, Broken pipe). Function supports currently msleep() as a
-	 * parameter but I would not like to use it, since according to
-	 * Documentation/timers/timers-howto.txt it should not be used such
-	 * short, under < 20ms, sleeps. Repeating failed message would be
-	 * better choice as not to add unwanted delays...
-	 * Fixing that correctly is one of those or both;
-	 * 1) use repeat if possible
-	 * 2) add suitable delay
-	 */
-
-	/* get answer, retry few times if error returned */
-	for (i = 0; i < 3; i++) {
-		/* receive 2nd answer */
-		ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev,
-			d->props.generic_bulk_ctrl_endpoint), buf, sizeof(buf),
-			&act_len, 2000);
-
-		if (ret) {
-			deb_info("%s: recv bulk message failed: %d",
-					__func__, ret);
-		} else {
-			deb_xfer("<<< ");
-			debug_dump(buf, rlen, deb_xfer);
-
-			if (buf[63] != 0x4f)
-				deb_info("%s: cmd failed\n", __func__);
-
-			break;
-		}
-	}
-
-	if (ret) {
-		/* all retries failed, it is fatal */
-		err("%s: recv bulk message failed: %d", __func__, ret);
-		goto error_unlock;
-	}
-
-	/* read request, copy returned data to return buf */
-	if (rbuf && rlen)
-		memcpy(rbuf, buf, rlen);
-
-error_unlock:
-	mutex_unlock(&anysee_usb_mutex);
-
-	return ret;
-}
-
-static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val)
-{
-	u8 buf[] = {CMD_REG_READ, reg >> 8, reg & 0xff, 0x01};
-	int ret;
-	ret = anysee_ctrl_msg(d, buf, sizeof(buf), val, 1);
-	deb_info("%s: reg:%04x val:%02x\n", __func__, reg, *val);
-	return ret;
-}
-
-static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val)
-{
-	u8 buf[] = {CMD_REG_WRITE, reg >> 8, reg & 0xff, 0x01, val};
-	deb_info("%s: reg:%04x val:%02x\n", __func__, reg, val);
-	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
-}
-
-/* write single register with mask */
-static int anysee_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val,
-	u8 mask)
-{
-	int ret;
-	u8 tmp;
-
-	/* no need for read if whole reg is written */
-	if (mask != 0xff) {
-		ret = anysee_read_reg(d, reg, &tmp);
-		if (ret)
-			return ret;
-
-		val &= mask;
-		tmp &= ~mask;
-		val |= tmp;
-	}
-
-	return anysee_write_reg(d, reg, val);
-}
-
-/* read single register with mask */
-static int anysee_rd_reg_mask(struct dvb_usb_device *d, u16 reg, u8 *val,
-	u8 mask)
-{
-	int ret, i;
-	u8 tmp;
-
-	ret = anysee_read_reg(d, reg, &tmp);
-	if (ret)
-		return ret;
-
-	tmp &= mask;
-
-	/* find position of the first bit */
-	for (i = 0; i < 8; i++) {
-		if ((mask >> i) & 0x01)
-			break;
-	}
-	*val = tmp >> i;
-
-	return 0;
-}
-
-static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id)
-{
-	u8 buf[] = {CMD_GET_HW_INFO};
-	return anysee_ctrl_msg(d, buf, sizeof(buf), id, 3);
-}
-
-static int anysee_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	u8 buf[] = {CMD_STREAMING_CTRL, (u8)onoff, 0x00};
-	deb_info("%s: onoff:%02x\n", __func__, onoff);
-	return anysee_ctrl_msg(adap->dev, buf, sizeof(buf), NULL, 0);
-}
-
-static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval)
-{
-	u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x01, mode, interval};
-	deb_info("%s: state:%02x interval:%02x\n", __func__, mode, interval);
-	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
-}
-
-static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff)
-{
-	u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x02, onoff};
-	deb_info("%s: onoff:%02x\n", __func__, onoff);
-	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
-}
-
-/* I2C */
-static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
-	int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	int ret = 0, inc, i = 0;
-	u8 buf[52]; /* 4 + 48 (I2C WR USB command header + I2C WR max) */
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	while (i < num) {
-		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
-			if (msg[i].len > 2 || msg[i+1].len > 60) {
-				ret = -EOPNOTSUPP;
-				break;
-			}
-			buf[0] = CMD_I2C_READ;
-			buf[1] = (msg[i].addr << 1) | 0x01;
-			buf[2] = msg[i].buf[0];
-			buf[3] = msg[i].buf[1];
-			buf[4] = msg[i].len-1;
-			buf[5] = msg[i+1].len;
-			ret = anysee_ctrl_msg(d, buf, 6, msg[i+1].buf,
-				msg[i+1].len);
-			inc = 2;
-		} else {
-			if (msg[i].len > 48) {
-				ret = -EOPNOTSUPP;
-				break;
-			}
-			buf[0] = CMD_I2C_WRITE;
-			buf[1] = (msg[i].addr << 1);
-			buf[2] = msg[i].len;
-			buf[3] = 0x01;
-			memcpy(&buf[4], msg[i].buf, msg[i].len);
-			ret = anysee_ctrl_msg(d, buf, 4 + msg[i].len, NULL, 0);
-			inc = 1;
-		}
-		if (ret)
-			break;
-
-		i += inc;
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-
-	return ret ? ret : i;
-}
-
-static u32 anysee_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm anysee_i2c_algo = {
-	.master_xfer   = anysee_master_xfer,
-	.functionality = anysee_i2c_func,
-};
-
-static int anysee_mt352_demod_init(struct dvb_frontend *fe)
-{
-	static u8 clock_config[]   = { CLOCK_CTL,  0x38, 0x28 };
-	static u8 reset[]          = { RESET,      0x80 };
-	static u8 adc_ctl_1_cfg[]  = { ADC_CTL_1,  0x40 };
-	static u8 agc_cfg[]        = { AGC_TARGET, 0x28, 0x20 };
-	static u8 gpp_ctl_cfg[]    = { GPP_CTL,    0x33 };
-	static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
-
-	mt352_write(fe, clock_config,   sizeof(clock_config));
-	udelay(200);
-	mt352_write(fe, reset,          sizeof(reset));
-	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
-
-	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
-	mt352_write(fe, gpp_ctl_cfg,    sizeof(gpp_ctl_cfg));
-	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
-
-	return 0;
-}
-
-/* Callbacks for DVB USB */
-static struct tda10023_config anysee_tda10023_config = {
-	.demod_address = (0x1a >> 1),
-	.invert = 0,
-	.xtal   = 16000000,
-	.pll_m  = 11,
-	.pll_p  = 3,
-	.pll_n  = 1,
-	.output_mode = TDA10023_OUTPUT_MODE_PARALLEL_C,
-	.deltaf = 0xfeeb,
-};
-
-static struct mt352_config anysee_mt352_config = {
-	.demod_address = (0x1e >> 1),
-	.demod_init    = anysee_mt352_demod_init,
-};
-
-static struct zl10353_config anysee_zl10353_config = {
-	.demod_address = (0x1e >> 1),
-	.parallel_ts = 1,
-};
-
-static struct zl10353_config anysee_zl10353_tda18212_config2 = {
-	.demod_address = (0x1e >> 1),
-	.parallel_ts = 1,
-	.disable_i2c_gate_ctrl = 1,
-	.no_tuner = 1,
-	.if2 = 41500,
-};
-
-static struct zl10353_config anysee_zl10353_tda18212_config = {
-	.demod_address = (0x18 >> 1),
-	.parallel_ts = 1,
-	.disable_i2c_gate_ctrl = 1,
-	.no_tuner = 1,
-	.if2 = 41500,
-};
-
-static struct tda10023_config anysee_tda10023_tda18212_config = {
-	.demod_address = (0x1a >> 1),
-	.xtal   = 16000000,
-	.pll_m  = 12,
-	.pll_p  = 3,
-	.pll_n  = 1,
-	.output_mode = TDA10023_OUTPUT_MODE_PARALLEL_B,
-	.deltaf = 0xba02,
-};
-
-static struct tda18212_config anysee_tda18212_config = {
-	.i2c_address = (0xc0 >> 1),
-	.if_dvbt_6 = 4150,
-	.if_dvbt_7 = 4150,
-	.if_dvbt_8 = 4150,
-	.if_dvbc = 5000,
-};
-
-static struct tda18212_config anysee_tda18212_config2 = {
-	.i2c_address = 0x60 /* (0xc0 >> 1) */,
-	.if_dvbt_6 = 3550,
-	.if_dvbt_7 = 3700,
-	.if_dvbt_8 = 4150,
-	.if_dvbt2_6 = 3250,
-	.if_dvbt2_7 = 4000,
-	.if_dvbt2_8 = 4000,
-	.if_dvbc = 5000,
-};
-
-static struct cx24116_config anysee_cx24116_config = {
-	.demod_address = (0xaa >> 1),
-	.mpg_clk_pos_pol = 0x00,
-	.i2c_wr_max = 48,
-};
-
-static struct stv0900_config anysee_stv0900_config = {
-	.demod_address = (0xd0 >> 1),
-	.demod_mode = 0,
-	.xtal = 8000000,
-	.clkmode = 3,
-	.diseqc_mode = 2,
-	.tun1_maddress = 0,
-	.tun1_adc = 1, /* 1 Vpp */
-	.path1_mode = 3,
-};
-
-static struct stv6110_config anysee_stv6110_config = {
-	.i2c_address = (0xc0 >> 1),
-	.mclk = 16000000,
-	.clk_div = 1,
-};
-
-static struct isl6423_config anysee_isl6423_config = {
-	.current_max = SEC_CURRENT_800m,
-	.curlim  = SEC_CURRENT_LIM_OFF,
-	.mod_extern = 1,
-	.addr = (0x10 >> 1),
-};
-
-static struct cxd2820r_config anysee_cxd2820r_config = {
-	.i2c_address = 0x6d, /* (0xda >> 1) */
-	.ts_mode = 0x38,
-};
-
-/*
- * New USB device strings: Mfr=1, Product=2, SerialNumber=0
- * Manufacturer: AMT.CO.KR
- *
- * E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=????????
- * PCB: ?
- * parts: DNOS404ZH102A(MT352, DTT7579(?))
- *
- * E30 VID=04b4 PID=861f HW=2 FW=2.1 "anysee-T(LP)"
- * PCB: PCB 507T (rev1.61)
- * parts: DNOS404ZH103A(ZL10353, DTT7579(?))
- * OEA=0a OEB=00 OEC=00 OED=ff OEE=00
- * IOA=45 IOB=ff IOC=00 IOD=ff IOE=00
- *
- * E30 Plus VID=04b4 PID=861f HW=6 FW=1.0 "anysee"
- * PCB: 507CD (rev1.1)
- * parts: DNOS404ZH103A(ZL10353, DTT7579(?)), CST56I01
- * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe
- * IOA=4f IOB=ff IOC=00 IOD=06 IOE=01
- * IOD[0] ZL10353 1=enabled
- * IOA[7] TS 0=enabled
- * tuner is not behind ZL10353 I2C-gate (no care if gate disabled or not)
- *
- * E30 C Plus VID=04b4 PID=861f HW=10 FW=1.0 "anysee-DC(LP)"
- * PCB: 507DC (rev0.2)
- * parts: TDA10023, DTOS403IH102B TM, CST56I01
- * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe
- * IOA=4f IOB=ff IOC=00 IOD=26 IOE=01
- * IOD[0] TDA10023 1=enabled
- *
- * E30 S2 Plus VID=04b4 PID=861f HW=11 FW=0.1 "anysee-S2(LP)"
- * PCB: 507SI (rev2.1)
- * parts: BS2N10WCC01(CX24116, CX24118), ISL6423, TDA8024
- * OEA=80 OEB=00 OEC=ff OED=ff OEE=fe
- * IOA=4d IOB=ff IOC=00 IOD=26 IOE=01
- * IOD[0] CX24116 1=enabled
- *
- * E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
- * PCB: 507FA (rev0.4)
- * parts: TDA10023, DTOS403IH102B TM, TDA8024
- * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff
- * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0
- * IOD[5] TDA10023 1=enabled
- * IOE[0] tuner 1=enabled
- *
- * E30 Combo Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
- * PCB: 507FA (rev1.1)
- * parts: ZL10353, TDA10023, DTOS403IH102B TM, TDA8024
- * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff
- * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0
- * DVB-C:
- * IOD[5] TDA10023 1=enabled
- * IOE[0] tuner 1=enabled
- * DVB-T:
- * IOD[0] ZL10353 1=enabled
- * IOE[0] tuner 0=enabled
- * tuner is behind ZL10353 I2C-gate
- *
- * E7 TC VID=1c73 PID=861f HW=18 FW=0.7 AMTCI=0.5 "anysee-E7TC(LP)"
- * PCB: 508TC (rev0.6)
- * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
- * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
- * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
- * IOA[7] TS 1=enabled
- * IOE[4] TDA18212 1=enabled
- * DVB-C:
- * IOD[6] ZL10353 0=disabled
- * IOD[5] TDA10023 1=enabled
- * IOE[0] IF 1=enabled
- * DVB-T:
- * IOD[5] TDA10023 0=disabled
- * IOD[6] ZL10353 1=enabled
- * IOE[0] IF 0=enabled
- *
- * E7 S2 VID=1c73 PID=861f HW=19 FW=0.4 AMTCI=0.5 "anysee-E7S2(LP)"
- * PCB: 508S2 (rev0.7)
- * parts: DNBU10512IST(STV0903, STV6110), ISL6423
- * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
- * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4
- * IOA[7] TS 1=enabled
- * IOE[5] STV0903 1=enabled
- *
- * E7 T2C VID=1c73 PID=861f HW=20 FW=0.1 AMTCI=0.5 "anysee-E7T2C(LP)"
- * PCB: 508T2C (rev0.3)
- * parts: DNOQ44QCH106A(CXD2820R, TDA18212), TDA8024
- * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
- * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
- * IOA[7] TS 1=enabled
- * IOE[5] CXD2820R 1=enabled
- *
- * E7 PTC VID=1c73 PID=861f HW=21 FW=0.1 AMTCI=?? "anysee-E7PTC(LP)"
- * PCB: 508PTC (rev0.5)
- * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
- * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
- * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
- * IOA[7] TS 1=enabled
- * IOE[4] TDA18212 1=enabled
- * DVB-C:
- * IOD[6] ZL10353 0=disabled
- * IOD[5] TDA10023 1=enabled
- * IOE[0] IF 1=enabled
- * DVB-T:
- * IOD[5] TDA10023 0=disabled
- * IOD[6] ZL10353 1=enabled
- * IOE[0] IF 0=enabled
- *
- * E7 PS2 VID=1c73 PID=861f HW=22 FW=0.1 AMTCI=?? "anysee-E7PS2(LP)"
- * PCB: 508PS2 (rev0.4)
- * parts: DNBU10512IST(STV0903, STV6110), ISL6423
- * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
- * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4
- * IOA[7] TS 1=enabled
- * IOE[5] STV0903 1=enabled
- */
-
-
-/* external I2C gate used for DNOD44CDH086A(TDA18212) tuner module */
-static int anysee_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-
-	/* enable / disable tuner access on IOE[4] */
-	return anysee_wr_reg_mask(adap->dev, REG_IOE, (enable << 4), 0x10);
-}
-
-static int anysee_frontend_ctrl(struct dvb_frontend *fe, int onoff)
-{
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct anysee_state *state = adap->dev->priv;
-	int ret;
-
-	deb_info("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff);
-
-	/* no frontend sleep control */
-	if (onoff == 0)
-		return 0;
-
-	switch (state->hw) {
-	case ANYSEE_HW_507FA: /* 15 */
-		/* E30 Combo Plus */
-		/* E30 C Plus */
-
-		if ((fe->id ^ dvb_usb_anysee_delsys) == 0)  {
-			/* disable DVB-T demod on IOD[0] */
-			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 0),
-				0x01);
-			if (ret)
-				goto error;
-
-			/* enable DVB-C demod on IOD[5] */
-			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
-				0x20);
-			if (ret)
-				goto error;
-
-			/* enable DVB-C tuner on IOE[0] */
-			ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0),
-				0x01);
-			if (ret)
-				goto error;
-		} else {
-			/* disable DVB-C demod on IOD[5] */
-			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
-				0x20);
-			if (ret)
-				goto error;
-
-			/* enable DVB-T demod on IOD[0] */
-			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0),
-				0x01);
-			if (ret)
-				goto error;
-
-			/* enable DVB-T tuner on IOE[0] */
-			ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0),
-				0x01);
-			if (ret)
-				goto error;
-		}
-
-		break;
-	case ANYSEE_HW_508TC: /* 18 */
-	case ANYSEE_HW_508PTC: /* 21 */
-		/* E7 TC */
-		/* E7 PTC */
-
-		if ((fe->id ^ dvb_usb_anysee_delsys) == 0)  {
-			/* disable DVB-T demod on IOD[6] */
-			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 6),
-				0x40);
-			if (ret)
-				goto error;
-
-			/* enable DVB-C demod on IOD[5] */
-			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
-				0x20);
-			if (ret)
-				goto error;
-
-			/* enable IF route on IOE[0] */
-			ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0),
-				0x01);
-			if (ret)
-				goto error;
-		} else {
-			/* disable DVB-C demod on IOD[5] */
-			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
-				0x20);
-			if (ret)
-				goto error;
-
-			/* enable DVB-T demod on IOD[6] */
-			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 6),
-				0x40);
-			if (ret)
-				goto error;
-
-			/* enable IF route on IOE[0] */
-			ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0),
-				0x01);
-			if (ret)
-				goto error;
-		}
-
-		break;
-	default:
-		ret = 0;
-	}
-
-error:
-	return ret;
-}
-
-static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	int ret;
-	struct anysee_state *state = adap->dev->priv;
-	u8 hw_info[3];
-	u8 tmp;
-	struct i2c_msg msg[2] = {
-		{
-			.addr = anysee_tda18212_config.i2c_address,
-			.flags = 0,
-			.len = 1,
-			.buf = "\x00",
-		}, {
-			.addr = anysee_tda18212_config.i2c_address,
-			.flags = I2C_M_RD,
-			.len = 1,
-			.buf = &tmp,
-		}
-	};
-
-	/* detect hardware only once */
-	if (adap->fe_adap[0].fe == NULL) {
-		/* Check which hardware we have.
-		 * We must do this call two times to get reliable values
-		 * (hw/fw bug).
-		 */
-		ret = anysee_get_hw_info(adap->dev, hw_info);
-		if (ret)
-			goto error;
-
-		ret = anysee_get_hw_info(adap->dev, hw_info);
-		if (ret)
-			goto error;
-
-		/* Meaning of these info bytes are guessed. */
-		info("firmware version:%d.%d hardware id:%d",
-			hw_info[1], hw_info[2], hw_info[0]);
-
-		state->hw = hw_info[0];
-	}
-
-	/* set current frondend ID for devices having two frondends */
-	if (adap->fe_adap[0].fe)
-		state->fe_id++;
-
-	switch (state->hw) {
-	case ANYSEE_HW_507T: /* 2 */
-		/* E30 */
-
-		if (state->fe_id)
-			break;
-
-		/* attach demod */
-		adap->fe_adap[0].fe = dvb_attach(mt352_attach,
-			&anysee_mt352_config, &adap->dev->i2c_adap);
-		if (adap->fe_adap[0].fe)
-			break;
-
-		/* attach demod */
-		adap->fe_adap[0].fe = dvb_attach(zl10353_attach,
-			&anysee_zl10353_config, &adap->dev->i2c_adap);
-
-		break;
-	case ANYSEE_HW_507CD: /* 6 */
-		/* E30 Plus */
-
-		if (state->fe_id)
-			break;
-
-		/* enable DVB-T demod on IOD[0] */
-		ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
-		if (ret)
-			goto error;
-
-		/* enable transport stream on IOA[7] */
-		ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (0 << 7), 0x80);
-		if (ret)
-			goto error;
-
-		/* attach demod */
-		adap->fe_adap[0].fe = dvb_attach(zl10353_attach,
-			&anysee_zl10353_config, &adap->dev->i2c_adap);
-
-		break;
-	case ANYSEE_HW_507DC: /* 10 */
-		/* E30 C Plus */
-
-		if (state->fe_id)
-			break;
-
-		/* enable DVB-C demod on IOD[0] */
-		ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
-		if (ret)
-			goto error;
-
-		/* attach demod */
-		adap->fe_adap[0].fe = dvb_attach(tda10023_attach,
-			&anysee_tda10023_config, &adap->dev->i2c_adap, 0x48);
-
-		break;
-	case ANYSEE_HW_507SI: /* 11 */
-		/* E30 S2 Plus */
-
-		if (state->fe_id)
-			break;
-
-		/* enable DVB-S/S2 demod on IOD[0] */
-		ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
-		if (ret)
-			goto error;
-
-		/* attach demod */
-		adap->fe_adap[0].fe = dvb_attach(cx24116_attach,
-			&anysee_cx24116_config, &adap->dev->i2c_adap);
-
-		break;
-	case ANYSEE_HW_507FA: /* 15 */
-		/* E30 Combo Plus */
-		/* E30 C Plus */
-
-		/* enable tuner on IOE[4] */
-		ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 4), 0x10);
-		if (ret)
-			goto error;
-
-		/* probe TDA18212 */
-		tmp = 0;
-		ret = i2c_transfer(&adap->dev->i2c_adap, msg, 2);
-		if (ret == 2 && tmp == 0xc7)
-			deb_info("%s: TDA18212 found\n", __func__);
-		else
-			tmp = 0;
-
-		/* disable tuner on IOE[4] */
-		ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 4), 0x10);
-		if (ret)
-			goto error;
-
-		if ((state->fe_id ^ dvb_usb_anysee_delsys) == 0)  {
-			/* disable DVB-T demod on IOD[0] */
-			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 0),
-				0x01);
-			if (ret)
-				goto error;
-
-			/* enable DVB-C demod on IOD[5] */
-			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
-				0x20);
-			if (ret)
-				goto error;
-
-			/* attach demod */
-			if (tmp == 0xc7) {
-				/* TDA18212 config */
-				adap->fe_adap[state->fe_id].fe = dvb_attach(
-					tda10023_attach,
-					&anysee_tda10023_tda18212_config,
-					&adap->dev->i2c_adap, 0x48);
-			} else {
-				/* PLL config */
-				adap->fe_adap[state->fe_id].fe = dvb_attach(
-					tda10023_attach,
-					&anysee_tda10023_config,
-					&adap->dev->i2c_adap, 0x48);
-			}
-		} else {
-			/* disable DVB-C demod on IOD[5] */
-			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
-				0x20);
-			if (ret)
-				goto error;
-
-			/* enable DVB-T demod on IOD[0] */
-			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0),
-				0x01);
-			if (ret)
-				goto error;
-
-			/* attach demod */
-			if (tmp == 0xc7) {
-				/* TDA18212 config */
-				adap->fe_adap[state->fe_id].fe = dvb_attach(
-					zl10353_attach,
-					&anysee_zl10353_tda18212_config2,
-					&adap->dev->i2c_adap);
-			} else {
-				/* PLL config */
-				adap->fe_adap[state->fe_id].fe = dvb_attach(
-					zl10353_attach,
-					&anysee_zl10353_config,
-					&adap->dev->i2c_adap);
-			}
-		}
-
-		/* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
-		if (tmp == 0xc7) {
-			if (adap->fe_adap[state->fe_id].fe)
-				adap->fe_adap[state->fe_id].fe->ops.i2c_gate_ctrl =
-					anysee_i2c_gate_ctrl;
-		}
-
-		break;
-	case ANYSEE_HW_508TC: /* 18 */
-	case ANYSEE_HW_508PTC: /* 21 */
-		/* E7 TC */
-		/* E7 PTC */
-
-		if ((state->fe_id ^ dvb_usb_anysee_delsys) == 0)  {
-			/* disable DVB-T demod on IOD[6] */
-			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 6),
-				0x40);
-			if (ret)
-				goto error;
-
-			/* enable DVB-C demod on IOD[5] */
-			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
-				0x20);
-			if (ret)
-				goto error;
-
-			/* attach demod */
-			adap->fe_adap[state->fe_id].fe =
-				dvb_attach(tda10023_attach,
-				&anysee_tda10023_tda18212_config,
-				&adap->dev->i2c_adap, 0x48);
-		} else {
-			/* disable DVB-C demod on IOD[5] */
-			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
-				0x20);
-			if (ret)
-				goto error;
-
-			/* enable DVB-T demod on IOD[6] */
-			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 6),
-				0x40);
-			if (ret)
-				goto error;
-
-			/* attach demod */
-			adap->fe_adap[state->fe_id].fe =
-				dvb_attach(zl10353_attach,
-				&anysee_zl10353_tda18212_config,
-				&adap->dev->i2c_adap);
-		}
-
-		/* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
-		if (adap->fe_adap[state->fe_id].fe)
-			adap->fe_adap[state->fe_id].fe->ops.i2c_gate_ctrl =
-				anysee_i2c_gate_ctrl;
-
-		state->has_ci = true;
-
-		break;
-	case ANYSEE_HW_508S2: /* 19 */
-	case ANYSEE_HW_508PS2: /* 22 */
-		/* E7 S2 */
-		/* E7 PS2 */
-
-		if (state->fe_id)
-			break;
-
-		/* enable DVB-S/S2 demod on IOE[5] */
-		ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 5), 0x20);
-		if (ret)
-			goto error;
-
-		/* attach demod */
-		adap->fe_adap[0].fe = dvb_attach(stv0900_attach,
-			&anysee_stv0900_config, &adap->dev->i2c_adap, 0);
-
-		state->has_ci = true;
-
-		break;
-	case ANYSEE_HW_508T2C: /* 20 */
-		/* E7 T2C */
-
-		if (state->fe_id)
-			break;
-
-		/* enable DVB-T/T2/C demod on IOE[5] */
-		ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 5), 0x20);
-		if (ret)
-			goto error;
-
-		/* attach demod */
-		adap->fe_adap[state->fe_id].fe = dvb_attach(cxd2820r_attach,
-				&anysee_cxd2820r_config, &adap->dev->i2c_adap);
-
-		state->has_ci = true;
-
-		break;
-	}
-
-	if (!adap->fe_adap[0].fe) {
-		/* we have no frontend :-( */
-		ret = -ENODEV;
-		err("Unsupported Anysee version. " \
-			"Please report the <linux-media@vger.kernel.org>.");
-	}
-error:
-	return ret;
-}
-
-static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct anysee_state *state = adap->dev->priv;
-	struct dvb_frontend *fe;
-	int ret;
-	deb_info("%s: fe=%d\n", __func__, state->fe_id);
-
-	switch (state->hw) {
-	case ANYSEE_HW_507T: /* 2 */
-		/* E30 */
-
-		/* attach tuner */
-		fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe,
-			(0xc2 >> 1), NULL, DVB_PLL_THOMSON_DTT7579);
-
-		break;
-	case ANYSEE_HW_507CD: /* 6 */
-		/* E30 Plus */
-
-		/* attach tuner */
-		fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe,
-			(0xc2 >> 1), &adap->dev->i2c_adap,
-			DVB_PLL_THOMSON_DTT7579);
-
-		break;
-	case ANYSEE_HW_507DC: /* 10 */
-		/* E30 C Plus */
-
-		/* attach tuner */
-		fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe,
-			(0xc0 >> 1), &adap->dev->i2c_adap,
-			DVB_PLL_SAMSUNG_DTOS403IH102A);
-
-		break;
-	case ANYSEE_HW_507SI: /* 11 */
-		/* E30 S2 Plus */
-
-		/* attach LNB controller */
-		fe = dvb_attach(isl6423_attach, adap->fe_adap[0].fe,
-			&adap->dev->i2c_adap, &anysee_isl6423_config);
-
-		break;
-	case ANYSEE_HW_507FA: /* 15 */
-		/* E30 Combo Plus */
-		/* E30 C Plus */
-
-		/* Try first attach TDA18212 silicon tuner on IOE[4], if that
-		 * fails attach old simple PLL. */
-
-		/* attach tuner */
-		fe = dvb_attach(tda18212_attach, adap->fe_adap[state->fe_id].fe,
-			&adap->dev->i2c_adap, &anysee_tda18212_config);
-		if (fe)
-			break;
-
-		/* attach tuner */
-		fe = dvb_attach(dvb_pll_attach, adap->fe_adap[state->fe_id].fe,
-			(0xc0 >> 1), &adap->dev->i2c_adap,
-			DVB_PLL_SAMSUNG_DTOS403IH102A);
-
-		break;
-	case ANYSEE_HW_508TC: /* 18 */
-	case ANYSEE_HW_508PTC: /* 21 */
-		/* E7 TC */
-		/* E7 PTC */
-
-		/* attach tuner */
-		fe = dvb_attach(tda18212_attach, adap->fe_adap[state->fe_id].fe,
-			&adap->dev->i2c_adap, &anysee_tda18212_config);
-
-		break;
-	case ANYSEE_HW_508S2: /* 19 */
-	case ANYSEE_HW_508PS2: /* 22 */
-		/* E7 S2 */
-		/* E7 PS2 */
-
-		/* attach tuner */
-		fe = dvb_attach(stv6110_attach, adap->fe_adap[0].fe,
-			&anysee_stv6110_config, &adap->dev->i2c_adap);
-
-		if (fe) {
-			/* attach LNB controller */
-			fe = dvb_attach(isl6423_attach, adap->fe_adap[0].fe,
-				&adap->dev->i2c_adap, &anysee_isl6423_config);
-		}
-
-		break;
-
-	case ANYSEE_HW_508T2C: /* 20 */
-		/* E7 T2C */
-
-		/* attach tuner */
-		fe = dvb_attach(tda18212_attach, adap->fe_adap[state->fe_id].fe,
-			&adap->dev->i2c_adap, &anysee_tda18212_config2);
-
-		break;
-	default:
-		fe = NULL;
-	}
-
-	if (fe)
-		ret = 0;
-	else
-		ret = -ENODEV;
-
-	return ret;
-}
-
-static int anysee_rc_query(struct dvb_usb_device *d)
-{
-	u8 buf[] = {CMD_GET_IR_CODE};
-	u8 ircode[2];
-	int ret;
-
-	/* Remote controller is basic NEC using address byte 0x08.
-	   Anysee device RC query returns only two bytes, status and code,
-	   address byte is dropped. Also it does not return any value for
-	   NEC RCs having address byte other than 0x08. Due to that, we
-	   cannot use that device as standard NEC receiver.
-	   It could be possible make hack which reads whole code directly
-	   from device memory... */
-
-	ret = anysee_ctrl_msg(d, buf, sizeof(buf), ircode, sizeof(ircode));
-	if (ret)
-		return ret;
-
-	if (ircode[0]) {
-		deb_rc("%s: key pressed %02x\n", __func__, ircode[1]);
-		rc_keydown(d->rc_dev, 0x08 << 8 | ircode[1], 0);
-	}
-
-	return 0;
-}
-
-static int anysee_ci_read_attribute_mem(struct dvb_ca_en50221 *ci, int slot,
-	int addr)
-{
-	struct dvb_usb_device *d = ci->data;
-	int ret;
-	u8 buf[] = {CMD_CI, 0x02, 0x40 | addr >> 8, addr & 0xff, 0x00, 1};
-	u8 val;
-
-	ret = anysee_ctrl_msg(d, buf, sizeof(buf), &val, 1);
-	if (ret)
-		return ret;
-
-	return val;
-}
-
-static int anysee_ci_write_attribute_mem(struct dvb_ca_en50221 *ci, int slot,
-	int addr, u8 val)
-{
-	struct dvb_usb_device *d = ci->data;
-	int ret;
-	u8 buf[] = {CMD_CI, 0x03, 0x40 | addr >> 8, addr & 0xff, 0x00, 1, val};
-
-	ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static int anysee_ci_read_cam_control(struct dvb_ca_en50221 *ci, int slot,
-	u8 addr)
-{
-	struct dvb_usb_device *d = ci->data;
-	int ret;
-	u8 buf[] = {CMD_CI, 0x04, 0x40, addr, 0x00, 1};
-	u8 val;
-
-	ret = anysee_ctrl_msg(d, buf, sizeof(buf), &val, 1);
-	if (ret)
-		return ret;
-
-	return val;
-}
-
-static int anysee_ci_write_cam_control(struct dvb_ca_en50221 *ci, int slot,
-	u8 addr, u8 val)
-{
-	struct dvb_usb_device *d = ci->data;
-	int ret;
-	u8 buf[] = {CMD_CI, 0x05, 0x40, addr, 0x00, 1, val};
-
-	ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static int anysee_ci_slot_reset(struct dvb_ca_en50221 *ci, int slot)
-{
-	struct dvb_usb_device *d = ci->data;
-	int ret;
-	struct anysee_state *state = d->priv;
-
-	state->ci_cam_ready = jiffies + msecs_to_jiffies(1000);
-
-	ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80);
-	if (ret)
-		return ret;
-
-	msleep(300);
-
-	ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static int anysee_ci_slot_shutdown(struct dvb_ca_en50221 *ci, int slot)
-{
-	struct dvb_usb_device *d = ci->data;
-	int ret;
-
-	ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80);
-	if (ret)
-		return ret;
-
-	msleep(30);
-
-	ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static int anysee_ci_slot_ts_enable(struct dvb_ca_en50221 *ci, int slot)
-{
-	struct dvb_usb_device *d = ci->data;
-	int ret;
-
-	ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 1), 0x02);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static int anysee_ci_poll_slot_status(struct dvb_ca_en50221 *ci, int slot,
-	int open)
-{
-	struct dvb_usb_device *d = ci->data;
-	struct anysee_state *state = d->priv;
-	int ret;
-	u8 tmp;
-
-	ret = anysee_rd_reg_mask(d, REG_IOC, &tmp, 0x40);
-	if (ret)
-		return ret;
-
-	if (tmp == 0) {
-		ret = DVB_CA_EN50221_POLL_CAM_PRESENT;
-		if (time_after(jiffies, state->ci_cam_ready))
-			ret |= DVB_CA_EN50221_POLL_CAM_READY;
-	}
-
-	return ret;
-}
-
-static int anysee_ci_init(struct dvb_usb_device *d)
-{
-	struct anysee_state *state = d->priv;
-	int ret;
-
-	state->ci.owner               = THIS_MODULE;
-	state->ci.read_attribute_mem  = anysee_ci_read_attribute_mem;
-	state->ci.write_attribute_mem = anysee_ci_write_attribute_mem;
-	state->ci.read_cam_control    = anysee_ci_read_cam_control;
-	state->ci.write_cam_control   = anysee_ci_write_cam_control;
-	state->ci.slot_reset          = anysee_ci_slot_reset;
-	state->ci.slot_shutdown       = anysee_ci_slot_shutdown;
-	state->ci.slot_ts_enable      = anysee_ci_slot_ts_enable;
-	state->ci.poll_slot_status    = anysee_ci_poll_slot_status;
-	state->ci.data                = d;
-
-	ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80);
-	if (ret)
-		return ret;
-
-	ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 2)|(0 << 1)|(0 << 0), 0x07);
-	if (ret)
-		return ret;
-
-	ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 2)|(1 << 1)|(1 << 0), 0x07);
-	if (ret)
-		return ret;
-
-	ret = dvb_ca_en50221_init(&d->adapter[0].dvb_adap, &state->ci, 0, 1);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static void anysee_ci_release(struct dvb_usb_device *d)
-{
-	struct anysee_state *state = d->priv;
-
-	/* detach CI */
-	if (state->has_ci)
-		dvb_ca_en50221_release(&state->ci);
-
-	return;
-}
-
-static int anysee_init(struct dvb_usb_device *d)
-{
-	struct anysee_state *state = d->priv;
-	int ret;
-
-	/* LED light */
-	ret = anysee_led_ctrl(d, 0x01, 0x03);
-	if (ret)
-		return ret;
-
-	/* enable IR */
-	ret = anysee_ir_ctrl(d, 1);
-	if (ret)
-		return ret;
-
-	/* attach CI */
-	if (state->has_ci) {
-		ret = anysee_ci_init(d);
-		if (ret) {
-			state->has_ci = false;
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
-/* DVB USB Driver stuff */
-static struct dvb_usb_device_properties anysee_properties;
-
-static int anysee_probe(struct usb_interface *intf,
-			const struct usb_device_id *id)
-{
-	struct dvb_usb_device *d;
-	struct usb_host_interface *alt;
-	int ret;
-
-	/* There is one interface with two alternate settings.
-	   Alternate setting 0 is for bulk transfer.
-	   Alternate setting 1 is for isochronous transfer.
-	   We use bulk transfer (alternate setting 0). */
-	if (intf->num_altsetting < 1)
-		return -ENODEV;
-
-	/*
-	 * Anysee is always warm (its USB-bridge, Cypress FX2, uploads
-	 * firmware from eeprom).  If dvb_usb_device_init() succeeds that
-	 * means d is a valid pointer.
-	 */
-	ret = dvb_usb_device_init(intf, &anysee_properties, THIS_MODULE, &d,
-		adapter_nr);
-	if (ret)
-		return ret;
-
-	alt = usb_altnum_to_altsetting(intf, 0);
-	if (alt == NULL) {
-		deb_info("%s: no alt found!\n", __func__);
-		return -ENODEV;
-	}
-
-	ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber,
-		alt->desc.bAlternateSetting);
-	if (ret)
-		return ret;
-
-	return anysee_init(d);
-}
-
-static void anysee_disconnect(struct usb_interface *intf)
-{
-	struct dvb_usb_device *d = usb_get_intfdata(intf);
-
-	anysee_ci_release(d);
-	dvb_usb_device_exit(intf);
-
-	return;
-}
-
-static struct usb_device_id anysee_table[] = {
-	{ USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) },
-	{ USB_DEVICE(USB_VID_AMT,     USB_PID_ANYSEE) },
-	{ }		/* Terminating entry */
-};
-MODULE_DEVICE_TABLE(usb, anysee_table);
-
-static struct dvb_usb_device_properties anysee_properties = {
-	.caps             = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl         = DEVICE_SPECIFIC,
-
-	.size_of_priv     = sizeof(struct anysee_state),
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends    = 2,
-		.frontend_ctrl    = anysee_frontend_ctrl,
-		.fe = { {
-			.streaming_ctrl   = anysee_streaming_ctrl,
-			.frontend_attach  = anysee_frontend_attach,
-			.tuner_attach     = anysee_tuner_attach,
-			.stream = {
-				.type = USB_BULK,
-				.count = 8,
-				.endpoint = 0x82,
-				.u = {
-					.bulk = {
-						.buffersize = (16*512),
-					}
-				}
-			},
-		}, {
-			.streaming_ctrl   = anysee_streaming_ctrl,
-			.frontend_attach  = anysee_frontend_attach,
-			.tuner_attach     = anysee_tuner_attach,
-			.stream = {
-				.type = USB_BULK,
-				.count = 8,
-				.endpoint = 0x82,
-				.u = {
-					.bulk = {
-						.buffersize = (16*512),
-					}
-				}
-			},
-		} },
-		}
-	},
-
-	.rc.core = {
-		.rc_codes         = RC_MAP_ANYSEE,
-		.protocol         = RC_TYPE_OTHER,
-		.module_name      = "anysee",
-		.rc_query         = anysee_rc_query,
-		.rc_interval      = 250,  /* windows driver uses 500ms */
-	},
-
-	.i2c_algo         = &anysee_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 1,
-
-	.num_device_descs = 1,
-	.devices = {
-		{
-			.name = "Anysee DVB USB2.0",
-			.cold_ids = {NULL},
-			.warm_ids = {&anysee_table[0],
-				     &anysee_table[1], NULL},
-		},
-	}
-};
-
-static struct usb_driver anysee_driver = {
-	.name       = "dvb_usb_anysee",
-	.probe      = anysee_probe,
-	.disconnect = anysee_disconnect,
-	.id_table   = anysee_table,
-};
-
-module_usb_driver(anysee_driver);
-
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/anysee.h b/drivers/media/dvb/dvb-usb/anysee.h
deleted file mode 100644
index 8ac8794..0000000
--- a/drivers/media/dvb/dvb-usb/anysee.h
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
- *
- * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * TODO:
- * - add smart card reader support for Conditional Access (CA)
- *
- * Card reader in Anysee is nothing more than ISO 7816 card reader.
- * There is no hardware CAM in any Anysee device sold.
- * In my understanding it should be implemented by making own module
- * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This
- * module registers serial interface that can be used to communicate
- * with any ISO 7816 smart card.
- *
- * Any help according to implement serial smart card reader support
- * is highly welcome!
- */
-
-#ifndef _DVB_USB_ANYSEE_H_
-#define _DVB_USB_ANYSEE_H_
-
-#define DVB_USB_LOG_PREFIX "anysee"
-#include "dvb-usb.h"
-#include "dvb_ca_en50221.h"
-
-#define deb_info(args...) dprintk(dvb_usb_anysee_debug, 0x01, args)
-#define deb_xfer(args...) dprintk(dvb_usb_anysee_debug, 0x02, args)
-#define deb_rc(args...)   dprintk(dvb_usb_anysee_debug, 0x04, args)
-#define deb_reg(args...)  dprintk(dvb_usb_anysee_debug, 0x08, args)
-#define deb_i2c(args...)  dprintk(dvb_usb_anysee_debug, 0x10, args)
-#define deb_fw(args...)   dprintk(dvb_usb_anysee_debug, 0x20, args)
-
-enum cmd {
-	CMD_I2C_READ            = 0x33,
-	CMD_I2C_WRITE           = 0x31,
-	CMD_REG_READ            = 0xb0,
-	CMD_REG_WRITE           = 0xb1,
-	CMD_STREAMING_CTRL      = 0x12,
-	CMD_LED_AND_IR_CTRL     = 0x16,
-	CMD_GET_IR_CODE         = 0x41,
-	CMD_GET_HW_INFO         = 0x19,
-	CMD_SMARTCARD           = 0x34,
-	CMD_CI                  = 0x37,
-};
-
-struct anysee_state {
-	u8 hw; /* PCB ID */
-	u8 seq;
-	u8 fe_id:1; /* frondend ID */
-	u8 has_ci:1;
-	struct dvb_ca_en50221 ci;
-	unsigned long ci_cam_ready; /* jiffies */
-};
-
-#define ANYSEE_HW_507T    2 /* E30 */
-#define ANYSEE_HW_507CD   6 /* E30 Plus */
-#define ANYSEE_HW_507DC  10 /* E30 C Plus */
-#define ANYSEE_HW_507SI  11 /* E30 S2 Plus */
-#define ANYSEE_HW_507FA  15 /* E30 Combo Plus / E30 C Plus */
-#define ANYSEE_HW_508TC  18 /* E7 TC */
-#define ANYSEE_HW_508S2  19 /* E7 S2 */
-#define ANYSEE_HW_508T2C 20 /* E7 T2C */
-#define ANYSEE_HW_508PTC 21 /* E7 PTC Plus */
-#define ANYSEE_HW_508PS2 22 /* E7 PS2 Plus */
-
-#define REG_IOA       0x80 /* Port A (bit addressable) */
-#define REG_IOB       0x90 /* Port B (bit addressable) */
-#define REG_IOC       0xa0 /* Port C (bit addressable) */
-#define REG_IOD       0xb0 /* Port D (bit addressable) */
-#define REG_IOE       0xb1 /* Port E (NOT bit addressable) */
-#define REG_OEA       0xb2 /* Port A Output Enable */
-#define REG_OEB       0xb3 /* Port B Output Enable */
-#define REG_OEC       0xb4 /* Port C Output Enable */
-#define REG_OED       0xb5 /* Port D Output Enable */
-#define REG_OEE       0xb6 /* Port E Output Enable */
-
-#endif
-
-/***************************************************************************
- * USB API description (reverse engineered)
- ***************************************************************************
-
-Transaction flow:
-=================
-BULK[00001] >>> REQUEST PACKET 64 bytes
-BULK[00081] <<< REPLY PACKET #1 64 bytes (PREVIOUS TRANSACTION REPLY)
-BULK[00081] <<< REPLY PACKET #2 64 bytes (CURRENT TRANSACTION REPLY)
-
-General reply packet(s) are always used if not own reply defined.
-
-============================================================================
-| 00-63 | GENERAL REPLY PACKET #1 (PREVIOUS REPLY)
-============================================================================
-|    00 | reply data (if any) from previous transaction
-|       | Just same reply packet as returned during previous transaction.
-|       | Needed only if reply is missed in previous transaction.
-|       | Just skip normally.
-----------------------------------------------------------------------------
-| 01-59 | don't care
-----------------------------------------------------------------------------
-|    60 | packet sequence number
-----------------------------------------------------------------------------
-| 61-63 | don't care
-----------------------------------------------------------------------------
-
-============================================================================
-| 00-63 | GENERAL REPLY PACKET #2 (CURRENT REPLY)
-============================================================================
-|    00 | reply data (if any)
-----------------------------------------------------------------------------
-| 01-59 | don't care
-----------------------------------------------------------------------------
-|    60 | packet sequence number
-----------------------------------------------------------------------------
-| 61-63 | don't care
-----------------------------------------------------------------------------
-
-============================================================================
-| 00-63 | I2C WRITE REQUEST PACKET
-============================================================================
-|    00 | 0x31 I2C write command
-----------------------------------------------------------------------------
-|    01 | i2c address
-----------------------------------------------------------------------------
-|    02 | data length
-|       | 0x02 (for typical I2C reg / val pair)
-----------------------------------------------------------------------------
-|    03 | 0x01
-----------------------------------------------------------------------------
-| 04-   | data
-----------------------------------------------------------------------------
-|   -59 | don't care
-----------------------------------------------------------------------------
-|    60 | packet sequence number
-----------------------------------------------------------------------------
-| 61-63 | don't care
-----------------------------------------------------------------------------
-
-============================================================================
-| 00-63 | I2C READ REQUEST PACKET
-============================================================================
-|    00 | 0x33 I2C read command
-----------------------------------------------------------------------------
-|    01 | i2c address + 1
-----------------------------------------------------------------------------
-|    02 | register
-----------------------------------------------------------------------------
-|    03 | 0x00
-----------------------------------------------------------------------------
-|    04 | 0x00
-----------------------------------------------------------------------------
-|    05 | data length
-----------------------------------------------------------------------------
-| 06-59 | don't care
-----------------------------------------------------------------------------
-|    60 | packet sequence number
-----------------------------------------------------------------------------
-| 61-63 | don't care
-----------------------------------------------------------------------------
-
-============================================================================
-| 00-63 | USB CONTROLLER REGISTER WRITE REQUEST PACKET
-============================================================================
-|    00 | 0xb1 register write command
-----------------------------------------------------------------------------
-| 01-02 | register
-----------------------------------------------------------------------------
-|    03 | 0x01
-----------------------------------------------------------------------------
-|    04 | value
-----------------------------------------------------------------------------
-| 05-59 | don't care
-----------------------------------------------------------------------------
-|    60 | packet sequence number
-----------------------------------------------------------------------------
-| 61-63 | don't care
-----------------------------------------------------------------------------
-
-============================================================================
-| 00-63 | USB CONTROLLER REGISTER READ REQUEST PACKET
-============================================================================
-|    00 | 0xb0 register read command
-----------------------------------------------------------------------------
-| 01-02 | register
-----------------------------------------------------------------------------
-|    03 | 0x01
-----------------------------------------------------------------------------
-| 04-59 | don't care
-----------------------------------------------------------------------------
-|    60 | packet sequence number
-----------------------------------------------------------------------------
-| 61-63 | don't care
-----------------------------------------------------------------------------
-
-============================================================================
-| 00-63 | LED CONTROL REQUEST PACKET
-============================================================================
-|    00 | 0x16 LED and IR control command
-----------------------------------------------------------------------------
-|    01 | 0x01 (LED)
-----------------------------------------------------------------------------
-|    03 | 0x00 blink
-|       | 0x01 lights continuously
-----------------------------------------------------------------------------
-|    04 | blink interval
-|       | 0x00 fastest (looks like LED lights continuously)
-|       | 0xff slowest
-----------------------------------------------------------------------------
-| 05-59 | don't care
-----------------------------------------------------------------------------
-|    60 | packet sequence number
-----------------------------------------------------------------------------
-| 61-63 | don't care
-----------------------------------------------------------------------------
-
-============================================================================
-| 00-63 | IR CONTROL REQUEST PACKET
-============================================================================
-|    00 | 0x16 LED and IR control command
-----------------------------------------------------------------------------
-|    01 | 0x02 (IR)
-----------------------------------------------------------------------------
-|    03 | 0x00 IR disabled
-|       | 0x01 IR enabled
-----------------------------------------------------------------------------
-| 04-59 | don't care
-----------------------------------------------------------------------------
-|    60 | packet sequence number
-----------------------------------------------------------------------------
-| 61-63 | don't care
-----------------------------------------------------------------------------
-
-============================================================================
-| 00-63 | STREAMING CONTROL REQUEST PACKET
-============================================================================
-|    00 | 0x12 streaming control command
-----------------------------------------------------------------------------
-|    01 | 0x00 streaming disabled
-|       | 0x01 streaming enabled
-----------------------------------------------------------------------------
-|    02 | 0x00
-----------------------------------------------------------------------------
-| 03-59 | don't care
-----------------------------------------------------------------------------
-|    60 | packet sequence number
-----------------------------------------------------------------------------
-| 61-63 | don't care
-----------------------------------------------------------------------------
-
-============================================================================
-| 00-63 | REMOTE CONTROL REQUEST PACKET
-============================================================================
-|    00 | 0x41 remote control command
-----------------------------------------------------------------------------
-| 01-59 | don't care
-----------------------------------------------------------------------------
-|    60 | packet sequence number
-----------------------------------------------------------------------------
-| 61-63 | don't care
-----------------------------------------------------------------------------
-
-============================================================================
-| 00-63 | REMOTE CONTROL REPLY PACKET
-============================================================================
-|    00 | 0x00 code not received
-|       | 0x01 code received
-----------------------------------------------------------------------------
-|    01 | remote control code
-----------------------------------------------------------------------------
-| 02-59 | don't care
-----------------------------------------------------------------------------
-|    60 | packet sequence number
-----------------------------------------------------------------------------
-| 61-63 | don't care
-----------------------------------------------------------------------------
-
-============================================================================
-| 00-63 | GET HARDWARE INFO REQUEST PACKET
-============================================================================
-|    00 | 0x19 get hardware info command
-----------------------------------------------------------------------------
-| 01-59 | don't care
-----------------------------------------------------------------------------
-|    60 | packet sequence number
-----------------------------------------------------------------------------
-| 61-63 | don't care
-----------------------------------------------------------------------------
-
-============================================================================
-| 00-63 | GET HARDWARE INFO REPLY PACKET
-============================================================================
-|    00 | hardware id
-----------------------------------------------------------------------------
-| 01-02 | firmware version
-----------------------------------------------------------------------------
-| 03-59 | don't care
-----------------------------------------------------------------------------
-|    60 | packet sequence number
-----------------------------------------------------------------------------
-| 61-63 | don't care
-----------------------------------------------------------------------------
-
-============================================================================
-| 00-63 | SMART CARD READER PACKET
-============================================================================
-|    00 | 0x34 smart card reader command
-----------------------------------------------------------------------------
-|    xx |
-----------------------------------------------------------------------------
-| xx-59 | don't care
-----------------------------------------------------------------------------
-|    60 | packet sequence number
-----------------------------------------------------------------------------
-| 61-63 | don't care
-----------------------------------------------------------------------------
-
-*/
diff --git a/drivers/media/dvb/dvb-usb/au6610.c b/drivers/media/dvb/dvb-usb/au6610.c
deleted file mode 100644
index 16210c0..0000000
--- a/drivers/media/dvb/dvb-usb/au6610.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * DVB USB Linux driver for Alcor Micro AU6610 DVB-T USB2.0.
- *
- * Copyright (C) 2006 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "au6610.h"
-#include "zl10353.h"
-#include "qt1010.h"
-
-/* debug */
-static int dvb_usb_au6610_debug;
-module_param_named(debug, dvb_usb_au6610_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr,
-			  u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
-{
-	int ret;
-	u16 index;
-	u8 *usb_buf;
-
-	/*
-	 * allocate enough for all known requests,
-	 * read returns 5 and write 6 bytes
-	 */
-	usb_buf = kmalloc(6, GFP_KERNEL);
-	if (!usb_buf)
-		return -ENOMEM;
-
-	switch (wlen) {
-	case 1:
-		index = wbuf[0] << 8;
-		break;
-	case 2:
-		index = wbuf[0] << 8;
-		index += wbuf[1];
-		break;
-	default:
-		warn("wlen = %x, aborting.", wlen);
-		ret = -EINVAL;
-		goto error;
-	}
-
-	ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), operation,
-			      USB_TYPE_VENDOR|USB_DIR_IN, addr << 1, index,
-			      usb_buf, 6, AU6610_USB_TIMEOUT);
-	if (ret < 0)
-		goto error;
-
-	switch (operation) {
-	case AU6610_REQ_I2C_READ:
-	case AU6610_REQ_USB_READ:
-		/* requested value is always 5th byte in buffer */
-		rbuf[0] = usb_buf[4];
-	}
-error:
-	kfree(usb_buf);
-	return ret;
-}
-
-static int au6610_i2c_msg(struct dvb_usb_device *d, u8 addr,
-			  u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
-{
-	u8 request;
-	u8 wo = (rbuf == NULL || rlen == 0); /* write-only */
-
-	if (wo) {
-		request = AU6610_REQ_I2C_WRITE;
-	} else { /* rw */
-		request = AU6610_REQ_I2C_READ;
-	}
-
-	return au6610_usb_msg(d, request, addr, wbuf, wlen, rbuf, rlen);
-}
-
-
-/* I2C */
-static int au6610_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
-			   int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	int i;
-
-	if (num > 2)
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	for (i = 0; i < num; i++) {
-		/* write/read request */
-		if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
-			if (au6610_i2c_msg(d, msg[i].addr, msg[i].buf,
-					   msg[i].len, msg[i+1].buf,
-					   msg[i+1].len) < 0)
-				break;
-			i++;
-		} else if (au6610_i2c_msg(d, msg[i].addr, msg[i].buf,
-					       msg[i].len, NULL, 0) < 0)
-				break;
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-	return i;
-}
-
-
-static u32 au6610_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm au6610_i2c_algo = {
-	.master_xfer   = au6610_i2c_xfer,
-	.functionality = au6610_i2c_func,
-};
-
-/* Callbacks for DVB USB */
-static struct zl10353_config au6610_zl10353_config = {
-	.demod_address = 0x0f,
-	.no_tuner = 1,
-	.parallel_ts = 1,
-};
-
-static int au6610_zl10353_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	adap->fe_adap[0].fe = dvb_attach(zl10353_attach, &au6610_zl10353_config,
-		&adap->dev->i2c_adap);
-	if (adap->fe_adap[0].fe == NULL)
-		return -ENODEV;
-
-	return 0;
-}
-
-static struct qt1010_config au6610_qt1010_config = {
-	.i2c_address = 0x62
-};
-
-static int au6610_qt1010_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	return dvb_attach(qt1010_attach,
-			  adap->fe_adap[0].fe, &adap->dev->i2c_adap,
-			  &au6610_qt1010_config) == NULL ? -ENODEV : 0;
-}
-
-/* DVB USB Driver stuff */
-static struct dvb_usb_device_properties au6610_properties;
-
-static int au6610_probe(struct usb_interface *intf,
-			const struct usb_device_id *id)
-{
-	struct dvb_usb_device *d;
-	struct usb_host_interface *alt;
-	int ret;
-
-	if (intf->num_altsetting < AU6610_ALTSETTING_COUNT)
-		return -ENODEV;
-
-	ret = dvb_usb_device_init(intf, &au6610_properties, THIS_MODULE, &d,
-				  adapter_nr);
-	if (ret == 0) {
-		alt = usb_altnum_to_altsetting(intf, AU6610_ALTSETTING);
-
-		if (alt == NULL) {
-			deb_info("%s: no alt found!\n", __func__);
-			return -ENODEV;
-		}
-		ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber,
-					alt->desc.bAlternateSetting);
-	}
-
-	return ret;
-}
-
-static struct usb_device_id au6610_table [] = {
-	{ USB_DEVICE(USB_VID_ALCOR_MICRO, USB_PID_SIGMATEK_DVB_110) },
-	{ }		/* Terminating entry */
-};
-MODULE_DEVICE_TABLE(usb, au6610_table);
-
-static struct dvb_usb_device_properties au6610_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = DEVICE_SPECIFIC,
-
-	.size_of_priv = 0,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.frontend_attach  = au6610_zl10353_frontend_attach,
-			.tuner_attach     = au6610_qt1010_tuner_attach,
-
-			.stream = {
-				.type = USB_ISOC,
-				.count = 5,
-				.endpoint = 0x82,
-				.u = {
-					.isoc = {
-						.framesperurb = 40,
-						.framesize = 942,
-						.interval = 1,
-					}
-				}
-			},
-		}},
-		}
-	},
-
-	.i2c_algo = &au6610_i2c_algo,
-
-	.num_device_descs = 1,
-	.devices = {
-		{
-			.name = "Sigmatek DVB-110 DVB-T USB2.0",
-			.cold_ids = {NULL},
-			.warm_ids = {&au6610_table[0], NULL},
-		},
-	}
-};
-
-static struct usb_driver au6610_driver = {
-	.name       = "dvb_usb_au6610",
-	.probe      = au6610_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table   = au6610_table,
-};
-
-module_usb_driver(au6610_driver);
-
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_DESCRIPTION("Driver for Alcor Micro AU6610 DVB-T USB2.0");
-MODULE_VERSION("0.1");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/au6610.h b/drivers/media/dvb/dvb-usb/au6610.h
deleted file mode 100644
index 7849abe..0000000
--- a/drivers/media/dvb/dvb-usb/au6610.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * DVB USB Linux driver for Alcor Micro AU6610 DVB-T USB2.0.
- *
- * Copyright (C) 2006 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _DVB_USB_AU6610_H_
-#define _DVB_USB_AU6610_H_
-
-#define DVB_USB_LOG_PREFIX "au6610"
-#include "dvb-usb.h"
-
-#define deb_info(args...)   dprintk(dvb_usb_au6610_debug, 0x01, args)
-
-#define AU6610_REQ_I2C_WRITE	0x14
-#define AU6610_REQ_I2C_READ	0x13
-#define AU6610_REQ_USB_WRITE	0x16
-#define AU6610_REQ_USB_READ	0x15
-
-#define AU6610_USB_TIMEOUT 1000
-
-#define AU6610_ALTSETTING_COUNT 6
-#define AU6610_ALTSETTING       5
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/az6007.c b/drivers/media/dvb/dvb-usb/az6007.c
deleted file mode 100644
index 86861e6..0000000
--- a/drivers/media/dvb/dvb-usb/az6007.c
+++ /dev/null
@@ -1,955 +0,0 @@
-/*
- * Driver for AzureWave 6007 DVB-C/T USB2.0 and clones
- *
- * Copyright (c) Henry Wang <Henry.wang@AzureWave.com>
- *
- * This driver was made publicly available by Terratec, at:
- *	http://linux.terratec.de/files/TERRATEC_H7/20110323_TERRATEC_H7_Linux.tar.gz
- * The original driver's license is GPL, as declared with MODULE_LICENSE()
- *
- * Copyright (c) 2010-2011 Mauro Carvalho Chehab <mchehab@redhat.com>
- *	Driver modified by in order to work with upstream drxk driver, and
- *	tons of bugs got fixed.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation under version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "drxk.h"
-#include "mt2063.h"
-#include "dvb_ca_en50221.h"
-
-#define DVB_USB_LOG_PREFIX "az6007"
-#include "dvb-usb.h"
-
-/* debug */
-int dvb_usb_az6007_debug;
-module_param_named(debug, dvb_usb_az6007_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))."
-		 DVB_USB_DEBUG_STATUS);
-
-#define deb_info(args...) dprintk(dvb_usb_az6007_debug, 0x01, args)
-#define deb_xfer(args...) dprintk(dvb_usb_az6007_debug, 0x02, args)
-#define deb_rc(args...)   dprintk(dvb_usb_az6007_debug, 0x04, args)
-#define deb_fe(args...)   dprintk(dvb_usb_az6007_debug, 0x08, args)
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-/* Known requests (Cypress FX2 firmware + az6007 "private" ones*/
-
-#define FX2_OED			0xb5
-#define AZ6007_READ_DATA	0xb7
-#define AZ6007_I2C_RD		0xb9
-#define AZ6007_POWER		0xbc
-#define AZ6007_I2C_WR		0xbd
-#define FX2_SCON1		0xc0
-#define AZ6007_TS_THROUGH	0xc7
-#define AZ6007_READ_IR		0xb4
-
-struct az6007_device_state {
-	struct mutex		mutex;
-	struct mutex		ca_mutex;
-	struct dvb_ca_en50221	ca;
-	unsigned		warm:1;
-	int			(*gate_ctrl) (struct dvb_frontend *, int);
-	unsigned char		data[4096];
-};
-
-static struct drxk_config terratec_h7_drxk = {
-	.adr = 0x29,
-	.parallel_ts = true,
-	.dynamic_clk = true,
-	.single_master = true,
-	.enable_merr_cfg = true,
-	.no_i2c_bridge = false,
-	.chunk_size = 64,
-	.mpeg_out_clk_strength = 0x02,
-	.microcode_name = "dvb-usb-terratec-h7-drxk.fw",
-};
-
-static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct dvb_usb_adapter *adap = fe->sec_priv;
-	struct az6007_device_state *st;
-	int status = 0;
-
-	deb_info("%s: %s\n", __func__, enable ? "enable" : "disable");
-
-	if (!adap)
-		return -EINVAL;
-
-	st = adap->dev->priv;
-
-	if (!st)
-		return -EINVAL;
-
-	if (enable)
-		status = st->gate_ctrl(fe, 1);
-	else
-		status = st->gate_ctrl(fe, 0);
-
-	return status;
-}
-
-static struct mt2063_config az6007_mt2063_config = {
-	.tuner_address = 0x60,
-	.refclock = 36125000,
-};
-
-static int __az6007_read(struct usb_device *udev, u8 req, u16 value,
-			    u16 index, u8 *b, int blen)
-{
-	int ret;
-
-	ret = usb_control_msg(udev,
-			      usb_rcvctrlpipe(udev, 0),
-			      req,
-			      USB_TYPE_VENDOR | USB_DIR_IN,
-			      value, index, b, blen, 5000);
-	if (ret < 0) {
-		warn("usb read operation failed. (%d)", ret);
-		return -EIO;
-	}
-
-	deb_xfer("in: req. %02x, val: %04x, ind: %04x, buffer: ", req, value,
-		 index);
-	debug_dump(b, blen, deb_xfer);
-
-	return ret;
-}
-
-static int az6007_read(struct dvb_usb_device *d, u8 req, u16 value,
-			    u16 index, u8 *b, int blen)
-{
-	struct az6007_device_state *st = d->priv;
-	int ret;
-
-	if (mutex_lock_interruptible(&st->mutex) < 0)
-		return -EAGAIN;
-
-	ret = __az6007_read(d->udev, req, value, index, b, blen);
-
-	mutex_unlock(&st->mutex);
-
-	return ret;
-}
-
-static int __az6007_write(struct usb_device *udev, u8 req, u16 value,
-			     u16 index, u8 *b, int blen)
-{
-	int ret;
-
-	deb_xfer("out: req. %02x, val: %04x, ind: %04x, buffer: ", req, value,
-		 index);
-	debug_dump(b, blen, deb_xfer);
-
-	if (blen > 64) {
-		err("az6007: tried to write %d bytes, but I2C max size is 64 bytes\n",
-		    blen);
-		return -EOPNOTSUPP;
-	}
-
-	ret = usb_control_msg(udev,
-			      usb_sndctrlpipe(udev, 0),
-			      req,
-			      USB_TYPE_VENDOR | USB_DIR_OUT,
-			      value, index, b, blen, 5000);
-	if (ret != blen) {
-		err("usb write operation failed. (%d)", ret);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static int az6007_write(struct dvb_usb_device *d, u8 req, u16 value,
-			    u16 index, u8 *b, int blen)
-{
-	struct az6007_device_state *st = d->priv;
-	int ret;
-
-	if (mutex_lock_interruptible(&st->mutex) < 0)
-		return -EAGAIN;
-
-	ret = __az6007_write(d->udev, req, value, index, b, blen);
-
-	mutex_unlock(&st->mutex);
-
-	return ret;
-}
-
-static int az6007_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	struct dvb_usb_device *d = adap->dev;
-
-	deb_info("%s: %s", __func__, onoff ? "enable" : "disable");
-
-	return az6007_write(d, 0xbc, onoff, 0, NULL, 0);
-}
-
-/* remote control stuff (does not work with my box) */
-static int az6007_rc_query(struct dvb_usb_device *d)
-{
-	struct az6007_device_state *st = d->priv;
-	unsigned code = 0;
-
-	az6007_read(d, AZ6007_READ_IR, 0, 0, st->data, 10);
-
-	if (st->data[1] == 0x44)
-		return 0;
-
-	if ((st->data[1] ^ st->data[2]) == 0xff)
-		code = st->data[1];
-	else
-		code = st->data[1] << 8 | st->data[2];
-
-	if ((st->data[3] ^ st->data[4]) == 0xff)
-		code = code << 8 | st->data[3];
-	else
-		code = code << 16 | st->data[3] << 8 | st->data[4];
-
-	rc_keydown(d->rc_dev, code, st->data[5]);
-
-	return 0;
-}
-
-static int az6007_ci_read_attribute_mem(struct dvb_ca_en50221 *ca,
-					int slot,
-					int address)
-{
-	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
-	struct az6007_device_state *state = (struct az6007_device_state *)d->priv;
-
-	int ret;
-	u8 req;
-	u16 value;
-	u16 index;
-	int blen;
-	u8 *b;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	b = kmalloc(12, GFP_KERNEL);
-	if (!b)
-		return -ENOMEM;
-
-	mutex_lock(&state->ca_mutex);
-
-	req = 0xC1;
-	value = address;
-	index = 0;
-	blen = 1;
-
-	ret = az6007_read(d, req, value, index, b, blen);
-	if (ret < 0) {
-		warn("usb in operation failed. (%d)", ret);
-		ret = -EINVAL;
-	} else {
-		ret = b[0];
-	}
-
-	mutex_unlock(&state->ca_mutex);
-	kfree(b);
-	return ret;
-}
-
-static int az6007_ci_write_attribute_mem(struct dvb_ca_en50221 *ca,
-					 int slot,
-					 int address,
-					 u8 value)
-{
-	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
-	struct az6007_device_state *state = (struct az6007_device_state *)d->priv;
-
-	int ret;
-	u8 req;
-	u16 value1;
-	u16 index;
-	int blen;
-
-	deb_info("%s %d", __func__, slot);
-	if (slot != 0)
-		return -EINVAL;
-
-	mutex_lock(&state->ca_mutex);
-	req = 0xC2;
-	value1 = address;
-	index = value;
-	blen = 0;
-
-	ret = az6007_write(d, req, value1, index, NULL, blen);
-	if (ret != 0)
-		warn("usb out operation failed. (%d)", ret);
-
-	mutex_unlock(&state->ca_mutex);
-	return ret;
-}
-
-static int az6007_ci_read_cam_control(struct dvb_ca_en50221 *ca,
-				      int slot,
-				      u8 address)
-{
-	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
-	struct az6007_device_state *state = (struct az6007_device_state *)d->priv;
-
-	int ret;
-	u8 req;
-	u16 value;
-	u16 index;
-	int blen;
-	u8 *b;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	b = kmalloc(12, GFP_KERNEL);
-	if (!b)
-		return -ENOMEM;
-
-	mutex_lock(&state->ca_mutex);
-
-	req = 0xC3;
-	value = address;
-	index = 0;
-	blen = 2;
-
-	ret = az6007_read(d, req, value, index, b, blen);
-	if (ret < 0) {
-		warn("usb in operation failed. (%d)", ret);
-		ret = -EINVAL;
-	} else {
-		if (b[0] == 0)
-			warn("Read CI IO error");
-
-		ret = b[1];
-		deb_info("read cam data = %x from 0x%x", b[1], value);
-	}
-
-	mutex_unlock(&state->ca_mutex);
-	kfree(b);
-	return ret;
-}
-
-static int az6007_ci_write_cam_control(struct dvb_ca_en50221 *ca,
-				       int slot,
-				       u8 address,
-				       u8 value)
-{
-	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
-	struct az6007_device_state *state = (struct az6007_device_state *)d->priv;
-
-	int ret;
-	u8 req;
-	u16 value1;
-	u16 index;
-	int blen;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	mutex_lock(&state->ca_mutex);
-	req = 0xC4;
-	value1 = address;
-	index = value;
-	blen = 0;
-
-	ret = az6007_write(d, req, value1, index, NULL, blen);
-	if (ret != 0) {
-		warn("usb out operation failed. (%d)", ret);
-		goto failed;
-	}
-
-failed:
-	mutex_unlock(&state->ca_mutex);
-	return ret;
-}
-
-static int CI_CamReady(struct dvb_ca_en50221 *ca, int slot)
-{
-	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
-
-	int ret;
-	u8 req;
-	u16 value;
-	u16 index;
-	int blen;
-	u8 *b;
-
-	b = kmalloc(12, GFP_KERNEL);
-	if (!b)
-		return -ENOMEM;
-
-	req = 0xC8;
-	value = 0;
-	index = 0;
-	blen = 1;
-
-	ret = az6007_read(d, req, value, index, b, blen);
-	if (ret < 0) {
-		warn("usb in operation failed. (%d)", ret);
-		ret = -EIO;
-	} else{
-		ret = b[0];
-	}
-	kfree(b);
-	return ret;
-}
-
-static int az6007_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot)
-{
-	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
-	struct az6007_device_state *state = (struct az6007_device_state *)d->priv;
-
-	int ret, i;
-	u8 req;
-	u16 value;
-	u16 index;
-	int blen;
-
-	mutex_lock(&state->ca_mutex);
-
-	req = 0xC6;
-	value = 1;
-	index = 0;
-	blen = 0;
-
-	ret = az6007_write(d, req, value, index, NULL, blen);
-	if (ret != 0) {
-		warn("usb out operation failed. (%d)", ret);
-		goto failed;
-	}
-
-	msleep(500);
-	req = 0xC6;
-	value = 0;
-	index = 0;
-	blen = 0;
-
-	ret = az6007_write(d, req, value, index, NULL, blen);
-	if (ret != 0) {
-		warn("usb out operation failed. (%d)", ret);
-		goto failed;
-	}
-
-	for (i = 0; i < 15; i++) {
-		msleep(100);
-
-		if (CI_CamReady(ca, slot)) {
-			deb_info("CAM Ready");
-			break;
-		}
-	}
-	msleep(5000);
-
-failed:
-	mutex_unlock(&state->ca_mutex);
-	return ret;
-}
-
-static int az6007_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
-{
-	return 0;
-}
-
-static int az6007_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
-{
-	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
-	struct az6007_device_state *state = (struct az6007_device_state *)d->priv;
-
-	int ret;
-	u8 req;
-	u16 value;
-	u16 index;
-	int blen;
-
-	deb_info("%s", __func__);
-	mutex_lock(&state->ca_mutex);
-	req = 0xC7;
-	value = 1;
-	index = 0;
-	blen = 0;
-
-	ret = az6007_write(d, req, value, index, NULL, blen);
-	if (ret != 0) {
-		warn("usb out operation failed. (%d)", ret);
-		goto failed;
-	}
-
-failed:
-	mutex_unlock(&state->ca_mutex);
-	return ret;
-}
-
-static int az6007_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
-{
-	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
-	struct az6007_device_state *state = (struct az6007_device_state *)d->priv;
-	int ret;
-	u8 req;
-	u16 value;
-	u16 index;
-	int blen;
-	u8 *b;
-
-	b = kmalloc(12, GFP_KERNEL);
-	if (!b)
-		return -ENOMEM;
-	mutex_lock(&state->ca_mutex);
-
-	req = 0xC5;
-	value = 0;
-	index = 0;
-	blen = 1;
-
-	ret = az6007_read(d, req, value, index, b, blen);
-	if (ret < 0) {
-		warn("usb in operation failed. (%d)", ret);
-		ret = -EIO;
-	} else
-		ret = 0;
-
-	if (!ret && b[0] == 1) {
-		ret = DVB_CA_EN50221_POLL_CAM_PRESENT |
-		      DVB_CA_EN50221_POLL_CAM_READY;
-	}
-
-	mutex_unlock(&state->ca_mutex);
-	kfree(b);
-	return ret;
-}
-
-
-static void az6007_ci_uninit(struct dvb_usb_device *d)
-{
-	struct az6007_device_state *state;
-
-	deb_info("%s", __func__);
-
-	if (NULL == d)
-		return;
-
-	state = (struct az6007_device_state *)d->priv;
-	if (NULL == state)
-		return;
-
-	if (NULL == state->ca.data)
-		return;
-
-	dvb_ca_en50221_release(&state->ca);
-
-	memset(&state->ca, 0, sizeof(state->ca));
-}
-
-
-static int az6007_ci_init(struct dvb_usb_adapter *a)
-{
-	struct dvb_usb_device *d = a->dev;
-	struct az6007_device_state *state = (struct az6007_device_state *)d->priv;
-	int ret;
-
-	deb_info("%s", __func__);
-
-	mutex_init(&state->ca_mutex);
-
-	state->ca.owner			= THIS_MODULE;
-	state->ca.read_attribute_mem	= az6007_ci_read_attribute_mem;
-	state->ca.write_attribute_mem	= az6007_ci_write_attribute_mem;
-	state->ca.read_cam_control	= az6007_ci_read_cam_control;
-	state->ca.write_cam_control	= az6007_ci_write_cam_control;
-	state->ca.slot_reset		= az6007_ci_slot_reset;
-	state->ca.slot_shutdown		= az6007_ci_slot_shutdown;
-	state->ca.slot_ts_enable	= az6007_ci_slot_ts_enable;
-	state->ca.poll_slot_status	= az6007_ci_poll_slot_status;
-	state->ca.data			= d;
-
-	ret = dvb_ca_en50221_init(&a->dvb_adap,
-				  &state->ca,
-				  0, /* flags */
-				  1);/* n_slots */
-	if (ret != 0) {
-		err("Cannot initialize CI: Error %d.", ret);
-		memset(&state->ca, 0, sizeof(state->ca));
-		return ret;
-	}
-
-	deb_info("CI initialized.");
-
-	return 0;
-}
-
-static int az6007_read_mac_addr(struct dvb_usb_device *d, u8 mac[6])
-{
-	struct az6007_device_state *st = d->priv;
-	int ret;
-
-	ret = az6007_read(d, AZ6007_READ_DATA, 6, 0, st->data, 6);
-	memcpy(mac, st->data, 6);
-
-	if (ret > 0)
-		deb_info("%s: mac is %pM\n", __func__, mac);
-
-	return ret;
-}
-
-static int az6007_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct az6007_device_state *st = adap->dev->priv;
-
-	deb_info("attaching demod drxk");
-
-	adap->fe_adap[0].fe = dvb_attach(drxk_attach, &terratec_h7_drxk,
-					 &adap->dev->i2c_adap);
-	if (!adap->fe_adap[0].fe)
-		return -EINVAL;
-
-	adap->fe_adap[0].fe->sec_priv = adap;
-	st->gate_ctrl = adap->fe_adap[0].fe->ops.i2c_gate_ctrl;
-	adap->fe_adap[0].fe->ops.i2c_gate_ctrl = drxk_gate_ctrl;
-
-	az6007_ci_init(adap);
-
-	return 0;
-}
-
-static int az6007_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	deb_info("attaching tuner mt2063");
-
-	/* Attach mt2063 to DVB-C frontend */
-	if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl)
-		adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 1);
-	if (!dvb_attach(mt2063_attach, adap->fe_adap[0].fe,
-			&az6007_mt2063_config,
-			&adap->dev->i2c_adap))
-		return -EINVAL;
-
-	if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl)
-		adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 0);
-
-	return 0;
-}
-
-int az6007_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	struct az6007_device_state *st = d->priv;
-	int ret;
-
-	deb_info("%s()\n", __func__);
-
-	if (!st->warm) {
-		mutex_init(&st->mutex);
-
-		ret = az6007_write(d, AZ6007_POWER, 0, 2, NULL, 0);
-		if (ret < 0)
-			return ret;
-		msleep(60);
-		ret = az6007_write(d, AZ6007_POWER, 1, 4, NULL, 0);
-		if (ret < 0)
-			return ret;
-		msleep(100);
-		ret = az6007_write(d, AZ6007_POWER, 1, 3, NULL, 0);
-		if (ret < 0)
-			return ret;
-		msleep(20);
-		ret = az6007_write(d, AZ6007_POWER, 1, 4, NULL, 0);
-		if (ret < 0)
-			return ret;
-
-		msleep(400);
-		ret = az6007_write(d, FX2_SCON1, 0, 3, NULL, 0);
-		if (ret < 0)
-			return ret;
-		msleep(150);
-		ret = az6007_write(d, FX2_SCON1, 1, 3, NULL, 0);
-		if (ret < 0)
-			return ret;
-		msleep(430);
-		ret = az6007_write(d, AZ6007_POWER, 0, 0, NULL, 0);
-		if (ret < 0)
-			return ret;
-
-		st->warm = true;
-
-		return 0;
-	}
-
-	if (!onoff)
-		return 0;
-
-	az6007_write(d, AZ6007_POWER, 0, 0, NULL, 0);
-	az6007_write(d, AZ6007_TS_THROUGH, 0, 0, NULL, 0);
-
-	return 0;
-}
-
-/* I2C */
-static int az6007_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
-			   int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	struct az6007_device_state *st = d->priv;
-	int i, j, len;
-	int ret = 0;
-	u16 index;
-	u16 value;
-	int length;
-	u8 req, addr;
-
-	if (mutex_lock_interruptible(&st->mutex) < 0)
-		return -EAGAIN;
-
-	for (i = 0; i < num; i++) {
-		addr = msgs[i].addr << 1;
-		if (((i + 1) < num)
-		    && (msgs[i].len == 1)
-		    && (!msgs[i].flags & I2C_M_RD)
-		    && (msgs[i + 1].flags & I2C_M_RD)
-		    && (msgs[i].addr == msgs[i + 1].addr)) {
-			/*
-			 * A write + read xfer for the same address, where
-			 * the first xfer has just 1 byte length.
-			 * Need to join both into one operation
-			 */
-			if (dvb_usb_az6007_debug & 2)
-				printk(KERN_DEBUG
-				       "az6007 I2C xfer write+read addr=0x%x len=%d/%d: ",
-				       addr, msgs[i].len, msgs[i + 1].len);
-			req = AZ6007_I2C_RD;
-			index = msgs[i].buf[0];
-			value = addr | (1 << 8);
-			length = 6 + msgs[i + 1].len;
-			len = msgs[i + 1].len;
-			ret = __az6007_read(d->udev, req, value, index,
-					    st->data, length);
-			if (ret >= len) {
-				for (j = 0; j < len; j++) {
-					msgs[i + 1].buf[j] = st->data[j + 5];
-					if (dvb_usb_az6007_debug & 2)
-						printk(KERN_CONT
-						       "0x%02x ",
-						       msgs[i + 1].buf[j]);
-				}
-			} else
-				ret = -EIO;
-			i++;
-		} else if (!(msgs[i].flags & I2C_M_RD)) {
-			/* write bytes */
-			if (dvb_usb_az6007_debug & 2)
-				printk(KERN_DEBUG
-				       "az6007 I2C xfer write addr=0x%x len=%d: ",
-				       addr, msgs[i].len);
-			req = AZ6007_I2C_WR;
-			index = msgs[i].buf[0];
-			value = addr | (1 << 8);
-			length = msgs[i].len - 1;
-			len = msgs[i].len - 1;
-			if (dvb_usb_az6007_debug & 2)
-				printk(KERN_CONT "(0x%02x) ", msgs[i].buf[0]);
-			for (j = 0; j < len; j++) {
-				st->data[j] = msgs[i].buf[j + 1];
-				if (dvb_usb_az6007_debug & 2)
-					printk(KERN_CONT "0x%02x ",
-					       st->data[j]);
-			}
-			ret =  __az6007_write(d->udev, req, value, index,
-					      st->data, length);
-		} else {
-			/* read bytes */
-			if (dvb_usb_az6007_debug & 2)
-				printk(KERN_DEBUG
-				       "az6007 I2C xfer read addr=0x%x len=%d: ",
-				       addr, msgs[i].len);
-			req = AZ6007_I2C_RD;
-			index = msgs[i].buf[0];
-			value = addr;
-			length = msgs[i].len + 6;
-			len = msgs[i].len;
-			ret = __az6007_read(d->udev, req, value, index,
-					    st->data, length);
-			for (j = 0; j < len; j++) {
-				msgs[i].buf[j] = st->data[j + 5];
-				if (dvb_usb_az6007_debug & 2)
-					printk(KERN_CONT
-					       "0x%02x ", st->data[j + 5]);
-			}
-		}
-		if (dvb_usb_az6007_debug & 2)
-			printk(KERN_CONT "\n");
-		if (ret < 0)
-			goto err;
-	}
-err:
-	mutex_unlock(&st->mutex);
-
-	if (ret < 0) {
-		info("%s ERROR: %i", __func__, ret);
-		return ret;
-	}
-	return num;
-}
-
-static u32 az6007_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm az6007_i2c_algo = {
-	.master_xfer = az6007_i2c_xfer,
-	.functionality = az6007_i2c_func,
-};
-
-int az6007_identify_state(struct usb_device *udev,
-			  struct dvb_usb_device_properties *props,
-			  struct dvb_usb_device_description **desc, int *cold)
-{
-	int ret;
-	u8 *mac;
-
-	mac = kmalloc(6, GFP_ATOMIC);
-	if (!mac)
-		return -ENOMEM;
-
-	/* Try to read the mac address */
-	ret = __az6007_read(udev, AZ6007_READ_DATA, 6, 0, mac, 6);
-	if (ret == 6)
-		*cold = 0;
-	else
-		*cold = 1;
-
-	kfree(mac);
-
-	if (*cold) {
-		__az6007_write(udev, 0x09, 1, 0, NULL, 0);
-		__az6007_write(udev, 0x00, 0, 0, NULL, 0);
-		__az6007_write(udev, 0x00, 0, 0, NULL, 0);
-	}
-
-	deb_info("Device is on %s state\n", *cold ? "warm" : "cold");
-	return 0;
-}
-
-static struct dvb_usb_device_properties az6007_properties;
-
-static void az6007_usb_disconnect(struct usb_interface *intf)
-{
-	struct dvb_usb_device *d = usb_get_intfdata(intf);
-	az6007_ci_uninit(d);
-	dvb_usb_device_exit(intf);
-}
-
-static int az6007_usb_probe(struct usb_interface *intf,
-			    const struct usb_device_id *id)
-{
-	return dvb_usb_device_init(intf, &az6007_properties,
-				   THIS_MODULE, NULL, adapter_nr);
-}
-
-static struct usb_device_id az6007_usb_table[] = {
-	{USB_DEVICE(USB_VID_AZUREWAVE, USB_PID_AZUREWAVE_6007)},
-	{USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_H7)},
-	{USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_H7_2)},
-	{0},
-};
-
-MODULE_DEVICE_TABLE(usb, az6007_usb_table);
-
-static struct dvb_usb_device_properties az6007_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-	.usb_ctrl = CYPRESS_FX2,
-	.firmware            = "dvb-usb-terratec-h7-az6007.fw",
-	.no_reconnect        = 1,
-	.size_of_priv        = sizeof(struct az6007_device_state),
-	.identify_state	     = az6007_identify_state,
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = az6007_streaming_ctrl,
-			.tuner_attach     = az6007_tuner_attach,
-			.frontend_attach  = az6007_frontend_attach,
-
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 10,
-				.endpoint = 0x02,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			},
-		} }
-	} },
-	.power_ctrl       = az6007_power_ctrl,
-	.read_mac_address = az6007_read_mac_addr,
-
-	.rc.core = {
-		.rc_interval      = 400,
-		.rc_codes         = RC_MAP_NEC_TERRATEC_CINERGY_XS,
-		.module_name	  = "az6007",
-		.rc_query         = az6007_rc_query,
-		.allowed_protos   = RC_TYPE_NEC,
-	},
-	.i2c_algo         = &az6007_i2c_algo,
-
-	.num_device_descs = 2,
-	.devices = {
-		{ .name = "AzureWave DTV StarBox DVB-T/C USB2.0 (az6007)",
-		  .cold_ids = { &az6007_usb_table[0], NULL },
-		  .warm_ids = { NULL },
-		},
-		{ .name = "TerraTec DTV StarBox DVB-T/C USB2.0 (az6007)",
-		  .cold_ids = { &az6007_usb_table[1], &az6007_usb_table[2], NULL },
-		  .warm_ids = { NULL },
-		},
-		{ NULL },
-	}
-};
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver az6007_usb_driver = {
-	.name		= "dvb_usb_az6007",
-	.probe		= az6007_usb_probe,
-	.disconnect	= az6007_usb_disconnect,
-	.id_table	= az6007_usb_table,
-};
-
-/* module stuff */
-static int __init az6007_usb_module_init(void)
-{
-	int result;
-	deb_info("az6007 usb module init\n");
-
-	result = usb_register(&az6007_usb_driver);
-	if (result) {
-		err("usb_register failed. (%d)", result);
-		return result;
-	}
-
-	return 0;
-}
-
-static void __exit az6007_usb_module_exit(void)
-{
-	/* deregister this driver from the USB subsystem */
-	deb_info("az6007 usb module exit\n");
-	usb_deregister(&az6007_usb_driver);
-}
-
-module_init(az6007_usb_module_init);
-module_exit(az6007_usb_module_exit);
-
-MODULE_AUTHOR("Henry Wang <Henry.wang@AzureWave.com>");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
-MODULE_DESCRIPTION("Driver for AzureWave 6007 DVB-C/T USB2.0 and clones");
-MODULE_VERSION("1.1");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/az6027.c b/drivers/media/dvb/dvb-usb/az6027.c
deleted file mode 100644
index 5e45ae6..0000000
--- a/drivers/media/dvb/dvb-usb/az6027.c
+++ /dev/null
@@ -1,1182 +0,0 @@
-/* DVB USB compliant Linux driver for the AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)
- * receiver.
- *
- * Copyright (C) 2009 Adams.Xu <adams.xu@azwave.com.cn>
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "az6027.h"
-
-#include "stb0899_drv.h"
-#include "stb0899_reg.h"
-#include "stb0899_cfg.h"
-
-#include "stb6100.h"
-#include "stb6100_cfg.h"
-#include "dvb_ca_en50221.h"
-
-int dvb_usb_az6027_debug;
-module_param_named(debug, dvb_usb_az6027_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS);
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-struct az6027_device_state {
-	struct dvb_ca_en50221 ca;
-	struct mutex ca_mutex;
-	u8 power_state;
-};
-
-static const struct stb0899_s1_reg az6027_stb0899_s1_init_1[] = {
-
-	/* 0x0000000b, SYSREG */
-	{ STB0899_DEV_ID		, 0x30 },
-	{ STB0899_DISCNTRL1		, 0x32 },
-	{ STB0899_DISCNTRL2     	, 0x80 },
-	{ STB0899_DISRX_ST0     	, 0x04 },
-	{ STB0899_DISRX_ST1     	, 0x00 },
-	{ STB0899_DISPARITY     	, 0x00 },
-	{ STB0899_DISSTATUS		, 0x20 },
-	{ STB0899_DISF22        	, 0x99 },
-	{ STB0899_DISF22RX      	, 0xa8 },
-	/* SYSREG ? */
-	{ STB0899_ACRPRESC      	, 0x11 },
-	{ STB0899_ACRDIV1       	, 0x0a },
-	{ STB0899_ACRDIV2       	, 0x05 },
-	{ STB0899_DACR1         	, 0x00 },
-	{ STB0899_DACR2         	, 0x00 },
-	{ STB0899_OUTCFG        	, 0x00 },
-	{ STB0899_MODECFG       	, 0x00 },
-	{ STB0899_IRQSTATUS_3		, 0xfe },
-	{ STB0899_IRQSTATUS_2		, 0x03 },
-	{ STB0899_IRQSTATUS_1		, 0x7c },
-	{ STB0899_IRQSTATUS_0		, 0xf4 },
-	{ STB0899_IRQMSK_3      	, 0xf3 },
-	{ STB0899_IRQMSK_2      	, 0xfc },
-	{ STB0899_IRQMSK_1      	, 0xff },
-	{ STB0899_IRQMSK_0		, 0xff },
-	{ STB0899_IRQCFG		, 0x00 },
-	{ STB0899_I2CCFG        	, 0x88 },
-	{ STB0899_I2CRPT        	, 0x58 },
-	{ STB0899_IOPVALUE5		, 0x00 },
-	{ STB0899_IOPVALUE4		, 0x33 },
-	{ STB0899_IOPVALUE3		, 0x6d },
-	{ STB0899_IOPVALUE2		, 0x90 },
-	{ STB0899_IOPVALUE1		, 0x60 },
-	{ STB0899_IOPVALUE0		, 0x00 },
-	{ STB0899_GPIO00CFG     	, 0x82 },
-	{ STB0899_GPIO01CFG     	, 0x82 },
-	{ STB0899_GPIO02CFG     	, 0x82 },
-	{ STB0899_GPIO03CFG     	, 0x82 },
-	{ STB0899_GPIO04CFG     	, 0x82 },
-	{ STB0899_GPIO05CFG     	, 0x82 },
-	{ STB0899_GPIO06CFG     	, 0x82 },
-	{ STB0899_GPIO07CFG     	, 0x82 },
-	{ STB0899_GPIO08CFG     	, 0x82 },
-	{ STB0899_GPIO09CFG     	, 0x82 },
-	{ STB0899_GPIO10CFG     	, 0x82 },
-	{ STB0899_GPIO11CFG     	, 0x82 },
-	{ STB0899_GPIO12CFG     	, 0x82 },
-	{ STB0899_GPIO13CFG     	, 0x82 },
-	{ STB0899_GPIO14CFG     	, 0x82 },
-	{ STB0899_GPIO15CFG     	, 0x82 },
-	{ STB0899_GPIO16CFG     	, 0x82 },
-	{ STB0899_GPIO17CFG     	, 0x82 },
-	{ STB0899_GPIO18CFG     	, 0x82 },
-	{ STB0899_GPIO19CFG     	, 0x82 },
-	{ STB0899_GPIO20CFG     	, 0x82 },
-	{ STB0899_SDATCFG       	, 0xb8 },
-	{ STB0899_SCLTCFG       	, 0xba },
-	{ STB0899_AGCRFCFG      	, 0x1c }, /* 0x11 */
-	{ STB0899_GPIO22        	, 0x82 }, /* AGCBB2CFG */
-	{ STB0899_GPIO21        	, 0x91 }, /* AGCBB1CFG */
-	{ STB0899_DIRCLKCFG     	, 0x82 },
-	{ STB0899_CLKOUT27CFG   	, 0x7e },
-	{ STB0899_STDBYCFG      	, 0x82 },
-	{ STB0899_CS0CFG        	, 0x82 },
-	{ STB0899_CS1CFG        	, 0x82 },
-	{ STB0899_DISEQCOCFG    	, 0x20 },
-	{ STB0899_GPIO32CFG		, 0x82 },
-	{ STB0899_GPIO33CFG		, 0x82 },
-	{ STB0899_GPIO34CFG		, 0x82 },
-	{ STB0899_GPIO35CFG		, 0x82 },
-	{ STB0899_GPIO36CFG		, 0x82 },
-	{ STB0899_GPIO37CFG		, 0x82 },
-	{ STB0899_GPIO38CFG		, 0x82 },
-	{ STB0899_GPIO39CFG		, 0x82 },
-	{ STB0899_NCOARSE       	, 0x17 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */
-	{ STB0899_SYNTCTRL      	, 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */
-	{ STB0899_FILTCTRL      	, 0x00 },
-	{ STB0899_SYSCTRL       	, 0x01 },
-	{ STB0899_STOPCLK1      	, 0x20 },
-	{ STB0899_STOPCLK2      	, 0x00 },
-	{ STB0899_INTBUFSTATUS		, 0x00 },
-	{ STB0899_INTBUFCTRL    	, 0x0a },
-	{ 0xffff			, 0xff },
-};
-
-static const struct stb0899_s1_reg az6027_stb0899_s1_init_3[] = {
-	{ STB0899_DEMOD         	, 0x00 },
-	{ STB0899_RCOMPC        	, 0xc9 },
-	{ STB0899_AGC1CN        	, 0x01 },
-	{ STB0899_AGC1REF       	, 0x10 },
-	{ STB0899_RTC			, 0x23 },
-	{ STB0899_TMGCFG        	, 0x4e },
-	{ STB0899_AGC2REF       	, 0x34 },
-	{ STB0899_TLSR          	, 0x84 },
-	{ STB0899_CFD           	, 0xf7 },
-	{ STB0899_ACLC			, 0x87 },
-	{ STB0899_BCLC          	, 0x94 },
-	{ STB0899_EQON          	, 0x41 },
-	{ STB0899_LDT           	, 0xf1 },
-	{ STB0899_LDT2          	, 0xe3 },
-	{ STB0899_EQUALREF      	, 0xb4 },
-	{ STB0899_TMGRAMP       	, 0x10 },
-	{ STB0899_TMGTHD        	, 0x30 },
-	{ STB0899_IDCCOMP		, 0xfd },
-	{ STB0899_QDCCOMP		, 0xff },
-	{ STB0899_POWERI		, 0x0c },
-	{ STB0899_POWERQ		, 0x0f },
-	{ STB0899_RCOMP			, 0x6c },
-	{ STB0899_AGCIQIN		, 0x80 },
-	{ STB0899_AGC2I1		, 0x06 },
-	{ STB0899_AGC2I2		, 0x00 },
-	{ STB0899_TLIR			, 0x30 },
-	{ STB0899_RTF			, 0x7f },
-	{ STB0899_DSTATUS		, 0x00 },
-	{ STB0899_LDI			, 0xbc },
-	{ STB0899_CFRM			, 0xea },
-	{ STB0899_CFRL			, 0x31 },
-	{ STB0899_NIRM			, 0x2b },
-	{ STB0899_NIRL			, 0x80 },
-	{ STB0899_ISYMB			, 0x1d },
-	{ STB0899_QSYMB			, 0xa6 },
-	{ STB0899_SFRH          	, 0x2f },
-	{ STB0899_SFRM          	, 0x68 },
-	{ STB0899_SFRL          	, 0x40 },
-	{ STB0899_SFRUPH        	, 0x2f },
-	{ STB0899_SFRUPM        	, 0x68 },
-	{ STB0899_SFRUPL        	, 0x40 },
-	{ STB0899_EQUAI1		, 0x02 },
-	{ STB0899_EQUAQ1		, 0xff },
-	{ STB0899_EQUAI2		, 0x04 },
-	{ STB0899_EQUAQ2		, 0x05 },
-	{ STB0899_EQUAI3		, 0x02 },
-	{ STB0899_EQUAQ3		, 0xfd },
-	{ STB0899_EQUAI4		, 0x03 },
-	{ STB0899_EQUAQ4		, 0x07 },
-	{ STB0899_EQUAI5		, 0x08 },
-	{ STB0899_EQUAQ5		, 0xf5 },
-	{ STB0899_DSTATUS2		, 0x00 },
-	{ STB0899_VSTATUS       	, 0x00 },
-	{ STB0899_VERROR		, 0x86 },
-	{ STB0899_IQSWAP		, 0x2a },
-	{ STB0899_ECNT1M		, 0x00 },
-	{ STB0899_ECNT1L		, 0x00 },
-	{ STB0899_ECNT2M		, 0x00 },
-	{ STB0899_ECNT2L		, 0x00 },
-	{ STB0899_ECNT3M		, 0x0a },
-	{ STB0899_ECNT3L		, 0xad },
-	{ STB0899_FECAUTO1      	, 0x06 },
-	{ STB0899_FECM			, 0x01 },
-	{ STB0899_VTH12         	, 0xb0 },
-	{ STB0899_VTH23         	, 0x7a },
-	{ STB0899_VTH34			, 0x58 },
-	{ STB0899_VTH56         	, 0x38 },
-	{ STB0899_VTH67         	, 0x34 },
-	{ STB0899_VTH78         	, 0x24 },
-	{ STB0899_PRVIT         	, 0xff },
-	{ STB0899_VITSYNC       	, 0x19 },
-	{ STB0899_RSULC         	, 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
-	{ STB0899_TSULC         	, 0x42 },
-	{ STB0899_RSLLC         	, 0x41 },
-	{ STB0899_TSLPL			, 0x12 },
-	{ STB0899_TSCFGH        	, 0x0c },
-	{ STB0899_TSCFGM        	, 0x00 },
-	{ STB0899_TSCFGL        	, 0x00 },
-	{ STB0899_TSOUT			, 0x69 }, /* 0x0d for CAM */
-	{ STB0899_RSSYNCDEL     	, 0x00 },
-	{ STB0899_TSINHDELH     	, 0x02 },
-	{ STB0899_TSINHDELM		, 0x00 },
-	{ STB0899_TSINHDELL		, 0x00 },
-	{ STB0899_TSLLSTKM		, 0x1b },
-	{ STB0899_TSLLSTKL		, 0xb3 },
-	{ STB0899_TSULSTKM		, 0x00 },
-	{ STB0899_TSULSTKL		, 0x00 },
-	{ STB0899_PCKLENUL		, 0xbc },
-	{ STB0899_PCKLENLL		, 0xcc },
-	{ STB0899_RSPCKLEN		, 0xbd },
-	{ STB0899_TSSTATUS		, 0x90 },
-	{ STB0899_ERRCTRL1      	, 0xb6 },
-	{ STB0899_ERRCTRL2      	, 0x95 },
-	{ STB0899_ERRCTRL3      	, 0x8d },
-	{ STB0899_DMONMSK1		, 0x27 },
-	{ STB0899_DMONMSK0		, 0x03 },
-	{ STB0899_DEMAPVIT      	, 0x5c },
-	{ STB0899_PLPARM		, 0x19 },
-	{ STB0899_PDELCTRL      	, 0x48 },
-	{ STB0899_PDELCTRL2     	, 0x00 },
-	{ STB0899_BBHCTRL1      	, 0x00 },
-	{ STB0899_BBHCTRL2      	, 0x00 },
-	{ STB0899_HYSTTHRESH    	, 0x77 },
-	{ STB0899_MATCSTM		, 0x00 },
-	{ STB0899_MATCSTL		, 0x00 },
-	{ STB0899_UPLCSTM		, 0x00 },
-	{ STB0899_UPLCSTL		, 0x00 },
-	{ STB0899_DFLCSTM		, 0x00 },
-	{ STB0899_DFLCSTL		, 0x00 },
-	{ STB0899_SYNCCST		, 0x00 },
-	{ STB0899_SYNCDCSTM		, 0x00 },
-	{ STB0899_SYNCDCSTL		, 0x00 },
-	{ STB0899_ISI_ENTRY		, 0x00 },
-	{ STB0899_ISI_BIT_EN		, 0x00 },
-	{ STB0899_MATSTRM		, 0xf0 },
-	{ STB0899_MATSTRL		, 0x02 },
-	{ STB0899_UPLSTRM		, 0x45 },
-	{ STB0899_UPLSTRL		, 0x60 },
-	{ STB0899_DFLSTRM		, 0xe3 },
-	{ STB0899_DFLSTRL		, 0x00 },
-	{ STB0899_SYNCSTR		, 0x47 },
-	{ STB0899_SYNCDSTRM		, 0x05 },
-	{ STB0899_SYNCDSTRL		, 0x18 },
-	{ STB0899_CFGPDELSTATUS1	, 0x19 },
-	{ STB0899_CFGPDELSTATUS2	, 0x2b },
-	{ STB0899_BBFERRORM		, 0x00 },
-	{ STB0899_BBFERRORL		, 0x01 },
-	{ STB0899_UPKTERRORM		, 0x00 },
-	{ STB0899_UPKTERRORL		, 0x00 },
-	{ 0xffff			, 0xff },
-};
-
-
-
-struct stb0899_config az6027_stb0899_config = {
-	.init_dev		= az6027_stb0899_s1_init_1,
-	.init_s2_demod		= stb0899_s2_init_2,
-	.init_s1_demod		= az6027_stb0899_s1_init_3,
-	.init_s2_fec		= stb0899_s2_init_4,
-	.init_tst		= stb0899_s1_init_5,
-
-	.demod_address 		= 0xd0, /* 0x68, 0xd0 >> 1 */
-
-	.xtal_freq		= 27000000,
-	.inversion		= IQ_SWAP_ON, /* 1 */
-
-	.lo_clk			= 76500000,
-	.hi_clk			= 99000000,
-
-	.esno_ave		= STB0899_DVBS2_ESNO_AVE,
-	.esno_quant		= STB0899_DVBS2_ESNO_QUANT,
-	.avframes_coarse	= STB0899_DVBS2_AVFRAMES_COARSE,
-	.avframes_fine		= STB0899_DVBS2_AVFRAMES_FINE,
-	.miss_threshold		= STB0899_DVBS2_MISS_THRESHOLD,
-	.uwp_threshold_acq	= STB0899_DVBS2_UWP_THRESHOLD_ACQ,
-	.uwp_threshold_track	= STB0899_DVBS2_UWP_THRESHOLD_TRACK,
-	.uwp_threshold_sof	= STB0899_DVBS2_UWP_THRESHOLD_SOF,
-	.sof_search_timeout	= STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
-
-	.btr_nco_bits		= STB0899_DVBS2_BTR_NCO_BITS,
-	.btr_gain_shift_offset	= STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
-	.crl_nco_bits		= STB0899_DVBS2_CRL_NCO_BITS,
-	.ldpc_max_iter		= STB0899_DVBS2_LDPC_MAX_ITER,
-
-	.tuner_get_frequency	= stb6100_get_frequency,
-	.tuner_set_frequency	= stb6100_set_frequency,
-	.tuner_set_bandwidth	= stb6100_set_bandwidth,
-	.tuner_get_bandwidth	= stb6100_get_bandwidth,
-	.tuner_set_rfsiggain	= NULL,
-};
-
-struct stb6100_config az6027_stb6100_config = {
-	.tuner_address	= 0xc0,
-	.refclock	= 27000000,
-};
-
-
-/* check for mutex FIXME */
-int az6027_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
-{
-	int ret = -1;
-	if (mutex_lock_interruptible(&d->usb_mutex))
-		return -EAGAIN;
-
-	ret = usb_control_msg(d->udev,
-			      usb_rcvctrlpipe(d->udev, 0),
-			      req,
-			      USB_TYPE_VENDOR | USB_DIR_IN,
-			      value,
-			      index,
-			      b,
-			      blen,
-			      2000);
-
-	if (ret < 0) {
-		warn("usb in operation failed. (%d)", ret);
-		ret = -EIO;
-	} else
-		ret = 0;
-
-	deb_xfer("in: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, index);
-	debug_dump(b, blen, deb_xfer);
-
-	mutex_unlock(&d->usb_mutex);
-	return ret;
-}
-
-static int az6027_usb_out_op(struct dvb_usb_device *d,
-			     u8 req,
-			     u16 value,
-			     u16 index,
-			     u8 *b,
-			     int blen)
-{
-	int ret;
-
-	deb_xfer("out: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, index);
-	debug_dump(b, blen, deb_xfer);
-
-	if (mutex_lock_interruptible(&d->usb_mutex))
-		return -EAGAIN;
-
-	ret = usb_control_msg(d->udev,
-			      usb_sndctrlpipe(d->udev, 0),
-			      req,
-			      USB_TYPE_VENDOR | USB_DIR_OUT,
-			      value,
-			      index,
-			      b,
-			      blen,
-			      2000);
-
-	if (ret != blen) {
-		warn("usb out operation failed. (%d)", ret);
-		mutex_unlock(&d->usb_mutex);
-		return -EIO;
-	} else{
-		mutex_unlock(&d->usb_mutex);
-		return 0;
-	}
-}
-
-static int az6027_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	int ret;
-	u8 req;
-	u16 value;
-	u16 index;
-	int blen;
-
-	deb_info("%s %d", __func__, onoff);
-
-	req = 0xBC;
-	value = onoff;
-	index = 0;
-	blen = 0;
-
-	ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
-	if (ret != 0)
-		warn("usb out operation failed. (%d)", ret);
-
-	return ret;
-}
-
-/* keys for the enclosed remote control */
-static struct rc_map_table rc_map_az6027_table[] = {
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-};
-
-/* remote control stuff (does not work with my box) */
-static int az6027_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
-{
-	return 0;
-}
-
-/*
-int az6027_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	u8 v = onoff;
-	return az6027_usb_out_op(d,0xBC,v,3,NULL,1);
-}
-*/
-
-static int az6027_ci_read_attribute_mem(struct dvb_ca_en50221 *ca,
-					int slot,
-					int address)
-{
-	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
-	struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
-
-	int ret;
-	u8 req;
-	u16 value;
-	u16 index;
-	int blen;
-	u8 *b;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	b = kmalloc(12, GFP_KERNEL);
-	if (!b)
-		return -ENOMEM;
-
-	mutex_lock(&state->ca_mutex);
-
-	req = 0xC1;
-	value = address;
-	index = 0;
-	blen = 1;
-
-	ret = az6027_usb_in_op(d, req, value, index, b, blen);
-	if (ret < 0) {
-		warn("usb in operation failed. (%d)", ret);
-		ret = -EINVAL;
-	} else {
-		ret = b[0];
-	}
-
-	mutex_unlock(&state->ca_mutex);
-	kfree(b);
-	return ret;
-}
-
-static int az6027_ci_write_attribute_mem(struct dvb_ca_en50221 *ca,
-					 int slot,
-					 int address,
-					 u8 value)
-{
-	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
-	struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
-
-	int ret;
-	u8 req;
-	u16 value1;
-	u16 index;
-	int blen;
-
-	deb_info("%s %d", __func__, slot);
-	if (slot != 0)
-		return -EINVAL;
-
-	mutex_lock(&state->ca_mutex);
-	req = 0xC2;
-	value1 = address;
-	index = value;
-	blen = 0;
-
-	ret = az6027_usb_out_op(d, req, value1, index, NULL, blen);
-	if (ret != 0)
-		warn("usb out operation failed. (%d)", ret);
-
-	mutex_unlock(&state->ca_mutex);
-	return ret;
-}
-
-static int az6027_ci_read_cam_control(struct dvb_ca_en50221 *ca,
-				      int slot,
-				      u8 address)
-{
-	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
-	struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
-
-	int ret;
-	u8 req;
-	u16 value;
-	u16 index;
-	int blen;
-	u8 *b;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	b = kmalloc(12, GFP_KERNEL);
-	if (!b)
-		return -ENOMEM;
-
-	mutex_lock(&state->ca_mutex);
-
-	req = 0xC3;
-	value = address;
-	index = 0;
-	blen = 2;
-
-	ret = az6027_usb_in_op(d, req, value, index, b, blen);
-	if (ret < 0) {
-		warn("usb in operation failed. (%d)", ret);
-		ret = -EINVAL;
-	} else {
-		if (b[0] == 0)
-			warn("Read CI IO error");
-
-		ret = b[1];
-		deb_info("read cam data = %x from 0x%x", b[1], value);
-	}
-
-	mutex_unlock(&state->ca_mutex);
-	kfree(b);
-	return ret;
-}
-
-static int az6027_ci_write_cam_control(struct dvb_ca_en50221 *ca,
-				       int slot,
-				       u8 address,
-				       u8 value)
-{
-	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
-	struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
-
-	int ret;
-	u8 req;
-	u16 value1;
-	u16 index;
-	int blen;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	mutex_lock(&state->ca_mutex);
-	req = 0xC4;
-	value1 = address;
-	index = value;
-	blen = 0;
-
-	ret = az6027_usb_out_op(d, req, value1, index, NULL, blen);
-	if (ret != 0) {
-		warn("usb out operation failed. (%d)", ret);
-		goto failed;
-	}
-
-failed:
-	mutex_unlock(&state->ca_mutex);
-	return ret;
-}
-
-static int CI_CamReady(struct dvb_ca_en50221 *ca, int slot)
-{
-	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
-
-	int ret;
-	u8 req;
-	u16 value;
-	u16 index;
-	int blen;
-	u8 *b;
-
-	b = kmalloc(12, GFP_KERNEL);
-	if (!b)
-		return -ENOMEM;
-
-	req = 0xC8;
-	value = 0;
-	index = 0;
-	blen = 1;
-
-	ret = az6027_usb_in_op(d, req, value, index, b, blen);
-	if (ret < 0) {
-		warn("usb in operation failed. (%d)", ret);
-		ret = -EIO;
-	} else{
-		ret = b[0];
-	}
-	kfree(b);
-	return ret;
-}
-
-static int az6027_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot)
-{
-	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
-	struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
-
-	int ret, i;
-	u8 req;
-	u16 value;
-	u16 index;
-	int blen;
-
-	mutex_lock(&state->ca_mutex);
-
-	req = 0xC6;
-	value = 1;
-	index = 0;
-	blen = 0;
-
-	ret = az6027_usb_out_op(d, req, value, index, NULL, blen);
-	if (ret != 0) {
-		warn("usb out operation failed. (%d)", ret);
-		goto failed;
-	}
-
-	msleep(500);
-	req = 0xC6;
-	value = 0;
-	index = 0;
-	blen = 0;
-
-	ret = az6027_usb_out_op(d, req, value, index, NULL, blen);
-	if (ret != 0) {
-		warn("usb out operation failed. (%d)", ret);
-		goto failed;
-	}
-
-	for (i = 0; i < 15; i++) {
-		msleep(100);
-
-		if (CI_CamReady(ca, slot)) {
-			deb_info("CAM Ready");
-			break;
-		}
-	}
-	msleep(5000);
-
-failed:
-	mutex_unlock(&state->ca_mutex);
-	return ret;
-}
-
-static int az6027_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
-{
-	return 0;
-}
-
-static int az6027_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
-{
-	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
-	struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
-
-	int ret;
-	u8 req;
-	u16 value;
-	u16 index;
-	int blen;
-
-	deb_info("%s", __func__);
-	mutex_lock(&state->ca_mutex);
-	req = 0xC7;
-	value = 1;
-	index = 0;
-	blen = 0;
-
-	ret = az6027_usb_out_op(d, req, value, index, NULL, blen);
-	if (ret != 0) {
-		warn("usb out operation failed. (%d)", ret);
-		goto failed;
-	}
-
-failed:
-	mutex_unlock(&state->ca_mutex);
-	return ret;
-}
-
-static int az6027_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
-{
-	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
-	struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
-	int ret;
-	u8 req;
-	u16 value;
-	u16 index;
-	int blen;
-	u8 *b;
-
-	b = kmalloc(12, GFP_KERNEL);
-	if (!b)
-		return -ENOMEM;
-	mutex_lock(&state->ca_mutex);
-
-	req = 0xC5;
-	value = 0;
-	index = 0;
-	blen = 1;
-
-	ret = az6027_usb_in_op(d, req, value, index, b, blen);
-	if (ret < 0) {
-		warn("usb in operation failed. (%d)", ret);
-		ret = -EIO;
-	} else
-		ret = 0;
-
-	if (!ret && b[0] == 1) {
-		ret = DVB_CA_EN50221_POLL_CAM_PRESENT |
-		      DVB_CA_EN50221_POLL_CAM_READY;
-	}
-
-	mutex_unlock(&state->ca_mutex);
-	kfree(b);
-	return ret;
-}
-
-
-static void az6027_ci_uninit(struct dvb_usb_device *d)
-{
-	struct az6027_device_state *state;
-
-	deb_info("%s", __func__);
-
-	if (NULL == d)
-		return;
-
-	state = (struct az6027_device_state *)d->priv;
-	if (NULL == state)
-		return;
-
-	if (NULL == state->ca.data)
-		return;
-
-	dvb_ca_en50221_release(&state->ca);
-
-	memset(&state->ca, 0, sizeof(state->ca));
-}
-
-
-static int az6027_ci_init(struct dvb_usb_adapter *a)
-{
-	struct dvb_usb_device *d = a->dev;
-	struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
-	int ret;
-
-	deb_info("%s", __func__);
-
-	mutex_init(&state->ca_mutex);
-
-	state->ca.owner			= THIS_MODULE;
-	state->ca.read_attribute_mem	= az6027_ci_read_attribute_mem;
-	state->ca.write_attribute_mem	= az6027_ci_write_attribute_mem;
-	state->ca.read_cam_control	= az6027_ci_read_cam_control;
-	state->ca.write_cam_control	= az6027_ci_write_cam_control;
-	state->ca.slot_reset		= az6027_ci_slot_reset;
-	state->ca.slot_shutdown		= az6027_ci_slot_shutdown;
-	state->ca.slot_ts_enable	= az6027_ci_slot_ts_enable;
-	state->ca.poll_slot_status	= az6027_ci_poll_slot_status;
-	state->ca.data			= d;
-
-	ret = dvb_ca_en50221_init(&a->dvb_adap,
-				  &state->ca,
-				  0, /* flags */
-				  1);/* n_slots */
-	if (ret != 0) {
-		err("Cannot initialize CI: Error %d.", ret);
-		memset(&state->ca, 0, sizeof(state->ca));
-		return ret;
-	}
-
-	deb_info("CI initialized.");
-
-	return 0;
-}
-
-/*
-static int az6027_read_mac_addr(struct dvb_usb_device *d, u8 mac[6])
-{
-	az6027_usb_in_op(d, 0xb7, 6, 0, &mac[0], 6);
-	return 0;
-}
-*/
-
-static int az6027_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-{
-
-	u8 buf;
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-
-	struct i2c_msg i2c_msg = {
-		.addr	= 0x99,
-		.flags	= 0,
-		.buf	= &buf,
-		.len	= 1
-	};
-
-	/*
-	 * 2   --18v
-	 * 1   --13v
-	 * 0   --off
-	 */
-	switch (voltage) {
-	case SEC_VOLTAGE_13:
-		buf = 1;
-		i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
-		break;
-
-	case SEC_VOLTAGE_18:
-		buf = 2;
-		i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
-		break;
-
-	case SEC_VOLTAGE_OFF:
-		buf = 0;
-		i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-
-static int az6027_frontend_poweron(struct dvb_usb_adapter *adap)
-{
-	int ret;
-	u8 req;
-	u16 value;
-	u16 index;
-	int blen;
-
-	req = 0xBC;
-	value = 1; /* power on */
-	index = 3;
-	blen = 0;
-
-	ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
-	if (ret != 0)
-		return -EIO;
-
-	return 0;
-}
-static int az6027_frontend_reset(struct dvb_usb_adapter *adap)
-{
-	int ret;
-	u8 req;
-	u16 value;
-	u16 index;
-	int blen;
-
-	/* reset demodulator */
-	req = 0xC0;
-	value = 1; /* high */
-	index = 3;
-	blen = 0;
-
-	ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
-	if (ret != 0)
-		return -EIO;
-
-	req = 0xC0;
-	value = 0; /* low */
-	index = 3;
-	blen = 0;
-	msleep_interruptible(200);
-
-	ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
-	if (ret != 0)
-		return -EIO;
-
-	msleep_interruptible(200);
-
-	req = 0xC0;
-	value = 1; /*high */
-	index = 3;
-	blen = 0;
-
-	ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
-	if (ret != 0)
-		return -EIO;
-
-	msleep_interruptible(200);
-	return 0;
-}
-
-static int az6027_frontend_tsbypass(struct dvb_usb_adapter *adap, int onoff)
-{
-	int ret;
-	u8 req;
-	u16 value;
-	u16 index;
-	int blen;
-
-	/* TS passthrough */
-	req = 0xC7;
-	value = onoff;
-	index = 0;
-	blen = 0;
-
-	ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
-	if (ret != 0)
-		return -EIO;
-
-	return 0;
-}
-
-static int az6027_frontend_attach(struct dvb_usb_adapter *adap)
-{
-
-	az6027_frontend_poweron(adap);
-	az6027_frontend_reset(adap);
-
-	deb_info("adap = %p, dev = %p\n", adap, adap->dev);
-	adap->fe_adap[0].fe = stb0899_attach(&az6027_stb0899_config, &adap->dev->i2c_adap);
-
-	if (adap->fe_adap[0].fe) {
-		deb_info("found STB0899 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb0899_config.demod_address);
-		if (stb6100_attach(adap->fe_adap[0].fe, &az6027_stb6100_config, &adap->dev->i2c_adap)) {
-			deb_info("found STB6100 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb6100_config.tuner_address);
-			adap->fe_adap[0].fe->ops.set_voltage = az6027_set_voltage;
-			az6027_ci_init(adap);
-		} else {
-			adap->fe_adap[0].fe = NULL;
-		}
-	} else
-		warn("no front-end attached\n");
-
-	az6027_frontend_tsbypass(adap, 0);
-
-	return 0;
-}
-
-static struct dvb_usb_device_properties az6027_properties;
-
-static void az6027_usb_disconnect(struct usb_interface *intf)
-{
-	struct dvb_usb_device *d = usb_get_intfdata(intf);
-	az6027_ci_uninit(d);
-	dvb_usb_device_exit(intf);
-}
-
-
-static int az6027_usb_probe(struct usb_interface *intf,
-			    const struct usb_device_id *id)
-{
-	return dvb_usb_device_init(intf,
-				   &az6027_properties,
-				   THIS_MODULE,
-				   NULL,
-				   adapter_nr);
-}
-
-/* I2C */
-static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	int i = 0, j = 0, len = 0;
-	u16 index;
-	u16 value;
-	int length;
-	u8 req;
-	u8 *data;
-
-	data = kmalloc(256, GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0) {
-		kfree(data);
-		return -EAGAIN;
-	}
-
-	if (num > 2)
-		warn("more than 2 i2c messages at a time is not handled yet. TODO.");
-
-	for (i = 0; i < num; i++) {
-
-		if (msg[i].addr == 0x99) {
-			req = 0xBE;
-			index = 0;
-			value = msg[i].buf[0] & 0x00ff;
-			length = 1;
-			az6027_usb_out_op(d, req, value, index, data, length);
-		}
-
-		if (msg[i].addr == 0xd0) {
-			/* write/read request */
-			if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) {
-				req = 0xB9;
-				index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff));
-				value = msg[i].addr + (msg[i].len << 8);
-				length = msg[i + 1].len + 6;
-				az6027_usb_in_op(d, req, value, index, data, length);
-				len = msg[i + 1].len;
-				for (j = 0; j < len; j++)
-					msg[i + 1].buf[j] = data[j + 5];
-
-				i++;
-			} else {
-
-				/* demod 16bit addr */
-				req = 0xBD;
-				index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff));
-				value = msg[i].addr + (2 << 8);
-				length = msg[i].len - 2;
-				len = msg[i].len - 2;
-				for (j = 0; j < len; j++)
-					data[j] = msg[i].buf[j + 2];
-				az6027_usb_out_op(d, req, value, index, data, length);
-			}
-		}
-
-		if (msg[i].addr == 0xc0) {
-			if (msg[i].flags & I2C_M_RD) {
-
-				req = 0xB9;
-				index = 0x0;
-				value = msg[i].addr;
-				length = msg[i].len + 6;
-				az6027_usb_in_op(d, req, value, index, data, length);
-				len = msg[i].len;
-				for (j = 0; j < len; j++)
-					msg[i].buf[j] = data[j + 5];
-
-			} else {
-
-				req = 0xBD;
-				index = msg[i].buf[0] & 0x00FF;
-				value = msg[i].addr + (1 << 8);
-				length = msg[i].len - 1;
-				len = msg[i].len - 1;
-
-				for (j = 0; j < len; j++)
-					data[j] = msg[i].buf[j + 1];
-
-				az6027_usb_out_op(d, req, value, index, data, length);
-			}
-		}
-	}
-	mutex_unlock(&d->i2c_mutex);
-	kfree(data);
-
-	return i;
-}
-
-
-static u32 az6027_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm az6027_i2c_algo = {
-	.master_xfer   = az6027_i2c_xfer,
-	.functionality = az6027_i2c_func,
-};
-
-int az6027_identify_state(struct usb_device *udev,
-			  struct dvb_usb_device_properties *props,
-			  struct dvb_usb_device_description **desc,
-			  int *cold)
-{
-	u8 *b;
-	s16 ret;
-
-	b = kmalloc(16, GFP_KERNEL);
-	if (!b)
-		return -ENOMEM;
-
-	ret = usb_control_msg(udev,
-				  usb_rcvctrlpipe(udev, 0),
-				  0xb7,
-				  USB_TYPE_VENDOR | USB_DIR_IN,
-				  6,
-				  0,
-				  b,
-				  6,
-				  USB_CTRL_GET_TIMEOUT);
-
-	*cold = ret <= 0;
-	kfree(b);
-	deb_info("cold: %d\n", *cold);
-	return 0;
-}
-
-
-static struct usb_device_id az6027_usb_table[] = {
-	{ USB_DEVICE(USB_VID_AZUREWAVE, USB_PID_AZUREWAVE_AZ6027) },
-	{ USB_DEVICE(USB_VID_TERRATEC,  USB_PID_TERRATEC_DVBS2CI_V1) },
-	{ USB_DEVICE(USB_VID_TERRATEC,  USB_PID_TERRATEC_DVBS2CI_V2) },
-	{ USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_HDCI_V1) },
-	{ USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_HDCI_V2) },
-	{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_SAT) },
-	{ },
-};
-
-MODULE_DEVICE_TABLE(usb, az6027_usb_table);
-
-static struct dvb_usb_device_properties az6027_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-	.usb_ctrl = CYPRESS_FX2,
-	.firmware            = "dvb-usb-az6027-03.fw",
-	.no_reconnect        = 1,
-
-	.size_of_priv     = sizeof(struct az6027_device_state),
-	.identify_state		= az6027_identify_state,
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = az6027_streaming_ctrl,
-			.frontend_attach  = az6027_frontend_attach,
-
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 10,
-				.endpoint = 0x02,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			},
-		}},
-		}
-	},
-/*
-	.power_ctrl       = az6027_power_ctrl,
-	.read_mac_address = az6027_read_mac_addr,
- */
-	.rc.legacy = {
-		.rc_map_table     = rc_map_az6027_table,
-		.rc_map_size      = ARRAY_SIZE(rc_map_az6027_table),
-		.rc_interval      = 400,
-		.rc_query         = az6027_rc_query,
-	},
-
-	.i2c_algo         = &az6027_i2c_algo,
-
-	.num_device_descs = 6,
-	.devices = {
-		{
-			.name = "AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)",
-			.cold_ids = { &az6027_usb_table[0], NULL },
-			.warm_ids = { NULL },
-		}, {
-			.name = "TERRATEC S7",
-			.cold_ids = { &az6027_usb_table[1], NULL },
-			.warm_ids = { NULL },
-		}, {
-			.name = "TERRATEC S7 MKII",
-			.cold_ids = { &az6027_usb_table[2], NULL },
-			.warm_ids = { NULL },
-		}, {
-			.name = "Technisat SkyStar USB 2 HD CI",
-			.cold_ids = { &az6027_usb_table[3], NULL },
-			.warm_ids = { NULL },
-		}, {
-			.name = "Technisat SkyStar USB 2 HD CI",
-			.cold_ids = { &az6027_usb_table[4], NULL },
-			.warm_ids = { NULL },
-		}, {
-			.name = "Elgato EyeTV Sat",
-			.cold_ids = { &az6027_usb_table[5], NULL },
-			.warm_ids = { NULL },
-		},
-		{ NULL },
-	}
-};
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver az6027_usb_driver = {
-	.name		= "dvb_usb_az6027",
-	.probe 		= az6027_usb_probe,
-	.disconnect 	= az6027_usb_disconnect,
-	.id_table 	= az6027_usb_table,
-};
-
-module_usb_driver(az6027_usb_driver);
-
-MODULE_AUTHOR("Adams Xu <Adams.xu@azwave.com.cn>");
-MODULE_DESCRIPTION("Driver for AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)");
-MODULE_VERSION("1.0");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/az6027.h b/drivers/media/dvb/dvb-usb/az6027.h
deleted file mode 100644
index f3afe17..0000000
--- a/drivers/media/dvb/dvb-usb/az6027.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _DVB_USB_VP6027_H_
-#define _DVB_USB_VP6027_H_
-
-#define DVB_USB_LOG_PREFIX "az6027"
-#include "dvb-usb.h"
-
-
-extern int dvb_usb_az6027_debug;
-#define deb_info(args...) dprintk(dvb_usb_az6027_debug, 0x01, args)
-#define deb_xfer(args...) dprintk(dvb_usb_az6027_debug, 0x02, args)
-#define deb_rc(args...)   dprintk(dvb_usb_az6027_debug, 0x04, args)
-#define deb_fe(args...)   dprintk(dvb_usb_az6027_debug, 0x08, args)
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/ce6230.c b/drivers/media/dvb/dvb-usb/ce6230.c
deleted file mode 100644
index fa63725..0000000
--- a/drivers/media/dvb/dvb-usb/ce6230.c
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * DVB USB Linux driver for Intel CE6230 DVB-T USB2.0 receiver
- *
- * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include "ce6230.h"
-#include "zl10353.h"
-#include "mxl5005s.h"
-
-/* debug */
-static int dvb_usb_ce6230_debug;
-module_param_named(debug, dvb_usb_ce6230_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static struct zl10353_config ce6230_zl10353_config;
-
-static int ce6230_rw_udev(struct usb_device *udev, struct req_t *req)
-{
-	int ret;
-	unsigned int pipe;
-	u8 request;
-	u8 requesttype;
-	u16 value;
-	u16 index;
-	u8 *buf;
-
-	request = req->cmd;
-	value = req->value;
-	index = req->index;
-
-	switch (req->cmd) {
-	case I2C_READ:
-	case DEMOD_READ:
-	case REG_READ:
-		requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
-		break;
-	case I2C_WRITE:
-	case DEMOD_WRITE:
-	case REG_WRITE:
-		requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
-		break;
-	default:
-		err("unknown command:%02x", req->cmd);
-		ret = -EPERM;
-		goto error;
-	}
-
-	buf = kmalloc(req->data_len, GFP_KERNEL);
-	if (!buf) {
-		ret = -ENOMEM;
-		goto error;
-	}
-
-	if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) {
-		/* write */
-		memcpy(buf, req->data, req->data_len);
-		pipe = usb_sndctrlpipe(udev, 0);
-	} else {
-		/* read */
-		pipe = usb_rcvctrlpipe(udev, 0);
-	}
-
-	msleep(1); /* avoid I2C errors */
-
-	ret = usb_control_msg(udev, pipe, request, requesttype, value, index,
-				buf, req->data_len, CE6230_USB_TIMEOUT);
-
-	ce6230_debug_dump(request, requesttype, value, index, buf,
-		req->data_len, deb_xfer);
-
-	if (ret < 0)
-		deb_info("%s: usb_control_msg failed:%d\n", __func__, ret);
-	else
-		ret = 0;
-
-	/* read request, copy returned data to return buf */
-	if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
-		memcpy(req->data, buf, req->data_len);
-
-	kfree(buf);
-error:
-	return ret;
-}
-
-static int ce6230_ctrl_msg(struct dvb_usb_device *d, struct req_t *req)
-{
-	return ce6230_rw_udev(d->udev, req);
-}
-
-/* I2C */
-static int ce6230_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
-			   int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	int i = 0;
-	struct req_t req;
-	int ret = 0;
-	memset(&req, 0, sizeof(req));
-
-	if (num > 2)
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	while (i < num) {
-		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
-			if (msg[i].addr ==
-				ce6230_zl10353_config.demod_address) {
-				req.cmd = DEMOD_READ;
-				req.value = msg[i].addr >> 1;
-				req.index = msg[i].buf[0];
-				req.data_len = msg[i+1].len;
-				req.data = &msg[i+1].buf[0];
-				ret = ce6230_ctrl_msg(d, &req);
-			} else {
-				err("i2c read not implemented");
-				ret = -EPERM;
-			}
-			i += 2;
-		} else {
-			if (msg[i].addr ==
-				ce6230_zl10353_config.demod_address) {
-				req.cmd = DEMOD_WRITE;
-				req.value = msg[i].addr >> 1;
-				req.index = msg[i].buf[0];
-				req.data_len = msg[i].len-1;
-				req.data = &msg[i].buf[1];
-				ret = ce6230_ctrl_msg(d, &req);
-			} else {
-				req.cmd = I2C_WRITE;
-				req.value = 0x2000 + (msg[i].addr >> 1);
-				req.index = 0x0000;
-				req.data_len = msg[i].len;
-				req.data = &msg[i].buf[0];
-				ret = ce6230_ctrl_msg(d, &req);
-			}
-			i += 1;
-		}
-		if (ret)
-			break;
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-	return ret ? ret : i;
-}
-
-static u32 ce6230_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm ce6230_i2c_algo = {
-	.master_xfer   = ce6230_i2c_xfer,
-	.functionality = ce6230_i2c_func,
-};
-
-/* Callbacks for DVB USB */
-static struct zl10353_config ce6230_zl10353_config = {
-	.demod_address = 0x1e,
-	.adc_clock = 450000,
-	.if2 = 45700,
-	.no_tuner = 1,
-	.parallel_ts = 1,
-	.clock_ctl_1 = 0x34,
-	.pll_0 = 0x0e,
-};
-
-static int ce6230_zl10353_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	deb_info("%s:\n", __func__);
-	adap->fe_adap[0].fe = dvb_attach(zl10353_attach, &ce6230_zl10353_config,
-		&adap->dev->i2c_adap);
-	if (adap->fe_adap[0].fe == NULL)
-		return -ENODEV;
-	return 0;
-}
-
-static struct mxl5005s_config ce6230_mxl5003s_config = {
-	.i2c_address     = 0xc6,
-	.if_freq         = IF_FREQ_4570000HZ,
-	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
-	.agc_mode        = MXL_SINGLE_AGC,
-	.tracking_filter = MXL_TF_DEFAULT,
-	.rssi_enable     = MXL_RSSI_ENABLE,
-	.cap_select      = MXL_CAP_SEL_ENABLE,
-	.div_out         = MXL_DIV_OUT_4,
-	.clock_out       = MXL_CLOCK_OUT_DISABLE,
-	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
-	.top		 = MXL5005S_TOP_25P2,
-	.mod_mode        = MXL_DIGITAL_MODE,
-	.if_mode         = MXL_ZERO_IF,
-	.AgcMasterByte   = 0x00,
-};
-
-static int ce6230_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	int ret;
-	deb_info("%s:\n", __func__);
-	ret = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap,
-			&ce6230_mxl5003s_config) == NULL ? -ENODEV : 0;
-	return ret;
-}
-
-static int ce6230_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	int ret;
-	deb_info("%s: onoff:%d\n", __func__, onoff);
-
-	/* InterfaceNumber 1 / AlternateSetting 0     idle
-	   InterfaceNumber 1 / AlternateSetting 1     streaming */
-	ret = usb_set_interface(d->udev, 1, onoff);
-	if (ret)
-		err("usb_set_interface failed with error:%d", ret);
-
-	return ret;
-}
-
-/* DVB USB Driver stuff */
-static struct dvb_usb_device_properties ce6230_properties;
-
-static int ce6230_probe(struct usb_interface *intf,
-			const struct usb_device_id *id)
-{
-	int ret = 0;
-	struct dvb_usb_device *d = NULL;
-
-	deb_info("%s: interface:%d\n", __func__,
-		intf->cur_altsetting->desc.bInterfaceNumber);
-
-	if (intf->cur_altsetting->desc.bInterfaceNumber == 1) {
-		ret = dvb_usb_device_init(intf, &ce6230_properties, THIS_MODULE,
-			&d, adapter_nr);
-		if (ret)
-			err("init failed with error:%d\n", ret);
-	}
-
-	return ret;
-}
-
-static struct usb_device_id ce6230_table[] = {
-	{ USB_DEVICE(USB_VID_INTEL, USB_PID_INTEL_CE9500) },
-	{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A310) },
-	{ } /* Terminating entry */
-};
-MODULE_DEVICE_TABLE(usb, ce6230_table);
-
-static struct dvb_usb_device_properties ce6230_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = DEVICE_SPECIFIC,
-	.no_reconnect = 1,
-
-	.size_of_priv = 0,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.frontend_attach  = ce6230_zl10353_frontend_attach,
-			.tuner_attach     = ce6230_mxl5003s_tuner_attach,
-			.stream = {
-				.type = USB_BULK,
-				.count = 6,
-				.endpoint = 0x82,
-				.u = {
-					.bulk = {
-						.buffersize = (16*512),
-					}
-				}
-			},
-		}},
-		}
-	},
-
-	.power_ctrl = ce6230_power_ctrl,
-
-	.i2c_algo = &ce6230_i2c_algo,
-
-	.num_device_descs = 2,
-	.devices = {
-		{
-			.name = "Intel CE9500 reference design",
-			.cold_ids = {NULL},
-			.warm_ids = {&ce6230_table[0], NULL},
-		},
-		{
-			.name = "AVerMedia A310 USB 2.0 DVB-T tuner",
-			.cold_ids = {NULL},
-			.warm_ids = {&ce6230_table[1], NULL},
-		},
-	}
-};
-
-static struct usb_driver ce6230_driver = {
-	.name       = "dvb_usb_ce6230",
-	.probe      = ce6230_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table   = ce6230_table,
-};
-
-module_usb_driver(ce6230_driver);
-
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_DESCRIPTION("Driver for Intel CE6230 DVB-T USB2.0");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/ce6230.h b/drivers/media/dvb/dvb-usb/ce6230.h
deleted file mode 100644
index 97c4248..0000000
--- a/drivers/media/dvb/dvb-usb/ce6230.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * DVB USB Linux driver for Intel CE6230 DVB-T USB2.0 receiver
- *
- * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _DVB_USB_CE6230_H_
-#define _DVB_USB_CE6230_H_
-
-#define DVB_USB_LOG_PREFIX "ce6230"
-#include "dvb-usb.h"
-
-#define deb_info(args...) dprintk(dvb_usb_ce6230_debug, 0x01, args)
-#define deb_rc(args...)   dprintk(dvb_usb_ce6230_debug, 0x02, args)
-#define deb_xfer(args...) dprintk(dvb_usb_ce6230_debug, 0x04, args)
-#define deb_reg(args...)  dprintk(dvb_usb_ce6230_debug, 0x08, args)
-#define deb_i2c(args...)  dprintk(dvb_usb_ce6230_debug, 0x10, args)
-#define deb_fw(args...)   dprintk(dvb_usb_ce6230_debug, 0x20, args)
-
-#define ce6230_debug_dump(r, t, v, i, b, l, func) { \
-	int loop_; \
-	func("%02x %02x %02x %02x %02x %02x %02x %02x", \
-		t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, l & 0xff, l >> 8); \
-	if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \
-		func(" >>> "); \
-	else \
-		func(" <<< "); \
-	for (loop_ = 0; loop_ < l; loop_++) \
-		func("%02x ", b[loop_]); \
-	func("\n");\
-}
-
-#define CE6230_USB_TIMEOUT 1000
-
-struct req_t {
-	u8  cmd;       /* [1] */
-	u16 value;     /* [2|3] */
-	u16 index;     /* [4|5] */
-	u16 data_len;  /* [6|7] */
-	u8  *data;
-};
-
-enum ce6230_cmd {
-	CONFIG_READ          = 0xd0, /* rd 0 (unclear) */
-	UNKNOWN_WRITE        = 0xc7, /* wr 7 (unclear) */
-	I2C_READ             = 0xd9, /* rd 9 (unclear) */
-	I2C_WRITE            = 0xca, /* wr a */
-	DEMOD_READ           = 0xdb, /* rd b */
-	DEMOD_WRITE          = 0xcc, /* wr c */
-	REG_READ             = 0xde, /* rd e */
-	REG_WRITE            = 0xcf, /* wr f */
-};
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/cinergyT2-core.c b/drivers/media/dvb/dvb-usb/cinergyT2-core.c
deleted file mode 100644
index 0a98548..0000000
--- a/drivers/media/dvb/dvb-usb/cinergyT2-core.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * TerraTec Cinergy T2/qanu USB2 DVB-T adapter.
- *
- * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi)
- *
- * Based on the dvb-usb-framework code and the
- * original Terratec Cinergy T2 driver by:
- *
- * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and
- *		    Holger Waechtler <holger@qanu.de>
- *
- *  Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include "cinergyT2.h"
-
-
-/* debug */
-int dvb_usb_cinergyt2_debug;
-
-module_param_named(debug, dvb_usb_cinergyt2_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info, xfer=2, rc=4 "
-		"(or-able)).");
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-struct cinergyt2_state {
-	u8 rc_counter;
-};
-
-/* We are missing a release hook with usb_device data */
-static struct dvb_usb_device *cinergyt2_usb_device;
-
-static struct dvb_usb_device_properties cinergyt2_properties;
-
-static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable)
-{
-	char buf[] = { CINERGYT2_EP1_CONTROL_STREAM_TRANSFER, enable ? 1 : 0 };
-	char result[64];
-	return dvb_usb_generic_rw(adap->dev, buf, sizeof(buf), result,
-				sizeof(result), 0);
-}
-
-static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable)
-{
-	char buf[] = { CINERGYT2_EP1_SLEEP_MODE, enable ? 0 : 1 };
-	char state[3];
-	return dvb_usb_generic_rw(d, buf, sizeof(buf), state, sizeof(state), 0);
-}
-
-static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	char query[] = { CINERGYT2_EP1_GET_FIRMWARE_VERSION };
-	char state[3];
-	int ret;
-
-	adap->fe_adap[0].fe = cinergyt2_fe_attach(adap->dev);
-
-	ret = dvb_usb_generic_rw(adap->dev, query, sizeof(query), state,
-				sizeof(state), 0);
-	if (ret < 0) {
-		deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep "
-			"state info\n");
-	}
-
-	/* Copy this pointer as we are gonna need it in the release phase */
-	cinergyt2_usb_device = adap->dev;
-
-	return 0;
-}
-
-static struct rc_map_table rc_map_cinergyt2_table[] = {
-	{ 0x0401, KEY_POWER },
-	{ 0x0402, KEY_1 },
-	{ 0x0403, KEY_2 },
-	{ 0x0404, KEY_3 },
-	{ 0x0405, KEY_4 },
-	{ 0x0406, KEY_5 },
-	{ 0x0407, KEY_6 },
-	{ 0x0408, KEY_7 },
-	{ 0x0409, KEY_8 },
-	{ 0x040a, KEY_9 },
-	{ 0x040c, KEY_0 },
-	{ 0x040b, KEY_VIDEO },
-	{ 0x040d, KEY_REFRESH },
-	{ 0x040e, KEY_SELECT },
-	{ 0x040f, KEY_EPG },
-	{ 0x0410, KEY_UP },
-	{ 0x0414, KEY_DOWN },
-	{ 0x0411, KEY_LEFT },
-	{ 0x0413, KEY_RIGHT },
-	{ 0x0412, KEY_OK },
-	{ 0x0415, KEY_TEXT },
-	{ 0x0416, KEY_INFO },
-	{ 0x0417, KEY_RED },
-	{ 0x0418, KEY_GREEN },
-	{ 0x0419, KEY_YELLOW },
-	{ 0x041a, KEY_BLUE },
-	{ 0x041c, KEY_VOLUMEUP },
-	{ 0x041e, KEY_VOLUMEDOWN },
-	{ 0x041d, KEY_MUTE },
-	{ 0x041b, KEY_CHANNELUP },
-	{ 0x041f, KEY_CHANNELDOWN },
-	{ 0x0440, KEY_PAUSE },
-	{ 0x044c, KEY_PLAY },
-	{ 0x0458, KEY_RECORD },
-	{ 0x0454, KEY_PREVIOUS },
-	{ 0x0448, KEY_STOP },
-	{ 0x045c, KEY_NEXT }
-};
-
-/* Number of keypresses to ignore before detect repeating */
-#define RC_REPEAT_DELAY 3
-
-static int repeatable_keys[] = {
-	KEY_UP,
-	KEY_DOWN,
-	KEY_LEFT,
-	KEY_RIGHT,
-	KEY_VOLUMEUP,
-	KEY_VOLUMEDOWN,
-	KEY_CHANNELUP,
-	KEY_CHANNELDOWN
-};
-
-static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
-{
-	struct cinergyt2_state *st = d->priv;
-	u8 key[5] = {0, 0, 0, 0, 0}, cmd = CINERGYT2_EP1_GET_RC_EVENTS;
-	int i;
-
-	*state = REMOTE_NO_KEY_PRESSED;
-
-	dvb_usb_generic_rw(d, &cmd, 1, key, sizeof(key), 0);
-	if (key[4] == 0xff) {
-		/* key repeat */
-		st->rc_counter++;
-		if (st->rc_counter > RC_REPEAT_DELAY) {
-			for (i = 0; i < ARRAY_SIZE(repeatable_keys); i++) {
-				if (d->last_event == repeatable_keys[i]) {
-					*state = REMOTE_KEY_REPEAT;
-					*event = d->last_event;
-					deb_rc("repeat key, event %x\n",
-						   *event);
-					return 0;
-				}
-			}
-			deb_rc("repeated key (non repeatable)\n");
-		}
-		return 0;
-	}
-
-	/* hack to pass checksum on the custom field */
-	key[2] = ~key[1];
-	dvb_usb_nec_rc_key_to_event(d, key, event, state);
-	if (key[0] != 0) {
-		if (*event != d->last_event)
-			st->rc_counter = 0;
-
-		deb_rc("key: %x %x %x %x %x\n",
-		       key[0], key[1], key[2], key[3], key[4]);
-	}
-	return 0;
-}
-
-static int cinergyt2_usb_probe(struct usb_interface *intf,
-				const struct usb_device_id *id)
-{
-	return dvb_usb_device_init(intf, &cinergyt2_properties,
-					THIS_MODULE, NULL, adapter_nr);
-}
-
-
-static struct usb_device_id cinergyt2_usb_table[] = {
-	{ USB_DEVICE(USB_VID_TERRATEC, 0x0038) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(usb, cinergyt2_usb_table);
-
-static struct dvb_usb_device_properties cinergyt2_properties = {
-	.size_of_priv = sizeof(struct cinergyt2_state),
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = cinergyt2_streaming_ctrl,
-			.frontend_attach  = cinergyt2_frontend_attach,
-
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 5,
-				.endpoint = 0x02,
-				.u = {
-					.bulk = {
-						.buffersize = 512,
-					}
-				}
-			},
-		}},
-		}
-	},
-
-	.power_ctrl       = cinergyt2_power_ctrl,
-
-	.rc.legacy = {
-		.rc_interval      = 50,
-		.rc_map_table     = rc_map_cinergyt2_table,
-		.rc_map_size      = ARRAY_SIZE(rc_map_cinergyt2_table),
-		.rc_query         = cinergyt2_rc_query,
-	},
-
-	.generic_bulk_ctrl_endpoint = 1,
-
-	.num_device_descs = 1,
-	.devices = {
-		{ .name = "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver",
-		  .cold_ids = {NULL},
-		  .warm_ids = { &cinergyt2_usb_table[0], NULL },
-		},
-		{ NULL },
-	}
-};
-
-
-static struct usb_driver cinergyt2_driver = {
-	.name		= "cinergyT2",
-	.probe		= cinergyt2_usb_probe,
-	.disconnect	= dvb_usb_device_exit,
-	.id_table	= cinergyt2_usb_table
-};
-
-module_usb_driver(cinergyt2_driver);
-
-MODULE_DESCRIPTION("Terratec Cinergy T2 DVB-T driver");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Tomi Orava");
diff --git a/drivers/media/dvb/dvb-usb/cinergyT2-fe.c b/drivers/media/dvb/dvb-usb/cinergyT2-fe.c
deleted file mode 100644
index 1efc028..0000000
--- a/drivers/media/dvb/dvb-usb/cinergyT2-fe.c
+++ /dev/null
@@ -1,356 +0,0 @@
-/*
- * TerraTec Cinergy T2/qanu USB2 DVB-T adapter.
- *
- * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi)
- *
- * Based on the dvb-usb-framework code and the
- * original Terratec Cinergy T2 driver by:
- *
- * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and
- *                  Holger Waechtler <holger@qanu.de>
- *
- *  Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include "cinergyT2.h"
-
-
-/**
- *  convert linux-dvb frontend parameter set into TPS.
- *  See ETSI ETS-300744, section 4.6.2, table 9 for details.
- *
- *  This function is probably reusable and may better get placed in a support
- *  library.
- *
- *  We replace errornous fields by default TPS fields (the ones with value 0).
- */
-
-static uint16_t compute_tps(struct dtv_frontend_properties *op)
-{
-	uint16_t tps = 0;
-
-	switch (op->code_rate_HP) {
-	case FEC_2_3:
-		tps |= (1 << 7);
-		break;
-	case FEC_3_4:
-		tps |= (2 << 7);
-		break;
-	case FEC_5_6:
-		tps |= (3 << 7);
-		break;
-	case FEC_7_8:
-		tps |= (4 << 7);
-		break;
-	case FEC_1_2:
-	case FEC_AUTO:
-	default:
-		/* tps |= (0 << 7) */;
-	}
-
-	switch (op->code_rate_LP) {
-	case FEC_2_3:
-		tps |= (1 << 4);
-		break;
-	case FEC_3_4:
-		tps |= (2 << 4);
-		break;
-	case FEC_5_6:
-		tps |= (3 << 4);
-		break;
-	case FEC_7_8:
-		tps |= (4 << 4);
-		break;
-	case FEC_1_2:
-	case FEC_AUTO:
-	default:
-		/* tps |= (0 << 4) */;
-	}
-
-	switch (op->modulation) {
-	case QAM_16:
-		tps |= (1 << 13);
-		break;
-	case QAM_64:
-		tps |= (2 << 13);
-		break;
-	case QPSK:
-	default:
-		/* tps |= (0 << 13) */;
-	}
-
-	switch (op->transmission_mode) {
-	case TRANSMISSION_MODE_8K:
-		tps |= (1 << 0);
-		break;
-	case TRANSMISSION_MODE_2K:
-	default:
-		/* tps |= (0 << 0) */;
-	}
-
-	switch (op->guard_interval) {
-	case GUARD_INTERVAL_1_16:
-		tps |= (1 << 2);
-		break;
-	case GUARD_INTERVAL_1_8:
-		tps |= (2 << 2);
-		break;
-	case GUARD_INTERVAL_1_4:
-		tps |= (3 << 2);
-		break;
-	case GUARD_INTERVAL_1_32:
-	default:
-		/* tps |= (0 << 2) */;
-	}
-
-	switch (op->hierarchy) {
-	case HIERARCHY_1:
-		tps |= (1 << 10);
-		break;
-	case HIERARCHY_2:
-		tps |= (2 << 10);
-		break;
-	case HIERARCHY_4:
-		tps |= (3 << 10);
-		break;
-	case HIERARCHY_NONE:
-	default:
-		/* tps |= (0 << 10) */;
-	}
-
-	return tps;
-}
-
-struct cinergyt2_fe_state {
-	struct dvb_frontend fe;
-	struct dvb_usb_device *d;
-};
-
-static int cinergyt2_fe_read_status(struct dvb_frontend *fe,
-					fe_status_t *status)
-{
-	struct cinergyt2_fe_state *state = fe->demodulator_priv;
-	struct dvbt_get_status_msg result;
-	u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
-	int ret;
-
-	ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&result,
-			sizeof(result), 0);
-	if (ret < 0)
-		return ret;
-
-	*status = 0;
-
-	if (0xffff - le16_to_cpu(result.gain) > 30)
-		*status |= FE_HAS_SIGNAL;
-	if (result.lock_bits & (1 << 6))
-		*status |= FE_HAS_LOCK;
-	if (result.lock_bits & (1 << 5))
-		*status |= FE_HAS_SYNC;
-	if (result.lock_bits & (1 << 4))
-		*status |= FE_HAS_CARRIER;
-	if (result.lock_bits & (1 << 1))
-		*status |= FE_HAS_VITERBI;
-
-	if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) !=
-			(FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC))
-		*status &= ~FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int cinergyt2_fe_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct cinergyt2_fe_state *state = fe->demodulator_priv;
-	struct dvbt_get_status_msg status;
-	char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
-	int ret;
-
-	ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status,
-				sizeof(status), 0);
-	if (ret < 0)
-		return ret;
-
-	*ber = le32_to_cpu(status.viterbi_error_rate);
-	return 0;
-}
-
-static int cinergyt2_fe_read_unc_blocks(struct dvb_frontend *fe, u32 *unc)
-{
-	struct cinergyt2_fe_state *state = fe->demodulator_priv;
-	struct dvbt_get_status_msg status;
-	u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
-	int ret;
-
-	ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&status,
-				sizeof(status), 0);
-	if (ret < 0) {
-		err("cinergyt2_fe_read_unc_blocks() Failed! (Error=%d)\n",
-			ret);
-		return ret;
-	}
-	*unc = le32_to_cpu(status.uncorrected_block_count);
-	return 0;
-}
-
-static int cinergyt2_fe_read_signal_strength(struct dvb_frontend *fe,
-						u16 *strength)
-{
-	struct cinergyt2_fe_state *state = fe->demodulator_priv;
-	struct dvbt_get_status_msg status;
-	char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
-	int ret;
-
-	ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status,
-				sizeof(status), 0);
-	if (ret < 0) {
-		err("cinergyt2_fe_read_signal_strength() Failed!"
-			" (Error=%d)\n", ret);
-		return ret;
-	}
-	*strength = (0xffff - le16_to_cpu(status.gain));
-	return 0;
-}
-
-static int cinergyt2_fe_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct cinergyt2_fe_state *state = fe->demodulator_priv;
-	struct dvbt_get_status_msg status;
-	char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
-	int ret;
-
-	ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status,
-				sizeof(status), 0);
-	if (ret < 0) {
-		err("cinergyt2_fe_read_snr() Failed! (Error=%d)\n", ret);
-		return ret;
-	}
-	*snr = (status.snr << 8) | status.snr;
-	return 0;
-}
-
-static int cinergyt2_fe_init(struct dvb_frontend *fe)
-{
-	return 0;
-}
-
-static int cinergyt2_fe_sleep(struct dvb_frontend *fe)
-{
-	deb_info("cinergyt2_fe_sleep() Called\n");
-	return 0;
-}
-
-static int cinergyt2_fe_get_tune_settings(struct dvb_frontend *fe,
-				struct dvb_frontend_tune_settings *tune)
-{
-	tune->min_delay_ms = 800;
-	return 0;
-}
-
-static int cinergyt2_fe_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
-	struct cinergyt2_fe_state *state = fe->demodulator_priv;
-	struct dvbt_set_parameters_msg param;
-	char result[2];
-	int err;
-
-	param.cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS;
-	param.tps = cpu_to_le16(compute_tps(fep));
-	param.freq = cpu_to_le32(fep->frequency / 1000);
-	param.flags = 0;
-
-	switch (fep->bandwidth_hz) {
-	default:
-	case 8000000:
-		param.bandwidth = 8;
-		break;
-	case 7000000:
-		param.bandwidth = 7;
-		break;
-	case 6000000:
-		param.bandwidth = 6;
-		break;
-	}
-
-	err = dvb_usb_generic_rw(state->d,
-			(char *)&param, sizeof(param),
-			result, sizeof(result), 0);
-	if (err < 0)
-		err("cinergyt2_fe_set_frontend() Failed! err=%d\n", err);
-
-	return (err < 0) ? err : 0;
-}
-
-static void cinergyt2_fe_release(struct dvb_frontend *fe)
-{
-	struct cinergyt2_fe_state *state = fe->demodulator_priv;
-	if (state != NULL)
-		kfree(state);
-}
-
-static struct dvb_frontend_ops cinergyt2_fe_ops;
-
-struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d)
-{
-	struct cinergyt2_fe_state *s = kzalloc(sizeof(
-					struct cinergyt2_fe_state), GFP_KERNEL);
-	if (s == NULL)
-		return NULL;
-
-	s->d = d;
-	memcpy(&s->fe.ops, &cinergyt2_fe_ops, sizeof(struct dvb_frontend_ops));
-	s->fe.demodulator_priv = s;
-	return &s->fe;
-}
-
-
-static struct dvb_frontend_ops cinergyt2_fe_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name			= DRIVER_NAME,
-		.frequency_min		= 174000000,
-		.frequency_max		= 862000000,
-		.frequency_stepsize	= 166667,
-		.caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_1_2
-			| FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4
-			| FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8
-			| FE_CAN_FEC_AUTO | FE_CAN_QPSK
-			| FE_CAN_QAM_16 | FE_CAN_QAM_64
-			| FE_CAN_QAM_AUTO
-			| FE_CAN_TRANSMISSION_MODE_AUTO
-			| FE_CAN_GUARD_INTERVAL_AUTO
-			| FE_CAN_HIERARCHY_AUTO
-			| FE_CAN_RECOVER
-			| FE_CAN_MUTE_TS
-	},
-
-	.release		= cinergyt2_fe_release,
-
-	.init			= cinergyt2_fe_init,
-	.sleep			= cinergyt2_fe_sleep,
-
-	.set_frontend		= cinergyt2_fe_set_frontend,
-	.get_tune_settings	= cinergyt2_fe_get_tune_settings,
-
-	.read_status		= cinergyt2_fe_read_status,
-	.read_ber		= cinergyt2_fe_read_ber,
-	.read_signal_strength	= cinergyt2_fe_read_signal_strength,
-	.read_snr		= cinergyt2_fe_read_snr,
-	.read_ucblocks		= cinergyt2_fe_read_unc_blocks,
-};
diff --git a/drivers/media/dvb/dvb-usb/cinergyT2.h b/drivers/media/dvb/dvb-usb/cinergyT2.h
deleted file mode 100644
index 84efe03..0000000
--- a/drivers/media/dvb/dvb-usb/cinergyT2.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * TerraTec Cinergy T2/qanu USB2 DVB-T adapter.
- *
- * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi)
- *
- * Based on the dvb-usb-framework code and the
- * original Terratec Cinergy T2 driver by:
- *
- * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and
- *                  Holger Waechtler <holger@qanu.de>
- *
- *  Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License,  or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not,  write to the Free Software
- * Foundation,  Inc.,  675 Mass Ave,  Cambridge,  MA 02139,  USA.
- *
- */
-
-#ifndef _DVB_USB_CINERGYT2_H_
-#define _DVB_USB_CINERGYT2_H_
-
-#include <linux/usb/input.h>
-
-#define DVB_USB_LOG_PREFIX "cinergyT2"
-#include "dvb-usb.h"
-
-#define DRIVER_NAME "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver"
-
-extern int dvb_usb_cinergyt2_debug;
-
-#define deb_info(args...)  dprintk(dvb_usb_cinergyt2_debug,  0x001, args)
-#define deb_xfer(args...)  dprintk(dvb_usb_cinergyt2_debug,  0x002, args)
-#define deb_pll(args...)   dprintk(dvb_usb_cinergyt2_debug,  0x004, args)
-#define deb_ts(args...)    dprintk(dvb_usb_cinergyt2_debug,  0x008, args)
-#define deb_err(args...)   dprintk(dvb_usb_cinergyt2_debug,  0x010, args)
-#define deb_rc(args...)    dprintk(dvb_usb_cinergyt2_debug,  0x020, args)
-#define deb_fw(args...)    dprintk(dvb_usb_cinergyt2_debug,  0x040, args)
-#define deb_mem(args...)   dprintk(dvb_usb_cinergyt2_debug,  0x080, args)
-#define deb_uxfer(args...) dprintk(dvb_usb_cinergyt2_debug,  0x100, args)
-
-
-
-enum cinergyt2_ep1_cmd {
-	CINERGYT2_EP1_PID_TABLE_RESET		= 0x01,
-	CINERGYT2_EP1_PID_SETUP			= 0x02,
-	CINERGYT2_EP1_CONTROL_STREAM_TRANSFER	= 0x03,
-	CINERGYT2_EP1_SET_TUNER_PARAMETERS	= 0x04,
-	CINERGYT2_EP1_GET_TUNER_STATUS		= 0x05,
-	CINERGYT2_EP1_START_SCAN		= 0x06,
-	CINERGYT2_EP1_CONTINUE_SCAN		= 0x07,
-	CINERGYT2_EP1_GET_RC_EVENTS		= 0x08,
-	CINERGYT2_EP1_SLEEP_MODE		= 0x09,
-	CINERGYT2_EP1_GET_FIRMWARE_VERSION	= 0x0A
-};
-
-
-struct dvbt_get_status_msg {
-	uint32_t freq;
-	uint8_t bandwidth;
-	uint16_t tps;
-	uint8_t flags;
-	__le16 gain;
-	uint8_t snr;
-	__le32 viterbi_error_rate;
-	uint32_t rs_error_rate;
-	__le32 uncorrected_block_count;
-	uint8_t lock_bits;
-	uint8_t prev_lock_bits;
-} __attribute__((packed));
-
-
-struct dvbt_set_parameters_msg {
-	uint8_t cmd;
-	__le32 freq;
-	uint8_t bandwidth;
-	__le16 tps;
-	uint8_t flags;
-} __attribute__((packed));
-
-
-extern struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d);
-
-#endif /* _DVB_USB_CINERGYT2_H_ */
-
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
deleted file mode 100644
index 3940bb0..0000000
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ /dev/null
@@ -1,2043 +0,0 @@
-/* DVB USB compliant linux driver for Conexant USB reference design.
- *
- * The Conexant reference design I saw on their website was only for analogue
- * capturing (using the cx25842). The box I took to write this driver (reverse
- * engineered) is the one labeled Medion MD95700. In addition to the cx25842
- * for analogue capturing it also has a cx22702 DVB-T demodulator on the main
- * board. Besides it has a atiremote (X10) and a USB2.0 hub onboard.
- *
- * Maybe it is a little bit premature to call this driver cxusb, but I assume
- * the USB protocol is identical or at least inherited from the reference
- * design, so it can be reused for the "analogue-only" device (if it will
- * appear at all).
- *
- * TODO: Use the cx25840-driver for the analogue part
- *
- * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de)
- * Copyright (C) 2006 Michael Krufky (mkrufky@linuxtv.org)
- * Copyright (C) 2006, 2007 Chris Pascoe (c.pascoe@itee.uq.edu.au)
- *
- *   This program is free software; you can redistribute it and/or modify it
- *   under the terms of the GNU General Public License as published by the Free
- *   Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include <media/tuner.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-
-#include "cxusb.h"
-
-#include "cx22702.h"
-#include "lgdt330x.h"
-#include "mt352.h"
-#include "mt352_priv.h"
-#include "zl10353.h"
-#include "tuner-xc2028.h"
-#include "tuner-simple.h"
-#include "mxl5005s.h"
-#include "max2165.h"
-#include "dib7000p.h"
-#include "dib0070.h"
-#include "lgs8gxx.h"
-#include "atbm8830.h"
-
-/* debug */
-static int dvb_usb_cxusb_debug;
-module_param_named(debug, dvb_usb_cxusb_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS);
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-#define deb_info(args...)   dprintk(dvb_usb_cxusb_debug, 0x03, args)
-#define deb_i2c(args...)    dprintk(dvb_usb_cxusb_debug, 0x02, args)
-
-static int cxusb_ctrl_msg(struct dvb_usb_device *d,
-			  u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen)
-{
-	int wo = (rbuf == NULL || rlen == 0); /* write-only */
-	u8 sndbuf[1+wlen];
-	memset(sndbuf, 0, 1+wlen);
-
-	sndbuf[0] = cmd;
-	memcpy(&sndbuf[1], wbuf, wlen);
-	if (wo)
-		return dvb_usb_generic_write(d, sndbuf, 1+wlen);
-	else
-		return dvb_usb_generic_rw(d, sndbuf, 1+wlen, rbuf, rlen, 0);
-}
-
-/* GPIO */
-static void cxusb_gpio_tuner(struct dvb_usb_device *d, int onoff)
-{
-	struct cxusb_state *st = d->priv;
-	u8 o[2], i;
-
-	if (st->gpio_write_state[GPIO_TUNER] == onoff)
-		return;
-
-	o[0] = GPIO_TUNER;
-	o[1] = onoff;
-	cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1);
-
-	if (i != 0x01)
-		deb_info("gpio_write failed.\n");
-
-	st->gpio_write_state[GPIO_TUNER] = onoff;
-}
-
-static int cxusb_bluebird_gpio_rw(struct dvb_usb_device *d, u8 changemask,
-				 u8 newval)
-{
-	u8 o[2], gpio_state;
-	int rc;
-
-	o[0] = 0xff & ~changemask;	/* mask of bits to keep */
-	o[1] = newval & changemask;	/* new values for bits  */
-
-	rc = cxusb_ctrl_msg(d, CMD_BLUEBIRD_GPIO_RW, o, 2, &gpio_state, 1);
-	if (rc < 0 || (gpio_state & changemask) != (newval & changemask))
-		deb_info("bluebird_gpio_write failed.\n");
-
-	return rc < 0 ? rc : gpio_state;
-}
-
-static void cxusb_bluebird_gpio_pulse(struct dvb_usb_device *d, u8 pin, int low)
-{
-	cxusb_bluebird_gpio_rw(d, pin, low ? 0 : pin);
-	msleep(5);
-	cxusb_bluebird_gpio_rw(d, pin, low ? pin : 0);
-}
-
-static void cxusb_nano2_led(struct dvb_usb_device *d, int onoff)
-{
-	cxusb_bluebird_gpio_rw(d, 0x40, onoff ? 0 : 0x40);
-}
-
-static int cxusb_d680_dmb_gpio_tuner(struct dvb_usb_device *d,
-		u8 addr, int onoff)
-{
-	u8  o[2] = {addr, onoff};
-	u8  i;
-	int rc;
-
-	rc = cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1);
-
-	if (rc < 0)
-		return rc;
-	if (i == 0x01)
-		return 0;
-	else {
-		deb_info("gpio_write failed.\n");
-		return -EIO;
-	}
-}
-
-/* I2C */
-static int cxusb_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
-			  int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	int i;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	for (i = 0; i < num; i++) {
-
-		if (d->udev->descriptor.idVendor == USB_VID_MEDION)
-			switch (msg[i].addr) {
-			case 0x63:
-				cxusb_gpio_tuner(d, 0);
-				break;
-			default:
-				cxusb_gpio_tuner(d, 1);
-				break;
-			}
-
-		if (msg[i].flags & I2C_M_RD) {
-			/* read only */
-			u8 obuf[3], ibuf[1+msg[i].len];
-			obuf[0] = 0;
-			obuf[1] = msg[i].len;
-			obuf[2] = msg[i].addr;
-			if (cxusb_ctrl_msg(d, CMD_I2C_READ,
-					   obuf, 3,
-					   ibuf, 1+msg[i].len) < 0) {
-				warn("i2c read failed");
-				break;
-			}
-			memcpy(msg[i].buf, &ibuf[1], msg[i].len);
-		} else if (i+1 < num && (msg[i+1].flags & I2C_M_RD) &&
-			   msg[i].addr == msg[i+1].addr) {
-			/* write to then read from same address */
-			u8 obuf[3+msg[i].len], ibuf[1+msg[i+1].len];
-			obuf[0] = msg[i].len;
-			obuf[1] = msg[i+1].len;
-			obuf[2] = msg[i].addr;
-			memcpy(&obuf[3], msg[i].buf, msg[i].len);
-
-			if (cxusb_ctrl_msg(d, CMD_I2C_READ,
-					   obuf, 3+msg[i].len,
-					   ibuf, 1+msg[i+1].len) < 0)
-				break;
-
-			if (ibuf[0] != 0x08)
-				deb_i2c("i2c read may have failed\n");
-
-			memcpy(msg[i+1].buf, &ibuf[1], msg[i+1].len);
-
-			i++;
-		} else {
-			/* write only */
-			u8 obuf[2+msg[i].len], ibuf;
-			obuf[0] = msg[i].addr;
-			obuf[1] = msg[i].len;
-			memcpy(&obuf[2], msg[i].buf, msg[i].len);
-
-			if (cxusb_ctrl_msg(d, CMD_I2C_WRITE, obuf,
-					   2+msg[i].len, &ibuf,1) < 0)
-				break;
-			if (ibuf != 0x08)
-				deb_i2c("i2c write may have failed\n");
-		}
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-	return i == num ? num : -EREMOTEIO;
-}
-
-static u32 cxusb_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm cxusb_i2c_algo = {
-	.master_xfer   = cxusb_i2c_xfer,
-	.functionality = cxusb_i2c_func,
-};
-
-static int cxusb_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	u8 b = 0;
-	if (onoff)
-		return cxusb_ctrl_msg(d, CMD_POWER_ON, &b, 1, NULL, 0);
-	else
-		return cxusb_ctrl_msg(d, CMD_POWER_OFF, &b, 1, NULL, 0);
-}
-
-static int cxusb_aver_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	int ret;
-	if (!onoff)
-		return cxusb_ctrl_msg(d, CMD_POWER_OFF, NULL, 0, NULL, 0);
-	if (d->state == DVB_USB_STATE_INIT &&
-	    usb_set_interface(d->udev, 0, 0) < 0)
-		err("set interface failed");
-	do {} while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) &&
-		   !(ret = cxusb_ctrl_msg(d, 0x15, NULL, 0, NULL, 0)) &&
-		   !(ret = cxusb_ctrl_msg(d, 0x17, NULL, 0, NULL, 0)) && 0);
-	if (!ret) {
-		/* FIXME: We don't know why, but we need to configure the
-		 * lgdt3303 with the register settings below on resume */
-		int i;
-		u8 buf, bufs[] = {
-			0x0e, 0x2, 0x00, 0x7f,
-			0x0e, 0x2, 0x02, 0xfe,
-			0x0e, 0x2, 0x02, 0x01,
-			0x0e, 0x2, 0x00, 0x03,
-			0x0e, 0x2, 0x0d, 0x40,
-			0x0e, 0x2, 0x0e, 0x87,
-			0x0e, 0x2, 0x0f, 0x8e,
-			0x0e, 0x2, 0x10, 0x01,
-			0x0e, 0x2, 0x14, 0xd7,
-			0x0e, 0x2, 0x47, 0x88,
-		};
-		msleep(20);
-		for (i = 0; i < sizeof(bufs)/sizeof(u8); i += 4/sizeof(u8)) {
-			ret = cxusb_ctrl_msg(d, CMD_I2C_WRITE,
-					     bufs+i, 4, &buf, 1);
-			if (ret)
-				break;
-			if (buf != 0x8)
-				return -EREMOTEIO;
-		}
-	}
-	return ret;
-}
-
-static int cxusb_bluebird_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	u8 b = 0;
-	if (onoff)
-		return cxusb_ctrl_msg(d, CMD_POWER_ON, &b, 1, NULL, 0);
-	else
-		return 0;
-}
-
-static int cxusb_nano2_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	int rc = 0;
-
-	rc = cxusb_power_ctrl(d, onoff);
-	if (!onoff)
-		cxusb_nano2_led(d, 0);
-
-	return rc;
-}
-
-static int cxusb_d680_dmb_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	int ret;
-	u8  b;
-	ret = cxusb_power_ctrl(d, onoff);
-	if (!onoff)
-		return ret;
-
-	msleep(128);
-	cxusb_ctrl_msg(d, CMD_DIGITAL, NULL, 0, &b, 1);
-	msleep(100);
-	return ret;
-}
-
-static int cxusb_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	u8 buf[2] = { 0x03, 0x00 };
-	if (onoff)
-		cxusb_ctrl_msg(adap->dev, CMD_STREAMING_ON, buf, 2, NULL, 0);
-	else
-		cxusb_ctrl_msg(adap->dev, CMD_STREAMING_OFF, NULL, 0, NULL, 0);
-
-	return 0;
-}
-
-static int cxusb_aver_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	if (onoff)
-		cxusb_ctrl_msg(adap->dev, CMD_AVER_STREAM_ON, NULL, 0, NULL, 0);
-	else
-		cxusb_ctrl_msg(adap->dev, CMD_AVER_STREAM_OFF,
-			       NULL, 0, NULL, 0);
-	return 0;
-}
-
-static void cxusb_d680_dmb_drain_message(struct dvb_usb_device *d)
-{
-	int       ep = d->props.generic_bulk_ctrl_endpoint;
-	const int timeout = 100;
-	const int junk_len = 32;
-	u8        *junk;
-	int       rd_count;
-
-	/* Discard remaining data in video pipe */
-	junk = kmalloc(junk_len, GFP_KERNEL);
-	if (!junk)
-		return;
-	while (1) {
-		if (usb_bulk_msg(d->udev,
-			usb_rcvbulkpipe(d->udev, ep),
-			junk, junk_len, &rd_count, timeout) < 0)
-			break;
-		if (!rd_count)
-			break;
-	}
-	kfree(junk);
-}
-
-static void cxusb_d680_dmb_drain_video(struct dvb_usb_device *d)
-{
-	struct usb_data_stream_properties *p = &d->props.adapter[0].fe[0].stream;
-	const int timeout = 100;
-	const int junk_len = p->u.bulk.buffersize;
-	u8        *junk;
-	int       rd_count;
-
-	/* Discard remaining data in video pipe */
-	junk = kmalloc(junk_len, GFP_KERNEL);
-	if (!junk)
-		return;
-	while (1) {
-		if (usb_bulk_msg(d->udev,
-			usb_rcvbulkpipe(d->udev, p->endpoint),
-			junk, junk_len, &rd_count, timeout) < 0)
-			break;
-		if (!rd_count)
-			break;
-	}
-	kfree(junk);
-}
-
-static int cxusb_d680_dmb_streaming_ctrl(
-		struct dvb_usb_adapter *adap, int onoff)
-{
-	if (onoff) {
-		u8 buf[2] = { 0x03, 0x00 };
-		cxusb_d680_dmb_drain_video(adap->dev);
-		return cxusb_ctrl_msg(adap->dev, CMD_STREAMING_ON,
-			buf, sizeof(buf), NULL, 0);
-	} else {
-		int ret = cxusb_ctrl_msg(adap->dev,
-			CMD_STREAMING_OFF, NULL, 0, NULL, 0);
-		return ret;
-	}
-}
-
-static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
-{
-	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
-	u8 ircode[4];
-	int i;
-
-	cxusb_ctrl_msg(d, CMD_GET_IR_CODE, NULL, 0, ircode, 4);
-
-	*event = 0;
-	*state = REMOTE_NO_KEY_PRESSED;
-
-	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
-		if (rc5_custom(&keymap[i]) == ircode[2] &&
-		    rc5_data(&keymap[i]) == ircode[3]) {
-			*event = keymap[i].keycode;
-			*state = REMOTE_KEY_PRESSED;
-
-			return 0;
-		}
-	}
-
-	return 0;
-}
-
-static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d, u32 *event,
-				    int *state)
-{
-	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
-	u8 ircode[4];
-	int i;
-	struct i2c_msg msg = { .addr = 0x6b, .flags = I2C_M_RD,
-			       .buf = ircode, .len = 4 };
-
-	*event = 0;
-	*state = REMOTE_NO_KEY_PRESSED;
-
-	if (cxusb_i2c_xfer(&d->i2c_adap, &msg, 1) != 1)
-		return 0;
-
-	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
-		if (rc5_custom(&keymap[i]) == ircode[1] &&
-		    rc5_data(&keymap[i]) == ircode[2]) {
-			*event = keymap[i].keycode;
-			*state = REMOTE_KEY_PRESSED;
-
-			return 0;
-		}
-	}
-
-	return 0;
-}
-
-static int cxusb_d680_dmb_rc_query(struct dvb_usb_device *d, u32 *event,
-		int *state)
-{
-	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
-	u8 ircode[2];
-	int i;
-
-	*event = 0;
-	*state = REMOTE_NO_KEY_PRESSED;
-
-	if (cxusb_ctrl_msg(d, 0x10, NULL, 0, ircode, 2) < 0)
-		return 0;
-
-	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
-		if (rc5_custom(&keymap[i]) == ircode[0] &&
-		    rc5_data(&keymap[i]) == ircode[1]) {
-			*event = keymap[i].keycode;
-			*state = REMOTE_KEY_PRESSED;
-
-			return 0;
-		}
-	}
-
-	return 0;
-}
-
-static struct rc_map_table rc_map_dvico_mce_table[] = {
-	{ 0xfe02, KEY_TV },
-	{ 0xfe0e, KEY_MP3 },
-	{ 0xfe1a, KEY_DVD },
-	{ 0xfe1e, KEY_FAVORITES },
-	{ 0xfe16, KEY_SETUP },
-	{ 0xfe46, KEY_POWER2 },
-	{ 0xfe0a, KEY_EPG },
-	{ 0xfe49, KEY_BACK },
-	{ 0xfe4d, KEY_MENU },
-	{ 0xfe51, KEY_UP },
-	{ 0xfe5b, KEY_LEFT },
-	{ 0xfe5f, KEY_RIGHT },
-	{ 0xfe53, KEY_DOWN },
-	{ 0xfe5e, KEY_OK },
-	{ 0xfe59, KEY_INFO },
-	{ 0xfe55, KEY_TAB },
-	{ 0xfe0f, KEY_PREVIOUSSONG },/* Replay */
-	{ 0xfe12, KEY_NEXTSONG },	/* Skip */
-	{ 0xfe42, KEY_ENTER	 },	/* Windows/Start */
-	{ 0xfe15, KEY_VOLUMEUP },
-	{ 0xfe05, KEY_VOLUMEDOWN },
-	{ 0xfe11, KEY_CHANNELUP },
-	{ 0xfe09, KEY_CHANNELDOWN },
-	{ 0xfe52, KEY_CAMERA },
-	{ 0xfe5a, KEY_TUNER },	/* Live */
-	{ 0xfe19, KEY_OPEN },
-	{ 0xfe0b, KEY_1 },
-	{ 0xfe17, KEY_2 },
-	{ 0xfe1b, KEY_3 },
-	{ 0xfe07, KEY_4 },
-	{ 0xfe50, KEY_5 },
-	{ 0xfe54, KEY_6 },
-	{ 0xfe48, KEY_7 },
-	{ 0xfe4c, KEY_8 },
-	{ 0xfe58, KEY_9 },
-	{ 0xfe13, KEY_ANGLE },	/* Aspect */
-	{ 0xfe03, KEY_0 },
-	{ 0xfe1f, KEY_ZOOM },
-	{ 0xfe43, KEY_REWIND },
-	{ 0xfe47, KEY_PLAYPAUSE },
-	{ 0xfe4f, KEY_FASTFORWARD },
-	{ 0xfe57, KEY_MUTE },
-	{ 0xfe0d, KEY_STOP },
-	{ 0xfe01, KEY_RECORD },
-	{ 0xfe4e, KEY_POWER },
-};
-
-static struct rc_map_table rc_map_dvico_portable_table[] = {
-	{ 0xfc02, KEY_SETUP },       /* Profile */
-	{ 0xfc43, KEY_POWER2 },
-	{ 0xfc06, KEY_EPG },
-	{ 0xfc5a, KEY_BACK },
-	{ 0xfc05, KEY_MENU },
-	{ 0xfc47, KEY_INFO },
-	{ 0xfc01, KEY_TAB },
-	{ 0xfc42, KEY_PREVIOUSSONG },/* Replay */
-	{ 0xfc49, KEY_VOLUMEUP },
-	{ 0xfc09, KEY_VOLUMEDOWN },
-	{ 0xfc54, KEY_CHANNELUP },
-	{ 0xfc0b, KEY_CHANNELDOWN },
-	{ 0xfc16, KEY_CAMERA },
-	{ 0xfc40, KEY_TUNER },	/* ATV/DTV */
-	{ 0xfc45, KEY_OPEN },
-	{ 0xfc19, KEY_1 },
-	{ 0xfc18, KEY_2 },
-	{ 0xfc1b, KEY_3 },
-	{ 0xfc1a, KEY_4 },
-	{ 0xfc58, KEY_5 },
-	{ 0xfc59, KEY_6 },
-	{ 0xfc15, KEY_7 },
-	{ 0xfc14, KEY_8 },
-	{ 0xfc17, KEY_9 },
-	{ 0xfc44, KEY_ANGLE },	/* Aspect */
-	{ 0xfc55, KEY_0 },
-	{ 0xfc07, KEY_ZOOM },
-	{ 0xfc0a, KEY_REWIND },
-	{ 0xfc08, KEY_PLAYPAUSE },
-	{ 0xfc4b, KEY_FASTFORWARD },
-	{ 0xfc5b, KEY_MUTE },
-	{ 0xfc04, KEY_STOP },
-	{ 0xfc56, KEY_RECORD },
-	{ 0xfc57, KEY_POWER },
-	{ 0xfc41, KEY_UNKNOWN },    /* INPUT */
-	{ 0xfc00, KEY_UNKNOWN },    /* HD */
-};
-
-static struct rc_map_table rc_map_d680_dmb_table[] = {
-	{ 0x0038, KEY_UNKNOWN },	/* TV/AV */
-	{ 0x080c, KEY_ZOOM },
-	{ 0x0800, KEY_0 },
-	{ 0x0001, KEY_1 },
-	{ 0x0802, KEY_2 },
-	{ 0x0003, KEY_3 },
-	{ 0x0804, KEY_4 },
-	{ 0x0005, KEY_5 },
-	{ 0x0806, KEY_6 },
-	{ 0x0007, KEY_7 },
-	{ 0x0808, KEY_8 },
-	{ 0x0009, KEY_9 },
-	{ 0x000a, KEY_MUTE },
-	{ 0x0829, KEY_BACK },
-	{ 0x0012, KEY_CHANNELUP },
-	{ 0x0813, KEY_CHANNELDOWN },
-	{ 0x002b, KEY_VOLUMEUP },
-	{ 0x082c, KEY_VOLUMEDOWN },
-	{ 0x0020, KEY_UP },
-	{ 0x0821, KEY_DOWN },
-	{ 0x0011, KEY_LEFT },
-	{ 0x0810, KEY_RIGHT },
-	{ 0x000d, KEY_OK },
-	{ 0x081f, KEY_RECORD },
-	{ 0x0017, KEY_PLAYPAUSE },
-	{ 0x0816, KEY_PLAYPAUSE },
-	{ 0x000b, KEY_STOP },
-	{ 0x0827, KEY_FASTFORWARD },
-	{ 0x0026, KEY_REWIND },
-	{ 0x081e, KEY_UNKNOWN },    /* Time Shift */
-	{ 0x000e, KEY_UNKNOWN },    /* Snapshot */
-	{ 0x082d, KEY_UNKNOWN },    /* Mouse Cursor */
-	{ 0x000f, KEY_UNKNOWN },    /* Minimize/Maximize */
-	{ 0x0814, KEY_UNKNOWN },    /* Shuffle */
-	{ 0x0025, KEY_POWER },
-};
-
-static int cxusb_dee1601_demod_init(struct dvb_frontend* fe)
-{
-	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x28 };
-	static u8 reset []         = { RESET,      0x80 };
-	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 };
-	static u8 agc_cfg []       = { AGC_TARGET, 0x28, 0x20 };
-	static u8 gpp_ctl_cfg []   = { GPP_CTL,    0x33 };
-	static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
-
-	mt352_write(fe, clock_config,   sizeof(clock_config));
-	udelay(200);
-	mt352_write(fe, reset,          sizeof(reset));
-	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
-
-	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
-	mt352_write(fe, gpp_ctl_cfg,    sizeof(gpp_ctl_cfg));
-	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
-
-	return 0;
-}
-
-static int cxusb_mt352_demod_init(struct dvb_frontend* fe)
-{	/* used in both lgz201 and th7579 */
-	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x29 };
-	static u8 reset []         = { RESET,      0x80 };
-	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 };
-	static u8 agc_cfg []       = { AGC_TARGET, 0x24, 0x20 };
-	static u8 gpp_ctl_cfg []   = { GPP_CTL,    0x33 };
-	static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
-
-	mt352_write(fe, clock_config,   sizeof(clock_config));
-	udelay(200);
-	mt352_write(fe, reset,          sizeof(reset));
-	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
-
-	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
-	mt352_write(fe, gpp_ctl_cfg,    sizeof(gpp_ctl_cfg));
-	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
-	return 0;
-}
-
-static struct cx22702_config cxusb_cx22702_config = {
-	.demod_address = 0x63,
-	.output_mode = CX22702_PARALLEL_OUTPUT,
-};
-
-static struct lgdt330x_config cxusb_lgdt3303_config = {
-	.demod_address = 0x0e,
-	.demod_chip    = LGDT3303,
-};
-
-static struct lgdt330x_config cxusb_aver_lgdt3303_config = {
-	.demod_address       = 0x0e,
-	.demod_chip          = LGDT3303,
-	.clock_polarity_flip = 2,
-};
-
-static struct mt352_config cxusb_dee1601_config = {
-	.demod_address = 0x0f,
-	.demod_init    = cxusb_dee1601_demod_init,
-};
-
-static struct zl10353_config cxusb_zl10353_dee1601_config = {
-	.demod_address = 0x0f,
-	.parallel_ts = 1,
-};
-
-static struct mt352_config cxusb_mt352_config = {
-	/* used in both lgz201 and th7579 */
-	.demod_address = 0x0f,
-	.demod_init    = cxusb_mt352_demod_init,
-};
-
-static struct zl10353_config cxusb_zl10353_xc3028_config = {
-	.demod_address = 0x0f,
-	.if2 = 45600,
-	.no_tuner = 1,
-	.parallel_ts = 1,
-};
-
-static struct zl10353_config cxusb_zl10353_xc3028_config_no_i2c_gate = {
-	.demod_address = 0x0f,
-	.if2 = 45600,
-	.no_tuner = 1,
-	.parallel_ts = 1,
-	.disable_i2c_gate_ctrl = 1,
-};
-
-static struct mt352_config cxusb_mt352_xc3028_config = {
-	.demod_address = 0x0f,
-	.if2 = 4560,
-	.no_tuner = 1,
-	.demod_init = cxusb_mt352_demod_init,
-};
-
-/* FIXME: needs tweaking */
-static struct mxl5005s_config aver_a868r_tuner = {
-	.i2c_address     = 0x63,
-	.if_freq         = 6000000UL,
-	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
-	.agc_mode        = MXL_SINGLE_AGC,
-	.tracking_filter = MXL_TF_C,
-	.rssi_enable     = MXL_RSSI_ENABLE,
-	.cap_select      = MXL_CAP_SEL_ENABLE,
-	.div_out         = MXL_DIV_OUT_4,
-	.clock_out       = MXL_CLOCK_OUT_DISABLE,
-	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
-	.top		 = MXL5005S_TOP_25P2,
-	.mod_mode        = MXL_DIGITAL_MODE,
-	.if_mode         = MXL_ZERO_IF,
-	.AgcMasterByte   = 0x00,
-};
-
-/* FIXME: needs tweaking */
-static struct mxl5005s_config d680_dmb_tuner = {
-	.i2c_address     = 0x63,
-	.if_freq         = 36125000UL,
-	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
-	.agc_mode        = MXL_SINGLE_AGC,
-	.tracking_filter = MXL_TF_C,
-	.rssi_enable     = MXL_RSSI_ENABLE,
-	.cap_select      = MXL_CAP_SEL_ENABLE,
-	.div_out         = MXL_DIV_OUT_4,
-	.clock_out       = MXL_CLOCK_OUT_DISABLE,
-	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
-	.top		 = MXL5005S_TOP_25P2,
-	.mod_mode        = MXL_DIGITAL_MODE,
-	.if_mode         = MXL_ZERO_IF,
-	.AgcMasterByte   = 0x00,
-};
-
-static struct max2165_config mygica_d689_max2165_cfg = {
-	.i2c_address = 0x60,
-	.osc_clk = 20
-};
-
-/* Callbacks for DVB USB */
-static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	dvb_attach(simple_tuner_attach, adap->fe_adap[0].fe,
-		   &adap->dev->i2c_adap, 0x61,
-		   TUNER_PHILIPS_FMD1216ME_MK3);
-	return 0;
-}
-
-static int cxusb_dee1601_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61,
-		   NULL, DVB_PLL_THOMSON_DTT7579);
-	return 0;
-}
-
-static int cxusb_lgz201_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61, NULL, DVB_PLL_LG_Z201);
-	return 0;
-}
-
-static int cxusb_dtt7579_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60,
-		   NULL, DVB_PLL_THOMSON_DTT7579);
-	return 0;
-}
-
-static int cxusb_lgh064f_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	dvb_attach(simple_tuner_attach, adap->fe_adap[0].fe,
-		   &adap->dev->i2c_adap, 0x61, TUNER_LG_TDVS_H06XF);
-	return 0;
-}
-
-static int dvico_bluebird_xc2028_callback(void *ptr, int component,
-					  int command, int arg)
-{
-	struct dvb_usb_adapter *adap = ptr;
-	struct dvb_usb_device *d = adap->dev;
-
-	switch (command) {
-	case XC2028_TUNER_RESET:
-		deb_info("%s: XC2028_TUNER_RESET %d\n", __func__, arg);
-		cxusb_bluebird_gpio_pulse(d, 0x01, 1);
-		break;
-	case XC2028_RESET_CLK:
-		deb_info("%s: XC2028_RESET_CLK %d\n", __func__, arg);
-		break;
-	default:
-		deb_info("%s: unknown command %d, arg %d\n", __func__,
-			 command, arg);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct dvb_frontend	 *fe;
-	struct xc2028_config	  cfg = {
-		.i2c_adap  = &adap->dev->i2c_adap,
-		.i2c_addr  = 0x61,
-	};
-	static struct xc2028_ctrl ctl = {
-		.fname       = XC2028_DEFAULT_FIRMWARE,
-		.max_len     = 64,
-		.demod       = XC3028_FE_ZARLINK456,
-	};
-
-	/* FIXME: generalize & move to common area */
-	adap->fe_adap[0].fe->callback = dvico_bluebird_xc2028_callback;
-
-	fe = dvb_attach(xc2028_attach, adap->fe_adap[0].fe, &cfg);
-	if (fe == NULL || fe->ops.tuner_ops.set_config == NULL)
-		return -EIO;
-
-	fe->ops.tuner_ops.set_config(fe, &ctl);
-
-	return 0;
-}
-
-static int cxusb_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe,
-		   &adap->dev->i2c_adap, &aver_a868r_tuner);
-	return 0;
-}
-
-static int cxusb_d680_dmb_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct dvb_frontend *fe;
-	fe = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe,
-			&adap->dev->i2c_adap, &d680_dmb_tuner);
-	return (fe == NULL) ? -EIO : 0;
-}
-
-static int cxusb_mygica_d689_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct dvb_frontend *fe;
-	fe = dvb_attach(max2165_attach, adap->fe_adap[0].fe,
-			&adap->dev->i2c_adap, &mygica_d689_max2165_cfg);
-	return (fe == NULL) ? -EIO : 0;
-}
-
-static int cxusb_cx22702_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	u8 b;
-	if (usb_set_interface(adap->dev->udev, 0, 6) < 0)
-		err("set interface failed");
-
-	cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, &b, 1);
-
-	adap->fe_adap[0].fe = dvb_attach(cx22702_attach, &cxusb_cx22702_config,
-					 &adap->dev->i2c_adap);
-	if ((adap->fe_adap[0].fe) != NULL)
-		return 0;
-
-	return -EIO;
-}
-
-static int cxusb_lgdt3303_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	if (usb_set_interface(adap->dev->udev, 0, 7) < 0)
-		err("set interface failed");
-
-	cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
-
-	adap->fe_adap[0].fe = dvb_attach(lgdt330x_attach,
-					 &cxusb_lgdt3303_config,
-					 &adap->dev->i2c_adap);
-	if ((adap->fe_adap[0].fe) != NULL)
-		return 0;
-
-	return -EIO;
-}
-
-static int cxusb_aver_lgdt3303_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	adap->fe_adap[0].fe = dvb_attach(lgdt330x_attach, &cxusb_aver_lgdt3303_config,
-			      &adap->dev->i2c_adap);
-	if (adap->fe_adap[0].fe != NULL)
-		return 0;
-
-	return -EIO;
-}
-
-static int cxusb_mt352_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	/* used in both lgz201 and th7579 */
-	if (usb_set_interface(adap->dev->udev, 0, 0) < 0)
-		err("set interface failed");
-
-	cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
-
-	adap->fe_adap[0].fe = dvb_attach(mt352_attach, &cxusb_mt352_config,
-					 &adap->dev->i2c_adap);
-	if ((adap->fe_adap[0].fe) != NULL)
-		return 0;
-
-	return -EIO;
-}
-
-static int cxusb_dee1601_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	if (usb_set_interface(adap->dev->udev, 0, 0) < 0)
-		err("set interface failed");
-
-	cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
-
-	adap->fe_adap[0].fe = dvb_attach(mt352_attach, &cxusb_dee1601_config,
-					 &adap->dev->i2c_adap);
-	if ((adap->fe_adap[0].fe) != NULL)
-		return 0;
-
-	adap->fe_adap[0].fe = dvb_attach(zl10353_attach,
-					 &cxusb_zl10353_dee1601_config,
-					 &adap->dev->i2c_adap);
-	if ((adap->fe_adap[0].fe) != NULL)
-		return 0;
-
-	return -EIO;
-}
-
-static int cxusb_dualdig4_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	u8 ircode[4];
-	int i;
-	struct i2c_msg msg = { .addr = 0x6b, .flags = I2C_M_RD,
-			       .buf = ircode, .len = 4 };
-
-	if (usb_set_interface(adap->dev->udev, 0, 1) < 0)
-		err("set interface failed");
-
-	cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
-
-	/* reset the tuner and demodulator */
-	cxusb_bluebird_gpio_rw(adap->dev, 0x04, 0);
-	cxusb_bluebird_gpio_pulse(adap->dev, 0x01, 1);
-	cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1);
-
-	adap->fe_adap[0].fe =
-		dvb_attach(zl10353_attach,
-			   &cxusb_zl10353_xc3028_config_no_i2c_gate,
-			   &adap->dev->i2c_adap);
-	if ((adap->fe_adap[0].fe) == NULL)
-		return -EIO;
-
-	/* try to determine if there is no IR decoder on the I2C bus */
-	for (i = 0; adap->dev->props.rc.legacy.rc_map_table != NULL && i < 5; i++) {
-		msleep(20);
-		if (cxusb_i2c_xfer(&adap->dev->i2c_adap, &msg, 1) != 1)
-			goto no_IR;
-		if (ircode[0] == 0 && ircode[1] == 0)
-			continue;
-		if (ircode[2] + ircode[3] != 0xff) {
-no_IR:
-			adap->dev->props.rc.legacy.rc_map_table = NULL;
-			info("No IR receiver detected on this device.");
-			break;
-		}
-	}
-
-	return 0;
-}
-
-static struct dibx000_agc_config dib7070_agc_config = {
-	.band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
-
-	/*
-	 * P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5,
-	 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
-	 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0
-	 */
-	.setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) |
-		 (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
-	.inv_gain = 600,
-	.time_stabiliz = 10,
-	.alpha_level = 0,
-	.thlock = 118,
-	.wbd_inv = 0,
-	.wbd_ref = 3530,
-	.wbd_sel = 1,
-	.wbd_alpha = 5,
-	.agc1_max = 65535,
-	.agc1_min = 0,
-	.agc2_max = 65535,
-	.agc2_min = 0,
-	.agc1_pt1 = 0,
-	.agc1_pt2 = 40,
-	.agc1_pt3 = 183,
-	.agc1_slope1 = 206,
-	.agc1_slope2 = 255,
-	.agc2_pt1 = 72,
-	.agc2_pt2 = 152,
-	.agc2_slope1 = 88,
-	.agc2_slope2 = 90,
-	.alpha_mant = 17,
-	.alpha_exp = 27,
-	.beta_mant = 23,
-	.beta_exp = 51,
-	.perform_agc_softsplit = 0,
-};
-
-static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
-	.internal = 60000,
-	.sampling = 15000,
-	.pll_prediv = 1,
-	.pll_ratio = 20,
-	.pll_range = 3,
-	.pll_reset = 1,
-	.pll_bypass = 0,
-	.enable_refdiv = 0,
-	.bypclk_div = 0,
-	.IO_CLK_en_core = 1,
-	.ADClkSrc = 1,
-	.modulo = 2,
-	/* refsel, sel, freq_15k */
-	.sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
-	.ifreq = (0 << 25) | 0,
-	.timf = 20452225,
-	.xtal_hz = 12000000,
-};
-
-static struct dib7000p_config cxusb_dualdig4_rev2_config = {
-	.output_mode = OUTMODE_MPEG2_PAR_GATED_CLK,
-	.output_mpeg2_in_188_bytes = 1,
-
-	.agc_config_count = 1,
-	.agc = &dib7070_agc_config,
-	.bw  = &dib7070_bw_config_12_mhz,
-	.tuner_is_baseband = 1,
-	.spur_protect = 1,
-
-	.gpio_dir = 0xfcef,
-	.gpio_val = 0x0110,
-
-	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
-
-	.hostbus_diversity = 1,
-};
-
-static int cxusb_dualdig4_rev2_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	if (usb_set_interface(adap->dev->udev, 0, 1) < 0)
-		err("set interface failed");
-
-	cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
-
-	cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1);
-
-	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
-				     &cxusb_dualdig4_rev2_config) < 0) {
-		printk(KERN_WARNING "Unable to enumerate dib7000p\n");
-		return -ENODEV;
-	}
-
-	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
-			      &cxusb_dualdig4_rev2_config);
-	if (adap->fe_adap[0].fe == NULL)
-		return -EIO;
-
-	return 0;
-}
-
-static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
-{
-	return dib7000p_set_gpio(fe, 8, 0, !onoff);
-}
-
-static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
-{
-	return 0;
-}
-
-static struct dib0070_config dib7070p_dib0070_config = {
-	.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
-	.reset = dib7070_tuner_reset,
-	.sleep = dib7070_tuner_sleep,
-	.clock_khz = 12000,
-};
-
-struct dib0700_adapter_state {
-	int (*set_param_save) (struct dvb_frontend *);
-};
-
-static int dib7070_set_param_override(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct dib0700_adapter_state *state = adap->priv;
-
-	u16 offset;
-	u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
-	switch (band) {
-	case BAND_VHF: offset = 950; break;
-	default:
-	case BAND_UHF: offset = 550; break;
-	}
-
-	dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
-
-	return state->set_param_save(fe);
-}
-
-static int cxusb_dualdig4_rev2_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_adapter_state *st = adap->priv;
-	struct i2c_adapter *tun_i2c =
-		dib7000p_get_i2c_master(adap->fe_adap[0].fe,
-					DIBX000_I2C_INTERFACE_TUNER, 1);
-
-	if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
-	    &dib7070p_dib0070_config) == NULL)
-		return -ENODEV;
-
-	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
-	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7070_set_param_override;
-	return 0;
-}
-
-static int cxusb_nano2_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	if (usb_set_interface(adap->dev->udev, 0, 1) < 0)
-		err("set interface failed");
-
-	cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
-
-	/* reset the tuner and demodulator */
-	cxusb_bluebird_gpio_rw(adap->dev, 0x04, 0);
-	cxusb_bluebird_gpio_pulse(adap->dev, 0x01, 1);
-	cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1);
-
-	adap->fe_adap[0].fe = dvb_attach(zl10353_attach,
-					 &cxusb_zl10353_xc3028_config,
-					 &adap->dev->i2c_adap);
-	if ((adap->fe_adap[0].fe) != NULL)
-		return 0;
-
-	adap->fe_adap[0].fe = dvb_attach(mt352_attach,
-					 &cxusb_mt352_xc3028_config,
-					 &adap->dev->i2c_adap);
-	if ((adap->fe_adap[0].fe) != NULL)
-		return 0;
-
-	return -EIO;
-}
-
-static struct lgs8gxx_config d680_lgs8gl5_cfg = {
-	.prod = LGS8GXX_PROD_LGS8GL5,
-	.demod_address = 0x19,
-	.serial_ts = 0,
-	.ts_clk_pol = 0,
-	.ts_clk_gated = 1,
-	.if_clk_freq = 30400, /* 30.4 MHz */
-	.if_freq = 5725, /* 5.725 MHz */
-	.if_neg_center = 0,
-	.ext_adc = 0,
-	.adc_signed = 0,
-	.if_neg_edge = 0,
-};
-
-static int cxusb_d680_dmb_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct dvb_usb_device *d = adap->dev;
-	int n;
-
-	/* Select required USB configuration */
-	if (usb_set_interface(d->udev, 0, 0) < 0)
-		err("set interface failed");
-
-	/* Unblock all USB pipes */
-	usb_clear_halt(d->udev,
-		usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
-	usb_clear_halt(d->udev,
-		usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
-	usb_clear_halt(d->udev,
-		usb_rcvbulkpipe(d->udev, d->props.adapter[0].fe[0].stream.endpoint));
-
-	/* Drain USB pipes to avoid hang after reboot */
-	for (n = 0;  n < 5;  n++) {
-		cxusb_d680_dmb_drain_message(d);
-		cxusb_d680_dmb_drain_video(d);
-		msleep(200);
-	}
-
-	/* Reset the tuner */
-	if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 0) < 0) {
-		err("clear tuner gpio failed");
-		return -EIO;
-	}
-	msleep(100);
-	if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 1) < 0) {
-		err("set tuner gpio failed");
-		return -EIO;
-	}
-	msleep(100);
-
-	/* Attach frontend */
-	adap->fe_adap[0].fe = dvb_attach(lgs8gxx_attach, &d680_lgs8gl5_cfg, &d->i2c_adap);
-	if (adap->fe_adap[0].fe == NULL)
-		return -EIO;
-
-	return 0;
-}
-
-static struct atbm8830_config mygica_d689_atbm8830_cfg = {
-	.prod = ATBM8830_PROD_8830,
-	.demod_address = 0x40,
-	.serial_ts = 0,
-	.ts_sampling_edge = 1,
-	.ts_clk_gated = 0,
-	.osc_clk_freq = 30400, /* in kHz */
-	.if_freq = 0, /* zero IF */
-	.zif_swap_iq = 1,
-	.agc_min = 0x2E,
-	.agc_max = 0x90,
-	.agc_hold_loop = 0,
-};
-
-static int cxusb_mygica_d689_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct dvb_usb_device *d = adap->dev;
-
-	/* Select required USB configuration */
-	if (usb_set_interface(d->udev, 0, 0) < 0)
-		err("set interface failed");
-
-	/* Unblock all USB pipes */
-	usb_clear_halt(d->udev,
-		usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
-	usb_clear_halt(d->udev,
-		usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
-	usb_clear_halt(d->udev,
-		usb_rcvbulkpipe(d->udev, d->props.adapter[0].fe[0].stream.endpoint));
-
-
-	/* Reset the tuner */
-	if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 0) < 0) {
-		err("clear tuner gpio failed");
-		return -EIO;
-	}
-	msleep(100);
-	if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 1) < 0) {
-		err("set tuner gpio failed");
-		return -EIO;
-	}
-	msleep(100);
-
-	/* Attach frontend */
-	adap->fe_adap[0].fe = dvb_attach(atbm8830_attach, &mygica_d689_atbm8830_cfg,
-		&d->i2c_adap);
-	if (adap->fe_adap[0].fe == NULL)
-		return -EIO;
-
-	return 0;
-}
-
-/*
- * DViCO has shipped two devices with the same USB ID, but only one of them
- * needs a firmware download.  Check the device class details to see if they
- * have non-default values to decide whether the device is actually cold or
- * not, and forget a match if it turns out we selected the wrong device.
- */
-static int bluebird_fx2_identify_state(struct usb_device *udev,
-				       struct dvb_usb_device_properties *props,
-				       struct dvb_usb_device_description **desc,
-				       int *cold)
-{
-	int wascold = *cold;
-
-	*cold = udev->descriptor.bDeviceClass == 0xff &&
-		udev->descriptor.bDeviceSubClass == 0xff &&
-		udev->descriptor.bDeviceProtocol == 0xff;
-
-	if (*cold && !wascold)
-		*desc = NULL;
-
-	return 0;
-}
-
-/*
- * DViCO bluebird firmware needs the "warm" product ID to be patched into the
- * firmware file before download.
- */
-
-static const int dvico_firmware_id_offsets[] = { 6638, 3204 };
-static int bluebird_patch_dvico_firmware_download(struct usb_device *udev,
-						  const struct firmware *fw)
-{
-	int pos;
-
-	for (pos = 0; pos < ARRAY_SIZE(dvico_firmware_id_offsets); pos++) {
-		int idoff = dvico_firmware_id_offsets[pos];
-
-		if (fw->size < idoff + 4)
-			continue;
-
-		if (fw->data[idoff] == (USB_VID_DVICO & 0xff) &&
-		    fw->data[idoff + 1] == USB_VID_DVICO >> 8) {
-			struct firmware new_fw;
-			u8 *new_fw_data = vmalloc(fw->size);
-			int ret;
-
-			if (!new_fw_data)
-				return -ENOMEM;
-
-			memcpy(new_fw_data, fw->data, fw->size);
-			new_fw.size = fw->size;
-			new_fw.data = new_fw_data;
-
-			new_fw_data[idoff + 2] =
-				le16_to_cpu(udev->descriptor.idProduct) + 1;
-			new_fw_data[idoff + 3] =
-				le16_to_cpu(udev->descriptor.idProduct) >> 8;
-
-			ret = usb_cypress_load_firmware(udev, &new_fw,
-							CYPRESS_FX2);
-			vfree(new_fw_data);
-			return ret;
-		}
-	}
-
-	return -EINVAL;
-}
-
-/* DVB USB Driver stuff */
-static struct dvb_usb_device_properties cxusb_medion_properties;
-static struct dvb_usb_device_properties cxusb_bluebird_lgh064f_properties;
-static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties;
-static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties;
-static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties;
-static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties;
-static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties;
-static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties;
-static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties;
-static struct dvb_usb_device_properties cxusb_aver_a868r_properties;
-static struct dvb_usb_device_properties cxusb_d680_dmb_properties;
-static struct dvb_usb_device_properties cxusb_mygica_d689_properties;
-
-static int cxusb_probe(struct usb_interface *intf,
-		       const struct usb_device_id *id)
-{
-	if (0 == dvb_usb_device_init(intf, &cxusb_medion_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgh064f_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &cxusb_bluebird_dee1601_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgz201_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &cxusb_bluebird_dtt7579_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf,
-				&cxusb_bluebird_nano2_needsfirmware_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &cxusb_aver_a868r_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf,
-				     &cxusb_bluebird_dualdig4_rev2_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &cxusb_d680_dmb_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &cxusb_mygica_d689_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0)
-		return 0;
-
-	return -EINVAL;
-}
-
-static struct usb_device_id cxusb_table [] = {
-	{ USB_DEVICE(USB_VID_MEDION, USB_PID_MEDION_MD95700) },
-	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_COLD) },
-	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_WARM) },
-	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_1_COLD) },
-	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_1_WARM) },
-	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_COLD) },
-	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_WARM) },
-	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_COLD) },
-	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_WARM) },
-	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD) },
-	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM) },
-	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD) },
-	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM) },
-	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4) },
-	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2) },
-	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM) },
-	{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_A868R) },
-	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2) },
-	{ USB_DEVICE(USB_VID_CONEXANT, USB_PID_CONEXANT_D680_DMB) },
-	{ USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_D689) },
-	{}		/* Terminating entry */
-};
-MODULE_DEVICE_TABLE (usb, cxusb_table);
-
-static struct dvb_usb_device_properties cxusb_medion_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = CYPRESS_FX2,
-
-	.size_of_priv     = sizeof(struct cxusb_state),
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = cxusb_streaming_ctrl,
-			.frontend_attach  = cxusb_cx22702_frontend_attach,
-			.tuner_attach     = cxusb_fmd1216me_tuner_attach,
-			/* parameter for the MPEG2-data transfer */
-					.stream = {
-						.type = USB_BULK,
-				.count = 5,
-				.endpoint = 0x02,
-				.u = {
-					.bulk = {
-						.buffersize = 8192,
-					}
-				}
-			},
-		}},
-		},
-	},
-	.power_ctrl       = cxusb_power_ctrl,
-
-	.i2c_algo         = &cxusb_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 1,
-	.devices = {
-		{   "Medion MD95700 (MDUSBTV-HYBRID)",
-			{ NULL },
-			{ &cxusb_table[0], NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties cxusb_bluebird_lgh064f_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl          = DEVICE_SPECIFIC,
-	.firmware          = "dvb-usb-bluebird-01.fw",
-	.download_firmware = bluebird_patch_dvico_firmware_download,
-	/* use usb alt setting 0 for EP4 transfer (dvb-t),
-	   use usb alt setting 7 for EP2 transfer (atsc) */
-
-	.size_of_priv     = sizeof(struct cxusb_state),
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = cxusb_streaming_ctrl,
-			.frontend_attach  = cxusb_lgdt3303_frontend_attach,
-			.tuner_attach     = cxusb_lgh064f_tuner_attach,
-
-			/* parameter for the MPEG2-data transfer */
-					.stream = {
-						.type = USB_BULK,
-				.count = 5,
-				.endpoint = 0x02,
-				.u = {
-					.bulk = {
-						.buffersize = 8192,
-					}
-				}
-			},
-		}},
-		},
-	},
-
-	.power_ctrl       = cxusb_bluebird_power_ctrl,
-
-	.i2c_algo         = &cxusb_i2c_algo,
-
-	.rc.legacy = {
-		.rc_interval      = 100,
-		.rc_map_table     = rc_map_dvico_portable_table,
-		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_portable_table),
-		.rc_query         = cxusb_rc_query,
-	},
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 1,
-	.devices = {
-		{   "DViCO FusionHDTV5 USB Gold",
-			{ &cxusb_table[1], NULL },
-			{ &cxusb_table[2], NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl          = DEVICE_SPECIFIC,
-	.firmware          = "dvb-usb-bluebird-01.fw",
-	.download_firmware = bluebird_patch_dvico_firmware_download,
-	/* use usb alt setting 0 for EP4 transfer (dvb-t),
-	   use usb alt setting 7 for EP2 transfer (atsc) */
-
-	.size_of_priv     = sizeof(struct cxusb_state),
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = cxusb_streaming_ctrl,
-			.frontend_attach  = cxusb_dee1601_frontend_attach,
-			.tuner_attach     = cxusb_dee1601_tuner_attach,
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 5,
-				.endpoint = 0x04,
-				.u = {
-					.bulk = {
-						.buffersize = 8192,
-					}
-				}
-			},
-		}},
-		},
-	},
-
-	.power_ctrl       = cxusb_bluebird_power_ctrl,
-
-	.i2c_algo         = &cxusb_i2c_algo,
-
-	.rc.legacy = {
-		.rc_interval      = 150,
-		.rc_map_table     = rc_map_dvico_mce_table,
-		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_mce_table),
-		.rc_query         = cxusb_rc_query,
-	},
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 3,
-	.devices = {
-		{   "DViCO FusionHDTV DVB-T Dual USB",
-			{ &cxusb_table[3], NULL },
-			{ &cxusb_table[4], NULL },
-		},
-		{   "DigitalNow DVB-T Dual USB",
-			{ &cxusb_table[9],  NULL },
-			{ &cxusb_table[10], NULL },
-		},
-		{   "DViCO FusionHDTV DVB-T Dual Digital 2",
-			{ &cxusb_table[11], NULL },
-			{ &cxusb_table[12], NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl          = DEVICE_SPECIFIC,
-	.firmware          = "dvb-usb-bluebird-01.fw",
-	.download_firmware = bluebird_patch_dvico_firmware_download,
-	/* use usb alt setting 0 for EP4 transfer (dvb-t),
-	   use usb alt setting 7 for EP2 transfer (atsc) */
-
-	.size_of_priv     = sizeof(struct cxusb_state),
-
-	.num_adapters = 2,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = cxusb_streaming_ctrl,
-			.frontend_attach  = cxusb_mt352_frontend_attach,
-			.tuner_attach     = cxusb_lgz201_tuner_attach,
-
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 5,
-				.endpoint = 0x04,
-				.u = {
-					.bulk = {
-						.buffersize = 8192,
-					}
-				}
-			},
-		}},
-		},
-	},
-	.power_ctrl       = cxusb_bluebird_power_ctrl,
-
-	.i2c_algo         = &cxusb_i2c_algo,
-
-	.rc.legacy = {
-		.rc_interval      = 100,
-		.rc_map_table     = rc_map_dvico_portable_table,
-		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_portable_table),
-		.rc_query         = cxusb_rc_query,
-	},
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-	.num_device_descs = 1,
-	.devices = {
-		{   "DViCO FusionHDTV DVB-T USB (LGZ201)",
-			{ &cxusb_table[5], NULL },
-			{ &cxusb_table[6], NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl          = DEVICE_SPECIFIC,
-	.firmware          = "dvb-usb-bluebird-01.fw",
-	.download_firmware = bluebird_patch_dvico_firmware_download,
-	/* use usb alt setting 0 for EP4 transfer (dvb-t),
-	   use usb alt setting 7 for EP2 transfer (atsc) */
-
-	.size_of_priv     = sizeof(struct cxusb_state),
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = cxusb_streaming_ctrl,
-			.frontend_attach  = cxusb_mt352_frontend_attach,
-			.tuner_attach     = cxusb_dtt7579_tuner_attach,
-
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 5,
-				.endpoint = 0x04,
-				.u = {
-					.bulk = {
-						.buffersize = 8192,
-					}
-				}
-			},
-		}},
-		},
-	},
-	.power_ctrl       = cxusb_bluebird_power_ctrl,
-
-	.i2c_algo         = &cxusb_i2c_algo,
-
-	.rc.legacy = {
-		.rc_interval      = 100,
-		.rc_map_table     = rc_map_dvico_portable_table,
-		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_portable_table),
-		.rc_query         = cxusb_rc_query,
-	},
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 1,
-	.devices = {
-		{   "DViCO FusionHDTV DVB-T USB (TH7579)",
-			{ &cxusb_table[7], NULL },
-			{ &cxusb_table[8], NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl         = CYPRESS_FX2,
-
-	.size_of_priv     = sizeof(struct cxusb_state),
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = cxusb_streaming_ctrl,
-			.frontend_attach  = cxusb_dualdig4_frontend_attach,
-			.tuner_attach     = cxusb_dvico_xc3028_tuner_attach,
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 5,
-				.endpoint = 0x02,
-				.u = {
-					.bulk = {
-						.buffersize = 8192,
-					}
-				}
-			},
-		}},
-		},
-	},
-
-	.power_ctrl       = cxusb_power_ctrl,
-
-	.i2c_algo         = &cxusb_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.rc.legacy = {
-		.rc_interval      = 100,
-		.rc_map_table     = rc_map_dvico_mce_table,
-		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_mce_table),
-		.rc_query         = cxusb_bluebird2_rc_query,
-	},
-
-	.num_device_descs = 1,
-	.devices = {
-		{   "DViCO FusionHDTV DVB-T Dual Digital 4",
-			{ NULL },
-			{ &cxusb_table[13], NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl         = CYPRESS_FX2,
-	.identify_state   = bluebird_fx2_identify_state,
-
-	.size_of_priv     = sizeof(struct cxusb_state),
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = cxusb_streaming_ctrl,
-			.frontend_attach  = cxusb_nano2_frontend_attach,
-			.tuner_attach     = cxusb_dvico_xc3028_tuner_attach,
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 5,
-				.endpoint = 0x02,
-				.u = {
-					.bulk = {
-						.buffersize = 8192,
-					}
-				}
-			},
-		}},
-		},
-	},
-
-	.power_ctrl       = cxusb_nano2_power_ctrl,
-
-	.i2c_algo         = &cxusb_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.rc.legacy = {
-		.rc_interval      = 100,
-		.rc_map_table     = rc_map_dvico_portable_table,
-		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_portable_table),
-		.rc_query         = cxusb_bluebird2_rc_query,
-	},
-
-	.num_device_descs = 1,
-	.devices = {
-		{   "DViCO FusionHDTV DVB-T NANO2",
-			{ NULL },
-			{ &cxusb_table[14], NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl          = DEVICE_SPECIFIC,
-	.firmware          = "dvb-usb-bluebird-02.fw",
-	.download_firmware = bluebird_patch_dvico_firmware_download,
-	.identify_state    = bluebird_fx2_identify_state,
-
-	.size_of_priv      = sizeof(struct cxusb_state),
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = cxusb_streaming_ctrl,
-			.frontend_attach  = cxusb_nano2_frontend_attach,
-			.tuner_attach     = cxusb_dvico_xc3028_tuner_attach,
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 5,
-				.endpoint = 0x02,
-				.u = {
-					.bulk = {
-						.buffersize = 8192,
-					}
-				}
-			},
-		}},
-		},
-	},
-
-	.power_ctrl       = cxusb_nano2_power_ctrl,
-
-	.i2c_algo         = &cxusb_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.rc.legacy = {
-		.rc_interval      = 100,
-		.rc_map_table     = rc_map_dvico_portable_table,
-		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_portable_table),
-		.rc_query         = cxusb_rc_query,
-	},
-
-	.num_device_descs = 1,
-	.devices = {
-		{   "DViCO FusionHDTV DVB-T NANO2 w/o firmware",
-			{ &cxusb_table[14], NULL },
-			{ &cxusb_table[15], NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties cxusb_aver_a868r_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl         = CYPRESS_FX2,
-
-	.size_of_priv     = sizeof(struct cxusb_state),
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = cxusb_aver_streaming_ctrl,
-			.frontend_attach  = cxusb_aver_lgdt3303_frontend_attach,
-			.tuner_attach     = cxusb_mxl5003s_tuner_attach,
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 5,
-				.endpoint = 0x04,
-				.u = {
-					.bulk = {
-						.buffersize = 8192,
-					}
-				}
-			},
-		}},
-		},
-	},
-	.power_ctrl       = cxusb_aver_power_ctrl,
-
-	.i2c_algo         = &cxusb_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 1,
-	.devices = {
-		{   "AVerMedia AVerTVHD Volar (A868R)",
-			{ NULL },
-			{ &cxusb_table[16], NULL },
-		},
-	}
-};
-
-static
-struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl         = CYPRESS_FX2,
-
-	.size_of_priv     = sizeof(struct cxusb_state),
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.size_of_priv    = sizeof(struct dib0700_adapter_state),
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl  = cxusb_streaming_ctrl,
-			.frontend_attach = cxusb_dualdig4_rev2_frontend_attach,
-			.tuner_attach    = cxusb_dualdig4_rev2_tuner_attach,
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 7,
-				.endpoint = 0x02,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			},
-		}},
-		},
-	},
-
-	.power_ctrl       = cxusb_bluebird_power_ctrl,
-
-	.i2c_algo         = &cxusb_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.rc.legacy = {
-		.rc_interval      = 100,
-		.rc_map_table     = rc_map_dvico_mce_table,
-		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_mce_table),
-		.rc_query         = cxusb_rc_query,
-	},
-
-	.num_device_descs = 1,
-	.devices = {
-		{   "DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2)",
-			{ NULL },
-			{ &cxusb_table[17], NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties cxusb_d680_dmb_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl         = CYPRESS_FX2,
-
-	.size_of_priv     = sizeof(struct cxusb_state),
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = cxusb_d680_dmb_streaming_ctrl,
-			.frontend_attach  = cxusb_d680_dmb_frontend_attach,
-			.tuner_attach     = cxusb_d680_dmb_tuner_attach,
-
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 5,
-				.endpoint = 0x02,
-				.u = {
-					.bulk = {
-						.buffersize = 8192,
-					}
-				}
-			},
-		}},
-		},
-	},
-
-	.power_ctrl       = cxusb_d680_dmb_power_ctrl,
-
-	.i2c_algo         = &cxusb_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.rc.legacy = {
-		.rc_interval      = 100,
-		.rc_map_table     = rc_map_d680_dmb_table,
-		.rc_map_size      = ARRAY_SIZE(rc_map_d680_dmb_table),
-		.rc_query         = cxusb_d680_dmb_rc_query,
-	},
-
-	.num_device_descs = 1,
-	.devices = {
-		{
-			"Conexant DMB-TH Stick",
-			{ NULL },
-			{ &cxusb_table[18], NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties cxusb_mygica_d689_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl         = CYPRESS_FX2,
-
-	.size_of_priv     = sizeof(struct cxusb_state),
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = cxusb_d680_dmb_streaming_ctrl,
-			.frontend_attach  = cxusb_mygica_d689_frontend_attach,
-			.tuner_attach     = cxusb_mygica_d689_tuner_attach,
-
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 5,
-				.endpoint = 0x02,
-				.u = {
-					.bulk = {
-						.buffersize = 8192,
-					}
-				}
-			},
-		}},
-		},
-	},
-
-	.power_ctrl       = cxusb_d680_dmb_power_ctrl,
-
-	.i2c_algo         = &cxusb_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.rc.legacy = {
-		.rc_interval      = 100,
-		.rc_map_table     = rc_map_d680_dmb_table,
-		.rc_map_size      = ARRAY_SIZE(rc_map_d680_dmb_table),
-		.rc_query         = cxusb_d680_dmb_rc_query,
-	},
-
-	.num_device_descs = 1,
-	.devices = {
-		{
-			"Mygica D689 DMB-TH",
-			{ NULL },
-			{ &cxusb_table[19], NULL },
-		},
-	}
-};
-
-static struct usb_driver cxusb_driver = {
-	.name		= "dvb_usb_cxusb",
-	.probe		= cxusb_probe,
-	.disconnect     = dvb_usb_device_exit,
-	.id_table	= cxusb_table,
-};
-
-module_usb_driver(cxusb_driver);
-
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
-MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
-MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>");
-MODULE_DESCRIPTION("Driver for Conexant USB2.0 hybrid reference design");
-MODULE_VERSION("1.0-alpha");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/cxusb.h b/drivers/media/dvb/dvb-usb/cxusb.h
deleted file mode 100644
index 1a51eaf..0000000
--- a/drivers/media/dvb/dvb-usb/cxusb.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef _DVB_USB_CXUSB_H_
-#define _DVB_USB_CXUSB_H_
-
-#define DVB_USB_LOG_PREFIX "cxusb"
-#include "dvb-usb.h"
-
-/* usb commands - some of it are guesses, don't have a reference yet */
-#define CMD_BLUEBIRD_GPIO_RW 0x05
-
-#define CMD_I2C_WRITE     0x08
-#define CMD_I2C_READ      0x09
-
-#define CMD_GPIO_READ     0x0d
-#define CMD_GPIO_WRITE    0x0e
-#define     GPIO_TUNER         0x02
-
-#define CMD_POWER_OFF     0xdc
-#define CMD_POWER_ON      0xde
-
-#define CMD_STREAMING_ON  0x36
-#define CMD_STREAMING_OFF 0x37
-
-#define CMD_AVER_STREAM_ON  0x18
-#define CMD_AVER_STREAM_OFF 0x19
-
-#define CMD_GET_IR_CODE   0x47
-
-#define CMD_ANALOG        0x50
-#define CMD_DIGITAL       0x51
-
-struct cxusb_state {
-	u8 gpio_write_state[3];
-};
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h
deleted file mode 100644
index 7de125c..0000000
--- a/drivers/media/dvb/dvb-usb/dib0700.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/* Linux driver for devices based on the DiBcom DiB0700 USB bridge
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- *  Copyright (C) 2005-6 DiBcom, SA
- */
-#ifndef _DIB0700_H_
-#define _DIB0700_H_
-
-#define DVB_USB_LOG_PREFIX "dib0700"
-#include "dvb-usb.h"
-
-#include "dib07x0.h"
-
-extern int dvb_usb_dib0700_debug;
-#define deb_info(args...)   dprintk(dvb_usb_dib0700_debug,0x01,args)
-#define deb_fw(args...)     dprintk(dvb_usb_dib0700_debug,0x02,args)
-#define deb_fwdata(args...) dprintk(dvb_usb_dib0700_debug,0x04,args)
-#define deb_data(args...)   dprintk(dvb_usb_dib0700_debug,0x08,args)
-
-#define REQUEST_SET_USB_XFER_LEN    0x0 /* valid only for firmware version */
-					/* higher than 1.21 */
-#define REQUEST_I2C_READ            0x2
-#define REQUEST_I2C_WRITE           0x3
-#define REQUEST_POLL_RC             0x4 /* deprecated in firmware v1.20 */
-#define REQUEST_JUMPRAM             0x8
-#define REQUEST_SET_CLOCK           0xB
-#define REQUEST_SET_GPIO            0xC
-#define REQUEST_ENABLE_VIDEO        0xF
-	// 1 Byte: 4MSB(1 = enable streaming, 0 = disable streaming) 4LSB(Video Mode: 0 = MPEG2 188Bytes, 1 = Analog)
-	// 2 Byte: MPEG2 mode:  4MSB(1 = Master Mode, 0 = Slave Mode) 4LSB(Channel 1 = bit0, Channel 2 = bit1)
-	// 2 Byte: Analog mode: 4MSB(0 = 625 lines, 1 = 525 lines)    4LSB(     "                "           )
-#define REQUEST_SET_I2C_PARAM       0x10
-#define REQUEST_SET_RC              0x11
-#define REQUEST_NEW_I2C_READ        0x12
-#define REQUEST_NEW_I2C_WRITE       0x13
-#define REQUEST_GET_VERSION         0x15
-
-struct dib0700_state {
-	u8 channel_state;
-	u16 mt2060_if1[2];
-	u8 rc_toggle;
-	u8 rc_counter;
-	u8 is_dib7000pc;
-	u8 fw_use_new_i2c_api;
-	u8 disable_streaming_master_mode;
-	u32 fw_version;
-	u32 nb_packet_buffer_size;
-	int (*read_status)(struct dvb_frontend *, fe_status_t *);
-	int (*sleep)(struct dvb_frontend* fe);
-	u8 buf[255];
-};
-
-extern int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
-			       u32 *romversion, u32 *ramversion, u32 *fwtype);
-extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val);
-extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3);
-extern int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen);
-extern int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw);
-extern int dib0700_rc_setup(struct dvb_usb_device *d);
-extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
-extern struct i2c_algorithm dib0700_i2c_algo;
-extern int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
-			struct dvb_usb_device_description **desc, int *cold);
-extern int dib0700_change_protocol(struct rc_dev *dev, u64 rc_type);
-extern int dib0700_set_i2c_speed(struct dvb_usb_device *d, u16 scl_kHz);
-
-extern int dib0700_device_count;
-extern int dvb_usb_dib0700_ir_proto;
-extern struct dvb_usb_device_properties dib0700_devices[];
-extern struct usb_device_id dib0700_usb_id_table[];
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
deleted file mode 100644
index 7e9e00f..0000000
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ /dev/null
@@ -1,845 +0,0 @@
-/* Linux driver for devices based on the DiBcom DiB0700 USB bridge
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- *  Copyright (C) 2005-6 DiBcom, SA
- */
-#include "dib0700.h"
-
-/* debug */
-int dvb_usb_dib0700_debug;
-module_param_named(debug,dvb_usb_dib0700_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,2=fw,4=fwdata,8=data (or-able))." DVB_USB_DEBUG_STATUS);
-
-static int nb_packet_buffer_size = 21;
-module_param(nb_packet_buffer_size, int, 0644);
-MODULE_PARM_DESC(nb_packet_buffer_size,
-	"Set the dib0700 driver data buffer size. This parameter "
-	"corresponds to the number of TS packets. The actual size of "
-	"the data buffer corresponds to this parameter "
-	"multiplied by 188 (default: 21)");
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-
-int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
-			u32 *romversion, u32 *ramversion, u32 *fwtype)
-{
-	struct dib0700_state *st = d->priv;
-	int ret;
-
-	if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
-		err("could not acquire lock");
-		return -EINTR;
-	}
-
-	ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
-				  REQUEST_GET_VERSION,
-				  USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
-				  st->buf, 16, USB_CTRL_GET_TIMEOUT);
-	if (hwversion != NULL)
-		*hwversion  = (st->buf[0] << 24)  | (st->buf[1] << 16)  |
-			(st->buf[2] << 8)  | st->buf[3];
-	if (romversion != NULL)
-		*romversion = (st->buf[4] << 24)  | (st->buf[5] << 16)  |
-			(st->buf[6] << 8)  | st->buf[7];
-	if (ramversion != NULL)
-		*ramversion = (st->buf[8] << 24)  | (st->buf[9] << 16)  |
-			(st->buf[10] << 8) | st->buf[11];
-	if (fwtype != NULL)
-		*fwtype     = (st->buf[12] << 24) | (st->buf[13] << 16) |
-			(st->buf[14] << 8) | st->buf[15];
-	mutex_unlock(&d->usb_mutex);
-	return ret;
-}
-
-/* expecting rx buffer: request data[0] data[1] ... data[2] */
-static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen)
-{
-	int status;
-
-	deb_data(">>> ");
-	debug_dump(tx, txlen, deb_data);
-
-	status = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev,0),
-		tx[0], USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, tx, txlen,
-		USB_CTRL_GET_TIMEOUT);
-
-	if (status != txlen)
-		deb_data("ep 0 write error (status = %d, len: %d)\n",status,txlen);
-
-	return status < 0 ? status : 0;
-}
-
-/* expecting tx buffer: request data[0] ... data[n] (n <= 4) */
-int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen)
-{
-	u16 index, value;
-	int status;
-
-	if (txlen < 2) {
-		err("tx buffer length is smaller than 2. Makes no sense.");
-		return -EINVAL;
-	}
-	if (txlen > 4) {
-		err("tx buffer length is larger than 4. Not supported.");
-		return -EINVAL;
-	}
-
-	deb_data(">>> ");
-	debug_dump(tx,txlen,deb_data);
-
-	value = ((txlen - 2) << 8) | tx[1];
-	index = 0;
-	if (txlen > 2)
-		index |= (tx[2] << 8);
-	if (txlen > 3)
-		index |= tx[3];
-
-	status = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev,0), tx[0],
-			USB_TYPE_VENDOR | USB_DIR_IN, value, index, rx, rxlen,
-			USB_CTRL_GET_TIMEOUT);
-
-	if (status < 0)
-		deb_info("ep 0 read error (status = %d)\n",status);
-
-	deb_data("<<< ");
-	debug_dump(rx, rxlen, deb_data);
-
-	return status; /* length in case of success */
-}
-
-int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val)
-{
-	struct dib0700_state *st = d->priv;
-	int ret;
-
-	if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
-		err("could not acquire lock");
-		return -EINTR;
-	}
-
-	st->buf[0] = REQUEST_SET_GPIO;
-	st->buf[1] = gpio;
-	st->buf[2] = ((gpio_dir & 0x01) << 7) | ((gpio_val & 0x01) << 6);
-
-	ret = dib0700_ctrl_wr(d, st->buf, 3);
-
-	mutex_unlock(&d->usb_mutex);
-	return ret;
-}
-
-static int dib0700_set_usb_xfer_len(struct dvb_usb_device *d, u16 nb_ts_packets)
-{
-	struct dib0700_state *st = d->priv;
-	int ret;
-
-	if (st->fw_version >= 0x10201) {
-		if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
-			err("could not acquire lock");
-			return -EINTR;
-		}
-
-		st->buf[0] = REQUEST_SET_USB_XFER_LEN;
-		st->buf[1] = (nb_ts_packets >> 8) & 0xff;
-		st->buf[2] = nb_ts_packets & 0xff;
-
-		deb_info("set the USB xfer len to %i Ts packet\n", nb_ts_packets);
-
-		ret = dib0700_ctrl_wr(d, st->buf, 3);
-		mutex_unlock(&d->usb_mutex);
-	} else {
-		deb_info("this firmware does not allow to change the USB xfer len\n");
-		ret = -EIO;
-	}
-
-	return ret;
-}
-
-/*
- * I2C master xfer function (supported in 1.20 firmware)
- */
-static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg,
-				int num)
-{
-	/* The new i2c firmware messages are more reliable and in particular
-	   properly support i2c read calls not preceded by a write */
-
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	struct dib0700_state *st = d->priv;
-	uint8_t bus_mode = 1;  /* 0=eeprom bus, 1=frontend bus */
-	uint8_t gen_mode = 0; /* 0=master i2c, 1=gpio i2c */
-	uint8_t en_start = 0;
-	uint8_t en_stop = 0;
-	int result, i;
-
-	/* Ensure nobody else hits the i2c bus while we're sending our
-	   sequence of messages, (such as the remote control thread) */
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EINTR;
-
-	for (i = 0; i < num; i++) {
-		if (i == 0) {
-			/* First message in the transaction */
-			en_start = 1;
-		} else if (!(msg[i].flags & I2C_M_NOSTART)) {
-			/* Device supports repeated-start */
-			en_start = 1;
-		} else {
-			/* Not the first packet and device doesn't support
-			   repeated start */
-			en_start = 0;
-		}
-		if (i == (num - 1)) {
-			/* Last message in the transaction */
-			en_stop = 1;
-		}
-
-		if (msg[i].flags & I2C_M_RD) {
-			/* Read request */
-			u16 index, value;
-			uint8_t i2c_dest;
-
-			i2c_dest = (msg[i].addr << 1);
-			value = ((en_start << 7) | (en_stop << 6) |
-				 (msg[i].len & 0x3F)) << 8 | i2c_dest;
-			/* I2C ctrl + FE bus; */
-			index = ((gen_mode << 6) & 0xC0) |
-				((bus_mode << 4) & 0x30);
-
-			result = usb_control_msg(d->udev,
-						 usb_rcvctrlpipe(d->udev, 0),
-						 REQUEST_NEW_I2C_READ,
-						 USB_TYPE_VENDOR | USB_DIR_IN,
-						 value, index, msg[i].buf,
-						 msg[i].len,
-						 USB_CTRL_GET_TIMEOUT);
-			if (result < 0) {
-				deb_info("i2c read error (status = %d)\n", result);
-				break;
-			}
-
-			deb_data("<<< ");
-			debug_dump(msg[i].buf, msg[i].len, deb_data);
-
-		} else {
-			/* Write request */
-			if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
-				err("could not acquire lock");
-				mutex_unlock(&d->i2c_mutex);
-				return -EINTR;
-			}
-			st->buf[0] = REQUEST_NEW_I2C_WRITE;
-			st->buf[1] = msg[i].addr << 1;
-			st->buf[2] = (en_start << 7) | (en_stop << 6) |
-				(msg[i].len & 0x3F);
-			/* I2C ctrl + FE bus; */
-			st->buf[3] = ((gen_mode << 6) & 0xC0) |
-				 ((bus_mode << 4) & 0x30);
-			/* The Actual i2c payload */
-			memcpy(&st->buf[4], msg[i].buf, msg[i].len);
-
-			deb_data(">>> ");
-			debug_dump(st->buf, msg[i].len + 4, deb_data);
-
-			result = usb_control_msg(d->udev,
-						 usb_sndctrlpipe(d->udev, 0),
-						 REQUEST_NEW_I2C_WRITE,
-						 USB_TYPE_VENDOR | USB_DIR_OUT,
-						 0, 0, st->buf, msg[i].len + 4,
-						 USB_CTRL_GET_TIMEOUT);
-			mutex_unlock(&d->usb_mutex);
-			if (result < 0) {
-				deb_info("i2c write error (status = %d)\n", result);
-				break;
-			}
-		}
-	}
-	mutex_unlock(&d->i2c_mutex);
-	return i;
-}
-
-/*
- * I2C master xfer function (pre-1.20 firmware)
- */
-static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap,
-				   struct i2c_msg *msg, int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	struct dib0700_state *st = d->priv;
-	int i,len;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EINTR;
-	if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
-		err("could not acquire lock");
-		mutex_unlock(&d->i2c_mutex);
-		return -EINTR;
-	}
-
-	for (i = 0; i < num; i++) {
-		/* fill in the address */
-		st->buf[1] = msg[i].addr << 1;
-		/* fill the buffer */
-		memcpy(&st->buf[2], msg[i].buf, msg[i].len);
-
-		/* write/read request */
-		if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
-			st->buf[0] = REQUEST_I2C_READ;
-			st->buf[1] |= 1;
-
-			/* special thing in the current firmware: when length is zero the read-failed */
-			len = dib0700_ctrl_rd(d, st->buf, msg[i].len + 2,
-					msg[i+1].buf, msg[i+1].len);
-			if (len <= 0) {
-				deb_info("I2C read failed on address 0x%02x\n",
-						msg[i].addr);
-				break;
-			}
-
-			msg[i+1].len = len;
-
-			i++;
-		} else {
-			st->buf[0] = REQUEST_I2C_WRITE;
-			if (dib0700_ctrl_wr(d, st->buf, msg[i].len + 2) < 0)
-				break;
-		}
-	}
-	mutex_unlock(&d->usb_mutex);
-	mutex_unlock(&d->i2c_mutex);
-
-	return i;
-}
-
-static int dib0700_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
-			    int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	struct dib0700_state *st = d->priv;
-
-	if (st->fw_use_new_i2c_api == 1) {
-		/* User running at least fw 1.20 */
-		return dib0700_i2c_xfer_new(adap, msg, num);
-	} else {
-		/* Use legacy calls */
-		return dib0700_i2c_xfer_legacy(adap, msg, num);
-	}
-}
-
-static u32 dib0700_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-struct i2c_algorithm dib0700_i2c_algo = {
-	.master_xfer   = dib0700_i2c_xfer,
-	.functionality = dib0700_i2c_func,
-};
-
-int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
-			struct dvb_usb_device_description **desc, int *cold)
-{
-	s16 ret;
-	u8 *b;
-
-	b = kmalloc(16, GFP_KERNEL);
-	if (!b)
-		return	-ENOMEM;
-
-
-	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-		REQUEST_GET_VERSION, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, b, 16, USB_CTRL_GET_TIMEOUT);
-
-	deb_info("FW GET_VERSION length: %d\n",ret);
-
-	*cold = ret <= 0;
-	deb_info("cold: %d\n", *cold);
-
-	kfree(b);
-	return 0;
-}
-
-static int dib0700_set_clock(struct dvb_usb_device *d, u8 en_pll,
-	u8 pll_src, u8 pll_range, u8 clock_gpio3, u16 pll_prediv,
-	u16 pll_loopdiv, u16 free_div, u16 dsuScaler)
-{
-	struct dib0700_state *st = d->priv;
-	int ret;
-
-	if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
-		err("could not acquire lock");
-		return -EINTR;
-	}
-
-	st->buf[0] = REQUEST_SET_CLOCK;
-	st->buf[1] = (en_pll << 7) | (pll_src << 6) |
-		(pll_range << 5) | (clock_gpio3 << 4);
-	st->buf[2] = (pll_prediv >> 8)  & 0xff; /* MSB */
-	st->buf[3] =  pll_prediv        & 0xff; /* LSB */
-	st->buf[4] = (pll_loopdiv >> 8) & 0xff; /* MSB */
-	st->buf[5] =  pll_loopdiv       & 0xff; /* LSB */
-	st->buf[6] = (free_div >> 8)    & 0xff; /* MSB */
-	st->buf[7] =  free_div          & 0xff; /* LSB */
-	st->buf[8] = (dsuScaler >> 8)   & 0xff; /* MSB */
-	st->buf[9] =  dsuScaler         & 0xff; /* LSB */
-
-	ret = dib0700_ctrl_wr(d, st->buf, 10);
-	mutex_unlock(&d->usb_mutex);
-
-	return ret;
-}
-
-int dib0700_set_i2c_speed(struct dvb_usb_device *d, u16 scl_kHz)
-{
-	struct dib0700_state *st = d->priv;
-	u16 divider;
-	int ret;
-
-	if (scl_kHz == 0)
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
-		err("could not acquire lock");
-		return -EINTR;
-	}
-
-	st->buf[0] = REQUEST_SET_I2C_PARAM;
-	divider = (u16) (30000 / scl_kHz);
-	st->buf[1] = 0;
-	st->buf[2] = (u8) (divider >> 8);
-	st->buf[3] = (u8) (divider & 0xff);
-	divider = (u16) (72000 / scl_kHz);
-	st->buf[4] = (u8) (divider >> 8);
-	st->buf[5] = (u8) (divider & 0xff);
-	divider = (u16) (72000 / scl_kHz); /* clock: 72MHz */
-	st->buf[6] = (u8) (divider >> 8);
-	st->buf[7] = (u8) (divider & 0xff);
-
-	deb_info("setting I2C speed: %04x %04x %04x (%d kHz).",
-		(st->buf[2] << 8) | (st->buf[3]), (st->buf[4] << 8) |
-		st->buf[5], (st->buf[6] << 8) | st->buf[7], scl_kHz);
-
-	ret = dib0700_ctrl_wr(d, st->buf, 8);
-	mutex_unlock(&d->usb_mutex);
-
-	return ret;
-}
-
-
-int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3)
-{
-	switch (clk_MHz) {
-		case 72: dib0700_set_clock(d, 1, 0, 1, clock_out_gp3, 2, 24, 0, 0x4c); break;
-		default: return -EINVAL;
-	}
-	return 0;
-}
-
-static int dib0700_jumpram(struct usb_device *udev, u32 address)
-{
-	int ret = 0, actlen;
-	u8 *buf;
-
-	buf = kmalloc(8, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-	buf[0] = REQUEST_JUMPRAM;
-	buf[1] = 0;
-	buf[2] = 0;
-	buf[3] = 0;
-	buf[4] = (address >> 24) & 0xff;
-	buf[5] = (address >> 16) & 0xff;
-	buf[6] = (address >> 8)  & 0xff;
-	buf[7] =  address        & 0xff;
-
-	if ((ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x01),buf,8,&actlen,1000)) < 0) {
-		deb_fw("jumpram to 0x%x failed\n",address);
-		goto out;
-	}
-	if (actlen != 8) {
-		deb_fw("jumpram to 0x%x failed\n",address);
-		ret = -EIO;
-		goto out;
-	}
-out:
-	kfree(buf);
-	return ret;
-}
-
-int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw)
-{
-	struct hexline hx;
-	int pos = 0, ret, act_len, i, adap_num;
-	u8 *buf;
-	u32 fw_version;
-
-	buf = kmalloc(260, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	while ((ret = dvb_usb_get_hexline(fw, &hx, &pos)) > 0) {
-		deb_fwdata("writing to address 0x%08x (buffer: 0x%02x %02x)\n",
-				hx.addr, hx.len, hx.chk);
-
-		buf[0] = hx.len;
-		buf[1] = (hx.addr >> 8) & 0xff;
-		buf[2] =  hx.addr       & 0xff;
-		buf[3] = hx.type;
-		memcpy(&buf[4],hx.data,hx.len);
-		buf[4+hx.len] = hx.chk;
-
-		ret = usb_bulk_msg(udev,
-			usb_sndbulkpipe(udev, 0x01),
-			buf,
-			hx.len + 5,
-			&act_len,
-			1000);
-
-		if (ret < 0) {
-			err("firmware download failed at %d with %d",pos,ret);
-			goto out;
-		}
-	}
-
-	if (ret == 0) {
-		/* start the firmware */
-		if ((ret = dib0700_jumpram(udev, 0x70000000)) == 0) {
-			info("firmware started successfully.");
-			msleep(500);
-		}
-	} else
-		ret = -EIO;
-
-	/* the number of ts packet has to be at least 1 */
-	if (nb_packet_buffer_size < 1)
-		nb_packet_buffer_size = 1;
-
-	/* get the fimware version */
-	usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-				  REQUEST_GET_VERSION,
-				  USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
-				  buf, 16, USB_CTRL_GET_TIMEOUT);
-	fw_version = (buf[8] << 24) | (buf[9] << 16) | (buf[10] << 8) | buf[11];
-
-	/* set the buffer size - DVB-USB is allocating URB buffers
-	 * only after the firwmare download was successful */
-	for (i = 0; i < dib0700_device_count; i++) {
-		for (adap_num = 0; adap_num < dib0700_devices[i].num_adapters;
-				adap_num++) {
-			if (fw_version >= 0x10201) {
-				dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize = 188*nb_packet_buffer_size;
-			} else {
-				/* for fw version older than 1.20.1,
-				 * the buffersize has to be n times 512 */
-				dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize = ((188*nb_packet_buffer_size+188/2)/512)*512;
-				if (dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize < 512)
-					dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize = 512;
-			}
-		}
-	}
-out:
-	kfree(buf);
-	return ret;
-}
-
-int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	struct dib0700_state *st = adap->dev->priv;
-	int ret;
-
-	if ((onoff != 0) && (st->fw_version >= 0x10201)) {
-		/* for firmware later than 1.20.1,
-		 * the USB xfer length can be set  */
-		ret = dib0700_set_usb_xfer_len(adap->dev,
-			st->nb_packet_buffer_size);
-		if (ret < 0) {
-			deb_info("can not set the USB xfer len\n");
-			return ret;
-		}
-	}
-
-	if (mutex_lock_interruptible(&adap->dev->usb_mutex) < 0) {
-		err("could not acquire lock");
-		return -EINTR;
-	}
-
-	st->buf[0] = REQUEST_ENABLE_VIDEO;
-	/* this bit gives a kind of command,
-	 * rather than enabling something or not */
-	st->buf[1] = (onoff << 4) | 0x00;
-
-	if (st->disable_streaming_master_mode == 1)
-		st->buf[2] = 0x00;
-	else
-		st->buf[2] = 0x01 << 4; /* Master mode */
-
-	st->buf[3] = 0x00;
-
-	deb_info("modifying (%d) streaming state for %d\n", onoff, adap->id);
-
-	st->channel_state &= ~0x3;
-	if ((adap->fe_adap[0].stream.props.endpoint != 2)
-			&& (adap->fe_adap[0].stream.props.endpoint != 3)) {
-		deb_info("the endpoint number (%i) is not correct, use the adapter id instead", adap->fe_adap[0].stream.props.endpoint);
-		if (onoff)
-			st->channel_state |=	1 << (adap->id);
-		else
-			st->channel_state |=	1 << ~(adap->id);
-	} else {
-		if (onoff)
-			st->channel_state |=	1 << (adap->fe_adap[0].stream.props.endpoint-2);
-		else
-			st->channel_state |=	1 << (3-adap->fe_adap[0].stream.props.endpoint);
-	}
-
-	st->buf[2] |= st->channel_state;
-
-	deb_info("data for streaming: %x %x\n", st->buf[1], st->buf[2]);
-
-	ret = dib0700_ctrl_wr(adap->dev, st->buf, 4);
-	mutex_unlock(&adap->dev->usb_mutex);
-
-	return ret;
-}
-
-int dib0700_change_protocol(struct rc_dev *rc, u64 rc_type)
-{
-	struct dvb_usb_device *d = rc->priv;
-	struct dib0700_state *st = d->priv;
-	int new_proto, ret;
-
-	if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
-		err("could not acquire lock");
-		return -EINTR;
-	}
-
-	st->buf[0] = REQUEST_SET_RC;
-	st->buf[1] = 0;
-	st->buf[2] = 0;
-
-	/* Set the IR mode */
-	if (rc_type == RC_TYPE_RC5)
-		new_proto = 1;
-	else if (rc_type == RC_TYPE_NEC)
-		new_proto = 0;
-	else if (rc_type == RC_TYPE_RC6) {
-		if (st->fw_version < 0x10200) {
-			ret = -EINVAL;
-			goto out;
-		}
-
-		new_proto = 2;
-	} else {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	st->buf[1] = new_proto;
-
-	ret = dib0700_ctrl_wr(d, st->buf, 3);
-	if (ret < 0) {
-		err("ir protocol setup failed");
-		goto out;
-	}
-
-	d->props.rc.core.protocol = rc_type;
-
-out:
-	mutex_unlock(&d->usb_mutex);
-	return ret;
-}
-
-/* Number of keypresses to ignore before start repeating */
-#define RC_REPEAT_DELAY_V1_20 10
-
-/* This is the structure of the RC response packet starting in firmware 1.20 */
-struct dib0700_rc_response {
-	u8 report_id;
-	u8 data_state;
-	union {
-		u16 system16;
-		struct {
-			u8 not_system;
-			u8 system;
-		};
-	};
-	u8 data;
-	u8 not_data;
-};
-#define RC_MSG_SIZE_V1_20 6
-
-static void dib0700_rc_urb_completion(struct urb *purb)
-{
-	struct dvb_usb_device *d = purb->context;
-	struct dib0700_rc_response *poll_reply;
-	u32 uninitialized_var(keycode);
-	u8 toggle;
-
-	deb_info("%s()\n", __func__);
-	if (d->rc_dev == NULL) {
-		/* This will occur if disable_rc_polling=1 */
-		kfree(purb->transfer_buffer);
-		usb_free_urb(purb);
-		return;
-	}
-
-	poll_reply = purb->transfer_buffer;
-
-	if (purb->status < 0) {
-		deb_info("discontinuing polling\n");
-		kfree(purb->transfer_buffer);
-		usb_free_urb(purb);
-		return;
-	}
-
-	if (purb->actual_length != RC_MSG_SIZE_V1_20) {
-		deb_info("malformed rc msg size=%d\n", purb->actual_length);
-		goto resubmit;
-	}
-
-	deb_data("IR ID = %02X state = %02X System = %02X %02X Cmd = %02X %02X (len %d)\n",
-		 poll_reply->report_id, poll_reply->data_state,
-		 poll_reply->system, poll_reply->not_system,
-		 poll_reply->data, poll_reply->not_data,
-		 purb->actual_length);
-
-	switch (d->props.rc.core.protocol) {
-	case RC_TYPE_NEC:
-		toggle = 0;
-
-		/* NEC protocol sends repeat code as 0 0 0 FF */
-		if ((poll_reply->system == 0x00) && (poll_reply->data == 0x00)
-		    && (poll_reply->not_data == 0xff)) {
-			poll_reply->data_state = 2;
-			break;
-		}
-
-		if ((poll_reply->system ^ poll_reply->not_system) != 0xff) {
-			deb_data("NEC extended protocol\n");
-			/* NEC extended code - 24 bits */
-			keycode = be16_to_cpu(poll_reply->system16) << 8 | poll_reply->data;
-		} else {
-			deb_data("NEC normal protocol\n");
-			/* normal NEC code - 16 bits */
-			keycode = poll_reply->system << 8 | poll_reply->data;
-		}
-
-		break;
-	default:
-		deb_data("RC5 protocol\n");
-		/* RC5 Protocol */
-		toggle = poll_reply->report_id;
-		keycode = poll_reply->system << 8 | poll_reply->data;
-
-		break;
-	}
-
-	if ((poll_reply->data + poll_reply->not_data) != 0xff) {
-		/* Key failed integrity check */
-		err("key failed integrity check: %04x %02x %02x",
-		    poll_reply->system,
-		    poll_reply->data, poll_reply->not_data);
-		goto resubmit;
-	}
-
-	rc_keydown(d->rc_dev, keycode, toggle);
-
-resubmit:
-	/* Clean the buffer before we requeue */
-	memset(purb->transfer_buffer, 0, RC_MSG_SIZE_V1_20);
-
-	/* Requeue URB */
-	usb_submit_urb(purb, GFP_ATOMIC);
-}
-
-int dib0700_rc_setup(struct dvb_usb_device *d)
-{
-	struct dib0700_state *st = d->priv;
-	struct urb *purb;
-	int ret;
-
-	/* Poll-based. Don't initialize bulk mode */
-	if (st->fw_version < 0x10200)
-		return 0;
-
-	/* Starting in firmware 1.20, the RC info is provided on a bulk pipe */
-	purb = usb_alloc_urb(0, GFP_KERNEL);
-	if (purb == NULL) {
-		err("rc usb alloc urb failed\n");
-		return -ENOMEM;
-	}
-
-	purb->transfer_buffer = kzalloc(RC_MSG_SIZE_V1_20, GFP_KERNEL);
-	if (purb->transfer_buffer == NULL) {
-		err("rc kzalloc failed\n");
-		usb_free_urb(purb);
-		return -ENOMEM;
-	}
-
-	purb->status = -EINPROGRESS;
-	usb_fill_bulk_urb(purb, d->udev, usb_rcvbulkpipe(d->udev, 1),
-			  purb->transfer_buffer, RC_MSG_SIZE_V1_20,
-			  dib0700_rc_urb_completion, d);
-
-	ret = usb_submit_urb(purb, GFP_ATOMIC);
-	if (ret) {
-		err("rc submit urb failed\n");
-		kfree(purb->transfer_buffer);
-		usb_free_urb(purb);
-	}
-
-	return ret;
-}
-
-static int dib0700_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	int i;
-	struct dvb_usb_device *dev;
-
-	for (i = 0; i < dib0700_device_count; i++)
-		if (dvb_usb_device_init(intf, &dib0700_devices[i], THIS_MODULE,
-		    &dev, adapter_nr) == 0) {
-			struct dib0700_state *st = dev->priv;
-			u32 hwversion, romversion, fw_version, fwtype;
-
-			dib0700_get_version(dev, &hwversion, &romversion,
-				&fw_version, &fwtype);
-
-			deb_info("Firmware version: %x, %d, 0x%x, %d\n",
-				hwversion, romversion, fw_version, fwtype);
-
-			st->fw_version = fw_version;
-			st->nb_packet_buffer_size = (u32)nb_packet_buffer_size;
-
-			/* Disable polling mode on newer firmwares */
-			if (st->fw_version >= 0x10200)
-				dev->props.rc.core.bulk_mode = true;
-			else
-				dev->props.rc.core.bulk_mode = false;
-
-			dib0700_rc_setup(dev);
-
-			return 0;
-		}
-
-	return -ENODEV;
-}
-
-static struct usb_driver dib0700_driver = {
-	.name       = "dvb_usb_dib0700",
-	.probe      = dib0700_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table   = dib0700_usb_id_table,
-};
-
-module_usb_driver(dib0700_driver);
-
-MODULE_FIRMWARE("dvb-usb-dib0700-1.20.fw");
-MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
-MODULE_DESCRIPTION("Driver for devices based on DiBcom DiB0700 - USB bridge");
-MODULE_VERSION("1.0");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
deleted file mode 100644
index 510001d..0000000
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ /dev/null
@@ -1,4813 +0,0 @@
-/* Linux driver for devices based on the DiBcom DiB0700 USB bridge
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- *  Copyright (C) 2005-9 DiBcom, SA et al
- */
-#include "dib0700.h"
-
-#include "dib3000mc.h"
-#include "dib7000m.h"
-#include "dib7000p.h"
-#include "dib8000.h"
-#include "dib9000.h"
-#include "mt2060.h"
-#include "mt2266.h"
-#include "tuner-xc2028.h"
-#include "xc5000.h"
-#include "xc4000.h"
-#include "s5h1411.h"
-#include "dib0070.h"
-#include "dib0090.h"
-#include "lgdt3305.h"
-#include "mxl5007t.h"
-
-static int force_lna_activation;
-module_param(force_lna_activation, int, 0644);
-MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), "
-		"if applicable for the device (default: 0=automatic/off).");
-
-struct dib0700_adapter_state {
-	int (*set_param_save) (struct dvb_frontend *);
-	const struct firmware *frontend_firmware;
-};
-
-/* Hauppauge Nova-T 500 (aka Bristol)
- *  has a LNA on GPIO0 which is enabled by setting 1 */
-static struct mt2060_config bristol_mt2060_config[2] = {
-	{
-		.i2c_address = 0x60,
-		.clock_out   = 3,
-	}, {
-		.i2c_address = 0x61,
-	}
-};
-
-
-static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
-	.band_caps = BAND_VHF | BAND_UHF,
-	.setup     = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0),
-
-	.agc1_max = 42598,
-	.agc1_min = 17694,
-	.agc2_max = 45875,
-	.agc2_min = 0,
-
-	.agc1_pt1 = 0,
-	.agc1_pt2 = 59,
-
-	.agc1_slope1 = 0,
-	.agc1_slope2 = 69,
-
-	.agc2_pt1 = 0,
-	.agc2_pt2 = 59,
-
-	.agc2_slope1 = 111,
-	.agc2_slope2 = 28,
-};
-
-static struct dib3000mc_config bristol_dib3000mc_config[2] = {
-	{	.agc          = &bristol_dib3000p_mt2060_agc_config,
-		.max_time     = 0x196,
-		.ln_adc_level = 0x1cc7,
-		.output_mpeg2_in_188_bytes = 1,
-	},
-	{	.agc          = &bristol_dib3000p_mt2060_agc_config,
-		.max_time     = 0x196,
-		.ln_adc_level = 0x1cc7,
-		.output_mpeg2_in_188_bytes = 1,
-	}
-};
-
-static int bristol_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_state *st = adap->dev->priv;
-	if (adap->id == 0) {
-		dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 0); msleep(10);
-		dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 1); msleep(10);
-		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
-		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
-
-		if (force_lna_activation)
-			dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-		else
-			dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
-
-		if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) {
-			dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
-			return -ENODEV;
-		}
-	}
-	st->mt2060_if1[adap->id] = 1220;
-	return (adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap,
-		(10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0;
-}
-
-static int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval)
-{
-	struct i2c_msg msg[2] = {
-		{ .addr = 0x50, .flags = 0,        .buf = &adrs, .len = 1 },
-		{ .addr = 0x50, .flags = I2C_M_RD, .buf = pval,  .len = 1 },
-	};
-	if (i2c_transfer(adap, msg, 2) != 2) return -EREMOTEIO;
-	return 0;
-}
-
-static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
-	struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1);
-	s8 a;
-	int if1=1220;
-	if (adap->dev->udev->descriptor.idVendor  == cpu_to_le16(USB_VID_HAUPPAUGE) &&
-		adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) {
-		if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a;
-	}
-	return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c,
-			  &bristol_mt2060_config[adap->id], if1) == NULL ?
-			  -ENODEV : 0;
-}
-
-/* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */
-
-/* MT226x */
-static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = {
-	{
-		BAND_UHF,
-
-		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
-		* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
-		(0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
-	    | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
-
-		1130,
-		21,
-
-		0,
-		118,
-
-		0,
-		3530,
-		1,
-		0,
-
-		65535,
-		33770,
-		65535,
-		23592,
-
-		0,
-		62,
-		255,
-		64,
-		64,
-		132,
-		192,
-		80,
-		80,
-
-		17,
-		27,
-		23,
-		51,
-
-		1,
-	}, {
-		BAND_VHF | BAND_LBAND,
-
-		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
-		* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
-		(0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
-	    | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
-
-		2372,
-		21,
-
-		0,
-		118,
-
-		0,
-		3530,
-		1,
-		0,
-
-		65535,
-		0,
-		65535,
-		23592,
-
-		0,
-		128,
-		128,
-		128,
-		0,
-		128,
-		253,
-		81,
-		0,
-
-		17,
-		27,
-		23,
-		51,
-
-		1,
-	}
-};
-
-static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = {
-	60000, 30000,
-	1, 8, 3, 1, 0,
-	0, 0, 1, 1, 2,
-	(3 << 14) | (1 << 12) | (524 << 0),
-	0,
-	20452225,
-};
-
-static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = {
-	{	.output_mpeg2_in_188_bytes = 1,
-		.hostbus_diversity = 1,
-		.tuner_is_baseband = 1,
-
-		.agc_config_count = 2,
-		.agc = stk7700d_7000p_mt2266_agc_config,
-		.bw  = &stk7700d_mt2266_pll_config,
-
-		.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
-		.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
-		.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
-	},
-	{	.output_mpeg2_in_188_bytes = 1,
-		.hostbus_diversity = 1,
-		.tuner_is_baseband = 1,
-
-		.agc_config_count = 2,
-		.agc = stk7700d_7000p_mt2266_agc_config,
-		.bw  = &stk7700d_mt2266_pll_config,
-
-		.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
-		.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
-		.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
-	}
-};
-
-static struct mt2266_config stk7700d_mt2266_config[2] = {
-	{	.i2c_address = 0x60
-	},
-	{	.i2c_address = 0x60
-	}
-};
-
-static int stk7700P2_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	if (adap->id == 0) {
-		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-		msleep(10);
-		dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-		dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-		dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-		msleep(10);
-		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-		msleep(10);
-		if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
-					     stk7700d_dib7000p_mt2266_config)
-		    != 0) {
-			err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n", __func__);
-			return -ENODEV;
-		}
-	}
-
-	adap->fe_adap[0].fe =
-		dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,
-			   0x80 + (adap->id << 1),
-			   &stk7700d_dib7000p_mt2266_config[adap->id]);
-
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	if (adap->id == 0) {
-		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-		msleep(10);
-		dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-		dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-		dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-		msleep(10);
-		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-		msleep(10);
-		dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-		if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
-					     stk7700d_dib7000p_mt2266_config)
-		    != 0) {
-			err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n", __func__);
-			return -ENODEV;
-		}
-	}
-
-	adap->fe_adap[0].fe =
-		dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,
-			   0x80 + (adap->id << 1),
-			   &stk7700d_dib7000p_mt2266_config[adap->id]);
-
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct i2c_adapter *tun_i2c;
-	tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
-	return dvb_attach(mt2266_attach, adap->fe_adap[0].fe, tun_i2c,
-		&stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0;
-}
-
-/* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */
-static struct dibx000_agc_config xc3028_agc_config = {
-	BAND_VHF | BAND_UHF,       /* band_caps */
-
-	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
-	 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
-	 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
-	(0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
-	(3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
-
-	712,	/* inv_gain */
-	21,	/* time_stabiliz */
-
-	0,	/* alpha_level */
-	118,	/* thlock */
-
-	0,	/* wbd_inv */
-	2867,	/* wbd_ref */
-	0,	/* wbd_sel */
-	2,	/* wbd_alpha */
-
-	0,	/* agc1_max */
-	0,	/* agc1_min */
-	39718,	/* agc2_max */
-	9930,	/* agc2_min */
-	0,	/* agc1_pt1 */
-	0,	/* agc1_pt2 */
-	0,	/* agc1_pt3 */
-	0,	/* agc1_slope1 */
-	0,	/* agc1_slope2 */
-	0,	/* agc2_pt1 */
-	128,	/* agc2_pt2 */
-	29,	/* agc2_slope1 */
-	29,	/* agc2_slope2 */
-
-	17,	/* alpha_mant */
-	27,	/* alpha_exp */
-	23,	/* beta_mant */
-	51,	/* beta_exp */
-
-	1,	/* perform_agc_softsplit */
-};
-
-/* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */
-static struct dibx000_bandwidth_config xc3028_bw_config = {
-	60000, 30000, /* internal, sampling */
-	1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */
-	0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc,
-			  modulo */
-	(3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
-	(1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
-	20452225, /* timf */
-	30000000, /* xtal_hz */
-};
-
-static struct dib7000p_config stk7700ph_dib7700_xc3028_config = {
-	.output_mpeg2_in_188_bytes = 1,
-	.tuner_is_baseband = 1,
-
-	.agc_config_count = 1,
-	.agc = &xc3028_agc_config,
-	.bw  = &xc3028_bw_config,
-
-	.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
-	.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
-	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
-};
-
-static int stk7700ph_xc3028_callback(void *ptr, int component,
-				     int command, int arg)
-{
-	struct dvb_usb_adapter *adap = ptr;
-
-	switch (command) {
-	case XC2028_TUNER_RESET:
-		/* Send the tuner in then out of reset */
-		dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 0); msleep(10);
-		dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
-		break;
-	case XC2028_RESET_CLK:
-		break;
-	default:
-		err("%s: unknown command %d, arg %d\n", __func__,
-			command, arg);
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static struct xc2028_ctrl stk7700ph_xc3028_ctrl = {
-	.fname = XC2028_DEFAULT_FIRMWARE,
-	.max_len = 64,
-	.demod = XC3028_FE_DIBCOM52,
-};
-
-static struct xc2028_config stk7700ph_xc3028_config = {
-	.i2c_addr = 0x61,
-	.ctrl = &stk7700ph_xc3028_ctrl,
-};
-
-static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct usb_device_descriptor *desc = &adap->dev->udev->descriptor;
-
-	if (desc->idVendor  == cpu_to_le16(USB_VID_PINNACLE) &&
-	    desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX))
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
-	else
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-	msleep(10);
-
-	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
-				     &stk7700ph_dib7700_xc3028_config) != 0) {
-		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
-		    __func__);
-		return -ENODEV;
-	}
-
-	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
-		&stk7700ph_dib7700_xc3028_config);
-
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct i2c_adapter *tun_i2c;
-
-	tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe,
-		DIBX000_I2C_INTERFACE_TUNER, 1);
-
-	stk7700ph_xc3028_config.i2c_adap = tun_i2c;
-
-	/* FIXME: generalize & move to common area */
-	adap->fe_adap[0].fe->callback = stk7700ph_xc3028_callback;
-
-	return dvb_attach(xc2028_attach, adap->fe_adap[0].fe, &stk7700ph_xc3028_config)
-		== NULL ? -ENODEV : 0;
-}
-
-#define DEFAULT_RC_INTERVAL 50
-
-static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
-
-/* Number of keypresses to ignore before start repeating */
-#define RC_REPEAT_DELAY 6
-
-/*
- * This function is used only when firmware is < 1.20 version. Newer
- * firmwares use bulk mode, with functions implemented at dib0700_core,
- * at dib0700_rc_urb_completion()
- */
-static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
-{
-	u8 key[4];
-	u32 keycode;
-	u8 toggle;
-	int i;
-	struct dib0700_state *st = d->priv;
-
-	if (st->fw_version >= 0x10200) {
-		/* For 1.20 firmware , We need to keep the RC polling
-		   callback so we can reuse the input device setup in
-		   dvb-usb-remote.c.  However, the actual work is being done
-		   in the bulk URB completion handler. */
-		return 0;
-	}
-
-	i = dib0700_ctrl_rd(d, rc_request, 2, key, 4);
-	if (i <= 0) {
-		err("RC Query Failed");
-		return -1;
-	}
-
-	/* losing half of KEY_0 events from Philipps rc5 remotes.. */
-	if (key[0] == 0 && key[1] == 0 && key[2] == 0 && key[3] == 0)
-		return 0;
-
-	/* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]);  */
-
-	dib0700_rc_setup(d); /* reset ir sensor data to prevent false events */
-
-	d->last_event = 0;
-	switch (d->props.rc.core.protocol) {
-	case RC_TYPE_NEC:
-		/* NEC protocol sends repeat code as 0 0 0 FF */
-		if ((key[3-2] == 0x00) && (key[3-3] == 0x00) &&
-		    (key[3] == 0xff))
-			keycode = d->last_event;
-		else {
-			keycode = key[3-2] << 8 | key[3-3];
-			d->last_event = keycode;
-		}
-
-		rc_keydown(d->rc_dev, keycode, 0);
-		break;
-	default:
-		/* RC-5 protocol changes toggle bit on new keypress */
-		keycode = key[3-2] << 8 | key[3-3];
-		toggle = key[3-1];
-		rc_keydown(d->rc_dev, keycode, toggle);
-
-		break;
-	}
-	return 0;
-}
-
-/* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
-static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = {
-	BAND_UHF | BAND_VHF,
-
-	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
-	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
-	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
-	| (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
-
-	712,
-	41,
-
-	0,
-	118,
-
-	0,
-	4095,
-	0,
-	0,
-
-	42598,
-	17694,
-	45875,
-	2621,
-	0,
-	76,
-	139,
-	52,
-	59,
-	107,
-	172,
-	57,
-	70,
-
-	21,
-	25,
-	28,
-	48,
-
-	1,
-	{  0,
-	   107,
-	   51800,
-	   24700
-	},
-};
-
-static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = {
-	BAND_UHF | BAND_VHF,
-
-	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
-	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
-	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
-	| (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
-
-	712,
-	41,
-
-	0,
-	118,
-
-	0,
-	4095,
-	0,
-	0,
-
-	42598,
-	16384,
-	42598,
-	    0,
-
-	  0,
-	137,
-	255,
-
-	  0,
-	255,
-
-	0,
-	0,
-
-	 0,
-	41,
-
-	15,
-	25,
-
-	28,
-	48,
-
-	0,
-};
-
-static struct dibx000_bandwidth_config stk7700p_pll_config = {
-	60000, 30000,
-	1, 8, 3, 1, 0,
-	0, 0, 1, 1, 0,
-	(3 << 14) | (1 << 12) | (524 << 0),
-	60258167,
-	20452225,
-	30000000,
-};
-
-static struct dib7000m_config stk7700p_dib7000m_config = {
-	.dvbt_mode = 1,
-	.output_mpeg2_in_188_bytes = 1,
-	.quartz_direct = 1,
-
-	.agc_config_count = 1,
-	.agc = &stk7700p_7000m_mt2060_agc_config,
-	.bw  = &stk7700p_pll_config,
-
-	.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
-	.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
-	.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
-};
-
-static struct dib7000p_config stk7700p_dib7000p_config = {
-	.output_mpeg2_in_188_bytes = 1,
-
-	.agc_config_count = 1,
-	.agc = &stk7700p_7000p_mt2060_agc_config,
-	.bw  = &stk7700p_pll_config,
-
-	.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
-	.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
-	.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
-};
-
-static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_state *st = adap->dev->priv;
-	/* unless there is no real power management in DVB - we leave the device on GPIO6 */
-
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 0); msleep(50);
-
-	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 1); msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO9,  GPIO_OUT, 1);
-
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
-	dib0700_ctrl_clock(adap->dev, 72, 1);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100);
-
-	dib0700_set_gpio(adap->dev,  GPIO0, GPIO_OUT, 1);
-
-	st->mt2060_if1[0] = 1220;
-
-	if (dib7000pc_detection(&adap->dev->i2c_adap)) {
-		adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
-		st->is_dib7000pc = 1;
-	} else
-		adap->fe_adap[0].fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config);
-
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-static struct mt2060_config stk7700p_mt2060_config = {
-	0x60
-};
-
-static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
-	struct dib0700_state *st = adap->dev->priv;
-	struct i2c_adapter *tun_i2c;
-	s8 a;
-	int if1=1220;
-	if (adap->dev->udev->descriptor.idVendor  == cpu_to_le16(USB_VID_HAUPPAUGE) &&
-		adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) {
-		if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a;
-	}
-	if (st->is_dib7000pc)
-		tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
-	else
-		tun_i2c = dib7000m_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
-
-	return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk7700p_mt2060_config,
-		if1) == NULL ? -ENODEV : 0;
-}
-
-/* DIB7070 generic */
-static struct dibx000_agc_config dib7070_agc_config = {
-	BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
-	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
-	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
-	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
-	| (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
-
-	600,
-	10,
-
-	0,
-	118,
-
-	0,
-	3530,
-	1,
-	5,
-
-	65535,
-		0,
-
-	65535,
-	0,
-
-	0,
-	40,
-	183,
-	206,
-	255,
-	72,
-	152,
-	88,
-	90,
-
-	17,
-	27,
-	23,
-	51,
-
-	0,
-};
-
-static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
-{
-	deb_info("reset: %d", onoff);
-	return dib7000p_set_gpio(fe, 8, 0, !onoff);
-}
-
-static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
-{
-	deb_info("sleep: %d", onoff);
-	return dib7000p_set_gpio(fe, 9, 0, onoff);
-}
-
-static struct dib0070_config dib7070p_dib0070_config[2] = {
-	{
-		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
-		.reset = dib7070_tuner_reset,
-		.sleep = dib7070_tuner_sleep,
-		.clock_khz = 12000,
-		.clock_pad_drive = 4,
-		.charge_pump = 2,
-	}, {
-		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
-		.reset = dib7070_tuner_reset,
-		.sleep = dib7070_tuner_sleep,
-		.clock_khz = 12000,
-		.charge_pump = 2,
-	}
-};
-
-static struct dib0070_config dib7770p_dib0070_config = {
-	 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
-	 .reset = dib7070_tuner_reset,
-	 .sleep = dib7070_tuner_sleep,
-	 .clock_khz = 12000,
-	 .clock_pad_drive = 0,
-	 .flip_chip = 1,
-	 .charge_pump = 2,
-};
-
-static int dib7070_set_param_override(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct dib0700_adapter_state *state = adap->priv;
-
-	u16 offset;
-	u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
-	switch (band) {
-		case BAND_VHF: offset = 950; break;
-		case BAND_UHF:
-		default: offset = 550; break;
-	}
-	deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
-	dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
-	return state->set_param_save(fe);
-}
-
-static int dib7770_set_param_override(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct dib0700_adapter_state *state = adap->priv;
-
-	 u16 offset;
-	 u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
-	 switch (band) {
-	 case BAND_VHF:
-		  dib7000p_set_gpio(fe, 0, 0, 1);
-		  offset = 850;
-		  break;
-	 case BAND_UHF:
-	 default:
-		  dib7000p_set_gpio(fe, 0, 0, 0);
-		  offset = 250;
-		  break;
-	 }
-	 deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
-	 dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
-	 return state->set_param_save(fe);
-}
-
-static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	 struct dib0700_adapter_state *st = adap->priv;
-	 struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe,
-			 DIBX000_I2C_INTERFACE_TUNER, 1);
-
-	 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
-			&dib7770p_dib0070_config) == NULL)
-		 return -ENODEV;
-
-	 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
-	 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7770_set_param_override;
-	 return 0;
-}
-
-static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_adapter_state *st = adap->priv;
-	struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
-
-	if (adap->id == 0) {
-		if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL)
-			return -ENODEV;
-	} else {
-		if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL)
-			return -ENODEV;
-	}
-
-	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
-	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7070_set_param_override;
-	return 0;
-}
-
-static int stk7700p_pid_filter(struct dvb_usb_adapter *adapter, int index,
-		u16 pid, int onoff)
-{
-	struct dib0700_state *st = adapter->dev->priv;
-	if (st->is_dib7000pc)
-		return dib7000p_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
-	return dib7000m_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
-}
-
-static int stk7700p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
-{
-	struct dib0700_state *st = adapter->dev->priv;
-	if (st->is_dib7000pc)
-		return dib7000p_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
-	return dib7000m_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
-}
-
-static int stk70x0p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
-{
-	return dib7000p_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
-}
-
-static int stk70x0p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
-{
-	return dib7000p_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
-}
-
-static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
-	60000, 15000,
-	1, 20, 3, 1, 0,
-	0, 0, 1, 1, 2,
-	(3 << 14) | (1 << 12) | (524 << 0),
-	(0 << 25) | 0,
-	20452225,
-	12000000,
-};
-
-static struct dib7000p_config dib7070p_dib7000p_config = {
-	.output_mpeg2_in_188_bytes = 1,
-
-	.agc_config_count = 1,
-	.agc = &dib7070_agc_config,
-	.bw  = &dib7070_bw_config_12_mhz,
-	.tuner_is_baseband = 1,
-	.spur_protect = 1,
-
-	.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
-	.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
-	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
-
-	.hostbus_diversity = 1,
-};
-
-/* STK7070P */
-static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
-	if (p->idVendor  == cpu_to_le16(USB_VID_PINNACLE) &&
-	    p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
-		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
-	else
-		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-
-	dib0700_ctrl_clock(adap->dev, 72, 1);
-
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-
-	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
-				     &dib7070p_dib7000p_config) != 0) {
-		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
-		    __func__);
-		return -ENODEV;
-	}
-
-	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
-		&dib7070p_dib7000p_config);
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-/* STK7770P */
-static struct dib7000p_config dib7770p_dib7000p_config = {
-	.output_mpeg2_in_188_bytes = 1,
-
-	.agc_config_count = 1,
-	.agc = &dib7070_agc_config,
-	.bw  = &dib7070_bw_config_12_mhz,
-	.tuner_is_baseband = 1,
-	.spur_protect = 1,
-
-	.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
-	.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
-	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
-
-	.hostbus_diversity = 1,
-	.enable_current_mirror = 1,
-	.disable_sample_and_hold = 0,
-};
-
-static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
-	if (p->idVendor  == cpu_to_le16(USB_VID_PINNACLE) &&
-	    p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
-		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
-	else
-		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-
-	dib0700_ctrl_clock(adap->dev, 72, 1);
-
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-
-	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
-				     &dib7770p_dib7000p_config) != 0) {
-		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
-		    __func__);
-		return -ENODEV;
-	}
-
-	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
-		&dib7770p_dib7000p_config);
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-/* DIB807x generic */
-static struct dibx000_agc_config dib807x_agc_config[2] = {
-	{
-		BAND_VHF,
-		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
-		 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
-		 * P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0,
-		 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
-		 * P_agc_write=0 */
-		(0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) |
-			(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
-			(0 << 0), /* setup*/
-
-		600, /* inv_gain*/
-		10,  /* time_stabiliz*/
-
-		0,  /* alpha_level*/
-		118,  /* thlock*/
-
-		0,     /* wbd_inv*/
-		3530,  /* wbd_ref*/
-		1,     /* wbd_sel*/
-		5,     /* wbd_alpha*/
-
-		65535,  /* agc1_max*/
-		0,  /* agc1_min*/
-
-		65535,  /* agc2_max*/
-		0,      /* agc2_min*/
-
-		0,      /* agc1_pt1*/
-		40,     /* agc1_pt2*/
-		183,    /* agc1_pt3*/
-		206,    /* agc1_slope1*/
-		255,    /* agc1_slope2*/
-		72,     /* agc2_pt1*/
-		152,    /* agc2_pt2*/
-		88,     /* agc2_slope1*/
-		90,     /* agc2_slope2*/
-
-		17,  /* alpha_mant*/
-		27,  /* alpha_exp*/
-		23,  /* beta_mant*/
-		51,  /* beta_exp*/
-
-		0,  /* perform_agc_softsplit*/
-	}, {
-		BAND_UHF,
-		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
-		 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
-		 * P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
-		 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
-		 * P_agc_write=0 */
-		(0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) |
-			(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
-			(0 << 0), /* setup */
-
-		600, /* inv_gain*/
-		10,  /* time_stabiliz*/
-
-		0,  /* alpha_level*/
-		118,  /* thlock*/
-
-		0,     /* wbd_inv*/
-		3530,  /* wbd_ref*/
-		1,     /* wbd_sel*/
-		5,     /* wbd_alpha*/
-
-		65535,  /* agc1_max*/
-		0,  /* agc1_min*/
-
-		65535,  /* agc2_max*/
-		0,      /* agc2_min*/
-
-		0,      /* agc1_pt1*/
-		40,     /* agc1_pt2*/
-		183,    /* agc1_pt3*/
-		206,    /* agc1_slope1*/
-		255,    /* agc1_slope2*/
-		72,     /* agc2_pt1*/
-		152,    /* agc2_pt2*/
-		88,     /* agc2_slope1*/
-		90,     /* agc2_slope2*/
-
-		17,  /* alpha_mant*/
-		27,  /* alpha_exp*/
-		23,  /* beta_mant*/
-		51,  /* beta_exp*/
-
-		0,  /* perform_agc_softsplit*/
-	}
-};
-
-static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = {
-	60000, 15000, /* internal, sampling*/
-	1, 20, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass*/
-	0, 0, 1, 1, 2, /* misc: refdiv, bypclk_div, IO_CLK_en_core,
-			  ADClkSrc, modulo */
-	(3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/
-	(0 << 25) | 0, /* ifreq = 0.000000 MHz*/
-	18179755, /* timf*/
-	12000000, /* xtal_hz*/
-};
-
-static struct dib8000_config dib807x_dib8000_config[2] = {
-	{
-		.output_mpeg2_in_188_bytes = 1,
-
-		.agc_config_count = 2,
-		.agc = dib807x_agc_config,
-		.pll = &dib807x_bw_config_12_mhz,
-		.tuner_is_baseband = 1,
-
-		.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
-		.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
-		.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
-
-		.hostbus_diversity = 1,
-		.div_cfg = 1,
-		.agc_control = &dib0070_ctrl_agc_filter,
-		.output_mode = OUTMODE_MPEG2_FIFO,
-		.drives = 0x2d98,
-	}, {
-		.output_mpeg2_in_188_bytes = 1,
-
-		.agc_config_count = 2,
-		.agc = dib807x_agc_config,
-		.pll = &dib807x_bw_config_12_mhz,
-		.tuner_is_baseband = 1,
-
-		.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
-		.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
-		.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
-
-		.hostbus_diversity = 1,
-		.agc_control = &dib0070_ctrl_agc_filter,
-		.output_mode = OUTMODE_MPEG2_FIFO,
-		.drives = 0x2d98,
-	}
-};
-
-static int dib80xx_tuner_reset(struct dvb_frontend *fe, int onoff)
-{
-	return dib8000_set_gpio(fe, 5, 0, !onoff);
-}
-
-static int dib80xx_tuner_sleep(struct dvb_frontend *fe, int onoff)
-{
-	return dib8000_set_gpio(fe, 0, 0, onoff);
-}
-
-static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = {
-    { 240,      7},
-    { 0xffff,   6},
-};
-
-static struct dib0070_config dib807x_dib0070_config[2] = {
-	{
-		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
-		.reset = dib80xx_tuner_reset,
-		.sleep = dib80xx_tuner_sleep,
-		.clock_khz = 12000,
-		.clock_pad_drive = 4,
-		.vga_filter = 1,
-		.force_crystal_mode = 1,
-		.enable_third_order_filter = 1,
-		.charge_pump = 0,
-		.wbd_gain = dib8070_wbd_gain_cfg,
-		.osc_buffer_state = 0,
-		.freq_offset_khz_uhf = -100,
-		.freq_offset_khz_vhf = -100,
-	}, {
-		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
-		.reset = dib80xx_tuner_reset,
-		.sleep = dib80xx_tuner_sleep,
-		.clock_khz = 12000,
-		.clock_pad_drive = 2,
-		.vga_filter = 1,
-		.force_crystal_mode = 1,
-		.enable_third_order_filter = 1,
-		.charge_pump = 0,
-		.wbd_gain = dib8070_wbd_gain_cfg,
-		.osc_buffer_state = 0,
-		.freq_offset_khz_uhf = -25,
-		.freq_offset_khz_vhf = -25,
-	}
-};
-
-static int dib807x_set_param_override(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct dib0700_adapter_state *state = adap->priv;
-
-	u16 offset = dib0070_wbd_offset(fe);
-	u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
-	switch (band) {
-	case BAND_VHF:
-		offset += 750;
-		break;
-	case BAND_UHF:  /* fall-thru wanted */
-	default:
-		offset += 250; break;
-	}
-	deb_info("WBD for DiB8000: %d\n", offset);
-	dib8000_set_wbd_ref(fe, offset);
-
-	return state->set_param_save(fe);
-}
-
-static int dib807x_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_adapter_state *st = adap->priv;
-	struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe,
-			DIBX000_I2C_INTERFACE_TUNER, 1);
-
-	if (adap->id == 0) {
-		if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
-				&dib807x_dib0070_config[0]) == NULL)
-			return -ENODEV;
-	} else {
-		if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
-				&dib807x_dib0070_config[1]) == NULL)
-			return -ENODEV;
-	}
-
-	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
-	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib807x_set_param_override;
-	return 0;
-}
-
-static int stk80xx_pid_filter(struct dvb_usb_adapter *adapter, int index,
-	u16 pid, int onoff)
-{
-	return dib8000_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
-}
-
-static int stk80xx_pid_filter_ctrl(struct dvb_usb_adapter *adapter,
-		int onoff)
-{
-	return dib8000_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
-}
-
-/* STK807x */
-static int stk807x_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-
-	dib0700_ctrl_clock(adap->dev, 72, 1);
-
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-
-	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
-				0x80, 0);
-
-	adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
-			      &dib807x_dib8000_config[0]);
-
-	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
-}
-
-/* STK807xPVR */
-static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap)
-{
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
-	msleep(30);
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-	msleep(500);
-	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-
-	dib0700_ctrl_clock(adap->dev, 72, 1);
-
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-
-	/* initialize IC 0 */
-	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x80, 0);
-
-	adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
-			      &dib807x_dib8000_config[0]);
-
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap)
-{
-	/* initialize IC 1 */
-	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x82, 0);
-
-	adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82,
-			      &dib807x_dib8000_config[1]);
-
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-/* STK8096GP */
-static struct dibx000_agc_config dib8090_agc_config[2] = {
-	{
-	BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
-	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
-	 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
-	 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
-	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
-	| (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
-
-	787,
-	10,
-
-	0,
-	118,
-
-	0,
-	3530,
-	1,
-	5,
-
-	65535,
-	0,
-
-	65535,
-	0,
-
-	0,
-	32,
-	114,
-	143,
-	144,
-	114,
-	227,
-	116,
-	117,
-
-	28,
-	26,
-	31,
-	51,
-
-	0,
-	},
-	{
-	BAND_CBAND,
-	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
-	 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
-	 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
-	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
-	| (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
-
-	787,
-	10,
-
-	0,
-	118,
-
-	0,
-	3530,
-	1,
-	5,
-
-	0,
-	0,
-
-	65535,
-	0,
-
-	0,
-	32,
-	114,
-	143,
-	144,
-	114,
-	227,
-	116,
-	117,
-
-	28,
-	26,
-	31,
-	51,
-
-	0,
-	}
-};
-
-static struct dibx000_bandwidth_config dib8090_pll_config_12mhz = {
-	54000, 13500,
-	1, 18, 3, 1, 0,
-	0, 0, 1, 1, 2,
-	(3 << 14) | (1 << 12) | (599 << 0),
-	(0 << 25) | 0,
-	20199727,
-	12000000,
-};
-
-static int dib8090_get_adc_power(struct dvb_frontend *fe)
-{
-	return dib8000_get_adc_power(fe, 1);
-}
-
-static struct dib8000_config dib809x_dib8000_config[2] = {
-	{
-	.output_mpeg2_in_188_bytes = 1,
-
-	.agc_config_count = 2,
-	.agc = dib8090_agc_config,
-	.agc_control = dib0090_dcc_freq,
-	.pll = &dib8090_pll_config_12mhz,
-	.tuner_is_baseband = 1,
-
-	.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
-	.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
-	.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
-
-	.hostbus_diversity = 1,
-	.div_cfg = 0x31,
-	.output_mode = OUTMODE_MPEG2_FIFO,
-	.drives = 0x2d98,
-	.diversity_delay = 48,
-	.refclksel = 3,
-	}, {
-	.output_mpeg2_in_188_bytes = 1,
-
-	.agc_config_count = 2,
-	.agc = dib8090_agc_config,
-	.agc_control = dib0090_dcc_freq,
-	.pll = &dib8090_pll_config_12mhz,
-	.tuner_is_baseband = 1,
-
-	.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
-	.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
-	.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
-
-	.hostbus_diversity = 1,
-	.div_cfg = 0x31,
-	.output_mode = OUTMODE_DIVERSITY,
-	.drives = 0x2d08,
-	.diversity_delay = 1,
-	.refclksel = 3,
-	}
-};
-
-static struct dib0090_wbd_slope dib8090_wbd_table[] = {
-	/* max freq ; cold slope ; cold offset ; warm slope ; warm offset ; wbd gain */
-	{ 120,     0, 500,  0,   500, 4 }, /* CBAND */
-	{ 170,     0, 450,  0,   450, 4 }, /* CBAND */
-	{ 380,    48, 373, 28,   259, 6 }, /* VHF */
-	{ 860,    34, 700, 36,   616, 6 }, /* high UHF */
-	{ 0xFFFF, 34, 700, 36,   616, 6 }, /* default */
-};
-
-static struct dib0090_config dib809x_dib0090_config = {
-	.io.pll_bypass = 1,
-	.io.pll_range = 1,
-	.io.pll_prediv = 1,
-	.io.pll_loopdiv = 20,
-	.io.adc_clock_ratio = 8,
-	.io.pll_int_loop_filt = 0,
-	.io.clock_khz = 12000,
-	.reset = dib80xx_tuner_reset,
-	.sleep = dib80xx_tuner_sleep,
-	.clkouttobamse = 1,
-	.analog_output = 1,
-	.i2c_address = DEFAULT_DIB0090_I2C_ADDRESS,
-	.use_pwm_agc = 1,
-	.clkoutdrive = 1,
-	.get_adc_power = dib8090_get_adc_power,
-	.freq_offset_khz_uhf = -63,
-	.freq_offset_khz_vhf = -143,
-	.wbd = dib8090_wbd_table,
-	.fref_clock_ratio = 6,
-};
-
-static int dib8096_set_param_override(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct dib0700_adapter_state *state = adap->priv;
-	u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
-	u16 target;
-	int ret = 0;
-	enum frontend_tune_state tune_state = CT_SHUTDOWN;
-	u16 ltgain, rf_gain_limit;
-
-	ret = state->set_param_save(fe);
-	if (ret < 0)
-		return ret;
-
-	target = (dib0090_get_wbd_target(fe) * 8 * 18 / 33 + 1) / 2;
-	dib8000_set_wbd_ref(fe, target);
-
-
-	if (band == BAND_CBAND) {
-		deb_info("tuning in CBAND - soft-AGC startup\n");
-		dib0090_set_tune_state(fe, CT_AGC_START);
-		do {
-			ret = dib0090_gain_control(fe);
-			msleep(ret);
-			tune_state = dib0090_get_tune_state(fe);
-			if (tune_state == CT_AGC_STEP_0)
-				dib8000_set_gpio(fe, 6, 0, 1);
-			else if (tune_state == CT_AGC_STEP_1) {
-				dib0090_get_current_gain(fe, NULL, NULL, &rf_gain_limit, &ltgain);
-				if (rf_gain_limit == 0)
-					dib8000_set_gpio(fe, 6, 0, 0);
-			}
-		} while (tune_state < CT_AGC_STOP);
-		dib0090_pwm_gain_reset(fe);
-		dib8000_pwm_agc_reset(fe);
-		dib8000_set_tune_state(fe, CT_DEMOD_START);
-	} else {
-		deb_info("not tuning in CBAND - standard AGC startup\n");
-		dib0090_pwm_gain_reset(fe);
-	}
-
-	return 0;
-}
-
-static int dib809x_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_adapter_state *st = adap->priv;
-	struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
-
-	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
-		return -ENODEV;
-
-	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
-	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
-	return 0;
-}
-
-static int stk809x_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-
-	dib0700_ctrl_clock(adap->dev, 72, 1);
-
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-
-	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80, 0);
-
-	adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]);
-
-	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
-}
-
-static int nim8096md_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_adapter_state *st = adap->priv;
-	struct i2c_adapter *tun_i2c;
-	struct dvb_frontend *fe_slave  = dib8000_get_slave_frontend(adap->fe_adap[0].fe, 1);
-
-	if (fe_slave) {
-		tun_i2c = dib8000_get_i2c_master(fe_slave, DIBX000_I2C_INTERFACE_TUNER, 1);
-		if (dvb_attach(dib0090_register, fe_slave, tun_i2c, &dib809x_dib0090_config) == NULL)
-			return -ENODEV;
-		fe_slave->dvb = adap->fe_adap[0].fe->dvb;
-		fe_slave->ops.tuner_ops.set_params = dib8096_set_param_override;
-	}
-	tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
-	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
-		return -ENODEV;
-
-	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
-	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
-
-	return 0;
-}
-
-static int nim8096md_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct dvb_frontend *fe_slave;
-
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-	msleep(1000);
-	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-
-	dib0700_ctrl_clock(adap->dev, 72, 1);
-
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-
-	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, 0x80, 0);
-
-	adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]);
-	if (adap->fe_adap[0].fe == NULL)
-		return -ENODEV;
-
-	fe_slave = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82, &dib809x_dib8000_config[1]);
-	dib8000_set_slave_frontend(adap->fe_adap[0].fe, fe_slave);
-
-	return fe_slave == NULL ?  -ENODEV : 0;
-}
-
-/* TFE8096P */
-static struct dibx000_agc_config dib8096p_agc_config[2] = {
-	{
-		.band_caps		= BAND_UHF,
-		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
-		   P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
-		   P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
-		   P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
-		   P_agc_write=0 */
-		.setup			= (0 << 15) | (0 << 14) | (5 << 11)
-			| (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5)
-			| (0 << 4) | (5 << 1) | (0 << 0),
-
-		.inv_gain		= 684,
-		.time_stabiliz	= 10,
-
-		.alpha_level	= 0,
-		.thlock			= 118,
-
-		.wbd_inv		= 0,
-		.wbd_ref		= 1200,
-		.wbd_sel		= 3,
-		.wbd_alpha		= 5,
-
-		.agc1_max		= 65535,
-		.agc1_min		= 0,
-
-		.agc2_max		= 32767,
-		.agc2_min		= 0,
-
-		.agc1_pt1		= 0,
-		.agc1_pt2		= 0,
-		.agc1_pt3		= 105,
-		.agc1_slope1	= 0,
-		.agc1_slope2	= 156,
-		.agc2_pt1		= 105,
-		.agc2_pt2		= 255,
-		.agc2_slope1	= 54,
-		.agc2_slope2	= 0,
-
-		.alpha_mant		= 28,
-		.alpha_exp		= 26,
-		.beta_mant		= 31,
-		.beta_exp		= 51,
-
-		.perform_agc_softsplit = 0,
-	} , {
-		.band_caps		= BAND_FM | BAND_VHF | BAND_CBAND,
-		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
-		   P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
-		   P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
-		   P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
-		   P_agc_write=0 */
-		.setup			= (0 << 15) | (0 << 14) | (5 << 11)
-			| (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5)
-			| (0 << 4) | (5 << 1) | (0 << 0),
-
-		.inv_gain		= 732,
-		.time_stabiliz  = 10,
-
-		.alpha_level	= 0,
-		.thlock			= 118,
-
-		.wbd_inv		= 0,
-		.wbd_ref		= 1200,
-		.wbd_sel		= 3,
-		.wbd_alpha		= 5,
-
-		.agc1_max		= 65535,
-		.agc1_min		= 0,
-
-		.agc2_max		= 32767,
-		.agc2_min		= 0,
-
-		.agc1_pt1		= 0,
-		.agc1_pt2		= 0,
-		.agc1_pt3		= 98,
-		.agc1_slope1	= 0,
-		.agc1_slope2	= 167,
-		.agc2_pt1		= 98,
-		.agc2_pt2		= 255,
-		.agc2_slope1	= 52,
-		.agc2_slope2	= 0,
-
-		.alpha_mant		= 28,
-		.alpha_exp		= 26,
-		.beta_mant		= 31,
-		.beta_exp		= 51,
-
-		.perform_agc_softsplit = 0,
-	}
-};
-
-static struct dibx000_bandwidth_config dib8096p_clock_config_12_mhz = {
-	108000, 13500,
-	1, 9, 1, 0, 0,
-	0, 0, 0, 0, 2,
-	(3 << 14) | (1 << 12) | (524 << 0),
-	(0 << 25) | 0,
-	20199729,
-	12000000,
-};
-
-static struct dib8000_config tfe8096p_dib8000_config = {
-	.output_mpeg2_in_188_bytes	= 1,
-	.hostbus_diversity			= 1,
-	.update_lna					= NULL,
-
-	.agc_config_count			= 2,
-	.agc						= dib8096p_agc_config,
-	.pll						= &dib8096p_clock_config_12_mhz,
-
-	.gpio_dir					= DIB8000_GPIO_DEFAULT_DIRECTIONS,
-	.gpio_val					= DIB8000_GPIO_DEFAULT_VALUES,
-	.gpio_pwm_pos				= DIB8000_GPIO_DEFAULT_PWM_POS,
-
-	.agc_control				= NULL,
-	.diversity_delay			= 48,
-	.output_mode				= OUTMODE_MPEG2_FIFO,
-	.enMpegOutput				= 1,
-};
-
-static struct dib0090_wbd_slope dib8096p_wbd_table[] = {
-	{ 380, 81, 850, 64, 540, 4},
-	{ 860, 51, 866, 21, 375, 4},
-	{1700, 0, 250, 0, 100, 6},
-	{2600, 0, 250, 0, 100, 6},
-	{ 0xFFFF, 0, 0, 0, 0, 0},
-};
-
-static const struct dib0090_config tfe8096p_dib0090_config = {
-	.io.clock_khz			= 12000,
-	.io.pll_bypass			= 0,
-	.io.pll_range			= 0,
-	.io.pll_prediv			= 3,
-	.io.pll_loopdiv			= 6,
-	.io.adc_clock_ratio		= 0,
-	.io.pll_int_loop_filt	= 0,
-	.reset					= dib8096p_tuner_sleep,
-	.sleep					= dib8096p_tuner_sleep,
-
-	.freq_offset_khz_uhf	= -143,
-	.freq_offset_khz_vhf	= -143,
-
-	.get_adc_power			= dib8090_get_adc_power,
-
-	.clkouttobamse			= 1,
-	.analog_output			= 0,
-
-	.wbd_vhf_offset			= 0,
-	.wbd_cband_offset		= 0,
-	.use_pwm_agc			= 1,
-	.clkoutdrive			= 0,
-
-	.fref_clock_ratio		= 1,
-
-	.wbd					= dib8096p_wbd_table,
-
-	.ls_cfg_pad_drv			= 0,
-	.data_tx_drv			= 0,
-	.low_if					= NULL,
-	.in_soc					= 1,
-	.force_cband_input		= 0,
-};
-
-struct dibx090p_adc {
-	u32 freq;			/* RF freq MHz */
-	u32 timf;			/* New Timf */
-	u32 pll_loopdiv;	/* New prediv */
-	u32 pll_prediv;		/* New loopdiv */
-};
-
-struct dibx090p_adc dib8090p_adc_tab[] = {
-	{ 50000, 17043521, 16, 3}, /* 64 MHz */
-	{878000, 20199729, 9, 1}, /* 60 MHz */
-	{0xffffffff, 0, 0, 0}, /* 60 MHz */
-};
-
-static int dib8096p_agc_startup(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct dib0700_adapter_state *state = adap->priv;
-	struct dibx000_bandwidth_config pll;
-	u16 target;
-	int better_sampling_freq = 0, ret;
-	struct dibx090p_adc *adc_table = &dib8090p_adc_tab[0];
-
-	ret = state->set_param_save(fe);
-	if (ret < 0)
-		return ret;
-	memset(&pll, 0, sizeof(struct dibx000_bandwidth_config));
-
-	dib0090_pwm_gain_reset(fe);
-	/* dib0090_get_wbd_target is returning any possible
-	   temperature compensated wbd-target */
-	target = (dib0090_get_wbd_target(fe) * 8  + 1) / 2;
-	dib8000_set_wbd_ref(fe, target);
-
-
-	while (p->frequency / 1000 > adc_table->freq) {
-		better_sampling_freq = 1;
-		adc_table++;
-	}
-
-	if ((adc_table->freq != 0xffffffff) && better_sampling_freq) {
-		pll.pll_ratio  = adc_table->pll_loopdiv;
-		pll.pll_prediv = adc_table->pll_prediv;
-		dib8000_update_pll(fe, &pll);
-		dib8000_ctrl_timf(fe, DEMOD_TIMF_SET, adc_table->timf);
-	}
-	return 0;
-}
-
-static int tfe8096p_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-
-	dib0700_ctrl_clock(adap->dev, 72, 1);
-
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-
-	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80, 1);
-
-	adap->fe_adap[0].fe = dvb_attach(dib8000_attach,
-			&adap->dev->i2c_adap, 0x80, &tfe8096p_dib8000_config);
-
-	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
-}
-
-static int tfe8096p_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_adapter_state *st = adap->priv;
-	struct i2c_adapter *tun_i2c = dib8096p_get_i2c_tuner(adap->fe_adap[0].fe);
-
-	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c,
-				&tfe8096p_dib0090_config) == NULL)
-		return -ENODEV;
-
-	dib8000_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
-
-	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
-	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096p_agc_startup;
-	return 0;
-}
-
-/* STK9090M */
-static int dib90x0_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
-{
-	return dib9000_fw_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
-}
-
-static int dib90x0_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
-{
-	return dib9000_fw_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
-}
-
-static int dib90x0_tuner_reset(struct dvb_frontend *fe, int onoff)
-{
-	return dib9000_set_gpio(fe, 5, 0, !onoff);
-}
-
-static int dib90x0_tuner_sleep(struct dvb_frontend *fe, int onoff)
-{
-	return dib9000_set_gpio(fe, 0, 0, onoff);
-}
-
-static int dib01x0_pmu_update(struct i2c_adapter *i2c, u16 *data, u8 len)
-{
-	u8 wb[4] = { 0xc >> 8, 0xc & 0xff, 0, 0 };
-	u8 rb[2];
-	struct i2c_msg msg[2] = {
-		{.addr = 0x1e >> 1, .flags = 0, .buf = wb, .len = 2},
-		{.addr = 0x1e >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2},
-	};
-	u8 index_data;
-
-	dibx000_i2c_set_speed(i2c, 250);
-
-	if (i2c_transfer(i2c, msg, 2) != 2)
-		return -EIO;
-
-	switch (rb[0] << 8 | rb[1]) {
-	case 0:
-			deb_info("Found DiB0170 rev1: This version of DiB0170 is not supported any longer.\n");
-			return -EIO;
-	case 1:
-			deb_info("Found DiB0170 rev2");
-			break;
-	case 2:
-			deb_info("Found DiB0190 rev2");
-			break;
-	default:
-			deb_info("DiB01x0 not found");
-			return -EIO;
-	}
-
-	for (index_data = 0; index_data < len; index_data += 2) {
-		wb[2] = (data[index_data + 1] >> 8) & 0xff;
-		wb[3] = (data[index_data + 1]) & 0xff;
-
-		if (data[index_data] == 0) {
-			wb[0] = (data[index_data] >> 8) & 0xff;
-			wb[1] = (data[index_data]) & 0xff;
-			msg[0].len = 2;
-			if (i2c_transfer(i2c, msg, 2) != 2)
-				return -EIO;
-			wb[2] |= rb[0];
-			wb[3] |= rb[1] & ~(3 << 4);
-		}
-
-		wb[0] = (data[index_data] >> 8)&0xff;
-		wb[1] = (data[index_data])&0xff;
-		msg[0].len = 4;
-		if (i2c_transfer(i2c, &msg[0], 1) != 1)
-			return -EIO;
-	}
-	return 0;
-}
-
-static struct dib9000_config stk9090m_config = {
-	.output_mpeg2_in_188_bytes = 1,
-	.output_mode = OUTMODE_MPEG2_FIFO,
-	.vcxo_timer = 279620,
-	.timing_frequency = 20452225,
-	.demod_clock_khz = 60000,
-	.xtal_clock_khz = 30000,
-	.if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
-	.subband = {
-		2,
-		{
-			{ 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0008 } }, /* GPIO 3 to 1 for VHF */
-			{ 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0000 } }, /* GPIO 3 to 0 for UHF */
-			{ 0 },
-		},
-	},
-	.gpio_function = {
-		{ .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 },
-		{ .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 },
-	},
-};
-
-static struct dib9000_config nim9090md_config[2] = {
-	{
-		.output_mpeg2_in_188_bytes = 1,
-		.output_mode = OUTMODE_MPEG2_FIFO,
-		.vcxo_timer = 279620,
-		.timing_frequency = 20452225,
-		.demod_clock_khz = 60000,
-		.xtal_clock_khz = 30000,
-		.if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
-	}, {
-		.output_mpeg2_in_188_bytes = 1,
-		.output_mode = OUTMODE_DIVERSITY,
-		.vcxo_timer = 279620,
-		.timing_frequency = 20452225,
-		.demod_clock_khz = 60000,
-		.xtal_clock_khz = 30000,
-		.if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
-		.subband = {
-			2,
-			{
-				{ 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0006 } }, /* GPIO 1 and 2 to 1 for VHF */
-				{ 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0000 } }, /* GPIO 1 and 2 to 0 for UHF */
-				{ 0 },
-			},
-		},
-		.gpio_function = {
-			{ .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 },
-			{ .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 },
-		},
-	}
-};
-
-static struct dib0090_config dib9090_dib0090_config = {
-	.io.pll_bypass = 0,
-	.io.pll_range = 1,
-	.io.pll_prediv = 1,
-	.io.pll_loopdiv = 8,
-	.io.adc_clock_ratio = 8,
-	.io.pll_int_loop_filt = 0,
-	.io.clock_khz = 30000,
-	.reset = dib90x0_tuner_reset,
-	.sleep = dib90x0_tuner_sleep,
-	.clkouttobamse = 0,
-	.analog_output = 0,
-	.use_pwm_agc = 0,
-	.clkoutdrive = 0,
-	.freq_offset_khz_uhf = 0,
-	.freq_offset_khz_vhf = 0,
-};
-
-static struct dib0090_config nim9090md_dib0090_config[2] = {
-	{
-		.io.pll_bypass = 0,
-		.io.pll_range = 1,
-		.io.pll_prediv = 1,
-		.io.pll_loopdiv = 8,
-		.io.adc_clock_ratio = 8,
-		.io.pll_int_loop_filt = 0,
-		.io.clock_khz = 30000,
-		.reset = dib90x0_tuner_reset,
-		.sleep = dib90x0_tuner_sleep,
-		.clkouttobamse = 1,
-		.analog_output = 0,
-		.use_pwm_agc = 0,
-		.clkoutdrive = 0,
-		.freq_offset_khz_uhf = 0,
-		.freq_offset_khz_vhf = 0,
-	}, {
-		.io.pll_bypass = 0,
-		.io.pll_range = 1,
-		.io.pll_prediv = 1,
-		.io.pll_loopdiv = 8,
-		.io.adc_clock_ratio = 8,
-		.io.pll_int_loop_filt = 0,
-		.io.clock_khz = 30000,
-		.reset = dib90x0_tuner_reset,
-		.sleep = dib90x0_tuner_sleep,
-		.clkouttobamse = 0,
-		.analog_output = 0,
-		.use_pwm_agc = 0,
-		.clkoutdrive = 0,
-		.freq_offset_khz_uhf = 0,
-		.freq_offset_khz_vhf = 0,
-	}
-};
-
-
-static int stk9090m_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_adapter_state *state = adap->priv;
-	struct dib0700_state *st = adap->dev->priv;
-	u32 fw_version;
-
-	/* Make use of the new i2c functions from FW 1.20 */
-	dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
-	if (fw_version >= 0x10200)
-		st->fw_use_new_i2c_api = 1;
-	dib0700_set_i2c_speed(adap->dev, 340);
-
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-
-	dib0700_ctrl_clock(adap->dev, 72, 1);
-
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-
-	dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80);
-
-	if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) {
-		deb_info("%s: Upload failed. (file not found?)\n", __func__);
-		return -ENODEV;
-	} else {
-		deb_info("%s: firmware read %Zu bytes.\n", __func__, state->frontend_firmware->size);
-	}
-	stk9090m_config.microcode_B_fe_size = state->frontend_firmware->size;
-	stk9090m_config.microcode_B_fe_buffer = state->frontend_firmware->data;
-
-	adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &stk9090m_config);
-
-	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
-}
-
-static int dib9090_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_adapter_state *state = adap->priv;
-	struct i2c_adapter *i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe);
-	u16 data_dib190[10] = {
-		1, 0x1374,
-		2, 0x01a2,
-		7, 0x0020,
-		0, 0x00ef,
-		8, 0x0486,
-	};
-
-	if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &dib9090_dib0090_config) == NULL)
-		return -ENODEV;
-	i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
-	if (dib01x0_pmu_update(i2c, data_dib190, 10) != 0)
-		return -ENODEV;
-	dib0700_set_i2c_speed(adap->dev, 1500);
-	if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0)
-		return -ENODEV;
-	release_firmware(state->frontend_firmware);
-	return 0;
-}
-
-static int nim9090md_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_adapter_state *state = adap->priv;
-	struct dib0700_state *st = adap->dev->priv;
-	struct i2c_adapter *i2c;
-	struct dvb_frontend *fe_slave;
-	u32 fw_version;
-
-	/* Make use of the new i2c functions from FW 1.20 */
-	dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
-	if (fw_version >= 0x10200)
-		st->fw_use_new_i2c_api = 1;
-	dib0700_set_i2c_speed(adap->dev, 340);
-
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-
-	dib0700_ctrl_clock(adap->dev, 72, 1);
-
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-
-	if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) {
-		deb_info("%s: Upload failed. (file not found?)\n", __func__);
-		return -EIO;
-	} else {
-		deb_info("%s: firmware read %Zu bytes.\n", __func__, state->frontend_firmware->size);
-	}
-	nim9090md_config[0].microcode_B_fe_size = state->frontend_firmware->size;
-	nim9090md_config[0].microcode_B_fe_buffer = state->frontend_firmware->data;
-	nim9090md_config[1].microcode_B_fe_size = state->frontend_firmware->size;
-	nim9090md_config[1].microcode_B_fe_buffer = state->frontend_firmware->data;
-
-	dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, 0x80);
-	adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &nim9090md_config[0]);
-
-	if (adap->fe_adap[0].fe == NULL)
-		return -ENODEV;
-
-	i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_3_4, 0);
-	dib9000_i2c_enumeration(i2c, 1, 0x12, 0x82);
-
-	fe_slave = dvb_attach(dib9000_attach, i2c, 0x82, &nim9090md_config[1]);
-	dib9000_set_slave_frontend(adap->fe_adap[0].fe, fe_slave);
-
-	return fe_slave == NULL ?  -ENODEV : 0;
-}
-
-static int nim9090md_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_adapter_state *state = adap->priv;
-	struct i2c_adapter *i2c;
-	struct dvb_frontend *fe_slave;
-	u16 data_dib190[10] = {
-		1, 0x5374,
-		2, 0x01ae,
-		7, 0x0020,
-		0, 0x00ef,
-		8, 0x0406,
-	};
-	i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe);
-	if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &nim9090md_dib0090_config[0]) == NULL)
-		return -ENODEV;
-	i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
-	if (dib01x0_pmu_update(i2c, data_dib190, 10) < 0)
-		return -ENODEV;
-
-	dib0700_set_i2c_speed(adap->dev, 1500);
-	if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0)
-		return -ENODEV;
-
-	fe_slave = dib9000_get_slave_frontend(adap->fe_adap[0].fe, 1);
-	if (fe_slave != NULL) {
-		i2c = dib9000_get_component_bus_interface(adap->fe_adap[0].fe);
-		dib9000_set_i2c_adapter(fe_slave, i2c);
-
-		i2c = dib9000_get_tuner_interface(fe_slave);
-		if (dvb_attach(dib0090_fw_register, fe_slave, i2c, &nim9090md_dib0090_config[1]) == NULL)
-			return -ENODEV;
-		fe_slave->dvb = adap->fe_adap[0].fe->dvb;
-		dib9000_fw_set_component_bus_speed(adap->fe_adap[0].fe, 1500);
-		if (dib9000_firmware_post_pll_init(fe_slave) < 0)
-			return -ENODEV;
-	}
-	release_firmware(state->frontend_firmware);
-
-	return 0;
-}
-
-/* NIM7090 */
-struct dib7090p_best_adc {
-	u32 timf;
-	u32 pll_loopdiv;
-	u32 pll_prediv;
-};
-
-static int dib7090p_get_best_sampling(struct dvb_frontend *fe , struct dib7090p_best_adc *adc)
-{
-	u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1;
-
-	u16 xtal = 12000;
-	u32 fcp_min = 1900;  /* PLL Minimum Frequency comparator KHz */
-	u32 fcp_max = 20000; /* PLL Maximum Frequency comparator KHz */
-	u32 fdem_max = 76000;
-	u32 fdem_min = 69500;
-	u32 fcp = 0, fs = 0, fdem = 0;
-	u32 harmonic_id = 0;
-
-	adc->pll_loopdiv = loopdiv;
-	adc->pll_prediv = prediv;
-	adc->timf = 0;
-
-	deb_info("bandwidth = %d fdem_min =%d", fe->dtv_property_cache.bandwidth_hz, fdem_min);
-
-	/* Find Min and Max prediv */
-	while ((xtal/max_prediv) >= fcp_min)
-		max_prediv++;
-
-	max_prediv--;
-	min_prediv = max_prediv;
-	while ((xtal/min_prediv) <= fcp_max) {
-		min_prediv--;
-		if (min_prediv == 1)
-			break;
-	}
-	deb_info("MIN prediv = %d : MAX prediv = %d", min_prediv, max_prediv);
-
-	min_prediv = 2;
-
-	for (prediv = min_prediv ; prediv < max_prediv; prediv++) {
-		fcp = xtal / prediv;
-		if (fcp > fcp_min && fcp < fcp_max) {
-			for (loopdiv = 1 ; loopdiv < 64 ; loopdiv++) {
-				fdem = ((xtal/prediv) * loopdiv);
-				fs   = fdem / 4;
-				/* test min/max system restrictions */
-
-				if ((fdem >= fdem_min) && (fdem <= fdem_max) && (fs >= fe->dtv_property_cache.bandwidth_hz/1000)) {
-					spur = 0;
-					/* test fs harmonics positions */
-					for (harmonic_id = (fe->dtv_property_cache.frequency / (1000*fs)) ;  harmonic_id <= ((fe->dtv_property_cache.frequency / (1000*fs))+1) ; harmonic_id++) {
-						if (((fs*harmonic_id) >= ((fe->dtv_property_cache.frequency/1000) - (fe->dtv_property_cache.bandwidth_hz/2000))) &&  ((fs*harmonic_id) <= ((fe->dtv_property_cache.frequency/1000) + (fe->dtv_property_cache.bandwidth_hz/2000)))) {
-							spur = 1;
-							break;
-						}
-					}
-
-					if (!spur) {
-						adc->pll_loopdiv = loopdiv;
-						adc->pll_prediv = prediv;
-						adc->timf = 2396745143UL/fdem*(1 << 9);
-						adc->timf += ((2396745143UL%fdem) << 9)/fdem;
-						deb_info("loopdiv=%i prediv=%i timf=%i", loopdiv, prediv, adc->timf);
-						break;
-					}
-				}
-			}
-		}
-		if (!spur)
-			break;
-	}
-
-
-	if (adc->pll_loopdiv == 0 && adc->pll_prediv == 0)
-		return -EINVAL;
-	else
-		return 0;
-}
-
-static int dib7090_agc_startup(struct dvb_frontend *fe)
-{
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct dib0700_adapter_state *state = adap->priv;
-	struct dibx000_bandwidth_config pll;
-	u16 target;
-	struct dib7090p_best_adc adc;
-	int ret;
-
-	ret = state->set_param_save(fe);
-	if (ret < 0)
-		return ret;
-
-	memset(&pll, 0, sizeof(struct dibx000_bandwidth_config));
-	dib0090_pwm_gain_reset(fe);
-	target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2;
-	dib7000p_set_wbd_ref(fe, target);
-
-	if (dib7090p_get_best_sampling(fe, &adc) == 0) {
-		pll.pll_ratio  = adc.pll_loopdiv;
-		pll.pll_prediv = adc.pll_prediv;
-
-		dib7000p_update_pll(fe, &pll);
-		dib7000p_ctrl_timf(fe, DEMOD_TIMF_SET, adc.timf);
-	}
-	return 0;
-}
-
-static int dib7090_agc_restart(struct dvb_frontend *fe, u8 restart)
-{
-	deb_info("AGC restart callback: %d", restart);
-	if (restart == 0) /* before AGC startup */
-		dib0090_set_dc_servo(fe, 1);
-	return 0;
-}
-
-static int dib7090e_update_lna(struct dvb_frontend *fe, u16 agc_global)
-{
-	u16 agc1 = 0, agc2, wbd = 0, wbd_target, wbd_offset, threshold_agc1;
-	s16 wbd_delta;
-
-	if ((fe->dtv_property_cache.frequency) < 400000000)
-		threshold_agc1 = 25000;
-	else
-		threshold_agc1 = 30000;
-
-	wbd_target = (dib0090_get_wbd_target(fe)*8+1)/2;
-	wbd_offset = dib0090_get_wbd_offset(fe);
-	dib7000p_get_agc_values(fe, NULL, &agc1, &agc2, &wbd);
-	wbd_delta = (s16)wbd - (((s16)wbd_offset+10)*4) ;
-
-	deb_info("update lna, agc_global=%d agc1=%d agc2=%d",
-			agc_global, agc1, agc2);
-	deb_info("update lna, wbd=%d wbd target=%d wbd offset=%d wbd delta=%d",
-			wbd, wbd_target, wbd_offset, wbd_delta);
-
-	if ((agc1 < threshold_agc1) && (wbd_delta > 0)) {
-		dib0090_set_switch(fe, 1, 1, 1);
-		dib0090_set_vga(fe, 0);
-		dib0090_update_rframp_7090(fe, 0);
-		dib0090_update_tuning_table_7090(fe, 0);
-	} else {
-		dib0090_set_vga(fe, 1);
-		dib0090_update_rframp_7090(fe, 1);
-		dib0090_update_tuning_table_7090(fe, 1);
-		dib0090_set_switch(fe, 0, 0, 0);
-	}
-
-	return 0;
-}
-
-static struct dib0090_wbd_slope dib7090_wbd_table[] = {
-	{ 380,   81, 850, 64, 540,  4},
-	{ 860,   51, 866, 21,  375, 4},
-	{1700,    0, 250, 0,   100, 6},
-	{2600,    0, 250, 0,   100, 6},
-	{ 0xFFFF, 0,   0, 0,   0,   0},
-};
-
-static struct dib0090_wbd_slope dib7090e_wbd_table[] = {
-	{ 380,   81, 850, 64, 540,	4},
-	{ 700,   51, 866, 21,  320,	4},
-	{ 860,   48, 666, 18,  330,	6},
-	{1700,    0, 250, 0,   100, 6},
-	{2600,    0, 250, 0,   100, 6},
-	{ 0xFFFF, 0,   0, 0,   0,	0},
-};
-
-static struct dibx000_agc_config dib7090_agc_config[2] = {
-	{
-		.band_caps      = BAND_UHF,
-		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
-		* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
-		.setup          = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
-
-		.inv_gain       = 687,
-		.time_stabiliz  = 10,
-
-		.alpha_level    = 0,
-		.thlock         = 118,
-
-		.wbd_inv        = 0,
-		.wbd_ref        = 1200,
-		.wbd_sel        = 3,
-		.wbd_alpha      = 5,
-
-		.agc1_max       = 65535,
-		.agc1_min       = 0,
-
-		.agc2_max       = 65535,
-		.agc2_min       = 0,
-
-		.agc1_pt1       = 0,
-		.agc1_pt2       = 32,
-		.agc1_pt3       = 114,
-		.agc1_slope1    = 143,
-		.agc1_slope2    = 144,
-		.agc2_pt1       = 114,
-		.agc2_pt2       = 227,
-		.agc2_slope1    = 116,
-		.agc2_slope2    = 117,
-
-		.alpha_mant     = 18,
-		.alpha_exp      = 0,
-		.beta_mant      = 20,
-		.beta_exp       = 59,
-
-		.perform_agc_softsplit = 0,
-	} , {
-		.band_caps      = BAND_FM | BAND_VHF | BAND_CBAND,
-		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
-		* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
-		.setup          = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
-
-		.inv_gain       = 732,
-		.time_stabiliz  = 10,
-
-		.alpha_level    = 0,
-		.thlock         = 118,
-
-		.wbd_inv        = 0,
-		.wbd_ref        = 1200,
-		.wbd_sel        = 3,
-		.wbd_alpha      = 5,
-
-		.agc1_max       = 65535,
-		.agc1_min       = 0,
-
-		.agc2_max       = 65535,
-		.agc2_min       = 0,
-
-		.agc1_pt1       = 0,
-		.agc1_pt2       = 0,
-		.agc1_pt3       = 98,
-		.agc1_slope1    = 0,
-		.agc1_slope2    = 167,
-		.agc2_pt1       = 98,
-		.agc2_pt2       = 255,
-		.agc2_slope1    = 104,
-		.agc2_slope2    = 0,
-
-		.alpha_mant     = 18,
-		.alpha_exp      = 0,
-		.beta_mant      = 20,
-		.beta_exp       = 59,
-
-		.perform_agc_softsplit = 0,
-	}
-};
-
-static struct dibx000_bandwidth_config dib7090_clock_config_12_mhz = {
-	60000, 15000,
-	1, 5, 0, 0, 0,
-	0, 0, 1, 1, 2,
-	(3 << 14) | (1 << 12) | (524 << 0),
-	(0 << 25) | 0,
-	20452225,
-	15000000,
-};
-
-static struct dib7000p_config nim7090_dib7000p_config = {
-	.output_mpeg2_in_188_bytes  = 1,
-	.hostbus_diversity			= 1,
-	.tuner_is_baseband			= 1,
-	.update_lna					= NULL,
-
-	.agc_config_count			= 2,
-	.agc						= dib7090_agc_config,
-
-	.bw							= &dib7090_clock_config_12_mhz,
-
-	.gpio_dir					= DIB7000P_GPIO_DEFAULT_DIRECTIONS,
-	.gpio_val					= DIB7000P_GPIO_DEFAULT_VALUES,
-	.gpio_pwm_pos				= DIB7000P_GPIO_DEFAULT_PWM_POS,
-
-	.pwm_freq_div				= 0,
-
-	.agc_control				= dib7090_agc_restart,
-
-	.spur_protect				= 0,
-	.disable_sample_and_hold	= 0,
-	.enable_current_mirror		= 0,
-	.diversity_delay			= 0,
-
-	.output_mode				= OUTMODE_MPEG2_FIFO,
-	.enMpegOutput				= 1,
-};
-
-static struct dib7000p_config tfe7090pvr_dib7000p_config[2] = {
-	{
-		.output_mpeg2_in_188_bytes  = 1,
-		.hostbus_diversity			= 1,
-		.tuner_is_baseband			= 1,
-		.update_lna					= NULL,
-
-		.agc_config_count			= 2,
-		.agc						= dib7090_agc_config,
-
-		.bw							= &dib7090_clock_config_12_mhz,
-
-		.gpio_dir					= DIB7000P_GPIO_DEFAULT_DIRECTIONS,
-		.gpio_val					= DIB7000P_GPIO_DEFAULT_VALUES,
-		.gpio_pwm_pos				= DIB7000P_GPIO_DEFAULT_PWM_POS,
-
-		.pwm_freq_div				= 0,
-
-		.agc_control				= dib7090_agc_restart,
-
-		.spur_protect				= 0,
-		.disable_sample_and_hold	= 0,
-		.enable_current_mirror		= 0,
-		.diversity_delay			= 0,
-
-		.output_mode				= OUTMODE_MPEG2_PAR_GATED_CLK,
-		.default_i2c_addr			= 0x90,
-		.enMpegOutput				= 1,
-	}, {
-		.output_mpeg2_in_188_bytes  = 1,
-		.hostbus_diversity			= 1,
-		.tuner_is_baseband			= 1,
-		.update_lna					= NULL,
-
-		.agc_config_count			= 2,
-		.agc						= dib7090_agc_config,
-
-		.bw							= &dib7090_clock_config_12_mhz,
-
-		.gpio_dir					= DIB7000P_GPIO_DEFAULT_DIRECTIONS,
-		.gpio_val					= DIB7000P_GPIO_DEFAULT_VALUES,
-		.gpio_pwm_pos				= DIB7000P_GPIO_DEFAULT_PWM_POS,
-
-		.pwm_freq_div				= 0,
-
-		.agc_control				= dib7090_agc_restart,
-
-		.spur_protect				= 0,
-		.disable_sample_and_hold	= 0,
-		.enable_current_mirror		= 0,
-		.diversity_delay			= 0,
-
-		.output_mode				= OUTMODE_MPEG2_PAR_GATED_CLK,
-		.default_i2c_addr			= 0x92,
-		.enMpegOutput				= 0,
-	}
-};
-
-static struct dib7000p_config tfe7090e_dib7000p_config = {
-	.output_mpeg2_in_188_bytes  = 1,
-	.hostbus_diversity			= 1,
-	.tuner_is_baseband			= 1,
-	.update_lna					= dib7090e_update_lna,
-
-	.agc_config_count			= 2,
-	.agc						= dib7090_agc_config,
-
-	.bw							= &dib7090_clock_config_12_mhz,
-
-	.gpio_dir					= DIB7000P_GPIO_DEFAULT_DIRECTIONS,
-	.gpio_val					= DIB7000P_GPIO_DEFAULT_VALUES,
-	.gpio_pwm_pos				= DIB7000P_GPIO_DEFAULT_PWM_POS,
-
-	.pwm_freq_div				= 0,
-
-	.agc_control				= dib7090_agc_restart,
-
-	.spur_protect				= 0,
-	.disable_sample_and_hold	= 0,
-	.enable_current_mirror		= 0,
-	.diversity_delay			= 0,
-
-	.output_mode				= OUTMODE_MPEG2_FIFO,
-	.enMpegOutput				= 1,
-};
-
-static const struct dib0090_config nim7090_dib0090_config = {
-	.io.clock_khz = 12000,
-	.io.pll_bypass = 0,
-	.io.pll_range = 0,
-	.io.pll_prediv = 3,
-	.io.pll_loopdiv = 6,
-	.io.adc_clock_ratio = 0,
-	.io.pll_int_loop_filt = 0,
-	.reset = dib7090_tuner_sleep,
-	.sleep = dib7090_tuner_sleep,
-
-	.freq_offset_khz_uhf = 0,
-	.freq_offset_khz_vhf = 0,
-
-	.get_adc_power = dib7090_get_adc_power,
-
-	.clkouttobamse = 1,
-	.analog_output = 0,
-
-	.wbd_vhf_offset = 0,
-	.wbd_cband_offset = 0,
-	.use_pwm_agc = 1,
-	.clkoutdrive = 0,
-
-	.fref_clock_ratio = 0,
-
-	.wbd = dib7090_wbd_table,
-
-	.ls_cfg_pad_drv = 0,
-	.data_tx_drv = 0,
-	.low_if = NULL,
-	.in_soc = 1,
-};
-
-static const struct dib0090_config tfe7090e_dib0090_config = {
-	.io.clock_khz = 12000,
-	.io.pll_bypass = 0,
-	.io.pll_range = 0,
-	.io.pll_prediv = 3,
-	.io.pll_loopdiv = 6,
-	.io.adc_clock_ratio = 0,
-	.io.pll_int_loop_filt = 0,
-	.reset = dib7090_tuner_sleep,
-	.sleep = dib7090_tuner_sleep,
-
-	.freq_offset_khz_uhf = 0,
-	.freq_offset_khz_vhf = 0,
-
-	.get_adc_power = dib7090_get_adc_power,
-
-	.clkouttobamse = 1,
-	.analog_output = 0,
-
-	.wbd_vhf_offset = 0,
-	.wbd_cband_offset = 0,
-	.use_pwm_agc = 1,
-	.clkoutdrive = 0,
-
-	.fref_clock_ratio = 0,
-
-	.wbd = dib7090e_wbd_table,
-
-	.ls_cfg_pad_drv = 0,
-	.data_tx_drv = 0,
-	.low_if = NULL,
-	.in_soc = 1,
-	.force_cband_input = 1,
-	.is_dib7090e = 1,
-};
-
-static struct dib7000p_config tfe7790e_dib7000p_config = {
-	.output_mpeg2_in_188_bytes  = 1,
-	.hostbus_diversity			= 1,
-	.tuner_is_baseband			= 1,
-	.update_lna					= dib7090e_update_lna,
-
-	.agc_config_count			= 2,
-	.agc						= dib7090_agc_config,
-
-	.bw							= &dib7090_clock_config_12_mhz,
-
-	.gpio_dir					= DIB7000P_GPIO_DEFAULT_DIRECTIONS,
-	.gpio_val					= DIB7000P_GPIO_DEFAULT_VALUES,
-	.gpio_pwm_pos				= DIB7000P_GPIO_DEFAULT_PWM_POS,
-
-	.pwm_freq_div				= 0,
-
-	.agc_control				= dib7090_agc_restart,
-
-	.spur_protect				= 0,
-	.disable_sample_and_hold	= 0,
-	.enable_current_mirror		= 0,
-	.diversity_delay			= 0,
-
-	.output_mode				= OUTMODE_MPEG2_PAR_GATED_CLK,
-	.enMpegOutput				= 1,
-};
-
-static const struct dib0090_config tfe7790e_dib0090_config = {
-	.io.clock_khz = 12000,
-	.io.pll_bypass = 0,
-	.io.pll_range = 0,
-	.io.pll_prediv = 3,
-	.io.pll_loopdiv = 6,
-	.io.adc_clock_ratio = 0,
-	.io.pll_int_loop_filt = 0,
-	.reset = dib7090_tuner_sleep,
-	.sleep = dib7090_tuner_sleep,
-
-	.freq_offset_khz_uhf = 0,
-	.freq_offset_khz_vhf = 0,
-
-	.get_adc_power = dib7090_get_adc_power,
-
-	.clkouttobamse = 1,
-	.analog_output = 0,
-
-	.wbd_vhf_offset = 0,
-	.wbd_cband_offset = 0,
-	.use_pwm_agc = 1,
-	.clkoutdrive = 0,
-
-	.fref_clock_ratio = 0,
-
-	.wbd = dib7090e_wbd_table,
-
-	.ls_cfg_pad_drv = 0,
-	.data_tx_drv = 0,
-	.low_if = NULL,
-	.in_soc = 1,
-	.force_cband_input = 1,
-	.is_dib7090e = 1,
-	.force_crystal_mode = 1,
-};
-
-static const struct dib0090_config tfe7090pvr_dib0090_config[2] = {
-	{
-		.io.clock_khz = 12000,
-		.io.pll_bypass = 0,
-		.io.pll_range = 0,
-		.io.pll_prediv = 3,
-		.io.pll_loopdiv = 6,
-		.io.adc_clock_ratio = 0,
-		.io.pll_int_loop_filt = 0,
-		.reset = dib7090_tuner_sleep,
-		.sleep = dib7090_tuner_sleep,
-
-		.freq_offset_khz_uhf = 50,
-		.freq_offset_khz_vhf = 70,
-
-		.get_adc_power = dib7090_get_adc_power,
-
-		.clkouttobamse = 1,
-		.analog_output = 0,
-
-		.wbd_vhf_offset = 0,
-		.wbd_cband_offset = 0,
-		.use_pwm_agc = 1,
-		.clkoutdrive = 0,
-
-		.fref_clock_ratio = 0,
-
-		.wbd = dib7090_wbd_table,
-
-		.ls_cfg_pad_drv = 0,
-		.data_tx_drv = 0,
-		.low_if = NULL,
-		.in_soc = 1,
-	}, {
-		.io.clock_khz = 12000,
-		.io.pll_bypass = 0,
-		.io.pll_range = 0,
-		.io.pll_prediv = 3,
-		.io.pll_loopdiv = 6,
-		.io.adc_clock_ratio = 0,
-		.io.pll_int_loop_filt = 0,
-		.reset = dib7090_tuner_sleep,
-		.sleep = dib7090_tuner_sleep,
-
-		.freq_offset_khz_uhf = -50,
-		.freq_offset_khz_vhf = -70,
-
-		.get_adc_power = dib7090_get_adc_power,
-
-		.clkouttobamse = 1,
-		.analog_output = 0,
-
-		.wbd_vhf_offset = 0,
-		.wbd_cband_offset = 0,
-		.use_pwm_agc = 1,
-		.clkoutdrive = 0,
-
-		.fref_clock_ratio = 0,
-
-		.wbd = dib7090_wbd_table,
-
-		.ls_cfg_pad_drv = 0,
-		.data_tx_drv = 0,
-		.low_if = NULL,
-		.in_soc = 1,
-	}
-};
-
-static int nim7090_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-
-	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, &nim7090_dib7000p_config) != 0) {
-		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n", __func__);
-		return -ENODEV;
-	}
-	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &nim7090_dib7000p_config);
-
-	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
-}
-
-static int nim7090_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_adapter_state *st = adap->priv;
-	struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe);
-
-	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &nim7090_dib0090_config) == NULL)
-		return -ENODEV;
-
-	dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
-
-	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
-	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
-	return 0;
-}
-
-static int tfe7090pvr_frontend0_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_state *st = adap->dev->priv;
-
-	/* The TFE7090 requires the dib0700 to not be in master mode */
-	st->disable_streaming_master_mode = 1;
-
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-
-	/* initialize IC 0 */
-	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, &tfe7090pvr_dib7000p_config[0]) != 0) {
-		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n", __func__);
-		return -ENODEV;
-	}
-
-	dib0700_set_i2c_speed(adap->dev, 340);
-	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x90, &tfe7090pvr_dib7000p_config[0]);
-	if (adap->fe_adap[0].fe == NULL)
-		return -ENODEV;
-
-	dib7090_slave_reset(adap->fe_adap[0].fe);
-
-	return 0;
-}
-
-static int tfe7090pvr_frontend1_attach(struct dvb_usb_adapter *adap)
-{
-	struct i2c_adapter *i2c;
-
-	if (adap->dev->adapter[0].fe_adap[0].fe == NULL) {
-		err("the master dib7090 has to be initialized first");
-		return -ENODEV; /* the master device has not been initialized */
-	}
-
-	i2c = dib7000p_get_i2c_master(adap->dev->adapter[0].fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_6_7, 1);
-	if (dib7000p_i2c_enumeration(i2c, 1, 0x10, &tfe7090pvr_dib7000p_config[1]) != 0) {
-		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n", __func__);
-		return -ENODEV;
-	}
-
-	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, i2c, 0x92, &tfe7090pvr_dib7000p_config[1]);
-	dib0700_set_i2c_speed(adap->dev, 200);
-
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-static int tfe7090pvr_tuner0_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_adapter_state *st = adap->priv;
-	struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe);
-
-	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[0]) == NULL)
-		return -ENODEV;
-
-	dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
-
-	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
-	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
-	return 0;
-}
-
-static int tfe7090pvr_tuner1_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_adapter_state *st = adap->priv;
-	struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe);
-
-	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[1]) == NULL)
-		return -ENODEV;
-
-	dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
-
-	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
-	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
-	return 0;
-}
-
-static int tfe7090e_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-
-	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap,
-				1, 0x10, &tfe7090e_dib7000p_config) != 0) {
-		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
-				__func__);
-		return -ENODEV;
-	}
-	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,
-			0x80, &tfe7090e_dib7000p_config);
-
-	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
-}
-
-static int tfe7790e_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_state *st = adap->dev->priv;
-
-	/* The TFE7790E requires the dib0700 to not be in master mode */
-	st->disable_streaming_master_mode = 1;
-
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-	msleep(20);
-	dib0700_ctrl_clock(adap->dev, 72, 1);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-	msleep(20);
-	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-
-	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap,
-				1, 0x10, &tfe7790e_dib7000p_config) != 0) {
-		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
-				__func__);
-		return -ENODEV;
-	}
-	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,
-			0x80, &tfe7790e_dib7000p_config);
-
-	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
-}
-
-static int tfe7790e_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_adapter_state *st = adap->priv;
-	struct i2c_adapter *tun_i2c =
-		dib7090_get_i2c_tuner(adap->fe_adap[0].fe);
-
-	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c,
-				&tfe7790e_dib0090_config) == NULL)
-		return -ENODEV;
-
-	dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
-
-	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
-	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
-	return 0;
-}
-
-static int tfe7090e_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_adapter_state *st = adap->priv;
-	struct i2c_adapter *tun_i2c =
-		dib7090_get_i2c_tuner(adap->fe_adap[0].fe);
-
-	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c,
-				&tfe7090e_dib0090_config) == NULL)
-		return -ENODEV;
-
-	dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
-
-	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
-	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
-	return 0;
-}
-
-/* STK7070PD */
-static struct dib7000p_config stk7070pd_dib7000p_config[2] = {
-	{
-		.output_mpeg2_in_188_bytes = 1,
-
-		.agc_config_count = 1,
-		.agc = &dib7070_agc_config,
-		.bw  = &dib7070_bw_config_12_mhz,
-		.tuner_is_baseband = 1,
-		.spur_protect = 1,
-
-		.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
-		.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
-		.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
-
-		.hostbus_diversity = 1,
-	}, {
-		.output_mpeg2_in_188_bytes = 1,
-
-		.agc_config_count = 1,
-		.agc = &dib7070_agc_config,
-		.bw  = &dib7070_bw_config_12_mhz,
-		.tuner_is_baseband = 1,
-		.spur_protect = 1,
-
-		.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
-		.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
-		.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
-
-		.hostbus_diversity = 1,
-	}
-};
-
-static void stk7070pd_init(struct dvb_usb_device *dev)
-{
-	dib0700_set_gpio(dev, GPIO6, GPIO_OUT, 1);
-	msleep(10);
-	dib0700_set_gpio(dev, GPIO9, GPIO_OUT, 1);
-	dib0700_set_gpio(dev, GPIO4, GPIO_OUT, 1);
-	dib0700_set_gpio(dev, GPIO7, GPIO_OUT, 1);
-	dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 0);
-
-	dib0700_ctrl_clock(dev, 72, 1);
-
-	msleep(10);
-	dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 1);
-}
-
-static int stk7070pd_frontend_attach0(struct dvb_usb_adapter *adap)
-{
-	stk7070pd_init(adap->dev);
-
-	msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-
-	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
-				     stk7070pd_dib7000p_config) != 0) {
-		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
-		    __func__);
-		return -ENODEV;
-	}
-
-	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]);
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap)
-{
-	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]);
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-static int novatd_read_status_override(struct dvb_frontend *fe,
-		fe_status_t *stat)
-{
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct dvb_usb_device *dev = adap->dev;
-	struct dib0700_state *state = dev->priv;
-	int ret;
-
-	ret = state->read_status(fe, stat);
-
-	if (!ret)
-		dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT,
-				!!(*stat & FE_HAS_LOCK));
-
-	return ret;
-}
-
-static int novatd_sleep_override(struct dvb_frontend* fe)
-{
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct dvb_usb_device *dev = adap->dev;
-	struct dib0700_state *state = dev->priv;
-
-	/* turn off LED */
-	dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT, 0);
-
-	return state->sleep(fe);
-}
-
-/**
- * novatd_frontend_attach - Nova-TD specific attach
- *
- * Nova-TD has GPIO0, 1 and 2 for LEDs. So do not fiddle with them except for
- * information purposes.
- */
-static int novatd_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct dvb_usb_device *dev = adap->dev;
-	struct dib0700_state *st = dev->priv;
-
-	if (adap->id == 0) {
-		stk7070pd_init(dev);
-
-		/* turn the power LED on, the other two off (just in case) */
-		dib0700_set_gpio(dev, GPIO0, GPIO_OUT, 0);
-		dib0700_set_gpio(dev, GPIO1, GPIO_OUT, 0);
-		dib0700_set_gpio(dev, GPIO2, GPIO_OUT, 1);
-
-		if (dib7000p_i2c_enumeration(&dev->i2c_adap, 2, 18,
-					     stk7070pd_dib7000p_config) != 0) {
-			err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
-			    __func__);
-			return -ENODEV;
-		}
-	}
-
-	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &dev->i2c_adap,
-			adap->id == 0 ? 0x80 : 0x82,
-			&stk7070pd_dib7000p_config[adap->id]);
-
-	if (adap->fe_adap[0].fe == NULL)
-		return -ENODEV;
-
-	st->read_status = adap->fe_adap[0].fe->ops.read_status;
-	adap->fe_adap[0].fe->ops.read_status = novatd_read_status_override;
-	st->sleep = adap->fe_adap[0].fe->ops.sleep;
-	adap->fe_adap[0].fe->ops.sleep = novatd_sleep_override;
-
-	return 0;
-}
-
-/* S5H1411 */
-static struct s5h1411_config pinnacle_801e_config = {
-	.output_mode   = S5H1411_PARALLEL_OUTPUT,
-	.gpio          = S5H1411_GPIO_OFF,
-	.mpeg_timing   = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
-	.qam_if        = S5H1411_IF_44000,
-	.vsb_if        = S5H1411_IF_44000,
-	.inversion     = S5H1411_INVERSION_OFF,
-	.status_mode   = S5H1411_DEMODLOCKING
-};
-
-/* Pinnacle PCTV HD Pro 801e GPIOs map:
-   GPIO0  - currently unknown
-   GPIO1  - xc5000 tuner reset
-   GPIO2  - CX25843 sleep
-   GPIO3  - currently unknown
-   GPIO4  - currently unknown
-   GPIO6  - currently unknown
-   GPIO7  - currently unknown
-   GPIO9  - currently unknown
-   GPIO10 - CX25843 reset
- */
-static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_state *st = adap->dev->priv;
-
-	/* Make use of the new i2c functions from FW 1.20 */
-	st->fw_use_new_i2c_api = 1;
-
-	/* The s5h1411 requires the dib0700 to not be in master mode */
-	st->disable_streaming_master_mode = 1;
-
-	/* All msleep values taken from Windows USB trace */
-	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
-	dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0);
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-	msleep(400);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-	msleep(60);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-	msleep(30);
-	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
-	dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0);
-	msleep(30);
-
-	/* Put the CX25843 to sleep for now since we're in digital mode */
-	dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
-
-	/* GPIOs are initialized, do the attach */
-	adap->fe_adap[0].fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config,
-			      &adap->dev->i2c_adap);
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-static int dib0700_xc5000_tuner_callback(void *priv, int component,
-					 int command, int arg)
-{
-	struct dvb_usb_adapter *adap = priv;
-
-	if (command == XC5000_TUNER_RESET) {
-		/* Reset the tuner */
-		dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0);
-		msleep(10);
-		dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1);
-		msleep(10);
-	} else {
-		err("xc5000: unknown tuner callback command: %d\n", command);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct xc5000_config s5h1411_xc5000_tunerconfig = {
-	.i2c_address      = 0x64,
-	.if_khz           = 5380,
-};
-
-static int xc5000_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	/* FIXME: generalize & move to common area */
-	adap->fe_adap[0].fe->callback = dib0700_xc5000_tuner_callback;
-
-	return dvb_attach(xc5000_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap,
-			  &s5h1411_xc5000_tunerconfig)
-		== NULL ? -ENODEV : 0;
-}
-
-static int dib0700_xc4000_tuner_callback(void *priv, int component,
-					 int command, int arg)
-{
-	struct dvb_usb_adapter *adap = priv;
-
-	if (command == XC4000_TUNER_RESET) {
-		/* Reset the tuner */
-		dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 0);
-		msleep(10);
-		dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
-	} else {
-		err("xc4000: unknown tuner callback command: %d\n", command);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct dibx000_agc_config stk7700p_7000p_xc4000_agc_config = {
-	.band_caps = BAND_UHF | BAND_VHF,
-	.setup = 0x64,
-	.inv_gain = 0x02c8,
-	.time_stabiliz = 0x15,
-	.alpha_level = 0x00,
-	.thlock = 0x76,
-	.wbd_inv = 0x01,
-	.wbd_ref = 0x0b33,
-	.wbd_sel = 0x00,
-	.wbd_alpha = 0x02,
-	.agc1_max = 0x00,
-	.agc1_min = 0x00,
-	.agc2_max = 0x9b26,
-	.agc2_min = 0x26ca,
-	.agc1_pt1 = 0x00,
-	.agc1_pt2 = 0x00,
-	.agc1_pt3 = 0x00,
-	.agc1_slope1 = 0x00,
-	.agc1_slope2 = 0x00,
-	.agc2_pt1 = 0x00,
-	.agc2_pt2 = 0x80,
-	.agc2_slope1 = 0x1d,
-	.agc2_slope2 = 0x1d,
-	.alpha_mant = 0x11,
-	.alpha_exp = 0x1b,
-	.beta_mant = 0x17,
-	.beta_exp = 0x33,
-	.perform_agc_softsplit = 0x00,
-};
-
-static struct dibx000_bandwidth_config stk7700p_xc4000_pll_config = {
-	60000, 30000,	/* internal, sampling */
-	1, 8, 3, 1, 0,	/* pll_cfg: prediv, ratio, range, reset, bypass */
-	0, 0, 1, 1, 0,	/* misc: refdiv, bypclk_div, IO_CLK_en_core, */
-			/* ADClkSrc, modulo */
-	(3 << 14) | (1 << 12) | 524,	/* sad_cfg: refsel, sel, freq_15k */
-	39370534,	/* ifreq */
-	20452225,	/* timf */
-	30000000	/* xtal */
-};
-
-/* FIXME: none of these inputs are validated yet */
-static struct dib7000p_config pctv_340e_config = {
-	.output_mpeg2_in_188_bytes = 1,
-
-	.agc_config_count = 1,
-	.agc = &stk7700p_7000p_xc4000_agc_config,
-	.bw  = &stk7700p_xc4000_pll_config,
-
-	.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
-	.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
-	.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
-};
-
-/* PCTV 340e GPIOs map:
-   dib0700:
-   GPIO2  - CX25843 sleep
-   GPIO3  - CS5340 reset
-   GPIO5  - IRD
-   GPIO6  - Power Supply
-   GPIO8  - LNA (1=off 0=on)
-   GPIO10 - CX25843 reset
-   dib7000:
-   GPIO8  - xc4000 reset
- */
-static int pctv340e_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_state *st = adap->dev->priv;
-
-	/* Power Supply on */
-	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 0);
-	msleep(50);
-	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 1);
-	msleep(100); /* Allow power supply to settle before probing */
-
-	/* cx25843 reset */
-	dib0700_set_gpio(adap->dev, GPIO10,  GPIO_OUT, 0);
-	msleep(1); /* cx25843 datasheet say 350us required */
-	dib0700_set_gpio(adap->dev, GPIO10,  GPIO_OUT, 1);
-
-	/* LNA off for now */
-	dib0700_set_gpio(adap->dev, GPIO8,  GPIO_OUT, 1);
-
-	/* Put the CX25843 to sleep for now since we're in digital mode */
-	dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
-
-	/* FIXME: not verified yet */
-	dib0700_ctrl_clock(adap->dev, 72, 1);
-
-	msleep(500);
-
-	if (dib7000pc_detection(&adap->dev->i2c_adap) == 0) {
-		/* Demodulator not found for some reason? */
-		return -ENODEV;
-	}
-
-	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x12,
-			      &pctv_340e_config);
-	st->is_dib7000pc = 1;
-
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-static struct xc4000_config dib7000p_xc4000_tunerconfig = {
-	.i2c_address	  = 0x61,
-	.default_pm	  = 1,
-	.dvb_amplitude	  = 0,
-	.set_smoothedcvbs = 0,
-	.if_khz		  = 5400
-};
-
-static int xc4000_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct i2c_adapter *tun_i2c;
-
-	/* The xc4000 is not on the main i2c bus */
-	tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe,
-					  DIBX000_I2C_INTERFACE_TUNER, 1);
-	if (tun_i2c == NULL) {
-		printk(KERN_ERR "Could not reach tuner i2c bus\n");
-		return 0;
-	}
-
-	/* Setup the reset callback */
-	adap->fe_adap[0].fe->callback = dib0700_xc4000_tuner_callback;
-
-	return dvb_attach(xc4000_attach, adap->fe_adap[0].fe, tun_i2c,
-			  &dib7000p_xc4000_tunerconfig)
-		== NULL ? -ENODEV : 0;
-}
-
-static struct lgdt3305_config hcw_lgdt3305_config = {
-	.i2c_addr           = 0x0e,
-	.mpeg_mode          = LGDT3305_MPEG_PARALLEL,
-	.tpclk_edge         = LGDT3305_TPCLK_FALLING_EDGE,
-	.tpvalid_polarity   = LGDT3305_TP_VALID_LOW,
-	.deny_i2c_rptr      = 0,
-	.spectral_inversion = 1,
-	.qam_if_khz         = 6000,
-	.vsb_if_khz         = 6000,
-	.usref_8vsb         = 0x0500,
-};
-
-static struct mxl5007t_config hcw_mxl5007t_config = {
-	.xtal_freq_hz = MxL_XTAL_25_MHZ,
-	.if_freq_hz = MxL_IF_6_MHZ,
-	.invert_if = 1,
-};
-
-/* TIGER-ATSC map:
-   GPIO0  - LNA_CTR  (H: LNA power enabled, L: LNA power disabled)
-   GPIO1  - ANT_SEL  (H: VPA, L: MCX)
-   GPIO4  - SCL2
-   GPIO6  - EN_TUNER
-   GPIO7  - SDA2
-   GPIO10 - DEM_RST
-
-   MXL is behind LG's i2c repeater.  LG is on SCL2/SDA2 gpios on the DIB
- */
-static int lgdt3305_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib0700_state *st = adap->dev->priv;
-
-	/* Make use of the new i2c functions from FW 1.20 */
-	st->fw_use_new_i2c_api = 1;
-
-	st->disable_streaming_master_mode = 1;
-
-	/* fe power enable */
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
-	msleep(30);
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
-	msleep(30);
-
-	/* demod reset */
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-	msleep(30);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
-	msleep(30);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
-	msleep(30);
-
-	adap->fe_adap[0].fe = dvb_attach(lgdt3305_attach,
-			      &hcw_lgdt3305_config,
-			      &adap->dev->i2c_adap);
-
-	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-static int mxl5007t_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	return dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe,
-			  &adap->dev->i2c_adap, 0x60,
-			  &hcw_mxl5007t_config) == NULL ? -ENODEV : 0;
-}
-
-
-/* DVB-USB and USB stuff follows */
-struct usb_device_id dib0700_usb_id_table[] = {
-/* 0 */	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK7700P) },
-	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK7700P_PC) },
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) },
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) },
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) },
-/* 5 */	{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
-	{ USB_DEVICE(USB_VID_COMPRO,    USB_PID_COMPRO_VIDEOMATE_U500) },
-	{ USB_DEVICE(USB_VID_UNIWILL,   USB_PID_UNIWILL_STK7700P) },
-	{ USB_DEVICE(USB_VID_LEADTEK,   USB_PID_WINFAST_DTV_DONGLE_STK7700P) },
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) },
-/* 10 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) },
-	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV2000E) },
-	{ USB_DEVICE(USB_VID_TERRATEC,
-			USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY) },
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK) },
-	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK7700D) },
-/* 15 */{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK7070P) },
-	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV_DVB_T_FLASH) },
-	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK7070PD) },
-	{ USB_DEVICE(USB_VID_PINNACLE,
-			USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) },
-	{ USB_DEVICE(USB_VID_COMPRO,    USB_PID_COMPRO_VIDEOMATE_U500_PC) },
-/* 20 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_EXPRESS) },
-	{ USB_DEVICE(USB_VID_GIGABYTE,  USB_PID_GIGABYTE_U7000) },
-	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) },
-	{ USB_DEVICE(USB_VID_ASUS,      USB_PID_ASUS_U3000) },
-	{ USB_DEVICE(USB_VID_ASUS,      USB_PID_ASUS_U3100) },
-/* 25 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_3) },
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_MYTV_T) },
-	{ USB_DEVICE(USB_VID_TERRATEC,  USB_PID_TERRATEC_CINERGY_HT_USB_XE) },
-	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_EXPRESSCARD_320CX) },
-	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV72E) },
-/* 30 */{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73E) },
-	{ USB_DEVICE(USB_VID_YUAN,	USB_PID_YUAN_EC372S) },
-	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
-	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_XXS) },
-	{ USB_DEVICE(USB_VID_LEADTEK,   USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
-/* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) },
-	{ USB_DEVICE(USB_VID_GIGABYTE,  USB_PID_GIGABYTE_U8000) },
-	{ USB_DEVICE(USB_VID_YUAN,      USB_PID_YUAN_STK7700PH) },
-	{ USB_DEVICE(USB_VID_ASUS,	USB_PID_ASUS_U3000H) },
-/* 40 */{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV801E) },
-	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV801E_SE) },
-	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_EXPRESS) },
-	{ USB_DEVICE(USB_VID_TERRATEC,
-			USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) },
-	{ USB_DEVICE(USB_VID_SONY,	USB_PID_SONY_PLAYTV) },
-/* 45 */{ USB_DEVICE(USB_VID_YUAN,      USB_PID_YUAN_PD378S) },
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC) },
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC_B210) },
-	{ USB_DEVICE(USB_VID_YUAN,	USB_PID_YUAN_MC770) },
-	{ USB_DEVICE(USB_VID_ELGATO,	USB_PID_ELGATO_EYETV_DTT) },
-/* 50 */{ USB_DEVICE(USB_VID_ELGATO,	USB_PID_ELGATO_EYETV_DTT_Dlx) },
-	{ USB_DEVICE(USB_VID_LEADTEK,   USB_PID_WINFAST_DTV_DONGLE_H) },
-	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_T3) },
-	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_T5) },
-	{ USB_DEVICE(USB_VID_YUAN,      USB_PID_YUAN_STK7700D) },
-/* 55 */{ USB_DEVICE(USB_VID_YUAN,	USB_PID_YUAN_STK7700D_2) },
-	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73A) },
-	{ USB_DEVICE(USB_VID_PCTV,	USB_PID_PINNACLE_PCTV73ESE) },
-	{ USB_DEVICE(USB_VID_PCTV,	USB_PID_PINNACLE_PCTV282E) },
-	{ USB_DEVICE(USB_VID_DIBCOM,	USB_PID_DIBCOM_STK7770P) },
-/* 60 */{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_XXS_2) },
-	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XPVR) },
-	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XP) },
-	{ USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x000, 0x3f00) },
-	{ USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) },
-/* 65 */{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73ESE) },
-	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV282E) },
-	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK8096GP) },
-	{ USB_DEVICE(USB_VID_ELGATO,    USB_PID_ELGATO_EYETV_DIVERSITY) },
-	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_NIM9090M) },
-/* 70 */{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_NIM8096MD) },
-	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_NIM9090MD) },
-	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_NIM7090) },
-	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_TFE7090PVR) },
-	{ USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2) },
-/* 75 */{ USB_DEVICE(USB_VID_MEDION,    USB_PID_CREATIX_CTX1921) },
-	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV340E) },
-	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV340E_SE) },
-	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_TFE7090E) },
-	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_TFE7790E) },
-/* 80 */{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_TFE8096P) },
-	{ USB_DEVICE(USB_VID_ELGATO,	USB_PID_ELGATO_EYETV_DTT_2) },
-	{ 0 }		/* Terminating entry */
-};
-MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
-
-#define DIB0700_DEFAULT_DEVICE_PROPERTIES \
-	.caps              = DVB_USB_IS_AN_I2C_ADAPTER, \
-	.usb_ctrl          = DEVICE_SPECIFIC, \
-	.firmware          = "dvb-usb-dib0700-1.20.fw", \
-	.download_firmware = dib0700_download_firmware, \
-	.no_reconnect      = 1, \
-	.size_of_priv      = sizeof(struct dib0700_state), \
-	.i2c_algo          = &dib0700_i2c_algo, \
-	.identify_state    = dib0700_identify_state
-
-#define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \
-	.streaming_ctrl   = dib0700_streaming_ctrl, \
-	.stream = { \
-		.type = USB_BULK, \
-		.count = 4, \
-		.endpoint = ep, \
-		.u = { \
-			.bulk = { \
-				.buffersize = 39480, \
-			} \
-		} \
-	}
-
-struct dvb_usb_device_properties dib0700_devices[] = {
-	{
-		DIB0700_DEFAULT_DEVICE_PROPERTIES,
-
-		.num_adapters = 1,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter       = stk7700p_pid_filter,
-				.pid_filter_ctrl  = stk7700p_pid_filter_ctrl,
-				.frontend_attach  = stk7700p_frontend_attach,
-				.tuner_attach     = stk7700p_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-			},
-		},
-
-		.num_device_descs = 8,
-		.devices = {
-			{   "DiBcom STK7700P reference design",
-				{ &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] },
-				{ NULL },
-			},
-			{   "Hauppauge Nova-T Stick",
-				{ &dib0700_usb_id_table[4], &dib0700_usb_id_table[9], NULL },
-				{ NULL },
-			},
-			{   "AVerMedia AVerTV DVB-T Volar",
-				{ &dib0700_usb_id_table[5], &dib0700_usb_id_table[10] },
-				{ NULL },
-			},
-			{   "Compro Videomate U500",
-				{ &dib0700_usb_id_table[6], &dib0700_usb_id_table[19] },
-				{ NULL },
-			},
-			{   "Uniwill STK7700P based (Hama and others)",
-				{ &dib0700_usb_id_table[7], NULL },
-				{ NULL },
-			},
-			{   "Leadtek Winfast DTV Dongle (STK7700P based)",
-				{ &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] },
-				{ NULL },
-			},
-			{   "AVerMedia AVerTV DVB-T Express",
-				{ &dib0700_usb_id_table[20] },
-				{ NULL },
-			},
-			{   "Gigabyte U7000",
-				{ &dib0700_usb_id_table[21], NULL },
-				{ NULL },
-			}
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol  = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-
-		.num_adapters = 2,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.frontend_attach  = bristol_frontend_attach,
-				.tuner_attach     = bristol_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-			}, {
-			.num_frontends = 1,
-			.fe = {{
-				.frontend_attach  = bristol_frontend_attach,
-				.tuner_attach     = bristol_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
-			}},
-			}
-		},
-
-		.num_device_descs = 1,
-		.devices = {
-			{   "Hauppauge Nova-T 500 Dual DVB-T",
-				{ &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL },
-				{ NULL },
-			},
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-
-		.num_adapters = 2,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter       = stk70x0p_pid_filter,
-				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
-				.frontend_attach  = stk7700d_frontend_attach,
-				.tuner_attach     = stk7700d_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-			}, {
-			.num_frontends = 1,
-			.fe = {{
-				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter       = stk70x0p_pid_filter,
-				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
-				.frontend_attach  = stk7700d_frontend_attach,
-				.tuner_attach     = stk7700d_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
-			}},
-			}
-		},
-
-		.num_device_descs = 5,
-		.devices = {
-			{   "Pinnacle PCTV 2000e",
-				{ &dib0700_usb_id_table[11], NULL },
-				{ NULL },
-			},
-			{   "Terratec Cinergy DT XS Diversity",
-				{ &dib0700_usb_id_table[12], NULL },
-				{ NULL },
-			},
-			{   "Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity",
-				{ &dib0700_usb_id_table[13], NULL },
-				{ NULL },
-			},
-			{   "DiBcom STK7700D reference design",
-				{ &dib0700_usb_id_table[14], NULL },
-				{ NULL },
-			},
-			{   "YUAN High-Tech DiBcom STK7700D",
-				{ &dib0700_usb_id_table[55], NULL },
-				{ NULL },
-			},
-
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-
-		.num_adapters = 1,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter       = stk70x0p_pid_filter,
-				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
-				.frontend_attach  = stk7700P2_frontend_attach,
-				.tuner_attach     = stk7700d_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-			},
-		},
-
-		.num_device_descs = 3,
-		.devices = {
-			{   "ASUS My Cinema U3000 Mini DVBT Tuner",
-				{ &dib0700_usb_id_table[23], NULL },
-				{ NULL },
-			},
-			{   "Yuan EC372S",
-				{ &dib0700_usb_id_table[31], NULL },
-				{ NULL },
-			},
-			{   "Terratec Cinergy T Express",
-				{ &dib0700_usb_id_table[42], NULL },
-				{ NULL },
-			}
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-
-		.num_adapters = 1,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter       = stk70x0p_pid_filter,
-				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
-				.frontend_attach  = stk7070p_frontend_attach,
-				.tuner_attach     = dib7070p_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-				.size_of_priv     = sizeof(struct dib0700_adapter_state),
-			},
-		},
-
-		.num_device_descs = 12,
-		.devices = {
-			{   "DiBcom STK7070P reference design",
-				{ &dib0700_usb_id_table[15], NULL },
-				{ NULL },
-			},
-			{   "Pinnacle PCTV DVB-T Flash Stick",
-				{ &dib0700_usb_id_table[16], NULL },
-				{ NULL },
-			},
-			{   "Artec T14BR DVB-T",
-				{ &dib0700_usb_id_table[22], NULL },
-				{ NULL },
-			},
-			{   "ASUS My Cinema U3100 Mini DVBT Tuner",
-				{ &dib0700_usb_id_table[24], NULL },
-				{ NULL },
-			},
-			{   "Hauppauge Nova-T Stick",
-				{ &dib0700_usb_id_table[25], NULL },
-				{ NULL },
-			},
-			{   "Hauppauge Nova-T MyTV.t",
-				{ &dib0700_usb_id_table[26], NULL },
-				{ NULL },
-			},
-			{   "Pinnacle PCTV 72e",
-				{ &dib0700_usb_id_table[29], NULL },
-				{ NULL },
-			},
-			{   "Pinnacle PCTV 73e",
-				{ &dib0700_usb_id_table[30], NULL },
-				{ NULL },
-			},
-			{   "Elgato EyeTV DTT",
-				{ &dib0700_usb_id_table[49], NULL },
-				{ NULL },
-			},
-			{   "Yuan PD378S",
-				{ &dib0700_usb_id_table[45], NULL },
-				{ NULL },
-			},
-			{   "Elgato EyeTV Dtt Dlx PD378S",
-				{ &dib0700_usb_id_table[50], NULL },
-				{ NULL },
-			},
-			{   "Elgato EyeTV DTT rev. 2",
-				{ &dib0700_usb_id_table[81], NULL },
-				{ NULL },
-			},
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol  = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-
-		.num_adapters = 1,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter       = stk70x0p_pid_filter,
-				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
-				.frontend_attach  = stk7070p_frontend_attach,
-				.tuner_attach     = dib7070p_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-				.size_of_priv     = sizeof(struct dib0700_adapter_state),
-			},
-		},
-
-		.num_device_descs = 3,
-		.devices = {
-			{   "Pinnacle PCTV 73A",
-				{ &dib0700_usb_id_table[56], NULL },
-				{ NULL },
-			},
-			{   "Pinnacle PCTV 73e SE",
-				{ &dib0700_usb_id_table[57], &dib0700_usb_id_table[65], NULL },
-				{ NULL },
-			},
-			{   "Pinnacle PCTV 282e",
-				{ &dib0700_usb_id_table[58], &dib0700_usb_id_table[66], NULL },
-				{ NULL },
-			},
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol  = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-
-		.num_adapters = 2,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter       = stk70x0p_pid_filter,
-				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
-				.frontend_attach  = novatd_frontend_attach,
-				.tuner_attach     = dib7070p_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-				.size_of_priv     = sizeof(struct dib0700_adapter_state),
-			}, {
-			.num_frontends = 1,
-			.fe = {{
-				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter       = stk70x0p_pid_filter,
-				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
-				.frontend_attach  = novatd_frontend_attach,
-				.tuner_attach     = dib7070p_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
-			}},
-				.size_of_priv     = sizeof(struct dib0700_adapter_state),
-			}
-		},
-
-		.num_device_descs = 1,
-		.devices = {
-			{   "Hauppauge Nova-TD Stick (52009)",
-				{ &dib0700_usb_id_table[35], NULL },
-				{ NULL },
-			},
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-
-		.num_adapters = 2,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter       = stk70x0p_pid_filter,
-				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
-				.frontend_attach  = stk7070pd_frontend_attach0,
-				.tuner_attach     = dib7070p_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-				.size_of_priv     = sizeof(struct dib0700_adapter_state),
-			}, {
-			.num_frontends = 1,
-			.fe = {{
-				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter       = stk70x0p_pid_filter,
-				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
-				.frontend_attach  = stk7070pd_frontend_attach1,
-				.tuner_attach     = dib7070p_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
-			}},
-				.size_of_priv     = sizeof(struct dib0700_adapter_state),
-			}
-		},
-
-		.num_device_descs = 5,
-		.devices = {
-			{   "DiBcom STK7070PD reference design",
-				{ &dib0700_usb_id_table[17], NULL },
-				{ NULL },
-			},
-			{   "Pinnacle PCTV Dual DVB-T Diversity Stick",
-				{ &dib0700_usb_id_table[18], NULL },
-				{ NULL },
-			},
-			{   "Hauppauge Nova-TD-500 (84xxx)",
-				{ &dib0700_usb_id_table[36], NULL },
-				{ NULL },
-			},
-			{  "Terratec Cinergy DT USB XS Diversity/ T5",
-				{ &dib0700_usb_id_table[43],
-					&dib0700_usb_id_table[53], NULL},
-				{ NULL },
-			},
-			{  "Sony PlayTV",
-				{ &dib0700_usb_id_table[44], NULL },
-				{ NULL },
-			},
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-
-		.num_adapters = 2,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter       = stk70x0p_pid_filter,
-				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
-				.frontend_attach  = stk7070pd_frontend_attach0,
-				.tuner_attach     = dib7070p_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-				.size_of_priv     = sizeof(struct dib0700_adapter_state),
-			}, {
-			.num_frontends = 1,
-			.fe = {{
-				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter       = stk70x0p_pid_filter,
-				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
-				.frontend_attach  = stk7070pd_frontend_attach1,
-				.tuner_attach     = dib7070p_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
-			}},
-				.size_of_priv     = sizeof(struct dib0700_adapter_state),
-			}
-		},
-
-		.num_device_descs = 1,
-		.devices = {
-			{   "Elgato EyeTV Diversity",
-				{ &dib0700_usb_id_table[68], NULL },
-				{ NULL },
-			},
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_NEC_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol  = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-
-		.num_adapters = 1,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter       = stk70x0p_pid_filter,
-				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
-				.frontend_attach  = stk7700ph_frontend_attach,
-				.tuner_attach     = stk7700ph_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-				.size_of_priv = sizeof(struct
-						dib0700_adapter_state),
-			},
-		},
-
-		.num_device_descs = 9,
-		.devices = {
-			{   "Terratec Cinergy HT USB XE",
-				{ &dib0700_usb_id_table[27], NULL },
-				{ NULL },
-			},
-			{   "Pinnacle Expresscard 320cx",
-				{ &dib0700_usb_id_table[28], NULL },
-				{ NULL },
-			},
-			{   "Terratec Cinergy HT Express",
-				{ &dib0700_usb_id_table[32], NULL },
-				{ NULL },
-			},
-			{   "Gigabyte U8000-RH",
-				{ &dib0700_usb_id_table[37], NULL },
-				{ NULL },
-			},
-			{   "YUAN High-Tech STK7700PH",
-				{ &dib0700_usb_id_table[38], NULL },
-				{ NULL },
-			},
-			{   "Asus My Cinema-U3000Hybrid",
-				{ &dib0700_usb_id_table[39], NULL },
-				{ NULL },
-			},
-			{   "YUAN High-Tech MC770",
-				{ &dib0700_usb_id_table[48], NULL },
-				{ NULL },
-			},
-			{   "Leadtek WinFast DTV Dongle H",
-				{ &dib0700_usb_id_table[51], NULL },
-				{ NULL },
-			},
-			{   "YUAN High-Tech STK7700D",
-				{ &dib0700_usb_id_table[54], NULL },
-				{ NULL },
-			},
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol  = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-		.num_adapters = 1,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.frontend_attach  = s5h1411_frontend_attach,
-				.tuner_attach     = xc5000_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-				.size_of_priv = sizeof(struct
-						dib0700_adapter_state),
-			},
-		},
-
-		.num_device_descs = 2,
-		.devices = {
-			{   "Pinnacle PCTV HD Pro USB Stick",
-				{ &dib0700_usb_id_table[40], NULL },
-				{ NULL },
-			},
-			{   "Pinnacle PCTV HD USB Stick",
-				{ &dib0700_usb_id_table[41], NULL },
-				{ NULL },
-			},
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol  = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-		.num_adapters = 1,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.frontend_attach  = lgdt3305_frontend_attach,
-				.tuner_attach     = mxl5007t_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-				.size_of_priv = sizeof(struct
-						dib0700_adapter_state),
-			},
-		},
-
-		.num_device_descs = 2,
-		.devices = {
-			{   "Hauppauge ATSC MiniCard (B200)",
-				{ &dib0700_usb_id_table[46], NULL },
-				{ NULL },
-			},
-			{   "Hauppauge ATSC MiniCard (B210)",
-				{ &dib0700_usb_id_table[47], NULL },
-				{ NULL },
-			},
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-
-		.num_adapters = 1,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter       = stk70x0p_pid_filter,
-				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
-				.frontend_attach  = stk7770p_frontend_attach,
-				.tuner_attach     = dib7770p_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-				.size_of_priv =
-					sizeof(struct dib0700_adapter_state),
-			},
-		},
-
-		.num_device_descs = 4,
-		.devices = {
-			{   "DiBcom STK7770P reference design",
-				{ &dib0700_usb_id_table[59], NULL },
-				{ NULL },
-			},
-			{   "Terratec Cinergy T USB XXS (HD)/ T3",
-				{ &dib0700_usb_id_table[33],
-					&dib0700_usb_id_table[52],
-					&dib0700_usb_id_table[60], NULL},
-				{ NULL },
-			},
-			{   "TechniSat AirStar TeleStick 2",
-				{ &dib0700_usb_id_table[74], NULL },
-				{ NULL },
-			},
-			{   "Medion CTX1921 DVB-T USB",
-				{ &dib0700_usb_id_table[75], NULL },
-				{ NULL },
-			},
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol  = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-		.num_adapters = 1,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.caps  = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter = stk80xx_pid_filter,
-				.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
-				.frontend_attach  = stk807x_frontend_attach,
-				.tuner_attach     = dib807x_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-				.size_of_priv =
-					sizeof(struct dib0700_adapter_state),
-			},
-		},
-
-		.num_device_descs = 3,
-		.devices = {
-			{   "DiBcom STK807xP reference design",
-				{ &dib0700_usb_id_table[62], NULL },
-				{ NULL },
-			},
-			{   "Prolink Pixelview SBTVD",
-				{ &dib0700_usb_id_table[63], NULL },
-				{ NULL },
-			},
-			{   "EvolutePC TVWay+",
-				{ &dib0700_usb_id_table[64], NULL },
-				{ NULL },
-			},
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_NEC_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol  = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-		.num_adapters = 2,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.caps  = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter = stk80xx_pid_filter,
-				.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
-				.frontend_attach  = stk807xpvr_frontend_attach0,
-				.tuner_attach     = dib807x_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-				.size_of_priv =
-					sizeof(struct dib0700_adapter_state),
-			},
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.caps  = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter = stk80xx_pid_filter,
-				.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
-				.frontend_attach  = stk807xpvr_frontend_attach1,
-				.tuner_attach     = dib807x_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
-			}},
-				.size_of_priv =
-					sizeof(struct dib0700_adapter_state),
-			},
-		},
-
-		.num_device_descs = 1,
-		.devices = {
-			{   "DiBcom STK807xPVR reference design",
-				{ &dib0700_usb_id_table[61], NULL },
-				{ NULL },
-			},
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol  = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-		.num_adapters = 1,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
-					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter = stk80xx_pid_filter,
-				.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
-				.frontend_attach  = stk809x_frontend_attach,
-				.tuner_attach     = dib809x_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-				.size_of_priv =
-					sizeof(struct dib0700_adapter_state),
-			},
-		},
-
-		.num_device_descs = 1,
-		.devices = {
-			{   "DiBcom STK8096GP reference design",
-				{ &dib0700_usb_id_table[67], NULL },
-				{ NULL },
-			},
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol  = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-		.num_adapters = 1,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
-					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter = dib90x0_pid_filter,
-				.pid_filter_ctrl = dib90x0_pid_filter_ctrl,
-				.frontend_attach  = stk9090m_frontend_attach,
-				.tuner_attach     = dib9090_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-				.size_of_priv =
-					sizeof(struct dib0700_adapter_state),
-			},
-		},
-
-		.num_device_descs = 1,
-		.devices = {
-			{   "DiBcom STK9090M reference design",
-				{ &dib0700_usb_id_table[69], NULL },
-				{ NULL },
-			},
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol  = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-		.num_adapters = 1,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
-					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter = stk80xx_pid_filter,
-				.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
-				.frontend_attach  = nim8096md_frontend_attach,
-				.tuner_attach     = nim8096md_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-				.size_of_priv =
-					sizeof(struct dib0700_adapter_state),
-			},
-		},
-
-		.num_device_descs = 1,
-		.devices = {
-			{   "DiBcom NIM8096MD reference design",
-				{ &dib0700_usb_id_table[70], NULL },
-				{ NULL },
-			},
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol  = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-		.num_adapters = 1,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
-					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter = dib90x0_pid_filter,
-				.pid_filter_ctrl = dib90x0_pid_filter_ctrl,
-				.frontend_attach  = nim9090md_frontend_attach,
-				.tuner_attach     = nim9090md_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-				.size_of_priv =
-					sizeof(struct dib0700_adapter_state),
-			},
-		},
-
-		.num_device_descs = 1,
-		.devices = {
-			{   "DiBcom NIM9090MD reference design",
-				{ &dib0700_usb_id_table[71], NULL },
-				{ NULL },
-			},
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol  = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-		.num_adapters = 1,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
-					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter = stk70x0p_pid_filter,
-				.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
-				.frontend_attach  = nim7090_frontend_attach,
-				.tuner_attach     = nim7090_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-				.size_of_priv =
-					sizeof(struct dib0700_adapter_state),
-			},
-		},
-
-		.num_device_descs = 1,
-		.devices = {
-			{   "DiBcom NIM7090 reference design",
-				{ &dib0700_usb_id_table[72], NULL },
-				{ NULL },
-			},
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol  = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-		.num_adapters = 2,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
-					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter = stk70x0p_pid_filter,
-				.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
-				.frontend_attach  = tfe7090pvr_frontend0_attach,
-				.tuner_attach     = tfe7090pvr_tuner0_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
-			}},
-				.size_of_priv =
-					sizeof(struct dib0700_adapter_state),
-			},
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
-					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-				.pid_filter_count = 32,
-				.pid_filter = stk70x0p_pid_filter,
-				.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
-				.frontend_attach  = tfe7090pvr_frontend1_attach,
-				.tuner_attach     = tfe7090pvr_tuner1_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-				.size_of_priv =
-					sizeof(struct dib0700_adapter_state),
-			},
-		},
-
-		.num_device_descs = 1,
-		.devices = {
-			{   "DiBcom TFE7090PVR reference design",
-				{ &dib0700_usb_id_table[73], NULL },
-				{ NULL },
-			},
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol  = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-		.num_adapters = 1,
-		.adapter = {
-			{
-			.num_frontends = 1,
-			.fe = {{
-				.frontend_attach  = pctv340e_frontend_attach,
-				.tuner_attach     = xc4000_tuner_attach,
-
-				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-			}},
-				.size_of_priv = sizeof(struct
-						dib0700_adapter_state),
-			},
-		},
-
-		.num_device_descs = 2,
-		.devices = {
-			{   "Pinnacle PCTV 340e HD Pro USB Stick",
-				{ &dib0700_usb_id_table[76], NULL },
-				{ NULL },
-			},
-			{   "Pinnacle PCTV Hybrid Stick Solo",
-				{ &dib0700_usb_id_table[77], NULL },
-				{ NULL },
-			},
-		},
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol  = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-		.num_adapters = 1,
-		.adapter = {
-			{
-				.num_frontends = 1,
-				.fe = {{
-					.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
-						DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-					.pid_filter_count = 32,
-					.pid_filter = stk70x0p_pid_filter,
-					.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
-					.frontend_attach  = tfe7090e_frontend_attach,
-					.tuner_attach     = tfe7090e_tuner_attach,
-
-					DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-				} },
-
-				.size_of_priv =
-					sizeof(struct dib0700_adapter_state),
-			},
-		},
-
-		.num_device_descs = 1,
-		.devices = {
-			{   "DiBcom TFE7090E reference design",
-				{ &dib0700_usb_id_table[78], NULL },
-				{ NULL },
-			},
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol  = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-		.num_adapters = 1,
-		.adapter = {
-			{
-				.num_frontends = 1,
-				.fe = {{
-					.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
-						DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-					.pid_filter_count = 32,
-					.pid_filter = stk70x0p_pid_filter,
-					.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
-					.frontend_attach  = tfe7790e_frontend_attach,
-					.tuner_attach     = tfe7790e_tuner_attach,
-
-					DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
-				} },
-
-				.size_of_priv =
-					sizeof(struct dib0700_adapter_state),
-			},
-		},
-
-		.num_device_descs = 1,
-		.devices = {
-			{   "DiBcom TFE7790E reference design",
-				{ &dib0700_usb_id_table[79], NULL },
-				{ NULL },
-			},
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol  = dib0700_change_protocol,
-		},
-	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
-		.num_adapters = 1,
-		.adapter = {
-			{
-				.num_frontends = 1,
-				.fe = {{
-					.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
-						DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-					.pid_filter_count = 32,
-					.pid_filter = stk80xx_pid_filter,
-					.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
-					.frontend_attach  = tfe8096p_frontend_attach,
-					.tuner_attach     = tfe8096p_tuner_attach,
-
-					DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-
-				} },
-
-				.size_of_priv =
-					sizeof(struct dib0700_adapter_state),
-			},
-		},
-
-		.num_device_descs = 1,
-		.devices = {
-			{   "DiBcom TFE8096P reference design",
-				{ &dib0700_usb_id_table[80], NULL },
-				{ NULL },
-			},
-		},
-
-		.rc.core = {
-			.rc_interval      = DEFAULT_RC_INTERVAL,
-			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
-			.module_name	  = "dib0700",
-			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
-			.change_protocol  = dib0700_change_protocol,
-		},
-	},
-};
-
-int dib0700_device_count = ARRAY_SIZE(dib0700_devices);
diff --git a/drivers/media/dvb/dvb-usb/dib07x0.h b/drivers/media/dvb/dvb-usb/dib07x0.h
deleted file mode 100644
index 7e62c10..0000000
--- a/drivers/media/dvb/dvb-usb/dib07x0.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef _DIB07X0_H_
-#define _DIB07X0_H_
-
-enum dib07x0_gpios {
-	GPIO0  =  0,
-	GPIO1  =  2,
-	GPIO2  =  3,
-	GPIO3  =  4,
-	GPIO4  =  5,
-	GPIO5  =  6,
-	GPIO6  =  8,
-	GPIO7  = 10,
-	GPIO8  = 11,
-	GPIO9  = 14,
-	GPIO10 = 15,
-};
-
-#define GPIO_IN  0
-#define GPIO_OUT 1
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/dvb/dvb-usb/dibusb-common.c
deleted file mode 100644
index a76bbb2..0000000
--- a/drivers/media/dvb/dvb-usb/dibusb-common.c
+++ /dev/null
@@ -1,479 +0,0 @@
-/* Common methods for dibusb-based-receivers.
- *
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "dibusb.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info (|-able))." DVB_USB_DEBUG_STATUS);
-MODULE_LICENSE("GPL");
-
-#define deb_info(args...) dprintk(debug,0x01,args)
-
-/* common stuff used by the different dibusb modules */
-int dibusb_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	if (adap->priv != NULL) {
-		struct dibusb_state *st = adap->priv;
-		if (st->ops.fifo_ctrl != NULL)
-			if (st->ops.fifo_ctrl(adap->fe_adap[0].fe, onoff)) {
-				err("error while controlling the fifo of the demod.");
-				return -ENODEV;
-			}
-	}
-	return 0;
-}
-EXPORT_SYMBOL(dibusb_streaming_ctrl);
-
-int dibusb_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff)
-{
-	if (adap->priv != NULL) {
-		struct dibusb_state *st = adap->priv;
-		if (st->ops.pid_ctrl != NULL)
-			st->ops.pid_ctrl(adap->fe_adap[0].fe,
-					 index, pid, onoff);
-	}
-	return 0;
-}
-EXPORT_SYMBOL(dibusb_pid_filter);
-
-int dibusb_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	if (adap->priv != NULL) {
-		struct dibusb_state *st = adap->priv;
-		if (st->ops.pid_parse != NULL)
-			if (st->ops.pid_parse(adap->fe_adap[0].fe, onoff) < 0)
-				err("could not handle pid_parser");
-	}
-	return 0;
-}
-EXPORT_SYMBOL(dibusb_pid_filter_ctrl);
-
-int dibusb_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	u8 b[3];
-	int ret;
-	b[0] = DIBUSB_REQ_SET_IOCTL;
-	b[1] = DIBUSB_IOCTL_CMD_POWER_MODE;
-	b[2] = onoff ? DIBUSB_IOCTL_POWER_WAKEUP : DIBUSB_IOCTL_POWER_SLEEP;
-	ret = dvb_usb_generic_write(d,b,3);
-	msleep(10);
-	return ret;
-}
-EXPORT_SYMBOL(dibusb_power_ctrl);
-
-int dibusb2_0_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	u8 b[3] = { 0 };
-	int ret;
-
-	if ((ret = dibusb_streaming_ctrl(adap,onoff)) < 0)
-		return ret;
-
-	if (onoff) {
-		b[0] = DIBUSB_REQ_SET_STREAMING_MODE;
-		b[1] = 0x00;
-		if ((ret = dvb_usb_generic_write(adap->dev,b,2)) < 0)
-			return ret;
-	}
-
-	b[0] = DIBUSB_REQ_SET_IOCTL;
-	b[1] = onoff ? DIBUSB_IOCTL_CMD_ENABLE_STREAM : DIBUSB_IOCTL_CMD_DISABLE_STREAM;
-	return dvb_usb_generic_write(adap->dev,b,3);
-}
-EXPORT_SYMBOL(dibusb2_0_streaming_ctrl);
-
-int dibusb2_0_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	if (onoff) {
-		u8 b[3] = { DIBUSB_REQ_SET_IOCTL, DIBUSB_IOCTL_CMD_POWER_MODE, DIBUSB_IOCTL_POWER_WAKEUP };
-		return dvb_usb_generic_write(d,b,3);
-	} else
-		return 0;
-}
-EXPORT_SYMBOL(dibusb2_0_power_ctrl);
-
-static int dibusb_i2c_msg(struct dvb_usb_device *d, u8 addr,
-			  u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
-{
-	u8 sndbuf[wlen+4]; /* lead(1) devaddr,direction(1) addr(2) data(wlen) (len(2) (when reading)) */
-	/* write only ? */
-	int wo = (rbuf == NULL || rlen == 0),
-		len = 2 + wlen + (wo ? 0 : 2);
-
-	sndbuf[0] = wo ? DIBUSB_REQ_I2C_WRITE : DIBUSB_REQ_I2C_READ;
-	sndbuf[1] = (addr << 1) | (wo ? 0 : 1);
-
-	memcpy(&sndbuf[2],wbuf,wlen);
-
-	if (!wo) {
-		sndbuf[wlen+2] = (rlen >> 8) & 0xff;
-		sndbuf[wlen+3] = rlen & 0xff;
-	}
-
-	return dvb_usb_generic_rw(d,sndbuf,len,rbuf,rlen,0);
-}
-
-/*
- * I2C master xfer function
- */
-static int dibusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	int i;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	for (i = 0; i < num; i++) {
-		/* write/read request */
-		if (i+1 < num && (msg[i].flags & I2C_M_RD) == 0
-					  && (msg[i+1].flags & I2C_M_RD)) {
-			if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len,
-						msg[i+1].buf,msg[i+1].len) < 0)
-				break;
-			i++;
-		} else if ((msg[i].flags & I2C_M_RD) == 0) {
-			if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len,NULL,0) < 0)
-				break;
-		} else if (msg[i].addr != 0x50) {
-			/* 0x50 is the address of the eeprom - we need to protect it
-			 * from dibusb's bad i2c implementation: reads without
-			 * writing the offset before are forbidden */
-			if (dibusb_i2c_msg(d, msg[i].addr, NULL, 0, msg[i].buf, msg[i].len) < 0)
-				break;
-		}
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-	return i;
-}
-
-static u32 dibusb_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-struct i2c_algorithm dibusb_i2c_algo = {
-	.master_xfer   = dibusb_i2c_xfer,
-	.functionality = dibusb_i2c_func,
-};
-EXPORT_SYMBOL(dibusb_i2c_algo);
-
-int dibusb_read_eeprom_byte(struct dvb_usb_device *d, u8 offs, u8 *val)
-{
-	u8 wbuf[1] = { offs };
-	return dibusb_i2c_msg(d, 0x50, wbuf, 1, val, 1);
-}
-EXPORT_SYMBOL(dibusb_read_eeprom_byte);
-
-/* 3000MC/P stuff */
-// Config Adjacent channels  Perf -cal22
-static struct dibx000_agc_config dib3000p_mt2060_agc_config = {
-	.band_caps = BAND_VHF | BAND_UHF,
-	.setup     = (1 << 8) | (5 << 5) | (1 << 4) | (1 << 3) | (0 << 2) | (2 << 0),
-
-	.agc1_max = 48497,
-	.agc1_min = 23593,
-	.agc2_max = 46531,
-	.agc2_min = 24904,
-
-	.agc1_pt1 = 0x65,
-	.agc1_pt2 = 0x69,
-
-	.agc1_slope1 = 0x51,
-	.agc1_slope2 = 0x27,
-
-	.agc2_pt1 = 0,
-	.agc2_pt2 = 0x33,
-
-	.agc2_slope1 = 0x35,
-	.agc2_slope2 = 0x37,
-};
-
-static struct dib3000mc_config stk3000p_dib3000p_config = {
-	&dib3000p_mt2060_agc_config,
-
-	.max_time     = 0x196,
-	.ln_adc_level = 0x1cc7,
-
-	.output_mpeg2_in_188_bytes = 1,
-
-	.agc_command1 = 1,
-	.agc_command2 = 1,
-};
-
-static struct dibx000_agc_config dib3000p_panasonic_agc_config = {
-	.band_caps = BAND_VHF | BAND_UHF,
-	.setup     = (1 << 8) | (5 << 5) | (1 << 4) | (1 << 3) | (0 << 2) | (2 << 0),
-
-	.agc1_max = 56361,
-	.agc1_min = 22282,
-	.agc2_max = 47841,
-	.agc2_min = 36045,
-
-	.agc1_pt1 = 0x3b,
-	.agc1_pt2 = 0x6b,
-
-	.agc1_slope1 = 0x55,
-	.agc1_slope2 = 0x1d,
-
-	.agc2_pt1 = 0,
-	.agc2_pt2 = 0x0a,
-
-	.agc2_slope1 = 0x95,
-	.agc2_slope2 = 0x1e,
-};
-
-#if defined(CONFIG_DVB_DIB3000MC) || 					\
-	(defined(CONFIG_DVB_DIB3000MC_MODULE) && defined(MODULE))
-
-static struct dib3000mc_config mod3000p_dib3000p_config = {
-	&dib3000p_panasonic_agc_config,
-
-	.max_time     = 0x51,
-	.ln_adc_level = 0x1cc7,
-
-	.output_mpeg2_in_188_bytes = 1,
-
-	.agc_command1 = 1,
-	.agc_command2 = 1,
-};
-
-int dibusb_dib3000mc_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	if (adap->dev->udev->descriptor.idVendor  == USB_VID_LITEON &&
-			adap->dev->udev->descriptor.idProduct ==
-			USB_PID_LITEON_DVB_T_WARM) {
-		msleep(1000);
-	}
-
-	adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach,
-					 &adap->dev->i2c_adap,
-					 DEFAULT_DIB3000P_I2C_ADDRESS,
-					 &mod3000p_dib3000p_config);
-	if ((adap->fe_adap[0].fe) == NULL)
-		adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach,
-						 &adap->dev->i2c_adap,
-						 DEFAULT_DIB3000MC_I2C_ADDRESS,
-						 &mod3000p_dib3000p_config);
-	if ((adap->fe_adap[0].fe) != NULL) {
-		if (adap->priv != NULL) {
-			struct dibusb_state *st = adap->priv;
-			st->ops.pid_parse = dib3000mc_pid_parse;
-			st->ops.pid_ctrl  = dib3000mc_pid_control;
-		}
-		return 0;
-	}
-	return -ENODEV;
-}
-EXPORT_SYMBOL(dibusb_dib3000mc_frontend_attach);
-
-static struct mt2060_config stk3000p_mt2060_config = {
-	0x60
-};
-
-int dibusb_dib3000mc_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct dibusb_state *st = adap->priv;
-	u8 a,b;
-	u16 if1 = 1220;
-	struct i2c_adapter *tun_i2c;
-
-	// First IF calibration for Liteon Sticks
-	if (adap->dev->udev->descriptor.idVendor  == USB_VID_LITEON &&
-		adap->dev->udev->descriptor.idProduct == USB_PID_LITEON_DVB_T_WARM) {
-
-		dibusb_read_eeprom_byte(adap->dev,0x7E,&a);
-		dibusb_read_eeprom_byte(adap->dev,0x7F,&b);
-
-		if (a == 0x00)
-			if1 += b;
-		else if (a == 0x80)
-			if1 -= b;
-		else
-			warn("LITE-ON DVB-T: Strange IF1 calibration :%2X %2X\n", a, b);
-
-	} else if (adap->dev->udev->descriptor.idVendor  == USB_VID_DIBCOM &&
-		   adap->dev->udev->descriptor.idProduct == USB_PID_DIBCOM_MOD3001_WARM) {
-		u8 desc;
-		dibusb_read_eeprom_byte(adap->dev, 7, &desc);
-		if (desc == 2) {
-			a = 127;
-			do {
-				dibusb_read_eeprom_byte(adap->dev, a, &desc);
-				a--;
-			} while (a > 7 && (desc == 0xff || desc == 0x00));
-			if (desc & 0x80)
-				if1 -= (0xff - desc);
-			else
-				if1 += desc;
-		}
-	}
-
-	tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1);
-	if (dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk3000p_mt2060_config, if1) == NULL) {
-		/* not found - use panasonic pll parameters */
-		if (dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, tun_i2c, DVB_PLL_ENV57H1XD5) == NULL)
-			return -ENOMEM;
-	} else {
-		st->mt2060_present = 1;
-		/* set the correct parameters for the dib3000p */
-		dib3000mc_set_config(adap->fe_adap[0].fe, &stk3000p_dib3000p_config);
-	}
-	return 0;
-}
-EXPORT_SYMBOL(dibusb_dib3000mc_tuner_attach);
-#endif
-
-/*
- * common remote control stuff
- */
-struct rc_map_table rc_map_dibusb_table[] = {
-	/* Key codes for the little Artec T1/Twinhan/HAMA/ remote. */
-	{ 0x0016, KEY_POWER },
-	{ 0x0010, KEY_MUTE },
-	{ 0x0003, KEY_1 },
-	{ 0x0001, KEY_2 },
-	{ 0x0006, KEY_3 },
-	{ 0x0009, KEY_4 },
-	{ 0x001d, KEY_5 },
-	{ 0x001f, KEY_6 },
-	{ 0x000d, KEY_7 },
-	{ 0x0019, KEY_8 },
-	{ 0x001b, KEY_9 },
-	{ 0x0015, KEY_0 },
-	{ 0x0005, KEY_CHANNELUP },
-	{ 0x0002, KEY_CHANNELDOWN },
-	{ 0x001e, KEY_VOLUMEUP },
-	{ 0x000a, KEY_VOLUMEDOWN },
-	{ 0x0011, KEY_RECORD },
-	{ 0x0017, KEY_FAVORITES }, /* Heart symbol - Channel list. */
-	{ 0x0014, KEY_PLAY },
-	{ 0x001a, KEY_STOP },
-	{ 0x0040, KEY_REWIND },
-	{ 0x0012, KEY_FASTFORWARD },
-	{ 0x000e, KEY_PREVIOUS }, /* Recall - Previous channel. */
-	{ 0x004c, KEY_PAUSE },
-	{ 0x004d, KEY_SCREEN }, /* Full screen mode. */
-	{ 0x0054, KEY_AUDIO }, /* MTS - Switch to secondary audio. */
-	/* additional keys TwinHan VisionPlus, the Artec seemingly not have */
-	{ 0x000c, KEY_CANCEL }, /* Cancel */
-	{ 0x001c, KEY_EPG }, /* EPG */
-	{ 0x0000, KEY_TAB }, /* Tab */
-	{ 0x0048, KEY_INFO }, /* Preview */
-	{ 0x0004, KEY_LIST }, /* RecordList */
-	{ 0x000f, KEY_TEXT }, /* Teletext */
-	/* Key codes for the KWorld/ADSTech/JetWay remote. */
-	{ 0x8612, KEY_POWER },
-	{ 0x860f, KEY_SELECT }, /* source */
-	{ 0x860c, KEY_UNKNOWN }, /* scan */
-	{ 0x860b, KEY_EPG },
-	{ 0x8610, KEY_MUTE },
-	{ 0x8601, KEY_1 },
-	{ 0x8602, KEY_2 },
-	{ 0x8603, KEY_3 },
-	{ 0x8604, KEY_4 },
-	{ 0x8605, KEY_5 },
-	{ 0x8606, KEY_6 },
-	{ 0x8607, KEY_7 },
-	{ 0x8608, KEY_8 },
-	{ 0x8609, KEY_9 },
-	{ 0x860a, KEY_0 },
-	{ 0x8618, KEY_ZOOM },
-	{ 0x861c, KEY_UNKNOWN }, /* preview */
-	{ 0x8613, KEY_UNKNOWN }, /* snap */
-	{ 0x8600, KEY_UNDO },
-	{ 0x861d, KEY_RECORD },
-	{ 0x860d, KEY_STOP },
-	{ 0x860e, KEY_PAUSE },
-	{ 0x8616, KEY_PLAY },
-	{ 0x8611, KEY_BACK },
-	{ 0x8619, KEY_FORWARD },
-	{ 0x8614, KEY_UNKNOWN }, /* pip */
-	{ 0x8615, KEY_ESC },
-	{ 0x861a, KEY_UP },
-	{ 0x861e, KEY_DOWN },
-	{ 0x861f, KEY_LEFT },
-	{ 0x861b, KEY_RIGHT },
-
-	/* Key codes for the DiBcom MOD3000 remote. */
-	{ 0x8000, KEY_MUTE },
-	{ 0x8001, KEY_TEXT },
-	{ 0x8002, KEY_HOME },
-	{ 0x8003, KEY_POWER },
-
-	{ 0x8004, KEY_RED },
-	{ 0x8005, KEY_GREEN },
-	{ 0x8006, KEY_YELLOW },
-	{ 0x8007, KEY_BLUE },
-
-	{ 0x8008, KEY_DVD },
-	{ 0x8009, KEY_AUDIO },
-	{ 0x800a, KEY_IMAGES },      /* Pictures */
-	{ 0x800b, KEY_VIDEO },
-
-	{ 0x800c, KEY_BACK },
-	{ 0x800d, KEY_UP },
-	{ 0x800e, KEY_RADIO },
-	{ 0x800f, KEY_EPG },
-
-	{ 0x8010, KEY_LEFT },
-	{ 0x8011, KEY_OK },
-	{ 0x8012, KEY_RIGHT },
-	{ 0x8013, KEY_UNKNOWN },    /* SAP */
-
-	{ 0x8014, KEY_TV },
-	{ 0x8015, KEY_DOWN },
-	{ 0x8016, KEY_MENU },       /* DVD Menu */
-	{ 0x8017, KEY_LAST },
-
-	{ 0x8018, KEY_RECORD },
-	{ 0x8019, KEY_STOP },
-	{ 0x801a, KEY_PAUSE },
-	{ 0x801b, KEY_PLAY },
-
-	{ 0x801c, KEY_PREVIOUS },
-	{ 0x801d, KEY_REWIND },
-	{ 0x801e, KEY_FASTFORWARD },
-	{ 0x801f, KEY_NEXT},
-
-	{ 0x8040, KEY_1 },
-	{ 0x8041, KEY_2 },
-	{ 0x8042, KEY_3 },
-	{ 0x8043, KEY_CHANNELUP },
-
-	{ 0x8044, KEY_4 },
-	{ 0x8045, KEY_5 },
-	{ 0x8046, KEY_6 },
-	{ 0x8047, KEY_CHANNELDOWN },
-
-	{ 0x8048, KEY_7 },
-	{ 0x8049, KEY_8 },
-	{ 0x804a, KEY_9 },
-	{ 0x804b, KEY_VOLUMEUP },
-
-	{ 0x804c, KEY_CLEAR },
-	{ 0x804d, KEY_0 },
-	{ 0x804e, KEY_ENTER },
-	{ 0x804f, KEY_VOLUMEDOWN },
-};
-EXPORT_SYMBOL(rc_map_dibusb_table);
-
-int dibusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
-{
-	u8 key[5],cmd = DIBUSB_REQ_POLL_REMOTE;
-	dvb_usb_generic_rw(d,&cmd,1,key,5,0);
-	dvb_usb_nec_rc_key_to_event(d,key,event,state);
-	if (key[0] != 0)
-		deb_info("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]);
-	return 0;
-}
-EXPORT_SYMBOL(dibusb_rc_query);
diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/dvb/dvb-usb/dibusb-mb.c
deleted file mode 100644
index a4ac37e..0000000
--- a/drivers/media/dvb/dvb-usb/dibusb-mb.c
+++ /dev/null
@@ -1,471 +0,0 @@
-/* DVB USB compliant linux driver for mobile DVB-T USB devices based on
- * reference designs made by DiBcom (http://www.dibcom.fr/) (DiB3000M-B)
- *
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
- *
- * based on GPL code from DiBcom, which has
- * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr)
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "dibusb.h"
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static int dib3000mb_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
-{
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct dibusb_state *st = adap->priv;
-
-	return st->ops.tuner_pass_ctrl(fe, enable, st->tuner_addr);
-}
-
-static int dibusb_dib3000mb_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct dib3000_config demod_cfg;
-	struct dibusb_state *st = adap->priv;
-
-	demod_cfg.demod_address = 0x8;
-
-	adap->fe_adap[0].fe = dvb_attach(dib3000mb_attach, &demod_cfg,
-					 &adap->dev->i2c_adap, &st->ops);
-	if ((adap->fe_adap[0].fe) == NULL)
-		return -ENODEV;
-
-	adap->fe_adap[0].fe->ops.i2c_gate_ctrl = dib3000mb_i2c_gate_ctrl;
-
-	return 0;
-}
-
-static int dibusb_thomson_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct dibusb_state *st = adap->priv;
-
-	st->tuner_addr = 0x61;
-
-	dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61, &adap->dev->i2c_adap,
-		   DVB_PLL_TUA6010XS);
-	return 0;
-}
-
-static int dibusb_panasonic_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct dibusb_state *st = adap->priv;
-
-	st->tuner_addr = 0x60;
-
-	dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, &adap->dev->i2c_adap,
-		   DVB_PLL_TDA665X);
-	return 0;
-}
-
-/* Some of the Artec 1.1 device aren't equipped with the default tuner
- * (Thomson Cable), but with a Panasonic ENV77H11D5.  This function figures
- * this out. */
-static int dibusb_tuner_probe_and_attach(struct dvb_usb_adapter *adap)
-{
-	u8 b[2] = { 0,0 }, b2[1];
-	int ret = 0;
-	struct i2c_msg msg[2] = {
-		{ .flags = 0,        .buf = b,  .len = 2 },
-		{ .flags = I2C_M_RD, .buf = b2, .len = 1 },
-	};
-	struct dibusb_state *st = adap->priv;
-
-	/* the Panasonic sits on I2C addrass 0x60, the Thomson on 0x61 */
-	msg[0].addr = msg[1].addr = st->tuner_addr = 0x60;
-
-	if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl)
-		adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 1);
-
-	if (i2c_transfer(&adap->dev->i2c_adap, msg, 2) != 2) {
-		err("tuner i2c write failed.");
-		ret = -EREMOTEIO;
-	}
-
-	if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl)
-		adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 0);
-
-	if (b2[0] == 0xfe) {
-		info("This device has the Thomson Cable onboard. Which is default.");
-		ret = dibusb_thomson_tuner_attach(adap);
-	} else {
-		info("This device has the Panasonic ENV77H11D5 onboard.");
-		ret = dibusb_panasonic_tuner_attach(adap);
-	}
-
-	return ret;
-}
-
-/* USB Driver stuff */
-static struct dvb_usb_device_properties dibusb1_1_properties;
-static struct dvb_usb_device_properties dibusb1_1_an2235_properties;
-static struct dvb_usb_device_properties dibusb2_0b_properties;
-static struct dvb_usb_device_properties artec_t1_usb2_properties;
-
-static int dibusb_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	if (0 == dvb_usb_device_init(intf, &dibusb1_1_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &dibusb1_1_an2235_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &dibusb2_0b_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &artec_t1_usb2_properties,
-				     THIS_MODULE, NULL, adapter_nr))
-		return 0;
-
-	return -EINVAL;
-}
-
-/* do not change the order of the ID table */
-static struct usb_device_id dibusb_dib3000mb_table [] = {
-/* 00 */	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_COLD) },
-/* 01 */	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_WARM) },
-/* 02 */	{ USB_DEVICE(USB_VID_COMPRO,		USB_PID_COMPRO_DVBU2000_COLD) },
-/* 03 */	{ USB_DEVICE(USB_VID_COMPRO,		USB_PID_COMPRO_DVBU2000_WARM) },
-/* 04 */	{ USB_DEVICE(USB_VID_COMPRO_UNK,	USB_PID_COMPRO_DVBU2000_UNK_COLD) },
-/* 05 */	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3000_COLD) },
-/* 06 */	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3000_WARM) },
-/* 07 */	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_KWORLD_VSTREAM_COLD) },
-/* 08 */	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_KWORLD_VSTREAM_WARM) },
-/* 09 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_GRANDTEC_DVBT_USB_COLD) },
-/* 10 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_GRANDTEC_DVBT_USB_WARM) },
-/* 11 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_DIBCOM_MOD3000_COLD) },
-/* 12 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_DIBCOM_MOD3000_WARM) },
-/* 13 */	{ USB_DEVICE(USB_VID_HYPER_PALTEK,	USB_PID_UNK_HYPER_PALTEK_COLD) },
-/* 14 */	{ USB_DEVICE(USB_VID_HYPER_PALTEK,	USB_PID_UNK_HYPER_PALTEK_WARM) },
-/* 15 */	{ USB_DEVICE(USB_VID_VISIONPLUS,	USB_PID_TWINHAN_VP7041_COLD) },
-/* 16 */	{ USB_DEVICE(USB_VID_VISIONPLUS,	USB_PID_TWINHAN_VP7041_WARM) },
-/* 17 */	{ USB_DEVICE(USB_VID_TWINHAN,		USB_PID_TWINHAN_VP7041_COLD) },
-/* 18 */	{ USB_DEVICE(USB_VID_TWINHAN,		USB_PID_TWINHAN_VP7041_WARM) },
-/* 19 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_COLD) },
-/* 20 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_WARM) },
-/* 21 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_AN2235_COLD) },
-/* 22 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_AN2235_WARM) },
-/* 23 */	{ USB_DEVICE(USB_VID_ADSTECH,		USB_PID_ADSTECH_USB2_COLD) },
-
-/* device ID with default DIBUSB2_0-firmware and with the hacked firmware */
-/* 24 */	{ USB_DEVICE(USB_VID_ADSTECH,		USB_PID_ADSTECH_USB2_WARM) },
-/* 25 */	{ USB_DEVICE(USB_VID_KYE,		USB_PID_KYE_DVB_T_COLD) },
-/* 26 */	{ USB_DEVICE(USB_VID_KYE,		USB_PID_KYE_DVB_T_WARM) },
-
-/* 27 */	{ USB_DEVICE(USB_VID_KWORLD,		USB_PID_KWORLD_VSTREAM_COLD) },
-
-/* 28 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_USB2_COLD) },
-/* 29 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_USB2_WARM) },
-
-/*
- * XXX: As Artec just 'forgot' to program the EEPROM on some Artec T1 devices
- *      we don't catch these faulty IDs (namely 'Cypress FX1 USB controller') that
- *      have been left on the device. If you don't have such a device but an Artec
- *      device that's supposed to work with this driver but is not detected by it,
- *      free to enable CONFIG_DVB_USB_DIBUSB_MB_FAULTY via your kernel config.
- */
-
-#ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY
-/* 30 */	{ USB_DEVICE(USB_VID_ANCHOR,		USB_PID_ULTIMA_TVBOX_ANCHOR_COLD) },
-#endif
-
-			{ }		/* Terminating entry */
-};
-MODULE_DEVICE_TABLE (usb, dibusb_dib3000mb_table);
-
-static struct dvb_usb_device_properties dibusb1_1_properties = {
-	.caps =  DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = CYPRESS_AN2135,
-
-	.firmware = "dvb-usb-dibusb-5.0.0.11.fw",
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-			.pid_filter_count = 16,
-
-			.streaming_ctrl   = dibusb_streaming_ctrl,
-			.pid_filter       = dibusb_pid_filter,
-			.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
-			.frontend_attach  = dibusb_dib3000mb_frontend_attach,
-			.tuner_attach     = dibusb_tuner_probe_and_attach,
-
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 7,
-				.endpoint = 0x02,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			},
-		}},
-			.size_of_priv     = sizeof(struct dibusb_state),
-		}
-	},
-
-	.power_ctrl       = dibusb_power_ctrl,
-
-	.rc.legacy = {
-		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_map_table     = rc_map_dibusb_table,
-		.rc_map_size      = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
-		.rc_query         = dibusb_rc_query,
-	},
-
-	.i2c_algo         = &dibusb_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 9,
-	.devices = {
-		{	"AVerMedia AverTV DVBT USB1.1",
-			{ &dibusb_dib3000mb_table[0],  NULL },
-			{ &dibusb_dib3000mb_table[1],  NULL },
-		},
-		{	"Compro Videomate DVB-U2000 - DVB-T USB1.1 (please confirm to linux-dvb)",
-			{ &dibusb_dib3000mb_table[2], &dibusb_dib3000mb_table[4], NULL},
-			{ &dibusb_dib3000mb_table[3], NULL },
-		},
-		{	"DiBcom USB1.1 DVB-T reference design (MOD3000)",
-			{ &dibusb_dib3000mb_table[5],  NULL },
-			{ &dibusb_dib3000mb_table[6],  NULL },
-		},
-		{	"KWorld V-Stream XPERT DTV - DVB-T USB1.1",
-			{ &dibusb_dib3000mb_table[7], NULL },
-			{ &dibusb_dib3000mb_table[8], NULL },
-		},
-		{	"Grandtec USB1.1 DVB-T",
-			{ &dibusb_dib3000mb_table[9],  &dibusb_dib3000mb_table[11], NULL },
-			{ &dibusb_dib3000mb_table[10], &dibusb_dib3000mb_table[12], NULL },
-		},
-		{	"Unknown USB1.1 DVB-T device ???? please report the name to the author",
-			{ &dibusb_dib3000mb_table[13], NULL },
-			{ &dibusb_dib3000mb_table[14], NULL },
-		},
-		{	"TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device",
-			{ &dibusb_dib3000mb_table[15], &dibusb_dib3000mb_table[17], NULL},
-			{ &dibusb_dib3000mb_table[16], &dibusb_dib3000mb_table[18], NULL},
-		},
-		{	"Artec T1 USB1.1 TVBOX with AN2135",
-			{ &dibusb_dib3000mb_table[19], NULL },
-			{ &dibusb_dib3000mb_table[20], NULL },
-		},
-		{	"VideoWalker DVB-T USB",
-			{ &dibusb_dib3000mb_table[25], NULL },
-			{ &dibusb_dib3000mb_table[26], NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties dibusb1_1_an2235_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-	.usb_ctrl = CYPRESS_AN2235,
-
-	.firmware = "dvb-usb-dibusb-an2235-01.fw",
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.caps = DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_ADAP_HAS_PID_FILTER,
-			.pid_filter_count = 16,
-
-			.streaming_ctrl   = dibusb_streaming_ctrl,
-			.pid_filter       = dibusb_pid_filter,
-			.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
-			.frontend_attach  = dibusb_dib3000mb_frontend_attach,
-			.tuner_attach     = dibusb_tuner_probe_and_attach,
-
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 7,
-				.endpoint = 0x02,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			},
-		}},
-			.size_of_priv     = sizeof(struct dibusb_state),
-		},
-	},
-	.power_ctrl       = dibusb_power_ctrl,
-
-	.rc.legacy = {
-		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_map_table     = rc_map_dibusb_table,
-		.rc_map_size      = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
-		.rc_query         = dibusb_rc_query,
-	},
-
-	.i2c_algo         = &dibusb_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-#ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY
-	.num_device_descs = 2,
-#else
-	.num_device_descs = 1,
-#endif
-	.devices = {
-		{	"Artec T1 USB1.1 TVBOX with AN2235",
-			{ &dibusb_dib3000mb_table[21], NULL },
-			{ &dibusb_dib3000mb_table[22], NULL },
-		},
-#ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY
-		{	"Artec T1 USB1.1 TVBOX with AN2235 (faulty USB IDs)",
-			{ &dibusb_dib3000mb_table[30], NULL },
-			{ NULL },
-		},
-		{ NULL },
-#endif
-	}
-};
-
-static struct dvb_usb_device_properties dibusb2_0b_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = CYPRESS_FX2,
-
-	.firmware = "dvb-usb-adstech-usb2-02.fw",
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-			.pid_filter_count = 16,
-
-			.streaming_ctrl   = dibusb2_0_streaming_ctrl,
-			.pid_filter       = dibusb_pid_filter,
-			.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
-			.frontend_attach  = dibusb_dib3000mb_frontend_attach,
-			.tuner_attach     = dibusb_thomson_tuner_attach,
-
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 7,
-				.endpoint = 0x06,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			},
-		}},
-			.size_of_priv     = sizeof(struct dibusb_state),
-		}
-	},
-	.power_ctrl       = dibusb2_0_power_ctrl,
-
-	.rc.legacy = {
-		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_map_table     = rc_map_dibusb_table,
-		.rc_map_size      = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
-		.rc_query         = dibusb_rc_query,
-	},
-
-	.i2c_algo         = &dibusb_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 2,
-	.devices = {
-		{	"KWorld/ADSTech Instant DVB-T USB2.0",
-			{ &dibusb_dib3000mb_table[23], NULL },
-			{ &dibusb_dib3000mb_table[24], NULL },
-		},
-		{	"KWorld Xpert DVB-T USB2.0",
-			{ &dibusb_dib3000mb_table[27], NULL },
-			{ NULL }
-		},
-		{ NULL },
-	}
-};
-
-static struct dvb_usb_device_properties artec_t1_usb2_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = CYPRESS_FX2,
-
-	.firmware = "dvb-usb-dibusb-6.0.0.8.fw",
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-			.pid_filter_count = 16,
-
-			.streaming_ctrl   = dibusb2_0_streaming_ctrl,
-			.pid_filter       = dibusb_pid_filter,
-			.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
-			.frontend_attach  = dibusb_dib3000mb_frontend_attach,
-			.tuner_attach     = dibusb_tuner_probe_and_attach,
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 7,
-				.endpoint = 0x06,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			},
-		}},
-			.size_of_priv     = sizeof(struct dibusb_state),
-		}
-	},
-	.power_ctrl       = dibusb2_0_power_ctrl,
-
-	.rc.legacy = {
-		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_map_table     = rc_map_dibusb_table,
-		.rc_map_size      = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
-		.rc_query         = dibusb_rc_query,
-	},
-
-	.i2c_algo         = &dibusb_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 1,
-	.devices = {
-		{	"Artec T1 USB2.0",
-			{ &dibusb_dib3000mb_table[28], NULL },
-			{ &dibusb_dib3000mb_table[29], NULL },
-		},
-		{ NULL },
-	}
-};
-
-static struct usb_driver dibusb_driver = {
-	.name		= "dvb_usb_dibusb_mb",
-	.probe		= dibusb_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table	= dibusb_dib3000mb_table,
-};
-
-module_usb_driver(dibusb_driver);
-
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
-MODULE_DESCRIPTION("Driver for DiBcom USB DVB-T devices (DiB3000M-B based)");
-MODULE_VERSION("1.0");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/dibusb-mc.c b/drivers/media/dvb/dvb-usb/dibusb-mc.c
deleted file mode 100644
index 9d1a59d0..0000000
--- a/drivers/media/dvb/dvb-usb/dibusb-mc.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/* DVB USB compliant linux driver for mobile DVB-T USB devices based on
- * reference designs made by DiBcom (http://www.dibcom.fr/) (DiB3000M-C/P)
- *
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
- *
- * based on GPL code from DiBcom, which has
- * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr)
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "dibusb.h"
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-/* USB Driver stuff */
-static struct dvb_usb_device_properties dibusb_mc_properties;
-
-static int dibusb_mc_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	return dvb_usb_device_init(intf, &dibusb_mc_properties, THIS_MODULE,
-				   NULL, adapter_nr);
-}
-
-/* do not change the order of the ID table */
-static struct usb_device_id dibusb_dib3000mc_table [] = {
-/* 00 */	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3001_COLD) },
-/* 01 */	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3001_WARM) },
-/* 02 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_USB2_COLD) },
-/* 03 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_USB2_WARM) }, // ( ? )
-/* 04 */	{ USB_DEVICE(USB_VID_LITEON,		USB_PID_LITEON_DVB_T_COLD) },
-/* 05 */	{ USB_DEVICE(USB_VID_LITEON,		USB_PID_LITEON_DVB_T_WARM) },
-/* 06 */	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_DIGIVOX_MINI_SL_COLD) },
-/* 07 */	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_DIGIVOX_MINI_SL_WARM) },
-/* 08 */	{ USB_DEVICE(USB_VID_GRANDTEC,          USB_PID_GRANDTEC_DVBT_USB2_COLD) },
-/* 09 */	{ USB_DEVICE(USB_VID_GRANDTEC,          USB_PID_GRANDTEC_DVBT_USB2_WARM) },
-/* 10 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ARTEC_T14_COLD) },
-/* 11 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ARTEC_T14_WARM) },
-/* 12 */	{ USB_DEVICE(USB_VID_LEADTEK,		USB_PID_WINFAST_DTV_DONGLE_COLD) },
-/* 13 */	{ USB_DEVICE(USB_VID_LEADTEK,		USB_PID_WINFAST_DTV_DONGLE_WARM) },
-/* 14 */	{ USB_DEVICE(USB_VID_HUMAX_COEX,	USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD) },
-/* 15 */	{ USB_DEVICE(USB_VID_HUMAX_COEX,	USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM) },
-			{ }		/* Terminating entry */
-};
-MODULE_DEVICE_TABLE (usb, dibusb_dib3000mc_table);
-
-static struct dvb_usb_device_properties dibusb_mc_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = CYPRESS_FX2,
-	.firmware = "dvb-usb-dibusb-6.0.0.8.fw",
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-			.pid_filter_count = 32,
-			.streaming_ctrl   = dibusb2_0_streaming_ctrl,
-			.pid_filter       = dibusb_pid_filter,
-			.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
-			.frontend_attach  = dibusb_dib3000mc_frontend_attach,
-			.tuner_attach     = dibusb_dib3000mc_tuner_attach,
-
-	/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 8,
-				.endpoint = 0x06,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			},
-		}},
-			.size_of_priv     = sizeof(struct dibusb_state),
-		}
-	},
-	.power_ctrl       = dibusb2_0_power_ctrl,
-
-	.rc.legacy = {
-		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_map_table     = rc_map_dibusb_table,
-		.rc_map_size      = 111, /* FIXME */
-		.rc_query         = dibusb_rc_query,
-	},
-
-	.i2c_algo         = &dibusb_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 8,
-	.devices = {
-		{   "DiBcom USB2.0 DVB-T reference design (MOD3000P)",
-			{ &dibusb_dib3000mc_table[0], NULL },
-			{ &dibusb_dib3000mc_table[1], NULL },
-		},
-		{   "Artec T1 USB2.0 TVBOX (please check the warm ID)",
-			{ &dibusb_dib3000mc_table[2], NULL },
-			{ &dibusb_dib3000mc_table[3], NULL },
-		},
-		{   "LITE-ON USB2.0 DVB-T Tuner",
-		    /* Also rebranded as Intuix S800, Toshiba */
-			{ &dibusb_dib3000mc_table[4], NULL },
-			{ &dibusb_dib3000mc_table[5], NULL },
-		},
-		{   "MSI Digivox Mini SL",
-			{ &dibusb_dib3000mc_table[6], NULL },
-			{ &dibusb_dib3000mc_table[7], NULL },
-		},
-		{   "GRAND - USB2.0 DVB-T adapter",
-			{ &dibusb_dib3000mc_table[8], NULL },
-			{ &dibusb_dib3000mc_table[9], NULL },
-		},
-		{   "Artec T14 - USB2.0 DVB-T",
-			{ &dibusb_dib3000mc_table[10], NULL },
-			{ &dibusb_dib3000mc_table[11], NULL },
-		},
-		{   "Leadtek - USB2.0 Winfast DTV dongle",
-			{ &dibusb_dib3000mc_table[12], NULL },
-			{ &dibusb_dib3000mc_table[13], NULL },
-		},
-		{   "Humax/Coex DVB-T USB Stick 2.0 High Speed",
-			{ &dibusb_dib3000mc_table[14], NULL },
-			{ &dibusb_dib3000mc_table[15], NULL },
-		},
-		{ NULL },
-	}
-};
-
-static struct usb_driver dibusb_mc_driver = {
-	.name		= "dvb_usb_dibusb_mc",
-	.probe		= dibusb_mc_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table	= dibusb_dib3000mc_table,
-};
-
-module_usb_driver(dibusb_mc_driver);
-
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
-MODULE_DESCRIPTION("Driver for DiBcom USB2.0 DVB-T (DiB3000M-C/P based) devices");
-MODULE_VERSION("1.0");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/dibusb.h b/drivers/media/dvb/dvb-usb/dibusb.h
deleted file mode 100644
index e47c321..0000000
--- a/drivers/media/dvb/dvb-usb/dibusb.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/* Header file for all dibusb-based-receivers.
- *
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#ifndef _DVB_USB_DIBUSB_H_
-#define _DVB_USB_DIBUSB_H_
-
-#ifndef DVB_USB_LOG_PREFIX
- #define DVB_USB_LOG_PREFIX "dibusb"
-#endif
-#include "dvb-usb.h"
-
-#include "dib3000.h"
-#include "dib3000mc.h"
-#include "mt2060.h"
-
-/*
- * protocol of all dibusb related devices
- */
-
-/*
- * bulk msg to/from endpoint 0x01
- *
- * general structure:
- * request_byte parameter_bytes
- */
-
-#define DIBUSB_REQ_START_READ			0x00
-#define DIBUSB_REQ_START_DEMOD			0x01
-
-/*
- * i2c read
- * bulk write: 0x02 ((7bit i2c_addr << 1) & 0x01) register_bytes length_word
- * bulk read:  byte_buffer (length_word bytes)
- */
-#define DIBUSB_REQ_I2C_READ			0x02
-
-/*
- * i2c write
- * bulk write: 0x03 (7bit i2c_addr << 1) register_bytes value_bytes
- */
-#define DIBUSB_REQ_I2C_WRITE			0x03
-
-/*
- * polling the value of the remote control
- * bulk write: 0x04
- * bulk read:  byte_buffer (5 bytes)
- */
-#define DIBUSB_REQ_POLL_REMOTE       0x04
-
-/* additional status values for Hauppauge Remote Control Protocol */
-#define DIBUSB_RC_HAUPPAUGE_KEY_PRESSED	0x01
-#define DIBUSB_RC_HAUPPAUGE_KEY_EMPTY	0x03
-
-/* streaming mode:
- * bulk write: 0x05 mode_byte
- *
- * mode_byte is mostly 0x00
- */
-#define DIBUSB_REQ_SET_STREAMING_MODE	0x05
-
-/* interrupt the internal read loop, when blocking */
-#define DIBUSB_REQ_INTR_READ			0x06
-
-/* io control
- * 0x07 cmd_byte param_bytes
- *
- * param_bytes can be up to 32 bytes
- *
- * cmd_byte function    parameter name
- * 0x00     power mode
- *                      0x00      sleep
- *                      0x01      wakeup
- *
- * 0x01     enable streaming
- * 0x02     disable streaming
- *
- *
- */
-#define DIBUSB_REQ_SET_IOCTL			0x07
-
-/* IOCTL commands */
-
-/* change the power mode in firmware */
-#define DIBUSB_IOCTL_CMD_POWER_MODE		0x00
-#define DIBUSB_IOCTL_POWER_SLEEP			0x00
-#define DIBUSB_IOCTL_POWER_WAKEUP			0x01
-
-/* modify streaming of the FX2 */
-#define DIBUSB_IOCTL_CMD_ENABLE_STREAM	0x01
-#define DIBUSB_IOCTL_CMD_DISABLE_STREAM	0x02
-
-struct dibusb_state {
-	struct dib_fe_xfer_ops ops;
-	int mt2060_present;
-	u8 tuner_addr;
-};
-
-struct dibusb_device_state {
-	/* for RC5 remote control */
-	int old_toggle;
-	int last_repeat_count;
-};
-
-extern struct i2c_algorithm dibusb_i2c_algo;
-
-extern int dibusb_dib3000mc_frontend_attach(struct dvb_usb_adapter *);
-extern int dibusb_dib3000mc_tuner_attach (struct dvb_usb_adapter *);
-
-extern int dibusb_streaming_ctrl(struct dvb_usb_adapter *, int);
-extern int dibusb_pid_filter(struct dvb_usb_adapter *, int, u16, int);
-extern int dibusb_pid_filter_ctrl(struct dvb_usb_adapter *, int);
-extern int dibusb2_0_streaming_ctrl(struct dvb_usb_adapter *, int);
-
-extern int dibusb_power_ctrl(struct dvb_usb_device *, int);
-extern int dibusb2_0_power_ctrl(struct dvb_usb_device *, int);
-
-#define DEFAULT_RC_INTERVAL 150
-//#define DEFAULT_RC_INTERVAL 100000
-
-extern struct rc_map_table rc_map_dibusb_table[];
-extern int dibusb_rc_query(struct dvb_usb_device *, u32 *, int *);
-extern int dibusb_read_eeprom_byte(struct dvb_usb_device *, u8, u8 *);
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/dvb/dvb-usb/digitv.c
deleted file mode 100644
index ff34419..0000000
--- a/drivers/media/dvb/dvb-usb/digitv.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/* DVB USB compliant linux driver for Nebula Electronics uDigiTV DVB-T USB2.0
- * receiver
- *
- * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de)
- *
- * partly based on the SDK published by Nebula Electronics
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "digitv.h"
-
-#include "mt352.h"
-#include "nxt6000.h"
-
-/* debug */
-static int dvb_usb_digitv_debug;
-module_param_named(debug,dvb_usb_digitv_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS);
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-#define deb_rc(args...)   dprintk(dvb_usb_digitv_debug,0x01,args)
-
-static int digitv_ctrl_msg(struct dvb_usb_device *d,
-		u8 cmd, u8 vv, u8 *wbuf, int wlen, u8 *rbuf, int rlen)
-{
-	int wo = (rbuf == NULL || rlen == 0); /* write-only */
-	u8 sndbuf[7],rcvbuf[7];
-	memset(sndbuf,0,7); memset(rcvbuf,0,7);
-
-	sndbuf[0] = cmd;
-	sndbuf[1] = vv;
-	sndbuf[2] = wo ? wlen : rlen;
-
-	if (wo) {
-		memcpy(&sndbuf[3],wbuf,wlen);
-		dvb_usb_generic_write(d,sndbuf,7);
-	} else {
-		dvb_usb_generic_rw(d,sndbuf,7,rcvbuf,7,10);
-		memcpy(rbuf,&rcvbuf[3],rlen);
-	}
-	return 0;
-}
-
-/* I2C */
-static int digitv_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	int i;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	if (num > 2)
-		warn("more than 2 i2c messages at a time is not handled yet. TODO.");
-
-	for (i = 0; i < num; i++) {
-		/* write/read request */
-		if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
-			if (digitv_ctrl_msg(d, USB_READ_COFDM, msg[i].buf[0], NULL, 0,
-						msg[i+1].buf,msg[i+1].len) < 0)
-				break;
-			i++;
-		} else
-			if (digitv_ctrl_msg(d,USB_WRITE_COFDM, msg[i].buf[0],
-						&msg[i].buf[1],msg[i].len-1,NULL,0) < 0)
-				break;
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-	return i;
-}
-
-static u32 digitv_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm digitv_i2c_algo = {
-	.master_xfer   = digitv_i2c_xfer,
-	.functionality = digitv_i2c_func,
-};
-
-/* Callbacks for DVB USB */
-static int digitv_identify_state (struct usb_device *udev, struct
-		dvb_usb_device_properties *props, struct dvb_usb_device_description **desc,
-		int *cold)
-{
-	*cold = udev->descriptor.iManufacturer == 0 && udev->descriptor.iProduct == 0;
-	return 0;
-}
-
-static int digitv_mt352_demod_init(struct dvb_frontend *fe)
-{
-	static u8 reset_buf[] = { 0x89, 0x38,  0x8a, 0x2d, 0x50, 0x80 };
-	static u8 init_buf[] = { 0x68, 0xa0,  0x8e, 0x40,  0x53, 0x50,
-			0x67, 0x20,  0x7d, 0x01,  0x7c, 0x00,  0x7a, 0x00,
-			0x79, 0x20,  0x57, 0x05,  0x56, 0x31,  0x88, 0x0f,
-			0x75, 0x32 };
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(reset_buf); i += 2)
-		mt352_write(fe, &reset_buf[i], 2);
-
-	msleep(1);
-
-	for (i = 0; i < ARRAY_SIZE(init_buf); i += 2)
-		mt352_write(fe, &init_buf[i], 2);
-
-	return 0;
-}
-
-static struct mt352_config digitv_mt352_config = {
-	.demod_init = digitv_mt352_demod_init,
-};
-
-static int digitv_nxt6000_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	u8 b[5];
-
-	fe->ops.tuner_ops.calc_regs(fe, b, sizeof(b));
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	return digitv_ctrl_msg(adap->dev, USB_WRITE_TUNER, 0, &b[1], 4, NULL, 0);
-}
-
-static struct nxt6000_config digitv_nxt6000_config = {
-	.clock_inversion = 1,
-};
-
-static int digitv_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct digitv_state *st = adap->dev->priv;
-
-	adap->fe_adap[0].fe = dvb_attach(mt352_attach, &digitv_mt352_config,
-					 &adap->dev->i2c_adap);
-	if ((adap->fe_adap[0].fe) != NULL) {
-		st->is_nxt6000 = 0;
-		return 0;
-	}
-	adap->fe_adap[0].fe = dvb_attach(nxt6000_attach,
-					 &digitv_nxt6000_config,
-					 &adap->dev->i2c_adap);
-	if ((adap->fe_adap[0].fe) != NULL) {
-		st->is_nxt6000 = 1;
-		return 0;
-	}
-	return -EIO;
-}
-
-static int digitv_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct digitv_state *st = adap->dev->priv;
-
-	if (!dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, NULL, DVB_PLL_TDED4))
-		return -ENODEV;
-
-	if (st->is_nxt6000)
-		adap->fe_adap[0].fe->ops.tuner_ops.set_params = digitv_nxt6000_tuner_set_params;
-
-	return 0;
-}
-
-static struct rc_map_table rc_map_digitv_table[] = {
-	{ 0x5f55, KEY_0 },
-	{ 0x6f55, KEY_1 },
-	{ 0x9f55, KEY_2 },
-	{ 0xaf55, KEY_3 },
-	{ 0x5f56, KEY_4 },
-	{ 0x6f56, KEY_5 },
-	{ 0x9f56, KEY_6 },
-	{ 0xaf56, KEY_7 },
-	{ 0x5f59, KEY_8 },
-	{ 0x6f59, KEY_9 },
-	{ 0x9f59, KEY_TV },
-	{ 0xaf59, KEY_AUX },
-	{ 0x5f5a, KEY_DVD },
-	{ 0x6f5a, KEY_POWER },
-	{ 0x9f5a, KEY_CAMERA },     /* labelled 'Picture' */
-	{ 0xaf5a, KEY_AUDIO },
-	{ 0x5f65, KEY_INFO },
-	{ 0x6f65, KEY_F13 },     /* 16:9 */
-	{ 0x9f65, KEY_F14 },     /* 14:9 */
-	{ 0xaf65, KEY_EPG },
-	{ 0x5f66, KEY_EXIT },
-	{ 0x6f66, KEY_MENU },
-	{ 0x9f66, KEY_UP },
-	{ 0xaf66, KEY_DOWN },
-	{ 0x5f69, KEY_LEFT },
-	{ 0x6f69, KEY_RIGHT },
-	{ 0x9f69, KEY_ENTER },
-	{ 0xaf69, KEY_CHANNELUP },
-	{ 0x5f6a, KEY_CHANNELDOWN },
-	{ 0x6f6a, KEY_VOLUMEUP },
-	{ 0x9f6a, KEY_VOLUMEDOWN },
-	{ 0xaf6a, KEY_RED },
-	{ 0x5f95, KEY_GREEN },
-	{ 0x6f95, KEY_YELLOW },
-	{ 0x9f95, KEY_BLUE },
-	{ 0xaf95, KEY_SUBTITLE },
-	{ 0x5f96, KEY_F15 },     /* AD */
-	{ 0x6f96, KEY_TEXT },
-	{ 0x9f96, KEY_MUTE },
-	{ 0xaf96, KEY_REWIND },
-	{ 0x5f99, KEY_STOP },
-	{ 0x6f99, KEY_PLAY },
-	{ 0x9f99, KEY_FASTFORWARD },
-	{ 0xaf99, KEY_F16 },     /* chapter */
-	{ 0x5f9a, KEY_PAUSE },
-	{ 0x6f9a, KEY_PLAY },
-	{ 0x9f9a, KEY_RECORD },
-	{ 0xaf9a, KEY_F17 },     /* picture in picture */
-	{ 0x5fa5, KEY_KPPLUS },  /* zoom in */
-	{ 0x6fa5, KEY_KPMINUS }, /* zoom out */
-	{ 0x9fa5, KEY_F18 },     /* capture */
-	{ 0xafa5, KEY_F19 },     /* web */
-	{ 0x5fa6, KEY_EMAIL },
-	{ 0x6fa6, KEY_PHONE },
-	{ 0x9fa6, KEY_PC },
-};
-
-static int digitv_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
-{
-	int i;
-	u8 key[5];
-	u8 b[4] = { 0 };
-
-	*event = 0;
-	*state = REMOTE_NO_KEY_PRESSED;
-
-	digitv_ctrl_msg(d,USB_READ_REMOTE,0,NULL,0,&key[1],4);
-
-	/* Tell the device we've read the remote. Not sure how necessary
-	   this is, but the Nebula SDK does it. */
-	digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
-
-	/* if something is inside the buffer, simulate key press */
-	if (key[1] != 0)
-	{
-		  for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
-			if (rc5_custom(&d->props.rc.legacy.rc_map_table[i]) == key[1] &&
-			    rc5_data(&d->props.rc.legacy.rc_map_table[i]) == key[2]) {
-				*event = d->props.rc.legacy.rc_map_table[i].keycode;
-				*state = REMOTE_KEY_PRESSED;
-				return 0;
-			}
-		}
-	}
-
-	if (key[0] != 0)
-		deb_rc("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]);
-	return 0;
-}
-
-/* DVB USB Driver stuff */
-static struct dvb_usb_device_properties digitv_properties;
-
-static int digitv_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	struct dvb_usb_device *d;
-	int ret = dvb_usb_device_init(intf, &digitv_properties, THIS_MODULE, &d,
-				      adapter_nr);
-	if (ret == 0) {
-		u8 b[4] = { 0 };
-
-		if (d != NULL) { /* do that only when the firmware is loaded */
-			b[0] = 1;
-			digitv_ctrl_msg(d,USB_WRITE_REMOTE_TYPE,0,b,4,NULL,0);
-
-			b[0] = 0;
-			digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
-		}
-	}
-	return ret;
-}
-
-static struct usb_device_id digitv_table [] = {
-		{ USB_DEVICE(USB_VID_ANCHOR, USB_PID_NEBULA_DIGITV) },
-		{ }		/* Terminating entry */
-};
-MODULE_DEVICE_TABLE (usb, digitv_table);
-
-static struct dvb_usb_device_properties digitv_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = CYPRESS_FX2,
-	.firmware = "dvb-usb-digitv-02.fw",
-
-	.size_of_priv = sizeof(struct digitv_state),
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.frontend_attach  = digitv_frontend_attach,
-			.tuner_attach     = digitv_tuner_attach,
-
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 7,
-				.endpoint = 0x02,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			},
-		}},
-		}
-	},
-	.identify_state   = digitv_identify_state,
-
-	.rc.legacy = {
-		.rc_interval      = 1000,
-		.rc_map_table     = rc_map_digitv_table,
-		.rc_map_size      = ARRAY_SIZE(rc_map_digitv_table),
-		.rc_query         = digitv_rc_query,
-	},
-
-	.i2c_algo         = &digitv_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 1,
-	.devices = {
-		{   "Nebula Electronics uDigiTV DVB-T USB2.0)",
-			{ &digitv_table[0], NULL },
-			{ NULL },
-		},
-		{ NULL },
-	}
-};
-
-static struct usb_driver digitv_driver = {
-	.name		= "dvb_usb_digitv",
-	.probe		= digitv_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table	= digitv_table,
-};
-
-module_usb_driver(digitv_driver);
-
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
-MODULE_DESCRIPTION("Driver for Nebula Electronics uDigiTV DVB-T USB2.0");
-MODULE_VERSION("1.0-alpha");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/digitv.h b/drivers/media/dvb/dvb-usb/digitv.h
deleted file mode 100644
index 908c09f..0000000
--- a/drivers/media/dvb/dvb-usb/digitv.h
+++ /dev/null
@@ -1,66 +0,0 @@
-#ifndef _DVB_USB_DIGITV_H_
-#define _DVB_USB_DIGITV_H_
-
-#define DVB_USB_LOG_PREFIX "digitv"
-#include "dvb-usb.h"
-
-struct digitv_state {
-    int is_nxt6000;
-};
-
-/* protocol (from usblogging and the SDK:
- *
- * Always 7 bytes bulk message(s) for controlling
- *
- * First byte describes the command. Reads are 2 consecutive transfer (as always).
- *
- * General structure:
- *
- * write or first message of a read:
- * <cmdbyte> VV <len> B0 B1 B2 B3
- *
- * second message of a read
- * <cmdbyte> VV <len> R0 R1 R2 R3
- *
- * whereas 0 < len <= 4
- *
- * I2C address is stored somewhere inside the device.
- *
- * 0x01 read from EEPROM
- *  VV = offset; B* = 0; R* = value(s)
- *
- * 0x02 read register of the COFDM
- *  VV = register; B* = 0; R* = value(s)
- *
- * 0x05 write register of the COFDM
- *  VV = register; B* = value(s);
- *
- * 0x06 write to the tuner (only for NXT6000)
- *  VV = 0; B* = PLL data; len = 4;
- *
- * 0x03 read remote control
- *  VV = 0; B* = 0; len = 4; R* = key
- *
- * 0x07 write to the remote (don't know why one should this, resetting ?)
- *  VV = 0; B* = key; len = 4;
- *
- * 0x08 write remote type
- *  VV = 0; B[0] = 0x01, len = 4
- *
- * 0x09 write device init
- *  TODO
- */
-#define USB_READ_EEPROM         1
-
-#define USB_READ_COFDM          2
-#define USB_WRITE_COFDM         5
-
-#define USB_WRITE_TUNER         6
-
-#define USB_READ_REMOTE         3
-#define USB_WRITE_REMOTE        7
-#define USB_WRITE_REMOTE_TYPE   8
-
-#define USB_DEV_INIT            9
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/dtt200u-fe.c b/drivers/media/dvb/dvb-usb/dtt200u-fe.c
deleted file mode 100644
index 3d81daa..0000000
--- a/drivers/media/dvb/dvb-usb/dtt200u-fe.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/* Frontend part of the Linux driver for the WideView/ Yakumo/ Hama/
- * Typhoon/ Yuan DVB-T USB2.0 receiver.
- *
- * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@desy.de>
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "dtt200u.h"
-
-struct dtt200u_fe_state {
-	struct dvb_usb_device *d;
-
-	fe_status_t stat;
-
-	struct dtv_frontend_properties fep;
-	struct dvb_frontend frontend;
-};
-
-static int dtt200u_fe_read_status(struct dvb_frontend* fe, fe_status_t *stat)
-{
-	struct dtt200u_fe_state *state = fe->demodulator_priv;
-	u8 st = GET_TUNE_STATUS, b[3];
-
-	dvb_usb_generic_rw(state->d,&st,1,b,3,0);
-
-	switch (b[0]) {
-		case 0x01:
-			*stat = FE_HAS_SIGNAL | FE_HAS_CARRIER |
-				FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
-			break;
-		case 0x00: /* pending */
-			*stat = FE_TIMEDOUT; /* during set_frontend */
-			break;
-		default:
-		case 0x02: /* failed */
-			*stat = 0;
-			break;
-	}
-	return 0;
-}
-
-static int dtt200u_fe_read_ber(struct dvb_frontend* fe, u32 *ber)
-{
-	struct dtt200u_fe_state *state = fe->demodulator_priv;
-	u8 bw = GET_VIT_ERR_CNT,b[3];
-	dvb_usb_generic_rw(state->d,&bw,1,b,3,0);
-	*ber = (b[0] << 16) | (b[1] << 8) | b[2];
-	return 0;
-}
-
-static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
-{
-	struct dtt200u_fe_state *state = fe->demodulator_priv;
-	u8 bw = GET_RS_UNCOR_BLK_CNT,b[2];
-
-	dvb_usb_generic_rw(state->d,&bw,1,b,2,0);
-	*unc = (b[0] << 8) | b[1];
-	return 0;
-}
-
-static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
-{
-	struct dtt200u_fe_state *state = fe->demodulator_priv;
-	u8 bw = GET_AGC, b;
-	dvb_usb_generic_rw(state->d,&bw,1,&b,1,0);
-	*strength = (b << 8) | b;
-	return 0;
-}
-
-static int dtt200u_fe_read_snr(struct dvb_frontend* fe, u16 *snr)
-{
-	struct dtt200u_fe_state *state = fe->demodulator_priv;
-	u8 bw = GET_SNR,br;
-	dvb_usb_generic_rw(state->d,&bw,1,&br,1,0);
-	*snr = ~((br << 8) | br);
-	return 0;
-}
-
-static int dtt200u_fe_init(struct dvb_frontend* fe)
-{
-	struct dtt200u_fe_state *state = fe->demodulator_priv;
-	u8 b = SET_INIT;
-	return dvb_usb_generic_write(state->d,&b,1);
-}
-
-static int dtt200u_fe_sleep(struct dvb_frontend* fe)
-{
-	return dtt200u_fe_init(fe);
-}
-
-static int dtt200u_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
-{
-	tune->min_delay_ms = 1500;
-	tune->step_size = 0;
-	tune->max_drift = 0;
-	return 0;
-}
-
-static int dtt200u_fe_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
-	struct dtt200u_fe_state *state = fe->demodulator_priv;
-	int i;
-	fe_status_t st;
-	u16 freq = fep->frequency / 250000;
-	u8 bwbuf[2] = { SET_BANDWIDTH, 0 },freqbuf[3] = { SET_RF_FREQ, 0, 0 };
-
-	switch (fep->bandwidth_hz) {
-	case 8000000:
-		bwbuf[1] = 8;
-		break;
-	case 7000000:
-		bwbuf[1] = 7;
-		break;
-	case 6000000:
-		bwbuf[1] = 6;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	dvb_usb_generic_write(state->d,bwbuf,2);
-
-	freqbuf[1] = freq & 0xff;
-	freqbuf[2] = (freq >> 8) & 0xff;
-	dvb_usb_generic_write(state->d,freqbuf,3);
-
-	for (i = 0; i < 30; i++) {
-		msleep(20);
-		dtt200u_fe_read_status(fe, &st);
-		if (st & FE_TIMEDOUT)
-			continue;
-	}
-
-	return 0;
-}
-
-static int dtt200u_fe_get_frontend(struct dvb_frontend* fe)
-{
-	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
-	struct dtt200u_fe_state *state = fe->demodulator_priv;
-	memcpy(fep, &state->fep, sizeof(struct dtv_frontend_properties));
-	return 0;
-}
-
-static void dtt200u_fe_release(struct dvb_frontend* fe)
-{
-	struct dtt200u_fe_state *state = (struct dtt200u_fe_state*) fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops dtt200u_fe_ops;
-
-struct dvb_frontend* dtt200u_fe_attach(struct dvb_usb_device *d)
-{
-	struct dtt200u_fe_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct dtt200u_fe_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	deb_info("attaching frontend dtt200u\n");
-
-	state->d = d;
-
-	memcpy(&state->frontend.ops,&dtt200u_fe_ops,sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-
-	return &state->frontend;
-error:
-	return NULL;
-}
-
-static struct dvb_frontend_ops dtt200u_fe_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name			= "WideView USB DVB-T",
-		.frequency_min		= 44250000,
-		.frequency_max		= 867250000,
-		.frequency_stepsize	= 250000,
-		.caps = FE_CAN_INVERSION_AUTO |
-				FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-				FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-				FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-				FE_CAN_TRANSMISSION_MODE_AUTO |
-				FE_CAN_GUARD_INTERVAL_AUTO |
-				FE_CAN_RECOVER |
-				FE_CAN_HIERARCHY_AUTO,
-	},
-
-	.release = dtt200u_fe_release,
-
-	.init = dtt200u_fe_init,
-	.sleep = dtt200u_fe_sleep,
-
-	.set_frontend = dtt200u_fe_set_frontend,
-	.get_frontend = dtt200u_fe_get_frontend,
-	.get_tune_settings = dtt200u_fe_get_tune_settings,
-
-	.read_status = dtt200u_fe_read_status,
-	.read_ber = dtt200u_fe_read_ber,
-	.read_signal_strength = dtt200u_fe_read_signal_strength,
-	.read_snr = dtt200u_fe_read_snr,
-	.read_ucblocks = dtt200u_fe_read_unc_blocks,
-};
diff --git a/drivers/media/dvb/dvb-usb/dtt200u.c b/drivers/media/dvb/dvb-usb/dtt200u.c
deleted file mode 100644
index 66f205c..0000000
--- a/drivers/media/dvb/dvb-usb/dtt200u.c
+++ /dev/null
@@ -1,368 +0,0 @@
-/* DVB USB library compliant Linux driver for the WideView/ Yakumo/ Hama/
- * Typhoon/ Yuan/ Miglia DVB-T USB2.0 receiver.
- *
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
- *
- * Thanks to Steve Chang from WideView for providing support for the WT-220U.
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "dtt200u.h"
-
-/* debug */
-int dvb_usb_dtt200u_debug;
-module_param_named(debug,dvb_usb_dtt200u_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2 (or-able))." DVB_USB_DEBUG_STATUS);
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	u8 b = SET_INIT;
-
-	if (onoff)
-		dvb_usb_generic_write(d,&b,2);
-
-	return 0;
-}
-
-static int dtt200u_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	u8 b_streaming[2] = { SET_STREAMING, onoff };
-	u8 b_rst_pid = RESET_PID_FILTER;
-
-	dvb_usb_generic_write(adap->dev, b_streaming, 2);
-
-	if (onoff == 0)
-		dvb_usb_generic_write(adap->dev, &b_rst_pid, 1);
-	return 0;
-}
-
-static int dtt200u_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff)
-{
-	u8 b_pid[4];
-	pid = onoff ? pid : 0;
-
-	b_pid[0] = SET_PID_FILTER;
-	b_pid[1] = index;
-	b_pid[2] = pid & 0xff;
-	b_pid[3] = (pid >> 8) & 0x1f;
-
-	return dvb_usb_generic_write(adap->dev, b_pid, 4);
-}
-
-/* remote control */
-/* key list for the tiny remote control (Yakumo, don't know about the others) */
-static struct rc_map_table rc_map_dtt200u_table[] = {
-	{ 0x8001, KEY_MUTE },
-	{ 0x8002, KEY_CHANNELDOWN },
-	{ 0x8003, KEY_VOLUMEDOWN },
-	{ 0x8004, KEY_1 },
-	{ 0x8005, KEY_2 },
-	{ 0x8006, KEY_3 },
-	{ 0x8007, KEY_4 },
-	{ 0x8008, KEY_5 },
-	{ 0x8009, KEY_6 },
-	{ 0x800a, KEY_7 },
-	{ 0x800c, KEY_ZOOM },
-	{ 0x800d, KEY_0 },
-	{ 0x800e, KEY_SELECT },
-	{ 0x8012, KEY_POWER },
-	{ 0x801a, KEY_CHANNELUP },
-	{ 0x801b, KEY_8 },
-	{ 0x801e, KEY_VOLUMEUP },
-	{ 0x801f, KEY_9 },
-};
-
-static int dtt200u_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
-{
-	u8 key[5],cmd = GET_RC_CODE;
-	dvb_usb_generic_rw(d,&cmd,1,key,5,0);
-	dvb_usb_nec_rc_key_to_event(d,key,event,state);
-	if (key[0] != 0)
-		deb_info("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]);
-	return 0;
-}
-
-static int dtt200u_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	adap->fe_adap[0].fe = dtt200u_fe_attach(adap->dev);
-	return 0;
-}
-
-static struct dvb_usb_device_properties dtt200u_properties;
-static struct dvb_usb_device_properties wt220u_fc_properties;
-static struct dvb_usb_device_properties wt220u_properties;
-static struct dvb_usb_device_properties wt220u_zl0353_properties;
-static struct dvb_usb_device_properties wt220u_miglia_properties;
-
-static int dtt200u_usb_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	if (0 == dvb_usb_device_init(intf, &dtt200u_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &wt220u_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &wt220u_fc_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &wt220u_zl0353_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &wt220u_miglia_properties,
-				     THIS_MODULE, NULL, adapter_nr))
-		return 0;
-
-	return -ENODEV;
-}
-
-static struct usb_device_id dtt200u_usb_table [] = {
-	{ USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_DTT200U_COLD) },
-	{ USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_DTT200U_WARM) },
-	{ USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_COLD)  },
-	{ USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_WARM)  },
-	{ USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_ZL0353_COLD)  },
-	{ USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_ZL0353_WARM)  },
-	{ USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_FC_COLD)  },
-	{ USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_FC_WARM)  },
-	{ USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_ZAP250_COLD)  },
-	{ USB_DEVICE(USB_VID_MIGLIA, USB_PID_WT220U_ZAP250_COLD)  },
-	{ 0 },
-};
-MODULE_DEVICE_TABLE(usb, dtt200u_usb_table);
-
-static struct dvb_usb_device_properties dtt200u_properties = {
-	.usb_ctrl = CYPRESS_FX2,
-	.firmware = "dvb-usb-dtt200u-01.fw",
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_NEED_PID_FILTERING,
-			.pid_filter_count = 15,
-
-	.streaming_ctrl  = dtt200u_streaming_ctrl,
-	.pid_filter      = dtt200u_pid_filter,
-	.frontend_attach = dtt200u_frontend_attach,
-	/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-		.count = 7,
-		.endpoint = 0x02,
-		.u = {
-			.bulk = {
-				.buffersize = 4096,
-			}
-		}
-	},
-		}},
-		}
-	},
-	.power_ctrl      = dtt200u_power_ctrl,
-
-	.rc.legacy = {
-		.rc_interval     = 300,
-		.rc_map_table    = rc_map_dtt200u_table,
-		.rc_map_size     = ARRAY_SIZE(rc_map_dtt200u_table),
-		.rc_query        = dtt200u_rc_query,
-	},
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 1,
-	.devices = {
-		{ .name = "WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)",
-		  .cold_ids = { &dtt200u_usb_table[0], NULL },
-		  .warm_ids = { &dtt200u_usb_table[1], NULL },
-		},
-		{ NULL },
-	}
-};
-
-static struct dvb_usb_device_properties wt220u_properties = {
-	.usb_ctrl = CYPRESS_FX2,
-	.firmware = "dvb-usb-wt220u-02.fw",
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_NEED_PID_FILTERING,
-			.pid_filter_count = 15,
-
-	.streaming_ctrl  = dtt200u_streaming_ctrl,
-	.pid_filter      = dtt200u_pid_filter,
-	.frontend_attach = dtt200u_frontend_attach,
-	/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-		.count = 7,
-		.endpoint = 0x02,
-		.u = {
-			.bulk = {
-				.buffersize = 4096,
-			}
-		}
-	},
-		}},
-		}
-	},
-	.power_ctrl      = dtt200u_power_ctrl,
-
-	.rc.legacy = {
-		.rc_interval     = 300,
-		.rc_map_table      = rc_map_dtt200u_table,
-		.rc_map_size = ARRAY_SIZE(rc_map_dtt200u_table),
-		.rc_query        = dtt200u_rc_query,
-	},
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 1,
-	.devices = {
-		{ .name = "WideView WT-220U PenType Receiver (Typhoon/Freecom)",
-		  .cold_ids = { &dtt200u_usb_table[2], &dtt200u_usb_table[8], NULL },
-		  .warm_ids = { &dtt200u_usb_table[3], NULL },
-		},
-		{ NULL },
-	}
-};
-
-static struct dvb_usb_device_properties wt220u_fc_properties = {
-	.usb_ctrl = CYPRESS_FX2,
-	.firmware = "dvb-usb-wt220u-fc03.fw",
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_NEED_PID_FILTERING,
-			.pid_filter_count = 15,
-
-	.streaming_ctrl  = dtt200u_streaming_ctrl,
-	.pid_filter      = dtt200u_pid_filter,
-	.frontend_attach = dtt200u_frontend_attach,
-	/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-		.count = 7,
-				.endpoint = 0x06,
-		.u = {
-			.bulk = {
-				.buffersize = 4096,
-			}
-		}
-	},
-		}},
-		}
-	},
-	.power_ctrl      = dtt200u_power_ctrl,
-
-	.rc.legacy = {
-		.rc_interval     = 300,
-		.rc_map_table    = rc_map_dtt200u_table,
-		.rc_map_size     = ARRAY_SIZE(rc_map_dtt200u_table),
-		.rc_query        = dtt200u_rc_query,
-	},
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 1,
-	.devices = {
-		{ .name = "WideView WT-220U PenType Receiver (Typhoon/Freecom)",
-		  .cold_ids = { &dtt200u_usb_table[6], NULL },
-		  .warm_ids = { &dtt200u_usb_table[7], NULL },
-		},
-		{ NULL },
-	}
-};
-
-static struct dvb_usb_device_properties wt220u_zl0353_properties = {
-	.usb_ctrl = CYPRESS_FX2,
-	.firmware = "dvb-usb-wt220u-zl0353-01.fw",
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_NEED_PID_FILTERING,
-			.pid_filter_count = 15,
-
-			.streaming_ctrl  = dtt200u_streaming_ctrl,
-			.pid_filter      = dtt200u_pid_filter,
-			.frontend_attach = dtt200u_frontend_attach,
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 7,
-				.endpoint = 0x02,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			},
-		}},
-		}
-	},
-	.power_ctrl      = dtt200u_power_ctrl,
-
-	.rc.legacy = {
-		.rc_interval     = 300,
-		.rc_map_table    = rc_map_dtt200u_table,
-		.rc_map_size     = ARRAY_SIZE(rc_map_dtt200u_table),
-		.rc_query        = dtt200u_rc_query,
-	},
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 1,
-	.devices = {
-		{ .name = "WideView WT-220U PenType Receiver (based on ZL353)",
-		  .cold_ids = { &dtt200u_usb_table[4], NULL },
-		  .warm_ids = { &dtt200u_usb_table[5], NULL },
-		},
-		{ NULL },
-	}
-};
-
-static struct dvb_usb_device_properties wt220u_miglia_properties = {
-	.usb_ctrl = CYPRESS_FX2,
-	.firmware = "dvb-usb-wt220u-miglia-01.fw",
-
-	.num_adapters = 1,
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 1,
-	.devices = {
-		{ .name = "WideView WT-220U PenType Receiver (Miglia)",
-		  .cold_ids = { &dtt200u_usb_table[9], NULL },
-		  /* This device turns into WT220U_ZL0353_WARM when fw
-		     has been uploaded */
-		  .warm_ids = { NULL },
-		},
-		{ NULL },
-	}
-};
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver dtt200u_usb_driver = {
-	.name		= "dvb_usb_dtt200u",
-	.probe		= dtt200u_usb_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table	= dtt200u_usb_table,
-};
-
-module_usb_driver(dtt200u_usb_driver);
-
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
-MODULE_DESCRIPTION("Driver for the WideView/Yakumo/Hama/Typhoon/Club3D/Miglia DVB-T USB2.0 devices");
-MODULE_VERSION("1.0");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/dtt200u.h b/drivers/media/dvb/dvb-usb/dtt200u.h
deleted file mode 100644
index 005b0a7..0000000
--- a/drivers/media/dvb/dvb-usb/dtt200u.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* Common header file of Linux driver for the WideView/ Yakumo/ Hama/
- * Typhoon/ Yuan DVB-T USB2.0 receiver.
- *
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#ifndef _DVB_USB_DTT200U_H_
-#define _DVB_USB_DTT200U_H_
-
-#define DVB_USB_LOG_PREFIX "dtt200u"
-
-#include "dvb-usb.h"
-
-extern int dvb_usb_dtt200u_debug;
-#define deb_info(args...) dprintk(dvb_usb_dtt200u_debug,0x01,args)
-#define deb_xfer(args...) dprintk(dvb_usb_dtt200u_debug,0x02,args)
-
-/* guessed protocol description (reverse engineered):
- * read
- *  00 - USB type 0x02 for usb2.0, 0x01 for usb1.1
- *  88 - locking 2 bytes (0x80 0x40 == no signal, 0x89 0x20 == nice signal)
- */
-
-#define GET_SPEED		0x00
-#define GET_TUNE_STATUS		0x81
-#define GET_RC_CODE		0x84
-#define GET_CONFIGURATION	0x88
-#define GET_AGC			0x89
-#define GET_SNR			0x8a
-#define GET_VIT_ERR_CNT		0x8c
-#define GET_RS_ERR_CNT		0x8d
-#define GET_RS_UNCOR_BLK_CNT	0x8e
-
-/* write
- *  01 - init
- *  02 - frequency (divided by 250000)
- *  03 - bandwidth
- *  04 - pid table (index pid(7:0) pid(12:8))
- *  05 - reset the pid table
- *  08 - transfer switch
- */
-
-#define SET_INIT		0x01
-#define SET_RF_FREQ		0x02
-#define SET_BANDWIDTH		0x03
-#define SET_PID_FILTER		0x04
-#define RESET_PID_FILTER	0x05
-#define SET_STREAMING		0x08
-
-extern struct dvb_frontend * dtt200u_fe_attach(struct dvb_usb_device *d);
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/dtv5100.c b/drivers/media/dvb/dvb-usb/dtv5100.c
deleted file mode 100644
index 3d11df4..0000000
--- a/drivers/media/dvb/dvb-usb/dtv5100.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * DVB USB Linux driver for AME DTV-5100 USB2.0 DVB-T
- *
- * Copyright (C) 2008  Antoine Jacquet <royale@zerezo.com>
- * http://royale.zerezo.com/dtv5100/
- *
- * Inspired by gl861.c and au6610.c drivers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include "dtv5100.h"
-#include "zl10353.h"
-#include "qt1010.h"
-
-/* debug */
-static int dvb_usb_dtv5100_debug;
-module_param_named(debug, dvb_usb_dtv5100_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static int dtv5100_i2c_msg(struct dvb_usb_device *d, u8 addr,
-			   u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
-{
-	u8 request;
-	u8 type;
-	u16 value;
-	u16 index;
-
-	switch (wlen) {
-	case 1:
-		/* write { reg }, read { value } */
-		request = (addr == DTV5100_DEMOD_ADDR ? DTV5100_DEMOD_READ :
-							DTV5100_TUNER_READ);
-		type = USB_TYPE_VENDOR | USB_DIR_IN;
-		value = 0;
-		break;
-	case 2:
-		/* write { reg, value } */
-		request = (addr == DTV5100_DEMOD_ADDR ? DTV5100_DEMOD_WRITE :
-							DTV5100_TUNER_WRITE);
-		type = USB_TYPE_VENDOR | USB_DIR_OUT;
-		value = wbuf[1];
-		break;
-	default:
-		warn("wlen = %x, aborting.", wlen);
-		return -EINVAL;
-	}
-	index = (addr << 8) + wbuf[0];
-
-	msleep(1); /* avoid I2C errors */
-	return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), request,
-			       type, value, index, rbuf, rlen,
-			       DTV5100_USB_TIMEOUT);
-}
-
-/* I2C */
-static int dtv5100_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
-			    int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	int i;
-
-	if (num > 2)
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	for (i = 0; i < num; i++) {
-		/* write/read request */
-		if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
-			if (dtv5100_i2c_msg(d, msg[i].addr, msg[i].buf,
-					    msg[i].len, msg[i+1].buf,
-					    msg[i+1].len) < 0)
-				break;
-			i++;
-		} else if (dtv5100_i2c_msg(d, msg[i].addr, msg[i].buf,
-					   msg[i].len, NULL, 0) < 0)
-				break;
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-	return i;
-}
-
-static u32 dtv5100_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm dtv5100_i2c_algo = {
-	.master_xfer   = dtv5100_i2c_xfer,
-	.functionality = dtv5100_i2c_func,
-};
-
-/* Callbacks for DVB USB */
-static struct zl10353_config dtv5100_zl10353_config = {
-	.demod_address = DTV5100_DEMOD_ADDR,
-	.no_tuner = 1,
-	.parallel_ts = 1,
-};
-
-static int dtv5100_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	adap->fe_adap[0].fe = dvb_attach(zl10353_attach, &dtv5100_zl10353_config,
-			      &adap->dev->i2c_adap);
-	if (adap->fe_adap[0].fe == NULL)
-		return -EIO;
-
-	/* disable i2c gate, or it won't work... is this safe? */
-	adap->fe_adap[0].fe->ops.i2c_gate_ctrl = NULL;
-
-	return 0;
-}
-
-static struct qt1010_config dtv5100_qt1010_config = {
-	.i2c_address = DTV5100_TUNER_ADDR
-};
-
-static int dtv5100_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	return dvb_attach(qt1010_attach,
-			  adap->fe_adap[0].fe, &adap->dev->i2c_adap,
-			  &dtv5100_qt1010_config) == NULL ? -ENODEV : 0;
-}
-
-/* DVB USB Driver stuff */
-static struct dvb_usb_device_properties dtv5100_properties;
-
-static int dtv5100_probe(struct usb_interface *intf,
-			 const struct usb_device_id *id)
-{
-	int i, ret;
-	struct usb_device *udev = interface_to_usbdev(intf);
-
-	/* initialize non qt1010/zl10353 part? */
-	for (i = 0; dtv5100_init[i].request; i++) {
-		ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-				      dtv5100_init[i].request,
-				      USB_TYPE_VENDOR | USB_DIR_OUT,
-				      dtv5100_init[i].value,
-				      dtv5100_init[i].index, NULL, 0,
-				      DTV5100_USB_TIMEOUT);
-		if (ret)
-			return ret;
-	}
-
-	ret = dvb_usb_device_init(intf, &dtv5100_properties,
-				  THIS_MODULE, NULL, adapter_nr);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static struct usb_device_id dtv5100_table[] = {
-	{ USB_DEVICE(0x06be, 0xa232) },
-	{ }		/* Terminating entry */
-};
-MODULE_DEVICE_TABLE(usb, dtv5100_table);
-
-static struct dvb_usb_device_properties dtv5100_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-	.usb_ctrl = DEVICE_SPECIFIC,
-
-	.size_of_priv = 0,
-
-	.num_adapters = 1,
-	.adapter = {{
-		.num_frontends = 1,
-		.fe = {{
-		.frontend_attach = dtv5100_frontend_attach,
-		.tuner_attach    = dtv5100_tuner_attach,
-
-		.stream = {
-			.type = USB_BULK,
-			.count = 8,
-			.endpoint = 0x82,
-			.u = {
-				.bulk = {
-					.buffersize = 4096,
-				}
-			}
-		},
-		}},
-	} },
-
-	.i2c_algo = &dtv5100_i2c_algo,
-
-	.num_device_descs = 1,
-	.devices = {
-		{
-			.name = "AME DTV-5100 USB2.0 DVB-T",
-			.cold_ids = { NULL },
-			.warm_ids = { &dtv5100_table[0], NULL },
-		},
-	}
-};
-
-static struct usb_driver dtv5100_driver = {
-	.name		= "dvb_usb_dtv5100",
-	.probe		= dtv5100_probe,
-	.disconnect	= dvb_usb_device_exit,
-	.id_table	= dtv5100_table,
-};
-
-module_usb_driver(dtv5100_driver);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/dtv5100.h b/drivers/media/dvb/dvb-usb/dtv5100.h
deleted file mode 100644
index 93e96e0..0000000
--- a/drivers/media/dvb/dvb-usb/dtv5100.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * DVB USB Linux driver for AME DTV-5100 USB2.0 DVB-T
- *
- * Copyright (C) 2008  Antoine Jacquet <royale@zerezo.com>
- * http://royale.zerezo.com/dtv5100/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef _DVB_USB_DTV5100_H_
-#define _DVB_USB_DTV5100_H_
-
-#define DVB_USB_LOG_PREFIX "dtv5100"
-#include "dvb-usb.h"
-
-#define DTV5100_USB_TIMEOUT 500
-
-#define DTV5100_DEMOD_ADDR	0x00
-#define DTV5100_DEMOD_WRITE	0xc0
-#define DTV5100_DEMOD_READ	0xc1
-
-#define DTV5100_TUNER_ADDR	0xc4
-#define DTV5100_TUNER_WRITE	0xc7
-#define DTV5100_TUNER_READ	0xc8
-
-#define DRIVER_AUTHOR "Antoine Jacquet, http://royale.zerezo.com/"
-#define DRIVER_DESC "AME DTV-5100 USB2.0 DVB-T"
-
-static struct {
-	u8 request;
-	u8 value;
-	u16 index;
-} dtv5100_init[] = {
-	{ 0x000000c5, 0x00000000, 0x00000001 },
-	{ 0x000000c5, 0x00000001, 0x00000001 },
-	{ }		/* Terminating entry */
-};
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-common.h b/drivers/media/dvb/dvb-usb/dvb-usb-common.h
deleted file mode 100644
index 6b7b2a8..0000000
--- a/drivers/media/dvb/dvb-usb/dvb-usb-common.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* dvb-usb-common.h is part of the DVB USB library.
- *
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
- * see dvb-usb-init.c for copyright information.
- *
- * a header file containing prototypes and types for internal use of the dvb-usb-lib
- */
-#ifndef _DVB_USB_COMMON_H_
-#define _DVB_USB_COMMON_H_
-
-#define DVB_USB_LOG_PREFIX "dvb-usb"
-#include "dvb-usb.h"
-
-extern int dvb_usb_debug;
-extern int dvb_usb_disable_rc_polling;
-
-#define deb_info(args...)  dprintk(dvb_usb_debug,0x001,args)
-#define deb_xfer(args...)  dprintk(dvb_usb_debug,0x002,args)
-#define deb_pll(args...)   dprintk(dvb_usb_debug,0x004,args)
-#define deb_ts(args...)    dprintk(dvb_usb_debug,0x008,args)
-#define deb_err(args...)   dprintk(dvb_usb_debug,0x010,args)
-#define deb_rc(args...)    dprintk(dvb_usb_debug,0x020,args)
-#define deb_fw(args...)    dprintk(dvb_usb_debug,0x040,args)
-#define deb_mem(args...)   dprintk(dvb_usb_debug,0x080,args)
-#define deb_uxfer(args...) dprintk(dvb_usb_debug,0x100,args)
-
-/* commonly used  methods */
-extern int dvb_usb_download_firmware(struct usb_device *, struct dvb_usb_device_properties *);
-
-extern int dvb_usb_device_power_ctrl(struct dvb_usb_device *d, int onoff);
-
-extern int usb_urb_init(struct usb_data_stream *stream, struct usb_data_stream_properties *props);
-extern int usb_urb_exit(struct usb_data_stream *stream);
-extern int usb_urb_submit(struct usb_data_stream *stream);
-extern int usb_urb_kill(struct usb_data_stream *stream);
-
-extern int dvb_usb_adapter_stream_init(struct dvb_usb_adapter *adap);
-extern int dvb_usb_adapter_stream_exit(struct dvb_usb_adapter *adap);
-
-extern int dvb_usb_i2c_init(struct dvb_usb_device *);
-extern int dvb_usb_i2c_exit(struct dvb_usb_device *);
-
-extern int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap,
-				    short *adapter_nums);
-extern int dvb_usb_adapter_dvb_exit(struct dvb_usb_adapter *adap);
-extern int dvb_usb_adapter_frontend_init(struct dvb_usb_adapter *adap);
-extern int dvb_usb_adapter_frontend_exit(struct dvb_usb_adapter *adap);
-
-extern int dvb_usb_remote_init(struct dvb_usb_device *);
-extern int dvb_usb_remote_exit(struct dvb_usb_device *);
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c b/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c
deleted file mode 100644
index ddf282f..0000000
--- a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/* dvb-usb-dvb.c is part of the DVB USB library.
- *
- * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
- * see dvb-usb-init.c for copyright information.
- *
- * This file contains functions for initializing and handling the
- * linux-dvb API.
- */
-#include "dvb-usb-common.h"
-
-/* does the complete input transfer handling */
-static int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, int onoff)
-{
-	struct dvb_usb_adapter *adap = dvbdmxfeed->demux->priv;
-	int newfeedcount, ret;
-
-	if (adap == NULL)
-		return -ENODEV;
-
-	if ((adap->active_fe < 0) ||
-	    (adap->active_fe >= adap->num_frontends_initialized)) {
-		return -EINVAL;
-	}
-
-	newfeedcount = adap->feedcount + (onoff ? 1 : -1);
-
-	/* stop feed before setting a new pid if there will be no pid anymore */
-	if (newfeedcount == 0) {
-		deb_ts("stop feeding\n");
-		usb_urb_kill(&adap->fe_adap[adap->active_fe].stream);
-
-		if (adap->props.fe[adap->active_fe].streaming_ctrl != NULL) {
-			ret = adap->props.fe[adap->active_fe].streaming_ctrl(adap, 0);
-			if (ret < 0) {
-				err("error while stopping stream.");
-				return ret;
-			}
-		}
-	}
-
-	adap->feedcount = newfeedcount;
-
-	/* activate the pid on the device specific pid_filter */
-	deb_ts("setting pid (%s): %5d %04x at index %d '%s'\n",
-		adap->fe_adap[adap->active_fe].pid_filtering ?
-		"yes" : "no", dvbdmxfeed->pid, dvbdmxfeed->pid,
-		dvbdmxfeed->index, onoff ? "on" : "off");
-	if (adap->props.fe[adap->active_fe].caps & DVB_USB_ADAP_HAS_PID_FILTER &&
-		adap->fe_adap[adap->active_fe].pid_filtering &&
-		adap->props.fe[adap->active_fe].pid_filter != NULL)
-		adap->props.fe[adap->active_fe].pid_filter(adap, dvbdmxfeed->index, dvbdmxfeed->pid, onoff);
-
-	/* start the feed if this was the first feed and there is still a feed
-	 * for reception.
-	 */
-	if (adap->feedcount == onoff && adap->feedcount > 0) {
-		deb_ts("submitting all URBs\n");
-		usb_urb_submit(&adap->fe_adap[adap->active_fe].stream);
-
-		deb_ts("controlling pid parser\n");
-		if (adap->props.fe[adap->active_fe].caps & DVB_USB_ADAP_HAS_PID_FILTER &&
-			adap->props.fe[adap->active_fe].caps &
-			DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF &&
-			adap->props.fe[adap->active_fe].pid_filter_ctrl != NULL) {
-			ret = adap->props.fe[adap->active_fe].pid_filter_ctrl(adap,
-				adap->fe_adap[adap->active_fe].pid_filtering);
-			if (ret < 0) {
-				err("could not handle pid_parser");
-				return ret;
-			}
-		}
-		deb_ts("start feeding\n");
-		if (adap->props.fe[adap->active_fe].streaming_ctrl != NULL) {
-			ret = adap->props.fe[adap->active_fe].streaming_ctrl(adap, 1);
-			if (ret < 0) {
-				err("error while enabling fifo.");
-				return ret;
-			}
-		}
-
-	}
-	return 0;
-}
-
-static int dvb_usb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	deb_ts("start pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid,dvbdmxfeed->type);
-	return dvb_usb_ctrl_feed(dvbdmxfeed,1);
-}
-
-static int dvb_usb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	deb_ts("stop pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid, dvbdmxfeed->type);
-	return dvb_usb_ctrl_feed(dvbdmxfeed,0);
-}
-
-int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap, short *adapter_nums)
-{
-	int i;
-	int ret = dvb_register_adapter(&adap->dvb_adap, adap->dev->desc->name,
-				       adap->dev->owner, &adap->dev->udev->dev,
-				       adapter_nums);
-
-	if (ret < 0) {
-		deb_info("dvb_register_adapter failed: error %d", ret);
-		goto err;
-	}
-	adap->dvb_adap.priv = adap;
-	adap->dvb_adap.fe_ioctl_override = adap->props.fe_ioctl_override;
-
-	if (adap->dev->props.read_mac_address) {
-		if (adap->dev->props.read_mac_address(adap->dev,adap->dvb_adap.proposed_mac) == 0)
-			info("MAC address: %pM",adap->dvb_adap.proposed_mac);
-		else
-			err("MAC address reading failed.");
-	}
-
-
-	adap->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING;
-	adap->demux.priv             = adap;
-
-	adap->demux.filternum        = 0;
-	for (i = 0; i < adap->props.num_frontends; i++) {
-		if (adap->demux.filternum < adap->fe_adap[i].max_feed_count)
-			adap->demux.filternum = adap->fe_adap[i].max_feed_count;
-	}
-	adap->demux.feednum          = adap->demux.filternum;
-	adap->demux.start_feed       = dvb_usb_start_feed;
-	adap->demux.stop_feed        = dvb_usb_stop_feed;
-	adap->demux.write_to_decoder = NULL;
-	if ((ret = dvb_dmx_init(&adap->demux)) < 0) {
-		err("dvb_dmx_init failed: error %d",ret);
-		goto err_dmx;
-	}
-
-	adap->dmxdev.filternum       = adap->demux.filternum;
-	adap->dmxdev.demux           = &adap->demux.dmx;
-	adap->dmxdev.capabilities    = 0;
-	if ((ret = dvb_dmxdev_init(&adap->dmxdev, &adap->dvb_adap)) < 0) {
-		err("dvb_dmxdev_init failed: error %d",ret);
-		goto err_dmx_dev;
-	}
-
-	if ((ret = dvb_net_init(&adap->dvb_adap, &adap->dvb_net,
-						&adap->demux.dmx)) < 0) {
-		err("dvb_net_init failed: error %d",ret);
-		goto err_net_init;
-	}
-
-	adap->state |= DVB_USB_ADAP_STATE_DVB;
-	return 0;
-
-err_net_init:
-	dvb_dmxdev_release(&adap->dmxdev);
-err_dmx_dev:
-	dvb_dmx_release(&adap->demux);
-err_dmx:
-	dvb_unregister_adapter(&adap->dvb_adap);
-err:
-	return ret;
-}
-
-int dvb_usb_adapter_dvb_exit(struct dvb_usb_adapter *adap)
-{
-	if (adap->state & DVB_USB_ADAP_STATE_DVB) {
-		deb_info("unregistering DVB part\n");
-		dvb_net_release(&adap->dvb_net);
-		adap->demux.dmx.close(&adap->demux.dmx);
-		dvb_dmxdev_release(&adap->dmxdev);
-		dvb_dmx_release(&adap->demux);
-		dvb_unregister_adapter(&adap->dvb_adap);
-		adap->state &= ~DVB_USB_ADAP_STATE_DVB;
-	}
-	return 0;
-}
-
-static int dvb_usb_set_active_fe(struct dvb_frontend *fe, int onoff)
-{
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-
-	int ret = (adap->props.frontend_ctrl) ?
-		adap->props.frontend_ctrl(fe, onoff) : 0;
-
-	if (ret < 0) {
-		err("frontend_ctrl request failed");
-		return ret;
-	}
-	if (onoff)
-		adap->active_fe = fe->id;
-
-	return 0;
-}
-
-static int dvb_usb_fe_wakeup(struct dvb_frontend *fe)
-{
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-
-	dvb_usb_device_power_ctrl(adap->dev, 1);
-
-	dvb_usb_set_active_fe(fe, 1);
-
-	if (adap->fe_adap[fe->id].fe_init)
-		adap->fe_adap[fe->id].fe_init(fe);
-
-	return 0;
-}
-
-static int dvb_usb_fe_sleep(struct dvb_frontend *fe)
-{
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-
-	if (adap->fe_adap[fe->id].fe_sleep)
-		adap->fe_adap[fe->id].fe_sleep(fe);
-
-	dvb_usb_set_active_fe(fe, 0);
-
-	return dvb_usb_device_power_ctrl(adap->dev, 0);
-}
-
-int dvb_usb_adapter_frontend_init(struct dvb_usb_adapter *adap)
-{
-	int ret, i;
-
-	/* register all given adapter frontends */
-	for (i = 0; i < adap->props.num_frontends; i++) {
-
-		if (adap->props.fe[i].frontend_attach == NULL) {
-			err("strange: '%s' #%d,%d "
-			    "doesn't want to attach a frontend.",
-			    adap->dev->desc->name, adap->id, i);
-
-			return 0;
-		}
-
-		ret = adap->props.fe[i].frontend_attach(adap);
-		if (ret || adap->fe_adap[i].fe == NULL) {
-			/* only print error when there is no FE at all */
-			if (i == 0)
-				err("no frontend was attached by '%s'",
-					adap->dev->desc->name);
-
-			return 0;
-		}
-
-		adap->fe_adap[i].fe->id = i;
-
-		/* re-assign sleep and wakeup functions */
-		adap->fe_adap[i].fe_init = adap->fe_adap[i].fe->ops.init;
-		adap->fe_adap[i].fe->ops.init  = dvb_usb_fe_wakeup;
-		adap->fe_adap[i].fe_sleep = adap->fe_adap[i].fe->ops.sleep;
-		adap->fe_adap[i].fe->ops.sleep = dvb_usb_fe_sleep;
-
-		if (dvb_register_frontend(&adap->dvb_adap, adap->fe_adap[i].fe)) {
-			err("Frontend %d registration failed.", i);
-			dvb_frontend_detach(adap->fe_adap[i].fe);
-			adap->fe_adap[i].fe = NULL;
-			/* In error case, do not try register more FEs,
-			 * still leaving already registered FEs alive. */
-			if (i == 0)
-				return -ENODEV;
-			else
-				return 0;
-		}
-
-		/* only attach the tuner if the demod is there */
-		if (adap->props.fe[i].tuner_attach != NULL)
-			adap->props.fe[i].tuner_attach(adap);
-
-		adap->num_frontends_initialized++;
-	}
-
-	return 0;
-}
-
-int dvb_usb_adapter_frontend_exit(struct dvb_usb_adapter *adap)
-{
-	int i = adap->num_frontends_initialized - 1;
-
-	/* unregister all given adapter frontends */
-	for (; i >= 0; i--) {
-		if (adap->fe_adap[i].fe != NULL) {
-			dvb_unregister_frontend(adap->fe_adap[i].fe);
-			dvb_frontend_detach(adap->fe_adap[i].fe);
-		}
-	}
-	adap->num_frontends_initialized = 0;
-
-	return 0;
-}
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
deleted file mode 100644
index 733a7ff..0000000
--- a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/* dvb-usb-firmware.c is part of the DVB USB library.
- *
- * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
- * see dvb-usb-init.c for copyright information.
- *
- * This file contains functions for downloading the firmware to Cypress FX 1 and 2 based devices.
- *
- * FIXME: This part does actually not belong to dvb-usb, but to the usb-subsystem.
- */
-#include "dvb-usb-common.h"
-
-#include <linux/usb.h>
-
-struct usb_cypress_controller {
-	int id;
-	const char *name;       /* name of the usb controller */
-	u16 cpu_cs_register;    /* needs to be restarted, when the firmware has been downloaded. */
-};
-
-static struct usb_cypress_controller cypress[] = {
-	{ .id = DEVICE_SPECIFIC, .name = "Device specific", .cpu_cs_register = 0 },
-	{ .id = CYPRESS_AN2135,  .name = "Cypress AN2135",  .cpu_cs_register = 0x7f92 },
-	{ .id = CYPRESS_AN2235,  .name = "Cypress AN2235",  .cpu_cs_register = 0x7f92 },
-	{ .id = CYPRESS_FX2,     .name = "Cypress FX2",     .cpu_cs_register = 0xe600 },
-};
-
-/*
- * load a firmware packet to the device
- */
-static int usb_cypress_writemem(struct usb_device *udev,u16 addr,u8 *data, u8 len)
-{
-	return usb_control_msg(udev, usb_sndctrlpipe(udev,0),
-			0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len, 5000);
-}
-
-int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw, int type)
-{
-	struct hexline hx;
-	u8 reset;
-	int ret,pos=0;
-
-	/* stop the CPU */
-	reset = 1;
-	if ((ret = usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1)) != 1)
-		err("could not stop the USB controller CPU.");
-
-	while ((ret = dvb_usb_get_hexline(fw,&hx,&pos)) > 0) {
-		deb_fw("writing to address 0x%04x (buffer: 0x%02x %02x)\n",hx.addr,hx.len,hx.chk);
-		ret = usb_cypress_writemem(udev,hx.addr,hx.data,hx.len);
-
-		if (ret != hx.len) {
-			err("error while transferring firmware "
-				"(transferred size: %d, block size: %d)",
-				ret,hx.len);
-			ret = -EINVAL;
-			break;
-		}
-	}
-	if (ret < 0) {
-		err("firmware download failed at %d with %d",pos,ret);
-		return ret;
-	}
-
-	if (ret == 0) {
-		/* restart the CPU */
-		reset = 0;
-		if (ret || usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1) != 1) {
-			err("could not restart the USB controller CPU.");
-			ret = -EINVAL;
-		}
-	} else
-		ret = -EIO;
-
-	return ret;
-}
-EXPORT_SYMBOL(usb_cypress_load_firmware);
-
-int dvb_usb_download_firmware(struct usb_device *udev, struct dvb_usb_device_properties *props)
-{
-	int ret;
-	const struct firmware *fw = NULL;
-
-	if ((ret = request_firmware(&fw, props->firmware, &udev->dev)) != 0) {
-		err("did not find the firmware file. (%s) "
-			"Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)",
-			props->firmware,ret);
-		return ret;
-	}
-
-	info("downloading firmware from file '%s'",props->firmware);
-
-	switch (props->usb_ctrl) {
-		case CYPRESS_AN2135:
-		case CYPRESS_AN2235:
-		case CYPRESS_FX2:
-			ret = usb_cypress_load_firmware(udev, fw, props->usb_ctrl);
-			break;
-		case DEVICE_SPECIFIC:
-			if (props->download_firmware)
-				ret = props->download_firmware(udev,fw);
-			else {
-				err("BUG: driver didn't specified a download_firmware-callback, although it claims to have a DEVICE_SPECIFIC one.");
-				ret = -EINVAL;
-			}
-			break;
-		default:
-			ret = -EINVAL;
-			break;
-	}
-
-	release_firmware(fw);
-	return ret;
-}
-
-int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx,
-			       int *pos)
-{
-	u8 *b = (u8 *) &fw->data[*pos];
-	int data_offs = 4;
-	if (*pos >= fw->size)
-		return 0;
-
-	memset(hx,0,sizeof(struct hexline));
-
-	hx->len  = b[0];
-
-	if ((*pos + hx->len + 4) >= fw->size)
-		return -EINVAL;
-
-	hx->addr = b[1] | (b[2] << 8);
-	hx->type = b[3];
-
-	if (hx->type == 0x04) {
-		/* b[4] and b[5] are the Extended linear address record data field */
-		hx->addr |= (b[4] << 24) | (b[5] << 16);
-/*		hx->len -= 2;
-		data_offs += 2; */
-	}
-	memcpy(hx->data,&b[data_offs],hx->len);
-	hx->chk = b[hx->len + data_offs];
-
-	*pos += hx->len + 5;
-
-	return *pos;
-}
-EXPORT_SYMBOL(dvb_usb_get_hexline);
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c b/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c
deleted file mode 100644
index 88e4a62..0000000
--- a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* dvb-usb-i2c.c is part of the DVB USB library.
- *
- * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
- * see dvb-usb-init.c for copyright information.
- *
- * This file contains functions for (de-)initializing an I2C adapter.
- */
-#include "dvb-usb-common.h"
-
-int dvb_usb_i2c_init(struct dvb_usb_device *d)
-{
-	int ret = 0;
-
-	if (!(d->props.caps & DVB_USB_IS_AN_I2C_ADAPTER))
-		return 0;
-
-	if (d->props.i2c_algo == NULL) {
-		err("no i2c algorithm specified");
-		return -EINVAL;
-	}
-
-	strlcpy(d->i2c_adap.name, d->desc->name, sizeof(d->i2c_adap.name));
-	d->i2c_adap.algo      = d->props.i2c_algo;
-	d->i2c_adap.algo_data = NULL;
-	d->i2c_adap.dev.parent = &d->udev->dev;
-
-	i2c_set_adapdata(&d->i2c_adap, d);
-
-	if ((ret = i2c_add_adapter(&d->i2c_adap)) < 0)
-		err("could not add i2c adapter");
-
-	d->state |= DVB_USB_STATE_I2C;
-
-	return ret;
-}
-
-int dvb_usb_i2c_exit(struct dvb_usb_device *d)
-{
-	if (d->state & DVB_USB_STATE_I2C)
-		i2c_del_adapter(&d->i2c_adap);
-	d->state &= ~DVB_USB_STATE_I2C;
-	return 0;
-}
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
deleted file mode 100644
index 26c4481..0000000
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ /dev/null
@@ -1,361 +0,0 @@
-/* dvb-usb-ids.h is part of the DVB USB library.
- *
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) see
- * dvb-usb-init.c for copyright information.
- *
- * a header file containing define's for the USB device supported by the
- * various drivers.
- */
-#ifndef _DVB_USB_IDS_H_
-#define _DVB_USB_IDS_H_
-
-/* Vendor IDs */
-#define USB_VID_ADSTECH				0x06e1
-#define USB_VID_AFATECH				0x15a4
-#define USB_VID_ALCOR_MICRO			0x058f
-#define USB_VID_ALINK				0x05e3
-#define USB_VID_AMT				0x1c73
-#define USB_VID_ANCHOR				0x0547
-#define USB_VID_ANSONIC				0x10b9
-#define USB_VID_ANUBIS_ELECTRONIC		0x10fd
-#define USB_VID_ASUS				0x0b05
-#define USB_VID_AVERMEDIA			0x07ca
-#define USB_VID_COMPRO				0x185b
-#define USB_VID_COMPRO_UNK			0x145f
-#define USB_VID_CONEXANT			0x0572
-#define USB_VID_CYPRESS				0x04b4
-#define USB_VID_DIBCOM				0x10b8
-#define USB_VID_DPOSH				0x1498
-#define USB_VID_DVICO				0x0fe9
-#define USB_VID_E3C				0x18b4
-#define USB_VID_ELGATO				0x0fd9
-#define USB_VID_EMPIA				0xeb1a
-#define USB_VID_GENPIX				0x09c0
-#define USB_VID_GRANDTEC			0x5032
-#define USB_VID_GTEK				0x1f4d
-#define USB_VID_HANFTEK				0x15f4
-#define USB_VID_HAUPPAUGE			0x2040
-#define USB_VID_HYPER_PALTEK			0x1025
-#define USB_VID_INTEL				0x8086
-#define USB_VID_ITETECH				0x048d
-#define USB_VID_KWORLD				0xeb2a
-#define USB_VID_KWORLD_2			0x1b80
-#define USB_VID_KYE				0x0458
-#define USB_VID_LEADTEK				0x0413
-#define USB_VID_LITEON				0x04ca
-#define USB_VID_MEDION				0x1660
-#define USB_VID_MIGLIA				0x18f3
-#define USB_VID_MSI				0x0db0
-#define USB_VID_MSI_2				0x1462
-#define USB_VID_OPERA1				0x695c
-#define USB_VID_PINNACLE			0x2304
-#define USB_VID_PCTV				0x2013
-#define USB_VID_PIXELVIEW			0x1554
-#define USB_VID_REALTEK				0x0bda
-#define USB_VID_TECHNOTREND			0x0b48
-#define USB_VID_TERRATEC			0x0ccd
-#define USB_VID_TELESTAR			0x10b9
-#define USB_VID_VISIONPLUS			0x13d3
-#define USB_VID_SONY				0x1415
-#define USB_VID_TWINHAN				0x1822
-#define USB_VID_ULTIMA_ELECTRONIC		0x05d8
-#define USB_VID_UNIWILL				0x1584
-#define USB_VID_WIDEVIEW			0x14aa
-#define USB_VID_GIGABYTE			0x1044
-#define USB_VID_YUAN				0x1164
-#define USB_VID_XTENSIONS			0x1ae7
-#define USB_VID_HUMAX_COEX			0x10b9
-#define USB_VID_774				0x7a69
-#define USB_VID_EVOLUTEPC			0x1e59
-#define USB_VID_AZUREWAVE			0x13d3
-#define USB_VID_TECHNISAT			0x14f7
-
-/* Product IDs */
-#define USB_PID_ADSTECH_USB2_COLD			0xa333
-#define USB_PID_ADSTECH_USB2_WARM			0xa334
-#define USB_PID_AFATECH_AF9005				0x9020
-#define USB_PID_AFATECH_AF9015_9015			0x9015
-#define USB_PID_AFATECH_AF9015_9016			0x9016
-#define USB_PID_AFATECH_AF9035_1000			0x1000
-#define USB_PID_AFATECH_AF9035_1001			0x1001
-#define USB_PID_AFATECH_AF9035_1002			0x1002
-#define USB_PID_AFATECH_AF9035_1003			0x1003
-#define USB_PID_AFATECH_AF9035_9035			0x9035
-#define USB_PID_TREKSTOR_DVBT				0x901b
-#define USB_VID_ALINK_DTU				0xf170
-#define USB_PID_ANSONIC_DVBT_USB			0x6000
-#define USB_PID_ANYSEE					0x861f
-#define USB_PID_AZUREWAVE_AD_TU700			0x3237
-#define USB_PID_AZUREWAVE_6007				0x0ccd
-#define USB_PID_AVERMEDIA_DVBT_USB_COLD			0x0001
-#define USB_PID_AVERMEDIA_DVBT_USB_WARM			0x0002
-#define USB_PID_AVERMEDIA_DVBT_USB2_COLD		0xa800
-#define USB_PID_AVERMEDIA_DVBT_USB2_WARM		0xa801
-#define USB_PID_COMPRO_DVBU2000_COLD			0xd000
-#define USB_PID_COMPRO_DVBU2000_WARM			0xd001
-#define USB_PID_COMPRO_DVBU2000_UNK_COLD		0x010c
-#define USB_PID_COMPRO_DVBU2000_UNK_WARM		0x010d
-#define USB_PID_COMPRO_VIDEOMATE_U500			0x1e78
-#define USB_PID_COMPRO_VIDEOMATE_U500_PC		0x1e80
-#define USB_PID_CONCEPTRONIC_CTVDIGRCU			0xe397
-#define USB_PID_CONEXANT_D680_DMB			0x86d6
-#define USB_PID_CREATIX_CTX1921				0x1921
-#define USB_PID_DELOCK_USB2_DVBT			0xb803
-#define USB_PID_DIBCOM_HOOK_DEFAULT			0x0064
-#define USB_PID_DIBCOM_HOOK_DEFAULT_REENUM		0x0065
-#define USB_PID_DIBCOM_MOD3000_COLD			0x0bb8
-#define USB_PID_DIBCOM_MOD3000_WARM			0x0bb9
-#define USB_PID_DIBCOM_MOD3001_COLD			0x0bc6
-#define USB_PID_DIBCOM_MOD3001_WARM			0x0bc7
-#define USB_PID_DIBCOM_STK7700P				0x1e14
-#define USB_PID_DIBCOM_STK7700P_PC			0x1e78
-#define USB_PID_DIBCOM_STK7700D				0x1ef0
-#define USB_PID_DIBCOM_STK7700_U7000			0x7001
-#define USB_PID_DIBCOM_STK7070P				0x1ebc
-#define USB_PID_DIBCOM_STK7070PD			0x1ebe
-#define USB_PID_DIBCOM_STK807XP				0x1f90
-#define USB_PID_DIBCOM_STK807XPVR			0x1f98
-#define USB_PID_DIBCOM_STK8096GP                        0x1fa0
-#define USB_PID_DIBCOM_NIM8096MD                        0x1fa8
-#define USB_PID_DIBCOM_TFE8096P				0x1f9C
-#define USB_PID_DIBCOM_ANCHOR_2135_COLD			0x2131
-#define USB_PID_DIBCOM_STK7770P				0x1e80
-#define USB_PID_DIBCOM_NIM7090				0x1bb2
-#define USB_PID_DIBCOM_TFE7090PVR			0x1bb4
-#define USB_PID_DIBCOM_TFE7090E				0x1bb7
-#define USB_PID_DIBCOM_TFE7790E				0x1e6e
-#define USB_PID_DIBCOM_NIM9090M				0x2383
-#define USB_PID_DIBCOM_NIM9090MD			0x2384
-#define USB_PID_DPOSH_M9206_COLD			0x9206
-#define USB_PID_DPOSH_M9206_WARM			0xa090
-#define USB_PID_E3C_EC168				0x1689
-#define USB_PID_E3C_EC168_2				0xfffa
-#define USB_PID_E3C_EC168_3				0xfffb
-#define USB_PID_E3C_EC168_4				0x1001
-#define USB_PID_E3C_EC168_5				0x1002
-#define USB_PID_FREECOM_DVBT				0x0160
-#define USB_PID_FREECOM_DVBT_2				0x0161
-#define USB_PID_UNIWILL_STK7700P			0x6003
-#define USB_PID_GENIUS_TVGO_DVB_T03			0x4012
-#define USB_PID_GRANDTEC_DVBT_USB_COLD			0x0fa0
-#define USB_PID_GRANDTEC_DVBT_USB_WARM			0x0fa1
-#define USB_PID_INTEL_CE9500				0x9500
-#define USB_PID_ITETECH_IT9135				0x9135
-#define USB_PID_ITETECH_IT9135_9005			0x9005
-#define USB_PID_ITETECH_IT9135_9006			0x9006
-#define USB_PID_KWORLD_399U				0xe399
-#define USB_PID_KWORLD_399U_2				0xe400
-#define USB_PID_KWORLD_395U				0xe396
-#define USB_PID_KWORLD_395U_2				0xe39b
-#define USB_PID_KWORLD_395U_3				0xe395
-#define USB_PID_KWORLD_395U_4				0xe39a
-#define USB_PID_KWORLD_MC810				0xc810
-#define USB_PID_KWORLD_PC160_2T				0xc160
-#define USB_PID_KWORLD_PC160_T				0xc161
-#define USB_PID_KWORLD_UB383_T				0xe383
-#define USB_PID_KWORLD_UB499_2T_T09			0xe409
-#define USB_PID_KWORLD_VSTREAM_COLD			0x17de
-#define USB_PID_KWORLD_VSTREAM_WARM			0x17df
-#define USB_PID_TERRATEC_CINERGY_T_USB_XE		0x0055
-#define USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2		0x0069
-#define USB_PID_TERRATEC_CINERGY_T_STICK		0x0093
-#define USB_PID_TERRATEC_CINERGY_T_STICK_RC		0x0097
-#define USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC	0x0099
-#define USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1	0x00a9
-#define USB_PID_TWINHAN_VP7041_COLD			0x3201
-#define USB_PID_TWINHAN_VP7041_WARM			0x3202
-#define USB_PID_TWINHAN_VP7020_COLD			0x3203
-#define USB_PID_TWINHAN_VP7020_WARM			0x3204
-#define USB_PID_TWINHAN_VP7045_COLD			0x3205
-#define USB_PID_TWINHAN_VP7045_WARM			0x3206
-#define USB_PID_TWINHAN_VP7021_COLD			0x3207
-#define USB_PID_TWINHAN_VP7021_WARM			0x3208
-#define USB_PID_TINYTWIN				0x3226
-#define USB_PID_TINYTWIN_2				0xe402
-#define USB_PID_TINYTWIN_3				0x9016
-#define USB_PID_DNTV_TINYUSB2_COLD			0x3223
-#define USB_PID_DNTV_TINYUSB2_WARM			0x3224
-#define USB_PID_ULTIMA_TVBOX_COLD			0x8105
-#define USB_PID_ULTIMA_TVBOX_WARM			0x8106
-#define USB_PID_ULTIMA_TVBOX_AN2235_COLD		0x8107
-#define USB_PID_ULTIMA_TVBOX_AN2235_WARM		0x8108
-#define USB_PID_ULTIMA_TVBOX_ANCHOR_COLD		0x2235
-#define USB_PID_ULTIMA_TVBOX_USB2_COLD			0x8109
-#define USB_PID_ULTIMA_TVBOX_USB2_WARM			0x810a
-#define USB_PID_ARTEC_T14_COLD				0x810b
-#define USB_PID_ARTEC_T14_WARM				0x810c
-#define USB_PID_ARTEC_T14BR				0x810f
-#define USB_PID_ULTIMA_TVBOX_USB2_FX_COLD		0x8613
-#define USB_PID_ULTIMA_TVBOX_USB2_FX_WARM		0x1002
-#define USB_PID_UNK_HYPER_PALTEK_COLD			0x005e
-#define USB_PID_UNK_HYPER_PALTEK_WARM			0x005f
-#define USB_PID_HANFTEK_UMT_010_COLD			0x0001
-#define USB_PID_HANFTEK_UMT_010_WARM			0x0015
-#define USB_PID_DTT200U_COLD				0x0201
-#define USB_PID_DTT200U_WARM				0x0301
-#define USB_PID_WT220U_ZAP250_COLD			0x0220
-#define USB_PID_WT220U_COLD				0x0222
-#define USB_PID_WT220U_WARM				0x0221
-#define USB_PID_WT220U_FC_COLD				0x0225
-#define USB_PID_WT220U_FC_WARM				0x0226
-#define USB_PID_WT220U_ZL0353_COLD			0x022a
-#define USB_PID_WT220U_ZL0353_WARM			0x022b
-#define USB_PID_WINTV_NOVA_T_USB2_COLD			0x9300
-#define USB_PID_WINTV_NOVA_T_USB2_WARM			0x9301
-#define USB_PID_HAUPPAUGE_NOVA_T_500			0x9941
-#define USB_PID_HAUPPAUGE_NOVA_T_500_2			0x9950
-#define USB_PID_HAUPPAUGE_NOVA_T_500_3			0x8400
-#define USB_PID_HAUPPAUGE_NOVA_T_STICK			0x7050
-#define USB_PID_HAUPPAUGE_NOVA_T_STICK_2		0x7060
-#define USB_PID_HAUPPAUGE_NOVA_T_STICK_3		0x7070
-#define USB_PID_HAUPPAUGE_MYTV_T			0x7080
-#define USB_PID_HAUPPAUGE_NOVA_TD_STICK			0x9580
-#define USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009		0x5200
-#define USB_PID_HAUPPAUGE_TIGER_ATSC			0xb200
-#define USB_PID_HAUPPAUGE_TIGER_ATSC_B210		0xb210
-#define USB_PID_AVERMEDIA_EXPRESS			0xb568
-#define USB_PID_AVERMEDIA_VOLAR				0xa807
-#define USB_PID_AVERMEDIA_VOLAR_2			0xb808
-#define USB_PID_AVERMEDIA_VOLAR_A868R			0xa868
-#define USB_PID_AVERMEDIA_MCE_USB_M038			0x1228
-#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R	0x0039
-#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_ATSC	0x1039
-#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_DVBT	0x2039
-#define USB_PID_AVERMEDIA_VOLAR_X			0xa815
-#define USB_PID_AVERMEDIA_VOLAR_X_2			0x8150
-#define USB_PID_AVERMEDIA_A309				0xa309
-#define USB_PID_AVERMEDIA_A310				0xa310
-#define USB_PID_AVERMEDIA_A850				0x850a
-#define USB_PID_AVERMEDIA_A850T				0x850b
-#define USB_PID_AVERMEDIA_A805				0xa805
-#define USB_PID_AVERMEDIA_A815M				0x815a
-#define USB_PID_AVERMEDIA_A835				0xa835
-#define USB_PID_AVERMEDIA_B835				0xb835
-#define USB_PID_AVERMEDIA_1867				0x1867
-#define USB_PID_AVERMEDIA_A867				0xa867
-#define USB_PID_AVERMEDIA_TWINSTAR			0x0825
-#define USB_PID_TECHNOTREND_CONNECT_S2400               0x3006
-#define USB_PID_TECHNOTREND_CONNECT_CT3650		0x300d
-#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY	0x005a
-#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2	0x0081
-#define USB_PID_TERRATEC_CINERGY_HT_USB_XE		0x0058
-#define USB_PID_TERRATEC_CINERGY_HT_EXPRESS		0x0060
-#define USB_PID_TERRATEC_CINERGY_T_EXPRESS		0x0062
-#define USB_PID_TERRATEC_CINERGY_T_XXS			0x0078
-#define USB_PID_TERRATEC_CINERGY_T_XXS_2		0x00ab
-#define USB_PID_TERRATEC_H7				0x10b4
-#define USB_PID_TERRATEC_H7_2				0x10a3
-#define USB_PID_TERRATEC_T3				0x10a0
-#define USB_PID_TERRATEC_T5				0x10a1
-#define USB_PID_NOXON_DAB_STICK				0x00b3
-#define USB_PID_PINNACLE_EXPRESSCARD_320CX		0x022e
-#define USB_PID_PINNACLE_PCTV2000E			0x022c
-#define USB_PID_PINNACLE_PCTV_DVB_T_FLASH		0x0228
-#define USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T	0x0229
-#define USB_PID_PINNACLE_PCTV71E			0x022b
-#define USB_PID_PINNACLE_PCTV72E			0x0236
-#define USB_PID_PINNACLE_PCTV73E			0x0237
-#define USB_PID_PINNACLE_PCTV310E			0x3211
-#define USB_PID_PINNACLE_PCTV801E			0x023a
-#define USB_PID_PINNACLE_PCTV801E_SE			0x023b
-#define USB_PID_PINNACLE_PCTV340E			0x023d
-#define USB_PID_PINNACLE_PCTV340E_SE			0x023e
-#define USB_PID_PINNACLE_PCTV73A			0x0243
-#define USB_PID_PINNACLE_PCTV73ESE			0x0245
-#define USB_PID_PINNACLE_PCTV74E			0x0246
-#define USB_PID_PINNACLE_PCTV282E			0x0248
-#define USB_PID_PIXELVIEW_SBTVD				0x5010
-#define USB_PID_PCTV_200E				0x020e
-#define USB_PID_PCTV_400E				0x020f
-#define USB_PID_PCTV_450E				0x0222
-#define USB_PID_PCTV_452E				0x021f
-#define USB_PID_REALTEK_RTL2831U			0x2831
-#define USB_PID_REALTEK_RTL2832U			0x2832
-#define USB_PID_TECHNOTREND_CONNECT_S2_3600		0x3007
-#define USB_PID_TECHNOTREND_CONNECT_S2_3650_CI		0x300a
-#define USB_PID_NEBULA_DIGITV				0x0201
-#define USB_PID_DVICO_BLUEBIRD_LGDT			0xd820
-#define USB_PID_DVICO_BLUEBIRD_LG064F_COLD		0xd500
-#define USB_PID_DVICO_BLUEBIRD_LG064F_WARM		0xd501
-#define USB_PID_DVICO_BLUEBIRD_LGZ201_COLD		0xdb00
-#define USB_PID_DVICO_BLUEBIRD_LGZ201_WARM		0xdb01
-#define USB_PID_DVICO_BLUEBIRD_TH7579_COLD		0xdb10
-#define USB_PID_DVICO_BLUEBIRD_TH7579_WARM		0xdb11
-#define USB_PID_DVICO_BLUEBIRD_DUAL_1_COLD		0xdb50
-#define USB_PID_DVICO_BLUEBIRD_DUAL_1_WARM		0xdb51
-#define USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD		0xdb58
-#define USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM		0xdb59
-#define USB_PID_DVICO_BLUEBIRD_DUAL_4			0xdb78
-#define USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2		0xdb98
-#define USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2		0xdb70
-#define USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM	0xdb71
-#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD		0xdb54
-#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM		0xdb55
-#define USB_PID_MEDION_MD95700				0x0932
-#define USB_PID_MSI_MEGASKY580				0x5580
-#define USB_PID_MSI_MEGASKY580_55801			0x5581
-#define USB_PID_KYE_DVB_T_COLD				0x701e
-#define USB_PID_KYE_DVB_T_WARM				0x701f
-#define USB_PID_LITEON_DVB_T_COLD			0xf000
-#define USB_PID_LITEON_DVB_T_WARM			0xf001
-#define USB_PID_DIGIVOX_MINI_SL_COLD			0xe360
-#define USB_PID_DIGIVOX_MINI_SL_WARM			0xe361
-#define USB_PID_GRANDTEC_DVBT_USB2_COLD			0x0bc6
-#define USB_PID_GRANDTEC_DVBT_USB2_WARM			0x0bc7
-#define USB_PID_WINFAST_DTV2000DS			0x6a04
-#define USB_PID_WINFAST_DTV_DONGLE_COLD			0x6025
-#define USB_PID_WINFAST_DTV_DONGLE_WARM			0x6026
-#define USB_PID_WINFAST_DTV_DONGLE_STK7700P		0x6f00
-#define USB_PID_WINFAST_DTV_DONGLE_H			0x60f6
-#define USB_PID_WINFAST_DTV_DONGLE_STK7700P_2		0x6f01
-#define USB_PID_WINFAST_DTV_DONGLE_GOLD			0x6029
-#define USB_PID_GENPIX_8PSK_REV_1_COLD			0x0200
-#define USB_PID_GENPIX_8PSK_REV_1_WARM			0x0201
-#define USB_PID_GENPIX_8PSK_REV_2			0x0202
-#define USB_PID_GENPIX_SKYWALKER_1			0x0203
-#define USB_PID_GENPIX_SKYWALKER_CW3K			0x0204
-#define USB_PID_GENPIX_SKYWALKER_2			0x0206
-#define USB_PID_SIGMATEK_DVB_110			0x6610
-#define USB_PID_MSI_DIGI_VOX_MINI_II			0x1513
-#define USB_PID_MSI_DIGIVOX_DUO				0x8801
-#define USB_PID_OPERA1_COLD				0x2830
-#define USB_PID_OPERA1_WARM				0x3829
-#define USB_PID_LIFEVIEW_TV_WALKER_TWIN_COLD		0x0514
-#define USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM		0x0513
-#define USB_PID_GIGABYTE_U7000				0x7001
-#define USB_PID_GIGABYTE_U8000				0x7002
-#define USB_PID_ASUS_U3000				0x171f
-#define USB_PID_ASUS_U3000H				0x1736
-#define USB_PID_ASUS_U3100				0x173f
-#define USB_PID_YUAN_EC372S				0x1edc
-#define USB_PID_YUAN_STK7700PH				0x1f08
-#define USB_PID_YUAN_PD378S				0x2edc
-#define USB_PID_YUAN_MC770				0x0871
-#define USB_PID_YUAN_STK7700D				0x1efc
-#define USB_PID_YUAN_STK7700D_2				0x1e8c
-#define USB_PID_DW2102					0x2102
-#define USB_PID_XTENSIONS_XD_380			0x0381
-#define USB_PID_TELESTAR_STARSTICK_2			0x8000
-#define USB_PID_MSI_DIGI_VOX_MINI_III                   0x8807
-#define USB_PID_SONY_PLAYTV				0x0003
-#define USB_PID_MYGICA_D689				0xd811
-#define USB_PID_ELGATO_EYETV_DIVERSITY			0x0011
-#define USB_PID_ELGATO_EYETV_DTT			0x0021
-#define USB_PID_ELGATO_EYETV_DTT_2			0x003f
-#define USB_PID_ELGATO_EYETV_DTT_Dlx			0x0020
-#define USB_PID_ELGATO_EYETV_SAT			0x002a
-#define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD		0x5000
-#define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM		0x5001
-#define USB_PID_FRIIO_WHITE				0x0001
-#define USB_PID_TVWAY_PLUS				0x0002
-#define USB_PID_SVEON_STV20				0xe39d
-#define USB_PID_SVEON_STV22				0xe401
-#define USB_PID_SVEON_STV22_IT9137			0xe411
-#define USB_PID_AZUREWAVE_AZ6027			0x3275
-#define USB_PID_TERRATEC_DVBS2CI_V1			0x10a4
-#define USB_PID_TERRATEC_DVBS2CI_V2			0x10ac
-#define USB_PID_TECHNISAT_USB2_HDCI_V1			0x0001
-#define USB_PID_TECHNISAT_USB2_HDCI_V2			0x0002
-#define USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2		0x0004
-#define USB_PID_TECHNISAT_USB2_DVB_S2			0x0500
-#endif
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
deleted file mode 100644
index 169196e..0000000
--- a/drivers/media/dvb/dvb-usb/dvb-usb-init.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * DVB USB library - provides a generic interface for a DVB USB device driver.
- *
- * dvb-usb-init.c
- *
- * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "dvb-usb-common.h"
-
-/* debug */
-int dvb_usb_debug;
-module_param_named(debug, dvb_usb_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64,mem=128,uxfer=256  (or-able))." DVB_USB_DEBUG_STATUS);
-
-int dvb_usb_disable_rc_polling;
-module_param_named(disable_rc_polling, dvb_usb_disable_rc_polling, int, 0644);
-MODULE_PARM_DESC(disable_rc_polling, "disable remote control polling (default: 0).");
-
-static int dvb_usb_force_pid_filter_usage;
-module_param_named(force_pid_filter_usage, dvb_usb_force_pid_filter_usage, int, 0444);
-MODULE_PARM_DESC(force_pid_filter_usage, "force all dvb-usb-devices to use a PID filter, if any (default: 0).");
-
-static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
-{
-	struct dvb_usb_adapter *adap;
-	int ret, n, o;
-
-	for (n = 0; n < d->props.num_adapters; n++) {
-		adap = &d->adapter[n];
-		adap->dev = d;
-		adap->id  = n;
-
-		memcpy(&adap->props, &d->props.adapter[n], sizeof(struct dvb_usb_adapter_properties));
-
-	for (o = 0; o < adap->props.num_frontends; o++) {
-		struct dvb_usb_adapter_fe_properties *props = &adap->props.fe[o];
-		/* speed - when running at FULL speed we need a HW PID filter */
-		if (d->udev->speed == USB_SPEED_FULL && !(props->caps & DVB_USB_ADAP_HAS_PID_FILTER)) {
-			err("This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)");
-			return -ENODEV;
-		}
-
-		if ((d->udev->speed == USB_SPEED_FULL && props->caps & DVB_USB_ADAP_HAS_PID_FILTER) ||
-			(props->caps & DVB_USB_ADAP_NEED_PID_FILTERING)) {
-			info("will use the device's hardware PID filter (table count: %d).", props->pid_filter_count);
-			adap->fe_adap[o].pid_filtering  = 1;
-			adap->fe_adap[o].max_feed_count = props->pid_filter_count;
-		} else {
-			info("will pass the complete MPEG2 transport stream to the software demuxer.");
-			adap->fe_adap[o].pid_filtering  = 0;
-			adap->fe_adap[o].max_feed_count = 255;
-		}
-
-		if (!adap->fe_adap[o].pid_filtering &&
-			dvb_usb_force_pid_filter_usage &&
-			props->caps & DVB_USB_ADAP_HAS_PID_FILTER) {
-			info("pid filter enabled by module option.");
-			adap->fe_adap[o].pid_filtering  = 1;
-			adap->fe_adap[o].max_feed_count = props->pid_filter_count;
-		}
-
-		if (props->size_of_priv > 0) {
-			adap->fe_adap[o].priv = kzalloc(props->size_of_priv, GFP_KERNEL);
-			if (adap->fe_adap[o].priv == NULL) {
-				err("no memory for priv for adapter %d fe %d.", n, o);
-				return -ENOMEM;
-			}
-		}
-	}
-
-		if (adap->props.size_of_priv > 0) {
-			adap->priv = kzalloc(adap->props.size_of_priv, GFP_KERNEL);
-			if (adap->priv == NULL) {
-				err("no memory for priv for adapter %d.", n);
-				return -ENOMEM;
-			}
-		}
-
-		if ((ret = dvb_usb_adapter_stream_init(adap)) ||
-			(ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs)) ||
-			(ret = dvb_usb_adapter_frontend_init(adap))) {
-			return ret;
-		}
-
-		/* use exclusive FE lock if there is multiple shared FEs */
-		if (adap->fe_adap[1].fe)
-			adap->dvb_adap.mfe_shared = 1;
-
-		d->num_adapters_initialized++;
-		d->state |= DVB_USB_STATE_DVB;
-	}
-
-	/*
-	 * when reloading the driver w/o replugging the device
-	 * sometimes a timeout occures, this helps
-	 */
-	if (d->props.generic_bulk_ctrl_endpoint != 0) {
-		usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
-		usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
-	}
-
-	return 0;
-}
-
-static int dvb_usb_adapter_exit(struct dvb_usb_device *d)
-{
-	int n;
-
-	for (n = 0; n < d->num_adapters_initialized; n++) {
-		dvb_usb_adapter_frontend_exit(&d->adapter[n]);
-		dvb_usb_adapter_dvb_exit(&d->adapter[n]);
-		dvb_usb_adapter_stream_exit(&d->adapter[n]);
-		kfree(d->adapter[n].priv);
-	}
-	d->num_adapters_initialized = 0;
-	d->state &= ~DVB_USB_STATE_DVB;
-	return 0;
-}
-
-
-/* general initialization functions */
-static int dvb_usb_exit(struct dvb_usb_device *d)
-{
-	deb_info("state before exiting everything: %x\n", d->state);
-	dvb_usb_remote_exit(d);
-	dvb_usb_adapter_exit(d);
-	dvb_usb_i2c_exit(d);
-	deb_info("state should be zero now: %x\n", d->state);
-	d->state = DVB_USB_STATE_INIT;
-	kfree(d->priv);
-	kfree(d);
-	return 0;
-}
-
-static int dvb_usb_init(struct dvb_usb_device *d, short *adapter_nums)
-{
-	int ret = 0;
-
-	mutex_init(&d->usb_mutex);
-	mutex_init(&d->i2c_mutex);
-
-	d->state = DVB_USB_STATE_INIT;
-
-	if (d->props.size_of_priv > 0) {
-		d->priv = kzalloc(d->props.size_of_priv, GFP_KERNEL);
-		if (d->priv == NULL) {
-			err("no memory for priv in 'struct dvb_usb_device'");
-			return -ENOMEM;
-		}
-	}
-
-	/* check the capabilities and set appropriate variables */
-	dvb_usb_device_power_ctrl(d, 1);
-
-	if ((ret = dvb_usb_i2c_init(d)) ||
-		(ret = dvb_usb_adapter_init(d, adapter_nums))) {
-		dvb_usb_exit(d);
-		return ret;
-	}
-
-	if ((ret = dvb_usb_remote_init(d)))
-		err("could not initialize remote control.");
-
-	dvb_usb_device_power_ctrl(d, 0);
-
-	return 0;
-}
-
-/* determine the name and the state of the just found USB device */
-static struct dvb_usb_device_description *dvb_usb_find_device(struct usb_device *udev, struct dvb_usb_device_properties *props, int *cold)
-{
-	int i, j;
-	struct dvb_usb_device_description *desc = NULL;
-
-	*cold = -1;
-
-	for (i = 0; i < props->num_device_descs; i++) {
-
-		for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].cold_ids[j] != NULL; j++) {
-			deb_info("check for cold %x %x\n", props->devices[i].cold_ids[j]->idVendor, props->devices[i].cold_ids[j]->idProduct);
-			if (props->devices[i].cold_ids[j]->idVendor  == le16_to_cpu(udev->descriptor.idVendor) &&
-				props->devices[i].cold_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) {
-				*cold = 1;
-				desc = &props->devices[i];
-				break;
-			}
-		}
-
-		if (desc != NULL)
-			break;
-
-		for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].warm_ids[j] != NULL; j++) {
-			deb_info("check for warm %x %x\n", props->devices[i].warm_ids[j]->idVendor, props->devices[i].warm_ids[j]->idProduct);
-			if (props->devices[i].warm_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) &&
-				props->devices[i].warm_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) {
-				*cold = 0;
-				desc = &props->devices[i];
-				break;
-			}
-		}
-	}
-
-	if (desc != NULL && props->identify_state != NULL)
-		props->identify_state(udev, props, &desc, cold);
-
-	return desc;
-}
-
-int dvb_usb_device_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	if (onoff)
-		d->powered++;
-	else
-		d->powered--;
-
-	if (d->powered == 0 || (onoff && d->powered == 1)) { /* when switching from 1 to 0 or from 0 to 1 */
-		deb_info("power control: %d\n", onoff);
-		if (d->props.power_ctrl)
-			return d->props.power_ctrl(d, onoff);
-	}
-	return 0;
-}
-
-/*
- * USB
- */
-int dvb_usb_device_init(struct usb_interface *intf,
-			struct dvb_usb_device_properties *props,
-			struct module *owner, struct dvb_usb_device **du,
-			short *adapter_nums)
-{
-	struct usb_device *udev = interface_to_usbdev(intf);
-	struct dvb_usb_device *d = NULL;
-	struct dvb_usb_device_description *desc = NULL;
-
-	int ret = -ENOMEM, cold = 0;
-
-	if (du != NULL)
-		*du = NULL;
-
-	if ((desc = dvb_usb_find_device(udev, props, &cold)) == NULL) {
-		deb_err("something went very wrong, device was not found in current device list - let's see what comes next.\n");
-		return -ENODEV;
-	}
-
-	if (cold) {
-		info("found a '%s' in cold state, will try to load a firmware", desc->name);
-		ret = dvb_usb_download_firmware(udev, props);
-		if (!props->no_reconnect || ret != 0)
-			return ret;
-	}
-
-	info("found a '%s' in warm state.", desc->name);
-	d = kzalloc(sizeof(struct dvb_usb_device), GFP_KERNEL);
-	if (d == NULL) {
-		err("no memory for 'struct dvb_usb_device'");
-		return -ENOMEM;
-	}
-
-	d->udev = udev;
-	memcpy(&d->props, props, sizeof(struct dvb_usb_device_properties));
-	d->desc = desc;
-	d->owner = owner;
-
-	usb_set_intfdata(intf, d);
-
-	if (du != NULL)
-		*du = d;
-
-	ret = dvb_usb_init(d, adapter_nums);
-
-	if (ret == 0)
-		info("%s successfully initialized and connected.", desc->name);
-	else
-		info("%s error while loading driver (%d)", desc->name, ret);
-	return ret;
-}
-EXPORT_SYMBOL(dvb_usb_device_init);
-
-void dvb_usb_device_exit(struct usb_interface *intf)
-{
-	struct dvb_usb_device *d = usb_get_intfdata(intf);
-	const char *name = "generic DVB-USB module";
-
-	usb_set_intfdata(intf, NULL);
-	if (d != NULL && d->desc != NULL) {
-		name = d->desc->name;
-		dvb_usb_exit(d);
-	}
-	info("%s successfully deinitialized and disconnected.", name);
-
-}
-EXPORT_SYMBOL(dvb_usb_device_exit);
-
-MODULE_VERSION("1.0");
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
-MODULE_DESCRIPTION("A library module containing commonly used USB and DVB function USB DVB devices");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
deleted file mode 100644
index 41bacff..0000000
--- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ /dev/null
@@ -1,391 +0,0 @@
-/* dvb-usb-remote.c is part of the DVB USB library.
- *
- * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
- * see dvb-usb-init.c for copyright information.
- *
- * This file contains functions for initializing the input-device and for handling remote-control-queries.
- */
-#include "dvb-usb-common.h"
-#include <linux/usb/input.h>
-
-static unsigned int
-legacy_dvb_usb_get_keymap_index(const struct input_keymap_entry *ke,
-				struct rc_map_table *keymap,
-				unsigned int keymap_size)
-{
-	unsigned int index;
-	unsigned int scancode;
-
-	if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
-		index = ke->index;
-	} else {
-		if (input_scancode_to_scalar(ke, &scancode))
-			return keymap_size;
-
-		/* See if we can match the raw key code. */
-		for (index = 0; index < keymap_size; index++)
-			if (keymap[index].scancode == scancode)
-				break;
-
-		/* See if there is an unused hole in the map */
-		if (index >= keymap_size) {
-			for (index = 0; index < keymap_size; index++) {
-				if (keymap[index].keycode == KEY_RESERVED ||
-				    keymap[index].keycode == KEY_UNKNOWN) {
-					break;
-				}
-			}
-		}
-	}
-
-	return index;
-}
-
-static int legacy_dvb_usb_getkeycode(struct input_dev *dev,
-				     struct input_keymap_entry *ke)
-{
-	struct dvb_usb_device *d = input_get_drvdata(dev);
-	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
-	unsigned int keymap_size = d->props.rc.legacy.rc_map_size;
-	unsigned int index;
-
-	index = legacy_dvb_usb_get_keymap_index(ke, keymap, keymap_size);
-	if (index >= keymap_size)
-		return -EINVAL;
-
-	ke->keycode = keymap[index].keycode;
-	if (ke->keycode == KEY_UNKNOWN)
-		ke->keycode = KEY_RESERVED;
-	ke->len = sizeof(keymap[index].scancode);
-	memcpy(&ke->scancode, &keymap[index].scancode, ke->len);
-	ke->index = index;
-
-	return 0;
-}
-
-static int legacy_dvb_usb_setkeycode(struct input_dev *dev,
-				     const struct input_keymap_entry *ke,
-				     unsigned int *old_keycode)
-{
-	struct dvb_usb_device *d = input_get_drvdata(dev);
-	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
-	unsigned int keymap_size = d->props.rc.legacy.rc_map_size;
-	unsigned int index;
-
-	index = legacy_dvb_usb_get_keymap_index(ke, keymap, keymap_size);
-	/*
-	 * FIXME: Currently, it is not possible to increase the size of
-	 * scancode table. For it to happen, one possibility
-	 * would be to allocate a table with key_map_size + 1,
-	 * copying data, appending the new key on it, and freeing
-	 * the old one - or maybe just allocating some spare space
-	 */
-	if (index >= keymap_size)
-		return -EINVAL;
-
-	*old_keycode = keymap[index].keycode;
-	keymap->keycode = ke->keycode;
-	__set_bit(ke->keycode, dev->keybit);
-
-	if (*old_keycode != KEY_RESERVED) {
-		__clear_bit(*old_keycode, dev->keybit);
-		for (index = 0; index < keymap_size; index++) {
-			if (keymap[index].keycode == *old_keycode) {
-				__set_bit(*old_keycode, dev->keybit);
-				break;
-			}
-		}
-	}
-
-	return 0;
-}
-
-/* Remote-control poll function - called every dib->rc_query_interval ms to see
- * whether the remote control has received anything.
- *
- * TODO: Fix the repeat rate of the input device.
- */
-static void legacy_dvb_usb_read_remote_control(struct work_struct *work)
-{
-	struct dvb_usb_device *d =
-		container_of(work, struct dvb_usb_device, rc_query_work.work);
-	u32 event;
-	int state;
-
-	/* TODO: need a lock here.  We can simply skip checking for the remote control
-	   if we're busy. */
-
-	/* when the parameter has been set to 1 via sysfs while the driver was running */
-	if (dvb_usb_disable_rc_polling)
-		return;
-
-	if (d->props.rc.legacy.rc_query(d,&event,&state)) {
-		err("error while querying for an remote control event.");
-		goto schedule;
-	}
-
-
-	switch (state) {
-		case REMOTE_NO_KEY_PRESSED:
-			break;
-		case REMOTE_KEY_PRESSED:
-			deb_rc("key pressed\n");
-			d->last_event = event;
-		case REMOTE_KEY_REPEAT:
-			deb_rc("key repeated\n");
-			input_event(d->input_dev, EV_KEY, event, 1);
-			input_sync(d->input_dev);
-			input_event(d->input_dev, EV_KEY, d->last_event, 0);
-			input_sync(d->input_dev);
-			break;
-		default:
-			break;
-	}
-
-/* improved repeat handling ???
-	switch (state) {
-		case REMOTE_NO_KEY_PRESSED:
-			deb_rc("NO KEY PRESSED\n");
-			if (d->last_state != REMOTE_NO_KEY_PRESSED) {
-				deb_rc("releasing event %d\n",d->last_event);
-				input_event(d->rc_input_dev, EV_KEY, d->last_event, 0);
-				input_sync(d->rc_input_dev);
-			}
-			d->last_state = REMOTE_NO_KEY_PRESSED;
-			d->last_event = 0;
-			break;
-		case REMOTE_KEY_PRESSED:
-			deb_rc("KEY PRESSED\n");
-			deb_rc("pressing event %d\n",event);
-
-			input_event(d->rc_input_dev, EV_KEY, event, 1);
-			input_sync(d->rc_input_dev);
-
-			d->last_event = event;
-			d->last_state = REMOTE_KEY_PRESSED;
-			break;
-		case REMOTE_KEY_REPEAT:
-			deb_rc("KEY_REPEAT\n");
-			if (d->last_state != REMOTE_NO_KEY_PRESSED) {
-				deb_rc("repeating event %d\n",d->last_event);
-				input_event(d->rc_input_dev, EV_KEY, d->last_event, 2);
-				input_sync(d->rc_input_dev);
-				d->last_state = REMOTE_KEY_REPEAT;
-			}
-		default:
-			break;
-	}
-*/
-
-schedule:
-	schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc.legacy.rc_interval));
-}
-
-static int legacy_dvb_usb_remote_init(struct dvb_usb_device *d)
-{
-	int i, err, rc_interval;
-	struct input_dev *input_dev;
-
-	input_dev = input_allocate_device();
-	if (!input_dev)
-		return -ENOMEM;
-
-	input_dev->evbit[0] = BIT_MASK(EV_KEY);
-	input_dev->name = "IR-receiver inside an USB DVB receiver";
-	input_dev->phys = d->rc_phys;
-	usb_to_input_id(d->udev, &input_dev->id);
-	input_dev->dev.parent = &d->udev->dev;
-	d->input_dev = input_dev;
-	d->rc_dev = NULL;
-
-	input_dev->getkeycode = legacy_dvb_usb_getkeycode;
-	input_dev->setkeycode = legacy_dvb_usb_setkeycode;
-
-	/* set the bits for the keys */
-	deb_rc("key map size: %d\n", d->props.rc.legacy.rc_map_size);
-	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
-		deb_rc("setting bit for event %d item %d\n",
-			d->props.rc.legacy.rc_map_table[i].keycode, i);
-		set_bit(d->props.rc.legacy.rc_map_table[i].keycode, input_dev->keybit);
-	}
-
-	/* setting these two values to non-zero, we have to manage key repeats */
-	input_dev->rep[REP_PERIOD] = d->props.rc.legacy.rc_interval;
-	input_dev->rep[REP_DELAY]  = d->props.rc.legacy.rc_interval + 150;
-
-	input_set_drvdata(input_dev, d);
-
-	err = input_register_device(input_dev);
-	if (err)
-		input_free_device(input_dev);
-
-	rc_interval = d->props.rc.legacy.rc_interval;
-
-	INIT_DELAYED_WORK(&d->rc_query_work, legacy_dvb_usb_read_remote_control);
-
-	info("schedule remote query interval to %d msecs.", rc_interval);
-	schedule_delayed_work(&d->rc_query_work,
-			      msecs_to_jiffies(rc_interval));
-
-	d->state |= DVB_USB_STATE_REMOTE;
-
-	return err;
-}
-
-/* Remote-control poll function - called every dib->rc_query_interval ms to see
- * whether the remote control has received anything.
- *
- * TODO: Fix the repeat rate of the input device.
- */
-static void dvb_usb_read_remote_control(struct work_struct *work)
-{
-	struct dvb_usb_device *d =
-		container_of(work, struct dvb_usb_device, rc_query_work.work);
-	int err;
-
-	/* TODO: need a lock here.  We can simply skip checking for the remote control
-	   if we're busy. */
-
-	/* when the parameter has been set to 1 via sysfs while the
-	 * driver was running, or when bulk mode is enabled after IR init
-	 */
-	if (dvb_usb_disable_rc_polling || d->props.rc.core.bulk_mode)
-		return;
-
-	err = d->props.rc.core.rc_query(d);
-	if (err)
-		err("error %d while querying for an remote control event.", err);
-
-	schedule_delayed_work(&d->rc_query_work,
-			      msecs_to_jiffies(d->props.rc.core.rc_interval));
-}
-
-static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d)
-{
-	int err, rc_interval;
-	struct rc_dev *dev;
-
-	dev = rc_allocate_device();
-	if (!dev)
-		return -ENOMEM;
-
-	dev->driver_name = d->props.rc.core.module_name;
-	dev->map_name = d->props.rc.core.rc_codes;
-	dev->change_protocol = d->props.rc.core.change_protocol;
-	dev->allowed_protos = d->props.rc.core.allowed_protos;
-	dev->driver_type = d->props.rc.core.driver_type;
-	usb_to_input_id(d->udev, &dev->input_id);
-	dev->input_name = "IR-receiver inside an USB DVB receiver";
-	dev->input_phys = d->rc_phys;
-	dev->dev.parent = &d->udev->dev;
-	dev->priv = d;
-
-	err = rc_register_device(dev);
-	if (err < 0) {
-		rc_free_device(dev);
-		return err;
-	}
-
-	d->input_dev = NULL;
-	d->rc_dev = dev;
-
-	if (!d->props.rc.core.rc_query || d->props.rc.core.bulk_mode)
-		return 0;
-
-	/* Polling mode - initialize a work queue for handling it */
-	INIT_DELAYED_WORK(&d->rc_query_work, dvb_usb_read_remote_control);
-
-	rc_interval = d->props.rc.core.rc_interval;
-
-	info("schedule remote query interval to %d msecs.", rc_interval);
-	schedule_delayed_work(&d->rc_query_work,
-			      msecs_to_jiffies(rc_interval));
-
-	return 0;
-}
-
-int dvb_usb_remote_init(struct dvb_usb_device *d)
-{
-	int err;
-
-	if (dvb_usb_disable_rc_polling)
-		return 0;
-
-	if (d->props.rc.legacy.rc_map_table && d->props.rc.legacy.rc_query)
-		d->props.rc.mode = DVB_RC_LEGACY;
-	else if (d->props.rc.core.rc_codes)
-		d->props.rc.mode = DVB_RC_CORE;
-	else
-		return 0;
-
-	usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
-	strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
-
-	/* Start the remote-control polling. */
-	if (d->props.rc.legacy.rc_interval < 40)
-		d->props.rc.legacy.rc_interval = 100; /* default */
-
-	if (d->props.rc.mode == DVB_RC_LEGACY)
-		err = legacy_dvb_usb_remote_init(d);
-	else
-		err = rc_core_dvb_usb_remote_init(d);
-	if (err)
-		return err;
-
-	d->state |= DVB_USB_STATE_REMOTE;
-
-	return 0;
-}
-
-int dvb_usb_remote_exit(struct dvb_usb_device *d)
-{
-	if (d->state & DVB_USB_STATE_REMOTE) {
-		cancel_delayed_work_sync(&d->rc_query_work);
-		if (d->props.rc.mode == DVB_RC_LEGACY)
-			input_unregister_device(d->input_dev);
-		else
-			rc_unregister_device(d->rc_dev);
-	}
-	d->state &= ~DVB_USB_STATE_REMOTE;
-	return 0;
-}
-
-#define DVB_USB_RC_NEC_EMPTY           0x00
-#define DVB_USB_RC_NEC_KEY_PRESSED     0x01
-#define DVB_USB_RC_NEC_KEY_REPEATED    0x02
-int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *d,
-		u8 keybuf[5], u32 *event, int *state)
-{
-	int i;
-	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
-	*event = 0;
-	*state = REMOTE_NO_KEY_PRESSED;
-	switch (keybuf[0]) {
-		case DVB_USB_RC_NEC_EMPTY:
-			break;
-		case DVB_USB_RC_NEC_KEY_PRESSED:
-			if ((u8) ~keybuf[1] != keybuf[2] ||
-				(u8) ~keybuf[3] != keybuf[4]) {
-				deb_err("remote control checksum failed.\n");
-				break;
-			}
-			/* See if we can match the raw key code. */
-			for (i = 0; i < d->props.rc.legacy.rc_map_size; i++)
-				if (rc5_custom(&keymap[i]) == keybuf[1] &&
-					rc5_data(&keymap[i]) == keybuf[3]) {
-					*event = keymap[i].keycode;
-					*state = REMOTE_KEY_PRESSED;
-					return 0;
-				}
-			deb_err("key mapping failed - no appropriate key found in keymapping\n");
-			break;
-		case DVB_USB_RC_NEC_KEY_REPEATED:
-			*state = REMOTE_KEY_REPEAT;
-			break;
-		default:
-			deb_err("unknown type of remote status: %d\n",keybuf[0]);
-			break;
-	}
-	return 0;
-}
-EXPORT_SYMBOL(dvb_usb_nec_rc_key_to_event);
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c
deleted file mode 100644
index 5c8f651..0000000
--- a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/* dvb-usb-urb.c is part of the DVB USB library.
- *
- * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
- * see dvb-usb-init.c for copyright information.
- *
- * This file keeps functions for initializing and handling the
- * USB and URB stuff.
- */
-#include "dvb-usb-common.h"
-
-int dvb_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf,
-	u16 rlen, int delay_ms)
-{
-	int actlen,ret = -ENOMEM;
-
-	if (!d || wbuf == NULL || wlen == 0)
-		return -EINVAL;
-
-	if (d->props.generic_bulk_ctrl_endpoint == 0) {
-		err("endpoint for generic control not specified.");
-		return -EINVAL;
-	}
-
-	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
-		return ret;
-
-	deb_xfer(">>> ");
-	debug_dump(wbuf,wlen,deb_xfer);
-
-	ret = usb_bulk_msg(d->udev,usb_sndbulkpipe(d->udev,
-			d->props.generic_bulk_ctrl_endpoint), wbuf,wlen,&actlen,
-			2000);
-
-	if (ret)
-		err("bulk message failed: %d (%d/%d)",ret,wlen,actlen);
-	else
-		ret = actlen != wlen ? -1 : 0;
-
-	/* an answer is expected, and no error before */
-	if (!ret && rbuf && rlen) {
-		if (delay_ms)
-			msleep(delay_ms);
-
-		ret = usb_bulk_msg(d->udev,usb_rcvbulkpipe(d->udev,
-				d->props.generic_bulk_ctrl_endpoint_response ?
-				d->props.generic_bulk_ctrl_endpoint_response :
-				d->props.generic_bulk_ctrl_endpoint),rbuf,rlen,&actlen,
-				2000);
-
-		if (ret)
-			err("recv bulk message failed: %d",ret);
-		else {
-			deb_xfer("<<< ");
-			debug_dump(rbuf,actlen,deb_xfer);
-		}
-	}
-
-	mutex_unlock(&d->usb_mutex);
-	return ret;
-}
-EXPORT_SYMBOL(dvb_usb_generic_rw);
-
-int dvb_usb_generic_write(struct dvb_usb_device *d, u8 *buf, u16 len)
-{
-	return dvb_usb_generic_rw(d,buf,len,NULL,0,0);
-}
-EXPORT_SYMBOL(dvb_usb_generic_write);
-
-static void dvb_usb_data_complete(struct usb_data_stream *stream, u8 *buffer, size_t length)
-{
-	struct dvb_usb_adapter *adap = stream->user_priv;
-	if (adap->feedcount > 0 && adap->state & DVB_USB_ADAP_STATE_DVB)
-		dvb_dmx_swfilter(&adap->demux, buffer, length);
-}
-
-static void dvb_usb_data_complete_204(struct usb_data_stream *stream, u8 *buffer, size_t length)
-{
-	struct dvb_usb_adapter *adap = stream->user_priv;
-	if (adap->feedcount > 0 && adap->state & DVB_USB_ADAP_STATE_DVB)
-		dvb_dmx_swfilter_204(&adap->demux, buffer, length);
-}
-
-static void dvb_usb_data_complete_raw(struct usb_data_stream *stream,
-				      u8 *buffer, size_t length)
-{
-	struct dvb_usb_adapter *adap = stream->user_priv;
-	if (adap->feedcount > 0 && adap->state & DVB_USB_ADAP_STATE_DVB)
-		dvb_dmx_swfilter_raw(&adap->demux, buffer, length);
-}
-
-int dvb_usb_adapter_stream_init(struct dvb_usb_adapter *adap)
-{
-	int i, ret = 0;
-	for (i = 0; i < adap->props.num_frontends; i++) {
-
-		adap->fe_adap[i].stream.udev      = adap->dev->udev;
-		if (adap->props.fe[i].caps & DVB_USB_ADAP_RECEIVES_204_BYTE_TS)
-			adap->fe_adap[i].stream.complete =
-				dvb_usb_data_complete_204;
-		else
-		if (adap->props.fe[i].caps & DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD)
-			adap->fe_adap[i].stream.complete =
-				dvb_usb_data_complete_raw;
-		else
-		adap->fe_adap[i].stream.complete  = dvb_usb_data_complete;
-		adap->fe_adap[i].stream.user_priv = adap;
-		ret = usb_urb_init(&adap->fe_adap[i].stream,
-				   &adap->props.fe[i].stream);
-		if (ret < 0)
-			break;
-	}
-	return ret;
-}
-
-int dvb_usb_adapter_stream_exit(struct dvb_usb_adapter *adap)
-{
-	int i;
-	for (i = 0; i < adap->props.num_frontends; i++)
-		usb_urb_exit(&adap->fe_adap[i].stream);
-	return 0;
-}
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
deleted file mode 100644
index 99f9440..0000000
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ /dev/null
@@ -1,485 +0,0 @@
-/* dvb-usb.h is part of the DVB USB library.
- *
- * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
- * see dvb-usb-init.c for copyright information.
- *
- * the headerfile, all dvb-usb-drivers have to include.
- *
- * TODO: clean-up the structures for unused fields and update the comments
- */
-#ifndef __DVB_USB_H__
-#define __DVB_USB_H__
-
-#include <linux/input.h>
-#include <linux/usb.h>
-#include <linux/firmware.h>
-#include <linux/mutex.h>
-#include <media/rc-core.h>
-
-#include "dvb_frontend.h"
-#include "dvb_demux.h"
-#include "dvb_net.h"
-#include "dmxdev.h"
-
-#include "dvb-pll.h"
-
-#include "dvb-usb-ids.h"
-
-/* debug */
-#ifdef CONFIG_DVB_USB_DEBUG
-#define dprintk(var,level,args...) \
-	    do { if ((var & level)) { printk(args); } } while (0)
-
-#define debug_dump(b,l,func) {\
-	int loop_; \
-	for (loop_ = 0; loop_ < l; loop_++) func("%02x ", b[loop_]); \
-	func("\n");\
-}
-#define DVB_USB_DEBUG_STATUS
-#else
-#define dprintk(args...)
-#define debug_dump(b,l,func)
-
-#define DVB_USB_DEBUG_STATUS " (debugging is not enabled)"
-
-#endif
-
-/* generic log methods - taken from usb.h */
-#ifndef DVB_USB_LOG_PREFIX
- #define DVB_USB_LOG_PREFIX "dvb-usb (please define a log prefix)"
-#endif
-
-#undef err
-#define err(format, arg...)  printk(KERN_ERR     DVB_USB_LOG_PREFIX ": " format "\n" , ## arg)
-#undef info
-#define info(format, arg...) printk(KERN_INFO    DVB_USB_LOG_PREFIX ": " format "\n" , ## arg)
-#undef warn
-#define warn(format, arg...) printk(KERN_WARNING DVB_USB_LOG_PREFIX ": " format "\n" , ## arg)
-
-/**
- * struct dvb_usb_device_description - name and its according USB IDs
- * @name: real name of the box, regardless which DVB USB device class is in use
- * @cold_ids: array of struct usb_device_id which describe the device in
- *  pre-firmware state
- * @warm_ids: array of struct usb_device_id which describe the device in
- *  post-firmware state
- *
- * Each DVB USB device class can have one or more actual devices, this struct
- * assigns a name to it.
- */
-struct dvb_usb_device_description {
-	const char *name;
-
-#define DVB_USB_ID_MAX_NUM 15
-	struct usb_device_id *cold_ids[DVB_USB_ID_MAX_NUM];
-	struct usb_device_id *warm_ids[DVB_USB_ID_MAX_NUM];
-};
-
-static inline u8 rc5_custom(struct rc_map_table *key)
-{
-	return (key->scancode >> 8) & 0xff;
-}
-
-static inline u8 rc5_data(struct rc_map_table *key)
-{
-	return key->scancode & 0xff;
-}
-
-static inline u16 rc5_scan(struct rc_map_table *key)
-{
-	return key->scancode & 0xffff;
-}
-
-struct dvb_usb_device;
-struct dvb_usb_adapter;
-struct usb_data_stream;
-
-/**
- * Properties of USB streaming - TODO this structure should be somewhere else
- * describes the kind of USB transfer used for data-streaming.
- *  (BULK or ISOC)
- */
-struct usb_data_stream_properties {
-#define USB_BULK  1
-#define USB_ISOC  2
-	int type;
-	int count;
-	int endpoint;
-
-	union {
-		struct {
-			int buffersize; /* per URB */
-		} bulk;
-		struct {
-			int framesperurb;
-			int framesize;
-			int interval;
-		} isoc;
-	} u;
-};
-
-/**
- * struct dvb_usb_adapter_properties - properties of a dvb-usb-adapter.
- *    A DVB-USB-Adapter is basically a dvb_adapter which is present on a USB-device.
- * @caps: capabilities of the DVB USB device.
- * @pid_filter_count: number of PID filter position in the optional hardware
- *  PID-filter.
- * @num_frontends: number of frontends of the DVB USB adapter.
- * @frontend_ctrl: called to power on/off active frontend.
- * @streaming_ctrl: called to start and stop the MPEG2-TS streaming of the
- *  device (not URB submitting/killing).
- * @pid_filter_ctrl: called to en/disable the PID filter, if any.
- * @pid_filter: called to set/unset a PID for filtering.
- * @frontend_attach: called to attach the possible frontends (fill fe-field
- *  of struct dvb_usb_device).
- * @tuner_attach: called to attach the correct tuner and to fill pll_addr,
- *  pll_desc and pll_init_buf of struct dvb_usb_device).
- * @stream: configuration of the USB streaming
- */
-struct dvb_usb_adapter_fe_properties {
-#define DVB_USB_ADAP_HAS_PID_FILTER               0x01
-#define DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF 0x02
-#define DVB_USB_ADAP_NEED_PID_FILTERING           0x04
-#define DVB_USB_ADAP_RECEIVES_204_BYTE_TS         0x08
-#define DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD         0x10
-	int caps;
-	int pid_filter_count;
-
-	int (*streaming_ctrl)  (struct dvb_usb_adapter *, int);
-	int (*pid_filter_ctrl) (struct dvb_usb_adapter *, int);
-	int (*pid_filter)      (struct dvb_usb_adapter *, int, u16, int);
-
-	int (*frontend_attach) (struct dvb_usb_adapter *);
-	int (*tuner_attach)    (struct dvb_usb_adapter *);
-
-	struct usb_data_stream_properties stream;
-
-	int size_of_priv;
-};
-
-#define MAX_NO_OF_FE_PER_ADAP 3
-struct dvb_usb_adapter_properties {
-	int size_of_priv;
-
-	int (*frontend_ctrl)   (struct dvb_frontend *, int);
-	int (*fe_ioctl_override) (struct dvb_frontend *,
-				  unsigned int, void *, unsigned int);
-
-	int num_frontends;
-	struct dvb_usb_adapter_fe_properties fe[MAX_NO_OF_FE_PER_ADAP];
-};
-
-/**
- * struct dvb_rc_legacy - old properties of remote controller
- * @rc_map_table: a hard-wired array of struct rc_map_table (NULL to disable
- *  remote control handling).
- * @rc_map_size: number of items in @rc_map_table.
- * @rc_query: called to query an event event.
- * @rc_interval: time in ms between two queries.
- */
-struct dvb_rc_legacy {
-/* remote control properties */
-#define REMOTE_NO_KEY_PRESSED      0x00
-#define REMOTE_KEY_PRESSED         0x01
-#define REMOTE_KEY_REPEAT          0x02
-	struct rc_map_table  *rc_map_table;
-	int rc_map_size;
-	int (*rc_query) (struct dvb_usb_device *, u32 *, int *);
-	int rc_interval;
-};
-
-/**
- * struct dvb_rc properties of remote controller, using rc-core
- * @rc_codes: name of rc codes table
- * @protocol: type of protocol(s) currently used by the driver
- * @allowed_protos: protocol(s) supported by the driver
- * @driver_type: Used to point if a device supports raw mode
- * @change_protocol: callback to change protocol
- * @rc_query: called to query an event event.
- * @rc_interval: time in ms between two queries.
- * @bulk_mode: device supports bulk mode for RC (disable polling mode)
- */
-struct dvb_rc {
-	char *rc_codes;
-	u64 protocol;
-	u64 allowed_protos;
-	enum rc_driver_type driver_type;
-	int (*change_protocol)(struct rc_dev *dev, u64 rc_type);
-	char *module_name;
-	int (*rc_query) (struct dvb_usb_device *d);
-	int rc_interval;
-	bool bulk_mode;				/* uses bulk mode */
-};
-
-/**
- * enum dvb_usb_mode - Specifies if it is using a legacy driver or a new one
- *		       based on rc-core
- * This is initialized/used only inside dvb-usb-remote.c.
- * It shouldn't be set by the drivers.
- */
-enum dvb_usb_mode {
-	DVB_RC_LEGACY,
-	DVB_RC_CORE,
-};
-
-/**
- * struct dvb_usb_device_properties - properties of a dvb-usb-device
- * @usb_ctrl: which USB device-side controller is in use. Needed for firmware
- *  download.
- * @firmware: name of the firmware file.
- * @download_firmware: called to download the firmware when the usb_ctrl is
- *  DEVICE_SPECIFIC.
- * @no_reconnect: device doesn't do a reconnect after downloading the firmware,
- *  so do the warm initialization right after it
- *
- * @size_of_priv: how many bytes shall be allocated for the private field
- *  of struct dvb_usb_device.
- *
- * @power_ctrl: called to enable/disable power of the device.
- * @read_mac_address: called to read the MAC address of the device.
- * @identify_state: called to determine the state (cold or warm), when it
- *  is not distinguishable by the USB IDs.
- *
- * @rc: remote controller properties
- *
- * @i2c_algo: i2c_algorithm if the device has I2CoverUSB.
- *
- * @generic_bulk_ctrl_endpoint: most of the DVB USB devices have a generic
- *  endpoint which received control messages with bulk transfers. When this
- *  is non-zero, one can use dvb_usb_generic_rw and dvb_usb_generic_write-
- *  helper functions.
- *
- * @generic_bulk_ctrl_endpoint_response: some DVB USB devices use a separate
- *  endpoint for responses to control messages sent with bulk transfers via
- *  the generic_bulk_ctrl_endpoint. When this is non-zero, this will be used
- *  instead of the generic_bulk_ctrl_endpoint when reading usb responses in
- *  the dvb_usb_generic_rw helper function.
- *
- * @num_device_descs: number of struct dvb_usb_device_description in @devices
- * @devices: array of struct dvb_usb_device_description compatibles with these
- *  properties.
- */
-#define MAX_NO_OF_ADAPTER_PER_DEVICE 2
-struct dvb_usb_device_properties {
-
-#define DVB_USB_IS_AN_I2C_ADAPTER            0x01
-	int caps;
-
-#define DEVICE_SPECIFIC 0
-#define CYPRESS_AN2135  1
-#define CYPRESS_AN2235  2
-#define CYPRESS_FX2     3
-	int        usb_ctrl;
-	int        (*download_firmware) (struct usb_device *, const struct firmware *);
-	const char *firmware;
-	int        no_reconnect;
-
-	int size_of_priv;
-
-	int num_adapters;
-	struct dvb_usb_adapter_properties adapter[MAX_NO_OF_ADAPTER_PER_DEVICE];
-
-	int (*power_ctrl)       (struct dvb_usb_device *, int);
-	int (*read_mac_address) (struct dvb_usb_device *, u8 []);
-	int (*identify_state)   (struct usb_device *, struct dvb_usb_device_properties *,
-			struct dvb_usb_device_description **, int *);
-
-	struct {
-		enum dvb_usb_mode mode;	/* Drivers shouldn't touch on it */
-		struct dvb_rc_legacy legacy;
-		struct dvb_rc core;
-	} rc;
-
-	struct i2c_algorithm *i2c_algo;
-
-	int generic_bulk_ctrl_endpoint;
-	int generic_bulk_ctrl_endpoint_response;
-
-	int num_device_descs;
-	struct dvb_usb_device_description devices[12];
-};
-
-/**
- * struct usb_data_stream - generic object of an USB stream
- * @buf_num: number of buffer allocated.
- * @buf_size: size of each buffer in buf_list.
- * @buf_list: array containing all allocate buffers for streaming.
- * @dma_addr: list of dma_addr_t for each buffer in buf_list.
- *
- * @urbs_initialized: number of URBs initialized.
- * @urbs_submitted: number of URBs submitted.
- */
-#define MAX_NO_URBS_FOR_DATA_STREAM 10
-struct usb_data_stream {
-	struct usb_device                 *udev;
-	struct usb_data_stream_properties  props;
-
-#define USB_STATE_INIT    0x00
-#define USB_STATE_URB_BUF 0x01
-	int state;
-
-	void (*complete) (struct usb_data_stream *, u8 *, size_t);
-
-	struct urb    *urb_list[MAX_NO_URBS_FOR_DATA_STREAM];
-	int            buf_num;
-	unsigned long  buf_size;
-	u8            *buf_list[MAX_NO_URBS_FOR_DATA_STREAM];
-	dma_addr_t     dma_addr[MAX_NO_URBS_FOR_DATA_STREAM];
-
-	int urbs_initialized;
-	int urbs_submitted;
-
-	void *user_priv;
-};
-
-/**
- * struct dvb_usb_adapter - a DVB adapter on a USB device
- * @id: index of this adapter (starting with 0).
- *
- * @feedcount: number of reqested feeds (used for streaming-activation)
- * @pid_filtering: is hardware pid_filtering used or not.
- *
- * @pll_addr: I2C address of the tuner for programming
- * @pll_init: array containing the initialization buffer
- * @pll_desc: pointer to the appropriate struct dvb_pll_desc
- * @tuner_pass_ctrl: called to (de)activate tuner passthru of the demod or the board
- *
- * @dvb_adap: device's dvb_adapter.
- * @dmxdev: device's dmxdev.
- * @demux: device's software demuxer.
- * @dvb_net: device's dvb_net interfaces.
- * @dvb_frontend: device's frontend.
- * @max_feed_count: how many feeds can be handled simultaneously by this
- *  device
- *
- * @fe_init:  rerouted frontend-init (wakeup) function.
- * @fe_sleep: rerouted frontend-sleep function.
- *
- * @stream: the usb data stream.
- */
-struct dvb_usb_fe_adapter {
-	struct dvb_frontend *fe;
-
-	int (*fe_init)  (struct dvb_frontend *);
-	int (*fe_sleep) (struct dvb_frontend *);
-
-	struct usb_data_stream stream;
-
-	int pid_filtering;
-	int max_feed_count;
-
-	void *priv;
-};
-
-struct dvb_usb_adapter {
-	struct dvb_usb_device *dev;
-	struct dvb_usb_adapter_properties props;
-
-#define DVB_USB_ADAP_STATE_INIT 0x000
-#define DVB_USB_ADAP_STATE_DVB  0x001
-	int state;
-
-	u8  id;
-
-	int feedcount;
-
-	/* dvb */
-	struct dvb_adapter   dvb_adap;
-	struct dmxdev        dmxdev;
-	struct dvb_demux     demux;
-	struct dvb_net       dvb_net;
-
-	struct dvb_usb_fe_adapter fe_adap[MAX_NO_OF_FE_PER_ADAP];
-	int active_fe;
-	int num_frontends_initialized;
-
-	void *priv;
-};
-
-/**
- * struct dvb_usb_device - object of a DVB USB device
- * @props: copy of the struct dvb_usb_properties this device belongs to.
- * @desc: pointer to the device's struct dvb_usb_device_description.
- * @state: initialization and runtime state of the device.
- *
- * @powered: indicated whether the device is power or not.
- *  Powered is in/decremented for each call to modify the state.
- * @udev: pointer to the device's struct usb_device.
- *
- * @usb_mutex: semaphore of USB control messages (reading needs two messages)
- * @i2c_mutex: semaphore for i2c-transfers
- *
- * @i2c_adap: device's i2c_adapter if it uses I2CoverUSB
- *
- * @rc_dev: rc device for the remote control (rc-core mode)
- * @input_dev: input device for the remote control (legacy mode)
- * @rc_query_work: struct work_struct frequent rc queries
- * @last_event: last triggered event
- * @last_state: last state (no, pressed, repeat)
- * @owner: owner of the dvb_adapter
- * @priv: private data of the actual driver (allocate by dvb-usb, size defined
- *  in size_of_priv of dvb_usb_properties).
- */
-struct dvb_usb_device {
-	struct dvb_usb_device_properties props;
-	struct dvb_usb_device_description *desc;
-
-	struct usb_device *udev;
-
-#define DVB_USB_STATE_INIT        0x000
-#define DVB_USB_STATE_I2C         0x001
-#define DVB_USB_STATE_DVB         0x002
-#define DVB_USB_STATE_REMOTE      0x004
-	int state;
-
-	int powered;
-
-	/* locking */
-	struct mutex usb_mutex;
-
-	/* i2c */
-	struct mutex i2c_mutex;
-	struct i2c_adapter i2c_adap;
-
-	int                    num_adapters_initialized;
-	struct dvb_usb_adapter adapter[MAX_NO_OF_ADAPTER_PER_DEVICE];
-
-	/* remote control */
-	struct rc_dev *rc_dev;
-	struct input_dev *input_dev;
-	char rc_phys[64];
-	struct delayed_work rc_query_work;
-	u32 last_event;
-	int last_state;
-
-	struct module *owner;
-
-	void *priv;
-};
-
-extern int dvb_usb_device_init(struct usb_interface *,
-			       struct dvb_usb_device_properties *,
-			       struct module *, struct dvb_usb_device **,
-			       short *adapter_nums);
-extern void dvb_usb_device_exit(struct usb_interface *);
-
-/* the generic read/write method for device control */
-extern int dvb_usb_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16,int);
-extern int dvb_usb_generic_write(struct dvb_usb_device *, u8 *, u16);
-
-/* commonly used remote control parsing */
-extern int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *, u8[], u32 *, int *);
-
-/* commonly used firmware download types and function */
-struct hexline {
-	u8 len;
-	u32 addr;
-	u8 type;
-	u8 data[255];
-	u8 chk;
-};
-extern int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw, int type);
-extern int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, int *pos);
-
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c
deleted file mode 100644
index 9382895..0000000
--- a/drivers/media/dvb/dvb-usb/dw2102.c
+++ /dev/null
@@ -1,1951 +0,0 @@
-/* DVB USB framework compliant Linux driver for the
- *	DVBWorld DVB-S 2101, 2102, DVB-S2 2104, DVB-C 3101,
- *	TeVii S600, S630, S650, S660, S480,
- *	Prof 1100, 7500,
- *	Geniatech SU3000 Cards
- * Copyright (C) 2008-2011 Igor M. Liplianin (liplianin@me.by)
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the
- *	Free Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "dw2102.h"
-#include "si21xx.h"
-#include "stv0299.h"
-#include "z0194a.h"
-#include "stv0288.h"
-#include "stb6000.h"
-#include "eds1547.h"
-#include "cx24116.h"
-#include "tda1002x.h"
-#include "mt312.h"
-#include "zl10039.h"
-#include "ds3000.h"
-#include "stv0900.h"
-#include "stv6110.h"
-#include "stb6100.h"
-#include "stb6100_proc.h"
-
-#ifndef USB_PID_DW2102
-#define USB_PID_DW2102 0x2102
-#endif
-
-#ifndef USB_PID_DW2104
-#define USB_PID_DW2104 0x2104
-#endif
-
-#ifndef USB_PID_DW3101
-#define USB_PID_DW3101 0x3101
-#endif
-
-#ifndef USB_PID_CINERGY_S
-#define USB_PID_CINERGY_S 0x0064
-#endif
-
-#ifndef USB_PID_TEVII_S630
-#define USB_PID_TEVII_S630 0xd630
-#endif
-
-#ifndef USB_PID_TEVII_S650
-#define USB_PID_TEVII_S650 0xd650
-#endif
-
-#ifndef USB_PID_TEVII_S660
-#define USB_PID_TEVII_S660 0xd660
-#endif
-
-#ifndef USB_PID_TEVII_S480_1
-#define USB_PID_TEVII_S480_1 0xd481
-#endif
-
-#ifndef USB_PID_TEVII_S480_2
-#define USB_PID_TEVII_S480_2 0xd482
-#endif
-
-#ifndef USB_PID_PROF_1100
-#define USB_PID_PROF_1100 0xb012
-#endif
-
-#define DW210X_READ_MSG 0
-#define DW210X_WRITE_MSG 1
-
-#define REG_1F_SYMBOLRATE_BYTE0 0x1f
-#define REG_20_SYMBOLRATE_BYTE1 0x20
-#define REG_21_SYMBOLRATE_BYTE2 0x21
-/* on my own*/
-#define DW2102_VOLTAGE_CTRL (0x1800)
-#define SU3000_STREAM_CTRL (0x1900)
-#define DW2102_RC_QUERY (0x1a00)
-#define DW2102_LED_CTRL (0x1b00)
-
-#define	err_str "did not find the firmware file. (%s) " \
-		"Please see linux/Documentation/dvb/ for more details " \
-		"on firmware-problems."
-
-struct rc_map_dvb_usb_table_table {
-	struct rc_map_table *rc_keys;
-	int rc_keys_size;
-};
-
-struct su3000_state {
-	u8 initialized;
-};
-
-struct s6x0_state {
-	int (*old_set_voltage)(struct dvb_frontend *f, fe_sec_voltage_t v);
-};
-
-/* debug */
-static int dvb_usb_dw2102_debug;
-module_param_named(debug, dvb_usb_dw2102_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info 2=xfer 4=rc(or-able))."
-						DVB_USB_DEBUG_STATUS);
-
-/* keymaps */
-static int ir_keymap;
-module_param_named(keymap, ir_keymap, int, 0644);
-MODULE_PARM_DESC(keymap, "set keymap 0=default 1=dvbworld 2=tevii 3=tbs  ..."
-			" 256=none");
-
-/* demod probe */
-static int demod_probe = 1;
-module_param_named(demod, demod_probe, int, 0644);
-MODULE_PARM_DESC(demod, "demod to probe (1=cx24116 2=stv0903+stv6110 "
-			"4=stv0903+stb6100(or-able)).");
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static int dw210x_op_rw(struct usb_device *dev, u8 request, u16 value,
-			u16 index, u8 * data, u16 len, int flags)
-{
-	int ret;
-	u8 *u8buf;
-	unsigned int pipe = (flags == DW210X_READ_MSG) ?
-				usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0);
-	u8 request_type = (flags == DW210X_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT;
-
-	u8buf = kmalloc(len, GFP_KERNEL);
-	if (!u8buf)
-		return -ENOMEM;
-
-
-	if (flags == DW210X_WRITE_MSG)
-		memcpy(u8buf, data, len);
-	ret = usb_control_msg(dev, pipe, request, request_type | USB_TYPE_VENDOR,
-				value, index , u8buf, len, 2000);
-
-	if (flags == DW210X_READ_MSG)
-		memcpy(data, u8buf, len);
-
-	kfree(u8buf);
-	return ret;
-}
-
-/* I2C */
-static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
-		int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	int i = 0;
-	u8 buf6[] = {0x2c, 0x05, 0xc0, 0, 0, 0, 0};
-	u16 value;
-
-	if (!d)
-		return -ENODEV;
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	switch (num) {
-	case 2:
-		/* read stv0299 register */
-		value = msg[0].buf[0];/* register */
-		for (i = 0; i < msg[1].len; i++) {
-			dw210x_op_rw(d->udev, 0xb5, value + i, 0,
-					buf6, 2, DW210X_READ_MSG);
-			msg[1].buf[i] = buf6[0];
-		}
-		break;
-	case 1:
-		switch (msg[0].addr) {
-		case 0x68:
-			/* write to stv0299 register */
-			buf6[0] = 0x2a;
-			buf6[1] = msg[0].buf[0];
-			buf6[2] = msg[0].buf[1];
-			dw210x_op_rw(d->udev, 0xb2, 0, 0,
-					buf6, 3, DW210X_WRITE_MSG);
-			break;
-		case 0x60:
-			if (msg[0].flags == 0) {
-			/* write to tuner pll */
-				buf6[0] = 0x2c;
-				buf6[1] = 5;
-				buf6[2] = 0xc0;
-				buf6[3] = msg[0].buf[0];
-				buf6[4] = msg[0].buf[1];
-				buf6[5] = msg[0].buf[2];
-				buf6[6] = msg[0].buf[3];
-				dw210x_op_rw(d->udev, 0xb2, 0, 0,
-						buf6, 7, DW210X_WRITE_MSG);
-			} else {
-			/* read from tuner */
-				dw210x_op_rw(d->udev, 0xb5, 0, 0,
-						buf6, 1, DW210X_READ_MSG);
-				msg[0].buf[0] = buf6[0];
-			}
-			break;
-		case (DW2102_RC_QUERY):
-			dw210x_op_rw(d->udev, 0xb8, 0, 0,
-					buf6, 2, DW210X_READ_MSG);
-			msg[0].buf[0] = buf6[0];
-			msg[0].buf[1] = buf6[1];
-			break;
-		case (DW2102_VOLTAGE_CTRL):
-			buf6[0] = 0x30;
-			buf6[1] = msg[0].buf[0];
-			dw210x_op_rw(d->udev, 0xb2, 0, 0,
-					buf6, 2, DW210X_WRITE_MSG);
-			break;
-		}
-
-		break;
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-	return num;
-}
-
-static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap,
-						struct i2c_msg msg[], int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	u8 buf6[] = {0, 0, 0, 0, 0, 0, 0};
-
-	if (!d)
-		return -ENODEV;
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	switch (num) {
-	case 2:
-		/* read si2109 register by number */
-		buf6[0] = msg[0].addr << 1;
-		buf6[1] = msg[0].len;
-		buf6[2] = msg[0].buf[0];
-		dw210x_op_rw(d->udev, 0xc2, 0, 0,
-				buf6, msg[0].len + 2, DW210X_WRITE_MSG);
-		/* read si2109 register */
-		dw210x_op_rw(d->udev, 0xc3, 0xd0, 0,
-				buf6, msg[1].len + 2, DW210X_READ_MSG);
-		memcpy(msg[1].buf, buf6 + 2, msg[1].len);
-
-		break;
-	case 1:
-		switch (msg[0].addr) {
-		case 0x68:
-			/* write to si2109 register */
-			buf6[0] = msg[0].addr << 1;
-			buf6[1] = msg[0].len;
-			memcpy(buf6 + 2, msg[0].buf, msg[0].len);
-			dw210x_op_rw(d->udev, 0xc2, 0, 0, buf6,
-					msg[0].len + 2, DW210X_WRITE_MSG);
-			break;
-		case(DW2102_RC_QUERY):
-			dw210x_op_rw(d->udev, 0xb8, 0, 0,
-					buf6, 2, DW210X_READ_MSG);
-			msg[0].buf[0] = buf6[0];
-			msg[0].buf[1] = buf6[1];
-			break;
-		case(DW2102_VOLTAGE_CTRL):
-			buf6[0] = 0x30;
-			buf6[1] = msg[0].buf[0];
-			dw210x_op_rw(d->udev, 0xb2, 0, 0,
-					buf6, 2, DW210X_WRITE_MSG);
-			break;
-		}
-		break;
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-	return num;
-}
-
-static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-
-	if (!d)
-		return -ENODEV;
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	switch (num) {
-	case 2: {
-		/* read */
-		/* first write first register number */
-		u8 ibuf[msg[1].len + 2], obuf[3];
-		obuf[0] = msg[0].addr << 1;
-		obuf[1] = msg[0].len;
-		obuf[2] = msg[0].buf[0];
-		dw210x_op_rw(d->udev, 0xc2, 0, 0,
-				obuf, msg[0].len + 2, DW210X_WRITE_MSG);
-		/* second read registers */
-		dw210x_op_rw(d->udev, 0xc3, 0xd1 , 0,
-				ibuf, msg[1].len + 2, DW210X_READ_MSG);
-		memcpy(msg[1].buf, ibuf + 2, msg[1].len);
-
-		break;
-	}
-	case 1:
-		switch (msg[0].addr) {
-		case 0x68: {
-			/* write to register */
-			u8 obuf[msg[0].len + 2];
-			obuf[0] = msg[0].addr << 1;
-			obuf[1] = msg[0].len;
-			memcpy(obuf + 2, msg[0].buf, msg[0].len);
-			dw210x_op_rw(d->udev, 0xc2, 0, 0,
-					obuf, msg[0].len + 2, DW210X_WRITE_MSG);
-			break;
-		}
-		case 0x61: {
-			/* write to tuner */
-			u8 obuf[msg[0].len + 2];
-			obuf[0] = msg[0].addr << 1;
-			obuf[1] = msg[0].len;
-			memcpy(obuf + 2, msg[0].buf, msg[0].len);
-			dw210x_op_rw(d->udev, 0xc2, 0, 0,
-					obuf, msg[0].len + 2, DW210X_WRITE_MSG);
-			break;
-		}
-		case(DW2102_RC_QUERY): {
-			u8 ibuf[2];
-			dw210x_op_rw(d->udev, 0xb8, 0, 0,
-					ibuf, 2, DW210X_READ_MSG);
-			memcpy(msg[0].buf, ibuf , 2);
-			break;
-		}
-		case(DW2102_VOLTAGE_CTRL): {
-			u8 obuf[2];
-			obuf[0] = 0x30;
-			obuf[1] = msg[0].buf[0];
-			dw210x_op_rw(d->udev, 0xb2, 0, 0,
-					obuf, 2, DW210X_WRITE_MSG);
-			break;
-		}
-		}
-
-		break;
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-	return num;
-}
-
-static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	int len, i, j;
-
-	if (!d)
-		return -ENODEV;
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	for (j = 0; j < num; j++) {
-		switch (msg[j].addr) {
-		case(DW2102_RC_QUERY): {
-			u8 ibuf[2];
-			dw210x_op_rw(d->udev, 0xb8, 0, 0,
-					ibuf, 2, DW210X_READ_MSG);
-			memcpy(msg[j].buf, ibuf , 2);
-			break;
-		}
-		case(DW2102_VOLTAGE_CTRL): {
-			u8 obuf[2];
-			obuf[0] = 0x30;
-			obuf[1] = msg[j].buf[0];
-			dw210x_op_rw(d->udev, 0xb2, 0, 0,
-					obuf, 2, DW210X_WRITE_MSG);
-			break;
-		}
-		/*case 0x55: cx24116
-		case 0x6a: stv0903
-		case 0x68: ds3000, stv0903
-		case 0x60: ts2020, stv6110, stb6100 */
-		default: {
-			if (msg[j].flags == I2C_M_RD) {
-				/* read registers */
-				u8  ibuf[msg[j].len + 2];
-				dw210x_op_rw(d->udev, 0xc3,
-						(msg[j].addr << 1) + 1, 0,
-						ibuf, msg[j].len + 2,
-						DW210X_READ_MSG);
-				memcpy(msg[j].buf, ibuf + 2, msg[j].len);
-			mdelay(10);
-			} else if (((msg[j].buf[0] == 0xb0) &&
-						(msg[j].addr == 0x68)) ||
-						((msg[j].buf[0] == 0xf7) &&
-						(msg[j].addr == 0x55))) {
-				/* write firmware */
-				u8 obuf[19];
-				obuf[0] = msg[j].addr << 1;
-				obuf[1] = (msg[j].len > 15 ? 17 : msg[j].len);
-				obuf[2] = msg[j].buf[0];
-				len = msg[j].len - 1;
-				i = 1;
-				do {
-					memcpy(obuf + 3, msg[j].buf + i,
-							(len > 16 ? 16 : len));
-					dw210x_op_rw(d->udev, 0xc2, 0, 0,
-						obuf, (len > 16 ? 16 : len) + 3,
-						DW210X_WRITE_MSG);
-					i += 16;
-					len -= 16;
-				} while (len > 0);
-			} else {
-				/* write registers */
-				u8 obuf[msg[j].len + 2];
-				obuf[0] = msg[j].addr << 1;
-				obuf[1] = msg[j].len;
-				memcpy(obuf + 2, msg[j].buf, msg[j].len);
-				dw210x_op_rw(d->udev, 0xc2, 0, 0,
-						obuf, msg[j].len + 2,
-						DW210X_WRITE_MSG);
-			}
-			break;
-		}
-		}
-
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-	return num;
-}
-
-static int dw3101_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
-								int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	int i;
-
-	if (!d)
-		return -ENODEV;
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	switch (num) {
-	case 2: {
-		/* read */
-		/* first write first register number */
-		u8 ibuf[msg[1].len + 2], obuf[3];
-		obuf[0] = msg[0].addr << 1;
-		obuf[1] = msg[0].len;
-		obuf[2] = msg[0].buf[0];
-		dw210x_op_rw(d->udev, 0xc2, 0, 0,
-				obuf, msg[0].len + 2, DW210X_WRITE_MSG);
-		/* second read registers */
-		dw210x_op_rw(d->udev, 0xc3, 0x19 , 0,
-				ibuf, msg[1].len + 2, DW210X_READ_MSG);
-		memcpy(msg[1].buf, ibuf + 2, msg[1].len);
-
-		break;
-	}
-	case 1:
-		switch (msg[0].addr) {
-		case 0x60:
-		case 0x0c: {
-			/* write to register */
-			u8 obuf[msg[0].len + 2];
-			obuf[0] = msg[0].addr << 1;
-			obuf[1] = msg[0].len;
-			memcpy(obuf + 2, msg[0].buf, msg[0].len);
-			dw210x_op_rw(d->udev, 0xc2, 0, 0,
-					obuf, msg[0].len + 2, DW210X_WRITE_MSG);
-			break;
-		}
-		case(DW2102_RC_QUERY): {
-			u8 ibuf[2];
-			dw210x_op_rw(d->udev, 0xb8, 0, 0,
-					ibuf, 2, DW210X_READ_MSG);
-			memcpy(msg[0].buf, ibuf , 2);
-			break;
-		}
-		}
-
-		break;
-	}
-
-	for (i = 0; i < num; i++) {
-		deb_xfer("%02x:%02x: %s ", i, msg[i].addr,
-				msg[i].flags == 0 ? ">>>" : "<<<");
-		debug_dump(msg[i].buf, msg[i].len, deb_xfer);
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-	return num;
-}
-
-static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
-								int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	struct usb_device *udev;
-	int len, i, j;
-
-	if (!d)
-		return -ENODEV;
-	udev = d->udev;
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	for (j = 0; j < num; j++) {
-		switch (msg[j].addr) {
-		case (DW2102_RC_QUERY): {
-			u8 ibuf[5];
-			dw210x_op_rw(d->udev, 0xb8, 0, 0,
-					ibuf, 5, DW210X_READ_MSG);
-			memcpy(msg[j].buf, ibuf + 3, 2);
-			break;
-		}
-		case (DW2102_VOLTAGE_CTRL): {
-			u8 obuf[2];
-
-			obuf[0] = 1;
-			obuf[1] = msg[j].buf[1];/* off-on */
-			dw210x_op_rw(d->udev, 0x8a, 0, 0,
-					obuf, 2, DW210X_WRITE_MSG);
-			obuf[0] = 3;
-			obuf[1] = msg[j].buf[0];/* 13v-18v */
-			dw210x_op_rw(d->udev, 0x8a, 0, 0,
-					obuf, 2, DW210X_WRITE_MSG);
-			break;
-		}
-		case (DW2102_LED_CTRL): {
-			u8 obuf[2];
-
-			obuf[0] = 5;
-			obuf[1] = msg[j].buf[0];
-			dw210x_op_rw(d->udev, 0x8a, 0, 0,
-					obuf, 2, DW210X_WRITE_MSG);
-			break;
-		}
-		/*case 0x55: cx24116
-		case 0x6a: stv0903
-		case 0x68: ds3000, stv0903
-		case 0x60: ts2020, stv6110, stb6100
-		case 0xa0: eeprom */
-		default: {
-			if (msg[j].flags == I2C_M_RD) {
-				/* read registers */
-				u8 ibuf[msg[j].len];
-				dw210x_op_rw(d->udev, 0x91, 0, 0,
-						ibuf, msg[j].len,
-						DW210X_READ_MSG);
-				memcpy(msg[j].buf, ibuf, msg[j].len);
-				break;
-			} else if ((msg[j].buf[0] == 0xb0) &&
-						(msg[j].addr == 0x68)) {
-				/* write firmware */
-				u8 obuf[19];
-				obuf[0] = (msg[j].len > 16 ?
-						18 : msg[j].len + 1);
-				obuf[1] = msg[j].addr << 1;
-				obuf[2] = msg[j].buf[0];
-				len = msg[j].len - 1;
-				i = 1;
-				do {
-					memcpy(obuf + 3, msg[j].buf + i,
-							(len > 16 ? 16 : len));
-					dw210x_op_rw(d->udev, 0x80, 0, 0,
-						obuf, (len > 16 ? 16 : len) + 3,
-						DW210X_WRITE_MSG);
-					i += 16;
-					len -= 16;
-				} while (len > 0);
-			} else if (j < (num - 1)) {
-				/* write register addr before read */
-				u8 obuf[msg[j].len + 2];
-				obuf[0] = msg[j + 1].len;
-				obuf[1] = (msg[j].addr << 1);
-				memcpy(obuf + 2, msg[j].buf, msg[j].len);
-				dw210x_op_rw(d->udev,
-						udev->descriptor.idProduct ==
-						0x7500 ? 0x92 : 0x90, 0, 0,
-						obuf, msg[j].len + 2,
-						DW210X_WRITE_MSG);
-				break;
-			} else {
-				/* write registers */
-				u8 obuf[msg[j].len + 2];
-				obuf[0] = msg[j].len + 1;
-				obuf[1] = (msg[j].addr << 1);
-				memcpy(obuf + 2, msg[j].buf, msg[j].len);
-				dw210x_op_rw(d->udev, 0x80, 0, 0,
-						obuf, msg[j].len + 2,
-						DW210X_WRITE_MSG);
-				break;
-			}
-			break;
-		}
-		}
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-	return num;
-}
-
-static int su3000_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
-								int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	u8 obuf[0x40], ibuf[0x40];
-
-	if (!d)
-		return -ENODEV;
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	switch (num) {
-	case 1:
-		switch (msg[0].addr) {
-		case SU3000_STREAM_CTRL:
-			obuf[0] = msg[0].buf[0] + 0x36;
-			obuf[1] = 3;
-			obuf[2] = 0;
-			if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 0, 0) < 0)
-				err("i2c transfer failed.");
-			break;
-		case DW2102_RC_QUERY:
-			obuf[0] = 0x10;
-			if (dvb_usb_generic_rw(d, obuf, 1, ibuf, 2, 0) < 0)
-				err("i2c transfer failed.");
-			msg[0].buf[1] = ibuf[0];
-			msg[0].buf[0] = ibuf[1];
-			break;
-		default:
-			/* always i2c write*/
-			obuf[0] = 0x08;
-			obuf[1] = msg[0].addr;
-			obuf[2] = msg[0].len;
-
-			memcpy(&obuf[3], msg[0].buf, msg[0].len);
-
-			if (dvb_usb_generic_rw(d, obuf, msg[0].len + 3,
-						ibuf, 1, 0) < 0)
-				err("i2c transfer failed.");
-
-		}
-		break;
-	case 2:
-		/* always i2c read */
-		obuf[0] = 0x09;
-		obuf[1] = msg[0].len;
-		obuf[2] = msg[1].len;
-		obuf[3] = msg[0].addr;
-		memcpy(&obuf[4], msg[0].buf, msg[0].len);
-
-		if (dvb_usb_generic_rw(d, obuf, msg[0].len + 4,
-					ibuf, msg[1].len + 1, 0) < 0)
-			err("i2c transfer failed.");
-
-		memcpy(msg[1].buf, &ibuf[1], msg[1].len);
-		break;
-	default:
-		warn("more than 2 i2c messages at a time is not handled yet.");
-		break;
-	}
-	mutex_unlock(&d->i2c_mutex);
-	return num;
-}
-
-static u32 dw210x_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm dw2102_i2c_algo = {
-	.master_xfer = dw2102_i2c_transfer,
-	.functionality = dw210x_i2c_func,
-};
-
-static struct i2c_algorithm dw2102_serit_i2c_algo = {
-	.master_xfer = dw2102_serit_i2c_transfer,
-	.functionality = dw210x_i2c_func,
-};
-
-static struct i2c_algorithm dw2102_earda_i2c_algo = {
-	.master_xfer = dw2102_earda_i2c_transfer,
-	.functionality = dw210x_i2c_func,
-};
-
-static struct i2c_algorithm dw2104_i2c_algo = {
-	.master_xfer = dw2104_i2c_transfer,
-	.functionality = dw210x_i2c_func,
-};
-
-static struct i2c_algorithm dw3101_i2c_algo = {
-	.master_xfer = dw3101_i2c_transfer,
-	.functionality = dw210x_i2c_func,
-};
-
-static struct i2c_algorithm s6x0_i2c_algo = {
-	.master_xfer = s6x0_i2c_transfer,
-	.functionality = dw210x_i2c_func,
-};
-
-static struct i2c_algorithm su3000_i2c_algo = {
-	.master_xfer = su3000_i2c_transfer,
-	.functionality = dw210x_i2c_func,
-};
-
-static int dw210x_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
-{
-	int i;
-	u8 ibuf[] = {0, 0};
-	u8 eeprom[256], eepromline[16];
-
-	for (i = 0; i < 256; i++) {
-		if (dw210x_op_rw(d->udev, 0xb6, 0xa0 , i, ibuf, 2, DW210X_READ_MSG) < 0) {
-			err("read eeprom failed.");
-			return -1;
-		} else {
-			eepromline[i%16] = ibuf[0];
-			eeprom[i] = ibuf[0];
-		}
-		if ((i % 16) == 15) {
-			deb_xfer("%02x: ", i - 15);
-			debug_dump(eepromline, 16, deb_xfer);
-		}
-	}
-
-	memcpy(mac, eeprom + 8, 6);
-	return 0;
-};
-
-static int s6x0_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
-{
-	int i, ret;
-	u8 ibuf[] = { 0 }, obuf[] = { 0 };
-	u8 eeprom[256], eepromline[16];
-	struct i2c_msg msg[] = {
-		{
-			.addr = 0xa0 >> 1,
-			.flags = 0,
-			.buf = obuf,
-			.len = 1,
-		}, {
-			.addr = 0xa0 >> 1,
-			.flags = I2C_M_RD,
-			.buf = ibuf,
-			.len = 1,
-		}
-	};
-
-	for (i = 0; i < 256; i++) {
-		obuf[0] = i;
-		ret = s6x0_i2c_transfer(&d->i2c_adap, msg, 2);
-		if (ret != 2) {
-			err("read eeprom failed.");
-			return -1;
-		} else {
-			eepromline[i % 16] = ibuf[0];
-			eeprom[i] = ibuf[0];
-		}
-
-		if ((i % 16) == 15) {
-			deb_xfer("%02x: ", i - 15);
-			debug_dump(eepromline, 16, deb_xfer);
-		}
-	}
-
-	memcpy(mac, eeprom + 16, 6);
-	return 0;
-};
-
-static int su3000_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	static u8 command_start[] = {0x00};
-	static u8 command_stop[] = {0x01};
-	struct i2c_msg msg = {
-		.addr = SU3000_STREAM_CTRL,
-		.flags = 0,
-		.buf = onoff ? command_start : command_stop,
-		.len = 1
-	};
-
-	i2c_transfer(&adap->dev->i2c_adap, &msg, 1);
-
-	return 0;
-}
-
-static int su3000_power_ctrl(struct dvb_usb_device *d, int i)
-{
-	struct su3000_state *state = (struct su3000_state *)d->priv;
-	u8 obuf[] = {0xde, 0};
-
-	info("%s: %d, initialized %d\n", __func__, i, state->initialized);
-
-	if (i && !state->initialized) {
-		state->initialized = 1;
-		/* reset board */
-		dvb_usb_generic_rw(d, obuf, 2, NULL, 0, 0);
-	}
-
-	return 0;
-}
-
-static int su3000_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
-{
-	int i;
-	u8 obuf[] = { 0x1f, 0xf0 };
-	u8 ibuf[] = { 0 };
-	struct i2c_msg msg[] = {
-		{
-			.addr = 0x51,
-			.flags = 0,
-			.buf = obuf,
-			.len = 2,
-		}, {
-			.addr = 0x51,
-			.flags = I2C_M_RD,
-			.buf = ibuf,
-			.len = 1,
-
-		}
-	};
-
-	for (i = 0; i < 6; i++) {
-		obuf[1] = 0xf0 + i;
-		if (i2c_transfer(&d->i2c_adap, msg, 2) != 2)
-			break;
-		else
-			mac[i] = ibuf[0];
-
-		debug_dump(mac, 6, printk);
-	}
-
-	return 0;
-}
-
-static int su3000_identify_state(struct usb_device *udev,
-				 struct dvb_usb_device_properties *props,
-				 struct dvb_usb_device_description **desc,
-				 int *cold)
-{
-	info("%s\n", __func__);
-
-	*cold = 0;
-	return 0;
-}
-
-static int dw210x_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-{
-	static u8 command_13v[] = {0x00, 0x01};
-	static u8 command_18v[] = {0x01, 0x01};
-	static u8 command_off[] = {0x00, 0x00};
-	struct i2c_msg msg = {
-		.addr = DW2102_VOLTAGE_CTRL,
-		.flags = 0,
-		.buf = command_off,
-		.len = 2,
-	};
-
-	struct dvb_usb_adapter *udev_adap =
-		(struct dvb_usb_adapter *)(fe->dvb->priv);
-	if (voltage == SEC_VOLTAGE_18)
-		msg.buf = command_18v;
-	else if (voltage == SEC_VOLTAGE_13)
-		msg.buf = command_13v;
-
-	i2c_transfer(&udev_adap->dev->i2c_adap, &msg, 1);
-
-	return 0;
-}
-
-static int s660_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-{
-	struct dvb_usb_adapter *d =
-		(struct dvb_usb_adapter *)(fe->dvb->priv);
-	struct s6x0_state *st = (struct s6x0_state *)d->dev->priv;
-
-	dw210x_set_voltage(fe, voltage);
-	if (st->old_set_voltage)
-		st->old_set_voltage(fe, voltage);
-
-	return 0;
-}
-
-static void dw210x_led_ctrl(struct dvb_frontend *fe, int offon)
-{
-	static u8 led_off[] = { 0 };
-	static u8 led_on[] = { 1 };
-	struct i2c_msg msg = {
-		.addr = DW2102_LED_CTRL,
-		.flags = 0,
-		.buf = led_off,
-		.len = 1
-	};
-	struct dvb_usb_adapter *udev_adap =
-		(struct dvb_usb_adapter *)(fe->dvb->priv);
-
-	if (offon)
-		msg.buf = led_on;
-	i2c_transfer(&udev_adap->dev->i2c_adap, &msg, 1);
-}
-
-static struct stv0299_config sharp_z0194a_config = {
-	.demod_address = 0x68,
-	.inittab = sharp_z0194a_inittab,
-	.mclk = 88000000UL,
-	.invert = 1,
-	.skip_reinit = 0,
-	.lock_output = STV0299_LOCKOUTPUT_1,
-	.volt13_op0_op1 = STV0299_VOLT13_OP1,
-	.min_delay_ms = 100,
-	.set_symbol_rate = sharp_z0194a_set_symbol_rate,
-};
-
-static struct cx24116_config dw2104_config = {
-	.demod_address = 0x55,
-	.mpg_clk_pos_pol = 0x01,
-};
-
-static struct si21xx_config serit_sp1511lhb_config = {
-	.demod_address = 0x68,
-	.min_delay_ms = 100,
-
-};
-
-static struct tda10023_config dw3101_tda10023_config = {
-	.demod_address = 0x0c,
-	.invert = 1,
-};
-
-static struct mt312_config zl313_config = {
-	.demod_address = 0x0e,
-};
-
-static struct ds3000_config dw2104_ds3000_config = {
-	.demod_address = 0x68,
-};
-
-static struct stv0900_config dw2104a_stv0900_config = {
-	.demod_address = 0x6a,
-	.demod_mode = 0,
-	.xtal = 27000000,
-	.clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
-	.diseqc_mode = 2,/* 2/3 PWM */
-	.tun1_maddress = 0,/* 0x60 */
-	.tun1_adc = 0,/* 2 Vpp */
-	.path1_mode = 3,
-};
-
-static struct stb6100_config dw2104a_stb6100_config = {
-	.tuner_address = 0x60,
-	.refclock = 27000000,
-};
-
-static struct stv0900_config dw2104_stv0900_config = {
-	.demod_address = 0x68,
-	.demod_mode = 0,
-	.xtal = 8000000,
-	.clkmode = 3,
-	.diseqc_mode = 2,
-	.tun1_maddress = 0,
-	.tun1_adc = 1,/* 1 Vpp */
-	.path1_mode = 3,
-};
-
-static struct stv6110_config dw2104_stv6110_config = {
-	.i2c_address = 0x60,
-	.mclk = 16000000,
-	.clk_div = 1,
-};
-
-static struct stv0900_config prof_7500_stv0900_config = {
-	.demod_address = 0x6a,
-	.demod_mode = 0,
-	.xtal = 27000000,
-	.clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
-	.diseqc_mode = 2,/* 2/3 PWM */
-	.tun1_maddress = 0,/* 0x60 */
-	.tun1_adc = 0,/* 2 Vpp */
-	.path1_mode = 3,
-	.tun1_type = 3,
-	.set_lock_led = dw210x_led_ctrl,
-};
-
-static struct ds3000_config su3000_ds3000_config = {
-	.demod_address = 0x68,
-	.ci_mode = 1,
-};
-
-static int dw2104_frontend_attach(struct dvb_usb_adapter *d)
-{
-	struct dvb_tuner_ops *tuner_ops = NULL;
-
-	if (demod_probe & 4) {
-		d->fe_adap[0].fe = dvb_attach(stv0900_attach, &dw2104a_stv0900_config,
-				&d->dev->i2c_adap, 0);
-		if (d->fe_adap[0].fe != NULL) {
-			if (dvb_attach(stb6100_attach, d->fe_adap[0].fe,
-					&dw2104a_stb6100_config,
-					&d->dev->i2c_adap)) {
-				tuner_ops = &d->fe_adap[0].fe->ops.tuner_ops;
-				tuner_ops->set_frequency = stb6100_set_freq;
-				tuner_ops->get_frequency = stb6100_get_freq;
-				tuner_ops->set_bandwidth = stb6100_set_bandw;
-				tuner_ops->get_bandwidth = stb6100_get_bandw;
-				d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
-				info("Attached STV0900+STB6100!\n");
-				return 0;
-			}
-		}
-	}
-
-	if (demod_probe & 2) {
-		d->fe_adap[0].fe = dvb_attach(stv0900_attach, &dw2104_stv0900_config,
-				&d->dev->i2c_adap, 0);
-		if (d->fe_adap[0].fe != NULL) {
-			if (dvb_attach(stv6110_attach, d->fe_adap[0].fe,
-					&dw2104_stv6110_config,
-					&d->dev->i2c_adap)) {
-				d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
-				info("Attached STV0900+STV6110A!\n");
-				return 0;
-			}
-		}
-	}
-
-	if (demod_probe & 1) {
-		d->fe_adap[0].fe = dvb_attach(cx24116_attach, &dw2104_config,
-				&d->dev->i2c_adap);
-		if (d->fe_adap[0].fe != NULL) {
-			d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
-			info("Attached cx24116!\n");
-			return 0;
-		}
-	}
-
-	d->fe_adap[0].fe = dvb_attach(ds3000_attach, &dw2104_ds3000_config,
-			&d->dev->i2c_adap);
-	if (d->fe_adap[0].fe != NULL) {
-		d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
-		info("Attached DS3000!\n");
-		return 0;
-	}
-
-	return -EIO;
-}
-
-static struct dvb_usb_device_properties dw2102_properties;
-static struct dvb_usb_device_properties dw2104_properties;
-static struct dvb_usb_device_properties s6x0_properties;
-
-static int dw2102_frontend_attach(struct dvb_usb_adapter *d)
-{
-	if (dw2102_properties.i2c_algo == &dw2102_serit_i2c_algo) {
-		/*dw2102_properties.adapter->tuner_attach = NULL;*/
-		d->fe_adap[0].fe = dvb_attach(si21xx_attach, &serit_sp1511lhb_config,
-					&d->dev->i2c_adap);
-		if (d->fe_adap[0].fe != NULL) {
-			d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
-			info("Attached si21xx!\n");
-			return 0;
-		}
-	}
-
-	if (dw2102_properties.i2c_algo == &dw2102_earda_i2c_algo) {
-		d->fe_adap[0].fe = dvb_attach(stv0288_attach, &earda_config,
-					&d->dev->i2c_adap);
-		if (d->fe_adap[0].fe != NULL) {
-			if (dvb_attach(stb6000_attach, d->fe_adap[0].fe, 0x61,
-					&d->dev->i2c_adap)) {
-				d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
-				info("Attached stv0288!\n");
-				return 0;
-			}
-		}
-	}
-
-	if (dw2102_properties.i2c_algo == &dw2102_i2c_algo) {
-		/*dw2102_properties.adapter->tuner_attach = dw2102_tuner_attach;*/
-		d->fe_adap[0].fe = dvb_attach(stv0299_attach, &sharp_z0194a_config,
-					&d->dev->i2c_adap);
-		if (d->fe_adap[0].fe != NULL) {
-			d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
-			info("Attached stv0299!\n");
-			return 0;
-		}
-	}
-	return -EIO;
-}
-
-static int dw3101_frontend_attach(struct dvb_usb_adapter *d)
-{
-	d->fe_adap[0].fe = dvb_attach(tda10023_attach, &dw3101_tda10023_config,
-				&d->dev->i2c_adap, 0x48);
-	if (d->fe_adap[0].fe != NULL) {
-		info("Attached tda10023!\n");
-		return 0;
-	}
-	return -EIO;
-}
-
-static int zl100313_frontend_attach(struct dvb_usb_adapter *d)
-{
-	d->fe_adap[0].fe = dvb_attach(mt312_attach, &zl313_config,
-			&d->dev->i2c_adap);
-	if (d->fe_adap[0].fe != NULL) {
-		if (dvb_attach(zl10039_attach, d->fe_adap[0].fe, 0x60,
-				&d->dev->i2c_adap)) {
-			d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
-			info("Attached zl100313+zl10039!\n");
-			return 0;
-		}
-	}
-
-	return -EIO;
-}
-
-static int stv0288_frontend_attach(struct dvb_usb_adapter *d)
-{
-	u8 obuf[] = {7, 1};
-
-	d->fe_adap[0].fe = dvb_attach(stv0288_attach, &earda_config,
-			&d->dev->i2c_adap);
-
-	if (d->fe_adap[0].fe == NULL)
-		return -EIO;
-
-	if (NULL == dvb_attach(stb6000_attach, d->fe_adap[0].fe, 0x61, &d->dev->i2c_adap))
-		return -EIO;
-
-	d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
-
-	dw210x_op_rw(d->dev->udev, 0x8a, 0, 0, obuf, 2, DW210X_WRITE_MSG);
-
-	info("Attached stv0288+stb6000!\n");
-
-	return 0;
-
-}
-
-static int ds3000_frontend_attach(struct dvb_usb_adapter *d)
-{
-	struct s6x0_state *st = (struct s6x0_state *)d->dev->priv;
-	u8 obuf[] = {7, 1};
-
-	d->fe_adap[0].fe = dvb_attach(ds3000_attach, &dw2104_ds3000_config,
-			&d->dev->i2c_adap);
-
-	if (d->fe_adap[0].fe == NULL)
-		return -EIO;
-
-	st->old_set_voltage = d->fe_adap[0].fe->ops.set_voltage;
-	d->fe_adap[0].fe->ops.set_voltage = s660_set_voltage;
-
-	dw210x_op_rw(d->dev->udev, 0x8a, 0, 0, obuf, 2, DW210X_WRITE_MSG);
-
-	info("Attached ds3000+ds2020!\n");
-
-	return 0;
-}
-
-static int prof_7500_frontend_attach(struct dvb_usb_adapter *d)
-{
-	u8 obuf[] = {7, 1};
-
-	d->fe_adap[0].fe = dvb_attach(stv0900_attach, &prof_7500_stv0900_config,
-					&d->dev->i2c_adap, 0);
-	if (d->fe_adap[0].fe == NULL)
-		return -EIO;
-
-	d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
-
-	dw210x_op_rw(d->dev->udev, 0x8a, 0, 0, obuf, 2, DW210X_WRITE_MSG);
-
-	info("Attached STV0900+STB6100A!\n");
-
-	return 0;
-}
-
-static int su3000_frontend_attach(struct dvb_usb_adapter *d)
-{
-	u8 obuf[3] = { 0xe, 0x80, 0 };
-	u8 ibuf[] = { 0 };
-
-	if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
-		err("command 0x0e transfer failed.");
-
-	obuf[0] = 0xe;
-	obuf[1] = 0x83;
-	obuf[2] = 0;
-
-	if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
-		err("command 0x0e transfer failed.");
-
-	obuf[0] = 0xe;
-	obuf[1] = 0x83;
-	obuf[2] = 1;
-
-	if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
-		err("command 0x0e transfer failed.");
-
-	obuf[0] = 0x51;
-
-	if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0)
-		err("command 0x51 transfer failed.");
-
-	d->fe_adap[0].fe = dvb_attach(ds3000_attach, &su3000_ds3000_config,
-					&d->dev->i2c_adap);
-	if (d->fe_adap[0].fe == NULL)
-		return -EIO;
-
-	info("Attached DS3000!\n");
-
-	return 0;
-}
-
-static int dw2102_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60,
-		&adap->dev->i2c_adap, DVB_PLL_OPERA1);
-	return 0;
-}
-
-static int dw3101_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60,
-		&adap->dev->i2c_adap, DVB_PLL_TUA6034);
-
-	return 0;
-}
-
-static struct rc_map_table rc_map_dw210x_table[] = {
-	{ 0xf80a, KEY_POWER2 },		/*power*/
-	{ 0xf80c, KEY_MUTE },		/*mute*/
-	{ 0xf811, KEY_1 },
-	{ 0xf812, KEY_2 },
-	{ 0xf813, KEY_3 },
-	{ 0xf814, KEY_4 },
-	{ 0xf815, KEY_5 },
-	{ 0xf816, KEY_6 },
-	{ 0xf817, KEY_7 },
-	{ 0xf818, KEY_8 },
-	{ 0xf819, KEY_9 },
-	{ 0xf810, KEY_0 },
-	{ 0xf81c, KEY_CHANNELUP },	/*ch+*/
-	{ 0xf80f, KEY_CHANNELDOWN },	/*ch-*/
-	{ 0xf81a, KEY_VOLUMEUP },	/*vol+*/
-	{ 0xf80e, KEY_VOLUMEDOWN },	/*vol-*/
-	{ 0xf804, KEY_RECORD },		/*rec*/
-	{ 0xf809, KEY_FAVORITES },	/*fav*/
-	{ 0xf808, KEY_REWIND },		/*rewind*/
-	{ 0xf807, KEY_FASTFORWARD },	/*fast*/
-	{ 0xf80b, KEY_PAUSE },		/*pause*/
-	{ 0xf802, KEY_ESC },		/*cancel*/
-	{ 0xf803, KEY_TAB },		/*tab*/
-	{ 0xf800, KEY_UP },		/*up*/
-	{ 0xf81f, KEY_OK },		/*ok*/
-	{ 0xf801, KEY_DOWN },		/*down*/
-	{ 0xf805, KEY_CAMERA },		/*cap*/
-	{ 0xf806, KEY_STOP },		/*stop*/
-	{ 0xf840, KEY_ZOOM },		/*full*/
-	{ 0xf81e, KEY_TV },		/*tvmode*/
-	{ 0xf81b, KEY_LAST },		/*recall*/
-};
-
-static struct rc_map_table rc_map_tevii_table[] = {
-	{ 0xf80a, KEY_POWER },
-	{ 0xf80c, KEY_MUTE },
-	{ 0xf811, KEY_1 },
-	{ 0xf812, KEY_2 },
-	{ 0xf813, KEY_3 },
-	{ 0xf814, KEY_4 },
-	{ 0xf815, KEY_5 },
-	{ 0xf816, KEY_6 },
-	{ 0xf817, KEY_7 },
-	{ 0xf818, KEY_8 },
-	{ 0xf819, KEY_9 },
-	{ 0xf810, KEY_0 },
-	{ 0xf81c, KEY_MENU },
-	{ 0xf80f, KEY_VOLUMEDOWN },
-	{ 0xf81a, KEY_LAST },
-	{ 0xf80e, KEY_OPEN },
-	{ 0xf804, KEY_RECORD },
-	{ 0xf809, KEY_VOLUMEUP },
-	{ 0xf808, KEY_CHANNELUP },
-	{ 0xf807, KEY_PVR },
-	{ 0xf80b, KEY_TIME },
-	{ 0xf802, KEY_RIGHT },
-	{ 0xf803, KEY_LEFT },
-	{ 0xf800, KEY_UP },
-	{ 0xf81f, KEY_OK },
-	{ 0xf801, KEY_DOWN },
-	{ 0xf805, KEY_TUNER },
-	{ 0xf806, KEY_CHANNELDOWN },
-	{ 0xf840, KEY_PLAYPAUSE },
-	{ 0xf81e, KEY_REWIND },
-	{ 0xf81b, KEY_FAVORITES },
-	{ 0xf81d, KEY_BACK },
-	{ 0xf84d, KEY_FASTFORWARD },
-	{ 0xf844, KEY_EPG },
-	{ 0xf84c, KEY_INFO },
-	{ 0xf841, KEY_AB },
-	{ 0xf843, KEY_AUDIO },
-	{ 0xf845, KEY_SUBTITLE },
-	{ 0xf84a, KEY_LIST },
-	{ 0xf846, KEY_F1 },
-	{ 0xf847, KEY_F2 },
-	{ 0xf85e, KEY_F3 },
-	{ 0xf85c, KEY_F4 },
-	{ 0xf852, KEY_F5 },
-	{ 0xf85a, KEY_F6 },
-	{ 0xf856, KEY_MODE },
-	{ 0xf858, KEY_SWITCHVIDEOMODE },
-};
-
-static struct rc_map_table rc_map_tbs_table[] = {
-	{ 0xf884, KEY_POWER },
-	{ 0xf894, KEY_MUTE },
-	{ 0xf887, KEY_1 },
-	{ 0xf886, KEY_2 },
-	{ 0xf885, KEY_3 },
-	{ 0xf88b, KEY_4 },
-	{ 0xf88a, KEY_5 },
-	{ 0xf889, KEY_6 },
-	{ 0xf88f, KEY_7 },
-	{ 0xf88e, KEY_8 },
-	{ 0xf88d, KEY_9 },
-	{ 0xf892, KEY_0 },
-	{ 0xf896, KEY_CHANNELUP },
-	{ 0xf891, KEY_CHANNELDOWN },
-	{ 0xf893, KEY_VOLUMEUP },
-	{ 0xf88c, KEY_VOLUMEDOWN },
-	{ 0xf883, KEY_RECORD },
-	{ 0xf898, KEY_PAUSE  },
-	{ 0xf899, KEY_OK },
-	{ 0xf89a, KEY_SHUFFLE },
-	{ 0xf881, KEY_UP },
-	{ 0xf890, KEY_LEFT },
-	{ 0xf882, KEY_RIGHT },
-	{ 0xf888, KEY_DOWN },
-	{ 0xf895, KEY_FAVORITES },
-	{ 0xf897, KEY_SUBTITLE },
-	{ 0xf89d, KEY_ZOOM },
-	{ 0xf89f, KEY_EXIT },
-	{ 0xf89e, KEY_MENU },
-	{ 0xf89c, KEY_EPG },
-	{ 0xf880, KEY_PREVIOUS },
-	{ 0xf89b, KEY_MODE }
-};
-
-static struct rc_map_table rc_map_su3000_table[] = {
-	{ 0x25, KEY_POWER },	/* right-bottom Red */
-	{ 0x0a, KEY_MUTE },	/* -/-- */
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
-	{ 0x00, KEY_0 },
-	{ 0x20, KEY_UP },	/* CH+ */
-	{ 0x21, KEY_DOWN },	/* CH+ */
-	{ 0x12, KEY_VOLUMEUP },	/* Brightness Up */
-	{ 0x13, KEY_VOLUMEDOWN },/* Brightness Down */
-	{ 0x1f, KEY_RECORD },
-	{ 0x17, KEY_PLAY },
-	{ 0x16, KEY_PAUSE },
-	{ 0x0b, KEY_STOP },
-	{ 0x27, KEY_FASTFORWARD },/* >> */
-	{ 0x26, KEY_REWIND },	/* << */
-	{ 0x0d, KEY_OK },	/* Mute */
-	{ 0x11, KEY_LEFT },	/* VOL- */
-	{ 0x10, KEY_RIGHT },	/* VOL+ */
-	{ 0x29, KEY_BACK },	/* button under 9 */
-	{ 0x2c, KEY_MENU },	/* TTX */
-	{ 0x2b, KEY_EPG },	/* EPG */
-	{ 0x1e, KEY_RED },	/* OSD */
-	{ 0x0e, KEY_GREEN },	/* Window */
-	{ 0x2d, KEY_YELLOW },	/* button under << */
-	{ 0x0f, KEY_BLUE },	/* bottom yellow button */
-	{ 0x14, KEY_AUDIO },	/* Snapshot */
-	{ 0x38, KEY_TV },	/* TV/Radio */
-	{ 0x0c, KEY_ESC }	/* upper Red button */
-};
-
-static struct rc_map_dvb_usb_table_table keys_tables[] = {
-	{ rc_map_dw210x_table, ARRAY_SIZE(rc_map_dw210x_table) },
-	{ rc_map_tevii_table, ARRAY_SIZE(rc_map_tevii_table) },
-	{ rc_map_tbs_table, ARRAY_SIZE(rc_map_tbs_table) },
-	{ rc_map_su3000_table, ARRAY_SIZE(rc_map_su3000_table) },
-};
-
-static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
-{
-	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
-	int keymap_size = d->props.rc.legacy.rc_map_size;
-	u8 key[2];
-	struct i2c_msg msg = {
-		.addr = DW2102_RC_QUERY,
-		.flags = I2C_M_RD,
-		.buf = key,
-		.len = 2
-	};
-	int i;
-	/* override keymap */
-	if ((ir_keymap > 0) && (ir_keymap <= ARRAY_SIZE(keys_tables))) {
-		keymap = keys_tables[ir_keymap - 1].rc_keys ;
-		keymap_size = keys_tables[ir_keymap - 1].rc_keys_size;
-	} else if (ir_keymap > ARRAY_SIZE(keys_tables))
-		return 0; /* none */
-
-	*state = REMOTE_NO_KEY_PRESSED;
-	if (d->props.i2c_algo->master_xfer(&d->i2c_adap, &msg, 1) == 1) {
-		for (i = 0; i < keymap_size ; i++) {
-			if (rc5_data(&keymap[i]) == msg.buf[0]) {
-				*state = REMOTE_KEY_PRESSED;
-				*event = keymap[i].keycode;
-				break;
-			}
-
-		}
-
-		if ((*state) == REMOTE_KEY_PRESSED)
-			deb_rc("%s: found rc key: %x, %x, event: %x\n",
-					__func__, key[0], key[1], (*event));
-		else if (key[0] != 0xff)
-			deb_rc("%s: unknown rc key: %x, %x\n",
-					__func__, key[0], key[1]);
-
-	}
-
-	return 0;
-}
-
-enum dw2102_table_entry {
-	CYPRESS_DW2102,
-	CYPRESS_DW2101,
-	CYPRESS_DW2104,
-	TEVII_S650,
-	TERRATEC_CINERGY_S,
-	CYPRESS_DW3101,
-	TEVII_S630,
-	PROF_1100,
-	TEVII_S660,
-	PROF_7500,
-	GENIATECH_SU3000,
-	TERRATEC_CINERGY_S2,
-	TEVII_S480_1,
-	TEVII_S480_2,
-	X3M_SPC1400HD,
-};
-
-static struct usb_device_id dw2102_table[] = {
-	[CYPRESS_DW2102] = {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2102)},
-	[CYPRESS_DW2101] = {USB_DEVICE(USB_VID_CYPRESS, 0x2101)},
-	[CYPRESS_DW2104] = {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2104)},
-	[TEVII_S650] = {USB_DEVICE(0x9022, USB_PID_TEVII_S650)},
-	[TERRATEC_CINERGY_S] = {USB_DEVICE(USB_VID_TERRATEC, USB_PID_CINERGY_S)},
-	[CYPRESS_DW3101] = {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW3101)},
-	[TEVII_S630] = {USB_DEVICE(0x9022, USB_PID_TEVII_S630)},
-	[PROF_1100] = {USB_DEVICE(0x3011, USB_PID_PROF_1100)},
-	[TEVII_S660] = {USB_DEVICE(0x9022, USB_PID_TEVII_S660)},
-	[PROF_7500] = {USB_DEVICE(0x3034, 0x7500)},
-	[GENIATECH_SU3000] = {USB_DEVICE(0x1f4d, 0x3000)},
-	[TERRATEC_CINERGY_S2] = {USB_DEVICE(USB_VID_TERRATEC, 0x00a8)},
-	[TEVII_S480_1] = {USB_DEVICE(0x9022, USB_PID_TEVII_S480_1)},
-	[TEVII_S480_2] = {USB_DEVICE(0x9022, USB_PID_TEVII_S480_2)},
-	[X3M_SPC1400HD] = {USB_DEVICE(0x1f4d, 0x3100)},
-	{ }
-};
-
-MODULE_DEVICE_TABLE(usb, dw2102_table);
-
-static int dw2102_load_firmware(struct usb_device *dev,
-			const struct firmware *frmwr)
-{
-	u8 *b, *p;
-	int ret = 0, i;
-	u8 reset;
-	u8 reset16[] = {0, 0, 0, 0, 0, 0, 0};
-	const struct firmware *fw;
-	const char *fw_2101 = "dvb-usb-dw2101.fw";
-
-	switch (dev->descriptor.idProduct) {
-	case 0x2101:
-		ret = request_firmware(&fw, fw_2101, &dev->dev);
-		if (ret != 0) {
-			err(err_str, fw_2101);
-			return ret;
-		}
-		break;
-	default:
-		fw = frmwr;
-		break;
-	}
-	info("start downloading DW210X firmware");
-	p = kmalloc(fw->size, GFP_KERNEL);
-	reset = 1;
-	/*stop the CPU*/
-	dw210x_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, DW210X_WRITE_MSG);
-	dw210x_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, DW210X_WRITE_MSG);
-
-	if (p != NULL) {
-		memcpy(p, fw->data, fw->size);
-		for (i = 0; i < fw->size; i += 0x40) {
-			b = (u8 *) p + i;
-			if (dw210x_op_rw(dev, 0xa0, i, 0, b , 0x40,
-					DW210X_WRITE_MSG) != 0x40) {
-				err("error while transferring firmware");
-				ret = -EINVAL;
-				break;
-			}
-		}
-		/* restart the CPU */
-		reset = 0;
-		if (ret || dw210x_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1,
-					DW210X_WRITE_MSG) != 1) {
-			err("could not restart the USB controller CPU.");
-			ret = -EINVAL;
-		}
-		if (ret || dw210x_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1,
-					DW210X_WRITE_MSG) != 1) {
-			err("could not restart the USB controller CPU.");
-			ret = -EINVAL;
-		}
-		/* init registers */
-		switch (dev->descriptor.idProduct) {
-		case USB_PID_TEVII_S650:
-			dw2104_properties.rc.legacy.rc_map_table = rc_map_tevii_table;
-			dw2104_properties.rc.legacy.rc_map_size =
-					ARRAY_SIZE(rc_map_tevii_table);
-		case USB_PID_DW2104:
-			reset = 1;
-			dw210x_op_rw(dev, 0xc4, 0x0000, 0, &reset, 1,
-					DW210X_WRITE_MSG);
-			/* break omitted intentionally */
-		case USB_PID_DW3101:
-			reset = 0;
-			dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0,
-					DW210X_WRITE_MSG);
-			break;
-		case USB_PID_CINERGY_S:
-		case USB_PID_DW2102:
-			dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0,
-					DW210X_WRITE_MSG);
-			dw210x_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2,
-					DW210X_READ_MSG);
-			/* check STV0299 frontend  */
-			dw210x_op_rw(dev, 0xb5, 0, 0, &reset16[0], 2,
-					DW210X_READ_MSG);
-			if ((reset16[0] == 0xa1) || (reset16[0] == 0x80)) {
-				dw2102_properties.i2c_algo = &dw2102_i2c_algo;
-				dw2102_properties.adapter->fe[0].tuner_attach = &dw2102_tuner_attach;
-				break;
-			} else {
-				/* check STV0288 frontend  */
-				reset16[0] = 0xd0;
-				reset16[1] = 1;
-				reset16[2] = 0;
-				dw210x_op_rw(dev, 0xc2, 0, 0, &reset16[0], 3,
-						DW210X_WRITE_MSG);
-				dw210x_op_rw(dev, 0xc3, 0xd1, 0, &reset16[0], 3,
-						DW210X_READ_MSG);
-				if (reset16[2] == 0x11) {
-					dw2102_properties.i2c_algo = &dw2102_earda_i2c_algo;
-					break;
-				}
-			}
-		case 0x2101:
-			dw210x_op_rw(dev, 0xbc, 0x0030, 0, &reset16[0], 2,
-					DW210X_READ_MSG);
-			dw210x_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7,
-					DW210X_READ_MSG);
-			dw210x_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7,
-					DW210X_READ_MSG);
-			dw210x_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2,
-					DW210X_READ_MSG);
-			break;
-		}
-
-		msleep(100);
-		kfree(p);
-	}
-	return ret;
-}
-
-static struct dvb_usb_device_properties dw2102_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-	.usb_ctrl = DEVICE_SPECIFIC,
-	.firmware = "dvb-usb-dw2102.fw",
-	.no_reconnect = 1,
-
-	.i2c_algo = &dw2102_serit_i2c_algo,
-
-	.rc.legacy = {
-		.rc_map_table = rc_map_dw210x_table,
-		.rc_map_size = ARRAY_SIZE(rc_map_dw210x_table),
-		.rc_interval = 150,
-		.rc_query = dw2102_rc_query,
-	},
-
-	.generic_bulk_ctrl_endpoint = 0x81,
-	/* parameter for the MPEG2-data transfer */
-	.num_adapters = 1,
-	.download_firmware = dw2102_load_firmware,
-	.read_mac_address = dw210x_read_mac_address,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.frontend_attach = dw2102_frontend_attach,
-			.stream = {
-				.type = USB_BULK,
-				.count = 8,
-				.endpoint = 0x82,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			},
-		}},
-		}
-	},
-	.num_device_descs = 3,
-	.devices = {
-		{"DVBWorld DVB-S 2102 USB2.0",
-			{&dw2102_table[CYPRESS_DW2102], NULL},
-			{NULL},
-		},
-		{"DVBWorld DVB-S 2101 USB2.0",
-			{&dw2102_table[CYPRESS_DW2101], NULL},
-			{NULL},
-		},
-		{"TerraTec Cinergy S USB",
-			{&dw2102_table[TERRATEC_CINERGY_S], NULL},
-			{NULL},
-		},
-	}
-};
-
-static struct dvb_usb_device_properties dw2104_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-	.usb_ctrl = DEVICE_SPECIFIC,
-	.firmware = "dvb-usb-dw2104.fw",
-	.no_reconnect = 1,
-
-	.i2c_algo = &dw2104_i2c_algo,
-	.rc.legacy = {
-		.rc_map_table = rc_map_dw210x_table,
-		.rc_map_size = ARRAY_SIZE(rc_map_dw210x_table),
-		.rc_interval = 150,
-		.rc_query = dw2102_rc_query,
-	},
-
-	.generic_bulk_ctrl_endpoint = 0x81,
-	/* parameter for the MPEG2-data transfer */
-	.num_adapters = 1,
-	.download_firmware = dw2102_load_firmware,
-	.read_mac_address = dw210x_read_mac_address,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.frontend_attach = dw2104_frontend_attach,
-			.stream = {
-				.type = USB_BULK,
-				.count = 8,
-				.endpoint = 0x82,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			},
-		}},
-		}
-	},
-	.num_device_descs = 2,
-	.devices = {
-		{ "DVBWorld DW2104 USB2.0",
-			{&dw2102_table[CYPRESS_DW2104], NULL},
-			{NULL},
-		},
-		{ "TeVii S650 USB2.0",
-			{&dw2102_table[TEVII_S650], NULL},
-			{NULL},
-		},
-	}
-};
-
-static struct dvb_usb_device_properties dw3101_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-	.usb_ctrl = DEVICE_SPECIFIC,
-	.firmware = "dvb-usb-dw3101.fw",
-	.no_reconnect = 1,
-
-	.i2c_algo = &dw3101_i2c_algo,
-	.rc.legacy = {
-		.rc_map_table = rc_map_dw210x_table,
-		.rc_map_size = ARRAY_SIZE(rc_map_dw210x_table),
-		.rc_interval = 150,
-		.rc_query = dw2102_rc_query,
-	},
-
-	.generic_bulk_ctrl_endpoint = 0x81,
-	/* parameter for the MPEG2-data transfer */
-	.num_adapters = 1,
-	.download_firmware = dw2102_load_firmware,
-	.read_mac_address = dw210x_read_mac_address,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.frontend_attach = dw3101_frontend_attach,
-			.tuner_attach = dw3101_tuner_attach,
-			.stream = {
-				.type = USB_BULK,
-				.count = 8,
-				.endpoint = 0x82,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			},
-		}},
-		}
-	},
-	.num_device_descs = 1,
-	.devices = {
-		{ "DVBWorld DVB-C 3101 USB2.0",
-			{&dw2102_table[CYPRESS_DW3101], NULL},
-			{NULL},
-		},
-	}
-};
-
-static struct dvb_usb_device_properties s6x0_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-	.usb_ctrl = DEVICE_SPECIFIC,
-	.size_of_priv = sizeof(struct s6x0_state),
-	.firmware = "dvb-usb-s630.fw",
-	.no_reconnect = 1,
-
-	.i2c_algo = &s6x0_i2c_algo,
-	.rc.legacy = {
-		.rc_map_table = rc_map_tevii_table,
-		.rc_map_size = ARRAY_SIZE(rc_map_tevii_table),
-		.rc_interval = 150,
-		.rc_query = dw2102_rc_query,
-	},
-
-	.generic_bulk_ctrl_endpoint = 0x81,
-	.num_adapters = 1,
-	.download_firmware = dw2102_load_firmware,
-	.read_mac_address = s6x0_read_mac_address,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.frontend_attach = zl100313_frontend_attach,
-			.stream = {
-				.type = USB_BULK,
-				.count = 8,
-				.endpoint = 0x82,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			},
-		}},
-		}
-	},
-	.num_device_descs = 1,
-	.devices = {
-		{"TeVii S630 USB",
-			{&dw2102_table[TEVII_S630], NULL},
-			{NULL},
-		},
-	}
-};
-
-struct dvb_usb_device_properties *p1100;
-static struct dvb_usb_device_description d1100 = {
-	"Prof 1100 USB ",
-	{&dw2102_table[PROF_1100], NULL},
-	{NULL},
-};
-
-struct dvb_usb_device_properties *s660;
-static struct dvb_usb_device_description d660 = {
-	"TeVii S660 USB",
-	{&dw2102_table[TEVII_S660], NULL},
-	{NULL},
-};
-
-static struct dvb_usb_device_description d480_1 = {
-	"TeVii S480.1 USB",
-	{&dw2102_table[TEVII_S480_1], NULL},
-	{NULL},
-};
-
-static struct dvb_usb_device_description d480_2 = {
-	"TeVii S480.2 USB",
-	{&dw2102_table[TEVII_S480_2], NULL},
-	{NULL},
-};
-
-struct dvb_usb_device_properties *p7500;
-static struct dvb_usb_device_description d7500 = {
-	"Prof 7500 USB DVB-S2",
-	{&dw2102_table[PROF_7500], NULL},
-	{NULL},
-};
-
-static struct dvb_usb_device_properties su3000_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-	.usb_ctrl = DEVICE_SPECIFIC,
-	.size_of_priv = sizeof(struct su3000_state),
-	.power_ctrl = su3000_power_ctrl,
-	.num_adapters = 1,
-	.identify_state	= su3000_identify_state,
-	.i2c_algo = &su3000_i2c_algo,
-
-	.rc.legacy = {
-		.rc_map_table = rc_map_su3000_table,
-		.rc_map_size = ARRAY_SIZE(rc_map_su3000_table),
-		.rc_interval = 150,
-		.rc_query = dw2102_rc_query,
-	},
-
-	.read_mac_address = su3000_read_mac_address,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = su3000_streaming_ctrl,
-			.frontend_attach  = su3000_frontend_attach,
-			.stream = {
-				.type = USB_BULK,
-				.count = 8,
-				.endpoint = 0x82,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			}
-		}},
-		}
-	},
-	.num_device_descs = 3,
-	.devices = {
-		{ "SU3000HD DVB-S USB2.0",
-			{ &dw2102_table[GENIATECH_SU3000], NULL },
-			{ NULL },
-		},
-		{ "Terratec Cinergy S2 USB HD",
-			{ &dw2102_table[TERRATEC_CINERGY_S2], NULL },
-			{ NULL },
-		},
-		{ "X3M TV SPC1400HD PCI",
-			{ &dw2102_table[X3M_SPC1400HD], NULL },
-			{ NULL },
-		},
-	}
-};
-
-static int dw2102_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	p1100 = kmemdup(&s6x0_properties,
-			sizeof(struct dvb_usb_device_properties), GFP_KERNEL);
-	if (!p1100)
-		return -ENOMEM;
-	/* copy default structure */
-	/* fill only different fields */
-	p1100->firmware = "dvb-usb-p1100.fw";
-	p1100->devices[0] = d1100;
-	p1100->rc.legacy.rc_map_table = rc_map_tbs_table;
-	p1100->rc.legacy.rc_map_size = ARRAY_SIZE(rc_map_tbs_table);
-	p1100->adapter->fe[0].frontend_attach = stv0288_frontend_attach;
-
-	s660 = kmemdup(&s6x0_properties,
-		       sizeof(struct dvb_usb_device_properties), GFP_KERNEL);
-	if (!s660) {
-		kfree(p1100);
-		return -ENOMEM;
-	}
-	s660->firmware = "dvb-usb-s660.fw";
-	s660->num_device_descs = 3;
-	s660->devices[0] = d660;
-	s660->devices[1] = d480_1;
-	s660->devices[2] = d480_2;
-	s660->adapter->fe[0].frontend_attach = ds3000_frontend_attach;
-
-	p7500 = kmemdup(&s6x0_properties,
-			sizeof(struct dvb_usb_device_properties), GFP_KERNEL);
-	if (!p7500) {
-		kfree(p1100);
-		kfree(s660);
-		return -ENOMEM;
-	}
-	p7500->firmware = "dvb-usb-p7500.fw";
-	p7500->devices[0] = d7500;
-	p7500->rc.legacy.rc_map_table = rc_map_tbs_table;
-	p7500->rc.legacy.rc_map_size = ARRAY_SIZE(rc_map_tbs_table);
-	p7500->adapter->fe[0].frontend_attach = prof_7500_frontend_attach;
-
-	if (0 == dvb_usb_device_init(intf, &dw2102_properties,
-			THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &dw2104_properties,
-			THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &dw3101_properties,
-			THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &s6x0_properties,
-			THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, p1100,
-			THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, s660,
-			THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, p7500,
-			THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &su3000_properties,
-				     THIS_MODULE, NULL, adapter_nr))
-		return 0;
-
-	return -ENODEV;
-}
-
-static struct usb_driver dw2102_driver = {
-	.name = "dw2102",
-	.probe = dw2102_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table = dw2102_table,
-};
-
-module_usb_driver(dw2102_driver);
-
-MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by");
-MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104,"
-				" DVB-C 3101 USB2.0,"
-				" TeVii S600, S630, S650, S660, S480,"
-				" Prof 1100, 7500 USB2.0,"
-				" Geniatech SU3000 devices");
-MODULE_VERSION("0.1");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/dw2102.h b/drivers/media/dvb/dvb-usb/dw2102.h
deleted file mode 100644
index 5cd0b0e..0000000
--- a/drivers/media/dvb/dvb-usb/dw2102.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _DW2102_H_
-#define _DW2102_H_
-
-#define DVB_USB_LOG_PREFIX "dw2102"
-#include "dvb-usb.h"
-
-#define deb_xfer(args...) dprintk(dvb_usb_dw2102_debug, 0x02, args)
-#define deb_rc(args...)   dprintk(dvb_usb_dw2102_debug, 0x04, args)
-#endif
diff --git a/drivers/media/dvb/dvb-usb/ec168.c b/drivers/media/dvb/dvb-usb/ec168.c
deleted file mode 100644
index b4989ba..0000000
--- a/drivers/media/dvb/dvb-usb/ec168.c
+++ /dev/null
@@ -1,435 +0,0 @@
-/*
- * E3C EC168 DVB USB driver
- *
- * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include "ec168.h"
-#include "ec100.h"
-#include "mxl5005s.h"
-
-/* debug */
-static int dvb_usb_ec168_debug;
-module_param_named(debug, dvb_usb_ec168_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static struct ec100_config ec168_ec100_config;
-
-static int ec168_rw_udev(struct usb_device *udev, struct ec168_req *req)
-{
-	int ret;
-	unsigned int pipe;
-	u8 request, requesttype;
-	u8 *buf;
-
-
-
-	switch (req->cmd) {
-	case DOWNLOAD_FIRMWARE:
-	case GPIO:
-	case WRITE_I2C:
-	case STREAMING_CTRL:
-		requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
-		request = req->cmd;
-		break;
-	case READ_I2C:
-		requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
-		request = req->cmd;
-		break;
-	case GET_CONFIG:
-		requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
-		request = CONFIG;
-		break;
-	case SET_CONFIG:
-		requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
-		request = CONFIG;
-		break;
-	case WRITE_DEMOD:
-		requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
-		request = DEMOD_RW;
-		break;
-	case READ_DEMOD:
-		requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
-		request = DEMOD_RW;
-		break;
-	default:
-		err("unknown command:%02x", req->cmd);
-		ret = -EPERM;
-		goto error;
-	}
-
-	buf = kmalloc(req->size, GFP_KERNEL);
-	if (!buf) {
-		ret = -ENOMEM;
-		goto error;
-	}
-
-	if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) {
-		/* write */
-		memcpy(buf, req->data, req->size);
-		pipe = usb_sndctrlpipe(udev, 0);
-	} else {
-		/* read */
-		pipe = usb_rcvctrlpipe(udev, 0);
-	}
-
-	msleep(1); /* avoid I2C errors */
-
-	ret = usb_control_msg(udev, pipe, request, requesttype, req->value,
-		req->index, buf, req->size, EC168_USB_TIMEOUT);
-
-	ec168_debug_dump(request, requesttype, req->value, req->index, buf,
-		req->size, deb_xfer);
-
-	if (ret < 0)
-		goto err_dealloc;
-	else
-		ret = 0;
-
-	/* read request, copy returned data to return buf */
-	if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
-		memcpy(req->data, buf, req->size);
-
-	kfree(buf);
-	return ret;
-
-err_dealloc:
-	kfree(buf);
-error:
-	deb_info("%s: failed:%d\n", __func__, ret);
-	return ret;
-}
-
-static int ec168_ctrl_msg(struct dvb_usb_device *d, struct ec168_req *req)
-{
-	return ec168_rw_udev(d->udev, req);
-}
-
-/* I2C */
-static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
-	int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	struct ec168_req req;
-	int i = 0;
-	int ret;
-
-	if (num > 2)
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	while (i < num) {
-		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
-			if (msg[i].addr == ec168_ec100_config.demod_address) {
-				req.cmd = READ_DEMOD;
-				req.value = 0;
-				req.index = 0xff00 + msg[i].buf[0]; /* reg */
-				req.size = msg[i+1].len; /* bytes to read */
-				req.data = &msg[i+1].buf[0];
-				ret = ec168_ctrl_msg(d, &req);
-				i += 2;
-			} else {
-				err("I2C read not implemented");
-				ret = -ENOSYS;
-				i += 2;
-			}
-		} else {
-			if (msg[i].addr == ec168_ec100_config.demod_address) {
-				req.cmd = WRITE_DEMOD;
-				req.value = msg[i].buf[1]; /* val */
-				req.index = 0xff00 + msg[i].buf[0]; /* reg */
-				req.size = 0;
-				req.data = NULL;
-				ret = ec168_ctrl_msg(d, &req);
-				i += 1;
-			} else {
-				req.cmd = WRITE_I2C;
-				req.value = msg[i].buf[0]; /* val */
-				req.index = 0x0100 + msg[i].addr; /* I2C addr */
-				req.size = msg[i].len-1;
-				req.data = &msg[i].buf[1];
-				ret = ec168_ctrl_msg(d, &req);
-				i += 1;
-			}
-		}
-		if (ret)
-			goto error;
-
-	}
-	ret = i;
-
-error:
-	mutex_unlock(&d->i2c_mutex);
-	return i;
-}
-
-
-static u32 ec168_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm ec168_i2c_algo = {
-	.master_xfer   = ec168_i2c_xfer,
-	.functionality = ec168_i2c_func,
-};
-
-/* Callbacks for DVB USB */
-static struct ec100_config ec168_ec100_config = {
-	.demod_address = 0xff, /* not real address, demod is integrated */
-};
-
-static int ec168_ec100_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	deb_info("%s:\n", __func__);
-	adap->fe_adap[0].fe = dvb_attach(ec100_attach, &ec168_ec100_config,
-		&adap->dev->i2c_adap);
-	if (adap->fe_adap[0].fe == NULL)
-		return -ENODEV;
-
-	return 0;
-}
-
-static struct mxl5005s_config ec168_mxl5003s_config = {
-	.i2c_address     = 0xc6,
-	.if_freq         = IF_FREQ_4570000HZ,
-	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
-	.agc_mode        = MXL_SINGLE_AGC,
-	.tracking_filter = MXL_TF_OFF,
-	.rssi_enable     = MXL_RSSI_ENABLE,
-	.cap_select      = MXL_CAP_SEL_ENABLE,
-	.div_out         = MXL_DIV_OUT_4,
-	.clock_out       = MXL_CLOCK_OUT_DISABLE,
-	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
-	.top		 = MXL5005S_TOP_25P2,
-	.mod_mode        = MXL_DIGITAL_MODE,
-	.if_mode         = MXL_ZERO_IF,
-	.AgcMasterByte   = 0x00,
-};
-
-static int ec168_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	deb_info("%s:\n", __func__);
-	return dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap,
-		&ec168_mxl5003s_config) == NULL ? -ENODEV : 0;
-}
-
-static int ec168_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	struct ec168_req req = {STREAMING_CTRL, 0x7f01, 0x0202, 0, NULL};
-	deb_info("%s: onoff:%d\n", __func__, onoff);
-	if (onoff)
-		req.index = 0x0102;
-	return ec168_ctrl_msg(adap->dev, &req);
-}
-
-static int ec168_download_firmware(struct usb_device *udev,
-	const struct firmware *fw)
-{
-	int i, len, packets, remainder, ret;
-	u16 addr = 0x0000; /* firmware start address */
-	struct ec168_req req = {DOWNLOAD_FIRMWARE, 0, 0, 0, NULL};
-	deb_info("%s:\n", __func__);
-
-	#define FW_PACKET_MAX_DATA  2048
-	packets = fw->size / FW_PACKET_MAX_DATA;
-	remainder = fw->size % FW_PACKET_MAX_DATA;
-	len = FW_PACKET_MAX_DATA;
-	for (i = 0; i <= packets; i++) {
-		if (i == packets)  /* set size of the last packet */
-			len = remainder;
-
-		req.size = len;
-		req.data = (u8 *)(fw->data + i * FW_PACKET_MAX_DATA);
-		req.index = addr;
-		addr += FW_PACKET_MAX_DATA;
-
-		ret = ec168_rw_udev(udev, &req);
-		if (ret) {
-			err("firmware download failed:%d packet:%d", ret, i);
-			goto error;
-		}
-	}
-	req.size = 0;
-
-	/* set "warm"? */
-	req.cmd = SET_CONFIG;
-	req.value = 0;
-	req.index = 0x0001;
-	ret = ec168_rw_udev(udev, &req);
-	if (ret)
-		goto error;
-
-	/* really needed - no idea what does */
-	req.cmd = GPIO;
-	req.value = 0;
-	req.index = 0x0206;
-	ret = ec168_rw_udev(udev, &req);
-	if (ret)
-		goto error;
-
-	/* activate tuner I2C? */
-	req.cmd = WRITE_I2C;
-	req.value = 0;
-	req.index = 0x00c6;
-	ret = ec168_rw_udev(udev, &req);
-	if (ret)
-		goto error;
-
-	return ret;
-error:
-	deb_info("%s: failed:%d\n", __func__, ret);
-	return ret;
-}
-
-static int ec168_identify_state(struct usb_device *udev,
-	struct dvb_usb_device_properties *props,
-	struct dvb_usb_device_description **desc, int *cold)
-{
-	int ret;
-	u8 reply;
-	struct ec168_req req = {GET_CONFIG, 0, 1, sizeof(reply), &reply};
-	deb_info("%s:\n", __func__);
-
-	ret = ec168_rw_udev(udev, &req);
-	if (ret)
-		goto error;
-
-	deb_info("%s: reply:%02x\n", __func__, reply);
-
-	if (reply == 0x01)
-		*cold = 0;
-	else
-		*cold = 1;
-
-	return ret;
-error:
-	deb_info("%s: failed:%d\n", __func__, ret);
-	return ret;
-}
-
-/* DVB USB Driver stuff */
-static struct dvb_usb_device_properties ec168_properties;
-
-static int ec168_probe(struct usb_interface *intf,
-	const struct usb_device_id *id)
-{
-	int ret;
-	deb_info("%s: interface:%d\n", __func__,
-		intf->cur_altsetting->desc.bInterfaceNumber);
-
-	ret = dvb_usb_device_init(intf, &ec168_properties, THIS_MODULE, NULL,
-		adapter_nr);
-	if (ret)
-		goto error;
-
-	return ret;
-error:
-	deb_info("%s: failed:%d\n", __func__, ret);
-	return ret;
-}
-
-#define E3C_EC168_1689                          0
-#define E3C_EC168_FFFA                          1
-#define E3C_EC168_FFFB                          2
-#define E3C_EC168_1001                          3
-#define E3C_EC168_1002                          4
-
-static struct usb_device_id ec168_id[] = {
-	[E3C_EC168_1689] =
-		{USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168)},
-	[E3C_EC168_FFFA] =
-		{USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2)},
-	[E3C_EC168_FFFB] =
-		{USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3)},
-	[E3C_EC168_1001] =
-		{USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4)},
-	[E3C_EC168_1002] =
-		{USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5)},
-	{} /* terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, ec168_id);
-
-static struct dvb_usb_device_properties ec168_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = DEVICE_SPECIFIC,
-	.download_firmware = ec168_download_firmware,
-	.firmware = "dvb-usb-ec168.fw",
-	.no_reconnect = 1,
-
-	.size_of_priv = 0,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = ec168_streaming_ctrl,
-			.frontend_attach  = ec168_ec100_frontend_attach,
-			.tuner_attach     = ec168_mxl5003s_tuner_attach,
-			.stream = {
-				.type = USB_BULK,
-				.count = 6,
-				.endpoint = 0x82,
-				.u = {
-					.bulk = {
-						.buffersize = (32*512),
-					}
-				}
-			},
-		}},
-		}
-	},
-
-	.identify_state = ec168_identify_state,
-
-	.i2c_algo = &ec168_i2c_algo,
-
-	.num_device_descs = 1,
-	.devices = {
-		{
-			.name = "E3C EC168 DVB-T USB2.0 reference design",
-			.cold_ids = {
-				&ec168_id[E3C_EC168_1689],
-				&ec168_id[E3C_EC168_FFFA],
-				&ec168_id[E3C_EC168_FFFB],
-				&ec168_id[E3C_EC168_1001],
-				&ec168_id[E3C_EC168_1002],
-				NULL},
-			.warm_ids = {NULL},
-		},
-	}
-};
-
-static struct usb_driver ec168_driver = {
-	.name       = "dvb_usb_ec168",
-	.probe      = ec168_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table   = ec168_id,
-};
-
-module_usb_driver(ec168_driver);
-
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_DESCRIPTION("E3C EC168 DVB-T USB2.0 driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/ec168.h b/drivers/media/dvb/dvb-usb/ec168.h
deleted file mode 100644
index e7e0b83..0000000
--- a/drivers/media/dvb/dvb-usb/ec168.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * E3C EC168 DVB USB driver
- *
- * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef EC168_H
-#define EC168_H
-
-#define DVB_USB_LOG_PREFIX "ec168"
-#include "dvb-usb.h"
-
-#define deb_info(args...) dprintk(dvb_usb_ec168_debug, 0x01, args)
-#define deb_rc(args...)   dprintk(dvb_usb_ec168_debug, 0x02, args)
-#define deb_xfer(args...) dprintk(dvb_usb_ec168_debug, 0x04, args)
-#define deb_reg(args...)  dprintk(dvb_usb_ec168_debug, 0x08, args)
-#define deb_i2c(args...)  dprintk(dvb_usb_ec168_debug, 0x10, args)
-#define deb_fw(args...)   dprintk(dvb_usb_ec168_debug, 0x20, args)
-
-#define ec168_debug_dump(r, t, v, i, b, l, func) { \
-	int loop_; \
-	func("%02x %02x %02x %02x %02x %02x %02x %02x", \
-		t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, l & 0xff, l >> 8); \
-	if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \
-		func(" >>> "); \
-	else \
-		func(" <<< "); \
-	for (loop_ = 0; loop_ < l; loop_++) \
-		func("%02x ", b[loop_]); \
-	func("\n");\
-}
-
-#define EC168_USB_TIMEOUT 1000
-
-struct ec168_req {
-	u8  cmd;       /* [1] */
-	u16 value;     /* [2|3] */
-	u16 index;     /* [4|5] */
-	u16 size;      /* [6|7] */
-	u8  *data;
-};
-
-enum ec168_cmd {
-	DOWNLOAD_FIRMWARE    = 0x00,
-	CONFIG               = 0x01,
-	DEMOD_RW             = 0x03,
-	GPIO                 = 0x04,
-	STREAMING_CTRL       = 0x10,
-	READ_I2C             = 0x20,
-	WRITE_I2C            = 0x21,
-	HID_DOWNLOAD         = 0x30,
-	GET_CONFIG,
-	SET_CONFIG,
-	READ_DEMOD,
-	WRITE_DEMOD,
-};
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c
deleted file mode 100644
index 90a70c6..0000000
--- a/drivers/media/dvb/dvb-usb/friio-fe.c
+++ /dev/null
@@ -1,473 +0,0 @@
-/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
- *
- * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
- *
- * This module is based off the the gl861 and vp702x modules.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "friio.h"
-
-struct jdvbt90502_state {
-	struct i2c_adapter *i2c;
-	struct dvb_frontend frontend;
-	struct jdvbt90502_config config;
-};
-
-/* NOTE: TC90502 has 16bit register-address? */
-/* register 0x0100 is used for reading PLL status, so reg is u16 here */
-static int jdvbt90502_reg_read(struct jdvbt90502_state *state,
-			       const u16 reg, u8 *buf, const size_t count)
-{
-	int ret;
-	u8 wbuf[3];
-	struct i2c_msg msg[2];
-
-	wbuf[0] = reg & 0xFF;
-	wbuf[1] = 0;
-	wbuf[2] = reg >> 8;
-
-	msg[0].addr = state->config.demod_address;
-	msg[0].flags = 0;
-	msg[0].buf = wbuf;
-	msg[0].len = sizeof(wbuf);
-
-	msg[1].addr = msg[0].addr;
-	msg[1].flags = I2C_M_RD;
-	msg[1].buf = buf;
-	msg[1].len = count;
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-	if (ret != 2) {
-		deb_fe(" reg read failed.\n");
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-
-/* currently 16bit register-address is not used, so reg is u8 here */
-static int jdvbt90502_single_reg_write(struct jdvbt90502_state *state,
-				       const u8 reg, const u8 val)
-{
-	struct i2c_msg msg;
-	u8 wbuf[2];
-
-	wbuf[0] = reg;
-	wbuf[1] = val;
-
-	msg.addr = state->config.demod_address;
-	msg.flags = 0;
-	msg.buf = wbuf;
-	msg.len = sizeof(wbuf);
-
-	if (i2c_transfer(state->i2c, &msg, 1) != 1) {
-		deb_fe(" reg write failed.");
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-
-static int _jdvbt90502_write(struct dvb_frontend *fe, const u8 buf[], int len)
-{
-	struct jdvbt90502_state *state = fe->demodulator_priv;
-	int err, i;
-	for (i = 0; i < len - 1; i++) {
-		err = jdvbt90502_single_reg_write(state,
-						  buf[0] + i, buf[i + 1]);
-		if (err)
-			return err;
-	}
-
-	return 0;
-}
-
-/* read pll status byte via the demodulator's I2C register */
-/* note: Win box reads it by 8B block at the I2C addr 0x30 from reg:0x80 */
-static int jdvbt90502_pll_read(struct jdvbt90502_state *state, u8 *result)
-{
-	int ret;
-
-	/* +1 for reading */
-	u8 pll_addr_byte = (state->config.pll_address << 1) + 1;
-
-	*result = 0;
-
-	ret = jdvbt90502_single_reg_write(state, JDVBT90502_2ND_I2C_REG,
-					  pll_addr_byte);
-	if (ret)
-		goto error;
-
-	ret = jdvbt90502_reg_read(state, 0x0100, result, 1);
-	if (ret)
-		goto error;
-
-	deb_fe("PLL read val:%02x\n", *result);
-	return 0;
-
-error:
-	deb_fe("%s:ret == %d\n", __func__, ret);
-	return -EREMOTEIO;
-}
-
-
-/* set pll frequency via the demodulator's I2C register */
-static int jdvbt90502_pll_set_freq(struct jdvbt90502_state *state, u32 freq)
-{
-	int ret;
-	int retry;
-	u8 res1;
-	u8 res2[9];
-
-	u8 pll_freq_cmd[PLL_CMD_LEN];
-	u8 pll_agc_cmd[PLL_CMD_LEN];
-	struct i2c_msg msg[2];
-	u32 f;
-
-	deb_fe("%s: freq=%d, step=%d\n", __func__, freq,
-	       state->frontend.ops.info.frequency_stepsize);
-	/* freq -> oscilator frequency conversion. */
-	/* freq: 473,000,000 + n*6,000,000 [+ 142857 (center freq. shift)] */
-	f = freq / state->frontend.ops.info.frequency_stepsize;
-	/* add 399[1/7 MHZ] = 57MHz for the IF  */
-	f += 399;
-	/* add center frequency shift if necessary */
-	if (f % 7 == 0)
-		f++;
-	pll_freq_cmd[DEMOD_REDIRECT_REG] = JDVBT90502_2ND_I2C_REG; /* 0xFE */
-	pll_freq_cmd[ADDRESS_BYTE] = state->config.pll_address << 1;
-	pll_freq_cmd[DIVIDER_BYTE1] = (f >> 8) & 0x7F;
-	pll_freq_cmd[DIVIDER_BYTE2] = f & 0xFF;
-	pll_freq_cmd[CONTROL_BYTE] = 0xB2; /* ref.divider:28, 4MHz/28=1/7MHz */
-	pll_freq_cmd[BANDSWITCH_BYTE] = 0x08;	/* UHF band */
-
-	msg[0].addr = state->config.demod_address;
-	msg[0].flags = 0;
-	msg[0].buf = pll_freq_cmd;
-	msg[0].len = sizeof(pll_freq_cmd);
-
-	ret = i2c_transfer(state->i2c, &msg[0], 1);
-	if (ret != 1)
-		goto error;
-
-	udelay(50);
-
-	pll_agc_cmd[DEMOD_REDIRECT_REG] = pll_freq_cmd[DEMOD_REDIRECT_REG];
-	pll_agc_cmd[ADDRESS_BYTE] = pll_freq_cmd[ADDRESS_BYTE];
-	pll_agc_cmd[DIVIDER_BYTE1] = pll_freq_cmd[DIVIDER_BYTE1];
-	pll_agc_cmd[DIVIDER_BYTE2] = pll_freq_cmd[DIVIDER_BYTE2];
-	pll_agc_cmd[CONTROL_BYTE] = 0x9A; /*  AGC_CTRL instead of BANDSWITCH */
-	pll_agc_cmd[AGC_CTRL_BYTE] = 0x50;
-	/* AGC Time Constant 2s, AGC take-over point:103dBuV(lowest) */
-
-	msg[1].addr = msg[0].addr;
-	msg[1].flags = 0;
-	msg[1].buf = pll_agc_cmd;
-	msg[1].len = sizeof(pll_agc_cmd);
-
-	ret = i2c_transfer(state->i2c, &msg[1], 1);
-	if (ret != 1)
-		goto error;
-
-	/* I don't know what these cmds are for,  */
-	/* but the USB log on a windows box contains them */
-	ret = jdvbt90502_single_reg_write(state, 0x01, 0x40);
-	ret |= jdvbt90502_single_reg_write(state, 0x01, 0x00);
-	if (ret)
-		goto error;
-	udelay(100);
-
-	/* wait for the demod to be ready? */
-#define RETRY_COUNT 5
-	for (retry = 0; retry < RETRY_COUNT; retry++) {
-		ret = jdvbt90502_reg_read(state, 0x0096, &res1, 1);
-		if (ret)
-			goto error;
-		/* if (res1 != 0x00) goto error; */
-		ret = jdvbt90502_reg_read(state, 0x00B0, res2, sizeof(res2));
-		if (ret)
-			goto error;
-		if (res2[0] >= 0xA7)
-			break;
-		msleep(100);
-	}
-	if (retry >= RETRY_COUNT) {
-		deb_fe("%s: FE does not get ready after freq setting.\n",
-		       __func__);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-error:
-	deb_fe("%s:ret == %d\n", __func__, ret);
-	return -EREMOTEIO;
-}
-
-static int jdvbt90502_read_status(struct dvb_frontend *fe, fe_status_t *state)
-{
-	u8 result;
-	int ret;
-
-	*state = FE_HAS_SIGNAL;
-
-	ret = jdvbt90502_pll_read(fe->demodulator_priv, &result);
-	if (ret) {
-		deb_fe("%s:ret == %d\n", __func__, ret);
-		return -EREMOTEIO;
-	}
-
-	*state = FE_HAS_SIGNAL
-		| FE_HAS_CARRIER
-		| FE_HAS_VITERBI
-		| FE_HAS_SYNC;
-
-	if (result & PLL_STATUS_LOCKED)
-		*state |= FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int jdvbt90502_read_signal_strength(struct dvb_frontend *fe,
-					   u16 *strength)
-{
-	int ret;
-	u8 rbuf[37];
-
-	*strength = 0;
-
-	/* status register (incl. signal strength) : 0x89  */
-	/* TODO: read just the necessary registers [0x8B..0x8D]? */
-	ret = jdvbt90502_reg_read(fe->demodulator_priv, 0x0089,
-				  rbuf, sizeof(rbuf));
-
-	if (ret) {
-		deb_fe("%s:ret == %d\n", __func__, ret);
-		return -EREMOTEIO;
-	}
-
-	/* signal_strength: rbuf[2-4] (24bit BE), use lower 16bit for now. */
-	*strength = (rbuf[3] << 8) + rbuf[4];
-	if (rbuf[2])
-		*strength = 0xffff;
-
-	return 0;
-}
-
-
-/* filter out un-supported properties to notify users */
-static int jdvbt90502_set_property(struct dvb_frontend *fe,
-				   struct dtv_property *tvp)
-{
-	int r = 0;
-
-	switch (tvp->cmd) {
-	case DTV_DELIVERY_SYSTEM:
-		if (tvp->u.data != SYS_ISDBT)
-			r = -EINVAL;
-		break;
-	case DTV_CLEAR:
-	case DTV_TUNE:
-	case DTV_FREQUENCY:
-		break;
-	default:
-		r = -EINVAL;
-	}
-	return r;
-}
-
-static int jdvbt90502_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	p->inversion = INVERSION_AUTO;
-	p->bandwidth_hz = 6000000;
-	p->code_rate_HP = FEC_AUTO;
-	p->code_rate_LP = FEC_AUTO;
-	p->modulation = QAM_64;
-	p->transmission_mode = TRANSMISSION_MODE_AUTO;
-	p->guard_interval = GUARD_INTERVAL_AUTO;
-	p->hierarchy = HIERARCHY_AUTO;
-	return 0;
-}
-
-static int jdvbt90502_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-
-	/**
-	 * NOTE: ignore all the parameters except frequency.
-	 *       others should be fixed to the proper value for ISDB-T,
-	 *       but don't check here.
-	 */
-
-	struct jdvbt90502_state *state = fe->demodulator_priv;
-	int ret;
-
-	deb_fe("%s: Freq:%d\n", __func__, p->frequency);
-
-	/* for recovery from DTV_CLEAN */
-	fe->dtv_property_cache.delivery_system = SYS_ISDBT;
-
-	ret = jdvbt90502_pll_set_freq(state, p->frequency);
-	if (ret) {
-		deb_fe("%s:ret == %d\n", __func__, ret);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-
-/**
- * (reg, val) commad list to initialize this module.
- *  captured on a Windows box.
- */
-static u8 init_code[][2] = {
-	{0x01, 0x40},
-	{0x04, 0x38},
-	{0x05, 0x40},
-	{0x07, 0x40},
-	{0x0F, 0x4F},
-	{0x11, 0x21},
-	{0x12, 0x0B},
-	{0x13, 0x2F},
-	{0x14, 0x31},
-	{0x16, 0x02},
-	{0x21, 0xC4},
-	{0x22, 0x20},
-	{0x2C, 0x79},
-	{0x2D, 0x34},
-	{0x2F, 0x00},
-	{0x30, 0x28},
-	{0x31, 0x31},
-	{0x32, 0xDF},
-	{0x38, 0x01},
-	{0x39, 0x78},
-	{0x3B, 0x33},
-	{0x3C, 0x33},
-	{0x48, 0x90},
-	{0x51, 0x68},
-	{0x5E, 0x38},
-	{0x71, 0x00},
-	{0x72, 0x08},
-	{0x77, 0x00},
-	{0xC0, 0x21},
-	{0xC1, 0x10},
-	{0xE4, 0x1A},
-	{0xEA, 0x1F},
-	{0x77, 0x00},
-	{0x71, 0x00},
-	{0x71, 0x00},
-	{0x76, 0x0C},
-};
-
-static const int init_code_len = sizeof(init_code) / sizeof(u8[2]);
-
-static int jdvbt90502_init(struct dvb_frontend *fe)
-{
-	int i = -1;
-	int ret;
-	struct i2c_msg msg;
-
-	struct jdvbt90502_state *state = fe->demodulator_priv;
-
-	deb_fe("%s called.\n", __func__);
-
-	msg.addr = state->config.demod_address;
-	msg.flags = 0;
-	msg.len = 2;
-	for (i = 0; i < init_code_len; i++) {
-		msg.buf = init_code[i];
-		ret = i2c_transfer(state->i2c, &msg, 1);
-		if (ret != 1)
-			goto error;
-	}
-	fe->dtv_property_cache.delivery_system = SYS_ISDBT;
-	msleep(100);
-
-	return 0;
-
-error:
-	deb_fe("%s: init_code[%d] failed. ret==%d\n", __func__, i, ret);
-	return -EREMOTEIO;
-}
-
-
-static void jdvbt90502_release(struct dvb_frontend *fe)
-{
-	struct jdvbt90502_state *state = fe->demodulator_priv;
-	kfree(state);
-}
-
-
-static struct dvb_frontend_ops jdvbt90502_ops;
-
-struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d)
-{
-	struct jdvbt90502_state *state = NULL;
-
-	deb_info("%s called.\n", __func__);
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct jdvbt90502_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->i2c = &d->i2c_adap;
-	memcpy(&state->config, &friio_fe_config, sizeof(friio_fe_config));
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &jdvbt90502_ops,
-	       sizeof(jdvbt90502_ops));
-	state->frontend.demodulator_priv = state;
-
-	if (jdvbt90502_init(&state->frontend) < 0)
-		goto error;
-
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops jdvbt90502_ops = {
-	.delsys = { SYS_ISDBT },
-	.info = {
-		.name			= "Comtech JDVBT90502 ISDB-T",
-		.frequency_min		= 473000000, /* UHF 13ch, center */
-		.frequency_max		= 767142857, /* UHF 62ch, center */
-		.frequency_stepsize	= JDVBT90502_PLL_CLK / JDVBT90502_PLL_DIVIDER,
-		.frequency_tolerance	= 0,
-
-		/* NOTE: this driver ignores all parameters but frequency. */
-		.caps = FE_CAN_INVERSION_AUTO |
-			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
-			FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
-			FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO |
-			FE_CAN_GUARD_INTERVAL_AUTO |
-			FE_CAN_HIERARCHY_AUTO,
-	},
-
-	.release = jdvbt90502_release,
-
-	.init = jdvbt90502_init,
-	.write = _jdvbt90502_write,
-
-	.set_property = jdvbt90502_set_property,
-
-	.set_frontend = jdvbt90502_set_frontend,
-	.get_frontend = jdvbt90502_get_frontend,
-
-	.read_status = jdvbt90502_read_status,
-	.read_signal_strength = jdvbt90502_read_signal_strength,
-};
diff --git a/drivers/media/dvb/dvb-usb/friio.c b/drivers/media/dvb/dvb-usb/friio.c
deleted file mode 100644
index 474a17e..0000000
--- a/drivers/media/dvb/dvb-usb/friio.c
+++ /dev/null
@@ -1,522 +0,0 @@
-/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
- *
- * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
- *
- * This module is based off the the gl861 and vp702x modules.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "friio.h"
-
-/* debug */
-int dvb_usb_friio_debug;
-module_param_named(debug, dvb_usb_friio_debug, int, 0644);
-MODULE_PARM_DESC(debug,
-		 "set debugging level (1=info,2=xfer,4=rc,8=fe (or-able))."
-		 DVB_USB_DEBUG_STATUS);
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-/**
- * Indirect I2C access to the PLL via FE.
- * whole I2C protocol data to the PLL is sent via the FE's I2C register.
- * This is done by a control msg to the FE with the I2C data accompanied, and
- * a specific USB request number is assigned for that purpose.
- *
- * this func sends wbuf[1..] to the I2C register wbuf[0] at addr (= at FE).
- * TODO: refoctored, smarter i2c functions.
- */
-static int gl861_i2c_ctrlmsg_data(struct dvb_usb_device *d, u8 addr,
-				  u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
-{
-	u16 index = wbuf[0];	/* must be JDVBT90502_2ND_I2C_REG(=0xFE) */
-	u16 value = addr << (8 + 1);
-	int wo = (rbuf == NULL || rlen == 0);	/* write only */
-	u8 req, type;
-
-	deb_xfer("write to PLL:0x%02x via FE reg:0x%02x, len:%d\n",
-		 wbuf[1], wbuf[0], wlen - 1);
-
-	if (wo && wlen >= 2) {
-		req = GL861_REQ_I2C_DATA_CTRL_WRITE;
-		type = GL861_WRITE;
-		udelay(20);
-		return usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
-				       req, type, value, index,
-				       &wbuf[1], wlen - 1, 2000);
-	}
-
-	deb_xfer("not supported ctrl-msg, aborting.");
-	return -EINVAL;
-}
-
-/* normal I2C access (without extra data arguments).
- * write to the register wbuf[0] at I2C address addr with the value wbuf[1],
- *  or read from the register wbuf[0].
- * register address can be 16bit (wbuf[2]<<8 | wbuf[0]) if wlen==3
- */
-static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
-			 u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
-{
-	u16 index;
-	u16 value = addr << (8 + 1);
-	int wo = (rbuf == NULL || rlen == 0);	/* write-only */
-	u8 req, type;
-	unsigned int pipe;
-
-	/* special case for the indirect I2C access to the PLL via FE, */
-	if (addr == friio_fe_config.demod_address &&
-	    wbuf[0] == JDVBT90502_2ND_I2C_REG)
-		return gl861_i2c_ctrlmsg_data(d, addr, wbuf, wlen, rbuf, rlen);
-
-	if (wo) {
-		req = GL861_REQ_I2C_WRITE;
-		type = GL861_WRITE;
-		pipe = usb_sndctrlpipe(d->udev, 0);
-	} else {		/* rw */
-		req = GL861_REQ_I2C_READ;
-		type = GL861_READ;
-		pipe = usb_rcvctrlpipe(d->udev, 0);
-	}
-
-	switch (wlen) {
-	case 1:
-		index = wbuf[0];
-		break;
-	case 2:
-		index = wbuf[0];
-		value = value + wbuf[1];
-		break;
-	case 3:
-		/* special case for 16bit register-address */
-		index = (wbuf[2] << 8) | wbuf[0];
-		value = value + wbuf[1];
-		break;
-	default:
-		deb_xfer("wlen = %x, aborting.", wlen);
-		return -EINVAL;
-	}
-	msleep(1);
-	return usb_control_msg(d->udev, pipe, req, type,
-			       value, index, rbuf, rlen, 2000);
-}
-
-/* I2C */
-static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
-			  int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	int i;
-
-
-	if (num > 2)
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	for (i = 0; i < num; i++) {
-		/* write/read request */
-		if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) {
-			if (gl861_i2c_msg(d, msg[i].addr,
-					  msg[i].buf, msg[i].len,
-					  msg[i + 1].buf, msg[i + 1].len) < 0)
-				break;
-			i++;
-		} else
-			if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
-					  msg[i].len, NULL, 0) < 0)
-				break;
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-	return i;
-}
-
-static u32 gl861_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static int friio_ext_ctl(struct dvb_usb_adapter *adap,
-			 u32 sat_color, int lnb_on)
-{
-	int i;
-	int ret;
-	struct i2c_msg msg;
-	u8 *buf;
-	u32 mask;
-	u8 lnb = (lnb_on) ? FRIIO_CTL_LNB : 0;
-
-	buf = kmalloc(2, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	msg.addr = 0x00;
-	msg.flags = 0;
-	msg.len = 2;
-	msg.buf = buf;
-
-	buf[0] = 0x00;
-
-	/* send 2bit header (&B10) */
-	buf[1] = lnb | FRIIO_CTL_LED | FRIIO_CTL_STROBE;
-	ret = gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
-	buf[1] |= FRIIO_CTL_CLK;
-	ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
-
-	buf[1] = lnb | FRIIO_CTL_STROBE;
-	ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
-	buf[1] |= FRIIO_CTL_CLK;
-	ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
-
-	/* send 32bit(satur, R, G, B) data in serial */
-	mask = 1 << 31;
-	for (i = 0; i < 32; i++) {
-		buf[1] = lnb | FRIIO_CTL_STROBE;
-		if (sat_color & mask)
-			buf[1] |= FRIIO_CTL_LED;
-		ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
-		buf[1] |= FRIIO_CTL_CLK;
-		ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
-		mask >>= 1;
-	}
-
-	/* set the strobe off */
-	buf[1] = lnb;
-	ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
-	buf[1] |= FRIIO_CTL_CLK;
-	ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
-
-	kfree(buf);
-	return (ret == 70);
-}
-
-
-static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
-
-/* TODO: move these init cmds to the FE's init routine? */
-static u8 streaming_init_cmds[][2] = {
-	{0x33, 0x08},
-	{0x37, 0x40},
-	{0x3A, 0x1F},
-	{0x3B, 0xFF},
-	{0x3C, 0x1F},
-	{0x3D, 0xFF},
-	{0x38, 0x00},
-	{0x35, 0x00},
-	{0x39, 0x00},
-	{0x36, 0x00},
-};
-static int cmdlen = sizeof(streaming_init_cmds) / 2;
-
-/*
- * Command sequence in this init function is a replay
- *  of the captured USB commands from the Windows proprietary driver.
- */
-static int friio_initialize(struct dvb_usb_device *d)
-{
-	int ret;
-	int i;
-	int retry = 0;
-	u8 *rbuf, *wbuf;
-
-	deb_info("%s called.\n", __func__);
-
-	wbuf = kmalloc(3, GFP_KERNEL);
-	if (!wbuf)
-		return -ENOMEM;
-
-	rbuf = kmalloc(2, GFP_KERNEL);
-	if (!rbuf) {
-		kfree(wbuf);
-		return -ENOMEM;
-	}
-
-	/* use gl861_i2c_msg instead of gl861_i2c_xfer(), */
-	/* because the i2c device is not set up yet. */
-	wbuf[0] = 0x11;
-	wbuf[1] = 0x02;
-	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
-	if (ret < 0)
-		goto error;
-	msleep(2);
-
-	wbuf[0] = 0x11;
-	wbuf[1] = 0x00;
-	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
-	if (ret < 0)
-		goto error;
-	msleep(1);
-
-	/* following msgs should be in the FE's init code? */
-	/* cmd sequence to identify the device type? (friio black/white) */
-	wbuf[0] = 0x03;
-	wbuf[1] = 0x80;
-	/* can't use gl861_i2c_cmd, as the register-addr is 16bit(0x0100) */
-	ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
-			      GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE,
-			      0x1200, 0x0100, wbuf, 2, 2000);
-	if (ret < 0)
-		goto error;
-
-	msleep(2);
-	wbuf[0] = 0x00;
-	wbuf[2] = 0x01;		/* reg.0x0100 */
-	wbuf[1] = 0x00;
-	ret = gl861_i2c_msg(d, 0x12 >> 1, wbuf, 3, rbuf, 2);
-	/* my Friio White returns 0xffff. */
-	if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff)
-		goto error;
-
-	msleep(2);
-	wbuf[0] = 0x03;
-	wbuf[1] = 0x80;
-	ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
-			      GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE,
-			      0x9000, 0x0100, wbuf, 2, 2000);
-	if (ret < 0)
-		goto error;
-
-	msleep(2);
-	wbuf[0] = 0x00;
-	wbuf[2] = 0x01;		/* reg.0x0100 */
-	wbuf[1] = 0x00;
-	ret = gl861_i2c_msg(d, 0x90 >> 1, wbuf, 3, rbuf, 2);
-	/* my Friio White returns 0xffff again. */
-	if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff)
-		goto error;
-
-	msleep(1);
-
-restart:
-	/* ============ start DEMOD init cmds ================== */
-	/* read PLL status to clear the POR bit */
-	wbuf[0] = JDVBT90502_2ND_I2C_REG;
-	wbuf[1] = (FRIIO_PLL_ADDR << 1) + 1;	/* +1 for reading */
-	ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, NULL, 0);
-	if (ret < 0)
-		goto error;
-
-	msleep(5);
-	/* note: DEMODULATOR has 16bit register-address. */
-	wbuf[0] = 0x00;
-	wbuf[2] = 0x01;		/* reg addr: 0x0100 */
-	wbuf[1] = 0x00;		/* val: not used */
-	ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 3, rbuf, 1);
-	if (ret < 0)
-		goto error;
-/*
-	msleep(1);
-	wbuf[0] = 0x80;
-	wbuf[1] = 0x00;
-	ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, rbuf, 1);
-	if (ret < 0)
-		goto error;
- */
-	if (rbuf[0] & 0x80) {	/* still in PowerOnReset state? */
-		if (++retry > 3) {
-			deb_info("failed to get the correct"
-				 " FE demod status:0x%02x\n", rbuf[0]);
-			goto error;
-		}
-		msleep(100);
-		goto restart;
-	}
-
-	/* TODO: check return value in rbuf */
-	/* =========== end DEMOD init cmds ===================== */
-	msleep(1);
-
-	wbuf[0] = 0x30;
-	wbuf[1] = 0x04;
-	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
-	if (ret < 0)
-		goto error;
-
-	msleep(2);
-	/* following 2 cmds unnecessary? */
-	wbuf[0] = 0x00;
-	wbuf[1] = 0x01;
-	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
-	if (ret < 0)
-		goto error;
-
-	wbuf[0] = 0x06;
-	wbuf[1] = 0x0F;
-	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
-	if (ret < 0)
-		goto error;
-
-	/* some streaming ctl cmds (maybe) */
-	msleep(10);
-	for (i = 0; i < cmdlen; i++) {
-		ret = gl861_i2c_msg(d, 0x00, streaming_init_cmds[i], 2,
-				    NULL, 0);
-		if (ret < 0)
-			goto error;
-		msleep(1);
-	}
-	msleep(20);
-
-	/* change the LED color etc. */
-	ret = friio_streaming_ctrl(&d->adapter[0], 0);
-	if (ret < 0)
-		goto error;
-
-	return 0;
-
-error:
-	kfree(wbuf);
-	kfree(rbuf);
-	deb_info("%s:ret == %d\n", __func__, ret);
-	return -EIO;
-}
-
-/* Callbacks for DVB USB */
-
-static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	int ret;
-
-	deb_info("%s called.(%d)\n", __func__, onoff);
-
-	/* set the LED color and saturation (and LNB on) */
-	if (onoff)
-		ret = friio_ext_ctl(adap, 0x6400ff64, 1);
-	else
-		ret = friio_ext_ctl(adap, 0x96ff00ff, 1);
-
-	if (ret != 1) {
-		deb_info("%s failed to send cmdx. ret==%d\n", __func__, ret);
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-
-static int friio_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	if (friio_initialize(adap->dev) < 0)
-		return -EIO;
-
-	adap->fe_adap[0].fe = jdvbt90502_attach(adap->dev);
-	if (adap->fe_adap[0].fe == NULL)
-		return -EIO;
-
-	return 0;
-}
-
-/* DVB USB Driver stuff */
-static struct dvb_usb_device_properties friio_properties;
-
-static int friio_probe(struct usb_interface *intf,
-		       const struct usb_device_id *id)
-{
-	struct dvb_usb_device *d;
-	struct usb_host_interface *alt;
-	int ret;
-
-	if (intf->num_altsetting < GL861_ALTSETTING_COUNT)
-		return -ENODEV;
-
-	alt = usb_altnum_to_altsetting(intf, FRIIO_BULK_ALTSETTING);
-	if (alt == NULL) {
-		deb_rc("not alt found!\n");
-		return -ENODEV;
-	}
-	ret = usb_set_interface(interface_to_usbdev(intf),
-				alt->desc.bInterfaceNumber,
-				alt->desc.bAlternateSetting);
-	if (ret != 0) {
-		deb_rc("failed to set alt-setting!\n");
-		return ret;
-	}
-
-	ret = dvb_usb_device_init(intf, &friio_properties,
-				  THIS_MODULE, &d, adapter_nr);
-	if (ret == 0)
-		friio_streaming_ctrl(&d->adapter[0], 1);
-
-	return ret;
-}
-
-
-struct jdvbt90502_config friio_fe_config = {
-	.demod_address = FRIIO_DEMOD_ADDR,
-	.pll_address = FRIIO_PLL_ADDR,
-};
-
-static struct i2c_algorithm gl861_i2c_algo = {
-	.master_xfer   = gl861_i2c_xfer,
-	.functionality = gl861_i2c_func,
-};
-
-static struct usb_device_id friio_table[] = {
-	{ USB_DEVICE(USB_VID_774, USB_PID_FRIIO_WHITE) },
-	{ }		/* Terminating entry */
-};
-MODULE_DEVICE_TABLE(usb, friio_table);
-
-
-static struct dvb_usb_device_properties friio_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-	.usb_ctrl = DEVICE_SPECIFIC,
-
-	.size_of_priv = 0,
-
-	.num_adapters = 1,
-	.adapter = {
-		/* caps:0 =>  no pid filter, 188B TS packet */
-		/* GL861 has a HW pid filter, but no info available. */
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.caps  = 0,
-
-			.frontend_attach  = friio_frontend_attach,
-			.streaming_ctrl = friio_streaming_ctrl,
-
-			.stream = {
-				.type = USB_BULK,
-				/* count <= MAX_NO_URBS_FOR_DATA_STREAM(10) */
-				.count = 8,
-				.endpoint = 0x01,
-				.u = {
-					/* GL861 has 6KB buf inside */
-					.bulk = {
-						.buffersize = 16384,
-					}
-				}
-			},
-		}},
-		}
-	},
-	.i2c_algo = &gl861_i2c_algo,
-
-	.num_device_descs = 1,
-	.devices = {
-		{
-			.name = "774 Friio ISDB-T USB2.0",
-			.cold_ids = { NULL },
-			.warm_ids = { &friio_table[0], NULL },
-		},
-	}
-};
-
-static struct usb_driver friio_driver = {
-	.name		= "dvb_usb_friio",
-	.probe		= friio_probe,
-	.disconnect	= dvb_usb_device_exit,
-	.id_table	= friio_table,
-};
-
-module_usb_driver(friio_driver);
-
-MODULE_AUTHOR("Akihiro Tsukada <tskd2@yahoo.co.jp>");
-MODULE_DESCRIPTION("Driver for Friio ISDB-T USB2.0 Receiver");
-MODULE_VERSION("0.2");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/friio.h b/drivers/media/dvb/dvb-usb/friio.h
deleted file mode 100644
index 0f461ca..0000000
--- a/drivers/media/dvb/dvb-usb/friio.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
- *
- * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
- *
- * This module is based off the the gl861 and vp702x modules.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#ifndef _DVB_USB_FRIIO_H_
-#define _DVB_USB_FRIIO_H_
-
-/**
- *      Friio Components
- *       USB hub:                                AU4254
- *         USB controller(+ TS dmx & streaming): GL861
- *         Frontend:                             comtech JDVBT-90502
- *             (tuner PLL:                       tua6034, I2C addr:(0xC0 >> 1))
- *             (OFDM demodulator:                TC90502, I2C addr:(0x30 >> 1))
- *         LED x3 (+LNB) control:                PIC 16F676
- *         EEPROM:                               24C08
- *
- *        (USB smart card reader:                AU9522)
- *
- */
-
-#define DVB_USB_LOG_PREFIX "friio"
-#include "dvb-usb.h"
-
-extern int dvb_usb_friio_debug;
-#define deb_info(args...) dprintk(dvb_usb_friio_debug, 0x01, args)
-#define deb_xfer(args...) dprintk(dvb_usb_friio_debug, 0x02, args)
-#define deb_rc(args...)   dprintk(dvb_usb_friio_debug, 0x04, args)
-#define deb_fe(args...)   dprintk(dvb_usb_friio_debug, 0x08, args)
-
-/* Vendor requests */
-#define GL861_WRITE		0x40
-#define GL861_READ		0xc0
-
-/* command bytes */
-#define GL861_REQ_I2C_WRITE	0x01
-#define GL861_REQ_I2C_READ	0x02
-/* For control msg with data argument */
-/* Used for accessing the PLL on the secondary I2C bus of FE via GL861 */
-#define GL861_REQ_I2C_DATA_CTRL_WRITE	0x03
-
-#define GL861_ALTSETTING_COUNT	2
-#define FRIIO_BULK_ALTSETTING	0
-#define FRIIO_ISOC_ALTSETTING	1
-
-/* LED & LNB control via PIC. */
-/* basically, it's serial control with clock and strobe. */
-/* write the below 4bit control data to the reg 0x00 at the I2C addr 0x00 */
-/* when controlling the LEDs, 32bit(saturation, R, G, B) is sent on the bit3*/
-#define FRIIO_CTL_LNB (1 << 0)
-#define FRIIO_CTL_STROBE (1 << 1)
-#define FRIIO_CTL_CLK (1 << 2)
-#define FRIIO_CTL_LED (1 << 3)
-
-/* Front End related */
-
-#define FRIIO_DEMOD_ADDR  (0x30 >> 1)
-#define FRIIO_PLL_ADDR  (0xC0 >> 1)
-
-#define JDVBT90502_PLL_CLK	4000000
-#define JDVBT90502_PLL_DIVIDER	28
-
-#define JDVBT90502_2ND_I2C_REG 0xFE
-
-/* byte index for pll i2c command data structure*/
-/* see datasheet for tua6034 */
-#define DEMOD_REDIRECT_REG 0
-#define ADDRESS_BYTE       1
-#define DIVIDER_BYTE1      2
-#define DIVIDER_BYTE2      3
-#define CONTROL_BYTE       4
-#define BANDSWITCH_BYTE    5
-#define AGC_CTRL_BYTE      5
-#define PLL_CMD_LEN        6
-
-/* bit masks for PLL STATUS response */
-#define PLL_STATUS_POR_MODE   0x80 /* 1: Power on Reset (test) Mode */
-#define PLL_STATUS_LOCKED     0x40 /* 1: locked */
-#define PLL_STATUS_AGC_ACTIVE 0x08 /* 1:active */
-#define PLL_STATUS_TESTMODE   0x07 /* digital output level (5 level) */
-  /* 0.15Vcc step   0x00: < 0.15Vcc, ..., 0x04: >= 0.6Vcc (<= 1Vcc) */
-
-
-struct jdvbt90502_config {
-	u8 demod_address; /* i2c addr for demodulator IC */
-	u8 pll_address;   /* PLL addr on the secondary i2c*/
-};
-extern struct jdvbt90502_config friio_fe_config;
-
-extern struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d);
-#endif
diff --git a/drivers/media/dvb/dvb-usb/gl861.c b/drivers/media/dvb/dvb-usb/gl861.c
deleted file mode 100644
index c1f5582..0000000
--- a/drivers/media/dvb/dvb-usb/gl861.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/* DVB USB compliant linux driver for GL861 USB2.0 devices.
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the
- *	Free Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "gl861.h"
-
-#include "zl10353.h"
-#include "qt1010.h"
-
-/* debug */
-static int dvb_usb_gl861_debug;
-module_param_named(debug, dvb_usb_gl861_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))."
-	DVB_USB_DEBUG_STATUS);
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
-			 u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
-{
-	u16 index;
-	u16 value = addr << (8 + 1);
-	int wo = (rbuf == NULL || rlen == 0); /* write-only */
-	u8 req, type;
-
-	if (wo) {
-		req = GL861_REQ_I2C_WRITE;
-		type = GL861_WRITE;
-	} else { /* rw */
-		req = GL861_REQ_I2C_READ;
-		type = GL861_READ;
-	}
-
-	switch (wlen) {
-	case 1:
-		index = wbuf[0];
-		break;
-	case 2:
-		index = wbuf[0];
-		value = value + wbuf[1];
-		break;
-	default:
-		warn("wlen = %x, aborting.", wlen);
-		return -EINVAL;
-	}
-
-	msleep(1); /* avoid I2C errors */
-
-	return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), req, type,
-			       value, index, rbuf, rlen, 2000);
-}
-
-/* I2C */
-static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
-			  int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	int i;
-
-	if (num > 2)
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	for (i = 0; i < num; i++) {
-		/* write/read request */
-		if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
-			if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
-				msg[i].len, msg[i+1].buf, msg[i+1].len) < 0)
-				break;
-			i++;
-		} else
-			if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
-					  msg[i].len, NULL, 0) < 0)
-				break;
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-	return i;
-}
-
-static u32 gl861_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm gl861_i2c_algo = {
-	.master_xfer   = gl861_i2c_xfer,
-	.functionality = gl861_i2c_func,
-};
-
-/* Callbacks for DVB USB */
-static struct zl10353_config gl861_zl10353_config = {
-	.demod_address = 0x0f,
-	.no_tuner = 1,
-	.parallel_ts = 1,
-};
-
-static int gl861_frontend_attach(struct dvb_usb_adapter *adap)
-{
-
-	adap->fe_adap[0].fe = dvb_attach(zl10353_attach, &gl861_zl10353_config,
-		&adap->dev->i2c_adap);
-	if (adap->fe_adap[0].fe == NULL)
-		return -EIO;
-
-	return 0;
-}
-
-static struct qt1010_config gl861_qt1010_config = {
-	.i2c_address = 0x62
-};
-
-static int gl861_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	return dvb_attach(qt1010_attach,
-			  adap->fe_adap[0].fe, &adap->dev->i2c_adap,
-			  &gl861_qt1010_config) == NULL ? -ENODEV : 0;
-}
-
-/* DVB USB Driver stuff */
-static struct dvb_usb_device_properties gl861_properties;
-
-static int gl861_probe(struct usb_interface *intf,
-		       const struct usb_device_id *id)
-{
-	struct dvb_usb_device *d;
-	struct usb_host_interface *alt;
-	int ret;
-
-	if (intf->num_altsetting < 2)
-		return -ENODEV;
-
-	ret = dvb_usb_device_init(intf, &gl861_properties, THIS_MODULE, &d,
-				  adapter_nr);
-	if (ret == 0) {
-		alt = usb_altnum_to_altsetting(intf, 0);
-
-		if (alt == NULL) {
-			deb_rc("not alt found!\n");
-			return -ENODEV;
-		}
-
-		ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber,
-					alt->desc.bAlternateSetting);
-	}
-
-	return ret;
-}
-
-static struct usb_device_id gl861_table [] = {
-		{ USB_DEVICE(USB_VID_MSI, USB_PID_MSI_MEGASKY580_55801) },
-		{ USB_DEVICE(USB_VID_ALINK, USB_VID_ALINK_DTU) },
-		{ }		/* Terminating entry */
-};
-MODULE_DEVICE_TABLE(usb, gl861_table);
-
-static struct dvb_usb_device_properties gl861_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-	.usb_ctrl = DEVICE_SPECIFIC,
-
-	.size_of_priv     = 0,
-
-	.num_adapters = 1,
-	.adapter = {{
-		.num_frontends = 1,
-		.fe = {{
-
-		.frontend_attach  = gl861_frontend_attach,
-		.tuner_attach     = gl861_tuner_attach,
-
-		.stream = {
-			.type = USB_BULK,
-			.count = 7,
-			.endpoint = 0x81,
-			.u = {
-				.bulk = {
-					.buffersize = 512,
-				}
-			}
-		},
-		}},
-	} },
-	.i2c_algo         = &gl861_i2c_algo,
-
-	.num_device_descs = 2,
-	.devices = {
-		{
-			.name = "MSI Mega Sky 55801 DVB-T USB2.0",
-			.cold_ids = { NULL },
-			.warm_ids = { &gl861_table[0], NULL },
-		},
-		{
-			.name = "A-LINK DTU DVB-T USB2.0",
-			.cold_ids = { NULL },
-			.warm_ids = { &gl861_table[1], NULL },
-		},
-	}
-};
-
-static struct usb_driver gl861_driver = {
-	.name		= "dvb_usb_gl861",
-	.probe		= gl861_probe,
-	.disconnect	= dvb_usb_device_exit,
-	.id_table	= gl861_table,
-};
-
-module_usb_driver(gl861_driver);
-
-MODULE_AUTHOR("Carl Lundqvist <comabug@gmail.com>");
-MODULE_DESCRIPTION("Driver MSI Mega Sky 580 DVB-T USB2.0 / GL861");
-MODULE_VERSION("0.1");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/gl861.h b/drivers/media/dvb/dvb-usb/gl861.h
deleted file mode 100644
index c54855e..0000000
--- a/drivers/media/dvb/dvb-usb/gl861.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _DVB_USB_GL861_H_
-#define _DVB_USB_GL861_H_
-
-#define DVB_USB_LOG_PREFIX "gl861"
-#include "dvb-usb.h"
-
-#define deb_rc(args...)   dprintk(dvb_usb_gl861_debug, 0x01, args)
-
-#define GL861_WRITE		0x40
-#define GL861_READ		0xc0
-
-#define GL861_REQ_I2C_WRITE	0x01
-#define GL861_REQ_I2C_READ	0x02
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/gp8psk-fe.c b/drivers/media/dvb/dvb-usb/gp8psk-fe.c
deleted file mode 100644
index 67957dd..0000000
--- a/drivers/media/dvb/dvb-usb/gp8psk-fe.c
+++ /dev/null
@@ -1,369 +0,0 @@
-/* DVB USB compliant Linux driver for the
- *  - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module
- *
- * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com)
- * Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com)
- *
- * Thanks to GENPIX for the sample code used to implement this module.
- *
- * This module is based off the vp7045 and vp702x modules
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "gp8psk.h"
-
-struct gp8psk_fe_state {
-	struct dvb_frontend fe;
-	struct dvb_usb_device *d;
-	u8 lock;
-	u16 snr;
-	unsigned long next_status_check;
-	unsigned long status_check_interval;
-};
-
-static int gp8psk_tuned_to_DCII(struct dvb_frontend *fe)
-{
-	struct gp8psk_fe_state *st = fe->demodulator_priv;
-	u8 status;
-	gp8psk_usb_in_op(st->d, GET_8PSK_CONFIG, 0, 0, &status, 1);
-	return status & bmDCtuned;
-}
-
-static int gp8psk_set_tuner_mode(struct dvb_frontend *fe, int mode)
-{
-	struct gp8psk_fe_state *state = fe->demodulator_priv;
-	return gp8psk_usb_out_op(state->d, SET_8PSK_CONFIG, mode, 0, NULL, 0);
-}
-
-static int gp8psk_fe_update_status(struct gp8psk_fe_state *st)
-{
-	u8 buf[6];
-	if (time_after(jiffies,st->next_status_check)) {
-		gp8psk_usb_in_op(st->d, GET_SIGNAL_LOCK, 0,0,&st->lock,1);
-		gp8psk_usb_in_op(st->d, GET_SIGNAL_STRENGTH, 0,0,buf,6);
-		st->snr = (buf[1]) << 8 | buf[0];
-		st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000;
-	}
-	return 0;
-}
-
-static int gp8psk_fe_read_status(struct dvb_frontend* fe, fe_status_t *status)
-{
-	struct gp8psk_fe_state *st = fe->demodulator_priv;
-	gp8psk_fe_update_status(st);
-
-	if (st->lock)
-		*status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_SIGNAL | FE_HAS_CARRIER;
-	else
-		*status = 0;
-
-	if (*status & FE_HAS_LOCK)
-		st->status_check_interval = 1000;
-	else
-		st->status_check_interval = 100;
-	return 0;
-}
-
-/* not supported by this Frontend */
-static int gp8psk_fe_read_ber(struct dvb_frontend* fe, u32 *ber)
-{
-	(void) fe;
-	*ber = 0;
-	return 0;
-}
-
-/* not supported by this Frontend */
-static int gp8psk_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
-{
-	(void) fe;
-	*unc = 0;
-	return 0;
-}
-
-static int gp8psk_fe_read_snr(struct dvb_frontend* fe, u16 *snr)
-{
-	struct gp8psk_fe_state *st = fe->demodulator_priv;
-	gp8psk_fe_update_status(st);
-	/* snr is reported in dBu*256 */
-	*snr = st->snr;
-	return 0;
-}
-
-static int gp8psk_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
-{
-	struct gp8psk_fe_state *st = fe->demodulator_priv;
-	gp8psk_fe_update_status(st);
-	/* snr is reported in dBu*256 */
-	/* snr / 38.4 ~= 100% strength */
-	/* snr * 17 returns 100% strength as 65535 */
-	if (st->snr > 0xf00)
-		*strength = 0xffff;
-	else
-		*strength = (st->snr << 4) + st->snr; /* snr*17 */
-	return 0;
-}
-
-static int gp8psk_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
-{
-	tune->min_delay_ms = 800;
-	return 0;
-}
-
-static int gp8psk_fe_set_frontend(struct dvb_frontend *fe)
-{
-	struct gp8psk_fe_state *state = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	u8 cmd[10];
-	u32 freq = c->frequency * 1000;
-	int gp_product_id = le16_to_cpu(state->d->udev->descriptor.idProduct);
-
-	deb_fe("%s()\n", __func__);
-
-	cmd[4] = freq         & 0xff;
-	cmd[5] = (freq >> 8)  & 0xff;
-	cmd[6] = (freq >> 16) & 0xff;
-	cmd[7] = (freq >> 24) & 0xff;
-
-	/* backwards compatibility: DVB-S + 8-PSK were used for Turbo-FEC */
-	if (c->delivery_system == SYS_DVBS && c->modulation == PSK_8)
-		c->delivery_system = SYS_TURBO;
-
-	switch (c->delivery_system) {
-	case SYS_DVBS:
-		if (c->modulation != QPSK) {
-			deb_fe("%s: unsupported modulation selected (%d)\n",
-				__func__, c->modulation);
-			return -EOPNOTSUPP;
-		}
-		c->fec_inner = FEC_AUTO;
-		break;
-	case SYS_DVBS2: /* kept for backwards compatibility */
-		deb_fe("%s: DVB-S2 delivery system selected\n", __func__);
-		break;
-	case SYS_TURBO:
-		deb_fe("%s: Turbo-FEC delivery system selected\n", __func__);
-		break;
-
-	default:
-		deb_fe("%s: unsupported delivery system selected (%d)\n",
-			__func__, c->delivery_system);
-		return -EOPNOTSUPP;
-	}
-
-	cmd[0] =  c->symbol_rate        & 0xff;
-	cmd[1] = (c->symbol_rate >>  8) & 0xff;
-	cmd[2] = (c->symbol_rate >> 16) & 0xff;
-	cmd[3] = (c->symbol_rate >> 24) & 0xff;
-	switch (c->modulation) {
-	case QPSK:
-		if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
-			if (gp8psk_tuned_to_DCII(fe))
-				gp8psk_bcm4500_reload(state->d);
-		switch (c->fec_inner) {
-		case FEC_1_2:
-			cmd[9] = 0; break;
-		case FEC_2_3:
-			cmd[9] = 1; break;
-		case FEC_3_4:
-			cmd[9] = 2; break;
-		case FEC_5_6:
-			cmd[9] = 3; break;
-		case FEC_7_8:
-			cmd[9] = 4; break;
-		case FEC_AUTO:
-			cmd[9] = 5; break;
-		default:
-			cmd[9] = 5; break;
-		}
-		if (c->delivery_system == SYS_TURBO)
-			cmd[8] = ADV_MOD_TURBO_QPSK;
-		else
-			cmd[8] = ADV_MOD_DVB_QPSK;
-		break;
-	case PSK_8: /* PSK_8 is for compatibility with DN */
-		cmd[8] = ADV_MOD_TURBO_8PSK;
-		switch (c->fec_inner) {
-		case FEC_2_3:
-			cmd[9] = 0; break;
-		case FEC_3_4:
-			cmd[9] = 1; break;
-		case FEC_3_5:
-			cmd[9] = 2; break;
-		case FEC_5_6:
-			cmd[9] = 3; break;
-		case FEC_8_9:
-			cmd[9] = 4; break;
-		default:
-			cmd[9] = 0; break;
-		}
-		break;
-	case QAM_16: /* QAM_16 is for compatibility with DN */
-		cmd[8] = ADV_MOD_TURBO_16QAM;
-		cmd[9] = 0;
-		break;
-	default: /* Unknown modulation */
-		deb_fe("%s: unsupported modulation selected (%d)\n",
-			__func__, c->modulation);
-		return -EOPNOTSUPP;
-	}
-
-	if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
-		gp8psk_set_tuner_mode(fe, 0);
-	gp8psk_usb_out_op(state->d, TUNE_8PSK, 0, 0, cmd, 10);
-
-	state->lock = 0;
-	state->next_status_check = jiffies;
-	state->status_check_interval = 200;
-
-	return 0;
-}
-
-static int gp8psk_fe_send_diseqc_msg (struct dvb_frontend* fe,
-				    struct dvb_diseqc_master_cmd *m)
-{
-	struct gp8psk_fe_state *st = fe->demodulator_priv;
-
-	deb_fe("%s\n",__func__);
-
-	if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, m->msg[0], 0,
-			m->msg, m->msg_len)) {
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int gp8psk_fe_send_diseqc_burst (struct dvb_frontend* fe,
-				    fe_sec_mini_cmd_t burst)
-{
-	struct gp8psk_fe_state *st = fe->demodulator_priv;
-	u8 cmd;
-
-	deb_fe("%s\n",__func__);
-
-	/* These commands are certainly wrong */
-	cmd = (burst == SEC_MINI_A) ? 0x00 : 0x01;
-
-	if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, cmd, 0,
-			&cmd, 0)) {
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int gp8psk_fe_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
-{
-	struct gp8psk_fe_state* state = fe->demodulator_priv;
-
-	if (gp8psk_usb_out_op(state->d,SET_22KHZ_TONE,
-		 (tone == SEC_TONE_ON), 0, NULL, 0)) {
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int gp8psk_fe_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
-{
-	struct gp8psk_fe_state* state = fe->demodulator_priv;
-
-	if (gp8psk_usb_out_op(state->d,SET_LNB_VOLTAGE,
-			 voltage == SEC_VOLTAGE_18, 0, NULL, 0)) {
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int gp8psk_fe_enable_high_lnb_voltage(struct dvb_frontend* fe, long onoff)
-{
-	struct gp8psk_fe_state* state = fe->demodulator_priv;
-	return gp8psk_usb_out_op(state->d, USE_EXTRA_VOLT, onoff, 0,NULL,0);
-}
-
-static int gp8psk_fe_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long sw_cmd)
-{
-	struct gp8psk_fe_state* state = fe->demodulator_priv;
-	u8 cmd = sw_cmd & 0x7f;
-
-	if (gp8psk_usb_out_op(state->d,SET_DN_SWITCH, cmd, 0,
-			NULL, 0)) {
-		return -EINVAL;
-	}
-	if (gp8psk_usb_out_op(state->d,SET_LNB_VOLTAGE, !!(sw_cmd & 0x80),
-			0, NULL, 0)) {
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static void gp8psk_fe_release(struct dvb_frontend* fe)
-{
-	struct gp8psk_fe_state *state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops gp8psk_fe_ops;
-
-struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d)
-{
-	struct gp8psk_fe_state *s = kzalloc(sizeof(struct gp8psk_fe_state), GFP_KERNEL);
-	if (s == NULL)
-		goto error;
-
-	s->d = d;
-	memcpy(&s->fe.ops, &gp8psk_fe_ops, sizeof(struct dvb_frontend_ops));
-	s->fe.demodulator_priv = s;
-
-	goto success;
-error:
-	return NULL;
-success:
-	return &s->fe;
-}
-
-
-static struct dvb_frontend_ops gp8psk_fe_ops = {
-	.delsys = { SYS_DVBS },
-	.info = {
-		.name			= "Genpix DVB-S",
-		.frequency_min		= 800000,
-		.frequency_max		= 2250000,
-		.frequency_stepsize	= 100,
-		.symbol_rate_min        = 1000000,
-		.symbol_rate_max        = 45000000,
-		.symbol_rate_tolerance  = 500,  /* ppm */
-		.caps = FE_CAN_INVERSION_AUTO |
-			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			/*
-			 * FE_CAN_QAM_16 is for compatibility
-			 * (Myth incorrectly detects Turbo-QPSK as plain QAM-16)
-			 */
-			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_TURBO_FEC
-	},
-
-	.release = gp8psk_fe_release,
-
-	.init = NULL,
-	.sleep = NULL,
-
-	.set_frontend = gp8psk_fe_set_frontend,
-
-	.get_tune_settings = gp8psk_fe_get_tune_settings,
-
-	.read_status = gp8psk_fe_read_status,
-	.read_ber = gp8psk_fe_read_ber,
-	.read_signal_strength = gp8psk_fe_read_signal_strength,
-	.read_snr = gp8psk_fe_read_snr,
-	.read_ucblocks = gp8psk_fe_read_unc_blocks,
-
-	.diseqc_send_master_cmd = gp8psk_fe_send_diseqc_msg,
-	.diseqc_send_burst = gp8psk_fe_send_diseqc_burst,
-	.set_tone = gp8psk_fe_set_tone,
-	.set_voltage = gp8psk_fe_set_voltage,
-	.dishnetwork_send_legacy_command = gp8psk_fe_send_legacy_dish_cmd,
-	.enable_high_lnb_voltage = gp8psk_fe_enable_high_lnb_voltage
-};
diff --git a/drivers/media/dvb/dvb-usb/gp8psk.c b/drivers/media/dvb/dvb-usb/gp8psk.c
deleted file mode 100644
index 5d0384d..0000000
--- a/drivers/media/dvb/dvb-usb/gp8psk.c
+++ /dev/null
@@ -1,328 +0,0 @@
-/* DVB USB compliant Linux driver for the
- *  - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module
- *
- * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com)
- * Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com)
- *
- * Thanks to GENPIX for the sample code used to implement this module.
- *
- * This module is based off the vp7045 and vp702x modules
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "gp8psk.h"
-
-/* debug */
-static char bcm4500_firmware[] = "dvb-usb-gp8psk-02.fw";
-int dvb_usb_gp8psk_debug;
-module_param_named(debug,dvb_usb_gp8psk_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS);
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static int gp8psk_get_fw_version(struct dvb_usb_device *d, u8 *fw_vers)
-{
-	return (gp8psk_usb_in_op(d, GET_FW_VERS, 0, 0, fw_vers, 6));
-}
-
-static int gp8psk_get_fpga_version(struct dvb_usb_device *d, u8 *fpga_vers)
-{
-	return (gp8psk_usb_in_op(d, GET_FPGA_VERS, 0, 0, fpga_vers, 1));
-}
-
-static void gp8psk_info(struct dvb_usb_device *d)
-{
-	u8 fpga_vers, fw_vers[6];
-
-	if (!gp8psk_get_fw_version(d, fw_vers))
-		info("FW Version = %i.%02i.%i (0x%x)  Build %4i/%02i/%02i",
-		fw_vers[2], fw_vers[1], fw_vers[0], GP8PSK_FW_VERS(fw_vers),
-		2000 + fw_vers[5], fw_vers[4], fw_vers[3]);
-	else
-		info("failed to get FW version");
-
-	if (!gp8psk_get_fpga_version(d, &fpga_vers))
-		info("FPGA Version = %i", fpga_vers);
-	else
-		info("failed to get FPGA version");
-}
-
-int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
-{
-	int ret = 0,try = 0;
-
-	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
-		return ret;
-
-	while (ret >= 0 && ret != blen && try < 3) {
-		ret = usb_control_msg(d->udev,
-			usb_rcvctrlpipe(d->udev,0),
-			req,
-			USB_TYPE_VENDOR | USB_DIR_IN,
-			value,index,b,blen,
-			2000);
-		deb_info("reading number %d (ret: %d)\n",try,ret);
-		try++;
-	}
-
-	if (ret < 0 || ret != blen) {
-		warn("usb in %d operation failed.", req);
-		ret = -EIO;
-	} else
-		ret = 0;
-
-	deb_xfer("in: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
-	debug_dump(b,blen,deb_xfer);
-
-	mutex_unlock(&d->usb_mutex);
-
-	return ret;
-}
-
-int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
-			     u16 index, u8 *b, int blen)
-{
-	int ret;
-
-	deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
-	debug_dump(b,blen,deb_xfer);
-
-	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
-		return ret;
-
-	if (usb_control_msg(d->udev,
-			usb_sndctrlpipe(d->udev,0),
-			req,
-			USB_TYPE_VENDOR | USB_DIR_OUT,
-			value,index,b,blen,
-			2000) != blen) {
-		warn("usb out operation failed.");
-		ret = -EIO;
-	} else
-		ret = 0;
-	mutex_unlock(&d->usb_mutex);
-
-	return ret;
-}
-
-static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d)
-{
-	int ret;
-	const struct firmware *fw = NULL;
-	const u8 *ptr;
-	u8 *buf;
-	if ((ret = request_firmware(&fw, bcm4500_firmware,
-					&d->udev->dev)) != 0) {
-		err("did not find the bcm4500 firmware file. (%s) "
-			"Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)",
-			bcm4500_firmware,ret);
-		return ret;
-	}
-
-	ret = -EINVAL;
-
-	if (gp8psk_usb_out_op(d, LOAD_BCM4500,1,0,NULL, 0))
-		goto out_rel_fw;
-
-	info("downloading bcm4500 firmware from file '%s'",bcm4500_firmware);
-
-	ptr = fw->data;
-	buf = kmalloc(64, GFP_KERNEL | GFP_DMA);
-	if (!buf) {
-		ret = -ENOMEM;
-		goto out_rel_fw;
-	}
-
-	while (ptr[0] != 0xff) {
-		u16 buflen = ptr[0] + 4;
-		if (ptr + buflen >= fw->data + fw->size) {
-			err("failed to load bcm4500 firmware.");
-			goto out_free;
-		}
-		memcpy(buf, ptr, buflen);
-		if (dvb_usb_generic_write(d, buf, buflen)) {
-			err("failed to load bcm4500 firmware.");
-			goto out_free;
-		}
-		ptr += buflen;
-	}
-
-	ret = 0;
-
-out_free:
-	kfree(buf);
-out_rel_fw:
-	release_firmware(fw);
-
-	return ret;
-}
-
-static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	u8 status, buf;
-	int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct);
-
-	if (onoff) {
-		gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1);
-		if (! (status & bm8pskStarted)) {  /* started */
-			if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K)
-				gp8psk_usb_out_op(d, CW3K_INIT, 1, 0, NULL, 0);
-			if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))
-				return -EINVAL;
-			gp8psk_info(d);
-		}
-
-		if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
-			if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */
-				if(gp8psk_load_bcm4500fw(d))
-					return -EINVAL;
-
-		if (! (status & bmIntersilOn)) /* LNB Power */
-			if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0,
-					&buf, 1))
-				return -EINVAL;
-
-		/* Set DVB mode to 1 */
-		if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
-			if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0))
-				return -EINVAL;
-		/* Abort possible TS (if previous tune crashed) */
-		if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0))
-			return -EINVAL;
-	} else {
-		/* Turn off LNB power */
-		if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1))
-			return -EINVAL;
-		/* Turn off 8psk power */
-		if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
-			return -EINVAL;
-		if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K)
-			gp8psk_usb_out_op(d, CW3K_INIT, 0, 0, NULL, 0);
-	}
-	return 0;
-}
-
-int gp8psk_bcm4500_reload(struct dvb_usb_device *d)
-{
-	u8 buf;
-	int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct);
-	/* Turn off 8psk power */
-	if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
-		return -EINVAL;
-	/* Turn On 8psk power */
-	if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))
-		return -EINVAL;
-	/* load BCM4500 firmware */
-	if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
-		if (gp8psk_load_bcm4500fw(d))
-			return -EINVAL;
-	return 0;
-}
-
-static int gp8psk_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	return gp8psk_usb_out_op(adap->dev, ARM_TRANSFER, onoff, 0 , NULL, 0);
-}
-
-static int gp8psk_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	adap->fe_adap[0].fe = gp8psk_fe_attach(adap->dev);
-	return 0;
-}
-
-static struct dvb_usb_device_properties gp8psk_properties;
-
-static int gp8psk_usb_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	int ret;
-	struct usb_device *udev = interface_to_usbdev(intf);
-	ret = dvb_usb_device_init(intf, &gp8psk_properties,
-				  THIS_MODULE, NULL, adapter_nr);
-	if (ret == 0) {
-		info("found Genpix USB device pID = %x (hex)",
-			le16_to_cpu(udev->descriptor.idProduct));
-	}
-	return ret;
-}
-
-static struct usb_device_id gp8psk_usb_table [] = {
-	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_COLD) },
-	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_WARM) },
-	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_2) },
-	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_1) },
-	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_2) },
-/*	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_CW3K) }, */
-	    { 0 },
-};
-MODULE_DEVICE_TABLE(usb, gp8psk_usb_table);
-
-static struct dvb_usb_device_properties gp8psk_properties = {
-	.usb_ctrl = CYPRESS_FX2,
-	.firmware = "dvb-usb-gp8psk-01.fw",
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = gp8psk_streaming_ctrl,
-			.frontend_attach  = gp8psk_frontend_attach,
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 7,
-				.endpoint = 0x82,
-				.u = {
-					.bulk = {
-						.buffersize = 8192,
-					}
-				}
-			},
-		}},
-		}
-	},
-	.power_ctrl       = gp8psk_power_ctrl,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 4,
-	.devices = {
-		{ .name = "Genpix 8PSK-to-USB2 Rev.1 DVB-S receiver",
-		  .cold_ids = { &gp8psk_usb_table[0], NULL },
-		  .warm_ids = { &gp8psk_usb_table[1], NULL },
-		},
-		{ .name = "Genpix 8PSK-to-USB2 Rev.2 DVB-S receiver",
-		  .cold_ids = { NULL },
-		  .warm_ids = { &gp8psk_usb_table[2], NULL },
-		},
-		{ .name = "Genpix SkyWalker-1 DVB-S receiver",
-		  .cold_ids = { NULL },
-		  .warm_ids = { &gp8psk_usb_table[3], NULL },
-		},
-		{ .name = "Genpix SkyWalker-2 DVB-S receiver",
-		  .cold_ids = { NULL },
-		  .warm_ids = { &gp8psk_usb_table[4], NULL },
-		},
-		{ NULL },
-	}
-};
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver gp8psk_usb_driver = {
-	.name		= "dvb_usb_gp8psk",
-	.probe		= gp8psk_usb_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table	= gp8psk_usb_table,
-};
-
-module_usb_driver(gp8psk_usb_driver);
-
-MODULE_AUTHOR("Alan Nisota <alannisota@gamil.com>");
-MODULE_DESCRIPTION("Driver for Genpix DVB-S");
-MODULE_VERSION("1.1");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/gp8psk.h b/drivers/media/dvb/dvb-usb/gp8psk.h
deleted file mode 100644
index ed32b9d..0000000
--- a/drivers/media/dvb/dvb-usb/gp8psk.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* DVB USB compliant Linux driver for the
- *  - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module
- *
- * Copyright (C) 2006 Alan Nisota (alannisota@gmail.com)
- * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com)
- *
- * Thanks to GENPIX for the sample code used to implement this module.
- *
- * This module is based off the vp7045 and vp702x modules
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#ifndef _DVB_USB_GP8PSK_H_
-#define _DVB_USB_GP8PSK_H_
-
-#define DVB_USB_LOG_PREFIX "gp8psk"
-#include "dvb-usb.h"
-
-extern int dvb_usb_gp8psk_debug;
-#define deb_info(args...) dprintk(dvb_usb_gp8psk_debug,0x01,args)
-#define deb_xfer(args...) dprintk(dvb_usb_gp8psk_debug,0x02,args)
-#define deb_rc(args...)   dprintk(dvb_usb_gp8psk_debug,0x04,args)
-#define deb_fe(args...)   dprintk(dvb_usb_gp8psk_debug,0x08,args)
-
-/* Twinhan Vendor requests */
-#define TH_COMMAND_IN                     0xC0
-#define TH_COMMAND_OUT                    0xC1
-
-/* gp8psk commands */
-
-#define GET_8PSK_CONFIG                 0x80    /* in */
-#define SET_8PSK_CONFIG                 0x81
-#define I2C_WRITE			0x83
-#define I2C_READ			0x84
-#define ARM_TRANSFER                    0x85
-#define TUNE_8PSK                       0x86
-#define GET_SIGNAL_STRENGTH             0x87    /* in */
-#define LOAD_BCM4500                    0x88
-#define BOOT_8PSK                       0x89    /* in */
-#define START_INTERSIL                  0x8A    /* in */
-#define SET_LNB_VOLTAGE                 0x8B
-#define SET_22KHZ_TONE                  0x8C
-#define SEND_DISEQC_COMMAND             0x8D
-#define SET_DVB_MODE                    0x8E
-#define SET_DN_SWITCH                   0x8F
-#define GET_SIGNAL_LOCK                 0x90    /* in */
-#define GET_FW_VERS			0x92
-#define GET_SERIAL_NUMBER               0x93    /* in */
-#define USE_EXTRA_VOLT                  0x94
-#define GET_FPGA_VERS			0x95
-#define CW3K_INIT			0x9d
-
-/* PSK_configuration bits */
-#define bm8pskStarted                   0x01
-#define bm8pskFW_Loaded                 0x02
-#define bmIntersilOn                    0x04
-#define bmDVBmode                       0x08
-#define bm22kHz                         0x10
-#define bmSEL18V                        0x20
-#define bmDCtuned                       0x40
-#define bmArmed                         0x80
-
-/* Satellite modulation modes */
-#define ADV_MOD_DVB_QPSK 0     /* DVB-S QPSK */
-#define ADV_MOD_TURBO_QPSK 1   /* Turbo QPSK */
-#define ADV_MOD_TURBO_8PSK 2   /* Turbo 8PSK (also used for Trellis 8PSK) */
-#define ADV_MOD_TURBO_16QAM 3  /* Turbo 16QAM (also used for Trellis 8PSK) */
-
-#define ADV_MOD_DCII_C_QPSK 4  /* Digicipher II Combo */
-#define ADV_MOD_DCII_I_QPSK 5  /* Digicipher II I-stream */
-#define ADV_MOD_DCII_Q_QPSK 6  /* Digicipher II Q-stream */
-#define ADV_MOD_DCII_C_OQPSK 7 /* Digicipher II offset QPSK */
-#define ADV_MOD_DSS_QPSK 8     /* DSS (DIRECTV) QPSK */
-#define ADV_MOD_DVB_BPSK 9     /* DVB-S BPSK */
-
-#define GET_USB_SPEED                     0x07
-
-#define RESET_FX2                         0x13
-
-#define FW_VERSION_READ                   0x0B
-#define VENDOR_STRING_READ                0x0C
-#define PRODUCT_STRING_READ               0x0D
-#define FW_BCD_VERSION_READ               0x14
-
-/* firmware revision id's */
-#define GP8PSK_FW_REV1			0x020604
-#define GP8PSK_FW_REV2			0x020704
-#define GP8PSK_FW_VERS(_fw_vers)	((_fw_vers)[2]<<0x10 | (_fw_vers)[1]<<0x08 | (_fw_vers)[0])
-
-extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d);
-extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
-extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
-			     u16 index, u8 *b, int blen);
-extern int gp8psk_bcm4500_reload(struct dvb_usb_device *d);
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/it913x.c b/drivers/media/dvb/dvb-usb/it913x.c
deleted file mode 100644
index 6244fe9..0000000
--- a/drivers/media/dvb/dvb-usb/it913x.c
+++ /dev/null
@@ -1,931 +0,0 @@
-/* DVB USB compliant linux driver for IT9137
- *
- * Copyright (C) 2011 Malcolm Priestley (tvboxspy@gmail.com)
- * IT9137 (C) ITE Tech Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License Version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * see Documentation/dvb/README.dvb-usb for more information
- * see Documentation/dvb/it9137.txt for firmware information
- *
- */
-#define DVB_USB_LOG_PREFIX "it913x"
-
-#include <linux/usb.h>
-#include <linux/usb/input.h>
-#include <media/rc-core.h>
-
-#include "dvb-usb.h"
-#include "it913x-fe.h"
-
-/* debug */
-static int dvb_usb_it913x_debug;
-#define l_dprintk(var, level, args...) do { \
-	if ((var >= level)) \
-		printk(KERN_DEBUG DVB_USB_LOG_PREFIX ": " args); \
-} while (0)
-
-#define deb_info(level, args...) l_dprintk(dvb_usb_it913x_debug, level, args)
-#define debug_data_snipet(level, name, p) \
-	 deb_info(level, name" (%02x%02x%02x%02x%02x%02x%02x%02x)", \
-		*p, *(p+1), *(p+2), *(p+3), *(p+4), \
-			*(p+5), *(p+6), *(p+7));
-
-
-module_param_named(debug, dvb_usb_it913x_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))."
-			DVB_USB_DEBUG_STATUS);
-
-static int pid_filter;
-module_param_named(pid, pid_filter, int, 0644);
-MODULE_PARM_DESC(pid, "set default 0=on 1=off");
-
-static int dvb_usb_it913x_firmware;
-module_param_named(firmware, dvb_usb_it913x_firmware, int, 0644);
-MODULE_PARM_DESC(firmware, "set firmware 0=auto 1=IT9137 2=IT9135V1");
-
-
-int cmd_counter;
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-struct it913x_state {
-	u8 id;
-	struct ite_config it913x_config;
-	u8 pid_filter_onoff;
-};
-
-struct ite_config it913x_config;
-
-#define IT913X_RETRY	10
-#define IT913X_SND_TIMEOUT	100
-#define IT913X_RCV_TIMEOUT	200
-
-static int it913x_bulk_write(struct usb_device *dev,
-				u8 *snd, int len, u8 pipe)
-{
-	int ret, actual_l, i;
-
-	for (i = 0; i < IT913X_RETRY; i++) {
-		ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, pipe),
-				snd, len , &actual_l, IT913X_SND_TIMEOUT);
-		if (ret != -EBUSY && ret != -ETIMEDOUT)
-			break;
-	}
-
-	if (len != actual_l && ret == 0)
-		ret = -EAGAIN;
-
-	return ret;
-}
-
-static int it913x_bulk_read(struct usb_device *dev,
-				u8 *rev, int len, u8 pipe)
-{
-	int ret, actual_l, i;
-
-	for (i = 0; i < IT913X_RETRY; i++) {
-		ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, pipe),
-				 rev, len , &actual_l, IT913X_RCV_TIMEOUT);
-		if (ret != -EBUSY && ret != -ETIMEDOUT)
-			break;
-	}
-
-	if (len != actual_l && ret == 0)
-		ret = -EAGAIN;
-
-	return ret;
-}
-
-static u16 check_sum(u8 *p, u8 len)
-{
-	u16 sum = 0;
-	u8 i = 1;
-	while (i < len)
-		sum += (i++ & 1) ? (*p++) << 8 : *p++;
-	return ~sum;
-}
-
-static int it913x_usb_talk(struct usb_device *udev, u8 mode, u8 pro,
-			u8 cmd, u32 reg, u8 addr, u8 *data, u8 len)
-{
-	int ret = 0, i, buf_size = 1;
-	u8 *buff;
-	u8 rlen;
-	u16 chk_sum;
-
-	buff = kzalloc(256, GFP_KERNEL);
-	if (!buff) {
-		info("USB Buffer Failed");
-		return -ENOMEM;
-	}
-
-	buff[buf_size++] = pro;
-	buff[buf_size++] = cmd;
-	buff[buf_size++] = cmd_counter;
-
-	switch (mode) {
-	case READ_LONG:
-	case WRITE_LONG:
-		buff[buf_size++] = len;
-		buff[buf_size++] = 2;
-		buff[buf_size++] = (reg >> 24);
-		buff[buf_size++] = (reg >> 16) & 0xff;
-		buff[buf_size++] = (reg >> 8) & 0xff;
-		buff[buf_size++] = reg & 0xff;
-	break;
-	case READ_SHORT:
-		buff[buf_size++] = addr;
-		break;
-	case WRITE_SHORT:
-		buff[buf_size++] = len;
-		buff[buf_size++] = addr;
-		buff[buf_size++] = (reg >> 8) & 0xff;
-		buff[buf_size++] = reg & 0xff;
-	break;
-	case READ_DATA:
-	case WRITE_DATA:
-		break;
-	case WRITE_CMD:
-		mode = 7;
-		break;
-	default:
-		kfree(buff);
-		return -EINVAL;
-	}
-
-	if (mode & 1) {
-		for (i = 0; i < len ; i++)
-			buff[buf_size++] = data[i];
-	}
-	chk_sum = check_sum(&buff[1], buf_size);
-
-	buff[buf_size++] = chk_sum >> 8;
-	buff[0] = buf_size;
-	buff[buf_size++] = (chk_sum & 0xff);
-
-	ret = it913x_bulk_write(udev, buff, buf_size , 0x02);
-	if (ret < 0)
-		goto error;
-
-	ret = it913x_bulk_read(udev, buff, (mode & 1) ?
-			5 : len + 5 , 0x01);
-	if (ret < 0)
-		goto error;
-
-	rlen = (mode & 0x1) ? 0x1 : len;
-
-	if (mode & 1)
-		ret = buff[2];
-	else
-		memcpy(data, &buff[3], rlen);
-
-	cmd_counter++;
-
-error:	kfree(buff);
-
-	return ret;
-}
-
-static int it913x_io(struct usb_device *udev, u8 mode, u8 pro,
-			u8 cmd, u32 reg, u8 addr, u8 *data, u8 len)
-{
-	int ret, i;
-
-	for (i = 0; i < IT913X_RETRY; i++) {
-		ret = it913x_usb_talk(udev, mode, pro,
-			cmd, reg, addr, data, len);
-		if (ret != -EAGAIN)
-			break;
-	}
-
-	return ret;
-}
-
-static int it913x_wr_reg(struct usb_device *udev, u8 pro, u32 reg , u8 data)
-{
-	int ret;
-	u8 b[1];
-	b[0] = data;
-	ret = it913x_io(udev, WRITE_LONG, pro,
-			CMD_DEMOD_WRITE, reg, 0, b, sizeof(b));
-
-	return ret;
-}
-
-static int it913x_read_reg(struct usb_device *udev, u32 reg)
-{
-	int ret;
-	u8 data[1];
-
-	ret = it913x_io(udev, READ_LONG, DEV_0,
-			CMD_DEMOD_READ, reg, 0, &data[0], 1);
-
-	return (ret < 0) ? ret : data[0];
-}
-
-static u32 it913x_query(struct usb_device *udev, u8 pro)
-{
-	int ret, i;
-	u8 data[4];
-	u8 ver;
-
-	for (i = 0; i < 5; i++) {
-		ret = it913x_io(udev, READ_LONG, pro, CMD_DEMOD_READ,
-			0x1222, 0, &data[0], 3);
-		ver = data[0];
-		if (ver > 0 && ver < 3)
-			break;
-		msleep(100);
-	}
-
-	if (ver < 1 || ver > 2) {
-		info("Failed to identify chip version applying 1");
-		it913x_config.chip_ver = 0x1;
-		it913x_config.chip_type = 0x9135;
-		return 0;
-	}
-
-	it913x_config.chip_ver = ver;
-	it913x_config.chip_type = (u16)(data[2] << 8) + data[1];
-
-	info("Chip Version=%02x Chip Type=%04x", it913x_config.chip_ver,
-		it913x_config.chip_type);
-
-	ret |= it913x_io(udev, READ_SHORT, pro,
-			CMD_QUERYINFO, 0, 0x1, &data[0], 4);
-
-	it913x_config.firmware = (data[0] << 24) + (data[1] << 16) +
-			(data[2] << 8) + data[3];
-
-	return (ret < 0) ? 0 : it913x_config.firmware;
-}
-
-static int it913x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	struct it913x_state *st = adap->dev->priv;
-	struct usb_device *udev = adap->dev->udev;
-	int ret;
-	u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD;
-
-	mutex_lock(&adap->dev->i2c_mutex);
-
-	deb_info(1, "PID_C  (%02x)", onoff);
-
-	ret = it913x_wr_reg(udev, pro, PID_EN, st->pid_filter_onoff);
-
-	mutex_unlock(&adap->dev->i2c_mutex);
-	return ret;
-}
-
-static int it913x_pid_filter(struct dvb_usb_adapter *adap,
-		int index, u16 pid, int onoff)
-{
-	struct it913x_state *st = adap->dev->priv;
-	struct usb_device *udev = adap->dev->udev;
-	int ret;
-	u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD;
-
-	mutex_lock(&adap->dev->i2c_mutex);
-
-	deb_info(1, "PID_F  (%02x)", onoff);
-
-	ret = it913x_wr_reg(udev, pro, PID_LSB, (u8)(pid & 0xff));
-
-	ret |= it913x_wr_reg(udev, pro, PID_MSB, (u8)(pid >> 8));
-
-	ret |= it913x_wr_reg(udev, pro, PID_INX_EN, (u8)onoff);
-
-	ret |= it913x_wr_reg(udev, pro, PID_INX, (u8)(index & 0x1f));
-
-	if (udev->speed == USB_SPEED_HIGH && pid == 0x2000) {
-			ret |= it913x_wr_reg(udev, pro, PID_EN, !onoff);
-			st->pid_filter_onoff = !onoff;
-	} else
-		st->pid_filter_onoff =
-			adap->fe_adap[adap->active_fe].pid_filtering;
-
-	mutex_unlock(&adap->dev->i2c_mutex);
-	return 0;
-}
-
-
-static int it913x_return_status(struct usb_device *udev)
-{
-	u32 firm = 0;
-
-	firm = it913x_query(udev, DEV_0);
-	if (firm > 0)
-		info("Firmware Version %d", firm);
-
-	return (firm > 0) ? firm : 0;
-}
-
-static int it913x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
-				 int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	static u8 data[256];
-	int ret;
-	u32 reg;
-	u8 pro;
-
-	mutex_lock(&d->i2c_mutex);
-
-	debug_data_snipet(1, "Message out", msg[0].buf);
-	deb_info(2, "num of messages %d address %02x", num, msg[0].addr);
-
-	pro = (msg[0].addr & 0x2) ?  DEV_0_DMOD : 0x0;
-	pro |= (msg[0].addr & 0x20) ? DEV_1 : DEV_0;
-	memcpy(data, msg[0].buf, msg[0].len);
-	reg = (data[0] << 24) + (data[1] << 16) +
-			(data[2] << 8) + data[3];
-	if (num == 2) {
-		ret = it913x_io(d->udev, READ_LONG, pro,
-			CMD_DEMOD_READ, reg, 0, data, msg[1].len);
-		memcpy(msg[1].buf, data, msg[1].len);
-	} else
-		ret = it913x_io(d->udev, WRITE_LONG, pro, CMD_DEMOD_WRITE,
-			reg, 0, &data[4], msg[0].len - 4);
-
-	mutex_unlock(&d->i2c_mutex);
-
-	return ret;
-}
-
-static u32 it913x_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm it913x_i2c_algo = {
-	.master_xfer   = it913x_i2c_xfer,
-	.functionality = it913x_i2c_func,
-};
-
-/* Callbacks for DVB USB */
-#define IT913X_POLL 250
-static int it913x_rc_query(struct dvb_usb_device *d)
-{
-	u8 ibuf[4];
-	int ret;
-	u32 key;
-	/* Avoid conflict with frontends*/
-	mutex_lock(&d->i2c_mutex);
-
-	ret = it913x_io(d->udev, READ_LONG, PRO_LINK, CMD_IR_GET,
-		0, 0, &ibuf[0], sizeof(ibuf));
-
-	if ((ibuf[2] + ibuf[3]) == 0xff) {
-		key = ibuf[2];
-		key += ibuf[0] << 16;
-		key += ibuf[1] << 8;
-		deb_info(1, "NEC Extended Key =%08x", key);
-		if (d->rc_dev != NULL)
-			rc_keydown(d->rc_dev, key, 0);
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-
-	return ret;
-}
-
-/* Firmware sets raw */
-const char fw_it9135_v1[] = "dvb-usb-it9135-01.fw";
-const char fw_it9135_v2[] = "dvb-usb-it9135-02.fw";
-const char fw_it9137[] = "dvb-usb-it9137-01.fw";
-
-static int ite_firmware_select(struct usb_device *udev,
-	struct dvb_usb_device_properties *props)
-{
-	int sw;
-	/* auto switch */
-	if (le16_to_cpu(udev->descriptor.idVendor) == USB_VID_KWORLD_2)
-		sw = IT9137_FW;
-	else if (it913x_config.chip_ver == 1)
-		sw = IT9135_V1_FW;
-	else
-		sw = IT9135_V2_FW;
-
-	/* force switch */
-	if (dvb_usb_it913x_firmware != IT9135_AUTO)
-		sw = dvb_usb_it913x_firmware;
-
-	switch (sw) {
-	case IT9135_V1_FW:
-		it913x_config.firmware_ver = 1;
-		it913x_config.adc_x2 = 1;
-		it913x_config.read_slevel = false;
-		props->firmware = fw_it9135_v1;
-		break;
-	case IT9135_V2_FW:
-		it913x_config.firmware_ver = 1;
-		it913x_config.adc_x2 = 1;
-		it913x_config.read_slevel = false;
-		props->firmware = fw_it9135_v2;
-		switch (it913x_config.tuner_id_0) {
-		case IT9135_61:
-		case IT9135_62:
-			break;
-		default:
-			info("Unknown tuner ID applying default 0x60");
-		case IT9135_60:
-			it913x_config.tuner_id_0 = IT9135_60;
-		}
-		break;
-	case IT9137_FW:
-	default:
-		it913x_config.firmware_ver = 0;
-		it913x_config.adc_x2 = 0;
-		it913x_config.read_slevel = true;
-		props->firmware = fw_it9137;
-	}
-
-	return 0;
-}
-
-static void it913x_select_remote(struct usb_device *udev,
-	struct dvb_usb_device_properties *props)
-{
-	switch (le16_to_cpu(udev->descriptor.idProduct)) {
-	case USB_PID_ITETECH_IT9135_9005:
-		props->rc.core.rc_codes = RC_MAP_IT913X_V2;
-		return;
-	default:
-		props->rc.core.rc_codes = RC_MAP_IT913X_V1;
-	}
-	return;
-}
-
-#define TS_MPEG_PKT_SIZE	188
-#define EP_LOW			21
-#define TS_BUFFER_SIZE_PID	(EP_LOW*TS_MPEG_PKT_SIZE)
-#define EP_HIGH			348
-#define TS_BUFFER_SIZE_MAX	(EP_HIGH*TS_MPEG_PKT_SIZE)
-
-static int it913x_select_config(struct usb_device *udev,
-	struct dvb_usb_device_properties *props)
-{
-	int ret = 0, reg;
-	bool proprietary_ir = false;
-
-	if (it913x_config.chip_ver == 0x02
-			&& it913x_config.chip_type == 0x9135)
-		reg = it913x_read_reg(udev, 0x461d);
-	else
-		reg = it913x_read_reg(udev, 0x461b);
-
-	if (reg < 0)
-		return reg;
-
-	if (reg == 0) {
-		it913x_config.dual_mode = 0;
-		it913x_config.tuner_id_0 = IT9135_38;
-		proprietary_ir = true;
-	} else {
-		/* TS mode */
-		reg =  it913x_read_reg(udev, 0x49c5);
-		if (reg < 0)
-			return reg;
-		it913x_config.dual_mode = reg;
-
-		/* IR mode type */
-		reg = it913x_read_reg(udev, 0x49ac);
-		if (reg < 0)
-			return reg;
-		if (reg == 5) {
-			info("Remote propriety (raw) mode");
-			proprietary_ir = true;
-		} else if (reg == 1) {
-			info("Remote HID mode NOT SUPPORTED");
-			proprietary_ir = false;
-			props->rc.core.rc_codes = NULL;
-		} else
-			props->rc.core.rc_codes = NULL;
-
-		/* Tuner_id */
-		reg = it913x_read_reg(udev, 0x49d0);
-		if (reg < 0)
-			return reg;
-		it913x_config.tuner_id_0 = reg;
-	}
-
-	if (proprietary_ir)
-		it913x_select_remote(udev, props);
-
-	if (udev->speed != USB_SPEED_HIGH) {
-		props->adapter[0].fe[0].pid_filter_count = 5;
-		info("USB 1 low speed mode - connect to USB 2 port");
-		if (pid_filter > 0)
-			pid_filter = 0;
-		if (it913x_config.dual_mode) {
-			it913x_config.dual_mode = 0;
-			info("Dual mode not supported in USB 1");
-		}
-	} else /* For replugging */
-		if(props->adapter[0].fe[0].pid_filter_count == 5)
-			props->adapter[0].fe[0].pid_filter_count = 31;
-
-	/* Select Stream Buffer Size and pid filter option*/
-	if (pid_filter) {
-		props->adapter[0].fe[0].stream.u.bulk.buffersize =
-			TS_BUFFER_SIZE_MAX;
-		props->adapter[0].fe[0].caps &=
-			~DVB_USB_ADAP_NEED_PID_FILTERING;
-	} else
-		props->adapter[0].fe[0].stream.u.bulk.buffersize =
-			TS_BUFFER_SIZE_PID;
-
-	if (it913x_config.dual_mode) {
-		props->adapter[1].fe[0].stream.u.bulk.buffersize =
-			props->adapter[0].fe[0].stream.u.bulk.buffersize;
-		props->num_adapters = 2;
-		if (pid_filter)
-			props->adapter[1].fe[0].caps =
-				props->adapter[0].fe[0].caps;
-	} else
-		props->num_adapters = 1;
-
-	info("Dual mode=%x Tuner Type=%x", it913x_config.dual_mode,
-		it913x_config.tuner_id_0);
-
-	ret = ite_firmware_select(udev, props);
-
-	return ret;
-}
-
-static int it913x_identify_state(struct usb_device *udev,
-		struct dvb_usb_device_properties *props,
-		struct dvb_usb_device_description **desc,
-		int *cold)
-{
-	int ret = 0, firm_no;
-	u8 reg;
-
-	firm_no = it913x_return_status(udev);
-
-	/* Read and select config */
-	ret = it913x_select_config(udev, props);
-	if (ret < 0)
-		return ret;
-
-	if (firm_no > 0) {
-		*cold = 0;
-		return 0;
-	}
-
-	if (it913x_config.dual_mode) {
-		it913x_config.tuner_id_1 = it913x_read_reg(udev, 0x49e0);
-		ret = it913x_wr_reg(udev, DEV_0, GPIOH1_EN, 0x1);
-		ret |= it913x_wr_reg(udev, DEV_0, GPIOH1_ON, 0x1);
-		ret |= it913x_wr_reg(udev, DEV_0, GPIOH1_O, 0x1);
-		msleep(50);
-		ret |= it913x_wr_reg(udev, DEV_0, GPIOH1_O, 0x0);
-		msleep(50);
-		reg = it913x_read_reg(udev, GPIOH1_O);
-		if (reg == 0) {
-			ret |= it913x_wr_reg(udev, DEV_0,  GPIOH1_O, 0x1);
-			ret |= it913x_return_status(udev);
-			if (ret != 0)
-				ret = it913x_wr_reg(udev, DEV_0,
-					GPIOH1_O, 0x0);
-		}
-	}
-
-	reg = it913x_read_reg(udev, IO_MUX_POWER_CLK);
-
-	if (it913x_config.dual_mode) {
-		ret |= it913x_wr_reg(udev, DEV_0, 0x4bfb, CHIP2_I2C_ADDR);
-		if (it913x_config.firmware_ver == 1)
-			ret |= it913x_wr_reg(udev, DEV_0,  0xcfff, 0x1);
-		else
-			ret |= it913x_wr_reg(udev, DEV_0,  CLK_O_EN, 0x1);
-	} else {
-		ret |= it913x_wr_reg(udev, DEV_0, 0x4bfb, 0x0);
-		if (it913x_config.firmware_ver == 1)
-			ret |= it913x_wr_reg(udev, DEV_0,  0xcfff, 0x0);
-		else
-			ret |= it913x_wr_reg(udev, DEV_0,  CLK_O_EN, 0x0);
-	}
-
-	*cold = 1;
-
-	return (ret < 0) ? -ENODEV : 0;
-}
-
-static int it913x_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	struct it913x_state *st = adap->dev->priv;
-	int ret = 0;
-	u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD;
-
-	deb_info(1, "STM  (%02x)", onoff);
-
-	if (!onoff) {
-		mutex_lock(&adap->dev->i2c_mutex);
-
-		ret = it913x_wr_reg(adap->dev->udev, pro, PID_RST, 0x1);
-
-		mutex_unlock(&adap->dev->i2c_mutex);
-		st->pid_filter_onoff =
-			adap->fe_adap[adap->active_fe].pid_filtering;
-
-	}
-
-	return ret;
-}
-
-static int it913x_download_firmware(struct usb_device *udev,
-					const struct firmware *fw)
-{
-	int ret = 0, i = 0, pos = 0;
-	u8 packet_size, min_pkt;
-	u8 *fw_data;
-
-	ret = it913x_wr_reg(udev, DEV_0,  I2C_CLK, I2C_CLK_100);
-
-	info("FRM Starting Firmware Download");
-
-	/* Multi firmware loader */
-	/* This uses scatter write firmware headers */
-	/* The firmware must start with 03 XX 00 */
-	/* and be the extact firmware length */
-
-	if (it913x_config.chip_ver == 2)
-		min_pkt = 0x11;
-	else
-		min_pkt = 0x19;
-
-	while (i <= fw->size) {
-		if (((fw->data[i] == 0x3) && (fw->data[i + 2] == 0x0))
-			|| (i == fw->size)) {
-			packet_size = i - pos;
-			if ((packet_size > min_pkt) || (i == fw->size)) {
-				fw_data = (u8 *)(fw->data + pos);
-				pos += packet_size;
-				if (packet_size > 0) {
-					ret = it913x_io(udev, WRITE_DATA,
-						DEV_0, CMD_SCATTER_WRITE, 0,
-						0, fw_data, packet_size);
-					if (ret < 0)
-						break;
-				}
-				udelay(1000);
-			}
-		}
-		i++;
-	}
-
-	if (ret < 0)
-		info("FRM Firmware Download Failed (%d)" , ret);
-	else
-		info("FRM Firmware Download Completed - Resetting Device");
-
-	msleep(30);
-
-	ret = it913x_io(udev, WRITE_CMD, DEV_0, CMD_BOOT, 0, 0, NULL, 0);
-	if (ret < 0)
-		info("FRM Device not responding to reboot");
-
-	ret = it913x_return_status(udev);
-	if (ret == 0) {
-		info("FRM Failed to reboot device");
-		return -ENODEV;
-	}
-
-	msleep(30);
-
-	ret = it913x_wr_reg(udev, DEV_0,  I2C_CLK, I2C_CLK_400);
-
-	msleep(30);
-
-	/* Tuner function */
-	if (it913x_config.dual_mode)
-		ret |= it913x_wr_reg(udev, DEV_0_DMOD , 0xec4c, 0xa0);
-	else
-		ret |= it913x_wr_reg(udev, DEV_0_DMOD , 0xec4c, 0x68);
-
-	if ((it913x_config.chip_ver == 1) &&
-		(it913x_config.chip_type == 0x9135)) {
-		ret |= it913x_wr_reg(udev, DEV_0,  PADODPU, 0x0);
-		ret |= it913x_wr_reg(udev, DEV_0,  AGC_O_D, 0x0);
-		if (it913x_config.dual_mode) {
-			ret |= it913x_wr_reg(udev, DEV_1,  PADODPU, 0x0);
-			ret |= it913x_wr_reg(udev, DEV_1,  AGC_O_D, 0x0);
-		}
-	}
-
-	return (ret < 0) ? -ENODEV : 0;
-}
-
-static int it913x_name(struct dvb_usb_adapter *adap)
-{
-	const char *desc = adap->dev->desc->name;
-	char *fe_name[] = {"_1", "_2", "_3", "_4"};
-	char *name = adap->fe_adap[0].fe->ops.info.name;
-
-	strlcpy(name, desc, 128);
-	strlcat(name, fe_name[adap->id], 128);
-
-	return 0;
-}
-
-static int it913x_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct usb_device *udev = adap->dev->udev;
-	struct it913x_state *st = adap->dev->priv;
-	int ret = 0;
-	u8 adap_addr = I2C_BASE_ADDR + (adap->id << 5);
-	u16 ep_size = adap->props.fe[0].stream.u.bulk.buffersize / 4;
-	u8 pkt_size = 0x80;
-
-	if (adap->dev->udev->speed != USB_SPEED_HIGH)
-		pkt_size = 0x10;
-
-	it913x_config.adf = it913x_read_reg(udev, IO_MUX_POWER_CLK);
-
-	if (adap->id == 0)
-		memcpy(&st->it913x_config, &it913x_config,
-			sizeof(struct ite_config));
-
-	adap->fe_adap[0].fe = dvb_attach(it913x_fe_attach,
-		&adap->dev->i2c_adap, adap_addr, &st->it913x_config);
-
-	if (adap->id == 0 && adap->fe_adap[0].fe) {
-		ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2_SW_RST, 0x1);
-		ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2IF2_SW_RST, 0x1);
-		ret = it913x_wr_reg(udev, DEV_0, EP0_TX_EN, 0x0f);
-		ret = it913x_wr_reg(udev, DEV_0, EP0_TX_NAK, 0x1b);
-		ret = it913x_wr_reg(udev, DEV_0, EP0_TX_EN, 0x2f);
-		ret = it913x_wr_reg(udev, DEV_0, EP4_TX_LEN_LSB,
-					ep_size & 0xff);
-		ret = it913x_wr_reg(udev, DEV_0, EP4_TX_LEN_MSB, ep_size >> 8);
-		ret = it913x_wr_reg(udev, DEV_0, EP4_MAX_PKT, pkt_size);
-	} else if (adap->id == 1 && adap->fe_adap[0].fe) {
-		ret = it913x_wr_reg(udev, DEV_0, EP0_TX_EN, 0x6f);
-		ret = it913x_wr_reg(udev, DEV_0, EP5_TX_LEN_LSB,
-					ep_size & 0xff);
-		ret = it913x_wr_reg(udev, DEV_0, EP5_TX_LEN_MSB, ep_size >> 8);
-		ret = it913x_wr_reg(udev, DEV_0, EP5_MAX_PKT, pkt_size);
-		ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2IF2_EN, 0x1);
-		ret = it913x_wr_reg(udev, DEV_1_DMOD, MP2IF_SERIAL, 0x1);
-		ret = it913x_wr_reg(udev, DEV_1, TOP_HOSTB_SER_MODE, 0x1);
-		ret = it913x_wr_reg(udev, DEV_0_DMOD, TSIS_ENABLE, 0x1);
-		ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2_SW_RST, 0x0);
-		ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2IF2_SW_RST, 0x0);
-		ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2IF2_HALF_PSB, 0x0);
-		ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2IF_STOP_EN, 0x1);
-		ret = it913x_wr_reg(udev, DEV_1_DMOD, MPEG_FULL_SPEED, 0x0);
-		ret = it913x_wr_reg(udev, DEV_1_DMOD, MP2IF_STOP_EN, 0x0);
-	} else
-		return -ENODEV;
-
-	ret = it913x_name(adap);
-
-	return ret;
-}
-
-/* DVB USB Driver */
-static struct dvb_usb_device_properties it913x_properties;
-
-static int it913x_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	cmd_counter = 0;
-	if (0 == dvb_usb_device_init(intf, &it913x_properties,
-				     THIS_MODULE, NULL, adapter_nr)) {
-		info("DEV registering device driver");
-		return 0;
-	}
-
-	info("DEV it913x Error");
-	return -ENODEV;
-
-}
-
-static struct usb_device_id it913x_table[] = {
-	{ USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB499_2T_T09) },
-	{ USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135) },
-	{ USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22_IT9137) },
-	{ USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9005) },
-	{ USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9006) },
-	{}		/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, it913x_table);
-
-static struct dvb_usb_device_properties it913x_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-	.usb_ctrl = DEVICE_SPECIFIC,
-	.download_firmware = it913x_download_firmware,
-	.firmware = "dvb-usb-it9137-01.fw",
-	.no_reconnect = 1,
-	.size_of_priv = sizeof(struct it913x_state),
-	.num_adapters = 2,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.caps = DVB_USB_ADAP_HAS_PID_FILTER|
-				DVB_USB_ADAP_NEED_PID_FILTERING|
-				DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-			.streaming_ctrl   = it913x_streaming_ctrl,
-			.pid_filter_count = 31,
-			.pid_filter = it913x_pid_filter,
-			.pid_filter_ctrl  = it913x_pid_filter_ctrl,
-			.frontend_attach  = it913x_frontend_attach,
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 10,
-				.endpoint = 0x04,
-				.u = {/* Keep Low if PID filter on */
-					.bulk = {
-					.buffersize =
-						TS_BUFFER_SIZE_PID,
-					}
-				}
-			}
-		}},
-		},
-			{
-		.num_frontends = 1,
-		.fe = {{
-			.caps = DVB_USB_ADAP_HAS_PID_FILTER|
-				DVB_USB_ADAP_NEED_PID_FILTERING|
-				DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-			.streaming_ctrl   = it913x_streaming_ctrl,
-			.pid_filter_count = 31,
-			.pid_filter = it913x_pid_filter,
-			.pid_filter_ctrl  = it913x_pid_filter_ctrl,
-			.frontend_attach  = it913x_frontend_attach,
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 5,
-				.endpoint = 0x05,
-				.u = {
-					.bulk = {
-						.buffersize =
-							TS_BUFFER_SIZE_PID,
-					}
-				}
-			}
-		}},
-		}
-	},
-	.identify_state   = it913x_identify_state,
-	.rc.core = {
-		.protocol	= RC_TYPE_NEC,
-		.module_name	= "it913x",
-		.rc_query	= it913x_rc_query,
-		.rc_interval	= IT913X_POLL,
-		.allowed_protos	= RC_TYPE_NEC,
-		.rc_codes	= RC_MAP_IT913X_V1,
-	},
-	.i2c_algo         = &it913x_i2c_algo,
-	.num_device_descs = 5,
-	.devices = {
-		{   "Kworld UB499-2T T09(IT9137)",
-			{ &it913x_table[0], NULL },
-			},
-		{   "ITE 9135 Generic",
-			{ &it913x_table[1], NULL },
-			},
-		{   "Sveon STV22 Dual DVB-T HDTV(IT9137)",
-			{ &it913x_table[2], NULL },
-			},
-		{   "ITE 9135(9005) Generic",
-			{ &it913x_table[3], NULL },
-			},
-		{   "ITE 9135(9006) Generic",
-			{ &it913x_table[4], NULL },
-			},
-	}
-};
-
-static struct usb_driver it913x_driver = {
-	.name		= "it913x",
-	.probe		= it913x_probe,
-	.disconnect	= dvb_usb_device_exit,
-	.id_table	= it913x_table,
-};
-
-module_usb_driver(it913x_driver);
-
-MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
-MODULE_DESCRIPTION("it913x USB 2 Driver");
-MODULE_VERSION("1.28");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c
deleted file mode 100644
index 25d1031..0000000
--- a/drivers/media/dvb/dvb-usb/lmedm04.c
+++ /dev/null
@@ -1,1407 +0,0 @@
-/* DVB USB compliant linux driver for
- *
- * DM04/QQBOX DVB-S USB BOX	LME2510C + SHARP:BS2F7HZ7395
- *				LME2510C + LG TDQY-P001F
- *				LME2510C + BS2F7HZ0194
- *				LME2510 + LG TDQY-P001F
- *				LME2510 + BS2F7HZ0194
- *
- * MVB7395 (LME2510C+SHARP:BS2F7HZ7395)
- * SHARP:BS2F7HZ7395 = (STV0288+Sharp IX2505V)
- *
- * MV001F (LME2510+LGTDQY-P001F)
- * LG TDQY - P001F =(TDA8263 + TDA10086H)
- *
- * MVB0001F (LME2510C+LGTDQT-P001F)
- *
- * MV0194 (LME2510+SHARP:BS2F7HZ0194)
- * SHARP:BS2F7HZ0194 = (STV0299+IX2410)
- *
- * MVB0194 (LME2510C+SHARP0194)
- *
- * For firmware see Documentation/dvb/lmedm04.txt
- *
- * I2C addresses:
- * 0xd0 - STV0288	- Demodulator
- * 0xc0 - Sharp IX2505V	- Tuner
- * --
- * 0x1c - TDA10086   - Demodulator
- * 0xc0 - TDA8263    - Tuner
- * --
- * 0xd0 - STV0299	- Demodulator
- * 0xc0 - IX2410	- Tuner
- *
- *
- * VID = 3344  PID LME2510=1122 LME2510C=1120
- *
- * Copyright (C) 2010 Malcolm Priestley (tvboxspy@gmail.com)
- * LME2510(C)(C) Leaguerme (Shenzhen) MicroElectronics Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License Version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * see Documentation/dvb/README.dvb-usb for more information
- *
- * Known Issues :
- *	LME2510: Non Intel USB chipsets fail to maintain High Speed on
- * Boot or Hot Plug.
- *
- * QQbox suffers from noise on LNB voltage.
- *
- *	LME2510: SHARP:BS2F7HZ0194(MV0194) cannot cold reset and share system
- * with other tuners. After a cold reset streaming will not start.
- *
- */
-#define DVB_USB_LOG_PREFIX "LME2510(C)"
-#include <linux/usb.h>
-#include <linux/usb/input.h>
-#include <media/rc-core.h>
-
-#include "dvb-usb.h"
-#include "lmedm04.h"
-#include "tda826x.h"
-#include "tda10086.h"
-#include "stv0288.h"
-#include "ix2505v.h"
-#include "stv0299.h"
-#include "dvb-pll.h"
-#include "z0194a.h"
-#include "m88rs2000.h"
-
-
-
-/* debug */
-static int dvb_usb_lme2510_debug;
-#define l_dprintk(var, level, args...) do { \
-	if ((var >= level)) \
-		printk(KERN_DEBUG DVB_USB_LOG_PREFIX ": " args); \
-} while (0)
-
-#define deb_info(level, args...) l_dprintk(dvb_usb_lme2510_debug, level, args)
-#define debug_data_snipet(level, name, p) \
-	 deb_info(level, name" (%02x%02x%02x%02x%02x%02x%02x%02x)", \
-		*p, *(p+1), *(p+2), *(p+3), *(p+4), \
-			*(p+5), *(p+6), *(p+7));
-
-
-module_param_named(debug, dvb_usb_lme2510_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))."
-			DVB_USB_DEBUG_STATUS);
-
-static int dvb_usb_lme2510_firmware;
-module_param_named(firmware, dvb_usb_lme2510_firmware, int, 0644);
-MODULE_PARM_DESC(firmware, "set default firmware 0=Sharp7395 1=LG");
-
-static int pid_filter;
-module_param_named(pid, pid_filter, int, 0644);
-MODULE_PARM_DESC(pid, "set default 0=default 1=off 2=on");
-
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-#define TUNER_DEFAULT	0x0
-#define TUNER_LG	0x1
-#define TUNER_S7395	0x2
-#define TUNER_S0194	0x3
-#define TUNER_RS2000	0x4
-
-struct lme2510_state {
-	u8 id;
-	u8 tuner_config;
-	u8 signal_lock;
-	u8 signal_level;
-	u8 signal_sn;
-	u8 time_key;
-	u8 last_key;
-	u8 key_timeout;
-	u8 i2c_talk_onoff;
-	u8 i2c_gate;
-	u8 i2c_tuner_gate_w;
-	u8 i2c_tuner_gate_r;
-	u8 i2c_tuner_addr;
-	u8 stream_on;
-	u8 pid_size;
-	u8 pid_off;
-	void *buffer;
-	struct urb *lme_urb;
-	void *usb_buffer;
-
-};
-
-static int lme2510_bulk_write(struct usb_device *dev,
-				u8 *snd, int len, u8 pipe)
-{
-	int ret, actual_l;
-
-	ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, pipe),
-				snd, len , &actual_l, 100);
-	return ret;
-}
-
-static int lme2510_bulk_read(struct usb_device *dev,
-				u8 *rev, int len, u8 pipe)
-{
-	int ret, actual_l;
-
-	ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, pipe),
-				 rev, len , &actual_l, 200);
-	return ret;
-}
-
-static int lme2510_usb_talk(struct dvb_usb_device *d,
-		u8 *wbuf, int wlen, u8 *rbuf, int rlen)
-{
-	struct lme2510_state *st = d->priv;
-	u8 *buff;
-	int ret = 0;
-
-	if (st->usb_buffer == NULL) {
-		st->usb_buffer = kmalloc(64, GFP_KERNEL);
-		if (st->usb_buffer == NULL) {
-			info("MEM Error no memory");
-			return -ENOMEM;
-		}
-	}
-	buff = st->usb_buffer;
-
-	ret = mutex_lock_interruptible(&d->usb_mutex);
-
-	if (ret < 0)
-		return -EAGAIN;
-
-	/* the read/write capped at 64 */
-	memcpy(buff, wbuf, (wlen < 64) ? wlen : 64);
-
-	ret |= lme2510_bulk_write(d->udev, buff, wlen , 0x01);
-
-	ret |= lme2510_bulk_read(d->udev, buff, (rlen < 64) ?
-			rlen : 64 , 0x01);
-
-	if (rlen > 0)
-		memcpy(rbuf, buff, rlen);
-
-	mutex_unlock(&d->usb_mutex);
-
-	return (ret < 0) ? -ENODEV : 0;
-}
-
-static int lme2510_stream_restart(struct dvb_usb_device *d)
-{
-	struct lme2510_state *st = d->priv;
-	u8 all_pids[] = LME_ALL_PIDS;
-	u8 stream_on[] = LME_ST_ON_W;
-	int ret;
-	u8 rbuff[1];
-	if (st->pid_off)
-		ret = lme2510_usb_talk(d, all_pids, sizeof(all_pids),
-			rbuff, sizeof(rbuff));
-	/*Restart Stream Command*/
-	ret = lme2510_usb_talk(d, stream_on, sizeof(stream_on),
-			rbuff, sizeof(rbuff));
-	return ret;
-}
-
-static int lme2510_enable_pid(struct dvb_usb_device *d, u8 index, u16 pid_out)
-{
-	struct lme2510_state *st = d->priv;
-	static u8 pid_buff[] = LME_ZERO_PID;
-	static u8 rbuf[1];
-	u8 pid_no = index * 2;
-	u8 pid_len = pid_no + 2;
-	int ret = 0;
-	deb_info(1, "PID Setting Pid %04x", pid_out);
-
-	if (st->pid_size == 0)
-		ret |= lme2510_stream_restart(d);
-
-	pid_buff[2] = pid_no;
-	pid_buff[3] = (u8)pid_out & 0xff;
-	pid_buff[4] = pid_no + 1;
-	pid_buff[5] = (u8)(pid_out >> 8);
-
-	if (pid_len > st->pid_size)
-		st->pid_size = pid_len;
-	pid_buff[7] = 0x80 + st->pid_size;
-
-	ret |= lme2510_usb_talk(d, pid_buff ,
-		sizeof(pid_buff) , rbuf, sizeof(rbuf));
-
-	if (st->stream_on)
-		ret |= lme2510_stream_restart(d);
-
-	return ret;
-}
-
-static void lme2510_int_response(struct urb *lme_urb)
-{
-	struct dvb_usb_adapter *adap = lme_urb->context;
-	struct lme2510_state *st = adap->dev->priv;
-	static u8 *ibuf, *rbuf;
-	int i = 0, offset;
-	u32 key;
-
-	switch (lme_urb->status) {
-	case 0:
-	case -ETIMEDOUT:
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		return;
-	default:
-		info("Error %x", lme_urb->status);
-		break;
-	}
-
-	rbuf = (u8 *) lme_urb->transfer_buffer;
-
-	offset = ((lme_urb->actual_length/8) > 4)
-			? 4 : (lme_urb->actual_length/8) ;
-
-	for (i = 0; i < offset; ++i) {
-		ibuf = (u8 *)&rbuf[i*8];
-		deb_info(5, "INT O/S C =%02x C/O=%02x Type =%02x%02x",
-		offset, i, ibuf[0], ibuf[1]);
-
-		switch (ibuf[0]) {
-		case 0xaa:
-			debug_data_snipet(1, "INT Remote data snipet", ibuf);
-			if ((ibuf[4] + ibuf[5]) == 0xff) {
-				key = ibuf[5];
-				key += (ibuf[3] > 0)
-					? (ibuf[3] ^ 0xff) << 8 : 0;
-				key += (ibuf[2] ^ 0xff) << 16;
-				deb_info(1, "INT Key =%08x", key);
-				if (adap->dev->rc_dev != NULL)
-					rc_keydown(adap->dev->rc_dev, key, 0);
-			}
-			break;
-		case 0xbb:
-			switch (st->tuner_config) {
-			case TUNER_LG:
-				if (ibuf[2] > 0)
-					st->signal_lock = ibuf[2];
-				st->signal_level = ibuf[4];
-				st->signal_sn = ibuf[3];
-				st->time_key = ibuf[7];
-				break;
-			case TUNER_S7395:
-			case TUNER_S0194:
-				/* Tweak for earlier firmware*/
-				if (ibuf[1] == 0x03) {
-					if (ibuf[2] > 1)
-						st->signal_lock = ibuf[2];
-					st->signal_level = ibuf[3];
-					st->signal_sn = ibuf[4];
-				} else {
-					st->signal_level = ibuf[4];
-					st->signal_sn = ibuf[5];
-					st->signal_lock =
-						(st->signal_lock & 0xf7) +
-						((ibuf[2] & 0x01) << 0x03);
-				}
-				break;
-			case TUNER_RS2000:
-				if (ibuf[2] > 0)
-					st->signal_lock = 0xff;
-				else
-					st->signal_lock = 0xf0;
-				st->signal_level = ibuf[4];
-				st->signal_sn = ibuf[5];
-				st->time_key = ibuf[7];
-			default:
-				break;
-			}
-			debug_data_snipet(5, "INT Remote data snipet in", ibuf);
-		break;
-		case 0xcc:
-			debug_data_snipet(1, "INT Control data snipet", ibuf);
-			break;
-		default:
-			debug_data_snipet(1, "INT Unknown data snipet", ibuf);
-		break;
-		}
-	}
-	usb_submit_urb(lme_urb, GFP_ATOMIC);
-}
-
-static int lme2510_int_read(struct dvb_usb_adapter *adap)
-{
-	struct lme2510_state *lme_int = adap->dev->priv;
-
-	lme_int->lme_urb = usb_alloc_urb(0, GFP_ATOMIC);
-
-	if (lme_int->lme_urb == NULL)
-			return -ENOMEM;
-
-	lme_int->buffer = usb_alloc_coherent(adap->dev->udev, 128, GFP_ATOMIC,
-					&lme_int->lme_urb->transfer_dma);
-
-	if (lme_int->buffer == NULL)
-			return -ENOMEM;
-
-	usb_fill_int_urb(lme_int->lme_urb,
-				adap->dev->udev,
-				usb_rcvintpipe(adap->dev->udev, 0xa),
-				lme_int->buffer,
-				128,
-				lme2510_int_response,
-				adap,
-				8);
-
-	lme_int->lme_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	usb_submit_urb(lme_int->lme_urb, GFP_ATOMIC);
-	info("INT Interrupt Service Started");
-
-	return 0;
-}
-
-static int lme2510_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	struct lme2510_state *st = adap->dev->priv;
-	static u8 clear_pid_reg[] = LME_ALL_PIDS;
-	static u8 rbuf[1];
-	int ret = 0;
-
-	deb_info(1, "PID Clearing Filter");
-
-	mutex_lock(&adap->dev->i2c_mutex);
-
-	if (!onoff) {
-		ret |= lme2510_usb_talk(adap->dev, clear_pid_reg,
-			sizeof(clear_pid_reg), rbuf, sizeof(rbuf));
-		st->pid_off = true;
-	} else
-		st->pid_off = false;
-
-	st->pid_size = 0;
-
-	mutex_unlock(&adap->dev->i2c_mutex);
-
-	return 0;
-}
-
-static int lme2510_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
-	int onoff)
-{
-	int ret = 0;
-
-	deb_info(3, "%s PID=%04x Index=%04x onoff=%02x", __func__,
-		pid, index, onoff);
-
-	if (onoff) {
-		mutex_lock(&adap->dev->i2c_mutex);
-		ret |= lme2510_enable_pid(adap->dev, index, pid);
-		mutex_unlock(&adap->dev->i2c_mutex);
-	}
-
-
-	return ret;
-}
-
-
-static int lme2510_return_status(struct usb_device *dev)
-{
-	int ret = 0;
-	u8 *data;
-
-	data = kzalloc(10, GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	ret |= usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-			0x06, 0x80, 0x0302, 0x00, data, 0x0006, 200);
-	info("Firmware Status: %x (%x)", ret , data[2]);
-
-	ret = (ret < 0) ? -ENODEV : data[2];
-	kfree(data);
-	return ret;
-}
-
-static int lme2510_msg(struct dvb_usb_device *d,
-		u8 *wbuf, int wlen, u8 *rbuf, int rlen)
-{
-	int ret = 0;
-	struct lme2510_state *st = d->priv;
-
-	if (st->i2c_talk_onoff == 1) {
-
-		ret = lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
-
-		switch (st->tuner_config) {
-		case TUNER_LG:
-			if (wbuf[2] == 0x1c) {
-				if (wbuf[3] == 0x0e) {
-					st->signal_lock = rbuf[1];
-					if ((st->stream_on & 1) &&
-						(st->signal_lock & 0x10)) {
-						lme2510_stream_restart(d);
-						st->i2c_talk_onoff = 0;
-					}
-					msleep(80);
-				}
-			}
-			break;
-		case TUNER_S7395:
-			if (wbuf[2] == 0xd0) {
-				if (wbuf[3] == 0x24) {
-					st->signal_lock = rbuf[1];
-					if ((st->stream_on & 1) &&
-						(st->signal_lock & 0x8)) {
-						lme2510_stream_restart(d);
-						st->i2c_talk_onoff = 0;
-					}
-				}
-			}
-			break;
-		case TUNER_S0194:
-			if (wbuf[2] == 0xd0) {
-				if (wbuf[3] == 0x1b) {
-					st->signal_lock = rbuf[1];
-					if ((st->stream_on & 1) &&
-						(st->signal_lock & 0x8)) {
-						lme2510_stream_restart(d);
-						st->i2c_talk_onoff = 0;
-					}
-				}
-			}
-			break;
-		case TUNER_RS2000:
-		default:
-			break;
-		}
-	} else {
-		/* TODO rewrite this section */
-		switch (st->tuner_config) {
-		case TUNER_LG:
-			switch (wbuf[3]) {
-			case 0x0e:
-				rbuf[0] = 0x55;
-				rbuf[1] = st->signal_lock;
-				break;
-			case 0x43:
-				rbuf[0] = 0x55;
-				rbuf[1] = st->signal_level;
-				break;
-			case 0x1c:
-				rbuf[0] = 0x55;
-				rbuf[1] = st->signal_sn;
-				break;
-			case 0x15:
-			case 0x16:
-			case 0x17:
-			case 0x18:
-				rbuf[0] = 0x55;
-				rbuf[1] = 0x00;
-				break;
-			default:
-				lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
-				st->i2c_talk_onoff = 1;
-				break;
-			}
-			break;
-		case TUNER_S7395:
-			switch (wbuf[3]) {
-			case 0x10:
-				rbuf[0] = 0x55;
-				rbuf[1] = (st->signal_level & 0x80)
-						? 0 : (st->signal_level * 2);
-				break;
-			case 0x2d:
-				rbuf[0] = 0x55;
-				rbuf[1] = st->signal_sn;
-				break;
-			case 0x24:
-				rbuf[0] = 0x55;
-				rbuf[1] = st->signal_lock;
-				break;
-			case 0x2e:
-			case 0x26:
-			case 0x27:
-				rbuf[0] = 0x55;
-				rbuf[1] = 0x00;
-				break;
-			default:
-				lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
-				st->i2c_talk_onoff = 1;
-				break;
-			}
-			break;
-		case TUNER_S0194:
-			switch (wbuf[3]) {
-			case 0x18:
-				rbuf[0] = 0x55;
-				rbuf[1] = (st->signal_level & 0x80)
-						? 0 : (st->signal_level * 2);
-				break;
-			case 0x24:
-				rbuf[0] = 0x55;
-				rbuf[1] = st->signal_sn;
-				break;
-			case 0x1b:
-				rbuf[0] = 0x55;
-				rbuf[1] = st->signal_lock;
-				break;
-			case 0x19:
-			case 0x25:
-			case 0x1e:
-			case 0x1d:
-				rbuf[0] = 0x55;
-				rbuf[1] = 0x00;
-				break;
-			default:
-				lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
-				st->i2c_talk_onoff = 1;
-				break;
-			}
-			break;
-		case TUNER_RS2000:
-			switch (wbuf[3]) {
-			case 0x8c:
-				rbuf[0] = 0x55;
-				rbuf[1] = 0xff;
-				if (st->last_key == st->time_key) {
-					st->key_timeout++;
-					if (st->key_timeout > 5)
-						rbuf[1] = 0;
-				} else
-					st->key_timeout = 0;
-				st->last_key = st->time_key;
-				break;
-			default:
-				lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
-				st->i2c_talk_onoff = 1;
-				break;
-			}
-		default:
-			break;
-		}
-
-		deb_info(4, "I2C From Interrupt Message out(%02x) in(%02x)",
-				wbuf[3], rbuf[1]);
-
-	}
-
-	return ret;
-}
-
-
-static int lme2510_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
-				 int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	struct lme2510_state *st = d->priv;
-	static u8 obuf[64], ibuf[64];
-	int i, read, read_o;
-	u16 len;
-	u8 gate = st->i2c_gate;
-
-	mutex_lock(&d->i2c_mutex);
-
-	if (gate == 0)
-		gate = 5;
-
-	if (num > 2)
-		warn("more than 2 i2c messages"
-			"at a time is not handled yet.	TODO.");
-
-	for (i = 0; i < num; i++) {
-		read_o = 1 & (msg[i].flags & I2C_M_RD);
-		read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
-		read |= read_o;
-		gate = (msg[i].addr == st->i2c_tuner_addr)
-			? (read)	? st->i2c_tuner_gate_r
-					: st->i2c_tuner_gate_w
-			: st->i2c_gate;
-		obuf[0] = gate | (read << 7);
-
-		if (gate == 5)
-			obuf[1] = (read) ? 2 : msg[i].len + 1;
-		else
-			obuf[1] = msg[i].len + read + 1;
-
-		obuf[2] = msg[i].addr;
-		if (read) {
-			if (read_o)
-				len = 3;
-			else {
-				memcpy(&obuf[3], msg[i].buf, msg[i].len);
-				obuf[msg[i].len+3] = msg[i+1].len;
-				len = msg[i].len+4;
-			}
-		} else {
-			memcpy(&obuf[3], msg[i].buf, msg[i].len);
-			len = msg[i].len+3;
-		}
-
-		if (lme2510_msg(d, obuf, len, ibuf, 64) < 0) {
-			deb_info(1, "i2c transfer failed.");
-			mutex_unlock(&d->i2c_mutex);
-			return -EAGAIN;
-		}
-
-		if (read) {
-			if (read_o)
-				memcpy(msg[i].buf, &ibuf[1], msg[i].len);
-			else {
-				memcpy(msg[i+1].buf, &ibuf[1], msg[i+1].len);
-				i++;
-			}
-		}
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-	return i;
-}
-
-static u32 lme2510_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm lme2510_i2c_algo = {
-	.master_xfer   = lme2510_i2c_xfer,
-	.functionality = lme2510_i2c_func,
-};
-
-/* Callbacks for DVB USB */
-static int lme2510_identify_state(struct usb_device *udev,
-		struct dvb_usb_device_properties *props,
-		struct dvb_usb_device_description **desc,
-		int *cold)
-{
-	if (pid_filter != 2)
-		props->adapter[0].fe[0].caps &=
-			~DVB_USB_ADAP_NEED_PID_FILTERING;
-	*cold = 0;
-	return 0;
-}
-
-static int lme2510_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	struct lme2510_state *st = adap->dev->priv;
-	static u8 clear_reg_3[] = LME_ALL_PIDS;
-	static u8 rbuf[1];
-	int ret = 0, rlen = sizeof(rbuf);
-
-	deb_info(1, "STM  (%02x)", onoff);
-
-	/* Streaming is started by FE_HAS_LOCK */
-	if (onoff == 1)
-		st->stream_on = 1;
-	else {
-		deb_info(1, "STM Steam Off");
-		/* mutex is here only to avoid collision with I2C */
-		mutex_lock(&adap->dev->i2c_mutex);
-
-		ret = lme2510_usb_talk(adap->dev, clear_reg_3,
-				sizeof(clear_reg_3), rbuf, rlen);
-		st->stream_on = 0;
-		st->i2c_talk_onoff = 1;
-
-		mutex_unlock(&adap->dev->i2c_mutex);
-	}
-
-	return (ret < 0) ? -ENODEV : 0;
-}
-
-static u8 check_sum(u8 *p, u8 len)
-{
-	u8 sum = 0;
-	while (len--)
-		sum += *p++;
-	return sum;
-}
-
-static int lme2510_download_firmware(struct usb_device *dev,
-					const struct firmware *fw)
-{
-	int ret = 0;
-	u8 *data;
-	u16 j, wlen, len_in, start, end;
-	u8 packet_size, dlen, i;
-	u8 *fw_data;
-
-	packet_size = 0x31;
-	len_in = 1;
-
-	data = kzalloc(512, GFP_KERNEL);
-	if (!data) {
-		info("FRM Could not start Firmware Download (Buffer allocation failed)");
-		return -ENOMEM;
-	}
-
-	info("FRM Starting Firmware Download");
-
-	for (i = 1; i < 3; i++) {
-		start = (i == 1) ? 0 : 512;
-		end = (i == 1) ? 512 : fw->size;
-		for (j = start; j < end; j += (packet_size+1)) {
-			fw_data = (u8 *)(fw->data + j);
-			if ((end - j) > packet_size) {
-				data[0] = i;
-				dlen = packet_size;
-			} else {
-				data[0] = i | 0x80;
-				dlen = (u8)(end - j)-1;
-			}
-			data[1] = dlen;
-			memcpy(&data[2], fw_data, dlen+1);
-			wlen = (u8) dlen + 4;
-			data[wlen-1] = check_sum(fw_data, dlen+1);
-			deb_info(1, "Data S=%02x:E=%02x CS= %02x", data[3],
-				data[dlen+2], data[dlen+3]);
-			ret |= lme2510_bulk_write(dev, data,  wlen, 1);
-			ret |= lme2510_bulk_read(dev, data, len_in , 1);
-			ret |= (data[0] == 0x88) ? 0 : -1;
-		}
-	}
-
-	usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-			0x06, 0x80, 0x0200, 0x00, data, 0x0109, 1000);
-
-
-	data[0] = 0x8a;
-	len_in = 1;
-	msleep(2000);
-	ret |= lme2510_bulk_write(dev, data , len_in, 1); /*Resetting*/
-	ret |= lme2510_bulk_read(dev, data, len_in, 1);
-	msleep(400);
-
-	if (ret < 0)
-		info("FRM Firmware Download Failed (%04x)" , ret);
-	else
-		info("FRM Firmware Download Completed - Resetting Device");
-
-	kfree(data);
-	return (ret < 0) ? -ENODEV : 0;
-}
-
-static void lme_coldreset(struct usb_device *dev)
-{
-	int ret = 0, len_in;
-	u8 data[512] = {0};
-
-	data[0] = 0x0a;
-	len_in = 1;
-	info("FRM Firmware Cold Reset");
-	ret |= lme2510_bulk_write(dev, data , len_in, 1); /*Cold Resetting*/
-	ret |= lme2510_bulk_read(dev, data, len_in, 1);
-
-	return;
-}
-
-static int lme_firmware_switch(struct usb_device *udev, int cold)
-{
-	const struct firmware *fw = NULL;
-	const char fw_c_s7395[] = "dvb-usb-lme2510c-s7395.fw";
-	const char fw_c_lg[] = "dvb-usb-lme2510c-lg.fw";
-	const char fw_c_s0194[] = "dvb-usb-lme2510c-s0194.fw";
-	const char fw_c_rs2000[] = "dvb-usb-lme2510c-rs2000.fw";
-	const char fw_lg[] = "dvb-usb-lme2510-lg.fw";
-	const char fw_s0194[] = "dvb-usb-lme2510-s0194.fw";
-	const char *fw_lme;
-	int ret = 0, cold_fw;
-
-	cold = (cold > 0) ? (cold & 1) : 0;
-
-	cold_fw = !cold;
-
-	switch (le16_to_cpu(udev->descriptor.idProduct)) {
-	case 0x1122:
-		switch (dvb_usb_lme2510_firmware) {
-		default:
-			dvb_usb_lme2510_firmware = TUNER_S0194;
-		case TUNER_S0194:
-			fw_lme = fw_s0194;
-			ret = request_firmware(&fw, fw_lme, &udev->dev);
-			if (ret == 0) {
-				cold = 0;
-				break;
-			}
-			dvb_usb_lme2510_firmware = TUNER_LG;
-		case TUNER_LG:
-			fw_lme = fw_lg;
-			ret = request_firmware(&fw, fw_lme, &udev->dev);
-			if (ret == 0)
-				break;
-			info("FRM No Firmware Found - please install");
-			dvb_usb_lme2510_firmware = TUNER_DEFAULT;
-			cold = 0;
-			cold_fw = 0;
-			break;
-		}
-		break;
-	case 0x1120:
-		switch (dvb_usb_lme2510_firmware) {
-		default:
-			dvb_usb_lme2510_firmware = TUNER_S7395;
-		case TUNER_S7395:
-			fw_lme = fw_c_s7395;
-			ret = request_firmware(&fw, fw_lme, &udev->dev);
-			if (ret == 0) {
-				cold = 0;
-				break;
-			}
-			dvb_usb_lme2510_firmware = TUNER_LG;
-		case TUNER_LG:
-			fw_lme = fw_c_lg;
-			ret = request_firmware(&fw, fw_lme, &udev->dev);
-			if (ret == 0)
-				break;
-			dvb_usb_lme2510_firmware = TUNER_S0194;
-		case TUNER_S0194:
-			fw_lme = fw_c_s0194;
-			ret = request_firmware(&fw, fw_lme, &udev->dev);
-			if (ret == 0)
-				break;
-			info("FRM No Firmware Found - please install");
-			dvb_usb_lme2510_firmware = TUNER_DEFAULT;
-			cold = 0;
-			cold_fw = 0;
-			break;
-		}
-		break;
-	case 0x22f0:
-		fw_lme = fw_c_rs2000;
-		ret = request_firmware(&fw, fw_lme, &udev->dev);
-		dvb_usb_lme2510_firmware = TUNER_RS2000;
-		break;
-	default:
-		fw_lme = fw_c_s7395;
-	}
-
-
-	if (cold_fw) {
-		info("FRM Loading %s file", fw_lme);
-		ret = lme2510_download_firmware(udev, fw);
-	}
-
-	release_firmware(fw);
-
-	if (cold) {
-		info("FRM Changing to %s firmware", fw_lme);
-		lme_coldreset(udev);
-		return -ENODEV;
-	}
-
-	return ret;
-}
-
-static int lme2510_kill_urb(struct usb_data_stream *stream)
-{
-	int i;
-
-	for (i = 0; i < stream->urbs_submitted; i++) {
-		deb_info(3, "killing URB no. %d.", i);
-		/* stop the URB */
-		usb_kill_urb(stream->urb_list[i]);
-	}
-	stream->urbs_submitted = 0;
-
-	return 0;
-}
-
-static struct tda10086_config tda10086_config = {
-	.demod_address = 0x1c,
-	.invert = 0,
-	.diseqc_tone = 1,
-	.xtal_freq = TDA10086_XTAL_16M,
-};
-
-static struct stv0288_config lme_config = {
-	.demod_address = 0xd0,
-	.min_delay_ms = 15,
-	.inittab = s7395_inittab,
-};
-
-static struct ix2505v_config lme_tuner = {
-	.tuner_address = 0xc0,
-	.min_delay_ms = 100,
-	.tuner_gain = 0x0,
-	.tuner_chargepump = 0x3,
-};
-
-static struct stv0299_config sharp_z0194_config = {
-	.demod_address = 0xd0,
-	.inittab = sharp_z0194a_inittab,
-	.mclk = 88000000UL,
-	.invert = 0,
-	.skip_reinit = 0,
-	.lock_output = STV0299_LOCKOUTPUT_1,
-	.volt13_op0_op1 = STV0299_VOLT13_OP1,
-	.min_delay_ms = 100,
-	.set_symbol_rate = sharp_z0194a_set_symbol_rate,
-};
-
-static int dm04_rs2000_set_ts_param(struct dvb_frontend *fe,
-	int caller)
-{
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct dvb_usb_device *d = adap->dev;
-	struct lme2510_state *st = d->priv;
-
-	mutex_lock(&d->i2c_mutex);
-	if ((st->i2c_talk_onoff == 1) && (st->stream_on & 1)) {
-		st->i2c_talk_onoff = 0;
-		lme2510_stream_restart(d);
-	}
-	mutex_unlock(&d->i2c_mutex);
-
-	return 0;
-}
-
-static struct m88rs2000_config m88rs2000_config = {
-	.demod_addr = 0xd0,
-	.tuner_addr = 0xc0,
-	.set_ts_params = dm04_rs2000_set_ts_param,
-};
-
-static int dm04_lme2510_set_voltage(struct dvb_frontend *fe,
-					fe_sec_voltage_t voltage)
-{
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	static u8 voltage_low[]	= LME_VOLTAGE_L;
-	static u8 voltage_high[] = LME_VOLTAGE_H;
-	static u8 rbuf[1];
-	int ret = 0, len = 3, rlen = 1;
-
-	mutex_lock(&adap->dev->i2c_mutex);
-
-	switch (voltage) {
-	case SEC_VOLTAGE_18:
-		ret |= lme2510_usb_talk(adap->dev,
-			voltage_high, len, rbuf, rlen);
-		break;
-
-	case SEC_VOLTAGE_OFF:
-	case SEC_VOLTAGE_13:
-	default:
-		ret |= lme2510_usb_talk(adap->dev,
-				voltage_low, len, rbuf, rlen);
-		break;
-	}
-
-	mutex_unlock(&adap->dev->i2c_mutex);
-
-	return (ret < 0) ? -ENODEV : 0;
-}
-
-static int dm04_rs2000_read_signal_strength(struct dvb_frontend *fe,
-	u16 *strength)
-{
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct lme2510_state *st = adap->dev->priv;
-
-	*strength = (u16)((u32)st->signal_level * 0xffff / 0x7f);
-	return 0;
-}
-
-static int dm04_rs2000_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct lme2510_state *st = adap->dev->priv;
-
-	*snr = (u16)((u32)st->signal_sn * 0xffff / 0xff);
-	return 0;
-}
-
-static int lme_name(struct dvb_usb_adapter *adap)
-{
-	struct lme2510_state *st = adap->dev->priv;
-	const char *desc = adap->dev->desc->name;
-	char *fe_name[] = {"", " LG TDQY-P001F", " SHARP:BS2F7HZ7395",
-				" SHARP:BS2F7HZ0194", " RS2000"};
-	char *name = adap->fe_adap[0].fe->ops.info.name;
-
-	strlcpy(name, desc, 128);
-	strlcat(name, fe_name[st->tuner_config], 128);
-
-	return 0;
-}
-
-static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct lme2510_state *st = adap->dev->priv;
-
-	int ret = 0;
-
-	st->i2c_talk_onoff = 1;
-	switch (le16_to_cpu(adap->dev->udev->descriptor.idProduct)) {
-	case 0x1122:
-	case 0x1120:
-		st->i2c_gate = 4;
-		adap->fe_adap[0].fe = dvb_attach(tda10086_attach,
-			&tda10086_config, &adap->dev->i2c_adap);
-		if (adap->fe_adap[0].fe) {
-			info("TUN Found Frontend TDA10086");
-			st->i2c_tuner_gate_w = 4;
-			st->i2c_tuner_gate_r = 4;
-			st->i2c_tuner_addr = 0xc0;
-			st->tuner_config = TUNER_LG;
-			if (dvb_usb_lme2510_firmware != TUNER_LG) {
-				dvb_usb_lme2510_firmware = TUNER_LG;
-				ret = lme_firmware_switch(adap->dev->udev, 1);
-			}
-			break;
-		}
-
-		st->i2c_gate = 4;
-		adap->fe_adap[0].fe = dvb_attach(stv0299_attach,
-				&sharp_z0194_config, &adap->dev->i2c_adap);
-		if (adap->fe_adap[0].fe) {
-			info("FE Found Stv0299");
-			st->i2c_tuner_gate_w = 4;
-			st->i2c_tuner_gate_r = 5;
-			st->i2c_tuner_addr = 0xc0;
-			st->tuner_config = TUNER_S0194;
-			if (dvb_usb_lme2510_firmware != TUNER_S0194) {
-				dvb_usb_lme2510_firmware = TUNER_S0194;
-				ret = lme_firmware_switch(adap->dev->udev, 1);
-			}
-			break;
-		}
-
-		st->i2c_gate = 5;
-		adap->fe_adap[0].fe = dvb_attach(stv0288_attach, &lme_config,
-			&adap->dev->i2c_adap);
-
-		if (adap->fe_adap[0].fe) {
-			info("FE Found Stv0288");
-			st->i2c_tuner_gate_w = 4;
-			st->i2c_tuner_gate_r = 5;
-			st->i2c_tuner_addr = 0xc0;
-			st->tuner_config = TUNER_S7395;
-			if (dvb_usb_lme2510_firmware != TUNER_S7395) {
-				dvb_usb_lme2510_firmware = TUNER_S7395;
-				ret = lme_firmware_switch(adap->dev->udev, 1);
-			}
-			break;
-		}
-	case 0x22f0:
-		st->i2c_gate = 5;
-		adap->fe_adap[0].fe = dvb_attach(m88rs2000_attach,
-			&m88rs2000_config, &adap->dev->i2c_adap);
-
-		if (adap->fe_adap[0].fe) {
-			info("FE Found M88RS2000");
-			st->i2c_tuner_gate_w = 5;
-			st->i2c_tuner_gate_r = 5;
-			st->i2c_tuner_addr = 0xc0;
-			st->tuner_config = TUNER_RS2000;
-			adap->fe_adap[0].fe->ops.read_signal_strength =
-				dm04_rs2000_read_signal_strength;
-			adap->fe_adap[0].fe->ops.read_snr =
-				dm04_rs2000_read_snr;
-		}
-		break;
-	}
-
-	if (adap->fe_adap[0].fe == NULL) {
-			info("DM04/QQBOX Not Powered up or not Supported");
-			return -ENODEV;
-	}
-
-	if (ret) {
-		if (adap->fe_adap[0].fe) {
-			dvb_frontend_detach(adap->fe_adap[0].fe);
-			adap->fe_adap[0].fe = NULL;
-		}
-		adap->dev->props.rc.core.rc_codes = NULL;
-		return -ENODEV;
-	}
-
-	adap->fe_adap[0].fe->ops.set_voltage = dm04_lme2510_set_voltage;
-	ret = lme_name(adap);
-	return ret;
-}
-
-static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap)
-{
-	struct lme2510_state *st = adap->dev->priv;
-	char *tun_msg[] = {"", "TDA8263", "IX2505V", "DVB_PLL_OPERA", "RS2000"};
-	int ret = 0;
-
-	switch (st->tuner_config) {
-	case TUNER_LG:
-		if (dvb_attach(tda826x_attach, adap->fe_adap[0].fe, 0xc0,
-			&adap->dev->i2c_adap, 1))
-			ret = st->tuner_config;
-		break;
-	case TUNER_S7395:
-		if (dvb_attach(ix2505v_attach , adap->fe_adap[0].fe, &lme_tuner,
-			&adap->dev->i2c_adap))
-			ret = st->tuner_config;
-		break;
-	case TUNER_S0194:
-		if (dvb_attach(dvb_pll_attach , adap->fe_adap[0].fe, 0xc0,
-			&adap->dev->i2c_adap, DVB_PLL_OPERA1))
-			ret = st->tuner_config;
-		break;
-	case TUNER_RS2000:
-		ret = st->tuner_config;
-		break;
-	default:
-		break;
-	}
-
-	if (ret)
-		info("TUN Found %s tuner", tun_msg[ret]);
-	else {
-		info("TUN No tuner found --- resetting device");
-		lme_coldreset(adap->dev->udev);
-		return -ENODEV;
-	}
-
-	/* Start the Interrupt*/
-	ret = lme2510_int_read(adap);
-	if (ret < 0) {
-		info("INT Unable to start Interrupt Service");
-		return -ENODEV;
-	}
-
-	return ret;
-}
-
-static int lme2510_powerup(struct dvb_usb_device *d, int onoff)
-{
-	struct lme2510_state *st = d->priv;
-	static u8 lnb_on[] = LNB_ON;
-	static u8 lnb_off[] = LNB_OFF;
-	static u8 rbuf[1];
-	int ret = 0, len = 3, rlen = 1;
-
-	mutex_lock(&d->i2c_mutex);
-
-	if (onoff)
-		ret = lme2510_usb_talk(d, lnb_on, len, rbuf, rlen);
-	else
-		ret = lme2510_usb_talk(d, lnb_off, len, rbuf, rlen);
-
-	st->i2c_talk_onoff = 1;
-
-	mutex_unlock(&d->i2c_mutex);
-
-	return ret;
-}
-
-/* DVB USB Driver stuff */
-static struct dvb_usb_device_properties lme2510_properties;
-static struct dvb_usb_device_properties lme2510c_properties;
-
-static int lme2510_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev(intf);
-
-	usb_reset_configuration(udev);
-
-	usb_set_interface(udev, intf->cur_altsetting->desc.bInterfaceNumber, 1);
-
-	if (udev->speed != USB_SPEED_HIGH) {
-		usb_reset_device(udev);
-		info("DEV Failed to connect in HIGH SPEED mode");
-		return -ENODEV;
-	}
-
-	if (lme2510_return_status(udev) == 0x44) {
-		lme_firmware_switch(udev, 0);
-		return -ENODEV;
-	}
-
-	if (0 == dvb_usb_device_init(intf, &lme2510_properties,
-				     THIS_MODULE, NULL, adapter_nr)) {
-		info("DEV registering device driver");
-		return 0;
-	}
-	if (0 == dvb_usb_device_init(intf, &lme2510c_properties,
-				     THIS_MODULE, NULL, adapter_nr)) {
-		info("DEV registering device driver");
-		return 0;
-	}
-
-	info("DEV lme2510 Error");
-	return -ENODEV;
-
-}
-
-static struct usb_device_id lme2510_table[] = {
-	{ USB_DEVICE(0x3344, 0x1122) },  /* LME2510 */
-	{ USB_DEVICE(0x3344, 0x1120) },  /* LME2510C */
-	{ USB_DEVICE(0x3344, 0x22f0) },  /* LME2510C RS2000 */
-	{}		/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, lme2510_table);
-
-static struct dvb_usb_device_properties lme2510_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-	.size_of_priv = sizeof(struct lme2510_state),
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.caps = DVB_USB_ADAP_HAS_PID_FILTER|
-				DVB_USB_ADAP_NEED_PID_FILTERING|
-				DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-			.streaming_ctrl   = lme2510_streaming_ctrl,
-			.pid_filter_count = 32,
-			.pid_filter = lme2510_pid_filter,
-			.pid_filter_ctrl  = lme2510_pid_filter_ctrl,
-			.frontend_attach  = dm04_lme2510_frontend_attach,
-			.tuner_attach = dm04_lme2510_tuner,
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 10,
-				.endpoint = 0x06,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-
-					}
-				}
-			}
-		}},
-		}
-	},
-	.rc.core = {
-		.protocol	= RC_TYPE_NEC,
-		.module_name	= "LME2510 Remote Control",
-		.allowed_protos	= RC_TYPE_NEC,
-		.rc_codes	= RC_MAP_LME2510,
-	},
-	.power_ctrl       = lme2510_powerup,
-	.identify_state   = lme2510_identify_state,
-	.i2c_algo         = &lme2510_i2c_algo,
-	.generic_bulk_ctrl_endpoint = 0,
-	.num_device_descs = 1,
-	.devices = {
-		{   "DM04_LME2510_DVB-S",
-			{ &lme2510_table[0], NULL },
-			},
-
-	}
-};
-
-static struct dvb_usb_device_properties lme2510c_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-	.size_of_priv = sizeof(struct lme2510_state),
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.caps = DVB_USB_ADAP_HAS_PID_FILTER|
-				DVB_USB_ADAP_NEED_PID_FILTERING|
-				DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-			.streaming_ctrl   = lme2510_streaming_ctrl,
-			.pid_filter_count = 32,
-			.pid_filter = lme2510_pid_filter,
-			.pid_filter_ctrl  = lme2510_pid_filter_ctrl,
-			.frontend_attach  = dm04_lme2510_frontend_attach,
-			.tuner_attach = dm04_lme2510_tuner,
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 10,
-				.endpoint = 0x8,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-
-					}
-				}
-			}
-		}},
-		}
-	},
-	.rc.core = {
-		.protocol	= RC_TYPE_NEC,
-		.module_name	= "LME2510 Remote Control",
-		.allowed_protos	= RC_TYPE_NEC,
-		.rc_codes	= RC_MAP_LME2510,
-	},
-	.power_ctrl       = lme2510_powerup,
-	.identify_state   = lme2510_identify_state,
-	.i2c_algo         = &lme2510_i2c_algo,
-	.generic_bulk_ctrl_endpoint = 0,
-	.num_device_descs = 2,
-	.devices = {
-		{   "DM04_LME2510C_DVB-S",
-			{ &lme2510_table[1], NULL },
-			},
-		{   "DM04_LME2510C_DVB-S RS2000",
-			{ &lme2510_table[2], NULL },
-			},
-	}
-};
-
-static void *lme2510_exit_int(struct dvb_usb_device *d)
-{
-	struct lme2510_state *st = d->priv;
-	struct dvb_usb_adapter *adap = &d->adapter[0];
-	void *buffer = NULL;
-
-	if (adap != NULL) {
-		lme2510_kill_urb(&adap->fe_adap[0].stream);
-		adap->feedcount = 0;
-	}
-
-	if (st->usb_buffer != NULL) {
-		st->i2c_talk_onoff = 1;
-		st->signal_lock = 0;
-		st->signal_level = 0;
-		st->signal_sn = 0;
-		buffer = st->usb_buffer;
-	}
-
-	if (st->lme_urb != NULL) {
-		usb_kill_urb(st->lme_urb);
-		usb_free_coherent(d->udev, 128, st->buffer,
-				  st->lme_urb->transfer_dma);
-		info("Interrupt Service Stopped");
-	}
-
-	return buffer;
-}
-
-static void lme2510_exit(struct usb_interface *intf)
-{
-	struct dvb_usb_device *d = usb_get_intfdata(intf);
-	void *usb_buffer;
-
-	if (d != NULL) {
-		usb_buffer = lme2510_exit_int(d);
-		dvb_usb_device_exit(intf);
-		if (usb_buffer != NULL)
-			kfree(usb_buffer);
-	}
-}
-
-static struct usb_driver lme2510_driver = {
-	.name		= "LME2510C_DVB-S",
-	.probe		= lme2510_probe,
-	.disconnect	= lme2510_exit,
-	.id_table	= lme2510_table,
-};
-
-module_usb_driver(lme2510_driver);
-
-MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
-MODULE_DESCRIPTION("LME2510(C) DVB-S USB2.0");
-MODULE_VERSION("1.99");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/lmedm04.h b/drivers/media/dvb/dvb-usb/lmedm04.h
deleted file mode 100644
index e9c2072..0000000
--- a/drivers/media/dvb/dvb-usb/lmedm04.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/* DVB USB compliant linux driver for
- *
- * DM04/QQBOX DVB-S USB BOX	LME2510C + SHARP:BS2F7HZ7395
- *				LME2510C + LG TDQY-P001F
- *				LME2510 + LG TDQY-P001F
- *
- * MVB7395 (LME2510C+SHARP:BS2F7HZ7395)
- * SHARP:BS2F7HZ7395 = (STV0288+Sharp IX2505V)
- *
- * MVB001F (LME2510+LGTDQT-P001F)
- * LG TDQY - P001F =(TDA8263 + TDA10086H)
- *
- * MVB0001F (LME2510C+LGTDQT-P001F)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation,  version 2.
- * *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#ifndef _DVB_USB_LME2510_H_
-#define _DVB_USB_LME2510_H_
-
-/* Streamer &  PID
- *
- * Note:	These commands do not actually stop the streaming
- *		but form some kind of packet filtering/stream count
- *		or tuning related functions.
- *  06 XX
- *  offset 1 = 00 Enable Streaming
- *
- *
- *  PID
- *  03 XX XX  ----> reg number ---> setting....20 XX
- *  offset 1 = length
- *  offset 2 = start of data
- *  end byte -1 = 20
- *  end byte = clear pid always a0, other wise 9c, 9a ??
- *
-*/
-#define LME_ST_ON_W	{0x06, 0x00}
-#define LME_CLEAR_PID   {0x03, 0x02, 0x20, 0xa0}
-#define LME_ZERO_PID	{0x03, 0x06, 0x00, 0x00, 0x01, 0x00, 0x20, 0x9c}
-#define LME_ALL_PIDS	{0x03, 0x06, 0x00, 0xff, 0x01, 0x1f, 0x20, 0x81}
-
-/*  LNB Voltage
- *  07 XX XX
- *  offset 1 = 01
- *  offset 2 = 00=Voltage low 01=Voltage high
- *
- *  LNB Power
- *  03 01 XX
- *  offset 2 = 00=ON 01=OFF
- */
-
-#define LME_VOLTAGE_L	{0x07, 0x01, 0x00}
-#define LME_VOLTAGE_H	{0x07, 0x01, 0x01}
-#define LNB_ON		{0x3a, 0x01, 0x00}
-#define LNB_OFF		{0x3a, 0x01, 0x01}
-
-/* Initial stv0288 settings for 7395 Frontend */
-static u8 s7395_inittab[] = {
-	0x01, 0x15,
-	0x02, 0x20,
-	0x03, 0xa0,
-	0x04, 0xa0,
-	0x05, 0x12,
-	0x06, 0x00,
-	0x09, 0x00,
-	0x0a, 0x04,
-	0x0b, 0x00,
-	0x0c, 0x00,
-	0x0d, 0x00,
-	0x0e, 0xc1,
-	0x0f, 0x54,
-	0x11, 0x7a,
-	0x12, 0x03,
-	0x13, 0x48,
-	0x14, 0x84,
-	0x15, 0xc5,
-	0x16, 0xb8,
-	0x17, 0x9c,
-	0x18, 0x00,
-	0x19, 0xa6,
-	0x1a, 0x88,
-	0x1b, 0x8f,
-	0x1c, 0xf0,
-	0x20, 0x0b,
-	0x21, 0x54,
-	0x22, 0xff,
-	0x23, 0x01,
-	0x28, 0x46,
-	0x29, 0x66,
-	0x2a, 0x90,
-	0x2b, 0xfa,
-	0x2c, 0xd9,
-	0x30, 0x0,
-	0x31, 0x1e,
-	0x32, 0x14,
-	0x33, 0x0f,
-	0x34, 0x09,
-	0x35, 0x0c,
-	0x36, 0x05,
-	0x37, 0x2f,
-	0x38, 0x16,
-	0x39, 0xbd,
-	0x3a, 0x0,
-	0x3b, 0x13,
-	0x3c, 0x11,
-	0x3d, 0x30,
-	0x40, 0x63,
-	0x41, 0x04,
-	0x42, 0x20,
-	0x43, 0x00,
-	0x44, 0x00,
-	0x45, 0x00,
-	0x46, 0x00,
-	0x47, 0x00,
-	0x4a, 0x00,
-	0x50, 0x10,
-	0x51, 0x36,
-	0x52, 0x21,
-	0x53, 0x94,
-	0x54, 0xb2,
-	0x55, 0x29,
-	0x56, 0x64,
-	0x57, 0x2b,
-	0x58, 0x54,
-	0x59, 0x86,
-	0x5a, 0x00,
-	0x5b, 0x9b,
-	0x5c, 0x08,
-	0x5d, 0x7f,
-	0x5e, 0xff,
-	0x5f, 0x8d,
-	0x70, 0x0,
-	0x71, 0x0,
-	0x72, 0x0,
-	0x74, 0x0,
-	0x75, 0x0,
-	0x76, 0x0,
-	0x81, 0x0,
-	0x82, 0x3f,
-	0x83, 0x3f,
-	0x84, 0x0,
-	0x85, 0x0,
-	0x88, 0x0,
-	0x89, 0x0,
-	0x8a, 0x0,
-	0x8b, 0x0,
-	0x8c, 0x0,
-	0x90, 0x0,
-	0x91, 0x0,
-	0x92, 0x0,
-	0x93, 0x0,
-	0x94, 0x1c,
-	0x97, 0x0,
-	0xa0, 0x48,
-	0xa1, 0x0,
-	0xb0, 0xb8,
-	0xb1, 0x3a,
-	0xb2, 0x10,
-	0xb3, 0x82,
-	0xb4, 0x80,
-	0xb5, 0x82,
-	0xb6, 0x82,
-	0xb7, 0x82,
-	0xb8, 0x20,
-	0xb9, 0x0,
-	0xf0, 0x0,
-	0xf1, 0x0,
-	0xf2, 0xc0,
-	0xff, 0xff,
-};
-#endif
diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c
deleted file mode 100644
index 288af29..0000000
--- a/drivers/media/dvb/dvb-usb/m920x.c
+++ /dev/null
@@ -1,1099 +0,0 @@
-/* DVB USB compliant linux driver for MSI Mega Sky 580 DVB-T USB2.0 receiver
- *
- * Copyright (C) 2006 Aapo Tahkola (aet@rasterburn.org)
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the
- *	Free Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-
-#include "m920x.h"
-
-#include "mt352.h"
-#include "mt352_priv.h"
-#include "qt1010.h"
-#include "tda1004x.h"
-#include "tda827x.h"
-
-#include <media/tuner.h>
-#include "tuner-simple.h"
-#include <asm/unaligned.h>
-
-/* debug */
-static int dvb_usb_m920x_debug;
-module_param_named(debug,dvb_usb_m920x_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS);
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static int m920x_set_filter(struct dvb_usb_device *d, int type, int idx, int pid);
-
-static inline int m920x_read(struct usb_device *udev, u8 request, u16 value,
-			     u16 index, void *data, int size)
-{
-	int ret;
-
-	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-			      request, USB_TYPE_VENDOR | USB_DIR_IN,
-			      value, index, data, size, 2000);
-	if (ret < 0) {
-		printk(KERN_INFO "m920x_read = error: %d\n", ret);
-		return ret;
-	}
-
-	if (ret != size) {
-		deb("m920x_read = no data\n");
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static inline int m920x_write(struct usb_device *udev, u8 request,
-			      u16 value, u16 index)
-{
-	int ret;
-
-	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-			      request, USB_TYPE_VENDOR | USB_DIR_OUT,
-			      value, index, NULL, 0, 2000);
-
-	return ret;
-}
-
-static int m920x_init(struct dvb_usb_device *d, struct m920x_inits *rc_seq)
-{
-	int ret = 0, i, epi, flags = 0;
-	int adap_enabled[M9206_MAX_ADAPTERS] = { 0 };
-
-	/* Remote controller init. */
-	if (d->props.rc.legacy.rc_query) {
-		deb("Initialising remote control\n");
-		while (rc_seq->address) {
-			if ((ret = m920x_write(d->udev, M9206_CORE,
-					       rc_seq->data,
-					       rc_seq->address)) != 0) {
-				deb("Initialising remote control failed\n");
-				return ret;
-			}
-
-			rc_seq++;
-		}
-
-		deb("Initialising remote control success\n");
-	}
-
-	for (i = 0; i < d->props.num_adapters; i++)
-		flags |= d->adapter[i].props.fe[0].caps;
-
-	/* Some devices(Dposh) might crash if we attempt touch at all. */
-	if (flags & DVB_USB_ADAP_HAS_PID_FILTER) {
-		for (i = 0; i < d->props.num_adapters; i++) {
-			epi = d->adapter[i].props.fe[0].stream.endpoint - 0x81;
-
-			if (epi < 0 || epi >= M9206_MAX_ADAPTERS) {
-				printk(KERN_INFO "m920x: Unexpected adapter endpoint!\n");
-				return -EINVAL;
-			}
-
-			adap_enabled[epi] = 1;
-		}
-
-		for (i = 0; i < M9206_MAX_ADAPTERS; i++) {
-			if (adap_enabled[i])
-				continue;
-
-			if ((ret = m920x_set_filter(d, 0x81 + i, 0, 0x0)) != 0)
-				return ret;
-
-			if ((ret = m920x_set_filter(d, 0x81 + i, 0, 0x02f5)) != 0)
-				return ret;
-		}
-	}
-
-	return ret;
-}
-
-static int m920x_init_ep(struct usb_interface *intf)
-{
-	struct usb_device *udev = interface_to_usbdev(intf);
-	struct usb_host_interface *alt;
-
-	if ((alt = usb_altnum_to_altsetting(intf, 1)) == NULL) {
-		deb("No alt found!\n");
-		return -ENODEV;
-	}
-
-	return usb_set_interface(udev, alt->desc.bInterfaceNumber,
-				 alt->desc.bAlternateSetting);
-}
-
-static int m920x_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
-{
-	struct m920x_state *m = d->priv;
-	int i, ret = 0;
-	u8 *rc_state;
-
-	rc_state = kmalloc(2, GFP_KERNEL);
-	if (!rc_state)
-		return -ENOMEM;
-
-	if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_STATE, rc_state, 1)) != 0)
-		goto out;
-
-	if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_KEY, rc_state + 1, 1)) != 0)
-		goto out;
-
-	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++)
-		if (rc5_data(&d->props.rc.legacy.rc_map_table[i]) == rc_state[1]) {
-			*event = d->props.rc.legacy.rc_map_table[i].keycode;
-
-			switch(rc_state[0]) {
-			case 0x80:
-				*state = REMOTE_NO_KEY_PRESSED;
-				goto out;
-
-			case 0x88: /* framing error or "invalid code" */
-			case 0x99:
-			case 0xc0:
-			case 0xd8:
-				*state = REMOTE_NO_KEY_PRESSED;
-				m->rep_count = 0;
-				goto out;
-
-			case 0x93:
-			case 0x92:
-			case 0x83: /* pinnacle PCTV310e */
-			case 0x82:
-				m->rep_count = 0;
-				*state = REMOTE_KEY_PRESSED;
-				goto out;
-
-			case 0x91:
-			case 0x81: /* pinnacle PCTV310e */
-				/* prevent immediate auto-repeat */
-				if (++m->rep_count > 2)
-					*state = REMOTE_KEY_REPEAT;
-				else
-					*state = REMOTE_NO_KEY_PRESSED;
-				goto out;
-
-			default:
-				deb("Unexpected rc state %02x\n", rc_state[0]);
-				*state = REMOTE_NO_KEY_PRESSED;
-				goto out;
-			}
-		}
-
-	if (rc_state[1] != 0)
-		deb("Unknown rc key %02x\n", rc_state[1]);
-
-	*state = REMOTE_NO_KEY_PRESSED;
-
- out:
-	kfree(rc_state);
-	return ret;
-}
-
-/* I2C */
-static int m920x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	int i, j;
-	int ret = 0;
-
-	if (!num)
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	for (i = 0; i < num; i++) {
-		if (msg[i].flags & (I2C_M_NO_RD_ACK | I2C_M_IGNORE_NAK | I2C_M_TEN) || msg[i].len == 0) {
-			/* For a 0 byte message, I think sending the address
-			 * to index 0x80|0x40 would be the correct thing to
-			 * do.  However, zero byte messages are only used for
-			 * probing, and since we don't know how to get the
-			 * slave's ack, we can't probe. */
-			ret = -ENOTSUPP;
-			goto unlock;
-		}
-		/* Send START & address/RW bit */
-		if (!(msg[i].flags & I2C_M_NOSTART)) {
-			if ((ret = m920x_write(d->udev, M9206_I2C,
-					(msg[i].addr << 1) |
-					(msg[i].flags & I2C_M_RD ? 0x01 : 0), 0x80)) != 0)
-				goto unlock;
-			/* Should check for ack here, if we knew how. */
-		}
-		if (msg[i].flags & I2C_M_RD) {
-			for (j = 0; j < msg[i].len; j++) {
-				/* Last byte of transaction?
-				 * Send STOP, otherwise send ACK. */
-				int stop = (i+1 == num && j+1 == msg[i].len) ? 0x40 : 0x01;
-
-				if ((ret = m920x_read(d->udev, M9206_I2C, 0x0,
-						      0x20 | stop,
-						      &msg[i].buf[j], 1)) != 0)
-					goto unlock;
-			}
-		} else {
-			for (j = 0; j < msg[i].len; j++) {
-				/* Last byte of transaction? Then send STOP. */
-				int stop = (i+1 == num && j+1 == msg[i].len) ? 0x40 : 0x00;
-
-				if ((ret = m920x_write(d->udev, M9206_I2C, msg[i].buf[j], stop)) != 0)
-					goto unlock;
-				/* Should check for ack here too. */
-			}
-		}
-	}
-	ret = num;
-
- unlock:
-	mutex_unlock(&d->i2c_mutex);
-
-	return ret;
-}
-
-static u32 m920x_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm m920x_i2c_algo = {
-	.master_xfer   = m920x_i2c_xfer,
-	.functionality = m920x_i2c_func,
-};
-
-/* pid filter */
-static int m920x_set_filter(struct dvb_usb_device *d, int type, int idx, int pid)
-{
-	int ret = 0;
-
-	if (pid >= 0x8000)
-		return -EINVAL;
-
-	pid |= 0x8000;
-
-	if ((ret = m920x_write(d->udev, M9206_FILTER, pid, (type << 8) | (idx * 4) )) != 0)
-		return ret;
-
-	if ((ret = m920x_write(d->udev, M9206_FILTER, 0, (type << 8) | (idx * 4) )) != 0)
-		return ret;
-
-	return ret;
-}
-
-static int m920x_update_filters(struct dvb_usb_adapter *adap)
-{
-	struct m920x_state *m = adap->dev->priv;
-	int enabled = m->filtering_enabled[adap->id];
-	int i, ret = 0, filter = 0;
-	int ep = adap->props.fe[0].stream.endpoint;
-
-	for (i = 0; i < M9206_MAX_FILTERS; i++)
-		if (m->filters[adap->id][i] == 8192)
-			enabled = 0;
-
-	/* Disable all filters */
-	if ((ret = m920x_set_filter(adap->dev, ep, 1, enabled)) != 0)
-		return ret;
-
-	for (i = 0; i < M9206_MAX_FILTERS; i++)
-		if ((ret = m920x_set_filter(adap->dev, ep, i + 2, 0)) != 0)
-			return ret;
-
-	/* Set */
-	if (enabled) {
-		for (i = 0; i < M9206_MAX_FILTERS; i++) {
-			if (m->filters[adap->id][i] == 0)
-				continue;
-
-			if ((ret = m920x_set_filter(adap->dev, ep, filter + 2, m->filters[adap->id][i])) != 0)
-				return ret;
-
-			filter++;
-		}
-	}
-
-	return ret;
-}
-
-static int m920x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	struct m920x_state *m = adap->dev->priv;
-
-	m->filtering_enabled[adap->id] = onoff ? 1 : 0;
-
-	return m920x_update_filters(adap);
-}
-
-static int m920x_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff)
-{
-	struct m920x_state *m = adap->dev->priv;
-
-	m->filters[adap->id][index] = onoff ? pid : 0;
-
-	return m920x_update_filters(adap);
-}
-
-static int m920x_firmware_download(struct usb_device *udev, const struct firmware *fw)
-{
-	u16 value, index, size;
-	u8 *read, *buff;
-	int i, pass, ret = 0;
-
-	buff = kmalloc(65536, GFP_KERNEL);
-	if (buff == NULL)
-		return -ENOMEM;
-
-	read = kmalloc(4, GFP_KERNEL);
-	if (!read) {
-		kfree(buff);
-		return -ENOMEM;
-	}
-
-	if ((ret = m920x_read(udev, M9206_FILTER, 0x0, 0x8000, read, 4)) != 0)
-		goto done;
-	deb("%x %x %x %x\n", read[0], read[1], read[2], read[3]);
-
-	if ((ret = m920x_read(udev, M9206_FW, 0x0, 0x0, read, 1)) != 0)
-		goto done;
-	deb("%x\n", read[0]);
-
-	for (pass = 0; pass < 2; pass++) {
-		for (i = 0; i + (sizeof(u16) * 3) < fw->size;) {
-			value = get_unaligned_le16(fw->data + i);
-			i += sizeof(u16);
-
-			index = get_unaligned_le16(fw->data + i);
-			i += sizeof(u16);
-
-			size = get_unaligned_le16(fw->data + i);
-			i += sizeof(u16);
-
-			if (pass == 1) {
-				/* Will stall if using fw->data ... */
-				memcpy(buff, fw->data + i, size);
-
-				ret = usb_control_msg(udev, usb_sndctrlpipe(udev,0),
-						      M9206_FW,
-						      USB_TYPE_VENDOR | USB_DIR_OUT,
-						      value, index, buff, size, 20);
-				if (ret != size) {
-					deb("error while uploading fw!\n");
-					ret = -EIO;
-					goto done;
-				}
-				msleep(3);
-			}
-			i += size;
-		}
-		if (i != fw->size) {
-			deb("bad firmware file!\n");
-			ret = -EINVAL;
-			goto done;
-		}
-	}
-
-	msleep(36);
-
-	/* m920x will disconnect itself from the bus after this. */
-	(void) m920x_write(udev, M9206_CORE, 0x01, M9206_FW_GO);
-	deb("firmware uploaded!\n");
-
- done:
-	kfree(read);
-	kfree(buff);
-
-	return ret;
-}
-
-/* Callbacks for DVB USB */
-static int m920x_identify_state(struct usb_device *udev,
-				struct dvb_usb_device_properties *props,
-				struct dvb_usb_device_description **desc,
-				int *cold)
-{
-	struct usb_host_interface *alt;
-
-	alt = usb_altnum_to_altsetting(usb_ifnum_to_if(udev, 0), 1);
-	*cold = (alt == NULL) ? 1 : 0;
-
-	return 0;
-}
-
-/* demod configurations */
-static int m920x_mt352_demod_init(struct dvb_frontend *fe)
-{
-	int ret;
-	u8 config[] = { CONFIG, 0x3d };
-	u8 clock[] = { CLOCK_CTL, 0x30 };
-	u8 reset[] = { RESET, 0x80 };
-	u8 adc_ctl[] = { ADC_CTL_1, 0x40 };
-	u8 agc[] = { AGC_TARGET, 0x1c, 0x20 };
-	u8 sec_agc[] = { 0x69, 0x00, 0xff, 0xff, 0x40, 0xff, 0x00, 0x40, 0x40 };
-	u8 unk1[] = { 0x93, 0x1a };
-	u8 unk2[] = { 0xb5, 0x7a };
-
-	deb("Demod init!\n");
-
-	if ((ret = mt352_write(fe, config, ARRAY_SIZE(config))) != 0)
-		return ret;
-	if ((ret = mt352_write(fe, clock, ARRAY_SIZE(clock))) != 0)
-		return ret;
-	if ((ret = mt352_write(fe, reset, ARRAY_SIZE(reset))) != 0)
-		return ret;
-	if ((ret = mt352_write(fe, adc_ctl, ARRAY_SIZE(adc_ctl))) != 0)
-		return ret;
-	if ((ret = mt352_write(fe, agc, ARRAY_SIZE(agc))) != 0)
-		return ret;
-	if ((ret = mt352_write(fe, sec_agc, ARRAY_SIZE(sec_agc))) != 0)
-		return ret;
-	if ((ret = mt352_write(fe, unk1, ARRAY_SIZE(unk1))) != 0)
-		return ret;
-	if ((ret = mt352_write(fe, unk2, ARRAY_SIZE(unk2))) != 0)
-		return ret;
-
-	return 0;
-}
-
-static struct mt352_config m920x_mt352_config = {
-	.demod_address = 0x0f,
-	.no_tuner = 1,
-	.demod_init = m920x_mt352_demod_init,
-};
-
-static struct tda1004x_config m920x_tda10046_08_config = {
-	.demod_address = 0x08,
-	.invert = 0,
-	.invert_oclk = 0,
-	.ts_mode = TDA10046_TS_SERIAL,
-	.xtal_freq = TDA10046_XTAL_16M,
-	.if_freq = TDA10046_FREQ_045,
-	.agc_config = TDA10046_AGC_TDA827X,
-	.gpio_config = TDA10046_GPTRI,
-	.request_firmware = NULL,
-};
-
-static struct tda1004x_config m920x_tda10046_0b_config = {
-	.demod_address = 0x0b,
-	.invert = 0,
-	.invert_oclk = 0,
-	.ts_mode = TDA10046_TS_SERIAL,
-	.xtal_freq = TDA10046_XTAL_16M,
-	.if_freq = TDA10046_FREQ_045,
-	.agc_config = TDA10046_AGC_TDA827X,
-	.gpio_config = TDA10046_GPTRI,
-	.request_firmware = NULL, /* uses firmware EEPROM */
-};
-
-/* tuner configurations */
-static struct qt1010_config m920x_qt1010_config = {
-	.i2c_address = 0x62
-};
-
-/* Callbacks for DVB USB */
-static int m920x_mt352_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	deb("%s\n",__func__);
-
-	adap->fe_adap[0].fe = dvb_attach(mt352_attach,
-					 &m920x_mt352_config,
-					 &adap->dev->i2c_adap);
-	if ((adap->fe_adap[0].fe) == NULL)
-		return -EIO;
-
-	return 0;
-}
-
-static int m920x_tda10046_08_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	deb("%s\n",__func__);
-
-	adap->fe_adap[0].fe = dvb_attach(tda10046_attach,
-					 &m920x_tda10046_08_config,
-					 &adap->dev->i2c_adap);
-	if ((adap->fe_adap[0].fe) == NULL)
-		return -EIO;
-
-	return 0;
-}
-
-static int m920x_tda10046_0b_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	deb("%s\n",__func__);
-
-	adap->fe_adap[0].fe = dvb_attach(tda10046_attach,
-					 &m920x_tda10046_0b_config,
-					 &adap->dev->i2c_adap);
-	if ((adap->fe_adap[0].fe) == NULL)
-		return -EIO;
-
-	return 0;
-}
-
-static int m920x_qt1010_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	deb("%s\n",__func__);
-
-	if (dvb_attach(qt1010_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap, &m920x_qt1010_config) == NULL)
-		return -ENODEV;
-
-	return 0;
-}
-
-static int m920x_tda8275_60_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	deb("%s\n",__func__);
-
-	if (dvb_attach(tda827x_attach, adap->fe_adap[0].fe, 0x60, &adap->dev->i2c_adap, NULL) == NULL)
-		return -ENODEV;
-
-	return 0;
-}
-
-static int m920x_tda8275_61_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	deb("%s\n",__func__);
-
-	if (dvb_attach(tda827x_attach, adap->fe_adap[0].fe, 0x61, &adap->dev->i2c_adap, NULL) == NULL)
-		return -ENODEV;
-
-	return 0;
-}
-
-static int m920x_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	dvb_attach(simple_tuner_attach, adap->fe_adap[0].fe,
-		   &adap->dev->i2c_adap, 0x61,
-		   TUNER_PHILIPS_FMD1216ME_MK3);
-	return 0;
-}
-
-/* device-specific initialization */
-static struct m920x_inits megasky_rc_init [] = {
-	{ M9206_RC_INIT2, 0xa8 },
-	{ M9206_RC_INIT1, 0x51 },
-	{ } /* terminating entry */
-};
-
-static struct m920x_inits tvwalkertwin_rc_init [] = {
-	{ M9206_RC_INIT2, 0x00 },
-	{ M9206_RC_INIT1, 0xef },
-	{ 0xff28,         0x00 },
-	{ 0xff23,         0x00 },
-	{ 0xff21,         0x30 },
-	{ } /* terminating entry */
-};
-
-static struct m920x_inits pinnacle310e_init[] = {
-	/* without these the tuner don't work */
-	{ 0xff20,         0x9b },
-	{ 0xff22,         0x70 },
-
-	/* rc settings */
-	{ 0xff50,         0x80 },
-	{ M9206_RC_INIT1, 0x00 },
-	{ M9206_RC_INIT2, 0xff },
-	{ } /* terminating entry */
-};
-
-/* ir keymaps */
-static struct rc_map_table rc_map_megasky_table[] = {
-	{ 0x0012, KEY_POWER },
-	{ 0x001e, KEY_CYCLEWINDOWS }, /* min/max */
-	{ 0x0002, KEY_CHANNELUP },
-	{ 0x0005, KEY_CHANNELDOWN },
-	{ 0x0003, KEY_VOLUMEUP },
-	{ 0x0006, KEY_VOLUMEDOWN },
-	{ 0x0004, KEY_MUTE },
-	{ 0x0007, KEY_OK }, /* TS */
-	{ 0x0008, KEY_STOP },
-	{ 0x0009, KEY_MENU }, /* swap */
-	{ 0x000a, KEY_REWIND },
-	{ 0x001b, KEY_PAUSE },
-	{ 0x001f, KEY_FASTFORWARD },
-	{ 0x000c, KEY_RECORD },
-	{ 0x000d, KEY_CAMERA }, /* screenshot */
-	{ 0x000e, KEY_COFFEE }, /* "MTS" */
-};
-
-static struct rc_map_table rc_map_tvwalkertwin_table[] = {
-	{ 0x0001, KEY_ZOOM }, /* Full Screen */
-	{ 0x0002, KEY_CAMERA }, /* snapshot */
-	{ 0x0003, KEY_MUTE },
-	{ 0x0004, KEY_REWIND },
-	{ 0x0005, KEY_PLAYPAUSE }, /* Play/Pause */
-	{ 0x0006, KEY_FASTFORWARD },
-	{ 0x0007, KEY_RECORD },
-	{ 0x0008, KEY_STOP },
-	{ 0x0009, KEY_TIME }, /* Timeshift */
-	{ 0x000c, KEY_COFFEE }, /* Recall */
-	{ 0x000e, KEY_CHANNELUP },
-	{ 0x0012, KEY_POWER },
-	{ 0x0015, KEY_MENU }, /* source */
-	{ 0x0018, KEY_CYCLEWINDOWS }, /* TWIN PIP */
-	{ 0x001a, KEY_CHANNELDOWN },
-	{ 0x001b, KEY_VOLUMEDOWN },
-	{ 0x001e, KEY_VOLUMEUP },
-};
-
-static struct rc_map_table rc_map_pinnacle310e_table[] = {
-	{ 0x16, KEY_POWER },
-	{ 0x17, KEY_FAVORITES },
-	{ 0x0f, KEY_TEXT },
-	{ 0x48, KEY_PROGRAM },		/* preview */
-	{ 0x1c, KEY_EPG },
-	{ 0x04, KEY_LIST },		/* record list */
-	{ 0x03, KEY_1 },
-	{ 0x01, KEY_2 },
-	{ 0x06, KEY_3 },
-	{ 0x09, KEY_4 },
-	{ 0x1d, KEY_5 },
-	{ 0x1f, KEY_6 },
-	{ 0x0d, KEY_7 },
-	{ 0x19, KEY_8 },
-	{ 0x1b, KEY_9 },
-	{ 0x15, KEY_0 },
-	{ 0x0c, KEY_CANCEL },
-	{ 0x4a, KEY_CLEAR },
-	{ 0x13, KEY_BACK },
-	{ 0x00, KEY_TAB },
-	{ 0x4b, KEY_UP },
-	{ 0x4e, KEY_LEFT },
-	{ 0x52, KEY_RIGHT },
-	{ 0x51, KEY_DOWN },
-	{ 0x4f, KEY_ENTER },		/* could also be KEY_OK */
-	{ 0x1e, KEY_VOLUMEUP },
-	{ 0x0a, KEY_VOLUMEDOWN },
-	{ 0x05, KEY_CHANNELUP },
-	{ 0x02, KEY_CHANNELDOWN },
-	{ 0x11, KEY_RECORD },
-	{ 0x14, KEY_PLAY },
-	{ 0x4c, KEY_PAUSE },
-	{ 0x1a, KEY_STOP },
-	{ 0x40, KEY_REWIND },
-	{ 0x12, KEY_FASTFORWARD },
-	{ 0x41, KEY_PREVIOUSSONG },	/* Replay */
-	{ 0x42, KEY_NEXTSONG },		/* Skip */
-	{ 0x54, KEY_CAMERA },		/* Capture */
-/*	{ 0x50, KEY_SAP },	*/		/* Sap */
-	{ 0x47, KEY_CYCLEWINDOWS },	/* Pip */
-	{ 0x4d, KEY_SCREEN },		/* FullScreen */
-	{ 0x08, KEY_SUBTITLE },
-	{ 0x0e, KEY_MUTE },
-/*	{ 0x49, KEY_LR },	*/		/* L/R */
-	{ 0x07, KEY_SLEEP },		/* Hibernate */
-	{ 0x08, KEY_VIDEO },		/* A/V */
-	{ 0x0e, KEY_MENU },		/* Recall */
-	{ 0x45, KEY_ZOOMIN },
-	{ 0x46, KEY_ZOOMOUT },
-	{ 0x18, KEY_RED },		/* Red */
-	{ 0x53, KEY_GREEN },		/* Green */
-	{ 0x5e, KEY_YELLOW },		/* Yellow */
-	{ 0x5f, KEY_BLUE },		/* Blue */
-};
-
-/* DVB USB Driver stuff */
-static struct dvb_usb_device_properties megasky_properties;
-static struct dvb_usb_device_properties digivox_mini_ii_properties;
-static struct dvb_usb_device_properties tvwalkertwin_properties;
-static struct dvb_usb_device_properties dposh_properties;
-static struct dvb_usb_device_properties pinnacle_pctv310e_properties;
-
-static int m920x_probe(struct usb_interface *intf,
-		       const struct usb_device_id *id)
-{
-	struct dvb_usb_device *d = NULL;
-	int ret;
-	struct m920x_inits *rc_init_seq = NULL;
-	int bInterfaceNumber = intf->cur_altsetting->desc.bInterfaceNumber;
-
-	deb("Probing for m920x device at interface %d\n", bInterfaceNumber);
-
-	if (bInterfaceNumber == 0) {
-		/* Single-tuner device, or first interface on
-		 * multi-tuner device
-		 */
-
-		ret = dvb_usb_device_init(intf, &megasky_properties,
-					  THIS_MODULE, &d, adapter_nr);
-		if (ret == 0) {
-			rc_init_seq = megasky_rc_init;
-			goto found;
-		}
-
-		ret = dvb_usb_device_init(intf, &digivox_mini_ii_properties,
-					  THIS_MODULE, &d, adapter_nr);
-		if (ret == 0) {
-			/* No remote control, so no rc_init_seq */
-			goto found;
-		}
-
-		/* This configures both tuners on the TV Walker Twin */
-		ret = dvb_usb_device_init(intf, &tvwalkertwin_properties,
-					  THIS_MODULE, &d, adapter_nr);
-		if (ret == 0) {
-			rc_init_seq = tvwalkertwin_rc_init;
-			goto found;
-		}
-
-		ret = dvb_usb_device_init(intf, &dposh_properties,
-					  THIS_MODULE, &d, adapter_nr);
-		if (ret == 0) {
-			/* Remote controller not supported yet. */
-			goto found;
-		}
-
-		ret = dvb_usb_device_init(intf, &pinnacle_pctv310e_properties,
-					  THIS_MODULE, &d, adapter_nr);
-		if (ret == 0) {
-			rc_init_seq = pinnacle310e_init;
-			goto found;
-		}
-
-		return ret;
-	} else {
-		/* Another interface on a multi-tuner device */
-
-		/* The LifeView TV Walker Twin gets here, but struct
-		 * tvwalkertwin_properties already configured both
-		 * tuners, so there is nothing for us to do here
-		 */
-	}
-
- found:
-	if ((ret = m920x_init_ep(intf)) < 0)
-		return ret;
-
-	if (d && (ret = m920x_init(d, rc_init_seq)) != 0)
-		return ret;
-
-	return ret;
-}
-
-static struct usb_device_id m920x_table [] = {
-		{ USB_DEVICE(USB_VID_MSI, USB_PID_MSI_MEGASKY580) },
-		{ USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC,
-			     USB_PID_MSI_DIGI_VOX_MINI_II) },
-		{ USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC,
-			     USB_PID_LIFEVIEW_TV_WALKER_TWIN_COLD) },
-		{ USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC,
-			     USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM) },
-		{ USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_COLD) },
-		{ USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_WARM) },
-		{ USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_PINNACLE_PCTV310E) },
-		{ }		/* Terminating entry */
-};
-MODULE_DEVICE_TABLE (usb, m920x_table);
-
-static struct dvb_usb_device_properties megasky_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = DEVICE_SPECIFIC,
-	.firmware = "dvb-usb-megasky-02.fw",
-	.download_firmware = m920x_firmware_download,
-
-	.rc.legacy = {
-		.rc_interval      = 100,
-		.rc_map_table     = rc_map_megasky_table,
-		.rc_map_size      = ARRAY_SIZE(rc_map_megasky_table),
-		.rc_query         = m920x_rc_query,
-	},
-
-	.size_of_priv     = sizeof(struct m920x_state),
-
-	.identify_state   = m920x_identify_state,
-	.num_adapters = 1,
-	.adapter = {{
-		.num_frontends = 1,
-		.fe = {{
-
-		.caps = DVB_USB_ADAP_HAS_PID_FILTER |
-			DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-
-		.pid_filter_count = 8,
-		.pid_filter       = m920x_pid_filter,
-		.pid_filter_ctrl  = m920x_pid_filter_ctrl,
-
-		.frontend_attach  = m920x_mt352_frontend_attach,
-		.tuner_attach     = m920x_qt1010_tuner_attach,
-
-		.stream = {
-			.type = USB_BULK,
-			.count = 8,
-			.endpoint = 0x81,
-			.u = {
-				.bulk = {
-					.buffersize = 512,
-				}
-			}
-		},
-		}},
-	}},
-	.i2c_algo         = &m920x_i2c_algo,
-
-	.num_device_descs = 1,
-	.devices = {
-		{   "MSI Mega Sky 580 DVB-T USB2.0",
-			{ &m920x_table[0], NULL },
-			{ NULL },
-		}
-	}
-};
-
-static struct dvb_usb_device_properties digivox_mini_ii_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = DEVICE_SPECIFIC,
-	.firmware = "dvb-usb-digivox-02.fw",
-	.download_firmware = m920x_firmware_download,
-
-	.size_of_priv     = sizeof(struct m920x_state),
-
-	.identify_state   = m920x_identify_state,
-	.num_adapters = 1,
-	.adapter = {{
-		.num_frontends = 1,
-		.fe = {{
-
-		.caps = DVB_USB_ADAP_HAS_PID_FILTER |
-			DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-
-		.pid_filter_count = 8,
-		.pid_filter       = m920x_pid_filter,
-		.pid_filter_ctrl  = m920x_pid_filter_ctrl,
-
-		.frontend_attach  = m920x_tda10046_08_frontend_attach,
-		.tuner_attach     = m920x_tda8275_60_tuner_attach,
-
-		.stream = {
-			.type = USB_BULK,
-			.count = 8,
-			.endpoint = 0x81,
-			.u = {
-				.bulk = {
-					.buffersize = 0x4000,
-				}
-			}
-		},
-		}},
-	}},
-	.i2c_algo         = &m920x_i2c_algo,
-
-	.num_device_descs = 1,
-	.devices = {
-		{   "MSI DIGI VOX mini II DVB-T USB2.0",
-			{ &m920x_table[1], NULL },
-			{ NULL },
-		},
-	}
-};
-
-/* LifeView TV Walker Twin support by Nick Andrew <nick@nick-andrew.net>
- *
- * LifeView TV Walker Twin has 1 x M9206, 2 x TDA10046, 2 x TDA8275A
- * TDA10046 #0 is located at i2c address 0x08
- * TDA10046 #1 is located at i2c address 0x0b
- * TDA8275A #0 is located at i2c address 0x60
- * TDA8275A #1 is located at i2c address 0x61
- */
-static struct dvb_usb_device_properties tvwalkertwin_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = DEVICE_SPECIFIC,
-	.firmware = "dvb-usb-tvwalkert.fw",
-	.download_firmware = m920x_firmware_download,
-
-	.rc.legacy = {
-		.rc_interval      = 100,
-		.rc_map_table     = rc_map_tvwalkertwin_table,
-		.rc_map_size      = ARRAY_SIZE(rc_map_tvwalkertwin_table),
-		.rc_query         = m920x_rc_query,
-	},
-
-	.size_of_priv     = sizeof(struct m920x_state),
-
-	.identify_state   = m920x_identify_state,
-	.num_adapters = 2,
-	.adapter = {{
-		.num_frontends = 1,
-		.fe = {{
-
-		.caps = DVB_USB_ADAP_HAS_PID_FILTER |
-			DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-
-		.pid_filter_count = 8,
-		.pid_filter       = m920x_pid_filter,
-		.pid_filter_ctrl  = m920x_pid_filter_ctrl,
-
-		.frontend_attach  = m920x_tda10046_08_frontend_attach,
-		.tuner_attach     = m920x_tda8275_60_tuner_attach,
-
-		.stream = {
-			.type = USB_BULK,
-			.count = 8,
-			.endpoint = 0x81,
-			.u = {
-				 .bulk = {
-					 .buffersize = 512,
-				 }
-			}
-		}},
-		}},{
-		.num_frontends = 1,
-		.fe = {{
-
-		.caps = DVB_USB_ADAP_HAS_PID_FILTER |
-			DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-
-		.pid_filter_count = 8,
-		.pid_filter       = m920x_pid_filter,
-		.pid_filter_ctrl  = m920x_pid_filter_ctrl,
-
-		.frontend_attach  = m920x_tda10046_0b_frontend_attach,
-		.tuner_attach     = m920x_tda8275_61_tuner_attach,
-
-		.stream = {
-			.type = USB_BULK,
-			.count = 8,
-			.endpoint = 0x82,
-			.u = {
-				 .bulk = {
-					 .buffersize = 512,
-				 }
-			}
-		}},
-		},
-	}},
-	.i2c_algo         = &m920x_i2c_algo,
-
-	.num_device_descs = 1,
-	.devices = {
-		{   .name = "LifeView TV Walker Twin DVB-T USB2.0",
-		    .cold_ids = { &m920x_table[2], NULL },
-		    .warm_ids = { &m920x_table[3], NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties dposh_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = DEVICE_SPECIFIC,
-	.firmware = "dvb-usb-dposh-01.fw",
-	.download_firmware = m920x_firmware_download,
-
-	.size_of_priv     = sizeof(struct m920x_state),
-
-	.identify_state   = m920x_identify_state,
-	.num_adapters = 1,
-	.adapter = {{
-		.num_frontends = 1,
-		.fe = {{
-		/* Hardware pid filters don't work with this device/firmware */
-
-		.frontend_attach  = m920x_mt352_frontend_attach,
-		.tuner_attach     = m920x_qt1010_tuner_attach,
-
-		.stream = {
-			.type = USB_BULK,
-			.count = 8,
-			.endpoint = 0x81,
-			.u = {
-				 .bulk = {
-					 .buffersize = 512,
-				 }
-			}
-		},
-		}},
-	}},
-	.i2c_algo         = &m920x_i2c_algo,
-
-	.num_device_descs = 1,
-	.devices = {
-		 {   .name = "Dposh DVB-T USB2.0",
-		     .cold_ids = { &m920x_table[4], NULL },
-		     .warm_ids = { &m920x_table[5], NULL },
-		 },
-	 }
-};
-
-static struct dvb_usb_device_properties pinnacle_pctv310e_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = DEVICE_SPECIFIC,
-	.download_firmware = NULL,
-
-	.rc.legacy = {
-		.rc_interval      = 100,
-		.rc_map_table     = rc_map_pinnacle310e_table,
-		.rc_map_size      = ARRAY_SIZE(rc_map_pinnacle310e_table),
-		.rc_query         = m920x_rc_query,
-	},
-
-	.size_of_priv     = sizeof(struct m920x_state),
-
-	.identify_state   = m920x_identify_state,
-	.num_adapters = 1,
-	.adapter = {{
-		.num_frontends = 1,
-		.fe = {{
-
-		.caps = DVB_USB_ADAP_HAS_PID_FILTER |
-			DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-
-		.pid_filter_count = 8,
-		.pid_filter       = m920x_pid_filter,
-		.pid_filter_ctrl  = m920x_pid_filter_ctrl,
-
-		.frontend_attach  = m920x_mt352_frontend_attach,
-		.tuner_attach     = m920x_fmd1216me_tuner_attach,
-
-		.stream = {
-			.type = USB_ISOC,
-			.count = 5,
-			.endpoint = 0x84,
-			.u = {
-				.isoc = {
-					.framesperurb = 128,
-					.framesize = 564,
-					.interval = 1,
-				}
-			}
-		},
-		}},
-	} },
-	.i2c_algo         = &m920x_i2c_algo,
-
-	.num_device_descs = 1,
-	.devices = {
-		{   "Pinnacle PCTV 310e",
-			{ &m920x_table[6], NULL },
-			{ NULL },
-		}
-	}
-};
-
-static struct usb_driver m920x_driver = {
-	.name		= "dvb_usb_m920x",
-	.probe		= m920x_probe,
-	.disconnect	= dvb_usb_device_exit,
-	.id_table	= m920x_table,
-};
-
-module_usb_driver(m920x_driver);
-
-MODULE_AUTHOR("Aapo Tahkola <aet@rasterburn.org>");
-MODULE_DESCRIPTION("DVB Driver for ULI M920x");
-MODULE_VERSION("0.1");
-MODULE_LICENSE("GPL");
-
-/*
- * Local variables:
- * c-basic-offset: 8
- */
diff --git a/drivers/media/dvb/dvb-usb/m920x.h b/drivers/media/dvb/dvb-usb/m920x.h
deleted file mode 100644
index 3c06151..0000000
--- a/drivers/media/dvb/dvb-usb/m920x.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef _DVB_USB_M920X_H_
-#define _DVB_USB_M920X_H_
-
-#define DVB_USB_LOG_PREFIX "m920x"
-#include "dvb-usb.h"
-
-#define deb(args...)   dprintk(dvb_usb_m920x_debug,0x01,args)
-
-#define M9206_CORE	0x22
-#define M9206_RC_STATE	0xff51
-#define M9206_RC_KEY	0xff52
-#define M9206_RC_INIT1	0xff54
-#define M9206_RC_INIT2	0xff55
-#define M9206_FW_GO	0xff69
-
-#define M9206_I2C	0x23
-#define M9206_FILTER	0x25
-#define M9206_FW	0x30
-
-#define M9206_MAX_FILTERS 8
-#define M9206_MAX_ADAPTERS 4
-
-/*
-sequences found in logs:
-[index value]
-0x80 write addr
-(0x00 out byte)*
-0x40 out byte
-
-0x80 write addr
-(0x00 out byte)*
-0x80 read addr
-(0x21 in byte)*
-0x60 in byte
-
-this sequence works:
-0x80 read addr
-(0x21 in byte)*
-0x60 in byte
-
-Guess at API of the I2C function:
-I2C operation is done one byte at a time with USB control messages.  The
-index the messages is sent to is made up of a set of flags that control
-the I2C bus state:
-0x80:  Send START condition.  After a START condition, one would normally
-       always send the 7-bit slave I2C address as the 7 MSB, followed by
-       the read/write bit as the LSB.
-0x40:  Send STOP condition.  This should be set on the last byte of an
-       I2C transaction.
-0x20:  Read a byte from the slave.  As opposed to writing a byte to the
-       slave.  The slave will normally not produce any data unless you
-       set the R/W bit to 1 when sending the slave's address after the
-       START condition.
-0x01:  Respond with ACK, as opposed to a NACK.  For a multi-byte read,
-       the master should send an ACK, that is pull SDA low during the 9th
-       clock cycle, after every byte but the last.  This flags only makes
-       sense when bit 0x20 is set, indicating a read.
-
-What any other bits might mean, or how to get the slave's ACK/NACK
-response to a write, is unknown.
-*/
-
-struct m920x_state {
-	u16 filters[M9206_MAX_ADAPTERS][M9206_MAX_FILTERS];
-	int filtering_enabled[M9206_MAX_ADAPTERS];
-	int rep_count;
-};
-
-/* Initialisation data for the m920x
- */
-
-struct m920x_inits {
-	u16 address;
-	u8  data;
-};
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-demod.c b/drivers/media/dvb/dvb-usb/mxl111sf-demod.c
deleted file mode 100644
index d83df4b..0000000
--- a/drivers/media/dvb/dvb-usb/mxl111sf-demod.c
+++ /dev/null
@@ -1,612 +0,0 @@
-/*
- *  mxl111sf-demod.c - driver for the MaxLinear MXL111SF DVB-T demodulator
- *
- *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "mxl111sf-demod.h"
-#include "mxl111sf-reg.h"
-
-/* debug */
-static int mxl111sf_demod_debug;
-module_param_named(debug, mxl111sf_demod_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able)).");
-
-#define mxl_dbg(fmt, arg...) \
-	if (mxl111sf_demod_debug) \
-		mxl_printk(KERN_DEBUG, fmt, ##arg)
-
-/* ------------------------------------------------------------------------ */
-
-struct mxl111sf_demod_state {
-	struct mxl111sf_state *mxl_state;
-
-	struct mxl111sf_demod_config *cfg;
-
-	struct dvb_frontend fe;
-};
-
-/* ------------------------------------------------------------------------ */
-
-static int mxl111sf_demod_read_reg(struct mxl111sf_demod_state *state,
-				   u8 addr, u8 *data)
-{
-	return (state->cfg->read_reg) ?
-		state->cfg->read_reg(state->mxl_state, addr, data) :
-		-EINVAL;
-}
-
-static int mxl111sf_demod_write_reg(struct mxl111sf_demod_state *state,
-				    u8 addr, u8 data)
-{
-	return (state->cfg->write_reg) ?
-		state->cfg->write_reg(state->mxl_state, addr, data) :
-		-EINVAL;
-}
-
-static
-int mxl111sf_demod_program_regs(struct mxl111sf_demod_state *state,
-				struct mxl111sf_reg_ctrl_info *ctrl_reg_info)
-{
-	return (state->cfg->program_regs) ?
-		state->cfg->program_regs(state->mxl_state, ctrl_reg_info) :
-		-EINVAL;
-}
-
-/* ------------------------------------------------------------------------ */
-/* TPS */
-
-static
-int mxl1x1sf_demod_get_tps_code_rate(struct mxl111sf_demod_state *state,
-				     fe_code_rate_t *code_rate)
-{
-	u8 val;
-	int ret = mxl111sf_demod_read_reg(state, V6_CODE_RATE_TPS_REG, &val);
-	/* bit<2:0> - 000:1/2, 001:2/3, 010:3/4, 011:5/6, 100:7/8 */
-	if (mxl_fail(ret))
-		goto fail;
-
-	switch (val & V6_CODE_RATE_TPS_MASK) {
-	case 0:
-		*code_rate = FEC_1_2;
-		break;
-	case 1:
-		*code_rate = FEC_2_3;
-		break;
-	case 2:
-		*code_rate = FEC_3_4;
-		break;
-	case 3:
-		*code_rate = FEC_5_6;
-		break;
-	case 4:
-		*code_rate = FEC_7_8;
-		break;
-	}
-fail:
-	return ret;
-}
-
-static
-int mxl1x1sf_demod_get_tps_modulation(struct mxl111sf_demod_state *state,
-					 fe_modulation_t *modulation)
-{
-	u8 val;
-	int ret = mxl111sf_demod_read_reg(state, V6_MODORDER_TPS_REG, &val);
-	/* Constellation, 00 : QPSK, 01 : 16QAM, 10:64QAM */
-	if (mxl_fail(ret))
-		goto fail;
-
-	switch ((val & V6_PARAM_CONSTELLATION_MASK) >> 4) {
-	case 0:
-		*modulation = QPSK;
-		break;
-	case 1:
-		*modulation = QAM_16;
-		break;
-	case 2:
-		*modulation = QAM_64;
-		break;
-	}
-fail:
-	return ret;
-}
-
-static
-int mxl1x1sf_demod_get_tps_guard_fft_mode(struct mxl111sf_demod_state *state,
-					  fe_transmit_mode_t *fft_mode)
-{
-	u8 val;
-	int ret = mxl111sf_demod_read_reg(state, V6_MODE_TPS_REG, &val);
-	/* FFT Mode, 00:2K, 01:8K, 10:4K */
-	if (mxl_fail(ret))
-		goto fail;
-
-	switch ((val & V6_PARAM_FFT_MODE_MASK) >> 2) {
-	case 0:
-		*fft_mode = TRANSMISSION_MODE_2K;
-		break;
-	case 1:
-		*fft_mode = TRANSMISSION_MODE_8K;
-		break;
-	case 2:
-		*fft_mode = TRANSMISSION_MODE_4K;
-		break;
-	}
-fail:
-	return ret;
-}
-
-static
-int mxl1x1sf_demod_get_tps_guard_interval(struct mxl111sf_demod_state *state,
-					  fe_guard_interval_t *guard)
-{
-	u8 val;
-	int ret = mxl111sf_demod_read_reg(state, V6_CP_TPS_REG, &val);
-	/* 00:1/32, 01:1/16, 10:1/8, 11:1/4 */
-	if (mxl_fail(ret))
-		goto fail;
-
-	switch ((val & V6_PARAM_GI_MASK) >> 4) {
-	case 0:
-		*guard = GUARD_INTERVAL_1_32;
-		break;
-	case 1:
-		*guard = GUARD_INTERVAL_1_16;
-		break;
-	case 2:
-		*guard = GUARD_INTERVAL_1_8;
-		break;
-	case 3:
-		*guard = GUARD_INTERVAL_1_4;
-		break;
-	}
-fail:
-	return ret;
-}
-
-static
-int mxl1x1sf_demod_get_tps_hierarchy(struct mxl111sf_demod_state *state,
-				     fe_hierarchy_t *hierarchy)
-{
-	u8 val;
-	int ret = mxl111sf_demod_read_reg(state, V6_TPS_HIERACHY_REG, &val);
-	/* bit<6:4> - 000:Non hierarchy, 001:1, 010:2, 011:4 */
-	if (mxl_fail(ret))
-		goto fail;
-
-	switch ((val & V6_TPS_HIERARCHY_INFO_MASK) >> 6) {
-	case 0:
-		*hierarchy = HIERARCHY_NONE;
-		break;
-	case 1:
-		*hierarchy = HIERARCHY_1;
-		break;
-	case 2:
-		*hierarchy = HIERARCHY_2;
-		break;
-	case 3:
-		*hierarchy = HIERARCHY_4;
-		break;
-	}
-fail:
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-/* LOCKS */
-
-static
-int mxl1x1sf_demod_get_sync_lock_status(struct mxl111sf_demod_state *state,
-					int *sync_lock)
-{
-	u8 val = 0;
-	int ret = mxl111sf_demod_read_reg(state, V6_SYNC_LOCK_REG, &val);
-	if (mxl_fail(ret))
-		goto fail;
-	*sync_lock = (val & SYNC_LOCK_MASK) >> 4;
-fail:
-	return ret;
-}
-
-static
-int mxl1x1sf_demod_get_rs_lock_status(struct mxl111sf_demod_state *state,
-				      int *rs_lock)
-{
-	u8 val = 0;
-	int ret = mxl111sf_demod_read_reg(state, V6_RS_LOCK_DET_REG, &val);
-	if (mxl_fail(ret))
-		goto fail;
-	*rs_lock = (val & RS_LOCK_DET_MASK) >> 3;
-fail:
-	return ret;
-}
-
-static
-int mxl1x1sf_demod_get_tps_lock_status(struct mxl111sf_demod_state *state,
-				       int *tps_lock)
-{
-	u8 val = 0;
-	int ret = mxl111sf_demod_read_reg(state, V6_TPS_LOCK_REG, &val);
-	if (mxl_fail(ret))
-		goto fail;
-	*tps_lock = (val & V6_PARAM_TPS_LOCK_MASK) >> 6;
-fail:
-	return ret;
-}
-
-static
-int mxl1x1sf_demod_get_fec_lock_status(struct mxl111sf_demod_state *state,
-				       int *fec_lock)
-{
-	u8 val = 0;
-	int ret = mxl111sf_demod_read_reg(state, V6_IRQ_STATUS_REG, &val);
-	if (mxl_fail(ret))
-		goto fail;
-	*fec_lock = (val & IRQ_MASK_FEC_LOCK) >> 4;
-fail:
-	return ret;
-}
-
-#if 0
-static
-int mxl1x1sf_demod_get_cp_lock_status(struct mxl111sf_demod_state *state,
-				      int *cp_lock)
-{
-	u8 val = 0;
-	int ret = mxl111sf_demod_read_reg(state, V6_CP_LOCK_DET_REG, &val);
-	if (mxl_fail(ret))
-		goto fail;
-	*cp_lock = (val & V6_CP_LOCK_DET_MASK) >> 2;
-fail:
-	return ret;
-}
-#endif
-
-static int mxl1x1sf_demod_reset_irq_status(struct mxl111sf_demod_state *state)
-{
-	return mxl111sf_demod_write_reg(state, 0x0e, 0xff);
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int mxl111sf_demod_set_frontend(struct dvb_frontend *fe)
-{
-	struct mxl111sf_demod_state *state = fe->demodulator_priv;
-	int ret = 0;
-
-	struct mxl111sf_reg_ctrl_info phy_pll_patch[] = {
-		{0x00, 0xff, 0x01}, /* change page to 1 */
-		{0x40, 0xff, 0x05},
-		{0x40, 0xff, 0x01},
-		{0x41, 0xff, 0xca},
-		{0x41, 0xff, 0xc0},
-		{0x00, 0xff, 0x00}, /* change page to 0 */
-		{0,    0,    0}
-	};
-
-	mxl_dbg("()");
-
-	if (fe->ops.tuner_ops.set_params) {
-		ret = fe->ops.tuner_ops.set_params(fe);
-		if (mxl_fail(ret))
-			goto fail;
-		msleep(50);
-	}
-	ret = mxl111sf_demod_program_regs(state, phy_pll_patch);
-	mxl_fail(ret);
-	msleep(50);
-	ret = mxl1x1sf_demod_reset_irq_status(state);
-	mxl_fail(ret);
-	msleep(100);
-fail:
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-
-#if 0
-/* resets TS Packet error count */
-/* After setting 7th bit of V5_PER_COUNT_RESET_REG, it should be reset to 0. */
-static
-int mxl1x1sf_demod_reset_packet_error_count(struct mxl111sf_demod_state *state)
-{
-	struct mxl111sf_reg_ctrl_info reset_per_count[] = {
-		{0x20, 0x01, 0x01},
-		{0x20, 0x01, 0x00},
-		{0,    0,    0}
-	};
-	return mxl111sf_demod_program_regs(state, reset_per_count);
-}
-#endif
-
-/* returns TS Packet error count */
-/* PER Count = FEC_PER_COUNT * (2 ** (FEC_PER_SCALE * 4)) */
-static int mxl111sf_demod_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	struct mxl111sf_demod_state *state = fe->demodulator_priv;
-	u32 fec_per_count, fec_per_scale;
-	u8 val;
-	int ret;
-
-	*ucblocks = 0;
-
-	/* FEC_PER_COUNT Register */
-	ret = mxl111sf_demod_read_reg(state, V6_FEC_PER_COUNT_REG, &val);
-	if (mxl_fail(ret))
-		goto fail;
-
-	fec_per_count = val;
-
-	/* FEC_PER_SCALE Register */
-	ret = mxl111sf_demod_read_reg(state, V6_FEC_PER_SCALE_REG, &val);
-	if (mxl_fail(ret))
-		goto fail;
-
-	val &= V6_FEC_PER_SCALE_MASK;
-	val *= 4;
-
-	fec_per_scale = 1 << val;
-
-	fec_per_count *= fec_per_scale;
-
-	*ucblocks = fec_per_count;
-fail:
-	return ret;
-}
-
-#ifdef MXL111SF_DEMOD_ENABLE_CALCULATIONS
-/* FIXME: leaving this enabled breaks the build on some architectures,
- * and we shouldn't have any floating point math in the kernel, anyway.
- *
- * These macros need to be re-written, but it's harmless to simply
- * return zero for now. */
-#define CALCULATE_BER(avg_errors, count) \
-	((u32)(avg_errors * 4)/(count*64*188*8))
-#define CALCULATE_SNR(data) \
-	((u32)((10 * (u32)data / 64) - 2.5))
-#else
-#define CALCULATE_BER(avg_errors, count) 0
-#define CALCULATE_SNR(data) 0
-#endif
-
-static int mxl111sf_demod_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct mxl111sf_demod_state *state = fe->demodulator_priv;
-	u8 val1, val2, val3;
-	int ret;
-
-	*ber = 0;
-
-	ret = mxl111sf_demod_read_reg(state, V6_RS_AVG_ERRORS_LSB_REG, &val1);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_demod_read_reg(state, V6_RS_AVG_ERRORS_MSB_REG, &val2);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_demod_read_reg(state, V6_N_ACCUMULATE_REG, &val3);
-	if (mxl_fail(ret))
-		goto fail;
-
-	*ber = CALCULATE_BER((val1 | (val2 << 8)), val3);
-fail:
-	return ret;
-}
-
-static int mxl111sf_demod_calc_snr(struct mxl111sf_demod_state *state,
-				   u16 *snr)
-{
-	u8 val1, val2;
-	int ret;
-
-	*snr = 0;
-
-	ret = mxl111sf_demod_read_reg(state, V6_SNR_RB_LSB_REG, &val1);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_demod_read_reg(state, V6_SNR_RB_MSB_REG, &val2);
-	if (mxl_fail(ret))
-		goto fail;
-
-	*snr = CALCULATE_SNR(val1 | ((val2 & 0x03) << 8));
-fail:
-	return ret;
-}
-
-static int mxl111sf_demod_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct mxl111sf_demod_state *state = fe->demodulator_priv;
-
-	int ret = mxl111sf_demod_calc_snr(state, snr);
-	if (mxl_fail(ret))
-		goto fail;
-
-	*snr /= 10; /* 0.1 dB */
-fail:
-	return ret;
-}
-
-static int mxl111sf_demod_read_status(struct dvb_frontend *fe,
-				      fe_status_t *status)
-{
-	struct mxl111sf_demod_state *state = fe->demodulator_priv;
-	int ret, locked, cr_lock, sync_lock, fec_lock;
-
-	*status = 0;
-
-	ret = mxl1x1sf_demod_get_rs_lock_status(state, &locked);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl1x1sf_demod_get_tps_lock_status(state, &cr_lock);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl1x1sf_demod_get_sync_lock_status(state, &sync_lock);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl1x1sf_demod_get_fec_lock_status(state, &fec_lock);
-	if (mxl_fail(ret))
-		goto fail;
-
-	if (locked)
-		*status |= FE_HAS_SIGNAL;
-	if (cr_lock)
-		*status |= FE_HAS_CARRIER;
-	if (sync_lock)
-		*status |= FE_HAS_SYNC;
-	if (fec_lock) /* false positives? */
-		*status |= FE_HAS_VITERBI;
-
-	if ((locked) && (cr_lock) && (sync_lock))
-		*status |= FE_HAS_LOCK;
-fail:
-	return ret;
-}
-
-static int mxl111sf_demod_read_signal_strength(struct dvb_frontend *fe,
-					       u16 *signal_strength)
-{
-	struct mxl111sf_demod_state *state = fe->demodulator_priv;
-	fe_modulation_t modulation;
-	u16 snr;
-
-	mxl111sf_demod_calc_snr(state, &snr);
-	mxl1x1sf_demod_get_tps_modulation(state, &modulation);
-
-	switch (modulation) {
-	case QPSK:
-		*signal_strength = (snr >= 1300) ?
-			min(65535, snr * 44) : snr * 38;
-		break;
-	case QAM_16:
-		*signal_strength = (snr >= 1500) ?
-			min(65535, snr * 38) : snr * 33;
-		break;
-	case QAM_64:
-		*signal_strength = (snr >= 2000) ?
-			min(65535, snr * 29) : snr * 25;
-		break;
-	default:
-		*signal_strength = 0;
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int mxl111sf_demod_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct mxl111sf_demod_state *state = fe->demodulator_priv;
-
-	mxl_dbg("()");
-#if 0
-	p->inversion = /* FIXME */ ? INVERSION_ON : INVERSION_OFF;
-#endif
-	if (fe->ops.tuner_ops.get_bandwidth)
-		fe->ops.tuner_ops.get_bandwidth(fe, &p->bandwidth_hz);
-	if (fe->ops.tuner_ops.get_frequency)
-		fe->ops.tuner_ops.get_frequency(fe, &p->frequency);
-	mxl1x1sf_demod_get_tps_code_rate(state, &p->code_rate_HP);
-	mxl1x1sf_demod_get_tps_code_rate(state, &p->code_rate_LP);
-	mxl1x1sf_demod_get_tps_modulation(state, &p->modulation);
-	mxl1x1sf_demod_get_tps_guard_fft_mode(state,
-					      &p->transmission_mode);
-	mxl1x1sf_demod_get_tps_guard_interval(state,
-					      &p->guard_interval);
-	mxl1x1sf_demod_get_tps_hierarchy(state,
-					 &p->hierarchy);
-
-	return 0;
-}
-
-static
-int mxl111sf_demod_get_tune_settings(struct dvb_frontend *fe,
-				     struct dvb_frontend_tune_settings *tune)
-{
-	tune->min_delay_ms = 1000;
-	return 0;
-}
-
-static void mxl111sf_demod_release(struct dvb_frontend *fe)
-{
-	struct mxl111sf_demod_state *state = fe->demodulator_priv;
-	mxl_dbg("()");
-	kfree(state);
-	fe->demodulator_priv = NULL;
-}
-
-static struct dvb_frontend_ops mxl111sf_demod_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name               = "MaxLinear MxL111SF DVB-T demodulator",
-		.frequency_min      = 177000000,
-		.frequency_max      = 858000000,
-		.frequency_stepsize = 166666,
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
-			FE_CAN_QAM_AUTO |
-			FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER
-	},
-	.release              = mxl111sf_demod_release,
-#if 0
-	.init                 = mxl111sf_init,
-	.i2c_gate_ctrl        = mxl111sf_i2c_gate_ctrl,
-#endif
-	.set_frontend         = mxl111sf_demod_set_frontend,
-	.get_frontend         = mxl111sf_demod_get_frontend,
-	.get_tune_settings    = mxl111sf_demod_get_tune_settings,
-	.read_status          = mxl111sf_demod_read_status,
-	.read_signal_strength = mxl111sf_demod_read_signal_strength,
-	.read_ber             = mxl111sf_demod_read_ber,
-	.read_snr             = mxl111sf_demod_read_snr,
-	.read_ucblocks        = mxl111sf_demod_read_ucblocks,
-};
-
-struct dvb_frontend *mxl111sf_demod_attach(struct mxl111sf_state *mxl_state,
-					   struct mxl111sf_demod_config *cfg)
-{
-	struct mxl111sf_demod_state *state = NULL;
-
-	mxl_dbg("()");
-
-	state = kzalloc(sizeof(struct mxl111sf_demod_state), GFP_KERNEL);
-	if (state == NULL)
-		return NULL;
-
-	state->mxl_state = mxl_state;
-	state->cfg = cfg;
-
-	memcpy(&state->fe.ops, &mxl111sf_demod_ops,
-	       sizeof(struct dvb_frontend_ops));
-
-	state->fe.demodulator_priv = state;
-	return &state->fe;
-}
-EXPORT_SYMBOL_GPL(mxl111sf_demod_attach);
-
-MODULE_DESCRIPTION("MaxLinear MxL111SF DVB-T demodulator driver");
-MODULE_AUTHOR("Michael Krufky <mkrufky@kernellabs.com>");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("0.1");
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-demod.h b/drivers/media/dvb/dvb-usb/mxl111sf-demod.h
deleted file mode 100644
index 432706a..0000000
--- a/drivers/media/dvb/dvb-usb/mxl111sf-demod.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- *  mxl111sf-demod.h - driver for the MaxLinear MXL111SF DVB-T demodulator
- *
- *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MXL111SF_DEMOD_H__
-#define __MXL111SF_DEMOD_H__
-
-#include "dvb_frontend.h"
-#include "mxl111sf.h"
-
-struct mxl111sf_demod_config {
-	int (*read_reg)(struct mxl111sf_state *state, u8 addr, u8 *data);
-	int (*write_reg)(struct mxl111sf_state *state, u8 addr, u8 data);
-	int (*program_regs)(struct mxl111sf_state *state,
-			    struct mxl111sf_reg_ctrl_info *ctrl_reg_info);
-};
-
-#if defined(CONFIG_DVB_USB_MXL111SF) || \
-	(defined(CONFIG_DVB_USB_MXL111SF_MODULE) && defined(MODULE))
-extern
-struct dvb_frontend *mxl111sf_demod_attach(struct mxl111sf_state *mxl_state,
-					   struct mxl111sf_demod_config *cfg);
-#else
-static inline
-struct dvb_frontend *mxl111sf_demod_attach(struct mxl111sf_state *mxl_state,
-					   struct mxl111sf_demod_config *cfg)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_USB_MXL111SF */
-
-#endif /* __MXL111SF_DEMOD_H__ */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-gpio.c b/drivers/media/dvb/dvb-usb/mxl111sf-gpio.c
deleted file mode 100644
index e4121cb..0000000
--- a/drivers/media/dvb/dvb-usb/mxl111sf-gpio.c
+++ /dev/null
@@ -1,763 +0,0 @@
-/*
- *  mxl111sf-gpio.c - driver for the MaxLinear MXL111SF
- *
- *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "mxl111sf-gpio.h"
-#include "mxl111sf-i2c.h"
-#include "mxl111sf.h"
-
-/* ------------------------------------------------------------------------- */
-
-#define MXL_GPIO_MUX_REG_0 0x84
-#define MXL_GPIO_MUX_REG_1 0x89
-#define MXL_GPIO_MUX_REG_2 0x82
-
-#define MXL_GPIO_DIR_INPUT  0
-#define MXL_GPIO_DIR_OUTPUT 1
-
-
-static int mxl111sf_set_gpo_state(struct mxl111sf_state *state, u8 pin, u8 val)
-{
-	int ret;
-	u8 tmp;
-
-	mxl_debug_adv("(%d, %d)", pin, val);
-
-	if ((pin > 0) && (pin < 8)) {
-		ret = mxl111sf_read_reg(state, 0x19, &tmp);
-		if (mxl_fail(ret))
-			goto fail;
-		tmp &= ~(1 << (pin - 1));
-		tmp |= (val << (pin - 1));
-		ret = mxl111sf_write_reg(state, 0x19, tmp);
-		if (mxl_fail(ret))
-			goto fail;
-	} else if (pin <= 10) {
-		if (pin == 0)
-			pin += 7;
-		ret = mxl111sf_read_reg(state, 0x30, &tmp);
-		if (mxl_fail(ret))
-			goto fail;
-		tmp &= ~(1 << (pin - 3));
-		tmp |= (val << (pin - 3));
-		ret = mxl111sf_write_reg(state, 0x30, tmp);
-		if (mxl_fail(ret))
-			goto fail;
-	} else
-		ret = -EINVAL;
-fail:
-	return ret;
-}
-
-static int mxl111sf_get_gpi_state(struct mxl111sf_state *state, u8 pin, u8 *val)
-{
-	int ret;
-	u8 tmp;
-
-	mxl_debug("(0x%02x)", pin);
-
-	*val = 0;
-
-	switch (pin) {
-	case 0:
-	case 1:
-	case 2:
-	case 3:
-		ret = mxl111sf_read_reg(state, 0x23, &tmp);
-		if (mxl_fail(ret))
-			goto fail;
-		*val = (tmp >> (pin + 4)) & 0x01;
-		break;
-	case 4:
-	case 5:
-	case 6:
-	case 7:
-		ret = mxl111sf_read_reg(state, 0x2f, &tmp);
-		if (mxl_fail(ret))
-			goto fail;
-		*val = (tmp >> pin) & 0x01;
-		break;
-	case 8:
-	case 9:
-	case 10:
-		ret = mxl111sf_read_reg(state, 0x22, &tmp);
-		if (mxl_fail(ret))
-			goto fail;
-		*val = (tmp >> (pin - 3)) & 0x01;
-		break;
-	default:
-		return -EINVAL; /* invalid pin */
-	}
-fail:
-	return ret;
-}
-
-struct mxl_gpio_cfg {
-	u8 pin;
-	u8 dir;
-	u8 val;
-};
-
-static int mxl111sf_config_gpio_pins(struct mxl111sf_state *state,
-				     struct mxl_gpio_cfg *gpio_cfg)
-{
-	int ret;
-	u8 tmp;
-
-	mxl_debug_adv("(%d, %d)", gpio_cfg->pin, gpio_cfg->dir);
-
-	switch (gpio_cfg->pin) {
-	case 0:
-	case 1:
-	case 2:
-	case 3:
-		ret = mxl111sf_read_reg(state, MXL_GPIO_MUX_REG_0, &tmp);
-		if (mxl_fail(ret))
-			goto fail;
-		tmp &= ~(1 << (gpio_cfg->pin + 4));
-		tmp |= (gpio_cfg->dir << (gpio_cfg->pin + 4));
-		ret = mxl111sf_write_reg(state, MXL_GPIO_MUX_REG_0, tmp);
-		if (mxl_fail(ret))
-			goto fail;
-		break;
-	case 4:
-	case 5:
-	case 6:
-	case 7:
-		ret = mxl111sf_read_reg(state, MXL_GPIO_MUX_REG_1, &tmp);
-		if (mxl_fail(ret))
-			goto fail;
-		tmp &= ~(1 << gpio_cfg->pin);
-		tmp |= (gpio_cfg->dir << gpio_cfg->pin);
-		ret = mxl111sf_write_reg(state, MXL_GPIO_MUX_REG_1, tmp);
-		if (mxl_fail(ret))
-			goto fail;
-		break;
-	case 8:
-	case 9:
-	case 10:
-		ret = mxl111sf_read_reg(state, MXL_GPIO_MUX_REG_2, &tmp);
-		if (mxl_fail(ret))
-			goto fail;
-		tmp &= ~(1 << (gpio_cfg->pin - 3));
-		tmp |= (gpio_cfg->dir << (gpio_cfg->pin - 3));
-		ret = mxl111sf_write_reg(state, MXL_GPIO_MUX_REG_2, tmp);
-		if (mxl_fail(ret))
-			goto fail;
-		break;
-	default:
-		return -EINVAL; /* invalid pin */
-	}
-
-	ret = (MXL_GPIO_DIR_OUTPUT == gpio_cfg->dir) ?
-		mxl111sf_set_gpo_state(state,
-				       gpio_cfg->pin, gpio_cfg->val) :
-		mxl111sf_get_gpi_state(state,
-				       gpio_cfg->pin, &gpio_cfg->val);
-	mxl_fail(ret);
-fail:
-	return ret;
-}
-
-static int mxl111sf_hw_do_set_gpio(struct mxl111sf_state *state,
-				   int gpio, int direction, int val)
-{
-	struct mxl_gpio_cfg gpio_config = {
-		.pin = gpio,
-		.dir = direction,
-		.val = val,
-	};
-
-	mxl_debug("(%d, %d, %d)", gpio, direction, val);
-
-	return mxl111sf_config_gpio_pins(state, &gpio_config);
-}
-
-/* ------------------------------------------------------------------------- */
-
-#define PIN_MUX_MPEG_MODE_MASK          0x40   /* 0x17 <6> */
-#define PIN_MUX_MPEG_PAR_EN_MASK        0x01   /* 0x18 <0> */
-#define PIN_MUX_MPEG_SER_EN_MASK        0x02   /* 0x18 <1> */
-#define PIN_MUX_MPG_IN_MUX_MASK         0x80   /* 0x3D <7> */
-#define PIN_MUX_BT656_ENABLE_MASK       0x04   /* 0x12 <2> */
-#define PIN_MUX_I2S_ENABLE_MASK         0x40   /* 0x15 <6> */
-#define PIN_MUX_SPI_MODE_MASK           0x10   /* 0x3D <4> */
-#define PIN_MUX_MCLK_EN_CTRL_MASK       0x10   /* 0x82 <4> */
-#define PIN_MUX_MPSYN_EN_CTRL_MASK      0x20   /* 0x82 <5> */
-#define PIN_MUX_MDVAL_EN_CTRL_MASK      0x40   /* 0x82 <6> */
-#define PIN_MUX_MPERR_EN_CTRL_MASK      0x80   /* 0x82 <7> */
-#define PIN_MUX_MDAT_EN_0_MASK          0x10   /* 0x84 <4> */
-#define PIN_MUX_MDAT_EN_1_MASK          0x20   /* 0x84 <5> */
-#define PIN_MUX_MDAT_EN_2_MASK          0x40   /* 0x84 <6> */
-#define PIN_MUX_MDAT_EN_3_MASK          0x80   /* 0x84 <7> */
-#define PIN_MUX_MDAT_EN_4_MASK          0x10   /* 0x89 <4> */
-#define PIN_MUX_MDAT_EN_5_MASK          0x20   /* 0x89 <5> */
-#define PIN_MUX_MDAT_EN_6_MASK          0x40   /* 0x89 <6> */
-#define PIN_MUX_MDAT_EN_7_MASK          0x80   /* 0x89 <7> */
-
-int mxl111sf_config_pin_mux_modes(struct mxl111sf_state *state,
-				  enum mxl111sf_mux_config pin_mux_config)
-{
-	u8 r12, r15, r17, r18, r3D, r82, r84, r89;
-	int ret;
-
-	mxl_debug("(%d)", pin_mux_config);
-
-	ret = mxl111sf_read_reg(state, 0x17, &r17);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_read_reg(state, 0x18, &r18);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_read_reg(state, 0x12, &r12);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_read_reg(state, 0x15, &r15);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_read_reg(state, 0x82, &r82);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_read_reg(state, 0x84, &r84);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_read_reg(state, 0x89, &r89);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_read_reg(state, 0x3D, &r3D);
-	if (mxl_fail(ret))
-		goto fail;
-
-	switch (pin_mux_config) {
-	case PIN_MUX_TS_OUT_PARALLEL:
-		/* mpeg_mode = 1 */
-		r17 |= PIN_MUX_MPEG_MODE_MASK;
-		/* mpeg_par_en = 1 */
-		r18 |= PIN_MUX_MPEG_PAR_EN_MASK;
-		/* mpeg_ser_en = 0 */
-		r18 &= ~PIN_MUX_MPEG_SER_EN_MASK;
-		/* mpg_in_mux = 0 */
-		r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
-		/* bt656_enable = 0 */
-		r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
-		/* i2s_enable = 0 */
-		r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
-		/* spi_mode = 0 */
-		r3D &= ~PIN_MUX_SPI_MODE_MASK;
-		/* mclk_en_ctrl = 1 */
-		r82 |= PIN_MUX_MCLK_EN_CTRL_MASK;
-		/* mperr_en_ctrl = 1 */
-		r82 |= PIN_MUX_MPERR_EN_CTRL_MASK;
-		/* mdval_en_ctrl = 1 */
-		r82 |= PIN_MUX_MDVAL_EN_CTRL_MASK;
-		/* mpsyn_en_ctrl = 1 */
-		r82 |= PIN_MUX_MPSYN_EN_CTRL_MASK;
-		/* mdat_en_ctrl[3:0] = 0xF */
-		r84 |= 0xF0;
-		/* mdat_en_ctrl[7:4] = 0xF */
-		r89 |= 0xF0;
-		break;
-	case PIN_MUX_TS_OUT_SERIAL:
-		/* mpeg_mode = 1 */
-		r17 |= PIN_MUX_MPEG_MODE_MASK;
-		/* mpeg_par_en = 0 */
-		r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
-		/* mpeg_ser_en = 1 */
-		r18 |= PIN_MUX_MPEG_SER_EN_MASK;
-		/* mpg_in_mux = 0 */
-		r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
-		/* bt656_enable = 0 */
-		r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
-		/* i2s_enable = 0 */
-		r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
-		/* spi_mode = 0 */
-		r3D &= ~PIN_MUX_SPI_MODE_MASK;
-		/* mclk_en_ctrl = 1 */
-		r82 |= PIN_MUX_MCLK_EN_CTRL_MASK;
-		/* mperr_en_ctrl = 1 */
-		r82 |= PIN_MUX_MPERR_EN_CTRL_MASK;
-		/* mdval_en_ctrl = 1 */
-		r82 |= PIN_MUX_MDVAL_EN_CTRL_MASK;
-		/* mpsyn_en_ctrl = 1 */
-		r82 |= PIN_MUX_MPSYN_EN_CTRL_MASK;
-		/* mdat_en_ctrl[3:0] = 0xF */
-		r84 |= 0xF0;
-		/* mdat_en_ctrl[7:4] = 0xF */
-		r89 |= 0xF0;
-		break;
-	case PIN_MUX_GPIO_MODE:
-		/* mpeg_mode = 0 */
-		r17 &= ~PIN_MUX_MPEG_MODE_MASK;
-		/* mpeg_par_en = 0 */
-		r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
-		/* mpeg_ser_en = 0 */
-		r18 &= ~PIN_MUX_MPEG_SER_EN_MASK;
-		/* mpg_in_mux = 0 */
-		r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
-		/* bt656_enable = 0 */
-		r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
-		/* i2s_enable = 0 */
-		r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
-		/* spi_mode = 0 */
-		r3D &= ~PIN_MUX_SPI_MODE_MASK;
-		/* mclk_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
-		/* mperr_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
-		/* mdval_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
-		/* mpsyn_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
-		/* mdat_en_ctrl[3:0] = 0x0 */
-		r84 &= 0x0F;
-		/* mdat_en_ctrl[7:4] = 0x0 */
-		r89 &= 0x0F;
-		break;
-	case PIN_MUX_TS_SERIAL_IN_MODE_0:
-		/* mpeg_mode = 0 */
-		r17 &= ~PIN_MUX_MPEG_MODE_MASK;
-		/* mpeg_par_en = 0 */
-		r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
-		/* mpeg_ser_en = 1 */
-		r18 |= PIN_MUX_MPEG_SER_EN_MASK;
-		/* mpg_in_mux = 0 */
-		r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
-		/* bt656_enable = 0 */
-		r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
-		/* i2s_enable = 0 */
-		r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
-		/* spi_mode = 0 */
-		r3D &= ~PIN_MUX_SPI_MODE_MASK;
-		/* mclk_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
-		/* mperr_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
-		/* mdval_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
-		/* mpsyn_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
-		/* mdat_en_ctrl[3:0] = 0x0 */
-		r84 &= 0x0F;
-		/* mdat_en_ctrl[7:4] = 0x0 */
-		r89 &= 0x0F;
-		break;
-	case PIN_MUX_TS_SERIAL_IN_MODE_1:
-		/* mpeg_mode = 0 */
-		r17 &= ~PIN_MUX_MPEG_MODE_MASK;
-		/* mpeg_par_en = 0 */
-		r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
-		/* mpeg_ser_en = 1 */
-		r18 |= PIN_MUX_MPEG_SER_EN_MASK;
-		/* mpg_in_mux = 1 */
-		r3D |= PIN_MUX_MPG_IN_MUX_MASK;
-		/* bt656_enable = 0 */
-		r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
-		/* i2s_enable = 0 */
-		r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
-		/* spi_mode = 0 */
-		r3D &= ~PIN_MUX_SPI_MODE_MASK;
-		/* mclk_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
-		/* mperr_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
-		/* mdval_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
-		/* mpsyn_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
-		/* mdat_en_ctrl[3:0] = 0x0 */
-		r84 &= 0x0F;
-		/* mdat_en_ctrl[7:4] = 0x0 */
-		r89 &= 0x0F;
-		break;
-	case PIN_MUX_TS_SPI_IN_MODE_1:
-		/* mpeg_mode = 0 */
-		r17 &= ~PIN_MUX_MPEG_MODE_MASK;
-		/* mpeg_par_en = 0 */
-		r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
-		/* mpeg_ser_en = 1 */
-		r18 |= PIN_MUX_MPEG_SER_EN_MASK;
-		/* mpg_in_mux = 1 */
-		r3D |= PIN_MUX_MPG_IN_MUX_MASK;
-		/* bt656_enable = 0 */
-		r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
-		/* i2s_enable = 1 */
-		r15 |= PIN_MUX_I2S_ENABLE_MASK;
-		/* spi_mode = 1 */
-		r3D |= PIN_MUX_SPI_MODE_MASK;
-		/* mclk_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
-		/* mperr_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
-		/* mdval_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
-		/* mpsyn_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
-		/* mdat_en_ctrl[3:0] = 0x0 */
-		r84 &= 0x0F;
-		/* mdat_en_ctrl[7:4] = 0x0 */
-		r89 &= 0x0F;
-		break;
-	case PIN_MUX_TS_SPI_IN_MODE_0:
-		/* mpeg_mode = 0 */
-		r17 &= ~PIN_MUX_MPEG_MODE_MASK;
-		/* mpeg_par_en = 0 */
-		r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
-		/* mpeg_ser_en = 1 */
-		r18 |= PIN_MUX_MPEG_SER_EN_MASK;
-		/* mpg_in_mux = 0 */
-		r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
-		/* bt656_enable = 0 */
-		r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
-		/* i2s_enable = 1 */
-		r15 |= PIN_MUX_I2S_ENABLE_MASK;
-		/* spi_mode = 1 */
-		r3D |= PIN_MUX_SPI_MODE_MASK;
-		/* mclk_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
-		/* mperr_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
-		/* mdval_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
-		/* mpsyn_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
-		/* mdat_en_ctrl[3:0] = 0x0 */
-		r84 &= 0x0F;
-		/* mdat_en_ctrl[7:4] = 0x0 */
-		r89 &= 0x0F;
-		break;
-	case PIN_MUX_TS_PARALLEL_IN:
-		/* mpeg_mode = 0 */
-		r17 &= ~PIN_MUX_MPEG_MODE_MASK;
-		/* mpeg_par_en = 1 */
-		r18 |= PIN_MUX_MPEG_PAR_EN_MASK;
-		/* mpeg_ser_en = 0 */
-		r18 &= ~PIN_MUX_MPEG_SER_EN_MASK;
-		/* mpg_in_mux = 0 */
-		r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
-		/* bt656_enable = 0 */
-		r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
-		/* i2s_enable = 0 */
-		r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
-		/* spi_mode = 0 */
-		r3D &= ~PIN_MUX_SPI_MODE_MASK;
-		/* mclk_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
-		/* mperr_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
-		/* mdval_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
-		/* mpsyn_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
-		/* mdat_en_ctrl[3:0] = 0x0 */
-		r84 &= 0x0F;
-		/* mdat_en_ctrl[7:4] = 0x0 */
-		r89 &= 0x0F;
-		break;
-	case PIN_MUX_BT656_I2S_MODE:
-		/* mpeg_mode = 0 */
-		r17 &= ~PIN_MUX_MPEG_MODE_MASK;
-		/* mpeg_par_en = 0 */
-		r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
-		/* mpeg_ser_en = 0 */
-		r18 &= ~PIN_MUX_MPEG_SER_EN_MASK;
-		/* mpg_in_mux = 0 */
-		r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
-		/* bt656_enable = 1 */
-		r12 |= PIN_MUX_BT656_ENABLE_MASK;
-		/* i2s_enable = 1 */
-		r15 |= PIN_MUX_I2S_ENABLE_MASK;
-		/* spi_mode = 0 */
-		r3D &= ~PIN_MUX_SPI_MODE_MASK;
-		/* mclk_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
-		/* mperr_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
-		/* mdval_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
-		/* mpsyn_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
-		/* mdat_en_ctrl[3:0] = 0x0 */
-		r84 &= 0x0F;
-		/* mdat_en_ctrl[7:4] = 0x0 */
-		r89 &= 0x0F;
-		break;
-	case PIN_MUX_DEFAULT:
-	default:
-		/* mpeg_mode = 1 */
-		r17 |= PIN_MUX_MPEG_MODE_MASK;
-		/* mpeg_par_en = 0 */
-		r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
-		/* mpeg_ser_en = 0 */
-		r18 &= ~PIN_MUX_MPEG_SER_EN_MASK;
-		/* mpg_in_mux = 0 */
-		r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
-		/* bt656_enable = 0 */
-		r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
-		/* i2s_enable = 0 */
-		r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
-		/* spi_mode = 0 */
-		r3D &= ~PIN_MUX_SPI_MODE_MASK;
-		/* mclk_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
-		/* mperr_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
-		/* mdval_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
-		/* mpsyn_en_ctrl = 0 */
-		r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
-		/* mdat_en_ctrl[3:0] = 0x0 */
-		r84 &= 0x0F;
-		/* mdat_en_ctrl[7:4] = 0x0 */
-		r89 &= 0x0F;
-		break;
-	}
-
-	ret = mxl111sf_write_reg(state, 0x17, r17);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_write_reg(state, 0x18, r18);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_write_reg(state, 0x12, r12);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_write_reg(state, 0x15, r15);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_write_reg(state, 0x82, r82);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_write_reg(state, 0x84, r84);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_write_reg(state, 0x89, r89);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_write_reg(state, 0x3D, r3D);
-	if (mxl_fail(ret))
-		goto fail;
-fail:
-	return ret;
-}
-
-/* ------------------------------------------------------------------------- */
-
-static int mxl111sf_hw_set_gpio(struct mxl111sf_state *state, int gpio, int val)
-{
-	return mxl111sf_hw_do_set_gpio(state, gpio, MXL_GPIO_DIR_OUTPUT, val);
-}
-
-static int mxl111sf_hw_gpio_initialize(struct mxl111sf_state *state)
-{
-	u8 gpioval = 0x07; /* write protect enabled, signal LEDs off */
-	int i, ret;
-
-	mxl_debug("()");
-
-	for (i = 3; i < 8; i++) {
-		ret = mxl111sf_hw_set_gpio(state, i, (gpioval >> i) & 0x01);
-		if (mxl_fail(ret))
-			break;
-	}
-
-	return ret;
-}
-
-#define PCA9534_I2C_ADDR (0x40 >> 1)
-static int pca9534_set_gpio(struct mxl111sf_state *state, int gpio, int val)
-{
-	u8 w[2] = { 1, 0 };
-	u8 r = 0;
-	struct i2c_msg msg[] = {
-		{ .addr = PCA9534_I2C_ADDR,
-		  .flags = 0, .buf = w, .len = 1 },
-		{ .addr = PCA9534_I2C_ADDR,
-		  .flags = I2C_M_RD, .buf = &r, .len = 1 },
-	};
-
-	mxl_debug("(%d, %d)", gpio, val);
-
-	/* read current GPIO levels from flip-flop */
-	i2c_transfer(&state->d->i2c_adap, msg, 2);
-
-	/* prepare write buffer with current GPIO levels */
-	msg[0].len = 2;
-#if 0
-	w[0] = 1;
-#endif
-	w[1] = r;
-
-	/* clear the desired GPIO */
-	w[1] &= ~(1 << gpio);
-
-	/* set the desired GPIO value */
-	w[1] |= ((val ? 1 : 0) << gpio);
-
-	/* write new GPIO levels to flip-flop */
-	i2c_transfer(&state->d->i2c_adap, &msg[0], 1);
-
-	return 0;
-}
-
-static int pca9534_init_port_expander(struct mxl111sf_state *state)
-{
-	u8 w[2] = { 1, 0x07 }; /* write protect enabled, signal LEDs off */
-
-	struct i2c_msg msg = {
-		.addr = PCA9534_I2C_ADDR,
-		.flags = 0, .buf = w, .len = 2
-	};
-
-	mxl_debug("()");
-
-	i2c_transfer(&state->d->i2c_adap, &msg, 1);
-
-	/* configure all pins as outputs */
-	w[0] = 3;
-	w[1] = 0;
-
-	i2c_transfer(&state->d->i2c_adap, &msg, 1);
-
-	return 0;
-}
-
-int mxl111sf_set_gpio(struct mxl111sf_state *state, int gpio, int val)
-{
-	mxl_debug("(%d, %d)", gpio, val);
-
-	switch (state->gpio_port_expander) {
-	default:
-		mxl_printk(KERN_ERR,
-			   "gpio_port_expander undefined, assuming PCA9534");
-		/* fall-thru */
-	case mxl111sf_PCA9534:
-		return pca9534_set_gpio(state, gpio, val);
-	case mxl111sf_gpio_hw:
-		return mxl111sf_hw_set_gpio(state, gpio, val);
-	}
-}
-
-static int mxl111sf_probe_port_expander(struct mxl111sf_state *state)
-{
-	int ret;
-	u8 w = 1;
-	u8 r = 0;
-	struct i2c_msg msg[] = {
-		{ .flags = 0,        .buf = &w, .len = 1 },
-		{ .flags = I2C_M_RD, .buf = &r, .len = 1 },
-	};
-
-	mxl_debug("()");
-
-	msg[0].addr = 0x70 >> 1;
-	msg[1].addr = 0x70 >> 1;
-
-	/* read current GPIO levels from flip-flop */
-	ret = i2c_transfer(&state->d->i2c_adap, msg, 2);
-	if (ret == 2) {
-		state->port_expander_addr = msg[0].addr;
-		state->gpio_port_expander = mxl111sf_PCA9534;
-		mxl_debug("found port expander at 0x%02x",
-			  state->port_expander_addr);
-		return 0;
-	}
-
-	msg[0].addr = 0x40 >> 1;
-	msg[1].addr = 0x40 >> 1;
-
-	ret = i2c_transfer(&state->d->i2c_adap, msg, 2);
-	if (ret == 2) {
-		state->port_expander_addr = msg[0].addr;
-		state->gpio_port_expander = mxl111sf_PCA9534;
-		mxl_debug("found port expander at 0x%02x",
-			  state->port_expander_addr);
-		return 0;
-	}
-	state->port_expander_addr = 0xff;
-	state->gpio_port_expander = mxl111sf_gpio_hw;
-	mxl_debug("using hardware gpio");
-	return 0;
-}
-
-int mxl111sf_init_port_expander(struct mxl111sf_state *state)
-{
-	mxl_debug("()");
-
-	if (0x00 == state->port_expander_addr)
-		mxl111sf_probe_port_expander(state);
-
-	switch (state->gpio_port_expander) {
-	default:
-		mxl_printk(KERN_ERR,
-			   "gpio_port_expander undefined, assuming PCA9534");
-		/* fall-thru */
-	case mxl111sf_PCA9534:
-		return pca9534_init_port_expander(state);
-	case mxl111sf_gpio_hw:
-		return mxl111sf_hw_gpio_initialize(state);
-	}
-}
-
-/* ------------------------------------------------------------------------ */
-
-int mxl111sf_gpio_mode_switch(struct mxl111sf_state *state, unsigned int mode)
-{
-/*	GPO:
- *	3 - ATSC/MH#   | 1 = ATSC transport, 0 = MH transport      | default 0
- *	4 - ATSC_RST## | 1 = ATSC enable, 0 = ATSC Reset           | default 0
- *	5 - ATSC_EN    | 1 = ATSC power enable, 0 = ATSC power off | default 0
- *	6 - MH_RESET#  | 1 = MH enable, 0 = MH Reset               | default 0
- *	7 - MH_EN      | 1 = MH power enable, 0 = MH power off     | default 0
- */
-	mxl_debug("(%d)", mode);
-
-	switch (mode) {
-	case MXL111SF_GPIO_MOD_MH:
-		mxl111sf_set_gpio(state, 4, 0);
-		mxl111sf_set_gpio(state, 5, 0);
-		msleep(50);
-		mxl111sf_set_gpio(state, 7, 1);
-		msleep(50);
-		mxl111sf_set_gpio(state, 6, 1);
-		msleep(50);
-
-		mxl111sf_set_gpio(state, 3, 0);
-		break;
-	case MXL111SF_GPIO_MOD_ATSC:
-		mxl111sf_set_gpio(state, 6, 0);
-		mxl111sf_set_gpio(state, 7, 0);
-		msleep(50);
-		mxl111sf_set_gpio(state, 5, 1);
-		msleep(50);
-		mxl111sf_set_gpio(state, 4, 1);
-		msleep(50);
-		mxl111sf_set_gpio(state, 3, 1);
-		break;
-	default: /* DVBT / STANDBY */
-		mxl111sf_init_port_expander(state);
-		break;
-	}
-	return 0;
-}
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-gpio.h b/drivers/media/dvb/dvb-usb/mxl111sf-gpio.h
deleted file mode 100644
index 0220f54..0000000
--- a/drivers/media/dvb/dvb-usb/mxl111sf-gpio.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  mxl111sf-gpio.h - driver for the MaxLinear MXL111SF
- *
- *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _DVB_USB_MXL111SF_GPIO_H_
-#define _DVB_USB_MXL111SF_GPIO_H_
-
-#include "mxl111sf.h"
-
-int mxl111sf_set_gpio(struct mxl111sf_state *state, int gpio, int val);
-int mxl111sf_init_port_expander(struct mxl111sf_state *state);
-
-#define MXL111SF_GPIO_MOD_DVBT	0
-#define MXL111SF_GPIO_MOD_MH	1
-#define MXL111SF_GPIO_MOD_ATSC	2
-int mxl111sf_gpio_mode_switch(struct mxl111sf_state *state, unsigned int mode);
-
-enum mxl111sf_mux_config {
-	PIN_MUX_DEFAULT = 0,
-	PIN_MUX_TS_OUT_PARALLEL,
-	PIN_MUX_TS_OUT_SERIAL,
-	PIN_MUX_GPIO_MODE,
-	PIN_MUX_TS_SERIAL_IN_MODE_0,
-	PIN_MUX_TS_SERIAL_IN_MODE_1,
-	PIN_MUX_TS_SPI_IN_MODE_0,
-	PIN_MUX_TS_SPI_IN_MODE_1,
-	PIN_MUX_TS_PARALLEL_IN,
-	PIN_MUX_BT656_I2S_MODE,
-};
-
-int mxl111sf_config_pin_mux_modes(struct mxl111sf_state *state,
-				  enum mxl111sf_mux_config pin_mux_config);
-
-#endif /* _DVB_USB_MXL111SF_GPIO_H_ */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c
deleted file mode 100644
index 3443455..0000000
--- a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c
+++ /dev/null
@@ -1,850 +0,0 @@
-/*
- *  mxl111sf-i2c.c - driver for the MaxLinear MXL111SF
- *
- *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "mxl111sf-i2c.h"
-#include "mxl111sf.h"
-
-/* SW-I2C ----------------------------------------------------------------- */
-
-#define SW_I2C_ADDR		0x1a
-#define SW_I2C_EN		0x02
-#define SW_SCL_OUT		0x04
-#define SW_SDA_OUT		0x08
-#define SW_SDA_IN		0x04
-
-#define SW_I2C_BUSY_ADDR	0x2f
-#define SW_I2C_BUSY		0x02
-
-static int mxl111sf_i2c_bitbang_sendbyte(struct mxl111sf_state *state,
-					 u8 byte)
-{
-	int i, ret;
-	u8 data = 0;
-
-	mxl_i2c("(0x%02x)", byte);
-
-	ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data);
-	if (mxl_fail(ret))
-		goto fail;
-
-	for (i = 0; i < 8; i++) {
-
-		data = (byte & (0x80 >> i)) ? SW_SDA_OUT : 0;
-
-		ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-					 0x10 | SW_I2C_EN | data);
-		if (mxl_fail(ret))
-			goto fail;
-
-		ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-					 0x10 | SW_I2C_EN | data | SW_SCL_OUT);
-		if (mxl_fail(ret))
-			goto fail;
-
-		ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-					 0x10 | SW_I2C_EN | data);
-		if (mxl_fail(ret))
-			goto fail;
-	}
-
-	/* last bit was 0 so we need to release SDA */
-	if (!(byte & 1)) {
-		ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-					 0x10 | SW_I2C_EN | SW_SDA_OUT);
-		if (mxl_fail(ret))
-			goto fail;
-	}
-
-	/* CLK high for ACK readback */
-	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-				 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data);
-	if (mxl_fail(ret))
-		goto fail;
-
-	/* drop the CLK after getting ACK, SDA will go high right away */
-	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-				 0x10 | SW_I2C_EN | SW_SDA_OUT);
-	if (mxl_fail(ret))
-		goto fail;
-
-	if (data & SW_SDA_IN)
-		ret = -EIO;
-fail:
-	return ret;
-}
-
-static int mxl111sf_i2c_bitbang_recvbyte(struct mxl111sf_state *state,
-					 u8 *pbyte)
-{
-	int i, ret;
-	u8 byte = 0;
-	u8 data = 0;
-
-	mxl_i2c("()");
-
-	*pbyte = 0;
-
-	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-				 0x10 | SW_I2C_EN | SW_SDA_OUT);
-	if (mxl_fail(ret))
-		goto fail;
-
-	for (i = 0; i < 8; i++) {
-		ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-					 0x10 | SW_I2C_EN |
-					 SW_SCL_OUT | SW_SDA_OUT);
-		if (mxl_fail(ret))
-			goto fail;
-
-		ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data);
-		if (mxl_fail(ret))
-			goto fail;
-
-		if (data & SW_SDA_IN)
-			byte |= (0x80 >> i);
-
-		ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-					 0x10 | SW_I2C_EN | SW_SDA_OUT);
-		if (mxl_fail(ret))
-			goto fail;
-	}
-	*pbyte = byte;
-fail:
-	return ret;
-}
-
-static int mxl111sf_i2c_start(struct mxl111sf_state *state)
-{
-	int ret;
-
-	mxl_i2c("()");
-
-	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-				 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-				 0x10 | SW_I2C_EN | SW_SCL_OUT);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-				 0x10 | SW_I2C_EN); /* start */
-	mxl_fail(ret);
-fail:
-	return ret;
-}
-
-static int mxl111sf_i2c_stop(struct mxl111sf_state *state)
-{
-	int ret;
-
-	mxl_i2c("()");
-
-	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-				 0x10 | SW_I2C_EN); /* stop */
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-				 0x10 | SW_I2C_EN | SW_SCL_OUT);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-				 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-				 0x10 | SW_SCL_OUT | SW_SDA_OUT);
-	mxl_fail(ret);
-fail:
-	return ret;
-}
-
-static int mxl111sf_i2c_ack(struct mxl111sf_state *state)
-{
-	int ret;
-	u8 b = 0;
-
-	mxl_i2c("()");
-
-	ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &b);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-				 0x10 | SW_I2C_EN);
-	if (mxl_fail(ret))
-		goto fail;
-
-	/* pull SDA low */
-	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-				 0x10 | SW_I2C_EN | SW_SCL_OUT);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-				 0x10 | SW_I2C_EN | SW_SDA_OUT);
-	mxl_fail(ret);
-fail:
-	return ret;
-}
-
-static int mxl111sf_i2c_nack(struct mxl111sf_state *state)
-{
-	int ret;
-
-	mxl_i2c("()");
-
-	/* SDA high to signal last byte read from slave */
-	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-				 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
-				 0x10 | SW_I2C_EN | SW_SDA_OUT);
-	mxl_fail(ret);
-fail:
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int mxl111sf_i2c_sw_xfer_msg(struct mxl111sf_state *state,
-				    struct i2c_msg *msg)
-{
-	int i, ret;
-
-	mxl_i2c("()");
-
-	if (msg->flags & I2C_M_RD) {
-
-		ret = mxl111sf_i2c_start(state);
-		if (mxl_fail(ret))
-			goto fail;
-
-		ret = mxl111sf_i2c_bitbang_sendbyte(state,
-						    (msg->addr << 1) | 0x01);
-		if (mxl_fail(ret)) {
-			mxl111sf_i2c_stop(state);
-			goto fail;
-		}
-
-		for (i = 0; i < msg->len; i++) {
-			ret = mxl111sf_i2c_bitbang_recvbyte(state,
-							    &msg->buf[i]);
-			if (mxl_fail(ret)) {
-				mxl111sf_i2c_stop(state);
-				goto fail;
-			}
-
-			if (i < msg->len - 1)
-				mxl111sf_i2c_ack(state);
-		}
-
-		mxl111sf_i2c_nack(state);
-
-		ret = mxl111sf_i2c_stop(state);
-		if (mxl_fail(ret))
-			goto fail;
-
-	} else {
-
-		ret = mxl111sf_i2c_start(state);
-		if (mxl_fail(ret))
-			goto fail;
-
-		ret = mxl111sf_i2c_bitbang_sendbyte(state,
-						    (msg->addr << 1) & 0xfe);
-		if (mxl_fail(ret)) {
-			mxl111sf_i2c_stop(state);
-			goto fail;
-		}
-
-		for (i = 0; i < msg->len; i++) {
-			ret = mxl111sf_i2c_bitbang_sendbyte(state,
-							    msg->buf[i]);
-			if (mxl_fail(ret)) {
-				mxl111sf_i2c_stop(state);
-				goto fail;
-			}
-		}
-
-		/* FIXME: we only want to do this on the last transaction */
-		mxl111sf_i2c_stop(state);
-	}
-fail:
-	return ret;
-}
-
-/* HW-I2C ----------------------------------------------------------------- */
-
-#define USB_WRITE_I2C_CMD     0x99
-#define USB_READ_I2C_CMD      0xdd
-#define USB_END_I2C_CMD       0xfe
-
-#define USB_WRITE_I2C_CMD_LEN   26
-#define USB_READ_I2C_CMD_LEN    24
-
-#define I2C_MUX_REG           0x30
-#define I2C_CONTROL_REG       0x00
-#define I2C_SLAVE_ADDR_REG    0x08
-#define I2C_DATA_REG          0x0c
-#define I2C_INT_STATUS_REG    0x10
-
-static int mxl111sf_i2c_send_data(struct mxl111sf_state *state,
-				  u8 index, u8 *wdata)
-{
-	int ret = mxl111sf_ctrl_msg(state->d, wdata[0],
-				    &wdata[1], 25, NULL, 0);
-	mxl_fail(ret);
-
-	return ret;
-}
-
-static int mxl111sf_i2c_get_data(struct mxl111sf_state *state,
-				 u8 index, u8 *wdata, u8 *rdata)
-{
-	int ret = mxl111sf_ctrl_msg(state->d, wdata[0],
-				    &wdata[1], 25, rdata, 24);
-	mxl_fail(ret);
-
-	return ret;
-}
-
-static u8 mxl111sf_i2c_check_status(struct mxl111sf_state *state)
-{
-	u8 status = 0;
-	u8 buf[26];
-
-	mxl_i2c_adv("()");
-
-	buf[0] = USB_READ_I2C_CMD;
-	buf[1] = 0x00;
-
-	buf[2] = I2C_INT_STATUS_REG;
-	buf[3] = 0x00;
-	buf[4] = 0x00;
-
-	buf[5] = USB_END_I2C_CMD;
-
-	mxl111sf_i2c_get_data(state, 0, buf, buf);
-
-	if (buf[1] & 0x04)
-		status = 1;
-
-	return status;
-}
-
-static u8 mxl111sf_i2c_check_fifo(struct mxl111sf_state *state)
-{
-	u8 status = 0;
-	u8 buf[26];
-
-	mxl_i2c("()");
-
-	buf[0] = USB_READ_I2C_CMD;
-	buf[1] = 0x00;
-
-	buf[2] = I2C_MUX_REG;
-	buf[3] = 0x00;
-	buf[4] = 0x00;
-
-	buf[5] = I2C_INT_STATUS_REG;
-	buf[6] = 0x00;
-	buf[7] = 0x00;
-	buf[8] = USB_END_I2C_CMD;
-
-	mxl111sf_i2c_get_data(state, 0, buf, buf);
-
-	if (0x08 == (buf[1] & 0x08))
-		status = 1;
-
-	if ((buf[5] & 0x02) == 0x02)
-		mxl_i2c("(buf[5] & 0x02) == 0x02"); /* FIXME */
-
-	return status;
-}
-
-static int mxl111sf_i2c_readagain(struct mxl111sf_state *state,
-				  u8 count, u8 *rbuf)
-{
-	u8 i2c_w_data[26];
-	u8 i2c_r_data[24];
-	u8 i = 0;
-	u8 fifo_status = 0;
-	int status = 0;
-
-	mxl_i2c("read %d bytes", count);
-
-	while ((fifo_status == 0) && (i++ < 5))
-		fifo_status = mxl111sf_i2c_check_fifo(state);
-
-	i2c_w_data[0] = 0xDD;
-	i2c_w_data[1] = 0x00;
-
-	for (i = 2; i < 26; i++)
-		i2c_w_data[i] = 0xFE;
-
-	for (i = 0; i < count; i++) {
-		i2c_w_data[2+(i*3)] = 0x0C;
-		i2c_w_data[3+(i*3)] = 0x00;
-		i2c_w_data[4+(i*3)] = 0x00;
-	}
-
-	mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data);
-
-	/* Check for I2C NACK status */
-	if (mxl111sf_i2c_check_status(state) == 1) {
-		mxl_i2c("error!");
-	} else {
-		for (i = 0; i < count; i++) {
-			rbuf[i] = i2c_r_data[(i*3)+1];
-			mxl_i2c("%02x\t %02x",
-				i2c_r_data[(i*3)+1],
-				i2c_r_data[(i*3)+2]);
-		}
-
-		status = 1;
-	}
-
-	return status;
-}
-
-#define HWI2C400 1
-static int mxl111sf_i2c_hw_xfer_msg(struct mxl111sf_state *state,
-				    struct i2c_msg *msg)
-{
-	int i, k, ret = 0;
-	u16 index = 0;
-	u8 buf[26];
-	u8 i2c_r_data[24];
-	u16 block_len;
-	u16 left_over_len;
-	u8 rd_status[8];
-	u8 ret_status;
-	u8 readbuff[26];
-
-	mxl_i2c("addr: 0x%02x, read buff len: %d, write buff len: %d",
-		msg->addr, (msg->flags & I2C_M_RD) ? msg->len : 0,
-		(!(msg->flags & I2C_M_RD)) ? msg->len : 0);
-
-	for (index = 0; index < 26; index++)
-		buf[index] = USB_END_I2C_CMD;
-
-	/* command to indicate data payload is destined for I2C interface */
-	buf[0] = USB_WRITE_I2C_CMD;
-	buf[1] = 0x00;
-
-	/* enable I2C interface */
-	buf[2] = I2C_MUX_REG;
-	buf[3] = 0x80;
-	buf[4] = 0x00;
-
-	/* enable I2C interface */
-	buf[5] = I2C_MUX_REG;
-	buf[6] = 0x81;
-	buf[7] = 0x00;
-
-	/* set Timeout register on I2C interface */
-	buf[8] = 0x14;
-	buf[9] = 0xff;
-	buf[10] = 0x00;
-#if 0
-	/* enable Interrupts on I2C interface */
-	buf[8] = 0x24;
-	buf[9] = 0xF7;
-	buf[10] = 0x00;
-#endif
-	buf[11] = 0x24;
-	buf[12] = 0xF7;
-	buf[13] = 0x00;
-
-	ret = mxl111sf_i2c_send_data(state, 0, buf);
-
-	/* write data on I2C bus */
-	if (!(msg->flags & I2C_M_RD) && (msg->len > 0)) {
-		mxl_i2c("%d\t%02x", msg->len, msg->buf[0]);
-
-		/* control register on I2C interface to initialize I2C bus */
-		buf[2] = I2C_CONTROL_REG;
-		buf[3] = 0x5E;
-		buf[4] = (HWI2C400) ? 0x03 : 0x0D;
-
-		/* I2C Slave device Address */
-		buf[5] = I2C_SLAVE_ADDR_REG;
-		buf[6] = (msg->addr);
-		buf[7] = 0x00;
-		buf[8] = USB_END_I2C_CMD;
-		ret = mxl111sf_i2c_send_data(state, 0, buf);
-
-		/* check for slave device status */
-		if (mxl111sf_i2c_check_status(state) == 1) {
-			mxl_i2c("NACK writing slave address %02x",
-				msg->addr);
-			/* if NACK, stop I2C bus and exit */
-			buf[2] = I2C_CONTROL_REG;
-			buf[3] = 0x4E;
-			buf[4] = (HWI2C400) ? 0x03 : 0x0D;
-			ret = -EIO;
-			goto exit;
-		}
-
-		/* I2C interface can do I2C operations in block of 8 bytes of
-		   I2C data. calculation to figure out number of blocks of i2c
-		   data required to program */
-		block_len = (msg->len / 8);
-		left_over_len = (msg->len % 8);
-		index = 0;
-
-		mxl_i2c("block_len %d, left_over_len %d",
-			block_len, left_over_len);
-
-		for (index = 0; index < block_len; index++) {
-			for (i = 0; i < 8; i++) {
-				/* write data on I2C interface */
-				buf[2+(i*3)] = I2C_DATA_REG;
-				buf[3+(i*3)] = msg->buf[(index*8)+i];
-				buf[4+(i*3)] = 0x00;
-			}
-
-			ret = mxl111sf_i2c_send_data(state, 0, buf);
-
-			/* check for I2C NACK status */
-			if (mxl111sf_i2c_check_status(state) == 1) {
-				mxl_i2c("NACK writing slave address %02x",
-					msg->addr);
-
-				/* if NACK, stop I2C bus and exit */
-				buf[2] = I2C_CONTROL_REG;
-				buf[3] = 0x4E;
-				buf[4] = (HWI2C400) ? 0x03 : 0x0D;
-				ret = -EIO;
-				goto exit;
-			}
-
-		}
-
-		if (left_over_len) {
-			for (k = 0; k < 26; k++)
-				buf[k] = USB_END_I2C_CMD;
-
-			buf[0] = 0x99;
-			buf[1] = 0x00;
-
-			for (i = 0; i < left_over_len; i++) {
-				buf[2+(i*3)] = I2C_DATA_REG;
-				buf[3+(i*3)] = msg->buf[(index*8)+i];
-				mxl_i2c("index = %d %d data %d",
-					index, i, msg->buf[(index*8)+i]);
-				buf[4+(i*3)] = 0x00;
-			}
-			ret = mxl111sf_i2c_send_data(state, 0, buf);
-
-			/* check for I2C NACK status */
-			if (mxl111sf_i2c_check_status(state) == 1) {
-				mxl_i2c("NACK writing slave address %02x",
-					msg->addr);
-
-				/* if NACK, stop I2C bus and exit */
-				buf[2] = I2C_CONTROL_REG;
-				buf[3] = 0x4E;
-				buf[4] = (HWI2C400) ? 0x03 : 0x0D;
-				ret = -EIO;
-				goto exit;
-			}
-
-		}
-
-		/* issue I2C STOP after write */
-		buf[2] = I2C_CONTROL_REG;
-		buf[3] = 0x4E;
-		buf[4] = (HWI2C400) ? 0x03 : 0x0D;
-
-	}
-
-	/* read data from I2C bus */
-	if ((msg->flags & I2C_M_RD) && (msg->len > 0)) {
-		mxl_i2c("read buf len %d", msg->len);
-
-		/* command to indicate data payload is
-		   destined for I2C interface */
-		buf[2] = I2C_CONTROL_REG;
-		buf[3] = 0xDF;
-		buf[4] = (HWI2C400) ? 0x03 : 0x0D;
-
-		/* I2C xfer length */
-		buf[5] = 0x14;
-		buf[6] = (msg->len & 0xFF);
-		buf[7] = 0;
-
-		/* I2C slave device Address */
-		buf[8] = I2C_SLAVE_ADDR_REG;
-		buf[9] = msg->addr;
-		buf[10] = 0x00;
-		buf[11] = USB_END_I2C_CMD;
-		ret = mxl111sf_i2c_send_data(state, 0, buf);
-
-		/* check for I2C NACK status */
-		if (mxl111sf_i2c_check_status(state) == 1) {
-			mxl_i2c("NACK reading slave address %02x",
-				msg->addr);
-
-			/* if NACK, stop I2C bus and exit */
-			buf[2] = I2C_CONTROL_REG;
-			buf[3] = 0xC7;
-			buf[4] = (HWI2C400) ? 0x03 : 0x0D;
-			ret = -EIO;
-			goto exit;
-		}
-
-		/* I2C interface can do I2C operations in block of 8 bytes of
-		   I2C data. calculation to figure out number of blocks of
-		   i2c data required to program */
-		block_len = ((msg->len) / 8);
-		left_over_len = ((msg->len) % 8);
-		index = 0;
-
-		mxl_i2c("block_len %d, left_over_len %d",
-			block_len, left_over_len);
-
-		/* command to read data from I2C interface */
-		buf[0] = USB_READ_I2C_CMD;
-		buf[1] = 0x00;
-
-		for (index = 0; index < block_len; index++) {
-			/* setup I2C read request packet on I2C interface */
-			for (i = 0; i < 8; i++) {
-				buf[2+(i*3)] = I2C_DATA_REG;
-				buf[3+(i*3)] = 0x00;
-				buf[4+(i*3)] = 0x00;
-			}
-
-			ret = mxl111sf_i2c_get_data(state, 0, buf, i2c_r_data);
-
-			/* check for I2C NACK status */
-			if (mxl111sf_i2c_check_status(state) == 1) {
-				mxl_i2c("NACK reading slave address %02x",
-					msg->addr);
-
-				/* if NACK, stop I2C bus and exit */
-				buf[2] = I2C_CONTROL_REG;
-				buf[3] = 0xC7;
-				buf[4] = (HWI2C400) ? 0x03 : 0x0D;
-				ret = -EIO;
-				goto exit;
-			}
-
-			/* copy data from i2c data payload to read buffer */
-			for (i = 0; i < 8; i++) {
-				rd_status[i] = i2c_r_data[(i*3)+2];
-
-				if (rd_status[i] == 0x04) {
-					if (i < 7) {
-						mxl_i2c("i2c fifo empty!"
-							" @ %d", i);
-						msg->buf[(index*8)+i] =
-							i2c_r_data[(i*3)+1];
-						/* read again */
-						ret_status =
-							mxl111sf_i2c_readagain(
-								state, 8-(i+1),
-								readbuff);
-						if (ret_status == 1) {
-							for (k = 0;
-							     k < 8-(i+1);
-							     k++) {
-
-					msg->buf[(index*8)+(k+i+1)] =
-						readbuff[k];
-					mxl_i2c("read data: %02x\t %02x",
-						msg->buf[(index*8)+(k+i)],
-						(index*8)+(k+i));
-					mxl_i2c("read data: %02x\t %02x",
-						msg->buf[(index*8)+(k+i+1)],
-						readbuff[k]);
-
-							}
-							goto stop_copy;
-						} else {
-							mxl_i2c("readagain "
-								"ERROR!");
-						}
-					} else {
-						msg->buf[(index*8)+i] =
-							i2c_r_data[(i*3)+1];
-					}
-				} else {
-					msg->buf[(index*8)+i] =
-						i2c_r_data[(i*3)+1];
-				}
-			}
-stop_copy:
-			;
-
-		}
-
-		if (left_over_len) {
-			for (k = 0; k < 26; k++)
-				buf[k] = USB_END_I2C_CMD;
-
-			buf[0] = 0xDD;
-			buf[1] = 0x00;
-
-			for (i = 0; i < left_over_len; i++) {
-				buf[2+(i*3)] = I2C_DATA_REG;
-				buf[3+(i*3)] = 0x00;
-				buf[4+(i*3)] = 0x00;
-			}
-			ret = mxl111sf_i2c_get_data(state, 0, buf,
-						    i2c_r_data);
-
-			/* check for I2C NACK status */
-			if (mxl111sf_i2c_check_status(state) == 1) {
-				mxl_i2c("NACK reading slave address %02x",
-					msg->addr);
-
-				/* if NACK, stop I2C bus and exit */
-				buf[2] = I2C_CONTROL_REG;
-				buf[3] = 0xC7;
-				buf[4] = (HWI2C400) ? 0x03 : 0x0D;
-				ret = -EIO;
-				goto exit;
-			}
-
-			for (i = 0; i < left_over_len; i++) {
-				msg->buf[(block_len*8)+i] =
-					i2c_r_data[(i*3)+1];
-				mxl_i2c("read data: %02x\t %02x",
-					i2c_r_data[(i*3)+1],
-					i2c_r_data[(i*3)+2]);
-			}
-		}
-
-		/* indicate I2C interface to issue NACK
-		   after next I2C read op */
-		buf[0] = USB_WRITE_I2C_CMD;
-		buf[1] = 0x00;
-
-		/* control register */
-		buf[2] = I2C_CONTROL_REG;
-		buf[3] = 0x17;
-		buf[4] = (HWI2C400) ? 0x03 : 0x0D;
-
-		buf[5] = USB_END_I2C_CMD;
-		ret = mxl111sf_i2c_send_data(state, 0, buf);
-
-		/* control register */
-		buf[2] = I2C_CONTROL_REG;
-		buf[3] = 0xC7;
-		buf[4] = (HWI2C400) ? 0x03 : 0x0D;
-
-	}
-exit:
-	/* STOP and disable I2C MUX */
-	buf[0] = USB_WRITE_I2C_CMD;
-	buf[1] = 0x00;
-
-	/* de-initilize I2C BUS */
-	buf[5] = USB_END_I2C_CMD;
-	mxl111sf_i2c_send_data(state, 0, buf);
-
-	/* Control Register */
-	buf[2] = I2C_CONTROL_REG;
-	buf[3] = 0xDF;
-	buf[4] = 0x03;
-
-	/* disable I2C interface */
-	buf[5] = I2C_MUX_REG;
-	buf[6] = 0x00;
-	buf[7] = 0x00;
-
-	/* de-initilize I2C BUS */
-	buf[8] = USB_END_I2C_CMD;
-	mxl111sf_i2c_send_data(state, 0, buf);
-
-	/* disable I2C interface */
-	buf[2] = I2C_MUX_REG;
-	buf[3] = 0x81;
-	buf[4] = 0x00;
-
-	/* disable I2C interface */
-	buf[5] = I2C_MUX_REG;
-	buf[6] = 0x00;
-	buf[7] = 0x00;
-
-	/* disable I2C interface */
-	buf[8] = I2C_MUX_REG;
-	buf[9] = 0x00;
-	buf[10] = 0x00;
-
-	buf[11] = USB_END_I2C_CMD;
-	mxl111sf_i2c_send_data(state, 0, buf);
-
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-
-int mxl111sf_i2c_xfer(struct i2c_adapter *adap,
-		      struct i2c_msg msg[], int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	struct mxl111sf_state *state = d->priv;
-	int hwi2c = (state->chip_rev > MXL111SF_V6);
-	int i, ret;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	for (i = 0; i < num; i++) {
-		ret = (hwi2c) ?
-			mxl111sf_i2c_hw_xfer_msg(state, &msg[i]) :
-			mxl111sf_i2c_sw_xfer_msg(state, &msg[i]);
-		if (mxl_fail(ret)) {
-			mxl_debug_adv("failed with error %d on i2c "
-				      "transaction %d of %d, %sing %d bytes "
-				      "to/from 0x%02x", ret, i+1, num,
-				      (msg[i].flags & I2C_M_RD) ?
-				      "read" : "writ",
-				      msg[i].len, msg[i].addr);
-
-			break;
-		}
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-
-	return i == num ? num : -EREMOTEIO;
-}
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.h b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.h
deleted file mode 100644
index a57a45f..0000000
--- a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- *  mxl111sf-i2c.h - driver for the MaxLinear MXL111SF
- *
- *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _DVB_USB_MXL111SF_I2C_H_
-#define _DVB_USB_MXL111SF_I2C_H_
-
-#include <linux/i2c.h>
-
-int mxl111sf_i2c_xfer(struct i2c_adapter *adap,
-		      struct i2c_msg msg[], int num);
-
-#endif /* _DVB_USB_MXL111SF_I2C_H_ */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c
deleted file mode 100644
index b741b3a..0000000
--- a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c
+++ /dev/null
@@ -1,343 +0,0 @@
-/*
- *  mxl111sf-phy.c - driver for the MaxLinear MXL111SF
- *
- *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "mxl111sf-phy.h"
-#include "mxl111sf-reg.h"
-
-int mxl111sf_init_tuner_demod(struct mxl111sf_state *state)
-{
-	struct mxl111sf_reg_ctrl_info mxl_111_overwrite_default[] = {
-		{0x07, 0xff, 0x0c},
-		{0x58, 0xff, 0x9d},
-		{0x09, 0xff, 0x00},
-		{0x06, 0xff, 0x06},
-		{0xc8, 0xff, 0x40}, /* ED_LE_WIN_OLD = 0 */
-		{0x8d, 0x01, 0x01}, /* NEGATE_Q */
-		{0x32, 0xff, 0xac}, /* DIG_RFREFSELECT = 12 */
-		{0x42, 0xff, 0x43}, /* DIG_REG_AMP = 4 */
-		{0x74, 0xff, 0xc4}, /* SSPUR_FS_PRIO = 4 */
-		{0x71, 0xff, 0xe6}, /* SPUR_ROT_PRIO_VAL = 1 */
-		{0x83, 0xff, 0x64}, /* INF_FILT1_THD_SC = 100 */
-		{0x85, 0xff, 0x64}, /* INF_FILT2_THD_SC = 100 */
-		{0x88, 0xff, 0xf0}, /* INF_THD = 240 */
-		{0x6f, 0xf0, 0xb0}, /* DFE_DLY = 11 */
-		{0x00, 0xff, 0x01}, /* Change to page 1 */
-		{0x81, 0xff, 0x11}, /* DSM_FERR_BYPASS = 1 */
-		{0xf4, 0xff, 0x07}, /* DIG_FREQ_CORR = 1 */
-		{0xd4, 0x1f, 0x0f}, /* SPUR_TEST_NOISE_TH = 15 */
-		{0xd6, 0xff, 0x0c}, /* SPUR_TEST_NOISE_PAPR = 12 */
-		{0x00, 0xff, 0x00}, /* Change to page 0 */
-		{0,    0,    0}
-	};
-
-	mxl_debug("()");
-
-	return mxl111sf_ctrl_program_regs(state, mxl_111_overwrite_default);
-}
-
-int mxl1x1sf_soft_reset(struct mxl111sf_state *state)
-{
-	int ret;
-	mxl_debug("()");
-
-	ret = mxl111sf_write_reg(state, 0xff, 0x00); /* AIC */
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_write_reg(state, 0x02, 0x01); /* get out of reset */
-	mxl_fail(ret);
-fail:
-	return ret;
-}
-
-int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode)
-{
-	int ret;
-
-	mxl_debug("(%s)", MXL_SOC_MODE == mode ?
-		"MXL_SOC_MODE" : "MXL_TUNER_MODE");
-
-	/* set device mode */
-	ret = mxl111sf_write_reg(state, 0x03,
-				 MXL_SOC_MODE == mode ? 0x01 : 0x00);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_write_reg_mask(state,
-				      0x7d, 0x40, MXL_SOC_MODE == mode ?
-				      0x00 : /* enable impulse noise filter,
-						INF_BYP = 0 */
-				      0x40); /* disable impulse noise filter,
-						INF_BYP = 1 */
-	if (mxl_fail(ret))
-		goto fail;
-
-	state->device_mode = mode;
-fail:
-	return ret;
-}
-
-/* power up tuner */
-int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff)
-{
-	mxl_debug("(%d)", onoff);
-
-	return mxl111sf_write_reg(state, 0x01, onoff ? 0x01 : 0x00);
-}
-
-int mxl111sf_disable_656_port(struct mxl111sf_state *state)
-{
-	mxl_debug("()");
-
-	return mxl111sf_write_reg_mask(state, 0x12, 0x04, 0x00);
-}
-
-int mxl111sf_enable_usb_output(struct mxl111sf_state *state)
-{
-	mxl_debug("()");
-
-	return mxl111sf_write_reg_mask(state, 0x17, 0x40, 0x00);
-}
-
-/* initialize TSIF as input port of MxL1X1SF for MPEG2 data transfer */
-int mxl111sf_config_mpeg_in(struct mxl111sf_state *state,
-			    unsigned int parallel_serial,
-			    unsigned int msb_lsb_1st,
-			    unsigned int clock_phase,
-			    unsigned int mpeg_valid_pol,
-			    unsigned int mpeg_sync_pol)
-{
-	int ret;
-	u8 mode, tmp;
-
-	mxl_debug("(%u,%u,%u,%u,%u)", parallel_serial, msb_lsb_1st,
-		  clock_phase, mpeg_valid_pol, mpeg_sync_pol);
-
-	/* Enable PIN MUX */
-	ret = mxl111sf_write_reg(state, V6_PIN_MUX_MODE_REG, V6_ENABLE_PIN_MUX);
-	mxl_fail(ret);
-
-	/* Configure MPEG Clock phase */
-	mxl111sf_read_reg(state, V6_MPEG_IN_CLK_INV_REG, &mode);
-
-	if (clock_phase == TSIF_NORMAL)
-		mode &= ~V6_INVERTED_CLK_PHASE;
-	else
-		mode |= V6_INVERTED_CLK_PHASE;
-
-	ret = mxl111sf_write_reg(state, V6_MPEG_IN_CLK_INV_REG, mode);
-	mxl_fail(ret);
-
-	/* Configure data input mode, MPEG Valid polarity, MPEG Sync polarity
-	 * Get current configuration */
-	ret = mxl111sf_read_reg(state, V6_MPEG_IN_CTRL_REG, &mode);
-	mxl_fail(ret);
-
-	/* Data Input mode */
-	if (parallel_serial == TSIF_INPUT_PARALLEL) {
-		/* Disable serial mode */
-		mode &= ~V6_MPEG_IN_DATA_SERIAL;
-
-		/* Enable Parallel mode */
-		mode |= V6_MPEG_IN_DATA_PARALLEL;
-	} else {
-		/* Disable Parallel mode */
-		mode &= ~V6_MPEG_IN_DATA_PARALLEL;
-
-		/* Enable Serial Mode */
-		mode |= V6_MPEG_IN_DATA_SERIAL;
-
-		/* If serial interface is chosen, configure
-		   MSB or LSB order in transmission */
-		ret = mxl111sf_read_reg(state,
-					V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
-					&tmp);
-		mxl_fail(ret);
-
-		if (msb_lsb_1st == MPEG_SER_MSB_FIRST_ENABLED)
-			tmp |= V6_MPEG_SER_MSB_FIRST;
-		else
-			tmp &= ~V6_MPEG_SER_MSB_FIRST;
-
-		ret = mxl111sf_write_reg(state,
-					 V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
-					 tmp);
-		mxl_fail(ret);
-	}
-
-	/* MPEG Sync polarity */
-	if (mpeg_sync_pol == TSIF_NORMAL)
-		mode &= ~V6_INVERTED_MPEG_SYNC;
-	else
-		mode |= V6_INVERTED_MPEG_SYNC;
-
-	/* MPEG Valid polarity */
-	if (mpeg_valid_pol == 0)
-		mode &= ~V6_INVERTED_MPEG_VALID;
-	else
-		mode |= V6_INVERTED_MPEG_VALID;
-
-	ret = mxl111sf_write_reg(state, V6_MPEG_IN_CTRL_REG, mode);
-	mxl_fail(ret);
-
-	return ret;
-}
-
-int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size)
-{
-	static struct mxl111sf_reg_ctrl_info init_i2s[] = {
-		{0x1b, 0xff, 0x1e}, /* pin mux mode, Choose 656/I2S input */
-		{0x15, 0x60, 0x60}, /* Enable I2S */
-		{0x17, 0xe0, 0x20}, /* Input, MPEG MODE USB,
-				       Inverted 656 Clock, I2S_SOFT_RESET,
-				       0 : Normal operation, 1 : Reset State */
-#if 0
-		{0x12, 0x01, 0x00}, /* AUDIO_IRQ_CLR (Overflow Indicator) */
-#endif
-		{0x00, 0xff, 0x02}, /* Change to Control Page */
-		{0x26, 0x0d, 0x0d}, /* I2S_MODE & BT656_SRC_SEL for FPGA only */
-		{0x00, 0xff, 0x00},
-		{0,    0,    0}
-	};
-	int ret;
-
-	mxl_debug("(0x%02x)", sample_size);
-
-	ret = mxl111sf_ctrl_program_regs(state, init_i2s);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_write_reg(state, V6_I2S_NUM_SAMPLES_REG, sample_size);
-	mxl_fail(ret);
-fail:
-	return ret;
-}
-
-int mxl111sf_disable_i2s_port(struct mxl111sf_state *state)
-{
-	static struct mxl111sf_reg_ctrl_info disable_i2s[] = {
-		{0x15, 0x40, 0x00},
-		{0,    0,    0}
-	};
-
-	mxl_debug("()");
-
-	return mxl111sf_ctrl_program_regs(state, disable_i2s);
-}
-
-int mxl111sf_config_i2s(struct mxl111sf_state *state,
-			u8 msb_start_pos, u8 data_width)
-{
-	int ret;
-	u8 tmp;
-
-	mxl_debug("(0x%02x, 0x%02x)", msb_start_pos, data_width);
-
-	ret = mxl111sf_read_reg(state, V6_I2S_STREAM_START_BIT_REG, &tmp);
-	if (mxl_fail(ret))
-		goto fail;
-
-	tmp &= 0xe0;
-	tmp |= msb_start_pos;
-	ret = mxl111sf_write_reg(state, V6_I2S_STREAM_START_BIT_REG, tmp);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_read_reg(state, V6_I2S_STREAM_END_BIT_REG, &tmp);
-	if (mxl_fail(ret))
-		goto fail;
-
-	tmp &= 0xe0;
-	tmp |= data_width;
-	ret = mxl111sf_write_reg(state, V6_I2S_STREAM_END_BIT_REG, tmp);
-	mxl_fail(ret);
-fail:
-	return ret;
-}
-
-int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff)
-{
-	u8 val;
-	int ret;
-
-	mxl_debug("(%d)", onoff);
-
-	ret = mxl111sf_write_reg(state, 0x00, 0x02);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_read_reg(state, V8_SPI_MODE_REG, &val);
-	if (mxl_fail(ret))
-		goto fail;
-
-	if (onoff)
-		val |= 0x04;
-	else
-		val &= ~0x04;
-
-	ret = mxl111sf_write_reg(state, V8_SPI_MODE_REG, val);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_write_reg(state, 0x00, 0x00);
-	mxl_fail(ret);
-fail:
-	return ret;
-}
-
-int mxl111sf_idac_config(struct mxl111sf_state *state,
-			 u8 control_mode, u8 current_setting,
-			 u8 current_value, u8 hysteresis_value)
-{
-	int ret;
-	u8 val;
-	/* current value will be set for both automatic & manual IDAC control */
-	val = current_value;
-
-	if (control_mode == IDAC_MANUAL_CONTROL) {
-		/* enable manual control of IDAC */
-		val |= IDAC_MANUAL_CONTROL_BIT_MASK;
-
-		if (current_setting == IDAC_CURRENT_SINKING_ENABLE)
-			/* enable current sinking in manual mode */
-			val |= IDAC_CURRENT_SINKING_BIT_MASK;
-		else
-			/* disable current sinking in manual mode */
-			val &= ~IDAC_CURRENT_SINKING_BIT_MASK;
-	} else {
-		/* disable manual control of IDAC */
-		val &= ~IDAC_MANUAL_CONTROL_BIT_MASK;
-
-		/* set hysteresis value  reg: 0x0B<5:0> */
-		ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG,
-					 (hysteresis_value & 0x3F));
-		mxl_fail(ret);
-	}
-
-	ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val);
-	mxl_fail(ret);
-
-	return ret;
-}
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.h b/drivers/media/dvb/dvb-usb/mxl111sf-phy.h
deleted file mode 100644
index f075607..0000000
--- a/drivers/media/dvb/dvb-usb/mxl111sf-phy.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  mxl111sf-phy.h - driver for the MaxLinear MXL111SF
- *
- *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _DVB_USB_MXL111SF_PHY_H_
-#define _DVB_USB_MXL111SF_PHY_H_
-
-#include "mxl111sf.h"
-
-int mxl1x1sf_soft_reset(struct mxl111sf_state *state);
-int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode);
-int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff);
-int mxl111sf_disable_656_port(struct mxl111sf_state *state);
-int mxl111sf_init_tuner_demod(struct mxl111sf_state *state);
-int mxl111sf_enable_usb_output(struct mxl111sf_state *state);
-int mxl111sf_config_mpeg_in(struct mxl111sf_state *state,
-			    unsigned int parallel_serial,
-			    unsigned int msb_lsb_1st,
-			    unsigned int clock_phase,
-			    unsigned int mpeg_valid_pol,
-			    unsigned int mpeg_sync_pol);
-int mxl111sf_config_i2s(struct mxl111sf_state *state,
-			u8 msb_start_pos, u8 data_width);
-int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size);
-int mxl111sf_disable_i2s_port(struct mxl111sf_state *state);
-int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff);
-int mxl111sf_idac_config(struct mxl111sf_state *state,
-			 u8 control_mode, u8 current_setting,
-			 u8 current_value, u8 hysteresis_value);
-
-#endif /* _DVB_USB_MXL111SF_PHY_H_ */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-reg.h b/drivers/media/dvb/dvb-usb/mxl111sf-reg.h
deleted file mode 100644
index 17831b0..0000000
--- a/drivers/media/dvb/dvb-usb/mxl111sf-reg.h
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- *  mxl111sf-reg.h - driver for the MaxLinear MXL111SF
- *
- *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _DVB_USB_MXL111SF_REG_H_
-#define _DVB_USB_MXL111SF_REG_H_
-
-#define CHIP_ID_REG                  0xFC
-#define TOP_CHIP_REV_ID_REG          0xFA
-
-#define V6_SNR_RB_LSB_REG            0x27
-#define V6_SNR_RB_MSB_REG            0x28
-
-#define V6_N_ACCUMULATE_REG          0x11
-#define V6_RS_AVG_ERRORS_LSB_REG     0x2C
-#define V6_RS_AVG_ERRORS_MSB_REG     0x2D
-
-#define V6_IRQ_STATUS_REG            0x24
-#define  IRQ_MASK_FEC_LOCK       0x10
-
-#define V6_SYNC_LOCK_REG             0x28
-#define SYNC_LOCK_MASK           0x10
-
-#define V6_RS_LOCK_DET_REG           0x28
-#define  RS_LOCK_DET_MASK        0x08
-
-#define V6_INITACQ_NODETECT_REG    0x20
-#define V6_FORCE_NFFT_CPSIZE_REG   0x20
-
-#define V6_CODE_RATE_TPS_REG       0x29
-#define V6_CODE_RATE_TPS_MASK      0x07
-
-
-#define V6_CP_LOCK_DET_REG        0x28
-#define V6_CP_LOCK_DET_MASK       0x04
-
-#define V6_TPS_HIERACHY_REG        0x29
-#define V6_TPS_HIERARCHY_INFO_MASK  0x40
-
-#define V6_MODORDER_TPS_REG        0x2A
-#define V6_PARAM_CONSTELLATION_MASK   0x30
-
-#define V6_MODE_TPS_REG            0x2A
-#define V6_PARAM_FFT_MODE_MASK        0x0C
-
-
-#define V6_CP_TPS_REG             0x29
-#define V6_PARAM_GI_MASK              0x30
-
-#define V6_TPS_LOCK_REG           0x2A
-#define V6_PARAM_TPS_LOCK_MASK        0x40
-
-#define V6_FEC_PER_COUNT_REG      0x2E
-#define V6_FEC_PER_SCALE_REG      0x2B
-#define V6_FEC_PER_SCALE_MASK        0x03
-#define V6_FEC_PER_CLR_REG        0x20
-#define V6_FEC_PER_CLR_MASK          0x01
-
-#define V6_PIN_MUX_MODE_REG       0x1B
-#define V6_ENABLE_PIN_MUX            0x1E
-
-#define V6_I2S_NUM_SAMPLES_REG    0x16
-
-#define V6_MPEG_IN_CLK_INV_REG    0x17
-#define V6_MPEG_IN_CTRL_REG       0x18
-
-#define V6_INVERTED_CLK_PHASE       0x20
-#define V6_MPEG_IN_DATA_PARALLEL    0x01
-#define V6_MPEG_IN_DATA_SERIAL      0x02
-
-#define V6_INVERTED_MPEG_SYNC       0x04
-#define V6_INVERTED_MPEG_VALID      0x08
-
-#define TSIF_INPUT_PARALLEL         0
-#define TSIF_INPUT_SERIAL           1
-#define TSIF_NORMAL                 0
-
-#define V6_MPEG_INOUT_BIT_ORDER_CTRL_REG  0x19
-#define V6_MPEG_SER_MSB_FIRST                0x80
-#define MPEG_SER_MSB_FIRST_ENABLED        0x01
-
-#define V6_656_I2S_BUFF_STATUS_REG   0x2F
-#define V6_656_OVERFLOW_MASK_BIT         0x08
-#define V6_I2S_OVERFLOW_MASK_BIT         0x01
-
-#define V6_I2S_STREAM_START_BIT_REG  0x14
-#define V6_I2S_STREAM_END_BIT_REG    0x15
-#define I2S_RIGHT_JUSTIFIED     0
-#define I2S_LEFT_JUSTIFIED      1
-#define I2S_DATA_FORMAT         2
-
-#define V6_TUNER_LOOP_THRU_CONTROL_REG  0x09
-#define V6_ENABLE_LOOP_THRU               0x01
-
-#define TOTAL_NUM_IF_OUTPUT_FREQ       16
-
-#define TUNER_NORMAL_IF_SPECTRUM       0x0
-#define TUNER_INVERT_IF_SPECTRUM       0x10
-
-#define V6_TUNER_IF_SEL_REG              0x06
-#define V6_TUNER_IF_FCW_REG              0x3C
-#define V6_TUNER_IF_FCW_BYP_REG          0x3D
-#define V6_RF_LOCK_STATUS_REG            0x23
-
-#define NUM_DIG_TV_CHANNEL     1000
-
-#define V6_DIG_CLK_FREQ_SEL_REG  0x07
-#define V6_REF_SYNTH_INT_REG     0x5C
-#define V6_REF_SYNTH_REMAIN_REG  0x58
-#define V6_DIG_RFREFSELECT_REG   0x32
-#define V6_XTAL_CLK_OUT_GAIN_REG   0x31
-#define V6_TUNER_LOOP_THRU_CTRL_REG      0x09
-#define V6_DIG_XTAL_ENABLE_REG  0x06
-#define V6_DIG_XTAL_BIAS_REG  0x66
-#define V6_XTAL_CAP_REG    0x08
-
-#define V6_GPO_CTRL_REG     0x18
-#define MXL_GPO_0           0x00
-#define MXL_GPO_1           0x01
-#define V6_GPO_0_MASK       0x10
-#define V6_GPO_1_MASK       0x20
-
-#define V6_111SF_GPO_CTRL_REG     0x19
-#define MXL_111SF_GPO_1               0x00
-#define MXL_111SF_GPO_2               0x01
-#define MXL_111SF_GPO_3               0x02
-#define MXL_111SF_GPO_4               0x03
-#define MXL_111SF_GPO_5               0x04
-#define MXL_111SF_GPO_6               0x05
-#define MXL_111SF_GPO_7               0x06
-
-#define MXL_111SF_GPO_0_MASK          0x01
-#define MXL_111SF_GPO_1_MASK          0x02
-#define MXL_111SF_GPO_2_MASK          0x04
-#define MXL_111SF_GPO_3_MASK          0x08
-#define MXL_111SF_GPO_4_MASK          0x10
-#define MXL_111SF_GPO_5_MASK          0x20
-#define MXL_111SF_GPO_6_MASK          0x40
-
-#define V6_ATSC_CONFIG_REG  0x0A
-
-#define MXL_MODE_REG    0x03
-#define START_TUNE_REG  0x1C
-
-#define V6_IDAC_HYSTERESIS_REG    0x0B
-#define V6_IDAC_SETTINGS_REG      0x0C
-#define IDAC_MANUAL_CONTROL             1
-#define IDAC_CURRENT_SINKING_ENABLE     1
-#define IDAC_MANUAL_CONTROL_BIT_MASK      0x80
-#define IDAC_CURRENT_SINKING_BIT_MASK     0x40
-
-#define V8_SPI_MODE_REG  0xE9
-
-#define V6_DIG_RF_PWR_LSB_REG  0x46
-#define V6_DIG_RF_PWR_MSB_REG  0x47
-
-#endif /* _DVB_USB_MXL111SF_REG_H_ */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-tuner.c b/drivers/media/dvb/dvb-usb/mxl111sf-tuner.c
deleted file mode 100644
index 74da5bb1..0000000
--- a/drivers/media/dvb/dvb-usb/mxl111sf-tuner.c
+++ /dev/null
@@ -1,525 +0,0 @@
-/*
- *  mxl111sf-tuner.c - driver for the MaxLinear MXL111SF CMOS tuner
- *
- *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "mxl111sf-tuner.h"
-#include "mxl111sf-phy.h"
-#include "mxl111sf-reg.h"
-
-/* debug */
-static int mxl111sf_tuner_debug;
-module_param_named(debug, mxl111sf_tuner_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able)).");
-
-#define mxl_dbg(fmt, arg...) \
-	if (mxl111sf_tuner_debug) \
-		mxl_printk(KERN_DEBUG, fmt, ##arg)
-
-/* ------------------------------------------------------------------------ */
-
-struct mxl111sf_tuner_state {
-	struct mxl111sf_state *mxl_state;
-
-	struct mxl111sf_tuner_config *cfg;
-
-	enum mxl_if_freq if_freq;
-
-	u32 frequency;
-	u32 bandwidth;
-};
-
-static int mxl111sf_tuner_read_reg(struct mxl111sf_tuner_state *state,
-				   u8 addr, u8 *data)
-{
-	return (state->cfg->read_reg) ?
-		state->cfg->read_reg(state->mxl_state, addr, data) :
-		-EINVAL;
-}
-
-static int mxl111sf_tuner_write_reg(struct mxl111sf_tuner_state *state,
-				    u8 addr, u8 data)
-{
-	return (state->cfg->write_reg) ?
-		state->cfg->write_reg(state->mxl_state, addr, data) :
-		-EINVAL;
-}
-
-static int mxl111sf_tuner_program_regs(struct mxl111sf_tuner_state *state,
-			       struct mxl111sf_reg_ctrl_info *ctrl_reg_info)
-{
-	return (state->cfg->program_regs) ?
-		state->cfg->program_regs(state->mxl_state, ctrl_reg_info) :
-		-EINVAL;
-}
-
-static int mxl1x1sf_tuner_top_master_ctrl(struct mxl111sf_tuner_state *state,
-					  int onoff)
-{
-	return (state->cfg->top_master_ctrl) ?
-		state->cfg->top_master_ctrl(state->mxl_state, onoff) :
-		-EINVAL;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static struct mxl111sf_reg_ctrl_info mxl_phy_tune_rf[] = {
-	{0x1d, 0x7f, 0x00}, /* channel bandwidth section 1/2/3,
-			       DIG_MODEINDEX, _A, _CSF, */
-	{0x1e, 0xff, 0x00}, /* channel frequency (lo and fractional) */
-	{0x1f, 0xff, 0x00}, /* channel frequency (hi for integer portion) */
-	{0,    0,    0}
-};
-
-/* ------------------------------------------------------------------------ */
-
-static struct mxl111sf_reg_ctrl_info *mxl111sf_calc_phy_tune_regs(u32 freq,
-								  u8 bw)
-{
-	u8 filt_bw;
-
-	/* set channel bandwidth */
-	switch (bw) {
-	case 0: /* ATSC */
-		filt_bw = 25;
-		break;
-	case 1: /* QAM */
-		filt_bw = 69;
-		break;
-	case 6:
-		filt_bw = 21;
-		break;
-	case 7:
-		filt_bw = 42;
-		break;
-	case 8:
-		filt_bw = 63;
-		break;
-	default:
-		err("%s: invalid bandwidth setting!", __func__);
-		return NULL;
-	}
-
-	/* calculate RF channel */
-	freq /= 1000000;
-
-	freq *= 64;
-#if 0
-	/* do round */
-	freq += 0.5;
-#endif
-	/* set bandwidth */
-	mxl_phy_tune_rf[0].data = filt_bw;
-
-	/* set RF */
-	mxl_phy_tune_rf[1].data = (freq & 0xff);
-	mxl_phy_tune_rf[2].data = (freq >> 8) & 0xff;
-
-	/* start tune */
-	return mxl_phy_tune_rf;
-}
-
-static int mxl1x1sf_tuner_set_if_output_freq(struct mxl111sf_tuner_state *state)
-{
-	int ret;
-	u8 ctrl;
-#if 0
-	u16 iffcw;
-	u32 if_freq;
-#endif
-	mxl_dbg("(IF polarity = %d, IF freq = 0x%02x)",
-		state->cfg->invert_spectrum, state->cfg->if_freq);
-
-	/* set IF polarity */
-	ctrl = state->cfg->invert_spectrum;
-
-	ctrl |= state->cfg->if_freq;
-
-	ret = mxl111sf_tuner_write_reg(state, V6_TUNER_IF_SEL_REG, ctrl);
-	if (mxl_fail(ret))
-		goto fail;
-
-#if 0
-	if_freq /= 1000000;
-
-	/* do round */
-	if_freq += 0.5;
-
-	if (MXL_IF_LO == state->cfg->if_freq) {
-		ctrl = 0x08;
-		iffcw = (u16)(if_freq / (108 * 4096));
-	} else if (MXL_IF_HI == state->cfg->if_freq) {
-		ctrl = 0x08;
-		iffcw = (u16)(if_freq / (216 * 4096));
-	} else {
-		ctrl = 0;
-		iffcw = 0;
-	}
-
-	ctrl |= (iffcw >> 8);
-#endif
-	ret = mxl111sf_tuner_read_reg(state, V6_TUNER_IF_FCW_BYP_REG, &ctrl);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ctrl &= 0xf0;
-	ctrl |= 0x90;
-
-	ret = mxl111sf_tuner_write_reg(state, V6_TUNER_IF_FCW_BYP_REG, ctrl);
-	if (mxl_fail(ret))
-		goto fail;
-
-#if 0
-	ctrl = iffcw & 0x00ff;
-#endif
-	ret = mxl111sf_tuner_write_reg(state, V6_TUNER_IF_FCW_REG, ctrl);
-	if (mxl_fail(ret))
-		goto fail;
-
-	state->if_freq = state->cfg->if_freq;
-fail:
-	return ret;
-}
-
-static int mxl1x1sf_tune_rf(struct dvb_frontend *fe, u32 freq, u8 bw)
-{
-	struct mxl111sf_tuner_state *state = fe->tuner_priv;
-	static struct mxl111sf_reg_ctrl_info *reg_ctrl_array;
-	int ret;
-	u8 mxl_mode;
-
-	mxl_dbg("(freq = %d, bw = 0x%x)", freq, bw);
-
-	/* stop tune */
-	ret = mxl111sf_tuner_write_reg(state, START_TUNE_REG, 0);
-	if (mxl_fail(ret))
-		goto fail;
-
-	/* check device mode */
-	ret = mxl111sf_tuner_read_reg(state, MXL_MODE_REG, &mxl_mode);
-	if (mxl_fail(ret))
-		goto fail;
-
-	/* Fill out registers for channel tune */
-	reg_ctrl_array = mxl111sf_calc_phy_tune_regs(freq, bw);
-	if (!reg_ctrl_array)
-		return -EINVAL;
-
-	ret = mxl111sf_tuner_program_regs(state, reg_ctrl_array);
-	if (mxl_fail(ret))
-		goto fail;
-
-	if ((mxl_mode & MXL_DEV_MODE_MASK) == MXL_TUNER_MODE) {
-		/* IF tuner mode only */
-		mxl1x1sf_tuner_top_master_ctrl(state, 0);
-		mxl1x1sf_tuner_top_master_ctrl(state, 1);
-		mxl1x1sf_tuner_set_if_output_freq(state);
-	}
-
-	ret = mxl111sf_tuner_write_reg(state, START_TUNE_REG, 1);
-	if (mxl_fail(ret))
-		goto fail;
-
-	if (state->cfg->ant_hunt)
-		state->cfg->ant_hunt(fe);
-fail:
-	return ret;
-}
-
-static int mxl1x1sf_tuner_get_lock_status(struct mxl111sf_tuner_state *state,
-					  int *rf_synth_lock,
-					  int *ref_synth_lock)
-{
-	int ret;
-	u8 data;
-
-	*rf_synth_lock = 0;
-	*ref_synth_lock = 0;
-
-	ret = mxl111sf_tuner_read_reg(state, V6_RF_LOCK_STATUS_REG, &data);
-	if (mxl_fail(ret))
-		goto fail;
-
-	*ref_synth_lock = ((data & 0x03) == 0x03) ? 1 : 0;
-	*rf_synth_lock  = ((data & 0x0c) == 0x0c) ? 1 : 0;
-fail:
-	return ret;
-}
-
-#if 0
-static int mxl1x1sf_tuner_loop_thru_ctrl(struct mxl111sf_tuner_state *state,
-					 int onoff)
-{
-	return mxl111sf_tuner_write_reg(state, V6_TUNER_LOOP_THRU_CTRL_REG,
-					onoff ? 1 : 0);
-}
-#endif
-
-/* ------------------------------------------------------------------------ */
-
-static int mxl111sf_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	u32 delsys  = c->delivery_system;
-	struct mxl111sf_tuner_state *state = fe->tuner_priv;
-	int ret;
-	u8 bw;
-
-	mxl_dbg("()");
-
-	switch (delsys) {
-	case SYS_ATSC:
-	case SYS_ATSCMH:
-		bw = 0; /* ATSC */
-		break;
-	case SYS_DVBC_ANNEX_B:
-		bw = 1; /* US CABLE */
-		break;
-	case SYS_DVBT:
-		switch (c->bandwidth_hz) {
-		case 6000000:
-			bw = 6;
-			break;
-		case 7000000:
-			bw = 7;
-			break;
-		case 8000000:
-			bw = 8;
-			break;
-		default:
-			err("%s: bandwidth not set!", __func__);
-			return -EINVAL;
-		}
-		break;
-	default:
-		err("%s: modulation type not supported!", __func__);
-		return -EINVAL;
-	}
-	ret = mxl1x1sf_tune_rf(fe, c->frequency, bw);
-	if (mxl_fail(ret))
-		goto fail;
-
-	state->frequency = c->frequency;
-	state->bandwidth = c->bandwidth_hz;
-fail:
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-
-#if 0
-static int mxl111sf_tuner_init(struct dvb_frontend *fe)
-{
-	struct mxl111sf_tuner_state *state = fe->tuner_priv;
-	int ret;
-
-	/* wake from standby handled by usb driver */
-
-	return ret;
-}
-
-static int mxl111sf_tuner_sleep(struct dvb_frontend *fe)
-{
-	struct mxl111sf_tuner_state *state = fe->tuner_priv;
-	int ret;
-
-	/* enter standby mode handled by usb driver */
-
-	return ret;
-}
-#endif
-
-/* ------------------------------------------------------------------------ */
-
-static int mxl111sf_tuner_get_status(struct dvb_frontend *fe, u32 *status)
-{
-	struct mxl111sf_tuner_state *state = fe->tuner_priv;
-	int rf_locked, ref_locked, ret;
-
-	*status = 0;
-
-	ret = mxl1x1sf_tuner_get_lock_status(state, &rf_locked, &ref_locked);
-	if (mxl_fail(ret))
-		goto fail;
-	mxl_info("%s%s", rf_locked ? "rf locked " : "",
-		 ref_locked ? "ref locked" : "");
-
-	if ((rf_locked) || (ref_locked))
-		*status |= TUNER_STATUS_LOCKED;
-fail:
-	return ret;
-}
-
-static int mxl111sf_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	struct mxl111sf_tuner_state *state = fe->tuner_priv;
-	u8 val1, val2;
-	int ret;
-
-	*strength = 0;
-
-	ret = mxl111sf_tuner_write_reg(state, 0x00, 0x02);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_tuner_read_reg(state, V6_DIG_RF_PWR_LSB_REG, &val1);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_tuner_read_reg(state, V6_DIG_RF_PWR_MSB_REG, &val2);
-	if (mxl_fail(ret))
-		goto fail;
-
-	*strength = val1 | ((val2 & 0x07) << 8);
-fail:
-	ret = mxl111sf_tuner_write_reg(state, 0x00, 0x00);
-	mxl_fail(ret);
-
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int mxl111sf_tuner_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
-	struct mxl111sf_tuner_state *state = fe->tuner_priv;
-	*frequency = state->frequency;
-	return 0;
-}
-
-static int mxl111sf_tuner_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
-{
-	struct mxl111sf_tuner_state *state = fe->tuner_priv;
-	*bandwidth = state->bandwidth;
-	return 0;
-}
-
-static int mxl111sf_tuner_get_if_frequency(struct dvb_frontend *fe,
-					   u32 *frequency)
-{
-	struct mxl111sf_tuner_state *state = fe->tuner_priv;
-
-	*frequency = 0;
-
-	switch (state->if_freq) {
-	case MXL_IF_4_0:   /* 4.0   MHz */
-		*frequency = 4000000;
-		break;
-	case MXL_IF_4_5:   /* 4.5   MHz */
-		*frequency = 4500000;
-		break;
-	case MXL_IF_4_57:  /* 4.57  MHz */
-		*frequency = 4570000;
-		break;
-	case MXL_IF_5_0:   /* 5.0   MHz */
-		*frequency = 5000000;
-		break;
-	case MXL_IF_5_38:  /* 5.38  MHz */
-		*frequency = 5380000;
-		break;
-	case MXL_IF_6_0:   /* 6.0   MHz */
-		*frequency = 6000000;
-		break;
-	case MXL_IF_6_28:  /* 6.28  MHz */
-		*frequency = 6280000;
-		break;
-	case MXL_IF_7_2:   /* 7.2   MHz */
-		*frequency = 7200000;
-		break;
-	case MXL_IF_35_25: /* 35.25 MHz */
-		*frequency = 35250000;
-		break;
-	case MXL_IF_36:    /* 36    MHz */
-		*frequency = 36000000;
-		break;
-	case MXL_IF_36_15: /* 36.15 MHz */
-		*frequency = 36150000;
-		break;
-	case MXL_IF_44:    /* 44    MHz */
-		*frequency = 44000000;
-		break;
-	}
-	return 0;
-}
-
-static int mxl111sf_tuner_release(struct dvb_frontend *fe)
-{
-	struct mxl111sf_tuner_state *state = fe->tuner_priv;
-	mxl_dbg("()");
-	kfree(state);
-	fe->tuner_priv = NULL;
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-static struct dvb_tuner_ops mxl111sf_tuner_tuner_ops = {
-	.info = {
-		.name = "MaxLinear MxL111SF",
-#if 0
-		.frequency_min  = ,
-		.frequency_max  = ,
-		.frequency_step = ,
-#endif
-	},
-#if 0
-	.init              = mxl111sf_tuner_init,
-	.sleep             = mxl111sf_tuner_sleep,
-#endif
-	.set_params        = mxl111sf_tuner_set_params,
-	.get_status        = mxl111sf_tuner_get_status,
-	.get_rf_strength   = mxl111sf_get_rf_strength,
-	.get_frequency     = mxl111sf_tuner_get_frequency,
-	.get_bandwidth     = mxl111sf_tuner_get_bandwidth,
-	.get_if_frequency  = mxl111sf_tuner_get_if_frequency,
-	.release           = mxl111sf_tuner_release,
-};
-
-struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
-					   struct mxl111sf_state *mxl_state,
-					   struct mxl111sf_tuner_config *cfg)
-{
-	struct mxl111sf_tuner_state *state = NULL;
-
-	mxl_dbg("()");
-
-	state = kzalloc(sizeof(struct mxl111sf_tuner_state), GFP_KERNEL);
-	if (state == NULL)
-		return NULL;
-
-	state->mxl_state = mxl_state;
-	state->cfg = cfg;
-
-	memcpy(&fe->ops.tuner_ops, &mxl111sf_tuner_tuner_ops,
-	       sizeof(struct dvb_tuner_ops));
-
-	fe->tuner_priv = state;
-	return fe;
-}
-EXPORT_SYMBOL_GPL(mxl111sf_tuner_attach);
-
-MODULE_DESCRIPTION("MaxLinear MxL111SF CMOS tuner driver");
-MODULE_AUTHOR("Michael Krufky <mkrufky@kernellabs.com>");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("0.1");
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-tuner.h b/drivers/media/dvb/dvb-usb/mxl111sf-tuner.h
deleted file mode 100644
index ff33396..0000000
--- a/drivers/media/dvb/dvb-usb/mxl111sf-tuner.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- *  mxl111sf-tuner.h - driver for the MaxLinear MXL111SF CMOS tuner
- *
- *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MXL111SF_TUNER_H__
-#define __MXL111SF_TUNER_H__
-
-#include "dvb_frontend.h"
-
-#include "mxl111sf.h"
-
-enum mxl_if_freq {
-#if 0
-	MXL_IF_LO    = 0x00, /* other IF < 9MHz */
-#endif
-	MXL_IF_4_0   = 0x01, /* 4.0   MHz */
-	MXL_IF_4_5   = 0x02, /* 4.5   MHz */
-	MXL_IF_4_57  = 0x03, /* 4.57  MHz */
-	MXL_IF_5_0   = 0x04, /* 5.0   MHz */
-	MXL_IF_5_38  = 0x05, /* 5.38  MHz */
-	MXL_IF_6_0   = 0x06, /* 6.0   MHz */
-	MXL_IF_6_28  = 0x07, /* 6.28  MHz */
-	MXL_IF_7_2   = 0x08, /* 7.2   MHz */
-	MXL_IF_35_25 = 0x09, /* 35.25 MHz */
-	MXL_IF_36    = 0x0a, /* 36    MHz */
-	MXL_IF_36_15 = 0x0b, /* 36.15 MHz */
-	MXL_IF_44    = 0x0c, /* 44    MHz */
-#if 0
-	MXL_IF_HI    = 0x0f, /* other IF > 35 MHz and < 45 MHz */
-#endif
-};
-
-struct mxl111sf_tuner_config {
-	enum mxl_if_freq if_freq;
-	unsigned int invert_spectrum:1;
-
-	int (*read_reg)(struct mxl111sf_state *state, u8 addr, u8 *data);
-	int (*write_reg)(struct mxl111sf_state *state, u8 addr, u8 data);
-	int (*program_regs)(struct mxl111sf_state *state,
-			    struct mxl111sf_reg_ctrl_info *ctrl_reg_info);
-	int (*top_master_ctrl)(struct mxl111sf_state *state, int onoff);
-	int (*ant_hunt)(struct dvb_frontend *fe);
-};
-
-/* ------------------------------------------------------------------------ */
-
-#if defined(CONFIG_DVB_USB_MXL111SF) || \
-	(defined(CONFIG_DVB_USB_MXL111SF_MODULE) && defined(MODULE))
-extern
-struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
-					   struct mxl111sf_state *mxl_state,
-					   struct mxl111sf_tuner_config *cfg);
-#else
-static inline
-struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
-					   struct mxl111sf_state *mxl_state
-					   struct mxl111sf_tuner_config *cfg)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif /* __MXL111SF_TUNER_H__ */
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
-
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf.c b/drivers/media/dvb/dvb-usb/mxl111sf.c
deleted file mode 100644
index cd84279..0000000
--- a/drivers/media/dvb/dvb-usb/mxl111sf.c
+++ /dev/null
@@ -1,1835 +0,0 @@
-/*
- * Copyright (C) 2010 Michael Krufky (mkrufky@kernellabs.com)
- *
- *   This program is free software; you can redistribute it and/or modify it
- *   under the terms of the GNU General Public License as published by the Free
- *   Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-
-#include <linux/vmalloc.h>
-#include <linux/i2c.h>
-
-#include "mxl111sf.h"
-#include "mxl111sf-reg.h"
-#include "mxl111sf-phy.h"
-#include "mxl111sf-i2c.h"
-#include "mxl111sf-gpio.h"
-
-#include "mxl111sf-demod.h"
-#include "mxl111sf-tuner.h"
-
-#include "lgdt3305.h"
-#include "lg2160.h"
-
-int dvb_usb_mxl111sf_debug;
-module_param_named(debug, dvb_usb_mxl111sf_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level "
-		 "(1=info, 2=xfer, 4=i2c, 8=reg, 16=adv (or-able)).");
-
-int dvb_usb_mxl111sf_isoc;
-module_param_named(isoc, dvb_usb_mxl111sf_isoc, int, 0644);
-MODULE_PARM_DESC(isoc, "enable usb isoc xfer (0=bulk, 1=isoc).");
-
-int dvb_usb_mxl111sf_spi;
-module_param_named(spi, dvb_usb_mxl111sf_spi, int, 0644);
-MODULE_PARM_DESC(spi, "use spi rather than tp for data xfer (0=tp, 1=spi).");
-
-#define ANT_PATH_AUTO 0
-#define ANT_PATH_EXTERNAL 1
-#define ANT_PATH_INTERNAL 2
-
-int dvb_usb_mxl111sf_rfswitch =
-#if 0
-		ANT_PATH_AUTO;
-#else
-		ANT_PATH_EXTERNAL;
-#endif
-
-module_param_named(rfswitch, dvb_usb_mxl111sf_rfswitch, int, 0644);
-MODULE_PARM_DESC(rfswitch, "force rf switch position (0=auto, 1=ext, 2=int).");
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-#define deb_info(args...)   dprintk(dvb_usb_mxl111sf_debug, 0x13, args)
-#define deb_reg(args...)    dprintk(dvb_usb_mxl111sf_debug, 0x08, args)
-#define deb_adv(args...)    dprintk(dvb_usb_mxl111sf_debug, MXL_ADV_DBG, args)
-
-int mxl111sf_ctrl_msg(struct dvb_usb_device *d,
-		      u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen)
-{
-	int wo = (rbuf == NULL || rlen == 0); /* write-only */
-	int ret;
-	u8 sndbuf[1+wlen];
-
-	deb_adv("%s(wlen = %d, rlen = %d)\n", __func__, wlen, rlen);
-
-	memset(sndbuf, 0, 1+wlen);
-
-	sndbuf[0] = cmd;
-	memcpy(&sndbuf[1], wbuf, wlen);
-
-	ret = (wo) ? dvb_usb_generic_write(d, sndbuf, 1+wlen) :
-		dvb_usb_generic_rw(d, sndbuf, 1+wlen, rbuf, rlen, 0);
-	mxl_fail(ret);
-
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-
-#define MXL_CMD_REG_READ	0xaa
-#define MXL_CMD_REG_WRITE	0x55
-
-int mxl111sf_read_reg(struct mxl111sf_state *state, u8 addr, u8 *data)
-{
-	u8 buf[2];
-	int ret;
-
-	ret = mxl111sf_ctrl_msg(state->d, MXL_CMD_REG_READ, &addr, 1, buf, 2);
-	if (mxl_fail(ret)) {
-		mxl_debug("error reading reg: 0x%02x", addr);
-		goto fail;
-	}
-
-	if (buf[0] == addr)
-		*data = buf[1];
-	else {
-		err("invalid response reading reg: 0x%02x != 0x%02x, 0x%02x",
-		    addr, buf[0], buf[1]);
-		ret = -EINVAL;
-	}
-
-	deb_reg("R: (0x%02x, 0x%02x)\n", addr, *data);
-fail:
-	return ret;
-}
-
-int mxl111sf_write_reg(struct mxl111sf_state *state, u8 addr, u8 data)
-{
-	u8 buf[] = { addr, data };
-	int ret;
-
-	deb_reg("W: (0x%02x, 0x%02x)\n", addr, data);
-
-	ret = mxl111sf_ctrl_msg(state->d, MXL_CMD_REG_WRITE, buf, 2, NULL, 0);
-	if (mxl_fail(ret))
-		err("error writing reg: 0x%02x, val: 0x%02x", addr, data);
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-
-int mxl111sf_write_reg_mask(struct mxl111sf_state *state,
-				   u8 addr, u8 mask, u8 data)
-{
-	int ret;
-	u8 val;
-
-	if (mask != 0xff) {
-		ret = mxl111sf_read_reg(state, addr, &val);
-#if 1
-		/* dont know why this usually errors out on the first try */
-		if (mxl_fail(ret))
-			err("error writing addr: 0x%02x, mask: 0x%02x, "
-			    "data: 0x%02x, retrying...", addr, mask, data);
-
-		ret = mxl111sf_read_reg(state, addr, &val);
-#endif
-		if (mxl_fail(ret))
-			goto fail;
-	}
-	val &= ~mask;
-	val |= data;
-
-	ret = mxl111sf_write_reg(state, addr, val);
-	mxl_fail(ret);
-fail:
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-
-int mxl111sf_ctrl_program_regs(struct mxl111sf_state *state,
-			       struct mxl111sf_reg_ctrl_info *ctrl_reg_info)
-{
-	int i, ret = 0;
-
-	for (i = 0;  ctrl_reg_info[i].addr |
-		     ctrl_reg_info[i].mask |
-		     ctrl_reg_info[i].data;  i++) {
-
-		ret = mxl111sf_write_reg_mask(state,
-					      ctrl_reg_info[i].addr,
-					      ctrl_reg_info[i].mask,
-					      ctrl_reg_info[i].data);
-		if (mxl_fail(ret)) {
-			err("failed on reg #%d (0x%02x)", i,
-			    ctrl_reg_info[i].addr);
-			break;
-		}
-	}
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int mxl1x1sf_get_chip_info(struct mxl111sf_state *state)
-{
-	int ret;
-	u8 id, ver;
-	char *mxl_chip, *mxl_rev;
-
-	if ((state->chip_id) && (state->chip_ver))
-		return 0;
-
-	ret = mxl111sf_read_reg(state, CHIP_ID_REG, &id);
-	if (mxl_fail(ret))
-		goto fail;
-	state->chip_id = id;
-
-	ret = mxl111sf_read_reg(state, TOP_CHIP_REV_ID_REG, &ver);
-	if (mxl_fail(ret))
-		goto fail;
-	state->chip_ver = ver;
-
-	switch (id) {
-	case 0x61:
-		mxl_chip = "MxL101SF";
-		break;
-	case 0x63:
-		mxl_chip = "MxL111SF";
-		break;
-	default:
-		mxl_chip = "UNKNOWN MxL1X1";
-		break;
-	}
-	switch (ver) {
-	case 0x36:
-		state->chip_rev = MXL111SF_V6;
-		mxl_rev = "v6";
-		break;
-	case 0x08:
-		state->chip_rev = MXL111SF_V8_100;
-		mxl_rev = "v8_100";
-		break;
-	case 0x18:
-		state->chip_rev = MXL111SF_V8_200;
-		mxl_rev = "v8_200";
-		break;
-	default:
-		state->chip_rev = 0;
-		mxl_rev = "UNKNOWN REVISION";
-		break;
-	}
-	info("%s detected, %s (0x%x)", mxl_chip, mxl_rev, ver);
-fail:
-	return ret;
-}
-
-#define get_chip_info(state)						\
-({									\
-	int ___ret;							\
-	___ret = mxl1x1sf_get_chip_info(state);				\
-	if (mxl_fail(___ret)) {						\
-		mxl_debug("failed to get chip info"			\
-			  " on first probe attempt");			\
-		___ret = mxl1x1sf_get_chip_info(state);			\
-		if (mxl_fail(___ret))					\
-			err("failed to get chip info during probe");	\
-		else							\
-			mxl_debug("probe needed a retry "		\
-				  "in order to succeed.");		\
-	}								\
-	___ret;								\
-})
-
-/* ------------------------------------------------------------------------ */
-
-static int mxl111sf_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	/* power control depends on which adapter is being woken:
-	 * save this for init, instead, via mxl111sf_adap_fe_init */
-	return 0;
-}
-
-static int mxl111sf_adap_fe_init(struct dvb_frontend *fe)
-{
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct dvb_usb_device *d = adap->dev;
-	struct mxl111sf_state *state = d->priv;
-	struct mxl111sf_adap_state *adap_state = adap->fe_adap[fe->id].priv;
-
-	int err;
-
-	/* exit if we didnt initialize the driver yet */
-	if (!state->chip_id) {
-		mxl_debug("driver not yet initialized, exit.");
-		goto fail;
-	}
-
-	deb_info("%s()\n", __func__);
-
-	mutex_lock(&state->fe_lock);
-
-	state->alt_mode = adap_state->alt_mode;
-
-	if (usb_set_interface(adap->dev->udev, 0, state->alt_mode) < 0)
-		err("set interface failed");
-
-	err = mxl1x1sf_soft_reset(state);
-	mxl_fail(err);
-	err = mxl111sf_init_tuner_demod(state);
-	mxl_fail(err);
-	err = mxl1x1sf_set_device_mode(state, adap_state->device_mode);
-
-	mxl_fail(err);
-	mxl111sf_enable_usb_output(state);
-	mxl_fail(err);
-	mxl1x1sf_top_master_ctrl(state, 1);
-	mxl_fail(err);
-
-	if ((MXL111SF_GPIO_MOD_DVBT != adap_state->gpio_mode) &&
-	    (state->chip_rev > MXL111SF_V6)) {
-		mxl111sf_config_pin_mux_modes(state,
-					      PIN_MUX_TS_SPI_IN_MODE_1);
-		mxl_fail(err);
-	}
-	err = mxl111sf_init_port_expander(state);
-	if (!mxl_fail(err)) {
-		state->gpio_mode = adap_state->gpio_mode;
-		err = mxl111sf_gpio_mode_switch(state, state->gpio_mode);
-		mxl_fail(err);
-#if 0
-		err = fe->ops.init(fe);
-#endif
-		msleep(100); /* add short delay after enabling
-			      * the demod before touching it */
-	}
-
-	return (adap_state->fe_init) ? adap_state->fe_init(fe) : 0;
-fail:
-	return -ENODEV;
-}
-
-static int mxl111sf_adap_fe_sleep(struct dvb_frontend *fe)
-{
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct dvb_usb_device *d = adap->dev;
-	struct mxl111sf_state *state = d->priv;
-	struct mxl111sf_adap_state *adap_state = adap->fe_adap[fe->id].priv;
-	int err;
-
-	/* exit if we didnt initialize the driver yet */
-	if (!state->chip_id) {
-		mxl_debug("driver not yet initialized, exit.");
-		goto fail;
-	}
-
-	deb_info("%s()\n", __func__);
-
-	err = (adap_state->fe_sleep) ? adap_state->fe_sleep(fe) : 0;
-
-	mutex_unlock(&state->fe_lock);
-
-	return err;
-fail:
-	return -ENODEV;
-}
-
-
-static int mxl111sf_ep6_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	struct dvb_usb_device *d = adap->dev;
-	struct mxl111sf_state *state = d->priv;
-	struct mxl111sf_adap_state *adap_state = adap->fe_adap[adap->active_fe].priv;
-	int ret = 0;
-
-	deb_info("%s(%d)\n", __func__, onoff);
-
-	if (onoff) {
-		ret = mxl111sf_enable_usb_output(state);
-		mxl_fail(ret);
-		ret = mxl111sf_config_mpeg_in(state, 1, 1,
-					      adap_state->ep6_clockphase,
-					      0, 0);
-		mxl_fail(ret);
-#if 0
-	} else {
-		ret = mxl111sf_disable_656_port(state);
-		mxl_fail(ret);
-#endif
-	}
-
-	return ret;
-}
-
-static int mxl111sf_ep5_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	struct dvb_usb_device *d = adap->dev;
-	struct mxl111sf_state *state = d->priv;
-	int ret = 0;
-
-	deb_info("%s(%d)\n", __func__, onoff);
-
-	if (onoff) {
-		ret = mxl111sf_enable_usb_output(state);
-		mxl_fail(ret);
-
-		ret = mxl111sf_init_i2s_port(state, 200);
-		mxl_fail(ret);
-		ret = mxl111sf_config_i2s(state, 0, 15);
-		mxl_fail(ret);
-	} else {
-		ret = mxl111sf_disable_i2s_port(state);
-		mxl_fail(ret);
-	}
-	if (state->chip_rev > MXL111SF_V6)
-		ret = mxl111sf_config_spi(state, onoff);
-	mxl_fail(ret);
-
-	return ret;
-}
-
-static int mxl111sf_ep4_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	struct dvb_usb_device *d = adap->dev;
-	struct mxl111sf_state *state = d->priv;
-	int ret = 0;
-
-	deb_info("%s(%d)\n", __func__, onoff);
-
-	if (onoff) {
-		ret = mxl111sf_enable_usb_output(state);
-		mxl_fail(ret);
-	}
-
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static struct lgdt3305_config hauppauge_lgdt3305_config = {
-	.i2c_addr           = 0xb2 >> 1,
-	.mpeg_mode          = LGDT3305_MPEG_SERIAL,
-	.tpclk_edge         = LGDT3305_TPCLK_RISING_EDGE,
-	.tpvalid_polarity   = LGDT3305_TP_VALID_HIGH,
-	.deny_i2c_rptr      = 1,
-	.spectral_inversion = 0,
-	.qam_if_khz         = 6000,
-	.vsb_if_khz         = 6000,
-};
-
-static int mxl111sf_lgdt3305_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct dvb_usb_device *d = adap->dev;
-	struct mxl111sf_state *state = d->priv;
-	int fe_id = adap->num_frontends_initialized;
-	struct mxl111sf_adap_state *adap_state = adap->fe_adap[fe_id].priv;
-	int ret;
-
-	deb_adv("%s()\n", __func__);
-
-	/* save a pointer to the dvb_usb_device in device state */
-	state->d = d;
-	adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1;
-	state->alt_mode = adap_state->alt_mode;
-
-	if (usb_set_interface(adap->dev->udev, 0, state->alt_mode) < 0)
-		err("set interface failed");
-
-	state->gpio_mode = MXL111SF_GPIO_MOD_ATSC;
-	adap_state->gpio_mode = state->gpio_mode;
-	adap_state->device_mode = MXL_TUNER_MODE;
-	adap_state->ep6_clockphase = 1;
-
-	ret = mxl1x1sf_soft_reset(state);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_init_tuner_demod(state);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_enable_usb_output(state);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl1x1sf_top_master_ctrl(state, 1);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_init_port_expander(state);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode);
-	if (mxl_fail(ret))
-		goto fail;
-
-	adap->fe_adap[fe_id].fe = dvb_attach(lgdt3305_attach,
-				 &hauppauge_lgdt3305_config,
-				 &adap->dev->i2c_adap);
-	if (adap->fe_adap[fe_id].fe) {
-		adap_state->fe_init = adap->fe_adap[fe_id].fe->ops.init;
-		adap->fe_adap[fe_id].fe->ops.init = mxl111sf_adap_fe_init;
-		adap_state->fe_sleep = adap->fe_adap[fe_id].fe->ops.sleep;
-		adap->fe_adap[fe_id].fe->ops.sleep = mxl111sf_adap_fe_sleep;
-		return 0;
-	}
-	ret = -EIO;
-fail:
-	return ret;
-}
-
-static struct lg2160_config hauppauge_lg2160_config = {
-	.lg_chip            = LG2160,
-	.i2c_addr           = 0x1c >> 1,
-	.deny_i2c_rptr      = 1,
-	.spectral_inversion = 0,
-	.if_khz             = 6000,
-};
-
-static int mxl111sf_lg2160_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct dvb_usb_device *d = adap->dev;
-	struct mxl111sf_state *state = d->priv;
-	int fe_id = adap->num_frontends_initialized;
-	struct mxl111sf_adap_state *adap_state = adap->fe_adap[fe_id].priv;
-	int ret;
-
-	deb_adv("%s()\n", __func__);
-
-	/* save a pointer to the dvb_usb_device in device state */
-	state->d = d;
-	adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1;
-	state->alt_mode = adap_state->alt_mode;
-
-	if (usb_set_interface(adap->dev->udev, 0, state->alt_mode) < 0)
-		err("set interface failed");
-
-	state->gpio_mode = MXL111SF_GPIO_MOD_MH;
-	adap_state->gpio_mode = state->gpio_mode;
-	adap_state->device_mode = MXL_TUNER_MODE;
-	adap_state->ep6_clockphase = 1;
-
-	ret = mxl1x1sf_soft_reset(state);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_init_tuner_demod(state);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_enable_usb_output(state);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl1x1sf_top_master_ctrl(state, 1);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_init_port_expander(state);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = get_chip_info(state);
-	if (mxl_fail(ret))
-		goto fail;
-
-	adap->fe_adap[fe_id].fe = dvb_attach(lg2160_attach,
-			      &hauppauge_lg2160_config,
-			      &adap->dev->i2c_adap);
-	if (adap->fe_adap[fe_id].fe) {
-		adap_state->fe_init = adap->fe_adap[fe_id].fe->ops.init;
-		adap->fe_adap[fe_id].fe->ops.init = mxl111sf_adap_fe_init;
-		adap_state->fe_sleep = adap->fe_adap[fe_id].fe->ops.sleep;
-		adap->fe_adap[fe_id].fe->ops.sleep = mxl111sf_adap_fe_sleep;
-		return 0;
-	}
-	ret = -EIO;
-fail:
-	return ret;
-}
-
-static struct lg2160_config hauppauge_lg2161_1019_config = {
-	.lg_chip            = LG2161_1019,
-	.i2c_addr           = 0x1c >> 1,
-	.deny_i2c_rptr      = 1,
-	.spectral_inversion = 0,
-	.if_khz             = 6000,
-	.output_if          = 2, /* LG2161_OIF_SPI_MAS */
-};
-
-static struct lg2160_config hauppauge_lg2161_1040_config = {
-	.lg_chip            = LG2161_1040,
-	.i2c_addr           = 0x1c >> 1,
-	.deny_i2c_rptr      = 1,
-	.spectral_inversion = 0,
-	.if_khz             = 6000,
-	.output_if          = 4, /* LG2161_OIF_SPI_MAS */
-};
-
-static int mxl111sf_lg2161_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct dvb_usb_device *d = adap->dev;
-	struct mxl111sf_state *state = d->priv;
-	int fe_id = adap->num_frontends_initialized;
-	struct mxl111sf_adap_state *adap_state = adap->fe_adap[fe_id].priv;
-	int ret;
-
-	deb_adv("%s()\n", __func__);
-
-	/* save a pointer to the dvb_usb_device in device state */
-	state->d = d;
-	adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1;
-	state->alt_mode = adap_state->alt_mode;
-
-	if (usb_set_interface(adap->dev->udev, 0, state->alt_mode) < 0)
-		err("set interface failed");
-
-	state->gpio_mode = MXL111SF_GPIO_MOD_MH;
-	adap_state->gpio_mode = state->gpio_mode;
-	adap_state->device_mode = MXL_TUNER_MODE;
-	adap_state->ep6_clockphase = 1;
-
-	ret = mxl1x1sf_soft_reset(state);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_init_tuner_demod(state);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_enable_usb_output(state);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl1x1sf_top_master_ctrl(state, 1);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_init_port_expander(state);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = get_chip_info(state);
-	if (mxl_fail(ret))
-		goto fail;
-
-	adap->fe_adap[fe_id].fe = dvb_attach(lg2160_attach,
-			      (MXL111SF_V8_200 == state->chip_rev) ?
-			      &hauppauge_lg2161_1040_config :
-			      &hauppauge_lg2161_1019_config,
-			      &adap->dev->i2c_adap);
-	if (adap->fe_adap[fe_id].fe) {
-		adap_state->fe_init = adap->fe_adap[fe_id].fe->ops.init;
-		adap->fe_adap[fe_id].fe->ops.init = mxl111sf_adap_fe_init;
-		adap_state->fe_sleep = adap->fe_adap[fe_id].fe->ops.sleep;
-		adap->fe_adap[fe_id].fe->ops.sleep = mxl111sf_adap_fe_sleep;
-		return 0;
-	}
-	ret = -EIO;
-fail:
-	return ret;
-}
-
-static struct lg2160_config hauppauge_lg2161_1019_ep6_config = {
-	.lg_chip            = LG2161_1019,
-	.i2c_addr           = 0x1c >> 1,
-	.deny_i2c_rptr      = 1,
-	.spectral_inversion = 0,
-	.if_khz             = 6000,
-	.output_if          = 1, /* LG2161_OIF_SERIAL_TS */
-};
-
-static struct lg2160_config hauppauge_lg2161_1040_ep6_config = {
-	.lg_chip            = LG2161_1040,
-	.i2c_addr           = 0x1c >> 1,
-	.deny_i2c_rptr      = 1,
-	.spectral_inversion = 0,
-	.if_khz             = 6000,
-	.output_if          = 7, /* LG2161_OIF_SERIAL_TS */
-};
-
-static int mxl111sf_lg2161_ep6_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct dvb_usb_device *d = adap->dev;
-	struct mxl111sf_state *state = d->priv;
-	int fe_id = adap->num_frontends_initialized;
-	struct mxl111sf_adap_state *adap_state = adap->fe_adap[fe_id].priv;
-	int ret;
-
-	deb_adv("%s()\n", __func__);
-
-	/* save a pointer to the dvb_usb_device in device state */
-	state->d = d;
-	adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1;
-	state->alt_mode = adap_state->alt_mode;
-
-	if (usb_set_interface(adap->dev->udev, 0, state->alt_mode) < 0)
-		err("set interface failed");
-
-	state->gpio_mode = MXL111SF_GPIO_MOD_MH;
-	adap_state->gpio_mode = state->gpio_mode;
-	adap_state->device_mode = MXL_TUNER_MODE;
-	adap_state->ep6_clockphase = 0;
-
-	ret = mxl1x1sf_soft_reset(state);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_init_tuner_demod(state);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_enable_usb_output(state);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl1x1sf_top_master_ctrl(state, 1);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_init_port_expander(state);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = get_chip_info(state);
-	if (mxl_fail(ret))
-		goto fail;
-
-	adap->fe_adap[fe_id].fe = dvb_attach(lg2160_attach,
-			      (MXL111SF_V8_200 == state->chip_rev) ?
-			      &hauppauge_lg2161_1040_ep6_config :
-			      &hauppauge_lg2161_1019_ep6_config,
-			      &adap->dev->i2c_adap);
-	if (adap->fe_adap[fe_id].fe) {
-		adap_state->fe_init = adap->fe_adap[fe_id].fe->ops.init;
-		adap->fe_adap[fe_id].fe->ops.init = mxl111sf_adap_fe_init;
-		adap_state->fe_sleep = adap->fe_adap[fe_id].fe->ops.sleep;
-		adap->fe_adap[fe_id].fe->ops.sleep = mxl111sf_adap_fe_sleep;
-		return 0;
-	}
-	ret = -EIO;
-fail:
-	return ret;
-}
-
-static struct mxl111sf_demod_config mxl_demod_config = {
-	.read_reg        = mxl111sf_read_reg,
-	.write_reg       = mxl111sf_write_reg,
-	.program_regs    = mxl111sf_ctrl_program_regs,
-};
-
-static int mxl111sf_attach_demod(struct dvb_usb_adapter *adap)
-{
-	struct dvb_usb_device *d = adap->dev;
-	struct mxl111sf_state *state = d->priv;
-	int fe_id = adap->num_frontends_initialized;
-	struct mxl111sf_adap_state *adap_state = adap->fe_adap[fe_id].priv;
-	int ret;
-
-	deb_adv("%s()\n", __func__);
-
-	/* save a pointer to the dvb_usb_device in device state */
-	state->d = d;
-	adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 1 : 2;
-	state->alt_mode = adap_state->alt_mode;
-
-	if (usb_set_interface(adap->dev->udev, 0, state->alt_mode) < 0)
-		err("set interface failed");
-
-	state->gpio_mode = MXL111SF_GPIO_MOD_DVBT;
-	adap_state->gpio_mode = state->gpio_mode;
-	adap_state->device_mode = MXL_SOC_MODE;
-	adap_state->ep6_clockphase = 1;
-
-	ret = mxl1x1sf_soft_reset(state);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl111sf_init_tuner_demod(state);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode);
-	if (mxl_fail(ret))
-		goto fail;
-
-	ret = mxl111sf_enable_usb_output(state);
-	if (mxl_fail(ret))
-		goto fail;
-	ret = mxl1x1sf_top_master_ctrl(state, 1);
-	if (mxl_fail(ret))
-		goto fail;
-
-	/* dont care if this fails */
-	mxl111sf_init_port_expander(state);
-
-	adap->fe_adap[fe_id].fe = dvb_attach(mxl111sf_demod_attach, state,
-			      &mxl_demod_config);
-	if (adap->fe_adap[fe_id].fe) {
-		adap_state->fe_init = adap->fe_adap[fe_id].fe->ops.init;
-		adap->fe_adap[fe_id].fe->ops.init = mxl111sf_adap_fe_init;
-		adap_state->fe_sleep = adap->fe_adap[fe_id].fe->ops.sleep;
-		adap->fe_adap[fe_id].fe->ops.sleep = mxl111sf_adap_fe_sleep;
-		return 0;
-	}
-	ret = -EIO;
-fail:
-	return ret;
-}
-
-static inline int mxl111sf_set_ant_path(struct mxl111sf_state *state,
-					int antpath)
-{
-	return mxl111sf_idac_config(state, 1, 1,
-				    (antpath == ANT_PATH_INTERNAL) ?
-				    0x3f : 0x00, 0);
-}
-
-#define DbgAntHunt(x, pwr0, pwr1, pwr2, pwr3) \
-	err("%s(%d) FINAL input set to %s rxPwr:%d|%d|%d|%d\n", \
-	    __func__, __LINE__, \
-	    (ANT_PATH_EXTERNAL == x) ? "EXTERNAL" : "INTERNAL", \
-	    pwr0, pwr1, pwr2, pwr3)
-
-#define ANT_HUNT_SLEEP 90
-#define ANT_EXT_TWEAK 0
-
-static int mxl111sf_ant_hunt(struct dvb_frontend *fe)
-{
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct dvb_usb_device *d = adap->dev;
-	struct mxl111sf_state *state = d->priv;
-
-	int antctrl = dvb_usb_mxl111sf_rfswitch;
-
-	u16 rxPwrA, rxPwr0, rxPwr1, rxPwr2;
-
-	/* FIXME: must force EXTERNAL for QAM - done elsewhere */
-	mxl111sf_set_ant_path(state, antctrl == ANT_PATH_AUTO ?
-			      ANT_PATH_EXTERNAL : antctrl);
-
-	if (antctrl == ANT_PATH_AUTO) {
-#if 0
-		msleep(ANT_HUNT_SLEEP);
-#endif
-		fe->ops.tuner_ops.get_rf_strength(fe, &rxPwrA);
-
-		mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL);
-		msleep(ANT_HUNT_SLEEP);
-		fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr0);
-
-		mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL);
-		msleep(ANT_HUNT_SLEEP);
-		fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr1);
-
-		mxl111sf_set_ant_path(state, ANT_PATH_INTERNAL);
-		msleep(ANT_HUNT_SLEEP);
-		fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr2);
-
-		if (rxPwr1+ANT_EXT_TWEAK >= rxPwr2) {
-			/* return with EXTERNAL enabled */
-			mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL);
-			DbgAntHunt(ANT_PATH_EXTERNAL, rxPwrA,
-				   rxPwr0, rxPwr1, rxPwr2);
-		} else {
-			/* return with INTERNAL enabled */
-			DbgAntHunt(ANT_PATH_INTERNAL, rxPwrA,
-				   rxPwr0, rxPwr1, rxPwr2);
-		}
-	}
-	return 0;
-}
-
-static struct mxl111sf_tuner_config mxl_tuner_config = {
-	.if_freq         = MXL_IF_6_0, /* applies to external IF output, only */
-	.invert_spectrum = 0,
-	.read_reg        = mxl111sf_read_reg,
-	.write_reg       = mxl111sf_write_reg,
-	.program_regs    = mxl111sf_ctrl_program_regs,
-	.top_master_ctrl = mxl1x1sf_top_master_ctrl,
-	.ant_hunt        = mxl111sf_ant_hunt,
-};
-
-static int mxl111sf_attach_tuner(struct dvb_usb_adapter *adap)
-{
-	struct dvb_usb_device *d = adap->dev;
-	struct mxl111sf_state *state = d->priv;
-	int fe_id = adap->num_frontends_initialized;
-
-	deb_adv("%s()\n", __func__);
-
-	if (NULL != dvb_attach(mxl111sf_tuner_attach,
-			       adap->fe_adap[fe_id].fe, state,
-			       &mxl_tuner_config))
-		return 0;
-
-	return -EIO;
-}
-
-static int mxl111sf_fe_ioctl_override(struct dvb_frontend *fe,
-				      unsigned int cmd, void *parg,
-				      unsigned int stage)
-{
-	int err = 0;
-
-	switch (stage) {
-	case DVB_FE_IOCTL_PRE:
-
-		switch (cmd) {
-		case FE_READ_SIGNAL_STRENGTH:
-			err = fe->ops.tuner_ops.get_rf_strength(fe, parg);
-			/* If no error occurs, prevent dvb-core from handling
-			 * this IOCTL, otherwise return the error */
-			if (0 == err)
-				err = 1;
-			break;
-		}
-		break;
-
-	case DVB_FE_IOCTL_POST:
-		/* no post-ioctl handling required */
-		break;
-	}
-	return err;
-};
-
-static u32 mxl111sf_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-struct i2c_algorithm mxl111sf_i2c_algo = {
-	.master_xfer   = mxl111sf_i2c_xfer,
-	.functionality = mxl111sf_i2c_func,
-#ifdef NEED_ALGO_CONTROL
-	.algo_control = dummy_algo_control,
-#endif
-};
-
-static struct dvb_usb_device_properties mxl111sf_dvbt_bulk_properties;
-static struct dvb_usb_device_properties mxl111sf_dvbt_isoc_properties;
-static struct dvb_usb_device_properties mxl111sf_atsc_bulk_properties;
-static struct dvb_usb_device_properties mxl111sf_atsc_isoc_properties;
-static struct dvb_usb_device_properties mxl111sf_atsc_mh_bulk_properties;
-static struct dvb_usb_device_properties mxl111sf_atsc_mh_isoc_properties;
-static struct dvb_usb_device_properties mxl111sf_mh_bulk_properties;
-static struct dvb_usb_device_properties mxl111sf_mh_isoc_properties;
-static struct dvb_usb_device_properties mxl111sf_mercury_spi_bulk_properties;
-static struct dvb_usb_device_properties mxl111sf_mercury_spi_isoc_properties;
-static struct dvb_usb_device_properties mxl111sf_mercury_tp_bulk_properties;
-static struct dvb_usb_device_properties mxl111sf_mercury_tp_isoc_properties;
-static struct dvb_usb_device_properties mxl111sf_mercury_mh_spi_bulk_properties;
-static struct dvb_usb_device_properties mxl111sf_mercury_mh_spi_isoc_properties;
-static struct dvb_usb_device_properties mxl111sf_mercury_mh_tp_bulk_properties;
-static struct dvb_usb_device_properties mxl111sf_mercury_mh_tp_isoc_properties;
-
-static int mxl111sf_probe(struct usb_interface *intf,
-			  const struct usb_device_id *id)
-{
-	struct dvb_usb_device *d = NULL;
-
-	deb_adv("%s()\n", __func__);
-
-	if (((dvb_usb_mxl111sf_isoc) &&
-	     (0 == dvb_usb_device_init(intf,
-				       &mxl111sf_dvbt_isoc_properties,
-				       THIS_MODULE, &d, adapter_nr) ||
-	      0 == dvb_usb_device_init(intf,
-				       &mxl111sf_atsc_isoc_properties,
-				       THIS_MODULE, &d, adapter_nr) ||
-	      0 == dvb_usb_device_init(intf,
-				       &mxl111sf_atsc_mh_isoc_properties,
-				       THIS_MODULE, &d, adapter_nr) ||
-	      0 == dvb_usb_device_init(intf,
-				       &mxl111sf_mh_isoc_properties,
-				       THIS_MODULE, &d, adapter_nr) ||
-	      ((dvb_usb_mxl111sf_spi) &&
-	       (0 == dvb_usb_device_init(intf,
-					 &mxl111sf_mercury_spi_isoc_properties,
-					 THIS_MODULE, &d, adapter_nr) ||
-		0 == dvb_usb_device_init(intf,
-					 &mxl111sf_mercury_mh_spi_isoc_properties,
-					 THIS_MODULE, &d, adapter_nr))) ||
-	      0 == dvb_usb_device_init(intf,
-				       &mxl111sf_mercury_tp_isoc_properties,
-				       THIS_MODULE, &d, adapter_nr) ||
-	      0 == dvb_usb_device_init(intf,
-				       &mxl111sf_mercury_mh_tp_isoc_properties,
-				       THIS_MODULE, &d, adapter_nr))) ||
-	    0 == dvb_usb_device_init(intf,
-				     &mxl111sf_dvbt_bulk_properties,
-				     THIS_MODULE, &d, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf,
-				     &mxl111sf_atsc_bulk_properties,
-				     THIS_MODULE, &d, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf,
-				     &mxl111sf_atsc_mh_bulk_properties,
-				     THIS_MODULE, &d, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf,
-				     &mxl111sf_mh_bulk_properties,
-				     THIS_MODULE, &d, adapter_nr) ||
-	    ((dvb_usb_mxl111sf_spi) &&
-	     (0 == dvb_usb_device_init(intf,
-				       &mxl111sf_mercury_spi_bulk_properties,
-				       THIS_MODULE, &d, adapter_nr) ||
-	      0 == dvb_usb_device_init(intf,
-				       &mxl111sf_mercury_mh_spi_bulk_properties,
-				       THIS_MODULE, &d, adapter_nr))) ||
-	    0 == dvb_usb_device_init(intf,
-				     &mxl111sf_mercury_tp_bulk_properties,
-				     THIS_MODULE, &d, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf,
-				     &mxl111sf_mercury_mh_tp_bulk_properties,
-				     THIS_MODULE, &d, adapter_nr) || 0) {
-
-		struct mxl111sf_state *state = d->priv;
-		static u8 eeprom[256];
-		struct i2c_client c;
-		int ret;
-
-		ret = get_chip_info(state);
-		if (mxl_fail(ret))
-			err("failed to get chip info during probe");
-
-		mutex_init(&state->fe_lock);
-
-		if (state->chip_rev > MXL111SF_V6)
-			mxl111sf_config_pin_mux_modes(state,
-						      PIN_MUX_TS_SPI_IN_MODE_1);
-
-		c.adapter = &d->i2c_adap;
-		c.addr = 0xa0 >> 1;
-
-		ret = tveeprom_read(&c, eeprom, sizeof(eeprom));
-		if (mxl_fail(ret))
-			return 0;
-		tveeprom_hauppauge_analog(&c, &state->tv,
-					  (0x84 == eeprom[0xa0]) ?
-					  eeprom + 0xa0 : eeprom + 0x80);
-#if 0
-		switch (state->tv.model) {
-		case 117001:
-		case 126001:
-		case 138001:
-			break;
-		default:
-			printk(KERN_WARNING "%s: warning: "
-			       "unknown hauppauge model #%d\n",
-			       __func__, state->tv.model);
-		}
-#endif
-		return 0;
-	}
-	err("Your device is not yet supported by this driver. "
-	    "See kernellabs.com for more info");
-	return -EINVAL;
-}
-
-static struct usb_device_id mxl111sf_table[] = {
-/* 0 */	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xc600) }, /* ATSC+ IR     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xc601) }, /* ATSC         */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xc602) }, /*     +        */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xc603) }, /* ATSC+        */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xc604) }, /* DVBT         */
-/* 5 */	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xc609) }, /* ATSC  IR     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60a) }, /*     + IR     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60b) }, /* ATSC+ IR     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60c) }, /* DVBT  IR     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xc653) }, /* ATSC+        */
-/*10 */	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xc65b) }, /* ATSC+ IR     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xb700) }, /* ATSC+ sw     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xb701) }, /* ATSC  sw     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xb702) }, /*     + sw     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xb703) }, /* ATSC+ sw     */
-/*15 */	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xb704) }, /* DVBT  sw     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xb753) }, /* ATSC+ sw     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xb763) }, /* ATSC+ no     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xb764) }, /* DVBT  no     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xd853) }, /* ATSC+ sw     */
-/*20 */	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xd854) }, /* DVBT  sw     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xd863) }, /* ATSC+ no     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xd864) }, /* DVBT  no     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8d3) }, /* ATSC+ sw     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8d4) }, /* DVBT  sw     */
-/*25 */	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8e3) }, /* ATSC+ no     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8e4) }, /* DVBT  no     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8ff) }, /* ATSC+        */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xc612) }, /*     +        */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xc613) }, /* ATSC+        */
-/*30 */	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xc61a) }, /*     + IR     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xc61b) }, /* ATSC+ IR     */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xb757) }, /* ATSC+DVBT sw */
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, 0xb767) }, /* ATSC+DVBT no */
-	{}		/* Terminating entry */
-};
-MODULE_DEVICE_TABLE(usb, mxl111sf_table);
-
-
-#define MXL111SF_EP4_BULK_STREAMING_CONFIG		\
-	.size_of_priv = sizeof(struct mxl111sf_adap_state), \
-	.streaming_ctrl = mxl111sf_ep4_streaming_ctrl,	\
-	.stream = {					\
-		.type = USB_BULK,			\
-		.count = 5,				\
-		.endpoint = 0x04,			\
-		.u = {					\
-			.bulk = {			\
-				.buffersize = 8192,	\
-			}				\
-		}					\
-	}
-
-/* FIXME: works for v6 but not v8 silicon */
-#define MXL111SF_EP4_ISOC_STREAMING_CONFIG		\
-	.size_of_priv = sizeof(struct mxl111sf_adap_state), \
-	.streaming_ctrl = mxl111sf_ep4_streaming_ctrl,	\
-	.stream = {					\
-		.type = USB_ISOC,			\
-		.count = 5,				\
-		.endpoint = 0x04,			\
-		.u = {					\
-			.isoc = {			\
-				.framesperurb = 96,	\
-				/* FIXME: v6 SILICON: */	\
-				.framesize = 564,	\
-				.interval = 1,		\
-			}				\
-		}					\
-	}
-
-#define MXL111SF_EP5_BULK_STREAMING_CONFIG		\
-	.size_of_priv = sizeof(struct mxl111sf_adap_state), \
-	.streaming_ctrl = mxl111sf_ep5_streaming_ctrl,	\
-	.stream = {					\
-		.type = USB_BULK,			\
-		.count = 5,				\
-		.endpoint = 0x05,			\
-		.u = {					\
-			.bulk = {			\
-				.buffersize = 8192,	\
-			}				\
-		}					\
-	}
-
-#define MXL111SF_EP5_ISOC_STREAMING_CONFIG		\
-	.size_of_priv = sizeof(struct mxl111sf_adap_state), \
-	.streaming_ctrl = mxl111sf_ep5_streaming_ctrl,	\
-	.stream = {					\
-		.type = USB_ISOC,			\
-		.count = 5,				\
-		.endpoint = 0x05,			\
-		.u = {					\
-			.isoc = {			\
-				.framesperurb = 96,	\
-				.framesize = 200,	\
-				.interval = 1,		\
-			}				\
-		}					\
-	}
-
-#define MXL111SF_EP6_BULK_STREAMING_CONFIG		\
-	.size_of_priv = sizeof(struct mxl111sf_adap_state), \
-	.streaming_ctrl = mxl111sf_ep6_streaming_ctrl,	\
-	.stream = {					\
-		.type = USB_BULK,			\
-		.count = 5,				\
-		.endpoint = 0x06,			\
-		.u = {					\
-			.bulk = {			\
-				.buffersize = 8192,	\
-			}				\
-		}					\
-	}
-
-/* FIXME */
-#define MXL111SF_EP6_ISOC_STREAMING_CONFIG		\
-	.size_of_priv = sizeof(struct mxl111sf_adap_state), \
-	.streaming_ctrl = mxl111sf_ep6_streaming_ctrl,	\
-	.stream = {					\
-		.type = USB_ISOC,			\
-		.count = 5,				\
-		.endpoint = 0x06,			\
-		.u = {					\
-			.isoc = {			\
-				.framesperurb = 24,	\
-				.framesize = 3072,	\
-				.interval = 1,		\
-			}				\
-		}					\
-	}
-
-#define MXL111SF_DEFAULT_DEVICE_PROPERTIES			\
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,			\
-	.usb_ctrl = DEVICE_SPECIFIC,				\
-	/* use usb alt setting 1 for EP4 ISOC transfer (dvb-t),	\
-				     EP6 BULK transfer (atsc/qam), \
-	   use usb alt setting 2 for EP4 BULK transfer (dvb-t),	\
-				     EP6 ISOC transfer (atsc/qam), \
-	*/							\
-	.power_ctrl       = mxl111sf_power_ctrl,		\
-	.i2c_algo         = &mxl111sf_i2c_algo,			\
-	.generic_bulk_ctrl_endpoint          = MXL_EP2_REG_WRITE, \
-	.generic_bulk_ctrl_endpoint_response = MXL_EP1_REG_READ, \
-	.size_of_priv     = sizeof(struct mxl111sf_state)
-
-static struct dvb_usb_device_properties mxl111sf_dvbt_bulk_properties = {
-	MXL111SF_DEFAULT_DEVICE_PROPERTIES,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.fe_ioctl_override = mxl111sf_fe_ioctl_override,
-		.num_frontends = 1,
-		.fe = {{
-			.frontend_attach  = mxl111sf_attach_demod,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP4_BULK_STREAMING_CONFIG,
-		} },
-		},
-	},
-	.num_device_descs = 3,
-	.devices = {
-		{   "Hauppauge 126xxx DVBT (bulk)",
-			{ NULL },
-			{ &mxl111sf_table[4], &mxl111sf_table[8],
-			  NULL },
-		},
-		{   "Hauppauge 117xxx DVBT (bulk)",
-			{ NULL },
-			{ &mxl111sf_table[15], &mxl111sf_table[18],
-			  NULL },
-		},
-		{   "Hauppauge 138xxx DVBT (bulk)",
-			{ NULL },
-			{ &mxl111sf_table[20], &mxl111sf_table[22],
-			  &mxl111sf_table[24], &mxl111sf_table[26],
-			  NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties mxl111sf_dvbt_isoc_properties = {
-	MXL111SF_DEFAULT_DEVICE_PROPERTIES,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.fe_ioctl_override = mxl111sf_fe_ioctl_override,
-		.num_frontends = 1,
-		.fe = {{
-			.frontend_attach  = mxl111sf_attach_demod,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP4_ISOC_STREAMING_CONFIG,
-		} },
-		},
-	},
-	.num_device_descs = 3,
-	.devices = {
-		{   "Hauppauge 126xxx DVBT (isoc)",
-			{ NULL },
-			{ &mxl111sf_table[4], &mxl111sf_table[8],
-			  NULL },
-		},
-		{   "Hauppauge 117xxx DVBT (isoc)",
-			{ NULL },
-			{ &mxl111sf_table[15], &mxl111sf_table[18],
-			  NULL },
-		},
-		{   "Hauppauge 138xxx DVBT (isoc)",
-			{ NULL },
-			{ &mxl111sf_table[20], &mxl111sf_table[22],
-			  &mxl111sf_table[24], &mxl111sf_table[26],
-			  NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties mxl111sf_atsc_bulk_properties = {
-	MXL111SF_DEFAULT_DEVICE_PROPERTIES,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.fe_ioctl_override = mxl111sf_fe_ioctl_override,
-		.num_frontends = 1,
-		.fe = {{
-			.frontend_attach  = mxl111sf_lgdt3305_frontend_attach,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP6_BULK_STREAMING_CONFIG,
-		}},
-		},
-	},
-	.num_device_descs = 2,
-	.devices = {
-		{   "Hauppauge 126xxx ATSC (bulk)",
-			{ NULL },
-			{ &mxl111sf_table[1], &mxl111sf_table[5],
-			  NULL },
-		},
-		{   "Hauppauge 117xxx ATSC (bulk)",
-			{ NULL },
-			{ &mxl111sf_table[12],
-			  NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties mxl111sf_atsc_isoc_properties = {
-	MXL111SF_DEFAULT_DEVICE_PROPERTIES,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.fe_ioctl_override = mxl111sf_fe_ioctl_override,
-		.num_frontends = 1,
-		.fe = {{
-			.frontend_attach  = mxl111sf_lgdt3305_frontend_attach,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP6_ISOC_STREAMING_CONFIG,
-		}},
-		},
-	},
-	.num_device_descs = 2,
-	.devices = {
-		{   "Hauppauge 126xxx ATSC (isoc)",
-			{ NULL },
-			{ &mxl111sf_table[1], &mxl111sf_table[5],
-			  NULL },
-		},
-		{   "Hauppauge 117xxx ATSC (isoc)",
-			{ NULL },
-			{ &mxl111sf_table[12],
-			  NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties mxl111sf_mh_bulk_properties = {
-	MXL111SF_DEFAULT_DEVICE_PROPERTIES,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.fe_ioctl_override = mxl111sf_fe_ioctl_override,
-		.num_frontends = 1,
-		.fe = {{
-			.caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD,
-
-			.frontend_attach  = mxl111sf_lg2160_frontend_attach,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP5_BULK_STREAMING_CONFIG,
-		}},
-		},
-	},
-	.num_device_descs = 2,
-	.devices = {
-		{   "HCW 126xxx (bulk)",
-			{ NULL },
-			{ &mxl111sf_table[2], &mxl111sf_table[6],
-			  NULL },
-		},
-		{   "HCW 117xxx (bulk)",
-			{ NULL },
-			{ &mxl111sf_table[13],
-			  NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties mxl111sf_mh_isoc_properties = {
-	MXL111SF_DEFAULT_DEVICE_PROPERTIES,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.fe_ioctl_override = mxl111sf_fe_ioctl_override,
-		.num_frontends = 1,
-		.fe = {{
-			.caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD,
-
-			.frontend_attach  = mxl111sf_lg2160_frontend_attach,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP5_ISOC_STREAMING_CONFIG,
-		}},
-		},
-	},
-	.num_device_descs = 2,
-	.devices = {
-		{   "HCW 126xxx (isoc)",
-			{ NULL },
-			{ &mxl111sf_table[2], &mxl111sf_table[6],
-			  NULL },
-		},
-		{   "HCW 117xxx (isoc)",
-			{ NULL },
-			{ &mxl111sf_table[13],
-			  NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties mxl111sf_atsc_mh_bulk_properties = {
-	MXL111SF_DEFAULT_DEVICE_PROPERTIES,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.fe_ioctl_override = mxl111sf_fe_ioctl_override,
-		.num_frontends = 3,
-		.fe = {{
-			.frontend_attach  = mxl111sf_lgdt3305_frontend_attach,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP6_BULK_STREAMING_CONFIG,
-		},
-		{
-			.frontend_attach  = mxl111sf_attach_demod,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP4_BULK_STREAMING_CONFIG,
-		},
-		{
-			.caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD,
-
-			.frontend_attach  = mxl111sf_lg2160_frontend_attach,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP5_BULK_STREAMING_CONFIG,
-		}},
-		},
-	},
-	.num_device_descs = 2,
-	.devices = {
-		{   "Hauppauge 126xxx ATSC+ (bulk)",
-			{ NULL },
-			{ &mxl111sf_table[0], &mxl111sf_table[3],
-			  &mxl111sf_table[7], &mxl111sf_table[9],
-			  &mxl111sf_table[10], NULL },
-		},
-		{   "Hauppauge 117xxx ATSC+ (bulk)",
-			{ NULL },
-			{ &mxl111sf_table[11], &mxl111sf_table[14],
-			  &mxl111sf_table[16], &mxl111sf_table[17],
-			  &mxl111sf_table[32], &mxl111sf_table[33],
-			  NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties mxl111sf_atsc_mh_isoc_properties = {
-	MXL111SF_DEFAULT_DEVICE_PROPERTIES,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.fe_ioctl_override = mxl111sf_fe_ioctl_override,
-		.num_frontends = 3,
-		.fe = {{
-			.frontend_attach  = mxl111sf_lgdt3305_frontend_attach,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP6_ISOC_STREAMING_CONFIG,
-		},
-		{
-			.frontend_attach  = mxl111sf_attach_demod,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP4_ISOC_STREAMING_CONFIG,
-		},
-		{
-			.caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD,
-
-			.frontend_attach  = mxl111sf_lg2160_frontend_attach,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP5_ISOC_STREAMING_CONFIG,
-		}},
-		},
-	},
-	.num_device_descs = 2,
-	.devices = {
-		{   "Hauppauge 126xxx ATSC+ (isoc)",
-			{ NULL },
-			{ &mxl111sf_table[0], &mxl111sf_table[3],
-			  &mxl111sf_table[7], &mxl111sf_table[9],
-			  &mxl111sf_table[10], NULL },
-		},
-		{   "Hauppauge 117xxx ATSC+ (isoc)",
-			{ NULL },
-			{ &mxl111sf_table[11], &mxl111sf_table[14],
-			  &mxl111sf_table[16], &mxl111sf_table[17],
-			  &mxl111sf_table[32], &mxl111sf_table[33],
-			  NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties mxl111sf_mercury_spi_bulk_properties = {
-	MXL111SF_DEFAULT_DEVICE_PROPERTIES,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.fe_ioctl_override = mxl111sf_fe_ioctl_override,
-		.num_frontends = 3,
-		.fe = {{
-			.frontend_attach  = mxl111sf_lgdt3305_frontend_attach,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP6_BULK_STREAMING_CONFIG,
-		},
-		{
-			.frontend_attach  = mxl111sf_attach_demod,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP4_BULK_STREAMING_CONFIG,
-		},
-		{
-			.caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD,
-
-			.frontend_attach  = mxl111sf_lg2161_frontend_attach,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP5_BULK_STREAMING_CONFIG,
-		}},
-		},
-	},
-	.num_device_descs = 2,
-	.devices = {
-		{   "Hauppauge Mercury (spi-bulk)",
-			{ NULL },
-			{ &mxl111sf_table[19], &mxl111sf_table[21],
-			  &mxl111sf_table[23], &mxl111sf_table[25],
-			  NULL },
-		},
-		{   "Hauppauge WinTV-Aero-M (spi-bulk)",
-			{ NULL },
-			{ &mxl111sf_table[29], &mxl111sf_table[31],
-			  NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties mxl111sf_mercury_spi_isoc_properties = {
-	MXL111SF_DEFAULT_DEVICE_PROPERTIES,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.fe_ioctl_override = mxl111sf_fe_ioctl_override,
-		.num_frontends = 3,
-		.fe = {{
-			.frontend_attach  = mxl111sf_lgdt3305_frontend_attach,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP6_ISOC_STREAMING_CONFIG,
-		},
-		{
-			.frontend_attach  = mxl111sf_attach_demod,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP4_ISOC_STREAMING_CONFIG,
-		},
-		{
-			.caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD,
-
-			.frontend_attach  = mxl111sf_lg2161_frontend_attach,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP5_ISOC_STREAMING_CONFIG,
-		}},
-		},
-	},
-	.num_device_descs = 2,
-	.devices = {
-		{   "Hauppauge Mercury (spi-isoc)",
-			{ NULL },
-			{ &mxl111sf_table[19], &mxl111sf_table[21],
-			  &mxl111sf_table[23], &mxl111sf_table[25],
-			  NULL },
-		},
-		{   "Hauppauge WinTV-Aero-M (spi-isoc)",
-			{ NULL },
-			{ &mxl111sf_table[29], &mxl111sf_table[31],
-			  NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties mxl111sf_mercury_tp_bulk_properties = {
-	MXL111SF_DEFAULT_DEVICE_PROPERTIES,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.fe_ioctl_override = mxl111sf_fe_ioctl_override,
-		.num_frontends = 3,
-		.fe = {{
-			.frontend_attach  = mxl111sf_lgdt3305_frontend_attach,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP6_BULK_STREAMING_CONFIG,
-		},
-		{
-			.frontend_attach  = mxl111sf_attach_demod,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP4_BULK_STREAMING_CONFIG,
-		},
-		{
-			.caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD,
-
-			.frontend_attach  = mxl111sf_lg2161_ep6_frontend_attach,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP6_BULK_STREAMING_CONFIG,
-		}},
-		},
-	},
-	.num_device_descs = 2,
-	.devices = {
-		{   "Hauppauge Mercury (tp-bulk)",
-			{ NULL },
-			{ &mxl111sf_table[19], &mxl111sf_table[21],
-			  &mxl111sf_table[23], &mxl111sf_table[25],
-			  &mxl111sf_table[27], NULL },
-		},
-		{   "Hauppauge WinTV-Aero-M",
-			{ NULL },
-			{ &mxl111sf_table[29], &mxl111sf_table[31],
-			  NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties mxl111sf_mercury_tp_isoc_properties = {
-	MXL111SF_DEFAULT_DEVICE_PROPERTIES,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.fe_ioctl_override = mxl111sf_fe_ioctl_override,
-		.num_frontends = 3,
-		.fe = {{
-			.frontend_attach  = mxl111sf_lgdt3305_frontend_attach,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP6_ISOC_STREAMING_CONFIG,
-		},
-		{
-			.frontend_attach  = mxl111sf_attach_demod,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP4_ISOC_STREAMING_CONFIG,
-		},
-		{
-			.caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD,
-
-			.frontend_attach  = mxl111sf_lg2161_ep6_frontend_attach,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP6_ISOC_STREAMING_CONFIG,
-		}},
-		},
-	},
-	.num_device_descs = 2,
-	.devices = {
-		{   "Hauppauge Mercury (tp-isoc)",
-			{ NULL },
-			{ &mxl111sf_table[19], &mxl111sf_table[21],
-			  &mxl111sf_table[23], &mxl111sf_table[25],
-			  &mxl111sf_table[27], NULL },
-		},
-		{   "Hauppauge WinTV-Aero-M (tp-isoc)",
-			{ NULL },
-			{ &mxl111sf_table[29], &mxl111sf_table[31],
-			  NULL },
-		},
-	}
-};
-
-static
-struct dvb_usb_device_properties mxl111sf_mercury_mh_tp_bulk_properties = {
-	MXL111SF_DEFAULT_DEVICE_PROPERTIES,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.fe_ioctl_override = mxl111sf_fe_ioctl_override,
-		.num_frontends = 2,
-		.fe = {{
-			.frontend_attach  = mxl111sf_attach_demod,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP4_BULK_STREAMING_CONFIG,
-		},
-		{
-			.caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD,
-
-			.frontend_attach  = mxl111sf_lg2161_ep6_frontend_attach,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP6_BULK_STREAMING_CONFIG,
-		}},
-		},
-	},
-	.num_device_descs = 1,
-	.devices = {
-		{   "Hauppauge 126xxx (tp-bulk)",
-			{ NULL },
-			{ &mxl111sf_table[28], &mxl111sf_table[30],
-			  NULL },
-		},
-	}
-};
-
-static
-struct dvb_usb_device_properties mxl111sf_mercury_mh_tp_isoc_properties = {
-	MXL111SF_DEFAULT_DEVICE_PROPERTIES,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.fe_ioctl_override = mxl111sf_fe_ioctl_override,
-		.num_frontends = 2,
-		.fe = {{
-			.frontend_attach  = mxl111sf_attach_demod,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP4_ISOC_STREAMING_CONFIG,
-		},
-		{
-			.caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD,
-
-			.frontend_attach  = mxl111sf_lg2161_ep6_frontend_attach,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP6_ISOC_STREAMING_CONFIG,
-		}},
-		},
-	},
-	.num_device_descs = 1,
-	.devices = {
-		{   "Hauppauge 126xxx (tp-isoc)",
-			{ NULL },
-			{ &mxl111sf_table[28], &mxl111sf_table[30],
-			  NULL },
-		},
-	}
-};
-
-static
-struct dvb_usb_device_properties mxl111sf_mercury_mh_spi_bulk_properties = {
-	MXL111SF_DEFAULT_DEVICE_PROPERTIES,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.fe_ioctl_override = mxl111sf_fe_ioctl_override,
-		.num_frontends = 2,
-		.fe = {{
-			.frontend_attach  = mxl111sf_attach_demod,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP4_BULK_STREAMING_CONFIG,
-		},
-		{
-			.caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD,
-
-			.frontend_attach  = mxl111sf_lg2161_frontend_attach,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP5_BULK_STREAMING_CONFIG,
-		}},
-		},
-	},
-	.num_device_descs = 1,
-	.devices = {
-		{   "Hauppauge 126xxx (spi-bulk)",
-			{ NULL },
-			{ &mxl111sf_table[28], &mxl111sf_table[30],
-			  NULL },
-		},
-	}
-};
-
-static
-struct dvb_usb_device_properties mxl111sf_mercury_mh_spi_isoc_properties = {
-	MXL111SF_DEFAULT_DEVICE_PROPERTIES,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.fe_ioctl_override = mxl111sf_fe_ioctl_override,
-		.num_frontends = 2,
-		.fe = {{
-			.frontend_attach  = mxl111sf_attach_demod,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP4_ISOC_STREAMING_CONFIG,
-		},
-		{
-			.caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD,
-
-			.frontend_attach  = mxl111sf_lg2161_frontend_attach,
-			.tuner_attach     = mxl111sf_attach_tuner,
-
-			MXL111SF_EP5_ISOC_STREAMING_CONFIG,
-		}},
-		},
-	},
-	.num_device_descs = 1,
-	.devices = {
-		{   "Hauppauge 126xxx (spi-isoc)",
-			{ NULL },
-			{ &mxl111sf_table[28], &mxl111sf_table[30],
-			  NULL },
-		},
-	}
-};
-
-static struct usb_driver mxl111sf_driver = {
-	.name		= "dvb_usb_mxl111sf",
-	.probe		= mxl111sf_probe,
-	.disconnect     = dvb_usb_device_exit,
-	.id_table	= mxl111sf_table,
-};
-
-module_usb_driver(mxl111sf_driver);
-
-MODULE_AUTHOR("Michael Krufky <mkrufky@kernellabs.com>");
-MODULE_DESCRIPTION("Driver for MaxLinear MxL111SF");
-MODULE_VERSION("1.0");
-MODULE_LICENSE("GPL");
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf.h b/drivers/media/dvb/dvb-usb/mxl111sf.h
deleted file mode 100644
index 364d89f..0000000
--- a/drivers/media/dvb/dvb-usb/mxl111sf.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * Copyright (C) 2010 Michael Krufky (mkrufky@kernellabs.com)
- *
- *   This program is free software; you can redistribute it and/or modify it
- *   under the terms of the GNU General Public License as published by the Free
- *   Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-
-#ifndef _DVB_USB_MXL111SF_H_
-#define _DVB_USB_MXL111SF_H_
-
-#ifdef DVB_USB_LOG_PREFIX
-#undef DVB_USB_LOG_PREFIX
-#endif
-#define DVB_USB_LOG_PREFIX "mxl111sf"
-#include "dvb-usb.h"
-#include <media/tveeprom.h>
-
-#define MXL_EP1_REG_READ     1
-#define MXL_EP2_REG_WRITE    2
-#define MXL_EP3_INTERRUPT    3
-#define MXL_EP4_MPEG2        4
-#define MXL_EP5_I2S          5
-#define MXL_EP6_656          6
-#define MXL_EP6_MPEG2        6
-
-#ifdef USING_ENUM_mxl111sf_current_mode
-enum mxl111sf_current_mode {
-	mxl_mode_dvbt = MXL_EP4_MPEG2,
-	mxl_mode_mh   = MXL_EP5_I2S,
-	mxl_mode_atsc = MXL_EP6_MPEG2,
-};
-#endif
-
-enum mxl111sf_gpio_port_expander {
-	mxl111sf_gpio_hw,
-	mxl111sf_PCA9534,
-};
-
-struct mxl111sf_state {
-	struct dvb_usb_device *d;
-
-	enum mxl111sf_gpio_port_expander gpio_port_expander;
-	u8 port_expander_addr;
-
-	u8 chip_id;
-	u8 chip_ver;
-#define MXL111SF_V6     1
-#define MXL111SF_V8_100 2
-#define MXL111SF_V8_200 3
-	u8 chip_rev;
-
-#ifdef USING_ENUM_mxl111sf_current_mode
-	enum mxl111sf_current_mode current_mode;
-#endif
-
-#define MXL_TUNER_MODE         0
-#define MXL_SOC_MODE           1
-#define MXL_DEV_MODE_MASK      0x01
-#if 1
-	int device_mode;
-#endif
-	/* use usb alt setting 1 for EP4 ISOC transfer (dvb-t),
-				     EP5 BULK transfer (atsc-mh),
-				     EP6 BULK transfer (atsc/qam),
-	   use usb alt setting 2 for EP4 BULK transfer (dvb-t),
-				     EP5 ISOC transfer (atsc-mh),
-				     EP6 ISOC transfer (atsc/qam),
-	 */
-	int alt_mode;
-	int gpio_mode;
-	struct tveeprom tv;
-
-	struct mutex fe_lock;
-};
-
-struct mxl111sf_adap_state {
-	int alt_mode;
-	int gpio_mode;
-	int device_mode;
-	int ep6_clockphase;
-	int (*fe_init)(struct dvb_frontend *);
-	int (*fe_sleep)(struct dvb_frontend *);
-};
-
-int mxl111sf_read_reg(struct mxl111sf_state *state, u8 addr, u8 *data);
-int mxl111sf_write_reg(struct mxl111sf_state *state, u8 addr, u8 data);
-
-struct mxl111sf_reg_ctrl_info {
-	u8 addr;
-	u8 mask;
-	u8 data;
-};
-
-int mxl111sf_write_reg_mask(struct mxl111sf_state *state,
-			    u8 addr, u8 mask, u8 data);
-int mxl111sf_ctrl_program_regs(struct mxl111sf_state *state,
-			       struct mxl111sf_reg_ctrl_info *ctrl_reg_info);
-
-/* needed for hardware i2c functions in mxl111sf-i2c.c:
- * mxl111sf_i2c_send_data / mxl111sf_i2c_get_data */
-int mxl111sf_ctrl_msg(struct dvb_usb_device *d,
-		      u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen);
-
-#define mxl_printk(kern, fmt, arg...) \
-	printk(kern "%s: " fmt "\n", __func__, ##arg)
-
-#define mxl_info(fmt, arg...) \
-	mxl_printk(KERN_INFO, fmt, ##arg)
-
-extern int dvb_usb_mxl111sf_debug;
-#define mxl_debug(fmt, arg...) \
-	if (dvb_usb_mxl111sf_debug) \
-		mxl_printk(KERN_DEBUG, fmt, ##arg)
-
-#define MXL_I2C_DBG 0x04
-#define MXL_ADV_DBG 0x10
-#define mxl_debug_adv(fmt, arg...) \
-	if (dvb_usb_mxl111sf_debug & MXL_ADV_DBG) \
-		mxl_printk(KERN_DEBUG, fmt, ##arg)
-
-#define mxl_i2c(fmt, arg...) \
-	if (dvb_usb_mxl111sf_debug & MXL_I2C_DBG) \
-		mxl_printk(KERN_DEBUG, fmt, ##arg)
-
-#define mxl_i2c_adv(fmt, arg...) \
-	if ((dvb_usb_mxl111sf_debug & (MXL_I2C_DBG | MXL_ADV_DBG)) == \
-		(MXL_I2C_DBG | MXL_ADV_DBG)) \
-			mxl_printk(KERN_DEBUG, fmt, ##arg)
-
-/* The following allows the mxl_fail() macro defined below to work
- * in externel modules, such as mxl111sf-tuner.ko, even though
- * dvb_usb_mxl111sf_debug is not defined within those modules */
-#if (defined(__MXL111SF_TUNER_H__)) || (defined(__MXL111SF_DEMOD_H__))
-#define MXL_ADV_DEBUG_ENABLED MXL_ADV_DBG
-#else
-#define MXL_ADV_DEBUG_ENABLED dvb_usb_mxl111sf_debug
-#endif
-
-#define mxl_fail(ret)							\
-({									\
-	int __ret;							\
-	__ret = (ret < 0);						\
-	if ((__ret) && (MXL_ADV_DEBUG_ENABLED & MXL_ADV_DBG))		\
-		mxl_printk(KERN_ERR, "error %d on line %d",		\
-			   ret, __LINE__);				\
-	__ret;								\
-})
-
-#endif /* _DVB_USB_MXL111SF_H_ */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/dvb-usb/nova-t-usb2.c b/drivers/media/dvb/dvb-usb/nova-t-usb2.c
deleted file mode 100644
index 6c55384..0000000
--- a/drivers/media/dvb/dvb-usb/nova-t-usb2.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/* DVB USB framework compliant Linux driver for the Hauppauge WinTV-NOVA-T usb2
- * DVB-T receiver.
- *
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "dibusb.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=rc,2=eeprom (|-able))." DVB_USB_DEBUG_STATUS);
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-#define deb_rc(args...) dprintk(debug,0x01,args)
-#define deb_ee(args...) dprintk(debug,0x02,args)
-
-/* Hauppauge NOVA-T USB2 keys */
-static struct rc_map_table rc_map_haupp_table[] = {
-	{ 0x1e00, KEY_0 },
-	{ 0x1e01, KEY_1 },
-	{ 0x1e02, KEY_2 },
-	{ 0x1e03, KEY_3 },
-	{ 0x1e04, KEY_4 },
-	{ 0x1e05, KEY_5 },
-	{ 0x1e06, KEY_6 },
-	{ 0x1e07, KEY_7 },
-	{ 0x1e08, KEY_8 },
-	{ 0x1e09, KEY_9 },
-	{ 0x1e0a, KEY_KPASTERISK },
-	{ 0x1e0b, KEY_RED },
-	{ 0x1e0c, KEY_RADIO },
-	{ 0x1e0d, KEY_MENU },
-	{ 0x1e0e, KEY_GRAVE }, /* # */
-	{ 0x1e0f, KEY_MUTE },
-	{ 0x1e10, KEY_VOLUMEUP },
-	{ 0x1e11, KEY_VOLUMEDOWN },
-	{ 0x1e12, KEY_CHANNEL },
-	{ 0x1e14, KEY_UP },
-	{ 0x1e15, KEY_DOWN },
-	{ 0x1e16, KEY_LEFT },
-	{ 0x1e17, KEY_RIGHT },
-	{ 0x1e18, KEY_VIDEO },
-	{ 0x1e19, KEY_AUDIO },
-	{ 0x1e1a, KEY_IMAGES },
-	{ 0x1e1b, KEY_EPG },
-	{ 0x1e1c, KEY_TV },
-	{ 0x1e1e, KEY_NEXT },
-	{ 0x1e1f, KEY_BACK },
-	{ 0x1e20, KEY_CHANNELUP },
-	{ 0x1e21, KEY_CHANNELDOWN },
-	{ 0x1e24, KEY_LAST }, /* Skip backwards */
-	{ 0x1e25, KEY_OK },
-	{ 0x1e29, KEY_BLUE},
-	{ 0x1e2e, KEY_GREEN },
-	{ 0x1e30, KEY_PAUSE },
-	{ 0x1e32, KEY_REWIND },
-	{ 0x1e34, KEY_FASTFORWARD },
-	{ 0x1e35, KEY_PLAY },
-	{ 0x1e36, KEY_STOP },
-	{ 0x1e37, KEY_RECORD },
-	{ 0x1e38, KEY_YELLOW },
-	{ 0x1e3b, KEY_GOTO },
-	{ 0x1e3d, KEY_POWER },
-};
-
-/* Firmware bug? sometimes, when a new key is pressed, the previous pressed key
- * is delivered. No workaround yet, maybe a new firmware.
- */
-static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
-{
-	u8 key[5],cmd[2] = { DIBUSB_REQ_POLL_REMOTE, 0x35 }, data,toggle,custom;
-	u16 raw;
-	int i;
-	struct dibusb_device_state *st = d->priv;
-
-	dvb_usb_generic_rw(d,cmd,2,key,5,0);
-
-	*state = REMOTE_NO_KEY_PRESSED;
-	switch (key[0]) {
-		case DIBUSB_RC_HAUPPAUGE_KEY_PRESSED:
-			raw = ((key[1] << 8) | key[2]) >> 3;
-			toggle = !!(raw & 0x800);
-			data = raw & 0x3f;
-			custom = (raw >> 6) & 0x1f;
-
-			deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to c: %02x d: %02x toggle: %d\n",key[1],key[2],key[3],custom,data,toggle);
-
-			for (i = 0; i < ARRAY_SIZE(rc_map_haupp_table); i++) {
-				if (rc5_data(&rc_map_haupp_table[i]) == data &&
-					rc5_custom(&rc_map_haupp_table[i]) == custom) {
-
-					deb_rc("c: %x, d: %x\n", rc5_data(&rc_map_haupp_table[i]),
-								 rc5_custom(&rc_map_haupp_table[i]));
-
-					*event = rc_map_haupp_table[i].keycode;
-					*state = REMOTE_KEY_PRESSED;
-					if (st->old_toggle == toggle) {
-						if (st->last_repeat_count++ < 2)
-							*state = REMOTE_NO_KEY_PRESSED;
-					} else {
-						st->last_repeat_count = 0;
-						st->old_toggle = toggle;
-					}
-					break;
-				}
-			}
-
-			break;
-		case DIBUSB_RC_HAUPPAUGE_KEY_EMPTY:
-		default:
-			break;
-	}
-
-	return 0;
-}
-
-static int nova_t_read_mac_address (struct dvb_usb_device *d, u8 mac[6])
-{
-	int i;
-	u8 b;
-
-	mac[0] = 0x00;
-	mac[1] = 0x0d;
-	mac[2] = 0xfe;
-
-	/* this is a complete guess, but works for my box */
-	for (i = 136; i < 139; i++) {
-		dibusb_read_eeprom_byte(d,i, &b);
-
-		mac[5 - (i - 136)] = b;
-	}
-
-	return 0;
-}
-
-/* USB Driver stuff */
-static struct dvb_usb_device_properties nova_t_properties;
-
-static int nova_t_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	return dvb_usb_device_init(intf, &nova_t_properties,
-				   THIS_MODULE, NULL, adapter_nr);
-}
-
-/* do not change the order of the ID table */
-static struct usb_device_id nova_t_table [] = {
-/* 00 */	{ USB_DEVICE(USB_VID_HAUPPAUGE,     USB_PID_WINTV_NOVA_T_USB2_COLD) },
-/* 01 */	{ USB_DEVICE(USB_VID_HAUPPAUGE,     USB_PID_WINTV_NOVA_T_USB2_WARM) },
-			{ }		/* Terminating entry */
-};
-MODULE_DEVICE_TABLE(usb, nova_t_table);
-
-static struct dvb_usb_device_properties nova_t_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = CYPRESS_FX2,
-	.firmware = "dvb-usb-nova-t-usb2-02.fw",
-
-	.num_adapters     = 1,
-	.adapter          = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-			.pid_filter_count = 32,
-
-			.streaming_ctrl   = dibusb2_0_streaming_ctrl,
-			.pid_filter       = dibusb_pid_filter,
-			.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
-			.frontend_attach  = dibusb_dib3000mc_frontend_attach,
-			.tuner_attach     = dibusb_dib3000mc_tuner_attach,
-
-			/* parameter for the MPEG2-data transfer */
-					.stream = {
-						.type = USB_BULK,
-				.count = 7,
-				.endpoint = 0x06,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			},
-		}},
-			.size_of_priv     = sizeof(struct dibusb_state),
-		}
-	},
-	.size_of_priv     = sizeof(struct dibusb_device_state),
-
-	.power_ctrl       = dibusb2_0_power_ctrl,
-	.read_mac_address = nova_t_read_mac_address,
-
-	.rc.legacy = {
-		.rc_interval      = 100,
-		.rc_map_table     = rc_map_haupp_table,
-		.rc_map_size      = ARRAY_SIZE(rc_map_haupp_table),
-		.rc_query         = nova_t_rc_query,
-	},
-
-	.i2c_algo         = &dibusb_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 1,
-	.devices = {
-		{   "Hauppauge WinTV-NOVA-T usb2",
-			{ &nova_t_table[0], NULL },
-			{ &nova_t_table[1], NULL },
-		},
-		{ NULL },
-	}
-};
-
-static struct usb_driver nova_t_driver = {
-	.name		= "dvb_usb_nova_t_usb2",
-	.probe		= nova_t_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table	= nova_t_table,
-};
-
-module_usb_driver(nova_t_driver);
-
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
-MODULE_DESCRIPTION("Hauppauge WinTV-NOVA-T usb2");
-MODULE_VERSION("1.0");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/opera1.c b/drivers/media/dvb/dvb-usb/opera1.c
deleted file mode 100644
index c8a9504..0000000
--- a/drivers/media/dvb/dvb-usb/opera1.c
+++ /dev/null
@@ -1,583 +0,0 @@
-/* DVB USB framework compliant Linux driver for the Opera1 DVB-S Card
-*
-* Copyright (C) 2006 Mario Hlawitschka (dh1pa@amsat.org)
-* Copyright (C) 2006 Marco Gittler (g.marco@freenet.de)
-*
-*	This program is free software; you can redistribute it and/or modify it
-*	under the terms of the GNU General Public License as published by the Free
-*	Software Foundation, version 2.
-*
-* see Documentation/dvb/README.dvb-usb for more information
-*/
-
-#define DVB_USB_LOG_PREFIX "opera"
-
-#include "dvb-usb.h"
-#include "stv0299.h"
-
-#define OPERA_READ_MSG 0
-#define OPERA_WRITE_MSG 1
-#define OPERA_I2C_TUNER 0xd1
-
-#define READ_FX2_REG_REQ  0xba
-#define READ_MAC_ADDR 0x08
-#define OPERA_WRITE_FX2 0xbb
-#define OPERA_TUNER_REQ 0xb1
-#define REG_1F_SYMBOLRATE_BYTE0 0x1f
-#define REG_20_SYMBOLRATE_BYTE1 0x20
-#define REG_21_SYMBOLRATE_BYTE2 0x21
-
-#define ADDR_B600_VOLTAGE_13V (0x02)
-#define ADDR_B601_VOLTAGE_18V (0x03)
-#define ADDR_B1A6_STREAM_CTRL (0x04)
-#define ADDR_B880_READ_REMOTE (0x05)
-
-struct opera1_state {
-	u32 last_key_pressed;
-};
-struct rc_map_opera_table {
-	u32 keycode;
-	u32 event;
-};
-
-static int dvb_usb_opera1_debug;
-module_param_named(debug, dvb_usb_opera1_debug, int, 0644);
-MODULE_PARM_DESC(debug,
-		 "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))."
-		 DVB_USB_DEBUG_STATUS);
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-
-static int opera1_xilinx_rw(struct usb_device *dev, u8 request, u16 value,
-			    u8 * data, u16 len, int flags)
-{
-	int ret;
-	u8 tmp;
-	u8 *buf;
-	unsigned int pipe = (flags == OPERA_READ_MSG) ?
-		usb_rcvctrlpipe(dev,0) : usb_sndctrlpipe(dev, 0);
-	u8 request_type = (flags == OPERA_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT;
-
-	buf = kmalloc(len, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	if (flags == OPERA_WRITE_MSG)
-		memcpy(buf, data, len);
-	ret = usb_control_msg(dev, pipe, request,
-			request_type | USB_TYPE_VENDOR, value, 0x0,
-			buf, len, 2000);
-
-	if (request == OPERA_TUNER_REQ) {
-		tmp = buf[0];
-		if (usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-			    OPERA_TUNER_REQ, USB_DIR_IN | USB_TYPE_VENDOR,
-			    0x01, 0x0, buf, 1, 2000) < 1 || buf[0] != 0x08) {
-			ret = 0;
-			goto out;
-		}
-		buf[0] = tmp;
-	}
-	if (flags == OPERA_READ_MSG)
-		memcpy(data, buf, len);
-out:
-	kfree(buf);
-	return ret;
-}
-
-/* I2C */
-
-static int opera1_usb_i2c_msgxfer(struct dvb_usb_device *dev, u16 addr,
-				  u8 * buf, u16 len)
-{
-	int ret = 0;
-	u8 request;
-	u16 value;
-
-	if (!dev) {
-		info("no usb_device");
-		return -EINVAL;
-	}
-	if (mutex_lock_interruptible(&dev->usb_mutex) < 0)
-		return -EAGAIN;
-
-	switch (addr>>1){
-		case ADDR_B600_VOLTAGE_13V:
-			request=0xb6;
-			value=0x00;
-			break;
-		case ADDR_B601_VOLTAGE_18V:
-			request=0xb6;
-			value=0x01;
-			break;
-		case ADDR_B1A6_STREAM_CTRL:
-			request=0xb1;
-			value=0xa6;
-			break;
-		case ADDR_B880_READ_REMOTE:
-			request=0xb8;
-			value=0x80;
-			break;
-		default:
-			request=0xb1;
-			value=addr;
-	}
-	ret = opera1_xilinx_rw(dev->udev, request,
-		value, buf, len,
-		addr&0x01?OPERA_READ_MSG:OPERA_WRITE_MSG);
-
-	mutex_unlock(&dev->usb_mutex);
-	return ret;
-}
-
-static int opera1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
-			   int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	int i = 0, tmp = 0;
-
-	if (!d)
-		return -ENODEV;
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	for (i = 0; i < num; i++) {
-		if ((tmp = opera1_usb_i2c_msgxfer(d,
-					(msg[i].addr<<1)|(msg[i].flags&I2C_M_RD?0x01:0),
-					msg[i].buf,
-					msg[i].len
-					)) != msg[i].len) {
-			break;
-		}
-		if (dvb_usb_opera1_debug & 0x10)
-			info("sending i2c mesage %d %d", tmp, msg[i].len);
-	}
-	mutex_unlock(&d->i2c_mutex);
-	return num;
-}
-
-static u32 opera1_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm opera1_i2c_algo = {
-	.master_xfer = opera1_i2c_xfer,
-	.functionality = opera1_i2c_func,
-};
-
-static int opera1_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-{
-	static u8 command_13v[1]={0x00};
-	static u8 command_18v[1]={0x01};
-	struct i2c_msg msg[] = {
-		{.addr = ADDR_B600_VOLTAGE_13V,.flags = 0,.buf = command_13v,.len = 1},
-	};
-	struct dvb_usb_adapter *udev_adap =
-	    (struct dvb_usb_adapter *)(fe->dvb->priv);
-	if (voltage == SEC_VOLTAGE_18) {
-		msg[0].addr = ADDR_B601_VOLTAGE_18V;
-		msg[0].buf = command_18v;
-	}
-	i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1);
-	return 0;
-}
-
-static int opera1_stv0299_set_symbol_rate(struct dvb_frontend *fe, u32 srate,
-					  u32 ratio)
-{
-	stv0299_writereg(fe, 0x13, 0x98);
-	stv0299_writereg(fe, 0x14, 0x95);
-	stv0299_writereg(fe, REG_1F_SYMBOLRATE_BYTE0, (ratio >> 16) & 0xff);
-	stv0299_writereg(fe, REG_20_SYMBOLRATE_BYTE1, (ratio >> 8) & 0xff);
-	stv0299_writereg(fe, REG_21_SYMBOLRATE_BYTE2, (ratio) & 0xf0);
-	return 0;
-
-}
-static u8 opera1_inittab[] = {
-	0x00, 0xa1,
-	0x01, 0x15,
-	0x02, 0x30,
-	0x03, 0x00,
-	0x04, 0x7d,
-	0x05, 0x05,
-	0x06, 0x02,
-	0x07, 0x00,
-	0x0b, 0x00,
-	0x0c, 0x01,
-	0x0d, 0x81,
-	0x0e, 0x44,
-	0x0f, 0x19,
-	0x10, 0x3f,
-	0x11, 0x84,
-	0x12, 0xda,
-	0x13, 0x98,
-	0x14, 0x95,
-	0x15, 0xc9,
-	0x16, 0xeb,
-	0x17, 0x00,
-	0x18, 0x19,
-	0x19, 0x8b,
-	0x1a, 0x00,
-	0x1b, 0x82,
-	0x1c, 0x7f,
-	0x1d, 0x00,
-	0x1e, 0x00,
-	REG_1F_SYMBOLRATE_BYTE0, 0x06,
-	REG_20_SYMBOLRATE_BYTE1, 0x50,
-	REG_21_SYMBOLRATE_BYTE2, 0x10,
-	0x22, 0x00,
-	0x23, 0x00,
-	0x24, 0x37,
-	0x25, 0xbc,
-	0x26, 0x00,
-	0x27, 0x00,
-	0x28, 0x00,
-	0x29, 0x1e,
-	0x2a, 0x14,
-	0x2b, 0x1f,
-	0x2c, 0x09,
-	0x2d, 0x0a,
-	0x2e, 0x00,
-	0x2f, 0x00,
-	0x30, 0x00,
-	0x31, 0x1f,
-	0x32, 0x19,
-	0x33, 0xfc,
-	0x34, 0x13,
-	0xff, 0xff,
-};
-
-static struct stv0299_config opera1_stv0299_config = {
-	.demod_address = 0xd0>>1,
-	.min_delay_ms = 100,
-	.mclk = 88000000UL,
-	.invert = 1,
-	.skip_reinit = 0,
-	.lock_output = STV0299_LOCKOUTPUT_0,
-	.volt13_op0_op1 = STV0299_VOLT13_OP0,
-	.inittab = opera1_inittab,
-	.set_symbol_rate = opera1_stv0299_set_symbol_rate,
-};
-
-static int opera1_frontend_attach(struct dvb_usb_adapter *d)
-{
-	d->fe_adap[0].fe = dvb_attach(stv0299_attach, &opera1_stv0299_config,
-				      &d->dev->i2c_adap);
-	if ((d->fe_adap[0].fe) != NULL) {
-		d->fe_adap[0].fe->ops.set_voltage = opera1_set_voltage;
-		return 0;
-	}
-	info("not attached stv0299");
-	return -EIO;
-}
-
-static int opera1_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	dvb_attach(
-		dvb_pll_attach, adap->fe_adap[0].fe, 0xc0>>1,
-		&adap->dev->i2c_adap, DVB_PLL_OPERA1
-	);
-	return 0;
-}
-
-static int opera1_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	u8 val = onoff ? 0x01 : 0x00;
-
-	if (dvb_usb_opera1_debug)
-		info("power %s", onoff ? "on" : "off");
-	return opera1_xilinx_rw(d->udev, 0xb7, val,
-				&val, 1, OPERA_WRITE_MSG);
-}
-
-static int opera1_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	static u8 buf_start[2] = { 0xff, 0x03 };
-	static u8 buf_stop[2] = { 0xff, 0x00 };
-	struct i2c_msg start_tuner[] = {
-		{.addr = ADDR_B1A6_STREAM_CTRL,.buf = onoff ? buf_start : buf_stop,.len = 2},
-	};
-	if (dvb_usb_opera1_debug)
-		info("streaming %s", onoff ? "on" : "off");
-	i2c_transfer(&adap->dev->i2c_adap, start_tuner, 1);
-	return 0;
-}
-
-static int opera1_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
-			     int onoff)
-{
-	u8 b_pid[3];
-	struct i2c_msg msg[] = {
-		{.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3},
-	};
-	if (dvb_usb_opera1_debug)
-		info("pidfilter index: %d pid: %d %s", index, pid,
-			onoff ? "on" : "off");
-	b_pid[0] = (2 * index) + 4;
-	b_pid[1] = onoff ? (pid & 0xff) : (0x00);
-	b_pid[2] = onoff ? ((pid >> 8) & 0xff) : (0x00);
-	i2c_transfer(&adap->dev->i2c_adap, msg, 1);
-	return 0;
-}
-
-static int opera1_pid_filter_control(struct dvb_usb_adapter *adap, int onoff)
-{
-	int u = 0x04;
-	u8 b_pid[3];
-	struct i2c_msg msg[] = {
-		{.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3},
-	};
-	if (dvb_usb_opera1_debug)
-		info("%s hw-pidfilter", onoff ? "enable" : "disable");
-	for (; u < 0x7e; u += 2) {
-		b_pid[0] = u;
-		b_pid[1] = 0;
-		b_pid[2] = 0x80;
-		i2c_transfer(&adap->dev->i2c_adap, msg, 1);
-	}
-	return 0;
-}
-
-static struct rc_map_table rc_map_opera1_table[] = {
-	{0x5fa0, KEY_1},
-	{0x51af, KEY_2},
-	{0x5da2, KEY_3},
-	{0x41be, KEY_4},
-	{0x0bf5, KEY_5},
-	{0x43bd, KEY_6},
-	{0x47b8, KEY_7},
-	{0x49b6, KEY_8},
-	{0x05fa, KEY_9},
-	{0x45ba, KEY_0},
-	{0x09f6, KEY_CHANNELUP},	/*chanup */
-	{0x1be5, KEY_CHANNELDOWN},	/*chandown */
-	{0x5da3, KEY_VOLUMEDOWN},	/*voldown */
-	{0x5fa1, KEY_VOLUMEUP},		/*volup */
-	{0x07f8, KEY_SPACE},		/*tab */
-	{0x1fe1, KEY_OK},		/*play ok */
-	{0x1be4, KEY_ZOOM},		/*zoom */
-	{0x59a6, KEY_MUTE},		/*mute */
-	{0x5ba5, KEY_RADIO},		/*tv/f */
-	{0x19e7, KEY_RECORD},		/*rec */
-	{0x01fe, KEY_STOP},		/*Stop */
-	{0x03fd, KEY_PAUSE},		/*pause */
-	{0x03fc, KEY_SCREEN},		/*<- -> */
-	{0x07f9, KEY_CAMERA},		/*capture */
-	{0x47b9, KEY_ESC},		/*exit */
-	{0x43bc, KEY_POWER2},		/*power */
-};
-
-static int opera1_rc_query(struct dvb_usb_device *dev, u32 * event, int *state)
-{
-	struct opera1_state *opst = dev->priv;
-	u8 rcbuffer[32];
-	const u16 startmarker1 = 0x10ed;
-	const u16 startmarker2 = 0x11ec;
-	struct i2c_msg read_remote[] = {
-		{.addr = ADDR_B880_READ_REMOTE,.buf = rcbuffer,.flags = I2C_M_RD,.len = 32},
-	};
-	int i = 0;
-	u32 send_key = 0;
-
-	if (i2c_transfer(&dev->i2c_adap, read_remote, 1) == 1) {
-		for (i = 0; i < 32; i++) {
-			if (rcbuffer[i])
-				send_key |= 1;
-			if (i < 31)
-				send_key = send_key << 1;
-		}
-		if (send_key & 0x8000)
-			send_key = (send_key << 1) | (send_key >> 15 & 0x01);
-
-		if (send_key == 0xffff && opst->last_key_pressed != 0) {
-			*state = REMOTE_KEY_REPEAT;
-			*event = opst->last_key_pressed;
-			return 0;
-		}
-		for (; send_key != 0;) {
-			if (send_key >> 16 == startmarker2) {
-				break;
-			} else if (send_key >> 16 == startmarker1) {
-				send_key =
-					(send_key & 0xfffeffff) | (startmarker1 << 16);
-				break;
-			} else
-				send_key >>= 1;
-		}
-
-		if (send_key == 0)
-			return 0;
-
-		send_key = (send_key & 0xffff) | 0x0100;
-
-		for (i = 0; i < ARRAY_SIZE(rc_map_opera1_table); i++) {
-			if (rc5_scan(&rc_map_opera1_table[i]) == (send_key & 0xffff)) {
-				*state = REMOTE_KEY_PRESSED;
-				*event = rc_map_opera1_table[i].keycode;
-				opst->last_key_pressed =
-					rc_map_opera1_table[i].keycode;
-				break;
-			}
-			opst->last_key_pressed = 0;
-		}
-	} else
-		*state = REMOTE_NO_KEY_PRESSED;
-	return 0;
-}
-
-static struct usb_device_id opera1_table[] = {
-	{USB_DEVICE(USB_VID_CYPRESS, USB_PID_OPERA1_COLD)},
-	{USB_DEVICE(USB_VID_OPERA1, USB_PID_OPERA1_WARM)},
-	{}
-};
-
-MODULE_DEVICE_TABLE(usb, opera1_table);
-
-static int opera1_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
-{
-	u8 command[] = { READ_MAC_ADDR };
-	opera1_xilinx_rw(d->udev, 0xb1, 0xa0, command, 1, OPERA_WRITE_MSG);
-	opera1_xilinx_rw(d->udev, 0xb1, 0xa1, mac, 6, OPERA_READ_MSG);
-	return 0;
-}
-static int opera1_xilinx_load_firmware(struct usb_device *dev,
-				       const char *filename)
-{
-	const struct firmware *fw = NULL;
-	u8 *b, *p;
-	int ret = 0, i,fpgasize=40;
-	u8 testval;
-	info("start downloading fpga firmware %s",filename);
-
-	if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) {
-		err("did not find the firmware file. (%s) "
-			"Please see linux/Documentation/dvb/ for more details on firmware-problems.",
-			filename);
-		return ret;
-	} else {
-		p = kmalloc(fw->size, GFP_KERNEL);
-		opera1_xilinx_rw(dev, 0xbc, 0x00, &testval, 1, OPERA_READ_MSG);
-		if (p != NULL && testval != 0x67) {
-
-			u8 reset = 0, fpga_command = 0;
-			memcpy(p, fw->data, fw->size);
-			/* clear fpga ? */
-			opera1_xilinx_rw(dev, 0xbc, 0xaa, &fpga_command, 1,
-					 OPERA_WRITE_MSG);
-			for (i = 0; i < fw->size;) {
-				if ( (fw->size - i) <fpgasize){
-				    fpgasize=fw->size-i;
-				}
-				b = (u8 *) p + i;
-				if (opera1_xilinx_rw
-					(dev, OPERA_WRITE_FX2, 0x0, b , fpgasize,
-						OPERA_WRITE_MSG) != fpgasize
-					) {
-					err("error while transferring firmware");
-					ret = -EINVAL;
-					break;
-				}
-				i = i + fpgasize;
-			}
-			/* restart the CPU */
-			if (ret || opera1_xilinx_rw
-					(dev, 0xa0, 0xe600, &reset, 1,
-					OPERA_WRITE_MSG) != 1) {
-				err("could not restart the USB controller CPU.");
-				ret = -EINVAL;
-			}
-		}
-	}
-	kfree(p);
-	release_firmware(fw);
-	return ret;
-}
-
-static struct dvb_usb_device_properties opera1_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-	.usb_ctrl = CYPRESS_FX2,
-	.firmware = "dvb-usb-opera-01.fw",
-	.size_of_priv = sizeof(struct opera1_state),
-
-	.power_ctrl = opera1_power_ctrl,
-	.i2c_algo = &opera1_i2c_algo,
-
-	.rc.legacy = {
-		.rc_map_table = rc_map_opera1_table,
-		.rc_map_size = ARRAY_SIZE(rc_map_opera1_table),
-		.rc_interval = 200,
-		.rc_query = opera1_rc_query,
-	},
-	.read_mac_address = opera1_read_mac_address,
-	.generic_bulk_ctrl_endpoint = 0x00,
-	/* parameter for the MPEG2-data transfer */
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.frontend_attach = opera1_frontend_attach,
-			.streaming_ctrl = opera1_streaming_ctrl,
-			.tuner_attach = opera1_tuner_attach,
-			.caps =
-				DVB_USB_ADAP_HAS_PID_FILTER |
-				DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-			.pid_filter = opera1_pid_filter,
-			.pid_filter_ctrl = opera1_pid_filter_control,
-			.pid_filter_count = 252,
-			.stream = {
-				.type = USB_BULK,
-				.count = 10,
-				.endpoint = 0x82,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			},
-		}},
-		}
-	},
-	.num_device_descs = 1,
-	.devices = {
-		{"Opera1 DVB-S USB2.0",
-			{&opera1_table[0], NULL},
-			{&opera1_table[1], NULL},
-		},
-	}
-};
-
-static int opera1_probe(struct usb_interface *intf,
-			const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev(intf);
-
-	if (udev->descriptor.idProduct == USB_PID_OPERA1_WARM &&
-		udev->descriptor.idVendor == USB_VID_OPERA1 &&
-		opera1_xilinx_load_firmware(udev, "dvb-usb-opera1-fpga-01.fw") != 0
-	    ) {
-		return -EINVAL;
-	}
-
-	if (0 != dvb_usb_device_init(intf, &opera1_properties,
-				     THIS_MODULE, NULL, adapter_nr))
-		return -EINVAL;
-	return 0;
-}
-
-static struct usb_driver opera1_driver = {
-	.name = "opera1",
-	.probe = opera1_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table = opera1_table,
-};
-
-module_usb_driver(opera1_driver);
-
-MODULE_AUTHOR("Mario Hlawitschka (c) dh1pa@amsat.org");
-MODULE_AUTHOR("Marco Gittler (c) g.marco@freenet.de");
-MODULE_DESCRIPTION("Driver for Opera1 DVB-S device");
-MODULE_VERSION("0.1");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/pctv452e.c b/drivers/media/dvb/dvb-usb/pctv452e.c
deleted file mode 100644
index f526eb0..0000000
--- a/drivers/media/dvb/dvb-usb/pctv452e.c
+++ /dev/null
@@ -1,1064 +0,0 @@
-/*
- * PCTV 452e DVB driver
- *
- * Copyright (c) 2006-2008 Dominik Kuhlen <dkuhlen@gmx.net>
- *
- * TT connect S2-3650-CI Common Interface support, MAC readout
- * Copyright (C) 2008 Michael H. Schimek <mschimek@gmx.at>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-/* dvb usb framework */
-#define DVB_USB_LOG_PREFIX "pctv452e"
-#include "dvb-usb.h"
-
-/* Demodulator */
-#include "stb0899_drv.h"
-#include "stb0899_reg.h"
-#include "stb0899_cfg.h"
-/* Tuner */
-#include "stb6100.h"
-#include "stb6100_cfg.h"
-/* FE Power */
-#include "lnbp22.h"
-
-#include "dvb_ca_en50221.h"
-#include "ttpci-eeprom.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-#define ISOC_INTERFACE_ALTERNATIVE 3
-
-#define SYNC_BYTE_OUT 0xaa
-#define SYNC_BYTE_IN  0x55
-
-/* guessed: (copied from ttusb-budget) */
-#define PCTV_CMD_RESET 0x15
-/* command to poll IR receiver */
-#define PCTV_CMD_IR    0x1b
-/* command to send I2C  */
-#define PCTV_CMD_I2C   0x31
-
-#define I2C_ADDR_STB0899 (0xd0 >> 1)
-#define I2C_ADDR_STB6100 (0xc0 >> 1)
-#define I2C_ADDR_LNBP22  (0x10 >> 1)
-#define I2C_ADDR_24C16   (0xa0 >> 1)
-#define I2C_ADDR_24C64   (0xa2 >> 1)
-
-
-/* pctv452e sends us this amount of data for each issued usb-command */
-#define PCTV_ANSWER_LEN 64
-/* Wait up to 1000ms for device  */
-#define PCTV_TIMEOUT 1000
-
-
-#define PCTV_LED_GPIO   STB0899_GPIO01
-#define PCTV_LED_GREEN  0x82
-#define PCTV_LED_ORANGE 0x02
-
-#define ci_dbg(format, arg...)				\
-do {							\
-	if (0)						\
-		printk(KERN_DEBUG DVB_USB_LOG_PREFIX	\
-			": " format "\n" , ## arg);	\
-} while (0)
-
-enum {
-	TT3650_CMD_CI_TEST = 0x40,
-	TT3650_CMD_CI_RD_CTRL,
-	TT3650_CMD_CI_WR_CTRL,
-	TT3650_CMD_CI_RD_ATTR,
-	TT3650_CMD_CI_WR_ATTR,
-	TT3650_CMD_CI_RESET,
-	TT3650_CMD_CI_SET_VIDEO_PORT
-};
-
-
-static struct stb0899_postproc pctv45e_postproc[] = {
-	{ PCTV_LED_GPIO, STB0899_GPIOPULLUP },
-	{ 0, 0 }
-};
-
-/*
- * stores all private variables for communication with the PCTV452e DVB-S2
- */
-struct pctv452e_state {
-	struct dvb_ca_en50221 ca;
-	struct mutex ca_mutex;
-
-	u8 c;	   /* transaction counter, wraps around...  */
-	u8 initialized; /* set to 1 if 0x15 has been sent */
-	u16 last_rc_key;
-};
-
-static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data,
-			 unsigned int write_len, unsigned int read_len)
-{
-	struct pctv452e_state *state = (struct pctv452e_state *)d->priv;
-	u8 buf[64];
-	u8 id;
-	unsigned int rlen;
-	int ret;
-
-	BUG_ON(NULL == data && 0 != (write_len | read_len));
-	BUG_ON(write_len > 64 - 4);
-	BUG_ON(read_len > 64 - 4);
-
-	id = state->c++;
-
-	buf[0] = SYNC_BYTE_OUT;
-	buf[1] = id;
-	buf[2] = cmd;
-	buf[3] = write_len;
-
-	memcpy(buf + 4, data, write_len);
-
-	rlen = (read_len > 0) ? 64 : 0;
-	ret = dvb_usb_generic_rw(d, buf, 4 + write_len,
-				  buf, rlen, /* delay_ms */ 0);
-	if (0 != ret)
-		goto failed;
-
-	ret = -EIO;
-	if (SYNC_BYTE_IN != buf[0] || id != buf[1])
-		goto failed;
-
-	memcpy(data, buf + 4, read_len);
-
-	return 0;
-
-failed:
-	err("CI error %d; %02X %02X %02X -> %02X %02X %02X.",
-	     ret, SYNC_BYTE_OUT, id, cmd, buf[0], buf[1], buf[2]);
-
-	return ret;
-}
-
-static int tt3650_ci_msg_locked(struct dvb_ca_en50221 *ca,
-				u8 cmd, u8 *data, unsigned int write_len,
-				unsigned int read_len)
-{
-	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
-	struct pctv452e_state *state = (struct pctv452e_state *)d->priv;
-	int ret;
-
-	mutex_lock(&state->ca_mutex);
-	ret = tt3650_ci_msg(d, cmd, data, write_len, read_len);
-	mutex_unlock(&state->ca_mutex);
-
-	return ret;
-}
-
-static int tt3650_ci_read_attribute_mem(struct dvb_ca_en50221 *ca,
-				 int slot, int address)
-{
-	u8 buf[3];
-	int ret;
-
-	if (0 != slot)
-		return -EINVAL;
-
-	buf[0] = (address >> 8) & 0x0F;
-	buf[1] = address;
-
-	ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_RD_ATTR, buf, 2, 3);
-
-	ci_dbg("%s %04x -> %d 0x%02x",
-		__func__, address, ret, buf[2]);
-
-	if (ret < 0)
-		return ret;
-
-	return buf[2];
-}
-
-static int tt3650_ci_write_attribute_mem(struct dvb_ca_en50221 *ca,
-				 int slot, int address, u8 value)
-{
-	u8 buf[3];
-
-	ci_dbg("%s %d 0x%04x 0x%02x",
-		__func__, slot, address, value);
-
-	if (0 != slot)
-		return -EINVAL;
-
-	buf[0] = (address >> 8) & 0x0F;
-	buf[1] = address;
-	buf[2] = value;
-
-	return tt3650_ci_msg_locked(ca, TT3650_CMD_CI_WR_ATTR, buf, 3, 3);
-}
-
-static int tt3650_ci_read_cam_control(struct dvb_ca_en50221 *ca,
-				 int			slot,
-				 u8			address)
-{
-	u8 buf[2];
-	int ret;
-
-	if (0 != slot)
-		return -EINVAL;
-
-	buf[0] = address & 3;
-
-	ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_RD_CTRL, buf, 1, 2);
-
-	ci_dbg("%s 0x%02x -> %d 0x%02x",
-		__func__, address, ret, buf[1]);
-
-	if (ret < 0)
-		return ret;
-
-	return buf[1];
-}
-
-static int tt3650_ci_write_cam_control(struct dvb_ca_en50221 *ca,
-				 int			slot,
-				 u8			address,
-				 u8			value)
-{
-	u8 buf[2];
-
-	ci_dbg("%s %d 0x%02x 0x%02x",
-		__func__, slot, address, value);
-
-	if (0 != slot)
-		return -EINVAL;
-
-	buf[0] = address;
-	buf[1] = value;
-
-	return tt3650_ci_msg_locked(ca, TT3650_CMD_CI_WR_CTRL, buf, 2, 2);
-}
-
-static int tt3650_ci_set_video_port(struct dvb_ca_en50221 *ca,
-				 int			slot,
-				 int			enable)
-{
-	u8 buf[1];
-	int ret;
-
-	ci_dbg("%s %d %d", __func__, slot, enable);
-
-	if (0 != slot)
-		return -EINVAL;
-
-	enable = !!enable;
-	buf[0] = enable;
-
-	ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_SET_VIDEO_PORT, buf, 1, 1);
-	if (ret < 0)
-		return ret;
-
-	if (enable != buf[0]) {
-		err("CI not %sabled.", enable ? "en" : "dis");
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static int tt3650_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
-{
-	return tt3650_ci_set_video_port(ca, slot, /* enable */ 0);
-}
-
-static int tt3650_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
-{
-	return tt3650_ci_set_video_port(ca, slot, /* enable */ 1);
-}
-
-static int tt3650_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot)
-{
-	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
-	struct pctv452e_state *state = (struct pctv452e_state *)d->priv;
-	u8 buf[1];
-	int ret;
-
-	ci_dbg("%s %d", __func__, slot);
-
-	if (0 != slot)
-		return -EINVAL;
-
-	buf[0] = 0;
-
-	mutex_lock(&state->ca_mutex);
-
-	ret = tt3650_ci_msg(d, TT3650_CMD_CI_RESET, buf, 1, 1);
-	if (0 != ret)
-		goto failed;
-
-	msleep(500);
-
-	buf[0] = 1;
-
-	ret = tt3650_ci_msg(d, TT3650_CMD_CI_RESET, buf, 1, 1);
-	if (0 != ret)
-		goto failed;
-
-	msleep(500);
-
-	buf[0] = 0; /* FTA */
-
-	ret = tt3650_ci_msg(d, TT3650_CMD_CI_SET_VIDEO_PORT, buf, 1, 1);
-
- failed:
-	mutex_unlock(&state->ca_mutex);
-
-	return ret;
-}
-
-static int tt3650_ci_poll_slot_status(struct dvb_ca_en50221 *ca,
-				 int			slot,
-				 int			open)
-{
-	u8 buf[1];
-	int ret;
-
-	if (0 != slot)
-		return -EINVAL;
-
-	ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_TEST, buf, 0, 1);
-	if (0 != ret)
-		return ret;
-
-	if (1 == buf[0])
-		return DVB_CA_EN50221_POLL_CAM_PRESENT |
-			DVB_CA_EN50221_POLL_CAM_READY;
-
-	return 0;
-
-}
-
-static void tt3650_ci_uninit(struct dvb_usb_device *d)
-{
-	struct pctv452e_state *state;
-
-	ci_dbg("%s", __func__);
-
-	if (NULL == d)
-		return;
-
-	state = (struct pctv452e_state *)d->priv;
-	if (NULL == state)
-		return;
-
-	if (NULL == state->ca.data)
-		return;
-
-	/* Error ignored. */
-	tt3650_ci_set_video_port(&state->ca, /* slot */ 0, /* enable */ 0);
-
-	dvb_ca_en50221_release(&state->ca);
-
-	memset(&state->ca, 0, sizeof(state->ca));
-}
-
-static int tt3650_ci_init(struct dvb_usb_adapter *a)
-{
-	struct dvb_usb_device *d = a->dev;
-	struct pctv452e_state *state = (struct pctv452e_state *)d->priv;
-	int ret;
-
-	ci_dbg("%s", __func__);
-
-	mutex_init(&state->ca_mutex);
-
-	state->ca.owner = THIS_MODULE;
-	state->ca.read_attribute_mem = tt3650_ci_read_attribute_mem;
-	state->ca.write_attribute_mem = tt3650_ci_write_attribute_mem;
-	state->ca.read_cam_control = tt3650_ci_read_cam_control;
-	state->ca.write_cam_control = tt3650_ci_write_cam_control;
-	state->ca.slot_reset = tt3650_ci_slot_reset;
-	state->ca.slot_shutdown = tt3650_ci_slot_shutdown;
-	state->ca.slot_ts_enable = tt3650_ci_slot_ts_enable;
-	state->ca.poll_slot_status = tt3650_ci_poll_slot_status;
-	state->ca.data = d;
-
-	ret = dvb_ca_en50221_init(&a->dvb_adap,
-				   &state->ca,
-				   /* flags */ 0,
-				   /* n_slots */ 1);
-	if (0 != ret) {
-		err("Cannot initialize CI: Error %d.", ret);
-		memset(&state->ca, 0, sizeof(state->ca));
-		return ret;
-	}
-
-	info("CI initialized.");
-
-	return 0;
-}
-
-#define CMD_BUFFER_SIZE 0x28
-static int pctv452e_i2c_msg(struct dvb_usb_device *d, u8 addr,
-				const u8 *snd_buf, u8 snd_len,
-				u8 *rcv_buf, u8 rcv_len)
-{
-	struct pctv452e_state *state = (struct pctv452e_state *)d->priv;
-	u8 buf[64];
-	u8 id;
-	int ret;
-
-	id = state->c++;
-
-	ret = -EINVAL;
-	if (snd_len > 64 - 7 || rcv_len > 64 - 7)
-		goto failed;
-
-	buf[0] = SYNC_BYTE_OUT;
-	buf[1] = id;
-	buf[2] = PCTV_CMD_I2C;
-	buf[3] = snd_len + 3;
-	buf[4] = addr << 1;
-	buf[5] = snd_len;
-	buf[6] = rcv_len;
-
-	memcpy(buf + 7, snd_buf, snd_len);
-
-	ret = dvb_usb_generic_rw(d, buf, 7 + snd_len,
-				  buf, /* rcv_len */ 64,
-				  /* delay_ms */ 0);
-	if (ret < 0)
-		goto failed;
-
-	/* TT USB protocol error. */
-	ret = -EIO;
-	if (SYNC_BYTE_IN != buf[0] || id != buf[1])
-		goto failed;
-
-	/* I2C device didn't respond as expected. */
-	ret = -EREMOTEIO;
-	if (buf[5] < snd_len || buf[6] < rcv_len)
-		goto failed;
-
-	memcpy(rcv_buf, buf + 7, rcv_len);
-
-	return rcv_len;
-
-failed:
-	err("I2C error %d; %02X %02X  %02X %02X %02X -> "
-	     "%02X %02X  %02X %02X %02X.",
-	     ret, SYNC_BYTE_OUT, id, addr << 1, snd_len, rcv_len,
-	     buf[0], buf[1], buf[4], buf[5], buf[6]);
-
-	return ret;
-}
-
-static int pctv452e_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msg,
-				int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adapter);
-	int i;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	for (i = 0; i < num; i++) {
-		u8 addr, snd_len, rcv_len, *snd_buf, *rcv_buf;
-		int ret;
-
-		if (msg[i].flags & I2C_M_RD) {
-			addr = msg[i].addr;
-			snd_buf = NULL;
-			snd_len = 0;
-			rcv_buf = msg[i].buf;
-			rcv_len = msg[i].len;
-		} else {
-			addr = msg[i].addr;
-			snd_buf = msg[i].buf;
-			snd_len = msg[i].len;
-			rcv_buf = NULL;
-			rcv_len = 0;
-		}
-
-		ret = pctv452e_i2c_msg(d, addr, snd_buf, snd_len, rcv_buf,
-					rcv_len);
-		if (ret < rcv_len)
-			break;
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-	return i;
-}
-
-static u32 pctv452e_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static int pctv452e_power_ctrl(struct dvb_usb_device *d, int i)
-{
-	struct pctv452e_state *state = (struct pctv452e_state *)d->priv;
-	u8 b0[] = { 0xaa, 0, PCTV_CMD_RESET, 1, 0 };
-	u8 rx[PCTV_ANSWER_LEN];
-	int ret;
-
-	info("%s: %d\n", __func__, i);
-
-	if (!i)
-		return 0;
-
-	if (state->initialized)
-		return 0;
-
-	/* hmm where shoud this should go? */
-	ret = usb_set_interface(d->udev, 0, ISOC_INTERFACE_ALTERNATIVE);
-	if (ret != 0)
-		info("%s: Warning set interface returned: %d\n",
-			__func__, ret);
-
-	/* this is a one-time initialization, dont know where to put */
-	b0[1] = state->c++;
-	/* reset board */
-	ret = dvb_usb_generic_rw(d, b0, sizeof(b0), rx, PCTV_ANSWER_LEN, 0);
-	if (ret)
-		return ret;
-
-	b0[1] = state->c++;
-	b0[4] = 1;
-	/* reset board (again?) */
-	ret = dvb_usb_generic_rw(d, b0, sizeof(b0), rx, PCTV_ANSWER_LEN, 0);
-	if (ret)
-		return ret;
-
-	state->initialized = 1;
-
-	return 0;
-}
-
-static int pctv452e_rc_query(struct dvb_usb_device *d)
-{
-	struct pctv452e_state *state = (struct pctv452e_state *)d->priv;
-	u8 b[CMD_BUFFER_SIZE];
-	u8 rx[PCTV_ANSWER_LEN];
-	int ret, i;
-	u8 id = state->c++;
-
-	/* prepare command header  */
-	b[0] = SYNC_BYTE_OUT;
-	b[1] = id;
-	b[2] = PCTV_CMD_IR;
-	b[3] = 0;
-
-	/* send ir request */
-	ret = dvb_usb_generic_rw(d, b, 4, rx, PCTV_ANSWER_LEN, 0);
-	if (ret != 0)
-		return ret;
-
-	if (debug > 3) {
-		info("%s: read: %2d: %02x %02x %02x: ", __func__,
-				ret, rx[0], rx[1], rx[2]);
-		for (i = 0; (i < rx[3]) && ((i+3) < PCTV_ANSWER_LEN); i++)
-			info(" %02x", rx[i+3]);
-
-		info("\n");
-	}
-
-	if ((rx[3] == 9) &&  (rx[12] & 0x01)) {
-		/* got a "press" event */
-		state->last_rc_key = (rx[7] << 8) | rx[6];
-		if (debug > 2)
-			info("%s: cmd=0x%02x sys=0x%02x\n",
-				__func__, rx[6], rx[7]);
-
-		rc_keydown(d->rc_dev, state->last_rc_key, 0);
-	} else if (state->last_rc_key) {
-		rc_keyup(d->rc_dev);
-		state->last_rc_key = 0;
-	}
-
-	return 0;
-}
-
-static int pctv452e_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
-{
-	const u8 mem_addr[] = { 0x1f, 0xcc };
-	u8 encoded_mac[20];
-	int ret;
-
-	ret = -EAGAIN;
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		goto failed;
-
-	ret = pctv452e_i2c_msg(d, I2C_ADDR_24C16,
-				mem_addr + 1, /* snd_len */ 1,
-				encoded_mac, /* rcv_len */ 20);
-	if (-EREMOTEIO == ret)
-		/* Caution! A 24C16 interprets 0xA2 0x1F 0xCC as a
-		   byte write if /WC is low. */
-		ret = pctv452e_i2c_msg(d, I2C_ADDR_24C64,
-					mem_addr, 2,
-					encoded_mac, 20);
-
-	mutex_unlock(&d->i2c_mutex);
-
-	if (20 != ret)
-		goto failed;
-
-	ret = ttpci_eeprom_decode_mac(mac, encoded_mac);
-	if (0 != ret)
-		goto failed;
-
-	return 0;
-
-failed:
-	memset(mac, 0, 6);
-
-	return ret;
-}
-
-static const struct stb0899_s1_reg pctv452e_init_dev[] = {
-	{ STB0899_DISCNTRL1,	0x26 },
-	{ STB0899_DISCNTRL2,	0x80 },
-	{ STB0899_DISRX_ST0,	0x04 },
-	{ STB0899_DISRX_ST1,	0x20 },
-	{ STB0899_DISPARITY,	0x00 },
-	{ STB0899_DISFIFO,	0x00 },
-	{ STB0899_DISF22,	0x99 },
-	{ STB0899_DISF22RX,	0x85 }, /* 0xa8 */
-	{ STB0899_ACRPRESC,	0x11 },
-	{ STB0899_ACRDIV1,	0x0a },
-	{ STB0899_ACRDIV2,	0x05 },
-	{ STB0899_DACR1	,	0x00 },
-	{ STB0899_DACR2	,	0x00 },
-	{ STB0899_OUTCFG,	0x00 },
-	{ STB0899_MODECFG,	0x00 }, /* Inversion */
-	{ STB0899_IRQMSK_3,	0xf3 },
-	{ STB0899_IRQMSK_2,	0xfc },
-	{ STB0899_IRQMSK_1,	0xff },
-	{ STB0899_IRQMSK_0,	0xff },
-	{ STB0899_I2CCFG,	0x88 },
-	{ STB0899_I2CRPT,	0x58 },
-	{ STB0899_GPIO00CFG,	0x82 },
-	{ STB0899_GPIO01CFG,	0x82 }, /* LED: 0x02 green, 0x82 orange */
-	{ STB0899_GPIO02CFG,	0x82 },
-	{ STB0899_GPIO03CFG,	0x82 },
-	{ STB0899_GPIO04CFG,	0x82 },
-	{ STB0899_GPIO05CFG,	0x82 },
-	{ STB0899_GPIO06CFG,	0x82 },
-	{ STB0899_GPIO07CFG,	0x82 },
-	{ STB0899_GPIO08CFG,	0x82 },
-	{ STB0899_GPIO09CFG,	0x82 },
-	{ STB0899_GPIO10CFG,	0x82 },
-	{ STB0899_GPIO11CFG,	0x82 },
-	{ STB0899_GPIO12CFG,	0x82 },
-	{ STB0899_GPIO13CFG,	0x82 },
-	{ STB0899_GPIO14CFG,	0x82 },
-	{ STB0899_GPIO15CFG,	0x82 },
-	{ STB0899_GPIO16CFG,	0x82 },
-	{ STB0899_GPIO17CFG,	0x82 },
-	{ STB0899_GPIO18CFG,	0x82 },
-	{ STB0899_GPIO19CFG,	0x82 },
-	{ STB0899_GPIO20CFG,	0x82 },
-	{ STB0899_SDATCFG,	0xb8 },
-	{ STB0899_SCLTCFG,	0xba },
-	{ STB0899_AGCRFCFG,	0x1c }, /* 0x11 DVB-S; 0x1c DVB-S2 (1c, rjkm) */
-	{ STB0899_GPIO22,	0x82 },
-	{ STB0899_GPIO21,	0x91 },
-	{ STB0899_DIRCLKCFG,	0x82 },
-	{ STB0899_CLKOUT27CFG,	0x7e },
-	{ STB0899_STDBYCFG,	0x82 },
-	{ STB0899_CS0CFG,	0x82 },
-	{ STB0899_CS1CFG,	0x82 },
-	{ STB0899_DISEQCOCFG,	0x20 },
-	{ STB0899_NCOARSE,	0x15 }, /* 0x15 27Mhz, F/3 198MHz, F/6 108MHz */
-	{ STB0899_SYNTCTRL,	0x00 }, /* 0x00 CLKI, 0x02 XTALI */
-	{ STB0899_FILTCTRL,	0x00 },
-	{ STB0899_SYSCTRL,	0x00 },
-	{ STB0899_STOPCLK1,	0x20 }, /* orig: 0x00 budget-ci: 0x20 */
-	{ STB0899_STOPCLK2,	0x00 },
-	{ STB0899_INTBUFCTRL,	0x0a },
-	{ STB0899_AGC2I1,	0x00 },
-	{ STB0899_AGC2I2,	0x00 },
-	{ STB0899_AGCIQIN,	0x00 },
-	{ STB0899_TSTRES,	0x40 }, /* rjkm */
-	{ 0xffff,		0xff },
-};
-
-static const struct stb0899_s1_reg pctv452e_init_s1_demod[] = {
-	{ STB0899_DEMOD,	0x00 },
-	{ STB0899_RCOMPC,	0xc9 },
-	{ STB0899_AGC1CN,	0x01 },
-	{ STB0899_AGC1REF,	0x10 },
-	{ STB0899_RTC,		0x23 },
-	{ STB0899_TMGCFG,	0x4e },
-	{ STB0899_AGC2REF,	0x34 },
-	{ STB0899_TLSR,		0x84 },
-	{ STB0899_CFD,		0xf7 },
-	{ STB0899_ACLC,		0x87 },
-	{ STB0899_BCLC,		0x94 },
-	{ STB0899_EQON,		0x41 },
-	{ STB0899_LDT,		0xf1 },
-	{ STB0899_LDT2,		0xe3 },
-	{ STB0899_EQUALREF,	0xb4 },
-	{ STB0899_TMGRAMP,	0x10 },
-	{ STB0899_TMGTHD,	0x30 },
-	{ STB0899_IDCCOMP,	0xfd },
-	{ STB0899_QDCCOMP,	0xff },
-	{ STB0899_POWERI,	0x0c },
-	{ STB0899_POWERQ,	0x0f },
-	{ STB0899_RCOMP,	0x6c },
-	{ STB0899_AGCIQIN,	0x80 },
-	{ STB0899_AGC2I1,	0x06 },
-	{ STB0899_AGC2I2,	0x00 },
-	{ STB0899_TLIR,		0x30 },
-	{ STB0899_RTF,		0x7f },
-	{ STB0899_DSTATUS,	0x00 },
-	{ STB0899_LDI,		0xbc },
-	{ STB0899_CFRM,		0xea },
-	{ STB0899_CFRL,		0x31 },
-	{ STB0899_NIRM,		0x2b },
-	{ STB0899_NIRL,		0x80 },
-	{ STB0899_ISYMB,	0x1d },
-	{ STB0899_QSYMB,	0xa6 },
-	{ STB0899_SFRH,		0x2f },
-	{ STB0899_SFRM,		0x68 },
-	{ STB0899_SFRL,		0x40 },
-	{ STB0899_SFRUPH,	0x2f },
-	{ STB0899_SFRUPM,	0x68 },
-	{ STB0899_SFRUPL,	0x40 },
-	{ STB0899_EQUAI1,	0x02 },
-	{ STB0899_EQUAQ1,	0xff },
-	{ STB0899_EQUAI2,	0x04 },
-	{ STB0899_EQUAQ2,	0x05 },
-	{ STB0899_EQUAI3,	0x02 },
-	{ STB0899_EQUAQ3,	0xfd },
-	{ STB0899_EQUAI4,	0x03 },
-	{ STB0899_EQUAQ4,	0x07 },
-	{ STB0899_EQUAI5,	0x08 },
-	{ STB0899_EQUAQ5,	0xf5 },
-	{ STB0899_DSTATUS2,	0x00 },
-	{ STB0899_VSTATUS,	0x00 },
-	{ STB0899_VERROR,	0x86 },
-	{ STB0899_IQSWAP,	0x2a },
-	{ STB0899_ECNT1M,	0x00 },
-	{ STB0899_ECNT1L,	0x00 },
-	{ STB0899_ECNT2M,	0x00 },
-	{ STB0899_ECNT2L,	0x00 },
-	{ STB0899_ECNT3M,	0x0a },
-	{ STB0899_ECNT3L,	0xad },
-	{ STB0899_FECAUTO1,	0x06 },
-	{ STB0899_FECM,		0x01 },
-	{ STB0899_VTH12,	0xb0 },
-	{ STB0899_VTH23,	0x7a },
-	{ STB0899_VTH34,	0x58 },
-	{ STB0899_VTH56,	0x38 },
-	{ STB0899_VTH67,	0x34 },
-	{ STB0899_VTH78,	0x24 },
-	{ STB0899_PRVIT,	0xff },
-	{ STB0899_VITSYNC,	0x19 },
-	{ STB0899_RSULC,	0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
-	{ STB0899_TSULC,	0x42 },
-	{ STB0899_RSLLC,	0x41 },
-	{ STB0899_TSLPL,	0x12 },
-	{ STB0899_TSCFGH,	0x0c },
-	{ STB0899_TSCFGM,	0x00 },
-	{ STB0899_TSCFGL,	0x00 },
-	{ STB0899_TSOUT,	0x69 }, /* 0x0d for CAM */
-	{ STB0899_RSSYNCDEL,	0x00 },
-	{ STB0899_TSINHDELH,	0x02 },
-	{ STB0899_TSINHDELM,	0x00 },
-	{ STB0899_TSINHDELL,	0x00 },
-	{ STB0899_TSLLSTKM,	0x1b },
-	{ STB0899_TSLLSTKL,	0xb3 },
-	{ STB0899_TSULSTKM,	0x00 },
-	{ STB0899_TSULSTKL,	0x00 },
-	{ STB0899_PCKLENUL,	0xbc },
-	{ STB0899_PCKLENLL,	0xcc },
-	{ STB0899_RSPCKLEN,	0xbd },
-	{ STB0899_TSSTATUS,	0x90 },
-	{ STB0899_ERRCTRL1,	0xb6 },
-	{ STB0899_ERRCTRL2,	0x95 },
-	{ STB0899_ERRCTRL3,	0x8d },
-	{ STB0899_DMONMSK1,	0x27 },
-	{ STB0899_DMONMSK0,	0x03 },
-	{ STB0899_DEMAPVIT,	0x5c },
-	{ STB0899_PLPARM,	0x19 },
-	{ STB0899_PDELCTRL,	0x48 },
-	{ STB0899_PDELCTRL2,	0x00 },
-	{ STB0899_BBHCTRL1,	0x00 },
-	{ STB0899_BBHCTRL2,	0x00 },
-	{ STB0899_HYSTTHRESH,	0x77 },
-	{ STB0899_MATCSTM,	0x00 },
-	{ STB0899_MATCSTL,	0x00 },
-	{ STB0899_UPLCSTM,	0x00 },
-	{ STB0899_UPLCSTL,	0x00 },
-	{ STB0899_DFLCSTM,	0x00 },
-	{ STB0899_DFLCSTL,	0x00 },
-	{ STB0899_SYNCCST,	0x00 },
-	{ STB0899_SYNCDCSTM,	0x00 },
-	{ STB0899_SYNCDCSTL,	0x00 },
-	{ STB0899_ISI_ENTRY,	0x00 },
-	{ STB0899_ISI_BIT_EN,	0x00 },
-	{ STB0899_MATSTRM,	0xf0 },
-	{ STB0899_MATSTRL,	0x02 },
-	{ STB0899_UPLSTRM,	0x45 },
-	{ STB0899_UPLSTRL,	0x60 },
-	{ STB0899_DFLSTRM,	0xe3 },
-	{ STB0899_DFLSTRL,	0x00 },
-	{ STB0899_SYNCSTR,	0x47 },
-	{ STB0899_SYNCDSTRM,	0x05 },
-	{ STB0899_SYNCDSTRL,	0x18 },
-	{ STB0899_CFGPDELSTATUS1, 0x19 },
-	{ STB0899_CFGPDELSTATUS2, 0x2b },
-	{ STB0899_BBFERRORM,	0x00 },
-	{ STB0899_BBFERRORL,	0x01 },
-	{ STB0899_UPKTERRORM,	0x00 },
-	{ STB0899_UPKTERRORL,	0x00 },
-	{ 0xffff,		0xff },
-};
-
-static struct stb0899_config stb0899_config = {
-	.init_dev	= pctv452e_init_dev,
-	.init_s2_demod	= stb0899_s2_init_2,
-	.init_s1_demod	= pctv452e_init_s1_demod,
-	.init_s2_fec	= stb0899_s2_init_4,
-	.init_tst	= stb0899_s1_init_5,
-
-	.demod_address   = I2C_ADDR_STB0899, /* I2C Address */
-	.block_sync_mode = STB0899_SYNC_FORCED, /* ? */
-
-	.xtal_freq       = 27000000,	 /* Assume Hz ? */
-	.inversion       = IQ_SWAP_ON,       /* ? */
-
-	.lo_clk	  = 76500000,
-	.hi_clk	  = 99000000,
-
-	.ts_output_mode  = 0,	/* Use parallel mode */
-	.clock_polarity  = 0,
-	.data_clk_parity = 0,
-	.fec_mode	= 0,
-
-	.esno_ave	    = STB0899_DVBS2_ESNO_AVE,
-	.esno_quant	  = STB0899_DVBS2_ESNO_QUANT,
-	.avframes_coarse     = STB0899_DVBS2_AVFRAMES_COARSE,
-	.avframes_fine       = STB0899_DVBS2_AVFRAMES_FINE,
-	.miss_threshold      = STB0899_DVBS2_MISS_THRESHOLD,
-	.uwp_threshold_acq   = STB0899_DVBS2_UWP_THRESHOLD_ACQ,
-	.uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK,
-	.uwp_threshold_sof   = STB0899_DVBS2_UWP_THRESHOLD_SOF,
-	.sof_search_timeout  = STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
-
-	.btr_nco_bits	  = STB0899_DVBS2_BTR_NCO_BITS,
-	.btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
-	.crl_nco_bits	  = STB0899_DVBS2_CRL_NCO_BITS,
-	.ldpc_max_iter	 = STB0899_DVBS2_LDPC_MAX_ITER,
-
-	.tuner_get_frequency	= stb6100_get_frequency,
-	.tuner_set_frequency	= stb6100_set_frequency,
-	.tuner_set_bandwidth	= stb6100_set_bandwidth,
-	.tuner_get_bandwidth	= stb6100_get_bandwidth,
-	.tuner_set_rfsiggain	= NULL,
-
-	/* helper for switching LED green/orange */
-	.postproc = pctv45e_postproc
-};
-
-static struct stb6100_config stb6100_config = {
-	.tuner_address = I2C_ADDR_STB6100,
-	.refclock      = 27000000
-};
-
-
-static struct i2c_algorithm pctv452e_i2c_algo = {
-	.master_xfer   = pctv452e_i2c_xfer,
-	.functionality = pctv452e_i2c_func
-};
-
-static int pctv452e_frontend_attach(struct dvb_usb_adapter *a)
-{
-	struct usb_device_id *id;
-
-	a->fe_adap[0].fe = dvb_attach(stb0899_attach, &stb0899_config,
-						&a->dev->i2c_adap);
-	if (!a->fe_adap[0].fe)
-		return -ENODEV;
-	if ((dvb_attach(lnbp22_attach, a->fe_adap[0].fe,
-					&a->dev->i2c_adap)) == 0)
-		err("Cannot attach lnbp22\n");
-
-	id = a->dev->desc->warm_ids[0];
-	if (USB_VID_TECHNOTREND == id->idVendor
-	    && USB_PID_TECHNOTREND_CONNECT_S2_3650_CI == id->idProduct)
-		/* Error ignored. */
-		tt3650_ci_init(a);
-
-	return 0;
-}
-
-static int pctv452e_tuner_attach(struct dvb_usb_adapter *a)
-{
-	if (!a->fe_adap[0].fe)
-		return -ENODEV;
-	if (dvb_attach(stb6100_attach, a->fe_adap[0].fe, &stb6100_config,
-					&a->dev->i2c_adap) == 0) {
-		err("%s failed\n", __func__);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-static struct usb_device_id pctv452e_usb_table[] = {
-	{USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_452E)},
-	{USB_DEVICE(USB_VID_TECHNOTREND, USB_PID_TECHNOTREND_CONNECT_S2_3600)},
-	{USB_DEVICE(USB_VID_TECHNOTREND,
-				USB_PID_TECHNOTREND_CONNECT_S2_3650_CI)},
-	{}
-};
-MODULE_DEVICE_TABLE(usb, pctv452e_usb_table);
-
-static struct dvb_usb_device_properties pctv452e_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER, /* more ? */
-	.usb_ctrl = DEVICE_SPECIFIC,
-
-	.size_of_priv     = sizeof(struct pctv452e_state),
-
-	.power_ctrl       = pctv452e_power_ctrl,
-
-	.rc.core = {
-		.rc_codes	= RC_MAP_DIB0700_RC5_TABLE,
-		.allowed_protos	= RC_TYPE_UNKNOWN,
-		.rc_query	= pctv452e_rc_query,
-		.rc_interval	= 100,
-	},
-
-	.num_adapters     = 1,
-	.adapter = {{
-		.num_frontends = 1,
-		.fe = {{
-			.frontend_attach  = pctv452e_frontend_attach,
-			.tuner_attach     = pctv452e_tuner_attach,
-
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type     = USB_ISOC,
-				.count    = 4,
-				.endpoint = 0x02,
-				.u = {
-					.isoc = {
-						.framesperurb = 4,
-						.framesize    = 940,
-						.interval     = 1
-					}
-				}
-			},
-		} },
-	} },
-
-	.i2c_algo = &pctv452e_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 1, /* allow generice rw function */
-
-	.num_device_descs = 1,
-	.devices = {
-		{ .name = "PCTV HDTV USB",
-		  .cold_ids = { NULL, NULL }, /* this is a warm only device */
-		  .warm_ids = { &pctv452e_usb_table[0], NULL }
-		},
-		{ 0 },
-	}
-};
-
-static struct dvb_usb_device_properties tt_connect_s2_3600_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER, /* more ? */
-	.usb_ctrl = DEVICE_SPECIFIC,
-
-	.size_of_priv		= sizeof(struct pctv452e_state),
-
-	.power_ctrl		= pctv452e_power_ctrl,
-	.read_mac_address	= pctv452e_read_mac_address,
-
-	.rc.core = {
-		.rc_codes	= RC_MAP_TT_1500,
-		.allowed_protos	= RC_TYPE_UNKNOWN,
-		.rc_query	= pctv452e_rc_query,
-		.rc_interval	= 100,
-	},
-
-	.num_adapters		= 1,
-	.adapter = {{
-		.num_frontends = 1,
-		.fe = {{
-			.frontend_attach = pctv452e_frontend_attach,
-			.tuner_attach = pctv452e_tuner_attach,
-
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_ISOC,
-				.count = 7,
-				.endpoint = 0x02,
-				.u = {
-					.isoc = {
-						.framesperurb = 4,
-						.framesize = 940,
-						.interval = 1
-					}
-				}
-			},
-
-		} },
-	} },
-
-	.i2c_algo = &pctv452e_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 1, /* allow generic rw function*/
-
-	.num_device_descs = 2,
-	.devices = {
-		{ .name = "Technotrend TT Connect S2-3600",
-		  .cold_ids = { NULL, NULL }, /* this is a warm only device */
-		  .warm_ids = { &pctv452e_usb_table[1], NULL }
-		},
-		{ .name = "Technotrend TT Connect S2-3650-CI",
-		  .cold_ids = { NULL, NULL },
-		  .warm_ids = { &pctv452e_usb_table[2], NULL }
-		},
-		{ 0 },
-	}
-};
-
-static void pctv452e_usb_disconnect(struct usb_interface *intf)
-{
-	struct dvb_usb_device *d = usb_get_intfdata(intf);
-
-	tt3650_ci_uninit(d);
-	dvb_usb_device_exit(intf);
-}
-
-static int pctv452e_usb_probe(struct usb_interface *intf,
-				const struct usb_device_id *id)
-{
-	if (0 == dvb_usb_device_init(intf, &pctv452e_properties,
-					THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &tt_connect_s2_3600_properties,
-					THIS_MODULE, NULL, adapter_nr))
-		return 0;
-
-	return -ENODEV;
-}
-
-static struct usb_driver pctv452e_usb_driver = {
-	.name       = "pctv452e",
-	.probe      = pctv452e_usb_probe,
-	.disconnect = pctv452e_usb_disconnect,
-	.id_table   = pctv452e_usb_table,
-};
-
-module_usb_driver(pctv452e_usb_driver);
-
-MODULE_AUTHOR("Dominik Kuhlen <dkuhlen@gmx.net>");
-MODULE_AUTHOR("Andre Weidemann <Andre.Weidemann@web.de>");
-MODULE_AUTHOR("Michael H. Schimek <mschimek@gmx.at>");
-MODULE_DESCRIPTION("Pinnacle PCTV HDTV USB DVB / TT connect S2-3600 Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.c b/drivers/media/dvb/dvb-usb/rtl28xxu.c
deleted file mode 100644
index 6bd0bd7..0000000
--- a/drivers/media/dvb/dvb-usb/rtl28xxu.c
+++ /dev/null
@@ -1,1428 +0,0 @@
-/*
- * Realtek RTL28xxU DVB USB driver
- *
- * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
- * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
- * Copyright (C) 2012 Thomas Mair <thomas.mair86@googlemail.com>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include "rtl28xxu.h"
-
-#include "rtl2830.h"
-#include "rtl2832.h"
-
-#include "qt1010.h"
-#include "mt2060.h"
-#include "mxl5005s.h"
-#include "fc0012.h"
-#include "fc0013.h"
-
-/* debug */
-static int dvb_usb_rtl28xxu_debug;
-module_param_named(debug, dvb_usb_rtl28xxu_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req)
-{
-	int ret;
-	unsigned int pipe;
-	u8 requesttype;
-	u8 *buf;
-
-	buf = kmalloc(req->size, GFP_KERNEL);
-	if (!buf) {
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	if (req->index & CMD_WR_FLAG) {
-		/* write */
-		memcpy(buf, req->data, req->size);
-		requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
-		pipe = usb_sndctrlpipe(d->udev, 0);
-	} else {
-		/* read */
-		requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
-		pipe = usb_rcvctrlpipe(d->udev, 0);
-	}
-
-	ret = usb_control_msg(d->udev, pipe, 0, requesttype, req->value,
-			req->index, buf, req->size, 1000);
-	if (ret > 0)
-		ret = 0;
-
-	deb_dump(0, requesttype, req->value, req->index, buf, req->size,
-			deb_xfer);
-
-	/* read request, copy returned data to return buf */
-	if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
-		memcpy(req->data, buf, req->size);
-
-	kfree(buf);
-
-	if (ret)
-		goto err;
-
-	return ret;
-err:
-	deb_info("%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int rtl28xx_wr_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len)
-{
-	struct rtl28xxu_req req;
-
-	if (reg < 0x3000)
-		req.index = CMD_USB_WR;
-	else if (reg < 0x4000)
-		req.index = CMD_SYS_WR;
-	else
-		req.index = CMD_IR_WR;
-
-	req.value = reg;
-	req.size = len;
-	req.data = val;
-
-	return rtl28xxu_ctrl_msg(d, &req);
-}
-
-static int rtl2831_rd_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len)
-{
-	struct rtl28xxu_req req;
-
-	if (reg < 0x3000)
-		req.index = CMD_USB_RD;
-	else if (reg < 0x4000)
-		req.index = CMD_SYS_RD;
-	else
-		req.index = CMD_IR_RD;
-
-	req.value = reg;
-	req.size = len;
-	req.data = val;
-
-	return rtl28xxu_ctrl_msg(d, &req);
-}
-
-static int rtl28xx_wr_reg(struct dvb_usb_device *d, u16 reg, u8 val)
-{
-	return rtl28xx_wr_regs(d, reg, &val, 1);
-}
-
-static int rtl28xx_rd_reg(struct dvb_usb_device *d, u16 reg, u8 *val)
-{
-	return rtl2831_rd_regs(d, reg, val, 1);
-}
-
-/* I2C */
-static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
-	int num)
-{
-	int ret;
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	struct rtl28xxu_priv *priv = d->priv;
-	struct rtl28xxu_req req;
-
-	/*
-	 * It is not known which are real I2C bus xfer limits, but testing
-	 * with RTL2831U + MT2060 gives max RD 24 and max WR 22 bytes.
-	 * TODO: find out RTL2832U lens
-	 */
-
-	/*
-	 * I2C adapter logic looks rather complicated due to fact it handles
-	 * three different access methods. Those methods are;
-	 * 1) integrated demod access
-	 * 2) old I2C access
-	 * 3) new I2C access
-	 *
-	 * Used method is selected in order 1, 2, 3. Method 3 can handle all
-	 * requests but there is two reasons why not use it always;
-	 * 1) It is most expensive, usually two USB messages are needed
-	 * 2) At least RTL2831U does not support it
-	 *
-	 * Method 3 is needed in case of I2C write+read (typical register read)
-	 * where write is more than one byte.
-	 */
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	if (num == 2 && !(msg[0].flags & I2C_M_RD) &&
-		(msg[1].flags & I2C_M_RD)) {
-		if (msg[0].len > 24 || msg[1].len > 24) {
-			/* TODO: check msg[0].len max */
-			ret = -EOPNOTSUPP;
-			goto err_mutex_unlock;
-		} else if (msg[0].addr == 0x10) {
-			/* method 1 - integrated demod */
-			req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
-			req.index = CMD_DEMOD_RD | priv->page;
-			req.size = msg[1].len;
-			req.data = &msg[1].buf[0];
-			ret = rtl28xxu_ctrl_msg(d, &req);
-		} else if (msg[0].len < 2) {
-			/* method 2 - old I2C */
-			req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
-			req.index = CMD_I2C_RD;
-			req.size = msg[1].len;
-			req.data = &msg[1].buf[0];
-			ret = rtl28xxu_ctrl_msg(d, &req);
-		} else {
-			/* method 3 - new I2C */
-			req.value = (msg[0].addr << 1);
-			req.index = CMD_I2C_DA_WR;
-			req.size = msg[0].len;
-			req.data = msg[0].buf;
-			ret = rtl28xxu_ctrl_msg(d, &req);
-			if (ret)
-				goto err_mutex_unlock;
-
-			req.value = (msg[0].addr << 1);
-			req.index = CMD_I2C_DA_RD;
-			req.size = msg[1].len;
-			req.data = msg[1].buf;
-			ret = rtl28xxu_ctrl_msg(d, &req);
-		}
-	} else if (num == 1 && !(msg[0].flags & I2C_M_RD)) {
-		if (msg[0].len > 22) {
-			/* TODO: check msg[0].len max */
-			ret = -EOPNOTSUPP;
-			goto err_mutex_unlock;
-		} else if (msg[0].addr == 0x10) {
-			/* method 1 - integrated demod */
-			if (msg[0].buf[0] == 0x00) {
-				/* save demod page for later demod access */
-				priv->page = msg[0].buf[1];
-				ret = 0;
-			} else {
-				req.value = (msg[0].buf[0] << 8) |
-					(msg[0].addr << 1);
-				req.index = CMD_DEMOD_WR | priv->page;
-				req.size = msg[0].len-1;
-				req.data = &msg[0].buf[1];
-				ret = rtl28xxu_ctrl_msg(d, &req);
-			}
-		} else if (msg[0].len < 23) {
-			/* method 2 - old I2C */
-			req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
-			req.index = CMD_I2C_WR;
-			req.size = msg[0].len-1;
-			req.data = &msg[0].buf[1];
-			ret = rtl28xxu_ctrl_msg(d, &req);
-		} else {
-			/* method 3 - new I2C */
-			req.value = (msg[0].addr << 1);
-			req.index = CMD_I2C_DA_WR;
-			req.size = msg[0].len;
-			req.data = msg[0].buf;
-			ret = rtl28xxu_ctrl_msg(d, &req);
-		}
-	} else {
-		ret = -EINVAL;
-	}
-
-err_mutex_unlock:
-	mutex_unlock(&d->i2c_mutex);
-
-	return ret ? ret : num;
-}
-
-static u32 rtl28xxu_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm rtl28xxu_i2c_algo = {
-	.master_xfer   = rtl28xxu_i2c_xfer,
-	.functionality = rtl28xxu_i2c_func,
-};
-
-static struct rtl2830_config rtl28xxu_rtl2830_mt2060_config = {
-	.i2c_addr = 0x10, /* 0x20 */
-	.xtal = 28800000,
-	.ts_mode = 0,
-	.spec_inv = 1,
-	.if_dvbt = 36150000,
-	.vtop = 0x20,
-	.krf = 0x04,
-	.agc_targ_val = 0x2d,
-
-};
-
-static struct rtl2830_config rtl28xxu_rtl2830_qt1010_config = {
-	.i2c_addr = 0x10, /* 0x20 */
-	.xtal = 28800000,
-	.ts_mode = 0,
-	.spec_inv = 1,
-	.if_dvbt = 36125000,
-	.vtop = 0x20,
-	.krf = 0x04,
-	.agc_targ_val = 0x2d,
-};
-
-static struct rtl2830_config rtl28xxu_rtl2830_mxl5005s_config = {
-	.i2c_addr = 0x10, /* 0x20 */
-	.xtal = 28800000,
-	.ts_mode = 0,
-	.spec_inv = 0,
-	.if_dvbt = 4570000,
-	.vtop = 0x3f,
-	.krf = 0x04,
-	.agc_targ_val = 0x3e,
-};
-
-static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	int ret;
-	struct rtl28xxu_priv *priv = adap->dev->priv;
-	u8 buf[1];
-	struct rtl2830_config *rtl2830_config;
-	/* open RTL2831U/RTL2830 I2C gate */
-	struct rtl28xxu_req req_gate = { 0x0120, 0x0011, 0x0001, "\x08" };
-	/* for MT2060 tuner probe */
-	struct rtl28xxu_req req_mt2060 = { 0x00c0, CMD_I2C_RD, 1, buf };
-	/* for QT1010 tuner probe */
-	struct rtl28xxu_req req_qt1010 = { 0x0fc4, CMD_I2C_RD, 1, buf };
-
-	deb_info("%s:\n", __func__);
-
-	/*
-	 * RTL2831U GPIOs
-	 * =========================================================
-	 * GPIO0 | tuner#0 | 0 off | 1 on  | MXL5005S (?)
-	 * GPIO2 | LED     | 0 off | 1 on  |
-	 * GPIO4 | tuner#1 | 0 on  | 1 off | MT2060
-	 */
-
-	/* GPIO direction */
-	ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_DIR, 0x0a);
-	if (ret)
-		goto err;
-
-	/* enable as output GPIO0, GPIO2, GPIO4 */
-	ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_EN, 0x15);
-	if (ret)
-		goto err;
-
-	/*
-	 * Probe used tuner. We need to know used tuner before demod attach
-	 * since there is some demod params needed to set according to tuner.
-	 */
-
-	/* demod needs some time to wake up */
-	msleep(20);
-
-	/* open demod I2C gate */
-	ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate);
-	if (ret)
-		goto err;
-
-	/* check QT1010 ID(?) register; reg=0f val=2c */
-	ret = rtl28xxu_ctrl_msg(adap->dev, &req_qt1010);
-	if (ret == 0 && buf[0] == 0x2c) {
-		priv->tuner = TUNER_RTL2830_QT1010;
-		rtl2830_config = &rtl28xxu_rtl2830_qt1010_config;
-		deb_info("%s: QT1010\n", __func__);
-		goto found;
-	} else {
-		deb_info("%s: QT1010 probe failed=%d - %02x\n",
-			__func__, ret, buf[0]);
-	}
-
-	/* open demod I2C gate */
-	ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate);
-	if (ret)
-		goto err;
-
-	/* check MT2060 ID register; reg=00 val=63 */
-	ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2060);
-	if (ret == 0 && buf[0] == 0x63) {
-		priv->tuner = TUNER_RTL2830_MT2060;
-		rtl2830_config = &rtl28xxu_rtl2830_mt2060_config;
-		deb_info("%s: MT2060\n", __func__);
-		goto found;
-	} else {
-		deb_info("%s: MT2060 probe failed=%d - %02x\n",
-			__func__, ret, buf[0]);
-	}
-
-	/* assume MXL5005S */
-	ret = 0;
-	priv->tuner = TUNER_RTL2830_MXL5005S;
-	rtl2830_config = &rtl28xxu_rtl2830_mxl5005s_config;
-	deb_info("%s: MXL5005S\n", __func__);
-	goto found;
-
-found:
-	/* attach demodulator */
-	adap->fe_adap[0].fe = dvb_attach(rtl2830_attach, rtl2830_config,
-		&adap->dev->i2c_adap);
-	if (adap->fe_adap[0].fe == NULL) {
-		ret = -ENODEV;
-		goto err;
-	}
-
-	return ret;
-err:
-	deb_info("%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static struct rtl2832_config rtl28xxu_rtl2832_fc0012_config = {
-	.i2c_addr = 0x10, /* 0x20 */
-	.xtal = 28800000,
-	.if_dvbt = 0,
-	.tuner = TUNER_RTL2832_FC0012
-};
-
-static struct rtl2832_config rtl28xxu_rtl2832_fc0013_config = {
-	.i2c_addr = 0x10, /* 0x20 */
-	.xtal = 28800000,
-	.if_dvbt = 0,
-	.tuner = TUNER_RTL2832_FC0013
-};
-
-static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d,
-		int cmd, int arg)
-{
-	int ret;
-	u8 val;
-
-	deb_info("%s cmd=%d arg=%d\n", __func__, cmd, arg);
-	switch (cmd) {
-	case FC_FE_CALLBACK_VHF_ENABLE:
-		/* set output values */
-		ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
-		if (ret)
-			goto err;
-
-		if (arg)
-			val &= 0xbf; /* set GPIO6 low */
-		else
-			val |= 0x40; /* set GPIO6 high */
-
-
-		ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val);
-		if (ret)
-			goto err;
-		break;
-	default:
-		ret = -EINVAL;
-		goto err;
-	}
-	return 0;
-
-err:
-	err("%s: failed=%d\n", __func__, ret);
-
-	return ret;
-}
-
-
-static int rtl2832u_fc0013_tuner_callback(struct dvb_usb_device *d,
-		int cmd, int arg)
-{
-	/* TODO implement*/
-	return 0;
-}
-
-static int rtl2832u_tuner_callback(struct dvb_usb_device *d, int cmd, int arg)
-{
-	struct rtl28xxu_priv *priv = d->priv;
-
-	switch (priv->tuner) {
-	case TUNER_RTL2832_FC0012:
-		return rtl2832u_fc0012_tuner_callback(d, cmd, arg);
-
-	case TUNER_RTL2832_FC0013:
-		return rtl2832u_fc0013_tuner_callback(d, cmd, arg);
-	default:
-		break;
-	}
-
-	return -ENODEV;
-}
-
-static int rtl2832u_frontend_callback(void *adapter_priv, int component,
-				    int cmd, int arg)
-{
-	struct i2c_adapter *adap = adapter_priv;
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-
-	switch (component) {
-	case DVB_FRONTEND_COMPONENT_TUNER:
-		return rtl2832u_tuner_callback(d, cmd, arg);
-	default:
-		break;
-	}
-
-	return -EINVAL;
-}
-
-
-
-
-static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	int ret;
-	struct rtl28xxu_priv *priv = adap->dev->priv;
-	struct rtl2832_config *rtl2832_config;
-
-	u8 buf[2], val;
-	/* open RTL2832U/RTL2832 I2C gate */
-	struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"};
-	/* close RTL2832U/RTL2832 I2C gate */
-	struct rtl28xxu_req req_gate_close = {0x0120, 0x0011, 0x0001, "\x10"};
-	/* for FC0012 tuner probe */
-	struct rtl28xxu_req req_fc0012 = {0x00c6, CMD_I2C_RD, 1, buf};
-	/* for FC0013 tuner probe */
-	struct rtl28xxu_req req_fc0013 = {0x00c6, CMD_I2C_RD, 1, buf};
-	/* for MT2266 tuner probe */
-	struct rtl28xxu_req req_mt2266 = {0x00c0, CMD_I2C_RD, 1, buf};
-	/* for FC2580 tuner probe */
-	struct rtl28xxu_req req_fc2580 = {0x01ac, CMD_I2C_RD, 1, buf};
-	/* for MT2063 tuner probe */
-	struct rtl28xxu_req req_mt2063 = {0x00c0, CMD_I2C_RD, 1, buf};
-	/* for MAX3543 tuner probe */
-	struct rtl28xxu_req req_max3543 = {0x00c0, CMD_I2C_RD, 1, buf};
-	/* for TUA9001 tuner probe */
-	struct rtl28xxu_req req_tua9001 = {0x7ec0, CMD_I2C_RD, 2, buf};
-	/* for MXL5007T tuner probe */
-	struct rtl28xxu_req req_mxl5007t = {0xd9c0, CMD_I2C_RD, 1, buf};
-	/* for E4000 tuner probe */
-	struct rtl28xxu_req req_e4000 = {0x02c8, CMD_I2C_RD, 1, buf};
-	/* for TDA18272 tuner probe */
-	struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf};
-
-	deb_info("%s:\n", __func__);
-
-
-	ret = rtl28xx_rd_reg(adap->dev, SYS_GPIO_DIR, &val);
-	if (ret)
-		goto err;
-
-	val &= 0xbf;
-
-	ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_DIR, val);
-	if (ret)
-		goto err;
-
-
-	/* enable as output GPIO3 and GPIO6*/
-	ret = rtl28xx_rd_reg(adap->dev, SYS_GPIO_OUT_EN, &val);
-	if (ret)
-		goto err;
-
-	val |= 0x48;
-
-	ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_EN, val);
-	if (ret)
-		goto err;
-
-
-
-	/*
-	 * Probe used tuner. We need to know used tuner before demod attach
-	 * since there is some demod params needed to set according to tuner.
-	 */
-
-	/* open demod I2C gate */
-	ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_open);
-	if (ret)
-		goto err;
-
-	priv->tuner = TUNER_NONE;
-
-	/* check FC0012 ID register; reg=00 val=a1 */
-	ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc0012);
-	if (ret == 0 && buf[0] == 0xa1) {
-		priv->tuner = TUNER_RTL2832_FC0012;
-		rtl2832_config = &rtl28xxu_rtl2832_fc0012_config;
-		info("%s: FC0012 tuner found", __func__);
-		goto found;
-	}
-
-	/* check FC0013 ID register; reg=00 val=a3 */
-	ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc0013);
-	if (ret == 0 && buf[0] == 0xa3) {
-		priv->tuner = TUNER_RTL2832_FC0013;
-		rtl2832_config = &rtl28xxu_rtl2832_fc0013_config;
-		info("%s: FC0013 tuner found", __func__);
-		goto found;
-	}
-
-	/* check MT2266 ID register; reg=00 val=85 */
-	ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2266);
-	if (ret == 0 && buf[0] == 0x85) {
-		priv->tuner = TUNER_RTL2832_MT2266;
-		/* TODO implement tuner */
-		info("%s: MT2266 tuner found", __func__);
-		goto unsupported;
-	}
-
-	/* check FC2580 ID register; reg=01 val=56 */
-	ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc2580);
-	if (ret == 0 && buf[0] == 0x56) {
-		priv->tuner = TUNER_RTL2832_FC2580;
-		/* TODO implement tuner */
-		info("%s: FC2580 tuner found", __func__);
-		goto unsupported;
-	}
-
-	/* check MT2063 ID register; reg=00 val=9e || 9c */
-	ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2063);
-	if (ret == 0 && (buf[0] == 0x9e || buf[0] == 0x9c)) {
-		priv->tuner = TUNER_RTL2832_MT2063;
-		/* TODO implement tuner */
-		info("%s: MT2063 tuner found", __func__);
-		goto unsupported;
-	}
-
-	/* check MAX3543 ID register; reg=00 val=38 */
-	ret = rtl28xxu_ctrl_msg(adap->dev, &req_max3543);
-	if (ret == 0 && buf[0] == 0x38) {
-		priv->tuner = TUNER_RTL2832_MAX3543;
-		/* TODO implement tuner */
-		info("%s: MAX3534 tuner found", __func__);
-		goto unsupported;
-	}
-
-	/* check TUA9001 ID register; reg=7e val=2328 */
-	ret = rtl28xxu_ctrl_msg(adap->dev, &req_tua9001);
-	if (ret == 0 && buf[0] == 0x23 && buf[1] == 0x28) {
-		priv->tuner = TUNER_RTL2832_TUA9001;
-		/* TODO implement tuner */
-		info("%s: TUA9001 tuner found", __func__);
-		goto unsupported;
-	}
-
-	/* check MXL5007R ID register; reg=d9 val=14 */
-	ret = rtl28xxu_ctrl_msg(adap->dev, &req_mxl5007t);
-	if (ret == 0 && buf[0] == 0x14) {
-		priv->tuner = TUNER_RTL2832_MXL5007T;
-		/* TODO implement tuner */
-		info("%s: MXL5007T tuner found", __func__);
-		goto unsupported;
-	}
-
-	/* check E4000 ID register; reg=02 val=40 */
-	ret = rtl28xxu_ctrl_msg(adap->dev, &req_e4000);
-	if (ret == 0 && buf[0] == 0x40) {
-		priv->tuner = TUNER_RTL2832_E4000;
-		/* TODO implement tuner */
-		info("%s: E4000 tuner found", __func__);
-		goto unsupported;
-	}
-
-	/* check TDA18272 ID register; reg=00 val=c760  */
-	ret = rtl28xxu_ctrl_msg(adap->dev, &req_tda18272);
-	if (ret == 0 && (buf[0] == 0xc7 || buf[1] == 0x60)) {
-		priv->tuner = TUNER_RTL2832_TDA18272;
-		/* TODO implement tuner */
-		info("%s: TDA18272 tuner found", __func__);
-		goto unsupported;
-	}
-
-unsupported:
-	/* close demod I2C gate */
-	ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close);
-	if (ret)
-		goto err;
-
-	/* tuner not found */
-	deb_info("No compatible tuner found");
-	ret = -ENODEV;
-	return ret;
-
-found:
-	/* close demod I2C gate */
-	ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close);
-	if (ret)
-		goto err;
-
-	/* attach demodulator */
-	adap->fe_adap[0].fe = dvb_attach(rtl2832_attach, rtl2832_config,
-		&adap->dev->i2c_adap);
-		if (adap->fe_adap[0].fe == NULL) {
-			ret = -ENODEV;
-			goto err;
-		}
-
-	/* set fe callbacks */
-	adap->fe_adap[0].fe->callback = rtl2832u_frontend_callback;
-
-	return ret;
-
-err:
-	deb_info("%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static struct qt1010_config rtl28xxu_qt1010_config = {
-	.i2c_address = 0x62, /* 0xc4 */
-};
-
-static struct mt2060_config rtl28xxu_mt2060_config = {
-	.i2c_address = 0x60, /* 0xc0 */
-	.clock_out = 0,
-};
-
-static struct mxl5005s_config rtl28xxu_mxl5005s_config = {
-	.i2c_address     = 0x63, /* 0xc6 */
-	.if_freq         = IF_FREQ_4570000HZ,
-	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
-	.agc_mode        = MXL_SINGLE_AGC,
-	.tracking_filter = MXL_TF_C_H,
-	.rssi_enable     = MXL_RSSI_ENABLE,
-	.cap_select      = MXL_CAP_SEL_ENABLE,
-	.div_out         = MXL_DIV_OUT_4,
-	.clock_out       = MXL_CLOCK_OUT_DISABLE,
-	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
-	.top		 = MXL5005S_TOP_25P2,
-	.mod_mode        = MXL_DIGITAL_MODE,
-	.if_mode         = MXL_ZERO_IF,
-	.AgcMasterByte   = 0x00,
-};
-
-static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	int ret;
-	struct rtl28xxu_priv *priv = adap->dev->priv;
-	struct i2c_adapter *rtl2830_tuner_i2c;
-	struct dvb_frontend *fe;
-
-	deb_info("%s:\n", __func__);
-
-	/* use rtl2830 driver I2C adapter, for more info see rtl2830 driver */
-	rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe_adap[0].fe);
-
-	switch (priv->tuner) {
-	case TUNER_RTL2830_QT1010:
-		fe = dvb_attach(qt1010_attach, adap->fe_adap[0].fe,
-				rtl2830_tuner_i2c, &rtl28xxu_qt1010_config);
-		break;
-	case TUNER_RTL2830_MT2060:
-		fe = dvb_attach(mt2060_attach, adap->fe_adap[0].fe,
-				rtl2830_tuner_i2c, &rtl28xxu_mt2060_config,
-				1220);
-		break;
-	case TUNER_RTL2830_MXL5005S:
-		fe = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe,
-				rtl2830_tuner_i2c, &rtl28xxu_mxl5005s_config);
-		break;
-	default:
-		fe = NULL;
-		err("unknown tuner=%d", priv->tuner);
-	}
-
-	if (fe == NULL) {
-		ret = -ENODEV;
-		goto err;
-	}
-
-	return 0;
-err:
-	deb_info("%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	int ret;
-	struct rtl28xxu_priv *priv = adap->dev->priv;
-	struct dvb_frontend *fe;
-
-	deb_info("%s:\n", __func__);
-
-	switch (priv->tuner) {
-	case TUNER_RTL2832_FC0012:
-		fe = dvb_attach(fc0012_attach, adap->fe_adap[0].fe,
-			&adap->dev->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);
-
-		/* since fc0012 includs reading the signal strength delegate
-		 * that to the tuner driver */
-		adap->fe_adap[0].fe->ops.read_signal_strength = adap->fe_adap[0].
-				fe->ops.tuner_ops.get_rf_strength;
-		return 0;
-		break;
-	case TUNER_RTL2832_FC0013:
-		fe = dvb_attach(fc0013_attach, adap->fe_adap[0].fe,
-			&adap->dev->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);
-
-		/* fc0013 also supports signal strength reading */
-		adap->fe_adap[0].fe->ops.read_signal_strength = adap->fe_adap[0]
-			.fe->ops.tuner_ops.get_rf_strength;
-		return 0;
-	default:
-		fe = NULL;
-		err("unknown tuner=%d", priv->tuner);
-	}
-
-	if (fe == NULL) {
-		ret = -ENODEV;
-		goto err;
-	}
-
-	return 0;
-err:
-	deb_info("%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int rtl2831u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
-{
-	int ret;
-	u8 buf[2], gpio;
-
-	deb_info("%s: onoff=%d\n", __func__, onoff);
-
-	ret = rtl28xx_rd_reg(adap->dev, SYS_GPIO_OUT_VAL, &gpio);
-	if (ret)
-		goto err;
-
-	if (onoff) {
-		buf[0] = 0x00;
-		buf[1] = 0x00;
-		gpio |= 0x04; /* LED on */
-	} else {
-		buf[0] = 0x10; /* stall EPA */
-		buf[1] = 0x02; /* reset EPA */
-		gpio &= (~0x04); /* LED off */
-	}
-
-	ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_VAL, gpio);
-	if (ret)
-		goto err;
-
-	ret = rtl28xx_wr_regs(adap->dev, USB_EPA_CTL, buf, 2);
-	if (ret)
-		goto err;
-
-	return ret;
-err:
-	deb_info("%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int rtl2832u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
-{
-	int ret;
-	u8 buf[2];
-
-	deb_info("%s: onoff=%d\n", __func__, onoff);
-
-
-	if (onoff) {
-		buf[0] = 0x00;
-		buf[1] = 0x00;
-	} else {
-		buf[0] = 0x10; /* stall EPA */
-		buf[1] = 0x02; /* reset EPA */
-	}
-
-	ret = rtl28xx_wr_regs(adap->dev, USB_EPA_CTL, buf, 2);
-	if (ret)
-		goto err;
-
-	return ret;
-err:
-	deb_info("%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	int ret;
-	u8 gpio, sys0;
-
-	deb_info("%s: onoff=%d\n", __func__, onoff);
-
-	/* demod adc */
-	ret = rtl28xx_rd_reg(d, SYS_SYS0, &sys0);
-	if (ret)
-		goto err;
-
-	/* tuner power, read GPIOs */
-	ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &gpio);
-	if (ret)
-		goto err;
-
-	deb_info("%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio);
-
-	if (onoff) {
-		gpio |= 0x01; /* GPIO0 = 1 */
-		gpio &= (~0x10); /* GPIO4 = 0 */
-		sys0 = sys0 & 0x0f;
-		sys0 |= 0xe0;
-	} else {
-		gpio &= (~0x01); /* GPIO0 = 0 */
-		gpio |= 0x10; /* GPIO4 = 1 */
-		sys0 = sys0 & (~0xc0);
-	}
-
-	deb_info("%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio);
-
-	/* demod adc */
-	ret = rtl28xx_wr_reg(d, SYS_SYS0, sys0);
-	if (ret)
-		goto err;
-
-	/* tuner power, write GPIOs */
-	ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, gpio);
-	if (ret)
-		goto err;
-
-	return ret;
-err:
-	deb_info("%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	int ret;
-	u8 val;
-
-	deb_info("%s: onoff=%d\n", __func__, onoff);
-
-	if (onoff) {
-		/* set output values */
-		ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
-		if (ret)
-			goto err;
-
-		val |= 0x08;
-		val &= 0xef;
-
-		ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val);
-		if (ret)
-			goto err;
-
-		/* demod_ctl_1 */
-		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL1, &val);
-		if (ret)
-			goto err;
-
-		val &= 0xef;
-
-		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL1, val);
-		if (ret)
-			goto err;
-
-		/* demod control */
-		/* PLL enable */
-		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
-		if (ret)
-			goto err;
-
-		/* bit 7 to 1 */
-		val |= 0x80;
-
-		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
-		if (ret)
-			goto err;
-
-		/* demod HW reset */
-		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
-		if (ret)
-			goto err;
-		/* bit 5 to 0 */
-		val &= 0xdf;
-
-		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
-		if (ret)
-			goto err;
-
-		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
-		if (ret)
-			goto err;
-
-		val |= 0x20;
-
-		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
-		if (ret)
-			goto err;
-
-		mdelay(5);
-
-		/*enable ADC_Q and ADC_I */
-		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
-		if (ret)
-			goto err;
-
-		val |= 0x48;
-
-		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
-		if (ret)
-			goto err;
-
-
-	} else {
-		/* demod_ctl_1 */
-		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL1, &val);
-		if (ret)
-			goto err;
-
-		val |= 0x0c;
-
-		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL1, val);
-		if (ret)
-			goto err;
-
-		/* set output values */
-		ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
-		if (ret)
-				goto err;
-
-		val |= 0x10;
-
-		ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val);
-		if (ret)
-			goto err;
-
-		/* demod control */
-		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
-		if (ret)
-			goto err;
-
-		val &= 0x37;
-
-		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
-		if (ret)
-			goto err;
-
-	}
-
-	return ret;
-err:
-	deb_info("%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-
-static int rtl2831u_rc_query(struct dvb_usb_device *d)
-{
-	int ret, i;
-	struct rtl28xxu_priv *priv = d->priv;
-	u8 buf[5];
-	u32 rc_code;
-	struct rtl28xxu_reg_val rc_nec_tab[] = {
-		{ 0x3033, 0x80 },
-		{ 0x3020, 0x43 },
-		{ 0x3021, 0x16 },
-		{ 0x3022, 0x16 },
-		{ 0x3023, 0x5a },
-		{ 0x3024, 0x2d },
-		{ 0x3025, 0x16 },
-		{ 0x3026, 0x01 },
-		{ 0x3028, 0xb0 },
-		{ 0x3029, 0x04 },
-		{ 0x302c, 0x88 },
-		{ 0x302e, 0x13 },
-		{ 0x3030, 0xdf },
-		{ 0x3031, 0x05 },
-	};
-
-	/* init remote controller */
-	if (!priv->rc_active) {
-		for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) {
-			ret = rtl28xx_wr_reg(d, rc_nec_tab[i].reg,
-					rc_nec_tab[i].val);
-			if (ret)
-				goto err;
-		}
-		priv->rc_active = true;
-	}
-
-	ret = rtl2831_rd_regs(d, SYS_IRRC_RP, buf, 5);
-	if (ret)
-		goto err;
-
-	if (buf[4] & 0x01) {
-		if (buf[2] == (u8) ~buf[3]) {
-			if (buf[0] == (u8) ~buf[1]) {
-				/* NEC standard (16 bit) */
-				rc_code = buf[0] << 8 | buf[2];
-			} else {
-				/* NEC extended (24 bit) */
-				rc_code = buf[0] << 16 |
-						buf[1] << 8 | buf[2];
-			}
-		} else {
-			/* NEC full (32 bit) */
-			rc_code = buf[0] << 24 | buf[1] << 16 |
-					buf[2] << 8 | buf[3];
-		}
-
-		rc_keydown(d->rc_dev, rc_code, 0);
-
-		ret = rtl28xx_wr_reg(d, SYS_IRRC_SR, 1);
-		if (ret)
-			goto err;
-
-		/* repeated intentionally to avoid extra keypress */
-		ret = rtl28xx_wr_reg(d, SYS_IRRC_SR, 1);
-		if (ret)
-			goto err;
-	}
-
-	return ret;
-err:
-	deb_info("%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int rtl2832u_rc_query(struct dvb_usb_device *d)
-{
-	int ret, i;
-	struct rtl28xxu_priv *priv = d->priv;
-	u8 buf[128];
-	int len;
-	struct rtl28xxu_reg_val rc_nec_tab[] = {
-		{ IR_RX_CTRL,             0x20 },
-		{ IR_RX_BUF_CTRL,         0x80 },
-		{ IR_RX_IF,               0xff },
-		{ IR_RX_IE,               0xff },
-		{ IR_MAX_DURATION0,       0xd0 },
-		{ IR_MAX_DURATION1,       0x07 },
-		{ IR_IDLE_LEN0,           0xc0 },
-		{ IR_IDLE_LEN1,           0x00 },
-		{ IR_GLITCH_LEN,          0x03 },
-		{ IR_RX_CLK,              0x09 },
-		{ IR_RX_CFG,              0x1c },
-		{ IR_MAX_H_TOL_LEN,       0x1e },
-		{ IR_MAX_L_TOL_LEN,       0x1e },
-		{ IR_RX_CTRL,             0x80 },
-	};
-
-	/* init remote controller */
-	if (!priv->rc_active) {
-		for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) {
-			ret = rtl28xx_wr_reg(d, rc_nec_tab[i].reg,
-					rc_nec_tab[i].val);
-			if (ret)
-				goto err;
-		}
-		priv->rc_active = true;
-	}
-
-	ret = rtl28xx_rd_reg(d, IR_RX_IF, &buf[0]);
-	if (ret)
-		goto err;
-
-	if (buf[0] != 0x83)
-		goto exit;
-
-	ret = rtl28xx_rd_reg(d, IR_RX_BC, &buf[0]);
-	if (ret)
-		goto err;
-
-	len = buf[0];
-	ret = rtl2831_rd_regs(d, IR_RX_BUF, buf, len);
-
-	/* TODO: pass raw IR to Kernel IR decoder */
-
-	ret = rtl28xx_wr_reg(d, IR_RX_IF, 0x03);
-	ret = rtl28xx_wr_reg(d, IR_RX_BUF_CTRL, 0x80);
-	ret = rtl28xx_wr_reg(d, IR_RX_CTRL, 0x80);
-
-exit:
-	return ret;
-err:
-	deb_info("%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-enum rtl28xxu_usb_table_entry {
-	RTL2831U_0BDA_2831,
-	RTL2831U_14AA_0160,
-	RTL2831U_14AA_0161,
-	RTL2832U_0CCD_00A9,
-	RTL2832U_1F4D_B803,
-	RTL2832U_0CCD_00B3,
-};
-
-static struct usb_device_id rtl28xxu_table[] = {
-	/* RTL2831U */
-	[RTL2831U_0BDA_2831] = {
-		USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U)},
-	[RTL2831U_14AA_0160] = {
-		USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT)},
-	[RTL2831U_14AA_0161] = {
-		USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2)},
-
-	/* RTL2832U */
-	[RTL2832U_0CCD_00A9] = {
-		USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1)},
-	[RTL2832U_1F4D_B803] = {
-		USB_DEVICE(USB_VID_GTEK, USB_PID_DELOCK_USB2_DVBT)},
-	[RTL2832U_0CCD_00B3] = {
-		USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK)},
-	{} /* terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, rtl28xxu_table);
-
-static struct dvb_usb_device_properties rtl28xxu_properties[] = {
-	{
-		.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-		.usb_ctrl = DEVICE_SPECIFIC,
-		.no_reconnect = 1,
-
-		.size_of_priv = sizeof(struct rtl28xxu_priv),
-
-		.num_adapters = 1,
-		.adapter = {
-			{
-				.num_frontends = 1,
-				.fe = {
-					{
-						.frontend_attach = rtl2831u_frontend_attach,
-						.tuner_attach    = rtl2831u_tuner_attach,
-						.streaming_ctrl  = rtl2831u_streaming_ctrl,
-						.stream = {
-							.type = USB_BULK,
-							.count = 6,
-							.endpoint = 0x81,
-							.u = {
-								.bulk = {
-									.buffersize = 8*512,
-								}
-							}
-						}
-					}
-				}
-			}
-		},
-
-		.power_ctrl = rtl2831u_power_ctrl,
-
-		.rc.core = {
-			.protocol       = RC_TYPE_NEC,
-			.module_name    = "rtl28xxu",
-			.rc_query       = rtl2831u_rc_query,
-			.rc_interval    = 400,
-			.allowed_protos = RC_TYPE_NEC,
-			.rc_codes       = RC_MAP_EMPTY,
-		},
-
-		.i2c_algo = &rtl28xxu_i2c_algo,
-
-		.num_device_descs = 2,
-		.devices = {
-			{
-				.name = "Realtek RTL2831U reference design",
-				.warm_ids = {
-					&rtl28xxu_table[RTL2831U_0BDA_2831],
-				},
-			},
-			{
-				.name = "Freecom USB2.0 DVB-T",
-				.warm_ids = {
-					&rtl28xxu_table[RTL2831U_14AA_0160],
-					&rtl28xxu_table[RTL2831U_14AA_0161],
-				},
-			},
-		}
-	},
-	{
-		.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-		.usb_ctrl = DEVICE_SPECIFIC,
-		.no_reconnect = 1,
-
-		.size_of_priv = sizeof(struct rtl28xxu_priv),
-
-		.num_adapters = 1,
-		.adapter = {
-			{
-				.num_frontends = 1,
-				.fe = {
-					{
-						.frontend_attach = rtl2832u_frontend_attach,
-						.tuner_attach    = rtl2832u_tuner_attach,
-						.streaming_ctrl  = rtl2832u_streaming_ctrl,
-						.stream = {
-							.type = USB_BULK,
-							.count = 6,
-							.endpoint = 0x81,
-							.u = {
-								.bulk = {
-									.buffersize = 8*512,
-								}
-							}
-						}
-					}
-				}
-			}
-		},
-
-		.power_ctrl = rtl2832u_power_ctrl,
-
-		.rc.core = {
-			.protocol       = RC_TYPE_NEC,
-			.module_name    = "rtl28xxu",
-			.rc_query       = rtl2832u_rc_query,
-			.rc_interval    = 400,
-			.allowed_protos = RC_TYPE_NEC,
-			.rc_codes       = RC_MAP_EMPTY,
-		},
-
-		.i2c_algo = &rtl28xxu_i2c_algo,
-
-		.num_device_descs = 3,
-		.devices = {
-			{
-				.name = "Terratec Cinergy T Stick Black",
-				.warm_ids = {
-					&rtl28xxu_table[RTL2832U_0CCD_00A9],
-				},
-			},
-			{
-				.name = "G-Tek Electronics Group Lifeview LV5TDLX DVB-T",
-				.warm_ids = {
-					&rtl28xxu_table[RTL2832U_1F4D_B803],
-				},
-			},
-			{
-				.name = "NOXON DAB/DAB+ USB dongle",
-				.warm_ids = {
-					&rtl28xxu_table[RTL2832U_0CCD_00B3],
-				},
-			},
-		}
-	},
-
-};
-
-static int rtl28xxu_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	int ret, i;
-	u8 val;
-	int properties_count = ARRAY_SIZE(rtl28xxu_properties);
-	struct dvb_usb_device *d;
-	struct usb_device *udev;
-	bool found;
-
-	deb_info("%s: interface=%d\n", __func__,
-		intf->cur_altsetting->desc.bInterfaceNumber);
-
-	if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
-		return 0;
-
-	/* Dynamic USB ID support. Replaces first device ID with current one .*/
-	udev = interface_to_usbdev(intf);
-
-	for (i = 0, found = false; i < ARRAY_SIZE(rtl28xxu_table) - 1; i++) {
-		if (rtl28xxu_table[i].idVendor ==
-				le16_to_cpu(udev->descriptor.idVendor) &&
-				rtl28xxu_table[i].idProduct ==
-				le16_to_cpu(udev->descriptor.idProduct)) {
-			found = true;
-			break;
-		}
-	}
-
-	if (!found) {
-		deb_info("%s: using dynamic ID %04x:%04x\n", __func__,
-				le16_to_cpu(udev->descriptor.idVendor),
-				le16_to_cpu(udev->descriptor.idProduct));
-		rtl28xxu_properties[0].devices[0].warm_ids[0]->idVendor =
-				le16_to_cpu(udev->descriptor.idVendor);
-		rtl28xxu_properties[0].devices[0].warm_ids[0]->idProduct =
-				le16_to_cpu(udev->descriptor.idProduct);
-	}
-
-	for (i = 0; i < properties_count; i++) {
-		ret = dvb_usb_device_init(intf, &rtl28xxu_properties[i],
-				THIS_MODULE, &d, adapter_nr);
-		if (ret == 0 || ret != -ENODEV)
-			break;
-	}
-
-	if (ret)
-		goto err;
-
-
-	/* init USB endpoints */
-	ret = rtl28xx_rd_reg(d, USB_SYSCTL_0, &val);
-	if (ret)
-			goto err;
-
-	/* enable DMA and Full Packet Mode*/
-	val |= 0x09;
-	ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val);
-	if (ret)
-		goto err;
-
-	/* set EPA maximum packet size to 0x0200 */
-	ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4);
-	if (ret)
-		goto err;
-
-	/* change EPA FIFO length */
-	ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4);
-	if (ret)
-		goto err;
-
-	return ret;
-err:
-	deb_info("%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static struct usb_driver rtl28xxu_driver = {
-	.name       = "dvb_usb_rtl28xxu",
-	.probe      = rtl28xxu_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table   = rtl28xxu_table,
-};
-
-/* module stuff */
-static int __init rtl28xxu_module_init(void)
-{
-	int ret;
-
-	deb_info("%s:\n", __func__);
-
-	ret = usb_register(&rtl28xxu_driver);
-	if (ret)
-		err("usb_register failed=%d", ret);
-
-	return ret;
-}
-
-static void __exit rtl28xxu_module_exit(void)
-{
-	deb_info("%s:\n", __func__);
-
-	/* deregister this driver from the USB subsystem */
-	usb_deregister(&rtl28xxu_driver);
-}
-
-module_init(rtl28xxu_module_init);
-module_exit(rtl28xxu_module_exit);
-
-MODULE_DESCRIPTION("Realtek RTL28xxU DVB USB driver");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_AUTHOR("Thomas Mair <thomas.mair86@googlemail.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.h b/drivers/media/dvb/dvb-usb/rtl28xxu.h
deleted file mode 100644
index 90f3bb4..0000000
--- a/drivers/media/dvb/dvb-usb/rtl28xxu.h
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * Realtek RTL28xxU DVB USB driver
- *
- * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
- * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef RTL28XXU_H
-#define RTL28XXU_H
-
-#define DVB_USB_LOG_PREFIX "rtl28xxu"
-#include "dvb-usb.h"
-
-#define deb_info(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x01, args)
-#define deb_rc(args...)   dprintk(dvb_usb_rtl28xxu_debug, 0x02, args)
-#define deb_xfer(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x04, args)
-#define deb_reg(args...)  dprintk(dvb_usb_rtl28xxu_debug, 0x08, args)
-#define deb_i2c(args...)  dprintk(dvb_usb_rtl28xxu_debug, 0x10, args)
-#define deb_fw(args...)   dprintk(dvb_usb_rtl28xxu_debug, 0x20, args)
-
-#define deb_dump(r, t, v, i, b, l, func) { \
-	int loop_; \
-	func("%02x %02x %02x %02x %02x %02x %02x %02x", \
-		t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, l & 0xff, l >> 8); \
-	if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \
-		func(" >>> "); \
-	else \
-		func(" <<< "); \
-	for (loop_ = 0; loop_ < l; loop_++) \
-		func("%02x ", b[loop_]); \
-	func("\n");\
-}
-
-/*
- * USB commands
- * (usb_control_msg() index parameter)
- */
-
-#define DEMOD            0x0000
-#define USB              0x0100
-#define SYS              0x0200
-#define I2C              0x0300
-#define I2C_DA           0x0600
-
-#define CMD_WR_FLAG      0x0010
-#define CMD_DEMOD_RD     0x0000
-#define CMD_DEMOD_WR     0x0010
-#define CMD_USB_RD       0x0100
-#define CMD_USB_WR       0x0110
-#define CMD_SYS_RD       0x0200
-#define CMD_IR_RD        0x0201
-#define CMD_IR_WR        0x0211
-#define CMD_SYS_WR       0x0210
-#define CMD_I2C_RD       0x0300
-#define CMD_I2C_WR       0x0310
-#define CMD_I2C_DA_RD    0x0600
-#define CMD_I2C_DA_WR    0x0610
-
-
-struct rtl28xxu_priv {
-	u8 chip_id;
-	u8 tuner;
-	u8 page; /* integrated demod active register page */
-	bool rc_active;
-};
-
-enum rtl28xxu_chip_id {
-	CHIP_ID_NONE,
-	CHIP_ID_RTL2831U,
-	CHIP_ID_RTL2832U,
-};
-
-enum rtl28xxu_tuner {
-	TUNER_NONE,
-
-	TUNER_RTL2830_QT1010,
-	TUNER_RTL2830_MT2060,
-	TUNER_RTL2830_MXL5005S,
-
-	TUNER_RTL2832_MT2266,
-	TUNER_RTL2832_FC2580,
-	TUNER_RTL2832_MT2063,
-	TUNER_RTL2832_MAX3543,
-	TUNER_RTL2832_TUA9001,
-	TUNER_RTL2832_MXL5007T,
-	TUNER_RTL2832_FC0012,
-	TUNER_RTL2832_E4000,
-	TUNER_RTL2832_TDA18272,
-	TUNER_RTL2832_FC0013,
-};
-
-struct rtl28xxu_req {
-	u16 value;
-	u16 index;
-	u16 size;
-	u8 *data;
-};
-
-struct rtl28xxu_reg_val {
-	u16 reg;
-	u8 val;
-};
-
-/*
- * memory map
- *
- * 0x0000 DEMOD : demodulator
- * 0x2000 USB   : SIE, USB endpoint, debug, DMA
- * 0x3000 SYS   : system
- * 0xfc00 RC    : remote controller (not RTL2831U)
- */
-
-/*
- * USB registers
- */
-/* SIE Control Registers */
-#define USB_SYSCTL         0x2000 /* USB system control */
-#define USB_SYSCTL_0       0x2000 /* USB system control */
-#define USB_SYSCTL_1       0x2001 /* USB system control */
-#define USB_SYSCTL_2       0x2002 /* USB system control */
-#define USB_SYSCTL_3       0x2003 /* USB system control */
-#define USB_IRQSTAT        0x2008 /* SIE interrupt status */
-#define USB_IRQEN          0x200C /* SIE interrupt enable */
-#define USB_CTRL           0x2010 /* USB control */
-#define USB_STAT           0x2014 /* USB status */
-#define USB_DEVADDR        0x2018 /* USB device address */
-#define USB_TEST           0x201C /* USB test mode */
-#define USB_FRAME_NUMBER   0x2020 /* frame number */
-#define USB_FIFO_ADDR      0x2028 /* address of SIE FIFO RAM */
-#define USB_FIFO_CMD       0x202A /* SIE FIFO RAM access command */
-#define USB_FIFO_DATA      0x2030 /* SIE FIFO RAM data */
-/* Endpoint Registers */
-#define EP0_SETUPA         0x20F8 /* EP 0 setup packet lower byte */
-#define EP0_SETUPB         0x20FC /* EP 0 setup packet higher byte */
-#define USB_EP0_CFG        0x2104 /* EP 0 configure */
-#define USB_EP0_CTL        0x2108 /* EP 0 control */
-#define USB_EP0_STAT       0x210C /* EP 0 status */
-#define USB_EP0_IRQSTAT    0x2110 /* EP 0 interrupt status */
-#define USB_EP0_IRQEN      0x2114 /* EP 0 interrupt enable */
-#define USB_EP0_MAXPKT     0x2118 /* EP 0 max packet size */
-#define USB_EP0_BC         0x2120 /* EP 0 FIFO byte counter */
-#define USB_EPA_CFG        0x2144 /* EP A configure */
-#define USB_EPA_CFG_0      0x2144 /* EP A configure */
-#define USB_EPA_CFG_1      0x2145 /* EP A configure */
-#define USB_EPA_CFG_2      0x2146 /* EP A configure */
-#define USB_EPA_CFG_3      0x2147 /* EP A configure */
-#define USB_EPA_CTL        0x2148 /* EP A control */
-#define USB_EPA_CTL_0      0x2148 /* EP A control */
-#define USB_EPA_CTL_1      0x2149 /* EP A control */
-#define USB_EPA_CTL_2      0x214A /* EP A control */
-#define USB_EPA_CTL_3      0x214B /* EP A control */
-#define USB_EPA_STAT       0x214C /* EP A status */
-#define USB_EPA_IRQSTAT    0x2150 /* EP A interrupt status */
-#define USB_EPA_IRQEN      0x2154 /* EP A interrupt enable */
-#define USB_EPA_MAXPKT     0x2158 /* EP A max packet size */
-#define USB_EPA_MAXPKT_0   0x2158 /* EP A max packet size */
-#define USB_EPA_MAXPKT_1   0x2159 /* EP A max packet size */
-#define USB_EPA_MAXPKT_2   0x215A /* EP A max packet size */
-#define USB_EPA_MAXPKT_3   0x215B /* EP A max packet size */
-#define USB_EPA_FIFO_CFG   0x2160 /* EP A FIFO configure */
-#define USB_EPA_FIFO_CFG_0 0x2160 /* EP A FIFO configure */
-#define USB_EPA_FIFO_CFG_1 0x2161 /* EP A FIFO configure */
-#define USB_EPA_FIFO_CFG_2 0x2162 /* EP A FIFO configure */
-#define USB_EPA_FIFO_CFG_3 0x2163 /* EP A FIFO configure */
-/* Debug Registers */
-#define USB_PHYTSTDIS      0x2F04 /* PHY test disable */
-#define USB_TOUT_VAL       0x2F08 /* USB time-out time */
-#define USB_VDRCTRL        0x2F10 /* UTMI vendor signal control */
-#define USB_VSTAIN         0x2F14 /* UTMI vendor signal status in */
-#define USB_VLOADM         0x2F18 /* UTMI load vendor signal status in */
-#define USB_VSTAOUT        0x2F1C /* UTMI vendor signal status out */
-#define USB_UTMI_TST       0x2F80 /* UTMI test */
-#define USB_UTMI_STATUS    0x2F84 /* UTMI status */
-#define USB_TSTCTL         0x2F88 /* test control */
-#define USB_TSTCTL2        0x2F8C /* test control 2 */
-#define USB_PID_FORCE      0x2F90 /* force PID */
-#define USB_PKTERR_CNT     0x2F94 /* packet error counter */
-#define USB_RXERR_CNT      0x2F98 /* RX error counter */
-#define USB_MEM_BIST       0x2F9C /* MEM BIST test */
-#define USB_SLBBIST        0x2FA0 /* self-loop-back BIST */
-#define USB_CNTTEST        0x2FA4 /* counter test */
-#define USB_PHYTST         0x2FC0 /* USB PHY test */
-#define USB_DBGIDX         0x2FF0 /* select individual block debug signal */
-#define USB_DBGMUX         0x2FF4 /* debug signal module mux */
-
-/*
- * SYS registers
- */
-/* demod control registers */
-#define SYS_SYS0           0x3000 /* include DEMOD_CTL, GPO, GPI, GPOE */
-#define SYS_DEMOD_CTL      0x3000 /* control register for DVB-T demodulator */
-/* GPIO registers */
-#define SYS_GPIO_OUT_VAL   0x3001 /* output value of GPIO */
-#define SYS_GPIO_IN_VAL    0x3002 /* input value of GPIO */
-#define SYS_GPIO_OUT_EN    0x3003 /* output enable of GPIO */
-#define SYS_SYS1           0x3004 /* include GPD, SYSINTE, SYSINTS, GP_CFG0 */
-#define SYS_GPIO_DIR       0x3004 /* direction control for GPIO */
-#define SYS_SYSINTE        0x3005 /* system interrupt enable */
-#define SYS_SYSINTS        0x3006 /* system interrupt status */
-#define SYS_GPIO_CFG0      0x3007 /* PAD configuration for GPIO0-GPIO3 */
-#define SYS_SYS2           0x3008 /* include GP_CFG1 and 3 reserved bytes */
-#define SYS_GPIO_CFG1      0x3008 /* PAD configuration for GPIO4 */
-#define SYS_DEMOD_CTL1     0x300B
-
-/* IrDA registers */
-#define SYS_IRRC_PSR       0x3020 /* IR protocol selection */
-#define SYS_IRRC_PER       0x3024 /* IR protocol extension */
-#define SYS_IRRC_SF        0x3028 /* IR sampling frequency */
-#define SYS_IRRC_DPIR      0x302C /* IR data package interval */
-#define SYS_IRRC_CR        0x3030 /* IR control */
-#define SYS_IRRC_RP        0x3034 /* IR read port */
-#define SYS_IRRC_SR        0x3038 /* IR status */
-/* I2C master registers */
-#define SYS_I2CCR          0x3040 /* I2C clock */
-#define SYS_I2CMCR         0x3044 /* I2C master control */
-#define SYS_I2CMSTR        0x3048 /* I2C master SCL timing */
-#define SYS_I2CMSR         0x304C /* I2C master status */
-#define SYS_I2CMFR         0x3050 /* I2C master FIFO */
-
-/*
- * IR registers
- */
-#define IR_RX_BUF          0xFC00
-#define IR_RX_IE           0xFD00
-#define IR_RX_IF           0xFD01
-#define IR_RX_CTRL         0xFD02
-#define IR_RX_CFG          0xFD03
-#define IR_MAX_DURATION0   0xFD04
-#define IR_MAX_DURATION1   0xFD05
-#define IR_IDLE_LEN0       0xFD06
-#define IR_IDLE_LEN1       0xFD07
-#define IR_GLITCH_LEN      0xFD08
-#define IR_RX_BUF_CTRL     0xFD09
-#define IR_RX_BUF_DATA     0xFD0A
-#define IR_RX_BC           0xFD0B
-#define IR_RX_CLK          0xFD0C
-#define IR_RX_C_COUNT_L    0xFD0D
-#define IR_RX_C_COUNT_H    0xFD0E
-#define IR_SUSPEND_CTRL    0xFD10
-#define IR_ERR_TOL_CTRL    0xFD11
-#define IR_UNIT_LEN        0xFD12
-#define IR_ERR_TOL_LEN     0xFD13
-#define IR_MAX_H_TOL_LEN   0xFD14
-#define IR_MAX_L_TOL_LEN   0xFD15
-#define IR_MASK_CTRL       0xFD16
-#define IR_MASK_DATA       0xFD17
-#define IR_RES_MASK_ADDR   0xFD18
-#define IR_RES_MASK_T_LEN  0xFD19
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/technisat-usb2.c b/drivers/media/dvb/dvb-usb/technisat-usb2.c
deleted file mode 100644
index acefaa8..0000000
--- a/drivers/media/dvb/dvb-usb/technisat-usb2.c
+++ /dev/null
@@ -1,789 +0,0 @@
-/*
- * Linux driver for Technisat DVB-S/S2 USB 2.0 device
- *
- * Copyright (C) 2010 Patrick Boettcher,
- *                    Kernel Labs Inc. PO Box 745, St James, NY 11780
- *
- * Development was sponsored by Technisat Digital UK Limited, whose
- * registered office is Witan Gate House 500 - 600 Witan Gate West,
- * Milton Keynes, MK9 1SH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * THIS PROGRAM IS PROVIDED "AS IS" AND BOTH THE COPYRIGHT HOLDER AND
- * TECHNISAT DIGITAL UK LTD DISCLAIM ALL WARRANTIES WITH REGARD TO
- * THIS PROGRAM INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR
- * FITNESS FOR A PARTICULAR PURPOSE.  NEITHER THE COPYRIGHT HOLDER
- * NOR TECHNISAT DIGITAL UK LIMITED SHALL BE LIABLE FOR ANY SPECIAL,
- * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
- * RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR
- * IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS PROGRAM. See the
- * GNU General Public License for more details.
- */
-
-#define DVB_USB_LOG_PREFIX "technisat-usb2"
-#include "dvb-usb.h"
-
-#include "stv6110x.h"
-#include "stv090x.h"
-
-/* module parameters */
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug,
-		"set debugging level (bit-mask: 1=info,2=eeprom,4=i2c,8=rc)." \
-		DVB_USB_DEBUG_STATUS);
-
-/* disables all LED control command and
- * also does not start the signal polling thread */
-static int disable_led_control;
-module_param(disable_led_control, int, 0444);
-MODULE_PARM_DESC(disable_led_control,
-		"disable LED control of the device "
-		"(default: 0 - LED control is active).");
-
-/* device private data */
-struct technisat_usb2_state {
-	struct dvb_usb_device *dev;
-	struct delayed_work green_led_work;
-	u8 power_state;
-
-	u16 last_scan_code;
-};
-
-/* debug print helpers */
-#define deb_info(args...)    dprintk(debug, 0x01, args)
-#define deb_eeprom(args...)  dprintk(debug, 0x02, args)
-#define deb_i2c(args...)     dprintk(debug, 0x04, args)
-#define deb_rc(args...)      dprintk(debug, 0x08, args)
-
-/* vendor requests */
-#define SET_IFCLK_TO_EXTERNAL_TSCLK_VENDOR_REQUEST 0xB3
-#define SET_FRONT_END_RESET_VENDOR_REQUEST         0xB4
-#define GET_VERSION_INFO_VENDOR_REQUEST            0xB5
-#define SET_GREEN_LED_VENDOR_REQUEST               0xB6
-#define SET_RED_LED_VENDOR_REQUEST                 0xB7
-#define GET_IR_DATA_VENDOR_REQUEST                 0xB8
-#define SET_LED_TIMER_DIVIDER_VENDOR_REQUEST       0xB9
-#define SET_USB_REENUMERATION                      0xBA
-
-/* i2c-access methods */
-#define I2C_SPEED_100KHZ_BIT 0x40
-
-#define I2C_STATUS_NAK 7
-#define I2C_STATUS_OK 8
-
-static int technisat_usb2_i2c_access(struct usb_device *udev,
-		u8 device_addr, u8 *tx, u8 txlen, u8 *rx, u8 rxlen)
-{
-	u8 b[64];
-	int ret, actual_length;
-
-	deb_i2c("i2c-access: %02x, tx: ", device_addr);
-	debug_dump(tx, txlen, deb_i2c);
-	deb_i2c(" ");
-
-	if (txlen > 62) {
-		err("i2c TX buffer can't exceed 62 bytes (dev 0x%02x)",
-				device_addr);
-		txlen = 62;
-	}
-	if (rxlen > 62) {
-		err("i2c RX buffer can't exceed 62 bytes (dev 0x%02x)",
-				device_addr);
-		txlen = 62;
-	}
-
-	b[0] = I2C_SPEED_100KHZ_BIT;
-	b[1] = device_addr << 1;
-
-	if (rx != NULL) {
-		b[0] |= rxlen;
-		b[1] |= 1;
-	}
-
-	memcpy(&b[2], tx, txlen);
-	ret = usb_bulk_msg(udev,
-			usb_sndbulkpipe(udev, 0x01),
-			b, 2 + txlen,
-			NULL, 1000);
-
-	if (ret < 0) {
-		err("i2c-error: out failed %02x = %d", device_addr, ret);
-		return -ENODEV;
-	}
-
-	ret = usb_bulk_msg(udev,
-			usb_rcvbulkpipe(udev, 0x01),
-			b, 64, &actual_length, 1000);
-	if (ret < 0) {
-		err("i2c-error: in failed %02x = %d", device_addr, ret);
-		return -ENODEV;
-	}
-
-	if (b[0] != I2C_STATUS_OK) {
-		err("i2c-error: %02x = %d", device_addr, b[0]);
-		/* handle tuner-i2c-nak */
-		if (!(b[0] == I2C_STATUS_NAK &&
-				device_addr == 0x60
-				/* && device_is_technisat_usb2 */))
-			return -ENODEV;
-	}
-
-	deb_i2c("status: %d, ", b[0]);
-
-	if (rx != NULL) {
-		memcpy(rx, &b[2], rxlen);
-
-		deb_i2c("rx (%d): ", rxlen);
-		debug_dump(rx, rxlen, deb_i2c);
-	}
-
-	deb_i2c("\n");
-
-	return 0;
-}
-
-static int technisat_usb2_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
-				int num)
-{
-	int ret = 0, i;
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-
-	/* Ensure nobody else hits the i2c bus while we're sending our
-	   sequence of messages, (such as the remote control thread) */
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	for (i = 0; i < num; i++) {
-		if (i+1 < num && msg[i+1].flags & I2C_M_RD) {
-			ret = technisat_usb2_i2c_access(d->udev, msg[i+1].addr,
-						msg[i].buf, msg[i].len,
-						msg[i+1].buf, msg[i+1].len);
-			if (ret != 0)
-				break;
-			i++;
-		} else {
-			ret = technisat_usb2_i2c_access(d->udev, msg[i].addr,
-						msg[i].buf, msg[i].len,
-						NULL, 0);
-			if (ret != 0)
-				break;
-		}
-	}
-
-	if (ret == 0)
-		ret = i;
-
-	mutex_unlock(&d->i2c_mutex);
-
-	return ret;
-}
-
-static u32 technisat_usb2_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm technisat_usb2_i2c_algo = {
-	.master_xfer   = technisat_usb2_i2c_xfer,
-	.functionality = technisat_usb2_i2c_func,
-};
-
-#if 0
-static void technisat_usb2_frontend_reset(struct usb_device *udev)
-{
-	usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-			SET_FRONT_END_RESET_VENDOR_REQUEST,
-			USB_TYPE_VENDOR | USB_DIR_OUT,
-			10, 0,
-			NULL, 0, 500);
-}
-#endif
-
-/* LED control */
-enum technisat_usb2_led_state {
-	LED_OFF,
-	LED_BLINK,
-	LED_ON,
-	LED_UNDEFINED
-};
-
-static int technisat_usb2_set_led(struct dvb_usb_device *d, int red, enum technisat_usb2_led_state state)
-{
-	int ret;
-
-	u8 led[8] = {
-		red ? SET_RED_LED_VENDOR_REQUEST : SET_GREEN_LED_VENDOR_REQUEST,
-		0
-	};
-
-	if (disable_led_control && state != LED_OFF)
-		return 0;
-
-	switch (state) {
-	case LED_ON:
-		led[1] = 0x82;
-		break;
-	case LED_BLINK:
-		led[1] = 0x82;
-		if (red) {
-			led[2] = 0x02;
-			led[3] = 10;
-			led[4] = 10;
-		} else {
-			led[2] = 0xff;
-			led[3] = 50;
-			led[4] = 50;
-		}
-		led[5] = 1;
-		break;
-
-	default:
-	case LED_OFF:
-		led[1] = 0x80;
-		break;
-	}
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
-		red ? SET_RED_LED_VENDOR_REQUEST : SET_GREEN_LED_VENDOR_REQUEST,
-		USB_TYPE_VENDOR | USB_DIR_OUT,
-		0, 0,
-		led, sizeof(led), 500);
-
-	mutex_unlock(&d->i2c_mutex);
-	return ret;
-}
-
-static int technisat_usb2_set_led_timer(struct dvb_usb_device *d, u8 red, u8 green)
-{
-	int ret;
-	u8 b = 0;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
-		SET_LED_TIMER_DIVIDER_VENDOR_REQUEST,
-		USB_TYPE_VENDOR | USB_DIR_OUT,
-		(red << 8) | green, 0,
-		&b, 1, 500);
-
-	mutex_unlock(&d->i2c_mutex);
-
-	return ret;
-}
-
-static void technisat_usb2_green_led_control(struct work_struct *work)
-{
-	struct technisat_usb2_state *state =
-		container_of(work, struct technisat_usb2_state, green_led_work.work);
-	struct dvb_frontend *fe = state->dev->adapter[0].fe_adap[0].fe;
-
-	if (state->power_state == 0)
-		goto schedule;
-
-	if (fe != NULL) {
-		enum fe_status status;
-
-		if (fe->ops.read_status(fe, &status) != 0)
-			goto schedule;
-
-		if (status & FE_HAS_LOCK) {
-			u32 ber;
-
-			if (fe->ops.read_ber(fe, &ber) != 0)
-				goto schedule;
-
-			if (ber > 1000)
-				technisat_usb2_set_led(state->dev, 0, LED_BLINK);
-			else
-				technisat_usb2_set_led(state->dev, 0, LED_ON);
-		} else
-			technisat_usb2_set_led(state->dev, 0, LED_OFF);
-	}
-
-schedule:
-	schedule_delayed_work(&state->green_led_work,
-			msecs_to_jiffies(500));
-}
-
-/* method to find out whether the firmware has to be downloaded or not */
-static int technisat_usb2_identify_state(struct usb_device *udev,
-		struct dvb_usb_device_properties *props,
-		struct dvb_usb_device_description **desc, int *cold)
-{
-	int ret;
-	u8 version[3];
-
-	/* first select the interface */
-	if (usb_set_interface(udev, 0, 1) != 0)
-		err("could not set alternate setting to 0");
-	else
-		info("set alternate setting");
-
-	*cold = 0; /* by default do not download a firmware - just in case something is wrong */
-
-	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-		GET_VERSION_INFO_VENDOR_REQUEST,
-		USB_TYPE_VENDOR | USB_DIR_IN,
-		0, 0,
-		version, sizeof(version), 500);
-
-	if (ret < 0)
-		*cold = 1;
-	else {
-		info("firmware version: %d.%d", version[1], version[2]);
-		*cold = 0;
-	}
-
-	return 0;
-}
-
-/* power control */
-static int technisat_usb2_power_ctrl(struct dvb_usb_device *d, int level)
-{
-	struct technisat_usb2_state *state = d->priv;
-
-	state->power_state = level;
-
-	if (disable_led_control)
-		return 0;
-
-	/* green led is turned off in any case - will be turned on when tuning */
-	technisat_usb2_set_led(d, 0, LED_OFF);
-	/* red led is turned on all the time */
-	technisat_usb2_set_led(d, 1, LED_ON);
-	return 0;
-}
-
-/* mac address reading - from the eeprom */
-#if 0
-static void technisat_usb2_eeprom_dump(struct dvb_usb_device *d)
-{
-	u8 reg;
-	u8 b[16];
-	int i, j;
-
-	/* full EEPROM dump */
-	for (j = 0; j < 256 * 4; j += 16) {
-		reg = j;
-		if (technisat_usb2_i2c_access(d->udev, 0x50 + j / 256, &reg, 1, b, 16) != 0)
-			break;
-
-		deb_eeprom("EEPROM: %01x%02x: ", j / 256, reg);
-		for (i = 0; i < 16; i++)
-			deb_eeprom("%02x ", b[i]);
-		deb_eeprom("\n");
-	}
-}
-#endif
-
-static u8 technisat_usb2_calc_lrc(const u8 *b, u16 length)
-{
-	u8 lrc = 0;
-	while (--length)
-		lrc ^= *b++;
-	return lrc;
-}
-
-static int technisat_usb2_eeprom_lrc_read(struct dvb_usb_device *d,
-	u16 offset, u8 *b, u16 length, u8 tries)
-{
-	u8 bo = offset & 0xff;
-	struct i2c_msg msg[] = {
-		{
-			.addr = 0x50 | ((offset >> 8) & 0x3),
-			.buf = &bo,
-			.len = 1
-		}, {
-			.addr = 0x50 | ((offset >> 8) & 0x3),
-			.flags	= I2C_M_RD,
-			.buf = b,
-			.len = length
-		}
-	};
-
-	while (tries--) {
-		int status;
-
-		if (i2c_transfer(&d->i2c_adap, msg, 2) != 2)
-			break;
-
-		status =
-			technisat_usb2_calc_lrc(b, length - 1) == b[length - 1];
-
-		if (status)
-			return 0;
-	}
-
-	return -EREMOTEIO;
-}
-
-#define EEPROM_MAC_START 0x3f8
-#define EEPROM_MAC_TOTAL 8
-static int technisat_usb2_read_mac_address(struct dvb_usb_device *d,
-		u8 mac[])
-{
-	u8 buf[EEPROM_MAC_TOTAL];
-
-	if (technisat_usb2_eeprom_lrc_read(d, EEPROM_MAC_START,
-				buf, EEPROM_MAC_TOTAL, 4) != 0)
-		return -ENODEV;
-
-	memcpy(mac, buf, 6);
-	return 0;
-}
-
-/* frontend attach */
-static int technisat_usb2_set_voltage(struct dvb_frontend *fe,
-		fe_sec_voltage_t voltage)
-{
-	int i;
-	u8 gpio[3] = { 0 }; /* 0 = 2, 1 = 3, 2 = 4 */
-
-	gpio[2] = 1; /* high - voltage ? */
-
-	switch (voltage) {
-	case SEC_VOLTAGE_13:
-		gpio[0] = 1;
-		break;
-	case SEC_VOLTAGE_18:
-		gpio[0] = 1;
-		gpio[1] = 1;
-		break;
-	default:
-	case SEC_VOLTAGE_OFF:
-		break;
-	}
-
-	for (i = 0; i < 3; i++)
-		if (stv090x_set_gpio(fe, i+2, 0, gpio[i], 0) != 0)
-			return -EREMOTEIO;
-	return 0;
-}
-
-static struct stv090x_config technisat_usb2_stv090x_config = {
-	.device         = STV0903,
-	.demod_mode     = STV090x_SINGLE,
-	.clk_mode       = STV090x_CLK_EXT,
-
-	.xtal           = 8000000,
-	.address        = 0x68,
-
-	.ts1_mode       = STV090x_TSMODE_DVBCI,
-	.ts1_clk        = 13400000,
-	.ts1_tei        = 1,
-
-	.repeater_level = STV090x_RPTLEVEL_64,
-
-	.tuner_bbgain   = 6,
-};
-
-static struct stv6110x_config technisat_usb2_stv6110x_config = {
-	.addr           = 0x60,
-	.refclk         = 16000000,
-	.clk_div        = 2,
-};
-
-static int technisat_usb2_frontend_attach(struct dvb_usb_adapter *a)
-{
-	struct usb_device *udev = a->dev->udev;
-	int ret;
-
-	a->fe_adap[0].fe = dvb_attach(stv090x_attach, &technisat_usb2_stv090x_config,
-			&a->dev->i2c_adap, STV090x_DEMODULATOR_0);
-
-	if (a->fe_adap[0].fe) {
-		struct stv6110x_devctl *ctl;
-
-		ctl = dvb_attach(stv6110x_attach,
-				a->fe_adap[0].fe,
-				&technisat_usb2_stv6110x_config,
-				&a->dev->i2c_adap);
-
-		if (ctl) {
-			technisat_usb2_stv090x_config.tuner_init          = ctl->tuner_init;
-			technisat_usb2_stv090x_config.tuner_sleep         = ctl->tuner_sleep;
-			technisat_usb2_stv090x_config.tuner_set_mode      = ctl->tuner_set_mode;
-			technisat_usb2_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency;
-			technisat_usb2_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency;
-			technisat_usb2_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth;
-			technisat_usb2_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth;
-			technisat_usb2_stv090x_config.tuner_set_bbgain    = ctl->tuner_set_bbgain;
-			technisat_usb2_stv090x_config.tuner_get_bbgain    = ctl->tuner_get_bbgain;
-			technisat_usb2_stv090x_config.tuner_set_refclk    = ctl->tuner_set_refclk;
-			technisat_usb2_stv090x_config.tuner_get_status    = ctl->tuner_get_status;
-
-			/* call the init function once to initialize
-			   tuner's clock output divider and demod's
-			   master clock */
-			if (a->fe_adap[0].fe->ops.init)
-				a->fe_adap[0].fe->ops.init(a->fe_adap[0].fe);
-
-			if (mutex_lock_interruptible(&a->dev->i2c_mutex) < 0)
-				return -EAGAIN;
-
-			ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-					SET_IFCLK_TO_EXTERNAL_TSCLK_VENDOR_REQUEST,
-					USB_TYPE_VENDOR | USB_DIR_OUT,
-					0, 0,
-					NULL, 0, 500);
-			mutex_unlock(&a->dev->i2c_mutex);
-
-			if (ret != 0)
-				err("could not set IF_CLK to external");
-
-			a->fe_adap[0].fe->ops.set_voltage = technisat_usb2_set_voltage;
-
-			/* if everything was successful assign a nice name to the frontend */
-			strlcpy(a->fe_adap[0].fe->ops.info.name, a->dev->desc->name,
-					sizeof(a->fe_adap[0].fe->ops.info.name));
-		} else {
-			dvb_frontend_detach(a->fe_adap[0].fe);
-			a->fe_adap[0].fe = NULL;
-		}
-	}
-
-	technisat_usb2_set_led_timer(a->dev, 1, 1);
-
-	return a->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-/* Remote control */
-
-/* the device is giving providing raw IR-signals to the host mapping
- * it only to one remote control is just the default implementation
- */
-#define NOMINAL_IR_BIT_TRANSITION_TIME_US 889
-#define NOMINAL_IR_BIT_TIME_US (2 * NOMINAL_IR_BIT_TRANSITION_TIME_US)
-
-#define FIRMWARE_CLOCK_TICK 83333
-#define FIRMWARE_CLOCK_DIVISOR 256
-
-#define IR_PERCENT_TOLERANCE 15
-
-#define NOMINAL_IR_BIT_TRANSITION_TICKS ((NOMINAL_IR_BIT_TRANSITION_TIME_US * 1000 * 1000) / FIRMWARE_CLOCK_TICK)
-#define NOMINAL_IR_BIT_TRANSITION_TICK_COUNT (NOMINAL_IR_BIT_TRANSITION_TICKS / FIRMWARE_CLOCK_DIVISOR)
-
-#define NOMINAL_IR_BIT_TIME_TICKS ((NOMINAL_IR_BIT_TIME_US * 1000 * 1000) / FIRMWARE_CLOCK_TICK)
-#define NOMINAL_IR_BIT_TIME_TICK_COUNT (NOMINAL_IR_BIT_TIME_TICKS / FIRMWARE_CLOCK_DIVISOR)
-
-#define MINIMUM_IR_BIT_TRANSITION_TICK_COUNT (NOMINAL_IR_BIT_TRANSITION_TICK_COUNT - ((NOMINAL_IR_BIT_TRANSITION_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100))
-#define MAXIMUM_IR_BIT_TRANSITION_TICK_COUNT (NOMINAL_IR_BIT_TRANSITION_TICK_COUNT + ((NOMINAL_IR_BIT_TRANSITION_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100))
-
-#define MINIMUM_IR_BIT_TIME_TICK_COUNT (NOMINAL_IR_BIT_TIME_TICK_COUNT - ((NOMINAL_IR_BIT_TIME_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100))
-#define MAXIMUM_IR_BIT_TIME_TICK_COUNT (NOMINAL_IR_BIT_TIME_TICK_COUNT + ((NOMINAL_IR_BIT_TIME_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100))
-
-static int technisat_usb2_get_ir(struct dvb_usb_device *d)
-{
-	u8 buf[62], *b;
-	int ret;
-	struct ir_raw_event ev;
-
-	buf[0] = GET_IR_DATA_VENDOR_REQUEST;
-	buf[1] = 0x08;
-	buf[2] = 0x8f;
-	buf[3] = MINIMUM_IR_BIT_TRANSITION_TICK_COUNT;
-	buf[4] = MAXIMUM_IR_BIT_TIME_TICK_COUNT;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-	ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
-			GET_IR_DATA_VENDOR_REQUEST,
-			USB_TYPE_VENDOR | USB_DIR_OUT,
-			0, 0,
-			buf, 5, 500);
-	if (ret < 0)
-		goto unlock;
-
-	buf[1] = 0;
-	buf[2] = 0;
-	ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
-			GET_IR_DATA_VENDOR_REQUEST,
-			USB_TYPE_VENDOR | USB_DIR_IN,
-			0x8080, 0,
-			buf, sizeof(buf), 500);
-
-unlock:
-	mutex_unlock(&d->i2c_mutex);
-
-	if (ret < 0)
-		return ret;
-
-	if (ret == 1)
-		return 0; /* no key pressed */
-
-	/* decoding */
-	b = buf+1;
-
-#if 0
-	deb_rc("RC: %d ", ret);
-	debug_dump(b, ret, deb_rc);
-#endif
-
-	ev.pulse = 0;
-	while (1) {
-		ev.pulse = !ev.pulse;
-		ev.duration = (*b * FIRMWARE_CLOCK_DIVISOR * FIRMWARE_CLOCK_TICK) / 1000;
-		ir_raw_event_store(d->rc_dev, &ev);
-
-		b++;
-		if (*b == 0xff) {
-			ev.pulse = 0;
-			ev.duration = 888888*2;
-			ir_raw_event_store(d->rc_dev, &ev);
-			break;
-		}
-	}
-
-	ir_raw_event_handle(d->rc_dev);
-
-	return 1;
-}
-
-static int technisat_usb2_rc_query(struct dvb_usb_device *d)
-{
-	int ret = technisat_usb2_get_ir(d);
-
-	if (ret < 0)
-		return ret;
-
-	if (ret == 0)
-		return 0;
-
-	if (!disable_led_control)
-		technisat_usb2_set_led(d, 1, LED_BLINK);
-
-	return 0;
-}
-
-/* DVB-USB and USB stuff follows */
-static struct usb_device_id technisat_usb2_id_table[] = {
-	{ USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_DVB_S2) },
-	{ 0 }		/* Terminating entry */
-};
-
-/* device description */
-static struct dvb_usb_device_properties technisat_usb2_devices = {
-	.caps              = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl          = CYPRESS_FX2,
-
-	.identify_state    = technisat_usb2_identify_state,
-	.firmware          = "dvb-usb-SkyStar_USB_HD_FW_v17_63.HEX.fw",
-
-	.size_of_priv      = sizeof(struct technisat_usb2_state),
-
-	.i2c_algo          = &technisat_usb2_i2c_algo,
-
-	.power_ctrl        = technisat_usb2_power_ctrl,
-	.read_mac_address  = technisat_usb2_read_mac_address,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.frontend_attach  = technisat_usb2_frontend_attach,
-
-			.stream = {
-				.type = USB_ISOC,
-				.count = 8,
-				.endpoint = 0x2,
-				.u = {
-					.isoc = {
-						.framesperurb = 32,
-						.framesize = 2048,
-						.interval = 3,
-					}
-				}
-			},
-		}},
-			.size_of_priv = 0,
-		},
-	},
-
-	.num_device_descs = 1,
-	.devices = {
-		{   "Technisat SkyStar USB HD (DVB-S/S2)",
-			{ &technisat_usb2_id_table[0], NULL },
-			{ NULL },
-		},
-	},
-
-	.rc.core = {
-		.rc_interval = 100,
-		.rc_codes    = RC_MAP_TECHNISAT_USB2,
-		.module_name = "technisat-usb2",
-		.rc_query    = technisat_usb2_rc_query,
-		.allowed_protos = RC_TYPE_ALL,
-		.driver_type    = RC_DRIVER_IR_RAW,
-	}
-};
-
-static int technisat_usb2_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	struct dvb_usb_device *dev;
-
-	if (dvb_usb_device_init(intf, &technisat_usb2_devices, THIS_MODULE,
-				&dev, adapter_nr) != 0)
-		return -ENODEV;
-
-	if (dev) {
-		struct technisat_usb2_state *state = dev->priv;
-		state->dev = dev;
-
-		if (!disable_led_control) {
-			INIT_DELAYED_WORK(&state->green_led_work,
-					technisat_usb2_green_led_control);
-			schedule_delayed_work(&state->green_led_work,
-					msecs_to_jiffies(500));
-		}
-	}
-
-	return 0;
-}
-
-static void technisat_usb2_disconnect(struct usb_interface *intf)
-{
-	struct dvb_usb_device *dev = usb_get_intfdata(intf);
-
-	/* work and stuff was only created when the device is is hot-state */
-	if (dev != NULL) {
-		struct technisat_usb2_state *state = dev->priv;
-		if (state != NULL)
-			cancel_delayed_work_sync(&state->green_led_work);
-	}
-
-	dvb_usb_device_exit(intf);
-}
-
-static struct usb_driver technisat_usb2_driver = {
-	.name       = "dvb_usb_technisat_usb2",
-	.probe      = technisat_usb2_probe,
-	.disconnect = technisat_usb2_disconnect,
-	.id_table   = technisat_usb2_id_table,
-};
-
-module_usb_driver(technisat_usb2_driver);
-
-MODULE_AUTHOR("Patrick Boettcher <pboettcher@kernellabs.com>");
-MODULE_DESCRIPTION("Driver for Technisat DVB-S/S2 USB 2.0 device");
-MODULE_VERSION("1.0");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/ttusb2.c b/drivers/media/dvb/dvb-usb/ttusb2.c
deleted file mode 100644
index e53a106..0000000
--- a/drivers/media/dvb/dvb-usb/ttusb2.c
+++ /dev/null
@@ -1,820 +0,0 @@
-/* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones
- * (e.g. Pinnacle 400e DVB-S USB2.0).
- *
- * The Pinnacle 400e uses the same protocol as the Technotrend USB1.1 boxes.
- *
- * TDA8263 + TDA10086
- *
- * I2C addresses:
- * 0x08 - LNBP21PD   - LNB power supply
- * 0x0e - TDA10086   - Demodulator
- * 0x50 - FX2 eeprom
- * 0x60 - TDA8263    - Tuner
- * 0x78 ???
- *
- * Copyright (c) 2002 Holger Waechtler <holger@convergence.de>
- * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net>
- * Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.org>
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#define DVB_USB_LOG_PREFIX "ttusb2"
-#include "dvb-usb.h"
-
-#include "ttusb2.h"
-
-#include "tda826x.h"
-#include "tda10086.h"
-#include "tda1002x.h"
-#include "tda10048.h"
-#include "tda827x.h"
-#include "lnbp21.h"
-/* CA */
-#include "dvb_ca_en50221.h"
-
-/* debug */
-static int dvb_usb_ttusb2_debug;
-#define deb_info(args...)   dprintk(dvb_usb_ttusb2_debug,0x01,args)
-module_param_named(debug,dvb_usb_ttusb2_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))." DVB_USB_DEBUG_STATUS);
-static int dvb_usb_ttusb2_debug_ci;
-module_param_named(debug_ci,dvb_usb_ttusb2_debug_ci, int, 0644);
-MODULE_PARM_DESC(debug_ci, "set debugging ci." DVB_USB_DEBUG_STATUS);
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-#define ci_dbg(format, arg...)                \
-do {                                          \
-	if (dvb_usb_ttusb2_debug_ci)                                    \
-		printk(KERN_DEBUG DVB_USB_LOG_PREFIX \
-			": %s " format "\n" , __func__, ## arg);       \
-} while (0)
-
-enum {
-	TT3650_CMD_CI_TEST = 0x40,
-	TT3650_CMD_CI_RD_CTRL,
-	TT3650_CMD_CI_WR_CTRL,
-	TT3650_CMD_CI_RD_ATTR,
-	TT3650_CMD_CI_WR_ATTR,
-	TT3650_CMD_CI_RESET,
-	TT3650_CMD_CI_SET_VIDEO_PORT
-};
-
-struct ttusb2_state {
-	struct dvb_ca_en50221 ca;
-	struct mutex ca_mutex;
-	u8 id;
-	u16 last_rc_key;
-};
-
-static int ttusb2_msg(struct dvb_usb_device *d, u8 cmd,
-		u8 *wbuf, int wlen, u8 *rbuf, int rlen)
-{
-	struct ttusb2_state *st = d->priv;
-	u8 *s, *r = NULL;
-	int ret = 0;
-
-	s = kzalloc(wlen+4, GFP_KERNEL);
-	if (!s)
-		return -ENOMEM;
-
-	r = kzalloc(64, GFP_KERNEL);
-	if (!r) {
-		kfree(s);
-		return -ENOMEM;
-	}
-
-	s[0] = 0xaa;
-	s[1] = ++st->id;
-	s[2] = cmd;
-	s[3] = wlen;
-	memcpy(&s[4],wbuf,wlen);
-
-	ret = dvb_usb_generic_rw(d, s, wlen+4, r, 64, 0);
-
-	if (ret  != 0 ||
-		r[0] != 0x55 ||
-		r[1] != s[1] ||
-		r[2] != cmd ||
-		(rlen > 0 && r[3] != rlen)) {
-		warn("there might have been an error during control message transfer. (rlen = %d, was %d)",rlen,r[3]);
-		kfree(s);
-		kfree(r);
-		return -EIO;
-	}
-
-	if (rlen > 0)
-		memcpy(rbuf, &r[4], rlen);
-
-	kfree(s);
-	kfree(r);
-
-	return 0;
-}
-
-/* ci */
-static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data, unsigned int write_len, unsigned int read_len)
-{
-	int ret;
-	u8 rx[60];/* (64 -4) */
-	ret = ttusb2_msg(d, cmd, data, write_len, rx, read_len);
-	if (!ret)
-		memcpy(data, rx, read_len);
-	return ret;
-}
-
-static int tt3650_ci_msg_locked(struct dvb_ca_en50221 *ca, u8 cmd, u8 *data, unsigned int write_len, unsigned int read_len)
-{
-	struct dvb_usb_device *d = ca->data;
-	struct ttusb2_state *state = d->priv;
-	int ret;
-
-	mutex_lock(&state->ca_mutex);
-	ret = tt3650_ci_msg(d, cmd, data, write_len, read_len);
-	mutex_unlock(&state->ca_mutex);
-
-	return ret;
-}
-
-static int tt3650_ci_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
-{
-	u8 buf[3];
-	int ret = 0;
-
-	if (slot)
-		return -EINVAL;
-
-	buf[0] = (address >> 8) & 0x0F;
-	buf[1] = address;
-
-
-	ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_RD_ATTR, buf, 2, 3);
-
-	ci_dbg("%04x -> %d 0x%02x", address, ret, buf[2]);
-
-	if (ret < 0)
-		return ret;
-
-	return buf[2];
-}
-
-static int tt3650_ci_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value)
-{
-	u8 buf[3];
-
-	ci_dbg("%d 0x%04x 0x%02x", slot, address, value);
-
-	if (slot)
-		return -EINVAL;
-
-	buf[0] = (address >> 8) & 0x0F;
-	buf[1] = address;
-	buf[2] = value;
-
-	return tt3650_ci_msg_locked(ca, TT3650_CMD_CI_WR_ATTR, buf, 3, 3);
-}
-
-static int tt3650_ci_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address)
-{
-	u8 buf[2];
-	int ret;
-
-	if (slot)
-		return -EINVAL;
-
-	buf[0] = address & 3;
-
-	ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_RD_CTRL, buf, 1, 2);
-
-	ci_dbg("0x%02x -> %d 0x%02x", address, ret, buf[1]);
-
-	if (ret < 0)
-		return ret;
-
-	return buf[1];
-}
-
-static int tt3650_ci_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value)
-{
-	u8 buf[2];
-
-	ci_dbg("%d 0x%02x 0x%02x", slot, address, value);
-
-	if (slot)
-		return -EINVAL;
-
-	buf[0] = address;
-	buf[1] = value;
-
-	return tt3650_ci_msg_locked(ca, TT3650_CMD_CI_WR_CTRL, buf, 2, 2);
-}
-
-static int tt3650_ci_set_video_port(struct dvb_ca_en50221 *ca, int slot, int enable)
-{
-	u8 buf[1];
-	int ret;
-
-	ci_dbg("%d %d", slot, enable);
-
-	if (slot)
-		return -EINVAL;
-
-	buf[0] = enable;
-
-	ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_SET_VIDEO_PORT, buf, 1, 1);
-	if (ret < 0)
-		return ret;
-
-	if (enable != buf[0]) {
-		err("CI not %sabled.", enable ? "en" : "dis");
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static int tt3650_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
-{
-	return tt3650_ci_set_video_port(ca, slot, 0);
-}
-
-static int tt3650_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
-{
-	return tt3650_ci_set_video_port(ca, slot, 1);
-}
-
-static int tt3650_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot)
-{
-	struct dvb_usb_device *d = ca->data;
-	struct ttusb2_state *state = d->priv;
-	u8 buf[1];
-	int ret;
-
-	ci_dbg("%d", slot);
-
-	if (slot)
-		return -EINVAL;
-
-	buf[0] = 0;
-
-	mutex_lock(&state->ca_mutex);
-
-	ret = tt3650_ci_msg(d, TT3650_CMD_CI_RESET, buf, 1, 1);
-	if (ret)
-		goto failed;
-
-	msleep(500);
-
-	buf[0] = 1;
-
-	ret = tt3650_ci_msg(d, TT3650_CMD_CI_RESET, buf, 1, 1);
-	if (ret)
-		goto failed;
-
-	msleep(500);
-
-	buf[0] = 0; /* FTA */
-
-	ret = tt3650_ci_msg(d, TT3650_CMD_CI_SET_VIDEO_PORT, buf, 1, 1);
-
-	msleep(1100);
-
- failed:
-	mutex_unlock(&state->ca_mutex);
-
-	return ret;
-}
-
-static int tt3650_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
-{
-	u8 buf[1];
-	int ret;
-
-	if (slot)
-		return -EINVAL;
-
-	ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_TEST, buf, 0, 1);
-	if (ret)
-		return ret;
-
-	if (1 == buf[0]) {
-		return DVB_CA_EN50221_POLL_CAM_PRESENT |
-			DVB_CA_EN50221_POLL_CAM_READY;
-	}
-	return 0;
-}
-
-static void tt3650_ci_uninit(struct dvb_usb_device *d)
-{
-	struct ttusb2_state *state;
-
-	ci_dbg("");
-
-	if (NULL == d)
-		return;
-
-	state = d->priv;
-	if (NULL == state)
-		return;
-
-	if (NULL == state->ca.data)
-		return;
-
-	dvb_ca_en50221_release(&state->ca);
-
-	memset(&state->ca, 0, sizeof(state->ca));
-}
-
-static int tt3650_ci_init(struct dvb_usb_adapter *a)
-{
-	struct dvb_usb_device *d = a->dev;
-	struct ttusb2_state *state = d->priv;
-	int ret;
-
-	ci_dbg("");
-
-	mutex_init(&state->ca_mutex);
-
-	state->ca.owner = THIS_MODULE;
-	state->ca.read_attribute_mem = tt3650_ci_read_attribute_mem;
-	state->ca.write_attribute_mem = tt3650_ci_write_attribute_mem;
-	state->ca.read_cam_control = tt3650_ci_read_cam_control;
-	state->ca.write_cam_control = tt3650_ci_write_cam_control;
-	state->ca.slot_reset = tt3650_ci_slot_reset;
-	state->ca.slot_shutdown = tt3650_ci_slot_shutdown;
-	state->ca.slot_ts_enable = tt3650_ci_slot_ts_enable;
-	state->ca.poll_slot_status = tt3650_ci_poll_slot_status;
-	state->ca.data = d;
-
-	ret = dvb_ca_en50221_init(&a->dvb_adap,
-				  &state->ca,
-				  /* flags */ 0,
-				  /* n_slots */ 1);
-	if (ret) {
-		err("Cannot initialize CI: Error %d.", ret);
-		memset(&state->ca, 0, sizeof(state->ca));
-		return ret;
-	}
-
-	info("CI initialized.");
-
-	return 0;
-}
-
-static int ttusb2_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	static u8 obuf[60], ibuf[60];
-	int i, write_read, read;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	if (num > 2)
-		warn("more than 2 i2c messages at a time is not handled yet. TODO.");
-
-	for (i = 0; i < num; i++) {
-		write_read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
-		read = msg[i].flags & I2C_M_RD;
-
-		obuf[0] = (msg[i].addr << 1) | (write_read | read);
-		if (read)
-			obuf[1] = 0;
-		else
-			obuf[1] = msg[i].len;
-
-		/* read request */
-		if (write_read)
-			obuf[2] = msg[i+1].len;
-		else if (read)
-			obuf[2] = msg[i].len;
-		else
-			obuf[2] = 0;
-
-		memcpy(&obuf[3], msg[i].buf, msg[i].len);
-
-		if (ttusb2_msg(d, CMD_I2C_XFER, obuf, obuf[1]+3, ibuf, obuf[2] + 3) < 0) {
-			err("i2c transfer failed.");
-			break;
-		}
-
-		if (write_read) {
-			memcpy(msg[i+1].buf, &ibuf[3], msg[i+1].len);
-			i++;
-		} else if (read)
-			memcpy(msg[i].buf, &ibuf[3], msg[i].len);
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-	return i;
-}
-
-static u32 ttusb2_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm ttusb2_i2c_algo = {
-	.master_xfer   = ttusb2_i2c_xfer,
-	.functionality = ttusb2_i2c_func,
-};
-
-/* command to poll IR receiver (copied from pctv452e.c) */
-#define CMD_GET_IR_CODE     0x1b
-
-/* IR */
-static int tt3650_rc_query(struct dvb_usb_device *d)
-{
-	int ret;
-	u8 rx[9]; /* A CMD_GET_IR_CODE reply is 9 bytes long */
-	struct ttusb2_state *st = d->priv;
-	ret = ttusb2_msg(d, CMD_GET_IR_CODE, NULL, 0, rx, sizeof(rx));
-	if (ret != 0)
-		return ret;
-
-	if (rx[8] & 0x01) {
-		/* got a "press" event */
-		st->last_rc_key = (rx[3] << 8) | rx[2];
-		deb_info("%s: cmd=0x%02x sys=0x%02x\n", __func__, rx[2], rx[3]);
-		rc_keydown(d->rc_dev, st->last_rc_key, 0);
-	} else if (st->last_rc_key) {
-		rc_keyup(d->rc_dev);
-		st->last_rc_key = 0;
-	}
-
-	return 0;
-}
-
-
-/* Callbacks for DVB USB */
-static int ttusb2_identify_state (struct usb_device *udev, struct
-		dvb_usb_device_properties *props, struct dvb_usb_device_description **desc,
-		int *cold)
-{
-	*cold = udev->descriptor.iManufacturer == 0 && udev->descriptor.iProduct == 0;
-	return 0;
-}
-
-static int ttusb2_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	u8 b = onoff;
-	ttusb2_msg(d, CMD_POWER, &b, 0, NULL, 0);
-	return ttusb2_msg(d, CMD_POWER, &b, 1, NULL, 0);
-}
-
-
-static struct tda10086_config tda10086_config = {
-	.demod_address = 0x0e,
-	.invert = 0,
-	.diseqc_tone = 1,
-	.xtal_freq = TDA10086_XTAL_16M,
-};
-
-static struct tda10023_config tda10023_config = {
-	.demod_address = 0x0c,
-	.invert = 0,
-	.xtal = 16000000,
-	.pll_m = 11,
-	.pll_p = 3,
-	.pll_n = 1,
-	.deltaf = 0xa511,
-};
-
-static struct tda10048_config tda10048_config = {
-	.demod_address    = 0x10 >> 1,
-	.output_mode      = TDA10048_PARALLEL_OUTPUT,
-	.inversion        = TDA10048_INVERSION_ON,
-	.dtv6_if_freq_khz = TDA10048_IF_4000,
-	.dtv7_if_freq_khz = TDA10048_IF_4500,
-	.dtv8_if_freq_khz = TDA10048_IF_5000,
-	.clk_freq_khz     = TDA10048_CLK_16000,
-	.no_firmware      = 1,
-	.set_pll          = true ,
-	.pll_m            = 5,
-	.pll_n            = 3,
-	.pll_p            = 0,
-};
-
-static struct tda827x_config tda827x_config = {
-	.config = 0,
-};
-
-static int ttusb2_frontend_tda10086_attach(struct dvb_usb_adapter *adap)
-{
-	if (usb_set_interface(adap->dev->udev,0,3) < 0)
-		err("set interface to alts=3 failed");
-
-	if ((adap->fe_adap[0].fe = dvb_attach(tda10086_attach, &tda10086_config, &adap->dev->i2c_adap)) == NULL) {
-		deb_info("TDA10086 attach failed\n");
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-static int ttusb2_ct3650_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-
-	return adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, enable);
-}
-
-static int ttusb2_frontend_tda10023_attach(struct dvb_usb_adapter *adap)
-{
-	if (usb_set_interface(adap->dev->udev, 0, 3) < 0)
-		err("set interface to alts=3 failed");
-
-	if (adap->fe_adap[0].fe == NULL) {
-		/* FE 0 DVB-C */
-		adap->fe_adap[0].fe = dvb_attach(tda10023_attach,
-			&tda10023_config, &adap->dev->i2c_adap, 0x48);
-
-		if (adap->fe_adap[0].fe == NULL) {
-			deb_info("TDA10023 attach failed\n");
-			return -ENODEV;
-		}
-		tt3650_ci_init(adap);
-	} else {
-		adap->fe_adap[1].fe = dvb_attach(tda10048_attach,
-			&tda10048_config, &adap->dev->i2c_adap);
-
-		if (adap->fe_adap[1].fe == NULL) {
-			deb_info("TDA10048 attach failed\n");
-			return -ENODEV;
-		}
-
-		/* tuner is behind TDA10023 I2C-gate */
-		adap->fe_adap[1].fe->ops.i2c_gate_ctrl = ttusb2_ct3650_i2c_gate_ctrl;
-
-	}
-
-	return 0;
-}
-
-static int ttusb2_tuner_tda827x_attach(struct dvb_usb_adapter *adap)
-{
-	struct dvb_frontend *fe;
-
-	/* MFE: select correct FE to attach tuner since that's called twice */
-	if (adap->fe_adap[1].fe == NULL)
-		fe = adap->fe_adap[0].fe;
-	else
-		fe = adap->fe_adap[1].fe;
-
-	/* attach tuner */
-	if (dvb_attach(tda827x_attach, fe, 0x61, &adap->dev->i2c_adap, &tda827x_config) == NULL) {
-		printk(KERN_ERR "%s: No tda827x found!\n", __func__);
-		return -ENODEV;
-	}
-	return 0;
-}
-
-static int ttusb2_tuner_tda826x_attach(struct dvb_usb_adapter *adap)
-{
-	if (dvb_attach(tda826x_attach, adap->fe_adap[0].fe, 0x60, &adap->dev->i2c_adap, 0) == NULL) {
-		deb_info("TDA8263 attach failed\n");
-		return -ENODEV;
-	}
-
-	if (dvb_attach(lnbp21_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap, 0, 0) == NULL) {
-		deb_info("LNBP21 attach failed\n");
-		return -ENODEV;
-	}
-	return 0;
-}
-
-/* DVB USB Driver stuff */
-static struct dvb_usb_device_properties ttusb2_properties;
-static struct dvb_usb_device_properties ttusb2_properties_s2400;
-static struct dvb_usb_device_properties ttusb2_properties_ct3650;
-
-static void ttusb2_usb_disconnect(struct usb_interface *intf)
-{
-	struct dvb_usb_device *d = usb_get_intfdata(intf);
-
-	tt3650_ci_uninit(d);
-	dvb_usb_device_exit(intf);
-}
-
-static int ttusb2_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	if (0 == dvb_usb_device_init(intf, &ttusb2_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &ttusb2_properties_s2400,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &ttusb2_properties_ct3650,
-				     THIS_MODULE, NULL, adapter_nr))
-		return 0;
-	return -ENODEV;
-}
-
-static struct usb_device_id ttusb2_table [] = {
-	{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_400E) },
-	{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_450E) },
-	{ USB_DEVICE(USB_VID_TECHNOTREND,
-		USB_PID_TECHNOTREND_CONNECT_S2400) },
-	{ USB_DEVICE(USB_VID_TECHNOTREND,
-		USB_PID_TECHNOTREND_CONNECT_CT3650) },
-	{}		/* Terminating entry */
-};
-MODULE_DEVICE_TABLE (usb, ttusb2_table);
-
-static struct dvb_usb_device_properties ttusb2_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = CYPRESS_FX2,
-	.firmware = "dvb-usb-pctv-400e-01.fw",
-
-	.size_of_priv = sizeof(struct ttusb2_state),
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = NULL, // ttusb2_streaming_ctrl,
-
-			.frontend_attach  = ttusb2_frontend_tda10086_attach,
-			.tuner_attach     = ttusb2_tuner_tda826x_attach,
-
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_ISOC,
-				.count = 5,
-				.endpoint = 0x02,
-				.u = {
-					.isoc = {
-						.framesperurb = 4,
-						.framesize = 940,
-						.interval = 1,
-					}
-				}
-			}
-		}},
-		}
-	},
-
-	.power_ctrl       = ttusb2_power_ctrl,
-	.identify_state   = ttusb2_identify_state,
-
-	.i2c_algo         = &ttusb2_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 2,
-	.devices = {
-		{   "Pinnacle 400e DVB-S USB2.0",
-			{ &ttusb2_table[0], NULL },
-			{ NULL },
-		},
-		{   "Pinnacle 450e DVB-S USB2.0",
-			{ &ttusb2_table[1], NULL },
-			{ NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties ttusb2_properties_s2400 = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = CYPRESS_FX2,
-	.firmware = "dvb-usb-tt-s2400-01.fw",
-
-	.size_of_priv = sizeof(struct ttusb2_state),
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = NULL,
-
-			.frontend_attach  = ttusb2_frontend_tda10086_attach,
-			.tuner_attach     = ttusb2_tuner_tda826x_attach,
-
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_ISOC,
-				.count = 5,
-				.endpoint = 0x02,
-				.u = {
-					.isoc = {
-						.framesperurb = 4,
-						.framesize = 940,
-						.interval = 1,
-					}
-				}
-			}
-		}},
-		}
-	},
-
-	.power_ctrl       = ttusb2_power_ctrl,
-	.identify_state   = ttusb2_identify_state,
-
-	.i2c_algo         = &ttusb2_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 1,
-	.devices = {
-		{   "Technotrend TT-connect S-2400",
-			{ &ttusb2_table[2], NULL },
-			{ NULL },
-		},
-	}
-};
-
-static struct dvb_usb_device_properties ttusb2_properties_ct3650 = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = CYPRESS_FX2,
-
-	.size_of_priv = sizeof(struct ttusb2_state),
-
-	.rc.core = {
-		.rc_interval      = 150, /* Less than IR_KEYPRESS_TIMEOUT */
-		.rc_codes         = RC_MAP_TT_1500,
-		.rc_query         = tt3650_rc_query,
-		.allowed_protos   = RC_TYPE_UNKNOWN,
-	},
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 2,
-		.fe = {{
-			.streaming_ctrl   = NULL,
-
-			.frontend_attach  = ttusb2_frontend_tda10023_attach,
-			.tuner_attach = ttusb2_tuner_tda827x_attach,
-
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_ISOC,
-				.count = 5,
-				.endpoint = 0x02,
-				.u = {
-					.isoc = {
-						.framesperurb = 4,
-						.framesize = 940,
-						.interval = 1,
-					}
-				}
-			}
-		}, {
-			.streaming_ctrl   = NULL,
-
-			.frontend_attach  = ttusb2_frontend_tda10023_attach,
-			.tuner_attach = ttusb2_tuner_tda827x_attach,
-
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_ISOC,
-				.count = 5,
-				.endpoint = 0x02,
-				.u = {
-					.isoc = {
-						.framesperurb = 4,
-						.framesize = 940,
-						.interval = 1,
-					}
-				}
-			}
-		}},
-		},
-	},
-
-	.power_ctrl       = ttusb2_power_ctrl,
-	.identify_state   = ttusb2_identify_state,
-
-	.i2c_algo         = &ttusb2_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 1,
-	.devices = {
-		{   "Technotrend TT-connect CT-3650",
-			.warm_ids = { &ttusb2_table[3], NULL },
-		},
-	}
-};
-
-static struct usb_driver ttusb2_driver = {
-	.name		= "dvb_usb_ttusb2",
-	.probe		= ttusb2_probe,
-	.disconnect	= ttusb2_usb_disconnect,
-	.id_table	= ttusb2_table,
-};
-
-module_usb_driver(ttusb2_driver);
-
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
-MODULE_DESCRIPTION("Driver for Pinnacle PCTV 400e DVB-S USB2.0");
-MODULE_VERSION("1.0");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/ttusb2.h b/drivers/media/dvb/dvb-usb/ttusb2.h
deleted file mode 100644
index 52a63af..0000000
--- a/drivers/media/dvb/dvb-usb/ttusb2.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones
- * (e.g. Pinnacle 400e DVB-S USB2.0).
- *
- * Copyright (c) 2002 Holger Waechtler <holger@convergence.de>
- * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net>
- * Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.de>
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#ifndef _DVB_USB_TTUSB2_H_
-#define _DVB_USB_TTUSB2_H_
-
-/* TTUSB protocol
- *
- * always to messages (out/in)
- * out message:
- * 0xaa <id> <cmdbyte> <datalen> <data...>
- *
- * in message (complete block is always 0x40 bytes long)
- * 0x55 <id> <cmdbyte> <datalen> <data...>
- *
- * id is incremented for each transaction
- */
-
-#define CMD_DSP_DOWNLOAD    0x13
-/* out data: <byte>[28]
- * last block must be empty */
-
-#define CMD_DSP_BOOT        0x14
-/* out data: nothing */
-
-#define CMD_POWER           0x15
-/* out data: <on=1/off=0> */
-
-#define CMD_LNB             0x16
-/* out data: <power=1> <18V=0,13V=1> <tone> <??=1> <??=1> */
-
-#define CMD_GET_VERSION     0x17
-/* in  data: <version_byte>[5] */
-
-#define CMD_DISEQC          0x18
-/* out data: <master=0xff/burst=??> <cmdlen> <cmdbytes>[cmdlen] */
-
-#define CMD_PID_ENABLE      0x22
-/* out data: <index> <type: ts=1/sec=2> <pid msb> <pid lsb> */
-
-#define CMD_PID_DISABLE     0x23
-/* out data: <index> */
-
-#define CMD_FILTER_ENABLE   0x24
-/* out data: <index> <pid_idx> <filter>[12] <mask>[12] */
-
-#define CMD_FILTER_DISABLE  0x25
-/* out data: <index> */
-
-#define CMD_GET_DSP_VERSION 0x26
-/* in  data: <version_byte>[28] */
-
-#define CMD_I2C_XFER        0x31
-/* out data: <addr << 1> <sndlen> <rcvlen> <data>[sndlen]
- * in  data: <addr << 1> <sndlen> <rcvlen> <data>[rcvlen] */
-
-#define CMD_I2C_BITRATE     0x32
-/* out data: <default=0> */
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/umt-010.c b/drivers/media/dvb/dvb-usb/umt-010.c
deleted file mode 100644
index 9b04229..0000000
--- a/drivers/media/dvb/dvb-usb/umt-010.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/* DVB USB framework compliant Linux driver for the HanfTek UMT-010 USB2.0
- * DVB-T receiver.
- *
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "dibusb.h"
-
-#include "mt352.h"
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static int umt_mt352_demod_init(struct dvb_frontend *fe)
-{
-	static u8 mt352_clock_config[] = { 0x89, 0xb8, 0x2d };
-	static u8 mt352_reset[] = { 0x50, 0x80 };
-	static u8 mt352_mclk_ratio[] = { 0x8b, 0x00 };
-	static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0x40 };
-	static u8 mt352_agc_cfg[] = { 0x67, 0x10, 0xa0 };
-
-	static u8 mt352_sec_agc_cfg1[] = { 0x6a, 0xff };
-	static u8 mt352_sec_agc_cfg2[] = { 0x6d, 0xff };
-	static u8 mt352_sec_agc_cfg3[] = { 0x70, 0x40 };
-	static u8 mt352_sec_agc_cfg4[] = { 0x7b, 0x03 };
-	static u8 mt352_sec_agc_cfg5[] = { 0x7d, 0x0f };
-
-	static u8 mt352_acq_ctl[] = { 0x53, 0x50 };
-	static u8 mt352_input_freq_1[] = { 0x56, 0x31, 0x06 };
-
-	mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
-	udelay(2000);
-	mt352_write(fe, mt352_reset, sizeof(mt352_reset));
-	mt352_write(fe, mt352_mclk_ratio, sizeof(mt352_mclk_ratio));
-
-	mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
-	mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
-
-	mt352_write(fe, mt352_sec_agc_cfg1, sizeof(mt352_sec_agc_cfg1));
-	mt352_write(fe, mt352_sec_agc_cfg2, sizeof(mt352_sec_agc_cfg2));
-	mt352_write(fe, mt352_sec_agc_cfg3, sizeof(mt352_sec_agc_cfg3));
-	mt352_write(fe, mt352_sec_agc_cfg4, sizeof(mt352_sec_agc_cfg4));
-	mt352_write(fe, mt352_sec_agc_cfg5, sizeof(mt352_sec_agc_cfg5));
-
-	mt352_write(fe, mt352_acq_ctl, sizeof(mt352_acq_ctl));
-	mt352_write(fe, mt352_input_freq_1, sizeof(mt352_input_freq_1));
-
-	return 0;
-}
-
-static int umt_mt352_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct mt352_config umt_config;
-
-	memset(&umt_config,0,sizeof(struct mt352_config));
-	umt_config.demod_init = umt_mt352_demod_init;
-	umt_config.demod_address = 0xf;
-
-	adap->fe_adap[0].fe = dvb_attach(mt352_attach, &umt_config, &adap->dev->i2c_adap);
-
-	return 0;
-}
-
-static int umt_tuner_attach (struct dvb_usb_adapter *adap)
-{
-	dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61, NULL, DVB_PLL_TUA6034);
-	return 0;
-}
-
-/* USB Driver stuff */
-static struct dvb_usb_device_properties umt_properties;
-
-static int umt_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	if (0 == dvb_usb_device_init(intf, &umt_properties,
-				     THIS_MODULE, NULL, adapter_nr))
-		return 0;
-	return -EINVAL;
-}
-
-/* do not change the order of the ID table */
-static struct usb_device_id umt_table [] = {
-/* 00 */	{ USB_DEVICE(USB_VID_HANFTEK, USB_PID_HANFTEK_UMT_010_COLD) },
-/* 01 */	{ USB_DEVICE(USB_VID_HANFTEK, USB_PID_HANFTEK_UMT_010_WARM) },
-			{ }		/* Terminating entry */
-};
-MODULE_DEVICE_TABLE (usb, umt_table);
-
-static struct dvb_usb_device_properties umt_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl = CYPRESS_FX2,
-	.firmware = "dvb-usb-umt-010-02.fw",
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = dibusb2_0_streaming_ctrl,
-			.frontend_attach  = umt_mt352_frontend_attach,
-			.tuner_attach     = umt_tuner_attach,
-
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = MAX_NO_URBS_FOR_DATA_STREAM,
-				.endpoint = 0x06,
-				.u = {
-					.bulk = {
-						.buffersize = 512,
-					}
-				}
-			},
-		}},
-			.size_of_priv     = sizeof(struct dibusb_state),
-		}
-	},
-	.power_ctrl       = dibusb_power_ctrl,
-
-	.i2c_algo         = &dibusb_i2c_algo,
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-
-	.num_device_descs = 1,
-	.devices = {
-		{	"Hanftek UMT-010 DVB-T USB2.0",
-			{ &umt_table[0], NULL },
-			{ &umt_table[1], NULL },
-		},
-	}
-};
-
-static struct usb_driver umt_driver = {
-	.name		= "dvb_usb_umt_010",
-	.probe		= umt_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table	= umt_table,
-};
-
-module_usb_driver(umt_driver);
-
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
-MODULE_DESCRIPTION("Driver for HanfTek UMT 010 USB2.0 DVB-T device");
-MODULE_VERSION("1.0");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/usb-urb.c b/drivers/media/dvb/dvb-usb/usb-urb.c
deleted file mode 100644
index d62ee0f..0000000
--- a/drivers/media/dvb/dvb-usb/usb-urb.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/* usb-urb.c is part of the DVB USB library.
- *
- * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
- * see dvb-usb-init.c for copyright information.
- *
- * This file keeps functions for initializing and handling the
- * BULK and ISOC USB data transfers in a generic way.
- * Can be used for DVB-only and also, that's the plan, for
- * Hybrid USB devices (analog and DVB).
- */
-#include "dvb-usb-common.h"
-
-/* URB stuff for streaming */
-static void usb_urb_complete(struct urb *urb)
-{
-	struct usb_data_stream *stream = urb->context;
-	int ptype = usb_pipetype(urb->pipe);
-	int i;
-	u8 *b;
-
-	deb_uxfer("'%s' urb completed. status: %d, length: %d/%d, pack_num: %d, errors: %d\n",
-		ptype == PIPE_ISOCHRONOUS ? "isoc" : "bulk",
-		urb->status,urb->actual_length,urb->transfer_buffer_length,
-		urb->number_of_packets,urb->error_count);
-
-	switch (urb->status) {
-		case 0:         /* success */
-		case -ETIMEDOUT:    /* NAK */
-			break;
-		case -ECONNRESET:   /* kill */
-		case -ENOENT:
-		case -ESHUTDOWN:
-			return;
-		default:        /* error */
-			deb_ts("urb completition error %d.\n", urb->status);
-			break;
-	}
-
-	b = (u8 *) urb->transfer_buffer;
-	switch (ptype) {
-		case PIPE_ISOCHRONOUS:
-			for (i = 0; i < urb->number_of_packets; i++) {
-
-				if (urb->iso_frame_desc[i].status != 0)
-					deb_ts("iso frame descriptor has an error: %d\n",urb->iso_frame_desc[i].status);
-				else if (urb->iso_frame_desc[i].actual_length > 0)
-					stream->complete(stream, b + urb->iso_frame_desc[i].offset, urb->iso_frame_desc[i].actual_length);
-
-				urb->iso_frame_desc[i].status = 0;
-				urb->iso_frame_desc[i].actual_length = 0;
-			}
-			debug_dump(b,20,deb_uxfer);
-			break;
-		case PIPE_BULK:
-			if (urb->actual_length > 0)
-				stream->complete(stream, b, urb->actual_length);
-			break;
-		default:
-			err("unknown endpoint type in completition handler.");
-			return;
-	}
-	usb_submit_urb(urb,GFP_ATOMIC);
-}
-
-int usb_urb_kill(struct usb_data_stream *stream)
-{
-	int i;
-	for (i = 0; i < stream->urbs_submitted; i++) {
-		deb_ts("killing URB no. %d.\n",i);
-
-		/* stop the URB */
-		usb_kill_urb(stream->urb_list[i]);
-	}
-	stream->urbs_submitted = 0;
-	return 0;
-}
-
-int usb_urb_submit(struct usb_data_stream *stream)
-{
-	int i,ret;
-	for (i = 0; i < stream->urbs_initialized; i++) {
-		deb_ts("submitting URB no. %d\n",i);
-		if ((ret = usb_submit_urb(stream->urb_list[i],GFP_ATOMIC))) {
-			err("could not submit URB no. %d - get them all back",i);
-			usb_urb_kill(stream);
-			return ret;
-		}
-		stream->urbs_submitted++;
-	}
-	return 0;
-}
-
-static int usb_free_stream_buffers(struct usb_data_stream *stream)
-{
-	if (stream->state & USB_STATE_URB_BUF) {
-		while (stream->buf_num) {
-			stream->buf_num--;
-			deb_mem("freeing buffer %d\n",stream->buf_num);
-			usb_free_coherent(stream->udev, stream->buf_size,
-					  stream->buf_list[stream->buf_num],
-					  stream->dma_addr[stream->buf_num]);
-		}
-	}
-
-	stream->state &= ~USB_STATE_URB_BUF;
-
-	return 0;
-}
-
-static int usb_allocate_stream_buffers(struct usb_data_stream *stream, int num, unsigned long size)
-{
-	stream->buf_num = 0;
-	stream->buf_size = size;
-
-	deb_mem("all in all I will use %lu bytes for streaming\n",num*size);
-
-	for (stream->buf_num = 0; stream->buf_num < num; stream->buf_num++) {
-		deb_mem("allocating buffer %d\n",stream->buf_num);
-		if (( stream->buf_list[stream->buf_num] =
-					usb_alloc_coherent(stream->udev, size, GFP_ATOMIC,
-					&stream->dma_addr[stream->buf_num]) ) == NULL) {
-			deb_mem("not enough memory for urb-buffer allocation.\n");
-			usb_free_stream_buffers(stream);
-			return -ENOMEM;
-		}
-		deb_mem("buffer %d: %p (dma: %Lu)\n",
-			stream->buf_num,
-stream->buf_list[stream->buf_num], (long long)stream->dma_addr[stream->buf_num]);
-		memset(stream->buf_list[stream->buf_num],0,size);
-		stream->state |= USB_STATE_URB_BUF;
-	}
-	deb_mem("allocation successful\n");
-
-	return 0;
-}
-
-static int usb_bulk_urb_init(struct usb_data_stream *stream)
-{
-	int i, j;
-
-	if ((i = usb_allocate_stream_buffers(stream,stream->props.count,
-					stream->props.u.bulk.buffersize)) < 0)
-		return i;
-
-	/* allocate the URBs */
-	for (i = 0; i < stream->props.count; i++) {
-		stream->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC);
-		if (!stream->urb_list[i]) {
-			deb_mem("not enough memory for urb_alloc_urb!.\n");
-			for (j = 0; j < i; j++)
-				usb_free_urb(stream->urb_list[j]);
-			return -ENOMEM;
-		}
-		usb_fill_bulk_urb( stream->urb_list[i], stream->udev,
-				usb_rcvbulkpipe(stream->udev,stream->props.endpoint),
-				stream->buf_list[i],
-				stream->props.u.bulk.buffersize,
-				usb_urb_complete, stream);
-
-		stream->urb_list[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
-		stream->urb_list[i]->transfer_dma = stream->dma_addr[i];
-		stream->urbs_initialized++;
-	}
-	return 0;
-}
-
-static int usb_isoc_urb_init(struct usb_data_stream *stream)
-{
-	int i,j;
-
-	if ((i = usb_allocate_stream_buffers(stream,stream->props.count,
-					stream->props.u.isoc.framesize*stream->props.u.isoc.framesperurb)) < 0)
-		return i;
-
-	/* allocate the URBs */
-	for (i = 0; i < stream->props.count; i++) {
-		struct urb *urb;
-		int frame_offset = 0;
-
-		stream->urb_list[i] = usb_alloc_urb(stream->props.u.isoc.framesperurb, GFP_ATOMIC);
-		if (!stream->urb_list[i]) {
-			deb_mem("not enough memory for urb_alloc_urb!\n");
-			for (j = 0; j < i; j++)
-				usb_free_urb(stream->urb_list[j]);
-			return -ENOMEM;
-		}
-
-		urb = stream->urb_list[i];
-
-		urb->dev = stream->udev;
-		urb->context = stream;
-		urb->complete = usb_urb_complete;
-		urb->pipe = usb_rcvisocpipe(stream->udev,stream->props.endpoint);
-		urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
-		urb->interval = stream->props.u.isoc.interval;
-		urb->number_of_packets = stream->props.u.isoc.framesperurb;
-		urb->transfer_buffer_length = stream->buf_size;
-		urb->transfer_buffer = stream->buf_list[i];
-		urb->transfer_dma = stream->dma_addr[i];
-
-		for (j = 0; j < stream->props.u.isoc.framesperurb; j++) {
-			urb->iso_frame_desc[j].offset = frame_offset;
-			urb->iso_frame_desc[j].length = stream->props.u.isoc.framesize;
-			frame_offset += stream->props.u.isoc.framesize;
-		}
-
-		stream->urbs_initialized++;
-	}
-	return 0;
-}
-
-int usb_urb_init(struct usb_data_stream *stream, struct usb_data_stream_properties *props)
-{
-	if (stream == NULL || props == NULL)
-		return -EINVAL;
-
-	memcpy(&stream->props, props, sizeof(*props));
-
-	usb_clear_halt(stream->udev,usb_rcvbulkpipe(stream->udev,stream->props.endpoint));
-
-	if (stream->complete == NULL) {
-		err("there is no data callback - this doesn't make sense.");
-		return -EINVAL;
-	}
-
-	switch (stream->props.type) {
-		case USB_BULK:
-			return usb_bulk_urb_init(stream);
-		case USB_ISOC:
-			return usb_isoc_urb_init(stream);
-		default:
-			err("unknown URB-type for data transfer.");
-			return -EINVAL;
-	}
-}
-
-int usb_urb_exit(struct usb_data_stream *stream)
-{
-	int i;
-
-	usb_urb_kill(stream);
-
-	for (i = 0; i < stream->urbs_initialized; i++) {
-		if (stream->urb_list[i] != NULL) {
-			deb_mem("freeing URB no. %d.\n",i);
-			/* free the URBs */
-			usb_free_urb(stream->urb_list[i]);
-		}
-	}
-	stream->urbs_initialized = 0;
-
-	usb_free_stream_buffers(stream);
-	return 0;
-}
diff --git a/drivers/media/dvb/dvb-usb/vp702x-fe.c b/drivers/media/dvb/dvb-usb/vp702x-fe.c
deleted file mode 100644
index 5eab468..0000000
--- a/drivers/media/dvb/dvb-usb/vp702x-fe.c
+++ /dev/null
@@ -1,379 +0,0 @@
-/* DVB frontend part of the Linux driver for the TwinhanDTV StarBox USB2.0
- * DVB-S receiver.
- *
- * Copyright (C) 2005 Ralph Metzler <rjkm@metzlerbros.de>
- *                    Metzler Brothers Systementwicklung GbR
- *
- * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@desy.de>
- *
- * Thanks to Twinhan who kindly provided hardware and information.
- *
- * This file can be removed soon, after the DST-driver is rewritten to provice
- * the frontend-controlling separately.
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- *
- */
-#include "vp702x.h"
-
-struct vp702x_fe_state {
-	struct dvb_frontend fe;
-	struct dvb_usb_device *d;
-
-	struct dvb_frontend_ops ops;
-
-	fe_sec_voltage_t voltage;
-	fe_sec_tone_mode_t tone_mode;
-
-	u8 lnb_buf[8];
-
-	u8 lock;
-	u8 sig;
-	u8 snr;
-
-	unsigned long next_status_check;
-	unsigned long status_check_interval;
-};
-
-static int vp702x_fe_refresh_state(struct vp702x_fe_state *st)
-{
-	struct vp702x_device_state *dst = st->d->priv;
-	u8 *buf;
-
-	if (time_after(jiffies, st->next_status_check)) {
-		mutex_lock(&dst->buf_mutex);
-		buf = dst->buf;
-
-		vp702x_usb_in_op(st->d, READ_STATUS, 0, 0, buf, 10);
-		st->lock = buf[4];
-
-		vp702x_usb_in_op(st->d, READ_TUNER_REG_REQ, 0x11, 0, buf, 1);
-		st->snr = buf[0];
-
-		vp702x_usb_in_op(st->d, READ_TUNER_REG_REQ, 0x15, 0, buf, 1);
-		st->sig = buf[0];
-
-		mutex_unlock(&dst->buf_mutex);
-		st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000;
-	}
-	return 0;
-}
-
-static u8 vp702x_chksum(u8 *buf,int f, int count)
-{
-	u8 s = 0;
-	int i;
-	for (i = f; i < f+count; i++)
-		s += buf[i];
-	return ~s+1;
-}
-
-static int vp702x_fe_read_status(struct dvb_frontend* fe, fe_status_t *status)
-{
-	struct vp702x_fe_state *st = fe->demodulator_priv;
-	vp702x_fe_refresh_state(st);
-	deb_fe("%s\n",__func__);
-
-	if (st->lock == 0)
-		*status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_SIGNAL | FE_HAS_CARRIER;
-	else
-		*status = 0;
-
-	if (*status & FE_HAS_LOCK)
-		st->status_check_interval = 1000;
-	else
-		st->status_check_interval = 250;
-	return 0;
-}
-
-/* not supported by this Frontend */
-static int vp702x_fe_read_ber(struct dvb_frontend* fe, u32 *ber)
-{
-	struct vp702x_fe_state *st = fe->demodulator_priv;
-	vp702x_fe_refresh_state(st);
-	*ber = 0;
-	return 0;
-}
-
-/* not supported by this Frontend */
-static int vp702x_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
-{
-	struct vp702x_fe_state *st = fe->demodulator_priv;
-	vp702x_fe_refresh_state(st);
-	*unc = 0;
-	return 0;
-}
-
-static int vp702x_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
-{
-	struct vp702x_fe_state *st = fe->demodulator_priv;
-	vp702x_fe_refresh_state(st);
-
-	*strength = (st->sig << 8) | st->sig;
-	return 0;
-}
-
-static int vp702x_fe_read_snr(struct dvb_frontend* fe, u16 *snr)
-{
-	u8 _snr;
-	struct vp702x_fe_state *st = fe->demodulator_priv;
-	vp702x_fe_refresh_state(st);
-
-	_snr = (st->snr & 0x1f) * 0xff / 0x1f;
-	*snr = (_snr << 8) | _snr;
-	return 0;
-}
-
-static int vp702x_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
-{
-	deb_fe("%s\n",__func__);
-	tune->min_delay_ms = 2000;
-	return 0;
-}
-
-static int vp702x_fe_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
-	struct vp702x_fe_state *st = fe->demodulator_priv;
-	struct vp702x_device_state *dst = st->d->priv;
-	u32 freq = fep->frequency/1000;
-	/*CalFrequency*/
-/*	u16 frequencyRef[16] = { 2, 4, 8, 16, 32, 64, 128, 256, 24, 5, 10, 20, 40, 80, 160, 320 }; */
-	u64 sr;
-	u8 *cmd;
-
-	mutex_lock(&dst->buf_mutex);
-
-	cmd = dst->buf;
-	memset(cmd, 0, 10);
-
-	cmd[0] = (freq >> 8) & 0x7f;
-	cmd[1] =  freq       & 0xff;
-	cmd[2] = 1; /* divrate == 4 -> frequencyRef[1] -> 1 here */
-
-	sr = (u64) (fep->symbol_rate/1000) << 20;
-	do_div(sr,88000);
-	cmd[3] = (sr >> 12) & 0xff;
-	cmd[4] = (sr >> 4)  & 0xff;
-	cmd[5] = (sr << 4)  & 0xf0;
-
-	deb_fe("setting frontend to: %u -> %u (%x) LNB-based GHz, symbolrate: %d -> %lu (%lx)\n",
-			fep->frequency, freq, freq, fep->symbol_rate,
-			(unsigned long) sr, (unsigned long) sr);
-
-/*	if (fep->inversion == INVERSION_ON)
-		cmd[6] |= 0x80; */
-
-	if (st->voltage == SEC_VOLTAGE_18)
-		cmd[6] |= 0x40;
-
-/*	if (fep->symbol_rate > 8000000)
-		cmd[6] |= 0x20;
-
-	if (fep->frequency < 1531000)
-		cmd[6] |= 0x04;
-
-	if (st->tone_mode == SEC_TONE_ON)
-		cmd[6] |= 0x01;*/
-
-	cmd[7] = vp702x_chksum(cmd,0,7);
-
-	st->status_check_interval = 250;
-	st->next_status_check = jiffies;
-
-	vp702x_usb_inout_op(st->d, cmd, 8, cmd, 10, 100);
-
-	if (cmd[2] == 0 && cmd[3] == 0)
-		deb_fe("tuning failed.\n");
-	else
-		deb_fe("tuning succeeded.\n");
-
-	mutex_unlock(&dst->buf_mutex);
-
-	return 0;
-}
-
-static int vp702x_fe_init(struct dvb_frontend *fe)
-{
-	struct vp702x_fe_state *st = fe->demodulator_priv;
-	deb_fe("%s\n",__func__);
-	vp702x_usb_in_op(st->d, RESET_TUNER, 0, 0, NULL, 0);
-	return 0;
-}
-
-static int vp702x_fe_sleep(struct dvb_frontend *fe)
-{
-	deb_fe("%s\n",__func__);
-	return 0;
-}
-
-static int vp702x_fe_send_diseqc_msg (struct dvb_frontend* fe,
-				    struct dvb_diseqc_master_cmd *m)
-{
-	u8 *cmd;
-	struct vp702x_fe_state *st = fe->demodulator_priv;
-	struct vp702x_device_state *dst = st->d->priv;
-
-	deb_fe("%s\n",__func__);
-
-	if (m->msg_len > 4)
-		return -EINVAL;
-
-	mutex_lock(&dst->buf_mutex);
-
-	cmd = dst->buf;
-	cmd[1] = SET_DISEQC_CMD;
-	cmd[2] = m->msg_len;
-	memcpy(&cmd[3], m->msg, m->msg_len);
-	cmd[7] = vp702x_chksum(cmd, 0, 7);
-
-	vp702x_usb_inout_op(st->d, cmd, 8, cmd, 10, 100);
-
-	if (cmd[2] == 0 && cmd[3] == 0)
-		deb_fe("diseqc cmd failed.\n");
-	else
-		deb_fe("diseqc cmd succeeded.\n");
-
-	mutex_unlock(&dst->buf_mutex);
-
-	return 0;
-}
-
-static int vp702x_fe_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
-{
-	deb_fe("%s\n",__func__);
-	return 0;
-}
-
-static int vp702x_fe_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
-{
-	struct vp702x_fe_state *st = fe->demodulator_priv;
-	struct vp702x_device_state *dst = st->d->priv;
-	u8 *buf;
-
-	deb_fe("%s\n",__func__);
-
-	st->tone_mode = tone;
-
-	if (tone == SEC_TONE_ON)
-		st->lnb_buf[2] = 0x02;
-	else
-		st->lnb_buf[2] = 0x00;
-
-	st->lnb_buf[7] = vp702x_chksum(st->lnb_buf, 0, 7);
-
-	mutex_lock(&dst->buf_mutex);
-
-	buf = dst->buf;
-	memcpy(buf, st->lnb_buf, 8);
-
-	vp702x_usb_inout_op(st->d, buf, 8, buf, 10, 100);
-	if (buf[2] == 0 && buf[3] == 0)
-		deb_fe("set_tone cmd failed.\n");
-	else
-		deb_fe("set_tone cmd succeeded.\n");
-
-	mutex_unlock(&dst->buf_mutex);
-
-	return 0;
-}
-
-static int vp702x_fe_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t
-		voltage)
-{
-	struct vp702x_fe_state *st = fe->demodulator_priv;
-	struct vp702x_device_state *dst = st->d->priv;
-	u8 *buf;
-	deb_fe("%s\n",__func__);
-
-	st->voltage = voltage;
-
-	if (voltage != SEC_VOLTAGE_OFF)
-		st->lnb_buf[4] = 0x01;
-	else
-		st->lnb_buf[4] = 0x00;
-
-	st->lnb_buf[7] = vp702x_chksum(st->lnb_buf, 0, 7);
-
-	mutex_lock(&dst->buf_mutex);
-
-	buf = dst->buf;
-	memcpy(buf, st->lnb_buf, 8);
-
-	vp702x_usb_inout_op(st->d, buf, 8, buf, 10, 100);
-	if (buf[2] == 0 && buf[3] == 0)
-		deb_fe("set_voltage cmd failed.\n");
-	else
-		deb_fe("set_voltage cmd succeeded.\n");
-
-	mutex_unlock(&dst->buf_mutex);
-	return 0;
-}
-
-static void vp702x_fe_release(struct dvb_frontend* fe)
-{
-	struct vp702x_fe_state *st = fe->demodulator_priv;
-	kfree(st);
-}
-
-static struct dvb_frontend_ops vp702x_fe_ops;
-
-struct dvb_frontend * vp702x_fe_attach(struct dvb_usb_device *d)
-{
-	struct vp702x_fe_state *s = kzalloc(sizeof(struct vp702x_fe_state), GFP_KERNEL);
-	if (s == NULL)
-		goto error;
-
-	s->d = d;
-
-	memcpy(&s->fe.ops,&vp702x_fe_ops,sizeof(struct dvb_frontend_ops));
-	s->fe.demodulator_priv = s;
-
-	s->lnb_buf[1] = SET_LNB_POWER;
-	s->lnb_buf[3] = 0xff; /* 0=tone burst, 2=data burst, ff=off */
-
-	return &s->fe;
-error:
-	return NULL;
-}
-
-
-static struct dvb_frontend_ops vp702x_fe_ops = {
-	.delsys = { SYS_DVBS },
-	.info = {
-		.name           = "Twinhan DST-like frontend (VP7021/VP7020) DVB-S",
-		.frequency_min       = 950000,
-		.frequency_max       = 2150000,
-		.frequency_stepsize  = 1000,   /* kHz for QPSK frontends */
-		.frequency_tolerance = 0,
-		.symbol_rate_min     = 1000000,
-		.symbol_rate_max     = 45000000,
-		.symbol_rate_tolerance = 500,  /* ppm */
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-		FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
-		FE_CAN_QPSK |
-		FE_CAN_FEC_AUTO
-	},
-	.release = vp702x_fe_release,
-
-	.init  = vp702x_fe_init,
-	.sleep = vp702x_fe_sleep,
-
-	.set_frontend = vp702x_fe_set_frontend,
-	.get_tune_settings = vp702x_fe_get_tune_settings,
-
-	.read_status = vp702x_fe_read_status,
-	.read_ber = vp702x_fe_read_ber,
-	.read_signal_strength = vp702x_fe_read_signal_strength,
-	.read_snr = vp702x_fe_read_snr,
-	.read_ucblocks = vp702x_fe_read_unc_blocks,
-
-	.diseqc_send_master_cmd = vp702x_fe_send_diseqc_msg,
-	.diseqc_send_burst = vp702x_fe_send_diseqc_burst,
-	.set_tone = vp702x_fe_set_tone,
-	.set_voltage = vp702x_fe_set_voltage,
-};
diff --git a/drivers/media/dvb/dvb-usb/vp702x.c b/drivers/media/dvb/dvb-usb/vp702x.c
deleted file mode 100644
index 07c673a..0000000
--- a/drivers/media/dvb/dvb-usb/vp702x.c
+++ /dev/null
@@ -1,444 +0,0 @@
-/* DVB USB compliant Linux driver for the TwinhanDTV StarBox USB2.0 DVB-S
- * receiver.
- *
- * Copyright (C) 2005 Ralph Metzler <rjkm@metzlerbros.de>
- *                    Metzler Brothers Systementwicklung GbR
- *
- * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@desy.de>
- *
- * Thanks to Twinhan who kindly provided hardware and information.
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "vp702x.h"
-#include <linux/mutex.h>
-
-/* debug */
-int dvb_usb_vp702x_debug;
-module_param_named(debug,dvb_usb_vp702x_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS);
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-struct vp702x_adapter_state {
-	int pid_filter_count;
-	int pid_filter_can_bypass;
-	u8  pid_filter_state;
-};
-
-static int vp702x_usb_in_op_unlocked(struct dvb_usb_device *d, u8 req,
-				     u16 value, u16 index, u8 *b, int blen)
-{
-	int ret;
-
-	ret = usb_control_msg(d->udev,
-		usb_rcvctrlpipe(d->udev, 0),
-		req,
-		USB_TYPE_VENDOR | USB_DIR_IN,
-		value, index, b, blen,
-		2000);
-
-	if (ret < 0) {
-		warn("usb in operation failed. (%d)", ret);
-		ret = -EIO;
-	} else
-		ret = 0;
-
-
-	deb_xfer("in: req. %02x, val: %04x, ind: %04x, buffer: ",req,value,index);
-	debug_dump(b,blen,deb_xfer);
-
-	return ret;
-}
-
-int vp702x_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value,
-			    u16 index, u8 *b, int blen)
-{
-	int ret;
-
-	mutex_lock(&d->usb_mutex);
-	ret = vp702x_usb_in_op_unlocked(d, req, value, index, b, blen);
-	mutex_unlock(&d->usb_mutex);
-
-	return ret;
-}
-
-int vp702x_usb_out_op_unlocked(struct dvb_usb_device *d, u8 req, u16 value,
-				      u16 index, u8 *b, int blen)
-{
-	int ret;
-	deb_xfer("out: req. %02x, val: %04x, ind: %04x, buffer: ",req,value,index);
-	debug_dump(b,blen,deb_xfer);
-
-	if ((ret = usb_control_msg(d->udev,
-			usb_sndctrlpipe(d->udev,0),
-			req,
-			USB_TYPE_VENDOR | USB_DIR_OUT,
-			value,index,b,blen,
-			2000)) != blen) {
-		warn("usb out operation failed. (%d)",ret);
-		return -EIO;
-	} else
-		return 0;
-}
-
-int vp702x_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
-			     u16 index, u8 *b, int blen)
-{
-	int ret;
-
-	mutex_lock(&d->usb_mutex);
-	ret = vp702x_usb_out_op_unlocked(d, req, value, index, b, blen);
-	mutex_unlock(&d->usb_mutex);
-
-	return ret;
-}
-
-int vp702x_usb_inout_op(struct dvb_usb_device *d, u8 *o, int olen, u8 *i, int ilen, int msec)
-{
-	int ret;
-
-	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
-		return ret;
-
-	ret = vp702x_usb_out_op_unlocked(d, REQUEST_OUT, 0, 0, o, olen);
-	msleep(msec);
-	ret = vp702x_usb_in_op_unlocked(d, REQUEST_IN, 0, 0, i, ilen);
-
-	mutex_unlock(&d->usb_mutex);
-	return ret;
-}
-
-static int vp702x_usb_inout_cmd(struct dvb_usb_device *d, u8 cmd, u8 *o,
-				int olen, u8 *i, int ilen, int msec)
-{
-	struct vp702x_device_state *st = d->priv;
-	int ret = 0;
-	u8 *buf;
-	int buflen = max(olen + 2, ilen + 1);
-
-	ret = mutex_lock_interruptible(&st->buf_mutex);
-	if (ret < 0)
-		return ret;
-
-	if (buflen > st->buf_len) {
-		buf = kmalloc(buflen, GFP_KERNEL);
-		if (!buf) {
-			mutex_unlock(&st->buf_mutex);
-			return -ENOMEM;
-		}
-		info("successfully reallocated a bigger buffer");
-		kfree(st->buf);
-		st->buf = buf;
-		st->buf_len = buflen;
-	} else {
-		buf = st->buf;
-	}
-
-	buf[0] = 0x00;
-	buf[1] = cmd;
-	memcpy(&buf[2], o, olen);
-
-	ret = vp702x_usb_inout_op(d, buf, olen+2, buf, ilen+1, msec);
-
-	if (ret == 0)
-		memcpy(i, &buf[1], ilen);
-	mutex_unlock(&st->buf_mutex);
-
-	return ret;
-}
-
-static int vp702x_set_pld_mode(struct dvb_usb_adapter *adap, u8 bypass)
-{
-	int ret;
-	struct vp702x_device_state *st = adap->dev->priv;
-	u8 *buf;
-
-	mutex_lock(&st->buf_mutex);
-
-	buf = st->buf;
-	memset(buf, 0, 16);
-
-	ret = vp702x_usb_in_op(adap->dev, 0xe0, (bypass << 8) | 0x0e,
-			0, buf, 16);
-	mutex_unlock(&st->buf_mutex);
-	return ret;
-}
-
-static int vp702x_set_pld_state(struct dvb_usb_adapter *adap, u8 state)
-{
-	int ret;
-	struct vp702x_device_state *st = adap->dev->priv;
-	u8 *buf;
-
-	mutex_lock(&st->buf_mutex);
-
-	buf = st->buf;
-	memset(buf, 0, 16);
-	ret = vp702x_usb_in_op(adap->dev, 0xe0, (state << 8) | 0x0f,
-			0, buf, 16);
-
-	mutex_unlock(&st->buf_mutex);
-
-	return ret;
-}
-
-static int vp702x_set_pid(struct dvb_usb_adapter *adap, u16 pid, u8 id, int onoff)
-{
-	struct vp702x_adapter_state *st = adap->priv;
-	struct vp702x_device_state *dst = adap->dev->priv;
-	u8 *buf;
-
-	if (onoff)
-		st->pid_filter_state |=  (1 << id);
-	else {
-		st->pid_filter_state &= ~(1 << id);
-		pid = 0xffff;
-	}
-
-	id = 0x10 + id*2;
-
-	vp702x_set_pld_state(adap, st->pid_filter_state);
-
-	mutex_lock(&dst->buf_mutex);
-
-	buf = dst->buf;
-	memset(buf, 0, 16);
-	vp702x_usb_in_op(adap->dev, 0xe0, (((pid >> 8) & 0xff) << 8) | (id), 0, buf, 16);
-	vp702x_usb_in_op(adap->dev, 0xe0, (((pid     ) & 0xff) << 8) | (id+1), 0, buf, 16);
-
-	mutex_unlock(&dst->buf_mutex);
-
-	return 0;
-}
-
-
-static int vp702x_init_pid_filter(struct dvb_usb_adapter *adap)
-{
-	struct vp702x_adapter_state *st = adap->priv;
-	struct vp702x_device_state *dst = adap->dev->priv;
-	int i;
-	u8 *b;
-
-	st->pid_filter_count = 8;
-	st->pid_filter_can_bypass = 1;
-	st->pid_filter_state = 0x00;
-
-	vp702x_set_pld_mode(adap, 1); /* bypass */
-
-	for (i = 0; i < st->pid_filter_count; i++)
-		vp702x_set_pid(adap, 0xffff, i, 1);
-
-	mutex_lock(&dst->buf_mutex);
-	b = dst->buf;
-	memset(b, 0, 10);
-	vp702x_usb_in_op(adap->dev, 0xb5, 3, 0, b, 10);
-	vp702x_usb_in_op(adap->dev, 0xb5, 0, 0, b, 10);
-	vp702x_usb_in_op(adap->dev, 0xb5, 1, 0, b, 10);
-	mutex_unlock(&dst->buf_mutex);
-	/*vp702x_set_pld_mode(d, 0); // filter */
-
-	return 0;
-}
-
-static int vp702x_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	return 0;
-}
-
-/* keys for the enclosed remote control */
-static struct rc_map_table rc_map_vp702x_table[] = {
-	{ 0x0001, KEY_1 },
-	{ 0x0002, KEY_2 },
-};
-
-/* remote control stuff (does not work with my box) */
-static int vp702x_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
-{
-	u8 *key;
-	int i;
-
-/* remove the following return to enabled remote querying */
-	return 0;
-
-	key = kmalloc(10, GFP_KERNEL);
-	if (!key)
-		return -ENOMEM;
-
-	vp702x_usb_in_op(d,READ_REMOTE_REQ,0,0,key,10);
-
-	deb_rc("remote query key: %x %d\n",key[1],key[1]);
-
-	if (key[1] == 0x44) {
-		*state = REMOTE_NO_KEY_PRESSED;
-		kfree(key);
-		return 0;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(rc_map_vp702x_table); i++)
-		if (rc5_custom(&rc_map_vp702x_table[i]) == key[1]) {
-			*state = REMOTE_KEY_PRESSED;
-			*event = rc_map_vp702x_table[i].keycode;
-			break;
-		}
-	kfree(key);
-	return 0;
-}
-
-
-static int vp702x_read_mac_addr(struct dvb_usb_device *d,u8 mac[6])
-{
-	u8 i, *buf;
-	struct vp702x_device_state *st = d->priv;
-
-	mutex_lock(&st->buf_mutex);
-	buf = st->buf;
-	for (i = 6; i < 12; i++)
-		vp702x_usb_in_op(d, READ_EEPROM_REQ, i, 1, &buf[i - 6], 1);
-
-	memcpy(mac, buf, 6);
-	mutex_unlock(&st->buf_mutex);
-	return 0;
-}
-
-static int vp702x_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	u8 buf[10] = { 0 };
-
-	vp702x_usb_out_op(adap->dev, SET_TUNER_POWER_REQ, 0, 7, NULL, 0);
-
-	if (vp702x_usb_inout_cmd(adap->dev, GET_SYSTEM_STRING, NULL, 0,
-				   buf, 10, 10))
-		return -EIO;
-
-	buf[9] = '\0';
-	info("system string: %s",&buf[1]);
-
-	vp702x_init_pid_filter(adap);
-
-	adap->fe_adap[0].fe = vp702x_fe_attach(adap->dev);
-	vp702x_usb_out_op(adap->dev, SET_TUNER_POWER_REQ, 1, 7, NULL, 0);
-
-	return 0;
-}
-
-static struct dvb_usb_device_properties vp702x_properties;
-
-static int vp702x_usb_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	struct dvb_usb_device *d;
-	struct vp702x_device_state *st;
-	int ret;
-
-	ret = dvb_usb_device_init(intf, &vp702x_properties,
-				   THIS_MODULE, &d, adapter_nr);
-	if (ret)
-		goto out;
-
-	st = d->priv;
-	st->buf_len = 16;
-	st->buf = kmalloc(st->buf_len, GFP_KERNEL);
-	if (!st->buf) {
-		ret = -ENOMEM;
-		dvb_usb_device_exit(intf);
-		goto out;
-	}
-	mutex_init(&st->buf_mutex);
-
-out:
-	return ret;
-
-}
-
-static void vp702x_usb_disconnect(struct usb_interface *intf)
-{
-	struct dvb_usb_device *d = usb_get_intfdata(intf);
-	struct vp702x_device_state *st = d->priv;
-	mutex_lock(&st->buf_mutex);
-	kfree(st->buf);
-	mutex_unlock(&st->buf_mutex);
-	dvb_usb_device_exit(intf);
-}
-
-static struct usb_device_id vp702x_usb_table [] = {
-	    { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7021_COLD) },
-//	    { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7020_COLD) },
-//	    { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7020_WARM) },
-	    { 0 },
-};
-MODULE_DEVICE_TABLE(usb, vp702x_usb_table);
-
-static struct dvb_usb_device_properties vp702x_properties = {
-	.usb_ctrl = CYPRESS_FX2,
-	.firmware            = "dvb-usb-vp702x-02.fw",
-	.no_reconnect        = 1,
-
-	.size_of_priv     = sizeof(struct vp702x_device_state),
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.caps             = DVB_USB_ADAP_RECEIVES_204_BYTE_TS,
-
-			.streaming_ctrl   = vp702x_streaming_ctrl,
-			.frontend_attach  = vp702x_frontend_attach,
-
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 10,
-				.endpoint = 0x02,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			},
-		}},
-			.size_of_priv     = sizeof(struct vp702x_adapter_state),
-		}
-	},
-	.read_mac_address = vp702x_read_mac_addr,
-
-	.rc.legacy = {
-		.rc_map_table       = rc_map_vp702x_table,
-		.rc_map_size  = ARRAY_SIZE(rc_map_vp702x_table),
-		.rc_interval      = 400,
-		.rc_query         = vp702x_rc_query,
-	},
-
-	.num_device_descs = 1,
-	.devices = {
-		{ .name = "TwinhanDTV StarBox DVB-S USB2.0 (VP7021)",
-		  .cold_ids = { &vp702x_usb_table[0], NULL },
-		  .warm_ids = { NULL },
-		},
-/*		{ .name = "TwinhanDTV StarBox DVB-S USB2.0 (VP7020)",
-		  .cold_ids = { &vp702x_usb_table[2], NULL },
-		  .warm_ids = { &vp702x_usb_table[3], NULL },
-		},
-*/		{ NULL },
-	}
-};
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver vp702x_usb_driver = {
-	.name		= "dvb_usb_vp702x",
-	.probe		= vp702x_usb_probe,
-	.disconnect	= vp702x_usb_disconnect,
-	.id_table	= vp702x_usb_table,
-};
-
-module_usb_driver(vp702x_usb_driver);
-
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
-MODULE_DESCRIPTION("Driver for Twinhan StarBox DVB-S USB2.0 and clones");
-MODULE_VERSION("1.0");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/vp702x.h b/drivers/media/dvb/dvb-usb/vp702x.h
deleted file mode 100644
index 20b9005..0000000
--- a/drivers/media/dvb/dvb-usb/vp702x.h
+++ /dev/null
@@ -1,113 +0,0 @@
-#ifndef _DVB_USB_VP7021_H_
-#define _DVB_USB_VP7021_H_
-
-#define DVB_USB_LOG_PREFIX "vp702x"
-#include "dvb-usb.h"
-
-extern int dvb_usb_vp702x_debug;
-#define deb_info(args...) dprintk(dvb_usb_vp702x_debug,0x01,args)
-#define deb_xfer(args...) dprintk(dvb_usb_vp702x_debug,0x02,args)
-#define deb_rc(args...)   dprintk(dvb_usb_vp702x_debug,0x04,args)
-#define deb_fe(args...)   dprintk(dvb_usb_vp702x_debug,0x08,args)
-
-/* commands are read and written with USB control messages */
-
-/* consecutive read/write operation */
-#define REQUEST_OUT		0xB2
-#define REQUEST_IN		0xB3
-
-/* the out-buffer of these consecutive operations contain sub-commands when b[0] = 0
- * request: 0xB2; i: 0; v: 0; b[0] = 0, b[1] = subcmd, additional buffer
- * the returning buffer looks as follows
- * request: 0xB3; i: 0; v: 0; b[0] = 0xB3, additional buffer */
-
-#define GET_TUNER_STATUS	0x05
-/* additional in buffer:
- * 0   1   2    3              4   5   6               7       8
- * N/A N/A 0x05 signal-quality N/A N/A signal-strength lock==0 N/A */
-
-#define GET_SYSTEM_STRING	0x06
-/* additional in buffer:
- * 0   1   2   3   4   5   6   7   8
- * N/A 'U' 'S' 'B' '7' '0' '2' 'X' N/A */
-
-#define SET_DISEQC_CMD		0x08
-/* additional out buffer:
- * 0    1  2  3  4
- * len  X1 X2 X3 X4
- * additional in buffer:
- * 0   1 2
- * N/A 0 0   b[1] == b[2] == 0 -> success, failure otherwise */
-
-#define SET_LNB_POWER		0x09
-/* additional out buffer:
- * 0    1    2
- * 0x00 0xff 1 = on, 0 = off
- * additional in buffer:
- * 0   1 2
- * N/A 0 0   b[1] == b[2] == 0 -> success failure otherwise */
-
-#define GET_MAC_ADDRESS		0x0A
-/* #define GET_MAC_ADDRESS   0x0B */
-/* additional in buffer:
- * 0   1   2            3    4    5    6    7    8
- * N/A N/A 0x0A or 0x0B MAC0 MAC1 MAC2 MAC3 MAC4 MAC5 */
-
-#define SET_PID_FILTER		0x11
-/* additional in buffer:
- * 0        1        ... 14       15       16
- * PID0_MSB PID0_LSB ... PID7_MSB PID7_LSB PID_active (bits) */
-
-/* request: 0xB2; i: 0; v: 0;
- * b[0] != 0 -> tune and lock a channel
- * 0     1     2       3      4      5      6    7
- * freq0 freq1 divstep srate0 srate1 srate2 flag chksum
- */
-
-/* one direction requests */
-#define READ_REMOTE_REQ		0xB4
-/* IN  i: 0; v: 0; b[0] == request, b[1] == key */
-
-#define READ_PID_NUMBER_REQ	0xB5
-/* IN  i: 0; v: 0; b[0] == request, b[1] == 0, b[2] = pid number */
-
-#define WRITE_EEPROM_REQ	0xB6
-/* OUT i: offset; v: value to write; no extra buffer */
-
-#define READ_EEPROM_REQ		0xB7
-/* IN  i: bufferlen; v: offset; buffer with bufferlen bytes */
-
-#define READ_STATUS		0xB8
-/* IN  i: 0; v: 0; bufferlen 10 */
-
-#define READ_TUNER_REG_REQ	0xB9
-/* IN  i: 0; v: register; b[0] = value */
-
-#define READ_FX2_REG_REQ	0xBA
-/* IN  i: offset; v: 0; b[0] = value */
-
-#define WRITE_FX2_REG_REQ	0xBB
-/* OUT i: offset; v: value to write; 1 byte extra buffer */
-
-#define SET_TUNER_POWER_REQ	0xBC
-/* IN  i: 0 = power off, 1 = power on */
-
-#define WRITE_TUNER_REG_REQ	0xBD
-/* IN  i: register, v: value to write, no extra buffer */
-
-#define RESET_TUNER		0xBE
-/* IN  i: 0, v: 0, no extra buffer */
-
-struct vp702x_device_state {
-	struct mutex buf_mutex;
-	int buf_len;
-	u8 *buf;
-};
-
-
-extern struct dvb_frontend * vp702x_fe_attach(struct dvb_usb_device *d);
-
-extern int vp702x_usb_inout_op(struct dvb_usb_device *d, u8 *o, int olen, u8 *i, int ilen, int msec);
-extern int vp702x_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
-
-#endif
diff --git a/drivers/media/dvb/dvb-usb/vp7045-fe.c b/drivers/media/dvb/dvb-usb/vp7045-fe.c
deleted file mode 100644
index b8825b1..0000000
--- a/drivers/media/dvb/dvb-usb/vp7045-fe.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/* DVB frontend part of the Linux driver for TwinhanDTV Alpha/MagicBoxII USB2.0
- * DVB-T receiver.
- *
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
- *
- * Thanks to Twinhan who kindly provided hardware and information.
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- *
- */
-#include "vp7045.h"
-
-/* It is a Zarlink MT352 within a Samsung Tuner (DNOS404ZH102A) - 040929 - AAT
- *
- * Programming is hidden inside the firmware, so set_frontend is very easy.
- * Even though there is a Firmware command that one can use to access the demod
- * via its registers. This is used for status information.
- */
-
-struct vp7045_fe_state {
-	struct dvb_frontend fe;
-	struct dvb_usb_device *d;
-};
-
-static int vp7045_fe_read_status(struct dvb_frontend* fe, fe_status_t *status)
-{
-	struct vp7045_fe_state *state = fe->demodulator_priv;
-	u8 s0 = vp7045_read_reg(state->d,0x00),
-	   s1 = vp7045_read_reg(state->d,0x01),
-	   s3 = vp7045_read_reg(state->d,0x03);
-
-	*status = 0;
-	if (s0 & (1 << 4))
-		*status |= FE_HAS_CARRIER;
-	if (s0 & (1 << 1))
-		*status |= FE_HAS_VITERBI;
-	if (s0 & (1 << 5))
-		*status |= FE_HAS_LOCK;
-	if (s1 & (1 << 1))
-		*status |= FE_HAS_SYNC;
-	if (s3 & (1 << 6))
-		*status |= FE_HAS_SIGNAL;
-
-	if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) !=
-			(FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC))
-		*status &= ~FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int vp7045_fe_read_ber(struct dvb_frontend* fe, u32 *ber)
-{
-	struct vp7045_fe_state *state = fe->demodulator_priv;
-	*ber = (vp7045_read_reg(state->d, 0x0D) << 16) |
-	       (vp7045_read_reg(state->d, 0x0E) << 8) |
-		vp7045_read_reg(state->d, 0x0F);
-	return 0;
-}
-
-static int vp7045_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
-{
-	struct vp7045_fe_state *state = fe->demodulator_priv;
-	*unc = (vp7045_read_reg(state->d, 0x10) << 8) |
-		    vp7045_read_reg(state->d, 0x11);
-	return 0;
-}
-
-static int vp7045_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
-{
-	struct vp7045_fe_state *state = fe->demodulator_priv;
-	u16 signal = (vp7045_read_reg(state->d, 0x14) << 8) |
-		vp7045_read_reg(state->d, 0x15);
-
-	*strength = ~signal;
-	return 0;
-}
-
-static int vp7045_fe_read_snr(struct dvb_frontend* fe, u16 *snr)
-{
-	struct vp7045_fe_state *state = fe->demodulator_priv;
-	u8 _snr = vp7045_read_reg(state->d, 0x09);
-	*snr = (_snr << 8) | _snr;
-	return 0;
-}
-
-static int vp7045_fe_init(struct dvb_frontend* fe)
-{
-	return 0;
-}
-
-static int vp7045_fe_sleep(struct dvb_frontend* fe)
-{
-	return 0;
-}
-
-static int vp7045_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
-{
-	tune->min_delay_ms = 800;
-	return 0;
-}
-
-static int vp7045_fe_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
-	struct vp7045_fe_state *state = fe->demodulator_priv;
-	u8 buf[5];
-	u32 freq = fep->frequency / 1000;
-
-	buf[0] = (freq >> 16) & 0xff;
-	buf[1] = (freq >>  8) & 0xff;
-	buf[2] =  freq        & 0xff;
-	buf[3] = 0;
-
-	switch (fep->bandwidth_hz) {
-	case 8000000:
-		buf[4] = 8;
-		break;
-	case 7000000:
-		buf[4] = 7;
-		break;
-	case 6000000:
-		buf[4] = 6;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	vp7045_usb_op(state->d,LOCK_TUNER_COMMAND,buf,5,NULL,0,200);
-	return 0;
-}
-
-static void vp7045_fe_release(struct dvb_frontend* fe)
-{
-	struct vp7045_fe_state *state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops vp7045_fe_ops;
-
-struct dvb_frontend * vp7045_fe_attach(struct dvb_usb_device *d)
-{
-	struct vp7045_fe_state *s = kzalloc(sizeof(struct vp7045_fe_state), GFP_KERNEL);
-	if (s == NULL)
-		goto error;
-
-	s->d = d;
-	memcpy(&s->fe.ops, &vp7045_fe_ops, sizeof(struct dvb_frontend_ops));
-	s->fe.demodulator_priv = s;
-
-	return &s->fe;
-error:
-	return NULL;
-}
-
-
-static struct dvb_frontend_ops vp7045_fe_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name			= "Twinhan VP7045/46 USB DVB-T",
-		.frequency_min		= 44250000,
-		.frequency_max		= 867250000,
-		.frequency_stepsize	= 1000,
-		.caps = FE_CAN_INVERSION_AUTO |
-				FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-				FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-				FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-				FE_CAN_TRANSMISSION_MODE_AUTO |
-				FE_CAN_GUARD_INTERVAL_AUTO |
-				FE_CAN_RECOVER |
-				FE_CAN_HIERARCHY_AUTO,
-	},
-
-	.release = vp7045_fe_release,
-
-	.init = vp7045_fe_init,
-	.sleep = vp7045_fe_sleep,
-
-	.set_frontend = vp7045_fe_set_frontend,
-	.get_tune_settings = vp7045_fe_get_tune_settings,
-
-	.read_status = vp7045_fe_read_status,
-	.read_ber = vp7045_fe_read_ber,
-	.read_signal_strength = vp7045_fe_read_signal_strength,
-	.read_snr = vp7045_fe_read_snr,
-	.read_ucblocks = vp7045_fe_read_unc_blocks,
-};
diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c
deleted file mode 100644
index d750724..0000000
--- a/drivers/media/dvb/dvb-usb/vp7045.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/* DVB USB compliant Linux driver for the
- *  - TwinhanDTV Alpha/MagicBoxII USB2.0 DVB-T receiver
- *  - DigitalNow TinyUSB2 DVB-t receiver
- *
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
- *
- * Thanks to Twinhan who kindly provided hardware and information.
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#include "vp7045.h"
-
-/* debug */
-static int dvb_usb_vp7045_debug;
-module_param_named(debug,dvb_usb_vp7045_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS);
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-#define deb_info(args...) dprintk(dvb_usb_vp7045_debug,0x01,args)
-#define deb_xfer(args...) dprintk(dvb_usb_vp7045_debug,0x02,args)
-#define deb_rc(args...)   dprintk(dvb_usb_vp7045_debug,0x04,args)
-
-int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in, int inlen, int msec)
-{
-	int ret = 0;
-	u8 *buf = d->priv;
-
-	buf[0] = cmd;
-
-	if (outlen > 19)
-		outlen = 19;
-
-	if (inlen > 11)
-		inlen = 11;
-
-	ret = mutex_lock_interruptible(&d->usb_mutex);
-	if (ret)
-		return ret;
-
-	if (out != NULL && outlen > 0)
-		memcpy(&buf[1], out, outlen);
-
-	deb_xfer("out buffer: ");
-	debug_dump(buf, outlen+1, deb_xfer);
-
-
-	if (usb_control_msg(d->udev,
-			usb_sndctrlpipe(d->udev,0),
-			TH_COMMAND_OUT, USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0,
-			buf, 20, 2000) != 20) {
-		err("USB control message 'out' went wrong.");
-		ret = -EIO;
-		goto unlock;
-	}
-
-	msleep(msec);
-
-	if (usb_control_msg(d->udev,
-			usb_rcvctrlpipe(d->udev,0),
-			TH_COMMAND_IN, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
-			buf, 12, 2000) != 12) {
-		err("USB control message 'in' went wrong.");
-		ret = -EIO;
-		goto unlock;
-	}
-
-	deb_xfer("in buffer: ");
-	debug_dump(buf, 12, deb_xfer);
-
-	if (in != NULL && inlen > 0)
-		memcpy(in, &buf[1], inlen);
-
-unlock:
-	mutex_unlock(&d->usb_mutex);
-
-	return ret;
-}
-
-u8 vp7045_read_reg(struct dvb_usb_device *d, u8 reg)
-{
-	u8 obuf[2] = { 0 },v;
-	obuf[1] = reg;
-
-	vp7045_usb_op(d,TUNER_REG_READ,obuf,2,&v,1,30);
-
-	return v;
-}
-
-static int vp7045_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	u8 v = onoff;
-	return vp7045_usb_op(d,SET_TUNER_POWER,&v,1,NULL,0,150);
-}
-
-/* remote control stuff */
-
-/* The keymapping struct. Somehow this should be loaded to the driver, but
- * currently it is hardcoded. */
-static struct rc_map_table rc_map_vp7045_table[] = {
-	{ 0x0016, KEY_POWER },
-	{ 0x0010, KEY_MUTE },
-	{ 0x0003, KEY_1 },
-	{ 0x0001, KEY_2 },
-	{ 0x0006, KEY_3 },
-	{ 0x0009, KEY_4 },
-	{ 0x001d, KEY_5 },
-	{ 0x001f, KEY_6 },
-	{ 0x000d, KEY_7 },
-	{ 0x0019, KEY_8 },
-	{ 0x001b, KEY_9 },
-	{ 0x0015, KEY_0 },
-	{ 0x0005, KEY_CHANNELUP },
-	{ 0x0002, KEY_CHANNELDOWN },
-	{ 0x001e, KEY_VOLUMEUP },
-	{ 0x000a, KEY_VOLUMEDOWN },
-	{ 0x0011, KEY_RECORD },
-	{ 0x0017, KEY_FAVORITES }, /* Heart symbol - Channel list. */
-	{ 0x0014, KEY_PLAY },
-	{ 0x001a, KEY_STOP },
-	{ 0x0040, KEY_REWIND },
-	{ 0x0012, KEY_FASTFORWARD },
-	{ 0x000e, KEY_PREVIOUS }, /* Recall - Previous channel. */
-	{ 0x004c, KEY_PAUSE },
-	{ 0x004d, KEY_SCREEN }, /* Full screen mode. */
-	{ 0x0054, KEY_AUDIO }, /* MTS - Switch to secondary audio. */
-	{ 0x000c, KEY_CANCEL }, /* Cancel */
-	{ 0x001c, KEY_EPG }, /* EPG */
-	{ 0x0000, KEY_TAB }, /* Tab */
-	{ 0x0048, KEY_INFO }, /* Preview */
-	{ 0x0004, KEY_LIST }, /* RecordList */
-	{ 0x000f, KEY_TEXT }, /* Teletext */
-	{ 0x0041, KEY_PREVIOUSSONG },
-	{ 0x0042, KEY_NEXTSONG },
-	{ 0x004b, KEY_UP },
-	{ 0x0051, KEY_DOWN },
-	{ 0x004e, KEY_LEFT },
-	{ 0x0052, KEY_RIGHT },
-	{ 0x004f, KEY_ENTER },
-	{ 0x0013, KEY_CANCEL },
-	{ 0x004a, KEY_CLEAR },
-	{ 0x0054, KEY_PRINT }, /* Capture */
-	{ 0x0043, KEY_SUBTITLE }, /* Subtitle/CC */
-	{ 0x0008, KEY_VIDEO }, /* A/V */
-	{ 0x0007, KEY_SLEEP }, /* Hibernate */
-	{ 0x0045, KEY_ZOOM }, /* Zoom+ */
-	{ 0x0018, KEY_RED},
-	{ 0x0053, KEY_GREEN},
-	{ 0x005e, KEY_YELLOW},
-	{ 0x005f, KEY_BLUE}
-};
-
-static int vp7045_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
-{
-	u8 key;
-	int i;
-	vp7045_usb_op(d,RC_VAL_READ,NULL,0,&key,1,20);
-
-	deb_rc("remote query key: %x %d\n",key,key);
-
-	if (key == 0x44) {
-		*state = REMOTE_NO_KEY_PRESSED;
-		return 0;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(rc_map_vp7045_table); i++)
-		if (rc5_data(&rc_map_vp7045_table[i]) == key) {
-			*state = REMOTE_KEY_PRESSED;
-			*event = rc_map_vp7045_table[i].keycode;
-			break;
-		}
-	return 0;
-}
-
-static int vp7045_read_eeprom(struct dvb_usb_device *d,u8 *buf, int len, int offset)
-{
-	int i = 0;
-	u8 v,br[2];
-	for (i=0; i < len; i++) {
-		v = offset + i;
-		vp7045_usb_op(d,GET_EE_VALUE,&v,1,br,2,5);
-		buf[i] = br[1];
-	}
-	deb_info("VP7045 EEPROM read (offs: %d, len: %d) : ",offset, i);
-	debug_dump(buf,i,deb_info);
-	return 0;
-}
-
-static int vp7045_read_mac_addr(struct dvb_usb_device *d,u8 mac[6])
-{
-	return vp7045_read_eeprom(d,mac, 6, MAC_0_ADDR);
-}
-
-static int vp7045_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	u8 buf[255] = { 0 };
-
-	vp7045_usb_op(adap->dev,VENDOR_STRING_READ,NULL,0,buf,20,0);
-	buf[10] = '\0';
-	deb_info("firmware says: %s ",buf);
-
-	vp7045_usb_op(adap->dev,PRODUCT_STRING_READ,NULL,0,buf,20,0);
-	buf[10] = '\0';
-	deb_info("%s ",buf);
-
-	vp7045_usb_op(adap->dev,FW_VERSION_READ,NULL,0,buf,20,0);
-	buf[10] = '\0';
-	deb_info("v%s\n",buf);
-
-/*	Dump the EEPROM */
-/*	vp7045_read_eeprom(d,buf, 255, FX2_ID_ADDR); */
-
-	adap->fe_adap[0].fe = vp7045_fe_attach(adap->dev);
-
-	return 0;
-}
-
-static struct dvb_usb_device_properties vp7045_properties;
-
-static int vp7045_usb_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	return dvb_usb_device_init(intf, &vp7045_properties,
-				   THIS_MODULE, NULL, adapter_nr);
-}
-
-static struct usb_device_id vp7045_usb_table [] = {
-	    { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7045_COLD) },
-	    { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7045_WARM) },
-	    { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_DNTV_TINYUSB2_COLD) },
-	    { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_DNTV_TINYUSB2_WARM) },
-	    { 0 },
-};
-MODULE_DEVICE_TABLE(usb, vp7045_usb_table);
-
-static struct dvb_usb_device_properties vp7045_properties = {
-	.usb_ctrl = CYPRESS_FX2,
-	.firmware = "dvb-usb-vp7045-01.fw",
-	.size_of_priv = 20,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.frontend_attach  = vp7045_frontend_attach,
-			/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-				.count = 7,
-				.endpoint = 0x02,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			},
-		}},
-		}
-	},
-	.power_ctrl       = vp7045_power_ctrl,
-	.read_mac_address = vp7045_read_mac_addr,
-
-	.rc.legacy = {
-		.rc_interval      = 400,
-		.rc_map_table       = rc_map_vp7045_table,
-		.rc_map_size  = ARRAY_SIZE(rc_map_vp7045_table),
-		.rc_query         = vp7045_rc_query,
-	},
-
-	.num_device_descs = 2,
-	.devices = {
-		{ .name = "Twinhan USB2.0 DVB-T receiver (TwinhanDTV Alpha/MagicBox II)",
-		  .cold_ids = { &vp7045_usb_table[0], NULL },
-		  .warm_ids = { &vp7045_usb_table[1], NULL },
-		},
-		{ .name = "DigitalNow TinyUSB 2 DVB-t Receiver",
-		  .cold_ids = { &vp7045_usb_table[2], NULL },
-		  .warm_ids = { &vp7045_usb_table[3], NULL },
-		},
-		{ NULL },
-	}
-};
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver vp7045_usb_driver = {
-	.name		= "dvb_usb_vp7045",
-	.probe		= vp7045_usb_probe,
-	.disconnect	= dvb_usb_device_exit,
-	.id_table	= vp7045_usb_table,
-};
-
-module_usb_driver(vp7045_usb_driver);
-
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
-MODULE_DESCRIPTION("Driver for Twinhan MagicBox/Alpha and DNTV tinyUSB2 DVB-T USB2.0");
-MODULE_VERSION("1.0");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/vp7045.h b/drivers/media/dvb/dvb-usb/vp7045.h
deleted file mode 100644
index cf5ec46..0000000
--- a/drivers/media/dvb/dvb-usb/vp7045.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* Common header-file of the Linux driver for the TwinhanDTV Alpha/MagicBoxII
- * USB2.0 DVB-T receiver.
- *
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
- *
- * Thanks to Twinhan who kindly provided hardware and information.
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#ifndef _DVB_USB_VP7045_H_
-#define _DVB_USB_VP7045_H_
-
-#define DVB_USB_LOG_PREFIX "vp7045"
-#include "dvb-usb.h"
-
-/* vp7045 commands */
-
-/* Twinhan Vendor requests */
-#define TH_COMMAND_IN                     0xC0
-#define TH_COMMAND_OUT                    0xC1
-
-/* command bytes */
-#define TUNER_REG_READ                    0x03
-#define TUNER_REG_WRITE                   0x04
-
-#define RC_VAL_READ                       0x05
- #define RC_NO_KEY                        0x44
-
-#define SET_TUNER_POWER                   0x06
-#define CHECK_TUNER_POWER                 0x12
- #define Tuner_Power_ON                   1
- #define Tuner_Power_OFF                  0
-
-#define GET_USB_SPEED                     0x07
-
-#define LOCK_TUNER_COMMAND                0x09
-
-#define TUNER_SIGNAL_READ                 0x0A
-
-/* FX2 eeprom */
-#define SET_EE_VALUE                      0x10
-#define GET_EE_VALUE                      0x11
- #define FX2_ID_ADDR                      0x00
- #define VID_MSB_ADDR                     0x02
- #define VID_LSB_ADDR                     0x01
- #define PID_MSB_ADDR                     0x04
- #define PID_LSB_ADDR                     0x03
- #define MAC_0_ADDR                       0x07
- #define MAC_1_ADDR                       0x08
- #define MAC_2_ADDR                       0x09
- #define MAC_3_ADDR                       0x0a
- #define MAC_4_ADDR                       0x0b
- #define MAC_5_ADDR                       0x0c
-
-#define RESET_FX2                         0x13
-
-#define FW_VERSION_READ                   0x0B
-#define VENDOR_STRING_READ                0x0C
-#define PRODUCT_STRING_READ               0x0D
-#define FW_BCD_VERSION_READ               0x14
-
-extern struct dvb_frontend * vp7045_fe_attach(struct dvb_usb_device *d);
-extern int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in, int inlen,int msec);
-extern u8 vp7045_read_reg(struct dvb_usb_device *d, u8 reg);
-
-#endif
diff --git a/drivers/media/dvb/firewire/Kconfig b/drivers/media/dvb/firewire/Kconfig
deleted file mode 100644
index f3e9448..0000000
--- a/drivers/media/dvb/firewire/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-config DVB_FIREDTV
-	tristate "FireDTV and FloppyDTV"
-	depends on DVB_CORE && FIREWIRE
-	help
-	  Support for DVB receivers from Digital Everywhere
-	  which are connected via IEEE 1394 (FireWire).
-
-	  These devices don't have an MPEG decoder built in,
-	  so you need an external software decoder to watch TV.
-
-	  To compile this driver as a module, say M here:
-	  the module will be called firedtv.
-
-if DVB_FIREDTV
-
-config DVB_FIREDTV_INPUT
-	def_bool INPUT = y || (INPUT = m && DVB_FIREDTV = m)
-
-endif # DVB_FIREDTV
diff --git a/drivers/media/dvb/firewire/Makefile b/drivers/media/dvb/firewire/Makefile
deleted file mode 100644
index 357b3aa..0000000
--- a/drivers/media/dvb/firewire/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-obj-$(CONFIG_DVB_FIREDTV) += firedtv.o
-
-firedtv-y := firedtv-avc.o firedtv-ci.o firedtv-dvb.o firedtv-fe.o firedtv-fw.o
-firedtv-$(CONFIG_DVB_FIREDTV_INPUT)    += firedtv-rc.o
-
-ccflags-y += -Idrivers/media/dvb/dvb-core
diff --git a/drivers/media/dvb/firewire/firedtv-avc.c b/drivers/media/dvb/firewire/firedtv-avc.c
deleted file mode 100644
index d1a1a13..0000000
--- a/drivers/media/dvb/firewire/firedtv-avc.c
+++ /dev/null
@@ -1,1457 +0,0 @@
-/*
- * FireDTV driver (formerly known as FireSAT)
- *
- * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
- * Copyright (C) 2008 Ben Backx <ben@bbackx.com>
- * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation; either version 2 of
- *	the License, or (at your option) any later version.
- */
-
-#include <linux/bug.h>
-#include <linux/crc32.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/jiffies.h>
-#include <linux/kernel.h>
-#include <linux/moduleparam.h>
-#include <linux/mutex.h>
-#include <linux/string.h>
-#include <linux/stringify.h>
-#include <linux/wait.h>
-#include <linux/workqueue.h>
-
-#include <dvb_frontend.h>
-
-#include "firedtv.h"
-
-#define FCP_COMMAND_REGISTER		0xfffff0000b00ULL
-
-#define AVC_CTYPE_CONTROL		0x0
-#define AVC_CTYPE_STATUS		0x1
-#define AVC_CTYPE_NOTIFY		0x3
-
-#define AVC_RESPONSE_ACCEPTED		0x9
-#define AVC_RESPONSE_STABLE		0xc
-#define AVC_RESPONSE_CHANGED		0xd
-#define AVC_RESPONSE_INTERIM		0xf
-
-#define AVC_SUBUNIT_TYPE_TUNER		(0x05 << 3)
-#define AVC_SUBUNIT_TYPE_UNIT		(0x1f << 3)
-
-#define AVC_OPCODE_VENDOR		0x00
-#define AVC_OPCODE_READ_DESCRIPTOR	0x09
-#define AVC_OPCODE_DSIT			0xc8
-#define AVC_OPCODE_DSD			0xcb
-
-#define DESCRIPTOR_TUNER_STATUS 	0x80
-#define DESCRIPTOR_SUBUNIT_IDENTIFIER	0x00
-
-#define SFE_VENDOR_DE_COMPANYID_0	0x00 /* OUI of Digital Everywhere */
-#define SFE_VENDOR_DE_COMPANYID_1	0x12
-#define SFE_VENDOR_DE_COMPANYID_2	0x87
-
-#define SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL 0x0a
-#define SFE_VENDOR_OPCODE_LNB_CONTROL		0x52
-#define SFE_VENDOR_OPCODE_TUNE_QPSK		0x58 /* for DVB-S */
-
-#define SFE_VENDOR_OPCODE_GET_FIRMWARE_VERSION	0x00
-#define SFE_VENDOR_OPCODE_HOST2CA		0x56
-#define SFE_VENDOR_OPCODE_CA2HOST		0x57
-#define SFE_VENDOR_OPCODE_CISTATUS		0x59
-#define SFE_VENDOR_OPCODE_TUNE_QPSK2		0x60 /* for DVB-S2 */
-
-#define SFE_VENDOR_TAG_CA_RESET			0x00
-#define SFE_VENDOR_TAG_CA_APPLICATION_INFO	0x01
-#define SFE_VENDOR_TAG_CA_PMT			0x02
-#define SFE_VENDOR_TAG_CA_DATE_TIME		0x04
-#define SFE_VENDOR_TAG_CA_MMI			0x05
-#define SFE_VENDOR_TAG_CA_ENTER_MENU		0x07
-
-#define EN50221_LIST_MANAGEMENT_ONLY	0x03
-#define EN50221_TAG_APP_INFO		0x9f8021
-#define EN50221_TAG_CA_INFO		0x9f8031
-
-struct avc_command_frame {
-	u8 ctype;
-	u8 subunit;
-	u8 opcode;
-	u8 operand[509];
-};
-
-struct avc_response_frame {
-	u8 response;
-	u8 subunit;
-	u8 opcode;
-	u8 operand[509];
-};
-
-#define LAST_OPERAND (509 - 1)
-
-static inline void clear_operands(struct avc_command_frame *c, int from, int to)
-{
-	memset(&c->operand[from], 0, to - from + 1);
-}
-
-static void pad_operands(struct avc_command_frame *c, int from)
-{
-	int to = ALIGN(from, 4);
-
-	if (from <= to && to <= LAST_OPERAND)
-		clear_operands(c, from, to);
-}
-
-#define AVC_DEBUG_READ_DESCRIPTOR              0x0001
-#define AVC_DEBUG_DSIT                         0x0002
-#define AVC_DEBUG_DSD                          0x0004
-#define AVC_DEBUG_REGISTER_REMOTE_CONTROL      0x0008
-#define AVC_DEBUG_LNB_CONTROL                  0x0010
-#define AVC_DEBUG_TUNE_QPSK                    0x0020
-#define AVC_DEBUG_TUNE_QPSK2                   0x0040
-#define AVC_DEBUG_HOST2CA                      0x0080
-#define AVC_DEBUG_CA2HOST                      0x0100
-#define AVC_DEBUG_APPLICATION_PMT              0x4000
-#define AVC_DEBUG_FCP_PAYLOADS                 0x8000
-
-static int avc_debug;
-module_param_named(debug, avc_debug, int, 0644);
-MODULE_PARM_DESC(debug, "Verbose logging (none = 0"
-	", FCP subactions"
-	": READ DESCRIPTOR = "		__stringify(AVC_DEBUG_READ_DESCRIPTOR)
-	", DSIT = "			__stringify(AVC_DEBUG_DSIT)
-	", REGISTER_REMOTE_CONTROL = "	__stringify(AVC_DEBUG_REGISTER_REMOTE_CONTROL)
-	", LNB CONTROL = "		__stringify(AVC_DEBUG_LNB_CONTROL)
-	", TUNE QPSK = "		__stringify(AVC_DEBUG_TUNE_QPSK)
-	", TUNE QPSK2 = "		__stringify(AVC_DEBUG_TUNE_QPSK2)
-	", HOST2CA = "			__stringify(AVC_DEBUG_HOST2CA)
-	", CA2HOST = "			__stringify(AVC_DEBUG_CA2HOST)
-	"; Application sent PMT = "	__stringify(AVC_DEBUG_APPLICATION_PMT)
-	", FCP payloads = "		__stringify(AVC_DEBUG_FCP_PAYLOADS)
-	", or a combination, or all = -1)");
-
-/*
- * This is a workaround since there is no vendor specific command to retrieve
- * ca_info using AVC. If this parameter is not used, ca_system_id will be
- * filled with application_manufacturer from ca_app_info.
- * Digital Everywhere have said that adding ca_info is on their TODO list.
- */
-static unsigned int num_fake_ca_system_ids;
-static int fake_ca_system_ids[4] = { -1, -1, -1, -1 };
-module_param_array(fake_ca_system_ids, int, &num_fake_ca_system_ids, 0644);
-MODULE_PARM_DESC(fake_ca_system_ids, "If your CAM application manufacturer "
-		 "does not have the same ca_system_id as your CAS, you can "
-		 "override what ca_system_ids are presented to the "
-		 "application by setting this field to an array of ids.");
-
-static const char *debug_fcp_ctype(unsigned int ctype)
-{
-	static const char *ctypes[] = {
-		[0x0] = "CONTROL",		[0x1] = "STATUS",
-		[0x2] = "SPECIFIC INQUIRY",	[0x3] = "NOTIFY",
-		[0x4] = "GENERAL INQUIRY",	[0x8] = "NOT IMPLEMENTED",
-		[0x9] = "ACCEPTED",		[0xa] = "REJECTED",
-		[0xb] = "IN TRANSITION",	[0xc] = "IMPLEMENTED/STABLE",
-		[0xd] = "CHANGED",		[0xf] = "INTERIM",
-	};
-	const char *ret = ctype < ARRAY_SIZE(ctypes) ? ctypes[ctype] : NULL;
-
-	return ret ? ret : "?";
-}
-
-static const char *debug_fcp_opcode(unsigned int opcode,
-				    const u8 *data, int length)
-{
-	switch (opcode) {
-	case AVC_OPCODE_VENDOR:
-		break;
-	case AVC_OPCODE_READ_DESCRIPTOR:
-		return avc_debug & AVC_DEBUG_READ_DESCRIPTOR ?
-				"ReadDescriptor" : NULL;
-	case AVC_OPCODE_DSIT:
-		return avc_debug & AVC_DEBUG_DSIT ?
-				"DirectSelectInfo.Type" : NULL;
-	case AVC_OPCODE_DSD:
-		return avc_debug & AVC_DEBUG_DSD ? "DirectSelectData" : NULL;
-	default:
-		return "Unknown";
-	}
-
-	if (length < 7 ||
-	    data[3] != SFE_VENDOR_DE_COMPANYID_0 ||
-	    data[4] != SFE_VENDOR_DE_COMPANYID_1 ||
-	    data[5] != SFE_VENDOR_DE_COMPANYID_2)
-		return "Vendor/Unknown";
-
-	switch (data[6]) {
-	case SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL:
-		return avc_debug & AVC_DEBUG_REGISTER_REMOTE_CONTROL ?
-				"RegisterRC" : NULL;
-	case SFE_VENDOR_OPCODE_LNB_CONTROL:
-		return avc_debug & AVC_DEBUG_LNB_CONTROL ? "LNBControl" : NULL;
-	case SFE_VENDOR_OPCODE_TUNE_QPSK:
-		return avc_debug & AVC_DEBUG_TUNE_QPSK ? "TuneQPSK" : NULL;
-	case SFE_VENDOR_OPCODE_TUNE_QPSK2:
-		return avc_debug & AVC_DEBUG_TUNE_QPSK2 ? "TuneQPSK2" : NULL;
-	case SFE_VENDOR_OPCODE_HOST2CA:
-		return avc_debug & AVC_DEBUG_HOST2CA ? "Host2CA" : NULL;
-	case SFE_VENDOR_OPCODE_CA2HOST:
-		return avc_debug & AVC_DEBUG_CA2HOST ? "CA2Host" : NULL;
-	}
-	return "Vendor/Unknown";
-}
-
-static void debug_fcp(const u8 *data, int length)
-{
-	unsigned int subunit_type, subunit_id, opcode;
-	const char *op, *prefix;
-
-	prefix       = data[0] > 7 ? "FCP <- " : "FCP -> ";
-	subunit_type = data[1] >> 3;
-	subunit_id   = data[1] & 7;
-	opcode       = subunit_type == 0x1e || subunit_id == 5 ? ~0 : data[2];
-	op           = debug_fcp_opcode(opcode, data, length);
-
-	if (op) {
-		printk(KERN_INFO "%ssu=%x.%x l=%d: %-8s - %s\n",
-		       prefix, subunit_type, subunit_id, length,
-		       debug_fcp_ctype(data[0]), op);
-		if (avc_debug & AVC_DEBUG_FCP_PAYLOADS)
-			print_hex_dump(KERN_INFO, prefix, DUMP_PREFIX_NONE,
-				       16, 1, data, length, false);
-	}
-}
-
-static void debug_pmt(char *msg, int length)
-{
-	printk(KERN_INFO "APP PMT -> l=%d\n", length);
-	print_hex_dump(KERN_INFO, "APP PMT -> ", DUMP_PREFIX_NONE,
-		       16, 1, msg, length, false);
-}
-
-static int avc_write(struct firedtv *fdtv)
-{
-	int err, retry;
-
-	fdtv->avc_reply_received = false;
-
-	for (retry = 0; retry < 6; retry++) {
-		if (unlikely(avc_debug))
-			debug_fcp(fdtv->avc_data, fdtv->avc_data_length);
-
-		err = fdtv_write(fdtv, FCP_COMMAND_REGISTER,
-				 fdtv->avc_data, fdtv->avc_data_length);
-		if (err) {
-			dev_err(fdtv->device, "FCP command write failed\n");
-
-			return err;
-		}
-
-		/*
-		 * AV/C specs say that answers should be sent within 150 ms.
-		 * Time out after 200 ms.
-		 */
-		if (wait_event_timeout(fdtv->avc_wait,
-				       fdtv->avc_reply_received,
-				       msecs_to_jiffies(200)) != 0)
-			return 0;
-	}
-	dev_err(fdtv->device, "FCP response timed out\n");
-
-	return -ETIMEDOUT;
-}
-
-static bool is_register_rc(struct avc_response_frame *r)
-{
-	return r->opcode     == AVC_OPCODE_VENDOR &&
-	       r->operand[0] == SFE_VENDOR_DE_COMPANYID_0 &&
-	       r->operand[1] == SFE_VENDOR_DE_COMPANYID_1 &&
-	       r->operand[2] == SFE_VENDOR_DE_COMPANYID_2 &&
-	       r->operand[3] == SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL;
-}
-
-int avc_recv(struct firedtv *fdtv, void *data, size_t length)
-{
-	struct avc_response_frame *r = data;
-
-	if (unlikely(avc_debug))
-		debug_fcp(data, length);
-
-	if (length >= 8 && is_register_rc(r)) {
-		switch (r->response) {
-		case AVC_RESPONSE_CHANGED:
-			fdtv_handle_rc(fdtv, r->operand[4] << 8 | r->operand[5]);
-			schedule_work(&fdtv->remote_ctrl_work);
-			break;
-		case AVC_RESPONSE_INTERIM:
-			if (is_register_rc((void *)fdtv->avc_data))
-				goto wake;
-			break;
-		default:
-			dev_info(fdtv->device,
-				 "remote control result = %d\n", r->response);
-		}
-		return 0;
-	}
-
-	if (fdtv->avc_reply_received) {
-		dev_err(fdtv->device, "out-of-order AVC response, ignored\n");
-		return -EIO;
-	}
-
-	memcpy(fdtv->avc_data, data, length);
-	fdtv->avc_data_length = length;
-wake:
-	fdtv->avc_reply_received = true;
-	wake_up(&fdtv->avc_wait);
-
-	return 0;
-}
-
-static int add_pid_filter(struct firedtv *fdtv, u8 *operand)
-{
-	int i, n, pos = 1;
-
-	for (i = 0, n = 0; i < 16; i++) {
-		if (test_bit(i, &fdtv->channel_active)) {
-			operand[pos++] = 0x13; /* flowfunction relay */
-			operand[pos++] = 0x80; /* dsd_sel_spec_valid_flags -> PID */
-			operand[pos++] = (fdtv->channel_pid[i] >> 8) & 0x1f;
-			operand[pos++] = fdtv->channel_pid[i] & 0xff;
-			operand[pos++] = 0x00; /* tableID */
-			operand[pos++] = 0x00; /* filter_length */
-			n++;
-		}
-	}
-	operand[0] = n;
-
-	return pos;
-}
-
-/*
- * tuning command for setting the relative LNB frequency
- * (not supported by the AVC standard)
- */
-static int avc_tuner_tuneqpsk(struct firedtv *fdtv,
-			      struct dtv_frontend_properties *p)
-{
-	struct avc_command_frame *c = (void *)fdtv->avc_data;
-
-	c->opcode = AVC_OPCODE_VENDOR;
-
-	c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
-	c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
-	c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
-	if (fdtv->type == FIREDTV_DVB_S2)
-		c->operand[3] = SFE_VENDOR_OPCODE_TUNE_QPSK2;
-	else
-		c->operand[3] = SFE_VENDOR_OPCODE_TUNE_QPSK;
-
-	c->operand[4] = (p->frequency >> 24) & 0xff;
-	c->operand[5] = (p->frequency >> 16) & 0xff;
-	c->operand[6] = (p->frequency >> 8) & 0xff;
-	c->operand[7] = p->frequency & 0xff;
-
-	c->operand[8] = ((p->symbol_rate / 1000) >> 8) & 0xff;
-	c->operand[9] = (p->symbol_rate / 1000) & 0xff;
-
-	switch (p->fec_inner) {
-	case FEC_1_2:	c->operand[10] = 0x1; break;
-	case FEC_2_3:	c->operand[10] = 0x2; break;
-	case FEC_3_4:	c->operand[10] = 0x3; break;
-	case FEC_5_6:	c->operand[10] = 0x4; break;
-	case FEC_7_8:	c->operand[10] = 0x5; break;
-	case FEC_4_5:
-	case FEC_8_9:
-	case FEC_AUTO:
-	default:	c->operand[10] = 0x0;
-	}
-
-	if (fdtv->voltage == 0xff)
-		c->operand[11] = 0xff;
-	else if (fdtv->voltage == SEC_VOLTAGE_18) /* polarisation */
-		c->operand[11] = 0;
-	else
-		c->operand[11] = 1;
-
-	if (fdtv->tone == 0xff)
-		c->operand[12] = 0xff;
-	else if (fdtv->tone == SEC_TONE_ON) /* band */
-		c->operand[12] = 1;
-	else
-		c->operand[12] = 0;
-
-	if (fdtv->type == FIREDTV_DVB_S2) {
-		if (fdtv->fe.dtv_property_cache.delivery_system == SYS_DVBS2) {
-			switch (fdtv->fe.dtv_property_cache.modulation) {
-			case QAM_16:		c->operand[13] = 0x1; break;
-			case QPSK:		c->operand[13] = 0x2; break;
-			case PSK_8:		c->operand[13] = 0x3; break;
-			default:		c->operand[13] = 0x2; break;
-			}
-			switch (fdtv->fe.dtv_property_cache.rolloff) {
-			case ROLLOFF_35:	c->operand[14] = 0x2; break;
-			case ROLLOFF_20:	c->operand[14] = 0x0; break;
-			case ROLLOFF_25:	c->operand[14] = 0x1; break;
-			case ROLLOFF_AUTO:
-			default:		c->operand[14] = 0x2; break;
-			/* case ROLLOFF_NONE:	c->operand[14] = 0xff; break; */
-			}
-			switch (fdtv->fe.dtv_property_cache.pilot) {
-			case PILOT_AUTO:	c->operand[15] = 0x0; break;
-			case PILOT_OFF:		c->operand[15] = 0x0; break;
-			case PILOT_ON:		c->operand[15] = 0x1; break;
-			}
-		} else {
-			c->operand[13] = 0x1;  /* auto modulation */
-			c->operand[14] = 0xff; /* disable rolloff */
-			c->operand[15] = 0xff; /* disable pilot */
-		}
-		return 16;
-	} else {
-		return 13;
-	}
-}
-
-static int avc_tuner_dsd_dvb_c(struct firedtv *fdtv,
-			       struct dtv_frontend_properties *p)
-{
-	struct avc_command_frame *c = (void *)fdtv->avc_data;
-
-	c->opcode = AVC_OPCODE_DSD;
-
-	c->operand[0] = 0;    /* source plug */
-	c->operand[1] = 0xd2; /* subfunction replace */
-	c->operand[2] = 0x20; /* system id = DVB */
-	c->operand[3] = 0x00; /* antenna number */
-	c->operand[4] = 0x11; /* system_specific_multiplex selection_length */
-
-	/* multiplex_valid_flags, high byte */
-	c->operand[5] =   0 << 7 /* reserved */
-			| 0 << 6 /* Polarisation */
-			| 0 << 5 /* Orbital_Pos */
-			| 1 << 4 /* Frequency */
-			| 1 << 3 /* Symbol_Rate */
-			| 0 << 2 /* FEC_outer */
-			| (p->fec_inner  != FEC_AUTO ? 1 << 1 : 0)
-			| (p->modulation != QAM_AUTO ? 1 << 0 : 0);
-
-	/* multiplex_valid_flags, low byte */
-	c->operand[6] =   0 << 7 /* NetworkID */
-			| 0 << 0 /* reserved */ ;
-
-	c->operand[7]  = 0x00;
-	c->operand[8]  = 0x00;
-	c->operand[9]  = 0x00;
-	c->operand[10] = 0x00;
-
-	c->operand[11] = (((p->frequency / 4000) >> 16) & 0xff) | (2 << 6);
-	c->operand[12] = ((p->frequency / 4000) >> 8) & 0xff;
-	c->operand[13] = (p->frequency / 4000) & 0xff;
-	c->operand[14] = ((p->symbol_rate / 1000) >> 12) & 0xff;
-	c->operand[15] = ((p->symbol_rate / 1000) >> 4) & 0xff;
-	c->operand[16] = ((p->symbol_rate / 1000) << 4) & 0xf0;
-	c->operand[17] = 0x00;
-
-	switch (p->fec_inner) {
-	case FEC_1_2:	c->operand[18] = 0x1; break;
-	case FEC_2_3:	c->operand[18] = 0x2; break;
-	case FEC_3_4:	c->operand[18] = 0x3; break;
-	case FEC_5_6:	c->operand[18] = 0x4; break;
-	case FEC_7_8:	c->operand[18] = 0x5; break;
-	case FEC_8_9:	c->operand[18] = 0x6; break;
-	case FEC_4_5:	c->operand[18] = 0x8; break;
-	case FEC_AUTO:
-	default:	c->operand[18] = 0x0;
-	}
-
-	switch (p->modulation) {
-	case QAM_16:	c->operand[19] = 0x08; break;
-	case QAM_32:	c->operand[19] = 0x10; break;
-	case QAM_64:	c->operand[19] = 0x18; break;
-	case QAM_128:	c->operand[19] = 0x20; break;
-	case QAM_256:	c->operand[19] = 0x28; break;
-	case QAM_AUTO:
-	default:	c->operand[19] = 0x00;
-	}
-
-	c->operand[20] = 0x00;
-	c->operand[21] = 0x00;
-
-	return 22 + add_pid_filter(fdtv, &c->operand[22]);
-}
-
-static int avc_tuner_dsd_dvb_t(struct firedtv *fdtv,
-			       struct dtv_frontend_properties *p)
-{
-	struct avc_command_frame *c = (void *)fdtv->avc_data;
-
-	c->opcode = AVC_OPCODE_DSD;
-
-	c->operand[0] = 0;    /* source plug */
-	c->operand[1] = 0xd2; /* subfunction replace */
-	c->operand[2] = 0x20; /* system id = DVB */
-	c->operand[3] = 0x00; /* antenna number */
-	c->operand[4] = 0x0c; /* system_specific_multiplex selection_length */
-
-	/* multiplex_valid_flags, high byte */
-	c->operand[5] =
-	      0 << 7 /* reserved */
-	    | 1 << 6 /* CenterFrequency */
-	    | (p->bandwidth_hz != 0        ? 1 << 5 : 0)
-	    | (p->modulation  != QAM_AUTO              ? 1 << 4 : 0)
-	    | (p->hierarchy != HIERARCHY_AUTO ? 1 << 3 : 0)
-	    | (p->code_rate_HP   != FEC_AUTO              ? 1 << 2 : 0)
-	    | (p->code_rate_LP   != FEC_AUTO              ? 1 << 1 : 0)
-	    | (p->guard_interval != GUARD_INTERVAL_AUTO   ? 1 << 0 : 0);
-
-	/* multiplex_valid_flags, low byte */
-	c->operand[6] =
-	      0 << 7 /* NetworkID */
-	    | (p->transmission_mode != TRANSMISSION_MODE_AUTO ? 1 << 6 : 0)
-	    | 0 << 5 /* OtherFrequencyFlag */
-	    | 0 << 0 /* reserved */ ;
-
-	c->operand[7]  = 0x0;
-	c->operand[8]  = (p->frequency / 10) >> 24;
-	c->operand[9]  = ((p->frequency / 10) >> 16) & 0xff;
-	c->operand[10] = ((p->frequency / 10) >>  8) & 0xff;
-	c->operand[11] = (p->frequency / 10) & 0xff;
-
-	switch (p->bandwidth_hz) {
-	case 7000000:	c->operand[12] = 0x20; break;
-	case 8000000:
-	case 6000000:	/* not defined by AVC spec */
-	case 0:
-	default:		c->operand[12] = 0x00;
-	}
-
-	switch (p->modulation) {
-	case QAM_16:	c->operand[13] = 1 << 6; break;
-	case QAM_64:	c->operand[13] = 2 << 6; break;
-	case QPSK:
-	default:	c->operand[13] = 0x00;
-	}
-
-	switch (p->hierarchy) {
-	case HIERARCHY_1:	c->operand[13] |= 1 << 3; break;
-	case HIERARCHY_2:	c->operand[13] |= 2 << 3; break;
-	case HIERARCHY_4:	c->operand[13] |= 3 << 3; break;
-	case HIERARCHY_AUTO:
-	case HIERARCHY_NONE:
-	default:		break;
-	}
-
-	switch (p->code_rate_HP) {
-	case FEC_2_3:	c->operand[13] |= 1; break;
-	case FEC_3_4:	c->operand[13] |= 2; break;
-	case FEC_5_6:	c->operand[13] |= 3; break;
-	case FEC_7_8:	c->operand[13] |= 4; break;
-	case FEC_1_2:
-	default:	break;
-	}
-
-	switch (p->code_rate_LP) {
-	case FEC_2_3:	c->operand[14] = 1 << 5; break;
-	case FEC_3_4:	c->operand[14] = 2 << 5; break;
-	case FEC_5_6:	c->operand[14] = 3 << 5; break;
-	case FEC_7_8:	c->operand[14] = 4 << 5; break;
-	case FEC_1_2:
-	default:	c->operand[14] = 0x00; break;
-	}
-
-	switch (p->guard_interval) {
-	case GUARD_INTERVAL_1_16:	c->operand[14] |= 1 << 3; break;
-	case GUARD_INTERVAL_1_8:	c->operand[14] |= 2 << 3; break;
-	case GUARD_INTERVAL_1_4:	c->operand[14] |= 3 << 3; break;
-	case GUARD_INTERVAL_1_32:
-	case GUARD_INTERVAL_AUTO:
-	default:			break;
-	}
-
-	switch (p->transmission_mode) {
-	case TRANSMISSION_MODE_8K:	c->operand[14] |= 1 << 1; break;
-	case TRANSMISSION_MODE_2K:
-	case TRANSMISSION_MODE_AUTO:
-	default:			break;
-	}
-
-	c->operand[15] = 0x00; /* network_ID[0] */
-	c->operand[16] = 0x00; /* network_ID[1] */
-
-	return 17 + add_pid_filter(fdtv, &c->operand[17]);
-}
-
-int avc_tuner_dsd(struct firedtv *fdtv,
-		  struct dtv_frontend_properties *p)
-{
-	struct avc_command_frame *c = (void *)fdtv->avc_data;
-	int pos, ret;
-
-	mutex_lock(&fdtv->avc_mutex);
-
-	c->ctype   = AVC_CTYPE_CONTROL;
-	c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
-
-	switch (fdtv->type) {
-	case FIREDTV_DVB_S:
-	case FIREDTV_DVB_S2: pos = avc_tuner_tuneqpsk(fdtv, p); break;
-	case FIREDTV_DVB_C: pos = avc_tuner_dsd_dvb_c(fdtv, p); break;
-	case FIREDTV_DVB_T: pos = avc_tuner_dsd_dvb_t(fdtv, p); break;
-	default:
-		BUG();
-	}
-	pad_operands(c, pos);
-
-	fdtv->avc_data_length = ALIGN(3 + pos, 4);
-	ret = avc_write(fdtv);
-#if 0
-	/*
-	 * FIXME:
-	 * u8 *status was an out-parameter of avc_tuner_dsd, unused by caller.
-	 * Check for AVC_RESPONSE_ACCEPTED here instead?
-	 */
-	if (status)
-		*status = r->operand[2];
-#endif
-	mutex_unlock(&fdtv->avc_mutex);
-
-	if (ret == 0)
-		msleep(500);
-
-	return ret;
-}
-
-int avc_tuner_set_pids(struct firedtv *fdtv, unsigned char pidc, u16 pid[])
-{
-	struct avc_command_frame *c = (void *)fdtv->avc_data;
-	int ret, pos, k;
-
-	if (pidc > 16 && pidc != 0xff)
-		return -EINVAL;
-
-	mutex_lock(&fdtv->avc_mutex);
-
-	c->ctype   = AVC_CTYPE_CONTROL;
-	c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
-	c->opcode  = AVC_OPCODE_DSD;
-
-	c->operand[0] = 0;	/* source plug */
-	c->operand[1] = 0xd2;	/* subfunction replace */
-	c->operand[2] = 0x20;	/* system id = DVB */
-	c->operand[3] = 0x00;	/* antenna number */
-	c->operand[4] = 0x00;	/* system_specific_multiplex selection_length */
-	c->operand[5] = pidc;	/* Nr_of_dsd_sel_specs */
-
-	pos = 6;
-	if (pidc != 0xff)
-		for (k = 0; k < pidc; k++) {
-			c->operand[pos++] = 0x13; /* flowfunction relay */
-			c->operand[pos++] = 0x80; /* dsd_sel_spec_valid_flags -> PID */
-			c->operand[pos++] = (pid[k] >> 8) & 0x1f;
-			c->operand[pos++] = pid[k] & 0xff;
-			c->operand[pos++] = 0x00; /* tableID */
-			c->operand[pos++] = 0x00; /* filter_length */
-		}
-	pad_operands(c, pos);
-
-	fdtv->avc_data_length = ALIGN(3 + pos, 4);
-	ret = avc_write(fdtv);
-
-	/* FIXME: check response code? */
-
-	mutex_unlock(&fdtv->avc_mutex);
-
-	if (ret == 0)
-		msleep(50);
-
-	return ret;
-}
-
-int avc_tuner_get_ts(struct firedtv *fdtv)
-{
-	struct avc_command_frame *c = (void *)fdtv->avc_data;
-	int ret, sl;
-
-	mutex_lock(&fdtv->avc_mutex);
-
-	c->ctype   = AVC_CTYPE_CONTROL;
-	c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
-	c->opcode  = AVC_OPCODE_DSIT;
-
-	sl = fdtv->type == FIREDTV_DVB_T ? 0x0c : 0x11;
-
-	c->operand[0] = 0;	/* source plug */
-	c->operand[1] = 0xd2;	/* subfunction replace */
-	c->operand[2] = 0xff;	/* status */
-	c->operand[3] = 0x20;	/* system id = DVB */
-	c->operand[4] = 0x00;	/* antenna number */
-	c->operand[5] = 0x0; 	/* system_specific_search_flags */
-	c->operand[6] = sl;	/* system_specific_multiplex selection_length */
-	/*
-	 * operand[7]: valid_flags[0]
-	 * operand[8]: valid_flags[1]
-	 * operand[7 + sl]: nr_of_dsit_sel_specs (always 0)
-	 */
-	clear_operands(c, 7, 24);
-
-	fdtv->avc_data_length = fdtv->type == FIREDTV_DVB_T ? 24 : 28;
-	ret = avc_write(fdtv);
-
-	/* FIXME: check response code? */
-
-	mutex_unlock(&fdtv->avc_mutex);
-
-	if (ret == 0)
-		msleep(250);
-
-	return ret;
-}
-
-int avc_identify_subunit(struct firedtv *fdtv)
-{
-	struct avc_command_frame *c = (void *)fdtv->avc_data;
-	struct avc_response_frame *r = (void *)fdtv->avc_data;
-	int ret;
-
-	mutex_lock(&fdtv->avc_mutex);
-
-	c->ctype   = AVC_CTYPE_CONTROL;
-	c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
-	c->opcode  = AVC_OPCODE_READ_DESCRIPTOR;
-
-	c->operand[0] = DESCRIPTOR_SUBUNIT_IDENTIFIER;
-	c->operand[1] = 0xff;
-	c->operand[2] = 0x00;
-	c->operand[3] = 0x00; /* length highbyte */
-	c->operand[4] = 0x08; /* length lowbyte  */
-	c->operand[5] = 0x00; /* offset highbyte */
-	c->operand[6] = 0x0d; /* offset lowbyte  */
-	clear_operands(c, 7, 8); /* padding */
-
-	fdtv->avc_data_length = 12;
-	ret = avc_write(fdtv);
-	if (ret < 0)
-		goto out;
-
-	if ((r->response != AVC_RESPONSE_STABLE &&
-	     r->response != AVC_RESPONSE_ACCEPTED) ||
-	    (r->operand[3] << 8) + r->operand[4] != 8) {
-		dev_err(fdtv->device, "cannot read subunit identifier\n");
-		ret = -EINVAL;
-	}
-out:
-	mutex_unlock(&fdtv->avc_mutex);
-
-	return ret;
-}
-
-#define SIZEOF_ANTENNA_INPUT_INFO 22
-
-int avc_tuner_status(struct firedtv *fdtv, struct firedtv_tuner_status *stat)
-{
-	struct avc_command_frame *c = (void *)fdtv->avc_data;
-	struct avc_response_frame *r = (void *)fdtv->avc_data;
-	int length, ret;
-
-	mutex_lock(&fdtv->avc_mutex);
-
-	c->ctype   = AVC_CTYPE_CONTROL;
-	c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
-	c->opcode  = AVC_OPCODE_READ_DESCRIPTOR;
-
-	c->operand[0] = DESCRIPTOR_TUNER_STATUS;
-	c->operand[1] = 0xff;	/* read_result_status */
-	/*
-	 * operand[2]: reserved
-	 * operand[3]: SIZEOF_ANTENNA_INPUT_INFO >> 8
-	 * operand[4]: SIZEOF_ANTENNA_INPUT_INFO & 0xff
-	 */
-	clear_operands(c, 2, 31);
-
-	fdtv->avc_data_length = 12;
-	ret = avc_write(fdtv);
-	if (ret < 0)
-		goto out;
-
-	if (r->response != AVC_RESPONSE_STABLE &&
-	    r->response != AVC_RESPONSE_ACCEPTED) {
-		dev_err(fdtv->device, "cannot read tuner status\n");
-		ret = -EINVAL;
-		goto out;
-	}
-
-	length = r->operand[9];
-	if (r->operand[1] != 0x10 || length != SIZEOF_ANTENNA_INPUT_INFO) {
-		dev_err(fdtv->device, "got invalid tuner status\n");
-		ret = -EINVAL;
-		goto out;
-	}
-
-	stat->active_system		= r->operand[10];
-	stat->searching			= r->operand[11] >> 7 & 1;
-	stat->moving			= r->operand[11] >> 6 & 1;
-	stat->no_rf			= r->operand[11] >> 5 & 1;
-	stat->input			= r->operand[12] >> 7 & 1;
-	stat->selected_antenna		= r->operand[12] & 0x7f;
-	stat->ber			= r->operand[13] << 24 |
-					  r->operand[14] << 16 |
-					  r->operand[15] << 8 |
-					  r->operand[16];
-	stat->signal_strength		= r->operand[17];
-	stat->raster_frequency		= r->operand[18] >> 6 & 2;
-	stat->rf_frequency		= (r->operand[18] & 0x3f) << 16 |
-					  r->operand[19] << 8 |
-					  r->operand[20];
-	stat->man_dep_info_length	= r->operand[21];
-	stat->front_end_error		= r->operand[22] >> 4 & 1;
-	stat->antenna_error		= r->operand[22] >> 3 & 1;
-	stat->front_end_power_status	= r->operand[22] >> 1 & 1;
-	stat->power_supply		= r->operand[22] & 1;
-	stat->carrier_noise_ratio	= r->operand[23] << 8 |
-					  r->operand[24];
-	stat->power_supply_voltage	= r->operand[27];
-	stat->antenna_voltage		= r->operand[28];
-	stat->firewire_bus_voltage	= r->operand[29];
-	stat->ca_mmi			= r->operand[30] & 1;
-	stat->ca_pmt_reply		= r->operand[31] >> 7 & 1;
-	stat->ca_date_time_request	= r->operand[31] >> 6 & 1;
-	stat->ca_application_info	= r->operand[31] >> 5 & 1;
-	stat->ca_module_present_status	= r->operand[31] >> 4 & 1;
-	stat->ca_dvb_flag		= r->operand[31] >> 3 & 1;
-	stat->ca_error_flag		= r->operand[31] >> 2 & 1;
-	stat->ca_initialization_status	= r->operand[31] >> 1 & 1;
-out:
-	mutex_unlock(&fdtv->avc_mutex);
-
-	return ret;
-}
-
-int avc_lnb_control(struct firedtv *fdtv, char voltage, char burst,
-		    char conttone, char nrdiseq,
-		    struct dvb_diseqc_master_cmd *diseqcmd)
-{
-	struct avc_command_frame *c = (void *)fdtv->avc_data;
-	struct avc_response_frame *r = (void *)fdtv->avc_data;
-	int pos, j, k, ret;
-
-	mutex_lock(&fdtv->avc_mutex);
-
-	c->ctype   = AVC_CTYPE_CONTROL;
-	c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
-	c->opcode  = AVC_OPCODE_VENDOR;
-
-	c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
-	c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
-	c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
-	c->operand[3] = SFE_VENDOR_OPCODE_LNB_CONTROL;
-	c->operand[4] = voltage;
-	c->operand[5] = nrdiseq;
-
-	pos = 6;
-	for (j = 0; j < nrdiseq; j++) {
-		c->operand[pos++] = diseqcmd[j].msg_len;
-
-		for (k = 0; k < diseqcmd[j].msg_len; k++)
-			c->operand[pos++] = diseqcmd[j].msg[k];
-	}
-	c->operand[pos++] = burst;
-	c->operand[pos++] = conttone;
-	pad_operands(c, pos);
-
-	fdtv->avc_data_length = ALIGN(3 + pos, 4);
-	ret = avc_write(fdtv);
-	if (ret < 0)
-		goto out;
-
-	if (r->response != AVC_RESPONSE_ACCEPTED) {
-		dev_err(fdtv->device, "LNB control failed\n");
-		ret = -EINVAL;
-	}
-out:
-	mutex_unlock(&fdtv->avc_mutex);
-
-	return ret;
-}
-
-int avc_register_remote_control(struct firedtv *fdtv)
-{
-	struct avc_command_frame *c = (void *)fdtv->avc_data;
-	int ret;
-
-	mutex_lock(&fdtv->avc_mutex);
-
-	c->ctype   = AVC_CTYPE_NOTIFY;
-	c->subunit = AVC_SUBUNIT_TYPE_UNIT | 7;
-	c->opcode  = AVC_OPCODE_VENDOR;
-
-	c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
-	c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
-	c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
-	c->operand[3] = SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL;
-	c->operand[4] = 0; /* padding */
-
-	fdtv->avc_data_length = 8;
-	ret = avc_write(fdtv);
-
-	/* FIXME: check response code? */
-
-	mutex_unlock(&fdtv->avc_mutex);
-
-	return ret;
-}
-
-void avc_remote_ctrl_work(struct work_struct *work)
-{
-	struct firedtv *fdtv =
-			container_of(work, struct firedtv, remote_ctrl_work);
-
-	/* Should it be rescheduled in failure cases? */
-	avc_register_remote_control(fdtv);
-}
-
-#if 0 /* FIXME: unused */
-int avc_tuner_host2ca(struct firedtv *fdtv)
-{
-	struct avc_command_frame *c = (void *)fdtv->avc_data;
-	int ret;
-
-	mutex_lock(&fdtv->avc_mutex);
-
-	c->ctype   = AVC_CTYPE_CONTROL;
-	c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
-	c->opcode  = AVC_OPCODE_VENDOR;
-
-	c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
-	c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
-	c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
-	c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
-	c->operand[4] = 0; /* slot */
-	c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */
-	clear_operands(c, 6, 8);
-
-	fdtv->avc_data_length = 12;
-	ret = avc_write(fdtv);
-
-	/* FIXME: check response code? */
-
-	mutex_unlock(&fdtv->avc_mutex);
-
-	return ret;
-}
-#endif
-
-static int get_ca_object_pos(struct avc_response_frame *r)
-{
-	int length = 1;
-
-	/* Check length of length field */
-	if (r->operand[7] & 0x80)
-		length = (r->operand[7] & 0x7f) + 1;
-	return length + 7;
-}
-
-static int get_ca_object_length(struct avc_response_frame *r)
-{
-#if 0 /* FIXME: unused */
-	int size = 0;
-	int i;
-
-	if (r->operand[7] & 0x80)
-		for (i = 0; i < (r->operand[7] & 0x7f); i++) {
-			size <<= 8;
-			size += r->operand[8 + i];
-		}
-#endif
-	return r->operand[7];
-}
-
-int avc_ca_app_info(struct firedtv *fdtv, char *app_info, unsigned int *len)
-{
-	struct avc_command_frame *c = (void *)fdtv->avc_data;
-	struct avc_response_frame *r = (void *)fdtv->avc_data;
-	int pos, ret;
-
-	mutex_lock(&fdtv->avc_mutex);
-
-	c->ctype   = AVC_CTYPE_STATUS;
-	c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
-	c->opcode  = AVC_OPCODE_VENDOR;
-
-	c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
-	c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
-	c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
-	c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
-	c->operand[4] = 0; /* slot */
-	c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */
-	clear_operands(c, 6, LAST_OPERAND);
-
-	fdtv->avc_data_length = 12;
-	ret = avc_write(fdtv);
-	if (ret < 0)
-		goto out;
-
-	/* FIXME: check response code and validate response data */
-
-	pos = get_ca_object_pos(r);
-	app_info[0] = (EN50221_TAG_APP_INFO >> 16) & 0xff;
-	app_info[1] = (EN50221_TAG_APP_INFO >>  8) & 0xff;
-	app_info[2] = (EN50221_TAG_APP_INFO >>  0) & 0xff;
-	app_info[3] = 6 + r->operand[pos + 4];
-	app_info[4] = 0x01;
-	memcpy(&app_info[5], &r->operand[pos], 5 + r->operand[pos + 4]);
-	*len = app_info[3] + 4;
-out:
-	mutex_unlock(&fdtv->avc_mutex);
-
-	return ret;
-}
-
-int avc_ca_info(struct firedtv *fdtv, char *app_info, unsigned int *len)
-{
-	struct avc_command_frame *c = (void *)fdtv->avc_data;
-	struct avc_response_frame *r = (void *)fdtv->avc_data;
-	int i, pos, ret;
-
-	mutex_lock(&fdtv->avc_mutex);
-
-	c->ctype   = AVC_CTYPE_STATUS;
-	c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
-	c->opcode  = AVC_OPCODE_VENDOR;
-
-	c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
-	c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
-	c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
-	c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
-	c->operand[4] = 0; /* slot */
-	c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */
-	clear_operands(c, 6, LAST_OPERAND);
-
-	fdtv->avc_data_length = 12;
-	ret = avc_write(fdtv);
-	if (ret < 0)
-		goto out;
-
-	/* FIXME: check response code and validate response data */
-
-	pos = get_ca_object_pos(r);
-	app_info[0] = (EN50221_TAG_CA_INFO >> 16) & 0xff;
-	app_info[1] = (EN50221_TAG_CA_INFO >>  8) & 0xff;
-	app_info[2] = (EN50221_TAG_CA_INFO >>  0) & 0xff;
-	if (num_fake_ca_system_ids == 0) {
-		app_info[3] = 2;
-		app_info[4] = r->operand[pos + 0];
-		app_info[5] = r->operand[pos + 1];
-	} else {
-		app_info[3] = num_fake_ca_system_ids * 2;
-		for (i = 0; i < num_fake_ca_system_ids; i++) {
-			app_info[4 + i * 2] =
-				(fake_ca_system_ids[i] >> 8) & 0xff;
-			app_info[5 + i * 2] = fake_ca_system_ids[i] & 0xff;
-		}
-	}
-	*len = app_info[3] + 4;
-out:
-	mutex_unlock(&fdtv->avc_mutex);
-
-	return ret;
-}
-
-int avc_ca_reset(struct firedtv *fdtv)
-{
-	struct avc_command_frame *c = (void *)fdtv->avc_data;
-	int ret;
-
-	mutex_lock(&fdtv->avc_mutex);
-
-	c->ctype   = AVC_CTYPE_CONTROL;
-	c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
-	c->opcode  = AVC_OPCODE_VENDOR;
-
-	c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
-	c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
-	c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
-	c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
-	c->operand[4] = 0; /* slot */
-	c->operand[5] = SFE_VENDOR_TAG_CA_RESET; /* ca tag */
-	c->operand[6] = 0; /* more/last */
-	c->operand[7] = 1; /* length */
-	c->operand[8] = 0; /* force hardware reset */
-
-	fdtv->avc_data_length = 12;
-	ret = avc_write(fdtv);
-
-	/* FIXME: check response code? */
-
-	mutex_unlock(&fdtv->avc_mutex);
-
-	return ret;
-}
-
-int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length)
-{
-	struct avc_command_frame *c = (void *)fdtv->avc_data;
-	struct avc_response_frame *r = (void *)fdtv->avc_data;
-	int list_management;
-	int program_info_length;
-	int pmt_cmd_id;
-	int read_pos;
-	int write_pos;
-	int es_info_length;
-	int crc32_csum;
-	int ret;
-
-	if (unlikely(avc_debug & AVC_DEBUG_APPLICATION_PMT))
-		debug_pmt(msg, length);
-
-	mutex_lock(&fdtv->avc_mutex);
-
-	c->ctype   = AVC_CTYPE_CONTROL;
-	c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
-	c->opcode  = AVC_OPCODE_VENDOR;
-
-	if (msg[0] != EN50221_LIST_MANAGEMENT_ONLY) {
-		dev_info(fdtv->device, "forcing list_management to ONLY\n");
-		msg[0] = EN50221_LIST_MANAGEMENT_ONLY;
-	}
-	/* We take the cmd_id from the programme level only! */
-	list_management = msg[0];
-	program_info_length = ((msg[4] & 0x0f) << 8) + msg[5];
-	if (program_info_length > 0)
-		program_info_length--; /* Remove pmt_cmd_id */
-	pmt_cmd_id = msg[6];
-
-	c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
-	c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
-	c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
-	c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
-	c->operand[4] = 0; /* slot */
-	c->operand[5] = SFE_VENDOR_TAG_CA_PMT; /* ca tag */
-	c->operand[6] = 0; /* more/last */
-	/* Use three bytes for length field in case length > 127 */
-	c->operand[10] = list_management;
-	c->operand[11] = 0x01; /* pmt_cmd=OK_descramble */
-
-	/* TS program map table */
-
-	c->operand[12] = 0x02; /* Table id=2 */
-	c->operand[13] = 0x80; /* Section syntax + length */
-
-	c->operand[15] = msg[1]; /* Program number */
-	c->operand[16] = msg[2];
-	c->operand[17] = msg[3]; /* Version number and current/next */
-	c->operand[18] = 0x00; /* Section number=0 */
-	c->operand[19] = 0x00; /* Last section number=0 */
-	c->operand[20] = 0x1f; /* PCR_PID=1FFF */
-	c->operand[21] = 0xff;
-	c->operand[22] = (program_info_length >> 8); /* Program info length */
-	c->operand[23] = (program_info_length & 0xff);
-
-	/* CA descriptors at programme level */
-	read_pos = 6;
-	write_pos = 24;
-	if (program_info_length > 0) {
-		pmt_cmd_id = msg[read_pos++];
-		if (pmt_cmd_id != 1 && pmt_cmd_id != 4)
-			dev_err(fdtv->device,
-				"invalid pmt_cmd_id %d\n", pmt_cmd_id);
-
-		memcpy(&c->operand[write_pos], &msg[read_pos],
-		       program_info_length);
-		read_pos += program_info_length;
-		write_pos += program_info_length;
-	}
-	while (read_pos < length) {
-		c->operand[write_pos++] = msg[read_pos++];
-		c->operand[write_pos++] = msg[read_pos++];
-		c->operand[write_pos++] = msg[read_pos++];
-		es_info_length =
-			((msg[read_pos] & 0x0f) << 8) + msg[read_pos + 1];
-		read_pos += 2;
-		if (es_info_length > 0)
-			es_info_length--; /* Remove pmt_cmd_id */
-		c->operand[write_pos++] = es_info_length >> 8;
-		c->operand[write_pos++] = es_info_length & 0xff;
-		if (es_info_length > 0) {
-			pmt_cmd_id = msg[read_pos++];
-			if (pmt_cmd_id != 1 && pmt_cmd_id != 4)
-				dev_err(fdtv->device, "invalid pmt_cmd_id %d "
-					"at stream level\n", pmt_cmd_id);
-
-			memcpy(&c->operand[write_pos], &msg[read_pos],
-			       es_info_length);
-			read_pos += es_info_length;
-			write_pos += es_info_length;
-		}
-	}
-	write_pos += 4; /* CRC */
-
-	c->operand[7] = 0x82;
-	c->operand[8] = (write_pos - 10) >> 8;
-	c->operand[9] = (write_pos - 10) & 0xff;
-	c->operand[14] = write_pos - 15;
-
-	crc32_csum = crc32_be(0, &c->operand[10], c->operand[12] - 1);
-	c->operand[write_pos - 4] = (crc32_csum >> 24) & 0xff;
-	c->operand[write_pos - 3] = (crc32_csum >> 16) & 0xff;
-	c->operand[write_pos - 2] = (crc32_csum >>  8) & 0xff;
-	c->operand[write_pos - 1] = (crc32_csum >>  0) & 0xff;
-	pad_operands(c, write_pos);
-
-	fdtv->avc_data_length = ALIGN(3 + write_pos, 4);
-	ret = avc_write(fdtv);
-	if (ret < 0)
-		goto out;
-
-	if (r->response != AVC_RESPONSE_ACCEPTED) {
-		dev_err(fdtv->device,
-			"CA PMT failed with response 0x%x\n", r->response);
-		ret = -EACCES;
-	}
-out:
-	mutex_unlock(&fdtv->avc_mutex);
-
-	return ret;
-}
-
-int avc_ca_get_time_date(struct firedtv *fdtv, int *interval)
-{
-	struct avc_command_frame *c = (void *)fdtv->avc_data;
-	struct avc_response_frame *r = (void *)fdtv->avc_data;
-	int ret;
-
-	mutex_lock(&fdtv->avc_mutex);
-
-	c->ctype   = AVC_CTYPE_STATUS;
-	c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
-	c->opcode  = AVC_OPCODE_VENDOR;
-
-	c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
-	c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
-	c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
-	c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
-	c->operand[4] = 0; /* slot */
-	c->operand[5] = SFE_VENDOR_TAG_CA_DATE_TIME; /* ca tag */
-	clear_operands(c, 6, LAST_OPERAND);
-
-	fdtv->avc_data_length = 12;
-	ret = avc_write(fdtv);
-	if (ret < 0)
-		goto out;
-
-	/* FIXME: check response code and validate response data */
-
-	*interval = r->operand[get_ca_object_pos(r)];
-out:
-	mutex_unlock(&fdtv->avc_mutex);
-
-	return ret;
-}
-
-int avc_ca_enter_menu(struct firedtv *fdtv)
-{
-	struct avc_command_frame *c = (void *)fdtv->avc_data;
-	int ret;
-
-	mutex_lock(&fdtv->avc_mutex);
-
-	c->ctype   = AVC_CTYPE_STATUS;
-	c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
-	c->opcode  = AVC_OPCODE_VENDOR;
-
-	c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
-	c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
-	c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
-	c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
-	c->operand[4] = 0; /* slot */
-	c->operand[5] = SFE_VENDOR_TAG_CA_ENTER_MENU;
-	clear_operands(c, 6, 8);
-
-	fdtv->avc_data_length = 12;
-	ret = avc_write(fdtv);
-
-	/* FIXME: check response code? */
-
-	mutex_unlock(&fdtv->avc_mutex);
-
-	return ret;
-}
-
-int avc_ca_get_mmi(struct firedtv *fdtv, char *mmi_object, unsigned int *len)
-{
-	struct avc_command_frame *c = (void *)fdtv->avc_data;
-	struct avc_response_frame *r = (void *)fdtv->avc_data;
-	int ret;
-
-	mutex_lock(&fdtv->avc_mutex);
-
-	c->ctype   = AVC_CTYPE_STATUS;
-	c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
-	c->opcode  = AVC_OPCODE_VENDOR;
-
-	c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
-	c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
-	c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
-	c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
-	c->operand[4] = 0; /* slot */
-	c->operand[5] = SFE_VENDOR_TAG_CA_MMI;
-	clear_operands(c, 6, LAST_OPERAND);
-
-	fdtv->avc_data_length = 12;
-	ret = avc_write(fdtv);
-	if (ret < 0)
-		goto out;
-
-	/* FIXME: check response code and validate response data */
-
-	*len = get_ca_object_length(r);
-	memcpy(mmi_object, &r->operand[get_ca_object_pos(r)], *len);
-out:
-	mutex_unlock(&fdtv->avc_mutex);
-
-	return ret;
-}
-
-#define CMP_OUTPUT_PLUG_CONTROL_REG_0	0xfffff0000904ULL
-
-static int cmp_read(struct firedtv *fdtv, u64 addr, __be32 *data)
-{
-	int ret;
-
-	ret = fdtv_read(fdtv, addr, data);
-	if (ret < 0)
-		dev_err(fdtv->device, "CMP: read I/O error\n");
-
-	return ret;
-}
-
-static int cmp_lock(struct firedtv *fdtv, u64 addr, __be32 data[])
-{
-	int ret;
-
-	ret = fdtv_lock(fdtv, addr, data);
-	if (ret < 0)
-		dev_err(fdtv->device, "CMP: lock I/O error\n");
-
-	return ret;
-}
-
-static inline u32 get_opcr(__be32 opcr, u32 mask, u32 shift)
-{
-	return (be32_to_cpu(opcr) >> shift) & mask;
-}
-
-static inline void set_opcr(__be32 *opcr, u32 value, u32 mask, u32 shift)
-{
-	*opcr &= ~cpu_to_be32(mask << shift);
-	*opcr |= cpu_to_be32((value & mask) << shift);
-}
-
-#define get_opcr_online(v)		get_opcr((v), 0x1, 31)
-#define get_opcr_p2p_connections(v)	get_opcr((v), 0x3f, 24)
-#define get_opcr_channel(v)		get_opcr((v), 0x3f, 16)
-
-#define set_opcr_p2p_connections(p, v)	set_opcr((p), (v), 0x3f, 24)
-#define set_opcr_channel(p, v)		set_opcr((p), (v), 0x3f, 16)
-#define set_opcr_data_rate(p, v)	set_opcr((p), (v), 0x3, 14)
-#define set_opcr_overhead_id(p, v)	set_opcr((p), (v), 0xf, 10)
-
-int cmp_establish_pp_connection(struct firedtv *fdtv, int plug, int channel)
-{
-	__be32 old_opcr, opcr[2];
-	u64 opcr_address = CMP_OUTPUT_PLUG_CONTROL_REG_0 + (plug << 2);
-	int attempts = 0;
-	int ret;
-
-	ret = cmp_read(fdtv, opcr_address, opcr);
-	if (ret < 0)
-		return ret;
-
-repeat:
-	if (!get_opcr_online(*opcr)) {
-		dev_err(fdtv->device, "CMP: output offline\n");
-		return -EBUSY;
-	}
-
-	old_opcr = *opcr;
-
-	if (get_opcr_p2p_connections(*opcr)) {
-		if (get_opcr_channel(*opcr) != channel) {
-			dev_err(fdtv->device, "CMP: cannot change channel\n");
-			return -EBUSY;
-		}
-		dev_info(fdtv->device, "CMP: overlaying connection\n");
-
-		/* We don't allocate isochronous resources. */
-	} else {
-		set_opcr_channel(opcr, channel);
-		set_opcr_data_rate(opcr, 2); /* S400 */
-
-		/* FIXME: this is for the worst case - optimize */
-		set_opcr_overhead_id(opcr, 0);
-
-		/* FIXME: allocate isochronous channel and bandwidth at IRM */
-	}
-
-	set_opcr_p2p_connections(opcr, get_opcr_p2p_connections(*opcr) + 1);
-
-	opcr[1] = *opcr;
-	opcr[0] = old_opcr;
-
-	ret = cmp_lock(fdtv, opcr_address, opcr);
-	if (ret < 0)
-		return ret;
-
-	if (old_opcr != *opcr) {
-		/*
-		 * FIXME: if old_opcr.P2P_Connections > 0,
-		 * deallocate isochronous channel and bandwidth at IRM
-		 */
-
-		if (++attempts < 6) /* arbitrary limit */
-			goto repeat;
-		return -EBUSY;
-	}
-
-	return 0;
-}
-
-void cmp_break_pp_connection(struct firedtv *fdtv, int plug, int channel)
-{
-	__be32 old_opcr, opcr[2];
-	u64 opcr_address = CMP_OUTPUT_PLUG_CONTROL_REG_0 + (plug << 2);
-	int attempts = 0;
-
-	if (cmp_read(fdtv, opcr_address, opcr) < 0)
-		return;
-
-repeat:
-	if (!get_opcr_online(*opcr) || !get_opcr_p2p_connections(*opcr) ||
-	    get_opcr_channel(*opcr) != channel) {
-		dev_err(fdtv->device, "CMP: no connection to break\n");
-		return;
-	}
-
-	old_opcr = *opcr;
-	set_opcr_p2p_connections(opcr, get_opcr_p2p_connections(*opcr) - 1);
-
-	opcr[1] = *opcr;
-	opcr[0] = old_opcr;
-
-	if (cmp_lock(fdtv, opcr_address, opcr) < 0)
-		return;
-
-	if (old_opcr != *opcr) {
-		/*
-		 * FIXME: if old_opcr.P2P_Connections == 1, i.e. we were last
-		 * owner, deallocate isochronous channel and bandwidth at IRM
-		 * if (...)
-		 *	fdtv->backend->dealloc_resources(fdtv, channel, bw);
-		 */
-
-		if (++attempts < 6) /* arbitrary limit */
-			goto repeat;
-	}
-}
diff --git a/drivers/media/dvb/firewire/firedtv-ci.c b/drivers/media/dvb/firewire/firedtv-ci.c
deleted file mode 100644
index e5ebdbf..0000000
--- a/drivers/media/dvb/firewire/firedtv-ci.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * FireDTV driver (formerly known as FireSAT)
- *
- * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
- * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation; either version 2 of
- *	the License, or (at your option) any later version.
- */
-
-#include <linux/device.h>
-#include <linux/dvb/ca.h>
-#include <linux/fs.h>
-#include <linux/module.h>
-
-#include <dvbdev.h>
-
-#include "firedtv.h"
-
-#define EN50221_TAG_APP_INFO_ENQUIRY	0x9f8020
-#define EN50221_TAG_CA_INFO_ENQUIRY	0x9f8030
-#define EN50221_TAG_CA_PMT		0x9f8032
-#define EN50221_TAG_ENTER_MENU		0x9f8022
-
-static int fdtv_ca_ready(struct firedtv_tuner_status *stat)
-{
-	return stat->ca_initialization_status	== 1 &&
-	       stat->ca_error_flag		== 0 &&
-	       stat->ca_dvb_flag		== 1 &&
-	       stat->ca_module_present_status	== 1;
-}
-
-static int fdtv_get_ca_flags(struct firedtv_tuner_status *stat)
-{
-	int flags = 0;
-
-	if (stat->ca_module_present_status == 1)
-		flags |= CA_CI_MODULE_PRESENT;
-	if (stat->ca_initialization_status == 1 &&
-	    stat->ca_error_flag            == 0 &&
-	    stat->ca_dvb_flag              == 1)
-		flags |= CA_CI_MODULE_READY;
-	return flags;
-}
-
-static int fdtv_ca_get_caps(void *arg)
-{
-	struct ca_caps *cap = arg;
-
-	cap->slot_num = 1;
-	cap->slot_type = CA_CI;
-	cap->descr_num = 1;
-	cap->descr_type = CA_ECD;
-	return 0;
-}
-
-static int fdtv_ca_get_slot_info(struct firedtv *fdtv, void *arg)
-{
-	struct firedtv_tuner_status stat;
-	struct ca_slot_info *slot = arg;
-	int err;
-
-	err = avc_tuner_status(fdtv, &stat);
-	if (err)
-		return err;
-
-	if (slot->num != 0)
-		return -EACCES;
-
-	slot->type = CA_CI;
-	slot->flags = fdtv_get_ca_flags(&stat);
-	return 0;
-}
-
-static int fdtv_ca_app_info(struct firedtv *fdtv, void *arg)
-{
-	struct ca_msg *reply = arg;
-
-	return avc_ca_app_info(fdtv, reply->msg, &reply->length);
-}
-
-static int fdtv_ca_info(struct firedtv *fdtv, void *arg)
-{
-	struct ca_msg *reply = arg;
-
-	return avc_ca_info(fdtv, reply->msg, &reply->length);
-}
-
-static int fdtv_ca_get_mmi(struct firedtv *fdtv, void *arg)
-{
-	struct ca_msg *reply = arg;
-
-	return avc_ca_get_mmi(fdtv, reply->msg, &reply->length);
-}
-
-static int fdtv_ca_get_msg(struct firedtv *fdtv, void *arg)
-{
-	struct firedtv_tuner_status stat;
-	int err;
-
-	switch (fdtv->ca_last_command) {
-	case EN50221_TAG_APP_INFO_ENQUIRY:
-		err = fdtv_ca_app_info(fdtv, arg);
-		break;
-	case EN50221_TAG_CA_INFO_ENQUIRY:
-		err = fdtv_ca_info(fdtv, arg);
-		break;
-	default:
-		err = avc_tuner_status(fdtv, &stat);
-		if (err)
-			break;
-		if (stat.ca_mmi == 1)
-			err = fdtv_ca_get_mmi(fdtv, arg);
-		else {
-			dev_info(fdtv->device, "unhandled CA message 0x%08x\n",
-				 fdtv->ca_last_command);
-			err = -EACCES;
-		}
-	}
-	fdtv->ca_last_command = 0;
-	return err;
-}
-
-static int fdtv_ca_pmt(struct firedtv *fdtv, void *arg)
-{
-	struct ca_msg *msg = arg;
-	int data_pos;
-	int data_length;
-	int i;
-
-	data_pos = 4;
-	if (msg->msg[3] & 0x80) {
-		data_length = 0;
-		for (i = 0; i < (msg->msg[3] & 0x7f); i++)
-			data_length = (data_length << 8) + msg->msg[data_pos++];
-	} else {
-		data_length = msg->msg[3];
-	}
-
-	return avc_ca_pmt(fdtv, &msg->msg[data_pos], data_length);
-}
-
-static int fdtv_ca_send_msg(struct firedtv *fdtv, void *arg)
-{
-	struct ca_msg *msg = arg;
-	int err;
-
-	/* Do we need a semaphore for this? */
-	fdtv->ca_last_command =
-		(msg->msg[0] << 16) + (msg->msg[1] << 8) + msg->msg[2];
-	switch (fdtv->ca_last_command) {
-	case EN50221_TAG_CA_PMT:
-		err = fdtv_ca_pmt(fdtv, arg);
-		break;
-	case EN50221_TAG_APP_INFO_ENQUIRY:
-		/* handled in ca_get_msg */
-		err = 0;
-		break;
-	case EN50221_TAG_CA_INFO_ENQUIRY:
-		/* handled in ca_get_msg */
-		err = 0;
-		break;
-	case EN50221_TAG_ENTER_MENU:
-		err = avc_ca_enter_menu(fdtv);
-		break;
-	default:
-		dev_err(fdtv->device, "unhandled CA message 0x%08x\n",
-			fdtv->ca_last_command);
-		err = -EACCES;
-	}
-	return err;
-}
-
-static int fdtv_ca_ioctl(struct file *file, unsigned int cmd, void *arg)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct firedtv *fdtv = dvbdev->priv;
-	struct firedtv_tuner_status stat;
-	int err;
-
-	switch (cmd) {
-	case CA_RESET:
-		err = avc_ca_reset(fdtv);
-		break;
-	case CA_GET_CAP:
-		err = fdtv_ca_get_caps(arg);
-		break;
-	case CA_GET_SLOT_INFO:
-		err = fdtv_ca_get_slot_info(fdtv, arg);
-		break;
-	case CA_GET_MSG:
-		err = fdtv_ca_get_msg(fdtv, arg);
-		break;
-	case CA_SEND_MSG:
-		err = fdtv_ca_send_msg(fdtv, arg);
-		break;
-	default:
-		dev_info(fdtv->device, "unhandled CA ioctl %u\n", cmd);
-		err = -EOPNOTSUPP;
-	}
-
-	/* FIXME Is this necessary? */
-	avc_tuner_status(fdtv, &stat);
-
-	return err;
-}
-
-static unsigned int fdtv_ca_io_poll(struct file *file, poll_table *wait)
-{
-	return POLLIN;
-}
-
-static const struct file_operations fdtv_ca_fops = {
-	.owner		= THIS_MODULE,
-	.unlocked_ioctl	= dvb_generic_ioctl,
-	.open		= dvb_generic_open,
-	.release	= dvb_generic_release,
-	.poll		= fdtv_ca_io_poll,
-	.llseek		= noop_llseek,
-};
-
-static struct dvb_device fdtv_ca = {
-	.users		= 1,
-	.readers	= 1,
-	.writers	= 1,
-	.fops		= &fdtv_ca_fops,
-	.kernel_ioctl	= fdtv_ca_ioctl,
-};
-
-int fdtv_ca_register(struct firedtv *fdtv)
-{
-	struct firedtv_tuner_status stat;
-	int err;
-
-	if (avc_tuner_status(fdtv, &stat))
-		return -EINVAL;
-
-	if (!fdtv_ca_ready(&stat))
-		return -EFAULT;
-
-	err = dvb_register_device(&fdtv->adapter, &fdtv->cadev,
-				  &fdtv_ca, fdtv, DVB_DEVICE_CA);
-
-	if (stat.ca_application_info == 0)
-		dev_err(fdtv->device, "CaApplicationInfo is not set\n");
-	if (stat.ca_date_time_request == 1)
-		avc_ca_get_time_date(fdtv, &fdtv->ca_time_interval);
-
-	return err;
-}
-
-void fdtv_ca_release(struct firedtv *fdtv)
-{
-	if (fdtv->cadev)
-		dvb_unregister_device(fdtv->cadev);
-}
diff --git a/drivers/media/dvb/firewire/firedtv-dvb.c b/drivers/media/dvb/firewire/firedtv-dvb.c
deleted file mode 100644
index eb7496e..0000000
--- a/drivers/media/dvb/firewire/firedtv-dvb.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * FireDTV driver (formerly known as FireSAT)
- *
- * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
- * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation; either version 2 of
- *	the License, or (at your option) any later version.
- */
-
-#include <linux/bitops.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/types.h>
-
-#include <dmxdev.h>
-#include <dvb_demux.h>
-#include <dvbdev.h>
-#include <dvb_frontend.h>
-
-#include "firedtv.h"
-
-static int alloc_channel(struct firedtv *fdtv)
-{
-	int i;
-
-	for (i = 0; i < 16; i++)
-		if (!__test_and_set_bit(i, &fdtv->channel_active))
-			break;
-	return i;
-}
-
-static void collect_channels(struct firedtv *fdtv, int *pidc, u16 pid[])
-{
-	int i, n;
-
-	for (i = 0, n = 0; i < 16; i++)
-		if (test_bit(i, &fdtv->channel_active))
-			pid[n++] = fdtv->channel_pid[i];
-	*pidc = n;
-}
-
-static inline void dealloc_channel(struct firedtv *fdtv, int i)
-{
-	__clear_bit(i, &fdtv->channel_active);
-}
-
-int fdtv_start_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct firedtv *fdtv = dvbdmxfeed->demux->priv;
-	int pidc, c, ret;
-	u16 pids[16];
-
-	switch (dvbdmxfeed->type) {
-	case DMX_TYPE_TS:
-	case DMX_TYPE_SEC:
-		break;
-	default:
-		dev_err(fdtv->device, "can't start dmx feed: invalid type %u\n",
-			dvbdmxfeed->type);
-		return -EINVAL;
-	}
-
-	if (mutex_lock_interruptible(&fdtv->demux_mutex))
-		return -EINTR;
-
-	if (dvbdmxfeed->type == DMX_TYPE_TS) {
-		switch (dvbdmxfeed->pes_type) {
-		case DMX_TS_PES_VIDEO:
-		case DMX_TS_PES_AUDIO:
-		case DMX_TS_PES_TELETEXT:
-		case DMX_TS_PES_PCR:
-		case DMX_TS_PES_OTHER:
-			c = alloc_channel(fdtv);
-			break;
-		default:
-			dev_err(fdtv->device,
-				"can't start dmx feed: invalid pes type %u\n",
-				dvbdmxfeed->pes_type);
-			ret = -EINVAL;
-			goto out;
-		}
-	} else {
-		c = alloc_channel(fdtv);
-	}
-
-	if (c > 15) {
-		dev_err(fdtv->device, "can't start dmx feed: busy\n");
-		ret = -EBUSY;
-		goto out;
-	}
-
-	dvbdmxfeed->priv = (typeof(dvbdmxfeed->priv))(unsigned long)c;
-	fdtv->channel_pid[c] = dvbdmxfeed->pid;
-	collect_channels(fdtv, &pidc, pids);
-
-	if (dvbdmxfeed->pid == 8192) {
-		ret = avc_tuner_get_ts(fdtv);
-		if (ret) {
-			dealloc_channel(fdtv, c);
-			dev_err(fdtv->device, "can't get TS\n");
-			goto out;
-		}
-	} else {
-		ret = avc_tuner_set_pids(fdtv, pidc, pids);
-		if (ret) {
-			dealloc_channel(fdtv, c);
-			dev_err(fdtv->device, "can't set PIDs\n");
-			goto out;
-		}
-	}
-out:
-	mutex_unlock(&fdtv->demux_mutex);
-
-	return ret;
-}
-
-int fdtv_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct dvb_demux *demux = dvbdmxfeed->demux;
-	struct firedtv *fdtv = demux->priv;
-	int pidc, c, ret;
-	u16 pids[16];
-
-	if (dvbdmxfeed->type == DMX_TYPE_TS &&
-	    !((dvbdmxfeed->ts_type & TS_PACKET) &&
-	      (demux->dmx.frontend->source != DMX_MEMORY_FE))) {
-
-		if (dvbdmxfeed->ts_type & TS_DECODER) {
-			if (dvbdmxfeed->pes_type >= DMX_TS_PES_OTHER ||
-			    !demux->pesfilter[dvbdmxfeed->pes_type])
-				return -EINVAL;
-
-			demux->pids[dvbdmxfeed->pes_type] |= 0x8000;
-			demux->pesfilter[dvbdmxfeed->pes_type] = NULL;
-		}
-
-		if (!(dvbdmxfeed->ts_type & TS_DECODER &&
-		      dvbdmxfeed->pes_type < DMX_TS_PES_OTHER))
-			return 0;
-	}
-
-	if (mutex_lock_interruptible(&fdtv->demux_mutex))
-		return -EINTR;
-
-	c = (unsigned long)dvbdmxfeed->priv;
-	dealloc_channel(fdtv, c);
-	collect_channels(fdtv, &pidc, pids);
-
-	ret = avc_tuner_set_pids(fdtv, pidc, pids);
-
-	mutex_unlock(&fdtv->demux_mutex);
-
-	return ret;
-}
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-int fdtv_dvb_register(struct firedtv *fdtv, const char *name)
-{
-	int err;
-
-	err = dvb_register_adapter(&fdtv->adapter, name,
-				   THIS_MODULE, fdtv->device, adapter_nr);
-	if (err < 0)
-		goto fail_log;
-
-	/*DMX_TS_FILTERING | DMX_SECTION_FILTERING*/
-	fdtv->demux.dmx.capabilities = 0;
-
-	fdtv->demux.priv	= fdtv;
-	fdtv->demux.filternum	= 16;
-	fdtv->demux.feednum	= 16;
-	fdtv->demux.start_feed	= fdtv_start_feed;
-	fdtv->demux.stop_feed	= fdtv_stop_feed;
-	fdtv->demux.write_to_decoder = NULL;
-
-	err = dvb_dmx_init(&fdtv->demux);
-	if (err)
-		goto fail_unreg_adapter;
-
-	fdtv->dmxdev.filternum    = 16;
-	fdtv->dmxdev.demux        = &fdtv->demux.dmx;
-	fdtv->dmxdev.capabilities = 0;
-
-	err = dvb_dmxdev_init(&fdtv->dmxdev, &fdtv->adapter);
-	if (err)
-		goto fail_dmx_release;
-
-	fdtv->frontend.source = DMX_FRONTEND_0;
-
-	err = fdtv->demux.dmx.add_frontend(&fdtv->demux.dmx, &fdtv->frontend);
-	if (err)
-		goto fail_dmxdev_release;
-
-	err = fdtv->demux.dmx.connect_frontend(&fdtv->demux.dmx,
-					       &fdtv->frontend);
-	if (err)
-		goto fail_rem_frontend;
-
-	err = dvb_net_init(&fdtv->adapter, &fdtv->dvbnet, &fdtv->demux.dmx);
-	if (err)
-		goto fail_disconnect_frontend;
-
-	fdtv_frontend_init(fdtv, name);
-	err = dvb_register_frontend(&fdtv->adapter, &fdtv->fe);
-	if (err)
-		goto fail_net_release;
-
-	err = fdtv_ca_register(fdtv);
-	if (err)
-		dev_info(fdtv->device,
-			 "Conditional Access Module not enabled\n");
-	return 0;
-
-fail_net_release:
-	dvb_net_release(&fdtv->dvbnet);
-fail_disconnect_frontend:
-	fdtv->demux.dmx.close(&fdtv->demux.dmx);
-fail_rem_frontend:
-	fdtv->demux.dmx.remove_frontend(&fdtv->demux.dmx, &fdtv->frontend);
-fail_dmxdev_release:
-	dvb_dmxdev_release(&fdtv->dmxdev);
-fail_dmx_release:
-	dvb_dmx_release(&fdtv->demux);
-fail_unreg_adapter:
-	dvb_unregister_adapter(&fdtv->adapter);
-fail_log:
-	dev_err(fdtv->device, "DVB initialization failed\n");
-	return err;
-}
-
-void fdtv_dvb_unregister(struct firedtv *fdtv)
-{
-	fdtv_ca_release(fdtv);
-	dvb_unregister_frontend(&fdtv->fe);
-	dvb_net_release(&fdtv->dvbnet);
-	fdtv->demux.dmx.close(&fdtv->demux.dmx);
-	fdtv->demux.dmx.remove_frontend(&fdtv->demux.dmx, &fdtv->frontend);
-	dvb_dmxdev_release(&fdtv->dmxdev);
-	dvb_dmx_release(&fdtv->demux);
-	dvb_unregister_adapter(&fdtv->adapter);
-}
diff --git a/drivers/media/dvb/firewire/firedtv-fe.c b/drivers/media/dvb/firewire/firedtv-fe.c
deleted file mode 100644
index 6fe9793..0000000
--- a/drivers/media/dvb/firewire/firedtv-fe.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * FireDTV driver (formerly known as FireSAT)
- *
- * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
- * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation; either version 2 of
- *	the License, or (at your option) any later version.
- */
-
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/types.h>
-
-#include <dvb_frontend.h>
-
-#include "firedtv.h"
-
-static int fdtv_dvb_init(struct dvb_frontend *fe)
-{
-	struct firedtv *fdtv = fe->sec_priv;
-	int err;
-
-	/* FIXME - allocate free channel at IRM */
-	fdtv->isochannel = fdtv->adapter.num;
-
-	err = cmp_establish_pp_connection(fdtv, fdtv->subunit,
-					  fdtv->isochannel);
-	if (err) {
-		dev_err(fdtv->device,
-			"could not establish point to point connection\n");
-		return err;
-	}
-
-	return fdtv_start_iso(fdtv);
-}
-
-static int fdtv_sleep(struct dvb_frontend *fe)
-{
-	struct firedtv *fdtv = fe->sec_priv;
-
-	fdtv_stop_iso(fdtv);
-	cmp_break_pp_connection(fdtv, fdtv->subunit, fdtv->isochannel);
-	fdtv->isochannel = -1;
-	return 0;
-}
-
-#define LNBCONTROL_DONTCARE 0xff
-
-static int fdtv_diseqc_send_master_cmd(struct dvb_frontend *fe,
-				       struct dvb_diseqc_master_cmd *cmd)
-{
-	struct firedtv *fdtv = fe->sec_priv;
-
-	return avc_lnb_control(fdtv, LNBCONTROL_DONTCARE, LNBCONTROL_DONTCARE,
-			       LNBCONTROL_DONTCARE, 1, cmd);
-}
-
-static int fdtv_diseqc_send_burst(struct dvb_frontend *fe,
-				  fe_sec_mini_cmd_t minicmd)
-{
-	return 0;
-}
-
-static int fdtv_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
-{
-	struct firedtv *fdtv = fe->sec_priv;
-
-	fdtv->tone = tone;
-	return 0;
-}
-
-static int fdtv_set_voltage(struct dvb_frontend *fe,
-			    fe_sec_voltage_t voltage)
-{
-	struct firedtv *fdtv = fe->sec_priv;
-
-	fdtv->voltage = voltage;
-	return 0;
-}
-
-static int fdtv_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct firedtv *fdtv = fe->sec_priv;
-	struct firedtv_tuner_status stat;
-
-	if (avc_tuner_status(fdtv, &stat))
-		return -EINVAL;
-
-	if (stat.no_rf)
-		*status = 0;
-	else
-		*status = FE_HAS_SIGNAL | FE_HAS_VITERBI | FE_HAS_SYNC |
-			  FE_HAS_CARRIER | FE_HAS_LOCK;
-	return 0;
-}
-
-static int fdtv_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct firedtv *fdtv = fe->sec_priv;
-	struct firedtv_tuner_status stat;
-
-	if (avc_tuner_status(fdtv, &stat))
-		return -EINVAL;
-
-	*ber = stat.ber;
-	return 0;
-}
-
-static int fdtv_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	struct firedtv *fdtv = fe->sec_priv;
-	struct firedtv_tuner_status stat;
-
-	if (avc_tuner_status(fdtv, &stat))
-		return -EINVAL;
-
-	*strength = stat.signal_strength << 8;
-	return 0;
-}
-
-static int fdtv_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct firedtv *fdtv = fe->sec_priv;
-	struct firedtv_tuner_status stat;
-
-	if (avc_tuner_status(fdtv, &stat))
-		return -EINVAL;
-
-	/* C/N[dB] = -10 * log10(snr / 65535) */
-	*snr = stat.carrier_noise_ratio * 257;
-	return 0;
-}
-
-static int fdtv_read_uncorrected_blocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	return -EOPNOTSUPP;
-}
-
-static int fdtv_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct firedtv *fdtv = fe->sec_priv;
-
-	return avc_tuner_dsd(fdtv, p);
-}
-
-void fdtv_frontend_init(struct firedtv *fdtv, const char *name)
-{
-	struct dvb_frontend_ops *ops = &fdtv->fe.ops;
-	struct dvb_frontend_info *fi = &ops->info;
-
-	ops->init			= fdtv_dvb_init;
-	ops->sleep			= fdtv_sleep;
-
-	ops->set_frontend		= fdtv_set_frontend;
-
-	ops->read_status		= fdtv_read_status;
-	ops->read_ber			= fdtv_read_ber;
-	ops->read_signal_strength	= fdtv_read_signal_strength;
-	ops->read_snr			= fdtv_read_snr;
-	ops->read_ucblocks		= fdtv_read_uncorrected_blocks;
-
-	ops->diseqc_send_master_cmd 	= fdtv_diseqc_send_master_cmd;
-	ops->diseqc_send_burst		= fdtv_diseqc_send_burst;
-	ops->set_tone			= fdtv_set_tone;
-	ops->set_voltage		= fdtv_set_voltage;
-
-	switch (fdtv->type) {
-	case FIREDTV_DVB_S:
-		ops->delsys[0]		= SYS_DVBS;
-
-		fi->frequency_min	= 950000;
-		fi->frequency_max	= 2150000;
-		fi->frequency_stepsize	= 125;
-		fi->symbol_rate_min	= 1000000;
-		fi->symbol_rate_max	= 40000000;
-
-		fi->caps		= FE_CAN_INVERSION_AUTO |
-					  FE_CAN_FEC_1_2	|
-					  FE_CAN_FEC_2_3	|
-					  FE_CAN_FEC_3_4	|
-					  FE_CAN_FEC_5_6	|
-					  FE_CAN_FEC_7_8	|
-					  FE_CAN_FEC_AUTO	|
-					  FE_CAN_QPSK;
-		break;
-
-	case FIREDTV_DVB_S2:
-		ops->delsys[0]		= SYS_DVBS;
-		ops->delsys[1]		= SYS_DVBS2;
-
-		fi->frequency_min	= 950000;
-		fi->frequency_max	= 2150000;
-		fi->frequency_stepsize	= 125;
-		fi->symbol_rate_min	= 1000000;
-		fi->symbol_rate_max	= 40000000;
-
-		fi->caps		= FE_CAN_INVERSION_AUTO |
-					  FE_CAN_FEC_1_2        |
-					  FE_CAN_FEC_2_3        |
-					  FE_CAN_FEC_3_4        |
-					  FE_CAN_FEC_5_6        |
-					  FE_CAN_FEC_7_8        |
-					  FE_CAN_FEC_AUTO       |
-					  FE_CAN_QPSK           |
-					  FE_CAN_2G_MODULATION;
-		break;
-
-	case FIREDTV_DVB_C:
-		ops->delsys[0]		= SYS_DVBC_ANNEX_A;
-
-		fi->frequency_min	= 47000000;
-		fi->frequency_max	= 866000000;
-		fi->frequency_stepsize	= 62500;
-		fi->symbol_rate_min	= 870000;
-		fi->symbol_rate_max	= 6900000;
-
-		fi->caps 		= FE_CAN_INVERSION_AUTO |
-					  FE_CAN_QAM_16		|
-					  FE_CAN_QAM_32		|
-					  FE_CAN_QAM_64		|
-					  FE_CAN_QAM_128	|
-					  FE_CAN_QAM_256	|
-					  FE_CAN_QAM_AUTO;
-		break;
-
-	case FIREDTV_DVB_T:
-		ops->delsys[0]		= SYS_DVBT;
-
-		fi->frequency_min	= 49000000;
-		fi->frequency_max	= 861000000;
-		fi->frequency_stepsize	= 62500;
-
-		fi->caps 		= FE_CAN_INVERSION_AUTO		|
-					  FE_CAN_FEC_2_3		|
-					  FE_CAN_TRANSMISSION_MODE_AUTO |
-					  FE_CAN_GUARD_INTERVAL_AUTO	|
-					  FE_CAN_HIERARCHY_AUTO;
-		break;
-
-	default:
-		dev_err(fdtv->device, "no frontend for model type %d\n",
-			fdtv->type);
-	}
-	strcpy(fi->name, name);
-
-	fdtv->fe.dvb = &fdtv->adapter;
-	fdtv->fe.sec_priv = fdtv;
-}
diff --git a/drivers/media/dvb/firewire/firedtv-fw.c b/drivers/media/dvb/firewire/firedtv-fw.c
deleted file mode 100644
index e24ec53..0000000
--- a/drivers/media/dvb/firewire/firedtv-fw.c
+++ /dev/null
@@ -1,429 +0,0 @@
-/*
- * FireDTV driver -- firewire I/O backend
- */
-
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/firewire.h>
-#include <linux/firewire-constants.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/mm.h>
-#include <linux/mod_devicetable.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-#include <linux/workqueue.h>
-
-#include <asm/page.h>
-
-#include <dvb_demux.h>
-
-#include "firedtv.h"
-
-static LIST_HEAD(node_list);
-static DEFINE_SPINLOCK(node_list_lock);
-
-static inline struct fw_device *device_of(struct firedtv *fdtv)
-{
-	return fw_device(fdtv->device->parent);
-}
-
-static int node_req(struct firedtv *fdtv, u64 addr, void *data, size_t len,
-		    int tcode)
-{
-	struct fw_device *device = device_of(fdtv);
-	int rcode, generation = device->generation;
-
-	smp_rmb(); /* node_id vs. generation */
-
-	rcode = fw_run_transaction(device->card, tcode, device->node_id,
-			generation, device->max_speed, addr, data, len);
-
-	return rcode != RCODE_COMPLETE ? -EIO : 0;
-}
-
-int fdtv_lock(struct firedtv *fdtv, u64 addr, void *data)
-{
-	return node_req(fdtv, addr, data, 8, TCODE_LOCK_COMPARE_SWAP);
-}
-
-int fdtv_read(struct firedtv *fdtv, u64 addr, void *data)
-{
-	return node_req(fdtv, addr, data, 4, TCODE_READ_QUADLET_REQUEST);
-}
-
-int fdtv_write(struct firedtv *fdtv, u64 addr, void *data, size_t len)
-{
-	return node_req(fdtv, addr, data, len, TCODE_WRITE_BLOCK_REQUEST);
-}
-
-#define ISO_HEADER_SIZE			4
-#define CIP_HEADER_SIZE			8
-#define MPEG2_TS_HEADER_SIZE		4
-#define MPEG2_TS_SOURCE_PACKET_SIZE	(4 + 188)
-
-#define MAX_PACKET_SIZE		1024  /* 776, rounded up to 2^n */
-#define PACKETS_PER_PAGE	(PAGE_SIZE / MAX_PACKET_SIZE)
-#define N_PACKETS		64    /* buffer size */
-#define N_PAGES			DIV_ROUND_UP(N_PACKETS, PACKETS_PER_PAGE)
-#define IRQ_INTERVAL		16
-
-struct fdtv_ir_context {
-	struct fw_iso_context *context;
-	struct fw_iso_buffer buffer;
-	int interrupt_packet;
-	int current_packet;
-	char *pages[N_PAGES];
-};
-
-static int queue_iso(struct fdtv_ir_context *ctx, int index)
-{
-	struct fw_iso_packet p;
-
-	p.payload_length = MAX_PACKET_SIZE;
-	p.interrupt = !(++ctx->interrupt_packet & (IRQ_INTERVAL - 1));
-	p.skip = 0;
-	p.header_length = ISO_HEADER_SIZE;
-
-	return fw_iso_context_queue(ctx->context, &p, &ctx->buffer,
-				    index * MAX_PACKET_SIZE);
-}
-
-static void handle_iso(struct fw_iso_context *context, u32 cycle,
-		       size_t header_length, void *header, void *data)
-{
-	struct firedtv *fdtv = data;
-	struct fdtv_ir_context *ctx = fdtv->ir_context;
-	__be32 *h, *h_end;
-	int length, err, i = ctx->current_packet;
-	char *p, *p_end;
-
-	for (h = header, h_end = h + header_length / 4; h < h_end; h++) {
-		length = be32_to_cpup(h) >> 16;
-		if (unlikely(length > MAX_PACKET_SIZE)) {
-			dev_err(fdtv->device, "length = %d\n", length);
-			length = MAX_PACKET_SIZE;
-		}
-
-		p = ctx->pages[i / PACKETS_PER_PAGE]
-				+ (i % PACKETS_PER_PAGE) * MAX_PACKET_SIZE;
-		p_end = p + length;
-
-		for (p += CIP_HEADER_SIZE + MPEG2_TS_HEADER_SIZE; p < p_end;
-		     p += MPEG2_TS_SOURCE_PACKET_SIZE)
-			dvb_dmx_swfilter_packets(&fdtv->demux, p, 1);
-
-		err = queue_iso(ctx, i);
-		if (unlikely(err))
-			dev_err(fdtv->device, "requeue failed\n");
-
-		i = (i + 1) & (N_PACKETS - 1);
-	}
-	fw_iso_context_queue_flush(ctx->context);
-	ctx->current_packet = i;
-}
-
-int fdtv_start_iso(struct firedtv *fdtv)
-{
-	struct fdtv_ir_context *ctx;
-	struct fw_device *device = device_of(fdtv);
-	int i, err;
-
-	ctx = kmalloc(sizeof(*ctx), GFP_KERNEL);
-	if (!ctx)
-		return -ENOMEM;
-
-	ctx->context = fw_iso_context_create(device->card,
-			FW_ISO_CONTEXT_RECEIVE, fdtv->isochannel,
-			device->max_speed, ISO_HEADER_SIZE, handle_iso, fdtv);
-	if (IS_ERR(ctx->context)) {
-		err = PTR_ERR(ctx->context);
-		goto fail_free;
-	}
-
-	err = fw_iso_buffer_init(&ctx->buffer, device->card,
-				 N_PAGES, DMA_FROM_DEVICE);
-	if (err)
-		goto fail_context_destroy;
-
-	ctx->interrupt_packet = 0;
-	ctx->current_packet = 0;
-
-	for (i = 0; i < N_PAGES; i++)
-		ctx->pages[i] = page_address(ctx->buffer.pages[i]);
-
-	for (i = 0; i < N_PACKETS; i++) {
-		err = queue_iso(ctx, i);
-		if (err)
-			goto fail;
-	}
-
-	err = fw_iso_context_start(ctx->context, -1, 0,
-				   FW_ISO_CONTEXT_MATCH_ALL_TAGS);
-	if (err)
-		goto fail;
-
-	fdtv->ir_context = ctx;
-
-	return 0;
-fail:
-	fw_iso_buffer_destroy(&ctx->buffer, device->card);
-fail_context_destroy:
-	fw_iso_context_destroy(ctx->context);
-fail_free:
-	kfree(ctx);
-
-	return err;
-}
-
-void fdtv_stop_iso(struct firedtv *fdtv)
-{
-	struct fdtv_ir_context *ctx = fdtv->ir_context;
-
-	fw_iso_context_stop(ctx->context);
-	fw_iso_buffer_destroy(&ctx->buffer, device_of(fdtv)->card);
-	fw_iso_context_destroy(ctx->context);
-	kfree(ctx);
-}
-
-static void handle_fcp(struct fw_card *card, struct fw_request *request,
-		       int tcode, int destination, int source, int generation,
-		       unsigned long long offset, void *payload, size_t length,
-		       void *callback_data)
-{
-	struct firedtv *f, *fdtv = NULL;
-	struct fw_device *device;
-	unsigned long flags;
-	int su;
-
-	if (length < 2 || (((u8 *)payload)[0] & 0xf0) != 0)
-		return;
-
-	su = ((u8 *)payload)[1] & 0x7;
-
-	spin_lock_irqsave(&node_list_lock, flags);
-	list_for_each_entry(f, &node_list, list) {
-		device = device_of(f);
-		if (device->generation != generation)
-			continue;
-
-		smp_rmb(); /* node_id vs. generation */
-
-		if (device->card == card &&
-		    device->node_id == source &&
-		    (f->subunit == su || (f->subunit == 0 && su == 0x7))) {
-			fdtv = f;
-			break;
-		}
-	}
-	spin_unlock_irqrestore(&node_list_lock, flags);
-
-	if (fdtv)
-		avc_recv(fdtv, payload, length);
-}
-
-static struct fw_address_handler fcp_handler = {
-	.length           = CSR_FCP_END - CSR_FCP_RESPONSE,
-	.address_callback = handle_fcp,
-};
-
-static const struct fw_address_region fcp_region = {
-	.start	= CSR_REGISTER_BASE + CSR_FCP_RESPONSE,
-	.end	= CSR_REGISTER_BASE + CSR_FCP_END,
-};
-
-static const char * const model_names[] = {
-	[FIREDTV_UNKNOWN] = "unknown type",
-	[FIREDTV_DVB_S]   = "FireDTV S/CI",
-	[FIREDTV_DVB_C]   = "FireDTV C/CI",
-	[FIREDTV_DVB_T]   = "FireDTV T/CI",
-	[FIREDTV_DVB_S2]  = "FireDTV S2  ",
-};
-
-/* Adjust the template string if models with longer names appear. */
-#define MAX_MODEL_NAME_LEN sizeof("FireDTV ????")
-
-static int node_probe(struct device *dev)
-{
-	struct firedtv *fdtv;
-	char name[MAX_MODEL_NAME_LEN];
-	int name_len, i, err;
-
-	fdtv = kzalloc(sizeof(*fdtv), GFP_KERNEL);
-	if (!fdtv)
-		return -ENOMEM;
-
-	dev_set_drvdata(dev, fdtv);
-	fdtv->device		= dev;
-	fdtv->isochannel	= -1;
-	fdtv->voltage		= 0xff;
-	fdtv->tone		= 0xff;
-
-	mutex_init(&fdtv->avc_mutex);
-	init_waitqueue_head(&fdtv->avc_wait);
-	mutex_init(&fdtv->demux_mutex);
-	INIT_WORK(&fdtv->remote_ctrl_work, avc_remote_ctrl_work);
-
-	name_len = fw_csr_string(fw_unit(dev)->directory, CSR_MODEL,
-				 name, sizeof(name));
-	for (i = ARRAY_SIZE(model_names); --i; )
-		if (strlen(model_names[i]) <= name_len &&
-		    strncmp(name, model_names[i], name_len) == 0)
-			break;
-	fdtv->type = i;
-
-	err = fdtv_register_rc(fdtv, dev);
-	if (err)
-		goto fail_free;
-
-	spin_lock_irq(&node_list_lock);
-	list_add_tail(&fdtv->list, &node_list);
-	spin_unlock_irq(&node_list_lock);
-
-	err = avc_identify_subunit(fdtv);
-	if (err)
-		goto fail;
-
-	err = fdtv_dvb_register(fdtv, model_names[fdtv->type]);
-	if (err)
-		goto fail;
-
-	avc_register_remote_control(fdtv);
-
-	return 0;
-fail:
-	spin_lock_irq(&node_list_lock);
-	list_del(&fdtv->list);
-	spin_unlock_irq(&node_list_lock);
-	fdtv_unregister_rc(fdtv);
-fail_free:
-	kfree(fdtv);
-
-	return err;
-}
-
-static int node_remove(struct device *dev)
-{
-	struct firedtv *fdtv = dev_get_drvdata(dev);
-
-	fdtv_dvb_unregister(fdtv);
-
-	spin_lock_irq(&node_list_lock);
-	list_del(&fdtv->list);
-	spin_unlock_irq(&node_list_lock);
-
-	fdtv_unregister_rc(fdtv);
-
-	kfree(fdtv);
-	return 0;
-}
-
-static void node_update(struct fw_unit *unit)
-{
-	struct firedtv *fdtv = dev_get_drvdata(&unit->device);
-
-	if (fdtv->isochannel >= 0)
-		cmp_establish_pp_connection(fdtv, fdtv->subunit,
-					    fdtv->isochannel);
-}
-
-#define MATCH_FLAGS (IEEE1394_MATCH_VENDOR_ID | IEEE1394_MATCH_MODEL_ID | \
-		     IEEE1394_MATCH_SPECIFIER_ID | IEEE1394_MATCH_VERSION)
-
-#define DIGITAL_EVERYWHERE_OUI	0x001287
-#define AVC_UNIT_SPEC_ID_ENTRY	0x00a02d
-#define AVC_SW_VERSION_ENTRY	0x010001
-
-static const struct ieee1394_device_id fdtv_id_table[] = {
-	{
-		/* FloppyDTV S/CI and FloppyDTV S2 */
-		.match_flags	= MATCH_FLAGS,
-		.vendor_id	= DIGITAL_EVERYWHERE_OUI,
-		.model_id	= 0x000024,
-		.specifier_id	= AVC_UNIT_SPEC_ID_ENTRY,
-		.version	= AVC_SW_VERSION_ENTRY,
-	}, {
-		/* FloppyDTV T/CI */
-		.match_flags	= MATCH_FLAGS,
-		.vendor_id	= DIGITAL_EVERYWHERE_OUI,
-		.model_id	= 0x000025,
-		.specifier_id	= AVC_UNIT_SPEC_ID_ENTRY,
-		.version	= AVC_SW_VERSION_ENTRY,
-	}, {
-		/* FloppyDTV C/CI */
-		.match_flags	= MATCH_FLAGS,
-		.vendor_id	= DIGITAL_EVERYWHERE_OUI,
-		.model_id	= 0x000026,
-		.specifier_id	= AVC_UNIT_SPEC_ID_ENTRY,
-		.version	= AVC_SW_VERSION_ENTRY,
-	}, {
-		/* FireDTV S/CI and FloppyDTV S2 */
-		.match_flags	= MATCH_FLAGS,
-		.vendor_id	= DIGITAL_EVERYWHERE_OUI,
-		.model_id	= 0x000034,
-		.specifier_id	= AVC_UNIT_SPEC_ID_ENTRY,
-		.version	= AVC_SW_VERSION_ENTRY,
-	}, {
-		/* FireDTV T/CI */
-		.match_flags	= MATCH_FLAGS,
-		.vendor_id	= DIGITAL_EVERYWHERE_OUI,
-		.model_id	= 0x000035,
-		.specifier_id	= AVC_UNIT_SPEC_ID_ENTRY,
-		.version	= AVC_SW_VERSION_ENTRY,
-	}, {
-		/* FireDTV C/CI */
-		.match_flags	= MATCH_FLAGS,
-		.vendor_id	= DIGITAL_EVERYWHERE_OUI,
-		.model_id	= 0x000036,
-		.specifier_id	= AVC_UNIT_SPEC_ID_ENTRY,
-		.version	= AVC_SW_VERSION_ENTRY,
-	}, {}
-};
-MODULE_DEVICE_TABLE(ieee1394, fdtv_id_table);
-
-static struct fw_driver fdtv_driver = {
-	.driver   = {
-		.owner  = THIS_MODULE,
-		.name   = "firedtv",
-		.bus    = &fw_bus_type,
-		.probe  = node_probe,
-		.remove = node_remove,
-	},
-	.update   = node_update,
-	.id_table = fdtv_id_table,
-};
-
-static int __init fdtv_init(void)
-{
-	int ret;
-
-	ret = fw_core_add_address_handler(&fcp_handler, &fcp_region);
-	if (ret < 0)
-		return ret;
-
-	ret = driver_register(&fdtv_driver.driver);
-	if (ret < 0)
-		fw_core_remove_address_handler(&fcp_handler);
-
-	return ret;
-}
-
-static void __exit fdtv_exit(void)
-{
-	driver_unregister(&fdtv_driver.driver);
-	fw_core_remove_address_handler(&fcp_handler);
-}
-
-module_init(fdtv_init);
-module_exit(fdtv_exit);
-
-MODULE_AUTHOR("Andreas Monitzer <andy@monitzer.com>");
-MODULE_AUTHOR("Ben Backx <ben@bbackx.com>");
-MODULE_DESCRIPTION("FireDTV DVB Driver");
-MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("FireDTV DVB");
diff --git a/drivers/media/dvb/firewire/firedtv-rc.c b/drivers/media/dvb/firewire/firedtv-rc.c
deleted file mode 100644
index f82d4a9..0000000
--- a/drivers/media/dvb/firewire/firedtv-rc.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * FireDTV driver (formerly known as FireSAT)
- *
- * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation; either version 2 of
- *	the License, or (at your option) any later version.
- */
-
-#include <linux/bitops.h>
-#include <linux/input.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/workqueue.h>
-
-#include "firedtv.h"
-
-/* fixed table with older keycodes, geared towards MythTV */
-static const u16 oldtable[] = {
-
-	/* code from device: 0x4501...0x451f */
-
-	KEY_ESC,
-	KEY_F9,
-	KEY_1,
-	KEY_2,
-	KEY_3,
-	KEY_4,
-	KEY_5,
-	KEY_6,
-	KEY_7,
-	KEY_8,
-	KEY_9,
-	KEY_I,
-	KEY_0,
-	KEY_ENTER,
-	KEY_RED,
-	KEY_UP,
-	KEY_GREEN,
-	KEY_F10,
-	KEY_SPACE,
-	KEY_F11,
-	KEY_YELLOW,
-	KEY_DOWN,
-	KEY_BLUE,
-	KEY_Z,
-	KEY_P,
-	KEY_PAGEDOWN,
-	KEY_LEFT,
-	KEY_W,
-	KEY_RIGHT,
-	KEY_P,
-	KEY_M,
-
-	/* code from device: 0x4540...0x4542 */
-
-	KEY_R,
-	KEY_V,
-	KEY_C,
-};
-
-/* user-modifiable table for a remote as sold in 2008 */
-static const u16 keytable[] = {
-
-	/* code from device: 0x0300...0x031f */
-
-	[0x00] = KEY_POWER,
-	[0x01] = KEY_SLEEP,
-	[0x02] = KEY_STOP,
-	[0x03] = KEY_OK,
-	[0x04] = KEY_RIGHT,
-	[0x05] = KEY_1,
-	[0x06] = KEY_2,
-	[0x07] = KEY_3,
-	[0x08] = KEY_LEFT,
-	[0x09] = KEY_4,
-	[0x0a] = KEY_5,
-	[0x0b] = KEY_6,
-	[0x0c] = KEY_UP,
-	[0x0d] = KEY_7,
-	[0x0e] = KEY_8,
-	[0x0f] = KEY_9,
-	[0x10] = KEY_DOWN,
-	[0x11] = KEY_TITLE,	/* "OSD" - fixme */
-	[0x12] = KEY_0,
-	[0x13] = KEY_F20,	/* "16:9" - fixme */
-	[0x14] = KEY_SCREEN,	/* "FULL" - fixme */
-	[0x15] = KEY_MUTE,
-	[0x16] = KEY_SUBTITLE,
-	[0x17] = KEY_RECORD,
-	[0x18] = KEY_TEXT,
-	[0x19] = KEY_AUDIO,
-	[0x1a] = KEY_RED,
-	[0x1b] = KEY_PREVIOUS,
-	[0x1c] = KEY_REWIND,
-	[0x1d] = KEY_PLAYPAUSE,
-	[0x1e] = KEY_NEXT,
-	[0x1f] = KEY_VOLUMEUP,
-
-	/* code from device: 0x0340...0x0354 */
-
-	[0x20] = KEY_CHANNELUP,
-	[0x21] = KEY_F21,	/* "4:3" - fixme */
-	[0x22] = KEY_TV,
-	[0x23] = KEY_DVD,
-	[0x24] = KEY_VCR,
-	[0x25] = KEY_AUX,
-	[0x26] = KEY_GREEN,
-	[0x27] = KEY_YELLOW,
-	[0x28] = KEY_BLUE,
-	[0x29] = KEY_CHANNEL,	/* "CH.LIST" */
-	[0x2a] = KEY_VENDOR,	/* "CI" - fixme */
-	[0x2b] = KEY_VOLUMEDOWN,
-	[0x2c] = KEY_CHANNELDOWN,
-	[0x2d] = KEY_LAST,
-	[0x2e] = KEY_INFO,
-	[0x2f] = KEY_FORWARD,
-	[0x30] = KEY_LIST,
-	[0x31] = KEY_FAVORITES,
-	[0x32] = KEY_MENU,
-	[0x33] = KEY_EPG,
-	[0x34] = KEY_EXIT,
-};
-
-int fdtv_register_rc(struct firedtv *fdtv, struct device *dev)
-{
-	struct input_dev *idev;
-	int i, err;
-
-	idev = input_allocate_device();
-	if (!idev)
-		return -ENOMEM;
-
-	fdtv->remote_ctrl_dev = idev;
-	idev->name = "FireDTV remote control";
-	idev->dev.parent = dev;
-	idev->evbit[0] = BIT_MASK(EV_KEY);
-	idev->keycode = kmemdup(keytable, sizeof(keytable), GFP_KERNEL);
-	if (!idev->keycode) {
-		err = -ENOMEM;
-		goto fail;
-	}
-	idev->keycodesize = sizeof(keytable[0]);
-	idev->keycodemax = ARRAY_SIZE(keytable);
-
-	for (i = 0; i < ARRAY_SIZE(keytable); i++)
-		set_bit(keytable[i], idev->keybit);
-
-	err = input_register_device(idev);
-	if (err)
-		goto fail_free_keymap;
-
-	return 0;
-
-fail_free_keymap:
-	kfree(idev->keycode);
-fail:
-	input_free_device(idev);
-	return err;
-}
-
-void fdtv_unregister_rc(struct firedtv *fdtv)
-{
-	cancel_work_sync(&fdtv->remote_ctrl_work);
-	kfree(fdtv->remote_ctrl_dev->keycode);
-	input_unregister_device(fdtv->remote_ctrl_dev);
-}
-
-void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code)
-{
-	struct input_dev *idev = fdtv->remote_ctrl_dev;
-	u16 *keycode = idev->keycode;
-
-	if (code >= 0x0300 && code <= 0x031f)
-		code = keycode[code - 0x0300];
-	else if (code >= 0x0340 && code <= 0x0354)
-		code = keycode[code - 0x0320];
-	else if (code >= 0x4501 && code <= 0x451f)
-		code = oldtable[code - 0x4501];
-	else if (code >= 0x4540 && code <= 0x4542)
-		code = oldtable[code - 0x4521];
-	else {
-		printk(KERN_DEBUG "firedtv: invalid key code 0x%04x "
-		       "from remote control\n", code);
-		return;
-	}
-
-	input_report_key(idev, code, 1);
-	input_sync(idev);
-	input_report_key(idev, code, 0);
-	input_sync(idev);
-}
diff --git a/drivers/media/dvb/firewire/firedtv.h b/drivers/media/dvb/firewire/firedtv.h
deleted file mode 100644
index 4fdcd8c..0000000
--- a/drivers/media/dvb/firewire/firedtv.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * FireDTV driver (formerly known as FireSAT)
- *
- * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
- * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation; either version 2 of
- *	the License, or (at your option) any later version.
- */
-
-#ifndef _FIREDTV_H
-#define _FIREDTV_H
-
-#include <linux/dvb/dmx.h>
-#include <linux/dvb/frontend.h>
-#include <linux/list.h>
-#include <linux/mod_devicetable.h>
-#include <linux/mutex.h>
-#include <linux/spinlock_types.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-#include <linux/workqueue.h>
-
-#include <demux.h>
-#include <dmxdev.h>
-#include <dvb_demux.h>
-#include <dvb_frontend.h>
-#include <dvb_net.h>
-#include <dvbdev.h>
-
-struct firedtv_tuner_status {
-	unsigned active_system:8;
-	unsigned searching:1;
-	unsigned moving:1;
-	unsigned no_rf:1;
-	unsigned input:1;
-	unsigned selected_antenna:7;
-	unsigned ber:32;
-	unsigned signal_strength:8;
-	unsigned raster_frequency:2;
-	unsigned rf_frequency:22;
-	unsigned man_dep_info_length:8;
-	unsigned front_end_error:1;
-	unsigned antenna_error:1;
-	unsigned front_end_power_status:1;
-	unsigned power_supply:1;
-	unsigned carrier_noise_ratio:16;
-	unsigned power_supply_voltage:8;
-	unsigned antenna_voltage:8;
-	unsigned firewire_bus_voltage:8;
-	unsigned ca_mmi:1;
-	unsigned ca_pmt_reply:1;
-	unsigned ca_date_time_request:1;
-	unsigned ca_application_info:1;
-	unsigned ca_module_present_status:1;
-	unsigned ca_dvb_flag:1;
-	unsigned ca_error_flag:1;
-	unsigned ca_initialization_status:1;
-};
-
-enum model_type {
-	FIREDTV_UNKNOWN = 0,
-	FIREDTV_DVB_S   = 1,
-	FIREDTV_DVB_C   = 2,
-	FIREDTV_DVB_T   = 3,
-	FIREDTV_DVB_S2  = 4,
-};
-
-struct device;
-struct input_dev;
-struct fdtv_ir_context;
-
-struct firedtv {
-	struct device *device;
-	struct list_head list;
-
-	struct dvb_adapter	adapter;
-	struct dmxdev		dmxdev;
-	struct dvb_demux	demux;
-	struct dmx_frontend	frontend;
-	struct dvb_net		dvbnet;
-	struct dvb_frontend	fe;
-
-	struct dvb_device	*cadev;
-	int			ca_last_command;
-	int			ca_time_interval;
-
-	struct mutex		avc_mutex;
-	wait_queue_head_t	avc_wait;
-	bool			avc_reply_received;
-	struct work_struct	remote_ctrl_work;
-	struct input_dev	*remote_ctrl_dev;
-
-	enum model_type		type;
-	char			subunit;
-	char			isochannel;
-	struct fdtv_ir_context	*ir_context;
-
-	fe_sec_voltage_t	voltage;
-	fe_sec_tone_mode_t	tone;
-
-	struct mutex		demux_mutex;
-	unsigned long		channel_active;
-	u16			channel_pid[16];
-
-	int			avc_data_length;
-	u8			avc_data[512];
-};
-
-/* firedtv-avc.c */
-int avc_recv(struct firedtv *fdtv, void *data, size_t length);
-int avc_tuner_status(struct firedtv *fdtv, struct firedtv_tuner_status *stat);
-struct dtv_frontend_properties;
-int avc_tuner_dsd(struct firedtv *fdtv, struct dtv_frontend_properties *params);
-int avc_tuner_set_pids(struct firedtv *fdtv, unsigned char pidc, u16 pid[]);
-int avc_tuner_get_ts(struct firedtv *fdtv);
-int avc_identify_subunit(struct firedtv *fdtv);
-struct dvb_diseqc_master_cmd;
-int avc_lnb_control(struct firedtv *fdtv, char voltage, char burst,
-		    char conttone, char nrdiseq,
-		    struct dvb_diseqc_master_cmd *diseqcmd);
-void avc_remote_ctrl_work(struct work_struct *work);
-int avc_register_remote_control(struct firedtv *fdtv);
-int avc_ca_app_info(struct firedtv *fdtv, char *app_info, unsigned int *len);
-int avc_ca_info(struct firedtv *fdtv, char *app_info, unsigned int *len);
-int avc_ca_reset(struct firedtv *fdtv);
-int avc_ca_pmt(struct firedtv *fdtv, char *app_info, int length);
-int avc_ca_get_time_date(struct firedtv *fdtv, int *interval);
-int avc_ca_enter_menu(struct firedtv *fdtv);
-int avc_ca_get_mmi(struct firedtv *fdtv, char *mmi_object, unsigned int *len);
-int cmp_establish_pp_connection(struct firedtv *fdtv, int plug, int channel);
-void cmp_break_pp_connection(struct firedtv *fdtv, int plug, int channel);
-
-/* firedtv-ci.c */
-int fdtv_ca_register(struct firedtv *fdtv);
-void fdtv_ca_release(struct firedtv *fdtv);
-
-/* firedtv-dvb.c */
-int fdtv_start_feed(struct dvb_demux_feed *dvbdmxfeed);
-int fdtv_stop_feed(struct dvb_demux_feed *dvbdmxfeed);
-int fdtv_dvb_register(struct firedtv *fdtv, const char *name);
-void fdtv_dvb_unregister(struct firedtv *fdtv);
-
-/* firedtv-fe.c */
-void fdtv_frontend_init(struct firedtv *fdtv, const char *name);
-
-/* firedtv-fw.c */
-int fdtv_lock(struct firedtv *fdtv, u64 addr, void *data);
-int fdtv_read(struct firedtv *fdtv, u64 addr, void *data);
-int fdtv_write(struct firedtv *fdtv, u64 addr, void *data, size_t len);
-int fdtv_start_iso(struct firedtv *fdtv);
-void fdtv_stop_iso(struct firedtv *fdtv);
-
-/* firedtv-rc.c */
-#ifdef CONFIG_DVB_FIREDTV_INPUT
-int fdtv_register_rc(struct firedtv *fdtv, struct device *dev);
-void fdtv_unregister_rc(struct firedtv *fdtv);
-void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code);
-#else
-static inline int fdtv_register_rc(struct firedtv *fdtv,
-				   struct device *dev) { return 0; }
-static inline void fdtv_unregister_rc(struct firedtv *fdtv) {}
-static inline void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code) {}
-#endif
-
-#endif /* _FIREDTV_H */
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
deleted file mode 100644
index a08c215..0000000
--- a/drivers/media/dvb/frontends/Kconfig
+++ /dev/null
@@ -1,756 +0,0 @@
-config DVB_FE_CUSTOMISE
-	bool "Customise the frontend modules to build"
-	depends on DVB_CORE
-	depends on EXPERT
-	default y if EXPERT
-	help
-	  This allows the user to select/deselect frontend drivers for their
-	  hardware from the build.
-
-	  Use this option with care as deselecting frontends which are in fact
-	  necessary will result in DVB devices which cannot be tuned due to lack
-	  of driver support.
-
-	  If unsure say N.
-
-menu "Customise DVB Frontends"
-	visible if DVB_FE_CUSTOMISE
-
-comment "Multistandard (satellite) frontends"
-	depends on DVB_CORE
-
-config DVB_STB0899
-	tristate "STB0899 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S/S2/DSS Multistandard demodulator. Say Y when you want
-	  to support this demodulator based frontends
-
-config DVB_STB6100
-	tristate "STB6100 based tuners"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A Silicon tuner from ST used in conjunction with the STB0899
-	  demodulator. Say Y when you want to support this tuner.
-
-config DVB_STV090x
-	tristate "STV0900/STV0903(A/B) based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  DVB-S/S2/DSS Multistandard Professional/Broadcast demodulators.
-	  Say Y when you want to support these frontends.
-
-config DVB_STV6110x
-	tristate "STV6110/(A) based tuners"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A Silicon tuner that supports DVB-S and DVB-S2 modes
-
-comment "Multistandard (cable + terrestrial) frontends"
-	depends on DVB_CORE
-
-config DVB_DRXK
-	tristate "Micronas DRXK based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  Micronas DRX-K DVB-C/T demodulator.
-
-	  Say Y when you want to support this frontend.
-
-config DVB_TDA18271C2DD
-	tristate "NXP TDA18271C2 silicon tuner"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  NXP TDA18271 silicon tuner.
-
-	  Say Y when you want to support this tuner.
-
-comment "DVB-S (satellite) frontends"
-	depends on DVB_CORE
-
-config DVB_CX24110
-	tristate "Conexant CX24110 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S tuner module. Say Y when you want to support this frontend.
-
-config DVB_CX24123
-	tristate "Conexant CX24123 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S tuner module. Say Y when you want to support this frontend.
-
-config DVB_MT312
-	tristate "Zarlink VP310/MT312/ZL10313 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S tuner module. Say Y when you want to support this frontend.
-
-config DVB_ZL10036
-	tristate "Zarlink ZL10036 silicon tuner"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S tuner module. Say Y when you want to support this frontend.
-
-config DVB_ZL10039
-	tristate "Zarlink ZL10039 silicon tuner"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S tuner module. Say Y when you want to support this frontend.
-
-config DVB_S5H1420
-	tristate "Samsung S5H1420 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S tuner module. Say Y when you want to support this frontend.
-
-config DVB_STV0288
-	tristate "ST STV0288 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S tuner module. Say Y when you want to support this frontend.
-
-config DVB_STB6000
-	tristate "ST STB6000 silicon tuner"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	  help
-	  A DVB-S silicon tuner module. Say Y when you want to support this tuner.
-
-config DVB_STV0299
-	tristate "ST STV0299 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S tuner module. Say Y when you want to support this frontend.
-
-config DVB_STV6110
-	tristate "ST STV6110 silicon tuner"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	  help
-	  A DVB-S silicon tuner module. Say Y when you want to support this tuner.
-
-config DVB_STV0900
-	tristate "ST STV0900 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S/S2 demodulator. Say Y when you want to support this frontend.
-
-config DVB_TDA8083
-	tristate "Philips TDA8083 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S tuner module. Say Y when you want to support this frontend.
-
-config DVB_TDA10086
-	tristate "Philips TDA10086 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S tuner module. Say Y when you want to support this frontend.
-
-config DVB_TDA8261
-	tristate "Philips TDA8261 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S tuner module. Say Y when you want to support this frontend.
-
-config DVB_VES1X93
-	tristate "VLSI VES1893 or VES1993 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S tuner module. Say Y when you want to support this frontend.
-
-config DVB_TUNER_ITD1000
-	tristate "Integrant ITD1000 Zero IF tuner for DVB-S/DSS"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S tuner module. Say Y when you want to support this frontend.
-
-config DVB_TUNER_CX24113
-	tristate "Conexant CX24113/CX24128 tuner for DVB-S/DSS"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S tuner module. Say Y when you want to support this frontend.
-
-
-config DVB_TDA826X
-	tristate "Philips TDA826X silicon tuner"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S silicon tuner module. Say Y when you want to support this tuner.
-
-config DVB_TUA6100
-	tristate "Infineon TUA6100 PLL"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S PLL chip.
-
-config DVB_CX24116
-	tristate "Conexant CX24116 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
-
-config DVB_SI21XX
-	tristate "Silicon Labs SI21XX based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S tuner module. Say Y when you want to support this frontend.
-
-config DVB_DS3000
-	tristate "Montage Tehnology DS3000 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
-
-config DVB_MB86A16
-	tristate "Fujitsu MB86A16 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S/DSS Direct Conversion reveiver.
-	  Say Y when you want to support this frontend.
-
-config DVB_TDA10071
-	tristate "NXP TDA10071"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  Say Y when you want to support this frontend.
-
-comment "DVB-T (terrestrial) frontends"
-	depends on DVB_CORE
-
-config DVB_SP8870
-	tristate "Spase sp8870 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-T tuner module. Say Y when you want to support this frontend.
-
-	  This driver needs external firmware. Please use the command
-	  "<kerneldir>/Documentation/dvb/get_dvb_firmware sp8870" to
-	  download/extract it, and then copy it to /usr/lib/hotplug/firmware
-	  or /lib/firmware (depending on configuration of firmware hotplug).
-
-config DVB_SP887X
-	tristate "Spase sp887x based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-T tuner module. Say Y when you want to support this frontend.
-
-	  This driver needs external firmware. Please use the command
-	  "<kerneldir>/Documentation/dvb/get_dvb_firmware sp887x" to
-	  download/extract it, and then copy it to /usr/lib/hotplug/firmware
-	  or /lib/firmware (depending on configuration of firmware hotplug).
-
-config DVB_CX22700
-	tristate "Conexant CX22700 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-T tuner module. Say Y when you want to support this frontend.
-
-config DVB_CX22702
-	tristate "Conexant cx22702 demodulator (OFDM)"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-T tuner module. Say Y when you want to support this frontend.
-
-config DVB_S5H1432
-	tristate "Samsung s5h1432 demodulator (OFDM)"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-T tuner module. Say Y when you want to support this frontend.
-
-config DVB_DRXD
-	tristate "Micronas DRXD driver"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-T tuner module. Say Y when you want to support this frontend.
-
-	  Note: this driver was based on vendor driver reference code (released
-	  under the GPL) as opposed to the existing drx397xd driver, which
-	  was written via reverse engineering.
-
-config DVB_L64781
-	tristate "LSI L64781"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-T tuner module. Say Y when you want to support this frontend.
-
-config DVB_TDA1004X
-	tristate "Philips TDA10045H/TDA10046H based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-T tuner module. Say Y when you want to support this frontend.
-
-	  This driver needs external firmware. Please use the commands
-	  "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10045",
-	  "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10046" to
-	  download/extract them, and then copy them to /usr/lib/hotplug/firmware
-	  or /lib/firmware (depending on configuration of firmware hotplug).
-
-config DVB_NXT6000
-	tristate "NxtWave Communications NXT6000 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-T tuner module. Say Y when you want to support this frontend.
-
-config DVB_MT352
-	tristate "Zarlink MT352 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-T tuner module. Say Y when you want to support this frontend.
-
-config DVB_ZL10353
-	tristate "Zarlink ZL10353 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-T tuner module. Say Y when you want to support this frontend.
-
-config DVB_DIB3000MB
-	tristate "DiBcom 3000M-B"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
-	  to support this frontend.
-
-config DVB_DIB3000MC
-	tristate "DiBcom 3000P/M-C"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
-	  to support this frontend.
-
-config DVB_DIB7000M
-	tristate "DiBcom 7000MA/MB/PA/PB/MC"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
-	  to support this frontend.
-
-config DVB_DIB7000P
-	tristate "DiBcom 7000PC"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
-	  to support this frontend.
-
-config DVB_DIB9000
-	tristate "DiBcom 9000"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
-	  to support this frontend.
-
-config DVB_TDA10048
-	tristate "Philips TDA10048HN based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-T tuner module. Say Y when you want to support this frontend.
-
-config DVB_AF9013
-	tristate "Afatech AF9013 demodulator"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  Say Y when you want to support this frontend.
-
-config DVB_EC100
-	tristate "E3C EC100"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  Say Y when you want to support this frontend.
-
-config DVB_HD29L2
-	tristate "HDIC HD29L2"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  Say Y when you want to support this frontend.
-
-config DVB_STV0367
-	tristate "ST STV0367 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-T/C tuner module. Say Y when you want to support this frontend.
-
-config DVB_CXD2820R
-	tristate "Sony CXD2820R"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  Say Y when you want to support this frontend.
-
-config DVB_RTL2830
-	tristate "Realtek RTL2830 DVB-T"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  Say Y when you want to support this frontend.
-
-config DVB_RTL2832
-	tristate "Realtek RTL2832 DVB-T"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  Say Y when you want to support this frontend.
-
-comment "DVB-C (cable) frontends"
-	depends on DVB_CORE
-
-config DVB_VES1820
-	tristate "VLSI VES1820 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-C tuner module. Say Y when you want to support this frontend.
-
-config DVB_TDA10021
-	tristate "Philips TDA10021 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-C tuner module. Say Y when you want to support this frontend.
-
-config DVB_TDA10023
-	tristate "Philips TDA10023 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-C tuner module. Say Y when you want to support this frontend.
-
-config DVB_STV0297
-	tristate "ST STV0297 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-C tuner module. Say Y when you want to support this frontend.
-
-comment "ATSC (North American/Korean Terrestrial/Cable DTV) frontends"
-	depends on DVB_CORE
-
-config DVB_NXT200X
-	tristate "NxtWave Communications NXT2002/NXT2004 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
-	  to support this frontend.
-
-	  This driver needs external firmware. Please use the commands
-	  "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2002" and
-	  "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2004" to
-	  download/extract them, and then copy them to /usr/lib/hotplug/firmware
-	  or /lib/firmware (depending on configuration of firmware hotplug).
-
-config DVB_OR51211
-	tristate "Oren OR51211 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
-
-	  This driver needs external firmware. Please use the command
-	  "<kerneldir>/Documentation/dvb/get_dvb_firmware or51211" to
-	  download it, and then copy it to /usr/lib/hotplug/firmware
-	  or /lib/firmware (depending on configuration of firmware hotplug).
-
-config DVB_OR51132
-	tristate "Oren OR51132 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
-	  to support this frontend.
-
-	  This driver needs external firmware. Please use the commands
-	  "<kerneldir>/Documentation/dvb/get_dvb_firmware or51132_vsb" and/or
-	  "<kerneldir>/Documentation/dvb/get_dvb_firmware or51132_qam" to
-	  download firmwares for 8VSB and QAM64/256, respectively. Copy them to
-	  /usr/lib/hotplug/firmware or /lib/firmware (depending on
-	  configuration of firmware hotplug).
-
-config DVB_BCM3510
-	tristate "Broadcom BCM3510"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  An ATSC 8VSB/16VSB and QAM64/256 tuner module. Say Y when you want to
-	  support this frontend.
-
-config DVB_LGDT330X
-	tristate "LG Electronics LGDT3302/LGDT3303 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
-	  to support this frontend.
-
-config DVB_LGDT3305
-	tristate "LG Electronics LGDT3304 and LGDT3305 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
-	  to support this frontend.
-
-config DVB_LG2160
-	tristate "LG Electronics LG216x based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  An ATSC/MH demodulator module. Say Y when you want
-	  to support this frontend.
-
-config DVB_S5H1409
-	tristate "Samsung S5H1409 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
-	  to support this frontend.
-
-config DVB_AU8522
-	depends on I2C
-	tristate
-
-config DVB_AU8522_DTV
-	tristate "Auvitek AU8522 based DTV demod"
-	depends on DVB_CORE && I2C
-	select DVB_AU8522
-	default m if DVB_FE_CUSTOMISE
-	help
-	  An ATSC 8VSB, QAM64/256 & NTSC demodulator module. Say Y when
-	  you want to enable DTV demodulation support for this frontend.
-
-config DVB_AU8522_V4L
-	tristate "Auvitek AU8522 based ATV demod"
-	depends on VIDEO_V4L2 && I2C
-	select DVB_AU8522
-	default m if DVB_FE_CUSTOMISE
-	help
-	  An ATSC 8VSB, QAM64/256 & NTSC demodulator module. Say Y when
-	  you want to enable ATV demodulation support for this frontend.
-
-config DVB_S5H1411
-	tristate "Samsung S5H1411 based"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
-	  to support this frontend.
-
-comment "ISDB-T (terrestrial) frontends"
-	depends on DVB_CORE
-
-config DVB_S921
-	tristate "Sharp S921 frontend"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  AN ISDB-T DQPSK, QPSK, 16QAM and 64QAM 1seg tuner module.
-	  Say Y when you want to support this frontend.
-
-config DVB_DIB8000
-	tristate "DiBcom 8000MB/MC"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A driver for DiBcom's DiB8000 ISDB-T/ISDB-Tsb demodulator.
-	  Say Y when you want to support this frontend.
-
-config DVB_MB86A20S
-	tristate "Fujitsu mb86a20s"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A driver for Fujitsu mb86a20s ISDB-T/ISDB-Tsb demodulator.
-	  Say Y when you want to support this frontend.
-
-comment "Digital terrestrial only tuners/PLL"
-	depends on DVB_CORE
-
-config DVB_PLL
-	tristate "Generic I2C PLL based tuners"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  This module drives a number of tuners based on PLL chips with a
-	  common I2C interface. Say Y when you want to support these tuners.
-
-config DVB_TUNER_DIB0070
-	tristate "DiBcom DiB0070 silicon base-band tuner"
-	depends on I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A driver for the silicon baseband tuner DiB0070 from DiBcom.
-	  This device is only used inside a SiP called together with a
-	  demodulator for now.
-
-config DVB_TUNER_DIB0090
-	tristate "DiBcom DiB0090 silicon base-band tuner"
-	depends on I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A driver for the silicon baseband tuner DiB0090 from DiBcom.
-	  This device is only used inside a SiP called together with a
-	  demodulator for now.
-
-comment "SEC control devices for DVB-S"
-	depends on DVB_CORE
-
-config DVB_LNBP21
-	tristate "LNBP21/LNBH24 SEC controllers"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  An SEC control chips.
-
-config DVB_LNBP22
-	tristate "LNBP22 SEC controllers"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  LNB power supply and control voltage
-	  regulator chip with step-up converter
-	  and I2C interface.
-	  Say Y when you want to support this chip.
-
-config DVB_ISL6405
-	tristate "ISL6405 SEC controller"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  An SEC control chip.
-
-config DVB_ISL6421
-	tristate "ISL6421 SEC controller"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  An SEC control chip.
-
-config DVB_ISL6423
-	tristate "ISL6423 SEC controller"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A SEC controller chip from Intersil
-
-config DVB_A8293
-	tristate "Allegro A8293"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-
-config DVB_LGS8GL5
-	tristate "Silicon Legend LGS-8GL5 demodulator (OFDM)"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DMB-TH tuner module. Say Y when you want to support this frontend.
-
-config DVB_LGS8GXX
-	tristate "Legend Silicon LGS8913/LGS8GL5/LGS8GXX DMB-TH demodulator"
-	depends on DVB_CORE && I2C
-	select FW_LOADER
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DMB-TH tuner module. Say Y when you want to support this frontend.
-
-config DVB_ATBM8830
-	tristate "AltoBeam ATBM8830/8831 DMB-TH demodulator"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DMB-TH tuner module. Say Y when you want to support this frontend.
-
-config DVB_TDA665x
-	tristate "TDA665x tuner"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  Support for tuner modules based on Philips TDA6650/TDA6651 chips.
-	  Say Y when you want to support this chip.
-
-	  Currently supported tuners:
-	  * Panasonic ENV57H12D5 (ET-50DT)
-
-config DVB_IX2505V
-	tristate "Sharp IX2505V silicon tuner"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S tuner module. Say Y when you want to support this frontend.
-
-config DVB_IT913X_FE
-	tristate "it913x frontend and it9137 tuner"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-T tuner module.
-	  Say Y when you want to support this frontend.
-
-config DVB_M88RS2000
-	tristate "M88RS2000 DVB-S demodulator and tuner"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-	help
-	  A DVB-S tuner module.
-	  Say Y when you want to support this frontend.
-
-config DVB_AF9033
-	tristate "Afatech AF9033 DVB-T demodulator"
-	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
-
-comment "Tools to develop new frontends"
-
-config DVB_DUMMY_FE
-	tristate "Dummy frontend driver"
-	default n
-endmenu
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
deleted file mode 100644
index 185bb8b..0000000
--- a/drivers/media/dvb/frontends/Makefile
+++ /dev/null
@@ -1,105 +0,0 @@
-#
-# Makefile for the kernel DVB frontend device drivers.
-#
-
-ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core/
-ccflags-y += -I$(srctree)/drivers/media/common/tuners/
-
-stb0899-objs = stb0899_drv.o stb0899_algo.o
-stv0900-objs = stv0900_core.o stv0900_sw.o
-drxd-objs = drxd_firm.o drxd_hard.o
-cxd2820r-objs = cxd2820r_core.o cxd2820r_c.o cxd2820r_t.o cxd2820r_t2.o
-drxk-objs := drxk_hard.o
-
-obj-$(CONFIG_DVB_PLL) += dvb-pll.o
-obj-$(CONFIG_DVB_STV0299) += stv0299.o
-obj-$(CONFIG_DVB_STB0899) += stb0899.o
-obj-$(CONFIG_DVB_STB6100) += stb6100.o
-obj-$(CONFIG_DVB_SP8870) += sp8870.o
-obj-$(CONFIG_DVB_CX22700) += cx22700.o
-obj-$(CONFIG_DVB_S5H1432) += s5h1432.o
-obj-$(CONFIG_DVB_CX24110) += cx24110.o
-obj-$(CONFIG_DVB_TDA8083) += tda8083.o
-obj-$(CONFIG_DVB_L64781) += l64781.o
-obj-$(CONFIG_DVB_DIB3000MB) += dib3000mb.o
-obj-$(CONFIG_DVB_DIB3000MC) += dib3000mc.o dibx000_common.o
-obj-$(CONFIG_DVB_DIB7000M) += dib7000m.o dibx000_common.o
-obj-$(CONFIG_DVB_DIB7000P) += dib7000p.o dibx000_common.o
-obj-$(CONFIG_DVB_DIB8000) += dib8000.o dibx000_common.o
-obj-$(CONFIG_DVB_DIB9000) += dib9000.o dibx000_common.o
-obj-$(CONFIG_DVB_MT312) += mt312.o
-obj-$(CONFIG_DVB_VES1820) += ves1820.o
-obj-$(CONFIG_DVB_VES1X93) += ves1x93.o
-obj-$(CONFIG_DVB_TDA1004X) += tda1004x.o
-obj-$(CONFIG_DVB_SP887X) += sp887x.o
-obj-$(CONFIG_DVB_NXT6000) += nxt6000.o
-obj-$(CONFIG_DVB_MT352) += mt352.o
-obj-$(CONFIG_DVB_ZL10036) += zl10036.o
-obj-$(CONFIG_DVB_ZL10039) += zl10039.o
-obj-$(CONFIG_DVB_ZL10353) += zl10353.o
-obj-$(CONFIG_DVB_CX22702) += cx22702.o
-obj-$(CONFIG_DVB_DRXD) += drxd.o
-obj-$(CONFIG_DVB_TDA10021) += tda10021.o
-obj-$(CONFIG_DVB_TDA10023) += tda10023.o
-obj-$(CONFIG_DVB_STV0297) += stv0297.o
-obj-$(CONFIG_DVB_NXT200X) += nxt200x.o
-obj-$(CONFIG_DVB_OR51211) += or51211.o
-obj-$(CONFIG_DVB_OR51132) += or51132.o
-obj-$(CONFIG_DVB_BCM3510) += bcm3510.o
-obj-$(CONFIG_DVB_S5H1420) += s5h1420.o
-obj-$(CONFIG_DVB_LGDT330X) += lgdt330x.o
-obj-$(CONFIG_DVB_LGDT3305) += lgdt3305.o
-obj-$(CONFIG_DVB_LG2160) += lg2160.o
-obj-$(CONFIG_DVB_CX24123) += cx24123.o
-obj-$(CONFIG_DVB_LNBP21) += lnbp21.o
-obj-$(CONFIG_DVB_LNBP22) += lnbp22.o
-obj-$(CONFIG_DVB_ISL6405) += isl6405.o
-obj-$(CONFIG_DVB_ISL6421) += isl6421.o
-obj-$(CONFIG_DVB_TDA10086) += tda10086.o
-obj-$(CONFIG_DVB_TDA826X) += tda826x.o
-obj-$(CONFIG_DVB_TDA8261) += tda8261.o
-obj-$(CONFIG_DVB_TUNER_DIB0070) += dib0070.o
-obj-$(CONFIG_DVB_TUNER_DIB0090) += dib0090.o
-obj-$(CONFIG_DVB_TUA6100) += tua6100.o
-obj-$(CONFIG_DVB_S5H1409) += s5h1409.o
-obj-$(CONFIG_DVB_TUNER_ITD1000) += itd1000.o
-obj-$(CONFIG_DVB_AU8522) += au8522_common.o
-obj-$(CONFIG_DVB_AU8522_DTV) += au8522_dig.o
-obj-$(CONFIG_DVB_AU8522_V4L) += au8522_decoder.o
-obj-$(CONFIG_DVB_TDA10048) += tda10048.o
-obj-$(CONFIG_DVB_TUNER_CX24113) += cx24113.o
-obj-$(CONFIG_DVB_S5H1411) += s5h1411.o
-obj-$(CONFIG_DVB_LGS8GL5) += lgs8gl5.o
-obj-$(CONFIG_DVB_TDA665x) += tda665x.o
-obj-$(CONFIG_DVB_LGS8GXX) += lgs8gxx.o
-obj-$(CONFIG_DVB_ATBM8830) += atbm8830.o
-obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o
-obj-$(CONFIG_DVB_AF9013) += af9013.o
-obj-$(CONFIG_DVB_CX24116) += cx24116.o
-obj-$(CONFIG_DVB_SI21XX) += si21xx.o
-obj-$(CONFIG_DVB_STV0288) += stv0288.o
-obj-$(CONFIG_DVB_STB6000) += stb6000.o
-obj-$(CONFIG_DVB_S921) += s921.o
-obj-$(CONFIG_DVB_STV6110) += stv6110.o
-obj-$(CONFIG_DVB_STV0900) += stv0900.o
-obj-$(CONFIG_DVB_STV090x) += stv090x.o
-obj-$(CONFIG_DVB_STV6110x) += stv6110x.o
-obj-$(CONFIG_DVB_ISL6423) += isl6423.o
-obj-$(CONFIG_DVB_EC100) += ec100.o
-obj-$(CONFIG_DVB_HD29L2) += hd29l2.o
-obj-$(CONFIG_DVB_DS3000) += ds3000.o
-obj-$(CONFIG_DVB_MB86A16) += mb86a16.o
-obj-$(CONFIG_DVB_MB86A20S) += mb86a20s.o
-obj-$(CONFIG_DVB_IX2505V) += ix2505v.o
-obj-$(CONFIG_DVB_STV0367) += stv0367.o
-obj-$(CONFIG_DVB_CXD2820R) += cxd2820r.o
-obj-$(CONFIG_DVB_DRXK) += drxk.o
-obj-$(CONFIG_DVB_TDA18271C2DD) += tda18271c2dd.o
-obj-$(CONFIG_DVB_IT913X_FE) += it913x-fe.o
-obj-$(CONFIG_DVB_A8293) += a8293.o
-obj-$(CONFIG_DVB_TDA10071) += tda10071.o
-obj-$(CONFIG_DVB_RTL2830) += rtl2830.o
-obj-$(CONFIG_DVB_RTL2832) += rtl2832.o
-obj-$(CONFIG_DVB_M88RS2000) += m88rs2000.o
-obj-$(CONFIG_DVB_AF9033) += af9033.o
-
diff --git a/drivers/media/dvb/frontends/a8293.c b/drivers/media/dvb/frontends/a8293.c
deleted file mode 100644
index cff44a3..0000000
--- a/drivers/media/dvb/frontends/a8293.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * Allegro A8293 SEC driver
- *
- * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include "dvb_frontend.h"
-#include "a8293.h"
-
-struct a8293_priv {
-	struct i2c_adapter *i2c;
-	const struct a8293_config *cfg;
-	u8 reg[2];
-};
-
-static int a8293_i2c(struct a8293_priv *priv, u8 *val, int len, bool rd)
-{
-	int ret;
-	struct i2c_msg msg[1] = {
-		{
-			.addr = priv->cfg->i2c_addr,
-			.len = len,
-			.buf = val,
-		}
-	};
-
-	if (rd)
-		msg[0].flags = I2C_M_RD;
-	else
-		msg[0].flags = 0;
-
-	ret = i2c_transfer(priv->i2c, msg, 1);
-	if (ret == 1) {
-		ret = 0;
-	} else {
-		dev_warn(&priv->i2c->dev, "%s: i2c failed=%d rd=%d\n",
-				KBUILD_MODNAME, ret, rd);
-		ret = -EREMOTEIO;
-	}
-
-	return ret;
-}
-
-static int a8293_wr(struct a8293_priv *priv, u8 *val, int len)
-{
-	return a8293_i2c(priv, val, len, 0);
-}
-
-static int a8293_rd(struct a8293_priv *priv, u8 *val, int len)
-{
-	return a8293_i2c(priv, val, len, 1);
-}
-
-static int a8293_set_voltage(struct dvb_frontend *fe,
-	fe_sec_voltage_t fe_sec_voltage)
-{
-	struct a8293_priv *priv = fe->sec_priv;
-	int ret;
-
-	dev_dbg(&priv->i2c->dev, "%s: fe_sec_voltage=%d\n", __func__,
-			fe_sec_voltage);
-
-	switch (fe_sec_voltage) {
-	case SEC_VOLTAGE_OFF:
-		/* ENB=0 */
-		priv->reg[0] = 0x10;
-		break;
-	case SEC_VOLTAGE_13:
-		/* VSEL0=1, VSEL1=0, VSEL2=0, VSEL3=0, ENB=1*/
-		priv->reg[0] = 0x31;
-		break;
-	case SEC_VOLTAGE_18:
-		/* VSEL0=0, VSEL1=0, VSEL2=0, VSEL3=1, ENB=1*/
-		priv->reg[0] = 0x38;
-		break;
-	default:
-		ret = -EINVAL;
-		goto err;
-	};
-
-	ret = a8293_wr(priv, &priv->reg[0], 1);
-	if (ret)
-		goto err;
-
-	return ret;
-err:
-	dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static void a8293_release_sec(struct dvb_frontend *fe)
-{
-	a8293_set_voltage(fe, SEC_VOLTAGE_OFF);
-
-	kfree(fe->sec_priv);
-	fe->sec_priv = NULL;
-}
-
-struct dvb_frontend *a8293_attach(struct dvb_frontend *fe,
-	struct i2c_adapter *i2c, const struct a8293_config *cfg)
-{
-	int ret;
-	struct a8293_priv *priv = NULL;
-	u8 buf[2];
-
-	/* allocate memory for the internal priv */
-	priv = kzalloc(sizeof(struct a8293_priv), GFP_KERNEL);
-	if (priv == NULL) {
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	/* setup the priv */
-	priv->i2c = i2c;
-	priv->cfg = cfg;
-	fe->sec_priv = priv;
-
-	/* check if the SEC is there */
-	ret = a8293_rd(priv, buf, 2);
-	if (ret)
-		goto err;
-
-	/* ENB=0 */
-	priv->reg[0] = 0x10;
-	ret = a8293_wr(priv, &priv->reg[0], 1);
-	if (ret)
-		goto err;
-
-	/* TMODE=0, TGATE=1 */
-	priv->reg[1] = 0x82;
-	ret = a8293_wr(priv, &priv->reg[1], 1);
-	if (ret)
-		goto err;
-
-	fe->ops.release_sec = a8293_release_sec;
-
-	/* override frontend ops */
-	fe->ops.set_voltage = a8293_set_voltage;
-
-	dev_info(&priv->i2c->dev, "%s: Allegro A8293 SEC attached\n",
-			KBUILD_MODNAME);
-
-	return fe;
-err:
-	dev_dbg(&i2c->dev, "%s: failed=%d\n", __func__, ret);
-	kfree(priv);
-	return NULL;
-}
-EXPORT_SYMBOL(a8293_attach);
-
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_DESCRIPTION("Allegro A8293 SEC driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/a8293.h b/drivers/media/dvb/frontends/a8293.h
deleted file mode 100644
index ed29e55..0000000
--- a/drivers/media/dvb/frontends/a8293.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Allegro A8293 SEC driver
- *
- * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef A8293_H
-#define A8293_H
-
-struct a8293_config {
-	u8 i2c_addr;
-};
-
-#if defined(CONFIG_DVB_A8293) || \
-	(defined(CONFIG_DVB_A8293_MODULE) && defined(MODULE))
-extern struct dvb_frontend *a8293_attach(struct dvb_frontend *fe,
-	struct i2c_adapter *i2c, const struct a8293_config *cfg);
-#else
-static inline struct dvb_frontend *a8293_attach(struct dvb_frontend *fe,
-	struct i2c_adapter *i2c, const struct a8293_config *cfg)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif /* A8293_H */
diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c
deleted file mode 100644
index 5bc570d..0000000
--- a/drivers/media/dvb/frontends/af9013.c
+++ /dev/null
@@ -1,1524 +0,0 @@
-/*
- * Afatech AF9013 demodulator driver
- *
- * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
- * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
- *
- * Thanks to Afatech who kindly provided information.
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include "af9013_priv.h"
-
-int af9013_debug;
-module_param_named(debug, af9013_debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-struct af9013_state {
-	struct i2c_adapter *i2c;
-	struct dvb_frontend fe;
-	struct af9013_config config;
-
-	/* tuner/demod RF and IF AGC limits used for signal strength calc */
-	u8 signal_strength_en, rf_50, rf_80, if_50, if_80;
-	u16 signal_strength;
-	u32 ber;
-	u32 ucblocks;
-	u16 snr;
-	u32 bandwidth_hz;
-	fe_status_t fe_status;
-	unsigned long set_frontend_jiffies;
-	unsigned long read_status_jiffies;
-	bool first_tune;
-	bool i2c_gate_state;
-	unsigned int statistics_step:3;
-	struct delayed_work statistics_work;
-};
-
-/* write multiple registers */
-static int af9013_wr_regs_i2c(struct af9013_state *priv, u8 mbox, u16 reg,
-	const u8 *val, int len)
-{
-	int ret;
-	u8 buf[3+len];
-	struct i2c_msg msg[1] = {
-		{
-			.addr = priv->config.i2c_addr,
-			.flags = 0,
-			.len = sizeof(buf),
-			.buf = buf,
-		}
-	};
-
-	buf[0] = (reg >> 8) & 0xff;
-	buf[1] = (reg >> 0) & 0xff;
-	buf[2] = mbox;
-	memcpy(&buf[3], val, len);
-
-	ret = i2c_transfer(priv->i2c, msg, 1);
-	if (ret == 1) {
-		ret = 0;
-	} else {
-		warn("i2c wr failed=%d reg=%04x len=%d", ret, reg, len);
-		ret = -EREMOTEIO;
-	}
-	return ret;
-}
-
-/* read multiple registers */
-static int af9013_rd_regs_i2c(struct af9013_state *priv, u8 mbox, u16 reg,
-	u8 *val, int len)
-{
-	int ret;
-	u8 buf[3];
-	struct i2c_msg msg[2] = {
-		{
-			.addr = priv->config.i2c_addr,
-			.flags = 0,
-			.len = 3,
-			.buf = buf,
-		}, {
-			.addr = priv->config.i2c_addr,
-			.flags = I2C_M_RD,
-			.len = len,
-			.buf = val,
-		}
-	};
-
-	buf[0] = (reg >> 8) & 0xff;
-	buf[1] = (reg >> 0) & 0xff;
-	buf[2] = mbox;
-
-	ret = i2c_transfer(priv->i2c, msg, 2);
-	if (ret == 2) {
-		ret = 0;
-	} else {
-		warn("i2c rd failed=%d reg=%04x len=%d", ret, reg, len);
-		ret = -EREMOTEIO;
-	}
-	return ret;
-}
-
-/* write multiple registers */
-static int af9013_wr_regs(struct af9013_state *priv, u16 reg, const u8 *val,
-	int len)
-{
-	int ret, i;
-	u8 mbox = (0 << 7)|(0 << 6)|(1 << 1)|(1 << 0);
-
-	if ((priv->config.ts_mode == AF9013_TS_USB) &&
-		((reg & 0xff00) != 0xff00) && ((reg & 0xff00) != 0xae00)) {
-		mbox |= ((len - 1) << 2);
-		ret = af9013_wr_regs_i2c(priv, mbox, reg, val, len);
-	} else {
-		for (i = 0; i < len; i++) {
-			ret = af9013_wr_regs_i2c(priv, mbox, reg+i, val+i, 1);
-			if (ret)
-				goto err;
-		}
-	}
-
-err:
-	return 0;
-}
-
-/* read multiple registers */
-static int af9013_rd_regs(struct af9013_state *priv, u16 reg, u8 *val, int len)
-{
-	int ret, i;
-	u8 mbox = (0 << 7)|(0 << 6)|(1 << 1)|(0 << 0);
-
-	if ((priv->config.ts_mode == AF9013_TS_USB) &&
-		((reg & 0xff00) != 0xff00) && ((reg & 0xff00) != 0xae00)) {
-		mbox |= ((len - 1) << 2);
-		ret = af9013_rd_regs_i2c(priv, mbox, reg, val, len);
-	} else {
-		for (i = 0; i < len; i++) {
-			ret = af9013_rd_regs_i2c(priv, mbox, reg+i, val+i, 1);
-			if (ret)
-				goto err;
-		}
-	}
-
-err:
-	return 0;
-}
-
-/* write single register */
-static int af9013_wr_reg(struct af9013_state *priv, u16 reg, u8 val)
-{
-	return af9013_wr_regs(priv, reg, &val, 1);
-}
-
-/* read single register */
-static int af9013_rd_reg(struct af9013_state *priv, u16 reg, u8 *val)
-{
-	return af9013_rd_regs(priv, reg, val, 1);
-}
-
-static int af9013_write_ofsm_regs(struct af9013_state *state, u16 reg, u8 *val,
-	u8 len)
-{
-	u8 mbox = (1 << 7)|(1 << 6)|((len - 1) << 2)|(1 << 1)|(1 << 0);
-	return af9013_wr_regs_i2c(state, mbox, reg, val, len);
-}
-
-static int af9013_wr_reg_bits(struct af9013_state *state, u16 reg, int pos,
-	int len, u8 val)
-{
-	int ret;
-	u8 tmp, mask;
-
-	/* no need for read if whole reg is written */
-	if (len != 8) {
-		ret = af9013_rd_reg(state, reg, &tmp);
-		if (ret)
-			return ret;
-
-		mask = (0xff >> (8 - len)) << pos;
-		val <<= pos;
-		tmp &= ~mask;
-		val |= tmp;
-	}
-
-	return af9013_wr_reg(state, reg, val);
-}
-
-static int af9013_rd_reg_bits(struct af9013_state *state, u16 reg, int pos,
-	int len, u8 *val)
-{
-	int ret;
-	u8 tmp;
-
-	ret = af9013_rd_reg(state, reg, &tmp);
-	if (ret)
-		return ret;
-
-	*val = (tmp >> pos);
-	*val &= (0xff >> (8 - len));
-
-	return 0;
-}
-
-static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval)
-{
-	int ret;
-	u8 pos;
-	u16 addr;
-
-	dbg("%s: gpio=%d gpioval=%02x", __func__, gpio, gpioval);
-
-	/*
-	 * GPIO0 & GPIO1 0xd735
-	 * GPIO2 & GPIO3 0xd736
-	 */
-
-	switch (gpio) {
-	case 0:
-	case 1:
-		addr = 0xd735;
-		break;
-	case 2:
-	case 3:
-		addr = 0xd736;
-		break;
-
-	default:
-		err("invalid gpio:%d\n", gpio);
-		ret = -EINVAL;
-		goto err;
-	};
-
-	switch (gpio) {
-	case 0:
-	case 2:
-		pos = 0;
-		break;
-	case 1:
-	case 3:
-	default:
-		pos = 4;
-		break;
-	};
-
-	ret = af9013_wr_reg_bits(state, addr, pos, 4, gpioval);
-	if (ret)
-		goto err;
-
-	return ret;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static u32 af913_div(u32 a, u32 b, u32 x)
-{
-	u32 r = 0, c = 0, i;
-
-	dbg("%s: a=%d b=%d x=%d", __func__, a, b, x);
-
-	if (a > b) {
-		c = a / b;
-		a = a - c * b;
-	}
-
-	for (i = 0; i < x; i++) {
-		if (a >= b) {
-			r += 1;
-			a -= b;
-		}
-		a <<= 1;
-		r <<= 1;
-	}
-	r = (c << (u32)x) + r;
-
-	dbg("%s: a=%d b=%d x=%d r=%x", __func__, a, b, x, r);
-	return r;
-}
-
-static int af9013_power_ctrl(struct af9013_state *state, u8 onoff)
-{
-	int ret, i;
-	u8 tmp;
-
-	dbg("%s: onoff=%d", __func__, onoff);
-
-	/* enable reset */
-	ret = af9013_wr_reg_bits(state, 0xd417, 4, 1, 1);
-	if (ret)
-		goto err;
-
-	/* start reset mechanism */
-	ret = af9013_wr_reg(state, 0xaeff, 1);
-	if (ret)
-		goto err;
-
-	/* wait reset performs */
-	for (i = 0; i < 150; i++) {
-		ret = af9013_rd_reg_bits(state, 0xd417, 1, 1, &tmp);
-		if (ret)
-			goto err;
-
-		if (tmp)
-			break; /* reset done */
-
-		usleep_range(5000, 25000);
-	}
-
-	if (!tmp)
-		return -ETIMEDOUT;
-
-	if (onoff) {
-		/* clear reset */
-		ret = af9013_wr_reg_bits(state, 0xd417, 1, 1, 0);
-		if (ret)
-			goto err;
-
-		/* disable reset */
-		ret = af9013_wr_reg_bits(state, 0xd417, 4, 1, 0);
-
-		/* power on */
-		ret = af9013_wr_reg_bits(state, 0xd73a, 3, 1, 0);
-	} else {
-		/* power off */
-		ret = af9013_wr_reg_bits(state, 0xd73a, 3, 1, 1);
-	}
-
-	return ret;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int af9013_statistics_ber_unc_start(struct dvb_frontend *fe)
-{
-	struct af9013_state *state = fe->demodulator_priv;
-	int ret;
-
-	dbg("%s", __func__);
-
-	/* reset and start BER counter */
-	ret = af9013_wr_reg_bits(state, 0xd391, 4, 1, 1);
-	if (ret)
-		goto err;
-
-	return ret;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int af9013_statistics_ber_unc_result(struct dvb_frontend *fe)
-{
-	struct af9013_state *state = fe->demodulator_priv;
-	int ret;
-	u8 buf[5];
-
-	dbg("%s", __func__);
-
-	/* check if error bit count is ready */
-	ret = af9013_rd_reg_bits(state, 0xd391, 4, 1, &buf[0]);
-	if (ret)
-		goto err;
-
-	if (!buf[0]) {
-		dbg("%s: not ready", __func__);
-		return 0;
-	}
-
-	ret = af9013_rd_regs(state, 0xd387, buf, 5);
-	if (ret)
-		goto err;
-
-	state->ber = (buf[2] << 16) | (buf[1] << 8) | buf[0];
-	state->ucblocks += (buf[4] << 8) | buf[3];
-
-	return ret;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int af9013_statistics_snr_start(struct dvb_frontend *fe)
-{
-	struct af9013_state *state = fe->demodulator_priv;
-	int ret;
-
-	dbg("%s", __func__);
-
-	/* start SNR meas */
-	ret = af9013_wr_reg_bits(state, 0xd2e1, 3, 1, 1);
-	if (ret)
-		goto err;
-
-	return ret;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int af9013_statistics_snr_result(struct dvb_frontend *fe)
-{
-	struct af9013_state *state = fe->demodulator_priv;
-	int ret, i, len;
-	u8 buf[3], tmp;
-	u32 snr_val;
-	const struct af9013_snr *uninitialized_var(snr_lut);
-
-	dbg("%s", __func__);
-
-	/* check if SNR ready */
-	ret = af9013_rd_reg_bits(state, 0xd2e1, 3, 1, &tmp);
-	if (ret)
-		goto err;
-
-	if (!tmp) {
-		dbg("%s: not ready", __func__);
-		return 0;
-	}
-
-	/* read value */
-	ret = af9013_rd_regs(state, 0xd2e3, buf, 3);
-	if (ret)
-		goto err;
-
-	snr_val = (buf[2] << 16) | (buf[1] << 8) | buf[0];
-
-	/* read current modulation */
-	ret = af9013_rd_reg(state, 0xd3c1, &tmp);
-	if (ret)
-		goto err;
-
-	switch ((tmp >> 6) & 3) {
-	case 0:
-		len = ARRAY_SIZE(qpsk_snr_lut);
-		snr_lut = qpsk_snr_lut;
-		break;
-	case 1:
-		len = ARRAY_SIZE(qam16_snr_lut);
-		snr_lut = qam16_snr_lut;
-		break;
-	case 2:
-		len = ARRAY_SIZE(qam64_snr_lut);
-		snr_lut = qam64_snr_lut;
-		break;
-	default:
-		goto err;
-		break;
-	}
-
-	for (i = 0; i < len; i++) {
-		tmp = snr_lut[i].snr;
-
-		if (snr_val < snr_lut[i].val)
-			break;
-	}
-	state->snr = tmp * 10; /* dB/10 */
-
-	return ret;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int af9013_statistics_signal_strength(struct dvb_frontend *fe)
-{
-	struct af9013_state *state = fe->demodulator_priv;
-	int ret = 0;
-	u8 buf[2], rf_gain, if_gain;
-	int signal_strength;
-
-	dbg("%s", __func__);
-
-	if (!state->signal_strength_en)
-		return 0;
-
-	ret = af9013_rd_regs(state, 0xd07c, buf, 2);
-	if (ret)
-		goto err;
-
-	rf_gain = buf[0];
-	if_gain = buf[1];
-
-	signal_strength = (0xffff / \
-		(9 * (state->rf_50 + state->if_50) - \
-		11 * (state->rf_80 + state->if_80))) * \
-		(10 * (rf_gain + if_gain) - \
-		11 * (state->rf_80 + state->if_80));
-	if (signal_strength < 0)
-		signal_strength = 0;
-	else if (signal_strength > 0xffff)
-		signal_strength = 0xffff;
-
-	state->signal_strength = signal_strength;
-
-	return ret;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static void af9013_statistics_work(struct work_struct *work)
-{
-	struct af9013_state *state = container_of(work,
-		struct af9013_state, statistics_work.work);
-	unsigned int next_msec;
-
-	/* update only signal strength when demod is not locked */
-	if (!(state->fe_status & FE_HAS_LOCK)) {
-		state->statistics_step = 0;
-		state->ber = 0;
-		state->snr = 0;
-	}
-
-	switch (state->statistics_step) {
-	default:
-		state->statistics_step = 0;
-	case 0:
-		af9013_statistics_signal_strength(&state->fe);
-		state->statistics_step++;
-		next_msec = 300;
-		break;
-	case 1:
-		af9013_statistics_snr_start(&state->fe);
-		state->statistics_step++;
-		next_msec = 200;
-		break;
-	case 2:
-		af9013_statistics_ber_unc_start(&state->fe);
-		state->statistics_step++;
-		next_msec = 1000;
-		break;
-	case 3:
-		af9013_statistics_snr_result(&state->fe);
-		state->statistics_step++;
-		next_msec = 400;
-		break;
-	case 4:
-		af9013_statistics_ber_unc_result(&state->fe);
-		state->statistics_step++;
-		next_msec = 100;
-		break;
-	}
-
-	schedule_delayed_work(&state->statistics_work,
-		msecs_to_jiffies(next_msec));
-}
-
-static int af9013_get_tune_settings(struct dvb_frontend *fe,
-	struct dvb_frontend_tune_settings *fesettings)
-{
-	fesettings->min_delay_ms = 800;
-	fesettings->step_size = 0;
-	fesettings->max_drift = 0;
-
-	return 0;
-}
-
-static int af9013_set_frontend(struct dvb_frontend *fe)
-{
-	struct af9013_state *state = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	int ret, i, sampling_freq;
-	bool auto_mode, spec_inv;
-	u8 buf[6];
-	u32 if_frequency, freq_cw;
-
-	dbg("%s: frequency=%d bandwidth_hz=%d", __func__,
-		c->frequency, c->bandwidth_hz);
-
-	/* program tuner */
-	if (fe->ops.tuner_ops.set_params)
-		fe->ops.tuner_ops.set_params(fe);
-
-	/* program CFOE coefficients */
-	if (c->bandwidth_hz != state->bandwidth_hz) {
-		for (i = 0; i < ARRAY_SIZE(coeff_lut); i++) {
-			if (coeff_lut[i].clock == state->config.clock &&
-				coeff_lut[i].bandwidth_hz == c->bandwidth_hz) {
-				break;
-			}
-		}
-
-		ret = af9013_wr_regs(state, 0xae00, coeff_lut[i].val,
-			sizeof(coeff_lut[i].val));
-	}
-
-	/* program frequency control */
-	if (c->bandwidth_hz != state->bandwidth_hz || state->first_tune) {
-		/* get used IF frequency */
-		if (fe->ops.tuner_ops.get_if_frequency)
-			fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency);
-		else
-			if_frequency = state->config.if_frequency;
-
-		sampling_freq = if_frequency;
-
-		while (sampling_freq > (state->config.clock / 2))
-			sampling_freq -= state->config.clock;
-
-		if (sampling_freq < 0) {
-			sampling_freq *= -1;
-			spec_inv = state->config.spec_inv;
-		} else {
-			spec_inv = !state->config.spec_inv;
-		}
-
-		freq_cw = af913_div(sampling_freq, state->config.clock, 23);
-
-		if (spec_inv)
-			freq_cw = 0x800000 - freq_cw;
-
-		buf[0] = (freq_cw >>  0) & 0xff;
-		buf[1] = (freq_cw >>  8) & 0xff;
-		buf[2] = (freq_cw >> 16) & 0x7f;
-
-		freq_cw = 0x800000 - freq_cw;
-
-		buf[3] = (freq_cw >>  0) & 0xff;
-		buf[4] = (freq_cw >>  8) & 0xff;
-		buf[5] = (freq_cw >> 16) & 0x7f;
-
-		ret = af9013_wr_regs(state, 0xd140, buf, 3);
-		if (ret)
-			goto err;
-
-		ret = af9013_wr_regs(state, 0x9be7, buf, 6);
-		if (ret)
-			goto err;
-	}
-
-	/* clear TPS lock flag */
-	ret = af9013_wr_reg_bits(state, 0xd330, 3, 1, 1);
-	if (ret)
-		goto err;
-
-	/* clear MPEG2 lock flag */
-	ret = af9013_wr_reg_bits(state, 0xd507, 6, 1, 0);
-	if (ret)
-		goto err;
-
-	/* empty channel function */
-	ret = af9013_wr_reg_bits(state, 0x9bfe, 0, 1, 0);
-	if (ret)
-		goto err;
-
-	/* empty DVB-T channel function */
-	ret = af9013_wr_reg_bits(state, 0x9bc2, 0, 1, 0);
-	if (ret)
-		goto err;
-
-	/* transmission parameters */
-	auto_mode = false;
-	memset(buf, 0, 3);
-
-	switch (c->transmission_mode) {
-	case TRANSMISSION_MODE_AUTO:
-		auto_mode = 1;
-		break;
-	case TRANSMISSION_MODE_2K:
-		break;
-	case TRANSMISSION_MODE_8K:
-		buf[0] |= (1 << 0);
-		break;
-	default:
-		dbg("%s: invalid transmission_mode", __func__);
-		auto_mode = 1;
-	}
-
-	switch (c->guard_interval) {
-	case GUARD_INTERVAL_AUTO:
-		auto_mode = 1;
-		break;
-	case GUARD_INTERVAL_1_32:
-		break;
-	case GUARD_INTERVAL_1_16:
-		buf[0] |= (1 << 2);
-		break;
-	case GUARD_INTERVAL_1_8:
-		buf[0] |= (2 << 2);
-		break;
-	case GUARD_INTERVAL_1_4:
-		buf[0] |= (3 << 2);
-		break;
-	default:
-		dbg("%s: invalid guard_interval", __func__);
-		auto_mode = 1;
-	}
-
-	switch (c->hierarchy) {
-	case HIERARCHY_AUTO:
-		auto_mode = 1;
-		break;
-	case HIERARCHY_NONE:
-		break;
-	case HIERARCHY_1:
-		buf[0] |= (1 << 4);
-		break;
-	case HIERARCHY_2:
-		buf[0] |= (2 << 4);
-		break;
-	case HIERARCHY_4:
-		buf[0] |= (3 << 4);
-		break;
-	default:
-		dbg("%s: invalid hierarchy", __func__);
-		auto_mode = 1;
-	};
-
-	switch (c->modulation) {
-	case QAM_AUTO:
-		auto_mode = 1;
-		break;
-	case QPSK:
-		break;
-	case QAM_16:
-		buf[1] |= (1 << 6);
-		break;
-	case QAM_64:
-		buf[1] |= (2 << 6);
-		break;
-	default:
-		dbg("%s: invalid modulation", __func__);
-		auto_mode = 1;
-	}
-
-	/* Use HP. How and which case we can switch to LP? */
-	buf[1] |= (1 << 4);
-
-	switch (c->code_rate_HP) {
-	case FEC_AUTO:
-		auto_mode = 1;
-		break;
-	case FEC_1_2:
-		break;
-	case FEC_2_3:
-		buf[2] |= (1 << 0);
-		break;
-	case FEC_3_4:
-		buf[2] |= (2 << 0);
-		break;
-	case FEC_5_6:
-		buf[2] |= (3 << 0);
-		break;
-	case FEC_7_8:
-		buf[2] |= (4 << 0);
-		break;
-	default:
-		dbg("%s: invalid code_rate_HP", __func__);
-		auto_mode = 1;
-	}
-
-	switch (c->code_rate_LP) {
-	case FEC_AUTO:
-		auto_mode = 1;
-		break;
-	case FEC_1_2:
-		break;
-	case FEC_2_3:
-		buf[2] |= (1 << 3);
-		break;
-	case FEC_3_4:
-		buf[2] |= (2 << 3);
-		break;
-	case FEC_5_6:
-		buf[2] |= (3 << 3);
-		break;
-	case FEC_7_8:
-		buf[2] |= (4 << 3);
-		break;
-	case FEC_NONE:
-		break;
-	default:
-		dbg("%s: invalid code_rate_LP", __func__);
-		auto_mode = 1;
-	}
-
-	switch (c->bandwidth_hz) {
-	case 6000000:
-		break;
-	case 7000000:
-		buf[1] |= (1 << 2);
-		break;
-	case 8000000:
-		buf[1] |= (2 << 2);
-		break;
-	default:
-		dbg("%s: invalid bandwidth_hz", __func__);
-		ret = -EINVAL;
-		goto err;
-	}
-
-	ret = af9013_wr_regs(state, 0xd3c0, buf, 3);
-	if (ret)
-		goto err;
-
-	if (auto_mode) {
-		/* clear easy mode flag */
-		ret = af9013_wr_reg(state, 0xaefd, 0);
-		if (ret)
-			goto err;
-
-		dbg("%s: auto params", __func__);
-	} else {
-		/* set easy mode flag */
-		ret = af9013_wr_reg(state, 0xaefd, 1);
-		if (ret)
-			goto err;
-
-		ret = af9013_wr_reg(state, 0xaefe, 0);
-		if (ret)
-			goto err;
-
-		dbg("%s: manual params", __func__);
-	}
-
-	/* tune */
-	ret = af9013_wr_reg(state, 0xffff, 0);
-	if (ret)
-		goto err;
-
-	state->bandwidth_hz = c->bandwidth_hz;
-	state->set_frontend_jiffies = jiffies;
-	state->first_tune = false;
-
-	return ret;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int af9013_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct af9013_state *state = fe->demodulator_priv;
-	int ret;
-	u8 buf[3];
-
-	dbg("%s", __func__);
-
-	ret = af9013_rd_regs(state, 0xd3c0, buf, 3);
-	if (ret)
-		goto err;
-
-	switch ((buf[1] >> 6) & 3) {
-	case 0:
-		c->modulation = QPSK;
-		break;
-	case 1:
-		c->modulation = QAM_16;
-		break;
-	case 2:
-		c->modulation = QAM_64;
-		break;
-	}
-
-	switch ((buf[0] >> 0) & 3) {
-	case 0:
-		c->transmission_mode = TRANSMISSION_MODE_2K;
-		break;
-	case 1:
-		c->transmission_mode = TRANSMISSION_MODE_8K;
-	}
-
-	switch ((buf[0] >> 2) & 3) {
-	case 0:
-		c->guard_interval = GUARD_INTERVAL_1_32;
-		break;
-	case 1:
-		c->guard_interval = GUARD_INTERVAL_1_16;
-		break;
-	case 2:
-		c->guard_interval = GUARD_INTERVAL_1_8;
-		break;
-	case 3:
-		c->guard_interval = GUARD_INTERVAL_1_4;
-		break;
-	}
-
-	switch ((buf[0] >> 4) & 7) {
-	case 0:
-		c->hierarchy = HIERARCHY_NONE;
-		break;
-	case 1:
-		c->hierarchy = HIERARCHY_1;
-		break;
-	case 2:
-		c->hierarchy = HIERARCHY_2;
-		break;
-	case 3:
-		c->hierarchy = HIERARCHY_4;
-		break;
-	}
-
-	switch ((buf[2] >> 0) & 7) {
-	case 0:
-		c->code_rate_HP = FEC_1_2;
-		break;
-	case 1:
-		c->code_rate_HP = FEC_2_3;
-		break;
-	case 2:
-		c->code_rate_HP = FEC_3_4;
-		break;
-	case 3:
-		c->code_rate_HP = FEC_5_6;
-		break;
-	case 4:
-		c->code_rate_HP = FEC_7_8;
-		break;
-	}
-
-	switch ((buf[2] >> 3) & 7) {
-	case 0:
-		c->code_rate_LP = FEC_1_2;
-		break;
-	case 1:
-		c->code_rate_LP = FEC_2_3;
-		break;
-	case 2:
-		c->code_rate_LP = FEC_3_4;
-		break;
-	case 3:
-		c->code_rate_LP = FEC_5_6;
-		break;
-	case 4:
-		c->code_rate_LP = FEC_7_8;
-		break;
-	}
-
-	switch ((buf[1] >> 2) & 3) {
-	case 0:
-		c->bandwidth_hz = 6000000;
-		break;
-	case 1:
-		c->bandwidth_hz = 7000000;
-		break;
-	case 2:
-		c->bandwidth_hz = 8000000;
-		break;
-	}
-
-	return ret;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct af9013_state *state = fe->demodulator_priv;
-	int ret;
-	u8 tmp;
-
-	/*
-	 * Return status from the cache if it is younger than 2000ms with the
-	 * exception of last tune is done during 4000ms.
-	 */
-	if (time_is_after_jiffies(
-		state->read_status_jiffies + msecs_to_jiffies(2000)) &&
-		time_is_before_jiffies(
-		state->set_frontend_jiffies + msecs_to_jiffies(4000))
-	) {
-			*status = state->fe_status;
-			return 0;
-	} else {
-		*status = 0;
-	}
-
-	/* MPEG2 lock */
-	ret = af9013_rd_reg_bits(state, 0xd507, 6, 1, &tmp);
-	if (ret)
-		goto err;
-
-	if (tmp)
-		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI |
-			FE_HAS_SYNC | FE_HAS_LOCK;
-
-	if (!*status) {
-		/* TPS lock */
-		ret = af9013_rd_reg_bits(state, 0xd330, 3, 1, &tmp);
-		if (ret)
-			goto err;
-
-		if (tmp)
-			*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
-				FE_HAS_VITERBI;
-	}
-
-	state->fe_status = *status;
-	state->read_status_jiffies = jiffies;
-
-	return ret;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int af9013_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct af9013_state *state = fe->demodulator_priv;
-	*snr = state->snr;
-	return 0;
-}
-
-static int af9013_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	struct af9013_state *state = fe->demodulator_priv;
-	*strength = state->signal_strength;
-	return 0;
-}
-
-static int af9013_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct af9013_state *state = fe->demodulator_priv;
-	*ber = state->ber;
-	return 0;
-}
-
-static int af9013_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	struct af9013_state *state = fe->demodulator_priv;
-	*ucblocks = state->ucblocks;
-	return 0;
-}
-
-static int af9013_init(struct dvb_frontend *fe)
-{
-	struct af9013_state *state = fe->demodulator_priv;
-	int ret, i, len;
-	u8 buf[3], tmp;
-	u32 adc_cw;
-	const struct af9013_reg_bit *init;
-
-	dbg("%s", __func__);
-
-	/* power on */
-	ret = af9013_power_ctrl(state, 1);
-	if (ret)
-		goto err;
-
-	/* enable ADC */
-	ret = af9013_wr_reg(state, 0xd73a, 0xa4);
-	if (ret)
-		goto err;
-
-	/* write API version to firmware */
-	ret = af9013_wr_regs(state, 0x9bf2, state->config.api_version, 4);
-	if (ret)
-		goto err;
-
-	/* program ADC control */
-	switch (state->config.clock) {
-	case 28800000: /* 28.800 MHz */
-		tmp = 0;
-		break;
-	case 20480000: /* 20.480 MHz */
-		tmp = 1;
-		break;
-	case 28000000: /* 28.000 MHz */
-		tmp = 2;
-		break;
-	case 25000000: /* 25.000 MHz */
-		tmp = 3;
-		break;
-	default:
-		err("invalid clock");
-		return -EINVAL;
-	}
-
-	adc_cw = af913_div(state->config.clock, 1000000ul, 19);
-	buf[0] = (adc_cw >>  0) & 0xff;
-	buf[1] = (adc_cw >>  8) & 0xff;
-	buf[2] = (adc_cw >> 16) & 0xff;
-
-	ret = af9013_wr_regs(state, 0xd180, buf, 3);
-	if (ret)
-		goto err;
-
-	ret = af9013_wr_reg_bits(state, 0x9bd2, 0, 4, tmp);
-	if (ret)
-		goto err;
-
-	/* set I2C master clock */
-	ret = af9013_wr_reg(state, 0xd416, 0x14);
-	if (ret)
-		goto err;
-
-	/* set 16 embx */
-	ret = af9013_wr_reg_bits(state, 0xd700, 1, 1, 1);
-	if (ret)
-		goto err;
-
-	/* set no trigger */
-	ret = af9013_wr_reg_bits(state, 0xd700, 2, 1, 0);
-	if (ret)
-		goto err;
-
-	/* set read-update bit for constellation */
-	ret = af9013_wr_reg_bits(state, 0xd371, 1, 1, 1);
-	if (ret)
-		goto err;
-
-	/* settings for mp2if */
-	if (state->config.ts_mode == AF9013_TS_USB) {
-		/* AF9015 split PSB to 1.5k + 0.5k */
-		ret = af9013_wr_reg_bits(state, 0xd50b, 2, 1, 1);
-		if (ret)
-			goto err;
-	} else {
-		/* AF9013 change the output bit to data7 */
-		ret = af9013_wr_reg_bits(state, 0xd500, 3, 1, 1);
-		if (ret)
-			goto err;
-
-		/* AF9013 set mpeg to full speed */
-		ret = af9013_wr_reg_bits(state, 0xd502, 4, 1, 1);
-		if (ret)
-			goto err;
-	}
-
-	ret = af9013_wr_reg_bits(state, 0xd520, 4, 1, 1);
-	if (ret)
-		goto err;
-
-	/* load OFSM settings */
-	dbg("%s: load ofsm settings", __func__);
-	len = ARRAY_SIZE(ofsm_init);
-	init = ofsm_init;
-	for (i = 0; i < len; i++) {
-		ret = af9013_wr_reg_bits(state, init[i].addr, init[i].pos,
-			init[i].len, init[i].val);
-		if (ret)
-			goto err;
-	}
-
-	/* load tuner specific settings */
-	dbg("%s: load tuner specific settings", __func__);
-	switch (state->config.tuner) {
-	case AF9013_TUNER_MXL5003D:
-		len = ARRAY_SIZE(tuner_init_mxl5003d);
-		init = tuner_init_mxl5003d;
-		break;
-	case AF9013_TUNER_MXL5005D:
-	case AF9013_TUNER_MXL5005R:
-	case AF9013_TUNER_MXL5007T:
-		len = ARRAY_SIZE(tuner_init_mxl5005);
-		init = tuner_init_mxl5005;
-		break;
-	case AF9013_TUNER_ENV77H11D5:
-		len = ARRAY_SIZE(tuner_init_env77h11d5);
-		init = tuner_init_env77h11d5;
-		break;
-	case AF9013_TUNER_MT2060:
-		len = ARRAY_SIZE(tuner_init_mt2060);
-		init = tuner_init_mt2060;
-		break;
-	case AF9013_TUNER_MC44S803:
-		len = ARRAY_SIZE(tuner_init_mc44s803);
-		init = tuner_init_mc44s803;
-		break;
-	case AF9013_TUNER_QT1010:
-	case AF9013_TUNER_QT1010A:
-		len = ARRAY_SIZE(tuner_init_qt1010);
-		init = tuner_init_qt1010;
-		break;
-	case AF9013_TUNER_MT2060_2:
-		len = ARRAY_SIZE(tuner_init_mt2060_2);
-		init = tuner_init_mt2060_2;
-		break;
-	case AF9013_TUNER_TDA18271:
-	case AF9013_TUNER_TDA18218:
-		len = ARRAY_SIZE(tuner_init_tda18271);
-		init = tuner_init_tda18271;
-		break;
-	case AF9013_TUNER_UNKNOWN:
-	default:
-		len = ARRAY_SIZE(tuner_init_unknown);
-		init = tuner_init_unknown;
-		break;
-	}
-
-	for (i = 0; i < len; i++) {
-		ret = af9013_wr_reg_bits(state, init[i].addr, init[i].pos,
-			init[i].len, init[i].val);
-		if (ret)
-			goto err;
-	}
-
-	/* TS mode */
-	ret = af9013_wr_reg_bits(state, 0xd500, 1, 2, state->config.ts_mode);
-	if (ret)
-		goto err;
-
-	/* enable lock led */
-	ret = af9013_wr_reg_bits(state, 0xd730, 0, 1, 1);
-	if (ret)
-		goto err;
-
-	/* check if we support signal strength */
-	if (!state->signal_strength_en) {
-		ret = af9013_rd_reg_bits(state, 0x9bee, 0, 1,
-			&state->signal_strength_en);
-		if (ret)
-			goto err;
-	}
-
-	/* read values needed for signal strength calculation */
-	if (state->signal_strength_en && !state->rf_50) {
-		ret = af9013_rd_reg(state, 0x9bbd, &state->rf_50);
-		if (ret)
-			goto err;
-
-		ret = af9013_rd_reg(state, 0x9bd0, &state->rf_80);
-		if (ret)
-			goto err;
-
-		ret = af9013_rd_reg(state, 0x9be2, &state->if_50);
-		if (ret)
-			goto err;
-
-		ret = af9013_rd_reg(state, 0x9be4, &state->if_80);
-		if (ret)
-			goto err;
-	}
-
-	/* SNR */
-	ret = af9013_wr_reg(state, 0xd2e2, 1);
-	if (ret)
-		goto err;
-
-	/* BER / UCB */
-	buf[0] = (10000 >> 0) & 0xff;
-	buf[1] = (10000 >> 8) & 0xff;
-	ret = af9013_wr_regs(state, 0xd385, buf, 2);
-	if (ret)
-		goto err;
-
-	/* enable FEC monitor */
-	ret = af9013_wr_reg_bits(state, 0xd392, 1, 1, 1);
-	if (ret)
-		goto err;
-
-	state->first_tune = true;
-	schedule_delayed_work(&state->statistics_work, msecs_to_jiffies(400));
-
-	return ret;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int af9013_sleep(struct dvb_frontend *fe)
-{
-	struct af9013_state *state = fe->demodulator_priv;
-	int ret;
-
-	dbg("%s", __func__);
-
-	/* stop statistics polling */
-	cancel_delayed_work_sync(&state->statistics_work);
-
-	/* disable lock led */
-	ret = af9013_wr_reg_bits(state, 0xd730, 0, 1, 0);
-	if (ret)
-		goto err;
-
-	/* power off */
-	ret = af9013_power_ctrl(state, 0);
-	if (ret)
-		goto err;
-
-	return ret;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int af9013_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	int ret;
-	struct af9013_state *state = fe->demodulator_priv;
-
-	dbg("%s: enable=%d", __func__, enable);
-
-	/* gate already open or close */
-	if (state->i2c_gate_state == enable)
-		return 0;
-
-	if (state->config.ts_mode == AF9013_TS_USB)
-		ret = af9013_wr_reg_bits(state, 0xd417, 3, 1, enable);
-	else
-		ret = af9013_wr_reg_bits(state, 0xd607, 2, 1, enable);
-	if (ret)
-		goto err;
-
-	state->i2c_gate_state = enable;
-
-	return ret;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static void af9013_release(struct dvb_frontend *fe)
-{
-	struct af9013_state *state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops af9013_ops;
-
-static int af9013_download_firmware(struct af9013_state *state)
-{
-	int i, len, remaining, ret;
-	const struct firmware *fw;
-	u16 checksum = 0;
-	u8 val;
-	u8 fw_params[4];
-	u8 *fw_file = AF9013_DEFAULT_FIRMWARE;
-
-	msleep(100);
-	/* check whether firmware is already running */
-	ret = af9013_rd_reg(state, 0x98be, &val);
-	if (ret)
-		goto err;
-	else
-		dbg("%s: firmware status=%02x", __func__, val);
-
-	if (val == 0x0c) /* fw is running, no need for download */
-		goto exit;
-
-	info("found a '%s' in cold state, will try to load a firmware",
-		af9013_ops.info.name);
-
-	/* request the firmware, this will block and timeout */
-	ret = request_firmware(&fw, fw_file, state->i2c->dev.parent);
-	if (ret) {
-		err("did not find the firmware file. (%s) "
-			"Please see linux/Documentation/dvb/ for more details" \
-			" on firmware-problems. (%d)",
-			fw_file, ret);
-		goto err;
-	}
-
-	info("downloading firmware from file '%s'", fw_file);
-
-	/* calc checksum */
-	for (i = 0; i < fw->size; i++)
-		checksum += fw->data[i];
-
-	fw_params[0] = checksum >> 8;
-	fw_params[1] = checksum & 0xff;
-	fw_params[2] = fw->size >> 8;
-	fw_params[3] = fw->size & 0xff;
-
-	/* write fw checksum & size */
-	ret = af9013_write_ofsm_regs(state, 0x50fc,
-		fw_params, sizeof(fw_params));
-	if (ret)
-		goto err_release;
-
-	#define FW_ADDR 0x5100 /* firmware start address */
-	#define LEN_MAX 16 /* max packet size */
-	for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) {
-		len = remaining;
-		if (len > LEN_MAX)
-			len = LEN_MAX;
-
-		ret = af9013_write_ofsm_regs(state,
-			FW_ADDR + fw->size - remaining,
-			(u8 *) &fw->data[fw->size - remaining], len);
-		if (ret) {
-			err("firmware download failed:%d", ret);
-			goto err_release;
-		}
-	}
-
-	/* request boot firmware */
-	ret = af9013_wr_reg(state, 0xe205, 1);
-	if (ret)
-		goto err_release;
-
-	for (i = 0; i < 15; i++) {
-		msleep(100);
-
-		/* check firmware status */
-		ret = af9013_rd_reg(state, 0x98be, &val);
-		if (ret)
-			goto err_release;
-
-		dbg("%s: firmware status=%02x", __func__, val);
-
-		if (val == 0x0c || val == 0x04) /* success or fail */
-			break;
-	}
-
-	if (val == 0x04) {
-		err("firmware did not run");
-		ret = -ENODEV;
-	} else if (val != 0x0c) {
-		err("firmware boot timeout");
-		ret = -ENODEV;
-	}
-
-err_release:
-	release_firmware(fw);
-err:
-exit:
-	if (!ret)
-		info("found a '%s' in warm state.", af9013_ops.info.name);
-	return ret;
-}
-
-struct dvb_frontend *af9013_attach(const struct af9013_config *config,
-	struct i2c_adapter *i2c)
-{
-	int ret;
-	struct af9013_state *state = NULL;
-	u8 buf[4], i;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct af9013_state), GFP_KERNEL);
-	if (state == NULL)
-		goto err;
-
-	/* setup the state */
-	state->i2c = i2c;
-	memcpy(&state->config, config, sizeof(struct af9013_config));
-
-	/* download firmware */
-	if (state->config.ts_mode != AF9013_TS_USB) {
-		ret = af9013_download_firmware(state);
-		if (ret)
-			goto err;
-	}
-
-	/* firmware version */
-	ret = af9013_rd_regs(state, 0x5103, buf, 4);
-	if (ret)
-		goto err;
-
-	info("firmware version %d.%d.%d.%d", buf[0], buf[1], buf[2], buf[3]);
-
-	/* set GPIOs */
-	for (i = 0; i < sizeof(state->config.gpio); i++) {
-		ret = af9013_set_gpio(state, i, state->config.gpio[i]);
-		if (ret)
-			goto err;
-	}
-
-	/* create dvb_frontend */
-	memcpy(&state->fe.ops, &af9013_ops,
-		sizeof(struct dvb_frontend_ops));
-	state->fe.demodulator_priv = state;
-
-	INIT_DELAYED_WORK(&state->statistics_work, af9013_statistics_work);
-
-	return &state->fe;
-err:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(af9013_attach);
-
-static struct dvb_frontend_ops af9013_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name = "Afatech AF9013",
-		.frequency_min = 174000000,
-		.frequency_max = 862000000,
-		.frequency_stepsize = 250000,
-		.frequency_tolerance = 0,
-		.caps =	FE_CAN_FEC_1_2 |
-			FE_CAN_FEC_2_3 |
-			FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 |
-			FE_CAN_FEC_7_8 |
-			FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK |
-			FE_CAN_QAM_16 |
-			FE_CAN_QAM_64 |
-			FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO |
-			FE_CAN_GUARD_INTERVAL_AUTO |
-			FE_CAN_HIERARCHY_AUTO |
-			FE_CAN_RECOVER |
-			FE_CAN_MUTE_TS
-	},
-
-	.release = af9013_release,
-
-	.init = af9013_init,
-	.sleep = af9013_sleep,
-
-	.get_tune_settings = af9013_get_tune_settings,
-	.set_frontend = af9013_set_frontend,
-	.get_frontend = af9013_get_frontend,
-
-	.read_status = af9013_read_status,
-	.read_snr = af9013_read_snr,
-	.read_signal_strength = af9013_read_signal_strength,
-	.read_ber = af9013_read_ber,
-	.read_ucblocks = af9013_read_ucblocks,
-
-	.i2c_gate_ctrl = af9013_i2c_gate_ctrl,
-};
-
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_DESCRIPTION("Afatech AF9013 DVB-T demodulator driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/af9013.h b/drivers/media/dvb/frontends/af9013.h
deleted file mode 100644
index b973fc5..0000000
--- a/drivers/media/dvb/frontends/af9013.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Afatech AF9013 demodulator driver
- *
- * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
- * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
- *
- * Thanks to Afatech who kindly provided information.
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef AF9013_H
-#define AF9013_H
-
-#include <linux/dvb/frontend.h>
-
-/* AF9013/5 GPIOs (mostly guessed)
-   demod#1-gpio#0 - set demod#2 i2c-addr for dual devices
-   demod#1-gpio#1 - xtal setting (?)
-   demod#1-gpio#3 - tuner#1
-   demod#2-gpio#0 - tuner#2
-   demod#2-gpio#1 - xtal setting (?)
-*/
-
-struct af9013_config {
-	/*
-	 * I2C address
-	 */
-	u8 i2c_addr;
-
-	/*
-	 * clock
-	 * 20480000, 25000000, 28000000, 28800000
-	 */
-	u32 clock;
-
-	/*
-	 * tuner
-	 */
-#define AF9013_TUNER_MXL5003D      3 /* MaxLinear */
-#define AF9013_TUNER_MXL5005D     13 /* MaxLinear */
-#define AF9013_TUNER_MXL5005R     30 /* MaxLinear */
-#define AF9013_TUNER_ENV77H11D5  129 /* Panasonic */
-#define AF9013_TUNER_MT2060      130 /* Microtune */
-#define AF9013_TUNER_MC44S803    133 /* Freescale */
-#define AF9013_TUNER_QT1010      134 /* Quantek */
-#define AF9013_TUNER_UNKNOWN     140 /* for can tuners ? */
-#define AF9013_TUNER_MT2060_2    147 /* Microtune */
-#define AF9013_TUNER_TDA18271    156 /* NXP */
-#define AF9013_TUNER_QT1010A     162 /* Quantek */
-#define AF9013_TUNER_MXL5007T    177 /* MaxLinear */
-#define AF9013_TUNER_TDA18218    179 /* NXP */
-	u8 tuner;
-
-	/*
-	 * IF frequency
-	 */
-	u32 if_frequency;
-
-	/*
-	 * TS settings
-	 */
-#define AF9013_TS_USB       0
-#define AF9013_TS_PARALLEL  1
-#define AF9013_TS_SERIAL    2
-	u8 ts_mode:2;
-
-	/*
-	 * input spectrum inversion
-	 */
-	bool spec_inv;
-
-	/*
-	 * firmware API version
-	 */
-	u8 api_version[4];
-
-	/*
-	 * GPIOs
-	 */
-#define AF9013_GPIO_ON (1 << 0)
-#define AF9013_GPIO_EN (1 << 1)
-#define AF9013_GPIO_O  (1 << 2)
-#define AF9013_GPIO_I  (1 << 3)
-#define AF9013_GPIO_LO (AF9013_GPIO_ON|AF9013_GPIO_EN)
-#define AF9013_GPIO_HI (AF9013_GPIO_ON|AF9013_GPIO_EN|AF9013_GPIO_O)
-#define AF9013_GPIO_TUNER_ON  (AF9013_GPIO_ON|AF9013_GPIO_EN)
-#define AF9013_GPIO_TUNER_OFF (AF9013_GPIO_ON|AF9013_GPIO_EN|AF9013_GPIO_O)
-	u8 gpio[4];
-};
-
-#if defined(CONFIG_DVB_AF9013) || \
-	(defined(CONFIG_DVB_AF9013_MODULE) && defined(MODULE))
-extern struct dvb_frontend *af9013_attach(const struct af9013_config *config,
-	struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *af9013_attach(
-const struct af9013_config *config, struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_AF9013 */
-
-#endif /* AF9013_H */
diff --git a/drivers/media/dvb/frontends/af9013_priv.h b/drivers/media/dvb/frontends/af9013_priv.h
deleted file mode 100644
index fa848af..0000000
--- a/drivers/media/dvb/frontends/af9013_priv.h
+++ /dev/null
@@ -1,922 +0,0 @@
-/*
- * Afatech AF9013 demodulator driver
- *
- * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
- * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
- *
- * Thanks to Afatech who kindly provided information.
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef AF9013_PRIV_H
-#define AF9013_PRIV_H
-
-#include "dvb_frontend.h"
-#include "af9013.h"
-#include <linux/firmware.h>
-
-#define LOG_PREFIX "af9013"
-
-#undef dbg
-#define dbg(f, arg...) \
-	if (af9013_debug) \
-		printk(KERN_INFO   LOG_PREFIX": " f "\n" , ## arg)
-#undef err
-#define err(f, arg...)  printk(KERN_ERR     LOG_PREFIX": " f "\n" , ## arg)
-#undef info
-#define info(f, arg...) printk(KERN_INFO    LOG_PREFIX": " f "\n" , ## arg)
-#undef warn
-#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg)
-
-#define AF9013_DEFAULT_FIRMWARE     "dvb-fe-af9013.fw"
-
-struct af9013_reg_bit {
-	u16 addr;
-	u8  pos:4;
-	u8  len:4;
-	u8  val;
-};
-
-struct af9013_snr {
-	u32 val;
-	u8 snr;
-};
-
-struct af9013_coeff {
-	u32 clock;
-	u32 bandwidth_hz;
-	u8 val[24];
-};
-
-/* pre-calculated coeff lookup table */
-static const struct af9013_coeff coeff_lut[] = {
-	/* 28.800 MHz */
-	{ 28800000, 8000000, { 0x02, 0x8a, 0x28, 0xa3, 0x05, 0x14,
-		0x51, 0x11, 0x00, 0xa2, 0x8f, 0x3d, 0x00, 0xa2, 0x8a,
-		0x29, 0x00, 0xa2, 0x85, 0x14, 0x01, 0x45, 0x14, 0x14 } },
-	{ 28800000, 7000000, { 0x02, 0x38, 0xe3, 0x8e, 0x04, 0x71,
-		0xc7, 0x07, 0x00, 0x8e, 0x3d, 0x55, 0x00, 0x8e, 0x38,
-		0xe4, 0x00, 0x8e, 0x34, 0x72, 0x01, 0x1c, 0x71, 0x32 } },
-	{ 28800000, 6000000, { 0x01, 0xe7, 0x9e, 0x7a, 0x03, 0xcf,
-		0x3c, 0x3d, 0x00, 0x79, 0xeb, 0x6e, 0x00, 0x79, 0xe7,
-		0x9e, 0x00, 0x79, 0xe3, 0xcf, 0x00, 0xf3, 0xcf, 0x0f } },
-	/* 20.480 MHz */
-	{ 20480000, 8000000, { 0x03, 0x92, 0x49, 0x26, 0x07, 0x24,
-		0x92, 0x13, 0x00, 0xe4, 0x99, 0x6e, 0x00, 0xe4, 0x92,
-		0x49, 0x00, 0xe4, 0x8b, 0x25, 0x01, 0xc9, 0x24, 0x25 } },
-	{ 20480000, 7000000, { 0x03, 0x20, 0x00, 0x01, 0x06, 0x40,
-		0x00, 0x00, 0x00, 0xc8, 0x06, 0x40, 0x00, 0xc8, 0x00,
-		0x00, 0x00, 0xc7, 0xf9, 0xc0, 0x01, 0x90, 0x00, 0x00 } },
-	{ 20480000, 6000000, { 0x02, 0xad, 0xb6, 0xdc, 0x05, 0x5b,
-		0x6d, 0x2e, 0x00, 0xab, 0x73, 0x13, 0x00, 0xab, 0x6d,
-		0xb7, 0x00, 0xab, 0x68, 0x5c, 0x01, 0x56, 0xdb, 0x1c } },
-	/* 28.000 MHz */
-	{ 28000000, 8000000, { 0x02, 0x9c, 0xbc, 0x15, 0x05, 0x39,
-		0x78, 0x0a, 0x00, 0xa7, 0x34, 0x3f, 0x00, 0xa7, 0x2f,
-		0x05, 0x00, 0xa7, 0x29, 0xcc, 0x01, 0x4e, 0x5e, 0x03 } },
-	{ 28000000, 7000000, { 0x02, 0x49, 0x24, 0x92, 0x04, 0x92,
-		0x49, 0x09, 0x00, 0x92, 0x4d, 0xb7, 0x00, 0x92, 0x49,
-		0x25, 0x00, 0x92, 0x44, 0x92, 0x01, 0x24, 0x92, 0x12 } },
-	{ 28000000, 6000000, { 0x01, 0xf5, 0x8d, 0x10, 0x03, 0xeb,
-		0x1a, 0x08, 0x00, 0x7d, 0x67, 0x2f, 0x00, 0x7d, 0x63,
-		0x44, 0x00, 0x7d, 0x5f, 0x59, 0x00, 0xfa, 0xc6, 0x22 } },
-	/* 25.000 MHz */
-	{ 25000000, 8000000, { 0x02, 0xec, 0xfb, 0x9d, 0x05, 0xd9,
-		0xf7, 0x0e, 0x00, 0xbb, 0x44, 0xc1, 0x00, 0xbb, 0x3e,
-		0xe7, 0x00, 0xbb, 0x39, 0x0d, 0x01, 0x76, 0x7d, 0x34 } },
-	{ 25000000, 7000000, { 0x02, 0x8f, 0x5c, 0x29, 0x05, 0x1e,
-		0xb8, 0x14, 0x00, 0xa3, 0xdc, 0x29, 0x00, 0xa3, 0xd7,
-		0x0a, 0x00, 0xa3, 0xd1, 0xec, 0x01, 0x47, 0xae, 0x05 } },
-	{ 25000000, 6000000, { 0x02, 0x31, 0xbc, 0xb5, 0x04, 0x63,
-		0x79, 0x1b, 0x00, 0x8c, 0x73, 0x91, 0x00, 0x8c, 0x6f,
-		0x2d, 0x00, 0x8c, 0x6a, 0xca, 0x01, 0x18, 0xde, 0x17 } },
-};
-
-/* QPSK SNR lookup table */
-static const struct af9013_snr qpsk_snr_lut[] = {
-	{ 0x000000,  0 },
-	{ 0x0b4771,  0 },
-	{ 0x0c1aed,  1 },
-	{ 0x0d0d27,  2 },
-	{ 0x0e4d19,  3 },
-	{ 0x0e5da8,  4 },
-	{ 0x107097,  5 },
-	{ 0x116975,  6 },
-	{ 0x1252d9,  7 },
-	{ 0x131fa4,  8 },
-	{ 0x13d5e1,  9 },
-	{ 0x148e53, 10 },
-	{ 0x15358b, 11 },
-	{ 0x15dd29, 12 },
-	{ 0x168112, 13 },
-	{ 0x170b61, 14 },
-	{ 0xffffff, 15 },
-};
-
-/* QAM16 SNR lookup table */
-static const struct af9013_snr qam16_snr_lut[] = {
-	{ 0x000000,  0 },
-	{ 0x05eb62,  5 },
-	{ 0x05fecf,  6 },
-	{ 0x060b80,  7 },
-	{ 0x062501,  8 },
-	{ 0x064865,  9 },
-	{ 0x069604, 10 },
-	{ 0x06f356, 11 },
-	{ 0x07706a, 12 },
-	{ 0x0804d3, 13 },
-	{ 0x089d1a, 14 },
-	{ 0x093e3d, 15 },
-	{ 0x09e35d, 16 },
-	{ 0x0a7c3c, 17 },
-	{ 0x0afaf8, 18 },
-	{ 0x0b719d, 19 },
-	{ 0xffffff, 20 },
-};
-
-/* QAM64 SNR lookup table */
-static const struct af9013_snr qam64_snr_lut[] = {
-	{ 0x000000,  0 },
-	{ 0x03109b, 12 },
-	{ 0x0310d4, 13 },
-	{ 0x031920, 14 },
-	{ 0x0322d0, 15 },
-	{ 0x0339fc, 16 },
-	{ 0x0364a1, 17 },
-	{ 0x038bcc, 18 },
-	{ 0x03c7d3, 19 },
-	{ 0x0408cc, 20 },
-	{ 0x043bed, 21 },
-	{ 0x048061, 22 },
-	{ 0x04be95, 23 },
-	{ 0x04fa7d, 24 },
-	{ 0x052405, 25 },
-	{ 0x05570d, 26 },
-	{ 0xffffff, 27 },
-};
-
-static const struct af9013_reg_bit ofsm_init[] = {
-	{ 0xd73a, 0, 8, 0xa1 },
-	{ 0xd73b, 0, 8, 0x1f },
-	{ 0xd73c, 4, 4, 0x0a },
-	{ 0xd732, 3, 1, 0x00 },
-	{ 0xd731, 4, 2, 0x03 },
-	{ 0xd73d, 7, 1, 0x01 },
-	{ 0xd740, 0, 1, 0x00 },
-	{ 0xd740, 1, 1, 0x00 },
-	{ 0xd740, 2, 1, 0x00 },
-	{ 0xd740, 3, 1, 0x01 },
-	{ 0xd3c1, 4, 1, 0x01 },
-	{ 0x9124, 0, 8, 0x58 },
-	{ 0x9125, 0, 2, 0x02 },
-	{ 0xd3a2, 0, 8, 0x00 },
-	{ 0xd3a3, 0, 8, 0x04 },
-	{ 0xd305, 0, 8, 0x32 },
-	{ 0xd306, 0, 8, 0x10 },
-	{ 0xd304, 0, 8, 0x04 },
-	{ 0x9112, 0, 1, 0x01 },
-	{ 0x911d, 0, 1, 0x01 },
-	{ 0x911a, 0, 1, 0x01 },
-	{ 0x911b, 0, 1, 0x01 },
-	{ 0x9bce, 0, 4, 0x02 },
-	{ 0x9116, 0, 1, 0x01 },
-	{ 0x9122, 0, 8, 0xd0 },
-	{ 0xd2e0, 0, 8, 0xd0 },
-	{ 0xd2e9, 0, 4, 0x0d },
-	{ 0xd38c, 0, 8, 0xfc },
-	{ 0xd38d, 0, 8, 0x00 },
-	{ 0xd38e, 0, 8, 0x7e },
-	{ 0xd38f, 0, 8, 0x00 },
-	{ 0xd390, 0, 8, 0x2f },
-	{ 0xd145, 4, 1, 0x01 },
-	{ 0xd1a9, 4, 1, 0x01 },
-	{ 0xd158, 5, 3, 0x01 },
-	{ 0xd159, 0, 6, 0x06 },
-	{ 0xd167, 0, 8, 0x00 },
-	{ 0xd168, 0, 4, 0x07 },
-	{ 0xd1c3, 5, 3, 0x00 },
-	{ 0xd1c4, 0, 6, 0x00 },
-	{ 0xd1c5, 0, 7, 0x10 },
-	{ 0xd1c6, 0, 3, 0x02 },
-	{ 0xd080, 2, 5, 0x03 },
-	{ 0xd081, 4, 4, 0x09 },
-	{ 0xd098, 4, 4, 0x0f },
-	{ 0xd098, 0, 4, 0x03 },
-	{ 0xdbc0, 4, 1, 0x01 },
-	{ 0xdbc7, 0, 8, 0x08 },
-	{ 0xdbc8, 4, 4, 0x00 },
-	{ 0xdbc9, 0, 5, 0x01 },
-	{ 0xd280, 0, 8, 0xe0 },
-	{ 0xd281, 0, 8, 0xff },
-	{ 0xd282, 0, 8, 0xff },
-	{ 0xd283, 0, 8, 0xc3 },
-	{ 0xd284, 0, 8, 0xff },
-	{ 0xd285, 0, 4, 0x01 },
-	{ 0xd0f0, 0, 7, 0x1a },
-	{ 0xd0f1, 4, 1, 0x01 },
-	{ 0xd0f2, 0, 8, 0x0c },
-	{ 0xd101, 5, 3, 0x06 },
-	{ 0xd103, 0, 4, 0x08 },
-	{ 0xd0f8, 0, 7, 0x20 },
-	{ 0xd111, 5, 1, 0x00 },
-	{ 0xd111, 6, 1, 0x00 },
-	{ 0x910b, 0, 8, 0x0a },
-	{ 0x9115, 0, 8, 0x02 },
-	{ 0x910c, 0, 8, 0x02 },
-	{ 0x910d, 0, 8, 0x08 },
-	{ 0x910e, 0, 8, 0x0a },
-	{ 0x9bf6, 0, 8, 0x06 },
-	{ 0x9bf8, 0, 8, 0x02 },
-	{ 0x9bf7, 0, 8, 0x05 },
-	{ 0x9bf9, 0, 8, 0x0f },
-	{ 0x9bfc, 0, 8, 0x13 },
-	{ 0x9bd3, 0, 8, 0xff },
-	{ 0x9bbe, 0, 1, 0x01 },
-	{ 0x9bcc, 0, 1, 0x01 },
-};
-
-/* Panasonic ENV77H11D5 tuner init
-   AF9013_TUNER_ENV77H11D5 = 129 */
-static const struct af9013_reg_bit tuner_init_env77h11d5[] = {
-	{ 0x9bd5, 0, 8, 0x01 },
-	{ 0x9bd6, 0, 8, 0x03 },
-	{ 0x9bbe, 0, 8, 0x01 },
-	{ 0xd1a0, 1, 1, 0x01 },
-	{ 0xd000, 0, 1, 0x01 },
-	{ 0xd000, 1, 1, 0x00 },
-	{ 0xd001, 1, 1, 0x01 },
-	{ 0xd001, 0, 1, 0x00 },
-	{ 0xd001, 5, 1, 0x00 },
-	{ 0xd002, 0, 5, 0x19 },
-	{ 0xd003, 0, 5, 0x1a },
-	{ 0xd004, 0, 5, 0x19 },
-	{ 0xd005, 0, 5, 0x1a },
-	{ 0xd00e, 0, 5, 0x10 },
-	{ 0xd00f, 0, 3, 0x04 },
-	{ 0xd00f, 3, 3, 0x05 },
-	{ 0xd010, 0, 3, 0x04 },
-	{ 0xd010, 3, 3, 0x05 },
-	{ 0xd016, 4, 4, 0x03 },
-	{ 0xd01f, 0, 6, 0x0a },
-	{ 0xd020, 0, 6, 0x0a },
-	{ 0x9bda, 0, 8, 0x00 },
-	{ 0x9be3, 0, 8, 0x00 },
-	{ 0xd015, 0, 8, 0x50 },
-	{ 0xd016, 0, 1, 0x00 },
-	{ 0xd044, 0, 8, 0x46 },
-	{ 0xd045, 0, 1, 0x00 },
-	{ 0xd008, 0, 8, 0xdf },
-	{ 0xd009, 0, 2, 0x02 },
-	{ 0xd006, 0, 8, 0x44 },
-	{ 0xd007, 0, 2, 0x01 },
-	{ 0xd00c, 0, 8, 0xeb },
-	{ 0xd00d, 0, 2, 0x02 },
-	{ 0xd00a, 0, 8, 0xf4 },
-	{ 0xd00b, 0, 2, 0x01 },
-	{ 0x9bba, 0, 8, 0xf9 },
-	{ 0x9bc3, 0, 8, 0xdf },
-	{ 0x9bc4, 0, 8, 0x02 },
-	{ 0x9bc5, 0, 8, 0xeb },
-	{ 0x9bc6, 0, 8, 0x02 },
-	{ 0x9bc9, 0, 8, 0x52 },
-	{ 0xd011, 0, 8, 0x3c },
-	{ 0xd012, 0, 2, 0x01 },
-	{ 0xd013, 0, 8, 0xf7 },
-	{ 0xd014, 0, 2, 0x02 },
-	{ 0xd040, 0, 8, 0x0b },
-	{ 0xd041, 0, 2, 0x02 },
-	{ 0xd042, 0, 8, 0x4d },
-	{ 0xd043, 0, 2, 0x00 },
-	{ 0xd045, 1, 1, 0x00 },
-	{ 0x9bcf, 0, 1, 0x01 },
-	{ 0xd045, 2, 1, 0x01 },
-	{ 0xd04f, 0, 8, 0x9a },
-	{ 0xd050, 0, 1, 0x01 },
-	{ 0xd051, 0, 8, 0x5a },
-	{ 0xd052, 0, 1, 0x01 },
-	{ 0xd053, 0, 8, 0x50 },
-	{ 0xd054, 0, 8, 0x46 },
-	{ 0x9bd7, 0, 8, 0x0a },
-	{ 0x9bd8, 0, 8, 0x14 },
-	{ 0x9bd9, 0, 8, 0x08 },
-};
-
-/* Microtune MT2060 tuner init
-   AF9013_TUNER_MT2060     = 130 */
-static const struct af9013_reg_bit tuner_init_mt2060[] = {
-	{ 0x9bd5, 0, 8, 0x01 },
-	{ 0x9bd6, 0, 8, 0x07 },
-	{ 0xd1a0, 1, 1, 0x01 },
-	{ 0xd000, 0, 1, 0x01 },
-	{ 0xd000, 1, 1, 0x00 },
-	{ 0xd001, 1, 1, 0x01 },
-	{ 0xd001, 0, 1, 0x00 },
-	{ 0xd001, 5, 1, 0x00 },
-	{ 0xd002, 0, 5, 0x19 },
-	{ 0xd003, 0, 5, 0x1a },
-	{ 0xd004, 0, 5, 0x19 },
-	{ 0xd005, 0, 5, 0x1a },
-	{ 0xd00e, 0, 5, 0x10 },
-	{ 0xd00f, 0, 3, 0x04 },
-	{ 0xd00f, 3, 3, 0x05 },
-	{ 0xd010, 0, 3, 0x04 },
-	{ 0xd010, 3, 3, 0x05 },
-	{ 0xd016, 4, 4, 0x03 },
-	{ 0xd01f, 0, 6, 0x0a },
-	{ 0xd020, 0, 6, 0x0a },
-	{ 0x9bda, 0, 8, 0x00 },
-	{ 0x9be3, 0, 8, 0x00 },
-	{ 0x9bbe, 0, 1, 0x00 },
-	{ 0x9bcc, 0, 1, 0x00 },
-	{ 0x9bb9, 0, 8, 0x75 },
-	{ 0x9bcd, 0, 8, 0x24 },
-	{ 0x9bff, 0, 8, 0x30 },
-	{ 0xd015, 0, 8, 0x46 },
-	{ 0xd016, 0, 1, 0x00 },
-	{ 0xd044, 0, 8, 0x46 },
-	{ 0xd045, 0, 1, 0x00 },
-	{ 0xd008, 0, 8, 0x0f },
-	{ 0xd009, 0, 2, 0x02 },
-	{ 0xd006, 0, 8, 0x32 },
-	{ 0xd007, 0, 2, 0x01 },
-	{ 0xd00c, 0, 8, 0x36 },
-	{ 0xd00d, 0, 2, 0x03 },
-	{ 0xd00a, 0, 8, 0x35 },
-	{ 0xd00b, 0, 2, 0x01 },
-	{ 0x9bc7, 0, 8, 0x07 },
-	{ 0x9bc8, 0, 8, 0x90 },
-	{ 0x9bc3, 0, 8, 0x0f },
-	{ 0x9bc4, 0, 8, 0x02 },
-	{ 0x9bc5, 0, 8, 0x36 },
-	{ 0x9bc6, 0, 8, 0x03 },
-	{ 0x9bba, 0, 8, 0xc9 },
-	{ 0x9bc9, 0, 8, 0x79 },
-	{ 0xd011, 0, 8, 0x10 },
-	{ 0xd012, 0, 2, 0x01 },
-	{ 0xd013, 0, 8, 0x45 },
-	{ 0xd014, 0, 2, 0x03 },
-	{ 0xd040, 0, 8, 0x98 },
-	{ 0xd041, 0, 2, 0x00 },
-	{ 0xd042, 0, 8, 0xcf },
-	{ 0xd043, 0, 2, 0x03 },
-	{ 0xd045, 1, 1, 0x00 },
-	{ 0x9bcf, 0, 1, 0x01 },
-	{ 0xd045, 2, 1, 0x01 },
-	{ 0xd04f, 0, 8, 0x9a },
-	{ 0xd050, 0, 1, 0x01 },
-	{ 0xd051, 0, 8, 0x5a },
-	{ 0xd052, 0, 1, 0x01 },
-	{ 0xd053, 0, 8, 0x50 },
-	{ 0xd054, 0, 8, 0x46 },
-	{ 0x9bd7, 0, 8, 0x0a },
-	{ 0x9bd8, 0, 8, 0x14 },
-	{ 0x9bd9, 0, 8, 0x08 },
-	{ 0x9bd0, 0, 8, 0xcc },
-	{ 0x9be4, 0, 8, 0xa0 },
-	{ 0x9bbd, 0, 8, 0x8e },
-	{ 0x9be2, 0, 8, 0x4d },
-	{ 0x9bee, 0, 1, 0x01 },
-};
-
-/* Microtune MT2060 tuner init
-   AF9013_TUNER_MT2060_2   = 147 */
-static const struct af9013_reg_bit tuner_init_mt2060_2[] = {
-	{ 0x9bd5, 0, 8, 0x01 },
-	{ 0x9bd6, 0, 8, 0x06 },
-	{ 0x9bbe, 0, 8, 0x01 },
-	{ 0xd1a0, 1, 1, 0x01 },
-	{ 0xd000, 0, 1, 0x01 },
-	{ 0xd000, 1, 1, 0x00 },
-	{ 0xd001, 1, 1, 0x01 },
-	{ 0xd001, 0, 1, 0x00 },
-	{ 0xd001, 5, 1, 0x00 },
-	{ 0xd002, 0, 5, 0x19 },
-	{ 0xd003, 0, 5, 0x1a },
-	{ 0xd004, 0, 5, 0x19 },
-	{ 0xd005, 0, 5, 0x1a },
-	{ 0xd00e, 0, 5, 0x10 },
-	{ 0xd00f, 0, 3, 0x04 },
-	{ 0xd00f, 3, 3, 0x05 },
-	{ 0xd010, 0, 3, 0x04 },
-	{ 0xd010, 3, 3, 0x05 },
-	{ 0xd016, 4, 4, 0x03 },
-	{ 0xd01f, 0, 6, 0x0a },
-	{ 0xd020, 0, 6, 0x0a },
-	{ 0xd015, 0, 8, 0x46 },
-	{ 0xd016, 0, 1, 0x00 },
-	{ 0xd044, 0, 8, 0x46 },
-	{ 0xd045, 0, 1, 0x00 },
-	{ 0xd008, 0, 8, 0x0f },
-	{ 0xd009, 0, 2, 0x02 },
-	{ 0xd006, 0, 8, 0x32 },
-	{ 0xd007, 0, 2, 0x01 },
-	{ 0xd00c, 0, 8, 0x36 },
-	{ 0xd00d, 0, 2, 0x03 },
-	{ 0xd00a, 0, 8, 0x35 },
-	{ 0xd00b, 0, 2, 0x01 },
-	{ 0x9bc7, 0, 8, 0x07 },
-	{ 0x9bc8, 0, 8, 0x90 },
-	{ 0x9bc3, 0, 8, 0x0f },
-	{ 0x9bc4, 0, 8, 0x02 },
-	{ 0x9bc5, 0, 8, 0x36 },
-	{ 0x9bc6, 0, 8, 0x03 },
-	{ 0x9bba, 0, 8, 0xc9 },
-	{ 0x9bc9, 0, 8, 0x79 },
-	{ 0xd011, 0, 8, 0x10 },
-	{ 0xd012, 0, 2, 0x01 },
-	{ 0xd013, 0, 8, 0x45 },
-	{ 0xd014, 0, 2, 0x03 },
-	{ 0xd040, 0, 8, 0x98 },
-	{ 0xd041, 0, 2, 0x00 },
-	{ 0xd042, 0, 8, 0xcf },
-	{ 0xd043, 0, 2, 0x03 },
-	{ 0xd045, 1, 1, 0x00 },
-	{ 0x9bcf, 0, 8, 0x01 },
-	{ 0xd045, 2, 1, 0x01 },
-	{ 0xd04f, 0, 8, 0x9a },
-	{ 0xd050, 0, 1, 0x01 },
-	{ 0xd051, 0, 8, 0x5a },
-	{ 0xd052, 0, 1, 0x01 },
-	{ 0xd053, 0, 8, 0x96 },
-	{ 0xd054, 0, 8, 0x46 },
-	{ 0xd045, 7, 1, 0x00 },
-	{ 0x9bd7, 0, 8, 0x0a },
-	{ 0x9bd8, 0, 8, 0x14 },
-	{ 0x9bd9, 0, 8, 0x08 },
-};
-
-/* MaxLinear MXL5003 tuner init
-   AF9013_TUNER_MXL5003D   =   3 */
-static const struct af9013_reg_bit tuner_init_mxl5003d[] = {
-	{ 0x9bd5, 0, 8, 0x01 },
-	{ 0x9bd6, 0, 8, 0x09 },
-	{ 0xd1a0, 1, 1, 0x01 },
-	{ 0xd000, 0, 1, 0x01 },
-	{ 0xd000, 1, 1, 0x00 },
-	{ 0xd001, 1, 1, 0x01 },
-	{ 0xd001, 0, 1, 0x00 },
-	{ 0xd001, 5, 1, 0x00 },
-	{ 0xd002, 0, 5, 0x19 },
-	{ 0xd003, 0, 5, 0x1a },
-	{ 0xd004, 0, 5, 0x19 },
-	{ 0xd005, 0, 5, 0x1a },
-	{ 0xd00e, 0, 5, 0x10 },
-	{ 0xd00f, 0, 3, 0x04 },
-	{ 0xd00f, 3, 3, 0x05 },
-	{ 0xd010, 0, 3, 0x04 },
-	{ 0xd010, 3, 3, 0x05 },
-	{ 0xd016, 4, 4, 0x03 },
-	{ 0xd01f, 0, 6, 0x0a },
-	{ 0xd020, 0, 6, 0x0a },
-	{ 0x9bda, 0, 8, 0x00 },
-	{ 0x9be3, 0, 8, 0x00 },
-	{ 0x9bfc, 0, 8, 0x0f },
-	{ 0x9bf6, 0, 8, 0x01 },
-	{ 0x9bbe, 0, 1, 0x01 },
-	{ 0xd015, 0, 8, 0x33 },
-	{ 0xd016, 0, 1, 0x00 },
-	{ 0xd044, 0, 8, 0x40 },
-	{ 0xd045, 0, 1, 0x00 },
-	{ 0xd008, 0, 8, 0x0f },
-	{ 0xd009, 0, 2, 0x02 },
-	{ 0xd006, 0, 8, 0x6c },
-	{ 0xd007, 0, 2, 0x00 },
-	{ 0xd00c, 0, 8, 0x3d },
-	{ 0xd00d, 0, 2, 0x00 },
-	{ 0xd00a, 0, 8, 0x45 },
-	{ 0xd00b, 0, 2, 0x01 },
-	{ 0x9bc7, 0, 8, 0x07 },
-	{ 0x9bc8, 0, 8, 0x52 },
-	{ 0x9bc3, 0, 8, 0x0f },
-	{ 0x9bc4, 0, 8, 0x02 },
-	{ 0x9bc5, 0, 8, 0x3d },
-	{ 0x9bc6, 0, 8, 0x00 },
-	{ 0x9bba, 0, 8, 0xa2 },
-	{ 0x9bc9, 0, 8, 0xa0 },
-	{ 0xd011, 0, 8, 0x56 },
-	{ 0xd012, 0, 2, 0x00 },
-	{ 0xd013, 0, 8, 0x50 },
-	{ 0xd014, 0, 2, 0x00 },
-	{ 0xd040, 0, 8, 0x56 },
-	{ 0xd041, 0, 2, 0x00 },
-	{ 0xd042, 0, 8, 0x50 },
-	{ 0xd043, 0, 2, 0x00 },
-	{ 0xd045, 1, 1, 0x00 },
-	{ 0x9bcf, 0, 8, 0x01 },
-	{ 0xd045, 2, 1, 0x01 },
-	{ 0xd04f, 0, 8, 0x9a },
-	{ 0xd050, 0, 1, 0x01 },
-	{ 0xd051, 0, 8, 0x5a },
-	{ 0xd052, 0, 1, 0x01 },
-	{ 0xd053, 0, 8, 0x50 },
-	{ 0xd054, 0, 8, 0x46 },
-	{ 0x9bd7, 0, 8, 0x0a },
-	{ 0x9bd8, 0, 8, 0x14 },
-	{ 0x9bd9, 0, 8, 0x08 },
-};
-
-/* MaxLinear MXL5005S & MXL5007T tuner init
-   AF9013_TUNER_MXL5005D   =  13
-   AF9013_TUNER_MXL5005R   =  30
-   AF9013_TUNER_MXL5007T   = 177 */
-static const struct af9013_reg_bit tuner_init_mxl5005[] = {
-	{ 0x9bd5, 0, 8, 0x01 },
-	{ 0x9bd6, 0, 8, 0x07 },
-	{ 0xd1a0, 1, 1, 0x01 },
-	{ 0xd000, 0, 1, 0x01 },
-	{ 0xd000, 1, 1, 0x00 },
-	{ 0xd001, 1, 1, 0x01 },
-	{ 0xd001, 0, 1, 0x00 },
-	{ 0xd001, 5, 1, 0x00 },
-	{ 0xd002, 0, 5, 0x19 },
-	{ 0xd003, 0, 5, 0x1a },
-	{ 0xd004, 0, 5, 0x19 },
-	{ 0xd005, 0, 5, 0x1a },
-	{ 0xd00e, 0, 5, 0x10 },
-	{ 0xd00f, 0, 3, 0x04 },
-	{ 0xd00f, 3, 3, 0x05 },
-	{ 0xd010, 0, 3, 0x04 },
-	{ 0xd010, 3, 3, 0x05 },
-	{ 0xd016, 4, 4, 0x03 },
-	{ 0xd01f, 0, 6, 0x0a },
-	{ 0xd020, 0, 6, 0x0a },
-	{ 0x9bda, 0, 8, 0x01 },
-	{ 0x9be3, 0, 8, 0x01 },
-	{ 0x9bbe, 0, 1, 0x01 },
-	{ 0x9bcc, 0, 1, 0x01 },
-	{ 0x9bb9, 0, 8, 0x00 },
-	{ 0x9bcd, 0, 8, 0x28 },
-	{ 0x9bff, 0, 8, 0x24 },
-	{ 0xd015, 0, 8, 0x40 },
-	{ 0xd016, 0, 1, 0x00 },
-	{ 0xd044, 0, 8, 0x40 },
-	{ 0xd045, 0, 1, 0x00 },
-	{ 0xd008, 0, 8, 0x0f },
-	{ 0xd009, 0, 2, 0x02 },
-	{ 0xd006, 0, 8, 0x73 },
-	{ 0xd007, 0, 2, 0x01 },
-	{ 0xd00c, 0, 8, 0xfa },
-	{ 0xd00d, 0, 2, 0x01 },
-	{ 0xd00a, 0, 8, 0xff },
-	{ 0xd00b, 0, 2, 0x01 },
-	{ 0x9bc7, 0, 8, 0x23 },
-	{ 0x9bc8, 0, 8, 0x55 },
-	{ 0x9bc3, 0, 8, 0x01 },
-	{ 0x9bc4, 0, 8, 0x02 },
-	{ 0x9bc5, 0, 8, 0xfa },
-	{ 0x9bc6, 0, 8, 0x01 },
-	{ 0x9bba, 0, 8, 0xff },
-	{ 0x9bc9, 0, 8, 0xff },
-	{ 0x9bd3, 0, 8, 0x95 },
-	{ 0xd011, 0, 8, 0x70 },
-	{ 0xd012, 0, 2, 0x01 },
-	{ 0xd013, 0, 8, 0xfb },
-	{ 0xd014, 0, 2, 0x01 },
-	{ 0xd040, 0, 8, 0x70 },
-	{ 0xd041, 0, 2, 0x01 },
-	{ 0xd042, 0, 8, 0xfb },
-	{ 0xd043, 0, 2, 0x01 },
-	{ 0xd045, 1, 1, 0x00 },
-	{ 0x9bcf, 0, 1, 0x01 },
-	{ 0xd045, 2, 1, 0x01 },
-	{ 0xd04f, 0, 8, 0x9a },
-	{ 0xd050, 0, 1, 0x01 },
-	{ 0xd051, 0, 8, 0x5a },
-	{ 0xd052, 0, 1, 0x01 },
-	{ 0xd053, 0, 8, 0x50 },
-	{ 0xd054, 0, 8, 0x46 },
-	{ 0x9bd7, 0, 8, 0x0a },
-	{ 0x9bd8, 0, 8, 0x14 },
-	{ 0x9bd9, 0, 8, 0x08 },
-	{ 0x9bd0, 0, 8, 0x93 },
-	{ 0x9be4, 0, 8, 0xfe },
-	{ 0x9bbd, 0, 8, 0x63 },
-	{ 0x9be2, 0, 8, 0xfe },
-	{ 0x9bee, 0, 1, 0x01 },
-};
-
-/* Quantek QT1010 tuner init
-   AF9013_TUNER_QT1010     = 134
-   AF9013_TUNER_QT1010A    = 162 */
-static const struct af9013_reg_bit tuner_init_qt1010[] = {
-	{ 0x9bd5, 0, 8, 0x01 },
-	{ 0x9bd6, 0, 8, 0x09 },
-	{ 0xd1a0, 1, 1, 0x01 },
-	{ 0xd000, 0, 1, 0x01 },
-	{ 0xd000, 1, 1, 0x00 },
-	{ 0xd001, 1, 1, 0x01 },
-	{ 0xd001, 0, 1, 0x00 },
-	{ 0xd001, 5, 1, 0x00 },
-	{ 0xd002, 0, 5, 0x19 },
-	{ 0xd003, 0, 5, 0x1a },
-	{ 0xd004, 0, 5, 0x19 },
-	{ 0xd005, 0, 5, 0x1a },
-	{ 0xd00e, 0, 5, 0x10 },
-	{ 0xd00f, 0, 3, 0x04 },
-	{ 0xd00f, 3, 3, 0x05 },
-	{ 0xd010, 0, 3, 0x04 },
-	{ 0xd010, 3, 3, 0x05 },
-	{ 0xd016, 4, 4, 0x03 },
-	{ 0xd01f, 0, 6, 0x0a },
-	{ 0xd020, 0, 6, 0x0a },
-	{ 0x9bda, 0, 8, 0x01 },
-	{ 0x9be3, 0, 8, 0x01 },
-	{ 0xd015, 0, 8, 0x46 },
-	{ 0xd016, 0, 1, 0x00 },
-	{ 0xd044, 0, 8, 0x46 },
-	{ 0xd045, 0, 1, 0x00 },
-	{ 0x9bbe, 0, 1, 0x01 },
-	{ 0x9bcc, 0, 1, 0x01 },
-	{ 0x9bb9, 0, 8, 0x00 },
-	{ 0x9bcd, 0, 8, 0x28 },
-	{ 0x9bff, 0, 8, 0x20 },
-	{ 0xd008, 0, 8, 0x0f },
-	{ 0xd009, 0, 2, 0x02 },
-	{ 0xd006, 0, 8, 0x99 },
-	{ 0xd007, 0, 2, 0x01 },
-	{ 0xd00c, 0, 8, 0x0f },
-	{ 0xd00d, 0, 2, 0x02 },
-	{ 0xd00a, 0, 8, 0x50 },
-	{ 0xd00b, 0, 2, 0x01 },
-	{ 0x9bc7, 0, 8, 0x00 },
-	{ 0x9bc8, 0, 8, 0x00 },
-	{ 0x9bc3, 0, 8, 0x0f },
-	{ 0x9bc4, 0, 8, 0x02 },
-	{ 0x9bc5, 0, 8, 0x0f },
-	{ 0x9bc6, 0, 8, 0x02 },
-	{ 0x9bba, 0, 8, 0xc5 },
-	{ 0x9bc9, 0, 8, 0xff },
-	{ 0xd011, 0, 8, 0x58 },
-	{ 0xd012, 0, 2, 0x02 },
-	{ 0xd013, 0, 8, 0x89 },
-	{ 0xd014, 0, 2, 0x01 },
-	{ 0xd040, 0, 8, 0x58 },
-	{ 0xd041, 0, 2, 0x02 },
-	{ 0xd042, 0, 8, 0x89 },
-	{ 0xd043, 0, 2, 0x01 },
-	{ 0xd045, 1, 1, 0x00 },
-	{ 0x9bcf, 0, 1, 0x01 },
-	{ 0xd045, 2, 1, 0x01 },
-	{ 0xd04f, 0, 8, 0x9a },
-	{ 0xd050, 0, 1, 0x01 },
-	{ 0xd051, 0, 8, 0x5a },
-	{ 0xd052, 0, 1, 0x01 },
-	{ 0xd053, 0, 8, 0x50 },
-	{ 0xd054, 0, 8, 0x46 },
-	{ 0x9bd7, 0, 8, 0x0a },
-	{ 0x9bd8, 0, 8, 0x14 },
-	{ 0x9bd9, 0, 8, 0x08 },
-	{ 0x9bd0, 0, 8, 0xcd },
-	{ 0x9be4, 0, 8, 0xbb },
-	{ 0x9bbd, 0, 8, 0x93 },
-	{ 0x9be2, 0, 8, 0x80 },
-	{ 0x9bee, 0, 1, 0x01 },
-};
-
-/* Freescale MC44S803 tuner init
-   AF9013_TUNER_MC44S803   = 133 */
-static const struct af9013_reg_bit tuner_init_mc44s803[] = {
-	{ 0x9bd5, 0, 8, 0x01 },
-	{ 0x9bd6, 0, 8, 0x06 },
-	{ 0xd1a0, 1, 1, 0x01 },
-	{ 0xd000, 0, 1, 0x01 },
-	{ 0xd000, 1, 1, 0x00 },
-	{ 0xd001, 1, 1, 0x01 },
-	{ 0xd001, 0, 1, 0x00 },
-	{ 0xd001, 5, 1, 0x00 },
-	{ 0xd002, 0, 5, 0x19 },
-	{ 0xd003, 0, 5, 0x1a },
-	{ 0xd004, 0, 5, 0x19 },
-	{ 0xd005, 0, 5, 0x1a },
-	{ 0xd00e, 0, 5, 0x10 },
-	{ 0xd00f, 0, 3, 0x04 },
-	{ 0xd00f, 3, 3, 0x05 },
-	{ 0xd010, 0, 3, 0x04 },
-	{ 0xd010, 3, 3, 0x05 },
-	{ 0xd016, 4, 4, 0x03 },
-	{ 0xd01f, 0, 6, 0x0a },
-	{ 0xd020, 0, 6, 0x0a },
-	{ 0x9bda, 0, 8, 0x00 },
-	{ 0x9be3, 0, 8, 0x00 },
-	{ 0x9bf6, 0, 8, 0x01 },
-	{ 0x9bf8, 0, 8, 0x02 },
-	{ 0x9bf9, 0, 8, 0x02 },
-	{ 0x9bfc, 0, 8, 0x1f },
-	{ 0x9bbe, 0, 1, 0x01 },
-	{ 0x9bcc, 0, 1, 0x01 },
-	{ 0x9bb9, 0, 8, 0x00 },
-	{ 0x9bcd, 0, 8, 0x24 },
-	{ 0x9bff, 0, 8, 0x24 },
-	{ 0xd015, 0, 8, 0x46 },
-	{ 0xd016, 0, 1, 0x00 },
-	{ 0xd044, 0, 8, 0x46 },
-	{ 0xd045, 0, 1, 0x00 },
-	{ 0xd008, 0, 8, 0x01 },
-	{ 0xd009, 0, 2, 0x02 },
-	{ 0xd006, 0, 8, 0x7b },
-	{ 0xd007, 0, 2, 0x00 },
-	{ 0xd00c, 0, 8, 0x7c },
-	{ 0xd00d, 0, 2, 0x02 },
-	{ 0xd00a, 0, 8, 0xfe },
-	{ 0xd00b, 0, 2, 0x01 },
-	{ 0x9bc7, 0, 8, 0x08 },
-	{ 0x9bc8, 0, 8, 0x9a },
-	{ 0x9bc3, 0, 8, 0x01 },
-	{ 0x9bc4, 0, 8, 0x02 },
-	{ 0x9bc5, 0, 8, 0x7c },
-	{ 0x9bc6, 0, 8, 0x02 },
-	{ 0x9bba, 0, 8, 0xfc },
-	{ 0x9bc9, 0, 8, 0xaa },
-	{ 0xd011, 0, 8, 0x6b },
-	{ 0xd012, 0, 2, 0x00 },
-	{ 0xd013, 0, 8, 0x88 },
-	{ 0xd014, 0, 2, 0x02 },
-	{ 0xd040, 0, 8, 0x6b },
-	{ 0xd041, 0, 2, 0x00 },
-	{ 0xd042, 0, 8, 0x7c },
-	{ 0xd043, 0, 2, 0x02 },
-	{ 0xd045, 1, 1, 0x00 },
-	{ 0x9bcf, 0, 1, 0x01 },
-	{ 0xd045, 2, 1, 0x01 },
-	{ 0xd04f, 0, 8, 0x9a },
-	{ 0xd050, 0, 1, 0x01 },
-	{ 0xd051, 0, 8, 0x5a },
-	{ 0xd052, 0, 1, 0x01 },
-	{ 0xd053, 0, 8, 0x50 },
-	{ 0xd054, 0, 8, 0x46 },
-	{ 0x9bd7, 0, 8, 0x0a },
-	{ 0x9bd8, 0, 8, 0x14 },
-	{ 0x9bd9, 0, 8, 0x08 },
-	{ 0x9bd0, 0, 8, 0x9e },
-	{ 0x9be4, 0, 8, 0xff },
-	{ 0x9bbd, 0, 8, 0x9e },
-	{ 0x9be2, 0, 8, 0x25 },
-	{ 0x9bee, 0, 1, 0x01 },
-	{ 0xd73b, 3, 1, 0x00 },
-};
-
-/* unknown, probably for tin can tuner, tuner init
-   AF9013_TUNER_UNKNOWN   = 140 */
-static const struct af9013_reg_bit tuner_init_unknown[] = {
-	{ 0x9bd5, 0, 8, 0x01 },
-	{ 0x9bd6, 0, 8, 0x02 },
-	{ 0xd1a0, 1, 1, 0x01 },
-	{ 0xd000, 0, 1, 0x01 },
-	{ 0xd000, 1, 1, 0x00 },
-	{ 0xd001, 1, 1, 0x01 },
-	{ 0xd001, 0, 1, 0x00 },
-	{ 0xd001, 5, 1, 0x00 },
-	{ 0xd002, 0, 5, 0x19 },
-	{ 0xd003, 0, 5, 0x1a },
-	{ 0xd004, 0, 5, 0x19 },
-	{ 0xd005, 0, 5, 0x1a },
-	{ 0xd00e, 0, 5, 0x10 },
-	{ 0xd00f, 0, 3, 0x04 },
-	{ 0xd00f, 3, 3, 0x05 },
-	{ 0xd010, 0, 3, 0x04 },
-	{ 0xd010, 3, 3, 0x05 },
-	{ 0xd016, 4, 4, 0x03 },
-	{ 0xd01f, 0, 6, 0x0a },
-	{ 0xd020, 0, 6, 0x0a },
-	{ 0x9bda, 0, 8, 0x01 },
-	{ 0x9be3, 0, 8, 0x01 },
-	{ 0xd1a0, 1, 1, 0x00 },
-	{ 0x9bbe, 0, 1, 0x01 },
-	{ 0x9bcc, 0, 1, 0x01 },
-	{ 0x9bb9, 0, 8, 0x00 },
-	{ 0x9bcd, 0, 8, 0x18 },
-	{ 0x9bff, 0, 8, 0x2c },
-	{ 0xd015, 0, 8, 0x46 },
-	{ 0xd016, 0, 1, 0x00 },
-	{ 0xd044, 0, 8, 0x46 },
-	{ 0xd045, 0, 1, 0x00 },
-	{ 0xd008, 0, 8, 0xdf },
-	{ 0xd009, 0, 2, 0x02 },
-	{ 0xd006, 0, 8, 0x44 },
-	{ 0xd007, 0, 2, 0x01 },
-	{ 0xd00c, 0, 8, 0x00 },
-	{ 0xd00d, 0, 2, 0x02 },
-	{ 0xd00a, 0, 8, 0xf6 },
-	{ 0xd00b, 0, 2, 0x01 },
-	{ 0x9bba, 0, 8, 0xf9 },
-	{ 0x9bc8, 0, 8, 0xaa },
-	{ 0x9bc3, 0, 8, 0xdf },
-	{ 0x9bc4, 0, 8, 0x02 },
-	{ 0x9bc5, 0, 8, 0x00 },
-	{ 0x9bc6, 0, 8, 0x02 },
-	{ 0x9bc9, 0, 8, 0xf0 },
-	{ 0xd011, 0, 8, 0x3c },
-	{ 0xd012, 0, 2, 0x01 },
-	{ 0xd013, 0, 8, 0xf7 },
-	{ 0xd014, 0, 2, 0x02 },
-	{ 0xd040, 0, 8, 0x0b },
-	{ 0xd041, 0, 2, 0x02 },
-	{ 0xd042, 0, 8, 0x4d },
-	{ 0xd043, 0, 2, 0x00 },
-	{ 0xd045, 1, 1, 0x00 },
-	{ 0x9bcf, 0, 1, 0x01 },
-	{ 0xd045, 2, 1, 0x01 },
-	{ 0xd04f, 0, 8, 0x9a },
-	{ 0xd050, 0, 1, 0x01 },
-	{ 0xd051, 0, 8, 0x5a },
-	{ 0xd052, 0, 1, 0x01 },
-	{ 0xd053, 0, 8, 0x50 },
-	{ 0xd054, 0, 8, 0x46 },
-	{ 0x9bd7, 0, 8, 0x0a },
-	{ 0x9bd8, 0, 8, 0x14 },
-	{ 0x9bd9, 0, 8, 0x08 },
-};
-
-/* NXP TDA18271 & TDA18218 tuner init
-   AF9013_TUNER_TDA18271   = 156
-   AF9013_TUNER_TDA18218   = 179 */
-static const struct af9013_reg_bit tuner_init_tda18271[] = {
-	{ 0x9bd5, 0, 8, 0x01 },
-	{ 0x9bd6, 0, 8, 0x04 },
-	{ 0xd1a0, 1, 1, 0x01 },
-	{ 0xd000, 0, 1, 0x01 },
-	{ 0xd000, 1, 1, 0x00 },
-	{ 0xd001, 1, 1, 0x01 },
-	{ 0xd001, 0, 1, 0x00 },
-	{ 0xd001, 5, 1, 0x00 },
-	{ 0xd002, 0, 5, 0x19 },
-	{ 0xd003, 0, 5, 0x1a },
-	{ 0xd004, 0, 5, 0x19 },
-	{ 0xd005, 0, 5, 0x1a },
-	{ 0xd00e, 0, 5, 0x10 },
-	{ 0xd00f, 0, 3, 0x04 },
-	{ 0xd00f, 3, 3, 0x05 },
-	{ 0xd010, 0, 3, 0x04 },
-	{ 0xd010, 3, 3, 0x05 },
-	{ 0xd016, 4, 4, 0x03 },
-	{ 0xd01f, 0, 6, 0x0a },
-	{ 0xd020, 0, 6, 0x0a },
-	{ 0x9bda, 0, 8, 0x01 },
-	{ 0x9be3, 0, 8, 0x01 },
-	{ 0xd1a0, 1, 1, 0x00 },
-	{ 0x9bbe, 0, 1, 0x01 },
-	{ 0x9bcc, 0, 1, 0x01 },
-	{ 0x9bb9, 0, 8, 0x00 },
-	{ 0x9bcd, 0, 8, 0x18 },
-	{ 0x9bff, 0, 8, 0x2c },
-	{ 0xd015, 0, 8, 0x46 },
-	{ 0xd016, 0, 1, 0x00 },
-	{ 0xd044, 0, 8, 0x46 },
-	{ 0xd045, 0, 1, 0x00 },
-	{ 0xd008, 0, 8, 0xdf },
-	{ 0xd009, 0, 2, 0x02 },
-	{ 0xd006, 0, 8, 0x44 },
-	{ 0xd007, 0, 2, 0x01 },
-	{ 0xd00c, 0, 8, 0x00 },
-	{ 0xd00d, 0, 2, 0x02 },
-	{ 0xd00a, 0, 8, 0xf6 },
-	{ 0xd00b, 0, 2, 0x01 },
-	{ 0x9bba, 0, 8, 0xf9 },
-	{ 0x9bc8, 0, 8, 0xaa },
-	{ 0x9bc3, 0, 8, 0xdf },
-	{ 0x9bc4, 0, 8, 0x02 },
-	{ 0x9bc5, 0, 8, 0x00 },
-	{ 0x9bc6, 0, 8, 0x02 },
-	{ 0x9bc9, 0, 8, 0xf0 },
-	{ 0xd011, 0, 8, 0x3c },
-	{ 0xd012, 0, 2, 0x01 },
-	{ 0xd013, 0, 8, 0xf7 },
-	{ 0xd014, 0, 2, 0x02 },
-	{ 0xd040, 0, 8, 0x0b },
-	{ 0xd041, 0, 2, 0x02 },
-	{ 0xd042, 0, 8, 0x4d },
-	{ 0xd043, 0, 2, 0x00 },
-	{ 0xd045, 1, 1, 0x00 },
-	{ 0x9bcf, 0, 1, 0x01 },
-	{ 0xd045, 2, 1, 0x01 },
-	{ 0xd04f, 0, 8, 0x9a },
-	{ 0xd050, 0, 1, 0x01 },
-	{ 0xd051, 0, 8, 0x5a },
-	{ 0xd052, 0, 1, 0x01 },
-	{ 0xd053, 0, 8, 0x50 },
-	{ 0xd054, 0, 8, 0x46 },
-	{ 0x9bd7, 0, 8, 0x0a },
-	{ 0x9bd8, 0, 8, 0x14 },
-	{ 0x9bd9, 0, 8, 0x08 },
-	{ 0x9bd0, 0, 8, 0xa8 },
-	{ 0x9be4, 0, 8, 0x7f },
-	{ 0x9bbd, 0, 8, 0xa8 },
-	{ 0x9be2, 0, 8, 0x20 },
-	{ 0x9bee, 0, 1, 0x01 },
-};
-
-#endif /* AF9013_PRIV_H */
diff --git a/drivers/media/dvb/frontends/af9033.c b/drivers/media/dvb/frontends/af9033.c
deleted file mode 100644
index a389982..0000000
--- a/drivers/media/dvb/frontends/af9033.c
+++ /dev/null
@@ -1,980 +0,0 @@
-/*
- * Afatech AF9033 demodulator driver
- *
- * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
- * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include "af9033_priv.h"
-
-struct af9033_state {
-	struct i2c_adapter *i2c;
-	struct dvb_frontend fe;
-	struct af9033_config cfg;
-
-	u32 bandwidth_hz;
-	bool ts_mode_parallel;
-	bool ts_mode_serial;
-
-	u32 ber;
-	u32 ucb;
-	unsigned long last_stat_check;
-};
-
-/* write multiple registers */
-static int af9033_wr_regs(struct af9033_state *state, u32 reg, const u8 *val,
-		int len)
-{
-	int ret;
-	u8 buf[3 + len];
-	struct i2c_msg msg[1] = {
-		{
-			.addr = state->cfg.i2c_addr,
-			.flags = 0,
-			.len = sizeof(buf),
-			.buf = buf,
-		}
-	};
-
-	buf[0] = (reg >> 16) & 0xff;
-	buf[1] = (reg >>  8) & 0xff;
-	buf[2] = (reg >>  0) & 0xff;
-	memcpy(&buf[3], val, len);
-
-	ret = i2c_transfer(state->i2c, msg, 1);
-	if (ret == 1) {
-		ret = 0;
-	} else {
-		printk(KERN_WARNING "%s: i2c wr failed=%d reg=%06x len=%d\n",
-				__func__, ret, reg, len);
-		ret = -EREMOTEIO;
-	}
-
-	return ret;
-}
-
-/* read multiple registers */
-static int af9033_rd_regs(struct af9033_state *state, u32 reg, u8 *val, int len)
-{
-	int ret;
-	u8 buf[3] = { (reg >> 16) & 0xff, (reg >> 8) & 0xff,
-			(reg >> 0) & 0xff };
-	struct i2c_msg msg[2] = {
-		{
-			.addr = state->cfg.i2c_addr,
-			.flags = 0,
-			.len = sizeof(buf),
-			.buf = buf
-		}, {
-			.addr = state->cfg.i2c_addr,
-			.flags = I2C_M_RD,
-			.len = len,
-			.buf = val
-		}
-	};
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-	if (ret == 2) {
-		ret = 0;
-	} else {
-		printk(KERN_WARNING "%s: i2c rd failed=%d reg=%06x len=%d\n",
-				__func__, ret, reg, len);
-		ret = -EREMOTEIO;
-	}
-
-	return ret;
-}
-
-
-/* write single register */
-static int af9033_wr_reg(struct af9033_state *state, u32 reg, u8 val)
-{
-	return af9033_wr_regs(state, reg, &val, 1);
-}
-
-/* read single register */
-static int af9033_rd_reg(struct af9033_state *state, u32 reg, u8 *val)
-{
-	return af9033_rd_regs(state, reg, val, 1);
-}
-
-/* write single register with mask */
-static int af9033_wr_reg_mask(struct af9033_state *state, u32 reg, u8 val,
-		u8 mask)
-{
-	int ret;
-	u8 tmp;
-
-	/* no need for read if whole reg is written */
-	if (mask != 0xff) {
-		ret = af9033_rd_regs(state, reg, &tmp, 1);
-		if (ret)
-			return ret;
-
-		val &= mask;
-		tmp &= ~mask;
-		val |= tmp;
-	}
-
-	return af9033_wr_regs(state, reg, &val, 1);
-}
-
-/* read single register with mask */
-static int af9033_rd_reg_mask(struct af9033_state *state, u32 reg, u8 *val,
-		u8 mask)
-{
-	int ret, i;
-	u8 tmp;
-
-	ret = af9033_rd_regs(state, reg, &tmp, 1);
-	if (ret)
-		return ret;
-
-	tmp &= mask;
-
-	/* find position of the first bit */
-	for (i = 0; i < 8; i++) {
-		if ((mask >> i) & 0x01)
-			break;
-	}
-	*val = tmp >> i;
-
-	return 0;
-}
-
-static u32 af9033_div(u32 a, u32 b, u32 x)
-{
-	u32 r = 0, c = 0, i;
-
-	pr_debug("%s: a=%d b=%d x=%d\n", __func__, a, b, x);
-
-	if (a > b) {
-		c = a / b;
-		a = a - c * b;
-	}
-
-	for (i = 0; i < x; i++) {
-		if (a >= b) {
-			r += 1;
-			a -= b;
-		}
-		a <<= 1;
-		r <<= 1;
-	}
-	r = (c << (u32)x) + r;
-
-	pr_debug("%s: a=%d b=%d x=%d r=%d r=%x\n", __func__, a, b, x, r, r);
-
-	return r;
-}
-
-static void af9033_release(struct dvb_frontend *fe)
-{
-	struct af9033_state *state = fe->demodulator_priv;
-
-	kfree(state);
-}
-
-static int af9033_init(struct dvb_frontend *fe)
-{
-	struct af9033_state *state = fe->demodulator_priv;
-	int ret, i, len;
-	const struct reg_val *init;
-	u8 buf[4];
-	u32 adc_cw, clock_cw;
-	struct reg_val_mask tab[] = {
-		{ 0x80fb24, 0x00, 0x08 },
-		{ 0x80004c, 0x00, 0xff },
-		{ 0x00f641, state->cfg.tuner, 0xff },
-		{ 0x80f5ca, 0x01, 0x01 },
-		{ 0x80f715, 0x01, 0x01 },
-		{ 0x00f41f, 0x04, 0x04 },
-		{ 0x00f41a, 0x01, 0x01 },
-		{ 0x80f731, 0x00, 0x01 },
-		{ 0x00d91e, 0x00, 0x01 },
-		{ 0x00d919, 0x00, 0x01 },
-		{ 0x80f732, 0x00, 0x01 },
-		{ 0x00d91f, 0x00, 0x01 },
-		{ 0x00d91a, 0x00, 0x01 },
-		{ 0x80f730, 0x00, 0x01 },
-		{ 0x80f778, 0x00, 0xff },
-		{ 0x80f73c, 0x01, 0x01 },
-		{ 0x80f776, 0x00, 0x01 },
-		{ 0x00d8fd, 0x01, 0xff },
-		{ 0x00d830, 0x01, 0xff },
-		{ 0x00d831, 0x00, 0xff },
-		{ 0x00d832, 0x00, 0xff },
-		{ 0x80f985, state->ts_mode_serial, 0x01 },
-		{ 0x80f986, state->ts_mode_parallel, 0x01 },
-		{ 0x00d827, 0x00, 0xff },
-		{ 0x00d829, 0x00, 0xff },
-	};
-
-	/* program clock control */
-	clock_cw = af9033_div(state->cfg.clock, 1000000ul, 19ul);
-	buf[0] = (clock_cw >>  0) & 0xff;
-	buf[1] = (clock_cw >>  8) & 0xff;
-	buf[2] = (clock_cw >> 16) & 0xff;
-	buf[3] = (clock_cw >> 24) & 0xff;
-
-	pr_debug("%s: clock=%d clock_cw=%08x\n", __func__, state->cfg.clock,
-			clock_cw);
-
-	ret = af9033_wr_regs(state, 0x800025, buf, 4);
-	if (ret < 0)
-		goto err;
-
-	/* program ADC control */
-	for (i = 0; i < ARRAY_SIZE(clock_adc_lut); i++) {
-		if (clock_adc_lut[i].clock == state->cfg.clock)
-			break;
-	}
-
-	adc_cw = af9033_div(clock_adc_lut[i].adc, 1000000ul, 19ul);
-	buf[0] = (adc_cw >>  0) & 0xff;
-	buf[1] = (adc_cw >>  8) & 0xff;
-	buf[2] = (adc_cw >> 16) & 0xff;
-
-	pr_debug("%s: adc=%d adc_cw=%06x\n", __func__, clock_adc_lut[i].adc,
-			adc_cw);
-
-	ret = af9033_wr_regs(state, 0x80f1cd, buf, 3);
-	if (ret < 0)
-		goto err;
-
-	/* program register table */
-	for (i = 0; i < ARRAY_SIZE(tab); i++) {
-		ret = af9033_wr_reg_mask(state, tab[i].reg, tab[i].val,
-				tab[i].mask);
-		if (ret < 0)
-			goto err;
-	}
-
-	/* settings for TS interface */
-	if (state->cfg.ts_mode == AF9033_TS_MODE_USB) {
-		ret = af9033_wr_reg_mask(state, 0x80f9a5, 0x00, 0x01);
-		if (ret < 0)
-			goto err;
-
-		ret = af9033_wr_reg_mask(state, 0x80f9b5, 0x01, 0x01);
-		if (ret < 0)
-			goto err;
-	} else {
-		ret = af9033_wr_reg_mask(state, 0x80f990, 0x00, 0x01);
-		if (ret < 0)
-			goto err;
-
-		ret = af9033_wr_reg_mask(state, 0x80f9b5, 0x00, 0x01);
-		if (ret < 0)
-			goto err;
-	}
-
-	/* load OFSM settings */
-	pr_debug("%s: load ofsm settings\n", __func__);
-	len = ARRAY_SIZE(ofsm_init);
-	init = ofsm_init;
-	for (i = 0; i < len; i++) {
-		ret = af9033_wr_reg(state, init[i].reg, init[i].val);
-		if (ret < 0)
-			goto err;
-	}
-
-	/* load tuner specific settings */
-	pr_debug("%s: load tuner specific settings\n",
-			__func__);
-	switch (state->cfg.tuner) {
-	case AF9033_TUNER_TUA9001:
-		len = ARRAY_SIZE(tuner_init_tua9001);
-		init = tuner_init_tua9001;
-		break;
-	case AF9033_TUNER_FC0011:
-		len = ARRAY_SIZE(tuner_init_fc0011);
-		init = tuner_init_fc0011;
-		break;
-	case AF9033_TUNER_MXL5007T:
-		len = ARRAY_SIZE(tuner_init_mxl5007t);
-		init = tuner_init_mxl5007t;
-		break;
-	case AF9033_TUNER_TDA18218:
-		len = ARRAY_SIZE(tuner_init_tda18218);
-		init = tuner_init_tda18218;
-		break;
-	default:
-		pr_debug("%s: unsupported tuner ID=%d\n", __func__,
-				state->cfg.tuner);
-		ret = -ENODEV;
-		goto err;
-	}
-
-	for (i = 0; i < len; i++) {
-		ret = af9033_wr_reg(state, init[i].reg, init[i].val);
-		if (ret < 0)
-			goto err;
-	}
-
-	state->bandwidth_hz = 0; /* force to program all parameters */
-
-	return 0;
-
-err:
-	pr_debug("%s: failed=%d\n", __func__, ret);
-
-	return ret;
-}
-
-static int af9033_sleep(struct dvb_frontend *fe)
-{
-	struct af9033_state *state = fe->demodulator_priv;
-	int ret, i;
-	u8 tmp;
-
-	ret = af9033_wr_reg(state, 0x80004c, 1);
-	if (ret < 0)
-		goto err;
-
-	ret = af9033_wr_reg(state, 0x800000, 0);
-	if (ret < 0)
-		goto err;
-
-	for (i = 100, tmp = 1; i && tmp; i--) {
-		ret = af9033_rd_reg(state, 0x80004c, &tmp);
-		if (ret < 0)
-			goto err;
-
-		usleep_range(200, 10000);
-	}
-
-	pr_debug("%s: loop=%d\n", __func__, i);
-
-	if (i == 0) {
-		ret = -ETIMEDOUT;
-		goto err;
-	}
-
-	ret = af9033_wr_reg_mask(state, 0x80fb24, 0x08, 0x08);
-	if (ret < 0)
-		goto err;
-
-	/* prevent current leak (?) */
-	if (state->cfg.ts_mode == AF9033_TS_MODE_SERIAL) {
-		/* enable parallel TS */
-		ret = af9033_wr_reg_mask(state, 0x00d917, 0x00, 0x01);
-		if (ret < 0)
-			goto err;
-
-		ret = af9033_wr_reg_mask(state, 0x00d916, 0x01, 0x01);
-		if (ret < 0)
-			goto err;
-	}
-
-	return 0;
-
-err:
-	pr_debug("%s: failed=%d\n", __func__, ret);
-
-	return ret;
-}
-
-static int af9033_get_tune_settings(struct dvb_frontend *fe,
-		struct dvb_frontend_tune_settings *fesettings)
-{
-	fesettings->min_delay_ms = 800;
-	fesettings->step_size = 0;
-	fesettings->max_drift = 0;
-
-	return 0;
-}
-
-static int af9033_set_frontend(struct dvb_frontend *fe)
-{
-	struct af9033_state *state = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	int ret, i, spec_inv;
-	u8 tmp, buf[3], bandwidth_reg_val;
-	u32 if_frequency, freq_cw, adc_freq;
-
-	pr_debug("%s: frequency=%d bandwidth_hz=%d\n", __func__, c->frequency,
-			c->bandwidth_hz);
-
-	/* check bandwidth */
-	switch (c->bandwidth_hz) {
-	case 6000000:
-		bandwidth_reg_val = 0x00;
-		break;
-	case 7000000:
-		bandwidth_reg_val = 0x01;
-		break;
-	case 8000000:
-		bandwidth_reg_val = 0x02;
-		break;
-	default:
-		pr_debug("%s: invalid bandwidth_hz\n", __func__);
-		ret = -EINVAL;
-		goto err;
-	}
-
-	/* program tuner */
-	if (fe->ops.tuner_ops.set_params)
-		fe->ops.tuner_ops.set_params(fe);
-
-	/* program CFOE coefficients */
-	if (c->bandwidth_hz != state->bandwidth_hz) {
-		for (i = 0; i < ARRAY_SIZE(coeff_lut); i++) {
-			if (coeff_lut[i].clock == state->cfg.clock &&
-				coeff_lut[i].bandwidth_hz == c->bandwidth_hz) {
-				break;
-			}
-		}
-		ret =  af9033_wr_regs(state, 0x800001,
-				coeff_lut[i].val, sizeof(coeff_lut[i].val));
-	}
-
-	/* program frequency control */
-	if (c->bandwidth_hz != state->bandwidth_hz) {
-		spec_inv = state->cfg.spec_inv ? -1 : 1;
-
-		for (i = 0; i < ARRAY_SIZE(clock_adc_lut); i++) {
-			if (clock_adc_lut[i].clock == state->cfg.clock)
-				break;
-		}
-		adc_freq = clock_adc_lut[i].adc;
-
-		/* get used IF frequency */
-		if (fe->ops.tuner_ops.get_if_frequency)
-			fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency);
-		else
-			if_frequency = 0;
-
-		while (if_frequency > (adc_freq / 2))
-			if_frequency -= adc_freq;
-
-		if (if_frequency >= 0)
-			spec_inv *= -1;
-		else
-			if_frequency *= -1;
-
-		freq_cw = af9033_div(if_frequency, adc_freq, 23ul);
-
-		if (spec_inv == -1)
-			freq_cw *= -1;
-
-		/* get adc multiplies */
-		ret = af9033_rd_reg(state, 0x800045, &tmp);
-		if (ret < 0)
-			goto err;
-
-		if (tmp == 1)
-			freq_cw /= 2;
-
-		buf[0] = (freq_cw >>  0) & 0xff;
-		buf[1] = (freq_cw >>  8) & 0xff;
-		buf[2] = (freq_cw >> 16) & 0x7f;
-		ret = af9033_wr_regs(state, 0x800029, buf, 3);
-		if (ret < 0)
-			goto err;
-
-		state->bandwidth_hz = c->bandwidth_hz;
-	}
-
-	ret = af9033_wr_reg_mask(state, 0x80f904, bandwidth_reg_val, 0x03);
-	if (ret < 0)
-		goto err;
-
-	ret = af9033_wr_reg(state, 0x800040, 0x00);
-	if (ret < 0)
-		goto err;
-
-	ret = af9033_wr_reg(state, 0x800047, 0x00);
-	if (ret < 0)
-		goto err;
-
-	ret = af9033_wr_reg_mask(state, 0x80f999, 0x00, 0x01);
-	if (ret < 0)
-		goto err;
-
-	if (c->frequency <= 230000000)
-		tmp = 0x00; /* VHF */
-	else
-		tmp = 0x01; /* UHF */
-
-	ret = af9033_wr_reg(state, 0x80004b, tmp);
-	if (ret < 0)
-		goto err;
-
-	ret = af9033_wr_reg(state, 0x800000, 0x00);
-	if (ret < 0)
-		goto err;
-
-	return 0;
-
-err:
-	pr_debug("%s: failed=%d\n", __func__, ret);
-
-	return ret;
-}
-
-static int af9033_get_frontend(struct dvb_frontend *fe)
-{
-	struct af9033_state *state = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	int ret;
-	u8 buf[8];
-
-	pr_debug("%s\n", __func__);
-
-	/* read all needed registers */
-	ret = af9033_rd_regs(state, 0x80f900, buf, sizeof(buf));
-	if (ret < 0)
-		goto err;
-
-	switch ((buf[0] >> 0) & 3) {
-	case 0:
-		c->transmission_mode = TRANSMISSION_MODE_2K;
-		break;
-	case 1:
-		c->transmission_mode = TRANSMISSION_MODE_8K;
-		break;
-	}
-
-	switch ((buf[1] >> 0) & 3) {
-	case 0:
-		c->guard_interval = GUARD_INTERVAL_1_32;
-		break;
-	case 1:
-		c->guard_interval = GUARD_INTERVAL_1_16;
-		break;
-	case 2:
-		c->guard_interval = GUARD_INTERVAL_1_8;
-		break;
-	case 3:
-		c->guard_interval = GUARD_INTERVAL_1_4;
-		break;
-	}
-
-	switch ((buf[2] >> 0) & 7) {
-	case 0:
-		c->hierarchy = HIERARCHY_NONE;
-		break;
-	case 1:
-		c->hierarchy = HIERARCHY_1;
-		break;
-	case 2:
-		c->hierarchy = HIERARCHY_2;
-		break;
-	case 3:
-		c->hierarchy = HIERARCHY_4;
-		break;
-	}
-
-	switch ((buf[3] >> 0) & 3) {
-	case 0:
-		c->modulation = QPSK;
-		break;
-	case 1:
-		c->modulation = QAM_16;
-		break;
-	case 2:
-		c->modulation = QAM_64;
-		break;
-	}
-
-	switch ((buf[4] >> 0) & 3) {
-	case 0:
-		c->bandwidth_hz = 6000000;
-		break;
-	case 1:
-		c->bandwidth_hz = 7000000;
-		break;
-	case 2:
-		c->bandwidth_hz = 8000000;
-		break;
-	}
-
-	switch ((buf[6] >> 0) & 7) {
-	case 0:
-		c->code_rate_HP = FEC_1_2;
-		break;
-	case 1:
-		c->code_rate_HP = FEC_2_3;
-		break;
-	case 2:
-		c->code_rate_HP = FEC_3_4;
-		break;
-	case 3:
-		c->code_rate_HP = FEC_5_6;
-		break;
-	case 4:
-		c->code_rate_HP = FEC_7_8;
-		break;
-	case 5:
-		c->code_rate_HP = FEC_NONE;
-		break;
-	}
-
-	switch ((buf[7] >> 0) & 7) {
-	case 0:
-		c->code_rate_LP = FEC_1_2;
-		break;
-	case 1:
-		c->code_rate_LP = FEC_2_3;
-		break;
-	case 2:
-		c->code_rate_LP = FEC_3_4;
-		break;
-	case 3:
-		c->code_rate_LP = FEC_5_6;
-		break;
-	case 4:
-		c->code_rate_LP = FEC_7_8;
-		break;
-	case 5:
-		c->code_rate_LP = FEC_NONE;
-		break;
-	}
-
-	return 0;
-
-err:
-	pr_debug("%s: failed=%d\n", __func__, ret);
-
-	return ret;
-}
-
-static int af9033_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct af9033_state *state = fe->demodulator_priv;
-	int ret;
-	u8 tmp;
-
-	*status = 0;
-
-	/* radio channel status, 0=no result, 1=has signal, 2=no signal */
-	ret = af9033_rd_reg(state, 0x800047, &tmp);
-	if (ret < 0)
-		goto err;
-
-	/* has signal */
-	if (tmp == 0x01)
-		*status |= FE_HAS_SIGNAL;
-
-	if (tmp != 0x02) {
-		/* TPS lock */
-		ret = af9033_rd_reg_mask(state, 0x80f5a9, &tmp, 0x01);
-		if (ret < 0)
-			goto err;
-
-		if (tmp)
-			*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
-					FE_HAS_VITERBI;
-
-		/* full lock */
-		ret = af9033_rd_reg_mask(state, 0x80f999, &tmp, 0x01);
-		if (ret < 0)
-			goto err;
-
-		if (tmp)
-			*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
-					FE_HAS_VITERBI | FE_HAS_SYNC |
-					FE_HAS_LOCK;
-	}
-
-	return 0;
-
-err:
-	pr_debug("%s: failed=%d\n", __func__, ret);
-
-	return ret;
-}
-
-static int af9033_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct af9033_state *state = fe->demodulator_priv;
-	int ret, i, len;
-	u8 buf[3], tmp;
-	u32 snr_val;
-	const struct val_snr *uninitialized_var(snr_lut);
-
-	/* read value */
-	ret = af9033_rd_regs(state, 0x80002c, buf, 3);
-	if (ret < 0)
-		goto err;
-
-	snr_val = (buf[2] << 16) | (buf[1] << 8) | buf[0];
-
-	/* read current modulation */
-	ret = af9033_rd_reg(state, 0x80f903, &tmp);
-	if (ret < 0)
-		goto err;
-
-	switch ((tmp >> 0) & 3) {
-	case 0:
-		len = ARRAY_SIZE(qpsk_snr_lut);
-		snr_lut = qpsk_snr_lut;
-		break;
-	case 1:
-		len = ARRAY_SIZE(qam16_snr_lut);
-		snr_lut = qam16_snr_lut;
-		break;
-	case 2:
-		len = ARRAY_SIZE(qam64_snr_lut);
-		snr_lut = qam64_snr_lut;
-		break;
-	default:
-		goto err;
-	}
-
-	for (i = 0; i < len; i++) {
-		tmp = snr_lut[i].snr;
-
-		if (snr_val < snr_lut[i].val)
-			break;
-	}
-
-	*snr = tmp * 10; /* dB/10 */
-
-	return 0;
-
-err:
-	pr_debug("%s: failed=%d\n", __func__, ret);
-
-	return ret;
-}
-
-static int af9033_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	struct af9033_state *state = fe->demodulator_priv;
-	int ret;
-	u8 strength2;
-
-	/* read signal strength of 0-100 scale */
-	ret = af9033_rd_reg(state, 0x800048, &strength2);
-	if (ret < 0)
-		goto err;
-
-	/* scale value to 0x0000-0xffff */
-	*strength = strength2 * 0xffff / 100;
-
-	return 0;
-
-err:
-	pr_debug("%s: failed=%d\n", __func__, ret);
-
-	return ret;
-}
-
-static int af9033_update_ch_stat(struct af9033_state *state)
-{
-	int ret = 0;
-	u32 err_cnt, bit_cnt;
-	u16 abort_cnt;
-	u8 buf[7];
-
-	/* only update data every half second */
-	if (time_after(jiffies, state->last_stat_check + msecs_to_jiffies(500))) {
-		ret = af9033_rd_regs(state, 0x800032, buf, sizeof(buf));
-		if (ret < 0)
-			goto err;
-		/* in 8 byte packets? */
-		abort_cnt = (buf[1] << 8) + buf[0];
-		/* in bits */
-		err_cnt = (buf[4] << 16) + (buf[3] << 8) + buf[2];
-		/* in 8 byte packets? always(?) 0x2710 = 10000 */
-		bit_cnt = (buf[6] << 8) + buf[5];
-
-		if (bit_cnt < abort_cnt) {
-			abort_cnt = 1000;
-			state->ber = 0xffffffff;
-		} else {
-			/* 8 byte packets, that have not been rejected already */
-			bit_cnt -= (u32)abort_cnt;
-			if (bit_cnt == 0) {
-				state->ber = 0xffffffff;
-			} else {
-				err_cnt -= (u32)abort_cnt * 8 * 8;
-				bit_cnt *= 8 * 8;
-				state->ber = err_cnt * (0xffffffff / bit_cnt);
-			}
-		}
-		state->ucb += abort_cnt;
-		state->last_stat_check = jiffies;
-	}
-
-	return 0;
-err:
-	pr_debug("%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int af9033_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct af9033_state *state = fe->demodulator_priv;
-	int ret;
-
-	ret = af9033_update_ch_stat(state);
-	if (ret < 0)
-		return ret;
-
-	*ber = state->ber;
-
-	return 0;
-}
-
-static int af9033_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	struct af9033_state *state = fe->demodulator_priv;
-	int ret;
-
-	ret = af9033_update_ch_stat(state);
-	if (ret < 0)
-		return ret;
-
-	*ucblocks = state->ucb;
-
-	return 0;
-}
-
-static int af9033_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct af9033_state *state = fe->demodulator_priv;
-	int ret;
-
-	pr_debug("%s: enable=%d\n", __func__, enable);
-
-	ret = af9033_wr_reg_mask(state, 0x00fa04, enable, 0x01);
-	if (ret < 0)
-		goto err;
-
-	return 0;
-
-err:
-	pr_debug("%s: failed=%d\n", __func__, ret);
-
-	return ret;
-}
-
-static struct dvb_frontend_ops af9033_ops;
-
-struct dvb_frontend *af9033_attach(const struct af9033_config *config,
-		struct i2c_adapter *i2c)
-{
-	int ret;
-	struct af9033_state *state;
-	u8 buf[8];
-
-	pr_debug("%s:\n", __func__);
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct af9033_state), GFP_KERNEL);
-	if (state == NULL)
-		goto err;
-
-	/* setup the state */
-	state->i2c = i2c;
-	memcpy(&state->cfg, config, sizeof(struct af9033_config));
-
-	if (state->cfg.clock != 12000000) {
-		printk(KERN_INFO "af9033: unsupported clock=%d, only " \
-				"12000000 Hz is supported currently\n",
-				state->cfg.clock);
-		goto err;
-	}
-
-	/* firmware version */
-	ret = af9033_rd_regs(state, 0x0083e9, &buf[0], 4);
-	if (ret < 0)
-		goto err;
-
-	ret = af9033_rd_regs(state, 0x804191, &buf[4], 4);
-	if (ret < 0)
-		goto err;
-
-	printk(KERN_INFO "af9033: firmware version: LINK=%d.%d.%d.%d " \
-			"OFDM=%d.%d.%d.%d\n", buf[0], buf[1], buf[2], buf[3],
-			buf[4], buf[5], buf[6], buf[7]);
-
-	/* configure internal TS mode */
-	switch (state->cfg.ts_mode) {
-	case AF9033_TS_MODE_PARALLEL:
-		state->ts_mode_parallel = true;
-		break;
-	case AF9033_TS_MODE_SERIAL:
-		state->ts_mode_serial = true;
-		break;
-	case AF9033_TS_MODE_USB:
-		/* usb mode for AF9035 */
-	default:
-		break;
-	}
-
-	/* create dvb_frontend */
-	memcpy(&state->fe.ops, &af9033_ops, sizeof(struct dvb_frontend_ops));
-	state->fe.demodulator_priv = state;
-
-	return &state->fe;
-
-err:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(af9033_attach);
-
-static struct dvb_frontend_ops af9033_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name = "Afatech AF9033 (DVB-T)",
-		.frequency_min = 174000000,
-		.frequency_max = 862000000,
-		.frequency_stepsize = 250000,
-		.frequency_tolerance = 0,
-		.caps =	FE_CAN_FEC_1_2 |
-			FE_CAN_FEC_2_3 |
-			FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 |
-			FE_CAN_FEC_7_8 |
-			FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK |
-			FE_CAN_QAM_16 |
-			FE_CAN_QAM_64 |
-			FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO |
-			FE_CAN_GUARD_INTERVAL_AUTO |
-			FE_CAN_HIERARCHY_AUTO |
-			FE_CAN_RECOVER |
-			FE_CAN_MUTE_TS
-	},
-
-	.release = af9033_release,
-
-	.init = af9033_init,
-	.sleep = af9033_sleep,
-
-	.get_tune_settings = af9033_get_tune_settings,
-	.set_frontend = af9033_set_frontend,
-	.get_frontend = af9033_get_frontend,
-
-	.read_status = af9033_read_status,
-	.read_snr = af9033_read_snr,
-	.read_signal_strength = af9033_read_signal_strength,
-	.read_ber = af9033_read_ber,
-	.read_ucblocks = af9033_read_ucblocks,
-
-	.i2c_gate_ctrl = af9033_i2c_gate_ctrl,
-};
-
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_DESCRIPTION("Afatech AF9033 DVB-T demodulator driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/af9033.h b/drivers/media/dvb/frontends/af9033.h
deleted file mode 100644
index 9e302c3..0000000
--- a/drivers/media/dvb/frontends/af9033.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Afatech AF9033 demodulator driver
- *
- * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
- * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef AF9033_H
-#define AF9033_H
-
-struct af9033_config {
-	/*
-	 * I2C address
-	 */
-	u8 i2c_addr;
-
-	/*
-	 * clock Hz
-	 * 12000000, 22000000, 24000000, 34000000, 32000000, 28000000, 26000000,
-	 * 30000000, 36000000, 20480000, 16384000
-	 */
-	u32 clock;
-
-	/*
-	 * tuner
-	 */
-#define AF9033_TUNER_TUA9001     0x27 /* Infineon TUA 9001 */
-#define AF9033_TUNER_FC0011      0x28 /* Fitipower FC0011 */
-#define AF9033_TUNER_MXL5007T    0xa0 /* MaxLinear MxL5007T */
-#define AF9033_TUNER_TDA18218    0xa1 /* NXP TDA 18218HN */
-	u8 tuner;
-
-	/*
-	 * TS settings
-	 */
-#define AF9033_TS_MODE_USB       0
-#define AF9033_TS_MODE_PARALLEL  1
-#define AF9033_TS_MODE_SERIAL    2
-	u8 ts_mode:2;
-
-	/*
-	 * input spectrum inversion
-	 */
-	bool spec_inv;
-};
-
-
-#if defined(CONFIG_DVB_AF9033) || \
-	(defined(CONFIG_DVB_AF9033_MODULE) && defined(MODULE))
-extern struct dvb_frontend *af9033_attach(const struct af9033_config *config,
-	struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *af9033_attach(
-	const struct af9033_config *config, struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif /* AF9033_H */
diff --git a/drivers/media/dvb/frontends/af9033_priv.h b/drivers/media/dvb/frontends/af9033_priv.h
deleted file mode 100644
index 0b783b9..0000000
--- a/drivers/media/dvb/frontends/af9033_priv.h
+++ /dev/null
@@ -1,470 +0,0 @@
-/*
- * Afatech AF9033 demodulator driver
- *
- * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
- * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef AF9033_PRIV_H
-#define AF9033_PRIV_H
-
-#include "dvb_frontend.h"
-#include "af9033.h"
-
-struct reg_val {
-	u32 reg;
-	u8  val;
-};
-
-struct reg_val_mask {
-	u32 reg;
-	u8  val;
-	u8  mask;
-};
-
-struct coeff {
-	u32 clock;
-	u32 bandwidth_hz;
-	u8 val[36];
-};
-
-struct clock_adc {
-	u32 clock;
-	u32 adc;
-};
-
-struct val_snr {
-	u32 val;
-	u8 snr;
-};
-
-/* Xtal clock vs. ADC clock lookup table */
-static const struct clock_adc clock_adc_lut[] = {
-	{ 16384000, 20480000 },
-	{ 20480000, 20480000 },
-	{ 36000000, 20250000 },
-	{ 30000000, 20156250 },
-	{ 26000000, 20583333 },
-	{ 28000000, 20416667 },
-	{ 32000000, 20500000 },
-	{ 34000000, 20187500 },
-	{ 24000000, 20500000 },
-	{ 22000000, 20625000 },
-	{ 12000000, 20250000 },
-};
-
-/* pre-calculated coeff lookup table */
-static const struct coeff coeff_lut[] = {
-	/* 12.000 MHz */
-	{ 12000000, 8000000, {
-		0x01, 0xce, 0x55, 0xc9, 0x00, 0xe7, 0x2a, 0xe4, 0x00, 0x73,
-		0x99, 0x0f, 0x00, 0x73, 0x95, 0x72, 0x00, 0x73, 0x91, 0xd5,
-		0x00, 0x39, 0xca, 0xb9, 0x00, 0xe7, 0x2a, 0xe4, 0x00, 0x73,
-		0x95, 0x72, 0x37, 0x02, 0xce, 0x01 }
-	},
-	{ 12000000, 7000000, {
-		0x01, 0x94, 0x8b, 0x10, 0x00, 0xca, 0x45, 0x88, 0x00, 0x65,
-		0x25, 0xed, 0x00, 0x65, 0x22, 0xc4, 0x00, 0x65, 0x1f, 0x9b,
-		0x00, 0x32, 0x91, 0x62, 0x00, 0xca, 0x45, 0x88, 0x00, 0x65,
-		0x22, 0xc4, 0x88, 0x02, 0x95, 0x01 }
-	},
-	{ 12000000, 6000000, {
-		0x01, 0x5a, 0xc0, 0x56, 0x00, 0xad, 0x60, 0x2b, 0x00, 0x56,
-		0xb2, 0xcb, 0x00, 0x56, 0xb0, 0x15, 0x00, 0x56, 0xad, 0x60,
-		0x00, 0x2b, 0x58, 0x0b, 0x00, 0xad, 0x60, 0x2b, 0x00, 0x56,
-		0xb0, 0x15, 0xf4, 0x02, 0x5b, 0x01 }
-	},
-};
-
-/* QPSK SNR lookup table */
-static const struct val_snr qpsk_snr_lut[] = {
-	{ 0x0b4771,  0 },
-	{ 0x0c1aed,  1 },
-	{ 0x0d0d27,  2 },
-	{ 0x0e4d19,  3 },
-	{ 0x0e5da8,  4 },
-	{ 0x107097,  5 },
-	{ 0x116975,  6 },
-	{ 0x1252d9,  7 },
-	{ 0x131fa4,  8 },
-	{ 0x13d5e1,  9 },
-	{ 0x148e53, 10 },
-	{ 0x15358b, 11 },
-	{ 0x15dd29, 12 },
-	{ 0x168112, 13 },
-	{ 0x170b61, 14 },
-	{ 0x17a532, 15 },
-	{ 0x180f94, 16 },
-	{ 0x186ed2, 17 },
-	{ 0x18b271, 18 },
-	{ 0x18e118, 19 },
-	{ 0x18ff4b, 20 },
-	{ 0x190af1, 21 },
-	{ 0x191451, 22 },
-	{ 0xffffff, 23 },
-};
-
-/* QAM16 SNR lookup table */
-static const struct val_snr qam16_snr_lut[] = {
-	{ 0x04f0d5,  0 },
-	{ 0x05387a,  1 },
-	{ 0x0573a4,  2 },
-	{ 0x05a99e,  3 },
-	{ 0x05cc80,  4 },
-	{ 0x05eb62,  5 },
-	{ 0x05fecf,  6 },
-	{ 0x060b80,  7 },
-	{ 0x062501,  8 },
-	{ 0x064865,  9 },
-	{ 0x069604, 10 },
-	{ 0x06f356, 11 },
-	{ 0x07706a, 12 },
-	{ 0x0804d3, 13 },
-	{ 0x089d1a, 14 },
-	{ 0x093e3d, 15 },
-	{ 0x09e35d, 16 },
-	{ 0x0a7c3c, 17 },
-	{ 0x0afaf8, 18 },
-	{ 0x0b719d, 19 },
-	{ 0x0bda6a, 20 },
-	{ 0x0c0c75, 21 },
-	{ 0x0c3f7d, 22 },
-	{ 0x0c5e62, 23 },
-	{ 0x0c6c31, 24 },
-	{ 0x0c7925, 25 },
-	{ 0xffffff, 26 },
-};
-
-/* QAM64 SNR lookup table */
-static const struct val_snr qam64_snr_lut[] = {
-	{ 0x0256d0,  0 },
-	{ 0x027a65,  1 },
-	{ 0x029873,  2 },
-	{ 0x02b7fe,  3 },
-	{ 0x02cf1e,  4 },
-	{ 0x02e234,  5 },
-	{ 0x02f409,  6 },
-	{ 0x030046,  7 },
-	{ 0x030844,  8 },
-	{ 0x030a02,  9 },
-	{ 0x030cde, 10 },
-	{ 0x031031, 11 },
-	{ 0x03144c, 12 },
-	{ 0x0315dd, 13 },
-	{ 0x031920, 14 },
-	{ 0x0322d0, 15 },
-	{ 0x0339fc, 16 },
-	{ 0x0364a1, 17 },
-	{ 0x038bcc, 18 },
-	{ 0x03c7d3, 19 },
-	{ 0x0408cc, 20 },
-	{ 0x043bed, 21 },
-	{ 0x048061, 22 },
-	{ 0x04be95, 23 },
-	{ 0x04fa7d, 24 },
-	{ 0x052405, 25 },
-	{ 0x05570d, 26 },
-	{ 0x059feb, 27 },
-	{ 0x05bf38, 28 },
-	{ 0xffffff, 29 },
-};
-
-static const struct reg_val ofsm_init[] = {
-	{ 0x800051, 0x01 },
-	{ 0x800070, 0x0a },
-	{ 0x80007e, 0x04 },
-	{ 0x800081, 0x0a },
-	{ 0x80008a, 0x01 },
-	{ 0x80008e, 0x01 },
-	{ 0x800092, 0x06 },
-	{ 0x800099, 0x01 },
-	{ 0x80009f, 0xe1 },
-	{ 0x8000a0, 0xcf },
-	{ 0x8000a3, 0x01 },
-	{ 0x8000a5, 0x01 },
-	{ 0x8000a6, 0x01 },
-	{ 0x8000a9, 0x00 },
-	{ 0x8000aa, 0x01 },
-	{ 0x8000ab, 0x01 },
-	{ 0x8000b0, 0x01 },
-	{ 0x8000c0, 0x05 },
-	{ 0x8000c4, 0x19 },
-	{ 0x80f000, 0x0f },
-	{ 0x80f016, 0x10 },
-	{ 0x80f017, 0x04 },
-	{ 0x80f018, 0x05 },
-	{ 0x80f019, 0x04 },
-	{ 0x80f01a, 0x05 },
-	{ 0x80f021, 0x03 },
-	{ 0x80f022, 0x0a },
-	{ 0x80f023, 0x0a },
-	{ 0x80f02b, 0x00 },
-	{ 0x80f02c, 0x01 },
-	{ 0x80f064, 0x03 },
-	{ 0x80f065, 0xf9 },
-	{ 0x80f066, 0x03 },
-	{ 0x80f067, 0x01 },
-	{ 0x80f06f, 0xe0 },
-	{ 0x80f070, 0x03 },
-	{ 0x80f072, 0x0f },
-	{ 0x80f073, 0x03 },
-	{ 0x80f078, 0x00 },
-	{ 0x80f087, 0x00 },
-	{ 0x80f09b, 0x3f },
-	{ 0x80f09c, 0x00 },
-	{ 0x80f09d, 0x20 },
-	{ 0x80f09e, 0x00 },
-	{ 0x80f09f, 0x0c },
-	{ 0x80f0a0, 0x00 },
-	{ 0x80f130, 0x04 },
-	{ 0x80f132, 0x04 },
-	{ 0x80f144, 0x1a },
-	{ 0x80f146, 0x00 },
-	{ 0x80f14a, 0x01 },
-	{ 0x80f14c, 0x00 },
-	{ 0x80f14d, 0x00 },
-	{ 0x80f14f, 0x04 },
-	{ 0x80f158, 0x7f },
-	{ 0x80f15a, 0x00 },
-	{ 0x80f15b, 0x08 },
-	{ 0x80f15d, 0x03 },
-	{ 0x80f15e, 0x05 },
-	{ 0x80f163, 0x05 },
-	{ 0x80f166, 0x01 },
-	{ 0x80f167, 0x40 },
-	{ 0x80f168, 0x0f },
-	{ 0x80f17a, 0x00 },
-	{ 0x80f17b, 0x00 },
-	{ 0x80f183, 0x01 },
-	{ 0x80f19d, 0x40 },
-	{ 0x80f1bc, 0x36 },
-	{ 0x80f1bd, 0x00 },
-	{ 0x80f1cb, 0xa0 },
-	{ 0x80f1cc, 0x01 },
-	{ 0x80f204, 0x10 },
-	{ 0x80f214, 0x00 },
-	{ 0x80f40e, 0x0a },
-	{ 0x80f40f, 0x40 },
-	{ 0x80f410, 0x08 },
-	{ 0x80f55f, 0x0a },
-	{ 0x80f561, 0x15 },
-	{ 0x80f562, 0x20 },
-	{ 0x80f5df, 0xfb },
-	{ 0x80f5e0, 0x00 },
-	{ 0x80f5e3, 0x09 },
-	{ 0x80f5e4, 0x01 },
-	{ 0x80f5e5, 0x01 },
-	{ 0x80f5f8, 0x01 },
-	{ 0x80f5fd, 0x01 },
-	{ 0x80f600, 0x05 },
-	{ 0x80f601, 0x08 },
-	{ 0x80f602, 0x0b },
-	{ 0x80f603, 0x0e },
-	{ 0x80f604, 0x11 },
-	{ 0x80f605, 0x14 },
-	{ 0x80f606, 0x17 },
-	{ 0x80f607, 0x1f },
-	{ 0x80f60e, 0x00 },
-	{ 0x80f60f, 0x04 },
-	{ 0x80f610, 0x32 },
-	{ 0x80f611, 0x10 },
-	{ 0x80f707, 0xfc },
-	{ 0x80f708, 0x00 },
-	{ 0x80f709, 0x37 },
-	{ 0x80f70a, 0x00 },
-	{ 0x80f78b, 0x01 },
-	{ 0x80f80f, 0x40 },
-	{ 0x80f810, 0x54 },
-	{ 0x80f811, 0x5a },
-	{ 0x80f905, 0x01 },
-	{ 0x80fb06, 0x03 },
-	{ 0x80fd8b, 0x00 },
-};
-
-/* Infineon TUA 9001 tuner init
-   AF9033_TUNER_TUA9001    = 0x27 */
-static const struct reg_val tuner_init_tua9001[] = {
-	{ 0x800046, 0x27 },
-	{ 0x800057, 0x00 },
-	{ 0x800058, 0x01 },
-	{ 0x80005f, 0x00 },
-	{ 0x800060, 0x00 },
-	{ 0x80006d, 0x00 },
-	{ 0x800071, 0x05 },
-	{ 0x800072, 0x02 },
-	{ 0x800074, 0x01 },
-	{ 0x800075, 0x03 },
-	{ 0x800076, 0x02 },
-	{ 0x800077, 0x00 },
-	{ 0x800078, 0x01 },
-	{ 0x800079, 0x00 },
-	{ 0x80007a, 0x7e },
-	{ 0x80007b, 0x3e },
-	{ 0x800093, 0x00 },
-	{ 0x800094, 0x01 },
-	{ 0x800095, 0x02 },
-	{ 0x800096, 0x01 },
-	{ 0x800098, 0x0a },
-	{ 0x80009b, 0x05 },
-	{ 0x80009c, 0x80 },
-	{ 0x8000b3, 0x00 },
-	{ 0x8000c1, 0x01 },
-	{ 0x8000c2, 0x00 },
-	{ 0x80f007, 0x00 },
-	{ 0x80f01f, 0x82 },
-	{ 0x80f020, 0x00 },
-	{ 0x80f029, 0x82 },
-	{ 0x80f02a, 0x00 },
-	{ 0x80f047, 0x00 },
-	{ 0x80f054, 0x00 },
-	{ 0x80f055, 0x00 },
-	{ 0x80f077, 0x01 },
-	{ 0x80f1e6, 0x00 },
-};
-
-/* Fitipower fc0011 tuner init
-   AF9033_TUNER_FC0011    = 0x28 */
-static const struct reg_val tuner_init_fc0011[] = {
-	{ 0x800046, AF9033_TUNER_FC0011 },
-	{ 0x800057, 0x00 },
-	{ 0x800058, 0x01 },
-	{ 0x80005f, 0x00 },
-	{ 0x800060, 0x00 },
-	{ 0x800068, 0xa5 },
-	{ 0x80006e, 0x01 },
-	{ 0x800071, 0x0A },
-	{ 0x800072, 0x02 },
-	{ 0x800074, 0x01 },
-	{ 0x800079, 0x01 },
-	{ 0x800093, 0x00 },
-	{ 0x800094, 0x00 },
-	{ 0x800095, 0x00 },
-	{ 0x800096, 0x00 },
-	{ 0x80009b, 0x2D },
-	{ 0x80009c, 0x60 },
-	{ 0x80009d, 0x23 },
-	{ 0x8000a4, 0x50 },
-	{ 0x8000ad, 0x50 },
-	{ 0x8000b3, 0x01 },
-	{ 0x8000b7, 0x88 },
-	{ 0x8000b8, 0xa6 },
-	{ 0x8000c3, 0x01 },
-	{ 0x8000c4, 0x01 },
-	{ 0x8000c7, 0x69 },
-	{ 0x80F007, 0x00 },
-	{ 0x80F00A, 0x1B },
-	{ 0x80F00B, 0x1B },
-	{ 0x80F00C, 0x1B },
-	{ 0x80F00D, 0x1B },
-	{ 0x80F00E, 0xFF },
-	{ 0x80F00F, 0x01 },
-	{ 0x80F010, 0x00 },
-	{ 0x80F011, 0x02 },
-	{ 0x80F012, 0xFF },
-	{ 0x80F013, 0x01 },
-	{ 0x80F014, 0x00 },
-	{ 0x80F015, 0x02 },
-	{ 0x80F01B, 0xEF },
-	{ 0x80F01C, 0x01 },
-	{ 0x80F01D, 0x0f },
-	{ 0x80F01E, 0x02 },
-	{ 0x80F01F, 0x6E },
-	{ 0x80F020, 0x00 },
-	{ 0x80F025, 0xDE },
-	{ 0x80F026, 0x00 },
-	{ 0x80F027, 0x0A },
-	{ 0x80F028, 0x03 },
-	{ 0x80F029, 0x6E },
-	{ 0x80F02A, 0x00 },
-	{ 0x80F047, 0x00 },
-	{ 0x80F054, 0x00 },
-	{ 0x80F055, 0x00 },
-	{ 0x80F077, 0x01 },
-	{ 0x80F1E6, 0x00 },
-};
-
-/* MaxLinear MxL5007T tuner init
-   AF9033_TUNER_MXL5007T    = 0xa0 */
-static const struct reg_val tuner_init_mxl5007t[] = {
-	{ 0x800046, 0x1b },
-	{ 0x800057, 0x01 },
-	{ 0x800058, 0x01 },
-	{ 0x80005f, 0x00 },
-	{ 0x800060, 0x00 },
-	{ 0x800068, 0x96 },
-	{ 0x800071, 0x05 },
-	{ 0x800072, 0x02 },
-	{ 0x800074, 0x01 },
-	{ 0x800079, 0x01 },
-	{ 0x800093, 0x00 },
-	{ 0x800094, 0x00 },
-	{ 0x800095, 0x00 },
-	{ 0x800096, 0x00 },
-	{ 0x8000b3, 0x01 },
-	{ 0x8000c1, 0x01 },
-	{ 0x8000c2, 0x00 },
-	{ 0x80f007, 0x00 },
-	{ 0x80f00c, 0x19 },
-	{ 0x80f00d, 0x1a },
-	{ 0x80f012, 0xda },
-	{ 0x80f013, 0x00 },
-	{ 0x80f014, 0x00 },
-	{ 0x80f015, 0x02 },
-	{ 0x80f01f, 0x82 },
-	{ 0x80f020, 0x00 },
-	{ 0x80f029, 0x82 },
-	{ 0x80f02a, 0x00 },
-	{ 0x80f077, 0x02 },
-	{ 0x80f1e6, 0x00 },
-};
-
-/* NXP TDA 18218HN tuner init
-   AF9033_TUNER_TDA18218    = 0xa1 */
-static const struct reg_val tuner_init_tda18218[] = {
-	{0x800046, 0xa1},
-	{0x800057, 0x01},
-	{0x800058, 0x01},
-	{0x80005f, 0x00},
-	{0x800060, 0x00},
-	{0x800071, 0x05},
-	{0x800072, 0x02},
-	{0x800074, 0x01},
-	{0x800079, 0x01},
-	{0x800093, 0x00},
-	{0x800094, 0x00},
-	{0x800095, 0x00},
-	{0x800096, 0x00},
-	{0x8000b3, 0x01},
-	{0x8000c3, 0x01},
-	{0x8000c4, 0x00},
-	{0x80f007, 0x00},
-	{0x80f00c, 0x19},
-	{0x80f00d, 0x1a},
-	{0x80f012, 0xda},
-	{0x80f013, 0x00},
-	{0x80f014, 0x00},
-	{0x80f015, 0x02},
-	{0x80f01f, 0x82},
-	{0x80f020, 0x00},
-	{0x80f029, 0x82},
-	{0x80f02a, 0x00},
-	{0x80f077, 0x02},
-	{0x80f1e6, 0x00},
-};
-
-#endif /* AF9033_PRIV_H */
-
diff --git a/drivers/media/dvb/frontends/atbm8830.c b/drivers/media/dvb/frontends/atbm8830.c
deleted file mode 100644
index a2261ea..0000000
--- a/drivers/media/dvb/frontends/atbm8830.c
+++ /dev/null
@@ -1,508 +0,0 @@
-/*
- *    Support for AltoBeam GB20600 (a.k.a DMB-TH) demodulator
- *    ATBM8830, ATBM8831
- *
- *    Copyright (C) 2009 David T.L. Wong <davidtlwong@gmail.com>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/div64.h>
-#include "dvb_frontend.h"
-
-#include "atbm8830.h"
-#include "atbm8830_priv.h"
-
-#define dprintk(args...) \
-	do { \
-		if (debug) \
-			printk(KERN_DEBUG "atbm8830: " args); \
-	} while (0)
-
-static int debug;
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-static int atbm8830_write_reg(struct atbm_state *priv, u16 reg, u8 data)
-{
-	int ret = 0;
-	u8 dev_addr;
-	u8 buf1[] = { reg >> 8, reg & 0xFF };
-	u8 buf2[] = { data };
-	struct i2c_msg msg1 = { .flags = 0, .buf = buf1, .len = 2 };
-	struct i2c_msg msg2 = { .flags = 0, .buf = buf2, .len = 1 };
-
-	dev_addr = priv->config->demod_address;
-	msg1.addr = dev_addr;
-	msg2.addr = dev_addr;
-
-	if (debug >= 2)
-		dprintk("%s: reg=0x%04X, data=0x%02X\n", __func__, reg, data);
-
-	ret = i2c_transfer(priv->i2c, &msg1, 1);
-	if (ret != 1)
-		return -EIO;
-
-	ret = i2c_transfer(priv->i2c, &msg2, 1);
-	return (ret != 1) ? -EIO : 0;
-}
-
-static int atbm8830_read_reg(struct atbm_state *priv, u16 reg, u8 *p_data)
-{
-	int ret;
-	u8 dev_addr;
-
-	u8 buf1[] = { reg >> 8, reg & 0xFF };
-	u8 buf2[] = { 0 };
-	struct i2c_msg msg1 = { .flags = 0, .buf = buf1, .len = 2 };
-	struct i2c_msg msg2 = { .flags = I2C_M_RD, .buf = buf2, .len = 1 };
-
-	dev_addr = priv->config->demod_address;
-	msg1.addr = dev_addr;
-	msg2.addr = dev_addr;
-
-	ret = i2c_transfer(priv->i2c, &msg1, 1);
-	if (ret != 1) {
-		dprintk("%s: error reg=0x%04x, ret=%i\n", __func__, reg, ret);
-		return -EIO;
-	}
-
-	ret = i2c_transfer(priv->i2c, &msg2, 1);
-	if (ret != 1)
-		return -EIO;
-
-	*p_data = buf2[0];
-	if (debug >= 2)
-		dprintk("%s: reg=0x%04X, data=0x%02X\n",
-			__func__, reg, buf2[0]);
-
-	return 0;
-}
-
-/* Lock register latch so that multi-register read is atomic */
-static inline int atbm8830_reglatch_lock(struct atbm_state *priv, int lock)
-{
-	return atbm8830_write_reg(priv, REG_READ_LATCH, lock ? 1 : 0);
-}
-
-static int set_osc_freq(struct atbm_state *priv, u32 freq /*in kHz*/)
-{
-	u32 val;
-	u64 t;
-
-	/* 0x100000 * freq / 30.4MHz */
-	t = (u64)0x100000 * freq;
-	do_div(t, 30400);
-	val = t;
-
-	atbm8830_write_reg(priv, REG_OSC_CLK, val);
-	atbm8830_write_reg(priv, REG_OSC_CLK + 1, val >> 8);
-	atbm8830_write_reg(priv, REG_OSC_CLK + 2, val >> 16);
-
-	return 0;
-}
-
-static int set_if_freq(struct atbm_state *priv, u32 freq /*in kHz*/)
-{
-
-	u32 fs = priv->config->osc_clk_freq;
-	u64 t;
-	u32 val;
-	u8 dat;
-
-	if (freq != 0) {
-		/* 2 * PI * (freq - fs) / fs * (2 ^ 22) */
-		t = (u64) 2 * 31416 * (freq - fs);
-		t <<= 22;
-		do_div(t, fs);
-		do_div(t, 1000);
-		val = t;
-
-		atbm8830_write_reg(priv, REG_TUNER_BASEBAND, 1);
-		atbm8830_write_reg(priv, REG_IF_FREQ, val);
-		atbm8830_write_reg(priv, REG_IF_FREQ+1, val >> 8);
-		atbm8830_write_reg(priv, REG_IF_FREQ+2, val >> 16);
-
-		atbm8830_read_reg(priv, REG_ADC_CONFIG, &dat);
-		dat &= 0xFC;
-		atbm8830_write_reg(priv, REG_ADC_CONFIG, dat);
-	} else {
-		/* Zero IF */
-		atbm8830_write_reg(priv, REG_TUNER_BASEBAND, 0);
-
-		atbm8830_read_reg(priv, REG_ADC_CONFIG, &dat);
-		dat &= 0xFC;
-		dat |= 0x02;
-		atbm8830_write_reg(priv, REG_ADC_CONFIG, dat);
-
-		if (priv->config->zif_swap_iq)
-			atbm8830_write_reg(priv, REG_SWAP_I_Q, 0x03);
-		else
-			atbm8830_write_reg(priv, REG_SWAP_I_Q, 0x01);
-	}
-
-	return 0;
-}
-
-static int is_locked(struct atbm_state *priv, u8 *locked)
-{
-	u8 status;
-
-	atbm8830_read_reg(priv, REG_LOCK_STATUS, &status);
-
-	if (locked != NULL)
-		*locked = (status == 1);
-	return 0;
-}
-
-static int set_agc_config(struct atbm_state *priv,
-	u8 min, u8 max, u8 hold_loop)
-{
-	/* no effect if both min and max are zero */
-	if (!min && !max)
-	    return 0;
-
-	atbm8830_write_reg(priv, REG_AGC_MIN, min);
-	atbm8830_write_reg(priv, REG_AGC_MAX, max);
-	atbm8830_write_reg(priv, REG_AGC_HOLD_LOOP, hold_loop);
-
-	return 0;
-}
-
-static int set_static_channel_mode(struct atbm_state *priv)
-{
-	int i;
-
-	for (i = 0; i < 5; i++)
-		atbm8830_write_reg(priv, 0x099B + i, 0x08);
-
-	atbm8830_write_reg(priv, 0x095B, 0x7F);
-	atbm8830_write_reg(priv, 0x09CB, 0x01);
-	atbm8830_write_reg(priv, 0x09CC, 0x7F);
-	atbm8830_write_reg(priv, 0x09CD, 0x7F);
-	atbm8830_write_reg(priv, 0x0E01, 0x20);
-
-	/* For single carrier */
-	atbm8830_write_reg(priv, 0x0B03, 0x0A);
-	atbm8830_write_reg(priv, 0x0935, 0x10);
-	atbm8830_write_reg(priv, 0x0936, 0x08);
-	atbm8830_write_reg(priv, 0x093E, 0x08);
-	atbm8830_write_reg(priv, 0x096E, 0x06);
-
-	/* frame_count_max0 */
-	atbm8830_write_reg(priv, 0x0B09, 0x00);
-	/* frame_count_max1 */
-	atbm8830_write_reg(priv, 0x0B0A, 0x08);
-
-	return 0;
-}
-
-static int set_ts_config(struct atbm_state *priv)
-{
-	const struct atbm8830_config *cfg = priv->config;
-
-	/*Set parallel/serial ts mode*/
-	atbm8830_write_reg(priv, REG_TS_SERIAL, cfg->serial_ts ? 1 : 0);
-	atbm8830_write_reg(priv, REG_TS_CLK_MODE, cfg->serial_ts ? 1 : 0);
-	/*Set ts sampling edge*/
-	atbm8830_write_reg(priv, REG_TS_SAMPLE_EDGE,
-		cfg->ts_sampling_edge ? 1 : 0);
-	/*Set ts clock freerun*/
-	atbm8830_write_reg(priv, REG_TS_CLK_FREERUN,
-		cfg->ts_clk_gated ? 0 : 1);
-
-	return 0;
-}
-
-static int atbm8830_init(struct dvb_frontend *fe)
-{
-	struct atbm_state *priv = fe->demodulator_priv;
-	const struct atbm8830_config *cfg = priv->config;
-
-	/*Set oscillator frequency*/
-	set_osc_freq(priv, cfg->osc_clk_freq);
-
-	/*Set IF frequency*/
-	set_if_freq(priv, cfg->if_freq);
-
-	/*Set AGC Config*/
-	set_agc_config(priv, cfg->agc_min, cfg->agc_max,
-		cfg->agc_hold_loop);
-
-	/*Set static channel mode*/
-	set_static_channel_mode(priv);
-
-	set_ts_config(priv);
-	/*Turn off DSP reset*/
-	atbm8830_write_reg(priv, 0x000A, 0);
-
-	/*SW version test*/
-	atbm8830_write_reg(priv, 0x020C, 11);
-
-	/* Run */
-	atbm8830_write_reg(priv, REG_DEMOD_RUN, 1);
-
-	return 0;
-}
-
-
-static void atbm8830_release(struct dvb_frontend *fe)
-{
-	struct atbm_state *state = fe->demodulator_priv;
-	dprintk("%s\n", __func__);
-
-	kfree(state);
-}
-
-static int atbm8830_set_fe(struct dvb_frontend *fe)
-{
-	struct atbm_state *priv = fe->demodulator_priv;
-	int i;
-	u8 locked = 0;
-	dprintk("%s\n", __func__);
-
-	/* set frequency */
-	if (fe->ops.tuner_ops.set_params) {
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 1);
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	/* start auto lock */
-	for (i = 0; i < 10; i++) {
-		mdelay(100);
-		dprintk("Try %d\n", i);
-		is_locked(priv, &locked);
-		if (locked != 0) {
-			dprintk("ATBM8830 locked!\n");
-			break;
-		}
-	}
-
-	return 0;
-}
-
-static int atbm8830_get_fe(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	dprintk("%s\n", __func__);
-
-	/* TODO: get real readings from device */
-	/* inversion status */
-	c->inversion = INVERSION_OFF;
-
-	/* bandwidth */
-	c->bandwidth_hz = 8000000;
-
-	c->code_rate_HP = FEC_AUTO;
-	c->code_rate_LP = FEC_AUTO;
-
-	c->modulation = QAM_AUTO;
-
-	/* transmission mode */
-	c->transmission_mode = TRANSMISSION_MODE_AUTO;
-
-	/* guard interval */
-	c->guard_interval = GUARD_INTERVAL_AUTO;
-
-	/* hierarchy */
-	c->hierarchy = HIERARCHY_NONE;
-
-	return 0;
-}
-
-static int atbm8830_get_tune_settings(struct dvb_frontend *fe,
-	struct dvb_frontend_tune_settings *fesettings)
-{
-	fesettings->min_delay_ms = 0;
-	fesettings->step_size = 0;
-	fesettings->max_drift = 0;
-	return 0;
-}
-
-static int atbm8830_read_status(struct dvb_frontend *fe, fe_status_t *fe_status)
-{
-	struct atbm_state *priv = fe->demodulator_priv;
-	u8 locked = 0;
-	u8 agc_locked = 0;
-
-	dprintk("%s\n", __func__);
-	*fe_status = 0;
-
-	is_locked(priv, &locked);
-	if (locked) {
-		*fe_status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
-			FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
-	}
-	dprintk("%s: fe_status=0x%x\n", __func__, *fe_status);
-
-	atbm8830_read_reg(priv, REG_AGC_LOCK, &agc_locked);
-	dprintk("AGC Lock: %d\n", agc_locked);
-
-	return 0;
-}
-
-static int atbm8830_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct atbm_state *priv = fe->demodulator_priv;
-	u32 frame_err;
-	u8 t;
-
-	dprintk("%s\n", __func__);
-
-	atbm8830_reglatch_lock(priv, 1);
-
-	atbm8830_read_reg(priv, REG_FRAME_ERR_CNT + 1, &t);
-	frame_err = t & 0x7F;
-	frame_err <<= 8;
-	atbm8830_read_reg(priv, REG_FRAME_ERR_CNT, &t);
-	frame_err |= t;
-
-	atbm8830_reglatch_lock(priv, 0);
-
-	*ber = frame_err * 100 / 32767;
-
-	dprintk("%s: ber=0x%x\n", __func__, *ber);
-	return 0;
-}
-
-static int atbm8830_read_signal_strength(struct dvb_frontend *fe, u16 *signal)
-{
-	struct atbm_state *priv = fe->demodulator_priv;
-	u32 pwm;
-	u8 t;
-
-	dprintk("%s\n", __func__);
-	atbm8830_reglatch_lock(priv, 1);
-
-	atbm8830_read_reg(priv, REG_AGC_PWM_VAL + 1, &t);
-	pwm = t & 0x03;
-	pwm <<= 8;
-	atbm8830_read_reg(priv, REG_AGC_PWM_VAL, &t);
-	pwm |= t;
-
-	atbm8830_reglatch_lock(priv, 0);
-
-	dprintk("AGC PWM = 0x%02X\n", pwm);
-	pwm = 0x400 - pwm;
-
-	*signal = pwm * 0x10000 / 0x400;
-
-	return 0;
-}
-
-static int atbm8830_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	dprintk("%s\n", __func__);
-	*snr = 0;
-	return 0;
-}
-
-static int atbm8830_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	dprintk("%s\n", __func__);
-	*ucblocks = 0;
-	return 0;
-}
-
-static int atbm8830_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct atbm_state *priv = fe->demodulator_priv;
-
-	return atbm8830_write_reg(priv, REG_I2C_GATE, enable ? 1 : 0);
-}
-
-static struct dvb_frontend_ops atbm8830_ops = {
-	.delsys = { SYS_DMBTH },
-	.info = {
-		.name = "AltoBeam ATBM8830/8831 DMB-TH",
-		.frequency_min = 474000000,
-		.frequency_max = 858000000,
-		.frequency_stepsize = 10000,
-		.caps =
-			FE_CAN_FEC_AUTO |
-			FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO |
-			FE_CAN_GUARD_INTERVAL_AUTO
-	},
-
-	.release = atbm8830_release,
-
-	.init = atbm8830_init,
-	.sleep = NULL,
-	.write = NULL,
-	.i2c_gate_ctrl = atbm8830_i2c_gate_ctrl,
-
-	.set_frontend = atbm8830_set_fe,
-	.get_frontend = atbm8830_get_fe,
-	.get_tune_settings = atbm8830_get_tune_settings,
-
-	.read_status = atbm8830_read_status,
-	.read_ber = atbm8830_read_ber,
-	.read_signal_strength = atbm8830_read_signal_strength,
-	.read_snr = atbm8830_read_snr,
-	.read_ucblocks = atbm8830_read_ucblocks,
-};
-
-struct dvb_frontend *atbm8830_attach(const struct atbm8830_config *config,
-	struct i2c_adapter *i2c)
-{
-	struct atbm_state *priv = NULL;
-	u8 data = 0;
-
-	dprintk("%s()\n", __func__);
-
-	if (config == NULL || i2c == NULL)
-		return NULL;
-
-	priv = kzalloc(sizeof(struct atbm_state), GFP_KERNEL);
-	if (priv == NULL)
-		goto error_out;
-
-	priv->config = config;
-	priv->i2c = i2c;
-
-	/* check if the demod is there */
-	if (atbm8830_read_reg(priv, REG_CHIP_ID, &data) != 0) {
-		dprintk("%s atbm8830/8831 not found at i2c addr 0x%02X\n",
-			__func__, priv->config->demod_address);
-		goto error_out;
-	}
-	dprintk("atbm8830 chip id: 0x%02X\n", data);
-
-	memcpy(&priv->frontend.ops, &atbm8830_ops,
-	       sizeof(struct dvb_frontend_ops));
-	priv->frontend.demodulator_priv = priv;
-
-	atbm8830_init(&priv->frontend);
-
-	atbm8830_i2c_gate_ctrl(&priv->frontend, 1);
-
-	return &priv->frontend;
-
-error_out:
-	dprintk("%s() error_out\n", __func__);
-	kfree(priv);
-	return NULL;
-
-}
-EXPORT_SYMBOL(atbm8830_attach);
-
-MODULE_DESCRIPTION("AltoBeam ATBM8830/8831 GB20600 demodulator driver");
-MODULE_AUTHOR("David T. L. Wong <davidtlwong@gmail.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/atbm8830.h b/drivers/media/dvb/frontends/atbm8830.h
deleted file mode 100644
index 0242733..0000000
--- a/drivers/media/dvb/frontends/atbm8830.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- *    Support for AltoBeam GB20600 (a.k.a DMB-TH) demodulator
- *    ATBM8830, ATBM8831
- *
- *    Copyright (C) 2009 David T.L. Wong <davidtlwong@gmail.com>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ATBM8830_H__
-#define __ATBM8830_H__
-
-#include <linux/dvb/frontend.h>
-#include <linux/i2c.h>
-
-#define ATBM8830_PROD_8830 0
-#define ATBM8830_PROD_8831 1
-
-struct atbm8830_config {
-
-	/* product type */
-	u8 prod;
-
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* parallel or serial transport stream */
-	u8 serial_ts;
-
-	/* transport stream clock output only when receiving valid stream */
-	u8 ts_clk_gated;
-
-	/* Decoder sample TS data at rising edge of clock */
-	u8 ts_sampling_edge;
-
-	/* Oscillator clock frequency */
-	u32 osc_clk_freq; /* in kHz */
-
-	/* IF frequency */
-	u32 if_freq; /* in kHz */
-
-	/* Swap I/Q for zero IF */
-	u8 zif_swap_iq;
-
-	/* Tuner AGC settings */
-	u8 agc_min;
-	u8 agc_max;
-	u8 agc_hold_loop;
-};
-
-#if defined(CONFIG_DVB_ATBM8830) || \
-	(defined(CONFIG_DVB_ATBM8830_MODULE) && defined(MODULE))
-extern struct dvb_frontend *atbm8830_attach(const struct atbm8830_config *config,
-		struct i2c_adapter *i2c);
-#else
-static inline
-struct dvb_frontend *atbm8830_attach(const struct atbm8830_config *config,
-		struct i2c_adapter *i2c) {
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_ATBM8830 */
-
-#endif /* __ATBM8830_H__ */
diff --git a/drivers/media/dvb/frontends/atbm8830_priv.h b/drivers/media/dvb/frontends/atbm8830_priv.h
deleted file mode 100644
index d460058..0000000
--- a/drivers/media/dvb/frontends/atbm8830_priv.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- *    Support for AltoBeam GB20600 (a.k.a DMB-TH) demodulator
- *    ATBM8830, ATBM8831
- *
- *    Copyright (C) 2009 David T.L. Wong <davidtlwong@gmail.com>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ATBM8830_PRIV_H
-#define __ATBM8830_PRIV_H
-
-struct atbm_state {
-	struct i2c_adapter *i2c;
-	/* configuration settings */
-	const struct atbm8830_config *config;
-	struct dvb_frontend frontend;
-};
-
-#define REG_CHIP_ID	0x0000
-#define REG_TUNER_BASEBAND	0x0001
-#define REG_DEMOD_RUN	0x0004
-#define REG_DSP_RESET	0x0005
-#define REG_RAM_RESET	0x0006
-#define REG_ADC_RESET	0x0007
-#define REG_TSPORT_RESET	0x0008
-#define REG_BLKERR_POL	0x000C
-#define REG_I2C_GATE	0x0103
-#define REG_TS_SAMPLE_EDGE	0x0301
-#define REG_TS_PKT_LEN_204	0x0302
-#define REG_TS_PKT_LEN_AUTO	0x0303
-#define REG_TS_SERIAL	0x0305
-#define REG_TS_CLK_FREERUN	0x0306
-#define REG_TS_VALID_MODE	0x0307
-#define REG_TS_CLK_MODE	0x030B /* 1 for serial, 0 for parallel */
-
-#define REG_TS_ERRBIT_USE	0x030C
-#define REG_LOCK_STATUS	0x030D
-#define REG_ADC_CONFIG	0x0602
-#define REG_CARRIER_OFFSET	0x0827 /* 0x0827-0x0829 little endian */
-#define REG_DETECTED_PN_MODE	0x082D
-#define REG_READ_LATCH	0x084D
-#define REG_IF_FREQ	0x0A00 /* 0x0A00-0x0A02 little endian */
-#define REG_OSC_CLK	0x0A03 /* 0x0A03-0x0A05 little endian */
-#define REG_BYPASS_CCI	0x0A06
-#define REG_ANALOG_LUMA_DETECTED	0x0A25
-#define REG_ANALOG_AUDIO_DETECTED	0x0A26
-#define REG_ANALOG_CHROMA_DETECTED	0x0A39
-#define REG_FRAME_ERR_CNT	0x0B04
-#define REG_USE_EXT_ADC	0x0C00
-#define REG_SWAP_I_Q	0x0C01
-#define REG_TPS_MANUAL	0x0D01
-#define REG_TPS_CONFIG	0x0D02
-#define REG_BYPASS_DEINTERLEAVER	0x0E00
-#define REG_AGC_TARGET	0x1003 /* 0x1003-0x1005 little endian */
-#define REG_AGC_MIN	0x1020
-#define REG_AGC_MAX	0x1023
-#define REG_AGC_LOCK	0x1027
-#define REG_AGC_PWM_VAL	0x1028 /* 0x1028-0x1029 little endian */
-#define REG_AGC_HOLD_LOOP	0x1031
-
-#endif
-
diff --git a/drivers/media/dvb/frontends/au8522.h b/drivers/media/dvb/frontends/au8522.h
deleted file mode 100644
index 565dcf3..0000000
--- a/drivers/media/dvb/frontends/au8522.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
-    Auvitek AU8522 QAM/8VSB demodulator driver
-
-    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef __AU8522_H__
-#define __AU8522_H__
-
-#include <linux/dvb/frontend.h>
-
-enum au8522_if_freq {
-	AU8522_IF_6MHZ = 0,
-	AU8522_IF_4MHZ,
-	AU8522_IF_3_25MHZ,
-};
-
-struct au8522_led_config {
-	u16 vsb8_strong;
-	u16 qam64_strong;
-	u16 qam256_strong;
-
-	u16 gpio_output;
-	/* unset hi bits, set low bits */
-	u16 gpio_output_enable;
-	u16 gpio_output_disable;
-
-	u16 gpio_leds;
-	u8 *led_states;
-	unsigned int num_led_states;
-};
-
-struct au8522_config {
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* Return lock status based on tuner lock, or demod lock */
-#define AU8522_TUNERLOCKING 0
-#define AU8522_DEMODLOCKING 1
-	u8 status_mode;
-
-	struct au8522_led_config *led_cfg;
-
-	enum au8522_if_freq vsb_if;
-	enum au8522_if_freq qam_if;
-};
-
-#if defined(CONFIG_DVB_AU8522) || 				\
-	    (defined(CONFIG_DVB_AU8522_MODULE) && defined(MODULE))
-extern struct dvb_frontend *au8522_attach(const struct au8522_config *config,
-					  struct i2c_adapter *i2c);
-#else
-static inline
-struct dvb_frontend *au8522_attach(const struct au8522_config *config,
-				   struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_AU8522 */
-
-/* Other modes may need to be added later */
-enum au8522_video_input {
-	AU8522_COMPOSITE_CH1 = 1,
-	AU8522_COMPOSITE_CH2,
-	AU8522_COMPOSITE_CH3,
-	AU8522_COMPOSITE_CH4,
-	AU8522_COMPOSITE_CH4_SIF,
-	AU8522_SVIDEO_CH13,
-	AU8522_SVIDEO_CH24,
-};
-
-enum au8522_audio_input {
-	AU8522_AUDIO_NONE,
-	AU8522_AUDIO_SIF,
-};
-
-#endif /* __AU8522_H__ */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- */
diff --git a/drivers/media/dvb/frontends/au8522_common.c b/drivers/media/dvb/frontends/au8522_common.c
deleted file mode 100644
index 5cfe151..0000000
--- a/drivers/media/dvb/frontends/au8522_common.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
-    Auvitek AU8522 QAM/8VSB demodulator driver
-
-    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
-    Copyright (C) 2008 Devin Heitmueller <dheitmueller@linuxtv.org>
-    Copyright (C) 2005-2008 Auvitek International, Ltd.
-    Copyright (C) 2012 Michael Krufky <mkrufky@linuxtv.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-#include "au8522_priv.h"
-
-MODULE_LICENSE("GPL");
-
-static int debug;
-
-#define dprintk(arg...)\
-  do { if (debug)\
-	 printk(arg);\
-  } while (0)
-
-/* Despite the name "hybrid_tuner", the framework works just as well for
-   hybrid demodulators as well... */
-static LIST_HEAD(hybrid_tuner_instance_list);
-static DEFINE_MUTEX(au8522_list_mutex);
-
-/* 16 bit registers, 8 bit values */
-int au8522_writereg(struct au8522_state *state, u16 reg, u8 data)
-{
-	int ret;
-	u8 buf[] = { (reg >> 8) | 0x80, reg & 0xff, data };
-
-	struct i2c_msg msg = { .addr = state->config->demod_address,
-			       .flags = 0, .buf = buf, .len = 3 };
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-
-	if (ret != 1)
-		printk("%s: writereg error (reg == 0x%02x, val == 0x%04x, "
-		       "ret == %i)\n", __func__, reg, data, ret);
-
-	return (ret != 1) ? -1 : 0;
-}
-EXPORT_SYMBOL(au8522_writereg);
-
-u8 au8522_readreg(struct au8522_state *state, u16 reg)
-{
-	int ret;
-	u8 b0[] = { (reg >> 8) | 0x40, reg & 0xff };
-	u8 b1[] = { 0 };
-
-	struct i2c_msg msg[] = {
-		{ .addr = state->config->demod_address, .flags = 0,
-		  .buf = b0, .len = 2 },
-		{ .addr = state->config->demod_address, .flags = I2C_M_RD,
-		  .buf = b1, .len = 1 } };
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2)
-		printk(KERN_ERR "%s: readreg error (ret == %i)\n",
-		       __func__, ret);
-	return b1[0];
-}
-EXPORT_SYMBOL(au8522_readreg);
-
-int au8522_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct au8522_state *state = fe->demodulator_priv;
-
-	dprintk("%s(%d)\n", __func__, enable);
-
-	if (state->operational_mode == AU8522_ANALOG_MODE) {
-		/* We're being asked to manage the gate even though we're
-		   not in digital mode.  This can occur if we get switched
-		   over to analog mode before the dvb_frontend kernel thread
-		   has completely shutdown */
-		return 0;
-	}
-
-	if (enable)
-		return au8522_writereg(state, 0x106, 1);
-	else
-		return au8522_writereg(state, 0x106, 0);
-}
-EXPORT_SYMBOL(au8522_i2c_gate_ctrl);
-
-/* Reset the demod hardware and reset all of the configuration registers
-   to a default state. */
-int au8522_get_state(struct au8522_state **state, struct i2c_adapter *i2c,
-		     u8 client_address)
-{
-	int ret;
-
-	mutex_lock(&au8522_list_mutex);
-	ret = hybrid_tuner_request_state(struct au8522_state, (*state),
-					 hybrid_tuner_instance_list,
-					 i2c, client_address, "au8522");
-	mutex_unlock(&au8522_list_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL(au8522_get_state);
-
-void au8522_release_state(struct au8522_state *state)
-{
-	mutex_lock(&au8522_list_mutex);
-	if (state != NULL)
-		hybrid_tuner_release_state(state);
-	mutex_unlock(&au8522_list_mutex);
-}
-EXPORT_SYMBOL(au8522_release_state);
-
-static int au8522_led_gpio_enable(struct au8522_state *state, int onoff)
-{
-	struct au8522_led_config *led_config = state->config->led_cfg;
-	u8 val;
-
-	/* bail out if we can't control an LED */
-	if (!led_config || !led_config->gpio_output ||
-	    !led_config->gpio_output_enable || !led_config->gpio_output_disable)
-		return 0;
-
-	val = au8522_readreg(state, 0x4000 |
-			     (led_config->gpio_output & ~0xc000));
-	if (onoff) {
-		/* enable GPIO output */
-		val &= ~((led_config->gpio_output_enable >> 8) & 0xff);
-		val |=  (led_config->gpio_output_enable & 0xff);
-	} else {
-		/* disable GPIO output */
-		val &= ~((led_config->gpio_output_disable >> 8) & 0xff);
-		val |=  (led_config->gpio_output_disable & 0xff);
-	}
-	return au8522_writereg(state, 0x8000 |
-			       (led_config->gpio_output & ~0xc000), val);
-}
-
-/* led = 0 | off
- * led = 1 | signal ok
- * led = 2 | signal strong
- * led < 0 | only light led if leds are currently off
- */
-int au8522_led_ctrl(struct au8522_state *state, int led)
-{
-	struct au8522_led_config *led_config = state->config->led_cfg;
-	int i, ret = 0;
-
-	/* bail out if we can't control an LED */
-	if (!led_config || !led_config->gpio_leds ||
-	    !led_config->num_led_states || !led_config->led_states)
-		return 0;
-
-	if (led < 0) {
-		/* if LED is already lit, then leave it as-is */
-		if (state->led_state)
-			return 0;
-		else
-			led *= -1;
-	}
-
-	/* toggle LED if changing state */
-	if (state->led_state != led) {
-		u8 val;
-
-		dprintk("%s: %d\n", __func__, led);
-
-		au8522_led_gpio_enable(state, 1);
-
-		val = au8522_readreg(state, 0x4000 |
-				     (led_config->gpio_leds & ~0xc000));
-
-		/* start with all leds off */
-		for (i = 0; i < led_config->num_led_states; i++)
-			val &= ~led_config->led_states[i];
-
-		/* set selected LED state */
-		if (led < led_config->num_led_states)
-			val |= led_config->led_states[led];
-		else if (led_config->num_led_states)
-			val |=
-			led_config->led_states[led_config->num_led_states - 1];
-
-		ret = au8522_writereg(state, 0x8000 |
-				      (led_config->gpio_leds & ~0xc000), val);
-		if (ret < 0)
-			return ret;
-
-		state->led_state = led;
-
-		if (led == 0)
-			au8522_led_gpio_enable(state, 0);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(au8522_led_ctrl);
-
-int au8522_init(struct dvb_frontend *fe)
-{
-	struct au8522_state *state = fe->demodulator_priv;
-	dprintk("%s()\n", __func__);
-
-	state->operational_mode = AU8522_DIGITAL_MODE;
-
-	/* Clear out any state associated with the digital side of the
-	   chip, so that when it gets powered back up it won't think
-	   that it is already tuned */
-	state->current_frequency = 0;
-
-	au8522_writereg(state, 0xa4, 1 << 5);
-
-	au8522_i2c_gate_ctrl(fe, 1);
-
-	return 0;
-}
-EXPORT_SYMBOL(au8522_init);
-
-int au8522_sleep(struct dvb_frontend *fe)
-{
-	struct au8522_state *state = fe->demodulator_priv;
-	dprintk("%s()\n", __func__);
-
-	/* Only power down if the digital side is currently using the chip */
-	if (state->operational_mode == AU8522_ANALOG_MODE) {
-		/* We're not in one of the expected power modes, which means
-		   that the DVB thread is probably telling us to go to sleep
-		   even though the analog frontend has already started using
-		   the chip.  So ignore the request */
-		return 0;
-	}
-
-	/* turn off led */
-	au8522_led_ctrl(state, 0);
-
-	/* Power down the chip */
-	au8522_writereg(state, 0xa4, 1 << 5);
-
-	state->current_frequency = 0;
-
-	return 0;
-}
-EXPORT_SYMBOL(au8522_sleep);
diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c
deleted file mode 100644
index 55b6390..0000000
--- a/drivers/media/dvb/frontends/au8522_decoder.c
+++ /dev/null
@@ -1,842 +0,0 @@
-/*
- * Auvitek AU8522 QAM/8VSB demodulator driver and video decoder
- *
- * Copyright (C) 2009 Devin Heitmueller <dheitmueller@linuxtv.org>
- * Copyright (C) 2005-2008 Auvitek International, Ltd.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * As published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-/* Developer notes:
- *
- * VBI support is not yet working
- * Enough is implemented here for CVBS and S-Video inputs, but the actual
- *  analog demodulator code isn't implemented (not needed for xc5000 since it
- *  has its own demodulator and outputs CVBS)
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/videodev2.h>
-#include <linux/i2c.h>
-#include <linux/delay.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-device.h>
-#include "au8522.h"
-#include "au8522_priv.h"
-
-MODULE_AUTHOR("Devin Heitmueller");
-MODULE_LICENSE("GPL");
-
-static int au8522_analog_debug;
-
-
-module_param_named(analog_debug, au8522_analog_debug, int, 0644);
-
-MODULE_PARM_DESC(analog_debug,
-		 "Analog debugging messages [0=Off (default) 1=On]");
-
-struct au8522_register_config {
-	u16 reg_name;
-	u8 reg_val[8];
-};
-
-
-/* Video Decoder Filter Coefficients
-   The values are as follows from left to right
-   0="ATV RF" 1="ATV RF13" 2="CVBS" 3="S-Video" 4="PAL" 5=CVBS13" 6="SVideo13"
-*/
-static const struct au8522_register_config filter_coef[] = {
-	{AU8522_FILTER_COEF_R410, {0x25, 0x00, 0x25, 0x25, 0x00, 0x00, 0x00} },
-	{AU8522_FILTER_COEF_R411, {0x20, 0x00, 0x20, 0x20, 0x00, 0x00, 0x00} },
-	{AU8522_FILTER_COEF_R412, {0x03, 0x00, 0x03, 0x03, 0x00, 0x00, 0x00} },
-	{AU8522_FILTER_COEF_R413, {0xe6, 0x00, 0xe6, 0xe6, 0x00, 0x00, 0x00} },
-	{AU8522_FILTER_COEF_R414, {0x40, 0x00, 0x40, 0x40, 0x00, 0x00, 0x00} },
-	{AU8522_FILTER_COEF_R415, {0x1b, 0x00, 0x1b, 0x1b, 0x00, 0x00, 0x00} },
-	{AU8522_FILTER_COEF_R416, {0xc0, 0x00, 0xc0, 0x04, 0x00, 0x00, 0x00} },
-	{AU8522_FILTER_COEF_R417, {0x04, 0x00, 0x04, 0x04, 0x00, 0x00, 0x00} },
-	{AU8522_FILTER_COEF_R418, {0x8c, 0x00, 0x8c, 0x8c, 0x00, 0x00, 0x00} },
-	{AU8522_FILTER_COEF_R419, {0xa0, 0x40, 0xa0, 0xa0, 0x40, 0x40, 0x40} },
-	{AU8522_FILTER_COEF_R41A, {0x21, 0x09, 0x21, 0x21, 0x09, 0x09, 0x09} },
-	{AU8522_FILTER_COEF_R41B, {0x6c, 0x38, 0x6c, 0x6c, 0x38, 0x38, 0x38} },
-	{AU8522_FILTER_COEF_R41C, {0x03, 0xff, 0x03, 0x03, 0xff, 0xff, 0xff} },
-	{AU8522_FILTER_COEF_R41D, {0xbf, 0xc7, 0xbf, 0xbf, 0xc7, 0xc7, 0xc7} },
-	{AU8522_FILTER_COEF_R41E, {0xa0, 0xdf, 0xa0, 0xa0, 0xdf, 0xdf, 0xdf} },
-	{AU8522_FILTER_COEF_R41F, {0x10, 0x06, 0x10, 0x10, 0x06, 0x06, 0x06} },
-	{AU8522_FILTER_COEF_R420, {0xae, 0x30, 0xae, 0xae, 0x30, 0x30, 0x30} },
-	{AU8522_FILTER_COEF_R421, {0xc4, 0x01, 0xc4, 0xc4, 0x01, 0x01, 0x01} },
-	{AU8522_FILTER_COEF_R422, {0x54, 0xdd, 0x54, 0x54, 0xdd, 0xdd, 0xdd} },
-	{AU8522_FILTER_COEF_R423, {0xd0, 0xaf, 0xd0, 0xd0, 0xaf, 0xaf, 0xaf} },
-	{AU8522_FILTER_COEF_R424, {0x1c, 0xf7, 0x1c, 0x1c, 0xf7, 0xf7, 0xf7} },
-	{AU8522_FILTER_COEF_R425, {0x76, 0xdb, 0x76, 0x76, 0xdb, 0xdb, 0xdb} },
-	{AU8522_FILTER_COEF_R426, {0x61, 0xc0, 0x61, 0x61, 0xc0, 0xc0, 0xc0} },
-	{AU8522_FILTER_COEF_R427, {0xd1, 0x2f, 0xd1, 0xd1, 0x2f, 0x2f, 0x2f} },
-	{AU8522_FILTER_COEF_R428, {0x84, 0xd8, 0x84, 0x84, 0xd8, 0xd8, 0xd8} },
-	{AU8522_FILTER_COEF_R429, {0x06, 0xfb, 0x06, 0x06, 0xfb, 0xfb, 0xfb} },
-	{AU8522_FILTER_COEF_R42A, {0x21, 0xd5, 0x21, 0x21, 0xd5, 0xd5, 0xd5} },
-	{AU8522_FILTER_COEF_R42B, {0x0a, 0x3e, 0x0a, 0x0a, 0x3e, 0x3e, 0x3e} },
-	{AU8522_FILTER_COEF_R42C, {0xe6, 0x15, 0xe6, 0xe6, 0x15, 0x15, 0x15} },
-	{AU8522_FILTER_COEF_R42D, {0x01, 0x34, 0x01, 0x01, 0x34, 0x34, 0x34} },
-
-};
-#define NUM_FILTER_COEF (sizeof(filter_coef)\
-			 / sizeof(struct au8522_register_config))
-
-
-/* Registers 0x060b through 0x0652 are the LP Filter coefficients
-   The values are as follows from left to right
-   0="SIF" 1="ATVRF/ATVRF13"
-   Note: the "ATVRF/ATVRF13" mode has never been tested
-*/
-static const struct au8522_register_config lpfilter_coef[] = {
-	{0x060b, {0x21, 0x0b} },
-	{0x060c, {0xad, 0xad} },
-	{0x060d, {0x70, 0xf0} },
-	{0x060e, {0xea, 0xe9} },
-	{0x060f, {0xdd, 0xdd} },
-	{0x0610, {0x08, 0x64} },
-	{0x0611, {0x60, 0x60} },
-	{0x0612, {0xf8, 0xb2} },
-	{0x0613, {0x01, 0x02} },
-	{0x0614, {0xe4, 0xb4} },
-	{0x0615, {0x19, 0x02} },
-	{0x0616, {0xae, 0x2e} },
-	{0x0617, {0xee, 0xc5} },
-	{0x0618, {0x56, 0x56} },
-	{0x0619, {0x30, 0x58} },
-	{0x061a, {0xf9, 0xf8} },
-	{0x061b, {0x24, 0x64} },
-	{0x061c, {0x07, 0x07} },
-	{0x061d, {0x30, 0x30} },
-	{0x061e, {0xa9, 0xed} },
-	{0x061f, {0x09, 0x0b} },
-	{0x0620, {0x42, 0xc2} },
-	{0x0621, {0x1d, 0x2a} },
-	{0x0622, {0xd6, 0x56} },
-	{0x0623, {0x95, 0x8b} },
-	{0x0624, {0x2b, 0x2b} },
-	{0x0625, {0x30, 0x24} },
-	{0x0626, {0x3e, 0x3e} },
-	{0x0627, {0x62, 0xe2} },
-	{0x0628, {0xe9, 0xf5} },
-	{0x0629, {0x99, 0x19} },
-	{0x062a, {0xd4, 0x11} },
-	{0x062b, {0x03, 0x04} },
-	{0x062c, {0xb5, 0x85} },
-	{0x062d, {0x1e, 0x20} },
-	{0x062e, {0x2a, 0xea} },
-	{0x062f, {0xd7, 0xd2} },
-	{0x0630, {0x15, 0x15} },
-	{0x0631, {0xa3, 0xa9} },
-	{0x0632, {0x1f, 0x1f} },
-	{0x0633, {0xf9, 0xd1} },
-	{0x0634, {0xc0, 0xc3} },
-	{0x0635, {0x4d, 0x8d} },
-	{0x0636, {0x21, 0x31} },
-	{0x0637, {0x83, 0x83} },
-	{0x0638, {0x08, 0x8c} },
-	{0x0639, {0x19, 0x19} },
-	{0x063a, {0x45, 0xa5} },
-	{0x063b, {0xef, 0xec} },
-	{0x063c, {0x8a, 0x8a} },
-	{0x063d, {0xf4, 0xf6} },
-	{0x063e, {0x8f, 0x8f} },
-	{0x063f, {0x44, 0x0c} },
-	{0x0640, {0xef, 0xf0} },
-	{0x0641, {0x66, 0x66} },
-	{0x0642, {0xcc, 0xd2} },
-	{0x0643, {0x41, 0x41} },
-	{0x0644, {0x63, 0x93} },
-	{0x0645, {0x8e, 0x8e} },
-	{0x0646, {0xa2, 0x42} },
-	{0x0647, {0x7b, 0x7b} },
-	{0x0648, {0x04, 0x04} },
-	{0x0649, {0x00, 0x00} },
-	{0x064a, {0x40, 0x40} },
-	{0x064b, {0x8c, 0x98} },
-	{0x064c, {0x00, 0x00} },
-	{0x064d, {0x63, 0xc3} },
-	{0x064e, {0x04, 0x04} },
-	{0x064f, {0x20, 0x20} },
-	{0x0650, {0x00, 0x00} },
-	{0x0651, {0x40, 0x40} },
-	{0x0652, {0x01, 0x01} },
-};
-#define NUM_LPFILTER_COEF (sizeof(lpfilter_coef)\
-			   / sizeof(struct au8522_register_config))
-
-static inline struct au8522_state *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct au8522_state, sd);
-}
-
-static void setup_vbi(struct au8522_state *state, int aud_input)
-{
-	int i;
-
-	/* These are set to zero regardless of what mode we're in */
-	au8522_writereg(state, AU8522_TVDEC_VBI_CTRL_H_REG017H, 0x00);
-	au8522_writereg(state, AU8522_TVDEC_VBI_CTRL_L_REG018H, 0x00);
-	au8522_writereg(state, AU8522_TVDEC_VBI_USER_TOTAL_BITS_REG019H, 0x00);
-	au8522_writereg(state, AU8522_TVDEC_VBI_USER_TUNIT_H_REG01AH, 0x00);
-	au8522_writereg(state, AU8522_TVDEC_VBI_USER_TUNIT_L_REG01BH, 0x00);
-	au8522_writereg(state, AU8522_TVDEC_VBI_USER_THRESH1_REG01CH, 0x00);
-	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_PAT2_REG01EH, 0x00);
-	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_PAT1_REG01FH, 0x00);
-	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_PAT0_REG020H, 0x00);
-	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK2_REG021H,
-			0x00);
-	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK1_REG022H,
-			0x00);
-	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK0_REG023H,
-			0x00);
-
-	/* Setup the VBI registers */
-	for (i = 0x30; i < 0x60; i++)
-		au8522_writereg(state, i, 0x40);
-
-	/* For some reason, every register is 0x40 except register 0x44
-	   (confirmed via the HVR-950q USB capture) */
-	au8522_writereg(state, 0x44, 0x60);
-
-	/* Enable VBI (we always do this regardless of whether the user is
-	   viewing closed caption info) */
-	au8522_writereg(state, AU8522_TVDEC_VBI_CTRL_H_REG017H,
-			AU8522_TVDEC_VBI_CTRL_H_REG017H_CCON);
-
-}
-
-static void setup_decoder_defaults(struct au8522_state *state, u8 input_mode)
-{
-	int i;
-	int filter_coef_type;
-
-	/* Provide reasonable defaults for picture tuning values */
-	au8522_writereg(state, AU8522_TVDEC_SHARPNESSREG009H, 0x07);
-	au8522_writereg(state, AU8522_TVDEC_BRIGHTNESS_REG00AH, 0xed);
-	state->brightness = 0xed - 128;
-	au8522_writereg(state, AU8522_TVDEC_CONTRAST_REG00BH, 0x79);
-	state->contrast = 0x79;
-	au8522_writereg(state, AU8522_TVDEC_SATURATION_CB_REG00CH, 0x80);
-	au8522_writereg(state, AU8522_TVDEC_SATURATION_CR_REG00DH, 0x80);
-	state->saturation = 0x80;
-	au8522_writereg(state, AU8522_TVDEC_HUE_H_REG00EH, 0x00);
-	au8522_writereg(state, AU8522_TVDEC_HUE_L_REG00FH, 0x00);
-	state->hue = 0x00;
-
-	/* Other decoder registers */
-	au8522_writereg(state, AU8522_TVDEC_INT_MASK_REG010H, 0x00);
-
-	if (input_mode == 0x23) {
-		/* S-Video input mapping */
-		au8522_writereg(state, AU8522_VIDEO_MODE_REG011H, 0x04);
-	} else {
-		/* All other modes (CVBS/ATVRF etc.) */
-		au8522_writereg(state, AU8522_VIDEO_MODE_REG011H, 0x00);
-	}
-
-	au8522_writereg(state, AU8522_TVDEC_PGA_REG012H,
-			AU8522_TVDEC_PGA_REG012H_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_COMB_MODE_REG015H,
-			AU8522_TVDEC_COMB_MODE_REG015H_CVBS);
-	au8522_writereg(state, AU8522_TVDED_DBG_MODE_REG060H,
-			AU8522_TVDED_DBG_MODE_REG060H_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL1_REG061H,
-			AU8522_TVDEC_FORMAT_CTRL1_REG061H_CVBS13);
-	au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL2_REG062H,
-			AU8522_TVDEC_FORMAT_CTRL2_REG062H_CVBS13);
-	au8522_writereg(state, AU8522_TVDEC_VCR_DET_LLIM_REG063H,
-			AU8522_TVDEC_VCR_DET_LLIM_REG063H_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_VCR_DET_HLIM_REG064H,
-			AU8522_TVDEC_VCR_DET_HLIM_REG064H_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR1_REG065H,
-			AU8522_TVDEC_COMB_VDIF_THR1_REG065H_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR2_REG066H,
-			AU8522_TVDEC_COMB_VDIF_THR2_REG066H_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR3_REG067H,
-			AU8522_TVDEC_COMB_VDIF_THR3_REG067H_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_COMB_NOTCH_THR_REG068H,
-			AU8522_TVDEC_COMB_NOTCH_THR_REG068H_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR1_REG069H,
-			AU8522_TVDEC_COMB_HDIF_THR1_REG069H_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR2_REG06AH,
-			AU8522_TVDEC_COMB_HDIF_THR2_REG06AH_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR3_REG06BH,
-			AU8522_TVDEC_COMB_HDIF_THR3_REG06BH_CVBS);
-	if (input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13 ||
-	    input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24) {
-		au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH,
-				AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_SVIDEO);
-		au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH,
-				AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_SVIDEO);
-	} else {
-		au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH,
-				AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_CVBS);
-		au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH,
-				AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_CVBS);
-	}
-	au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH,
-			AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_UV_SEP_THR_REG06FH,
-			AU8522_TVDEC_UV_SEP_THR_REG06FH_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H,
-			AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H_CVBS);
-	au8522_writereg(state, AU8522_REG071H, AU8522_REG071H_CVBS);
-	au8522_writereg(state, AU8522_REG072H, AU8522_REG072H_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_COMB_DC_THR2_NTSC_REG073H,
-			AU8522_TVDEC_COMB_DC_THR2_NTSC_REG073H_CVBS);
-	au8522_writereg(state, AU8522_REG074H, AU8522_REG074H_CVBS);
-	au8522_writereg(state, AU8522_REG075H, AU8522_REG075H_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_DCAGC_CTRL_REG077H,
-			AU8522_TVDEC_DCAGC_CTRL_REG077H_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_PIC_START_ADJ_REG078H,
-			AU8522_TVDEC_PIC_START_ADJ_REG078H_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_AGC_HIGH_LIMIT_REG079H,
-			AU8522_TVDEC_AGC_HIGH_LIMIT_REG079H_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_MACROVISION_SYNC_THR_REG07AH,
-			AU8522_TVDEC_MACROVISION_SYNC_THR_REG07AH_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_INTRP_CTRL_REG07BH,
-			AU8522_TVDEC_INTRP_CTRL_REG07BH_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_AGC_LOW_LIMIT_REG0E4H,
-			AU8522_TVDEC_AGC_LOW_LIMIT_REG0E4H_CVBS);
-	au8522_writereg(state, AU8522_TOREGAAGC_REG0E5H,
-			AU8522_TOREGAAGC_REG0E5H_CVBS);
-	au8522_writereg(state, AU8522_REG016H, AU8522_REG016H_CVBS);
-
-	setup_vbi(state, 0);
-
-	if (input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13 ||
-	    input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24) {
-		/* Despite what the table says, for the HVR-950q we still need
-		   to be in CVBS mode for the S-Video input (reason unknown). */
-		/* filter_coef_type = 3; */
-		filter_coef_type = 5;
-	} else {
-		filter_coef_type = 5;
-	}
-
-	/* Load the Video Decoder Filter Coefficients */
-	for (i = 0; i < NUM_FILTER_COEF; i++) {
-		au8522_writereg(state, filter_coef[i].reg_name,
-				filter_coef[i].reg_val[filter_coef_type]);
-	}
-
-	/* It's not clear what these registers are for, but they are always
-	   set to the same value regardless of what mode we're in */
-	au8522_writereg(state, AU8522_REG42EH, 0x87);
-	au8522_writereg(state, AU8522_REG42FH, 0xa2);
-	au8522_writereg(state, AU8522_REG430H, 0xbf);
-	au8522_writereg(state, AU8522_REG431H, 0xcb);
-	au8522_writereg(state, AU8522_REG432H, 0xa1);
-	au8522_writereg(state, AU8522_REG433H, 0x41);
-	au8522_writereg(state, AU8522_REG434H, 0x88);
-	au8522_writereg(state, AU8522_REG435H, 0xc2);
-	au8522_writereg(state, AU8522_REG436H, 0x3c);
-}
-
-static void au8522_setup_cvbs_mode(struct au8522_state *state)
-{
-	/* here we're going to try the pre-programmed route */
-	au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H,
-			AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS);
-
-	/* PGA in automatic mode */
-	au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00);
-
-	/* Enable clamping control */
-	au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x00);
-
-	au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H,
-			AU8522_INPUT_CONTROL_REG081H_CVBS_CH1);
-
-	setup_decoder_defaults(state, AU8522_INPUT_CONTROL_REG081H_CVBS_CH1);
-
-	au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
-			AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS);
-}
-
-static void au8522_setup_cvbs_tuner_mode(struct au8522_state *state)
-{
-	/* here we're going to try the pre-programmed route */
-	au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H,
-			AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS);
-
-	/* It's not clear why we have to have the PGA in automatic mode while
-	   enabling clamp control, but it's what Windows does */
-	au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00);
-
-	/* Enable clamping control */
-	au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x0e);
-
-	/* Disable automatic PGA (since the CVBS is coming from the tuner) */
-	au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x10);
-
-	/* Set input mode to CVBS on channel 4 with SIF audio input enabled */
-	au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H,
-			AU8522_INPUT_CONTROL_REG081H_CVBS_CH4_SIF);
-
-	setup_decoder_defaults(state,
-			       AU8522_INPUT_CONTROL_REG081H_CVBS_CH4_SIF);
-
-	au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
-			AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS);
-}
-
-static void au8522_setup_svideo_mode(struct au8522_state *state)
-{
-	au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H,
-			AU8522_MODULE_CLOCK_CONTROL_REG0A3H_SVIDEO);
-
-	/* Set input to Y on Channe1, C on Channel 3 */
-	au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H,
-			AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13);
-
-	/* PGA in automatic mode */
-	au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00);
-
-	/* Enable clamping control */
-	au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x00);
-
-	setup_decoder_defaults(state,
-			       AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13);
-
-	au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
-			AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static void disable_audio_input(struct au8522_state *state)
-{
-	au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x00);
-	au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x00);
-	au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0x00);
-
-	au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H, 0x04);
-	au8522_writereg(state, AU8522_I2S_CTRL_2_REG112H, 0x02);
-
-	au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
-			AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_SVIDEO);
-}
-
-/* 0=disable, 1=SIF */
-static void set_audio_input(struct au8522_state *state, int aud_input)
-{
-	int i;
-
-	/* Note that this function needs to be used in conjunction with setting
-	   the input routing via register 0x81 */
-
-	if (aud_input == AU8522_AUDIO_NONE) {
-		disable_audio_input(state);
-		return;
-	}
-
-	if (aud_input != AU8522_AUDIO_SIF) {
-		/* The caller asked for a mode we don't currently support */
-		printk(KERN_ERR "Unsupported audio mode requested! mode=%d\n",
-		       aud_input);
-		return;
-	}
-
-	/* Load the Audio Decoder Filter Coefficients */
-	for (i = 0; i < NUM_LPFILTER_COEF; i++) {
-		au8522_writereg(state, lpfilter_coef[i].reg_name,
-				lpfilter_coef[i].reg_val[0]);
-	}
-
-	/* Setup audio */
-	au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x00);
-	au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x00);
-	au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0x00);
-	au8522_writereg(state, AU8522_I2C_CONTROL_REG1_REG091H, 0x80);
-	au8522_writereg(state, AU8522_I2C_CONTROL_REG0_REG090H, 0x84);
-	msleep(150);
-	au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, 0x00);
-	msleep(1);
-	au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, 0x9d);
-	msleep(50);
-	au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x7F);
-	au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x7F);
-	au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0xff);
-	msleep(80);
-	au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x7F);
-	au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x7F);
-	au8522_writereg(state, AU8522_REG0F9H, AU8522_REG0F9H_AUDIO);
-	au8522_writereg(state, AU8522_AUDIO_MODE_REG0F1H, 0x82);
-	msleep(70);
-	au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H, 0x09);
-	au8522_writereg(state, AU8522_AUDIOFREQ_REG606H, 0x03);
-	au8522_writereg(state, AU8522_I2S_CTRL_2_REG112H, 0xc2);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int au8522_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct au8522_state *state = to_state(sd);
-
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		state->brightness = ctrl->value;
-		au8522_writereg(state, AU8522_TVDEC_BRIGHTNESS_REG00AH,
-				ctrl->value - 128);
-		break;
-	case V4L2_CID_CONTRAST:
-		state->contrast = ctrl->value;
-		au8522_writereg(state, AU8522_TVDEC_CONTRAST_REG00BH,
-				ctrl->value);
-		break;
-	case V4L2_CID_SATURATION:
-		state->saturation = ctrl->value;
-		au8522_writereg(state, AU8522_TVDEC_SATURATION_CB_REG00CH,
-				ctrl->value);
-		au8522_writereg(state, AU8522_TVDEC_SATURATION_CR_REG00DH,
-				ctrl->value);
-		break;
-	case V4L2_CID_HUE:
-		state->hue = ctrl->value;
-		au8522_writereg(state, AU8522_TVDEC_HUE_H_REG00EH,
-				ctrl->value >> 8);
-		au8522_writereg(state, AU8522_TVDEC_HUE_L_REG00FH,
-				ctrl->value & 0xFF);
-		break;
-	case V4L2_CID_AUDIO_VOLUME:
-	case V4L2_CID_AUDIO_BASS:
-	case V4L2_CID_AUDIO_TREBLE:
-	case V4L2_CID_AUDIO_BALANCE:
-	case V4L2_CID_AUDIO_MUTE:
-		/* Not yet implemented */
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int au8522_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct au8522_state *state = to_state(sd);
-
-	/* Note that we are using values cached in the state structure instead
-	   of reading the registers due to issues with i2c reads not working
-	   properly/consistently yet on the HVR-950q */
-
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		ctrl->value = state->brightness;
-		break;
-	case V4L2_CID_CONTRAST:
-		ctrl->value = state->contrast;
-		break;
-	case V4L2_CID_SATURATION:
-		ctrl->value = state->saturation;
-		break;
-	case V4L2_CID_HUE:
-		ctrl->value = state->hue;
-		break;
-	case V4L2_CID_AUDIO_VOLUME:
-	case V4L2_CID_AUDIO_BASS:
-	case V4L2_CID_AUDIO_TREBLE:
-	case V4L2_CID_AUDIO_BALANCE:
-	case V4L2_CID_AUDIO_MUTE:
-		/* Not yet supported */
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int au8522_g_register(struct v4l2_subdev *sd,
-			     struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct au8522_state *state = to_state(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	reg->val = au8522_readreg(state, reg->reg & 0xffff);
-	return 0;
-}
-
-static int au8522_s_register(struct v4l2_subdev *sd,
-			     struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct au8522_state *state = to_state(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	au8522_writereg(state, reg->reg, reg->val & 0xff);
-	return 0;
-}
-#endif
-
-static int au8522_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	struct au8522_state *state = to_state(sd);
-
-	if (enable) {
-		au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
-				0x01);
-		msleep(1);
-		au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
-				AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS);
-	} else {
-		/* This does not completely power down the device
-		   (it only reduces it from around 140ma to 80ma) */
-		au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
-				1 << 5);
-	}
-	return 0;
-}
-
-static int au8522_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
-	switch (qc->id) {
-	case V4L2_CID_CONTRAST:
-		return v4l2_ctrl_query_fill(qc, 0, 255, 1,
-					    AU8522_TVDEC_CONTRAST_REG00BH_CVBS);
-	case V4L2_CID_BRIGHTNESS:
-		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 109);
-	case V4L2_CID_SATURATION:
-		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
-	case V4L2_CID_HUE:
-		return v4l2_ctrl_query_fill(qc, -32768, 32768, 1, 0);
-	default:
-		break;
-	}
-
-	qc->type = 0;
-	return -EINVAL;
-}
-
-static int au8522_reset(struct v4l2_subdev *sd, u32 val)
-{
-	struct au8522_state *state = to_state(sd);
-
-	state->operational_mode = AU8522_ANALOG_MODE;
-
-	/* Clear out any state associated with the digital side of the
-	   chip, so that when it gets powered back up it won't think
-	   that it is already tuned */
-	state->current_frequency = 0;
-
-	au8522_writereg(state, 0xa4, 1 << 5);
-
-	return 0;
-}
-
-static int au8522_s_video_routing(struct v4l2_subdev *sd,
-					u32 input, u32 output, u32 config)
-{
-	struct au8522_state *state = to_state(sd);
-
-	au8522_reset(sd, 0);
-
-	/* Jam open the i2c gate to the tuner.  We do this here to handle the
-	   case where the user went into digital mode (causing the gate to be
-	   closed), and then came back to analog mode */
-	au8522_writereg(state, 0x106, 1);
-
-	if (input == AU8522_COMPOSITE_CH1) {
-		au8522_setup_cvbs_mode(state);
-	} else if (input == AU8522_SVIDEO_CH13) {
-		au8522_setup_svideo_mode(state);
-	} else if (input == AU8522_COMPOSITE_CH4_SIF) {
-		au8522_setup_cvbs_tuner_mode(state);
-	} else {
-		printk(KERN_ERR "au8522 mode not currently supported\n");
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int au8522_s_audio_routing(struct v4l2_subdev *sd,
-					u32 input, u32 output, u32 config)
-{
-	struct au8522_state *state = to_state(sd);
-	set_audio_input(state, input);
-	return 0;
-}
-
-static int au8522_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
-{
-	int val = 0;
-	struct au8522_state *state = to_state(sd);
-	u8 lock_status;
-
-	/* Interrogate the decoder to see if we are getting a real signal */
-	lock_status = au8522_readreg(state, 0x00);
-	if (lock_status == 0xa2)
-		vt->signal = 0xffff;
-	else
-		vt->signal = 0x00;
-
-	vt->capability |=
-		V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 |
-		V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP;
-
-	val = V4L2_TUNER_SUB_MONO;
-	vt->rxsubchans = val;
-	vt->audmode = V4L2_TUNER_MODE_STEREO;
-	return 0;
-}
-
-static int au8522_g_chip_ident(struct v4l2_subdev *sd,
-			       struct v4l2_dbg_chip_ident *chip)
-{
-	struct au8522_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, state->id, state->rev);
-}
-
-static int au8522_log_status(struct v4l2_subdev *sd)
-{
-	/* FIXME: Add some status info here */
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops au8522_core_ops = {
-	.log_status = au8522_log_status,
-	.g_chip_ident = au8522_g_chip_ident,
-	.g_ctrl = au8522_g_ctrl,
-	.s_ctrl = au8522_s_ctrl,
-	.queryctrl = au8522_queryctrl,
-	.reset = au8522_reset,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.g_register = au8522_g_register,
-	.s_register = au8522_s_register,
-#endif
-};
-
-static const struct v4l2_subdev_tuner_ops au8522_tuner_ops = {
-	.g_tuner = au8522_g_tuner,
-};
-
-static const struct v4l2_subdev_audio_ops au8522_audio_ops = {
-	.s_routing = au8522_s_audio_routing,
-};
-
-static const struct v4l2_subdev_video_ops au8522_video_ops = {
-	.s_routing = au8522_s_video_routing,
-	.s_stream = au8522_s_stream,
-};
-
-static const struct v4l2_subdev_ops au8522_ops = {
-	.core = &au8522_core_ops,
-	.tuner = &au8522_tuner_ops,
-	.audio = &au8522_audio_ops,
-	.video = &au8522_video_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static int au8522_probe(struct i2c_client *client,
-			const struct i2c_device_id *did)
-{
-	struct au8522_state *state;
-	struct v4l2_subdev *sd;
-	int instance;
-	struct au8522_config *demod_config;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter,
-				     I2C_FUNC_SMBUS_BYTE_DATA)) {
-		return -EIO;
-	}
-
-	/* allocate memory for the internal state */
-	instance = au8522_get_state(&state, client->adapter, client->addr);
-	switch (instance) {
-	case 0:
-		printk(KERN_ERR "au8522_decoder allocation failed\n");
-		return -EIO;
-	case 1:
-		/* new demod instance */
-		printk(KERN_INFO "au8522_decoder creating new instance...\n");
-		break;
-	default:
-		/* existing demod instance */
-		printk(KERN_INFO "au8522_decoder attach existing instance.\n");
-		break;
-	}
-
-	demod_config = kzalloc(sizeof(struct au8522_config), GFP_KERNEL);
-	if (demod_config == NULL) {
-		if (instance == 1)
-			kfree(state);
-		return -ENOMEM;
-	}
-	demod_config->demod_address = 0x8e >> 1;
-
-	state->config = demod_config;
-	state->i2c = client->adapter;
-
-	sd = &state->sd;
-	v4l2_i2c_subdev_init(sd, client, &au8522_ops);
-
-	state->c = client;
-	state->vid_input = AU8522_COMPOSITE_CH1;
-	state->aud_input = AU8522_AUDIO_NONE;
-	state->id = 8522;
-	state->rev = 0;
-
-	/* Jam open the i2c gate to the tuner */
-	au8522_writereg(state, 0x106, 1);
-
-	return 0;
-}
-
-static int au8522_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	v4l2_device_unregister_subdev(sd);
-	au8522_release_state(to_state(sd));
-	return 0;
-}
-
-static const struct i2c_device_id au8522_id[] = {
-	{"au8522", 0},
-	{}
-};
-
-MODULE_DEVICE_TABLE(i2c, au8522_id);
-
-static struct i2c_driver au8522_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "au8522",
-	},
-	.probe		= au8522_probe,
-	.remove		= au8522_remove,
-	.id_table	= au8522_id,
-};
-
-module_i2c_driver(au8522_driver);
diff --git a/drivers/media/dvb/frontends/au8522_dig.c b/drivers/media/dvb/frontends/au8522_dig.c
deleted file mode 100644
index 5fc70d6..0000000
--- a/drivers/media/dvb/frontends/au8522_dig.c
+++ /dev/null
@@ -1,826 +0,0 @@
-/*
-    Auvitek AU8522 QAM/8VSB demodulator driver
-
-    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include "dvb_frontend.h"
-#include "au8522.h"
-#include "au8522_priv.h"
-
-static int debug;
-
-#define dprintk(arg...)\
-	do { if (debug)\
-		printk(arg);\
-	} while (0)
-
-struct mse2snr_tab {
-	u16 val;
-	u16 data;
-};
-
-/* VSB SNR lookup table */
-static struct mse2snr_tab vsb_mse2snr_tab[] = {
-	{   0, 270 },
-	{   2, 250 },
-	{   3, 240 },
-	{   5, 230 },
-	{   7, 220 },
-	{   9, 210 },
-	{  12, 200 },
-	{  13, 195 },
-	{  15, 190 },
-	{  17, 185 },
-	{  19, 180 },
-	{  21, 175 },
-	{  24, 170 },
-	{  27, 165 },
-	{  31, 160 },
-	{  32, 158 },
-	{  33, 156 },
-	{  36, 152 },
-	{  37, 150 },
-	{  39, 148 },
-	{  40, 146 },
-	{  41, 144 },
-	{  43, 142 },
-	{  44, 140 },
-	{  48, 135 },
-	{  50, 130 },
-	{  43, 142 },
-	{  53, 125 },
-	{  56, 120 },
-	{ 256, 115 },
-};
-
-/* QAM64 SNR lookup table */
-static struct mse2snr_tab qam64_mse2snr_tab[] = {
-	{  15,   0 },
-	{  16, 290 },
-	{  17, 288 },
-	{  18, 286 },
-	{  19, 284 },
-	{  20, 282 },
-	{  21, 281 },
-	{  22, 279 },
-	{  23, 277 },
-	{  24, 275 },
-	{  25, 273 },
-	{  26, 271 },
-	{  27, 269 },
-	{  28, 268 },
-	{  29, 266 },
-	{  30, 264 },
-	{  31, 262 },
-	{  32, 260 },
-	{  33, 259 },
-	{  34, 258 },
-	{  35, 256 },
-	{  36, 255 },
-	{  37, 254 },
-	{  38, 252 },
-	{  39, 251 },
-	{  40, 250 },
-	{  41, 249 },
-	{  42, 248 },
-	{  43, 246 },
-	{  44, 245 },
-	{  45, 244 },
-	{  46, 242 },
-	{  47, 241 },
-	{  48, 240 },
-	{  50, 239 },
-	{  51, 238 },
-	{  53, 237 },
-	{  54, 236 },
-	{  56, 235 },
-	{  57, 234 },
-	{  59, 233 },
-	{  60, 232 },
-	{  62, 231 },
-	{  63, 230 },
-	{  65, 229 },
-	{  67, 228 },
-	{  68, 227 },
-	{  70, 226 },
-	{  71, 225 },
-	{  73, 224 },
-	{  74, 223 },
-	{  76, 222 },
-	{  78, 221 },
-	{  80, 220 },
-	{  82, 219 },
-	{  85, 218 },
-	{  88, 217 },
-	{  90, 216 },
-	{  92, 215 },
-	{  93, 214 },
-	{  94, 212 },
-	{  95, 211 },
-	{  97, 210 },
-	{  99, 209 },
-	{ 101, 208 },
-	{ 102, 207 },
-	{ 104, 206 },
-	{ 107, 205 },
-	{ 111, 204 },
-	{ 114, 203 },
-	{ 118, 202 },
-	{ 122, 201 },
-	{ 125, 200 },
-	{ 128, 199 },
-	{ 130, 198 },
-	{ 132, 197 },
-	{ 256, 190 },
-};
-
-/* QAM256 SNR lookup table */
-static struct mse2snr_tab qam256_mse2snr_tab[] = {
-	{  16,   0 },
-	{  17, 400 },
-	{  18, 398 },
-	{  19, 396 },
-	{  20, 394 },
-	{  21, 392 },
-	{  22, 390 },
-	{  23, 388 },
-	{  24, 386 },
-	{  25, 384 },
-	{  26, 382 },
-	{  27, 380 },
-	{  28, 379 },
-	{  29, 378 },
-	{  30, 377 },
-	{  31, 376 },
-	{  32, 375 },
-	{  33, 374 },
-	{  34, 373 },
-	{  35, 372 },
-	{  36, 371 },
-	{  37, 370 },
-	{  38, 362 },
-	{  39, 354 },
-	{  40, 346 },
-	{  41, 338 },
-	{  42, 330 },
-	{  43, 328 },
-	{  44, 326 },
-	{  45, 324 },
-	{  46, 322 },
-	{  47, 320 },
-	{  48, 319 },
-	{  49, 318 },
-	{  50, 317 },
-	{  51, 316 },
-	{  52, 315 },
-	{  53, 314 },
-	{  54, 313 },
-	{  55, 312 },
-	{  56, 311 },
-	{  57, 310 },
-	{  58, 308 },
-	{  59, 306 },
-	{  60, 304 },
-	{  61, 302 },
-	{  62, 300 },
-	{  63, 298 },
-	{  65, 295 },
-	{  68, 294 },
-	{  70, 293 },
-	{  73, 292 },
-	{  76, 291 },
-	{  78, 290 },
-	{  79, 289 },
-	{  81, 288 },
-	{  82, 287 },
-	{  83, 286 },
-	{  84, 285 },
-	{  85, 284 },
-	{  86, 283 },
-	{  88, 282 },
-	{  89, 281 },
-	{ 256, 280 },
-};
-
-static int au8522_mse2snr_lookup(struct mse2snr_tab *tab, int sz, int mse,
-				 u16 *snr)
-{
-	int i, ret = -EINVAL;
-	dprintk("%s()\n", __func__);
-
-	for (i = 0; i < sz; i++) {
-		if (mse < tab[i].val) {
-			*snr = tab[i].data;
-			ret = 0;
-			break;
-		}
-	}
-	dprintk("%s() snr=%d\n", __func__, *snr);
-	return ret;
-}
-
-static int au8522_set_if(struct dvb_frontend *fe, enum au8522_if_freq if_freq)
-{
-	struct au8522_state *state = fe->demodulator_priv;
-	u8 r0b5, r0b6, r0b7;
-	char *ifmhz;
-
-	switch (if_freq) {
-	case AU8522_IF_3_25MHZ:
-		ifmhz = "3.25";
-		r0b5 = 0x00;
-		r0b6 = 0x3d;
-		r0b7 = 0xa0;
-		break;
-	case AU8522_IF_4MHZ:
-		ifmhz = "4.00";
-		r0b5 = 0x00;
-		r0b6 = 0x4b;
-		r0b7 = 0xd9;
-		break;
-	case AU8522_IF_6MHZ:
-		ifmhz = "6.00";
-		r0b5 = 0xfb;
-		r0b6 = 0x8e;
-		r0b7 = 0x39;
-		break;
-	default:
-		dprintk("%s() IF Frequency not supported\n", __func__);
-		return -EINVAL;
-	}
-	dprintk("%s() %s MHz\n", __func__, ifmhz);
-	au8522_writereg(state, 0x80b5, r0b5);
-	au8522_writereg(state, 0x80b6, r0b6);
-	au8522_writereg(state, 0x80b7, r0b7);
-
-	return 0;
-}
-
-/* VSB Modulation table */
-static struct {
-	u16 reg;
-	u16 data;
-} VSB_mod_tab[] = {
-	{ 0x8090, 0x84 },
-	{ 0x4092, 0x11 },
-	{ 0x2005, 0x00 },
-	{ 0x8091, 0x80 },
-	{ 0x80a3, 0x0c },
-	{ 0x80a4, 0xe8 },
-	{ 0x8081, 0xc4 },
-	{ 0x80a5, 0x40 },
-	{ 0x80a7, 0x40 },
-	{ 0x80a6, 0x67 },
-	{ 0x8262, 0x20 },
-	{ 0x821c, 0x30 },
-	{ 0x80d8, 0x1a },
-	{ 0x8227, 0xa0 },
-	{ 0x8121, 0xff },
-	{ 0x80a8, 0xf0 },
-	{ 0x80a9, 0x05 },
-	{ 0x80aa, 0x77 },
-	{ 0x80ab, 0xf0 },
-	{ 0x80ac, 0x05 },
-	{ 0x80ad, 0x77 },
-	{ 0x80ae, 0x41 },
-	{ 0x80af, 0x66 },
-	{ 0x821b, 0xcc },
-	{ 0x821d, 0x80 },
-	{ 0x80a4, 0xe8 },
-	{ 0x8231, 0x13 },
-};
-
-/* QAM64 Modulation table */
-static struct {
-	u16 reg;
-	u16 data;
-} QAM64_mod_tab[] = {
-	{ 0x00a3, 0x09 },
-	{ 0x00a4, 0x00 },
-	{ 0x0081, 0xc4 },
-	{ 0x00a5, 0x40 },
-	{ 0x00aa, 0x77 },
-	{ 0x00ad, 0x77 },
-	{ 0x00a6, 0x67 },
-	{ 0x0262, 0x20 },
-	{ 0x021c, 0x30 },
-	{ 0x00b8, 0x3e },
-	{ 0x00b9, 0xf0 },
-	{ 0x00ba, 0x01 },
-	{ 0x00bb, 0x18 },
-	{ 0x00bc, 0x50 },
-	{ 0x00bd, 0x00 },
-	{ 0x00be, 0xea },
-	{ 0x00bf, 0xef },
-	{ 0x00c0, 0xfc },
-	{ 0x00c1, 0xbd },
-	{ 0x00c2, 0x1f },
-	{ 0x00c3, 0xfc },
-	{ 0x00c4, 0xdd },
-	{ 0x00c5, 0xaf },
-	{ 0x00c6, 0x00 },
-	{ 0x00c7, 0x38 },
-	{ 0x00c8, 0x30 },
-	{ 0x00c9, 0x05 },
-	{ 0x00ca, 0x4a },
-	{ 0x00cb, 0xd0 },
-	{ 0x00cc, 0x01 },
-	{ 0x00cd, 0xd9 },
-	{ 0x00ce, 0x6f },
-	{ 0x00cf, 0xf9 },
-	{ 0x00d0, 0x70 },
-	{ 0x00d1, 0xdf },
-	{ 0x00d2, 0xf7 },
-	{ 0x00d3, 0xc2 },
-	{ 0x00d4, 0xdf },
-	{ 0x00d5, 0x02 },
-	{ 0x00d6, 0x9a },
-	{ 0x00d7, 0xd0 },
-	{ 0x0250, 0x0d },
-	{ 0x0251, 0xcd },
-	{ 0x0252, 0xe0 },
-	{ 0x0253, 0x05 },
-	{ 0x0254, 0xa7 },
-	{ 0x0255, 0xff },
-	{ 0x0256, 0xed },
-	{ 0x0257, 0x5b },
-	{ 0x0258, 0xae },
-	{ 0x0259, 0xe6 },
-	{ 0x025a, 0x3d },
-	{ 0x025b, 0x0f },
-	{ 0x025c, 0x0d },
-	{ 0x025d, 0xea },
-	{ 0x025e, 0xf2 },
-	{ 0x025f, 0x51 },
-	{ 0x0260, 0xf5 },
-	{ 0x0261, 0x06 },
-	{ 0x021a, 0x00 },
-	{ 0x0546, 0x40 },
-	{ 0x0210, 0xc7 },
-	{ 0x0211, 0xaa },
-	{ 0x0212, 0xab },
-	{ 0x0213, 0x02 },
-	{ 0x0502, 0x00 },
-	{ 0x0121, 0x04 },
-	{ 0x0122, 0x04 },
-	{ 0x052e, 0x10 },
-	{ 0x00a4, 0xca },
-	{ 0x00a7, 0x40 },
-	{ 0x0526, 0x01 },
-};
-
-/* QAM256 Modulation table */
-static struct {
-	u16 reg;
-	u16 data;
-} QAM256_mod_tab[] = {
-	{ 0x80a3, 0x09 },
-	{ 0x80a4, 0x00 },
-	{ 0x8081, 0xc4 },
-	{ 0x80a5, 0x40 },
-	{ 0x80aa, 0x77 },
-	{ 0x80ad, 0x77 },
-	{ 0x80a6, 0x67 },
-	{ 0x8262, 0x20 },
-	{ 0x821c, 0x30 },
-	{ 0x80b8, 0x3e },
-	{ 0x80b9, 0xf0 },
-	{ 0x80ba, 0x01 },
-	{ 0x80bb, 0x18 },
-	{ 0x80bc, 0x50 },
-	{ 0x80bd, 0x00 },
-	{ 0x80be, 0xea },
-	{ 0x80bf, 0xef },
-	{ 0x80c0, 0xfc },
-	{ 0x80c1, 0xbd },
-	{ 0x80c2, 0x1f },
-	{ 0x80c3, 0xfc },
-	{ 0x80c4, 0xdd },
-	{ 0x80c5, 0xaf },
-	{ 0x80c6, 0x00 },
-	{ 0x80c7, 0x38 },
-	{ 0x80c8, 0x30 },
-	{ 0x80c9, 0x05 },
-	{ 0x80ca, 0x4a },
-	{ 0x80cb, 0xd0 },
-	{ 0x80cc, 0x01 },
-	{ 0x80cd, 0xd9 },
-	{ 0x80ce, 0x6f },
-	{ 0x80cf, 0xf9 },
-	{ 0x80d0, 0x70 },
-	{ 0x80d1, 0xdf },
-	{ 0x80d2, 0xf7 },
-	{ 0x80d3, 0xc2 },
-	{ 0x80d4, 0xdf },
-	{ 0x80d5, 0x02 },
-	{ 0x80d6, 0x9a },
-	{ 0x80d7, 0xd0 },
-	{ 0x8250, 0x0d },
-	{ 0x8251, 0xcd },
-	{ 0x8252, 0xe0 },
-	{ 0x8253, 0x05 },
-	{ 0x8254, 0xa7 },
-	{ 0x8255, 0xff },
-	{ 0x8256, 0xed },
-	{ 0x8257, 0x5b },
-	{ 0x8258, 0xae },
-	{ 0x8259, 0xe6 },
-	{ 0x825a, 0x3d },
-	{ 0x825b, 0x0f },
-	{ 0x825c, 0x0d },
-	{ 0x825d, 0xea },
-	{ 0x825e, 0xf2 },
-	{ 0x825f, 0x51 },
-	{ 0x8260, 0xf5 },
-	{ 0x8261, 0x06 },
-	{ 0x821a, 0x00 },
-	{ 0x8546, 0x40 },
-	{ 0x8210, 0x26 },
-	{ 0x8211, 0xf6 },
-	{ 0x8212, 0x84 },
-	{ 0x8213, 0x02 },
-	{ 0x8502, 0x01 },
-	{ 0x8121, 0x04 },
-	{ 0x8122, 0x04 },
-	{ 0x852e, 0x10 },
-	{ 0x80a4, 0xca },
-	{ 0x80a7, 0x40 },
-	{ 0x8526, 0x01 },
-};
-
-static int au8522_enable_modulation(struct dvb_frontend *fe,
-				    fe_modulation_t m)
-{
-	struct au8522_state *state = fe->demodulator_priv;
-	int i;
-
-	dprintk("%s(0x%08x)\n", __func__, m);
-
-	switch (m) {
-	case VSB_8:
-		dprintk("%s() VSB_8\n", __func__);
-		for (i = 0; i < ARRAY_SIZE(VSB_mod_tab); i++)
-			au8522_writereg(state,
-				VSB_mod_tab[i].reg,
-				VSB_mod_tab[i].data);
-		au8522_set_if(fe, state->config->vsb_if);
-		break;
-	case QAM_64:
-		dprintk("%s() QAM 64\n", __func__);
-		for (i = 0; i < ARRAY_SIZE(QAM64_mod_tab); i++)
-			au8522_writereg(state,
-				QAM64_mod_tab[i].reg,
-				QAM64_mod_tab[i].data);
-		au8522_set_if(fe, state->config->qam_if);
-		break;
-	case QAM_256:
-		dprintk("%s() QAM 256\n", __func__);
-		for (i = 0; i < ARRAY_SIZE(QAM256_mod_tab); i++)
-			au8522_writereg(state,
-				QAM256_mod_tab[i].reg,
-				QAM256_mod_tab[i].data);
-		au8522_set_if(fe, state->config->qam_if);
-		break;
-	default:
-		dprintk("%s() Invalid modulation\n", __func__);
-		return -EINVAL;
-	}
-
-	state->current_modulation = m;
-
-	return 0;
-}
-
-/* Talk to the demod, set the FEC, GUARD, QAM settings etc */
-static int au8522_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct au8522_state *state = fe->demodulator_priv;
-	int ret = -EINVAL;
-
-	dprintk("%s(frequency=%d)\n", __func__, c->frequency);
-
-	if ((state->current_frequency == c->frequency) &&
-	    (state->current_modulation == c->modulation))
-		return 0;
-
-	if (fe->ops.tuner_ops.set_params) {
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 1);
-		ret = fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	if (ret < 0)
-		return ret;
-
-	/* Allow the tuner to settle */
-	msleep(100);
-
-	au8522_enable_modulation(fe, c->modulation);
-
-	state->current_frequency = c->frequency;
-
-	return 0;
-}
-
-static int au8522_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct au8522_state *state = fe->demodulator_priv;
-	u8 reg;
-	u32 tuner_status = 0;
-
-	*status = 0;
-
-	if (state->current_modulation == VSB_8) {
-		dprintk("%s() Checking VSB_8\n", __func__);
-		reg = au8522_readreg(state, 0x4088);
-		if ((reg & 0x03) == 0x03)
-			*status |= FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI;
-	} else {
-		dprintk("%s() Checking QAM\n", __func__);
-		reg = au8522_readreg(state, 0x4541);
-		if (reg & 0x80)
-			*status |= FE_HAS_VITERBI;
-		if (reg & 0x20)
-			*status |= FE_HAS_LOCK | FE_HAS_SYNC;
-	}
-
-	switch (state->config->status_mode) {
-	case AU8522_DEMODLOCKING:
-		dprintk("%s() DEMODLOCKING\n", __func__);
-		if (*status & FE_HAS_VITERBI)
-			*status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
-		break;
-	case AU8522_TUNERLOCKING:
-		/* Get the tuner status */
-		dprintk("%s() TUNERLOCKING\n", __func__);
-		if (fe->ops.tuner_ops.get_status) {
-			if (fe->ops.i2c_gate_ctrl)
-				fe->ops.i2c_gate_ctrl(fe, 1);
-
-			fe->ops.tuner_ops.get_status(fe, &tuner_status);
-
-			if (fe->ops.i2c_gate_ctrl)
-				fe->ops.i2c_gate_ctrl(fe, 0);
-		}
-		if (tuner_status)
-			*status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
-		break;
-	}
-	state->fe_status = *status;
-
-	if (*status & FE_HAS_LOCK)
-		/* turn on LED, if it isn't on already */
-		au8522_led_ctrl(state, -1);
-	else
-		/* turn off LED */
-		au8522_led_ctrl(state, 0);
-
-	dprintk("%s() status 0x%08x\n", __func__, *status);
-
-	return 0;
-}
-
-static int au8522_led_status(struct au8522_state *state, const u16 *snr)
-{
-	struct au8522_led_config *led_config = state->config->led_cfg;
-	int led;
-	u16 strong;
-
-	/* bail out if we can't control an LED */
-	if (!led_config)
-		return 0;
-
-	if (0 == (state->fe_status & FE_HAS_LOCK))
-		return au8522_led_ctrl(state, 0);
-	else if (state->current_modulation == QAM_256)
-		strong = led_config->qam256_strong;
-	else if (state->current_modulation == QAM_64)
-		strong = led_config->qam64_strong;
-	else /* (state->current_modulation == VSB_8) */
-		strong = led_config->vsb8_strong;
-
-	if (*snr >= strong)
-		led = 2;
-	else
-		led = 1;
-
-	if ((state->led_state) &&
-	    (((strong < *snr) ? (*snr - strong) : (strong - *snr)) <= 10))
-		/* snr didn't change enough to bother
-		 * changing the color of the led */
-		return 0;
-
-	return au8522_led_ctrl(state, led);
-}
-
-static int au8522_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct au8522_state *state = fe->demodulator_priv;
-	int ret = -EINVAL;
-
-	dprintk("%s()\n", __func__);
-
-	if (state->current_modulation == QAM_256)
-		ret = au8522_mse2snr_lookup(qam256_mse2snr_tab,
-					    ARRAY_SIZE(qam256_mse2snr_tab),
-					    au8522_readreg(state, 0x4522),
-					    snr);
-	else if (state->current_modulation == QAM_64)
-		ret = au8522_mse2snr_lookup(qam64_mse2snr_tab,
-					    ARRAY_SIZE(qam64_mse2snr_tab),
-					    au8522_readreg(state, 0x4522),
-					    snr);
-	else /* VSB_8 */
-		ret = au8522_mse2snr_lookup(vsb_mse2snr_tab,
-					    ARRAY_SIZE(vsb_mse2snr_tab),
-					    au8522_readreg(state, 0x4311),
-					    snr);
-
-	if (state->config->led_cfg)
-		au8522_led_status(state, snr);
-
-	return ret;
-}
-
-static int au8522_read_signal_strength(struct dvb_frontend *fe,
-				       u16 *signal_strength)
-{
-	/* borrowed from lgdt330x.c
-	 *
-	 * Calculate strength from SNR up to 35dB
-	 * Even though the SNR can go higher than 35dB,
-	 * there is some comfort factor in having a range of
-	 * strong signals that can show at 100%
-	 */
-	u16 snr;
-	u32 tmp;
-	int ret = au8522_read_snr(fe, &snr);
-
-	*signal_strength = 0;
-
-	if (0 == ret) {
-		/* The following calculation method was chosen
-		 * purely for the sake of code re-use from the
-		 * other demod drivers that use this method */
-
-		/* Convert from SNR in dB * 10 to 8.24 fixed-point */
-		tmp = (snr * ((1 << 24) / 10));
-
-		/* Convert from 8.24 fixed-point to
-		 * scale the range 0 - 35*2^24 into 0 - 65535*/
-		if (tmp >= 8960 * 0x10000)
-			*signal_strength = 0xffff;
-		else
-			*signal_strength = tmp / 8960;
-	}
-
-	return ret;
-}
-
-static int au8522_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	struct au8522_state *state = fe->demodulator_priv;
-
-	if (state->current_modulation == VSB_8)
-		*ucblocks = au8522_readreg(state, 0x4087);
-	else
-		*ucblocks = au8522_readreg(state, 0x4543);
-
-	return 0;
-}
-
-static int au8522_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	return au8522_read_ucblocks(fe, ber);
-}
-
-static int au8522_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct au8522_state *state = fe->demodulator_priv;
-
-	c->frequency = state->current_frequency;
-	c->modulation = state->current_modulation;
-
-	return 0;
-}
-
-static int au8522_get_tune_settings(struct dvb_frontend *fe,
-				    struct dvb_frontend_tune_settings *tune)
-{
-	tune->min_delay_ms = 1000;
-	return 0;
-}
-
-static struct dvb_frontend_ops au8522_ops;
-
-
-static void au8522_release(struct dvb_frontend *fe)
-{
-	struct au8522_state *state = fe->demodulator_priv;
-	au8522_release_state(state);
-}
-
-struct dvb_frontend *au8522_attach(const struct au8522_config *config,
-				   struct i2c_adapter *i2c)
-{
-	struct au8522_state *state = NULL;
-	int instance;
-
-	/* allocate memory for the internal state */
-	instance = au8522_get_state(&state, i2c, config->demod_address);
-	switch (instance) {
-	case 0:
-		dprintk("%s state allocation failed\n", __func__);
-		break;
-	case 1:
-		/* new demod instance */
-		dprintk("%s using new instance\n", __func__);
-		break;
-	default:
-		/* existing demod instance */
-		dprintk("%s using existing instance\n", __func__);
-		break;
-	}
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->operational_mode = AU8522_DIGITAL_MODE;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &au8522_ops,
-	       sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-
-	if (au8522_init(&state->frontend) != 0) {
-		printk(KERN_ERR "%s: Failed to initialize correctly\n",
-			__func__);
-		goto error;
-	}
-
-	/* Note: Leaving the I2C gate open here. */
-	au8522_i2c_gate_ctrl(&state->frontend, 1);
-
-	return &state->frontend;
-
-error:
-	au8522_release_state(state);
-	return NULL;
-}
-EXPORT_SYMBOL(au8522_attach);
-
-static struct dvb_frontend_ops au8522_ops = {
-	.delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
-	.info = {
-		.name			= "Auvitek AU8522 QAM/8VSB Frontend",
-		.frequency_min		= 54000000,
-		.frequency_max		= 858000000,
-		.frequency_stepsize	= 62500,
-		.caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
-	},
-
-	.init                 = au8522_init,
-	.sleep                = au8522_sleep,
-	.i2c_gate_ctrl        = au8522_i2c_gate_ctrl,
-	.set_frontend         = au8522_set_frontend,
-	.get_frontend         = au8522_get_frontend,
-	.get_tune_settings    = au8522_get_tune_settings,
-	.read_status          = au8522_read_status,
-	.read_ber             = au8522_read_ber,
-	.read_signal_strength = au8522_read_signal_strength,
-	.read_snr             = au8522_read_snr,
-	.read_ucblocks        = au8522_read_ucblocks,
-	.release              = au8522_release,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Enable verbose debug messages");
-
-MODULE_DESCRIPTION("Auvitek AU8522 QAM-B/ATSC Demodulator driver");
-MODULE_AUTHOR("Steven Toth");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/au8522_priv.h b/drivers/media/dvb/frontends/au8522_priv.h
deleted file mode 100644
index 6e4a438..0000000
--- a/drivers/media/dvb/frontends/au8522_priv.h
+++ /dev/null
@@ -1,423 +0,0 @@
-/*
-    Auvitek AU8522 QAM/8VSB demodulator driver
-
-    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
-    Copyright (C) 2008 Devin Heitmueller <dheitmueller@linuxtv.org>
-    Copyright (C) 2005-2008 Auvitek International, Ltd.
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-device.h>
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-#include "au8522.h"
-#include "tuner-i2c.h"
-
-#define AU8522_ANALOG_MODE 0
-#define AU8522_DIGITAL_MODE 1
-
-struct au8522_state {
-	struct i2c_client *c;
-	struct i2c_adapter *i2c;
-
-	u8 operational_mode;
-
-	/* Used for sharing of the state between analog and digital mode */
-	struct tuner_i2c_props i2c_props;
-	struct list_head hybrid_tuner_instance_list;
-
-	/* configuration settings */
-	const struct au8522_config *config;
-
-	struct dvb_frontend frontend;
-
-	u32 current_frequency;
-	fe_modulation_t current_modulation;
-
-	u32 fe_status;
-	unsigned int led_state;
-
-	/* Analog settings */
-	struct v4l2_subdev sd;
-	v4l2_std_id std;
-	int vid_input;
-	int aud_input;
-	u32 id;
-	u32 rev;
-	u8 brightness;
-	u8 contrast;
-	u8 saturation;
-	s16 hue;
-};
-
-/* These are routines shared by both the VSB/QAM demodulator and the analog
-   decoder */
-int au8522_writereg(struct au8522_state *state, u16 reg, u8 data);
-u8 au8522_readreg(struct au8522_state *state, u16 reg);
-int au8522_init(struct dvb_frontend *fe);
-int au8522_sleep(struct dvb_frontend *fe);
-
-int au8522_get_state(struct au8522_state **state, struct i2c_adapter *i2c,
-		     u8 client_address);
-void au8522_release_state(struct au8522_state *state);
-int au8522_i2c_gate_ctrl(struct dvb_frontend *fe, int enable);
-int au8522_led_ctrl(struct au8522_state *state, int led);
-
-/* REGISTERS */
-#define AU8522_INPUT_CONTROL_REG081H			0x081
-#define AU8522_PGA_CONTROL_REG082H			0x082
-#define AU8522_CLAMPING_CONTROL_REG083H			0x083
-
-#define AU8522_MODULE_CLOCK_CONTROL_REG0A3H		0x0A3
-#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H		0x0A4
-#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H		0x0A5
-#define AU8522_AGC_CONTROL_RANGE_REG0A6H		0x0A6
-#define AU8522_SYSTEM_GAIN_CONTROL_REG0A7H		0x0A7
-#define AU8522_TUNER_AGC_RF_STOP_REG0A8H  		0x0A8
-#define AU8522_TUNER_AGC_RF_START_REG0A9H		0x0A9
-#define AU8522_TUNER_RF_AGC_DEFAULT_REG0AAH		0x0AA
-#define AU8522_TUNER_AGC_IF_STOP_REG0ABH		0x0AB
-#define AU8522_TUNER_AGC_IF_START_REG0ACH		0x0AC
-#define AU8522_TUNER_AGC_IF_DEFAULT_REG0ADH		0x0AD
-#define AU8522_TUNER_AGC_STEP_REG0AEH			0x0AE
-#define AU8522_TUNER_GAIN_STEP_REG0AFH			0x0AF
-
-/* Receiver registers */
-#define AU8522_FRMREGTHRD1_REG0B0H			0x0B0
-#define AU8522_FRMREGAGC1H_REG0B1H 			0x0B1
-#define AU8522_FRMREGSHIFT1_REG0B2H 			0x0B2
-#define AU8522_TOREGAGC1_REG0B3H 			0x0B3
-#define AU8522_TOREGASHIFT1_REG0B4H 			0x0B4
-#define AU8522_FRMREGBBH_REG0B5H			0x0B5
-#define AU8522_FRMREGBBM_REG0B6H 			0x0B6
-#define AU8522_FRMREGBBL_REG0B7H     			0x0B7
-/* 0xB8 TO 0xD7 are the filter coefficients */
-#define AU8522_FRMREGTHRD2_REG0D8H 			0x0D8
-#define AU8522_FRMREGAGC2H_REG0D9H 			0x0D9
-#define AU8522_TOREGAGC2_REG0DAH 			0x0DA
-#define AU8522_TOREGSHIFT2_REG0DBH 			0x0DB
-#define AU8522_FRMREGPILOTH_REG0DCH			0x0DC
-#define AU8522_FRMREGPILOTM_REG0DDH			0x0DD
-#define AU8522_FRMREGPILOTL_REG0DEH			0x0DE
-#define AU8522_TOREGFREQ_REG0DFH			0x0DF
-
-#define AU8522_RX_PGA_RFOUT_REG0EBH			0x0EB
-#define AU8522_RX_PGA_IFOUT_REG0ECH			0x0EC
-#define AU8522_RX_PGA_PGAOUT_REG0EDH			0x0ED
-
-#define AU8522_CHIP_MODE_REG0FEH			0x0FE
-
-/* I2C bus control registers */
-#define AU8522_I2C_CONTROL_REG0_REG090H    		0x090
-#define AU8522_I2C_CONTROL_REG1_REG091H    		0x091
-#define AU8522_I2C_STATUS_REG092H          		0x092
-#define AU8522_I2C_WR_DATA0_REG093H			0x093
-#define AU8522_I2C_WR_DATA1_REG094H			0x094
-#define AU8522_I2C_WR_DATA2_REG095H			0x095
-#define AU8522_I2C_WR_DATA3_REG096H			0x096
-#define AU8522_I2C_WR_DATA4_REG097H			0x097
-#define AU8522_I2C_WR_DATA5_REG098H			0x098
-#define AU8522_I2C_WR_DATA6_REG099H			0x099
-#define AU8522_I2C_WR_DATA7_REG09AH			0x09A
-#define AU8522_I2C_RD_DATA0_REG09BH			0x09B
-#define AU8522_I2C_RD_DATA1_REG09CH			0x09C
-#define AU8522_I2C_RD_DATA2_REG09DH			0x09D
-#define AU8522_I2C_RD_DATA3_REG09EH			0x09E
-#define AU8522_I2C_RD_DATA4_REG09FH			0x09F
-#define AU8522_I2C_RD_DATA5_REG0A0H			0x0A0
-#define AU8522_I2C_RD_DATA6_REG0A1H			0x0A1
-#define AU8522_I2C_RD_DATA7_REG0A2H			0x0A2
-
-#define AU8522_ENA_USB_REG101H				0x101
-
-#define AU8522_I2S_CTRL_0_REG110H  			0x110
-#define AU8522_I2S_CTRL_1_REG111H 			0x111
-#define AU8522_I2S_CTRL_2_REG112H 			0x112
-
-#define AU8522_FRMREGFFECONTROL_REG121H    		0x121
-#define AU8522_FRMREGDFECONTROL_REG122H    		0x122
-
-#define AU8522_CARRFREQOFFSET0_REG201H 			0x201
-#define AU8522_CARRFREQOFFSET1_REG202H			0x202
-
-#define AU8522_DECIMATION_GAIN_REG21AH			0x21A
-#define AU8522_FRMREGIFSLP_REG21BH 			0x21B
-#define AU8522_FRMREGTHRDL2_REG21CH 			0x21C
-#define AU8522_FRMREGSTEP3DB_REG21DH 			0x21D
-#define AU8522_DAGC_GAIN_ADJUSTMENT_REG21EH		0x21E
-#define AU8522_FRMREGPLLMODE_REG21FH 			0x21F
-#define AU8522_FRMREGCSTHRD_REG220H 			0x220
-#define AU8522_FRMREGCRLOCKDMAX_REG221H 		0x221
-#define AU8522_FRMREGCRPERIODMASK_REG222H 		0x222
-#define AU8522_FRMREGCRLOCK0THH_REG223H 		0x223
-#define AU8522_FRMREGCRLOCK1THH_REG224H 		0x224
-#define AU8522_FRMREGCRLOCK0THL_REG225H 		0x225
-#define AU8522_FRMREGCRLOCK1THL_REG226H 		0x226
-#define AU_FRMREGPLLACQPHASESCL_REG227H			0x227
-#define AU8522_FRMREGFREQFBCTRL_REG228H 		0x228
-
-/* Analog TV Decoder */
-#define AU8522_TVDEC_STATUS_REG000H			0x000
-#define AU8522_TVDEC_INT_STATUS_REG001H			0x001
-#define AU8522_TVDEC_MACROVISION_STATUS_REG002H 	0x002
-#define AU8522_TVDEC_SHARPNESSREG009H			0x009
-#define AU8522_TVDEC_BRIGHTNESS_REG00AH			0x00A
-#define AU8522_TVDEC_CONTRAST_REG00BH			0x00B
-#define AU8522_TVDEC_SATURATION_CB_REG00CH		0x00C
-#define AU8522_TVDEC_SATURATION_CR_REG00DH		0x00D
-#define AU8522_TVDEC_HUE_H_REG00EH			0x00E
-#define AU8522_TVDEC_HUE_L_REG00FH                   	0x00F
-#define AU8522_TVDEC_INT_MASK_REG010H			0x010
-#define AU8522_VIDEO_MODE_REG011H			0x011
-#define AU8522_TVDEC_PGA_REG012H			0x012
-#define AU8522_TVDEC_COMB_MODE_REG015H			0x015
-#define AU8522_REG016H                            	0x016
-#define AU8522_TVDED_DBG_MODE_REG060H			0x060
-#define AU8522_TVDEC_FORMAT_CTRL1_REG061H		0x061
-#define AU8522_TVDEC_FORMAT_CTRL2_REG062H		0x062
-#define AU8522_TVDEC_VCR_DET_LLIM_REG063H		0x063
-#define AU8522_TVDEC_VCR_DET_HLIM_REG064H		0x064
-#define AU8522_TVDEC_COMB_VDIF_THR1_REG065H		0x065
-#define AU8522_TVDEC_COMB_VDIF_THR2_REG066H		0x066
-#define AU8522_TVDEC_COMB_VDIF_THR3_REG067H		0x067
-#define AU8522_TVDEC_COMB_NOTCH_THR_REG068H		0x068
-#define AU8522_TVDEC_COMB_HDIF_THR1_REG069H   		0x069
-#define AU8522_TVDEC_COMB_HDIF_THR2_REG06AH		0x06A
-#define AU8522_TVDEC_COMB_HDIF_THR3_REG06BH   		0x06B
-#define AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH  		0x06C
-#define AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH 		0x06D
-#define AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH       	0x06E
-#define AU8522_TVDEC_UV_SEP_THR_REG06FH  		0x06F
-#define AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H		0x070
-#define AU8522_TVDEC_COMB_DC_THR2_NTSC_REG073H		0x073
-#define AU8522_TVDEC_DCAGC_CTRL_REG077H			0x077
-#define AU8522_TVDEC_PIC_START_ADJ_REG078H		0x078
-#define AU8522_TVDEC_AGC_HIGH_LIMIT_REG079H		0x079
-#define AU8522_TVDEC_MACROVISION_SYNC_THR_REG07AH	0x07A
-#define AU8522_TVDEC_INTRP_CTRL_REG07BH			0x07B
-#define AU8522_TVDEC_PLL_STATUS_REG07EH			0x07E
-#define AU8522_TVDEC_FSC_FREQ_REG07FH			0x07F
-
-#define AU8522_TVDEC_AGC_LOW_LIMIT_REG0E4H		0x0E4
-#define AU8522_TOREGAAGC_REG0E5H			0x0E5
-
-#define AU8522_TVDEC_CHROMA_AGC_REG401H		0x401
-#define AU8522_TVDEC_CHROMA_SFT_REG402H		0x402
-#define AU8522_FILTER_COEF_R410     		0x410
-#define AU8522_FILTER_COEF_R411     		0x411
-#define AU8522_FILTER_COEF_R412     		0x412
-#define AU8522_FILTER_COEF_R413     		0x413
-#define AU8522_FILTER_COEF_R414     		0x414
-#define AU8522_FILTER_COEF_R415     		0x415
-#define AU8522_FILTER_COEF_R416     		0x416
-#define AU8522_FILTER_COEF_R417     		0x417
-#define AU8522_FILTER_COEF_R418     		0x418
-#define AU8522_FILTER_COEF_R419     		0x419
-#define AU8522_FILTER_COEF_R41A     		0x41A
-#define AU8522_FILTER_COEF_R41B     		0x41B
-#define AU8522_FILTER_COEF_R41C     		0x41C
-#define AU8522_FILTER_COEF_R41D     		0x41D
-#define AU8522_FILTER_COEF_R41E     		0x41E
-#define AU8522_FILTER_COEF_R41F     		0x41F
-#define AU8522_FILTER_COEF_R420     		0x420
-#define AU8522_FILTER_COEF_R421     		0x421
-#define AU8522_FILTER_COEF_R422     		0x422
-#define AU8522_FILTER_COEF_R423     		0x423
-#define AU8522_FILTER_COEF_R424     		0x424
-#define AU8522_FILTER_COEF_R425     		0x425
-#define AU8522_FILTER_COEF_R426     		0x426
-#define AU8522_FILTER_COEF_R427     		0x427
-#define AU8522_FILTER_COEF_R428     		0x428
-#define AU8522_FILTER_COEF_R429     		0x429
-#define AU8522_FILTER_COEF_R42A     		0x42A
-#define AU8522_FILTER_COEF_R42B     		0x42B
-#define AU8522_FILTER_COEF_R42C     		0x42C
-#define AU8522_FILTER_COEF_R42D     		0x42D
-
-/* VBI Control Registers */
-#define AU8522_TVDEC_VBI_RX_FIFO_CONTAIN_REG004H  	0x004
-#define AU8522_TVDEC_VBI_TX_FIFO_CONTAIN_REG005H  	0x005
-#define AU8522_TVDEC_VBI_RX_FIFO_READ_REG006H      	0x006
-#define AU8522_TVDEC_VBI_FIFO_STATUS_REG007H       	0x007
-#define AU8522_TVDEC_VBI_CTRL_H_REG017H			0x017
-#define AU8522_TVDEC_VBI_CTRL_L_REG018H			0x018
-#define AU8522_TVDEC_VBI_USER_TOTAL_BITS_REG019H	0x019
-#define AU8522_TVDEC_VBI_USER_TUNIT_H_REG01AH		0x01A
-#define AU8522_TVDEC_VBI_USER_TUNIT_L_REG01BH		0x01B
-#define AU8522_TVDEC_VBI_USER_THRESH1_REG01CH		0x01C
-#define AU8522_TVDEC_VBI_USER_FRAME_PAT2_REG01EH	0x01E
-#define AU8522_TVDEC_VBI_USER_FRAME_PAT1_REG01FH   	0x01F
-#define AU8522_TVDEC_VBI_USER_FRAME_PAT0_REG020H   	0x020
-#define AU8522_TVDEC_VBI_USER_FRAME_MASK2_REG021H 	0x021
-#define AU8522_TVDEC_VBI_USER_FRAME_MASK1_REG022H  	0x022
-#define AU8522_TVDEC_VBI_USER_FRAME_MASK0_REG023H	0x023
-
-#define AU8522_REG071H					0x071
-#define AU8522_REG072H					0x072
-#define AU8522_REG074H					0x074
-#define AU8522_REG075H					0x075
-
-/* Digital Demodulator Registers */
-#define AU8522_FRAME_COUNT0_REG084H			0x084
-#define AU8522_RS_STATUS_G0_REG085H			0x085
-#define AU8522_RS_STATUS_B0_REG086H			0x086
-#define AU8522_RS_STATUS_E_REG087H			0x087
-#define AU8522_DEMODULATION_STATUS_REG088H		0x088
-#define AU8522_TOREGTRESTATUS_REG0E6H			0x0E6
-#define AU8522_TSPORT_CONTROL_REG10BH			0x10B
-#define AU8522_TSTHES_REG10CH				0x10C
-#define AU8522_FRMREGDFEKEEP_REG301H			0x301
-#define AU8522_DFE_AVERAGE_REG302H			0x302
-#define AU8522_FRMREGEQLERRWIN_REG303H			0x303
-#define AU8522_FRMREGFFEKEEP_REG304H			0x304
-#define AU8522_FRMREGDFECONTROL1_REG305H		0x305
-#define AU8522_FRMREGEQLERRLOW_REG306H			0x306
-
-#define AU8522_REG42EH				0x42E
-#define AU8522_REG42FH				0x42F
-#define AU8522_REG430H				0x430
-#define AU8522_REG431H				0x431
-#define AU8522_REG432H				0x432
-#define AU8522_REG433H				0x433
-#define AU8522_REG434H				0x434
-#define AU8522_REG435H				0x435
-#define AU8522_REG436H				0x436
-
-/* GPIO Registers */
-#define AU8522_GPIO_CONTROL_REG0E0H			0x0E0
-#define AU8522_GPIO_STATUS_REG0E1H			0x0E1
-#define AU8522_GPIO_DATA_REG0E2H			0x0E2
-
-/* Audio Control Registers */
-#define AU8522_AUDIOAGC_REG0EEH 			0x0EE
-#define AU8522_AUDIO_STATUS_REG0F0H 			0x0F0
-#define AU8522_AUDIO_MODE_REG0F1H 			0x0F1
-#define AU8522_AUDIO_VOLUME_L_REG0F2H 			0x0F2
-#define AU8522_AUDIO_VOLUME_R_REG0F3H 			0x0F3
-#define AU8522_AUDIO_VOLUME_REG0F4H 			0x0F4
-#define AU8522_FRMREGAUPHASE_REG0F7H 			0x0F7
-#define AU8522_REG0F9H					0x0F9
-
-#define AU8522_AUDIOAGC2_REG605H 			0x605
-#define AU8522_AUDIOFREQ_REG606H 			0x606
-
-
-/**************************************************************/
-
-#define AU8522_INPUT_CONTROL_REG081H_ATSC               	0xC4
-#define AU8522_INPUT_CONTROL_REG081H_ATVRF			0xC4
-#define AU8522_INPUT_CONTROL_REG081H_ATVRF13			0xC4
-#define AU8522_INPUT_CONTROL_REG081H_J83B64             	0xC4
-#define AU8522_INPUT_CONTROL_REG081H_J83B256            	0xC4
-#define AU8522_INPUT_CONTROL_REG081H_CVBS               	0x20
-#define AU8522_INPUT_CONTROL_REG081H_CVBS_CH1			0xA2
-#define AU8522_INPUT_CONTROL_REG081H_CVBS_CH2			0xA0
-#define AU8522_INPUT_CONTROL_REG081H_CVBS_CH3			0x69
-#define AU8522_INPUT_CONTROL_REG081H_CVBS_CH4			0x68
-#define AU8522_INPUT_CONTROL_REG081H_CVBS_CH4_SIF        	0x28
-/* CH1 AS Y,CH3 AS C */
-#define AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13        	0x23
-/* CH2 AS Y,CH4 AS C */
-#define AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24        	0x20
-#define AU8522_MODULE_CLOCK_CONTROL_REG0A3H_ATSC        	0x0C
-#define AU8522_MODULE_CLOCK_CONTROL_REG0A3H_J83B64      	0x09
-#define AU8522_MODULE_CLOCK_CONTROL_REG0A3H_J83B256    		0x09
-#define AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS        	0x12
-#define AU8522_MODULE_CLOCK_CONTROL_REG0A3H_ATVRF       	0x1A
-#define AU8522_MODULE_CLOCK_CONTROL_REG0A3H_ATVRF13		0x1A
-#define AU8522_MODULE_CLOCK_CONTROL_REG0A3H_SVIDEO		0x02
-
-#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CLEAR		0x00
-#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_SVIDEO		0x9C
-#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS     	0x9D
-#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_ATSC		0xE8
-#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_J83B256 		0xCA
-#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_J83B64  		0xCA
-#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_ATVRF   		0xDD
-#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_ATVRF13		0xDD
-#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_PAL		0xDD
-#define AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_FM		0xDD
-
-#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_ATSC		0x80
-#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_J83B256 		0x80
-#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_J83B64  		0x80
-#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_DONGLE_ATSC	0x40
-#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_DONGLE_J83B256	0x40
-#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_DONGLE_J83B64	0x40
-#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_DONGLE_CLEAR	0x00
-#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_ATVRF		0x01
-#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_ATVRF13		0x01
-#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_SVIDEO  		0x04
-#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_CVBS		0x01
-#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_PWM     		0x03
-#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_IIS      	0x09
-#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_PAL		0x01
-#define AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H_FM		0x01
-
-/* STILL NEED TO BE REFACTORED @@@@@@@@@@@@@@ */
-#define AU8522_TVDEC_CONTRAST_REG00BH_CVBS			0x79
-#define AU8522_TVDEC_SATURATION_CB_REG00CH_CVBS			0x80
-#define AU8522_TVDEC_SATURATION_CR_REG00DH_CVBS			0x80
-#define AU8522_TVDEC_HUE_H_REG00EH_CVBS				0x00
-#define AU8522_TVDEC_HUE_L_REG00FH_CVBS				0x00
-#define AU8522_TVDEC_PGA_REG012H_CVBS				0x0F
-#define AU8522_TVDEC_COMB_MODE_REG015H_CVBS			0x00
-#define AU8522_REG016H_CVBS					0x00
-#define AU8522_TVDED_DBG_MODE_REG060H_CVBS			0x00
-#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_CVBS			0x0B
-#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_CVBS13		0x03
-#define AU8522_TVDEC_FORMAT_CTRL2_REG062H_CVBS13		0x00
-#define AU8522_TVDEC_VCR_DET_LLIM_REG063H_CVBS			0x19
-#define AU8522_REG0F9H_AUDIO					0x20
-#define AU8522_TVDEC_VCR_DET_HLIM_REG064H_CVBS			0xA7
-#define AU8522_TVDEC_COMB_VDIF_THR1_REG065H_CVBS		0x0A
-#define AU8522_TVDEC_COMB_VDIF_THR2_REG066H_CVBS		0x32
-#define AU8522_TVDEC_COMB_VDIF_THR3_REG067H_CVBS		0x19
-#define AU8522_TVDEC_COMB_NOTCH_THR_REG068H_CVBS		0x23
-#define AU8522_TVDEC_COMB_HDIF_THR1_REG069H_CVBS		0x41
-#define AU8522_TVDEC_COMB_HDIF_THR2_REG06AH_CVBS		0x0A
-#define AU8522_TVDEC_COMB_HDIF_THR3_REG06BH_CVBS		0x32
-#define AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_CVBS		0x34
-#define AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_SVIDEO		0x2a
-#define AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_CVBS		0x05
-#define AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_SVIDEO		0x15
-#define AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH_CVBS		0x6E
-#define AU8522_TVDEC_UV_SEP_THR_REG06FH_CVBS			0x0F
-#define AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H_CVBS		0x80
-#define AU8522_REG071H_CVBS					0x18
-#define AU8522_REG072H_CVBS					0x30
-#define AU8522_TVDEC_COMB_DC_THR2_NTSC_REG073H_CVBS		0xF0
-#define AU8522_REG074H_CVBS					0x80
-#define AU8522_REG075H_CVBS					0xF0
-#define AU8522_TVDEC_DCAGC_CTRL_REG077H_CVBS			0xFB
-#define AU8522_TVDEC_PIC_START_ADJ_REG078H_CVBS			0x04
-#define AU8522_TVDEC_AGC_HIGH_LIMIT_REG079H_CVBS		0x00
-#define AU8522_TVDEC_MACROVISION_SYNC_THR_REG07AH_CVBS		0x00
-#define AU8522_TVDEC_INTRP_CTRL_REG07BH_CVBS			0xEE
-#define AU8522_TVDEC_AGC_LOW_LIMIT_REG0E4H_CVBS			0xFE
-#define AU8522_TOREGAAGC_REG0E5H_CVBS				0x00
-#define AU8522_TVDEC_VBI6A_REG035H_CVBS				0x40
-
-/* Enables Closed captioning */
-#define AU8522_TVDEC_VBI_CTRL_H_REG017H_CCON			0x21
diff --git a/drivers/media/dvb/frontends/bcm3510.c b/drivers/media/dvb/frontends/bcm3510.c
deleted file mode 100644
index 033cd7a..0000000
--- a/drivers/media/dvb/frontends/bcm3510.c
+++ /dev/null
@@ -1,856 +0,0 @@
-/*
- * Support for the Broadcom BCM3510 ATSC demodulator (1st generation Air2PC)
- *
- *  Copyright (C) 2001-5, B2C2 inc.
- *
- *  GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@desy.de>
- *
- *  This driver is "hard-coded" to be used with the 1st generation of
- *  Technisat/B2C2's Air2PC ATSC PCI/USB cards/boxes. The pll-programming
- *  (Panasonic CT10S) is located here, which is actually wrong. Unless there is
- *  another device with a BCM3510, this is no problem.
- *
- *  The driver works also with QAM64 DVB-C, but had an unreasonable high
- *  UNC. (Tested with the Air2PC ATSC 1st generation)
- *
- *  You'll need a firmware for this driver in order to get it running. It is
- *  called "dvb-fe-bcm3510-01.fw".
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 675 Mass
- * Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/jiffies.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-
-#include "dvb_frontend.h"
-#include "bcm3510.h"
-#include "bcm3510_priv.h"
-
-struct bcm3510_state {
-
-	struct i2c_adapter* i2c;
-	const struct bcm3510_config* config;
-	struct dvb_frontend frontend;
-
-	/* demodulator private data */
-	struct mutex hab_mutex;
-	u8 firmware_loaded:1;
-
-	unsigned long next_status_check;
-	unsigned long status_check_interval;
-	struct bcm3510_hab_cmd_status1 status1;
-	struct bcm3510_hab_cmd_status2 status2;
-};
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,2=i2c (|-able)).");
-
-#define dprintk(level,x...) if (level & debug) printk(x)
-#define dbufout(b,l,m) {\
-	    int i; \
-	    for (i = 0; i < l; i++) \
-		m("%02x ",b[i]); \
-}
-#define deb_info(args...) dprintk(0x01,args)
-#define deb_i2c(args...)  dprintk(0x02,args)
-#define deb_hab(args...)  dprintk(0x04,args)
-
-/* transfer functions */
-static int bcm3510_writebytes (struct bcm3510_state *state, u8 reg, u8 *buf, u8 len)
-{
-	u8 b[256];
-	int err;
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = b, .len = len + 1 };
-
-	b[0] = reg;
-	memcpy(&b[1],buf,len);
-
-	deb_i2c("i2c wr %02x: ",reg);
-	dbufout(buf,len,deb_i2c);
-	deb_i2c("\n");
-
-	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-
-		deb_info("%s: i2c write error (addr %02x, reg %02x, err == %i)\n",
-			__func__, state->config->demod_address, reg,  err);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int bcm3510_readbytes (struct bcm3510_state *state, u8 reg, u8 *buf, u8 len)
-{
-	struct i2c_msg msg[] = {
-		{ .addr = state->config->demod_address, .flags = 0,        .buf = &reg, .len = 1 },
-		{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf,  .len = len }
-	};
-	int err;
-
-	memset(buf,0,len);
-
-	if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) {
-		deb_info("%s: i2c read error (addr %02x, reg %02x, err == %i)\n",
-			__func__, state->config->demod_address, reg,  err);
-		return -EREMOTEIO;
-	}
-	deb_i2c("i2c rd %02x: ",reg);
-	dbufout(buf,len,deb_i2c);
-	deb_i2c("\n");
-
-	return 0;
-}
-
-static int bcm3510_writeB(struct bcm3510_state *state, u8 reg, bcm3510_register_value v)
-{
-	return bcm3510_writebytes(state,reg,&v.raw,1);
-}
-
-static int bcm3510_readB(struct bcm3510_state *state, u8 reg, bcm3510_register_value *v)
-{
-	return bcm3510_readbytes(state,reg,&v->raw,1);
-}
-
-/* Host Access Buffer transfers */
-static int bcm3510_hab_get_response(struct bcm3510_state *st, u8 *buf, int len)
-{
-	bcm3510_register_value v;
-	int ret,i;
-
-	v.HABADR_a6.HABADR = 0;
-	if ((ret = bcm3510_writeB(st,0xa6,v)) < 0)
-		return ret;
-
-	for (i = 0; i < len; i++) {
-		if ((ret = bcm3510_readB(st,0xa7,&v)) < 0)
-			return ret;
-		buf[i] = v.HABDATA_a7;
-	}
-	return 0;
-}
-
-static int bcm3510_hab_send_request(struct bcm3510_state *st, u8 *buf, int len)
-{
-	bcm3510_register_value v,hab;
-	int ret,i;
-	unsigned long t;
-
-/* Check if any previous HAB request still needs to be serviced by the
- * Acquisition Processor before sending new request */
-	if ((ret = bcm3510_readB(st,0xa8,&v)) < 0)
-		return ret;
-	if (v.HABSTAT_a8.HABR) {
-		deb_info("HAB is running already - clearing it.\n");
-		v.HABSTAT_a8.HABR = 0;
-		bcm3510_writeB(st,0xa8,v);
-//		return -EBUSY;
-	}
-
-/* Send the start HAB Address (automatically incremented after write of
- * HABDATA) and write the HAB Data */
-	hab.HABADR_a6.HABADR = 0;
-	if ((ret = bcm3510_writeB(st,0xa6,hab)) < 0)
-		return ret;
-
-	for (i = 0; i < len; i++) {
-		hab.HABDATA_a7 = buf[i];
-		if ((ret = bcm3510_writeB(st,0xa7,hab)) < 0)
-			return ret;
-	}
-
-/* Set the HABR bit to indicate AP request in progress (LBHABR allows HABR to
- * be written) */
-	v.raw = 0; v.HABSTAT_a8.HABR = 1; v.HABSTAT_a8.LDHABR = 1;
-	if ((ret = bcm3510_writeB(st,0xa8,v)) < 0)
-		return ret;
-
-/* Polling method: Wait until the AP finishes processing the HAB request */
-	t = jiffies + 1*HZ;
-	while (time_before(jiffies, t)) {
-		deb_info("waiting for HAB to complete\n");
-		msleep(10);
-		if ((ret = bcm3510_readB(st,0xa8,&v)) < 0)
-			return ret;
-
-		if (!v.HABSTAT_a8.HABR)
-			return 0;
-	}
-
-	deb_info("send_request execution timed out.\n");
-	return -ETIMEDOUT;
-}
-
-static int bcm3510_do_hab_cmd(struct bcm3510_state *st, u8 cmd, u8 msgid, u8 *obuf, u8 olen, u8 *ibuf, u8 ilen)
-{
-	u8 ob[olen+2],ib[ilen+2];
-	int ret = 0;
-
-	ob[0] = cmd;
-	ob[1] = msgid;
-	memcpy(&ob[2],obuf,olen);
-
-	deb_hab("hab snd: ");
-	dbufout(ob,olen+2,deb_hab);
-	deb_hab("\n");
-
-	if (mutex_lock_interruptible(&st->hab_mutex) < 0)
-		return -EAGAIN;
-
-	if ((ret = bcm3510_hab_send_request(st, ob, olen+2)) < 0 ||
-		(ret = bcm3510_hab_get_response(st, ib, ilen+2)) < 0)
-		goto error;
-
-	deb_hab("hab get: ");
-	dbufout(ib,ilen+2,deb_hab);
-	deb_hab("\n");
-
-	memcpy(ibuf,&ib[2],ilen);
-error:
-	mutex_unlock(&st->hab_mutex);
-	return ret;
-}
-
-#if 0
-/* not needed, we use a semaphore to prevent HAB races */
-static int bcm3510_is_ap_ready(struct bcm3510_state *st)
-{
-	bcm3510_register_value ap,hab;
-	int ret;
-
-	if ((ret = bcm3510_readB(st,0xa8,&hab)) < 0 ||
-		(ret = bcm3510_readB(st,0xa2,&ap) < 0))
-		return ret;
-
-	if (ap.APSTAT1_a2.RESET || ap.APSTAT1_a2.IDLE || ap.APSTAT1_a2.STOP || hab.HABSTAT_a8.HABR) {
-		deb_info("AP is busy\n");
-		return -EBUSY;
-	}
-
-	return 0;
-}
-#endif
-
-static int bcm3510_bert_reset(struct bcm3510_state *st)
-{
-	bcm3510_register_value b;
-	int ret;
-
-	if ((ret = bcm3510_readB(st,0xfa,&b)) < 0)
-		return ret;
-
-	b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b);
-	b.BERCTL_fa.RESYNC = 1; bcm3510_writeB(st,0xfa,b);
-	b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b);
-	b.BERCTL_fa.CNTCTL = 1; b.BERCTL_fa.BITCNT = 1; bcm3510_writeB(st,0xfa,b);
-
-	/* clear residual bit counter TODO  */
-	return 0;
-}
-
-static int bcm3510_refresh_state(struct bcm3510_state *st)
-{
-	if (time_after(jiffies,st->next_status_check)) {
-		bcm3510_do_hab_cmd(st, CMD_STATUS, MSGID_STATUS1, NULL,0, (u8 *)&st->status1, sizeof(st->status1));
-		bcm3510_do_hab_cmd(st, CMD_STATUS, MSGID_STATUS2, NULL,0, (u8 *)&st->status2, sizeof(st->status2));
-		st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000;
-	}
-	return 0;
-}
-
-static int bcm3510_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct bcm3510_state* st = fe->demodulator_priv;
-	bcm3510_refresh_state(st);
-
-	*status = 0;
-	if (st->status1.STATUS1.RECEIVER_LOCK)
-		*status |= FE_HAS_LOCK | FE_HAS_SYNC;
-
-	if (st->status1.STATUS1.FEC_LOCK)
-		*status |= FE_HAS_VITERBI;
-
-	if (st->status1.STATUS1.OUT_PLL_LOCK)
-		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER;
-
-	if (*status & FE_HAS_LOCK)
-		st->status_check_interval = 1500;
-	else /* more frequently checks if no lock has been achieved yet */
-		st->status_check_interval = 500;
-
-	deb_info("real_status: %02x\n",*status);
-	return 0;
-}
-
-static int bcm3510_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct bcm3510_state* st = fe->demodulator_priv;
-	bcm3510_refresh_state(st);
-
-	*ber = (st->status2.LDBER0 << 16) | (st->status2.LDBER1 << 8) | st->status2.LDBER2;
-	return 0;
-}
-
-static int bcm3510_read_unc(struct dvb_frontend* fe, u32* unc)
-{
-	struct bcm3510_state* st = fe->demodulator_priv;
-	bcm3510_refresh_state(st);
-	*unc = (st->status2.LDUERC0 << 8) | st->status2.LDUERC1;
-	return 0;
-}
-
-static int bcm3510_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	struct bcm3510_state* st = fe->demodulator_priv;
-	s32 t;
-
-	bcm3510_refresh_state(st);
-	t = st->status2.SIGNAL;
-
-	if (t > 190)
-		t = 190;
-	if (t < 90)
-		t = 90;
-
-	t -= 90;
-	t = t * 0xff / 100;
-	/* normalize if necessary */
-	*strength = (t << 8) | t;
-	return 0;
-}
-
-static int bcm3510_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct bcm3510_state* st = fe->demodulator_priv;
-	bcm3510_refresh_state(st);
-
-	*snr = st->status1.SNR_EST0*1000 + ((st->status1.SNR_EST1*1000) >> 8);
-	return 0;
-}
-
-/* tuner frontend programming */
-static int bcm3510_tuner_cmd(struct bcm3510_state* st,u8 bc, u16 n, u8 a)
-{
-	struct bcm3510_hab_cmd_tune c;
-	memset(&c,0,sizeof(struct bcm3510_hab_cmd_tune));
-
-/* I2C Mode disabled,  set 16 control / Data pairs */
-	c.length = 0x10;
-	c.clock_width = 0;
-/* CS1, CS0, DATA, CLK bits control the tuner RF_AGC_SEL pin is set to
- * logic high (as Configuration) */
-	c.misc = 0x10;
-/* Set duration of the initial state of TUNCTL = 3.34 micro Sec */
-	c.TUNCTL_state = 0x40;
-
-/* PRESCALER DIVIDE RATIO | BC1_2_3_4; (band switch), 1stosc REFERENCE COUNTER REF_S12 and REF_S11 */
-	c.ctl_dat[0].ctrl.size = BITS_8;
-	c.ctl_dat[0].data      = 0x80 | bc;
-
-/* Control DATA pin, 1stosc REFERENCE COUNTER REF_S10 to REF_S3 */
-	c.ctl_dat[1].ctrl.size = BITS_8;
-	c.ctl_dat[1].data      = 4;
-
-/* set CONTROL BIT 1 to 1, 1stosc REFERENCE COUNTER REF_S2 to REF_S1 */
-	c.ctl_dat[2].ctrl.size = BITS_3;
-	c.ctl_dat[2].data      = 0x20;
-
-/* control CS0 pin, pulse byte ? */
-	c.ctl_dat[3].ctrl.size = BITS_3;
-	c.ctl_dat[3].ctrl.clk_off = 1;
-	c.ctl_dat[3].ctrl.cs0  = 1;
-	c.ctl_dat[3].data      = 0x40;
-
-/* PGM_S18 to PGM_S11 */
-	c.ctl_dat[4].ctrl.size = BITS_8;
-	c.ctl_dat[4].data      = n >> 3;
-
-/* PGM_S10 to PGM_S8, SWL_S7 to SWL_S3 */
-	c.ctl_dat[5].ctrl.size = BITS_8;
-	c.ctl_dat[5].data      = ((n & 0x7) << 5) | (a >> 2);
-
-/* SWL_S2 and SWL_S1, set CONTROL BIT 2 to 0 */
-	c.ctl_dat[6].ctrl.size = BITS_3;
-	c.ctl_dat[6].data      = (a << 6) & 0xdf;
-
-/* control CS0 pin, pulse byte ? */
-	c.ctl_dat[7].ctrl.size = BITS_3;
-	c.ctl_dat[7].ctrl.clk_off = 1;
-	c.ctl_dat[7].ctrl.cs0  = 1;
-	c.ctl_dat[7].data      = 0x40;
-
-/* PRESCALER DIVIDE RATIO, 2ndosc REFERENCE COUNTER REF_S12 and REF_S11 */
-	c.ctl_dat[8].ctrl.size = BITS_8;
-	c.ctl_dat[8].data      = 0x80;
-
-/* 2ndosc REFERENCE COUNTER REF_S10 to REF_S3 */
-	c.ctl_dat[9].ctrl.size = BITS_8;
-	c.ctl_dat[9].data      = 0x10;
-
-/* set CONTROL BIT 1 to 1, 2ndosc REFERENCE COUNTER REF_S2 to REF_S1 */
-	c.ctl_dat[10].ctrl.size = BITS_3;
-	c.ctl_dat[10].data      = 0x20;
-
-/* pulse byte */
-	c.ctl_dat[11].ctrl.size = BITS_3;
-	c.ctl_dat[11].ctrl.clk_off = 1;
-	c.ctl_dat[11].ctrl.cs1  = 1;
-	c.ctl_dat[11].data      = 0x40;
-
-/* PGM_S18 to PGM_S11 */
-	c.ctl_dat[12].ctrl.size = BITS_8;
-	c.ctl_dat[12].data      = 0x2a;
-
-/* PGM_S10 to PGM_S8 and SWL_S7 to SWL_S3 */
-	c.ctl_dat[13].ctrl.size = BITS_8;
-	c.ctl_dat[13].data      = 0x8e;
-
-/* SWL_S2 and SWL_S1 and set CONTROL BIT 2 to 0 */
-	c.ctl_dat[14].ctrl.size = BITS_3;
-	c.ctl_dat[14].data      = 0;
-
-/* Pulse Byte */
-	c.ctl_dat[15].ctrl.size = BITS_3;
-	c.ctl_dat[15].ctrl.clk_off = 1;
-	c.ctl_dat[15].ctrl.cs1  = 1;
-	c.ctl_dat[15].data      = 0x40;
-
-	return bcm3510_do_hab_cmd(st,CMD_TUNE, MSGID_TUNE,(u8 *) &c,sizeof(c), NULL, 0);
-}
-
-static int bcm3510_set_freq(struct bcm3510_state* st,u32 freq)
-{
-	u8 bc,a;
-	u16 n;
-	s32 YIntercept,Tfvco1;
-
-	freq /= 1000;
-
-	deb_info("%dkHz:",freq);
-	/* set Band Switch */
-	if (freq <= 168000)
-		bc = 0x1c;
-	else if (freq <= 378000)
-		bc = 0x2c;
-	else
-		bc = 0x30;
-
-	if (freq >= 470000) {
-		freq -= 470001;
-		YIntercept = 18805;
-	} else if (freq >= 90000) {
-		freq -= 90001;
-		YIntercept = 15005;
-	} else if (freq >= 76000){
-		freq -= 76001;
-		YIntercept = 14865;
-	} else {
-		freq -= 54001;
-		YIntercept = 14645;
-	}
-
-	Tfvco1 = (((freq/6000)*60 + YIntercept)*4)/10;
-
-	n = Tfvco1 >> 6;
-	a = Tfvco1 & 0x3f;
-
-	deb_info(" BC1_2_3_4: %x, N: %x A: %x\n", bc, n, a);
-	if (n >= 16 && n <= 2047)
-		return bcm3510_tuner_cmd(st,bc,n,a);
-
-	return -EINVAL;
-}
-
-static int bcm3510_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct bcm3510_state* st = fe->demodulator_priv;
-	struct bcm3510_hab_cmd_ext_acquire cmd;
-	struct bcm3510_hab_cmd_bert_control bert;
-	int ret;
-
-	memset(&cmd,0,sizeof(cmd));
-	switch (c->modulation) {
-		case QAM_256:
-			cmd.ACQUIRE0.MODE = 0x1;
-			cmd.ACQUIRE1.SYM_RATE = 0x1;
-			cmd.ACQUIRE1.IF_FREQ = 0x1;
-			break;
-		case QAM_64:
-			cmd.ACQUIRE0.MODE = 0x2;
-			cmd.ACQUIRE1.SYM_RATE = 0x2;
-			cmd.ACQUIRE1.IF_FREQ = 0x1;
-			break;
-#if 0
-		case QAM_256:
-			cmd.ACQUIRE0.MODE = 0x3;
-			break;
-		case QAM_128:
-			cmd.ACQUIRE0.MODE = 0x4;
-			break;
-		case QAM_64:
-			cmd.ACQUIRE0.MODE = 0x5;
-			break;
-		case QAM_32:
-			cmd.ACQUIRE0.MODE = 0x6;
-			break;
-		case QAM_16:
-			cmd.ACQUIRE0.MODE = 0x7;
-			break;
-#endif
-		case VSB_8:
-			cmd.ACQUIRE0.MODE = 0x8;
-			cmd.ACQUIRE1.SYM_RATE = 0x0;
-			cmd.ACQUIRE1.IF_FREQ = 0x0;
-			break;
-		case VSB_16:
-			cmd.ACQUIRE0.MODE = 0x9;
-			cmd.ACQUIRE1.SYM_RATE = 0x0;
-			cmd.ACQUIRE1.IF_FREQ = 0x0;
-		default:
-			return -EINVAL;
-	};
-	cmd.ACQUIRE0.OFFSET = 0;
-	cmd.ACQUIRE0.NTSCSWEEP = 1;
-	cmd.ACQUIRE0.FA = 1;
-	cmd.ACQUIRE0.BW = 0;
-
-/*	if (enableOffset) {
-		cmd.IF_OFFSET0 = xx;
-		cmd.IF_OFFSET1 = xx;
-
-		cmd.SYM_OFFSET0 = xx;
-		cmd.SYM_OFFSET1 = xx;
-		if (enableNtscSweep) {
-			cmd.NTSC_OFFSET0;
-			cmd.NTSC_OFFSET1;
-		}
-	} */
-	bcm3510_do_hab_cmd(st, CMD_ACQUIRE, MSGID_EXT_TUNER_ACQUIRE, (u8 *) &cmd, sizeof(cmd), NULL, 0);
-
-/* doing it with different MSGIDs, data book and source differs */
-	bert.BE = 0;
-	bert.unused = 0;
-	bcm3510_do_hab_cmd(st, CMD_STATE_CONTROL, MSGID_BERT_CONTROL, (u8 *) &bert, sizeof(bert), NULL, 0);
-	bcm3510_do_hab_cmd(st, CMD_STATE_CONTROL, MSGID_BERT_SET, (u8 *) &bert, sizeof(bert), NULL, 0);
-
-	bcm3510_bert_reset(st);
-
-	ret = bcm3510_set_freq(st, c->frequency);
-	if (ret < 0)
-		return ret;
-
-	memset(&st->status1,0,sizeof(st->status1));
-	memset(&st->status2,0,sizeof(st->status2));
-	st->status_check_interval = 500;
-
-/* Give the AP some time */
-	msleep(200);
-
-	return 0;
-}
-
-static int bcm3510_sleep(struct dvb_frontend* fe)
-{
-	return 0;
-}
-
-static int bcm3510_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *s)
-{
-	s->min_delay_ms = 1000;
-	s->step_size = 0;
-	s->max_drift = 0;
-	return 0;
-}
-
-static void bcm3510_release(struct dvb_frontend* fe)
-{
-	struct bcm3510_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-/* firmware download:
- * firmware file is build up like this:
- * 16bit addr, 16bit length, 8byte of length
- */
-#define BCM3510_DEFAULT_FIRMWARE "dvb-fe-bcm3510-01.fw"
-
-static int bcm3510_write_ram(struct bcm3510_state *st, u16 addr, const u8 *b,
-			     u16 len)
-{
-	int ret = 0,i;
-	bcm3510_register_value vH, vL,vD;
-
-	vH.MADRH_a9 = addr >> 8;
-	vL.MADRL_aa = addr;
-	if ((ret = bcm3510_writeB(st,0xa9,vH)) < 0) return ret;
-	if ((ret = bcm3510_writeB(st,0xaa,vL)) < 0) return ret;
-
-	for (i = 0; i < len; i++) {
-		vD.MDATA_ab = b[i];
-		if ((ret = bcm3510_writeB(st,0xab,vD)) < 0)
-			return ret;
-	}
-
-	return 0;
-}
-
-static int bcm3510_download_firmware(struct dvb_frontend* fe)
-{
-	struct bcm3510_state* st = fe->demodulator_priv;
-	const struct firmware *fw;
-	u16 addr,len;
-	const u8 *b;
-	int ret,i;
-
-	deb_info("requesting firmware\n");
-	if ((ret = st->config->request_firmware(fe, &fw, BCM3510_DEFAULT_FIRMWARE)) < 0) {
-		err("could not load firmware (%s): %d",BCM3510_DEFAULT_FIRMWARE,ret);
-		return ret;
-	}
-	deb_info("got firmware: %zd\n",fw->size);
-
-	b = fw->data;
-	for (i = 0; i < fw->size;) {
-		addr = le16_to_cpu( *( (u16 *)&b[i] ) );
-		len  = le16_to_cpu( *( (u16 *)&b[i+2] ) );
-		deb_info("firmware chunk, addr: 0x%04x, len: 0x%04x, total length: 0x%04zx\n",addr,len,fw->size);
-		if ((ret = bcm3510_write_ram(st,addr,&b[i+4],len)) < 0) {
-			err("firmware download failed: %d\n",ret);
-			return ret;
-		}
-		i += 4 + len;
-	}
-	release_firmware(fw);
-	deb_info("firmware download successfully completed\n");
-	return 0;
-}
-
-static int bcm3510_check_firmware_version(struct bcm3510_state *st)
-{
-	struct bcm3510_hab_cmd_get_version_info ver;
-	bcm3510_do_hab_cmd(st,CMD_GET_VERSION_INFO,MSGID_GET_VERSION_INFO,NULL,0,(u8*)&ver,sizeof(ver));
-
-	deb_info("Version information: 0x%02x 0x%02x 0x%02x 0x%02x\n",
-		ver.microcode_version, ver.script_version, ver.config_version, ver.demod_version);
-
-	if (ver.script_version == BCM3510_DEF_SCRIPT_VERSION &&
-		ver.config_version == BCM3510_DEF_CONFIG_VERSION &&
-		ver.demod_version  == BCM3510_DEF_DEMOD_VERSION)
-		return 0;
-
-	deb_info("version check failed\n");
-	return -ENODEV;
-}
-
-/* (un)resetting the AP */
-static int bcm3510_reset(struct bcm3510_state *st)
-{
-	int ret;
-	unsigned long  t;
-	bcm3510_register_value v;
-
-	bcm3510_readB(st,0xa0,&v); v.HCTL1_a0.RESET = 1;
-	if ((ret = bcm3510_writeB(st,0xa0,v)) < 0)
-		return ret;
-
-    t = jiffies + 3*HZ;
-	while (time_before(jiffies, t)) {
-		msleep(10);
-		if ((ret = bcm3510_readB(st,0xa2,&v)) < 0)
-			return ret;
-
-		if (v.APSTAT1_a2.RESET)
-			return 0;
-	}
-	deb_info("reset timed out\n");
-	return -ETIMEDOUT;
-}
-
-static int bcm3510_clear_reset(struct bcm3510_state *st)
-{
-	bcm3510_register_value v;
-	int ret;
-	unsigned long t;
-
-	v.raw = 0;
-	if ((ret = bcm3510_writeB(st,0xa0,v)) < 0)
-		return ret;
-
-    t = jiffies + 3*HZ;
-	while (time_before(jiffies, t)) {
-		msleep(10);
-		if ((ret = bcm3510_readB(st,0xa2,&v)) < 0)
-			return ret;
-
-		/* verify that reset is cleared */
-		if (!v.APSTAT1_a2.RESET)
-			return 0;
-	}
-	deb_info("reset clear timed out\n");
-	return -ETIMEDOUT;
-}
-
-static int bcm3510_init_cold(struct bcm3510_state *st)
-{
-	int ret;
-	bcm3510_register_value v;
-
-	/* read Acquisation Processor status register and check it is not in RUN mode */
-	if ((ret = bcm3510_readB(st,0xa2,&v)) < 0)
-		return ret;
-	if (v.APSTAT1_a2.RUN) {
-		deb_info("AP is already running - firmware already loaded.\n");
-		return 0;
-	}
-
-	deb_info("reset?\n");
-	if ((ret = bcm3510_reset(st)) < 0)
-		return ret;
-
-	deb_info("tristate?\n");
-	/* tri-state */
-	v.TSTCTL_2e.CTL = 0;
-	if ((ret = bcm3510_writeB(st,0x2e,v)) < 0)
-		return ret;
-
-	deb_info("firmware?\n");
-	if ((ret = bcm3510_download_firmware(&st->frontend)) < 0 ||
-		(ret = bcm3510_clear_reset(st)) < 0)
-		return ret;
-
-	/* anything left here to Let the acquisition processor begin execution at program counter 0000 ??? */
-
-	return 0;
-}
-
-static int bcm3510_init(struct dvb_frontend* fe)
-{
-	struct bcm3510_state* st = fe->demodulator_priv;
-	bcm3510_register_value j;
-	struct bcm3510_hab_cmd_set_agc c;
-	int ret;
-
-	if ((ret = bcm3510_readB(st,0xca,&j)) < 0)
-		return ret;
-
-	deb_info("JDEC: %02x\n",j.raw);
-
-	switch (j.JDEC_ca.JDEC) {
-		case JDEC_WAIT_AT_RAM:
-			deb_info("attempting to download firmware\n");
-			if ((ret = bcm3510_init_cold(st)) < 0)
-				return ret;
-		case JDEC_EEPROM_LOAD_WAIT: /* fall-through is wanted */
-			deb_info("firmware is loaded\n");
-			bcm3510_check_firmware_version(st);
-			break;
-		default:
-			return -ENODEV;
-	}
-
-	memset(&c,0,1);
-	c.SEL = 1;
-	bcm3510_do_hab_cmd(st,CMD_AUTO_PARAM,MSGID_SET_RF_AGC_SEL,(u8 *)&c,sizeof(c),NULL,0);
-
-	return 0;
-}
-
-
-static struct dvb_frontend_ops bcm3510_ops;
-
-struct dvb_frontend* bcm3510_attach(const struct bcm3510_config *config,
-				   struct i2c_adapter *i2c)
-{
-	struct bcm3510_state* state = NULL;
-	int ret;
-	bcm3510_register_value v;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct bcm3510_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-
-	state->config = config;
-	state->i2c = i2c;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &bcm3510_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-
-	mutex_init(&state->hab_mutex);
-
-	if ((ret = bcm3510_readB(state,0xe0,&v)) < 0)
-		goto error;
-
-	deb_info("Revision: 0x%1x, Layer: 0x%1x.\n",v.REVID_e0.REV,v.REVID_e0.LAYER);
-
-	if ((v.REVID_e0.REV != 0x1 && v.REVID_e0.LAYER != 0xb) && /* cold */
-		(v.REVID_e0.REV != 0x8 && v.REVID_e0.LAYER != 0x0))   /* warm */
-		goto error;
-
-	info("Revision: 0x%1x, Layer: 0x%1x.",v.REVID_e0.REV,v.REVID_e0.LAYER);
-
-	bcm3510_reset(state);
-
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(bcm3510_attach);
-
-static struct dvb_frontend_ops bcm3510_ops = {
-	.delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
-	.info = {
-		.name = "Broadcom BCM3510 VSB/QAM frontend",
-		.frequency_min =  54000000,
-		.frequency_max = 803000000,
-		/* stepsize is just a guess */
-		.frequency_stepsize = 0,
-		.caps =
-			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_8VSB | FE_CAN_16VSB |
-			FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_128 | FE_CAN_QAM_256
-	},
-
-	.release = bcm3510_release,
-
-	.init = bcm3510_init,
-	.sleep = bcm3510_sleep,
-
-	.set_frontend = bcm3510_set_frontend,
-	.get_tune_settings = bcm3510_get_tune_settings,
-
-	.read_status = bcm3510_read_status,
-	.read_ber = bcm3510_read_ber,
-	.read_signal_strength = bcm3510_read_signal_strength,
-	.read_snr = bcm3510_read_snr,
-	.read_ucblocks = bcm3510_read_unc,
-};
-
-MODULE_DESCRIPTION("Broadcom BCM3510 ATSC (8VSB/16VSB & ITU J83 AnnexB FEC QAM64/256) demodulator driver");
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/bcm3510.h b/drivers/media/dvb/frontends/bcm3510.h
deleted file mode 100644
index f4575c0..0000000
--- a/drivers/media/dvb/frontends/bcm3510.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Support for the Broadcom BCM3510 ATSC demodulator (1st generation Air2PC)
- *
- *  Copyright (C) 2001-5, B2C2 inc.
- *
- *  GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@desy.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef BCM3510_H
-#define BCM3510_H
-
-#include <linux/dvb/frontend.h>
-#include <linux/firmware.h>
-
-struct bcm3510_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* request firmware for device */
-	int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
-};
-
-#if defined(CONFIG_DVB_BCM3510) || (defined(CONFIG_DVB_BCM3510_MODULE) && defined(MODULE))
-extern struct dvb_frontend* bcm3510_attach(const struct bcm3510_config* config,
-					   struct i2c_adapter* i2c);
-#else
-static inline struct dvb_frontend* bcm3510_attach(const struct bcm3510_config* config,
-						  struct i2c_adapter* i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_BCM3510
-
-#endif
diff --git a/drivers/media/dvb/frontends/bcm3510_priv.h b/drivers/media/dvb/frontends/bcm3510_priv.h
deleted file mode 100644
index 3bb1bc2..0000000
--- a/drivers/media/dvb/frontends/bcm3510_priv.h
+++ /dev/null
@@ -1,460 +0,0 @@
-/*
- * Support for the Broadcom BCM3510 ATSC demodulator (1st generation Air2PC)
- *
- *  Copyright (C) 2001-5, B2C2 inc.
- *
- *  GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@desy.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __BCM3510_PRIV_H__
-#define __BCM3510_PRIV_H__
-
-#define PACKED __attribute__((packed))
-
-#undef err
-#define err(format, arg...)  printk(KERN_ERR     "bcm3510: " format "\n" , ## arg)
-#undef info
-#define info(format, arg...) printk(KERN_INFO    "bcm3510: " format "\n" , ## arg)
-#undef warn
-#define warn(format, arg...) printk(KERN_WARNING "bcm3510: " format "\n" , ## arg)
-
-
-#define PANASONIC_FIRST_IF_BASE_IN_KHz  1407500
-#define BCM3510_SYMBOL_RATE             5381000
-
-typedef union {
-	u8 raw;
-
-	struct {
-		u8 CTL   :8;
-	} TSTCTL_2e;
-
-	u8 LDCERC_4e;
-	u8 LDUERC_4f;
-	u8 LD_BER0_65;
-	u8 LD_BER1_66;
-	u8 LD_BER2_67;
-	u8 LD_BER3_68;
-
-	struct {
-		u8 RESET :1;
-		u8 IDLE  :1;
-		u8 STOP  :1;
-		u8 HIRQ0 :1;
-		u8 HIRQ1 :1;
-		u8 na0   :1;
-		u8 HABAV :1;
-		u8 na1   :1;
-	} HCTL1_a0;
-
-	struct {
-		u8 na0    :1;
-		u8 IDLMSK :1;
-		u8 STMSK  :1;
-		u8 I0MSK  :1;
-		u8 I1MSK  :1;
-		u8 na1    :1;
-		u8 HABMSK :1;
-		u8 na2    :1;
-	} HCTLMSK_a1;
-
-	struct {
-		u8 RESET  :1;
-		u8 IDLE   :1;
-		u8 STOP   :1;
-		u8 RUN    :1;
-		u8 HABAV  :1;
-		u8 MEMAV  :1;
-		u8 ALDONE :1;
-		u8 REIRQ  :1;
-	} APSTAT1_a2;
-
-	struct {
-		u8 RSTMSK :1;
-		u8 IMSK   :1;
-		u8 SMSK   :1;
-		u8 RMSK   :1;
-		u8 HABMSK :1;
-		u8 MAVMSK :1;
-		u8 ALDMSK :1;
-		u8 REMSK  :1;
-	} APMSK1_a3;
-
-	u8 APSTAT2_a4;
-	u8 APMSK2_a5;
-
-	struct {
-		u8 HABADR :7;
-		u8 na     :1;
-	} HABADR_a6;
-
-	u8 HABDATA_a7;
-
-	struct {
-		u8 HABR   :1;
-		u8 LDHABR :1;
-		u8 APMSK  :1;
-		u8 HMSK   :1;
-		u8 LDMSK  :1;
-		u8 na     :3;
-	} HABSTAT_a8;
-
-	u8 MADRH_a9;
-	u8 MADRL_aa;
-	u8 MDATA_ab;
-
-	struct {
-#define JDEC_WAIT_AT_RAM      0x7
-#define JDEC_EEPROM_LOAD_WAIT 0x4
-		u8 JDEC   :3;
-		u8 na     :5;
-	} JDEC_ca;
-
-	struct {
-		u8 REV   :4;
-		u8 LAYER :4;
-	} REVID_e0;
-
-	struct {
-		u8 unk0   :1;
-		u8 CNTCTL :1;
-		u8 BITCNT :1;
-		u8 unk1   :1;
-		u8 RESYNC :1;
-		u8 unk2   :3;
-	} BERCTL_fa;
-
-	struct {
-		u8 CSEL0  :1;
-		u8 CLKED0 :1;
-		u8 CSEL1  :1;
-		u8 CLKED1 :1;
-		u8 CLKLEV :1;
-		u8 SPIVAR :1;
-		u8 na     :2;
-	} TUNSET_fc;
-
-	struct {
-		u8 CLK    :1;
-		u8 DATA   :1;
-		u8 CS0    :1;
-		u8 CS1    :1;
-		u8 AGCSEL :1;
-		u8 na0    :1;
-		u8 TUNSEL :1;
-		u8 na1    :1;
-	} TUNCTL_fd;
-
-	u8 TUNSEL0_fe;
-	u8 TUNSEL1_ff;
-
-} bcm3510_register_value;
-
-/* HAB commands */
-
-/* version */
-#define CMD_GET_VERSION_INFO   0x3D
-#define MSGID_GET_VERSION_INFO 0x15
-struct bcm3510_hab_cmd_get_version_info {
-	u8 microcode_version;
-	u8 script_version;
-	u8 config_version;
-	u8 demod_version;
-} PACKED;
-
-#define BCM3510_DEF_MICROCODE_VERSION 0x0E
-#define BCM3510_DEF_SCRIPT_VERSION    0x06
-#define BCM3510_DEF_CONFIG_VERSION    0x01
-#define BCM3510_DEF_DEMOD_VERSION     0xB1
-
-/* acquire */
-#define CMD_ACQUIRE            0x38
-
-#define MSGID_EXT_TUNER_ACQUIRE 0x0A
-struct bcm3510_hab_cmd_ext_acquire {
-	struct {
-		u8 MODE      :4;
-		u8 BW        :1;
-		u8 FA        :1;
-		u8 NTSCSWEEP :1;
-		u8 OFFSET    :1;
-	} PACKED ACQUIRE0; /* control_byte */
-
-	struct {
-		u8 IF_FREQ  :3;
-		u8 zero0    :1;
-		u8 SYM_RATE :3;
-		u8 zero1    :1;
-	} PACKED ACQUIRE1; /* sym_if */
-
-	u8 IF_OFFSET0;   /* IF_Offset_10hz */
-	u8 IF_OFFSET1;
-	u8 SYM_OFFSET0;  /* SymbolRateOffset */
-	u8 SYM_OFFSET1;
-	u8 NTSC_OFFSET0; /* NTSC_Offset_10hz */
-	u8 NTSC_OFFSET1;
-} PACKED;
-
-#define MSGID_INT_TUNER_ACQUIRE 0x0B
-struct bcm3510_hab_cmd_int_acquire {
-	struct {
-		u8 MODE      :4;
-		u8 BW        :1;
-		u8 FA        :1;
-		u8 NTSCSWEEP :1;
-		u8 OFFSET    :1;
-	} PACKED ACQUIRE0; /* control_byte */
-
-	struct {
-		u8 IF_FREQ  :3;
-		u8 zero0    :1;
-		u8 SYM_RATE :3;
-		u8 zero1    :1;
-	} PACKED ACQUIRE1; /* sym_if */
-
-	u8 TUNER_FREQ0;
-	u8 TUNER_FREQ1;
-	u8 TUNER_FREQ2;
-	u8 TUNER_FREQ3;
-	u8 IF_OFFSET0;   /* IF_Offset_10hz */
-	u8 IF_OFFSET1;
-	u8 SYM_OFFSET0;  /* SymbolRateOffset */
-	u8 SYM_OFFSET1;
-	u8 NTSC_OFFSET0; /* NTSC_Offset_10hz */
-	u8 NTSC_OFFSET1;
-} PACKED;
-
-/* modes */
-#define BCM3510_QAM16           =   0x01
-#define BCM3510_QAM32           =   0x02
-#define BCM3510_QAM64           =   0x03
-#define BCM3510_QAM128          =   0x04
-#define BCM3510_QAM256          =   0x05
-#define BCM3510_8VSB            =   0x0B
-#define BCM3510_16VSB           =   0x0D
-
-/* IF_FREQS */
-#define BCM3510_IF_TERRESTRIAL 0x0
-#define BCM3510_IF_CABLE       0x1
-#define BCM3510_IF_USE_CMD     0x7
-
-/* SYM_RATE */
-#define BCM3510_SR_8VSB        0x0 /* 5381119 s/sec */
-#define BCM3510_SR_256QAM      0x1 /* 5360537 s/sec */
-#define BCM3510_SR_16QAM       0x2 /* 5056971 s/sec */
-#define BCM3510_SR_MISC        0x3 /* 5000000 s/sec */
-#define BCM3510_SR_USE_CMD     0x7
-
-/* special symbol rate */
-#define CMD_SET_VALUE_NOT_LISTED  0x2d
-#define MSGID_SET_SYMBOL_RATE_NOT_LISTED 0x0c
-struct bcm3510_hab_cmd_set_sr_not_listed {
-	u8 HOST_SYM_RATE0;
-	u8 HOST_SYM_RATE1;
-	u8 HOST_SYM_RATE2;
-	u8 HOST_SYM_RATE3;
-} PACKED;
-
-/* special IF */
-#define MSGID_SET_IF_FREQ_NOT_LISTED 0x0d
-struct bcm3510_hab_cmd_set_if_freq_not_listed {
-	u8 HOST_IF_FREQ0;
-	u8 HOST_IF_FREQ1;
-	u8 HOST_IF_FREQ2;
-	u8 HOST_IF_FREQ3;
-} PACKED;
-
-/* auto reacquire */
-#define CMD_AUTO_PARAM       0x2a
-#define MSGID_AUTO_REACQUIRE 0x0e
-struct bcm3510_hab_cmd_auto_reacquire {
-	u8 ACQ    :1; /* on/off*/
-	u8 unused :7;
-} PACKED;
-
-#define MSGID_SET_RF_AGC_SEL 0x12
-struct bcm3510_hab_cmd_set_agc {
-	u8 LVL    :1;
-	u8 unused :6;
-	u8 SEL    :1;
-} PACKED;
-
-#define MSGID_SET_AUTO_INVERSION 0x14
-struct bcm3510_hab_cmd_auto_inversion {
-	u8 AI     :1;
-	u8 unused :7;
-} PACKED;
-
-
-/* bert control */
-#define CMD_STATE_CONTROL  0x12
-#define MSGID_BERT_CONTROL 0x0e
-#define MSGID_BERT_SET     0xfa
-struct bcm3510_hab_cmd_bert_control {
-	u8 BE     :1;
-	u8 unused :7;
-} PACKED;
-
-#define MSGID_TRI_STATE 0x2e
-struct bcm3510_hab_cmd_tri_state {
-	u8 RE :1; /* a/d ram port pins */
-	u8 PE :1; /* baud clock pin */
-	u8 AC :1; /* a/d clock pin */
-	u8 BE :1; /* baud clock pin */
-	u8 unused :4;
-} PACKED;
-
-
-/* tune */
-#define CMD_TUNE   0x38
-#define MSGID_TUNE 0x16
-struct bcm3510_hab_cmd_tune_ctrl_data_pair {
-	struct {
-#define BITS_8 0x07
-#define BITS_7 0x06
-#define BITS_6 0x05
-#define BITS_5 0x04
-#define BITS_4 0x03
-#define BITS_3 0x02
-#define BITS_2 0x01
-#define BITS_1 0x00
-		u8 size    :3;
-		u8 unk     :2;
-		u8 clk_off :1;
-		u8 cs0     :1;
-		u8 cs1     :1;
-
-	} PACKED ctrl;
-
-	u8 data;
-} PACKED;
-
-struct bcm3510_hab_cmd_tune {
-	u8 length;
-	u8 clock_width;
-	u8 misc;
-	u8 TUNCTL_state;
-
-	struct bcm3510_hab_cmd_tune_ctrl_data_pair ctl_dat[16];
-} PACKED;
-
-#define CMD_STATUS    0x38
-#define MSGID_STATUS1 0x08
-struct bcm3510_hab_cmd_status1 {
-	struct {
-		u8 EQ_MODE       :4;
-		u8 reserved      :2;
-		u8 QRE           :1; /* if QSE and the spectrum is inversed */
-		u8 QSE           :1; /* automatic spectral inversion */
-	} PACKED STATUS0;
-
-	struct {
-		u8 RECEIVER_LOCK :1;
-		u8 FEC_LOCK      :1;
-		u8 OUT_PLL_LOCK  :1;
-		u8 reserved      :5;
-	} PACKED STATUS1;
-
-	struct {
-		u8 reserved      :2;
-		u8 BW            :1;
-		u8 NTE           :1; /* NTSC filter sweep enabled */
-		u8 AQI           :1; /* currently acquiring */
-		u8 FA            :1; /* fast acquisition */
-		u8 ARI           :1; /* auto reacquire */
-		u8 TI            :1; /* programming the tuner */
-	} PACKED STATUS2;
-	u8 STATUS3;
-	u8 SNR_EST0;
-	u8 SNR_EST1;
-	u8 TUNER_FREQ0;
-	u8 TUNER_FREQ1;
-	u8 TUNER_FREQ2;
-	u8 TUNER_FREQ3;
-	u8 SYM_RATE0;
-	u8 SYM_RATE1;
-	u8 SYM_RATE2;
-	u8 SYM_RATE3;
-	u8 SYM_OFFSET0;
-	u8 SYM_OFFSET1;
-	u8 SYM_ERROR0;
-	u8 SYM_ERROR1;
-	u8 IF_FREQ0;
-	u8 IF_FREQ1;
-	u8 IF_FREQ2;
-	u8 IF_FREQ3;
-	u8 IF_OFFSET0;
-	u8 IF_OFFSET1;
-	u8 IF_ERROR0;
-	u8 IF_ERROR1;
-	u8 NTSC_FILTER0;
-	u8 NTSC_FILTER1;
-	u8 NTSC_FILTER2;
-	u8 NTSC_FILTER3;
-	u8 NTSC_OFFSET0;
-	u8 NTSC_OFFSET1;
-	u8 NTSC_ERROR0;
-	u8 NTSC_ERROR1;
-	u8 INT_AGC_LEVEL0;
-	u8 INT_AGC_LEVEL1;
-	u8 EXT_AGC_LEVEL0;
-	u8 EXT_AGC_LEVEL1;
-} PACKED;
-
-#define MSGID_STATUS2 0x14
-struct bcm3510_hab_cmd_status2 {
-	struct {
-		u8 EQ_MODE  :4;
-		u8 reserved :2;
-		u8 QRE      :1;
-		u8 QSR      :1;
-	} PACKED STATUS0;
-	struct {
-		u8 RL       :1;
-		u8 FL       :1;
-		u8 OL       :1;
-		u8 reserved :5;
-	} PACKED STATUS1;
-	u8 SYMBOL_RATE0;
-	u8 SYMBOL_RATE1;
-	u8 SYMBOL_RATE2;
-	u8 SYMBOL_RATE3;
-	u8 LDCERC0;
-	u8 LDCERC1;
-	u8 LDCERC2;
-	u8 LDCERC3;
-	u8 LDUERC0;
-	u8 LDUERC1;
-	u8 LDUERC2;
-	u8 LDUERC3;
-	u8 LDBER0;
-	u8 LDBER1;
-	u8 LDBER2;
-	u8 LDBER3;
-	struct {
-		u8 MODE_TYPE :4; /* acquire mode 0 */
-		u8 reservd   :4;
-	} MODE_TYPE;
-	u8 SNR_EST0;
-	u8 SNR_EST1;
-	u8 SIGNAL;
-} PACKED;
-
-#define CMD_SET_RF_BW_NOT_LISTED   0x3f
-#define MSGID_SET_RF_BW_NOT_LISTED 0x11
-/* TODO */
-
-#endif
diff --git a/drivers/media/dvb/frontends/bsbe1-d01a.h b/drivers/media/dvb/frontends/bsbe1-d01a.h
deleted file mode 100644
index 7ed3c42..0000000
--- a/drivers/media/dvb/frontends/bsbe1-d01a.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * bsbe1-d01a.h - ALPS BSBE1-D01A tuner support
- *
- * Copyright (C) 2011 Oliver Endriss <o.endriss@gmx.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org
- */
-
-#ifndef BSBE1_D01A_H
-#define BSBE1_D01A_H
-
-#include "stb6000.h"
-#include "stv0288.h"
-
-static u8 stv0288_bsbe1_d01a_inittab[] = {
-	0x01, 0x15,
-	0x02, 0x20,
-	0x09, 0x0,
-	0x0a, 0x4,
-	0x0b, 0x0,
-	0x0c, 0x0,
-	0x0d, 0x0,
-	0x0e, 0xd4,
-	0x0f, 0x30,
-	0x11, 0x80,
-	0x12, 0x03,
-	0x13, 0x48,
-	0x14, 0x84,
-	0x15, 0x45,
-	0x16, 0xb7,
-	0x17, 0x9c,
-	0x18, 0x0,
-	0x19, 0xa6,
-	0x1a, 0x88,
-	0x1b, 0x8f,
-	0x1c, 0xf0,
-	0x20, 0x0b,
-	0x21, 0x54,
-	0x22, 0x0,
-	0x23, 0x0,
-	0x2b, 0xff,
-	0x2c, 0xf7,
-	0x30, 0x0,
-	0x31, 0x1e,
-	0x32, 0x14,
-	0x33, 0x0f,
-	0x34, 0x09,
-	0x35, 0x0c,
-	0x36, 0x05,
-	0x37, 0x2f,
-	0x38, 0x16,
-	0x39, 0xbd,
-	0x3a, 0x03,
-	0x3b, 0x13,
-	0x3c, 0x11,
-	0x3d, 0x30,
-	0x40, 0x63,
-	0x41, 0x04,
-	0x42, 0x60,
-	0x43, 0x00,
-	0x44, 0x00,
-	0x45, 0x00,
-	0x46, 0x00,
-	0x47, 0x00,
-	0x4a, 0x00,
-	0x50, 0x10,
-	0x51, 0x36,
-	0x52, 0x09,
-	0x53, 0x94,
-	0x54, 0x62,
-	0x55, 0x29,
-	0x56, 0x64,
-	0x57, 0x2b,
-	0x58, 0x54,
-	0x59, 0x86,
-	0x5a, 0x0,
-	0x5b, 0x9b,
-	0x5c, 0x08,
-	0x5d, 0x7f,
-	0x5e, 0x0,
-	0x5f, 0xff,
-	0x70, 0x0,
-	0x71, 0x0,
-	0x72, 0x0,
-	0x74, 0x0,
-	0x75, 0x0,
-	0x76, 0x0,
-	0x81, 0x0,
-	0x82, 0x3f,
-	0x83, 0x3f,
-	0x84, 0x0,
-	0x85, 0x0,
-	0x88, 0x0,
-	0x89, 0x0,
-	0x8a, 0x0,
-	0x8b, 0x0,
-	0x8c, 0x0,
-	0x90, 0x0,
-	0x91, 0x0,
-	0x92, 0x0,
-	0x93, 0x0,
-	0x94, 0x1c,
-	0x97, 0x0,
-	0xa0, 0x48,
-	0xa1, 0x0,
-	0xb0, 0xb8,
-	0xb1, 0x3a,
-	0xb2, 0x10,
-	0xb3, 0x82,
-	0xb4, 0x80,
-	0xb5, 0x82,
-	0xb6, 0x82,
-	0xb7, 0x82,
-	0xb8, 0x20,
-	0xb9, 0x0,
-	0xf0, 0x0,
-	0xf1, 0x0,
-	0xf2, 0xc0,
-	0xff, 0xff,
-};
-
-static struct stv0288_config stv0288_bsbe1_d01a_config = {
-	.demod_address = 0x68,
-	.min_delay_ms = 100,
-	.inittab = stv0288_bsbe1_d01a_inittab,
-};
-
-#endif
diff --git a/drivers/media/dvb/frontends/bsbe1.h b/drivers/media/dvb/frontends/bsbe1.h
deleted file mode 100644
index 53e4d0d..0000000
--- a/drivers/media/dvb/frontends/bsbe1.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * bsbe1.h - ALPS BSBE1 tuner support
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org
- */
-
-#ifndef BSBE1_H
-#define BSBE1_H
-
-static u8 alps_bsbe1_inittab[] = {
-	0x01, 0x15,   /* XTAL = 4MHz, VCO = 352 MHz */
-	0x02, 0x30,   /* MCLK = 88 MHz */
-	0x03, 0x00,   /* ACR output 0 */
-	0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
-	0x05, 0x05,   /* I2CT = 0, SCLT = 1, SDAT = 1 */
-	0x06, 0x00,   /* DAC output 0 */
-	0x08, 0x40,   /* DiSEqC off, LNB power on OP2/LOCK pin on */
-	0x09, 0x00,   /* FIFO */
-	0x0c, 0x51,   /* OP1/OP0 normal, val = 1 (LNB power on) */
-	0x0d, 0x82,   /* DC offset compensation = on, beta_agc1 = 2 */
-	0x0f, 0x92,   /* AGC1R */
-	0x10, 0x34,   /* AGC2O */
-	0x11, 0x84,   /* TLSR */
-	0x12, 0xb9,   /* CFD */
-	0x15, 0xc9,   /* lock detector threshold */
-	0x28, 0x00,   /* out imp: normal, type: parallel, FEC mode: QPSK */
-	0x33, 0xfc,   /* RS control */
-	0x34, 0x93,   /* count viterbi bit errors per 2E18 bytes */
-	0xff, 0xff
-};
-
-
-static int alps_bsbe1_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
-{
-	u8 aclk = 0;
-	u8 bclk = 0;
-
-	if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
-	else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
-	else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
-	else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
-	else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
-	else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
-
-	stv0299_writereg(fe, 0x13, aclk);
-	stv0299_writereg(fe, 0x14, bclk);
-	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
-	stv0299_writereg(fe, 0x20, (ratio >>  8) & 0xff);
-	stv0299_writereg(fe, 0x21, (ratio      ) & 0xf0);
-
-	return 0;
-}
-
-static int alps_bsbe1_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	int ret;
-	u8 data[4];
-	u32 div;
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
-	struct i2c_adapter *i2c = fe->tuner_priv;
-
-	if ((p->frequency < 950000) || (p->frequency > 2150000))
-		return -EINVAL;
-
-	div = p->frequency / 1000;
-	data[0] = (div >> 8) & 0x7f;
-	data[1] = div & 0xff;
-	data[2] = 0x80 | ((div & 0x18000) >> 10) | 0x1;
-	data[3] = 0xe0;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	ret = i2c_transfer(i2c, &msg, 1);
-	return (ret != 1) ? -EIO : 0;
-}
-
-static struct stv0299_config alps_bsbe1_config = {
-	.demod_address = 0x68,
-	.inittab = alps_bsbe1_inittab,
-	.mclk = 88000000UL,
-	.invert = 1,
-	.skip_reinit = 0,
-	.min_delay_ms = 100,
-	.set_symbol_rate = alps_bsbe1_set_symbol_rate,
-};
-
-#endif
diff --git a/drivers/media/dvb/frontends/bsru6.h b/drivers/media/dvb/frontends/bsru6.h
deleted file mode 100644
index c2a578e..0000000
--- a/drivers/media/dvb/frontends/bsru6.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * bsru6.h - ALPS BSRU6 tuner support (moved from budget-ci.c)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org
- */
-
-#ifndef BSRU6_H
-#define BSRU6_H
-
-static u8 alps_bsru6_inittab[] = {
-	0x01, 0x15,
-	0x02, 0x30,
-	0x03, 0x00,
-	0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
-	0x05, 0x35,   /* I2CT = 0, SCLT = 1, SDAT = 1 */
-	0x06, 0x40,   /* DAC not used, set to high impendance mode */
-	0x07, 0x00,   /* DAC LSB */
-	0x08, 0x40,   /* DiSEqC off, LNB power on OP2/LOCK pin on */
-	0x09, 0x00,   /* FIFO */
-	0x0c, 0x51,   /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
-	0x0d, 0x82,   /* DC offset compensation = ON, beta_agc1 = 2 */
-	0x0e, 0x23,   /* alpha_tmg = 2, beta_tmg = 3 */
-	0x10, 0x3f,   // AGC2  0x3d
-	0x11, 0x84,
-	0x12, 0xb9,
-	0x15, 0xc9,   // lock detector threshold
-	0x16, 0x00,
-	0x17, 0x00,
-	0x18, 0x00,
-	0x19, 0x00,
-	0x1a, 0x00,
-	0x1f, 0x50,
-	0x20, 0x00,
-	0x21, 0x00,
-	0x22, 0x00,
-	0x23, 0x00,
-	0x28, 0x00,  // out imp: normal  out type: parallel FEC mode:0
-	0x29, 0x1e,  // 1/2 threshold
-	0x2a, 0x14,  // 2/3 threshold
-	0x2b, 0x0f,  // 3/4 threshold
-	0x2c, 0x09,  // 5/6 threshold
-	0x2d, 0x05,  // 7/8 threshold
-	0x2e, 0x01,
-	0x31, 0x1f,  // test all FECs
-	0x32, 0x19,  // viterbi and synchro search
-	0x33, 0xfc,  // rs control
-	0x34, 0x93,  // error control
-	0x0f, 0x52,
-	0xff, 0xff
-};
-
-static int alps_bsru6_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
-{
-	u8 aclk = 0;
-	u8 bclk = 0;
-
-	if (srate < 1500000) {
-		aclk = 0xb7;
-		bclk = 0x47;
-	} else if (srate < 3000000) {
-		aclk = 0xb7;
-		bclk = 0x4b;
-	} else if (srate < 7000000) {
-		aclk = 0xb7;
-		bclk = 0x4f;
-	} else if (srate < 14000000) {
-		aclk = 0xb7;
-		bclk = 0x53;
-	} else if (srate < 30000000) {
-		aclk = 0xb6;
-		bclk = 0x53;
-	} else if (srate < 45000000) {
-		aclk = 0xb4;
-		bclk = 0x51;
-	}
-
-	stv0299_writereg(fe, 0x13, aclk);
-	stv0299_writereg(fe, 0x14, bclk);
-	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
-	stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
-	stv0299_writereg(fe, 0x21, ratio & 0xf0);
-
-	return 0;
-}
-
-static int alps_bsru6_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	u8 buf[4];
-	u32 div;
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
-	struct i2c_adapter *i2c = fe->tuner_priv;
-
-	if ((p->frequency < 950000) || (p->frequency > 2150000))
-		return -EINVAL;
-
-	div = (p->frequency + (125 - 1)) / 125;	/* round correctly */
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = div & 0xff;
-	buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
-	buf[3] = 0xC4;
-
-	if (p->frequency > 1530000)
-		buf[3] = 0xc0;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(i2c, &msg, 1) != 1)
-		return -EIO;
-	return 0;
-}
-
-static struct stv0299_config alps_bsru6_config = {
-	.demod_address = 0x68,
-	.inittab = alps_bsru6_inittab,
-	.mclk = 88000000UL,
-	.invert = 1,
-	.skip_reinit = 0,
-	.lock_output = STV0299_LOCKOUTPUT_1,
-	.volt13_op0_op1 = STV0299_VOLT13_OP1,
-	.min_delay_ms = 100,
-	.set_symbol_rate = alps_bsru6_set_symbol_rate,
-};
-
-#endif
diff --git a/drivers/media/dvb/frontends/cx22700.c b/drivers/media/dvb/frontends/cx22700.c
deleted file mode 100644
index f2a90f9..0000000
--- a/drivers/media/dvb/frontends/cx22700.c
+++ /dev/null
@@ -1,443 +0,0 @@
-/*
-    Conexant cx22700 DVB OFDM demodulator driver
-
-    Copyright (C) 2001-2002 Convergence Integrated Media GmbH
-	Holger Waechtler <holger@convergence.de>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include "dvb_frontend.h"
-#include "cx22700.h"
-
-
-struct cx22700_state {
-
-	struct i2c_adapter* i2c;
-
-	const struct cx22700_config* config;
-
-	struct dvb_frontend frontend;
-};
-
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "cx22700: " args); \
-	} while (0)
-
-static u8 init_tab [] = {
-	0x04, 0x10,
-	0x05, 0x09,
-	0x06, 0x00,
-	0x08, 0x04,
-	0x09, 0x00,
-	0x0a, 0x01,
-	0x15, 0x40,
-	0x16, 0x10,
-	0x17, 0x87,
-	0x18, 0x17,
-	0x1a, 0x10,
-	0x25, 0x04,
-	0x2e, 0x00,
-	0x39, 0x00,
-	0x3a, 0x04,
-	0x45, 0x08,
-	0x46, 0x02,
-	0x47, 0x05,
-};
-
-
-static int cx22700_writereg (struct cx22700_state* state, u8 reg, u8 data)
-{
-	int ret;
-	u8 buf [] = { reg, data };
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
-
-	dprintk ("%s\n", __func__);
-
-	ret = i2c_transfer (state->i2c, &msg, 1);
-
-	if (ret != 1)
-		printk("%s: writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n",
-			__func__, reg, data, ret);
-
-	return (ret != 1) ? -1 : 0;
-}
-
-static int cx22700_readreg (struct cx22700_state* state, u8 reg)
-{
-	int ret;
-	u8 b0 [] = { reg };
-	u8 b1 [] = { 0 };
-	struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
-			   { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
-
-	dprintk ("%s\n", __func__);
-
-	ret = i2c_transfer (state->i2c, msg, 2);
-
-	if (ret != 2) return -EIO;
-
-	return b1[0];
-}
-
-static int cx22700_set_inversion (struct cx22700_state* state, int inversion)
-{
-	u8 val;
-
-	dprintk ("%s\n", __func__);
-
-	switch (inversion) {
-	case INVERSION_AUTO:
-		return -EOPNOTSUPP;
-	case INVERSION_ON:
-		val = cx22700_readreg (state, 0x09);
-		return cx22700_writereg (state, 0x09, val | 0x01);
-	case INVERSION_OFF:
-		val = cx22700_readreg (state, 0x09);
-		return cx22700_writereg (state, 0x09, val & 0xfe);
-	default:
-		return -EINVAL;
-	}
-}
-
-static int cx22700_set_tps(struct cx22700_state *state,
-			   struct dtv_frontend_properties *p)
-{
-	static const u8 qam_tab [4] = { 0, 1, 0, 2 };
-	static const u8 fec_tab [6] = { 0, 1, 2, 0, 3, 4 };
-	u8 val;
-
-	dprintk ("%s\n", __func__);
-
-	if (p->code_rate_HP < FEC_1_2 || p->code_rate_HP > FEC_7_8)
-		return -EINVAL;
-
-	if (p->code_rate_LP < FEC_1_2 || p->code_rate_LP > FEC_7_8)
-		return -EINVAL;
-
-	if (p->code_rate_HP == FEC_4_5 || p->code_rate_LP == FEC_4_5)
-		return -EINVAL;
-
-	if (p->guard_interval < GUARD_INTERVAL_1_32 ||
-	    p->guard_interval > GUARD_INTERVAL_1_4)
-		return -EINVAL;
-
-	if (p->transmission_mode != TRANSMISSION_MODE_2K &&
-	    p->transmission_mode != TRANSMISSION_MODE_8K)
-		return -EINVAL;
-
-	if (p->modulation != QPSK &&
-	    p->modulation != QAM_16 &&
-	    p->modulation != QAM_64)
-		return -EINVAL;
-
-	if (p->hierarchy < HIERARCHY_NONE ||
-	    p->hierarchy > HIERARCHY_4)
-		return -EINVAL;
-
-	if (p->bandwidth_hz > 8000000 || p->bandwidth_hz < 6000000)
-		return -EINVAL;
-
-	if (p->bandwidth_hz == 7000000)
-		cx22700_writereg (state, 0x09, cx22700_readreg (state, 0x09 | 0x10));
-	else
-		cx22700_writereg (state, 0x09, cx22700_readreg (state, 0x09 & ~0x10));
-
-	val = qam_tab[p->modulation - QPSK];
-	val |= p->hierarchy - HIERARCHY_NONE;
-
-	cx22700_writereg (state, 0x04, val);
-
-	val = fec_tab[p->code_rate_HP - FEC_1_2] << 3;
-	val |= fec_tab[p->code_rate_LP - FEC_1_2];
-
-	cx22700_writereg (state, 0x05, val);
-
-	val = (p->guard_interval - GUARD_INTERVAL_1_32) << 2;
-	val |= p->transmission_mode - TRANSMISSION_MODE_2K;
-
-	cx22700_writereg (state, 0x06, val);
-
-	cx22700_writereg (state, 0x08, 0x04 | 0x02);  /* use user tps parameters */
-	cx22700_writereg (state, 0x08, 0x04);         /* restart acquisition */
-
-	return 0;
-}
-
-static int cx22700_get_tps(struct cx22700_state *state,
-			   struct dtv_frontend_properties *p)
-{
-	static const fe_modulation_t qam_tab [3] = { QPSK, QAM_16, QAM_64 };
-	static const fe_code_rate_t fec_tab [5] = { FEC_1_2, FEC_2_3, FEC_3_4,
-						    FEC_5_6, FEC_7_8 };
-	u8 val;
-
-	dprintk ("%s\n", __func__);
-
-	if (!(cx22700_readreg(state, 0x07) & 0x20))  /*  tps valid? */
-		return -EAGAIN;
-
-	val = cx22700_readreg (state, 0x01);
-
-	if ((val & 0x7) > 4)
-		p->hierarchy = HIERARCHY_AUTO;
-	else
-		p->hierarchy = HIERARCHY_NONE + (val & 0x7);
-
-	if (((val >> 3) & 0x3) > 2)
-		p->modulation = QAM_AUTO;
-	else
-		p->modulation = qam_tab[(val >> 3) & 0x3];
-
-	val = cx22700_readreg (state, 0x02);
-
-	if (((val >> 3) & 0x07) > 4)
-		p->code_rate_HP = FEC_AUTO;
-	else
-		p->code_rate_HP = fec_tab[(val >> 3) & 0x07];
-
-	if ((val & 0x07) > 4)
-		p->code_rate_LP = FEC_AUTO;
-	else
-		p->code_rate_LP = fec_tab[val & 0x07];
-
-	val = cx22700_readreg (state, 0x03);
-
-	p->guard_interval = GUARD_INTERVAL_1_32 + ((val >> 6) & 0x3);
-	p->transmission_mode = TRANSMISSION_MODE_2K + ((val >> 5) & 0x1);
-
-	return 0;
-}
-
-static int cx22700_init (struct dvb_frontend* fe)
-
-{	struct cx22700_state* state = fe->demodulator_priv;
-	int i;
-
-	dprintk("cx22700_init: init chip\n");
-
-	cx22700_writereg (state, 0x00, 0x02);   /*  soft reset */
-	cx22700_writereg (state, 0x00, 0x00);
-
-	msleep(10);
-
-	for (i=0; i<sizeof(init_tab); i+=2)
-		cx22700_writereg (state, init_tab[i], init_tab[i+1]);
-
-	cx22700_writereg (state, 0x00, 0x01);
-
-	return 0;
-}
-
-static int cx22700_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct cx22700_state* state = fe->demodulator_priv;
-
-	u16 rs_ber = (cx22700_readreg (state, 0x0d) << 9)
-		   | (cx22700_readreg (state, 0x0e) << 1);
-	u8 sync = cx22700_readreg (state, 0x07);
-
-	*status = 0;
-
-	if (rs_ber < 0xff00)
-		*status |= FE_HAS_SIGNAL;
-
-	if (sync & 0x20)
-		*status |= FE_HAS_CARRIER;
-
-	if (sync & 0x10)
-		*status |= FE_HAS_VITERBI;
-
-	if (sync & 0x10)
-		*status |= FE_HAS_SYNC;
-
-	if (*status == 0x0f)
-		*status |= FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int cx22700_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct cx22700_state* state = fe->demodulator_priv;
-
-	*ber = cx22700_readreg (state, 0x0c) & 0x7f;
-	cx22700_writereg (state, 0x0c, 0x00);
-
-	return 0;
-}
-
-static int cx22700_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength)
-{
-	struct cx22700_state* state = fe->demodulator_priv;
-
-	u16 rs_ber = (cx22700_readreg (state, 0x0d) << 9)
-		   | (cx22700_readreg (state, 0x0e) << 1);
-	*signal_strength = ~rs_ber;
-
-	return 0;
-}
-
-static int cx22700_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct cx22700_state* state = fe->demodulator_priv;
-
-	u16 rs_ber = (cx22700_readreg (state, 0x0d) << 9)
-		   | (cx22700_readreg (state, 0x0e) << 1);
-	*snr = ~rs_ber;
-
-	return 0;
-}
-
-static int cx22700_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct cx22700_state* state = fe->demodulator_priv;
-
-	*ucblocks = cx22700_readreg (state, 0x0f);
-	cx22700_writereg (state, 0x0f, 0x00);
-
-	return 0;
-}
-
-static int cx22700_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct cx22700_state* state = fe->demodulator_priv;
-
-	cx22700_writereg (state, 0x00, 0x02); /* XXX CHECKME: soft reset*/
-	cx22700_writereg (state, 0x00, 0x00);
-
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	cx22700_set_inversion(state, c->inversion);
-	cx22700_set_tps(state, c);
-	cx22700_writereg (state, 0x37, 0x01);  /* PAL loop filter off */
-	cx22700_writereg (state, 0x00, 0x01);  /* restart acquire */
-
-	return 0;
-}
-
-static int cx22700_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct cx22700_state* state = fe->demodulator_priv;
-	u8 reg09 = cx22700_readreg (state, 0x09);
-
-	c->inversion = reg09 & 0x1 ? INVERSION_ON : INVERSION_OFF;
-	return cx22700_get_tps(state, c);
-}
-
-static int cx22700_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
-{
-	struct cx22700_state* state = fe->demodulator_priv;
-
-	if (enable) {
-		return cx22700_writereg(state, 0x0a, 0x00);
-	} else {
-		return cx22700_writereg(state, 0x0a, 0x01);
-	}
-}
-
-static int cx22700_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
-{
-	fesettings->min_delay_ms = 150;
-	fesettings->step_size = 166667;
-	fesettings->max_drift = 166667*2;
-	return 0;
-}
-
-static void cx22700_release(struct dvb_frontend* fe)
-{
-	struct cx22700_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops cx22700_ops;
-
-struct dvb_frontend* cx22700_attach(const struct cx22700_config* config,
-				    struct i2c_adapter* i2c)
-{
-	struct cx22700_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct cx22700_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-
-	/* check if the demod is there */
-	if (cx22700_readreg(state, 0x07) < 0) goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &cx22700_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops cx22700_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name			= "Conexant CX22700 DVB-T",
-		.frequency_min		= 470000000,
-		.frequency_max		= 860000000,
-		.frequency_stepsize	= 166667,
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-		      FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-		      FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
-		      FE_CAN_RECOVER
-	},
-
-	.release = cx22700_release,
-
-	.init = cx22700_init,
-	.i2c_gate_ctrl = cx22700_i2c_gate_ctrl,
-
-	.set_frontend = cx22700_set_frontend,
-	.get_frontend = cx22700_get_frontend,
-	.get_tune_settings = cx22700_get_tune_settings,
-
-	.read_status = cx22700_read_status,
-	.read_ber = cx22700_read_ber,
-	.read_signal_strength = cx22700_read_signal_strength,
-	.read_snr = cx22700_read_snr,
-	.read_ucblocks = cx22700_read_ucblocks,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("Conexant CX22700 DVB-T Demodulator driver");
-MODULE_AUTHOR("Holger Waechtler");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(cx22700_attach);
diff --git a/drivers/media/dvb/frontends/cx22700.h b/drivers/media/dvb/frontends/cx22700.h
deleted file mode 100644
index 4757a93..0000000
--- a/drivers/media/dvb/frontends/cx22700.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
-    Conexant CX22700 DVB OFDM demodulator driver
-
-    Copyright (C) 2001-2002 Convergence Integrated Media GmbH
-	Holger Waechtler <holger@convergence.de>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef CX22700_H
-#define CX22700_H
-
-#include <linux/dvb/frontend.h>
-
-struct cx22700_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-};
-
-#if defined(CONFIG_DVB_CX22700) || (defined(CONFIG_DVB_CX22700_MODULE) && defined(MODULE))
-extern struct dvb_frontend* cx22700_attach(const struct cx22700_config* config,
-					   struct i2c_adapter* i2c);
-#else
-static inline struct dvb_frontend* cx22700_attach(const struct cx22700_config* config,
-					   struct i2c_adapter* i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_CX22700
-
-#endif // CX22700_H
diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c
deleted file mode 100644
index edc8eaf..0000000
--- a/drivers/media/dvb/frontends/cx22702.c
+++ /dev/null
@@ -1,653 +0,0 @@
-/*
-    Conexant 22702 DVB OFDM demodulator driver
-
-    based on:
-	Alps TDMB7 DVB OFDM demodulator driver
-
-    Copyright (C) 2001-2002 Convergence Integrated Media GmbH
-	  Holger Waechtler <holger@convergence.de>
-
-    Copyright (C) 2004 Steven Toth <stoth@linuxtv.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include "dvb_frontend.h"
-#include "cx22702.h"
-
-struct cx22702_state {
-
-	struct i2c_adapter *i2c;
-
-	/* configuration settings */
-	const struct cx22702_config *config;
-
-	struct dvb_frontend frontend;
-
-	/* previous uncorrected block counter */
-	u8 prevUCBlocks;
-};
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Enable verbose debug messages");
-
-#define dprintk	if (debug) printk
-
-/* Register values to initialise the demod */
-static const u8 init_tab[] = {
-	0x00, 0x00, /* Stop acquisition */
-	0x0B, 0x06,
-	0x09, 0x01,
-	0x0D, 0x41,
-	0x16, 0x32,
-	0x20, 0x0A,
-	0x21, 0x17,
-	0x24, 0x3e,
-	0x26, 0xff,
-	0x27, 0x10,
-	0x28, 0x00,
-	0x29, 0x00,
-	0x2a, 0x10,
-	0x2b, 0x00,
-	0x2c, 0x10,
-	0x2d, 0x00,
-	0x48, 0xd4,
-	0x49, 0x56,
-	0x6b, 0x1e,
-	0xc8, 0x02,
-	0xf9, 0x00,
-	0xfa, 0x00,
-	0xfb, 0x00,
-	0xfc, 0x00,
-	0xfd, 0x00,
-};
-
-static int cx22702_writereg(struct cx22702_state *state, u8 reg, u8 data)
-{
-	int ret;
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg = {
-		.addr = state->config->demod_address, .flags = 0,
-			.buf = buf, .len = 2 };
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-
-	if (unlikely(ret != 1)) {
-		printk(KERN_ERR
-			"%s: error (reg == 0x%02x, val == 0x%02x, ret == %i)\n",
-			__func__, reg, data, ret);
-		return -1;
-	}
-
-	return 0;
-}
-
-static u8 cx22702_readreg(struct cx22702_state *state, u8 reg)
-{
-	int ret;
-	u8 data;
-
-	struct i2c_msg msg[] = {
-		{ .addr = state->config->demod_address, .flags = 0,
-			.buf = &reg, .len = 1 },
-		{ .addr = state->config->demod_address, .flags = I2C_M_RD,
-			.buf = &data, .len = 1 } };
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (unlikely(ret != 2)) {
-		printk(KERN_ERR "%s: error (reg == 0x%02x, ret == %i)\n",
-			__func__, reg, ret);
-		return 0;
-	}
-
-	return data;
-}
-
-static int cx22702_set_inversion(struct cx22702_state *state, int inversion)
-{
-	u8 val;
-
-	val = cx22702_readreg(state, 0x0C);
-	switch (inversion) {
-	case INVERSION_AUTO:
-		return -EOPNOTSUPP;
-	case INVERSION_ON:
-		val |= 0x01;
-		break;
-	case INVERSION_OFF:
-		val &= 0xfe;
-		break;
-	default:
-		return -EINVAL;
-	}
-	return cx22702_writereg(state, 0x0C, val);
-}
-
-/* Retrieve the demod settings */
-static int cx22702_get_tps(struct cx22702_state *state,
-			   struct dtv_frontend_properties *p)
-{
-	u8 val;
-
-	/* Make sure the TPS regs are valid */
-	if (!(cx22702_readreg(state, 0x0A) & 0x20))
-		return -EAGAIN;
-
-	val = cx22702_readreg(state, 0x01);
-	switch ((val & 0x18) >> 3) {
-	case 0:
-		p->modulation = QPSK;
-		break;
-	case 1:
-		p->modulation = QAM_16;
-		break;
-	case 2:
-		p->modulation = QAM_64;
-		break;
-	}
-	switch (val & 0x07) {
-	case 0:
-		p->hierarchy = HIERARCHY_NONE;
-		break;
-	case 1:
-		p->hierarchy = HIERARCHY_1;
-		break;
-	case 2:
-		p->hierarchy = HIERARCHY_2;
-		break;
-	case 3:
-		p->hierarchy = HIERARCHY_4;
-		break;
-	}
-
-
-	val = cx22702_readreg(state, 0x02);
-	switch ((val & 0x38) >> 3) {
-	case 0:
-		p->code_rate_HP = FEC_1_2;
-		break;
-	case 1:
-		p->code_rate_HP = FEC_2_3;
-		break;
-	case 2:
-		p->code_rate_HP = FEC_3_4;
-		break;
-	case 3:
-		p->code_rate_HP = FEC_5_6;
-		break;
-	case 4:
-		p->code_rate_HP = FEC_7_8;
-		break;
-	}
-	switch (val & 0x07) {
-	case 0:
-		p->code_rate_LP = FEC_1_2;
-		break;
-	case 1:
-		p->code_rate_LP = FEC_2_3;
-		break;
-	case 2:
-		p->code_rate_LP = FEC_3_4;
-		break;
-	case 3:
-		p->code_rate_LP = FEC_5_6;
-		break;
-	case 4:
-		p->code_rate_LP = FEC_7_8;
-		break;
-	}
-
-	val = cx22702_readreg(state, 0x03);
-	switch ((val & 0x0c) >> 2) {
-	case 0:
-		p->guard_interval = GUARD_INTERVAL_1_32;
-		break;
-	case 1:
-		p->guard_interval = GUARD_INTERVAL_1_16;
-		break;
-	case 2:
-		p->guard_interval = GUARD_INTERVAL_1_8;
-		break;
-	case 3:
-		p->guard_interval = GUARD_INTERVAL_1_4;
-		break;
-	}
-	switch (val & 0x03) {
-	case 0:
-		p->transmission_mode = TRANSMISSION_MODE_2K;
-		break;
-	case 1:
-		p->transmission_mode = TRANSMISSION_MODE_8K;
-		break;
-	}
-
-	return 0;
-}
-
-static int cx22702_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct cx22702_state *state = fe->demodulator_priv;
-	u8 val;
-
-	dprintk("%s(%d)\n", __func__, enable);
-	val = cx22702_readreg(state, 0x0D);
-	if (enable)
-		val &= 0xfe;
-	else
-		val |= 0x01;
-	return cx22702_writereg(state, 0x0D, val);
-}
-
-/* Talk to the demod, set the FEC, GUARD, QAM settings etc */
-static int cx22702_set_tps(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	u8 val;
-	struct cx22702_state *state = fe->demodulator_priv;
-
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	/* set inversion */
-	cx22702_set_inversion(state, p->inversion);
-
-	/* set bandwidth */
-	val = cx22702_readreg(state, 0x0C) & 0xcf;
-	switch (p->bandwidth_hz) {
-	case 6000000:
-		val |= 0x20;
-		break;
-	case 7000000:
-		val |= 0x10;
-		break;
-	case 8000000:
-		break;
-	default:
-		dprintk("%s: invalid bandwidth\n", __func__);
-		return -EINVAL;
-	}
-	cx22702_writereg(state, 0x0C, val);
-
-	p->code_rate_LP = FEC_AUTO; /* temp hack as manual not working */
-
-	/* use auto configuration? */
-	if ((p->hierarchy == HIERARCHY_AUTO) ||
-	   (p->modulation == QAM_AUTO) ||
-	   (p->code_rate_HP == FEC_AUTO) ||
-	   (p->code_rate_LP == FEC_AUTO) ||
-	   (p->guard_interval == GUARD_INTERVAL_AUTO) ||
-	   (p->transmission_mode == TRANSMISSION_MODE_AUTO)) {
-
-		/* TPS Source - use hardware driven values */
-		cx22702_writereg(state, 0x06, 0x10);
-		cx22702_writereg(state, 0x07, 0x9);
-		cx22702_writereg(state, 0x08, 0xC1);
-		cx22702_writereg(state, 0x0B, cx22702_readreg(state, 0x0B)
-			& 0xfc);
-		cx22702_writereg(state, 0x0C,
-			(cx22702_readreg(state, 0x0C) & 0xBF) | 0x40);
-		cx22702_writereg(state, 0x00, 0x01); /* Begin acquisition */
-		dprintk("%s: Autodetecting\n", __func__);
-		return 0;
-	}
-
-	/* manually programmed values */
-	switch (p->modulation) {		/* mask 0x18 */
-	case QPSK:
-		val = 0x00;
-		break;
-	case QAM_16:
-		val = 0x08;
-		break;
-	case QAM_64:
-		val = 0x10;
-		break;
-	default:
-		dprintk("%s: invalid modulation\n", __func__);
-		return -EINVAL;
-	}
-	switch (p->hierarchy) {	/* mask 0x07 */
-	case HIERARCHY_NONE:
-		break;
-	case HIERARCHY_1:
-		val |= 0x01;
-		break;
-	case HIERARCHY_2:
-		val |= 0x02;
-		break;
-	case HIERARCHY_4:
-		val |= 0x03;
-		break;
-	default:
-		dprintk("%s: invalid hierarchy\n", __func__);
-		return -EINVAL;
-	}
-	cx22702_writereg(state, 0x06, val);
-
-	switch (p->code_rate_HP) {		/* mask 0x38 */
-	case FEC_NONE:
-	case FEC_1_2:
-		val = 0x00;
-		break;
-	case FEC_2_3:
-		val = 0x08;
-		break;
-	case FEC_3_4:
-		val = 0x10;
-		break;
-	case FEC_5_6:
-		val = 0x18;
-		break;
-	case FEC_7_8:
-		val = 0x20;
-		break;
-	default:
-		dprintk("%s: invalid code_rate_HP\n", __func__);
-		return -EINVAL;
-	}
-	switch (p->code_rate_LP) {		/* mask 0x07 */
-	case FEC_NONE:
-	case FEC_1_2:
-		break;
-	case FEC_2_3:
-		val |= 0x01;
-		break;
-	case FEC_3_4:
-		val |= 0x02;
-		break;
-	case FEC_5_6:
-		val |= 0x03;
-		break;
-	case FEC_7_8:
-		val |= 0x04;
-		break;
-	default:
-		dprintk("%s: invalid code_rate_LP\n", __func__);
-		return -EINVAL;
-	}
-	cx22702_writereg(state, 0x07, val);
-
-	switch (p->guard_interval) {		/* mask 0x0c */
-	case GUARD_INTERVAL_1_32:
-		val = 0x00;
-		break;
-	case GUARD_INTERVAL_1_16:
-		val = 0x04;
-		break;
-	case GUARD_INTERVAL_1_8:
-		val = 0x08;
-		break;
-	case GUARD_INTERVAL_1_4:
-		val = 0x0c;
-		break;
-	default:
-		dprintk("%s: invalid guard_interval\n", __func__);
-		return -EINVAL;
-	}
-	switch (p->transmission_mode) {		/* mask 0x03 */
-	case TRANSMISSION_MODE_2K:
-		break;
-	case TRANSMISSION_MODE_8K:
-		val |= 0x1;
-		break;
-	default:
-		dprintk("%s: invalid transmission_mode\n", __func__);
-		return -EINVAL;
-	}
-	cx22702_writereg(state, 0x08, val);
-	cx22702_writereg(state, 0x0B,
-		(cx22702_readreg(state, 0x0B) & 0xfc) | 0x02);
-	cx22702_writereg(state, 0x0C,
-		(cx22702_readreg(state, 0x0C) & 0xBF) | 0x40);
-
-	/* Begin channel acquisition */
-	cx22702_writereg(state, 0x00, 0x01);
-
-	return 0;
-}
-
-/* Reset the demod hardware and reset all of the configuration registers
-   to a default state. */
-static int cx22702_init(struct dvb_frontend *fe)
-{
-	int i;
-	struct cx22702_state *state = fe->demodulator_priv;
-
-	cx22702_writereg(state, 0x00, 0x02);
-
-	msleep(10);
-
-	for (i = 0; i < ARRAY_SIZE(init_tab); i += 2)
-		cx22702_writereg(state, init_tab[i], init_tab[i + 1]);
-
-	cx22702_writereg(state, 0xf8, (state->config->output_mode << 1)
-		& 0x02);
-
-	cx22702_i2c_gate_ctrl(fe, 0);
-
-	return 0;
-}
-
-static int cx22702_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct cx22702_state *state = fe->demodulator_priv;
-	u8 reg0A;
-	u8 reg23;
-
-	*status = 0;
-
-	reg0A = cx22702_readreg(state, 0x0A);
-	reg23 = cx22702_readreg(state, 0x23);
-
-	dprintk("%s: status demod=0x%02x agc=0x%02x\n"
-		, __func__, reg0A, reg23);
-
-	if (reg0A & 0x10) {
-		*status |= FE_HAS_LOCK;
-		*status |= FE_HAS_VITERBI;
-		*status |= FE_HAS_SYNC;
-	}
-
-	if (reg0A & 0x20)
-		*status |= FE_HAS_CARRIER;
-
-	if (reg23 < 0xf0)
-		*status |= FE_HAS_SIGNAL;
-
-	return 0;
-}
-
-static int cx22702_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct cx22702_state *state = fe->demodulator_priv;
-
-	if (cx22702_readreg(state, 0xE4) & 0x02) {
-		/* Realtime statistics */
-		*ber = (cx22702_readreg(state, 0xDE) & 0x7F) << 7
-			| (cx22702_readreg(state, 0xDF) & 0x7F);
-	} else {
-		/* Averagtine statistics */
-		*ber = (cx22702_readreg(state, 0xDE) & 0x7F) << 7
-			| cx22702_readreg(state, 0xDF);
-	}
-
-	return 0;
-}
-
-static int cx22702_read_signal_strength(struct dvb_frontend *fe,
-	u16 *signal_strength)
-{
-	struct cx22702_state *state = fe->demodulator_priv;
-	u8 reg23;
-
-	/*
-	 * Experience suggests that the strength signal register works as
-	 * follows:
-	 * - In the absence of signal, value is 0xff.
-	 * - In the presence of a weak signal, bit 7 is set, not sure what
-	 *   the lower 7 bits mean.
-	 * - In the presence of a strong signal, the register holds a 7-bit
-	 *   value (bit 7 is cleared), with greater values standing for
-	 *   weaker signals.
-	 */
-	reg23 = cx22702_readreg(state, 0x23);
-	if (reg23 & 0x80) {
-		*signal_strength = 0;
-	} else {
-		reg23 = ~reg23 & 0x7f;
-		/* Scale to 16 bit */
-		*signal_strength = (reg23 << 9) | (reg23 << 2) | (reg23 >> 5);
-	}
-
-	return 0;
-}
-
-static int cx22702_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct cx22702_state *state = fe->demodulator_priv;
-
-	u16 rs_ber;
-	if (cx22702_readreg(state, 0xE4) & 0x02) {
-		/* Realtime statistics */
-		rs_ber = (cx22702_readreg(state, 0xDE) & 0x7F) << 7
-			| (cx22702_readreg(state, 0xDF) & 0x7F);
-	} else {
-		/* Averagine statistics */
-		rs_ber = (cx22702_readreg(state, 0xDE) & 0x7F) << 8
-			| cx22702_readreg(state, 0xDF);
-	}
-	*snr = ~rs_ber;
-
-	return 0;
-}
-
-static int cx22702_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	struct cx22702_state *state = fe->demodulator_priv;
-
-	u8 _ucblocks;
-
-	/* RS Uncorrectable Packet Count then reset */
-	_ucblocks = cx22702_readreg(state, 0xE3);
-	if (state->prevUCBlocks < _ucblocks)
-		*ucblocks = (_ucblocks - state->prevUCBlocks);
-	else
-		*ucblocks = state->prevUCBlocks - _ucblocks;
-	state->prevUCBlocks = _ucblocks;
-
-	return 0;
-}
-
-static int cx22702_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct cx22702_state *state = fe->demodulator_priv;
-
-	u8 reg0C = cx22702_readreg(state, 0x0C);
-
-	c->inversion = reg0C & 0x1 ? INVERSION_ON : INVERSION_OFF;
-	return cx22702_get_tps(state, c);
-}
-
-static int cx22702_get_tune_settings(struct dvb_frontend *fe,
-	struct dvb_frontend_tune_settings *tune)
-{
-	tune->min_delay_ms = 1000;
-	return 0;
-}
-
-static void cx22702_release(struct dvb_frontend *fe)
-{
-	struct cx22702_state *state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static const struct dvb_frontend_ops cx22702_ops;
-
-struct dvb_frontend *cx22702_attach(const struct cx22702_config *config,
-	struct i2c_adapter *i2c)
-{
-	struct cx22702_state *state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct cx22702_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-
-	/* check if the demod is there */
-	if (cx22702_readreg(state, 0x1f) != 0x3)
-		goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &cx22702_ops,
-		sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(cx22702_attach);
-
-static const struct dvb_frontend_ops cx22702_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name			= "Conexant CX22702 DVB-T",
-		.frequency_min		= 177000000,
-		.frequency_max		= 858000000,
-		.frequency_stepsize	= 166666,
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-		FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-		FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-		FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
-		FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER
-	},
-
-	.release = cx22702_release,
-
-	.init = cx22702_init,
-	.i2c_gate_ctrl = cx22702_i2c_gate_ctrl,
-
-	.set_frontend = cx22702_set_tps,
-	.get_frontend = cx22702_get_frontend,
-	.get_tune_settings = cx22702_get_tune_settings,
-
-	.read_status = cx22702_read_status,
-	.read_ber = cx22702_read_ber,
-	.read_signal_strength = cx22702_read_signal_strength,
-	.read_snr = cx22702_read_snr,
-	.read_ucblocks = cx22702_read_ucblocks,
-};
-
-MODULE_DESCRIPTION("Conexant CX22702 DVB-T Demodulator driver");
-MODULE_AUTHOR("Steven Toth");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/cx22702.h b/drivers/media/dvb/frontends/cx22702.h
deleted file mode 100644
index f154e1f..0000000
--- a/drivers/media/dvb/frontends/cx22702.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
-    Conexant 22702 DVB OFDM demodulator driver
-
-    based on:
-	Alps TDMB7 DVB OFDM demodulator driver
-
-    Copyright (C) 2001-2002 Convergence Integrated Media GmbH
-	  Holger Waechtler <holger@convergence.de>
-
-    Copyright (C) 2004 Steven Toth <stoth@linuxtv.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef CX22702_H
-#define CX22702_H
-
-#include <linux/dvb/frontend.h>
-
-struct cx22702_config {
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* serial/parallel output */
-#define CX22702_PARALLEL_OUTPUT 0
-#define CX22702_SERIAL_OUTPUT   1
-	u8 output_mode;
-};
-
-#if defined(CONFIG_DVB_CX22702) || (defined(CONFIG_DVB_CX22702_MODULE) \
-	&& defined(MODULE))
-extern struct dvb_frontend *cx22702_attach(
-	const struct cx22702_config *config,
-	struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *cx22702_attach(
-	const struct cx22702_config *config,
-	struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
deleted file mode 100644
index 3180f5b..0000000
--- a/drivers/media/dvb/frontends/cx24110.c
+++ /dev/null
@@ -1,666 +0,0 @@
-/*
-    cx24110 - Single Chip Satellite Channel Receiver driver module
-
-    Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@htp-tel.de> based on
-    work
-    Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include "dvb_frontend.h"
-#include "cx24110.h"
-
-
-struct cx24110_state {
-
-	struct i2c_adapter* i2c;
-
-	const struct cx24110_config* config;
-
-	struct dvb_frontend frontend;
-
-	u32 lastber;
-	u32 lastbler;
-	u32 lastesn0;
-};
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "cx24110: " args); \
-	} while (0)
-
-static struct {u8 reg; u8 data;} cx24110_regdata[]=
-		      /* Comments beginning with @ denote this value should
-			 be the default */
-	{{0x09,0x01}, /* SoftResetAll */
-	 {0x09,0x00}, /* release reset */
-	 {0x01,0xe8}, /* MSB of code rate 27.5MS/s */
-	 {0x02,0x17}, /* middle byte " */
-	 {0x03,0x29}, /* LSB         " */
-	 {0x05,0x03}, /* @ DVB mode, standard code rate 3/4 */
-	 {0x06,0xa5}, /* @ PLL 60MHz */
-	 {0x07,0x01}, /* @ Fclk, i.e. sampling clock, 60MHz */
-	 {0x0a,0x00}, /* @ partial chip disables, do not set */
-	 {0x0b,0x01}, /* set output clock in gapped mode, start signal low
-			 active for first byte */
-	 {0x0c,0x11}, /* no parity bytes, large hold time, serial data out */
-	 {0x0d,0x6f}, /* @ RS Sync/Unsync thresholds */
-	 {0x10,0x40}, /* chip doc is misleading here: write bit 6 as 1
-			 to avoid starting the BER counter. Reset the
-			 CRC test bit. Finite counting selected */
-	 {0x15,0xff}, /* @ size of the limited time window for RS BER
-			 estimation. It is <value>*256 RS blocks, this
-			 gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */
-	 {0x16,0x00}, /* @ enable all RS output ports */
-	 {0x17,0x04}, /* @ time window allowed for the RS to sync */
-	 {0x18,0xae}, /* @ allow all standard DVB code rates to be scanned
-			 for automatically */
-		      /* leave the current code rate and normalization
-			 registers as they are after reset... */
-	 {0x21,0x10}, /* @ during AutoAcq, search each viterbi setting
-			 only once */
-	 {0x23,0x18}, /* @ size of the limited time window for Viterbi BER
-			 estimation. It is <value>*65536 channel bits, i.e.
-			 approx. 38ms at 27.5MS/s, rate 3/4 */
-	 {0x24,0x24}, /* do not trigger Viterbi CRC test. Finite count window */
-		      /* leave front-end AGC parameters at default values */
-		      /* leave decimation AGC parameters at default values */
-	 {0x35,0x40}, /* disable all interrupts. They are not connected anyway */
-	 {0x36,0xff}, /* clear all interrupt pending flags */
-	 {0x37,0x00}, /* @ fully enable AutoAcqq state machine */
-	 {0x38,0x07}, /* @ enable fade recovery, but not autostart AutoAcq */
-		      /* leave the equalizer parameters on their default values */
-		      /* leave the final AGC parameters on their default values */
-	 {0x41,0x00}, /* @ MSB of front-end derotator frequency */
-	 {0x42,0x00}, /* @ middle bytes " */
-	 {0x43,0x00}, /* @ LSB          " */
-		      /* leave the carrier tracking loop parameters on default */
-		      /* leave the bit timing loop parameters at default */
-	 {0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */
-		      /* the cx24108 data sheet for symbol rates above 15MS/s */
-	 {0x57,0x00}, /* @ Filter sigma delta enabled, positive */
-	 {0x61,0x95}, /* GPIO pins 1-4 have special function */
-	 {0x62,0x05}, /* GPIO pin 5 has special function, pin 6 is GPIO */
-	 {0x63,0x00}, /* All GPIO pins use CMOS output characteristics */
-	 {0x64,0x20}, /* GPIO 6 is input, all others are outputs */
-	 {0x6d,0x30}, /* tuner auto mode clock freq 62kHz */
-	 {0x70,0x15}, /* use auto mode, tuner word is 21 bits long */
-	 {0x73,0x00}, /* @ disable several demod bypasses */
-	 {0x74,0x00}, /* @  " */
-	 {0x75,0x00}  /* @  " */
-		      /* the remaining registers are for SEC */
-	};
-
-
-static int cx24110_writereg (struct cx24110_state* state, int reg, int data)
-{
-	u8 buf [] = { reg, data };
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
-	int err;
-
-	if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
-		dprintk ("%s: writereg error (err == %i, reg == 0x%02x,"
-			 " data == 0x%02x)\n", __func__, err, reg, data);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int cx24110_readreg (struct cx24110_state* state, u8 reg)
-{
-	int ret;
-	u8 b0 [] = { reg };
-	u8 b1 [] = { 0 };
-	struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
-			   { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2) return ret;
-
-	return b1[0];
-}
-
-static int cx24110_set_inversion (struct cx24110_state* state, fe_spectral_inversion_t inversion)
-{
-/* fixme (low): error handling */
-
-	switch (inversion) {
-	case INVERSION_OFF:
-		cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1);
-		/* AcqSpectrInvDis on. No idea why someone should want this */
-		cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)&0xf7);
-		/* Initial value 0 at start of acq */
-		cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)&0xef);
-		/* current value 0 */
-		/* The cx24110 manual tells us this reg is read-only.
-		   But what the heck... set it ayways */
-		break;
-	case INVERSION_ON:
-		cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1);
-		/* AcqSpectrInvDis on. No idea why someone should want this */
-		cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)|0x08);
-		/* Initial value 1 at start of acq */
-		cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)|0x10);
-		/* current value 1 */
-		break;
-	case INVERSION_AUTO:
-		cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xfe);
-		/* AcqSpectrInvDis off. Leave initial & current states as is */
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int cx24110_set_fec (struct cx24110_state* state, fe_code_rate_t fec)
-{
-/* fixme (low): error handling */
-
-	static const int rate[]={-1,1,2,3,5,7,-1};
-	static const int g1[]={-1,0x01,0x02,0x05,0x15,0x45,-1};
-	static const int g2[]={-1,0x01,0x03,0x06,0x1a,0x7a,-1};
-
-	/* Well, the AutoAcq engine of the cx24106 and 24110 automatically
-	   searches all enabled viterbi rates, and can handle non-standard
-	   rates as well. */
-
-	if (fec>FEC_AUTO)
-		fec=FEC_AUTO;
-
-	if (fec==FEC_AUTO) { /* (re-)establish AutoAcq behaviour */
-		cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xdf);
-		/* clear AcqVitDis bit */
-		cx24110_writereg(state,0x18,0xae);
-		/* allow all DVB standard code rates */
-		cx24110_writereg(state,0x05,(cx24110_readreg(state,0x05)&0xf0)|0x3);
-		/* set nominal Viterbi rate 3/4 */
-		cx24110_writereg(state,0x22,(cx24110_readreg(state,0x22)&0xf0)|0x3);
-		/* set current Viterbi rate 3/4 */
-		cx24110_writereg(state,0x1a,0x05); cx24110_writereg(state,0x1b,0x06);
-		/* set the puncture registers for code rate 3/4 */
-		return 0;
-	} else {
-		cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x20);
-		/* set AcqVitDis bit */
-		if(rate[fec]>0) {
-			cx24110_writereg(state,0x05,(cx24110_readreg(state,0x05)&0xf0)|rate[fec]);
-			/* set nominal Viterbi rate */
-			cx24110_writereg(state,0x22,(cx24110_readreg(state,0x22)&0xf0)|rate[fec]);
-			/* set current Viterbi rate */
-			cx24110_writereg(state,0x1a,g1[fec]);
-			cx24110_writereg(state,0x1b,g2[fec]);
-			/* not sure if this is the right way: I always used AutoAcq mode */
-	   } else
-		   return -EOPNOTSUPP;
-/* fixme (low): which is the correct return code? */
-	};
-	return 0;
-}
-
-static fe_code_rate_t cx24110_get_fec (struct cx24110_state* state)
-{
-	int i;
-
-	i=cx24110_readreg(state,0x22)&0x0f;
-	if(!(i&0x08)) {
-		return FEC_1_2 + i - 1;
-	} else {
-/* fixme (low): a special code rate has been selected. In theory, we need to
-   return a denominator value, a numerator value, and a pair of puncture
-   maps to correctly describe this mode. But this should never happen in
-   practice, because it cannot be set by cx24110_get_fec. */
-	   return FEC_NONE;
-	}
-}
-
-static int cx24110_set_symbolrate (struct cx24110_state* state, u32 srate)
-{
-/* fixme (low): add error handling */
-	u32 ratio;
-	u32 tmp, fclk, BDRI;
-
-	static const u32 bands[]={5000000UL,15000000UL,90999000UL/2};
-	int i;
-
-	dprintk("cx24110 debug: entering %s(%d)\n",__func__,srate);
-	if (srate>90999000UL/2)
-		srate=90999000UL/2;
-	if (srate<500000)
-		srate=500000;
-
-	for(i = 0; (i < ARRAY_SIZE(bands)) && (srate>bands[i]); i++)
-		;
-	/* first, check which sample rate is appropriate: 45, 60 80 or 90 MHz,
-	   and set the PLL accordingly (R07[1:0] Fclk, R06[7:4] PLLmult,
-	   R06[3:0] PLLphaseDetGain */
-	tmp=cx24110_readreg(state,0x07)&0xfc;
-	if(srate<90999000UL/4) { /* sample rate 45MHz*/
-		cx24110_writereg(state,0x07,tmp);
-		cx24110_writereg(state,0x06,0x78);
-		fclk=90999000UL/2;
-	} else if(srate<60666000UL/2) { /* sample rate 60MHz */
-		cx24110_writereg(state,0x07,tmp|0x1);
-		cx24110_writereg(state,0x06,0xa5);
-		fclk=60666000UL;
-	} else if(srate<80888000UL/2) { /* sample rate 80MHz */
-		cx24110_writereg(state,0x07,tmp|0x2);
-		cx24110_writereg(state,0x06,0x87);
-		fclk=80888000UL;
-	} else { /* sample rate 90MHz */
-		cx24110_writereg(state,0x07,tmp|0x3);
-		cx24110_writereg(state,0x06,0x78);
-		fclk=90999000UL;
-	};
-	dprintk("cx24110 debug: fclk %d Hz\n",fclk);
-	/* we need to divide two integers with approx. 27 bits in 32 bit
-	   arithmetic giving a 25 bit result */
-	/* the maximum dividend is 90999000/2, 0x02b6446c, this number is
-	   also the most complex divisor. Hence, the dividend has,
-	   assuming 32bit unsigned arithmetic, 6 clear bits on top, the
-	   divisor 2 unused bits at the bottom. Also, the quotient is
-	   always less than 1/2. Borrowed from VES1893.c, of course */
-
-	tmp=srate<<6;
-	BDRI=fclk>>2;
-	ratio=(tmp/BDRI);
-
-	tmp=(tmp%BDRI)<<8;
-	ratio=(ratio<<8)+(tmp/BDRI);
-
-	tmp=(tmp%BDRI)<<8;
-	ratio=(ratio<<8)+(tmp/BDRI);
-
-	tmp=(tmp%BDRI)<<1;
-	ratio=(ratio<<1)+(tmp/BDRI);
-
-	dprintk("srate= %d (range %d, up to %d)\n", srate,i,bands[i]);
-	dprintk("fclk = %d\n", fclk);
-	dprintk("ratio= %08x\n", ratio);
-
-	cx24110_writereg(state, 0x1, (ratio>>16)&0xff);
-	cx24110_writereg(state, 0x2, (ratio>>8)&0xff);
-	cx24110_writereg(state, 0x3, (ratio)&0xff);
-
-	return 0;
-
-}
-
-static int _cx24110_pll_write (struct dvb_frontend* fe, const u8 buf[], int len)
-{
-	struct cx24110_state *state = fe->demodulator_priv;
-
-	if (len != 3)
-		return -EINVAL;
-
-/* tuner data is 21 bits long, must be left-aligned in data */
-/* tuner cx24108 is written through a dedicated 3wire interface on the demod chip */
-/* FIXME (low): add error handling, avoid infinite loops if HW fails... */
-
-	cx24110_writereg(state,0x6d,0x30); /* auto mode at 62kHz */
-	cx24110_writereg(state,0x70,0x15); /* auto mode 21 bits */
-
-	/* if the auto tuner writer is still busy, clear it out */
-	while (cx24110_readreg(state,0x6d)&0x80)
-		cx24110_writereg(state,0x72,0);
-
-	/* write the topmost 8 bits */
-	cx24110_writereg(state,0x72,buf[0]);
-
-	/* wait for the send to be completed */
-	while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
-		;
-
-	/* send another 8 bytes */
-	cx24110_writereg(state,0x72,buf[1]);
-	while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
-		;
-
-	/* and the topmost 5 bits of this byte */
-	cx24110_writereg(state,0x72,buf[2]);
-	while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
-		;
-
-	/* now strobe the enable line once */
-	cx24110_writereg(state,0x6d,0x32);
-	cx24110_writereg(state,0x6d,0x30);
-
-	return 0;
-}
-
-static int cx24110_initfe(struct dvb_frontend* fe)
-{
-	struct cx24110_state *state = fe->demodulator_priv;
-/* fixme (low): error handling */
-	int i;
-
-	dprintk("%s: init chip\n", __func__);
-
-	for(i = 0; i < ARRAY_SIZE(cx24110_regdata); i++) {
-		cx24110_writereg(state, cx24110_regdata[i].reg, cx24110_regdata[i].data);
-	};
-
-	return 0;
-}
-
-static int cx24110_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
-{
-	struct cx24110_state *state = fe->demodulator_priv;
-
-	switch (voltage) {
-	case SEC_VOLTAGE_13:
-		return cx24110_writereg(state,0x76,(cx24110_readreg(state,0x76)&0x3b)|0xc0);
-	case SEC_VOLTAGE_18:
-		return cx24110_writereg(state,0x76,(cx24110_readreg(state,0x76)&0x3b)|0x40);
-	default:
-		return -EINVAL;
-	};
-}
-
-static int cx24110_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
-{
-	int rv, bit;
-	struct cx24110_state *state = fe->demodulator_priv;
-	unsigned long timeout;
-
-	if (burst == SEC_MINI_A)
-		bit = 0x00;
-	else if (burst == SEC_MINI_B)
-		bit = 0x08;
-	else
-		return -EINVAL;
-
-	rv = cx24110_readreg(state, 0x77);
-	if (!(rv & 0x04))
-		cx24110_writereg(state, 0x77, rv | 0x04);
-
-	rv = cx24110_readreg(state, 0x76);
-	cx24110_writereg(state, 0x76, ((rv & 0x90) | 0x40 | bit));
-	timeout = jiffies + msecs_to_jiffies(100);
-	while (!time_after(jiffies, timeout) && !(cx24110_readreg(state, 0x76) & 0x40))
-		; /* wait for LNB ready */
-
-	return 0;
-}
-
-static int cx24110_send_diseqc_msg(struct dvb_frontend* fe,
-				   struct dvb_diseqc_master_cmd *cmd)
-{
-	int i, rv;
-	struct cx24110_state *state = fe->demodulator_priv;
-	unsigned long timeout;
-
-	if (cmd->msg_len < 3 || cmd->msg_len > 6)
-		return -EINVAL;  /* not implemented */
-
-	for (i = 0; i < cmd->msg_len; i++)
-		cx24110_writereg(state, 0x79 + i, cmd->msg[i]);
-
-	rv = cx24110_readreg(state, 0x77);
-	if (rv & 0x04) {
-		cx24110_writereg(state, 0x77, rv & ~0x04);
-		msleep(30); /* reportedly fixes switching problems */
-	}
-
-	rv = cx24110_readreg(state, 0x76);
-
-	cx24110_writereg(state, 0x76, ((rv & 0x90) | 0x40) | ((cmd->msg_len-3) & 3));
-	timeout = jiffies + msecs_to_jiffies(100);
-	while (!time_after(jiffies, timeout) && !(cx24110_readreg(state, 0x76) & 0x40))
-		; /* wait for LNB ready */
-
-	return 0;
-}
-
-static int cx24110_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct cx24110_state *state = fe->demodulator_priv;
-
-	int sync = cx24110_readreg (state, 0x55);
-
-	*status = 0;
-
-	if (sync & 0x10)
-		*status |= FE_HAS_SIGNAL;
-
-	if (sync & 0x08)
-		*status |= FE_HAS_CARRIER;
-
-	sync = cx24110_readreg (state, 0x08);
-
-	if (sync & 0x40)
-		*status |= FE_HAS_VITERBI;
-
-	if (sync & 0x20)
-		*status |= FE_HAS_SYNC;
-
-	if ((sync & 0x60) == 0x60)
-		*status |= FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int cx24110_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct cx24110_state *state = fe->demodulator_priv;
-
-	/* fixme (maybe): value range is 16 bit. Scale? */
-	if(cx24110_readreg(state,0x24)&0x10) {
-		/* the Viterbi error counter has finished one counting window */
-		cx24110_writereg(state,0x24,0x04); /* select the ber reg */
-		state->lastber=cx24110_readreg(state,0x25)|
-			(cx24110_readreg(state,0x26)<<8);
-		cx24110_writereg(state,0x24,0x04); /* start new count window */
-		cx24110_writereg(state,0x24,0x14);
-	}
-	*ber = state->lastber;
-
-	return 0;
-}
-
-static int cx24110_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength)
-{
-	struct cx24110_state *state = fe->demodulator_priv;
-
-/* no provision in hardware. Read the frontend AGC accumulator. No idea how to scale this, but I know it is 2s complement */
-	u8 signal = cx24110_readreg (state, 0x27)+128;
-	*signal_strength = (signal << 8) | signal;
-
-	return 0;
-}
-
-static int cx24110_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct cx24110_state *state = fe->demodulator_priv;
-
-	/* no provision in hardware. Can be computed from the Es/N0 estimator, but I don't know how. */
-	if(cx24110_readreg(state,0x6a)&0x80) {
-		/* the Es/N0 error counter has finished one counting window */
-		state->lastesn0=cx24110_readreg(state,0x69)|
-			(cx24110_readreg(state,0x68)<<8);
-		cx24110_writereg(state,0x6a,0x84); /* start new count window */
-	}
-	*snr = state->lastesn0;
-
-	return 0;
-}
-
-static int cx24110_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct cx24110_state *state = fe->demodulator_priv;
-
-	if(cx24110_readreg(state,0x10)&0x40) {
-		/* the RS error counter has finished one counting window */
-		cx24110_writereg(state,0x10,0x60); /* select the byer reg */
-		(void)(cx24110_readreg(state, 0x12) |
-			(cx24110_readreg(state, 0x13) << 8) |
-			(cx24110_readreg(state, 0x14) << 16));
-		cx24110_writereg(state,0x10,0x70); /* select the bler reg */
-		state->lastbler=cx24110_readreg(state,0x12)|
-			(cx24110_readreg(state,0x13)<<8)|
-			(cx24110_readreg(state,0x14)<<16);
-		cx24110_writereg(state,0x10,0x20); /* start new count window */
-	}
-	*ucblocks = state->lastbler;
-
-	return 0;
-}
-
-static int cx24110_set_frontend(struct dvb_frontend *fe)
-{
-	struct cx24110_state *state = fe->demodulator_priv;
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	cx24110_set_inversion(state, p->inversion);
-	cx24110_set_fec(state, p->fec_inner);
-	cx24110_set_symbolrate(state, p->symbol_rate);
-	cx24110_writereg(state,0x04,0x05); /* start acquisition */
-
-	return 0;
-}
-
-static int cx24110_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct cx24110_state *state = fe->demodulator_priv;
-	s32 afc; unsigned sclk;
-
-/* cannot read back tuner settings (freq). Need to have some private storage */
-
-	sclk = cx24110_readreg (state, 0x07) & 0x03;
-/* ok, real AFC (FEDR) freq. is afc/2^24*fsamp, fsamp=45/60/80/90MHz.
- * Need 64 bit arithmetic. Is thiss possible in the kernel? */
-	if (sclk==0) sclk=90999000L/2L;
-	else if (sclk==1) sclk=60666000L;
-	else if (sclk==2) sclk=80888000L;
-	else sclk=90999000L;
-	sclk>>=8;
-	afc = sclk*(cx24110_readreg (state, 0x44)&0x1f)+
-	      ((sclk*cx24110_readreg (state, 0x45))>>8)+
-	      ((sclk*cx24110_readreg (state, 0x46))>>16);
-
-	p->frequency += afc;
-	p->inversion = (cx24110_readreg (state, 0x22) & 0x10) ?
-				INVERSION_ON : INVERSION_OFF;
-	p->fec_inner = cx24110_get_fec(state);
-
-	return 0;
-}
-
-static int cx24110_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
-{
-	struct cx24110_state *state = fe->demodulator_priv;
-
-	return cx24110_writereg(state,0x76,(cx24110_readreg(state,0x76)&~0x10)|(((tone==SEC_TONE_ON))?0x10:0));
-}
-
-static void cx24110_release(struct dvb_frontend* fe)
-{
-	struct cx24110_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops cx24110_ops;
-
-struct dvb_frontend* cx24110_attach(const struct cx24110_config* config,
-				    struct i2c_adapter* i2c)
-{
-	struct cx24110_state* state = NULL;
-	int ret;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct cx24110_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->lastber = 0;
-	state->lastbler = 0;
-	state->lastesn0 = 0;
-
-	/* check if the demod is there */
-	ret = cx24110_readreg(state, 0x00);
-	if ((ret != 0x5a) && (ret != 0x69)) goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &cx24110_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops cx24110_ops = {
-	.delsys = { SYS_DVBS },
-	.info = {
-		.name = "Conexant CX24110 DVB-S",
-		.frequency_min = 950000,
-		.frequency_max = 2150000,
-		.frequency_stepsize = 1011,  /* kHz for QPSK frontends */
-		.frequency_tolerance = 29500,
-		.symbol_rate_min = 1000000,
-		.symbol_rate_max = 45000000,
-		.caps = FE_CAN_INVERSION_AUTO |
-			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK | FE_CAN_RECOVER
-	},
-
-	.release = cx24110_release,
-
-	.init = cx24110_initfe,
-	.write = _cx24110_pll_write,
-	.set_frontend = cx24110_set_frontend,
-	.get_frontend = cx24110_get_frontend,
-	.read_status = cx24110_read_status,
-	.read_ber = cx24110_read_ber,
-	.read_signal_strength = cx24110_read_signal_strength,
-	.read_snr = cx24110_read_snr,
-	.read_ucblocks = cx24110_read_ucblocks,
-
-	.diseqc_send_master_cmd = cx24110_send_diseqc_msg,
-	.set_tone = cx24110_set_tone,
-	.set_voltage = cx24110_set_voltage,
-	.diseqc_send_burst = cx24110_diseqc_send_burst,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("Conexant CX24110 DVB-S Demodulator driver");
-MODULE_AUTHOR("Peter Hettkamp");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(cx24110_attach);
diff --git a/drivers/media/dvb/frontends/cx24110.h b/drivers/media/dvb/frontends/cx24110.h
deleted file mode 100644
index fdcceee..0000000
--- a/drivers/media/dvb/frontends/cx24110.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
-    cx24110 - Single Chip Satellite Channel Receiver driver module
-
-    Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@htp-tel.de> based on
-    work
-    Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef CX24110_H
-#define CX24110_H
-
-#include <linux/dvb/frontend.h>
-
-struct cx24110_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-};
-
-static inline int cx24110_pll_write(struct dvb_frontend *fe, u32 val)
-{
-	u8 buf[] = {
-		(u8)((val >> 24) & 0xff),
-		(u8)((val >> 16) & 0xff),
-		(u8)((val >> 8) & 0xff)
-	};
-
-	if (fe->ops.write)
-		return fe->ops.write(fe, buf, 3);
-	return 0;
-}
-
-#if defined(CONFIG_DVB_CX24110) || (defined(CONFIG_DVB_CX24110_MODULE) && defined(MODULE))
-extern struct dvb_frontend* cx24110_attach(const struct cx24110_config* config,
-					   struct i2c_adapter* i2c);
-#else
-static inline struct dvb_frontend* cx24110_attach(const struct cx24110_config* config,
-						  struct i2c_adapter* i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_CX24110
-
-#endif // CX24110_H
diff --git a/drivers/media/dvb/frontends/cx24113.c b/drivers/media/dvb/frontends/cx24113.c
deleted file mode 100644
index 3883c3b..0000000
--- a/drivers/media/dvb/frontends/cx24113.c
+++ /dev/null
@@ -1,618 +0,0 @@
-/*
- *  Driver for Conexant CX24113/CX24128 Tuner (Satellite)
- *
- *  Copyright (C) 2007-8 Patrick Boettcher <pb@linuxtv.org>
- *
- *  Developed for BBTI / Technisat
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include "dvb_frontend.h"
-#include "cx24113.h"
-
-static int debug;
-
-#define cx_info(args...) do { printk(KERN_INFO "CX24113: " args); } while (0)
-#define cx_err(args...)  do { printk(KERN_ERR  "CX24113: " args); } while (0)
-
-#define dprintk(args...) \
-	do { \
-		if (debug) { \
-			printk(KERN_DEBUG "CX24113: %s: ", __func__); \
-			printk(args); \
-		} \
-	} while (0)
-
-struct cx24113_state {
-	struct i2c_adapter *i2c;
-	const struct cx24113_config *config;
-
-#define REV_CX24113 0x23
-	u8 rev;
-	u8 ver;
-
-	u8 icp_mode:1;
-
-#define ICP_LEVEL1 0
-#define ICP_LEVEL2 1
-#define ICP_LEVEL3 2
-#define ICP_LEVEL4 3
-	u8 icp_man:2;
-	u8 icp_auto_low:2;
-	u8 icp_auto_mlow:2;
-	u8 icp_auto_mhi:2;
-	u8 icp_auto_hi:2;
-	u8 icp_dig;
-
-#define LNA_MIN_GAIN 0
-#define LNA_MID_GAIN 1
-#define LNA_MAX_GAIN 2
-	u8 lna_gain:2;
-
-	u8 acp_on:1;
-
-	u8 vco_mode:2;
-	u8 vco_shift:1;
-#define VCOBANDSEL_6 0x80
-#define VCOBANDSEL_5 0x01
-#define VCOBANDSEL_4 0x02
-#define VCOBANDSEL_3 0x04
-#define VCOBANDSEL_2 0x08
-#define VCOBANDSEL_1 0x10
-	u8 vco_band;
-
-#define VCODIV4 4
-#define VCODIV2 2
-	u8 vcodiv;
-
-	u8 bs_delay:4;
-	u16 bs_freqcnt:13;
-	u16 bs_rdiv;
-	u8 prescaler_mode:1;
-
-	u8 rfvga_bias_ctrl;
-
-	s16 tuner_gain_thres;
-	u8  gain_level;
-
-	u32 frequency;
-
-	u8 refdiv;
-
-	u8 Fwindow_enabled;
-};
-
-static int cx24113_writereg(struct cx24113_state *state, int reg, int data)
-{
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg = { .addr = state->config->i2c_addr,
-		.flags = 0, .buf = buf, .len = 2 };
-	int err = i2c_transfer(state->i2c, &msg, 1);
-	if (err != 1) {
-		printk(KERN_DEBUG "%s: writereg error(err == %i, reg == 0x%02x,"
-			 " data == 0x%02x)\n", __func__, err, reg, data);
-		return err;
-	}
-
-	return 0;
-}
-
-static int cx24113_readreg(struct cx24113_state *state, u8 reg)
-{
-	int ret;
-	u8 b;
-	struct i2c_msg msg[] = {
-		{ .addr = state->config->i2c_addr,
-			.flags = 0, .buf = &reg, .len = 1 },
-		{ .addr = state->config->i2c_addr,
-			.flags = I2C_M_RD, .buf = &b, .len = 1 }
-	};
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2) {
-		printk(KERN_DEBUG "%s: reg=0x%x (error=%d)\n",
-			__func__, reg, ret);
-		return ret;
-	}
-
-	return b;
-}
-
-static void cx24113_set_parameters(struct cx24113_state *state)
-{
-	u8 r;
-
-	r = cx24113_readreg(state, 0x10) & 0x82;
-	r |= state->icp_mode;
-	r |= state->icp_man << 4;
-	r |= state->icp_dig << 2;
-	r |= state->prescaler_mode << 5;
-	cx24113_writereg(state, 0x10, r);
-
-	r = (state->icp_auto_low  << 0) | (state->icp_auto_mlow << 2)
-		| (state->icp_auto_mhi << 4) | (state->icp_auto_hi << 6);
-	cx24113_writereg(state, 0x11, r);
-
-	if (state->rev == REV_CX24113) {
-		r = cx24113_readreg(state, 0x20) & 0xec;
-		r |= state->lna_gain;
-		r |= state->rfvga_bias_ctrl << 4;
-		cx24113_writereg(state, 0x20, r);
-	}
-
-	r = cx24113_readreg(state, 0x12) & 0x03;
-	r |= state->acp_on << 2;
-	r |= state->bs_delay << 4;
-	cx24113_writereg(state, 0x12, r);
-
-	r = cx24113_readreg(state, 0x18) & 0x40;
-	r |= state->vco_shift;
-	if (state->vco_band == VCOBANDSEL_6)
-		r |= (1 << 7);
-	else
-		r |= (state->vco_band << 1);
-	cx24113_writereg(state, 0x18, r);
-
-	r  = cx24113_readreg(state, 0x14) & 0x20;
-	r |= (state->vco_mode << 6) | ((state->bs_freqcnt >> 8) & 0x1f);
-	cx24113_writereg(state, 0x14, r);
-	cx24113_writereg(state, 0x15, (state->bs_freqcnt        & 0xff));
-
-	cx24113_writereg(state, 0x16, (state->bs_rdiv >> 4) & 0xff);
-	r = (cx24113_readreg(state, 0x17) & 0x0f) |
-		((state->bs_rdiv & 0x0f) << 4);
-	cx24113_writereg(state, 0x17, r);
-}
-
-#define VGA_0 0x00
-#define VGA_1 0x04
-#define VGA_2 0x02
-#define VGA_3 0x06
-#define VGA_4 0x01
-#define VGA_5 0x05
-#define VGA_6 0x03
-#define VGA_7 0x07
-
-#define RFVGA_0 0x00
-#define RFVGA_1 0x01
-#define RFVGA_2 0x02
-#define RFVGA_3 0x03
-
-static int cx24113_set_gain_settings(struct cx24113_state *state,
-		s16 power_estimation)
-{
-	u8 ampout = cx24113_readreg(state, 0x1d) & 0xf0,
-	   vga    = cx24113_readreg(state, 0x1f) & 0x3f,
-	   rfvga  = cx24113_readreg(state, 0x20) & 0xf3;
-	u8 gain_level = power_estimation >= state->tuner_gain_thres;
-
-	dprintk("power estimation: %d, thres: %d, gain_level: %d/%d\n",
-			power_estimation, state->tuner_gain_thres,
-			state->gain_level, gain_level);
-
-	if (gain_level == state->gain_level)
-		return 0; /* nothing to be done */
-
-	ampout |= 0xf;
-
-	if (gain_level) {
-		rfvga |= RFVGA_0 << 2;
-		vga   |= (VGA_7 << 3) | VGA_7;
-	} else {
-		rfvga |= RFVGA_2 << 2;
-		vga  |= (VGA_6 << 3) | VGA_2;
-	}
-	state->gain_level = gain_level;
-
-	cx24113_writereg(state, 0x1d, ampout);
-	cx24113_writereg(state, 0x1f, vga);
-	cx24113_writereg(state, 0x20, rfvga);
-
-	return 1; /* did something */
-}
-
-static int cx24113_set_Fref(struct cx24113_state *state, u8 high)
-{
-	u8 xtal = cx24113_readreg(state, 0x02);
-	if (state->rev == 0x43 && state->vcodiv == VCODIV4)
-		high = 1;
-
-	xtal &= ~0x2;
-	if (high)
-		xtal |= high << 1;
-	return cx24113_writereg(state, 0x02, xtal);
-}
-
-static int cx24113_enable(struct cx24113_state *state, u8 enable)
-{
-	u8 r21 = (cx24113_readreg(state, 0x21) & 0xc0) | enable;
-	if (state->rev == REV_CX24113)
-		r21 |= (1 << 1);
-	return cx24113_writereg(state, 0x21, r21);
-}
-
-static int cx24113_set_bandwidth(struct cx24113_state *state, u32 bandwidth_khz)
-{
-	u8 r;
-
-	if (bandwidth_khz <= 19000)
-		r = 0x03 << 6;
-	else if (bandwidth_khz <= 25000)
-		r = 0x02 << 6;
-	else
-		r = 0x01 << 6;
-
-	dprintk("bandwidth to be set: %d\n", bandwidth_khz);
-	bandwidth_khz *= 10;
-	bandwidth_khz -= 10000;
-	bandwidth_khz /= 1000;
-	bandwidth_khz += 5;
-	bandwidth_khz /= 10;
-
-	dprintk("bandwidth: %d %d\n", r >> 6, bandwidth_khz);
-
-	r |= bandwidth_khz & 0x3f;
-
-	return cx24113_writereg(state, 0x1e, r);
-}
-
-static int cx24113_set_clk_inversion(struct cx24113_state *state, u8 on)
-{
-	u8 r = (cx24113_readreg(state, 0x10) & 0x7f) | ((on & 0x1) << 7);
-	return cx24113_writereg(state, 0x10, r);
-}
-
-static int cx24113_get_status(struct dvb_frontend *fe, u32 *status)
-{
-	struct cx24113_state *state = fe->tuner_priv;
-	u8 r = (cx24113_readreg(state, 0x10) & 0x02) >> 1;
-	if (r)
-		*status |= TUNER_STATUS_LOCKED;
-	dprintk("PLL locked: %d\n", r);
-	return 0;
-}
-
-static u8 cx24113_set_ref_div(struct cx24113_state *state, u8 refdiv)
-{
-	if (state->rev == 0x43 && state->vcodiv == VCODIV4)
-		refdiv = 2;
-	return state->refdiv = refdiv;
-}
-
-static void cx24113_calc_pll_nf(struct cx24113_state *state, u16 *n, s32 *f)
-{
-	s32 N;
-	s64 F;
-	u64 dividend;
-	u8 R, r;
-	u8 vcodiv;
-	u8 factor;
-	s32 freq_hz = state->frequency * 1000;
-
-	if (state->config->xtal_khz < 20000)
-		factor = 1;
-	else
-		factor = 2;
-
-	if (state->rev == REV_CX24113) {
-		if (state->frequency >= 1100000)
-			vcodiv = VCODIV2;
-		else
-			vcodiv = VCODIV4;
-	} else {
-		if (state->frequency >= 1165000)
-			vcodiv = VCODIV2;
-		else
-			vcodiv = VCODIV4;
-	}
-	state->vcodiv = vcodiv;
-
-	dprintk("calculating N/F for %dHz with vcodiv %d\n", freq_hz, vcodiv);
-	R = 0;
-	do {
-		R = cx24113_set_ref_div(state, R + 1);
-
-		/* calculate tuner PLL settings: */
-		N =  (freq_hz / 100 * vcodiv) * R;
-		N /= (state->config->xtal_khz) * factor * 2;
-		N += 5;     /* For round up. */
-		N /= 10;
-		N -= 32;
-	} while (N < 6 && R < 3);
-
-	if (N < 6) {
-		cx_err("strange frequency: N < 6\n");
-		return;
-	}
-	F = freq_hz;
-	F *= (u64) (R * vcodiv * 262144);
-	dprintk("1 N: %d, F: %lld, R: %d\n", N, (long long)F, R);
-	/* do_div needs an u64 as first argument */
-	dividend = F;
-	do_div(dividend, state->config->xtal_khz * 1000 * factor * 2);
-	F = dividend;
-	dprintk("2 N: %d, F: %lld, R: %d\n", N, (long long)F, R);
-	F -= (N + 32) * 262144;
-
-	dprintk("3 N: %d, F: %lld, R: %d\n", N, (long long)F, R);
-
-	if (state->Fwindow_enabled) {
-		if (F > (262144 / 2 - 1638))
-			F = 262144 / 2 - 1638;
-		if (F < (-262144 / 2 + 1638))
-			F = -262144 / 2 + 1638;
-		if ((F < 3277 && F > 0) || (F > -3277 && F < 0)) {
-			F = 0;
-			r = cx24113_readreg(state, 0x10);
-			cx24113_writereg(state, 0x10, r | (1 << 6));
-		}
-	}
-	dprintk("4 N: %d, F: %lld, R: %d\n", N, (long long)F, R);
-
-	*n = (u16) N;
-	*f = (s32) F;
-}
-
-
-static void cx24113_set_nfr(struct cx24113_state *state, u16 n, s32 f, u8 r)
-{
-	u8 reg;
-	cx24113_writereg(state, 0x19, (n >> 1) & 0xff);
-
-	reg = ((n & 0x1) << 7) | ((f >> 11) & 0x7f);
-	cx24113_writereg(state, 0x1a, reg);
-
-	cx24113_writereg(state, 0x1b, (f >> 3) & 0xff);
-
-	reg = cx24113_readreg(state, 0x1c) & 0x1f;
-	cx24113_writereg(state, 0x1c, reg | ((f & 0x7) << 5));
-
-	cx24113_set_Fref(state, r - 1);
-}
-
-static int cx24113_set_frequency(struct cx24113_state *state, u32 frequency)
-{
-	u8 r = 1; /* or 2 */
-	u16 n = 6;
-	s32 f = 0;
-
-	r = cx24113_readreg(state, 0x14);
-	cx24113_writereg(state, 0x14, r & 0x3f);
-
-	r = cx24113_readreg(state, 0x10);
-	cx24113_writereg(state, 0x10, r & 0xbf);
-
-	state->frequency = frequency;
-
-	dprintk("tuning to frequency: %d\n", frequency);
-
-	cx24113_calc_pll_nf(state, &n, &f);
-	cx24113_set_nfr(state, n, f, state->refdiv);
-
-	r = cx24113_readreg(state, 0x18) & 0xbf;
-	if (state->vcodiv != VCODIV2)
-		r |= 1 << 6;
-	cx24113_writereg(state, 0x18, r);
-
-	/* The need for this sleep is not clear. But helps in some cases */
-	msleep(5);
-
-	r = cx24113_readreg(state, 0x1c) & 0xef;
-	cx24113_writereg(state, 0x1c, r | (1 << 4));
-	return 0;
-}
-
-static int cx24113_init(struct dvb_frontend *fe)
-{
-	struct cx24113_state *state = fe->tuner_priv;
-	int ret;
-
-	state->tuner_gain_thres = -50;
-	state->gain_level = 255; /* to force a gain-setting initialization */
-	state->icp_mode = 0;
-
-	if (state->config->xtal_khz < 11000) {
-		state->icp_auto_hi  = ICP_LEVEL4;
-		state->icp_auto_mhi  = ICP_LEVEL4;
-		state->icp_auto_mlow = ICP_LEVEL3;
-		state->icp_auto_low = ICP_LEVEL3;
-	} else {
-		state->icp_auto_hi  = ICP_LEVEL4;
-		state->icp_auto_mhi  = ICP_LEVEL4;
-		state->icp_auto_mlow = ICP_LEVEL3;
-		state->icp_auto_low = ICP_LEVEL2;
-	}
-
-	state->icp_dig = ICP_LEVEL3;
-	state->icp_man = ICP_LEVEL1;
-	state->acp_on  = 1;
-	state->vco_mode = 0;
-	state->vco_shift = 0;
-	state->vco_band = VCOBANDSEL_1;
-	state->bs_delay = 8;
-	state->bs_freqcnt = 0x0fff;
-	state->bs_rdiv = 0x0fff;
-	state->prescaler_mode = 0;
-	state->lna_gain = LNA_MAX_GAIN;
-	state->rfvga_bias_ctrl = 1;
-	state->Fwindow_enabled = 1;
-
-	cx24113_set_Fref(state, 0);
-	cx24113_enable(state, 0x3d);
-	cx24113_set_parameters(state);
-
-	cx24113_set_gain_settings(state, -30);
-
-	cx24113_set_bandwidth(state, 18025);
-	cx24113_set_clk_inversion(state, 1);
-
-	if (state->config->xtal_khz >= 40000)
-		ret = cx24113_writereg(state, 0x02,
-			(cx24113_readreg(state, 0x02) & 0xfb) | (1 << 2));
-	else
-		ret = cx24113_writereg(state, 0x02,
-			(cx24113_readreg(state, 0x02) & 0xfb) | (0 << 2));
-
-	return ret;
-}
-
-static int cx24113_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct cx24113_state *state = fe->tuner_priv;
-	/* for a ROLL-OFF factor of 0.35, 0.2: 600, 0.25: 625 */
-	u32 roll_off = 675;
-	u32 bw;
-
-	bw  = ((c->symbol_rate/100) * roll_off) / 1000;
-	bw += (10000000/100) + 5;
-	bw /= 10;
-	bw += 1000;
-	cx24113_set_bandwidth(state, bw);
-
-	cx24113_set_frequency(state, c->frequency);
-	msleep(5);
-	return cx24113_get_status(fe, &bw);
-}
-
-static s8 cx24113_agc_table[2][10] = {
-	{-54, -41, -35, -30, -25, -21, -16, -10,  -6,  -2},
-	{-39, -35, -30, -25, -19, -15, -11,  -5,   1,   9},
-};
-
-void cx24113_agc_callback(struct dvb_frontend *fe)
-{
-	struct cx24113_state *state = fe->tuner_priv;
-	s16 s, i;
-	if (!fe->ops.read_signal_strength)
-		return;
-
-	do {
-		/* this only works with the current CX24123 implementation */
-		fe->ops.read_signal_strength(fe, (u16 *) &s);
-		s >>= 8;
-		dprintk("signal strength: %d\n", s);
-		for (i = 0; i < sizeof(cx24113_agc_table[0]); i++)
-			if (cx24113_agc_table[state->gain_level][i] > s)
-				break;
-		s = -25 - i*5;
-	} while (cx24113_set_gain_settings(state, s));
-}
-EXPORT_SYMBOL(cx24113_agc_callback);
-
-static int cx24113_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
-	struct cx24113_state *state = fe->tuner_priv;
-	*frequency = state->frequency;
-	return 0;
-}
-
-static int cx24113_release(struct dvb_frontend *fe)
-{
-	struct cx24113_state *state = fe->tuner_priv;
-	dprintk("\n");
-	fe->tuner_priv = NULL;
-	kfree(state);
-	return 0;
-}
-
-static const struct dvb_tuner_ops cx24113_tuner_ops = {
-	.info = {
-		.name           = "Conexant CX24113",
-		.frequency_min  = 950000,
-		.frequency_max  = 2150000,
-		.frequency_step = 125,
-	},
-
-	.release       = cx24113_release,
-
-	.init          = cx24113_init,
-
-	.set_params    = cx24113_set_params,
-	.get_frequency = cx24113_get_frequency,
-	.get_status    = cx24113_get_status,
-};
-
-struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe,
-		const struct cx24113_config *config, struct i2c_adapter *i2c)
-{
-	/* allocate memory for the internal state */
-	struct cx24113_state *state =
-		kzalloc(sizeof(struct cx24113_state), GFP_KERNEL);
-	int rc;
-	if (state == NULL) {
-		cx_err("Unable to kzalloc\n");
-		goto error;
-	}
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-
-	cx_info("trying to detect myself\n");
-
-	/* making a dummy read, because of some expected troubles
-	 * after power on */
-	cx24113_readreg(state, 0x00);
-
-	rc = cx24113_readreg(state, 0x00);
-	if (rc < 0) {
-		cx_info("CX24113 not found.\n");
-		goto error;
-	}
-	state->rev = rc;
-
-	switch (rc) {
-	case 0x43:
-		cx_info("detected CX24113 variant\n");
-		break;
-	case REV_CX24113:
-		cx_info("successfully detected\n");
-		break;
-	default:
-		cx_err("unsupported device id: %x\n", state->rev);
-		goto error;
-	}
-	state->ver = cx24113_readreg(state, 0x01);
-	cx_info("version: %x\n", state->ver);
-
-	/* create dvb_frontend */
-	memcpy(&fe->ops.tuner_ops, &cx24113_tuner_ops,
-			sizeof(struct dvb_tuner_ops));
-	fe->tuner_priv = state;
-	return fe;
-
-error:
-	kfree(state);
-
-	return NULL;
-}
-EXPORT_SYMBOL(cx24113_attach);
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
-
-MODULE_AUTHOR("Patrick Boettcher <pb@linuxtv.org>");
-MODULE_DESCRIPTION("DVB Frontend module for Conexant CX24113/CX24128hardware");
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/media/dvb/frontends/cx24113.h b/drivers/media/dvb/frontends/cx24113.h
deleted file mode 100644
index 01eb7b9..0000000
--- a/drivers/media/dvb/frontends/cx24113.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  Driver for Conexant CX24113/CX24128 Tuner (Satellite)
- *
- *  Copyright (C) 2007-8 Patrick Boettcher <pb@linuxtv.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef CX24113_H
-#define CX24113_H
-
-struct dvb_frontend;
-
-struct cx24113_config {
-	u8 i2c_addr; /* 0x14 or 0x54 */
-
-	u32 xtal_khz;
-};
-
-#if defined(CONFIG_DVB_TUNER_CX24113) || \
-	(defined(CONFIG_DVB_TUNER_CX24113_MODULE) && defined(MODULE))
-extern struct dvb_frontend *cx24113_attach(struct dvb_frontend *,
-	const struct cx24113_config *config, struct i2c_adapter *i2c);
-
-extern void cx24113_agc_callback(struct dvb_frontend *fe);
-#else
-static inline struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe,
-	const struct cx24113_config *config, struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-static inline void cx24113_agc_callback(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-}
-#endif
-
-#endif /* CX24113_H */
diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c
deleted file mode 100644
index b488791..0000000
--- a/drivers/media/dvb/frontends/cx24116.c
+++ /dev/null
@@ -1,1508 +0,0 @@
-/*
-    Conexant cx24116/cx24118 - DVBS/S2 Satellite demod/tuner driver
-
-    Copyright (C) 2006-2008 Steven Toth <stoth@hauppauge.com>
-    Copyright (C) 2006-2007 Georg Acher
-    Copyright (C) 2007-2008 Darron Broad
-	March 2007
-	    Fixed some bugs.
-	    Added diseqc support.
-	    Added corrected signal strength support.
-	August 2007
-	    Sync with legacy version.
-	    Some clean ups.
-    Copyright (C) 2008 Igor Liplianin
-	September, 9th 2008
-	    Fixed locking on high symbol rates (>30000).
-	    Implement MPEG initialization parameter.
-	January, 17th 2009
-	    Fill set_voltage with actually control voltage code.
-	    Correct set tone to not affect voltage.
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/firmware.h>
-
-#include "dvb_frontend.h"
-#include "cx24116.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
-
-#define dprintk(args...) \
-	do { \
-		if (debug) \
-			printk(KERN_INFO "cx24116: " args); \
-	} while (0)
-
-#define CX24116_DEFAULT_FIRMWARE "dvb-fe-cx24116.fw"
-#define CX24116_SEARCH_RANGE_KHZ 5000
-
-/* known registers */
-#define CX24116_REG_COMMAND (0x00)      /* command args 0x00..0x1e */
-#define CX24116_REG_EXECUTE (0x1f)      /* execute command */
-#define CX24116_REG_MAILBOX (0x96)      /* FW or multipurpose mailbox? */
-#define CX24116_REG_RESET   (0x20)      /* reset status > 0     */
-#define CX24116_REG_SIGNAL  (0x9e)      /* signal low           */
-#define CX24116_REG_SSTATUS (0x9d)      /* signal high / status */
-#define CX24116_REG_QUALITY8 (0xa3)
-#define CX24116_REG_QSTATUS (0xbc)
-#define CX24116_REG_QUALITY0 (0xd5)
-#define CX24116_REG_BER0    (0xc9)
-#define CX24116_REG_BER8    (0xc8)
-#define CX24116_REG_BER16   (0xc7)
-#define CX24116_REG_BER24   (0xc6)
-#define CX24116_REG_UCB0    (0xcb)
-#define CX24116_REG_UCB8    (0xca)
-#define CX24116_REG_CLKDIV  (0xf3)
-#define CX24116_REG_RATEDIV (0xf9)
-
-/* configured fec (not tuned) or actual FEC (tuned) 1=1/2 2=2/3 etc */
-#define CX24116_REG_FECSTATUS (0x9c)
-
-/* FECSTATUS bits */
-/* mask to determine configured fec (not tuned) or actual fec (tuned) */
-#define CX24116_FEC_FECMASK   (0x1f)
-
-/* Select DVB-S demodulator, else DVB-S2 */
-#define CX24116_FEC_DVBS      (0x20)
-#define CX24116_FEC_UNKNOWN   (0x40)    /* Unknown/unused */
-
-/* Pilot mode requested when tuning else always reset when tuned */
-#define CX24116_FEC_PILOT     (0x80)
-
-/* arg buffer size */
-#define CX24116_ARGLEN (0x1e)
-
-/* rolloff */
-#define CX24116_ROLLOFF_020 (0x00)
-#define CX24116_ROLLOFF_025 (0x01)
-#define CX24116_ROLLOFF_035 (0x02)
-
-/* pilot bit */
-#define CX24116_PILOT_OFF (0x00)
-#define CX24116_PILOT_ON (0x40)
-
-/* signal status */
-#define CX24116_HAS_SIGNAL   (0x01)
-#define CX24116_HAS_CARRIER  (0x02)
-#define CX24116_HAS_VITERBI  (0x04)
-#define CX24116_HAS_SYNCLOCK (0x08)
-#define CX24116_HAS_UNKNOWN1 (0x10)
-#define CX24116_HAS_UNKNOWN2 (0x20)
-#define CX24116_STATUS_MASK  (0x0f)
-#define CX24116_SIGNAL_MASK  (0xc0)
-
-#define CX24116_DISEQC_TONEOFF   (0)    /* toneburst never sent */
-#define CX24116_DISEQC_TONECACHE (1)    /* toneburst cached     */
-#define CX24116_DISEQC_MESGCACHE (2)    /* message cached       */
-
-/* arg offset for DiSEqC */
-#define CX24116_DISEQC_BURST  (1)
-#define CX24116_DISEQC_ARG2_2 (2)   /* unknown value=2 */
-#define CX24116_DISEQC_ARG3_0 (3)   /* unknown value=0 */
-#define CX24116_DISEQC_ARG4_0 (4)   /* unknown value=0 */
-#define CX24116_DISEQC_MSGLEN (5)
-#define CX24116_DISEQC_MSGOFS (6)
-
-/* DiSEqC burst */
-#define CX24116_DISEQC_MINI_A (0)
-#define CX24116_DISEQC_MINI_B (1)
-
-/* DiSEqC tone burst */
-static int toneburst = 1;
-module_param(toneburst, int, 0644);
-MODULE_PARM_DESC(toneburst, "DiSEqC toneburst 0=OFF, 1=TONE CACHE, "\
-	"2=MESSAGE CACHE (default:1)");
-
-/* SNR measurements */
-static int esno_snr;
-module_param(esno_snr, int, 0644);
-MODULE_PARM_DESC(esno_snr, "SNR return units, 0=PERCENTAGE 0-100, "\
-	"1=ESNO(db * 10) (default:0)");
-
-enum cmds {
-	CMD_SET_VCO     = 0x10,
-	CMD_TUNEREQUEST = 0x11,
-	CMD_MPEGCONFIG  = 0x13,
-	CMD_TUNERINIT   = 0x14,
-	CMD_BANDWIDTH   = 0x15,
-	CMD_GETAGC      = 0x19,
-	CMD_LNBCONFIG   = 0x20,
-	CMD_LNBSEND     = 0x21, /* Formerly CMD_SEND_DISEQC */
-	CMD_LNBDCLEVEL  = 0x22,
-	CMD_SET_TONE    = 0x23,
-	CMD_UPDFWVERS   = 0x35,
-	CMD_TUNERSLEEP  = 0x36,
-	CMD_AGCCONTROL  = 0x3b, /* Unknown */
-};
-
-/* The Demod/Tuner can't easily provide these, we cache them */
-struct cx24116_tuning {
-	u32 frequency;
-	u32 symbol_rate;
-	fe_spectral_inversion_t inversion;
-	fe_code_rate_t fec;
-
-	fe_delivery_system_t delsys;
-	fe_modulation_t modulation;
-	fe_pilot_t pilot;
-	fe_rolloff_t rolloff;
-
-	/* Demod values */
-	u8 fec_val;
-	u8 fec_mask;
-	u8 inversion_val;
-	u8 pilot_val;
-	u8 rolloff_val;
-};
-
-/* Basic commands that are sent to the firmware */
-struct cx24116_cmd {
-	u8 len;
-	u8 args[CX24116_ARGLEN];
-};
-
-struct cx24116_state {
-	struct i2c_adapter *i2c;
-	const struct cx24116_config *config;
-
-	struct dvb_frontend frontend;
-
-	struct cx24116_tuning dcur;
-	struct cx24116_tuning dnxt;
-
-	u8 skip_fw_load;
-	u8 burst;
-	struct cx24116_cmd dsec_cmd;
-};
-
-static int cx24116_writereg(struct cx24116_state *state, int reg, int data)
-{
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg = { .addr = state->config->demod_address,
-		.flags = 0, .buf = buf, .len = 2 };
-	int err;
-
-	if (debug > 1)
-		printk("cx24116: %s: write reg 0x%02x, value 0x%02x\n",
-			__func__, reg, data);
-
-	err = i2c_transfer(state->i2c, &msg, 1);
-	if (err != 1) {
-		printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x,"
-			 " value == 0x%02x)\n", __func__, err, reg, data);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-/* Bulk byte writes to a single I2C address, for 32k firmware load */
-static int cx24116_writeregN(struct cx24116_state *state, int reg,
-			     const u8 *data, u16 len)
-{
-	int ret = -EREMOTEIO;
-	struct i2c_msg msg;
-	u8 *buf;
-
-	buf = kmalloc(len + 1, GFP_KERNEL);
-	if (buf == NULL) {
-		printk("Unable to kmalloc\n");
-		ret = -ENOMEM;
-		goto error;
-	}
-
-	*(buf) = reg;
-	memcpy(buf + 1, data, len);
-
-	msg.addr = state->config->demod_address;
-	msg.flags = 0;
-	msg.buf = buf;
-	msg.len = len + 1;
-
-	if (debug > 1)
-		printk(KERN_INFO "cx24116: %s:  write regN 0x%02x, len = %d\n",
-			__func__, reg, len);
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-	if (ret != 1) {
-		printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x\n",
-			 __func__, ret, reg);
-		ret = -EREMOTEIO;
-	}
-
-error:
-	kfree(buf);
-
-	return ret;
-}
-
-static int cx24116_readreg(struct cx24116_state *state, u8 reg)
-{
-	int ret;
-	u8 b0[] = { reg };
-	u8 b1[] = { 0 };
-	struct i2c_msg msg[] = {
-		{ .addr = state->config->demod_address, .flags = 0,
-			.buf = b0, .len = 1 },
-		{ .addr = state->config->demod_address, .flags = I2C_M_RD,
-			.buf = b1, .len = 1 }
-	};
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2) {
-		printk(KERN_ERR "%s: reg=0x%x (error=%d)\n",
-			__func__, reg, ret);
-		return ret;
-	}
-
-	if (debug > 1)
-		printk(KERN_INFO "cx24116: read reg 0x%02x, value 0x%02x\n",
-			reg, b1[0]);
-
-	return b1[0];
-}
-
-static int cx24116_set_inversion(struct cx24116_state *state,
-	fe_spectral_inversion_t inversion)
-{
-	dprintk("%s(%d)\n", __func__, inversion);
-
-	switch (inversion) {
-	case INVERSION_OFF:
-		state->dnxt.inversion_val = 0x00;
-		break;
-	case INVERSION_ON:
-		state->dnxt.inversion_val = 0x04;
-		break;
-	case INVERSION_AUTO:
-		state->dnxt.inversion_val = 0x0C;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	state->dnxt.inversion = inversion;
-
-	return 0;
-}
-
-/*
- * modfec (modulation and FEC)
- * ===========================
- *
- * MOD          FEC             mask/val    standard
- * ----         --------        ----------- --------
- * QPSK         FEC_1_2         0x02 0x02+X DVB-S
- * QPSK         FEC_2_3         0x04 0x02+X DVB-S
- * QPSK         FEC_3_4         0x08 0x02+X DVB-S
- * QPSK         FEC_4_5         0x10 0x02+X DVB-S (?)
- * QPSK         FEC_5_6         0x20 0x02+X DVB-S
- * QPSK         FEC_6_7         0x40 0x02+X DVB-S
- * QPSK         FEC_7_8         0x80 0x02+X DVB-S
- * QPSK         FEC_8_9         0x01 0x02+X DVB-S (?) (NOT SUPPORTED?)
- * QPSK         AUTO            0xff 0x02+X DVB-S
- *
- * For DVB-S high byte probably represents FEC
- * and low byte selects the modulator. The high
- * byte is search range mask. Bit 5 may turn
- * on DVB-S and remaining bits represent some
- * kind of calibration (how/what i do not know).
- *
- * Eg.(2/3) szap "Zone Horror"
- *
- * mask/val = 0x04, 0x20
- * status 1f | signal c3c0 | snr a333 | ber 00000098 | unc 0 | FE_HAS_LOCK
- *
- * mask/val = 0x04, 0x30
- * status 1f | signal c3c0 | snr a333 | ber 00000000 | unc 0 | FE_HAS_LOCK
- *
- * After tuning FECSTATUS contains actual FEC
- * in use numbered 1 through to 8 for 1/2 .. 2/3 etc
- *
- * NBC=NOT/NON BACKWARD COMPATIBLE WITH DVB-S (DVB-S2 only)
- *
- * NBC-QPSK     FEC_1_2         0x00, 0x04      DVB-S2
- * NBC-QPSK     FEC_3_5         0x00, 0x05      DVB-S2
- * NBC-QPSK     FEC_2_3         0x00, 0x06      DVB-S2
- * NBC-QPSK     FEC_3_4         0x00, 0x07      DVB-S2
- * NBC-QPSK     FEC_4_5         0x00, 0x08      DVB-S2
- * NBC-QPSK     FEC_5_6         0x00, 0x09      DVB-S2
- * NBC-QPSK     FEC_8_9         0x00, 0x0a      DVB-S2
- * NBC-QPSK     FEC_9_10        0x00, 0x0b      DVB-S2
- *
- * NBC-8PSK     FEC_3_5         0x00, 0x0c      DVB-S2
- * NBC-8PSK     FEC_2_3         0x00, 0x0d      DVB-S2
- * NBC-8PSK     FEC_3_4         0x00, 0x0e      DVB-S2
- * NBC-8PSK     FEC_5_6         0x00, 0x0f      DVB-S2
- * NBC-8PSK     FEC_8_9         0x00, 0x10      DVB-S2
- * NBC-8PSK     FEC_9_10        0x00, 0x11      DVB-S2
- *
- * For DVB-S2 low bytes selects both modulator
- * and FEC. High byte is meaningless here. To
- * set pilot, bit 6 (0x40) is set. When inspecting
- * FECSTATUS bit 7 (0x80) represents the pilot
- * selection whilst not tuned. When tuned, actual FEC
- * in use is found in FECSTATUS as per above. Pilot
- * value is reset.
- */
-
-/* A table of modulation, fec and configuration bytes for the demod.
- * Not all S2 mmodulation schemes are support and not all rates with
- * a scheme are support. Especially, no auto detect when in S2 mode.
- */
-static struct cx24116_modfec {
-	fe_delivery_system_t delivery_system;
-	fe_modulation_t modulation;
-	fe_code_rate_t fec;
-	u8 mask;	/* In DVBS mode this is used to autodetect */
-	u8 val;		/* Passed to the firmware to indicate mode selection */
-} CX24116_MODFEC_MODES[] = {
- /* QPSK. For unknown rates we set hardware to auto detect 0xfe 0x30 */
-
- /*mod   fec       mask  val */
- { SYS_DVBS, QPSK, FEC_NONE, 0xfe, 0x30 },
- { SYS_DVBS, QPSK, FEC_1_2,  0x02, 0x2e }, /* 00000010 00101110 */
- { SYS_DVBS, QPSK, FEC_2_3,  0x04, 0x2f }, /* 00000100 00101111 */
- { SYS_DVBS, QPSK, FEC_3_4,  0x08, 0x30 }, /* 00001000 00110000 */
- { SYS_DVBS, QPSK, FEC_4_5,  0xfe, 0x30 }, /* 000?0000 ?        */
- { SYS_DVBS, QPSK, FEC_5_6,  0x20, 0x31 }, /* 00100000 00110001 */
- { SYS_DVBS, QPSK, FEC_6_7,  0xfe, 0x30 }, /* 0?000000 ?        */
- { SYS_DVBS, QPSK, FEC_7_8,  0x80, 0x32 }, /* 10000000 00110010 */
- { SYS_DVBS, QPSK, FEC_8_9,  0xfe, 0x30 }, /* 0000000? ?        */
- { SYS_DVBS, QPSK, FEC_AUTO, 0xfe, 0x30 },
- /* NBC-QPSK */
- { SYS_DVBS2, QPSK, FEC_1_2,  0x00, 0x04 },
- { SYS_DVBS2, QPSK, FEC_3_5,  0x00, 0x05 },
- { SYS_DVBS2, QPSK, FEC_2_3,  0x00, 0x06 },
- { SYS_DVBS2, QPSK, FEC_3_4,  0x00, 0x07 },
- { SYS_DVBS2, QPSK, FEC_4_5,  0x00, 0x08 },
- { SYS_DVBS2, QPSK, FEC_5_6,  0x00, 0x09 },
- { SYS_DVBS2, QPSK, FEC_8_9,  0x00, 0x0a },
- { SYS_DVBS2, QPSK, FEC_9_10, 0x00, 0x0b },
- /* 8PSK */
- { SYS_DVBS2, PSK_8, FEC_3_5,  0x00, 0x0c },
- { SYS_DVBS2, PSK_8, FEC_2_3,  0x00, 0x0d },
- { SYS_DVBS2, PSK_8, FEC_3_4,  0x00, 0x0e },
- { SYS_DVBS2, PSK_8, FEC_5_6,  0x00, 0x0f },
- { SYS_DVBS2, PSK_8, FEC_8_9,  0x00, 0x10 },
- { SYS_DVBS2, PSK_8, FEC_9_10, 0x00, 0x11 },
- /*
-  * `val' can be found in the FECSTATUS register when tuning.
-  * FECSTATUS will give the actual FEC in use if tuning was successful.
-  */
-};
-
-static int cx24116_lookup_fecmod(struct cx24116_state *state,
-	fe_delivery_system_t d, fe_modulation_t m, fe_code_rate_t f)
-{
-	int i, ret = -EOPNOTSUPP;
-
-	dprintk("%s(0x%02x,0x%02x)\n", __func__, m, f);
-
-	for (i = 0; i < ARRAY_SIZE(CX24116_MODFEC_MODES); i++) {
-		if ((d == CX24116_MODFEC_MODES[i].delivery_system) &&
-			(m == CX24116_MODFEC_MODES[i].modulation) &&
-			(f == CX24116_MODFEC_MODES[i].fec)) {
-				ret = i;
-				break;
-			}
-	}
-
-	return ret;
-}
-
-static int cx24116_set_fec(struct cx24116_state *state,
-	fe_delivery_system_t delsys, fe_modulation_t mod, fe_code_rate_t fec)
-{
-	int ret = 0;
-
-	dprintk("%s(0x%02x,0x%02x)\n", __func__, mod, fec);
-
-	ret = cx24116_lookup_fecmod(state, delsys, mod, fec);
-
-	if (ret < 0)
-		return ret;
-
-	state->dnxt.fec = fec;
-	state->dnxt.fec_val = CX24116_MODFEC_MODES[ret].val;
-	state->dnxt.fec_mask = CX24116_MODFEC_MODES[ret].mask;
-	dprintk("%s() mask/val = 0x%02x/0x%02x\n", __func__,
-		state->dnxt.fec_mask, state->dnxt.fec_val);
-
-	return 0;
-}
-
-static int cx24116_set_symbolrate(struct cx24116_state *state, u32 rate)
-{
-	dprintk("%s(%d)\n", __func__, rate);
-
-	/*  check if symbol rate is within limits */
-	if ((rate > state->frontend.ops.info.symbol_rate_max) ||
-	    (rate < state->frontend.ops.info.symbol_rate_min)) {
-		dprintk("%s() unsupported symbol_rate = %d\n", __func__, rate);
-		return -EOPNOTSUPP;
-	}
-
-	state->dnxt.symbol_rate = rate;
-	dprintk("%s() symbol_rate = %d\n", __func__, rate);
-
-	return 0;
-}
-
-static int cx24116_load_firmware(struct dvb_frontend *fe,
-	const struct firmware *fw);
-
-static int cx24116_firmware_ondemand(struct dvb_frontend *fe)
-{
-	struct cx24116_state *state = fe->demodulator_priv;
-	const struct firmware *fw;
-	int ret = 0;
-
-	dprintk("%s()\n", __func__);
-
-	if (cx24116_readreg(state, 0x20) > 0) {
-
-		if (state->skip_fw_load)
-			return 0;
-
-		/* Load firmware */
-		/* request the firmware, this will block until loaded */
-		printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n",
-			__func__, CX24116_DEFAULT_FIRMWARE);
-		ret = request_firmware(&fw, CX24116_DEFAULT_FIRMWARE,
-			state->i2c->dev.parent);
-		printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n",
-			__func__);
-		if (ret) {
-			printk(KERN_ERR "%s: No firmware uploaded "
-				"(timeout or file not found?)\n", __func__);
-			return ret;
-		}
-
-		/* Make sure we don't recurse back through here
-		 * during loading */
-		state->skip_fw_load = 1;
-
-		ret = cx24116_load_firmware(fe, fw);
-		if (ret)
-			printk(KERN_ERR "%s: Writing firmware to device failed\n",
-				__func__);
-
-		release_firmware(fw);
-
-		printk(KERN_INFO "%s: Firmware upload %s\n", __func__,
-			ret == 0 ? "complete" : "failed");
-
-		/* Ensure firmware is always loaded if required */
-		state->skip_fw_load = 0;
-	}
-
-	return ret;
-}
-
-/* Take a basic firmware command structure, format it
- * and forward it for processing
- */
-static int cx24116_cmd_execute(struct dvb_frontend *fe, struct cx24116_cmd *cmd)
-{
-	struct cx24116_state *state = fe->demodulator_priv;
-	int i, ret;
-
-	dprintk("%s()\n", __func__);
-
-	/* Load the firmware if required */
-	ret = cx24116_firmware_ondemand(fe);
-	if (ret != 0) {
-		printk(KERN_ERR "%s(): Unable initialise the firmware\n",
-			__func__);
-		return ret;
-	}
-
-	/* Write the command */
-	for (i = 0; i < cmd->len ; i++) {
-		dprintk("%s: 0x%02x == 0x%02x\n", __func__, i, cmd->args[i]);
-		cx24116_writereg(state, i, cmd->args[i]);
-	}
-
-	/* Start execution and wait for cmd to terminate */
-	cx24116_writereg(state, CX24116_REG_EXECUTE, 0x01);
-	while (cx24116_readreg(state, CX24116_REG_EXECUTE)) {
-		msleep(10);
-		if (i++ > 64) {
-			/* Avoid looping forever if the firmware does
-				not respond */
-			printk(KERN_WARNING "%s() Firmware not responding\n",
-				__func__);
-			return -EREMOTEIO;
-		}
-	}
-	return 0;
-}
-
-static int cx24116_load_firmware(struct dvb_frontend *fe,
-	const struct firmware *fw)
-{
-	struct cx24116_state *state = fe->demodulator_priv;
-	struct cx24116_cmd cmd;
-	int i, ret, len, max, remaining;
-	unsigned char vers[4];
-
-	dprintk("%s\n", __func__);
-	dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n",
-			fw->size,
-			fw->data[0],
-			fw->data[1],
-			fw->data[fw->size-2],
-			fw->data[fw->size-1]);
-
-	/* Toggle 88x SRST pin to reset demod */
-	if (state->config->reset_device)
-		state->config->reset_device(fe);
-
-	/* Begin the firmware load process */
-	/* Prepare the demod, load the firmware, cleanup after load */
-
-	/* Init PLL */
-	cx24116_writereg(state, 0xE5, 0x00);
-	cx24116_writereg(state, 0xF1, 0x08);
-	cx24116_writereg(state, 0xF2, 0x13);
-
-	/* Start PLL */
-	cx24116_writereg(state, 0xe0, 0x03);
-	cx24116_writereg(state, 0xe0, 0x00);
-
-	/* Unknown */
-	cx24116_writereg(state, CX24116_REG_CLKDIV, 0x46);
-	cx24116_writereg(state, CX24116_REG_RATEDIV, 0x00);
-
-	/* Unknown */
-	cx24116_writereg(state, 0xF0, 0x03);
-	cx24116_writereg(state, 0xF4, 0x81);
-	cx24116_writereg(state, 0xF5, 0x00);
-	cx24116_writereg(state, 0xF6, 0x00);
-
-	/* Split firmware to the max I2C write len and write.
-	 * Writes whole firmware as one write when i2c_wr_max is set to 0. */
-	if (state->config->i2c_wr_max)
-		max = state->config->i2c_wr_max;
-	else
-		max = INT_MAX; /* enough for 32k firmware */
-
-	for (remaining = fw->size; remaining > 0; remaining -= max - 1) {
-		len = remaining;
-		if (len > max - 1)
-			len = max - 1;
-
-		cx24116_writeregN(state, 0xF7, &fw->data[fw->size - remaining],
-			len);
-	}
-
-	cx24116_writereg(state, 0xF4, 0x10);
-	cx24116_writereg(state, 0xF0, 0x00);
-	cx24116_writereg(state, 0xF8, 0x06);
-
-	/* Firmware CMD 10: VCO config */
-	cmd.args[0x00] = CMD_SET_VCO;
-	cmd.args[0x01] = 0x05;
-	cmd.args[0x02] = 0xdc;
-	cmd.args[0x03] = 0xda;
-	cmd.args[0x04] = 0xae;
-	cmd.args[0x05] = 0xaa;
-	cmd.args[0x06] = 0x04;
-	cmd.args[0x07] = 0x9d;
-	cmd.args[0x08] = 0xfc;
-	cmd.args[0x09] = 0x06;
-	cmd.len = 0x0a;
-	ret = cx24116_cmd_execute(fe, &cmd);
-	if (ret != 0)
-		return ret;
-
-	cx24116_writereg(state, CX24116_REG_SSTATUS, 0x00);
-
-	/* Firmware CMD 14: Tuner config */
-	cmd.args[0x00] = CMD_TUNERINIT;
-	cmd.args[0x01] = 0x00;
-	cmd.args[0x02] = 0x00;
-	cmd.len = 0x03;
-	ret = cx24116_cmd_execute(fe, &cmd);
-	if (ret != 0)
-		return ret;
-
-	cx24116_writereg(state, 0xe5, 0x00);
-
-	/* Firmware CMD 13: MPEG config */
-	cmd.args[0x00] = CMD_MPEGCONFIG;
-	cmd.args[0x01] = 0x01;
-	cmd.args[0x02] = 0x75;
-	cmd.args[0x03] = 0x00;
-	if (state->config->mpg_clk_pos_pol)
-		cmd.args[0x04] = state->config->mpg_clk_pos_pol;
-	else
-		cmd.args[0x04] = 0x02;
-	cmd.args[0x05] = 0x00;
-	cmd.len = 0x06;
-	ret = cx24116_cmd_execute(fe, &cmd);
-	if (ret != 0)
-		return ret;
-
-	/* Firmware CMD 35: Get firmware version */
-	cmd.args[0x00] = CMD_UPDFWVERS;
-	cmd.len = 0x02;
-	for (i = 0; i < 4; i++) {
-		cmd.args[0x01] = i;
-		ret = cx24116_cmd_execute(fe, &cmd);
-		if (ret != 0)
-			return ret;
-		vers[i] = cx24116_readreg(state, CX24116_REG_MAILBOX);
-	}
-	printk(KERN_INFO "%s: FW version %i.%i.%i.%i\n", __func__,
-		vers[0], vers[1], vers[2], vers[3]);
-
-	return 0;
-}
-
-static int cx24116_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct cx24116_state *state = fe->demodulator_priv;
-
-	int lock = cx24116_readreg(state, CX24116_REG_SSTATUS) &
-		CX24116_STATUS_MASK;
-
-	dprintk("%s: status = 0x%02x\n", __func__, lock);
-
-	*status = 0;
-
-	if (lock & CX24116_HAS_SIGNAL)
-		*status |= FE_HAS_SIGNAL;
-	if (lock & CX24116_HAS_CARRIER)
-		*status |= FE_HAS_CARRIER;
-	if (lock & CX24116_HAS_VITERBI)
-		*status |= FE_HAS_VITERBI;
-	if (lock & CX24116_HAS_SYNCLOCK)
-		*status |= FE_HAS_SYNC | FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int cx24116_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct cx24116_state *state = fe->demodulator_priv;
-
-	dprintk("%s()\n", __func__);
-
-	*ber =  (cx24116_readreg(state, CX24116_REG_BER24) << 24) |
-		(cx24116_readreg(state, CX24116_REG_BER16) << 16) |
-		(cx24116_readreg(state, CX24116_REG_BER8)  << 8)  |
-		 cx24116_readreg(state, CX24116_REG_BER0);
-
-	return 0;
-}
-
-/* TODO Determine function and scale appropriately */
-static int cx24116_read_signal_strength(struct dvb_frontend *fe,
-	u16 *signal_strength)
-{
-	struct cx24116_state *state = fe->demodulator_priv;
-	struct cx24116_cmd cmd;
-	int ret;
-	u16 sig_reading;
-
-	dprintk("%s()\n", __func__);
-
-	/* Firmware CMD 19: Get AGC */
-	cmd.args[0x00] = CMD_GETAGC;
-	cmd.len = 0x01;
-	ret = cx24116_cmd_execute(fe, &cmd);
-	if (ret != 0)
-		return ret;
-
-	sig_reading =
-		(cx24116_readreg(state,
-			CX24116_REG_SSTATUS) & CX24116_SIGNAL_MASK) |
-		(cx24116_readreg(state, CX24116_REG_SIGNAL) << 6);
-	*signal_strength = 0 - sig_reading;
-
-	dprintk("%s: raw / cooked = 0x%04x / 0x%04x\n",
-		__func__, sig_reading, *signal_strength);
-
-	return 0;
-}
-
-/* SNR (0..100)% = (sig & 0xf0) * 10 + (sig & 0x0f) * 10 / 16 */
-static int cx24116_read_snr_pct(struct dvb_frontend *fe, u16 *snr)
-{
-	struct cx24116_state *state = fe->demodulator_priv;
-	u8 snr_reading;
-	static const u32 snr_tab[] = { /* 10 x Table (rounded up) */
-		0x00000, 0x0199A, 0x03333, 0x04ccD, 0x06667,
-		0x08000, 0x0999A, 0x0b333, 0x0cccD, 0x0e667,
-		0x10000, 0x1199A, 0x13333, 0x14ccD, 0x16667,
-		0x18000 };
-
-	dprintk("%s()\n", __func__);
-
-	snr_reading = cx24116_readreg(state, CX24116_REG_QUALITY0);
-
-	if (snr_reading >= 0xa0 /* 100% */)
-		*snr = 0xffff;
-	else
-		*snr = snr_tab[(snr_reading & 0xf0) >> 4] +
-			(snr_tab[(snr_reading & 0x0f)] >> 4);
-
-	dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__,
-		snr_reading, *snr);
-
-	return 0;
-}
-
-/* The reelbox patches show the value in the registers represents
- * ESNO, from 0->30db (values 0->300). We provide this value by
- * default.
- */
-static int cx24116_read_snr_esno(struct dvb_frontend *fe, u16 *snr)
-{
-	struct cx24116_state *state = fe->demodulator_priv;
-
-	dprintk("%s()\n", __func__);
-
-	*snr = cx24116_readreg(state, CX24116_REG_QUALITY8) << 8 |
-		cx24116_readreg(state, CX24116_REG_QUALITY0);
-
-	dprintk("%s: raw 0x%04x\n", __func__, *snr);
-
-	return 0;
-}
-
-static int cx24116_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	if (esno_snr == 1)
-		return cx24116_read_snr_esno(fe, snr);
-	else
-		return cx24116_read_snr_pct(fe, snr);
-}
-
-static int cx24116_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	struct cx24116_state *state = fe->demodulator_priv;
-
-	dprintk("%s()\n", __func__);
-
-	*ucblocks = (cx24116_readreg(state, CX24116_REG_UCB8) << 8) |
-		cx24116_readreg(state, CX24116_REG_UCB0);
-
-	return 0;
-}
-
-/* Overwrite the current tuning params, we are about to tune */
-static void cx24116_clone_params(struct dvb_frontend *fe)
-{
-	struct cx24116_state *state = fe->demodulator_priv;
-	memcpy(&state->dcur, &state->dnxt, sizeof(state->dcur));
-}
-
-/* Wait for LNB */
-static int cx24116_wait_for_lnb(struct dvb_frontend *fe)
-{
-	struct cx24116_state *state = fe->demodulator_priv;
-	int i;
-
-	dprintk("%s() qstatus = 0x%02x\n", __func__,
-		cx24116_readreg(state, CX24116_REG_QSTATUS));
-
-	/* Wait for up to 300 ms */
-	for (i = 0; i < 30 ; i++) {
-		if (cx24116_readreg(state, CX24116_REG_QSTATUS) & 0x20)
-			return 0;
-		msleep(10);
-	}
-
-	dprintk("%s(): LNB not ready\n", __func__);
-
-	return -ETIMEDOUT; /* -EBUSY ? */
-}
-
-static int cx24116_set_voltage(struct dvb_frontend *fe,
-	fe_sec_voltage_t voltage)
-{
-	struct cx24116_cmd cmd;
-	int ret;
-
-	dprintk("%s: %s\n", __func__,
-		voltage == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" :
-		voltage == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : "??");
-
-	/* Wait for LNB ready */
-	ret = cx24116_wait_for_lnb(fe);
-	if (ret != 0)
-		return ret;
-
-	/* Wait for voltage/min repeat delay */
-	msleep(100);
-
-	cmd.args[0x00] = CMD_LNBDCLEVEL;
-	cmd.args[0x01] = (voltage == SEC_VOLTAGE_18 ? 0x01 : 0x00);
-	cmd.len = 0x02;
-
-	/* Min delay time before DiSEqC send */
-	msleep(15);
-
-	return cx24116_cmd_execute(fe, &cmd);
-}
-
-static int cx24116_set_tone(struct dvb_frontend *fe,
-	fe_sec_tone_mode_t tone)
-{
-	struct cx24116_cmd cmd;
-	int ret;
-
-	dprintk("%s(%d)\n", __func__, tone);
-	if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) {
-		printk(KERN_ERR "%s: Invalid, tone=%d\n", __func__, tone);
-		return -EINVAL;
-	}
-
-	/* Wait for LNB ready */
-	ret = cx24116_wait_for_lnb(fe);
-	if (ret != 0)
-		return ret;
-
-	/* Min delay time after DiSEqC send */
-	msleep(15); /* XXX determine is FW does this, see send_diseqc/burst */
-
-	/* Now we set the tone */
-	cmd.args[0x00] = CMD_SET_TONE;
-	cmd.args[0x01] = 0x00;
-	cmd.args[0x02] = 0x00;
-
-	switch (tone) {
-	case SEC_TONE_ON:
-		dprintk("%s: setting tone on\n", __func__);
-		cmd.args[0x03] = 0x01;
-		break;
-	case SEC_TONE_OFF:
-		dprintk("%s: setting tone off\n", __func__);
-		cmd.args[0x03] = 0x00;
-		break;
-	}
-	cmd.len = 0x04;
-
-	/* Min delay time before DiSEqC send */
-	msleep(15); /* XXX determine is FW does this, see send_diseqc/burst */
-
-	return cx24116_cmd_execute(fe, &cmd);
-}
-
-/* Initialise DiSEqC */
-static int cx24116_diseqc_init(struct dvb_frontend *fe)
-{
-	struct cx24116_state *state = fe->demodulator_priv;
-	struct cx24116_cmd cmd;
-	int ret;
-
-	/* Firmware CMD 20: LNB/DiSEqC config */
-	cmd.args[0x00] = CMD_LNBCONFIG;
-	cmd.args[0x01] = 0x00;
-	cmd.args[0x02] = 0x10;
-	cmd.args[0x03] = 0x00;
-	cmd.args[0x04] = 0x8f;
-	cmd.args[0x05] = 0x28;
-	cmd.args[0x06] = (toneburst == CX24116_DISEQC_TONEOFF) ? 0x00 : 0x01;
-	cmd.args[0x07] = 0x01;
-	cmd.len = 0x08;
-	ret = cx24116_cmd_execute(fe, &cmd);
-	if (ret != 0)
-		return ret;
-
-	/* Prepare a DiSEqC command */
-	state->dsec_cmd.args[0x00] = CMD_LNBSEND;
-
-	/* DiSEqC burst */
-	state->dsec_cmd.args[CX24116_DISEQC_BURST]  = CX24116_DISEQC_MINI_A;
-
-	/* Unknown */
-	state->dsec_cmd.args[CX24116_DISEQC_ARG2_2] = 0x02;
-	state->dsec_cmd.args[CX24116_DISEQC_ARG3_0] = 0x00;
-	/* Continuation flag? */
-	state->dsec_cmd.args[CX24116_DISEQC_ARG4_0] = 0x00;
-
-	/* DiSEqC message length */
-	state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] = 0x00;
-
-	/* Command length */
-	state->dsec_cmd.len = CX24116_DISEQC_MSGOFS;
-
-	return 0;
-}
-
-/* Send DiSEqC message with derived burst (hack) || previous burst */
-static int cx24116_send_diseqc_msg(struct dvb_frontend *fe,
-	struct dvb_diseqc_master_cmd *d)
-{
-	struct cx24116_state *state = fe->demodulator_priv;
-	int i, ret;
-
-	/* Dump DiSEqC message */
-	if (debug) {
-		printk(KERN_INFO "cx24116: %s(", __func__);
-		for (i = 0 ; i < d->msg_len ;) {
-			printk(KERN_INFO "0x%02x", d->msg[i]);
-			if (++i < d->msg_len)
-				printk(KERN_INFO ", ");
-		}
-		printk(") toneburst=%d\n", toneburst);
-	}
-
-	/* Validate length */
-	if (d->msg_len > (CX24116_ARGLEN - CX24116_DISEQC_MSGOFS))
-		return -EINVAL;
-
-	/* DiSEqC message */
-	for (i = 0; i < d->msg_len; i++)
-		state->dsec_cmd.args[CX24116_DISEQC_MSGOFS + i] = d->msg[i];
-
-	/* DiSEqC message length */
-	state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] = d->msg_len;
-
-	/* Command length */
-	state->dsec_cmd.len = CX24116_DISEQC_MSGOFS +
-		state->dsec_cmd.args[CX24116_DISEQC_MSGLEN];
-
-	/* DiSEqC toneburst */
-	if (toneburst == CX24116_DISEQC_MESGCACHE)
-		/* Message is cached */
-		return 0;
-
-	else if (toneburst == CX24116_DISEQC_TONEOFF)
-		/* Message is sent without burst */
-		state->dsec_cmd.args[CX24116_DISEQC_BURST] = 0;
-
-	else if (toneburst == CX24116_DISEQC_TONECACHE) {
-		/*
-		 * Message is sent with derived else cached burst
-		 *
-		 * WRITE PORT GROUP COMMAND 38
-		 *
-		 * 0/A/A: E0 10 38 F0..F3
-		 * 1/B/B: E0 10 38 F4..F7
-		 * 2/C/A: E0 10 38 F8..FB
-		 * 3/D/B: E0 10 38 FC..FF
-		 *
-		 * databyte[3]= 8421:8421
-		 *              ABCD:WXYZ
-		 *              CLR :SET
-		 *
-		 *              WX= PORT SELECT 0..3    (X=TONEBURST)
-		 *              Y = VOLTAGE             (0=13V, 1=18V)
-		 *              Z = BAND                (0=LOW, 1=HIGH(22K))
-		 */
-		if (d->msg_len >= 4 && d->msg[2] == 0x38)
-			state->dsec_cmd.args[CX24116_DISEQC_BURST] =
-				((d->msg[3] & 4) >> 2);
-		if (debug)
-			dprintk("%s burst=%d\n", __func__,
-				state->dsec_cmd.args[CX24116_DISEQC_BURST]);
-	}
-
-	/* Wait for LNB ready */
-	ret = cx24116_wait_for_lnb(fe);
-	if (ret != 0)
-		return ret;
-
-	/* Wait for voltage/min repeat delay */
-	msleep(100);
-
-	/* Command */
-	ret = cx24116_cmd_execute(fe, &state->dsec_cmd);
-	if (ret != 0)
-		return ret;
-	/*
-	 * Wait for send
-	 *
-	 * Eutelsat spec:
-	 * >15ms delay          + (XXX determine if FW does this, see set_tone)
-	 *  13.5ms per byte     +
-	 * >15ms delay          +
-	 *  12.5ms burst        +
-	 * >15ms delay            (XXX determine if FW does this, see set_tone)
-	 */
-	msleep((state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) +
-		((toneburst == CX24116_DISEQC_TONEOFF) ? 30 : 60));
-
-	return 0;
-}
-
-/* Send DiSEqC burst */
-static int cx24116_diseqc_send_burst(struct dvb_frontend *fe,
-	fe_sec_mini_cmd_t burst)
-{
-	struct cx24116_state *state = fe->demodulator_priv;
-	int ret;
-
-	dprintk("%s(%d) toneburst=%d\n", __func__, burst, toneburst);
-
-	/* DiSEqC burst */
-	if (burst == SEC_MINI_A)
-		state->dsec_cmd.args[CX24116_DISEQC_BURST] =
-			CX24116_DISEQC_MINI_A;
-	else if (burst == SEC_MINI_B)
-		state->dsec_cmd.args[CX24116_DISEQC_BURST] =
-			CX24116_DISEQC_MINI_B;
-	else
-		return -EINVAL;
-
-	/* DiSEqC toneburst */
-	if (toneburst != CX24116_DISEQC_MESGCACHE)
-		/* Burst is cached */
-		return 0;
-
-	/* Burst is to be sent with cached message */
-
-	/* Wait for LNB ready */
-	ret = cx24116_wait_for_lnb(fe);
-	if (ret != 0)
-		return ret;
-
-	/* Wait for voltage/min repeat delay */
-	msleep(100);
-
-	/* Command */
-	ret = cx24116_cmd_execute(fe, &state->dsec_cmd);
-	if (ret != 0)
-		return ret;
-
-	/*
-	 * Wait for send
-	 *
-	 * Eutelsat spec:
-	 * >15ms delay          + (XXX determine if FW does this, see set_tone)
-	 *  13.5ms per byte     +
-	 * >15ms delay          +
-	 *  12.5ms burst        +
-	 * >15ms delay            (XXX determine if FW does this, see set_tone)
-	 */
-	msleep((state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + 60);
-
-	return 0;
-}
-
-static void cx24116_release(struct dvb_frontend *fe)
-{
-	struct cx24116_state *state = fe->demodulator_priv;
-	dprintk("%s\n", __func__);
-	kfree(state);
-}
-
-static struct dvb_frontend_ops cx24116_ops;
-
-struct dvb_frontend *cx24116_attach(const struct cx24116_config *config,
-	struct i2c_adapter *i2c)
-{
-	struct cx24116_state *state = NULL;
-	int ret;
-
-	dprintk("%s\n", __func__);
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct cx24116_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error1;
-
-	state->config = config;
-	state->i2c = i2c;
-
-	/* check if the demod is present */
-	ret = (cx24116_readreg(state, 0xFF) << 8) |
-		cx24116_readreg(state, 0xFE);
-	if (ret != 0x0501) {
-		printk(KERN_INFO "Invalid probe, probably not a CX24116 device\n");
-		goto error2;
-	}
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &cx24116_ops,
-		sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error2: kfree(state);
-error1: return NULL;
-}
-EXPORT_SYMBOL(cx24116_attach);
-
-/*
- * Initialise or wake up device
- *
- * Power config will reset and load initial firmware if required
- */
-static int cx24116_initfe(struct dvb_frontend *fe)
-{
-	struct cx24116_state *state = fe->demodulator_priv;
-	struct cx24116_cmd cmd;
-	int ret;
-
-	dprintk("%s()\n", __func__);
-
-	/* Power on */
-	cx24116_writereg(state, 0xe0, 0);
-	cx24116_writereg(state, 0xe1, 0);
-	cx24116_writereg(state, 0xea, 0);
-
-	/* Firmware CMD 36: Power config */
-	cmd.args[0x00] = CMD_TUNERSLEEP;
-	cmd.args[0x01] = 0;
-	cmd.len = 0x02;
-	ret = cx24116_cmd_execute(fe, &cmd);
-	if (ret != 0)
-		return ret;
-
-	ret = cx24116_diseqc_init(fe);
-	if (ret != 0)
-		return ret;
-
-	/* HVR-4000 needs this */
-	return cx24116_set_voltage(fe, SEC_VOLTAGE_13);
-}
-
-/*
- * Put device to sleep
- */
-static int cx24116_sleep(struct dvb_frontend *fe)
-{
-	struct cx24116_state *state = fe->demodulator_priv;
-	struct cx24116_cmd cmd;
-	int ret;
-
-	dprintk("%s()\n", __func__);
-
-	/* Firmware CMD 36: Power config */
-	cmd.args[0x00] = CMD_TUNERSLEEP;
-	cmd.args[0x01] = 1;
-	cmd.len = 0x02;
-	ret = cx24116_cmd_execute(fe, &cmd);
-	if (ret != 0)
-		return ret;
-
-	/* Power off (Shutdown clocks) */
-	cx24116_writereg(state, 0xea, 0xff);
-	cx24116_writereg(state, 0xe1, 1);
-	cx24116_writereg(state, 0xe0, 1);
-
-	return 0;
-}
-
-/* dvb-core told us to tune, the tv property cache will be complete,
- * it's safe for is to pull values and use them for tuning purposes.
- */
-static int cx24116_set_frontend(struct dvb_frontend *fe)
-{
-	struct cx24116_state *state = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct cx24116_cmd cmd;
-	fe_status_t tunerstat;
-	int i, status, ret, retune = 1;
-
-	dprintk("%s()\n", __func__);
-
-	switch (c->delivery_system) {
-	case SYS_DVBS:
-		dprintk("%s: DVB-S delivery system selected\n", __func__);
-
-		/* Only QPSK is supported for DVB-S */
-		if (c->modulation != QPSK) {
-			dprintk("%s: unsupported modulation selected (%d)\n",
-				__func__, c->modulation);
-			return -EOPNOTSUPP;
-		}
-
-		/* Pilot doesn't exist in DVB-S, turn bit off */
-		state->dnxt.pilot_val = CX24116_PILOT_OFF;
-
-		/* DVB-S only supports 0.35 */
-		if (c->rolloff != ROLLOFF_35) {
-			dprintk("%s: unsupported rolloff selected (%d)\n",
-				__func__, c->rolloff);
-			return -EOPNOTSUPP;
-		}
-		state->dnxt.rolloff_val = CX24116_ROLLOFF_035;
-		break;
-
-	case SYS_DVBS2:
-		dprintk("%s: DVB-S2 delivery system selected\n", __func__);
-
-		/*
-		 * NBC 8PSK/QPSK with DVB-S is supported for DVB-S2,
-		 * but not hardware auto detection
-		 */
-		if (c->modulation != PSK_8 && c->modulation != QPSK) {
-			dprintk("%s: unsupported modulation selected (%d)\n",
-				__func__, c->modulation);
-			return -EOPNOTSUPP;
-		}
-
-		switch (c->pilot) {
-		case PILOT_AUTO:	/* Not supported but emulated */
-			state->dnxt.pilot_val = (c->modulation == QPSK)
-				? CX24116_PILOT_OFF : CX24116_PILOT_ON;
-			retune++;
-			break;
-		case PILOT_OFF:
-			state->dnxt.pilot_val = CX24116_PILOT_OFF;
-			break;
-		case PILOT_ON:
-			state->dnxt.pilot_val = CX24116_PILOT_ON;
-			break;
-		default:
-			dprintk("%s: unsupported pilot mode selected (%d)\n",
-				__func__, c->pilot);
-			return -EOPNOTSUPP;
-		}
-
-		switch (c->rolloff) {
-		case ROLLOFF_20:
-			state->dnxt.rolloff_val = CX24116_ROLLOFF_020;
-			break;
-		case ROLLOFF_25:
-			state->dnxt.rolloff_val = CX24116_ROLLOFF_025;
-			break;
-		case ROLLOFF_35:
-			state->dnxt.rolloff_val = CX24116_ROLLOFF_035;
-			break;
-		case ROLLOFF_AUTO:	/* Rolloff must be explicit */
-		default:
-			dprintk("%s: unsupported rolloff selected (%d)\n",
-				__func__, c->rolloff);
-			return -EOPNOTSUPP;
-		}
-		break;
-
-	default:
-		dprintk("%s: unsupported delivery system selected (%d)\n",
-			__func__, c->delivery_system);
-		return -EOPNOTSUPP;
-	}
-	state->dnxt.delsys = c->delivery_system;
-	state->dnxt.modulation = c->modulation;
-	state->dnxt.frequency = c->frequency;
-	state->dnxt.pilot = c->pilot;
-	state->dnxt.rolloff = c->rolloff;
-
-	ret = cx24116_set_inversion(state, c->inversion);
-	if (ret !=  0)
-		return ret;
-
-	/* FEC_NONE/AUTO for DVB-S2 is not supported and detected here */
-	ret = cx24116_set_fec(state, c->delivery_system, c->modulation, c->fec_inner);
-	if (ret !=  0)
-		return ret;
-
-	ret = cx24116_set_symbolrate(state, c->symbol_rate);
-	if (ret !=  0)
-		return ret;
-
-	/* discard the 'current' tuning parameters and prepare to tune */
-	cx24116_clone_params(fe);
-
-	dprintk("%s:   delsys      = %d\n", __func__, state->dcur.delsys);
-	dprintk("%s:   modulation  = %d\n", __func__, state->dcur.modulation);
-	dprintk("%s:   frequency   = %d\n", __func__, state->dcur.frequency);
-	dprintk("%s:   pilot       = %d (val = 0x%02x)\n", __func__,
-		state->dcur.pilot, state->dcur.pilot_val);
-	dprintk("%s:   retune      = %d\n", __func__, retune);
-	dprintk("%s:   rolloff     = %d (val = 0x%02x)\n", __func__,
-		state->dcur.rolloff, state->dcur.rolloff_val);
-	dprintk("%s:   symbol_rate = %d\n", __func__, state->dcur.symbol_rate);
-	dprintk("%s:   FEC         = %d (mask/val = 0x%02x/0x%02x)\n", __func__,
-		state->dcur.fec, state->dcur.fec_mask, state->dcur.fec_val);
-	dprintk("%s:   Inversion   = %d (val = 0x%02x)\n", __func__,
-		state->dcur.inversion, state->dcur.inversion_val);
-
-	/* This is also done in advise/acquire on HVR4000 but not on LITE */
-	if (state->config->set_ts_params)
-		state->config->set_ts_params(fe, 0);
-
-	/* Set/Reset B/W */
-	cmd.args[0x00] = CMD_BANDWIDTH;
-	cmd.args[0x01] = 0x01;
-	cmd.len = 0x02;
-	ret = cx24116_cmd_execute(fe, &cmd);
-	if (ret != 0)
-		return ret;
-
-	/* Prepare a tune request */
-	cmd.args[0x00] = CMD_TUNEREQUEST;
-
-	/* Frequency */
-	cmd.args[0x01] = (state->dcur.frequency & 0xff0000) >> 16;
-	cmd.args[0x02] = (state->dcur.frequency & 0x00ff00) >> 8;
-	cmd.args[0x03] = (state->dcur.frequency & 0x0000ff);
-
-	/* Symbol Rate */
-	cmd.args[0x04] = ((state->dcur.symbol_rate / 1000) & 0xff00) >> 8;
-	cmd.args[0x05] = ((state->dcur.symbol_rate / 1000) & 0x00ff);
-
-	/* Automatic Inversion */
-	cmd.args[0x06] = state->dcur.inversion_val;
-
-	/* Modulation / FEC / Pilot */
-	cmd.args[0x07] = state->dcur.fec_val | state->dcur.pilot_val;
-
-	cmd.args[0x08] = CX24116_SEARCH_RANGE_KHZ >> 8;
-	cmd.args[0x09] = CX24116_SEARCH_RANGE_KHZ & 0xff;
-	cmd.args[0x0a] = 0x00;
-	cmd.args[0x0b] = 0x00;
-	cmd.args[0x0c] = state->dcur.rolloff_val;
-	cmd.args[0x0d] = state->dcur.fec_mask;
-
-	if (state->dcur.symbol_rate > 30000000) {
-		cmd.args[0x0e] = 0x04;
-		cmd.args[0x0f] = 0x00;
-		cmd.args[0x10] = 0x01;
-		cmd.args[0x11] = 0x77;
-		cmd.args[0x12] = 0x36;
-		cx24116_writereg(state, CX24116_REG_CLKDIV, 0x44);
-		cx24116_writereg(state, CX24116_REG_RATEDIV, 0x01);
-	} else {
-		cmd.args[0x0e] = 0x06;
-		cmd.args[0x0f] = 0x00;
-		cmd.args[0x10] = 0x00;
-		cmd.args[0x11] = 0xFA;
-		cmd.args[0x12] = 0x24;
-		cx24116_writereg(state, CX24116_REG_CLKDIV, 0x46);
-		cx24116_writereg(state, CX24116_REG_RATEDIV, 0x00);
-	}
-
-	cmd.len = 0x13;
-
-	/* We need to support pilot and non-pilot tuning in the
-	 * driver automatically. This is a workaround for because
-	 * the demod does not support autodetect.
-	 */
-	do {
-		/* Reset status register */
-		status = cx24116_readreg(state, CX24116_REG_SSTATUS)
-			& CX24116_SIGNAL_MASK;
-		cx24116_writereg(state, CX24116_REG_SSTATUS, status);
-
-		/* Tune */
-		ret = cx24116_cmd_execute(fe, &cmd);
-		if (ret != 0)
-			break;
-
-		/*
-		 * Wait for up to 500 ms before retrying
-		 *
-		 * If we are able to tune then generally it occurs within 100ms.
-		 * If it takes longer, try a different toneburst setting.
-		 */
-		for (i = 0; i < 50 ; i++) {
-			cx24116_read_status(fe, &tunerstat);
-			status = tunerstat & (FE_HAS_SIGNAL | FE_HAS_SYNC);
-			if (status == (FE_HAS_SIGNAL | FE_HAS_SYNC)) {
-				dprintk("%s: Tuned\n", __func__);
-				goto tuned;
-			}
-			msleep(10);
-		}
-
-		dprintk("%s: Not tuned\n", __func__);
-
-		/* Toggle pilot bit when in auto-pilot */
-		if (state->dcur.pilot == PILOT_AUTO)
-			cmd.args[0x07] ^= CX24116_PILOT_ON;
-	} while (--retune);
-
-tuned:  /* Set/Reset B/W */
-	cmd.args[0x00] = CMD_BANDWIDTH;
-	cmd.args[0x01] = 0x00;
-	cmd.len = 0x02;
-	return cx24116_cmd_execute(fe, &cmd);
-}
-
-static int cx24116_tune(struct dvb_frontend *fe, bool re_tune,
-	unsigned int mode_flags, unsigned int *delay, fe_status_t *status)
-{
-	/*
-	 * It is safe to discard "params" here, as the DVB core will sync
-	 * fe->dtv_property_cache with fepriv->parameters_in, where the
-	 * DVBv3 params are stored. The only practical usage for it indicate
-	 * that re-tuning is needed, e. g. (fepriv->state & FESTATE_RETUNE) is
-	 * true.
-	 */
-
-	*delay = HZ / 5;
-	if (re_tune) {
-		int ret = cx24116_set_frontend(fe);
-		if (ret)
-			return ret;
-	}
-	return cx24116_read_status(fe, status);
-}
-
-static int cx24116_get_algo(struct dvb_frontend *fe)
-{
-	return DVBFE_ALGO_HW;
-}
-
-static struct dvb_frontend_ops cx24116_ops = {
-	.delsys = { SYS_DVBS, SYS_DVBS2 },
-	.info = {
-		.name = "Conexant CX24116/CX24118",
-		.frequency_min = 950000,
-		.frequency_max = 2150000,
-		.frequency_stepsize = 1011, /* kHz for QPSK frontends */
-		.frequency_tolerance = 5000,
-		.symbol_rate_min = 1000000,
-		.symbol_rate_max = 45000000,
-		.caps = FE_CAN_INVERSION_AUTO |
-			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
-			FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_2G_MODULATION |
-			FE_CAN_QPSK | FE_CAN_RECOVER
-	},
-
-	.release = cx24116_release,
-
-	.init = cx24116_initfe,
-	.sleep = cx24116_sleep,
-	.read_status = cx24116_read_status,
-	.read_ber = cx24116_read_ber,
-	.read_signal_strength = cx24116_read_signal_strength,
-	.read_snr = cx24116_read_snr,
-	.read_ucblocks = cx24116_read_ucblocks,
-	.set_tone = cx24116_set_tone,
-	.set_voltage = cx24116_set_voltage,
-	.diseqc_send_master_cmd = cx24116_send_diseqc_msg,
-	.diseqc_send_burst = cx24116_diseqc_send_burst,
-	.get_frontend_algo = cx24116_get_algo,
-	.tune = cx24116_tune,
-
-	.set_frontend = cx24116_set_frontend,
-};
-
-MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24116/cx24118 hardware");
-MODULE_AUTHOR("Steven Toth");
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/media/dvb/frontends/cx24116.h b/drivers/media/dvb/frontends/cx24116.h
deleted file mode 100644
index 7d90ab9..0000000
--- a/drivers/media/dvb/frontends/cx24116.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
-    Conexant cx24116/cx24118 - DVBS/S2 Satellite demod/tuner driver
-
-    Copyright (C) 2006 Steven Toth <stoth@linuxtv.com>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef CX24116_H
-#define CX24116_H
-
-#include <linux/dvb/frontend.h>
-
-struct cx24116_config {
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* Need to set device param for start_dma */
-	int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured);
-
-	/* Need to reset device during firmware loading */
-	int (*reset_device)(struct dvb_frontend *fe);
-
-	/* Need to set MPEG parameters */
-	u8 mpg_clk_pos_pol:0x02;
-
-	/* max bytes I2C provider can write at once */
-	u16 i2c_wr_max;
-};
-
-#if defined(CONFIG_DVB_CX24116) || \
-	(defined(CONFIG_DVB_CX24116_MODULE) && defined(MODULE))
-extern struct dvb_frontend *cx24116_attach(
-	const struct cx24116_config *config,
-	struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *cx24116_attach(
-	const struct cx24116_config *config,
-	struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif /* CX24116_H */
diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c
deleted file mode 100644
index 7e28b4e..0000000
--- a/drivers/media/dvb/frontends/cx24123.c
+++ /dev/null
@@ -1,1165 +0,0 @@
-/*
- *   Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver
- *
- *   Copyright (C) 2005 Steven Toth <stoth@linuxtv.org>
- *
- *   Support for KWorld DVB-S 100 by Vadim Catana <skystar@moldova.cc>
- *
- *   Support for CX24123/CX24113-NIM by Patrick Boettcher <pb@linuxtv.org>
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License as
- *   published by the Free Software Foundation; either version 2 of
- *   the License, or (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *   General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include "dvb_frontend.h"
-#include "cx24123.h"
-
-#define XTAL 10111000
-
-static int force_band;
-module_param(force_band, int, 0644);
-MODULE_PARM_DESC(force_band, "Force a specific band select "\
-	"(1-9, default:off).");
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
-
-#define info(args...) do { printk(KERN_INFO "CX24123: " args); } while (0)
-#define err(args...)  do { printk(KERN_ERR  "CX24123: " args); } while (0)
-
-#define dprintk(args...) \
-	do { \
-		if (debug) { \
-			printk(KERN_DEBUG "CX24123: %s: ", __func__); \
-			printk(args); \
-		} \
-	} while (0)
-
-struct cx24123_state {
-	struct i2c_adapter *i2c;
-	const struct cx24123_config *config;
-
-	struct dvb_frontend frontend;
-
-	/* Some PLL specifics for tuning */
-	u32 VCAarg;
-	u32 VGAarg;
-	u32 bandselectarg;
-	u32 pllarg;
-	u32 FILTune;
-
-	struct i2c_adapter tuner_i2c_adapter;
-
-	u8 demod_rev;
-
-	/* The Demod/Tuner can't easily provide these, we cache them */
-	u32 currentfreq;
-	u32 currentsymbolrate;
-};
-
-/* Various tuner defaults need to be established for a given symbol rate Sps */
-static struct cx24123_AGC_val {
-	u32 symbolrate_low;
-	u32 symbolrate_high;
-	u32 VCAprogdata;
-	u32 VGAprogdata;
-	u32 FILTune;
-} cx24123_AGC_vals[] =
-{
-	{
-		.symbolrate_low		= 1000000,
-		.symbolrate_high	= 4999999,
-		/* the specs recommend other values for VGA offsets,
-		   but tests show they are wrong */
-		.VGAprogdata		= (1 << 19) | (0x180 << 9) | 0x1e0,
-		.VCAprogdata		= (2 << 19) | (0x07 << 9) | 0x07,
-		.FILTune		= 0x27f /* 0.41 V */
-	},
-	{
-		.symbolrate_low		=  5000000,
-		.symbolrate_high	= 14999999,
-		.VGAprogdata		= (1 << 19) | (0x180 << 9) | 0x1e0,
-		.VCAprogdata		= (2 << 19) | (0x07 << 9) | 0x1f,
-		.FILTune		= 0x317 /* 0.90 V */
-	},
-	{
-		.symbolrate_low		= 15000000,
-		.symbolrate_high	= 45000000,
-		.VGAprogdata		= (1 << 19) | (0x100 << 9) | 0x180,
-		.VCAprogdata		= (2 << 19) | (0x07 << 9) | 0x3f,
-		.FILTune		= 0x145 /* 2.70 V */
-	},
-};
-
-/*
- * Various tuner defaults need to be established for a given frequency kHz.
- * fixme: The bounds on the bands do not match the doc in real life.
- * fixme: Some of them have been moved, other might need adjustment.
- */
-static struct cx24123_bandselect_val {
-	u32 freq_low;
-	u32 freq_high;
-	u32 VCOdivider;
-	u32 progdata;
-} cx24123_bandselect_vals[] =
-{
-	/* band 1 */
-	{
-		.freq_low	= 950000,
-		.freq_high	= 1074999,
-		.VCOdivider	= 4,
-		.progdata	= (0 << 19) | (0 << 9) | 0x40,
-	},
-
-	/* band 2 */
-	{
-		.freq_low	= 1075000,
-		.freq_high	= 1177999,
-		.VCOdivider	= 4,
-		.progdata	= (0 << 19) | (0 << 9) | 0x80,
-	},
-
-	/* band 3 */
-	{
-		.freq_low	= 1178000,
-		.freq_high	= 1295999,
-		.VCOdivider	= 2,
-		.progdata	= (0 << 19) | (1 << 9) | 0x01,
-	},
-
-	/* band 4 */
-	{
-		.freq_low	= 1296000,
-		.freq_high	= 1431999,
-		.VCOdivider	= 2,
-		.progdata	= (0 << 19) | (1 << 9) | 0x02,
-	},
-
-	/* band 5 */
-	{
-		.freq_low	= 1432000,
-		.freq_high	= 1575999,
-		.VCOdivider	= 2,
-		.progdata	= (0 << 19) | (1 << 9) | 0x04,
-	},
-
-	/* band 6 */
-	{
-		.freq_low	= 1576000,
-		.freq_high	= 1717999,
-		.VCOdivider	= 2,
-		.progdata	= (0 << 19) | (1 << 9) | 0x08,
-	},
-
-	/* band 7 */
-	{
-		.freq_low	= 1718000,
-		.freq_high	= 1855999,
-		.VCOdivider	= 2,
-		.progdata	= (0 << 19) | (1 << 9) | 0x10,
-	},
-
-	/* band 8 */
-	{
-		.freq_low	= 1856000,
-		.freq_high	= 2035999,
-		.VCOdivider	= 2,
-		.progdata	= (0 << 19) | (1 << 9) | 0x20,
-	},
-
-	/* band 9 */
-	{
-		.freq_low	= 2036000,
-		.freq_high	= 2150000,
-		.VCOdivider	= 2,
-		.progdata	= (0 << 19) | (1 << 9) | 0x40,
-	},
-};
-
-static struct {
-	u8 reg;
-	u8 data;
-} cx24123_regdata[] =
-{
-	{0x00, 0x03}, /* Reset system */
-	{0x00, 0x00}, /* Clear reset */
-	{0x03, 0x07}, /* QPSK, DVB, Auto Acquisition (default) */
-	{0x04, 0x10}, /* MPEG */
-	{0x05, 0x04}, /* MPEG */
-	{0x06, 0x31}, /* MPEG (default) */
-	{0x0b, 0x00}, /* Freq search start point (default) */
-	{0x0c, 0x00}, /* Demodulator sample gain (default) */
-	{0x0d, 0x7f}, /* Force driver to shift until the maximum (+-10 MHz) */
-	{0x0e, 0x03}, /* Default non-inverted, FEC 3/4 (default) */
-	{0x0f, 0xfe}, /* FEC search mask (all supported codes) */
-	{0x10, 0x01}, /* Default search inversion, no repeat (default) */
-	{0x16, 0x00}, /* Enable reading of frequency */
-	{0x17, 0x01}, /* Enable EsNO Ready Counter */
-	{0x1c, 0x80}, /* Enable error counter */
-	{0x20, 0x00}, /* Tuner burst clock rate = 500KHz */
-	{0x21, 0x15}, /* Tuner burst mode, word length = 0x15 */
-	{0x28, 0x00}, /* Enable FILTERV with positive pol., DiSEqC 2.x off */
-	{0x29, 0x00}, /* DiSEqC LNB_DC off */
-	{0x2a, 0xb0}, /* DiSEqC Parameters (default) */
-	{0x2b, 0x73}, /* DiSEqC Tone Frequency (default) */
-	{0x2c, 0x00}, /* DiSEqC Message (0x2c - 0x31) */
-	{0x2d, 0x00},
-	{0x2e, 0x00},
-	{0x2f, 0x00},
-	{0x30, 0x00},
-	{0x31, 0x00},
-	{0x32, 0x8c}, /* DiSEqC Parameters (default) */
-	{0x33, 0x00}, /* Interrupts off (0x33 - 0x34) */
-	{0x34, 0x00},
-	{0x35, 0x03}, /* DiSEqC Tone Amplitude (default) */
-	{0x36, 0x02}, /* DiSEqC Parameters (default) */
-	{0x37, 0x3a}, /* DiSEqC Parameters (default) */
-	{0x3a, 0x00}, /* Enable AGC accumulator (for signal strength) */
-	{0x44, 0x00}, /* Constellation (default) */
-	{0x45, 0x00}, /* Symbol count (default) */
-	{0x46, 0x0d}, /* Symbol rate estimator on (default) */
-	{0x56, 0xc1}, /* Error Counter = Viterbi BER */
-	{0x57, 0xff}, /* Error Counter Window (default) */
-	{0x5c, 0x20}, /* Acquisition AFC Expiration window (default is 0x10) */
-	{0x67, 0x83}, /* Non-DCII symbol clock */
-};
-
-static int cx24123_i2c_writereg(struct cx24123_state *state,
-	u8 i2c_addr, int reg, int data)
-{
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg = {
-		.addr = i2c_addr, .flags = 0, .buf = buf, .len = 2
-	};
-	int err;
-
-	/* printk(KERN_DEBUG "wr(%02x): %02x %02x\n", i2c_addr, reg, data); */
-
-	err = i2c_transfer(state->i2c, &msg, 1);
-	if (err != 1) {
-		printk("%s: writereg error(err == %i, reg == 0x%02x,"
-			 " data == 0x%02x)\n", __func__, err, reg, data);
-		return err;
-	}
-
-	return 0;
-}
-
-static int cx24123_i2c_readreg(struct cx24123_state *state, u8 i2c_addr, u8 reg)
-{
-	int ret;
-	u8 b = 0;
-	struct i2c_msg msg[] = {
-		{ .addr = i2c_addr, .flags = 0, .buf = &reg, .len = 1 },
-		{ .addr = i2c_addr, .flags = I2C_M_RD, .buf = &b, .len = 1 }
-	};
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2) {
-		err("%s: reg=0x%x (error=%d)\n", __func__, reg, ret);
-		return ret;
-	}
-
-	/* printk(KERN_DEBUG "rd(%02x): %02x %02x\n", i2c_addr, reg, b); */
-
-	return b;
-}
-
-#define cx24123_readreg(state, reg) \
-	cx24123_i2c_readreg(state, state->config->demod_address, reg)
-#define cx24123_writereg(state, reg, val) \
-	cx24123_i2c_writereg(state, state->config->demod_address, reg, val)
-
-static int cx24123_set_inversion(struct cx24123_state *state,
-	fe_spectral_inversion_t inversion)
-{
-	u8 nom_reg = cx24123_readreg(state, 0x0e);
-	u8 auto_reg = cx24123_readreg(state, 0x10);
-
-	switch (inversion) {
-	case INVERSION_OFF:
-		dprintk("inversion off\n");
-		cx24123_writereg(state, 0x0e, nom_reg & ~0x80);
-		cx24123_writereg(state, 0x10, auto_reg | 0x80);
-		break;
-	case INVERSION_ON:
-		dprintk("inversion on\n");
-		cx24123_writereg(state, 0x0e, nom_reg | 0x80);
-		cx24123_writereg(state, 0x10, auto_reg | 0x80);
-		break;
-	case INVERSION_AUTO:
-		dprintk("inversion auto\n");
-		cx24123_writereg(state, 0x10, auto_reg & ~0x80);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int cx24123_get_inversion(struct cx24123_state *state,
-	fe_spectral_inversion_t *inversion)
-{
-	u8 val;
-
-	val = cx24123_readreg(state, 0x1b) >> 7;
-
-	if (val == 0) {
-		dprintk("read inversion off\n");
-		*inversion = INVERSION_OFF;
-	} else {
-		dprintk("read inversion on\n");
-		*inversion = INVERSION_ON;
-	}
-
-	return 0;
-}
-
-static int cx24123_set_fec(struct cx24123_state *state, fe_code_rate_t fec)
-{
-	u8 nom_reg = cx24123_readreg(state, 0x0e) & ~0x07;
-
-	if ((fec < FEC_NONE) || (fec > FEC_AUTO))
-		fec = FEC_AUTO;
-
-	/* Set the soft decision threshold */
-	if (fec == FEC_1_2)
-		cx24123_writereg(state, 0x43,
-			cx24123_readreg(state, 0x43) | 0x01);
-	else
-		cx24123_writereg(state, 0x43,
-			cx24123_readreg(state, 0x43) & ~0x01);
-
-	switch (fec) {
-	case FEC_1_2:
-		dprintk("set FEC to 1/2\n");
-		cx24123_writereg(state, 0x0e, nom_reg | 0x01);
-		cx24123_writereg(state, 0x0f, 0x02);
-		break;
-	case FEC_2_3:
-		dprintk("set FEC to 2/3\n");
-		cx24123_writereg(state, 0x0e, nom_reg | 0x02);
-		cx24123_writereg(state, 0x0f, 0x04);
-		break;
-	case FEC_3_4:
-		dprintk("set FEC to 3/4\n");
-		cx24123_writereg(state, 0x0e, nom_reg | 0x03);
-		cx24123_writereg(state, 0x0f, 0x08);
-		break;
-	case FEC_4_5:
-		dprintk("set FEC to 4/5\n");
-		cx24123_writereg(state, 0x0e, nom_reg | 0x04);
-		cx24123_writereg(state, 0x0f, 0x10);
-		break;
-	case FEC_5_6:
-		dprintk("set FEC to 5/6\n");
-		cx24123_writereg(state, 0x0e, nom_reg | 0x05);
-		cx24123_writereg(state, 0x0f, 0x20);
-		break;
-	case FEC_6_7:
-		dprintk("set FEC to 6/7\n");
-		cx24123_writereg(state, 0x0e, nom_reg | 0x06);
-		cx24123_writereg(state, 0x0f, 0x40);
-		break;
-	case FEC_7_8:
-		dprintk("set FEC to 7/8\n");
-		cx24123_writereg(state, 0x0e, nom_reg | 0x07);
-		cx24123_writereg(state, 0x0f, 0x80);
-		break;
-	case FEC_AUTO:
-		dprintk("set FEC to auto\n");
-		cx24123_writereg(state, 0x0f, 0xfe);
-		break;
-	default:
-		return -EOPNOTSUPP;
-	}
-
-	return 0;
-}
-
-static int cx24123_get_fec(struct cx24123_state *state, fe_code_rate_t *fec)
-{
-	int ret;
-
-	ret = cx24123_readreg(state, 0x1b);
-	if (ret < 0)
-		return ret;
-	ret = ret & 0x07;
-
-	switch (ret) {
-	case 1:
-		*fec = FEC_1_2;
-		break;
-	case 2:
-		*fec = FEC_2_3;
-		break;
-	case 3:
-		*fec = FEC_3_4;
-		break;
-	case 4:
-		*fec = FEC_4_5;
-		break;
-	case 5:
-		*fec = FEC_5_6;
-		break;
-	case 6:
-		*fec = FEC_6_7;
-		break;
-	case 7:
-		*fec = FEC_7_8;
-		break;
-	default:
-		/* this can happen when there's no lock */
-		*fec = FEC_NONE;
-	}
-
-	return 0;
-}
-
-/* Approximation of closest integer of log2(a/b). It actually gives the
-   lowest integer i such that 2^i >= round(a/b) */
-static u32 cx24123_int_log2(u32 a, u32 b)
-{
-	u32 exp, nearest = 0;
-	u32 div = a / b;
-	if (a % b >= b / 2)
-		++div;
-	if (div < (1 << 31)) {
-		for (exp = 1; div > exp; nearest++)
-			exp += exp;
-	}
-	return nearest;
-}
-
-static int cx24123_set_symbolrate(struct cx24123_state *state, u32 srate)
-{
-	u32 tmp, sample_rate, ratio, sample_gain;
-	u8 pll_mult;
-
-	/*  check if symbol rate is within limits */
-	if ((srate > state->frontend.ops.info.symbol_rate_max) ||
-	    (srate < state->frontend.ops.info.symbol_rate_min))
-		return -EOPNOTSUPP;
-
-	/* choose the sampling rate high enough for the required operation,
-	   while optimizing the power consumed by the demodulator */
-	if (srate < (XTAL*2)/2)
-		pll_mult = 2;
-	else if (srate < (XTAL*3)/2)
-		pll_mult = 3;
-	else if (srate < (XTAL*4)/2)
-		pll_mult = 4;
-	else if (srate < (XTAL*5)/2)
-		pll_mult = 5;
-	else if (srate < (XTAL*6)/2)
-		pll_mult = 6;
-	else if (srate < (XTAL*7)/2)
-		pll_mult = 7;
-	else if (srate < (XTAL*8)/2)
-		pll_mult = 8;
-	else
-		pll_mult = 9;
-
-
-	sample_rate = pll_mult * XTAL;
-
-	/*
-	    SYSSymbolRate[21:0] = (srate << 23) / sample_rate
-
-	    We have to use 32 bit unsigned arithmetic without precision loss.
-	    The maximum srate is 45000000 or 0x02AEA540. This number has
-	    only 6 clear bits on top, hence we can shift it left only 6 bits
-	    at a time. Borrowed from cx24110.c
-	*/
-
-	tmp = srate << 6;
-	ratio = tmp / sample_rate;
-
-	tmp = (tmp % sample_rate) << 6;
-	ratio = (ratio << 6) + (tmp / sample_rate);
-
-	tmp = (tmp % sample_rate) << 6;
-	ratio = (ratio << 6) + (tmp / sample_rate);
-
-	tmp = (tmp % sample_rate) << 5;
-	ratio = (ratio << 5) + (tmp / sample_rate);
-
-
-	cx24123_writereg(state, 0x01, pll_mult * 6);
-
-	cx24123_writereg(state, 0x08, (ratio >> 16) & 0x3f);
-	cx24123_writereg(state, 0x09, (ratio >> 8) & 0xff);
-	cx24123_writereg(state, 0x0a, ratio & 0xff);
-
-	/* also set the demodulator sample gain */
-	sample_gain = cx24123_int_log2(sample_rate, srate);
-	tmp = cx24123_readreg(state, 0x0c) & ~0xe0;
-	cx24123_writereg(state, 0x0c, tmp | sample_gain << 5);
-
-	dprintk("srate=%d, ratio=0x%08x, sample_rate=%i sample_gain=%d\n",
-		srate, ratio, sample_rate, sample_gain);
-
-	return 0;
-}
-
-/*
- * Based on the required frequency and symbolrate, the tuner AGC has
- * to be configured and the correct band selected.
- * Calculate those values.
- */
-static int cx24123_pll_calculate(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct cx24123_state *state = fe->demodulator_priv;
-	u32 ndiv = 0, adiv = 0, vco_div = 0;
-	int i = 0;
-	int pump = 2;
-	int band = 0;
-	int num_bands = ARRAY_SIZE(cx24123_bandselect_vals);
-	struct cx24123_bandselect_val *bsv = NULL;
-	struct cx24123_AGC_val *agcv = NULL;
-
-	/* Defaults for low freq, low rate */
-	state->VCAarg = cx24123_AGC_vals[0].VCAprogdata;
-	state->VGAarg = cx24123_AGC_vals[0].VGAprogdata;
-	state->bandselectarg = cx24123_bandselect_vals[0].progdata;
-	vco_div = cx24123_bandselect_vals[0].VCOdivider;
-
-	/* For the given symbol rate, determine the VCA, VGA and
-	 * FILTUNE programming bits */
-	for (i = 0; i < ARRAY_SIZE(cx24123_AGC_vals); i++) {
-		agcv = &cx24123_AGC_vals[i];
-		if ((agcv->symbolrate_low <= p->symbol_rate) &&
-		    (agcv->symbolrate_high >= p->symbol_rate)) {
-			state->VCAarg = agcv->VCAprogdata;
-			state->VGAarg = agcv->VGAprogdata;
-			state->FILTune = agcv->FILTune;
-		}
-	}
-
-	/* determine the band to use */
-	if (force_band < 1 || force_band > num_bands) {
-		for (i = 0; i < num_bands; i++) {
-			bsv = &cx24123_bandselect_vals[i];
-			if ((bsv->freq_low <= p->frequency) &&
-				(bsv->freq_high >= p->frequency))
-				band = i;
-		}
-	} else
-		band = force_band - 1;
-
-	state->bandselectarg = cx24123_bandselect_vals[band].progdata;
-	vco_div = cx24123_bandselect_vals[band].VCOdivider;
-
-	/* determine the charge pump current */
-	if (p->frequency < (cx24123_bandselect_vals[band].freq_low +
-		cx24123_bandselect_vals[band].freq_high) / 2)
-		pump = 0x01;
-	else
-		pump = 0x02;
-
-	/* Determine the N/A dividers for the requested lband freq (in kHz). */
-	/* Note: the reference divider R=10, frequency is in KHz,
-	 * XTAL is in Hz */
-	ndiv = (((p->frequency * vco_div * 10) /
-		(2 * XTAL / 1000)) / 32) & 0x1ff;
-	adiv = (((p->frequency * vco_div * 10) /
-		(2 * XTAL / 1000)) % 32) & 0x1f;
-
-	if (adiv == 0 && ndiv > 0)
-		ndiv--;
-
-	/* control bits 11, refdiv 11, charge pump polarity 1,
-	 * charge pump current, ndiv, adiv */
-	state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) |
-		(pump << 14) | (ndiv << 5) | adiv;
-
-	return 0;
-}
-
-/*
- * Tuner data is 21 bits long, must be left-aligned in data.
- * Tuner cx24109 is written through a dedicated 3wire interface
- * on the demod chip.
- */
-static int cx24123_pll_writereg(struct dvb_frontend *fe, u32 data)
-{
-	struct cx24123_state *state = fe->demodulator_priv;
-	unsigned long timeout;
-
-	dprintk("pll writereg called, data=0x%08x\n", data);
-
-	/* align the 21 bytes into to bit23 boundary */
-	data = data << 3;
-
-	/* Reset the demod pll word length to 0x15 bits */
-	cx24123_writereg(state, 0x21, 0x15);
-
-	/* write the msb 8 bits, wait for the send to be completed */
-	timeout = jiffies + msecs_to_jiffies(40);
-	cx24123_writereg(state, 0x22, (data >> 16) & 0xff);
-	while ((cx24123_readreg(state, 0x20) & 0x40) == 0) {
-		if (time_after(jiffies, timeout)) {
-			err("%s:  demodulator is not responding, "\
-				"possibly hung, aborting.\n", __func__);
-			return -EREMOTEIO;
-		}
-		msleep(10);
-	}
-
-	/* send another 8 bytes, wait for the send to be completed */
-	timeout = jiffies + msecs_to_jiffies(40);
-	cx24123_writereg(state, 0x22, (data >> 8) & 0xff);
-	while ((cx24123_readreg(state, 0x20) & 0x40) == 0) {
-		if (time_after(jiffies, timeout)) {
-			err("%s:  demodulator is not responding, "\
-				"possibly hung, aborting.\n", __func__);
-			return -EREMOTEIO;
-		}
-		msleep(10);
-	}
-
-	/* send the lower 5 bits of this byte, padded with 3 LBB,
-	 * wait for the send to be completed */
-	timeout = jiffies + msecs_to_jiffies(40);
-	cx24123_writereg(state, 0x22, (data) & 0xff);
-	while ((cx24123_readreg(state, 0x20) & 0x80)) {
-		if (time_after(jiffies, timeout)) {
-			err("%s:  demodulator is not responding," \
-				"possibly hung, aborting.\n", __func__);
-			return -EREMOTEIO;
-		}
-		msleep(10);
-	}
-
-	/* Trigger the demod to configure the tuner */
-	cx24123_writereg(state, 0x20, cx24123_readreg(state, 0x20) | 2);
-	cx24123_writereg(state, 0x20, cx24123_readreg(state, 0x20) & 0xfd);
-
-	return 0;
-}
-
-static int cx24123_pll_tune(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct cx24123_state *state = fe->demodulator_priv;
-	u8 val;
-
-	dprintk("frequency=%i\n", p->frequency);
-
-	if (cx24123_pll_calculate(fe) != 0) {
-		err("%s: cx24123_pll_calcutate failed\n", __func__);
-		return -EINVAL;
-	}
-
-	/* Write the new VCO/VGA */
-	cx24123_pll_writereg(fe, state->VCAarg);
-	cx24123_pll_writereg(fe, state->VGAarg);
-
-	/* Write the new bandselect and pll args */
-	cx24123_pll_writereg(fe, state->bandselectarg);
-	cx24123_pll_writereg(fe, state->pllarg);
-
-	/* set the FILTUNE voltage */
-	val = cx24123_readreg(state, 0x28) & ~0x3;
-	cx24123_writereg(state, 0x27, state->FILTune >> 2);
-	cx24123_writereg(state, 0x28, val | (state->FILTune & 0x3));
-
-	dprintk("pll tune VCA=%d, band=%d, pll=%d\n", state->VCAarg,
-			state->bandselectarg, state->pllarg);
-
-	return 0;
-}
-
-
-/*
- * 0x23:
- *    [7:7] = BTI enabled
- *    [6:6] = I2C repeater enabled
- *    [5:5] = I2C repeater start
- *    [0:0] = BTI start
- */
-
-/* mode == 1 -> i2c-repeater, 0 -> bti */
-static int cx24123_repeater_mode(struct cx24123_state *state, u8 mode, u8 start)
-{
-	u8 r = cx24123_readreg(state, 0x23) & 0x1e;
-	if (mode)
-		r |= (1 << 6) | (start << 5);
-	else
-		r |= (1 << 7) | (start);
-	return cx24123_writereg(state, 0x23, r);
-}
-
-static int cx24123_initfe(struct dvb_frontend *fe)
-{
-	struct cx24123_state *state = fe->demodulator_priv;
-	int i;
-
-	dprintk("init frontend\n");
-
-	/* Configure the demod to a good set of defaults */
-	for (i = 0; i < ARRAY_SIZE(cx24123_regdata); i++)
-		cx24123_writereg(state, cx24123_regdata[i].reg,
-			cx24123_regdata[i].data);
-
-	/* Set the LNB polarity */
-	if (state->config->lnb_polarity)
-		cx24123_writereg(state, 0x32,
-			cx24123_readreg(state, 0x32) | 0x02);
-
-	if (state->config->dont_use_pll)
-		cx24123_repeater_mode(state, 1, 0);
-
-	return 0;
-}
-
-static int cx24123_set_voltage(struct dvb_frontend *fe,
-	fe_sec_voltage_t voltage)
-{
-	struct cx24123_state *state = fe->demodulator_priv;
-	u8 val;
-
-	val = cx24123_readreg(state, 0x29) & ~0x40;
-
-	switch (voltage) {
-	case SEC_VOLTAGE_13:
-		dprintk("setting voltage 13V\n");
-		return cx24123_writereg(state, 0x29, val & 0x7f);
-	case SEC_VOLTAGE_18:
-		dprintk("setting voltage 18V\n");
-		return cx24123_writereg(state, 0x29, val | 0x80);
-	case SEC_VOLTAGE_OFF:
-		/* already handled in cx88-dvb */
-		return 0;
-	default:
-		return -EINVAL;
-	};
-
-	return 0;
-}
-
-/* wait for diseqc queue to become ready (or timeout) */
-static void cx24123_wait_for_diseqc(struct cx24123_state *state)
-{
-	unsigned long timeout = jiffies + msecs_to_jiffies(200);
-	while (!(cx24123_readreg(state, 0x29) & 0x40)) {
-		if (time_after(jiffies, timeout)) {
-			err("%s: diseqc queue not ready, " \
-				"command may be lost.\n", __func__);
-			break;
-		}
-		msleep(10);
-	}
-}
-
-static int cx24123_send_diseqc_msg(struct dvb_frontend *fe,
-	struct dvb_diseqc_master_cmd *cmd)
-{
-	struct cx24123_state *state = fe->demodulator_priv;
-	int i, val, tone;
-
-	dprintk("\n");
-
-	/* stop continuous tone if enabled */
-	tone = cx24123_readreg(state, 0x29);
-	if (tone & 0x10)
-		cx24123_writereg(state, 0x29, tone & ~0x50);
-
-	/* wait for diseqc queue ready */
-	cx24123_wait_for_diseqc(state);
-
-	/* select tone mode */
-	cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) & 0xfb);
-
-	for (i = 0; i < cmd->msg_len; i++)
-		cx24123_writereg(state, 0x2C + i, cmd->msg[i]);
-
-	val = cx24123_readreg(state, 0x29);
-	cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40) |
-		((cmd->msg_len-3) & 3));
-
-	/* wait for diseqc message to finish sending */
-	cx24123_wait_for_diseqc(state);
-
-	/* restart continuous tone if enabled */
-	if (tone & 0x10)
-		cx24123_writereg(state, 0x29, tone & ~0x40);
-
-	return 0;
-}
-
-static int cx24123_diseqc_send_burst(struct dvb_frontend *fe,
-	fe_sec_mini_cmd_t burst)
-{
-	struct cx24123_state *state = fe->demodulator_priv;
-	int val, tone;
-
-	dprintk("\n");
-
-	/* stop continuous tone if enabled */
-	tone = cx24123_readreg(state, 0x29);
-	if (tone & 0x10)
-		cx24123_writereg(state, 0x29, tone & ~0x50);
-
-	/* wait for diseqc queue ready */
-	cx24123_wait_for_diseqc(state);
-
-	/* select tone mode */
-	cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) | 0x4);
-	msleep(30);
-	val = cx24123_readreg(state, 0x29);
-	if (burst == SEC_MINI_A)
-		cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40 | 0x00));
-	else if (burst == SEC_MINI_B)
-		cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40 | 0x08));
-	else
-		return -EINVAL;
-
-	cx24123_wait_for_diseqc(state);
-	cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) & 0xfb);
-
-	/* restart continuous tone if enabled */
-	if (tone & 0x10)
-		cx24123_writereg(state, 0x29, tone & ~0x40);
-
-	return 0;
-}
-
-static int cx24123_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct cx24123_state *state = fe->demodulator_priv;
-	int sync = cx24123_readreg(state, 0x14);
-
-	*status = 0;
-	if (state->config->dont_use_pll) {
-		u32 tun_status = 0;
-		if (fe->ops.tuner_ops.get_status)
-			fe->ops.tuner_ops.get_status(fe, &tun_status);
-		if (tun_status & TUNER_STATUS_LOCKED)
-			*status |= FE_HAS_SIGNAL;
-	} else {
-		int lock = cx24123_readreg(state, 0x20);
-		if (lock & 0x01)
-			*status |= FE_HAS_SIGNAL;
-	}
-
-	if (sync & 0x02)
-		*status |= FE_HAS_CARRIER;	/* Phase locked */
-	if (sync & 0x04)
-		*status |= FE_HAS_VITERBI;
-
-	/* Reed-Solomon Status */
-	if (sync & 0x08)
-		*status |= FE_HAS_SYNC;
-	if (sync & 0x80)
-		*status |= FE_HAS_LOCK;		/*Full Sync */
-
-	return 0;
-}
-
-/*
- * Configured to return the measurement of errors in blocks,
- * because no UCBLOCKS value is available, so this value doubles up
- * to satisfy both measurements.
- */
-static int cx24123_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct cx24123_state *state = fe->demodulator_priv;
-
-	/* The true bit error rate is this value divided by
-	   the window size (set as 256 * 255) */
-	*ber = ((cx24123_readreg(state, 0x1c) & 0x3f) << 16) |
-		(cx24123_readreg(state, 0x1d) << 8 |
-		 cx24123_readreg(state, 0x1e));
-
-	dprintk("BER = %d\n", *ber);
-
-	return 0;
-}
-
-static int cx24123_read_signal_strength(struct dvb_frontend *fe,
-	u16 *signal_strength)
-{
-	struct cx24123_state *state = fe->demodulator_priv;
-
-	/* larger = better */
-	*signal_strength = cx24123_readreg(state, 0x3b) << 8;
-
-	dprintk("Signal strength = %d\n", *signal_strength);
-
-	return 0;
-}
-
-static int cx24123_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct cx24123_state *state = fe->demodulator_priv;
-
-	/* Inverted raw Es/N0 count, totally bogus but better than the
-	   BER threshold. */
-	*snr = 65535 - (((u16)cx24123_readreg(state, 0x18) << 8) |
-			 (u16)cx24123_readreg(state, 0x19));
-
-	dprintk("read S/N index = %d\n", *snr);
-
-	return 0;
-}
-
-static int cx24123_set_frontend(struct dvb_frontend *fe)
-{
-	struct cx24123_state *state = fe->demodulator_priv;
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-
-	dprintk("\n");
-
-	if (state->config->set_ts_params)
-		state->config->set_ts_params(fe, 0);
-
-	state->currentfreq = p->frequency;
-	state->currentsymbolrate = p->symbol_rate;
-
-	cx24123_set_inversion(state, p->inversion);
-	cx24123_set_fec(state, p->fec_inner);
-	cx24123_set_symbolrate(state, p->symbol_rate);
-
-	if (!state->config->dont_use_pll)
-		cx24123_pll_tune(fe);
-	else if (fe->ops.tuner_ops.set_params)
-		fe->ops.tuner_ops.set_params(fe);
-	else
-		err("it seems I don't have a tuner...");
-
-	/* Enable automatic acquisition and reset cycle */
-	cx24123_writereg(state, 0x03, (cx24123_readreg(state, 0x03) | 0x07));
-	cx24123_writereg(state, 0x00, 0x10);
-	cx24123_writereg(state, 0x00, 0);
-
-	if (state->config->agc_callback)
-		state->config->agc_callback(fe);
-
-	return 0;
-}
-
-static int cx24123_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct cx24123_state *state = fe->demodulator_priv;
-
-	dprintk("\n");
-
-	if (cx24123_get_inversion(state, &p->inversion) != 0) {
-		err("%s: Failed to get inversion status\n", __func__);
-		return -EREMOTEIO;
-	}
-	if (cx24123_get_fec(state, &p->fec_inner) != 0) {
-		err("%s: Failed to get fec status\n", __func__);
-		return -EREMOTEIO;
-	}
-	p->frequency = state->currentfreq;
-	p->symbol_rate = state->currentsymbolrate;
-
-	return 0;
-}
-
-static int cx24123_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
-{
-	struct cx24123_state *state = fe->demodulator_priv;
-	u8 val;
-
-	/* wait for diseqc queue ready */
-	cx24123_wait_for_diseqc(state);
-
-	val = cx24123_readreg(state, 0x29) & ~0x40;
-
-	switch (tone) {
-	case SEC_TONE_ON:
-		dprintk("setting tone on\n");
-		return cx24123_writereg(state, 0x29, val | 0x10);
-	case SEC_TONE_OFF:
-		dprintk("setting tone off\n");
-		return cx24123_writereg(state, 0x29, val & 0xef);
-	default:
-		err("CASE reached default with tone=%d\n", tone);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int cx24123_tune(struct dvb_frontend *fe,
-			bool re_tune,
-			unsigned int mode_flags,
-			unsigned int *delay,
-			fe_status_t *status)
-{
-	int retval = 0;
-
-	if (re_tune)
-		retval = cx24123_set_frontend(fe);
-
-	if (!(mode_flags & FE_TUNE_MODE_ONESHOT))
-		cx24123_read_status(fe, status);
-	*delay = HZ/10;
-
-	return retval;
-}
-
-static int cx24123_get_algo(struct dvb_frontend *fe)
-{
-	return 1; /* FE_ALGO_HW */
-}
-
-static void cx24123_release(struct dvb_frontend *fe)
-{
-	struct cx24123_state *state = fe->demodulator_priv;
-	dprintk("\n");
-	i2c_del_adapter(&state->tuner_i2c_adapter);
-	kfree(state);
-}
-
-static int cx24123_tuner_i2c_tuner_xfer(struct i2c_adapter *i2c_adap,
-	struct i2c_msg msg[], int num)
-{
-	struct cx24123_state *state = i2c_get_adapdata(i2c_adap);
-	/* this repeater closes after the first stop */
-	cx24123_repeater_mode(state, 1, 1);
-	return i2c_transfer(state->i2c, msg, num);
-}
-
-static u32 cx24123_tuner_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm cx24123_tuner_i2c_algo = {
-	.master_xfer   = cx24123_tuner_i2c_tuner_xfer,
-	.functionality = cx24123_tuner_i2c_func,
-};
-
-struct i2c_adapter *
-	cx24123_get_tuner_i2c_adapter(struct dvb_frontend *fe)
-{
-	struct cx24123_state *state = fe->demodulator_priv;
-	return &state->tuner_i2c_adapter;
-}
-EXPORT_SYMBOL(cx24123_get_tuner_i2c_adapter);
-
-static struct dvb_frontend_ops cx24123_ops;
-
-struct dvb_frontend *cx24123_attach(const struct cx24123_config *config,
-				    struct i2c_adapter *i2c)
-{
-	/* allocate memory for the internal state */
-	struct cx24123_state *state =
-		kzalloc(sizeof(struct cx24123_state), GFP_KERNEL);
-
-	dprintk("\n");
-	if (state == NULL) {
-		err("Unable to kzalloc\n");
-		goto error;
-	}
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-
-	/* check if the demod is there */
-	state->demod_rev = cx24123_readreg(state, 0x00);
-	switch (state->demod_rev) {
-	case 0xe1:
-		info("detected CX24123C\n");
-		break;
-	case 0xd1:
-		info("detected CX24123\n");
-		break;
-	default:
-		err("wrong demod revision: %x\n", state->demod_rev);
-		goto error;
-	}
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &cx24123_ops,
-		sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-
-	/* create tuner i2c adapter */
-	if (config->dont_use_pll)
-		cx24123_repeater_mode(state, 1, 0);
-
-	strlcpy(state->tuner_i2c_adapter.name, "CX24123 tuner I2C bus",
-		sizeof(state->tuner_i2c_adapter.name));
-	state->tuner_i2c_adapter.algo      = &cx24123_tuner_i2c_algo;
-	state->tuner_i2c_adapter.algo_data = NULL;
-	i2c_set_adapdata(&state->tuner_i2c_adapter, state);
-	if (i2c_add_adapter(&state->tuner_i2c_adapter) < 0) {
-		err("tuner i2c bus could not be initialized\n");
-		goto error;
-	}
-
-	return &state->frontend;
-
-error:
-	kfree(state);
-
-	return NULL;
-}
-EXPORT_SYMBOL(cx24123_attach);
-
-static struct dvb_frontend_ops cx24123_ops = {
-	.delsys = { SYS_DVBS },
-	.info = {
-		.name = "Conexant CX24123/CX24109",
-		.frequency_min = 950000,
-		.frequency_max = 2150000,
-		.frequency_stepsize = 1011, /* kHz for QPSK frontends */
-		.frequency_tolerance = 5000,
-		.symbol_rate_min = 1000000,
-		.symbol_rate_max = 45000000,
-		.caps = FE_CAN_INVERSION_AUTO |
-			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
-			FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK | FE_CAN_RECOVER
-	},
-
-	.release = cx24123_release,
-
-	.init = cx24123_initfe,
-	.set_frontend = cx24123_set_frontend,
-	.get_frontend = cx24123_get_frontend,
-	.read_status = cx24123_read_status,
-	.read_ber = cx24123_read_ber,
-	.read_signal_strength = cx24123_read_signal_strength,
-	.read_snr = cx24123_read_snr,
-	.diseqc_send_master_cmd = cx24123_send_diseqc_msg,
-	.diseqc_send_burst = cx24123_diseqc_send_burst,
-	.set_tone = cx24123_set_tone,
-	.set_voltage = cx24123_set_voltage,
-	.tune = cx24123_tune,
-	.get_frontend_algo = cx24123_get_algo,
-};
-
-MODULE_DESCRIPTION("DVB Frontend module for Conexant " \
-	"CX24123/CX24109/CX24113 hardware");
-MODULE_AUTHOR("Steven Toth");
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/media/dvb/frontends/cx24123.h b/drivers/media/dvb/frontends/cx24123.h
deleted file mode 100644
index 51ae866..0000000
--- a/drivers/media/dvb/frontends/cx24123.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
-    Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver
-
-    Copyright (C) 2005 Steven Toth <stoth@linuxtv.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef CX24123_H
-#define CX24123_H
-
-#include <linux/dvb/frontend.h>
-
-struct cx24123_config {
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* Need to set device param for start_dma */
-	int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured);
-
-	/* 0 = LNB voltage normal, 1 = LNB voltage inverted */
-	int lnb_polarity;
-
-	/* this device has another tuner */
-	u8 dont_use_pll;
-	void (*agc_callback) (struct dvb_frontend *);
-};
-
-#if defined(CONFIG_DVB_CX24123) || (defined(CONFIG_DVB_CX24123_MODULE) \
-	&& defined(MODULE))
-extern struct dvb_frontend *cx24123_attach(const struct cx24123_config *config,
-					   struct i2c_adapter *i2c);
-extern struct i2c_adapter *cx24123_get_tuner_i2c_adapter(struct dvb_frontend *);
-#else
-static inline struct dvb_frontend *cx24123_attach(
-	const struct cx24123_config *config, struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-static struct i2c_adapter *
-	cx24123_get_tuner_i2c_adapter(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif /* CX24123_H */
diff --git a/drivers/media/dvb/frontends/cxd2820r.h b/drivers/media/dvb/frontends/cxd2820r.h
deleted file mode 100644
index 5aa306e..0000000
--- a/drivers/media/dvb/frontends/cxd2820r.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Sony CXD2820R demodulator driver
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-
-#ifndef CXD2820R_H
-#define CXD2820R_H
-
-#include <linux/dvb/frontend.h>
-
-#define CXD2820R_GPIO_D (0 << 0) /* disable */
-#define CXD2820R_GPIO_E (1 << 0) /* enable */
-#define CXD2820R_GPIO_O (0 << 1) /* output */
-#define CXD2820R_GPIO_I (1 << 1) /* input */
-#define CXD2820R_GPIO_L (0 << 2) /* output low */
-#define CXD2820R_GPIO_H (1 << 2) /* output high */
-
-#define CXD2820R_TS_SERIAL        0x08
-#define CXD2820R_TS_SERIAL_MSB    0x28
-#define CXD2820R_TS_PARALLEL      0x30
-#define CXD2820R_TS_PARALLEL_MSB  0x70
-
-struct cxd2820r_config {
-	/* Demodulator I2C address.
-	 * Driver determines DVB-C slave I2C address automatically from master
-	 * address.
-	 * Default: none, must set
-	 * Values: 0x6c, 0x6d
-	 */
-	u8 i2c_address;
-
-	/* TS output mode.
-	 * Default: none, must set.
-	 * Values:
-	 */
-	u8 ts_mode;
-
-	/* IF AGC polarity.
-	 * Default: 0
-	 * Values: 0, 1
-	 */
-	bool if_agc_polarity;
-
-	/* Spectrum inversion.
-	 * Default: 0
-	 * Values: 0, 1
-	 */
-	bool spec_inv;
-
-	/* GPIOs for all used modes.
-	 * Default: none, disabled
-	 * Values: <see above>
-	 */
-	u8 gpio_dvbt[3];
-	u8 gpio_dvbt2[3];
-	u8 gpio_dvbc[3];
-};
-
-
-#if defined(CONFIG_DVB_CXD2820R) || \
-	(defined(CONFIG_DVB_CXD2820R_MODULE) && defined(MODULE))
-extern struct dvb_frontend *cxd2820r_attach(
-	const struct cxd2820r_config *config,
-	struct i2c_adapter *i2c
-);
-#else
-static inline struct dvb_frontend *cxd2820r_attach(
-	const struct cxd2820r_config *config,
-	struct i2c_adapter *i2c
-)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-#endif
-
-#endif /* CXD2820R_H */
diff --git a/drivers/media/dvb/frontends/cxd2820r_c.c b/drivers/media/dvb/frontends/cxd2820r_c.c
deleted file mode 100644
index ed3b0ba6..0000000
--- a/drivers/media/dvb/frontends/cxd2820r_c.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * Sony CXD2820R demodulator driver
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-
-#include "cxd2820r_priv.h"
-
-int cxd2820r_set_frontend_c(struct dvb_frontend *fe)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	int ret, i;
-	u8 buf[2];
-	u32 if_freq;
-	u16 if_ctl;
-	u64 num;
-	struct reg_val_mask tab[] = {
-		{ 0x00080, 0x01, 0xff },
-		{ 0x00081, 0x05, 0xff },
-		{ 0x00085, 0x07, 0xff },
-		{ 0x00088, 0x01, 0xff },
-
-		{ 0x00082, 0x20, 0x60 },
-		{ 0x1016a, 0x48, 0xff },
-		{ 0x100a5, 0x00, 0x01 },
-		{ 0x10020, 0x06, 0x07 },
-		{ 0x10059, 0x50, 0xff },
-		{ 0x10087, 0x0c, 0x3c },
-		{ 0x1008b, 0x07, 0xff },
-		{ 0x1001f, priv->cfg.if_agc_polarity << 7, 0x80 },
-		{ 0x10070, priv->cfg.ts_mode, 0xff },
-	};
-
-	dbg("%s: RF=%d SR=%d", __func__, c->frequency, c->symbol_rate);
-
-	/* update GPIOs */
-	ret = cxd2820r_gpio(fe);
-	if (ret)
-		goto error;
-
-	/* program tuner */
-	if (fe->ops.tuner_ops.set_params)
-		fe->ops.tuner_ops.set_params(fe);
-
-	if (priv->delivery_system !=  SYS_DVBC_ANNEX_A) {
-		for (i = 0; i < ARRAY_SIZE(tab); i++) {
-			ret = cxd2820r_wr_reg_mask(priv, tab[i].reg,
-				tab[i].val, tab[i].mask);
-			if (ret)
-				goto error;
-		}
-	}
-
-	priv->delivery_system = SYS_DVBC_ANNEX_A;
-	priv->ber_running = 0; /* tune stops BER counter */
-
-	/* program IF frequency */
-	if (fe->ops.tuner_ops.get_if_frequency) {
-		ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_freq);
-		if (ret)
-			goto error;
-	} else
-		if_freq = 0;
-
-	dbg("%s: if_freq=%d", __func__, if_freq);
-
-	num = if_freq / 1000; /* Hz => kHz */
-	num *= 0x4000;
-	if_ctl = cxd2820r_div_u64_round_closest(num, 41000);
-	buf[0] = (if_ctl >> 8) & 0x3f;
-	buf[1] = (if_ctl >> 0) & 0xff;
-
-	ret = cxd2820r_wr_regs(priv, 0x10042, buf, 2);
-	if (ret)
-		goto error;
-
-	ret = cxd2820r_wr_reg(priv, 0x000ff, 0x08);
-	if (ret)
-		goto error;
-
-	ret = cxd2820r_wr_reg(priv, 0x000fe, 0x01);
-	if (ret)
-		goto error;
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_get_frontend_c(struct dvb_frontend *fe)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	int ret;
-	u8 buf[2];
-
-	ret = cxd2820r_rd_regs(priv, 0x1001a, buf, 2);
-	if (ret)
-		goto error;
-
-	c->symbol_rate = 2500 * ((buf[0] & 0x0f) << 8 | buf[1]);
-
-	ret = cxd2820r_rd_reg(priv, 0x10019, &buf[0]);
-	if (ret)
-		goto error;
-
-	switch ((buf[0] >> 0) & 0x07) {
-	case 0:
-		c->modulation = QAM_16;
-		break;
-	case 1:
-		c->modulation = QAM_32;
-		break;
-	case 2:
-		c->modulation = QAM_64;
-		break;
-	case 3:
-		c->modulation = QAM_128;
-		break;
-	case 4:
-		c->modulation = QAM_256;
-		break;
-	}
-
-	switch ((buf[0] >> 7) & 0x01) {
-	case 0:
-		c->inversion = INVERSION_OFF;
-		break;
-	case 1:
-		c->inversion = INVERSION_ON;
-		break;
-	}
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_read_ber_c(struct dvb_frontend *fe, u32 *ber)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	int ret;
-	u8 buf[3], start_ber = 0;
-	*ber = 0;
-
-	if (priv->ber_running) {
-		ret = cxd2820r_rd_regs(priv, 0x10076, buf, sizeof(buf));
-		if (ret)
-			goto error;
-
-		if ((buf[2] >> 7) & 0x01 || (buf[2] >> 4) & 0x01) {
-			*ber = (buf[2] & 0x0f) << 16 | buf[1] << 8 | buf[0];
-			start_ber = 1;
-		}
-	} else {
-		priv->ber_running = 1;
-		start_ber = 1;
-	}
-
-	if (start_ber) {
-		/* (re)start BER */
-		ret = cxd2820r_wr_reg(priv, 0x10079, 0x01);
-		if (ret)
-			goto error;
-	}
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_read_signal_strength_c(struct dvb_frontend *fe,
-	u16 *strength)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	int ret;
-	u8 buf[2];
-	u16 tmp;
-
-	ret = cxd2820r_rd_regs(priv, 0x10049, buf, sizeof(buf));
-	if (ret)
-		goto error;
-
-	tmp = (buf[0] & 0x03) << 8 | buf[1];
-	tmp = (~tmp & 0x03ff);
-
-	if (tmp == 512)
-		/* ~no signal */
-		tmp = 0;
-	else if (tmp > 350)
-		tmp = 350;
-
-	/* scale value to 0x0000-0xffff */
-	*strength = tmp * 0xffff / (350-0);
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_read_snr_c(struct dvb_frontend *fe, u16 *snr)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	int ret;
-	u8 tmp;
-	unsigned int A, B;
-	/* report SNR in dB * 10 */
-
-	ret = cxd2820r_rd_reg(priv, 0x10019, &tmp);
-	if (ret)
-		goto error;
-
-	if (((tmp >> 0) & 0x03) % 2) {
-		A = 875;
-		B = 650;
-	} else {
-		A = 950;
-		B = 760;
-	}
-
-	ret = cxd2820r_rd_reg(priv, 0x1004d, &tmp);
-	if (ret)
-		goto error;
-
-	#define CXD2820R_LOG2_E_24 24204406 /* log2(e) << 24 */
-	if (tmp)
-		*snr = A * (intlog2(B / tmp) >> 5) / (CXD2820R_LOG2_E_24 >> 5)
-			/ 10;
-	else
-		*snr = 0;
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_read_ucblocks_c(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	*ucblocks = 0;
-	/* no way to read ? */
-	return 0;
-}
-
-int cxd2820r_read_status_c(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	int ret;
-	u8 buf[2];
-	*status = 0;
-
-	ret = cxd2820r_rd_regs(priv, 0x10088, buf, sizeof(buf));
-	if (ret)
-		goto error;
-
-	if (((buf[0] >> 0) & 0x01) == 1) {
-		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
-			FE_HAS_VITERBI | FE_HAS_SYNC;
-
-		if (((buf[1] >> 3) & 0x01) == 1) {
-			*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
-				FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
-		}
-	}
-
-	dbg("%s: lock=%02x %02x", __func__, buf[0], buf[1]);
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_init_c(struct dvb_frontend *fe)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	int ret;
-
-	ret = cxd2820r_wr_reg(priv, 0x00085, 0x07);
-	if (ret)
-		goto error;
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_sleep_c(struct dvb_frontend *fe)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	int ret, i;
-	struct reg_val_mask tab[] = {
-		{ 0x000ff, 0x1f, 0xff },
-		{ 0x00085, 0x00, 0xff },
-		{ 0x00088, 0x01, 0xff },
-		{ 0x00081, 0x00, 0xff },
-		{ 0x00080, 0x00, 0xff },
-	};
-
-	dbg("%s", __func__);
-
-	priv->delivery_system = SYS_UNDEFINED;
-
-	for (i = 0; i < ARRAY_SIZE(tab); i++) {
-		ret = cxd2820r_wr_reg_mask(priv, tab[i].reg, tab[i].val,
-			tab[i].mask);
-		if (ret)
-			goto error;
-	}
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_get_tune_settings_c(struct dvb_frontend *fe,
-	struct dvb_frontend_tune_settings *s)
-{
-	s->min_delay_ms = 500;
-	s->step_size = 0; /* no zigzag */
-	s->max_drift = 0;
-
-	return 0;
-}
diff --git a/drivers/media/dvb/frontends/cxd2820r_core.c b/drivers/media/dvb/frontends/cxd2820r_core.c
deleted file mode 100644
index 3bba37d..0000000
--- a/drivers/media/dvb/frontends/cxd2820r_core.c
+++ /dev/null
@@ -1,646 +0,0 @@
-/*
- * Sony CXD2820R demodulator driver
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-
-#include "cxd2820r_priv.h"
-
-int cxd2820r_debug;
-module_param_named(debug, cxd2820r_debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-/* write multiple registers */
-static int cxd2820r_wr_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg,
-	u8 *val, int len)
-{
-	int ret;
-	u8 buf[len+1];
-	struct i2c_msg msg[1] = {
-		{
-			.addr = i2c,
-			.flags = 0,
-			.len = sizeof(buf),
-			.buf = buf,
-		}
-	};
-
-	buf[0] = reg;
-	memcpy(&buf[1], val, len);
-
-	ret = i2c_transfer(priv->i2c, msg, 1);
-	if (ret == 1) {
-		ret = 0;
-	} else {
-		warn("i2c wr failed ret:%d reg:%02x len:%d", ret, reg, len);
-		ret = -EREMOTEIO;
-	}
-	return ret;
-}
-
-/* read multiple registers */
-static int cxd2820r_rd_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg,
-	u8 *val, int len)
-{
-	int ret;
-	u8 buf[len];
-	struct i2c_msg msg[2] = {
-		{
-			.addr = i2c,
-			.flags = 0,
-			.len = 1,
-			.buf = &reg,
-		}, {
-			.addr = i2c,
-			.flags = I2C_M_RD,
-			.len = sizeof(buf),
-			.buf = buf,
-		}
-	};
-
-	ret = i2c_transfer(priv->i2c, msg, 2);
-	if (ret == 2) {
-		memcpy(val, buf, len);
-		ret = 0;
-	} else {
-		warn("i2c rd failed ret:%d reg:%02x len:%d", ret, reg, len);
-		ret = -EREMOTEIO;
-	}
-
-	return ret;
-}
-
-/* write multiple registers */
-int cxd2820r_wr_regs(struct cxd2820r_priv *priv, u32 reginfo, u8 *val,
-	int len)
-{
-	int ret;
-	u8 i2c_addr;
-	u8 reg = (reginfo >> 0) & 0xff;
-	u8 bank = (reginfo >> 8) & 0xff;
-	u8 i2c = (reginfo >> 16) & 0x01;
-
-	/* select I2C */
-	if (i2c)
-		i2c_addr = priv->cfg.i2c_address | (1 << 1); /* DVB-C */
-	else
-		i2c_addr = priv->cfg.i2c_address; /* DVB-T/T2 */
-
-	/* switch bank if needed */
-	if (bank != priv->bank[i2c]) {
-		ret = cxd2820r_wr_regs_i2c(priv, i2c_addr, 0x00, &bank, 1);
-		if (ret)
-			return ret;
-		priv->bank[i2c] = bank;
-	}
-	return cxd2820r_wr_regs_i2c(priv, i2c_addr, reg, val, len);
-}
-
-/* read multiple registers */
-int cxd2820r_rd_regs(struct cxd2820r_priv *priv, u32 reginfo, u8 *val,
-	int len)
-{
-	int ret;
-	u8 i2c_addr;
-	u8 reg = (reginfo >> 0) & 0xff;
-	u8 bank = (reginfo >> 8) & 0xff;
-	u8 i2c = (reginfo >> 16) & 0x01;
-
-	/* select I2C */
-	if (i2c)
-		i2c_addr = priv->cfg.i2c_address | (1 << 1); /* DVB-C */
-	else
-		i2c_addr = priv->cfg.i2c_address; /* DVB-T/T2 */
-
-	/* switch bank if needed */
-	if (bank != priv->bank[i2c]) {
-		ret = cxd2820r_wr_regs_i2c(priv, i2c_addr, 0x00, &bank, 1);
-		if (ret)
-			return ret;
-		priv->bank[i2c] = bank;
-	}
-	return cxd2820r_rd_regs_i2c(priv, i2c_addr, reg, val, len);
-}
-
-/* write single register */
-int cxd2820r_wr_reg(struct cxd2820r_priv *priv, u32 reg, u8 val)
-{
-	return cxd2820r_wr_regs(priv, reg, &val, 1);
-}
-
-/* read single register */
-int cxd2820r_rd_reg(struct cxd2820r_priv *priv, u32 reg, u8 *val)
-{
-	return cxd2820r_rd_regs(priv, reg, val, 1);
-}
-
-/* write single register with mask */
-int cxd2820r_wr_reg_mask(struct cxd2820r_priv *priv, u32 reg, u8 val,
-	u8 mask)
-{
-	int ret;
-	u8 tmp;
-
-	/* no need for read if whole reg is written */
-	if (mask != 0xff) {
-		ret = cxd2820r_rd_reg(priv, reg, &tmp);
-		if (ret)
-			return ret;
-
-		val &= mask;
-		tmp &= ~mask;
-		val |= tmp;
-	}
-
-	return cxd2820r_wr_reg(priv, reg, val);
-}
-
-int cxd2820r_gpio(struct dvb_frontend *fe)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	int ret, i;
-	u8 *gpio, tmp0, tmp1;
-	dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system);
-
-	switch (fe->dtv_property_cache.delivery_system) {
-	case SYS_DVBT:
-		gpio = priv->cfg.gpio_dvbt;
-		break;
-	case SYS_DVBT2:
-		gpio = priv->cfg.gpio_dvbt2;
-		break;
-	case SYS_DVBC_ANNEX_AC:
-		gpio = priv->cfg.gpio_dvbc;
-		break;
-	default:
-		ret = -EINVAL;
-		goto error;
-	}
-
-	/* update GPIOs only when needed */
-	if (!memcmp(gpio, priv->gpio, sizeof(priv->gpio)))
-		return 0;
-
-	tmp0 = 0x00;
-	tmp1 = 0x00;
-	for (i = 0; i < sizeof(priv->gpio); i++) {
-		/* enable / disable */
-		if (gpio[i] & CXD2820R_GPIO_E)
-			tmp0 |= (2 << 6) >> (2 * i);
-		else
-			tmp0 |= (1 << 6) >> (2 * i);
-
-		/* input / output */
-		if (gpio[i] & CXD2820R_GPIO_I)
-			tmp1 |= (1 << (3 + i));
-		else
-			tmp1 |= (0 << (3 + i));
-
-		/* high / low */
-		if (gpio[i] & CXD2820R_GPIO_H)
-			tmp1 |= (1 << (0 + i));
-		else
-			tmp1 |= (0 << (0 + i));
-
-		dbg("%s: GPIO i=%d %02x %02x", __func__, i, tmp0, tmp1);
-	}
-
-	dbg("%s: wr gpio=%02x %02x", __func__, tmp0, tmp1);
-
-	/* write bits [7:2] */
-	ret = cxd2820r_wr_reg_mask(priv, 0x00089, tmp0, 0xfc);
-	if (ret)
-		goto error;
-
-	/* write bits [5:0] */
-	ret = cxd2820r_wr_reg_mask(priv, 0x0008e, tmp1, 0x3f);
-	if (ret)
-		goto error;
-
-	memcpy(priv->gpio, gpio, sizeof(priv->gpio));
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-/* 64 bit div with round closest, like DIV_ROUND_CLOSEST but 64 bit */
-u32 cxd2820r_div_u64_round_closest(u64 dividend, u32 divisor)
-{
-	return div_u64(dividend + (divisor / 2), divisor);
-}
-
-static int cxd2820r_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	int ret;
-
-	dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system);
-	switch (c->delivery_system) {
-	case SYS_DVBT:
-		ret = cxd2820r_init_t(fe);
-		if (ret < 0)
-			goto err;
-		ret = cxd2820r_set_frontend_t(fe);
-		if (ret < 0)
-			goto err;
-		break;
-	case SYS_DVBT2:
-		ret = cxd2820r_init_t(fe);
-		if (ret < 0)
-			goto err;
-		ret = cxd2820r_set_frontend_t2(fe);
-		if (ret < 0)
-			goto err;
-		break;
-	case SYS_DVBC_ANNEX_A:
-		ret = cxd2820r_init_c(fe);
-		if (ret < 0)
-			goto err;
-		ret = cxd2820r_set_frontend_c(fe);
-		if (ret < 0)
-			goto err;
-		break;
-	default:
-		dbg("%s: error state=%d", __func__, fe->dtv_property_cache.delivery_system);
-		ret = -EINVAL;
-		break;
-	}
-err:
-	return ret;
-}
-static int cxd2820r_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	int ret;
-
-	dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system);
-	switch (fe->dtv_property_cache.delivery_system) {
-	case SYS_DVBT:
-		ret = cxd2820r_read_status_t(fe, status);
-		break;
-	case SYS_DVBT2:
-		ret = cxd2820r_read_status_t2(fe, status);
-		break;
-	case SYS_DVBC_ANNEX_A:
-		ret = cxd2820r_read_status_c(fe, status);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	return ret;
-}
-
-static int cxd2820r_get_frontend(struct dvb_frontend *fe)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	int ret;
-
-	dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system);
-
-	if (priv->delivery_system == SYS_UNDEFINED)
-		return 0;
-
-	switch (fe->dtv_property_cache.delivery_system) {
-	case SYS_DVBT:
-		ret = cxd2820r_get_frontend_t(fe);
-		break;
-	case SYS_DVBT2:
-		ret = cxd2820r_get_frontend_t2(fe);
-		break;
-	case SYS_DVBC_ANNEX_A:
-		ret = cxd2820r_get_frontend_c(fe);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	return ret;
-}
-
-static int cxd2820r_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	int ret;
-
-	dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system);
-	switch (fe->dtv_property_cache.delivery_system) {
-	case SYS_DVBT:
-		ret = cxd2820r_read_ber_t(fe, ber);
-		break;
-	case SYS_DVBT2:
-		ret = cxd2820r_read_ber_t2(fe, ber);
-		break;
-	case SYS_DVBC_ANNEX_A:
-		ret = cxd2820r_read_ber_c(fe, ber);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	return ret;
-}
-
-static int cxd2820r_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	int ret;
-
-	dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system);
-	switch (fe->dtv_property_cache.delivery_system) {
-	case SYS_DVBT:
-		ret = cxd2820r_read_signal_strength_t(fe, strength);
-		break;
-	case SYS_DVBT2:
-		ret = cxd2820r_read_signal_strength_t2(fe, strength);
-		break;
-	case SYS_DVBC_ANNEX_A:
-		ret = cxd2820r_read_signal_strength_c(fe, strength);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	return ret;
-}
-
-static int cxd2820r_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	int ret;
-
-	dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system);
-	switch (fe->dtv_property_cache.delivery_system) {
-	case SYS_DVBT:
-		ret = cxd2820r_read_snr_t(fe, snr);
-		break;
-	case SYS_DVBT2:
-		ret = cxd2820r_read_snr_t2(fe, snr);
-		break;
-	case SYS_DVBC_ANNEX_A:
-		ret = cxd2820r_read_snr_c(fe, snr);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	return ret;
-}
-
-static int cxd2820r_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	int ret;
-
-	dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system);
-	switch (fe->dtv_property_cache.delivery_system) {
-	case SYS_DVBT:
-		ret = cxd2820r_read_ucblocks_t(fe, ucblocks);
-		break;
-	case SYS_DVBT2:
-		ret = cxd2820r_read_ucblocks_t2(fe, ucblocks);
-		break;
-	case SYS_DVBC_ANNEX_A:
-		ret = cxd2820r_read_ucblocks_c(fe, ucblocks);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	return ret;
-}
-
-static int cxd2820r_init(struct dvb_frontend *fe)
-{
-	return 0;
-}
-
-static int cxd2820r_sleep(struct dvb_frontend *fe)
-{
-	int ret;
-
-	dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system);
-	switch (fe->dtv_property_cache.delivery_system) {
-	case SYS_DVBT:
-		ret = cxd2820r_sleep_t(fe);
-		break;
-	case SYS_DVBT2:
-		ret = cxd2820r_sleep_t2(fe);
-		break;
-	case SYS_DVBC_ANNEX_A:
-		ret = cxd2820r_sleep_c(fe);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	return ret;
-}
-
-static int cxd2820r_get_tune_settings(struct dvb_frontend *fe,
-				      struct dvb_frontend_tune_settings *s)
-{
-	int ret;
-
-	dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system);
-	switch (fe->dtv_property_cache.delivery_system) {
-	case SYS_DVBT:
-		ret = cxd2820r_get_tune_settings_t(fe, s);
-		break;
-	case SYS_DVBT2:
-		ret = cxd2820r_get_tune_settings_t2(fe, s);
-		break;
-	case SYS_DVBC_ANNEX_A:
-		ret = cxd2820r_get_tune_settings_c(fe, s);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	return ret;
-}
-
-static enum dvbfe_search cxd2820r_search(struct dvb_frontend *fe)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	int ret, i;
-	fe_status_t status = 0;
-	dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system);
-
-	/* switch between DVB-T and DVB-T2 when tune fails */
-	if (priv->last_tune_failed) {
-		if (priv->delivery_system == SYS_DVBT) {
-			ret = cxd2820r_sleep_t(fe);
-			if (ret)
-				goto error;
-
-			c->delivery_system = SYS_DVBT2;
-		} else if (priv->delivery_system == SYS_DVBT2) {
-			ret = cxd2820r_sleep_t2(fe);
-			if (ret)
-				goto error;
-
-			c->delivery_system = SYS_DVBT;
-		}
-	}
-
-	/* set frontend */
-	ret = cxd2820r_set_frontend(fe);
-	if (ret)
-		goto error;
-
-
-	/* frontend lock wait loop count */
-	switch (priv->delivery_system) {
-	case SYS_DVBT:
-	case SYS_DVBC_ANNEX_A:
-		i = 20;
-		break;
-	case SYS_DVBT2:
-		i = 40;
-		break;
-	case SYS_UNDEFINED:
-	default:
-		i = 0;
-		break;
-	}
-
-	/* wait frontend lock */
-	for (; i > 0; i--) {
-		dbg("%s: LOOP=%d", __func__, i);
-		msleep(50);
-		ret = cxd2820r_read_status(fe, &status);
-		if (ret)
-			goto error;
-
-		if (status & FE_HAS_LOCK)
-			break;
-	}
-
-	/* check if we have a valid signal */
-	if (status & FE_HAS_LOCK) {
-		priv->last_tune_failed = 0;
-		return DVBFE_ALGO_SEARCH_SUCCESS;
-	} else {
-		priv->last_tune_failed = 1;
-		return DVBFE_ALGO_SEARCH_AGAIN;
-	}
-
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return DVBFE_ALGO_SEARCH_ERROR;
-}
-
-static int cxd2820r_get_frontend_algo(struct dvb_frontend *fe)
-{
-	return DVBFE_ALGO_CUSTOM;
-}
-
-static void cxd2820r_release(struct dvb_frontend *fe)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	dbg("%s", __func__);
-
-	kfree(priv);
-	return;
-}
-
-static int cxd2820r_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	dbg("%s: %d", __func__, enable);
-
-	/* Bit 0 of reg 0xdb in bank 0x00 controls I2C repeater */
-	return cxd2820r_wr_reg_mask(priv, 0xdb, enable ? 1 : 0, 0x1);
-}
-
-static const struct dvb_frontend_ops cxd2820r_ops = {
-	.delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A },
-	/* default: DVB-T/T2 */
-	.info = {
-		.name = "Sony CXD2820R",
-
-		.caps =	FE_CAN_FEC_1_2			|
-			FE_CAN_FEC_2_3			|
-			FE_CAN_FEC_3_4			|
-			FE_CAN_FEC_5_6			|
-			FE_CAN_FEC_7_8			|
-			FE_CAN_FEC_AUTO			|
-			FE_CAN_QPSK			|
-			FE_CAN_QAM_16			|
-			FE_CAN_QAM_32			|
-			FE_CAN_QAM_64			|
-			FE_CAN_QAM_128			|
-			FE_CAN_QAM_256			|
-			FE_CAN_QAM_AUTO			|
-			FE_CAN_TRANSMISSION_MODE_AUTO	|
-			FE_CAN_GUARD_INTERVAL_AUTO	|
-			FE_CAN_HIERARCHY_AUTO		|
-			FE_CAN_MUTE_TS			|
-			FE_CAN_2G_MODULATION
-		},
-
-	.release		= cxd2820r_release,
-	.init			= cxd2820r_init,
-	.sleep			= cxd2820r_sleep,
-
-	.get_tune_settings	= cxd2820r_get_tune_settings,
-	.i2c_gate_ctrl		= cxd2820r_i2c_gate_ctrl,
-
-	.get_frontend		= cxd2820r_get_frontend,
-
-	.get_frontend_algo	= cxd2820r_get_frontend_algo,
-	.search			= cxd2820r_search,
-
-	.read_status		= cxd2820r_read_status,
-	.read_snr		= cxd2820r_read_snr,
-	.read_ber		= cxd2820r_read_ber,
-	.read_ucblocks		= cxd2820r_read_ucblocks,
-	.read_signal_strength	= cxd2820r_read_signal_strength,
-};
-
-struct dvb_frontend *cxd2820r_attach(const struct cxd2820r_config *cfg,
-		struct i2c_adapter *i2c)
-{
-	struct cxd2820r_priv *priv = NULL;
-	int ret;
-	u8 tmp;
-
-	priv = kzalloc(sizeof (struct cxd2820r_priv), GFP_KERNEL);
-	if (!priv)
-		goto error;
-
-	priv->i2c = i2c;
-	memcpy(&priv->cfg, cfg, sizeof (struct cxd2820r_config));
-
-	priv->bank[0] = priv->bank[1] = 0xff;
-	ret = cxd2820r_rd_reg(priv, 0x000fd, &tmp);
-	dbg("%s: chip id=%02x", __func__, tmp);
-	if (ret || tmp != 0xe1)
-		goto error;
-
-	memcpy(&priv->fe.ops, &cxd2820r_ops, sizeof (struct dvb_frontend_ops));
-	priv->fe.demodulator_priv = priv;
-	return &priv->fe;
-error:
-	kfree(priv);
-	return NULL;
-}
-EXPORT_SYMBOL(cxd2820r_attach);
-
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_DESCRIPTION("Sony CXD2820R demodulator driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/cxd2820r_priv.h b/drivers/media/dvb/frontends/cxd2820r_priv.h
deleted file mode 100644
index 9a9822c..0000000
--- a/drivers/media/dvb/frontends/cxd2820r_priv.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Sony CXD2820R demodulator driver
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-
-#ifndef CXD2820R_PRIV_H
-#define CXD2820R_PRIV_H
-
-#include <linux/dvb/version.h>
-#include "dvb_frontend.h"
-#include "dvb_math.h"
-#include "cxd2820r.h"
-
-#define LOG_PREFIX "cxd2820r"
-
-#undef dbg
-#define dbg(f, arg...) \
-	if (cxd2820r_debug) \
-		printk(KERN_INFO   LOG_PREFIX": " f "\n" , ## arg)
-#undef err
-#define err(f, arg...)  printk(KERN_ERR     LOG_PREFIX": " f "\n" , ## arg)
-#undef info
-#define info(f, arg...) printk(KERN_INFO    LOG_PREFIX": " f "\n" , ## arg)
-#undef warn
-#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg)
-
-struct reg_val_mask {
-	u32 reg;
-	u8  val;
-	u8  mask;
-};
-
-struct cxd2820r_priv {
-	struct i2c_adapter *i2c;
-	struct dvb_frontend fe;
-	struct cxd2820r_config cfg;
-
-	bool ber_running;
-
-	u8 bank[2];
-	u8 gpio[3];
-
-	fe_delivery_system_t delivery_system;
-	bool last_tune_failed; /* for switch between T and T2 tune */
-};
-
-/* cxd2820r_core.c */
-
-extern int cxd2820r_debug;
-
-int cxd2820r_gpio(struct dvb_frontend *fe);
-
-int cxd2820r_wr_reg_mask(struct cxd2820r_priv *priv, u32 reg, u8 val,
-	u8 mask);
-
-int cxd2820r_wr_regs(struct cxd2820r_priv *priv, u32 reginfo, u8 *val,
-	int len);
-
-u32 cxd2820r_div_u64_round_closest(u64 dividend, u32 divisor);
-
-int cxd2820r_wr_regs(struct cxd2820r_priv *priv, u32 reginfo, u8 *val,
-	int len);
-
-int cxd2820r_rd_regs(struct cxd2820r_priv *priv, u32 reginfo, u8 *val,
-	int len);
-
-int cxd2820r_wr_reg(struct cxd2820r_priv *priv, u32 reg, u8 val);
-
-int cxd2820r_rd_reg(struct cxd2820r_priv *priv, u32 reg, u8 *val);
-
-/* cxd2820r_c.c */
-
-int cxd2820r_get_frontend_c(struct dvb_frontend *fe);
-
-int cxd2820r_set_frontend_c(struct dvb_frontend *fe);
-
-int cxd2820r_read_status_c(struct dvb_frontend *fe, fe_status_t *status);
-
-int cxd2820r_read_ber_c(struct dvb_frontend *fe, u32 *ber);
-
-int cxd2820r_read_signal_strength_c(struct dvb_frontend *fe, u16 *strength);
-
-int cxd2820r_read_snr_c(struct dvb_frontend *fe, u16 *snr);
-
-int cxd2820r_read_ucblocks_c(struct dvb_frontend *fe, u32 *ucblocks);
-
-int cxd2820r_init_c(struct dvb_frontend *fe);
-
-int cxd2820r_sleep_c(struct dvb_frontend *fe);
-
-int cxd2820r_get_tune_settings_c(struct dvb_frontend *fe,
-	struct dvb_frontend_tune_settings *s);
-
-/* cxd2820r_t.c */
-
-int cxd2820r_get_frontend_t(struct dvb_frontend *fe);
-
-int cxd2820r_set_frontend_t(struct dvb_frontend *fe);
-
-int cxd2820r_read_status_t(struct dvb_frontend *fe, fe_status_t *status);
-
-int cxd2820r_read_ber_t(struct dvb_frontend *fe, u32 *ber);
-
-int cxd2820r_read_signal_strength_t(struct dvb_frontend *fe, u16 *strength);
-
-int cxd2820r_read_snr_t(struct dvb_frontend *fe, u16 *snr);
-
-int cxd2820r_read_ucblocks_t(struct dvb_frontend *fe, u32 *ucblocks);
-
-int cxd2820r_init_t(struct dvb_frontend *fe);
-
-int cxd2820r_sleep_t(struct dvb_frontend *fe);
-
-int cxd2820r_get_tune_settings_t(struct dvb_frontend *fe,
-	struct dvb_frontend_tune_settings *s);
-
-/* cxd2820r_t2.c */
-
-int cxd2820r_get_frontend_t2(struct dvb_frontend *fe);
-
-int cxd2820r_set_frontend_t2(struct dvb_frontend *fe);
-
-int cxd2820r_read_status_t2(struct dvb_frontend *fe, fe_status_t *status);
-
-int cxd2820r_read_ber_t2(struct dvb_frontend *fe, u32 *ber);
-
-int cxd2820r_read_signal_strength_t2(struct dvb_frontend *fe, u16 *strength);
-
-int cxd2820r_read_snr_t2(struct dvb_frontend *fe, u16 *snr);
-
-int cxd2820r_read_ucblocks_t2(struct dvb_frontend *fe, u32 *ucblocks);
-
-int cxd2820r_init_t2(struct dvb_frontend *fe);
-
-int cxd2820r_sleep_t2(struct dvb_frontend *fe);
-
-int cxd2820r_get_tune_settings_t2(struct dvb_frontend *fe,
-	struct dvb_frontend_tune_settings *s);
-
-#endif /* CXD2820R_PRIV_H */
diff --git a/drivers/media/dvb/frontends/cxd2820r_t.c b/drivers/media/dvb/frontends/cxd2820r_t.c
deleted file mode 100644
index 1a02623..0000000
--- a/drivers/media/dvb/frontends/cxd2820r_t.c
+++ /dev/null
@@ -1,453 +0,0 @@
-/*
- * Sony CXD2820R demodulator driver
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-
-#include "cxd2820r_priv.h"
-
-int cxd2820r_set_frontend_t(struct dvb_frontend *fe)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	int ret, i, bw_i;
-	u32 if_freq, if_ctl;
-	u64 num;
-	u8 buf[3], bw_param;
-	u8 bw_params1[][5] = {
-		{ 0x17, 0xea, 0xaa, 0xaa, 0xaa }, /* 6 MHz */
-		{ 0x14, 0x80, 0x00, 0x00, 0x00 }, /* 7 MHz */
-		{ 0x11, 0xf0, 0x00, 0x00, 0x00 }, /* 8 MHz */
-	};
-	u8 bw_params2[][2] = {
-		{ 0x1f, 0xdc }, /* 6 MHz */
-		{ 0x12, 0xf8 }, /* 7 MHz */
-		{ 0x01, 0xe0 }, /* 8 MHz */
-	};
-	struct reg_val_mask tab[] = {
-		{ 0x00080, 0x00, 0xff },
-		{ 0x00081, 0x03, 0xff },
-		{ 0x00085, 0x07, 0xff },
-		{ 0x00088, 0x01, 0xff },
-
-		{ 0x00070, priv->cfg.ts_mode, 0xff },
-		{ 0x000cb, priv->cfg.if_agc_polarity << 6, 0x40 },
-		{ 0x000a5, 0x00, 0x01 },
-		{ 0x00082, 0x20, 0x60 },
-		{ 0x000c2, 0xc3, 0xff },
-		{ 0x0016a, 0x50, 0xff },
-		{ 0x00427, 0x41, 0xff },
-	};
-
-	dbg("%s: RF=%d BW=%d", __func__, c->frequency, c->bandwidth_hz);
-
-	switch (c->bandwidth_hz) {
-	case 6000000:
-		bw_i = 0;
-		bw_param = 2;
-		break;
-	case 7000000:
-		bw_i = 1;
-		bw_param = 1;
-		break;
-	case 8000000:
-		bw_i = 2;
-		bw_param = 0;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/* update GPIOs */
-	ret = cxd2820r_gpio(fe);
-	if (ret)
-		goto error;
-
-	/* program tuner */
-	if (fe->ops.tuner_ops.set_params)
-		fe->ops.tuner_ops.set_params(fe);
-
-	if (priv->delivery_system != SYS_DVBT) {
-		for (i = 0; i < ARRAY_SIZE(tab); i++) {
-			ret = cxd2820r_wr_reg_mask(priv, tab[i].reg,
-				tab[i].val, tab[i].mask);
-			if (ret)
-				goto error;
-		}
-	}
-
-	priv->delivery_system = SYS_DVBT;
-	priv->ber_running = 0; /* tune stops BER counter */
-
-	/* program IF frequency */
-	if (fe->ops.tuner_ops.get_if_frequency) {
-		ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_freq);
-		if (ret)
-			goto error;
-	} else
-		if_freq = 0;
-
-	dbg("%s: if_freq=%d", __func__, if_freq);
-
-	num = if_freq / 1000; /* Hz => kHz */
-	num *= 0x1000000;
-	if_ctl = cxd2820r_div_u64_round_closest(num, 41000);
-	buf[0] = ((if_ctl >> 16) & 0xff);
-	buf[1] = ((if_ctl >>  8) & 0xff);
-	buf[2] = ((if_ctl >>  0) & 0xff);
-
-	ret = cxd2820r_wr_regs(priv, 0x000b6, buf, 3);
-	if (ret)
-		goto error;
-
-	ret = cxd2820r_wr_regs(priv, 0x0009f, bw_params1[bw_i], 5);
-	if (ret)
-		goto error;
-
-	ret = cxd2820r_wr_reg_mask(priv, 0x000d7, bw_param << 6, 0xc0);
-	if (ret)
-		goto error;
-
-	ret = cxd2820r_wr_regs(priv, 0x000d9, bw_params2[bw_i], 2);
-	if (ret)
-		goto error;
-
-	ret = cxd2820r_wr_reg(priv, 0x000ff, 0x08);
-	if (ret)
-		goto error;
-
-	ret = cxd2820r_wr_reg(priv, 0x000fe, 0x01);
-	if (ret)
-		goto error;
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_get_frontend_t(struct dvb_frontend *fe)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	int ret;
-	u8 buf[2];
-
-	ret = cxd2820r_rd_regs(priv, 0x0002f, buf, sizeof(buf));
-	if (ret)
-		goto error;
-
-	switch ((buf[0] >> 6) & 0x03) {
-	case 0:
-		c->modulation = QPSK;
-		break;
-	case 1:
-		c->modulation = QAM_16;
-		break;
-	case 2:
-		c->modulation = QAM_64;
-		break;
-	}
-
-	switch ((buf[1] >> 1) & 0x03) {
-	case 0:
-		c->transmission_mode = TRANSMISSION_MODE_2K;
-		break;
-	case 1:
-		c->transmission_mode = TRANSMISSION_MODE_8K;
-		break;
-	}
-
-	switch ((buf[1] >> 3) & 0x03) {
-	case 0:
-		c->guard_interval = GUARD_INTERVAL_1_32;
-		break;
-	case 1:
-		c->guard_interval = GUARD_INTERVAL_1_16;
-		break;
-	case 2:
-		c->guard_interval = GUARD_INTERVAL_1_8;
-		break;
-	case 3:
-		c->guard_interval = GUARD_INTERVAL_1_4;
-		break;
-	}
-
-	switch ((buf[0] >> 3) & 0x07) {
-	case 0:
-		c->hierarchy = HIERARCHY_NONE;
-		break;
-	case 1:
-		c->hierarchy = HIERARCHY_1;
-		break;
-	case 2:
-		c->hierarchy = HIERARCHY_2;
-		break;
-	case 3:
-		c->hierarchy = HIERARCHY_4;
-		break;
-	}
-
-	switch ((buf[0] >> 0) & 0x07) {
-	case 0:
-		c->code_rate_HP = FEC_1_2;
-		break;
-	case 1:
-		c->code_rate_HP = FEC_2_3;
-		break;
-	case 2:
-		c->code_rate_HP = FEC_3_4;
-		break;
-	case 3:
-		c->code_rate_HP = FEC_5_6;
-		break;
-	case 4:
-		c->code_rate_HP = FEC_7_8;
-		break;
-	}
-
-	switch ((buf[1] >> 5) & 0x07) {
-	case 0:
-		c->code_rate_LP = FEC_1_2;
-		break;
-	case 1:
-		c->code_rate_LP = FEC_2_3;
-		break;
-	case 2:
-		c->code_rate_LP = FEC_3_4;
-		break;
-	case 3:
-		c->code_rate_LP = FEC_5_6;
-		break;
-	case 4:
-		c->code_rate_LP = FEC_7_8;
-		break;
-	}
-
-	ret = cxd2820r_rd_reg(priv, 0x007c6, &buf[0]);
-	if (ret)
-		goto error;
-
-	switch ((buf[0] >> 0) & 0x01) {
-	case 0:
-		c->inversion = INVERSION_OFF;
-		break;
-	case 1:
-		c->inversion = INVERSION_ON;
-		break;
-	}
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_read_ber_t(struct dvb_frontend *fe, u32 *ber)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	int ret;
-	u8 buf[3], start_ber = 0;
-	*ber = 0;
-
-	if (priv->ber_running) {
-		ret = cxd2820r_rd_regs(priv, 0x00076, buf, sizeof(buf));
-		if (ret)
-			goto error;
-
-		if ((buf[2] >> 7) & 0x01 || (buf[2] >> 4) & 0x01) {
-			*ber = (buf[2] & 0x0f) << 16 | buf[1] << 8 | buf[0];
-			start_ber = 1;
-		}
-	} else {
-		priv->ber_running = 1;
-		start_ber = 1;
-	}
-
-	if (start_ber) {
-		/* (re)start BER */
-		ret = cxd2820r_wr_reg(priv, 0x00079, 0x01);
-		if (ret)
-			goto error;
-	}
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_read_signal_strength_t(struct dvb_frontend *fe,
-	u16 *strength)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	int ret;
-	u8 buf[2];
-	u16 tmp;
-
-	ret = cxd2820r_rd_regs(priv, 0x00026, buf, sizeof(buf));
-	if (ret)
-		goto error;
-
-	tmp = (buf[0] & 0x0f) << 8 | buf[1];
-	tmp = ~tmp & 0x0fff;
-
-	/* scale value to 0x0000-0xffff from 0x0000-0x0fff */
-	*strength = tmp * 0xffff / 0x0fff;
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_read_snr_t(struct dvb_frontend *fe, u16 *snr)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	int ret;
-	u8 buf[2];
-	u16 tmp;
-	/* report SNR in dB * 10 */
-
-	ret = cxd2820r_rd_regs(priv, 0x00028, buf, sizeof(buf));
-	if (ret)
-		goto error;
-
-	tmp = (buf[0] & 0x1f) << 8 | buf[1];
-	#define CXD2820R_LOG10_8_24 15151336 /* log10(8) << 24 */
-	if (tmp)
-		*snr = (intlog10(tmp) - CXD2820R_LOG10_8_24) / ((1 << 24)
-			/ 100);
-	else
-		*snr = 0;
-
-	dbg("%s: dBx10=%d val=%04x", __func__, *snr, tmp);
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_read_ucblocks_t(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	*ucblocks = 0;
-	/* no way to read ? */
-	return 0;
-}
-
-int cxd2820r_read_status_t(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	int ret;
-	u8 buf[4];
-	*status = 0;
-
-	ret = cxd2820r_rd_reg(priv, 0x00010, &buf[0]);
-	if (ret)
-		goto error;
-
-	if ((buf[0] & 0x07) == 6) {
-		ret = cxd2820r_rd_reg(priv, 0x00073, &buf[1]);
-		if (ret)
-			goto error;
-
-		if (((buf[1] >> 3) & 0x01) == 1) {
-			*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
-				FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
-		} else {
-			*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
-				FE_HAS_VITERBI | FE_HAS_SYNC;
-		}
-	} else {
-		ret = cxd2820r_rd_reg(priv, 0x00014, &buf[2]);
-		if (ret)
-			goto error;
-
-		if ((buf[2] & 0x0f) >= 4) {
-			ret = cxd2820r_rd_reg(priv, 0x00a14, &buf[3]);
-			if (ret)
-				goto error;
-
-			if (((buf[3] >> 4) & 0x01) == 1)
-				*status |= FE_HAS_SIGNAL;
-		}
-	}
-
-	dbg("%s: lock=%02x %02x %02x %02x", __func__,
-		buf[0], buf[1], buf[2], buf[3]);
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_init_t(struct dvb_frontend *fe)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	int ret;
-
-	ret = cxd2820r_wr_reg(priv, 0x00085, 0x07);
-	if (ret)
-		goto error;
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_sleep_t(struct dvb_frontend *fe)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	int ret, i;
-	struct reg_val_mask tab[] = {
-		{ 0x000ff, 0x1f, 0xff },
-		{ 0x00085, 0x00, 0xff },
-		{ 0x00088, 0x01, 0xff },
-		{ 0x00081, 0x00, 0xff },
-		{ 0x00080, 0x00, 0xff },
-	};
-
-	dbg("%s", __func__);
-
-	priv->delivery_system = SYS_UNDEFINED;
-
-	for (i = 0; i < ARRAY_SIZE(tab); i++) {
-		ret = cxd2820r_wr_reg_mask(priv, tab[i].reg, tab[i].val,
-			tab[i].mask);
-		if (ret)
-			goto error;
-	}
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_get_tune_settings_t(struct dvb_frontend *fe,
-	struct dvb_frontend_tune_settings *s)
-{
-	s->min_delay_ms = 500;
-	s->step_size = fe->ops.info.frequency_stepsize * 2;
-	s->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1;
-
-	return 0;
-}
diff --git a/drivers/media/dvb/frontends/cxd2820r_t2.c b/drivers/media/dvb/frontends/cxd2820r_t2.c
deleted file mode 100644
index 3a5759e..0000000
--- a/drivers/media/dvb/frontends/cxd2820r_t2.c
+++ /dev/null
@@ -1,426 +0,0 @@
-/*
- * Sony CXD2820R demodulator driver
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-
-#include "cxd2820r_priv.h"
-
-int cxd2820r_set_frontend_t2(struct dvb_frontend *fe)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	int ret, i, bw_i;
-	u32 if_freq, if_ctl;
-	u64 num;
-	u8 buf[3], bw_param;
-	u8 bw_params1[][5] = {
-		{ 0x1c, 0xb3, 0x33, 0x33, 0x33 }, /* 5 MHz */
-		{ 0x17, 0xea, 0xaa, 0xaa, 0xaa }, /* 6 MHz */
-		{ 0x14, 0x80, 0x00, 0x00, 0x00 }, /* 7 MHz */
-		{ 0x11, 0xf0, 0x00, 0x00, 0x00 }, /* 8 MHz */
-	};
-	struct reg_val_mask tab[] = {
-		{ 0x00080, 0x02, 0xff },
-		{ 0x00081, 0x20, 0xff },
-		{ 0x00085, 0x07, 0xff },
-		{ 0x00088, 0x01, 0xff },
-		{ 0x02069, 0x01, 0xff },
-
-		{ 0x0207f, 0x2a, 0xff },
-		{ 0x02082, 0x0a, 0xff },
-		{ 0x02083, 0x0a, 0xff },
-		{ 0x020cb, priv->cfg.if_agc_polarity << 6, 0x40 },
-		{ 0x02070, priv->cfg.ts_mode, 0xff },
-		{ 0x020b5, priv->cfg.spec_inv << 4, 0x10 },
-		{ 0x02567, 0x07, 0x0f },
-		{ 0x02569, 0x03, 0x03 },
-		{ 0x02595, 0x1a, 0xff },
-		{ 0x02596, 0x50, 0xff },
-		{ 0x02a8c, 0x00, 0xff },
-		{ 0x02a8d, 0x34, 0xff },
-		{ 0x02a45, 0x06, 0x07 },
-		{ 0x03f10, 0x0d, 0xff },
-		{ 0x03f11, 0x02, 0xff },
-		{ 0x03f12, 0x01, 0xff },
-		{ 0x03f23, 0x2c, 0xff },
-		{ 0x03f51, 0x13, 0xff },
-		{ 0x03f52, 0x01, 0xff },
-		{ 0x03f53, 0x00, 0xff },
-		{ 0x027e6, 0x14, 0xff },
-		{ 0x02786, 0x02, 0x07 },
-		{ 0x02787, 0x40, 0xe0 },
-		{ 0x027ef, 0x10, 0x18 },
-	};
-
-	dbg("%s: RF=%d BW=%d", __func__, c->frequency, c->bandwidth_hz);
-
-	switch (c->bandwidth_hz) {
-	case 5000000:
-		bw_i = 0;
-		bw_param = 3;
-		break;
-	case 6000000:
-		bw_i = 1;
-		bw_param = 2;
-		break;
-	case 7000000:
-		bw_i = 2;
-		bw_param = 1;
-		break;
-	case 8000000:
-		bw_i = 3;
-		bw_param = 0;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/* update GPIOs */
-	ret = cxd2820r_gpio(fe);
-	if (ret)
-		goto error;
-
-	/* program tuner */
-	if (fe->ops.tuner_ops.set_params)
-		fe->ops.tuner_ops.set_params(fe);
-
-	if (priv->delivery_system != SYS_DVBT2) {
-		for (i = 0; i < ARRAY_SIZE(tab); i++) {
-			ret = cxd2820r_wr_reg_mask(priv, tab[i].reg,
-				tab[i].val, tab[i].mask);
-			if (ret)
-				goto error;
-		}
-	}
-
-	priv->delivery_system = SYS_DVBT2;
-
-	/* program IF frequency */
-	if (fe->ops.tuner_ops.get_if_frequency) {
-		ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_freq);
-		if (ret)
-			goto error;
-	} else
-		if_freq = 0;
-
-	dbg("%s: if_freq=%d", __func__, if_freq);
-
-	num = if_freq / 1000; /* Hz => kHz */
-	num *= 0x1000000;
-	if_ctl = cxd2820r_div_u64_round_closest(num, 41000);
-	buf[0] = ((if_ctl >> 16) & 0xff);
-	buf[1] = ((if_ctl >>  8) & 0xff);
-	buf[2] = ((if_ctl >>  0) & 0xff);
-
-	ret = cxd2820r_wr_regs(priv, 0x020b6, buf, 3);
-	if (ret)
-		goto error;
-
-	ret = cxd2820r_wr_regs(priv, 0x0209f, bw_params1[bw_i], 5);
-	if (ret)
-		goto error;
-
-	ret = cxd2820r_wr_reg_mask(priv, 0x020d7, bw_param << 6, 0xc0);
-	if (ret)
-		goto error;
-
-	ret = cxd2820r_wr_reg(priv, 0x000ff, 0x08);
-	if (ret)
-		goto error;
-
-	ret = cxd2820r_wr_reg(priv, 0x000fe, 0x01);
-	if (ret)
-		goto error;
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-
-}
-
-int cxd2820r_get_frontend_t2(struct dvb_frontend *fe)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	int ret;
-	u8 buf[2];
-
-	ret = cxd2820r_rd_regs(priv, 0x0205c, buf, 2);
-	if (ret)
-		goto error;
-
-	switch ((buf[0] >> 0) & 0x07) {
-	case 0:
-		c->transmission_mode = TRANSMISSION_MODE_2K;
-		break;
-	case 1:
-		c->transmission_mode = TRANSMISSION_MODE_8K;
-		break;
-	case 2:
-		c->transmission_mode = TRANSMISSION_MODE_4K;
-		break;
-	case 3:
-		c->transmission_mode = TRANSMISSION_MODE_1K;
-		break;
-	case 4:
-		c->transmission_mode = TRANSMISSION_MODE_16K;
-		break;
-	case 5:
-		c->transmission_mode = TRANSMISSION_MODE_32K;
-		break;
-	}
-
-	switch ((buf[1] >> 4) & 0x07) {
-	case 0:
-		c->guard_interval = GUARD_INTERVAL_1_32;
-		break;
-	case 1:
-		c->guard_interval = GUARD_INTERVAL_1_16;
-		break;
-	case 2:
-		c->guard_interval = GUARD_INTERVAL_1_8;
-		break;
-	case 3:
-		c->guard_interval = GUARD_INTERVAL_1_4;
-		break;
-	case 4:
-		c->guard_interval = GUARD_INTERVAL_1_128;
-		break;
-	case 5:
-		c->guard_interval = GUARD_INTERVAL_19_128;
-		break;
-	case 6:
-		c->guard_interval = GUARD_INTERVAL_19_256;
-		break;
-	}
-
-	ret = cxd2820r_rd_regs(priv, 0x0225b, buf, 2);
-	if (ret)
-		goto error;
-
-	switch ((buf[0] >> 0) & 0x07) {
-	case 0:
-		c->fec_inner = FEC_1_2;
-		break;
-	case 1:
-		c->fec_inner = FEC_3_5;
-		break;
-	case 2:
-		c->fec_inner = FEC_2_3;
-		break;
-	case 3:
-		c->fec_inner = FEC_3_4;
-		break;
-	case 4:
-		c->fec_inner = FEC_4_5;
-		break;
-	case 5:
-		c->fec_inner = FEC_5_6;
-		break;
-	}
-
-	switch ((buf[1] >> 0) & 0x07) {
-	case 0:
-		c->modulation = QPSK;
-		break;
-	case 1:
-		c->modulation = QAM_16;
-		break;
-	case 2:
-		c->modulation = QAM_64;
-		break;
-	case 3:
-		c->modulation = QAM_256;
-		break;
-	}
-
-	ret = cxd2820r_rd_reg(priv, 0x020b5, &buf[0]);
-	if (ret)
-		goto error;
-
-	switch ((buf[0] >> 4) & 0x01) {
-	case 0:
-		c->inversion = INVERSION_OFF;
-		break;
-	case 1:
-		c->inversion = INVERSION_ON;
-		break;
-	}
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_read_status_t2(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	int ret;
-	u8 buf[1];
-	*status = 0;
-
-	ret = cxd2820r_rd_reg(priv, 0x02010 , &buf[0]);
-	if (ret)
-		goto error;
-
-	if ((buf[0] & 0x07) == 6) {
-		if (((buf[0] >> 5) & 0x01) == 1) {
-			*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
-				FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
-		} else {
-			*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
-				FE_HAS_VITERBI | FE_HAS_SYNC;
-		}
-	}
-
-	dbg("%s: lock=%02x", __func__, buf[0]);
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_read_ber_t2(struct dvb_frontend *fe, u32 *ber)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	int ret;
-	u8 buf[4];
-	unsigned int errbits;
-	*ber = 0;
-	/* FIXME: correct calculation */
-
-	ret = cxd2820r_rd_regs(priv, 0x02039, buf, sizeof(buf));
-	if (ret)
-		goto error;
-
-	if ((buf[0] >> 4) & 0x01) {
-		errbits = (buf[0] & 0x0f) << 24 | buf[1] << 16 |
-			buf[2] << 8 | buf[3];
-
-		if (errbits)
-			*ber = errbits * 64 / 16588800;
-	}
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_read_signal_strength_t2(struct dvb_frontend *fe,
-	u16 *strength)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	int ret;
-	u8 buf[2];
-	u16 tmp;
-
-	ret = cxd2820r_rd_regs(priv, 0x02026, buf, sizeof(buf));
-	if (ret)
-		goto error;
-
-	tmp = (buf[0] & 0x0f) << 8 | buf[1];
-	tmp = ~tmp & 0x0fff;
-
-	/* scale value to 0x0000-0xffff from 0x0000-0x0fff */
-	*strength = tmp * 0xffff / 0x0fff;
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_read_snr_t2(struct dvb_frontend *fe, u16 *snr)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	int ret;
-	u8 buf[2];
-	u16 tmp;
-	/* report SNR in dB * 10 */
-
-	ret = cxd2820r_rd_regs(priv, 0x02028, buf, sizeof(buf));
-	if (ret)
-		goto error;
-
-	tmp = (buf[0] & 0x0f) << 8 | buf[1];
-	#define CXD2820R_LOG10_8_24 15151336 /* log10(8) << 24 */
-	if (tmp)
-		*snr = (intlog10(tmp) - CXD2820R_LOG10_8_24) / ((1 << 24)
-			/ 100);
-	else
-		*snr = 0;
-
-	dbg("%s: dBx10=%d val=%04x", __func__, *snr, tmp);
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_read_ucblocks_t2(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	*ucblocks = 0;
-	/* no way to read ? */
-	return 0;
-}
-
-int cxd2820r_sleep_t2(struct dvb_frontend *fe)
-{
-	struct cxd2820r_priv *priv = fe->demodulator_priv;
-	int ret, i;
-	struct reg_val_mask tab[] = {
-		{ 0x000ff, 0x1f, 0xff },
-		{ 0x00085, 0x00, 0xff },
-		{ 0x00088, 0x01, 0xff },
-		{ 0x02069, 0x00, 0xff },
-		{ 0x00081, 0x00, 0xff },
-		{ 0x00080, 0x00, 0xff },
-	};
-
-	dbg("%s", __func__);
-
-	for (i = 0; i < ARRAY_SIZE(tab); i++) {
-		ret = cxd2820r_wr_reg_mask(priv, tab[i].reg, tab[i].val,
-			tab[i].mask);
-		if (ret)
-			goto error;
-	}
-
-	priv->delivery_system = SYS_UNDEFINED;
-
-	return ret;
-error:
-	dbg("%s: failed:%d", __func__, ret);
-	return ret;
-}
-
-int cxd2820r_get_tune_settings_t2(struct dvb_frontend *fe,
-	struct dvb_frontend_tune_settings *s)
-{
-	s->min_delay_ms = 1500;
-	s->step_size = fe->ops.info.frequency_stepsize * 2;
-	s->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1;
-
-	return 0;
-}
diff --git a/drivers/media/dvb/frontends/dib0070.c b/drivers/media/dvb/frontends/dib0070.c
deleted file mode 100644
index 3b024bf..0000000
--- a/drivers/media/dvb/frontends/dib0070.c
+++ /dev/null
@@ -1,780 +0,0 @@
-/*
- * Linux-DVB Driver for DiBcom's DiB0070 base-band RF Tuner.
- *
- * Copyright (C) 2005-9 DiBcom (http://www.dibcom.fr/)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * This code is more or less generated from another driver, please
- * excuse some codingstyle oddities.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-
-#include "dvb_frontend.h"
-
-#include "dib0070.h"
-#include "dibx000_common.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
-
-#define dprintk(args...) do { \
-	if (debug) { \
-		printk(KERN_DEBUG "DiB0070: "); \
-		printk(args); \
-		printk("\n"); \
-	} \
-} while (0)
-
-#define DIB0070_P1D  0x00
-#define DIB0070_P1F  0x01
-#define DIB0070_P1G  0x03
-#define DIB0070S_P1A 0x02
-
-struct dib0070_state {
-	struct i2c_adapter *i2c;
-	struct dvb_frontend *fe;
-	const struct dib0070_config *cfg;
-	u16 wbd_ff_offset;
-	u8 revision;
-
-    enum frontend_tune_state tune_state;
-    u32 current_rf;
-
-    /* for the captrim binary search */
-	s8 step;
-	u16 adc_diff;
-
-	s8 captrim;
-	s8 fcaptrim;
-	u16 lo4;
-
-	const struct dib0070_tuning *current_tune_table_index;
-	const struct dib0070_lna_match *lna_match;
-
-    u8  wbd_gain_current;
-	u16 wbd_offset_3_3[2];
-
-	/* for the I2C transfer */
-	struct i2c_msg msg[2];
-	u8 i2c_write_buffer[3];
-	u8 i2c_read_buffer[2];
-	struct mutex i2c_buffer_lock;
-};
-
-static u16 dib0070_read_reg(struct dib0070_state *state, u8 reg)
-{
-	u16 ret;
-
-	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
-		return 0;
-	}
-
-	state->i2c_write_buffer[0] = reg;
-
-	memset(state->msg, 0, 2 * sizeof(struct i2c_msg));
-	state->msg[0].addr = state->cfg->i2c_address;
-	state->msg[0].flags = 0;
-	state->msg[0].buf = state->i2c_write_buffer;
-	state->msg[0].len = 1;
-	state->msg[1].addr = state->cfg->i2c_address;
-	state->msg[1].flags = I2C_M_RD;
-	state->msg[1].buf = state->i2c_read_buffer;
-	state->msg[1].len = 2;
-
-	if (i2c_transfer(state->i2c, state->msg, 2) != 2) {
-		printk(KERN_WARNING "DiB0070 I2C read failed\n");
-		ret = 0;
-	} else
-		ret = (state->i2c_read_buffer[0] << 8)
-			| state->i2c_read_buffer[1];
-
-	mutex_unlock(&state->i2c_buffer_lock);
-	return ret;
-}
-
-static int dib0070_write_reg(struct dib0070_state *state, u8 reg, u16 val)
-{
-	int ret;
-
-	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
-		return -EINVAL;
-	}
-	state->i2c_write_buffer[0] = reg;
-	state->i2c_write_buffer[1] = val >> 8;
-	state->i2c_write_buffer[2] = val & 0xff;
-
-	memset(state->msg, 0, sizeof(struct i2c_msg));
-	state->msg[0].addr = state->cfg->i2c_address;
-	state->msg[0].flags = 0;
-	state->msg[0].buf = state->i2c_write_buffer;
-	state->msg[0].len = 3;
-
-	if (i2c_transfer(state->i2c, state->msg, 1) != 1) {
-		printk(KERN_WARNING "DiB0070 I2C write failed\n");
-		ret = -EREMOTEIO;
-	} else
-		ret = 0;
-
-	mutex_unlock(&state->i2c_buffer_lock);
-	return ret;
-}
-
-#define HARD_RESET(state) do { \
-    state->cfg->sleep(state->fe, 0); \
-    if (state->cfg->reset) { \
-	state->cfg->reset(state->fe,1); msleep(10); \
-	state->cfg->reset(state->fe,0); msleep(10); \
-    } \
-} while (0)
-
-static int dib0070_set_bandwidth(struct dvb_frontend *fe)
-{
-    struct dib0070_state *state = fe->tuner_priv;
-    u16 tmp = dib0070_read_reg(state, 0x02) & 0x3fff;
-
-    if (state->fe->dtv_property_cache.bandwidth_hz/1000 > 7000)
-	tmp |= (0 << 14);
-    else if (state->fe->dtv_property_cache.bandwidth_hz/1000 > 6000)
-	tmp |= (1 << 14);
-    else if (state->fe->dtv_property_cache.bandwidth_hz/1000 > 5000)
-	tmp |= (2 << 14);
-    else
-	tmp |= (3 << 14);
-
-    dib0070_write_reg(state, 0x02, tmp);
-
-    /* sharpen the BB filter in ISDB-T to have higher immunity to adjacent channels */
-    if (state->fe->dtv_property_cache.delivery_system == SYS_ISDBT) {
-	u16 value = dib0070_read_reg(state, 0x17);
-
-	dib0070_write_reg(state, 0x17, value & 0xfffc);
-	tmp = dib0070_read_reg(state, 0x01) & 0x01ff;
-	dib0070_write_reg(state, 0x01, tmp | (60 << 9));
-
-	dib0070_write_reg(state, 0x17, value);
-    }
-	return 0;
-}
-
-static int dib0070_captrim(struct dib0070_state *state, enum frontend_tune_state *tune_state)
-{
-	int8_t step_sign;
-	u16 adc;
-	int ret = 0;
-
-	if (*tune_state == CT_TUNER_STEP_0) {
-
-		dib0070_write_reg(state, 0x0f, 0xed10);
-		dib0070_write_reg(state, 0x17,    0x0034);
-
-		dib0070_write_reg(state, 0x18, 0x0032);
-		state->step = state->captrim = state->fcaptrim = 64;
-		state->adc_diff = 3000;
-		ret = 20;
-
-	*tune_state = CT_TUNER_STEP_1;
-	} else if (*tune_state == CT_TUNER_STEP_1) {
-		state->step /= 2;
-		dib0070_write_reg(state, 0x14, state->lo4 | state->captrim);
-		ret = 15;
-
-		*tune_state = CT_TUNER_STEP_2;
-	} else if (*tune_state == CT_TUNER_STEP_2) {
-
-		adc = dib0070_read_reg(state, 0x19);
-
-		dprintk("CAPTRIM=%hd; ADC = %hd (ADC) & %dmV", state->captrim, adc, (u32) adc*(u32)1800/(u32)1024);
-
-		if (adc >= 400) {
-			adc -= 400;
-			step_sign = -1;
-		} else {
-			adc = 400 - adc;
-			step_sign = 1;
-		}
-
-		if (adc < state->adc_diff) {
-			dprintk("CAPTRIM=%hd is closer to target (%hd/%hd)", state->captrim, adc, state->adc_diff);
-			state->adc_diff = adc;
-			state->fcaptrim = state->captrim;
-
-
-
-		}
-		state->captrim += (step_sign * state->step);
-
-		if (state->step >= 1)
-			*tune_state = CT_TUNER_STEP_1;
-		else
-			*tune_state = CT_TUNER_STEP_3;
-
-	} else if (*tune_state == CT_TUNER_STEP_3) {
-		dib0070_write_reg(state, 0x14, state->lo4 | state->fcaptrim);
-		dib0070_write_reg(state, 0x18, 0x07ff);
-		*tune_state = CT_TUNER_STEP_4;
-	}
-
-	return ret;
-}
-
-static int dib0070_set_ctrl_lo5(struct dvb_frontend *fe, u8 vco_bias_trim, u8 hf_div_trim, u8 cp_current, u8 third_order_filt)
-{
-	struct dib0070_state *state = fe->tuner_priv;
-    u16 lo5 = (third_order_filt << 14) | (0 << 13) | (1 << 12) | (3 << 9) | (cp_current << 6) | (hf_div_trim << 3) | (vco_bias_trim << 0);
-	dprintk("CTRL_LO5: 0x%x", lo5);
-	return dib0070_write_reg(state, 0x15, lo5);
-}
-
-void dib0070_ctrl_agc_filter(struct dvb_frontend *fe, u8 open)
-{
-	struct dib0070_state *state = fe->tuner_priv;
-
-	if (open) {
-		dib0070_write_reg(state, 0x1b, 0xff00);
-		dib0070_write_reg(state, 0x1a, 0x0000);
-	} else {
-		dib0070_write_reg(state, 0x1b, 0x4112);
-	if (state->cfg->vga_filter != 0) {
-		dib0070_write_reg(state, 0x1a, state->cfg->vga_filter);
-		dprintk("vga filter register is set to %x", state->cfg->vga_filter);
-	} else
-		dib0070_write_reg(state, 0x1a, 0x0009);
-	}
-}
-
-EXPORT_SYMBOL(dib0070_ctrl_agc_filter);
-struct dib0070_tuning {
-    u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */
-    u8 switch_trim;
-    u8 vco_band;
-    u8 hfdiv;
-    u8 vco_multi;
-    u8 presc;
-    u8 wbdmux;
-    u16 tuner_enable;
-};
-
-struct dib0070_lna_match {
-    u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */
-    u8 lna_band;
-};
-
-static const struct dib0070_tuning dib0070s_tuning_table[] = {
-    {     570000, 2, 1, 3, 6, 6, 2, 0x4000 | 0x0800 }, /* UHF */
-    {     700000, 2, 0, 2, 4, 2, 2, 0x4000 | 0x0800 },
-    {     863999, 2, 1, 2, 4, 2, 2, 0x4000 | 0x0800 },
-    {    1500000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400 }, /* LBAND */
-    {    1600000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400 },
-    {    2000000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400 },
-    { 0xffffffff, 0, 0, 8, 1, 2, 1, 0x8000 | 0x1000 }, /* SBAND */
-};
-
-static const struct dib0070_tuning dib0070_tuning_table[] = {
-    {     115000, 1, 0, 7, 24, 2, 1, 0x8000 | 0x1000 }, /* FM below 92MHz cannot be tuned */
-    {     179500, 1, 0, 3, 16, 2, 1, 0x8000 | 0x1000 }, /* VHF */
-    {     189999, 1, 1, 3, 16, 2, 1, 0x8000 | 0x1000 },
-    {     250000, 1, 0, 6, 12, 2, 1, 0x8000 | 0x1000 },
-    {     569999, 2, 1, 5,  6, 2, 2, 0x4000 | 0x0800 }, /* UHF */
-    {     699999, 2, 0, 1,  4, 2, 2, 0x4000 | 0x0800 },
-    {     863999, 2, 1, 1,  4, 2, 2, 0x4000 | 0x0800 },
-    { 0xffffffff, 0, 1, 0,  2, 2, 4, 0x2000 | 0x0400 }, /* LBAND or everything higher than UHF */
-};
-
-static const struct dib0070_lna_match dib0070_lna_flip_chip[] = {
-    {     180000, 0 }, /* VHF */
-    {     188000, 1 },
-    {     196400, 2 },
-    {     250000, 3 },
-    {     550000, 0 }, /* UHF */
-    {     590000, 1 },
-    {     666000, 3 },
-    {     864000, 5 },
-    {    1500000, 0 }, /* LBAND or everything higher than UHF */
-    {    1600000, 1 },
-    {    2000000, 3 },
-    { 0xffffffff, 7 },
-};
-
-static const struct dib0070_lna_match dib0070_lna[] = {
-    {     180000, 0 }, /* VHF */
-    {     188000, 1 },
-    {     196400, 2 },
-    {     250000, 3 },
-    {     550000, 2 }, /* UHF */
-    {     650000, 3 },
-    {     750000, 5 },
-    {     850000, 6 },
-    {     864000, 7 },
-    {    1500000, 0 }, /* LBAND or everything higher than UHF */
-    {    1600000, 1 },
-    {    2000000, 3 },
-    { 0xffffffff, 7 },
-};
-
-#define LPF	100
-static int dib0070_tune_digital(struct dvb_frontend *fe)
-{
-    struct dib0070_state *state = fe->tuner_priv;
-
-    const struct dib0070_tuning *tune;
-    const struct dib0070_lna_match *lna_match;
-
-    enum frontend_tune_state *tune_state = &state->tune_state;
-    int ret = 10; /* 1ms is the default delay most of the time */
-
-    u8  band = (u8)BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency/1000);
-    u32 freq = fe->dtv_property_cache.frequency/1000 + (band == BAND_VHF ? state->cfg->freq_offset_khz_vhf : state->cfg->freq_offset_khz_uhf);
-
-#ifdef CONFIG_SYS_ISDBT
-    if (state->fe->dtv_property_cache.delivery_system == SYS_ISDBT && state->fe->dtv_property_cache.isdbt_sb_mode == 1)
-		if (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2)
-		     && (state->fe->dtv_property_cache.isdbt_sb_segment_idx == ((state->fe->dtv_property_cache.isdbt_sb_segment_count / 2) + 1)))
-		    || (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2) == 0)
-			&& (state->fe->dtv_property_cache.isdbt_sb_segment_idx == (state->fe->dtv_property_cache.isdbt_sb_segment_count / 2)))
-		    || (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2) == 0)
-			&& (state->fe->dtv_property_cache.isdbt_sb_segment_idx == ((state->fe->dtv_property_cache.isdbt_sb_segment_count / 2) + 1))))
-			freq += 850;
-#endif
-    if (state->current_rf != freq) {
-
-	switch (state->revision) {
-	case DIB0070S_P1A:
-	    tune = dib0070s_tuning_table;
-	    lna_match = dib0070_lna;
-	    break;
-	default:
-	    tune = dib0070_tuning_table;
-	    if (state->cfg->flip_chip)
-		lna_match = dib0070_lna_flip_chip;
-	    else
-		lna_match = dib0070_lna;
-	    break;
-	}
-	while (freq > tune->max_freq) /* find the right one */
-	    tune++;
-	while (freq > lna_match->max_freq) /* find the right one */
-	    lna_match++;
-
-	state->current_tune_table_index = tune;
-	state->lna_match = lna_match;
-    }
-
-    if (*tune_state == CT_TUNER_START) {
-	dprintk("Tuning for Band: %hd (%d kHz)", band, freq);
-	if (state->current_rf != freq) {
-		u8 REFDIV;
-		u32 FBDiv, Rest, FREF, VCOF_kHz;
-		u8 Den;
-
-		state->current_rf = freq;
-		state->lo4 = (state->current_tune_table_index->vco_band << 11) | (state->current_tune_table_index->hfdiv << 7);
-
-
-		dib0070_write_reg(state, 0x17, 0x30);
-
-
-		VCOF_kHz = state->current_tune_table_index->vco_multi * freq * 2;
-
-		switch (band) {
-		case BAND_VHF:
-			REFDIV = (u8) ((state->cfg->clock_khz + 9999) / 10000);
-			break;
-		case BAND_FM:
-			REFDIV = (u8) ((state->cfg->clock_khz) / 1000);
-			break;
-		default:
-			REFDIV = (u8) (state->cfg->clock_khz  / 10000);
-			break;
-		}
-		FREF = state->cfg->clock_khz / REFDIV;
-
-
-
-		switch (state->revision) {
-		case DIB0070S_P1A:
-			FBDiv = (VCOF_kHz / state->current_tune_table_index->presc / FREF);
-			Rest  = (VCOF_kHz / state->current_tune_table_index->presc) - FBDiv * FREF;
-			break;
-
-		case DIB0070_P1G:
-		case DIB0070_P1F:
-		default:
-			FBDiv = (freq / (FREF / 2));
-			Rest  = 2 * freq - FBDiv * FREF;
-			break;
-		}
-
-		if (Rest < LPF)
-			Rest = 0;
-		else if (Rest < 2 * LPF)
-			Rest = 2 * LPF;
-		else if (Rest > (FREF - LPF)) {
-			Rest = 0;
-			FBDiv += 1;
-		} else if (Rest > (FREF - 2 * LPF))
-			Rest = FREF - 2 * LPF;
-		Rest = (Rest * 6528) / (FREF / 10);
-
-		Den = 1;
-		if (Rest > 0) {
-			state->lo4 |= (1 << 14) | (1 << 12);
-			Den = 255;
-		}
-
-
-		dib0070_write_reg(state, 0x11, (u16)FBDiv);
-		dib0070_write_reg(state, 0x12, (Den << 8) | REFDIV);
-		dib0070_write_reg(state, 0x13, (u16) Rest);
-
-		if (state->revision == DIB0070S_P1A) {
-
-			if (band == BAND_SBAND) {
-				dib0070_set_ctrl_lo5(fe, 2, 4, 3, 0);
-				dib0070_write_reg(state, 0x1d, 0xFFFF);
-			} else
-				dib0070_set_ctrl_lo5(fe, 5, 4, 3, 1);
-		}
-
-		dib0070_write_reg(state, 0x20,
-			0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001 | state->current_tune_table_index->tuner_enable);
-
-		dprintk("REFDIV: %hd, FREF: %d", REFDIV, FREF);
-		dprintk("FBDIV: %d, Rest: %d", FBDiv, Rest);
-		dprintk("Num: %hd, Den: %hd, SD: %hd", (u16) Rest, Den, (state->lo4 >> 12) & 0x1);
-		dprintk("HFDIV code: %hd", state->current_tune_table_index->hfdiv);
-		dprintk("VCO = %hd", state->current_tune_table_index->vco_band);
-		dprintk("VCOF: ((%hd*%d) << 1))", state->current_tune_table_index->vco_multi, freq);
-
-		*tune_state = CT_TUNER_STEP_0;
-	} else { /* we are already tuned to this frequency - the configuration is correct  */
-		ret = 50; /* wakeup time */
-		*tune_state = CT_TUNER_STEP_5;
-	}
-    } else if ((*tune_state > CT_TUNER_START) && (*tune_state < CT_TUNER_STEP_4)) {
-
-	ret = dib0070_captrim(state, tune_state);
-
-    } else if (*tune_state == CT_TUNER_STEP_4) {
-	const struct dib0070_wbd_gain_cfg *tmp = state->cfg->wbd_gain;
-	if (tmp != NULL) {
-		while (freq/1000 > tmp->freq) /* find the right one */
-			tmp++;
-		dib0070_write_reg(state, 0x0f,
-			(0 << 15) | (1 << 14) | (3 << 12)
-			| (tmp->wbd_gain_val << 9) | (0 << 8) | (1 << 7)
-			| (state->current_tune_table_index->wbdmux << 0));
-		state->wbd_gain_current = tmp->wbd_gain_val;
-	} else {
-			dib0070_write_reg(state, 0x0f,
-					  (0 << 15) | (1 << 14) | (3 << 12) | (6 << 9) | (0 << 8) | (1 << 7) | (state->current_tune_table_index->
-														wbdmux << 0));
-	    state->wbd_gain_current = 6;
-	}
-
-	dib0070_write_reg(state, 0x06, 0x3fff);
-		dib0070_write_reg(state, 0x07,
-				  (state->current_tune_table_index->switch_trim << 11) | (7 << 8) | (state->lna_match->lna_band << 3) | (3 << 0));
-	dib0070_write_reg(state, 0x08, (state->lna_match->lna_band << 10) | (3 << 7) | (127));
-	dib0070_write_reg(state, 0x0d, 0x0d80);
-
-
-	dib0070_write_reg(state, 0x18,   0x07ff);
-	dib0070_write_reg(state, 0x17, 0x0033);
-
-
-	*tune_state = CT_TUNER_STEP_5;
-    } else if (*tune_state == CT_TUNER_STEP_5) {
-	dib0070_set_bandwidth(fe);
-	*tune_state = CT_TUNER_STOP;
-    } else {
-	ret = FE_CALLBACK_TIME_NEVER; /* tuner finished, time to call again infinite */
-    }
-    return ret;
-}
-
-
-static int dib0070_tune(struct dvb_frontend *fe)
-{
-    struct dib0070_state *state = fe->tuner_priv;
-    uint32_t ret;
-
-    state->tune_state = CT_TUNER_START;
-
-    do {
-	ret = dib0070_tune_digital(fe);
-	if (ret != FE_CALLBACK_TIME_NEVER)
-		msleep(ret/10);
-	else
-	    break;
-    } while (state->tune_state != CT_TUNER_STOP);
-
-    return 0;
-}
-
-static int dib0070_wakeup(struct dvb_frontend *fe)
-{
-	struct dib0070_state *state = fe->tuner_priv;
-	if (state->cfg->sleep)
-		state->cfg->sleep(fe, 0);
-	return 0;
-}
-
-static int dib0070_sleep(struct dvb_frontend *fe)
-{
-	struct dib0070_state *state = fe->tuner_priv;
-	if (state->cfg->sleep)
-		state->cfg->sleep(fe, 1);
-	return 0;
-}
-
-u8 dib0070_get_rf_output(struct dvb_frontend *fe)
-{
-	struct dib0070_state *state = fe->tuner_priv;
-	return (dib0070_read_reg(state, 0x07) >> 11) & 0x3;
-}
-EXPORT_SYMBOL(dib0070_get_rf_output);
-
-int dib0070_set_rf_output(struct dvb_frontend *fe, u8 no)
-{
-	struct dib0070_state *state = fe->tuner_priv;
-	u16 rxrf2 = dib0070_read_reg(state, 0x07) & 0xfe7ff;
-	if (no > 3)
-		no = 3;
-	if (no < 1)
-		no = 1;
-	return dib0070_write_reg(state, 0x07, rxrf2 | (no << 11));
-}
-EXPORT_SYMBOL(dib0070_set_rf_output);
-
-static const u16 dib0070_p1f_defaults[] =
-
-{
-	7, 0x02,
-		0x0008,
-		0x0000,
-		0x0000,
-		0x0000,
-		0x0000,
-		0x0002,
-		0x0100,
-
-	3, 0x0d,
-		0x0d80,
-		0x0001,
-		0x0000,
-
-	4, 0x11,
-		0x0000,
-		0x0103,
-		0x0000,
-		0x0000,
-
-	3, 0x16,
-		0x0004 | 0x0040,
-		0x0030,
-		0x07ff,
-
-	6, 0x1b,
-		0x4112,
-		0xff00,
-		0xc07f,
-		0x0000,
-		0x0180,
-		0x4000 | 0x0800 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001,
-
-	0,
-};
-
-static u16 dib0070_read_wbd_offset(struct dib0070_state *state, u8 gain)
-{
-    u16 tuner_en = dib0070_read_reg(state, 0x20);
-    u16 offset;
-
-    dib0070_write_reg(state, 0x18, 0x07ff);
-    dib0070_write_reg(state, 0x20, 0x0800 | 0x4000 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001);
-    dib0070_write_reg(state, 0x0f, (1 << 14) | (2 << 12) | (gain << 9) | (1 << 8) | (1 << 7) | (0 << 0));
-    msleep(9);
-    offset = dib0070_read_reg(state, 0x19);
-    dib0070_write_reg(state, 0x20, tuner_en);
-    return offset;
-}
-
-static void dib0070_wbd_offset_calibration(struct dib0070_state *state)
-{
-    u8 gain;
-    for (gain = 6; gain < 8; gain++) {
-	state->wbd_offset_3_3[gain - 6] = ((dib0070_read_wbd_offset(state, gain) * 8 * 18 / 33 + 1) / 2);
-	dprintk("Gain: %d, WBDOffset (3.3V) = %hd", gain, state->wbd_offset_3_3[gain-6]);
-    }
-}
-
-u16 dib0070_wbd_offset(struct dvb_frontend *fe)
-{
-    struct dib0070_state *state = fe->tuner_priv;
-    const struct dib0070_wbd_gain_cfg *tmp = state->cfg->wbd_gain;
-    u32 freq = fe->dtv_property_cache.frequency/1000;
-
-    if (tmp != NULL) {
-	while (freq/1000 > tmp->freq) /* find the right one */
-	    tmp++;
-	state->wbd_gain_current = tmp->wbd_gain_val;
-	} else
-	state->wbd_gain_current = 6;
-
-    return state->wbd_offset_3_3[state->wbd_gain_current - 6];
-}
-EXPORT_SYMBOL(dib0070_wbd_offset);
-
-#define pgm_read_word(w) (*w)
-static int dib0070_reset(struct dvb_frontend *fe)
-{
-    struct dib0070_state *state = fe->tuner_priv;
-	u16 l, r, *n;
-
-	HARD_RESET(state);
-
-
-#ifndef FORCE_SBAND_TUNER
-	if ((dib0070_read_reg(state, 0x22) >> 9) & 0x1)
-		state->revision = (dib0070_read_reg(state, 0x1f) >> 8) & 0xff;
-	else
-#else
-#warning forcing SBAND
-#endif
-		state->revision = DIB0070S_P1A;
-
-	/* P1F or not */
-	dprintk("Revision: %x", state->revision);
-
-	if (state->revision == DIB0070_P1D) {
-		dprintk("Error: this driver is not to be used meant for P1D or earlier");
-		return -EINVAL;
-	}
-
-	n = (u16 *) dib0070_p1f_defaults;
-	l = pgm_read_word(n++);
-	while (l) {
-		r = pgm_read_word(n++);
-		do {
-			dib0070_write_reg(state, (u8)r, pgm_read_word(n++));
-			r++;
-		} while (--l);
-		l = pgm_read_word(n++);
-	}
-
-	if (state->cfg->force_crystal_mode != 0)
-		r = state->cfg->force_crystal_mode;
-	else if (state->cfg->clock_khz >= 24000)
-		r = 1;
-	else
-		r = 2;
-
-
-	r |= state->cfg->osc_buffer_state << 3;
-
-	dib0070_write_reg(state, 0x10, r);
-	dib0070_write_reg(state, 0x1f, (1 << 8) | ((state->cfg->clock_pad_drive & 0xf) << 5));
-
-	if (state->cfg->invert_iq) {
-		r = dib0070_read_reg(state, 0x02) & 0xffdf;
-		dib0070_write_reg(state, 0x02, r | (1 << 5));
-	}
-
-    if (state->revision == DIB0070S_P1A)
-	dib0070_set_ctrl_lo5(fe, 2, 4, 3, 0);
-    else
-		dib0070_set_ctrl_lo5(fe, 5, 4, state->cfg->charge_pump, state->cfg->enable_third_order_filter);
-
-	dib0070_write_reg(state, 0x01, (54 << 9) | 0xc8);
-
-    dib0070_wbd_offset_calibration(state);
-
-    return 0;
-}
-
-static int dib0070_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
-    struct dib0070_state *state = fe->tuner_priv;
-
-    *frequency = 1000 * state->current_rf;
-    return 0;
-}
-
-static int dib0070_release(struct dvb_frontend *fe)
-{
-	kfree(fe->tuner_priv);
-	fe->tuner_priv = NULL;
-	return 0;
-}
-
-static const struct dvb_tuner_ops dib0070_ops = {
-	.info = {
-		.name           = "DiBcom DiB0070",
-		.frequency_min  =  45000000,
-		.frequency_max  = 860000000,
-		.frequency_step =      1000,
-	},
-	.release       = dib0070_release,
-
-	.init          = dib0070_wakeup,
-	.sleep         = dib0070_sleep,
-	.set_params    = dib0070_tune,
-
-	.get_frequency = dib0070_get_frequency,
-//      .get_bandwidth = dib0070_get_bandwidth
-};
-
-struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg)
-{
-	struct dib0070_state *state = kzalloc(sizeof(struct dib0070_state), GFP_KERNEL);
-	if (state == NULL)
-		return NULL;
-
-	state->cfg = cfg;
-	state->i2c = i2c;
-	state->fe  = fe;
-	mutex_init(&state->i2c_buffer_lock);
-	fe->tuner_priv = state;
-
-	if (dib0070_reset(fe) != 0)
-		goto free_mem;
-
-	printk(KERN_INFO "DiB0070: successfully identified\n");
-	memcpy(&fe->ops.tuner_ops, &dib0070_ops, sizeof(struct dvb_tuner_ops));
-
-	fe->tuner_priv = state;
-	return fe;
-
-free_mem:
-	kfree(state);
-	fe->tuner_priv = NULL;
-	return NULL;
-}
-EXPORT_SYMBOL(dib0070_attach);
-
-MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
-MODULE_DESCRIPTION("Driver for the DiBcom 0070 base-band RF Tuner");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h
deleted file mode 100644
index 45c31fa..0000000
--- a/drivers/media/dvb/frontends/dib0070.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Linux-DVB Driver for DiBcom's DiB0070 base-band RF Tuner.
- *
- * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/)
- *
- * This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- */
-#ifndef DIB0070_H
-#define DIB0070_H
-
-struct dvb_frontend;
-struct i2c_adapter;
-
-#define DEFAULT_DIB0070_I2C_ADDRESS 0x60
-
-struct dib0070_wbd_gain_cfg {
-	u16 freq;
-	u16 wbd_gain_val;
-};
-
-struct dib0070_config {
-	u8 i2c_address;
-
-	/* tuner pins controlled externally */
-	int (*reset) (struct dvb_frontend *, int);
-	int (*sleep) (struct dvb_frontend *, int);
-
-	/*  offset in kHz */
-	int freq_offset_khz_uhf;
-	int freq_offset_khz_vhf;
-
-	u8 osc_buffer_state;	/* 0= normal, 1= tri-state */
-	u32 clock_khz;
-	u8 clock_pad_drive;	/* (Drive + 1) * 2mA */
-
-	u8 invert_iq;		/* invert Q - in case I or Q is inverted on the board */
-
-	u8 force_crystal_mode;	/* if == 0 -> decision is made in the driver default: <24 -> 2, >=24 -> 1 */
-
-	u8 flip_chip;
-	u8 enable_third_order_filter;
-	u8 charge_pump;
-
-	const struct dib0070_wbd_gain_cfg *wbd_gain;
-
-	u8 vga_filter;
-};
-
-#if defined(CONFIG_DVB_TUNER_DIB0070) || (defined(CONFIG_DVB_TUNER_DIB0070_MODULE) && defined(MODULE))
-extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg);
-extern u16 dib0070_wbd_offset(struct dvb_frontend *);
-extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, u8 open);
-extern u8 dib0070_get_rf_output(struct dvb_frontend *fe);
-extern int dib0070_set_rf_output(struct dvb_frontend *fe, u8 no);
-#else
-static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-static inline u16 dib0070_wbd_offset(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return 0;
-}
-
-static inline void dib0070_ctrl_agc_filter(struct dvb_frontend *fe, u8 open)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-}
-#endif
-
-#endif
diff --git a/drivers/media/dvb/frontends/dib0090.c b/drivers/media/dvb/frontends/dib0090.c
deleted file mode 100644
index d9fe60b..0000000
--- a/drivers/media/dvb/frontends/dib0090.c
+++ /dev/null
@@ -1,2686 +0,0 @@
-/*
- * Linux-DVB Driver for DiBcom's DiB0090 base-band RF Tuner.
- *
- * Copyright (C) 2005-9 DiBcom (http://www.dibcom.fr/)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * This code is more or less generated from another driver, please
- * excuse some codingstyle oddities.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-
-#include "dvb_frontend.h"
-
-#include "dib0090.h"
-#include "dibx000_common.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
-
-#define dprintk(args...) do { \
-	if (debug) { \
-		printk(KERN_DEBUG "DiB0090: "); \
-		printk(args); \
-		printk("\n"); \
-	} \
-} while (0)
-
-#define CONFIG_SYS_DVBT
-#define CONFIG_SYS_ISDBT
-#define CONFIG_BAND_CBAND
-#define CONFIG_BAND_VHF
-#define CONFIG_BAND_UHF
-#define CONFIG_DIB0090_USE_PWM_AGC
-
-#define EN_LNA0      0x8000
-#define EN_LNA1      0x4000
-#define EN_LNA2      0x2000
-#define EN_LNA3      0x1000
-#define EN_MIX0      0x0800
-#define EN_MIX1      0x0400
-#define EN_MIX2      0x0200
-#define EN_MIX3      0x0100
-#define EN_IQADC     0x0040
-#define EN_PLL       0x0020
-#define EN_TX        0x0010
-#define EN_BB        0x0008
-#define EN_LO        0x0004
-#define EN_BIAS      0x0001
-
-#define EN_IQANA     0x0002
-#define EN_DIGCLK    0x0080	/* not in the 0x24 reg, only in 0x1b */
-#define EN_CRYSTAL   0x0002
-
-#define EN_UHF		 0x22E9
-#define EN_VHF		 0x44E9
-#define EN_LBD		 0x11E9
-#define EN_SBD		 0x44E9
-#define EN_CAB		 0x88E9
-
-/* Calibration defines */
-#define      DC_CAL 0x1
-#define     WBD_CAL 0x2
-#define    TEMP_CAL 0x4
-#define CAPTRIM_CAL 0x8
-
-#define KROSUS_PLL_LOCKED   0x800
-#define KROSUS              0x2
-
-/* Use those defines to identify SOC version */
-#define SOC               0x02
-#define SOC_7090_P1G_11R1 0x82
-#define SOC_7090_P1G_21R1 0x8a
-#define SOC_8090_P1G_11R1 0x86
-#define SOC_8090_P1G_21R1 0x8e
-
-/* else use thos ones to check */
-#define P1A_B      0x0
-#define P1C	   0x1
-#define P1D_E_F    0x3
-#define P1G	   0x7
-#define P1G_21R2   0xf
-
-#define MP001 0x1		/* Single 9090/8096 */
-#define MP005 0x4		/* Single Sband */
-#define MP008 0x6		/* Dual diversity VHF-UHF-LBAND */
-#define MP009 0x7		/* Dual diversity 29098 CBAND-UHF-LBAND-SBAND */
-
-#define pgm_read_word(w) (*w)
-
-struct dc_calibration;
-
-struct dib0090_tuning {
-	u32 max_freq;		/* for every frequency less than or equal to that field: this information is correct */
-	u8 switch_trim;
-	u8 lna_tune;
-	u16 lna_bias;
-	u16 v2i;
-	u16 mix;
-	u16 load;
-	u16 tuner_enable;
-};
-
-struct dib0090_pll {
-	u32 max_freq;		/* for every frequency less than or equal to that field: this information is correct */
-	u8 vco_band;
-	u8 hfdiv_code;
-	u8 hfdiv;
-	u8 topresc;
-};
-
-struct dib0090_identity {
-	u8 version;
-	u8 product;
-	u8 p1g;
-	u8 in_soc;
-};
-
-struct dib0090_state {
-	struct i2c_adapter *i2c;
-	struct dvb_frontend *fe;
-	const struct dib0090_config *config;
-
-	u8 current_band;
-	enum frontend_tune_state tune_state;
-	u32 current_rf;
-
-	u16 wbd_offset;
-	s16 wbd_target;		/* in dB */
-
-	s16 rf_gain_limit;	/* take-over-point: where to split between bb and rf gain */
-	s16 current_gain;	/* keeps the currently programmed gain */
-	u8 agc_step;		/* new binary search */
-
-	u16 gain[2];		/* for channel monitoring */
-
-	const u16 *rf_ramp;
-	const u16 *bb_ramp;
-
-	/* for the software AGC ramps */
-	u16 bb_1_def;
-	u16 rf_lt_def;
-	u16 gain_reg[4];
-
-	/* for the captrim/dc-offset search */
-	s8 step;
-	s16 adc_diff;
-	s16 min_adc_diff;
-
-	s8 captrim;
-	s8 fcaptrim;
-
-	const struct dc_calibration *dc;
-	u16 bb6, bb7;
-
-	const struct dib0090_tuning *current_tune_table_index;
-	const struct dib0090_pll *current_pll_table_index;
-
-	u8 tuner_is_tuned;
-	u8 agc_freeze;
-
-	struct dib0090_identity identity;
-
-	u32 rf_request;
-	u8 current_standard;
-
-	u8 calibrate;
-	u32 rest;
-	u16 bias;
-	s16 temperature;
-
-	u8 wbd_calibration_gain;
-	const struct dib0090_wbd_slope *current_wbd_table;
-	u16 wbdmux;
-
-	/* for the I2C transfer */
-	struct i2c_msg msg[2];
-	u8 i2c_write_buffer[3];
-	u8 i2c_read_buffer[2];
-	struct mutex i2c_buffer_lock;
-};
-
-struct dib0090_fw_state {
-	struct i2c_adapter *i2c;
-	struct dvb_frontend *fe;
-	struct dib0090_identity identity;
-	const struct dib0090_config *config;
-
-	/* for the I2C transfer */
-	struct i2c_msg msg;
-	u8 i2c_write_buffer[2];
-	u8 i2c_read_buffer[2];
-	struct mutex i2c_buffer_lock;
-};
-
-static u16 dib0090_read_reg(struct dib0090_state *state, u8 reg)
-{
-	u16 ret;
-
-	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
-		return 0;
-	}
-
-	state->i2c_write_buffer[0] = reg;
-
-	memset(state->msg, 0, 2 * sizeof(struct i2c_msg));
-	state->msg[0].addr = state->config->i2c_address;
-	state->msg[0].flags = 0;
-	state->msg[0].buf = state->i2c_write_buffer;
-	state->msg[0].len = 1;
-	state->msg[1].addr = state->config->i2c_address;
-	state->msg[1].flags = I2C_M_RD;
-	state->msg[1].buf = state->i2c_read_buffer;
-	state->msg[1].len = 2;
-
-	if (i2c_transfer(state->i2c, state->msg, 2) != 2) {
-		printk(KERN_WARNING "DiB0090 I2C read failed\n");
-		ret = 0;
-	} else
-		ret = (state->i2c_read_buffer[0] << 8)
-			| state->i2c_read_buffer[1];
-
-	mutex_unlock(&state->i2c_buffer_lock);
-	return ret;
-}
-
-static int dib0090_write_reg(struct dib0090_state *state, u32 reg, u16 val)
-{
-	int ret;
-
-	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
-		return -EINVAL;
-	}
-
-	state->i2c_write_buffer[0] = reg & 0xff;
-	state->i2c_write_buffer[1] = val >> 8;
-	state->i2c_write_buffer[2] = val & 0xff;
-
-	memset(state->msg, 0, sizeof(struct i2c_msg));
-	state->msg[0].addr = state->config->i2c_address;
-	state->msg[0].flags = 0;
-	state->msg[0].buf = state->i2c_write_buffer;
-	state->msg[0].len = 3;
-
-	if (i2c_transfer(state->i2c, state->msg, 1) != 1) {
-		printk(KERN_WARNING "DiB0090 I2C write failed\n");
-		ret = -EREMOTEIO;
-	} else
-		ret = 0;
-
-	mutex_unlock(&state->i2c_buffer_lock);
-	return ret;
-}
-
-static u16 dib0090_fw_read_reg(struct dib0090_fw_state *state, u8 reg)
-{
-	u16 ret;
-
-	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
-		return 0;
-	}
-
-	state->i2c_write_buffer[0] = reg;
-
-	memset(&state->msg, 0, sizeof(struct i2c_msg));
-	state->msg.addr = reg;
-	state->msg.flags = I2C_M_RD;
-	state->msg.buf = state->i2c_read_buffer;
-	state->msg.len = 2;
-	if (i2c_transfer(state->i2c, &state->msg, 1) != 1) {
-		printk(KERN_WARNING "DiB0090 I2C read failed\n");
-		ret = 0;
-	} else
-		ret = (state->i2c_read_buffer[0] << 8)
-			| state->i2c_read_buffer[1];
-
-	mutex_unlock(&state->i2c_buffer_lock);
-	return ret;
-}
-
-static int dib0090_fw_write_reg(struct dib0090_fw_state *state, u8 reg, u16 val)
-{
-	int ret;
-
-	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
-		return -EINVAL;
-	}
-
-	state->i2c_write_buffer[0] = val >> 8;
-	state->i2c_write_buffer[1] = val & 0xff;
-
-	memset(&state->msg, 0, sizeof(struct i2c_msg));
-	state->msg.addr = reg;
-	state->msg.flags = 0;
-	state->msg.buf = state->i2c_write_buffer;
-	state->msg.len = 2;
-	if (i2c_transfer(state->i2c, &state->msg, 1) != 1) {
-		printk(KERN_WARNING "DiB0090 I2C write failed\n");
-		ret = -EREMOTEIO;
-	} else
-		ret = 0;
-
-	mutex_unlock(&state->i2c_buffer_lock);
-	return ret;
-}
-
-#define HARD_RESET(state) do {  if (cfg->reset) {  if (cfg->sleep) cfg->sleep(fe, 0); msleep(10);  cfg->reset(fe, 1); msleep(10);  cfg->reset(fe, 0); msleep(10);  }  } while (0)
-#define ADC_TARGET -220
-#define GAIN_ALPHA 5
-#define WBD_ALPHA 6
-#define LPF	100
-static void dib0090_write_regs(struct dib0090_state *state, u8 r, const u16 * b, u8 c)
-{
-	do {
-		dib0090_write_reg(state, r++, *b++);
-	} while (--c);
-}
-
-static int dib0090_identify(struct dvb_frontend *fe)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-	u16 v;
-	struct dib0090_identity *identity = &state->identity;
-
-	v = dib0090_read_reg(state, 0x1a);
-
-	identity->p1g = 0;
-	identity->in_soc = 0;
-
-	dprintk("Tuner identification (Version = 0x%04x)", v);
-
-	/* without PLL lock info */
-	v &= ~KROSUS_PLL_LOCKED;
-
-	identity->version = v & 0xff;
-	identity->product = (v >> 8) & 0xf;
-
-	if (identity->product != KROSUS)
-		goto identification_error;
-
-	if ((identity->version & 0x3) == SOC) {
-		identity->in_soc = 1;
-		switch (identity->version) {
-		case SOC_8090_P1G_11R1:
-			dprintk("SOC 8090 P1-G11R1 Has been detected");
-			identity->p1g = 1;
-			break;
-		case SOC_8090_P1G_21R1:
-			dprintk("SOC 8090 P1-G21R1 Has been detected");
-			identity->p1g = 1;
-			break;
-		case SOC_7090_P1G_11R1:
-			dprintk("SOC 7090 P1-G11R1 Has been detected");
-			identity->p1g = 1;
-			break;
-		case SOC_7090_P1G_21R1:
-			dprintk("SOC 7090 P1-G21R1 Has been detected");
-			identity->p1g = 1;
-			break;
-		default:
-			goto identification_error;
-		}
-	} else {
-		switch ((identity->version >> 5) & 0x7) {
-		case MP001:
-			dprintk("MP001 : 9090/8096");
-			break;
-		case MP005:
-			dprintk("MP005 : Single Sband");
-			break;
-		case MP008:
-			dprintk("MP008 : diversity VHF-UHF-LBAND");
-			break;
-		case MP009:
-			dprintk("MP009 : diversity 29098 CBAND-UHF-LBAND-SBAND");
-			break;
-		default:
-			goto identification_error;
-		}
-
-		switch (identity->version & 0x1f) {
-		case P1G_21R2:
-			dprintk("P1G_21R2 detected");
-			identity->p1g = 1;
-			break;
-		case P1G:
-			dprintk("P1G detected");
-			identity->p1g = 1;
-			break;
-		case P1D_E_F:
-			dprintk("P1D/E/F detected");
-			break;
-		case P1C:
-			dprintk("P1C detected");
-			break;
-		case P1A_B:
-			dprintk("P1-A/B detected: driver is deactivated - not available");
-			goto identification_error;
-			break;
-		default:
-			goto identification_error;
-		}
-	}
-
-	return 0;
-
-identification_error:
-	return -EIO;
-}
-
-static int dib0090_fw_identify(struct dvb_frontend *fe)
-{
-	struct dib0090_fw_state *state = fe->tuner_priv;
-	struct dib0090_identity *identity = &state->identity;
-
-	u16 v = dib0090_fw_read_reg(state, 0x1a);
-	identity->p1g = 0;
-	identity->in_soc = 0;
-
-	dprintk("FE: Tuner identification (Version = 0x%04x)", v);
-
-	/* without PLL lock info */
-	v &= ~KROSUS_PLL_LOCKED;
-
-	identity->version = v & 0xff;
-	identity->product = (v >> 8) & 0xf;
-
-	if (identity->product != KROSUS)
-		goto identification_error;
-
-	if ((identity->version & 0x3) == SOC) {
-		identity->in_soc = 1;
-		switch (identity->version) {
-		case SOC_8090_P1G_11R1:
-			dprintk("SOC 8090 P1-G11R1 Has been detected");
-			identity->p1g = 1;
-			break;
-		case SOC_8090_P1G_21R1:
-			dprintk("SOC 8090 P1-G21R1 Has been detected");
-			identity->p1g = 1;
-			break;
-		case SOC_7090_P1G_11R1:
-			dprintk("SOC 7090 P1-G11R1 Has been detected");
-			identity->p1g = 1;
-			break;
-		case SOC_7090_P1G_21R1:
-			dprintk("SOC 7090 P1-G21R1 Has been detected");
-			identity->p1g = 1;
-			break;
-		default:
-			goto identification_error;
-		}
-	} else {
-		switch ((identity->version >> 5) & 0x7) {
-		case MP001:
-			dprintk("MP001 : 9090/8096");
-			break;
-		case MP005:
-			dprintk("MP005 : Single Sband");
-			break;
-		case MP008:
-			dprintk("MP008 : diversity VHF-UHF-LBAND");
-			break;
-		case MP009:
-			dprintk("MP009 : diversity 29098 CBAND-UHF-LBAND-SBAND");
-			break;
-		default:
-			goto identification_error;
-		}
-
-		switch (identity->version & 0x1f) {
-		case P1G_21R2:
-			dprintk("P1G_21R2 detected");
-			identity->p1g = 1;
-			break;
-		case P1G:
-			dprintk("P1G detected");
-			identity->p1g = 1;
-			break;
-		case P1D_E_F:
-			dprintk("P1D/E/F detected");
-			break;
-		case P1C:
-			dprintk("P1C detected");
-			break;
-		case P1A_B:
-			dprintk("P1-A/B detected: driver is deactivated - not available");
-			goto identification_error;
-			break;
-		default:
-			goto identification_error;
-		}
-	}
-
-	return 0;
-
-identification_error:
-	return -EIO;
-}
-
-static void dib0090_reset_digital(struct dvb_frontend *fe, const struct dib0090_config *cfg)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-	u16 PllCfg, i, v;
-
-	HARD_RESET(state);
-
-	dib0090_write_reg(state, 0x24, EN_PLL | EN_CRYSTAL);
-	dib0090_write_reg(state, 0x1b, EN_DIGCLK | EN_PLL | EN_CRYSTAL);	/* PLL, DIG_CLK and CRYSTAL remain */
-
-	if (!cfg->in_soc) {
-		/* adcClkOutRatio=8->7, release reset */
-		dib0090_write_reg(state, 0x20, ((cfg->io.adc_clock_ratio - 1) << 11) | (0 << 10) | (1 << 9) | (1 << 8) | (0 << 4) | 0);
-		if (cfg->clkoutdrive != 0)
-			dib0090_write_reg(state, 0x23, (0 << 15) | ((!cfg->analog_output) << 14) | (2 << 10) | (1 << 9) | (0 << 8)
-					  | (cfg->clkoutdrive << 5) | (cfg->clkouttobamse << 4) | (0 << 2) | (0));
-		else
-			dib0090_write_reg(state, 0x23, (0 << 15) | ((!cfg->analog_output) << 14) | (2 << 10) | (1 << 9) | (0 << 8)
-					  | (7 << 5) | (cfg->clkouttobamse << 4) | (0 << 2) | (0));
-	}
-
-	/* Read Pll current config * */
-	PllCfg = dib0090_read_reg(state, 0x21);
-
-	/** Reconfigure PLL if current setting is different from default setting **/
-	if ((PllCfg & 0x1FFF) != ((cfg->io.pll_range << 12) | (cfg->io.pll_loopdiv << 6) | (cfg->io.pll_prediv)) && (!cfg->in_soc)
-			&& !cfg->io.pll_bypass) {
-
-		/* Set Bypass mode */
-		PllCfg |= (1 << 15);
-		dib0090_write_reg(state, 0x21, PllCfg);
-
-		/* Set Reset Pll */
-		PllCfg &= ~(1 << 13);
-		dib0090_write_reg(state, 0x21, PllCfg);
-
-	/*** Set new Pll configuration in bypass and reset state ***/
-		PllCfg = (1 << 15) | (0 << 13) | (cfg->io.pll_range << 12) | (cfg->io.pll_loopdiv << 6) | (cfg->io.pll_prediv);
-		dib0090_write_reg(state, 0x21, PllCfg);
-
-		/* Remove Reset Pll */
-		PllCfg |= (1 << 13);
-		dib0090_write_reg(state, 0x21, PllCfg);
-
-	/*** Wait for PLL lock ***/
-		i = 100;
-		do {
-			v = !!(dib0090_read_reg(state, 0x1a) & 0x800);
-			if (v)
-				break;
-		} while (--i);
-
-		if (i == 0) {
-			dprintk("Pll: Unable to lock Pll");
-			return;
-		}
-
-		/* Finally Remove Bypass mode */
-		PllCfg &= ~(1 << 15);
-		dib0090_write_reg(state, 0x21, PllCfg);
-	}
-
-	if (cfg->io.pll_bypass) {
-		PllCfg |= (cfg->io.pll_bypass << 15);
-		dib0090_write_reg(state, 0x21, PllCfg);
-	}
-}
-
-static int dib0090_fw_reset_digital(struct dvb_frontend *fe, const struct dib0090_config *cfg)
-{
-	struct dib0090_fw_state *state = fe->tuner_priv;
-	u16 PllCfg;
-	u16 v;
-	int i;
-
-	dprintk("fw reset digital");
-	HARD_RESET(state);
-
-	dib0090_fw_write_reg(state, 0x24, EN_PLL | EN_CRYSTAL);
-	dib0090_fw_write_reg(state, 0x1b, EN_DIGCLK | EN_PLL | EN_CRYSTAL);	/* PLL, DIG_CLK and CRYSTAL remain */
-
-	dib0090_fw_write_reg(state, 0x20,
-			((cfg->io.adc_clock_ratio - 1) << 11) | (0 << 10) | (1 << 9) | (1 << 8) | (cfg->data_tx_drv << 4) | cfg->ls_cfg_pad_drv);
-
-	v = (0 << 15) | ((!cfg->analog_output) << 14) | (1 << 9) | (0 << 8) | (cfg->clkouttobamse << 4) | (0 << 2) | (0);
-	if (cfg->clkoutdrive != 0)
-		v |= cfg->clkoutdrive << 5;
-	else
-		v |= 7 << 5;
-
-	v |= 2 << 10;
-	dib0090_fw_write_reg(state, 0x23, v);
-
-	/* Read Pll current config * */
-	PllCfg = dib0090_fw_read_reg(state, 0x21);
-
-	/** Reconfigure PLL if current setting is different from default setting **/
-	if ((PllCfg & 0x1FFF) != ((cfg->io.pll_range << 12) | (cfg->io.pll_loopdiv << 6) | (cfg->io.pll_prediv)) && !cfg->io.pll_bypass) {
-
-		/* Set Bypass mode */
-		PllCfg |= (1 << 15);
-		dib0090_fw_write_reg(state, 0x21, PllCfg);
-
-		/* Set Reset Pll */
-		PllCfg &= ~(1 << 13);
-		dib0090_fw_write_reg(state, 0x21, PllCfg);
-
-	/*** Set new Pll configuration in bypass and reset state ***/
-		PllCfg = (1 << 15) | (0 << 13) | (cfg->io.pll_range << 12) | (cfg->io.pll_loopdiv << 6) | (cfg->io.pll_prediv);
-		dib0090_fw_write_reg(state, 0x21, PllCfg);
-
-		/* Remove Reset Pll */
-		PllCfg |= (1 << 13);
-		dib0090_fw_write_reg(state, 0x21, PllCfg);
-
-	/*** Wait for PLL lock ***/
-		i = 100;
-		do {
-			v = !!(dib0090_fw_read_reg(state, 0x1a) & 0x800);
-			if (v)
-				break;
-		} while (--i);
-
-		if (i == 0) {
-			dprintk("Pll: Unable to lock Pll");
-			return -EIO;
-		}
-
-		/* Finally Remove Bypass mode */
-		PllCfg &= ~(1 << 15);
-		dib0090_fw_write_reg(state, 0x21, PllCfg);
-	}
-
-	if (cfg->io.pll_bypass) {
-		PllCfg |= (cfg->io.pll_bypass << 15);
-		dib0090_fw_write_reg(state, 0x21, PllCfg);
-	}
-
-	return dib0090_fw_identify(fe);
-}
-
-static int dib0090_wakeup(struct dvb_frontend *fe)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-	if (state->config->sleep)
-		state->config->sleep(fe, 0);
-
-	/* enable dataTX in case we have been restarted in the wrong moment */
-	dib0090_write_reg(state, 0x23, dib0090_read_reg(state, 0x23) | (1 << 14));
-	return 0;
-}
-
-static int dib0090_sleep(struct dvb_frontend *fe)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-	if (state->config->sleep)
-		state->config->sleep(fe, 1);
-	return 0;
-}
-
-void dib0090_dcc_freq(struct dvb_frontend *fe, u8 fast)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-	if (fast)
-		dib0090_write_reg(state, 0x04, 0);
-	else
-		dib0090_write_reg(state, 0x04, 1);
-}
-
-EXPORT_SYMBOL(dib0090_dcc_freq);
-
-static const u16 bb_ramp_pwm_normal_socs[] = {
-	550,			/* max BB gain in 10th of dB */
-	(1 << 9) | 8,		/* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> BB_RAMP2 */
-	440,
-	(4 << 9) | 0,		/* BB_RAMP3 = 26dB */
-	(0 << 9) | 208,		/* BB_RAMP4 */
-	(4 << 9) | 208,		/* BB_RAMP5 = 29dB */
-	(0 << 9) | 440,		/* BB_RAMP6 */
-};
-
-static const u16 rf_ramp_pwm_cband_7090[] = {
-	280,			/* max RF gain in 10th of dB */
-	18,			/* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
-	504,			/* ramp_max = maximum X used on the ramp */
-	(29 << 10) | 364,	/* RF_RAMP5, LNA 1 = 8dB */
-	(0 << 10) | 504,	/* RF_RAMP6, LNA 1 */
-	(60 << 10) | 228,	/* RF_RAMP7, LNA 2 = 7.7dB */
-	(0 << 10) | 364,	/* RF_RAMP8, LNA 2 */
-	(34 << 10) | 109,	/* GAIN_4_1, LNA 3 = 6.8dB */
-	(0 << 10) | 228,	/* GAIN_4_2, LNA 3 */
-	(37 << 10) | 0,		/* RF_RAMP3, LNA 4 = 6.2dB */
-	(0 << 10) | 109,	/* RF_RAMP4, LNA 4 */
-};
-
-static const uint16_t rf_ramp_pwm_cband_7090e_sensitivity[] = {
-	186,
-	40,
-	746,
-	(10 << 10) | 345,
-	(0  << 10) | 746,
-	(0 << 10) | 0,
-	(0  << 10) | 0,
-	(28 << 10) | 200,
-	(0  << 10) | 345,
-	(20 << 10) | 0,
-	(0  << 10) | 200,
-};
-
-static const uint16_t rf_ramp_pwm_cband_7090e_aci[] = {
-	86,
-	40,
-	345,
-	(0 << 10) | 0,
-	(0 << 10) | 0,
-	(0 << 10) | 0,
-	(0 << 10) | 0,
-	(28 << 10) | 200,
-	(0  << 10) | 345,
-	(20 << 10) | 0,
-	(0  << 10) | 200,
-};
-
-static const u16 rf_ramp_pwm_cband_8090[] = {
-	345,			/* max RF gain in 10th of dB */
-	29,			/* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
-	1000,			/* ramp_max = maximum X used on the ramp */
-	(35 << 10) | 772,	/* RF_RAMP3, LNA 1 = 8dB */
-	(0 << 10) | 1000,	/* RF_RAMP4, LNA 1 */
-	(58 << 10) | 496,	/* RF_RAMP5, LNA 2 = 9.5dB */
-	(0 << 10) | 772,	/* RF_RAMP6, LNA 2 */
-	(27 << 10) | 200,	/* RF_RAMP7, LNA 3 = 10.5dB */
-	(0 << 10) | 496,	/* RF_RAMP8, LNA 3 */
-	(40 << 10) | 0,		/* GAIN_4_1, LNA 4 = 7dB */
-	(0 << 10) | 200,	/* GAIN_4_2, LNA 4 */
-};
-
-static const u16 rf_ramp_pwm_uhf_7090[] = {
-	407,			/* max RF gain in 10th of dB */
-	13,			/* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
-	529,			/* ramp_max = maximum X used on the ramp */
-	(23 << 10) | 0,		/* RF_RAMP3, LNA 1 = 14.7dB */
-	(0 << 10) | 176,	/* RF_RAMP4, LNA 1 */
-	(63 << 10) | 400,	/* RF_RAMP5, LNA 2 = 8dB */
-	(0 << 10) | 529,	/* RF_RAMP6, LNA 2 */
-	(48 << 10) | 316,	/* RF_RAMP7, LNA 3 = 6.8dB */
-	(0 << 10) | 400,	/* RF_RAMP8, LNA 3 */
-	(29 << 10) | 176,	/* GAIN_4_1, LNA 4 = 11.5dB */
-	(0 << 10) | 316,	/* GAIN_4_2, LNA 4 */
-};
-
-static const u16 rf_ramp_pwm_uhf_8090[] = {
-	388,			/* max RF gain in 10th of dB */
-	26,			/* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
-	1008,			/* ramp_max = maximum X used on the ramp */
-	(11 << 10) | 0,		/* RF_RAMP3, LNA 1 = 14.7dB */
-	(0 << 10) | 369,	/* RF_RAMP4, LNA 1 */
-	(41 << 10) | 809,	/* RF_RAMP5, LNA 2 = 8dB */
-	(0 << 10) | 1008,	/* RF_RAMP6, LNA 2 */
-	(27 << 10) | 659,	/* RF_RAMP7, LNA 3 = 6dB */
-	(0 << 10) | 809,	/* RF_RAMP8, LNA 3 */
-	(14 << 10) | 369,	/* GAIN_4_1, LNA 4 = 11.5dB */
-	(0 << 10) | 659,	/* GAIN_4_2, LNA 4 */
-};
-
-static const u16 rf_ramp_pwm_cband[] = {
-	0,			/* max RF gain in 10th of dB */
-	0,			/* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> 0x2b */
-	0,			/* ramp_max = maximum X used on the ramp */
-	(0 << 10) | 0,		/* 0x2c, LNA 1 = 0dB */
-	(0 << 10) | 0,		/* 0x2d, LNA 1 */
-	(0 << 10) | 0,		/* 0x2e, LNA 2 = 0dB */
-	(0 << 10) | 0,		/* 0x2f, LNA 2 */
-	(0 << 10) | 0,		/* 0x30, LNA 3 = 0dB */
-	(0 << 10) | 0,		/* 0x31, LNA 3 */
-	(0 << 10) | 0,		/* GAIN_4_1, LNA 4 = 0dB */
-	(0 << 10) | 0,		/* GAIN_4_2, LNA 4 */
-};
-
-static const u16 rf_ramp_vhf[] = {
-	412,			/* max RF gain in 10th of dB */
-	132, 307, 127,		/* LNA1,  13.2dB */
-	105, 412, 255,		/* LNA2,  10.5dB */
-	50, 50, 127,		/* LNA3,  5dB */
-	125, 175, 127,		/* LNA4,  12.5dB */
-	0, 0, 127,		/* CBAND, 0dB */
-};
-
-static const u16 rf_ramp_uhf[] = {
-	412,			/* max RF gain in 10th of dB */
-	132, 307, 127,		/* LNA1  : total gain = 13.2dB, point on the ramp where this amp is full gain, value to write to get full gain */
-	105, 412, 255,		/* LNA2  : 10.5 dB */
-	50, 50, 127,		/* LNA3  :  5.0 dB */
-	125, 175, 127,		/* LNA4  : 12.5 dB */
-	0, 0, 127,		/* CBAND :  0.0 dB */
-};
-
-static const u16 rf_ramp_cband_broadmatching[] =	/* for p1G only */
-{
-	314,			/* Calibrated at 200MHz order has been changed g4-g3-g2-g1 */
-	84, 314, 127,		/* LNA1 */
-	80, 230, 255,		/* LNA2 */
-	80, 150, 127,		/* LNA3  It was measured 12dB, do not lock if 120 */
-	70, 70, 127,		/* LNA4 */
-	0, 0, 127,		/* CBAND */
-};
-
-static const u16 rf_ramp_cband[] = {
-	332,			/* max RF gain in 10th of dB */
-	132, 252, 127,		/* LNA1,  dB */
-	80, 332, 255,		/* LNA2,  dB */
-	0, 0, 127,		/* LNA3,  dB */
-	0, 0, 127,		/* LNA4,  dB */
-	120, 120, 127,		/* LT1 CBAND */
-};
-
-static const u16 rf_ramp_pwm_vhf[] = {
-	404,			/* max RF gain in 10th of dB */
-	25,			/* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> 0x2b */
-	1011,			/* ramp_max = maximum X used on the ramp */
-	(6 << 10) | 417,	/* 0x2c, LNA 1 = 13.2dB */
-	(0 << 10) | 756,	/* 0x2d, LNA 1 */
-	(16 << 10) | 756,	/* 0x2e, LNA 2 = 10.5dB */
-	(0 << 10) | 1011,	/* 0x2f, LNA 2 */
-	(16 << 10) | 290,	/* 0x30, LNA 3 = 5dB */
-	(0 << 10) | 417,	/* 0x31, LNA 3 */
-	(7 << 10) | 0,		/* GAIN_4_1, LNA 4 = 12.5dB */
-	(0 << 10) | 290,	/* GAIN_4_2, LNA 4 */
-};
-
-static const u16 rf_ramp_pwm_uhf[] = {
-	404,			/* max RF gain in 10th of dB */
-	25,			/* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> 0x2b */
-	1011,			/* ramp_max = maximum X used on the ramp */
-	(6 << 10) | 417,	/* 0x2c, LNA 1 = 13.2dB */
-	(0 << 10) | 756,	/* 0x2d, LNA 1 */
-	(16 << 10) | 756,	/* 0x2e, LNA 2 = 10.5dB */
-	(0 << 10) | 1011,	/* 0x2f, LNA 2 */
-	(16 << 10) | 0,		/* 0x30, LNA 3 = 5dB */
-	(0 << 10) | 127,	/* 0x31, LNA 3 */
-	(7 << 10) | 127,	/* GAIN_4_1, LNA 4 = 12.5dB */
-	(0 << 10) | 417,	/* GAIN_4_2, LNA 4 */
-};
-
-static const u16 bb_ramp_boost[] = {
-	550,			/* max BB gain in 10th of dB */
-	260, 260, 26,		/* BB1, 26dB */
-	290, 550, 29,		/* BB2, 29dB */
-};
-
-static const u16 bb_ramp_pwm_normal[] = {
-	500,			/* max RF gain in 10th of dB */
-	8,			/* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> 0x34 */
-	400,
-	(2 << 9) | 0,		/* 0x35 = 21dB */
-	(0 << 9) | 168,		/* 0x36 */
-	(2 << 9) | 168,		/* 0x37 = 29dB */
-	(0 << 9) | 400,		/* 0x38 */
-};
-
-struct slope {
-	s16 range;
-	s16 slope;
-};
-static u16 slopes_to_scale(const struct slope *slopes, u8 num, s16 val)
-{
-	u8 i;
-	u16 rest;
-	u16 ret = 0;
-	for (i = 0; i < num; i++) {
-		if (val > slopes[i].range)
-			rest = slopes[i].range;
-		else
-			rest = val;
-		ret += (rest * slopes[i].slope) / slopes[i].range;
-		val -= rest;
-	}
-	return ret;
-}
-
-static const struct slope dib0090_wbd_slopes[3] = {
-	{66, 120},		/* -64,-52: offset -   65 */
-	{600, 170},		/* -52,-35: 65     -  665 */
-	{170, 250},		/* -45,-10: 665    - 835 */
-};
-
-static s16 dib0090_wbd_to_db(struct dib0090_state *state, u16 wbd)
-{
-	wbd &= 0x3ff;
-	if (wbd < state->wbd_offset)
-		wbd = 0;
-	else
-		wbd -= state->wbd_offset;
-	/* -64dB is the floor */
-	return -640 + (s16) slopes_to_scale(dib0090_wbd_slopes, ARRAY_SIZE(dib0090_wbd_slopes), wbd);
-}
-
-static void dib0090_wbd_target(struct dib0090_state *state, u32 rf)
-{
-	u16 offset = 250;
-
-	/* TODO : DAB digital N+/-1 interferer perfs : offset = 10 */
-
-	if (state->current_band == BAND_VHF)
-		offset = 650;
-#ifndef FIRMWARE_FIREFLY
-	if (state->current_band == BAND_VHF)
-		offset = state->config->wbd_vhf_offset;
-	if (state->current_band == BAND_CBAND)
-		offset = state->config->wbd_cband_offset;
-#endif
-
-	state->wbd_target = dib0090_wbd_to_db(state, state->wbd_offset + offset);
-	dprintk("wbd-target: %d dB", (u32) state->wbd_target);
-}
-
-static const int gain_reg_addr[4] = {
-	0x08, 0x0a, 0x0f, 0x01
-};
-
-static void dib0090_gain_apply(struct dib0090_state *state, s16 gain_delta, s16 top_delta, u8 force)
-{
-	u16 rf, bb, ref;
-	u16 i, v, gain_reg[4] = { 0 }, gain;
-	const u16 *g;
-
-	if (top_delta < -511)
-		top_delta = -511;
-	if (top_delta > 511)
-		top_delta = 511;
-
-	if (force) {
-		top_delta *= (1 << WBD_ALPHA);
-		gain_delta *= (1 << GAIN_ALPHA);
-	}
-
-	if (top_delta >= ((s16) (state->rf_ramp[0] << WBD_ALPHA) - state->rf_gain_limit))	/* overflow */
-		state->rf_gain_limit = state->rf_ramp[0] << WBD_ALPHA;
-	else
-		state->rf_gain_limit += top_delta;
-
-	if (state->rf_gain_limit < 0)	/*underflow */
-		state->rf_gain_limit = 0;
-
-	/* use gain as a temporary variable and correct current_gain */
-	gain = ((state->rf_gain_limit >> WBD_ALPHA) + state->bb_ramp[0]) << GAIN_ALPHA;
-	if (gain_delta >= ((s16) gain - state->current_gain))	/* overflow */
-		state->current_gain = gain;
-	else
-		state->current_gain += gain_delta;
-	/* cannot be less than 0 (only if gain_delta is less than 0 we can have current_gain < 0) */
-	if (state->current_gain < 0)
-		state->current_gain = 0;
-
-	/* now split total gain to rf and bb gain */
-	gain = state->current_gain >> GAIN_ALPHA;
-
-	/* requested gain is bigger than rf gain limit - ACI/WBD adjustment */
-	if (gain > (state->rf_gain_limit >> WBD_ALPHA)) {
-		rf = state->rf_gain_limit >> WBD_ALPHA;
-		bb = gain - rf;
-		if (bb > state->bb_ramp[0])
-			bb = state->bb_ramp[0];
-	} else {		/* high signal level -> all gains put on RF */
-		rf = gain;
-		bb = 0;
-	}
-
-	state->gain[0] = rf;
-	state->gain[1] = bb;
-
-	/* software ramp */
-	/* Start with RF gains */
-	g = state->rf_ramp + 1;	/* point on RF LNA1 max gain */
-	ref = rf;
-	for (i = 0; i < 7; i++) {	/* Go over all amplifiers => 5RF amps + 2 BB amps = 7 amps */
-		if (g[0] == 0 || ref < (g[1] - g[0]))	/* if total gain of the current amp is null or this amp is not concerned because it starts to work from an higher gain value */
-			v = 0;	/* force the gain to write for the current amp to be null */
-		else if (ref >= g[1])	/* Gain to set is higher than the high working point of this amp */
-			v = g[2];	/* force this amp to be full gain */
-		else		/* compute the value to set to this amp because we are somewhere in his range */
-			v = ((ref - (g[1] - g[0])) * g[2]) / g[0];
-
-		if (i == 0)	/* LNA 1 reg mapping */
-			gain_reg[0] = v;
-		else if (i == 1)	/* LNA 2 reg mapping */
-			gain_reg[0] |= v << 7;
-		else if (i == 2)	/* LNA 3 reg mapping */
-			gain_reg[1] = v;
-		else if (i == 3)	/* LNA 4 reg mapping */
-			gain_reg[1] |= v << 7;
-		else if (i == 4)	/* CBAND LNA reg mapping */
-			gain_reg[2] = v | state->rf_lt_def;
-		else if (i == 5)	/* BB gain 1 reg mapping */
-			gain_reg[3] = v << 3;
-		else if (i == 6)	/* BB gain 2 reg mapping */
-			gain_reg[3] |= v << 8;
-
-		g += 3;		/* go to next gain bloc */
-
-		/* When RF is finished, start with BB */
-		if (i == 4) {
-			g = state->bb_ramp + 1;	/* point on BB gain 1 max gain */
-			ref = bb;
-		}
-	}
-	gain_reg[3] |= state->bb_1_def;
-	gain_reg[3] |= ((bb % 10) * 100) / 125;
-
-#ifdef DEBUG_AGC
-	dprintk("GA CALC: DB: %3d(rf) + %3d(bb) = %3d gain_reg[0]=%04x gain_reg[1]=%04x gain_reg[2]=%04x gain_reg[0]=%04x", rf, bb, rf + bb,
-		gain_reg[0], gain_reg[1], gain_reg[2], gain_reg[3]);
-#endif
-
-	/* Write the amplifier regs */
-	for (i = 0; i < 4; i++) {
-		v = gain_reg[i];
-		if (force || state->gain_reg[i] != v) {
-			state->gain_reg[i] = v;
-			dib0090_write_reg(state, gain_reg_addr[i], v);
-		}
-	}
-}
-
-static void dib0090_set_boost(struct dib0090_state *state, int onoff)
-{
-	state->bb_1_def &= 0xdfff;
-	state->bb_1_def |= onoff << 13;
-}
-
-static void dib0090_set_rframp(struct dib0090_state *state, const u16 * cfg)
-{
-	state->rf_ramp = cfg;
-}
-
-static void dib0090_set_rframp_pwm(struct dib0090_state *state, const u16 * cfg)
-{
-	state->rf_ramp = cfg;
-
-	dib0090_write_reg(state, 0x2a, 0xffff);
-
-	dprintk("total RF gain: %ddB, step: %d", (u32) cfg[0], dib0090_read_reg(state, 0x2a));
-
-	dib0090_write_regs(state, 0x2c, cfg + 3, 6);
-	dib0090_write_regs(state, 0x3e, cfg + 9, 2);
-}
-
-static void dib0090_set_bbramp(struct dib0090_state *state, const u16 * cfg)
-{
-	state->bb_ramp = cfg;
-	dib0090_set_boost(state, cfg[0] > 500);	/* we want the boost if the gain is higher that 50dB */
-}
-
-static void dib0090_set_bbramp_pwm(struct dib0090_state *state, const u16 * cfg)
-{
-	state->bb_ramp = cfg;
-
-	dib0090_set_boost(state, cfg[0] > 500);	/* we want the boost if the gain is higher that 50dB */
-
-	dib0090_write_reg(state, 0x33, 0xffff);
-	dprintk("total BB gain: %ddB, step: %d", (u32) cfg[0], dib0090_read_reg(state, 0x33));
-	dib0090_write_regs(state, 0x35, cfg + 3, 4);
-}
-
-void dib0090_pwm_gain_reset(struct dvb_frontend *fe)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-	/* reset the AGC */
-
-	if (state->config->use_pwm_agc) {
-#ifdef CONFIG_BAND_SBAND
-		if (state->current_band == BAND_SBAND) {
-			dib0090_set_rframp_pwm(state, rf_ramp_pwm_sband);
-			dib0090_set_bbramp_pwm(state, bb_ramp_pwm_boost);
-		} else
-#endif
-#ifdef CONFIG_BAND_CBAND
-		if (state->current_band == BAND_CBAND) {
-			if (state->identity.in_soc) {
-				dib0090_set_bbramp_pwm(state, bb_ramp_pwm_normal_socs);
-				if (state->identity.version == SOC_8090_P1G_11R1 || state->identity.version == SOC_8090_P1G_21R1)
-					dib0090_set_rframp_pwm(state, rf_ramp_pwm_cband_8090);
-				else if (state->identity.version == SOC_7090_P1G_11R1
-						|| state->identity.version == SOC_7090_P1G_21R1) {
-					if (state->config->is_dib7090e) {
-						if (state->rf_ramp == NULL)
-							dib0090_set_rframp_pwm(state, rf_ramp_pwm_cband_7090e_sensitivity);
-						else
-							dib0090_set_rframp_pwm(state, state->rf_ramp);
-					} else
-						dib0090_set_rframp_pwm(state, rf_ramp_pwm_cband_7090);
-				}
-			} else {
-				dib0090_set_rframp_pwm(state, rf_ramp_pwm_cband);
-				dib0090_set_bbramp_pwm(state, bb_ramp_pwm_normal);
-			}
-		} else
-#endif
-#ifdef CONFIG_BAND_VHF
-		if (state->current_band == BAND_VHF) {
-			if (state->identity.in_soc) {
-				dib0090_set_bbramp_pwm(state, bb_ramp_pwm_normal_socs);
-			} else {
-				dib0090_set_rframp_pwm(state, rf_ramp_pwm_vhf);
-				dib0090_set_bbramp_pwm(state, bb_ramp_pwm_normal);
-			}
-		} else
-#endif
-		{
-			if (state->identity.in_soc) {
-				if (state->identity.version == SOC_8090_P1G_11R1 || state->identity.version == SOC_8090_P1G_21R1)
-					dib0090_set_rframp_pwm(state, rf_ramp_pwm_uhf_8090);
-				else if (state->identity.version == SOC_7090_P1G_11R1 || state->identity.version == SOC_7090_P1G_21R1)
-					dib0090_set_rframp_pwm(state, rf_ramp_pwm_uhf_7090);
-				dib0090_set_bbramp_pwm(state, bb_ramp_pwm_normal_socs);
-			} else {
-				dib0090_set_rframp_pwm(state, rf_ramp_pwm_uhf);
-				dib0090_set_bbramp_pwm(state, bb_ramp_pwm_normal);
-			}
-		}
-
-		if (state->rf_ramp[0] != 0)
-			dib0090_write_reg(state, 0x32, (3 << 11));
-		else
-			dib0090_write_reg(state, 0x32, (0 << 11));
-
-		dib0090_write_reg(state, 0x04, 0x03);
-		dib0090_write_reg(state, 0x39, (1 << 10));
-	}
-}
-
-EXPORT_SYMBOL(dib0090_pwm_gain_reset);
-
-void dib0090_set_dc_servo(struct dvb_frontend *fe, u8 DC_servo_cutoff)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-	if (DC_servo_cutoff < 4)
-		dib0090_write_reg(state, 0x04, DC_servo_cutoff);
-}
-EXPORT_SYMBOL(dib0090_set_dc_servo);
-
-static u32 dib0090_get_slow_adc_val(struct dib0090_state *state)
-{
-	u16 adc_val = dib0090_read_reg(state, 0x1d);
-	if (state->identity.in_soc)
-		adc_val >>= 2;
-	return adc_val;
-}
-
-int dib0090_gain_control(struct dvb_frontend *fe)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-	enum frontend_tune_state *tune_state = &state->tune_state;
-	int ret = 10;
-
-	u16 wbd_val = 0;
-	u8 apply_gain_immediatly = 1;
-	s16 wbd_error = 0, adc_error = 0;
-
-	if (*tune_state == CT_AGC_START) {
-		state->agc_freeze = 0;
-		dib0090_write_reg(state, 0x04, 0x0);
-
-#ifdef CONFIG_BAND_SBAND
-		if (state->current_band == BAND_SBAND) {
-			dib0090_set_rframp(state, rf_ramp_sband);
-			dib0090_set_bbramp(state, bb_ramp_boost);
-		} else
-#endif
-#ifdef CONFIG_BAND_VHF
-		if (state->current_band == BAND_VHF && !state->identity.p1g) {
-			dib0090_set_rframp(state, rf_ramp_vhf);
-			dib0090_set_bbramp(state, bb_ramp_boost);
-		} else
-#endif
-#ifdef CONFIG_BAND_CBAND
-		if (state->current_band == BAND_CBAND && !state->identity.p1g) {
-			dib0090_set_rframp(state, rf_ramp_cband);
-			dib0090_set_bbramp(state, bb_ramp_boost);
-		} else
-#endif
-		if ((state->current_band == BAND_CBAND || state->current_band == BAND_VHF) && state->identity.p1g) {
-			dib0090_set_rframp(state, rf_ramp_cband_broadmatching);
-			dib0090_set_bbramp(state, bb_ramp_boost);
-		} else {
-			dib0090_set_rframp(state, rf_ramp_uhf);
-			dib0090_set_bbramp(state, bb_ramp_boost);
-		}
-
-		dib0090_write_reg(state, 0x32, 0);
-		dib0090_write_reg(state, 0x39, 0);
-
-		dib0090_wbd_target(state, state->current_rf);
-
-		state->rf_gain_limit = state->rf_ramp[0] << WBD_ALPHA;
-		state->current_gain = ((state->rf_ramp[0] + state->bb_ramp[0]) / 2) << GAIN_ALPHA;
-
-		*tune_state = CT_AGC_STEP_0;
-	} else if (!state->agc_freeze) {
-		s16 wbd = 0, i, cnt;
-
-		int adc;
-		wbd_val = dib0090_get_slow_adc_val(state);
-
-		if (*tune_state == CT_AGC_STEP_0)
-			cnt = 5;
-		else
-			cnt = 1;
-
-		for (i = 0; i < cnt; i++) {
-			wbd_val = dib0090_get_slow_adc_val(state);
-			wbd += dib0090_wbd_to_db(state, wbd_val);
-		}
-		wbd /= cnt;
-		wbd_error = state->wbd_target - wbd;
-
-		if (*tune_state == CT_AGC_STEP_0) {
-			if (wbd_error < 0 && state->rf_gain_limit > 0 && !state->identity.p1g) {
-#ifdef CONFIG_BAND_CBAND
-				/* in case of CBAND tune reduce first the lt_gain2 before adjusting the RF gain */
-				u8 ltg2 = (state->rf_lt_def >> 10) & 0x7;
-				if (state->current_band == BAND_CBAND && ltg2) {
-					ltg2 >>= 1;
-					state->rf_lt_def &= ltg2 << 10;	/* reduce in 3 steps from 7 to 0 */
-				}
-#endif
-			} else {
-				state->agc_step = 0;
-				*tune_state = CT_AGC_STEP_1;
-			}
-		} else {
-			/* calc the adc power */
-			adc = state->config->get_adc_power(fe);
-			adc = (adc * ((s32) 355774) + (((s32) 1) << 20)) >> 21;	/* included in [0:-700] */
-
-			adc_error = (s16) (((s32) ADC_TARGET) - adc);
-#ifdef CONFIG_STANDARD_DAB
-			if (state->fe->dtv_property_cache.delivery_system == STANDARD_DAB)
-				adc_error -= 10;
-#endif
-#ifdef CONFIG_STANDARD_DVBT
-			if (state->fe->dtv_property_cache.delivery_system == STANDARD_DVBT &&
-					(state->fe->dtv_property_cache.modulation == QAM_64 || state->fe->dtv_property_cache.modulation == QAM_16))
-				adc_error += 60;
-#endif
-#ifdef CONFIG_SYS_ISDBT
-			if ((state->fe->dtv_property_cache.delivery_system == SYS_ISDBT) && (((state->fe->dtv_property_cache.layer[0].segment_count >
-								0)
-							&&
-							((state->fe->dtv_property_cache.layer[0].modulation ==
-							  QAM_64)
-							 || (state->fe->dtv_property_cache.
-								 layer[0].modulation == QAM_16)))
-						||
-						((state->fe->dtv_property_cache.layer[1].segment_count >
-						  0)
-						 &&
-						 ((state->fe->dtv_property_cache.layer[1].modulation ==
-						   QAM_64)
-						  || (state->fe->dtv_property_cache.
-							  layer[1].modulation == QAM_16)))
-						||
-						((state->fe->dtv_property_cache.layer[2].segment_count >
-						  0)
-						 &&
-						 ((state->fe->dtv_property_cache.layer[2].modulation ==
-						   QAM_64)
-						  || (state->fe->dtv_property_cache.
-							  layer[2].modulation == QAM_16)))
-						)
-				)
-				adc_error += 60;
-#endif
-
-			if (*tune_state == CT_AGC_STEP_1) {	/* quickly go to the correct range of the ADC power */
-				if (ABS(adc_error) < 50 || state->agc_step++ > 5) {
-
-#ifdef CONFIG_STANDARD_DAB
-					if (state->fe->dtv_property_cache.delivery_system == STANDARD_DAB) {
-						dib0090_write_reg(state, 0x02, (1 << 15) | (15 << 11) | (31 << 6) | (63));	/* cap value = 63 : narrow BB filter : Fc = 1.8MHz */
-						dib0090_write_reg(state, 0x04, 0x0);
-					} else
-#endif
-					{
-						dib0090_write_reg(state, 0x02, (1 << 15) | (3 << 11) | (6 << 6) | (32));
-						dib0090_write_reg(state, 0x04, 0x01);	/*0 = 1KHz ; 1 = 150Hz ; 2 = 50Hz ; 3 = 50KHz ; 4 = servo fast */
-					}
-
-					*tune_state = CT_AGC_STOP;
-				}
-			} else {
-				/* everything higher than or equal to CT_AGC_STOP means tracking */
-				ret = 100;	/* 10ms interval */
-				apply_gain_immediatly = 0;
-			}
-		}
-#ifdef DEBUG_AGC
-		dprintk
-			("tune state %d, ADC = %3ddB (ADC err %3d) WBD %3ddB (WBD err %3d, WBD val SADC: %4d), RFGainLimit (TOP): %3d, signal: %3ddBm",
-			 (u32) *tune_state, (u32) adc, (u32) adc_error, (u32) wbd, (u32) wbd_error, (u32) wbd_val,
-			 (u32) state->rf_gain_limit >> WBD_ALPHA, (s32) 200 + adc - (state->current_gain >> GAIN_ALPHA));
-#endif
-	}
-
-	/* apply gain */
-	if (!state->agc_freeze)
-		dib0090_gain_apply(state, adc_error, wbd_error, apply_gain_immediatly);
-	return ret;
-}
-
-EXPORT_SYMBOL(dib0090_gain_control);
-
-void dib0090_get_current_gain(struct dvb_frontend *fe, u16 * rf, u16 * bb, u16 * rf_gain_limit, u16 * rflt)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-	if (rf)
-		*rf = state->gain[0];
-	if (bb)
-		*bb = state->gain[1];
-	if (rf_gain_limit)
-		*rf_gain_limit = state->rf_gain_limit;
-	if (rflt)
-		*rflt = (state->rf_lt_def >> 10) & 0x7;
-}
-
-EXPORT_SYMBOL(dib0090_get_current_gain);
-
-u16 dib0090_get_wbd_target(struct dvb_frontend *fe)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-	u32 f_MHz = state->fe->dtv_property_cache.frequency / 1000000;
-	s32 current_temp = state->temperature;
-	s32 wbd_thot, wbd_tcold;
-	const struct dib0090_wbd_slope *wbd = state->current_wbd_table;
-
-	while (f_MHz > wbd->max_freq)
-		wbd++;
-
-	dprintk("using wbd-table-entry with max freq %d", wbd->max_freq);
-
-	if (current_temp < 0)
-		current_temp = 0;
-	if (current_temp > 128)
-		current_temp = 128;
-
-	state->wbdmux &= ~(7 << 13);
-	if (wbd->wbd_gain != 0)
-		state->wbdmux |= (wbd->wbd_gain << 13);
-	else
-		state->wbdmux |= (4 << 13);
-
-	dib0090_write_reg(state, 0x10, state->wbdmux);
-
-	wbd_thot = wbd->offset_hot - (((u32) wbd->slope_hot * f_MHz) >> 6);
-	wbd_tcold = wbd->offset_cold - (((u32) wbd->slope_cold * f_MHz) >> 6);
-
-	wbd_tcold += ((wbd_thot - wbd_tcold) * current_temp) >> 7;
-
-	state->wbd_target = dib0090_wbd_to_db(state, state->wbd_offset + wbd_tcold);
-	dprintk("wbd-target: %d dB", (u32) state->wbd_target);
-	dprintk("wbd offset applied is %d", wbd_tcold);
-
-	return state->wbd_offset + wbd_tcold;
-}
-EXPORT_SYMBOL(dib0090_get_wbd_target);
-
-u16 dib0090_get_wbd_offset(struct dvb_frontend *fe)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-	return state->wbd_offset;
-}
-EXPORT_SYMBOL(dib0090_get_wbd_offset);
-
-int dib0090_set_switch(struct dvb_frontend *fe, u8 sw1, u8 sw2, u8 sw3)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-
-	dib0090_write_reg(state, 0x0b, (dib0090_read_reg(state, 0x0b) & 0xfff8)
-			| ((sw3 & 1) << 2) | ((sw2 & 1) << 1) | (sw1 & 1));
-
-	return 0;
-}
-EXPORT_SYMBOL(dib0090_set_switch);
-
-int dib0090_set_vga(struct dvb_frontend *fe, u8 onoff)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-
-	dib0090_write_reg(state, 0x09, (dib0090_read_reg(state, 0x09) & 0x7fff)
-			| ((onoff & 1) << 15));
-	return 0;
-}
-EXPORT_SYMBOL(dib0090_set_vga);
-
-int dib0090_update_rframp_7090(struct dvb_frontend *fe, u8 cfg_sensitivity)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-
-	if ((!state->identity.p1g) || (!state->identity.in_soc)
-			|| ((state->identity.version != SOC_7090_P1G_21R1)
-				&& (state->identity.version != SOC_7090_P1G_11R1))) {
-		dprintk("%s() function can only be used for dib7090P", __func__);
-		return -ENODEV;
-	}
-
-	if (cfg_sensitivity)
-		state->rf_ramp = (const u16 *)&rf_ramp_pwm_cband_7090e_sensitivity;
-	else
-		state->rf_ramp = (const u16 *)&rf_ramp_pwm_cband_7090e_aci;
-	dib0090_pwm_gain_reset(fe);
-
-	return 0;
-}
-EXPORT_SYMBOL(dib0090_update_rframp_7090);
-
-static const u16 dib0090_defaults[] = {
-
-	25, 0x01,
-	0x0000,
-	0x99a0,
-	0x6008,
-	0x0000,
-	0x8bcb,
-	0x0000,
-	0x0405,
-	0x0000,
-	0x0000,
-	0x0000,
-	0xb802,
-	0x0300,
-	0x2d12,
-	0xbac0,
-	0x7c00,
-	0xdbb9,
-	0x0954,
-	0x0743,
-	0x8000,
-	0x0001,
-	0x0040,
-	0x0100,
-	0x0000,
-	0xe910,
-	0x149e,
-
-	1, 0x1c,
-	0xff2d,
-
-	1, 0x39,
-	0x0000,
-
-	2, 0x1e,
-	0x07FF,
-	0x0007,
-
-	1, 0x24,
-	EN_UHF | EN_CRYSTAL,
-
-	2, 0x3c,
-	0x3ff,
-	0x111,
-	0
-};
-
-static const u16 dib0090_p1g_additionnal_defaults[] = {
-	1, 0x05,
-	0xabcd,
-
-	1, 0x11,
-	0x00b4,
-
-	1, 0x1c,
-	0xfffd,
-
-	1, 0x40,
-	0x108,
-	0
-};
-
-static void dib0090_set_default_config(struct dib0090_state *state, const u16 * n)
-{
-	u16 l, r;
-
-	l = pgm_read_word(n++);
-	while (l) {
-		r = pgm_read_word(n++);
-		do {
-			dib0090_write_reg(state, r, pgm_read_word(n++));
-			r++;
-		} while (--l);
-		l = pgm_read_word(n++);
-	}
-}
-
-#define CAP_VALUE_MIN (u8)  9
-#define CAP_VALUE_MAX (u8) 40
-#define HR_MIN	      (u8) 25
-#define HR_MAX	      (u8) 40
-#define POLY_MIN      (u8)  0
-#define POLY_MAX      (u8)  8
-
-static void dib0090_set_EFUSE(struct dib0090_state *state)
-{
-	u8 c, h, n;
-	u16 e2, e4;
-	u16 cal;
-
-	e2 = dib0090_read_reg(state, 0x26);
-	e4 = dib0090_read_reg(state, 0x28);
-
-	if ((state->identity.version == P1D_E_F) ||
-			(state->identity.version == P1G) || (e2 == 0xffff)) {
-
-		dib0090_write_reg(state, 0x22, 0x10);
-		cal = (dib0090_read_reg(state, 0x22) >> 6) & 0x3ff;
-
-		if ((cal < 670) || (cal == 1023))
-			cal = 850;
-		n = 165 - ((cal * 10)>>6) ;
-		e2 = e4 = (3<<12) | (34<<6) | (n);
-	}
-
-	if (e2 != e4)
-		e2 &= e4; /* Remove the redundancy  */
-
-	if (e2 != 0xffff) {
-		c = e2 & 0x3f;
-		n = (e2 >> 12) & 0xf;
-		h = (e2 >> 6) & 0x3f;
-
-		if ((c >= CAP_VALUE_MAX) || (c <= CAP_VALUE_MIN))
-			c = 32;
-		if ((h >= HR_MAX) || (h <= HR_MIN))
-			h = 34;
-		if ((n >= POLY_MAX) || (n <= POLY_MIN))
-			n = 3;
-
-		dib0090_write_reg(state, 0x13, (h << 10)) ;
-		e2 = (n<<11) | ((h>>2)<<6) | (c);
-		dib0090_write_reg(state, 0x2, e2) ; /* Load the BB_2 */
-	}
-}
-
-static int dib0090_reset(struct dvb_frontend *fe)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-
-	dib0090_reset_digital(fe, state->config);
-	if (dib0090_identify(fe) < 0)
-		return -EIO;
-
-#ifdef CONFIG_TUNER_DIB0090_P1B_SUPPORT
-	if (!(state->identity.version & 0x1))	/* it is P1B - reset is already done */
-		return 0;
-#endif
-
-	if (!state->identity.in_soc) {
-		if ((dib0090_read_reg(state, 0x1a) >> 5) & 0x2)
-			dib0090_write_reg(state, 0x1b, (EN_IQADC | EN_BB | EN_BIAS | EN_DIGCLK | EN_PLL | EN_CRYSTAL));
-		else
-			dib0090_write_reg(state, 0x1b, (EN_DIGCLK | EN_PLL | EN_CRYSTAL));
-	}
-
-	dib0090_set_default_config(state, dib0090_defaults);
-
-	if (state->identity.in_soc)
-		dib0090_write_reg(state, 0x18, 0x2910);  /* charge pump current = 0 */
-
-	if (state->identity.p1g)
-		dib0090_set_default_config(state, dib0090_p1g_additionnal_defaults);
-
-	/* Update the efuse : Only available for KROSUS > P1C  and SOC as well*/
-	if (((state->identity.version & 0x1f) >= P1D_E_F) || (state->identity.in_soc))
-		dib0090_set_EFUSE(state);
-
-	/* Congigure in function of the crystal */
-	if (state->config->force_crystal_mode != 0)
-		dib0090_write_reg(state, 0x14,
-				state->config->force_crystal_mode & 3);
-	else if (state->config->io.clock_khz >= 24000)
-		dib0090_write_reg(state, 0x14, 1);
-	else
-		dib0090_write_reg(state, 0x14, 2);
-	dprintk("Pll lock : %d", (dib0090_read_reg(state, 0x1a) >> 11) & 0x1);
-
-	state->calibrate = DC_CAL | WBD_CAL | TEMP_CAL;	/* enable iq-offset-calibration and wbd-calibration when tuning next time */
-
-	return 0;
-}
-
-#define steps(u) (((u) > 15) ? ((u)-16) : (u))
-#define INTERN_WAIT 10
-static int dib0090_get_offset(struct dib0090_state *state, enum frontend_tune_state *tune_state)
-{
-	int ret = INTERN_WAIT * 10;
-
-	switch (*tune_state) {
-	case CT_TUNER_STEP_2:
-		/* Turns to positive */
-		dib0090_write_reg(state, 0x1f, 0x7);
-		*tune_state = CT_TUNER_STEP_3;
-		break;
-
-	case CT_TUNER_STEP_3:
-		state->adc_diff = dib0090_read_reg(state, 0x1d);
-
-		/* Turns to negative */
-		dib0090_write_reg(state, 0x1f, 0x4);
-		*tune_state = CT_TUNER_STEP_4;
-		break;
-
-	case CT_TUNER_STEP_4:
-		state->adc_diff -= dib0090_read_reg(state, 0x1d);
-		*tune_state = CT_TUNER_STEP_5;
-		ret = 0;
-		break;
-
-	default:
-		break;
-	}
-
-	return ret;
-}
-
-struct dc_calibration {
-	u8 addr;
-	u8 offset;
-	u8 pga:1;
-	u16 bb1;
-	u8 i:1;
-};
-
-static const struct dc_calibration dc_table[] = {
-	/* Step1 BB gain1= 26 with boost 1, gain 2 = 0 */
-	{0x06, 5, 1, (1 << 13) | (0 << 8) | (26 << 3), 1},
-	{0x07, 11, 1, (1 << 13) | (0 << 8) | (26 << 3), 0},
-	/* Step 2 BB gain 1 = 26 with boost = 1 & gain 2 = 29 */
-	{0x06, 0, 0, (1 << 13) | (29 << 8) | (26 << 3), 1},
-	{0x06, 10, 0, (1 << 13) | (29 << 8) | (26 << 3), 0},
-	{0},
-};
-
-static const struct dc_calibration dc_p1g_table[] = {
-	/* Step1 BB gain1= 26 with boost 1, gain 2 = 0 */
-	/* addr ; trim reg offset ; pga ; CTRL_BB1 value ; i or q */
-	{0x06, 5, 1, (1 << 13) | (0 << 8) | (15 << 3), 1},
-	{0x07, 11, 1, (1 << 13) | (0 << 8) | (15 << 3), 0},
-	/* Step 2 BB gain 1 = 26 with boost = 1 & gain 2 = 29 */
-	{0x06, 0, 0, (1 << 13) | (29 << 8) | (15 << 3), 1},
-	{0x06, 10, 0, (1 << 13) | (29 << 8) | (15 << 3), 0},
-	{0},
-};
-
-static void dib0090_set_trim(struct dib0090_state *state)
-{
-	u16 *val;
-
-	if (state->dc->addr == 0x07)
-		val = &state->bb7;
-	else
-		val = &state->bb6;
-
-	*val &= ~(0x1f << state->dc->offset);
-	*val |= state->step << state->dc->offset;
-
-	dib0090_write_reg(state, state->dc->addr, *val);
-}
-
-static int dib0090_dc_offset_calibration(struct dib0090_state *state, enum frontend_tune_state *tune_state)
-{
-	int ret = 0;
-	u16 reg;
-
-	switch (*tune_state) {
-	case CT_TUNER_START:
-		dprintk("Start DC offset calibration");
-
-		/* force vcm2 = 0.8V */
-		state->bb6 = 0;
-		state->bb7 = 0x040d;
-
-		/* the LNA AND LO are off */
-		reg = dib0090_read_reg(state, 0x24) & 0x0ffb;	/* shutdown lna and lo */
-		dib0090_write_reg(state, 0x24, reg);
-
-		state->wbdmux = dib0090_read_reg(state, 0x10);
-		dib0090_write_reg(state, 0x10, (state->wbdmux & ~(0xff << 3)) | (0x7 << 3) | 0x3);
-		dib0090_write_reg(state, 0x23, dib0090_read_reg(state, 0x23) & ~(1 << 14));
-
-		state->dc = dc_table;
-
-		if (state->identity.p1g)
-			state->dc = dc_p1g_table;
-		*tune_state = CT_TUNER_STEP_0;
-
-		/* fall through */
-
-	case CT_TUNER_STEP_0:
-		dprintk("Sart/continue DC calibration for %s path", (state->dc->i == 1) ? "I" : "Q");
-		dib0090_write_reg(state, 0x01, state->dc->bb1);
-		dib0090_write_reg(state, 0x07, state->bb7 | (state->dc->i << 7));
-
-		state->step = 0;
-		state->min_adc_diff = 1023;
-		*tune_state = CT_TUNER_STEP_1;
-		ret = 50;
-		break;
-
-	case CT_TUNER_STEP_1:
-		dib0090_set_trim(state);
-		*tune_state = CT_TUNER_STEP_2;
-		break;
-
-	case CT_TUNER_STEP_2:
-	case CT_TUNER_STEP_3:
-	case CT_TUNER_STEP_4:
-		ret = dib0090_get_offset(state, tune_state);
-		break;
-
-	case CT_TUNER_STEP_5:	/* found an offset */
-		dprintk("adc_diff = %d, current step= %d", (u32) state->adc_diff, state->step);
-		if (state->step == 0 && state->adc_diff < 0) {
-			state->min_adc_diff = -1023;
-			dprintk("Change of sign of the minimum adc diff");
-		}
-
-		dprintk("adc_diff = %d, min_adc_diff = %d current_step = %d", state->adc_diff, state->min_adc_diff, state->step);
-
-		/* first turn for this frequency */
-		if (state->step == 0) {
-			if (state->dc->pga && state->adc_diff < 0)
-				state->step = 0x10;
-			if (state->dc->pga == 0 && state->adc_diff > 0)
-				state->step = 0x10;
-		}
-
-		/* Look for a change of Sign in the Adc_diff.min_adc_diff is used to STORE the setp N-1 */
-		if ((state->adc_diff & 0x8000) == (state->min_adc_diff & 0x8000) && steps(state->step) < 15) {
-			/* stop search when the delta the sign is changing and Steps =15 and Step=0 is force for continuance */
-			state->step++;
-			state->min_adc_diff = state->adc_diff;
-			*tune_state = CT_TUNER_STEP_1;
-		} else {
-			/* the minimum was what we have seen in the step before */
-			if (ABS(state->adc_diff) > ABS(state->min_adc_diff)) {
-				dprintk("Since adc_diff N = %d  > adc_diff step N-1 = %d, Come back one step", state->adc_diff, state->min_adc_diff);
-				state->step--;
-			}
-
-			dib0090_set_trim(state);
-			dprintk("BB Offset Cal, BBreg=%hd,Offset=%hd,Value Set=%hd", state->dc->addr, state->adc_diff, state->step);
-
-			state->dc++;
-			if (state->dc->addr == 0)	/* done */
-				*tune_state = CT_TUNER_STEP_6;
-			else
-				*tune_state = CT_TUNER_STEP_0;
-
-		}
-		break;
-
-	case CT_TUNER_STEP_6:
-		dib0090_write_reg(state, 0x07, state->bb7 & ~0x0008);
-		dib0090_write_reg(state, 0x1f, 0x7);
-		*tune_state = CT_TUNER_START;	/* reset done -> real tuning can now begin */
-		state->calibrate &= ~DC_CAL;
-	default:
-		break;
-	}
-	return ret;
-}
-
-static int dib0090_wbd_calibration(struct dib0090_state *state, enum frontend_tune_state *tune_state)
-{
-	u8 wbd_gain;
-	const struct dib0090_wbd_slope *wbd = state->current_wbd_table;
-
-	switch (*tune_state) {
-	case CT_TUNER_START:
-		while (state->current_rf / 1000 > wbd->max_freq)
-			wbd++;
-		if (wbd->wbd_gain != 0)
-			wbd_gain = wbd->wbd_gain;
-		else {
-			wbd_gain = 4;
-#if defined(CONFIG_BAND_LBAND) || defined(CONFIG_BAND_SBAND)
-			if ((state->current_band == BAND_LBAND) || (state->current_band == BAND_SBAND))
-				wbd_gain = 2;
-#endif
-		}
-
-		if (wbd_gain == state->wbd_calibration_gain) {	/* the WBD calibration has already been done */
-			*tune_state = CT_TUNER_START;
-			state->calibrate &= ~WBD_CAL;
-			return 0;
-		}
-
-		dib0090_write_reg(state, 0x10, 0x1b81 | (1 << 10) | (wbd_gain << 13) | (1 << 3));
-
-		dib0090_write_reg(state, 0x24, ((EN_UHF & 0x0fff) | (1 << 1)));
-		*tune_state = CT_TUNER_STEP_0;
-		state->wbd_calibration_gain = wbd_gain;
-		return 90;	/* wait for the WBDMUX to switch and for the ADC to sample */
-
-	case CT_TUNER_STEP_0:
-		state->wbd_offset = dib0090_get_slow_adc_val(state);
-		dprintk("WBD calibration offset = %d", state->wbd_offset);
-		*tune_state = CT_TUNER_START;	/* reset done -> real tuning can now begin */
-		state->calibrate &= ~WBD_CAL;
-		break;
-
-	default:
-		break;
-	}
-	return 0;
-}
-
-static void dib0090_set_bandwidth(struct dib0090_state *state)
-{
-	u16 tmp;
-
-	if (state->fe->dtv_property_cache.bandwidth_hz / 1000 <= 5000)
-		tmp = (3 << 14);
-	else if (state->fe->dtv_property_cache.bandwidth_hz / 1000 <= 6000)
-		tmp = (2 << 14);
-	else if (state->fe->dtv_property_cache.bandwidth_hz / 1000 <= 7000)
-		tmp = (1 << 14);
-	else
-		tmp = (0 << 14);
-
-	state->bb_1_def &= 0x3fff;
-	state->bb_1_def |= tmp;
-
-	dib0090_write_reg(state, 0x01, state->bb_1_def);	/* be sure that we have the right bb-filter */
-
-	dib0090_write_reg(state, 0x03, 0x6008);	/* = 0x6008 : vcm3_trim = 1 ; filter2_gm1_trim = 8 ; filter2_cutoff_freq = 0 */
-	dib0090_write_reg(state, 0x04, 0x1);	/* 0 = 1KHz ; 1 = 50Hz ; 2 = 150Hz ; 3 = 50KHz ; 4 = servo fast */
-	if (state->identity.in_soc) {
-		dib0090_write_reg(state, 0x05, 0x9bcf); /* attenuator_ibias_tri = 2 ; input_stage_ibias_tr = 1 ; nc = 11 ; ext_gm_trim = 1 ; obuf_ibias_trim = 4 ; filter13_gm2_ibias_t = 15 */
-	} else {
-		dib0090_write_reg(state, 0x02, (5 << 11) | (8 << 6) | (22 & 0x3f));	/* 22 = cap_value */
-		dib0090_write_reg(state, 0x05, 0xabcd);	/* = 0xabcd : attenuator_ibias_tri = 2 ; input_stage_ibias_tr = 2 ; nc = 11 ; ext_gm_trim = 1 ; obuf_ibias_trim = 4 ; filter13_gm2_ibias_t = 13 */
-	}
-}
-
-static const struct dib0090_pll dib0090_pll_table[] = {
-#ifdef CONFIG_BAND_CBAND
-	{56000, 0, 9, 48, 6},
-	{70000, 1, 9, 48, 6},
-	{87000, 0, 8, 32, 4},
-	{105000, 1, 8, 32, 4},
-	{115000, 0, 7, 24, 6},
-	{140000, 1, 7, 24, 6},
-	{170000, 0, 6, 16, 4},
-#endif
-#ifdef CONFIG_BAND_VHF
-	{200000, 1, 6, 16, 4},
-	{230000, 0, 5, 12, 6},
-	{280000, 1, 5, 12, 6},
-	{340000, 0, 4, 8, 4},
-	{380000, 1, 4, 8, 4},
-	{450000, 0, 3, 6, 6},
-#endif
-#ifdef CONFIG_BAND_UHF
-	{580000, 1, 3, 6, 6},
-	{700000, 0, 2, 4, 4},
-	{860000, 1, 2, 4, 4},
-#endif
-#ifdef CONFIG_BAND_LBAND
-	{1800000, 1, 0, 2, 4},
-#endif
-#ifdef CONFIG_BAND_SBAND
-	{2900000, 0, 14, 1, 4},
-#endif
-};
-
-static const struct dib0090_tuning dib0090_tuning_table_fm_vhf_on_cband[] = {
-
-#ifdef CONFIG_BAND_CBAND
-	{184000, 4, 1, 15, 0x280, 0x2912, 0xb94e, EN_CAB},
-	{227000, 4, 3, 15, 0x280, 0x2912, 0xb94e, EN_CAB},
-	{380000, 4, 7, 15, 0x280, 0x2912, 0xb94e, EN_CAB},
-#endif
-#ifdef CONFIG_BAND_UHF
-	{520000, 2, 0, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{550000, 2, 2, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{650000, 2, 3, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{750000, 2, 5, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{850000, 2, 6, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{900000, 2, 7, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-#endif
-#ifdef CONFIG_BAND_LBAND
-	{1500000, 4, 0, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
-	{1600000, 4, 1, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
-	{1800000, 4, 3, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
-#endif
-#ifdef CONFIG_BAND_SBAND
-	{2300000, 1, 4, 20, 0x300, 0x2d2A, 0x82c7, EN_SBD},
-	{2900000, 1, 7, 20, 0x280, 0x2deb, 0x8347, EN_SBD},
-#endif
-};
-
-static const struct dib0090_tuning dib0090_tuning_table[] = {
-
-#ifdef CONFIG_BAND_CBAND
-	{170000, 4, 1, 15, 0x280, 0x2912, 0xb94e, EN_CAB},
-#endif
-#ifdef CONFIG_BAND_VHF
-	{184000, 1, 1, 15, 0x300, 0x4d12, 0xb94e, EN_VHF},
-	{227000, 1, 3, 15, 0x300, 0x4d12, 0xb94e, EN_VHF},
-	{380000, 1, 7, 15, 0x300, 0x4d12, 0xb94e, EN_VHF},
-#endif
-#ifdef CONFIG_BAND_UHF
-	{520000, 2, 0, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{550000, 2, 2, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{650000, 2, 3, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{750000, 2, 5, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{850000, 2, 6, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{900000, 2, 7, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-#endif
-#ifdef CONFIG_BAND_LBAND
-	{1500000, 4, 0, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
-	{1600000, 4, 1, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
-	{1800000, 4, 3, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
-#endif
-#ifdef CONFIG_BAND_SBAND
-	{2300000, 1, 4, 20, 0x300, 0x2d2A, 0x82c7, EN_SBD},
-	{2900000, 1, 7, 20, 0x280, 0x2deb, 0x8347, EN_SBD},
-#endif
-};
-
-static const struct dib0090_tuning dib0090_p1g_tuning_table[] = {
-#ifdef CONFIG_BAND_CBAND
-	{170000, 4, 1, 0x820f, 0x300, 0x2d22, 0x82cb, EN_CAB},
-#endif
-#ifdef CONFIG_BAND_VHF
-	{184000, 1, 1, 15, 0x300, 0x4d12, 0xb94e, EN_VHF},
-	{227000, 1, 3, 15, 0x300, 0x4d12, 0xb94e, EN_VHF},
-	{380000, 1, 7, 15, 0x300, 0x4d12, 0xb94e, EN_VHF},
-#endif
-#ifdef CONFIG_BAND_UHF
-	{510000, 2, 0, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{540000, 2, 1, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{600000, 2, 3, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{630000, 2, 4, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{680000, 2, 5, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{720000, 2, 6, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{900000, 2, 7, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-#endif
-#ifdef CONFIG_BAND_LBAND
-	{1500000, 4, 0, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
-	{1600000, 4, 1, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
-	{1800000, 4, 3, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
-#endif
-#ifdef CONFIG_BAND_SBAND
-	{2300000, 1, 4, 20, 0x300, 0x2d2A, 0x82c7, EN_SBD},
-	{2900000, 1, 7, 20, 0x280, 0x2deb, 0x8347, EN_SBD},
-#endif
-};
-
-static const struct dib0090_pll dib0090_p1g_pll_table[] = {
-#ifdef CONFIG_BAND_CBAND
-	{57000, 0, 11, 48, 6},
-	{70000, 1, 11, 48, 6},
-	{86000, 0, 10, 32, 4},
-	{105000, 1, 10, 32, 4},
-	{115000, 0, 9, 24, 6},
-	{140000, 1, 9, 24, 6},
-	{170000, 0, 8, 16, 4},
-#endif
-#ifdef CONFIG_BAND_VHF
-	{200000, 1, 8, 16, 4},
-	{230000, 0, 7, 12, 6},
-	{280000, 1, 7, 12, 6},
-	{340000, 0, 6, 8, 4},
-	{380000, 1, 6, 8, 4},
-	{455000, 0, 5, 6, 6},
-#endif
-#ifdef CONFIG_BAND_UHF
-	{580000, 1, 5, 6, 6},
-	{680000, 0, 4, 4, 4},
-	{860000, 1, 4, 4, 4},
-#endif
-#ifdef CONFIG_BAND_LBAND
-	{1800000, 1, 2, 2, 4},
-#endif
-#ifdef CONFIG_BAND_SBAND
-	{2900000, 0, 1, 1, 6},
-#endif
-};
-
-static const struct dib0090_tuning dib0090_p1g_tuning_table_fm_vhf_on_cband[] = {
-#ifdef CONFIG_BAND_CBAND
-	{184000, 4, 3, 0x4187, 0x2c0, 0x2d22, 0x81cb, EN_CAB},
-	{227000, 4, 3, 0x4187, 0x2c0, 0x2d22, 0x81cb, EN_CAB},
-	{380000, 4, 3, 0x4187, 0x2c0, 0x2d22, 0x81cb, EN_CAB},
-#endif
-#ifdef CONFIG_BAND_UHF
-	{520000, 2, 0, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{550000, 2, 2, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{650000, 2, 3, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{750000, 2, 5, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{850000, 2, 6, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-	{900000, 2, 7, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
-#endif
-#ifdef CONFIG_BAND_LBAND
-	{1500000, 4, 0, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
-	{1600000, 4, 1, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
-	{1800000, 4, 3, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
-#endif
-#ifdef CONFIG_BAND_SBAND
-	{2300000, 1, 4, 20, 0x300, 0x2d2A, 0x82c7, EN_SBD},
-	{2900000, 1, 7, 20, 0x280, 0x2deb, 0x8347, EN_SBD},
-#endif
-};
-
-static const struct dib0090_tuning dib0090_tuning_table_cband_7090[] = {
-#ifdef CONFIG_BAND_CBAND
-	{300000, 4, 3, 0x018F, 0x2c0, 0x2d22, 0xb9ce, EN_CAB},
-	{380000, 4, 10, 0x018F, 0x2c0, 0x2d22, 0xb9ce, EN_CAB},
-	{570000, 4, 10, 0x8190, 0x2c0, 0x2d22, 0xb9ce, EN_CAB},
-	{858000, 4, 5, 0x8190, 0x2c0, 0x2d22, 0xb9ce, EN_CAB},
-#endif
-};
-
-static const struct dib0090_tuning dib0090_tuning_table_cband_7090e_sensitivity[] = {
-#ifdef CONFIG_BAND_CBAND
-	{ 300000,  0 ,  3,  0x8105, 0x2c0, 0x2d12, 0xb84e, EN_CAB },
-	{ 380000,  0 ,  10, 0x810F, 0x2c0, 0x2d12, 0xb84e, EN_CAB },
-	{ 600000,  0 ,  10, 0x815E, 0x280, 0x2d12, 0xb84e, EN_CAB },
-	{ 660000,  0 ,  5,  0x85E3, 0x280, 0x2d12, 0xb84e, EN_CAB },
-	{ 720000,  0 ,  5,  0x852E, 0x280, 0x2d12, 0xb84e, EN_CAB },
-	{ 860000,  0 ,  4,  0x85E5, 0x280, 0x2d12, 0xb84e, EN_CAB },
-#endif
-};
-
-int dib0090_update_tuning_table_7090(struct dvb_frontend *fe,
-		u8 cfg_sensitivity)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-	const struct dib0090_tuning *tune =
-		dib0090_tuning_table_cband_7090e_sensitivity;
-	const struct dib0090_tuning dib0090_tuning_table_cband_7090e_aci[] = {
-		{ 300000,  0 ,  3,  0x8165, 0x2c0, 0x2d12, 0xb84e, EN_CAB },
-		{ 650000,  0 ,  4,  0x815B, 0x280, 0x2d12, 0xb84e, EN_CAB },
-		{ 860000,  0 ,  5,  0x84EF, 0x280, 0x2d12, 0xb84e, EN_CAB },
-	};
-
-	if ((!state->identity.p1g) || (!state->identity.in_soc)
-			|| ((state->identity.version != SOC_7090_P1G_21R1)
-				&& (state->identity.version != SOC_7090_P1G_11R1))) {
-		dprintk("%s() function can only be used for dib7090", __func__);
-		return -ENODEV;
-	}
-
-	if (cfg_sensitivity)
-		tune = dib0090_tuning_table_cband_7090e_sensitivity;
-	else
-		tune = dib0090_tuning_table_cband_7090e_aci;
-
-	while (state->rf_request > tune->max_freq)
-		tune++;
-
-	dib0090_write_reg(state, 0x09, (dib0090_read_reg(state, 0x09) & 0x8000)
-			| (tune->lna_bias & 0x7fff));
-	dib0090_write_reg(state, 0x0b, (dib0090_read_reg(state, 0x0b) & 0xf83f)
-			| ((tune->lna_tune << 6) & 0x07c0));
-	return 0;
-}
-EXPORT_SYMBOL(dib0090_update_tuning_table_7090);
-
-static int dib0090_captrim_search(struct dib0090_state *state, enum frontend_tune_state *tune_state)
-{
-	int ret = 0;
-	u16 lo4 = 0xe900;
-
-	s16 adc_target;
-	u16 adc;
-	s8 step_sign;
-	u8 force_soft_search = 0;
-
-	if (state->identity.version == SOC_8090_P1G_11R1 || state->identity.version == SOC_8090_P1G_21R1)
-		force_soft_search = 1;
-
-	if (*tune_state == CT_TUNER_START) {
-		dprintk("Start Captrim search : %s", (force_soft_search == 1) ? "FORCE SOFT SEARCH" : "AUTO");
-		dib0090_write_reg(state, 0x10, 0x2B1);
-		dib0090_write_reg(state, 0x1e, 0x0032);
-
-		if (!state->tuner_is_tuned) {
-			/* prepare a complete captrim */
-			if (!state->identity.p1g || force_soft_search)
-				state->step = state->captrim = state->fcaptrim = 64;
-
-			state->current_rf = state->rf_request;
-		} else {	/* we are already tuned to this frequency - the configuration is correct  */
-			if (!state->identity.p1g || force_soft_search) {
-				/* do a minimal captrim even if the frequency has not changed */
-				state->step = 4;
-				state->captrim = state->fcaptrim = dib0090_read_reg(state, 0x18) & 0x7f;
-			}
-		}
-		state->adc_diff = 3000;
-		*tune_state = CT_TUNER_STEP_0;
-
-	} else if (*tune_state == CT_TUNER_STEP_0) {
-		if (state->identity.p1g && !force_soft_search) {
-			u8 ratio = 31;
-
-			dib0090_write_reg(state, 0x40, (3 << 7) | (ratio << 2) | (1 << 1) | 1);
-			dib0090_read_reg(state, 0x40);
-			ret = 50;
-		} else {
-			state->step /= 2;
-			dib0090_write_reg(state, 0x18, lo4 | state->captrim);
-
-			if (state->identity.in_soc)
-				ret = 25;
-		}
-		*tune_state = CT_TUNER_STEP_1;
-
-	} else if (*tune_state == CT_TUNER_STEP_1) {
-		if (state->identity.p1g && !force_soft_search) {
-			dib0090_write_reg(state, 0x40, 0x18c | (0 << 1) | 0);
-			dib0090_read_reg(state, 0x40);
-
-			state->fcaptrim = dib0090_read_reg(state, 0x18) & 0x7F;
-			dprintk("***Final Captrim= 0x%x", state->fcaptrim);
-			*tune_state = CT_TUNER_STEP_3;
-
-		} else {
-			/* MERGE for all krosus before P1G */
-			adc = dib0090_get_slow_adc_val(state);
-			dprintk("CAPTRIM=%d; ADC = %d (ADC) & %dmV", (u32) state->captrim, (u32) adc, (u32) (adc) * (u32) 1800 / (u32) 1024);
-
-			if (state->rest == 0 || state->identity.in_soc) {	/* Just for 8090P SOCS where auto captrim HW bug : TO CHECK IN ACI for SOCS !!! if 400 for 8090p SOC => tune issue !!! */
-				adc_target = 200;
-			} else
-				adc_target = 400;
-
-			if (adc >= adc_target) {
-				adc -= adc_target;
-				step_sign = -1;
-			} else {
-				adc = adc_target - adc;
-				step_sign = 1;
-			}
-
-			if (adc < state->adc_diff) {
-				dprintk("CAPTRIM=%d is closer to target (%d/%d)", (u32) state->captrim, (u32) adc, (u32) state->adc_diff);
-				state->adc_diff = adc;
-				state->fcaptrim = state->captrim;
-			}
-
-			state->captrim += step_sign * state->step;
-			if (state->step >= 1)
-				*tune_state = CT_TUNER_STEP_0;
-			else
-				*tune_state = CT_TUNER_STEP_2;
-
-			ret = 25;
-		}
-	} else if (*tune_state == CT_TUNER_STEP_2) {	/* this step is only used by krosus < P1G */
-		/*write the final cptrim config */
-		dib0090_write_reg(state, 0x18, lo4 | state->fcaptrim);
-
-		*tune_state = CT_TUNER_STEP_3;
-
-	} else if (*tune_state == CT_TUNER_STEP_3) {
-		state->calibrate &= ~CAPTRIM_CAL;
-		*tune_state = CT_TUNER_STEP_0;
-	}
-
-	return ret;
-}
-
-static int dib0090_get_temperature(struct dib0090_state *state, enum frontend_tune_state *tune_state)
-{
-	int ret = 15;
-	s16 val;
-
-	switch (*tune_state) {
-	case CT_TUNER_START:
-		state->wbdmux = dib0090_read_reg(state, 0x10);
-		dib0090_write_reg(state, 0x10, (state->wbdmux & ~(0xff << 3)) | (0x8 << 3));
-
-		state->bias = dib0090_read_reg(state, 0x13);
-		dib0090_write_reg(state, 0x13, state->bias | (0x3 << 8));
-
-		*tune_state = CT_TUNER_STEP_0;
-		/* wait for the WBDMUX to switch and for the ADC to sample */
-		break;
-
-	case CT_TUNER_STEP_0:
-		state->adc_diff = dib0090_get_slow_adc_val(state);
-		dib0090_write_reg(state, 0x13, (state->bias & ~(0x3 << 8)) | (0x2 << 8));
-		*tune_state = CT_TUNER_STEP_1;
-		break;
-
-	case CT_TUNER_STEP_1:
-		val = dib0090_get_slow_adc_val(state);
-		state->temperature = ((s16) ((val - state->adc_diff) * 180) >> 8) + 55;
-
-		dprintk("temperature: %d C", state->temperature - 30);
-
-		*tune_state = CT_TUNER_STEP_2;
-		break;
-
-	case CT_TUNER_STEP_2:
-		dib0090_write_reg(state, 0x13, state->bias);
-		dib0090_write_reg(state, 0x10, state->wbdmux);	/* write back original WBDMUX */
-
-		*tune_state = CT_TUNER_START;
-		state->calibrate &= ~TEMP_CAL;
-		if (state->config->analog_output == 0)
-			dib0090_write_reg(state, 0x23, dib0090_read_reg(state, 0x23) | (1 << 14));
-
-		break;
-
-	default:
-		ret = 0;
-		break;
-	}
-	return ret;
-}
-
-#define WBD     0x781		/* 1 1 1 1 0000 0 0 1 */
-static int dib0090_tune(struct dvb_frontend *fe)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-	const struct dib0090_tuning *tune = state->current_tune_table_index;
-	const struct dib0090_pll *pll = state->current_pll_table_index;
-	enum frontend_tune_state *tune_state = &state->tune_state;
-
-	u16 lo5, lo6, Den, tmp;
-	u32 FBDiv, Rest, FREF, VCOF_kHz = 0;
-	int ret = 10;		/* 1ms is the default delay most of the time */
-	u8 c, i;
-
-	/************************* VCO ***************************/
-	/* Default values for FG                                 */
-	/* from these are needed :                               */
-	/* Cp,HFdiv,VCOband,SD,Num,Den,FB and REFDiv             */
-
-	/* in any case we first need to do a calibration if needed */
-	if (*tune_state == CT_TUNER_START) {
-		/* deactivate DataTX before some calibrations */
-		if (state->calibrate & (DC_CAL | TEMP_CAL | WBD_CAL))
-			dib0090_write_reg(state, 0x23, dib0090_read_reg(state, 0x23) & ~(1 << 14));
-		else
-			/* Activate DataTX in case a calibration has been done before */
-			if (state->config->analog_output == 0)
-				dib0090_write_reg(state, 0x23, dib0090_read_reg(state, 0x23) | (1 << 14));
-	}
-
-	if (state->calibrate & DC_CAL)
-		return dib0090_dc_offset_calibration(state, tune_state);
-	else if (state->calibrate & WBD_CAL) {
-		if (state->current_rf == 0)
-			state->current_rf = state->fe->dtv_property_cache.frequency / 1000;
-		return dib0090_wbd_calibration(state, tune_state);
-	} else if (state->calibrate & TEMP_CAL)
-		return dib0090_get_temperature(state, tune_state);
-	else if (state->calibrate & CAPTRIM_CAL)
-		return dib0090_captrim_search(state, tune_state);
-
-	if (*tune_state == CT_TUNER_START) {
-		/* if soc and AGC pwm control, disengage mux to be able to R/W access to 0x01 register to set the right filter (cutoff_freq_select) during the tune sequence, otherwise, SOC SERPAR error when accessing to 0x01 */
-		if (state->config->use_pwm_agc && state->identity.in_soc) {
-			tmp = dib0090_read_reg(state, 0x39);
-			if ((tmp >> 10) & 0x1)
-				dib0090_write_reg(state, 0x39, tmp & ~(1 << 10));
-		}
-
-		state->current_band = (u8) BAND_OF_FREQUENCY(state->fe->dtv_property_cache.frequency / 1000);
-		state->rf_request =
-			state->fe->dtv_property_cache.frequency / 1000 + (state->current_band ==
-					BAND_UHF ? state->config->freq_offset_khz_uhf : state->config->
-					freq_offset_khz_vhf);
-
-		/* in ISDB-T 1seg we shift tuning frequency */
-		if ((state->fe->dtv_property_cache.delivery_system == SYS_ISDBT && state->fe->dtv_property_cache.isdbt_sb_mode == 1
-					&& state->fe->dtv_property_cache.isdbt_partial_reception == 0)) {
-			const struct dib0090_low_if_offset_table *LUT_offset = state->config->low_if;
-			u8 found_offset = 0;
-			u32 margin_khz = 100;
-
-			if (LUT_offset != NULL) {
-				while (LUT_offset->RF_freq != 0xffff) {
-					if (((state->rf_request > (LUT_offset->RF_freq - margin_khz))
-								&& (state->rf_request < (LUT_offset->RF_freq + margin_khz)))
-							&& LUT_offset->std == state->fe->dtv_property_cache.delivery_system) {
-						state->rf_request += LUT_offset->offset_khz;
-						found_offset = 1;
-						break;
-					}
-					LUT_offset++;
-				}
-			}
-
-			if (found_offset == 0)
-				state->rf_request += 400;
-		}
-		if (state->current_rf != state->rf_request || (state->current_standard != state->fe->dtv_property_cache.delivery_system)) {
-			state->tuner_is_tuned = 0;
-			state->current_rf = 0;
-			state->current_standard = 0;
-
-			tune = dib0090_tuning_table;
-			if (state->identity.p1g)
-				tune = dib0090_p1g_tuning_table;
-
-			tmp = (state->identity.version >> 5) & 0x7;
-
-			if (state->identity.in_soc) {
-				if (state->config->force_cband_input) {	/* Use the CBAND input for all band */
-					if (state->current_band & BAND_CBAND || state->current_band & BAND_FM || state->current_band & BAND_VHF
-							|| state->current_band & BAND_UHF) {
-						state->current_band = BAND_CBAND;
-						if (state->config->is_dib7090e)
-							tune = dib0090_tuning_table_cband_7090e_sensitivity;
-						else
-							tune = dib0090_tuning_table_cband_7090;
-					}
-				} else {	/* Use the CBAND input for all band under UHF */
-					if (state->current_band & BAND_CBAND || state->current_band & BAND_FM || state->current_band & BAND_VHF) {
-						state->current_band = BAND_CBAND;
-						if (state->config->is_dib7090e)
-							tune = dib0090_tuning_table_cband_7090e_sensitivity;
-						else
-							tune = dib0090_tuning_table_cband_7090;
-					}
-				}
-			} else
-			 if (tmp == 0x4 || tmp == 0x7) {
-				/* CBAND tuner version for VHF */
-				if (state->current_band == BAND_FM || state->current_band == BAND_CBAND || state->current_band == BAND_VHF) {
-					state->current_band = BAND_CBAND;	/* Force CBAND */
-
-					tune = dib0090_tuning_table_fm_vhf_on_cband;
-					if (state->identity.p1g)
-						tune = dib0090_p1g_tuning_table_fm_vhf_on_cband;
-				}
-			}
-
-			pll = dib0090_pll_table;
-			if (state->identity.p1g)
-				pll = dib0090_p1g_pll_table;
-
-			/* Look for the interval */
-			while (state->rf_request > tune->max_freq)
-				tune++;
-			while (state->rf_request > pll->max_freq)
-				pll++;
-
-			state->current_tune_table_index = tune;
-			state->current_pll_table_index = pll;
-
-			dib0090_write_reg(state, 0x0b, 0xb800 | (tune->switch_trim));
-
-			VCOF_kHz = (pll->hfdiv * state->rf_request) * 2;
-
-			FREF = state->config->io.clock_khz;
-			if (state->config->fref_clock_ratio != 0)
-				FREF /= state->config->fref_clock_ratio;
-
-			FBDiv = (VCOF_kHz / pll->topresc / FREF);
-			Rest = (VCOF_kHz / pll->topresc) - FBDiv * FREF;
-
-			if (Rest < LPF)
-				Rest = 0;
-			else if (Rest < 2 * LPF)
-				Rest = 2 * LPF;
-			else if (Rest > (FREF - LPF)) {
-				Rest = 0;
-				FBDiv += 1;
-			} else if (Rest > (FREF - 2 * LPF))
-				Rest = FREF - 2 * LPF;
-			Rest = (Rest * 6528) / (FREF / 10);
-			state->rest = Rest;
-
-			/* external loop filter, otherwise:
-			 * lo5 = (0 << 15) | (0 << 12) | (0 << 11) | (3 << 9) | (4 << 6) | (3 << 4) | 4;
-			 * lo6 = 0x0e34 */
-
-			if (Rest == 0) {
-				if (pll->vco_band)
-					lo5 = 0x049f;
-				else
-					lo5 = 0x041f;
-			} else {
-				if (pll->vco_band)
-					lo5 = 0x049e;
-				else if (state->config->analog_output)
-					lo5 = 0x041d;
-				else
-					lo5 = 0x041c;
-			}
-
-			if (state->identity.p1g) {	/* Bias is done automatically in P1G */
-				if (state->identity.in_soc) {
-					if (state->identity.version == SOC_8090_P1G_11R1)
-						lo5 = 0x46f;
-					else
-						lo5 = 0x42f;
-				} else
-					lo5 = 0x42c;
-			}
-
-			lo5 |= (pll->hfdiv_code << 11) | (pll->vco_band << 7);	/* bit 15 is the split to the slave, we do not do it here */
-
-			if (!state->config->io.pll_int_loop_filt) {
-				if (state->identity.in_soc)
-					lo6 = 0xff98;
-				else if (state->identity.p1g || (Rest == 0))
-					lo6 = 0xfff8;
-				else
-					lo6 = 0xff28;
-			} else
-				lo6 = (state->config->io.pll_int_loop_filt << 3);
-
-			Den = 1;
-
-			if (Rest > 0) {
-				if (state->config->analog_output)
-					lo6 |= (1 << 2) | 2;
-				else {
-					if (state->identity.in_soc)
-						lo6 |= (1 << 2) | 2;
-					else
-						lo6 |= (1 << 2) | 2;
-				}
-				Den = 255;
-			}
-			dib0090_write_reg(state, 0x15, (u16) FBDiv);
-			if (state->config->fref_clock_ratio != 0)
-				dib0090_write_reg(state, 0x16, (Den << 8) | state->config->fref_clock_ratio);
-			else
-				dib0090_write_reg(state, 0x16, (Den << 8) | 1);
-			dib0090_write_reg(state, 0x17, (u16) Rest);
-			dib0090_write_reg(state, 0x19, lo5);
-			dib0090_write_reg(state, 0x1c, lo6);
-
-			lo6 = tune->tuner_enable;
-			if (state->config->analog_output)
-				lo6 = (lo6 & 0xff9f) | 0x2;
-
-			dib0090_write_reg(state, 0x24, lo6 | EN_LO | state->config->use_pwm_agc * EN_CRYSTAL);
-
-		}
-
-		state->current_rf = state->rf_request;
-		state->current_standard = state->fe->dtv_property_cache.delivery_system;
-
-		ret = 20;
-		state->calibrate = CAPTRIM_CAL;	/* captrim serach now */
-	}
-
-	else if (*tune_state == CT_TUNER_STEP_0) {	/* Warning : because of captrim cal, if you change this step, change it also in _cal.c file because it is the step following captrim cal state machine */
-		const struct dib0090_wbd_slope *wbd = state->current_wbd_table;
-
-		while (state->current_rf / 1000 > wbd->max_freq)
-			wbd++;
-
-		dib0090_write_reg(state, 0x1e, 0x07ff);
-		dprintk("Final Captrim: %d", (u32) state->fcaptrim);
-		dprintk("HFDIV code: %d", (u32) pll->hfdiv_code);
-		dprintk("VCO = %d", (u32) pll->vco_band);
-		dprintk("VCOF in kHz: %d ((%d*%d) << 1))", (u32) ((pll->hfdiv * state->rf_request) * 2), (u32) pll->hfdiv, (u32) state->rf_request);
-		dprintk("REFDIV: %d, FREF: %d", (u32) 1, (u32) state->config->io.clock_khz);
-		dprintk("FBDIV: %d, Rest: %d", (u32) dib0090_read_reg(state, 0x15), (u32) dib0090_read_reg(state, 0x17));
-		dprintk("Num: %d, Den: %d, SD: %d", (u32) dib0090_read_reg(state, 0x17), (u32) (dib0090_read_reg(state, 0x16) >> 8),
-			(u32) dib0090_read_reg(state, 0x1c) & 0x3);
-
-#define WBD     0x781		/* 1 1 1 1 0000 0 0 1 */
-		c = 4;
-		i = 3;
-
-		if (wbd->wbd_gain != 0)
-			c = wbd->wbd_gain;
-
-		state->wbdmux = (c << 13) | (i << 11) | (WBD | (state->config->use_pwm_agc << 1));
-		dib0090_write_reg(state, 0x10, state->wbdmux);
-
-		if ((tune->tuner_enable == EN_CAB) && state->identity.p1g) {
-			dprintk("P1G : The cable band is selected and lna_tune = %d", tune->lna_tune);
-			dib0090_write_reg(state, 0x09, tune->lna_bias);
-			dib0090_write_reg(state, 0x0b, 0xb800 | (tune->lna_tune << 6) | (tune->switch_trim));
-		} else
-			dib0090_write_reg(state, 0x09, (tune->lna_tune << 5) | tune->lna_bias);
-
-		dib0090_write_reg(state, 0x0c, tune->v2i);
-		dib0090_write_reg(state, 0x0d, tune->mix);
-		dib0090_write_reg(state, 0x0e, tune->load);
-		*tune_state = CT_TUNER_STEP_1;
-
-	} else if (*tune_state == CT_TUNER_STEP_1) {
-		/* initialize the lt gain register */
-		state->rf_lt_def = 0x7c00;
-
-		dib0090_set_bandwidth(state);
-		state->tuner_is_tuned = 1;
-
-		state->calibrate |= WBD_CAL;
-		state->calibrate |= TEMP_CAL;
-		*tune_state = CT_TUNER_STOP;
-	} else
-		ret = FE_CALLBACK_TIME_NEVER;
-	return ret;
-}
-
-static int dib0090_release(struct dvb_frontend *fe)
-{
-	kfree(fe->tuner_priv);
-	fe->tuner_priv = NULL;
-	return 0;
-}
-
-enum frontend_tune_state dib0090_get_tune_state(struct dvb_frontend *fe)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-
-	return state->tune_state;
-}
-
-EXPORT_SYMBOL(dib0090_get_tune_state);
-
-int dib0090_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-
-	state->tune_state = tune_state;
-	return 0;
-}
-
-EXPORT_SYMBOL(dib0090_set_tune_state);
-
-static int dib0090_get_frequency(struct dvb_frontend *fe, u32 * frequency)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-
-	*frequency = 1000 * state->current_rf;
-	return 0;
-}
-
-static int dib0090_set_params(struct dvb_frontend *fe)
-{
-	struct dib0090_state *state = fe->tuner_priv;
-	u32 ret;
-
-	state->tune_state = CT_TUNER_START;
-
-	do {
-		ret = dib0090_tune(fe);
-		if (ret != FE_CALLBACK_TIME_NEVER)
-			msleep(ret / 10);
-		else
-			break;
-	} while (state->tune_state != CT_TUNER_STOP);
-
-	return 0;
-}
-
-static const struct dvb_tuner_ops dib0090_ops = {
-	.info = {
-		 .name = "DiBcom DiB0090",
-		 .frequency_min = 45000000,
-		 .frequency_max = 860000000,
-		 .frequency_step = 1000,
-		 },
-	.release = dib0090_release,
-
-	.init = dib0090_wakeup,
-	.sleep = dib0090_sleep,
-	.set_params = dib0090_set_params,
-	.get_frequency = dib0090_get_frequency,
-};
-
-static const struct dvb_tuner_ops dib0090_fw_ops = {
-	.info = {
-		 .name = "DiBcom DiB0090",
-		 .frequency_min = 45000000,
-		 .frequency_max = 860000000,
-		 .frequency_step = 1000,
-		 },
-	.release = dib0090_release,
-
-	.init = NULL,
-	.sleep = NULL,
-	.set_params = NULL,
-	.get_frequency = NULL,
-};
-
-static const struct dib0090_wbd_slope dib0090_wbd_table_default[] = {
-	{470, 0, 250, 0, 100, 4},
-	{860, 51, 866, 21, 375, 4},
-	{1700, 0, 800, 0, 850, 4},
-	{2900, 0, 250, 0, 100, 6},
-	{0xFFFF, 0, 0, 0, 0, 0},
-};
-
-struct dvb_frontend *dib0090_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, const struct dib0090_config *config)
-{
-	struct dib0090_state *st = kzalloc(sizeof(struct dib0090_state), GFP_KERNEL);
-	if (st == NULL)
-		return NULL;
-
-	st->config = config;
-	st->i2c = i2c;
-	st->fe = fe;
-	mutex_init(&st->i2c_buffer_lock);
-	fe->tuner_priv = st;
-
-	if (config->wbd == NULL)
-		st->current_wbd_table = dib0090_wbd_table_default;
-	else
-		st->current_wbd_table = config->wbd;
-
-	if (dib0090_reset(fe) != 0)
-		goto free_mem;
-
-	printk(KERN_INFO "DiB0090: successfully identified\n");
-	memcpy(&fe->ops.tuner_ops, &dib0090_ops, sizeof(struct dvb_tuner_ops));
-
-	return fe;
- free_mem:
-	kfree(st);
-	fe->tuner_priv = NULL;
-	return NULL;
-}
-
-EXPORT_SYMBOL(dib0090_register);
-
-struct dvb_frontend *dib0090_fw_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, const struct dib0090_config *config)
-{
-	struct dib0090_fw_state *st = kzalloc(sizeof(struct dib0090_fw_state), GFP_KERNEL);
-	if (st == NULL)
-		return NULL;
-
-	st->config = config;
-	st->i2c = i2c;
-	st->fe = fe;
-	mutex_init(&st->i2c_buffer_lock);
-	fe->tuner_priv = st;
-
-	if (dib0090_fw_reset_digital(fe, st->config) != 0)
-		goto free_mem;
-
-	dprintk("DiB0090 FW: successfully identified");
-	memcpy(&fe->ops.tuner_ops, &dib0090_fw_ops, sizeof(struct dvb_tuner_ops));
-
-	return fe;
-free_mem:
-	kfree(st);
-	fe->tuner_priv = NULL;
-	return NULL;
-}
-EXPORT_SYMBOL(dib0090_fw_register);
-
-MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
-MODULE_AUTHOR("Olivier Grenie <olivier.grenie@dibcom.fr>");
-MODULE_DESCRIPTION("Driver for the DiBcom 0090 base-band RF Tuner");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/dib0090.h b/drivers/media/dvb/frontends/dib0090.h
deleted file mode 100644
index 781dc49..0000000
--- a/drivers/media/dvb/frontends/dib0090.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * Linux-DVB Driver for DiBcom's DiB0090 base-band RF Tuner.
- *
- * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/)
- *
- * This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- */
-#ifndef DIB0090_H
-#define DIB0090_H
-
-struct dvb_frontend;
-struct i2c_adapter;
-
-#define DEFAULT_DIB0090_I2C_ADDRESS 0x60
-
-struct dib0090_io_config {
-	u32 clock_khz;
-
-	u8 pll_bypass:1;
-	u8 pll_range:1;
-	u8 pll_prediv:6;
-	u8 pll_loopdiv:6;
-
-	u8 adc_clock_ratio;	/* valid is 8, 7 ,6 */
-	u16 pll_int_loop_filt;
-};
-
-struct dib0090_wbd_slope {
-	u16 max_freq;		/* for every frequency less than or equal to that field: this information is correct */
-	u16 slope_cold;
-	u16 offset_cold;
-	u16 slope_hot;
-	u16 offset_hot;
-	u8 wbd_gain;
-};
-
-struct dib0090_low_if_offset_table {
-	int std;
-	u32 RF_freq;
-	s32 offset_khz;
-};
-
-struct dib0090_config {
-	struct dib0090_io_config io;
-	int (*reset) (struct dvb_frontend *, int);
-	int (*sleep) (struct dvb_frontend *, int);
-
-	/*  offset in kHz */
-	int freq_offset_khz_uhf;
-	int freq_offset_khz_vhf;
-
-	int (*get_adc_power) (struct dvb_frontend *);
-
-	u8 clkouttobamse:1;	/* activate or deactivate clock output */
-	u8 analog_output;
-
-	u8 i2c_address;
-	/* add drives and other things if necessary */
-	u16 wbd_vhf_offset;
-	u16 wbd_cband_offset;
-	u8 use_pwm_agc;
-	u8 clkoutdrive;
-
-	u8 ls_cfg_pad_drv;
-	u8 data_tx_drv;
-
-	u8 in_soc;
-	const struct dib0090_low_if_offset_table *low_if;
-	u8 fref_clock_ratio;
-	u16 force_cband_input;
-	struct dib0090_wbd_slope *wbd;
-	u8 is_dib7090e;
-	u8 force_crystal_mode;
-};
-
-#if defined(CONFIG_DVB_TUNER_DIB0090) || (defined(CONFIG_DVB_TUNER_DIB0090_MODULE) && defined(MODULE))
-extern struct dvb_frontend *dib0090_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, const struct dib0090_config *config);
-extern struct dvb_frontend *dib0090_fw_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, const struct dib0090_config *config);
-extern void dib0090_dcc_freq(struct dvb_frontend *fe, u8 fast);
-extern void dib0090_pwm_gain_reset(struct dvb_frontend *fe);
-extern u16 dib0090_get_wbd_target(struct dvb_frontend *tuner);
-extern u16 dib0090_get_wbd_offset(struct dvb_frontend *fe);
-extern int dib0090_gain_control(struct dvb_frontend *fe);
-extern enum frontend_tune_state dib0090_get_tune_state(struct dvb_frontend *fe);
-extern int dib0090_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state);
-extern void dib0090_get_current_gain(struct dvb_frontend *fe, u16 * rf, u16 * bb, u16 * rf_gain_limit, u16 * rflt);
-extern void dib0090_set_dc_servo(struct dvb_frontend *fe, u8 DC_servo_cutoff);
-extern int dib0090_set_switch(struct dvb_frontend *fe, u8 sw1, u8 sw2, u8 sw3);
-extern int dib0090_set_vga(struct dvb_frontend *fe, u8 onoff);
-extern int dib0090_update_rframp_7090(struct dvb_frontend *fe,
-		u8 cfg_sensitivity);
-extern int dib0090_update_tuning_table_7090(struct dvb_frontend *fe,
-		u8 cfg_sensitivity);
-#else
-static inline struct dvb_frontend *dib0090_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, const struct dib0090_config *config)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-static inline struct dvb_frontend *dib0090_fw_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0090_config *config)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-static inline void dib0090_dcc_freq(struct dvb_frontend *fe, u8 fast)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-}
-
-static inline void dib0090_pwm_gain_reset(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-}
-
-static inline u16 dib0090_get_wbd_target(struct dvb_frontend *tuner)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return 0;
-}
-
-static inline u16 dib0090_get_wbd_offset(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return 0;
-}
-
-static inline int dib0090_gain_control(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline enum frontend_tune_state dib0090_get_tune_state(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return CT_DONE;
-}
-
-static inline int dib0090_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline void dib0090_get_current_gain(struct dvb_frontend *fe, u16 * rf, u16 * bb, u16 * rf_gain_limit, u16 * rflt)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-}
-
-static inline void dib0090_set_dc_servo(struct dvb_frontend *fe, u8 DC_servo_cutoff)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-}
-
-static inline int dib0090_set_switch(struct dvb_frontend *fe,
-		u8 sw1, u8 sw2, u8 sw3)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib0090_set_vga(struct dvb_frontend *fe, u8 onoff)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib0090_update_rframp_7090(struct dvb_frontend *fe,
-		u8 cfg_sensitivity)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib0090_update_tuning_table_7090(struct dvb_frontend *fe,
-		u8 cfg_sensitivity)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-#endif
-
-#endif
diff --git a/drivers/media/dvb/frontends/dib3000.h b/drivers/media/dvb/frontends/dib3000.h
deleted file mode 100644
index 404f63a..0000000
--- a/drivers/media/dvb/frontends/dib3000.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * public header file of the frontend drivers for mobile DVB-T demodulators
- * DiBcom 3000M-B and DiBcom 3000P/M-C (http://www.dibcom.fr/)
- *
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
- *
- * based on GPL code from DibCom, which has
- *
- * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr)
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- *
- * Acknowledgements
- *
- *  Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver
- *  sources, on which this driver (and the dvb-dibusb) are based.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- *
- */
-
-#ifndef DIB3000_H
-#define DIB3000_H
-
-#include <linux/dvb/frontend.h>
-
-struct dib3000_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-};
-
-struct dib_fe_xfer_ops
-{
-	/* pid and transfer handling is done in the demodulator */
-	int (*pid_parse)(struct dvb_frontend *fe, int onoff);
-	int (*fifo_ctrl)(struct dvb_frontend *fe, int onoff);
-	int (*pid_ctrl)(struct dvb_frontend *fe, int index, int pid, int onoff);
-	int (*tuner_pass_ctrl)(struct dvb_frontend *fe, int onoff, u8 pll_ctrl);
-};
-
-#if defined(CONFIG_DVB_DIB3000MB) || (defined(CONFIG_DVB_DIB3000MB_MODULE) && defined(MODULE))
-extern struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config,
-					     struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops);
-#else
-static inline struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config,
-					     struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_DIB3000MB
-
-#endif // DIB3000_H
diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb/frontends/dib3000mb.c
deleted file mode 100644
index af91e0c..0000000
--- a/drivers/media/dvb/frontends/dib3000mb.c
+++ /dev/null
@@ -1,829 +0,0 @@
-/*
- * Frontend driver for mobile DVB-T demodulator DiBcom 3000M-B
- * DiBcom (http://www.dibcom.fr/)
- *
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
- *
- * based on GPL code from DibCom, which has
- *
- * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr)
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- *
- * Acknowledgements
- *
- *  Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver
- *  sources, on which this driver (and the dvb-dibusb) are based.
- *
- * see Documentation/dvb/README.dvb-usb for more information
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-
-#include "dib3000.h"
-#include "dib3000mb_priv.h"
-
-/* Version information */
-#define DRIVER_VERSION "0.1"
-#define DRIVER_DESC "DiBcom 3000M-B DVB-T demodulator"
-#define DRIVER_AUTHOR "Patrick Boettcher, patrick.boettcher@desy.de"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,2=xfer,4=setfe,8=getfe (|-able)).");
-
-#define deb_info(args...) dprintk(0x01,args)
-#define deb_i2c(args...)  dprintk(0x02,args)
-#define deb_srch(args...) dprintk(0x04,args)
-#define deb_info(args...) dprintk(0x01,args)
-#define deb_xfer(args...) dprintk(0x02,args)
-#define deb_setf(args...) dprintk(0x04,args)
-#define deb_getf(args...) dprintk(0x08,args)
-
-static int dib3000_read_reg(struct dib3000_state *state, u16 reg)
-{
-	u8 wb[] = { ((reg >> 8) | 0x80) & 0xff, reg & 0xff };
-	u8 rb[2];
-	struct i2c_msg msg[] = {
-		{ .addr = state->config.demod_address, .flags = 0,        .buf = wb, .len = 2 },
-		{ .addr = state->config.demod_address, .flags = I2C_M_RD, .buf = rb, .len = 2 },
-	};
-
-	if (i2c_transfer(state->i2c, msg, 2) != 2)
-		deb_i2c("i2c read error\n");
-
-	deb_i2c("reading i2c bus (reg: %5d 0x%04x, val: %5d 0x%04x)\n",reg,reg,
-			(rb[0] << 8) | rb[1],(rb[0] << 8) | rb[1]);
-
-	return (rb[0] << 8) | rb[1];
-}
-
-static int dib3000_write_reg(struct dib3000_state *state, u16 reg, u16 val)
-{
-	u8 b[] = {
-		(reg >> 8) & 0xff, reg & 0xff,
-		(val >> 8) & 0xff, val & 0xff,
-	};
-	struct i2c_msg msg[] = {
-		{ .addr = state->config.demod_address, .flags = 0, .buf = b, .len = 4 }
-	};
-	deb_i2c("writing i2c bus (reg: %5d 0x%04x, val: %5d 0x%04x)\n",reg,reg,val,val);
-
-	return i2c_transfer(state->i2c,msg, 1) != 1 ? -EREMOTEIO : 0;
-}
-
-static int dib3000_search_status(u16 irq,u16 lock)
-{
-	if (irq & 0x02) {
-		if (lock & 0x01) {
-			deb_srch("auto search succeeded\n");
-			return 1; // auto search succeeded
-		} else {
-			deb_srch("auto search not successful\n");
-			return 0; // auto search failed
-		}
-	} else if (irq & 0x01)  {
-		deb_srch("auto search failed\n");
-		return 0; // auto search failed
-	}
-	return -1; // try again
-}
-
-/* for auto search */
-static u16 dib3000_seq[2][2][2] =     /* fft,gua,   inv   */
-	{ /* fft */
-		{ /* gua */
-			{ 0, 1 },                   /*  0   0   { 0,1 } */
-			{ 3, 9 },                   /*  0   1   { 0,1 } */
-		},
-		{
-			{ 2, 5 },                   /*  1   0   { 0,1 } */
-			{ 6, 11 },                  /*  1   1   { 0,1 } */
-		}
-	};
-
-static int dib3000mb_get_frontend(struct dvb_frontend* fe);
-
-static int dib3000mb_set_frontend(struct dvb_frontend *fe, int tuner)
-{
-	struct dib3000_state* state = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	fe_code_rate_t fe_cr = FEC_NONE;
-	int search_state, seq;
-
-	if (tuner && fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-
-		deb_setf("bandwidth: ");
-		switch (c->bandwidth_hz) {
-			case 8000000:
-				deb_setf("8 MHz\n");
-				wr_foreach(dib3000mb_reg_timing_freq, dib3000mb_timing_freq[2]);
-				wr_foreach(dib3000mb_reg_bandwidth, dib3000mb_bandwidth_8mhz);
-				break;
-			case 7000000:
-				deb_setf("7 MHz\n");
-				wr_foreach(dib3000mb_reg_timing_freq, dib3000mb_timing_freq[1]);
-				wr_foreach(dib3000mb_reg_bandwidth, dib3000mb_bandwidth_7mhz);
-				break;
-			case 6000000:
-				deb_setf("6 MHz\n");
-				wr_foreach(dib3000mb_reg_timing_freq, dib3000mb_timing_freq[0]);
-				wr_foreach(dib3000mb_reg_bandwidth, dib3000mb_bandwidth_6mhz);
-				break;
-			case 0:
-				return -EOPNOTSUPP;
-			default:
-				err("unknown bandwidth value.");
-				return -EINVAL;
-		}
-	}
-	wr(DIB3000MB_REG_LOCK1_MASK, DIB3000MB_LOCK1_SEARCH_4);
-
-	deb_setf("transmission mode: ");
-	switch (c->transmission_mode) {
-		case TRANSMISSION_MODE_2K:
-			deb_setf("2k\n");
-			wr(DIB3000MB_REG_FFT, DIB3000_TRANSMISSION_MODE_2K);
-			break;
-		case TRANSMISSION_MODE_8K:
-			deb_setf("8k\n");
-			wr(DIB3000MB_REG_FFT, DIB3000_TRANSMISSION_MODE_8K);
-			break;
-		case TRANSMISSION_MODE_AUTO:
-			deb_setf("auto\n");
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	deb_setf("guard: ");
-	switch (c->guard_interval) {
-		case GUARD_INTERVAL_1_32:
-			deb_setf("1_32\n");
-			wr(DIB3000MB_REG_GUARD_TIME, DIB3000_GUARD_TIME_1_32);
-			break;
-		case GUARD_INTERVAL_1_16:
-			deb_setf("1_16\n");
-			wr(DIB3000MB_REG_GUARD_TIME, DIB3000_GUARD_TIME_1_16);
-			break;
-		case GUARD_INTERVAL_1_8:
-			deb_setf("1_8\n");
-			wr(DIB3000MB_REG_GUARD_TIME, DIB3000_GUARD_TIME_1_8);
-			break;
-		case GUARD_INTERVAL_1_4:
-			deb_setf("1_4\n");
-			wr(DIB3000MB_REG_GUARD_TIME, DIB3000_GUARD_TIME_1_4);
-			break;
-		case GUARD_INTERVAL_AUTO:
-			deb_setf("auto\n");
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	deb_setf("inversion: ");
-	switch (c->inversion) {
-		case INVERSION_OFF:
-			deb_setf("off\n");
-			wr(DIB3000MB_REG_DDS_INV, DIB3000_DDS_INVERSION_OFF);
-			break;
-		case INVERSION_AUTO:
-			deb_setf("auto ");
-			break;
-		case INVERSION_ON:
-			deb_setf("on\n");
-			wr(DIB3000MB_REG_DDS_INV, DIB3000_DDS_INVERSION_ON);
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	deb_setf("modulation: ");
-	switch (c->modulation) {
-		case QPSK:
-			deb_setf("qpsk\n");
-			wr(DIB3000MB_REG_QAM, DIB3000_CONSTELLATION_QPSK);
-			break;
-		case QAM_16:
-			deb_setf("qam16\n");
-			wr(DIB3000MB_REG_QAM, DIB3000_CONSTELLATION_16QAM);
-			break;
-		case QAM_64:
-			deb_setf("qam64\n");
-			wr(DIB3000MB_REG_QAM, DIB3000_CONSTELLATION_64QAM);
-			break;
-		case QAM_AUTO:
-			break;
-		default:
-			return -EINVAL;
-	}
-	deb_setf("hierarchy: ");
-	switch (c->hierarchy) {
-		case HIERARCHY_NONE:
-			deb_setf("none ");
-			/* fall through */
-		case HIERARCHY_1:
-			deb_setf("alpha=1\n");
-			wr(DIB3000MB_REG_VIT_ALPHA, DIB3000_ALPHA_1);
-			break;
-		case HIERARCHY_2:
-			deb_setf("alpha=2\n");
-			wr(DIB3000MB_REG_VIT_ALPHA, DIB3000_ALPHA_2);
-			break;
-		case HIERARCHY_4:
-			deb_setf("alpha=4\n");
-			wr(DIB3000MB_REG_VIT_ALPHA, DIB3000_ALPHA_4);
-			break;
-		case HIERARCHY_AUTO:
-			deb_setf("alpha=auto\n");
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	deb_setf("hierarchy: ");
-	if (c->hierarchy == HIERARCHY_NONE) {
-		deb_setf("none\n");
-		wr(DIB3000MB_REG_VIT_HRCH, DIB3000_HRCH_OFF);
-		wr(DIB3000MB_REG_VIT_HP, DIB3000_SELECT_HP);
-		fe_cr = c->code_rate_HP;
-	} else if (c->hierarchy != HIERARCHY_AUTO) {
-		deb_setf("on\n");
-		wr(DIB3000MB_REG_VIT_HRCH, DIB3000_HRCH_ON);
-		wr(DIB3000MB_REG_VIT_HP, DIB3000_SELECT_LP);
-		fe_cr = c->code_rate_LP;
-	}
-	deb_setf("fec: ");
-	switch (fe_cr) {
-		case FEC_1_2:
-			deb_setf("1_2\n");
-			wr(DIB3000MB_REG_VIT_CODE_RATE, DIB3000_FEC_1_2);
-			break;
-		case FEC_2_3:
-			deb_setf("2_3\n");
-			wr(DIB3000MB_REG_VIT_CODE_RATE, DIB3000_FEC_2_3);
-			break;
-		case FEC_3_4:
-			deb_setf("3_4\n");
-			wr(DIB3000MB_REG_VIT_CODE_RATE, DIB3000_FEC_3_4);
-			break;
-		case FEC_5_6:
-			deb_setf("5_6\n");
-			wr(DIB3000MB_REG_VIT_CODE_RATE, DIB3000_FEC_5_6);
-			break;
-		case FEC_7_8:
-			deb_setf("7_8\n");
-			wr(DIB3000MB_REG_VIT_CODE_RATE, DIB3000_FEC_7_8);
-			break;
-		case FEC_NONE:
-			deb_setf("none ");
-			break;
-		case FEC_AUTO:
-			deb_setf("auto\n");
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	seq = dib3000_seq
-		[c->transmission_mode == TRANSMISSION_MODE_AUTO]
-		[c->guard_interval == GUARD_INTERVAL_AUTO]
-		[c->inversion == INVERSION_AUTO];
-
-	deb_setf("seq? %d\n", seq);
-
-	wr(DIB3000MB_REG_SEQ, seq);
-
-	wr(DIB3000MB_REG_ISI, seq ? DIB3000MB_ISI_INHIBIT : DIB3000MB_ISI_ACTIVATE);
-
-	if (c->transmission_mode == TRANSMISSION_MODE_2K) {
-		if (c->guard_interval == GUARD_INTERVAL_1_8) {
-			wr(DIB3000MB_REG_SYNC_IMPROVEMENT, DIB3000MB_SYNC_IMPROVE_2K_1_8);
-		} else {
-			wr(DIB3000MB_REG_SYNC_IMPROVEMENT, DIB3000MB_SYNC_IMPROVE_DEFAULT);
-		}
-
-		wr(DIB3000MB_REG_UNK_121, DIB3000MB_UNK_121_2K);
-	} else {
-		wr(DIB3000MB_REG_UNK_121, DIB3000MB_UNK_121_DEFAULT);
-	}
-
-	wr(DIB3000MB_REG_MOBILE_ALGO, DIB3000MB_MOBILE_ALGO_OFF);
-	wr(DIB3000MB_REG_MOBILE_MODE_QAM, DIB3000MB_MOBILE_MODE_QAM_OFF);
-	wr(DIB3000MB_REG_MOBILE_MODE, DIB3000MB_MOBILE_MODE_OFF);
-
-	wr_foreach(dib3000mb_reg_agc_bandwidth, dib3000mb_agc_bandwidth_high);
-
-	wr(DIB3000MB_REG_ISI, DIB3000MB_ISI_ACTIVATE);
-
-	wr(DIB3000MB_REG_RESTART, DIB3000MB_RESTART_AGC + DIB3000MB_RESTART_CTRL);
-	wr(DIB3000MB_REG_RESTART, DIB3000MB_RESTART_OFF);
-
-	/* wait for AGC lock */
-	msleep(70);
-
-	wr_foreach(dib3000mb_reg_agc_bandwidth, dib3000mb_agc_bandwidth_low);
-
-	/* something has to be auto searched */
-	if (c->modulation == QAM_AUTO ||
-		c->hierarchy == HIERARCHY_AUTO ||
-		fe_cr == FEC_AUTO ||
-		c->inversion == INVERSION_AUTO) {
-		int as_count=0;
-
-		deb_setf("autosearch enabled.\n");
-
-		wr(DIB3000MB_REG_ISI, DIB3000MB_ISI_INHIBIT);
-
-		wr(DIB3000MB_REG_RESTART, DIB3000MB_RESTART_AUTO_SEARCH);
-		wr(DIB3000MB_REG_RESTART, DIB3000MB_RESTART_OFF);
-
-		while ((search_state =
-				dib3000_search_status(
-					rd(DIB3000MB_REG_AS_IRQ_PENDING),
-					rd(DIB3000MB_REG_LOCK2_VALUE))) < 0 && as_count++ < 100)
-			msleep(1);
-
-		deb_setf("search_state after autosearch %d after %d checks\n",search_state,as_count);
-
-		if (search_state == 1) {
-			if (dib3000mb_get_frontend(fe) == 0) {
-				deb_setf("reading tuning data from frontend succeeded.\n");
-				return dib3000mb_set_frontend(fe, 0);
-			}
-		}
-
-	} else {
-		wr(DIB3000MB_REG_RESTART, DIB3000MB_RESTART_CTRL);
-		wr(DIB3000MB_REG_RESTART, DIB3000MB_RESTART_OFF);
-	}
-
-	return 0;
-}
-
-static int dib3000mb_fe_init(struct dvb_frontend* fe, int mobile_mode)
-{
-	struct dib3000_state* state = fe->demodulator_priv;
-
-	deb_info("dib3000mb is getting up.\n");
-	wr(DIB3000MB_REG_POWER_CONTROL, DIB3000MB_POWER_UP);
-
-	wr(DIB3000MB_REG_RESTART, DIB3000MB_RESTART_AGC);
-
-	wr(DIB3000MB_REG_RESET_DEVICE, DIB3000MB_RESET_DEVICE);
-	wr(DIB3000MB_REG_RESET_DEVICE, DIB3000MB_RESET_DEVICE_RST);
-
-	wr(DIB3000MB_REG_CLOCK, DIB3000MB_CLOCK_DEFAULT);
-
-	wr(DIB3000MB_REG_ELECT_OUT_MODE, DIB3000MB_ELECT_OUT_MODE_ON);
-
-	wr(DIB3000MB_REG_DDS_FREQ_MSB, DIB3000MB_DDS_FREQ_MSB);
-	wr(DIB3000MB_REG_DDS_FREQ_LSB, DIB3000MB_DDS_FREQ_LSB);
-
-	wr_foreach(dib3000mb_reg_timing_freq, dib3000mb_timing_freq[2]);
-
-	wr_foreach(dib3000mb_reg_impulse_noise,
-			dib3000mb_impulse_noise_values[DIB3000MB_IMPNOISE_OFF]);
-
-	wr_foreach(dib3000mb_reg_agc_gain, dib3000mb_default_agc_gain);
-
-	wr(DIB3000MB_REG_PHASE_NOISE, DIB3000MB_PHASE_NOISE_DEFAULT);
-
-	wr_foreach(dib3000mb_reg_phase_noise, dib3000mb_default_noise_phase);
-
-	wr_foreach(dib3000mb_reg_lock_duration, dib3000mb_default_lock_duration);
-
-	wr_foreach(dib3000mb_reg_agc_bandwidth, dib3000mb_agc_bandwidth_low);
-
-	wr(DIB3000MB_REG_LOCK0_MASK, DIB3000MB_LOCK0_DEFAULT);
-	wr(DIB3000MB_REG_LOCK1_MASK, DIB3000MB_LOCK1_SEARCH_4);
-	wr(DIB3000MB_REG_LOCK2_MASK, DIB3000MB_LOCK2_DEFAULT);
-	wr(DIB3000MB_REG_SEQ, dib3000_seq[1][1][1]);
-
-	wr_foreach(dib3000mb_reg_bandwidth, dib3000mb_bandwidth_8mhz);
-
-	wr(DIB3000MB_REG_UNK_68, DIB3000MB_UNK_68);
-	wr(DIB3000MB_REG_UNK_69, DIB3000MB_UNK_69);
-	wr(DIB3000MB_REG_UNK_71, DIB3000MB_UNK_71);
-	wr(DIB3000MB_REG_UNK_77, DIB3000MB_UNK_77);
-	wr(DIB3000MB_REG_UNK_78, DIB3000MB_UNK_78);
-	wr(DIB3000MB_REG_ISI, DIB3000MB_ISI_INHIBIT);
-	wr(DIB3000MB_REG_UNK_92, DIB3000MB_UNK_92);
-	wr(DIB3000MB_REG_UNK_96, DIB3000MB_UNK_96);
-	wr(DIB3000MB_REG_UNK_97, DIB3000MB_UNK_97);
-	wr(DIB3000MB_REG_UNK_106, DIB3000MB_UNK_106);
-	wr(DIB3000MB_REG_UNK_107, DIB3000MB_UNK_107);
-	wr(DIB3000MB_REG_UNK_108, DIB3000MB_UNK_108);
-	wr(DIB3000MB_REG_UNK_122, DIB3000MB_UNK_122);
-	wr(DIB3000MB_REG_MOBILE_MODE_QAM, DIB3000MB_MOBILE_MODE_QAM_OFF);
-	wr(DIB3000MB_REG_BERLEN, DIB3000MB_BERLEN_DEFAULT);
-
-	wr_foreach(dib3000mb_reg_filter_coeffs, dib3000mb_filter_coeffs);
-
-	wr(DIB3000MB_REG_MOBILE_ALGO, DIB3000MB_MOBILE_ALGO_ON);
-	wr(DIB3000MB_REG_MULTI_DEMOD_MSB, DIB3000MB_MULTI_DEMOD_MSB);
-	wr(DIB3000MB_REG_MULTI_DEMOD_LSB, DIB3000MB_MULTI_DEMOD_LSB);
-
-	wr(DIB3000MB_REG_OUTPUT_MODE, DIB3000MB_OUTPUT_MODE_SLAVE);
-
-	wr(DIB3000MB_REG_FIFO_142, DIB3000MB_FIFO_142);
-	wr(DIB3000MB_REG_MPEG2_OUT_MODE, DIB3000MB_MPEG2_OUT_MODE_188);
-	wr(DIB3000MB_REG_PID_PARSE, DIB3000MB_PID_PARSE_ACTIVATE);
-	wr(DIB3000MB_REG_FIFO, DIB3000MB_FIFO_INHIBIT);
-	wr(DIB3000MB_REG_FIFO_146, DIB3000MB_FIFO_146);
-	wr(DIB3000MB_REG_FIFO_147, DIB3000MB_FIFO_147);
-
-	wr(DIB3000MB_REG_DATA_IN_DIVERSITY, DIB3000MB_DATA_DIVERSITY_IN_OFF);
-
-	return 0;
-}
-
-static int dib3000mb_get_frontend(struct dvb_frontend* fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct dib3000_state* state = fe->demodulator_priv;
-	fe_code_rate_t *cr;
-	u16 tps_val;
-	int inv_test1,inv_test2;
-	u32 dds_val, threshold = 0x800000;
-
-	if (!rd(DIB3000MB_REG_TPS_LOCK))
-		return 0;
-
-	dds_val = ((rd(DIB3000MB_REG_DDS_VALUE_MSB) & 0xff) << 16) + rd(DIB3000MB_REG_DDS_VALUE_LSB);
-	deb_getf("DDS_VAL: %x %x %x",dds_val, rd(DIB3000MB_REG_DDS_VALUE_MSB), rd(DIB3000MB_REG_DDS_VALUE_LSB));
-	if (dds_val < threshold)
-		inv_test1 = 0;
-	else if (dds_val == threshold)
-		inv_test1 = 1;
-	else
-		inv_test1 = 2;
-
-	dds_val = ((rd(DIB3000MB_REG_DDS_FREQ_MSB) & 0xff) << 16) + rd(DIB3000MB_REG_DDS_FREQ_LSB);
-	deb_getf("DDS_FREQ: %x %x %x",dds_val, rd(DIB3000MB_REG_DDS_FREQ_MSB), rd(DIB3000MB_REG_DDS_FREQ_LSB));
-	if (dds_val < threshold)
-		inv_test2 = 0;
-	else if (dds_val == threshold)
-		inv_test2 = 1;
-	else
-		inv_test2 = 2;
-
-	c->inversion =
-		((inv_test2 == 2) && (inv_test1==1 || inv_test1==0)) ||
-		((inv_test2 == 0) && (inv_test1==1 || inv_test1==2)) ?
-		INVERSION_ON : INVERSION_OFF;
-
-	deb_getf("inversion %d %d, %d\n", inv_test2, inv_test1, c->inversion);
-
-	switch ((tps_val = rd(DIB3000MB_REG_TPS_QAM))) {
-		case DIB3000_CONSTELLATION_QPSK:
-			deb_getf("QPSK ");
-			c->modulation = QPSK;
-			break;
-		case DIB3000_CONSTELLATION_16QAM:
-			deb_getf("QAM16 ");
-			c->modulation = QAM_16;
-			break;
-		case DIB3000_CONSTELLATION_64QAM:
-			deb_getf("QAM64 ");
-			c->modulation = QAM_64;
-			break;
-		default:
-			err("Unexpected constellation returned by TPS (%d)", tps_val);
-			break;
-	}
-	deb_getf("TPS: %d\n", tps_val);
-
-	if (rd(DIB3000MB_REG_TPS_HRCH)) {
-		deb_getf("HRCH ON\n");
-		cr = &c->code_rate_LP;
-		c->code_rate_HP = FEC_NONE;
-		switch ((tps_val = rd(DIB3000MB_REG_TPS_VIT_ALPHA))) {
-			case DIB3000_ALPHA_0:
-				deb_getf("HIERARCHY_NONE ");
-				c->hierarchy = HIERARCHY_NONE;
-				break;
-			case DIB3000_ALPHA_1:
-				deb_getf("HIERARCHY_1 ");
-				c->hierarchy = HIERARCHY_1;
-				break;
-			case DIB3000_ALPHA_2:
-				deb_getf("HIERARCHY_2 ");
-				c->hierarchy = HIERARCHY_2;
-				break;
-			case DIB3000_ALPHA_4:
-				deb_getf("HIERARCHY_4 ");
-				c->hierarchy = HIERARCHY_4;
-				break;
-			default:
-				err("Unexpected ALPHA value returned by TPS (%d)", tps_val);
-				break;
-		}
-		deb_getf("TPS: %d\n", tps_val);
-
-		tps_val = rd(DIB3000MB_REG_TPS_CODE_RATE_LP);
-	} else {
-		deb_getf("HRCH OFF\n");
-		cr = &c->code_rate_HP;
-		c->code_rate_LP = FEC_NONE;
-		c->hierarchy = HIERARCHY_NONE;
-
-		tps_val = rd(DIB3000MB_REG_TPS_CODE_RATE_HP);
-	}
-
-	switch (tps_val) {
-		case DIB3000_FEC_1_2:
-			deb_getf("FEC_1_2 ");
-			*cr = FEC_1_2;
-			break;
-		case DIB3000_FEC_2_3:
-			deb_getf("FEC_2_3 ");
-			*cr = FEC_2_3;
-			break;
-		case DIB3000_FEC_3_4:
-			deb_getf("FEC_3_4 ");
-			*cr = FEC_3_4;
-			break;
-		case DIB3000_FEC_5_6:
-			deb_getf("FEC_5_6 ");
-			*cr = FEC_4_5;
-			break;
-		case DIB3000_FEC_7_8:
-			deb_getf("FEC_7_8 ");
-			*cr = FEC_7_8;
-			break;
-		default:
-			err("Unexpected FEC returned by TPS (%d)", tps_val);
-			break;
-	}
-	deb_getf("TPS: %d\n",tps_val);
-
-	switch ((tps_val = rd(DIB3000MB_REG_TPS_GUARD_TIME))) {
-		case DIB3000_GUARD_TIME_1_32:
-			deb_getf("GUARD_INTERVAL_1_32 ");
-			c->guard_interval = GUARD_INTERVAL_1_32;
-			break;
-		case DIB3000_GUARD_TIME_1_16:
-			deb_getf("GUARD_INTERVAL_1_16 ");
-			c->guard_interval = GUARD_INTERVAL_1_16;
-			break;
-		case DIB3000_GUARD_TIME_1_8:
-			deb_getf("GUARD_INTERVAL_1_8 ");
-			c->guard_interval = GUARD_INTERVAL_1_8;
-			break;
-		case DIB3000_GUARD_TIME_1_4:
-			deb_getf("GUARD_INTERVAL_1_4 ");
-			c->guard_interval = GUARD_INTERVAL_1_4;
-			break;
-		default:
-			err("Unexpected Guard Time returned by TPS (%d)", tps_val);
-			break;
-	}
-	deb_getf("TPS: %d\n", tps_val);
-
-	switch ((tps_val = rd(DIB3000MB_REG_TPS_FFT))) {
-		case DIB3000_TRANSMISSION_MODE_2K:
-			deb_getf("TRANSMISSION_MODE_2K ");
-			c->transmission_mode = TRANSMISSION_MODE_2K;
-			break;
-		case DIB3000_TRANSMISSION_MODE_8K:
-			deb_getf("TRANSMISSION_MODE_8K ");
-			c->transmission_mode = TRANSMISSION_MODE_8K;
-			break;
-		default:
-			err("unexpected transmission mode return by TPS (%d)", tps_val);
-			break;
-	}
-	deb_getf("TPS: %d\n", tps_val);
-
-	return 0;
-}
-
-static int dib3000mb_read_status(struct dvb_frontend* fe, fe_status_t *stat)
-{
-	struct dib3000_state* state = fe->demodulator_priv;
-
-	*stat = 0;
-
-	if (rd(DIB3000MB_REG_AGC_LOCK))
-		*stat |= FE_HAS_SIGNAL;
-	if (rd(DIB3000MB_REG_CARRIER_LOCK))
-		*stat |= FE_HAS_CARRIER;
-	if (rd(DIB3000MB_REG_VIT_LCK))
-		*stat |= FE_HAS_VITERBI;
-	if (rd(DIB3000MB_REG_TS_SYNC_LOCK))
-		*stat |= (FE_HAS_SYNC | FE_HAS_LOCK);
-
-	deb_getf("actual status is %2x\n",*stat);
-
-	deb_getf("autoval: tps: %d, qam: %d, hrch: %d, alpha: %d, hp: %d, lp: %d, guard: %d, fft: %d cell: %d\n",
-			rd(DIB3000MB_REG_TPS_LOCK),
-			rd(DIB3000MB_REG_TPS_QAM),
-			rd(DIB3000MB_REG_TPS_HRCH),
-			rd(DIB3000MB_REG_TPS_VIT_ALPHA),
-			rd(DIB3000MB_REG_TPS_CODE_RATE_HP),
-			rd(DIB3000MB_REG_TPS_CODE_RATE_LP),
-			rd(DIB3000MB_REG_TPS_GUARD_TIME),
-			rd(DIB3000MB_REG_TPS_FFT),
-			rd(DIB3000MB_REG_TPS_CELL_ID));
-
-	//*stat = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
-	return 0;
-}
-
-static int dib3000mb_read_ber(struct dvb_frontend* fe, u32 *ber)
-{
-	struct dib3000_state* state = fe->demodulator_priv;
-
-	*ber = ((rd(DIB3000MB_REG_BER_MSB) << 16) | rd(DIB3000MB_REG_BER_LSB));
-	return 0;
-}
-
-/* see dib3000-watch dvb-apps for exact calcuations of signal_strength and snr */
-static int dib3000mb_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
-{
-	struct dib3000_state* state = fe->demodulator_priv;
-
-	*strength = rd(DIB3000MB_REG_SIGNAL_POWER) * 0xffff / 0x170;
-	return 0;
-}
-
-static int dib3000mb_read_snr(struct dvb_frontend* fe, u16 *snr)
-{
-	struct dib3000_state* state = fe->demodulator_priv;
-	short sigpow = rd(DIB3000MB_REG_SIGNAL_POWER);
-	int icipow = ((rd(DIB3000MB_REG_NOISE_POWER_MSB) & 0xff) << 16) |
-		rd(DIB3000MB_REG_NOISE_POWER_LSB);
-	*snr = (sigpow << 8) / ((icipow > 0) ? icipow : 1);
-	return 0;
-}
-
-static int dib3000mb_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
-{
-	struct dib3000_state* state = fe->demodulator_priv;
-
-	*unc = rd(DIB3000MB_REG_PACKET_ERROR_RATE);
-	return 0;
-}
-
-static int dib3000mb_sleep(struct dvb_frontend* fe)
-{
-	struct dib3000_state* state = fe->demodulator_priv;
-	deb_info("dib3000mb is going to bed.\n");
-	wr(DIB3000MB_REG_POWER_CONTROL, DIB3000MB_POWER_DOWN);
-	return 0;
-}
-
-static int dib3000mb_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
-{
-	tune->min_delay_ms = 800;
-	return 0;
-}
-
-static int dib3000mb_fe_init_nonmobile(struct dvb_frontend* fe)
-{
-	return dib3000mb_fe_init(fe, 0);
-}
-
-static int dib3000mb_set_frontend_and_tuner(struct dvb_frontend *fe)
-{
-	return dib3000mb_set_frontend(fe, 1);
-}
-
-static void dib3000mb_release(struct dvb_frontend* fe)
-{
-	struct dib3000_state *state = fe->demodulator_priv;
-	kfree(state);
-}
-
-/* pid filter and transfer stuff */
-static int dib3000mb_pid_control(struct dvb_frontend *fe,int index, int pid,int onoff)
-{
-	struct dib3000_state *state = fe->demodulator_priv;
-	pid = (onoff ? pid | DIB3000_ACTIVATE_PID_FILTERING : 0);
-	wr(index+DIB3000MB_REG_FIRST_PID,pid);
-	return 0;
-}
-
-static int dib3000mb_fifo_control(struct dvb_frontend *fe, int onoff)
-{
-	struct dib3000_state *state = fe->demodulator_priv;
-
-	deb_xfer("%s fifo\n",onoff ? "enabling" : "disabling");
-	if (onoff) {
-		wr(DIB3000MB_REG_FIFO, DIB3000MB_FIFO_ACTIVATE);
-	} else {
-		wr(DIB3000MB_REG_FIFO, DIB3000MB_FIFO_INHIBIT);
-	}
-	return 0;
-}
-
-static int dib3000mb_pid_parse(struct dvb_frontend *fe, int onoff)
-{
-	struct dib3000_state *state = fe->demodulator_priv;
-	deb_xfer("%s pid parsing\n",onoff ? "enabling" : "disabling");
-	wr(DIB3000MB_REG_PID_PARSE,onoff);
-	return 0;
-}
-
-static int dib3000mb_tuner_pass_ctrl(struct dvb_frontend *fe, int onoff, u8 pll_addr)
-{
-	struct dib3000_state *state = fe->demodulator_priv;
-	if (onoff) {
-		wr(DIB3000MB_REG_TUNER, DIB3000_TUNER_WRITE_ENABLE(pll_addr));
-	} else {
-		wr(DIB3000MB_REG_TUNER, DIB3000_TUNER_WRITE_DISABLE(pll_addr));
-	}
-	return 0;
-}
-
-static struct dvb_frontend_ops dib3000mb_ops;
-
-struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config,
-				      struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops)
-{
-	struct dib3000_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct dib3000_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->i2c = i2c;
-	memcpy(&state->config,config,sizeof(struct dib3000_config));
-
-	/* check for the correct demod */
-	if (rd(DIB3000_REG_MANUFACTOR_ID) != DIB3000_I2C_ID_DIBCOM)
-		goto error;
-
-	if (rd(DIB3000_REG_DEVICE_ID) != DIB3000MB_DEVICE_ID)
-		goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &dib3000mb_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-
-	/* set the xfer operations */
-	xfer_ops->pid_parse = dib3000mb_pid_parse;
-	xfer_ops->fifo_ctrl = dib3000mb_fifo_control;
-	xfer_ops->pid_ctrl = dib3000mb_pid_control;
-	xfer_ops->tuner_pass_ctrl = dib3000mb_tuner_pass_ctrl;
-
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops dib3000mb_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name			= "DiBcom 3000M-B DVB-T",
-		.frequency_min		= 44250000,
-		.frequency_max		= 867250000,
-		.frequency_stepsize	= 62500,
-		.caps = FE_CAN_INVERSION_AUTO |
-				FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-				FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-				FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-				FE_CAN_TRANSMISSION_MODE_AUTO |
-				FE_CAN_GUARD_INTERVAL_AUTO |
-				FE_CAN_RECOVER |
-				FE_CAN_HIERARCHY_AUTO,
-	},
-
-	.release = dib3000mb_release,
-
-	.init = dib3000mb_fe_init_nonmobile,
-	.sleep = dib3000mb_sleep,
-
-	.set_frontend = dib3000mb_set_frontend_and_tuner,
-	.get_frontend = dib3000mb_get_frontend,
-	.get_tune_settings = dib3000mb_fe_get_tune_settings,
-
-	.read_status = dib3000mb_read_status,
-	.read_ber = dib3000mb_read_ber,
-	.read_signal_strength = dib3000mb_read_signal_strength,
-	.read_snr = dib3000mb_read_snr,
-	.read_ucblocks = dib3000mb_read_unc_blocks,
-};
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(dib3000mb_attach);
diff --git a/drivers/media/dvb/frontends/dib3000mb_priv.h b/drivers/media/dvb/frontends/dib3000mb_priv.h
deleted file mode 100644
index 9dc235a..0000000
--- a/drivers/media/dvb/frontends/dib3000mb_priv.h
+++ /dev/null
@@ -1,556 +0,0 @@
-/*
- * dib3000mb_priv.h
- *
- * Copyright (C) 2004 Patrick Boettcher (patrick.boettcher@desy.de)
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- *
- * for more information see dib3000mb.c .
- */
-
-#ifndef __DIB3000MB_PRIV_H_INCLUDED__
-#define __DIB3000MB_PRIV_H_INCLUDED__
-
-/* info and err, taken from usb.h, if there is anything available like by default. */
-#define err(format, arg...)  printk(KERN_ERR     "dib3000: " format "\n" , ## arg)
-#define info(format, arg...) printk(KERN_INFO    "dib3000: " format "\n" , ## arg)
-#define warn(format, arg...) printk(KERN_WARNING "dib3000: " format "\n" , ## arg)
-
-/* handy shortcuts */
-#define rd(reg) dib3000_read_reg(state,reg)
-
-#define wr(reg,val) if (dib3000_write_reg(state,reg,val)) \
-	{ err("while sending 0x%04x to 0x%04x.",val,reg); return -EREMOTEIO; }
-
-#define wr_foreach(a,v) { int i; \
-	if (sizeof(a) != sizeof(v)) \
-		err("sizeof: %zu %zu is different",sizeof(a),sizeof(v));\
-	for (i=0; i < sizeof(a)/sizeof(u16); i++) \
-		wr(a[i],v[i]); \
-	}
-
-#define set_or(reg,val) wr(reg,rd(reg) | val)
-
-#define set_and(reg,val) wr(reg,rd(reg) & val)
-
-/* debug */
-
-#define dprintk(level,args...) \
-    do { if ((debug & level)) { printk(args); } } while (0)
-
-/* mask for enabling a specific pid for the pid_filter */
-#define DIB3000_ACTIVATE_PID_FILTERING	(0x2000)
-
-/* common values for tuning */
-#define DIB3000_ALPHA_0					(     0)
-#define DIB3000_ALPHA_1					(     1)
-#define DIB3000_ALPHA_2					(     2)
-#define DIB3000_ALPHA_4					(     4)
-
-#define DIB3000_CONSTELLATION_QPSK		(     0)
-#define DIB3000_CONSTELLATION_16QAM		(     1)
-#define DIB3000_CONSTELLATION_64QAM		(     2)
-
-#define DIB3000_GUARD_TIME_1_32			(     0)
-#define DIB3000_GUARD_TIME_1_16			(     1)
-#define DIB3000_GUARD_TIME_1_8			(     2)
-#define DIB3000_GUARD_TIME_1_4			(     3)
-
-#define DIB3000_TRANSMISSION_MODE_2K	(     0)
-#define DIB3000_TRANSMISSION_MODE_8K	(     1)
-
-#define DIB3000_SELECT_LP				(     0)
-#define DIB3000_SELECT_HP				(     1)
-
-#define DIB3000_FEC_1_2					(     1)
-#define DIB3000_FEC_2_3					(     2)
-#define DIB3000_FEC_3_4					(     3)
-#define DIB3000_FEC_5_6					(     5)
-#define DIB3000_FEC_7_8					(     7)
-
-#define DIB3000_HRCH_OFF				(     0)
-#define DIB3000_HRCH_ON					(     1)
-
-#define DIB3000_DDS_INVERSION_OFF		(     0)
-#define DIB3000_DDS_INVERSION_ON		(     1)
-
-#define DIB3000_TUNER_WRITE_ENABLE(a)	(0xffff & (a << 8))
-#define DIB3000_TUNER_WRITE_DISABLE(a)	(0xffff & ((a << 8) | (1 << 7)))
-
-#define DIB3000_REG_MANUFACTOR_ID		(  1025)
-#define DIB3000_I2C_ID_DIBCOM			(0x01b3)
-
-#define DIB3000_REG_DEVICE_ID			(  1026)
-#define DIB3000MB_DEVICE_ID				(0x3000)
-#define DIB3000MC_DEVICE_ID				(0x3001)
-#define DIB3000P_DEVICE_ID				(0x3002)
-
-/* frontend state */
-struct dib3000_state {
-	struct i2c_adapter* i2c;
-
-/* configuration settings */
-	struct dib3000_config config;
-
-	struct dvb_frontend frontend;
-	int timing_offset;
-	int timing_offset_comp_done;
-
-	u32 last_tuned_bw;
-	u32 last_tuned_freq;
-};
-
-/* register addresses and some of their default values */
-
-/* restart subsystems */
-#define DIB3000MB_REG_RESTART			(     0)
-
-#define DIB3000MB_RESTART_OFF			(     0)
-#define DIB3000MB_RESTART_AUTO_SEARCH		(1 << 1)
-#define DIB3000MB_RESTART_CTRL				(1 << 2)
-#define DIB3000MB_RESTART_AGC				(1 << 3)
-
-/* FFT size */
-#define DIB3000MB_REG_FFT				(     1)
-
-/* Guard time */
-#define DIB3000MB_REG_GUARD_TIME		(     2)
-
-/* QAM */
-#define DIB3000MB_REG_QAM				(     3)
-
-/* Alpha coefficient high priority Viterbi algorithm */
-#define DIB3000MB_REG_VIT_ALPHA			(     4)
-
-/* spectrum inversion */
-#define DIB3000MB_REG_DDS_INV			(     5)
-
-/* DDS frequency value (IF position) ad ? values don't match reg_3000mb.txt */
-#define DIB3000MB_REG_DDS_FREQ_MSB		(     6)
-#define DIB3000MB_REG_DDS_FREQ_LSB		(     7)
-#define DIB3000MB_DDS_FREQ_MSB				(   178)
-#define DIB3000MB_DDS_FREQ_LSB				(  8990)
-
-/* timing frequency (carrier spacing) */
-static u16 dib3000mb_reg_timing_freq[] = { 8,9 };
-static u16 dib3000mb_timing_freq[][2] = {
-	{ 126 , 48873 }, /* 6 MHz */
-	{ 147 , 57019 }, /* 7 MHz */
-	{ 168 , 65164 }, /* 8 MHz */
-};
-
-/* impulse noise parameter */
-/* 36 ??? */
-
-static u16 dib3000mb_reg_impulse_noise[] = { 10,11,12,15,36 };
-
-enum dib3000mb_impulse_noise_type {
-	DIB3000MB_IMPNOISE_OFF,
-	DIB3000MB_IMPNOISE_MOBILE,
-	DIB3000MB_IMPNOISE_FIXED,
-	DIB3000MB_IMPNOISE_DEFAULT
-};
-
-static u16 dib3000mb_impulse_noise_values[][5] = {
-	{ 0x0000, 0x0004, 0x0014, 0x01ff, 0x0399 }, /* off */
-	{ 0x0001, 0x0004, 0x0014, 0x01ff, 0x037b }, /* mobile */
-	{ 0x0001, 0x0004, 0x0020, 0x01bd, 0x0399 }, /* fixed */
-	{ 0x0000, 0x0002, 0x000a, 0x01ff, 0x0399 }, /* default */
-};
-
-/*
- * Dual Automatic-Gain-Control
- * - gains RF in tuner (AGC1)
- * - gains IF after filtering (AGC2)
- */
-
-/* also from 16 to 18 */
-static u16 dib3000mb_reg_agc_gain[] = {
-	19,20,21,22,23,24,25,26,27,28,29,30,31,32
-};
-
-static u16 dib3000mb_default_agc_gain[] =
-	{ 0x0001, 52429,   623, 128, 166, 195, 61,   /* RF ??? */
-	  0x0001, 53766, 38011,   0,  90,  33, 23 }; /* IF ??? */
-
-/* phase noise */
-/* 36 is set when setting the impulse noise */
-static u16 dib3000mb_reg_phase_noise[] = { 33,34,35,37,38 };
-
-static u16 dib3000mb_default_noise_phase[] = { 2, 544, 0, 5, 4 };
-
-/* lock duration */
-static u16 dib3000mb_reg_lock_duration[] = { 39,40 };
-static u16 dib3000mb_default_lock_duration[] = { 135, 135 };
-
-/* AGC loop bandwidth */
-static u16 dib3000mb_reg_agc_bandwidth[] = { 43,44,45,46,47,48,49,50 };
-
-static u16 dib3000mb_agc_bandwidth_low[]  =
-	{ 2088, 10, 2088, 10, 3448, 5, 3448, 5 };
-static u16 dib3000mb_agc_bandwidth_high[] =
-	{ 2349,  5, 2349,  5, 2586, 2, 2586, 2 };
-
-/*
- * lock0 definition (coff_lock)
- */
-#define DIB3000MB_REG_LOCK0_MASK		(    51)
-#define DIB3000MB_LOCK0_DEFAULT				(     4)
-
-/*
- * lock1 definition (cpil_lock)
- * for auto search
- * which values hide behind the lock masks
- */
-#define DIB3000MB_REG_LOCK1_MASK		(    52)
-#define DIB3000MB_LOCK1_SEARCH_4			(0x0004)
-#define DIB3000MB_LOCK1_SEARCH_2048			(0x0800)
-#define DIB3000MB_LOCK1_DEFAULT				(0x0001)
-
-/*
- * lock2 definition (fec_lock) */
-#define DIB3000MB_REG_LOCK2_MASK		(    53)
-#define DIB3000MB_LOCK2_DEFAULT				(0x0080)
-
-/*
- * SEQ ? what was that again ... :)
- * changes when, inversion, guard time and fft is
- * either automatically detected or not
- */
-#define DIB3000MB_REG_SEQ				(    54)
-
-/* bandwidth */
-static u16 dib3000mb_reg_bandwidth[] = { 55,56,57,58,59,60,61,62,63,64,65,66,67 };
-static u16 dib3000mb_bandwidth_6mhz[] =
-	{ 0, 33, 53312, 112, 46635, 563, 36565, 0, 1000, 0, 1010, 1, 45264 };
-
-static u16 dib3000mb_bandwidth_7mhz[] =
-	{ 0, 28, 64421,  96, 39973, 483,  3255, 0, 1000, 0, 1010, 1, 45264 };
-
-static u16 dib3000mb_bandwidth_8mhz[] =
-	{ 0, 25, 23600,  84, 34976, 422, 43808, 0, 1000, 0, 1010, 1, 45264 };
-
-#define DIB3000MB_REG_UNK_68				(    68)
-#define DIB3000MB_UNK_68						(     0)
-
-#define DIB3000MB_REG_UNK_69				(    69)
-#define DIB3000MB_UNK_69						(     0)
-
-#define DIB3000MB_REG_UNK_71				(    71)
-#define DIB3000MB_UNK_71						(     0)
-
-#define DIB3000MB_REG_UNK_77				(    77)
-#define DIB3000MB_UNK_77						(     6)
-
-#define DIB3000MB_REG_UNK_78				(    78)
-#define DIB3000MB_UNK_78						(0x0080)
-
-/* isi */
-#define DIB3000MB_REG_ISI				(    79)
-#define DIB3000MB_ISI_ACTIVATE				(     0)
-#define DIB3000MB_ISI_INHIBIT				(     1)
-
-/* sync impovement */
-#define DIB3000MB_REG_SYNC_IMPROVEMENT	(    84)
-#define DIB3000MB_SYNC_IMPROVE_2K_1_8		(     3)
-#define DIB3000MB_SYNC_IMPROVE_DEFAULT		(     0)
-
-/* phase noise compensation inhibition */
-#define DIB3000MB_REG_PHASE_NOISE		(    87)
-#define DIB3000MB_PHASE_NOISE_DEFAULT	(     0)
-
-#define DIB3000MB_REG_UNK_92				(    92)
-#define DIB3000MB_UNK_92						(0x0080)
-
-#define DIB3000MB_REG_UNK_96				(    96)
-#define DIB3000MB_UNK_96						(0x0010)
-
-#define DIB3000MB_REG_UNK_97				(    97)
-#define DIB3000MB_UNK_97						(0x0009)
-
-/* mobile mode ??? */
-#define DIB3000MB_REG_MOBILE_MODE		(   101)
-#define DIB3000MB_MOBILE_MODE_ON			(     1)
-#define DIB3000MB_MOBILE_MODE_OFF			(     0)
-
-#define DIB3000MB_REG_UNK_106			(   106)
-#define DIB3000MB_UNK_106					(0x0080)
-
-#define DIB3000MB_REG_UNK_107			(   107)
-#define DIB3000MB_UNK_107					(0x0080)
-
-#define DIB3000MB_REG_UNK_108			(   108)
-#define DIB3000MB_UNK_108					(0x0080)
-
-/* fft */
-#define DIB3000MB_REG_UNK_121			(   121)
-#define DIB3000MB_UNK_121_2K				(     7)
-#define DIB3000MB_UNK_121_DEFAULT			(     5)
-
-#define DIB3000MB_REG_UNK_122			(   122)
-#define DIB3000MB_UNK_122					(  2867)
-
-/* QAM for mobile mode */
-#define DIB3000MB_REG_MOBILE_MODE_QAM	(   126)
-#define DIB3000MB_MOBILE_MODE_QAM_64		(     3)
-#define DIB3000MB_MOBILE_MODE_QAM_QPSK_16	(     1)
-#define DIB3000MB_MOBILE_MODE_QAM_OFF		(     0)
-
-/*
- * data diversity when having more than one chip on-board
- * see also DIB3000MB_OUTPUT_MODE_DATA_DIVERSITY
- */
-#define DIB3000MB_REG_DATA_IN_DIVERSITY		(   127)
-#define DIB3000MB_DATA_DIVERSITY_IN_OFF			(     0)
-#define DIB3000MB_DATA_DIVERSITY_IN_ON			(     2)
-
-/* vit hrch */
-#define DIB3000MB_REG_VIT_HRCH			(   128)
-
-/* vit code rate */
-#define DIB3000MB_REG_VIT_CODE_RATE		(   129)
-
-/* vit select hp */
-#define DIB3000MB_REG_VIT_HP			(   130)
-
-/* time frame for Bit-Error-Rate calculation */
-#define DIB3000MB_REG_BERLEN			(   135)
-#define DIB3000MB_BERLEN_LONG				(     0)
-#define DIB3000MB_BERLEN_DEFAULT			(     1)
-#define DIB3000MB_BERLEN_MEDIUM				(     2)
-#define DIB3000MB_BERLEN_SHORT				(     3)
-
-/* 142 - 152 FIFO parameters
- * which is what ?
- */
-
-#define DIB3000MB_REG_FIFO_142			(   142)
-#define DIB3000MB_FIFO_142					(     0)
-
-/* MPEG2 TS output mode */
-#define DIB3000MB_REG_MPEG2_OUT_MODE	(   143)
-#define DIB3000MB_MPEG2_OUT_MODE_204		(     0)
-#define DIB3000MB_MPEG2_OUT_MODE_188		(     1)
-
-#define DIB3000MB_REG_PID_PARSE			(   144)
-#define DIB3000MB_PID_PARSE_INHIBIT		(     0)
-#define DIB3000MB_PID_PARSE_ACTIVATE	(     1)
-
-#define DIB3000MB_REG_FIFO				(   145)
-#define DIB3000MB_FIFO_INHIBIT				(     1)
-#define DIB3000MB_FIFO_ACTIVATE				(     0)
-
-#define DIB3000MB_REG_FIFO_146			(   146)
-#define DIB3000MB_FIFO_146					(     3)
-
-#define DIB3000MB_REG_FIFO_147			(   147)
-#define DIB3000MB_FIFO_147					(0x0100)
-
-/*
- * pidfilter
- * it is not a hardware pidfilter but a filter which drops all pids
- * except the ones set. Necessary because of the limited USB1.1 bandwidth.
- * regs 153-168
- */
-
-#define DIB3000MB_REG_FIRST_PID			(   153)
-#define DIB3000MB_NUM_PIDS				(    16)
-
-/*
- * output mode
- * USB devices have to use 'slave'-mode
- * see also DIB3000MB_REG_ELECT_OUT_MODE
- */
-#define DIB3000MB_REG_OUTPUT_MODE		(   169)
-#define DIB3000MB_OUTPUT_MODE_GATED_CLK		(     0)
-#define DIB3000MB_OUTPUT_MODE_CONT_CLK		(     1)
-#define DIB3000MB_OUTPUT_MODE_SERIAL		(     2)
-#define DIB3000MB_OUTPUT_MODE_DATA_DIVERSITY	(     5)
-#define DIB3000MB_OUTPUT_MODE_SLAVE			(     6)
-
-/* irq event mask */
-#define DIB3000MB_REG_IRQ_EVENT_MASK		(   170)
-#define DIB3000MB_IRQ_EVENT_MASK				(     0)
-
-/* filter coefficients */
-static u16 dib3000mb_reg_filter_coeffs[] = {
-	171, 172, 173, 174, 175, 176, 177, 178,
-	179, 180, 181, 182, 183, 184, 185, 186,
-	188, 189, 190, 191, 192, 194
-};
-
-static u16 dib3000mb_filter_coeffs[] = {
-	 226,  160,   29,
-	 979,  998,   19,
-	  22, 1019, 1006,
-	1022,   12,    6,
-	1017, 1017,    3,
-	   6,       1019,
-	1021,    2,    3,
-	   1,          0,
-};
-
-/*
- * mobile algorithm (when you are moving with your device)
- * but not faster than 90 km/h
- */
-#define DIB3000MB_REG_MOBILE_ALGO		(   195)
-#define DIB3000MB_MOBILE_ALGO_ON			(     0)
-#define DIB3000MB_MOBILE_ALGO_OFF			(     1)
-
-/* multiple demodulators algorithm */
-#define DIB3000MB_REG_MULTI_DEMOD_MSB	(   206)
-#define DIB3000MB_REG_MULTI_DEMOD_LSB	(   207)
-
-/* terminator, no more demods */
-#define DIB3000MB_MULTI_DEMOD_MSB			( 32767)
-#define DIB3000MB_MULTI_DEMOD_LSB			(  4095)
-
-/* bring the device into a known  */
-#define DIB3000MB_REG_RESET_DEVICE		(  1024)
-#define DIB3000MB_RESET_DEVICE				(0x812c)
-#define DIB3000MB_RESET_DEVICE_RST			(     0)
-
-/* hardware clock configuration */
-#define DIB3000MB_REG_CLOCK				(  1027)
-#define DIB3000MB_CLOCK_DEFAULT				(0x9000)
-#define DIB3000MB_CLOCK_DIVERSITY			(0x92b0)
-
-/* power down config */
-#define DIB3000MB_REG_POWER_CONTROL		(  1028)
-#define DIB3000MB_POWER_DOWN				(     1)
-#define DIB3000MB_POWER_UP					(     0)
-
-/* electrical output mode */
-#define DIB3000MB_REG_ELECT_OUT_MODE	(  1029)
-#define DIB3000MB_ELECT_OUT_MODE_OFF		(     0)
-#define DIB3000MB_ELECT_OUT_MODE_ON			(     1)
-
-/* set the tuner i2c address */
-#define DIB3000MB_REG_TUNER				(  1089)
-
-/* monitoring registers (read only) */
-
-/* agc loop locked (size: 1) */
-#define DIB3000MB_REG_AGC_LOCK			(   324)
-
-/* agc power (size: 16) */
-#define DIB3000MB_REG_AGC_POWER			(   325)
-
-/* agc1 value (16) */
-#define DIB3000MB_REG_AGC1_VALUE		(   326)
-
-/* agc2 value (16) */
-#define DIB3000MB_REG_AGC2_VALUE		(   327)
-
-/* total RF power (16), can be used for signal strength */
-#define DIB3000MB_REG_RF_POWER			(   328)
-
-/* dds_frequency with offset (24) */
-#define DIB3000MB_REG_DDS_VALUE_MSB		(   339)
-#define DIB3000MB_REG_DDS_VALUE_LSB		(   340)
-
-/* timing offset signed (24) */
-#define DIB3000MB_REG_TIMING_OFFSET_MSB	(   341)
-#define DIB3000MB_REG_TIMING_OFFSET_LSB	(   342)
-
-/* fft start position (13) */
-#define DIB3000MB_REG_FFT_WINDOW_POS	(   353)
-
-/* carriers locked (1) */
-#define DIB3000MB_REG_CARRIER_LOCK		(   355)
-
-/* noise power (24) */
-#define DIB3000MB_REG_NOISE_POWER_MSB	(   372)
-#define DIB3000MB_REG_NOISE_POWER_LSB	(   373)
-
-#define DIB3000MB_REG_MOBILE_NOISE_MSB	(   374)
-#define DIB3000MB_REG_MOBILE_NOISE_LSB	(   375)
-
-/*
- * signal power (16), this and the above can be
- * used to calculate the signal/noise - ratio
- */
-#define DIB3000MB_REG_SIGNAL_POWER		(   380)
-
-/* mer (24) */
-#define DIB3000MB_REG_MER_MSB			(   381)
-#define DIB3000MB_REG_MER_LSB			(   382)
-
-/*
- * Transmission Parameter Signalling (TPS)
- * the following registers can be used to get TPS-information.
- * The values are according to the DVB-T standard.
- */
-
-/* TPS locked (1) */
-#define DIB3000MB_REG_TPS_LOCK			(   394)
-
-/* QAM from TPS (2) (values according to DIB3000MB_REG_QAM) */
-#define DIB3000MB_REG_TPS_QAM			(   398)
-
-/* hierarchy from TPS (1) */
-#define DIB3000MB_REG_TPS_HRCH			(   399)
-
-/* alpha from TPS (3) (values according to DIB3000MB_REG_VIT_ALPHA) */
-#define DIB3000MB_REG_TPS_VIT_ALPHA		(   400)
-
-/* code rate high priority from TPS (3) (values according to DIB3000MB_FEC_*) */
-#define DIB3000MB_REG_TPS_CODE_RATE_HP	(   401)
-
-/* code rate low priority from TPS (3) if DIB3000MB_REG_TPS_VIT_ALPHA */
-#define DIB3000MB_REG_TPS_CODE_RATE_LP	(   402)
-
-/* guard time from TPS (2) (values according to DIB3000MB_REG_GUARD_TIME */
-#define DIB3000MB_REG_TPS_GUARD_TIME	(   403)
-
-/* fft size from TPS (2) (values according to DIB3000MB_REG_FFT) */
-#define DIB3000MB_REG_TPS_FFT			(   404)
-
-/* cell id from TPS (16) */
-#define DIB3000MB_REG_TPS_CELL_ID		(   406)
-
-/* TPS (68) */
-#define DIB3000MB_REG_TPS_1				(   408)
-#define DIB3000MB_REG_TPS_2				(   409)
-#define DIB3000MB_REG_TPS_3				(   410)
-#define DIB3000MB_REG_TPS_4				(   411)
-#define DIB3000MB_REG_TPS_5				(   412)
-
-/* bit error rate (before RS correction) (21) */
-#define DIB3000MB_REG_BER_MSB			(   414)
-#define DIB3000MB_REG_BER_LSB			(   415)
-
-/* packet error rate (uncorrected TS packets) (16) */
-#define DIB3000MB_REG_PACKET_ERROR_RATE	(   417)
-
-/* uncorrected packet count (16) */
-#define DIB3000MB_REG_UNC				(   420)
-
-/* viterbi locked (1) */
-#define DIB3000MB_REG_VIT_LCK			(   421)
-
-/* viterbi inidcator (16) */
-#define DIB3000MB_REG_VIT_INDICATOR		(   422)
-
-/* transport stream sync lock (1) */
-#define DIB3000MB_REG_TS_SYNC_LOCK		(   423)
-
-/* transport stream RS lock (1) */
-#define DIB3000MB_REG_TS_RS_LOCK		(   424)
-
-/* lock mask 0 value (1) */
-#define DIB3000MB_REG_LOCK0_VALUE		(   425)
-
-/* lock mask 1 value (1) */
-#define DIB3000MB_REG_LOCK1_VALUE		(   426)
-
-/* lock mask 2 value (1) */
-#define DIB3000MB_REG_LOCK2_VALUE		(   427)
-
-/* interrupt pending for auto search */
-#define DIB3000MB_REG_AS_IRQ_PENDING	(   434)
-
-#endif
diff --git a/drivers/media/dvb/frontends/dib3000mc.c b/drivers/media/dvb/frontends/dib3000mc.c
deleted file mode 100644
index ffad181..0000000
--- a/drivers/media/dvb/frontends/dib3000mc.c
+++ /dev/null
@@ -1,940 +0,0 @@
-/*
- * Driver for DiBcom DiB3000MC/P-demodulator.
- *
- * Copyright (C) 2004-7 DiBcom (http://www.dibcom.fr/)
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
- *
- * This code is partially based on the previous dib3000mc.c .
- *
- * This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-
-#include "dvb_frontend.h"
-
-#include "dib3000mc.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
-
-static int buggy_sfn_workaround;
-module_param(buggy_sfn_workaround, int, 0644);
-MODULE_PARM_DESC(buggy_sfn_workaround, "Enable work-around for buggy SFNs (default: 0)");
-
-#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB3000MC/P:"); printk(args); printk("\n"); } } while (0)
-
-struct dib3000mc_state {
-	struct dvb_frontend demod;
-	struct dib3000mc_config *cfg;
-
-	u8 i2c_addr;
-	struct i2c_adapter *i2c_adap;
-
-	struct dibx000_i2c_master i2c_master;
-
-	u32 timf;
-
-	u32 current_bandwidth;
-
-	u16 dev_id;
-
-	u8 sfn_workaround_active :1;
-};
-
-static u16 dib3000mc_read_word(struct dib3000mc_state *state, u16 reg)
-{
-	u8 wb[2] = { (reg >> 8) | 0x80, reg & 0xff };
-	u8 rb[2];
-	struct i2c_msg msg[2] = {
-		{ .addr = state->i2c_addr >> 1, .flags = 0,        .buf = wb, .len = 2 },
-		{ .addr = state->i2c_addr >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2 },
-	};
-
-	if (i2c_transfer(state->i2c_adap, msg, 2) != 2)
-		dprintk("i2c read error on %d\n",reg);
-
-	return (rb[0] << 8) | rb[1];
-}
-
-static int dib3000mc_write_word(struct dib3000mc_state *state, u16 reg, u16 val)
-{
-	u8 b[4] = {
-		(reg >> 8) & 0xff, reg & 0xff,
-		(val >> 8) & 0xff, val & 0xff,
-	};
-	struct i2c_msg msg = {
-		.addr = state->i2c_addr >> 1, .flags = 0, .buf = b, .len = 4
-	};
-	return i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
-}
-
-static int dib3000mc_identify(struct dib3000mc_state *state)
-{
-	u16 value;
-	if ((value = dib3000mc_read_word(state, 1025)) != 0x01b3) {
-		dprintk("-E-  DiB3000MC/P: wrong Vendor ID (read=0x%x)\n",value);
-		return -EREMOTEIO;
-	}
-
-	value = dib3000mc_read_word(state, 1026);
-	if (value != 0x3001 && value != 0x3002) {
-		dprintk("-E-  DiB3000MC/P: wrong Device ID (%x)\n",value);
-		return -EREMOTEIO;
-	}
-	state->dev_id = value;
-
-	dprintk("-I-  found DiB3000MC/P: %x\n",state->dev_id);
-
-	return 0;
-}
-
-static int dib3000mc_set_timing(struct dib3000mc_state *state, s16 nfft, u32 bw, u8 update_offset)
-{
-	u32 timf;
-
-	if (state->timf == 0) {
-		timf = 1384402; // default value for 8MHz
-		if (update_offset)
-			msleep(200); // first time we do an update
-	} else
-		timf = state->timf;
-
-	timf *= (bw / 1000);
-
-	if (update_offset) {
-		s16 tim_offs = dib3000mc_read_word(state, 416);
-
-		if (tim_offs &  0x2000)
-			tim_offs -= 0x4000;
-
-		if (nfft == TRANSMISSION_MODE_2K)
-			tim_offs *= 4;
-
-		timf += tim_offs;
-		state->timf = timf / (bw / 1000);
-	}
-
-	dprintk("timf: %d\n", timf);
-
-	dib3000mc_write_word(state, 23, (u16) (timf >> 16));
-	dib3000mc_write_word(state, 24, (u16) (timf      ) & 0xffff);
-
-	return 0;
-}
-
-static int dib3000mc_setup_pwm_state(struct dib3000mc_state *state)
-{
-	u16 reg_51, reg_52 = state->cfg->agc->setup & 0xfefb;
-    if (state->cfg->pwm3_inversion) {
-		reg_51 =  (2 << 14) | (0 << 10) | (7 << 6) | (2 << 2) | (2 << 0);
-		reg_52 |= (1 << 2);
-	} else {
-		reg_51 = (2 << 14) | (4 << 10) | (7 << 6) | (2 << 2) | (2 << 0);
-		reg_52 |= (1 << 8);
-	}
-	dib3000mc_write_word(state, 51, reg_51);
-	dib3000mc_write_word(state, 52, reg_52);
-
-    if (state->cfg->use_pwm3)
-		dib3000mc_write_word(state, 245, (1 << 3) | (1 << 0));
-	else
-		dib3000mc_write_word(state, 245, 0);
-
-    dib3000mc_write_word(state, 1040, 0x3);
-	return 0;
-}
-
-static int dib3000mc_set_output_mode(struct dib3000mc_state *state, int mode)
-{
-	int    ret = 0;
-	u16 fifo_threshold = 1792;
-	u16 outreg = 0;
-	u16 outmode = 0;
-	u16 elecout = 1;
-	u16 smo_reg = dib3000mc_read_word(state, 206) & 0x0010; /* keep the pid_parse bit */
-
-	dprintk("-I-  Setting output mode for demod %p to %d\n",
-			&state->demod, mode);
-
-	switch (mode) {
-		case OUTMODE_HIGH_Z:  // disable
-			elecout = 0;
-			break;
-		case OUTMODE_MPEG2_PAR_GATED_CLK:   // STBs with parallel gated clock
-			outmode = 0;
-			break;
-		case OUTMODE_MPEG2_PAR_CONT_CLK:    // STBs with parallel continues clock
-			outmode = 1;
-			break;
-		case OUTMODE_MPEG2_SERIAL:          // STBs with serial input
-			outmode = 2;
-			break;
-		case OUTMODE_MPEG2_FIFO:            // e.g. USB feeding
-			elecout = 3;
-			/*ADDR @ 206 :
-			P_smo_error_discard  [1;6:6] = 0
-			P_smo_rs_discard     [1;5:5] = 0
-			P_smo_pid_parse      [1;4:4] = 0
-			P_smo_fifo_flush     [1;3:3] = 0
-			P_smo_mode           [2;2:1] = 11
-			P_smo_ovf_prot       [1;0:0] = 0
-			*/
-			smo_reg |= 3 << 1;
-			fifo_threshold = 512;
-			outmode = 5;
-			break;
-		case OUTMODE_DIVERSITY:
-			outmode = 4;
-			elecout = 1;
-			break;
-		default:
-			dprintk("Unhandled output_mode passed to be set for demod %p\n",&state->demod);
-			outmode = 0;
-			break;
-	}
-
-	if ((state->cfg->output_mpeg2_in_188_bytes))
-		smo_reg |= (1 << 5); // P_smo_rs_discard     [1;5:5] = 1
-
-	outreg = dib3000mc_read_word(state, 244) & 0x07FF;
-	outreg |= (outmode << 11);
-	ret |= dib3000mc_write_word(state,  244, outreg);
-	ret |= dib3000mc_write_word(state,  206, smo_reg);   /*smo_ mode*/
-	ret |= dib3000mc_write_word(state,  207, fifo_threshold); /* synchronous fread */
-	ret |= dib3000mc_write_word(state, 1040, elecout);         /* P_out_cfg */
-	return ret;
-}
-
-static int dib3000mc_set_bandwidth(struct dib3000mc_state *state, u32 bw)
-{
-	u16 bw_cfg[6] = { 0 };
-	u16 imp_bw_cfg[3] = { 0 };
-	u16 reg;
-
-/* settings here are for 27.7MHz */
-	switch (bw) {
-		case 8000:
-			bw_cfg[0] = 0x0019; bw_cfg[1] = 0x5c30; bw_cfg[2] = 0x0054; bw_cfg[3] = 0x88a0; bw_cfg[4] = 0x01a6; bw_cfg[5] = 0xab20;
-			imp_bw_cfg[0] = 0x04db; imp_bw_cfg[1] = 0x00db; imp_bw_cfg[2] = 0x00b7;
-			break;
-
-		case 7000:
-			bw_cfg[0] = 0x001c; bw_cfg[1] = 0xfba5; bw_cfg[2] = 0x0060; bw_cfg[3] = 0x9c25; bw_cfg[4] = 0x01e3; bw_cfg[5] = 0x0cb7;
-			imp_bw_cfg[0] = 0x04c0; imp_bw_cfg[1] = 0x00c0; imp_bw_cfg[2] = 0x00a0;
-			break;
-
-		case 6000:
-			bw_cfg[0] = 0x0021; bw_cfg[1] = 0xd040; bw_cfg[2] = 0x0070; bw_cfg[3] = 0xb62b; bw_cfg[4] = 0x0233; bw_cfg[5] = 0x8ed5;
-			imp_bw_cfg[0] = 0x04a5; imp_bw_cfg[1] = 0x00a5; imp_bw_cfg[2] = 0x0089;
-			break;
-
-		case 5000:
-			bw_cfg[0] = 0x0028; bw_cfg[1] = 0x9380; bw_cfg[2] = 0x0087; bw_cfg[3] = 0x4100; bw_cfg[4] = 0x02a4; bw_cfg[5] = 0x4500;
-			imp_bw_cfg[0] = 0x0489; imp_bw_cfg[1] = 0x0089; imp_bw_cfg[2] = 0x0072;
-			break;
-
-		default: return -EINVAL;
-	}
-
-	for (reg = 6; reg < 12; reg++)
-		dib3000mc_write_word(state, reg, bw_cfg[reg - 6]);
-	dib3000mc_write_word(state, 12, 0x0000);
-	dib3000mc_write_word(state, 13, 0x03e8);
-	dib3000mc_write_word(state, 14, 0x0000);
-	dib3000mc_write_word(state, 15, 0x03f2);
-	dib3000mc_write_word(state, 16, 0x0001);
-	dib3000mc_write_word(state, 17, 0xb0d0);
-	// P_sec_len
-	dib3000mc_write_word(state, 18, 0x0393);
-	dib3000mc_write_word(state, 19, 0x8700);
-
-	for (reg = 55; reg < 58; reg++)
-		dib3000mc_write_word(state, reg, imp_bw_cfg[reg - 55]);
-
-	// Timing configuration
-	dib3000mc_set_timing(state, TRANSMISSION_MODE_2K, bw, 0);
-
-	return 0;
-}
-
-static u16 impulse_noise_val[29] =
-
-{
-	0x38, 0x6d9, 0x3f28, 0x7a7, 0x3a74, 0x196, 0x32a, 0x48c, 0x3ffe, 0x7f3,
-	0x2d94, 0x76, 0x53d, 0x3ff8, 0x7e3, 0x3320, 0x76, 0x5b3, 0x3feb, 0x7d2,
-	0x365e, 0x76, 0x48c, 0x3ffe, 0x5b3, 0x3feb, 0x76, 0x0000, 0xd
-};
-
-static void dib3000mc_set_impulse_noise(struct dib3000mc_state *state, u8 mode, s16 nfft)
-{
-	u16 i;
-	for (i = 58; i < 87; i++)
-		dib3000mc_write_word(state, i, impulse_noise_val[i-58]);
-
-	if (nfft == TRANSMISSION_MODE_8K) {
-		dib3000mc_write_word(state, 58, 0x3b);
-		dib3000mc_write_word(state, 84, 0x00);
-		dib3000mc_write_word(state, 85, 0x8200);
-	}
-
-	dib3000mc_write_word(state, 34, 0x1294);
-	dib3000mc_write_word(state, 35, 0x1ff8);
-	if (mode == 1)
-		dib3000mc_write_word(state, 55, dib3000mc_read_word(state, 55) | (1 << 10));
-}
-
-static int dib3000mc_init(struct dvb_frontend *demod)
-{
-	struct dib3000mc_state *state = demod->demodulator_priv;
-	struct dibx000_agc_config *agc = state->cfg->agc;
-
-	// Restart Configuration
-	dib3000mc_write_word(state, 1027, 0x8000);
-	dib3000mc_write_word(state, 1027, 0x0000);
-
-	// power up the demod + mobility configuration
-	dib3000mc_write_word(state, 140, 0x0000);
-	dib3000mc_write_word(state, 1031, 0);
-
-	if (state->cfg->mobile_mode) {
-		dib3000mc_write_word(state, 139,  0x0000);
-		dib3000mc_write_word(state, 141,  0x0000);
-		dib3000mc_write_word(state, 175,  0x0002);
-		dib3000mc_write_word(state, 1032, 0x0000);
-	} else {
-		dib3000mc_write_word(state, 139,  0x0001);
-		dib3000mc_write_word(state, 141,  0x0000);
-		dib3000mc_write_word(state, 175,  0x0000);
-		dib3000mc_write_word(state, 1032, 0x012C);
-	}
-	dib3000mc_write_word(state, 1033, 0x0000);
-
-	// P_clk_cfg
-	dib3000mc_write_word(state, 1037, 0x3130);
-
-	// other configurations
-
-	// P_ctrl_sfreq
-	dib3000mc_write_word(state, 33, (5 << 0));
-	dib3000mc_write_word(state, 88, (1 << 10) | (0x10 << 0));
-
-	// Phase noise control
-	// P_fft_phacor_inh, P_fft_phacor_cpe, P_fft_powrange
-	dib3000mc_write_word(state, 99, (1 << 9) | (0x20 << 0));
-
-	if (state->cfg->phase_noise_mode == 0)
-		dib3000mc_write_word(state, 111, 0x00);
-	else
-		dib3000mc_write_word(state, 111, 0x02);
-
-	// P_agc_global
-	dib3000mc_write_word(state, 50, 0x8000);
-
-	// agc setup misc
-	dib3000mc_setup_pwm_state(state);
-
-	// P_agc_counter_lock
-	dib3000mc_write_word(state, 53, 0x87);
-	// P_agc_counter_unlock
-	dib3000mc_write_word(state, 54, 0x87);
-
-	/* agc */
-	dib3000mc_write_word(state, 36, state->cfg->max_time);
-	dib3000mc_write_word(state, 37, (state->cfg->agc_command1 << 13) | (state->cfg->agc_command2 << 12) | (0x1d << 0));
-	dib3000mc_write_word(state, 38, state->cfg->pwm3_value);
-	dib3000mc_write_word(state, 39, state->cfg->ln_adc_level);
-
-	// set_agc_loop_Bw
-	dib3000mc_write_word(state, 40, 0x0179);
-	dib3000mc_write_word(state, 41, 0x03f0);
-
-	dib3000mc_write_word(state, 42, agc->agc1_max);
-	dib3000mc_write_word(state, 43, agc->agc1_min);
-	dib3000mc_write_word(state, 44, agc->agc2_max);
-	dib3000mc_write_word(state, 45, agc->agc2_min);
-	dib3000mc_write_word(state, 46, (agc->agc1_pt1 << 8) | agc->agc1_pt2);
-	dib3000mc_write_word(state, 47, (agc->agc1_slope1 << 8) | agc->agc1_slope2);
-	dib3000mc_write_word(state, 48, (agc->agc2_pt1 << 8) | agc->agc2_pt2);
-	dib3000mc_write_word(state, 49, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
-
-// Begin: TimeOut registers
-	// P_pha3_thres
-	dib3000mc_write_word(state, 110, 3277);
-	// P_timf_alpha = 6, P_corm_alpha = 6, P_corm_thres = 0x80
-	dib3000mc_write_word(state,  26, 0x6680);
-	// lock_mask0
-	dib3000mc_write_word(state, 1, 4);
-	// lock_mask1
-	dib3000mc_write_word(state, 2, 4);
-	// lock_mask2
-	dib3000mc_write_word(state, 3, 0x1000);
-	// P_search_maxtrial=1
-	dib3000mc_write_word(state, 5, 1);
-
-	dib3000mc_set_bandwidth(state, 8000);
-
-	// div_lock_mask
-	dib3000mc_write_word(state,  4, 0x814);
-
-	dib3000mc_write_word(state, 21, (1 << 9) | 0x164);
-	dib3000mc_write_word(state, 22, 0x463d);
-
-	// Spurious rm cfg
-	// P_cspu_regul, P_cspu_win_cut
-	dib3000mc_write_word(state, 120, 0x200f);
-	// P_adp_selec_monit
-	dib3000mc_write_word(state, 134, 0);
-
-	// Fec cfg
-	dib3000mc_write_word(state, 195, 0x10);
-
-	// diversity register: P_dvsy_sync_wait..
-	dib3000mc_write_word(state, 180, 0x2FF0);
-
-	// Impulse noise configuration
-	dib3000mc_set_impulse_noise(state, 0, TRANSMISSION_MODE_8K);
-
-	// output mode set-up
-	dib3000mc_set_output_mode(state, OUTMODE_HIGH_Z);
-
-	/* close the i2c-gate */
-	dib3000mc_write_word(state, 769, (1 << 7) );
-
-	return 0;
-}
-
-static int dib3000mc_sleep(struct dvb_frontend *demod)
-{
-	struct dib3000mc_state *state = demod->demodulator_priv;
-
-	dib3000mc_write_word(state, 1031, 0xFFFF);
-	dib3000mc_write_word(state, 1032, 0xFFFF);
-	dib3000mc_write_word(state, 1033, 0xFFF0);
-
-    return 0;
-}
-
-static void dib3000mc_set_adp_cfg(struct dib3000mc_state *state, s16 qam)
-{
-	u16 cfg[4] = { 0 },reg;
-	switch (qam) {
-		case QPSK:
-			cfg[0] = 0x099a; cfg[1] = 0x7fae; cfg[2] = 0x0333; cfg[3] = 0x7ff0;
-			break;
-		case QAM_16:
-			cfg[0] = 0x023d; cfg[1] = 0x7fdf; cfg[2] = 0x00a4; cfg[3] = 0x7ff0;
-			break;
-		case QAM_64:
-			cfg[0] = 0x0148; cfg[1] = 0x7ff0; cfg[2] = 0x00a4; cfg[3] = 0x7ff8;
-			break;
-	}
-	for (reg = 129; reg < 133; reg++)
-		dib3000mc_write_word(state, reg, cfg[reg - 129]);
-}
-
-static void dib3000mc_set_channel_cfg(struct dib3000mc_state *state,
-				      struct dtv_frontend_properties *ch, u16 seq)
-{
-	u16 value;
-	u32 bw = BANDWIDTH_TO_KHZ(ch->bandwidth_hz);
-
-	dib3000mc_set_bandwidth(state, bw);
-	dib3000mc_set_timing(state, ch->transmission_mode, bw, 0);
-
-//	if (boost)
-//		dib3000mc_write_word(state, 100, (11 << 6) + 6);
-//	else
-		dib3000mc_write_word(state, 100, (16 << 6) + 9);
-
-	dib3000mc_write_word(state, 1027, 0x0800);
-	dib3000mc_write_word(state, 1027, 0x0000);
-
-	//Default cfg isi offset adp
-	dib3000mc_write_word(state, 26,  0x6680);
-	dib3000mc_write_word(state, 29,  0x1273);
-	dib3000mc_write_word(state, 33,       5);
-	dib3000mc_set_adp_cfg(state, QAM_16);
-	dib3000mc_write_word(state, 133,  15564);
-
-	dib3000mc_write_word(state, 12 , 0x0);
-	dib3000mc_write_word(state, 13 , 0x3e8);
-	dib3000mc_write_word(state, 14 , 0x0);
-	dib3000mc_write_word(state, 15 , 0x3f2);
-
-	dib3000mc_write_word(state, 93,0);
-	dib3000mc_write_word(state, 94,0);
-	dib3000mc_write_word(state, 95,0);
-	dib3000mc_write_word(state, 96,0);
-	dib3000mc_write_word(state, 97,0);
-	dib3000mc_write_word(state, 98,0);
-
-	dib3000mc_set_impulse_noise(state, 0, ch->transmission_mode);
-
-	value = 0;
-	switch (ch->transmission_mode) {
-		case TRANSMISSION_MODE_2K: value |= (0 << 7); break;
-		default:
-		case TRANSMISSION_MODE_8K: value |= (1 << 7); break;
-	}
-	switch (ch->guard_interval) {
-		case GUARD_INTERVAL_1_32: value |= (0 << 5); break;
-		case GUARD_INTERVAL_1_16: value |= (1 << 5); break;
-		case GUARD_INTERVAL_1_4:  value |= (3 << 5); break;
-		default:
-		case GUARD_INTERVAL_1_8:  value |= (2 << 5); break;
-	}
-	switch (ch->modulation) {
-		case QPSK:  value |= (0 << 3); break;
-		case QAM_16: value |= (1 << 3); break;
-		default:
-		case QAM_64: value |= (2 << 3); break;
-	}
-	switch (HIERARCHY_1) {
-		case HIERARCHY_2: value |= 2; break;
-		case HIERARCHY_4: value |= 4; break;
-		default:
-		case HIERARCHY_1: value |= 1; break;
-	}
-	dib3000mc_write_word(state, 0, value);
-	dib3000mc_write_word(state, 5, (1 << 8) | ((seq & 0xf) << 4));
-
-	value = 0;
-	if (ch->hierarchy == 1)
-		value |= (1 << 4);
-	if (1 == 1)
-		value |= 1;
-	switch ((ch->hierarchy == 0 || 1 == 1) ? ch->code_rate_HP : ch->code_rate_LP) {
-		case FEC_2_3: value |= (2 << 1); break;
-		case FEC_3_4: value |= (3 << 1); break;
-		case FEC_5_6: value |= (5 << 1); break;
-		case FEC_7_8: value |= (7 << 1); break;
-		default:
-		case FEC_1_2: value |= (1 << 1); break;
-	}
-	dib3000mc_write_word(state, 181, value);
-
-	// diversity synchro delay add 50% SFN margin
-	switch (ch->transmission_mode) {
-		case TRANSMISSION_MODE_8K: value = 256; break;
-		case TRANSMISSION_MODE_2K:
-		default: value = 64; break;
-	}
-	switch (ch->guard_interval) {
-		case GUARD_INTERVAL_1_16: value *= 2; break;
-		case GUARD_INTERVAL_1_8:  value *= 4; break;
-		case GUARD_INTERVAL_1_4:  value *= 8; break;
-		default:
-		case GUARD_INTERVAL_1_32: value *= 1; break;
-	}
-	value <<= 4;
-	value |= dib3000mc_read_word(state, 180) & 0x000f;
-	dib3000mc_write_word(state, 180, value);
-
-	// restart demod
-	value = dib3000mc_read_word(state, 0);
-	dib3000mc_write_word(state, 0, value | (1 << 9));
-	dib3000mc_write_word(state, 0, value);
-
-	msleep(30);
-
-	dib3000mc_set_impulse_noise(state, state->cfg->impulse_noise_mode, ch->transmission_mode);
-}
-
-static int dib3000mc_autosearch_start(struct dvb_frontend *demod)
-{
-	struct dtv_frontend_properties *chan = &demod->dtv_property_cache;
-	struct dib3000mc_state *state = demod->demodulator_priv;
-	u16 reg;
-//	u32 val;
-	struct dtv_frontend_properties schan;
-
-	schan = *chan;
-
-	/* TODO what is that ? */
-
-	/* a channel for autosearch */
-	schan.transmission_mode = TRANSMISSION_MODE_8K;
-	schan.guard_interval = GUARD_INTERVAL_1_32;
-	schan.modulation = QAM_64;
-	schan.code_rate_HP = FEC_2_3;
-	schan.code_rate_LP = FEC_2_3;
-	schan.hierarchy = 0;
-
-	dib3000mc_set_channel_cfg(state, &schan, 11);
-
-	reg = dib3000mc_read_word(state, 0);
-	dib3000mc_write_word(state, 0, reg | (1 << 8));
-	dib3000mc_read_word(state, 511);
-	dib3000mc_write_word(state, 0, reg);
-
-	return 0;
-}
-
-static int dib3000mc_autosearch_is_irq(struct dvb_frontend *demod)
-{
-	struct dib3000mc_state *state = demod->demodulator_priv;
-	u16 irq_pending = dib3000mc_read_word(state, 511);
-
-	if (irq_pending & 0x1) // failed
-		return 1;
-
-	if (irq_pending & 0x2) // succeeded
-		return 2;
-
-	return 0; // still pending
-}
-
-static int dib3000mc_tune(struct dvb_frontend *demod)
-{
-	struct dtv_frontend_properties *ch = &demod->dtv_property_cache;
-	struct dib3000mc_state *state = demod->demodulator_priv;
-
-	// ** configure demod **
-	dib3000mc_set_channel_cfg(state, ch, 0);
-
-	// activates isi
-	if (state->sfn_workaround_active) {
-		dprintk("SFN workaround is active\n");
-		dib3000mc_write_word(state, 29, 0x1273);
-		dib3000mc_write_word(state, 108, 0x4000); // P_pha3_force_pha_shift
-	} else {
-		dib3000mc_write_word(state, 29, 0x1073);
-		dib3000mc_write_word(state, 108, 0x0000); // P_pha3_force_pha_shift
-	}
-
-	dib3000mc_set_adp_cfg(state, (u8)ch->modulation);
-	if (ch->transmission_mode == TRANSMISSION_MODE_8K) {
-		dib3000mc_write_word(state, 26, 38528);
-		dib3000mc_write_word(state, 33, 8);
-	} else {
-		dib3000mc_write_word(state, 26, 30336);
-		dib3000mc_write_word(state, 33, 6);
-	}
-
-	if (dib3000mc_read_word(state, 509) & 0x80)
-		dib3000mc_set_timing(state, ch->transmission_mode,
-				     BANDWIDTH_TO_KHZ(ch->bandwidth_hz), 1);
-
-	return 0;
-}
-
-struct i2c_adapter * dib3000mc_get_tuner_i2c_master(struct dvb_frontend *demod, int gating)
-{
-	struct dib3000mc_state *st = demod->demodulator_priv;
-	return dibx000_get_i2c_adapter(&st->i2c_master, DIBX000_I2C_INTERFACE_TUNER, gating);
-}
-
-EXPORT_SYMBOL(dib3000mc_get_tuner_i2c_master);
-
-static int dib3000mc_get_frontend(struct dvb_frontend* fe)
-{
-	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
-	struct dib3000mc_state *state = fe->demodulator_priv;
-	u16 tps = dib3000mc_read_word(state,458);
-
-	fep->inversion = INVERSION_AUTO;
-
-	fep->bandwidth_hz = state->current_bandwidth;
-
-	switch ((tps >> 8) & 0x1) {
-		case 0: fep->transmission_mode = TRANSMISSION_MODE_2K; break;
-		case 1: fep->transmission_mode = TRANSMISSION_MODE_8K; break;
-	}
-
-	switch (tps & 0x3) {
-		case 0: fep->guard_interval = GUARD_INTERVAL_1_32; break;
-		case 1: fep->guard_interval = GUARD_INTERVAL_1_16; break;
-		case 2: fep->guard_interval = GUARD_INTERVAL_1_8; break;
-		case 3: fep->guard_interval = GUARD_INTERVAL_1_4; break;
-	}
-
-	switch ((tps >> 13) & 0x3) {
-		case 0: fep->modulation = QPSK; break;
-		case 1: fep->modulation = QAM_16; break;
-		case 2:
-		default: fep->modulation = QAM_64; break;
-	}
-
-	/* as long as the frontend_param structure is fixed for hierarchical transmission I refuse to use it */
-	/* (tps >> 12) & 0x1 == hrch is used, (tps >> 9) & 0x7 == alpha */
-
-	fep->hierarchy = HIERARCHY_NONE;
-	switch ((tps >> 5) & 0x7) {
-		case 1: fep->code_rate_HP = FEC_1_2; break;
-		case 2: fep->code_rate_HP = FEC_2_3; break;
-		case 3: fep->code_rate_HP = FEC_3_4; break;
-		case 5: fep->code_rate_HP = FEC_5_6; break;
-		case 7:
-		default: fep->code_rate_HP = FEC_7_8; break;
-
-	}
-
-	switch ((tps >> 2) & 0x7) {
-		case 1: fep->code_rate_LP = FEC_1_2; break;
-		case 2: fep->code_rate_LP = FEC_2_3; break;
-		case 3: fep->code_rate_LP = FEC_3_4; break;
-		case 5: fep->code_rate_LP = FEC_5_6; break;
-		case 7:
-		default: fep->code_rate_LP = FEC_7_8; break;
-	}
-
-	return 0;
-}
-
-static int dib3000mc_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
-	struct dib3000mc_state *state = fe->demodulator_priv;
-	int ret;
-
-	dib3000mc_set_output_mode(state, OUTMODE_HIGH_Z);
-
-	state->current_bandwidth = fep->bandwidth_hz;
-	dib3000mc_set_bandwidth(state, BANDWIDTH_TO_KHZ(fep->bandwidth_hz));
-
-	/* maybe the parameter has been changed */
-	state->sfn_workaround_active = buggy_sfn_workaround;
-
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		msleep(100);
-	}
-
-	if (fep->transmission_mode  == TRANSMISSION_MODE_AUTO ||
-	    fep->guard_interval == GUARD_INTERVAL_AUTO ||
-	    fep->modulation     == QAM_AUTO ||
-	    fep->code_rate_HP   == FEC_AUTO) {
-		int i = 1000, found;
-
-		dib3000mc_autosearch_start(fe);
-		do {
-			msleep(1);
-			found = dib3000mc_autosearch_is_irq(fe);
-		} while (found == 0 && i--);
-
-		dprintk("autosearch returns: %d\n",found);
-		if (found == 0 || found == 1)
-			return 0; // no channel found
-
-		dib3000mc_get_frontend(fe);
-	}
-
-	ret = dib3000mc_tune(fe);
-
-	/* make this a config parameter */
-	dib3000mc_set_output_mode(state, OUTMODE_MPEG2_FIFO);
-	return ret;
-}
-
-static int dib3000mc_read_status(struct dvb_frontend *fe, fe_status_t *stat)
-{
-	struct dib3000mc_state *state = fe->demodulator_priv;
-	u16 lock = dib3000mc_read_word(state, 509);
-
-	*stat = 0;
-
-	if (lock & 0x8000)
-		*stat |= FE_HAS_SIGNAL;
-	if (lock & 0x3000)
-		*stat |= FE_HAS_CARRIER;
-	if (lock & 0x0100)
-		*stat |= FE_HAS_VITERBI;
-	if (lock & 0x0010)
-		*stat |= FE_HAS_SYNC;
-	if (lock & 0x0008)
-		*stat |= FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int dib3000mc_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct dib3000mc_state *state = fe->demodulator_priv;
-	*ber = (dib3000mc_read_word(state, 500) << 16) | dib3000mc_read_word(state, 501);
-	return 0;
-}
-
-static int dib3000mc_read_unc_blocks(struct dvb_frontend *fe, u32 *unc)
-{
-	struct dib3000mc_state *state = fe->demodulator_priv;
-	*unc = dib3000mc_read_word(state, 508);
-	return 0;
-}
-
-static int dib3000mc_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	struct dib3000mc_state *state = fe->demodulator_priv;
-	u16 val = dib3000mc_read_word(state, 392);
-	*strength = 65535 - val;
-	return 0;
-}
-
-static int dib3000mc_read_snr(struct dvb_frontend* fe, u16 *snr)
-{
-	*snr = 0x0000;
-	return 0;
-}
-
-static int dib3000mc_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
-{
-	tune->min_delay_ms = 1000;
-	return 0;
-}
-
-static void dib3000mc_release(struct dvb_frontend *fe)
-{
-	struct dib3000mc_state *state = fe->demodulator_priv;
-	dibx000_exit_i2c_master(&state->i2c_master);
-	kfree(state);
-}
-
-int dib3000mc_pid_control(struct dvb_frontend *fe, int index, int pid,int onoff)
-{
-	struct dib3000mc_state *state = fe->demodulator_priv;
-	dib3000mc_write_word(state, 212 + index,  onoff ? (1 << 13) | pid : 0);
-	return 0;
-}
-EXPORT_SYMBOL(dib3000mc_pid_control);
-
-int dib3000mc_pid_parse(struct dvb_frontend *fe, int onoff)
-{
-	struct dib3000mc_state *state = fe->demodulator_priv;
-	u16 tmp = dib3000mc_read_word(state, 206) & ~(1 << 4);
-	tmp |= (onoff << 4);
-	return dib3000mc_write_word(state, 206, tmp);
-}
-EXPORT_SYMBOL(dib3000mc_pid_parse);
-
-void dib3000mc_set_config(struct dvb_frontend *fe, struct dib3000mc_config *cfg)
-{
-	struct dib3000mc_state *state = fe->demodulator_priv;
-	state->cfg = cfg;
-}
-EXPORT_SYMBOL(dib3000mc_set_config);
-
-int dib3000mc_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib3000mc_config cfg[])
-{
-	struct dib3000mc_state *dmcst;
-	int k;
-	u8 new_addr;
-
-	static u8 DIB3000MC_I2C_ADDRESS[] = {20,22,24,26};
-
-	dmcst = kzalloc(sizeof(struct dib3000mc_state), GFP_KERNEL);
-	if (dmcst == NULL)
-		return -ENOMEM;
-
-	dmcst->i2c_adap = i2c;
-
-	for (k = no_of_demods-1; k >= 0; k--) {
-		dmcst->cfg = &cfg[k];
-
-		/* designated i2c address */
-		new_addr          = DIB3000MC_I2C_ADDRESS[k];
-		dmcst->i2c_addr = new_addr;
-		if (dib3000mc_identify(dmcst) != 0) {
-			dmcst->i2c_addr = default_addr;
-			if (dib3000mc_identify(dmcst) != 0) {
-				dprintk("-E-  DiB3000P/MC #%d: not identified\n", k);
-				kfree(dmcst);
-				return -ENODEV;
-			}
-		}
-
-		dib3000mc_set_output_mode(dmcst, OUTMODE_MPEG2_PAR_CONT_CLK);
-
-		// set new i2c address and force divstr (Bit 1) to value 0 (Bit 0)
-		dib3000mc_write_word(dmcst, 1024, (new_addr << 3) | 0x1);
-		dmcst->i2c_addr = new_addr;
-	}
-
-	for (k = 0; k < no_of_demods; k++) {
-		dmcst->cfg = &cfg[k];
-		dmcst->i2c_addr = DIB3000MC_I2C_ADDRESS[k];
-
-		dib3000mc_write_word(dmcst, 1024, dmcst->i2c_addr << 3);
-
-		/* turn off data output */
-		dib3000mc_set_output_mode(dmcst, OUTMODE_HIGH_Z);
-	}
-
-	kfree(dmcst);
-	return 0;
-}
-EXPORT_SYMBOL(dib3000mc_i2c_enumeration);
-
-static struct dvb_frontend_ops dib3000mc_ops;
-
-struct dvb_frontend * dib3000mc_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib3000mc_config *cfg)
-{
-	struct dvb_frontend *demod;
-	struct dib3000mc_state *st;
-	st = kzalloc(sizeof(struct dib3000mc_state), GFP_KERNEL);
-	if (st == NULL)
-		return NULL;
-
-	st->cfg = cfg;
-	st->i2c_adap = i2c_adap;
-	st->i2c_addr = i2c_addr;
-
-	demod                   = &st->demod;
-	demod->demodulator_priv = st;
-	memcpy(&st->demod.ops, &dib3000mc_ops, sizeof(struct dvb_frontend_ops));
-
-	if (dib3000mc_identify(st) != 0)
-		goto error;
-
-	dibx000_init_i2c_master(&st->i2c_master, DIB3000MC, st->i2c_adap, st->i2c_addr);
-
-	dib3000mc_write_word(st, 1037, 0x3130);
-
-	return demod;
-
-error:
-	kfree(st);
-	return NULL;
-}
-EXPORT_SYMBOL(dib3000mc_attach);
-
-static struct dvb_frontend_ops dib3000mc_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name = "DiBcom 3000MC/P",
-		.frequency_min      = 44250000,
-		.frequency_max      = 867250000,
-		.frequency_stepsize = 62500,
-		.caps = FE_CAN_INVERSION_AUTO |
-			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO |
-			FE_CAN_GUARD_INTERVAL_AUTO |
-			FE_CAN_RECOVER |
-			FE_CAN_HIERARCHY_AUTO,
-	},
-
-	.release              = dib3000mc_release,
-
-	.init                 = dib3000mc_init,
-	.sleep                = dib3000mc_sleep,
-
-	.set_frontend         = dib3000mc_set_frontend,
-	.get_tune_settings    = dib3000mc_fe_get_tune_settings,
-	.get_frontend         = dib3000mc_get_frontend,
-
-	.read_status          = dib3000mc_read_status,
-	.read_ber             = dib3000mc_read_ber,
-	.read_signal_strength = dib3000mc_read_signal_strength,
-	.read_snr             = dib3000mc_read_snr,
-	.read_ucblocks        = dib3000mc_read_unc_blocks,
-};
-
-MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
-MODULE_DESCRIPTION("Driver for the DiBcom 3000MC/P COFDM demodulator");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/dib3000mc.h b/drivers/media/dvb/frontends/dib3000mc.h
deleted file mode 100644
index d75ffad..0000000
--- a/drivers/media/dvb/frontends/dib3000mc.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Driver for DiBcom DiB3000MC/P-demodulator.
- *
- * Copyright (C) 2004-6 DiBcom (http://www.dibcom.fr/)
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher\@desy.de)
- *
- * This code is partially based on the previous dib3000mc.c .
- *
- * This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- */
-#ifndef DIB3000MC_H
-#define DIB3000MC_H
-
-#include "dibx000_common.h"
-
-struct dib3000mc_config {
-	struct dibx000_agc_config *agc;
-
-	u8 phase_noise_mode;
-	u8 impulse_noise_mode;
-
-	u8  pwm3_inversion;
-	u8  use_pwm3;
-	u16 pwm3_value;
-
-	u16 max_time;
-	u16 ln_adc_level;
-
-	u8 agc_command1 :1;
-	u8 agc_command2 :1;
-
-	u8 mobile_mode;
-
-	u8 output_mpeg2_in_188_bytes;
-};
-
-#define DEFAULT_DIB3000MC_I2C_ADDRESS 16
-#define DEFAULT_DIB3000P_I2C_ADDRESS  24
-
-#if defined(CONFIG_DVB_DIB3000MC) || (defined(CONFIG_DVB_DIB3000MC_MODULE) && \
-				      defined(MODULE))
-extern struct dvb_frontend *dib3000mc_attach(struct i2c_adapter *i2c_adap,
-					     u8 i2c_addr,
-					     struct dib3000mc_config *cfg);
-extern int dib3000mc_i2c_enumeration(struct i2c_adapter *i2c,
-				     int no_of_demods, u8 default_addr,
-				     struct dib3000mc_config cfg[]);
-extern
-struct i2c_adapter *dib3000mc_get_tuner_i2c_master(struct dvb_frontend *demod,
-						   int gating);
-#else
-static inline
-struct dvb_frontend *dib3000mc_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr,
-				      struct dib3000mc_config *cfg)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-static inline
-int dib3000mc_i2c_enumeration(struct i2c_adapter *i2c,
-			      int no_of_demods, u8 default_addr,
-			      struct dib3000mc_config cfg[])
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline
-struct i2c_adapter *dib3000mc_get_tuner_i2c_master(struct dvb_frontend *demod,
-						   int gating)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_DIB3000MC
-
-extern int dib3000mc_pid_control(struct dvb_frontend *fe, int index, int pid,int onoff);
-extern int dib3000mc_pid_parse(struct dvb_frontend *fe, int onoff);
-
-extern void dib3000mc_set_config(struct dvb_frontend *, struct dib3000mc_config *);
-
-#endif
diff --git a/drivers/media/dvb/frontends/dib7000m.c b/drivers/media/dvb/frontends/dib7000m.c
deleted file mode 100644
index 148bf79..0000000
--- a/drivers/media/dvb/frontends/dib7000m.c
+++ /dev/null
@@ -1,1473 +0,0 @@
-/*
- * Linux-DVB Driver for DiBcom's DiB7000M and
- *              first generation DiB7000P-demodulator-family.
- *
- * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/)
- *
- * This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- */
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-
-#include "dvb_frontend.h"
-
-#include "dib7000m.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
-
-#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000M: "); printk(args); printk("\n"); } } while (0)
-
-struct dib7000m_state {
-	struct dvb_frontend demod;
-    struct dib7000m_config cfg;
-
-	u8 i2c_addr;
-	struct i2c_adapter   *i2c_adap;
-
-	struct dibx000_i2c_master i2c_master;
-
-/* offset is 1 in case of the 7000MC */
-	u8 reg_offs;
-
-	u16 wbd_ref;
-
-	u8 current_band;
-	u32 current_bandwidth;
-	struct dibx000_agc_config *current_agc;
-	u32 timf;
-	u32 timf_default;
-	u32 internal_clk;
-
-	u8 div_force_off : 1;
-	u8 div_state : 1;
-	u16 div_sync_wait;
-
-	u16 revision;
-
-	u8 agc_state;
-
-	/* for the I2C transfer */
-	struct i2c_msg msg[2];
-	u8 i2c_write_buffer[4];
-	u8 i2c_read_buffer[2];
-	struct mutex i2c_buffer_lock;
-};
-
-enum dib7000m_power_mode {
-	DIB7000M_POWER_ALL = 0,
-
-	DIB7000M_POWER_NO,
-	DIB7000M_POWER_INTERF_ANALOG_AGC,
-	DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD,
-	DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD,
-	DIB7000M_POWER_INTERFACE_ONLY,
-};
-
-static u16 dib7000m_read_word(struct dib7000m_state *state, u16 reg)
-{
-	u16 ret;
-
-	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
-		return 0;
-	}
-
-	state->i2c_write_buffer[0] = (reg >> 8) | 0x80;
-	state->i2c_write_buffer[1] = reg & 0xff;
-
-	memset(state->msg, 0, 2 * sizeof(struct i2c_msg));
-	state->msg[0].addr = state->i2c_addr >> 1;
-	state->msg[0].flags = 0;
-	state->msg[0].buf = state->i2c_write_buffer;
-	state->msg[0].len = 2;
-	state->msg[1].addr = state->i2c_addr >> 1;
-	state->msg[1].flags = I2C_M_RD;
-	state->msg[1].buf = state->i2c_read_buffer;
-	state->msg[1].len = 2;
-
-	if (i2c_transfer(state->i2c_adap, state->msg, 2) != 2)
-		dprintk("i2c read error on %d",reg);
-
-	ret = (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1];
-	mutex_unlock(&state->i2c_buffer_lock);
-
-	return ret;
-}
-
-static int dib7000m_write_word(struct dib7000m_state *state, u16 reg, u16 val)
-{
-	int ret;
-
-	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
-		return -EINVAL;
-	}
-
-	state->i2c_write_buffer[0] = (reg >> 8) & 0xff;
-	state->i2c_write_buffer[1] = reg & 0xff;
-	state->i2c_write_buffer[2] = (val >> 8) & 0xff;
-	state->i2c_write_buffer[3] = val & 0xff;
-
-	memset(&state->msg[0], 0, sizeof(struct i2c_msg));
-	state->msg[0].addr = state->i2c_addr >> 1;
-	state->msg[0].flags = 0;
-	state->msg[0].buf = state->i2c_write_buffer;
-	state->msg[0].len = 4;
-
-	ret = (i2c_transfer(state->i2c_adap, state->msg, 1) != 1 ?
-			-EREMOTEIO : 0);
-	mutex_unlock(&state->i2c_buffer_lock);
-	return ret;
-}
-static void dib7000m_write_tab(struct dib7000m_state *state, u16 *buf)
-{
-	u16 l = 0, r, *n;
-	n = buf;
-	l = *n++;
-	while (l) {
-		r = *n++;
-
-		if (state->reg_offs && (r >= 112 && r <= 331)) // compensate for 7000MC
-			r++;
-
-		do {
-			dib7000m_write_word(state, r, *n++);
-			r++;
-		} while (--l);
-		l = *n++;
-	}
-}
-
-static int dib7000m_set_output_mode(struct dib7000m_state *state, int mode)
-{
-	int    ret = 0;
-	u16 outreg, fifo_threshold, smo_mode,
-		sram = 0x0005; /* by default SRAM output is disabled */
-
-	outreg = 0;
-	fifo_threshold = 1792;
-	smo_mode = (dib7000m_read_word(state, 294 + state->reg_offs) & 0x0010) | (1 << 1);
-
-	dprintk( "setting output mode for demod %p to %d", &state->demod, mode);
-
-	switch (mode) {
-		case OUTMODE_MPEG2_PAR_GATED_CLK:   // STBs with parallel gated clock
-			outreg = (1 << 10);  /* 0x0400 */
-			break;
-		case OUTMODE_MPEG2_PAR_CONT_CLK:    // STBs with parallel continues clock
-			outreg = (1 << 10) | (1 << 6); /* 0x0440 */
-			break;
-		case OUTMODE_MPEG2_SERIAL:          // STBs with serial input
-			outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0482 */
-			break;
-		case OUTMODE_DIVERSITY:
-			if (state->cfg.hostbus_diversity)
-				outreg = (1 << 10) | (4 << 6); /* 0x0500 */
-			else
-				sram   |= 0x0c00;
-			break;
-		case OUTMODE_MPEG2_FIFO:            // e.g. USB feeding
-			smo_mode |= (3 << 1);
-			fifo_threshold = 512;
-			outreg = (1 << 10) | (5 << 6);
-			break;
-		case OUTMODE_HIGH_Z:  // disable
-			outreg = 0;
-			break;
-		default:
-			dprintk( "Unhandled output_mode passed to be set for demod %p",&state->demod);
-			break;
-	}
-
-	if (state->cfg.output_mpeg2_in_188_bytes)
-		smo_mode |= (1 << 5) ;
-
-	ret |= dib7000m_write_word(state,  294 + state->reg_offs, smo_mode);
-	ret |= dib7000m_write_word(state,  295 + state->reg_offs, fifo_threshold); /* synchronous fread */
-	ret |= dib7000m_write_word(state, 1795, outreg);
-	ret |= dib7000m_write_word(state, 1805, sram);
-
-	if (state->revision == 0x4003) {
-		u16 clk_cfg1 = dib7000m_read_word(state, 909) & 0xfffd;
-		if (mode == OUTMODE_DIVERSITY)
-			clk_cfg1 |= (1 << 1); // P_O_CLK_en
-		dib7000m_write_word(state, 909, clk_cfg1);
-	}
-	return ret;
-}
-
-static void dib7000m_set_power_mode(struct dib7000m_state *state, enum dib7000m_power_mode mode)
-{
-	/* by default everything is going to be powered off */
-	u16 reg_903 = 0xffff, reg_904 = 0xffff, reg_905 = 0xffff, reg_906  = 0x3fff;
-	u8  offset = 0;
-
-	/* now, depending on the requested mode, we power on */
-	switch (mode) {
-		/* power up everything in the demod */
-		case DIB7000M_POWER_ALL:
-			reg_903 = 0x0000; reg_904 = 0x0000; reg_905 = 0x0000; reg_906 = 0x0000;
-			break;
-
-		/* just leave power on the control-interfaces: GPIO and (I2C or SDIO or SRAM) */
-		case DIB7000M_POWER_INTERFACE_ONLY: /* TODO power up either SDIO or I2C or SRAM */
-			reg_905 &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 2));
-			break;
-
-		case DIB7000M_POWER_INTERF_ANALOG_AGC:
-			reg_903 &= ~((1 << 15) | (1 << 14) | (1 << 11) | (1 << 10));
-			reg_905 &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 4) | (1 << 2));
-			reg_906 &= ~((1 << 0));
-			break;
-
-		case DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD:
-			reg_903 = 0x0000; reg_904 = 0x801f; reg_905 = 0x0000; reg_906 = 0x0000;
-			break;
-
-		case DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD:
-			reg_903 = 0x0000; reg_904 = 0x8000; reg_905 = 0x010b; reg_906 = 0x0000;
-			break;
-		case DIB7000M_POWER_NO:
-			break;
-	}
-
-	/* always power down unused parts */
-	if (!state->cfg.mobile_mode)
-		reg_904 |= (1 << 7) | (1 << 6) | (1 << 4) | (1 << 2) | (1 << 1);
-
-	/* P_sdio_select_clk = 0 on MC and after*/
-	if (state->revision != 0x4000)
-		reg_906 <<= 1;
-
-	if (state->revision == 0x4003)
-		offset = 1;
-
-	dib7000m_write_word(state, 903 + offset, reg_903);
-	dib7000m_write_word(state, 904 + offset, reg_904);
-	dib7000m_write_word(state, 905 + offset, reg_905);
-	dib7000m_write_word(state, 906 + offset, reg_906);
-}
-
-static int dib7000m_set_adc_state(struct dib7000m_state *state, enum dibx000_adc_states no)
-{
-	int ret = 0;
-	u16 reg_913 = dib7000m_read_word(state, 913),
-	       reg_914 = dib7000m_read_word(state, 914);
-
-	switch (no) {
-		case DIBX000_SLOW_ADC_ON:
-			reg_914 |= (1 << 1) | (1 << 0);
-			ret |= dib7000m_write_word(state, 914, reg_914);
-			reg_914 &= ~(1 << 1);
-			break;
-
-		case DIBX000_SLOW_ADC_OFF:
-			reg_914 |=  (1 << 1) | (1 << 0);
-			break;
-
-		case DIBX000_ADC_ON:
-			if (state->revision == 0x4000) { // workaround for PA/MA
-				// power-up ADC
-				dib7000m_write_word(state, 913, 0);
-				dib7000m_write_word(state, 914, reg_914 & 0x3);
-				// power-down bandgag
-				dib7000m_write_word(state, 913, (1 << 15));
-				dib7000m_write_word(state, 914, reg_914 & 0x3);
-			}
-
-			reg_913 &= 0x0fff;
-			reg_914 &= 0x0003;
-			break;
-
-		case DIBX000_ADC_OFF: // leave the VBG voltage on
-			reg_913 |= (1 << 14) | (1 << 13) | (1 << 12);
-			reg_914 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2);
-			break;
-
-		case DIBX000_VBG_ENABLE:
-			reg_913 &= ~(1 << 15);
-			break;
-
-		case DIBX000_VBG_DISABLE:
-			reg_913 |= (1 << 15);
-			break;
-
-		default:
-			break;
-	}
-
-//	dprintk( "913: %x, 914: %x", reg_913, reg_914);
-	ret |= dib7000m_write_word(state, 913, reg_913);
-	ret |= dib7000m_write_word(state, 914, reg_914);
-
-	return ret;
-}
-
-static int dib7000m_set_bandwidth(struct dib7000m_state *state, u32 bw)
-{
-	u32 timf;
-
-	if (!bw)
-		bw = 8000;
-
-	// store the current bandwidth for later use
-	state->current_bandwidth = bw;
-
-	if (state->timf == 0) {
-		dprintk( "using default timf");
-		timf = state->timf_default;
-	} else {
-		dprintk( "using updated timf");
-		timf = state->timf;
-	}
-
-	timf = timf * (bw / 50) / 160;
-
-	dib7000m_write_word(state, 23, (u16) ((timf >> 16) & 0xffff));
-	dib7000m_write_word(state, 24, (u16) ((timf      ) & 0xffff));
-
-	return 0;
-}
-
-static int dib7000m_set_diversity_in(struct dvb_frontend *demod, int onoff)
-{
-	struct dib7000m_state *state = demod->demodulator_priv;
-
-	if (state->div_force_off) {
-		dprintk( "diversity combination deactivated - forced by COFDM parameters");
-		onoff = 0;
-	}
-	state->div_state = (u8)onoff;
-
-	if (onoff) {
-		dib7000m_write_word(state, 263 + state->reg_offs, 6);
-		dib7000m_write_word(state, 264 + state->reg_offs, 6);
-		dib7000m_write_word(state, 266 + state->reg_offs, (state->div_sync_wait << 4) | (1 << 2) | (2 << 0));
-	} else {
-		dib7000m_write_word(state, 263 + state->reg_offs, 1);
-		dib7000m_write_word(state, 264 + state->reg_offs, 0);
-		dib7000m_write_word(state, 266 + state->reg_offs, 0);
-	}
-
-	return 0;
-}
-
-static int dib7000m_sad_calib(struct dib7000m_state *state)
-{
-
-/* internal */
-//	dib7000m_write_word(state, 928, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth
-	dib7000m_write_word(state, 929, (0 << 1) | (0 << 0));
-	dib7000m_write_word(state, 930, 776); // 0.625*3.3 / 4096
-
-	/* do the calibration */
-	dib7000m_write_word(state, 929, (1 << 0));
-	dib7000m_write_word(state, 929, (0 << 0));
-
-	msleep(1);
-
-	return 0;
-}
-
-static void dib7000m_reset_pll_common(struct dib7000m_state *state, const struct dibx000_bandwidth_config *bw)
-{
-	dib7000m_write_word(state, 18, (u16) (((bw->internal*1000) >> 16) & 0xffff));
-	dib7000m_write_word(state, 19, (u16) ( (bw->internal*1000)        & 0xffff));
-	dib7000m_write_word(state, 21, (u16) ( (bw->ifreq          >> 16) & 0xffff));
-	dib7000m_write_word(state, 22, (u16) (  bw->ifreq                 & 0xffff));
-
-	dib7000m_write_word(state, 928, bw->sad_cfg);
-}
-
-static void dib7000m_reset_pll(struct dib7000m_state *state)
-{
-	const struct dibx000_bandwidth_config *bw = state->cfg.bw;
-	u16 reg_907,reg_910;
-
-	/* default */
-	reg_907 = (bw->pll_bypass << 15) | (bw->modulo << 7) |
-		(bw->ADClkSrc << 6) | (bw->IO_CLK_en_core << 5) | (bw->bypclk_div << 2) |
-		(bw->enable_refdiv << 1) | (0 << 0);
-	reg_910 = (((bw->pll_ratio >> 6) & 0x3) << 3) | (bw->pll_range << 1) | bw->pll_reset;
-
-	// for this oscillator frequency should be 30 MHz for the Master (default values in the board_parameters give that value)
-	// this is only working only for 30 MHz crystals
-	if (!state->cfg.quartz_direct) {
-		reg_910 |= (1 << 5);  // forcing the predivider to 1
-
-		// if the previous front-end is baseband, its output frequency is 15 MHz (prev freq divided by 2)
-		if(state->cfg.input_clk_is_div_2)
-			reg_907 |= (16 << 9);
-		else // otherwise the previous front-end puts out its input (default 30MHz) - no extra division necessary
-			reg_907 |= (8 << 9);
-	} else {
-		reg_907 |= (bw->pll_ratio & 0x3f) << 9;
-		reg_910 |= (bw->pll_prediv << 5);
-	}
-
-	dib7000m_write_word(state, 910, reg_910); // pll cfg
-	dib7000m_write_word(state, 907, reg_907); // clk cfg0
-	dib7000m_write_word(state, 908, 0x0006);  // clk_cfg1
-
-	dib7000m_reset_pll_common(state, bw);
-}
-
-static void dib7000mc_reset_pll(struct dib7000m_state *state)
-{
-	const struct dibx000_bandwidth_config *bw = state->cfg.bw;
-	u16 clk_cfg1;
-
-	// clk_cfg0
-	dib7000m_write_word(state, 907, (bw->pll_prediv << 8) | (bw->pll_ratio << 0));
-
-	// clk_cfg1
-	//dib7000m_write_word(state, 908, (1 << 14) | (3 << 12) |(0 << 11) |
-	clk_cfg1 = (0 << 14) | (3 << 12) |(0 << 11) |
-			(bw->IO_CLK_en_core << 10) | (bw->bypclk_div << 5) | (bw->enable_refdiv << 4) |
-			(1 << 3) | (bw->pll_range << 1) | (bw->pll_reset << 0);
-	dib7000m_write_word(state, 908, clk_cfg1);
-	clk_cfg1 = (clk_cfg1 & 0xfff7) | (bw->pll_bypass << 3);
-	dib7000m_write_word(state, 908, clk_cfg1);
-
-	// smpl_cfg
-	dib7000m_write_word(state, 910, (1 << 12) | (2 << 10) | (bw->modulo << 8) | (bw->ADClkSrc << 7));
-
-	dib7000m_reset_pll_common(state, bw);
-}
-
-static int dib7000m_reset_gpio(struct dib7000m_state *st)
-{
-	/* reset the GPIOs */
-	dib7000m_write_word(st, 773, st->cfg.gpio_dir);
-	dib7000m_write_word(st, 774, st->cfg.gpio_val);
-
-	/* TODO 782 is P_gpio_od */
-
-	dib7000m_write_word(st, 775, st->cfg.gpio_pwm_pos);
-
-	dib7000m_write_word(st, 780, st->cfg.pwm_freq_div);
-	return 0;
-}
-
-static u16 dib7000m_defaults_common[] =
-
-{
-	// auto search configuration
-	3, 2,
-		0x0004,
-		0x1000,
-		0x0814,
-
-	12, 6,
-		0x001b,
-		0x7740,
-		0x005b,
-		0x8d80,
-		0x01c9,
-		0xc380,
-		0x0000,
-		0x0080,
-		0x0000,
-		0x0090,
-		0x0001,
-		0xd4c0,
-
-	1, 26,
-		0x6680, // P_corm_thres Lock algorithms configuration
-
-	1, 170,
-		0x0410, // P_palf_alpha_regul, P_palf_filter_freeze, P_palf_filter_on
-
-	8, 173,
-		0,
-		0,
-		0,
-		0,
-		0,
-		0,
-		0,
-		0,
-
-	1, 182,
-		8192, // P_fft_nb_to_cut
-
-	2, 195,
-		0x0ccd, // P_pha3_thres
-		0,      // P_cti_use_cpe, P_cti_use_prog
-
-	1, 205,
-		0x200f, // P_cspu_regul, P_cspu_win_cut
-
-	5, 214,
-		0x023d, // P_adp_regul_cnt
-		0x00a4, // P_adp_noise_cnt
-		0x00a4, // P_adp_regul_ext
-		0x7ff0, // P_adp_noise_ext
-		0x3ccc, // P_adp_fil
-
-	1, 226,
-		0, // P_2d_byp_ti_num
-
-	1, 255,
-		0x800, // P_equal_thres_wgn
-
-	1, 263,
-		0x0001,
-
-	1, 281,
-		0x0010, // P_fec_*
-
-	1, 294,
-		0x0062, // P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard
-
-	0
-};
-
-static u16 dib7000m_defaults[] =
-
-{
-	/* set ADC level to -16 */
-	11, 76,
-		(1 << 13) - 825 - 117,
-		(1 << 13) - 837 - 117,
-		(1 << 13) - 811 - 117,
-		(1 << 13) - 766 - 117,
-		(1 << 13) - 737 - 117,
-		(1 << 13) - 693 - 117,
-		(1 << 13) - 648 - 117,
-		(1 << 13) - 619 - 117,
-		(1 << 13) - 575 - 117,
-		(1 << 13) - 531 - 117,
-		(1 << 13) - 501 - 117,
-
-	// Tuner IO bank: max drive (14mA)
-	1, 912,
-		0x2c8a,
-
-	1, 1817,
-		1,
-
-	0,
-};
-
-static int dib7000m_demod_reset(struct dib7000m_state *state)
-{
-	dib7000m_set_power_mode(state, DIB7000M_POWER_ALL);
-
-	/* always leave the VBG voltage on - it consumes almost nothing but takes a long time to start */
-	dib7000m_set_adc_state(state, DIBX000_VBG_ENABLE);
-
-	/* restart all parts */
-	dib7000m_write_word(state,  898, 0xffff);
-	dib7000m_write_word(state,  899, 0xffff);
-	dib7000m_write_word(state,  900, 0xff0f);
-	dib7000m_write_word(state,  901, 0xfffc);
-
-	dib7000m_write_word(state,  898, 0);
-	dib7000m_write_word(state,  899, 0);
-	dib7000m_write_word(state,  900, 0);
-	dib7000m_write_word(state,  901, 0);
-
-	if (state->revision == 0x4000)
-		dib7000m_reset_pll(state);
-	else
-		dib7000mc_reset_pll(state);
-
-	if (dib7000m_reset_gpio(state) != 0)
-		dprintk( "GPIO reset was not successful.");
-
-	if (dib7000m_set_output_mode(state, OUTMODE_HIGH_Z) != 0)
-		dprintk( "OUTPUT_MODE could not be reset.");
-
-	/* unforce divstr regardless whether i2c enumeration was done or not */
-	dib7000m_write_word(state, 1794, dib7000m_read_word(state, 1794) & ~(1 << 1) );
-
-	dib7000m_set_bandwidth(state, 8000);
-
-	dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_ON);
-	dib7000m_sad_calib(state);
-	dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_OFF);
-
-	if (state->cfg.dvbt_mode)
-		dib7000m_write_word(state, 1796, 0x0); // select DVB-T output
-
-	if (state->cfg.mobile_mode)
-		dib7000m_write_word(state, 261 + state->reg_offs, 2);
-	else
-		dib7000m_write_word(state, 224 + state->reg_offs, 1);
-
-	// P_iqc_alpha_pha, P_iqc_alpha_amp, P_iqc_dcc_alpha, ...
-	if(state->cfg.tuner_is_baseband)
-		dib7000m_write_word(state, 36, 0x0755);
-	else
-		dib7000m_write_word(state, 36, 0x1f55);
-
-	// P_divclksel=3 P_divbitsel=1
-	if (state->revision == 0x4000)
-		dib7000m_write_word(state, 909, (3 << 10) | (1 << 6));
-	else
-		dib7000m_write_word(state, 909, (3 << 4) | 1);
-
-	dib7000m_write_tab(state, dib7000m_defaults_common);
-	dib7000m_write_tab(state, dib7000m_defaults);
-
-	dib7000m_set_power_mode(state, DIB7000M_POWER_INTERFACE_ONLY);
-
-	state->internal_clk = state->cfg.bw->internal;
-
-	return 0;
-}
-
-static void dib7000m_restart_agc(struct dib7000m_state *state)
-{
-	// P_restart_iqc & P_restart_agc
-	dib7000m_write_word(state, 898, 0x0c00);
-	dib7000m_write_word(state, 898, 0x0000);
-}
-
-static int dib7000m_agc_soft_split(struct dib7000m_state *state)
-{
-	u16 agc,split_offset;
-
-	if(!state->current_agc || !state->current_agc->perform_agc_softsplit || state->current_agc->split.max == 0)
-		return 0;
-
-	// n_agc_global
-	agc = dib7000m_read_word(state, 390);
-
-	if (agc > state->current_agc->split.min_thres)
-		split_offset = state->current_agc->split.min;
-	else if (agc < state->current_agc->split.max_thres)
-		split_offset = state->current_agc->split.max;
-	else
-		split_offset = state->current_agc->split.max *
-			(agc - state->current_agc->split.min_thres) /
-			(state->current_agc->split.max_thres - state->current_agc->split.min_thres);
-
-	dprintk( "AGC split_offset: %d",split_offset);
-
-	// P_agc_force_split and P_agc_split_offset
-	return dib7000m_write_word(state, 103, (dib7000m_read_word(state, 103) & 0xff00) | split_offset);
-}
-
-static int dib7000m_update_lna(struct dib7000m_state *state)
-{
-	u16 dyn_gain;
-
-	if (state->cfg.update_lna) {
-		// read dyn_gain here (because it is demod-dependent and not fe)
-		dyn_gain = dib7000m_read_word(state, 390);
-
-		if (state->cfg.update_lna(&state->demod,dyn_gain)) { // LNA has changed
-			dib7000m_restart_agc(state);
-			return 1;
-		}
-	}
-	return 0;
-}
-
-static int dib7000m_set_agc_config(struct dib7000m_state *state, u8 band)
-{
-	struct dibx000_agc_config *agc = NULL;
-	int i;
-	if (state->current_band == band && state->current_agc != NULL)
-		return 0;
-	state->current_band = band;
-
-	for (i = 0; i < state->cfg.agc_config_count; i++)
-		if (state->cfg.agc[i].band_caps & band) {
-			agc = &state->cfg.agc[i];
-			break;
-		}
-
-	if (agc == NULL) {
-		dprintk( "no valid AGC configuration found for band 0x%02x",band);
-		return -EINVAL;
-	}
-
-	state->current_agc = agc;
-
-	/* AGC */
-	dib7000m_write_word(state, 72 ,  agc->setup);
-	dib7000m_write_word(state, 73 ,  agc->inv_gain);
-	dib7000m_write_word(state, 74 ,  agc->time_stabiliz);
-	dib7000m_write_word(state, 97 , (agc->alpha_level << 12) | agc->thlock);
-
-	// Demod AGC loop configuration
-	dib7000m_write_word(state, 98, (agc->alpha_mant << 5) | agc->alpha_exp);
-	dib7000m_write_word(state, 99, (agc->beta_mant  << 6) | agc->beta_exp);
-
-	dprintk( "WBD: ref: %d, sel: %d, active: %d, alpha: %d",
-		state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel);
-
-	/* AGC continued */
-	if (state->wbd_ref != 0)
-		dib7000m_write_word(state, 102, state->wbd_ref);
-	else // use default
-		dib7000m_write_word(state, 102, agc->wbd_ref);
-
-	dib7000m_write_word(state, 103, (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8) );
-	dib7000m_write_word(state, 104,  agc->agc1_max);
-	dib7000m_write_word(state, 105,  agc->agc1_min);
-	dib7000m_write_word(state, 106,  agc->agc2_max);
-	dib7000m_write_word(state, 107,  agc->agc2_min);
-	dib7000m_write_word(state, 108, (agc->agc1_pt1 << 8) | agc->agc1_pt2 );
-	dib7000m_write_word(state, 109, (agc->agc1_slope1 << 8) | agc->agc1_slope2);
-	dib7000m_write_word(state, 110, (agc->agc2_pt1 << 8) | agc->agc2_pt2);
-	dib7000m_write_word(state, 111, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
-
-	if (state->revision > 0x4000) { // settings for the MC
-		dib7000m_write_word(state, 71,   agc->agc1_pt3);
-//		dprintk( "929: %x %d %d",
-//			(dib7000m_read_word(state, 929) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2), agc->wbd_inv, agc->wbd_sel);
-		dib7000m_write_word(state, 929, (dib7000m_read_word(state, 929) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2));
-	} else {
-		// wrong default values
-		u16 b[9] = { 676, 696, 717, 737, 758, 778, 799, 819, 840 };
-		for (i = 0; i < 9; i++)
-			dib7000m_write_word(state, 88 + i, b[i]);
-	}
-	return 0;
-}
-
-static void dib7000m_update_timf(struct dib7000m_state *state)
-{
-	u32 timf = (dib7000m_read_word(state, 436) << 16) | dib7000m_read_word(state, 437);
-	state->timf = timf * 160 / (state->current_bandwidth / 50);
-	dib7000m_write_word(state, 23, (u16) (timf >> 16));
-	dib7000m_write_word(state, 24, (u16) (timf & 0xffff));
-	dprintk( "updated timf_frequency: %d (default: %d)",state->timf, state->timf_default);
-}
-
-static int dib7000m_agc_startup(struct dvb_frontend *demod)
-{
-	struct dtv_frontend_properties *ch = &demod->dtv_property_cache;
-	struct dib7000m_state *state = demod->demodulator_priv;
-	u16 cfg_72 = dib7000m_read_word(state, 72);
-	int ret = -1;
-	u8 *agc_state = &state->agc_state;
-	u8 agc_split;
-
-	switch (state->agc_state) {
-		case 0:
-			// set power-up level: interf+analog+AGC
-			dib7000m_set_power_mode(state, DIB7000M_POWER_INTERF_ANALOG_AGC);
-			dib7000m_set_adc_state(state, DIBX000_ADC_ON);
-
-			if (dib7000m_set_agc_config(state, BAND_OF_FREQUENCY(ch->frequency/1000)) != 0)
-				return -1;
-
-			ret = 7; /* ADC power up */
-			(*agc_state)++;
-			break;
-
-		case 1:
-			/* AGC initialization */
-			if (state->cfg.agc_control)
-				state->cfg.agc_control(&state->demod, 1);
-
-			dib7000m_write_word(state, 75, 32768);
-			if (!state->current_agc->perform_agc_softsplit) {
-				/* we are using the wbd - so slow AGC startup */
-				dib7000m_write_word(state, 103, 1 << 8); /* force 0 split on WBD and restart AGC */
-				(*agc_state)++;
-				ret = 5;
-			} else {
-				/* default AGC startup */
-				(*agc_state) = 4;
-				/* wait AGC rough lock time */
-				ret = 7;
-			}
-
-			dib7000m_restart_agc(state);
-			break;
-
-		case 2: /* fast split search path after 5sec */
-			dib7000m_write_word(state,  72, cfg_72 | (1 << 4)); /* freeze AGC loop */
-			dib7000m_write_word(state, 103, 2 << 9);            /* fast split search 0.25kHz */
-			(*agc_state)++;
-			ret = 14;
-			break;
-
-	case 3: /* split search ended */
-			agc_split = (u8)dib7000m_read_word(state, 392); /* store the split value for the next time */
-			dib7000m_write_word(state, 75, dib7000m_read_word(state, 390)); /* set AGC gain start value */
-
-			dib7000m_write_word(state, 72,  cfg_72 & ~(1 << 4));   /* std AGC loop */
-			dib7000m_write_word(state, 103, (state->current_agc->wbd_alpha << 9) | agc_split); /* standard split search */
-
-			dib7000m_restart_agc(state);
-
-			dprintk( "SPLIT %p: %hd", demod, agc_split);
-
-			(*agc_state)++;
-			ret = 5;
-			break;
-
-		case 4: /* LNA startup */
-			/* wait AGC accurate lock time */
-			ret = 7;
-
-			if (dib7000m_update_lna(state))
-				// wait only AGC rough lock time
-				ret = 5;
-			else
-				(*agc_state)++;
-			break;
-
-		case 5:
-			dib7000m_agc_soft_split(state);
-
-			if (state->cfg.agc_control)
-				state->cfg.agc_control(&state->demod, 0);
-
-			(*agc_state)++;
-			break;
-
-		default:
-			break;
-	}
-	return ret;
-}
-
-static void dib7000m_set_channel(struct dib7000m_state *state, struct dtv_frontend_properties *ch,
-				 u8 seq)
-{
-	u16 value, est[4];
-
-	dib7000m_set_bandwidth(state, BANDWIDTH_TO_KHZ(ch->bandwidth_hz));
-
-	/* nfft, guard, qam, alpha */
-	value = 0;
-	switch (ch->transmission_mode) {
-		case TRANSMISSION_MODE_2K: value |= (0 << 7); break;
-		case TRANSMISSION_MODE_4K: value |= (2 << 7); break;
-		default:
-		case TRANSMISSION_MODE_8K: value |= (1 << 7); break;
-	}
-	switch (ch->guard_interval) {
-		case GUARD_INTERVAL_1_32: value |= (0 << 5); break;
-		case GUARD_INTERVAL_1_16: value |= (1 << 5); break;
-		case GUARD_INTERVAL_1_4:  value |= (3 << 5); break;
-		default:
-		case GUARD_INTERVAL_1_8:  value |= (2 << 5); break;
-	}
-	switch (ch->modulation) {
-		case QPSK:  value |= (0 << 3); break;
-		case QAM_16: value |= (1 << 3); break;
-		default:
-		case QAM_64: value |= (2 << 3); break;
-	}
-	switch (HIERARCHY_1) {
-		case HIERARCHY_2: value |= 2; break;
-		case HIERARCHY_4: value |= 4; break;
-		default:
-		case HIERARCHY_1: value |= 1; break;
-	}
-	dib7000m_write_word(state, 0, value);
-	dib7000m_write_word(state, 5, (seq << 4));
-
-	/* P_dintl_native, P_dintlv_inv, P_hrch, P_code_rate, P_select_hp */
-	value = 0;
-	if (1 != 0)
-		value |= (1 << 6);
-	if (ch->hierarchy == 1)
-		value |= (1 << 4);
-	if (1 == 1)
-		value |= 1;
-	switch ((ch->hierarchy == 0 || 1 == 1) ? ch->code_rate_HP : ch->code_rate_LP) {
-		case FEC_2_3: value |= (2 << 1); break;
-		case FEC_3_4: value |= (3 << 1); break;
-		case FEC_5_6: value |= (5 << 1); break;
-		case FEC_7_8: value |= (7 << 1); break;
-		default:
-		case FEC_1_2: value |= (1 << 1); break;
-	}
-	dib7000m_write_word(state, 267 + state->reg_offs, value);
-
-	/* offset loop parameters */
-
-	/* P_timf_alpha = 6, P_corm_alpha=6, P_corm_thres=0x80 */
-	dib7000m_write_word(state, 26, (6 << 12) | (6 << 8) | 0x80);
-
-	/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=1, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
-	dib7000m_write_word(state, 29, (0 << 14) | (4 << 10) | (1 << 9) | (3 << 5) | (1 << 4) | (0x3));
-
-	/* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max=3 */
-	dib7000m_write_word(state, 32, (0 << 4) | 0x3);
-
-	/* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step=5 */
-	dib7000m_write_word(state, 33, (0 << 4) | 0x5);
-
-	/* P_dvsy_sync_wait */
-	switch (ch->transmission_mode) {
-		case TRANSMISSION_MODE_8K: value = 256; break;
-		case TRANSMISSION_MODE_4K: value = 128; break;
-		case TRANSMISSION_MODE_2K:
-		default: value = 64; break;
-	}
-	switch (ch->guard_interval) {
-		case GUARD_INTERVAL_1_16: value *= 2; break;
-		case GUARD_INTERVAL_1_8:  value *= 4; break;
-		case GUARD_INTERVAL_1_4:  value *= 8; break;
-		default:
-		case GUARD_INTERVAL_1_32: value *= 1; break;
-	}
-	state->div_sync_wait = (value * 3) / 2 + 32; // add 50% SFN margin + compensate for one DVSY-fifo TODO
-
-	/* deactive the possibility of diversity reception if extended interleave - not for 7000MC */
-	/* P_dvsy_sync_mode = 0, P_dvsy_sync_enable=1, P_dvcb_comb_mode=2 */
-	if (1 == 1 || state->revision > 0x4000)
-		state->div_force_off = 0;
-	else
-		state->div_force_off = 1;
-	dib7000m_set_diversity_in(&state->demod, state->div_state);
-
-	/* channel estimation fine configuration */
-	switch (ch->modulation) {
-		case QAM_64:
-			est[0] = 0x0148;       /* P_adp_regul_cnt 0.04 */
-			est[1] = 0xfff0;       /* P_adp_noise_cnt -0.002 */
-			est[2] = 0x00a4;       /* P_adp_regul_ext 0.02 */
-			est[3] = 0xfff8;       /* P_adp_noise_ext -0.001 */
-			break;
-		case QAM_16:
-			est[0] = 0x023d;       /* P_adp_regul_cnt 0.07 */
-			est[1] = 0xffdf;       /* P_adp_noise_cnt -0.004 */
-			est[2] = 0x00a4;       /* P_adp_regul_ext 0.02 */
-			est[3] = 0xfff0;       /* P_adp_noise_ext -0.002 */
-			break;
-		default:
-			est[0] = 0x099a;       /* P_adp_regul_cnt 0.3 */
-			est[1] = 0xffae;       /* P_adp_noise_cnt -0.01 */
-			est[2] = 0x0333;       /* P_adp_regul_ext 0.1 */
-			est[3] = 0xfff8;       /* P_adp_noise_ext -0.002 */
-			break;
-	}
-	for (value = 0; value < 4; value++)
-		dib7000m_write_word(state, 214 + value + state->reg_offs, est[value]);
-
-	// set power-up level: autosearch
-	dib7000m_set_power_mode(state, DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD);
-}
-
-static int dib7000m_autosearch_start(struct dvb_frontend *demod)
-{
-	struct dtv_frontend_properties *ch = &demod->dtv_property_cache;
-	struct dib7000m_state *state = demod->demodulator_priv;
-	struct dtv_frontend_properties schan;
-	int ret = 0;
-	u32 value, factor;
-
-	schan = *ch;
-
-	schan.modulation = QAM_64;
-	schan.guard_interval        = GUARD_INTERVAL_1_32;
-	schan.transmission_mode         = TRANSMISSION_MODE_8K;
-	schan.code_rate_HP = FEC_2_3;
-	schan.code_rate_LP = FEC_3_4;
-	schan.hierarchy    = 0;
-
-	dib7000m_set_channel(state, &schan, 7);
-
-	factor = BANDWIDTH_TO_KHZ(schan.bandwidth_hz);
-	if (factor >= 5000)
-		factor = 1;
-	else
-		factor = 6;
-
-	// always use the setting for 8MHz here lock_time for 7,6 MHz are longer
-	value = 30 * state->internal_clk * factor;
-	ret |= dib7000m_write_word(state, 6,  (u16) ((value >> 16) & 0xffff)); // lock0 wait time
-	ret |= dib7000m_write_word(state, 7,  (u16)  (value        & 0xffff)); // lock0 wait time
-	value = 100 * state->internal_clk * factor;
-	ret |= dib7000m_write_word(state, 8,  (u16) ((value >> 16) & 0xffff)); // lock1 wait time
-	ret |= dib7000m_write_word(state, 9,  (u16)  (value        & 0xffff)); // lock1 wait time
-	value = 500 * state->internal_clk * factor;
-	ret |= dib7000m_write_word(state, 10, (u16) ((value >> 16) & 0xffff)); // lock2 wait time
-	ret |= dib7000m_write_word(state, 11, (u16)  (value        & 0xffff)); // lock2 wait time
-
-	// start search
-	value = dib7000m_read_word(state, 0);
-	ret |= dib7000m_write_word(state, 0, (u16) (value | (1 << 9)));
-
-	/* clear n_irq_pending */
-	if (state->revision == 0x4000)
-		dib7000m_write_word(state, 1793, 0);
-	else
-		dib7000m_read_word(state, 537);
-
-	ret |= dib7000m_write_word(state, 0, (u16) value);
-
-	return ret;
-}
-
-static int dib7000m_autosearch_irq(struct dib7000m_state *state, u16 reg)
-{
-	u16 irq_pending = dib7000m_read_word(state, reg);
-
-	if (irq_pending & 0x1) { // failed
-		dprintk( "autosearch failed");
-		return 1;
-	}
-
-	if (irq_pending & 0x2) { // succeeded
-		dprintk( "autosearch succeeded");
-		return 2;
-	}
-	return 0; // still pending
-}
-
-static int dib7000m_autosearch_is_irq(struct dvb_frontend *demod)
-{
-	struct dib7000m_state *state = demod->demodulator_priv;
-	if (state->revision == 0x4000)
-		return dib7000m_autosearch_irq(state, 1793);
-	else
-		return dib7000m_autosearch_irq(state, 537);
-}
-
-static int dib7000m_tune(struct dvb_frontend *demod)
-{
-	struct dtv_frontend_properties *ch = &demod->dtv_property_cache;
-	struct dib7000m_state *state = demod->demodulator_priv;
-	int ret = 0;
-	u16 value;
-
-	// we are already tuned - just resuming from suspend
-	if (ch != NULL)
-		dib7000m_set_channel(state, ch, 0);
-	else
-		return -EINVAL;
-
-	// restart demod
-	ret |= dib7000m_write_word(state, 898, 0x4000);
-	ret |= dib7000m_write_word(state, 898, 0x0000);
-	msleep(45);
-
-	dib7000m_set_power_mode(state, DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD);
-	/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
-	ret |= dib7000m_write_word(state, 29, (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3));
-
-	// never achieved a lock before - wait for timfreq to update
-	if (state->timf == 0)
-		msleep(200);
-
-	//dump_reg(state);
-	/* P_timf_alpha, P_corm_alpha=6, P_corm_thres=0x80 */
-	value = (6 << 8) | 0x80;
-	switch (ch->transmission_mode) {
-		case TRANSMISSION_MODE_2K: value |= (7 << 12); break;
-		case TRANSMISSION_MODE_4K: value |= (8 << 12); break;
-		default:
-		case TRANSMISSION_MODE_8K: value |= (9 << 12); break;
-	}
-	ret |= dib7000m_write_word(state, 26, value);
-
-	/* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max */
-	value = (0 << 4);
-	switch (ch->transmission_mode) {
-		case TRANSMISSION_MODE_2K: value |= 0x6; break;
-		case TRANSMISSION_MODE_4K: value |= 0x7; break;
-		default:
-		case TRANSMISSION_MODE_8K: value |= 0x8; break;
-	}
-	ret |= dib7000m_write_word(state, 32, value);
-
-	/* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step */
-	value = (0 << 4);
-	switch (ch->transmission_mode) {
-		case TRANSMISSION_MODE_2K: value |= 0x6; break;
-		case TRANSMISSION_MODE_4K: value |= 0x7; break;
-		default:
-		case TRANSMISSION_MODE_8K: value |= 0x8; break;
-	}
-	ret |= dib7000m_write_word(state, 33,  value);
-
-	// we achieved a lock - it's time to update the timf freq
-	if ((dib7000m_read_word(state, 535) >> 6)  & 0x1)
-		dib7000m_update_timf(state);
-
-	dib7000m_set_bandwidth(state, BANDWIDTH_TO_KHZ(ch->bandwidth_hz));
-	return ret;
-}
-
-static int dib7000m_wakeup(struct dvb_frontend *demod)
-{
-	struct dib7000m_state *state = demod->demodulator_priv;
-
-	dib7000m_set_power_mode(state, DIB7000M_POWER_ALL);
-
-	if (dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_ON) != 0)
-		dprintk( "could not start Slow ADC");
-
-	return 0;
-}
-
-static int dib7000m_sleep(struct dvb_frontend *demod)
-{
-	struct dib7000m_state *st = demod->demodulator_priv;
-	dib7000m_set_output_mode(st, OUTMODE_HIGH_Z);
-	dib7000m_set_power_mode(st, DIB7000M_POWER_INTERFACE_ONLY);
-	return dib7000m_set_adc_state(st, DIBX000_SLOW_ADC_OFF) |
-		dib7000m_set_adc_state(st, DIBX000_ADC_OFF);
-}
-
-static int dib7000m_identify(struct dib7000m_state *state)
-{
-	u16 value;
-
-	if ((value = dib7000m_read_word(state, 896)) != 0x01b3) {
-		dprintk( "wrong Vendor ID (0x%x)",value);
-		return -EREMOTEIO;
-	}
-
-	state->revision = dib7000m_read_word(state, 897);
-	if (state->revision != 0x4000 &&
-		state->revision != 0x4001 &&
-		state->revision != 0x4002 &&
-		state->revision != 0x4003) {
-		dprintk( "wrong Device ID (0x%x)",value);
-		return -EREMOTEIO;
-	}
-
-	/* protect this driver to be used with 7000PC */
-	if (state->revision == 0x4000 && dib7000m_read_word(state, 769) == 0x4000) {
-		dprintk( "this driver does not work with DiB7000PC");
-		return -EREMOTEIO;
-	}
-
-	switch (state->revision) {
-		case 0x4000: dprintk( "found DiB7000MA/PA/MB/PB"); break;
-		case 0x4001: state->reg_offs = 1; dprintk( "found DiB7000HC"); break;
-		case 0x4002: state->reg_offs = 1; dprintk( "found DiB7000MC"); break;
-		case 0x4003: state->reg_offs = 1; dprintk( "found DiB9000"); break;
-	}
-
-	return 0;
-}
-
-
-static int dib7000m_get_frontend(struct dvb_frontend* fe)
-{
-	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
-	struct dib7000m_state *state = fe->demodulator_priv;
-	u16 tps = dib7000m_read_word(state,480);
-
-	fep->inversion = INVERSION_AUTO;
-
-	fep->bandwidth_hz = BANDWIDTH_TO_HZ(state->current_bandwidth);
-
-	switch ((tps >> 8) & 0x3) {
-		case 0: fep->transmission_mode = TRANSMISSION_MODE_2K; break;
-		case 1: fep->transmission_mode = TRANSMISSION_MODE_8K; break;
-		/* case 2: fep->transmission_mode = TRANSMISSION_MODE_4K; break; */
-	}
-
-	switch (tps & 0x3) {
-		case 0: fep->guard_interval = GUARD_INTERVAL_1_32; break;
-		case 1: fep->guard_interval = GUARD_INTERVAL_1_16; break;
-		case 2: fep->guard_interval = GUARD_INTERVAL_1_8; break;
-		case 3: fep->guard_interval = GUARD_INTERVAL_1_4; break;
-	}
-
-	switch ((tps >> 14) & 0x3) {
-		case 0: fep->modulation = QPSK; break;
-		case 1: fep->modulation = QAM_16; break;
-		case 2:
-		default: fep->modulation = QAM_64; break;
-	}
-
-	/* as long as the frontend_param structure is fixed for hierarchical transmission I refuse to use it */
-	/* (tps >> 13) & 0x1 == hrch is used, (tps >> 10) & 0x7 == alpha */
-
-	fep->hierarchy = HIERARCHY_NONE;
-	switch ((tps >> 5) & 0x7) {
-		case 1: fep->code_rate_HP = FEC_1_2; break;
-		case 2: fep->code_rate_HP = FEC_2_3; break;
-		case 3: fep->code_rate_HP = FEC_3_4; break;
-		case 5: fep->code_rate_HP = FEC_5_6; break;
-		case 7:
-		default: fep->code_rate_HP = FEC_7_8; break;
-
-	}
-
-	switch ((tps >> 2) & 0x7) {
-		case 1: fep->code_rate_LP = FEC_1_2; break;
-		case 2: fep->code_rate_LP = FEC_2_3; break;
-		case 3: fep->code_rate_LP = FEC_3_4; break;
-		case 5: fep->code_rate_LP = FEC_5_6; break;
-		case 7:
-		default: fep->code_rate_LP = FEC_7_8; break;
-	}
-
-	/* native interleaver: (dib7000m_read_word(state, 481) >>  5) & 0x1 */
-
-	return 0;
-}
-
-static int dib7000m_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
-	struct dib7000m_state *state = fe->demodulator_priv;
-	int time, ret;
-
-	dib7000m_set_output_mode(state, OUTMODE_HIGH_Z);
-
-	dib7000m_set_bandwidth(state, BANDWIDTH_TO_KHZ(fep->bandwidth_hz));
-
-	if (fe->ops.tuner_ops.set_params)
-		fe->ops.tuner_ops.set_params(fe);
-
-	/* start up the AGC */
-	state->agc_state = 0;
-	do {
-		time = dib7000m_agc_startup(fe);
-		if (time != -1)
-			msleep(time);
-	} while (time != -1);
-
-	if (fep->transmission_mode == TRANSMISSION_MODE_AUTO ||
-		fep->guard_interval    == GUARD_INTERVAL_AUTO ||
-		fep->modulation        == QAM_AUTO ||
-		fep->code_rate_HP      == FEC_AUTO) {
-		int i = 800, found;
-
-		dib7000m_autosearch_start(fe);
-		do {
-			msleep(1);
-			found = dib7000m_autosearch_is_irq(fe);
-		} while (found == 0 && i--);
-
-		dprintk("autosearch returns: %d",found);
-		if (found == 0 || found == 1)
-			return 0; // no channel found
-
-		dib7000m_get_frontend(fe);
-	}
-
-	ret = dib7000m_tune(fe);
-
-	/* make this a config parameter */
-	dib7000m_set_output_mode(state, OUTMODE_MPEG2_FIFO);
-	return ret;
-}
-
-static int dib7000m_read_status(struct dvb_frontend *fe, fe_status_t *stat)
-{
-	struct dib7000m_state *state = fe->demodulator_priv;
-	u16 lock = dib7000m_read_word(state, 535);
-
-	*stat = 0;
-
-	if (lock & 0x8000)
-		*stat |= FE_HAS_SIGNAL;
-	if (lock & 0x3000)
-		*stat |= FE_HAS_CARRIER;
-	if (lock & 0x0100)
-		*stat |= FE_HAS_VITERBI;
-	if (lock & 0x0010)
-		*stat |= FE_HAS_SYNC;
-	if (lock & 0x0008)
-		*stat |= FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int dib7000m_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct dib7000m_state *state = fe->demodulator_priv;
-	*ber = (dib7000m_read_word(state, 526) << 16) | dib7000m_read_word(state, 527);
-	return 0;
-}
-
-static int dib7000m_read_unc_blocks(struct dvb_frontend *fe, u32 *unc)
-{
-	struct dib7000m_state *state = fe->demodulator_priv;
-	*unc = dib7000m_read_word(state, 534);
-	return 0;
-}
-
-static int dib7000m_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	struct dib7000m_state *state = fe->demodulator_priv;
-	u16 val = dib7000m_read_word(state, 390);
-	*strength = 65535 - val;
-	return 0;
-}
-
-static int dib7000m_read_snr(struct dvb_frontend* fe, u16 *snr)
-{
-	*snr = 0x0000;
-	return 0;
-}
-
-static int dib7000m_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
-{
-	tune->min_delay_ms = 1000;
-	return 0;
-}
-
-static void dib7000m_release(struct dvb_frontend *demod)
-{
-	struct dib7000m_state *st = demod->demodulator_priv;
-	dibx000_exit_i2c_master(&st->i2c_master);
-	kfree(st);
-}
-
-struct i2c_adapter * dib7000m_get_i2c_master(struct dvb_frontend *demod, enum dibx000_i2c_interface intf, int gating)
-{
-	struct dib7000m_state *st = demod->demodulator_priv;
-	return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating);
-}
-EXPORT_SYMBOL(dib7000m_get_i2c_master);
-
-int dib7000m_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff)
-{
-	struct dib7000m_state *state = fe->demodulator_priv;
-	u16 val = dib7000m_read_word(state, 294 + state->reg_offs) & 0xffef;
-	val |= (onoff & 0x1) << 4;
-	dprintk("PID filter enabled %d", onoff);
-	return dib7000m_write_word(state, 294 + state->reg_offs, val);
-}
-EXPORT_SYMBOL(dib7000m_pid_filter_ctrl);
-
-int dib7000m_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff)
-{
-	struct dib7000m_state *state = fe->demodulator_priv;
-	dprintk("PID filter: index %x, PID %d, OnOff %d", id, pid, onoff);
-	return dib7000m_write_word(state, 300 + state->reg_offs + id,
-			onoff ? (1 << 13) | pid : 0);
-}
-EXPORT_SYMBOL(dib7000m_pid_filter);
-
-#if 0
-/* used with some prototype boards */
-int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods,
-		u8 default_addr, struct dib7000m_config cfg[])
-{
-	struct dib7000m_state st = { .i2c_adap = i2c };
-	int k = 0;
-	u8 new_addr = 0;
-
-	for (k = no_of_demods-1; k >= 0; k--) {
-		st.cfg = cfg[k];
-
-		/* designated i2c address */
-		new_addr          = (0x40 + k) << 1;
-		st.i2c_addr = new_addr;
-		if (dib7000m_identify(&st) != 0) {
-			st.i2c_addr = default_addr;
-			if (dib7000m_identify(&st) != 0) {
-				dprintk("DiB7000M #%d: not identified", k);
-				return -EIO;
-			}
-		}
-
-		/* start diversity to pull_down div_str - just for i2c-enumeration */
-		dib7000m_set_output_mode(&st, OUTMODE_DIVERSITY);
-
-		dib7000m_write_word(&st, 1796, 0x0); // select DVB-T output
-
-		/* set new i2c address and force divstart */
-		dib7000m_write_word(&st, 1794, (new_addr << 2) | 0x2);
-
-		dprintk("IC %d initialized (to i2c_address 0x%x)", k, new_addr);
-	}
-
-	for (k = 0; k < no_of_demods; k++) {
-		st.cfg = cfg[k];
-		st.i2c_addr = (0x40 + k) << 1;
-
-		// unforce divstr
-		dib7000m_write_word(&st,1794, st.i2c_addr << 2);
-
-		/* deactivate div - it was just for i2c-enumeration */
-		dib7000m_set_output_mode(&st, OUTMODE_HIGH_Z);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(dib7000m_i2c_enumeration);
-#endif
-
-static struct dvb_frontend_ops dib7000m_ops;
-struct dvb_frontend * dib7000m_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000m_config *cfg)
-{
-	struct dvb_frontend *demod;
-	struct dib7000m_state *st;
-	st = kzalloc(sizeof(struct dib7000m_state), GFP_KERNEL);
-	if (st == NULL)
-		return NULL;
-
-	memcpy(&st->cfg, cfg, sizeof(struct dib7000m_config));
-	st->i2c_adap = i2c_adap;
-	st->i2c_addr = i2c_addr;
-
-	demod                   = &st->demod;
-	demod->demodulator_priv = st;
-	memcpy(&st->demod.ops, &dib7000m_ops, sizeof(struct dvb_frontend_ops));
-	mutex_init(&st->i2c_buffer_lock);
-
-	st->timf_default = cfg->bw->timf;
-
-	if (dib7000m_identify(st) != 0)
-		goto error;
-
-	if (st->revision == 0x4000)
-		dibx000_init_i2c_master(&st->i2c_master, DIB7000, st->i2c_adap, st->i2c_addr);
-	else
-		dibx000_init_i2c_master(&st->i2c_master, DIB7000MC, st->i2c_adap, st->i2c_addr);
-
-	dib7000m_demod_reset(st);
-
-	return demod;
-
-error:
-	kfree(st);
-	return NULL;
-}
-EXPORT_SYMBOL(dib7000m_attach);
-
-static struct dvb_frontend_ops dib7000m_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name = "DiBcom 7000MA/MB/PA/PB/MC",
-		.frequency_min      = 44250000,
-		.frequency_max      = 867250000,
-		.frequency_stepsize = 62500,
-		.caps = FE_CAN_INVERSION_AUTO |
-			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO |
-			FE_CAN_GUARD_INTERVAL_AUTO |
-			FE_CAN_RECOVER |
-			FE_CAN_HIERARCHY_AUTO,
-	},
-
-	.release              = dib7000m_release,
-
-	.init                 = dib7000m_wakeup,
-	.sleep                = dib7000m_sleep,
-
-	.set_frontend         = dib7000m_set_frontend,
-	.get_tune_settings    = dib7000m_fe_get_tune_settings,
-	.get_frontend         = dib7000m_get_frontend,
-
-	.read_status          = dib7000m_read_status,
-	.read_ber             = dib7000m_read_ber,
-	.read_signal_strength = dib7000m_read_signal_strength,
-	.read_snr             = dib7000m_read_snr,
-	.read_ucblocks        = dib7000m_read_unc_blocks,
-};
-
-MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
-MODULE_DESCRIPTION("Driver for the DiBcom 7000MA/MB/PA/PB/MC COFDM demodulator");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/dib7000m.h b/drivers/media/dvb/frontends/dib7000m.h
deleted file mode 100644
index 81fcf22..0000000
--- a/drivers/media/dvb/frontends/dib7000m.h
+++ /dev/null
@@ -1,90 +0,0 @@
-#ifndef DIB7000M_H
-#define DIB7000M_H
-
-#include "dibx000_common.h"
-
-struct dib7000m_config {
-	u8 dvbt_mode;
-	u8 output_mpeg2_in_188_bytes;
-	u8 hostbus_diversity;
-	u8 tuner_is_baseband;
-	u8 mobile_mode;
-	int (*update_lna) (struct dvb_frontend *, u16 agc_global);
-
-	u8 agc_config_count;
-	struct dibx000_agc_config *agc;
-
-	struct dibx000_bandwidth_config *bw;
-
-#define DIB7000M_GPIO_DEFAULT_DIRECTIONS 0xffff
-	u16 gpio_dir;
-#define DIB7000M_GPIO_DEFAULT_VALUES     0x0000
-	u16 gpio_val;
-#define DIB7000M_GPIO_PWM_POS0(v)        ((v & 0xf) << 12)
-#define DIB7000M_GPIO_PWM_POS1(v)        ((v & 0xf) << 8 )
-#define DIB7000M_GPIO_PWM_POS2(v)        ((v & 0xf) << 4 )
-#define DIB7000M_GPIO_PWM_POS3(v)         (v & 0xf)
-#define DIB7000M_GPIO_DEFAULT_PWM_POS    0xffff
-	u16 gpio_pwm_pos;
-
-	u16 pwm_freq_div;
-
-	u8 quartz_direct;
-
-	u8 input_clk_is_div_2;
-
-	int (*agc_control) (struct dvb_frontend *, u8 before);
-};
-
-#define DEFAULT_DIB7000M_I2C_ADDRESS 18
-
-#if defined(CONFIG_DVB_DIB7000M) || (defined(CONFIG_DVB_DIB7000M_MODULE) && \
-				     defined(MODULE))
-extern struct dvb_frontend *dib7000m_attach(struct i2c_adapter *i2c_adap,
-					    u8 i2c_addr,
-					    struct dib7000m_config *cfg);
-extern struct i2c_adapter *dib7000m_get_i2c_master(struct dvb_frontend *,
-						   enum dibx000_i2c_interface,
-						   int);
-extern int dib7000m_pid_filter(struct dvb_frontend *, u8 id, u16 pid, u8 onoff);
-extern int dib7000m_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff);
-#else
-static inline
-struct dvb_frontend *dib7000m_attach(struct i2c_adapter *i2c_adap,
-				     u8 i2c_addr, struct dib7000m_config *cfg)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-static inline
-struct i2c_adapter *dib7000m_get_i2c_master(struct dvb_frontend *demod,
-					    enum dibx000_i2c_interface intf,
-					    int gating)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-static inline int dib7000m_pid_filter(struct dvb_frontend *fe, u8 id,
-						u16 pid, u8 onoff)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib7000m_pid_filter_ctrl(struct dvb_frontend *fe,
-						uint8_t onoff)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-#endif
-
-/* TODO
-extern INT dib7000m_set_gpio(struct dibDemod *demod, UCHAR num, UCHAR dir, UCHAR val);
-extern INT dib7000m_enable_vbg_voltage(struct dibDemod *demod);
-extern void dib7000m_set_hostbus_diversity(struct dibDemod *demod, UCHAR onoff);
-extern USHORT dib7000m_get_current_agc_global(struct dibDemod *demod);
-*/
-
-#endif
diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c
deleted file mode 100644
index 3e1eefa..0000000
--- a/drivers/media/dvb/frontends/dib7000p.c
+++ /dev/null
@@ -1,2457 +0,0 @@
-/*
- * Linux-DVB Driver for DiBcom's second generation DiB7000P (PC).
- *
- * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/)
- *
- * This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- */
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-
-#include "dvb_math.h"
-#include "dvb_frontend.h"
-
-#include "dib7000p.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
-
-static int buggy_sfn_workaround;
-module_param(buggy_sfn_workaround, int, 0644);
-MODULE_PARM_DESC(buggy_sfn_workaround, "Enable work-around for buggy SFNs (default: 0)");
-
-#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000P: "); printk(args); printk("\n"); } } while (0)
-
-struct i2c_device {
-	struct i2c_adapter *i2c_adap;
-	u8 i2c_addr;
-};
-
-struct dib7000p_state {
-	struct dvb_frontend demod;
-	struct dib7000p_config cfg;
-
-	u8 i2c_addr;
-	struct i2c_adapter *i2c_adap;
-
-	struct dibx000_i2c_master i2c_master;
-
-	u16 wbd_ref;
-
-	u8 current_band;
-	u32 current_bandwidth;
-	struct dibx000_agc_config *current_agc;
-	u32 timf;
-
-	u8 div_force_off:1;
-	u8 div_state:1;
-	u16 div_sync_wait;
-
-	u8 agc_state;
-
-	u16 gpio_dir;
-	u16 gpio_val;
-
-	u8 sfn_workaround_active:1;
-
-#define SOC7090 0x7090
-	u16 version;
-
-	u16 tuner_enable;
-	struct i2c_adapter dib7090_tuner_adap;
-
-	/* for the I2C transfer */
-	struct i2c_msg msg[2];
-	u8 i2c_write_buffer[4];
-	u8 i2c_read_buffer[2];
-	struct mutex i2c_buffer_lock;
-
-	u8 input_mode_mpeg;
-};
-
-enum dib7000p_power_mode {
-	DIB7000P_POWER_ALL = 0,
-	DIB7000P_POWER_ANALOG_ADC,
-	DIB7000P_POWER_INTERFACE_ONLY,
-};
-
-/* dib7090 specific fonctions */
-static int dib7090_set_output_mode(struct dvb_frontend *fe, int mode);
-static int dib7090_set_diversity_in(struct dvb_frontend *fe, int onoff);
-static void dib7090_setDibTxMux(struct dib7000p_state *state, int mode);
-static void dib7090_setHostBusMux(struct dib7000p_state *state, int mode);
-
-static u16 dib7000p_read_word(struct dib7000p_state *state, u16 reg)
-{
-	u16 ret;
-
-	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
-		return 0;
-	}
-
-	state->i2c_write_buffer[0] = reg >> 8;
-	state->i2c_write_buffer[1] = reg & 0xff;
-
-	memset(state->msg, 0, 2 * sizeof(struct i2c_msg));
-	state->msg[0].addr = state->i2c_addr >> 1;
-	state->msg[0].flags = 0;
-	state->msg[0].buf = state->i2c_write_buffer;
-	state->msg[0].len = 2;
-	state->msg[1].addr = state->i2c_addr >> 1;
-	state->msg[1].flags = I2C_M_RD;
-	state->msg[1].buf = state->i2c_read_buffer;
-	state->msg[1].len = 2;
-
-	if (i2c_transfer(state->i2c_adap, state->msg, 2) != 2)
-		dprintk("i2c read error on %d", reg);
-
-	ret = (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1];
-	mutex_unlock(&state->i2c_buffer_lock);
-	return ret;
-}
-
-static int dib7000p_write_word(struct dib7000p_state *state, u16 reg, u16 val)
-{
-	int ret;
-
-	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
-		return -EINVAL;
-	}
-
-	state->i2c_write_buffer[0] = (reg >> 8) & 0xff;
-	state->i2c_write_buffer[1] = reg & 0xff;
-	state->i2c_write_buffer[2] = (val >> 8) & 0xff;
-	state->i2c_write_buffer[3] = val & 0xff;
-
-	memset(&state->msg[0], 0, sizeof(struct i2c_msg));
-	state->msg[0].addr = state->i2c_addr >> 1;
-	state->msg[0].flags = 0;
-	state->msg[0].buf = state->i2c_write_buffer;
-	state->msg[0].len = 4;
-
-	ret = (i2c_transfer(state->i2c_adap, state->msg, 1) != 1 ?
-			-EREMOTEIO : 0);
-	mutex_unlock(&state->i2c_buffer_lock);
-	return ret;
-}
-
-static void dib7000p_write_tab(struct dib7000p_state *state, u16 * buf)
-{
-	u16 l = 0, r, *n;
-	n = buf;
-	l = *n++;
-	while (l) {
-		r = *n++;
-
-		do {
-			dib7000p_write_word(state, r, *n++);
-			r++;
-		} while (--l);
-		l = *n++;
-	}
-}
-
-static int dib7000p_set_output_mode(struct dib7000p_state *state, int mode)
-{
-	int ret = 0;
-	u16 outreg, fifo_threshold, smo_mode;
-
-	outreg = 0;
-	fifo_threshold = 1792;
-	smo_mode = (dib7000p_read_word(state, 235) & 0x0050) | (1 << 1);
-
-	dprintk("setting output mode for demod %p to %d", &state->demod, mode);
-
-	switch (mode) {
-	case OUTMODE_MPEG2_PAR_GATED_CLK:
-		outreg = (1 << 10);	/* 0x0400 */
-		break;
-	case OUTMODE_MPEG2_PAR_CONT_CLK:
-		outreg = (1 << 10) | (1 << 6);	/* 0x0440 */
-		break;
-	case OUTMODE_MPEG2_SERIAL:
-		outreg = (1 << 10) | (2 << 6) | (0 << 1);	/* 0x0480 */
-		break;
-	case OUTMODE_DIVERSITY:
-		if (state->cfg.hostbus_diversity)
-			outreg = (1 << 10) | (4 << 6);	/* 0x0500 */
-		else
-			outreg = (1 << 11);
-		break;
-	case OUTMODE_MPEG2_FIFO:
-		smo_mode |= (3 << 1);
-		fifo_threshold = 512;
-		outreg = (1 << 10) | (5 << 6);
-		break;
-	case OUTMODE_ANALOG_ADC:
-		outreg = (1 << 10) | (3 << 6);
-		break;
-	case OUTMODE_HIGH_Z:
-		outreg = 0;
-		break;
-	default:
-		dprintk("Unhandled output_mode passed to be set for demod %p", &state->demod);
-		break;
-	}
-
-	if (state->cfg.output_mpeg2_in_188_bytes)
-		smo_mode |= (1 << 5);
-
-	ret |= dib7000p_write_word(state, 235, smo_mode);
-	ret |= dib7000p_write_word(state, 236, fifo_threshold);	/* synchronous fread */
-	if (state->version != SOC7090)
-		ret |= dib7000p_write_word(state, 1286, outreg);	/* P_Div_active */
-
-	return ret;
-}
-
-static int dib7000p_set_diversity_in(struct dvb_frontend *demod, int onoff)
-{
-	struct dib7000p_state *state = demod->demodulator_priv;
-
-	if (state->div_force_off) {
-		dprintk("diversity combination deactivated - forced by COFDM parameters");
-		onoff = 0;
-		dib7000p_write_word(state, 207, 0);
-	} else
-		dib7000p_write_word(state, 207, (state->div_sync_wait << 4) | (1 << 2) | (2 << 0));
-
-	state->div_state = (u8) onoff;
-
-	if (onoff) {
-		dib7000p_write_word(state, 204, 6);
-		dib7000p_write_word(state, 205, 16);
-		/* P_dvsy_sync_mode = 0, P_dvsy_sync_enable=1, P_dvcb_comb_mode=2 */
-	} else {
-		dib7000p_write_word(state, 204, 1);
-		dib7000p_write_word(state, 205, 0);
-	}
-
-	return 0;
-}
-
-static int dib7000p_set_power_mode(struct dib7000p_state *state, enum dib7000p_power_mode mode)
-{
-	/* by default everything is powered off */
-	u16 reg_774 = 0x3fff, reg_775 = 0xffff, reg_776 = 0x0007, reg_899 = 0x0003, reg_1280 = (0xfe00) | (dib7000p_read_word(state, 1280) & 0x01ff);
-
-	/* now, depending on the requested mode, we power on */
-	switch (mode) {
-		/* power up everything in the demod */
-	case DIB7000P_POWER_ALL:
-		reg_774 = 0x0000;
-		reg_775 = 0x0000;
-		reg_776 = 0x0;
-		reg_899 = 0x0;
-		if (state->version == SOC7090)
-			reg_1280 &= 0x001f;
-		else
-			reg_1280 &= 0x01ff;
-		break;
-
-	case DIB7000P_POWER_ANALOG_ADC:
-		/* dem, cfg, iqc, sad, agc */
-		reg_774 &= ~((1 << 15) | (1 << 14) | (1 << 11) | (1 << 10) | (1 << 9));
-		/* nud */
-		reg_776 &= ~((1 << 0));
-		/* Dout */
-		if (state->version != SOC7090)
-			reg_1280 &= ~((1 << 11));
-		reg_1280 &= ~(1 << 6);
-		/* fall through wanted to enable the interfaces */
-
-		/* just leave power on the control-interfaces: GPIO and (I2C or SDIO) */
-	case DIB7000P_POWER_INTERFACE_ONLY:	/* TODO power up either SDIO or I2C */
-		if (state->version == SOC7090)
-			reg_1280 &= ~((1 << 7) | (1 << 5));
-		else
-			reg_1280 &= ~((1 << 14) | (1 << 13) | (1 << 12) | (1 << 10));
-		break;
-
-/* TODO following stuff is just converted from the dib7000-driver - check when is used what */
-	}
-
-	dib7000p_write_word(state, 774, reg_774);
-	dib7000p_write_word(state, 775, reg_775);
-	dib7000p_write_word(state, 776, reg_776);
-	dib7000p_write_word(state, 1280, reg_1280);
-	if (state->version != SOC7090)
-		dib7000p_write_word(state, 899, reg_899);
-
-	return 0;
-}
-
-static void dib7000p_set_adc_state(struct dib7000p_state *state, enum dibx000_adc_states no)
-{
-	u16 reg_908 = 0, reg_909 = 0;
-	u16 reg;
-
-	if (state->version != SOC7090) {
-		reg_908 = dib7000p_read_word(state, 908);
-		reg_909 = dib7000p_read_word(state, 909);
-	}
-
-	switch (no) {
-	case DIBX000_SLOW_ADC_ON:
-		if (state->version == SOC7090) {
-			reg = dib7000p_read_word(state, 1925);
-
-			dib7000p_write_word(state, 1925, reg | (1 << 4) | (1 << 2));	/* en_slowAdc = 1 & reset_sladc = 1 */
-
-			reg = dib7000p_read_word(state, 1925);	/* read acces to make it works... strange ... */
-			msleep(200);
-			dib7000p_write_word(state, 1925, reg & ~(1 << 4));	/* en_slowAdc = 1 & reset_sladc = 0 */
-
-			reg = dib7000p_read_word(state, 72) & ~((0x3 << 14) | (0x3 << 12));
-			dib7000p_write_word(state, 72, reg | (1 << 14) | (3 << 12) | 524);	/* ref = Vin1 => Vbg ; sel = Vin0 or Vin3 ; (Vin2 = Vcm) */
-		} else {
-			reg_909 |= (1 << 1) | (1 << 0);
-			dib7000p_write_word(state, 909, reg_909);
-			reg_909 &= ~(1 << 1);
-		}
-		break;
-
-	case DIBX000_SLOW_ADC_OFF:
-		if (state->version == SOC7090) {
-			reg = dib7000p_read_word(state, 1925);
-			dib7000p_write_word(state, 1925, (reg & ~(1 << 2)) | (1 << 4));	/* reset_sladc = 1 en_slowAdc = 0 */
-		} else
-			reg_909 |= (1 << 1) | (1 << 0);
-		break;
-
-	case DIBX000_ADC_ON:
-		reg_908 &= 0x0fff;
-		reg_909 &= 0x0003;
-		break;
-
-	case DIBX000_ADC_OFF:
-		reg_908 |= (1 << 14) | (1 << 13) | (1 << 12);
-		reg_909 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2);
-		break;
-
-	case DIBX000_VBG_ENABLE:
-		reg_908 &= ~(1 << 15);
-		break;
-
-	case DIBX000_VBG_DISABLE:
-		reg_908 |= (1 << 15);
-		break;
-
-	default:
-		break;
-	}
-
-//	dprintk( "908: %x, 909: %x\n", reg_908, reg_909);
-
-	reg_909 |= (state->cfg.disable_sample_and_hold & 1) << 4;
-	reg_908 |= (state->cfg.enable_current_mirror & 1) << 7;
-
-	if (state->version != SOC7090) {
-		dib7000p_write_word(state, 908, reg_908);
-		dib7000p_write_word(state, 909, reg_909);
-	}
-}
-
-static int dib7000p_set_bandwidth(struct dib7000p_state *state, u32 bw)
-{
-	u32 timf;
-
-	// store the current bandwidth for later use
-	state->current_bandwidth = bw;
-
-	if (state->timf == 0) {
-		dprintk("using default timf");
-		timf = state->cfg.bw->timf;
-	} else {
-		dprintk("using updated timf");
-		timf = state->timf;
-	}
-
-	timf = timf * (bw / 50) / 160;
-
-	dib7000p_write_word(state, 23, (u16) ((timf >> 16) & 0xffff));
-	dib7000p_write_word(state, 24, (u16) ((timf) & 0xffff));
-
-	return 0;
-}
-
-static int dib7000p_sad_calib(struct dib7000p_state *state)
-{
-/* internal */
-	dib7000p_write_word(state, 73, (0 << 1) | (0 << 0));
-
-	if (state->version == SOC7090)
-		dib7000p_write_word(state, 74, 2048);
-	else
-		dib7000p_write_word(state, 74, 776);
-
-	/* do the calibration */
-	dib7000p_write_word(state, 73, (1 << 0));
-	dib7000p_write_word(state, 73, (0 << 0));
-
-	msleep(1);
-
-	return 0;
-}
-
-int dib7000p_set_wbd_ref(struct dvb_frontend *demod, u16 value)
-{
-	struct dib7000p_state *state = demod->demodulator_priv;
-	if (value > 4095)
-		value = 4095;
-	state->wbd_ref = value;
-	return dib7000p_write_word(state, 105, (dib7000p_read_word(state, 105) & 0xf000) | value);
-}
-EXPORT_SYMBOL(dib7000p_set_wbd_ref);
-
-int dib7000p_get_agc_values(struct dvb_frontend *fe,
-		u16 *agc_global, u16 *agc1, u16 *agc2, u16 *wbd)
-{
-	struct dib7000p_state *state = fe->demodulator_priv;
-
-	if (agc_global != NULL)
-		*agc_global = dib7000p_read_word(state, 394);
-	if (agc1 != NULL)
-		*agc1 = dib7000p_read_word(state, 392);
-	if (agc2 != NULL)
-		*agc2 = dib7000p_read_word(state, 393);
-	if (wbd != NULL)
-		*wbd = dib7000p_read_word(state, 397);
-
-	return 0;
-}
-EXPORT_SYMBOL(dib7000p_get_agc_values);
-
-static void dib7000p_reset_pll(struct dib7000p_state *state)
-{
-	struct dibx000_bandwidth_config *bw = &state->cfg.bw[0];
-	u16 clk_cfg0;
-
-	if (state->version == SOC7090) {
-		dib7000p_write_word(state, 1856, (!bw->pll_reset << 13) | (bw->pll_range << 12) | (bw->pll_ratio << 6) | (bw->pll_prediv));
-
-		while (((dib7000p_read_word(state, 1856) >> 15) & 0x1) != 1)
-			;
-
-		dib7000p_write_word(state, 1857, dib7000p_read_word(state, 1857) | (!bw->pll_bypass << 15));
-	} else {
-		/* force PLL bypass */
-		clk_cfg0 = (1 << 15) | ((bw->pll_ratio & 0x3f) << 9) |
-			(bw->modulo << 7) | (bw->ADClkSrc << 6) | (bw->IO_CLK_en_core << 5) | (bw->bypclk_div << 2) | (bw->enable_refdiv << 1) | (0 << 0);
-
-		dib7000p_write_word(state, 900, clk_cfg0);
-
-		/* P_pll_cfg */
-		dib7000p_write_word(state, 903, (bw->pll_prediv << 5) | (((bw->pll_ratio >> 6) & 0x3) << 3) | (bw->pll_range << 1) | bw->pll_reset);
-		clk_cfg0 = (bw->pll_bypass << 15) | (clk_cfg0 & 0x7fff);
-		dib7000p_write_word(state, 900, clk_cfg0);
-	}
-
-	dib7000p_write_word(state, 18, (u16) (((bw->internal * 1000) >> 16) & 0xffff));
-	dib7000p_write_word(state, 19, (u16) ((bw->internal * 1000) & 0xffff));
-	dib7000p_write_word(state, 21, (u16) ((bw->ifreq >> 16) & 0xffff));
-	dib7000p_write_word(state, 22, (u16) ((bw->ifreq) & 0xffff));
-
-	dib7000p_write_word(state, 72, bw->sad_cfg);
-}
-
-static u32 dib7000p_get_internal_freq(struct dib7000p_state *state)
-{
-	u32 internal = (u32) dib7000p_read_word(state, 18) << 16;
-	internal |= (u32) dib7000p_read_word(state, 19);
-	internal /= 1000;
-
-	return internal;
-}
-
-int dib7000p_update_pll(struct dvb_frontend *fe, struct dibx000_bandwidth_config *bw)
-{
-	struct dib7000p_state *state = fe->demodulator_priv;
-	u16 reg_1857, reg_1856 = dib7000p_read_word(state, 1856);
-	u8 loopdiv, prediv;
-	u32 internal, xtal;
-
-	/* get back old values */
-	prediv = reg_1856 & 0x3f;
-	loopdiv = (reg_1856 >> 6) & 0x3f;
-
-	if ((bw != NULL) && (bw->pll_prediv != prediv || bw->pll_ratio != loopdiv)) {
-		dprintk("Updating pll (prediv: old =  %d new = %d ; loopdiv : old = %d new = %d)", prediv, bw->pll_prediv, loopdiv, bw->pll_ratio);
-		reg_1856 &= 0xf000;
-		reg_1857 = dib7000p_read_word(state, 1857);
-		dib7000p_write_word(state, 1857, reg_1857 & ~(1 << 15));
-
-		dib7000p_write_word(state, 1856, reg_1856 | ((bw->pll_ratio & 0x3f) << 6) | (bw->pll_prediv & 0x3f));
-
-		/* write new system clk into P_sec_len */
-		internal = dib7000p_get_internal_freq(state);
-		xtal = (internal / loopdiv) * prediv;
-		internal = 1000 * (xtal / bw->pll_prediv) * bw->pll_ratio;	/* new internal */
-		dib7000p_write_word(state, 18, (u16) ((internal >> 16) & 0xffff));
-		dib7000p_write_word(state, 19, (u16) (internal & 0xffff));
-
-		dib7000p_write_word(state, 1857, reg_1857 | (1 << 15));
-
-		while (((dib7000p_read_word(state, 1856) >> 15) & 0x1) != 1)
-			dprintk("Waiting for PLL to lock");
-
-		return 0;
-	}
-	return -EIO;
-}
-EXPORT_SYMBOL(dib7000p_update_pll);
-
-static int dib7000p_reset_gpio(struct dib7000p_state *st)
-{
-	/* reset the GPIOs */
-	dprintk("gpio dir: %x: val: %x, pwm_pos: %x", st->gpio_dir, st->gpio_val, st->cfg.gpio_pwm_pos);
-
-	dib7000p_write_word(st, 1029, st->gpio_dir);
-	dib7000p_write_word(st, 1030, st->gpio_val);
-
-	/* TODO 1031 is P_gpio_od */
-
-	dib7000p_write_word(st, 1032, st->cfg.gpio_pwm_pos);
-
-	dib7000p_write_word(st, 1037, st->cfg.pwm_freq_div);
-	return 0;
-}
-
-static int dib7000p_cfg_gpio(struct dib7000p_state *st, u8 num, u8 dir, u8 val)
-{
-	st->gpio_dir = dib7000p_read_word(st, 1029);
-	st->gpio_dir &= ~(1 << num);	/* reset the direction bit */
-	st->gpio_dir |= (dir & 0x1) << num;	/* set the new direction */
-	dib7000p_write_word(st, 1029, st->gpio_dir);
-
-	st->gpio_val = dib7000p_read_word(st, 1030);
-	st->gpio_val &= ~(1 << num);	/* reset the direction bit */
-	st->gpio_val |= (val & 0x01) << num;	/* set the new value */
-	dib7000p_write_word(st, 1030, st->gpio_val);
-
-	return 0;
-}
-
-int dib7000p_set_gpio(struct dvb_frontend *demod, u8 num, u8 dir, u8 val)
-{
-	struct dib7000p_state *state = demod->demodulator_priv;
-	return dib7000p_cfg_gpio(state, num, dir, val);
-}
-EXPORT_SYMBOL(dib7000p_set_gpio);
-
-static u16 dib7000p_defaults[] = {
-	// auto search configuration
-	3, 2,
-	0x0004,
-	(1<<3)|(1<<11)|(1<<12)|(1<<13),
-	0x0814,			/* Equal Lock */
-
-	12, 6,
-	0x001b,
-	0x7740,
-	0x005b,
-	0x8d80,
-	0x01c9,
-	0xc380,
-	0x0000,
-	0x0080,
-	0x0000,
-	0x0090,
-	0x0001,
-	0xd4c0,
-
-	1, 26,
-	0x6680,
-
-	/* set ADC level to -16 */
-	11, 79,
-	(1 << 13) - 825 - 117,
-	(1 << 13) - 837 - 117,
-	(1 << 13) - 811 - 117,
-	(1 << 13) - 766 - 117,
-	(1 << 13) - 737 - 117,
-	(1 << 13) - 693 - 117,
-	(1 << 13) - 648 - 117,
-	(1 << 13) - 619 - 117,
-	(1 << 13) - 575 - 117,
-	(1 << 13) - 531 - 117,
-	(1 << 13) - 501 - 117,
-
-	1, 142,
-	0x0410,
-
-	/* disable power smoothing */
-	8, 145,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-
-	1, 154,
-	1 << 13,
-
-	1, 168,
-	0x0ccd,
-
-	1, 183,
-	0x200f,
-
-	1, 212,
-		0x169,
-
-	5, 187,
-	0x023d,
-	0x00a4,
-	0x00a4,
-	0x7ff0,
-	0x3ccc,
-
-	1, 198,
-	0x800,
-
-	1, 222,
-	0x0010,
-
-	1, 235,
-	0x0062,
-
-	0,
-};
-
-static int dib7000p_demod_reset(struct dib7000p_state *state)
-{
-	dib7000p_set_power_mode(state, DIB7000P_POWER_ALL);
-
-	if (state->version == SOC7090)
-		dibx000_reset_i2c_master(&state->i2c_master);
-
-	dib7000p_set_adc_state(state, DIBX000_VBG_ENABLE);
-
-	/* restart all parts */
-	dib7000p_write_word(state, 770, 0xffff);
-	dib7000p_write_word(state, 771, 0xffff);
-	dib7000p_write_word(state, 772, 0x001f);
-	dib7000p_write_word(state, 1280, 0x001f - ((1 << 4) | (1 << 3)));
-
-	dib7000p_write_word(state, 770, 0);
-	dib7000p_write_word(state, 771, 0);
-	dib7000p_write_word(state, 772, 0);
-	dib7000p_write_word(state, 1280, 0);
-
-	if (state->version != SOC7090) {
-		dib7000p_write_word(state,  898, 0x0003);
-		dib7000p_write_word(state,  898, 0);
-	}
-
-	/* default */
-	dib7000p_reset_pll(state);
-
-	if (dib7000p_reset_gpio(state) != 0)
-		dprintk("GPIO reset was not successful.");
-
-	if (state->version == SOC7090) {
-		dib7000p_write_word(state, 899, 0);
-
-		/* impulse noise */
-		dib7000p_write_word(state, 42, (1<<5) | 3); /* P_iqc_thsat_ipc = 1 ; P_iqc_win2 = 3 */
-		dib7000p_write_word(state, 43, 0x2d4); /*-300 fag P_iqc_dect_min = -280 */
-		dib7000p_write_word(state, 44, 300); /* 300 fag P_iqc_dect_min = +280 */
-		dib7000p_write_word(state, 273, (0<<6) | 30);
-	}
-	if (dib7000p_set_output_mode(state, OUTMODE_HIGH_Z) != 0)
-		dprintk("OUTPUT_MODE could not be reset.");
-
-	dib7000p_set_adc_state(state, DIBX000_SLOW_ADC_ON);
-	dib7000p_sad_calib(state);
-	dib7000p_set_adc_state(state, DIBX000_SLOW_ADC_OFF);
-
-	/* unforce divstr regardless whether i2c enumeration was done or not */
-	dib7000p_write_word(state, 1285, dib7000p_read_word(state, 1285) & ~(1 << 1));
-
-	dib7000p_set_bandwidth(state, 8000);
-
-	if (state->version == SOC7090) {
-		dib7000p_write_word(state, 36, 0x0755);/* P_iqc_impnc_on =1 & P_iqc_corr_inh = 1 for impulsive noise */
-	} else {
-		if (state->cfg.tuner_is_baseband)
-			dib7000p_write_word(state, 36, 0x0755);
-		else
-			dib7000p_write_word(state, 36, 0x1f55);
-	}
-
-	dib7000p_write_tab(state, dib7000p_defaults);
-	if (state->version != SOC7090) {
-		dib7000p_write_word(state, 901, 0x0006);
-		dib7000p_write_word(state, 902, (3 << 10) | (1 << 6));
-		dib7000p_write_word(state, 905, 0x2c8e);
-	}
-
-	dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY);
-
-	return 0;
-}
-
-static void dib7000p_pll_clk_cfg(struct dib7000p_state *state)
-{
-	u16 tmp = 0;
-	tmp = dib7000p_read_word(state, 903);
-	dib7000p_write_word(state, 903, (tmp | 0x1));
-	tmp = dib7000p_read_word(state, 900);
-	dib7000p_write_word(state, 900, (tmp & 0x7fff) | (1 << 6));
-}
-
-static void dib7000p_restart_agc(struct dib7000p_state *state)
-{
-	// P_restart_iqc & P_restart_agc
-	dib7000p_write_word(state, 770, (1 << 11) | (1 << 9));
-	dib7000p_write_word(state, 770, 0x0000);
-}
-
-static int dib7000p_update_lna(struct dib7000p_state *state)
-{
-	u16 dyn_gain;
-
-	if (state->cfg.update_lna) {
-		dyn_gain = dib7000p_read_word(state, 394);
-		if (state->cfg.update_lna(&state->demod, dyn_gain)) {
-			dib7000p_restart_agc(state);
-			return 1;
-		}
-	}
-
-	return 0;
-}
-
-static int dib7000p_set_agc_config(struct dib7000p_state *state, u8 band)
-{
-	struct dibx000_agc_config *agc = NULL;
-	int i;
-	if (state->current_band == band && state->current_agc != NULL)
-		return 0;
-	state->current_band = band;
-
-	for (i = 0; i < state->cfg.agc_config_count; i++)
-		if (state->cfg.agc[i].band_caps & band) {
-			agc = &state->cfg.agc[i];
-			break;
-		}
-
-	if (agc == NULL) {
-		dprintk("no valid AGC configuration found for band 0x%02x", band);
-		return -EINVAL;
-	}
-
-	state->current_agc = agc;
-
-	/* AGC */
-	dib7000p_write_word(state, 75, agc->setup);
-	dib7000p_write_word(state, 76, agc->inv_gain);
-	dib7000p_write_word(state, 77, agc->time_stabiliz);
-	dib7000p_write_word(state, 100, (agc->alpha_level << 12) | agc->thlock);
-
-	// Demod AGC loop configuration
-	dib7000p_write_word(state, 101, (agc->alpha_mant << 5) | agc->alpha_exp);
-	dib7000p_write_word(state, 102, (agc->beta_mant << 6) | agc->beta_exp);
-
-	/* AGC continued */
-	dprintk("WBD: ref: %d, sel: %d, active: %d, alpha: %d",
-		state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel);
-
-	if (state->wbd_ref != 0)
-		dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | state->wbd_ref);
-	else
-		dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | agc->wbd_ref);
-
-	dib7000p_write_word(state, 106, (agc->wbd_sel << 13) | (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8));
-
-	dib7000p_write_word(state, 107, agc->agc1_max);
-	dib7000p_write_word(state, 108, agc->agc1_min);
-	dib7000p_write_word(state, 109, agc->agc2_max);
-	dib7000p_write_word(state, 110, agc->agc2_min);
-	dib7000p_write_word(state, 111, (agc->agc1_pt1 << 8) | agc->agc1_pt2);
-	dib7000p_write_word(state, 112, agc->agc1_pt3);
-	dib7000p_write_word(state, 113, (agc->agc1_slope1 << 8) | agc->agc1_slope2);
-	dib7000p_write_word(state, 114, (agc->agc2_pt1 << 8) | agc->agc2_pt2);
-	dib7000p_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
-	return 0;
-}
-
-static void dib7000p_set_dds(struct dib7000p_state *state, s32 offset_khz)
-{
-	u32 internal = dib7000p_get_internal_freq(state);
-	s32 unit_khz_dds_val = 67108864 / (internal);	/* 2**26 / Fsampling is the unit 1KHz offset */
-	u32 abs_offset_khz = ABS(offset_khz);
-	u32 dds = state->cfg.bw->ifreq & 0x1ffffff;
-	u8 invert = !!(state->cfg.bw->ifreq & (1 << 25));
-
-	dprintk("setting a frequency offset of %dkHz internal freq = %d invert = %d", offset_khz, internal, invert);
-
-	if (offset_khz < 0)
-		unit_khz_dds_val *= -1;
-
-	/* IF tuner */
-	if (invert)
-		dds -= (abs_offset_khz * unit_khz_dds_val);	/* /100 because of /100 on the unit_khz_dds_val line calc for better accuracy */
-	else
-		dds += (abs_offset_khz * unit_khz_dds_val);
-
-	if (abs_offset_khz <= (internal / 2)) {	/* Max dds offset is the half of the demod freq */
-		dib7000p_write_word(state, 21, (u16) (((dds >> 16) & 0x1ff) | (0 << 10) | (invert << 9)));
-		dib7000p_write_word(state, 22, (u16) (dds & 0xffff));
-	}
-}
-
-static int dib7000p_agc_startup(struct dvb_frontend *demod)
-{
-	struct dtv_frontend_properties *ch = &demod->dtv_property_cache;
-	struct dib7000p_state *state = demod->demodulator_priv;
-	int ret = -1;
-	u8 *agc_state = &state->agc_state;
-	u8 agc_split;
-	u16 reg;
-	u32 upd_demod_gain_period = 0x1000;
-
-	switch (state->agc_state) {
-	case 0:
-		dib7000p_set_power_mode(state, DIB7000P_POWER_ALL);
-		if (state->version == SOC7090) {
-			reg = dib7000p_read_word(state, 0x79b) & 0xff00;
-			dib7000p_write_word(state, 0x79a, upd_demod_gain_period & 0xFFFF);	/* lsb */
-			dib7000p_write_word(state, 0x79b, reg | (1 << 14) | ((upd_demod_gain_period >> 16) & 0xFF));
-
-			/* enable adc i & q */
-			reg = dib7000p_read_word(state, 0x780);
-			dib7000p_write_word(state, 0x780, (reg | (0x3)) & (~(1 << 7)));
-		} else {
-			dib7000p_set_adc_state(state, DIBX000_ADC_ON);
-			dib7000p_pll_clk_cfg(state);
-		}
-
-		if (dib7000p_set_agc_config(state, BAND_OF_FREQUENCY(ch->frequency / 1000)) != 0)
-			return -1;
-
-		dib7000p_set_dds(state, 0);
-		ret = 7;
-		(*agc_state)++;
-		break;
-
-	case 1:
-		if (state->cfg.agc_control)
-			state->cfg.agc_control(&state->demod, 1);
-
-		dib7000p_write_word(state, 78, 32768);
-		if (!state->current_agc->perform_agc_softsplit) {
-			/* we are using the wbd - so slow AGC startup */
-			/* force 0 split on WBD and restart AGC */
-			dib7000p_write_word(state, 106, (state->current_agc->wbd_sel << 13) | (state->current_agc->wbd_alpha << 9) | (1 << 8));
-			(*agc_state)++;
-			ret = 5;
-		} else {
-			/* default AGC startup */
-			(*agc_state) = 4;
-			/* wait AGC rough lock time */
-			ret = 7;
-		}
-
-		dib7000p_restart_agc(state);
-		break;
-
-	case 2:		/* fast split search path after 5sec */
-		dib7000p_write_word(state, 75, state->current_agc->setup | (1 << 4));	/* freeze AGC loop */
-		dib7000p_write_word(state, 106, (state->current_agc->wbd_sel << 13) | (2 << 9) | (0 << 8));	/* fast split search 0.25kHz */
-		(*agc_state)++;
-		ret = 14;
-		break;
-
-	case 3:		/* split search ended */
-		agc_split = (u8) dib7000p_read_word(state, 396);	/* store the split value for the next time */
-		dib7000p_write_word(state, 78, dib7000p_read_word(state, 394));	/* set AGC gain start value */
-
-		dib7000p_write_word(state, 75, state->current_agc->setup);	/* std AGC loop */
-		dib7000p_write_word(state, 106, (state->current_agc->wbd_sel << 13) | (state->current_agc->wbd_alpha << 9) | agc_split);	/* standard split search */
-
-		dib7000p_restart_agc(state);
-
-		dprintk("SPLIT %p: %hd", demod, agc_split);
-
-		(*agc_state)++;
-		ret = 5;
-		break;
-
-	case 4:		/* LNA startup */
-		ret = 7;
-
-		if (dib7000p_update_lna(state))
-			ret = 5;
-		else
-			(*agc_state)++;
-		break;
-
-	case 5:
-		if (state->cfg.agc_control)
-			state->cfg.agc_control(&state->demod, 0);
-		(*agc_state)++;
-		break;
-	default:
-		break;
-	}
-	return ret;
-}
-
-static void dib7000p_update_timf(struct dib7000p_state *state)
-{
-	u32 timf = (dib7000p_read_word(state, 427) << 16) | dib7000p_read_word(state, 428);
-	state->timf = timf * 160 / (state->current_bandwidth / 50);
-	dib7000p_write_word(state, 23, (u16) (timf >> 16));
-	dib7000p_write_word(state, 24, (u16) (timf & 0xffff));
-	dprintk("updated timf_frequency: %d (default: %d)", state->timf, state->cfg.bw->timf);
-
-}
-
-u32 dib7000p_ctrl_timf(struct dvb_frontend *fe, u8 op, u32 timf)
-{
-	struct dib7000p_state *state = fe->demodulator_priv;
-	switch (op) {
-	case DEMOD_TIMF_SET:
-		state->timf = timf;
-		break;
-	case DEMOD_TIMF_UPDATE:
-		dib7000p_update_timf(state);
-		break;
-	case DEMOD_TIMF_GET:
-		break;
-	}
-	dib7000p_set_bandwidth(state, state->current_bandwidth);
-	return state->timf;
-}
-EXPORT_SYMBOL(dib7000p_ctrl_timf);
-
-static void dib7000p_set_channel(struct dib7000p_state *state,
-				 struct dtv_frontend_properties *ch, u8 seq)
-{
-	u16 value, est[4];
-
-	dib7000p_set_bandwidth(state, BANDWIDTH_TO_KHZ(ch->bandwidth_hz));
-
-	/* nfft, guard, qam, alpha */
-	value = 0;
-	switch (ch->transmission_mode) {
-	case TRANSMISSION_MODE_2K:
-		value |= (0 << 7);
-		break;
-	case TRANSMISSION_MODE_4K:
-		value |= (2 << 7);
-		break;
-	default:
-	case TRANSMISSION_MODE_8K:
-		value |= (1 << 7);
-		break;
-	}
-	switch (ch->guard_interval) {
-	case GUARD_INTERVAL_1_32:
-		value |= (0 << 5);
-		break;
-	case GUARD_INTERVAL_1_16:
-		value |= (1 << 5);
-		break;
-	case GUARD_INTERVAL_1_4:
-		value |= (3 << 5);
-		break;
-	default:
-	case GUARD_INTERVAL_1_8:
-		value |= (2 << 5);
-		break;
-	}
-	switch (ch->modulation) {
-	case QPSK:
-		value |= (0 << 3);
-		break;
-	case QAM_16:
-		value |= (1 << 3);
-		break;
-	default:
-	case QAM_64:
-		value |= (2 << 3);
-		break;
-	}
-	switch (HIERARCHY_1) {
-	case HIERARCHY_2:
-		value |= 2;
-		break;
-	case HIERARCHY_4:
-		value |= 4;
-		break;
-	default:
-	case HIERARCHY_1:
-		value |= 1;
-		break;
-	}
-	dib7000p_write_word(state, 0, value);
-	dib7000p_write_word(state, 5, (seq << 4) | 1);	/* do not force tps, search list 0 */
-
-	/* P_dintl_native, P_dintlv_inv, P_hrch, P_code_rate, P_select_hp */
-	value = 0;
-	if (1 != 0)
-		value |= (1 << 6);
-	if (ch->hierarchy == 1)
-		value |= (1 << 4);
-	if (1 == 1)
-		value |= 1;
-	switch ((ch->hierarchy == 0 || 1 == 1) ? ch->code_rate_HP : ch->code_rate_LP) {
-	case FEC_2_3:
-		value |= (2 << 1);
-		break;
-	case FEC_3_4:
-		value |= (3 << 1);
-		break;
-	case FEC_5_6:
-		value |= (5 << 1);
-		break;
-	case FEC_7_8:
-		value |= (7 << 1);
-		break;
-	default:
-	case FEC_1_2:
-		value |= (1 << 1);
-		break;
-	}
-	dib7000p_write_word(state, 208, value);
-
-	/* offset loop parameters */
-	dib7000p_write_word(state, 26, 0x6680);
-	dib7000p_write_word(state, 32, 0x0003);
-	dib7000p_write_word(state, 29, 0x1273);
-	dib7000p_write_word(state, 33, 0x0005);
-
-	/* P_dvsy_sync_wait */
-	switch (ch->transmission_mode) {
-	case TRANSMISSION_MODE_8K:
-		value = 256;
-		break;
-	case TRANSMISSION_MODE_4K:
-		value = 128;
-		break;
-	case TRANSMISSION_MODE_2K:
-	default:
-		value = 64;
-		break;
-	}
-	switch (ch->guard_interval) {
-	case GUARD_INTERVAL_1_16:
-		value *= 2;
-		break;
-	case GUARD_INTERVAL_1_8:
-		value *= 4;
-		break;
-	case GUARD_INTERVAL_1_4:
-		value *= 8;
-		break;
-	default:
-	case GUARD_INTERVAL_1_32:
-		value *= 1;
-		break;
-	}
-	if (state->cfg.diversity_delay == 0)
-		state->div_sync_wait = (value * 3) / 2 + 48;
-	else
-		state->div_sync_wait = (value * 3) / 2 + state->cfg.diversity_delay;
-
-	/* deactive the possibility of diversity reception if extended interleaver */
-	state->div_force_off = !1 && ch->transmission_mode != TRANSMISSION_MODE_8K;
-	dib7000p_set_diversity_in(&state->demod, state->div_state);
-
-	/* channel estimation fine configuration */
-	switch (ch->modulation) {
-	case QAM_64:
-		est[0] = 0x0148;	/* P_adp_regul_cnt 0.04 */
-		est[1] = 0xfff0;	/* P_adp_noise_cnt -0.002 */
-		est[2] = 0x00a4;	/* P_adp_regul_ext 0.02 */
-		est[3] = 0xfff8;	/* P_adp_noise_ext -0.001 */
-		break;
-	case QAM_16:
-		est[0] = 0x023d;	/* P_adp_regul_cnt 0.07 */
-		est[1] = 0xffdf;	/* P_adp_noise_cnt -0.004 */
-		est[2] = 0x00a4;	/* P_adp_regul_ext 0.02 */
-		est[3] = 0xfff0;	/* P_adp_noise_ext -0.002 */
-		break;
-	default:
-		est[0] = 0x099a;	/* P_adp_regul_cnt 0.3 */
-		est[1] = 0xffae;	/* P_adp_noise_cnt -0.01 */
-		est[2] = 0x0333;	/* P_adp_regul_ext 0.1 */
-		est[3] = 0xfff8;	/* P_adp_noise_ext -0.002 */
-		break;
-	}
-	for (value = 0; value < 4; value++)
-		dib7000p_write_word(state, 187 + value, est[value]);
-}
-
-static int dib7000p_autosearch_start(struct dvb_frontend *demod)
-{
-	struct dtv_frontend_properties *ch = &demod->dtv_property_cache;
-	struct dib7000p_state *state = demod->demodulator_priv;
-	struct dtv_frontend_properties schan;
-	u32 value, factor;
-	u32 internal = dib7000p_get_internal_freq(state);
-
-	schan = *ch;
-	schan.modulation = QAM_64;
-	schan.guard_interval = GUARD_INTERVAL_1_32;
-	schan.transmission_mode = TRANSMISSION_MODE_8K;
-	schan.code_rate_HP = FEC_2_3;
-	schan.code_rate_LP = FEC_3_4;
-	schan.hierarchy = 0;
-
-	dib7000p_set_channel(state, &schan, 7);
-
-	factor = BANDWIDTH_TO_KHZ(ch->bandwidth_hz);
-	if (factor >= 5000) {
-		if (state->version == SOC7090)
-			factor = 2;
-		else
-			factor = 1;
-	} else
-		factor = 6;
-
-	value = 30 * internal * factor;
-	dib7000p_write_word(state, 6, (u16) ((value >> 16) & 0xffff));
-	dib7000p_write_word(state, 7, (u16) (value & 0xffff));
-	value = 100 * internal * factor;
-	dib7000p_write_word(state, 8, (u16) ((value >> 16) & 0xffff));
-	dib7000p_write_word(state, 9, (u16) (value & 0xffff));
-	value = 500 * internal * factor;
-	dib7000p_write_word(state, 10, (u16) ((value >> 16) & 0xffff));
-	dib7000p_write_word(state, 11, (u16) (value & 0xffff));
-
-	value = dib7000p_read_word(state, 0);
-	dib7000p_write_word(state, 0, (u16) ((1 << 9) | value));
-	dib7000p_read_word(state, 1284);
-	dib7000p_write_word(state, 0, (u16) value);
-
-	return 0;
-}
-
-static int dib7000p_autosearch_is_irq(struct dvb_frontend *demod)
-{
-	struct dib7000p_state *state = demod->demodulator_priv;
-	u16 irq_pending = dib7000p_read_word(state, 1284);
-
-	if (irq_pending & 0x1)
-		return 1;
-
-	if (irq_pending & 0x2)
-		return 2;
-
-	return 0;
-}
-
-static void dib7000p_spur_protect(struct dib7000p_state *state, u32 rf_khz, u32 bw)
-{
-	static s16 notch[] = { 16143, 14402, 12238, 9713, 6902, 3888, 759, -2392 };
-	static u8 sine[] = { 0, 2, 3, 5, 6, 8, 9, 11, 13, 14, 16, 17, 19, 20, 22,
-		24, 25, 27, 28, 30, 31, 33, 34, 36, 38, 39, 41, 42, 44, 45, 47, 48, 50, 51,
-		53, 55, 56, 58, 59, 61, 62, 64, 65, 67, 68, 70, 71, 73, 74, 76, 77, 79, 80,
-		82, 83, 85, 86, 88, 89, 91, 92, 94, 95, 97, 98, 99, 101, 102, 104, 105,
-		107, 108, 109, 111, 112, 114, 115, 117, 118, 119, 121, 122, 123, 125, 126,
-		128, 129, 130, 132, 133, 134, 136, 137, 138, 140, 141, 142, 144, 145, 146,
-		147, 149, 150, 151, 152, 154, 155, 156, 157, 159, 160, 161, 162, 164, 165,
-		166, 167, 168, 170, 171, 172, 173, 174, 175, 177, 178, 179, 180, 181, 182,
-		183, 184, 185, 186, 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198,
-		199, 200, 201, 202, 203, 204, 205, 206, 207, 207, 208, 209, 210, 211, 212,
-		213, 214, 215, 215, 216, 217, 218, 219, 220, 220, 221, 222, 223, 224, 224,
-		225, 226, 227, 227, 228, 229, 229, 230, 231, 231, 232, 233, 233, 234, 235,
-		235, 236, 237, 237, 238, 238, 239, 239, 240, 241, 241, 242, 242, 243, 243,
-		244, 244, 245, 245, 245, 246, 246, 247, 247, 248, 248, 248, 249, 249, 249,
-		250, 250, 250, 251, 251, 251, 252, 252, 252, 252, 253, 253, 253, 253, 254,
-		254, 254, 254, 254, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
-		255, 255, 255, 255, 255, 255
-	};
-
-	u32 xtal = state->cfg.bw->xtal_hz / 1000;
-	int f_rel = DIV_ROUND_CLOSEST(rf_khz, xtal) * xtal - rf_khz;
-	int k;
-	int coef_re[8], coef_im[8];
-	int bw_khz = bw;
-	u32 pha;
-
-	dprintk("relative position of the Spur: %dk (RF: %dk, XTAL: %dk)", f_rel, rf_khz, xtal);
-
-	if (f_rel < -bw_khz / 2 || f_rel > bw_khz / 2)
-		return;
-
-	bw_khz /= 100;
-
-	dib7000p_write_word(state, 142, 0x0610);
-
-	for (k = 0; k < 8; k++) {
-		pha = ((f_rel * (k + 1) * 112 * 80 / bw_khz) / 1000) & 0x3ff;
-
-		if (pha == 0) {
-			coef_re[k] = 256;
-			coef_im[k] = 0;
-		} else if (pha < 256) {
-			coef_re[k] = sine[256 - (pha & 0xff)];
-			coef_im[k] = sine[pha & 0xff];
-		} else if (pha == 256) {
-			coef_re[k] = 0;
-			coef_im[k] = 256;
-		} else if (pha < 512) {
-			coef_re[k] = -sine[pha & 0xff];
-			coef_im[k] = sine[256 - (pha & 0xff)];
-		} else if (pha == 512) {
-			coef_re[k] = -256;
-			coef_im[k] = 0;
-		} else if (pha < 768) {
-			coef_re[k] = -sine[256 - (pha & 0xff)];
-			coef_im[k] = -sine[pha & 0xff];
-		} else if (pha == 768) {
-			coef_re[k] = 0;
-			coef_im[k] = -256;
-		} else {
-			coef_re[k] = sine[pha & 0xff];
-			coef_im[k] = -sine[256 - (pha & 0xff)];
-		}
-
-		coef_re[k] *= notch[k];
-		coef_re[k] += (1 << 14);
-		if (coef_re[k] >= (1 << 24))
-			coef_re[k] = (1 << 24) - 1;
-		coef_re[k] /= (1 << 15);
-
-		coef_im[k] *= notch[k];
-		coef_im[k] += (1 << 14);
-		if (coef_im[k] >= (1 << 24))
-			coef_im[k] = (1 << 24) - 1;
-		coef_im[k] /= (1 << 15);
-
-		dprintk("PALF COEF: %d re: %d im: %d", k, coef_re[k], coef_im[k]);
-
-		dib7000p_write_word(state, 143, (0 << 14) | (k << 10) | (coef_re[k] & 0x3ff));
-		dib7000p_write_word(state, 144, coef_im[k] & 0x3ff);
-		dib7000p_write_word(state, 143, (1 << 14) | (k << 10) | (coef_re[k] & 0x3ff));
-	}
-	dib7000p_write_word(state, 143, 0);
-}
-
-static int dib7000p_tune(struct dvb_frontend *demod)
-{
-	struct dtv_frontend_properties *ch = &demod->dtv_property_cache;
-	struct dib7000p_state *state = demod->demodulator_priv;
-	u16 tmp = 0;
-
-	if (ch != NULL)
-		dib7000p_set_channel(state, ch, 0);
-	else
-		return -EINVAL;
-
-	// restart demod
-	dib7000p_write_word(state, 770, 0x4000);
-	dib7000p_write_word(state, 770, 0x0000);
-	msleep(45);
-
-	/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
-	tmp = (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3);
-	if (state->sfn_workaround_active) {
-		dprintk("SFN workaround is active");
-		tmp |= (1 << 9);
-		dib7000p_write_word(state, 166, 0x4000);
-	} else {
-		dib7000p_write_word(state, 166, 0x0000);
-	}
-	dib7000p_write_word(state, 29, tmp);
-
-	// never achieved a lock with that bandwidth so far - wait for osc-freq to update
-	if (state->timf == 0)
-		msleep(200);
-
-	/* offset loop parameters */
-
-	/* P_timf_alpha, P_corm_alpha=6, P_corm_thres=0x80 */
-	tmp = (6 << 8) | 0x80;
-	switch (ch->transmission_mode) {
-	case TRANSMISSION_MODE_2K:
-		tmp |= (2 << 12);
-		break;
-	case TRANSMISSION_MODE_4K:
-		tmp |= (3 << 12);
-		break;
-	default:
-	case TRANSMISSION_MODE_8K:
-		tmp |= (4 << 12);
-		break;
-	}
-	dib7000p_write_word(state, 26, tmp);	/* timf_a(6xxx) */
-
-	/* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max */
-	tmp = (0 << 4);
-	switch (ch->transmission_mode) {
-	case TRANSMISSION_MODE_2K:
-		tmp |= 0x6;
-		break;
-	case TRANSMISSION_MODE_4K:
-		tmp |= 0x7;
-		break;
-	default:
-	case TRANSMISSION_MODE_8K:
-		tmp |= 0x8;
-		break;
-	}
-	dib7000p_write_word(state, 32, tmp);
-
-	/* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step */
-	tmp = (0 << 4);
-	switch (ch->transmission_mode) {
-	case TRANSMISSION_MODE_2K:
-		tmp |= 0x6;
-		break;
-	case TRANSMISSION_MODE_4K:
-		tmp |= 0x7;
-		break;
-	default:
-	case TRANSMISSION_MODE_8K:
-		tmp |= 0x8;
-		break;
-	}
-	dib7000p_write_word(state, 33, tmp);
-
-	tmp = dib7000p_read_word(state, 509);
-	if (!((tmp >> 6) & 0x1)) {
-		/* restart the fec */
-		tmp = dib7000p_read_word(state, 771);
-		dib7000p_write_word(state, 771, tmp | (1 << 1));
-		dib7000p_write_word(state, 771, tmp);
-		msleep(40);
-		tmp = dib7000p_read_word(state, 509);
-	}
-	// we achieved a lock - it's time to update the osc freq
-	if ((tmp >> 6) & 0x1) {
-		dib7000p_update_timf(state);
-		/* P_timf_alpha += 2 */
-		tmp = dib7000p_read_word(state, 26);
-		dib7000p_write_word(state, 26, (tmp & ~(0xf << 12)) | ((((tmp >> 12) & 0xf) + 5) << 12));
-	}
-
-	if (state->cfg.spur_protect)
-		dib7000p_spur_protect(state, ch->frequency / 1000, BANDWIDTH_TO_KHZ(ch->bandwidth_hz));
-
-	dib7000p_set_bandwidth(state, BANDWIDTH_TO_KHZ(ch->bandwidth_hz));
-	return 0;
-}
-
-static int dib7000p_wakeup(struct dvb_frontend *demod)
-{
-	struct dib7000p_state *state = demod->demodulator_priv;
-	dib7000p_set_power_mode(state, DIB7000P_POWER_ALL);
-	dib7000p_set_adc_state(state, DIBX000_SLOW_ADC_ON);
-	if (state->version == SOC7090)
-		dib7000p_sad_calib(state);
-	return 0;
-}
-
-static int dib7000p_sleep(struct dvb_frontend *demod)
-{
-	struct dib7000p_state *state = demod->demodulator_priv;
-	if (state->version == SOC7090)
-		return dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY);
-	return dib7000p_set_output_mode(state, OUTMODE_HIGH_Z) | dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY);
-}
-
-static int dib7000p_identify(struct dib7000p_state *st)
-{
-	u16 value;
-	dprintk("checking demod on I2C address: %d (%x)", st->i2c_addr, st->i2c_addr);
-
-	if ((value = dib7000p_read_word(st, 768)) != 0x01b3) {
-		dprintk("wrong Vendor ID (read=0x%x)", value);
-		return -EREMOTEIO;
-	}
-
-	if ((value = dib7000p_read_word(st, 769)) != 0x4000) {
-		dprintk("wrong Device ID (%x)", value);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int dib7000p_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
-	struct dib7000p_state *state = fe->demodulator_priv;
-	u16 tps = dib7000p_read_word(state, 463);
-
-	fep->inversion = INVERSION_AUTO;
-
-	fep->bandwidth_hz = BANDWIDTH_TO_HZ(state->current_bandwidth);
-
-	switch ((tps >> 8) & 0x3) {
-	case 0:
-		fep->transmission_mode = TRANSMISSION_MODE_2K;
-		break;
-	case 1:
-		fep->transmission_mode = TRANSMISSION_MODE_8K;
-		break;
-	/* case 2: fep->transmission_mode = TRANSMISSION_MODE_4K; break; */
-	}
-
-	switch (tps & 0x3) {
-	case 0:
-		fep->guard_interval = GUARD_INTERVAL_1_32;
-		break;
-	case 1:
-		fep->guard_interval = GUARD_INTERVAL_1_16;
-		break;
-	case 2:
-		fep->guard_interval = GUARD_INTERVAL_1_8;
-		break;
-	case 3:
-		fep->guard_interval = GUARD_INTERVAL_1_4;
-		break;
-	}
-
-	switch ((tps >> 14) & 0x3) {
-	case 0:
-		fep->modulation = QPSK;
-		break;
-	case 1:
-		fep->modulation = QAM_16;
-		break;
-	case 2:
-	default:
-		fep->modulation = QAM_64;
-		break;
-	}
-
-	/* as long as the frontend_param structure is fixed for hierarchical transmission I refuse to use it */
-	/* (tps >> 13) & 0x1 == hrch is used, (tps >> 10) & 0x7 == alpha */
-
-	fep->hierarchy = HIERARCHY_NONE;
-	switch ((tps >> 5) & 0x7) {
-	case 1:
-		fep->code_rate_HP = FEC_1_2;
-		break;
-	case 2:
-		fep->code_rate_HP = FEC_2_3;
-		break;
-	case 3:
-		fep->code_rate_HP = FEC_3_4;
-		break;
-	case 5:
-		fep->code_rate_HP = FEC_5_6;
-		break;
-	case 7:
-	default:
-		fep->code_rate_HP = FEC_7_8;
-		break;
-
-	}
-
-	switch ((tps >> 2) & 0x7) {
-	case 1:
-		fep->code_rate_LP = FEC_1_2;
-		break;
-	case 2:
-		fep->code_rate_LP = FEC_2_3;
-		break;
-	case 3:
-		fep->code_rate_LP = FEC_3_4;
-		break;
-	case 5:
-		fep->code_rate_LP = FEC_5_6;
-		break;
-	case 7:
-	default:
-		fep->code_rate_LP = FEC_7_8;
-		break;
-	}
-
-	/* native interleaver: (dib7000p_read_word(state, 464) >>  5) & 0x1 */
-
-	return 0;
-}
-
-static int dib7000p_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
-	struct dib7000p_state *state = fe->demodulator_priv;
-	int time, ret;
-
-	if (state->version == SOC7090)
-		dib7090_set_diversity_in(fe, 0);
-	else
-		dib7000p_set_output_mode(state, OUTMODE_HIGH_Z);
-
-	/* maybe the parameter has been changed */
-	state->sfn_workaround_active = buggy_sfn_workaround;
-
-	if (fe->ops.tuner_ops.set_params)
-		fe->ops.tuner_ops.set_params(fe);
-
-	/* start up the AGC */
-	state->agc_state = 0;
-	do {
-		time = dib7000p_agc_startup(fe);
-		if (time != -1)
-			msleep(time);
-	} while (time != -1);
-
-	if (fep->transmission_mode == TRANSMISSION_MODE_AUTO ||
-		fep->guard_interval == GUARD_INTERVAL_AUTO || fep->modulation == QAM_AUTO || fep->code_rate_HP == FEC_AUTO) {
-		int i = 800, found;
-
-		dib7000p_autosearch_start(fe);
-		do {
-			msleep(1);
-			found = dib7000p_autosearch_is_irq(fe);
-		} while (found == 0 && i--);
-
-		dprintk("autosearch returns: %d", found);
-		if (found == 0 || found == 1)
-			return 0;
-
-		dib7000p_get_frontend(fe);
-	}
-
-	ret = dib7000p_tune(fe);
-
-	/* make this a config parameter */
-	if (state->version == SOC7090) {
-		dib7090_set_output_mode(fe, state->cfg.output_mode);
-		if (state->cfg.enMpegOutput == 0) {
-			dib7090_setDibTxMux(state, MPEG_ON_DIBTX);
-			dib7090_setHostBusMux(state, DIBTX_ON_HOSTBUS);
-		}
-	} else
-		dib7000p_set_output_mode(state, state->cfg.output_mode);
-
-	return ret;
-}
-
-static int dib7000p_read_status(struct dvb_frontend *fe, fe_status_t * stat)
-{
-	struct dib7000p_state *state = fe->demodulator_priv;
-	u16 lock = dib7000p_read_word(state, 509);
-
-	*stat = 0;
-
-	if (lock & 0x8000)
-		*stat |= FE_HAS_SIGNAL;
-	if (lock & 0x3000)
-		*stat |= FE_HAS_CARRIER;
-	if (lock & 0x0100)
-		*stat |= FE_HAS_VITERBI;
-	if (lock & 0x0010)
-		*stat |= FE_HAS_SYNC;
-	if ((lock & 0x0038) == 0x38)
-		*stat |= FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int dib7000p_read_ber(struct dvb_frontend *fe, u32 * ber)
-{
-	struct dib7000p_state *state = fe->demodulator_priv;
-	*ber = (dib7000p_read_word(state, 500) << 16) | dib7000p_read_word(state, 501);
-	return 0;
-}
-
-static int dib7000p_read_unc_blocks(struct dvb_frontend *fe, u32 * unc)
-{
-	struct dib7000p_state *state = fe->demodulator_priv;
-	*unc = dib7000p_read_word(state, 506);
-	return 0;
-}
-
-static int dib7000p_read_signal_strength(struct dvb_frontend *fe, u16 * strength)
-{
-	struct dib7000p_state *state = fe->demodulator_priv;
-	u16 val = dib7000p_read_word(state, 394);
-	*strength = 65535 - val;
-	return 0;
-}
-
-static int dib7000p_read_snr(struct dvb_frontend *fe, u16 * snr)
-{
-	struct dib7000p_state *state = fe->demodulator_priv;
-	u16 val;
-	s32 signal_mant, signal_exp, noise_mant, noise_exp;
-	u32 result = 0;
-
-	val = dib7000p_read_word(state, 479);
-	noise_mant = (val >> 4) & 0xff;
-	noise_exp = ((val & 0xf) << 2);
-	val = dib7000p_read_word(state, 480);
-	noise_exp += ((val >> 14) & 0x3);
-	if ((noise_exp & 0x20) != 0)
-		noise_exp -= 0x40;
-
-	signal_mant = (val >> 6) & 0xFF;
-	signal_exp = (val & 0x3F);
-	if ((signal_exp & 0x20) != 0)
-		signal_exp -= 0x40;
-
-	if (signal_mant != 0)
-		result = intlog10(2) * 10 * signal_exp + 10 * intlog10(signal_mant);
-	else
-		result = intlog10(2) * 10 * signal_exp - 100;
-
-	if (noise_mant != 0)
-		result -= intlog10(2) * 10 * noise_exp + 10 * intlog10(noise_mant);
-	else
-		result -= intlog10(2) * 10 * noise_exp - 100;
-
-	*snr = result / ((1 << 24) / 10);
-	return 0;
-}
-
-static int dib7000p_fe_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *tune)
-{
-	tune->min_delay_ms = 1000;
-	return 0;
-}
-
-static void dib7000p_release(struct dvb_frontend *demod)
-{
-	struct dib7000p_state *st = demod->demodulator_priv;
-	dibx000_exit_i2c_master(&st->i2c_master);
-	i2c_del_adapter(&st->dib7090_tuner_adap);
-	kfree(st);
-}
-
-int dib7000pc_detection(struct i2c_adapter *i2c_adap)
-{
-	u8 *tx, *rx;
-	struct i2c_msg msg[2] = {
-		{.addr = 18 >> 1, .flags = 0, .len = 2},
-		{.addr = 18 >> 1, .flags = I2C_M_RD, .len = 2},
-	};
-	int ret = 0;
-
-	tx = kzalloc(2*sizeof(u8), GFP_KERNEL);
-	if (!tx)
-		return -ENOMEM;
-	rx = kzalloc(2*sizeof(u8), GFP_KERNEL);
-	if (!rx) {
-		ret = -ENOMEM;
-		goto rx_memory_error;
-	}
-
-	msg[0].buf = tx;
-	msg[1].buf = rx;
-
-	tx[0] = 0x03;
-	tx[1] = 0x00;
-
-	if (i2c_transfer(i2c_adap, msg, 2) == 2)
-		if (rx[0] == 0x01 && rx[1] == 0xb3) {
-			dprintk("-D-  DiB7000PC detected");
-			return 1;
-		}
-
-	msg[0].addr = msg[1].addr = 0x40;
-
-	if (i2c_transfer(i2c_adap, msg, 2) == 2)
-		if (rx[0] == 0x01 && rx[1] == 0xb3) {
-			dprintk("-D-  DiB7000PC detected");
-			return 1;
-		}
-
-	dprintk("-D-  DiB7000PC not detected");
-
-	kfree(rx);
-rx_memory_error:
-	kfree(tx);
-	return ret;
-}
-EXPORT_SYMBOL(dib7000pc_detection);
-
-struct i2c_adapter *dib7000p_get_i2c_master(struct dvb_frontend *demod, enum dibx000_i2c_interface intf, int gating)
-{
-	struct dib7000p_state *st = demod->demodulator_priv;
-	return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating);
-}
-EXPORT_SYMBOL(dib7000p_get_i2c_master);
-
-int dib7000p_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff)
-{
-	struct dib7000p_state *state = fe->demodulator_priv;
-	u16 val = dib7000p_read_word(state, 235) & 0xffef;
-	val |= (onoff & 0x1) << 4;
-	dprintk("PID filter enabled %d", onoff);
-	return dib7000p_write_word(state, 235, val);
-}
-EXPORT_SYMBOL(dib7000p_pid_filter_ctrl);
-
-int dib7000p_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff)
-{
-	struct dib7000p_state *state = fe->demodulator_priv;
-	dprintk("PID filter: index %x, PID %d, OnOff %d", id, pid, onoff);
-	return dib7000p_write_word(state, 241 + id, onoff ? (1 << 13) | pid : 0);
-}
-EXPORT_SYMBOL(dib7000p_pid_filter);
-
-int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[])
-{
-	struct dib7000p_state *dpst;
-	int k = 0;
-	u8 new_addr = 0;
-
-	dpst = kzalloc(sizeof(struct dib7000p_state), GFP_KERNEL);
-	if (!dpst)
-		return -ENOMEM;
-
-	dpst->i2c_adap = i2c;
-	mutex_init(&dpst->i2c_buffer_lock);
-
-	for (k = no_of_demods - 1; k >= 0; k--) {
-		dpst->cfg = cfg[k];
-
-		/* designated i2c address */
-		if (cfg[k].default_i2c_addr != 0)
-			new_addr = cfg[k].default_i2c_addr + (k << 1);
-		else
-			new_addr = (0x40 + k) << 1;
-		dpst->i2c_addr = new_addr;
-		dib7000p_write_word(dpst, 1287, 0x0003);	/* sram lead in, rdy */
-		if (dib7000p_identify(dpst) != 0) {
-			dpst->i2c_addr = default_addr;
-			dib7000p_write_word(dpst, 1287, 0x0003);	/* sram lead in, rdy */
-			if (dib7000p_identify(dpst) != 0) {
-				dprintk("DiB7000P #%d: not identified\n", k);
-				kfree(dpst);
-				return -EIO;
-			}
-		}
-
-		/* start diversity to pull_down div_str - just for i2c-enumeration */
-		dib7000p_set_output_mode(dpst, OUTMODE_DIVERSITY);
-
-		/* set new i2c address and force divstart */
-		dib7000p_write_word(dpst, 1285, (new_addr << 2) | 0x2);
-
-		dprintk("IC %d initialized (to i2c_address 0x%x)", k, new_addr);
-	}
-
-	for (k = 0; k < no_of_demods; k++) {
-		dpst->cfg = cfg[k];
-		if (cfg[k].default_i2c_addr != 0)
-			dpst->i2c_addr = (cfg[k].default_i2c_addr + k) << 1;
-		else
-			dpst->i2c_addr = (0x40 + k) << 1;
-
-		// unforce divstr
-		dib7000p_write_word(dpst, 1285, dpst->i2c_addr << 2);
-
-		/* deactivate div - it was just for i2c-enumeration */
-		dib7000p_set_output_mode(dpst, OUTMODE_HIGH_Z);
-	}
-
-	kfree(dpst);
-	return 0;
-}
-EXPORT_SYMBOL(dib7000p_i2c_enumeration);
-
-static const s32 lut_1000ln_mant[] = {
-	6908, 6956, 7003, 7047, 7090, 7131, 7170, 7208, 7244, 7279, 7313, 7346, 7377, 7408, 7438, 7467, 7495, 7523, 7549, 7575, 7600
-};
-
-static s32 dib7000p_get_adc_power(struct dvb_frontend *fe)
-{
-	struct dib7000p_state *state = fe->demodulator_priv;
-	u32 tmp_val = 0, exp = 0, mant = 0;
-	s32 pow_i;
-	u16 buf[2];
-	u8 ix = 0;
-
-	buf[0] = dib7000p_read_word(state, 0x184);
-	buf[1] = dib7000p_read_word(state, 0x185);
-	pow_i = (buf[0] << 16) | buf[1];
-	dprintk("raw pow_i = %d", pow_i);
-
-	tmp_val = pow_i;
-	while (tmp_val >>= 1)
-		exp++;
-
-	mant = (pow_i * 1000 / (1 << exp));
-	dprintk(" mant = %d exp = %d", mant / 1000, exp);
-
-	ix = (u8) ((mant - 1000) / 100);	/* index of the LUT */
-	dprintk(" ix = %d", ix);
-
-	pow_i = (lut_1000ln_mant[ix] + 693 * (exp - 20) - 6908);
-	pow_i = (pow_i << 8) / 1000;
-	dprintk(" pow_i = %d", pow_i);
-
-	return pow_i;
-}
-
-static int map_addr_to_serpar_number(struct i2c_msg *msg)
-{
-	if ((msg->buf[0] <= 15))
-		msg->buf[0] -= 1;
-	else if (msg->buf[0] == 17)
-		msg->buf[0] = 15;
-	else if (msg->buf[0] == 16)
-		msg->buf[0] = 17;
-	else if (msg->buf[0] == 19)
-		msg->buf[0] = 16;
-	else if (msg->buf[0] >= 21 && msg->buf[0] <= 25)
-		msg->buf[0] -= 3;
-	else if (msg->buf[0] == 28)
-		msg->buf[0] = 23;
-	else
-		return -EINVAL;
-	return 0;
-}
-
-static int w7090p_tuner_write_serpar(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num)
-{
-	struct dib7000p_state *state = i2c_get_adapdata(i2c_adap);
-	u8 n_overflow = 1;
-	u16 i = 1000;
-	u16 serpar_num = msg[0].buf[0];
-
-	while (n_overflow == 1 && i) {
-		n_overflow = (dib7000p_read_word(state, 1984) >> 1) & 0x1;
-		i--;
-		if (i == 0)
-			dprintk("Tuner ITF: write busy (overflow)");
-	}
-	dib7000p_write_word(state, 1985, (1 << 6) | (serpar_num & 0x3f));
-	dib7000p_write_word(state, 1986, (msg[0].buf[1] << 8) | msg[0].buf[2]);
-
-	return num;
-}
-
-static int w7090p_tuner_read_serpar(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num)
-{
-	struct dib7000p_state *state = i2c_get_adapdata(i2c_adap);
-	u8 n_overflow = 1, n_empty = 1;
-	u16 i = 1000;
-	u16 serpar_num = msg[0].buf[0];
-	u16 read_word;
-
-	while (n_overflow == 1 && i) {
-		n_overflow = (dib7000p_read_word(state, 1984) >> 1) & 0x1;
-		i--;
-		if (i == 0)
-			dprintk("TunerITF: read busy (overflow)");
-	}
-	dib7000p_write_word(state, 1985, (0 << 6) | (serpar_num & 0x3f));
-
-	i = 1000;
-	while (n_empty == 1 && i) {
-		n_empty = dib7000p_read_word(state, 1984) & 0x1;
-		i--;
-		if (i == 0)
-			dprintk("TunerITF: read busy (empty)");
-	}
-	read_word = dib7000p_read_word(state, 1987);
-	msg[1].buf[0] = (read_word >> 8) & 0xff;
-	msg[1].buf[1] = (read_word) & 0xff;
-
-	return num;
-}
-
-static int w7090p_tuner_rw_serpar(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num)
-{
-	if (map_addr_to_serpar_number(&msg[0]) == 0) {	/* else = Tuner regs to ignore : DIG_CFG, CTRL_RF_LT, PLL_CFG, PWM1_REG, ADCCLK, DIG_CFG_3; SLEEP_EN... */
-		if (num == 1) {	/* write */
-			return w7090p_tuner_write_serpar(i2c_adap, msg, 1);
-		} else {	/* read */
-			return w7090p_tuner_read_serpar(i2c_adap, msg, 2);
-		}
-	}
-	return num;
-}
-
-static int dib7090p_rw_on_apb(struct i2c_adapter *i2c_adap,
-		struct i2c_msg msg[], int num, u16 apb_address)
-{
-	struct dib7000p_state *state = i2c_get_adapdata(i2c_adap);
-	u16 word;
-
-	if (num == 1) {		/* write */
-		dib7000p_write_word(state, apb_address, ((msg[0].buf[1] << 8) | (msg[0].buf[2])));
-	} else {
-		word = dib7000p_read_word(state, apb_address);
-		msg[1].buf[0] = (word >> 8) & 0xff;
-		msg[1].buf[1] = (word) & 0xff;
-	}
-
-	return num;
-}
-
-static int dib7090_tuner_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num)
-{
-	struct dib7000p_state *state = i2c_get_adapdata(i2c_adap);
-
-	u16 apb_address = 0, word;
-	int i = 0;
-	switch (msg[0].buf[0]) {
-	case 0x12:
-		apb_address = 1920;
-		break;
-	case 0x14:
-		apb_address = 1921;
-		break;
-	case 0x24:
-		apb_address = 1922;
-		break;
-	case 0x1a:
-		apb_address = 1923;
-		break;
-	case 0x22:
-		apb_address = 1924;
-		break;
-	case 0x33:
-		apb_address = 1926;
-		break;
-	case 0x34:
-		apb_address = 1927;
-		break;
-	case 0x35:
-		apb_address = 1928;
-		break;
-	case 0x36:
-		apb_address = 1929;
-		break;
-	case 0x37:
-		apb_address = 1930;
-		break;
-	case 0x38:
-		apb_address = 1931;
-		break;
-	case 0x39:
-		apb_address = 1932;
-		break;
-	case 0x2a:
-		apb_address = 1935;
-		break;
-	case 0x2b:
-		apb_address = 1936;
-		break;
-	case 0x2c:
-		apb_address = 1937;
-		break;
-	case 0x2d:
-		apb_address = 1938;
-		break;
-	case 0x2e:
-		apb_address = 1939;
-		break;
-	case 0x2f:
-		apb_address = 1940;
-		break;
-	case 0x30:
-		apb_address = 1941;
-		break;
-	case 0x31:
-		apb_address = 1942;
-		break;
-	case 0x32:
-		apb_address = 1943;
-		break;
-	case 0x3e:
-		apb_address = 1944;
-		break;
-	case 0x3f:
-		apb_address = 1945;
-		break;
-	case 0x40:
-		apb_address = 1948;
-		break;
-	case 0x25:
-		apb_address = 914;
-		break;
-	case 0x26:
-		apb_address = 915;
-		break;
-	case 0x27:
-		apb_address = 917;
-		break;
-	case 0x28:
-		apb_address = 916;
-		break;
-	case 0x1d:
-		i = ((dib7000p_read_word(state, 72) >> 12) & 0x3);
-		word = dib7000p_read_word(state, 384 + i);
-		msg[1].buf[0] = (word >> 8) & 0xff;
-		msg[1].buf[1] = (word) & 0xff;
-		return num;
-	case 0x1f:
-		if (num == 1) {	/* write */
-			word = (u16) ((msg[0].buf[1] << 8) | msg[0].buf[2]);
-			word &= 0x3;
-			word = (dib7000p_read_word(state, 72) & ~(3 << 12)) | (word << 12);
-			dib7000p_write_word(state, 72, word);	/* Set the proper input */
-			return num;
-		}
-	}
-
-	if (apb_address != 0)	/* R/W acces via APB */
-		return dib7090p_rw_on_apb(i2c_adap, msg, num, apb_address);
-	else			/* R/W access via SERPAR  */
-		return w7090p_tuner_rw_serpar(i2c_adap, msg, num);
-
-	return 0;
-}
-
-static u32 dib7000p_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm dib7090_tuner_xfer_algo = {
-	.master_xfer = dib7090_tuner_xfer,
-	.functionality = dib7000p_i2c_func,
-};
-
-struct i2c_adapter *dib7090_get_i2c_tuner(struct dvb_frontend *fe)
-{
-	struct dib7000p_state *st = fe->demodulator_priv;
-	return &st->dib7090_tuner_adap;
-}
-EXPORT_SYMBOL(dib7090_get_i2c_tuner);
-
-static int dib7090_host_bus_drive(struct dib7000p_state *state, u8 drive)
-{
-	u16 reg;
-
-	/* drive host bus 2, 3, 4 */
-	reg = dib7000p_read_word(state, 1798) & ~((0x7) | (0x7 << 6) | (0x7 << 12));
-	reg |= (drive << 12) | (drive << 6) | drive;
-	dib7000p_write_word(state, 1798, reg);
-
-	/* drive host bus 5,6 */
-	reg = dib7000p_read_word(state, 1799) & ~((0x7 << 2) | (0x7 << 8));
-	reg |= (drive << 8) | (drive << 2);
-	dib7000p_write_word(state, 1799, reg);
-
-	/* drive host bus 7, 8, 9 */
-	reg = dib7000p_read_word(state, 1800) & ~((0x7) | (0x7 << 6) | (0x7 << 12));
-	reg |= (drive << 12) | (drive << 6) | drive;
-	dib7000p_write_word(state, 1800, reg);
-
-	/* drive host bus 10, 11 */
-	reg = dib7000p_read_word(state, 1801) & ~((0x7 << 2) | (0x7 << 8));
-	reg |= (drive << 8) | (drive << 2);
-	dib7000p_write_word(state, 1801, reg);
-
-	/* drive host bus 12, 13, 14 */
-	reg = dib7000p_read_word(state, 1802) & ~((0x7) | (0x7 << 6) | (0x7 << 12));
-	reg |= (drive << 12) | (drive << 6) | drive;
-	dib7000p_write_word(state, 1802, reg);
-
-	return 0;
-}
-
-static u32 dib7090_calcSyncFreq(u32 P_Kin, u32 P_Kout, u32 insertExtSynchro, u32 syncSize)
-{
-	u32 quantif = 3;
-	u32 nom = (insertExtSynchro * P_Kin + syncSize);
-	u32 denom = P_Kout;
-	u32 syncFreq = ((nom << quantif) / denom);
-
-	if ((syncFreq & ((1 << quantif) - 1)) != 0)
-		syncFreq = (syncFreq >> quantif) + 1;
-	else
-		syncFreq = (syncFreq >> quantif);
-
-	if (syncFreq != 0)
-		syncFreq = syncFreq - 1;
-
-	return syncFreq;
-}
-
-static int dib7090_cfg_DibTx(struct dib7000p_state *state, u32 P_Kin, u32 P_Kout, u32 insertExtSynchro, u32 synchroMode, u32 syncWord, u32 syncSize)
-{
-	dprintk("Configure DibStream Tx");
-
-	dib7000p_write_word(state, 1615, 1);
-	dib7000p_write_word(state, 1603, P_Kin);
-	dib7000p_write_word(state, 1605, P_Kout);
-	dib7000p_write_word(state, 1606, insertExtSynchro);
-	dib7000p_write_word(state, 1608, synchroMode);
-	dib7000p_write_word(state, 1609, (syncWord >> 16) & 0xffff);
-	dib7000p_write_word(state, 1610, syncWord & 0xffff);
-	dib7000p_write_word(state, 1612, syncSize);
-	dib7000p_write_word(state, 1615, 0);
-
-	return 0;
-}
-
-static int dib7090_cfg_DibRx(struct dib7000p_state *state, u32 P_Kin, u32 P_Kout, u32 synchroMode, u32 insertExtSynchro, u32 syncWord, u32 syncSize,
-		u32 dataOutRate)
-{
-	u32 syncFreq;
-
-	dprintk("Configure DibStream Rx");
-	if ((P_Kin != 0) && (P_Kout != 0)) {
-		syncFreq = dib7090_calcSyncFreq(P_Kin, P_Kout, insertExtSynchro, syncSize);
-		dib7000p_write_word(state, 1542, syncFreq);
-	}
-	dib7000p_write_word(state, 1554, 1);
-	dib7000p_write_word(state, 1536, P_Kin);
-	dib7000p_write_word(state, 1537, P_Kout);
-	dib7000p_write_word(state, 1539, synchroMode);
-	dib7000p_write_word(state, 1540, (syncWord >> 16) & 0xffff);
-	dib7000p_write_word(state, 1541, syncWord & 0xffff);
-	dib7000p_write_word(state, 1543, syncSize);
-	dib7000p_write_word(state, 1544, dataOutRate);
-	dib7000p_write_word(state, 1554, 0);
-
-	return 0;
-}
-
-static void dib7090_enMpegMux(struct dib7000p_state *state, int onoff)
-{
-	u16 reg_1287 = dib7000p_read_word(state, 1287);
-
-	switch (onoff) {
-	case 1:
-			reg_1287 &= ~(1<<7);
-			break;
-	case 0:
-			reg_1287 |= (1<<7);
-			break;
-	}
-
-	dib7000p_write_word(state, 1287, reg_1287);
-}
-
-static void dib7090_configMpegMux(struct dib7000p_state *state,
-		u16 pulseWidth, u16 enSerialMode, u16 enSerialClkDiv2)
-{
-	dprintk("Enable Mpeg mux");
-
-	dib7090_enMpegMux(state, 0);
-
-	/* If the input mode is MPEG do not divide the serial clock */
-	if ((enSerialMode == 1) && (state->input_mode_mpeg == 1))
-		enSerialClkDiv2 = 0;
-
-	dib7000p_write_word(state, 1287, ((pulseWidth & 0x1f) << 2)
-			| ((enSerialMode & 0x1) << 1)
-			| (enSerialClkDiv2 & 0x1));
-
-	dib7090_enMpegMux(state, 1);
-}
-
-static void dib7090_setDibTxMux(struct dib7000p_state *state, int mode)
-{
-	u16 reg_1288 = dib7000p_read_word(state, 1288) & ~(0x7 << 7);
-
-	switch (mode) {
-	case MPEG_ON_DIBTX:
-			dprintk("SET MPEG ON DIBSTREAM TX");
-			dib7090_cfg_DibTx(state, 8, 5, 0, 0, 0, 0);
-			reg_1288 |= (1<<9);
-			break;
-	case DIV_ON_DIBTX:
-			dprintk("SET DIV_OUT ON DIBSTREAM TX");
-			dib7090_cfg_DibTx(state, 5, 5, 0, 0, 0, 0);
-			reg_1288 |= (1<<8);
-			break;
-	case ADC_ON_DIBTX:
-			dprintk("SET ADC_OUT ON DIBSTREAM TX");
-			dib7090_cfg_DibTx(state, 20, 5, 10, 0, 0, 0);
-			reg_1288 |= (1<<7);
-			break;
-	default:
-			break;
-	}
-	dib7000p_write_word(state, 1288, reg_1288);
-}
-
-static void dib7090_setHostBusMux(struct dib7000p_state *state, int mode)
-{
-	u16 reg_1288 = dib7000p_read_word(state, 1288) & ~(0x7 << 4);
-
-	switch (mode) {
-	case DEMOUT_ON_HOSTBUS:
-			dprintk("SET DEM OUT OLD INTERF ON HOST BUS");
-			dib7090_enMpegMux(state, 0);
-			reg_1288 |= (1<<6);
-			break;
-	case DIBTX_ON_HOSTBUS:
-			dprintk("SET DIBSTREAM TX ON HOST BUS");
-			dib7090_enMpegMux(state, 0);
-			reg_1288 |= (1<<5);
-			break;
-	case MPEG_ON_HOSTBUS:
-			dprintk("SET MPEG MUX ON HOST BUS");
-			reg_1288 |= (1<<4);
-			break;
-	default:
-			break;
-	}
-	dib7000p_write_word(state, 1288, reg_1288);
-}
-
-int dib7090_set_diversity_in(struct dvb_frontend *fe, int onoff)
-{
-	struct dib7000p_state *state = fe->demodulator_priv;
-	u16 reg_1287;
-
-	switch (onoff) {
-	case 0: /* only use the internal way - not the diversity input */
-			dprintk("%s mode OFF : by default Enable Mpeg INPUT", __func__);
-			dib7090_cfg_DibRx(state, 8, 5, 0, 0, 0, 8, 0);
-
-			/* Do not divide the serial clock of MPEG MUX */
-			/* in SERIAL MODE in case input mode MPEG is used */
-			reg_1287 = dib7000p_read_word(state, 1287);
-			/* enSerialClkDiv2 == 1 ? */
-			if ((reg_1287 & 0x1) == 1) {
-				/* force enSerialClkDiv2 = 0 */
-				reg_1287 &= ~0x1;
-				dib7000p_write_word(state, 1287, reg_1287);
-			}
-			state->input_mode_mpeg = 1;
-			break;
-	case 1: /* both ways */
-	case 2: /* only the diversity input */
-			dprintk("%s ON : Enable diversity INPUT", __func__);
-			dib7090_cfg_DibRx(state, 5, 5, 0, 0, 0, 0, 0);
-			state->input_mode_mpeg = 0;
-			break;
-	}
-
-	dib7000p_set_diversity_in(&state->demod, onoff);
-	return 0;
-}
-
-static int dib7090_set_output_mode(struct dvb_frontend *fe, int mode)
-{
-	struct dib7000p_state *state = fe->demodulator_priv;
-
-	u16 outreg, smo_mode, fifo_threshold;
-	u8 prefer_mpeg_mux_use = 1;
-	int ret = 0;
-
-	dib7090_host_bus_drive(state, 1);
-
-	fifo_threshold = 1792;
-	smo_mode = (dib7000p_read_word(state, 235) & 0x0050) | (1 << 1);
-	outreg = dib7000p_read_word(state, 1286) & ~((1 << 10) | (0x7 << 6) | (1 << 1));
-
-	switch (mode) {
-	case OUTMODE_HIGH_Z:
-		outreg = 0;
-		break;
-
-	case OUTMODE_MPEG2_SERIAL:
-		if (prefer_mpeg_mux_use) {
-			dprintk("setting output mode TS_SERIAL using Mpeg Mux");
-			dib7090_configMpegMux(state, 3, 1, 1);
-			dib7090_setHostBusMux(state, MPEG_ON_HOSTBUS);
-		} else {/* Use Smooth block */
-			dprintk("setting output mode TS_SERIAL using Smooth bloc");
-			dib7090_setHostBusMux(state, DEMOUT_ON_HOSTBUS);
-			outreg |= (2<<6) | (0 << 1);
-		}
-		break;
-
-	case OUTMODE_MPEG2_PAR_GATED_CLK:
-		if (prefer_mpeg_mux_use) {
-			dprintk("setting output mode TS_PARALLEL_GATED using Mpeg Mux");
-			dib7090_configMpegMux(state, 2, 0, 0);
-			dib7090_setHostBusMux(state, MPEG_ON_HOSTBUS);
-		} else { /* Use Smooth block */
-			dprintk("setting output mode TS_PARALLEL_GATED using Smooth block");
-			dib7090_setHostBusMux(state, DEMOUT_ON_HOSTBUS);
-			outreg |= (0<<6);
-		}
-		break;
-
-	case OUTMODE_MPEG2_PAR_CONT_CLK:	/* Using Smooth block only */
-		dprintk("setting output mode TS_PARALLEL_CONT using Smooth block");
-		dib7090_setHostBusMux(state, DEMOUT_ON_HOSTBUS);
-		outreg |= (1<<6);
-		break;
-
-	case OUTMODE_MPEG2_FIFO:	/* Using Smooth block because not supported by new Mpeg Mux bloc */
-		dprintk("setting output mode TS_FIFO using Smooth block");
-		dib7090_setHostBusMux(state, DEMOUT_ON_HOSTBUS);
-		outreg |= (5<<6);
-		smo_mode |= (3 << 1);
-		fifo_threshold = 512;
-		break;
-
-	case OUTMODE_DIVERSITY:
-		dprintk("setting output mode MODE_DIVERSITY");
-		dib7090_setDibTxMux(state, DIV_ON_DIBTX);
-		dib7090_setHostBusMux(state, DIBTX_ON_HOSTBUS);
-		break;
-
-	case OUTMODE_ANALOG_ADC:
-		dprintk("setting output mode MODE_ANALOG_ADC");
-		dib7090_setDibTxMux(state, ADC_ON_DIBTX);
-		dib7090_setHostBusMux(state, DIBTX_ON_HOSTBUS);
-		break;
-	}
-	if (mode != OUTMODE_HIGH_Z)
-		outreg |= (1 << 10);
-
-	if (state->cfg.output_mpeg2_in_188_bytes)
-		smo_mode |= (1 << 5);
-
-	ret |= dib7000p_write_word(state, 235, smo_mode);
-	ret |= dib7000p_write_word(state, 236, fifo_threshold);	/* synchronous fread */
-	ret |= dib7000p_write_word(state, 1286, outreg);
-
-	return ret;
-}
-
-int dib7090_tuner_sleep(struct dvb_frontend *fe, int onoff)
-{
-	struct dib7000p_state *state = fe->demodulator_priv;
-	u16 en_cur_state;
-
-	dprintk("sleep dib7090: %d", onoff);
-
-	en_cur_state = dib7000p_read_word(state, 1922);
-
-	if (en_cur_state > 0xff)
-		state->tuner_enable = en_cur_state;
-
-	if (onoff)
-		en_cur_state &= 0x00ff;
-	else {
-		if (state->tuner_enable != 0)
-			en_cur_state = state->tuner_enable;
-	}
-
-	dib7000p_write_word(state, 1922, en_cur_state);
-
-	return 0;
-}
-EXPORT_SYMBOL(dib7090_tuner_sleep);
-
-int dib7090_get_adc_power(struct dvb_frontend *fe)
-{
-	return dib7000p_get_adc_power(fe);
-}
-EXPORT_SYMBOL(dib7090_get_adc_power);
-
-int dib7090_slave_reset(struct dvb_frontend *fe)
-{
-	struct dib7000p_state *state = fe->demodulator_priv;
-	u16 reg;
-
-	reg = dib7000p_read_word(state, 1794);
-	dib7000p_write_word(state, 1794, reg | (4 << 12));
-
-	dib7000p_write_word(state, 1032, 0xffff);
-	return 0;
-}
-EXPORT_SYMBOL(dib7090_slave_reset);
-
-static struct dvb_frontend_ops dib7000p_ops;
-struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg)
-{
-	struct dvb_frontend *demod;
-	struct dib7000p_state *st;
-	st = kzalloc(sizeof(struct dib7000p_state), GFP_KERNEL);
-	if (st == NULL)
-		return NULL;
-
-	memcpy(&st->cfg, cfg, sizeof(struct dib7000p_config));
-	st->i2c_adap = i2c_adap;
-	st->i2c_addr = i2c_addr;
-	st->gpio_val = cfg->gpio_val;
-	st->gpio_dir = cfg->gpio_dir;
-
-	/* Ensure the output mode remains at the previous default if it's
-	 * not specifically set by the caller.
-	 */
-	if ((st->cfg.output_mode != OUTMODE_MPEG2_SERIAL) && (st->cfg.output_mode != OUTMODE_MPEG2_PAR_GATED_CLK))
-		st->cfg.output_mode = OUTMODE_MPEG2_FIFO;
-
-	demod = &st->demod;
-	demod->demodulator_priv = st;
-	memcpy(&st->demod.ops, &dib7000p_ops, sizeof(struct dvb_frontend_ops));
-	mutex_init(&st->i2c_buffer_lock);
-
-	dib7000p_write_word(st, 1287, 0x0003);	/* sram lead in, rdy */
-
-	if (dib7000p_identify(st) != 0)
-		goto error;
-
-	st->version = dib7000p_read_word(st, 897);
-
-	/* FIXME: make sure the dev.parent field is initialized, or else
-	   request_firmware() will hit an OOPS (this should be moved somewhere
-	   more common) */
-	st->i2c_master.gated_tuner_i2c_adap.dev.parent = i2c_adap->dev.parent;
-
-	dibx000_init_i2c_master(&st->i2c_master, DIB7000P, st->i2c_adap, st->i2c_addr);
-
-	/* init 7090 tuner adapter */
-	strncpy(st->dib7090_tuner_adap.name, "DiB7090 tuner interface", sizeof(st->dib7090_tuner_adap.name));
-	st->dib7090_tuner_adap.algo = &dib7090_tuner_xfer_algo;
-	st->dib7090_tuner_adap.algo_data = NULL;
-	st->dib7090_tuner_adap.dev.parent = st->i2c_adap->dev.parent;
-	i2c_set_adapdata(&st->dib7090_tuner_adap, st);
-	i2c_add_adapter(&st->dib7090_tuner_adap);
-
-	dib7000p_demod_reset(st);
-
-	if (st->version == SOC7090) {
-		dib7090_set_output_mode(demod, st->cfg.output_mode);
-		dib7090_set_diversity_in(demod, 0);
-	}
-
-	return demod;
-
-error:
-	kfree(st);
-	return NULL;
-}
-EXPORT_SYMBOL(dib7000p_attach);
-
-static struct dvb_frontend_ops dib7000p_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		 .name = "DiBcom 7000PC",
-		 .frequency_min = 44250000,
-		 .frequency_max = 867250000,
-		 .frequency_stepsize = 62500,
-		 .caps = FE_CAN_INVERSION_AUTO |
-		 FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-		 FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-		 FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-		 FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER | FE_CAN_HIERARCHY_AUTO,
-		 },
-
-	.release = dib7000p_release,
-
-	.init = dib7000p_wakeup,
-	.sleep = dib7000p_sleep,
-
-	.set_frontend = dib7000p_set_frontend,
-	.get_tune_settings = dib7000p_fe_get_tune_settings,
-	.get_frontend = dib7000p_get_frontend,
-
-	.read_status = dib7000p_read_status,
-	.read_ber = dib7000p_read_ber,
-	.read_signal_strength = dib7000p_read_signal_strength,
-	.read_snr = dib7000p_read_snr,
-	.read_ucblocks = dib7000p_read_unc_blocks,
-};
-
-MODULE_AUTHOR("Olivier Grenie <ogrenie@dibcom.fr>");
-MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
-MODULE_DESCRIPTION("Driver for the DiBcom 7000PC COFDM demodulator");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/dib7000p.h b/drivers/media/dvb/frontends/dib7000p.h
deleted file mode 100644
index b61b03a..0000000
--- a/drivers/media/dvb/frontends/dib7000p.h
+++ /dev/null
@@ -1,158 +0,0 @@
-#ifndef DIB7000P_H
-#define DIB7000P_H
-
-#include "dibx000_common.h"
-
-struct dib7000p_config {
-	u8 output_mpeg2_in_188_bytes;
-	u8 hostbus_diversity;
-	u8 tuner_is_baseband;
-	int (*update_lna) (struct dvb_frontend *, u16 agc_global);
-
-	u8 agc_config_count;
-	struct dibx000_agc_config *agc;
-	struct dibx000_bandwidth_config *bw;
-
-#define DIB7000P_GPIO_DEFAULT_DIRECTIONS 0xffff
-	u16 gpio_dir;
-#define DIB7000P_GPIO_DEFAULT_VALUES     0x0000
-	u16 gpio_val;
-#define DIB7000P_GPIO_PWM_POS0(v)        ((v & 0xf) << 12)
-#define DIB7000P_GPIO_PWM_POS1(v)        ((v & 0xf) << 8 )
-#define DIB7000P_GPIO_PWM_POS2(v)        ((v & 0xf) << 4 )
-#define DIB7000P_GPIO_PWM_POS3(v)         (v & 0xf)
-#define DIB7000P_GPIO_DEFAULT_PWM_POS    0xffff
-	u16 gpio_pwm_pos;
-
-	u16 pwm_freq_div;
-
-	u8 quartz_direct;
-
-	u8 spur_protect;
-
-	int (*agc_control) (struct dvb_frontend *, u8 before);
-
-	u8 output_mode;
-	u8 disable_sample_and_hold:1;
-
-	u8 enable_current_mirror:1;
-	u16 diversity_delay;
-
-	u8 default_i2c_addr;
-	u8 enMpegOutput:1;
-};
-
-#define DEFAULT_DIB7000P_I2C_ADDRESS 18
-
-#if defined(CONFIG_DVB_DIB7000P) || (defined(CONFIG_DVB_DIB7000P_MODULE) && \
-					defined(MODULE))
-extern struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg);
-extern struct i2c_adapter *dib7000p_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int);
-extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[]);
-extern int dib7000p_set_gpio(struct dvb_frontend *, u8 num, u8 dir, u8 val);
-extern int dib7000p_set_wbd_ref(struct dvb_frontend *, u16 value);
-extern int dib7000pc_detection(struct i2c_adapter *i2c_adap);
-extern int dib7000p_pid_filter(struct dvb_frontend *, u8 id, u16 pid, u8 onoff);
-extern int dib7000p_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff);
-extern int dib7000p_update_pll(struct dvb_frontend *fe, struct dibx000_bandwidth_config *bw);
-extern u32 dib7000p_ctrl_timf(struct dvb_frontend *fe, u8 op, u32 timf);
-extern int dib7090_tuner_sleep(struct dvb_frontend *fe, int onoff);
-extern int dib7090_get_adc_power(struct dvb_frontend *fe);
-extern struct i2c_adapter *dib7090_get_i2c_tuner(struct dvb_frontend *fe);
-extern int dib7090_slave_reset(struct dvb_frontend *fe);
-extern int dib7000p_get_agc_values(struct dvb_frontend *fe,
-		u16 *agc_global, u16 *agc1, u16 *agc2, u16 *wbd);
-#else
-static inline struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-static inline struct i2c_adapter *dib7000p_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface i, int x)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-static inline int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[])
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib7000p_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib7000p_set_wbd_ref(struct dvb_frontend *fe, u16 value)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib7000pc_detection(struct i2c_adapter *i2c_adap)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib7000p_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib7000p_pid_filter_ctrl(struct dvb_frontend *fe, uint8_t onoff)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib7000p_update_pll(struct dvb_frontend *fe, struct dibx000_bandwidth_config *bw)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline u32 dib7000p_ctrl_timf(struct dvb_frontend *fe, u8 op, u32 timf)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return 0;
-}
-
-static inline int dib7090_tuner_sleep(struct dvb_frontend *fe, int onoff)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib7090_get_adc_power(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline struct i2c_adapter *dib7090_get_i2c_tuner(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-static inline int dib7090_slave_reset(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib7000p_get_agc_values(struct dvb_frontend *fe,
-		u16 *agc_global, u16 *agc1, u16 *agc2, u16 *wbd)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-#endif
-
-#endif
diff --git a/drivers/media/dvb/frontends/dib8000.c b/drivers/media/dvb/frontends/dib8000.c
deleted file mode 100644
index 1f3bcb5..0000000
--- a/drivers/media/dvb/frontends/dib8000.c
+++ /dev/null
@@ -1,3560 +0,0 @@
-/*
- * Linux-DVB Driver for DiBcom's DiB8000 chip (ISDB-T).
- *
- * Copyright (C) 2009 DiBcom (http://www.dibcom.fr/)
- *
- * This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License as
- *  published by the Free Software Foundation, version 2.
- */
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-
-#include "dvb_math.h"
-
-#include "dvb_frontend.h"
-
-#include "dib8000.h"
-
-#define LAYER_ALL -1
-#define LAYER_A   1
-#define LAYER_B   2
-#define LAYER_C   3
-
-#define FE_CALLBACK_TIME_NEVER 0xffffffff
-#define MAX_NUMBER_OF_FRONTENDS 6
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
-
-#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB8000: "); printk(args); printk("\n"); } } while (0)
-
-#define FE_STATUS_TUNE_FAILED 0
-
-struct i2c_device {
-	struct i2c_adapter *adap;
-	u8 addr;
-	u8 *i2c_write_buffer;
-	u8 *i2c_read_buffer;
-	struct mutex *i2c_buffer_lock;
-};
-
-struct dib8000_state {
-	struct dib8000_config cfg;
-
-	struct i2c_device i2c;
-
-	struct dibx000_i2c_master i2c_master;
-
-	u16 wbd_ref;
-
-	u8 current_band;
-	u32 current_bandwidth;
-	struct dibx000_agc_config *current_agc;
-	u32 timf;
-	u32 timf_default;
-
-	u8 div_force_off:1;
-	u8 div_state:1;
-	u16 div_sync_wait;
-
-	u8 agc_state;
-	u8 differential_constellation;
-	u8 diversity_onoff;
-
-	s16 ber_monitored_layer;
-	u16 gpio_dir;
-	u16 gpio_val;
-
-	u16 revision;
-	u8 isdbt_cfg_loaded;
-	enum frontend_tune_state tune_state;
-	u32 status;
-
-	struct dvb_frontend *fe[MAX_NUMBER_OF_FRONTENDS];
-
-	/* for the I2C transfer */
-	struct i2c_msg msg[2];
-	u8 i2c_write_buffer[4];
-	u8 i2c_read_buffer[2];
-	struct mutex i2c_buffer_lock;
-	u8 input_mode_mpeg;
-
-	u16 tuner_enable;
-	struct i2c_adapter dib8096p_tuner_adap;
-};
-
-enum dib8000_power_mode {
-	DIB8000_POWER_ALL = 0,
-	DIB8000_POWER_INTERFACE_ONLY,
-};
-
-static u16 dib8000_i2c_read16(struct i2c_device *i2c, u16 reg)
-{
-	u16 ret;
-	struct i2c_msg msg[2] = {
-		{.addr = i2c->addr >> 1, .flags = 0, .len = 2},
-		{.addr = i2c->addr >> 1, .flags = I2C_M_RD, .len = 2},
-	};
-
-	if (mutex_lock_interruptible(i2c->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
-		return 0;
-	}
-
-	msg[0].buf    = i2c->i2c_write_buffer;
-	msg[0].buf[0] = reg >> 8;
-	msg[0].buf[1] = reg & 0xff;
-	msg[1].buf    = i2c->i2c_read_buffer;
-
-	if (i2c_transfer(i2c->adap, msg, 2) != 2)
-		dprintk("i2c read error on %d", reg);
-
-	ret = (msg[1].buf[0] << 8) | msg[1].buf[1];
-	mutex_unlock(i2c->i2c_buffer_lock);
-	return ret;
-}
-
-static u16 dib8000_read_word(struct dib8000_state *state, u16 reg)
-{
-	u16 ret;
-
-	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
-		return 0;
-	}
-
-	state->i2c_write_buffer[0] = reg >> 8;
-	state->i2c_write_buffer[1] = reg & 0xff;
-
-	memset(state->msg, 0, 2 * sizeof(struct i2c_msg));
-	state->msg[0].addr = state->i2c.addr >> 1;
-	state->msg[0].flags = 0;
-	state->msg[0].buf = state->i2c_write_buffer;
-	state->msg[0].len = 2;
-	state->msg[1].addr = state->i2c.addr >> 1;
-	state->msg[1].flags = I2C_M_RD;
-	state->msg[1].buf = state->i2c_read_buffer;
-	state->msg[1].len = 2;
-
-	if (i2c_transfer(state->i2c.adap, state->msg, 2) != 2)
-		dprintk("i2c read error on %d", reg);
-
-	ret = (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1];
-	mutex_unlock(&state->i2c_buffer_lock);
-
-	return ret;
-}
-
-static u32 dib8000_read32(struct dib8000_state *state, u16 reg)
-{
-	u16 rw[2];
-
-	rw[0] = dib8000_read_word(state, reg + 0);
-	rw[1] = dib8000_read_word(state, reg + 1);
-
-	return ((rw[0] << 16) | (rw[1]));
-}
-
-static int dib8000_i2c_write16(struct i2c_device *i2c, u16 reg, u16 val)
-{
-	struct i2c_msg msg = {.addr = i2c->addr >> 1, .flags = 0, .len = 4};
-	int ret = 0;
-
-	if (mutex_lock_interruptible(i2c->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
-		return -EINVAL;
-	}
-
-	msg.buf    = i2c->i2c_write_buffer;
-	msg.buf[0] = (reg >> 8) & 0xff;
-	msg.buf[1] = reg & 0xff;
-	msg.buf[2] = (val >> 8) & 0xff;
-	msg.buf[3] = val & 0xff;
-
-	ret = i2c_transfer(i2c->adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
-	mutex_unlock(i2c->i2c_buffer_lock);
-
-	return ret;
-}
-
-static int dib8000_write_word(struct dib8000_state *state, u16 reg, u16 val)
-{
-	int ret;
-
-	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
-		return -EINVAL;
-	}
-
-	state->i2c_write_buffer[0] = (reg >> 8) & 0xff;
-	state->i2c_write_buffer[1] = reg & 0xff;
-	state->i2c_write_buffer[2] = (val >> 8) & 0xff;
-	state->i2c_write_buffer[3] = val & 0xff;
-
-	memset(&state->msg[0], 0, sizeof(struct i2c_msg));
-	state->msg[0].addr = state->i2c.addr >> 1;
-	state->msg[0].flags = 0;
-	state->msg[0].buf = state->i2c_write_buffer;
-	state->msg[0].len = 4;
-
-	ret = (i2c_transfer(state->i2c.adap, state->msg, 1) != 1 ?
-			-EREMOTEIO : 0);
-	mutex_unlock(&state->i2c_buffer_lock);
-
-	return ret;
-}
-
-static const s16 coeff_2k_sb_1seg_dqpsk[8] = {
-	(769 << 5) | 0x0a, (745 << 5) | 0x03, (595 << 5) | 0x0d, (769 << 5) | 0x0a, (920 << 5) | 0x09, (784 << 5) | 0x02, (519 << 5) | 0x0c,
-		(920 << 5) | 0x09
-};
-
-static const s16 coeff_2k_sb_1seg[8] = {
-	(692 << 5) | 0x0b, (683 << 5) | 0x01, (519 << 5) | 0x09, (692 << 5) | 0x0b, 0 | 0x1f, 0 | 0x1f, 0 | 0x1f, 0 | 0x1f
-};
-
-static const s16 coeff_2k_sb_3seg_0dqpsk_1dqpsk[8] = {
-	(832 << 5) | 0x10, (912 << 5) | 0x05, (900 << 5) | 0x12, (832 << 5) | 0x10, (-931 << 5) | 0x0f, (912 << 5) | 0x04, (807 << 5) | 0x11,
-		(-931 << 5) | 0x0f
-};
-
-static const s16 coeff_2k_sb_3seg_0dqpsk[8] = {
-	(622 << 5) | 0x0c, (941 << 5) | 0x04, (796 << 5) | 0x10, (622 << 5) | 0x0c, (982 << 5) | 0x0c, (519 << 5) | 0x02, (572 << 5) | 0x0e,
-		(982 << 5) | 0x0c
-};
-
-static const s16 coeff_2k_sb_3seg_1dqpsk[8] = {
-	(699 << 5) | 0x14, (607 << 5) | 0x04, (944 << 5) | 0x13, (699 << 5) | 0x14, (-720 << 5) | 0x0d, (640 << 5) | 0x03, (866 << 5) | 0x12,
-		(-720 << 5) | 0x0d
-};
-
-static const s16 coeff_2k_sb_3seg[8] = {
-	(664 << 5) | 0x0c, (925 << 5) | 0x03, (937 << 5) | 0x10, (664 << 5) | 0x0c, (-610 << 5) | 0x0a, (697 << 5) | 0x01, (836 << 5) | 0x0e,
-		(-610 << 5) | 0x0a
-};
-
-static const s16 coeff_4k_sb_1seg_dqpsk[8] = {
-	(-955 << 5) | 0x0e, (687 << 5) | 0x04, (818 << 5) | 0x10, (-955 << 5) | 0x0e, (-922 << 5) | 0x0d, (750 << 5) | 0x03, (665 << 5) | 0x0f,
-		(-922 << 5) | 0x0d
-};
-
-static const s16 coeff_4k_sb_1seg[8] = {
-	(638 << 5) | 0x0d, (683 << 5) | 0x02, (638 << 5) | 0x0d, (638 << 5) | 0x0d, (-655 << 5) | 0x0a, (517 << 5) | 0x00, (698 << 5) | 0x0d,
-		(-655 << 5) | 0x0a
-};
-
-static const s16 coeff_4k_sb_3seg_0dqpsk_1dqpsk[8] = {
-	(-707 << 5) | 0x14, (910 << 5) | 0x06, (889 << 5) | 0x16, (-707 << 5) | 0x14, (-958 << 5) | 0x13, (993 << 5) | 0x05, (523 << 5) | 0x14,
-		(-958 << 5) | 0x13
-};
-
-static const s16 coeff_4k_sb_3seg_0dqpsk[8] = {
-	(-723 << 5) | 0x13, (910 << 5) | 0x05, (777 << 5) | 0x14, (-723 << 5) | 0x13, (-568 << 5) | 0x0f, (547 << 5) | 0x03, (696 << 5) | 0x12,
-		(-568 << 5) | 0x0f
-};
-
-static const s16 coeff_4k_sb_3seg_1dqpsk[8] = {
-	(-940 << 5) | 0x15, (607 << 5) | 0x05, (915 << 5) | 0x16, (-940 << 5) | 0x15, (-848 << 5) | 0x13, (683 << 5) | 0x04, (543 << 5) | 0x14,
-		(-848 << 5) | 0x13
-};
-
-static const s16 coeff_4k_sb_3seg[8] = {
-	(612 << 5) | 0x12, (910 << 5) | 0x04, (864 << 5) | 0x14, (612 << 5) | 0x12, (-869 << 5) | 0x13, (683 << 5) | 0x02, (869 << 5) | 0x12,
-		(-869 << 5) | 0x13
-};
-
-static const s16 coeff_8k_sb_1seg_dqpsk[8] = {
-	(-835 << 5) | 0x12, (684 << 5) | 0x05, (735 << 5) | 0x14, (-835 << 5) | 0x12, (-598 << 5) | 0x10, (781 << 5) | 0x04, (739 << 5) | 0x13,
-		(-598 << 5) | 0x10
-};
-
-static const s16 coeff_8k_sb_1seg[8] = {
-	(673 << 5) | 0x0f, (683 << 5) | 0x03, (808 << 5) | 0x12, (673 << 5) | 0x0f, (585 << 5) | 0x0f, (512 << 5) | 0x01, (780 << 5) | 0x0f,
-		(585 << 5) | 0x0f
-};
-
-static const s16 coeff_8k_sb_3seg_0dqpsk_1dqpsk[8] = {
-	(863 << 5) | 0x17, (930 << 5) | 0x07, (878 << 5) | 0x19, (863 << 5) | 0x17, (0 << 5) | 0x14, (521 << 5) | 0x05, (980 << 5) | 0x18,
-		(0 << 5) | 0x14
-};
-
-static const s16 coeff_8k_sb_3seg_0dqpsk[8] = {
-	(-924 << 5) | 0x17, (910 << 5) | 0x06, (774 << 5) | 0x17, (-924 << 5) | 0x17, (-877 << 5) | 0x15, (565 << 5) | 0x04, (553 << 5) | 0x15,
-		(-877 << 5) | 0x15
-};
-
-static const s16 coeff_8k_sb_3seg_1dqpsk[8] = {
-	(-921 << 5) | 0x19, (607 << 5) | 0x06, (881 << 5) | 0x19, (-921 << 5) | 0x19, (-921 << 5) | 0x14, (713 << 5) | 0x05, (1018 << 5) | 0x18,
-		(-921 << 5) | 0x14
-};
-
-static const s16 coeff_8k_sb_3seg[8] = {
-	(514 << 5) | 0x14, (910 << 5) | 0x05, (861 << 5) | 0x17, (514 << 5) | 0x14, (690 << 5) | 0x14, (683 << 5) | 0x03, (662 << 5) | 0x15,
-		(690 << 5) | 0x14
-};
-
-static const s16 ana_fe_coeff_3seg[24] = {
-	81, 80, 78, 74, 68, 61, 54, 45, 37, 28, 19, 11, 4, 1022, 1017, 1013, 1010, 1008, 1008, 1008, 1008, 1010, 1014, 1017
-};
-
-static const s16 ana_fe_coeff_1seg[24] = {
-	249, 226, 164, 82, 5, 981, 970, 988, 1018, 20, 31, 26, 8, 1012, 1000, 1018, 1012, 8, 15, 14, 9, 3, 1017, 1003
-};
-
-static const s16 ana_fe_coeff_13seg[24] = {
-	396, 305, 105, -51, -77, -12, 41, 31, -11, -30, -11, 14, 15, -2, -13, -7, 5, 8, 1, -6, -7, -3, 0, 1
-};
-
-static u16 fft_to_mode(struct dib8000_state *state)
-{
-	u16 mode;
-	switch (state->fe[0]->dtv_property_cache.transmission_mode) {
-	case TRANSMISSION_MODE_2K:
-		mode = 1;
-		break;
-	case TRANSMISSION_MODE_4K:
-		mode = 2;
-		break;
-	default:
-	case TRANSMISSION_MODE_AUTO:
-	case TRANSMISSION_MODE_8K:
-		mode = 3;
-		break;
-	}
-	return mode;
-}
-
-static void dib8000_set_acquisition_mode(struct dib8000_state *state)
-{
-	u16 nud = dib8000_read_word(state, 298);
-	nud |= (1 << 3) | (1 << 0);
-	dprintk("acquisition mode activated");
-	dib8000_write_word(state, 298, nud);
-}
-static int dib8000_set_output_mode(struct dvb_frontend *fe, int mode)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-
-	u16 outreg, fifo_threshold, smo_mode, sram = 0x0205;	/* by default SDRAM deintlv is enabled */
-
-	outreg = 0;
-	fifo_threshold = 1792;
-	smo_mode = (dib8000_read_word(state, 299) & 0x0050) | (1 << 1);
-
-	dprintk("-I-	Setting output mode for demod %p to %d",
-			&state->fe[0], mode);
-
-	switch (mode) {
-	case OUTMODE_MPEG2_PAR_GATED_CLK:	// STBs with parallel gated clock
-		outreg = (1 << 10);	/* 0x0400 */
-		break;
-	case OUTMODE_MPEG2_PAR_CONT_CLK:	// STBs with parallel continues clock
-		outreg = (1 << 10) | (1 << 6);	/* 0x0440 */
-		break;
-	case OUTMODE_MPEG2_SERIAL:	// STBs with serial input
-		outreg = (1 << 10) | (2 << 6) | (0 << 1);	/* 0x0482 */
-		break;
-	case OUTMODE_DIVERSITY:
-		if (state->cfg.hostbus_diversity) {
-			outreg = (1 << 10) | (4 << 6);	/* 0x0500 */
-			sram &= 0xfdff;
-		} else
-			sram |= 0x0c00;
-		break;
-	case OUTMODE_MPEG2_FIFO:	// e.g. USB feeding
-		smo_mode |= (3 << 1);
-		fifo_threshold = 512;
-		outreg = (1 << 10) | (5 << 6);
-		break;
-	case OUTMODE_HIGH_Z:	// disable
-		outreg = 0;
-		break;
-
-	case OUTMODE_ANALOG_ADC:
-		outreg = (1 << 10) | (3 << 6);
-		dib8000_set_acquisition_mode(state);
-		break;
-
-	default:
-		dprintk("Unhandled output_mode passed to be set for demod %p",
-				&state->fe[0]);
-		return -EINVAL;
-	}
-
-	if (state->cfg.output_mpeg2_in_188_bytes)
-		smo_mode |= (1 << 5);
-
-	dib8000_write_word(state, 299, smo_mode);
-	dib8000_write_word(state, 300, fifo_threshold);	/* synchronous fread */
-	dib8000_write_word(state, 1286, outreg);
-	dib8000_write_word(state, 1291, sram);
-
-	return 0;
-}
-
-static int dib8000_set_diversity_in(struct dvb_frontend *fe, int onoff)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	u16 sync_wait = dib8000_read_word(state, 273) & 0xfff0;
-
-	if (!state->differential_constellation) {
-		dib8000_write_word(state, 272, 1 << 9);	//dvsy_off_lmod4 = 1
-		dib8000_write_word(state, 273, sync_wait | (1 << 2) | 2);	// sync_enable = 1; comb_mode = 2
-	} else {
-		dib8000_write_word(state, 272, 0);	//dvsy_off_lmod4 = 0
-		dib8000_write_word(state, 273, sync_wait);	// sync_enable = 0; comb_mode = 0
-	}
-	state->diversity_onoff = onoff;
-
-	switch (onoff) {
-	case 0:		/* only use the internal way - not the diversity input */
-		dib8000_write_word(state, 270, 1);
-		dib8000_write_word(state, 271, 0);
-		break;
-	case 1:		/* both ways */
-		dib8000_write_word(state, 270, 6);
-		dib8000_write_word(state, 271, 6);
-		break;
-	case 2:		/* only the diversity input */
-		dib8000_write_word(state, 270, 0);
-		dib8000_write_word(state, 271, 1);
-		break;
-	}
-	return 0;
-}
-
-static void dib8000_set_power_mode(struct dib8000_state *state, enum dib8000_power_mode mode)
-{
-	/* by default everything is going to be powered off */
-	u16 reg_774 = 0x3fff, reg_775 = 0xffff, reg_776 = 0xffff,
-		reg_900 = (dib8000_read_word(state, 900) & 0xfffc) | 0x3,
-		reg_1280;
-
-	if (state->revision != 0x8090)
-		reg_1280 = (dib8000_read_word(state, 1280) & 0x00ff) | 0xff00;
-	else
-		reg_1280 = (dib8000_read_word(state, 1280) & 0x707f) | 0x8f80;
-
-	/* now, depending on the requested mode, we power on */
-	switch (mode) {
-		/* power up everything in the demod */
-	case DIB8000_POWER_ALL:
-		reg_774 = 0x0000;
-		reg_775 = 0x0000;
-		reg_776 = 0x0000;
-		reg_900 &= 0xfffc;
-		if (state->revision != 0x8090)
-			reg_1280 &= 0x00ff;
-		else
-			reg_1280 &= 0x707f;
-		break;
-	case DIB8000_POWER_INTERFACE_ONLY:
-		if (state->revision != 0x8090)
-			reg_1280 &= 0x00ff;
-		else
-			reg_1280 &= 0xfa7b;
-		break;
-	}
-
-	dprintk("powermode : 774 : %x ; 775 : %x; 776 : %x ; 900 : %x; 1280 : %x", reg_774, reg_775, reg_776, reg_900, reg_1280);
-	dib8000_write_word(state, 774, reg_774);
-	dib8000_write_word(state, 775, reg_775);
-	dib8000_write_word(state, 776, reg_776);
-	dib8000_write_word(state, 900, reg_900);
-	dib8000_write_word(state, 1280, reg_1280);
-}
-
-static int dib8000_init_sdram(struct dib8000_state *state)
-{
-	u16 reg = 0;
-	dprintk("Init sdram");
-
-	reg = dib8000_read_word(state, 274)&0xfff0;
-	/* P_dintlv_delay_ram = 7 because of MobileSdram */
-	dib8000_write_word(state, 274, reg | 0x7);
-
-	dib8000_write_word(state, 1803, (7<<2));
-
-	reg = dib8000_read_word(state, 1280);
-	/* force restart P_restart_sdram */
-	dib8000_write_word(state, 1280,  reg | (1<<2));
-
-	/* release restart P_restart_sdram */
-	dib8000_write_word(state, 1280,  reg);
-
-	return 0;
-}
-
-static int dib8000_set_adc_state(struct dib8000_state *state, enum dibx000_adc_states no)
-{
-	int ret = 0;
-	u16 reg, reg_907 = dib8000_read_word(state, 907);
-	u16 reg_908 = dib8000_read_word(state, 908);
-
-	switch (no) {
-	case DIBX000_SLOW_ADC_ON:
-		if (state->revision != 0x8090) {
-			reg_908 |= (1 << 1) | (1 << 0);
-			ret |= dib8000_write_word(state, 908, reg_908);
-			reg_908 &= ~(1 << 1);
-		} else {
-			reg = dib8000_read_word(state, 1925);
-			/* en_slowAdc = 1 & reset_sladc = 1 */
-			dib8000_write_word(state, 1925, reg |
-					(1<<4) | (1<<2));
-
-			/* read acces to make it works... strange ... */
-			reg = dib8000_read_word(state, 1925);
-			msleep(20);
-			/* en_slowAdc = 1 & reset_sladc = 0 */
-			dib8000_write_word(state, 1925, reg & ~(1<<4));
-
-			reg = dib8000_read_word(state, 921) & ~((0x3 << 14)
-					| (0x3 << 12));
-			/* ref = Vin1 => Vbg ; sel = Vin0 or Vin3 ;
-			   (Vin2 = Vcm) */
-			dib8000_write_word(state, 921, reg | (1 << 14)
-					| (3 << 12));
-		}
-		break;
-
-	case DIBX000_SLOW_ADC_OFF:
-		if (state->revision == 0x8090) {
-			reg = dib8000_read_word(state, 1925);
-			/* reset_sladc = 1 en_slowAdc = 0 */
-			dib8000_write_word(state, 1925,
-					(reg & ~(1<<2)) | (1<<4));
-		}
-		reg_908 |= (1 << 1) | (1 << 0);
-		break;
-
-	case DIBX000_ADC_ON:
-		reg_907 &= 0x0fff;
-		reg_908 &= 0x0003;
-		break;
-
-	case DIBX000_ADC_OFF:	// leave the VBG voltage on
-		reg_907 |= (1 << 14) | (1 << 13) | (1 << 12);
-		reg_908 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2);
-		break;
-
-	case DIBX000_VBG_ENABLE:
-		reg_907 &= ~(1 << 15);
-		break;
-
-	case DIBX000_VBG_DISABLE:
-		reg_907 |= (1 << 15);
-		break;
-
-	default:
-		break;
-	}
-
-	ret |= dib8000_write_word(state, 907, reg_907);
-	ret |= dib8000_write_word(state, 908, reg_908);
-
-	return ret;
-}
-
-static int dib8000_set_bandwidth(struct dvb_frontend *fe, u32 bw)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	u32 timf;
-
-	if (bw == 0)
-		bw = 6000;
-
-	if (state->timf == 0) {
-		dprintk("using default timf");
-		timf = state->timf_default;
-	} else {
-		dprintk("using updated timf");
-		timf = state->timf;
-	}
-
-	dib8000_write_word(state, 29, (u16) ((timf >> 16) & 0xffff));
-	dib8000_write_word(state, 30, (u16) ((timf) & 0xffff));
-
-	return 0;
-}
-
-static int dib8000_sad_calib(struct dib8000_state *state)
-{
-	if (state->revision == 0x8090) {
-		dprintk("%s: the sad calibration is not needed for the dib8096P",
-				__func__);
-		return 0;
-	}
-	/* internal */
-	dib8000_write_word(state, 923, (0 << 1) | (0 << 0));
-	dib8000_write_word(state, 924, 776);	// 0.625*3.3 / 4096
-
-	/* do the calibration */
-	dib8000_write_word(state, 923, (1 << 0));
-	dib8000_write_word(state, 923, (0 << 0));
-
-	msleep(1);
-	return 0;
-}
-
-int dib8000_set_wbd_ref(struct dvb_frontend *fe, u16 value)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	if (value > 4095)
-		value = 4095;
-	state->wbd_ref = value;
-	return dib8000_write_word(state, 106, value);
-}
-
-EXPORT_SYMBOL(dib8000_set_wbd_ref);
-static void dib8000_reset_pll_common(struct dib8000_state *state, const struct dibx000_bandwidth_config *bw)
-{
-	dprintk("ifreq: %d %x, inversion: %d", bw->ifreq, bw->ifreq, bw->ifreq >> 25);
-	if (state->revision != 0x8090) {
-		dib8000_write_word(state, 23,
-				(u16) (((bw->internal * 1000) >> 16) & 0xffff));
-		dib8000_write_word(state, 24,
-				(u16) ((bw->internal * 1000) & 0xffff));
-	} else {
-		dib8000_write_word(state, 23, (u16) (((bw->internal / 2 * 1000) >> 16) & 0xffff));
-		dib8000_write_word(state, 24,
-				(u16) ((bw->internal  / 2 * 1000) & 0xffff));
-	}
-	dib8000_write_word(state, 27, (u16) ((bw->ifreq >> 16) & 0x01ff));
-	dib8000_write_word(state, 28, (u16) (bw->ifreq & 0xffff));
-	dib8000_write_word(state, 26, (u16) ((bw->ifreq >> 25) & 0x0003));
-
-	if (state->revision != 0x8090)
-		dib8000_write_word(state, 922, bw->sad_cfg);
-}
-
-static void dib8000_reset_pll(struct dib8000_state *state)
-{
-	const struct dibx000_bandwidth_config *pll = state->cfg.pll;
-	u16 clk_cfg1, reg;
-
-	if (state->revision != 0x8090) {
-		dib8000_write_word(state, 901,
-				(pll->pll_prediv << 8) | (pll->pll_ratio << 0));
-
-		clk_cfg1 = (1 << 10) | (0 << 9) | (pll->IO_CLK_en_core << 8) |
-			(pll->bypclk_div << 5) | (pll->enable_refdiv << 4) |
-			(1 << 3) | (pll->pll_range << 1) |
-			(pll->pll_reset << 0);
-
-		dib8000_write_word(state, 902, clk_cfg1);
-		clk_cfg1 = (clk_cfg1 & 0xfff7) | (pll->pll_bypass << 3);
-		dib8000_write_word(state, 902, clk_cfg1);
-
-		dprintk("clk_cfg1: 0x%04x", clk_cfg1);
-
-		/* smpl_cfg: P_refclksel=2, P_ensmplsel=1 nodivsmpl=1 */
-		if (state->cfg.pll->ADClkSrc == 0)
-			dib8000_write_word(state, 904,
-					(0 << 15) | (0 << 12) | (0 << 10) |
-					(pll->modulo << 8) |
-					(pll->ADClkSrc << 7) | (0 << 1));
-		else if (state->cfg.refclksel != 0)
-			dib8000_write_word(state, 904, (0 << 15) | (1 << 12) |
-					((state->cfg.refclksel & 0x3) << 10) |
-					(pll->modulo << 8) |
-					(pll->ADClkSrc << 7) | (0 << 1));
-		else
-			dib8000_write_word(state, 904, (0 << 15) | (1 << 12) |
-					(3 << 10) | (pll->modulo << 8) |
-					(pll->ADClkSrc << 7) | (0 << 1));
-	} else {
-		dib8000_write_word(state, 1856, (!pll->pll_reset<<13) |
-				(pll->pll_range<<12) | (pll->pll_ratio<<6) |
-				(pll->pll_prediv));
-
-		reg = dib8000_read_word(state, 1857);
-		dib8000_write_word(state, 1857, reg|(!pll->pll_bypass<<15));
-
-		reg = dib8000_read_word(state, 1858); /* Force clk out pll /2 */
-		dib8000_write_word(state, 1858, reg | 1);
-
-		dib8000_write_word(state, 904, (pll->modulo << 8));
-	}
-
-	dib8000_reset_pll_common(state, pll);
-}
-
-int dib8000_update_pll(struct dvb_frontend *fe,
-		struct dibx000_bandwidth_config *pll)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	u16 reg_1857, reg_1856 = dib8000_read_word(state, 1856);
-	u8 loopdiv, prediv;
-	u32 internal, xtal;
-
-	/* get back old values */
-	prediv = reg_1856 & 0x3f;
-	loopdiv = (reg_1856 >> 6) & 0x3f;
-
-	if ((pll != NULL) && (pll->pll_prediv != prediv ||
-				pll->pll_ratio != loopdiv)) {
-		dprintk("Updating pll (prediv: old =  %d new = %d ; loopdiv : old = %d new = %d)", prediv, pll->pll_prediv, loopdiv, pll->pll_ratio);
-		reg_1856 &= 0xf000;
-		reg_1857 = dib8000_read_word(state, 1857);
-		/* disable PLL */
-		dib8000_write_word(state, 1857, reg_1857 & ~(1 << 15));
-
-		dib8000_write_word(state, 1856, reg_1856 |
-				((pll->pll_ratio & 0x3f) << 6) |
-				(pll->pll_prediv & 0x3f));
-
-		/* write new system clk into P_sec_len */
-		internal = dib8000_read32(state, 23) / 1000;
-		dprintk("Old Internal = %d", internal);
-		xtal = 2 * (internal / loopdiv) * prediv;
-		internal = 1000 * (xtal/pll->pll_prediv) * pll->pll_ratio;
-		dprintk("Xtal = %d , New Fmem = %d New Fdemod = %d, New Fsampling = %d", xtal, internal/1000, internal/2000, internal/8000);
-		dprintk("New Internal = %d", internal);
-
-		dib8000_write_word(state, 23,
-				(u16) (((internal / 2) >> 16) & 0xffff));
-		dib8000_write_word(state, 24, (u16) ((internal / 2) & 0xffff));
-		/* enable PLL */
-		dib8000_write_word(state, 1857, reg_1857 | (1 << 15));
-
-		while (((dib8000_read_word(state, 1856)>>15)&0x1) != 1)
-			dprintk("Waiting for PLL to lock");
-
-		/* verify */
-		reg_1856 = dib8000_read_word(state, 1856);
-		dprintk("PLL Updated with prediv = %d and loopdiv = %d",
-				reg_1856&0x3f, (reg_1856>>6)&0x3f);
-
-		return 0;
-	}
-	return -EINVAL;
-}
-EXPORT_SYMBOL(dib8000_update_pll);
-
-
-static int dib8000_reset_gpio(struct dib8000_state *st)
-{
-	/* reset the GPIOs */
-	dib8000_write_word(st, 1029, st->cfg.gpio_dir);
-	dib8000_write_word(st, 1030, st->cfg.gpio_val);
-
-	/* TODO 782 is P_gpio_od */
-
-	dib8000_write_word(st, 1032, st->cfg.gpio_pwm_pos);
-
-	dib8000_write_word(st, 1037, st->cfg.pwm_freq_div);
-	return 0;
-}
-
-static int dib8000_cfg_gpio(struct dib8000_state *st, u8 num, u8 dir, u8 val)
-{
-	st->cfg.gpio_dir = dib8000_read_word(st, 1029);
-	st->cfg.gpio_dir &= ~(1 << num);	/* reset the direction bit */
-	st->cfg.gpio_dir |= (dir & 0x1) << num;	/* set the new direction */
-	dib8000_write_word(st, 1029, st->cfg.gpio_dir);
-
-	st->cfg.gpio_val = dib8000_read_word(st, 1030);
-	st->cfg.gpio_val &= ~(1 << num);	/* reset the direction bit */
-	st->cfg.gpio_val |= (val & 0x01) << num;	/* set the new value */
-	dib8000_write_word(st, 1030, st->cfg.gpio_val);
-
-	dprintk("gpio dir: %x: gpio val: %x", st->cfg.gpio_dir, st->cfg.gpio_val);
-
-	return 0;
-}
-
-int dib8000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	return dib8000_cfg_gpio(state, num, dir, val);
-}
-
-EXPORT_SYMBOL(dib8000_set_gpio);
-static const u16 dib8000_defaults[] = {
-	/* auto search configuration - lock0 by default waiting
-	 * for cpil_lock; lock1 cpil_lock; lock2 tmcc_sync_lock */
-	3, 7,
-	0x0004,
-	0x0400,
-	0x0814,
-
-	12, 11,
-	0x001b,
-	0x7740,
-	0x005b,
-	0x8d80,
-	0x01c9,
-	0xc380,
-	0x0000,
-	0x0080,
-	0x0000,
-	0x0090,
-	0x0001,
-	0xd4c0,
-
-	/*1, 32,
-		0x6680 // P_corm_thres Lock algorithms configuration */
-
-	11, 80,			/* set ADC level to -16 */
-	(1 << 13) - 825 - 117,
-	(1 << 13) - 837 - 117,
-	(1 << 13) - 811 - 117,
-	(1 << 13) - 766 - 117,
-	(1 << 13) - 737 - 117,
-	(1 << 13) - 693 - 117,
-	(1 << 13) - 648 - 117,
-	(1 << 13) - 619 - 117,
-	(1 << 13) - 575 - 117,
-	(1 << 13) - 531 - 117,
-	(1 << 13) - 501 - 117,
-
-	4, 108,
-	0,
-	0,
-	0,
-	0,
-
-	1, 175,
-	0x0410,
-	1, 179,
-	8192,			// P_fft_nb_to_cut
-
-	6, 181,
-	0x2800,			// P_coff_corthres_ ( 2k 4k 8k ) 0x2800
-	0x2800,
-	0x2800,
-	0x2800,			// P_coff_cpilthres_ ( 2k 4k 8k ) 0x2800
-	0x2800,
-	0x2800,
-
-	2, 193,
-	0x0666,			// P_pha3_thres
-	0x0000,			// P_cti_use_cpe, P_cti_use_prog
-
-	2, 205,
-	0x200f,			// P_cspu_regul, P_cspu_win_cut
-	0x000f,			// P_des_shift_work
-
-	5, 215,
-	0x023d,			// P_adp_regul_cnt
-	0x00a4,			// P_adp_noise_cnt
-	0x00a4,			// P_adp_regul_ext
-	0x7ff0,			// P_adp_noise_ext
-	0x3ccc,			// P_adp_fil
-
-	1, 230,
-	0x0000,			// P_2d_byp_ti_num
-
-	1, 263,
-	0x800,			//P_equal_thres_wgn
-
-	1, 268,
-	(2 << 9) | 39,		// P_equal_ctrl_synchro, P_equal_speedmode
-
-	1, 270,
-	0x0001,			// P_div_lock0_wait
-	1, 285,
-	0x0020,			//p_fec_
-	1, 299,
-	0x0062,			/* P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard */
-
-	1, 338,
-	(1 << 12) |		// P_ctrl_corm_thres4pre_freq_inh=1
-		(1 << 10) |
-		(0 << 9) |		/* P_ctrl_pre_freq_inh=0 */
-		(3 << 5) |		/* P_ctrl_pre_freq_step=3 */
-		(1 << 0),		/* P_pre_freq_win_len=1 */
-
-	0,
-};
-
-static u16 dib8000_identify(struct i2c_device *client)
-{
-	u16 value;
-
-	//because of glitches sometimes
-	value = dib8000_i2c_read16(client, 896);
-
-	if ((value = dib8000_i2c_read16(client, 896)) != 0x01b3) {
-		dprintk("wrong Vendor ID (read=0x%x)", value);
-		return 0;
-	}
-
-	value = dib8000_i2c_read16(client, 897);
-	if (value != 0x8000 && value != 0x8001 &&
-			value != 0x8002 && value != 0x8090) {
-		dprintk("wrong Device ID (%x)", value);
-		return 0;
-	}
-
-	switch (value) {
-	case 0x8000:
-		dprintk("found DiB8000A");
-		break;
-	case 0x8001:
-		dprintk("found DiB8000B");
-		break;
-	case 0x8002:
-		dprintk("found DiB8000C");
-		break;
-	case 0x8090:
-		dprintk("found DiB8096P");
-		break;
-	}
-	return value;
-}
-
-static int dib8000_reset(struct dvb_frontend *fe)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-
-	if ((state->revision = dib8000_identify(&state->i2c)) == 0)
-		return -EINVAL;
-
-	/* sram lead in, rdy */
-	if (state->revision != 0x8090)
-		dib8000_write_word(state, 1287, 0x0003);
-
-	if (state->revision == 0x8000)
-		dprintk("error : dib8000 MA not supported");
-
-	dibx000_reset_i2c_master(&state->i2c_master);
-
-	dib8000_set_power_mode(state, DIB8000_POWER_ALL);
-
-	/* always leave the VBG voltage on - it consumes almost nothing but takes a long time to start */
-	dib8000_set_adc_state(state, DIBX000_VBG_ENABLE);
-
-	/* restart all parts */
-	dib8000_write_word(state, 770, 0xffff);
-	dib8000_write_word(state, 771, 0xffff);
-	dib8000_write_word(state, 772, 0xfffc);
-	if (state->revision == 0x8090)
-		dib8000_write_word(state, 1280, 0x0045);
-	else
-		dib8000_write_word(state, 1280, 0x004d);
-	dib8000_write_word(state, 1281, 0x000c);
-
-	dib8000_write_word(state, 770, 0x0000);
-	dib8000_write_word(state, 771, 0x0000);
-	dib8000_write_word(state, 772, 0x0000);
-	dib8000_write_word(state, 898, 0x0004);	// sad
-	dib8000_write_word(state, 1280, 0x0000);
-	dib8000_write_word(state, 1281, 0x0000);
-
-	/* drives */
-	if (state->revision != 0x8090) {
-		if (state->cfg.drives)
-			dib8000_write_word(state, 906, state->cfg.drives);
-		else {
-			dprintk("using standard PAD-drive-settings, please adjust settings in config-struct to be optimal.");
-			/* min drive SDRAM - not optimal - adjust */
-			dib8000_write_word(state, 906, 0x2d98);
-		}
-	}
-
-	dib8000_reset_pll(state);
-	if (state->revision != 0x8090)
-		dib8000_write_word(state, 898, 0x0004);
-
-	if (dib8000_reset_gpio(state) != 0)
-		dprintk("GPIO reset was not successful.");
-
-	if ((state->revision != 0x8090) &&
-			(dib8000_set_output_mode(fe, OUTMODE_HIGH_Z) != 0))
-		dprintk("OUTPUT_MODE could not be resetted.");
-
-	state->current_agc = NULL;
-
-	// P_iqc_alpha_pha, P_iqc_alpha_amp, P_iqc_dcc_alpha, ...
-	/* P_iqc_ca2 = 0; P_iqc_impnc_on = 0; P_iqc_mode = 0; */
-	if (state->cfg.pll->ifreq == 0)
-		dib8000_write_word(state, 40, 0x0755);	/* P_iqc_corr_inh = 0 enable IQcorr block */
-	else
-		dib8000_write_word(state, 40, 0x1f55);	/* P_iqc_corr_inh = 1 disable IQcorr block */
-
-	{
-		u16 l = 0, r;
-		const u16 *n;
-		n = dib8000_defaults;
-		l = *n++;
-		while (l) {
-			r = *n++;
-			do {
-				dib8000_write_word(state, r, *n++);
-				r++;
-			} while (--l);
-			l = *n++;
-		}
-	}
-	if (state->revision != 0x8090)
-		dib8000_write_word(state, 903, (0 << 4) | 2);
-	state->isdbt_cfg_loaded = 0;
-
-	//div_cfg override for special configs
-	if (state->cfg.div_cfg != 0)
-		dib8000_write_word(state, 903, state->cfg.div_cfg);
-
-	/* unforce divstr regardless whether i2c enumeration was done or not */
-	dib8000_write_word(state, 1285, dib8000_read_word(state, 1285) & ~(1 << 1));
-
-	dib8000_set_bandwidth(fe, 6000);
-
-	dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON);
-	if (state->revision != 0x8090) {
-		dib8000_sad_calib(state);
-		dib8000_set_adc_state(state, DIBX000_SLOW_ADC_OFF);
-	}
-
-	dib8000_set_power_mode(state, DIB8000_POWER_INTERFACE_ONLY);
-
-	return 0;
-}
-
-static void dib8000_restart_agc(struct dib8000_state *state)
-{
-	// P_restart_iqc & P_restart_agc
-	dib8000_write_word(state, 770, 0x0a00);
-	dib8000_write_word(state, 770, 0x0000);
-}
-
-static int dib8000_update_lna(struct dib8000_state *state)
-{
-	u16 dyn_gain;
-
-	if (state->cfg.update_lna) {
-		// read dyn_gain here (because it is demod-dependent and not tuner)
-		dyn_gain = dib8000_read_word(state, 390);
-
-		if (state->cfg.update_lna(state->fe[0], dyn_gain)) {
-			dib8000_restart_agc(state);
-			return 1;
-		}
-	}
-	return 0;
-}
-
-static int dib8000_set_agc_config(struct dib8000_state *state, u8 band)
-{
-	struct dibx000_agc_config *agc = NULL;
-	int i;
-	u16 reg;
-
-	if (state->current_band == band && state->current_agc != NULL)
-		return 0;
-	state->current_band = band;
-
-	for (i = 0; i < state->cfg.agc_config_count; i++)
-		if (state->cfg.agc[i].band_caps & band) {
-			agc = &state->cfg.agc[i];
-			break;
-		}
-
-	if (agc == NULL) {
-		dprintk("no valid AGC configuration found for band 0x%02x", band);
-		return -EINVAL;
-	}
-
-	state->current_agc = agc;
-
-	/* AGC */
-	dib8000_write_word(state, 76, agc->setup);
-	dib8000_write_word(state, 77, agc->inv_gain);
-	dib8000_write_word(state, 78, agc->time_stabiliz);
-	dib8000_write_word(state, 101, (agc->alpha_level << 12) | agc->thlock);
-
-	// Demod AGC loop configuration
-	dib8000_write_word(state, 102, (agc->alpha_mant << 5) | agc->alpha_exp);
-	dib8000_write_word(state, 103, (agc->beta_mant << 6) | agc->beta_exp);
-
-	dprintk("WBD: ref: %d, sel: %d, active: %d, alpha: %d",
-		state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel);
-
-	/* AGC continued */
-	if (state->wbd_ref != 0)
-		dib8000_write_word(state, 106, state->wbd_ref);
-	else			// use default
-		dib8000_write_word(state, 106, agc->wbd_ref);
-
-	if (state->revision == 0x8090) {
-		reg = dib8000_read_word(state, 922) & (0x3 << 2);
-		dib8000_write_word(state, 922, reg | (agc->wbd_sel << 2));
-	}
-
-	dib8000_write_word(state, 107, (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8));
-	dib8000_write_word(state, 108, agc->agc1_max);
-	dib8000_write_word(state, 109, agc->agc1_min);
-	dib8000_write_word(state, 110, agc->agc2_max);
-	dib8000_write_word(state, 111, agc->agc2_min);
-	dib8000_write_word(state, 112, (agc->agc1_pt1 << 8) | agc->agc1_pt2);
-	dib8000_write_word(state, 113, (agc->agc1_slope1 << 8) | agc->agc1_slope2);
-	dib8000_write_word(state, 114, (agc->agc2_pt1 << 8) | agc->agc2_pt2);
-	dib8000_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
-
-	dib8000_write_word(state, 75, agc->agc1_pt3);
-	if (state->revision != 0x8090)
-		dib8000_write_word(state, 923,
-				(dib8000_read_word(state, 923) & 0xffe3) |
-				(agc->wbd_inv << 4) | (agc->wbd_sel << 2));
-
-	return 0;
-}
-
-void dib8000_pwm_agc_reset(struct dvb_frontend *fe)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	dib8000_set_adc_state(state, DIBX000_ADC_ON);
-	dib8000_set_agc_config(state, (unsigned char)(BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000)));
-}
-EXPORT_SYMBOL(dib8000_pwm_agc_reset);
-
-static int dib8000_agc_soft_split(struct dib8000_state *state)
-{
-	u16 agc, split_offset;
-
-	if (!state->current_agc || !state->current_agc->perform_agc_softsplit || state->current_agc->split.max == 0)
-		return FE_CALLBACK_TIME_NEVER;
-
-	// n_agc_global
-	agc = dib8000_read_word(state, 390);
-
-	if (agc > state->current_agc->split.min_thres)
-		split_offset = state->current_agc->split.min;
-	else if (agc < state->current_agc->split.max_thres)
-		split_offset = state->current_agc->split.max;
-	else
-		split_offset = state->current_agc->split.max *
-			(agc - state->current_agc->split.min_thres) /
-			(state->current_agc->split.max_thres - state->current_agc->split.min_thres);
-
-	dprintk("AGC split_offset: %d", split_offset);
-
-	// P_agc_force_split and P_agc_split_offset
-	dib8000_write_word(state, 107, (dib8000_read_word(state, 107) & 0xff00) | split_offset);
-	return 5000;
-}
-
-static int dib8000_agc_startup(struct dvb_frontend *fe)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	enum frontend_tune_state *tune_state = &state->tune_state;
-	int ret = 0;
-	u16 reg, upd_demod_gain_period = 0x8000;
-
-	switch (*tune_state) {
-	case CT_AGC_START:
-		// set power-up level: interf+analog+AGC
-
-		if (state->revision != 0x8090)
-			dib8000_set_adc_state(state, DIBX000_ADC_ON);
-		else {
-			dib8000_set_power_mode(state, DIB8000_POWER_ALL);
-
-			reg = dib8000_read_word(state, 1947)&0xff00;
-			dib8000_write_word(state, 1946,
-					upd_demod_gain_period & 0xFFFF);
-			/* bit 14 = enDemodGain */
-			dib8000_write_word(state, 1947, reg | (1<<14) |
-					((upd_demod_gain_period >> 16) & 0xFF));
-
-			/* enable adc i & q */
-			reg = dib8000_read_word(state, 1920);
-			dib8000_write_word(state, 1920, (reg | 0x3) &
-					(~(1 << 7)));
-		}
-
-		if (dib8000_set_agc_config(state, (unsigned char)(BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000))) != 0) {
-			*tune_state = CT_AGC_STOP;
-			state->status = FE_STATUS_TUNE_FAILED;
-			break;
-		}
-
-		ret = 70;
-		*tune_state = CT_AGC_STEP_0;
-		break;
-
-	case CT_AGC_STEP_0:
-		//AGC initialization
-		if (state->cfg.agc_control)
-			state->cfg.agc_control(fe, 1);
-
-		dib8000_restart_agc(state);
-
-		// wait AGC rough lock time
-		ret = 50;
-		*tune_state = CT_AGC_STEP_1;
-		break;
-
-	case CT_AGC_STEP_1:
-		// wait AGC accurate lock time
-		ret = 70;
-
-		if (dib8000_update_lna(state))
-			// wait only AGC rough lock time
-			ret = 50;
-		else
-			*tune_state = CT_AGC_STEP_2;
-		break;
-
-	case CT_AGC_STEP_2:
-		dib8000_agc_soft_split(state);
-
-		if (state->cfg.agc_control)
-			state->cfg.agc_control(fe, 0);
-
-		*tune_state = CT_AGC_STOP;
-		break;
-	default:
-		ret = dib8000_agc_soft_split(state);
-		break;
-	}
-	return ret;
-
-}
-
-static void dib8096p_host_bus_drive(struct dib8000_state *state, u8 drive)
-{
-	u16 reg;
-
-	drive &= 0x7;
-
-	/* drive host bus 2, 3, 4 */
-	reg = dib8000_read_word(state, 1798) &
-		~(0x7 | (0x7 << 6) | (0x7 << 12));
-	reg |= (drive<<12) | (drive<<6) | drive;
-	dib8000_write_word(state, 1798, reg);
-
-	/* drive host bus 5,6 */
-	reg = dib8000_read_word(state, 1799) & ~((0x7 << 2) | (0x7 << 8));
-	reg |= (drive<<8) | (drive<<2);
-	dib8000_write_word(state, 1799, reg);
-
-	/* drive host bus 7, 8, 9 */
-	reg = dib8000_read_word(state, 1800) &
-		~(0x7 | (0x7 << 6) | (0x7 << 12));
-	reg |= (drive<<12) | (drive<<6) | drive;
-	dib8000_write_word(state, 1800, reg);
-
-	/* drive host bus 10, 11 */
-	reg = dib8000_read_word(state, 1801) & ~((0x7 << 2) | (0x7 << 8));
-	reg |= (drive<<8) | (drive<<2);
-	dib8000_write_word(state, 1801, reg);
-
-	/* drive host bus 12, 13, 14 */
-	reg = dib8000_read_word(state, 1802) &
-		~(0x7 | (0x7 << 6) | (0x7 << 12));
-	reg |= (drive<<12) | (drive<<6) | drive;
-	dib8000_write_word(state, 1802, reg);
-}
-
-static u32 dib8096p_calcSyncFreq(u32 P_Kin, u32 P_Kout,
-		u32 insertExtSynchro, u32 syncSize)
-{
-	u32 quantif = 3;
-	u32 nom = (insertExtSynchro * P_Kin+syncSize);
-	u32 denom = P_Kout;
-	u32 syncFreq = ((nom << quantif) / denom);
-
-	if ((syncFreq & ((1 << quantif) - 1)) != 0)
-		syncFreq = (syncFreq >> quantif) + 1;
-	else
-		syncFreq = (syncFreq >> quantif);
-
-	if (syncFreq != 0)
-		syncFreq = syncFreq - 1;
-
-	return syncFreq;
-}
-
-static void dib8096p_cfg_DibTx(struct dib8000_state *state, u32 P_Kin,
-		u32 P_Kout, u32 insertExtSynchro, u32 synchroMode,
-		u32 syncWord, u32 syncSize)
-{
-	dprintk("Configure DibStream Tx");
-
-	dib8000_write_word(state, 1615, 1);
-	dib8000_write_word(state, 1603, P_Kin);
-	dib8000_write_word(state, 1605, P_Kout);
-	dib8000_write_word(state, 1606, insertExtSynchro);
-	dib8000_write_word(state, 1608, synchroMode);
-	dib8000_write_word(state, 1609, (syncWord >> 16) & 0xffff);
-	dib8000_write_word(state, 1610, syncWord & 0xffff);
-	dib8000_write_word(state, 1612, syncSize);
-	dib8000_write_word(state, 1615, 0);
-}
-
-static void dib8096p_cfg_DibRx(struct dib8000_state *state, u32 P_Kin,
-		u32 P_Kout, u32 synchroMode, u32 insertExtSynchro,
-		u32 syncWord, u32 syncSize, u32 dataOutRate)
-{
-	u32 syncFreq;
-
-	dprintk("Configure DibStream Rx synchroMode = %d", synchroMode);
-
-	if ((P_Kin != 0) && (P_Kout != 0)) {
-		syncFreq = dib8096p_calcSyncFreq(P_Kin, P_Kout,
-				insertExtSynchro, syncSize);
-		dib8000_write_word(state, 1542, syncFreq);
-	}
-
-	dib8000_write_word(state, 1554, 1);
-	dib8000_write_word(state, 1536, P_Kin);
-	dib8000_write_word(state, 1537, P_Kout);
-	dib8000_write_word(state, 1539, synchroMode);
-	dib8000_write_word(state, 1540, (syncWord >> 16) & 0xffff);
-	dib8000_write_word(state, 1541, syncWord & 0xffff);
-	dib8000_write_word(state, 1543, syncSize);
-	dib8000_write_word(state, 1544, dataOutRate);
-	dib8000_write_word(state, 1554, 0);
-}
-
-static void dib8096p_enMpegMux(struct dib8000_state *state, int onoff)
-{
-	u16 reg_1287;
-
-	reg_1287 = dib8000_read_word(state, 1287);
-
-	switch (onoff) {
-	case 1:
-			reg_1287 &= ~(1 << 8);
-			break;
-	case 0:
-			reg_1287 |= (1 << 8);
-			break;
-	}
-
-	dib8000_write_word(state, 1287, reg_1287);
-}
-
-static void dib8096p_configMpegMux(struct dib8000_state *state,
-		u16 pulseWidth, u16 enSerialMode, u16 enSerialClkDiv2)
-{
-	u16 reg_1287;
-
-	dprintk("Enable Mpeg mux");
-
-	dib8096p_enMpegMux(state, 0);
-
-	/* If the input mode is MPEG do not divide the serial clock */
-	if ((enSerialMode == 1) && (state->input_mode_mpeg == 1))
-		enSerialClkDiv2 = 0;
-
-	reg_1287 = ((pulseWidth & 0x1f) << 3) |
-		((enSerialMode & 0x1) << 2) | (enSerialClkDiv2 & 0x1);
-	dib8000_write_word(state, 1287, reg_1287);
-
-	dib8096p_enMpegMux(state, 1);
-}
-
-static void dib8096p_setDibTxMux(struct dib8000_state *state, int mode)
-{
-	u16 reg_1288 = dib8000_read_word(state, 1288) & ~(0x7 << 7);
-
-	switch (mode) {
-	case MPEG_ON_DIBTX:
-			dprintk("SET MPEG ON DIBSTREAM TX");
-			dib8096p_cfg_DibTx(state, 8, 5, 0, 0, 0, 0);
-			reg_1288 |= (1 << 9); break;
-	case DIV_ON_DIBTX:
-			dprintk("SET DIV_OUT ON DIBSTREAM TX");
-			dib8096p_cfg_DibTx(state, 5, 5, 0, 0, 0, 0);
-			reg_1288 |= (1 << 8); break;
-	case ADC_ON_DIBTX:
-			dprintk("SET ADC_OUT ON DIBSTREAM TX");
-			dib8096p_cfg_DibTx(state, 20, 5, 10, 0, 0, 0);
-			reg_1288 |= (1 << 7); break;
-	default:
-			break;
-	}
-	dib8000_write_word(state, 1288, reg_1288);
-}
-
-static void dib8096p_setHostBusMux(struct dib8000_state *state, int mode)
-{
-	u16 reg_1288 = dib8000_read_word(state, 1288) & ~(0x7 << 4);
-
-	switch (mode) {
-	case DEMOUT_ON_HOSTBUS:
-			dprintk("SET DEM OUT OLD INTERF ON HOST BUS");
-			dib8096p_enMpegMux(state, 0);
-			reg_1288 |= (1 << 6);
-			break;
-	case DIBTX_ON_HOSTBUS:
-			dprintk("SET DIBSTREAM TX ON HOST BUS");
-			dib8096p_enMpegMux(state, 0);
-			reg_1288 |= (1 << 5);
-			break;
-	case MPEG_ON_HOSTBUS:
-			dprintk("SET MPEG MUX ON HOST BUS");
-			reg_1288 |= (1 << 4);
-			break;
-	default:
-			break;
-	}
-	dib8000_write_word(state, 1288, reg_1288);
-}
-
-static int dib8096p_set_diversity_in(struct dvb_frontend *fe, int onoff)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	u16 reg_1287;
-
-	switch (onoff) {
-	case 0: /* only use the internal way - not the diversity input */
-			dprintk("%s mode OFF : by default Enable Mpeg INPUT",
-					__func__);
-			/* outputRate = 8 */
-			dib8096p_cfg_DibRx(state, 8, 5, 0, 0, 0, 8, 0);
-
-			/* Do not divide the serial clock of MPEG MUX in
-			   SERIAL MODE in case input mode MPEG is used */
-			reg_1287 = dib8000_read_word(state, 1287);
-			/* enSerialClkDiv2 == 1 ? */
-			if ((reg_1287 & 0x1) == 1) {
-				/* force enSerialClkDiv2 = 0 */
-				reg_1287 &= ~0x1;
-				dib8000_write_word(state, 1287, reg_1287);
-			}
-			state->input_mode_mpeg = 1;
-			break;
-	case 1: /* both ways */
-	case 2: /* only the diversity input */
-			dprintk("%s ON : Enable diversity INPUT", __func__);
-			dib8096p_cfg_DibRx(state, 5, 5, 0, 0, 0, 0, 0);
-			state->input_mode_mpeg = 0;
-			break;
-	}
-
-	dib8000_set_diversity_in(state->fe[0], onoff);
-	return 0;
-}
-
-static int dib8096p_set_output_mode(struct dvb_frontend *fe, int mode)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	u16 outreg, smo_mode, fifo_threshold;
-	u8 prefer_mpeg_mux_use = 1;
-	int ret = 0;
-
-	dib8096p_host_bus_drive(state, 1);
-
-	fifo_threshold = 1792;
-	smo_mode = (dib8000_read_word(state, 299) & 0x0050) | (1 << 1);
-	outreg   = dib8000_read_word(state, 1286) &
-		~((1 << 10) | (0x7 << 6) | (1 << 1));
-
-	switch (mode) {
-	case OUTMODE_HIGH_Z:
-			outreg = 0;
-			break;
-
-	case OUTMODE_MPEG2_SERIAL:
-			if (prefer_mpeg_mux_use) {
-				dprintk("dib8096P setting output mode TS_SERIAL using Mpeg Mux");
-				dib8096p_configMpegMux(state, 3, 1, 1);
-				dib8096p_setHostBusMux(state, MPEG_ON_HOSTBUS);
-			} else {/* Use Smooth block */
-				dprintk("dib8096P setting output mode TS_SERIAL using Smooth bloc");
-				dib8096p_setHostBusMux(state,
-						DEMOUT_ON_HOSTBUS);
-				outreg |= (2 << 6) | (0 << 1);
-			}
-			break;
-
-	case OUTMODE_MPEG2_PAR_GATED_CLK:
-			if (prefer_mpeg_mux_use) {
-				dprintk("dib8096P setting output mode TS_PARALLEL_GATED using Mpeg Mux");
-				dib8096p_configMpegMux(state, 2, 0, 0);
-				dib8096p_setHostBusMux(state, MPEG_ON_HOSTBUS);
-			} else { /* Use Smooth block */
-				dprintk("dib8096P setting output mode TS_PARALLEL_GATED using Smooth block");
-				dib8096p_setHostBusMux(state,
-						DEMOUT_ON_HOSTBUS);
-				outreg |= (0 << 6);
-			}
-			break;
-
-	case OUTMODE_MPEG2_PAR_CONT_CLK: /* Using Smooth block only */
-			dprintk("dib8096P setting output mode TS_PARALLEL_CONT using Smooth block");
-			dib8096p_setHostBusMux(state, DEMOUT_ON_HOSTBUS);
-			outreg |= (1 << 6);
-			break;
-
-	case OUTMODE_MPEG2_FIFO:
-			/* Using Smooth block because not supported
-			   by new Mpeg Mux bloc */
-			dprintk("dib8096P setting output mode TS_FIFO using Smooth block");
-			dib8096p_setHostBusMux(state, DEMOUT_ON_HOSTBUS);
-			outreg |= (5 << 6);
-			smo_mode |= (3 << 1);
-			fifo_threshold = 512;
-			break;
-
-	case OUTMODE_DIVERSITY:
-			dprintk("dib8096P setting output mode MODE_DIVERSITY");
-			dib8096p_setDibTxMux(state, DIV_ON_DIBTX);
-			dib8096p_setHostBusMux(state, DIBTX_ON_HOSTBUS);
-			break;
-
-	case OUTMODE_ANALOG_ADC:
-			dprintk("dib8096P setting output mode MODE_ANALOG_ADC");
-			dib8096p_setDibTxMux(state, ADC_ON_DIBTX);
-			dib8096p_setHostBusMux(state, DIBTX_ON_HOSTBUS);
-			break;
-	}
-
-	if (mode != OUTMODE_HIGH_Z)
-		outreg |= (1<<10);
-
-	dprintk("output_mpeg2_in_188_bytes = %d",
-			state->cfg.output_mpeg2_in_188_bytes);
-	if (state->cfg.output_mpeg2_in_188_bytes)
-		smo_mode |= (1 << 5);
-
-	ret |= dib8000_write_word(state, 299, smo_mode);
-	/* synchronous fread */
-	ret |= dib8000_write_word(state, 299 + 1, fifo_threshold);
-	ret |= dib8000_write_word(state, 1286, outreg);
-
-	return ret;
-}
-
-static int map_addr_to_serpar_number(struct i2c_msg *msg)
-{
-	if (msg->buf[0] <= 15)
-		msg->buf[0] -= 1;
-	else if (msg->buf[0] == 17)
-		msg->buf[0] = 15;
-	else if (msg->buf[0] == 16)
-		msg->buf[0] = 17;
-	else if (msg->buf[0] == 19)
-		msg->buf[0] = 16;
-	else if (msg->buf[0] >= 21 && msg->buf[0] <= 25)
-		msg->buf[0] -= 3;
-	else if (msg->buf[0] == 28)
-		msg->buf[0] = 23;
-	else if (msg->buf[0] == 99)
-		msg->buf[0] = 99;
-	else
-		return -EINVAL;
-	return 0;
-}
-
-static int dib8096p_tuner_write_serpar(struct i2c_adapter *i2c_adap,
-		struct i2c_msg msg[], int num)
-{
-	struct dib8000_state *state = i2c_get_adapdata(i2c_adap);
-	u8 n_overflow = 1;
-	u16 i = 1000;
-	u16 serpar_num = msg[0].buf[0];
-
-	while (n_overflow == 1 && i) {
-		n_overflow = (dib8000_read_word(state, 1984) >> 1) & 0x1;
-		i--;
-		if (i == 0)
-			dprintk("Tuner ITF: write busy (overflow)");
-	}
-	dib8000_write_word(state, 1985, (1 << 6) | (serpar_num & 0x3f));
-	dib8000_write_word(state, 1986, (msg[0].buf[1] << 8) | msg[0].buf[2]);
-
-	return num;
-}
-
-static int dib8096p_tuner_read_serpar(struct i2c_adapter *i2c_adap,
-		struct i2c_msg msg[], int num)
-{
-	struct dib8000_state *state = i2c_get_adapdata(i2c_adap);
-	u8 n_overflow = 1, n_empty = 1;
-	u16 i = 1000;
-	u16 serpar_num = msg[0].buf[0];
-	u16 read_word;
-
-	while (n_overflow == 1 && i) {
-		n_overflow = (dib8000_read_word(state, 1984) >> 1) & 0x1;
-		i--;
-		if (i == 0)
-			dprintk("TunerITF: read busy (overflow)");
-	}
-	dib8000_write_word(state, 1985, (0<<6) | (serpar_num&0x3f));
-
-	i = 1000;
-	while (n_empty == 1 && i) {
-		n_empty = dib8000_read_word(state, 1984)&0x1;
-		i--;
-		if (i == 0)
-			dprintk("TunerITF: read busy (empty)");
-	}
-
-	read_word = dib8000_read_word(state, 1987);
-	msg[1].buf[0] = (read_word >> 8) & 0xff;
-	msg[1].buf[1] = (read_word) & 0xff;
-
-	return num;
-}
-
-static int dib8096p_tuner_rw_serpar(struct i2c_adapter *i2c_adap,
-		struct i2c_msg msg[], int num)
-{
-	if (map_addr_to_serpar_number(&msg[0]) == 0) {
-		if (num == 1) /* write */
-			return dib8096p_tuner_write_serpar(i2c_adap, msg, 1);
-		else /* read */
-			return dib8096p_tuner_read_serpar(i2c_adap, msg, 2);
-	}
-	return num;
-}
-
-static int dib8096p_rw_on_apb(struct i2c_adapter *i2c_adap,
-		struct i2c_msg msg[], int num, u16 apb_address)
-{
-	struct dib8000_state *state = i2c_get_adapdata(i2c_adap);
-	u16 word;
-
-	if (num == 1) {		/* write */
-		dib8000_write_word(state, apb_address,
-				((msg[0].buf[1] << 8) | (msg[0].buf[2])));
-	} else {
-		word = dib8000_read_word(state, apb_address);
-		msg[1].buf[0] = (word >> 8) & 0xff;
-		msg[1].buf[1] = (word) & 0xff;
-	}
-	return num;
-}
-
-static int dib8096p_tuner_xfer(struct i2c_adapter *i2c_adap,
-		struct i2c_msg msg[], int num)
-{
-	struct dib8000_state *state = i2c_get_adapdata(i2c_adap);
-	u16 apb_address = 0, word;
-	int i = 0;
-
-	switch (msg[0].buf[0]) {
-	case 0x12:
-			apb_address = 1920;
-			break;
-	case 0x14:
-			apb_address = 1921;
-			break;
-	case 0x24:
-			apb_address = 1922;
-			break;
-	case 0x1a:
-			apb_address = 1923;
-			break;
-	case 0x22:
-			apb_address = 1924;
-			break;
-	case 0x33:
-			apb_address = 1926;
-			break;
-	case 0x34:
-			apb_address = 1927;
-			break;
-	case 0x35:
-			apb_address = 1928;
-			break;
-	case 0x36:
-			apb_address = 1929;
-			break;
-	case 0x37:
-			apb_address = 1930;
-			break;
-	case 0x38:
-			apb_address = 1931;
-			break;
-	case 0x39:
-			apb_address = 1932;
-			break;
-	case 0x2a:
-			apb_address = 1935;
-			break;
-	case 0x2b:
-			apb_address = 1936;
-			break;
-	case 0x2c:
-			apb_address = 1937;
-			break;
-	case 0x2d:
-			apb_address = 1938;
-			break;
-	case 0x2e:
-			apb_address = 1939;
-			break;
-	case 0x2f:
-			apb_address = 1940;
-			break;
-	case 0x30:
-			apb_address = 1941;
-			break;
-	case 0x31:
-			apb_address = 1942;
-			break;
-	case 0x32:
-			apb_address = 1943;
-			break;
-	case 0x3e:
-			apb_address = 1944;
-			break;
-	case 0x3f:
-			apb_address = 1945;
-			break;
-	case 0x40:
-			apb_address = 1948;
-			break;
-	case 0x25:
-			apb_address = 936;
-			break;
-	case 0x26:
-			apb_address = 937;
-			break;
-	case 0x27:
-			apb_address = 938;
-			break;
-	case 0x28:
-			apb_address = 939;
-			break;
-	case 0x1d:
-			/* get sad sel request */
-			i = ((dib8000_read_word(state, 921) >> 12)&0x3);
-			word = dib8000_read_word(state, 924+i);
-			msg[1].buf[0] = (word >> 8) & 0xff;
-			msg[1].buf[1] = (word) & 0xff;
-			return num;
-	case 0x1f:
-			if (num == 1) {	/* write */
-				word = (u16) ((msg[0].buf[1] << 8) |
-						msg[0].buf[2]);
-				/* in the VGAMODE Sel are located on bit 0/1 */
-				word &= 0x3;
-				word = (dib8000_read_word(state, 921) &
-						~(3<<12)) | (word<<12);
-				/* Set the proper input */
-				dib8000_write_word(state, 921, word);
-				return num;
-			}
-	}
-
-	if (apb_address != 0) /* R/W acces via APB */
-		return dib8096p_rw_on_apb(i2c_adap, msg, num, apb_address);
-	else  /* R/W access via SERPAR  */
-		return dib8096p_tuner_rw_serpar(i2c_adap, msg, num);
-
-	return 0;
-}
-
-static u32 dib8096p_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm dib8096p_tuner_xfer_algo = {
-	.master_xfer = dib8096p_tuner_xfer,
-	.functionality = dib8096p_i2c_func,
-};
-
-struct i2c_adapter *dib8096p_get_i2c_tuner(struct dvb_frontend *fe)
-{
-	struct dib8000_state *st = fe->demodulator_priv;
-	return &st->dib8096p_tuner_adap;
-}
-EXPORT_SYMBOL(dib8096p_get_i2c_tuner);
-
-int dib8096p_tuner_sleep(struct dvb_frontend *fe, int onoff)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	u16 en_cur_state;
-
-	dprintk("sleep dib8096p: %d", onoff);
-
-	en_cur_state = dib8000_read_word(state, 1922);
-
-	/* LNAs and MIX are ON and therefore it is a valid configuration */
-	if (en_cur_state > 0xff)
-		state->tuner_enable = en_cur_state ;
-
-	if (onoff)
-		en_cur_state &= 0x00ff;
-	else {
-		if (state->tuner_enable != 0)
-			en_cur_state = state->tuner_enable;
-	}
-
-	dib8000_write_word(state, 1922, en_cur_state);
-
-	return 0;
-}
-EXPORT_SYMBOL(dib8096p_tuner_sleep);
-
-static const s32 lut_1000ln_mant[] =
-{
-	908, 7003, 7090, 7170, 7244, 7313, 7377, 7438, 7495, 7549, 7600
-};
-
-s32 dib8000_get_adc_power(struct dvb_frontend *fe, u8 mode)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	u32 ix = 0, tmp_val = 0, exp = 0, mant = 0;
-	s32 val;
-
-	val = dib8000_read32(state, 384);
-	if (mode) {
-		tmp_val = val;
-		while (tmp_val >>= 1)
-			exp++;
-		mant = (val * 1000 / (1<<exp));
-		ix = (u8)((mant-1000)/100); /* index of the LUT */
-		val = (lut_1000ln_mant[ix] + 693*(exp-20) - 6908);
-		val = (val*256)/1000;
-	}
-	return val;
-}
-EXPORT_SYMBOL(dib8000_get_adc_power);
-
-int dib8090p_get_dc_power(struct dvb_frontend *fe, u8 IQ)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	int val = 0;
-
-	switch (IQ) {
-	case 1:
-			val = dib8000_read_word(state, 403);
-			break;
-	case 0:
-			val = dib8000_read_word(state, 404);
-			break;
-	}
-	if (val  & 0x200)
-		val -= 1024;
-
-	return val;
-}
-EXPORT_SYMBOL(dib8090p_get_dc_power);
-
-static void dib8000_update_timf(struct dib8000_state *state)
-{
-	u32 timf = state->timf = dib8000_read32(state, 435);
-
-	dib8000_write_word(state, 29, (u16) (timf >> 16));
-	dib8000_write_word(state, 30, (u16) (timf & 0xffff));
-	dprintk("Updated timing frequency: %d (default: %d)", state->timf, state->timf_default);
-}
-
-u32 dib8000_ctrl_timf(struct dvb_frontend *fe, uint8_t op, uint32_t timf)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-
-	switch (op) {
-	case DEMOD_TIMF_SET:
-			state->timf = timf;
-			break;
-	case DEMOD_TIMF_UPDATE:
-			dib8000_update_timf(state);
-			break;
-	case DEMOD_TIMF_GET:
-			break;
-	}
-	dib8000_set_bandwidth(state->fe[0], 6000);
-
-	return state->timf;
-}
-EXPORT_SYMBOL(dib8000_ctrl_timf);
-
-static const u16 adc_target_16dB[11] = {
-	(1 << 13) - 825 - 117,
-	(1 << 13) - 837 - 117,
-	(1 << 13) - 811 - 117,
-	(1 << 13) - 766 - 117,
-	(1 << 13) - 737 - 117,
-	(1 << 13) - 693 - 117,
-	(1 << 13) - 648 - 117,
-	(1 << 13) - 619 - 117,
-	(1 << 13) - 575 - 117,
-	(1 << 13) - 531 - 117,
-	(1 << 13) - 501 - 117
-};
-static const u8 permu_seg[] = { 6, 5, 7, 4, 8, 3, 9, 2, 10, 1, 11, 0, 12 };
-
-static void dib8000_set_channel(struct dib8000_state *state, u8 seq, u8 autosearching)
-{
-	u16 mode, max_constellation, seg_diff_mask = 0, nbseg_diff = 0;
-	u8 guard, crate, constellation, timeI;
-	u16 i, coeff[4], P_cfr_left_edge = 0, P_cfr_right_edge = 0, seg_mask13 = 0x1fff;	// All 13 segments enabled
-	const s16 *ncoeff = NULL, *ana_fe;
-	u16 tmcc_pow = 0;
-	u16 coff_pow = 0x2800;
-	u16 init_prbs = 0xfff;
-	u16 ana_gain = 0;
-
-	if (state->revision == 0x8090)
-		dib8000_init_sdram(state);
-
-	if (state->ber_monitored_layer != LAYER_ALL)
-		dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & 0x60) | state->ber_monitored_layer);
-	else
-		dib8000_write_word(state, 285, dib8000_read_word(state, 285) & 0x60);
-
-	i = dib8000_read_word(state, 26) & 1;	// P_dds_invspec
-	dib8000_write_word(state, 26, state->fe[0]->dtv_property_cache.inversion^i);
-
-	if (state->fe[0]->dtv_property_cache.isdbt_sb_mode) {
-		//compute new dds_freq for the seg and adjust prbs
-		int seg_offset =
-			state->fe[0]->dtv_property_cache.isdbt_sb_segment_idx -
-			(state->fe[0]->dtv_property_cache.isdbt_sb_segment_count / 2) -
-			(state->fe[0]->dtv_property_cache.isdbt_sb_segment_count % 2);
-		int clk = state->cfg.pll->internal;
-		u32 segtodds = ((u32) (430 << 23) / clk) << 3;	// segtodds = SegBW / Fclk * pow(2,26)
-		int dds_offset = seg_offset * segtodds;
-		int new_dds, sub_channel;
-		if ((state->fe[0]->dtv_property_cache.isdbt_sb_segment_count % 2) == 0)
-			dds_offset -= (int)(segtodds / 2);
-
-		if (state->cfg.pll->ifreq == 0) {
-			if ((state->fe[0]->dtv_property_cache.inversion ^ i) == 0) {
-				dib8000_write_word(state, 26, dib8000_read_word(state, 26) | 1);
-				new_dds = dds_offset;
-			} else
-				new_dds = dds_offset;
-
-			// We shift tuning frequency if the wanted segment is :
-			//  - the segment of center frequency with an odd total number of segments
-			//  - the segment to the left of center frequency with an even total number of segments
-			//  - the segment to the right of center frequency with an even total number of segments
-			if ((state->fe[0]->dtv_property_cache.delivery_system == SYS_ISDBT)
-				&& (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1)
-					&& (((state->fe[0]->dtv_property_cache.isdbt_sb_segment_count % 2)
-					  && (state->fe[0]->dtv_property_cache.isdbt_sb_segment_idx ==
-				  ((state->fe[0]->dtv_property_cache.isdbt_sb_segment_count / 2) + 1)))
-					 || (((state->fe[0]->dtv_property_cache.isdbt_sb_segment_count % 2) == 0)
-						 && (state->fe[0]->dtv_property_cache.isdbt_sb_segment_idx == (state->fe[0]->dtv_property_cache.isdbt_sb_segment_count / 2)))
-					 || (((state->fe[0]->dtv_property_cache.isdbt_sb_segment_count % 2) == 0)
-						 && (state->fe[0]->dtv_property_cache.isdbt_sb_segment_idx ==
-							 ((state->fe[0]->dtv_property_cache.isdbt_sb_segment_count / 2) + 1)))
-					)) {
-				new_dds -= ((u32) (850 << 22) / clk) << 4;	// new_dds = 850 (freq shift in KHz) / Fclk * pow(2,26)
-			}
-		} else {
-			if ((state->fe[0]->dtv_property_cache.inversion ^ i) == 0)
-				new_dds = state->cfg.pll->ifreq - dds_offset;
-			else
-				new_dds = state->cfg.pll->ifreq + dds_offset;
-		}
-		dib8000_write_word(state, 27, (u16) ((new_dds >> 16) & 0x01ff));
-		dib8000_write_word(state, 28, (u16) (new_dds & 0xffff));
-		if (state->fe[0]->dtv_property_cache.isdbt_sb_segment_count % 2)
-			sub_channel = ((state->fe[0]->dtv_property_cache.isdbt_sb_subchannel + (3 * seg_offset) + 1) % 41) / 3;
-		else
-			sub_channel = ((state->fe[0]->dtv_property_cache.isdbt_sb_subchannel + (3 * seg_offset)) % 41) / 3;
-		sub_channel -= 6;
-
-		if (state->fe[0]->dtv_property_cache.transmission_mode == TRANSMISSION_MODE_2K
-				|| state->fe[0]->dtv_property_cache.transmission_mode == TRANSMISSION_MODE_4K) {
-			dib8000_write_word(state, 219, dib8000_read_word(state, 219) | 0x1);	//adp_pass =1
-			dib8000_write_word(state, 190, dib8000_read_word(state, 190) | (0x1 << 14));	//pha3_force_pha_shift = 1
-		} else {
-			dib8000_write_word(state, 219, dib8000_read_word(state, 219) & 0xfffe);	//adp_pass =0
-			dib8000_write_word(state, 190, dib8000_read_word(state, 190) & 0xbfff);	//pha3_force_pha_shift = 0
-		}
-
-		switch (state->fe[0]->dtv_property_cache.transmission_mode) {
-		case TRANSMISSION_MODE_2K:
-			switch (sub_channel) {
-			case -6:
-				init_prbs = 0x0;
-				break;	// 41, 0, 1
-			case -5:
-				init_prbs = 0x423;
-				break;	// 02~04
-			case -4:
-				init_prbs = 0x9;
-				break;	// 05~07
-			case -3:
-				init_prbs = 0x5C7;
-				break;	// 08~10
-			case -2:
-				init_prbs = 0x7A6;
-				break;	// 11~13
-			case -1:
-				init_prbs = 0x3D8;
-				break;	// 14~16
-			case 0:
-				init_prbs = 0x527;
-				break;	// 17~19
-			case 1:
-				init_prbs = 0x7FF;
-				break;	// 20~22
-			case 2:
-				init_prbs = 0x79B;
-				break;	// 23~25
-			case 3:
-				init_prbs = 0x3D6;
-				break;	// 26~28
-			case 4:
-				init_prbs = 0x3A2;
-				break;	// 29~31
-			case 5:
-				init_prbs = 0x53B;
-				break;	// 32~34
-			case 6:
-				init_prbs = 0x2F4;
-				break;	// 35~37
-			default:
-			case 7:
-				init_prbs = 0x213;
-				break;	// 38~40
-			}
-			break;
-
-		case TRANSMISSION_MODE_4K:
-			switch (sub_channel) {
-			case -6:
-				init_prbs = 0x0;
-				break;	// 41, 0, 1
-			case -5:
-				init_prbs = 0x208;
-				break;	// 02~04
-			case -4:
-				init_prbs = 0xC3;
-				break;	// 05~07
-			case -3:
-				init_prbs = 0x7B9;
-				break;	// 08~10
-			case -2:
-				init_prbs = 0x423;
-				break;	// 11~13
-			case -1:
-				init_prbs = 0x5C7;
-				break;	// 14~16
-			case 0:
-				init_prbs = 0x3D8;
-				break;	// 17~19
-			case 1:
-				init_prbs = 0x7FF;
-				break;	// 20~22
-			case 2:
-				init_prbs = 0x3D6;
-				break;	// 23~25
-			case 3:
-				init_prbs = 0x53B;
-				break;	// 26~28
-			case 4:
-				init_prbs = 0x213;
-				break;	// 29~31
-			case 5:
-				init_prbs = 0x29;
-				break;	// 32~34
-			case 6:
-				init_prbs = 0xD0;
-				break;	// 35~37
-			default:
-			case 7:
-				init_prbs = 0x48E;
-				break;	// 38~40
-			}
-			break;
-
-		default:
-		case TRANSMISSION_MODE_8K:
-			switch (sub_channel) {
-			case -6:
-				init_prbs = 0x0;
-				break;	// 41, 0, 1
-			case -5:
-				init_prbs = 0x740;
-				break;	// 02~04
-			case -4:
-				init_prbs = 0x069;
-				break;	// 05~07
-			case -3:
-				init_prbs = 0x7DD;
-				break;	// 08~10
-			case -2:
-				init_prbs = 0x208;
-				break;	// 11~13
-			case -1:
-				init_prbs = 0x7B9;
-				break;	// 14~16
-			case 0:
-				init_prbs = 0x5C7;
-				break;	// 17~19
-			case 1:
-				init_prbs = 0x7FF;
-				break;	// 20~22
-			case 2:
-				init_prbs = 0x53B;
-				break;	// 23~25
-			case 3:
-				init_prbs = 0x29;
-				break;	// 26~28
-			case 4:
-				init_prbs = 0x48E;
-				break;	// 29~31
-			case 5:
-				init_prbs = 0x4C4;
-				break;	// 32~34
-			case 6:
-				init_prbs = 0x367;
-				break;	// 33~37
-			default:
-			case 7:
-				init_prbs = 0x684;
-				break;	// 38~40
-			}
-			break;
-		}
-	} else {
-		dib8000_write_word(state, 27, (u16) ((state->cfg.pll->ifreq >> 16) & 0x01ff));
-		dib8000_write_word(state, 28, (u16) (state->cfg.pll->ifreq & 0xffff));
-		dib8000_write_word(state, 26, (u16) ((state->cfg.pll->ifreq >> 25) & 0x0003));
-	}
-	/*P_mode == ?? */
-	dib8000_write_word(state, 10, (seq << 4));
-	//  dib8000_write_word(state, 287, (dib8000_read_word(state, 287) & 0xe000) | 0x1000);
-
-	switch (state->fe[0]->dtv_property_cache.guard_interval) {
-	case GUARD_INTERVAL_1_32:
-		guard = 0;
-		break;
-	case GUARD_INTERVAL_1_16:
-		guard = 1;
-		break;
-	case GUARD_INTERVAL_1_8:
-		guard = 2;
-		break;
-	case GUARD_INTERVAL_1_4:
-	default:
-		guard = 3;
-		break;
-	}
-
-	dib8000_write_word(state, 1, (init_prbs << 2) | (guard & 0x3));	// ADDR 1
-
-	max_constellation = DQPSK;
-	for (i = 0; i < 3; i++) {
-		switch (state->fe[0]->dtv_property_cache.layer[i].modulation) {
-		case DQPSK:
-			constellation = 0;
-			break;
-		case QPSK:
-			constellation = 1;
-			break;
-		case QAM_16:
-			constellation = 2;
-			break;
-		case QAM_64:
-		default:
-			constellation = 3;
-			break;
-		}
-
-		switch (state->fe[0]->dtv_property_cache.layer[i].fec) {
-		case FEC_1_2:
-			crate = 1;
-			break;
-		case FEC_2_3:
-			crate = 2;
-			break;
-		case FEC_3_4:
-			crate = 3;
-			break;
-		case FEC_5_6:
-			crate = 5;
-			break;
-		case FEC_7_8:
-		default:
-			crate = 7;
-			break;
-		}
-
-		if ((state->fe[0]->dtv_property_cache.layer[i].interleaving > 0) &&
-				((state->fe[0]->dtv_property_cache.layer[i].interleaving <= 3) ||
-				 (state->fe[0]->dtv_property_cache.layer[i].interleaving == 4 && state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1))
-			)
-			timeI = state->fe[0]->dtv_property_cache.layer[i].interleaving;
-		else
-			timeI = 0;
-		dib8000_write_word(state, 2 + i, (constellation << 10) | ((state->fe[0]->dtv_property_cache.layer[i].segment_count & 0xf) << 6) |
-					(crate << 3) | timeI);
-		if (state->fe[0]->dtv_property_cache.layer[i].segment_count > 0) {
-			switch (max_constellation) {
-			case DQPSK:
-			case QPSK:
-				if (state->fe[0]->dtv_property_cache.layer[i].modulation == QAM_16 ||
-					state->fe[0]->dtv_property_cache.layer[i].modulation == QAM_64)
-					max_constellation = state->fe[0]->dtv_property_cache.layer[i].modulation;
-				break;
-			case QAM_16:
-				if (state->fe[0]->dtv_property_cache.layer[i].modulation == QAM_64)
-					max_constellation = state->fe[0]->dtv_property_cache.layer[i].modulation;
-				break;
-			}
-		}
-	}
-
-	mode = fft_to_mode(state);
-
-	//dib8000_write_word(state, 5, 13); /*p_last_seg = 13*/
-
-	dib8000_write_word(state, 274, (dib8000_read_word(state, 274) & 0xffcf) |
-				((state->fe[0]->dtv_property_cache.isdbt_partial_reception & 1) << 5) | ((state->fe[0]->dtv_property_cache.
-												 isdbt_sb_mode & 1) << 4));
-
-	dprintk("mode = %d ; guard = %d", mode, state->fe[0]->dtv_property_cache.guard_interval);
-
-	/* signal optimization parameter */
-
-	if (state->fe[0]->dtv_property_cache.isdbt_partial_reception) {
-		seg_diff_mask = (state->fe[0]->dtv_property_cache.layer[0].modulation == DQPSK) << permu_seg[0];
-		for (i = 1; i < 3; i++)
-			nbseg_diff +=
-				(state->fe[0]->dtv_property_cache.layer[i].modulation == DQPSK) * state->fe[0]->dtv_property_cache.layer[i].segment_count;
-		for (i = 0; i < nbseg_diff; i++)
-			seg_diff_mask |= 1 << permu_seg[i + 1];
-	} else {
-		for (i = 0; i < 3; i++)
-			nbseg_diff +=
-				(state->fe[0]->dtv_property_cache.layer[i].modulation == DQPSK) * state->fe[0]->dtv_property_cache.layer[i].segment_count;
-		for (i = 0; i < nbseg_diff; i++)
-			seg_diff_mask |= 1 << permu_seg[i];
-	}
-	dprintk("nbseg_diff = %X (%d)", seg_diff_mask, seg_diff_mask);
-
-	state->differential_constellation = (seg_diff_mask != 0);
-	if (state->revision != 0x8090)
-		dib8000_set_diversity_in(state->fe[0], state->diversity_onoff);
-	else
-		dib8096p_set_diversity_in(state->fe[0], state->diversity_onoff);
-
-	if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1) {
-		if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 1)
-			seg_mask13 = 0x00E0;
-		else		// 1-segment
-			seg_mask13 = 0x0040;
-	} else
-		seg_mask13 = 0x1fff;
-
-	// WRITE: Mode & Diff mask
-	dib8000_write_word(state, 0, (mode << 13) | seg_diff_mask);
-
-	if ((seg_diff_mask) || (state->fe[0]->dtv_property_cache.isdbt_sb_mode))
-		dib8000_write_word(state, 268, (dib8000_read_word(state, 268) & 0xF9FF) | 0x0200);
-	else
-		dib8000_write_word(state, 268, (2 << 9) | 39);	//init value
-
-	// ---- SMALL ----
-	// P_small_seg_diff
-	dib8000_write_word(state, 352, seg_diff_mask);	// ADDR 352
-
-	dib8000_write_word(state, 353, seg_mask13);	// ADDR 353
-
-/*	// P_small_narrow_band=0, P_small_last_seg=13, P_small_offset_num_car=5 */
-
-	// ---- SMALL ----
-	if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1) {
-		switch (state->fe[0]->dtv_property_cache.transmission_mode) {
-		case TRANSMISSION_MODE_2K:
-			if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 0) {
-				if (state->fe[0]->dtv_property_cache.layer[0].modulation == DQPSK)
-					ncoeff = coeff_2k_sb_1seg_dqpsk;
-				else	// QPSK or QAM
-					ncoeff = coeff_2k_sb_1seg;
-			} else {	// 3-segments
-				if (state->fe[0]->dtv_property_cache.layer[0].modulation == DQPSK) {
-					if (state->fe[0]->dtv_property_cache.layer[1].modulation == DQPSK)
-						ncoeff = coeff_2k_sb_3seg_0dqpsk_1dqpsk;
-					else	// QPSK or QAM on external segments
-						ncoeff = coeff_2k_sb_3seg_0dqpsk;
-				} else {	// QPSK or QAM on central segment
-					if (state->fe[0]->dtv_property_cache.layer[1].modulation == DQPSK)
-						ncoeff = coeff_2k_sb_3seg_1dqpsk;
-					else	// QPSK or QAM on external segments
-						ncoeff = coeff_2k_sb_3seg;
-				}
-			}
-			break;
-
-		case TRANSMISSION_MODE_4K:
-			if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 0) {
-				if (state->fe[0]->dtv_property_cache.layer[0].modulation == DQPSK)
-					ncoeff = coeff_4k_sb_1seg_dqpsk;
-				else	// QPSK or QAM
-					ncoeff = coeff_4k_sb_1seg;
-			} else {	// 3-segments
-				if (state->fe[0]->dtv_property_cache.layer[0].modulation == DQPSK) {
-					if (state->fe[0]->dtv_property_cache.layer[1].modulation == DQPSK) {
-						ncoeff = coeff_4k_sb_3seg_0dqpsk_1dqpsk;
-					} else {	// QPSK or QAM on external segments
-						ncoeff = coeff_4k_sb_3seg_0dqpsk;
-					}
-				} else {	// QPSK or QAM on central segment
-					if (state->fe[0]->dtv_property_cache.layer[1].modulation == DQPSK) {
-						ncoeff = coeff_4k_sb_3seg_1dqpsk;
-					} else	// QPSK or QAM on external segments
-						ncoeff = coeff_4k_sb_3seg;
-				}
-			}
-			break;
-
-		case TRANSMISSION_MODE_AUTO:
-		case TRANSMISSION_MODE_8K:
-		default:
-			if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 0) {
-				if (state->fe[0]->dtv_property_cache.layer[0].modulation == DQPSK)
-					ncoeff = coeff_8k_sb_1seg_dqpsk;
-				else	// QPSK or QAM
-					ncoeff = coeff_8k_sb_1seg;
-			} else {	// 3-segments
-				if (state->fe[0]->dtv_property_cache.layer[0].modulation == DQPSK) {
-					if (state->fe[0]->dtv_property_cache.layer[1].modulation == DQPSK) {
-						ncoeff = coeff_8k_sb_3seg_0dqpsk_1dqpsk;
-					} else {	// QPSK or QAM on external segments
-						ncoeff = coeff_8k_sb_3seg_0dqpsk;
-					}
-				} else {	// QPSK or QAM on central segment
-					if (state->fe[0]->dtv_property_cache.layer[1].modulation == DQPSK) {
-						ncoeff = coeff_8k_sb_3seg_1dqpsk;
-					} else	// QPSK or QAM on external segments
-						ncoeff = coeff_8k_sb_3seg;
-				}
-			}
-			break;
-		}
-		for (i = 0; i < 8; i++)
-			dib8000_write_word(state, 343 + i, ncoeff[i]);
-	}
-
-	// P_small_coef_ext_enable=ISDB-Tsb, P_small_narrow_band=ISDB-Tsb, P_small_last_seg=13, P_small_offset_num_car=5
-	dib8000_write_word(state, 351,
-				(state->fe[0]->dtv_property_cache.isdbt_sb_mode << 9) | (state->fe[0]->dtv_property_cache.isdbt_sb_mode << 8) | (13 << 4) | 5);
-
-	// ---- COFF ----
-	// Carloff, the most robust
-	if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1) {
-
-		// P_coff_cpil_alpha=4, P_coff_inh=0, P_coff_cpil_winlen=64
-		// P_coff_narrow_band=1, P_coff_square_val=1, P_coff_one_seg=~partial_rcpt, P_coff_use_tmcc=1, P_coff_use_ac=1
-		dib8000_write_word(state, 187,
-					(4 << 12) | (0 << 11) | (63 << 5) | (0x3 << 3) | ((~state->fe[0]->dtv_property_cache.isdbt_partial_reception & 1) << 2)
-					| 0x3);
-
-/*		// P_small_coef_ext_enable = 1 */
-/*		dib8000_write_word(state, 351, dib8000_read_word(state, 351) | 0x200); */
-
-		if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 0) {
-
-			// P_coff_winlen=63, P_coff_thres_lock=15, P_coff_one_seg_width= (P_mode == 3) , P_coff_one_seg_sym= (P_mode-1)
-			if (mode == 3)
-				dib8000_write_word(state, 180, 0x1fcf | ((mode - 1) << 14));
-			else
-				dib8000_write_word(state, 180, 0x0fcf | ((mode - 1) << 14));
-			// P_ctrl_corm_thres4pre_freq_inh=1,P_ctrl_pre_freq_mode_sat=1,
-			// P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 5, P_pre_freq_win_len=4
-			dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (5 << 5) | 4);
-			// P_ctrl_pre_freq_win_len=16, P_ctrl_pre_freq_thres_lockin=8
-			dib8000_write_word(state, 340, (16 << 6) | (8 << 0));
-			// P_ctrl_pre_freq_thres_lockout=6, P_small_use_tmcc/ac/cp=1
-			dib8000_write_word(state, 341, (6 << 3) | (1 << 2) | (1 << 1) | (1 << 0));
-
-			// P_coff_corthres_8k, 4k, 2k and P_coff_cpilthres_8k, 4k, 2k
-			dib8000_write_word(state, 181, 300);
-			dib8000_write_word(state, 182, 150);
-			dib8000_write_word(state, 183, 80);
-			dib8000_write_word(state, 184, 300);
-			dib8000_write_word(state, 185, 150);
-			dib8000_write_word(state, 186, 80);
-		} else {	// Sound Broadcasting mode 3 seg
-			// P_coff_one_seg_sym= 1, P_coff_one_seg_width= 1, P_coff_winlen=63, P_coff_thres_lock=15
-			/*	if (mode == 3) */
-			/*		dib8000_write_word(state, 180, 0x2fca | ((0) << 14)); */
-			/*	else */
-			/*		dib8000_write_word(state, 180, 0x2fca | ((1) << 14)); */
-			dib8000_write_word(state, 180, 0x1fcf | (1 << 14));
-
-			// P_ctrl_corm_thres4pre_freq_inh = 1, P_ctrl_pre_freq_mode_sat=1,
-			// P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 4, P_pre_freq_win_len=4
-			dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (4 << 5) | 4);
-			// P_ctrl_pre_freq_win_len=16, P_ctrl_pre_freq_thres_lockin=8
-			dib8000_write_word(state, 340, (16 << 6) | (8 << 0));
-			//P_ctrl_pre_freq_thres_lockout=6, P_small_use_tmcc/ac/cp=1
-			dib8000_write_word(state, 341, (6 << 3) | (1 << 2) | (1 << 1) | (1 << 0));
-
-			// P_coff_corthres_8k, 4k, 2k and P_coff_cpilthres_8k, 4k, 2k
-			dib8000_write_word(state, 181, 350);
-			dib8000_write_word(state, 182, 300);
-			dib8000_write_word(state, 183, 250);
-			dib8000_write_word(state, 184, 350);
-			dib8000_write_word(state, 185, 300);
-			dib8000_write_word(state, 186, 250);
-		}
-
-	} else if (state->isdbt_cfg_loaded == 0) {	// if not Sound Broadcasting mode : put default values for 13 segments
-		dib8000_write_word(state, 180, (16 << 6) | 9);
-		dib8000_write_word(state, 187, (4 << 12) | (8 << 5) | 0x2);
-		coff_pow = 0x2800;
-		for (i = 0; i < 6; i++)
-			dib8000_write_word(state, 181 + i, coff_pow);
-
-		// P_ctrl_corm_thres4pre_freq_inh=1, P_ctrl_pre_freq_mode_sat=1,
-		// P_ctrl_pre_freq_mode_sat=1, P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 3, P_pre_freq_win_len=1
-		dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (3 << 5) | 1);
-
-		// P_ctrl_pre_freq_win_len=8, P_ctrl_pre_freq_thres_lockin=6
-		dib8000_write_word(state, 340, (8 << 6) | (6 << 0));
-		// P_ctrl_pre_freq_thres_lockout=4, P_small_use_tmcc/ac/cp=1
-		dib8000_write_word(state, 341, (4 << 3) | (1 << 2) | (1 << 1) | (1 << 0));
-	}
-	// ---- FFT ----
-	if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1 && state->fe[0]->dtv_property_cache.isdbt_partial_reception == 0)
-		dib8000_write_word(state, 178, 64);	// P_fft_powrange=64
-	else
-		dib8000_write_word(state, 178, 32);	// P_fft_powrange=32
-
-	/* make the cpil_coff_lock more robust but slower p_coff_winlen
-	 * 6bits; p_coff_thres_lock 6bits (for coff lock if needed)
-	 */
-	/* if ( ( nbseg_diff>0)&&(nbseg_diff<13))
-		dib8000_write_word(state, 187, (dib8000_read_word(state, 187) & 0xfffb) | (1 << 3)); */
-
-	dib8000_write_word(state, 189, ~seg_mask13 | seg_diff_mask);	/* P_lmod4_seg_inh       */
-	dib8000_write_word(state, 192, ~seg_mask13 | seg_diff_mask);	/* P_pha3_seg_inh        */
-	dib8000_write_word(state, 225, ~seg_mask13 | seg_diff_mask);	/* P_tac_seg_inh         */
-	if ((!state->fe[0]->dtv_property_cache.isdbt_sb_mode) && (state->cfg.pll->ifreq == 0))
-		dib8000_write_word(state, 266, ~seg_mask13 | seg_diff_mask | 0x40);	/* P_equal_noise_seg_inh */
-	else
-		dib8000_write_word(state, 266, ~seg_mask13 | seg_diff_mask);	/* P_equal_noise_seg_inh */
-	dib8000_write_word(state, 287, ~seg_mask13 | 0x1000);	/* P_tmcc_seg_inh        */
-	//dib8000_write_word(state, 288, ~seg_mask13 | seg_diff_mask); /* P_tmcc_seg_eq_inh */
-	if (!autosearching)
-		dib8000_write_word(state, 288, (~seg_mask13 | seg_diff_mask) & 0x1fff);	/* P_tmcc_seg_eq_inh */
-	else
-		dib8000_write_word(state, 288, 0x1fff);	//disable equalisation of the tmcc when autosearch to be able to find the DQPSK channels.
-	dprintk("287 = %X (%d)", ~seg_mask13 | 0x1000, ~seg_mask13 | 0x1000);
-
-	dib8000_write_word(state, 211, seg_mask13 & (~seg_diff_mask));	/* P_des_seg_enabled     */
-
-	/* offset loop parameters */
-	if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1) {
-		if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 0)
-			/* P_timf_alpha = (11-P_mode), P_corm_alpha=6, P_corm_thres=0x80 */
-			dib8000_write_word(state, 32, ((11 - mode) << 12) | (6 << 8) | 0x40);
-
-		else		// Sound Broadcasting mode 3 seg
-			/* P_timf_alpha = (10-P_mode), P_corm_alpha=6, P_corm_thres=0x80 */
-			dib8000_write_word(state, 32, ((10 - mode) << 12) | (6 << 8) | 0x60);
-	} else
-		// TODO in 13 seg, timf_alpha can always be the same or not ?
-		/* P_timf_alpha = (9-P_mode, P_corm_alpha=6, P_corm_thres=0x80 */
-		dib8000_write_word(state, 32, ((9 - mode) << 12) | (6 << 8) | 0x80);
-
-	if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1) {
-		if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 0)
-			/* P_ctrl_pha_off_max=3   P_ctrl_sfreq_inh =0  P_ctrl_sfreq_step = (11-P_mode)  */
-			dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (10 - mode));
-
-		else		// Sound Broadcasting mode 3 seg
-			/* P_ctrl_pha_off_max=3   P_ctrl_sfreq_inh =0  P_ctrl_sfreq_step = (10-P_mode)  */
-			dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (9 - mode));
-	} else
-		/* P_ctrl_pha_off_max=3   P_ctrl_sfreq_inh =0  P_ctrl_sfreq_step = 9  */
-		dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (8 - mode));
-
-	/* P_dvsy_sync_wait - reuse mode */
-	switch (state->fe[0]->dtv_property_cache.transmission_mode) {
-	case TRANSMISSION_MODE_8K:
-		mode = 256;
-		break;
-	case TRANSMISSION_MODE_4K:
-		mode = 128;
-		break;
-	default:
-	case TRANSMISSION_MODE_2K:
-		mode = 64;
-		break;
-	}
-	if (state->cfg.diversity_delay == 0)
-		mode = (mode * (1 << (guard)) * 3) / 2 + 48;	// add 50% SFN margin + compensate for one DVSY-fifo
-	else
-		mode = (mode * (1 << (guard)) * 3) / 2 + state->cfg.diversity_delay;	// add 50% SFN margin + compensate for DVSY-fifo
-	mode <<= 4;
-	dib8000_write_word(state, 273, (dib8000_read_word(state, 273) & 0x000f) | mode);
-
-	/* channel estimation fine configuration */
-	switch (max_constellation) {
-	case QAM_64:
-		ana_gain = 0x7;	// -1 : avoid def_est saturation when ADC target is -16dB
-		coeff[0] = 0x0148;	/* P_adp_regul_cnt 0.04 */
-		coeff[1] = 0xfff0;	/* P_adp_noise_cnt -0.002 */
-		coeff[2] = 0x00a4;	/* P_adp_regul_ext 0.02 */
-		coeff[3] = 0xfff8;	/* P_adp_noise_ext -0.001 */
-		//if (!state->cfg.hostbus_diversity) //if diversity, we should prehaps use the configuration of the max_constallation -1
-		break;
-	case QAM_16:
-		ana_gain = 0x7;	// -1 : avoid def_est saturation when ADC target is -16dB
-		coeff[0] = 0x023d;	/* P_adp_regul_cnt 0.07 */
-		coeff[1] = 0xffdf;	/* P_adp_noise_cnt -0.004 */
-		coeff[2] = 0x00a4;	/* P_adp_regul_ext 0.02 */
-		coeff[3] = 0xfff0;	/* P_adp_noise_ext -0.002 */
-		//if (!((state->cfg.hostbus_diversity) && (max_constellation == QAM_16)))
-		break;
-	default:
-		ana_gain = 0;	// 0 : goes along with ADC target at -22dB to keep good mobile performance and lock at sensitivity level
-		coeff[0] = 0x099a;	/* P_adp_regul_cnt 0.3 */
-		coeff[1] = 0xffae;	/* P_adp_noise_cnt -0.01 */
-		coeff[2] = 0x0333;	/* P_adp_regul_ext 0.1 */
-		coeff[3] = 0xfff8;	/* P_adp_noise_ext -0.002 */
-		break;
-	}
-	for (mode = 0; mode < 4; mode++)
-		dib8000_write_word(state, 215 + mode, coeff[mode]);
-
-	// update ana_gain depending on max constellation
-	dib8000_write_word(state, 116, ana_gain);
-	// update ADC target depending on ana_gain
-	if (ana_gain) {		// set -16dB ADC target for ana_gain=-1
-		for (i = 0; i < 10; i++)
-			dib8000_write_word(state, 80 + i, adc_target_16dB[i]);
-	} else {		// set -22dB ADC target for ana_gain=0
-		for (i = 0; i < 10; i++)
-			dib8000_write_word(state, 80 + i, adc_target_16dB[i] - 355);
-	}
-
-	// ---- ANA_FE ----
-	if (state->fe[0]->dtv_property_cache.isdbt_sb_mode) {
-		if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 1)
-			ana_fe = ana_fe_coeff_3seg;
-		else		// 1-segment
-			ana_fe = ana_fe_coeff_1seg;
-	} else
-		ana_fe = ana_fe_coeff_13seg;
-
-	if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1 || state->isdbt_cfg_loaded == 0)
-		for (mode = 0; mode < 24; mode++)
-			dib8000_write_word(state, 117 + mode, ana_fe[mode]);
-
-	// ---- CHAN_BLK ----
-	for (i = 0; i < 13; i++) {
-		if ((((~seg_diff_mask) >> i) & 1) == 1) {
-			P_cfr_left_edge += (1 << i) * ((i == 0) || ((((seg_mask13 & (~seg_diff_mask)) >> (i - 1)) & 1) == 0));
-			P_cfr_right_edge += (1 << i) * ((i == 12) || ((((seg_mask13 & (~seg_diff_mask)) >> (i + 1)) & 1) == 0));
-		}
-	}
-	dib8000_write_word(state, 222, P_cfr_left_edge);	// P_cfr_left_edge
-	dib8000_write_word(state, 223, P_cfr_right_edge);	// P_cfr_right_edge
-	// "P_cspu_left_edge"  not used => do not care
-	// "P_cspu_right_edge" not used => do not care
-
-	if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1) {
-		dib8000_write_word(state, 228, 1);	// P_2d_mode_byp=1
-		dib8000_write_word(state, 205, dib8000_read_word(state, 205) & 0xfff0);	// P_cspu_win_cut = 0
-		if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 0
-			&& state->fe[0]->dtv_property_cache.transmission_mode == TRANSMISSION_MODE_2K) {
-			//dib8000_write_word(state, 219, dib8000_read_word(state, 219) & 0xfffe); // P_adp_pass = 0
-			dib8000_write_word(state, 265, 15);	// P_equal_noise_sel = 15
-		}
-	} else if (state->isdbt_cfg_loaded == 0) {
-		dib8000_write_word(state, 228, 0);	// default value
-		dib8000_write_word(state, 265, 31);	// default value
-		dib8000_write_word(state, 205, 0x200f);	// init value
-	}
-	// ---- TMCC ----
-	for (i = 0; i < 3; i++)
-		tmcc_pow +=
-			(((state->fe[0]->dtv_property_cache.layer[i].modulation == DQPSK) * 4 + 1) * state->fe[0]->dtv_property_cache.layer[i].segment_count);
-	// Quantif of "P_tmcc_dec_thres_?k" is (0, 5+mode, 9);
-	// Threshold is set at 1/4 of max power.
-	tmcc_pow *= (1 << (9 - 2));
-
-	dib8000_write_word(state, 290, tmcc_pow);	// P_tmcc_dec_thres_2k
-	dib8000_write_word(state, 291, tmcc_pow);	// P_tmcc_dec_thres_4k
-	dib8000_write_word(state, 292, tmcc_pow);	// P_tmcc_dec_thres_8k
-	//dib8000_write_word(state, 287, (1 << 13) | 0x1000 );
-	// ---- PHA3 ----
-
-	if (state->isdbt_cfg_loaded == 0)
-		dib8000_write_word(state, 250, 3285);	/*p_2d_hspeed_thr0 */
-
-	if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1)
-		state->isdbt_cfg_loaded = 0;
-	else
-		state->isdbt_cfg_loaded = 1;
-
-}
-
-static int dib8000_autosearch_start(struct dvb_frontend *fe)
-{
-	u8 factor;
-	u32 value;
-	struct dib8000_state *state = fe->demodulator_priv;
-
-	int slist = 0;
-
-	state->fe[0]->dtv_property_cache.inversion = 0;
-	if (!state->fe[0]->dtv_property_cache.isdbt_sb_mode)
-		state->fe[0]->dtv_property_cache.layer[0].segment_count = 13;
-	state->fe[0]->dtv_property_cache.layer[0].modulation = QAM_64;
-	state->fe[0]->dtv_property_cache.layer[0].fec = FEC_2_3;
-	state->fe[0]->dtv_property_cache.layer[0].interleaving = 0;
-
-	//choose the right list, in sb, always do everything
-	if (state->fe[0]->dtv_property_cache.isdbt_sb_mode) {
-		state->fe[0]->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K;
-		state->fe[0]->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8;
-		slist = 7;
-		dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13));
-	} else {
-		if (state->fe[0]->dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO) {
-			if (state->fe[0]->dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) {
-				slist = 7;
-				dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13));	// P_mode = 1 to have autosearch start ok with mode2
-			} else
-				slist = 3;
-		} else {
-			if (state->fe[0]->dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) {
-				slist = 2;
-				dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13));	// P_mode = 1
-			} else
-				slist = 0;
-		}
-
-		if (state->fe[0]->dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO)
-			state->fe[0]->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K;
-		if (state->fe[0]->dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO)
-			state->fe[0]->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8;
-
-		dprintk("using list for autosearch : %d", slist);
-		dib8000_set_channel(state, (unsigned char)slist, 1);
-		//dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13));  // P_mode = 1
-
-		factor = 1;
-
-		//set lock_mask values
-		dib8000_write_word(state, 6, 0x4);
-		dib8000_write_word(state, 7, 0x8);
-		dib8000_write_word(state, 8, 0x1000);
-
-		//set lock_mask wait time values
-		value = 50 * state->cfg.pll->internal * factor;
-		dib8000_write_word(state, 11, (u16) ((value >> 16) & 0xffff));	// lock0 wait time
-		dib8000_write_word(state, 12, (u16) (value & 0xffff));	// lock0 wait time
-		value = 100 * state->cfg.pll->internal * factor;
-		dib8000_write_word(state, 13, (u16) ((value >> 16) & 0xffff));	// lock1 wait time
-		dib8000_write_word(state, 14, (u16) (value & 0xffff));	// lock1 wait time
-		value = 1000 * state->cfg.pll->internal * factor;
-		dib8000_write_word(state, 15, (u16) ((value >> 16) & 0xffff));	// lock2 wait time
-		dib8000_write_word(state, 16, (u16) (value & 0xffff));	// lock2 wait time
-
-		value = dib8000_read_word(state, 0);
-		dib8000_write_word(state, 0, (u16) ((1 << 15) | value));
-		dib8000_read_word(state, 1284);	// reset the INT. n_irq_pending
-		dib8000_write_word(state, 0, (u16) value);
-
-	}
-
-	return 0;
-}
-
-static int dib8000_autosearch_irq(struct dvb_frontend *fe)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	u16 irq_pending = dib8000_read_word(state, 1284);
-
-	if (irq_pending & 0x1) {	// failed
-		dprintk("dib8000_autosearch_irq failed");
-		return 1;
-	}
-
-	if (irq_pending & 0x2) {	// succeeded
-		dprintk("dib8000_autosearch_irq succeeded");
-		return 2;
-	}
-
-	return 0;		// still pending
-}
-
-static int dib8000_tune(struct dvb_frontend *fe)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	int ret = 0;
-	u16 lock, value, mode;
-
-	// we are already tuned - just resuming from suspend
-	if (state == NULL)
-		return -EINVAL;
-
-	mode = fft_to_mode(state);
-
-	dib8000_set_bandwidth(fe, state->fe[0]->dtv_property_cache.bandwidth_hz / 1000);
-	dib8000_set_channel(state, 0, 0);
-
-	// restart demod
-	ret |= dib8000_write_word(state, 770, 0x4000);
-	ret |= dib8000_write_word(state, 770, 0x0000);
-	msleep(45);
-
-	/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3 */
-	/*  ret |= dib8000_write_word(state, 29, (0 << 9) | (4 << 5) | (0 << 4) | (3 << 0) );  workaround inh_isi stays at 1 */
-
-	// never achieved a lock before - wait for timfreq to update
-	if (state->timf == 0) {
-		if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1) {
-			if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 0)
-				msleep(300);
-			else	// Sound Broadcasting mode 3 seg
-				msleep(500);
-		} else		// 13 seg
-			msleep(200);
-	}
-	if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1) {
-		if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 0) {
-
-			/* P_timf_alpha = (13-P_mode) , P_corm_alpha=6, P_corm_thres=0x40  alpha to check on board */
-			dib8000_write_word(state, 32, ((13 - mode) << 12) | (6 << 8) | 0x40);
-			//dib8000_write_word(state, 32, (8 << 12) | (6 << 8) | 0x80);
-
-			/*  P_ctrl_sfreq_step= (12-P_mode)   P_ctrl_sfreq_inh =0     P_ctrl_pha_off_max  */
-			ret |= dib8000_write_word(state, 37, (12 - mode) | ((5 + mode) << 5));
-
-		} else {	// Sound Broadcasting mode 3 seg
-
-			/* P_timf_alpha = (12-P_mode) , P_corm_alpha=6, P_corm_thres=0x60  alpha to check on board */
-			dib8000_write_word(state, 32, ((12 - mode) << 12) | (6 << 8) | 0x60);
-
-			ret |= dib8000_write_word(state, 37, (11 - mode) | ((5 + mode) << 5));
-		}
-
-	} else {		// 13 seg
-		/* P_timf_alpha = 8 , P_corm_alpha=6, P_corm_thres=0x80  alpha to check on board */
-		dib8000_write_word(state, 32, ((11 - mode) << 12) | (6 << 8) | 0x80);
-
-		ret |= dib8000_write_word(state, 37, (10 - mode) | ((5 + mode) << 5));
-
-	}
-
-	// we achieved a coff_cpil_lock - it's time to update the timf
-	if (state->revision != 0x8090)
-		lock = dib8000_read_word(state, 568);
-	else
-		lock = dib8000_read_word(state, 570);
-	if ((lock >> 11) & 0x1)
-		dib8000_update_timf(state);
-
-	//now that tune is finished, lock0 should lock on fec_mpeg to output this lock on MP_LOCK. It's changed in autosearch start
-	dib8000_write_word(state, 6, 0x200);
-
-	if (state->revision == 0x8002) {
-		value = dib8000_read_word(state, 903);
-		dib8000_write_word(state, 903, value & ~(1 << 3));
-		msleep(1);
-		dib8000_write_word(state, 903, value | (1 << 3));
-	}
-
-	return ret;
-}
-
-static int dib8000_wakeup(struct dvb_frontend *fe)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	u8 index_frontend;
-	int ret;
-
-	dib8000_set_power_mode(state, DIB8000_POWER_ALL);
-	dib8000_set_adc_state(state, DIBX000_ADC_ON);
-	if (dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON) != 0)
-		dprintk("could not start Slow ADC");
-
-	if (state->revision != 0x8090)
-		dib8000_sad_calib(state);
-
-	for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
-		ret = state->fe[index_frontend]->ops.init(state->fe[index_frontend]);
-		if (ret < 0)
-			return ret;
-	}
-
-	return 0;
-}
-
-static int dib8000_sleep(struct dvb_frontend *fe)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	u8 index_frontend;
-	int ret;
-
-	for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
-		ret = state->fe[index_frontend]->ops.sleep(state->fe[index_frontend]);
-		if (ret < 0)
-			return ret;
-	}
-
-	if (state->revision != 0x8090)
-		dib8000_set_output_mode(fe, OUTMODE_HIGH_Z);
-	dib8000_set_power_mode(state, DIB8000_POWER_INTERFACE_ONLY);
-	return dib8000_set_adc_state(state, DIBX000_SLOW_ADC_OFF) | dib8000_set_adc_state(state, DIBX000_ADC_OFF);
-}
-
-enum frontend_tune_state dib8000_get_tune_state(struct dvb_frontend *fe)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	return state->tune_state;
-}
-EXPORT_SYMBOL(dib8000_get_tune_state);
-
-int dib8000_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	state->tune_state = tune_state;
-	return 0;
-}
-EXPORT_SYMBOL(dib8000_set_tune_state);
-
-static int dib8000_get_frontend(struct dvb_frontend *fe)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	u16 i, val = 0;
-	fe_status_t stat;
-	u8 index_frontend, sub_index_frontend;
-
-	fe->dtv_property_cache.bandwidth_hz = 6000000;
-
-	for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
-		state->fe[index_frontend]->ops.read_status(state->fe[index_frontend], &stat);
-		if (stat&FE_HAS_SYNC) {
-			dprintk("TMCC lock on the slave%i", index_frontend);
-			/* synchronize the cache with the other frontends */
-			state->fe[index_frontend]->ops.get_frontend(state->fe[index_frontend]);
-			for (sub_index_frontend = 0; (sub_index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[sub_index_frontend] != NULL); sub_index_frontend++) {
-				if (sub_index_frontend != index_frontend) {
-					state->fe[sub_index_frontend]->dtv_property_cache.isdbt_sb_mode = state->fe[index_frontend]->dtv_property_cache.isdbt_sb_mode;
-					state->fe[sub_index_frontend]->dtv_property_cache.inversion = state->fe[index_frontend]->dtv_property_cache.inversion;
-					state->fe[sub_index_frontend]->dtv_property_cache.transmission_mode = state->fe[index_frontend]->dtv_property_cache.transmission_mode;
-					state->fe[sub_index_frontend]->dtv_property_cache.guard_interval = state->fe[index_frontend]->dtv_property_cache.guard_interval;
-					state->fe[sub_index_frontend]->dtv_property_cache.isdbt_partial_reception = state->fe[index_frontend]->dtv_property_cache.isdbt_partial_reception;
-					for (i = 0; i < 3; i++) {
-						state->fe[sub_index_frontend]->dtv_property_cache.layer[i].segment_count = state->fe[index_frontend]->dtv_property_cache.layer[i].segment_count;
-						state->fe[sub_index_frontend]->dtv_property_cache.layer[i].interleaving = state->fe[index_frontend]->dtv_property_cache.layer[i].interleaving;
-						state->fe[sub_index_frontend]->dtv_property_cache.layer[i].fec = state->fe[index_frontend]->dtv_property_cache.layer[i].fec;
-						state->fe[sub_index_frontend]->dtv_property_cache.layer[i].modulation = state->fe[index_frontend]->dtv_property_cache.layer[i].modulation;
-					}
-				}
-			}
-			return 0;
-		}
-	}
-
-	fe->dtv_property_cache.isdbt_sb_mode = dib8000_read_word(state, 508) & 0x1;
-
-	if (state->revision == 0x8090)
-		val = dib8000_read_word(state, 572);
-	else
-		val = dib8000_read_word(state, 570);
-	fe->dtv_property_cache.inversion = (val & 0x40) >> 6;
-	switch ((val & 0x30) >> 4) {
-	case 1:
-		fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_2K;
-		break;
-	case 3:
-	default:
-		fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K;
-		break;
-	}
-
-	switch (val & 0x3) {
-	case 0:
-		fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_32;
-		dprintk("dib8000_get_frontend GI = 1/32 ");
-		break;
-	case 1:
-		fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_16;
-		dprintk("dib8000_get_frontend GI = 1/16 ");
-		break;
-	case 2:
-		dprintk("dib8000_get_frontend GI = 1/8 ");
-		fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8;
-		break;
-	case 3:
-		dprintk("dib8000_get_frontend GI = 1/4 ");
-		fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_4;
-		break;
-	}
-
-	val = dib8000_read_word(state, 505);
-	fe->dtv_property_cache.isdbt_partial_reception = val & 1;
-	dprintk("dib8000_get_frontend : partial_reception = %d ", fe->dtv_property_cache.isdbt_partial_reception);
-
-	for (i = 0; i < 3; i++) {
-		val = dib8000_read_word(state, 493 + i);
-		fe->dtv_property_cache.layer[i].segment_count = val & 0x0F;
-		dprintk("dib8000_get_frontend : Layer %d segments = %d ", i, fe->dtv_property_cache.layer[i].segment_count);
-
-		val = dib8000_read_word(state, 499 + i);
-		fe->dtv_property_cache.layer[i].interleaving = val & 0x3;
-		dprintk("dib8000_get_frontend : Layer %d time_intlv = %d ", i, fe->dtv_property_cache.layer[i].interleaving);
-
-		val = dib8000_read_word(state, 481 + i);
-		switch (val & 0x7) {
-		case 1:
-			fe->dtv_property_cache.layer[i].fec = FEC_1_2;
-			dprintk("dib8000_get_frontend : Layer %d Code Rate = 1/2 ", i);
-			break;
-		case 2:
-			fe->dtv_property_cache.layer[i].fec = FEC_2_3;
-			dprintk("dib8000_get_frontend : Layer %d Code Rate = 2/3 ", i);
-			break;
-		case 3:
-			fe->dtv_property_cache.layer[i].fec = FEC_3_4;
-			dprintk("dib8000_get_frontend : Layer %d Code Rate = 3/4 ", i);
-			break;
-		case 5:
-			fe->dtv_property_cache.layer[i].fec = FEC_5_6;
-			dprintk("dib8000_get_frontend : Layer %d Code Rate = 5/6 ", i);
-			break;
-		default:
-			fe->dtv_property_cache.layer[i].fec = FEC_7_8;
-			dprintk("dib8000_get_frontend : Layer %d Code Rate = 7/8 ", i);
-			break;
-		}
-
-		val = dib8000_read_word(state, 487 + i);
-		switch (val & 0x3) {
-		case 0:
-			dprintk("dib8000_get_frontend : Layer %d DQPSK ", i);
-			fe->dtv_property_cache.layer[i].modulation = DQPSK;
-			break;
-		case 1:
-			fe->dtv_property_cache.layer[i].modulation = QPSK;
-			dprintk("dib8000_get_frontend : Layer %d QPSK ", i);
-			break;
-		case 2:
-			fe->dtv_property_cache.layer[i].modulation = QAM_16;
-			dprintk("dib8000_get_frontend : Layer %d QAM16 ", i);
-			break;
-		case 3:
-		default:
-			dprintk("dib8000_get_frontend : Layer %d QAM64 ", i);
-			fe->dtv_property_cache.layer[i].modulation = QAM_64;
-			break;
-		}
-	}
-
-	/* synchronize the cache with the other frontends */
-	for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
-		state->fe[index_frontend]->dtv_property_cache.isdbt_sb_mode = fe->dtv_property_cache.isdbt_sb_mode;
-		state->fe[index_frontend]->dtv_property_cache.inversion = fe->dtv_property_cache.inversion;
-		state->fe[index_frontend]->dtv_property_cache.transmission_mode = fe->dtv_property_cache.transmission_mode;
-		state->fe[index_frontend]->dtv_property_cache.guard_interval = fe->dtv_property_cache.guard_interval;
-		state->fe[index_frontend]->dtv_property_cache.isdbt_partial_reception = fe->dtv_property_cache.isdbt_partial_reception;
-		for (i = 0; i < 3; i++) {
-			state->fe[index_frontend]->dtv_property_cache.layer[i].segment_count = fe->dtv_property_cache.layer[i].segment_count;
-			state->fe[index_frontend]->dtv_property_cache.layer[i].interleaving = fe->dtv_property_cache.layer[i].interleaving;
-			state->fe[index_frontend]->dtv_property_cache.layer[i].fec = fe->dtv_property_cache.layer[i].fec;
-			state->fe[index_frontend]->dtv_property_cache.layer[i].modulation = fe->dtv_property_cache.layer[i].modulation;
-		}
-	}
-	return 0;
-}
-
-static int dib8000_set_frontend(struct dvb_frontend *fe)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	u8 nbr_pending, exit_condition, index_frontend;
-	s8 index_frontend_success = -1;
-	int time, ret;
-	int  time_slave = FE_CALLBACK_TIME_NEVER;
-
-	if (state->fe[0]->dtv_property_cache.frequency == 0) {
-		dprintk("dib8000: must at least specify frequency ");
-		return 0;
-	}
-
-	if (state->fe[0]->dtv_property_cache.bandwidth_hz == 0) {
-		dprintk("dib8000: no bandwidth specified, set to default ");
-		state->fe[0]->dtv_property_cache.bandwidth_hz = 6000000;
-	}
-
-	for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
-		/* synchronization of the cache */
-		state->fe[index_frontend]->dtv_property_cache.delivery_system = SYS_ISDBT;
-		memcpy(&state->fe[index_frontend]->dtv_property_cache, &fe->dtv_property_cache, sizeof(struct dtv_frontend_properties));
-
-		if (state->revision != 0x8090)
-			dib8000_set_output_mode(state->fe[index_frontend],
-					OUTMODE_HIGH_Z);
-		else
-			dib8096p_set_output_mode(state->fe[index_frontend],
-					OUTMODE_HIGH_Z);
-		if (state->fe[index_frontend]->ops.tuner_ops.set_params)
-			state->fe[index_frontend]->ops.tuner_ops.set_params(state->fe[index_frontend]);
-
-		dib8000_set_tune_state(state->fe[index_frontend], CT_AGC_START);
-	}
-
-	/* start up the AGC */
-	do {
-		time = dib8000_agc_startup(state->fe[0]);
-		for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
-			time_slave = dib8000_agc_startup(state->fe[index_frontend]);
-			if (time == FE_CALLBACK_TIME_NEVER)
-				time = time_slave;
-			else if ((time_slave != FE_CALLBACK_TIME_NEVER) && (time_slave > time))
-				time = time_slave;
-		}
-		if (time != FE_CALLBACK_TIME_NEVER)
-			msleep(time / 10);
-		else
-			break;
-		exit_condition = 1;
-		for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
-			if (dib8000_get_tune_state(state->fe[index_frontend]) != CT_AGC_STOP) {
-				exit_condition = 0;
-				break;
-			}
-		}
-	} while (exit_condition == 0);
-
-	for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++)
-		dib8000_set_tune_state(state->fe[index_frontend], CT_DEMOD_START);
-
-	if ((state->fe[0]->dtv_property_cache.delivery_system != SYS_ISDBT) ||
-			(state->fe[0]->dtv_property_cache.inversion == INVERSION_AUTO) ||
-			(state->fe[0]->dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) ||
-			(state->fe[0]->dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO) ||
-			(((state->fe[0]->dtv_property_cache.isdbt_layer_enabled & (1 << 0)) != 0) &&
-			 (state->fe[0]->dtv_property_cache.layer[0].segment_count != 0xff) &&
-			 (state->fe[0]->dtv_property_cache.layer[0].segment_count != 0) &&
-			 ((state->fe[0]->dtv_property_cache.layer[0].modulation == QAM_AUTO) ||
-			  (state->fe[0]->dtv_property_cache.layer[0].fec == FEC_AUTO))) ||
-			(((state->fe[0]->dtv_property_cache.isdbt_layer_enabled & (1 << 1)) != 0) &&
-			 (state->fe[0]->dtv_property_cache.layer[1].segment_count != 0xff) &&
-			 (state->fe[0]->dtv_property_cache.layer[1].segment_count != 0) &&
-			 ((state->fe[0]->dtv_property_cache.layer[1].modulation == QAM_AUTO) ||
-			  (state->fe[0]->dtv_property_cache.layer[1].fec == FEC_AUTO))) ||
-			(((state->fe[0]->dtv_property_cache.isdbt_layer_enabled & (1 << 2)) != 0) &&
-			 (state->fe[0]->dtv_property_cache.layer[2].segment_count != 0xff) &&
-			 (state->fe[0]->dtv_property_cache.layer[2].segment_count != 0) &&
-			 ((state->fe[0]->dtv_property_cache.layer[2].modulation == QAM_AUTO) ||
-			  (state->fe[0]->dtv_property_cache.layer[2].fec == FEC_AUTO))) ||
-			(((state->fe[0]->dtv_property_cache.layer[0].segment_count == 0) ||
-			  ((state->fe[0]->dtv_property_cache.isdbt_layer_enabled & (1 << 0)) == 0)) &&
-			 ((state->fe[0]->dtv_property_cache.layer[1].segment_count == 0) ||
-			  ((state->fe[0]->dtv_property_cache.isdbt_layer_enabled & (2 << 0)) == 0)) &&
-			 ((state->fe[0]->dtv_property_cache.layer[2].segment_count == 0) || ((state->fe[0]->dtv_property_cache.isdbt_layer_enabled & (3 << 0)) == 0)))) {
-		int i = 100;
-		u8 found = 0;
-		u8 tune_failed = 0;
-
-		for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
-			dib8000_set_bandwidth(state->fe[index_frontend], fe->dtv_property_cache.bandwidth_hz / 1000);
-			dib8000_autosearch_start(state->fe[index_frontend]);
-		}
-
-		do {
-			msleep(20);
-			nbr_pending = 0;
-			exit_condition = 0; /* 0: tune pending; 1: tune failed; 2:tune success */
-			for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
-				if (((tune_failed >> index_frontend) & 0x1) == 0) {
-					found = dib8000_autosearch_irq(state->fe[index_frontend]);
-					switch (found) {
-					case 0: /* tune pending */
-						 nbr_pending++;
-						 break;
-					case 2:
-						 dprintk("autosearch succeed on the frontend%i", index_frontend);
-						 exit_condition = 2;
-						 index_frontend_success = index_frontend;
-						 break;
-					default:
-						 dprintk("unhandled autosearch result");
-					case 1:
-						 tune_failed |= (1 << index_frontend);
-						 dprintk("autosearch failed for the frontend%i", index_frontend);
-						 break;
-					}
-				}
-			}
-
-			/* if all tune are done and no success, exit: tune failed */
-			if ((nbr_pending == 0) && (exit_condition == 0))
-				exit_condition = 1;
-		} while ((exit_condition == 0) && i--);
-
-		if (exit_condition == 1) { /* tune failed */
-			dprintk("tune failed");
-			return 0;
-		}
-
-		dprintk("tune success on frontend%i", index_frontend_success);
-
-		dib8000_get_frontend(fe);
-	}
-
-	for (index_frontend = 0, ret = 0; (ret >= 0) && (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++)
-		ret = dib8000_tune(state->fe[index_frontend]);
-
-	/* set output mode and diversity input */
-	if (state->revision != 0x8090) {
-		dib8000_set_output_mode(state->fe[0], state->cfg.output_mode);
-		for (index_frontend = 1;
-				(index_frontend < MAX_NUMBER_OF_FRONTENDS) &&
-				(state->fe[index_frontend] != NULL);
-				index_frontend++) {
-			dib8000_set_output_mode(state->fe[index_frontend],
-					OUTMODE_DIVERSITY);
-			dib8000_set_diversity_in(state->fe[index_frontend-1], 1);
-		}
-
-		/* turn off the diversity of the last chip */
-		dib8000_set_diversity_in(state->fe[index_frontend-1], 0);
-	} else {
-		dib8096p_set_output_mode(state->fe[0], state->cfg.output_mode);
-		if (state->cfg.enMpegOutput == 0) {
-			dib8096p_setDibTxMux(state, MPEG_ON_DIBTX);
-			dib8096p_setHostBusMux(state, DIBTX_ON_HOSTBUS);
-		}
-		for (index_frontend = 1;
-				(index_frontend < MAX_NUMBER_OF_FRONTENDS) &&
-				(state->fe[index_frontend] != NULL);
-				index_frontend++) {
-			dib8096p_set_output_mode(state->fe[index_frontend],
-					OUTMODE_DIVERSITY);
-			dib8096p_set_diversity_in(state->fe[index_frontend-1], 1);
-		}
-
-		/* turn off the diversity of the last chip */
-		dib8096p_set_diversity_in(state->fe[index_frontend-1], 0);
-	}
-
-	return ret;
-}
-
-static u16 dib8000_read_lock(struct dvb_frontend *fe)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-
-	if (state->revision == 0x8090)
-		return dib8000_read_word(state, 570);
-	return dib8000_read_word(state, 568);
-}
-
-static int dib8000_read_status(struct dvb_frontend *fe, fe_status_t * stat)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	u16 lock_slave = 0, lock;
-	u8 index_frontend;
-
-	if (state->revision == 0x8090)
-		lock = dib8000_read_word(state, 570);
-	else
-		lock = dib8000_read_word(state, 568);
-
-	for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++)
-		lock_slave |= dib8000_read_lock(state->fe[index_frontend]);
-
-	*stat = 0;
-
-	if (((lock >> 13) & 1) || ((lock_slave >> 13) & 1))
-		*stat |= FE_HAS_SIGNAL;
-
-	if (((lock >> 8) & 1) || ((lock_slave >> 8) & 1)) /* Equal */
-		*stat |= FE_HAS_CARRIER;
-
-	if ((((lock >> 1) & 0xf) == 0xf) || (((lock_slave >> 1) & 0xf) == 0xf)) /* TMCC_SYNC */
-		*stat |= FE_HAS_SYNC;
-
-	if ((((lock >> 12) & 1) || ((lock_slave >> 12) & 1)) && ((lock >> 5) & 7)) /* FEC MPEG */
-		*stat |= FE_HAS_LOCK;
-
-	if (((lock >> 12) & 1) || ((lock_slave >> 12) & 1)) {
-		lock = dib8000_read_word(state, 554); /* Viterbi Layer A */
-		if (lock & 0x01)
-			*stat |= FE_HAS_VITERBI;
-
-		lock = dib8000_read_word(state, 555); /* Viterbi Layer B */
-		if (lock & 0x01)
-			*stat |= FE_HAS_VITERBI;
-
-		lock = dib8000_read_word(state, 556); /* Viterbi Layer C */
-		if (lock & 0x01)
-			*stat |= FE_HAS_VITERBI;
-	}
-
-	return 0;
-}
-
-static int dib8000_read_ber(struct dvb_frontend *fe, u32 * ber)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-
-	/* 13 segments */
-	if (state->revision == 0x8090)
-		*ber = (dib8000_read_word(state, 562) << 16) |
-			dib8000_read_word(state, 563);
-	else
-		*ber = (dib8000_read_word(state, 560) << 16) |
-			dib8000_read_word(state, 561);
-	return 0;
-}
-
-static int dib8000_read_unc_blocks(struct dvb_frontend *fe, u32 * unc)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-
-	/* packet error on 13 seg */
-	if (state->revision == 0x8090)
-		*unc = dib8000_read_word(state, 567);
-	else
-		*unc = dib8000_read_word(state, 565);
-	return 0;
-}
-
-static int dib8000_read_signal_strength(struct dvb_frontend *fe, u16 * strength)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	u8 index_frontend;
-	u16 val;
-
-	*strength = 0;
-	for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
-		state->fe[index_frontend]->ops.read_signal_strength(state->fe[index_frontend], &val);
-		if (val > 65535 - *strength)
-			*strength = 65535;
-		else
-			*strength += val;
-	}
-
-	val = 65535 - dib8000_read_word(state, 390);
-	if (val > 65535 - *strength)
-		*strength = 65535;
-	else
-		*strength += val;
-	return 0;
-}
-
-static u32 dib8000_get_snr(struct dvb_frontend *fe)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	u32 n, s, exp;
-	u16 val;
-
-	if (state->revision != 0x8090)
-		val = dib8000_read_word(state, 542);
-	else
-		val = dib8000_read_word(state, 544);
-	n = (val >> 6) & 0xff;
-	exp = (val & 0x3f);
-	if ((exp & 0x20) != 0)
-		exp -= 0x40;
-	n <<= exp+16;
-
-	if (state->revision != 0x8090)
-		val = dib8000_read_word(state, 543);
-	else
-		val = dib8000_read_word(state, 545);
-	s = (val >> 6) & 0xff;
-	exp = (val & 0x3f);
-	if ((exp & 0x20) != 0)
-		exp -= 0x40;
-	s <<= exp+16;
-
-	if (n > 0) {
-		u32 t = (s/n) << 16;
-		return t + ((s << 16) - n*t) / n;
-	}
-	return 0xffffffff;
-}
-
-static int dib8000_read_snr(struct dvb_frontend *fe, u16 * snr)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	u8 index_frontend;
-	u32 snr_master;
-
-	snr_master = dib8000_get_snr(fe);
-	for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++)
-		snr_master += dib8000_get_snr(state->fe[index_frontend]);
-
-	if ((snr_master >> 16) != 0) {
-		snr_master = 10*intlog10(snr_master>>16);
-		*snr = snr_master / ((1 << 24) / 10);
-	}
-	else
-		*snr = 0;
-
-	return 0;
-}
-
-int dib8000_set_slave_frontend(struct dvb_frontend *fe, struct dvb_frontend *fe_slave)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	u8 index_frontend = 1;
-
-	while ((index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL))
-		index_frontend++;
-	if (index_frontend < MAX_NUMBER_OF_FRONTENDS) {
-		dprintk("set slave fe %p to index %i", fe_slave, index_frontend);
-		state->fe[index_frontend] = fe_slave;
-		return 0;
-	}
-
-	dprintk("too many slave frontend");
-	return -ENOMEM;
-}
-EXPORT_SYMBOL(dib8000_set_slave_frontend);
-
-int dib8000_remove_slave_frontend(struct dvb_frontend *fe)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-	u8 index_frontend = 1;
-
-	while ((index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL))
-		index_frontend++;
-	if (index_frontend != 1) {
-		dprintk("remove slave fe %p (index %i)", state->fe[index_frontend-1], index_frontend-1);
-		state->fe[index_frontend] = NULL;
-		return 0;
-	}
-
-	dprintk("no frontend to be removed");
-	return -ENODEV;
-}
-EXPORT_SYMBOL(dib8000_remove_slave_frontend);
-
-struct dvb_frontend *dib8000_get_slave_frontend(struct dvb_frontend *fe, int slave_index)
-{
-	struct dib8000_state *state = fe->demodulator_priv;
-
-	if (slave_index >= MAX_NUMBER_OF_FRONTENDS)
-		return NULL;
-	return state->fe[slave_index];
-}
-EXPORT_SYMBOL(dib8000_get_slave_frontend);
-
-
-int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods,
-		u8 default_addr, u8 first_addr, u8 is_dib8096p)
-{
-	int k = 0, ret = 0;
-	u8 new_addr = 0;
-	struct i2c_device client = {.adap = host };
-
-	client.i2c_write_buffer = kzalloc(4 * sizeof(u8), GFP_KERNEL);
-	if (!client.i2c_write_buffer) {
-		dprintk("%s: not enough memory", __func__);
-		return -ENOMEM;
-	}
-	client.i2c_read_buffer = kzalloc(4 * sizeof(u8), GFP_KERNEL);
-	if (!client.i2c_read_buffer) {
-		dprintk("%s: not enough memory", __func__);
-		ret = -ENOMEM;
-		goto error_memory_read;
-	}
-	client.i2c_buffer_lock = kzalloc(sizeof(struct mutex), GFP_KERNEL);
-	if (!client.i2c_buffer_lock) {
-		dprintk("%s: not enough memory", __func__);
-		ret = -ENOMEM;
-		goto error_memory_lock;
-	}
-	mutex_init(client.i2c_buffer_lock);
-
-	for (k = no_of_demods - 1; k >= 0; k--) {
-		/* designated i2c address */
-		new_addr = first_addr + (k << 1);
-
-		client.addr = new_addr;
-		if (!is_dib8096p)
-			dib8000_i2c_write16(&client, 1287, 0x0003);	/* sram lead in, rdy */
-		if (dib8000_identify(&client) == 0) {
-			/* sram lead in, rdy */
-			if (!is_dib8096p)
-				dib8000_i2c_write16(&client, 1287, 0x0003);
-			client.addr = default_addr;
-			if (dib8000_identify(&client) == 0) {
-				dprintk("#%d: not identified", k);
-				ret  = -EINVAL;
-				goto error;
-			}
-		}
-
-		/* start diversity to pull_down div_str - just for i2c-enumeration */
-		dib8000_i2c_write16(&client, 1286, (1 << 10) | (4 << 6));
-
-		/* set new i2c address and force divstart */
-		dib8000_i2c_write16(&client, 1285, (new_addr << 2) | 0x2);
-		client.addr = new_addr;
-		dib8000_identify(&client);
-
-		dprintk("IC %d initialized (to i2c_address 0x%x)", k, new_addr);
-	}
-
-	for (k = 0; k < no_of_demods; k++) {
-		new_addr = first_addr | (k << 1);
-		client.addr = new_addr;
-
-		// unforce divstr
-		dib8000_i2c_write16(&client, 1285, new_addr << 2);
-
-		/* deactivate div - it was just for i2c-enumeration */
-		dib8000_i2c_write16(&client, 1286, 0);
-	}
-
-error:
-	kfree(client.i2c_buffer_lock);
-error_memory_lock:
-	kfree(client.i2c_read_buffer);
-error_memory_read:
-	kfree(client.i2c_write_buffer);
-
-	return ret;
-}
-
-EXPORT_SYMBOL(dib8000_i2c_enumeration);
-static int dib8000_fe_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *tune)
-{
-	tune->min_delay_ms = 1000;
-	tune->step_size = 0;
-	tune->max_drift = 0;
-	return 0;
-}
-
-static void dib8000_release(struct dvb_frontend *fe)
-{
-	struct dib8000_state *st = fe->demodulator_priv;
-	u8 index_frontend;
-
-	for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (st->fe[index_frontend] != NULL); index_frontend++)
-		dvb_frontend_detach(st->fe[index_frontend]);
-
-	dibx000_exit_i2c_master(&st->i2c_master);
-	i2c_del_adapter(&st->dib8096p_tuner_adap);
-	kfree(st->fe[0]);
-	kfree(st);
-}
-
-struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface intf, int gating)
-{
-	struct dib8000_state *st = fe->demodulator_priv;
-	return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating);
-}
-
-EXPORT_SYMBOL(dib8000_get_i2c_master);
-
-int dib8000_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff)
-{
-	struct dib8000_state *st = fe->demodulator_priv;
-	u16 val = dib8000_read_word(st, 299) & 0xffef;
-	val |= (onoff & 0x1) << 4;
-
-	dprintk("pid filter enabled %d", onoff);
-	return dib8000_write_word(st, 299, val);
-}
-EXPORT_SYMBOL(dib8000_pid_filter_ctrl);
-
-int dib8000_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff)
-{
-	struct dib8000_state *st = fe->demodulator_priv;
-	dprintk("Index %x, PID %d, OnOff %d", id, pid, onoff);
-	return dib8000_write_word(st, 305 + id, onoff ? (1 << 13) | pid : 0);
-}
-EXPORT_SYMBOL(dib8000_pid_filter);
-
-static const struct dvb_frontend_ops dib8000_ops = {
-	.delsys = { SYS_ISDBT },
-	.info = {
-		 .name = "DiBcom 8000 ISDB-T",
-		 .frequency_min = 44250000,
-		 .frequency_max = 867250000,
-		 .frequency_stepsize = 62500,
-		 .caps = FE_CAN_INVERSION_AUTO |
-		 FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-		 FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-		 FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-		 FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER | FE_CAN_HIERARCHY_AUTO,
-		 },
-
-	.release = dib8000_release,
-
-	.init = dib8000_wakeup,
-	.sleep = dib8000_sleep,
-
-	.set_frontend = dib8000_set_frontend,
-	.get_tune_settings = dib8000_fe_get_tune_settings,
-	.get_frontend = dib8000_get_frontend,
-
-	.read_status = dib8000_read_status,
-	.read_ber = dib8000_read_ber,
-	.read_signal_strength = dib8000_read_signal_strength,
-	.read_snr = dib8000_read_snr,
-	.read_ucblocks = dib8000_read_unc_blocks,
-};
-
-struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg)
-{
-	struct dvb_frontend *fe;
-	struct dib8000_state *state;
-
-	dprintk("dib8000_attach");
-
-	state = kzalloc(sizeof(struct dib8000_state), GFP_KERNEL);
-	if (state == NULL)
-		return NULL;
-	fe = kzalloc(sizeof(struct dvb_frontend), GFP_KERNEL);
-	if (fe == NULL)
-		goto error;
-
-	memcpy(&state->cfg, cfg, sizeof(struct dib8000_config));
-	state->i2c.adap = i2c_adap;
-	state->i2c.addr = i2c_addr;
-	state->i2c.i2c_write_buffer = state->i2c_write_buffer;
-	state->i2c.i2c_read_buffer = state->i2c_read_buffer;
-	mutex_init(&state->i2c_buffer_lock);
-	state->i2c.i2c_buffer_lock = &state->i2c_buffer_lock;
-	state->gpio_val = cfg->gpio_val;
-	state->gpio_dir = cfg->gpio_dir;
-
-	/* Ensure the output mode remains at the previous default if it's
-	 * not specifically set by the caller.
-	 */
-	if ((state->cfg.output_mode != OUTMODE_MPEG2_SERIAL) && (state->cfg.output_mode != OUTMODE_MPEG2_PAR_GATED_CLK))
-		state->cfg.output_mode = OUTMODE_MPEG2_FIFO;
-
-	state->fe[0] = fe;
-	fe->demodulator_priv = state;
-	memcpy(&state->fe[0]->ops, &dib8000_ops, sizeof(struct dvb_frontend_ops));
-
-	state->timf_default = cfg->pll->timf;
-
-	if (dib8000_identify(&state->i2c) == 0)
-		goto error;
-
-	dibx000_init_i2c_master(&state->i2c_master, DIB8000, state->i2c.adap, state->i2c.addr);
-
-	/* init 8096p tuner adapter */
-	strncpy(state->dib8096p_tuner_adap.name, "DiB8096P tuner interface",
-			sizeof(state->dib8096p_tuner_adap.name));
-	state->dib8096p_tuner_adap.algo = &dib8096p_tuner_xfer_algo;
-	state->dib8096p_tuner_adap.algo_data = NULL;
-	state->dib8096p_tuner_adap.dev.parent = state->i2c.adap->dev.parent;
-	i2c_set_adapdata(&state->dib8096p_tuner_adap, state);
-	i2c_add_adapter(&state->dib8096p_tuner_adap);
-
-	dib8000_reset(fe);
-
-	dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & ~0x60) | (3 << 5));	/* ber_rs_len = 3 */
-
-	return fe;
-
- error:
-	kfree(state);
-	return NULL;
-}
-
-EXPORT_SYMBOL(dib8000_attach);
-
-MODULE_AUTHOR("Olivier Grenie <Olivier.Grenie@dibcom.fr, " "Patrick Boettcher <pboettcher@dibcom.fr>");
-MODULE_DESCRIPTION("Driver for the DiBcom 8000 ISDB-T demodulator");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/dib8000.h b/drivers/media/dvb/frontends/dib8000.h
deleted file mode 100644
index 39591bb..0000000
--- a/drivers/media/dvb/frontends/dib8000.h
+++ /dev/null
@@ -1,174 +0,0 @@
-#ifndef DIB8000_H
-#define DIB8000_H
-
-#include "dibx000_common.h"
-
-struct dib8000_config {
-	u8 output_mpeg2_in_188_bytes;
-	u8 hostbus_diversity;
-	u8 tuner_is_baseband;
-	int (*update_lna) (struct dvb_frontend *, u16 agc_global);
-
-	u8 agc_config_count;
-	struct dibx000_agc_config *agc;
-	struct dibx000_bandwidth_config *pll;
-
-#define DIB8000_GPIO_DEFAULT_DIRECTIONS 0xffff
-	u16 gpio_dir;
-#define DIB8000_GPIO_DEFAULT_VALUES     0x0000
-	u16 gpio_val;
-#define DIB8000_GPIO_PWM_POS0(v)        ((v & 0xf) << 12)
-#define DIB8000_GPIO_PWM_POS1(v)        ((v & 0xf) << 8 )
-#define DIB8000_GPIO_PWM_POS2(v)        ((v & 0xf) << 4 )
-#define DIB8000_GPIO_PWM_POS3(v)         (v & 0xf)
-#define DIB8000_GPIO_DEFAULT_PWM_POS    0xffff
-	u16 gpio_pwm_pos;
-	u16 pwm_freq_div;
-
-	void (*agc_control) (struct dvb_frontend *, u8 before);
-
-	u16 drives;
-	u16 diversity_delay;
-	u8 div_cfg;
-	u8 output_mode;
-	u8 refclksel;
-	u8 enMpegOutput:1;
-};
-
-#define DEFAULT_DIB8000_I2C_ADDRESS 18
-
-#if defined(CONFIG_DVB_DIB8000) || (defined(CONFIG_DVB_DIB8000_MODULE) && defined(MODULE))
-extern struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg);
-extern struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int);
-
-extern int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods,
-		u8 default_addr, u8 first_addr, u8 is_dib8096p);
-
-extern int dib8000_set_gpio(struct dvb_frontend *, u8 num, u8 dir, u8 val);
-extern int dib8000_set_wbd_ref(struct dvb_frontend *, u16 value);
-extern int dib8000_pid_filter_ctrl(struct dvb_frontend *, u8 onoff);
-extern int dib8000_pid_filter(struct dvb_frontend *, u8 id, u16 pid, u8 onoff);
-extern int dib8000_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state);
-extern enum frontend_tune_state dib8000_get_tune_state(struct dvb_frontend *fe);
-extern void dib8000_pwm_agc_reset(struct dvb_frontend *fe);
-extern s32 dib8000_get_adc_power(struct dvb_frontend *fe, u8 mode);
-extern struct i2c_adapter *dib8096p_get_i2c_tuner(struct dvb_frontend *fe);
-extern int dib8096p_tuner_sleep(struct dvb_frontend *fe, int onoff);
-extern int dib8090p_get_dc_power(struct dvb_frontend *fe, u8 IQ);
-extern u32 dib8000_ctrl_timf(struct dvb_frontend *fe,
-		uint8_t op, uint32_t timf);
-extern int dib8000_update_pll(struct dvb_frontend *fe,
-		struct dibx000_bandwidth_config *pll);
-extern int dib8000_set_slave_frontend(struct dvb_frontend *fe, struct dvb_frontend *fe_slave);
-extern int dib8000_remove_slave_frontend(struct dvb_frontend *fe);
-extern struct dvb_frontend *dib8000_get_slave_frontend(struct dvb_frontend *fe, int slave_index);
-#else
-static inline struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-static inline struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface i, int x)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-static inline int dib8000_i2c_enumeration(struct i2c_adapter *host,
-		int no_of_demods, u8 default_addr, u8 first_addr,
-		u8 is_dib8096p)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib8000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib8000_set_wbd_ref(struct dvb_frontend *fe, u16 value)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib8000_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib8000_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-static inline int dib8000_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-static inline enum frontend_tune_state dib8000_get_tune_state(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return CT_SHUTDOWN;
-}
-static inline void dib8000_pwm_agc_reset(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-}
-static inline struct i2c_adapter *dib8096p_get_i2c_tuner(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-static inline int dib8096p_tuner_sleep(struct dvb_frontend *fe, int onoff)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return 0;
-}
-static inline s32 dib8000_get_adc_power(struct dvb_frontend *fe, u8 mode)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return 0;
-}
-static inline int dib8090p_get_dc_power(struct dvb_frontend *fe, u8 IQ)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return 0;
-}
-static inline u32 dib8000_ctrl_timf(struct dvb_frontend *fe,
-		uint8_t op, uint32_t timf)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return 0;
-}
-static inline int dib8000_update_pll(struct dvb_frontend *fe,
-		struct dibx000_bandwidth_config *pll)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-static inline int dib8000_set_slave_frontend(struct dvb_frontend *fe, struct dvb_frontend *fe_slave)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-int dib8000_remove_slave_frontend(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline struct dvb_frontend *dib8000_get_slave_frontend(struct dvb_frontend *fe, int slave_index)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif
diff --git a/drivers/media/dvb/frontends/dib9000.c b/drivers/media/dvb/frontends/dib9000.c
deleted file mode 100644
index 6201c59..0000000
--- a/drivers/media/dvb/frontends/dib9000.c
+++ /dev/null
@@ -1,2590 +0,0 @@
-/*
- * Linux-DVB Driver for DiBcom's DiB9000 and demodulator-family.
- *
- * Copyright (C) 2005-10 DiBcom (http://www.dibcom.fr/)
- *
- * This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- */
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-
-#include "dvb_math.h"
-#include "dvb_frontend.h"
-
-#include "dib9000.h"
-#include "dibx000_common.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
-
-#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB9000: "); printk(args); printk("\n"); } } while (0)
-#define MAX_NUMBER_OF_FRONTENDS 6
-
-struct i2c_device {
-	struct i2c_adapter *i2c_adap;
-	u8 i2c_addr;
-	u8 *i2c_read_buffer;
-	u8 *i2c_write_buffer;
-};
-
-struct dib9000_pid_ctrl {
-#define DIB9000_PID_FILTER_CTRL 0
-#define DIB9000_PID_FILTER      1
-	u8 cmd;
-	u8 id;
-	u16 pid;
-	u8 onoff;
-};
-
-struct dib9000_state {
-	struct i2c_device i2c;
-
-	struct dibx000_i2c_master i2c_master;
-	struct i2c_adapter tuner_adap;
-	struct i2c_adapter component_bus;
-
-	u16 revision;
-	u8 reg_offs;
-
-	enum frontend_tune_state tune_state;
-	u32 status;
-	struct dvb_frontend_parametersContext channel_status;
-
-	u8 fe_id;
-
-#define DIB9000_GPIO_DEFAULT_DIRECTIONS 0xffff
-	u16 gpio_dir;
-#define DIB9000_GPIO_DEFAULT_VALUES     0x0000
-	u16 gpio_val;
-#define DIB9000_GPIO_DEFAULT_PWM_POS    0xffff
-	u16 gpio_pwm_pos;
-
-	union {			/* common for all chips */
-		struct {
-			u8 mobile_mode:1;
-		} host;
-
-		struct {
-			struct dib9000_fe_memory_map {
-				u16 addr;
-				u16 size;
-			} fe_mm[18];
-			u8 memcmd;
-
-			struct mutex mbx_if_lock;	/* to protect read/write operations */
-			struct mutex mbx_lock;	/* to protect the whole mailbox handling */
-
-			struct mutex mem_lock;	/* to protect the memory accesses */
-			struct mutex mem_mbx_lock;	/* to protect the memory-based mailbox */
-
-#define MBX_MAX_WORDS (256 - 200 - 2)
-#define DIB9000_MSG_CACHE_SIZE 2
-			u16 message_cache[DIB9000_MSG_CACHE_SIZE][MBX_MAX_WORDS];
-			u8 fw_is_running;
-		} risc;
-	} platform;
-
-	union {			/* common for all platforms */
-		struct {
-			struct dib9000_config cfg;
-		} d9;
-	} chip;
-
-	struct dvb_frontend *fe[MAX_NUMBER_OF_FRONTENDS];
-	u16 component_bus_speed;
-
-	/* for the I2C transfer */
-	struct i2c_msg msg[2];
-	u8 i2c_write_buffer[255];
-	u8 i2c_read_buffer[255];
-	struct mutex demod_lock;
-	u8 get_frontend_internal;
-	struct dib9000_pid_ctrl pid_ctrl[10];
-	s8 pid_ctrl_index; /* -1: empty list; -2: do not use the list */
-};
-
-static const u32 fe_info[44] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0
-};
-
-enum dib9000_power_mode {
-	DIB9000_POWER_ALL = 0,
-
-	DIB9000_POWER_NO,
-	DIB9000_POWER_INTERF_ANALOG_AGC,
-	DIB9000_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD,
-	DIB9000_POWER_COR4_CRY_ESRAM_MOUT_NUD,
-	DIB9000_POWER_INTERFACE_ONLY,
-};
-
-enum dib9000_out_messages {
-	OUT_MSG_HBM_ACK,
-	OUT_MSG_HOST_BUF_FAIL,
-	OUT_MSG_REQ_VERSION,
-	OUT_MSG_BRIDGE_I2C_W,
-	OUT_MSG_BRIDGE_I2C_R,
-	OUT_MSG_BRIDGE_APB_W,
-	OUT_MSG_BRIDGE_APB_R,
-	OUT_MSG_SCAN_CHANNEL,
-	OUT_MSG_MONIT_DEMOD,
-	OUT_MSG_CONF_GPIO,
-	OUT_MSG_DEBUG_HELP,
-	OUT_MSG_SUBBAND_SEL,
-	OUT_MSG_ENABLE_TIME_SLICE,
-	OUT_MSG_FE_FW_DL,
-	OUT_MSG_FE_CHANNEL_SEARCH,
-	OUT_MSG_FE_CHANNEL_TUNE,
-	OUT_MSG_FE_SLEEP,
-	OUT_MSG_FE_SYNC,
-	OUT_MSG_CTL_MONIT,
-
-	OUT_MSG_CONF_SVC,
-	OUT_MSG_SET_HBM,
-	OUT_MSG_INIT_DEMOD,
-	OUT_MSG_ENABLE_DIVERSITY,
-	OUT_MSG_SET_OUTPUT_MODE,
-	OUT_MSG_SET_PRIORITARY_CHANNEL,
-	OUT_MSG_ACK_FRG,
-	OUT_MSG_INIT_PMU,
-};
-
-enum dib9000_in_messages {
-	IN_MSG_DATA,
-	IN_MSG_FRAME_INFO,
-	IN_MSG_CTL_MONIT,
-	IN_MSG_ACK_FREE_ITEM,
-	IN_MSG_DEBUG_BUF,
-	IN_MSG_MPE_MONITOR,
-	IN_MSG_RAWTS_MONITOR,
-	IN_MSG_END_BRIDGE_I2C_RW,
-	IN_MSG_END_BRIDGE_APB_RW,
-	IN_MSG_VERSION,
-	IN_MSG_END_OF_SCAN,
-	IN_MSG_MONIT_DEMOD,
-	IN_MSG_ERROR,
-	IN_MSG_FE_FW_DL_DONE,
-	IN_MSG_EVENT,
-	IN_MSG_ACK_CHANGE_SVC,
-	IN_MSG_HBM_PROF,
-};
-
-/* memory_access requests */
-#define FE_MM_W_CHANNEL                   0
-#define FE_MM_W_FE_INFO                   1
-#define FE_MM_RW_SYNC                     2
-
-#define FE_SYNC_CHANNEL          1
-#define FE_SYNC_W_GENERIC_MONIT	 2
-#define FE_SYNC_COMPONENT_ACCESS 3
-
-#define FE_MM_R_CHANNEL_SEARCH_STATE      3
-#define FE_MM_R_CHANNEL_UNION_CONTEXT     4
-#define FE_MM_R_FE_INFO                   5
-#define FE_MM_R_FE_MONITOR                6
-
-#define FE_MM_W_CHANNEL_HEAD              7
-#define FE_MM_W_CHANNEL_UNION             8
-#define FE_MM_W_CHANNEL_CONTEXT           9
-#define FE_MM_R_CHANNEL_UNION            10
-#define FE_MM_R_CHANNEL_CONTEXT          11
-#define FE_MM_R_CHANNEL_TUNE_STATE       12
-
-#define FE_MM_R_GENERIC_MONITORING_SIZE	 13
-#define FE_MM_W_GENERIC_MONITORING	     14
-#define FE_MM_R_GENERIC_MONITORING	     15
-
-#define FE_MM_W_COMPONENT_ACCESS         16
-#define FE_MM_RW_COMPONENT_ACCESS_BUFFER 17
-static int dib9000_risc_apb_access_read(struct dib9000_state *state, u32 address, u16 attribute, const u8 * tx, u32 txlen, u8 * b, u32 len);
-static int dib9000_risc_apb_access_write(struct dib9000_state *state, u32 address, u16 attribute, const u8 * b, u32 len);
-
-static u16 to_fw_output_mode(u16 mode)
-{
-	switch (mode) {
-	case OUTMODE_HIGH_Z:
-		return 0;
-	case OUTMODE_MPEG2_PAR_GATED_CLK:
-		return 4;
-	case OUTMODE_MPEG2_PAR_CONT_CLK:
-		return 8;
-	case OUTMODE_MPEG2_SERIAL:
-		return 16;
-	case OUTMODE_DIVERSITY:
-		return 128;
-	case OUTMODE_MPEG2_FIFO:
-		return 2;
-	case OUTMODE_ANALOG_ADC:
-		return 1;
-	default:
-		return 0;
-	}
-}
-
-static u16 dib9000_read16_attr(struct dib9000_state *state, u16 reg, u8 * b, u32 len, u16 attribute)
-{
-	u32 chunk_size = 126;
-	u32 l;
-	int ret;
-
-	if (state->platform.risc.fw_is_running && (reg < 1024))
-		return dib9000_risc_apb_access_read(state, reg, attribute, NULL, 0, b, len);
-
-	memset(state->msg, 0, 2 * sizeof(struct i2c_msg));
-	state->msg[0].addr = state->i2c.i2c_addr >> 1;
-	state->msg[0].flags = 0;
-	state->msg[0].buf = state->i2c_write_buffer;
-	state->msg[0].len = 2;
-	state->msg[1].addr = state->i2c.i2c_addr >> 1;
-	state->msg[1].flags = I2C_M_RD;
-	state->msg[1].buf = b;
-	state->msg[1].len = len;
-
-	state->i2c_write_buffer[0] = reg >> 8;
-	state->i2c_write_buffer[1] = reg & 0xff;
-
-	if (attribute & DATA_BUS_ACCESS_MODE_8BIT)
-		state->i2c_write_buffer[0] |= (1 << 5);
-	if (attribute & DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT)
-		state->i2c_write_buffer[0] |= (1 << 4);
-
-	do {
-		l = len < chunk_size ? len : chunk_size;
-		state->msg[1].len = l;
-		state->msg[1].buf = b;
-		ret = i2c_transfer(state->i2c.i2c_adap, state->msg, 2) != 2 ? -EREMOTEIO : 0;
-		if (ret != 0) {
-			dprintk("i2c read error on %d", reg);
-			return -EREMOTEIO;
-		}
-
-		b += l;
-		len -= l;
-
-		if (!(attribute & DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT))
-			reg += l / 2;
-	} while ((ret == 0) && len);
-
-	return 0;
-}
-
-static u16 dib9000_i2c_read16(struct i2c_device *i2c, u16 reg)
-{
-	struct i2c_msg msg[2] = {
-		{.addr = i2c->i2c_addr >> 1, .flags = 0,
-			.buf = i2c->i2c_write_buffer, .len = 2},
-		{.addr = i2c->i2c_addr >> 1, .flags = I2C_M_RD,
-			.buf = i2c->i2c_read_buffer, .len = 2},
-	};
-
-	i2c->i2c_write_buffer[0] = reg >> 8;
-	i2c->i2c_write_buffer[1] = reg & 0xff;
-
-	if (i2c_transfer(i2c->i2c_adap, msg, 2) != 2) {
-		dprintk("read register %x error", reg);
-		return 0;
-	}
-
-	return (i2c->i2c_read_buffer[0] << 8) | i2c->i2c_read_buffer[1];
-}
-
-static inline u16 dib9000_read_word(struct dib9000_state *state, u16 reg)
-{
-	if (dib9000_read16_attr(state, reg, state->i2c_read_buffer, 2, 0) != 0)
-		return 0;
-	return (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1];
-}
-
-static inline u16 dib9000_read_word_attr(struct dib9000_state *state, u16 reg, u16 attribute)
-{
-	if (dib9000_read16_attr(state, reg, state->i2c_read_buffer, 2,
-				attribute) != 0)
-		return 0;
-	return (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1];
-}
-
-#define dib9000_read16_noinc_attr(state, reg, b, len, attribute) dib9000_read16_attr(state, reg, b, len, (attribute) | DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT)
-
-static u16 dib9000_write16_attr(struct dib9000_state *state, u16 reg, const u8 * buf, u32 len, u16 attribute)
-{
-	u32 chunk_size = 126;
-	u32 l;
-	int ret;
-
-	if (state->platform.risc.fw_is_running && (reg < 1024)) {
-		if (dib9000_risc_apb_access_write
-		    (state, reg, DATA_BUS_ACCESS_MODE_16BIT | DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT | attribute, buf, len) != 0)
-			return -EINVAL;
-		return 0;
-	}
-
-	memset(&state->msg[0], 0, sizeof(struct i2c_msg));
-	state->msg[0].addr = state->i2c.i2c_addr >> 1;
-	state->msg[0].flags = 0;
-	state->msg[0].buf = state->i2c_write_buffer;
-	state->msg[0].len = len + 2;
-
-	state->i2c_write_buffer[0] = (reg >> 8) & 0xff;
-	state->i2c_write_buffer[1] = (reg) & 0xff;
-
-	if (attribute & DATA_BUS_ACCESS_MODE_8BIT)
-		state->i2c_write_buffer[0] |= (1 << 5);
-	if (attribute & DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT)
-		state->i2c_write_buffer[0] |= (1 << 4);
-
-	do {
-		l = len < chunk_size ? len : chunk_size;
-		state->msg[0].len = l + 2;
-		memcpy(&state->i2c_write_buffer[2], buf, l);
-
-		ret = i2c_transfer(state->i2c.i2c_adap, state->msg, 1) != 1 ? -EREMOTEIO : 0;
-
-		buf += l;
-		len -= l;
-
-		if (!(attribute & DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT))
-			reg += l / 2;
-	} while ((ret == 0) && len);
-
-	return ret;
-}
-
-static int dib9000_i2c_write16(struct i2c_device *i2c, u16 reg, u16 val)
-{
-	struct i2c_msg msg = {
-		.addr = i2c->i2c_addr >> 1, .flags = 0,
-		.buf = i2c->i2c_write_buffer, .len = 4
-	};
-
-	i2c->i2c_write_buffer[0] = (reg >> 8) & 0xff;
-	i2c->i2c_write_buffer[1] = reg & 0xff;
-	i2c->i2c_write_buffer[2] = (val >> 8) & 0xff;
-	i2c->i2c_write_buffer[3] = val & 0xff;
-
-	return i2c_transfer(i2c->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
-}
-
-static inline int dib9000_write_word(struct dib9000_state *state, u16 reg, u16 val)
-{
-	u8 b[2] = { val >> 8, val & 0xff };
-	return dib9000_write16_attr(state, reg, b, 2, 0);
-}
-
-static inline int dib9000_write_word_attr(struct dib9000_state *state, u16 reg, u16 val, u16 attribute)
-{
-	u8 b[2] = { val >> 8, val & 0xff };
-	return dib9000_write16_attr(state, reg, b, 2, attribute);
-}
-
-#define dib9000_write(state, reg, buf, len) dib9000_write16_attr(state, reg, buf, len, 0)
-#define dib9000_write16_noinc(state, reg, buf, len) dib9000_write16_attr(state, reg, buf, len, DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT)
-#define dib9000_write16_noinc_attr(state, reg, buf, len, attribute) dib9000_write16_attr(state, reg, buf, len, DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT | (attribute))
-
-#define dib9000_mbx_send(state, id, data, len) dib9000_mbx_send_attr(state, id, data, len, 0)
-#define dib9000_mbx_get_message(state, id, msg, len) dib9000_mbx_get_message_attr(state, id, msg, len, 0)
-
-#define MAC_IRQ      (1 << 1)
-#define IRQ_POL_MSK  (1 << 4)
-
-#define dib9000_risc_mem_read_chunks(state, b, len) dib9000_read16_attr(state, 1063, b, len, DATA_BUS_ACCESS_MODE_8BIT | DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT)
-#define dib9000_risc_mem_write_chunks(state, buf, len) dib9000_write16_attr(state, 1063, buf, len, DATA_BUS_ACCESS_MODE_8BIT | DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT)
-
-static void dib9000_risc_mem_setup_cmd(struct dib9000_state *state, u32 addr, u32 len, u8 reading)
-{
-	u8 b[14] = { 0 };
-
-/*      dprintk("%d memcmd: %d %d %d\n", state->fe_id, addr, addr+len, len); */
-/*      b[0] = 0 << 7; */
-	b[1] = 1;
-
-/*      b[2] = 0; */
-/*      b[3] = 0; */
-	b[4] = (u8) (addr >> 8);
-	b[5] = (u8) (addr & 0xff);
-
-/*      b[10] = 0; */
-/*      b[11] = 0; */
-	b[12] = (u8) (addr >> 8);
-	b[13] = (u8) (addr & 0xff);
-
-	addr += len;
-/*      b[6] = 0; */
-/*      b[7] = 0; */
-	b[8] = (u8) (addr >> 8);
-	b[9] = (u8) (addr & 0xff);
-
-	dib9000_write(state, 1056, b, 14);
-	if (reading)
-		dib9000_write_word(state, 1056, (1 << 15) | 1);
-	state->platform.risc.memcmd = -1;	/* if it was called directly reset it - to force a future setup-call to set it */
-}
-
-static void dib9000_risc_mem_setup(struct dib9000_state *state, u8 cmd)
-{
-	struct dib9000_fe_memory_map *m = &state->platform.risc.fe_mm[cmd & 0x7f];
-	/* decide whether we need to "refresh" the memory controller */
-	if (state->platform.risc.memcmd == cmd &&	/* same command */
-	    !(cmd & 0x80 && m->size < 67))	/* and we do not want to read something with less than 67 bytes looping - working around a bug in the memory controller */
-		return;
-	dib9000_risc_mem_setup_cmd(state, m->addr, m->size, cmd & 0x80);
-	state->platform.risc.memcmd = cmd;
-}
-
-static int dib9000_risc_mem_read(struct dib9000_state *state, u8 cmd, u8 * b, u16 len)
-{
-	if (!state->platform.risc.fw_is_running)
-		return -EIO;
-
-	if (mutex_lock_interruptible(&state->platform.risc.mem_lock) < 0) {
-		dprintk("could not get the lock");
-		return -EINTR;
-	}
-	dib9000_risc_mem_setup(state, cmd | 0x80);
-	dib9000_risc_mem_read_chunks(state, b, len);
-	mutex_unlock(&state->platform.risc.mem_lock);
-	return 0;
-}
-
-static int dib9000_risc_mem_write(struct dib9000_state *state, u8 cmd, const u8 * b)
-{
-	struct dib9000_fe_memory_map *m = &state->platform.risc.fe_mm[cmd];
-	if (!state->platform.risc.fw_is_running)
-		return -EIO;
-
-	if (mutex_lock_interruptible(&state->platform.risc.mem_lock) < 0) {
-		dprintk("could not get the lock");
-		return -EINTR;
-	}
-	dib9000_risc_mem_setup(state, cmd);
-	dib9000_risc_mem_write_chunks(state, b, m->size);
-	mutex_unlock(&state->platform.risc.mem_lock);
-	return 0;
-}
-
-static int dib9000_firmware_download(struct dib9000_state *state, u8 risc_id, u16 key, const u8 * code, u32 len)
-{
-	u16 offs;
-
-	if (risc_id == 1)
-		offs = 16;
-	else
-		offs = 0;
-
-	/* config crtl reg */
-	dib9000_write_word(state, 1024 + offs, 0x000f);
-	dib9000_write_word(state, 1025 + offs, 0);
-	dib9000_write_word(state, 1031 + offs, key);
-
-	dprintk("going to download %dB of microcode", len);
-	if (dib9000_write16_noinc(state, 1026 + offs, (u8 *) code, (u16) len) != 0) {
-		dprintk("error while downloading microcode for RISC %c", 'A' + risc_id);
-		return -EIO;
-	}
-
-	dprintk("Microcode for RISC %c loaded", 'A' + risc_id);
-
-	return 0;
-}
-
-static int dib9000_mbx_host_init(struct dib9000_state *state, u8 risc_id)
-{
-	u16 mbox_offs;
-	u16 reset_reg;
-	u16 tries = 1000;
-
-	if (risc_id == 1)
-		mbox_offs = 16;
-	else
-		mbox_offs = 0;
-
-	/* Reset mailbox  */
-	dib9000_write_word(state, 1027 + mbox_offs, 0x8000);
-
-	/* Read reset status */
-	do {
-		reset_reg = dib9000_read_word(state, 1027 + mbox_offs);
-		msleep(100);
-	} while ((reset_reg & 0x8000) && --tries);
-
-	if (reset_reg & 0x8000) {
-		dprintk("MBX: init ERROR, no response from RISC %c", 'A' + risc_id);
-		return -EIO;
-	}
-	dprintk("MBX: initialized");
-	return 0;
-}
-
-#define MAX_MAILBOX_TRY 100
-static int dib9000_mbx_send_attr(struct dib9000_state *state, u8 id, u16 * data, u8 len, u16 attr)
-{
-	u8 *d, b[2];
-	u16 tmp;
-	u16 size;
-	u32 i;
-	int ret = 0;
-
-	if (!state->platform.risc.fw_is_running)
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&state->platform.risc.mbx_if_lock) < 0) {
-		dprintk("could not get the lock");
-		return -EINTR;
-	}
-	tmp = MAX_MAILBOX_TRY;
-	do {
-		size = dib9000_read_word_attr(state, 1043, attr) & 0xff;
-		if ((size + len + 1) > MBX_MAX_WORDS && --tmp) {
-			dprintk("MBX: RISC mbx full, retrying");
-			msleep(100);
-		} else
-			break;
-	} while (1);
-
-	/*dprintk( "MBX: size: %d", size); */
-
-	if (tmp == 0) {
-		ret = -EINVAL;
-		goto out;
-	}
-#ifdef DUMP_MSG
-	dprintk("--> %02x %d ", id, len + 1);
-	for (i = 0; i < len; i++)
-		dprintk("%04x ", data[i]);
-	dprintk("\n");
-#endif
-
-	/* byte-order conversion - works on big (where it is not necessary) or little endian */
-	d = (u8 *) data;
-	for (i = 0; i < len; i++) {
-		tmp = data[i];
-		*d++ = tmp >> 8;
-		*d++ = tmp & 0xff;
-	}
-
-	/* write msg */
-	b[0] = id;
-	b[1] = len + 1;
-	if (dib9000_write16_noinc_attr(state, 1045, b, 2, attr) != 0 || dib9000_write16_noinc_attr(state, 1045, (u8 *) data, len * 2, attr) != 0) {
-		ret = -EIO;
-		goto out;
-	}
-
-	/* update register nb_mes_in_RX */
-	ret = (u8) dib9000_write_word_attr(state, 1043, 1 << 14, attr);
-
-out:
-	mutex_unlock(&state->platform.risc.mbx_if_lock);
-
-	return ret;
-}
-
-static u8 dib9000_mbx_read(struct dib9000_state *state, u16 * data, u8 risc_id, u16 attr)
-{
-#ifdef DUMP_MSG
-	u16 *d = data;
-#endif
-
-	u16 tmp, i;
-	u8 size;
-	u8 mc_base;
-
-	if (!state->platform.risc.fw_is_running)
-		return 0;
-
-	if (mutex_lock_interruptible(&state->platform.risc.mbx_if_lock) < 0) {
-		dprintk("could not get the lock");
-		return 0;
-	}
-	if (risc_id == 1)
-		mc_base = 16;
-	else
-		mc_base = 0;
-
-	/* Length and type in the first word */
-	*data = dib9000_read_word_attr(state, 1029 + mc_base, attr);
-
-	size = *data & 0xff;
-	if (size <= MBX_MAX_WORDS) {
-		data++;
-		size--;		/* Initial word already read */
-
-		dib9000_read16_noinc_attr(state, 1029 + mc_base, (u8 *) data, size * 2, attr);
-
-		/* to word conversion */
-		for (i = 0; i < size; i++) {
-			tmp = *data;
-			*data = (tmp >> 8) | (tmp << 8);
-			data++;
-		}
-
-#ifdef DUMP_MSG
-		dprintk("<-- ");
-		for (i = 0; i < size + 1; i++)
-			dprintk("%04x ", d[i]);
-		dprintk("\n");
-#endif
-	} else {
-		dprintk("MBX: message is too big for message cache (%d), flushing message", size);
-		size--;		/* Initial word already read */
-		while (size--)
-			dib9000_read16_noinc_attr(state, 1029 + mc_base, (u8 *) data, 2, attr);
-	}
-	/* Update register nb_mes_in_TX */
-	dib9000_write_word_attr(state, 1028 + mc_base, 1 << 14, attr);
-
-	mutex_unlock(&state->platform.risc.mbx_if_lock);
-
-	return size + 1;
-}
-
-static int dib9000_risc_debug_buf(struct dib9000_state *state, u16 * data, u8 size)
-{
-	u32 ts = data[1] << 16 | data[0];
-	char *b = (char *)&data[2];
-
-	b[2 * (size - 2) - 1] = '\0';	/* Bullet proof the buffer */
-	if (*b == '~') {
-		b++;
-		dprintk(b);
-	} else
-		dprintk("RISC%d: %d.%04d %s", state->fe_id, ts / 10000, ts % 10000, *b ? b : "<emtpy>");
-	return 1;
-}
-
-static int dib9000_mbx_fetch_to_cache(struct dib9000_state *state, u16 attr)
-{
-	int i;
-	u8 size;
-	u16 *block;
-	/* find a free slot */
-	for (i = 0; i < DIB9000_MSG_CACHE_SIZE; i++) {
-		block = state->platform.risc.message_cache[i];
-		if (*block == 0) {
-			size = dib9000_mbx_read(state, block, 1, attr);
-
-/*                      dprintk( "MBX: fetched %04x message to cache", *block); */
-
-			switch (*block >> 8) {
-			case IN_MSG_DEBUG_BUF:
-				dib9000_risc_debug_buf(state, block + 1, size);	/* debug-messages are going to be printed right away */
-				*block = 0;	/* free the block */
-				break;
-#if 0
-			case IN_MSG_DATA:	/* FE-TRACE */
-				dib9000_risc_data_process(state, block + 1, size);
-				*block = 0;
-				break;
-#endif
-			default:
-				break;
-			}
-
-			return 1;
-		}
-	}
-	dprintk("MBX: no free cache-slot found for new message...");
-	return -1;
-}
-
-static u8 dib9000_mbx_count(struct dib9000_state *state, u8 risc_id, u16 attr)
-{
-	if (risc_id == 0)
-		return (u8) (dib9000_read_word_attr(state, 1028, attr) >> 10) & 0x1f;	/* 5 bit field */
-	else
-		return (u8) (dib9000_read_word_attr(state, 1044, attr) >> 8) & 0x7f;	/* 7 bit field */
-}
-
-static int dib9000_mbx_process(struct dib9000_state *state, u16 attr)
-{
-	int ret = 0;
-
-	if (!state->platform.risc.fw_is_running)
-		return -1;
-
-	if (mutex_lock_interruptible(&state->platform.risc.mbx_lock) < 0) {
-		dprintk("could not get the lock");
-		return -1;
-	}
-
-	if (dib9000_mbx_count(state, 1, attr))	/* 1=RiscB */
-		ret = dib9000_mbx_fetch_to_cache(state, attr);
-
-	dib9000_read_word_attr(state, 1229, attr);	/* Clear the IRQ */
-/*      if (tmp) */
-/*              dprintk( "cleared IRQ: %x", tmp); */
-	mutex_unlock(&state->platform.risc.mbx_lock);
-
-	return ret;
-}
-
-static int dib9000_mbx_get_message_attr(struct dib9000_state *state, u16 id, u16 * msg, u8 * size, u16 attr)
-{
-	u8 i;
-	u16 *block;
-	u16 timeout = 30;
-
-	*msg = 0;
-	do {
-		/* dib9000_mbx_get_from_cache(); */
-		for (i = 0; i < DIB9000_MSG_CACHE_SIZE; i++) {
-			block = state->platform.risc.message_cache[i];
-			if ((*block >> 8) == id) {
-				*size = (*block & 0xff) - 1;
-				memcpy(msg, block + 1, (*size) * 2);
-				*block = 0;	/* free the block */
-				i = 0;	/* signal that we found a message */
-				break;
-			}
-		}
-
-		if (i == 0)
-			break;
-
-		if (dib9000_mbx_process(state, attr) == -1)	/* try to fetch one message - if any */
-			return -1;
-
-	} while (--timeout);
-
-	if (timeout == 0) {
-		dprintk("waiting for message %d timed out", id);
-		return -1;
-	}
-
-	return i == 0;
-}
-
-static int dib9000_risc_check_version(struct dib9000_state *state)
-{
-	u8 r[4];
-	u8 size;
-	u16 fw_version = 0;
-
-	if (dib9000_mbx_send(state, OUT_MSG_REQ_VERSION, &fw_version, 1) != 0)
-		return -EIO;
-
-	if (dib9000_mbx_get_message(state, IN_MSG_VERSION, (u16 *) r, &size) < 0)
-		return -EIO;
-
-	fw_version = (r[0] << 8) | r[1];
-	dprintk("RISC: ver: %d.%02d (IC: %d)", fw_version >> 10, fw_version & 0x3ff, (r[2] << 8) | r[3]);
-
-	if ((fw_version >> 10) != 7)
-		return -EINVAL;
-
-	switch (fw_version & 0x3ff) {
-	case 11:
-	case 12:
-	case 14:
-	case 15:
-	case 16:
-	case 17:
-		break;
-	default:
-		dprintk("RISC: invalid firmware version");
-		return -EINVAL;
-	}
-
-	dprintk("RISC: valid firmware version");
-	return 0;
-}
-
-static int dib9000_fw_boot(struct dib9000_state *state, const u8 * codeA, u32 lenA, const u8 * codeB, u32 lenB)
-{
-	/* Reconfig pool mac ram */
-	dib9000_write_word(state, 1225, 0x02);	/* A: 8k C, 4 k D - B: 32k C 6 k D - IRAM 96k */
-	dib9000_write_word(state, 1226, 0x05);
-
-	/* Toggles IP crypto to Host APB interface. */
-	dib9000_write_word(state, 1542, 1);
-
-	/* Set jump and no jump in the dma box */
-	dib9000_write_word(state, 1074, 0);
-	dib9000_write_word(state, 1075, 0);
-
-	/* Set MAC as APB Master. */
-	dib9000_write_word(state, 1237, 0);
-
-	/* Reset the RISCs */
-	if (codeA != NULL)
-		dib9000_write_word(state, 1024, 2);
-	else
-		dib9000_write_word(state, 1024, 15);
-	if (codeB != NULL)
-		dib9000_write_word(state, 1040, 2);
-
-	if (codeA != NULL)
-		dib9000_firmware_download(state, 0, 0x1234, codeA, lenA);
-	if (codeB != NULL)
-		dib9000_firmware_download(state, 1, 0x1234, codeB, lenB);
-
-	/* Run the RISCs */
-	if (codeA != NULL)
-		dib9000_write_word(state, 1024, 0);
-	if (codeB != NULL)
-		dib9000_write_word(state, 1040, 0);
-
-	if (codeA != NULL)
-		if (dib9000_mbx_host_init(state, 0) != 0)
-			return -EIO;
-	if (codeB != NULL)
-		if (dib9000_mbx_host_init(state, 1) != 0)
-			return -EIO;
-
-	msleep(100);
-	state->platform.risc.fw_is_running = 1;
-
-	if (dib9000_risc_check_version(state) != 0)
-		return -EINVAL;
-
-	state->platform.risc.memcmd = 0xff;
-	return 0;
-}
-
-static u16 dib9000_identify(struct i2c_device *client)
-{
-	u16 value;
-
-	value = dib9000_i2c_read16(client, 896);
-	if (value != 0x01b3) {
-		dprintk("wrong Vendor ID (0x%x)", value);
-		return 0;
-	}
-
-	value = dib9000_i2c_read16(client, 897);
-	if (value != 0x4000 && value != 0x4001 && value != 0x4002 && value != 0x4003 && value != 0x4004 && value != 0x4005) {
-		dprintk("wrong Device ID (0x%x)", value);
-		return 0;
-	}
-
-	/* protect this driver to be used with 7000PC */
-	if (value == 0x4000 && dib9000_i2c_read16(client, 769) == 0x4000) {
-		dprintk("this driver does not work with DiB7000PC");
-		return 0;
-	}
-
-	switch (value) {
-	case 0x4000:
-		dprintk("found DiB7000MA/PA/MB/PB");
-		break;
-	case 0x4001:
-		dprintk("found DiB7000HC");
-		break;
-	case 0x4002:
-		dprintk("found DiB7000MC");
-		break;
-	case 0x4003:
-		dprintk("found DiB9000A");
-		break;
-	case 0x4004:
-		dprintk("found DiB9000H");
-		break;
-	case 0x4005:
-		dprintk("found DiB9000M");
-		break;
-	}
-
-	return value;
-}
-
-static void dib9000_set_power_mode(struct dib9000_state *state, enum dib9000_power_mode mode)
-{
-	/* by default everything is going to be powered off */
-	u16 reg_903 = 0x3fff, reg_904 = 0xffff, reg_905 = 0xffff, reg_906;
-	u8 offset;
-
-	if (state->revision == 0x4003 || state->revision == 0x4004 || state->revision == 0x4005)
-		offset = 1;
-	else
-		offset = 0;
-
-	reg_906 = dib9000_read_word(state, 906 + offset) | 0x3;	/* keep settings for RISC */
-
-	/* now, depending on the requested mode, we power on */
-	switch (mode) {
-		/* power up everything in the demod */
-	case DIB9000_POWER_ALL:
-		reg_903 = 0x0000;
-		reg_904 = 0x0000;
-		reg_905 = 0x0000;
-		reg_906 = 0x0000;
-		break;
-
-		/* just leave power on the control-interfaces: GPIO and (I2C or SDIO or SRAM) */
-	case DIB9000_POWER_INTERFACE_ONLY:	/* TODO power up either SDIO or I2C or SRAM */
-		reg_905 &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 2));
-		break;
-
-	case DIB9000_POWER_INTERF_ANALOG_AGC:
-		reg_903 &= ~((1 << 15) | (1 << 14) | (1 << 11) | (1 << 10));
-		reg_905 &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 4) | (1 << 2));
-		reg_906 &= ~((1 << 0));
-		break;
-
-	case DIB9000_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD:
-		reg_903 = 0x0000;
-		reg_904 = 0x801f;
-		reg_905 = 0x0000;
-		reg_906 &= ~((1 << 0));
-		break;
-
-	case DIB9000_POWER_COR4_CRY_ESRAM_MOUT_NUD:
-		reg_903 = 0x0000;
-		reg_904 = 0x8000;
-		reg_905 = 0x010b;
-		reg_906 &= ~((1 << 0));
-		break;
-	default:
-	case DIB9000_POWER_NO:
-		break;
-	}
-
-	/* always power down unused parts */
-	if (!state->platform.host.mobile_mode)
-		reg_904 |= (1 << 7) | (1 << 6) | (1 << 4) | (1 << 2) | (1 << 1);
-
-	/* P_sdio_select_clk = 0 on MC and after */
-	if (state->revision != 0x4000)
-		reg_906 <<= 1;
-
-	dib9000_write_word(state, 903 + offset, reg_903);
-	dib9000_write_word(state, 904 + offset, reg_904);
-	dib9000_write_word(state, 905 + offset, reg_905);
-	dib9000_write_word(state, 906 + offset, reg_906);
-}
-
-static int dib9000_fw_reset(struct dvb_frontend *fe)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-
-	dib9000_write_word(state, 1817, 0x0003);
-
-	dib9000_write_word(state, 1227, 1);
-	dib9000_write_word(state, 1227, 0);
-
-	switch ((state->revision = dib9000_identify(&state->i2c))) {
-	case 0x4003:
-	case 0x4004:
-	case 0x4005:
-		state->reg_offs = 1;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/* reset the i2c-master to use the host interface */
-	dibx000_reset_i2c_master(&state->i2c_master);
-
-	dib9000_set_power_mode(state, DIB9000_POWER_ALL);
-
-	/* unforce divstr regardless whether i2c enumeration was done or not */
-	dib9000_write_word(state, 1794, dib9000_read_word(state, 1794) & ~(1 << 1));
-	dib9000_write_word(state, 1796, 0);
-	dib9000_write_word(state, 1805, 0x805);
-
-	/* restart all parts */
-	dib9000_write_word(state, 898, 0xffff);
-	dib9000_write_word(state, 899, 0xffff);
-	dib9000_write_word(state, 900, 0x0001);
-	dib9000_write_word(state, 901, 0xff19);
-	dib9000_write_word(state, 902, 0x003c);
-
-	dib9000_write_word(state, 898, 0);
-	dib9000_write_word(state, 899, 0);
-	dib9000_write_word(state, 900, 0);
-	dib9000_write_word(state, 901, 0);
-	dib9000_write_word(state, 902, 0);
-
-	dib9000_write_word(state, 911, state->chip.d9.cfg.if_drives);
-
-	dib9000_set_power_mode(state, DIB9000_POWER_INTERFACE_ONLY);
-
-	return 0;
-}
-
-static int dib9000_risc_apb_access_read(struct dib9000_state *state, u32 address, u16 attribute, const u8 * tx, u32 txlen, u8 * b, u32 len)
-{
-	u16 mb[10];
-	u8 i, s;
-
-	if (address >= 1024 || !state->platform.risc.fw_is_running)
-		return -EINVAL;
-
-	/* dprintk( "APB access thru rd fw %d %x", address, attribute); */
-
-	mb[0] = (u16) address;
-	mb[1] = len / 2;
-	dib9000_mbx_send_attr(state, OUT_MSG_BRIDGE_APB_R, mb, 2, attribute);
-	switch (dib9000_mbx_get_message_attr(state, IN_MSG_END_BRIDGE_APB_RW, mb, &s, attribute)) {
-	case 1:
-		s--;
-		for (i = 0; i < s; i++) {
-			b[i * 2] = (mb[i + 1] >> 8) & 0xff;
-			b[i * 2 + 1] = (mb[i + 1]) & 0xff;
-		}
-		return 0;
-	default:
-		return -EIO;
-	}
-	return -EIO;
-}
-
-static int dib9000_risc_apb_access_write(struct dib9000_state *state, u32 address, u16 attribute, const u8 * b, u32 len)
-{
-	u16 mb[10];
-	u8 s, i;
-
-	if (address >= 1024 || !state->platform.risc.fw_is_running)
-		return -EINVAL;
-
-	/* dprintk( "APB access thru wr fw %d %x", address, attribute); */
-
-	mb[0] = (unsigned short)address;
-	for (i = 0; i < len && i < 20; i += 2)
-		mb[1 + (i / 2)] = (b[i] << 8 | b[i + 1]);
-
-	dib9000_mbx_send_attr(state, OUT_MSG_BRIDGE_APB_W, mb, 1 + len / 2, attribute);
-	return dib9000_mbx_get_message_attr(state, IN_MSG_END_BRIDGE_APB_RW, mb, &s, attribute) == 1 ? 0 : -EINVAL;
-}
-
-static int dib9000_fw_memmbx_sync(struct dib9000_state *state, u8 i)
-{
-	u8 index_loop = 10;
-
-	if (!state->platform.risc.fw_is_running)
-		return 0;
-	dib9000_risc_mem_write(state, FE_MM_RW_SYNC, &i);
-	do {
-		dib9000_risc_mem_read(state, FE_MM_RW_SYNC, state->i2c_read_buffer, 1);
-	} while (state->i2c_read_buffer[0] && index_loop--);
-
-	if (index_loop > 0)
-		return 0;
-	return -EIO;
-}
-
-static int dib9000_fw_init(struct dib9000_state *state)
-{
-	struct dibGPIOFunction *f;
-	u16 b[40] = { 0 };
-	u8 i;
-	u8 size;
-
-	if (dib9000_fw_boot(state, NULL, 0, state->chip.d9.cfg.microcode_B_fe_buffer, state->chip.d9.cfg.microcode_B_fe_size) != 0)
-		return -EIO;
-
-	/* initialize the firmware */
-	for (i = 0; i < ARRAY_SIZE(state->chip.d9.cfg.gpio_function); i++) {
-		f = &state->chip.d9.cfg.gpio_function[i];
-		if (f->mask) {
-			switch (f->function) {
-			case BOARD_GPIO_FUNCTION_COMPONENT_ON:
-				b[0] = (u16) f->mask;
-				b[1] = (u16) f->direction;
-				b[2] = (u16) f->value;
-				break;
-			case BOARD_GPIO_FUNCTION_COMPONENT_OFF:
-				b[3] = (u16) f->mask;
-				b[4] = (u16) f->direction;
-				b[5] = (u16) f->value;
-				break;
-			}
-		}
-	}
-	if (dib9000_mbx_send(state, OUT_MSG_CONF_GPIO, b, 15) != 0)
-		return -EIO;
-
-	/* subband */
-	b[0] = state->chip.d9.cfg.subband.size;	/* type == 0 -> GPIO - PWM not yet supported */
-	for (i = 0; i < state->chip.d9.cfg.subband.size; i++) {
-		b[1 + i * 4] = state->chip.d9.cfg.subband.subband[i].f_mhz;
-		b[2 + i * 4] = (u16) state->chip.d9.cfg.subband.subband[i].gpio.mask;
-		b[3 + i * 4] = (u16) state->chip.d9.cfg.subband.subband[i].gpio.direction;
-		b[4 + i * 4] = (u16) state->chip.d9.cfg.subband.subband[i].gpio.value;
-	}
-	b[1 + i * 4] = 0;	/* fe_id */
-	if (dib9000_mbx_send(state, OUT_MSG_SUBBAND_SEL, b, 2 + 4 * i) != 0)
-		return -EIO;
-
-	/* 0 - id, 1 - no_of_frontends */
-	b[0] = (0 << 8) | 1;
-	/* 0 = i2c-address demod, 0 = tuner */
-	b[1] = (0 << 8) | (0);
-	b[2] = (u16) (((state->chip.d9.cfg.xtal_clock_khz * 1000) >> 16) & 0xffff);
-	b[3] = (u16) (((state->chip.d9.cfg.xtal_clock_khz * 1000)) & 0xffff);
-	b[4] = (u16) ((state->chip.d9.cfg.vcxo_timer >> 16) & 0xffff);
-	b[5] = (u16) ((state->chip.d9.cfg.vcxo_timer) & 0xffff);
-	b[6] = (u16) ((state->chip.d9.cfg.timing_frequency >> 16) & 0xffff);
-	b[7] = (u16) ((state->chip.d9.cfg.timing_frequency) & 0xffff);
-	b[29] = state->chip.d9.cfg.if_drives;
-	if (dib9000_mbx_send(state, OUT_MSG_INIT_DEMOD, b, ARRAY_SIZE(b)) != 0)
-		return -EIO;
-
-	if (dib9000_mbx_send(state, OUT_MSG_FE_FW_DL, NULL, 0) != 0)
-		return -EIO;
-
-	if (dib9000_mbx_get_message(state, IN_MSG_FE_FW_DL_DONE, b, &size) < 0)
-		return -EIO;
-
-	if (size > ARRAY_SIZE(b)) {
-		dprintk("error : firmware returned %dbytes needed but the used buffer has only %dbytes\n Firmware init ABORTED", size,
-			(int)ARRAY_SIZE(b));
-		return -EINVAL;
-	}
-
-	for (i = 0; i < size; i += 2) {
-		state->platform.risc.fe_mm[i / 2].addr = b[i + 0];
-		state->platform.risc.fe_mm[i / 2].size = b[i + 1];
-	}
-
-	return 0;
-}
-
-static void dib9000_fw_set_channel_head(struct dib9000_state *state)
-{
-	u8 b[9];
-	u32 freq = state->fe[0]->dtv_property_cache.frequency / 1000;
-	if (state->fe_id % 2)
-		freq += 101;
-
-	b[0] = (u8) ((freq >> 0) & 0xff);
-	b[1] = (u8) ((freq >> 8) & 0xff);
-	b[2] = (u8) ((freq >> 16) & 0xff);
-	b[3] = (u8) ((freq >> 24) & 0xff);
-	b[4] = (u8) ((state->fe[0]->dtv_property_cache.bandwidth_hz / 1000 >> 0) & 0xff);
-	b[5] = (u8) ((state->fe[0]->dtv_property_cache.bandwidth_hz / 1000 >> 8) & 0xff);
-	b[6] = (u8) ((state->fe[0]->dtv_property_cache.bandwidth_hz / 1000 >> 16) & 0xff);
-	b[7] = (u8) ((state->fe[0]->dtv_property_cache.bandwidth_hz / 1000 >> 24) & 0xff);
-	b[8] = 0x80;		/* do not wait for CELL ID when doing autosearch */
-	if (state->fe[0]->dtv_property_cache.delivery_system == SYS_DVBT)
-		b[8] |= 1;
-	dib9000_risc_mem_write(state, FE_MM_W_CHANNEL_HEAD, b);
-}
-
-static int dib9000_fw_get_channel(struct dvb_frontend *fe)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	struct dibDVBTChannel {
-		s8 spectrum_inversion;
-
-		s8 nfft;
-		s8 guard;
-		s8 constellation;
-
-		s8 hrch;
-		s8 alpha;
-		s8 code_rate_hp;
-		s8 code_rate_lp;
-		s8 select_hp;
-
-		s8 intlv_native;
-	};
-	struct dibDVBTChannel *ch;
-	int ret = 0;
-
-	if (mutex_lock_interruptible(&state->platform.risc.mem_mbx_lock) < 0) {
-		dprintk("could not get the lock");
-		return -EINTR;
-	}
-	if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) {
-		ret = -EIO;
-		goto error;
-	}
-
-	dib9000_risc_mem_read(state, FE_MM_R_CHANNEL_UNION,
-			state->i2c_read_buffer, sizeof(struct dibDVBTChannel));
-	ch = (struct dibDVBTChannel *)state->i2c_read_buffer;
-
-
-	switch (ch->spectrum_inversion & 0x7) {
-	case 1:
-		state->fe[0]->dtv_property_cache.inversion = INVERSION_ON;
-		break;
-	case 0:
-		state->fe[0]->dtv_property_cache.inversion = INVERSION_OFF;
-		break;
-	default:
-	case -1:
-		state->fe[0]->dtv_property_cache.inversion = INVERSION_AUTO;
-		break;
-	}
-	switch (ch->nfft) {
-	case 0:
-		state->fe[0]->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_2K;
-		break;
-	case 2:
-		state->fe[0]->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_4K;
-		break;
-	case 1:
-		state->fe[0]->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K;
-		break;
-	default:
-	case -1:
-		state->fe[0]->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_AUTO;
-		break;
-	}
-	switch (ch->guard) {
-	case 0:
-		state->fe[0]->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_32;
-		break;
-	case 1:
-		state->fe[0]->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_16;
-		break;
-	case 2:
-		state->fe[0]->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8;
-		break;
-	case 3:
-		state->fe[0]->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_4;
-		break;
-	default:
-	case -1:
-		state->fe[0]->dtv_property_cache.guard_interval = GUARD_INTERVAL_AUTO;
-		break;
-	}
-	switch (ch->constellation) {
-	case 2:
-		state->fe[0]->dtv_property_cache.modulation = QAM_64;
-		break;
-	case 1:
-		state->fe[0]->dtv_property_cache.modulation = QAM_16;
-		break;
-	case 0:
-		state->fe[0]->dtv_property_cache.modulation = QPSK;
-		break;
-	default:
-	case -1:
-		state->fe[0]->dtv_property_cache.modulation = QAM_AUTO;
-		break;
-	}
-	switch (ch->hrch) {
-	case 0:
-		state->fe[0]->dtv_property_cache.hierarchy = HIERARCHY_NONE;
-		break;
-	case 1:
-		state->fe[0]->dtv_property_cache.hierarchy = HIERARCHY_1;
-		break;
-	default:
-	case -1:
-		state->fe[0]->dtv_property_cache.hierarchy = HIERARCHY_AUTO;
-		break;
-	}
-	switch (ch->code_rate_hp) {
-	case 1:
-		state->fe[0]->dtv_property_cache.code_rate_HP = FEC_1_2;
-		break;
-	case 2:
-		state->fe[0]->dtv_property_cache.code_rate_HP = FEC_2_3;
-		break;
-	case 3:
-		state->fe[0]->dtv_property_cache.code_rate_HP = FEC_3_4;
-		break;
-	case 5:
-		state->fe[0]->dtv_property_cache.code_rate_HP = FEC_5_6;
-		break;
-	case 7:
-		state->fe[0]->dtv_property_cache.code_rate_HP = FEC_7_8;
-		break;
-	default:
-	case -1:
-		state->fe[0]->dtv_property_cache.code_rate_HP = FEC_AUTO;
-		break;
-	}
-	switch (ch->code_rate_lp) {
-	case 1:
-		state->fe[0]->dtv_property_cache.code_rate_LP = FEC_1_2;
-		break;
-	case 2:
-		state->fe[0]->dtv_property_cache.code_rate_LP = FEC_2_3;
-		break;
-	case 3:
-		state->fe[0]->dtv_property_cache.code_rate_LP = FEC_3_4;
-		break;
-	case 5:
-		state->fe[0]->dtv_property_cache.code_rate_LP = FEC_5_6;
-		break;
-	case 7:
-		state->fe[0]->dtv_property_cache.code_rate_LP = FEC_7_8;
-		break;
-	default:
-	case -1:
-		state->fe[0]->dtv_property_cache.code_rate_LP = FEC_AUTO;
-		break;
-	}
-
-error:
-	mutex_unlock(&state->platform.risc.mem_mbx_lock);
-	return ret;
-}
-
-static int dib9000_fw_set_channel_union(struct dvb_frontend *fe)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	struct dibDVBTChannel {
-		s8 spectrum_inversion;
-
-		s8 nfft;
-		s8 guard;
-		s8 constellation;
-
-		s8 hrch;
-		s8 alpha;
-		s8 code_rate_hp;
-		s8 code_rate_lp;
-		s8 select_hp;
-
-		s8 intlv_native;
-	};
-	struct dibDVBTChannel ch;
-
-	switch (state->fe[0]->dtv_property_cache.inversion) {
-	case INVERSION_ON:
-		ch.spectrum_inversion = 1;
-		break;
-	case INVERSION_OFF:
-		ch.spectrum_inversion = 0;
-		break;
-	default:
-	case INVERSION_AUTO:
-		ch.spectrum_inversion = -1;
-		break;
-	}
-	switch (state->fe[0]->dtv_property_cache.transmission_mode) {
-	case TRANSMISSION_MODE_2K:
-		ch.nfft = 0;
-		break;
-	case TRANSMISSION_MODE_4K:
-		ch.nfft = 2;
-		break;
-	case TRANSMISSION_MODE_8K:
-		ch.nfft = 1;
-		break;
-	default:
-	case TRANSMISSION_MODE_AUTO:
-		ch.nfft = 1;
-		break;
-	}
-	switch (state->fe[0]->dtv_property_cache.guard_interval) {
-	case GUARD_INTERVAL_1_32:
-		ch.guard = 0;
-		break;
-	case GUARD_INTERVAL_1_16:
-		ch.guard = 1;
-		break;
-	case GUARD_INTERVAL_1_8:
-		ch.guard = 2;
-		break;
-	case GUARD_INTERVAL_1_4:
-		ch.guard = 3;
-		break;
-	default:
-	case GUARD_INTERVAL_AUTO:
-		ch.guard = -1;
-		break;
-	}
-	switch (state->fe[0]->dtv_property_cache.modulation) {
-	case QAM_64:
-		ch.constellation = 2;
-		break;
-	case QAM_16:
-		ch.constellation = 1;
-		break;
-	case QPSK:
-		ch.constellation = 0;
-		break;
-	default:
-	case QAM_AUTO:
-		ch.constellation = -1;
-		break;
-	}
-	switch (state->fe[0]->dtv_property_cache.hierarchy) {
-	case HIERARCHY_NONE:
-		ch.hrch = 0;
-		break;
-	case HIERARCHY_1:
-	case HIERARCHY_2:
-	case HIERARCHY_4:
-		ch.hrch = 1;
-		break;
-	default:
-	case HIERARCHY_AUTO:
-		ch.hrch = -1;
-		break;
-	}
-	ch.alpha = 1;
-	switch (state->fe[0]->dtv_property_cache.code_rate_HP) {
-	case FEC_1_2:
-		ch.code_rate_hp = 1;
-		break;
-	case FEC_2_3:
-		ch.code_rate_hp = 2;
-		break;
-	case FEC_3_4:
-		ch.code_rate_hp = 3;
-		break;
-	case FEC_5_6:
-		ch.code_rate_hp = 5;
-		break;
-	case FEC_7_8:
-		ch.code_rate_hp = 7;
-		break;
-	default:
-	case FEC_AUTO:
-		ch.code_rate_hp = -1;
-		break;
-	}
-	switch (state->fe[0]->dtv_property_cache.code_rate_LP) {
-	case FEC_1_2:
-		ch.code_rate_lp = 1;
-		break;
-	case FEC_2_3:
-		ch.code_rate_lp = 2;
-		break;
-	case FEC_3_4:
-		ch.code_rate_lp = 3;
-		break;
-	case FEC_5_6:
-		ch.code_rate_lp = 5;
-		break;
-	case FEC_7_8:
-		ch.code_rate_lp = 7;
-		break;
-	default:
-	case FEC_AUTO:
-		ch.code_rate_lp = -1;
-		break;
-	}
-	ch.select_hp = 1;
-	ch.intlv_native = 1;
-
-	dib9000_risc_mem_write(state, FE_MM_W_CHANNEL_UNION, (u8 *) &ch);
-
-	return 0;
-}
-
-static int dib9000_fw_tune(struct dvb_frontend *fe)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	int ret = 10, search = state->channel_status.status == CHANNEL_STATUS_PARAMETERS_UNKNOWN;
-	s8 i;
-
-	switch (state->tune_state) {
-	case CT_DEMOD_START:
-		dib9000_fw_set_channel_head(state);
-
-		/* write the channel context - a channel is initialized to 0, so it is OK */
-		dib9000_risc_mem_write(state, FE_MM_W_CHANNEL_CONTEXT, (u8 *) fe_info);
-		dib9000_risc_mem_write(state, FE_MM_W_FE_INFO, (u8 *) fe_info);
-
-		if (search)
-			dib9000_mbx_send(state, OUT_MSG_FE_CHANNEL_SEARCH, NULL, 0);
-		else {
-			dib9000_fw_set_channel_union(fe);
-			dib9000_mbx_send(state, OUT_MSG_FE_CHANNEL_TUNE, NULL, 0);
-		}
-		state->tune_state = CT_DEMOD_STEP_1;
-		break;
-	case CT_DEMOD_STEP_1:
-		if (search)
-			dib9000_risc_mem_read(state, FE_MM_R_CHANNEL_SEARCH_STATE, state->i2c_read_buffer, 1);
-		else
-			dib9000_risc_mem_read(state, FE_MM_R_CHANNEL_TUNE_STATE, state->i2c_read_buffer, 1);
-		i = (s8)state->i2c_read_buffer[0];
-		switch (i) {	/* something happened */
-		case 0:
-			break;
-		case -2:	/* tps locks are "slower" than MPEG locks -> even in autosearch data is OK here */
-			if (search)
-				state->status = FE_STATUS_DEMOD_SUCCESS;
-			else {
-				state->tune_state = CT_DEMOD_STOP;
-				state->status = FE_STATUS_LOCKED;
-			}
-			break;
-		default:
-			state->status = FE_STATUS_TUNE_FAILED;
-			state->tune_state = CT_DEMOD_STOP;
-			break;
-		}
-		break;
-	default:
-		ret = FE_CALLBACK_TIME_NEVER;
-		break;
-	}
-
-	return ret;
-}
-
-static int dib9000_fw_set_diversity_in(struct dvb_frontend *fe, int onoff)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	u16 mode = (u16) onoff;
-	return dib9000_mbx_send(state, OUT_MSG_ENABLE_DIVERSITY, &mode, 1);
-}
-
-static int dib9000_fw_set_output_mode(struct dvb_frontend *fe, int mode)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	u16 outreg, smo_mode;
-
-	dprintk("setting output mode for demod %p to %d", fe, mode);
-
-	switch (mode) {
-	case OUTMODE_MPEG2_PAR_GATED_CLK:
-		outreg = (1 << 10);	/* 0x0400 */
-		break;
-	case OUTMODE_MPEG2_PAR_CONT_CLK:
-		outreg = (1 << 10) | (1 << 6);	/* 0x0440 */
-		break;
-	case OUTMODE_MPEG2_SERIAL:
-		outreg = (1 << 10) | (2 << 6) | (0 << 1);	/* 0x0482 */
-		break;
-	case OUTMODE_DIVERSITY:
-		outreg = (1 << 10) | (4 << 6);	/* 0x0500 */
-		break;
-	case OUTMODE_MPEG2_FIFO:
-		outreg = (1 << 10) | (5 << 6);
-		break;
-	case OUTMODE_HIGH_Z:
-		outreg = 0;
-		break;
-	default:
-		dprintk("Unhandled output_mode passed to be set for demod %p", &state->fe[0]);
-		return -EINVAL;
-	}
-
-	dib9000_write_word(state, 1795, outreg);
-
-	switch (mode) {
-	case OUTMODE_MPEG2_PAR_GATED_CLK:
-	case OUTMODE_MPEG2_PAR_CONT_CLK:
-	case OUTMODE_MPEG2_SERIAL:
-	case OUTMODE_MPEG2_FIFO:
-		smo_mode = (dib9000_read_word(state, 295) & 0x0010) | (1 << 1);
-		if (state->chip.d9.cfg.output_mpeg2_in_188_bytes)
-			smo_mode |= (1 << 5);
-		dib9000_write_word(state, 295, smo_mode);
-		break;
-	}
-
-	outreg = to_fw_output_mode(mode);
-	return dib9000_mbx_send(state, OUT_MSG_SET_OUTPUT_MODE, &outreg, 1);
-}
-
-static int dib9000_tuner_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num)
-{
-	struct dib9000_state *state = i2c_get_adapdata(i2c_adap);
-	u16 i, len, t, index_msg;
-
-	for (index_msg = 0; index_msg < num; index_msg++) {
-		if (msg[index_msg].flags & I2C_M_RD) {	/* read */
-			len = msg[index_msg].len;
-			if (len > 16)
-				len = 16;
-
-			if (dib9000_read_word(state, 790) != 0)
-				dprintk("TunerITF: read busy");
-
-			dib9000_write_word(state, 784, (u16) (msg[index_msg].addr));
-			dib9000_write_word(state, 787, (len / 2) - 1);
-			dib9000_write_word(state, 786, 1);	/* start read */
-
-			i = 1000;
-			while (dib9000_read_word(state, 790) != (len / 2) && i)
-				i--;
-
-			if (i == 0)
-				dprintk("TunerITF: read failed");
-
-			for (i = 0; i < len; i += 2) {
-				t = dib9000_read_word(state, 785);
-				msg[index_msg].buf[i] = (t >> 8) & 0xff;
-				msg[index_msg].buf[i + 1] = (t) & 0xff;
-			}
-			if (dib9000_read_word(state, 790) != 0)
-				dprintk("TunerITF: read more data than expected");
-		} else {
-			i = 1000;
-			while (dib9000_read_word(state, 789) && i)
-				i--;
-			if (i == 0)
-				dprintk("TunerITF: write busy");
-
-			len = msg[index_msg].len;
-			if (len > 16)
-				len = 16;
-
-			for (i = 0; i < len; i += 2)
-				dib9000_write_word(state, 785, (msg[index_msg].buf[i] << 8) | msg[index_msg].buf[i + 1]);
-			dib9000_write_word(state, 784, (u16) msg[index_msg].addr);
-			dib9000_write_word(state, 787, (len / 2) - 1);
-			dib9000_write_word(state, 786, 0);	/* start write */
-
-			i = 1000;
-			while (dib9000_read_word(state, 791) > 0 && i)
-				i--;
-			if (i == 0)
-				dprintk("TunerITF: write failed");
-		}
-	}
-	return num;
-}
-
-int dib9000_fw_set_component_bus_speed(struct dvb_frontend *fe, u16 speed)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-
-	state->component_bus_speed = speed;
-	return 0;
-}
-EXPORT_SYMBOL(dib9000_fw_set_component_bus_speed);
-
-static int dib9000_fw_component_bus_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num)
-{
-	struct dib9000_state *state = i2c_get_adapdata(i2c_adap);
-	u8 type = 0;		/* I2C */
-	u8 port = DIBX000_I2C_INTERFACE_GPIO_3_4;
-	u16 scl = state->component_bus_speed;	/* SCL frequency */
-	struct dib9000_fe_memory_map *m = &state->platform.risc.fe_mm[FE_MM_RW_COMPONENT_ACCESS_BUFFER];
-	u8 p[13] = { 0 };
-
-	p[0] = type;
-	p[1] = port;
-	p[2] = msg[0].addr << 1;
-
-	p[3] = (u8) scl & 0xff;	/* scl */
-	p[4] = (u8) (scl >> 8);
-
-	p[7] = 0;
-	p[8] = 0;
-
-	p[9] = (u8) (msg[0].len);
-	p[10] = (u8) (msg[0].len >> 8);
-	if ((num > 1) && (msg[1].flags & I2C_M_RD)) {
-		p[11] = (u8) (msg[1].len);
-		p[12] = (u8) (msg[1].len >> 8);
-	} else {
-		p[11] = 0;
-		p[12] = 0;
-	}
-
-	if (mutex_lock_interruptible(&state->platform.risc.mem_mbx_lock) < 0) {
-		dprintk("could not get the lock");
-		return 0;
-	}
-
-	dib9000_risc_mem_write(state, FE_MM_W_COMPONENT_ACCESS, p);
-
-	{			/* write-part */
-		dib9000_risc_mem_setup_cmd(state, m->addr, msg[0].len, 0);
-		dib9000_risc_mem_write_chunks(state, msg[0].buf, msg[0].len);
-	}
-
-	/* do the transaction */
-	if (dib9000_fw_memmbx_sync(state, FE_SYNC_COMPONENT_ACCESS) < 0) {
-		mutex_unlock(&state->platform.risc.mem_mbx_lock);
-		return 0;
-	}
-
-	/* read back any possible result */
-	if ((num > 1) && (msg[1].flags & I2C_M_RD))
-		dib9000_risc_mem_read(state, FE_MM_RW_COMPONENT_ACCESS_BUFFER, msg[1].buf, msg[1].len);
-
-	mutex_unlock(&state->platform.risc.mem_mbx_lock);
-
-	return num;
-}
-
-static u32 dib9000_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm dib9000_tuner_algo = {
-	.master_xfer = dib9000_tuner_xfer,
-	.functionality = dib9000_i2c_func,
-};
-
-static struct i2c_algorithm dib9000_component_bus_algo = {
-	.master_xfer = dib9000_fw_component_bus_xfer,
-	.functionality = dib9000_i2c_func,
-};
-
-struct i2c_adapter *dib9000_get_tuner_interface(struct dvb_frontend *fe)
-{
-	struct dib9000_state *st = fe->demodulator_priv;
-	return &st->tuner_adap;
-}
-EXPORT_SYMBOL(dib9000_get_tuner_interface);
-
-struct i2c_adapter *dib9000_get_component_bus_interface(struct dvb_frontend *fe)
-{
-	struct dib9000_state *st = fe->demodulator_priv;
-	return &st->component_bus;
-}
-EXPORT_SYMBOL(dib9000_get_component_bus_interface);
-
-struct i2c_adapter *dib9000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface intf, int gating)
-{
-	struct dib9000_state *st = fe->demodulator_priv;
-	return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating);
-}
-EXPORT_SYMBOL(dib9000_get_i2c_master);
-
-int dib9000_set_i2c_adapter(struct dvb_frontend *fe, struct i2c_adapter *i2c)
-{
-	struct dib9000_state *st = fe->demodulator_priv;
-
-	st->i2c.i2c_adap = i2c;
-	return 0;
-}
-EXPORT_SYMBOL(dib9000_set_i2c_adapter);
-
-static int dib9000_cfg_gpio(struct dib9000_state *st, u8 num, u8 dir, u8 val)
-{
-	st->gpio_dir = dib9000_read_word(st, 773);
-	st->gpio_dir &= ~(1 << num);	/* reset the direction bit */
-	st->gpio_dir |= (dir & 0x1) << num;	/* set the new direction */
-	dib9000_write_word(st, 773, st->gpio_dir);
-
-	st->gpio_val = dib9000_read_word(st, 774);
-	st->gpio_val &= ~(1 << num);	/* reset the direction bit */
-	st->gpio_val |= (val & 0x01) << num;	/* set the new value */
-	dib9000_write_word(st, 774, st->gpio_val);
-
-	dprintk("gpio dir: %04x: gpio val: %04x", st->gpio_dir, st->gpio_val);
-
-	return 0;
-}
-
-int dib9000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	return dib9000_cfg_gpio(state, num, dir, val);
-}
-EXPORT_SYMBOL(dib9000_set_gpio);
-
-int dib9000_fw_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	u16 val;
-	int ret;
-
-	if ((state->pid_ctrl_index != -2) && (state->pid_ctrl_index < 9)) {
-		/* postpone the pid filtering cmd */
-		dprintk("pid filter cmd postpone");
-		state->pid_ctrl_index++;
-		state->pid_ctrl[state->pid_ctrl_index].cmd = DIB9000_PID_FILTER_CTRL;
-		state->pid_ctrl[state->pid_ctrl_index].onoff = onoff;
-		return 0;
-	}
-
-	if (mutex_lock_interruptible(&state->demod_lock) < 0) {
-		dprintk("could not get the lock");
-		return -EINTR;
-	}
-
-	val = dib9000_read_word(state, 294 + 1) & 0xffef;
-	val |= (onoff & 0x1) << 4;
-
-	dprintk("PID filter enabled %d", onoff);
-	ret = dib9000_write_word(state, 294 + 1, val);
-	mutex_unlock(&state->demod_lock);
-	return ret;
-
-}
-EXPORT_SYMBOL(dib9000_fw_pid_filter_ctrl);
-
-int dib9000_fw_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	int ret;
-
-	if (state->pid_ctrl_index != -2) {
-		/* postpone the pid filtering cmd */
-		dprintk("pid filter postpone");
-		if (state->pid_ctrl_index < 9) {
-			state->pid_ctrl_index++;
-			state->pid_ctrl[state->pid_ctrl_index].cmd = DIB9000_PID_FILTER;
-			state->pid_ctrl[state->pid_ctrl_index].id = id;
-			state->pid_ctrl[state->pid_ctrl_index].pid = pid;
-			state->pid_ctrl[state->pid_ctrl_index].onoff = onoff;
-		} else
-			dprintk("can not add any more pid ctrl cmd");
-		return 0;
-	}
-
-	if (mutex_lock_interruptible(&state->demod_lock) < 0) {
-		dprintk("could not get the lock");
-		return -EINTR;
-	}
-	dprintk("Index %x, PID %d, OnOff %d", id, pid, onoff);
-	ret = dib9000_write_word(state, 300 + 1 + id,
-			onoff ? (1 << 13) | pid : 0);
-	mutex_unlock(&state->demod_lock);
-	return ret;
-}
-EXPORT_SYMBOL(dib9000_fw_pid_filter);
-
-int dib9000_firmware_post_pll_init(struct dvb_frontend *fe)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	return dib9000_fw_init(state);
-}
-EXPORT_SYMBOL(dib9000_firmware_post_pll_init);
-
-static void dib9000_release(struct dvb_frontend *demod)
-{
-	struct dib9000_state *st = demod->demodulator_priv;
-	u8 index_frontend;
-
-	for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (st->fe[index_frontend] != NULL); index_frontend++)
-		dvb_frontend_detach(st->fe[index_frontend]);
-
-	dibx000_exit_i2c_master(&st->i2c_master);
-
-	i2c_del_adapter(&st->tuner_adap);
-	i2c_del_adapter(&st->component_bus);
-	kfree(st->fe[0]);
-	kfree(st);
-}
-
-static int dib9000_wakeup(struct dvb_frontend *fe)
-{
-	return 0;
-}
-
-static int dib9000_sleep(struct dvb_frontend *fe)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	u8 index_frontend;
-	int ret = 0;
-
-	if (mutex_lock_interruptible(&state->demod_lock) < 0) {
-		dprintk("could not get the lock");
-		return -EINTR;
-	}
-	for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
-		ret = state->fe[index_frontend]->ops.sleep(state->fe[index_frontend]);
-		if (ret < 0)
-			goto error;
-	}
-	ret = dib9000_mbx_send(state, OUT_MSG_FE_SLEEP, NULL, 0);
-
-error:
-	mutex_unlock(&state->demod_lock);
-	return ret;
-}
-
-static int dib9000_fe_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *tune)
-{
-	tune->min_delay_ms = 1000;
-	return 0;
-}
-
-static int dib9000_get_frontend(struct dvb_frontend *fe)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	u8 index_frontend, sub_index_frontend;
-	fe_status_t stat;
-	int ret = 0;
-
-	if (state->get_frontend_internal == 0) {
-		if (mutex_lock_interruptible(&state->demod_lock) < 0) {
-			dprintk("could not get the lock");
-			return -EINTR;
-		}
-	}
-
-	for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
-		state->fe[index_frontend]->ops.read_status(state->fe[index_frontend], &stat);
-		if (stat & FE_HAS_SYNC) {
-			dprintk("TPS lock on the slave%i", index_frontend);
-
-			/* synchronize the cache with the other frontends */
-			state->fe[index_frontend]->ops.get_frontend(state->fe[index_frontend]);
-			for (sub_index_frontend = 0; (sub_index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[sub_index_frontend] != NULL);
-			     sub_index_frontend++) {
-				if (sub_index_frontend != index_frontend) {
-					state->fe[sub_index_frontend]->dtv_property_cache.modulation =
-					    state->fe[index_frontend]->dtv_property_cache.modulation;
-					state->fe[sub_index_frontend]->dtv_property_cache.inversion =
-					    state->fe[index_frontend]->dtv_property_cache.inversion;
-					state->fe[sub_index_frontend]->dtv_property_cache.transmission_mode =
-					    state->fe[index_frontend]->dtv_property_cache.transmission_mode;
-					state->fe[sub_index_frontend]->dtv_property_cache.guard_interval =
-					    state->fe[index_frontend]->dtv_property_cache.guard_interval;
-					state->fe[sub_index_frontend]->dtv_property_cache.hierarchy =
-					    state->fe[index_frontend]->dtv_property_cache.hierarchy;
-					state->fe[sub_index_frontend]->dtv_property_cache.code_rate_HP =
-					    state->fe[index_frontend]->dtv_property_cache.code_rate_HP;
-					state->fe[sub_index_frontend]->dtv_property_cache.code_rate_LP =
-					    state->fe[index_frontend]->dtv_property_cache.code_rate_LP;
-					state->fe[sub_index_frontend]->dtv_property_cache.rolloff =
-					    state->fe[index_frontend]->dtv_property_cache.rolloff;
-				}
-			}
-			ret = 0;
-			goto return_value;
-		}
-	}
-
-	/* get the channel from master chip */
-	ret = dib9000_fw_get_channel(fe);
-	if (ret != 0)
-		goto return_value;
-
-	/* synchronize the cache with the other frontends */
-	for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
-		state->fe[index_frontend]->dtv_property_cache.inversion = fe->dtv_property_cache.inversion;
-		state->fe[index_frontend]->dtv_property_cache.transmission_mode = fe->dtv_property_cache.transmission_mode;
-		state->fe[index_frontend]->dtv_property_cache.guard_interval = fe->dtv_property_cache.guard_interval;
-		state->fe[index_frontend]->dtv_property_cache.modulation = fe->dtv_property_cache.modulation;
-		state->fe[index_frontend]->dtv_property_cache.hierarchy = fe->dtv_property_cache.hierarchy;
-		state->fe[index_frontend]->dtv_property_cache.code_rate_HP = fe->dtv_property_cache.code_rate_HP;
-		state->fe[index_frontend]->dtv_property_cache.code_rate_LP = fe->dtv_property_cache.code_rate_LP;
-		state->fe[index_frontend]->dtv_property_cache.rolloff = fe->dtv_property_cache.rolloff;
-	}
-	ret = 0;
-
-return_value:
-	if (state->get_frontend_internal == 0)
-		mutex_unlock(&state->demod_lock);
-	return ret;
-}
-
-static int dib9000_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	state->tune_state = tune_state;
-	if (tune_state == CT_DEMOD_START)
-		state->status = FE_STATUS_TUNE_PENDING;
-
-	return 0;
-}
-
-static u32 dib9000_get_status(struct dvb_frontend *fe)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	return state->status;
-}
-
-static int dib9000_set_channel_status(struct dvb_frontend *fe, struct dvb_frontend_parametersContext *channel_status)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-
-	memcpy(&state->channel_status, channel_status, sizeof(struct dvb_frontend_parametersContext));
-	return 0;
-}
-
-static int dib9000_set_frontend(struct dvb_frontend *fe)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	int sleep_time, sleep_time_slave;
-	u32 frontend_status;
-	u8 nbr_pending, exit_condition, index_frontend, index_frontend_success;
-	struct dvb_frontend_parametersContext channel_status;
-
-	/* check that the correct parameters are set */
-	if (state->fe[0]->dtv_property_cache.frequency == 0) {
-		dprintk("dib9000: must specify frequency ");
-		return 0;
-	}
-
-	if (state->fe[0]->dtv_property_cache.bandwidth_hz == 0) {
-		dprintk("dib9000: must specify bandwidth ");
-		return 0;
-	}
-
-	state->pid_ctrl_index = -1; /* postpone the pid filtering cmd */
-	if (mutex_lock_interruptible(&state->demod_lock) < 0) {
-		dprintk("could not get the lock");
-		return 0;
-	}
-
-	fe->dtv_property_cache.delivery_system = SYS_DVBT;
-
-	/* set the master status */
-	if (state->fe[0]->dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO ||
-	    state->fe[0]->dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO ||
-	    state->fe[0]->dtv_property_cache.modulation == QAM_AUTO ||
-	    state->fe[0]->dtv_property_cache.code_rate_HP == FEC_AUTO) {
-		/* no channel specified, autosearch the channel */
-		state->channel_status.status = CHANNEL_STATUS_PARAMETERS_UNKNOWN;
-	} else
-		state->channel_status.status = CHANNEL_STATUS_PARAMETERS_SET;
-
-	/* set mode and status for the different frontends */
-	for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
-		dib9000_fw_set_diversity_in(state->fe[index_frontend], 1);
-
-		/* synchronization of the cache */
-		memcpy(&state->fe[index_frontend]->dtv_property_cache, &fe->dtv_property_cache, sizeof(struct dtv_frontend_properties));
-
-		state->fe[index_frontend]->dtv_property_cache.delivery_system = SYS_DVBT;
-		dib9000_fw_set_output_mode(state->fe[index_frontend], OUTMODE_HIGH_Z);
-
-		dib9000_set_channel_status(state->fe[index_frontend], &state->channel_status);
-		dib9000_set_tune_state(state->fe[index_frontend], CT_DEMOD_START);
-	}
-
-	/* actual tune */
-	exit_condition = 0;	/* 0: tune pending; 1: tune failed; 2:tune success */
-	index_frontend_success = 0;
-	do {
-		sleep_time = dib9000_fw_tune(state->fe[0]);
-		for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
-			sleep_time_slave = dib9000_fw_tune(state->fe[index_frontend]);
-			if (sleep_time == FE_CALLBACK_TIME_NEVER)
-				sleep_time = sleep_time_slave;
-			else if ((sleep_time_slave != FE_CALLBACK_TIME_NEVER) && (sleep_time_slave > sleep_time))
-				sleep_time = sleep_time_slave;
-		}
-		if (sleep_time != FE_CALLBACK_TIME_NEVER)
-			msleep(sleep_time / 10);
-		else
-			break;
-
-		nbr_pending = 0;
-		exit_condition = 0;
-		index_frontend_success = 0;
-		for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
-			frontend_status = -dib9000_get_status(state->fe[index_frontend]);
-			if (frontend_status > -FE_STATUS_TUNE_PENDING) {
-				exit_condition = 2;	/* tune success */
-				index_frontend_success = index_frontend;
-				break;
-			}
-			if (frontend_status == -FE_STATUS_TUNE_PENDING)
-				nbr_pending++;	/* some frontends are still tuning */
-		}
-		if ((exit_condition != 2) && (nbr_pending == 0))
-			exit_condition = 1;	/* if all tune are done and no success, exit: tune failed */
-
-	} while (exit_condition == 0);
-
-	/* check the tune result */
-	if (exit_condition == 1) {	/* tune failed */
-		dprintk("tune failed");
-		mutex_unlock(&state->demod_lock);
-		/* tune failed; put all the pid filtering cmd to junk */
-		state->pid_ctrl_index = -1;
-		return 0;
-	}
-
-	dprintk("tune success on frontend%i", index_frontend_success);
-
-	/* synchronize all the channel cache */
-	state->get_frontend_internal = 1;
-	dib9000_get_frontend(state->fe[0]);
-	state->get_frontend_internal = 0;
-
-	/* retune the other frontends with the found channel */
-	channel_status.status = CHANNEL_STATUS_PARAMETERS_SET;
-	for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
-		/* only retune the frontends which was not tuned success */
-		if (index_frontend != index_frontend_success) {
-			dib9000_set_channel_status(state->fe[index_frontend], &channel_status);
-			dib9000_set_tune_state(state->fe[index_frontend], CT_DEMOD_START);
-		}
-	}
-	do {
-		sleep_time = FE_CALLBACK_TIME_NEVER;
-		for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
-			if (index_frontend != index_frontend_success) {
-				sleep_time_slave = dib9000_fw_tune(state->fe[index_frontend]);
-				if (sleep_time == FE_CALLBACK_TIME_NEVER)
-					sleep_time = sleep_time_slave;
-				else if ((sleep_time_slave != FE_CALLBACK_TIME_NEVER) && (sleep_time_slave > sleep_time))
-					sleep_time = sleep_time_slave;
-			}
-		}
-		if (sleep_time != FE_CALLBACK_TIME_NEVER)
-			msleep(sleep_time / 10);
-		else
-			break;
-
-		nbr_pending = 0;
-		for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
-			if (index_frontend != index_frontend_success) {
-				frontend_status = -dib9000_get_status(state->fe[index_frontend]);
-				if ((index_frontend != index_frontend_success) && (frontend_status == -FE_STATUS_TUNE_PENDING))
-					nbr_pending++;	/* some frontends are still tuning */
-			}
-		}
-	} while (nbr_pending != 0);
-
-	/* set the output mode */
-	dib9000_fw_set_output_mode(state->fe[0], state->chip.d9.cfg.output_mode);
-	for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++)
-		dib9000_fw_set_output_mode(state->fe[index_frontend], OUTMODE_DIVERSITY);
-
-	/* turn off the diversity for the last frontend */
-	dib9000_fw_set_diversity_in(state->fe[index_frontend - 1], 0);
-
-	mutex_unlock(&state->demod_lock);
-	if (state->pid_ctrl_index >= 0) {
-		u8 index_pid_filter_cmd;
-		u8 pid_ctrl_index = state->pid_ctrl_index;
-
-		state->pid_ctrl_index = -2;
-		for (index_pid_filter_cmd = 0;
-				index_pid_filter_cmd <= pid_ctrl_index;
-				index_pid_filter_cmd++) {
-			if (state->pid_ctrl[index_pid_filter_cmd].cmd == DIB9000_PID_FILTER_CTRL)
-				dib9000_fw_pid_filter_ctrl(state->fe[0],
-						state->pid_ctrl[index_pid_filter_cmd].onoff);
-			else if (state->pid_ctrl[index_pid_filter_cmd].cmd == DIB9000_PID_FILTER)
-				dib9000_fw_pid_filter(state->fe[0],
-						state->pid_ctrl[index_pid_filter_cmd].id,
-						state->pid_ctrl[index_pid_filter_cmd].pid,
-						state->pid_ctrl[index_pid_filter_cmd].onoff);
-		}
-	}
-	/* do not postpone any more the pid filtering */
-	state->pid_ctrl_index = -2;
-
-	return 0;
-}
-
-static u16 dib9000_read_lock(struct dvb_frontend *fe)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-
-	return dib9000_read_word(state, 535);
-}
-
-static int dib9000_read_status(struct dvb_frontend *fe, fe_status_t * stat)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	u8 index_frontend;
-	u16 lock = 0, lock_slave = 0;
-
-	if (mutex_lock_interruptible(&state->demod_lock) < 0) {
-		dprintk("could not get the lock");
-		return -EINTR;
-	}
-	for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++)
-		lock_slave |= dib9000_read_lock(state->fe[index_frontend]);
-
-	lock = dib9000_read_word(state, 535);
-
-	*stat = 0;
-
-	if ((lock & 0x8000) || (lock_slave & 0x8000))
-		*stat |= FE_HAS_SIGNAL;
-	if ((lock & 0x3000) || (lock_slave & 0x3000))
-		*stat |= FE_HAS_CARRIER;
-	if ((lock & 0x0100) || (lock_slave & 0x0100))
-		*stat |= FE_HAS_VITERBI;
-	if (((lock & 0x0038) == 0x38) || ((lock_slave & 0x0038) == 0x38))
-		*stat |= FE_HAS_SYNC;
-	if ((lock & 0x0008) || (lock_slave & 0x0008))
-		*stat |= FE_HAS_LOCK;
-
-	mutex_unlock(&state->demod_lock);
-
-	return 0;
-}
-
-static int dib9000_read_ber(struct dvb_frontend *fe, u32 * ber)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	u16 *c;
-	int ret = 0;
-
-	if (mutex_lock_interruptible(&state->demod_lock) < 0) {
-		dprintk("could not get the lock");
-		return -EINTR;
-	}
-	if (mutex_lock_interruptible(&state->platform.risc.mem_mbx_lock) < 0) {
-		dprintk("could not get the lock");
-		ret = -EINTR;
-		goto error;
-	}
-	if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) {
-		mutex_unlock(&state->platform.risc.mem_mbx_lock);
-		ret = -EIO;
-		goto error;
-	}
-	dib9000_risc_mem_read(state, FE_MM_R_FE_MONITOR,
-			state->i2c_read_buffer, 16 * 2);
-	mutex_unlock(&state->platform.risc.mem_mbx_lock);
-
-	c = (u16 *)state->i2c_read_buffer;
-
-	*ber = c[10] << 16 | c[11];
-
-error:
-	mutex_unlock(&state->demod_lock);
-	return ret;
-}
-
-static int dib9000_read_signal_strength(struct dvb_frontend *fe, u16 * strength)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	u8 index_frontend;
-	u16 *c = (u16 *)state->i2c_read_buffer;
-	u16 val;
-	int ret = 0;
-
-	if (mutex_lock_interruptible(&state->demod_lock) < 0) {
-		dprintk("could not get the lock");
-		return -EINTR;
-	}
-	*strength = 0;
-	for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
-		state->fe[index_frontend]->ops.read_signal_strength(state->fe[index_frontend], &val);
-		if (val > 65535 - *strength)
-			*strength = 65535;
-		else
-			*strength += val;
-	}
-
-	if (mutex_lock_interruptible(&state->platform.risc.mem_mbx_lock) < 0) {
-		dprintk("could not get the lock");
-		ret = -EINTR;
-		goto error;
-	}
-	if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) {
-		mutex_unlock(&state->platform.risc.mem_mbx_lock);
-		ret = -EIO;
-		goto error;
-	}
-	dib9000_risc_mem_read(state, FE_MM_R_FE_MONITOR, (u8 *) c, 16 * 2);
-	mutex_unlock(&state->platform.risc.mem_mbx_lock);
-
-	val = 65535 - c[4];
-	if (val > 65535 - *strength)
-		*strength = 65535;
-	else
-		*strength += val;
-
-error:
-	mutex_unlock(&state->demod_lock);
-	return ret;
-}
-
-static u32 dib9000_get_snr(struct dvb_frontend *fe)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	u16 *c = (u16 *)state->i2c_read_buffer;
-	u32 n, s, exp;
-	u16 val;
-
-	if (mutex_lock_interruptible(&state->platform.risc.mem_mbx_lock) < 0) {
-		dprintk("could not get the lock");
-		return 0;
-	}
-	if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) {
-		mutex_unlock(&state->platform.risc.mem_mbx_lock);
-		return 0;
-	}
-	dib9000_risc_mem_read(state, FE_MM_R_FE_MONITOR, (u8 *) c, 16 * 2);
-	mutex_unlock(&state->platform.risc.mem_mbx_lock);
-
-	val = c[7];
-	n = (val >> 4) & 0xff;
-	exp = ((val & 0xf) << 2);
-	val = c[8];
-	exp += ((val >> 14) & 0x3);
-	if ((exp & 0x20) != 0)
-		exp -= 0x40;
-	n <<= exp + 16;
-
-	s = (val >> 6) & 0xFF;
-	exp = (val & 0x3F);
-	if ((exp & 0x20) != 0)
-		exp -= 0x40;
-	s <<= exp + 16;
-
-	if (n > 0) {
-		u32 t = (s / n) << 16;
-		return t + ((s << 16) - n * t) / n;
-	}
-	return 0xffffffff;
-}
-
-static int dib9000_read_snr(struct dvb_frontend *fe, u16 * snr)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	u8 index_frontend;
-	u32 snr_master;
-
-	if (mutex_lock_interruptible(&state->demod_lock) < 0) {
-		dprintk("could not get the lock");
-		return -EINTR;
-	}
-	snr_master = dib9000_get_snr(fe);
-	for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++)
-		snr_master += dib9000_get_snr(state->fe[index_frontend]);
-
-	if ((snr_master >> 16) != 0) {
-		snr_master = 10 * intlog10(snr_master >> 16);
-		*snr = snr_master / ((1 << 24) / 10);
-	} else
-		*snr = 0;
-
-	mutex_unlock(&state->demod_lock);
-
-	return 0;
-}
-
-static int dib9000_read_unc_blocks(struct dvb_frontend *fe, u32 * unc)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	u16 *c = (u16 *)state->i2c_read_buffer;
-	int ret = 0;
-
-	if (mutex_lock_interruptible(&state->demod_lock) < 0) {
-		dprintk("could not get the lock");
-		return -EINTR;
-	}
-	if (mutex_lock_interruptible(&state->platform.risc.mem_mbx_lock) < 0) {
-		dprintk("could not get the lock");
-		ret = -EINTR;
-		goto error;
-	}
-	if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) {
-		mutex_unlock(&state->platform.risc.mem_mbx_lock);
-		ret = -EIO;
-		goto error;
-	}
-	dib9000_risc_mem_read(state, FE_MM_R_FE_MONITOR, (u8 *) c, 16 * 2);
-	mutex_unlock(&state->platform.risc.mem_mbx_lock);
-
-	*unc = c[12];
-
-error:
-	mutex_unlock(&state->demod_lock);
-	return ret;
-}
-
-int dib9000_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, u8 first_addr)
-{
-	int k = 0, ret = 0;
-	u8 new_addr = 0;
-	struct i2c_device client = {.i2c_adap = i2c };
-
-	client.i2c_write_buffer = kzalloc(4 * sizeof(u8), GFP_KERNEL);
-	if (!client.i2c_write_buffer) {
-		dprintk("%s: not enough memory", __func__);
-		return -ENOMEM;
-	}
-	client.i2c_read_buffer = kzalloc(4 * sizeof(u8), GFP_KERNEL);
-	if (!client.i2c_read_buffer) {
-		dprintk("%s: not enough memory", __func__);
-		ret = -ENOMEM;
-		goto error_memory;
-	}
-
-	client.i2c_addr = default_addr + 16;
-	dib9000_i2c_write16(&client, 1796, 0x0);
-
-	for (k = no_of_demods - 1; k >= 0; k--) {
-		/* designated i2c address */
-		new_addr = first_addr + (k << 1);
-		client.i2c_addr = default_addr;
-
-		dib9000_i2c_write16(&client, 1817, 3);
-		dib9000_i2c_write16(&client, 1796, 0);
-		dib9000_i2c_write16(&client, 1227, 1);
-		dib9000_i2c_write16(&client, 1227, 0);
-
-		client.i2c_addr = new_addr;
-		dib9000_i2c_write16(&client, 1817, 3);
-		dib9000_i2c_write16(&client, 1796, 0);
-		dib9000_i2c_write16(&client, 1227, 1);
-		dib9000_i2c_write16(&client, 1227, 0);
-
-		if (dib9000_identify(&client) == 0) {
-			client.i2c_addr = default_addr;
-			if (dib9000_identify(&client) == 0) {
-				dprintk("DiB9000 #%d: not identified", k);
-				ret = -EIO;
-				goto error;
-			}
-		}
-
-		dib9000_i2c_write16(&client, 1795, (1 << 10) | (4 << 6));
-		dib9000_i2c_write16(&client, 1794, (new_addr << 2) | 2);
-
-		dprintk("IC %d initialized (to i2c_address 0x%x)", k, new_addr);
-	}
-
-	for (k = 0; k < no_of_demods; k++) {
-		new_addr = first_addr | (k << 1);
-		client.i2c_addr = new_addr;
-
-		dib9000_i2c_write16(&client, 1794, (new_addr << 2));
-		dib9000_i2c_write16(&client, 1795, 0);
-	}
-
-error:
-	kfree(client.i2c_read_buffer);
-error_memory:
-	kfree(client.i2c_write_buffer);
-
-	return ret;
-}
-EXPORT_SYMBOL(dib9000_i2c_enumeration);
-
-int dib9000_set_slave_frontend(struct dvb_frontend *fe, struct dvb_frontend *fe_slave)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	u8 index_frontend = 1;
-
-	while ((index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL))
-		index_frontend++;
-	if (index_frontend < MAX_NUMBER_OF_FRONTENDS) {
-		dprintk("set slave fe %p to index %i", fe_slave, index_frontend);
-		state->fe[index_frontend] = fe_slave;
-		return 0;
-	}
-
-	dprintk("too many slave frontend");
-	return -ENOMEM;
-}
-EXPORT_SYMBOL(dib9000_set_slave_frontend);
-
-int dib9000_remove_slave_frontend(struct dvb_frontend *fe)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-	u8 index_frontend = 1;
-
-	while ((index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL))
-		index_frontend++;
-	if (index_frontend != 1) {
-		dprintk("remove slave fe %p (index %i)", state->fe[index_frontend - 1], index_frontend - 1);
-		state->fe[index_frontend] = NULL;
-		return 0;
-	}
-
-	dprintk("no frontend to be removed");
-	return -ENODEV;
-}
-EXPORT_SYMBOL(dib9000_remove_slave_frontend);
-
-struct dvb_frontend *dib9000_get_slave_frontend(struct dvb_frontend *fe, int slave_index)
-{
-	struct dib9000_state *state = fe->demodulator_priv;
-
-	if (slave_index >= MAX_NUMBER_OF_FRONTENDS)
-		return NULL;
-	return state->fe[slave_index];
-}
-EXPORT_SYMBOL(dib9000_get_slave_frontend);
-
-static struct dvb_frontend_ops dib9000_ops;
-struct dvb_frontend *dib9000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, const struct dib9000_config *cfg)
-{
-	struct dvb_frontend *fe;
-	struct dib9000_state *st;
-	st = kzalloc(sizeof(struct dib9000_state), GFP_KERNEL);
-	if (st == NULL)
-		return NULL;
-	fe = kzalloc(sizeof(struct dvb_frontend), GFP_KERNEL);
-	if (fe == NULL) {
-		kfree(st);
-		return NULL;
-	}
-
-	memcpy(&st->chip.d9.cfg, cfg, sizeof(struct dib9000_config));
-	st->i2c.i2c_adap = i2c_adap;
-	st->i2c.i2c_addr = i2c_addr;
-	st->i2c.i2c_write_buffer = st->i2c_write_buffer;
-	st->i2c.i2c_read_buffer = st->i2c_read_buffer;
-
-	st->gpio_dir = DIB9000_GPIO_DEFAULT_DIRECTIONS;
-	st->gpio_val = DIB9000_GPIO_DEFAULT_VALUES;
-	st->gpio_pwm_pos = DIB9000_GPIO_DEFAULT_PWM_POS;
-
-	mutex_init(&st->platform.risc.mbx_if_lock);
-	mutex_init(&st->platform.risc.mbx_lock);
-	mutex_init(&st->platform.risc.mem_lock);
-	mutex_init(&st->platform.risc.mem_mbx_lock);
-	mutex_init(&st->demod_lock);
-	st->get_frontend_internal = 0;
-
-	st->pid_ctrl_index = -2;
-
-	st->fe[0] = fe;
-	fe->demodulator_priv = st;
-	memcpy(&st->fe[0]->ops, &dib9000_ops, sizeof(struct dvb_frontend_ops));
-
-	/* Ensure the output mode remains at the previous default if it's
-	 * not specifically set by the caller.
-	 */
-	if ((st->chip.d9.cfg.output_mode != OUTMODE_MPEG2_SERIAL) && (st->chip.d9.cfg.output_mode != OUTMODE_MPEG2_PAR_GATED_CLK))
-		st->chip.d9.cfg.output_mode = OUTMODE_MPEG2_FIFO;
-
-	if (dib9000_identify(&st->i2c) == 0)
-		goto error;
-
-	dibx000_init_i2c_master(&st->i2c_master, DIB7000MC, st->i2c.i2c_adap, st->i2c.i2c_addr);
-
-	st->tuner_adap.dev.parent = i2c_adap->dev.parent;
-	strncpy(st->tuner_adap.name, "DIB9000_FW TUNER ACCESS", sizeof(st->tuner_adap.name));
-	st->tuner_adap.algo = &dib9000_tuner_algo;
-	st->tuner_adap.algo_data = NULL;
-	i2c_set_adapdata(&st->tuner_adap, st);
-	if (i2c_add_adapter(&st->tuner_adap) < 0)
-		goto error;
-
-	st->component_bus.dev.parent = i2c_adap->dev.parent;
-	strncpy(st->component_bus.name, "DIB9000_FW COMPONENT BUS ACCESS", sizeof(st->component_bus.name));
-	st->component_bus.algo = &dib9000_component_bus_algo;
-	st->component_bus.algo_data = NULL;
-	st->component_bus_speed = 340;
-	i2c_set_adapdata(&st->component_bus, st);
-	if (i2c_add_adapter(&st->component_bus) < 0)
-		goto component_bus_add_error;
-
-	dib9000_fw_reset(fe);
-
-	return fe;
-
-component_bus_add_error:
-	i2c_del_adapter(&st->tuner_adap);
-error:
-	kfree(st);
-	return NULL;
-}
-EXPORT_SYMBOL(dib9000_attach);
-
-static struct dvb_frontend_ops dib9000_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		 .name = "DiBcom 9000",
-		 .frequency_min = 44250000,
-		 .frequency_max = 867250000,
-		 .frequency_stepsize = 62500,
-		 .caps = FE_CAN_INVERSION_AUTO |
-		 FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-		 FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-		 FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-		 FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER | FE_CAN_HIERARCHY_AUTO,
-		 },
-
-	.release = dib9000_release,
-
-	.init = dib9000_wakeup,
-	.sleep = dib9000_sleep,
-
-	.set_frontend = dib9000_set_frontend,
-	.get_tune_settings = dib9000_fe_get_tune_settings,
-	.get_frontend = dib9000_get_frontend,
-
-	.read_status = dib9000_read_status,
-	.read_ber = dib9000_read_ber,
-	.read_signal_strength = dib9000_read_signal_strength,
-	.read_snr = dib9000_read_snr,
-	.read_ucblocks = dib9000_read_unc_blocks,
-};
-
-MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
-MODULE_AUTHOR("Olivier Grenie <ogrenie@dibcom.fr>");
-MODULE_DESCRIPTION("Driver for the DiBcom 9000 COFDM demodulator");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/dib9000.h b/drivers/media/dvb/frontends/dib9000.h
deleted file mode 100644
index b5781a4..0000000
--- a/drivers/media/dvb/frontends/dib9000.h
+++ /dev/null
@@ -1,131 +0,0 @@
-#ifndef DIB9000_H
-#define DIB9000_H
-
-#include "dibx000_common.h"
-
-struct dib9000_config {
-	u8 dvbt_mode;
-	u8 output_mpeg2_in_188_bytes;
-	u8 hostbus_diversity;
-	struct dibx000_bandwidth_config *bw;
-
-	u16 if_drives;
-
-	u32 timing_frequency;
-	u32 xtal_clock_khz;
-	u32 vcxo_timer;
-	u32 demod_clock_khz;
-
-	const u8 *microcode_B_fe_buffer;
-	u32 microcode_B_fe_size;
-
-	struct dibGPIOFunction gpio_function[2];
-	struct dibSubbandSelection subband;
-
-	u8 output_mode;
-};
-
-#define DEFAULT_DIB9000_I2C_ADDRESS 18
-
-#if defined(CONFIG_DVB_DIB9000) || (defined(CONFIG_DVB_DIB9000_MODULE) && defined(MODULE))
-extern struct dvb_frontend *dib9000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, const struct dib9000_config *cfg);
-extern int dib9000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr);
-extern struct i2c_adapter *dib9000_get_tuner_interface(struct dvb_frontend *fe);
-extern struct i2c_adapter *dib9000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface intf, int gating);
-extern int dib9000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val);
-extern int dib9000_fw_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff);
-extern int dib9000_fw_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff);
-extern int dib9000_firmware_post_pll_init(struct dvb_frontend *fe);
-extern int dib9000_set_slave_frontend(struct dvb_frontend *fe, struct dvb_frontend *fe_slave);
-extern int dib9000_remove_slave_frontend(struct dvb_frontend *fe);
-extern struct dvb_frontend *dib9000_get_slave_frontend(struct dvb_frontend *fe, int slave_index);
-extern struct i2c_adapter *dib9000_get_component_bus_interface(struct dvb_frontend *fe);
-extern int dib9000_set_i2c_adapter(struct dvb_frontend *fe, struct i2c_adapter *i2c);
-extern int dib9000_fw_set_component_bus_speed(struct dvb_frontend *fe, u16 speed);
-#else
-static inline struct dvb_frontend *dib9000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib9000_config *cfg)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-static inline struct i2c_adapter *dib9000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface intf, int gating)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-static inline int dib9000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline struct i2c_adapter *dib9000_get_tuner_interface(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-static inline int dib9000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib9000_fw_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib9000_fw_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib9000_firmware_post_pll_init(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib9000_set_slave_frontend(struct dvb_frontend *fe, struct dvb_frontend *fe_slave)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-int dib9000_remove_slave_frontend(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline struct dvb_frontend *dib9000_get_slave_frontend(struct dvb_frontend *fe, int slave_index)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-static inline struct i2c_adapter *dib9000_get_component_bus_interface(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-static inline int dib9000_set_i2c_adapter(struct dvb_frontend *fe, struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-
-static inline int dib9000_fw_set_component_bus_speed(struct dvb_frontend *fe, u16 speed)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-#endif
-
-#endif
diff --git a/drivers/media/dvb/frontends/dibx000_common.c b/drivers/media/dvb/frontends/dibx000_common.c
deleted file mode 100644
index 43be723..0000000
--- a/drivers/media/dvb/frontends/dibx000_common.c
+++ /dev/null
@@ -1,515 +0,0 @@
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-#include <linux/module.h>
-
-#include "dibx000_common.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
-
-#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiBX000: "); printk(args); printk("\n"); } } while (0)
-
-static int dibx000_write_word(struct dibx000_i2c_master *mst, u16 reg, u16 val)
-{
-	int ret;
-
-	if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
-		return -EINVAL;
-	}
-
-	mst->i2c_write_buffer[0] = (reg >> 8) & 0xff;
-	mst->i2c_write_buffer[1] = reg & 0xff;
-	mst->i2c_write_buffer[2] = (val >> 8) & 0xff;
-	mst->i2c_write_buffer[3] = val & 0xff;
-
-	memset(mst->msg, 0, sizeof(struct i2c_msg));
-	mst->msg[0].addr = mst->i2c_addr;
-	mst->msg[0].flags = 0;
-	mst->msg[0].buf = mst->i2c_write_buffer;
-	mst->msg[0].len = 4;
-
-	ret = i2c_transfer(mst->i2c_adap, mst->msg, 1) != 1 ? -EREMOTEIO : 0;
-	mutex_unlock(&mst->i2c_buffer_lock);
-
-	return ret;
-}
-
-static u16 dibx000_read_word(struct dibx000_i2c_master *mst, u16 reg)
-{
-	u16 ret;
-
-	if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
-		return 0;
-	}
-
-	mst->i2c_write_buffer[0] = reg >> 8;
-	mst->i2c_write_buffer[1] = reg & 0xff;
-
-	memset(mst->msg, 0, 2 * sizeof(struct i2c_msg));
-	mst->msg[0].addr = mst->i2c_addr;
-	mst->msg[0].flags = 0;
-	mst->msg[0].buf = mst->i2c_write_buffer;
-	mst->msg[0].len = 2;
-	mst->msg[1].addr = mst->i2c_addr;
-	mst->msg[1].flags = I2C_M_RD;
-	mst->msg[1].buf = mst->i2c_read_buffer;
-	mst->msg[1].len = 2;
-
-	if (i2c_transfer(mst->i2c_adap, mst->msg, 2) != 2)
-		dprintk("i2c read error on %d", reg);
-
-	ret = (mst->i2c_read_buffer[0] << 8) | mst->i2c_read_buffer[1];
-	mutex_unlock(&mst->i2c_buffer_lock);
-
-	return ret;
-}
-
-static int dibx000_is_i2c_done(struct dibx000_i2c_master *mst)
-{
-	int i = 100;
-	u16 status;
-
-	while (((status = dibx000_read_word(mst, mst->base_reg + 2)) & 0x0100) == 0 && --i > 0)
-		;
-
-	/* i2c timed out */
-	if (i == 0)
-		return -EREMOTEIO;
-
-	/* no acknowledge */
-	if ((status & 0x0080) == 0)
-		return -EREMOTEIO;
-
-	return 0;
-}
-
-static int dibx000_master_i2c_write(struct dibx000_i2c_master *mst, struct i2c_msg *msg, u8 stop)
-{
-	u16 data;
-	u16 da;
-	u16 i;
-	u16 txlen = msg->len, len;
-	const u8 *b = msg->buf;
-
-	while (txlen) {
-		dibx000_read_word(mst, mst->base_reg + 2);
-
-		len = txlen > 8 ? 8 : txlen;
-		for (i = 0; i < len; i += 2) {
-			data = *b++ << 8;
-			if (i+1 < len)
-				data |= *b++;
-			dibx000_write_word(mst, mst->base_reg, data);
-		}
-		da = (((u8) (msg->addr))  << 9) |
-			(1           << 8) |
-			(1           << 7) |
-			(0           << 6) |
-			(0           << 5) |
-			((len & 0x7) << 2) |
-			(0           << 1) |
-			(0           << 0);
-
-		if (txlen == msg->len)
-			da |= 1 << 5; /* start */
-
-		if (txlen-len == 0 && stop)
-			da |= 1 << 6; /* stop */
-
-		dibx000_write_word(mst, mst->base_reg+1, da);
-
-		if (dibx000_is_i2c_done(mst) != 0)
-			return -EREMOTEIO;
-		txlen -= len;
-	}
-
-	return 0;
-}
-
-static int dibx000_master_i2c_read(struct dibx000_i2c_master *mst, struct i2c_msg *msg)
-{
-	u16 da;
-	u8 *b = msg->buf;
-	u16 rxlen = msg->len, len;
-
-	while (rxlen) {
-		len = rxlen > 8 ? 8 : rxlen;
-		da = (((u8) (msg->addr)) << 9) |
-			(1           << 8) |
-			(1           << 7) |
-			(0           << 6) |
-			(0           << 5) |
-			((len & 0x7) << 2) |
-			(1           << 1) |
-			(0           << 0);
-
-		if (rxlen == msg->len)
-			da |= 1 << 5; /* start */
-
-		if (rxlen-len == 0)
-			da |= 1 << 6; /* stop */
-		dibx000_write_word(mst, mst->base_reg+1, da);
-
-		if (dibx000_is_i2c_done(mst) != 0)
-			return -EREMOTEIO;
-
-		rxlen -= len;
-
-		while (len) {
-			da = dibx000_read_word(mst, mst->base_reg);
-			*b++ = (da >> 8) & 0xff;
-			len--;
-			if (len >= 1) {
-				*b++ =  da   & 0xff;
-				len--;
-			}
-		}
-	}
-
-	return 0;
-}
-
-int dibx000_i2c_set_speed(struct i2c_adapter *i2c_adap, u16 speed)
-{
-	struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap);
-
-	if (mst->device_rev < DIB7000MC && speed < 235)
-		speed = 235;
-	return dibx000_write_word(mst, mst->base_reg + 3, (u16)(60000 / speed));
-
-}
-EXPORT_SYMBOL(dibx000_i2c_set_speed);
-
-static u32 dibx000_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static int dibx000_i2c_select_interface(struct dibx000_i2c_master *mst,
-					enum dibx000_i2c_interface intf)
-{
-	if (mst->device_rev > DIB3000MC && mst->selected_interface != intf) {
-		dprintk("selecting interface: %d", intf);
-		mst->selected_interface = intf;
-		return dibx000_write_word(mst, mst->base_reg + 4, intf);
-	}
-	return 0;
-}
-
-static int dibx000_i2c_master_xfer_gpio12(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num)
-{
-	struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap);
-	int msg_index;
-	int ret = 0;
-
-	dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_GPIO_1_2);
-	for (msg_index = 0; msg_index < num; msg_index++) {
-		if (msg[msg_index].flags & I2C_M_RD) {
-			ret = dibx000_master_i2c_read(mst, &msg[msg_index]);
-			if (ret != 0)
-				return 0;
-		} else {
-			ret = dibx000_master_i2c_write(mst, &msg[msg_index], 1);
-			if (ret != 0)
-				return 0;
-		}
-	}
-
-	return num;
-}
-
-static int dibx000_i2c_master_xfer_gpio34(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num)
-{
-	struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap);
-	int msg_index;
-	int ret = 0;
-
-	dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_GPIO_3_4);
-	for (msg_index = 0; msg_index < num; msg_index++) {
-		if (msg[msg_index].flags & I2C_M_RD) {
-			ret = dibx000_master_i2c_read(mst, &msg[msg_index]);
-			if (ret != 0)
-				return 0;
-		} else {
-			ret = dibx000_master_i2c_write(mst, &msg[msg_index], 1);
-			if (ret != 0)
-				return 0;
-		}
-	}
-
-	return num;
-}
-
-static struct i2c_algorithm dibx000_i2c_master_gpio12_xfer_algo = {
-	.master_xfer = dibx000_i2c_master_xfer_gpio12,
-	.functionality = dibx000_i2c_func,
-};
-
-static struct i2c_algorithm dibx000_i2c_master_gpio34_xfer_algo = {
-	.master_xfer = dibx000_i2c_master_xfer_gpio34,
-	.functionality = dibx000_i2c_func,
-};
-
-static int dibx000_i2c_gate_ctrl(struct dibx000_i2c_master *mst, u8 tx[4],
-				 u8 addr, int onoff)
-{
-	u16 val;
-
-
-	if (onoff)
-		val = addr << 8;	// bit 7 = use master or not, if 0, the gate is open
-	else
-		val = 1 << 7;
-
-	if (mst->device_rev > DIB7000)
-		val <<= 1;
-
-	tx[0] = (((mst->base_reg + 1) >> 8) & 0xff);
-	tx[1] = ((mst->base_reg + 1) & 0xff);
-	tx[2] = val >> 8;
-	tx[3] = val & 0xff;
-
-	return 0;
-}
-
-static int dibx000_i2c_gated_gpio67_xfer(struct i2c_adapter *i2c_adap,
-					struct i2c_msg msg[], int num)
-{
-	struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap);
-	int ret;
-
-	if (num > 32) {
-		dprintk("%s: too much I2C message to be transmitted (%i).\
-				Maximum is 32", __func__, num);
-		return -ENOMEM;
-	}
-
-	dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_GPIO_6_7);
-
-	if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
-		return -EINVAL;
-	}
-
-	memset(mst->msg, 0, sizeof(struct i2c_msg) * (2 + num));
-
-	/* open the gate */
-	dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[0], msg[0].addr, 1);
-	mst->msg[0].addr = mst->i2c_addr;
-	mst->msg[0].buf = &mst->i2c_write_buffer[0];
-	mst->msg[0].len = 4;
-
-	memcpy(&mst->msg[1], msg, sizeof(struct i2c_msg) * num);
-
-	/* close the gate */
-	dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[4], 0, 0);
-	mst->msg[num + 1].addr = mst->i2c_addr;
-	mst->msg[num + 1].buf = &mst->i2c_write_buffer[4];
-	mst->msg[num + 1].len = 4;
-
-	ret = (i2c_transfer(mst->i2c_adap, mst->msg, 2 + num) == 2 + num ?
-			num : -EIO);
-
-	mutex_unlock(&mst->i2c_buffer_lock);
-	return ret;
-}
-
-static struct i2c_algorithm dibx000_i2c_gated_gpio67_algo = {
-	.master_xfer = dibx000_i2c_gated_gpio67_xfer,
-	.functionality = dibx000_i2c_func,
-};
-
-static int dibx000_i2c_gated_tuner_xfer(struct i2c_adapter *i2c_adap,
-					struct i2c_msg msg[], int num)
-{
-	struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap);
-	int ret;
-
-	if (num > 32) {
-		dprintk("%s: too much I2C message to be transmitted (%i).\
-				Maximum is 32", __func__, num);
-		return -ENOMEM;
-	}
-
-	dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_TUNER);
-
-	if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
-		return -EINVAL;
-	}
-	memset(mst->msg, 0, sizeof(struct i2c_msg) * (2 + num));
-
-	/* open the gate */
-	dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[0], msg[0].addr, 1);
-	mst->msg[0].addr = mst->i2c_addr;
-	mst->msg[0].buf = &mst->i2c_write_buffer[0];
-	mst->msg[0].len = 4;
-
-	memcpy(&mst->msg[1], msg, sizeof(struct i2c_msg) * num);
-
-	/* close the gate */
-	dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[4], 0, 0);
-	mst->msg[num + 1].addr = mst->i2c_addr;
-	mst->msg[num + 1].buf = &mst->i2c_write_buffer[4];
-	mst->msg[num + 1].len = 4;
-
-	ret = (i2c_transfer(mst->i2c_adap, mst->msg, 2 + num) == 2 + num ?
-			num : -EIO);
-	mutex_unlock(&mst->i2c_buffer_lock);
-	return ret;
-}
-
-static struct i2c_algorithm dibx000_i2c_gated_tuner_algo = {
-	.master_xfer = dibx000_i2c_gated_tuner_xfer,
-	.functionality = dibx000_i2c_func,
-};
-
-struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master *mst,
-						enum dibx000_i2c_interface intf,
-						int gating)
-{
-	struct i2c_adapter *i2c = NULL;
-
-	switch (intf) {
-	case DIBX000_I2C_INTERFACE_TUNER:
-		if (gating)
-			i2c = &mst->gated_tuner_i2c_adap;
-		break;
-	case DIBX000_I2C_INTERFACE_GPIO_1_2:
-		if (!gating)
-			i2c = &mst->master_i2c_adap_gpio12;
-		break;
-	case DIBX000_I2C_INTERFACE_GPIO_3_4:
-		if (!gating)
-			i2c = &mst->master_i2c_adap_gpio34;
-		break;
-	case DIBX000_I2C_INTERFACE_GPIO_6_7:
-		if (gating)
-			i2c = &mst->master_i2c_adap_gpio67;
-		break;
-	default:
-		printk(KERN_ERR "DiBX000: incorrect I2C interface selected\n");
-		break;
-	}
-
-	return i2c;
-}
-
-EXPORT_SYMBOL(dibx000_get_i2c_adapter);
-
-void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst)
-{
-	/* initialize the i2c-master by closing the gate */
-	u8 tx[4];
-	struct i2c_msg m = {.addr = mst->i2c_addr,.buf = tx,.len = 4 };
-
-	dibx000_i2c_gate_ctrl(mst, tx, 0, 0);
-	i2c_transfer(mst->i2c_adap, &m, 1);
-	mst->selected_interface = 0xff;	// the first time force a select of the I2C
-	dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_TUNER);
-}
-
-EXPORT_SYMBOL(dibx000_reset_i2c_master);
-
-static int i2c_adapter_init(struct i2c_adapter *i2c_adap,
-				struct i2c_algorithm *algo, const char *name,
-				struct dibx000_i2c_master *mst)
-{
-	strncpy(i2c_adap->name, name, sizeof(i2c_adap->name));
-	i2c_adap->algo = algo;
-	i2c_adap->algo_data = NULL;
-	i2c_set_adapdata(i2c_adap, mst);
-	if (i2c_add_adapter(i2c_adap) < 0)
-		return -ENODEV;
-	return 0;
-}
-
-int dibx000_init_i2c_master(struct dibx000_i2c_master *mst, u16 device_rev,
-				struct i2c_adapter *i2c_adap, u8 i2c_addr)
-{
-	int ret;
-
-	mutex_init(&mst->i2c_buffer_lock);
-	if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
-		return -EINVAL;
-	}
-	memset(mst->msg, 0, sizeof(struct i2c_msg));
-	mst->msg[0].addr = i2c_addr >> 1;
-	mst->msg[0].flags = 0;
-	mst->msg[0].buf = mst->i2c_write_buffer;
-	mst->msg[0].len = 4;
-
-	mst->device_rev = device_rev;
-	mst->i2c_adap = i2c_adap;
-	mst->i2c_addr = i2c_addr >> 1;
-
-	if (device_rev == DIB7000P || device_rev == DIB8000)
-		mst->base_reg = 1024;
-	else
-		mst->base_reg = 768;
-
-	mst->gated_tuner_i2c_adap.dev.parent = mst->i2c_adap->dev.parent;
-	if (i2c_adapter_init
-			(&mst->gated_tuner_i2c_adap, &dibx000_i2c_gated_tuner_algo,
-			 "DiBX000 tuner I2C bus", mst) != 0)
-		printk(KERN_ERR
-				"DiBX000: could not initialize the tuner i2c_adapter\n");
-
-	mst->master_i2c_adap_gpio12.dev.parent = mst->i2c_adap->dev.parent;
-	if (i2c_adapter_init
-			(&mst->master_i2c_adap_gpio12, &dibx000_i2c_master_gpio12_xfer_algo,
-			 "DiBX000 master GPIO12 I2C bus", mst) != 0)
-		printk(KERN_ERR
-				"DiBX000: could not initialize the master i2c_adapter\n");
-
-	mst->master_i2c_adap_gpio34.dev.parent = mst->i2c_adap->dev.parent;
-	if (i2c_adapter_init
-			(&mst->master_i2c_adap_gpio34, &dibx000_i2c_master_gpio34_xfer_algo,
-			 "DiBX000 master GPIO34 I2C bus", mst) != 0)
-		printk(KERN_ERR
-				"DiBX000: could not initialize the master i2c_adapter\n");
-
-	mst->master_i2c_adap_gpio67.dev.parent = mst->i2c_adap->dev.parent;
-	if (i2c_adapter_init
-			(&mst->master_i2c_adap_gpio67, &dibx000_i2c_gated_gpio67_algo,
-			 "DiBX000 master GPIO67 I2C bus", mst) != 0)
-		printk(KERN_ERR
-				"DiBX000: could not initialize the master i2c_adapter\n");
-
-	/* initialize the i2c-master by closing the gate */
-	dibx000_i2c_gate_ctrl(mst, mst->i2c_write_buffer, 0, 0);
-
-	ret = (i2c_transfer(i2c_adap, mst->msg, 1) == 1);
-	mutex_unlock(&mst->i2c_buffer_lock);
-
-	return ret;
-}
-
-EXPORT_SYMBOL(dibx000_init_i2c_master);
-
-void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst)
-{
-	i2c_del_adapter(&mst->gated_tuner_i2c_adap);
-	i2c_del_adapter(&mst->master_i2c_adap_gpio12);
-	i2c_del_adapter(&mst->master_i2c_adap_gpio34);
-	i2c_del_adapter(&mst->master_i2c_adap_gpio67);
-}
-EXPORT_SYMBOL(dibx000_exit_i2c_master);
-
-
-u32 systime(void)
-{
-	struct timespec t;
-
-	t = current_kernel_time();
-	return (t.tv_sec * 10000) + (t.tv_nsec / 100000);
-}
-EXPORT_SYMBOL(systime);
-
-MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
-MODULE_DESCRIPTION("Common function the DiBcom demodulator family");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/dibx000_common.h b/drivers/media/dvb/frontends/dibx000_common.h
deleted file mode 100644
index 5f48488..0000000
--- a/drivers/media/dvb/frontends/dibx000_common.h
+++ /dev/null
@@ -1,280 +0,0 @@
-#ifndef DIBX000_COMMON_H
-#define DIBX000_COMMON_H
-
-enum dibx000_i2c_interface {
-	DIBX000_I2C_INTERFACE_TUNER = 0,
-	DIBX000_I2C_INTERFACE_GPIO_1_2 = 1,
-	DIBX000_I2C_INTERFACE_GPIO_3_4 = 2,
-	DIBX000_I2C_INTERFACE_GPIO_6_7 = 3
-};
-
-struct dibx000_i2c_master {
-#define DIB3000MC 1
-#define DIB7000   2
-#define DIB7000P  11
-#define DIB7000MC 12
-#define DIB8000   13
-	u16 device_rev;
-
-	enum dibx000_i2c_interface selected_interface;
-
-/*	struct i2c_adapter  tuner_i2c_adap; */
-	struct i2c_adapter gated_tuner_i2c_adap;
-	struct i2c_adapter master_i2c_adap_gpio12;
-	struct i2c_adapter master_i2c_adap_gpio34;
-	struct i2c_adapter master_i2c_adap_gpio67;
-
-	struct i2c_adapter *i2c_adap;
-	u8 i2c_addr;
-
-	u16 base_reg;
-
-	/* for the I2C transfer */
-	struct i2c_msg msg[34];
-	u8 i2c_write_buffer[8];
-	u8 i2c_read_buffer[2];
-	struct mutex i2c_buffer_lock;
-};
-
-extern int dibx000_init_i2c_master(struct dibx000_i2c_master *mst,
-					u16 device_rev, struct i2c_adapter *i2c_adap,
-					u8 i2c_addr);
-extern struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master
-							*mst,
-							enum dibx000_i2c_interface
-							intf, int gating);
-extern void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst);
-extern void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst);
-extern int dibx000_i2c_set_speed(struct i2c_adapter *i2c_adap, u16 speed);
-
-extern u32 systime(void);
-
-#define BAND_LBAND 0x01
-#define BAND_UHF   0x02
-#define BAND_VHF   0x04
-#define BAND_SBAND 0x08
-#define BAND_FM	   0x10
-#define BAND_CBAND 0x20
-
-#define BAND_OF_FREQUENCY(freq_kHz) ((freq_kHz) <= 170000 ? BAND_CBAND : \
-									(freq_kHz) <= 115000 ? BAND_FM : \
-									(freq_kHz) <= 250000 ? BAND_VHF : \
-									(freq_kHz) <= 863000 ? BAND_UHF : \
-									(freq_kHz) <= 2000000 ? BAND_LBAND : BAND_SBAND )
-
-struct dibx000_agc_config {
-	/* defines the capabilities of this AGC-setting - using the BAND_-defines */
-	u8 band_caps;
-
-	u16 setup;
-
-	u16 inv_gain;
-	u16 time_stabiliz;
-
-	u8 alpha_level;
-	u16 thlock;
-
-	u8 wbd_inv;
-	u16 wbd_ref;
-	u8 wbd_sel;
-	u8 wbd_alpha;
-
-	u16 agc1_max;
-	u16 agc1_min;
-	u16 agc2_max;
-	u16 agc2_min;
-
-	u8 agc1_pt1;
-	u8 agc1_pt2;
-	u8 agc1_pt3;
-
-	u8 agc1_slope1;
-	u8 agc1_slope2;
-
-	u8 agc2_pt1;
-	u8 agc2_pt2;
-
-	u8 agc2_slope1;
-	u8 agc2_slope2;
-
-	u8 alpha_mant;
-	u8 alpha_exp;
-
-	u8 beta_mant;
-	u8 beta_exp;
-
-	u8 perform_agc_softsplit;
-
-	struct {
-		u16 min;
-		u16 max;
-		u16 min_thres;
-		u16 max_thres;
-	} split;
-};
-
-struct dibx000_bandwidth_config {
-	u32 internal;
-	u32 sampling;
-
-	u8 pll_prediv;
-	u8 pll_ratio;
-	u8 pll_range;
-	u8 pll_reset;
-	u8 pll_bypass;
-
-	u8 enable_refdiv;
-	u8 bypclk_div;
-	u8 IO_CLK_en_core;
-	u8 ADClkSrc;
-	u8 modulo;
-
-	u16 sad_cfg;
-
-	u32 ifreq;
-	u32 timf;
-
-	u32 xtal_hz;
-};
-
-enum dibx000_adc_states {
-	DIBX000_SLOW_ADC_ON = 0,
-	DIBX000_SLOW_ADC_OFF,
-	DIBX000_ADC_ON,
-	DIBX000_ADC_OFF,
-	DIBX000_VBG_ENABLE,
-	DIBX000_VBG_DISABLE,
-};
-
-#define BANDWIDTH_TO_KHZ(v)	((v) / 1000)
-#define BANDWIDTH_TO_HZ(v)	((v) * 1000)
-
-/* Chip output mode. */
-#define OUTMODE_HIGH_Z              0
-#define OUTMODE_MPEG2_PAR_GATED_CLK 1
-#define OUTMODE_MPEG2_PAR_CONT_CLK  2
-#define OUTMODE_MPEG2_SERIAL        7
-#define OUTMODE_DIVERSITY           4
-#define OUTMODE_MPEG2_FIFO          5
-#define OUTMODE_ANALOG_ADC          6
-
-#define INPUT_MODE_OFF                0x11
-#define INPUT_MODE_DIVERSITY          0x12
-#define INPUT_MODE_MPEG               0x13
-
-enum frontend_tune_state {
-	CT_TUNER_START = 10,
-	CT_TUNER_STEP_0,
-	CT_TUNER_STEP_1,
-	CT_TUNER_STEP_2,
-	CT_TUNER_STEP_3,
-	CT_TUNER_STEP_4,
-	CT_TUNER_STEP_5,
-	CT_TUNER_STEP_6,
-	CT_TUNER_STEP_7,
-	CT_TUNER_STOP,
-
-	CT_AGC_START = 20,
-	CT_AGC_STEP_0,
-	CT_AGC_STEP_1,
-	CT_AGC_STEP_2,
-	CT_AGC_STEP_3,
-	CT_AGC_STEP_4,
-	CT_AGC_STOP,
-
-	CT_DEMOD_START = 30,
-	CT_DEMOD_STEP_1,
-	CT_DEMOD_STEP_2,
-	CT_DEMOD_STEP_3,
-	CT_DEMOD_STEP_4,
-	CT_DEMOD_STEP_5,
-	CT_DEMOD_STEP_6,
-	CT_DEMOD_STEP_7,
-	CT_DEMOD_STEP_8,
-	CT_DEMOD_STEP_9,
-	CT_DEMOD_STEP_10,
-	CT_DEMOD_SEARCH_NEXT = 41,
-	CT_DEMOD_STEP_LOCKED,
-	CT_DEMOD_STOP,
-
-	CT_DONE = 100,
-	CT_SHUTDOWN,
-
-};
-
-struct dvb_frontend_parametersContext {
-#define CHANNEL_STATUS_PARAMETERS_UNKNOWN   0x01
-#define CHANNEL_STATUS_PARAMETERS_SET       0x02
-	u8 status;
-	u32 tune_time_estimation[2];
-	s32 tps_available;
-	u16 tps[9];
-};
-
-#define FE_STATUS_TUNE_FAILED          0
-#define FE_STATUS_TUNE_TIMED_OUT      -1
-#define FE_STATUS_TUNE_TIME_TOO_SHORT -2
-#define FE_STATUS_TUNE_PENDING        -3
-#define FE_STATUS_STD_SUCCESS         -4
-#define FE_STATUS_FFT_SUCCESS         -5
-#define FE_STATUS_DEMOD_SUCCESS       -6
-#define FE_STATUS_LOCKED              -7
-#define FE_STATUS_DATA_LOCKED         -8
-
-#define FE_CALLBACK_TIME_NEVER 0xffffffff
-
-#define ABS(x) ((x < 0) ? (-x) : (x))
-
-#define DATA_BUS_ACCESS_MODE_8BIT                 0x01
-#define DATA_BUS_ACCESS_MODE_16BIT                0x02
-#define DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT 0x10
-
-struct dibGPIOFunction {
-#define BOARD_GPIO_COMPONENT_BUS_ADAPTER 1
-#define BOARD_GPIO_COMPONENT_DEMOD       2
-	u8 component;
-
-#define BOARD_GPIO_FUNCTION_BOARD_ON      1
-#define BOARD_GPIO_FUNCTION_BOARD_OFF     2
-#define BOARD_GPIO_FUNCTION_COMPONENT_ON  3
-#define BOARD_GPIO_FUNCTION_COMPONENT_OFF 4
-#define BOARD_GPIO_FUNCTION_SUBBAND_PWM   5
-#define BOARD_GPIO_FUNCTION_SUBBAND_GPIO   6
-	u8 function;
-
-/* mask, direction and value are used specify which GPIO to change GPIO0
- * is LSB and possible GPIO31 is MSB.  The same bit-position as in the
- * mask is used for the direction and the value. Direction == 1 is OUT,
- * 0 == IN. For direction "OUT" value is either 1 or 0, for direction IN
- * value has no meaning.
- *
- * In case of BOARD_GPIO_FUNCTION_PWM mask is giving the GPIO to be
- * used to do the PWM. Direction gives the PWModulator to be used.
- * Value gives the PWM value in device-dependent scale.
- */
-	u32 mask;
-	u32 direction;
-	u32 value;
-};
-
-#define MAX_NB_SUBBANDS   8
-struct dibSubbandSelection {
-	u8  size; /* Actual number of subbands. */
-	struct {
-		u16 f_mhz;
-		struct dibGPIOFunction gpio;
-	} subband[MAX_NB_SUBBANDS];
-};
-
-#define DEMOD_TIMF_SET    0x00
-#define DEMOD_TIMF_GET    0x01
-#define DEMOD_TIMF_UPDATE 0x02
-
-#define MPEG_ON_DIBTX		1
-#define DIV_ON_DIBTX		2
-#define ADC_ON_DIBTX		3
-#define DEMOUT_ON_HOSTBUS	4
-#define DIBTX_ON_HOSTBUS	5
-#define MPEG_ON_HOSTBUS		6
-
-#endif
diff --git a/drivers/media/dvb/frontends/drxd.h b/drivers/media/dvb/frontends/drxd.h
deleted file mode 100644
index 216c8c3..0000000
--- a/drivers/media/dvb/frontends/drxd.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * drxd.h: DRXD DVB-T demodulator driver
- *
- * Copyright (C) 2005-2007 Micronas
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 only, as published by the Free Software Foundation.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef _DRXD_H_
-#define _DRXD_H_
-
-#include <linux/types.h>
-#include <linux/i2c.h>
-
-struct drxd_config {
-	u8 index;
-
-	u8 pll_address;
-	u8 pll_type;
-#define DRXD_PLL_NONE     0
-#define DRXD_PLL_DTT7520X 1
-#define DRXD_PLL_MT3X0823 2
-
-	u32 clock;
-	u8 insert_rs_byte;
-
-	u8 demod_address;
-	u8 demoda_address;
-	u8 demod_revision;
-
-	/* If the tuner is not behind an i2c gate, be sure to flip this bit
-	   or else the i2c bus could get wedged */
-	u8 disable_i2c_gate_ctrl;
-
-	u32 IF;
-	 s16(*osc_deviation) (void *priv, s16 dev, int flag);
-};
-
-#if defined(CONFIG_DVB_DRXD) || \
-			(defined(CONFIG_DVB_DRXD_MODULE) && defined(MODULE))
-extern
-struct dvb_frontend *drxd_attach(const struct drxd_config *config,
-				 void *priv, struct i2c_adapter *i2c,
-				 struct device *dev);
-#else
-static inline
-struct dvb_frontend *drxd_attach(const struct drxd_config *config,
-				 void *priv, struct i2c_adapter *i2c,
-				 struct device *dev)
-{
-	printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n",
-	       __func__);
-	return NULL;
-}
-#endif
-
-extern int drxd_config_i2c(struct dvb_frontend *, int);
-#endif
diff --git a/drivers/media/dvb/frontends/drxd_firm.c b/drivers/media/dvb/frontends/drxd_firm.c
deleted file mode 100644
index 5418b0b..0000000
--- a/drivers/media/dvb/frontends/drxd_firm.c
+++ /dev/null
@@ -1,929 +0,0 @@
-/*
- * drxd_firm.c : DRXD firmware tables
- *
- * Copyright (C) 2006-2007 Micronas
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 only, as published by the Free Software Foundation.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- */
-
-/* TODO: generate this file with a script from a settings file */
-
-/* Contains A2 firmware version: 1.4.2
- * Contains B1 firmware version: 3.3.33
- * Contains settings from driver 1.4.23
-*/
-
-#include "drxd_firm.h"
-
-#define ADDRESS(x)     ((x) & 0xFF), (((x)>>8) & 0xFF), (((x)>>16) & 0xFF), (((x)>>24) & 0xFF)
-#define LENGTH(x)      ((x) & 0xFF), (((x)>>8) & 0xFF)
-
-/* Is written via block write, must be little endian */
-#define DATA16(x)      ((x) & 0xFF), (((x)>>8) & 0xFF)
-
-#define WRBLOCK(a, l) ADDRESS(a), LENGTH(l)
-#define WR16(a, d) ADDRESS(a), LENGTH(1), DATA16(d)
-
-#define END_OF_TABLE      0xFF, 0xFF, 0xFF, 0xFF
-
-/* HI firmware patches */
-
-#define HI_TR_FUNC_ADDR HI_IF_RAM_USR_BEGIN__A
-#define HI_TR_FUNC_SIZE 9	/* size of this function in instruction words */
-
-u8 DRXD_InitAtomicRead[] = {
-	WRBLOCK(HI_TR_FUNC_ADDR, HI_TR_FUNC_SIZE),
-	0x26, 0x00,		/* 0         -> ring.rdy;           */
-	0x60, 0x04,		/* r0rami.dt -> ring.xba;           */
-	0x61, 0x04,		/* r0rami.dt -> ring.xad;           */
-	0xE3, 0x07,		/* HI_RA_RAM_USR_BEGIN -> ring.iad; */
-	0x40, 0x00,		/* (long immediate)                 */
-	0x64, 0x04,		/* r0rami.dt -> ring.len;           */
-	0x65, 0x04,		/* r0rami.dt -> ring.ctl;           */
-	0x26, 0x00,		/* 0         -> ring.rdy;           */
-	0x38, 0x00,		/* 0         -> jumps.ad;           */
-	END_OF_TABLE
-};
-
-/* Pins D0 and D1 of the parallel MPEG output can be used
-   to set the I2C address of a device. */
-
-#define HI_RST_FUNC_ADDR (HI_IF_RAM_USR_BEGIN__A + HI_TR_FUNC_SIZE)
-#define HI_RST_FUNC_SIZE 54	/* size of this function in instruction words */
-
-/* D0 Version */
-u8 DRXD_HiI2cPatch_1[] = {
-	WRBLOCK(HI_RST_FUNC_ADDR, HI_RST_FUNC_SIZE),
-	0xC8, 0x07, 0x01, 0x00,	/* MASK      -> reg0.dt;                        */
-	0xE0, 0x07, 0x15, 0x02,	/* (EC__BLK << 6) + EC_OC_REG__BNK -> ring.xba; */
-	0xE1, 0x07, 0x12, 0x00,	/* EC_OC_REG_OC_MPG_SIO__A -> ring.xad;         */
-	0xA2, 0x00,		/* M_BNK_ID_DAT -> ring.iba;                    */
-	0x23, 0x00,		/* &data     -> ring.iad;                       */
-	0x24, 0x00,		/* 0         -> ring.len;                       */
-	0xA5, 0x02,		/* M_RC_CTR_SWAP | M_RC_CTR_READ -> ring.ctl;   */
-	0x26, 0x00,		/* 0         -> ring.rdy;                       */
-	0x42, 0x00,		/* &data+1   -> w0ram.ad;                       */
-	0xC0, 0x07, 0xFF, 0x0F,	/* -1        -> w0ram.dt;                       */
-	0x63, 0x00,		/* &data+1   -> ring.iad;                       */
-	0x65, 0x02,		/* M_RC_CTR_SWAP | M_RC_CTR_WRITE -> ring.ctl;  */
-	0x26, 0x00,		/* 0         -> ring.rdy;                       */
-	0xE1, 0x07, 0x38, 0x00,	/* EC_OC_REG_OCR_MPG_USR_DAT__A -> ring.xad;    */
-	0xA5, 0x02,		/* M_RC_CTR_SWAP | M_RC_CTR_READ -> ring.ctl;   */
-	0x26, 0x00,		/* 0         -> ring.rdy;                       */
-	0xE1, 0x07, 0x12, 0x00,	/* EC_OC_REG_OC_MPG_SIO__A -> ring.xad;         */
-	0x23, 0x00,		/* &data     -> ring.iad;                       */
-	0x65, 0x02,		/* M_RC_CTR_SWAP | M_RC_CTR_WRITE -> ring.ctl;  */
-	0x26, 0x00,		/* 0         -> ring.rdy;                       */
-	0x42, 0x00,		/* &data+1   -> w0ram.ad;                       */
-	0x0F, 0x04,		/* r0ram.dt  -> and.op;                         */
-	0x1C, 0x06,		/* reg0.dt   -> and.tr;                         */
-	0xCF, 0x04,		/* and.rs    -> add.op;                         */
-	0xD0, 0x07, 0x70, 0x00,	/* DEF_DEV_ID -> add.tr;                        */
-	0xD0, 0x04,		/* add.rs    -> add.tr;                         */
-	0xC8, 0x04,		/* add.rs    -> reg0.dt;                        */
-	0x60, 0x00,		/* reg0.dt   -> w0ram.dt;                       */
-	0xC2, 0x07, 0x10, 0x00,	/* SLV0_BASE -> w0rami.ad;                      */
-	0x01, 0x00,		/* 0         -> w0rami.dt;                      */
-	0x01, 0x06,		/* reg0.dt   -> w0rami.dt;                      */
-	0xC2, 0x07, 0x20, 0x00,	/* SLV1_BASE -> w0rami.ad;                      */
-	0x01, 0x00,		/* 0         -> w0rami.dt;                      */
-	0x01, 0x06,		/* reg0.dt   -> w0rami.dt;                      */
-	0xC2, 0x07, 0x30, 0x00,	/* CMD_BASE  -> w0rami.ad;                      */
-	0x01, 0x00,		/* 0         -> w0rami.dt;                      */
-	0x01, 0x00,		/* 0         -> w0rami.dt;                      */
-	0x01, 0x00,		/* 0         -> w0rami.dt;                      */
-	0x68, 0x00,		/* M_IC_SEL_PT1 -> i2c.sel;                     */
-	0x29, 0x00,		/* M_IC_CMD_RESET -> i2c.cmd;                   */
-	0x28, 0x00,		/* M_IC_SEL_PT0 -> i2c.sel;                     */
-	0x29, 0x00,		/* M_IC_CMD_RESET -> i2c.cmd;                   */
-	0xF8, 0x07, 0x2F, 0x00,	/* 0x2F      -> jumps.ad;                       */
-
-	WR16((B_HI_IF_RAM_TRP_BPT0__AX + ((2 * 0) + 1)),
-	     (u16) (HI_RST_FUNC_ADDR & 0x3FF)),
-	WR16((B_HI_IF_RAM_TRP_BPT0__AX + ((2 * 1) + 1)),
-	     (u16) (HI_RST_FUNC_ADDR & 0x3FF)),
-	WR16((B_HI_IF_RAM_TRP_BPT0__AX + ((2 * 2) + 1)),
-	     (u16) (HI_RST_FUNC_ADDR & 0x3FF)),
-	WR16((B_HI_IF_RAM_TRP_BPT0__AX + ((2 * 3) + 1)),
-	     (u16) (HI_RST_FUNC_ADDR & 0x3FF)),
-
-	/* Force quick and dirty reset */
-	WR16(B_HI_CT_REG_COMM_STATE__A, 0),
-	END_OF_TABLE
-};
-
-/* D0,D1 Version */
-u8 DRXD_HiI2cPatch_3[] = {
-	WRBLOCK(HI_RST_FUNC_ADDR, HI_RST_FUNC_SIZE),
-	0xC8, 0x07, 0x03, 0x00,	/* MASK      -> reg0.dt;                        */
-	0xE0, 0x07, 0x15, 0x02,	/* (EC__BLK << 6) + EC_OC_REG__BNK -> ring.xba; */
-	0xE1, 0x07, 0x12, 0x00,	/* EC_OC_REG_OC_MPG_SIO__A -> ring.xad;         */
-	0xA2, 0x00,		/* M_BNK_ID_DAT -> ring.iba;                    */
-	0x23, 0x00,		/* &data     -> ring.iad;                       */
-	0x24, 0x00,		/* 0         -> ring.len;                       */
-	0xA5, 0x02,		/* M_RC_CTR_SWAP | M_RC_CTR_READ -> ring.ctl;   */
-	0x26, 0x00,		/* 0         -> ring.rdy;                       */
-	0x42, 0x00,		/* &data+1   -> w0ram.ad;                       */
-	0xC0, 0x07, 0xFF, 0x0F,	/* -1        -> w0ram.dt;                       */
-	0x63, 0x00,		/* &data+1   -> ring.iad;                       */
-	0x65, 0x02,		/* M_RC_CTR_SWAP | M_RC_CTR_WRITE -> ring.ctl;  */
-	0x26, 0x00,		/* 0         -> ring.rdy;                       */
-	0xE1, 0x07, 0x38, 0x00,	/* EC_OC_REG_OCR_MPG_USR_DAT__A -> ring.xad;    */
-	0xA5, 0x02,		/* M_RC_CTR_SWAP | M_RC_CTR_READ -> ring.ctl;   */
-	0x26, 0x00,		/* 0         -> ring.rdy;                       */
-	0xE1, 0x07, 0x12, 0x00,	/* EC_OC_REG_OC_MPG_SIO__A -> ring.xad;         */
-	0x23, 0x00,		/* &data     -> ring.iad;                       */
-	0x65, 0x02,		/* M_RC_CTR_SWAP | M_RC_CTR_WRITE -> ring.ctl;  */
-	0x26, 0x00,		/* 0         -> ring.rdy;                       */
-	0x42, 0x00,		/* &data+1   -> w0ram.ad;                       */
-	0x0F, 0x04,		/* r0ram.dt  -> and.op;                         */
-	0x1C, 0x06,		/* reg0.dt   -> and.tr;                         */
-	0xCF, 0x04,		/* and.rs    -> add.op;                         */
-	0xD0, 0x07, 0x70, 0x00,	/* DEF_DEV_ID -> add.tr;                        */
-	0xD0, 0x04,		/* add.rs    -> add.tr;                         */
-	0xC8, 0x04,		/* add.rs    -> reg0.dt;                        */
-	0x60, 0x00,		/* reg0.dt   -> w0ram.dt;                       */
-	0xC2, 0x07, 0x10, 0x00,	/* SLV0_BASE -> w0rami.ad;                      */
-	0x01, 0x00,		/* 0         -> w0rami.dt;                      */
-	0x01, 0x06,		/* reg0.dt   -> w0rami.dt;                      */
-	0xC2, 0x07, 0x20, 0x00,	/* SLV1_BASE -> w0rami.ad;                      */
-	0x01, 0x00,		/* 0         -> w0rami.dt;                      */
-	0x01, 0x06,		/* reg0.dt   -> w0rami.dt;                      */
-	0xC2, 0x07, 0x30, 0x00,	/* CMD_BASE  -> w0rami.ad;                      */
-	0x01, 0x00,		/* 0         -> w0rami.dt;                      */
-	0x01, 0x00,		/* 0         -> w0rami.dt;                      */
-	0x01, 0x00,		/* 0         -> w0rami.dt;                      */
-	0x68, 0x00,		/* M_IC_SEL_PT1 -> i2c.sel;                     */
-	0x29, 0x00,		/* M_IC_CMD_RESET -> i2c.cmd;                   */
-	0x28, 0x00,		/* M_IC_SEL_PT0 -> i2c.sel;                     */
-	0x29, 0x00,		/* M_IC_CMD_RESET -> i2c.cmd;                   */
-	0xF8, 0x07, 0x2F, 0x00,	/* 0x2F      -> jumps.ad;                       */
-
-	WR16((B_HI_IF_RAM_TRP_BPT0__AX + ((2 * 0) + 1)),
-	     (u16) (HI_RST_FUNC_ADDR & 0x3FF)),
-	WR16((B_HI_IF_RAM_TRP_BPT0__AX + ((2 * 1) + 1)),
-	     (u16) (HI_RST_FUNC_ADDR & 0x3FF)),
-	WR16((B_HI_IF_RAM_TRP_BPT0__AX + ((2 * 2) + 1)),
-	     (u16) (HI_RST_FUNC_ADDR & 0x3FF)),
-	WR16((B_HI_IF_RAM_TRP_BPT0__AX + ((2 * 3) + 1)),
-	     (u16) (HI_RST_FUNC_ADDR & 0x3FF)),
-
-	/* Force quick and dirty reset */
-	WR16(B_HI_CT_REG_COMM_STATE__A, 0),
-	END_OF_TABLE
-};
-
-u8 DRXD_ResetCEFR[] = {
-	WRBLOCK(CE_REG_FR_TREAL00__A, 57),
-	0x52, 0x00,		/* CE_REG_FR_TREAL00__A */
-	0x00, 0x00,		/* CE_REG_FR_TIMAG00__A */
-	0x52, 0x00,		/* CE_REG_FR_TREAL01__A */
-	0x00, 0x00,		/* CE_REG_FR_TIMAG01__A */
-	0x52, 0x00,		/* CE_REG_FR_TREAL02__A */
-	0x00, 0x00,		/* CE_REG_FR_TIMAG02__A */
-	0x52, 0x00,		/* CE_REG_FR_TREAL03__A */
-	0x00, 0x00,		/* CE_REG_FR_TIMAG03__A */
-	0x52, 0x00,		/* CE_REG_FR_TREAL04__A */
-	0x00, 0x00,		/* CE_REG_FR_TIMAG04__A */
-	0x52, 0x00,		/* CE_REG_FR_TREAL05__A */
-	0x00, 0x00,		/* CE_REG_FR_TIMAG05__A */
-	0x52, 0x00,		/* CE_REG_FR_TREAL06__A */
-	0x00, 0x00,		/* CE_REG_FR_TIMAG06__A */
-	0x52, 0x00,		/* CE_REG_FR_TREAL07__A */
-	0x00, 0x00,		/* CE_REG_FR_TIMAG07__A */
-	0x52, 0x00,		/* CE_REG_FR_TREAL08__A */
-	0x00, 0x00,		/* CE_REG_FR_TIMAG08__A */
-	0x52, 0x00,		/* CE_REG_FR_TREAL09__A */
-	0x00, 0x00,		/* CE_REG_FR_TIMAG09__A */
-	0x52, 0x00,		/* CE_REG_FR_TREAL10__A */
-	0x00, 0x00,		/* CE_REG_FR_TIMAG10__A */
-	0x52, 0x00,		/* CE_REG_FR_TREAL11__A */
-	0x00, 0x00,		/* CE_REG_FR_TIMAG11__A */
-
-	0x52, 0x00,		/* CE_REG_FR_MID_TAP__A */
-
-	0x0B, 0x00,		/* CE_REG_FR_SQS_G00__A */
-	0x0B, 0x00,		/* CE_REG_FR_SQS_G01__A */
-	0x0B, 0x00,		/* CE_REG_FR_SQS_G02__A */
-	0x0B, 0x00,		/* CE_REG_FR_SQS_G03__A */
-	0x0B, 0x00,		/* CE_REG_FR_SQS_G04__A */
-	0x0B, 0x00,		/* CE_REG_FR_SQS_G05__A */
-	0x0B, 0x00,		/* CE_REG_FR_SQS_G06__A */
-	0x0B, 0x00,		/* CE_REG_FR_SQS_G07__A */
-	0x0B, 0x00,		/* CE_REG_FR_SQS_G08__A */
-	0x0B, 0x00,		/* CE_REG_FR_SQS_G09__A */
-	0x0B, 0x00,		/* CE_REG_FR_SQS_G10__A */
-	0x0B, 0x00,		/* CE_REG_FR_SQS_G11__A */
-	0x0B, 0x00,		/* CE_REG_FR_SQS_G12__A */
-
-	0xFF, 0x01,		/* CE_REG_FR_RIO_G00__A */
-	0x90, 0x01,		/* CE_REG_FR_RIO_G01__A */
-	0x0B, 0x01,		/* CE_REG_FR_RIO_G02__A */
-	0xC8, 0x00,		/* CE_REG_FR_RIO_G03__A */
-	0xA0, 0x00,		/* CE_REG_FR_RIO_G04__A */
-	0x85, 0x00,		/* CE_REG_FR_RIO_G05__A */
-	0x72, 0x00,		/* CE_REG_FR_RIO_G06__A */
-	0x64, 0x00,		/* CE_REG_FR_RIO_G07__A */
-	0x59, 0x00,		/* CE_REG_FR_RIO_G08__A */
-	0x50, 0x00,		/* CE_REG_FR_RIO_G09__A */
-	0x49, 0x00,		/* CE_REG_FR_RIO_G10__A */
-
-	0x10, 0x00,		/* CE_REG_FR_MODE__A     */
-	0x78, 0x00,		/* CE_REG_FR_SQS_TRH__A  */
-	0x00, 0x00,		/* CE_REG_FR_RIO_GAIN__A */
-	0x00, 0x02,		/* CE_REG_FR_BYPASS__A   */
-	0x0D, 0x00,		/* CE_REG_FR_PM_SET__A   */
-	0x07, 0x00,		/* CE_REG_FR_ERR_SH__A   */
-	0x04, 0x00,		/* CE_REG_FR_MAN_SH__A   */
-	0x06, 0x00,		/* CE_REG_FR_TAP_SH__A   */
-
-	END_OF_TABLE
-};
-
-u8 DRXD_InitFEA2_1[] = {
-	WRBLOCK(FE_AD_REG_PD__A, 3),
-	0x00, 0x00,		/* FE_AD_REG_PD__A          */
-	0x01, 0x00,		/* FE_AD_REG_INVEXT__A      */
-	0x00, 0x00,		/* FE_AD_REG_CLKNEG__A      */
-
-	WRBLOCK(FE_AG_REG_DCE_AUR_CNT__A, 2),
-	0x10, 0x00,		/* FE_AG_REG_DCE_AUR_CNT__A */
-	0x10, 0x00,		/* FE_AG_REG_DCE_RUR_CNT__A */
-
-	WRBLOCK(FE_AG_REG_ACE_AUR_CNT__A, 2),
-	0x0E, 0x00,		/* FE_AG_REG_ACE_AUR_CNT__A */
-	0x00, 0x00,		/* FE_AG_REG_ACE_RUR_CNT__A */
-
-	WRBLOCK(FE_AG_REG_EGC_FLA_RGN__A, 5),
-	0x04, 0x00,		/* FE_AG_REG_EGC_FLA_RGN__A */
-	0x1F, 0x00,		/* FE_AG_REG_EGC_SLO_RGN__A */
-	0x00, 0x00,		/* FE_AG_REG_EGC_JMP_PSN__A */
-	0x00, 0x00,		/* FE_AG_REG_EGC_FLA_INC__A */
-	0x00, 0x00,		/* FE_AG_REG_EGC_FLA_DEC__A */
-
-	WRBLOCK(FE_AG_REG_GC1_AGC_MAX__A, 2),
-	0xFF, 0x01,		/* FE_AG_REG_GC1_AGC_MAX__A */
-	0x00, 0xFE,		/* FE_AG_REG_GC1_AGC_MIN__A */
-
-	WRBLOCK(FE_AG_REG_IND_WIN__A, 29),
-	0x00, 0x00,		/* FE_AG_REG_IND_WIN__A     */
-	0x05, 0x00,		/* FE_AG_REG_IND_THD_LOL__A */
-	0x0F, 0x00,		/* FE_AG_REG_IND_THD_HIL__A */
-	0x00, 0x00,		/* FE_AG_REG_IND_DEL__A     don't care */
-	0x1E, 0x00,		/* FE_AG_REG_IND_PD1_WRI__A */
-	0x0C, 0x00,		/* FE_AG_REG_PDA_AUR_CNT__A */
-	0x00, 0x00,		/* FE_AG_REG_PDA_RUR_CNT__A */
-	0x00, 0x00,		/* FE_AG_REG_PDA_AVE_DAT__A don't care  */
-	0x00, 0x00,		/* FE_AG_REG_PDC_RUR_CNT__A */
-	0x01, 0x00,		/* FE_AG_REG_PDC_SET_LVL__A */
-	0x02, 0x00,		/* FE_AG_REG_PDC_FLA_RGN__A */
-	0x00, 0x00,		/* FE_AG_REG_PDC_JMP_PSN__A don't care  */
-	0xFF, 0xFF,		/* FE_AG_REG_PDC_FLA_STP__A */
-	0xFF, 0xFF,		/* FE_AG_REG_PDC_SLO_STP__A */
-	0x00, 0x1F,		/* FE_AG_REG_PDC_PD2_WRI__A don't care  */
-	0x00, 0x00,		/* FE_AG_REG_PDC_MAP_DAT__A don't care  */
-	0x02, 0x00,		/* FE_AG_REG_PDC_MAX__A     */
-	0x0C, 0x00,		/* FE_AG_REG_TGA_AUR_CNT__A */
-	0x00, 0x00,		/* FE_AG_REG_TGA_RUR_CNT__A */
-	0x00, 0x00,		/* FE_AG_REG_TGA_AVE_DAT__A don't care  */
-	0x00, 0x00,		/* FE_AG_REG_TGC_RUR_CNT__A */
-	0x22, 0x00,		/* FE_AG_REG_TGC_SET_LVL__A */
-	0x15, 0x00,		/* FE_AG_REG_TGC_FLA_RGN__A */
-	0x00, 0x00,		/* FE_AG_REG_TGC_JMP_PSN__A don't care  */
-	0x01, 0x00,		/* FE_AG_REG_TGC_FLA_STP__A */
-	0x0A, 0x00,		/* FE_AG_REG_TGC_SLO_STP__A */
-	0x00, 0x00,		/* FE_AG_REG_TGC_MAP_DAT__A don't care  */
-	0x10, 0x00,		/* FE_AG_REG_FGA_AUR_CNT__A */
-	0x10, 0x00,		/* FE_AG_REG_FGA_RUR_CNT__A */
-
-	WRBLOCK(FE_AG_REG_BGC_FGC_WRI__A, 2),
-	0x00, 0x00,		/* FE_AG_REG_BGC_FGC_WRI__A */
-	0x00, 0x00,		/* FE_AG_REG_BGC_CGC_WRI__A */
-
-	WRBLOCK(FE_FD_REG_SCL__A, 3),
-	0x05, 0x00,		/* FE_FD_REG_SCL__A         */
-	0x03, 0x00,		/* FE_FD_REG_MAX_LEV__A     */
-	0x05, 0x00,		/* FE_FD_REG_NR__A          */
-
-	WRBLOCK(FE_CF_REG_SCL__A, 5),
-	0x16, 0x00,		/* FE_CF_REG_SCL__A         */
-	0x04, 0x00,		/* FE_CF_REG_MAX_LEV__A     */
-	0x06, 0x00,		/* FE_CF_REG_NR__A          */
-	0x00, 0x00,		/* FE_CF_REG_IMP_VAL__A     */
-	0x01, 0x00,		/* FE_CF_REG_MEAS_VAL__A    */
-
-	WRBLOCK(FE_CU_REG_FRM_CNT_RST__A, 2),
-	0x00, 0x08,		/* FE_CU_REG_FRM_CNT_RST__A */
-	0x00, 0x00,		/* FE_CU_REG_FRM_CNT_STR__A */
-
-	END_OF_TABLE
-};
-
-   /* with PGA */
-/*   WR16COND( DRXD_WITH_PGA, FE_AG_REG_AG_PGA_MODE__A   , 0x0004), */
-   /* without PGA */
-/*   WR16COND( DRXD_WITHOUT_PGA, FE_AG_REG_AG_PGA_MODE__A   , 0x0001), */
-/*   WR16(FE_AG_REG_AG_AGC_SIO__A,  (extAttr -> FeAgRegAgAgcSio), 0x0000 );*/
-/*   WR16(FE_AG_REG_AG_PWD__A        ,(extAttr -> FeAgRegAgPwd), 0x0000 );*/
-
-u8 DRXD_InitFEA2_2[] = {
-	WR16(FE_AG_REG_CDR_RUR_CNT__A, 0x0010),
-	WR16(FE_AG_REG_FGM_WRI__A, 48),
-	/* Activate measurement, activate scale */
-	WR16(FE_FD_REG_MEAS_VAL__A, 0x0001),
-
-	WR16(FE_CU_REG_COMM_EXEC__A, 0x0001),
-	WR16(FE_CF_REG_COMM_EXEC__A, 0x0001),
-	WR16(FE_IF_REG_COMM_EXEC__A, 0x0001),
-	WR16(FE_FD_REG_COMM_EXEC__A, 0x0001),
-	WR16(FE_FS_REG_COMM_EXEC__A, 0x0001),
-	WR16(FE_AD_REG_COMM_EXEC__A, 0x0001),
-	WR16(FE_AG_REG_COMM_EXEC__A, 0x0001),
-	WR16(FE_AG_REG_AG_MODE_LOP__A, 0x895E),
-
-	END_OF_TABLE
-};
-
-u8 DRXD_InitFEB1_1[] = {
-	WR16(B_FE_AD_REG_PD__A, 0x0000),
-	WR16(B_FE_AD_REG_CLKNEG__A, 0x0000),
-	WR16(B_FE_AG_REG_BGC_FGC_WRI__A, 0x0000),
-	WR16(B_FE_AG_REG_BGC_CGC_WRI__A, 0x0000),
-	WR16(B_FE_AG_REG_AG_MODE_LOP__A, 0x000a),
-	WR16(B_FE_AG_REG_IND_PD1_WRI__A, 35),
-	WR16(B_FE_AG_REG_IND_WIN__A, 0),
-	WR16(B_FE_AG_REG_IND_THD_LOL__A, 8),
-	WR16(B_FE_AG_REG_IND_THD_HIL__A, 8),
-	WR16(B_FE_CF_REG_IMP_VAL__A, 1),
-	WR16(B_FE_AG_REG_EGC_FLA_RGN__A, 7),
-	END_OF_TABLE
-};
-
-	/* with PGA */
-/*      WR16(B_FE_AG_REG_AG_PGA_MODE__A   , 0x0000, 0x0000); */
-       /* without PGA */
-/*      WR16(B_FE_AG_REG_AG_PGA_MODE__A   ,
-	     B_FE_AG_REG_AG_PGA_MODE_PFN_PCN_AFY_REN, 0x0000);*/
-									     /*   WR16(B_FE_AG_REG_AG_AGC_SIO__A,(extAttr -> FeAgRegAgAgcSio), 0x0000 );*//*added HS 23-05-2005 */
-/*   WR16(B_FE_AG_REG_AG_PWD__A    ,(extAttr -> FeAgRegAgPwd), 0x0000 );*/
-
-u8 DRXD_InitFEB1_2[] = {
-	WR16(B_FE_COMM_EXEC__A, 0x0001),
-
-	/* RF-AGC setup */
-	WR16(B_FE_AG_REG_PDA_AUR_CNT__A, 0x0C),
-	WR16(B_FE_AG_REG_PDC_SET_LVL__A, 0x01),
-	WR16(B_FE_AG_REG_PDC_FLA_RGN__A, 0x02),
-	WR16(B_FE_AG_REG_PDC_FLA_STP__A, 0xFFFF),
-	WR16(B_FE_AG_REG_PDC_SLO_STP__A, 0xFFFF),
-	WR16(B_FE_AG_REG_PDC_MAX__A, 0x02),
-	WR16(B_FE_AG_REG_TGA_AUR_CNT__A, 0x0C),
-	WR16(B_FE_AG_REG_TGC_SET_LVL__A, 0x22),
-	WR16(B_FE_AG_REG_TGC_FLA_RGN__A, 0x15),
-	WR16(B_FE_AG_REG_TGC_FLA_STP__A, 0x01),
-	WR16(B_FE_AG_REG_TGC_SLO_STP__A, 0x0A),
-
-	WR16(B_FE_CU_REG_DIV_NFC_CLP__A, 0),
-	WR16(B_FE_CU_REG_CTR_NFC_OCR__A, 25000),
-	WR16(B_FE_CU_REG_CTR_NFC_ICR__A, 1),
-	END_OF_TABLE
-};
-
-u8 DRXD_InitCPA2[] = {
-	WRBLOCK(CP_REG_BR_SPL_OFFSET__A, 2),
-	0x07, 0x00,		/* CP_REG_BR_SPL_OFFSET__A  */
-	0x0A, 0x00,		/* CP_REG_BR_STR_DEL__A     */
-
-	WRBLOCK(CP_REG_RT_ANG_INC0__A, 4),
-	0x00, 0x00,		/* CP_REG_RT_ANG_INC0__A    */
-	0x00, 0x00,		/* CP_REG_RT_ANG_INC1__A    */
-	0x03, 0x00,		/* CP_REG_RT_DETECT_ENA__A  */
-	0x03, 0x00,		/* CP_REG_RT_DETECT_TRH__A  */
-
-	WRBLOCK(CP_REG_AC_NEXP_OFFS__A, 5),
-	0x32, 0x00,		/* CP_REG_AC_NEXP_OFFS__A   */
-	0x62, 0x00,		/* CP_REG_AC_AVER_POW__A    */
-	0x82, 0x00,		/* CP_REG_AC_MAX_POW__A     */
-	0x26, 0x00,		/* CP_REG_AC_WEIGHT_MAN__A  */
-	0x0F, 0x00,		/* CP_REG_AC_WEIGHT_EXP__A  */
-
-	WRBLOCK(CP_REG_AC_AMP_MODE__A, 2),
-	0x02, 0x00,		/* CP_REG_AC_AMP_MODE__A    */
-	0x01, 0x00,		/* CP_REG_AC_AMP_FIX__A     */
-
-	WR16(CP_REG_INTERVAL__A, 0x0005),
-	WR16(CP_REG_RT_EXP_MARG__A, 0x0004),
-	WR16(CP_REG_AC_ANG_MODE__A, 0x0003),
-
-	WR16(CP_REG_COMM_EXEC__A, 0x0001),
-	END_OF_TABLE
-};
-
-u8 DRXD_InitCPB1[] = {
-	WR16(B_CP_REG_BR_SPL_OFFSET__A, 0x0008),
-	WR16(B_CP_COMM_EXEC__A, 0x0001),
-	END_OF_TABLE
-};
-
-u8 DRXD_InitCEA2[] = {
-	WRBLOCK(CE_REG_AVG_POW__A, 4),
-	0x62, 0x00,		/* CE_REG_AVG_POW__A        */
-	0x78, 0x00,		/* CE_REG_MAX_POW__A        */
-	0x62, 0x00,		/* CE_REG_ATT__A            */
-	0x17, 0x00,		/* CE_REG_NRED__A           */
-
-	WRBLOCK(CE_REG_NE_ERR_SELECT__A, 2),
-	0x07, 0x00,		/* CE_REG_NE_ERR_SELECT__A  */
-	0xEB, 0xFF,		/* CE_REG_NE_TD_CAL__A      */
-
-	WRBLOCK(CE_REG_NE_MIXAVG__A, 2),
-	0x06, 0x00,		/* CE_REG_NE_MIXAVG__A      */
-	0x00, 0x00,		/* CE_REG_NE_NUPD_OFS__A    */
-
-	WRBLOCK(CE_REG_PE_NEXP_OFFS__A, 2),
-	0x00, 0x00,		/* CE_REG_PE_NEXP_OFFS__A   */
-	0x00, 0x00,		/* CE_REG_PE_TIMESHIFT__A   */
-
-	WRBLOCK(CE_REG_TP_A0_TAP_NEW__A, 3),
-	0x00, 0x01,		/* CE_REG_TP_A0_TAP_NEW__A       */
-	0x01, 0x00,		/* CE_REG_TP_A0_TAP_NEW_VALID__A */
-	0x0E, 0x00,		/* CE_REG_TP_A0_MU_LMS_STEP__A   */
-
-	WRBLOCK(CE_REG_TP_A1_TAP_NEW__A, 3),
-	0x00, 0x00,		/* CE_REG_TP_A1_TAP_NEW__A        */
-	0x01, 0x00,		/* CE_REG_TP_A1_TAP_NEW_VALID__A  */
-	0x0A, 0x00,		/* CE_REG_TP_A1_MU_LMS_STEP__A    */
-
-	WRBLOCK(CE_REG_FI_SHT_INCR__A, 2),
-	0x12, 0x00,		/* CE_REG_FI_SHT_INCR__A          */
-	0x0C, 0x00,		/* CE_REG_FI_EXP_NORM__A          */
-
-	WRBLOCK(CE_REG_IR_INPUTSEL__A, 3),
-	0x00, 0x00,		/* CE_REG_IR_INPUTSEL__A          */
-	0x00, 0x00,		/* CE_REG_IR_STARTPOS__A          */
-	0xFF, 0x00,		/* CE_REG_IR_NEXP_THRES__A        */
-
-	WR16(CE_REG_TI_NEXP_OFFS__A, 0x0000),
-
-	END_OF_TABLE
-};
-
-u8 DRXD_InitCEB1[] = {
-	WR16(B_CE_REG_TI_PHN_ENABLE__A, 0x0001),
-	WR16(B_CE_REG_FR_PM_SET__A, 0x000D),
-
-	END_OF_TABLE
-};
-
-u8 DRXD_InitEQA2[] = {
-	WRBLOCK(EQ_REG_OT_QNT_THRES0__A, 4),
-	0x1E, 0x00,		/* EQ_REG_OT_QNT_THRES0__A        */
-	0x1F, 0x00,		/* EQ_REG_OT_QNT_THRES1__A        */
-	0x06, 0x00,		/* EQ_REG_OT_CSI_STEP__A          */
-	0x02, 0x00,		/* EQ_REG_OT_CSI_OFFSET__A        */
-
-	WR16(EQ_REG_TD_REQ_SMB_CNT__A, 0x0200),
-	WR16(EQ_REG_IS_CLIP_EXP__A, 0x001F),
-	WR16(EQ_REG_SN_OFFSET__A, (u16) (-7)),
-	WR16(EQ_REG_RC_SEL_CAR__A, 0x0002),
-	WR16(EQ_REG_COMM_EXEC__A, 0x0001),
-	END_OF_TABLE
-};
-
-u8 DRXD_InitEQB1[] = {
-	WR16(B_EQ_REG_COMM_EXEC__A, 0x0001),
-	END_OF_TABLE
-};
-
-u8 DRXD_ResetECRAM[] = {
-	/* Reset packet sync bytes in EC_VD ram */
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (0 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (1 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (2 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (3 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (4 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (5 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (6 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (7 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (8 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (9 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (10 * 17), 0x0000),
-
-	/* Reset packet sync bytes in EC_RS ram */
-	WR16(EC_RS_EC_RAM__A, 0x0000),
-	WR16(EC_RS_EC_RAM__A + 204, 0x0000),
-	END_OF_TABLE
-};
-
-u8 DRXD_InitECA2[] = {
-	WRBLOCK(EC_SB_REG_CSI_HI__A, 6),
-	0x1F, 0x00,		/* EC_SB_REG_CSI_HI__A            */
-	0x1E, 0x00,		/* EC_SB_REG_CSI_LO__A            */
-	0x01, 0x00,		/* EC_SB_REG_SMB_TGL__A           */
-	0x7F, 0x00,		/* EC_SB_REG_SNR_HI__A            */
-	0x7F, 0x00,		/* EC_SB_REG_SNR_MID__A           */
-	0x7F, 0x00,		/* EC_SB_REG_SNR_LO__A            */
-
-	WRBLOCK(EC_RS_REG_REQ_PCK_CNT__A, 2),
-	0x00, 0x10,		/* EC_RS_REG_REQ_PCK_CNT__A       */
-	DATA16(EC_RS_REG_VAL_PCK),	/* EC_RS_REG_VAL__A               */
-
-	WRBLOCK(EC_OC_REG_TMD_TOP_MODE__A, 5),
-	0x03, 0x00,		/* EC_OC_REG_TMD_TOP_MODE__A      */
-	0xF4, 0x01,		/* EC_OC_REG_TMD_TOP_CNT__A       */
-	0xC0, 0x03,		/* EC_OC_REG_TMD_HIL_MAR__A       */
-	0x40, 0x00,		/* EC_OC_REG_TMD_LOL_MAR__A       */
-	0x03, 0x00,		/* EC_OC_REG_TMD_CUR_CNT__A       */
-
-	WRBLOCK(EC_OC_REG_AVR_ASH_CNT__A, 2),
-	0x06, 0x00,		/* EC_OC_REG_AVR_ASH_CNT__A       */
-	0x02, 0x00,		/* EC_OC_REG_AVR_BSH_CNT__A       */
-
-	WRBLOCK(EC_OC_REG_RCN_MODE__A, 7),
-	0x07, 0x00,		/* EC_OC_REG_RCN_MODE__A          */
-	0x00, 0x00,		/* EC_OC_REG_RCN_CRA_LOP__A       */
-	0xc0, 0x00,		/* EC_OC_REG_RCN_CRA_HIP__A       */
-	0x00, 0x10,		/* EC_OC_REG_RCN_CST_LOP__A       */
-	0x00, 0x00,		/* EC_OC_REG_RCN_CST_HIP__A       */
-	0xFF, 0x01,		/* EC_OC_REG_RCN_SET_LVL__A       */
-	0x0D, 0x00,		/* EC_OC_REG_RCN_GAI_LVL__A       */
-
-	WRBLOCK(EC_OC_REG_RCN_CLP_LOP__A, 2),
-	0x00, 0x00,		/* EC_OC_REG_RCN_CLP_LOP__A       */
-	0xC0, 0x00,		/* EC_OC_REG_RCN_CLP_HIP__A       */
-
-	WR16(EC_SB_REG_CSI_OFS__A, 0x0001),
-	WR16(EC_VD_REG_FORCE__A, 0x0002),
-	WR16(EC_VD_REG_REQ_SMB_CNT__A, 0x0001),
-	WR16(EC_VD_REG_RLK_ENA__A, 0x0001),
-	WR16(EC_OD_REG_SYNC__A, 0x0664),
-	WR16(EC_OC_REG_OC_MON_SIO__A, 0x0000),
-	WR16(EC_OC_REG_SNC_ISC_LVL__A, 0x0D0C),
-	/* Output zero on monitorbus pads, power saving */
-	WR16(EC_OC_REG_OCR_MON_UOS__A,
-	     (EC_OC_REG_OCR_MON_UOS_DAT_0_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_DAT_1_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_DAT_2_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_DAT_3_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_DAT_4_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_DAT_5_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_DAT_6_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_DAT_7_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_DAT_8_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_DAT_9_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_VAL_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_CLK_ENABLE)),
-	WR16(EC_OC_REG_OCR_MON_WRI__A,
-	     EC_OC_REG_OCR_MON_WRI_INIT),
-
-/*   CHK_ERROR(ResetECRAM(demod)); */
-	/* Reset packet sync bytes in EC_VD ram */
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (0 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (1 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (2 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (3 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (4 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (5 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (6 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (7 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (8 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (9 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (10 * 17), 0x0000),
-
-	/* Reset packet sync bytes in EC_RS ram */
-	WR16(EC_RS_EC_RAM__A, 0x0000),
-	WR16(EC_RS_EC_RAM__A + 204, 0x0000),
-
-	WR16(EC_SB_REG_COMM_EXEC__A, 0x0001),
-	WR16(EC_VD_REG_COMM_EXEC__A, 0x0001),
-	WR16(EC_OD_REG_COMM_EXEC__A, 0x0001),
-	WR16(EC_RS_REG_COMM_EXEC__A, 0x0001),
-	END_OF_TABLE
-};
-
-u8 DRXD_InitECB1[] = {
-	WR16(B_EC_SB_REG_CSI_OFS0__A, 0x0001),
-	WR16(B_EC_SB_REG_CSI_OFS1__A, 0x0001),
-	WR16(B_EC_SB_REG_CSI_OFS2__A, 0x0001),
-	WR16(B_EC_SB_REG_CSI_LO__A, 0x000c),
-	WR16(B_EC_SB_REG_CSI_HI__A, 0x0018),
-	WR16(B_EC_SB_REG_SNR_HI__A, 0x007f),
-	WR16(B_EC_SB_REG_SNR_MID__A, 0x007f),
-	WR16(B_EC_SB_REG_SNR_LO__A, 0x007f),
-
-	WR16(B_EC_OC_REG_DTO_CLKMODE__A, 0x0002),
-	WR16(B_EC_OC_REG_DTO_PER__A, 0x0006),
-	WR16(B_EC_OC_REG_DTO_BUR__A, 0x0001),
-	WR16(B_EC_OC_REG_RCR_CLKMODE__A, 0x0000),
-	WR16(B_EC_OC_REG_RCN_GAI_LVL__A, 0x000D),
-	WR16(B_EC_OC_REG_OC_MPG_SIO__A, 0x0000),
-
-	/* Needed because shadow registers do not have correct default value */
-	WR16(B_EC_OC_REG_RCN_CST_LOP__A, 0x1000),
-	WR16(B_EC_OC_REG_RCN_CST_HIP__A, 0x0000),
-	WR16(B_EC_OC_REG_RCN_CRA_LOP__A, 0x0000),
-	WR16(B_EC_OC_REG_RCN_CRA_HIP__A, 0x00C0),
-	WR16(B_EC_OC_REG_RCN_CLP_LOP__A, 0x0000),
-	WR16(B_EC_OC_REG_RCN_CLP_HIP__A, 0x00C0),
-	WR16(B_EC_OC_REG_DTO_INC_LOP__A, 0x0000),
-	WR16(B_EC_OC_REG_DTO_INC_HIP__A, 0x00C0),
-
-	WR16(B_EC_OD_REG_SYNC__A, 0x0664),
-	WR16(B_EC_RS_REG_REQ_PCK_CNT__A, 0x1000),
-
-/*   CHK_ERROR(ResetECRAM(demod)); */
-	/* Reset packet sync bytes in EC_VD ram */
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (0 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (1 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (2 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (3 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (4 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (5 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (6 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (7 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (8 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (9 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (10 * 17), 0x0000),
-
-	/* Reset packet sync bytes in EC_RS ram */
-	WR16(EC_RS_EC_RAM__A, 0x0000),
-	WR16(EC_RS_EC_RAM__A + 204, 0x0000),
-
-	WR16(B_EC_SB_REG_COMM_EXEC__A, 0x0001),
-	WR16(B_EC_VD_REG_COMM_EXEC__A, 0x0001),
-	WR16(B_EC_OD_REG_COMM_EXEC__A, 0x0001),
-	WR16(B_EC_RS_REG_COMM_EXEC__A, 0x0001),
-	END_OF_TABLE
-};
-
-u8 DRXD_ResetECA2[] = {
-
-	WR16(EC_OC_REG_COMM_EXEC__A, 0x0000),
-	WR16(EC_OD_REG_COMM_EXEC__A, 0x0000),
-
-	WRBLOCK(EC_OC_REG_TMD_TOP_MODE__A, 5),
-	0x03, 0x00,		/* EC_OC_REG_TMD_TOP_MODE__A      */
-	0xF4, 0x01,		/* EC_OC_REG_TMD_TOP_CNT__A       */
-	0xC0, 0x03,		/* EC_OC_REG_TMD_HIL_MAR__A       */
-	0x40, 0x00,		/* EC_OC_REG_TMD_LOL_MAR__A       */
-	0x03, 0x00,		/* EC_OC_REG_TMD_CUR_CNT__A       */
-
-	WRBLOCK(EC_OC_REG_AVR_ASH_CNT__A, 2),
-	0x06, 0x00,		/* EC_OC_REG_AVR_ASH_CNT__A       */
-	0x02, 0x00,		/* EC_OC_REG_AVR_BSH_CNT__A       */
-
-	WRBLOCK(EC_OC_REG_RCN_MODE__A, 7),
-	0x07, 0x00,		/* EC_OC_REG_RCN_MODE__A          */
-	0x00, 0x00,		/* EC_OC_REG_RCN_CRA_LOP__A       */
-	0xc0, 0x00,		/* EC_OC_REG_RCN_CRA_HIP__A       */
-	0x00, 0x10,		/* EC_OC_REG_RCN_CST_LOP__A       */
-	0x00, 0x00,		/* EC_OC_REG_RCN_CST_HIP__A       */
-	0xFF, 0x01,		/* EC_OC_REG_RCN_SET_LVL__A       */
-	0x0D, 0x00,		/* EC_OC_REG_RCN_GAI_LVL__A       */
-
-	WRBLOCK(EC_OC_REG_RCN_CLP_LOP__A, 2),
-	0x00, 0x00,		/* EC_OC_REG_RCN_CLP_LOP__A       */
-	0xC0, 0x00,		/* EC_OC_REG_RCN_CLP_HIP__A       */
-
-	WR16(EC_OD_REG_SYNC__A, 0x0664),
-	WR16(EC_OC_REG_OC_MON_SIO__A, 0x0000),
-	WR16(EC_OC_REG_SNC_ISC_LVL__A, 0x0D0C),
-	/* Output zero on monitorbus pads, power saving */
-	WR16(EC_OC_REG_OCR_MON_UOS__A,
-	     (EC_OC_REG_OCR_MON_UOS_DAT_0_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_DAT_1_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_DAT_2_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_DAT_3_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_DAT_4_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_DAT_5_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_DAT_6_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_DAT_7_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_DAT_8_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_DAT_9_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_VAL_ENABLE |
-	      EC_OC_REG_OCR_MON_UOS_CLK_ENABLE)),
-	WR16(EC_OC_REG_OCR_MON_WRI__A,
-	     EC_OC_REG_OCR_MON_WRI_INIT),
-
-/*   CHK_ERROR(ResetECRAM(demod)); */
-	/* Reset packet sync bytes in EC_VD ram */
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (0 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (1 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (2 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (3 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (4 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (5 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (6 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (7 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (8 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (9 * 17), 0x0000),
-	WR16(EC_OD_DEINT_RAM__A + 0x3b7 + (10 * 17), 0x0000),
-
-	/* Reset packet sync bytes in EC_RS ram */
-	WR16(EC_RS_EC_RAM__A, 0x0000),
-	WR16(EC_RS_EC_RAM__A + 204, 0x0000),
-
-	WR16(EC_OD_REG_COMM_EXEC__A, 0x0001),
-	END_OF_TABLE
-};
-
-u8 DRXD_InitSC[] = {
-	WR16(SC_COMM_EXEC__A, 0),
-	WR16(SC_COMM_STATE__A, 0),
-
-#ifdef COMPILE_FOR_QT
-	WR16(SC_RA_RAM_BE_OPT_DELAY__A, 0x100),
-#endif
-
-	/* SC is not started, this is done in SetChannels() */
-	END_OF_TABLE
-};
-
-/* Diversity settings */
-
-u8 DRXD_InitDiversityFront[] = {
-	/* Start demod ********* RF in , diversity out **************************** */
-	WR16(B_SC_RA_RAM_CONFIG__A, B_SC_RA_RAM_CONFIG_FR_ENABLE__M |
-	     B_SC_RA_RAM_CONFIG_FREQSCAN__M),
-
-	WR16(B_SC_RA_RAM_LC_ABS_2K__A, 0x7),
-	WR16(B_SC_RA_RAM_LC_ABS_8K__A, 0x7),
-	WR16(B_SC_RA_RAM_IR_COARSE_8K_LENGTH__A, IRLEN_COARSE_8K),
-	WR16(B_SC_RA_RAM_IR_COARSE_8K_FREQINC__A, 1 << (11 - IRLEN_COARSE_8K)),
-	WR16(B_SC_RA_RAM_IR_COARSE_8K_KAISINC__A, 1 << (17 - IRLEN_COARSE_8K)),
-	WR16(B_SC_RA_RAM_IR_FINE_8K_LENGTH__A, IRLEN_FINE_8K),
-	WR16(B_SC_RA_RAM_IR_FINE_8K_FREQINC__A, 1 << (11 - IRLEN_FINE_8K)),
-	WR16(B_SC_RA_RAM_IR_FINE_8K_KAISINC__A, 1 << (17 - IRLEN_FINE_8K)),
-
-	WR16(B_SC_RA_RAM_IR_COARSE_2K_LENGTH__A, IRLEN_COARSE_2K),
-	WR16(B_SC_RA_RAM_IR_COARSE_2K_FREQINC__A, 1 << (11 - IRLEN_COARSE_2K)),
-	WR16(B_SC_RA_RAM_IR_COARSE_2K_KAISINC__A, 1 << (17 - IRLEN_COARSE_2K)),
-	WR16(B_SC_RA_RAM_IR_FINE_2K_LENGTH__A, IRLEN_FINE_2K),
-	WR16(B_SC_RA_RAM_IR_FINE_2K_FREQINC__A, 1 << (11 - IRLEN_FINE_2K)),
-	WR16(B_SC_RA_RAM_IR_FINE_2K_KAISINC__A, 1 << (17 - IRLEN_FINE_2K)),
-
-	WR16(B_LC_RA_RAM_FILTER_CRMM_A__A, 7),
-	WR16(B_LC_RA_RAM_FILTER_CRMM_B__A, 4),
-	WR16(B_LC_RA_RAM_FILTER_SRMM_A__A, 7),
-	WR16(B_LC_RA_RAM_FILTER_SRMM_B__A, 4),
-	WR16(B_LC_RA_RAM_FILTER_SYM_SET__A, 500),
-
-	WR16(B_CC_REG_DIVERSITY__A, 0x0001),
-	WR16(B_EC_OC_REG_OC_MODE_HIP__A, 0x0010),
-	WR16(B_EQ_REG_RC_SEL_CAR__A, B_EQ_REG_RC_SEL_CAR_PASS_B_CE |
-	     B_EQ_REG_RC_SEL_CAR_LOCAL_B_CE | B_EQ_REG_RC_SEL_CAR_MEAS_B_CE),
-
-	/*    0x2a ), *//* CE to PASS mux */
-
-	END_OF_TABLE
-};
-
-u8 DRXD_InitDiversityEnd[] = {
-	/* End demod *********** combining RF in and diversity in, MPEG TS out **** */
-	/* disable near/far; switch on timing slave mode */
-	WR16(B_SC_RA_RAM_CONFIG__A, B_SC_RA_RAM_CONFIG_FR_ENABLE__M |
-	     B_SC_RA_RAM_CONFIG_FREQSCAN__M |
-	     B_SC_RA_RAM_CONFIG_DIV_ECHO_ENABLE__M |
-	     B_SC_RA_RAM_CONFIG_SLAVE__M |
-	     B_SC_RA_RAM_CONFIG_DIV_BLANK_ENABLE__M
-/* MV from CtrlDiversity */
-	    ),
-#ifdef DRXDDIV_SRMM_SLAVING
-	WR16(SC_RA_RAM_LC_ABS_2K__A, 0x3c7),
-	WR16(SC_RA_RAM_LC_ABS_8K__A, 0x3c7),
-#else
-	WR16(SC_RA_RAM_LC_ABS_2K__A, 0x7),
-	WR16(SC_RA_RAM_LC_ABS_8K__A, 0x7),
-#endif
-
-	WR16(B_SC_RA_RAM_IR_COARSE_8K_LENGTH__A, IRLEN_COARSE_8K),
-	WR16(B_SC_RA_RAM_IR_COARSE_8K_FREQINC__A, 1 << (11 - IRLEN_COARSE_8K)),
-	WR16(B_SC_RA_RAM_IR_COARSE_8K_KAISINC__A, 1 << (17 - IRLEN_COARSE_8K)),
-	WR16(B_SC_RA_RAM_IR_FINE_8K_LENGTH__A, IRLEN_FINE_8K),
-	WR16(B_SC_RA_RAM_IR_FINE_8K_FREQINC__A, 1 << (11 - IRLEN_FINE_8K)),
-	WR16(B_SC_RA_RAM_IR_FINE_8K_KAISINC__A, 1 << (17 - IRLEN_FINE_8K)),
-
-	WR16(B_SC_RA_RAM_IR_COARSE_2K_LENGTH__A, IRLEN_COARSE_2K),
-	WR16(B_SC_RA_RAM_IR_COARSE_2K_FREQINC__A, 1 << (11 - IRLEN_COARSE_2K)),
-	WR16(B_SC_RA_RAM_IR_COARSE_2K_KAISINC__A, 1 << (17 - IRLEN_COARSE_2K)),
-	WR16(B_SC_RA_RAM_IR_FINE_2K_LENGTH__A, IRLEN_FINE_2K),
-	WR16(B_SC_RA_RAM_IR_FINE_2K_FREQINC__A, 1 << (11 - IRLEN_FINE_2K)),
-	WR16(B_SC_RA_RAM_IR_FINE_2K_KAISINC__A, 1 << (17 - IRLEN_FINE_2K)),
-
-	WR16(B_LC_RA_RAM_FILTER_CRMM_A__A, 7),
-	WR16(B_LC_RA_RAM_FILTER_CRMM_B__A, 4),
-	WR16(B_LC_RA_RAM_FILTER_SRMM_A__A, 7),
-	WR16(B_LC_RA_RAM_FILTER_SRMM_B__A, 4),
-	WR16(B_LC_RA_RAM_FILTER_SYM_SET__A, 500),
-
-	WR16(B_CC_REG_DIVERSITY__A, 0x0001),
-	END_OF_TABLE
-};
-
-u8 DRXD_DisableDiversity[] = {
-	WR16(B_SC_RA_RAM_LC_ABS_2K__A, B_SC_RA_RAM_LC_ABS_2K__PRE),
-	WR16(B_SC_RA_RAM_LC_ABS_8K__A, B_SC_RA_RAM_LC_ABS_8K__PRE),
-	WR16(B_SC_RA_RAM_IR_COARSE_8K_LENGTH__A,
-	     B_SC_RA_RAM_IR_COARSE_8K_LENGTH__PRE),
-	WR16(B_SC_RA_RAM_IR_COARSE_8K_FREQINC__A,
-	     B_SC_RA_RAM_IR_COARSE_8K_FREQINC__PRE),
-	WR16(B_SC_RA_RAM_IR_COARSE_8K_KAISINC__A,
-	     B_SC_RA_RAM_IR_COARSE_8K_KAISINC__PRE),
-	WR16(B_SC_RA_RAM_IR_FINE_8K_LENGTH__A,
-	     B_SC_RA_RAM_IR_FINE_8K_LENGTH__PRE),
-	WR16(B_SC_RA_RAM_IR_FINE_8K_FREQINC__A,
-	     B_SC_RA_RAM_IR_FINE_8K_FREQINC__PRE),
-	WR16(B_SC_RA_RAM_IR_FINE_8K_KAISINC__A,
-	     B_SC_RA_RAM_IR_FINE_8K_KAISINC__PRE),
-
-	WR16(B_SC_RA_RAM_IR_COARSE_2K_LENGTH__A,
-	     B_SC_RA_RAM_IR_COARSE_2K_LENGTH__PRE),
-	WR16(B_SC_RA_RAM_IR_COARSE_2K_FREQINC__A,
-	     B_SC_RA_RAM_IR_COARSE_2K_FREQINC__PRE),
-	WR16(B_SC_RA_RAM_IR_COARSE_2K_KAISINC__A,
-	     B_SC_RA_RAM_IR_COARSE_2K_KAISINC__PRE),
-	WR16(B_SC_RA_RAM_IR_FINE_2K_LENGTH__A,
-	     B_SC_RA_RAM_IR_FINE_2K_LENGTH__PRE),
-	WR16(B_SC_RA_RAM_IR_FINE_2K_FREQINC__A,
-	     B_SC_RA_RAM_IR_FINE_2K_FREQINC__PRE),
-	WR16(B_SC_RA_RAM_IR_FINE_2K_KAISINC__A,
-	     B_SC_RA_RAM_IR_FINE_2K_KAISINC__PRE),
-
-	WR16(B_LC_RA_RAM_FILTER_CRMM_A__A, B_LC_RA_RAM_FILTER_CRMM_A__PRE),
-	WR16(B_LC_RA_RAM_FILTER_CRMM_B__A, B_LC_RA_RAM_FILTER_CRMM_B__PRE),
-	WR16(B_LC_RA_RAM_FILTER_SRMM_A__A, B_LC_RA_RAM_FILTER_SRMM_A__PRE),
-	WR16(B_LC_RA_RAM_FILTER_SRMM_B__A, B_LC_RA_RAM_FILTER_SRMM_B__PRE),
-	WR16(B_LC_RA_RAM_FILTER_SYM_SET__A, B_LC_RA_RAM_FILTER_SYM_SET__PRE),
-
-	WR16(B_CC_REG_DIVERSITY__A, 0x0000),
-	WR16(B_EQ_REG_RC_SEL_CAR__A, B_EQ_REG_RC_SEL_CAR_INIT),	/* combining disabled */
-
-	END_OF_TABLE
-};
-
-u8 DRXD_StartDiversityFront[] = {
-	/* Start demod, RF in and diversity out, no combining */
-	WR16(B_FE_CF_REG_IMP_VAL__A, 0x0),
-	WR16(B_FE_AD_REG_FDB_IN__A, 0x0),
-	WR16(B_FE_AD_REG_INVEXT__A, 0x0),
-	WR16(B_EQ_REG_COMM_MB__A, 0x12),	/* EQ to MB out */
-	WR16(B_EQ_REG_RC_SEL_CAR__A, B_EQ_REG_RC_SEL_CAR_PASS_B_CE |	/* CE to PASS mux */
-	     B_EQ_REG_RC_SEL_CAR_LOCAL_B_CE | B_EQ_REG_RC_SEL_CAR_MEAS_B_CE),
-
-	WR16(SC_RA_RAM_ECHO_SHIFT_LIM__A, 2),
-
-	END_OF_TABLE
-};
-
-u8 DRXD_StartDiversityEnd[] = {
-	/* End demod, combining RF in and diversity in, MPEG TS out */
-	WR16(B_FE_CF_REG_IMP_VAL__A, 0x0),	/* disable impulse noise cruncher */
-	WR16(B_FE_AD_REG_INVEXT__A, 0x0),	/* clock inversion (for sohard board) */
-	WR16(B_CP_REG_BR_STR_DEL__A, 10),	/* apperently no mb delay matching is best */
-
-	WR16(B_EQ_REG_RC_SEL_CAR__A, B_EQ_REG_RC_SEL_CAR_DIV_ON |	/* org = 0x81 combining enabled */
-	     B_EQ_REG_RC_SEL_CAR_MEAS_A_CC |
-	     B_EQ_REG_RC_SEL_CAR_PASS_A_CC | B_EQ_REG_RC_SEL_CAR_LOCAL_A_CC),
-
-	END_OF_TABLE
-};
-
-u8 DRXD_DiversityDelay8MHZ[] = {
-	WR16(B_SC_RA_RAM_DIVERSITY_DELAY_2K_32__A, 1150 - 50),
-	WR16(B_SC_RA_RAM_DIVERSITY_DELAY_2K_16__A, 1100 - 50),
-	WR16(B_SC_RA_RAM_DIVERSITY_DELAY_2K_8__A, 1000 - 50),
-	WR16(B_SC_RA_RAM_DIVERSITY_DELAY_2K_4__A, 800 - 50),
-	WR16(B_SC_RA_RAM_DIVERSITY_DELAY_8K_32__A, 5420 - 50),
-	WR16(B_SC_RA_RAM_DIVERSITY_DELAY_8K_16__A, 5200 - 50),
-	WR16(B_SC_RA_RAM_DIVERSITY_DELAY_8K_8__A, 4800 - 50),
-	WR16(B_SC_RA_RAM_DIVERSITY_DELAY_8K_4__A, 4000 - 50),
-	END_OF_TABLE
-};
-
-u8 DRXD_DiversityDelay6MHZ[] =	/* also used ok for 7 MHz */
-{
-	WR16(B_SC_RA_RAM_DIVERSITY_DELAY_2K_32__A, 1100 - 50),
-	WR16(B_SC_RA_RAM_DIVERSITY_DELAY_2K_16__A, 1000 - 50),
-	WR16(B_SC_RA_RAM_DIVERSITY_DELAY_2K_8__A, 900 - 50),
-	WR16(B_SC_RA_RAM_DIVERSITY_DELAY_2K_4__A, 600 - 50),
-	WR16(B_SC_RA_RAM_DIVERSITY_DELAY_8K_32__A, 5300 - 50),
-	WR16(B_SC_RA_RAM_DIVERSITY_DELAY_8K_16__A, 5000 - 50),
-	WR16(B_SC_RA_RAM_DIVERSITY_DELAY_8K_8__A, 4500 - 50),
-	WR16(B_SC_RA_RAM_DIVERSITY_DELAY_8K_4__A, 3500 - 50),
-	END_OF_TABLE
-};
diff --git a/drivers/media/dvb/frontends/drxd_firm.h b/drivers/media/dvb/frontends/drxd_firm.h
deleted file mode 100644
index 41597e8..0000000
--- a/drivers/media/dvb/frontends/drxd_firm.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * drxd_firm.h
- *
- * Copyright (C) 2006-2007 Micronas
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 only, as published by the Free Software Foundation.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef _DRXD_FIRM_H_
-#define _DRXD_FIRM_H_
-
-#include <linux/types.h>
-#include "drxd_map_firm.h"
-
-#define VERSION_MAJOR 1
-#define VERSION_MINOR 4
-#define VERSION_PATCH 23
-
-#define HI_TR_FUNC_ADDR HI_IF_RAM_USR_BEGIN__A
-
-#define DRXD_MAX_RETRIES (1000)
-#define HI_I2C_DELAY     84
-#define HI_I2C_BRIDGE_DELAY   750
-
-#define EQ_TD_TPS_PWR_UNKNOWN          0x00C0	/* Unknown configurations */
-#define EQ_TD_TPS_PWR_QPSK             0x016a
-#define EQ_TD_TPS_PWR_QAM16_ALPHAN     0x0195
-#define EQ_TD_TPS_PWR_QAM16_ALPHA1     0x0195
-#define EQ_TD_TPS_PWR_QAM16_ALPHA2     0x011E
-#define EQ_TD_TPS_PWR_QAM16_ALPHA4     0x01CE
-#define EQ_TD_TPS_PWR_QAM64_ALPHAN     0x019F
-#define EQ_TD_TPS_PWR_QAM64_ALPHA1     0x019F
-#define EQ_TD_TPS_PWR_QAM64_ALPHA2     0x00F8
-#define EQ_TD_TPS_PWR_QAM64_ALPHA4     0x014D
-
-#define DRXD_DEF_AG_PWD_CONSUMER 0x000E
-#define DRXD_DEF_AG_PWD_PRO 0x0000
-#define DRXD_DEF_AG_AGC_SIO 0x0000
-
-#define DRXD_FE_CTRL_MAX 1023
-
-#define DRXD_OSCDEV_DO_SCAN  (16)
-
-#define DRXD_OSCDEV_DONT_SCAN  (0)
-
-#define DRXD_OSCDEV_STEP  (275)
-
-#define DRXD_SCAN_TIMEOUT    (650)
-
-#define DRXD_BANDWIDTH_8MHZ_IN_HZ  (0x8B8249L)
-#define DRXD_BANDWIDTH_7MHZ_IN_HZ  (0x7A1200L)
-#define DRXD_BANDWIDTH_6MHZ_IN_HZ  (0x68A1B6L)
-
-#define IRLEN_COARSE_8K       (10)
-#define IRLEN_FINE_8K         (10)
-#define IRLEN_COARSE_2K       (7)
-#define IRLEN_FINE_2K         (9)
-#define DIFF_INVALID          (511)
-#define DIFF_TARGET           (4)
-#define DIFF_MARGIN           (1)
-
-extern u8 DRXD_InitAtomicRead[];
-extern u8 DRXD_HiI2cPatch_1[];
-extern u8 DRXD_HiI2cPatch_3[];
-
-extern u8 DRXD_InitSC[];
-
-extern u8 DRXD_ResetCEFR[];
-extern u8 DRXD_InitFEA2_1[];
-extern u8 DRXD_InitFEA2_2[];
-extern u8 DRXD_InitCPA2[];
-extern u8 DRXD_InitCEA2[];
-extern u8 DRXD_InitEQA2[];
-extern u8 DRXD_InitECA2[];
-extern u8 DRXD_ResetECA2[];
-extern u8 DRXD_ResetECRAM[];
-
-extern u8 DRXD_A2_microcode[];
-extern u32 DRXD_A2_microcode_length;
-
-extern u8 DRXD_InitFEB1_1[];
-extern u8 DRXD_InitFEB1_2[];
-extern u8 DRXD_InitCPB1[];
-extern u8 DRXD_InitCEB1[];
-extern u8 DRXD_InitEQB1[];
-extern u8 DRXD_InitECB1[];
-
-extern u8 DRXD_InitDiversityFront[];
-extern u8 DRXD_InitDiversityEnd[];
-extern u8 DRXD_DisableDiversity[];
-extern u8 DRXD_StartDiversityFront[];
-extern u8 DRXD_StartDiversityEnd[];
-
-extern u8 DRXD_DiversityDelay8MHZ[];
-extern u8 DRXD_DiversityDelay6MHZ[];
-
-extern u8 DRXD_B1_microcode[];
-extern u32 DRXD_B1_microcode_length;
-
-#endif
diff --git a/drivers/media/dvb/frontends/drxd_hard.c b/drivers/media/dvb/frontends/drxd_hard.c
deleted file mode 100644
index f380eb4..0000000
--- a/drivers/media/dvb/frontends/drxd_hard.c
+++ /dev/null
@@ -1,2992 +0,0 @@
-/*
- * drxd_hard.c: DVB-T Demodulator Micronas DRX3975D-A2,DRX397xD-B1
- *
- * Copyright (C) 2003-2007 Micronas
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 only, as published by the Free Software Foundation.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/firmware.h>
-#include <linux/i2c.h>
-#include <asm/div64.h>
-
-#include "dvb_frontend.h"
-#include "drxd.h"
-#include "drxd_firm.h"
-
-#define DRX_FW_FILENAME_A2 "drxd-a2-1.1.fw"
-#define DRX_FW_FILENAME_B1 "drxd-b1-1.1.fw"
-
-#define CHUNK_SIZE 48
-
-#define DRX_I2C_RMW           0x10
-#define DRX_I2C_BROADCAST     0x20
-#define DRX_I2C_CLEARCRC      0x80
-#define DRX_I2C_SINGLE_MASTER 0xC0
-#define DRX_I2C_MODEFLAGS     0xC0
-#define DRX_I2C_FLAGS         0xF0
-
-#ifndef SIZEOF_ARRAY
-#define SIZEOF_ARRAY(array) (sizeof((array))/sizeof((array)[0]))
-#endif
-
-#define DEFAULT_LOCK_TIMEOUT    1100
-
-#define DRX_CHANNEL_AUTO 0
-#define DRX_CHANNEL_HIGH 1
-#define DRX_CHANNEL_LOW  2
-
-#define DRX_LOCK_MPEG  1
-#define DRX_LOCK_FEC   2
-#define DRX_LOCK_DEMOD 4
-
-/****************************************************************************/
-
-enum CSCDState {
-	CSCD_INIT = 0,
-	CSCD_SET,
-	CSCD_SAVED
-};
-
-enum CDrxdState {
-	DRXD_UNINITIALIZED = 0,
-	DRXD_STOPPED,
-	DRXD_STARTED
-};
-
-enum AGC_CTRL_MODE {
-	AGC_CTRL_AUTO = 0,
-	AGC_CTRL_USER,
-	AGC_CTRL_OFF
-};
-
-enum OperationMode {
-	OM_Default,
-	OM_DVBT_Diversity_Front,
-	OM_DVBT_Diversity_End
-};
-
-struct SCfgAgc {
-	enum AGC_CTRL_MODE ctrlMode;
-	u16 outputLevel;	/* range [0, ... , 1023], 1/n of fullscale range */
-	u16 settleLevel;	/* range [0, ... , 1023], 1/n of fullscale range */
-	u16 minOutputLevel;	/* range [0, ... , 1023], 1/n of fullscale range */
-	u16 maxOutputLevel;	/* range [0, ... , 1023], 1/n of fullscale range */
-	u16 speed;		/* range [0, ... , 1023], 1/n of fullscale range */
-
-	u16 R1;
-	u16 R2;
-	u16 R3;
-};
-
-struct SNoiseCal {
-	int cpOpt;
-	short cpNexpOfs;
-	short tdCal2k;
-	short tdCal8k;
-};
-
-enum app_env {
-	APPENV_STATIC = 0,
-	APPENV_PORTABLE = 1,
-	APPENV_MOBILE = 2
-};
-
-enum EIFFilter {
-	IFFILTER_SAW = 0,
-	IFFILTER_DISCRETE = 1
-};
-
-struct drxd_state {
-	struct dvb_frontend frontend;
-	struct dvb_frontend_ops ops;
-	struct dtv_frontend_properties props;
-
-	const struct firmware *fw;
-	struct device *dev;
-
-	struct i2c_adapter *i2c;
-	void *priv;
-	struct drxd_config config;
-
-	int i2c_access;
-	int init_done;
-	struct mutex mutex;
-
-	u8 chip_adr;
-	u16 hi_cfg_timing_div;
-	u16 hi_cfg_bridge_delay;
-	u16 hi_cfg_wakeup_key;
-	u16 hi_cfg_ctrl;
-
-	u16 intermediate_freq;
-	u16 osc_clock_freq;
-
-	enum CSCDState cscd_state;
-	enum CDrxdState drxd_state;
-
-	u16 sys_clock_freq;
-	s16 osc_clock_deviation;
-	u16 expected_sys_clock_freq;
-
-	u16 insert_rs_byte;
-	u16 enable_parallel;
-
-	int operation_mode;
-
-	struct SCfgAgc if_agc_cfg;
-	struct SCfgAgc rf_agc_cfg;
-
-	struct SNoiseCal noise_cal;
-
-	u32 fe_fs_add_incr;
-	u32 org_fe_fs_add_incr;
-	u16 current_fe_if_incr;
-
-	u16 m_FeAgRegAgPwd;
-	u16 m_FeAgRegAgAgcSio;
-
-	u16 m_EcOcRegOcModeLop;
-	u16 m_EcOcRegSncSncLvl;
-	u8 *m_InitAtomicRead;
-	u8 *m_HiI2cPatch;
-
-	u8 *m_ResetCEFR;
-	u8 *m_InitFE_1;
-	u8 *m_InitFE_2;
-	u8 *m_InitCP;
-	u8 *m_InitCE;
-	u8 *m_InitEQ;
-	u8 *m_InitSC;
-	u8 *m_InitEC;
-	u8 *m_ResetECRAM;
-	u8 *m_InitDiversityFront;
-	u8 *m_InitDiversityEnd;
-	u8 *m_DisableDiversity;
-	u8 *m_StartDiversityFront;
-	u8 *m_StartDiversityEnd;
-
-	u8 *m_DiversityDelay8MHZ;
-	u8 *m_DiversityDelay6MHZ;
-
-	u8 *microcode;
-	u32 microcode_length;
-
-	int type_A;
-	int PGA;
-	int diversity;
-	int tuner_mirrors;
-
-	enum app_env app_env_default;
-	enum app_env app_env_diversity;
-
-};
-
-/****************************************************************************/
-/* I2C **********************************************************************/
-/****************************************************************************/
-
-static int i2c_write(struct i2c_adapter *adap, u8 adr, u8 * data, int len)
-{
-	struct i2c_msg msg = {.addr = adr, .flags = 0, .buf = data, .len = len };
-
-	if (i2c_transfer(adap, &msg, 1) != 1)
-		return -1;
-	return 0;
-}
-
-static int i2c_read(struct i2c_adapter *adap,
-		    u8 adr, u8 *msg, int len, u8 *answ, int alen)
-{
-	struct i2c_msg msgs[2] = {
-		{
-			.addr = adr, .flags = 0,
-			.buf = msg, .len = len
-		}, {
-			.addr = adr, .flags = I2C_M_RD,
-			.buf = answ, .len = alen
-		}
-	};
-	if (i2c_transfer(adap, msgs, 2) != 2)
-		return -1;
-	return 0;
-}
-
-static inline u32 MulDiv32(u32 a, u32 b, u32 c)
-{
-	u64 tmp64;
-
-	tmp64 = (u64)a * (u64)b;
-	do_div(tmp64, c);
-
-	return (u32) tmp64;
-}
-
-static int Read16(struct drxd_state *state, u32 reg, u16 *data, u8 flags)
-{
-	u8 adr = state->config.demod_address;
-	u8 mm1[4] = { reg & 0xff, (reg >> 16) & 0xff,
-		flags | ((reg >> 24) & 0xff), (reg >> 8) & 0xff
-	};
-	u8 mm2[2];
-	if (i2c_read(state->i2c, adr, mm1, 4, mm2, 2) < 0)
-		return -1;
-	if (data)
-		*data = mm2[0] | (mm2[1] << 8);
-	return mm2[0] | (mm2[1] << 8);
-}
-
-static int Read32(struct drxd_state *state, u32 reg, u32 *data, u8 flags)
-{
-	u8 adr = state->config.demod_address;
-	u8 mm1[4] = { reg & 0xff, (reg >> 16) & 0xff,
-		flags | ((reg >> 24) & 0xff), (reg >> 8) & 0xff
-	};
-	u8 mm2[4];
-
-	if (i2c_read(state->i2c, adr, mm1, 4, mm2, 4) < 0)
-		return -1;
-	if (data)
-		*data =
-		    mm2[0] | (mm2[1] << 8) | (mm2[2] << 16) | (mm2[3] << 24);
-	return 0;
-}
-
-static int Write16(struct drxd_state *state, u32 reg, u16 data, u8 flags)
-{
-	u8 adr = state->config.demod_address;
-	u8 mm[6] = { reg & 0xff, (reg >> 16) & 0xff,
-		flags | ((reg >> 24) & 0xff), (reg >> 8) & 0xff,
-		data & 0xff, (data >> 8) & 0xff
-	};
-
-	if (i2c_write(state->i2c, adr, mm, 6) < 0)
-		return -1;
-	return 0;
-}
-
-static int Write32(struct drxd_state *state, u32 reg, u32 data, u8 flags)
-{
-	u8 adr = state->config.demod_address;
-	u8 mm[8] = { reg & 0xff, (reg >> 16) & 0xff,
-		flags | ((reg >> 24) & 0xff), (reg >> 8) & 0xff,
-		data & 0xff, (data >> 8) & 0xff,
-		(data >> 16) & 0xff, (data >> 24) & 0xff
-	};
-
-	if (i2c_write(state->i2c, adr, mm, 8) < 0)
-		return -1;
-	return 0;
-}
-
-static int write_chunk(struct drxd_state *state,
-		       u32 reg, u8 *data, u32 len, u8 flags)
-{
-	u8 adr = state->config.demod_address;
-	u8 mm[CHUNK_SIZE + 4] = { reg & 0xff, (reg >> 16) & 0xff,
-		flags | ((reg >> 24) & 0xff), (reg >> 8) & 0xff
-	};
-	int i;
-
-	for (i = 0; i < len; i++)
-		mm[4 + i] = data[i];
-	if (i2c_write(state->i2c, adr, mm, 4 + len) < 0) {
-		printk(KERN_ERR "error in write_chunk\n");
-		return -1;
-	}
-	return 0;
-}
-
-static int WriteBlock(struct drxd_state *state,
-		      u32 Address, u16 BlockSize, u8 *pBlock, u8 Flags)
-{
-	while (BlockSize > 0) {
-		u16 Chunk = BlockSize > CHUNK_SIZE ? CHUNK_SIZE : BlockSize;
-
-		if (write_chunk(state, Address, pBlock, Chunk, Flags) < 0)
-			return -1;
-		pBlock += Chunk;
-		Address += (Chunk >> 1);
-		BlockSize -= Chunk;
-	}
-	return 0;
-}
-
-static int WriteTable(struct drxd_state *state, u8 * pTable)
-{
-	int status = 0;
-
-	if (pTable == NULL)
-		return 0;
-
-	while (!status) {
-		u16 Length;
-		u32 Address = pTable[0] | (pTable[1] << 8) |
-		    (pTable[2] << 16) | (pTable[3] << 24);
-
-		if (Address == 0xFFFFFFFF)
-			break;
-		pTable += sizeof(u32);
-
-		Length = pTable[0] | (pTable[1] << 8);
-		pTable += sizeof(u16);
-		if (!Length)
-			break;
-		status = WriteBlock(state, Address, Length * 2, pTable, 0);
-		pTable += (Length * 2);
-	}
-	return status;
-}
-
-/****************************************************************************/
-/****************************************************************************/
-/****************************************************************************/
-
-static int ResetCEFR(struct drxd_state *state)
-{
-	return WriteTable(state, state->m_ResetCEFR);
-}
-
-static int InitCP(struct drxd_state *state)
-{
-	return WriteTable(state, state->m_InitCP);
-}
-
-static int InitCE(struct drxd_state *state)
-{
-	int status;
-	enum app_env AppEnv = state->app_env_default;
-
-	do {
-		status = WriteTable(state, state->m_InitCE);
-		if (status < 0)
-			break;
-
-		if (state->operation_mode == OM_DVBT_Diversity_Front ||
-		    state->operation_mode == OM_DVBT_Diversity_End) {
-			AppEnv = state->app_env_diversity;
-		}
-		if (AppEnv == APPENV_STATIC) {
-			status = Write16(state, CE_REG_TAPSET__A, 0x0000, 0);
-			if (status < 0)
-				break;
-		} else if (AppEnv == APPENV_PORTABLE) {
-			status = Write16(state, CE_REG_TAPSET__A, 0x0001, 0);
-			if (status < 0)
-				break;
-		} else if (AppEnv == APPENV_MOBILE && state->type_A) {
-			status = Write16(state, CE_REG_TAPSET__A, 0x0002, 0);
-			if (status < 0)
-				break;
-		} else if (AppEnv == APPENV_MOBILE && !state->type_A) {
-			status = Write16(state, CE_REG_TAPSET__A, 0x0006, 0);
-			if (status < 0)
-				break;
-		}
-
-		/* start ce */
-		status = Write16(state, B_CE_REG_COMM_EXEC__A, 0x0001, 0);
-		if (status < 0)
-			break;
-	} while (0);
-	return status;
-}
-
-static int StopOC(struct drxd_state *state)
-{
-	int status = 0;
-	u16 ocSyncLvl = 0;
-	u16 ocModeLop = state->m_EcOcRegOcModeLop;
-	u16 dtoIncLop = 0;
-	u16 dtoIncHip = 0;
-
-	do {
-		/* Store output configuration */
-		status = Read16(state, EC_OC_REG_SNC_ISC_LVL__A, &ocSyncLvl, 0);
-		if (status < 0)
-			break;
-		/* CHK_ERROR(Read16(EC_OC_REG_OC_MODE_LOP__A, &ocModeLop)); */
-		state->m_EcOcRegSncSncLvl = ocSyncLvl;
-		/* m_EcOcRegOcModeLop = ocModeLop; */
-
-		/* Flush FIFO (byte-boundary) at fixed rate */
-		status = Read16(state, EC_OC_REG_RCN_MAP_LOP__A, &dtoIncLop, 0);
-		if (status < 0)
-			break;
-		status = Read16(state, EC_OC_REG_RCN_MAP_HIP__A, &dtoIncHip, 0);
-		if (status < 0)
-			break;
-		status = Write16(state, EC_OC_REG_DTO_INC_LOP__A, dtoIncLop, 0);
-		if (status < 0)
-			break;
-		status = Write16(state, EC_OC_REG_DTO_INC_HIP__A, dtoIncHip, 0);
-		if (status < 0)
-			break;
-		ocModeLop &= ~(EC_OC_REG_OC_MODE_LOP_DTO_CTR_SRC__M);
-		ocModeLop |= EC_OC_REG_OC_MODE_LOP_DTO_CTR_SRC_STATIC;
-		status = Write16(state, EC_OC_REG_OC_MODE_LOP__A, ocModeLop, 0);
-		if (status < 0)
-			break;
-		status = Write16(state, EC_OC_REG_COMM_EXEC__A, EC_OC_REG_COMM_EXEC_CTL_HOLD, 0);
-		if (status < 0)
-			break;
-
-		msleep(1);
-		/* Output pins to '0' */
-		status = Write16(state, EC_OC_REG_OCR_MPG_UOS__A, EC_OC_REG_OCR_MPG_UOS__M, 0);
-		if (status < 0)
-			break;
-
-		/* Force the OC out of sync */
-		ocSyncLvl &= ~(EC_OC_REG_SNC_ISC_LVL_OSC__M);
-		status = Write16(state, EC_OC_REG_SNC_ISC_LVL__A, ocSyncLvl, 0);
-		if (status < 0)
-			break;
-		ocModeLop &= ~(EC_OC_REG_OC_MODE_LOP_PAR_ENA__M);
-		ocModeLop |= EC_OC_REG_OC_MODE_LOP_PAR_ENA_ENABLE;
-		ocModeLop |= 0x2;	/* Magically-out-of-sync */
-		status = Write16(state, EC_OC_REG_OC_MODE_LOP__A, ocModeLop, 0);
-		if (status < 0)
-			break;
-		status = Write16(state, EC_OC_REG_COMM_INT_STA__A, 0x0, 0);
-		if (status < 0)
-			break;
-		status = Write16(state, EC_OC_REG_COMM_EXEC__A, EC_OC_REG_COMM_EXEC_CTL_ACTIVE, 0);
-		if (status < 0)
-			break;
-	} while (0);
-
-	return status;
-}
-
-static int StartOC(struct drxd_state *state)
-{
-	int status = 0;
-
-	do {
-		/* Stop OC */
-		status = Write16(state, EC_OC_REG_COMM_EXEC__A, EC_OC_REG_COMM_EXEC_CTL_HOLD, 0);
-		if (status < 0)
-			break;
-
-		/* Restore output configuration */
-		status = Write16(state, EC_OC_REG_SNC_ISC_LVL__A, state->m_EcOcRegSncSncLvl, 0);
-		if (status < 0)
-			break;
-		status = Write16(state, EC_OC_REG_OC_MODE_LOP__A, state->m_EcOcRegOcModeLop, 0);
-		if (status < 0)
-			break;
-
-		/* Output pins active again */
-		status = Write16(state, EC_OC_REG_OCR_MPG_UOS__A, EC_OC_REG_OCR_MPG_UOS_INIT, 0);
-		if (status < 0)
-			break;
-
-		/* Start OC */
-		status = Write16(state, EC_OC_REG_COMM_EXEC__A, EC_OC_REG_COMM_EXEC_CTL_ACTIVE, 0);
-		if (status < 0)
-			break;
-	} while (0);
-	return status;
-}
-
-static int InitEQ(struct drxd_state *state)
-{
-	return WriteTable(state, state->m_InitEQ);
-}
-
-static int InitEC(struct drxd_state *state)
-{
-	return WriteTable(state, state->m_InitEC);
-}
-
-static int InitSC(struct drxd_state *state)
-{
-	return WriteTable(state, state->m_InitSC);
-}
-
-static int InitAtomicRead(struct drxd_state *state)
-{
-	return WriteTable(state, state->m_InitAtomicRead);
-}
-
-static int CorrectSysClockDeviation(struct drxd_state *state);
-
-static int DRX_GetLockStatus(struct drxd_state *state, u32 * pLockStatus)
-{
-	u16 ScRaRamLock = 0;
-	const u16 mpeg_lock_mask = (SC_RA_RAM_LOCK_MPEG__M |
-				    SC_RA_RAM_LOCK_FEC__M |
-				    SC_RA_RAM_LOCK_DEMOD__M);
-	const u16 fec_lock_mask = (SC_RA_RAM_LOCK_FEC__M |
-				   SC_RA_RAM_LOCK_DEMOD__M);
-	const u16 demod_lock_mask = SC_RA_RAM_LOCK_DEMOD__M;
-
-	int status;
-
-	*pLockStatus = 0;
-
-	status = Read16(state, SC_RA_RAM_LOCK__A, &ScRaRamLock, 0x0000);
-	if (status < 0) {
-		printk(KERN_ERR "Can't read SC_RA_RAM_LOCK__A status = %08x\n", status);
-		return status;
-	}
-
-	if (state->drxd_state != DRXD_STARTED)
-		return 0;
-
-	if ((ScRaRamLock & mpeg_lock_mask) == mpeg_lock_mask) {
-		*pLockStatus |= DRX_LOCK_MPEG;
-		CorrectSysClockDeviation(state);
-	}
-
-	if ((ScRaRamLock & fec_lock_mask) == fec_lock_mask)
-		*pLockStatus |= DRX_LOCK_FEC;
-
-	if ((ScRaRamLock & demod_lock_mask) == demod_lock_mask)
-		*pLockStatus |= DRX_LOCK_DEMOD;
-	return 0;
-}
-
-/****************************************************************************/
-
-static int SetCfgIfAgc(struct drxd_state *state, struct SCfgAgc *cfg)
-{
-	int status;
-
-	if (cfg->outputLevel > DRXD_FE_CTRL_MAX)
-		return -1;
-
-	if (cfg->ctrlMode == AGC_CTRL_USER) {
-		do {
-			u16 FeAgRegPm1AgcWri;
-			u16 FeAgRegAgModeLop;
-
-			status = Read16(state, FE_AG_REG_AG_MODE_LOP__A, &FeAgRegAgModeLop, 0);
-			if (status < 0)
-				break;
-			FeAgRegAgModeLop &= (~FE_AG_REG_AG_MODE_LOP_MODE_4__M);
-			FeAgRegAgModeLop |= FE_AG_REG_AG_MODE_LOP_MODE_4_STATIC;
-			status = Write16(state, FE_AG_REG_AG_MODE_LOP__A, FeAgRegAgModeLop, 0);
-			if (status < 0)
-				break;
-
-			FeAgRegPm1AgcWri = (u16) (cfg->outputLevel &
-						  FE_AG_REG_PM1_AGC_WRI__M);
-			status = Write16(state, FE_AG_REG_PM1_AGC_WRI__A, FeAgRegPm1AgcWri, 0);
-			if (status < 0)
-				break;
-		} while (0);
-	} else if (cfg->ctrlMode == AGC_CTRL_AUTO) {
-		if (((cfg->maxOutputLevel) < (cfg->minOutputLevel)) ||
-		    ((cfg->maxOutputLevel) > DRXD_FE_CTRL_MAX) ||
-		    ((cfg->speed) > DRXD_FE_CTRL_MAX) ||
-		    ((cfg->settleLevel) > DRXD_FE_CTRL_MAX)
-		    )
-			return -1;
-		do {
-			u16 FeAgRegAgModeLop;
-			u16 FeAgRegEgcSetLvl;
-			u16 slope, offset;
-
-			/* == Mode == */
-
-			status = Read16(state, FE_AG_REG_AG_MODE_LOP__A, &FeAgRegAgModeLop, 0);
-			if (status < 0)
-				break;
-			FeAgRegAgModeLop &= (~FE_AG_REG_AG_MODE_LOP_MODE_4__M);
-			FeAgRegAgModeLop |=
-			    FE_AG_REG_AG_MODE_LOP_MODE_4_DYNAMIC;
-			status = Write16(state, FE_AG_REG_AG_MODE_LOP__A, FeAgRegAgModeLop, 0);
-			if (status < 0)
-				break;
-
-			/* == Settle level == */
-
-			FeAgRegEgcSetLvl = (u16) ((cfg->settleLevel >> 1) &
-						  FE_AG_REG_EGC_SET_LVL__M);
-			status = Write16(state, FE_AG_REG_EGC_SET_LVL__A, FeAgRegEgcSetLvl, 0);
-			if (status < 0)
-				break;
-
-			/* == Min/Max == */
-
-			slope = (u16) ((cfg->maxOutputLevel -
-					cfg->minOutputLevel) / 2);
-			offset = (u16) ((cfg->maxOutputLevel +
-					 cfg->minOutputLevel) / 2 - 511);
-
-			status = Write16(state, FE_AG_REG_GC1_AGC_RIC__A, slope, 0);
-			if (status < 0)
-				break;
-			status = Write16(state, FE_AG_REG_GC1_AGC_OFF__A, offset, 0);
-			if (status < 0)
-				break;
-
-			/* == Speed == */
-			{
-				const u16 maxRur = 8;
-				const u16 slowIncrDecLUT[] = { 3, 4, 4, 5, 6 };
-				const u16 fastIncrDecLUT[] = { 14, 15, 15, 16,
-					17, 18, 18, 19,
-					20, 21, 22, 23,
-					24, 26, 27, 28,
-					29, 31
-				};
-
-				u16 fineSteps = (DRXD_FE_CTRL_MAX + 1) /
-				    (maxRur + 1);
-				u16 fineSpeed = (u16) (cfg->speed -
-						       ((cfg->speed /
-							 fineSteps) *
-							fineSteps));
-				u16 invRurCount = (u16) (cfg->speed /
-							 fineSteps);
-				u16 rurCount;
-				if (invRurCount > maxRur) {
-					rurCount = 0;
-					fineSpeed += fineSteps;
-				} else {
-					rurCount = maxRur - invRurCount;
-				}
-
-				/*
-				   fastInc = default *
-				   (2^(fineSpeed/fineSteps))
-				   => range[default...2*default>
-				   slowInc = default *
-				   (2^(fineSpeed/fineSteps))
-				 */
-				{
-					u16 fastIncrDec =
-					    fastIncrDecLUT[fineSpeed /
-							   ((fineSteps /
-							     (14 + 1)) + 1)];
-					u16 slowIncrDec =
-					    slowIncrDecLUT[fineSpeed /
-							   (fineSteps /
-							    (3 + 1))];
-
-					status = Write16(state, FE_AG_REG_EGC_RUR_CNT__A, rurCount, 0);
-					if (status < 0)
-						break;
-					status = Write16(state, FE_AG_REG_EGC_FAS_INC__A, fastIncrDec, 0);
-					if (status < 0)
-						break;
-					status = Write16(state, FE_AG_REG_EGC_FAS_DEC__A, fastIncrDec, 0);
-					if (status < 0)
-						break;
-					status = Write16(state, FE_AG_REG_EGC_SLO_INC__A, slowIncrDec, 0);
-					if (status < 0)
-						break;
-					status = Write16(state, FE_AG_REG_EGC_SLO_DEC__A, slowIncrDec, 0);
-					if (status < 0)
-						break;
-				}
-			}
-		} while (0);
-
-	} else {
-		/* No OFF mode for IF control */
-		return -1;
-	}
-	return status;
-}
-
-static int SetCfgRfAgc(struct drxd_state *state, struct SCfgAgc *cfg)
-{
-	int status = 0;
-
-	if (cfg->outputLevel > DRXD_FE_CTRL_MAX)
-		return -1;
-
-	if (cfg->ctrlMode == AGC_CTRL_USER) {
-		do {
-			u16 AgModeLop = 0;
-			u16 level = (cfg->outputLevel);
-
-			if (level == DRXD_FE_CTRL_MAX)
-				level++;
-
-			status = Write16(state, FE_AG_REG_PM2_AGC_WRI__A, level, 0x0000);
-			if (status < 0)
-				break;
-
-			/*==== Mode ====*/
-
-			/* Powerdown PD2, WRI source */
-			state->m_FeAgRegAgPwd &= ~(FE_AG_REG_AG_PWD_PWD_PD2__M);
-			state->m_FeAgRegAgPwd |=
-			    FE_AG_REG_AG_PWD_PWD_PD2_DISABLE;
-			status = Write16(state, FE_AG_REG_AG_PWD__A, state->m_FeAgRegAgPwd, 0x0000);
-			if (status < 0)
-				break;
-
-			status = Read16(state, FE_AG_REG_AG_MODE_LOP__A, &AgModeLop, 0x0000);
-			if (status < 0)
-				break;
-			AgModeLop &= (~(FE_AG_REG_AG_MODE_LOP_MODE_5__M |
-					FE_AG_REG_AG_MODE_LOP_MODE_E__M));
-			AgModeLop |= (FE_AG_REG_AG_MODE_LOP_MODE_5_STATIC |
-				      FE_AG_REG_AG_MODE_LOP_MODE_E_STATIC);
-			status = Write16(state, FE_AG_REG_AG_MODE_LOP__A, AgModeLop, 0x0000);
-			if (status < 0)
-				break;
-
-			/* enable AGC2 pin */
-			{
-				u16 FeAgRegAgAgcSio = 0;
-				status = Read16(state, FE_AG_REG_AG_AGC_SIO__A, &FeAgRegAgAgcSio, 0x0000);
-				if (status < 0)
-					break;
-				FeAgRegAgAgcSio &=
-				    ~(FE_AG_REG_AG_AGC_SIO_AGC_SIO_2__M);
-				FeAgRegAgAgcSio |=
-				    FE_AG_REG_AG_AGC_SIO_AGC_SIO_2_OUTPUT;
-				status = Write16(state, FE_AG_REG_AG_AGC_SIO__A, FeAgRegAgAgcSio, 0x0000);
-				if (status < 0)
-					break;
-			}
-
-		} while (0);
-	} else if (cfg->ctrlMode == AGC_CTRL_AUTO) {
-		u16 AgModeLop = 0;
-
-		do {
-			u16 level;
-			/* Automatic control */
-			/* Powerup PD2, AGC2 as output, TGC source */
-			(state->m_FeAgRegAgPwd) &=
-			    ~(FE_AG_REG_AG_PWD_PWD_PD2__M);
-			(state->m_FeAgRegAgPwd) |=
-			    FE_AG_REG_AG_PWD_PWD_PD2_DISABLE;
-			status = Write16(state, FE_AG_REG_AG_PWD__A, (state->m_FeAgRegAgPwd), 0x0000);
-			if (status < 0)
-				break;
-
-			status = Read16(state, FE_AG_REG_AG_MODE_LOP__A, &AgModeLop, 0x0000);
-			if (status < 0)
-				break;
-			AgModeLop &= (~(FE_AG_REG_AG_MODE_LOP_MODE_5__M |
-					FE_AG_REG_AG_MODE_LOP_MODE_E__M));
-			AgModeLop |= (FE_AG_REG_AG_MODE_LOP_MODE_5_STATIC |
-				      FE_AG_REG_AG_MODE_LOP_MODE_E_DYNAMIC);
-			status = Write16(state, FE_AG_REG_AG_MODE_LOP__A, AgModeLop, 0x0000);
-			if (status < 0)
-				break;
-			/* Settle level */
-			level = (((cfg->settleLevel) >> 4) &
-				 FE_AG_REG_TGC_SET_LVL__M);
-			status = Write16(state, FE_AG_REG_TGC_SET_LVL__A, level, 0x0000);
-			if (status < 0)
-				break;
-
-			/* Min/max: don't care */
-
-			/* Speed: TODO */
-
-			/* enable AGC2 pin */
-			{
-				u16 FeAgRegAgAgcSio = 0;
-				status = Read16(state, FE_AG_REG_AG_AGC_SIO__A, &FeAgRegAgAgcSio, 0x0000);
-				if (status < 0)
-					break;
-				FeAgRegAgAgcSio &=
-				    ~(FE_AG_REG_AG_AGC_SIO_AGC_SIO_2__M);
-				FeAgRegAgAgcSio |=
-				    FE_AG_REG_AG_AGC_SIO_AGC_SIO_2_OUTPUT;
-				status = Write16(state, FE_AG_REG_AG_AGC_SIO__A, FeAgRegAgAgcSio, 0x0000);
-				if (status < 0)
-					break;
-			}
-
-		} while (0);
-	} else {
-		u16 AgModeLop = 0;
-
-		do {
-			/* No RF AGC control */
-			/* Powerdown PD2, AGC2 as output, WRI source */
-			(state->m_FeAgRegAgPwd) &=
-			    ~(FE_AG_REG_AG_PWD_PWD_PD2__M);
-			(state->m_FeAgRegAgPwd) |=
-			    FE_AG_REG_AG_PWD_PWD_PD2_ENABLE;
-			status = Write16(state, FE_AG_REG_AG_PWD__A, (state->m_FeAgRegAgPwd), 0x0000);
-			if (status < 0)
-				break;
-
-			status = Read16(state, FE_AG_REG_AG_MODE_LOP__A, &AgModeLop, 0x0000);
-			if (status < 0)
-				break;
-			AgModeLop &= (~(FE_AG_REG_AG_MODE_LOP_MODE_5__M |
-					FE_AG_REG_AG_MODE_LOP_MODE_E__M));
-			AgModeLop |= (FE_AG_REG_AG_MODE_LOP_MODE_5_STATIC |
-				      FE_AG_REG_AG_MODE_LOP_MODE_E_STATIC);
-			status = Write16(state, FE_AG_REG_AG_MODE_LOP__A, AgModeLop, 0x0000);
-			if (status < 0)
-				break;
-
-			/* set FeAgRegAgAgcSio AGC2 (RF) as input */
-			{
-				u16 FeAgRegAgAgcSio = 0;
-				status = Read16(state, FE_AG_REG_AG_AGC_SIO__A, &FeAgRegAgAgcSio, 0x0000);
-				if (status < 0)
-					break;
-				FeAgRegAgAgcSio &=
-				    ~(FE_AG_REG_AG_AGC_SIO_AGC_SIO_2__M);
-				FeAgRegAgAgcSio |=
-				    FE_AG_REG_AG_AGC_SIO_AGC_SIO_2_INPUT;
-				status = Write16(state, FE_AG_REG_AG_AGC_SIO__A, FeAgRegAgAgcSio, 0x0000);
-				if (status < 0)
-					break;
-			}
-		} while (0);
-	}
-	return status;
-}
-
-static int ReadIFAgc(struct drxd_state *state, u32 * pValue)
-{
-	int status = 0;
-
-	*pValue = 0;
-	if (state->if_agc_cfg.ctrlMode != AGC_CTRL_OFF) {
-		u16 Value;
-		status = Read16(state, FE_AG_REG_GC1_AGC_DAT__A, &Value, 0);
-		Value &= FE_AG_REG_GC1_AGC_DAT__M;
-		if (status >= 0) {
-			/*           3.3V
-			   |
-			   R1
-			   |
-			   Vin - R3 - * -- Vout
-			   |
-			   R2
-			   |
-			   GND
-			 */
-			u32 R1 = state->if_agc_cfg.R1;
-			u32 R2 = state->if_agc_cfg.R2;
-			u32 R3 = state->if_agc_cfg.R3;
-
-			u32 Vmax, Rpar, Vmin, Vout;
-
-			if (R2 == 0 && (R1 == 0 || R3 == 0))
-				return 0;
-
-			Vmax = (3300 * R2) / (R1 + R2);
-			Rpar = (R2 * R3) / (R3 + R2);
-			Vmin = (3300 * Rpar) / (R1 + Rpar);
-			Vout = Vmin + ((Vmax - Vmin) * Value) / 1024;
-
-			*pValue = Vout;
-		}
-	}
-	return status;
-}
-
-static int load_firmware(struct drxd_state *state, const char *fw_name)
-{
-	const struct firmware *fw;
-
-	if (request_firmware(&fw, fw_name, state->dev) < 0) {
-		printk(KERN_ERR "drxd: firmware load failure [%s]\n", fw_name);
-		return -EIO;
-	}
-
-	state->microcode = kmemdup(fw->data, fw->size, GFP_KERNEL);
-	if (state->microcode == NULL) {
-		release_firmware(fw);
-		printk(KERN_ERR "drxd: firmware load failure: no memory\n");
-		return -ENOMEM;
-	}
-
-	state->microcode_length = fw->size;
-	release_firmware(fw);
-	return 0;
-}
-
-static int DownloadMicrocode(struct drxd_state *state,
-			     const u8 *pMCImage, u32 Length)
-{
-	u8 *pSrc;
-	u32 Address;
-	u16 nBlocks;
-	u16 BlockSize;
-	u32 offset = 0;
-	int i, status = 0;
-
-	pSrc = (u8 *) pMCImage;
-	/* We're not using Flags */
-	/* Flags = (pSrc[0] << 8) | pSrc[1]; */
-	pSrc += sizeof(u16);
-	offset += sizeof(u16);
-	nBlocks = (pSrc[0] << 8) | pSrc[1];
-	pSrc += sizeof(u16);
-	offset += sizeof(u16);
-
-	for (i = 0; i < nBlocks; i++) {
-		Address = (pSrc[0] << 24) | (pSrc[1] << 16) |
-		    (pSrc[2] << 8) | pSrc[3];
-		pSrc += sizeof(u32);
-		offset += sizeof(u32);
-
-		BlockSize = ((pSrc[0] << 8) | pSrc[1]) * sizeof(u16);
-		pSrc += sizeof(u16);
-		offset += sizeof(u16);
-
-		/* We're not using Flags */
-		/* u16 Flags = (pSrc[0] << 8) | pSrc[1]; */
-		pSrc += sizeof(u16);
-		offset += sizeof(u16);
-
-		/* We're not using BlockCRC */
-		/* u16 BlockCRC = (pSrc[0] << 8) | pSrc[1]; */
-		pSrc += sizeof(u16);
-		offset += sizeof(u16);
-
-		status = WriteBlock(state, Address, BlockSize,
-				    pSrc, DRX_I2C_CLEARCRC);
-		if (status < 0)
-			break;
-		pSrc += BlockSize;
-		offset += BlockSize;
-	}
-
-	return status;
-}
-
-static int HI_Command(struct drxd_state *state, u16 cmd, u16 * pResult)
-{
-	u32 nrRetries = 0;
-	u16 waitCmd;
-	int status;
-
-	status = Write16(state, HI_RA_RAM_SRV_CMD__A, cmd, 0);
-	if (status < 0)
-		return status;
-
-	do {
-		nrRetries += 1;
-		if (nrRetries > DRXD_MAX_RETRIES) {
-			status = -1;
-			break;
-		};
-		status = Read16(state, HI_RA_RAM_SRV_CMD__A, &waitCmd, 0);
-	} while (waitCmd != 0);
-
-	if (status >= 0)
-		status = Read16(state, HI_RA_RAM_SRV_RES__A, pResult, 0);
-	return status;
-}
-
-static int HI_CfgCommand(struct drxd_state *state)
-{
-	int status = 0;
-
-	mutex_lock(&state->mutex);
-	Write16(state, HI_RA_RAM_SRV_CFG_KEY__A, HI_RA_RAM_SRV_RST_KEY_ACT, 0);
-	Write16(state, HI_RA_RAM_SRV_CFG_DIV__A, state->hi_cfg_timing_div, 0);
-	Write16(state, HI_RA_RAM_SRV_CFG_BDL__A, state->hi_cfg_bridge_delay, 0);
-	Write16(state, HI_RA_RAM_SRV_CFG_WUP__A, state->hi_cfg_wakeup_key, 0);
-	Write16(state, HI_RA_RAM_SRV_CFG_ACT__A, state->hi_cfg_ctrl, 0);
-
-	Write16(state, HI_RA_RAM_SRV_CFG_KEY__A, HI_RA_RAM_SRV_RST_KEY_ACT, 0);
-
-	if ((state->hi_cfg_ctrl & HI_RA_RAM_SRV_CFG_ACT_PWD_EXE) ==
-	    HI_RA_RAM_SRV_CFG_ACT_PWD_EXE)
-		status = Write16(state, HI_RA_RAM_SRV_CMD__A,
-				 HI_RA_RAM_SRV_CMD_CONFIG, 0);
-	else
-		status = HI_Command(state, HI_RA_RAM_SRV_CMD_CONFIG, 0);
-	mutex_unlock(&state->mutex);
-	return status;
-}
-
-static int InitHI(struct drxd_state *state)
-{
-	state->hi_cfg_wakeup_key = (state->chip_adr);
-	/* port/bridge/power down ctrl */
-	state->hi_cfg_ctrl = HI_RA_RAM_SRV_CFG_ACT_SLV0_ON;
-	return HI_CfgCommand(state);
-}
-
-static int HI_ResetCommand(struct drxd_state *state)
-{
-	int status;
-
-	mutex_lock(&state->mutex);
-	status = Write16(state, HI_RA_RAM_SRV_RST_KEY__A,
-			 HI_RA_RAM_SRV_RST_KEY_ACT, 0);
-	if (status == 0)
-		status = HI_Command(state, HI_RA_RAM_SRV_CMD_RESET, 0);
-	mutex_unlock(&state->mutex);
-	msleep(1);
-	return status;
-}
-
-static int DRX_ConfigureI2CBridge(struct drxd_state *state, int bEnableBridge)
-{
-	state->hi_cfg_ctrl &= (~HI_RA_RAM_SRV_CFG_ACT_BRD__M);
-	if (bEnableBridge)
-		state->hi_cfg_ctrl |= HI_RA_RAM_SRV_CFG_ACT_BRD_ON;
-	else
-		state->hi_cfg_ctrl |= HI_RA_RAM_SRV_CFG_ACT_BRD_OFF;
-
-	return HI_CfgCommand(state);
-}
-
-#define HI_TR_WRITE      0x9
-#define HI_TR_READ       0xA
-#define HI_TR_READ_WRITE 0xB
-#define HI_TR_BROADCAST  0x4
-
-#if 0
-static int AtomicReadBlock(struct drxd_state *state,
-			   u32 Addr, u16 DataSize, u8 *pData, u8 Flags)
-{
-	int status;
-	int i = 0;
-
-	/* Parameter check */
-	if ((!pData) || ((DataSize & 1) != 0))
-		return -1;
-
-	mutex_lock(&state->mutex);
-
-	do {
-		/* Instruct HI to read n bytes */
-		/* TODO use proper names forthese egisters */
-		status = Write16(state, HI_RA_RAM_SRV_CFG_KEY__A, (HI_TR_FUNC_ADDR & 0xFFFF), 0);
-		if (status < 0)
-			break;
-		status = Write16(state, HI_RA_RAM_SRV_CFG_DIV__A, (u16) (Addr >> 16), 0);
-		if (status < 0)
-			break;
-		status = Write16(state, HI_RA_RAM_SRV_CFG_BDL__A, (u16) (Addr & 0xFFFF), 0);
-		if (status < 0)
-			break;
-		status = Write16(state, HI_RA_RAM_SRV_CFG_WUP__A, (u16) ((DataSize / 2) - 1), 0);
-		if (status < 0)
-			break;
-		status = Write16(state, HI_RA_RAM_SRV_CFG_ACT__A, HI_TR_READ, 0);
-		if (status < 0)
-			break;
-
-		status = HI_Command(state, HI_RA_RAM_SRV_CMD_EXECUTE, 0);
-		if (status < 0)
-			break;
-
-	} while (0);
-
-	if (status >= 0) {
-		for (i = 0; i < (DataSize / 2); i += 1) {
-			u16 word;
-
-			status = Read16(state, (HI_RA_RAM_USR_BEGIN__A + i),
-					&word, 0);
-			if (status < 0)
-				break;
-			pData[2 * i] = (u8) (word & 0xFF);
-			pData[(2 * i) + 1] = (u8) (word >> 8);
-		}
-	}
-	mutex_unlock(&state->mutex);
-	return status;
-}
-
-static int AtomicReadReg32(struct drxd_state *state,
-			   u32 Addr, u32 *pData, u8 Flags)
-{
-	u8 buf[sizeof(u32)];
-	int status;
-
-	if (!pData)
-		return -1;
-	status = AtomicReadBlock(state, Addr, sizeof(u32), buf, Flags);
-	*pData = (((u32) buf[0]) << 0) +
-	    (((u32) buf[1]) << 8) +
-	    (((u32) buf[2]) << 16) + (((u32) buf[3]) << 24);
-	return status;
-}
-#endif
-
-static int StopAllProcessors(struct drxd_state *state)
-{
-	return Write16(state, HI_COMM_EXEC__A,
-		       SC_COMM_EXEC_CTL_STOP, DRX_I2C_BROADCAST);
-}
-
-static int EnableAndResetMB(struct drxd_state *state)
-{
-	if (state->type_A) {
-		/* disable? monitor bus observe @ EC_OC */
-		Write16(state, EC_OC_REG_OC_MON_SIO__A, 0x0000, 0x0000);
-	}
-
-	/* do inverse broadcast, followed by explicit write to HI */
-	Write16(state, HI_COMM_MB__A, 0x0000, DRX_I2C_BROADCAST);
-	Write16(state, HI_COMM_MB__A, 0x0000, 0x0000);
-	return 0;
-}
-
-static int InitCC(struct drxd_state *state)
-{
-	if (state->osc_clock_freq == 0 ||
-	    state->osc_clock_freq > 20000 ||
-	    (state->osc_clock_freq % 4000) != 0) {
-		printk(KERN_ERR "invalid osc frequency %d\n", state->osc_clock_freq);
-		return -1;
-	}
-
-	Write16(state, CC_REG_OSC_MODE__A, CC_REG_OSC_MODE_M20, 0);
-	Write16(state, CC_REG_PLL_MODE__A, CC_REG_PLL_MODE_BYPASS_PLL |
-		CC_REG_PLL_MODE_PUMP_CUR_12, 0);
-	Write16(state, CC_REG_REF_DIVIDE__A, state->osc_clock_freq / 4000, 0);
-	Write16(state, CC_REG_PWD_MODE__A, CC_REG_PWD_MODE_DOWN_PLL, 0);
-	Write16(state, CC_REG_UPDATE__A, CC_REG_UPDATE_KEY, 0);
-
-	return 0;
-}
-
-static int ResetECOD(struct drxd_state *state)
-{
-	int status = 0;
-
-	if (state->type_A)
-		status = Write16(state, EC_OD_REG_SYNC__A, 0x0664, 0);
-	else
-		status = Write16(state, B_EC_OD_REG_SYNC__A, 0x0664, 0);
-
-	if (!(status < 0))
-		status = WriteTable(state, state->m_ResetECRAM);
-	if (!(status < 0))
-		status = Write16(state, EC_OD_REG_COMM_EXEC__A, 0x0001, 0);
-	return status;
-}
-
-/* Configure PGA switch */
-
-static int SetCfgPga(struct drxd_state *state, int pgaSwitch)
-{
-	int status;
-	u16 AgModeLop = 0;
-	u16 AgModeHip = 0;
-	do {
-		if (pgaSwitch) {
-			/* PGA on */
-			/* fine gain */
-			status = Read16(state, B_FE_AG_REG_AG_MODE_LOP__A, &AgModeLop, 0x0000);
-			if (status < 0)
-				break;
-			AgModeLop &= (~(B_FE_AG_REG_AG_MODE_LOP_MODE_C__M));
-			AgModeLop |= B_FE_AG_REG_AG_MODE_LOP_MODE_C_DYNAMIC;
-			status = Write16(state, B_FE_AG_REG_AG_MODE_LOP__A, AgModeLop, 0x0000);
-			if (status < 0)
-				break;
-
-			/* coarse gain */
-			status = Read16(state, B_FE_AG_REG_AG_MODE_HIP__A, &AgModeHip, 0x0000);
-			if (status < 0)
-				break;
-			AgModeHip &= (~(B_FE_AG_REG_AG_MODE_HIP_MODE_J__M));
-			AgModeHip |= B_FE_AG_REG_AG_MODE_HIP_MODE_J_DYNAMIC;
-			status = Write16(state, B_FE_AG_REG_AG_MODE_HIP__A, AgModeHip, 0x0000);
-			if (status < 0)
-				break;
-
-			/* enable fine and coarse gain, enable AAF,
-			   no ext resistor */
-			status = Write16(state, B_FE_AG_REG_AG_PGA_MODE__A, B_FE_AG_REG_AG_PGA_MODE_PFY_PCY_AFY_REN, 0x0000);
-			if (status < 0)
-				break;
-		} else {
-			/* PGA off, bypass */
-
-			/* fine gain */
-			status = Read16(state, B_FE_AG_REG_AG_MODE_LOP__A, &AgModeLop, 0x0000);
-			if (status < 0)
-				break;
-			AgModeLop &= (~(B_FE_AG_REG_AG_MODE_LOP_MODE_C__M));
-			AgModeLop |= B_FE_AG_REG_AG_MODE_LOP_MODE_C_STATIC;
-			status = Write16(state, B_FE_AG_REG_AG_MODE_LOP__A, AgModeLop, 0x0000);
-			if (status < 0)
-				break;
-
-			/* coarse gain */
-			status = Read16(state, B_FE_AG_REG_AG_MODE_HIP__A, &AgModeHip, 0x0000);
-			if (status < 0)
-				break;
-			AgModeHip &= (~(B_FE_AG_REG_AG_MODE_HIP_MODE_J__M));
-			AgModeHip |= B_FE_AG_REG_AG_MODE_HIP_MODE_J_STATIC;
-			status = Write16(state, B_FE_AG_REG_AG_MODE_HIP__A, AgModeHip, 0x0000);
-			if (status < 0)
-				break;
-
-			/* disable fine and coarse gain, enable AAF,
-			   no ext resistor */
-			status = Write16(state, B_FE_AG_REG_AG_PGA_MODE__A, B_FE_AG_REG_AG_PGA_MODE_PFN_PCN_AFY_REN, 0x0000);
-			if (status < 0)
-				break;
-		}
-	} while (0);
-	return status;
-}
-
-static int InitFE(struct drxd_state *state)
-{
-	int status;
-
-	do {
-		status = WriteTable(state, state->m_InitFE_1);
-		if (status < 0)
-			break;
-
-		if (state->type_A) {
-			status = Write16(state, FE_AG_REG_AG_PGA_MODE__A,
-					 FE_AG_REG_AG_PGA_MODE_PFN_PCN_AFY_REN,
-					 0);
-		} else {
-			if (state->PGA)
-				status = SetCfgPga(state, 0);
-			else
-				status =
-				    Write16(state, B_FE_AG_REG_AG_PGA_MODE__A,
-					    B_FE_AG_REG_AG_PGA_MODE_PFN_PCN_AFY_REN,
-					    0);
-		}
-
-		if (status < 0)
-			break;
-		status = Write16(state, FE_AG_REG_AG_AGC_SIO__A, state->m_FeAgRegAgAgcSio, 0x0000);
-		if (status < 0)
-			break;
-		status = Write16(state, FE_AG_REG_AG_PWD__A, state->m_FeAgRegAgPwd, 0x0000);
-		if (status < 0)
-			break;
-
-		status = WriteTable(state, state->m_InitFE_2);
-		if (status < 0)
-			break;
-
-	} while (0);
-
-	return status;
-}
-
-static int InitFT(struct drxd_state *state)
-{
-	/*
-	   norm OFFSET,  MB says =2 voor 8K en =3 voor 2K waarschijnlijk
-	   SC stuff
-	 */
-	return Write16(state, FT_REG_COMM_EXEC__A, 0x0001, 0x0000);
-}
-
-static int SC_WaitForReady(struct drxd_state *state)
-{
-	u16 curCmd;
-	int i;
-
-	for (i = 0; i < DRXD_MAX_RETRIES; i += 1) {
-		int status = Read16(state, SC_RA_RAM_CMD__A, &curCmd, 0);
-		if (status == 0 || curCmd == 0)
-			return status;
-	}
-	return -1;
-}
-
-static int SC_SendCommand(struct drxd_state *state, u16 cmd)
-{
-	int status = 0;
-	u16 errCode;
-
-	Write16(state, SC_RA_RAM_CMD__A, cmd, 0);
-	SC_WaitForReady(state);
-
-	Read16(state, SC_RA_RAM_CMD_ADDR__A, &errCode, 0);
-
-	if (errCode == 0xFFFF) {
-		printk(KERN_ERR "Command Error\n");
-		status = -1;
-	}
-
-	return status;
-}
-
-static int SC_ProcStartCommand(struct drxd_state *state,
-			       u16 subCmd, u16 param0, u16 param1)
-{
-	int status = 0;
-	u16 scExec;
-
-	mutex_lock(&state->mutex);
-	do {
-		Read16(state, SC_COMM_EXEC__A, &scExec, 0);
-		if (scExec != 1) {
-			status = -1;
-			break;
-		}
-		SC_WaitForReady(state);
-		Write16(state, SC_RA_RAM_CMD_ADDR__A, subCmd, 0);
-		Write16(state, SC_RA_RAM_PARAM1__A, param1, 0);
-		Write16(state, SC_RA_RAM_PARAM0__A, param0, 0);
-
-		SC_SendCommand(state, SC_RA_RAM_CMD_PROC_START);
-	} while (0);
-	mutex_unlock(&state->mutex);
-	return status;
-}
-
-static int SC_SetPrefParamCommand(struct drxd_state *state,
-				  u16 subCmd, u16 param0, u16 param1)
-{
-	int status;
-
-	mutex_lock(&state->mutex);
-	do {
-		status = SC_WaitForReady(state);
-		if (status < 0)
-			break;
-		status = Write16(state, SC_RA_RAM_CMD_ADDR__A, subCmd, 0);
-		if (status < 0)
-			break;
-		status = Write16(state, SC_RA_RAM_PARAM1__A, param1, 0);
-		if (status < 0)
-			break;
-		status = Write16(state, SC_RA_RAM_PARAM0__A, param0, 0);
-		if (status < 0)
-			break;
-
-		status = SC_SendCommand(state, SC_RA_RAM_CMD_SET_PREF_PARAM);
-		if (status < 0)
-			break;
-	} while (0);
-	mutex_unlock(&state->mutex);
-	return status;
-}
-
-#if 0
-static int SC_GetOpParamCommand(struct drxd_state *state, u16 * result)
-{
-	int status = 0;
-
-	mutex_lock(&state->mutex);
-	do {
-		status = SC_WaitForReady(state);
-		if (status < 0)
-			break;
-		status = SC_SendCommand(state, SC_RA_RAM_CMD_GET_OP_PARAM);
-		if (status < 0)
-			break;
-		status = Read16(state, SC_RA_RAM_PARAM0__A, result, 0);
-		if (status < 0)
-			break;
-	} while (0);
-	mutex_unlock(&state->mutex);
-	return status;
-}
-#endif
-
-static int ConfigureMPEGOutput(struct drxd_state *state, int bEnableOutput)
-{
-	int status;
-
-	do {
-		u16 EcOcRegIprInvMpg = 0;
-		u16 EcOcRegOcModeLop = 0;
-		u16 EcOcRegOcModeHip = 0;
-		u16 EcOcRegOcMpgSio = 0;
-
-		/*CHK_ERROR(Read16(state, EC_OC_REG_OC_MODE_LOP__A, &EcOcRegOcModeLop, 0)); */
-
-		if (state->operation_mode == OM_DVBT_Diversity_Front) {
-			if (bEnableOutput) {
-				EcOcRegOcModeHip |=
-				    B_EC_OC_REG_OC_MODE_HIP_MPG_BUS_SRC_MONITOR;
-			} else
-				EcOcRegOcMpgSio |= EC_OC_REG_OC_MPG_SIO__M;
-			EcOcRegOcModeLop |=
-			    EC_OC_REG_OC_MODE_LOP_PAR_ENA_DISABLE;
-		} else {
-			EcOcRegOcModeLop = state->m_EcOcRegOcModeLop;
-
-			if (bEnableOutput)
-				EcOcRegOcMpgSio &= (~(EC_OC_REG_OC_MPG_SIO__M));
-			else
-				EcOcRegOcMpgSio |= EC_OC_REG_OC_MPG_SIO__M;
-
-			/* Don't Insert RS Byte */
-			if (state->insert_rs_byte) {
-				EcOcRegOcModeLop &=
-				    (~(EC_OC_REG_OC_MODE_LOP_PAR_ENA__M));
-				EcOcRegOcModeHip &=
-				    (~EC_OC_REG_OC_MODE_HIP_MPG_PAR_VAL__M);
-				EcOcRegOcModeHip |=
-				    EC_OC_REG_OC_MODE_HIP_MPG_PAR_VAL_ENABLE;
-			} else {
-				EcOcRegOcModeLop |=
-				    EC_OC_REG_OC_MODE_LOP_PAR_ENA_DISABLE;
-				EcOcRegOcModeHip &=
-				    (~EC_OC_REG_OC_MODE_HIP_MPG_PAR_VAL__M);
-				EcOcRegOcModeHip |=
-				    EC_OC_REG_OC_MODE_HIP_MPG_PAR_VAL_DISABLE;
-			}
-
-			/* Mode = Parallel */
-			if (state->enable_parallel)
-				EcOcRegOcModeLop &=
-				    (~(EC_OC_REG_OC_MODE_LOP_MPG_TRM_MDE__M));
-			else
-				EcOcRegOcModeLop |=
-				    EC_OC_REG_OC_MODE_LOP_MPG_TRM_MDE_SERIAL;
-		}
-		/* Invert Data */
-		/* EcOcRegIprInvMpg |= 0x00FF; */
-		EcOcRegIprInvMpg &= (~(0x00FF));
-
-		/* Invert Error ( we don't use the pin ) */
-		/*  EcOcRegIprInvMpg |= 0x0100; */
-		EcOcRegIprInvMpg &= (~(0x0100));
-
-		/* Invert Start ( we don't use the pin ) */
-		/* EcOcRegIprInvMpg |= 0x0200; */
-		EcOcRegIprInvMpg &= (~(0x0200));
-
-		/* Invert Valid ( we don't use the pin ) */
-		/* EcOcRegIprInvMpg |= 0x0400; */
-		EcOcRegIprInvMpg &= (~(0x0400));
-
-		/* Invert Clock */
-		/* EcOcRegIprInvMpg |= 0x0800; */
-		EcOcRegIprInvMpg &= (~(0x0800));
-
-		/* EcOcRegOcModeLop =0x05; */
-		status = Write16(state, EC_OC_REG_IPR_INV_MPG__A, EcOcRegIprInvMpg, 0);
-		if (status < 0)
-			break;
-		status = Write16(state, EC_OC_REG_OC_MODE_LOP__A, EcOcRegOcModeLop, 0);
-		if (status < 0)
-			break;
-		status = Write16(state, EC_OC_REG_OC_MODE_HIP__A, EcOcRegOcModeHip, 0x0000);
-		if (status < 0)
-			break;
-		status = Write16(state, EC_OC_REG_OC_MPG_SIO__A, EcOcRegOcMpgSio, 0);
-		if (status < 0)
-			break;
-	} while (0);
-	return status;
-}
-
-static int SetDeviceTypeId(struct drxd_state *state)
-{
-	int status = 0;
-	u16 deviceId = 0;
-
-	do {
-		status = Read16(state, CC_REG_JTAGID_L__A, &deviceId, 0);
-		if (status < 0)
-			break;
-		/* TODO: why twice? */
-		status = Read16(state, CC_REG_JTAGID_L__A, &deviceId, 0);
-		if (status < 0)
-			break;
-		printk(KERN_INFO "drxd: deviceId = %04x\n", deviceId);
-
-		state->type_A = 0;
-		state->PGA = 0;
-		state->diversity = 0;
-		if (deviceId == 0) {	/* on A2 only 3975 available */
-			state->type_A = 1;
-			printk(KERN_INFO "DRX3975D-A2\n");
-		} else {
-			deviceId >>= 12;
-			printk(KERN_INFO "DRX397%dD-B1\n", deviceId);
-			switch (deviceId) {
-			case 4:
-				state->diversity = 1;
-			case 3:
-			case 7:
-				state->PGA = 1;
-				break;
-			case 6:
-				state->diversity = 1;
-			case 5:
-			case 8:
-				break;
-			default:
-				status = -1;
-				break;
-			}
-		}
-	} while (0);
-
-	if (status < 0)
-		return status;
-
-	/* Init Table selection */
-	state->m_InitAtomicRead = DRXD_InitAtomicRead;
-	state->m_InitSC = DRXD_InitSC;
-	state->m_ResetECRAM = DRXD_ResetECRAM;
-	if (state->type_A) {
-		state->m_ResetCEFR = DRXD_ResetCEFR;
-		state->m_InitFE_1 = DRXD_InitFEA2_1;
-		state->m_InitFE_2 = DRXD_InitFEA2_2;
-		state->m_InitCP = DRXD_InitCPA2;
-		state->m_InitCE = DRXD_InitCEA2;
-		state->m_InitEQ = DRXD_InitEQA2;
-		state->m_InitEC = DRXD_InitECA2;
-		if (load_firmware(state, DRX_FW_FILENAME_A2))
-			return -EIO;
-	} else {
-		state->m_ResetCEFR = NULL;
-		state->m_InitFE_1 = DRXD_InitFEB1_1;
-		state->m_InitFE_2 = DRXD_InitFEB1_2;
-		state->m_InitCP = DRXD_InitCPB1;
-		state->m_InitCE = DRXD_InitCEB1;
-		state->m_InitEQ = DRXD_InitEQB1;
-		state->m_InitEC = DRXD_InitECB1;
-		if (load_firmware(state, DRX_FW_FILENAME_B1))
-			return -EIO;
-	}
-	if (state->diversity) {
-		state->m_InitDiversityFront = DRXD_InitDiversityFront;
-		state->m_InitDiversityEnd = DRXD_InitDiversityEnd;
-		state->m_DisableDiversity = DRXD_DisableDiversity;
-		state->m_StartDiversityFront = DRXD_StartDiversityFront;
-		state->m_StartDiversityEnd = DRXD_StartDiversityEnd;
-		state->m_DiversityDelay8MHZ = DRXD_DiversityDelay8MHZ;
-		state->m_DiversityDelay6MHZ = DRXD_DiversityDelay6MHZ;
-	} else {
-		state->m_InitDiversityFront = NULL;
-		state->m_InitDiversityEnd = NULL;
-		state->m_DisableDiversity = NULL;
-		state->m_StartDiversityFront = NULL;
-		state->m_StartDiversityEnd = NULL;
-		state->m_DiversityDelay8MHZ = NULL;
-		state->m_DiversityDelay6MHZ = NULL;
-	}
-
-	return status;
-}
-
-static int CorrectSysClockDeviation(struct drxd_state *state)
-{
-	int status;
-	s32 incr = 0;
-	s32 nomincr = 0;
-	u32 bandwidth = 0;
-	u32 sysClockInHz = 0;
-	u32 sysClockFreq = 0;	/* in kHz */
-	s16 oscClockDeviation;
-	s16 Diff;
-
-	do {
-		/* Retrieve bandwidth and incr, sanity check */
-
-		/* These accesses should be AtomicReadReg32, but that
-		   causes trouble (at least for diversity */
-		status = Read32(state, LC_RA_RAM_IFINCR_NOM_L__A, ((u32 *) &nomincr), 0);
-		if (status < 0)
-			break;
-		status = Read32(state, FE_IF_REG_INCR0__A, (u32 *) &incr, 0);
-		if (status < 0)
-			break;
-
-		if (state->type_A) {
-			if ((nomincr - incr < -500) || (nomincr - incr > 500))
-				break;
-		} else {
-			if ((nomincr - incr < -2000) || (nomincr - incr > 2000))
-				break;
-		}
-
-		switch (state->props.bandwidth_hz) {
-		case 8000000:
-			bandwidth = DRXD_BANDWIDTH_8MHZ_IN_HZ;
-			break;
-		case 7000000:
-			bandwidth = DRXD_BANDWIDTH_7MHZ_IN_HZ;
-			break;
-		case 6000000:
-			bandwidth = DRXD_BANDWIDTH_6MHZ_IN_HZ;
-			break;
-		default:
-			return -1;
-			break;
-		}
-
-		/* Compute new sysclock value
-		   sysClockFreq = (((incr + 2^23)*bandwidth)/2^21)/1000 */
-		incr += (1 << 23);
-		sysClockInHz = MulDiv32(incr, bandwidth, 1 << 21);
-		sysClockFreq = (u32) (sysClockInHz / 1000);
-		/* rounding */
-		if ((sysClockInHz % 1000) > 500)
-			sysClockFreq++;
-
-		/* Compute clock deviation in ppm */
-		oscClockDeviation = (u16) ((((s32) (sysClockFreq) -
-					     (s32)
-					     (state->expected_sys_clock_freq)) *
-					    1000000L) /
-					   (s32)
-					   (state->expected_sys_clock_freq));
-
-		Diff = oscClockDeviation - state->osc_clock_deviation;
-		/*printk(KERN_INFO "sysclockdiff=%d\n", Diff); */
-		if (Diff >= -200 && Diff <= 200) {
-			state->sys_clock_freq = (u16) sysClockFreq;
-			if (oscClockDeviation != state->osc_clock_deviation) {
-				if (state->config.osc_deviation) {
-					state->config.osc_deviation(state->priv,
-								    oscClockDeviation,
-								    1);
-					state->osc_clock_deviation =
-					    oscClockDeviation;
-				}
-			}
-			/* switch OFF SRMM scan in SC */
-			status = Write16(state, SC_RA_RAM_SAMPLE_RATE_COUNT__A, DRXD_OSCDEV_DONT_SCAN, 0);
-			if (status < 0)
-				break;
-			/* overrule FE_IF internal value for
-			   proper re-locking */
-			status = Write16(state, SC_RA_RAM_IF_SAVE__AX, state->current_fe_if_incr, 0);
-			if (status < 0)
-				break;
-			state->cscd_state = CSCD_SAVED;
-		}
-	} while (0);
-
-	return status;
-}
-
-static int DRX_Stop(struct drxd_state *state)
-{
-	int status;
-
-	if (state->drxd_state != DRXD_STARTED)
-		return 0;
-
-	do {
-		if (state->cscd_state != CSCD_SAVED) {
-			u32 lock;
-			status = DRX_GetLockStatus(state, &lock);
-			if (status < 0)
-				break;
-		}
-
-		status = StopOC(state);
-		if (status < 0)
-			break;
-
-		state->drxd_state = DRXD_STOPPED;
-
-		status = ConfigureMPEGOutput(state, 0);
-		if (status < 0)
-			break;
-
-		if (state->type_A) {
-			/* Stop relevant processors off the device */
-			status = Write16(state, EC_OD_REG_COMM_EXEC__A, 0x0000, 0x0000);
-			if (status < 0)
-				break;
-
-			status = Write16(state, SC_COMM_EXEC__A, SC_COMM_EXEC_CTL_STOP, 0);
-			if (status < 0)
-				break;
-			status = Write16(state, LC_COMM_EXEC__A, SC_COMM_EXEC_CTL_STOP, 0);
-			if (status < 0)
-				break;
-		} else {
-			/* Stop all processors except HI & CC & FE */
-			status = Write16(state, B_SC_COMM_EXEC__A, SC_COMM_EXEC_CTL_STOP, 0);
-			if (status < 0)
-				break;
-			status = Write16(state, B_LC_COMM_EXEC__A, SC_COMM_EXEC_CTL_STOP, 0);
-			if (status < 0)
-				break;
-			status = Write16(state, B_FT_COMM_EXEC__A, SC_COMM_EXEC_CTL_STOP, 0);
-			if (status < 0)
-				break;
-			status = Write16(state, B_CP_COMM_EXEC__A, SC_COMM_EXEC_CTL_STOP, 0);
-			if (status < 0)
-				break;
-			status = Write16(state, B_CE_COMM_EXEC__A, SC_COMM_EXEC_CTL_STOP, 0);
-			if (status < 0)
-				break;
-			status = Write16(state, B_EQ_COMM_EXEC__A, SC_COMM_EXEC_CTL_STOP, 0);
-			if (status < 0)
-				break;
-			status = Write16(state, EC_OD_REG_COMM_EXEC__A, 0x0000, 0);
-			if (status < 0)
-				break;
-		}
-
-	} while (0);
-	return status;
-}
-
-int SetOperationMode(struct drxd_state *state, int oMode)
-{
-	int status;
-
-	do {
-		if (state->drxd_state != DRXD_STOPPED) {
-			status = -1;
-			break;
-		}
-
-		if (oMode == state->operation_mode) {
-			status = 0;
-			break;
-		}
-
-		if (oMode != OM_Default && !state->diversity) {
-			status = -1;
-			break;
-		}
-
-		switch (oMode) {
-		case OM_DVBT_Diversity_Front:
-			status = WriteTable(state, state->m_InitDiversityFront);
-			break;
-		case OM_DVBT_Diversity_End:
-			status = WriteTable(state, state->m_InitDiversityEnd);
-			break;
-		case OM_Default:
-			/* We need to check how to
-			   get DRXD out of diversity */
-		default:
-			status = WriteTable(state, state->m_DisableDiversity);
-			break;
-		}
-	} while (0);
-
-	if (!status)
-		state->operation_mode = oMode;
-	return status;
-}
-
-static int StartDiversity(struct drxd_state *state)
-{
-	int status = 0;
-	u16 rcControl;
-
-	do {
-		if (state->operation_mode == OM_DVBT_Diversity_Front) {
-			status = WriteTable(state, state->m_StartDiversityFront);
-			if (status < 0)
-				break;
-		} else if (state->operation_mode == OM_DVBT_Diversity_End) {
-			status = WriteTable(state, state->m_StartDiversityEnd);
-			if (status < 0)
-				break;
-			if (state->props.bandwidth_hz == 8000000) {
-				status = WriteTable(state, state->m_DiversityDelay8MHZ);
-				if (status < 0)
-					break;
-			} else {
-				status = WriteTable(state, state->m_DiversityDelay6MHZ);
-				if (status < 0)
-					break;
-			}
-
-			status = Read16(state, B_EQ_REG_RC_SEL_CAR__A, &rcControl, 0);
-			if (status < 0)
-				break;
-			rcControl &= ~(B_EQ_REG_RC_SEL_CAR_FFTMODE__M);
-			rcControl |= B_EQ_REG_RC_SEL_CAR_DIV_ON |
-			    /*  combining enabled */
-			    B_EQ_REG_RC_SEL_CAR_MEAS_A_CC |
-			    B_EQ_REG_RC_SEL_CAR_PASS_A_CC |
-			    B_EQ_REG_RC_SEL_CAR_LOCAL_A_CC;
-			status = Write16(state, B_EQ_REG_RC_SEL_CAR__A, rcControl, 0);
-			if (status < 0)
-				break;
-		}
-	} while (0);
-	return status;
-}
-
-static int SetFrequencyShift(struct drxd_state *state,
-			     u32 offsetFreq, int channelMirrored)
-{
-	int negativeShift = (state->tuner_mirrors == channelMirrored);
-
-	/* Handle all mirroring
-	 *
-	 * Note: ADC mirroring (aliasing) is implictly handled by limiting
-	 * feFsRegAddInc to 28 bits below
-	 * (if the result before masking is more than 28 bits, this means
-	 *  that the ADC is mirroring.
-	 * The masking is in fact the aliasing of the ADC)
-	 *
-	 */
-
-	/* Compute register value, unsigned computation */
-	state->fe_fs_add_incr = MulDiv32(state->intermediate_freq +
-					 offsetFreq,
-					 1 << 28, state->sys_clock_freq);
-	/* Remove integer part */
-	state->fe_fs_add_incr &= 0x0FFFFFFFL;
-	if (negativeShift)
-		state->fe_fs_add_incr = ((1 << 28) - state->fe_fs_add_incr);
-
-	/* Save the frequency shift without tunerOffset compensation
-	   for CtrlGetChannel. */
-	state->org_fe_fs_add_incr = MulDiv32(state->intermediate_freq,
-					     1 << 28, state->sys_clock_freq);
-	/* Remove integer part */
-	state->org_fe_fs_add_incr &= 0x0FFFFFFFL;
-	if (negativeShift)
-		state->org_fe_fs_add_incr = ((1L << 28) -
-					     state->org_fe_fs_add_incr);
-
-	return Write32(state, FE_FS_REG_ADD_INC_LOP__A,
-		       state->fe_fs_add_incr, 0);
-}
-
-static int SetCfgNoiseCalibration(struct drxd_state *state,
-				  struct SNoiseCal *noiseCal)
-{
-	u16 beOptEna;
-	int status = 0;
-
-	do {
-		status = Read16(state, SC_RA_RAM_BE_OPT_ENA__A, &beOptEna, 0);
-		if (status < 0)
-			break;
-		if (noiseCal->cpOpt) {
-			beOptEna |= (1 << SC_RA_RAM_BE_OPT_ENA_CP_OPT);
-		} else {
-			beOptEna &= ~(1 << SC_RA_RAM_BE_OPT_ENA_CP_OPT);
-			status = Write16(state, CP_REG_AC_NEXP_OFFS__A, noiseCal->cpNexpOfs, 0);
-			if (status < 0)
-				break;
-		}
-		status = Write16(state, SC_RA_RAM_BE_OPT_ENA__A, beOptEna, 0);
-		if (status < 0)
-			break;
-
-		if (!state->type_A) {
-			status = Write16(state, B_SC_RA_RAM_CO_TD_CAL_2K__A, noiseCal->tdCal2k, 0);
-			if (status < 0)
-				break;
-			status = Write16(state, B_SC_RA_RAM_CO_TD_CAL_8K__A, noiseCal->tdCal8k, 0);
-			if (status < 0)
-				break;
-		}
-	} while (0);
-
-	return status;
-}
-
-static int DRX_Start(struct drxd_state *state, s32 off)
-{
-	struct dtv_frontend_properties *p = &state->props;
-	int status;
-
-	u16 transmissionParams = 0;
-	u16 operationMode = 0;
-	u16 qpskTdTpsPwr = 0;
-	u16 qam16TdTpsPwr = 0;
-	u16 qam64TdTpsPwr = 0;
-	u32 feIfIncr = 0;
-	u32 bandwidth = 0;
-	int mirrorFreqSpect;
-
-	u16 qpskSnCeGain = 0;
-	u16 qam16SnCeGain = 0;
-	u16 qam64SnCeGain = 0;
-	u16 qpskIsGainMan = 0;
-	u16 qam16IsGainMan = 0;
-	u16 qam64IsGainMan = 0;
-	u16 qpskIsGainExp = 0;
-	u16 qam16IsGainExp = 0;
-	u16 qam64IsGainExp = 0;
-	u16 bandwidthParam = 0;
-
-	if (off < 0)
-		off = (off - 500) / 1000;
-	else
-		off = (off + 500) / 1000;
-
-	do {
-		if (state->drxd_state != DRXD_STOPPED)
-			return -1;
-		status = ResetECOD(state);
-		if (status < 0)
-			break;
-		if (state->type_A) {
-			status = InitSC(state);
-			if (status < 0)
-				break;
-		} else {
-			status = InitFT(state);
-			if (status < 0)
-				break;
-			status = InitCP(state);
-			if (status < 0)
-				break;
-			status = InitCE(state);
-			if (status < 0)
-				break;
-			status = InitEQ(state);
-			if (status < 0)
-				break;
-			status = InitSC(state);
-			if (status < 0)
-				break;
-		}
-
-		/* Restore current IF & RF AGC settings */
-
-		status = SetCfgIfAgc(state, &state->if_agc_cfg);
-		if (status < 0)
-			break;
-		status = SetCfgRfAgc(state, &state->rf_agc_cfg);
-		if (status < 0)
-			break;
-
-		mirrorFreqSpect = (state->props.inversion == INVERSION_ON);
-
-		switch (p->transmission_mode) {
-		default:	/* Not set, detect it automatically */
-			operationMode |= SC_RA_RAM_OP_AUTO_MODE__M;
-			/* fall through , try first guess DRX_FFTMODE_8K */
-		case TRANSMISSION_MODE_8K:
-			transmissionParams |= SC_RA_RAM_OP_PARAM_MODE_8K;
-			if (state->type_A) {
-				status = Write16(state, EC_SB_REG_TR_MODE__A, EC_SB_REG_TR_MODE_8K, 0x0000);
-				if (status < 0)
-					break;
-				qpskSnCeGain = 99;
-				qam16SnCeGain = 83;
-				qam64SnCeGain = 67;
-			}
-			break;
-		case TRANSMISSION_MODE_2K:
-			transmissionParams |= SC_RA_RAM_OP_PARAM_MODE_2K;
-			if (state->type_A) {
-				status = Write16(state, EC_SB_REG_TR_MODE__A, EC_SB_REG_TR_MODE_2K, 0x0000);
-				if (status < 0)
-					break;
-				qpskSnCeGain = 97;
-				qam16SnCeGain = 71;
-				qam64SnCeGain = 65;
-			}
-			break;
-		}
-
-		switch (p->guard_interval) {
-		case GUARD_INTERVAL_1_4:
-			transmissionParams |= SC_RA_RAM_OP_PARAM_GUARD_4;
-			break;
-		case GUARD_INTERVAL_1_8:
-			transmissionParams |= SC_RA_RAM_OP_PARAM_GUARD_8;
-			break;
-		case GUARD_INTERVAL_1_16:
-			transmissionParams |= SC_RA_RAM_OP_PARAM_GUARD_16;
-			break;
-		case GUARD_INTERVAL_1_32:
-			transmissionParams |= SC_RA_RAM_OP_PARAM_GUARD_32;
-			break;
-		default:	/* Not set, detect it automatically */
-			operationMode |= SC_RA_RAM_OP_AUTO_GUARD__M;
-			/* try first guess 1/4 */
-			transmissionParams |= SC_RA_RAM_OP_PARAM_GUARD_4;
-			break;
-		}
-
-		switch (p->hierarchy) {
-		case HIERARCHY_1:
-			transmissionParams |= SC_RA_RAM_OP_PARAM_HIER_A1;
-			if (state->type_A) {
-				status = Write16(state, EQ_REG_OT_ALPHA__A, 0x0001, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EC_SB_REG_ALPHA__A, 0x0001, 0x0000);
-				if (status < 0)
-					break;
-
-				qpskTdTpsPwr = EQ_TD_TPS_PWR_UNKNOWN;
-				qam16TdTpsPwr = EQ_TD_TPS_PWR_QAM16_ALPHA1;
-				qam64TdTpsPwr = EQ_TD_TPS_PWR_QAM64_ALPHA1;
-
-				qpskIsGainMan =
-				    SC_RA_RAM_EQ_IS_GAIN_UNKNOWN_MAN__PRE;
-				qam16IsGainMan =
-				    SC_RA_RAM_EQ_IS_GAIN_16QAM_MAN__PRE;
-				qam64IsGainMan =
-				    SC_RA_RAM_EQ_IS_GAIN_64QAM_MAN__PRE;
-
-				qpskIsGainExp =
-				    SC_RA_RAM_EQ_IS_GAIN_UNKNOWN_EXP__PRE;
-				qam16IsGainExp =
-				    SC_RA_RAM_EQ_IS_GAIN_16QAM_EXP__PRE;
-				qam64IsGainExp =
-				    SC_RA_RAM_EQ_IS_GAIN_64QAM_EXP__PRE;
-			}
-			break;
-
-		case HIERARCHY_2:
-			transmissionParams |= SC_RA_RAM_OP_PARAM_HIER_A2;
-			if (state->type_A) {
-				status = Write16(state, EQ_REG_OT_ALPHA__A, 0x0002, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EC_SB_REG_ALPHA__A, 0x0002, 0x0000);
-				if (status < 0)
-					break;
-
-				qpskTdTpsPwr = EQ_TD_TPS_PWR_UNKNOWN;
-				qam16TdTpsPwr = EQ_TD_TPS_PWR_QAM16_ALPHA2;
-				qam64TdTpsPwr = EQ_TD_TPS_PWR_QAM64_ALPHA2;
-
-				qpskIsGainMan =
-				    SC_RA_RAM_EQ_IS_GAIN_UNKNOWN_MAN__PRE;
-				qam16IsGainMan =
-				    SC_RA_RAM_EQ_IS_GAIN_16QAM_A2_MAN__PRE;
-				qam64IsGainMan =
-				    SC_RA_RAM_EQ_IS_GAIN_64QAM_A2_MAN__PRE;
-
-				qpskIsGainExp =
-				    SC_RA_RAM_EQ_IS_GAIN_UNKNOWN_EXP__PRE;
-				qam16IsGainExp =
-				    SC_RA_RAM_EQ_IS_GAIN_16QAM_A2_EXP__PRE;
-				qam64IsGainExp =
-				    SC_RA_RAM_EQ_IS_GAIN_64QAM_A2_EXP__PRE;
-			}
-			break;
-		case HIERARCHY_4:
-			transmissionParams |= SC_RA_RAM_OP_PARAM_HIER_A4;
-			if (state->type_A) {
-				status = Write16(state, EQ_REG_OT_ALPHA__A, 0x0003, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EC_SB_REG_ALPHA__A, 0x0003, 0x0000);
-				if (status < 0)
-					break;
-
-				qpskTdTpsPwr = EQ_TD_TPS_PWR_UNKNOWN;
-				qam16TdTpsPwr = EQ_TD_TPS_PWR_QAM16_ALPHA4;
-				qam64TdTpsPwr = EQ_TD_TPS_PWR_QAM64_ALPHA4;
-
-				qpskIsGainMan =
-				    SC_RA_RAM_EQ_IS_GAIN_UNKNOWN_MAN__PRE;
-				qam16IsGainMan =
-				    SC_RA_RAM_EQ_IS_GAIN_16QAM_A4_MAN__PRE;
-				qam64IsGainMan =
-				    SC_RA_RAM_EQ_IS_GAIN_64QAM_A4_MAN__PRE;
-
-				qpskIsGainExp =
-				    SC_RA_RAM_EQ_IS_GAIN_UNKNOWN_EXP__PRE;
-				qam16IsGainExp =
-				    SC_RA_RAM_EQ_IS_GAIN_16QAM_A4_EXP__PRE;
-				qam64IsGainExp =
-				    SC_RA_RAM_EQ_IS_GAIN_64QAM_A4_EXP__PRE;
-			}
-			break;
-		case HIERARCHY_AUTO:
-		default:
-			/* Not set, detect it automatically, start with none */
-			operationMode |= SC_RA_RAM_OP_AUTO_HIER__M;
-			transmissionParams |= SC_RA_RAM_OP_PARAM_HIER_NO;
-			if (state->type_A) {
-				status = Write16(state, EQ_REG_OT_ALPHA__A, 0x0000, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EC_SB_REG_ALPHA__A, 0x0000, 0x0000);
-				if (status < 0)
-					break;
-
-				qpskTdTpsPwr = EQ_TD_TPS_PWR_QPSK;
-				qam16TdTpsPwr = EQ_TD_TPS_PWR_QAM16_ALPHAN;
-				qam64TdTpsPwr = EQ_TD_TPS_PWR_QAM64_ALPHAN;
-
-				qpskIsGainMan =
-				    SC_RA_RAM_EQ_IS_GAIN_QPSK_MAN__PRE;
-				qam16IsGainMan =
-				    SC_RA_RAM_EQ_IS_GAIN_16QAM_MAN__PRE;
-				qam64IsGainMan =
-				    SC_RA_RAM_EQ_IS_GAIN_64QAM_MAN__PRE;
-
-				qpskIsGainExp =
-				    SC_RA_RAM_EQ_IS_GAIN_QPSK_EXP__PRE;
-				qam16IsGainExp =
-				    SC_RA_RAM_EQ_IS_GAIN_16QAM_EXP__PRE;
-				qam64IsGainExp =
-				    SC_RA_RAM_EQ_IS_GAIN_64QAM_EXP__PRE;
-			}
-			break;
-		}
-		status = status;
-		if (status < 0)
-			break;
-
-		switch (p->modulation) {
-		default:
-			operationMode |= SC_RA_RAM_OP_AUTO_CONST__M;
-			/* fall through , try first guess
-			   DRX_CONSTELLATION_QAM64 */
-		case QAM_64:
-			transmissionParams |= SC_RA_RAM_OP_PARAM_CONST_QAM64;
-			if (state->type_A) {
-				status = Write16(state, EQ_REG_OT_CONST__A, 0x0002, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EC_SB_REG_CONST__A, EC_SB_REG_CONST_64QAM, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EC_SB_REG_SCALE_MSB__A, 0x0020, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EC_SB_REG_SCALE_BIT2__A, 0x0008, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EC_SB_REG_SCALE_LSB__A, 0x0002, 0x0000);
-				if (status < 0)
-					break;
-
-				status = Write16(state, EQ_REG_TD_TPS_PWR_OFS__A, qam64TdTpsPwr, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EQ_REG_SN_CEGAIN__A, qam64SnCeGain, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EQ_REG_IS_GAIN_MAN__A, qam64IsGainMan, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EQ_REG_IS_GAIN_EXP__A, qam64IsGainExp, 0x0000);
-				if (status < 0)
-					break;
-			}
-			break;
-		case QPSK:
-			transmissionParams |= SC_RA_RAM_OP_PARAM_CONST_QPSK;
-			if (state->type_A) {
-				status = Write16(state, EQ_REG_OT_CONST__A, 0x0000, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EC_SB_REG_CONST__A, EC_SB_REG_CONST_QPSK, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EC_SB_REG_SCALE_MSB__A, 0x0010, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EC_SB_REG_SCALE_BIT2__A, 0x0000, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EC_SB_REG_SCALE_LSB__A, 0x0000, 0x0000);
-				if (status < 0)
-					break;
-
-				status = Write16(state, EQ_REG_TD_TPS_PWR_OFS__A, qpskTdTpsPwr, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EQ_REG_SN_CEGAIN__A, qpskSnCeGain, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EQ_REG_IS_GAIN_MAN__A, qpskIsGainMan, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EQ_REG_IS_GAIN_EXP__A, qpskIsGainExp, 0x0000);
-				if (status < 0)
-					break;
-			}
-			break;
-
-		case QAM_16:
-			transmissionParams |= SC_RA_RAM_OP_PARAM_CONST_QAM16;
-			if (state->type_A) {
-				status = Write16(state, EQ_REG_OT_CONST__A, 0x0001, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EC_SB_REG_CONST__A, EC_SB_REG_CONST_16QAM, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EC_SB_REG_SCALE_MSB__A, 0x0010, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EC_SB_REG_SCALE_BIT2__A, 0x0004, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EC_SB_REG_SCALE_LSB__A, 0x0000, 0x0000);
-				if (status < 0)
-					break;
-
-				status = Write16(state, EQ_REG_TD_TPS_PWR_OFS__A, qam16TdTpsPwr, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EQ_REG_SN_CEGAIN__A, qam16SnCeGain, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EQ_REG_IS_GAIN_MAN__A, qam16IsGainMan, 0x0000);
-				if (status < 0)
-					break;
-				status = Write16(state, EQ_REG_IS_GAIN_EXP__A, qam16IsGainExp, 0x0000);
-				if (status < 0)
-					break;
-			}
-			break;
-
-		}
-		status = status;
-		if (status < 0)
-			break;
-
-		switch (DRX_CHANNEL_HIGH) {
-		default:
-		case DRX_CHANNEL_AUTO:
-		case DRX_CHANNEL_LOW:
-			transmissionParams |= SC_RA_RAM_OP_PARAM_PRIO_LO;
-			status = Write16(state, EC_SB_REG_PRIOR__A, EC_SB_REG_PRIOR_LO, 0x0000);
-			if (status < 0)
-				break;
-			break;
-		case DRX_CHANNEL_HIGH:
-			transmissionParams |= SC_RA_RAM_OP_PARAM_PRIO_HI;
-			status = Write16(state, EC_SB_REG_PRIOR__A, EC_SB_REG_PRIOR_HI, 0x0000);
-			if (status < 0)
-				break;
-			break;
-
-		}
-
-		switch (p->code_rate_HP) {
-		case FEC_1_2:
-			transmissionParams |= SC_RA_RAM_OP_PARAM_RATE_1_2;
-			if (state->type_A) {
-				status = Write16(state, EC_VD_REG_SET_CODERATE__A, EC_VD_REG_SET_CODERATE_C1_2, 0x0000);
-				if (status < 0)
-					break;
-			}
-			break;
-		default:
-			operationMode |= SC_RA_RAM_OP_AUTO_RATE__M;
-		case FEC_2_3:
-			transmissionParams |= SC_RA_RAM_OP_PARAM_RATE_2_3;
-			if (state->type_A) {
-				status = Write16(state, EC_VD_REG_SET_CODERATE__A, EC_VD_REG_SET_CODERATE_C2_3, 0x0000);
-				if (status < 0)
-					break;
-			}
-			break;
-		case FEC_3_4:
-			transmissionParams |= SC_RA_RAM_OP_PARAM_RATE_3_4;
-			if (state->type_A) {
-				status = Write16(state, EC_VD_REG_SET_CODERATE__A, EC_VD_REG_SET_CODERATE_C3_4, 0x0000);
-				if (status < 0)
-					break;
-			}
-			break;
-		case FEC_5_6:
-			transmissionParams |= SC_RA_RAM_OP_PARAM_RATE_5_6;
-			if (state->type_A) {
-				status = Write16(state, EC_VD_REG_SET_CODERATE__A, EC_VD_REG_SET_CODERATE_C5_6, 0x0000);
-				if (status < 0)
-					break;
-			}
-			break;
-		case FEC_7_8:
-			transmissionParams |= SC_RA_RAM_OP_PARAM_RATE_7_8;
-			if (state->type_A) {
-				status = Write16(state, EC_VD_REG_SET_CODERATE__A, EC_VD_REG_SET_CODERATE_C7_8, 0x0000);
-				if (status < 0)
-					break;
-			}
-			break;
-		}
-		status = status;
-		if (status < 0)
-			break;
-
-		/* First determine real bandwidth (Hz) */
-		/* Also set delay for impulse noise cruncher (only A2) */
-		/* Also set parameters for EC_OC fix, note
-		   EC_OC_REG_TMD_HIL_MAR is changed
-		   by SC for fix for some 8K,1/8 guard but is restored by
-		   InitEC and ResetEC
-		   functions */
-		switch (p->bandwidth_hz) {
-		case 0:
-			p->bandwidth_hz = 8000000;
-			/* fall through */
-		case 8000000:
-			/* (64/7)*(8/8)*1000000 */
-			bandwidth = DRXD_BANDWIDTH_8MHZ_IN_HZ;
-
-			bandwidthParam = 0;
-			status = Write16(state,
-					 FE_AG_REG_IND_DEL__A, 50, 0x0000);
-			break;
-		case 7000000:
-			/* (64/7)*(7/8)*1000000 */
-			bandwidth = DRXD_BANDWIDTH_7MHZ_IN_HZ;
-			bandwidthParam = 0x4807;	/*binary:0100 1000 0000 0111 */
-			status = Write16(state,
-					 FE_AG_REG_IND_DEL__A, 59, 0x0000);
-			break;
-		case 6000000:
-			/* (64/7)*(6/8)*1000000 */
-			bandwidth = DRXD_BANDWIDTH_6MHZ_IN_HZ;
-			bandwidthParam = 0x0F07;	/*binary: 0000 1111 0000 0111 */
-			status = Write16(state,
-					 FE_AG_REG_IND_DEL__A, 71, 0x0000);
-			break;
-		default:
-			status = -EINVAL;
-		}
-		if (status < 0)
-			break;
-
-		status = Write16(state, SC_RA_RAM_BAND__A, bandwidthParam, 0x0000);
-		if (status < 0)
-			break;
-
-		{
-			u16 sc_config;
-			status = Read16(state, SC_RA_RAM_CONFIG__A, &sc_config, 0);
-			if (status < 0)
-				break;
-
-			/* enable SLAVE mode in 2k 1/32 to
-			   prevent timing change glitches */
-			if ((p->transmission_mode == TRANSMISSION_MODE_2K) &&
-			    (p->guard_interval == GUARD_INTERVAL_1_32)) {
-				/* enable slave */
-				sc_config |= SC_RA_RAM_CONFIG_SLAVE__M;
-			} else {
-				/* disable slave */
-				sc_config &= ~SC_RA_RAM_CONFIG_SLAVE__M;
-			}
-			status = Write16(state, SC_RA_RAM_CONFIG__A, sc_config, 0);
-			if (status < 0)
-				break;
-		}
-
-		status = SetCfgNoiseCalibration(state, &state->noise_cal);
-		if (status < 0)
-			break;
-
-		if (state->cscd_state == CSCD_INIT) {
-			/* switch on SRMM scan in SC */
-			status = Write16(state, SC_RA_RAM_SAMPLE_RATE_COUNT__A, DRXD_OSCDEV_DO_SCAN, 0x0000);
-			if (status < 0)
-				break;
-/*            CHK_ERROR(Write16(SC_RA_RAM_SAMPLE_RATE_STEP__A, DRXD_OSCDEV_STEP, 0x0000));*/
-			state->cscd_state = CSCD_SET;
-		}
-
-		/* Now compute FE_IF_REG_INCR */
-		/*((( SysFreq/BandWidth)/2)/2) -1) * 2^23) =>
-		   ((SysFreq / BandWidth) * (2^21) ) - (2^23) */
-		feIfIncr = MulDiv32(state->sys_clock_freq * 1000,
-				    (1ULL << 21), bandwidth) - (1 << 23);
-		status = Write16(state, FE_IF_REG_INCR0__A, (u16) (feIfIncr & FE_IF_REG_INCR0__M), 0x0000);
-		if (status < 0)
-			break;
-		status = Write16(state, FE_IF_REG_INCR1__A, (u16) ((feIfIncr >> FE_IF_REG_INCR0__W) & FE_IF_REG_INCR1__M), 0x0000);
-		if (status < 0)
-			break;
-		/* Bandwidth setting done */
-
-		/* Mirror & frequency offset */
-		SetFrequencyShift(state, off, mirrorFreqSpect);
-
-		/* Start SC, write channel settings to SC */
-
-		/* Enable SC after setting all other parameters */
-		status = Write16(state, SC_COMM_STATE__A, 0, 0x0000);
-		if (status < 0)
-			break;
-		status = Write16(state, SC_COMM_EXEC__A, 1, 0x0000);
-		if (status < 0)
-			break;
-
-		/* Write SC parameter registers, operation mode */
-#if 1
-		operationMode = (SC_RA_RAM_OP_AUTO_MODE__M |
-				 SC_RA_RAM_OP_AUTO_GUARD__M |
-				 SC_RA_RAM_OP_AUTO_CONST__M |
-				 SC_RA_RAM_OP_AUTO_HIER__M |
-				 SC_RA_RAM_OP_AUTO_RATE__M);
-#endif
-		status = SC_SetPrefParamCommand(state, 0x0000, transmissionParams, operationMode);
-		if (status < 0)
-			break;
-
-		/* Start correct processes to get in lock */
-		status = SC_ProcStartCommand(state, SC_RA_RAM_PROC_LOCKTRACK, SC_RA_RAM_SW_EVENT_RUN_NMASK__M, SC_RA_RAM_LOCKTRACK_MIN);
-		if (status < 0)
-			break;
-
-		status = StartOC(state);
-		if (status < 0)
-			break;
-
-		if (state->operation_mode != OM_Default) {
-			status = StartDiversity(state);
-			if (status < 0)
-				break;
-		}
-
-		state->drxd_state = DRXD_STARTED;
-	} while (0);
-
-	return status;
-}
-
-static int CDRXD(struct drxd_state *state, u32 IntermediateFrequency)
-{
-	u32 ulRfAgcOutputLevel = 0xffffffff;
-	u32 ulRfAgcSettleLevel = 528;	/* Optimum value for MT2060 */
-	u32 ulRfAgcMinLevel = 0;	/* Currently unused */
-	u32 ulRfAgcMaxLevel = DRXD_FE_CTRL_MAX;	/* Currently unused */
-	u32 ulRfAgcSpeed = 0;	/* Currently unused */
-	u32 ulRfAgcMode = 0;	/*2;   Off */
-	u32 ulRfAgcR1 = 820;
-	u32 ulRfAgcR2 = 2200;
-	u32 ulRfAgcR3 = 150;
-	u32 ulIfAgcMode = 0;	/* Auto */
-	u32 ulIfAgcOutputLevel = 0xffffffff;
-	u32 ulIfAgcSettleLevel = 0xffffffff;
-	u32 ulIfAgcMinLevel = 0xffffffff;
-	u32 ulIfAgcMaxLevel = 0xffffffff;
-	u32 ulIfAgcSpeed = 0xffffffff;
-	u32 ulIfAgcR1 = 820;
-	u32 ulIfAgcR2 = 2200;
-	u32 ulIfAgcR3 = 150;
-	u32 ulClock = state->config.clock;
-	u32 ulSerialMode = 0;
-	u32 ulEcOcRegOcModeLop = 4;	/* Dynamic DTO source */
-	u32 ulHiI2cDelay = HI_I2C_DELAY;
-	u32 ulHiI2cBridgeDelay = HI_I2C_BRIDGE_DELAY;
-	u32 ulHiI2cPatch = 0;
-	u32 ulEnvironment = APPENV_PORTABLE;
-	u32 ulEnvironmentDiversity = APPENV_MOBILE;
-	u32 ulIFFilter = IFFILTER_SAW;
-
-	state->if_agc_cfg.ctrlMode = AGC_CTRL_AUTO;
-	state->if_agc_cfg.outputLevel = 0;
-	state->if_agc_cfg.settleLevel = 140;
-	state->if_agc_cfg.minOutputLevel = 0;
-	state->if_agc_cfg.maxOutputLevel = 1023;
-	state->if_agc_cfg.speed = 904;
-
-	if (ulIfAgcMode == 1 && ulIfAgcOutputLevel <= DRXD_FE_CTRL_MAX) {
-		state->if_agc_cfg.ctrlMode = AGC_CTRL_USER;
-		state->if_agc_cfg.outputLevel = (u16) (ulIfAgcOutputLevel);
-	}
-
-	if (ulIfAgcMode == 0 &&
-	    ulIfAgcSettleLevel <= DRXD_FE_CTRL_MAX &&
-	    ulIfAgcMinLevel <= DRXD_FE_CTRL_MAX &&
-	    ulIfAgcMaxLevel <= DRXD_FE_CTRL_MAX &&
-	    ulIfAgcSpeed <= DRXD_FE_CTRL_MAX) {
-		state->if_agc_cfg.ctrlMode = AGC_CTRL_AUTO;
-		state->if_agc_cfg.settleLevel = (u16) (ulIfAgcSettleLevel);
-		state->if_agc_cfg.minOutputLevel = (u16) (ulIfAgcMinLevel);
-		state->if_agc_cfg.maxOutputLevel = (u16) (ulIfAgcMaxLevel);
-		state->if_agc_cfg.speed = (u16) (ulIfAgcSpeed);
-	}
-
-	state->if_agc_cfg.R1 = (u16) (ulIfAgcR1);
-	state->if_agc_cfg.R2 = (u16) (ulIfAgcR2);
-	state->if_agc_cfg.R3 = (u16) (ulIfAgcR3);
-
-	state->rf_agc_cfg.R1 = (u16) (ulRfAgcR1);
-	state->rf_agc_cfg.R2 = (u16) (ulRfAgcR2);
-	state->rf_agc_cfg.R3 = (u16) (ulRfAgcR3);
-
-	state->rf_agc_cfg.ctrlMode = AGC_CTRL_AUTO;
-	/* rest of the RFAgcCfg structure currently unused */
-	if (ulRfAgcMode == 1 && ulRfAgcOutputLevel <= DRXD_FE_CTRL_MAX) {
-		state->rf_agc_cfg.ctrlMode = AGC_CTRL_USER;
-		state->rf_agc_cfg.outputLevel = (u16) (ulRfAgcOutputLevel);
-	}
-
-	if (ulRfAgcMode == 0 &&
-	    ulRfAgcSettleLevel <= DRXD_FE_CTRL_MAX &&
-	    ulRfAgcMinLevel <= DRXD_FE_CTRL_MAX &&
-	    ulRfAgcMaxLevel <= DRXD_FE_CTRL_MAX &&
-	    ulRfAgcSpeed <= DRXD_FE_CTRL_MAX) {
-		state->rf_agc_cfg.ctrlMode = AGC_CTRL_AUTO;
-		state->rf_agc_cfg.settleLevel = (u16) (ulRfAgcSettleLevel);
-		state->rf_agc_cfg.minOutputLevel = (u16) (ulRfAgcMinLevel);
-		state->rf_agc_cfg.maxOutputLevel = (u16) (ulRfAgcMaxLevel);
-		state->rf_agc_cfg.speed = (u16) (ulRfAgcSpeed);
-	}
-
-	if (ulRfAgcMode == 2)
-		state->rf_agc_cfg.ctrlMode = AGC_CTRL_OFF;
-
-	if (ulEnvironment <= 2)
-		state->app_env_default = (enum app_env)
-		    (ulEnvironment);
-	if (ulEnvironmentDiversity <= 2)
-		state->app_env_diversity = (enum app_env)
-		    (ulEnvironmentDiversity);
-
-	if (ulIFFilter == IFFILTER_DISCRETE) {
-		/* discrete filter */
-		state->noise_cal.cpOpt = 0;
-		state->noise_cal.cpNexpOfs = 40;
-		state->noise_cal.tdCal2k = -40;
-		state->noise_cal.tdCal8k = -24;
-	} else {
-		/* SAW filter */
-		state->noise_cal.cpOpt = 1;
-		state->noise_cal.cpNexpOfs = 0;
-		state->noise_cal.tdCal2k = -21;
-		state->noise_cal.tdCal8k = -24;
-	}
-	state->m_EcOcRegOcModeLop = (u16) (ulEcOcRegOcModeLop);
-
-	state->chip_adr = (state->config.demod_address << 1) | 1;
-	switch (ulHiI2cPatch) {
-	case 1:
-		state->m_HiI2cPatch = DRXD_HiI2cPatch_1;
-		break;
-	case 3:
-		state->m_HiI2cPatch = DRXD_HiI2cPatch_3;
-		break;
-	default:
-		state->m_HiI2cPatch = NULL;
-	}
-
-	/* modify tuner and clock attributes */
-	state->intermediate_freq = (u16) (IntermediateFrequency / 1000);
-	/* expected system clock frequency in kHz */
-	state->expected_sys_clock_freq = 48000;
-	/* real system clock frequency in kHz */
-	state->sys_clock_freq = 48000;
-	state->osc_clock_freq = (u16) ulClock;
-	state->osc_clock_deviation = 0;
-	state->cscd_state = CSCD_INIT;
-	state->drxd_state = DRXD_UNINITIALIZED;
-
-	state->PGA = 0;
-	state->type_A = 0;
-	state->tuner_mirrors = 0;
-
-	/* modify MPEG output attributes */
-	state->insert_rs_byte = state->config.insert_rs_byte;
-	state->enable_parallel = (ulSerialMode != 1);
-
-	/* Timing div, 250ns/Psys */
-	/* Timing div, = ( delay (nano seconds) * sysclk (kHz) )/ 1000 */
-
-	state->hi_cfg_timing_div = (u16) ((state->sys_clock_freq / 1000) *
-					  ulHiI2cDelay) / 1000;
-	/* Bridge delay, uses oscilator clock */
-	/* Delay = ( delay (nano seconds) * oscclk (kHz) )/ 1000 */
-	state->hi_cfg_bridge_delay = (u16) ((state->osc_clock_freq / 1000) *
-					    ulHiI2cBridgeDelay) / 1000;
-
-	state->m_FeAgRegAgPwd = DRXD_DEF_AG_PWD_CONSUMER;
-	/* state->m_FeAgRegAgPwd = DRXD_DEF_AG_PWD_PRO; */
-	state->m_FeAgRegAgAgcSio = DRXD_DEF_AG_AGC_SIO;
-	return 0;
-}
-
-int DRXD_init(struct drxd_state *state, const u8 * fw, u32 fw_size)
-{
-	int status = 0;
-	u32 driverVersion;
-
-	if (state->init_done)
-		return 0;
-
-	CDRXD(state, state->config.IF ? state->config.IF : 36000000);
-
-	do {
-		state->operation_mode = OM_Default;
-
-		status = SetDeviceTypeId(state);
-		if (status < 0)
-			break;
-
-		/* Apply I2c address patch to B1 */
-		if (!state->type_A && state->m_HiI2cPatch != NULL)
-			status = WriteTable(state, state->m_HiI2cPatch);
-			if (status < 0)
-				break;
-
-		if (state->type_A) {
-			/* HI firmware patch for UIO readout,
-			   avoid clearing of result register */
-			status = Write16(state, 0x43012D, 0x047f, 0);
-			if (status < 0)
-				break;
-		}
-
-		status = HI_ResetCommand(state);
-		if (status < 0)
-			break;
-
-		status = StopAllProcessors(state);
-		if (status < 0)
-			break;
-		status = InitCC(state);
-		if (status < 0)
-			break;
-
-		state->osc_clock_deviation = 0;
-
-		if (state->config.osc_deviation)
-			state->osc_clock_deviation =
-			    state->config.osc_deviation(state->priv, 0, 0);
-		{
-			/* Handle clock deviation */
-			s32 devB;
-			s32 devA = (s32) (state->osc_clock_deviation) *
-			    (s32) (state->expected_sys_clock_freq);
-			/* deviation in kHz */
-			s32 deviation = (devA / (1000000L));
-			/* rounding, signed */
-			if (devA > 0)
-				devB = (2);
-			else
-				devB = (-2);
-			if ((devB * (devA % 1000000L) > 1000000L)) {
-				/* add +1 or -1 */
-				deviation += (devB / 2);
-			}
-
-			state->sys_clock_freq =
-			    (u16) ((state->expected_sys_clock_freq) +
-				   deviation);
-		}
-		status = InitHI(state);
-		if (status < 0)
-			break;
-		status = InitAtomicRead(state);
-		if (status < 0)
-			break;
-
-		status = EnableAndResetMB(state);
-		if (status < 0)
-			break;
-		if (state->type_A)
-			status = ResetCEFR(state);
-			if (status < 0)
-				break;
-
-		if (fw) {
-			status = DownloadMicrocode(state, fw, fw_size);
-			if (status < 0)
-				break;
-		} else {
-			status = DownloadMicrocode(state, state->microcode, state->microcode_length);
-			if (status < 0)
-				break;
-		}
-
-		if (state->PGA) {
-			state->m_FeAgRegAgPwd = DRXD_DEF_AG_PWD_PRO;
-			SetCfgPga(state, 0);	/* PGA = 0 dB */
-		} else {
-			state->m_FeAgRegAgPwd = DRXD_DEF_AG_PWD_CONSUMER;
-		}
-
-		state->m_FeAgRegAgAgcSio = DRXD_DEF_AG_AGC_SIO;
-
-		status = InitFE(state);
-		if (status < 0)
-			break;
-		status = InitFT(state);
-		if (status < 0)
-			break;
-		status = InitCP(state);
-		if (status < 0)
-			break;
-		status = InitCE(state);
-		if (status < 0)
-			break;
-		status = InitEQ(state);
-		if (status < 0)
-			break;
-		status = InitEC(state);
-		if (status < 0)
-			break;
-		status = InitSC(state);
-		if (status < 0)
-			break;
-
-		status = SetCfgIfAgc(state, &state->if_agc_cfg);
-		if (status < 0)
-			break;
-		status = SetCfgRfAgc(state, &state->rf_agc_cfg);
-		if (status < 0)
-			break;
-
-		state->cscd_state = CSCD_INIT;
-		status = Write16(state, SC_COMM_EXEC__A, SC_COMM_EXEC_CTL_STOP, 0);
-		if (status < 0)
-			break;
-		status = Write16(state, LC_COMM_EXEC__A, SC_COMM_EXEC_CTL_STOP, 0);
-		if (status < 0)
-			break;
-
-		driverVersion = (((VERSION_MAJOR / 10) << 4) +
-				 (VERSION_MAJOR % 10)) << 24;
-		driverVersion += (((VERSION_MINOR / 10) << 4) +
-				  (VERSION_MINOR % 10)) << 16;
-		driverVersion += ((VERSION_PATCH / 1000) << 12) +
-		    ((VERSION_PATCH / 100) << 8) +
-		    ((VERSION_PATCH / 10) << 4) + (VERSION_PATCH % 10);
-
-		status = Write32(state, SC_RA_RAM_DRIVER_VERSION__AX, driverVersion, 0);
-		if (status < 0)
-			break;
-
-		status = StopOC(state);
-		if (status < 0)
-			break;
-
-		state->drxd_state = DRXD_STOPPED;
-		state->init_done = 1;
-		status = 0;
-	} while (0);
-	return status;
-}
-
-int DRXD_status(struct drxd_state *state, u32 * pLockStatus)
-{
-	DRX_GetLockStatus(state, pLockStatus);
-
-	/*if (*pLockStatus&DRX_LOCK_MPEG) */
-	if (*pLockStatus & DRX_LOCK_FEC) {
-		ConfigureMPEGOutput(state, 1);
-		/* Get status again, in case we have MPEG lock now */
-		/*DRX_GetLockStatus(state, pLockStatus); */
-	}
-
-	return 0;
-}
-
-/****************************************************************************/
-/****************************************************************************/
-/****************************************************************************/
-
-static int drxd_read_signal_strength(struct dvb_frontend *fe, u16 * strength)
-{
-	struct drxd_state *state = fe->demodulator_priv;
-	u32 value;
-	int res;
-
-	res = ReadIFAgc(state, &value);
-	if (res < 0)
-		*strength = 0;
-	else
-		*strength = 0xffff - (value << 4);
-	return 0;
-}
-
-static int drxd_read_status(struct dvb_frontend *fe, fe_status_t * status)
-{
-	struct drxd_state *state = fe->demodulator_priv;
-	u32 lock;
-
-	DRXD_status(state, &lock);
-	*status = 0;
-	/* No MPEG lock in V255 firmware, bug ? */
-#if 1
-	if (lock & DRX_LOCK_MPEG)
-		*status |= FE_HAS_LOCK;
-#else
-	if (lock & DRX_LOCK_FEC)
-		*status |= FE_HAS_LOCK;
-#endif
-	if (lock & DRX_LOCK_FEC)
-		*status |= FE_HAS_VITERBI | FE_HAS_SYNC;
-	if (lock & DRX_LOCK_DEMOD)
-		*status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
-
-	return 0;
-}
-
-static int drxd_init(struct dvb_frontend *fe)
-{
-	struct drxd_state *state = fe->demodulator_priv;
-	int err = 0;
-
-/*	if (request_firmware(&state->fw, "drxd.fw", state->dev)<0) */
-	return DRXD_init(state, 0, 0);
-
-	err = DRXD_init(state, state->fw->data, state->fw->size);
-	release_firmware(state->fw);
-	return err;
-}
-
-int drxd_config_i2c(struct dvb_frontend *fe, int onoff)
-{
-	struct drxd_state *state = fe->demodulator_priv;
-
-	if (state->config.disable_i2c_gate_ctrl == 1)
-		return 0;
-
-	return DRX_ConfigureI2CBridge(state, onoff);
-}
-EXPORT_SYMBOL(drxd_config_i2c);
-
-static int drxd_get_tune_settings(struct dvb_frontend *fe,
-				  struct dvb_frontend_tune_settings *sets)
-{
-	sets->min_delay_ms = 10000;
-	sets->max_drift = 0;
-	sets->step_size = 0;
-	return 0;
-}
-
-static int drxd_read_ber(struct dvb_frontend *fe, u32 * ber)
-{
-	*ber = 0;
-	return 0;
-}
-
-static int drxd_read_snr(struct dvb_frontend *fe, u16 * snr)
-{
-	*snr = 0;
-	return 0;
-}
-
-static int drxd_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks)
-{
-	*ucblocks = 0;
-	return 0;
-}
-
-static int drxd_sleep(struct dvb_frontend *fe)
-{
-	struct drxd_state *state = fe->demodulator_priv;
-
-	ConfigureMPEGOutput(state, 0);
-	return 0;
-}
-
-static int drxd_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	return drxd_config_i2c(fe, enable);
-}
-
-static int drxd_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct drxd_state *state = fe->demodulator_priv;
-	s32 off = 0;
-
-	state->props = *p;
-	DRX_Stop(state);
-
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	msleep(200);
-
-	return DRX_Start(state, off);
-}
-
-static void drxd_release(struct dvb_frontend *fe)
-{
-	struct drxd_state *state = fe->demodulator_priv;
-
-	kfree(state);
-}
-
-static struct dvb_frontend_ops drxd_ops = {
-	.delsys = { SYS_DVBT},
-	.info = {
-		 .name = "Micronas DRXD DVB-T",
-		 .frequency_min = 47125000,
-		 .frequency_max = 855250000,
-		 .frequency_stepsize = 166667,
-		 .frequency_tolerance = 0,
-		 .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
-		 FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
-		 FE_CAN_FEC_AUTO |
-		 FE_CAN_QAM_16 | FE_CAN_QAM_64 |
-		 FE_CAN_QAM_AUTO |
-		 FE_CAN_TRANSMISSION_MODE_AUTO |
-		 FE_CAN_GUARD_INTERVAL_AUTO |
-		 FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER | FE_CAN_MUTE_TS},
-
-	.release = drxd_release,
-	.init = drxd_init,
-	.sleep = drxd_sleep,
-	.i2c_gate_ctrl = drxd_i2c_gate_ctrl,
-
-	.set_frontend = drxd_set_frontend,
-	.get_tune_settings = drxd_get_tune_settings,
-
-	.read_status = drxd_read_status,
-	.read_ber = drxd_read_ber,
-	.read_signal_strength = drxd_read_signal_strength,
-	.read_snr = drxd_read_snr,
-	.read_ucblocks = drxd_read_ucblocks,
-};
-
-struct dvb_frontend *drxd_attach(const struct drxd_config *config,
-				 void *priv, struct i2c_adapter *i2c,
-				 struct device *dev)
-{
-	struct drxd_state *state = NULL;
-
-	state = kmalloc(sizeof(struct drxd_state), GFP_KERNEL);
-	if (!state)
-		return NULL;
-	memset(state, 0, sizeof(*state));
-
-	memcpy(&state->ops, &drxd_ops, sizeof(struct dvb_frontend_ops));
-	state->dev = dev;
-	state->config = *config;
-	state->i2c = i2c;
-	state->priv = priv;
-
-	mutex_init(&state->mutex);
-
-	if (Read16(state, 0, 0, 0) < 0)
-		goto error;
-
-	memcpy(&state->frontend.ops, &drxd_ops,
-	       sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	ConfigureMPEGOutput(state, 0);
-	return &state->frontend;
-
-error:
-	printk(KERN_ERR "drxd: not found\n");
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(drxd_attach);
-
-MODULE_DESCRIPTION("DRXD driver");
-MODULE_AUTHOR("Micronas");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/drxd_map_firm.h b/drivers/media/dvb/frontends/drxd_map_firm.h
deleted file mode 100644
index 6bc553a..0000000
--- a/drivers/media/dvb/frontends/drxd_map_firm.h
+++ /dev/null
@@ -1,1013 +0,0 @@
-/*
- * drx3973d_map_firm.h
- *
- * Copyright (C) 2006-2007 Micronas
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 only, as published by the Free Software Foundation.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __DRX3973D_MAP__H__
-#define __DRX3973D_MAP__H__
-
-/*
- * Note: originally, this file contained 12000+ lines of data
- * Probably a few lines for every firwmare assembler instruction. However,
- * only a few defines were actually used. So, removed all uneeded lines.
- * If ever needed, the other lines can be easily obtained via git history.
- */
-
-#define HI_COMM_EXEC__A                                              0x400000
-#define HI_COMM_MB__A                                                0x400002
-#define HI_CT_REG_COMM_STATE__A                                      0x410001
-#define HI_RA_RAM_SRV_RES__A                                         0x420031
-#define HI_RA_RAM_SRV_CMD__A                                         0x420032
-#define   HI_RA_RAM_SRV_CMD_RESET                                    0x2
-#define   HI_RA_RAM_SRV_CMD_CONFIG                                   0x3
-#define   HI_RA_RAM_SRV_CMD_EXECUTE                                  0x6
-#define HI_RA_RAM_SRV_RST_KEY__A                                     0x420033
-#define   HI_RA_RAM_SRV_RST_KEY_ACT                                  0x3973
-#define HI_RA_RAM_SRV_CFG_KEY__A                                     0x420033
-#define HI_RA_RAM_SRV_CFG_DIV__A                                     0x420034
-#define HI_RA_RAM_SRV_CFG_BDL__A                                     0x420035
-#define HI_RA_RAM_SRV_CFG_WUP__A                                     0x420036
-#define HI_RA_RAM_SRV_CFG_ACT__A                                     0x420037
-#define     HI_RA_RAM_SRV_CFG_ACT_SLV0_ON                            0x1
-#define   HI_RA_RAM_SRV_CFG_ACT_BRD__M                               0x4
-#define     HI_RA_RAM_SRV_CFG_ACT_BRD_OFF                            0x0
-#define     HI_RA_RAM_SRV_CFG_ACT_BRD_ON                             0x4
-#define     HI_RA_RAM_SRV_CFG_ACT_PWD_EXE                            0x8
-#define HI_RA_RAM_USR_BEGIN__A                                       0x420040
-#define HI_IF_RAM_TRP_BPT0__AX                                       0x430000
-#define HI_IF_RAM_USR_BEGIN__A                                       0x430200
-#define SC_COMM_EXEC__A                                              0x800000
-#define     SC_COMM_EXEC_CTL_STOP                                    0x0
-#define SC_COMM_STATE__A                                             0x800001
-#define SC_RA_RAM_PARAM0__A                                          0x820040
-#define SC_RA_RAM_PARAM1__A                                          0x820041
-#define SC_RA_RAM_CMD_ADDR__A                                        0x820042
-#define SC_RA_RAM_CMD__A                                             0x820043
-#define   SC_RA_RAM_CMD_PROC_START                                   0x1
-#define   SC_RA_RAM_CMD_SET_PREF_PARAM                               0x3
-#define   SC_RA_RAM_CMD_GET_OP_PARAM                                 0x5
-#define   SC_RA_RAM_SW_EVENT_RUN_NMASK__M                            0x1
-#define   SC_RA_RAM_LOCKTRACK_MIN                                    0x1
-#define     SC_RA_RAM_OP_PARAM_MODE_2K                               0x0
-#define     SC_RA_RAM_OP_PARAM_MODE_8K                               0x1
-#define     SC_RA_RAM_OP_PARAM_GUARD_32                              0x0
-#define     SC_RA_RAM_OP_PARAM_GUARD_16                              0x4
-#define     SC_RA_RAM_OP_PARAM_GUARD_8                               0x8
-#define     SC_RA_RAM_OP_PARAM_GUARD_4                               0xC
-#define     SC_RA_RAM_OP_PARAM_CONST_QPSK                            0x0
-#define     SC_RA_RAM_OP_PARAM_CONST_QAM16                           0x10
-#define     SC_RA_RAM_OP_PARAM_CONST_QAM64                           0x20
-#define     SC_RA_RAM_OP_PARAM_HIER_NO                               0x0
-#define     SC_RA_RAM_OP_PARAM_HIER_A1                               0x40
-#define     SC_RA_RAM_OP_PARAM_HIER_A2                               0x80
-#define     SC_RA_RAM_OP_PARAM_HIER_A4                               0xC0
-#define     SC_RA_RAM_OP_PARAM_RATE_1_2                              0x0
-#define     SC_RA_RAM_OP_PARAM_RATE_2_3                              0x200
-#define     SC_RA_RAM_OP_PARAM_RATE_3_4                              0x400
-#define     SC_RA_RAM_OP_PARAM_RATE_5_6                              0x600
-#define     SC_RA_RAM_OP_PARAM_RATE_7_8                              0x800
-#define     SC_RA_RAM_OP_PARAM_PRIO_HI                               0x0
-#define     SC_RA_RAM_OP_PARAM_PRIO_LO                               0x1000
-#define   SC_RA_RAM_OP_AUTO_MODE__M                                  0x1
-#define   SC_RA_RAM_OP_AUTO_GUARD__M                                 0x2
-#define   SC_RA_RAM_OP_AUTO_CONST__M                                 0x4
-#define   SC_RA_RAM_OP_AUTO_HIER__M                                  0x8
-#define   SC_RA_RAM_OP_AUTO_RATE__M                                  0x10
-#define SC_RA_RAM_LOCK__A                                            0x82004B
-#define   SC_RA_RAM_LOCK_DEMOD__M                                    0x1
-#define   SC_RA_RAM_LOCK_FEC__M                                      0x2
-#define   SC_RA_RAM_LOCK_MPEG__M                                     0x4
-#define SC_RA_RAM_BE_OPT_ENA__A                                      0x82004C
-#define   SC_RA_RAM_BE_OPT_ENA_CP_OPT                                0x1
-#define SC_RA_RAM_BE_OPT_DELAY__A                                    0x82004D
-#define SC_RA_RAM_CONFIG__A                                          0x820050
-#define   SC_RA_RAM_CONFIG_FR_ENABLE__M                              0x4
-#define   SC_RA_RAM_CONFIG_FREQSCAN__M                               0x10
-#define   SC_RA_RAM_CONFIG_SLAVE__M                                  0x20
-#define SC_RA_RAM_IF_SAVE__AX                                        0x82008E
-#define SC_RA_RAM_IR_COARSE_2K_LENGTH__A                             0x8200D1
-#define SC_RA_RAM_IR_COARSE_2K_LENGTH__PRE                           0x9
-#define SC_RA_RAM_IR_COARSE_2K_FREQINC__A                            0x8200D2
-#define SC_RA_RAM_IR_COARSE_2K_FREQINC__PRE                          0x4
-#define SC_RA_RAM_IR_COARSE_2K_KAISINC__A                            0x8200D3
-#define SC_RA_RAM_IR_COARSE_2K_KAISINC__PRE                          0x100
-#define SC_RA_RAM_IR_COARSE_8K_LENGTH__A                             0x8200D4
-#define SC_RA_RAM_IR_COARSE_8K_LENGTH__PRE                           0x8
-#define SC_RA_RAM_IR_COARSE_8K_FREQINC__A                            0x8200D5
-#define SC_RA_RAM_IR_COARSE_8K_FREQINC__PRE                          0x8
-#define SC_RA_RAM_IR_COARSE_8K_KAISINC__A                            0x8200D6
-#define SC_RA_RAM_IR_COARSE_8K_KAISINC__PRE                          0x200
-#define SC_RA_RAM_IR_FINE_2K_LENGTH__A                               0x8200D7
-#define SC_RA_RAM_IR_FINE_2K_LENGTH__PRE                             0x9
-#define SC_RA_RAM_IR_FINE_2K_FREQINC__A                              0x8200D8
-#define SC_RA_RAM_IR_FINE_2K_FREQINC__PRE                            0x4
-#define SC_RA_RAM_IR_FINE_2K_KAISINC__A                              0x8200D9
-#define SC_RA_RAM_IR_FINE_2K_KAISINC__PRE                            0x100
-#define SC_RA_RAM_IR_FINE_8K_LENGTH__A                               0x8200DA
-#define SC_RA_RAM_IR_FINE_8K_LENGTH__PRE                             0xB
-#define SC_RA_RAM_IR_FINE_8K_FREQINC__A                              0x8200DB
-#define SC_RA_RAM_IR_FINE_8K_FREQINC__PRE                            0x1
-#define SC_RA_RAM_IR_FINE_8K_KAISINC__A                              0x8200DC
-#define SC_RA_RAM_IR_FINE_8K_KAISINC__PRE                            0x40
-#define SC_RA_RAM_ECHO_SHIFT_LIM__A                                  0x8200DD
-#define SC_RA_RAM_SAMPLE_RATE_COUNT__A                               0x8200E8
-#define SC_RA_RAM_SAMPLE_RATE_STEP__A                                0x8200E9
-#define SC_RA_RAM_BAND__A                                            0x8200EC
-#define SC_RA_RAM_LC_ABS_2K__A                                       0x8200F4
-#define SC_RA_RAM_LC_ABS_2K__PRE                                     0x1F
-#define SC_RA_RAM_LC_ABS_8K__A                                       0x8200F5
-#define SC_RA_RAM_LC_ABS_8K__PRE                                     0x1F
-#define SC_RA_RAM_EQ_IS_GAIN_UNKNOWN_MAN__PRE                        0x1D6
-#define SC_RA_RAM_EQ_IS_GAIN_UNKNOWN_EXP__PRE                        0x4
-#define SC_RA_RAM_EQ_IS_GAIN_QPSK_MAN__PRE                           0x1BB
-#define SC_RA_RAM_EQ_IS_GAIN_QPSK_EXP__PRE                           0x5
-#define SC_RA_RAM_EQ_IS_GAIN_16QAM_MAN__PRE                          0x1EF
-#define SC_RA_RAM_EQ_IS_GAIN_16QAM_EXP__PRE                          0x5
-#define SC_RA_RAM_EQ_IS_GAIN_16QAM_A2_MAN__PRE                       0x15E
-#define SC_RA_RAM_EQ_IS_GAIN_16QAM_A2_EXP__PRE                       0x5
-#define SC_RA_RAM_EQ_IS_GAIN_16QAM_A4_MAN__PRE                       0x11A
-#define SC_RA_RAM_EQ_IS_GAIN_16QAM_A4_EXP__PRE                       0x6
-#define SC_RA_RAM_EQ_IS_GAIN_64QAM_MAN__PRE                          0x1FB
-#define SC_RA_RAM_EQ_IS_GAIN_64QAM_EXP__PRE                          0x5
-#define SC_RA_RAM_EQ_IS_GAIN_64QAM_A2_MAN__PRE                       0x12F
-#define SC_RA_RAM_EQ_IS_GAIN_64QAM_A2_EXP__PRE                       0x5
-#define SC_RA_RAM_EQ_IS_GAIN_64QAM_A4_MAN__PRE                       0x197
-#define SC_RA_RAM_EQ_IS_GAIN_64QAM_A4_EXP__PRE                       0x5
-#define SC_RA_RAM_DRIVER_VERSION__AX                                 0x8201FE
-#define   SC_RA_RAM_PROC_LOCKTRACK                                   0x0
-#define FE_COMM_EXEC__A                                              0xC00000
-#define FE_AD_REG_COMM_EXEC__A                                       0xC10000
-#define FE_AD_REG_FDB_IN__A                                          0xC10012
-#define FE_AD_REG_PD__A                                              0xC10013
-#define FE_AD_REG_INVEXT__A                                          0xC10014
-#define FE_AD_REG_CLKNEG__A                                          0xC10015
-#define FE_AG_REG_COMM_EXEC__A                                       0xC20000
-#define FE_AG_REG_AG_MODE_LOP__A                                     0xC20010
-#define   FE_AG_REG_AG_MODE_LOP_MODE_4__M                            0x10
-#define     FE_AG_REG_AG_MODE_LOP_MODE_4_STATIC                      0x0
-#define     FE_AG_REG_AG_MODE_LOP_MODE_4_DYNAMIC                     0x10
-#define   FE_AG_REG_AG_MODE_LOP_MODE_5__M                            0x20
-#define     FE_AG_REG_AG_MODE_LOP_MODE_5_STATIC                      0x0
-#define   FE_AG_REG_AG_MODE_LOP_MODE_C__M                            0x1000
-#define     FE_AG_REG_AG_MODE_LOP_MODE_C_STATIC                      0x0
-#define     FE_AG_REG_AG_MODE_LOP_MODE_C_DYNAMIC                     0x1000
-#define   FE_AG_REG_AG_MODE_LOP_MODE_E__M                            0x4000
-#define     FE_AG_REG_AG_MODE_LOP_MODE_E_STATIC                      0x0
-#define     FE_AG_REG_AG_MODE_LOP_MODE_E_DYNAMIC                     0x4000
-#define FE_AG_REG_AG_MODE_HIP__A                                     0xC20011
-#define FE_AG_REG_AG_PGA_MODE__A                                     0xC20012
-#define   FE_AG_REG_AG_PGA_MODE_PFY_PCY_AFY_REN                      0x0
-#define   FE_AG_REG_AG_PGA_MODE_PFN_PCN_AFY_REN                      0x1
-#define FE_AG_REG_AG_AGC_SIO__A                                      0xC20013
-#define   FE_AG_REG_AG_AGC_SIO_AGC_SIO_2__M                          0x2
-#define     FE_AG_REG_AG_AGC_SIO_AGC_SIO_2_OUTPUT                    0x0
-#define     FE_AG_REG_AG_AGC_SIO_AGC_SIO_2_INPUT                     0x2
-#define FE_AG_REG_AG_PWD__A                                          0xC20015
-#define   FE_AG_REG_AG_PWD_PWD_PD2__M                                0x2
-#define     FE_AG_REG_AG_PWD_PWD_PD2_DISABLE                         0x0
-#define     FE_AG_REG_AG_PWD_PWD_PD2_ENABLE                          0x2
-#define FE_AG_REG_DCE_AUR_CNT__A                                     0xC20016
-#define FE_AG_REG_DCE_RUR_CNT__A                                     0xC20017
-#define FE_AG_REG_ACE_AUR_CNT__A                                     0xC2001A
-#define FE_AG_REG_ACE_RUR_CNT__A                                     0xC2001B
-#define FE_AG_REG_CDR_RUR_CNT__A                                     0xC20020
-#define FE_AG_REG_EGC_RUR_CNT__A                                     0xC20024
-#define FE_AG_REG_EGC_SET_LVL__A                                     0xC20025
-#define FE_AG_REG_EGC_SET_LVL__M                                     0x1FF
-#define FE_AG_REG_EGC_FLA_RGN__A                                     0xC20026
-#define FE_AG_REG_EGC_SLO_RGN__A                                     0xC20027
-#define FE_AG_REG_EGC_JMP_PSN__A                                     0xC20028
-#define FE_AG_REG_EGC_FLA_INC__A                                     0xC20029
-#define FE_AG_REG_EGC_FLA_DEC__A                                     0xC2002A
-#define FE_AG_REG_EGC_SLO_INC__A                                     0xC2002B
-#define FE_AG_REG_EGC_SLO_DEC__A                                     0xC2002C
-#define FE_AG_REG_EGC_FAS_INC__A                                     0xC2002D
-#define FE_AG_REG_EGC_FAS_DEC__A                                     0xC2002E
-#define FE_AG_REG_PM1_AGC_WRI__A                                     0xC20030
-#define FE_AG_REG_PM1_AGC_WRI__M                                     0x7FF
-#define FE_AG_REG_GC1_AGC_RIC__A                                     0xC20031
-#define FE_AG_REG_GC1_AGC_OFF__A                                     0xC20032
-#define FE_AG_REG_GC1_AGC_MAX__A                                     0xC20033
-#define FE_AG_REG_GC1_AGC_MIN__A                                     0xC20034
-#define FE_AG_REG_GC1_AGC_DAT__A                                     0xC20035
-#define FE_AG_REG_GC1_AGC_DAT__M                                     0x3FF
-#define FE_AG_REG_PM2_AGC_WRI__A                                     0xC20036
-#define FE_AG_REG_IND_WIN__A                                         0xC2003C
-#define FE_AG_REG_IND_THD_LOL__A                                     0xC2003D
-#define FE_AG_REG_IND_THD_HIL__A                                     0xC2003E
-#define FE_AG_REG_IND_DEL__A                                         0xC2003F
-#define FE_AG_REG_IND_PD1_WRI__A                                     0xC20040
-#define FE_AG_REG_PDA_AUR_CNT__A                                     0xC20041
-#define FE_AG_REG_PDA_RUR_CNT__A                                     0xC20042
-#define FE_AG_REG_PDA_AVE_DAT__A                                     0xC20043
-#define FE_AG_REG_PDC_RUR_CNT__A                                     0xC20044
-#define FE_AG_REG_PDC_SET_LVL__A                                     0xC20045
-#define FE_AG_REG_PDC_FLA_RGN__A                                     0xC20046
-#define FE_AG_REG_PDC_JMP_PSN__A                                     0xC20047
-#define FE_AG_REG_PDC_FLA_STP__A                                     0xC20048
-#define FE_AG_REG_PDC_SLO_STP__A                                     0xC20049
-#define FE_AG_REG_PDC_PD2_WRI__A                                     0xC2004A
-#define FE_AG_REG_PDC_MAP_DAT__A                                     0xC2004B
-#define FE_AG_REG_PDC_MAX__A                                         0xC2004C
-#define FE_AG_REG_TGA_AUR_CNT__A                                     0xC2004D
-#define FE_AG_REG_TGA_RUR_CNT__A                                     0xC2004E
-#define FE_AG_REG_TGA_AVE_DAT__A                                     0xC2004F
-#define FE_AG_REG_TGC_RUR_CNT__A                                     0xC20050
-#define FE_AG_REG_TGC_SET_LVL__A                                     0xC20051
-#define FE_AG_REG_TGC_SET_LVL__M                                     0x3F
-#define FE_AG_REG_TGC_FLA_RGN__A                                     0xC20052
-#define FE_AG_REG_TGC_JMP_PSN__A                                     0xC20053
-#define FE_AG_REG_TGC_FLA_STP__A                                     0xC20054
-#define FE_AG_REG_TGC_SLO_STP__A                                     0xC20055
-#define FE_AG_REG_TGC_MAP_DAT__A                                     0xC20056
-#define FE_AG_REG_FGA_AUR_CNT__A                                     0xC20057
-#define FE_AG_REG_FGA_RUR_CNT__A                                     0xC20058
-#define FE_AG_REG_FGM_WRI__A                                         0xC20061
-#define FE_AG_REG_BGC_FGC_WRI__A                                     0xC20068
-#define FE_AG_REG_BGC_CGC_WRI__A                                     0xC20069
-#define FE_FS_REG_COMM_EXEC__A                                       0xC30000
-#define FE_FS_REG_ADD_INC_LOP__A                                     0xC30010
-#define FE_FD_REG_COMM_EXEC__A                                       0xC40000
-#define FE_FD_REG_SCL__A                                             0xC40010
-#define FE_FD_REG_MAX_LEV__A                                         0xC40011
-#define FE_FD_REG_NR__A                                              0xC40012
-#define FE_FD_REG_MEAS_VAL__A                                        0xC40014
-#define FE_IF_REG_COMM_EXEC__A                                       0xC50000
-#define FE_IF_REG_INCR0__A                                           0xC50010
-#define FE_IF_REG_INCR0__W                                           16
-#define FE_IF_REG_INCR0__M                                           0xFFFF
-#define FE_IF_REG_INCR1__A                                           0xC50011
-#define FE_IF_REG_INCR1__M                                           0xFF
-#define FE_CF_REG_COMM_EXEC__A                                       0xC60000
-#define FE_CF_REG_SCL__A                                             0xC60010
-#define FE_CF_REG_MAX_LEV__A                                         0xC60011
-#define FE_CF_REG_NR__A                                              0xC60012
-#define FE_CF_REG_IMP_VAL__A                                         0xC60013
-#define FE_CF_REG_MEAS_VAL__A                                        0xC60014
-#define FE_CU_REG_COMM_EXEC__A                                       0xC70000
-#define FE_CU_REG_FRM_CNT_RST__A                                     0xC70011
-#define FE_CU_REG_FRM_CNT_STR__A                                     0xC70012
-#define FT_COMM_EXEC__A                                              0x1000000
-#define FT_REG_COMM_EXEC__A                                          0x1010000
-#define CP_COMM_EXEC__A                                              0x1400000
-#define CP_REG_COMM_EXEC__A                                          0x1410000
-#define CP_REG_INTERVAL__A                                           0x1410011
-#define CP_REG_BR_SPL_OFFSET__A                                      0x1410023
-#define CP_REG_BR_STR_DEL__A                                         0x1410024
-#define CP_REG_RT_ANG_INC0__A                                        0x1410030
-#define CP_REG_RT_ANG_INC1__A                                        0x1410031
-#define CP_REG_RT_DETECT_ENA__A                                      0x1410032
-#define CP_REG_RT_DETECT_TRH__A                                      0x1410033
-#define CP_REG_RT_EXP_MARG__A                                        0x141003E
-#define CP_REG_AC_NEXP_OFFS__A                                       0x1410040
-#define CP_REG_AC_AVER_POW__A                                        0x1410041
-#define CP_REG_AC_MAX_POW__A                                         0x1410042
-#define CP_REG_AC_WEIGHT_MAN__A                                      0x1410043
-#define CP_REG_AC_WEIGHT_EXP__A                                      0x1410044
-#define CP_REG_AC_AMP_MODE__A                                        0x1410047
-#define CP_REG_AC_AMP_FIX__A                                         0x1410048
-#define CP_REG_AC_ANG_MODE__A                                        0x141004A
-#define CE_COMM_EXEC__A                                              0x1800000
-#define CE_REG_COMM_EXEC__A                                          0x1810000
-#define CE_REG_TAPSET__A                                             0x1810011
-#define CE_REG_AVG_POW__A                                            0x1810012
-#define CE_REG_MAX_POW__A                                            0x1810013
-#define CE_REG_ATT__A                                                0x1810014
-#define CE_REG_NRED__A                                               0x1810015
-#define CE_REG_NE_ERR_SELECT__A                                      0x1810043
-#define CE_REG_NE_TD_CAL__A                                          0x1810044
-#define CE_REG_NE_MIXAVG__A                                          0x1810046
-#define CE_REG_NE_NUPD_OFS__A                                        0x1810047
-#define CE_REG_PE_NEXP_OFFS__A                                       0x1810050
-#define CE_REG_PE_TIMESHIFT__A                                       0x1810051
-#define CE_REG_TP_A0_TAP_NEW__A                                      0x1810064
-#define CE_REG_TP_A0_TAP_NEW_VALID__A                                0x1810065
-#define CE_REG_TP_A0_MU_LMS_STEP__A                                  0x1810066
-#define CE_REG_TP_A1_TAP_NEW__A                                      0x1810068
-#define CE_REG_TP_A1_TAP_NEW_VALID__A                                0x1810069
-#define CE_REG_TP_A1_MU_LMS_STEP__A                                  0x181006A
-#define CE_REG_TI_NEXP_OFFS__A                                       0x1810070
-#define CE_REG_FI_SHT_INCR__A                                        0x1810090
-#define CE_REG_FI_EXP_NORM__A                                        0x1810091
-#define CE_REG_IR_INPUTSEL__A                                        0x18100A0
-#define CE_REG_IR_STARTPOS__A                                        0x18100A1
-#define CE_REG_IR_NEXP_THRES__A                                      0x18100A2
-#define CE_REG_FR_TREAL00__A                                         0x1820010
-#define CE_REG_FR_TIMAG00__A                                         0x1820011
-#define CE_REG_FR_TREAL01__A                                         0x1820012
-#define CE_REG_FR_TIMAG01__A                                         0x1820013
-#define CE_REG_FR_TREAL02__A                                         0x1820014
-#define CE_REG_FR_TIMAG02__A                                         0x1820015
-#define CE_REG_FR_TREAL03__A                                         0x1820016
-#define CE_REG_FR_TIMAG03__A                                         0x1820017
-#define CE_REG_FR_TREAL04__A                                         0x1820018
-#define CE_REG_FR_TIMAG04__A                                         0x1820019
-#define CE_REG_FR_TREAL05__A                                         0x182001A
-#define CE_REG_FR_TIMAG05__A                                         0x182001B
-#define CE_REG_FR_TREAL06__A                                         0x182001C
-#define CE_REG_FR_TIMAG06__A                                         0x182001D
-#define CE_REG_FR_TREAL07__A                                         0x182001E
-#define CE_REG_FR_TIMAG07__A                                         0x182001F
-#define CE_REG_FR_TREAL08__A                                         0x1820020
-#define CE_REG_FR_TIMAG08__A                                         0x1820021
-#define CE_REG_FR_TREAL09__A                                         0x1820022
-#define CE_REG_FR_TIMAG09__A                                         0x1820023
-#define CE_REG_FR_TREAL10__A                                         0x1820024
-#define CE_REG_FR_TIMAG10__A                                         0x1820025
-#define CE_REG_FR_TREAL11__A                                         0x1820026
-#define CE_REG_FR_TIMAG11__A                                         0x1820027
-#define CE_REG_FR_MID_TAP__A                                         0x1820028
-#define CE_REG_FR_SQS_G00__A                                         0x1820029
-#define CE_REG_FR_SQS_G01__A                                         0x182002A
-#define CE_REG_FR_SQS_G02__A                                         0x182002B
-#define CE_REG_FR_SQS_G03__A                                         0x182002C
-#define CE_REG_FR_SQS_G04__A                                         0x182002D
-#define CE_REG_FR_SQS_G05__A                                         0x182002E
-#define CE_REG_FR_SQS_G06__A                                         0x182002F
-#define CE_REG_FR_SQS_G07__A                                         0x1820030
-#define CE_REG_FR_SQS_G08__A                                         0x1820031
-#define CE_REG_FR_SQS_G09__A                                         0x1820032
-#define CE_REG_FR_SQS_G10__A                                         0x1820033
-#define CE_REG_FR_SQS_G11__A                                         0x1820034
-#define CE_REG_FR_SQS_G12__A                                         0x1820035
-#define CE_REG_FR_RIO_G00__A                                         0x1820036
-#define CE_REG_FR_RIO_G01__A                                         0x1820037
-#define CE_REG_FR_RIO_G02__A                                         0x1820038
-#define CE_REG_FR_RIO_G03__A                                         0x1820039
-#define CE_REG_FR_RIO_G04__A                                         0x182003A
-#define CE_REG_FR_RIO_G05__A                                         0x182003B
-#define CE_REG_FR_RIO_G06__A                                         0x182003C
-#define CE_REG_FR_RIO_G07__A                                         0x182003D
-#define CE_REG_FR_RIO_G08__A                                         0x182003E
-#define CE_REG_FR_RIO_G09__A                                         0x182003F
-#define CE_REG_FR_RIO_G10__A                                         0x1820040
-#define CE_REG_FR_MODE__A                                            0x1820041
-#define CE_REG_FR_SQS_TRH__A                                         0x1820042
-#define CE_REG_FR_RIO_GAIN__A                                        0x1820043
-#define CE_REG_FR_BYPASS__A                                          0x1820044
-#define CE_REG_FR_PM_SET__A                                          0x1820045
-#define CE_REG_FR_ERR_SH__A                                          0x1820046
-#define CE_REG_FR_MAN_SH__A                                          0x1820047
-#define CE_REG_FR_TAP_SH__A                                          0x1820048
-#define EQ_COMM_EXEC__A                                              0x1C00000
-#define EQ_REG_COMM_EXEC__A                                          0x1C10000
-#define EQ_REG_COMM_MB__A                                            0x1C10002
-#define EQ_REG_IS_GAIN_MAN__A                                        0x1C10015
-#define EQ_REG_IS_GAIN_EXP__A                                        0x1C10016
-#define EQ_REG_IS_CLIP_EXP__A                                        0x1C10017
-#define EQ_REG_SN_CEGAIN__A                                          0x1C1002A
-#define EQ_REG_SN_OFFSET__A                                          0x1C1002B
-#define EQ_REG_RC_SEL_CAR__A                                         0x1C10032
-#define   EQ_REG_RC_SEL_CAR_INIT                                     0x0
-#define     EQ_REG_RC_SEL_CAR_DIV_ON                                 0x1
-#define     EQ_REG_RC_SEL_CAR_PASS_A_CC                              0x0
-#define     EQ_REG_RC_SEL_CAR_PASS_B_CE                              0x2
-#define     EQ_REG_RC_SEL_CAR_LOCAL_A_CC                             0x0
-#define     EQ_REG_RC_SEL_CAR_LOCAL_B_CE                             0x8
-#define     EQ_REG_RC_SEL_CAR_MEAS_A_CC                              0x0
-#define     EQ_REG_RC_SEL_CAR_MEAS_B_CE                              0x20
-#define EQ_REG_OT_CONST__A                                           0x1C10046
-#define EQ_REG_OT_ALPHA__A                                           0x1C10047
-#define EQ_REG_OT_QNT_THRES0__A                                      0x1C10048
-#define EQ_REG_OT_QNT_THRES1__A                                      0x1C10049
-#define EQ_REG_OT_CSI_STEP__A                                        0x1C1004A
-#define EQ_REG_OT_CSI_OFFSET__A                                      0x1C1004B
-#define EQ_REG_TD_REQ_SMB_CNT__A                                     0x1C10061
-#define EQ_REG_TD_TPS_PWR_OFS__A                                     0x1C10062
-#define EC_SB_REG_COMM_EXEC__A                                       0x2010000
-#define EC_SB_REG_TR_MODE__A                                         0x2010010
-#define   EC_SB_REG_TR_MODE_8K                                       0x0
-#define   EC_SB_REG_TR_MODE_2K                                       0x1
-#define EC_SB_REG_CONST__A                                           0x2010011
-#define   EC_SB_REG_CONST_QPSK                                       0x0
-#define   EC_SB_REG_CONST_16QAM                                      0x1
-#define   EC_SB_REG_CONST_64QAM                                      0x2
-#define EC_SB_REG_ALPHA__A                                           0x2010012
-#define EC_SB_REG_PRIOR__A                                           0x2010013
-#define   EC_SB_REG_PRIOR_HI                                         0x0
-#define   EC_SB_REG_PRIOR_LO                                         0x1
-#define EC_SB_REG_CSI_HI__A                                          0x2010014
-#define EC_SB_REG_CSI_LO__A                                          0x2010015
-#define EC_SB_REG_SMB_TGL__A                                         0x2010016
-#define EC_SB_REG_SNR_HI__A                                          0x2010017
-#define EC_SB_REG_SNR_MID__A                                         0x2010018
-#define EC_SB_REG_SNR_LO__A                                          0x2010019
-#define EC_SB_REG_SCALE_MSB__A                                       0x201001A
-#define EC_SB_REG_SCALE_BIT2__A                                      0x201001B
-#define EC_SB_REG_SCALE_LSB__A                                       0x201001C
-#define EC_SB_REG_CSI_OFS__A                                         0x201001D
-#define EC_VD_REG_COMM_EXEC__A                                       0x2090000
-#define EC_VD_REG_FORCE__A                                           0x2090010
-#define EC_VD_REG_SET_CODERATE__A                                    0x2090011
-#define   EC_VD_REG_SET_CODERATE_C1_2                                0x0
-#define   EC_VD_REG_SET_CODERATE_C2_3                                0x1
-#define   EC_VD_REG_SET_CODERATE_C3_4                                0x2
-#define   EC_VD_REG_SET_CODERATE_C5_6                                0x3
-#define   EC_VD_REG_SET_CODERATE_C7_8                                0x4
-#define EC_VD_REG_REQ_SMB_CNT__A                                     0x2090012
-#define EC_VD_REG_RLK_ENA__A                                         0x2090014
-#define EC_OD_REG_COMM_EXEC__A                                       0x2110000
-#define EC_OD_REG_SYNC__A                                            0x2110010
-#define EC_OD_DEINT_RAM__A                                           0x2120000
-#define EC_RS_REG_COMM_EXEC__A                                       0x2130000
-#define EC_RS_REG_REQ_PCK_CNT__A                                     0x2130010
-#define EC_RS_REG_VAL__A                                             0x2130011
-#define   EC_RS_REG_VAL_PCK                                          0x1
-#define EC_RS_EC_RAM__A                                              0x2140000
-#define EC_OC_REG_COMM_EXEC__A                                       0x2150000
-#define     EC_OC_REG_COMM_EXEC_CTL_ACTIVE                           0x1
-#define     EC_OC_REG_COMM_EXEC_CTL_HOLD                             0x2
-#define EC_OC_REG_COMM_INT_STA__A                                    0x2150007
-#define EC_OC_REG_OC_MODE_LOP__A                                     0x2150010
-#define   EC_OC_REG_OC_MODE_LOP_PAR_ENA__M                           0x1
-#define     EC_OC_REG_OC_MODE_LOP_PAR_ENA_ENABLE                     0x0
-#define     EC_OC_REG_OC_MODE_LOP_PAR_ENA_DISABLE                    0x1
-#define   EC_OC_REG_OC_MODE_LOP_DTO_CTR_SRC__M                       0x4
-#define     EC_OC_REG_OC_MODE_LOP_DTO_CTR_SRC_STATIC                 0x0
-#define   EC_OC_REG_OC_MODE_LOP_MPG_TRM_MDE__M                       0x80
-#define     EC_OC_REG_OC_MODE_LOP_MPG_TRM_MDE_SERIAL                 0x80
-#define EC_OC_REG_OC_MODE_HIP__A                                     0x2150011
-#define     EC_OC_REG_OC_MODE_HIP_MPG_BUS_SRC_MONITOR                0x10
-#define   EC_OC_REG_OC_MODE_HIP_MPG_PAR_VAL__M                       0x200
-#define     EC_OC_REG_OC_MODE_HIP_MPG_PAR_VAL_DISABLE                0x0
-#define     EC_OC_REG_OC_MODE_HIP_MPG_PAR_VAL_ENABLE                 0x200
-#define EC_OC_REG_OC_MPG_SIO__A                                      0x2150012
-#define EC_OC_REG_OC_MPG_SIO__M                                      0xFFF
-#define EC_OC_REG_OC_MON_SIO__A                                      0x2150013
-#define EC_OC_REG_DTO_INC_LOP__A                                     0x2150014
-#define EC_OC_REG_DTO_INC_HIP__A                                     0x2150015
-#define EC_OC_REG_SNC_ISC_LVL__A                                     0x2150016
-#define   EC_OC_REG_SNC_ISC_LVL_OSC__M                               0xF0
-#define EC_OC_REG_TMD_TOP_MODE__A                                    0x215001D
-#define EC_OC_REG_TMD_TOP_CNT__A                                     0x215001E
-#define EC_OC_REG_TMD_HIL_MAR__A                                     0x215001F
-#define EC_OC_REG_TMD_LOL_MAR__A                                     0x2150020
-#define EC_OC_REG_TMD_CUR_CNT__A                                     0x2150021
-#define EC_OC_REG_AVR_ASH_CNT__A                                     0x2150023
-#define EC_OC_REG_AVR_BSH_CNT__A                                     0x2150024
-#define EC_OC_REG_RCN_MODE__A                                        0x2150027
-#define EC_OC_REG_RCN_CRA_LOP__A                                     0x2150028
-#define EC_OC_REG_RCN_CRA_HIP__A                                     0x2150029
-#define EC_OC_REG_RCN_CST_LOP__A                                     0x215002A
-#define EC_OC_REG_RCN_CST_HIP__A                                     0x215002B
-#define EC_OC_REG_RCN_SET_LVL__A                                     0x215002C
-#define EC_OC_REG_RCN_GAI_LVL__A                                     0x215002D
-#define EC_OC_REG_RCN_CLP_LOP__A                                     0x2150032
-#define EC_OC_REG_RCN_CLP_HIP__A                                     0x2150033
-#define EC_OC_REG_RCN_MAP_LOP__A                                     0x2150034
-#define EC_OC_REG_RCN_MAP_HIP__A                                     0x2150035
-#define EC_OC_REG_OCR_MPG_UOS__A                                     0x2150036
-#define EC_OC_REG_OCR_MPG_UOS__M                                     0xFFF
-#define   EC_OC_REG_OCR_MPG_UOS_INIT                                 0x0
-#define EC_OC_REG_OCR_MPG_USR_DAT__A                                 0x2150038
-#define EC_OC_REG_OCR_MON_UOS__A                                     0x2150039
-#define     EC_OC_REG_OCR_MON_UOS_DAT_0_ENABLE                       0x1
-#define     EC_OC_REG_OCR_MON_UOS_DAT_1_ENABLE                       0x2
-#define     EC_OC_REG_OCR_MON_UOS_DAT_2_ENABLE                       0x4
-#define     EC_OC_REG_OCR_MON_UOS_DAT_3_ENABLE                       0x8
-#define     EC_OC_REG_OCR_MON_UOS_DAT_4_ENABLE                       0x10
-#define     EC_OC_REG_OCR_MON_UOS_DAT_5_ENABLE                       0x20
-#define     EC_OC_REG_OCR_MON_UOS_DAT_6_ENABLE                       0x40
-#define     EC_OC_REG_OCR_MON_UOS_DAT_7_ENABLE                       0x80
-#define     EC_OC_REG_OCR_MON_UOS_DAT_8_ENABLE                       0x100
-#define     EC_OC_REG_OCR_MON_UOS_DAT_9_ENABLE                       0x200
-#define     EC_OC_REG_OCR_MON_UOS_VAL_ENABLE                         0x400
-#define     EC_OC_REG_OCR_MON_UOS_CLK_ENABLE                         0x800
-#define EC_OC_REG_OCR_MON_WRI__A                                     0x215003A
-#define   EC_OC_REG_OCR_MON_WRI_INIT                                 0x0
-#define EC_OC_REG_IPR_INV_MPG__A                                     0x2150045
-#define CC_REG_OSC_MODE__A                                           0x2410010
-#define   CC_REG_OSC_MODE_M20                                        0x1
-#define CC_REG_PLL_MODE__A                                           0x2410011
-#define     CC_REG_PLL_MODE_BYPASS_PLL                               0x1
-#define     CC_REG_PLL_MODE_PUMP_CUR_12                              0x14
-#define CC_REG_REF_DIVIDE__A                                         0x2410012
-#define CC_REG_PWD_MODE__A                                           0x2410015
-#define   CC_REG_PWD_MODE_DOWN_PLL                                   0x2
-#define CC_REG_UPDATE__A                                             0x2410017
-#define   CC_REG_UPDATE_KEY                                          0x3973
-#define CC_REG_JTAGID_L__A                                           0x2410019
-#define LC_COMM_EXEC__A                                              0x2800000
-#define LC_RA_RAM_IFINCR_NOM_L__A                                    0x282000C
-#define LC_RA_RAM_FILTER_SYM_SET__A                                  0x282001A
-#define LC_RA_RAM_FILTER_SYM_SET__PRE                                0x3E8
-#define LC_RA_RAM_FILTER_CRMM_A__A                                   0x2820060
-#define LC_RA_RAM_FILTER_CRMM_A__PRE                                 0x4
-#define LC_RA_RAM_FILTER_CRMM_B__A                                   0x2820061
-#define LC_RA_RAM_FILTER_CRMM_B__PRE                                 0x1
-#define LC_RA_RAM_FILTER_SRMM_A__A                                   0x2820068
-#define LC_RA_RAM_FILTER_SRMM_A__PRE                                 0x4
-#define LC_RA_RAM_FILTER_SRMM_B__A                                   0x2820069
-#define LC_RA_RAM_FILTER_SRMM_B__PRE                                 0x1
-#define B_HI_COMM_EXEC__A                                            0x400000
-#define B_HI_COMM_MB__A                                              0x400002
-#define B_HI_CT_REG_COMM_STATE__A                                    0x410001
-#define B_HI_RA_RAM_SRV_RES__A                                       0x420031
-#define B_HI_RA_RAM_SRV_CMD__A                                       0x420032
-#define   B_HI_RA_RAM_SRV_CMD_RESET                                  0x2
-#define   B_HI_RA_RAM_SRV_CMD_CONFIG                                 0x3
-#define   B_HI_RA_RAM_SRV_CMD_EXECUTE                                0x6
-#define B_HI_RA_RAM_SRV_RST_KEY__A                                   0x420033
-#define   B_HI_RA_RAM_SRV_RST_KEY_ACT                                0x3973
-#define B_HI_RA_RAM_SRV_CFG_KEY__A                                   0x420033
-#define B_HI_RA_RAM_SRV_CFG_DIV__A                                   0x420034
-#define B_HI_RA_RAM_SRV_CFG_BDL__A                                   0x420035
-#define B_HI_RA_RAM_SRV_CFG_WUP__A                                   0x420036
-#define B_HI_RA_RAM_SRV_CFG_ACT__A                                   0x420037
-#define     B_HI_RA_RAM_SRV_CFG_ACT_SLV0_ON                          0x1
-#define   B_HI_RA_RAM_SRV_CFG_ACT_BRD__M                             0x4
-#define     B_HI_RA_RAM_SRV_CFG_ACT_BRD_OFF                          0x0
-#define     B_HI_RA_RAM_SRV_CFG_ACT_BRD_ON                           0x4
-#define     B_HI_RA_RAM_SRV_CFG_ACT_PWD_EXE                          0x8
-#define B_HI_RA_RAM_USR_BEGIN__A                                     0x420040
-#define B_HI_IF_RAM_TRP_BPT0__AX                                     0x430000
-#define B_HI_IF_RAM_USR_BEGIN__A                                     0x430200
-#define B_SC_COMM_EXEC__A                                            0x800000
-#define     B_SC_COMM_EXEC_CTL_STOP                                  0x0
-#define B_SC_COMM_STATE__A                                           0x800001
-#define B_SC_RA_RAM_PARAM0__A                                        0x820040
-#define B_SC_RA_RAM_PARAM1__A                                        0x820041
-#define B_SC_RA_RAM_CMD_ADDR__A                                      0x820042
-#define B_SC_RA_RAM_CMD__A                                           0x820043
-#define   B_SC_RA_RAM_CMD_PROC_START                                 0x1
-#define   B_SC_RA_RAM_CMD_SET_PREF_PARAM                             0x3
-#define   B_SC_RA_RAM_CMD_GET_OP_PARAM                               0x5
-#define   B_SC_RA_RAM_SW_EVENT_RUN_NMASK__M                          0x1
-#define   B_SC_RA_RAM_LOCKTRACK_MIN                                  0x1
-#define     B_SC_RA_RAM_OP_PARAM_MODE_2K                             0x0
-#define     B_SC_RA_RAM_OP_PARAM_MODE_8K                             0x1
-#define     B_SC_RA_RAM_OP_PARAM_GUARD_32                            0x0
-#define     B_SC_RA_RAM_OP_PARAM_GUARD_16                            0x4
-#define     B_SC_RA_RAM_OP_PARAM_GUARD_8                             0x8
-#define     B_SC_RA_RAM_OP_PARAM_GUARD_4                             0xC
-#define     B_SC_RA_RAM_OP_PARAM_CONST_QPSK                          0x0
-#define     B_SC_RA_RAM_OP_PARAM_CONST_QAM16                         0x10
-#define     B_SC_RA_RAM_OP_PARAM_CONST_QAM64                         0x20
-#define     B_SC_RA_RAM_OP_PARAM_HIER_NO                             0x0
-#define     B_SC_RA_RAM_OP_PARAM_HIER_A1                             0x40
-#define     B_SC_RA_RAM_OP_PARAM_HIER_A2                             0x80
-#define     B_SC_RA_RAM_OP_PARAM_HIER_A4                             0xC0
-#define     B_SC_RA_RAM_OP_PARAM_RATE_1_2                            0x0
-#define     B_SC_RA_RAM_OP_PARAM_RATE_2_3                            0x200
-#define     B_SC_RA_RAM_OP_PARAM_RATE_3_4                            0x400
-#define     B_SC_RA_RAM_OP_PARAM_RATE_5_6                            0x600
-#define     B_SC_RA_RAM_OP_PARAM_RATE_7_8                            0x800
-#define     B_SC_RA_RAM_OP_PARAM_PRIO_HI                             0x0
-#define     B_SC_RA_RAM_OP_PARAM_PRIO_LO                             0x1000
-#define   B_SC_RA_RAM_OP_AUTO_MODE__M                                0x1
-#define   B_SC_RA_RAM_OP_AUTO_GUARD__M                               0x2
-#define   B_SC_RA_RAM_OP_AUTO_CONST__M                               0x4
-#define   B_SC_RA_RAM_OP_AUTO_HIER__M                                0x8
-#define   B_SC_RA_RAM_OP_AUTO_RATE__M                                0x10
-#define B_SC_RA_RAM_LOCK__A                                          0x82004B
-#define   B_SC_RA_RAM_LOCK_DEMOD__M                                  0x1
-#define   B_SC_RA_RAM_LOCK_FEC__M                                    0x2
-#define   B_SC_RA_RAM_LOCK_MPEG__M                                   0x4
-#define B_SC_RA_RAM_BE_OPT_ENA__A                                    0x82004C
-#define   B_SC_RA_RAM_BE_OPT_ENA_CP_OPT                              0x1
-#define B_SC_RA_RAM_BE_OPT_DELAY__A                                  0x82004D
-#define B_SC_RA_RAM_CONFIG__A                                        0x820050
-#define   B_SC_RA_RAM_CONFIG_FR_ENABLE__M                            0x4
-#define   B_SC_RA_RAM_CONFIG_FREQSCAN__M                             0x10
-#define   B_SC_RA_RAM_CONFIG_SLAVE__M                                0x20
-#define   B_SC_RA_RAM_CONFIG_DIV_BLANK_ENABLE__M                     0x200
-#define   B_SC_RA_RAM_CONFIG_DIV_ECHO_ENABLE__M                      0x400
-#define B_SC_RA_RAM_CO_TD_CAL_2K__A                                  0x82005D
-#define B_SC_RA_RAM_CO_TD_CAL_8K__A                                  0x82005E
-#define B_SC_RA_RAM_IF_SAVE__AX                                      0x82008E
-#define B_SC_RA_RAM_DIVERSITY_DELAY_2K_32__A                         0x820098
-#define B_SC_RA_RAM_DIVERSITY_DELAY_2K_16__A                         0x820099
-#define B_SC_RA_RAM_DIVERSITY_DELAY_2K_8__A                          0x82009A
-#define B_SC_RA_RAM_DIVERSITY_DELAY_2K_4__A                          0x82009B
-#define B_SC_RA_RAM_DIVERSITY_DELAY_8K_32__A                         0x82009C
-#define B_SC_RA_RAM_DIVERSITY_DELAY_8K_16__A                         0x82009D
-#define B_SC_RA_RAM_DIVERSITY_DELAY_8K_8__A                          0x82009E
-#define B_SC_RA_RAM_DIVERSITY_DELAY_8K_4__A                          0x82009F
-#define B_SC_RA_RAM_IR_COARSE_2K_LENGTH__A                           0x8200D1
-#define B_SC_RA_RAM_IR_COARSE_2K_LENGTH__PRE                         0x9
-#define B_SC_RA_RAM_IR_COARSE_2K_FREQINC__A                          0x8200D2
-#define B_SC_RA_RAM_IR_COARSE_2K_FREQINC__PRE                        0x4
-#define B_SC_RA_RAM_IR_COARSE_2K_KAISINC__A                          0x8200D3
-#define B_SC_RA_RAM_IR_COARSE_2K_KAISINC__PRE                        0x100
-#define B_SC_RA_RAM_IR_COARSE_8K_LENGTH__A                           0x8200D4
-#define B_SC_RA_RAM_IR_COARSE_8K_LENGTH__PRE                         0x8
-#define B_SC_RA_RAM_IR_COARSE_8K_FREQINC__A                          0x8200D5
-#define B_SC_RA_RAM_IR_COARSE_8K_FREQINC__PRE                        0x8
-#define B_SC_RA_RAM_IR_COARSE_8K_KAISINC__A                          0x8200D6
-#define B_SC_RA_RAM_IR_COARSE_8K_KAISINC__PRE                        0x200
-#define B_SC_RA_RAM_IR_FINE_2K_LENGTH__A                             0x8200D7
-#define B_SC_RA_RAM_IR_FINE_2K_LENGTH__PRE                           0x9
-#define B_SC_RA_RAM_IR_FINE_2K_FREQINC__A                            0x8200D8
-#define B_SC_RA_RAM_IR_FINE_2K_FREQINC__PRE                          0x4
-#define B_SC_RA_RAM_IR_FINE_2K_KAISINC__A                            0x8200D9
-#define B_SC_RA_RAM_IR_FINE_2K_KAISINC__PRE                          0x100
-#define B_SC_RA_RAM_IR_FINE_8K_LENGTH__A                             0x8200DA
-#define B_SC_RA_RAM_IR_FINE_8K_LENGTH__PRE                           0xB
-#define B_SC_RA_RAM_IR_FINE_8K_FREQINC__A                            0x8200DB
-#define B_SC_RA_RAM_IR_FINE_8K_FREQINC__PRE                          0x1
-#define B_SC_RA_RAM_IR_FINE_8K_KAISINC__A                            0x8200DC
-#define B_SC_RA_RAM_IR_FINE_8K_KAISINC__PRE                          0x40
-#define B_SC_RA_RAM_ECHO_SHIFT_LIM__A                                0x8200DD
-#define B_SC_RA_RAM_SAMPLE_RATE_COUNT__A                             0x8200E8
-#define B_SC_RA_RAM_SAMPLE_RATE_STEP__A                              0x8200E9
-#define B_SC_RA_RAM_BAND__A                                          0x8200EC
-#define B_SC_RA_RAM_LC_ABS_2K__A                                     0x8200F4
-#define B_SC_RA_RAM_LC_ABS_2K__PRE                                   0x1F
-#define B_SC_RA_RAM_LC_ABS_8K__A                                     0x8200F5
-#define B_SC_RA_RAM_LC_ABS_8K__PRE                                   0x1F
-#define B_SC_RA_RAM_EQ_IS_GAIN_UNKNOWN_MAN__PRE                      0x100
-#define B_SC_RA_RAM_EQ_IS_GAIN_UNKNOWN_EXP__PRE                      0x4
-#define B_SC_RA_RAM_EQ_IS_GAIN_QPSK_MAN__PRE                         0x1E2
-#define B_SC_RA_RAM_EQ_IS_GAIN_QPSK_EXP__PRE                         0x4
-#define B_SC_RA_RAM_EQ_IS_GAIN_16QAM_MAN__PRE                        0x10D
-#define B_SC_RA_RAM_EQ_IS_GAIN_16QAM_EXP__PRE                        0x5
-#define B_SC_RA_RAM_EQ_IS_GAIN_16QAM_A2_MAN__PRE                     0x17D
-#define B_SC_RA_RAM_EQ_IS_GAIN_16QAM_A2_EXP__PRE                     0x4
-#define B_SC_RA_RAM_EQ_IS_GAIN_16QAM_A4_MAN__PRE                     0x133
-#define B_SC_RA_RAM_EQ_IS_GAIN_16QAM_A4_EXP__PRE                     0x5
-#define B_SC_RA_RAM_EQ_IS_GAIN_64QAM_MAN__PRE                        0x114
-#define B_SC_RA_RAM_EQ_IS_GAIN_64QAM_EXP__PRE                        0x5
-#define B_SC_RA_RAM_EQ_IS_GAIN_64QAM_A2_MAN__PRE                     0x14A
-#define B_SC_RA_RAM_EQ_IS_GAIN_64QAM_A2_EXP__PRE                     0x4
-#define B_SC_RA_RAM_EQ_IS_GAIN_64QAM_A4_MAN__PRE                     0x1BB
-#define B_SC_RA_RAM_EQ_IS_GAIN_64QAM_A4_EXP__PRE                     0x4
-#define B_SC_RA_RAM_DRIVER_VERSION__AX                               0x8201FE
-#define   B_SC_RA_RAM_PROC_LOCKTRACK                                 0x0
-#define B_FE_COMM_EXEC__A                                            0xC00000
-#define B_FE_AD_REG_COMM_EXEC__A                                     0xC10000
-#define B_FE_AD_REG_FDB_IN__A                                        0xC10012
-#define B_FE_AD_REG_PD__A                                            0xC10013
-#define B_FE_AD_REG_INVEXT__A                                        0xC10014
-#define B_FE_AD_REG_CLKNEG__A                                        0xC10015
-#define B_FE_AG_REG_COMM_EXEC__A                                     0xC20000
-#define B_FE_AG_REG_AG_MODE_LOP__A                                   0xC20010
-#define   B_FE_AG_REG_AG_MODE_LOP_MODE_4__M                          0x10
-#define     B_FE_AG_REG_AG_MODE_LOP_MODE_4_STATIC                    0x0
-#define     B_FE_AG_REG_AG_MODE_LOP_MODE_4_DYNAMIC                   0x10
-#define   B_FE_AG_REG_AG_MODE_LOP_MODE_5__M                          0x20
-#define     B_FE_AG_REG_AG_MODE_LOP_MODE_5_STATIC                    0x0
-#define   B_FE_AG_REG_AG_MODE_LOP_MODE_C__M                          0x1000
-#define     B_FE_AG_REG_AG_MODE_LOP_MODE_C_STATIC                    0x0
-#define     B_FE_AG_REG_AG_MODE_LOP_MODE_C_DYNAMIC                   0x1000
-#define   B_FE_AG_REG_AG_MODE_LOP_MODE_E__M                          0x4000
-#define     B_FE_AG_REG_AG_MODE_LOP_MODE_E_STATIC                    0x0
-#define     B_FE_AG_REG_AG_MODE_LOP_MODE_E_DYNAMIC                   0x4000
-#define B_FE_AG_REG_AG_MODE_HIP__A                                   0xC20011
-#define   B_FE_AG_REG_AG_MODE_HIP_MODE_J__M                          0x8
-#define     B_FE_AG_REG_AG_MODE_HIP_MODE_J_STATIC                    0x0
-#define     B_FE_AG_REG_AG_MODE_HIP_MODE_J_DYNAMIC                   0x8
-#define B_FE_AG_REG_AG_PGA_MODE__A                                   0xC20012
-#define   B_FE_AG_REG_AG_PGA_MODE_PFY_PCY_AFY_REN                    0x0
-#define   B_FE_AG_REG_AG_PGA_MODE_PFN_PCN_AFY_REN                    0x1
-#define B_FE_AG_REG_AG_AGC_SIO__A                                    0xC20013
-#define   B_FE_AG_REG_AG_AGC_SIO_AGC_SIO_2__M                        0x2
-#define     B_FE_AG_REG_AG_AGC_SIO_AGC_SIO_2_OUTPUT                  0x0
-#define     B_FE_AG_REG_AG_AGC_SIO_AGC_SIO_2_INPUT                   0x2
-#define B_FE_AG_REG_AG_PWD__A                                        0xC20015
-#define   B_FE_AG_REG_AG_PWD_PWD_PD2__M                              0x2
-#define     B_FE_AG_REG_AG_PWD_PWD_PD2_DISABLE                       0x0
-#define     B_FE_AG_REG_AG_PWD_PWD_PD2_ENABLE                        0x2
-#define B_FE_AG_REG_DCE_AUR_CNT__A                                   0xC20016
-#define B_FE_AG_REG_DCE_RUR_CNT__A                                   0xC20017
-#define B_FE_AG_REG_ACE_AUR_CNT__A                                   0xC2001A
-#define B_FE_AG_REG_ACE_RUR_CNT__A                                   0xC2001B
-#define B_FE_AG_REG_CDR_RUR_CNT__A                                   0xC20020
-#define B_FE_AG_REG_EGC_RUR_CNT__A                                   0xC20024
-#define B_FE_AG_REG_EGC_SET_LVL__A                                   0xC20025
-#define B_FE_AG_REG_EGC_SET_LVL__M                                   0x1FF
-#define B_FE_AG_REG_EGC_FLA_RGN__A                                   0xC20026
-#define B_FE_AG_REG_EGC_SLO_RGN__A                                   0xC20027
-#define B_FE_AG_REG_EGC_JMP_PSN__A                                   0xC20028
-#define B_FE_AG_REG_EGC_FLA_INC__A                                   0xC20029
-#define B_FE_AG_REG_EGC_FLA_DEC__A                                   0xC2002A
-#define B_FE_AG_REG_EGC_SLO_INC__A                                   0xC2002B
-#define B_FE_AG_REG_EGC_SLO_DEC__A                                   0xC2002C
-#define B_FE_AG_REG_EGC_FAS_INC__A                                   0xC2002D
-#define B_FE_AG_REG_EGC_FAS_DEC__A                                   0xC2002E
-#define B_FE_AG_REG_PM1_AGC_WRI__A                                   0xC20030
-#define B_FE_AG_REG_PM1_AGC_WRI__M                                   0x7FF
-#define B_FE_AG_REG_GC1_AGC_RIC__A                                   0xC20031
-#define B_FE_AG_REG_GC1_AGC_OFF__A                                   0xC20032
-#define B_FE_AG_REG_GC1_AGC_MAX__A                                   0xC20033
-#define B_FE_AG_REG_GC1_AGC_MIN__A                                   0xC20034
-#define B_FE_AG_REG_GC1_AGC_DAT__A                                   0xC20035
-#define B_FE_AG_REG_GC1_AGC_DAT__M                                   0x3FF
-#define B_FE_AG_REG_PM2_AGC_WRI__A                                   0xC20036
-#define B_FE_AG_REG_IND_WIN__A                                       0xC2003C
-#define B_FE_AG_REG_IND_THD_LOL__A                                   0xC2003D
-#define B_FE_AG_REG_IND_THD_HIL__A                                   0xC2003E
-#define B_FE_AG_REG_IND_DEL__A                                       0xC2003F
-#define B_FE_AG_REG_IND_PD1_WRI__A                                   0xC20040
-#define B_FE_AG_REG_PDA_AUR_CNT__A                                   0xC20041
-#define B_FE_AG_REG_PDA_RUR_CNT__A                                   0xC20042
-#define B_FE_AG_REG_PDA_AVE_DAT__A                                   0xC20043
-#define B_FE_AG_REG_PDC_RUR_CNT__A                                   0xC20044
-#define B_FE_AG_REG_PDC_SET_LVL__A                                   0xC20045
-#define B_FE_AG_REG_PDC_FLA_RGN__A                                   0xC20046
-#define B_FE_AG_REG_PDC_JMP_PSN__A                                   0xC20047
-#define B_FE_AG_REG_PDC_FLA_STP__A                                   0xC20048
-#define B_FE_AG_REG_PDC_SLO_STP__A                                   0xC20049
-#define B_FE_AG_REG_PDC_PD2_WRI__A                                   0xC2004A
-#define B_FE_AG_REG_PDC_MAP_DAT__A                                   0xC2004B
-#define B_FE_AG_REG_PDC_MAX__A                                       0xC2004C
-#define B_FE_AG_REG_TGA_AUR_CNT__A                                   0xC2004D
-#define B_FE_AG_REG_TGA_RUR_CNT__A                                   0xC2004E
-#define B_FE_AG_REG_TGA_AVE_DAT__A                                   0xC2004F
-#define B_FE_AG_REG_TGC_RUR_CNT__A                                   0xC20050
-#define B_FE_AG_REG_TGC_SET_LVL__A                                   0xC20051
-#define B_FE_AG_REG_TGC_SET_LVL__M                                   0x3F
-#define B_FE_AG_REG_TGC_FLA_RGN__A                                   0xC20052
-#define B_FE_AG_REG_TGC_JMP_PSN__A                                   0xC20053
-#define B_FE_AG_REG_TGC_FLA_STP__A                                   0xC20054
-#define B_FE_AG_REG_TGC_SLO_STP__A                                   0xC20055
-#define B_FE_AG_REG_TGC_MAP_DAT__A                                   0xC20056
-#define B_FE_AG_REG_FGM_WRI__A                                       0xC20061
-#define B_FE_AG_REG_BGC_FGC_WRI__A                                   0xC20068
-#define B_FE_AG_REG_BGC_CGC_WRI__A                                   0xC20069
-#define B_FE_FS_REG_COMM_EXEC__A                                     0xC30000
-#define B_FE_FS_REG_ADD_INC_LOP__A                                   0xC30010
-#define B_FE_FD_REG_COMM_EXEC__A                                     0xC40000
-#define B_FE_FD_REG_SCL__A                                           0xC40010
-#define B_FE_FD_REG_MAX_LEV__A                                       0xC40011
-#define B_FE_FD_REG_NR__A                                            0xC40012
-#define B_FE_FD_REG_MEAS_VAL__A                                      0xC40014
-#define B_FE_IF_REG_COMM_EXEC__A                                     0xC50000
-#define B_FE_IF_REG_INCR0__A                                         0xC50010
-#define B_FE_IF_REG_INCR0__W                                         16
-#define B_FE_IF_REG_INCR0__M                                         0xFFFF
-#define B_FE_IF_REG_INCR1__A                                         0xC50011
-#define B_FE_IF_REG_INCR1__M                                         0xFF
-#define B_FE_CF_REG_COMM_EXEC__A                                     0xC60000
-#define B_FE_CF_REG_SCL__A                                           0xC60010
-#define B_FE_CF_REG_MAX_LEV__A                                       0xC60011
-#define B_FE_CF_REG_NR__A                                            0xC60012
-#define B_FE_CF_REG_IMP_VAL__A                                       0xC60013
-#define B_FE_CF_REG_MEAS_VAL__A                                      0xC60014
-#define B_FE_CU_REG_COMM_EXEC__A                                     0xC70000
-#define B_FE_CU_REG_FRM_CNT_RST__A                                   0xC70011
-#define B_FE_CU_REG_FRM_CNT_STR__A                                   0xC70012
-#define B_FE_CU_REG_CTR_NFC_ICR__A                                   0xC70020
-#define B_FE_CU_REG_CTR_NFC_OCR__A                                   0xC70021
-#define B_FE_CU_REG_DIV_NFC_CLP__A                                   0xC70027
-#define B_FT_COMM_EXEC__A                                            0x1000000
-#define B_FT_REG_COMM_EXEC__A                                        0x1010000
-#define B_CP_COMM_EXEC__A                                            0x1400000
-#define B_CP_REG_COMM_EXEC__A                                        0x1410000
-#define B_CP_REG_INTERVAL__A                                         0x1410011
-#define B_CP_REG_BR_SPL_OFFSET__A                                    0x1410023
-#define B_CP_REG_BR_STR_DEL__A                                       0x1410024
-#define B_CP_REG_RT_ANG_INC0__A                                      0x1410030
-#define B_CP_REG_RT_ANG_INC1__A                                      0x1410031
-#define B_CP_REG_RT_DETECT_TRH__A                                    0x1410033
-#define B_CP_REG_AC_NEXP_OFFS__A                                     0x1410040
-#define B_CP_REG_AC_AVER_POW__A                                      0x1410041
-#define B_CP_REG_AC_MAX_POW__A                                       0x1410042
-#define B_CP_REG_AC_WEIGHT_MAN__A                                    0x1410043
-#define B_CP_REG_AC_WEIGHT_EXP__A                                    0x1410044
-#define B_CP_REG_AC_AMP_MODE__A                                      0x1410047
-#define B_CP_REG_AC_AMP_FIX__A                                       0x1410048
-#define B_CP_REG_AC_ANG_MODE__A                                      0x141004A
-#define B_CE_COMM_EXEC__A                                            0x1800000
-#define B_CE_REG_COMM_EXEC__A                                        0x1810000
-#define B_CE_REG_TAPSET__A                                           0x1810011
-#define B_CE_REG_AVG_POW__A                                          0x1810012
-#define B_CE_REG_MAX_POW__A                                          0x1810013
-#define B_CE_REG_ATT__A                                              0x1810014
-#define B_CE_REG_NRED__A                                             0x1810015
-#define B_CE_REG_NE_ERR_SELECT__A                                    0x1810043
-#define B_CE_REG_NE_TD_CAL__A                                        0x1810044
-#define B_CE_REG_NE_MIXAVG__A                                        0x1810046
-#define B_CE_REG_NE_NUPD_OFS__A                                      0x1810047
-#define B_CE_REG_PE_NEXP_OFFS__A                                     0x1810050
-#define B_CE_REG_PE_TIMESHIFT__A                                     0x1810051
-#define B_CE_REG_TP_A0_TAP_NEW__A                                    0x1810064
-#define B_CE_REG_TP_A0_TAP_NEW_VALID__A                              0x1810065
-#define B_CE_REG_TP_A0_MU_LMS_STEP__A                                0x1810066
-#define B_CE_REG_TP_A1_TAP_NEW__A                                    0x1810068
-#define B_CE_REG_TP_A1_TAP_NEW_VALID__A                              0x1810069
-#define B_CE_REG_TP_A1_MU_LMS_STEP__A                                0x181006A
-#define B_CE_REG_TI_PHN_ENABLE__A                                    0x1810073
-#define B_CE_REG_FI_SHT_INCR__A                                      0x1810090
-#define B_CE_REG_FI_EXP_NORM__A                                      0x1810091
-#define B_CE_REG_IR_INPUTSEL__A                                      0x18100A0
-#define B_CE_REG_IR_STARTPOS__A                                      0x18100A1
-#define B_CE_REG_IR_NEXP_THRES__A                                    0x18100A2
-#define B_CE_REG_FR_TREAL00__A                                       0x1820010
-#define B_CE_REG_FR_TIMAG00__A                                       0x1820011
-#define B_CE_REG_FR_TREAL01__A                                       0x1820012
-#define B_CE_REG_FR_TIMAG01__A                                       0x1820013
-#define B_CE_REG_FR_TREAL02__A                                       0x1820014
-#define B_CE_REG_FR_TIMAG02__A                                       0x1820015
-#define B_CE_REG_FR_TREAL03__A                                       0x1820016
-#define B_CE_REG_FR_TIMAG03__A                                       0x1820017
-#define B_CE_REG_FR_TREAL04__A                                       0x1820018
-#define B_CE_REG_FR_TIMAG04__A                                       0x1820019
-#define B_CE_REG_FR_TREAL05__A                                       0x182001A
-#define B_CE_REG_FR_TIMAG05__A                                       0x182001B
-#define B_CE_REG_FR_TREAL06__A                                       0x182001C
-#define B_CE_REG_FR_TIMAG06__A                                       0x182001D
-#define B_CE_REG_FR_TREAL07__A                                       0x182001E
-#define B_CE_REG_FR_TIMAG07__A                                       0x182001F
-#define B_CE_REG_FR_TREAL08__A                                       0x1820020
-#define B_CE_REG_FR_TIMAG08__A                                       0x1820021
-#define B_CE_REG_FR_TREAL09__A                                       0x1820022
-#define B_CE_REG_FR_TIMAG09__A                                       0x1820023
-#define B_CE_REG_FR_TREAL10__A                                       0x1820024
-#define B_CE_REG_FR_TIMAG10__A                                       0x1820025
-#define B_CE_REG_FR_TREAL11__A                                       0x1820026
-#define B_CE_REG_FR_TIMAG11__A                                       0x1820027
-#define B_CE_REG_FR_MID_TAP__A                                       0x1820028
-#define B_CE_REG_FR_SQS_G00__A                                       0x1820029
-#define B_CE_REG_FR_SQS_G01__A                                       0x182002A
-#define B_CE_REG_FR_SQS_G02__A                                       0x182002B
-#define B_CE_REG_FR_SQS_G03__A                                       0x182002C
-#define B_CE_REG_FR_SQS_G04__A                                       0x182002D
-#define B_CE_REG_FR_SQS_G05__A                                       0x182002E
-#define B_CE_REG_FR_SQS_G06__A                                       0x182002F
-#define B_CE_REG_FR_SQS_G07__A                                       0x1820030
-#define B_CE_REG_FR_SQS_G08__A                                       0x1820031
-#define B_CE_REG_FR_SQS_G09__A                                       0x1820032
-#define B_CE_REG_FR_SQS_G10__A                                       0x1820033
-#define B_CE_REG_FR_SQS_G11__A                                       0x1820034
-#define B_CE_REG_FR_SQS_G12__A                                       0x1820035
-#define B_CE_REG_FR_RIO_G00__A                                       0x1820036
-#define B_CE_REG_FR_RIO_G01__A                                       0x1820037
-#define B_CE_REG_FR_RIO_G02__A                                       0x1820038
-#define B_CE_REG_FR_RIO_G03__A                                       0x1820039
-#define B_CE_REG_FR_RIO_G04__A                                       0x182003A
-#define B_CE_REG_FR_RIO_G05__A                                       0x182003B
-#define B_CE_REG_FR_RIO_G06__A                                       0x182003C
-#define B_CE_REG_FR_RIO_G07__A                                       0x182003D
-#define B_CE_REG_FR_RIO_G08__A                                       0x182003E
-#define B_CE_REG_FR_RIO_G09__A                                       0x182003F
-#define B_CE_REG_FR_RIO_G10__A                                       0x1820040
-#define B_CE_REG_FR_MODE__A                                          0x1820041
-#define B_CE_REG_FR_SQS_TRH__A                                       0x1820042
-#define B_CE_REG_FR_RIO_GAIN__A                                      0x1820043
-#define B_CE_REG_FR_BYPASS__A                                        0x1820044
-#define B_CE_REG_FR_PM_SET__A                                        0x1820045
-#define B_CE_REG_FR_ERR_SH__A                                        0x1820046
-#define B_CE_REG_FR_MAN_SH__A                                        0x1820047
-#define B_CE_REG_FR_TAP_SH__A                                        0x1820048
-#define B_EQ_COMM_EXEC__A                                            0x1C00000
-#define B_EQ_REG_COMM_EXEC__A                                        0x1C10000
-#define B_EQ_REG_COMM_MB__A                                          0x1C10002
-#define B_EQ_REG_IS_GAIN_MAN__A                                      0x1C10015
-#define B_EQ_REG_IS_GAIN_EXP__A                                      0x1C10016
-#define B_EQ_REG_IS_CLIP_EXP__A                                      0x1C10017
-#define B_EQ_REG_SN_CEGAIN__A                                        0x1C1002A
-#define B_EQ_REG_SN_OFFSET__A                                        0x1C1002B
-#define B_EQ_REG_RC_SEL_CAR__A                                       0x1C10032
-#define   B_EQ_REG_RC_SEL_CAR_INIT                                   0x2
-#define     B_EQ_REG_RC_SEL_CAR_DIV_ON                               0x1
-#define     B_EQ_REG_RC_SEL_CAR_PASS_A_CC                            0x0
-#define     B_EQ_REG_RC_SEL_CAR_PASS_B_CE                            0x2
-#define     B_EQ_REG_RC_SEL_CAR_LOCAL_A_CC                           0x0
-#define     B_EQ_REG_RC_SEL_CAR_LOCAL_B_CE                           0x8
-#define     B_EQ_REG_RC_SEL_CAR_MEAS_A_CC                            0x0
-#define     B_EQ_REG_RC_SEL_CAR_MEAS_B_CE                            0x20
-#define   B_EQ_REG_RC_SEL_CAR_FFTMODE__M                             0x80
-#define B_EQ_REG_OT_CONST__A                                         0x1C10046
-#define B_EQ_REG_OT_ALPHA__A                                         0x1C10047
-#define B_EQ_REG_OT_QNT_THRES0__A                                    0x1C10048
-#define B_EQ_REG_OT_QNT_THRES1__A                                    0x1C10049
-#define B_EQ_REG_OT_CSI_STEP__A                                      0x1C1004A
-#define B_EQ_REG_OT_CSI_OFFSET__A                                    0x1C1004B
-#define B_EQ_REG_TD_REQ_SMB_CNT__A                                   0x1C10061
-#define B_EQ_REG_TD_TPS_PWR_OFS__A                                   0x1C10062
-#define B_EC_SB_REG_COMM_EXEC__A                                     0x2010000
-#define B_EC_SB_REG_TR_MODE__A                                       0x2010010
-#define   B_EC_SB_REG_TR_MODE_8K                                     0x0
-#define   B_EC_SB_REG_TR_MODE_2K                                     0x1
-#define B_EC_SB_REG_CONST__A                                         0x2010011
-#define   B_EC_SB_REG_CONST_QPSK                                     0x0
-#define   B_EC_SB_REG_CONST_16QAM                                    0x1
-#define   B_EC_SB_REG_CONST_64QAM                                    0x2
-#define B_EC_SB_REG_ALPHA__A                                         0x2010012
-#define B_EC_SB_REG_PRIOR__A                                         0x2010013
-#define   B_EC_SB_REG_PRIOR_HI                                       0x0
-#define   B_EC_SB_REG_PRIOR_LO                                       0x1
-#define B_EC_SB_REG_CSI_HI__A                                        0x2010014
-#define B_EC_SB_REG_CSI_LO__A                                        0x2010015
-#define B_EC_SB_REG_SMB_TGL__A                                       0x2010016
-#define B_EC_SB_REG_SNR_HI__A                                        0x2010017
-#define B_EC_SB_REG_SNR_MID__A                                       0x2010018
-#define B_EC_SB_REG_SNR_LO__A                                        0x2010019
-#define B_EC_SB_REG_SCALE_MSB__A                                     0x201001A
-#define B_EC_SB_REG_SCALE_BIT2__A                                    0x201001B
-#define B_EC_SB_REG_SCALE_LSB__A                                     0x201001C
-#define B_EC_SB_REG_CSI_OFS0__A                                      0x201001D
-#define B_EC_SB_REG_CSI_OFS1__A                                      0x201001E
-#define B_EC_SB_REG_CSI_OFS2__A                                      0x201001F
-#define B_EC_VD_REG_COMM_EXEC__A                                     0x2090000
-#define B_EC_VD_REG_FORCE__A                                         0x2090010
-#define B_EC_VD_REG_SET_CODERATE__A                                  0x2090011
-#define   B_EC_VD_REG_SET_CODERATE_C1_2                              0x0
-#define   B_EC_VD_REG_SET_CODERATE_C2_3                              0x1
-#define   B_EC_VD_REG_SET_CODERATE_C3_4                              0x2
-#define   B_EC_VD_REG_SET_CODERATE_C5_6                              0x3
-#define   B_EC_VD_REG_SET_CODERATE_C7_8                              0x4
-#define B_EC_VD_REG_REQ_SMB_CNT__A                                   0x2090012
-#define B_EC_VD_REG_RLK_ENA__A                                       0x2090014
-#define B_EC_OD_REG_COMM_EXEC__A                                     0x2110000
-#define B_EC_OD_REG_SYNC__A                                          0x2110664
-#define B_EC_OD_DEINT_RAM__A                                         0x2120000
-#define B_EC_RS_REG_COMM_EXEC__A                                     0x2130000
-#define B_EC_RS_REG_REQ_PCK_CNT__A                                   0x2130010
-#define B_EC_RS_REG_VAL__A                                           0x2130011
-#define   B_EC_RS_REG_VAL_PCK                                        0x1
-#define B_EC_RS_EC_RAM__A                                            0x2140000
-#define B_EC_OC_REG_COMM_EXEC__A                                     0x2150000
-#define     B_EC_OC_REG_COMM_EXEC_CTL_ACTIVE                         0x1
-#define     B_EC_OC_REG_COMM_EXEC_CTL_HOLD                           0x2
-#define B_EC_OC_REG_COMM_INT_STA__A                                  0x2150007
-#define B_EC_OC_REG_OC_MODE_LOP__A                                   0x2150010
-#define   B_EC_OC_REG_OC_MODE_LOP_PAR_ENA__M                         0x1
-#define     B_EC_OC_REG_OC_MODE_LOP_PAR_ENA_ENABLE                   0x0
-#define     B_EC_OC_REG_OC_MODE_LOP_PAR_ENA_DISABLE                  0x1
-#define   B_EC_OC_REG_OC_MODE_LOP_DTO_CTR_SRC__M                     0x4
-#define     B_EC_OC_REG_OC_MODE_LOP_DTO_CTR_SRC_STATIC               0x0
-#define   B_EC_OC_REG_OC_MODE_LOP_MPG_TRM_MDE__M                     0x80
-#define     B_EC_OC_REG_OC_MODE_LOP_MPG_TRM_MDE_SERIAL               0x80
-#define B_EC_OC_REG_OC_MODE_HIP__A                                   0x2150011
-#define     B_EC_OC_REG_OC_MODE_HIP_MPG_BUS_SRC_MONITOR              0x10
-#define   B_EC_OC_REG_OC_MODE_HIP_MPG_PAR_VAL__M                     0x200
-#define     B_EC_OC_REG_OC_MODE_HIP_MPG_PAR_VAL_DISABLE              0x0
-#define     B_EC_OC_REG_OC_MODE_HIP_MPG_PAR_VAL_ENABLE               0x200
-#define B_EC_OC_REG_OC_MPG_SIO__A                                    0x2150012
-#define B_EC_OC_REG_OC_MPG_SIO__M                                    0xFFF
-#define B_EC_OC_REG_DTO_INC_LOP__A                                   0x2150014
-#define B_EC_OC_REG_DTO_INC_HIP__A                                   0x2150015
-#define B_EC_OC_REG_SNC_ISC_LVL__A                                   0x2150016
-#define   B_EC_OC_REG_SNC_ISC_LVL_OSC__M                             0xF0
-#define B_EC_OC_REG_TMD_TOP_MODE__A                                  0x215001D
-#define B_EC_OC_REG_TMD_TOP_CNT__A                                   0x215001E
-#define B_EC_OC_REG_TMD_HIL_MAR__A                                   0x215001F
-#define B_EC_OC_REG_TMD_LOL_MAR__A                                   0x2150020
-#define B_EC_OC_REG_TMD_CUR_CNT__A                                   0x2150021
-#define B_EC_OC_REG_AVR_ASH_CNT__A                                   0x2150023
-#define B_EC_OC_REG_AVR_BSH_CNT__A                                   0x2150024
-#define B_EC_OC_REG_RCN_MODE__A                                      0x2150027
-#define B_EC_OC_REG_RCN_CRA_LOP__A                                   0x2150028
-#define B_EC_OC_REG_RCN_CRA_HIP__A                                   0x2150029
-#define B_EC_OC_REG_RCN_CST_LOP__A                                   0x215002A
-#define B_EC_OC_REG_RCN_CST_HIP__A                                   0x215002B
-#define B_EC_OC_REG_RCN_SET_LVL__A                                   0x215002C
-#define B_EC_OC_REG_RCN_GAI_LVL__A                                   0x215002D
-#define B_EC_OC_REG_RCN_CLP_LOP__A                                   0x2150032
-#define B_EC_OC_REG_RCN_CLP_HIP__A                                   0x2150033
-#define B_EC_OC_REG_RCN_MAP_LOP__A                                   0x2150034
-#define B_EC_OC_REG_RCN_MAP_HIP__A                                   0x2150035
-#define B_EC_OC_REG_OCR_MPG_UOS__A                                   0x2150036
-#define B_EC_OC_REG_OCR_MPG_UOS__M                                   0xFFF
-#define   B_EC_OC_REG_OCR_MPG_UOS_INIT                               0x0
-#define B_EC_OC_REG_OCR_MPG_USR_DAT__A                               0x2150038
-#define B_EC_OC_REG_IPR_INV_MPG__A                                   0x2150045
-#define B_EC_OC_REG_DTO_CLKMODE__A                                   0x2150047
-#define B_EC_OC_REG_DTO_PER__A                                       0x2150048
-#define B_EC_OC_REG_DTO_BUR__A                                       0x2150049
-#define B_EC_OC_REG_RCR_CLKMODE__A                                   0x215004A
-#define B_CC_REG_OSC_MODE__A                                         0x2410010
-#define   B_CC_REG_OSC_MODE_M20                                      0x1
-#define B_CC_REG_PLL_MODE__A                                         0x2410011
-#define     B_CC_REG_PLL_MODE_BYPASS_PLL                             0x1
-#define     B_CC_REG_PLL_MODE_PUMP_CUR_12                            0x14
-#define B_CC_REG_REF_DIVIDE__A                                       0x2410012
-#define B_CC_REG_PWD_MODE__A                                         0x2410015
-#define   B_CC_REG_PWD_MODE_DOWN_PLL                                 0x2
-#define B_CC_REG_UPDATE__A                                           0x2410017
-#define   B_CC_REG_UPDATE_KEY                                        0x3973
-#define B_CC_REG_JTAGID_L__A                                         0x2410019
-#define B_CC_REG_DIVERSITY__A                                        0x241001B
-#define B_LC_COMM_EXEC__A                                            0x2800000
-#define B_LC_RA_RAM_IFINCR_NOM_L__A                                  0x282000C
-#define B_LC_RA_RAM_FILTER_SYM_SET__A                                0x282001A
-#define B_LC_RA_RAM_FILTER_SYM_SET__PRE                              0x3E8
-#define B_LC_RA_RAM_FILTER_CRMM_A__A                                 0x2820060
-#define B_LC_RA_RAM_FILTER_CRMM_A__PRE                               0x4
-#define B_LC_RA_RAM_FILTER_CRMM_B__A                                 0x2820061
-#define B_LC_RA_RAM_FILTER_CRMM_B__PRE                               0x1
-#define B_LC_RA_RAM_FILTER_SRMM_A__A                                 0x2820068
-#define B_LC_RA_RAM_FILTER_SRMM_A__PRE                               0x4
-#define B_LC_RA_RAM_FILTER_SRMM_B__A                                 0x2820069
-#define B_LC_RA_RAM_FILTER_SRMM_B__PRE                               0x1
-
-#endif
diff --git a/drivers/media/dvb/frontends/drxk.h b/drivers/media/dvb/frontends/drxk.h
deleted file mode 100644
index d615d7d..0000000
--- a/drivers/media/dvb/frontends/drxk.h
+++ /dev/null
@@ -1,66 +0,0 @@
-#ifndef _DRXK_H_
-#define _DRXK_H_
-
-#include <linux/types.h>
-#include <linux/i2c.h>
-
-/**
- * struct drxk_config - Configure the initial parameters for DRX-K
- *
- * @adr:		I2C Address of the DRX-K
- * @parallel_ts:	True means that the device uses parallel TS,
- * 			Serial otherwise.
- * @dynamic_clk:	True means that the clock will be dynamically
- *			adjusted. Static clock otherwise.
- * @enable_merr_cfg:	Enable SIO_PDR_PERR_CFG/SIO_PDR_MVAL_CFG.
- * @single_master:	Device is on the single master mode
- * @no_i2c_bridge:	Don't switch the I2C bridge to talk with tuner
- * @antenna_gpio:	GPIO bit used to control the antenna
- * @antenna_dvbt:	GPIO bit for changing antenna to DVB-C. A value of 1
- *			means that 1=DVBC, 0 = DVBT. Zero means the opposite.
- * @mpeg_out_clk_strength: DRXK Mpeg output clock drive strength.
- * @microcode_name:	Name of the firmware file with the microcode
- * @qam_demod_parameter_count:	The number of parameters used for the command
- *				to set the demodulator parameters. All
- *				firmwares are using the 2-parameter commmand.
- *				An exception is the "drxk_a3.mc" firmware,
- *				which uses the 4-parameter command.
- *				A value of 0 (default) or lower indicates that
- *				the correct number of parameters will be
- *				automatically detected.
- *
- * On the *_gpio vars, bit 0 is UIO-1, bit 1 is UIO-2 and bit 2 is
- * UIO-3.
- */
-struct drxk_config {
-	u8	adr;
-	bool	single_master;
-	bool	no_i2c_bridge;
-	bool	parallel_ts;
-	bool	dynamic_clk;
-	bool	enable_merr_cfg;
-
-	bool	antenna_dvbt;
-	u16	antenna_gpio;
-
-	u8	mpeg_out_clk_strength;
-	int	chunk_size;
-
-	const char	*microcode_name;
-	int		 qam_demod_parameter_count;
-};
-
-#if defined(CONFIG_DVB_DRXK) || (defined(CONFIG_DVB_DRXK_MODULE) \
-        && defined(MODULE))
-extern struct dvb_frontend *drxk_attach(const struct drxk_config *config,
-					struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *drxk_attach(const struct drxk_config *config,
-					struct i2c_adapter *i2c)
-{
-        printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-        return NULL;
-}
-#endif
-
-#endif
diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb/frontends/drxk_hard.c
deleted file mode 100644
index 1ab8154..0000000
--- a/drivers/media/dvb/frontends/drxk_hard.c
+++ /dev/null
@@ -1,6637 +0,0 @@
-/*
- * drxk_hard: DRX-K DVB-C/T demodulator driver
- *
- * Copyright (C) 2010-2011 Digital Devices GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 only, as published by the Free Software Foundation.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/firmware.h>
-#include <linux/i2c.h>
-#include <linux/hardirq.h>
-#include <asm/div64.h>
-
-#include "dvb_frontend.h"
-#include "drxk.h"
-#include "drxk_hard.h"
-
-static int PowerDownDVBT(struct drxk_state *state, bool setPowerMode);
-static int PowerDownQAM(struct drxk_state *state);
-static int SetDVBTStandard(struct drxk_state *state,
-			   enum OperationMode oMode);
-static int SetQAMStandard(struct drxk_state *state,
-			  enum OperationMode oMode);
-static int SetQAM(struct drxk_state *state, u16 IntermediateFreqkHz,
-		  s32 tunerFreqOffset);
-static int SetDVBTStandard(struct drxk_state *state,
-			   enum OperationMode oMode);
-static int DVBTStart(struct drxk_state *state);
-static int SetDVBT(struct drxk_state *state, u16 IntermediateFreqkHz,
-		   s32 tunerFreqOffset);
-static int GetQAMLockStatus(struct drxk_state *state, u32 *pLockStatus);
-static int GetDVBTLockStatus(struct drxk_state *state, u32 *pLockStatus);
-static int SwitchAntennaToQAM(struct drxk_state *state);
-static int SwitchAntennaToDVBT(struct drxk_state *state);
-
-static bool IsDVBT(struct drxk_state *state)
-{
-	return state->m_OperationMode == OM_DVBT;
-}
-
-static bool IsQAM(struct drxk_state *state)
-{
-	return state->m_OperationMode == OM_QAM_ITU_A ||
-	    state->m_OperationMode == OM_QAM_ITU_B ||
-	    state->m_OperationMode == OM_QAM_ITU_C;
-}
-
-bool IsA1WithPatchCode(struct drxk_state *state)
-{
-	return state->m_DRXK_A1_PATCH_CODE;
-}
-
-bool IsA1WithRomCode(struct drxk_state *state)
-{
-	return state->m_DRXK_A1_ROM_CODE;
-}
-
-#define NOA1ROM 0
-
-#define DRXDAP_FASI_SHORT_FORMAT(addr) (((addr) & 0xFC30FF80) == 0)
-#define DRXDAP_FASI_LONG_FORMAT(addr)  (((addr) & 0xFC30FF80) != 0)
-
-#define DEFAULT_MER_83  165
-#define DEFAULT_MER_93  250
-
-#ifndef DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH
-#define DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH (0x02)
-#endif
-
-#ifndef DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH
-#define DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH (0x03)
-#endif
-
-#define DEFAULT_DRXK_MPEG_LOCK_TIMEOUT 700
-#define DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT 500
-
-#ifndef DRXK_KI_RAGC_ATV
-#define DRXK_KI_RAGC_ATV   4
-#endif
-#ifndef DRXK_KI_IAGC_ATV
-#define DRXK_KI_IAGC_ATV   6
-#endif
-#ifndef DRXK_KI_DAGC_ATV
-#define DRXK_KI_DAGC_ATV   7
-#endif
-
-#ifndef DRXK_KI_RAGC_QAM
-#define DRXK_KI_RAGC_QAM   3
-#endif
-#ifndef DRXK_KI_IAGC_QAM
-#define DRXK_KI_IAGC_QAM   4
-#endif
-#ifndef DRXK_KI_DAGC_QAM
-#define DRXK_KI_DAGC_QAM   7
-#endif
-#ifndef DRXK_KI_RAGC_DVBT
-#define DRXK_KI_RAGC_DVBT  (IsA1WithPatchCode(state) ? 3 : 2)
-#endif
-#ifndef DRXK_KI_IAGC_DVBT
-#define DRXK_KI_IAGC_DVBT  (IsA1WithPatchCode(state) ? 4 : 2)
-#endif
-#ifndef DRXK_KI_DAGC_DVBT
-#define DRXK_KI_DAGC_DVBT  (IsA1WithPatchCode(state) ? 10 : 7)
-#endif
-
-#ifndef DRXK_AGC_DAC_OFFSET
-#define DRXK_AGC_DAC_OFFSET (0x800)
-#endif
-
-#ifndef DRXK_BANDWIDTH_8MHZ_IN_HZ
-#define DRXK_BANDWIDTH_8MHZ_IN_HZ  (0x8B8249L)
-#endif
-
-#ifndef DRXK_BANDWIDTH_7MHZ_IN_HZ
-#define DRXK_BANDWIDTH_7MHZ_IN_HZ  (0x7A1200L)
-#endif
-
-#ifndef DRXK_BANDWIDTH_6MHZ_IN_HZ
-#define DRXK_BANDWIDTH_6MHZ_IN_HZ  (0x68A1B6L)
-#endif
-
-#ifndef DRXK_QAM_SYMBOLRATE_MAX
-#define DRXK_QAM_SYMBOLRATE_MAX         (7233000)
-#endif
-
-#define DRXK_BL_ROM_OFFSET_TAPS_DVBT    56
-#define DRXK_BL_ROM_OFFSET_TAPS_ITU_A   64
-#define DRXK_BL_ROM_OFFSET_TAPS_ITU_C   0x5FE0
-#define DRXK_BL_ROM_OFFSET_TAPS_BG      24
-#define DRXK_BL_ROM_OFFSET_TAPS_DKILLP  32
-#define DRXK_BL_ROM_OFFSET_TAPS_NTSC    40
-#define DRXK_BL_ROM_OFFSET_TAPS_FM      48
-#define DRXK_BL_ROM_OFFSET_UCODE        0
-
-#define DRXK_BLC_TIMEOUT                100
-
-#define DRXK_BLCC_NR_ELEMENTS_TAPS      2
-#define DRXK_BLCC_NR_ELEMENTS_UCODE     6
-
-#define DRXK_BLDC_NR_ELEMENTS_TAPS      28
-
-#ifndef DRXK_OFDM_NE_NOTCH_WIDTH
-#define DRXK_OFDM_NE_NOTCH_WIDTH             (4)
-#endif
-
-#define DRXK_QAM_SL_SIG_POWER_QAM16       (40960)
-#define DRXK_QAM_SL_SIG_POWER_QAM32       (20480)
-#define DRXK_QAM_SL_SIG_POWER_QAM64       (43008)
-#define DRXK_QAM_SL_SIG_POWER_QAM128      (20992)
-#define DRXK_QAM_SL_SIG_POWER_QAM256      (43520)
-
-static unsigned int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "enable debug messages");
-
-#define dprintk(level, fmt, arg...) do {			\
-if (debug >= level)						\
-	printk(KERN_DEBUG "drxk: %s" fmt, __func__, ## arg);	\
-} while (0)
-
-
-static inline u32 MulDiv32(u32 a, u32 b, u32 c)
-{
-	u64 tmp64;
-
-	tmp64 = (u64) a * (u64) b;
-	do_div(tmp64, c);
-
-	return (u32) tmp64;
-}
-
-inline u32 Frac28a(u32 a, u32 c)
-{
-	int i = 0;
-	u32 Q1 = 0;
-	u32 R0 = 0;
-
-	R0 = (a % c) << 4;	/* 32-28 == 4 shifts possible at max */
-	Q1 = a / c;		/* integer part, only the 4 least significant bits
-				   will be visible in the result */
-
-	/* division using radix 16, 7 nibbles in the result */
-	for (i = 0; i < 7; i++) {
-		Q1 = (Q1 << 4) | (R0 / c);
-		R0 = (R0 % c) << 4;
-	}
-	/* rounding */
-	if ((R0 >> 3) >= c)
-		Q1++;
-
-	return Q1;
-}
-
-static u32 Log10Times100(u32 x)
-{
-	static const u8 scale = 15;
-	static const u8 indexWidth = 5;
-	u8 i = 0;
-	u32 y = 0;
-	u32 d = 0;
-	u32 k = 0;
-	u32 r = 0;
-	/*
-	   log2lut[n] = (1<<scale) * 200 * log2(1.0 + ((1.0/(1<<INDEXWIDTH)) * n))
-	   0 <= n < ((1<<INDEXWIDTH)+1)
-	 */
-
-	static const u32 log2lut[] = {
-		0,		/* 0.000000 */
-		290941,		/* 290941.300628 */
-		573196,		/* 573196.476418 */
-		847269,		/* 847269.179851 */
-		1113620,	/* 1113620.489452 */
-		1372674,	/* 1372673.576986 */
-		1624818,	/* 1624817.752104 */
-		1870412,	/* 1870411.981536 */
-		2109788,	/* 2109787.962654 */
-		2343253,	/* 2343252.817465 */
-		2571091,	/* 2571091.461923 */
-		2793569,	/* 2793568.696416 */
-		3010931,	/* 3010931.055901 */
-		3223408,	/* 3223408.452106 */
-		3431216,	/* 3431215.635215 */
-		3634553,	/* 3634553.498355 */
-		3833610,	/* 3833610.244726 */
-		4028562,	/* 4028562.434393 */
-		4219576,	/* 4219575.925308 */
-		4406807,	/* 4406806.721144 */
-		4590402,	/* 4590401.736809 */
-		4770499,	/* 4770499.491025 */
-		4947231,	/* 4947230.734179 */
-		5120719,	/* 5120719.018555 */
-		5291081,	/* 5291081.217197 */
-		5458428,	/* 5458427.996830 */
-		5622864,	/* 5622864.249668 */
-		5784489,	/* 5784489.488298 */
-		5943398,	/* 5943398.207380 */
-		6099680,	/* 6099680.215452 */
-		6253421,	/* 6253420.939751 */
-		6404702,	/* 6404701.706649 */
-		6553600,	/* 6553600.000000 */
-	};
-
-
-	if (x == 0)
-		return 0;
-
-	/* Scale x (normalize) */
-	/* computing y in log(x/y) = log(x) - log(y) */
-	if ((x & ((0xffffffff) << (scale + 1))) == 0) {
-		for (k = scale; k > 0; k--) {
-			if (x & (((u32) 1) << scale))
-				break;
-			x <<= 1;
-		}
-	} else {
-		for (k = scale; k < 31; k++) {
-			if ((x & (((u32) (-1)) << (scale + 1))) == 0)
-				break;
-			x >>= 1;
-		}
-	}
-	/*
-	   Now x has binary point between bit[scale] and bit[scale-1]
-	   and 1.0 <= x < 2.0 */
-
-	/* correction for divison: log(x) = log(x/y)+log(y) */
-	y = k * ((((u32) 1) << scale) * 200);
-
-	/* remove integer part */
-	x &= ((((u32) 1) << scale) - 1);
-	/* get index */
-	i = (u8) (x >> (scale - indexWidth));
-	/* compute delta (x - a) */
-	d = x & ((((u32) 1) << (scale - indexWidth)) - 1);
-	/* compute log, multiplication (d* (..)) must be within range ! */
-	y += log2lut[i] +
-	    ((d * (log2lut[i + 1] - log2lut[i])) >> (scale - indexWidth));
-	/* Conver to log10() */
-	y /= 108853;		/* (log2(10) << scale) */
-	r = (y >> 1);
-	/* rounding */
-	if (y & ((u32) 1))
-		r++;
-	return r;
-}
-
-/****************************************************************************/
-/* I2C **********************************************************************/
-/****************************************************************************/
-
-static int drxk_i2c_lock(struct drxk_state *state)
-{
-	i2c_lock_adapter(state->i2c);
-	state->drxk_i2c_exclusive_lock = true;
-
-	return 0;
-}
-
-static void drxk_i2c_unlock(struct drxk_state *state)
-{
-	if (!state->drxk_i2c_exclusive_lock)
-		return;
-
-	i2c_unlock_adapter(state->i2c);
-	state->drxk_i2c_exclusive_lock = false;
-}
-
-static int drxk_i2c_transfer(struct drxk_state *state, struct i2c_msg *msgs,
-			     unsigned len)
-{
-	if (state->drxk_i2c_exclusive_lock)
-		return __i2c_transfer(state->i2c, msgs, len);
-	else
-		return i2c_transfer(state->i2c, msgs, len);
-}
-
-static int i2c_read1(struct drxk_state *state, u8 adr, u8 *val)
-{
-	struct i2c_msg msgs[1] = { {.addr = adr, .flags = I2C_M_RD,
-				    .buf = val, .len = 1}
-	};
-
-	return drxk_i2c_transfer(state, msgs, 1);
-}
-
-static int i2c_write(struct drxk_state *state, u8 adr, u8 *data, int len)
-{
-	int status;
-	struct i2c_msg msg = {
-	    .addr = adr, .flags = 0, .buf = data, .len = len };
-
-	dprintk(3, ":");
-	if (debug > 2) {
-		int i;
-		for (i = 0; i < len; i++)
-			printk(KERN_CONT " %02x", data[i]);
-		printk(KERN_CONT "\n");
-	}
-	status = drxk_i2c_transfer(state, &msg, 1);
-	if (status >= 0 && status != 1)
-		status = -EIO;
-
-	if (status < 0)
-		printk(KERN_ERR "drxk: i2c write error at addr 0x%02x\n", adr);
-
-	return status;
-}
-
-static int i2c_read(struct drxk_state *state,
-		    u8 adr, u8 *msg, int len, u8 *answ, int alen)
-{
-	int status;
-	struct i2c_msg msgs[2] = {
-		{.addr = adr, .flags = 0,
-				    .buf = msg, .len = len},
-		{.addr = adr, .flags = I2C_M_RD,
-		 .buf = answ, .len = alen}
-	};
-
-	status = drxk_i2c_transfer(state, msgs, 2);
-	if (status != 2) {
-		if (debug > 2)
-			printk(KERN_CONT ": ERROR!\n");
-		if (status >= 0)
-			status = -EIO;
-
-		printk(KERN_ERR "drxk: i2c read error at addr 0x%02x\n", adr);
-		return status;
-	}
-	if (debug > 2) {
-		int i;
-		dprintk(2, ": read from");
-		for (i = 0; i < len; i++)
-			printk(KERN_CONT " %02x", msg[i]);
-		printk(KERN_CONT ", value = ");
-		for (i = 0; i < alen; i++)
-			printk(KERN_CONT " %02x", answ[i]);
-		printk(KERN_CONT "\n");
-	}
-	return 0;
-}
-
-static int read16_flags(struct drxk_state *state, u32 reg, u16 *data, u8 flags)
-{
-	int status;
-	u8 adr = state->demod_address, mm1[4], mm2[2], len;
-
-	if (state->single_master)
-		flags |= 0xC0;
-
-	if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
-		mm1[0] = (((reg << 1) & 0xFF) | 0x01);
-		mm1[1] = ((reg >> 16) & 0xFF);
-		mm1[2] = ((reg >> 24) & 0xFF) | flags;
-		mm1[3] = ((reg >> 7) & 0xFF);
-		len = 4;
-	} else {
-		mm1[0] = ((reg << 1) & 0xFF);
-		mm1[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0));
-		len = 2;
-	}
-	dprintk(2, "(0x%08x, 0x%02x)\n", reg, flags);
-	status = i2c_read(state, adr, mm1, len, mm2, 2);
-	if (status < 0)
-		return status;
-	if (data)
-		*data = mm2[0] | (mm2[1] << 8);
-
-	return 0;
-}
-
-static int read16(struct drxk_state *state, u32 reg, u16 *data)
-{
-	return read16_flags(state, reg, data, 0);
-}
-
-static int read32_flags(struct drxk_state *state, u32 reg, u32 *data, u8 flags)
-{
-	int status;
-	u8 adr = state->demod_address, mm1[4], mm2[4], len;
-
-	if (state->single_master)
-		flags |= 0xC0;
-
-	if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
-		mm1[0] = (((reg << 1) & 0xFF) | 0x01);
-		mm1[1] = ((reg >> 16) & 0xFF);
-		mm1[2] = ((reg >> 24) & 0xFF) | flags;
-		mm1[3] = ((reg >> 7) & 0xFF);
-		len = 4;
-	} else {
-		mm1[0] = ((reg << 1) & 0xFF);
-		mm1[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0));
-		len = 2;
-	}
-	dprintk(2, "(0x%08x, 0x%02x)\n", reg, flags);
-	status = i2c_read(state, adr, mm1, len, mm2, 4);
-	if (status < 0)
-		return status;
-	if (data)
-		*data = mm2[0] | (mm2[1] << 8) |
-		    (mm2[2] << 16) | (mm2[3] << 24);
-
-	return 0;
-}
-
-static int read32(struct drxk_state *state, u32 reg, u32 *data)
-{
-	return read32_flags(state, reg, data, 0);
-}
-
-static int write16_flags(struct drxk_state *state, u32 reg, u16 data, u8 flags)
-{
-	u8 adr = state->demod_address, mm[6], len;
-
-	if (state->single_master)
-		flags |= 0xC0;
-	if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
-		mm[0] = (((reg << 1) & 0xFF) | 0x01);
-		mm[1] = ((reg >> 16) & 0xFF);
-		mm[2] = ((reg >> 24) & 0xFF) | flags;
-		mm[3] = ((reg >> 7) & 0xFF);
-		len = 4;
-	} else {
-		mm[0] = ((reg << 1) & 0xFF);
-		mm[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0));
-		len = 2;
-	}
-	mm[len] = data & 0xff;
-	mm[len + 1] = (data >> 8) & 0xff;
-
-	dprintk(2, "(0x%08x, 0x%04x, 0x%02x)\n", reg, data, flags);
-	return i2c_write(state, adr, mm, len + 2);
-}
-
-static int write16(struct drxk_state *state, u32 reg, u16 data)
-{
-	return write16_flags(state, reg, data, 0);
-}
-
-static int write32_flags(struct drxk_state *state, u32 reg, u32 data, u8 flags)
-{
-	u8 adr = state->demod_address, mm[8], len;
-
-	if (state->single_master)
-		flags |= 0xC0;
-	if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
-		mm[0] = (((reg << 1) & 0xFF) | 0x01);
-		mm[1] = ((reg >> 16) & 0xFF);
-		mm[2] = ((reg >> 24) & 0xFF) | flags;
-		mm[3] = ((reg >> 7) & 0xFF);
-		len = 4;
-	} else {
-		mm[0] = ((reg << 1) & 0xFF);
-		mm[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0));
-		len = 2;
-	}
-	mm[len] = data & 0xff;
-	mm[len + 1] = (data >> 8) & 0xff;
-	mm[len + 2] = (data >> 16) & 0xff;
-	mm[len + 3] = (data >> 24) & 0xff;
-	dprintk(2, "(0x%08x, 0x%08x, 0x%02x)\n", reg, data, flags);
-
-	return i2c_write(state, adr, mm, len + 4);
-}
-
-static int write32(struct drxk_state *state, u32 reg, u32 data)
-{
-	return write32_flags(state, reg, data, 0);
-}
-
-static int write_block(struct drxk_state *state, u32 Address,
-		      const int BlockSize, const u8 pBlock[])
-{
-	int status = 0, BlkSize = BlockSize;
-	u8 Flags = 0;
-
-	if (state->single_master)
-		Flags |= 0xC0;
-
-	while (BlkSize > 0) {
-		int Chunk = BlkSize > state->m_ChunkSize ?
-		    state->m_ChunkSize : BlkSize;
-		u8 *AdrBuf = &state->Chunk[0];
-		u32 AdrLength = 0;
-
-		if (DRXDAP_FASI_LONG_FORMAT(Address) || (Flags != 0)) {
-			AdrBuf[0] = (((Address << 1) & 0xFF) | 0x01);
-			AdrBuf[1] = ((Address >> 16) & 0xFF);
-			AdrBuf[2] = ((Address >> 24) & 0xFF);
-			AdrBuf[3] = ((Address >> 7) & 0xFF);
-			AdrBuf[2] |= Flags;
-			AdrLength = 4;
-			if (Chunk == state->m_ChunkSize)
-				Chunk -= 2;
-		} else {
-			AdrBuf[0] = ((Address << 1) & 0xFF);
-			AdrBuf[1] = (((Address >> 16) & 0x0F) |
-				     ((Address >> 18) & 0xF0));
-			AdrLength = 2;
-		}
-		memcpy(&state->Chunk[AdrLength], pBlock, Chunk);
-		dprintk(2, "(0x%08x, 0x%02x)\n", Address, Flags);
-		if (debug > 1) {
-			int i;
-			if (pBlock)
-				for (i = 0; i < Chunk; i++)
-					printk(KERN_CONT " %02x", pBlock[i]);
-			printk(KERN_CONT "\n");
-		}
-		status = i2c_write(state, state->demod_address,
-				   &state->Chunk[0], Chunk + AdrLength);
-		if (status < 0) {
-			printk(KERN_ERR "drxk: %s: i2c write error at addr 0x%02x\n",
-			       __func__, Address);
-			break;
-		}
-		pBlock += Chunk;
-		Address += (Chunk >> 1);
-		BlkSize -= Chunk;
-	}
-	return status;
-}
-
-#ifndef DRXK_MAX_RETRIES_POWERUP
-#define DRXK_MAX_RETRIES_POWERUP 20
-#endif
-
-int PowerUpDevice(struct drxk_state *state)
-{
-	int status;
-	u8 data = 0;
-	u16 retryCount = 0;
-
-	dprintk(1, "\n");
-
-	status = i2c_read1(state, state->demod_address, &data);
-	if (status < 0) {
-		do {
-			data = 0;
-			status = i2c_write(state, state->demod_address,
-					   &data, 1);
-			msleep(10);
-			retryCount++;
-			if (status < 0)
-				continue;
-			status = i2c_read1(state, state->demod_address,
-					   &data);
-		} while (status < 0 &&
-			 (retryCount < DRXK_MAX_RETRIES_POWERUP));
-		if (status < 0 && retryCount >= DRXK_MAX_RETRIES_POWERUP)
-			goto error;
-	}
-
-	/* Make sure all clk domains are active */
-	status = write16(state, SIO_CC_PWD_MODE__A, SIO_CC_PWD_MODE_LEVEL_NONE);
-	if (status < 0)
-		goto error;
-	status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY);
-	if (status < 0)
-		goto error;
-	/* Enable pll lock tests */
-	status = write16(state, SIO_CC_PLL_LOCK__A, 1);
-	if (status < 0)
-		goto error;
-
-	state->m_currentPowerMode = DRX_POWER_UP;
-
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-
-	return status;
-}
-
-
-static int init_state(struct drxk_state *state)
-{
-	/*
-	 * FIXME: most (all?) of the values bellow should be moved into
-	 * struct drxk_config, as they are probably board-specific
-	 */
-	u32 ulVSBIfAgcMode = DRXK_AGC_CTRL_AUTO;
-	u32 ulVSBIfAgcOutputLevel = 0;
-	u32 ulVSBIfAgcMinLevel = 0;
-	u32 ulVSBIfAgcMaxLevel = 0x7FFF;
-	u32 ulVSBIfAgcSpeed = 3;
-
-	u32 ulVSBRfAgcMode = DRXK_AGC_CTRL_AUTO;
-	u32 ulVSBRfAgcOutputLevel = 0;
-	u32 ulVSBRfAgcMinLevel = 0;
-	u32 ulVSBRfAgcMaxLevel = 0x7FFF;
-	u32 ulVSBRfAgcSpeed = 3;
-	u32 ulVSBRfAgcTop = 9500;
-	u32 ulVSBRfAgcCutOffCurrent = 4000;
-
-	u32 ulATVIfAgcMode = DRXK_AGC_CTRL_AUTO;
-	u32 ulATVIfAgcOutputLevel = 0;
-	u32 ulATVIfAgcMinLevel = 0;
-	u32 ulATVIfAgcMaxLevel = 0;
-	u32 ulATVIfAgcSpeed = 3;
-
-	u32 ulATVRfAgcMode = DRXK_AGC_CTRL_OFF;
-	u32 ulATVRfAgcOutputLevel = 0;
-	u32 ulATVRfAgcMinLevel = 0;
-	u32 ulATVRfAgcMaxLevel = 0;
-	u32 ulATVRfAgcTop = 9500;
-	u32 ulATVRfAgcCutOffCurrent = 4000;
-	u32 ulATVRfAgcSpeed = 3;
-
-	u32 ulQual83 = DEFAULT_MER_83;
-	u32 ulQual93 = DEFAULT_MER_93;
-
-	u32 ulMpegLockTimeOut = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT;
-	u32 ulDemodLockTimeOut = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT;
-
-	/* io_pad_cfg register (8 bit reg.) MSB bit is 1 (default value) */
-	/* io_pad_cfg_mode output mode is drive always */
-	/* io_pad_cfg_drive is set to power 2 (23 mA) */
-	u32 ulGPIOCfg = 0x0113;
-	u32 ulInvertTSClock = 0;
-	u32 ulTSDataStrength = DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH;
-	u32 ulDVBTBitrate = 50000000;
-	u32 ulDVBCBitrate = DRXK_QAM_SYMBOLRATE_MAX * 8;
-
-	u32 ulInsertRSByte = 0;
-
-	u32 ulRfMirror = 1;
-	u32 ulPowerDown = 0;
-
-	dprintk(1, "\n");
-
-	state->m_hasLNA = false;
-	state->m_hasDVBT = false;
-	state->m_hasDVBC = false;
-	state->m_hasATV = false;
-	state->m_hasOOB = false;
-	state->m_hasAudio = false;
-
-	if (!state->m_ChunkSize)
-		state->m_ChunkSize = 124;
-
-	state->m_oscClockFreq = 0;
-	state->m_smartAntInverted = false;
-	state->m_bPDownOpenBridge = false;
-
-	/* real system clock frequency in kHz */
-	state->m_sysClockFreq = 151875;
-	/* Timing div, 250ns/Psys */
-	/* Timing div, = (delay (nano seconds) * sysclk (kHz))/ 1000 */
-	state->m_HICfgTimingDiv = ((state->m_sysClockFreq / 1000) *
-				   HI_I2C_DELAY) / 1000;
-	/* Clipping */
-	if (state->m_HICfgTimingDiv > SIO_HI_RA_RAM_PAR_2_CFG_DIV__M)
-		state->m_HICfgTimingDiv = SIO_HI_RA_RAM_PAR_2_CFG_DIV__M;
-	state->m_HICfgWakeUpKey = (state->demod_address << 1);
-	/* port/bridge/power down ctrl */
-	state->m_HICfgCtrl = SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE;
-
-	state->m_bPowerDown = (ulPowerDown != 0);
-
-	state->m_DRXK_A1_PATCH_CODE = false;
-	state->m_DRXK_A1_ROM_CODE = false;
-	state->m_DRXK_A2_ROM_CODE = false;
-	state->m_DRXK_A3_ROM_CODE = false;
-	state->m_DRXK_A2_PATCH_CODE = false;
-	state->m_DRXK_A3_PATCH_CODE = false;
-
-	/* Init AGC and PGA parameters */
-	/* VSB IF */
-	state->m_vsbIfAgcCfg.ctrlMode = (ulVSBIfAgcMode);
-	state->m_vsbIfAgcCfg.outputLevel = (ulVSBIfAgcOutputLevel);
-	state->m_vsbIfAgcCfg.minOutputLevel = (ulVSBIfAgcMinLevel);
-	state->m_vsbIfAgcCfg.maxOutputLevel = (ulVSBIfAgcMaxLevel);
-	state->m_vsbIfAgcCfg.speed = (ulVSBIfAgcSpeed);
-	state->m_vsbPgaCfg = 140;
-
-	/* VSB RF */
-	state->m_vsbRfAgcCfg.ctrlMode = (ulVSBRfAgcMode);
-	state->m_vsbRfAgcCfg.outputLevel = (ulVSBRfAgcOutputLevel);
-	state->m_vsbRfAgcCfg.minOutputLevel = (ulVSBRfAgcMinLevel);
-	state->m_vsbRfAgcCfg.maxOutputLevel = (ulVSBRfAgcMaxLevel);
-	state->m_vsbRfAgcCfg.speed = (ulVSBRfAgcSpeed);
-	state->m_vsbRfAgcCfg.top = (ulVSBRfAgcTop);
-	state->m_vsbRfAgcCfg.cutOffCurrent = (ulVSBRfAgcCutOffCurrent);
-	state->m_vsbPreSawCfg.reference = 0x07;
-	state->m_vsbPreSawCfg.usePreSaw = true;
-
-	state->m_Quality83percent = DEFAULT_MER_83;
-	state->m_Quality93percent = DEFAULT_MER_93;
-	if (ulQual93 <= 500 && ulQual83 < ulQual93) {
-		state->m_Quality83percent = ulQual83;
-		state->m_Quality93percent = ulQual93;
-	}
-
-	/* ATV IF */
-	state->m_atvIfAgcCfg.ctrlMode = (ulATVIfAgcMode);
-	state->m_atvIfAgcCfg.outputLevel = (ulATVIfAgcOutputLevel);
-	state->m_atvIfAgcCfg.minOutputLevel = (ulATVIfAgcMinLevel);
-	state->m_atvIfAgcCfg.maxOutputLevel = (ulATVIfAgcMaxLevel);
-	state->m_atvIfAgcCfg.speed = (ulATVIfAgcSpeed);
-
-	/* ATV RF */
-	state->m_atvRfAgcCfg.ctrlMode = (ulATVRfAgcMode);
-	state->m_atvRfAgcCfg.outputLevel = (ulATVRfAgcOutputLevel);
-	state->m_atvRfAgcCfg.minOutputLevel = (ulATVRfAgcMinLevel);
-	state->m_atvRfAgcCfg.maxOutputLevel = (ulATVRfAgcMaxLevel);
-	state->m_atvRfAgcCfg.speed = (ulATVRfAgcSpeed);
-	state->m_atvRfAgcCfg.top = (ulATVRfAgcTop);
-	state->m_atvRfAgcCfg.cutOffCurrent = (ulATVRfAgcCutOffCurrent);
-	state->m_atvPreSawCfg.reference = 0x04;
-	state->m_atvPreSawCfg.usePreSaw = true;
-
-
-	/* DVBT RF */
-	state->m_dvbtRfAgcCfg.ctrlMode = DRXK_AGC_CTRL_OFF;
-	state->m_dvbtRfAgcCfg.outputLevel = 0;
-	state->m_dvbtRfAgcCfg.minOutputLevel = 0;
-	state->m_dvbtRfAgcCfg.maxOutputLevel = 0xFFFF;
-	state->m_dvbtRfAgcCfg.top = 0x2100;
-	state->m_dvbtRfAgcCfg.cutOffCurrent = 4000;
-	state->m_dvbtRfAgcCfg.speed = 1;
-
-
-	/* DVBT IF */
-	state->m_dvbtIfAgcCfg.ctrlMode = DRXK_AGC_CTRL_AUTO;
-	state->m_dvbtIfAgcCfg.outputLevel = 0;
-	state->m_dvbtIfAgcCfg.minOutputLevel = 0;
-	state->m_dvbtIfAgcCfg.maxOutputLevel = 9000;
-	state->m_dvbtIfAgcCfg.top = 13424;
-	state->m_dvbtIfAgcCfg.cutOffCurrent = 0;
-	state->m_dvbtIfAgcCfg.speed = 3;
-	state->m_dvbtIfAgcCfg.FastClipCtrlDelay = 30;
-	state->m_dvbtIfAgcCfg.IngainTgtMax = 30000;
-	/* state->m_dvbtPgaCfg = 140; */
-
-	state->m_dvbtPreSawCfg.reference = 4;
-	state->m_dvbtPreSawCfg.usePreSaw = false;
-
-	/* QAM RF */
-	state->m_qamRfAgcCfg.ctrlMode = DRXK_AGC_CTRL_OFF;
-	state->m_qamRfAgcCfg.outputLevel = 0;
-	state->m_qamRfAgcCfg.minOutputLevel = 6023;
-	state->m_qamRfAgcCfg.maxOutputLevel = 27000;
-	state->m_qamRfAgcCfg.top = 0x2380;
-	state->m_qamRfAgcCfg.cutOffCurrent = 4000;
-	state->m_qamRfAgcCfg.speed = 3;
-
-	/* QAM IF */
-	state->m_qamIfAgcCfg.ctrlMode = DRXK_AGC_CTRL_AUTO;
-	state->m_qamIfAgcCfg.outputLevel = 0;
-	state->m_qamIfAgcCfg.minOutputLevel = 0;
-	state->m_qamIfAgcCfg.maxOutputLevel = 9000;
-	state->m_qamIfAgcCfg.top = 0x0511;
-	state->m_qamIfAgcCfg.cutOffCurrent = 0;
-	state->m_qamIfAgcCfg.speed = 3;
-	state->m_qamIfAgcCfg.IngainTgtMax = 5119;
-	state->m_qamIfAgcCfg.FastClipCtrlDelay = 50;
-
-	state->m_qamPgaCfg = 140;
-	state->m_qamPreSawCfg.reference = 4;
-	state->m_qamPreSawCfg.usePreSaw = false;
-
-	state->m_OperationMode = OM_NONE;
-	state->m_DrxkState = DRXK_UNINITIALIZED;
-
-	/* MPEG output configuration */
-	state->m_enableMPEGOutput = true;	/* If TRUE; enable MPEG ouput */
-	state->m_insertRSByte = false;	/* If TRUE; insert RS byte */
-	state->m_invertDATA = false;	/* If TRUE; invert DATA signals */
-	state->m_invertERR = false;	/* If TRUE; invert ERR signal */
-	state->m_invertSTR = false;	/* If TRUE; invert STR signals */
-	state->m_invertVAL = false;	/* If TRUE; invert VAL signals */
-	state->m_invertCLK = (ulInvertTSClock != 0);	/* If TRUE; invert CLK signals */
-
-	/* If TRUE; static MPEG clockrate will be used;
-	   otherwise clockrate will adapt to the bitrate of the TS */
-
-	state->m_DVBTBitrate = ulDVBTBitrate;
-	state->m_DVBCBitrate = ulDVBCBitrate;
-
-	state->m_TSDataStrength = (ulTSDataStrength & 0x07);
-
-	/* Maximum bitrate in b/s in case static clockrate is selected */
-	state->m_mpegTsStaticBitrate = 19392658;
-	state->m_disableTEIhandling = false;
-
-	if (ulInsertRSByte)
-		state->m_insertRSByte = true;
-
-	state->m_MpegLockTimeOut = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT;
-	if (ulMpegLockTimeOut < 10000)
-		state->m_MpegLockTimeOut = ulMpegLockTimeOut;
-	state->m_DemodLockTimeOut = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT;
-	if (ulDemodLockTimeOut < 10000)
-		state->m_DemodLockTimeOut = ulDemodLockTimeOut;
-
-	/* QAM defaults */
-	state->m_Constellation = DRX_CONSTELLATION_AUTO;
-	state->m_qamInterleaveMode = DRXK_QAM_I12_J17;
-	state->m_fecRsPlen = 204 * 8;	/* fecRsPlen  annex A */
-	state->m_fecRsPrescale = 1;
-
-	state->m_sqiSpeed = DRXK_DVBT_SQI_SPEED_MEDIUM;
-	state->m_agcFastClipCtrlDelay = 0;
-
-	state->m_GPIOCfg = (ulGPIOCfg);
-
-	state->m_bPowerDown = false;
-	state->m_currentPowerMode = DRX_POWER_DOWN;
-
-	state->m_rfmirror = (ulRfMirror == 0);
-	state->m_IfAgcPol = false;
-	return 0;
-}
-
-static int DRXX_Open(struct drxk_state *state)
-{
-	int status = 0;
-	u32 jtag = 0;
-	u16 bid = 0;
-	u16 key = 0;
-
-	dprintk(1, "\n");
-	/* stop lock indicator process */
-	status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
-	if (status < 0)
-		goto error;
-	/* Check device id */
-	status = read16(state, SIO_TOP_COMM_KEY__A, &key);
-	if (status < 0)
-		goto error;
-	status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY);
-	if (status < 0)
-		goto error;
-	status = read32(state, SIO_TOP_JTAGID_LO__A, &jtag);
-	if (status < 0)
-		goto error;
-	status = read16(state, SIO_PDR_UIO_IN_HI__A, &bid);
-	if (status < 0)
-		goto error;
-	status = write16(state, SIO_TOP_COMM_KEY__A, key);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int GetDeviceCapabilities(struct drxk_state *state)
-{
-	u16 sioPdrOhwCfg = 0;
-	u32 sioTopJtagidLo = 0;
-	int status;
-	const char *spin = "";
-
-	dprintk(1, "\n");
-
-	/* driver 0.9.0 */
-	/* stop lock indicator process */
-	status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
-	if (status < 0)
-		goto error;
-	status = write16(state, SIO_TOP_COMM_KEY__A, 0xFABA);
-	if (status < 0)
-		goto error;
-	status = read16(state, SIO_PDR_OHW_CFG__A, &sioPdrOhwCfg);
-	if (status < 0)
-		goto error;
-	status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000);
-	if (status < 0)
-		goto error;
-
-	switch ((sioPdrOhwCfg & SIO_PDR_OHW_CFG_FREF_SEL__M)) {
-	case 0:
-		/* ignore (bypass ?) */
-		break;
-	case 1:
-		/* 27 MHz */
-		state->m_oscClockFreq = 27000;
-		break;
-	case 2:
-		/* 20.25 MHz */
-		state->m_oscClockFreq = 20250;
-		break;
-	case 3:
-		/* 4 MHz */
-		state->m_oscClockFreq = 20250;
-		break;
-	default:
-		printk(KERN_ERR "drxk: Clock Frequency is unkonwn\n");
-		return -EINVAL;
-	}
-	/*
-		Determine device capabilities
-		Based on pinning v14
-		*/
-	status = read32(state, SIO_TOP_JTAGID_LO__A, &sioTopJtagidLo);
-	if (status < 0)
-		goto error;
-
-	printk(KERN_INFO "drxk: status = 0x%08x\n", sioTopJtagidLo);
-
-	/* driver 0.9.0 */
-	switch ((sioTopJtagidLo >> 29) & 0xF) {
-	case 0:
-		state->m_deviceSpin = DRXK_SPIN_A1;
-		spin = "A1";
-		break;
-	case 2:
-		state->m_deviceSpin = DRXK_SPIN_A2;
-		spin = "A2";
-		break;
-	case 3:
-		state->m_deviceSpin = DRXK_SPIN_A3;
-		spin = "A3";
-		break;
-	default:
-		state->m_deviceSpin = DRXK_SPIN_UNKNOWN;
-		status = -EINVAL;
-		printk(KERN_ERR "drxk: Spin %d unknown\n",
-		       (sioTopJtagidLo >> 29) & 0xF);
-		goto error2;
-	}
-	switch ((sioTopJtagidLo >> 12) & 0xFF) {
-	case 0x13:
-		/* typeId = DRX3913K_TYPE_ID */
-		state->m_hasLNA = false;
-		state->m_hasOOB = false;
-		state->m_hasATV = false;
-		state->m_hasAudio = false;
-		state->m_hasDVBT = true;
-		state->m_hasDVBC = true;
-		state->m_hasSAWSW = true;
-		state->m_hasGPIO2 = false;
-		state->m_hasGPIO1 = false;
-		state->m_hasIRQN = false;
-		break;
-	case 0x15:
-		/* typeId = DRX3915K_TYPE_ID */
-		state->m_hasLNA = false;
-		state->m_hasOOB = false;
-		state->m_hasATV = true;
-		state->m_hasAudio = false;
-		state->m_hasDVBT = true;
-		state->m_hasDVBC = false;
-		state->m_hasSAWSW = true;
-		state->m_hasGPIO2 = true;
-		state->m_hasGPIO1 = true;
-		state->m_hasIRQN = false;
-		break;
-	case 0x16:
-		/* typeId = DRX3916K_TYPE_ID */
-		state->m_hasLNA = false;
-		state->m_hasOOB = false;
-		state->m_hasATV = true;
-		state->m_hasAudio = false;
-		state->m_hasDVBT = true;
-		state->m_hasDVBC = false;
-		state->m_hasSAWSW = true;
-		state->m_hasGPIO2 = true;
-		state->m_hasGPIO1 = true;
-		state->m_hasIRQN = false;
-		break;
-	case 0x18:
-		/* typeId = DRX3918K_TYPE_ID */
-		state->m_hasLNA = false;
-		state->m_hasOOB = false;
-		state->m_hasATV = true;
-		state->m_hasAudio = true;
-		state->m_hasDVBT = true;
-		state->m_hasDVBC = false;
-		state->m_hasSAWSW = true;
-		state->m_hasGPIO2 = true;
-		state->m_hasGPIO1 = true;
-		state->m_hasIRQN = false;
-		break;
-	case 0x21:
-		/* typeId = DRX3921K_TYPE_ID */
-		state->m_hasLNA = false;
-		state->m_hasOOB = false;
-		state->m_hasATV = true;
-		state->m_hasAudio = true;
-		state->m_hasDVBT = true;
-		state->m_hasDVBC = true;
-		state->m_hasSAWSW = true;
-		state->m_hasGPIO2 = true;
-		state->m_hasGPIO1 = true;
-		state->m_hasIRQN = false;
-		break;
-	case 0x23:
-		/* typeId = DRX3923K_TYPE_ID */
-		state->m_hasLNA = false;
-		state->m_hasOOB = false;
-		state->m_hasATV = true;
-		state->m_hasAudio = true;
-		state->m_hasDVBT = true;
-		state->m_hasDVBC = true;
-		state->m_hasSAWSW = true;
-		state->m_hasGPIO2 = true;
-		state->m_hasGPIO1 = true;
-		state->m_hasIRQN = false;
-		break;
-	case 0x25:
-		/* typeId = DRX3925K_TYPE_ID */
-		state->m_hasLNA = false;
-		state->m_hasOOB = false;
-		state->m_hasATV = true;
-		state->m_hasAudio = true;
-		state->m_hasDVBT = true;
-		state->m_hasDVBC = true;
-		state->m_hasSAWSW = true;
-		state->m_hasGPIO2 = true;
-		state->m_hasGPIO1 = true;
-		state->m_hasIRQN = false;
-		break;
-	case 0x26:
-		/* typeId = DRX3926K_TYPE_ID */
-		state->m_hasLNA = false;
-		state->m_hasOOB = false;
-		state->m_hasATV = true;
-		state->m_hasAudio = false;
-		state->m_hasDVBT = true;
-		state->m_hasDVBC = true;
-		state->m_hasSAWSW = true;
-		state->m_hasGPIO2 = true;
-		state->m_hasGPIO1 = true;
-		state->m_hasIRQN = false;
-		break;
-	default:
-		printk(KERN_ERR "drxk: DeviceID 0x%02x not supported\n",
-			((sioTopJtagidLo >> 12) & 0xFF));
-		status = -EINVAL;
-		goto error2;
-	}
-
-	printk(KERN_INFO
-	       "drxk: detected a drx-39%02xk, spin %s, xtal %d.%03d MHz\n",
-	       ((sioTopJtagidLo >> 12) & 0xFF), spin,
-	       state->m_oscClockFreq / 1000,
-	       state->m_oscClockFreq % 1000);
-
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-
-error2:
-	return status;
-}
-
-static int HI_Command(struct drxk_state *state, u16 cmd, u16 *pResult)
-{
-	int status;
-	bool powerdown_cmd;
-
-	dprintk(1, "\n");
-
-	/* Write command */
-	status = write16(state, SIO_HI_RA_RAM_CMD__A, cmd);
-	if (status < 0)
-		goto error;
-	if (cmd == SIO_HI_RA_RAM_CMD_RESET)
-		msleep(1);
-
-	powerdown_cmd =
-	    (bool) ((cmd == SIO_HI_RA_RAM_CMD_CONFIG) &&
-		    ((state->m_HICfgCtrl) &
-		     SIO_HI_RA_RAM_PAR_5_CFG_SLEEP__M) ==
-		    SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ);
-	if (powerdown_cmd == false) {
-		/* Wait until command rdy */
-		u32 retryCount = 0;
-		u16 waitCmd;
-
-		do {
-			msleep(1);
-			retryCount += 1;
-			status = read16(state, SIO_HI_RA_RAM_CMD__A,
-					  &waitCmd);
-		} while ((status < 0) && (retryCount < DRXK_MAX_RETRIES)
-			 && (waitCmd != 0));
-		if (status < 0)
-			goto error;
-		status = read16(state, SIO_HI_RA_RAM_RES__A, pResult);
-	}
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-
-	return status;
-}
-
-static int HI_CfgCommand(struct drxk_state *state)
-{
-	int status;
-
-	dprintk(1, "\n");
-
-	mutex_lock(&state->mutex);
-
-	status = write16(state, SIO_HI_RA_RAM_PAR_6__A, state->m_HICfgTimeout);
-	if (status < 0)
-		goto error;
-	status = write16(state, SIO_HI_RA_RAM_PAR_5__A, state->m_HICfgCtrl);
-	if (status < 0)
-		goto error;
-	status = write16(state, SIO_HI_RA_RAM_PAR_4__A, state->m_HICfgWakeUpKey);
-	if (status < 0)
-		goto error;
-	status = write16(state, SIO_HI_RA_RAM_PAR_3__A, state->m_HICfgBridgeDelay);
-	if (status < 0)
-		goto error;
-	status = write16(state, SIO_HI_RA_RAM_PAR_2__A, state->m_HICfgTimingDiv);
-	if (status < 0)
-		goto error;
-	status = write16(state, SIO_HI_RA_RAM_PAR_1__A, SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY);
-	if (status < 0)
-		goto error;
-	status = HI_Command(state, SIO_HI_RA_RAM_CMD_CONFIG, 0);
-	if (status < 0)
-		goto error;
-
-	state->m_HICfgCtrl &= ~SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ;
-error:
-	mutex_unlock(&state->mutex);
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int InitHI(struct drxk_state *state)
-{
-	dprintk(1, "\n");
-
-	state->m_HICfgWakeUpKey = (state->demod_address << 1);
-	state->m_HICfgTimeout = 0x96FF;
-	/* port/bridge/power down ctrl */
-	state->m_HICfgCtrl = SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE;
-
-	return HI_CfgCommand(state);
-}
-
-static int MPEGTSConfigurePins(struct drxk_state *state, bool mpegEnable)
-{
-	int status = -1;
-	u16 sioPdrMclkCfg = 0;
-	u16 sioPdrMdxCfg = 0;
-	u16 err_cfg = 0;
-
-	dprintk(1, ": mpeg %s, %s mode\n",
-		mpegEnable ? "enable" : "disable",
-		state->m_enableParallel ? "parallel" : "serial");
-
-	/* stop lock indicator process */
-	status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
-	if (status < 0)
-		goto error;
-
-	/*  MPEG TS pad configuration */
-	status = write16(state, SIO_TOP_COMM_KEY__A, 0xFABA);
-	if (status < 0)
-		goto error;
-
-	if (mpegEnable == false) {
-		/*  Set MPEG TS pads to inputmode */
-		status = write16(state, SIO_PDR_MSTRT_CFG__A, 0x0000);
-		if (status < 0)
-			goto error;
-		status = write16(state, SIO_PDR_MERR_CFG__A, 0x0000);
-		if (status < 0)
-			goto error;
-		status = write16(state, SIO_PDR_MCLK_CFG__A, 0x0000);
-		if (status < 0)
-			goto error;
-		status = write16(state, SIO_PDR_MVAL_CFG__A, 0x0000);
-		if (status < 0)
-			goto error;
-		status = write16(state, SIO_PDR_MD0_CFG__A, 0x0000);
-		if (status < 0)
-			goto error;
-		status = write16(state, SIO_PDR_MD1_CFG__A, 0x0000);
-		if (status < 0)
-			goto error;
-		status = write16(state, SIO_PDR_MD2_CFG__A, 0x0000);
-		if (status < 0)
-			goto error;
-		status = write16(state, SIO_PDR_MD3_CFG__A, 0x0000);
-		if (status < 0)
-			goto error;
-		status = write16(state, SIO_PDR_MD4_CFG__A, 0x0000);
-		if (status < 0)
-			goto error;
-		status = write16(state, SIO_PDR_MD5_CFG__A, 0x0000);
-		if (status < 0)
-			goto error;
-		status = write16(state, SIO_PDR_MD6_CFG__A, 0x0000);
-		if (status < 0)
-			goto error;
-		status = write16(state, SIO_PDR_MD7_CFG__A, 0x0000);
-		if (status < 0)
-			goto error;
-	} else {
-		/* Enable MPEG output */
-		sioPdrMdxCfg =
-			((state->m_TSDataStrength <<
-			SIO_PDR_MD0_CFG_DRIVE__B) | 0x0003);
-		sioPdrMclkCfg = ((state->m_TSClockkStrength <<
-					SIO_PDR_MCLK_CFG_DRIVE__B) |
-					0x0003);
-
-		status = write16(state, SIO_PDR_MSTRT_CFG__A, sioPdrMdxCfg);
-		if (status < 0)
-			goto error;
-
-		if (state->enable_merr_cfg)
-			err_cfg = sioPdrMdxCfg;
-
-		status = write16(state, SIO_PDR_MERR_CFG__A, err_cfg);
-		if (status < 0)
-			goto error;
-		status = write16(state, SIO_PDR_MVAL_CFG__A, err_cfg);
-		if (status < 0)
-			goto error;
-
-		if (state->m_enableParallel == true) {
-			/* paralel -> enable MD1 to MD7 */
-			status = write16(state, SIO_PDR_MD1_CFG__A, sioPdrMdxCfg);
-			if (status < 0)
-				goto error;
-			status = write16(state, SIO_PDR_MD2_CFG__A, sioPdrMdxCfg);
-			if (status < 0)
-				goto error;
-			status = write16(state, SIO_PDR_MD3_CFG__A, sioPdrMdxCfg);
-			if (status < 0)
-				goto error;
-			status = write16(state, SIO_PDR_MD4_CFG__A, sioPdrMdxCfg);
-			if (status < 0)
-				goto error;
-			status = write16(state, SIO_PDR_MD5_CFG__A, sioPdrMdxCfg);
-			if (status < 0)
-				goto error;
-			status = write16(state, SIO_PDR_MD6_CFG__A, sioPdrMdxCfg);
-			if (status < 0)
-				goto error;
-			status = write16(state, SIO_PDR_MD7_CFG__A, sioPdrMdxCfg);
-			if (status < 0)
-				goto error;
-		} else {
-			sioPdrMdxCfg = ((state->m_TSDataStrength <<
-						SIO_PDR_MD0_CFG_DRIVE__B)
-					| 0x0003);
-			/* serial -> disable MD1 to MD7 */
-			status = write16(state, SIO_PDR_MD1_CFG__A, 0x0000);
-			if (status < 0)
-				goto error;
-			status = write16(state, SIO_PDR_MD2_CFG__A, 0x0000);
-			if (status < 0)
-				goto error;
-			status = write16(state, SIO_PDR_MD3_CFG__A, 0x0000);
-			if (status < 0)
-				goto error;
-			status = write16(state, SIO_PDR_MD4_CFG__A, 0x0000);
-			if (status < 0)
-				goto error;
-			status = write16(state, SIO_PDR_MD5_CFG__A, 0x0000);
-			if (status < 0)
-				goto error;
-			status = write16(state, SIO_PDR_MD6_CFG__A, 0x0000);
-			if (status < 0)
-				goto error;
-			status = write16(state, SIO_PDR_MD7_CFG__A, 0x0000);
-			if (status < 0)
-				goto error;
-		}
-		status = write16(state, SIO_PDR_MCLK_CFG__A, sioPdrMclkCfg);
-		if (status < 0)
-			goto error;
-		status = write16(state, SIO_PDR_MD0_CFG__A, sioPdrMdxCfg);
-		if (status < 0)
-			goto error;
-	}
-	/*  Enable MB output over MPEG pads and ctl input */
-	status = write16(state, SIO_PDR_MON_CFG__A, 0x0000);
-	if (status < 0)
-		goto error;
-	/*  Write nomagic word to enable pdr reg write */
-	status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int MPEGTSDisable(struct drxk_state *state)
-{
-	dprintk(1, "\n");
-
-	return MPEGTSConfigurePins(state, false);
-}
-
-static int BLChainCmd(struct drxk_state *state,
-		      u16 romOffset, u16 nrOfElements, u32 timeOut)
-{
-	u16 blStatus = 0;
-	int status;
-	unsigned long end;
-
-	dprintk(1, "\n");
-	mutex_lock(&state->mutex);
-	status = write16(state, SIO_BL_MODE__A, SIO_BL_MODE_CHAIN);
-	if (status < 0)
-		goto error;
-	status = write16(state, SIO_BL_CHAIN_ADDR__A, romOffset);
-	if (status < 0)
-		goto error;
-	status = write16(state, SIO_BL_CHAIN_LEN__A, nrOfElements);
-	if (status < 0)
-		goto error;
-	status = write16(state, SIO_BL_ENABLE__A, SIO_BL_ENABLE_ON);
-	if (status < 0)
-		goto error;
-
-	end = jiffies + msecs_to_jiffies(timeOut);
-	do {
-		msleep(1);
-		status = read16(state, SIO_BL_STATUS__A, &blStatus);
-		if (status < 0)
-			goto error;
-	} while ((blStatus == 0x1) &&
-			((time_is_after_jiffies(end))));
-
-	if (blStatus == 0x1) {
-		printk(KERN_ERR "drxk: SIO not ready\n");
-		status = -EINVAL;
-		goto error2;
-	}
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-error2:
-	mutex_unlock(&state->mutex);
-	return status;
-}
-
-
-static int DownloadMicrocode(struct drxk_state *state,
-			     const u8 pMCImage[], u32 Length)
-{
-	const u8 *pSrc = pMCImage;
-	u32 Address;
-	u16 nBlocks;
-	u16 BlockSize;
-	u32 offset = 0;
-	u32 i;
-	int status = 0;
-
-	dprintk(1, "\n");
-
-	/* down the drain (we don't care about MAGIC_WORD) */
-#if 0
-	/* For future reference */
-	Drain = (pSrc[0] << 8) | pSrc[1];
-#endif
-	pSrc += sizeof(u16);
-	offset += sizeof(u16);
-	nBlocks = (pSrc[0] << 8) | pSrc[1];
-	pSrc += sizeof(u16);
-	offset += sizeof(u16);
-
-	for (i = 0; i < nBlocks; i += 1) {
-		Address = (pSrc[0] << 24) | (pSrc[1] << 16) |
-		    (pSrc[2] << 8) | pSrc[3];
-		pSrc += sizeof(u32);
-		offset += sizeof(u32);
-
-		BlockSize = ((pSrc[0] << 8) | pSrc[1]) * sizeof(u16);
-		pSrc += sizeof(u16);
-		offset += sizeof(u16);
-
-#if 0
-		/* For future reference */
-		Flags = (pSrc[0] << 8) | pSrc[1];
-#endif
-		pSrc += sizeof(u16);
-		offset += sizeof(u16);
-
-#if 0
-		/* For future reference */
-		BlockCRC = (pSrc[0] << 8) | pSrc[1];
-#endif
-		pSrc += sizeof(u16);
-		offset += sizeof(u16);
-
-		if (offset + BlockSize > Length) {
-			printk(KERN_ERR "drxk: Firmware is corrupted.\n");
-			return -EINVAL;
-		}
-
-		status = write_block(state, Address, BlockSize, pSrc);
-		if (status < 0) {
-			printk(KERN_ERR "drxk: Error %d while loading firmware\n", status);
-			break;
-		}
-		pSrc += BlockSize;
-		offset += BlockSize;
-	}
-	return status;
-}
-
-static int DVBTEnableOFDMTokenRing(struct drxk_state *state, bool enable)
-{
-	int status;
-	u16 data = 0;
-	u16 desiredCtrl = SIO_OFDM_SH_OFDM_RING_ENABLE_ON;
-	u16 desiredStatus = SIO_OFDM_SH_OFDM_RING_STATUS_ENABLED;
-	unsigned long end;
-
-	dprintk(1, "\n");
-
-	if (enable == false) {
-		desiredCtrl = SIO_OFDM_SH_OFDM_RING_ENABLE_OFF;
-		desiredStatus = SIO_OFDM_SH_OFDM_RING_STATUS_DOWN;
-	}
-
-	status = read16(state, SIO_OFDM_SH_OFDM_RING_STATUS__A, &data);
-	if (status >= 0 && data == desiredStatus) {
-		/* tokenring already has correct status */
-		return status;
-	}
-	/* Disable/enable dvbt tokenring bridge   */
-	status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, desiredCtrl);
-
-	end = jiffies + msecs_to_jiffies(DRXK_OFDM_TR_SHUTDOWN_TIMEOUT);
-	do {
-		status = read16(state, SIO_OFDM_SH_OFDM_RING_STATUS__A, &data);
-		if ((status >= 0 && data == desiredStatus) || time_is_after_jiffies(end))
-			break;
-		msleep(1);
-	} while (1);
-	if (data != desiredStatus) {
-		printk(KERN_ERR "drxk: SIO not ready\n");
-		return -EINVAL;
-	}
-	return status;
-}
-
-static int MPEGTSStop(struct drxk_state *state)
-{
-	int status = 0;
-	u16 fecOcSncMode = 0;
-	u16 fecOcIprMode = 0;
-
-	dprintk(1, "\n");
-
-	/* Gracefull shutdown (byte boundaries) */
-	status = read16(state, FEC_OC_SNC_MODE__A, &fecOcSncMode);
-	if (status < 0)
-		goto error;
-	fecOcSncMode |= FEC_OC_SNC_MODE_SHUTDOWN__M;
-	status = write16(state, FEC_OC_SNC_MODE__A, fecOcSncMode);
-	if (status < 0)
-		goto error;
-
-	/* Suppress MCLK during absence of data */
-	status = read16(state, FEC_OC_IPR_MODE__A, &fecOcIprMode);
-	if (status < 0)
-		goto error;
-	fecOcIprMode |= FEC_OC_IPR_MODE_MCLK_DIS_DAT_ABS__M;
-	status = write16(state, FEC_OC_IPR_MODE__A, fecOcIprMode);
-
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-
-	return status;
-}
-
-static int scu_command(struct drxk_state *state,
-		       u16 cmd, u8 parameterLen,
-		       u16 *parameter, u8 resultLen, u16 *result)
-{
-#if (SCU_RAM_PARAM_0__A - SCU_RAM_PARAM_15__A) != 15
-#error DRXK register mapping no longer compatible with this routine!
-#endif
-	u16 curCmd = 0;
-	int status = -EINVAL;
-	unsigned long end;
-	u8 buffer[34];
-	int cnt = 0, ii;
-	const char *p;
-	char errname[30];
-
-	dprintk(1, "\n");
-
-	if ((cmd == 0) || ((parameterLen > 0) && (parameter == NULL)) ||
-	    ((resultLen > 0) && (result == NULL))) {
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-		return status;
-	}
-
-	mutex_lock(&state->mutex);
-
-	/* assume that the command register is ready
-		since it is checked afterwards */
-	for (ii = parameterLen - 1; ii >= 0; ii -= 1) {
-		buffer[cnt++] = (parameter[ii] & 0xFF);
-		buffer[cnt++] = ((parameter[ii] >> 8) & 0xFF);
-	}
-	buffer[cnt++] = (cmd & 0xFF);
-	buffer[cnt++] = ((cmd >> 8) & 0xFF);
-
-	write_block(state, SCU_RAM_PARAM_0__A -
-			(parameterLen - 1), cnt, buffer);
-	/* Wait until SCU has processed command */
-	end = jiffies + msecs_to_jiffies(DRXK_MAX_WAITTIME);
-	do {
-		msleep(1);
-		status = read16(state, SCU_RAM_COMMAND__A, &curCmd);
-		if (status < 0)
-			goto error;
-	} while (!(curCmd == DRX_SCU_READY) && (time_is_after_jiffies(end)));
-	if (curCmd != DRX_SCU_READY) {
-		printk(KERN_ERR "drxk: SCU not ready\n");
-		status = -EIO;
-		goto error2;
-	}
-	/* read results */
-	if ((resultLen > 0) && (result != NULL)) {
-		s16 err;
-		int ii;
-
-		for (ii = resultLen - 1; ii >= 0; ii -= 1) {
-			status = read16(state, SCU_RAM_PARAM_0__A - ii, &result[ii]);
-			if (status < 0)
-				goto error;
-		}
-
-		/* Check if an error was reported by SCU */
-		err = (s16)result[0];
-		if (err >= 0)
-			goto error;
-
-		/* check for the known error codes */
-		switch (err) {
-		case SCU_RESULT_UNKCMD:
-			p = "SCU_RESULT_UNKCMD";
-			break;
-		case SCU_RESULT_UNKSTD:
-			p = "SCU_RESULT_UNKSTD";
-			break;
-		case SCU_RESULT_SIZE:
-			p = "SCU_RESULT_SIZE";
-			break;
-		case SCU_RESULT_INVPAR:
-			p = "SCU_RESULT_INVPAR";
-			break;
-		default: /* Other negative values are errors */
-			sprintf(errname, "ERROR: %d\n", err);
-			p = errname;
-		}
-		printk(KERN_ERR "drxk: %s while sending cmd 0x%04x with params:", p, cmd);
-		print_hex_dump_bytes("drxk: ", DUMP_PREFIX_NONE, buffer, cnt);
-		status = -EINVAL;
-		goto error2;
-	}
-
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-error2:
-	mutex_unlock(&state->mutex);
-	return status;
-}
-
-static int SetIqmAf(struct drxk_state *state, bool active)
-{
-	u16 data = 0;
-	int status;
-
-	dprintk(1, "\n");
-
-	/* Configure IQM */
-	status = read16(state, IQM_AF_STDBY__A, &data);
-	if (status < 0)
-		goto error;
-
-	if (!active) {
-		data |= (IQM_AF_STDBY_STDBY_ADC_STANDBY
-				| IQM_AF_STDBY_STDBY_AMP_STANDBY
-				| IQM_AF_STDBY_STDBY_PD_STANDBY
-				| IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY
-				| IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY);
-	} else {
-		data &= ((~IQM_AF_STDBY_STDBY_ADC_STANDBY)
-				& (~IQM_AF_STDBY_STDBY_AMP_STANDBY)
-				& (~IQM_AF_STDBY_STDBY_PD_STANDBY)
-				& (~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY)
-				& (~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY)
-			);
-	}
-	status = write16(state, IQM_AF_STDBY__A, data);
-
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int CtrlPowerMode(struct drxk_state *state, enum DRXPowerMode *mode)
-{
-	int status = 0;
-	u16 sioCcPwdMode = 0;
-
-	dprintk(1, "\n");
-
-	/* Check arguments */
-	if (mode == NULL)
-		return -EINVAL;
-
-	switch (*mode) {
-	case DRX_POWER_UP:
-		sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_NONE;
-		break;
-	case DRXK_POWER_DOWN_OFDM:
-		sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_OFDM;
-		break;
-	case DRXK_POWER_DOWN_CORE:
-		sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_CLOCK;
-		break;
-	case DRXK_POWER_DOWN_PLL:
-		sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_PLL;
-		break;
-	case DRX_POWER_DOWN:
-		sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_OSC;
-		break;
-	default:
-		/* Unknow sleep mode */
-		return -EINVAL;
-	}
-
-	/* If already in requested power mode, do nothing */
-	if (state->m_currentPowerMode == *mode)
-		return 0;
-
-	/* For next steps make sure to start from DRX_POWER_UP mode */
-	if (state->m_currentPowerMode != DRX_POWER_UP) {
-		status = PowerUpDevice(state);
-		if (status < 0)
-			goto error;
-		status = DVBTEnableOFDMTokenRing(state, true);
-		if (status < 0)
-			goto error;
-	}
-
-	if (*mode == DRX_POWER_UP) {
-		/* Restore analog & pin configuartion */
-	} else {
-		/* Power down to requested mode */
-		/* Backup some register settings */
-		/* Set pins with possible pull-ups connected
-		   to them in input mode */
-		/* Analog power down */
-		/* ADC power down */
-		/* Power down device */
-		/* stop all comm_exec */
-		/* Stop and power down previous standard */
-		switch (state->m_OperationMode) {
-		case OM_DVBT:
-			status = MPEGTSStop(state);
-			if (status < 0)
-				goto error;
-			status = PowerDownDVBT(state, false);
-			if (status < 0)
-				goto error;
-			break;
-		case OM_QAM_ITU_A:
-		case OM_QAM_ITU_C:
-			status = MPEGTSStop(state);
-			if (status < 0)
-				goto error;
-			status = PowerDownQAM(state);
-			if (status < 0)
-				goto error;
-			break;
-		default:
-			break;
-		}
-		status = DVBTEnableOFDMTokenRing(state, false);
-		if (status < 0)
-			goto error;
-		status = write16(state, SIO_CC_PWD_MODE__A, sioCcPwdMode);
-		if (status < 0)
-			goto error;
-		status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY);
-		if (status < 0)
-			goto error;
-
-		if (*mode != DRXK_POWER_DOWN_OFDM) {
-			state->m_HICfgCtrl |=
-				SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ;
-			status = HI_CfgCommand(state);
-			if (status < 0)
-				goto error;
-		}
-	}
-	state->m_currentPowerMode = *mode;
-
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-
-	return status;
-}
-
-static int PowerDownDVBT(struct drxk_state *state, bool setPowerMode)
-{
-	enum DRXPowerMode powerMode = DRXK_POWER_DOWN_OFDM;
-	u16 cmdResult = 0;
-	u16 data = 0;
-	int status;
-
-	dprintk(1, "\n");
-
-	status = read16(state, SCU_COMM_EXEC__A, &data);
-	if (status < 0)
-		goto error;
-	if (data == SCU_COMM_EXEC_ACTIVE) {
-		/* Send OFDM stop command */
-		status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_STOP, 0, NULL, 1, &cmdResult);
-		if (status < 0)
-			goto error;
-		/* Send OFDM reset command */
-		status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_RESET, 0, NULL, 1, &cmdResult);
-		if (status < 0)
-			goto error;
-	}
-
-	/* Reset datapath for OFDM, processors first */
-	status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP);
-	if (status < 0)
-		goto error;
-	status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP);
-	if (status < 0)
-		goto error;
-
-	/* powerdown AFE                   */
-	status = SetIqmAf(state, false);
-	if (status < 0)
-		goto error;
-
-	/* powerdown to OFDM mode          */
-	if (setPowerMode) {
-		status = CtrlPowerMode(state, &powerMode);
-		if (status < 0)
-			goto error;
-	}
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int SetOperationMode(struct drxk_state *state,
-			    enum OperationMode oMode)
-{
-	int status = 0;
-
-	dprintk(1, "\n");
-	/*
-	   Stop and power down previous standard
-	   TODO investigate total power down instead of partial
-	   power down depending on "previous" standard.
-	 */
-
-	/* disable HW lock indicator */
-	status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
-	if (status < 0)
-		goto error;
-
-	/* Device is already at the required mode */
-	if (state->m_OperationMode == oMode)
-		return 0;
-
-	switch (state->m_OperationMode) {
-		/* OM_NONE was added for start up */
-	case OM_NONE:
-		break;
-	case OM_DVBT:
-		status = MPEGTSStop(state);
-		if (status < 0)
-			goto error;
-		status = PowerDownDVBT(state, true);
-		if (status < 0)
-			goto error;
-		state->m_OperationMode = OM_NONE;
-		break;
-	case OM_QAM_ITU_A:	/* fallthrough */
-	case OM_QAM_ITU_C:
-		status = MPEGTSStop(state);
-		if (status < 0)
-			goto error;
-		status = PowerDownQAM(state);
-		if (status < 0)
-			goto error;
-		state->m_OperationMode = OM_NONE;
-		break;
-	case OM_QAM_ITU_B:
-	default:
-		status = -EINVAL;
-		goto error;
-	}
-
-	/*
-		Power up new standard
-		*/
-	switch (oMode) {
-	case OM_DVBT:
-		dprintk(1, ": DVB-T\n");
-		state->m_OperationMode = oMode;
-		status = SetDVBTStandard(state, oMode);
-		if (status < 0)
-			goto error;
-		break;
-	case OM_QAM_ITU_A:	/* fallthrough */
-	case OM_QAM_ITU_C:
-		dprintk(1, ": DVB-C Annex %c\n",
-			(state->m_OperationMode == OM_QAM_ITU_A) ? 'A' : 'C');
-		state->m_OperationMode = oMode;
-		status = SetQAMStandard(state, oMode);
-		if (status < 0)
-			goto error;
-		break;
-	case OM_QAM_ITU_B:
-	default:
-		status = -EINVAL;
-	}
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int Start(struct drxk_state *state, s32 offsetFreq,
-		 s32 IntermediateFrequency)
-{
-	int status = -EINVAL;
-
-	u16 IFreqkHz;
-	s32 OffsetkHz = offsetFreq / 1000;
-
-	dprintk(1, "\n");
-	if (state->m_DrxkState != DRXK_STOPPED &&
-		state->m_DrxkState != DRXK_DTV_STARTED)
-		goto error;
-
-	state->m_bMirrorFreqSpect = (state->props.inversion == INVERSION_ON);
-
-	if (IntermediateFrequency < 0) {
-		state->m_bMirrorFreqSpect = !state->m_bMirrorFreqSpect;
-		IntermediateFrequency = -IntermediateFrequency;
-	}
-
-	switch (state->m_OperationMode) {
-	case OM_QAM_ITU_A:
-	case OM_QAM_ITU_C:
-		IFreqkHz = (IntermediateFrequency / 1000);
-		status = SetQAM(state, IFreqkHz, OffsetkHz);
-		if (status < 0)
-			goto error;
-		state->m_DrxkState = DRXK_DTV_STARTED;
-		break;
-	case OM_DVBT:
-		IFreqkHz = (IntermediateFrequency / 1000);
-		status = MPEGTSStop(state);
-		if (status < 0)
-			goto error;
-		status = SetDVBT(state, IFreqkHz, OffsetkHz);
-		if (status < 0)
-			goto error;
-		status = DVBTStart(state);
-		if (status < 0)
-			goto error;
-		state->m_DrxkState = DRXK_DTV_STARTED;
-		break;
-	default:
-		break;
-	}
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int ShutDown(struct drxk_state *state)
-{
-	dprintk(1, "\n");
-
-	MPEGTSStop(state);
-	return 0;
-}
-
-static int GetLockStatus(struct drxk_state *state, u32 *pLockStatus,
-			 u32 Time)
-{
-	int status = -EINVAL;
-
-	dprintk(1, "\n");
-
-	if (pLockStatus == NULL)
-		goto error;
-
-	*pLockStatus = NOT_LOCKED;
-
-	/* define the SCU command code */
-	switch (state->m_OperationMode) {
-	case OM_QAM_ITU_A:
-	case OM_QAM_ITU_B:
-	case OM_QAM_ITU_C:
-		status = GetQAMLockStatus(state, pLockStatus);
-		break;
-	case OM_DVBT:
-		status = GetDVBTLockStatus(state, pLockStatus);
-		break;
-	default:
-		break;
-	}
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int MPEGTSStart(struct drxk_state *state)
-{
-	int status;
-
-	u16 fecOcSncMode = 0;
-
-	/* Allow OC to sync again */
-	status = read16(state, FEC_OC_SNC_MODE__A, &fecOcSncMode);
-	if (status < 0)
-		goto error;
-	fecOcSncMode &= ~FEC_OC_SNC_MODE_SHUTDOWN__M;
-	status = write16(state, FEC_OC_SNC_MODE__A, fecOcSncMode);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_OC_SNC_UNLOCK__A, 1);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int MPEGTSDtoInit(struct drxk_state *state)
-{
-	int status;
-
-	dprintk(1, "\n");
-
-	/* Rate integration settings */
-	status = write16(state, FEC_OC_RCN_CTL_STEP_LO__A, 0x0000);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_OC_RCN_CTL_STEP_HI__A, 0x000C);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_OC_RCN_GAIN__A, 0x000A);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_OC_AVR_PARM_A__A, 0x0008);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_OC_AVR_PARM_B__A, 0x0006);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_OC_TMD_HI_MARGIN__A, 0x0680);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_OC_TMD_LO_MARGIN__A, 0x0080);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_OC_TMD_COUNT__A, 0x03F4);
-	if (status < 0)
-		goto error;
-
-	/* Additional configuration */
-	status = write16(state, FEC_OC_OCR_INVERT__A, 0);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_OC_SNC_LWM__A, 2);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_OC_SNC_HWM__A, 12);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-
-	return status;
-}
-
-static int MPEGTSDtoSetup(struct drxk_state *state,
-			  enum OperationMode oMode)
-{
-	int status;
-
-	u16 fecOcRegMode = 0;	/* FEC_OC_MODE       register value */
-	u16 fecOcRegIprMode = 0;	/* FEC_OC_IPR_MODE   register value */
-	u16 fecOcDtoMode = 0;	/* FEC_OC_IPR_INVERT register value */
-	u16 fecOcFctMode = 0;	/* FEC_OC_IPR_INVERT register value */
-	u16 fecOcDtoPeriod = 2;	/* FEC_OC_IPR_INVERT register value */
-	u16 fecOcDtoBurstLen = 188;	/* FEC_OC_IPR_INVERT register value */
-	u32 fecOcRcnCtlRate = 0;	/* FEC_OC_IPR_INVERT register value */
-	u16 fecOcTmdMode = 0;
-	u16 fecOcTmdIntUpdRate = 0;
-	u32 maxBitRate = 0;
-	bool staticCLK = false;
-
-	dprintk(1, "\n");
-
-	/* Check insertion of the Reed-Solomon parity bytes */
-	status = read16(state, FEC_OC_MODE__A, &fecOcRegMode);
-	if (status < 0)
-		goto error;
-	status = read16(state, FEC_OC_IPR_MODE__A, &fecOcRegIprMode);
-	if (status < 0)
-		goto error;
-	fecOcRegMode &= (~FEC_OC_MODE_PARITY__M);
-	fecOcRegIprMode &= (~FEC_OC_IPR_MODE_MVAL_DIS_PAR__M);
-	if (state->m_insertRSByte == true) {
-		/* enable parity symbol forward */
-		fecOcRegMode |= FEC_OC_MODE_PARITY__M;
-		/* MVAL disable during parity bytes */
-		fecOcRegIprMode |= FEC_OC_IPR_MODE_MVAL_DIS_PAR__M;
-		/* TS burst length to 204 */
-		fecOcDtoBurstLen = 204;
-	}
-
-	/* Check serial or parrallel output */
-	fecOcRegIprMode &= (~(FEC_OC_IPR_MODE_SERIAL__M));
-	if (state->m_enableParallel == false) {
-		/* MPEG data output is serial -> set ipr_mode[0] */
-		fecOcRegIprMode |= FEC_OC_IPR_MODE_SERIAL__M;
-	}
-
-	switch (oMode) {
-	case OM_DVBT:
-		maxBitRate = state->m_DVBTBitrate;
-		fecOcTmdMode = 3;
-		fecOcRcnCtlRate = 0xC00000;
-		staticCLK = state->m_DVBTStaticCLK;
-		break;
-	case OM_QAM_ITU_A:	/* fallthrough */
-	case OM_QAM_ITU_C:
-		fecOcTmdMode = 0x0004;
-		fecOcRcnCtlRate = 0xD2B4EE;	/* good for >63 Mb/s */
-		maxBitRate = state->m_DVBCBitrate;
-		staticCLK = state->m_DVBCStaticCLK;
-		break;
-	default:
-		status = -EINVAL;
-	}		/* switch (standard) */
-	if (status < 0)
-		goto error;
-
-	/* Configure DTO's */
-	if (staticCLK) {
-		u32 bitRate = 0;
-
-		/* Rational DTO for MCLK source (static MCLK rate),
-			Dynamic DTO for optimal grouping
-			(avoid intra-packet gaps),
-			DTO offset enable to sync TS burst with MSTRT */
-		fecOcDtoMode = (FEC_OC_DTO_MODE_DYNAMIC__M |
-				FEC_OC_DTO_MODE_OFFSET_ENABLE__M);
-		fecOcFctMode = (FEC_OC_FCT_MODE_RAT_ENA__M |
-				FEC_OC_FCT_MODE_VIRT_ENA__M);
-
-		/* Check user defined bitrate */
-		bitRate = maxBitRate;
-		if (bitRate > 75900000UL) {	/* max is 75.9 Mb/s */
-			bitRate = 75900000UL;
-		}
-		/* Rational DTO period:
-			dto_period = (Fsys / bitrate) - 2
-
-			Result should be floored,
-			to make sure >= requested bitrate
-			*/
-		fecOcDtoPeriod = (u16) (((state->m_sysClockFreq)
-						* 1000) / bitRate);
-		if (fecOcDtoPeriod <= 2)
-			fecOcDtoPeriod = 0;
-		else
-			fecOcDtoPeriod -= 2;
-		fecOcTmdIntUpdRate = 8;
-	} else {
-		/* (commonAttr->staticCLK == false) => dynamic mode */
-		fecOcDtoMode = FEC_OC_DTO_MODE_DYNAMIC__M;
-		fecOcFctMode = FEC_OC_FCT_MODE__PRE;
-		fecOcTmdIntUpdRate = 5;
-	}
-
-	/* Write appropriate registers with requested configuration */
-	status = write16(state, FEC_OC_DTO_BURST_LEN__A, fecOcDtoBurstLen);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_OC_DTO_PERIOD__A, fecOcDtoPeriod);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_OC_DTO_MODE__A, fecOcDtoMode);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_OC_FCT_MODE__A, fecOcFctMode);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_OC_MODE__A, fecOcRegMode);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_OC_IPR_MODE__A, fecOcRegIprMode);
-	if (status < 0)
-		goto error;
-
-	/* Rate integration settings */
-	status = write32(state, FEC_OC_RCN_CTL_RATE_LO__A, fecOcRcnCtlRate);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_OC_TMD_INT_UPD_RATE__A, fecOcTmdIntUpdRate);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_OC_TMD_MODE__A, fecOcTmdMode);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int MPEGTSConfigurePolarity(struct drxk_state *state)
-{
-	u16 fecOcRegIprInvert = 0;
-
-	/* Data mask for the output data byte */
-	u16 InvertDataMask =
-	    FEC_OC_IPR_INVERT_MD7__M | FEC_OC_IPR_INVERT_MD6__M |
-	    FEC_OC_IPR_INVERT_MD5__M | FEC_OC_IPR_INVERT_MD4__M |
-	    FEC_OC_IPR_INVERT_MD3__M | FEC_OC_IPR_INVERT_MD2__M |
-	    FEC_OC_IPR_INVERT_MD1__M | FEC_OC_IPR_INVERT_MD0__M;
-
-	dprintk(1, "\n");
-
-	/* Control selective inversion of output bits */
-	fecOcRegIprInvert &= (~(InvertDataMask));
-	if (state->m_invertDATA == true)
-		fecOcRegIprInvert |= InvertDataMask;
-	fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MERR__M));
-	if (state->m_invertERR == true)
-		fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MERR__M;
-	fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MSTRT__M));
-	if (state->m_invertSTR == true)
-		fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MSTRT__M;
-	fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MVAL__M));
-	if (state->m_invertVAL == true)
-		fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MVAL__M;
-	fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MCLK__M));
-	if (state->m_invertCLK == true)
-		fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MCLK__M;
-
-	return write16(state, FEC_OC_IPR_INVERT__A, fecOcRegIprInvert);
-}
-
-#define   SCU_RAM_AGC_KI_INV_RF_POL__M 0x4000
-
-static int SetAgcRf(struct drxk_state *state,
-		    struct SCfgAgc *pAgcCfg, bool isDTV)
-{
-	int status = -EINVAL;
-	u16 data = 0;
-	struct SCfgAgc *pIfAgcSettings;
-
-	dprintk(1, "\n");
-
-	if (pAgcCfg == NULL)
-		goto error;
-
-	switch (pAgcCfg->ctrlMode) {
-	case DRXK_AGC_CTRL_AUTO:
-		/* Enable RF AGC DAC */
-		status = read16(state, IQM_AF_STDBY__A, &data);
-		if (status < 0)
-			goto error;
-		data &= ~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY;
-		status = write16(state, IQM_AF_STDBY__A, data);
-		if (status < 0)
-			goto error;
-		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
-		if (status < 0)
-			goto error;
-
-		/* Enable SCU RF AGC loop */
-		data &= ~SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M;
-
-		/* Polarity */
-		if (state->m_RfAgcPol)
-			data |= SCU_RAM_AGC_CONFIG_INV_RF_POL__M;
-		else
-			data &= ~SCU_RAM_AGC_CONFIG_INV_RF_POL__M;
-		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
-		if (status < 0)
-			goto error;
-
-		/* Set speed (using complementary reduction value) */
-		status = read16(state, SCU_RAM_AGC_KI_RED__A, &data);
-		if (status < 0)
-			goto error;
-
-		data &= ~SCU_RAM_AGC_KI_RED_RAGC_RED__M;
-		data |= (~(pAgcCfg->speed <<
-				SCU_RAM_AGC_KI_RED_RAGC_RED__B)
-				& SCU_RAM_AGC_KI_RED_RAGC_RED__M);
-
-		status = write16(state, SCU_RAM_AGC_KI_RED__A, data);
-		if (status < 0)
-			goto error;
-
-		if (IsDVBT(state))
-			pIfAgcSettings = &state->m_dvbtIfAgcCfg;
-		else if (IsQAM(state))
-			pIfAgcSettings = &state->m_qamIfAgcCfg;
-		else
-			pIfAgcSettings = &state->m_atvIfAgcCfg;
-		if (pIfAgcSettings == NULL) {
-			status = -EINVAL;
-			goto error;
-		}
-
-		/* Set TOP, only if IF-AGC is in AUTO mode */
-		if (pIfAgcSettings->ctrlMode == DRXK_AGC_CTRL_AUTO)
-			status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, pAgcCfg->top);
-			if (status < 0)
-				goto error;
-
-		/* Cut-Off current */
-		status = write16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, pAgcCfg->cutOffCurrent);
-		if (status < 0)
-			goto error;
-
-		/* Max. output level */
-		status = write16(state, SCU_RAM_AGC_RF_MAX__A, pAgcCfg->maxOutputLevel);
-		if (status < 0)
-			goto error;
-
-		break;
-
-	case DRXK_AGC_CTRL_USER:
-		/* Enable RF AGC DAC */
-		status = read16(state, IQM_AF_STDBY__A, &data);
-		if (status < 0)
-			goto error;
-		data &= ~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY;
-		status = write16(state, IQM_AF_STDBY__A, data);
-		if (status < 0)
-			goto error;
-
-		/* Disable SCU RF AGC loop */
-		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
-		if (status < 0)
-			goto error;
-		data |= SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M;
-		if (state->m_RfAgcPol)
-			data |= SCU_RAM_AGC_CONFIG_INV_RF_POL__M;
-		else
-			data &= ~SCU_RAM_AGC_CONFIG_INV_RF_POL__M;
-		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
-		if (status < 0)
-			goto error;
-
-		/* SCU c.o.c. to 0, enabling full control range */
-		status = write16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, 0);
-		if (status < 0)
-			goto error;
-
-		/* Write value to output pin */
-		status = write16(state, SCU_RAM_AGC_RF_IACCU_HI__A, pAgcCfg->outputLevel);
-		if (status < 0)
-			goto error;
-		break;
-
-	case DRXK_AGC_CTRL_OFF:
-		/* Disable RF AGC DAC */
-		status = read16(state, IQM_AF_STDBY__A, &data);
-		if (status < 0)
-			goto error;
-		data |= IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY;
-		status = write16(state, IQM_AF_STDBY__A, data);
-		if (status < 0)
-			goto error;
-
-		/* Disable SCU RF AGC loop */
-		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
-		if (status < 0)
-			goto error;
-		data |= SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M;
-		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
-		if (status < 0)
-			goto error;
-		break;
-
-	default:
-		status = -EINVAL;
-
-	}
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-#define SCU_RAM_AGC_KI_INV_IF_POL__M 0x2000
-
-static int SetAgcIf(struct drxk_state *state,
-		    struct SCfgAgc *pAgcCfg, bool isDTV)
-{
-	u16 data = 0;
-	int status = 0;
-	struct SCfgAgc *pRfAgcSettings;
-
-	dprintk(1, "\n");
-
-	switch (pAgcCfg->ctrlMode) {
-	case DRXK_AGC_CTRL_AUTO:
-
-		/* Enable IF AGC DAC */
-		status = read16(state, IQM_AF_STDBY__A, &data);
-		if (status < 0)
-			goto error;
-		data &= ~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY;
-		status = write16(state, IQM_AF_STDBY__A, data);
-		if (status < 0)
-			goto error;
-
-		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
-		if (status < 0)
-			goto error;
-
-		/* Enable SCU IF AGC loop */
-		data &= ~SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M;
-
-		/* Polarity */
-		if (state->m_IfAgcPol)
-			data |= SCU_RAM_AGC_CONFIG_INV_IF_POL__M;
-		else
-			data &= ~SCU_RAM_AGC_CONFIG_INV_IF_POL__M;
-		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
-		if (status < 0)
-			goto error;
-
-		/* Set speed (using complementary reduction value) */
-		status = read16(state, SCU_RAM_AGC_KI_RED__A, &data);
-		if (status < 0)
-			goto error;
-		data &= ~SCU_RAM_AGC_KI_RED_IAGC_RED__M;
-		data |= (~(pAgcCfg->speed <<
-				SCU_RAM_AGC_KI_RED_IAGC_RED__B)
-				& SCU_RAM_AGC_KI_RED_IAGC_RED__M);
-
-		status = write16(state, SCU_RAM_AGC_KI_RED__A, data);
-		if (status < 0)
-			goto error;
-
-		if (IsQAM(state))
-			pRfAgcSettings = &state->m_qamRfAgcCfg;
-		else
-			pRfAgcSettings = &state->m_atvRfAgcCfg;
-		if (pRfAgcSettings == NULL)
-			return -1;
-		/* Restore TOP */
-		status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, pRfAgcSettings->top);
-		if (status < 0)
-			goto error;
-		break;
-
-	case DRXK_AGC_CTRL_USER:
-
-		/* Enable IF AGC DAC */
-		status = read16(state, IQM_AF_STDBY__A, &data);
-		if (status < 0)
-			goto error;
-		data &= ~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY;
-		status = write16(state, IQM_AF_STDBY__A, data);
-		if (status < 0)
-			goto error;
-
-		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
-		if (status < 0)
-			goto error;
-
-		/* Disable SCU IF AGC loop */
-		data |= SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M;
-
-		/* Polarity */
-		if (state->m_IfAgcPol)
-			data |= SCU_RAM_AGC_CONFIG_INV_IF_POL__M;
-		else
-			data &= ~SCU_RAM_AGC_CONFIG_INV_IF_POL__M;
-		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
-		if (status < 0)
-			goto error;
-
-		/* Write value to output pin */
-		status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, pAgcCfg->outputLevel);
-		if (status < 0)
-			goto error;
-		break;
-
-	case DRXK_AGC_CTRL_OFF:
-
-		/* Disable If AGC DAC */
-		status = read16(state, IQM_AF_STDBY__A, &data);
-		if (status < 0)
-			goto error;
-		data |= IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY;
-		status = write16(state, IQM_AF_STDBY__A, data);
-		if (status < 0)
-			goto error;
-
-		/* Disable SCU IF AGC loop */
-		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
-		if (status < 0)
-			goto error;
-		data |= SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M;
-		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
-		if (status < 0)
-			goto error;
-		break;
-	}		/* switch (agcSettingsIf->ctrlMode) */
-
-	/* always set the top to support
-		configurations without if-loop */
-	status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, pAgcCfg->top);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int ReadIFAgc(struct drxk_state *state, u32 *pValue)
-{
-	u16 agcDacLvl;
-	int status;
-	u16 Level = 0;
-
-	dprintk(1, "\n");
-
-	status = read16(state, IQM_AF_AGC_IF__A, &agcDacLvl);
-	if (status < 0) {
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-		return status;
-	}
-
-	*pValue = 0;
-
-	if (agcDacLvl > DRXK_AGC_DAC_OFFSET)
-		Level = agcDacLvl - DRXK_AGC_DAC_OFFSET;
-	if (Level < 14000)
-		*pValue = (14000 - Level) / 4;
-	else
-		*pValue = 0;
-
-	return status;
-}
-
-static int GetQAMSignalToNoise(struct drxk_state *state,
-			       s32 *pSignalToNoise)
-{
-	int status = 0;
-	u16 qamSlErrPower = 0;	/* accum. error between
-					raw and sliced symbols */
-	u32 qamSlSigPower = 0;	/* used for MER, depends of
-					QAM modulation */
-	u32 qamSlMer = 0;	/* QAM MER */
-
-	dprintk(1, "\n");
-
-	/* MER calculation */
-
-	/* get the register value needed for MER */
-	status = read16(state, QAM_SL_ERR_POWER__A, &qamSlErrPower);
-	if (status < 0) {
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-		return -EINVAL;
-	}
-
-	switch (state->props.modulation) {
-	case QAM_16:
-		qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM16 << 2;
-		break;
-	case QAM_32:
-		qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM32 << 2;
-		break;
-	case QAM_64:
-		qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM64 << 2;
-		break;
-	case QAM_128:
-		qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM128 << 2;
-		break;
-	default:
-	case QAM_256:
-		qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM256 << 2;
-		break;
-	}
-
-	if (qamSlErrPower > 0) {
-		qamSlMer = Log10Times100(qamSlSigPower) -
-			Log10Times100((u32) qamSlErrPower);
-	}
-	*pSignalToNoise = qamSlMer;
-
-	return status;
-}
-
-static int GetDVBTSignalToNoise(struct drxk_state *state,
-				s32 *pSignalToNoise)
-{
-	int status;
-	u16 regData = 0;
-	u32 EqRegTdSqrErrI = 0;
-	u32 EqRegTdSqrErrQ = 0;
-	u16 EqRegTdSqrErrExp = 0;
-	u16 EqRegTdTpsPwrOfs = 0;
-	u16 EqRegTdReqSmbCnt = 0;
-	u32 tpsCnt = 0;
-	u32 SqrErrIQ = 0;
-	u32 a = 0;
-	u32 b = 0;
-	u32 c = 0;
-	u32 iMER = 0;
-	u16 transmissionParams = 0;
-
-	dprintk(1, "\n");
-
-	status = read16(state, OFDM_EQ_TOP_TD_TPS_PWR_OFS__A, &EqRegTdTpsPwrOfs);
-	if (status < 0)
-		goto error;
-	status = read16(state, OFDM_EQ_TOP_TD_REQ_SMB_CNT__A, &EqRegTdReqSmbCnt);
-	if (status < 0)
-		goto error;
-	status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_EXP__A, &EqRegTdSqrErrExp);
-	if (status < 0)
-		goto error;
-	status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_I__A, &regData);
-	if (status < 0)
-		goto error;
-	/* Extend SQR_ERR_I operational range */
-	EqRegTdSqrErrI = (u32) regData;
-	if ((EqRegTdSqrErrExp > 11) &&
-		(EqRegTdSqrErrI < 0x00000FFFUL)) {
-		EqRegTdSqrErrI += 0x00010000UL;
-	}
-	status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_Q__A, &regData);
-	if (status < 0)
-		goto error;
-	/* Extend SQR_ERR_Q operational range */
-	EqRegTdSqrErrQ = (u32) regData;
-	if ((EqRegTdSqrErrExp > 11) &&
-		(EqRegTdSqrErrQ < 0x00000FFFUL))
-		EqRegTdSqrErrQ += 0x00010000UL;
-
-	status = read16(state, OFDM_SC_RA_RAM_OP_PARAM__A, &transmissionParams);
-	if (status < 0)
-		goto error;
-
-	/* Check input data for MER */
-
-	/* MER calculation (in 0.1 dB) without math.h */
-	if ((EqRegTdTpsPwrOfs == 0) || (EqRegTdReqSmbCnt == 0))
-		iMER = 0;
-	else if ((EqRegTdSqrErrI + EqRegTdSqrErrQ) == 0) {
-		/* No error at all, this must be the HW reset value
-			* Apparently no first measurement yet
-			* Set MER to 0.0 */
-		iMER = 0;
-	} else {
-		SqrErrIQ = (EqRegTdSqrErrI + EqRegTdSqrErrQ) <<
-			EqRegTdSqrErrExp;
-		if ((transmissionParams &
-			OFDM_SC_RA_RAM_OP_PARAM_MODE__M)
-			== OFDM_SC_RA_RAM_OP_PARAM_MODE_2K)
-			tpsCnt = 17;
-		else
-			tpsCnt = 68;
-
-		/* IMER = 100 * log10 (x)
-			where x = (EqRegTdTpsPwrOfs^2 *
-			EqRegTdReqSmbCnt * tpsCnt)/SqrErrIQ
-
-			=> IMER = a + b -c
-			where a = 100 * log10 (EqRegTdTpsPwrOfs^2)
-			b = 100 * log10 (EqRegTdReqSmbCnt * tpsCnt)
-			c = 100 * log10 (SqrErrIQ)
-			*/
-
-		/* log(x) x = 9bits * 9bits->18 bits  */
-		a = Log10Times100(EqRegTdTpsPwrOfs *
-					EqRegTdTpsPwrOfs);
-		/* log(x) x = 16bits * 7bits->23 bits  */
-		b = Log10Times100(EqRegTdReqSmbCnt * tpsCnt);
-		/* log(x) x = (16bits + 16bits) << 15 ->32 bits  */
-		c = Log10Times100(SqrErrIQ);
-
-		iMER = a + b;
-		/* No negative MER, clip to zero */
-		if (iMER > c)
-			iMER -= c;
-		else
-			iMER = 0;
-	}
-	*pSignalToNoise = iMER;
-
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int GetSignalToNoise(struct drxk_state *state, s32 *pSignalToNoise)
-{
-	dprintk(1, "\n");
-
-	*pSignalToNoise = 0;
-	switch (state->m_OperationMode) {
-	case OM_DVBT:
-		return GetDVBTSignalToNoise(state, pSignalToNoise);
-	case OM_QAM_ITU_A:
-	case OM_QAM_ITU_C:
-		return GetQAMSignalToNoise(state, pSignalToNoise);
-	default:
-		break;
-	}
-	return 0;
-}
-
-#if 0
-static int GetDVBTQuality(struct drxk_state *state, s32 *pQuality)
-{
-	/* SNR Values for quasi errorfree reception rom Nordig 2.2 */
-	int status = 0;
-
-	dprintk(1, "\n");
-
-	static s32 QE_SN[] = {
-		51,		/* QPSK 1/2 */
-		69,		/* QPSK 2/3 */
-		79,		/* QPSK 3/4 */
-		89,		/* QPSK 5/6 */
-		97,		/* QPSK 7/8 */
-		108,		/* 16-QAM 1/2 */
-		131,		/* 16-QAM 2/3 */
-		146,		/* 16-QAM 3/4 */
-		156,		/* 16-QAM 5/6 */
-		160,		/* 16-QAM 7/8 */
-		165,		/* 64-QAM 1/2 */
-		187,		/* 64-QAM 2/3 */
-		202,		/* 64-QAM 3/4 */
-		216,		/* 64-QAM 5/6 */
-		225,		/* 64-QAM 7/8 */
-	};
-
-	*pQuality = 0;
-
-	do {
-		s32 SignalToNoise = 0;
-		u16 Constellation = 0;
-		u16 CodeRate = 0;
-		u32 SignalToNoiseRel;
-		u32 BERQuality;
-
-		status = GetDVBTSignalToNoise(state, &SignalToNoise);
-		if (status < 0)
-			break;
-		status = read16(state, OFDM_EQ_TOP_TD_TPS_CONST__A, &Constellation);
-		if (status < 0)
-			break;
-		Constellation &= OFDM_EQ_TOP_TD_TPS_CONST__M;
-
-		status = read16(state, OFDM_EQ_TOP_TD_TPS_CODE_HP__A, &CodeRate);
-		if (status < 0)
-			break;
-		CodeRate &= OFDM_EQ_TOP_TD_TPS_CODE_HP__M;
-
-		if (Constellation > OFDM_EQ_TOP_TD_TPS_CONST_64QAM ||
-		    CodeRate > OFDM_EQ_TOP_TD_TPS_CODE_LP_7_8)
-			break;
-		SignalToNoiseRel = SignalToNoise -
-		    QE_SN[Constellation * 5 + CodeRate];
-		BERQuality = 100;
-
-		if (SignalToNoiseRel < -70)
-			*pQuality = 0;
-		else if (SignalToNoiseRel < 30)
-			*pQuality = ((SignalToNoiseRel + 70) *
-				     BERQuality) / 100;
-		else
-			*pQuality = BERQuality;
-	} while (0);
-	return 0;
-};
-
-static int GetDVBCQuality(struct drxk_state *state, s32 *pQuality)
-{
-	int status = 0;
-	*pQuality = 0;
-
-	dprintk(1, "\n");
-
-	do {
-		u32 SignalToNoise = 0;
-		u32 BERQuality = 100;
-		u32 SignalToNoiseRel = 0;
-
-		status = GetQAMSignalToNoise(state, &SignalToNoise);
-		if (status < 0)
-			break;
-
-		switch (state->props.modulation) {
-		case QAM_16:
-			SignalToNoiseRel = SignalToNoise - 200;
-			break;
-		case QAM_32:
-			SignalToNoiseRel = SignalToNoise - 230;
-			break;	/* Not in NorDig */
-		case QAM_64:
-			SignalToNoiseRel = SignalToNoise - 260;
-			break;
-		case QAM_128:
-			SignalToNoiseRel = SignalToNoise - 290;
-			break;
-		default:
-		case QAM_256:
-			SignalToNoiseRel = SignalToNoise - 320;
-			break;
-		}
-
-		if (SignalToNoiseRel < -70)
-			*pQuality = 0;
-		else if (SignalToNoiseRel < 30)
-			*pQuality = ((SignalToNoiseRel + 70) *
-				     BERQuality) / 100;
-		else
-			*pQuality = BERQuality;
-	} while (0);
-
-	return status;
-}
-
-static int GetQuality(struct drxk_state *state, s32 *pQuality)
-{
-	dprintk(1, "\n");
-
-	switch (state->m_OperationMode) {
-	case OM_DVBT:
-		return GetDVBTQuality(state, pQuality);
-	case OM_QAM_ITU_A:
-		return GetDVBCQuality(state, pQuality);
-	default:
-		break;
-	}
-
-	return 0;
-}
-#endif
-
-/* Free data ram in SIO HI */
-#define SIO_HI_RA_RAM_USR_BEGIN__A 0x420040
-#define SIO_HI_RA_RAM_USR_END__A   0x420060
-
-#define DRXK_HI_ATOMIC_BUF_START (SIO_HI_RA_RAM_USR_BEGIN__A)
-#define DRXK_HI_ATOMIC_BUF_END   (SIO_HI_RA_RAM_USR_BEGIN__A + 7)
-#define DRXK_HI_ATOMIC_READ      SIO_HI_RA_RAM_PAR_3_ACP_RW_READ
-#define DRXK_HI_ATOMIC_WRITE     SIO_HI_RA_RAM_PAR_3_ACP_RW_WRITE
-
-#define DRXDAP_FASI_ADDR2BLOCK(addr)  (((addr) >> 22) & 0x3F)
-#define DRXDAP_FASI_ADDR2BANK(addr)   (((addr) >> 16) & 0x3F)
-#define DRXDAP_FASI_ADDR2OFFSET(addr) ((addr) & 0x7FFF)
-
-static int ConfigureI2CBridge(struct drxk_state *state, bool bEnableBridge)
-{
-	int status = -EINVAL;
-
-	dprintk(1, "\n");
-
-	if (state->m_DrxkState == DRXK_UNINITIALIZED)
-		return 0;
-	if (state->m_DrxkState == DRXK_POWERED_DOWN)
-		goto error;
-
-	if (state->no_i2c_bridge)
-		return 0;
-
-	status = write16(state, SIO_HI_RA_RAM_PAR_1__A, SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY);
-	if (status < 0)
-		goto error;
-	if (bEnableBridge) {
-		status = write16(state, SIO_HI_RA_RAM_PAR_2__A, SIO_HI_RA_RAM_PAR_2_BRD_CFG_CLOSED);
-		if (status < 0)
-			goto error;
-	} else {
-		status = write16(state, SIO_HI_RA_RAM_PAR_2__A, SIO_HI_RA_RAM_PAR_2_BRD_CFG_OPEN);
-		if (status < 0)
-			goto error;
-	}
-
-	status = HI_Command(state, SIO_HI_RA_RAM_CMD_BRDCTRL, 0);
-
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int SetPreSaw(struct drxk_state *state,
-		     struct SCfgPreSaw *pPreSawCfg)
-{
-	int status = -EINVAL;
-
-	dprintk(1, "\n");
-
-	if ((pPreSawCfg == NULL)
-	    || (pPreSawCfg->reference > IQM_AF_PDREF__M))
-		goto error;
-
-	status = write16(state, IQM_AF_PDREF__A, pPreSawCfg->reference);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int BLDirectCmd(struct drxk_state *state, u32 targetAddr,
-		       u16 romOffset, u16 nrOfElements, u32 timeOut)
-{
-	u16 blStatus = 0;
-	u16 offset = (u16) ((targetAddr >> 0) & 0x00FFFF);
-	u16 blockbank = (u16) ((targetAddr >> 16) & 0x000FFF);
-	int status;
-	unsigned long end;
-
-	dprintk(1, "\n");
-
-	mutex_lock(&state->mutex);
-	status = write16(state, SIO_BL_MODE__A, SIO_BL_MODE_DIRECT);
-	if (status < 0)
-		goto error;
-	status = write16(state, SIO_BL_TGT_HDR__A, blockbank);
-	if (status < 0)
-		goto error;
-	status = write16(state, SIO_BL_TGT_ADDR__A, offset);
-	if (status < 0)
-		goto error;
-	status = write16(state, SIO_BL_SRC_ADDR__A, romOffset);
-	if (status < 0)
-		goto error;
-	status = write16(state, SIO_BL_SRC_LEN__A, nrOfElements);
-	if (status < 0)
-		goto error;
-	status = write16(state, SIO_BL_ENABLE__A, SIO_BL_ENABLE_ON);
-	if (status < 0)
-		goto error;
-
-	end = jiffies + msecs_to_jiffies(timeOut);
-	do {
-		status = read16(state, SIO_BL_STATUS__A, &blStatus);
-		if (status < 0)
-			goto error;
-	} while ((blStatus == 0x1) && time_is_after_jiffies(end));
-	if (blStatus == 0x1) {
-		printk(KERN_ERR "drxk: SIO not ready\n");
-		status = -EINVAL;
-		goto error2;
-	}
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-error2:
-	mutex_unlock(&state->mutex);
-	return status;
-
-}
-
-static int ADCSyncMeasurement(struct drxk_state *state, u16 *count)
-{
-	u16 data = 0;
-	int status;
-
-	dprintk(1, "\n");
-
-	/* Start measurement */
-	status = write16(state, IQM_AF_COMM_EXEC__A, IQM_AF_COMM_EXEC_ACTIVE);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_AF_START_LOCK__A, 1);
-	if (status < 0)
-		goto error;
-
-	*count = 0;
-	status = read16(state, IQM_AF_PHASE0__A, &data);
-	if (status < 0)
-		goto error;
-	if (data == 127)
-		*count = *count + 1;
-	status = read16(state, IQM_AF_PHASE1__A, &data);
-	if (status < 0)
-		goto error;
-	if (data == 127)
-		*count = *count + 1;
-	status = read16(state, IQM_AF_PHASE2__A, &data);
-	if (status < 0)
-		goto error;
-	if (data == 127)
-		*count = *count + 1;
-
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int ADCSynchronization(struct drxk_state *state)
-{
-	u16 count = 0;
-	int status;
-
-	dprintk(1, "\n");
-
-	status = ADCSyncMeasurement(state, &count);
-	if (status < 0)
-		goto error;
-
-	if (count == 1) {
-		/* Try sampling on a diffrent edge */
-		u16 clkNeg = 0;
-
-		status = read16(state, IQM_AF_CLKNEG__A, &clkNeg);
-		if (status < 0)
-			goto error;
-		if ((clkNeg & IQM_AF_CLKNEG_CLKNEGDATA__M) ==
-			IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS) {
-			clkNeg &= (~(IQM_AF_CLKNEG_CLKNEGDATA__M));
-			clkNeg |=
-				IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_NEG;
-		} else {
-			clkNeg &= (~(IQM_AF_CLKNEG_CLKNEGDATA__M));
-			clkNeg |=
-				IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS;
-		}
-		status = write16(state, IQM_AF_CLKNEG__A, clkNeg);
-		if (status < 0)
-			goto error;
-		status = ADCSyncMeasurement(state, &count);
-		if (status < 0)
-			goto error;
-	}
-
-	if (count < 2)
-		status = -EINVAL;
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int SetFrequencyShifter(struct drxk_state *state,
-			       u16 intermediateFreqkHz,
-			       s32 tunerFreqOffset, bool isDTV)
-{
-	bool selectPosImage = false;
-	u32 rfFreqResidual = tunerFreqOffset;
-	u32 fmFrequencyShift = 0;
-	bool tunerMirror = !state->m_bMirrorFreqSpect;
-	u32 adcFreq;
-	bool adcFlip;
-	int status;
-	u32 ifFreqActual;
-	u32 samplingFrequency = (u32) (state->m_sysClockFreq / 3);
-	u32 frequencyShift;
-	bool imageToSelect;
-
-	dprintk(1, "\n");
-
-	/*
-	   Program frequency shifter
-	   No need to account for mirroring on RF
-	 */
-	if (isDTV) {
-		if ((state->m_OperationMode == OM_QAM_ITU_A) ||
-		    (state->m_OperationMode == OM_QAM_ITU_C) ||
-		    (state->m_OperationMode == OM_DVBT))
-			selectPosImage = true;
-		else
-			selectPosImage = false;
-	}
-	if (tunerMirror)
-		/* tuner doesn't mirror */
-		ifFreqActual = intermediateFreqkHz +
-		    rfFreqResidual + fmFrequencyShift;
-	else
-		/* tuner mirrors */
-		ifFreqActual = intermediateFreqkHz -
-		    rfFreqResidual - fmFrequencyShift;
-	if (ifFreqActual > samplingFrequency / 2) {
-		/* adc mirrors */
-		adcFreq = samplingFrequency - ifFreqActual;
-		adcFlip = true;
-	} else {
-		/* adc doesn't mirror */
-		adcFreq = ifFreqActual;
-		adcFlip = false;
-	}
-
-	frequencyShift = adcFreq;
-	imageToSelect = state->m_rfmirror ^ tunerMirror ^
-	    adcFlip ^ selectPosImage;
-	state->m_IqmFsRateOfs =
-	    Frac28a((frequencyShift), samplingFrequency);
-
-	if (imageToSelect)
-		state->m_IqmFsRateOfs = ~state->m_IqmFsRateOfs + 1;
-
-	/* Program frequency shifter with tuner offset compensation */
-	/* frequencyShift += tunerFreqOffset; TODO */
-	status = write32(state, IQM_FS_RATE_OFS_LO__A,
-			 state->m_IqmFsRateOfs);
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int InitAGC(struct drxk_state *state, bool isDTV)
-{
-	u16 ingainTgt = 0;
-	u16 ingainTgtMin = 0;
-	u16 ingainTgtMax = 0;
-	u16 clpCyclen = 0;
-	u16 clpSumMin = 0;
-	u16 clpDirTo = 0;
-	u16 snsSumMin = 0;
-	u16 snsSumMax = 0;
-	u16 clpSumMax = 0;
-	u16 snsDirTo = 0;
-	u16 kiInnergainMin = 0;
-	u16 ifIaccuHiTgt = 0;
-	u16 ifIaccuHiTgtMin = 0;
-	u16 ifIaccuHiTgtMax = 0;
-	u16 data = 0;
-	u16 fastClpCtrlDelay = 0;
-	u16 clpCtrlMode = 0;
-	int status = 0;
-
-	dprintk(1, "\n");
-
-	/* Common settings */
-	snsSumMax = 1023;
-	ifIaccuHiTgtMin = 2047;
-	clpCyclen = 500;
-	clpSumMax = 1023;
-
-	/* AGCInit() not available for DVBT; init done in microcode */
-	if (!IsQAM(state)) {
-		printk(KERN_ERR "drxk: %s: mode %d is not DVB-C\n", __func__, state->m_OperationMode);
-		return -EINVAL;
-	}
-
-	/* FIXME: Analog TV AGC require different settings */
-
-	/* Standard specific settings */
-	clpSumMin = 8;
-	clpDirTo = (u16) -9;
-	clpCtrlMode = 0;
-	snsSumMin = 8;
-	snsDirTo = (u16) -9;
-	kiInnergainMin = (u16) -1030;
-	ifIaccuHiTgtMax = 0x2380;
-	ifIaccuHiTgt = 0x2380;
-	ingainTgtMin = 0x0511;
-	ingainTgt = 0x0511;
-	ingainTgtMax = 5119;
-	fastClpCtrlDelay = state->m_qamIfAgcCfg.FastClipCtrlDelay;
-
-	status = write16(state, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A, fastClpCtrlDelay);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, SCU_RAM_AGC_CLP_CTRL_MODE__A, clpCtrlMode);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_INGAIN_TGT__A, ingainTgt);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, ingainTgtMin);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MAX__A, ingainTgtMax);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MIN__A, ifIaccuHiTgtMin);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, ifIaccuHiTgtMax);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_IF_IACCU_HI__A, 0);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_IF_IACCU_LO__A, 0);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_RF_IACCU_HI__A, 0);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_RF_IACCU_LO__A, 0);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_CLP_SUM_MAX__A, clpSumMax);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_SNS_SUM_MAX__A, snsSumMax);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, SCU_RAM_AGC_KI_INNERGAIN_MIN__A, kiInnergainMin);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT__A, ifIaccuHiTgt);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_CLP_CYCLEN__A, clpCyclen);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, SCU_RAM_AGC_RF_SNS_DEV_MAX__A, 1023);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_RF_SNS_DEV_MIN__A, (u16) -1023);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_FAST_SNS_CTRL_DELAY__A, 50);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, SCU_RAM_AGC_KI_MAXMINGAIN_TH__A, 20);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_CLP_SUM_MIN__A, clpSumMin);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_SNS_SUM_MIN__A, snsSumMin);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_CLP_DIR_TO__A, clpDirTo);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_SNS_DIR_TO__A, snsDirTo);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_KI_MINGAIN__A, 0x7fff);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_KI_MAXGAIN__A, 0x0);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_KI_MIN__A, 0x0117);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_KI_MAX__A, 0x0657);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_CLP_SUM__A, 0);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_CLP_CYCCNT__A, 0);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_CLP_DIR_WD__A, 0);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_CLP_DIR_STP__A, 1);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_SNS_SUM__A, 0);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_SNS_CYCCNT__A, 0);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_SNS_DIR_WD__A, 0);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_SNS_DIR_STP__A, 1);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_SNS_CYCLEN__A, 500);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_KI_CYCLEN__A, 500);
-	if (status < 0)
-		goto error;
-
-	/* Initialize inner-loop KI gain factors */
-	status = read16(state, SCU_RAM_AGC_KI__A, &data);
-	if (status < 0)
-		goto error;
-
-	data = 0x0657;
-	data &= ~SCU_RAM_AGC_KI_RF__M;
-	data |= (DRXK_KI_RAGC_QAM << SCU_RAM_AGC_KI_RF__B);
-	data &= ~SCU_RAM_AGC_KI_IF__M;
-	data |= (DRXK_KI_IAGC_QAM << SCU_RAM_AGC_KI_IF__B);
-
-	status = write16(state, SCU_RAM_AGC_KI__A, data);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int DVBTQAMGetAccPktErr(struct drxk_state *state, u16 *packetErr)
-{
-	int status;
-
-	dprintk(1, "\n");
-	if (packetErr == NULL)
-		status = write16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, 0);
-	else
-		status = read16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, packetErr);
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int DVBTScCommand(struct drxk_state *state,
-			 u16 cmd, u16 subcmd,
-			 u16 param0, u16 param1, u16 param2,
-			 u16 param3, u16 param4)
-{
-	u16 curCmd = 0;
-	u16 errCode = 0;
-	u16 retryCnt = 0;
-	u16 scExec = 0;
-	int status;
-
-	dprintk(1, "\n");
-	status = read16(state, OFDM_SC_COMM_EXEC__A, &scExec);
-	if (scExec != 1) {
-		/* SC is not running */
-		status = -EINVAL;
-	}
-	if (status < 0)
-		goto error;
-
-	/* Wait until sc is ready to receive command */
-	retryCnt = 0;
-	do {
-		msleep(1);
-		status = read16(state, OFDM_SC_RA_RAM_CMD__A, &curCmd);
-		retryCnt++;
-	} while ((curCmd != 0) && (retryCnt < DRXK_MAX_RETRIES));
-	if (retryCnt >= DRXK_MAX_RETRIES && (status < 0))
-		goto error;
-
-	/* Write sub-command */
-	switch (cmd) {
-		/* All commands using sub-cmd */
-	case OFDM_SC_RA_RAM_CMD_PROC_START:
-	case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM:
-	case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM:
-		status = write16(state, OFDM_SC_RA_RAM_CMD_ADDR__A, subcmd);
-		if (status < 0)
-			goto error;
-		break;
-	default:
-		/* Do nothing */
-		break;
-	}
-
-	/* Write needed parameters and the command */
-	switch (cmd) {
-		/* All commands using 5 parameters */
-		/* All commands using 4 parameters */
-		/* All commands using 3 parameters */
-		/* All commands using 2 parameters */
-	case OFDM_SC_RA_RAM_CMD_PROC_START:
-	case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM:
-	case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM:
-		status = write16(state, OFDM_SC_RA_RAM_PARAM1__A, param1);
-		/* All commands using 1 parameters */
-	case OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING:
-	case OFDM_SC_RA_RAM_CMD_USER_IO:
-		status = write16(state, OFDM_SC_RA_RAM_PARAM0__A, param0);
-		/* All commands using 0 parameters */
-	case OFDM_SC_RA_RAM_CMD_GET_OP_PARAM:
-	case OFDM_SC_RA_RAM_CMD_NULL:
-		/* Write command */
-		status = write16(state, OFDM_SC_RA_RAM_CMD__A, cmd);
-		break;
-	default:
-		/* Unknown command */
-		status = -EINVAL;
-	}
-	if (status < 0)
-		goto error;
-
-	/* Wait until sc is ready processing command */
-	retryCnt = 0;
-	do {
-		msleep(1);
-		status = read16(state, OFDM_SC_RA_RAM_CMD__A, &curCmd);
-		retryCnt++;
-	} while ((curCmd != 0) && (retryCnt < DRXK_MAX_RETRIES));
-	if (retryCnt >= DRXK_MAX_RETRIES && (status < 0))
-		goto error;
-
-	/* Check for illegal cmd */
-	status = read16(state, OFDM_SC_RA_RAM_CMD_ADDR__A, &errCode);
-	if (errCode == 0xFFFF) {
-		/* illegal command */
-		status = -EINVAL;
-	}
-	if (status < 0)
-		goto error;
-
-	/* Retreive results parameters from SC */
-	switch (cmd) {
-		/* All commands yielding 5 results */
-		/* All commands yielding 4 results */
-		/* All commands yielding 3 results */
-		/* All commands yielding 2 results */
-		/* All commands yielding 1 result */
-	case OFDM_SC_RA_RAM_CMD_USER_IO:
-	case OFDM_SC_RA_RAM_CMD_GET_OP_PARAM:
-		status = read16(state, OFDM_SC_RA_RAM_PARAM0__A, &(param0));
-		/* All commands yielding 0 results */
-	case OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING:
-	case OFDM_SC_RA_RAM_CMD_SET_TIMER:
-	case OFDM_SC_RA_RAM_CMD_PROC_START:
-	case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM:
-	case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM:
-	case OFDM_SC_RA_RAM_CMD_NULL:
-		break;
-	default:
-		/* Unknown command */
-		status = -EINVAL;
-		break;
-	}			/* switch (cmd->cmd) */
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int PowerUpDVBT(struct drxk_state *state)
-{
-	enum DRXPowerMode powerMode = DRX_POWER_UP;
-	int status;
-
-	dprintk(1, "\n");
-	status = CtrlPowerMode(state, &powerMode);
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int DVBTCtrlSetIncEnable(struct drxk_state *state, bool *enabled)
-{
-	int status;
-
-	dprintk(1, "\n");
-	if (*enabled == true)
-		status = write16(state, IQM_CF_BYPASSDET__A, 0);
-	else
-		status = write16(state, IQM_CF_BYPASSDET__A, 1);
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-#define DEFAULT_FR_THRES_8K     4000
-static int DVBTCtrlSetFrEnable(struct drxk_state *state, bool *enabled)
-{
-
-	int status;
-
-	dprintk(1, "\n");
-	if (*enabled == true) {
-		/* write mask to 1 */
-		status = write16(state, OFDM_SC_RA_RAM_FR_THRES_8K__A,
-				   DEFAULT_FR_THRES_8K);
-	} else {
-		/* write mask to 0 */
-		status = write16(state, OFDM_SC_RA_RAM_FR_THRES_8K__A, 0);
-	}
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-
-	return status;
-}
-
-static int DVBTCtrlSetEchoThreshold(struct drxk_state *state,
-				    struct DRXKCfgDvbtEchoThres_t *echoThres)
-{
-	u16 data = 0;
-	int status;
-
-	dprintk(1, "\n");
-	status = read16(state, OFDM_SC_RA_RAM_ECHO_THRES__A, &data);
-	if (status < 0)
-		goto error;
-
-	switch (echoThres->fftMode) {
-	case DRX_FFTMODE_2K:
-		data &= ~OFDM_SC_RA_RAM_ECHO_THRES_2K__M;
-		data |= ((echoThres->threshold <<
-			OFDM_SC_RA_RAM_ECHO_THRES_2K__B)
-			& (OFDM_SC_RA_RAM_ECHO_THRES_2K__M));
-		break;
-	case DRX_FFTMODE_8K:
-		data &= ~OFDM_SC_RA_RAM_ECHO_THRES_8K__M;
-		data |= ((echoThres->threshold <<
-			OFDM_SC_RA_RAM_ECHO_THRES_8K__B)
-			& (OFDM_SC_RA_RAM_ECHO_THRES_8K__M));
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	status = write16(state, OFDM_SC_RA_RAM_ECHO_THRES__A, data);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int DVBTCtrlSetSqiSpeed(struct drxk_state *state,
-			       enum DRXKCfgDvbtSqiSpeed *speed)
-{
-	int status = -EINVAL;
-
-	dprintk(1, "\n");
-
-	switch (*speed) {
-	case DRXK_DVBT_SQI_SPEED_FAST:
-	case DRXK_DVBT_SQI_SPEED_MEDIUM:
-	case DRXK_DVBT_SQI_SPEED_SLOW:
-		break;
-	default:
-		goto error;
-	}
-	status = write16(state, SCU_RAM_FEC_PRE_RS_BER_FILTER_SH__A,
-			   (u16) *speed);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-/*============================================================================*/
-
-/**
-* \brief Activate DVBT specific presets
-* \param demod instance of demodulator.
-* \return DRXStatus_t.
-*
-* Called in DVBTSetStandard
-*
-*/
-static int DVBTActivatePresets(struct drxk_state *state)
-{
-	int status;
-	bool setincenable = false;
-	bool setfrenable = true;
-
-	struct DRXKCfgDvbtEchoThres_t echoThres2k = { 0, DRX_FFTMODE_2K };
-	struct DRXKCfgDvbtEchoThres_t echoThres8k = { 0, DRX_FFTMODE_8K };
-
-	dprintk(1, "\n");
-	status = DVBTCtrlSetIncEnable(state, &setincenable);
-	if (status < 0)
-		goto error;
-	status = DVBTCtrlSetFrEnable(state, &setfrenable);
-	if (status < 0)
-		goto error;
-	status = DVBTCtrlSetEchoThreshold(state, &echoThres2k);
-	if (status < 0)
-		goto error;
-	status = DVBTCtrlSetEchoThreshold(state, &echoThres8k);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MAX__A, state->m_dvbtIfAgcCfg.IngainTgtMax);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-/*============================================================================*/
-
-/**
-* \brief Initialize channelswitch-independent settings for DVBT.
-* \param demod instance of demodulator.
-* \return DRXStatus_t.
-*
-* For ROM code channel filter taps are loaded from the bootloader. For microcode
-* the DVB-T taps from the drxk_filters.h are used.
-*/
-static int SetDVBTStandard(struct drxk_state *state,
-			   enum OperationMode oMode)
-{
-	u16 cmdResult = 0;
-	u16 data = 0;
-	int status;
-
-	dprintk(1, "\n");
-
-	PowerUpDVBT(state);
-	/* added antenna switch */
-	SwitchAntennaToDVBT(state);
-	/* send OFDM reset command */
-	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_RESET, 0, NULL, 1, &cmdResult);
-	if (status < 0)
-		goto error;
-
-	/* send OFDM setenv command */
-	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV, 0, NULL, 1, &cmdResult);
-	if (status < 0)
-		goto error;
-
-	/* reset datapath for OFDM, processors first */
-	status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP);
-	if (status < 0)
-		goto error;
-	status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP);
-	if (status < 0)
-		goto error;
-
-	/* IQM setup */
-	/* synchronize on ofdstate->m_festart */
-	status = write16(state, IQM_AF_UPD_SEL__A, 1);
-	if (status < 0)
-		goto error;
-	/* window size for clipping ADC detection */
-	status = write16(state, IQM_AF_CLP_LEN__A, 0);
-	if (status < 0)
-		goto error;
-	/* window size for for sense pre-SAW detection */
-	status = write16(state, IQM_AF_SNS_LEN__A, 0);
-	if (status < 0)
-		goto error;
-	/* sense threshold for sense pre-SAW detection */
-	status = write16(state, IQM_AF_AMUX__A, IQM_AF_AMUX_SIGNAL2ADC);
-	if (status < 0)
-		goto error;
-	status = SetIqmAf(state, true);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, IQM_AF_AGC_RF__A, 0);
-	if (status < 0)
-		goto error;
-
-	/* Impulse noise cruncher setup */
-	status = write16(state, IQM_AF_INC_LCT__A, 0);	/* crunch in IQM_CF */
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_CF_DET_LCT__A, 0);	/* detect in IQM_CF */
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_CF_WND_LEN__A, 3);	/* peak detector window length */
-	if (status < 0)
-		goto error;
-
-	status = write16(state, IQM_RC_STRETCH__A, 16);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_CF_OUT_ENA__A, 0x4);	/* enable output 2 */
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_CF_DS_ENA__A, 0x4);	/* decimate output 2 */
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_CF_SCALE__A, 1600);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_CF_SCALE_SH__A, 0);
-	if (status < 0)
-		goto error;
-
-	/* virtual clipping threshold for clipping ADC detection */
-	status = write16(state, IQM_AF_CLP_TH__A, 448);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_CF_DATATH__A, 495);	/* crunching threshold */
-	if (status < 0)
-		goto error;
-
-	status = BLChainCmd(state, DRXK_BL_ROM_OFFSET_TAPS_DVBT, DRXK_BLCC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, IQM_CF_PKDTH__A, 2);	/* peak detector threshold */
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_CF_POW_MEAS_LEN__A, 2);
-	if (status < 0)
-		goto error;
-	/* enable power measurement interrupt */
-	status = write16(state, IQM_CF_COMM_INT_MSK__A, 1);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_ACTIVE);
-	if (status < 0)
-		goto error;
-
-	/* IQM will not be reset from here, sync ADC and update/init AGC */
-	status = ADCSynchronization(state);
-	if (status < 0)
-		goto error;
-	status = SetPreSaw(state, &state->m_dvbtPreSawCfg);
-	if (status < 0)
-		goto error;
-
-	/* Halt SCU to enable safe non-atomic accesses */
-	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD);
-	if (status < 0)
-		goto error;
-
-	status = SetAgcRf(state, &state->m_dvbtRfAgcCfg, true);
-	if (status < 0)
-		goto error;
-	status = SetAgcIf(state, &state->m_dvbtIfAgcCfg, true);
-	if (status < 0)
-		goto error;
-
-	/* Set Noise Estimation notch width and enable DC fix */
-	status = read16(state, OFDM_SC_RA_RAM_CONFIG__A, &data);
-	if (status < 0)
-		goto error;
-	data |= OFDM_SC_RA_RAM_CONFIG_NE_FIX_ENABLE__M;
-	status = write16(state, OFDM_SC_RA_RAM_CONFIG__A, data);
-	if (status < 0)
-		goto error;
-
-	/* Activate SCU to enable SCU commands */
-	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
-	if (status < 0)
-		goto error;
-
-	if (!state->m_DRXK_A3_ROM_CODE) {
-		/* AGCInit() is not done for DVBT, so set agcFastClipCtrlDelay  */
-		status = write16(state, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A, state->m_dvbtIfAgcCfg.FastClipCtrlDelay);
-		if (status < 0)
-			goto error;
-	}
-
-	/* OFDM_SC setup */
-#ifdef COMPILE_FOR_NONRT
-	status = write16(state, OFDM_SC_RA_RAM_BE_OPT_DELAY__A, 1);
-	if (status < 0)
-		goto error;
-	status = write16(state, OFDM_SC_RA_RAM_BE_OPT_INIT_DELAY__A, 2);
-	if (status < 0)
-		goto error;
-#endif
-
-	/* FEC setup */
-	status = write16(state, FEC_DI_INPUT_CTL__A, 1);	/* OFDM input */
-	if (status < 0)
-		goto error;
-
-
-#ifdef COMPILE_FOR_NONRT
-	status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, 0x400);
-	if (status < 0)
-		goto error;
-#else
-	status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, 0x1000);
-	if (status < 0)
-		goto error;
-#endif
-	status = write16(state, FEC_RS_MEASUREMENT_PRESCALE__A, 0x0001);
-	if (status < 0)
-		goto error;
-
-	/* Setup MPEG bus */
-	status = MPEGTSDtoSetup(state, OM_DVBT);
-	if (status < 0)
-		goto error;
-	/* Set DVBT Presets */
-	status = DVBTActivatePresets(state);
-	if (status < 0)
-		goto error;
-
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-/*============================================================================*/
-/**
-* \brief Start dvbt demodulating for channel.
-* \param demod instance of demodulator.
-* \return DRXStatus_t.
-*/
-static int DVBTStart(struct drxk_state *state)
-{
-	u16 param1;
-	int status;
-	/* DRXKOfdmScCmd_t scCmd; */
-
-	dprintk(1, "\n");
-	/* Start correct processes to get in lock */
-	/* DRXK: OFDM_SC_RA_RAM_PROC_LOCKTRACK is no longer in mapfile! */
-	param1 = OFDM_SC_RA_RAM_LOCKTRACK_MIN;
-	status = DVBTScCommand(state, OFDM_SC_RA_RAM_CMD_PROC_START, 0, OFDM_SC_RA_RAM_SW_EVENT_RUN_NMASK__M, param1, 0, 0, 0);
-	if (status < 0)
-		goto error;
-	/* Start FEC OC */
-	status = MPEGTSStart(state);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE);
-	if (status < 0)
-		goto error;
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-
-/*============================================================================*/
-
-/**
-* \brief Set up dvbt demodulator for channel.
-* \param demod instance of demodulator.
-* \return DRXStatus_t.
-* // original DVBTSetChannel()
-*/
-static int SetDVBT(struct drxk_state *state, u16 IntermediateFreqkHz,
-		   s32 tunerFreqOffset)
-{
-	u16 cmdResult = 0;
-	u16 transmissionParams = 0;
-	u16 operationMode = 0;
-	u32 iqmRcRateOfs = 0;
-	u32 bandwidth = 0;
-	u16 param1;
-	int status;
-
-	dprintk(1, "IF =%d, TFO = %d\n", IntermediateFreqkHz, tunerFreqOffset);
-
-	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_STOP, 0, NULL, 1, &cmdResult);
-	if (status < 0)
-		goto error;
-
-	/* Halt SCU to enable safe non-atomic accesses */
-	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD);
-	if (status < 0)
-		goto error;
-
-	/* Stop processors */
-	status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP);
-	if (status < 0)
-		goto error;
-	status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP);
-	if (status < 0)
-		goto error;
-
-	/* Mandatory fix, always stop CP, required to set spl offset back to
-		hardware default (is set to 0 by ucode during pilot detection */
-	status = write16(state, OFDM_CP_COMM_EXEC__A, OFDM_CP_COMM_EXEC_STOP);
-	if (status < 0)
-		goto error;
-
-	/*== Write channel settings to device =====================================*/
-
-	/* mode */
-	switch (state->props.transmission_mode) {
-	case TRANSMISSION_MODE_AUTO:
-	default:
-		operationMode |= OFDM_SC_RA_RAM_OP_AUTO_MODE__M;
-		/* fall through , try first guess DRX_FFTMODE_8K */
-	case TRANSMISSION_MODE_8K:
-		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_MODE_8K;
-		break;
-	case TRANSMISSION_MODE_2K:
-		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_MODE_2K;
-		break;
-	}
-
-	/* guard */
-	switch (state->props.guard_interval) {
-	default:
-	case GUARD_INTERVAL_AUTO:
-		operationMode |= OFDM_SC_RA_RAM_OP_AUTO_GUARD__M;
-		/* fall through , try first guess DRX_GUARD_1DIV4 */
-	case GUARD_INTERVAL_1_4:
-		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_4;
-		break;
-	case GUARD_INTERVAL_1_32:
-		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_32;
-		break;
-	case GUARD_INTERVAL_1_16:
-		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_16;
-		break;
-	case GUARD_INTERVAL_1_8:
-		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_8;
-		break;
-	}
-
-	/* hierarchy */
-	switch (state->props.hierarchy) {
-	case HIERARCHY_AUTO:
-	case HIERARCHY_NONE:
-	default:
-		operationMode |= OFDM_SC_RA_RAM_OP_AUTO_HIER__M;
-		/* fall through , try first guess SC_RA_RAM_OP_PARAM_HIER_NO */
-		/* transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_NO; */
-		/* break; */
-	case HIERARCHY_1:
-		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A1;
-		break;
-	case HIERARCHY_2:
-		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A2;
-		break;
-	case HIERARCHY_4:
-		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A4;
-		break;
-	}
-
-
-	/* modulation */
-	switch (state->props.modulation) {
-	case QAM_AUTO:
-	default:
-		operationMode |= OFDM_SC_RA_RAM_OP_AUTO_CONST__M;
-		/* fall through , try first guess DRX_CONSTELLATION_QAM64 */
-	case QAM_64:
-		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM64;
-		break;
-	case QPSK:
-		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QPSK;
-		break;
-	case QAM_16:
-		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM16;
-		break;
-	}
-#if 0
-	/* No hierachical channels support in BDA */
-	/* Priority (only for hierarchical channels) */
-	switch (channel->priority) {
-	case DRX_PRIORITY_LOW:
-		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_LO;
-		WR16(devAddr, OFDM_EC_SB_PRIOR__A,
-			OFDM_EC_SB_PRIOR_LO);
-		break;
-	case DRX_PRIORITY_HIGH:
-		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI;
-		WR16(devAddr, OFDM_EC_SB_PRIOR__A,
-			OFDM_EC_SB_PRIOR_HI));
-		break;
-	case DRX_PRIORITY_UNKNOWN:	/* fall through */
-	default:
-		status = -EINVAL;
-		goto error;
-	}
-#else
-	/* Set Priorty high */
-	transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI;
-	status = write16(state, OFDM_EC_SB_PRIOR__A, OFDM_EC_SB_PRIOR_HI);
-	if (status < 0)
-		goto error;
-#endif
-
-	/* coderate */
-	switch (state->props.code_rate_HP) {
-	case FEC_AUTO:
-	default:
-		operationMode |= OFDM_SC_RA_RAM_OP_AUTO_RATE__M;
-		/* fall through , try first guess DRX_CODERATE_2DIV3 */
-	case FEC_2_3:
-		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_2_3;
-		break;
-	case FEC_1_2:
-		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_1_2;
-		break;
-	case FEC_3_4:
-		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_3_4;
-		break;
-	case FEC_5_6:
-		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_5_6;
-		break;
-	case FEC_7_8:
-		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_7_8;
-		break;
-	}
-
-	/* SAW filter selection: normaly not necesarry, but if wanted
-		the application can select a SAW filter via the driver by using UIOs */
-	/* First determine real bandwidth (Hz) */
-	/* Also set delay for impulse noise cruncher */
-	/* Also set parameters for EC_OC fix, note EC_OC_REG_TMD_HIL_MAR is changed
-		by SC for fix for some 8K,1/8 guard but is restored by InitEC and ResetEC
-		functions */
-	switch (state->props.bandwidth_hz) {
-	case 0:
-		state->props.bandwidth_hz = 8000000;
-		/* fall though */
-	case 8000000:
-		bandwidth = DRXK_BANDWIDTH_8MHZ_IN_HZ;
-		status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, 3052);
-		if (status < 0)
-			goto error;
-		/* cochannel protection for PAL 8 MHz */
-		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, 7);
-		if (status < 0)
-			goto error;
-		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, 7);
-		if (status < 0)
-			goto error;
-		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, 7);
-		if (status < 0)
-			goto error;
-		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, 1);
-		if (status < 0)
-			goto error;
-		break;
-	case 7000000:
-		bandwidth = DRXK_BANDWIDTH_7MHZ_IN_HZ;
-		status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, 3491);
-		if (status < 0)
-			goto error;
-		/* cochannel protection for PAL 7 MHz */
-		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, 8);
-		if (status < 0)
-			goto error;
-		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, 8);
-		if (status < 0)
-			goto error;
-		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, 4);
-		if (status < 0)
-			goto error;
-		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, 1);
-		if (status < 0)
-			goto error;
-		break;
-	case 6000000:
-		bandwidth = DRXK_BANDWIDTH_6MHZ_IN_HZ;
-		status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, 4073);
-		if (status < 0)
-			goto error;
-		/* cochannel protection for NTSC 6 MHz */
-		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, 19);
-		if (status < 0)
-			goto error;
-		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, 19);
-		if (status < 0)
-			goto error;
-		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, 14);
-		if (status < 0)
-			goto error;
-		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, 1);
-		if (status < 0)
-			goto error;
-		break;
-	default:
-		status = -EINVAL;
-		goto error;
-	}
-
-	if (iqmRcRateOfs == 0) {
-		/* Now compute IQM_RC_RATE_OFS
-			(((SysFreq/BandWidth)/2)/2) -1) * 2^23)
-			=>
-			((SysFreq / BandWidth) * (2^21)) - (2^23)
-			*/
-		/* (SysFreq / BandWidth) * (2^28)  */
-		/* assert (MAX(sysClk)/MIN(bandwidth) < 16)
-			=> assert(MAX(sysClk) < 16*MIN(bandwidth))
-			=> assert(109714272 > 48000000) = true so Frac 28 can be used  */
-		iqmRcRateOfs = Frac28a((u32)
-					((state->m_sysClockFreq *
-						1000) / 3), bandwidth);
-		/* (SysFreq / BandWidth) * (2^21), rounding before truncating  */
-		if ((iqmRcRateOfs & 0x7fL) >= 0x40)
-			iqmRcRateOfs += 0x80L;
-		iqmRcRateOfs = iqmRcRateOfs >> 7;
-		/* ((SysFreq / BandWidth) * (2^21)) - (2^23)  */
-		iqmRcRateOfs = iqmRcRateOfs - (1 << 23);
-	}
-
-	iqmRcRateOfs &=
-		((((u32) IQM_RC_RATE_OFS_HI__M) <<
-		IQM_RC_RATE_OFS_LO__W) | IQM_RC_RATE_OFS_LO__M);
-	status = write32(state, IQM_RC_RATE_OFS_LO__A, iqmRcRateOfs);
-	if (status < 0)
-		goto error;
-
-	/* Bandwidth setting done */
-
-#if 0
-	status = DVBTSetFrequencyShift(demod, channel, tunerOffset);
-	if (status < 0)
-		goto error;
-#endif
-	status = SetFrequencyShifter(state, IntermediateFreqkHz, tunerFreqOffset, true);
-	if (status < 0)
-		goto error;
-
-	/*== Start SC, write channel settings to SC ===============================*/
-
-	/* Activate SCU to enable SCU commands */
-	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
-	if (status < 0)
-		goto error;
-
-	/* Enable SC after setting all other parameters */
-	status = write16(state, OFDM_SC_COMM_STATE__A, 0);
-	if (status < 0)
-		goto error;
-	status = write16(state, OFDM_SC_COMM_EXEC__A, 1);
-	if (status < 0)
-		goto error;
-
-
-	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_START, 0, NULL, 1, &cmdResult);
-	if (status < 0)
-		goto error;
-
-	/* Write SC parameter registers, set all AUTO flags in operation mode */
-	param1 = (OFDM_SC_RA_RAM_OP_AUTO_MODE__M |
-			OFDM_SC_RA_RAM_OP_AUTO_GUARD__M |
-			OFDM_SC_RA_RAM_OP_AUTO_CONST__M |
-			OFDM_SC_RA_RAM_OP_AUTO_HIER__M |
-			OFDM_SC_RA_RAM_OP_AUTO_RATE__M);
-	status = DVBTScCommand(state, OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM,
-				0, transmissionParams, param1, 0, 0, 0);
-	if (status < 0)
-		goto error;
-
-	if (!state->m_DRXK_A3_ROM_CODE)
-		status = DVBTCtrlSetSqiSpeed(state, &state->m_sqiSpeed);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-
-	return status;
-}
-
-
-/*============================================================================*/
-
-/**
-* \brief Retreive lock status .
-* \param demod    Pointer to demodulator instance.
-* \param lockStat Pointer to lock status structure.
-* \return DRXStatus_t.
-*
-*/
-static int GetDVBTLockStatus(struct drxk_state *state, u32 *pLockStatus)
-{
-	int status;
-	const u16 mpeg_lock_mask = (OFDM_SC_RA_RAM_LOCK_MPEG__M |
-				    OFDM_SC_RA_RAM_LOCK_FEC__M);
-	const u16 fec_lock_mask = (OFDM_SC_RA_RAM_LOCK_FEC__M);
-	const u16 demod_lock_mask = OFDM_SC_RA_RAM_LOCK_DEMOD__M;
-
-	u16 ScRaRamLock = 0;
-	u16 ScCommExec = 0;
-
-	dprintk(1, "\n");
-
-	*pLockStatus = NOT_LOCKED;
-	/* driver 0.9.0 */
-	/* Check if SC is running */
-	status = read16(state, OFDM_SC_COMM_EXEC__A, &ScCommExec);
-	if (status < 0)
-		goto end;
-	if (ScCommExec == OFDM_SC_COMM_EXEC_STOP)
-		goto end;
-
-	status = read16(state, OFDM_SC_RA_RAM_LOCK__A, &ScRaRamLock);
-	if (status < 0)
-		goto end;
-
-	if ((ScRaRamLock & mpeg_lock_mask) == mpeg_lock_mask)
-		*pLockStatus = MPEG_LOCK;
-	else if ((ScRaRamLock & fec_lock_mask) == fec_lock_mask)
-		*pLockStatus = FEC_LOCK;
-	else if ((ScRaRamLock & demod_lock_mask) == demod_lock_mask)
-		*pLockStatus = DEMOD_LOCK;
-	else if (ScRaRamLock & OFDM_SC_RA_RAM_LOCK_NODVBT__M)
-		*pLockStatus = NEVER_LOCK;
-end:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-
-	return status;
-}
-
-static int PowerUpQAM(struct drxk_state *state)
-{
-	enum DRXPowerMode powerMode = DRXK_POWER_DOWN_OFDM;
-	int status;
-
-	dprintk(1, "\n");
-	status = CtrlPowerMode(state, &powerMode);
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-
-	return status;
-}
-
-
-/** Power Down QAM */
-static int PowerDownQAM(struct drxk_state *state)
-{
-	u16 data = 0;
-	u16 cmdResult;
-	int status = 0;
-
-	dprintk(1, "\n");
-	status = read16(state, SCU_COMM_EXEC__A, &data);
-	if (status < 0)
-		goto error;
-	if (data == SCU_COMM_EXEC_ACTIVE) {
-		/*
-			STOP demodulator
-			QAM and HW blocks
-			*/
-		/* stop all comstate->m_exec */
-		status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP);
-		if (status < 0)
-			goto error;
-		status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_STOP, 0, NULL, 1, &cmdResult);
-		if (status < 0)
-			goto error;
-	}
-	/* powerdown AFE                   */
-	status = SetIqmAf(state, false);
-
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-
-	return status;
-}
-
-/*============================================================================*/
-
-/**
-* \brief Setup of the QAM Measurement intervals for signal quality
-* \param demod instance of demod.
-* \param modulation current modulation.
-* \return DRXStatus_t.
-*
-*  NOTE:
-*  Take into account that for certain settings the errorcounters can overflow.
-*  The implementation does not check this.
-*
-*/
-static int SetQAMMeasurement(struct drxk_state *state,
-			     enum EDrxkConstellation modulation,
-			     u32 symbolRate)
-{
-	u32 fecBitsDesired = 0;	/* BER accounting period */
-	u32 fecRsPeriodTotal = 0;	/* Total period */
-	u16 fecRsPrescale = 0;	/* ReedSolomon Measurement Prescale */
-	u16 fecRsPeriod = 0;	/* Value for corresponding I2C register */
-	int status = 0;
-
-	dprintk(1, "\n");
-
-	fecRsPrescale = 1;
-	/* fecBitsDesired = symbolRate [kHz] *
-		FrameLenght [ms] *
-		(modulation + 1) *
-		SyncLoss (== 1) *
-		ViterbiLoss (==1)
-		*/
-	switch (modulation) {
-	case DRX_CONSTELLATION_QAM16:
-		fecBitsDesired = 4 * symbolRate;
-		break;
-	case DRX_CONSTELLATION_QAM32:
-		fecBitsDesired = 5 * symbolRate;
-		break;
-	case DRX_CONSTELLATION_QAM64:
-		fecBitsDesired = 6 * symbolRate;
-		break;
-	case DRX_CONSTELLATION_QAM128:
-		fecBitsDesired = 7 * symbolRate;
-		break;
-	case DRX_CONSTELLATION_QAM256:
-		fecBitsDesired = 8 * symbolRate;
-		break;
-	default:
-		status = -EINVAL;
-	}
-	if (status < 0)
-		goto error;
-
-	fecBitsDesired /= 1000;	/* symbolRate [Hz] -> symbolRate [kHz]  */
-	fecBitsDesired *= 500;	/* meas. period [ms] */
-
-	/* Annex A/C: bits/RsPeriod = 204 * 8 = 1632 */
-	/* fecRsPeriodTotal = fecBitsDesired / 1632 */
-	fecRsPeriodTotal = (fecBitsDesired / 1632UL) + 1;	/* roughly ceil */
-
-	/* fecRsPeriodTotal =  fecRsPrescale * fecRsPeriod  */
-	fecRsPrescale = 1 + (u16) (fecRsPeriodTotal >> 16);
-	if (fecRsPrescale == 0) {
-		/* Divide by zero (though impossible) */
-		status = -EINVAL;
-		if (status < 0)
-			goto error;
-	}
-	fecRsPeriod =
-		((u16) fecRsPeriodTotal +
-		(fecRsPrescale >> 1)) / fecRsPrescale;
-
-	/* write corresponding registers */
-	status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, fecRsPeriod);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_RS_MEASUREMENT_PRESCALE__A, fecRsPrescale);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_OC_SNC_FAIL_PERIOD__A, fecRsPeriod);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int SetQAM16(struct drxk_state *state)
-{
-	int status = 0;
-
-	dprintk(1, "\n");
-	/* QAM Equalizer Setup */
-	/* Equalizer */
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 13517);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 13517);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 13517);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 13517);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13517);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 13517);
-	if (status < 0)
-		goto error;
-	/* Decision Feedback Equalizer */
-	status = write16(state, QAM_DQ_QUAL_FUN0__A, 2);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN1__A, 2);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN2__A, 2);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN3__A, 2);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN4__A, 2);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, QAM_SY_SYNC_HWM__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_SY_SYNC_AWM__A, 4);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_SY_SYNC_LWM__A, 3);
-	if (status < 0)
-		goto error;
-
-	/* QAM Slicer Settings */
-	status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM16);
-	if (status < 0)
-		goto error;
-
-	/* QAM Loop Controller Coeficients */
-	status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 80);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 20);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 16);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 32);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10);
-	if (status < 0)
-		goto error;
-
-
-	/* QAM State Machine (FSM) Thresholds */
-
-	status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 140);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 50);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 95);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 120);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 230);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 105);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 24);
-	if (status < 0)
-		goto error;
-
-
-	/* QAM FSM Tracking Parameters */
-
-	status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 16);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 220);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 25);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 6);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -24);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -65);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -127);
-	if (status < 0)
-		goto error;
-
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-/*============================================================================*/
-
-/**
-* \brief QAM32 specific setup
-* \param demod instance of demod.
-* \return DRXStatus_t.
-*/
-static int SetQAM32(struct drxk_state *state)
-{
-	int status = 0;
-
-	dprintk(1, "\n");
-
-	/* QAM Equalizer Setup */
-	/* Equalizer */
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 6707);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 6707);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 6707);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 6707);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 6707);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 6707);
-	if (status < 0)
-		goto error;
-
-	/* Decision Feedback Equalizer */
-	status = write16(state, QAM_DQ_QUAL_FUN0__A, 3);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN1__A, 3);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN2__A, 3);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN3__A, 3);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN4__A, 3);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, QAM_SY_SYNC_HWM__A, 6);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_SY_SYNC_AWM__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_SY_SYNC_LWM__A, 3);
-	if (status < 0)
-		goto error;
-
-	/* QAM Slicer Settings */
-
-	status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM32);
-	if (status < 0)
-		goto error;
-
-
-	/* QAM Loop Controller Coeficients */
-
-	status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 80);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 20);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 16);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 16);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 0);
-	if (status < 0)
-		goto error;
-
-
-	/* QAM State Machine (FSM) Thresholds */
-
-	status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 90);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 50);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 170);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 100);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 10);
-	if (status < 0)
-		goto error;
-
-
-	/* QAM FSM Tracking Parameters */
-
-	status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 12);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 140);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) -8);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) -16);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -26);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -56);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -86);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-/*============================================================================*/
-
-/**
-* \brief QAM64 specific setup
-* \param demod instance of demod.
-* \return DRXStatus_t.
-*/
-static int SetQAM64(struct drxk_state *state)
-{
-	int status = 0;
-
-	dprintk(1, "\n");
-	/* QAM Equalizer Setup */
-	/* Equalizer */
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 13336);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 12618);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 11988);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 13809);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13809);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 15609);
-	if (status < 0)
-		goto error;
-
-	/* Decision Feedback Equalizer */
-	status = write16(state, QAM_DQ_QUAL_FUN0__A, 4);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN1__A, 4);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN2__A, 4);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN3__A, 4);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN4__A, 3);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, QAM_SY_SYNC_HWM__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_SY_SYNC_AWM__A, 4);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_SY_SYNC_LWM__A, 3);
-	if (status < 0)
-		goto error;
-
-	/* QAM Slicer Settings */
-	status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM64);
-	if (status < 0)
-		goto error;
-
-
-	/* QAM Loop Controller Coeficients */
-
-	status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 30);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 100);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 30);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 48);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10);
-	if (status < 0)
-		goto error;
-
-
-	/* QAM State Machine (FSM) Thresholds */
-
-	status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 100);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 110);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 200);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 95);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 15);
-	if (status < 0)
-		goto error;
-
-
-	/* QAM FSM Tracking Parameters */
-
-	status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 12);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 141);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 7);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 0);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -15);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -45);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -80);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-
-	return status;
-}
-
-/*============================================================================*/
-
-/**
-* \brief QAM128 specific setup
-* \param demod: instance of demod.
-* \return DRXStatus_t.
-*/
-static int SetQAM128(struct drxk_state *state)
-{
-	int status = 0;
-
-	dprintk(1, "\n");
-	/* QAM Equalizer Setup */
-	/* Equalizer */
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 6564);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 6598);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 6394);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 6409);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 6656);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 7238);
-	if (status < 0)
-		goto error;
-
-	/* Decision Feedback Equalizer */
-	status = write16(state, QAM_DQ_QUAL_FUN0__A, 6);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN1__A, 6);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN2__A, 6);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN3__A, 6);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN4__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, QAM_SY_SYNC_HWM__A, 6);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_SY_SYNC_AWM__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_SY_SYNC_LWM__A, 3);
-	if (status < 0)
-		goto error;
-
-
-	/* QAM Slicer Settings */
-
-	status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM128);
-	if (status < 0)
-		goto error;
-
-
-	/* QAM Loop Controller Coeficients */
-
-	status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 40);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 120);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 40);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 60);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 64);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 0);
-	if (status < 0)
-		goto error;
-
-
-	/* QAM State Machine (FSM) Thresholds */
-
-	status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 50);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 140);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 100);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 5);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 12);
-	if (status < 0)
-		goto error;
-
-	/* QAM FSM Tracking Parameters */
-
-	status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 8);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 65);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 3);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -1);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -12);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -23);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-
-	return status;
-}
-
-/*============================================================================*/
-
-/**
-* \brief QAM256 specific setup
-* \param demod: instance of demod.
-* \return DRXStatus_t.
-*/
-static int SetQAM256(struct drxk_state *state)
-{
-	int status = 0;
-
-	dprintk(1, "\n");
-	/* QAM Equalizer Setup */
-	/* Equalizer */
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 11502);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 12084);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 12543);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 12931);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13629);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 15385);
-	if (status < 0)
-		goto error;
-
-	/* Decision Feedback Equalizer */
-	status = write16(state, QAM_DQ_QUAL_FUN0__A, 8);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN1__A, 8);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN2__A, 8);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN3__A, 8);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN4__A, 6);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, QAM_SY_SYNC_HWM__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_SY_SYNC_AWM__A, 4);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_SY_SYNC_LWM__A, 3);
-	if (status < 0)
-		goto error;
-
-	/* QAM Slicer Settings */
-
-	status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM256);
-	if (status < 0)
-		goto error;
-
-
-	/* QAM Loop Controller Coeficients */
-
-	status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 50);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 250);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 50);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 125);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 48);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10);
-	if (status < 0)
-		goto error;
-
-
-	/* QAM State Machine (FSM) Thresholds */
-
-	status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 50);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 150);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 110);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 12);
-	if (status < 0)
-		goto error;
-
-
-	/* QAM FSM Tracking Parameters */
-
-	status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 8);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 74);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 18);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 13);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) 7);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) 0);
-	if (status < 0)
-		goto error;
-	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -8);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-
-/*============================================================================*/
-/**
-* \brief Reset QAM block.
-* \param demod:   instance of demod.
-* \param channel: pointer to channel data.
-* \return DRXStatus_t.
-*/
-static int QAMResetQAM(struct drxk_state *state)
-{
-	int status;
-	u16 cmdResult;
-
-	dprintk(1, "\n");
-	/* Stop QAM comstate->m_exec */
-	status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP);
-	if (status < 0)
-		goto error;
-
-	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_RESET, 0, NULL, 1, &cmdResult);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-/*============================================================================*/
-
-/**
-* \brief Set QAM symbolrate.
-* \param demod:   instance of demod.
-* \param channel: pointer to channel data.
-* \return DRXStatus_t.
-*/
-static int QAMSetSymbolrate(struct drxk_state *state)
-{
-	u32 adcFrequency = 0;
-	u32 symbFreq = 0;
-	u32 iqmRcRate = 0;
-	u16 ratesel = 0;
-	u32 lcSymbRate = 0;
-	int status;
-
-	dprintk(1, "\n");
-	/* Select & calculate correct IQM rate */
-	adcFrequency = (state->m_sysClockFreq * 1000) / 3;
-	ratesel = 0;
-	/* printk(KERN_DEBUG "drxk: SR %d\n", state->props.symbol_rate); */
-	if (state->props.symbol_rate <= 1188750)
-		ratesel = 3;
-	else if (state->props.symbol_rate <= 2377500)
-		ratesel = 2;
-	else if (state->props.symbol_rate <= 4755000)
-		ratesel = 1;
-	status = write16(state, IQM_FD_RATESEL__A, ratesel);
-	if (status < 0)
-		goto error;
-
-	/*
-		IqmRcRate = ((Fadc / (symbolrate * (4<<ratesel))) - 1) * (1<<23)
-		*/
-	symbFreq = state->props.symbol_rate * (1 << ratesel);
-	if (symbFreq == 0) {
-		/* Divide by zero */
-		status = -EINVAL;
-		goto error;
-	}
-	iqmRcRate = (adcFrequency / symbFreq) * (1 << 21) +
-		(Frac28a((adcFrequency % symbFreq), symbFreq) >> 7) -
-		(1 << 23);
-	status = write32(state, IQM_RC_RATE_OFS_LO__A, iqmRcRate);
-	if (status < 0)
-		goto error;
-	state->m_iqmRcRate = iqmRcRate;
-	/*
-		LcSymbFreq = round (.125 *  symbolrate / adcFreq * (1<<15))
-		*/
-	symbFreq = state->props.symbol_rate;
-	if (adcFrequency == 0) {
-		/* Divide by zero */
-		status = -EINVAL;
-		goto error;
-	}
-	lcSymbRate = (symbFreq / adcFrequency) * (1 << 12) +
-		(Frac28a((symbFreq % adcFrequency), adcFrequency) >>
-		16);
-	if (lcSymbRate > 511)
-		lcSymbRate = 511;
-	status = write16(state, QAM_LC_SYMBOL_FREQ__A, (u16) lcSymbRate);
-
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-/*============================================================================*/
-
-/**
-* \brief Get QAM lock status.
-* \param demod:   instance of demod.
-* \param channel: pointer to channel data.
-* \return DRXStatus_t.
-*/
-
-static int GetQAMLockStatus(struct drxk_state *state, u32 *pLockStatus)
-{
-	int status;
-	u16 Result[2] = { 0, 0 };
-
-	dprintk(1, "\n");
-	*pLockStatus = NOT_LOCKED;
-	status = scu_command(state,
-			SCU_RAM_COMMAND_STANDARD_QAM |
-			SCU_RAM_COMMAND_CMD_DEMOD_GET_LOCK, 0, NULL, 2,
-			Result);
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-
-	if (Result[1] < SCU_RAM_QAM_LOCKED_LOCKED_DEMOD_LOCKED) {
-		/* 0x0000 NOT LOCKED */
-	} else if (Result[1] < SCU_RAM_QAM_LOCKED_LOCKED_LOCKED) {
-		/* 0x4000 DEMOD LOCKED */
-		*pLockStatus = DEMOD_LOCK;
-	} else if (Result[1] < SCU_RAM_QAM_LOCKED_LOCKED_NEVER_LOCK) {
-		/* 0x8000 DEMOD + FEC LOCKED (system lock) */
-		*pLockStatus = MPEG_LOCK;
-	} else {
-		/* 0xC000 NEVER LOCKED */
-		/* (system will never be able to lock to the signal) */
-		/* TODO: check this, intermediate & standard specific lock states are not
-		   taken into account here */
-		*pLockStatus = NEVER_LOCK;
-	}
-	return status;
-}
-
-#define QAM_MIRROR__M         0x03
-#define QAM_MIRROR_NORMAL     0x00
-#define QAM_MIRRORED          0x01
-#define QAM_MIRROR_AUTO_ON    0x02
-#define QAM_LOCKRANGE__M      0x10
-#define QAM_LOCKRANGE_NORMAL  0x10
-
-static int QAMDemodulatorCommand(struct drxk_state *state,
-				 int numberOfParameters)
-{
-	int status;
-	u16 cmdResult;
-	u16 setParamParameters[4] = { 0, 0, 0, 0 };
-
-	setParamParameters[0] = state->m_Constellation;	/* modulation     */
-	setParamParameters[1] = DRXK_QAM_I12_J17;	/* interleave mode   */
-
-	if (numberOfParameters == 2) {
-		u16 setEnvParameters[1] = { 0 };
-
-		if (state->m_OperationMode == OM_QAM_ITU_C)
-			setEnvParameters[0] = QAM_TOP_ANNEX_C;
-		else
-			setEnvParameters[0] = QAM_TOP_ANNEX_A;
-
-		status = scu_command(state,
-				     SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV,
-				     1, setEnvParameters, 1, &cmdResult);
-		if (status < 0)
-			goto error;
-
-		status = scu_command(state,
-				     SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM,
-				     numberOfParameters, setParamParameters,
-				     1, &cmdResult);
-	} else if (numberOfParameters == 4) {
-		if (state->m_OperationMode == OM_QAM_ITU_C)
-			setParamParameters[2] = QAM_TOP_ANNEX_C;
-		else
-			setParamParameters[2] = QAM_TOP_ANNEX_A;
-
-		setParamParameters[3] |= (QAM_MIRROR_AUTO_ON);
-		/* Env parameters */
-		/* check for LOCKRANGE Extented */
-		/* setParamParameters[3] |= QAM_LOCKRANGE_NORMAL; */
-
-		status = scu_command(state,
-				     SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM,
-				     numberOfParameters, setParamParameters,
-				     1, &cmdResult);
-	} else {
-		printk(KERN_WARNING "drxk: Unknown QAM demodulator parameter "
-			"count %d\n", numberOfParameters);
-	}
-
-error:
-	if (status < 0)
-		printk(KERN_WARNING "drxk: Warning %d on %s\n",
-		       status, __func__);
-	return status;
-}
-
-static int SetQAM(struct drxk_state *state, u16 IntermediateFreqkHz,
-		  s32 tunerFreqOffset)
-{
-	int status;
-	u16 cmdResult;
-	int qamDemodParamCount = state->qam_demod_parameter_count;
-
-	dprintk(1, "\n");
-	/*
-	 * STEP 1: reset demodulator
-	 *	resets FEC DI and FEC RS
-	 *	resets QAM block
-	 *	resets SCU variables
-	 */
-	status = write16(state, FEC_DI_COMM_EXEC__A, FEC_DI_COMM_EXEC_STOP);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_RS_COMM_EXEC__A, FEC_RS_COMM_EXEC_STOP);
-	if (status < 0)
-		goto error;
-	status = QAMResetQAM(state);
-	if (status < 0)
-		goto error;
-
-	/*
-	 * STEP 2: configure demodulator
-	 *	-set params; resets IQM,QAM,FEC HW; initializes some
-	 *       SCU variables
-	 */
-	status = QAMSetSymbolrate(state);
-	if (status < 0)
-		goto error;
-
-	/* Set params */
-	switch (state->props.modulation) {
-	case QAM_256:
-		state->m_Constellation = DRX_CONSTELLATION_QAM256;
-		break;
-	case QAM_AUTO:
-	case QAM_64:
-		state->m_Constellation = DRX_CONSTELLATION_QAM64;
-		break;
-	case QAM_16:
-		state->m_Constellation = DRX_CONSTELLATION_QAM16;
-		break;
-	case QAM_32:
-		state->m_Constellation = DRX_CONSTELLATION_QAM32;
-		break;
-	case QAM_128:
-		state->m_Constellation = DRX_CONSTELLATION_QAM128;
-		break;
-	default:
-		status = -EINVAL;
-		break;
-	}
-	if (status < 0)
-		goto error;
-
-	/* Use the 4-parameter if it's requested or we're probing for
-	 * the correct command. */
-	if (state->qam_demod_parameter_count == 4
-		|| !state->qam_demod_parameter_count) {
-		qamDemodParamCount = 4;
-		status = QAMDemodulatorCommand(state, qamDemodParamCount);
-	}
-
-	/* Use the 2-parameter command if it was requested or if we're
-	 * probing for the correct command and the 4-parameter command
-	 * failed. */
-	if (state->qam_demod_parameter_count == 2
-		|| (!state->qam_demod_parameter_count && status < 0)) {
-		qamDemodParamCount = 2;
-		status = QAMDemodulatorCommand(state, qamDemodParamCount);
-	}
-
-	if (status < 0) {
-		dprintk(1, "Could not set demodulator parameters. Make "
-			"sure qam_demod_parameter_count (%d) is correct for "
-			"your firmware (%s).\n",
-			state->qam_demod_parameter_count,
-			state->microcode_name);
-		goto error;
-	} else if (!state->qam_demod_parameter_count) {
-		dprintk(1, "Auto-probing the correct QAM demodulator command "
-			"parameters was successful - using %d parameters.\n",
-			qamDemodParamCount);
-
-		/*
-		 * One of our commands was successful. We don't need to
-		 * auto-probe anymore, now that we got the correct command.
-		 */
-		state->qam_demod_parameter_count = qamDemodParamCount;
-	}
-
-	/*
-	 * STEP 3: enable the system in a mode where the ADC provides valid
-	 * signal setup modulation independent registers
-	 */
-#if 0
-	status = SetFrequency(channel, tunerFreqOffset));
-	if (status < 0)
-		goto error;
-#endif
-	status = SetFrequencyShifter(state, IntermediateFreqkHz, tunerFreqOffset, true);
-	if (status < 0)
-		goto error;
-
-	/* Setup BER measurement */
-	status = SetQAMMeasurement(state, state->m_Constellation, state->props.symbol_rate);
-	if (status < 0)
-		goto error;
-
-	/* Reset default values */
-	status = write16(state, IQM_CF_SCALE_SH__A, IQM_CF_SCALE_SH__PRE);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_SY_TIMEOUT__A, QAM_SY_TIMEOUT__PRE);
-	if (status < 0)
-		goto error;
-
-	/* Reset default LC values */
-	status = write16(state, QAM_LC_RATE_LIMIT__A, 3);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_LC_LPF_FACTORP__A, 4);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_LC_LPF_FACTORI__A, 4);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_LC_MODE__A, 7);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, QAM_LC_QUAL_TAB0__A, 1);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_LC_QUAL_TAB1__A, 1);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_LC_QUAL_TAB2__A, 1);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_LC_QUAL_TAB3__A, 1);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_LC_QUAL_TAB4__A, 2);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_LC_QUAL_TAB5__A, 2);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_LC_QUAL_TAB6__A, 2);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_LC_QUAL_TAB8__A, 2);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_LC_QUAL_TAB9__A, 2);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_LC_QUAL_TAB10__A, 2);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_LC_QUAL_TAB12__A, 2);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_LC_QUAL_TAB15__A, 3);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_LC_QUAL_TAB16__A, 3);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_LC_QUAL_TAB20__A, 4);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_LC_QUAL_TAB25__A, 4);
-	if (status < 0)
-		goto error;
-
-	/* Mirroring, QAM-block starting point not inverted */
-	status = write16(state, QAM_SY_SP_INV__A, QAM_SY_SP_INV_SPECTRUM_INV_DIS);
-	if (status < 0)
-		goto error;
-
-	/* Halt SCU to enable safe non-atomic accesses */
-	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD);
-	if (status < 0)
-		goto error;
-
-	/* STEP 4: modulation specific setup */
-	switch (state->props.modulation) {
-	case QAM_16:
-		status = SetQAM16(state);
-		break;
-	case QAM_32:
-		status = SetQAM32(state);
-		break;
-	case QAM_AUTO:
-	case QAM_64:
-		status = SetQAM64(state);
-		break;
-	case QAM_128:
-		status = SetQAM128(state);
-		break;
-	case QAM_256:
-		status = SetQAM256(state);
-		break;
-	default:
-		status = -EINVAL;
-		break;
-	}
-	if (status < 0)
-		goto error;
-
-	/* Activate SCU to enable SCU commands */
-	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
-	if (status < 0)
-		goto error;
-
-	/* Re-configure MPEG output, requires knowledge of channel bitrate */
-	/* extAttr->currentChannel.modulation = channel->modulation; */
-	/* extAttr->currentChannel.symbolrate    = channel->symbolrate; */
-	status = MPEGTSDtoSetup(state, state->m_OperationMode);
-	if (status < 0)
-		goto error;
-
-	/* Start processes */
-	status = MPEGTSStart(state);
-	if (status < 0)
-		goto error;
-	status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE);
-	if (status < 0)
-		goto error;
-	status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_ACTIVE);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_ACTIVE);
-	if (status < 0)
-		goto error;
-
-	/* STEP 5: start QAM demodulator (starts FEC, QAM and IQM HW) */
-	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_START, 0, NULL, 1, &cmdResult);
-	if (status < 0)
-		goto error;
-
-	/* update global DRXK data container */
-/*?     extAttr->qamInterleaveMode = DRXK_QAM_I12_J17; */
-
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int SetQAMStandard(struct drxk_state *state,
-			  enum OperationMode oMode)
-{
-	int status;
-#ifdef DRXK_QAM_TAPS
-#define DRXK_QAMA_TAPS_SELECT
-#include "drxk_filters.h"
-#undef DRXK_QAMA_TAPS_SELECT
-#endif
-
-	dprintk(1, "\n");
-
-	/* added antenna switch */
-	SwitchAntennaToQAM(state);
-
-	/* Ensure correct power-up mode */
-	status = PowerUpQAM(state);
-	if (status < 0)
-		goto error;
-	/* Reset QAM block */
-	status = QAMResetQAM(state);
-	if (status < 0)
-		goto error;
-
-	/* Setup IQM */
-
-	status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_AF_AMUX__A, IQM_AF_AMUX_SIGNAL2ADC);
-	if (status < 0)
-		goto error;
-
-	/* Upload IQM Channel Filter settings by
-		boot loader from ROM table */
-	switch (oMode) {
-	case OM_QAM_ITU_A:
-		status = BLChainCmd(state, DRXK_BL_ROM_OFFSET_TAPS_ITU_A, DRXK_BLCC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT);
-		break;
-	case OM_QAM_ITU_C:
-		status = BLDirectCmd(state, IQM_CF_TAP_RE0__A, DRXK_BL_ROM_OFFSET_TAPS_ITU_C, DRXK_BLDC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT);
-		if (status < 0)
-			goto error;
-		status = BLDirectCmd(state, IQM_CF_TAP_IM0__A, DRXK_BL_ROM_OFFSET_TAPS_ITU_C, DRXK_BLDC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT);
-		break;
-	default:
-		status = -EINVAL;
-	}
-	if (status < 0)
-		goto error;
-
-	status = write16(state, IQM_CF_OUT_ENA__A, (1 << IQM_CF_OUT_ENA_QAM__B));
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_CF_SYMMETRIC__A, 0);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_CF_MIDTAP__A, ((1 << IQM_CF_MIDTAP_RE__B) | (1 << IQM_CF_MIDTAP_IM__B)));
-	if (status < 0)
-		goto error;
-
-	status = write16(state, IQM_RC_STRETCH__A, 21);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_AF_CLP_LEN__A, 0);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_AF_CLP_TH__A, 448);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_AF_SNS_LEN__A, 0);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_CF_POW_MEAS_LEN__A, 0);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, IQM_FS_ADJ_SEL__A, 1);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_RC_ADJ_SEL__A, 1);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_CF_ADJ_SEL__A, 1);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_AF_UPD_SEL__A, 0);
-	if (status < 0)
-		goto error;
-
-	/* IQM Impulse Noise Processing Unit */
-	status = write16(state, IQM_CF_CLP_VAL__A, 500);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_CF_DATATH__A, 1000);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_CF_BYPASSDET__A, 1);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_CF_DET_LCT__A, 0);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_CF_WND_LEN__A, 1);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_CF_PKDTH__A, 1);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_AF_INC_BYPASS__A, 1);
-	if (status < 0)
-		goto error;
-
-	/* turn on IQMAF. Must be done before setAgc**() */
-	status = SetIqmAf(state, true);
-	if (status < 0)
-		goto error;
-	status = write16(state, IQM_AF_START_LOCK__A, 0x01);
-	if (status < 0)
-		goto error;
-
-	/* IQM will not be reset from here, sync ADC and update/init AGC */
-	status = ADCSynchronization(state);
-	if (status < 0)
-		goto error;
-
-	/* Set the FSM step period */
-	status = write16(state, SCU_RAM_QAM_FSM_STEP_PERIOD__A, 2000);
-	if (status < 0)
-		goto error;
-
-	/* Halt SCU to enable safe non-atomic accesses */
-	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD);
-	if (status < 0)
-		goto error;
-
-	/* No more resets of the IQM, current standard correctly set =>
-		now AGCs can be configured. */
-
-	status = InitAGC(state, true);
-	if (status < 0)
-		goto error;
-	status = SetPreSaw(state, &(state->m_qamPreSawCfg));
-	if (status < 0)
-		goto error;
-
-	/* Configure AGC's */
-	status = SetAgcRf(state, &(state->m_qamRfAgcCfg), true);
-	if (status < 0)
-		goto error;
-	status = SetAgcIf(state, &(state->m_qamIfAgcCfg), true);
-	if (status < 0)
-		goto error;
-
-	/* Activate SCU to enable SCU commands */
-	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int WriteGPIO(struct drxk_state *state)
-{
-	int status;
-	u16 value = 0;
-
-	dprintk(1, "\n");
-	/* stop lock indicator process */
-	status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
-	if (status < 0)
-		goto error;
-
-	/*  Write magic word to enable pdr reg write               */
-	status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY);
-	if (status < 0)
-		goto error;
-
-	if (state->m_hasSAWSW) {
-		if (state->UIO_mask & 0x0001) { /* UIO-1 */
-			/* write to io pad configuration register - output mode */
-			status = write16(state, SIO_PDR_SMA_TX_CFG__A, state->m_GPIOCfg);
-			if (status < 0)
-				goto error;
-
-			/* use corresponding bit in io data output registar */
-			status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value);
-			if (status < 0)
-				goto error;
-			if ((state->m_GPIO & 0x0001) == 0)
-				value &= 0x7FFF;	/* write zero to 15th bit - 1st UIO */
-			else
-				value |= 0x8000;	/* write one to 15th bit - 1st UIO */
-			/* write back to io data output register */
-			status = write16(state, SIO_PDR_UIO_OUT_LO__A, value);
-			if (status < 0)
-				goto error;
-		}
-		if (state->UIO_mask & 0x0002) { /* UIO-2 */
-			/* write to io pad configuration register - output mode */
-			status = write16(state, SIO_PDR_SMA_RX_CFG__A, state->m_GPIOCfg);
-			if (status < 0)
-				goto error;
-
-			/* use corresponding bit in io data output registar */
-			status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value);
-			if (status < 0)
-				goto error;
-			if ((state->m_GPIO & 0x0002) == 0)
-				value &= 0xBFFF;	/* write zero to 14th bit - 2st UIO */
-			else
-				value |= 0x4000;	/* write one to 14th bit - 2st UIO */
-			/* write back to io data output register */
-			status = write16(state, SIO_PDR_UIO_OUT_LO__A, value);
-			if (status < 0)
-				goto error;
-		}
-		if (state->UIO_mask & 0x0004) { /* UIO-3 */
-			/* write to io pad configuration register - output mode */
-			status = write16(state, SIO_PDR_GPIO_CFG__A, state->m_GPIOCfg);
-			if (status < 0)
-				goto error;
-
-			/* use corresponding bit in io data output registar */
-			status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value);
-			if (status < 0)
-				goto error;
-			if ((state->m_GPIO & 0x0004) == 0)
-				value &= 0xFFFB;            /* write zero to 2nd bit - 3rd UIO */
-			else
-				value |= 0x0004;            /* write one to 2nd bit - 3rd UIO */
-			/* write back to io data output register */
-			status = write16(state, SIO_PDR_UIO_OUT_LO__A, value);
-			if (status < 0)
-				goto error;
-		}
-	}
-	/*  Write magic word to disable pdr reg write               */
-	status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int SwitchAntennaToQAM(struct drxk_state *state)
-{
-	int status = 0;
-	bool gpio_state;
-
-	dprintk(1, "\n");
-
-	if (!state->antenna_gpio)
-		return 0;
-
-	gpio_state = state->m_GPIO & state->antenna_gpio;
-
-	if (state->antenna_dvbt ^ gpio_state) {
-		/* Antenna is on DVB-T mode. Switch */
-		if (state->antenna_dvbt)
-			state->m_GPIO &= ~state->antenna_gpio;
-		else
-			state->m_GPIO |= state->antenna_gpio;
-		status = WriteGPIO(state);
-	}
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-static int SwitchAntennaToDVBT(struct drxk_state *state)
-{
-	int status = 0;
-	bool gpio_state;
-
-	dprintk(1, "\n");
-
-	if (!state->antenna_gpio)
-		return 0;
-
-	gpio_state = state->m_GPIO & state->antenna_gpio;
-
-	if (!(state->antenna_dvbt ^ gpio_state)) {
-		/* Antenna is on DVB-C mode. Switch */
-		if (state->antenna_dvbt)
-			state->m_GPIO |= state->antenna_gpio;
-		else
-			state->m_GPIO &= ~state->antenna_gpio;
-		status = WriteGPIO(state);
-	}
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	return status;
-}
-
-
-static int PowerDownDevice(struct drxk_state *state)
-{
-	/* Power down to requested mode */
-	/* Backup some register settings */
-	/* Set pins with possible pull-ups connected to them in input mode */
-	/* Analog power down */
-	/* ADC power down */
-	/* Power down device */
-	int status;
-
-	dprintk(1, "\n");
-	if (state->m_bPDownOpenBridge) {
-		/* Open I2C bridge before power down of DRXK */
-		status = ConfigureI2CBridge(state, true);
-		if (status < 0)
-			goto error;
-	}
-	/* driver 0.9.0 */
-	status = DVBTEnableOFDMTokenRing(state, false);
-	if (status < 0)
-		goto error;
-
-	status = write16(state, SIO_CC_PWD_MODE__A, SIO_CC_PWD_MODE_LEVEL_CLOCK);
-	if (status < 0)
-		goto error;
-	status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY);
-	if (status < 0)
-		goto error;
-	state->m_HICfgCtrl |= SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ;
-	status = HI_CfgCommand(state);
-error:
-	if (status < 0)
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-
-	return status;
-}
-
-static int init_drxk(struct drxk_state *state)
-{
-	int status = 0, n = 0;
-	enum DRXPowerMode powerMode = DRXK_POWER_DOWN_OFDM;
-	u16 driverVersion;
-
-	dprintk(1, "\n");
-	if ((state->m_DrxkState == DRXK_UNINITIALIZED)) {
-		drxk_i2c_lock(state);
-		status = PowerUpDevice(state);
-		if (status < 0)
-			goto error;
-		status = DRXX_Open(state);
-		if (status < 0)
-			goto error;
-		/* Soft reset of OFDM-, sys- and osc-clockdomain */
-		status = write16(state, SIO_CC_SOFT_RST__A, SIO_CC_SOFT_RST_OFDM__M | SIO_CC_SOFT_RST_SYS__M | SIO_CC_SOFT_RST_OSC__M);
-		if (status < 0)
-			goto error;
-		status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY);
-		if (status < 0)
-			goto error;
-		/* TODO is this needed, if yes how much delay in worst case scenario */
-		msleep(1);
-		state->m_DRXK_A3_PATCH_CODE = true;
-		status = GetDeviceCapabilities(state);
-		if (status < 0)
-			goto error;
-
-		/* Bridge delay, uses oscilator clock */
-		/* Delay = (delay (nano seconds) * oscclk (kHz))/ 1000 */
-		/* SDA brdige delay */
-		state->m_HICfgBridgeDelay =
-			(u16) ((state->m_oscClockFreq / 1000) *
-				HI_I2C_BRIDGE_DELAY) / 1000;
-		/* Clipping */
-		if (state->m_HICfgBridgeDelay >
-			SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M) {
-			state->m_HICfgBridgeDelay =
-				SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M;
-		}
-		/* SCL bridge delay, same as SDA for now */
-		state->m_HICfgBridgeDelay +=
-			state->m_HICfgBridgeDelay <<
-			SIO_HI_RA_RAM_PAR_3_CFG_DBL_SCL__B;
-
-		status = InitHI(state);
-		if (status < 0)
-			goto error;
-		/* disable various processes */
-#if NOA1ROM
-		if (!(state->m_DRXK_A1_ROM_CODE)
-			&& !(state->m_DRXK_A2_ROM_CODE))
-#endif
-		{
-			status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
-			if (status < 0)
-				goto error;
-		}
-
-		/* disable MPEG port */
-		status = MPEGTSDisable(state);
-		if (status < 0)
-			goto error;
-
-		/* Stop AUD and SCU */
-		status = write16(state, AUD_COMM_EXEC__A, AUD_COMM_EXEC_STOP);
-		if (status < 0)
-			goto error;
-		status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_STOP);
-		if (status < 0)
-			goto error;
-
-		/* enable token-ring bus through OFDM block for possible ucode upload */
-		status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, SIO_OFDM_SH_OFDM_RING_ENABLE_ON);
-		if (status < 0)
-			goto error;
-
-		/* include boot loader section */
-		status = write16(state, SIO_BL_COMM_EXEC__A, SIO_BL_COMM_EXEC_ACTIVE);
-		if (status < 0)
-			goto error;
-		status = BLChainCmd(state, 0, 6, 100);
-		if (status < 0)
-			goto error;
-
-		if (state->fw) {
-			status = DownloadMicrocode(state, state->fw->data,
-						   state->fw->size);
-			if (status < 0)
-				goto error;
-		}
-
-		/* disable token-ring bus through OFDM block for possible ucode upload */
-		status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, SIO_OFDM_SH_OFDM_RING_ENABLE_OFF);
-		if (status < 0)
-			goto error;
-
-		/* Run SCU for a little while to initialize microcode version numbers */
-		status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
-		if (status < 0)
-			goto error;
-		status = DRXX_Open(state);
-		if (status < 0)
-			goto error;
-		/* added for test */
-		msleep(30);
-
-		powerMode = DRXK_POWER_DOWN_OFDM;
-		status = CtrlPowerMode(state, &powerMode);
-		if (status < 0)
-			goto error;
-
-		/* Stamp driver version number in SCU data RAM in BCD code
-			Done to enable field application engineers to retreive drxdriver version
-			via I2C from SCU RAM.
-			Not using SCU command interface for SCU register access since no
-			microcode may be present.
-			*/
-		driverVersion =
-			(((DRXK_VERSION_MAJOR / 100) % 10) << 12) +
-			(((DRXK_VERSION_MAJOR / 10) % 10) << 8) +
-			((DRXK_VERSION_MAJOR % 10) << 4) +
-			(DRXK_VERSION_MINOR % 10);
-		status = write16(state, SCU_RAM_DRIVER_VER_HI__A, driverVersion);
-		if (status < 0)
-			goto error;
-		driverVersion =
-			(((DRXK_VERSION_PATCH / 1000) % 10) << 12) +
-			(((DRXK_VERSION_PATCH / 100) % 10) << 8) +
-			(((DRXK_VERSION_PATCH / 10) % 10) << 4) +
-			(DRXK_VERSION_PATCH % 10);
-		status = write16(state, SCU_RAM_DRIVER_VER_LO__A, driverVersion);
-		if (status < 0)
-			goto error;
-
-		printk(KERN_INFO "DRXK driver version %d.%d.%d\n",
-			DRXK_VERSION_MAJOR, DRXK_VERSION_MINOR,
-			DRXK_VERSION_PATCH);
-
-		/* Dirty fix of default values for ROM/PATCH microcode
-			Dirty because this fix makes it impossible to setup suitable values
-			before calling DRX_Open. This solution requires changes to RF AGC speed
-			to be done via the CTRL function after calling DRX_Open */
-
-		/* m_dvbtRfAgcCfg.speed = 3; */
-
-		/* Reset driver debug flags to 0 */
-		status = write16(state, SCU_RAM_DRIVER_DEBUG__A, 0);
-		if (status < 0)
-			goto error;
-		/* driver 0.9.0 */
-		/* Setup FEC OC:
-			NOTE: No more full FEC resets allowed afterwards!! */
-		status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_STOP);
-		if (status < 0)
-			goto error;
-		/* MPEGTS functions are still the same */
-		status = MPEGTSDtoInit(state);
-		if (status < 0)
-			goto error;
-		status = MPEGTSStop(state);
-		if (status < 0)
-			goto error;
-		status = MPEGTSConfigurePolarity(state);
-		if (status < 0)
-			goto error;
-		status = MPEGTSConfigurePins(state, state->m_enableMPEGOutput);
-		if (status < 0)
-			goto error;
-		/* added: configure GPIO */
-		status = WriteGPIO(state);
-		if (status < 0)
-			goto error;
-
-		state->m_DrxkState = DRXK_STOPPED;
-
-		if (state->m_bPowerDown) {
-			status = PowerDownDevice(state);
-			if (status < 0)
-				goto error;
-			state->m_DrxkState = DRXK_POWERED_DOWN;
-		} else
-			state->m_DrxkState = DRXK_STOPPED;
-
-		/* Initialize the supported delivery systems */
-		n = 0;
-		if (state->m_hasDVBC) {
-			state->frontend.ops.delsys[n++] = SYS_DVBC_ANNEX_A;
-			state->frontend.ops.delsys[n++] = SYS_DVBC_ANNEX_C;
-			strlcat(state->frontend.ops.info.name, " DVB-C",
-				sizeof(state->frontend.ops.info.name));
-		}
-		if (state->m_hasDVBT) {
-			state->frontend.ops.delsys[n++] = SYS_DVBT;
-			strlcat(state->frontend.ops.info.name, " DVB-T",
-				sizeof(state->frontend.ops.info.name));
-		}
-		drxk_i2c_unlock(state);
-	}
-error:
-	if (status < 0) {
-		state->m_DrxkState = DRXK_NO_DEV;
-		drxk_i2c_unlock(state);
-		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
-	}
-
-	return status;
-}
-
-static void load_firmware_cb(const struct firmware *fw,
-			     void *context)
-{
-	struct drxk_state *state = context;
-
-	dprintk(1, ": %s\n", fw ? "firmware loaded" : "firmware not loaded");
-	if (!fw) {
-		printk(KERN_ERR
-		       "drxk: Could not load firmware file %s.\n",
-			state->microcode_name);
-		printk(KERN_INFO
-		       "drxk: Copy %s to your hotplug directory!\n",
-			state->microcode_name);
-		state->microcode_name = NULL;
-
-		/*
-		 * As firmware is now load asynchronous, it is not possible
-		 * anymore to fail at frontend attach. We might silently
-		 * return here, and hope that the driver won't crash.
-		 * We might also change all DVB callbacks to return -ENODEV
-		 * if the device is not initialized.
-		 * As the DRX-K devices have their own internal firmware,
-		 * let's just hope that it will match a firmware revision
-		 * compatible with this driver and proceed.
-		 */
-	}
-	state->fw = fw;
-
-	init_drxk(state);
-}
-
-static void drxk_release(struct dvb_frontend *fe)
-{
-	struct drxk_state *state = fe->demodulator_priv;
-
-	dprintk(1, "\n");
-	if (state->fw)
-		release_firmware(state->fw);
-
-	kfree(state);
-}
-
-static int drxk_sleep(struct dvb_frontend *fe)
-{
-	struct drxk_state *state = fe->demodulator_priv;
-
-	dprintk(1, "\n");
-
-	if (state->m_DrxkState == DRXK_NO_DEV)
-		return -ENODEV;
-	if (state->m_DrxkState == DRXK_UNINITIALIZED)
-		return 0;
-
-	ShutDown(state);
-	return 0;
-}
-
-static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct drxk_state *state = fe->demodulator_priv;
-
-	dprintk(1, ": %s\n", enable ? "enable" : "disable");
-
-	if (state->m_DrxkState == DRXK_NO_DEV)
-		return -ENODEV;
-
-	return ConfigureI2CBridge(state, enable ? true : false);
-}
-
-static int drxk_set_parameters(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	u32 delsys  = p->delivery_system, old_delsys;
-	struct drxk_state *state = fe->demodulator_priv;
-	u32 IF;
-
-	dprintk(1, "\n");
-
-	if (state->m_DrxkState == DRXK_NO_DEV)
-		return -ENODEV;
-
-	if (state->m_DrxkState == DRXK_UNINITIALIZED)
-		return -EAGAIN;
-
-	if (!fe->ops.tuner_ops.get_if_frequency) {
-		printk(KERN_ERR
-		       "drxk: Error: get_if_frequency() not defined at tuner. Can't work without it!\n");
-		return -EINVAL;
-	}
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (fe->ops.tuner_ops.set_params)
-		fe->ops.tuner_ops.set_params(fe);
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-
-	old_delsys = state->props.delivery_system;
-	state->props = *p;
-
-	if (old_delsys != delsys) {
-		ShutDown(state);
-		switch (delsys) {
-		case SYS_DVBC_ANNEX_A:
-		case SYS_DVBC_ANNEX_C:
-			if (!state->m_hasDVBC)
-				return -EINVAL;
-			state->m_itut_annex_c = (delsys == SYS_DVBC_ANNEX_C) ? true : false;
-			if (state->m_itut_annex_c)
-				SetOperationMode(state, OM_QAM_ITU_C);
-			else
-				SetOperationMode(state, OM_QAM_ITU_A);
-			break;
-		case SYS_DVBT:
-			if (!state->m_hasDVBT)
-				return -EINVAL;
-			SetOperationMode(state, OM_DVBT);
-			break;
-		default:
-			return -EINVAL;
-		}
-	}
-
-	fe->ops.tuner_ops.get_if_frequency(fe, &IF);
-	Start(state, 0, IF);
-
-	/* printk(KERN_DEBUG "drxk: %s IF=%d done\n", __func__, IF); */
-
-	return 0;
-}
-
-static int drxk_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct drxk_state *state = fe->demodulator_priv;
-	u32 stat;
-
-	dprintk(1, "\n");
-
-	if (state->m_DrxkState == DRXK_NO_DEV)
-		return -ENODEV;
-	if (state->m_DrxkState == DRXK_UNINITIALIZED)
-		return -EAGAIN;
-
-	*status = 0;
-	GetLockStatus(state, &stat, 0);
-	if (stat == MPEG_LOCK)
-		*status |= 0x1f;
-	if (stat == FEC_LOCK)
-		*status |= 0x0f;
-	if (stat == DEMOD_LOCK)
-		*status |= 0x07;
-	return 0;
-}
-
-static int drxk_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct drxk_state *state = fe->demodulator_priv;
-
-	dprintk(1, "\n");
-
-	if (state->m_DrxkState == DRXK_NO_DEV)
-		return -ENODEV;
-	if (state->m_DrxkState == DRXK_UNINITIALIZED)
-		return -EAGAIN;
-
-	*ber = 0;
-	return 0;
-}
-
-static int drxk_read_signal_strength(struct dvb_frontend *fe,
-				     u16 *strength)
-{
-	struct drxk_state *state = fe->demodulator_priv;
-	u32 val = 0;
-
-	dprintk(1, "\n");
-
-	if (state->m_DrxkState == DRXK_NO_DEV)
-		return -ENODEV;
-	if (state->m_DrxkState == DRXK_UNINITIALIZED)
-		return -EAGAIN;
-
-	ReadIFAgc(state, &val);
-	*strength = val & 0xffff;
-	return 0;
-}
-
-static int drxk_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct drxk_state *state = fe->demodulator_priv;
-	s32 snr2;
-
-	dprintk(1, "\n");
-
-	if (state->m_DrxkState == DRXK_NO_DEV)
-		return -ENODEV;
-	if (state->m_DrxkState == DRXK_UNINITIALIZED)
-		return -EAGAIN;
-
-	GetSignalToNoise(state, &snr2);
-	*snr = snr2 & 0xffff;
-	return 0;
-}
-
-static int drxk_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	struct drxk_state *state = fe->demodulator_priv;
-	u16 err;
-
-	dprintk(1, "\n");
-
-	if (state->m_DrxkState == DRXK_NO_DEV)
-		return -ENODEV;
-	if (state->m_DrxkState == DRXK_UNINITIALIZED)
-		return -EAGAIN;
-
-	DVBTQAMGetAccPktErr(state, &err);
-	*ucblocks = (u32) err;
-	return 0;
-}
-
-static int drxk_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings
-				    *sets)
-{
-	struct drxk_state *state = fe->demodulator_priv;
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-
-	dprintk(1, "\n");
-
-	if (state->m_DrxkState == DRXK_NO_DEV)
-		return -ENODEV;
-	if (state->m_DrxkState == DRXK_UNINITIALIZED)
-		return -EAGAIN;
-
-	switch (p->delivery_system) {
-	case SYS_DVBC_ANNEX_A:
-	case SYS_DVBC_ANNEX_C:
-	case SYS_DVBT:
-		sets->min_delay_ms = 3000;
-		sets->max_drift = 0;
-		sets->step_size = 0;
-		return 0;
-	default:
-		return -EINVAL;
-	}
-}
-
-static struct dvb_frontend_ops drxk_ops = {
-	/* .delsys will be filled dynamically */
-	.info = {
-		.name = "DRXK",
-		.frequency_min = 47000000,
-		.frequency_max = 865000000,
-		 /* For DVB-C */
-		.symbol_rate_min = 870000,
-		.symbol_rate_max = 11700000,
-		/* For DVB-T */
-		.frequency_stepsize = 166667,
-
-		.caps = FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 |
-			FE_CAN_QAM_128 | FE_CAN_QAM_256 | FE_CAN_FEC_AUTO |
-			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_MUTE_TS |
-			FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER |
-			FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO
-	},
-
-	.release = drxk_release,
-	.sleep = drxk_sleep,
-	.i2c_gate_ctrl = drxk_gate_ctrl,
-
-	.set_frontend = drxk_set_parameters,
-	.get_tune_settings = drxk_get_tune_settings,
-
-	.read_status = drxk_read_status,
-	.read_ber = drxk_read_ber,
-	.read_signal_strength = drxk_read_signal_strength,
-	.read_snr = drxk_read_snr,
-	.read_ucblocks = drxk_read_ucblocks,
-};
-
-struct dvb_frontend *drxk_attach(const struct drxk_config *config,
-				 struct i2c_adapter *i2c)
-{
-	struct drxk_state *state = NULL;
-	u8 adr = config->adr;
-	int status;
-
-	dprintk(1, "\n");
-	state = kzalloc(sizeof(struct drxk_state), GFP_KERNEL);
-	if (!state)
-		return NULL;
-
-	state->i2c = i2c;
-	state->demod_address = adr;
-	state->single_master = config->single_master;
-	state->microcode_name = config->microcode_name;
-	state->qam_demod_parameter_count = config->qam_demod_parameter_count;
-	state->no_i2c_bridge = config->no_i2c_bridge;
-	state->antenna_gpio = config->antenna_gpio;
-	state->antenna_dvbt = config->antenna_dvbt;
-	state->m_ChunkSize = config->chunk_size;
-	state->enable_merr_cfg = config->enable_merr_cfg;
-
-	if (config->dynamic_clk) {
-		state->m_DVBTStaticCLK = 0;
-		state->m_DVBCStaticCLK = 0;
-	} else {
-		state->m_DVBTStaticCLK = 1;
-		state->m_DVBCStaticCLK = 1;
-	}
-
-
-	if (config->mpeg_out_clk_strength)
-		state->m_TSClockkStrength = config->mpeg_out_clk_strength & 0x07;
-	else
-		state->m_TSClockkStrength = 0x06;
-
-	if (config->parallel_ts)
-		state->m_enableParallel = true;
-	else
-		state->m_enableParallel = false;
-
-	/* NOTE: as more UIO bits will be used, add them to the mask */
-	state->UIO_mask = config->antenna_gpio;
-
-	/* Default gpio to DVB-C */
-	if (!state->antenna_dvbt && state->antenna_gpio)
-		state->m_GPIO |= state->antenna_gpio;
-	else
-		state->m_GPIO &= ~state->antenna_gpio;
-
-	mutex_init(&state->mutex);
-
-	memcpy(&state->frontend.ops, &drxk_ops, sizeof(drxk_ops));
-	state->frontend.demodulator_priv = state;
-
-	init_state(state);
-
-	/* Load firmware and initialize DRX-K */
-	if (state->microcode_name) {
-		status = request_firmware_nowait(THIS_MODULE, 1,
-					      state->microcode_name,
-					      state->i2c->dev.parent,
-					      GFP_KERNEL,
-					      state, load_firmware_cb);
-		if (status < 0) {
-			printk(KERN_ERR
-			"drxk: failed to request a firmware\n");
-			return NULL;
-		}
-	} else if (init_drxk(state) < 0)
-		goto error;
-
-	printk(KERN_INFO "drxk: frontend initialized.\n");
-	return &state->frontend;
-
-error:
-	printk(KERN_ERR "drxk: not found\n");
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(drxk_attach);
-
-MODULE_DESCRIPTION("DRX-K driver");
-MODULE_AUTHOR("Ralph Metzler");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/drxk_hard.h b/drivers/media/dvb/frontends/drxk_hard.h
deleted file mode 100644
index 6bb9fc4..0000000
--- a/drivers/media/dvb/frontends/drxk_hard.h
+++ /dev/null
@@ -1,364 +0,0 @@
-#include "drxk_map.h"
-
-#define DRXK_VERSION_MAJOR 0
-#define DRXK_VERSION_MINOR 9
-#define DRXK_VERSION_PATCH 4300
-
-#define HI_I2C_DELAY        42
-#define HI_I2C_BRIDGE_DELAY 350
-#define DRXK_MAX_RETRIES    100
-
-#define DRIVER_4400 1
-
-#define DRXX_JTAGID   0x039210D9
-#define DRXX_J_JTAGID 0x239310D9
-#define DRXX_K_JTAGID 0x039210D9
-
-#define DRX_UNKNOWN     254
-#define DRX_AUTO        255
-
-#define DRX_SCU_READY   0
-#define DRXK_MAX_WAITTIME (200)
-#define SCU_RESULT_OK      0
-#define SCU_RESULT_SIZE   -4
-#define SCU_RESULT_INVPAR -3
-#define SCU_RESULT_UNKSTD -2
-#define SCU_RESULT_UNKCMD -1
-
-#ifndef DRXK_OFDM_TR_SHUTDOWN_TIMEOUT
-#define DRXK_OFDM_TR_SHUTDOWN_TIMEOUT (200)
-#endif
-
-#define DRXK_8VSB_MPEG_BIT_RATE     19392658UL  /*bps*/
-#define DRXK_DVBT_MPEG_BIT_RATE     32000000UL  /*bps*/
-#define DRXK_QAM16_MPEG_BIT_RATE    27000000UL  /*bps*/
-#define DRXK_QAM32_MPEG_BIT_RATE    33000000UL  /*bps*/
-#define DRXK_QAM64_MPEG_BIT_RATE    40000000UL  /*bps*/
-#define DRXK_QAM128_MPEG_BIT_RATE   46000000UL  /*bps*/
-#define DRXK_QAM256_MPEG_BIT_RATE   52000000UL  /*bps*/
-#define DRXK_MAX_MPEG_BIT_RATE      52000000UL  /*bps*/
-
-#define   IQM_CF_OUT_ENA_OFDM__M                                            0x4
-#define     IQM_FS_ADJ_SEL_B_QAM                                            0x1
-#define     IQM_FS_ADJ_SEL_B_OFF                                            0x0
-#define     IQM_FS_ADJ_SEL_B_VSB                                            0x2
-#define     IQM_RC_ADJ_SEL_B_OFF                                            0x0
-#define     IQM_RC_ADJ_SEL_B_QAM                                            0x1
-#define     IQM_RC_ADJ_SEL_B_VSB                                            0x2
-
-enum OperationMode {
-	OM_NONE,
-	OM_QAM_ITU_A,
-	OM_QAM_ITU_B,
-	OM_QAM_ITU_C,
-	OM_DVBT
-};
-
-enum DRXPowerMode {
-	DRX_POWER_UP = 0,
-	DRX_POWER_MODE_1,
-	DRX_POWER_MODE_2,
-	DRX_POWER_MODE_3,
-	DRX_POWER_MODE_4,
-	DRX_POWER_MODE_5,
-	DRX_POWER_MODE_6,
-	DRX_POWER_MODE_7,
-	DRX_POWER_MODE_8,
-
-	DRX_POWER_MODE_9,
-	DRX_POWER_MODE_10,
-	DRX_POWER_MODE_11,
-	DRX_POWER_MODE_12,
-	DRX_POWER_MODE_13,
-	DRX_POWER_MODE_14,
-	DRX_POWER_MODE_15,
-	DRX_POWER_MODE_16,
-	DRX_POWER_DOWN = 255
-};
-
-
-/** /brief Intermediate power mode for DRXK, power down OFDM clock domain */
-#ifndef DRXK_POWER_DOWN_OFDM
-#define DRXK_POWER_DOWN_OFDM        DRX_POWER_MODE_1
-#endif
-
-/** /brief Intermediate power mode for DRXK, power down core (sysclk) */
-#ifndef DRXK_POWER_DOWN_CORE
-#define DRXK_POWER_DOWN_CORE        DRX_POWER_MODE_9
-#endif
-
-/** /brief Intermediate power mode for DRXK, power down pll (only osc runs) */
-#ifndef DRXK_POWER_DOWN_PLL
-#define DRXK_POWER_DOWN_PLL         DRX_POWER_MODE_10
-#endif
-
-
-enum AGC_CTRL_MODE { DRXK_AGC_CTRL_AUTO = 0, DRXK_AGC_CTRL_USER, DRXK_AGC_CTRL_OFF };
-enum EDrxkState {
-	DRXK_UNINITIALIZED = 0,
-	DRXK_STOPPED,
-	DRXK_DTV_STARTED,
-	DRXK_ATV_STARTED,
-	DRXK_POWERED_DOWN,
-	DRXK_NO_DEV			/* If drxk init failed */
-};
-
-enum EDrxkCoefArrayIndex {
-	DRXK_COEF_IDX_MN = 0,
-	DRXK_COEF_IDX_FM    ,
-	DRXK_COEF_IDX_L     ,
-	DRXK_COEF_IDX_LP    ,
-	DRXK_COEF_IDX_BG    ,
-	DRXK_COEF_IDX_DK    ,
-	DRXK_COEF_IDX_I     ,
-	DRXK_COEF_IDX_MAX
-};
-enum EDrxkSifAttenuation {
-	DRXK_SIF_ATTENUATION_0DB,
-	DRXK_SIF_ATTENUATION_3DB,
-	DRXK_SIF_ATTENUATION_6DB,
-	DRXK_SIF_ATTENUATION_9DB
-};
-enum EDrxkConstellation {
-	DRX_CONSTELLATION_BPSK = 0,
-	DRX_CONSTELLATION_QPSK,
-	DRX_CONSTELLATION_PSK8,
-	DRX_CONSTELLATION_QAM16,
-	DRX_CONSTELLATION_QAM32,
-	DRX_CONSTELLATION_QAM64,
-	DRX_CONSTELLATION_QAM128,
-	DRX_CONSTELLATION_QAM256,
-	DRX_CONSTELLATION_QAM512,
-	DRX_CONSTELLATION_QAM1024,
-	DRX_CONSTELLATION_UNKNOWN = DRX_UNKNOWN,
-	DRX_CONSTELLATION_AUTO    = DRX_AUTO
-};
-enum EDrxkInterleaveMode {
-	DRXK_QAM_I12_J17    = 16,
-	DRXK_QAM_I_UNKNOWN  = DRX_UNKNOWN
-};
-enum {
-	DRXK_SPIN_A1 = 0,
-	DRXK_SPIN_A2,
-	DRXK_SPIN_A3,
-	DRXK_SPIN_UNKNOWN
-};
-
-enum DRXKCfgDvbtSqiSpeed {
-	DRXK_DVBT_SQI_SPEED_FAST = 0,
-	DRXK_DVBT_SQI_SPEED_MEDIUM,
-	DRXK_DVBT_SQI_SPEED_SLOW,
-	DRXK_DVBT_SQI_SPEED_UNKNOWN = DRX_UNKNOWN
-} ;
-
-enum DRXFftmode_t {
-	DRX_FFTMODE_2K = 0,
-	DRX_FFTMODE_4K,
-	DRX_FFTMODE_8K,
-	DRX_FFTMODE_UNKNOWN = DRX_UNKNOWN,
-	DRX_FFTMODE_AUTO    = DRX_AUTO
-};
-
-enum DRXMPEGStrWidth_t {
-	DRX_MPEG_STR_WIDTH_1,
-	DRX_MPEG_STR_WIDTH_8
-};
-
-enum DRXQamLockRange_t {
-	DRX_QAM_LOCKRANGE_NORMAL,
-	DRX_QAM_LOCKRANGE_EXTENDED
-};
-
-struct DRXKCfgDvbtEchoThres_t {
-	u16             threshold;
-	enum DRXFftmode_t      fftMode;
-} ;
-
-struct SCfgAgc {
-	enum AGC_CTRL_MODE     ctrlMode;        /* off, user, auto */
-	u16            outputLevel;     /* range dependent on AGC */
-	u16            minOutputLevel;  /* range dependent on AGC */
-	u16            maxOutputLevel;  /* range dependent on AGC */
-	u16            speed;           /* range dependent on AGC */
-	u16            top;             /* rf-agc take over point */
-	u16            cutOffCurrent;   /* rf-agc is accelerated if output current
-					   is below cut-off current */
-	u16            IngainTgtMax;
-	u16            FastClipCtrlDelay;
-};
-
-struct SCfgPreSaw {
-	u16        reference; /* pre SAW reference value, range 0 .. 31 */
-	bool          usePreSaw; /* TRUE algorithms must use pre SAW sense */
-};
-
-struct DRXKOfdmScCmd_t {
-	u16 cmd;        /**< Command number */
-	u16 subcmd;     /**< Sub-command parameter*/
-	u16 param0;     /**< General purpous param */
-	u16 param1;     /**< General purpous param */
-	u16 param2;     /**< General purpous param */
-	u16 param3;     /**< General purpous param */
-	u16 param4;     /**< General purpous param */
-};
-
-struct drxk_state {
-	struct dvb_frontend frontend;
-	struct dtv_frontend_properties props;
-	struct device *dev;
-
-	struct i2c_adapter *i2c;
-	u8     demod_address;
-	void  *priv;
-
-	struct mutex mutex;
-
-	u32    m_Instance;           /**< Channel 1,2,3 or 4 */
-
-	int    m_ChunkSize;
-	u8 Chunk[256];
-
-	bool   m_hasLNA;
-	bool   m_hasDVBT;
-	bool   m_hasDVBC;
-	bool   m_hasAudio;
-	bool   m_hasATV;
-	bool   m_hasOOB;
-	bool   m_hasSAWSW;         /**< TRUE if mat_tx is available */
-	bool   m_hasGPIO1;         /**< TRUE if mat_rx is available */
-	bool   m_hasGPIO2;         /**< TRUE if GPIO is available */
-	bool   m_hasIRQN;          /**< TRUE if IRQN is available */
-	u16    m_oscClockFreq;
-	u16    m_HICfgTimingDiv;
-	u16    m_HICfgBridgeDelay;
-	u16    m_HICfgWakeUpKey;
-	u16    m_HICfgTimeout;
-	u16    m_HICfgCtrl;
-	s32    m_sysClockFreq;      /**< system clock frequency in kHz */
-
-	enum EDrxkState    m_DrxkState;      /**< State of Drxk (init,stopped,started) */
-	enum OperationMode m_OperationMode;  /**< digital standards */
-	struct SCfgAgc     m_vsbRfAgcCfg;    /**< settings for VSB RF-AGC */
-	struct SCfgAgc     m_vsbIfAgcCfg;    /**< settings for VSB IF-AGC */
-	u16                m_vsbPgaCfg;      /**< settings for VSB PGA */
-	struct SCfgPreSaw  m_vsbPreSawCfg;   /**< settings for pre SAW sense */
-	s32    m_Quality83percent;  /**< MER level (*0.1 dB) for 83% quality indication */
-	s32    m_Quality93percent;  /**< MER level (*0.1 dB) for 93% quality indication */
-	bool   m_smartAntInverted;
-	bool   m_bDebugEnableBridge;
-	bool   m_bPDownOpenBridge;  /**< only open DRXK bridge before power-down once it has been accessed */
-	bool   m_bPowerDown;        /**< Power down when not used */
-
-	u32    m_IqmFsRateOfs;      /**< frequency shift as written to DRXK register (28bit fixpoint) */
-
-	bool   m_enableMPEGOutput;  /**< If TRUE, enable MPEG output */
-	bool   m_insertRSByte;      /**< If TRUE, insert RS byte */
-	bool   m_enableParallel;    /**< If TRUE, parallel out otherwise serial */
-	bool   m_invertDATA;        /**< If TRUE, invert DATA signals */
-	bool   m_invertERR;         /**< If TRUE, invert ERR signal */
-	bool   m_invertSTR;         /**< If TRUE, invert STR signals */
-	bool   m_invertVAL;         /**< If TRUE, invert VAL signals */
-	bool   m_invertCLK;         /**< If TRUE, invert CLK signals */
-	bool   m_DVBCStaticCLK;
-	bool   m_DVBTStaticCLK;     /**< If TRUE, static MPEG clockrate will
-					 be used, otherwise clockrate will
-					 adapt to the bitrate of the TS */
-	u32    m_DVBTBitrate;
-	u32    m_DVBCBitrate;
-
-	u8     m_TSDataStrength;
-	u8     m_TSClockkStrength;
-
-	bool   m_itut_annex_c;      /* If true, uses ITU-T DVB-C Annex C, instead of Annex A */
-
-	enum DRXMPEGStrWidth_t  m_widthSTR;    /**< MPEG start width */
-	u32    m_mpegTsStaticBitrate;          /**< Maximum bitrate in b/s in case
-						    static clockrate is selected */
-
-	/* LARGE_INTEGER   m_StartTime; */     /**< Contains the time of the last demod start */
-	s32    m_MpegLockTimeOut;      /**< WaitForLockStatus Timeout (counts from start time) */
-	s32    m_DemodLockTimeOut;     /**< WaitForLockStatus Timeout (counts from start time) */
-
-	bool   m_disableTEIhandling;
-
-	bool   m_RfAgcPol;
-	bool   m_IfAgcPol;
-
-	struct SCfgAgc    m_atvRfAgcCfg;  /**< settings for ATV RF-AGC */
-	struct SCfgAgc    m_atvIfAgcCfg;  /**< settings for ATV IF-AGC */
-	struct SCfgPreSaw m_atvPreSawCfg; /**< settings for ATV pre SAW sense */
-	bool              m_phaseCorrectionBypass;
-	s16               m_atvTopVidPeak;
-	u16               m_atvTopNoiseTh;
-	enum EDrxkSifAttenuation m_sifAttenuation;
-	bool              m_enableCVBSOutput;
-	bool              m_enableSIFOutput;
-	bool              m_bMirrorFreqSpect;
-	enum EDrxkConstellation  m_Constellation; /**< Constellation type of the channel */
-	u32               m_CurrSymbolRate;       /**< Current QAM symbol rate */
-	struct SCfgAgc    m_qamRfAgcCfg;          /**< settings for QAM RF-AGC */
-	struct SCfgAgc    m_qamIfAgcCfg;          /**< settings for QAM IF-AGC */
-	u16               m_qamPgaCfg;            /**< settings for QAM PGA */
-	struct SCfgPreSaw m_qamPreSawCfg;         /**< settings for QAM pre SAW sense */
-	enum EDrxkInterleaveMode m_qamInterleaveMode; /**< QAM Interleave mode */
-	u16               m_fecRsPlen;
-	u16               m_fecRsPrescale;
-
-	enum DRXKCfgDvbtSqiSpeed m_sqiSpeed;
-
-	u16               m_GPIO;
-	u16               m_GPIOCfg;
-
-	struct SCfgAgc    m_dvbtRfAgcCfg;     /**< settings for QAM RF-AGC */
-	struct SCfgAgc    m_dvbtIfAgcCfg;     /**< settings for QAM IF-AGC */
-	struct SCfgPreSaw m_dvbtPreSawCfg;    /**< settings for QAM pre SAW sense */
-
-	u16               m_agcFastClipCtrlDelay;
-	bool              m_adcCompPassed;
-	u16               m_adcCompCoef[64];
-	u16               m_adcState;
-
-	u8               *m_microcode;
-	int               m_microcode_length;
-	bool              m_DRXK_A1_PATCH_CODE;
-	bool              m_DRXK_A1_ROM_CODE;
-	bool              m_DRXK_A2_ROM_CODE;
-	bool              m_DRXK_A3_ROM_CODE;
-	bool              m_DRXK_A2_PATCH_CODE;
-	bool              m_DRXK_A3_PATCH_CODE;
-
-	bool              m_rfmirror;
-	u8                m_deviceSpin;
-	u32               m_iqmRcRate;
-
-	enum DRXPowerMode m_currentPowerMode;
-
-	/* when true, avoids other devices to use the I2C bus */
-	bool		  drxk_i2c_exclusive_lock;
-
-	/*
-	 * Configurable parameters at the driver. They stores the values found
-	 * at struct drxk_config.
-	 */
-
-	u16	UIO_mask;	/* Bits used by UIO */
-
-	bool	enable_merr_cfg;
-	bool	single_master;
-	bool	no_i2c_bridge;
-	bool	antenna_dvbt;
-	u16	antenna_gpio;
-
-	/* Firmware */
-	const char *microcode_name;
-	struct completion fw_wait_load;
-	const struct firmware *fw;
-	int qam_demod_parameter_count;
-};
-
-#define NEVER_LOCK 0
-#define NOT_LOCKED 1
-#define DEMOD_LOCK 2
-#define FEC_LOCK   3
-#define MPEG_LOCK  4
-
diff --git a/drivers/media/dvb/frontends/drxk_map.h b/drivers/media/dvb/frontends/drxk_map.h
deleted file mode 100644
index 23e16c1..0000000
--- a/drivers/media/dvb/frontends/drxk_map.h
+++ /dev/null
@@ -1,451 +0,0 @@
-#define  AUD_COMM_EXEC__A                                                  0x1000000
-#define    AUD_COMM_EXEC_STOP                                              0x0
-#define  FEC_COMM_EXEC__A                                                  0x1C00000
-#define    FEC_COMM_EXEC_STOP                                              0x0
-#define    FEC_COMM_EXEC_ACTIVE                                            0x1
-#define  FEC_DI_COMM_EXEC__A                                               0x1C20000
-#define    FEC_DI_COMM_EXEC_STOP                                           0x0
-#define  FEC_DI_INPUT_CTL__A                                               0x1C20016
-#define  FEC_RS_COMM_EXEC__A                                               0x1C30000
-#define    FEC_RS_COMM_EXEC_STOP                                           0x0
-#define  FEC_RS_MEASUREMENT_PERIOD__A                                      0x1C30012
-#define  FEC_RS_MEASUREMENT_PRESCALE__A                                    0x1C30013
-#define  FEC_OC_MODE__A                                                    0x1C40011
-#define    FEC_OC_MODE_PARITY__M                                           0x1
-#define  FEC_OC_DTO_MODE__A                                                0x1C40014
-#define    FEC_OC_DTO_MODE_DYNAMIC__M                                      0x1
-#define    FEC_OC_DTO_MODE_OFFSET_ENABLE__M                                0x4
-#define  FEC_OC_DTO_PERIOD__A                                              0x1C40015
-#define  FEC_OC_DTO_BURST_LEN__A                                           0x1C40018
-#define  FEC_OC_FCT_MODE__A                                                0x1C4001A
-#define  FEC_OC_FCT_MODE__PRE                                              0x0
-#define    FEC_OC_FCT_MODE_RAT_ENA__M                                      0x1
-#define    FEC_OC_FCT_MODE_VIRT_ENA__M                                     0x2
-#define  FEC_OC_TMD_MODE__A                                                0x1C4001E
-#define  FEC_OC_TMD_COUNT__A                                               0x1C4001F
-#define  FEC_OC_TMD_HI_MARGIN__A                                           0x1C40020
-#define  FEC_OC_TMD_LO_MARGIN__A                                           0x1C40021
-#define  FEC_OC_TMD_INT_UPD_RATE__A                                        0x1C40023
-#define  FEC_OC_AVR_PARM_A__A                                              0x1C40026
-#define  FEC_OC_AVR_PARM_B__A                                              0x1C40027
-#define  FEC_OC_RCN_GAIN__A                                                0x1C4002E
-#define  FEC_OC_RCN_CTL_RATE_LO__A                                         0x1C40030
-#define  FEC_OC_RCN_CTL_STEP_LO__A                                         0x1C40032
-#define  FEC_OC_RCN_CTL_STEP_HI__A                                         0x1C40033
-#define  FEC_OC_SNC_MODE__A                                                0x1C40040
-#define    FEC_OC_SNC_MODE_SHUTDOWN__M                                     0x10
-#define  FEC_OC_SNC_LWM__A                                                 0x1C40041
-#define  FEC_OC_SNC_HWM__A                                                 0x1C40042
-#define  FEC_OC_SNC_UNLOCK__A                                              0x1C40043
-#define  FEC_OC_SNC_FAIL_PERIOD__A                                         0x1C40046
-#define  FEC_OC_IPR_MODE__A                                                0x1C40048
-#define    FEC_OC_IPR_MODE_SERIAL__M                                       0x1
-#define    FEC_OC_IPR_MODE_MCLK_DIS_DAT_ABS__M                             0x4
-#define    FEC_OC_IPR_MODE_MVAL_DIS_PAR__M                                 0x10
-#define  FEC_OC_IPR_INVERT__A                                              0x1C40049
-#define    FEC_OC_IPR_INVERT_MD0__M                                        0x1
-#define    FEC_OC_IPR_INVERT_MD1__M                                        0x2
-#define    FEC_OC_IPR_INVERT_MD2__M                                        0x4
-#define    FEC_OC_IPR_INVERT_MD3__M                                        0x8
-#define    FEC_OC_IPR_INVERT_MD4__M                                        0x10
-#define    FEC_OC_IPR_INVERT_MD5__M                                        0x20
-#define    FEC_OC_IPR_INVERT_MD6__M                                        0x40
-#define    FEC_OC_IPR_INVERT_MD7__M                                        0x80
-#define    FEC_OC_IPR_INVERT_MERR__M                                       0x100
-#define    FEC_OC_IPR_INVERT_MSTRT__M                                      0x200
-#define    FEC_OC_IPR_INVERT_MVAL__M                                       0x400
-#define    FEC_OC_IPR_INVERT_MCLK__M                                       0x800
-#define  FEC_OC_OCR_INVERT__A                                              0x1C40052
-#define  IQM_COMM_EXEC__A                                                  0x1800000
-#define      IQM_COMM_EXEC_B_STOP                                          0x0
-#define      IQM_COMM_EXEC_B_ACTIVE                                        0x1
-#define  IQM_FS_RATE_OFS_LO__A                                             0x1820010
-#define  IQM_FS_ADJ_SEL__A                                                 0x1820014
-#define      IQM_FS_ADJ_SEL_B_OFF                                          0x0
-#define      IQM_FS_ADJ_SEL_B_QAM                                          0x1
-#define      IQM_FS_ADJ_SEL_B_VSB                                          0x2
-#define  IQM_FD_RATESEL__A                                                 0x1830010
-#define  IQM_RC_RATE_OFS_LO__A                                             0x1840010
-#define  IQM_RC_RATE_OFS_LO__W                                             16
-#define  IQM_RC_RATE_OFS_LO__M                                             0xFFFF
-#define  IQM_RC_RATE_OFS_HI__M                                             0xFF
-#define  IQM_RC_ADJ_SEL__A                                                 0x1840014
-#define      IQM_RC_ADJ_SEL_B_OFF                                          0x0
-#define      IQM_RC_ADJ_SEL_B_QAM                                          0x1
-#define      IQM_RC_ADJ_SEL_B_VSB                                          0x2
-#define  IQM_RC_STRETCH__A                                                 0x1840016
-#define  IQM_CF_COMM_INT_MSK__A                                            0x1860006
-#define  IQM_CF_SYMMETRIC__A                                               0x1860010
-#define  IQM_CF_MIDTAP__A                                                  0x1860011
-#define    IQM_CF_MIDTAP_RE__B                                             0
-#define    IQM_CF_MIDTAP_IM__B                                             1
-#define  IQM_CF_OUT_ENA__A                                                 0x1860012
-#define    IQM_CF_OUT_ENA_QAM__B                                           1
-#define    IQM_CF_OUT_ENA_OFDM__M                                          0x4
-#define  IQM_CF_ADJ_SEL__A                                                 0x1860013
-#define  IQM_CF_SCALE__A                                                   0x1860014
-#define  IQM_CF_SCALE_SH__A                                                0x1860015
-#define  IQM_CF_SCALE_SH__PRE                                              0x0
-#define  IQM_CF_POW_MEAS_LEN__A                                            0x1860017
-#define  IQM_CF_DS_ENA__A                                                  0x1860019
-#define  IQM_CF_TAP_RE0__A                                                 0x1860020
-#define  IQM_CF_TAP_IM0__A                                                 0x1860040
-#define  IQM_CF_CLP_VAL__A                                                 0x1860060
-#define  IQM_CF_DATATH__A                                                  0x1860061
-#define  IQM_CF_PKDTH__A                                                   0x1860062
-#define  IQM_CF_WND_LEN__A                                                 0x1860063
-#define  IQM_CF_DET_LCT__A                                                 0x1860064
-#define  IQM_CF_BYPASSDET__A                                               0x1860067
-#define  IQM_AF_COMM_EXEC__A                                               0x1870000
-#define    IQM_AF_COMM_EXEC_ACTIVE                                         0x1
-#define  IQM_AF_CLKNEG__A                                                  0x1870012
-#define    IQM_AF_CLKNEG_CLKNEGDATA__M                                     0x2
-#define      IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS                     0x0
-#define      IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_NEG                     0x2
-#define  IQM_AF_START_LOCK__A                                              0x187001B
-#define  IQM_AF_PHASE0__A                                                  0x187001C
-#define  IQM_AF_PHASE1__A                                                  0x187001D
-#define  IQM_AF_PHASE2__A                                                  0x187001E
-#define  IQM_AF_CLP_LEN__A                                                 0x1870023
-#define  IQM_AF_CLP_TH__A                                                  0x1870024
-#define  IQM_AF_SNS_LEN__A                                                 0x1870026
-#define  IQM_AF_AGC_IF__A                                                  0x1870028
-#define  IQM_AF_AGC_RF__A                                                  0x1870029
-#define  IQM_AF_PDREF__A                                                   0x187002B
-#define  IQM_AF_PDREF__M                                                   0x1F
-#define  IQM_AF_STDBY__A                                                   0x187002C
-#define      IQM_AF_STDBY_STDBY_ADC_STANDBY                                0x2
-#define      IQM_AF_STDBY_STDBY_AMP_STANDBY                                0x4
-#define      IQM_AF_STDBY_STDBY_PD_STANDBY                                 0x8
-#define      IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY                            0x10
-#define      IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY                            0x20
-#define  IQM_AF_AMUX__A                                                    0x187002D
-#define    IQM_AF_AMUX_SIGNAL2ADC                                          0x1
-#define  IQM_AF_UPD_SEL__A                                                 0x187002F
-#define  IQM_AF_INC_LCT__A                                                 0x1870034
-#define  IQM_AF_INC_BYPASS__A                                              0x1870036
-#define  OFDM_CP_COMM_EXEC__A                                              0x2800000
-#define    OFDM_CP_COMM_EXEC_STOP                                          0x0
-#define  OFDM_EC_SB_PRIOR__A                                               0x3410013
-#define    OFDM_EC_SB_PRIOR_HI                                             0x0
-#define    OFDM_EC_SB_PRIOR_LO                                             0x1
-#define  OFDM_EQ_TOP_TD_TPS_CONST__A                                       0x3010054
-#define  OFDM_EQ_TOP_TD_TPS_CONST__M                                       0x3
-#define    OFDM_EQ_TOP_TD_TPS_CONST_64QAM                                  0x2
-#define  OFDM_EQ_TOP_TD_TPS_CODE_HP__A                                     0x3010056
-#define  OFDM_EQ_TOP_TD_TPS_CODE_HP__M                                     0x7
-#define    OFDM_EQ_TOP_TD_TPS_CODE_LP_7_8                                  0x4
-#define  OFDM_EQ_TOP_TD_SQR_ERR_I__A                                       0x301005E
-#define  OFDM_EQ_TOP_TD_SQR_ERR_Q__A                                       0x301005F
-#define  OFDM_EQ_TOP_TD_SQR_ERR_EXP__A                                     0x3010060
-#define  OFDM_EQ_TOP_TD_REQ_SMB_CNT__A                                     0x3010061
-#define  OFDM_EQ_TOP_TD_TPS_PWR_OFS__A                                     0x3010062
-#define  OFDM_LC_COMM_EXEC__A                                              0x3800000
-#define    OFDM_LC_COMM_EXEC_STOP                                          0x0
-#define  OFDM_SC_COMM_EXEC__A                                              0x3C00000
-#define    OFDM_SC_COMM_EXEC_STOP                                          0x0
-#define  OFDM_SC_COMM_STATE__A                                             0x3C00001
-#define  OFDM_SC_RA_RAM_PARAM0__A                                          0x3C20040
-#define  OFDM_SC_RA_RAM_PARAM1__A                                          0x3C20041
-#define  OFDM_SC_RA_RAM_CMD_ADDR__A                                        0x3C20042
-#define  OFDM_SC_RA_RAM_CMD__A                                             0x3C20043
-#define    OFDM_SC_RA_RAM_CMD_NULL                                         0x0
-#define    OFDM_SC_RA_RAM_CMD_PROC_START                                   0x1
-#define    OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM                               0x3
-#define    OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM                                0x4
-#define    OFDM_SC_RA_RAM_CMD_GET_OP_PARAM                                 0x5
-#define    OFDM_SC_RA_RAM_CMD_USER_IO                                      0x6
-#define    OFDM_SC_RA_RAM_CMD_SET_TIMER                                    0x7
-#define    OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING                              0x8
-#define    OFDM_SC_RA_RAM_SW_EVENT_RUN_NMASK__M                            0x1
-#define    OFDM_SC_RA_RAM_LOCKTRACK_MIN                                    0x1
-#define  OFDM_SC_RA_RAM_OP_PARAM__A                                        0x3C20048
-#define    OFDM_SC_RA_RAM_OP_PARAM_MODE__M                                 0x3
-#define      OFDM_SC_RA_RAM_OP_PARAM_MODE_2K                               0x0
-#define      OFDM_SC_RA_RAM_OP_PARAM_MODE_8K                               0x1
-#define      OFDM_SC_RA_RAM_OP_PARAM_GUARD_32                              0x0
-#define      OFDM_SC_RA_RAM_OP_PARAM_GUARD_16                              0x4
-#define      OFDM_SC_RA_RAM_OP_PARAM_GUARD_8                               0x8
-#define      OFDM_SC_RA_RAM_OP_PARAM_GUARD_4                               0xC
-#define      OFDM_SC_RA_RAM_OP_PARAM_CONST_QPSK                            0x0
-#define      OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM16                           0x10
-#define      OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM64                           0x20
-#define      OFDM_SC_RA_RAM_OP_PARAM_HIER_NO                               0x0
-#define      OFDM_SC_RA_RAM_OP_PARAM_HIER_A1                               0x40
-#define      OFDM_SC_RA_RAM_OP_PARAM_HIER_A2                               0x80
-#define      OFDM_SC_RA_RAM_OP_PARAM_HIER_A4                               0xC0
-#define      OFDM_SC_RA_RAM_OP_PARAM_RATE_1_2                              0x0
-#define      OFDM_SC_RA_RAM_OP_PARAM_RATE_2_3                              0x200
-#define      OFDM_SC_RA_RAM_OP_PARAM_RATE_3_4                              0x400
-#define      OFDM_SC_RA_RAM_OP_PARAM_RATE_5_6                              0x600
-#define      OFDM_SC_RA_RAM_OP_PARAM_RATE_7_8                              0x800
-#define      OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI                               0x0
-#define      OFDM_SC_RA_RAM_OP_PARAM_PRIO_LO                               0x1000
-#define    OFDM_SC_RA_RAM_OP_AUTO_MODE__M                                  0x1
-#define    OFDM_SC_RA_RAM_OP_AUTO_GUARD__M                                 0x2
-#define    OFDM_SC_RA_RAM_OP_AUTO_CONST__M                                 0x4
-#define    OFDM_SC_RA_RAM_OP_AUTO_HIER__M                                  0x8
-#define    OFDM_SC_RA_RAM_OP_AUTO_RATE__M                                  0x10
-#define  OFDM_SC_RA_RAM_LOCK__A                                            0x3C2004B
-#define    OFDM_SC_RA_RAM_LOCK_DEMOD__M                                    0x1
-#define    OFDM_SC_RA_RAM_LOCK_FEC__M                                      0x2
-#define    OFDM_SC_RA_RAM_LOCK_MPEG__M                                     0x4
-#define    OFDM_SC_RA_RAM_LOCK_NODVBT__M                                   0x8
-#define  OFDM_SC_RA_RAM_BE_OPT_DELAY__A                                    0x3C2004D
-#define  OFDM_SC_RA_RAM_BE_OPT_INIT_DELAY__A                               0x3C2004E
-#define  OFDM_SC_RA_RAM_ECHO_THRES__A                                      0x3C2004F
-#define    OFDM_SC_RA_RAM_ECHO_THRES_8K__B                                 0
-#define    OFDM_SC_RA_RAM_ECHO_THRES_8K__M                                 0xFF
-#define    OFDM_SC_RA_RAM_ECHO_THRES_2K__B                                 8
-#define    OFDM_SC_RA_RAM_ECHO_THRES_2K__M                                 0xFF00
-#define  OFDM_SC_RA_RAM_CONFIG__A                                          0x3C20050
-#define    OFDM_SC_RA_RAM_CONFIG_NE_FIX_ENABLE__M                          0x800
-#define  OFDM_SC_RA_RAM_FR_THRES_8K__A                                     0x3C2007D
-#define  OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A                             0x3C200E0
-#define  OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A                            0x3C200E1
-#define  OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A                             0x3C200E3
-#define  OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A                            0x3C200E4
-#define  OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A                                0x3C200F8
-#define  QAM_COMM_EXEC__A                                                  0x1400000
-#define    QAM_COMM_EXEC_STOP                                              0x0
-#define    QAM_COMM_EXEC_ACTIVE                                            0x1
-#define    QAM_TOP_ANNEX_A                                                 0x0
-#define    QAM_TOP_ANNEX_C                                                 0x2
-#define  QAM_SL_ERR_POWER__A                                               0x1430017
-#define  QAM_DQ_QUAL_FUN0__A                                               0x1440018
-#define  QAM_DQ_QUAL_FUN1__A                                               0x1440019
-#define  QAM_DQ_QUAL_FUN2__A                                               0x144001A
-#define  QAM_DQ_QUAL_FUN3__A                                               0x144001B
-#define  QAM_DQ_QUAL_FUN4__A                                               0x144001C
-#define  QAM_DQ_QUAL_FUN5__A                                               0x144001D
-#define  QAM_LC_MODE__A                                                    0x1450010
-#define  QAM_LC_QUAL_TAB0__A                                               0x1450018
-#define  QAM_LC_QUAL_TAB1__A                                               0x1450019
-#define  QAM_LC_QUAL_TAB2__A                                               0x145001A
-#define  QAM_LC_QUAL_TAB3__A                                               0x145001B
-#define  QAM_LC_QUAL_TAB4__A                                               0x145001C
-#define  QAM_LC_QUAL_TAB5__A                                               0x145001D
-#define  QAM_LC_QUAL_TAB6__A                                               0x145001E
-#define  QAM_LC_QUAL_TAB8__A                                               0x145001F
-#define  QAM_LC_QUAL_TAB9__A                                               0x1450020
-#define  QAM_LC_QUAL_TAB10__A                                              0x1450021
-#define  QAM_LC_QUAL_TAB12__A                                              0x1450022
-#define  QAM_LC_QUAL_TAB15__A                                              0x1450023
-#define  QAM_LC_QUAL_TAB16__A                                              0x1450024
-#define  QAM_LC_QUAL_TAB20__A                                              0x1450025
-#define  QAM_LC_QUAL_TAB25__A                                              0x1450026
-#define  QAM_LC_LPF_FACTORP__A                                             0x1450028
-#define  QAM_LC_LPF_FACTORI__A                                             0x1450029
-#define  QAM_LC_RATE_LIMIT__A                                              0x145002A
-#define  QAM_LC_SYMBOL_FREQ__A                                             0x145002B
-#define  QAM_SY_TIMEOUT__A                                                 0x1470011
-#define  QAM_SY_TIMEOUT__PRE                                               0x3A98
-#define  QAM_SY_SYNC_LWM__A                                                0x1470012
-#define  QAM_SY_SYNC_AWM__A                                                0x1470013
-#define  QAM_SY_SYNC_HWM__A                                                0x1470014
-#define  QAM_SY_SP_INV__A                                                  0x1470017
-#define    QAM_SY_SP_INV_SPECTRUM_INV_DIS                                  0x0
-#define  SCU_COMM_EXEC__A                                                  0x800000
-#define    SCU_COMM_EXEC_STOP                                              0x0
-#define    SCU_COMM_EXEC_ACTIVE                                            0x1
-#define    SCU_COMM_EXEC_HOLD                                              0x2
-#define  SCU_RAM_DRIVER_DEBUG__A                                           0x831EBF
-#define  SCU_RAM_QAM_FSM_STEP_PERIOD__A                                    0x831EC4
-#define  SCU_RAM_GPIO__A                                                   0x831EC7
-#define      SCU_RAM_GPIO_HW_LOCK_IND_DISABLE                              0x0
-#define  SCU_RAM_AGC_CLP_CTRL_MODE__A                                      0x831EC8
-#define  SCU_RAM_FEC_ACCUM_PKT_FAILURES__A                                 0x831ECB
-#define  SCU_RAM_FEC_PRE_RS_BER_FILTER_SH__A                               0x831F05
-#define  SCU_RAM_AGC_FAST_SNS_CTRL_DELAY__A                                0x831F15
-#define  SCU_RAM_AGC_KI_CYCLEN__A                                          0x831F17
-#define  SCU_RAM_AGC_SNS_CYCLEN__A                                         0x831F18
-#define  SCU_RAM_AGC_RF_SNS_DEV_MAX__A                                     0x831F19
-#define  SCU_RAM_AGC_RF_SNS_DEV_MIN__A                                     0x831F1A
-#define  SCU_RAM_AGC_RF_MAX__A                                             0x831F1B
-#define  SCU_RAM_AGC_CONFIG__A                                             0x831F24
-#define    SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M                            0x1
-#define    SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M                            0x2
-#define    SCU_RAM_AGC_CONFIG_INV_IF_POL__M                                0x100
-#define    SCU_RAM_AGC_CONFIG_INV_RF_POL__M                                0x200
-#define  SCU_RAM_AGC_KI__A                                                 0x831F25
-#define    SCU_RAM_AGC_KI_RF__B                                            4
-#define    SCU_RAM_AGC_KI_RF__M                                            0xF0
-#define    SCU_RAM_AGC_KI_IF__B                                            8
-#define    SCU_RAM_AGC_KI_IF__M                                            0xF00
-#define  SCU_RAM_AGC_KI_RED__A                                             0x831F26
-#define    SCU_RAM_AGC_KI_RED_RAGC_RED__B                                  2
-#define    SCU_RAM_AGC_KI_RED_RAGC_RED__M                                  0xC
-#define    SCU_RAM_AGC_KI_RED_IAGC_RED__B                                  4
-#define    SCU_RAM_AGC_KI_RED_IAGC_RED__M                                  0x30
-#define  SCU_RAM_AGC_KI_INNERGAIN_MIN__A                                   0x831F27
-#define  SCU_RAM_AGC_KI_MINGAIN__A                                         0x831F28
-#define  SCU_RAM_AGC_KI_MAXGAIN__A                                         0x831F29
-#define  SCU_RAM_AGC_KI_MAXMINGAIN_TH__A                                   0x831F2A
-#define  SCU_RAM_AGC_KI_MIN__A                                             0x831F2B
-#define  SCU_RAM_AGC_KI_MAX__A                                             0x831F2C
-#define  SCU_RAM_AGC_CLP_SUM__A                                            0x831F2D
-#define  SCU_RAM_AGC_CLP_SUM_MIN__A                                        0x831F2E
-#define  SCU_RAM_AGC_CLP_SUM_MAX__A                                        0x831F2F
-#define  SCU_RAM_AGC_CLP_CYCLEN__A                                         0x831F30
-#define  SCU_RAM_AGC_CLP_CYCCNT__A                                         0x831F31
-#define  SCU_RAM_AGC_CLP_DIR_TO__A                                         0x831F32
-#define  SCU_RAM_AGC_CLP_DIR_WD__A                                         0x831F33
-#define  SCU_RAM_AGC_CLP_DIR_STP__A                                        0x831F34
-#define  SCU_RAM_AGC_SNS_SUM__A                                            0x831F35
-#define  SCU_RAM_AGC_SNS_SUM_MIN__A                                        0x831F36
-#define  SCU_RAM_AGC_SNS_SUM_MAX__A                                        0x831F37
-#define  SCU_RAM_AGC_SNS_CYCCNT__A                                         0x831F38
-#define  SCU_RAM_AGC_SNS_DIR_TO__A                                         0x831F39
-#define  SCU_RAM_AGC_SNS_DIR_WD__A                                         0x831F3A
-#define  SCU_RAM_AGC_SNS_DIR_STP__A                                        0x831F3B
-#define  SCU_RAM_AGC_INGAIN_TGT__A                                         0x831F3D
-#define  SCU_RAM_AGC_INGAIN_TGT_MIN__A                                     0x831F3E
-#define  SCU_RAM_AGC_INGAIN_TGT_MAX__A                                     0x831F3F
-#define  SCU_RAM_AGC_IF_IACCU_HI__A                                        0x831F40
-#define  SCU_RAM_AGC_IF_IACCU_LO__A                                        0x831F41
-#define  SCU_RAM_AGC_IF_IACCU_HI_TGT__A                                    0x831F42
-#define  SCU_RAM_AGC_IF_IACCU_HI_TGT_MIN__A                                0x831F43
-#define  SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A                                0x831F44
-#define  SCU_RAM_AGC_RF_IACCU_HI__A                                        0x831F45
-#define  SCU_RAM_AGC_RF_IACCU_LO__A                                        0x831F46
-#define  SCU_RAM_AGC_RF_IACCU_HI_CO__A                                     0x831F47
-#define  SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A                                 0x831F84
-#define  SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A                                0x831F85
-#define  SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A                                  0x831F86
-#define  SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A                                  0x831F87
-#define  SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A                                  0x831F88
-#define  SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A                                  0x831F89
-#define  SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A                                  0x831F8A
-#define  SCU_RAM_QAM_FSM_RTH__A                                            0x831F8E
-#define  SCU_RAM_QAM_FSM_FTH__A                                            0x831F8F
-#define  SCU_RAM_QAM_FSM_PTH__A                                            0x831F90
-#define  SCU_RAM_QAM_FSM_MTH__A                                            0x831F91
-#define  SCU_RAM_QAM_FSM_CTH__A                                            0x831F92
-#define  SCU_RAM_QAM_FSM_QTH__A                                            0x831F93
-#define  SCU_RAM_QAM_FSM_RATE_LIM__A                                       0x831F94
-#define  SCU_RAM_QAM_FSM_FREQ_LIM__A                                       0x831F95
-#define  SCU_RAM_QAM_FSM_COUNT_LIM__A                                      0x831F96
-#define  SCU_RAM_QAM_LC_CA_COARSE__A                                       0x831F97
-#define  SCU_RAM_QAM_LC_CA_FINE__A                                         0x831F99
-#define  SCU_RAM_QAM_LC_CP_COARSE__A                                       0x831F9A
-#define  SCU_RAM_QAM_LC_CP_MEDIUM__A                                       0x831F9B
-#define  SCU_RAM_QAM_LC_CP_FINE__A                                         0x831F9C
-#define  SCU_RAM_QAM_LC_CI_COARSE__A                                       0x831F9D
-#define  SCU_RAM_QAM_LC_CI_MEDIUM__A                                       0x831F9E
-#define  SCU_RAM_QAM_LC_CI_FINE__A                                         0x831F9F
-#define  SCU_RAM_QAM_LC_EP_COARSE__A                                       0x831FA0
-#define  SCU_RAM_QAM_LC_EP_MEDIUM__A                                       0x831FA1
-#define  SCU_RAM_QAM_LC_EP_FINE__A                                         0x831FA2
-#define  SCU_RAM_QAM_LC_EI_COARSE__A                                       0x831FA3
-#define  SCU_RAM_QAM_LC_EI_MEDIUM__A                                       0x831FA4
-#define  SCU_RAM_QAM_LC_EI_FINE__A                                         0x831FA5
-#define  SCU_RAM_QAM_LC_CF_COARSE__A                                       0x831FA6
-#define  SCU_RAM_QAM_LC_CF_MEDIUM__A                                       0x831FA7
-#define  SCU_RAM_QAM_LC_CF_FINE__A                                         0x831FA8
-#define  SCU_RAM_QAM_LC_CF1_COARSE__A                                      0x831FA9
-#define  SCU_RAM_QAM_LC_CF1_MEDIUM__A                                      0x831FAA
-#define  SCU_RAM_QAM_LC_CF1_FINE__A                                        0x831FAB
-#define  SCU_RAM_QAM_SL_SIG_POWER__A                                       0x831FAC
-#define  SCU_RAM_QAM_EQ_CMA_RAD0__A                                        0x831FAD
-#define  SCU_RAM_QAM_EQ_CMA_RAD1__A                                        0x831FAE
-#define  SCU_RAM_QAM_EQ_CMA_RAD2__A                                        0x831FAF
-#define  SCU_RAM_QAM_EQ_CMA_RAD3__A                                        0x831FB0
-#define  SCU_RAM_QAM_EQ_CMA_RAD4__A                                        0x831FB1
-#define  SCU_RAM_QAM_EQ_CMA_RAD5__A                                        0x831FB2
-#define      SCU_RAM_QAM_LOCKED_LOCKED_DEMOD_LOCKED                        0x4000
-#define      SCU_RAM_QAM_LOCKED_LOCKED_LOCKED                              0x8000
-#define      SCU_RAM_QAM_LOCKED_LOCKED_NEVER_LOCK                          0xC000
-#define  SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A                                0x831FEA
-#define  SCU_RAM_DRIVER_VER_HI__A                                          0x831FEB
-#define  SCU_RAM_DRIVER_VER_LO__A                                          0x831FEC
-#define  SCU_RAM_PARAM_15__A                                               0x831FED
-#define  SCU_RAM_PARAM_0__A                                                0x831FFC
-#define  SCU_RAM_COMMAND__A                                                0x831FFD
-#define    SCU_RAM_COMMAND_CMD_DEMOD_RESET                                 0x1
-#define    SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV                               0x2
-#define    SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM                             0x3
-#define    SCU_RAM_COMMAND_CMD_DEMOD_START                                 0x4
-#define    SCU_RAM_COMMAND_CMD_DEMOD_GET_LOCK                              0x5
-#define    SCU_RAM_COMMAND_CMD_DEMOD_STOP                                  0x9
-#define      SCU_RAM_COMMAND_STANDARD_QAM                                  0x200
-#define      SCU_RAM_COMMAND_STANDARD_OFDM                                 0x400
-#define  SIO_TOP_COMM_KEY__A                                               0x41000F
-#define    SIO_TOP_COMM_KEY_KEY                                            0xFABA
-#define  SIO_TOP_JTAGID_LO__A                                              0x410012
-#define  SIO_HI_RA_RAM_RES__A                                              0x420031
-#define  SIO_HI_RA_RAM_CMD__A                                              0x420032
-#define    SIO_HI_RA_RAM_CMD_RESET                                         0x2
-#define    SIO_HI_RA_RAM_CMD_CONFIG                                        0x3
-#define    SIO_HI_RA_RAM_CMD_BRDCTRL                                       0x7
-#define  SIO_HI_RA_RAM_PAR_1__A                                            0x420033
-#define      SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY                              0x3945
-#define  SIO_HI_RA_RAM_PAR_2__A                                            0x420034
-#define    SIO_HI_RA_RAM_PAR_2_CFG_DIV__M                                  0x7F
-#define      SIO_HI_RA_RAM_PAR_2_BRD_CFG_OPEN                              0x0
-#define      SIO_HI_RA_RAM_PAR_2_BRD_CFG_CLOSED                            0x4
-#define  SIO_HI_RA_RAM_PAR_3__A                                            0x420035
-#define    SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M                              0x7F
-#define    SIO_HI_RA_RAM_PAR_3_CFG_DBL_SCL__B                              7
-#define      SIO_HI_RA_RAM_PAR_3_ACP_RW_READ                               0x0
-#define      SIO_HI_RA_RAM_PAR_3_ACP_RW_WRITE                              0x8
-#define  SIO_HI_RA_RAM_PAR_4__A                                            0x420036
-#define  SIO_HI_RA_RAM_PAR_5__A                                            0x420037
-#define      SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE                            0x1
-#define    SIO_HI_RA_RAM_PAR_5_CFG_SLEEP__M                                0x8
-#define      SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ                             0x8
-#define  SIO_HI_RA_RAM_PAR_6__A                                            0x420038
-#define  SIO_CC_PLL_LOCK__A                                                0x450012
-#define  SIO_CC_PWD_MODE__A                                                0x450015
-#define      SIO_CC_PWD_MODE_LEVEL_NONE                                    0x0
-#define      SIO_CC_PWD_MODE_LEVEL_OFDM                                    0x1
-#define      SIO_CC_PWD_MODE_LEVEL_CLOCK                                   0x2
-#define      SIO_CC_PWD_MODE_LEVEL_PLL                                     0x3
-#define      SIO_CC_PWD_MODE_LEVEL_OSC                                     0x4
-#define  SIO_CC_SOFT_RST__A                                                0x450016
-#define    SIO_CC_SOFT_RST_OFDM__M                                         0x1
-#define    SIO_CC_SOFT_RST_SYS__M                                          0x2
-#define    SIO_CC_SOFT_RST_OSC__M                                          0x4
-#define  SIO_CC_UPDATE__A                                                  0x450017
-#define    SIO_CC_UPDATE_KEY                                               0xFABA
-#define  SIO_OFDM_SH_OFDM_RING_ENABLE__A                                   0x470010
-#define    SIO_OFDM_SH_OFDM_RING_ENABLE_OFF                                0x0
-#define    SIO_OFDM_SH_OFDM_RING_ENABLE_ON                                 0x1
-#define  SIO_OFDM_SH_OFDM_RING_STATUS__A                                   0x470012
-#define    SIO_OFDM_SH_OFDM_RING_STATUS_DOWN                               0x0
-#define    SIO_OFDM_SH_OFDM_RING_STATUS_ENABLED                            0x1
-#define  SIO_BL_COMM_EXEC__A                                               0x480000
-#define    SIO_BL_COMM_EXEC_ACTIVE                                         0x1
-#define  SIO_BL_STATUS__A                                                  0x480010
-#define  SIO_BL_MODE__A                                                    0x480011
-#define    SIO_BL_MODE_DIRECT                                              0x0
-#define    SIO_BL_MODE_CHAIN                                               0x1
-#define  SIO_BL_ENABLE__A                                                  0x480012
-#define    SIO_BL_ENABLE_ON                                                0x1
-#define  SIO_BL_TGT_HDR__A                                                 0x480014
-#define  SIO_BL_TGT_ADDR__A                                                0x480015
-#define  SIO_BL_SRC_ADDR__A                                                0x480016
-#define  SIO_BL_SRC_LEN__A                                                 0x480017
-#define  SIO_BL_CHAIN_ADDR__A                                              0x480018
-#define  SIO_BL_CHAIN_LEN__A                                               0x480019
-#define  SIO_PDR_MON_CFG__A                                                0x7F0010
-#define  SIO_PDR_UIO_IN_HI__A                                              0x7F0015
-#define  SIO_PDR_UIO_OUT_LO__A                                             0x7F0016
-#define  SIO_PDR_OHW_CFG__A                                                0x7F001F
-#define    SIO_PDR_OHW_CFG_FREF_SEL__M                                     0x3
-#define  SIO_PDR_GPIO_CFG__A                                               0x7F0021
-#define  SIO_PDR_MSTRT_CFG__A                                              0x7F0025
-#define  SIO_PDR_MERR_CFG__A                                               0x7F0026
-#define  SIO_PDR_MCLK_CFG__A                                               0x7F0028
-#define    SIO_PDR_MCLK_CFG_DRIVE__B                                       3
-#define  SIO_PDR_MVAL_CFG__A                                               0x7F0029
-#define  SIO_PDR_MD0_CFG__A                                                0x7F002A
-#define    SIO_PDR_MD0_CFG_DRIVE__B                                        3
-#define  SIO_PDR_MD1_CFG__A                                                0x7F002B
-#define  SIO_PDR_MD2_CFG__A                                                0x7F002C
-#define  SIO_PDR_MD3_CFG__A                                                0x7F002D
-#define  SIO_PDR_MD4_CFG__A                                                0x7F002F
-#define  SIO_PDR_MD5_CFG__A                                                0x7F0030
-#define  SIO_PDR_MD6_CFG__A                                                0x7F0031
-#define  SIO_PDR_MD7_CFG__A                                                0x7F0032
-#define  SIO_PDR_SMA_RX_CFG__A                                             0x7F0037
-#define  SIO_PDR_SMA_TX_CFG__A                                             0x7F0038
diff --git a/drivers/media/dvb/frontends/ds3000.c b/drivers/media/dvb/frontends/ds3000.c
deleted file mode 100644
index 4c8ac26..0000000
--- a/drivers/media/dvb/frontends/ds3000.c
+++ /dev/null
@@ -1,1312 +0,0 @@
-/*
-    Montage Technology DS3000/TS2020 - DVBS/S2 Demodulator/Tuner driver
-    Copyright (C) 2009 Konstantin Dimitrov <kosio.dimitrov@gmail.com>
-
-    Copyright (C) 2009 TurboSight.com
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/firmware.h>
-
-#include "dvb_frontend.h"
-#include "ds3000.h"
-
-static int debug;
-
-#define dprintk(args...) \
-	do { \
-		if (debug) \
-			printk(args); \
-	} while (0)
-
-/* as of March 2009 current DS3000 firmware version is 1.78 */
-/* DS3000 FW v1.78 MD5: a32d17910c4f370073f9346e71d34b80 */
-#define DS3000_DEFAULT_FIRMWARE "dvb-fe-ds3000.fw"
-
-#define DS3000_SAMPLE_RATE 96000 /* in kHz */
-#define DS3000_XTAL_FREQ   27000 /* in kHz */
-
-/* Register values to initialise the demod in DVB-S mode */
-static u8 ds3000_dvbs_init_tab[] = {
-	0x23, 0x05,
-	0x08, 0x03,
-	0x0c, 0x00,
-	0x21, 0x54,
-	0x25, 0x82,
-	0x27, 0x31,
-	0x30, 0x08,
-	0x31, 0x40,
-	0x32, 0x32,
-	0x33, 0x35,
-	0x35, 0xff,
-	0x3a, 0x00,
-	0x37, 0x10,
-	0x38, 0x10,
-	0x39, 0x02,
-	0x42, 0x60,
-	0x4a, 0x40,
-	0x4b, 0x04,
-	0x4d, 0x91,
-	0x5d, 0xc8,
-	0x50, 0x77,
-	0x51, 0x77,
-	0x52, 0x36,
-	0x53, 0x36,
-	0x56, 0x01,
-	0x63, 0x43,
-	0x64, 0x30,
-	0x65, 0x40,
-	0x68, 0x26,
-	0x69, 0x4c,
-	0x70, 0x20,
-	0x71, 0x70,
-	0x72, 0x04,
-	0x73, 0x00,
-	0x70, 0x40,
-	0x71, 0x70,
-	0x72, 0x04,
-	0x73, 0x00,
-	0x70, 0x60,
-	0x71, 0x70,
-	0x72, 0x04,
-	0x73, 0x00,
-	0x70, 0x80,
-	0x71, 0x70,
-	0x72, 0x04,
-	0x73, 0x00,
-	0x70, 0xa0,
-	0x71, 0x70,
-	0x72, 0x04,
-	0x73, 0x00,
-	0x70, 0x1f,
-	0x76, 0x00,
-	0x77, 0xd1,
-	0x78, 0x0c,
-	0x79, 0x80,
-	0x7f, 0x04,
-	0x7c, 0x00,
-	0x80, 0x86,
-	0x81, 0xa6,
-	0x85, 0x04,
-	0xcd, 0xf4,
-	0x90, 0x33,
-	0xa0, 0x44,
-	0xc0, 0x18,
-	0xc3, 0x10,
-	0xc4, 0x08,
-	0xc5, 0x80,
-	0xc6, 0x80,
-	0xc7, 0x0a,
-	0xc8, 0x1a,
-	0xc9, 0x80,
-	0xfe, 0x92,
-	0xe0, 0xf8,
-	0xe6, 0x8b,
-	0xd0, 0x40,
-	0xf8, 0x20,
-	0xfa, 0x0f,
-	0xfd, 0x20,
-	0xad, 0x20,
-	0xae, 0x07,
-	0xb8, 0x00,
-};
-
-/* Register values to initialise the demod in DVB-S2 mode */
-static u8 ds3000_dvbs2_init_tab[] = {
-	0x23, 0x0f,
-	0x08, 0x07,
-	0x0c, 0x00,
-	0x21, 0x54,
-	0x25, 0x82,
-	0x27, 0x31,
-	0x30, 0x08,
-	0x31, 0x32,
-	0x32, 0x32,
-	0x33, 0x35,
-	0x35, 0xff,
-	0x3a, 0x00,
-	0x37, 0x10,
-	0x38, 0x10,
-	0x39, 0x02,
-	0x42, 0x60,
-	0x4a, 0x80,
-	0x4b, 0x04,
-	0x4d, 0x81,
-	0x5d, 0x88,
-	0x50, 0x36,
-	0x51, 0x36,
-	0x52, 0x36,
-	0x53, 0x36,
-	0x63, 0x60,
-	0x64, 0x10,
-	0x65, 0x10,
-	0x68, 0x04,
-	0x69, 0x29,
-	0x70, 0x20,
-	0x71, 0x70,
-	0x72, 0x04,
-	0x73, 0x00,
-	0x70, 0x40,
-	0x71, 0x70,
-	0x72, 0x04,
-	0x73, 0x00,
-	0x70, 0x60,
-	0x71, 0x70,
-	0x72, 0x04,
-	0x73, 0x00,
-	0x70, 0x80,
-	0x71, 0x70,
-	0x72, 0x04,
-	0x73, 0x00,
-	0x70, 0xa0,
-	0x71, 0x70,
-	0x72, 0x04,
-	0x73, 0x00,
-	0x70, 0x1f,
-	0xa0, 0x44,
-	0xc0, 0x08,
-	0xc1, 0x10,
-	0xc2, 0x08,
-	0xc3, 0x10,
-	0xc4, 0x08,
-	0xc5, 0xf0,
-	0xc6, 0xf0,
-	0xc7, 0x0a,
-	0xc8, 0x1a,
-	0xc9, 0x80,
-	0xca, 0x23,
-	0xcb, 0x24,
-	0xce, 0x74,
-	0x90, 0x03,
-	0x76, 0x80,
-	0x77, 0x42,
-	0x78, 0x0a,
-	0x79, 0x80,
-	0xad, 0x40,
-	0xae, 0x07,
-	0x7f, 0xd4,
-	0x7c, 0x00,
-	0x80, 0xa8,
-	0x81, 0xda,
-	0x7c, 0x01,
-	0x80, 0xda,
-	0x81, 0xec,
-	0x7c, 0x02,
-	0x80, 0xca,
-	0x81, 0xeb,
-	0x7c, 0x03,
-	0x80, 0xba,
-	0x81, 0xdb,
-	0x85, 0x08,
-	0x86, 0x00,
-	0x87, 0x02,
-	0x89, 0x80,
-	0x8b, 0x44,
-	0x8c, 0xaa,
-	0x8a, 0x10,
-	0xba, 0x00,
-	0xf5, 0x04,
-	0xfe, 0x44,
-	0xd2, 0x32,
-	0xb8, 0x00,
-};
-
-struct ds3000_state {
-	struct i2c_adapter *i2c;
-	const struct ds3000_config *config;
-	struct dvb_frontend frontend;
-	u8 skip_fw_load;
-	/* previous uncorrected block counter for DVB-S2 */
-	u16 prevUCBS2;
-};
-
-static int ds3000_writereg(struct ds3000_state *state, int reg, int data)
-{
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg = { .addr = state->config->demod_address,
-		.flags = 0, .buf = buf, .len = 2 };
-	int err;
-
-	dprintk("%s: write reg 0x%02x, value 0x%02x\n", __func__, reg, data);
-
-	err = i2c_transfer(state->i2c, &msg, 1);
-	if (err != 1) {
-		printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x,"
-			 " value == 0x%02x)\n", __func__, err, reg, data);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int ds3000_tuner_writereg(struct ds3000_state *state, int reg, int data)
-{
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg = { .addr = 0x60,
-		.flags = 0, .buf = buf, .len = 2 };
-	int err;
-
-	dprintk("%s: write reg 0x%02x, value 0x%02x\n", __func__, reg, data);
-
-	ds3000_writereg(state, 0x03, 0x11);
-	err = i2c_transfer(state->i2c, &msg, 1);
-	if (err != 1) {
-		printk("%s: writereg error(err == %i, reg == 0x%02x,"
-			 " value == 0x%02x)\n", __func__, err, reg, data);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-/* I2C write for 8k firmware load */
-static int ds3000_writeFW(struct ds3000_state *state, int reg,
-				const u8 *data, u16 len)
-{
-	int i, ret = -EREMOTEIO;
-	struct i2c_msg msg;
-	u8 *buf;
-
-	buf = kmalloc(33, GFP_KERNEL);
-	if (buf == NULL) {
-		printk(KERN_ERR "Unable to kmalloc\n");
-		ret = -ENOMEM;
-		goto error;
-	}
-
-	*(buf) = reg;
-
-	msg.addr = state->config->demod_address;
-	msg.flags = 0;
-	msg.buf = buf;
-	msg.len = 33;
-
-	for (i = 0; i < len; i += 32) {
-		memcpy(buf + 1, data + i, 32);
-
-		dprintk("%s: write reg 0x%02x, len = %d\n", __func__, reg, len);
-
-		ret = i2c_transfer(state->i2c, &msg, 1);
-		if (ret != 1) {
-			printk(KERN_ERR "%s: write error(err == %i, "
-				"reg == 0x%02x\n", __func__, ret, reg);
-			ret = -EREMOTEIO;
-		}
-	}
-
-error:
-	kfree(buf);
-
-	return ret;
-}
-
-static int ds3000_readreg(struct ds3000_state *state, u8 reg)
-{
-	int ret;
-	u8 b0[] = { reg };
-	u8 b1[] = { 0 };
-	struct i2c_msg msg[] = {
-		{
-			.addr = state->config->demod_address,
-			.flags = 0,
-			.buf = b0,
-			.len = 1
-		}, {
-			.addr = state->config->demod_address,
-			.flags = I2C_M_RD,
-			.buf = b1,
-			.len = 1
-		}
-	};
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2) {
-		printk(KERN_ERR "%s: reg=0x%x(error=%d)\n", __func__, reg, ret);
-		return ret;
-	}
-
-	dprintk("%s: read reg 0x%02x, value 0x%02x\n", __func__, reg, b1[0]);
-
-	return b1[0];
-}
-
-static int ds3000_tuner_readreg(struct ds3000_state *state, u8 reg)
-{
-	int ret;
-	u8 b0[] = { reg };
-	u8 b1[] = { 0 };
-	struct i2c_msg msg[] = {
-		{
-			.addr = 0x60,
-			.flags = 0,
-			.buf = b0,
-			.len = 1
-		}, {
-			.addr = 0x60,
-			.flags = I2C_M_RD,
-			.buf = b1,
-			.len = 1
-		}
-	};
-
-	ds3000_writereg(state, 0x03, 0x12);
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2) {
-		printk(KERN_ERR "%s: reg=0x%x(error=%d)\n", __func__, reg, ret);
-		return ret;
-	}
-
-	dprintk("%s: read reg 0x%02x, value 0x%02x\n", __func__, reg, b1[0]);
-
-	return b1[0];
-}
-
-static int ds3000_load_firmware(struct dvb_frontend *fe,
-					const struct firmware *fw);
-
-static int ds3000_firmware_ondemand(struct dvb_frontend *fe)
-{
-	struct ds3000_state *state = fe->demodulator_priv;
-	const struct firmware *fw;
-	int ret = 0;
-
-	dprintk("%s()\n", __func__);
-
-	if (ds3000_readreg(state, 0xb2) <= 0)
-		return ret;
-
-	if (state->skip_fw_load)
-		return 0;
-	/* Load firmware */
-	/* request the firmware, this will block until someone uploads it */
-	printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n", __func__,
-				DS3000_DEFAULT_FIRMWARE);
-	ret = request_firmware(&fw, DS3000_DEFAULT_FIRMWARE,
-				state->i2c->dev.parent);
-	printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", __func__);
-	if (ret) {
-		printk(KERN_ERR "%s: No firmware uploaded (timeout or file not "
-				"found?)\n", __func__);
-		return ret;
-	}
-
-	/* Make sure we don't recurse back through here during loading */
-	state->skip_fw_load = 1;
-
-	ret = ds3000_load_firmware(fe, fw);
-	if (ret)
-		printk("%s: Writing firmware to device failed\n", __func__);
-
-	release_firmware(fw);
-
-	dprintk("%s: Firmware upload %s\n", __func__,
-			ret == 0 ? "complete" : "failed");
-
-	/* Ensure firmware is always loaded if required */
-	state->skip_fw_load = 0;
-
-	return ret;
-}
-
-static int ds3000_load_firmware(struct dvb_frontend *fe,
-					const struct firmware *fw)
-{
-	struct ds3000_state *state = fe->demodulator_priv;
-
-	dprintk("%s\n", __func__);
-	dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n",
-			fw->size,
-			fw->data[0],
-			fw->data[1],
-			fw->data[fw->size - 2],
-			fw->data[fw->size - 1]);
-
-	/* Begin the firmware load process */
-	ds3000_writereg(state, 0xb2, 0x01);
-	/* write the entire firmware */
-	ds3000_writeFW(state, 0xb0, fw->data, fw->size);
-	ds3000_writereg(state, 0xb2, 0x00);
-
-	return 0;
-}
-
-static int ds3000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-{
-	struct ds3000_state *state = fe->demodulator_priv;
-	u8 data;
-
-	dprintk("%s(%d)\n", __func__, voltage);
-
-	data = ds3000_readreg(state, 0xa2);
-	data |= 0x03; /* bit0 V/H, bit1 off/on */
-
-	switch (voltage) {
-	case SEC_VOLTAGE_18:
-		data &= ~0x03;
-		break;
-	case SEC_VOLTAGE_13:
-		data &= ~0x03;
-		data |= 0x01;
-		break;
-	case SEC_VOLTAGE_OFF:
-		break;
-	}
-
-	ds3000_writereg(state, 0xa2, data);
-
-	return 0;
-}
-
-static int ds3000_read_status(struct dvb_frontend *fe, fe_status_t* status)
-{
-	struct ds3000_state *state = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	int lock;
-
-	*status = 0;
-
-	switch (c->delivery_system) {
-	case SYS_DVBS:
-		lock = ds3000_readreg(state, 0xd1);
-		if ((lock & 0x07) == 0x07)
-			*status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
-				FE_HAS_VITERBI | FE_HAS_SYNC |
-				FE_HAS_LOCK;
-
-		break;
-	case SYS_DVBS2:
-		lock = ds3000_readreg(state, 0x0d);
-		if ((lock & 0x8f) == 0x8f)
-			*status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
-				FE_HAS_VITERBI | FE_HAS_SYNC |
-				FE_HAS_LOCK;
-
-		break;
-	default:
-		return 1;
-	}
-
-	dprintk("%s: status = 0x%02x\n", __func__, lock);
-
-	return 0;
-}
-
-/* read DS3000 BER value */
-static int ds3000_read_ber(struct dvb_frontend *fe, u32* ber)
-{
-	struct ds3000_state *state = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	u8 data;
-	u32 ber_reading, lpdc_frames;
-
-	dprintk("%s()\n", __func__);
-
-	switch (c->delivery_system) {
-	case SYS_DVBS:
-		/* set the number of bytes checked during
-		BER estimation */
-		ds3000_writereg(state, 0xf9, 0x04);
-		/* read BER estimation status */
-		data = ds3000_readreg(state, 0xf8);
-		/* check if BER estimation is ready */
-		if ((data & 0x10) == 0) {
-			/* this is the number of error bits,
-			to calculate the bit error rate
-			divide to 8388608 */
-			*ber = (ds3000_readreg(state, 0xf7) << 8) |
-				ds3000_readreg(state, 0xf6);
-			/* start counting error bits */
-			/* need to be set twice
-			otherwise it fails sometimes */
-			data |= 0x10;
-			ds3000_writereg(state, 0xf8, data);
-			ds3000_writereg(state, 0xf8, data);
-		} else
-			/* used to indicate that BER estimation
-			is not ready, i.e. BER is unknown */
-			*ber = 0xffffffff;
-		break;
-	case SYS_DVBS2:
-		/* read the number of LPDC decoded frames */
-		lpdc_frames = (ds3000_readreg(state, 0xd7) << 16) |
-				(ds3000_readreg(state, 0xd6) << 8) |
-				ds3000_readreg(state, 0xd5);
-		/* read the number of packets with bad CRC */
-		ber_reading = (ds3000_readreg(state, 0xf8) << 8) |
-				ds3000_readreg(state, 0xf7);
-		if (lpdc_frames > 750) {
-			/* clear LPDC frame counters */
-			ds3000_writereg(state, 0xd1, 0x01);
-			/* clear bad packets counter */
-			ds3000_writereg(state, 0xf9, 0x01);
-			/* enable bad packets counter */
-			ds3000_writereg(state, 0xf9, 0x00);
-			/* enable LPDC frame counters */
-			ds3000_writereg(state, 0xd1, 0x00);
-			*ber = ber_reading;
-		} else
-			/* used to indicate that BER estimation is not ready,
-			i.e. BER is unknown */
-			*ber = 0xffffffff;
-		break;
-	default:
-		return 1;
-	}
-
-	return 0;
-}
-
-/* read TS2020 signal strength */
-static int ds3000_read_signal_strength(struct dvb_frontend *fe,
-						u16 *signal_strength)
-{
-	struct ds3000_state *state = fe->demodulator_priv;
-	u16 sig_reading, sig_strength;
-	u8 rfgain, bbgain;
-
-	dprintk("%s()\n", __func__);
-
-	rfgain = ds3000_tuner_readreg(state, 0x3d) & 0x1f;
-	bbgain = ds3000_tuner_readreg(state, 0x21) & 0x1f;
-
-	if (rfgain > 15)
-		rfgain = 15;
-	if (bbgain > 13)
-		bbgain = 13;
-
-	sig_reading = rfgain * 2 + bbgain * 3;
-
-	sig_strength = 40 + (64 - sig_reading) * 50 / 64 ;
-
-	/* cook the value to be suitable for szap-s2 human readable output */
-	*signal_strength = sig_strength * 1000;
-
-	dprintk("%s: raw / cooked = 0x%04x / 0x%04x\n", __func__,
-			sig_reading, *signal_strength);
-
-	return 0;
-}
-
-/* calculate DS3000 snr value in dB */
-static int ds3000_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct ds3000_state *state = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	u8 snr_reading, snr_value;
-	u32 dvbs2_signal_reading, dvbs2_noise_reading, tmp;
-	static const u16 dvbs_snr_tab[] = { /* 20 x Table (rounded up) */
-		0x0000, 0x1b13, 0x2aea, 0x3627, 0x3ede, 0x45fe, 0x4c03,
-		0x513a, 0x55d4, 0x59f2, 0x5dab, 0x6111, 0x6431, 0x6717,
-		0x69c9, 0x6c4e, 0x6eac, 0x70e8, 0x7304, 0x7505
-	};
-	static const u16 dvbs2_snr_tab[] = { /* 80 x Table (rounded up) */
-		0x0000, 0x0bc2, 0x12a3, 0x1785, 0x1b4e, 0x1e65, 0x2103,
-		0x2347, 0x2546, 0x2710, 0x28ae, 0x2a28, 0x2b83, 0x2cc5,
-		0x2df1, 0x2f09, 0x3010, 0x3109, 0x31f4, 0x32d2, 0x33a6,
-		0x3470, 0x3531, 0x35ea, 0x369b, 0x3746, 0x37ea, 0x3888,
-		0x3920, 0x39b3, 0x3a42, 0x3acc, 0x3b51, 0x3bd3, 0x3c51,
-		0x3ccb, 0x3d42, 0x3db6, 0x3e27, 0x3e95, 0x3f00, 0x3f68,
-		0x3fcf, 0x4033, 0x4094, 0x40f4, 0x4151, 0x41ac, 0x4206,
-		0x425e, 0x42b4, 0x4308, 0x435b, 0x43ac, 0x43fc, 0x444a,
-		0x4497, 0x44e2, 0x452d, 0x4576, 0x45bd, 0x4604, 0x4649,
-		0x468e, 0x46d1, 0x4713, 0x4755, 0x4795, 0x47d4, 0x4813,
-		0x4851, 0x488d, 0x48c9, 0x4904, 0x493f, 0x4978, 0x49b1,
-		0x49e9, 0x4a20, 0x4a57
-	};
-
-	dprintk("%s()\n", __func__);
-
-	switch (c->delivery_system) {
-	case SYS_DVBS:
-		snr_reading = ds3000_readreg(state, 0xff);
-		snr_reading /= 8;
-		if (snr_reading == 0)
-			*snr = 0x0000;
-		else {
-			if (snr_reading > 20)
-				snr_reading = 20;
-			snr_value = dvbs_snr_tab[snr_reading - 1] * 10 / 23026;
-			/* cook the value to be suitable for szap-s2
-			human readable output */
-			*snr = snr_value * 8 * 655;
-		}
-		dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__,
-				snr_reading, *snr);
-		break;
-	case SYS_DVBS2:
-		dvbs2_noise_reading = (ds3000_readreg(state, 0x8c) & 0x3f) +
-				(ds3000_readreg(state, 0x8d) << 4);
-		dvbs2_signal_reading = ds3000_readreg(state, 0x8e);
-		tmp = dvbs2_signal_reading * dvbs2_signal_reading >> 1;
-		if (tmp == 0) {
-			*snr = 0x0000;
-			return 0;
-		}
-		if (dvbs2_noise_reading == 0) {
-			snr_value = 0x0013;
-			/* cook the value to be suitable for szap-s2
-			human readable output */
-			*snr = 0xffff;
-			return 0;
-		}
-		if (tmp > dvbs2_noise_reading) {
-			snr_reading = tmp / dvbs2_noise_reading;
-			if (snr_reading > 80)
-				snr_reading = 80;
-			snr_value = dvbs2_snr_tab[snr_reading - 1] / 1000;
-			/* cook the value to be suitable for szap-s2
-			human readable output */
-			*snr = snr_value * 5 * 655;
-		} else {
-			snr_reading = dvbs2_noise_reading / tmp;
-			if (snr_reading > 80)
-				snr_reading = 80;
-			*snr = -(dvbs2_snr_tab[snr_reading] / 1000);
-		}
-		dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__,
-				snr_reading, *snr);
-		break;
-	default:
-		return 1;
-	}
-
-	return 0;
-}
-
-/* read DS3000 uncorrected blocks */
-static int ds3000_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	struct ds3000_state *state = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	u8 data;
-	u16 _ucblocks;
-
-	dprintk("%s()\n", __func__);
-
-	switch (c->delivery_system) {
-	case SYS_DVBS:
-		*ucblocks = (ds3000_readreg(state, 0xf5) << 8) |
-				ds3000_readreg(state, 0xf4);
-		data = ds3000_readreg(state, 0xf8);
-		/* clear packet counters */
-		data &= ~0x20;
-		ds3000_writereg(state, 0xf8, data);
-		/* enable packet counters */
-		data |= 0x20;
-		ds3000_writereg(state, 0xf8, data);
-		break;
-	case SYS_DVBS2:
-		_ucblocks = (ds3000_readreg(state, 0xe2) << 8) |
-				ds3000_readreg(state, 0xe1);
-		if (_ucblocks > state->prevUCBS2)
-			*ucblocks = _ucblocks - state->prevUCBS2;
-		else
-			*ucblocks = state->prevUCBS2 - _ucblocks;
-		state->prevUCBS2 = _ucblocks;
-		break;
-	default:
-		return 1;
-	}
-
-	return 0;
-}
-
-static int ds3000_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
-{
-	struct ds3000_state *state = fe->demodulator_priv;
-	u8 data;
-
-	dprintk("%s(%d)\n", __func__, tone);
-	if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) {
-		printk(KERN_ERR "%s: Invalid, tone=%d\n", __func__, tone);
-		return -EINVAL;
-	}
-
-	data = ds3000_readreg(state, 0xa2);
-	data &= ~0xc0;
-	ds3000_writereg(state, 0xa2, data);
-
-	switch (tone) {
-	case SEC_TONE_ON:
-		dprintk("%s: setting tone on\n", __func__);
-		data = ds3000_readreg(state, 0xa1);
-		data &= ~0x43;
-		data |= 0x04;
-		ds3000_writereg(state, 0xa1, data);
-		break;
-	case SEC_TONE_OFF:
-		dprintk("%s: setting tone off\n", __func__);
-		data = ds3000_readreg(state, 0xa2);
-		data |= 0x80;
-		ds3000_writereg(state, 0xa2, data);
-		break;
-	}
-
-	return 0;
-}
-
-static int ds3000_send_diseqc_msg(struct dvb_frontend *fe,
-				struct dvb_diseqc_master_cmd *d)
-{
-	struct ds3000_state *state = fe->demodulator_priv;
-	int i;
-	u8 data;
-
-	/* Dump DiSEqC message */
-	dprintk("%s(", __func__);
-	for (i = 0 ; i < d->msg_len;) {
-		dprintk("0x%02x", d->msg[i]);
-		if (++i < d->msg_len)
-			dprintk(", ");
-	}
-
-	/* enable DiSEqC message send pin */
-	data = ds3000_readreg(state, 0xa2);
-	data &= ~0xc0;
-	ds3000_writereg(state, 0xa2, data);
-
-	/* DiSEqC message */
-	for (i = 0; i < d->msg_len; i++)
-		ds3000_writereg(state, 0xa3 + i, d->msg[i]);
-
-	data = ds3000_readreg(state, 0xa1);
-	/* clear DiSEqC message length and status,
-	enable DiSEqC message send */
-	data &= ~0xf8;
-	/* set DiSEqC mode, modulation active during 33 pulses,
-	set DiSEqC message length */
-	data |= ((d->msg_len - 1) << 3) | 0x07;
-	ds3000_writereg(state, 0xa1, data);
-
-	/* wait up to 150ms for DiSEqC transmission to complete */
-	for (i = 0; i < 15; i++) {
-		data = ds3000_readreg(state, 0xa1);
-		if ((data & 0x40) == 0)
-			break;
-		msleep(10);
-	}
-
-	/* DiSEqC timeout after 150ms */
-	if (i == 15) {
-		data = ds3000_readreg(state, 0xa1);
-		data &= ~0x80;
-		data |= 0x40;
-		ds3000_writereg(state, 0xa1, data);
-
-		data = ds3000_readreg(state, 0xa2);
-		data &= ~0xc0;
-		data |= 0x80;
-		ds3000_writereg(state, 0xa2, data);
-
-		return 1;
-	}
-
-	data = ds3000_readreg(state, 0xa2);
-	data &= ~0xc0;
-	data |= 0x80;
-	ds3000_writereg(state, 0xa2, data);
-
-	return 0;
-}
-
-/* Send DiSEqC burst */
-static int ds3000_diseqc_send_burst(struct dvb_frontend *fe,
-					fe_sec_mini_cmd_t burst)
-{
-	struct ds3000_state *state = fe->demodulator_priv;
-	int i;
-	u8 data;
-
-	dprintk("%s()\n", __func__);
-
-	data = ds3000_readreg(state, 0xa2);
-	data &= ~0xc0;
-	ds3000_writereg(state, 0xa2, data);
-
-	/* DiSEqC burst */
-	if (burst == SEC_MINI_A)
-		/* Unmodulated tone burst */
-		ds3000_writereg(state, 0xa1, 0x02);
-	else if (burst == SEC_MINI_B)
-		/* Modulated tone burst */
-		ds3000_writereg(state, 0xa1, 0x01);
-	else
-		return -EINVAL;
-
-	msleep(13);
-	for (i = 0; i < 5; i++) {
-		data = ds3000_readreg(state, 0xa1);
-		if ((data & 0x40) == 0)
-			break;
-		msleep(1);
-	}
-
-	if (i == 5) {
-		data = ds3000_readreg(state, 0xa1);
-		data &= ~0x80;
-		data |= 0x40;
-		ds3000_writereg(state, 0xa1, data);
-
-		data = ds3000_readreg(state, 0xa2);
-		data &= ~0xc0;
-		data |= 0x80;
-		ds3000_writereg(state, 0xa2, data);
-
-		return 1;
-	}
-
-	data = ds3000_readreg(state, 0xa2);
-	data &= ~0xc0;
-	data |= 0x80;
-	ds3000_writereg(state, 0xa2, data);
-
-	return 0;
-}
-
-static void ds3000_release(struct dvb_frontend *fe)
-{
-	struct ds3000_state *state = fe->demodulator_priv;
-	dprintk("%s\n", __func__);
-	kfree(state);
-}
-
-static struct dvb_frontend_ops ds3000_ops;
-
-struct dvb_frontend *ds3000_attach(const struct ds3000_config *config,
-				    struct i2c_adapter *i2c)
-{
-	struct ds3000_state *state = NULL;
-	int ret;
-
-	dprintk("%s\n", __func__);
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct ds3000_state), GFP_KERNEL);
-	if (state == NULL) {
-		printk(KERN_ERR "Unable to kmalloc\n");
-		goto error2;
-	}
-
-	state->config = config;
-	state->i2c = i2c;
-	state->prevUCBS2 = 0;
-
-	/* check if the demod is present */
-	ret = ds3000_readreg(state, 0x00) & 0xfe;
-	if (ret != 0xe0) {
-		printk(KERN_ERR "Invalid probe, probably not a DS3000\n");
-		goto error3;
-	}
-
-	printk(KERN_INFO "DS3000 chip version: %d.%d attached.\n",
-			ds3000_readreg(state, 0x02),
-			ds3000_readreg(state, 0x01));
-
-	memcpy(&state->frontend.ops, &ds3000_ops,
-			sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error3:
-	kfree(state);
-error2:
-	return NULL;
-}
-EXPORT_SYMBOL(ds3000_attach);
-
-static int ds3000_set_carrier_offset(struct dvb_frontend *fe,
-					s32 carrier_offset_khz)
-{
-	struct ds3000_state *state = fe->demodulator_priv;
-	s32 tmp;
-
-	tmp = carrier_offset_khz;
-	tmp *= 65536;
-	tmp = (2 * tmp + DS3000_SAMPLE_RATE) / (2 * DS3000_SAMPLE_RATE);
-
-	if (tmp < 0)
-		tmp += 65536;
-
-	ds3000_writereg(state, 0x5f, tmp >> 8);
-	ds3000_writereg(state, 0x5e, tmp & 0xff);
-
-	return 0;
-}
-
-static int ds3000_set_frontend(struct dvb_frontend *fe)
-{
-	struct ds3000_state *state = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-
-	int i;
-	fe_status_t status;
-	u8 mlpf, mlpf_new, mlpf_max, mlpf_min, nlpf, div4;
-	s32 offset_khz;
-	u16 value, ndiv;
-	u32 f3db;
-
-	dprintk("%s() ", __func__);
-
-	if (state->config->set_ts_params)
-		state->config->set_ts_params(fe, 0);
-	/* Tune */
-	/* unknown */
-	ds3000_tuner_writereg(state, 0x07, 0x02);
-	ds3000_tuner_writereg(state, 0x10, 0x00);
-	ds3000_tuner_writereg(state, 0x60, 0x79);
-	ds3000_tuner_writereg(state, 0x08, 0x01);
-	ds3000_tuner_writereg(state, 0x00, 0x01);
-	div4 = 0;
-
-	/* calculate and set freq divider */
-	if (c->frequency < 1146000) {
-		ds3000_tuner_writereg(state, 0x10, 0x11);
-		div4 = 1;
-		ndiv = ((c->frequency * (6 + 8) * 4) +
-				(DS3000_XTAL_FREQ / 2)) /
-				DS3000_XTAL_FREQ - 1024;
-	} else {
-		ds3000_tuner_writereg(state, 0x10, 0x01);
-		ndiv = ((c->frequency * (6 + 8) * 2) +
-				(DS3000_XTAL_FREQ / 2)) /
-				DS3000_XTAL_FREQ - 1024;
-	}
-
-	ds3000_tuner_writereg(state, 0x01, (ndiv & 0x0f00) >> 8);
-	ds3000_tuner_writereg(state, 0x02, ndiv & 0x00ff);
-
-	/* set pll */
-	ds3000_tuner_writereg(state, 0x03, 0x06);
-	ds3000_tuner_writereg(state, 0x51, 0x0f);
-	ds3000_tuner_writereg(state, 0x51, 0x1f);
-	ds3000_tuner_writereg(state, 0x50, 0x10);
-	ds3000_tuner_writereg(state, 0x50, 0x00);
-	msleep(5);
-
-	/* unknown */
-	ds3000_tuner_writereg(state, 0x51, 0x17);
-	ds3000_tuner_writereg(state, 0x51, 0x1f);
-	ds3000_tuner_writereg(state, 0x50, 0x08);
-	ds3000_tuner_writereg(state, 0x50, 0x00);
-	msleep(5);
-
-	value = ds3000_tuner_readreg(state, 0x3d);
-	value &= 0x0f;
-	if ((value > 4) && (value < 15)) {
-		value -= 3;
-		if (value < 4)
-			value = 4;
-		value = ((value << 3) | 0x01) & 0x79;
-	}
-
-	ds3000_tuner_writereg(state, 0x60, value);
-	ds3000_tuner_writereg(state, 0x51, 0x17);
-	ds3000_tuner_writereg(state, 0x51, 0x1f);
-	ds3000_tuner_writereg(state, 0x50, 0x08);
-	ds3000_tuner_writereg(state, 0x50, 0x00);
-
-	/* set low-pass filter period */
-	ds3000_tuner_writereg(state, 0x04, 0x2e);
-	ds3000_tuner_writereg(state, 0x51, 0x1b);
-	ds3000_tuner_writereg(state, 0x51, 0x1f);
-	ds3000_tuner_writereg(state, 0x50, 0x04);
-	ds3000_tuner_writereg(state, 0x50, 0x00);
-	msleep(5);
-
-	f3db = ((c->symbol_rate / 1000) << 2) / 5 + 2000;
-	if ((c->symbol_rate / 1000) < 5000)
-		f3db += 3000;
-	if (f3db < 7000)
-		f3db = 7000;
-	if (f3db > 40000)
-		f3db = 40000;
-
-	/* set low-pass filter baseband */
-	value = ds3000_tuner_readreg(state, 0x26);
-	mlpf = 0x2e * 207 / ((value << 1) + 151);
-	mlpf_max = mlpf * 135 / 100;
-	mlpf_min = mlpf * 78 / 100;
-	if (mlpf_max > 63)
-		mlpf_max = 63;
-
-	/* rounded to the closest integer */
-	nlpf = ((mlpf * f3db * 1000) + (2766 * DS3000_XTAL_FREQ / 2))
-			/ (2766 * DS3000_XTAL_FREQ);
-	if (nlpf > 23)
-		nlpf = 23;
-	if (nlpf < 1)
-		nlpf = 1;
-
-	/* rounded to the closest integer */
-	mlpf_new = ((DS3000_XTAL_FREQ * nlpf * 2766) +
-			(1000 * f3db / 2)) / (1000 * f3db);
-
-	if (mlpf_new < mlpf_min) {
-		nlpf++;
-		mlpf_new = ((DS3000_XTAL_FREQ * nlpf * 2766) +
-				(1000 * f3db / 2)) / (1000 * f3db);
-	}
-
-	if (mlpf_new > mlpf_max)
-		mlpf_new = mlpf_max;
-
-	ds3000_tuner_writereg(state, 0x04, mlpf_new);
-	ds3000_tuner_writereg(state, 0x06, nlpf);
-	ds3000_tuner_writereg(state, 0x51, 0x1b);
-	ds3000_tuner_writereg(state, 0x51, 0x1f);
-	ds3000_tuner_writereg(state, 0x50, 0x04);
-	ds3000_tuner_writereg(state, 0x50, 0x00);
-	msleep(5);
-
-	/* unknown */
-	ds3000_tuner_writereg(state, 0x51, 0x1e);
-	ds3000_tuner_writereg(state, 0x51, 0x1f);
-	ds3000_tuner_writereg(state, 0x50, 0x01);
-	ds3000_tuner_writereg(state, 0x50, 0x00);
-	msleep(60);
-
-	offset_khz = (ndiv - ndiv % 2 + 1024) * DS3000_XTAL_FREQ
-		/ (6 + 8) / (div4 + 1) / 2 - c->frequency;
-
-	/* ds3000 global reset */
-	ds3000_writereg(state, 0x07, 0x80);
-	ds3000_writereg(state, 0x07, 0x00);
-	/* ds3000 build-in uC reset */
-	ds3000_writereg(state, 0xb2, 0x01);
-	/* ds3000 software reset */
-	ds3000_writereg(state, 0x00, 0x01);
-
-	switch (c->delivery_system) {
-	case SYS_DVBS:
-		/* initialise the demod in DVB-S mode */
-		for (i = 0; i < sizeof(ds3000_dvbs_init_tab); i += 2)
-			ds3000_writereg(state,
-				ds3000_dvbs_init_tab[i],
-				ds3000_dvbs_init_tab[i + 1]);
-		value = ds3000_readreg(state, 0xfe);
-		value &= 0xc0;
-		value |= 0x1b;
-		ds3000_writereg(state, 0xfe, value);
-		break;
-	case SYS_DVBS2:
-		/* initialise the demod in DVB-S2 mode */
-		for (i = 0; i < sizeof(ds3000_dvbs2_init_tab); i += 2)
-			ds3000_writereg(state,
-				ds3000_dvbs2_init_tab[i],
-				ds3000_dvbs2_init_tab[i + 1]);
-		if (c->symbol_rate >= 30000000)
-			ds3000_writereg(state, 0xfe, 0x54);
-		else
-			ds3000_writereg(state, 0xfe, 0x98);
-		break;
-	default:
-		return 1;
-	}
-
-	/* enable 27MHz clock output */
-	ds3000_writereg(state, 0x29, 0x80);
-	/* enable ac coupling */
-	ds3000_writereg(state, 0x25, 0x8a);
-
-	/* enhance symbol rate performance */
-	if ((c->symbol_rate / 1000) <= 5000) {
-		value = 29777 / (c->symbol_rate / 1000) + 1;
-		if (value % 2 != 0)
-			value++;
-		ds3000_writereg(state, 0xc3, 0x0d);
-		ds3000_writereg(state, 0xc8, value);
-		ds3000_writereg(state, 0xc4, 0x10);
-		ds3000_writereg(state, 0xc7, 0x0e);
-	} else if ((c->symbol_rate / 1000) <= 10000) {
-		value = 92166 / (c->symbol_rate / 1000) + 1;
-		if (value % 2 != 0)
-			value++;
-		ds3000_writereg(state, 0xc3, 0x07);
-		ds3000_writereg(state, 0xc8, value);
-		ds3000_writereg(state, 0xc4, 0x09);
-		ds3000_writereg(state, 0xc7, 0x12);
-	} else if ((c->symbol_rate / 1000) <= 20000) {
-		value = 64516 / (c->symbol_rate / 1000) + 1;
-		ds3000_writereg(state, 0xc3, value);
-		ds3000_writereg(state, 0xc8, 0x0e);
-		ds3000_writereg(state, 0xc4, 0x07);
-		ds3000_writereg(state, 0xc7, 0x18);
-	} else {
-		value = 129032 / (c->symbol_rate / 1000) + 1;
-		ds3000_writereg(state, 0xc3, value);
-		ds3000_writereg(state, 0xc8, 0x0a);
-		ds3000_writereg(state, 0xc4, 0x05);
-		ds3000_writereg(state, 0xc7, 0x24);
-	}
-
-	/* normalized symbol rate rounded to the closest integer */
-	value = (((c->symbol_rate / 1000) << 16) +
-			(DS3000_SAMPLE_RATE / 2)) / DS3000_SAMPLE_RATE;
-	ds3000_writereg(state, 0x61, value & 0x00ff);
-	ds3000_writereg(state, 0x62, (value & 0xff00) >> 8);
-
-	/* co-channel interference cancellation disabled */
-	ds3000_writereg(state, 0x56, 0x00);
-
-	/* equalizer disabled */
-	ds3000_writereg(state, 0x76, 0x00);
-
-	/*ds3000_writereg(state, 0x08, 0x03);
-	ds3000_writereg(state, 0xfd, 0x22);
-	ds3000_writereg(state, 0x08, 0x07);
-	ds3000_writereg(state, 0xfd, 0x42);
-	ds3000_writereg(state, 0x08, 0x07);*/
-
-	if (state->config->ci_mode) {
-		switch (c->delivery_system) {
-		case SYS_DVBS:
-		default:
-			ds3000_writereg(state, 0xfd, 0x80);
-		break;
-		case SYS_DVBS2:
-			ds3000_writereg(state, 0xfd, 0x01);
-			break;
-		}
-	}
-
-	/* ds3000 out of software reset */
-	ds3000_writereg(state, 0x00, 0x00);
-	/* start ds3000 build-in uC */
-	ds3000_writereg(state, 0xb2, 0x00);
-
-	ds3000_set_carrier_offset(fe, offset_khz);
-
-	for (i = 0; i < 30 ; i++) {
-		ds3000_read_status(fe, &status);
-		if (status & FE_HAS_LOCK)
-			break;
-
-		msleep(10);
-	}
-
-	return 0;
-}
-
-static int ds3000_tune(struct dvb_frontend *fe,
-			bool re_tune,
-			unsigned int mode_flags,
-			unsigned int *delay,
-			fe_status_t *status)
-{
-	if (re_tune) {
-		int ret = ds3000_set_frontend(fe);
-		if (ret)
-			return ret;
-	}
-
-	*delay = HZ / 5;
-
-	return ds3000_read_status(fe, status);
-}
-
-static enum dvbfe_algo ds3000_get_algo(struct dvb_frontend *fe)
-{
-	dprintk("%s()\n", __func__);
-	return DVBFE_ALGO_HW;
-}
-
-/*
- * Initialise or wake up device
- *
- * Power config will reset and load initial firmware if required
- */
-static int ds3000_initfe(struct dvb_frontend *fe)
-{
-	struct ds3000_state *state = fe->demodulator_priv;
-	int ret;
-
-	dprintk("%s()\n", __func__);
-	/* hard reset */
-	ds3000_writereg(state, 0x08, 0x01 | ds3000_readreg(state, 0x08));
-	msleep(1);
-
-	/* TS2020 init */
-	ds3000_tuner_writereg(state, 0x42, 0x73);
-	ds3000_tuner_writereg(state, 0x05, 0x01);
-	ds3000_tuner_writereg(state, 0x62, 0xf5);
-	/* Load the firmware if required */
-	ret = ds3000_firmware_ondemand(fe);
-	if (ret != 0) {
-		printk(KERN_ERR "%s: Unable initialize firmware\n", __func__);
-		return ret;
-	}
-
-	return 0;
-}
-
-/* Put device to sleep */
-static int ds3000_sleep(struct dvb_frontend *fe)
-{
-	dprintk("%s()\n", __func__);
-	return 0;
-}
-
-static struct dvb_frontend_ops ds3000_ops = {
-	.delsys = { SYS_DVBS, SYS_DVBS2},
-	.info = {
-		.name = "Montage Technology DS3000/TS2020",
-		.frequency_min = 950000,
-		.frequency_max = 2150000,
-		.frequency_stepsize = 1011, /* kHz for QPSK frontends */
-		.frequency_tolerance = 5000,
-		.symbol_rate_min = 1000000,
-		.symbol_rate_max = 45000000,
-		.caps = FE_CAN_INVERSION_AUTO |
-			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
-			FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_2G_MODULATION |
-			FE_CAN_QPSK | FE_CAN_RECOVER
-	},
-
-	.release = ds3000_release,
-
-	.init = ds3000_initfe,
-	.sleep = ds3000_sleep,
-	.read_status = ds3000_read_status,
-	.read_ber = ds3000_read_ber,
-	.read_signal_strength = ds3000_read_signal_strength,
-	.read_snr = ds3000_read_snr,
-	.read_ucblocks = ds3000_read_ucblocks,
-	.set_voltage = ds3000_set_voltage,
-	.set_tone = ds3000_set_tone,
-	.diseqc_send_master_cmd = ds3000_send_diseqc_msg,
-	.diseqc_send_burst = ds3000_diseqc_send_burst,
-	.get_frontend_algo = ds3000_get_algo,
-
-	.set_frontend = ds3000_set_frontend,
-	.tune = ds3000_tune,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
-
-MODULE_DESCRIPTION("DVB Frontend module for Montage Technology "
-			"DS3000/TS2020 hardware");
-MODULE_AUTHOR("Konstantin Dimitrov");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/ds3000.h b/drivers/media/dvb/frontends/ds3000.h
deleted file mode 100644
index 1b73688..0000000
--- a/drivers/media/dvb/frontends/ds3000.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
-    Montage Technology DS3000/TS2020 - DVBS/S2 Satellite demod/tuner driver
-    Copyright (C) 2009 Konstantin Dimitrov <kosio.dimitrov@gmail.com>
-
-    Copyright (C) 2009 TurboSight.com
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef DS3000_H
-#define DS3000_H
-
-#include <linux/dvb/frontend.h>
-
-struct ds3000_config {
-	/* the demodulator's i2c address */
-	u8 demod_address;
-	u8 ci_mode;
-	/* Set device param to start dma */
-	int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured);
-};
-
-#if defined(CONFIG_DVB_DS3000) || \
-			(defined(CONFIG_DVB_DS3000_MODULE) && defined(MODULE))
-extern struct dvb_frontend *ds3000_attach(const struct ds3000_config *config,
-					struct i2c_adapter *i2c);
-#else
-static inline
-struct dvb_frontend *ds3000_attach(const struct ds3000_config *config,
-					struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_DS3000 */
-#endif /* DS3000_H */
diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c
deleted file mode 100644
index 1ab3483..0000000
--- a/drivers/media/dvb/frontends/dvb-pll.c
+++ /dev/null
@@ -1,794 +0,0 @@
-/*
- * descriptions + helper functions for simple dvb plls.
- *
- * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/dvb/frontend.h>
-#include <asm/types.h>
-
-#include "dvb-pll.h"
-
-struct dvb_pll_priv {
-	/* pll number */
-	int nr;
-
-	/* i2c details */
-	int pll_i2c_address;
-	struct i2c_adapter *i2c;
-
-	/* the PLL descriptor */
-	struct dvb_pll_desc *pll_desc;
-
-	/* cached frequency/bandwidth */
-	u32 frequency;
-	u32 bandwidth;
-};
-
-#define DVB_PLL_MAX 64
-
-static unsigned int dvb_pll_devcount;
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "enable verbose debug messages");
-
-static unsigned int id[DVB_PLL_MAX] =
-	{ [ 0 ... (DVB_PLL_MAX-1) ] = DVB_PLL_UNDEFINED };
-module_param_array(id, int, NULL, 0644);
-MODULE_PARM_DESC(id, "force pll id to use (DEBUG ONLY)");
-
-/* ----------------------------------------------------------- */
-
-struct dvb_pll_desc {
-	char *name;
-	u32  min;
-	u32  max;
-	u32  iffreq;
-	void (*set)(struct dvb_frontend *fe, u8 *buf);
-	u8   *initdata;
-	u8   *initdata2;
-	u8   *sleepdata;
-	int  count;
-	struct {
-		u32 limit;
-		u32 stepsize;
-		u8  config;
-		u8  cb;
-	} entries[12];
-};
-
-/* ----------------------------------------------------------- */
-/* descriptions                                                */
-
-static struct dvb_pll_desc dvb_pll_thomson_dtt7579 = {
-	.name  = "Thomson dtt7579",
-	.min   = 177000000,
-	.max   = 858000000,
-	.iffreq= 36166667,
-	.sleepdata = (u8[]){ 2, 0xb4, 0x03 },
-	.count = 4,
-	.entries = {
-		{  443250000, 166667, 0xb4, 0x02 },
-		{  542000000, 166667, 0xb4, 0x08 },
-		{  771000000, 166667, 0xbc, 0x08 },
-		{  999999999, 166667, 0xf4, 0x08 },
-	},
-};
-
-static void thomson_dtt759x_bw(struct dvb_frontend *fe, u8 *buf)
-{
-	u32 bw = fe->dtv_property_cache.bandwidth_hz;
-	if (bw == 7000000)
-		buf[3] |= 0x10;
-}
-
-static struct dvb_pll_desc dvb_pll_thomson_dtt759x = {
-	.name  = "Thomson dtt759x",
-	.min   = 177000000,
-	.max   = 896000000,
-	.set   = thomson_dtt759x_bw,
-	.iffreq= 36166667,
-	.sleepdata = (u8[]){ 2, 0x84, 0x03 },
-	.count = 5,
-	.entries = {
-		{  264000000, 166667, 0xb4, 0x02 },
-		{  470000000, 166667, 0xbc, 0x02 },
-		{  735000000, 166667, 0xbc, 0x08 },
-		{  835000000, 166667, 0xf4, 0x08 },
-		{  999999999, 166667, 0xfc, 0x08 },
-	},
-};
-
-static struct dvb_pll_desc dvb_pll_lg_z201 = {
-	.name  = "LG z201",
-	.min   = 174000000,
-	.max   = 862000000,
-	.iffreq= 36166667,
-	.sleepdata = (u8[]){ 2, 0xbc, 0x03 },
-	.count = 5,
-	.entries = {
-		{  157500000, 166667, 0xbc, 0x01 },
-		{  443250000, 166667, 0xbc, 0x02 },
-		{  542000000, 166667, 0xbc, 0x04 },
-		{  830000000, 166667, 0xf4, 0x04 },
-		{  999999999, 166667, 0xfc, 0x04 },
-	},
-};
-
-static struct dvb_pll_desc dvb_pll_unknown_1 = {
-	.name  = "unknown 1", /* used by dntv live dvb-t */
-	.min   = 174000000,
-	.max   = 862000000,
-	.iffreq= 36166667,
-	.count = 9,
-	.entries = {
-		{  150000000, 166667, 0xb4, 0x01 },
-		{  173000000, 166667, 0xbc, 0x01 },
-		{  250000000, 166667, 0xb4, 0x02 },
-		{  400000000, 166667, 0xbc, 0x02 },
-		{  420000000, 166667, 0xf4, 0x02 },
-		{  470000000, 166667, 0xfc, 0x02 },
-		{  600000000, 166667, 0xbc, 0x08 },
-		{  730000000, 166667, 0xf4, 0x08 },
-		{  999999999, 166667, 0xfc, 0x08 },
-	},
-};
-
-/* Infineon TUA6010XS
- * used in Thomson Cable Tuner
- */
-static struct dvb_pll_desc dvb_pll_tua6010xs = {
-	.name  = "Infineon TUA6010XS",
-	.min   =  44250000,
-	.max   = 858000000,
-	.iffreq= 36125000,
-	.count = 3,
-	.entries = {
-		{  115750000, 62500, 0x8e, 0x03 },
-		{  403250000, 62500, 0x8e, 0x06 },
-		{  999999999, 62500, 0x8e, 0x85 },
-	},
-};
-
-/* Panasonic env57h1xd5 (some Philips PLL ?) */
-static struct dvb_pll_desc dvb_pll_env57h1xd5 = {
-	.name  = "Panasonic ENV57H1XD5",
-	.min   =  44250000,
-	.max   = 858000000,
-	.iffreq= 36125000,
-	.count = 4,
-	.entries = {
-		{  153000000, 166667, 0xc2, 0x41 },
-		{  470000000, 166667, 0xc2, 0x42 },
-		{  526000000, 166667, 0xc2, 0x84 },
-		{  999999999, 166667, 0xc2, 0xa4 },
-	},
-};
-
-/* Philips TDA6650/TDA6651
- * used in Panasonic ENV77H11D5
- */
-static void tda665x_bw(struct dvb_frontend *fe, u8 *buf)
-{
-	u32 bw = fe->dtv_property_cache.bandwidth_hz;
-	if (bw == 8000000)
-		buf[3] |= 0x08;
-}
-
-static struct dvb_pll_desc dvb_pll_tda665x = {
-	.name  = "Philips TDA6650/TDA6651",
-	.min   =  44250000,
-	.max   = 858000000,
-	.set   = tda665x_bw,
-	.iffreq= 36166667,
-	.initdata = (u8[]){ 4, 0x0b, 0xf5, 0x85, 0xab },
-	.count = 12,
-	.entries = {
-		{   93834000, 166667, 0xca, 0x61 /* 011 0 0 0  01 */ },
-		{  123834000, 166667, 0xca, 0xa1 /* 101 0 0 0  01 */ },
-		{  161000000, 166667, 0xca, 0xa1 /* 101 0 0 0  01 */ },
-		{  163834000, 166667, 0xca, 0xc2 /* 110 0 0 0  10 */ },
-		{  253834000, 166667, 0xca, 0x62 /* 011 0 0 0  10 */ },
-		{  383834000, 166667, 0xca, 0xa2 /* 101 0 0 0  10 */ },
-		{  443834000, 166667, 0xca, 0xc2 /* 110 0 0 0  10 */ },
-		{  444000000, 166667, 0xca, 0xc4 /* 110 0 0 1  00 */ },
-		{  583834000, 166667, 0xca, 0x64 /* 011 0 0 1  00 */ },
-		{  793834000, 166667, 0xca, 0xa4 /* 101 0 0 1  00 */ },
-		{  444834000, 166667, 0xca, 0xc4 /* 110 0 0 1  00 */ },
-		{  861000000, 166667, 0xca, 0xe4 /* 111 0 0 1  00 */ },
-	}
-};
-
-/* Infineon TUA6034
- * used in LG TDTP E102P
- */
-static void tua6034_bw(struct dvb_frontend *fe, u8 *buf)
-{
-	u32 bw = fe->dtv_property_cache.bandwidth_hz;
-	if (bw == 7000000)
-		buf[3] |= 0x08;
-}
-
-static struct dvb_pll_desc dvb_pll_tua6034 = {
-	.name  = "Infineon TUA6034",
-	.min   =  44250000,
-	.max   = 858000000,
-	.iffreq= 36166667,
-	.count = 3,
-	.set   = tua6034_bw,
-	.entries = {
-		{  174500000, 62500, 0xce, 0x01 },
-		{  230000000, 62500, 0xce, 0x02 },
-		{  999999999, 62500, 0xce, 0x04 },
-	},
-};
-
-/* ALPS TDED4
- * used in Nebula-Cards and USB boxes
- */
-static void tded4_bw(struct dvb_frontend *fe, u8 *buf)
-{
-	u32 bw = fe->dtv_property_cache.bandwidth_hz;
-	if (bw == 8000000)
-		buf[3] |= 0x04;
-}
-
-static struct dvb_pll_desc dvb_pll_tded4 = {
-	.name = "ALPS TDED4",
-	.min = 47000000,
-	.max = 863000000,
-	.iffreq= 36166667,
-	.set   = tded4_bw,
-	.count = 4,
-	.entries = {
-		{ 153000000, 166667, 0x85, 0x01 },
-		{ 470000000, 166667, 0x85, 0x02 },
-		{ 823000000, 166667, 0x85, 0x08 },
-		{ 999999999, 166667, 0x85, 0x88 },
-	}
-};
-
-/* ALPS TDHU2
- * used in AverTVHD MCE A180
- */
-static struct dvb_pll_desc dvb_pll_tdhu2 = {
-	.name = "ALPS TDHU2",
-	.min = 54000000,
-	.max = 864000000,
-	.iffreq= 44000000,
-	.count = 4,
-	.entries = {
-		{ 162000000, 62500, 0x85, 0x01 },
-		{ 426000000, 62500, 0x85, 0x02 },
-		{ 782000000, 62500, 0x85, 0x08 },
-		{ 999999999, 62500, 0x85, 0x88 },
-	}
-};
-
-/* Samsung TBMV30111IN / TBMV30712IN1
- * used in Air2PC ATSC - 2nd generation (nxt2002)
- */
-static struct dvb_pll_desc dvb_pll_samsung_tbmv = {
-	.name = "Samsung TBMV30111IN / TBMV30712IN1",
-	.min = 54000000,
-	.max = 860000000,
-	.iffreq= 44000000,
-	.count = 6,
-	.entries = {
-		{ 172000000, 166667, 0xb4, 0x01 },
-		{ 214000000, 166667, 0xb4, 0x02 },
-		{ 467000000, 166667, 0xbc, 0x02 },
-		{ 721000000, 166667, 0xbc, 0x08 },
-		{ 841000000, 166667, 0xf4, 0x08 },
-		{ 999999999, 166667, 0xfc, 0x02 },
-	}
-};
-
-/*
- * Philips SD1878 Tuner.
- */
-static struct dvb_pll_desc dvb_pll_philips_sd1878_tda8261 = {
-	.name  = "Philips SD1878",
-	.min   =  950000,
-	.max   = 2150000,
-	.iffreq= 249, /* zero-IF, offset 249 is to round up */
-	.count = 4,
-	.entries = {
-		{ 1250000, 500, 0xc4, 0x00},
-		{ 1450000, 500, 0xc4, 0x40},
-		{ 2050000, 500, 0xc4, 0x80},
-		{ 2150000, 500, 0xc4, 0xc0},
-	},
-};
-
-static void opera1_bw(struct dvb_frontend *fe, u8 *buf)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct dvb_pll_priv *priv = fe->tuner_priv;
-	u32 b_w  = (c->symbol_rate * 27) / 32000;
-	struct i2c_msg msg = {
-		.addr = priv->pll_i2c_address,
-		.flags = 0,
-		.buf = buf,
-		.len = 4
-	};
-	int result;
-	u8 lpf;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	result = i2c_transfer(priv->i2c, &msg, 1);
-	if (result != 1)
-		printk(KERN_ERR "%s: i2c_transfer failed:%d",
-			__func__, result);
-
-	if (b_w <= 10000)
-		lpf = 0xc;
-	else if (b_w <= 12000)
-		lpf = 0x2;
-	else if (b_w <= 14000)
-		lpf = 0xa;
-	else if (b_w <= 16000)
-		lpf = 0x6;
-	else if (b_w <= 18000)
-		lpf = 0xe;
-	else if (b_w <= 20000)
-		lpf = 0x1;
-	else if (b_w <= 22000)
-		lpf = 0x9;
-	else if (b_w <= 24000)
-		lpf = 0x5;
-	else if (b_w <= 26000)
-		lpf = 0xd;
-	else if (b_w <= 28000)
-		lpf = 0x3;
-		else
-		lpf = 0xb;
-	buf[2] ^= 0x1c; /* Flip bits 3-5 */
-	/* Set lpf */
-	buf[2] |= ((lpf >> 2) & 0x3) << 3;
-	buf[3] |= (lpf & 0x3) << 2;
-
-	return;
-}
-
-static struct dvb_pll_desc dvb_pll_opera1 = {
-	.name  = "Opera Tuner",
-	.min   =  900000,
-	.max   = 2250000,
-	.initdata = (u8[]){ 4, 0x08, 0xe5, 0xe1, 0x00 },
-	.initdata2 = (u8[]){ 4, 0x08, 0xe5, 0xe5, 0x00 },
-	.iffreq= 0,
-	.set   = opera1_bw,
-	.count = 8,
-	.entries = {
-		{ 1064000, 500, 0xf9, 0xc2 },
-		{ 1169000, 500, 0xf9, 0xe2 },
-		{ 1299000, 500, 0xf9, 0x20 },
-		{ 1444000, 500, 0xf9, 0x40 },
-		{ 1606000, 500, 0xf9, 0x60 },
-		{ 1777000, 500, 0xf9, 0x80 },
-		{ 1941000, 500, 0xf9, 0xa0 },
-		{ 2250000, 500, 0xf9, 0xc0 },
-	}
-};
-
-static void samsung_dtos403ih102a_set(struct dvb_frontend *fe, u8 *buf)
-{
-	struct dvb_pll_priv *priv = fe->tuner_priv;
-	struct i2c_msg msg = {
-		.addr = priv->pll_i2c_address,
-		.flags = 0,
-		.buf = buf,
-		.len = 4
-	};
-	int result;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	result = i2c_transfer(priv->i2c, &msg, 1);
-	if (result != 1)
-		printk(KERN_ERR "%s: i2c_transfer failed:%d",
-			__func__, result);
-
-	buf[2] = 0x9e;
-	buf[3] = 0x90;
-
-	return;
-}
-
-/* unknown pll used in Samsung DTOS403IH102A DVB-C tuner */
-static struct dvb_pll_desc dvb_pll_samsung_dtos403ih102a = {
-	.name   = "Samsung DTOS403IH102A",
-	.min    =  44250000,
-	.max    = 858000000,
-	.iffreq =  36125000,
-	.count  = 8,
-	.set    = samsung_dtos403ih102a_set,
-	.entries = {
-		{ 135000000, 62500, 0xbe, 0x01 },
-		{ 177000000, 62500, 0xf6, 0x01 },
-		{ 370000000, 62500, 0xbe, 0x02 },
-		{ 450000000, 62500, 0xf6, 0x02 },
-		{ 466000000, 62500, 0xfe, 0x02 },
-		{ 538000000, 62500, 0xbe, 0x08 },
-		{ 826000000, 62500, 0xf6, 0x08 },
-		{ 999999999, 62500, 0xfe, 0x08 },
-	}
-};
-
-/* Samsung TDTC9251DH0 DVB-T NIM, as used on AirStar 2 */
-static struct dvb_pll_desc dvb_pll_samsung_tdtc9251dh0 = {
-	.name	= "Samsung TDTC9251DH0",
-	.min	=  48000000,
-	.max	= 863000000,
-	.iffreq	=  36166667,
-	.count	= 3,
-	.entries = {
-		{ 157500000, 166667, 0xcc, 0x09 },
-		{ 443000000, 166667, 0xcc, 0x0a },
-		{ 863000000, 166667, 0xcc, 0x08 },
-	}
-};
-
-/* Samsung TBDU18132 DVB-S NIM with TSA5059 PLL, used in SkyStar2 DVB-S 2.3 */
-static struct dvb_pll_desc dvb_pll_samsung_tbdu18132 = {
-	.name = "Samsung TBDU18132",
-	.min	=  950000,
-	.max	= 2150000, /* guesses */
-	.iffreq = 0,
-	.count = 2,
-	.entries = {
-		{ 1550000, 125, 0x84, 0x82 },
-		{ 4095937, 125, 0x84, 0x80 },
-	}
-	/* TSA5059 PLL has a 17 bit divisor rather than the 15 bits supported
-	 * by this driver.  The two extra bits are 0x60 in the third byte.  15
-	 * bits is enough for over 4 GHz, which is enough to cover the range
-	 * of this tuner.  We could use the additional divisor bits by adding
-	 * more entries, e.g.
-	 { 0x0ffff * 125 + 125/2, 125, 0x84 | 0x20, },
-	 { 0x17fff * 125 + 125/2, 125, 0x84 | 0x40, },
-	 { 0x1ffff * 125 + 125/2, 125, 0x84 | 0x60, }, */
-};
-
-/* Samsung TBMU24112 DVB-S NIM with SL1935 zero-IF tuner */
-static struct dvb_pll_desc dvb_pll_samsung_tbmu24112 = {
-	.name = "Samsung TBMU24112",
-	.min	=  950000,
-	.max	= 2150000, /* guesses */
-	.iffreq = 0,
-	.count = 2,
-	.entries = {
-		{ 1500000, 125, 0x84, 0x18 },
-		{ 9999999, 125, 0x84, 0x08 },
-	}
-};
-
-/* Alps TDEE4 DVB-C NIM, used on Cablestar 2 */
-/* byte 4 : 1  *   *   AGD R3  R2  R1  R0
- * byte 5 : C1 *   RE  RTS BS4 BS3 BS2 BS1
- * AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95
- * Range(MHz)  C1 *  RE RTS BS4 BS3 BS2 BS1  Byte 5
- *  47 - 153   0  *  0   0   0   0   0   1   0x01
- * 153 - 430   0  *  0   0   0   0   1   0   0x02
- * 430 - 822   0  *  0   0   1   0   0   0   0x08
- * 822 - 862   1  *  0   0   1   0   0   0   0x88 */
-static struct dvb_pll_desc dvb_pll_alps_tdee4 = {
-	.name = "ALPS TDEE4",
-	.min	=  47000000,
-	.max	= 862000000,
-	.iffreq	=  36125000,
-	.count = 4,
-	.entries = {
-		{ 153000000, 62500, 0x95, 0x01 },
-		{ 430000000, 62500, 0x95, 0x02 },
-		{ 822000000, 62500, 0x95, 0x08 },
-		{ 999999999, 62500, 0x95, 0x88 },
-	}
-};
-
-/* ----------------------------------------------------------- */
-
-static struct dvb_pll_desc *pll_list[] = {
-	[DVB_PLL_UNDEFINED]              = NULL,
-	[DVB_PLL_THOMSON_DTT7579]        = &dvb_pll_thomson_dtt7579,
-	[DVB_PLL_THOMSON_DTT759X]        = &dvb_pll_thomson_dtt759x,
-	[DVB_PLL_LG_Z201]                = &dvb_pll_lg_z201,
-	[DVB_PLL_UNKNOWN_1]              = &dvb_pll_unknown_1,
-	[DVB_PLL_TUA6010XS]              = &dvb_pll_tua6010xs,
-	[DVB_PLL_ENV57H1XD5]             = &dvb_pll_env57h1xd5,
-	[DVB_PLL_TUA6034]                = &dvb_pll_tua6034,
-	[DVB_PLL_TDA665X]                = &dvb_pll_tda665x,
-	[DVB_PLL_TDED4]                  = &dvb_pll_tded4,
-	[DVB_PLL_TDEE4]                  = &dvb_pll_alps_tdee4,
-	[DVB_PLL_TDHU2]                  = &dvb_pll_tdhu2,
-	[DVB_PLL_SAMSUNG_TBMV]           = &dvb_pll_samsung_tbmv,
-	[DVB_PLL_PHILIPS_SD1878_TDA8261] = &dvb_pll_philips_sd1878_tda8261,
-	[DVB_PLL_OPERA1]                 = &dvb_pll_opera1,
-	[DVB_PLL_SAMSUNG_DTOS403IH102A]  = &dvb_pll_samsung_dtos403ih102a,
-	[DVB_PLL_SAMSUNG_TDTC9251DH0]    = &dvb_pll_samsung_tdtc9251dh0,
-	[DVB_PLL_SAMSUNG_TBDU18132]	 = &dvb_pll_samsung_tbdu18132,
-	[DVB_PLL_SAMSUNG_TBMU24112]      = &dvb_pll_samsung_tbmu24112,
-};
-
-/* ----------------------------------------------------------- */
-/* code                                                        */
-
-static int dvb_pll_configure(struct dvb_frontend *fe, u8 *buf,
-			     const u32 frequency)
-{
-	struct dvb_pll_priv *priv = fe->tuner_priv;
-	struct dvb_pll_desc *desc = priv->pll_desc;
-	u32 div;
-	int i;
-
-	if (frequency && (frequency < desc->min || frequency > desc->max))
-		return -EINVAL;
-
-	for (i = 0; i < desc->count; i++) {
-		if (frequency > desc->entries[i].limit)
-			continue;
-		break;
-	}
-
-	if (debug)
-		printk("pll: %s: freq=%d | i=%d/%d\n", desc->name,
-		       frequency, i, desc->count);
-	if (i == desc->count)
-		return -EINVAL;
-
-	div = (frequency + desc->iffreq +
-	       desc->entries[i].stepsize/2) / desc->entries[i].stepsize;
-	buf[0] = div >> 8;
-	buf[1] = div & 0xff;
-	buf[2] = desc->entries[i].config;
-	buf[3] = desc->entries[i].cb;
-
-	if (desc->set)
-		desc->set(fe, buf);
-
-	if (debug)
-		printk("pll: %s: div=%d | buf=0x%02x,0x%02x,0x%02x,0x%02x\n",
-		       desc->name, div, buf[0], buf[1], buf[2], buf[3]);
-
-	// calculate the frequency we set it to
-	return (div * desc->entries[i].stepsize) - desc->iffreq;
-}
-
-static int dvb_pll_release(struct dvb_frontend *fe)
-{
-	kfree(fe->tuner_priv);
-	fe->tuner_priv = NULL;
-	return 0;
-}
-
-static int dvb_pll_sleep(struct dvb_frontend *fe)
-{
-	struct dvb_pll_priv *priv = fe->tuner_priv;
-
-	if (priv->i2c == NULL)
-		return -EINVAL;
-
-	if (priv->pll_desc->sleepdata) {
-		struct i2c_msg msg = { .flags = 0,
-			.addr = priv->pll_i2c_address,
-			.buf = priv->pll_desc->sleepdata + 1,
-			.len = priv->pll_desc->sleepdata[0] };
-
-		int result;
-
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 1);
-		if ((result = i2c_transfer(priv->i2c, &msg, 1)) != 1) {
-			return result;
-		}
-		return 0;
-	}
-	/* Shouldn't be called when initdata is NULL, maybe BUG()? */
-	return -EINVAL;
-}
-
-static int dvb_pll_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct dvb_pll_priv *priv = fe->tuner_priv;
-	u8 buf[4];
-	struct i2c_msg msg =
-		{ .addr = priv->pll_i2c_address, .flags = 0,
-		  .buf = buf, .len = sizeof(buf) };
-	int result;
-	u32 frequency = 0;
-
-	if (priv->i2c == NULL)
-		return -EINVAL;
-
-	result = dvb_pll_configure(fe, buf, c->frequency);
-	if (result < 0)
-		return result;
-	else
-		frequency = result;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if ((result = i2c_transfer(priv->i2c, &msg, 1)) != 1) {
-		return result;
-	}
-
-	priv->frequency = frequency;
-	priv->bandwidth = c->bandwidth_hz;
-
-	return 0;
-}
-
-static int dvb_pll_calc_regs(struct dvb_frontend *fe,
-			     u8 *buf, int buf_len)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct dvb_pll_priv *priv = fe->tuner_priv;
-	int result;
-	u32 frequency = 0;
-
-	if (buf_len < 5)
-		return -EINVAL;
-
-	result = dvb_pll_configure(fe, buf + 1, c->frequency);
-	if (result < 0)
-		return result;
-	else
-		frequency = result;
-
-	buf[0] = priv->pll_i2c_address;
-
-	priv->frequency = frequency;
-	priv->bandwidth = c->bandwidth_hz;
-
-	return 5;
-}
-
-static int dvb_pll_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
-	struct dvb_pll_priv *priv = fe->tuner_priv;
-	*frequency = priv->frequency;
-	return 0;
-}
-
-static int dvb_pll_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
-{
-	struct dvb_pll_priv *priv = fe->tuner_priv;
-	*bandwidth = priv->bandwidth;
-	return 0;
-}
-
-static int dvb_pll_init(struct dvb_frontend *fe)
-{
-	struct dvb_pll_priv *priv = fe->tuner_priv;
-
-	if (priv->i2c == NULL)
-		return -EINVAL;
-
-	if (priv->pll_desc->initdata) {
-		struct i2c_msg msg = { .flags = 0,
-			.addr = priv->pll_i2c_address,
-			.buf = priv->pll_desc->initdata + 1,
-			.len = priv->pll_desc->initdata[0] };
-
-		int result;
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 1);
-		result = i2c_transfer(priv->i2c, &msg, 1);
-		if (result != 1)
-			return result;
-		if (priv->pll_desc->initdata2) {
-			msg.buf = priv->pll_desc->initdata2 + 1;
-			msg.len = priv->pll_desc->initdata2[0];
-			if (fe->ops.i2c_gate_ctrl)
-				fe->ops.i2c_gate_ctrl(fe, 1);
-			result = i2c_transfer(priv->i2c, &msg, 1);
-			if (result != 1)
-				return result;
-		}
-		return 0;
-	}
-	/* Shouldn't be called when initdata is NULL, maybe BUG()? */
-	return -EINVAL;
-}
-
-static struct dvb_tuner_ops dvb_pll_tuner_ops = {
-	.release = dvb_pll_release,
-	.sleep = dvb_pll_sleep,
-	.init = dvb_pll_init,
-	.set_params = dvb_pll_set_params,
-	.calc_regs = dvb_pll_calc_regs,
-	.get_frequency = dvb_pll_get_frequency,
-	.get_bandwidth = dvb_pll_get_bandwidth,
-};
-
-struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr,
-				    struct i2c_adapter *i2c,
-				    unsigned int pll_desc_id)
-{
-	u8 b1 [] = { 0 };
-	struct i2c_msg msg = { .addr = pll_addr, .flags = I2C_M_RD,
-			       .buf = b1, .len = 1 };
-	struct dvb_pll_priv *priv = NULL;
-	int ret;
-	struct dvb_pll_desc *desc;
-
-	if ((id[dvb_pll_devcount] > DVB_PLL_UNDEFINED) &&
-	    (id[dvb_pll_devcount] < ARRAY_SIZE(pll_list)))
-		pll_desc_id = id[dvb_pll_devcount];
-
-	BUG_ON(pll_desc_id < 1 || pll_desc_id >= ARRAY_SIZE(pll_list));
-
-	desc = pll_list[pll_desc_id];
-
-	if (i2c != NULL) {
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 1);
-
-		ret = i2c_transfer (i2c, &msg, 1);
-		if (ret != 1)
-			return NULL;
-		if (fe->ops.i2c_gate_ctrl)
-			     fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	priv = kzalloc(sizeof(struct dvb_pll_priv), GFP_KERNEL);
-	if (priv == NULL)
-		return NULL;
-
-	priv->pll_i2c_address = pll_addr;
-	priv->i2c = i2c;
-	priv->pll_desc = desc;
-	priv->nr = dvb_pll_devcount++;
-
-	memcpy(&fe->ops.tuner_ops, &dvb_pll_tuner_ops,
-	       sizeof(struct dvb_tuner_ops));
-
-	strncpy(fe->ops.tuner_ops.info.name, desc->name,
-		sizeof(fe->ops.tuner_ops.info.name));
-	fe->ops.tuner_ops.info.frequency_min = desc->min;
-	fe->ops.tuner_ops.info.frequency_max = desc->max;
-	if (!desc->initdata)
-		fe->ops.tuner_ops.init = NULL;
-	if (!desc->sleepdata)
-		fe->ops.tuner_ops.sleep = NULL;
-
-	fe->tuner_priv = priv;
-
-	if ((debug) || (id[priv->nr] == pll_desc_id)) {
-		printk("dvb-pll[%d]", priv->nr);
-		if (i2c != NULL)
-			printk(" %d-%04x", i2c_adapter_id(i2c), pll_addr);
-		printk(": id# %d (%s) attached, %s\n", pll_desc_id, desc->name,
-		       id[priv->nr] == pll_desc_id ?
-				"insmod option" : "autodetected");
-	}
-
-	return fe;
-}
-EXPORT_SYMBOL(dvb_pll_attach);
-
-MODULE_DESCRIPTION("dvb pll library");
-MODULE_AUTHOR("Gerd Knorr");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/dvb-pll.h b/drivers/media/dvb/frontends/dvb-pll.h
deleted file mode 100644
index 0869643..0000000
--- a/drivers/media/dvb/frontends/dvb-pll.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * descriptions + helper functions for simple dvb plls.
- */
-
-#ifndef __DVB_PLL_H__
-#define __DVB_PLL_H__
-
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-
-#define DVB_PLL_UNDEFINED               0
-#define DVB_PLL_THOMSON_DTT7579         1
-#define DVB_PLL_THOMSON_DTT759X         2
-#define DVB_PLL_LG_Z201                 3
-#define DVB_PLL_UNKNOWN_1               4
-#define DVB_PLL_TUA6010XS               5
-#define DVB_PLL_ENV57H1XD5              6
-#define DVB_PLL_TUA6034                 7
-#define DVB_PLL_TDA665X                 8
-#define DVB_PLL_TDED4                   9
-#define DVB_PLL_TDHU2                  10
-#define DVB_PLL_SAMSUNG_TBMV           11
-#define DVB_PLL_PHILIPS_SD1878_TDA8261 12
-#define DVB_PLL_OPERA1                 13
-#define DVB_PLL_SAMSUNG_DTOS403IH102A  14
-#define DVB_PLL_SAMSUNG_TDTC9251DH0    15
-#define DVB_PLL_SAMSUNG_TBDU18132      16
-#define DVB_PLL_SAMSUNG_TBMU24112      17
-#define DVB_PLL_TDEE4		       18
-
-/**
- * Attach a dvb-pll to the supplied frontend structure.
- *
- * @param fe Frontend to attach to.
- * @param pll_addr i2c address of the PLL (if used).
- * @param i2c i2c adapter to use (set to NULL if not used).
- * @param pll_desc_id dvb_pll_desc to use.
- * @return Frontend pointer on success, NULL on failure
- */
-#if defined(CONFIG_DVB_PLL) || (defined(CONFIG_DVB_PLL_MODULE) && defined(MODULE))
-extern struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe,
-					   int pll_addr,
-					   struct i2c_adapter *i2c,
-					   unsigned int pll_desc_id);
-#else
-static inline struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe,
-					   int pll_addr,
-					   struct i2c_adapter *i2c,
-					   unsigned int pll_desc_id)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif
diff --git a/drivers/media/dvb/frontends/dvb_dummy_fe.c b/drivers/media/dvb/frontends/dvb_dummy_fe.c
deleted file mode 100644
index dcfc902..0000000
--- a/drivers/media/dvb/frontends/dvb_dummy_fe.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- *  Driver for Dummy Frontend
- *
- *  Written by Emard <emard@softhome.net>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "dvb_dummy_fe.h"
-
-
-struct dvb_dummy_fe_state {
-	struct dvb_frontend frontend;
-};
-
-
-static int dvb_dummy_fe_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	*status = FE_HAS_SIGNAL
-		| FE_HAS_CARRIER
-		| FE_HAS_VITERBI
-		| FE_HAS_SYNC
-		| FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int dvb_dummy_fe_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	*ber = 0;
-	return 0;
-}
-
-static int dvb_dummy_fe_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	*strength = 0;
-	return 0;
-}
-
-static int dvb_dummy_fe_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	*snr = 0;
-	return 0;
-}
-
-static int dvb_dummy_fe_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	*ucblocks = 0;
-	return 0;
-}
-
-/*
- * Only needed if it actually reads something from the hardware
- */
-static int dvb_dummy_fe_get_frontend(struct dvb_frontend *fe)
-{
-	return 0;
-}
-
-static int dvb_dummy_fe_set_frontend(struct dvb_frontend *fe)
-{
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	return 0;
-}
-
-static int dvb_dummy_fe_sleep(struct dvb_frontend* fe)
-{
-	return 0;
-}
-
-static int dvb_dummy_fe_init(struct dvb_frontend* fe)
-{
-	return 0;
-}
-
-static int dvb_dummy_fe_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
-{
-	return 0;
-}
-
-static int dvb_dummy_fe_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
-{
-	return 0;
-}
-
-static void dvb_dummy_fe_release(struct dvb_frontend* fe)
-{
-	struct dvb_dummy_fe_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops dvb_dummy_fe_ofdm_ops;
-
-struct dvb_frontend* dvb_dummy_fe_ofdm_attach(void)
-{
-	struct dvb_dummy_fe_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &dvb_dummy_fe_ofdm_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops dvb_dummy_fe_qpsk_ops;
-
-struct dvb_frontend *dvb_dummy_fe_qpsk_attach(void)
-{
-	struct dvb_dummy_fe_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &dvb_dummy_fe_qpsk_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops dvb_dummy_fe_qam_ops;
-
-struct dvb_frontend *dvb_dummy_fe_qam_attach(void)
-{
-	struct dvb_dummy_fe_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &dvb_dummy_fe_qam_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops dvb_dummy_fe_ofdm_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name			= "Dummy DVB-T",
-		.frequency_min		= 0,
-		.frequency_max		= 863250000,
-		.frequency_stepsize	= 62500,
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-				FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
-				FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
-				FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-				FE_CAN_TRANSMISSION_MODE_AUTO |
-				FE_CAN_GUARD_INTERVAL_AUTO |
-				FE_CAN_HIERARCHY_AUTO,
-	},
-
-	.release = dvb_dummy_fe_release,
-
-	.init = dvb_dummy_fe_init,
-	.sleep = dvb_dummy_fe_sleep,
-
-	.set_frontend = dvb_dummy_fe_set_frontend,
-	.get_frontend = dvb_dummy_fe_get_frontend,
-
-	.read_status = dvb_dummy_fe_read_status,
-	.read_ber = dvb_dummy_fe_read_ber,
-	.read_signal_strength = dvb_dummy_fe_read_signal_strength,
-	.read_snr = dvb_dummy_fe_read_snr,
-	.read_ucblocks = dvb_dummy_fe_read_ucblocks,
-};
-
-static struct dvb_frontend_ops dvb_dummy_fe_qam_ops = {
-	.delsys = { SYS_DVBC_ANNEX_A },
-	.info = {
-		.name			= "Dummy DVB-C",
-		.frequency_stepsize	= 62500,
-		.frequency_min		= 51000000,
-		.frequency_max		= 858000000,
-		.symbol_rate_min	= (57840000/2)/64,     /* SACLK/64 == (XIN/2)/64 */
-		.symbol_rate_max	= (57840000/2)/4,      /* SACLK/4 */
-		.caps = FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 |
-			FE_CAN_QAM_128 | FE_CAN_QAM_256 |
-			FE_CAN_FEC_AUTO | FE_CAN_INVERSION_AUTO
-	},
-
-	.release = dvb_dummy_fe_release,
-
-	.init = dvb_dummy_fe_init,
-	.sleep = dvb_dummy_fe_sleep,
-
-	.set_frontend = dvb_dummy_fe_set_frontend,
-	.get_frontend = dvb_dummy_fe_get_frontend,
-
-	.read_status = dvb_dummy_fe_read_status,
-	.read_ber = dvb_dummy_fe_read_ber,
-	.read_signal_strength = dvb_dummy_fe_read_signal_strength,
-	.read_snr = dvb_dummy_fe_read_snr,
-	.read_ucblocks = dvb_dummy_fe_read_ucblocks,
-};
-
-static struct dvb_frontend_ops dvb_dummy_fe_qpsk_ops = {
-	.delsys = { SYS_DVBS },
-	.info = {
-		.name			= "Dummy DVB-S",
-		.frequency_min		= 950000,
-		.frequency_max		= 2150000,
-		.frequency_stepsize	= 250,           /* kHz for QPSK frontends */
-		.frequency_tolerance	= 29500,
-		.symbol_rate_min	= 1000000,
-		.symbol_rate_max	= 45000000,
-		.caps = FE_CAN_INVERSION_AUTO |
-			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK
-	},
-
-	.release = dvb_dummy_fe_release,
-
-	.init = dvb_dummy_fe_init,
-	.sleep = dvb_dummy_fe_sleep,
-
-	.set_frontend = dvb_dummy_fe_set_frontend,
-	.get_frontend = dvb_dummy_fe_get_frontend,
-
-	.read_status = dvb_dummy_fe_read_status,
-	.read_ber = dvb_dummy_fe_read_ber,
-	.read_signal_strength = dvb_dummy_fe_read_signal_strength,
-	.read_snr = dvb_dummy_fe_read_snr,
-	.read_ucblocks = dvb_dummy_fe_read_ucblocks,
-
-	.set_voltage = dvb_dummy_fe_set_voltage,
-	.set_tone = dvb_dummy_fe_set_tone,
-};
-
-MODULE_DESCRIPTION("DVB DUMMY Frontend");
-MODULE_AUTHOR("Emard");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(dvb_dummy_fe_ofdm_attach);
-EXPORT_SYMBOL(dvb_dummy_fe_qam_attach);
-EXPORT_SYMBOL(dvb_dummy_fe_qpsk_attach);
diff --git a/drivers/media/dvb/frontends/dvb_dummy_fe.h b/drivers/media/dvb/frontends/dvb_dummy_fe.h
deleted file mode 100644
index 1fcb987..0000000
--- a/drivers/media/dvb/frontends/dvb_dummy_fe.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- *  Driver for Dummy Frontend
- *
- *  Written by Emard <emard@softhome.net>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
- */
-
-#ifndef DVB_DUMMY_FE_H
-#define DVB_DUMMY_FE_H
-
-#include <linux/dvb/frontend.h>
-#include "dvb_frontend.h"
-
-#if defined(CONFIG_DVB_DUMMY_FE) || (defined(CONFIG_DVB_DUMMY_FE_MODULE) && \
-defined(MODULE))
-extern struct dvb_frontend* dvb_dummy_fe_ofdm_attach(void);
-extern struct dvb_frontend* dvb_dummy_fe_qpsk_attach(void);
-extern struct dvb_frontend* dvb_dummy_fe_qam_attach(void);
-#else
-static inline struct dvb_frontend *dvb_dummy_fe_ofdm_attach(void)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-static inline struct dvb_frontend *dvb_dummy_fe_qpsk_attach(void)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-static inline struct dvb_frontend *dvb_dummy_fe_qam_attach(void)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_DUMMY_FE */
-
-#endif // DVB_DUMMY_FE_H
diff --git a/drivers/media/dvb/frontends/ec100.c b/drivers/media/dvb/frontends/ec100.c
deleted file mode 100644
index c56fddb..0000000
--- a/drivers/media/dvb/frontends/ec100.c
+++ /dev/null
@@ -1,335 +0,0 @@
-/*
- * E3C EC100 demodulator driver
- *
- * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include "dvb_frontend.h"
-#include "ec100_priv.h"
-#include "ec100.h"
-
-int ec100_debug;
-module_param_named(debug, ec100_debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-struct ec100_state {
-	struct i2c_adapter *i2c;
-	struct dvb_frontend frontend;
-	struct ec100_config config;
-
-	u16 ber;
-};
-
-/* write single register */
-static int ec100_write_reg(struct ec100_state *state, u8 reg, u8 val)
-{
-	u8 buf[2] = {reg, val};
-	struct i2c_msg msg = {
-		.addr = state->config.demod_address,
-		.flags = 0,
-		.len = 2,
-		.buf = buf};
-
-	if (i2c_transfer(state->i2c, &msg, 1) != 1) {
-		warn("I2C write failed reg:%02x", reg);
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-
-/* read single register */
-static int ec100_read_reg(struct ec100_state *state, u8 reg, u8 *val)
-{
-	struct i2c_msg msg[2] = {
-		{
-			.addr = state->config.demod_address,
-			.flags = 0,
-			.len = 1,
-			.buf = &reg
-		}, {
-			.addr = state->config.demod_address,
-			.flags = I2C_M_RD,
-			.len = 1,
-			.buf = val
-		}
-	};
-
-	if (i2c_transfer(state->i2c, msg, 2) != 2) {
-		warn("I2C read failed reg:%02x", reg);
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-
-static int ec100_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct ec100_state *state = fe->demodulator_priv;
-	int ret;
-	u8 tmp, tmp2;
-
-	deb_info("%s: freq:%d bw:%d\n", __func__, c->frequency,
-		c->bandwidth_hz);
-
-	/* program tuner */
-	if (fe->ops.tuner_ops.set_params)
-		fe->ops.tuner_ops.set_params(fe);
-
-	ret = ec100_write_reg(state, 0x04, 0x06);
-	if (ret)
-		goto error;
-	ret = ec100_write_reg(state, 0x67, 0x58);
-	if (ret)
-		goto error;
-	ret = ec100_write_reg(state, 0x05, 0x18);
-	if (ret)
-		goto error;
-
-	/* reg/bw |   6  |   7  |   8
-	   -------+------+------+------
-	   A 0x1b | 0xa1 | 0xe7 | 0x2c
-	   A 0x1c | 0x55 | 0x63 | 0x72
-	   -------+------+------+------
-	   B 0x1b | 0xb7 | 0x00 | 0x49
-	   B 0x1c | 0x55 | 0x64 | 0x72 */
-
-	switch (c->bandwidth_hz) {
-	case 6000000:
-		tmp = 0xb7;
-		tmp2 = 0x55;
-		break;
-	case 7000000:
-		tmp = 0x00;
-		tmp2 = 0x64;
-		break;
-	case 8000000:
-	default:
-		tmp = 0x49;
-		tmp2 = 0x72;
-	}
-
-	ret = ec100_write_reg(state, 0x1b, tmp);
-	if (ret)
-		goto error;
-	ret = ec100_write_reg(state, 0x1c, tmp2);
-	if (ret)
-		goto error;
-
-	ret = ec100_write_reg(state, 0x0c, 0xbb); /* if freq */
-	if (ret)
-		goto error;
-	ret = ec100_write_reg(state, 0x0d, 0x31); /* if freq */
-	if (ret)
-		goto error;
-
-	ret = ec100_write_reg(state, 0x08, 0x24);
-	if (ret)
-		goto error;
-
-	ret = ec100_write_reg(state, 0x00, 0x00); /* go */
-	if (ret)
-		goto error;
-	ret = ec100_write_reg(state, 0x00, 0x20); /* go */
-	if (ret)
-		goto error;
-
-	return ret;
-error:
-	deb_info("%s: failed:%d\n", __func__, ret);
-	return ret;
-}
-
-static int ec100_get_tune_settings(struct dvb_frontend *fe,
-	struct dvb_frontend_tune_settings *fesettings)
-{
-	fesettings->min_delay_ms = 300;
-	fesettings->step_size = 0;
-	fesettings->max_drift = 0;
-
-	return 0;
-}
-
-static int ec100_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct ec100_state *state = fe->demodulator_priv;
-	int ret;
-	u8 tmp;
-	*status = 0;
-
-	ret = ec100_read_reg(state, 0x42, &tmp);
-	if (ret)
-		goto error;
-
-	if (tmp & 0x80) {
-		/* bit7 set - have lock */
-		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI |
-			FE_HAS_SYNC | FE_HAS_LOCK;
-	} else {
-		ret = ec100_read_reg(state, 0x01, &tmp);
-		if (ret)
-			goto error;
-
-		if (tmp & 0x10) {
-			/* bit4 set - have signal */
-			*status |= FE_HAS_SIGNAL;
-			if (!(tmp & 0x01)) {
-				/* bit0 clear - have ~valid signal */
-				*status |= FE_HAS_CARRIER |  FE_HAS_VITERBI;
-			}
-		}
-	}
-
-	return ret;
-error:
-	deb_info("%s: failed:%d\n", __func__, ret);
-	return ret;
-}
-
-static int ec100_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct ec100_state *state = fe->demodulator_priv;
-	int ret;
-	u8 tmp, tmp2;
-	u16 ber2;
-
-	*ber = 0;
-
-	ret = ec100_read_reg(state, 0x65, &tmp);
-	if (ret)
-		goto error;
-	ret = ec100_read_reg(state, 0x66, &tmp2);
-	if (ret)
-		goto error;
-
-	ber2 = (tmp2 << 8) | tmp;
-
-	/* if counter overflow or clear */
-	if (ber2 < state->ber)
-		*ber = ber2;
-	else
-		*ber = ber2 - state->ber;
-
-	state->ber = ber2;
-
-	return ret;
-error:
-	deb_info("%s: failed:%d\n", __func__, ret);
-	return ret;
-}
-
-static int ec100_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	struct ec100_state *state = fe->demodulator_priv;
-	int ret;
-	u8 tmp;
-
-	ret = ec100_read_reg(state, 0x24, &tmp);
-	if (ret) {
-		*strength = 0;
-		goto error;
-	}
-
-	*strength = ((tmp << 8) | tmp);
-
-	return ret;
-error:
-	deb_info("%s: failed:%d\n", __func__, ret);
-	return ret;
-}
-
-static int ec100_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	*snr = 0;
-	return 0;
-}
-
-static int ec100_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	*ucblocks = 0;
-	return 0;
-}
-
-static void ec100_release(struct dvb_frontend *fe)
-{
-	struct ec100_state *state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops ec100_ops;
-
-struct dvb_frontend *ec100_attach(const struct ec100_config *config,
-	struct i2c_adapter *i2c)
-{
-	int ret;
-	struct ec100_state *state = NULL;
-	u8 tmp;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct ec100_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->i2c = i2c;
-	memcpy(&state->config, config, sizeof(struct ec100_config));
-
-	/* check if the demod is there */
-	ret = ec100_read_reg(state, 0x33, &tmp);
-	if (ret || tmp != 0x0b)
-		goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &ec100_ops,
-		sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-
-	return &state->frontend;
-error:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(ec100_attach);
-
-static struct dvb_frontend_ops ec100_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name = "E3C EC100 DVB-T",
-		.caps =
-			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK | FE_CAN_QAM_16 |
-			FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO |
-			FE_CAN_GUARD_INTERVAL_AUTO |
-			FE_CAN_HIERARCHY_AUTO |
-			FE_CAN_MUTE_TS
-	},
-
-	.release = ec100_release,
-	.set_frontend = ec100_set_frontend,
-	.get_tune_settings = ec100_get_tune_settings,
-	.read_status = ec100_read_status,
-	.read_ber = ec100_read_ber,
-	.read_signal_strength = ec100_read_signal_strength,
-	.read_snr = ec100_read_snr,
-	.read_ucblocks = ec100_read_ucblocks,
-};
-
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_DESCRIPTION("E3C EC100 DVB-T demodulator driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/ec100.h b/drivers/media/dvb/frontends/ec100.h
deleted file mode 100644
index ee8e524..0000000
--- a/drivers/media/dvb/frontends/ec100.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * E3C EC100 demodulator driver
- *
- * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef EC100_H
-#define EC100_H
-
-#include <linux/dvb/frontend.h>
-
-struct ec100_config {
-	/* demodulator's I2C address */
-	u8 demod_address;
-};
-
-
-#if defined(CONFIG_DVB_EC100) || \
-	(defined(CONFIG_DVB_EC100_MODULE) && defined(MODULE))
-extern struct dvb_frontend *ec100_attach(const struct ec100_config *config,
-	struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *ec100_attach(
-	const struct ec100_config *config, struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif /* EC100_H */
diff --git a/drivers/media/dvb/frontends/ec100_priv.h b/drivers/media/dvb/frontends/ec100_priv.h
deleted file mode 100644
index 5c99014..0000000
--- a/drivers/media/dvb/frontends/ec100_priv.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * E3C EC100 demodulator driver
- *
- * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef EC100_PRIV
-#define EC100_PRIV
-
-#define LOG_PREFIX "ec100"
-
-#define dprintk(var, level, args...) \
-	do { if ((var & level)) printk(args); } while (0)
-
-#define deb_info(args...) dprintk(ec100_debug, 0x01, args)
-
-#undef err
-#define err(f, arg...)  printk(KERN_ERR     LOG_PREFIX": " f "\n" , ## arg)
-#undef info
-#define info(f, arg...) printk(KERN_INFO    LOG_PREFIX": " f "\n" , ## arg)
-#undef warn
-#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg)
-
-#endif /* EC100_PRIV */
diff --git a/drivers/media/dvb/frontends/eds1547.h b/drivers/media/dvb/frontends/eds1547.h
deleted file mode 100644
index c983f2f..0000000
--- a/drivers/media/dvb/frontends/eds1547.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/* eds1547.h Earda EDS-1547 tuner support
-*
-* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
-*
-*	This program is free software; you can redistribute it and/or modify it
-*	under the terms of the GNU General Public License as published by the
-*	Free Software Foundation, version 2.
-*
-* see Documentation/dvb/README.dvb-usb for more information
-*/
-
-#ifndef EDS1547
-#define EDS1547
-
-static u8 stv0288_earda_inittab[] = {
-	0x01, 0x57,
-	0x02, 0x20,
-	0x03, 0x8e,
-	0x04, 0x8e,
-	0x05, 0x12,
-	0x06, 0x00,
-	0x07, 0x00,
-	0x09, 0x00,
-	0x0a, 0x04,
-	0x0b, 0x00,
-	0x0c, 0x00,
-	0x0d, 0x00,
-	0x0e, 0xd4,
-	0x0f, 0x30,
-	0x11, 0x44,
-	0x12, 0x03,
-	0x13, 0x48,
-	0x14, 0x84,
-	0x15, 0x45,
-	0x16, 0xb7,
-	0x17, 0x9c,
-	0x18, 0x00,
-	0x19, 0xa6,
-	0x1a, 0x88,
-	0x1b, 0x8f,
-	0x1c, 0xf0,
-	0x20, 0x0b,
-	0x21, 0x54,
-	0x22, 0x00,
-	0x23, 0x00,
-	0x2b, 0xff,
-	0x2c, 0xf7,
-	0x30, 0x00,
-	0x31, 0x1e,
-	0x32, 0x14,
-	0x33, 0x0f,
-	0x34, 0x09,
-	0x35, 0x0c,
-	0x36, 0x05,
-	0x37, 0x2f,
-	0x38, 0x16,
-	0x39, 0xbd,
-	0x3a, 0x00,
-	0x3b, 0x13,
-	0x3c, 0x11,
-	0x3d, 0x30,
-	0x40, 0x63,
-	0x41, 0x04,
-	0x42, 0x20,
-	0x43, 0x00,
-	0x44, 0x00,
-	0x45, 0x00,
-	0x46, 0x00,
-	0x47, 0x00,
-	0x4a, 0x00,
-	0x50, 0x10,
-	0x51, 0x36,
-	0x52, 0x09,
-	0x53, 0x94,
-	0x54, 0x62,
-	0x55, 0x29,
-	0x56, 0x64,
-	0x57, 0x2b,
-	0x58, 0x54,
-	0x59, 0x86,
-	0x5a, 0x00,
-	0x5b, 0x9b,
-	0x5c, 0x08,
-	0x5d, 0x7f,
-	0x5e, 0x00,
-	0x5f, 0xff,
-	0x70, 0x00,
-	0x71, 0x00,
-	0x72, 0x00,
-	0x74, 0x00,
-	0x75, 0x00,
-	0x76, 0x00,
-	0x81, 0x00,
-	0x82, 0x3f,
-	0x83, 0x3f,
-	0x84, 0x00,
-	0x85, 0x00,
-	0x88, 0x00,
-	0x89, 0x00,
-	0x8a, 0x00,
-	0x8b, 0x00,
-	0x8c, 0x00,
-	0x90, 0x00,
-	0x91, 0x00,
-	0x92, 0x00,
-	0x93, 0x00,
-	0x94, 0x1c,
-	0x97, 0x00,
-	0xa0, 0x48,
-	0xa1, 0x00,
-	0xb0, 0xb8,
-	0xb1, 0x3a,
-	0xb2, 0x10,
-	0xb3, 0x82,
-	0xb4, 0x80,
-	0xb5, 0x82,
-	0xb6, 0x82,
-	0xb7, 0x82,
-	0xb8, 0x20,
-	0xb9, 0x00,
-	0xf0, 0x00,
-	0xf1, 0x00,
-	0xf2, 0xc0,
-	0xff,0xff,
-};
-
-static struct stv0288_config earda_config = {
-	.demod_address = 0x68,
-	.min_delay_ms = 100,
-	.inittab = stv0288_earda_inittab,
-};
-
-#endif
diff --git a/drivers/media/dvb/frontends/hd29l2.c b/drivers/media/dvb/frontends/hd29l2.c
deleted file mode 100644
index a003181..0000000
--- a/drivers/media/dvb/frontends/hd29l2.c
+++ /dev/null
@@ -1,861 +0,0 @@
-/*
- * HDIC HD29L2 DMB-TH demodulator driver
- *
- * Copyright (C) 2011 Metropolia University of Applied Sciences, Electria R&D
- *
- * Author: Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "hd29l2_priv.h"
-
-int hd29l2_debug;
-module_param_named(debug, hd29l2_debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-/* write multiple registers */
-static int hd29l2_wr_regs(struct hd29l2_priv *priv, u8 reg, u8 *val, int len)
-{
-	int ret;
-	u8 buf[2 + len];
-	struct i2c_msg msg[1] = {
-		{
-			.addr = priv->cfg.i2c_addr,
-			.flags = 0,
-			.len = sizeof(buf),
-			.buf = buf,
-		}
-	};
-
-	buf[0] = 0x00;
-	buf[1] = reg;
-	memcpy(&buf[2], val, len);
-
-	ret = i2c_transfer(priv->i2c, msg, 1);
-	if (ret == 1) {
-		ret = 0;
-	} else {
-		warn("i2c wr failed=%d reg=%02x len=%d", ret, reg, len);
-		ret = -EREMOTEIO;
-	}
-
-	return ret;
-}
-
-/* read multiple registers */
-static int hd29l2_rd_regs(struct hd29l2_priv *priv, u8 reg, u8 *val, int len)
-{
-	int ret;
-	u8 buf[2] = { 0x00, reg };
-	struct i2c_msg msg[2] = {
-		{
-			.addr = priv->cfg.i2c_addr,
-			.flags = 0,
-			.len = 2,
-			.buf = buf,
-		}, {
-			.addr = priv->cfg.i2c_addr,
-			.flags = I2C_M_RD,
-			.len = len,
-			.buf = val,
-		}
-	};
-
-	ret = i2c_transfer(priv->i2c, msg, 2);
-	if (ret == 2) {
-		ret = 0;
-	} else {
-		warn("i2c rd failed=%d reg=%02x len=%d", ret, reg, len);
-		ret = -EREMOTEIO;
-	}
-
-	return ret;
-}
-
-/* write single register */
-static int hd29l2_wr_reg(struct hd29l2_priv *priv, u8 reg, u8 val)
-{
-	return hd29l2_wr_regs(priv, reg, &val, 1);
-}
-
-/* read single register */
-static int hd29l2_rd_reg(struct hd29l2_priv *priv, u8 reg, u8 *val)
-{
-	return hd29l2_rd_regs(priv, reg, val, 1);
-}
-
-/* write single register with mask */
-static int hd29l2_wr_reg_mask(struct hd29l2_priv *priv, u8 reg, u8 val, u8 mask)
-{
-	int ret;
-	u8 tmp;
-
-	/* no need for read if whole reg is written */
-	if (mask != 0xff) {
-		ret = hd29l2_rd_regs(priv, reg, &tmp, 1);
-		if (ret)
-			return ret;
-
-		val &= mask;
-		tmp &= ~mask;
-		val |= tmp;
-	}
-
-	return hd29l2_wr_regs(priv, reg, &val, 1);
-}
-
-/* read single register with mask */
-int hd29l2_rd_reg_mask(struct hd29l2_priv *priv, u8 reg, u8 *val, u8 mask)
-{
-	int ret, i;
-	u8 tmp;
-
-	ret = hd29l2_rd_regs(priv, reg, &tmp, 1);
-	if (ret)
-		return ret;
-
-	tmp &= mask;
-
-	/* find position of the first bit */
-	for (i = 0; i < 8; i++) {
-		if ((mask >> i) & 0x01)
-			break;
-	}
-	*val = tmp >> i;
-
-	return 0;
-}
-
-static int hd29l2_soft_reset(struct hd29l2_priv *priv)
-{
-	int ret;
-	u8 tmp;
-
-	ret = hd29l2_rd_reg(priv, 0x26, &tmp);
-	if (ret)
-		goto err;
-
-	ret = hd29l2_wr_reg(priv, 0x26, 0x0d);
-	if (ret)
-		goto err;
-
-	usleep_range(10000, 20000);
-
-	ret = hd29l2_wr_reg(priv, 0x26, tmp);
-	if (ret)
-		goto err;
-
-	return 0;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int hd29l2_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	int ret, i;
-	struct hd29l2_priv *priv = fe->demodulator_priv;
-	u8 tmp;
-
-	dbg("%s: enable=%d", __func__, enable);
-
-	/* set tuner address for demod */
-	if (!priv->tuner_i2c_addr_programmed && enable) {
-		/* no need to set tuner address every time, once is enough */
-		ret = hd29l2_wr_reg(priv, 0x9d, priv->cfg.tuner_i2c_addr << 1);
-		if (ret)
-			goto err;
-
-		priv->tuner_i2c_addr_programmed = true;
-	}
-
-	/* open / close gate */
-	ret = hd29l2_wr_reg(priv, 0x9f, enable);
-	if (ret)
-		goto err;
-
-	/* wait demod ready */
-	for (i = 10; i; i--) {
-		ret = hd29l2_rd_reg(priv, 0x9e, &tmp);
-		if (ret)
-			goto err;
-
-		if (tmp == enable)
-			break;
-
-		usleep_range(5000, 10000);
-	}
-
-	dbg("%s: loop=%d", __func__, i);
-
-	return ret;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int hd29l2_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	int ret;
-	struct hd29l2_priv *priv = fe->demodulator_priv;
-	u8 buf[2];
-
-	*status = 0;
-
-	ret = hd29l2_rd_reg(priv, 0x05, &buf[0]);
-	if (ret)
-		goto err;
-
-	if (buf[0] & 0x01) {
-		/* full lock */
-		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI |
-			FE_HAS_SYNC | FE_HAS_LOCK;
-	} else {
-		ret = hd29l2_rd_reg(priv, 0x0d, &buf[1]);
-		if (ret)
-			goto err;
-
-		if ((buf[1] & 0xfe) == 0x78)
-			/* partial lock */
-			*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
-				FE_HAS_VITERBI | FE_HAS_SYNC;
-	}
-
-	priv->fe_status = *status;
-
-	return 0;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int hd29l2_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	int ret;
-	struct hd29l2_priv *priv = fe->demodulator_priv;
-	u8 buf[2];
-	u16 tmp;
-
-	if (!(priv->fe_status & FE_HAS_LOCK)) {
-		*snr = 0;
-		ret = 0;
-		goto err;
-	}
-
-	ret = hd29l2_rd_regs(priv, 0x0b, buf, 2);
-	if (ret)
-		goto err;
-
-	tmp = (buf[0] << 8) | buf[1];
-
-	/* report SNR in dB * 10 */
-	#define LOG10_20736_24 72422627 /* log10(20736) << 24 */
-	if (tmp)
-		*snr = (LOG10_20736_24 - intlog10(tmp)) / ((1 << 24) / 100);
-	else
-		*snr = 0;
-
-	return 0;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int hd29l2_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	int ret;
-	struct hd29l2_priv *priv = fe->demodulator_priv;
-	u8 buf[2];
-	u16 tmp;
-
-	*strength = 0;
-
-	ret = hd29l2_rd_regs(priv, 0xd5, buf, 2);
-	if (ret)
-		goto err;
-
-	tmp = buf[0] << 8 | buf[1];
-	tmp = ~tmp & 0x0fff;
-
-	/* scale value to 0x0000-0xffff from 0x0000-0x0fff */
-	*strength = tmp * 0xffff / 0x0fff;
-
-	return 0;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int hd29l2_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	int ret;
-	struct hd29l2_priv *priv = fe->demodulator_priv;
-	u8 buf[2];
-
-	if (!(priv->fe_status & FE_HAS_SYNC)) {
-		*ber = 0;
-		ret = 0;
-		goto err;
-	}
-
-	ret = hd29l2_rd_regs(priv, 0xd9, buf, 2);
-	if (ret) {
-		*ber = 0;
-		goto err;
-	}
-
-	/* LDPC BER */
-	*ber = ((buf[0] & 0x0f) << 8) | buf[1];
-
-	return 0;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int hd29l2_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	/* no way to read? */
-	*ucblocks = 0;
-	return 0;
-}
-
-static enum dvbfe_search hd29l2_search(struct dvb_frontend *fe)
-{
-	int ret, i;
-	struct hd29l2_priv *priv = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	u8 tmp, buf[3];
-	u8 modulation, carrier, guard_interval, interleave, code_rate;
-	u64 num64;
-	u32 if_freq, if_ctl;
-	bool auto_mode;
-
-	dbg("%s: delivery_system=%d frequency=%d bandwidth_hz=%d " \
-		"modulation=%d inversion=%d fec_inner=%d guard_interval=%d",
-		 __func__,
-		c->delivery_system, c->frequency, c->bandwidth_hz,
-		c->modulation, c->inversion, c->fec_inner, c->guard_interval);
-
-	/* as for now we detect always params automatically */
-	auto_mode = true;
-
-	/* program tuner */
-	if (fe->ops.tuner_ops.set_params)
-		fe->ops.tuner_ops.set_params(fe);
-
-	/* get and program IF */
-	if (fe->ops.tuner_ops.get_if_frequency)
-		fe->ops.tuner_ops.get_if_frequency(fe, &if_freq);
-	else
-		if_freq = 0;
-
-	if (if_freq) {
-		/* normal IF */
-
-		/* calc IF control value */
-		num64 = if_freq;
-		num64 *= 0x800000;
-		num64 = div_u64(num64, HD29L2_XTAL);
-		num64 -= 0x800000;
-		if_ctl = num64;
-
-		tmp = 0xfc; /* tuner type normal */
-	} else {
-		/* zero IF */
-		if_ctl = 0;
-		tmp = 0xfe; /* tuner type Zero-IF */
-	}
-
-	buf[0] = ((if_ctl >>  0) & 0xff);
-	buf[1] = ((if_ctl >>  8) & 0xff);
-	buf[2] = ((if_ctl >> 16) & 0xff);
-
-	/* program IF control */
-	ret = hd29l2_wr_regs(priv, 0x14, buf, 3);
-	if (ret)
-		goto err;
-
-	/* program tuner type */
-	ret = hd29l2_wr_reg(priv, 0xab, tmp);
-	if (ret)
-		goto err;
-
-	dbg("%s: if_freq=%d if_ctl=%x", __func__, if_freq, if_ctl);
-
-	if (auto_mode) {
-		/*
-		 * use auto mode
-		 */
-
-		/* disable quick mode */
-		ret = hd29l2_wr_reg_mask(priv, 0xac, 0 << 7, 0x80);
-		if (ret)
-			goto err;
-
-		ret = hd29l2_wr_reg_mask(priv, 0x82, 1 << 1, 0x02);
-		if (ret)
-			goto err;
-
-		/* enable auto mode */
-		ret = hd29l2_wr_reg_mask(priv, 0x7d, 1 << 6, 0x40);
-		if (ret)
-			goto err;
-
-		ret = hd29l2_wr_reg_mask(priv, 0x81, 1 << 3, 0x08);
-		if (ret)
-			goto err;
-
-		/* soft reset */
-		ret = hd29l2_soft_reset(priv);
-		if (ret)
-			goto err;
-
-		/* detect modulation */
-		for (i = 30; i; i--) {
-			msleep(100);
-
-			ret = hd29l2_rd_reg(priv, 0x0d, &tmp);
-			if (ret)
-				goto err;
-
-			if ((((tmp & 0xf0) >= 0x10) &&
-				((tmp & 0x0f) == 0x08)) || (tmp >= 0x2c))
-				break;
-		}
-
-		dbg("%s: loop=%d", __func__, i);
-
-		if (i == 0)
-			/* detection failed */
-			return DVBFE_ALGO_SEARCH_FAILED;
-
-		/* read modulation */
-		ret = hd29l2_rd_reg_mask(priv, 0x7d, &modulation, 0x07);
-		if (ret)
-			goto err;
-	} else {
-		/*
-		 * use manual mode
-		 */
-
-		modulation = HD29L2_QAM64;
-		carrier = HD29L2_CARRIER_MULTI;
-		guard_interval = HD29L2_PN945;
-		interleave = HD29L2_INTERLEAVER_420;
-		code_rate = HD29L2_CODE_RATE_08;
-
-		tmp = (code_rate << 3) | modulation;
-		ret = hd29l2_wr_reg_mask(priv, 0x7d, tmp, 0x5f);
-		if (ret)
-			goto err;
-
-		tmp = (carrier << 2) | guard_interval;
-		ret = hd29l2_wr_reg_mask(priv, 0x81, tmp, 0x0f);
-		if (ret)
-			goto err;
-
-		tmp = interleave;
-		ret = hd29l2_wr_reg_mask(priv, 0x82, tmp, 0x03);
-		if (ret)
-			goto err;
-	}
-
-	/* ensure modulation validy */
-	/* 0=QAM4_NR, 1=QAM4, 2=QAM16, 3=QAM32, 4=QAM64 */
-	if (modulation > (ARRAY_SIZE(reg_mod_vals_tab[0].val) - 1)) {
-		dbg("%s: modulation=%d not valid", __func__, modulation);
-		goto err;
-	}
-
-	/* program registers according to modulation */
-	for (i = 0; i < ARRAY_SIZE(reg_mod_vals_tab); i++) {
-		ret = hd29l2_wr_reg(priv, reg_mod_vals_tab[i].reg,
-			reg_mod_vals_tab[i].val[modulation]);
-		if (ret)
-			goto err;
-	}
-
-	/* read guard interval */
-	ret = hd29l2_rd_reg_mask(priv, 0x81, &guard_interval, 0x03);
-	if (ret)
-		goto err;
-
-	/* read carrier mode */
-	ret = hd29l2_rd_reg_mask(priv, 0x81, &carrier, 0x04);
-	if (ret)
-		goto err;
-
-	dbg("%s: modulation=%d guard_interval=%d carrier=%d",
-		__func__, modulation, guard_interval, carrier);
-
-	if ((carrier == HD29L2_CARRIER_MULTI) && (modulation == HD29L2_QAM64) &&
-		(guard_interval == HD29L2_PN945)) {
-		dbg("%s: C=3780 && QAM64 && PN945", __func__);
-
-		ret = hd29l2_wr_reg(priv, 0x42, 0x33);
-		if (ret)
-			goto err;
-
-		ret = hd29l2_wr_reg(priv, 0xdd, 0x01);
-		if (ret)
-			goto err;
-	}
-
-	usleep_range(10000, 20000);
-
-	/* soft reset */
-	ret = hd29l2_soft_reset(priv);
-	if (ret)
-		goto err;
-
-	/* wait demod lock */
-	for (i = 30; i; i--) {
-		msleep(100);
-
-		/* read lock bit */
-		ret = hd29l2_rd_reg_mask(priv, 0x05, &tmp, 0x01);
-		if (ret)
-			goto err;
-
-		if (tmp)
-			break;
-	}
-
-	dbg("%s: loop=%d", __func__, i);
-
-	if (i == 0)
-		return DVBFE_ALGO_SEARCH_AGAIN;
-
-	return DVBFE_ALGO_SEARCH_SUCCESS;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return DVBFE_ALGO_SEARCH_ERROR;
-}
-
-static int hd29l2_get_frontend_algo(struct dvb_frontend *fe)
-{
-	return DVBFE_ALGO_CUSTOM;
-}
-
-static int hd29l2_get_frontend(struct dvb_frontend *fe)
-{
-	int ret;
-	struct hd29l2_priv *priv = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	u8 buf[3];
-	u32 if_ctl;
-	char *str_constellation, *str_code_rate, *str_constellation_code_rate,
-		*str_guard_interval, *str_carrier, *str_guard_interval_carrier,
-		*str_interleave, *str_interleave_;
-
-	ret = hd29l2_rd_reg(priv, 0x7d, &buf[0]);
-	if (ret)
-		goto err;
-
-	ret = hd29l2_rd_regs(priv, 0x81, &buf[1], 2);
-	if (ret)
-		goto err;
-
-	/* constellation, 0x7d[2:0] */
-	switch ((buf[0] >> 0) & 0x07) {
-	case 0: /* QAM4NR */
-		str_constellation = "QAM4NR";
-		c->modulation = QAM_AUTO; /* FIXME */
-		break;
-	case 1: /* QAM4 */
-		str_constellation = "QAM4";
-		c->modulation = QPSK; /* FIXME */
-		break;
-	case 2:
-		str_constellation = "QAM16";
-		c->modulation = QAM_16;
-		break;
-	case 3:
-		str_constellation = "QAM32";
-		c->modulation = QAM_32;
-		break;
-	case 4:
-		str_constellation = "QAM64";
-		c->modulation = QAM_64;
-		break;
-	default:
-		str_constellation = "?";
-	}
-
-	/* LDPC code rate, 0x7d[4:3] */
-	switch ((buf[0] >> 3) & 0x03) {
-	case 0: /* 0.4 */
-		str_code_rate = "0.4";
-		c->fec_inner = FEC_AUTO; /* FIXME */
-		break;
-	case 1: /* 0.6 */
-		str_code_rate = "0.6";
-		c->fec_inner = FEC_3_5;
-		break;
-	case 2: /* 0.8 */
-		str_code_rate = "0.8";
-		c->fec_inner = FEC_4_5;
-		break;
-	default:
-		str_code_rate = "?";
-	}
-
-	/* constellation & code rate set, 0x7d[6] */
-	switch ((buf[0] >> 6) & 0x01) {
-	case 0:
-		str_constellation_code_rate = "manual";
-		break;
-	case 1:
-		str_constellation_code_rate = "auto";
-		break;
-	default:
-		str_constellation_code_rate = "?";
-	}
-
-	/* frame header, 0x81[1:0] */
-	switch ((buf[1] >> 0) & 0x03) {
-	case 0: /* PN945 */
-		str_guard_interval = "PN945";
-		c->guard_interval = GUARD_INTERVAL_AUTO; /* FIXME */
-		break;
-	case 1: /* PN595 */
-		str_guard_interval = "PN595";
-		c->guard_interval = GUARD_INTERVAL_AUTO; /* FIXME */
-		break;
-	case 2: /* PN420 */
-		str_guard_interval = "PN420";
-		c->guard_interval = GUARD_INTERVAL_AUTO; /* FIXME */
-		break;
-	default:
-		str_guard_interval = "?";
-	}
-
-	/* carrier, 0x81[2] */
-	switch ((buf[1] >> 2) & 0x01) {
-	case 0:
-		str_carrier = "C=1";
-		break;
-	case 1:
-		str_carrier = "C=3780";
-		break;
-	default:
-		str_carrier = "?";
-	}
-
-	/* frame header & carrier set, 0x81[3] */
-	switch ((buf[1] >> 3) & 0x01) {
-	case 0:
-		str_guard_interval_carrier = "manual";
-		break;
-	case 1:
-		str_guard_interval_carrier = "auto";
-		break;
-	default:
-		str_guard_interval_carrier = "?";
-	}
-
-	/* interleave, 0x82[0] */
-	switch ((buf[2] >> 0) & 0x01) {
-	case 0:
-		str_interleave = "M=720";
-		break;
-	case 1:
-		str_interleave = "M=240";
-		break;
-	default:
-		str_interleave = "?";
-	}
-
-	/* interleave set, 0x82[1] */
-	switch ((buf[2] >> 1) & 0x01) {
-	case 0:
-		str_interleave_ = "manual";
-		break;
-	case 1:
-		str_interleave_ = "auto";
-		break;
-	default:
-		str_interleave_ = "?";
-	}
-
-	/*
-	 * We can read out current detected NCO and use that value next
-	 * time instead of calculating new value from targed IF.
-	 * I think it will not effect receiver sensitivity but gaining lock
-	 * after tune could be easier...
-	 */
-	ret = hd29l2_rd_regs(priv, 0xb1, &buf[0], 3);
-	if (ret)
-		goto err;
-
-	if_ctl = (buf[0] << 16) | ((buf[1] - 7) << 8) | buf[2];
-
-	dbg("%s: %s %s %s | %s %s %s | %s %s | NCO=%06x", __func__,
-		str_constellation, str_code_rate, str_constellation_code_rate,
-		str_guard_interval, str_carrier, str_guard_interval_carrier,
-		str_interleave, str_interleave_, if_ctl);
-
-	return 0;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int hd29l2_init(struct dvb_frontend *fe)
-{
-	int ret, i;
-	struct hd29l2_priv *priv = fe->demodulator_priv;
-	u8 tmp;
-	static const struct reg_val tab[] = {
-		{ 0x3a, 0x06 },
-		{ 0x3b, 0x03 },
-		{ 0x3c, 0x04 },
-		{ 0xaf, 0x06 },
-		{ 0xb0, 0x1b },
-		{ 0x80, 0x64 },
-		{ 0x10, 0x38 },
-	};
-
-	dbg("%s:", __func__);
-
-	/* reset demod */
-	/* it is recommended to HW reset chip using RST_N pin */
-	if (fe->callback) {
-		ret = fe->callback(fe, DVB_FRONTEND_COMPONENT_DEMOD, 0, 0);
-		if (ret)
-			goto err;
-
-		/* reprogramming needed because HW reset clears registers */
-		priv->tuner_i2c_addr_programmed = false;
-	}
-
-	/* init */
-	for (i = 0; i < ARRAY_SIZE(tab); i++) {
-		ret = hd29l2_wr_reg(priv, tab[i].reg, tab[i].val);
-		if (ret)
-			goto err;
-	}
-
-	/* TS params */
-	ret = hd29l2_rd_reg(priv, 0x36, &tmp);
-	if (ret)
-		goto err;
-
-	tmp &= 0x1b;
-	tmp |= priv->cfg.ts_mode;
-	ret = hd29l2_wr_reg(priv, 0x36, tmp);
-	if (ret)
-		goto err;
-
-	ret = hd29l2_rd_reg(priv, 0x31, &tmp);
-	tmp &= 0xef;
-
-	if (!(priv->cfg.ts_mode >> 7))
-		/* set b4 for serial TS */
-		tmp |= 0x10;
-
-	ret = hd29l2_wr_reg(priv, 0x31, tmp);
-	if (ret)
-		goto err;
-
-	return ret;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static void hd29l2_release(struct dvb_frontend *fe)
-{
-	struct hd29l2_priv *priv = fe->demodulator_priv;
-	kfree(priv);
-}
-
-static struct dvb_frontend_ops hd29l2_ops;
-
-struct dvb_frontend *hd29l2_attach(const struct hd29l2_config *config,
-	struct i2c_adapter *i2c)
-{
-	int ret;
-	struct hd29l2_priv *priv = NULL;
-	u8 tmp;
-
-	/* allocate memory for the internal state */
-	priv = kzalloc(sizeof(struct hd29l2_priv), GFP_KERNEL);
-	if (priv == NULL)
-		goto err;
-
-	/* setup the state */
-	priv->i2c = i2c;
-	memcpy(&priv->cfg, config, sizeof(struct hd29l2_config));
-
-
-	/* check if the demod is there */
-	ret = hd29l2_rd_reg(priv, 0x00, &tmp);
-	if (ret)
-		goto err;
-
-	/* create dvb_frontend */
-	memcpy(&priv->fe.ops, &hd29l2_ops, sizeof(struct dvb_frontend_ops));
-	priv->fe.demodulator_priv = priv;
-
-	return &priv->fe;
-err:
-	kfree(priv);
-	return NULL;
-}
-EXPORT_SYMBOL(hd29l2_attach);
-
-static struct dvb_frontend_ops hd29l2_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name = "HDIC HD29L2 DMB-TH",
-		.frequency_min = 474000000,
-		.frequency_max = 858000000,
-		.frequency_stepsize = 10000,
-		.caps = FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK |
-			FE_CAN_QAM_16 |
-			FE_CAN_QAM_32 |
-			FE_CAN_QAM_64 |
-			FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO |
-			FE_CAN_BANDWIDTH_AUTO |
-			FE_CAN_GUARD_INTERVAL_AUTO |
-			FE_CAN_HIERARCHY_AUTO |
-			FE_CAN_RECOVER
-	},
-
-	.release = hd29l2_release,
-
-	.init = hd29l2_init,
-
-	.get_frontend_algo = hd29l2_get_frontend_algo,
-	.search = hd29l2_search,
-	.get_frontend = hd29l2_get_frontend,
-
-	.read_status = hd29l2_read_status,
-	.read_snr = hd29l2_read_snr,
-	.read_signal_strength = hd29l2_read_signal_strength,
-	.read_ber = hd29l2_read_ber,
-	.read_ucblocks = hd29l2_read_ucblocks,
-
-	.i2c_gate_ctrl = hd29l2_i2c_gate_ctrl,
-};
-
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_DESCRIPTION("HDIC HD29L2 DMB-TH demodulator driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/hd29l2.h b/drivers/media/dvb/frontends/hd29l2.h
deleted file mode 100644
index a7a6443..0000000
--- a/drivers/media/dvb/frontends/hd29l2.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * HDIC HD29L2 DMB-TH demodulator driver
- *
- * Copyright (C) 2011 Metropolia University of Applied Sciences, Electria R&D
- *
- * Author: Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef HD29L2_H
-#define HD29L2_H
-
-#include <linux/dvb/frontend.h>
-
-struct hd29l2_config {
-	/*
-	 * demodulator I2C address
-	 */
-	u8 i2c_addr;
-
-	/*
-	 * tuner I2C address
-	 * only needed when tuner is behind demod I2C-gate
-	 */
-	u8 tuner_i2c_addr;
-
-	/*
-	 * TS settings
-	 */
-#define HD29L2_TS_SERIAL            0x00
-#define HD29L2_TS_PARALLEL          0x80
-#define HD29L2_TS_CLK_NORMAL        0x40
-#define HD29L2_TS_CLK_INVERTED      0x00
-#define HD29L2_TS_CLK_GATED         0x20
-#define HD29L2_TS_CLK_FREE          0x00
-	u8 ts_mode;
-};
-
-
-#if defined(CONFIG_DVB_HD29L2) || \
-	(defined(CONFIG_DVB_HD29L2_MODULE) && defined(MODULE))
-extern struct dvb_frontend *hd29l2_attach(const struct hd29l2_config *config,
-	struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *hd29l2_attach(
-const struct hd29l2_config *config, struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif /* HD29L2_H */
diff --git a/drivers/media/dvb/frontends/hd29l2_priv.h b/drivers/media/dvb/frontends/hd29l2_priv.h
deleted file mode 100644
index ba16dc3..0000000
--- a/drivers/media/dvb/frontends/hd29l2_priv.h
+++ /dev/null
@@ -1,314 +0,0 @@
-/*
- * HDIC HD29L2 DMB-TH demodulator driver
- *
- * Copyright (C) 2011 Metropolia University of Applied Sciences, Electria R&D
- *
- * Author: Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef HD29L2_PRIV
-#define HD29L2_PRIV
-
-#include <linux/dvb/version.h>
-#include "dvb_frontend.h"
-#include "dvb_math.h"
-#include "hd29l2.h"
-
-#define LOG_PREFIX "hd29l2"
-
-#undef dbg
-#define dbg(f, arg...) \
-	if (hd29l2_debug) \
-		printk(KERN_INFO   LOG_PREFIX": " f "\n" , ## arg)
-#undef err
-#define err(f, arg...)  printk(KERN_ERR     LOG_PREFIX": " f "\n" , ## arg)
-#undef info
-#define info(f, arg...) printk(KERN_INFO    LOG_PREFIX": " f "\n" , ## arg)
-#undef warn
-#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg)
-
-#define HD29L2_XTAL 30400000 /* Hz */
-
-
-#define HD29L2_QAM4NR 0x00
-#define HD29L2_QAM4   0x01
-#define HD29L2_QAM16  0x02
-#define HD29L2_QAM32  0x03
-#define HD29L2_QAM64  0x04
-
-#define HD29L2_CODE_RATE_04 0x00
-#define HD29L2_CODE_RATE_06 0x08
-#define HD29L2_CODE_RATE_08 0x10
-
-#define HD29L2_PN945 0x00
-#define HD29L2_PN595 0x01
-#define HD29L2_PN420 0x02
-
-#define HD29L2_CARRIER_SINGLE 0x00
-#define HD29L2_CARRIER_MULTI  0x01
-
-#define HD29L2_INTERLEAVER_720 0x00
-#define HD29L2_INTERLEAVER_420 0x01
-
-struct reg_val {
-	u8 reg;
-	u8 val;
-};
-
-struct reg_mod_vals {
-	u8 reg;
-	u8 val[5];
-};
-
-struct hd29l2_priv {
-	struct i2c_adapter *i2c;
-	struct dvb_frontend fe;
-	struct hd29l2_config cfg;
-	u8 tuner_i2c_addr_programmed:1;
-
-	fe_status_t fe_status;
-};
-
-static const struct reg_mod_vals reg_mod_vals_tab[] = {
-	/* REG, QAM4NR, QAM4,QAM16,QAM32,QAM64 */
-	{ 0x01, { 0x10, 0x10, 0x10, 0x10, 0x10 } },
-	{ 0x02, { 0x07, 0x07, 0x07, 0x07, 0x07 } },
-	{ 0x03, { 0x10, 0x10, 0x10, 0x10, 0x10 } },
-	{ 0x04, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0x05, { 0x61, 0x60, 0x60, 0x61, 0x60 } },
-	{ 0x06, { 0xff, 0xff, 0xff, 0xff, 0xff } },
-	{ 0x07, { 0xff, 0xff, 0xff, 0xff, 0xff } },
-	{ 0x08, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0x09, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0x0a, { 0x15, 0x15, 0x03, 0x03, 0x03 } },
-	{ 0x0d, { 0x78, 0x78, 0x88, 0x78, 0x78 } },
-	{ 0x0e, { 0xa0, 0x90, 0xa0, 0xa0, 0xa0 } },
-	{ 0x0f, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0x10, { 0xa0, 0xa0, 0x58, 0x38, 0x38 } },
-	{ 0x11, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0x12, { 0x5a, 0x5a, 0x5a, 0x5a, 0x5a } },
-	{ 0x13, { 0xa2, 0xa2, 0xa2, 0xa2, 0xa2 } },
-	{ 0x17, { 0x40, 0x40, 0x40, 0x40, 0x40 } },
-	{ 0x18, { 0x21, 0x21, 0x42, 0x52, 0x42 } },
-	{ 0x19, { 0x21, 0x21, 0x62, 0x72, 0x62 } },
-	{ 0x1a, { 0x32, 0x43, 0xa9, 0xb9, 0xa9 } },
-	{ 0x1b, { 0x32, 0x43, 0xb9, 0xd8, 0xb9 } },
-	{ 0x1c, { 0x02, 0x02, 0x03, 0x02, 0x03 } },
-	{ 0x1d, { 0x0c, 0x0c, 0x01, 0x02, 0x02 } },
-	{ 0x1e, { 0x02, 0x02, 0x02, 0x01, 0x02 } },
-	{ 0x1f, { 0x02, 0x02, 0x01, 0x02, 0x04 } },
-	{ 0x20, { 0x01, 0x02, 0x01, 0x01, 0x01 } },
-	{ 0x21, { 0x08, 0x08, 0x0a, 0x0a, 0x0a } },
-	{ 0x22, { 0x06, 0x06, 0x04, 0x05, 0x05 } },
-	{ 0x23, { 0x06, 0x06, 0x05, 0x03, 0x05 } },
-	{ 0x24, { 0x08, 0x08, 0x05, 0x07, 0x07 } },
-	{ 0x25, { 0x16, 0x10, 0x10, 0x0a, 0x10 } },
-	{ 0x26, { 0x14, 0x14, 0x04, 0x04, 0x04 } },
-	{ 0x27, { 0x58, 0x58, 0x58, 0x5c, 0x58 } },
-	{ 0x28, { 0x0a, 0x0a, 0x0a, 0x0a, 0x0a } },
-	{ 0x29, { 0x0a, 0x0a, 0x0a, 0x0a, 0x0a } },
-	{ 0x2a, { 0x08, 0x0a, 0x08, 0x08, 0x08 } },
-	{ 0x2b, { 0x08, 0x08, 0x08, 0x08, 0x08 } },
-	{ 0x2c, { 0x06, 0x06, 0x06, 0x06, 0x06 } },
-	{ 0x2d, { 0x05, 0x06, 0x06, 0x06, 0x06 } },
-	{ 0x2e, { 0x21, 0x21, 0x21, 0x21, 0x21 } },
-	{ 0x2f, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0x30, { 0x14, 0x14, 0x14, 0x14, 0x14 } },
-	{ 0x33, { 0xb7, 0xb7, 0xb7, 0xb7, 0xb7 } },
-	{ 0x34, { 0x81, 0x81, 0x81, 0x81, 0x81 } },
-	{ 0x35, { 0x80, 0x80, 0x80, 0x80, 0x80 } },
-	{ 0x37, { 0x70, 0x70, 0x70, 0x70, 0x70 } },
-	{ 0x38, { 0x04, 0x04, 0x02, 0x02, 0x02 } },
-	{ 0x39, { 0x07, 0x07, 0x05, 0x05, 0x05 } },
-	{ 0x3a, { 0x06, 0x06, 0x06, 0x06, 0x06 } },
-	{ 0x3b, { 0x03, 0x03, 0x03, 0x03, 0x03 } },
-	{ 0x3c, { 0x07, 0x06, 0x04, 0x04, 0x04 } },
-	{ 0x3d, { 0xf0, 0xf0, 0xf0, 0xf0, 0x80 } },
-	{ 0x3e, { 0x60, 0x60, 0x60, 0x60, 0xff } },
-	{ 0x3f, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0x40, { 0x5b, 0x5b, 0x5b, 0x57, 0x50 } },
-	{ 0x41, { 0x30, 0x30, 0x30, 0x30, 0x18 } },
-	{ 0x42, { 0x20, 0x20, 0x20, 0x00, 0x30 } },
-	{ 0x43, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0x44, { 0x3f, 0x3f, 0x3f, 0x3f, 0x3f } },
-	{ 0x45, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0x46, { 0x0a, 0x0a, 0x0a, 0x0a, 0x0a } },
-	{ 0x47, { 0x00, 0x00, 0x95, 0x00, 0x95 } },
-	{ 0x48, { 0xc0, 0xc0, 0xc0, 0xc0, 0xc0 } },
-	{ 0x49, { 0xc0, 0xc0, 0xc0, 0xc0, 0xc0 } },
-	{ 0x4a, { 0x40, 0x40, 0x33, 0x11, 0x11 } },
-	{ 0x4b, { 0x40, 0x40, 0x00, 0x00, 0x00 } },
-	{ 0x4c, { 0x40, 0x40, 0x99, 0x11, 0x11 } },
-	{ 0x4d, { 0x40, 0x40, 0x00, 0x00, 0x00 } },
-	{ 0x4e, { 0x40, 0x40, 0x66, 0x77, 0x77 } },
-	{ 0x4f, { 0x40, 0x40, 0x00, 0x00, 0x00 } },
-	{ 0x50, { 0x40, 0x40, 0x88, 0x33, 0x11 } },
-	{ 0x51, { 0x40, 0x40, 0x00, 0x00, 0x00 } },
-	{ 0x52, { 0x40, 0x40, 0x88, 0x02, 0x02 } },
-	{ 0x53, { 0x40, 0x40, 0x00, 0x02, 0x02 } },
-	{ 0x54, { 0x00, 0x00, 0x88, 0x33, 0x33 } },
-	{ 0x55, { 0x40, 0x40, 0x00, 0x00, 0x00 } },
-	{ 0x56, { 0x00, 0x00, 0x00, 0x0b, 0x00 } },
-	{ 0x57, { 0x40, 0x40, 0x0a, 0x0b, 0x0a } },
-	{ 0x58, { 0xaa, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0x59, { 0x7a, 0x40, 0x02, 0x02, 0x02 } },
-	{ 0x5a, { 0x18, 0x18, 0x01, 0x01, 0x01 } },
-	{ 0x5b, { 0x18, 0x18, 0x01, 0x01, 0x01 } },
-	{ 0x5c, { 0x18, 0x18, 0x01, 0x01, 0x01 } },
-	{ 0x5d, { 0x18, 0x18, 0x01, 0x01, 0x01 } },
-	{ 0x5e, { 0xc0, 0xc0, 0xc0, 0xff, 0xc0 } },
-	{ 0x5f, { 0xc0, 0xc0, 0xc0, 0xff, 0xc0 } },
-	{ 0x60, { 0x40, 0x40, 0x00, 0x30, 0x30 } },
-	{ 0x61, { 0x40, 0x40, 0x10, 0x30, 0x30 } },
-	{ 0x62, { 0x40, 0x40, 0x00, 0x30, 0x30 } },
-	{ 0x63, { 0x40, 0x40, 0x05, 0x30, 0x30 } },
-	{ 0x64, { 0x40, 0x40, 0x06, 0x00, 0x30 } },
-	{ 0x65, { 0x40, 0x40, 0x06, 0x08, 0x30 } },
-	{ 0x66, { 0x40, 0x40, 0x00, 0x00, 0x20 } },
-	{ 0x67, { 0x40, 0x40, 0x01, 0x04, 0x20 } },
-	{ 0x68, { 0x00, 0x00, 0x30, 0x00, 0x20 } },
-	{ 0x69, { 0xa0, 0xa0, 0x00, 0x08, 0x20 } },
-	{ 0x6a, { 0x00, 0x00, 0x30, 0x00, 0x25 } },
-	{ 0x6b, { 0xa0, 0xa0, 0x00, 0x06, 0x25 } },
-	{ 0x6c, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0x6d, { 0xa0, 0x60, 0x0c, 0x03, 0x0c } },
-	{ 0x6e, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0x6f, { 0xa0, 0x60, 0x04, 0x01, 0x04 } },
-	{ 0x70, { 0x58, 0x58, 0xaa, 0xaa, 0xaa } },
-	{ 0x71, { 0x58, 0x58, 0xaa, 0xaa, 0xaa } },
-	{ 0x72, { 0x58, 0x58, 0xff, 0xff, 0xff } },
-	{ 0x73, { 0x58, 0x58, 0xff, 0xff, 0xff } },
-	{ 0x74, { 0x06, 0x06, 0x09, 0x05, 0x05 } },
-	{ 0x75, { 0x06, 0x06, 0x0a, 0x10, 0x10 } },
-	{ 0x76, { 0x10, 0x10, 0x06, 0x0a, 0x0a } },
-	{ 0x77, { 0x12, 0x18, 0x28, 0x10, 0x28 } },
-	{ 0x78, { 0xf8, 0xf8, 0xf8, 0xf8, 0xf8 } },
-	{ 0x79, { 0x15, 0x15, 0x03, 0x03, 0x03 } },
-	{ 0x7a, { 0x02, 0x02, 0x01, 0x04, 0x03 } },
-	{ 0x7b, { 0x01, 0x02, 0x03, 0x03, 0x03 } },
-	{ 0x7c, { 0x28, 0x28, 0x28, 0x28, 0x28 } },
-	{ 0x7f, { 0x25, 0x92, 0x5f, 0x17, 0x2d } },
-	{ 0x80, { 0x64, 0x64, 0x64, 0x74, 0x64 } },
-	{ 0x83, { 0x06, 0x03, 0x04, 0x04, 0x04 } },
-	{ 0x84, { 0xff, 0xff, 0xff, 0xff, 0xff } },
-	{ 0x85, { 0x05, 0x05, 0x05, 0x05, 0x05 } },
-	{ 0x86, { 0x00, 0x00, 0x11, 0x11, 0x11 } },
-	{ 0x87, { 0x03, 0x03, 0x03, 0x03, 0x03 } },
-	{ 0x88, { 0x09, 0x09, 0x09, 0x09, 0x09 } },
-	{ 0x89, { 0x20, 0x20, 0x30, 0x20, 0x20 } },
-	{ 0x8a, { 0x03, 0x03, 0x02, 0x03, 0x02 } },
-	{ 0x8b, { 0x00, 0x07, 0x09, 0x00, 0x09 } },
-	{ 0x8c, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0x8d, { 0x4f, 0x4f, 0x4f, 0x3f, 0x4f } },
-	{ 0x8e, { 0xf0, 0xf0, 0x60, 0xf0, 0xa0 } },
-	{ 0x8f, { 0xe8, 0xe8, 0xe8, 0xe8, 0xe8 } },
-	{ 0x90, { 0x10, 0x10, 0x10, 0x10, 0x10 } },
-	{ 0x91, { 0x40, 0x40, 0x70, 0x70, 0x10 } },
-	{ 0x92, { 0x00, 0x00, 0x00, 0x00, 0x04 } },
-	{ 0x93, { 0x60, 0x60, 0x60, 0x60, 0x60 } },
-	{ 0x94, { 0x00, 0x00, 0x00, 0x00, 0x03 } },
-	{ 0x95, { 0x09, 0x09, 0x47, 0x47, 0x47 } },
-	{ 0x96, { 0x80, 0xa0, 0xa0, 0x40, 0xa0 } },
-	{ 0x97, { 0x60, 0x60, 0x60, 0x60, 0x60 } },
-	{ 0x98, { 0x50, 0x50, 0x50, 0x30, 0x50 } },
-	{ 0x99, { 0x10, 0x10, 0x10, 0x10, 0x10 } },
-	{ 0x9a, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0x9b, { 0x40, 0x40, 0x40, 0x30, 0x40 } },
-	{ 0x9c, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xa0, { 0xf0, 0xf0, 0xf0, 0xf0, 0xf0 } },
-	{ 0xa1, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xa2, { 0x30, 0x30, 0x00, 0x30, 0x00 } },
-	{ 0xa3, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xa4, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xa5, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xa6, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xa7, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xa8, { 0x77, 0x77, 0x77, 0x77, 0x77 } },
-	{ 0xa9, { 0x02, 0x02, 0x02, 0x02, 0x02 } },
-	{ 0xaa, { 0x40, 0x40, 0x40, 0x40, 0x40 } },
-	{ 0xac, { 0x1f, 0x1f, 0x1f, 0x1f, 0x1f } },
-	{ 0xad, { 0x14, 0x14, 0x14, 0x14, 0x14 } },
-	{ 0xae, { 0x78, 0x78, 0x78, 0x78, 0x78 } },
-	{ 0xaf, { 0x06, 0x06, 0x06, 0x06, 0x07 } },
-	{ 0xb0, { 0x1b, 0x1b, 0x1b, 0x19, 0x1b } },
-	{ 0xb1, { 0x18, 0x17, 0x17, 0x18, 0x17 } },
-	{ 0xb2, { 0x35, 0x82, 0x82, 0x38, 0x82 } },
-	{ 0xb3, { 0xb6, 0xce, 0xc7, 0x5c, 0xb0 } },
-	{ 0xb4, { 0x3f, 0x3e, 0x3e, 0x3f, 0x3e } },
-	{ 0xb5, { 0x70, 0x58, 0x50, 0x68, 0x50 } },
-	{ 0xb6, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xb7, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xb8, { 0x03, 0x03, 0x01, 0x01, 0x01 } },
-	{ 0xb9, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xba, { 0x06, 0x06, 0x0a, 0x05, 0x0a } },
-	{ 0xbb, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xbc, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xbd, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xbe, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xbf, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xc0, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xc1, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xc2, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xc3, { 0x00, 0x00, 0x88, 0x66, 0x88 } },
-	{ 0xc4, { 0x10, 0x10, 0x00, 0x00, 0x00 } },
-	{ 0xc5, { 0x00, 0x00, 0x44, 0x60, 0x44 } },
-	{ 0xc6, { 0x10, 0x0a, 0x00, 0x00, 0x00 } },
-	{ 0xc7, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xc8, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xc9, { 0x90, 0x04, 0x00, 0x00, 0x00 } },
-	{ 0xca, { 0x90, 0x08, 0x01, 0x01, 0x01 } },
-	{ 0xcb, { 0xa0, 0x04, 0x00, 0x44, 0x00 } },
-	{ 0xcc, { 0xa0, 0x10, 0x03, 0x00, 0x03 } },
-	{ 0xcd, { 0x06, 0x06, 0x06, 0x05, 0x06 } },
-	{ 0xce, { 0x05, 0x05, 0x01, 0x01, 0x01 } },
-	{ 0xcf, { 0x40, 0x20, 0x18, 0x18, 0x18 } },
-	{ 0xd0, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xd1, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xd2, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xd3, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xd4, { 0x05, 0x05, 0x05, 0x05, 0x05 } },
-	{ 0xd5, { 0x05, 0x05, 0x05, 0x03, 0x05 } },
-	{ 0xd6, { 0xac, 0x22, 0xca, 0x8f, 0xca } },
-	{ 0xd7, { 0x20, 0x20, 0x20, 0x20, 0x20 } },
-	{ 0xd8, { 0x01, 0x01, 0x01, 0x01, 0x01 } },
-	{ 0xd9, { 0x00, 0x00, 0x0f, 0x00, 0x0f } },
-	{ 0xda, { 0x00, 0xff, 0xff, 0x0e, 0xff } },
-	{ 0xdb, { 0x0a, 0x0a, 0x0a, 0x0a, 0x0a } },
-	{ 0xdc, { 0x0a, 0x0a, 0x0a, 0x0a, 0x0a } },
-	{ 0xdd, { 0x05, 0x05, 0x05, 0x05, 0x05 } },
-	{ 0xde, { 0x0a, 0x0a, 0x0a, 0x0a, 0x0a } },
-	{ 0xdf, { 0x42, 0x42, 0x44, 0x44, 0x04 } },
-	{ 0xe0, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xe1, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xe2, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xe3, { 0x00, 0x00, 0x26, 0x06, 0x26 } },
-	{ 0xe4, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xe5, { 0x01, 0x0a, 0x01, 0x01, 0x01 } },
-	{ 0xe6, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xe7, { 0x08, 0x08, 0x08, 0x08, 0x08 } },
-	{ 0xe8, { 0x63, 0x63, 0x63, 0x63, 0x63 } },
-	{ 0xe9, { 0x59, 0x59, 0x59, 0x59, 0x59 } },
-	{ 0xea, { 0x80, 0x80, 0x20, 0x80, 0x80 } },
-	{ 0xeb, { 0x37, 0x37, 0x78, 0x37, 0x77 } },
-	{ 0xec, { 0x1f, 0x1f, 0x25, 0x25, 0x25 } },
-	{ 0xed, { 0x0a, 0x0a, 0x0a, 0x0a, 0x0a } },
-	{ 0xee, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	{ 0xef, { 0x70, 0x70, 0x58, 0x38, 0x58 } },
-	{ 0xf0, { 0x00, 0x00, 0x00, 0x00, 0x00 } },
-};
-
-#endif /* HD29L2_PRIV */
diff --git a/drivers/media/dvb/frontends/isl6405.c b/drivers/media/dvb/frontends/isl6405.c
deleted file mode 100644
index 33d33f4..0000000
--- a/drivers/media/dvb/frontends/isl6405.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * isl6405.c - driver for dual lnb supply and control ic ISL6405
- *
- * Copyright (C) 2008 Hartmut Hackmann
- * Copyright (C) 2006 Oliver Endriss
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org
- */
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "isl6405.h"
-
-struct isl6405 {
-	u8			config;
-	u8			override_or;
-	u8			override_and;
-	struct i2c_adapter	*i2c;
-	u8			i2c_addr;
-};
-
-static int isl6405_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-{
-	struct isl6405 *isl6405 = (struct isl6405 *) fe->sec_priv;
-	struct i2c_msg msg = {	.addr = isl6405->i2c_addr, .flags = 0,
-				.buf = &isl6405->config,
-				.len = sizeof(isl6405->config) };
-
-	if (isl6405->override_or & 0x80) {
-		isl6405->config &= ~(ISL6405_VSEL2 | ISL6405_EN2);
-		switch (voltage) {
-		case SEC_VOLTAGE_OFF:
-			break;
-		case SEC_VOLTAGE_13:
-			isl6405->config |= ISL6405_EN2;
-			break;
-		case SEC_VOLTAGE_18:
-			isl6405->config |= (ISL6405_EN2 | ISL6405_VSEL2);
-			break;
-		default:
-			return -EINVAL;
-		}
-	} else {
-		isl6405->config &= ~(ISL6405_VSEL1 | ISL6405_EN1);
-		switch (voltage) {
-		case SEC_VOLTAGE_OFF:
-			break;
-		case SEC_VOLTAGE_13:
-			isl6405->config |= ISL6405_EN1;
-			break;
-		case SEC_VOLTAGE_18:
-			isl6405->config |= (ISL6405_EN1 | ISL6405_VSEL1);
-			break;
-		default:
-			return -EINVAL;
-		};
-	}
-	isl6405->config |= isl6405->override_or;
-	isl6405->config &= isl6405->override_and;
-
-	return (i2c_transfer(isl6405->i2c, &msg, 1) == 1) ? 0 : -EIO;
-}
-
-static int isl6405_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg)
-{
-	struct isl6405 *isl6405 = (struct isl6405 *) fe->sec_priv;
-	struct i2c_msg msg = {	.addr = isl6405->i2c_addr, .flags = 0,
-				.buf = &isl6405->config,
-				.len = sizeof(isl6405->config) };
-
-	if (isl6405->override_or & 0x80) {
-		if (arg)
-			isl6405->config |= ISL6405_LLC2;
-		else
-			isl6405->config &= ~ISL6405_LLC2;
-	} else {
-		if (arg)
-			isl6405->config |= ISL6405_LLC1;
-		else
-			isl6405->config &= ~ISL6405_LLC1;
-	}
-	isl6405->config |= isl6405->override_or;
-	isl6405->config &= isl6405->override_and;
-
-	return (i2c_transfer(isl6405->i2c, &msg, 1) == 1) ? 0 : -EIO;
-}
-
-static void isl6405_release(struct dvb_frontend *fe)
-{
-	/* power off */
-	isl6405_set_voltage(fe, SEC_VOLTAGE_OFF);
-
-	/* free */
-	kfree(fe->sec_priv);
-	fe->sec_priv = NULL;
-}
-
-struct dvb_frontend *isl6405_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c,
-				    u8 i2c_addr, u8 override_set, u8 override_clear)
-{
-	struct isl6405 *isl6405 = kmalloc(sizeof(struct isl6405), GFP_KERNEL);
-	if (!isl6405)
-		return NULL;
-
-	/* default configuration */
-	if (override_set & 0x80)
-		isl6405->config = ISL6405_ISEL2;
-	else
-		isl6405->config = ISL6405_ISEL1;
-	isl6405->i2c = i2c;
-	isl6405->i2c_addr = i2c_addr;
-	fe->sec_priv = isl6405;
-
-	/* bits which should be forced to '1' */
-	isl6405->override_or = override_set;
-
-	/* bits which should be forced to '0' */
-	isl6405->override_and = ~override_clear;
-
-	/* detect if it is present or not */
-	if (isl6405_set_voltage(fe, SEC_VOLTAGE_OFF)) {
-		kfree(isl6405);
-		fe->sec_priv = NULL;
-		return NULL;
-	}
-
-	/* install release callback */
-	fe->ops.release_sec = isl6405_release;
-
-	/* override frontend ops */
-	fe->ops.set_voltage = isl6405_set_voltage;
-	fe->ops.enable_high_lnb_voltage = isl6405_enable_high_lnb_voltage;
-
-	return fe;
-}
-EXPORT_SYMBOL(isl6405_attach);
-
-MODULE_DESCRIPTION("Driver for lnb supply and control ic isl6405");
-MODULE_AUTHOR("Hartmut Hackmann & Oliver Endriss");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/isl6405.h b/drivers/media/dvb/frontends/isl6405.h
deleted file mode 100644
index 1c793d3..0000000
--- a/drivers/media/dvb/frontends/isl6405.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * isl6405.h - driver for dual lnb supply and control ic ISL6405
- *
- * Copyright (C) 2008 Hartmut Hackmann
- * Copyright (C) 2006 Oliver Endriss
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org
- */
-
-#ifndef _ISL6405_H
-#define _ISL6405_H
-
-#include <linux/dvb/frontend.h>
-
-/* system register bits */
-
-/* this bit selects register (control) 1 or 2
-   note that the bit maps are different */
-
-#define ISL6405_SR	0x80
-
-/* SR = 0 */
-#define ISL6405_OLF1	0x01
-#define ISL6405_EN1	0x02
-#define ISL6405_VSEL1	0x04
-#define ISL6405_LLC1	0x08
-#define ISL6405_ENT1	0x10
-#define ISL6405_ISEL1	0x20
-#define ISL6405_DCL	0x40
-
-/* SR = 1 */
-#define ISL6405_OLF2	0x01
-#define ISL6405_OTF	0x02
-#define ISL6405_EN2	0x04
-#define ISL6405_VSEL2	0x08
-#define ISL6405_LLC2	0x10
-#define ISL6405_ENT2	0x20
-#define ISL6405_ISEL2	0x40
-
-#if defined(CONFIG_DVB_ISL6405) || (defined(CONFIG_DVB_ISL6405_MODULE) && defined(MODULE))
-/* override_set and override_clear control which system register bits (above)
- * to always set & clear
- */
-extern struct dvb_frontend *isl6405_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c,
-					   u8 i2c_addr, u8 override_set, u8 override_clear);
-#else
-static inline struct dvb_frontend *isl6405_attach(struct dvb_frontend *fe,
-						  struct i2c_adapter *i2c, u8 i2c_addr,
-						  u8 override_set, u8 override_clear)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_ISL6405 */
-
-#endif
diff --git a/drivers/media/dvb/frontends/isl6421.c b/drivers/media/dvb/frontends/isl6421.c
deleted file mode 100644
index 684c8ec..0000000
--- a/drivers/media/dvb/frontends/isl6421.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * isl6421.h - driver for lnb supply and control ic ISL6421
- *
- * Copyright (C) 2006 Andrew de Quincey
- * Copyright (C) 2006 Oliver Endriss
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org
- */
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "isl6421.h"
-
-struct isl6421 {
-	u8			config;
-	u8			override_or;
-	u8			override_and;
-	struct i2c_adapter	*i2c;
-	u8			i2c_addr;
-};
-
-static int isl6421_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-{
-	struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv;
-	struct i2c_msg msg = {	.addr = isl6421->i2c_addr, .flags = 0,
-				.buf = &isl6421->config,
-				.len = sizeof(isl6421->config) };
-
-	isl6421->config &= ~(ISL6421_VSEL1 | ISL6421_EN1);
-
-	switch(voltage) {
-	case SEC_VOLTAGE_OFF:
-		break;
-	case SEC_VOLTAGE_13:
-		isl6421->config |= ISL6421_EN1;
-		break;
-	case SEC_VOLTAGE_18:
-		isl6421->config |= (ISL6421_EN1 | ISL6421_VSEL1);
-		break;
-	default:
-		return -EINVAL;
-	};
-
-	isl6421->config |= isl6421->override_or;
-	isl6421->config &= isl6421->override_and;
-
-	return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO;
-}
-
-static int isl6421_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg)
-{
-	struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv;
-	struct i2c_msg msg = {	.addr = isl6421->i2c_addr, .flags = 0,
-				.buf = &isl6421->config,
-				.len = sizeof(isl6421->config) };
-
-	if (arg)
-		isl6421->config |= ISL6421_LLC1;
-	else
-		isl6421->config &= ~ISL6421_LLC1;
-
-	isl6421->config |= isl6421->override_or;
-	isl6421->config &= isl6421->override_and;
-
-	return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO;
-}
-
-static void isl6421_release(struct dvb_frontend *fe)
-{
-	/* power off */
-	isl6421_set_voltage(fe, SEC_VOLTAGE_OFF);
-
-	/* free */
-	kfree(fe->sec_priv);
-	fe->sec_priv = NULL;
-}
-
-struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr,
-		   u8 override_set, u8 override_clear)
-{
-	struct isl6421 *isl6421 = kmalloc(sizeof(struct isl6421), GFP_KERNEL);
-	if (!isl6421)
-		return NULL;
-
-	/* default configuration */
-	isl6421->config = ISL6421_ISEL1;
-	isl6421->i2c = i2c;
-	isl6421->i2c_addr = i2c_addr;
-	fe->sec_priv = isl6421;
-
-	/* bits which should be forced to '1' */
-	isl6421->override_or = override_set;
-
-	/* bits which should be forced to '0' */
-	isl6421->override_and = ~override_clear;
-
-	/* detect if it is present or not */
-	if (isl6421_set_voltage(fe, SEC_VOLTAGE_OFF)) {
-		kfree(isl6421);
-		fe->sec_priv = NULL;
-		return NULL;
-	}
-
-	/* install release callback */
-	fe->ops.release_sec = isl6421_release;
-
-	/* override frontend ops */
-	fe->ops.set_voltage = isl6421_set_voltage;
-	fe->ops.enable_high_lnb_voltage = isl6421_enable_high_lnb_voltage;
-
-	return fe;
-}
-EXPORT_SYMBOL(isl6421_attach);
-
-MODULE_DESCRIPTION("Driver for lnb supply and control ic isl6421");
-MODULE_AUTHOR("Andrew de Quincey & Oliver Endriss");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/isl6421.h b/drivers/media/dvb/frontends/isl6421.h
deleted file mode 100644
index 47e4518..0000000
--- a/drivers/media/dvb/frontends/isl6421.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * isl6421.h - driver for lnb supply and control ic ISL6421
- *
- * Copyright (C) 2006 Andrew de Quincey
- * Copyright (C) 2006 Oliver Endriss
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org
- */
-
-#ifndef _ISL6421_H
-#define _ISL6421_H
-
-#include <linux/dvb/frontend.h>
-
-/* system register bits */
-#define ISL6421_OLF1	0x01
-#define ISL6421_EN1	0x02
-#define ISL6421_VSEL1	0x04
-#define ISL6421_LLC1	0x08
-#define ISL6421_ENT1	0x10
-#define ISL6421_ISEL1	0x20
-#define ISL6421_DCL	0x40
-
-#if defined(CONFIG_DVB_ISL6421) || (defined(CONFIG_DVB_ISL6421_MODULE) && defined(MODULE))
-/* override_set and override_clear control which system register bits (above) to always set & clear */
-extern struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr,
-			  u8 override_set, u8 override_clear);
-#else
-static inline struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr,
-						  u8 override_set, u8 override_clear)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_ISL6421
-
-#endif
diff --git a/drivers/media/dvb/frontends/isl6423.c b/drivers/media/dvb/frontends/isl6423.c
deleted file mode 100644
index dca5beb..0000000
--- a/drivers/media/dvb/frontends/isl6423.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
-	Intersil ISL6423 SEC and LNB Power supply controller
-
-	Copyright (C) Manu Abraham <abraham.manu@gmail.com>
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "isl6423.h"
-
-static unsigned int verbose;
-module_param(verbose, int, 0644);
-MODULE_PARM_DESC(verbose, "Set Verbosity level");
-
-#define FE_ERROR				0
-#define FE_NOTICE				1
-#define FE_INFO					2
-#define FE_DEBUG				3
-#define FE_DEBUGREG				4
-
-#define dprintk(__y, __z, format, arg...) do {						\
-	if (__z) {									\
-		if	((verbose > FE_ERROR) && (verbose > __y))			\
-			printk(KERN_ERR "%s: " format "\n", __func__ , ##arg);		\
-		else if	((verbose > FE_NOTICE) && (verbose > __y))			\
-			printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg);	\
-		else if ((verbose > FE_INFO) && (verbose > __y))			\
-			printk(KERN_INFO "%s: " format "\n", __func__ , ##arg);		\
-		else if ((verbose > FE_DEBUG) && (verbose > __y))			\
-			printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg);	\
-	} else {									\
-		if (verbose > __y)							\
-			printk(format, ##arg);						\
-	}										\
-} while (0)
-
-struct isl6423_dev {
-	const struct isl6423_config	*config;
-	struct i2c_adapter		*i2c;
-
-	u8 reg_3;
-	u8 reg_4;
-
-	unsigned int verbose;
-};
-
-static int isl6423_write(struct isl6423_dev *isl6423, u8 reg)
-{
-	struct i2c_adapter *i2c = isl6423->i2c;
-	u8 addr			= isl6423->config->addr;
-	int err = 0;
-
-	struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = &reg, .len = 1 };
-
-	dprintk(FE_DEBUG, 1, "write reg %02X", reg);
-	err = i2c_transfer(i2c, &msg, 1);
-	if (err < 0)
-		goto exit;
-	return 0;
-
-exit:
-	dprintk(FE_ERROR, 1, "I/O error <%d>", err);
-	return err;
-}
-
-static int isl6423_set_modulation(struct dvb_frontend *fe)
-{
-	struct isl6423_dev *isl6423		= (struct isl6423_dev *) fe->sec_priv;
-	const struct isl6423_config *config	= isl6423->config;
-	int err = 0;
-	u8 reg_2 = 0;
-
-	reg_2 = 0x01 << 5;
-
-	if (config->mod_extern)
-		reg_2 |= (1 << 3);
-	else
-		reg_2 |= (1 << 4);
-
-	err = isl6423_write(isl6423, reg_2);
-	if (err < 0)
-		goto exit;
-	return 0;
-
-exit:
-	dprintk(FE_ERROR, 1, "I/O error <%d>", err);
-	return err;
-}
-
-static int isl6423_voltage_boost(struct dvb_frontend *fe, long arg)
-{
-	struct isl6423_dev *isl6423 = (struct isl6423_dev *) fe->sec_priv;
-	u8 reg_3 = isl6423->reg_3;
-	u8 reg_4 = isl6423->reg_4;
-	int err = 0;
-
-	if (arg) {
-		/* EN = 1, VSPEN = 1, VBOT = 1 */
-		reg_4 |= (1 << 4);
-		reg_4 |= 0x1;
-		reg_3 |= (1 << 3);
-	} else {
-		/* EN = 1, VSPEN = 1, VBOT = 0 */
-		reg_4 |= (1 << 4);
-		reg_4 &= ~0x1;
-		reg_3 |= (1 << 3);
-	}
-	err = isl6423_write(isl6423, reg_3);
-	if (err < 0)
-		goto exit;
-
-	err = isl6423_write(isl6423, reg_4);
-	if (err < 0)
-		goto exit;
-
-	isl6423->reg_3 = reg_3;
-	isl6423->reg_4 = reg_4;
-
-	return 0;
-exit:
-	dprintk(FE_ERROR, 1, "I/O error <%d>", err);
-	return err;
-}
-
-
-static int isl6423_set_voltage(struct dvb_frontend *fe,
-			       enum fe_sec_voltage voltage)
-{
-	struct isl6423_dev *isl6423 = (struct isl6423_dev *) fe->sec_priv;
-	u8 reg_3 = isl6423->reg_3;
-	u8 reg_4 = isl6423->reg_4;
-	int err = 0;
-
-	switch (voltage) {
-	case SEC_VOLTAGE_OFF:
-		/* EN = 0 */
-		reg_4 &= ~(1 << 4);
-		break;
-
-	case SEC_VOLTAGE_13:
-		/* EN = 1, VSPEN = 1, VTOP = 0, VBOT = 0 */
-		reg_4 |= (1 << 4);
-		reg_4 &= ~0x3;
-		reg_3 |= (1 << 3);
-		break;
-
-	case SEC_VOLTAGE_18:
-		/* EN = 1, VSPEN = 1, VTOP = 1, VBOT = 0 */
-		reg_4 |= (1 << 4);
-		reg_4 |=  0x2;
-		reg_4 &= ~0x1;
-		reg_3 |= (1 << 3);
-		break;
-
-	default:
-		break;
-	}
-	err = isl6423_write(isl6423, reg_3);
-	if (err < 0)
-		goto exit;
-
-	err = isl6423_write(isl6423, reg_4);
-	if (err < 0)
-		goto exit;
-
-	isl6423->reg_3 = reg_3;
-	isl6423->reg_4 = reg_4;
-
-	return 0;
-exit:
-	dprintk(FE_ERROR, 1, "I/O error <%d>", err);
-	return err;
-}
-
-static int isl6423_set_current(struct dvb_frontend *fe)
-{
-	struct isl6423_dev *isl6423		= (struct isl6423_dev *) fe->sec_priv;
-	u8 reg_3 = isl6423->reg_3;
-	const struct isl6423_config *config	= isl6423->config;
-	int err = 0;
-
-	switch (config->current_max) {
-	case SEC_CURRENT_275m:
-		/* 275mA */
-		/* ISELH = 0, ISELL = 0 */
-		reg_3 &= ~0x3;
-		break;
-
-	case SEC_CURRENT_515m:
-		/* 515mA */
-		/* ISELH = 0, ISELL = 1 */
-		reg_3 &= ~0x2;
-		reg_3 |=  0x1;
-		break;
-
-	case SEC_CURRENT_635m:
-		/* 635mA */
-		/* ISELH = 1, ISELL = 0 */
-		reg_3 &= ~0x1;
-		reg_3 |=  0x2;
-		break;
-
-	case SEC_CURRENT_800m:
-		/* 800mA */
-		/* ISELH = 1, ISELL = 1 */
-		reg_3 |= 0x3;
-		break;
-	}
-
-	err = isl6423_write(isl6423, reg_3);
-	if (err < 0)
-		goto exit;
-
-	switch (config->curlim) {
-	case SEC_CURRENT_LIM_ON:
-		/* DCL = 0 */
-		reg_3 &= ~0x10;
-		break;
-
-	case SEC_CURRENT_LIM_OFF:
-		/* DCL = 1 */
-		reg_3 |= 0x10;
-		break;
-	}
-
-	err = isl6423_write(isl6423, reg_3);
-	if (err < 0)
-		goto exit;
-
-	isl6423->reg_3 = reg_3;
-
-	return 0;
-exit:
-	dprintk(FE_ERROR, 1, "I/O error <%d>", err);
-	return err;
-}
-
-static void isl6423_release(struct dvb_frontend *fe)
-{
-	isl6423_set_voltage(fe, SEC_VOLTAGE_OFF);
-
-	kfree(fe->sec_priv);
-	fe->sec_priv = NULL;
-}
-
-struct dvb_frontend *isl6423_attach(struct dvb_frontend *fe,
-				    struct i2c_adapter *i2c,
-				    const struct isl6423_config *config)
-{
-	struct isl6423_dev *isl6423;
-
-	isl6423 = kzalloc(sizeof(struct isl6423_dev), GFP_KERNEL);
-	if (!isl6423)
-		return NULL;
-
-	isl6423->config	= config;
-	isl6423->i2c	= i2c;
-	fe->sec_priv	= isl6423;
-
-	/* SR3H = 0, SR3M = 1, SR3L = 0 */
-	isl6423->reg_3 = 0x02 << 5;
-	/* SR4H = 0, SR4M = 1, SR4L = 1 */
-	isl6423->reg_4 = 0x03 << 5;
-
-	if (isl6423_set_current(fe))
-		goto exit;
-
-	if (isl6423_set_modulation(fe))
-		goto exit;
-
-	fe->ops.release_sec		= isl6423_release;
-	fe->ops.set_voltage		= isl6423_set_voltage;
-	fe->ops.enable_high_lnb_voltage = isl6423_voltage_boost;
-	isl6423->verbose		= verbose;
-
-	return fe;
-
-exit:
-	kfree(isl6423);
-	fe->sec_priv = NULL;
-	return NULL;
-}
-EXPORT_SYMBOL(isl6423_attach);
-
-MODULE_DESCRIPTION("ISL6423 SEC");
-MODULE_AUTHOR("Manu Abraham");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/isl6423.h b/drivers/media/dvb/frontends/isl6423.h
deleted file mode 100644
index e1a37fb..0000000
--- a/drivers/media/dvb/frontends/isl6423.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
-	Intersil ISL6423 SEC and LNB Power supply controller
-
-	Copyright (C) Manu Abraham <abraham.manu@gmail.com>
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __ISL_6423_H
-#define __ISL_6423_H
-
-#include <linux/dvb/frontend.h>
-
-enum isl6423_current {
-	SEC_CURRENT_275m = 0,
-	SEC_CURRENT_515m,
-	SEC_CURRENT_635m,
-	SEC_CURRENT_800m,
-};
-
-enum isl6423_curlim {
-	SEC_CURRENT_LIM_ON = 1,
-	SEC_CURRENT_LIM_OFF
-};
-
-struct isl6423_config {
-	enum isl6423_current current_max;
-	enum isl6423_curlim curlim;
-	u8 addr;
-	u8 mod_extern;
-};
-
-#if defined(CONFIG_DVB_ISL6423) || (defined(CONFIG_DVB_ISL6423_MODULE) && defined(MODULE))
-
-
-extern struct dvb_frontend *isl6423_attach(struct dvb_frontend *fe,
-					   struct i2c_adapter *i2c,
-					   const struct isl6423_config *config);
-
-#else
-static inline struct dvb_frontend *isl6423_attach(struct dvb_frontend *fe,
-						  struct i2c_adapter *i2c,
-						  const struct isl6423_config *config)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-#endif /* CONFIG_DVB_ISL6423 */
-
-#endif /* __ISL_6423_H */
diff --git a/drivers/media/dvb/frontends/it913x-fe-priv.h b/drivers/media/dvb/frontends/it913x-fe-priv.h
deleted file mode 100644
index eb6fd8a..0000000
--- a/drivers/media/dvb/frontends/it913x-fe-priv.h
+++ /dev/null
@@ -1,1051 +0,0 @@
-
-struct it913xset {	u32 pro;
-			u32 address;
-			u8 reg[15];
-			u8 count;
-};
-
-struct adctable {	u32 adcFrequency;
-			u32 bandwidth;
-			u32 coeff_1_2048;
-			u32 coeff_1_4096;
-			u32 coeff_1_8191;
-			u32 coeff_1_8192;
-			u32 coeff_1_8193;
-			u32 coeff_2_2k;
-			u32 coeff_2_4k;
-			u32 coeff_2_8k;
-			u16 bfsfcw_fftinx_ratio;
-			u16 fftinx_bfsfcw_ratio;
-};
-
-/* clock and coeff tables only table 3 is used with IT9137*/
-/* TODO other tables relate AF9035 may be removed */
-static struct adctable tab1[] = {
-	{	20156250, 6000000,
-		0x02b8ba6e, 0x015c5d37, 0x00ae340d, 0x00ae2e9b, 0x00ae292a,
-		0x015c5d37, 0x00ae2e9b, 0x0057174e, 0x02f1, 0x015c	},
-	{	20156250, 7000000,
-		0x032cd980, 0x01966cc0, 0x00cb3cba, 0x00cb3660, 0x00cb3007,
-		0x01966cc0, 0x00cb3660, 0x00659b30, 0x0285, 0x0196	},
-	{	20156250, 8000000,
-		0x03a0f893, 0x01d07c49, 0x00e84567, 0x00e83e25, 0x00e836e3,
-		0x01d07c49, 0x00e83e25, 0x00741f12, 0x0234, 0x01d0	},
-	{	20156250, 5000000,
-		0x02449b5c, 0x01224dae, 0x00912b60, 0x009126d7, 0x0091224e,
-		0x01224dae, 0x009126d7, 0x0048936b, 0x0387, 0x0122	}
-};
-
-static struct adctable tab2[] = {
-	{	20187500, 6000000,
-		0x02b7a654, 0x015bd32a, 0x00adef04, 0x00ade995, 0x00ade426,
-		0x015bd32a, 0x00ade995, 0x0056f4ca, 0x02f2, 0x015c	},
-	{	20187500, 7000000,
-		0x032b9761, 0x0195cbb1, 0x00caec30, 0x00cae5d8, 0x00cadf81,
-		0x0195cbb1, 0x00cae5d8, 0x006572ec, 0x0286, 0x0196	},
-	{	20187500, 8000000,
-		0x039f886f, 0x01cfc438, 0x00e7e95b, 0x00e7e21c, 0x00e7dadd,
-		0x01cfc438, 0x00e7e21c, 0x0073f10e, 0x0235, 0x01d0	},
-	{	20187500, 5000000,
-		0x0243b546, 0x0121daa3, 0x0090f1d9, 0x0090ed51, 0x0090e8ca,
-		0x0121daa3, 0x0090ed51, 0x004876a9, 0x0388, 0x0122	}
-
-};
-
-static struct adctable tab3[] = {
-	{	20250000, 6000000,
-		0x02b580ad, 0x015ac057, 0x00ad6597, 0x00ad602b, 0x00ad5ac1,
-		0x015ac057, 0x00ad602b, 0x0056b016, 0x02f4, 0x015b	},
-	{	20250000, 7000000,
-		0x03291620, 0x01948b10, 0x00ca4bda, 0x00ca4588, 0x00ca3f36,
-		0x01948b10, 0x00ca4588, 0x006522c4, 0x0288, 0x0195	},
-	{	20250000, 8000000,
-		0x039cab92, 0x01ce55c9, 0x00e7321e, 0x00e72ae4, 0x00e723ab,
-		0x01ce55c9, 0x00e72ae4, 0x00739572, 0x0237, 0x01ce	},
-	{	20250000, 5000000,
-		0x0241eb3b, 0x0120f59e, 0x00907f53, 0x00907acf, 0x0090764b,
-		0x0120f59e, 0x00907acf, 0x00483d67, 0x038b, 0x0121	}
-
-};
-
-static struct adctable tab4[] = {
-	{	20583333, 6000000,
-		0x02aa4598, 0x015522cc, 0x00aa96bb, 0x00aa9166, 0x00aa8c12,
-		0x015522cc, 0x00aa9166, 0x005548b3, 0x0300, 0x0155	},
-	{	20583333, 7000000,
-		0x031bfbdc, 0x018dfdee, 0x00c7052f, 0x00c6fef7, 0x00c6f8bf,
-		0x018dfdee, 0x00c6fef7, 0x00637f7b, 0x0293, 0x018e	},
-	{	20583333, 8000000,
-		0x038db21f, 0x01c6d910, 0x00e373a3, 0x00e36c88, 0x00e3656d,
-		0x01c6d910, 0x00e36c88, 0x0071b644, 0x0240, 0x01c7	},
-	{	20583333, 5000000,
-		0x02388f54, 0x011c47aa, 0x008e2846, 0x008e23d5, 0x008e1f64,
-		0x011c47aa, 0x008e23d5, 0x004711ea, 0x039a, 0x011c	}
-
-};
-
-static struct adctable tab5[] = {
-	{	20416667, 6000000,
-		0x02afd765, 0x0157ebb3, 0x00abfb39, 0x00abf5d9, 0x00abf07a,
-		0x0157ebb3, 0x00abf5d9, 0x0055faed, 0x02fa, 0x0158	},
-	{	20416667, 7000000,
-		0x03227b4b, 0x01913da6, 0x00c8a518, 0x00c89ed3, 0x00c8988e,
-		0x01913da6, 0x00c89ed3, 0x00644f69, 0x028d, 0x0191	},
-	{	20416667, 8000000,
-		0x03951f32, 0x01ca8f99, 0x00e54ef7, 0x00e547cc, 0x00e540a2,
-		0x01ca8f99, 0x00e547cc, 0x0072a3e6, 0x023c, 0x01cb	},
-	{	20416667, 5000000,
-		0x023d337f, 0x011e99c0, 0x008f515a, 0x008f4ce0, 0x008f4865,
-		0x011e99c0, 0x008f4ce0, 0x0047a670, 0x0393, 0x011f	}
-
-};
-
-static struct adctable tab6[] = {
-	{	20480000, 6000000,
-		0x02adb6db, 0x0156db6e, 0x00ab7312, 0x00ab6db7, 0x00ab685c,
-		0x0156db6e, 0x00ab6db7, 0x0055b6db, 0x02fd, 0x0157	},
-	{	20480000, 7000000,
-		0x03200000, 0x01900000, 0x00c80640, 0x00c80000, 0x00c7f9c0,
-		0x01900000, 0x00c80000, 0x00640000, 0x028f, 0x0190	},
-	{	20480000, 8000000,
-		0x03924925, 0x01c92492, 0x00e4996e, 0x00e49249, 0x00e48b25,
-		0x01c92492, 0x00e49249, 0x00724925, 0x023d, 0x01c9	},
-	{	20480000, 5000000,
-		0x023b6db7, 0x011db6db, 0x008edfe5, 0x008edb6e, 0x008ed6f7,
-		0x011db6db, 0x008edb6e, 0x00476db7, 0x0396, 0x011e	}
-};
-
-static struct adctable tab7[] = {
-	{	20500000, 6000000,
-		0x02ad0b99, 0x015685cc, 0x00ab4840, 0x00ab42e6, 0x00ab3d8c,
-		0x015685cc, 0x00ab42e6, 0x0055a173, 0x02fd, 0x0157	},
-	{	20500000, 7000000,
-		0x031f3832, 0x018f9c19, 0x00c7d44b, 0x00c7ce0c, 0x00c7c7ce,
-		0x018f9c19, 0x00c7ce0c, 0x0063e706, 0x0290, 0x0190	},
-	{	20500000, 8000000,
-		0x039164cb, 0x01c8b266, 0x00e46056, 0x00e45933, 0x00e45210,
-		0x01c8b266, 0x00e45933, 0x00722c99, 0x023e, 0x01c9	},
-	{	20500000, 5000000,
-		0x023adeff, 0x011d6f80, 0x008ebc36, 0x008eb7c0, 0x008eb34a,
-		0x011d6f80, 0x008eb7c0, 0x00475be0, 0x0396, 0x011d	}
-
-};
-
-static struct adctable tab8[] = {
-	{	20625000, 6000000,
-		0x02a8e4bd, 0x0154725e, 0x00aa3e81, 0x00aa392f, 0x00aa33de,
-		0x0154725e, 0x00aa392f, 0x00551c98, 0x0302, 0x0154	},
-	{	20625000, 7000000,
-		0x031a6032, 0x018d3019, 0x00c69e41, 0x00c6980c, 0x00c691d8,
-		0x018d3019, 0x00c6980c, 0x00634c06, 0x0294, 0x018d	},
-	{	20625000, 8000000,
-		0x038bdba6, 0x01c5edd3, 0x00e2fe02, 0x00e2f6ea, 0x00e2efd2,
-		0x01c5edd3, 0x00e2f6ea, 0x00717b75, 0x0242, 0x01c6	},
-	{	20625000, 5000000,
-		0x02376948, 0x011bb4a4, 0x008ddec1, 0x008dda52, 0x008dd5e3,
-		0x011bb4a4, 0x008dda52, 0x0046ed29, 0x039c, 0x011c	}
-
-};
-
-struct table {
-		u32 xtal;
-		struct adctable *table;
-};
-
-static struct table fe_clockTable[] = {
-		{12000000, tab3},	/* 12.00MHz */
-		{20480000, tab6},	/* 20.48MHz */
-		{36000000, tab3},	/* 36.00MHz */
-		{30000000, tab1},	/* 30.00MHz */
-		{26000000, tab4},	/* 26.00MHz */
-		{28000000, tab5},	/* 28.00MHz */
-		{32000000, tab7},	/* 32.00MHz */
-		{34000000, tab2},	/* 34.00MHz */
-		{24000000, tab1},	/* 24.00MHz */
-		{22000000, tab8},	/* 22.00MHz */
-};
-
-/* fe get */
-fe_code_rate_t fe_code[] = {
-	FEC_1_2,
-	FEC_2_3,
-	FEC_3_4,
-	FEC_5_6,
-	FEC_7_8,
-	FEC_NONE,
-};
-
-fe_guard_interval_t fe_gi[] = {
-	GUARD_INTERVAL_1_32,
-	GUARD_INTERVAL_1_16,
-	GUARD_INTERVAL_1_8,
-	GUARD_INTERVAL_1_4,
-};
-
-fe_hierarchy_t fe_hi[] = {
-	HIERARCHY_NONE,
-	HIERARCHY_1,
-	HIERARCHY_2,
-	HIERARCHY_4,
-};
-
-fe_transmit_mode_t fe_mode[] = {
-	TRANSMISSION_MODE_2K,
-	TRANSMISSION_MODE_8K,
-	TRANSMISSION_MODE_4K,
-};
-
-fe_modulation_t fe_con[] = {
-	QPSK,
-	QAM_16,
-	QAM_64,
-};
-
-enum {
-	PRIORITY_HIGH = 0,	/* High-priority stream */
-	PRIORITY_LOW,	/* Low-priority stream */
-};
-
-/* Standard demodulator functions */
-static struct it913xset set_solo_fe[] = {
-	{PRO_LINK, GPIOH5_EN, {0x01}, 0x01},
-	{PRO_LINK, GPIOH5_ON, {0x01}, 0x01},
-	{PRO_LINK, GPIOH5_O, {0x00}, 0x01},
-	{PRO_LINK, GPIOH5_O, {0x01}, 0x01},
-	{PRO_LINK, DVBT_INTEN, {0x04}, 0x01},
-	{PRO_LINK, DVBT_ENABLE, {0x05}, 0x01},
-	{PRO_DMOD, MP2IF_MPEG_PAR_MODE, {0x00}, 0x01},
-	{PRO_LINK, HOSTB_MPEG_SER_MODE, {0x00}, 0x01},
-	{PRO_LINK, HOSTB_MPEG_PAR_MODE, {0x00}, 0x01},
-	{PRO_DMOD, DCA_UPPER_CHIP, {0x00}, 0x01},
-	{PRO_LINK, HOSTB_DCA_UPPER, {0x00}, 0x01},
-	{PRO_DMOD, DCA_LOWER_CHIP, {0x00}, 0x01},
-	{PRO_LINK, HOSTB_DCA_LOWER, {0x00}, 0x01},
-	{PRO_DMOD, DCA_PLATCH, {0x00}, 0x01},
-	{PRO_DMOD, DCA_FPGA_LATCH, {0x00}, 0x01},
-	{PRO_DMOD, DCA_STAND_ALONE, {0x01}, 0x01},
-	{PRO_DMOD, DCA_ENABLE, {0x00}, 0x01},
-	{PRO_DMOD, MP2IF_MPEG_PAR_MODE, {0x00}, 0x01},
-	{PRO_DMOD, BFS_FCW, {0x00, 0x00, 0x00}, 0x03},
-	{0xff, 0x0000, {0x00}, 0x00}, /* Terminating Entry */
-};
-
-
-static struct it913xset init_1[] = {
-	{PRO_LINK, LOCK3_OUT, {0x01}, 0x01},
-	{PRO_LINK, PADMISCDRSR, {0x01}, 0x01},
-	{PRO_LINK, PADMISCDR2, {0x00}, 0x01},
-	{PRO_DMOD, 0xec57, {0x00, 0x00}, 0x02},
-	{PRO_LINK, PADMISCDR4, {0x00}, 0x01}, /* Power up */
-	{PRO_LINK, PADMISCDR8, {0x00}, 0x01},
-	{0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */
-};
-
-
-/* Version 1 types */
-static struct it913xset it9135_v1[] = {
-	{PRO_DMOD, 0x0051, {0x01}, 0x01},
-	{PRO_DMOD, 0x0070, {0x0a}, 0x01},
-	{PRO_DMOD, 0x007e, {0x04}, 0x01},
-	{PRO_DMOD, 0x0081, {0x0a}, 0x01},
-	{PRO_DMOD, 0x008a, {0x01}, 0x01},
-	{PRO_DMOD, 0x008e, {0x01}, 0x01},
-	{PRO_DMOD, 0x0092, {0x06}, 0x01},
-	{PRO_DMOD, 0x0099, {0x01}, 0x01},
-	{PRO_DMOD, 0x009f, {0xe1}, 0x01},
-	{PRO_DMOD, 0x00a0, {0xcf}, 0x01},
-	{PRO_DMOD, 0x00a3, {0x01}, 0x01},
-	{PRO_DMOD, 0x00a5, {0x01}, 0x01},
-	{PRO_DMOD, 0x00a6, {0x01}, 0x01},
-	{PRO_DMOD, 0x00a9, {0x00}, 0x01},
-	{PRO_DMOD, 0x00aa, {0x01}, 0x01},
-	{PRO_DMOD, 0x00b0, {0x01}, 0x01},
-	{PRO_DMOD, 0x00c2, {0x05}, 0x01},
-	{PRO_DMOD, 0x00c6, {0x19}, 0x01},
-	{PRO_DMOD, 0xf000, {0x0f}, 0x01},
-	{PRO_DMOD, 0xf016, {0x10}, 0x01},
-	{PRO_DMOD, 0xf017, {0x04}, 0x01},
-	{PRO_DMOD, 0xf018, {0x05}, 0x01},
-	{PRO_DMOD, 0xf019, {0x04}, 0x01},
-	{PRO_DMOD, 0xf01a, {0x05}, 0x01},
-	{PRO_DMOD, 0xf021, {0x03}, 0x01},
-	{PRO_DMOD, 0xf022, {0x0a}, 0x01},
-	{PRO_DMOD, 0xf023, {0x0a}, 0x01},
-	{PRO_DMOD, 0xf02b, {0x00}, 0x01},
-	{PRO_DMOD, 0xf02c, {0x01}, 0x01},
-	{PRO_DMOD, 0xf064, {0x03}, 0x01},
-	{PRO_DMOD, 0xf065, {0xf9}, 0x01},
-	{PRO_DMOD, 0xf066, {0x03}, 0x01},
-	{PRO_DMOD, 0xf067, {0x01}, 0x01},
-	{PRO_DMOD, 0xf06f, {0xe0}, 0x01},
-	{PRO_DMOD, 0xf070, {0x03}, 0x01},
-	{PRO_DMOD, 0xf072, {0x0f}, 0x01},
-	{PRO_DMOD, 0xf073, {0x03}, 0x01},
-	{PRO_DMOD, 0xf078, {0x00}, 0x01},
-	{PRO_DMOD, 0xf087, {0x00}, 0x01},
-	{PRO_DMOD, 0xf09b, {0x3f}, 0x01},
-	{PRO_DMOD, 0xf09c, {0x00}, 0x01},
-	{PRO_DMOD, 0xf09d, {0x20}, 0x01},
-	{PRO_DMOD, 0xf09e, {0x00}, 0x01},
-	{PRO_DMOD, 0xf09f, {0x0c}, 0x01},
-	{PRO_DMOD, 0xf0a0, {0x00}, 0x01},
-	{PRO_DMOD, 0xf130, {0x04}, 0x01},
-	{PRO_DMOD, 0xf132, {0x04}, 0x01},
-	{PRO_DMOD, 0xf144, {0x1a}, 0x01},
-	{PRO_DMOD, 0xf146, {0x00}, 0x01},
-	{PRO_DMOD, 0xf14a, {0x01}, 0x01},
-	{PRO_DMOD, 0xf14c, {0x00}, 0x01},
-	{PRO_DMOD, 0xf14d, {0x00}, 0x01},
-	{PRO_DMOD, 0xf14f, {0x04}, 0x01},
-	{PRO_DMOD, 0xf158, {0x7f}, 0x01},
-	{PRO_DMOD, 0xf15a, {0x00}, 0x01},
-	{PRO_DMOD, 0xf15b, {0x08}, 0x01},
-	{PRO_DMOD, 0xf15d, {0x03}, 0x01},
-	{PRO_DMOD, 0xf15e, {0x05}, 0x01},
-	{PRO_DMOD, 0xf163, {0x05}, 0x01},
-	{PRO_DMOD, 0xf166, {0x01}, 0x01},
-	{PRO_DMOD, 0xf167, {0x40}, 0x01},
-	{PRO_DMOD, 0xf168, {0x0f}, 0x01},
-	{PRO_DMOD, 0xf17a, {0x00}, 0x01},
-	{PRO_DMOD, 0xf17b, {0x00}, 0x01},
-	{PRO_DMOD, 0xf183, {0x01}, 0x01},
-	{PRO_DMOD, 0xf19d, {0x40}, 0x01},
-	{PRO_DMOD, 0xf1bc, {0x36}, 0x01},
-	{PRO_DMOD, 0xf1bd, {0x00}, 0x01},
-	{PRO_DMOD, 0xf1cb, {0xa0}, 0x01},
-	{PRO_DMOD, 0xf1cc, {0x01}, 0x01},
-	{PRO_DMOD, 0xf204, {0x10}, 0x01},
-	{PRO_DMOD, 0xf214, {0x00}, 0x01},
-	{PRO_DMOD, 0xf40e, {0x0a}, 0x01},
-	{PRO_DMOD, 0xf40f, {0x40}, 0x01},
-	{PRO_DMOD, 0xf410, {0x08}, 0x01},
-	{PRO_DMOD, 0xf55f, {0x0a}, 0x01},
-	{PRO_DMOD, 0xf561, {0x15}, 0x01},
-	{PRO_DMOD, 0xf562, {0x20}, 0x01},
-	{PRO_DMOD, 0xf5df, {0xfb}, 0x01},
-	{PRO_DMOD, 0xf5e0, {0x00}, 0x01},
-	{PRO_DMOD, 0xf5e3, {0x09}, 0x01},
-	{PRO_DMOD, 0xf5e4, {0x01}, 0x01},
-	{PRO_DMOD, 0xf5e5, {0x01}, 0x01},
-	{PRO_DMOD, 0xf5f8, {0x01}, 0x01},
-	{PRO_DMOD, 0xf5fd, {0x01}, 0x01},
-	{PRO_DMOD, 0xf600, {0x05}, 0x01},
-	{PRO_DMOD, 0xf601, {0x08}, 0x01},
-	{PRO_DMOD, 0xf602, {0x0b}, 0x01},
-	{PRO_DMOD, 0xf603, {0x0e}, 0x01},
-	{PRO_DMOD, 0xf604, {0x11}, 0x01},
-	{PRO_DMOD, 0xf605, {0x14}, 0x01},
-	{PRO_DMOD, 0xf606, {0x17}, 0x01},
-	{PRO_DMOD, 0xf607, {0x1f}, 0x01},
-	{PRO_DMOD, 0xf60e, {0x00}, 0x01},
-	{PRO_DMOD, 0xf60f, {0x04}, 0x01},
-	{PRO_DMOD, 0xf610, {0x32}, 0x01},
-	{PRO_DMOD, 0xf611, {0x10}, 0x01},
-	{PRO_DMOD, 0xf707, {0xfc}, 0x01},
-	{PRO_DMOD, 0xf708, {0x00}, 0x01},
-	{PRO_DMOD, 0xf709, {0x37}, 0x01},
-	{PRO_DMOD, 0xf70a, {0x00}, 0x01},
-	{PRO_DMOD, 0xf78b, {0x01}, 0x01},
-	{PRO_DMOD, 0xf80f, {0x40}, 0x01},
-	{PRO_DMOD, 0xf810, {0x54}, 0x01},
-	{PRO_DMOD, 0xf811, {0x5a}, 0x01},
-	{PRO_DMOD, 0xf905, {0x01}, 0x01},
-	{PRO_DMOD, 0xfb06, {0x03}, 0x01},
-	{PRO_DMOD, 0xfd8b, {0x00}, 0x01},
-	{0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */
-};
-
-static struct it913xset it9135_38[] = {
-	{PRO_DMOD, 0x0043, {0x00}, 0x01},
-	{PRO_DMOD, 0x0046, {0x38}, 0x01},
-	{PRO_DMOD, 0x0051, {0x01}, 0x01},
-	{PRO_DMOD, 0x005f, {0x00, 0x00}, 0x02},
-	{PRO_DMOD, 0x0068, {0x0a}, 0x01},
-	{PRO_DMOD, 0x0070, {0x0a, 0x05, 0x02}, 0x03},
-	{PRO_DMOD, 0x0075, {0x8c, 0x8c, 0x8c, 0xc8, 0x01}, 0x05},
-	{PRO_DMOD, 0x007e, {0x04, 0x00}, 0x02},
-	{PRO_DMOD, 0x0081, {	0x0a, 0x12, 0x02, 0x0a, 0x03, 0xc8, 0xb8,
-				0xd0, 0xc3, 0x01}, 0x0a},
-	{PRO_DMOD, 0x008e, {0x01}, 0x01},
-	{PRO_DMOD, 0x0092, {0x06, 0x00, 0x00, 0x00, 0x00}, 0x05},
-	{PRO_DMOD, 0x0099, {0x01}, 0x01},
-	{PRO_DMOD, 0x009b, {0x3c, 0x28}, 0x02},
-	{PRO_DMOD, 0x009f, {0xe1, 0xcf}, 0x02},
-	{PRO_DMOD, 0x00a3, {0x01, 0x5a, 0x01, 0x01}, 0x04},
-	{PRO_DMOD, 0x00a9, {0x00, 0x01}, 0x02},
-	{PRO_DMOD, 0x00b0, {0x01}, 0x01},
-	{PRO_DMOD, 0x00b3, {0x02, 0x32}, 0x02},
-	{PRO_DMOD, 0x00b6, {0x14}, 0x01},
-	{PRO_DMOD, 0x00c0, {0x11, 0x00, 0x05}, 0x03},
-	{PRO_DMOD, 0x00c4, {0x00}, 0x01},
-	{PRO_DMOD, 0x00c6, {0x19, 0x00}, 0x02},
-	{PRO_DMOD, 0x00cc, {0x2e, 0x51, 0x33}, 0x03},
-	{PRO_DMOD, 0x00f3, {0x05, 0x8c, 0x8c}, 0x03},
-	{PRO_DMOD, 0x00f8, {0x03, 0x06, 0x06}, 0x03},
-	{PRO_DMOD, 0x00fc, {	0x02, 0x02, 0x02, 0x09, 0x50, 0x7b, 0x77,
-				0x00, 0x02, 0xc8, 0x05, 0x7b}, 0x0c},
-	{PRO_DMOD, 0x0109, {0x02}, 0x01},
-	{PRO_DMOD, 0x0115, {0x0a, 0x03, 0x02, 0x80}, 0x04},
-	{PRO_DMOD, 0x011a, {0xc8, 0x7b, 0x8a, 0xa0}, 0x04},
-	{PRO_DMOD, 0x0122, {0x02, 0x18, 0xc3}, 0x03},
-	{PRO_DMOD, 0x0127, {0x00, 0x07}, 0x02},
-	{PRO_DMOD, 0x012a, {0x53, 0x51, 0x4e, 0x43}, 0x04},
-	{PRO_DMOD, 0x0137, {0x01, 0x00, 0x07, 0x00, 0x06}, 0x05},
-	{PRO_DMOD, 0x013d, {0x00, 0x01, 0x5b, 0xc8, 0x59}, 0x05},
-	{PRO_DMOD, 0xf000, {0x0f}, 0x01},
-	{PRO_DMOD, 0xf016, {0x10, 0x04, 0x05, 0x04, 0x05}, 0x05},
-	{PRO_DMOD, 0xf01f, {0x8c, 0x00, 0x03, 0x0a, 0x0a}, 0x05},
-	{PRO_DMOD, 0xf029, {0x8c, 0x00, 0x00, 0x01}, 0x04},
-	{PRO_DMOD, 0xf064, {0x03, 0xf9, 0x03, 0x01}, 0x04},
-	{PRO_DMOD, 0xf06f, {0xe0, 0x03}, 0x02},
-	{PRO_DMOD, 0xf072, {0x0f, 0x03}, 0x02},
-	{PRO_DMOD, 0xf077, {0x01, 0x00}, 0x02},
-	{PRO_DMOD, 0xf085, {0x00, 0x02, 0x00}, 0x03},
-	{PRO_DMOD, 0xf09b, {0x3f, 0x00, 0x20, 0x00, 0x0c, 0x00}, 0x06},
-	{PRO_DMOD, 0xf130, {0x04}, 0x01},
-	{PRO_DMOD, 0xf132, {0x04}, 0x01},
-	{PRO_DMOD, 0xf144, {0x1a}, 0x01},
-	{PRO_DMOD, 0xf146, {0x00}, 0x01},
-	{PRO_DMOD, 0xf14a, {0x01}, 0x01},
-	{PRO_DMOD, 0xf14c, {0x00, 0x00}, 0x02},
-	{PRO_DMOD, 0xf14f, {0x04}, 0x01},
-	{PRO_DMOD, 0xf158, {0x7f}, 0x01},
-	{PRO_DMOD, 0xf15a, {0x00, 0x08}, 0x02},
-	{PRO_DMOD, 0xf15d, {0x03, 0x05}, 0x02},
-	{PRO_DMOD, 0xf163, {0x05}, 0x01},
-	{PRO_DMOD, 0xf166, {0x01, 0x40, 0x0f}, 0x03},
-	{PRO_DMOD, 0xf17a, {0x00, 0x00}, 0x02},
-	{PRO_DMOD, 0xf183, {0x01}, 0x01},
-	{PRO_DMOD, 0xf19d, {0x40}, 0x01},
-	{PRO_DMOD, 0xf1bc, {0x36, 0x00}, 0x02},
-	{PRO_DMOD, 0xf1cb, {0xa0, 0x01}, 0x02},
-	{PRO_DMOD, 0xf204, {0x10}, 0x01},
-	{PRO_DMOD, 0xf214, {0x00}, 0x01},
-	{PRO_DMOD, 0xf24c, {0x88, 0x95, 0x9a, 0x90}, 0x04},
-	{PRO_DMOD, 0xf25a, {0x07, 0xe8, 0x03, 0xb0, 0x04}, 0x05},
-	{PRO_DMOD, 0xf270, {0x01, 0x02, 0x01, 0x02}, 0x04},
-	{PRO_DMOD, 0xf40e, {0x0a, 0x40, 0x08}, 0x03},
-	{PRO_DMOD, 0xf55f, {0x0a}, 0x01},
-	{PRO_DMOD, 0xf561, {0x15, 0x20}, 0x02},
-	{PRO_DMOD, 0xf5df, {0xfb, 0x00}, 0x02},
-	{PRO_DMOD, 0xf5e3, {0x09, 0x01, 0x01}, 0x03},
-	{PRO_DMOD, 0xf5f8, {0x01}, 0x01},
-	{PRO_DMOD, 0xf5fd, {0x01}, 0x01},
-	{PRO_DMOD, 0xf600, {	0x05, 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17,
-				0x1f}, 0x08},
-	{PRO_DMOD, 0xf60e, {0x00, 0x04, 0x32, 0x10}, 0x04},
-	{PRO_DMOD, 0xf707, {0xfc, 0x00, 0x37, 0x00}, 0x04},
-	{PRO_DMOD, 0xf78b, {0x01}, 0x01},
-	{PRO_DMOD, 0xf80f, {0x40, 0x54, 0x5a}, 0x03},
-	{PRO_DMOD, 0xf905, {0x01}, 0x01},
-	{PRO_DMOD, 0xfb06, {0x03}, 0x01},
-	{PRO_DMOD, 0xfd8b, {0x00}, 0x01},
-	{0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */
-};
-
-static struct it913xset it9135_51[] = {
-	{PRO_DMOD, 0x0043, {0x00}, 0x01},
-	{PRO_DMOD, 0x0046, {0x51}, 0x01},
-	{PRO_DMOD, 0x0051, {0x01}, 0x01},
-	{PRO_DMOD, 0x005f, {0x00, 0x00}, 0x02},
-	{PRO_DMOD, 0x0068, {0x0a}, 0x01},
-	{PRO_DMOD, 0x0070, {0x0a, 0x06, 0x02}, 0x03},
-	{PRO_DMOD, 0x0075, {0x8c, 0x8c, 0x8c, 0xc8, 0x01}, 0x05},
-	{PRO_DMOD, 0x007e, {0x04, 0x00}, 0x02},
-	{PRO_DMOD, 0x0081, {	0x0a, 0x12, 0x02, 0x0a, 0x03, 0xc0, 0x96,
-				0xcf, 0xc3, 0x01}, 0x0a},
-	{PRO_DMOD, 0x008e, {0x01}, 0x01},
-	{PRO_DMOD, 0x0092, {0x06, 0x00, 0x00, 0x00, 0x00}, 0x05},
-	{PRO_DMOD, 0x0099, {0x01}, 0x01},
-	{PRO_DMOD, 0x009b, {0x3c, 0x28}, 0x02},
-	{PRO_DMOD, 0x009f, {0xe1, 0xcf}, 0x02},
-	{PRO_DMOD, 0x00a3, {0x01, 0x5a, 0x01, 0x01}, 0x04},
-	{PRO_DMOD, 0x00a9, {0x00, 0x01}, 0x02},
-	{PRO_DMOD, 0x00b0, {0x01}, 0x01},
-	{PRO_DMOD, 0x00b3, {0x02, 0x3c}, 0x02},
-	{PRO_DMOD, 0x00b6, {0x14}, 0x01},
-	{PRO_DMOD, 0x00c0, {0x11, 0x00, 0x05}, 0x03},
-	{PRO_DMOD, 0x00c4, {0x00}, 0x01},
-	{PRO_DMOD, 0x00c6, {0x19, 0x00}, 0x02},
-	{PRO_DMOD, 0x00cc, {0x2e, 0x51, 0x33}, 0x03},
-	{PRO_DMOD, 0x00f3, {0x05, 0x8c, 0x8c}, 0x03},
-	{PRO_DMOD, 0x00f8, {0x03, 0x06, 0x06}, 0x03},
-	{PRO_DMOD, 0x00fc, {	0x03, 0x02, 0x02, 0x09, 0x50, 0x7a, 0x77,
-				0x01, 0x02, 0xb0, 0x02, 0x7a}, 0x0c},
-	{PRO_DMOD, 0x0109, {0x02}, 0x01},
-	{PRO_DMOD, 0x0115, {0x0a, 0x03, 0x02, 0x80}, 0x04},
-	{PRO_DMOD, 0x011a, {0xc0, 0x7a, 0xac, 0x8c}, 0x04},
-	{PRO_DMOD, 0x0122, {0x02, 0x70, 0xa4}, 0x03},
-	{PRO_DMOD, 0x0127, {0x00, 0x07}, 0x02},
-	{PRO_DMOD, 0x012a, {0x53, 0x51, 0x4e, 0x43}, 0x04},
-	{PRO_DMOD, 0x0137, {0x01, 0x00, 0x07, 0x00, 0x06}, 0x05},
-	{PRO_DMOD, 0x013d, {0x00, 0x01, 0x5b, 0xc0, 0x59}, 0x05},
-	{PRO_DMOD, 0xf000, {0x0f}, 0x01},
-	{PRO_DMOD, 0xf016, {0x10, 0x04, 0x05, 0x04, 0x05}, 0x05},
-	{PRO_DMOD, 0xf01f, {0x8c, 0x00, 0x03, 0x0a, 0x0a}, 0x05},
-	{PRO_DMOD, 0xf029, {0x8c, 0x00, 0x00, 0x01}, 0x04},
-	{PRO_DMOD, 0xf064, {0x03, 0xf9, 0x03, 0x01}, 0x04},
-	{PRO_DMOD, 0xf06f, {0xe0, 0x03}, 0x02},
-	{PRO_DMOD, 0xf072, {0x0f, 0x03}, 0x02},
-	{PRO_DMOD, 0xf077, {0x01, 0x00}, 0x02},
-	{PRO_DMOD, 0xf085, {0xc0, 0x01, 0x00}, 0x03},
-	{PRO_DMOD, 0xf09b, {0x3f, 0x00, 0x20, 0x00, 0x0c, 0x00}, 0x06},
-	{PRO_DMOD, 0xf130, {0x04}, 0x01},
-	{PRO_DMOD, 0xf132, {0x04}, 0x01},
-	{PRO_DMOD, 0xf144, {0x1a}, 0x01},
-	{PRO_DMOD, 0xf146, {0x00}, 0x01},
-	{PRO_DMOD, 0xf14a, {0x01}, 0x01},
-	{PRO_DMOD, 0xf14c, {0x00, 0x00}, 0x02},
-	{PRO_DMOD, 0xf14f, {0x04}, 0x01},
-	{PRO_DMOD, 0xf158, {0x7f}, 0x01},
-	{PRO_DMOD, 0xf15a, {0x00, 0x08}, 0x02},
-	{PRO_DMOD, 0xf15d, {0x03, 0x05}, 0x02},
-	{PRO_DMOD, 0xf163, {0x05}, 0x01},
-	{PRO_DMOD, 0xf166, {0x01, 0x40, 0x0f}, 0x03},
-	{PRO_DMOD, 0xf17a, {0x00, 0x00}, 0x02},
-	{PRO_DMOD, 0xf183, {0x01}, 0x01},
-	{PRO_DMOD, 0xf19d, {0x40}, 0x01},
-	{PRO_DMOD, 0xf1bc, {0x36, 0x00}, 0x02},
-	{PRO_DMOD, 0xf1cb, {0xa0, 0x01}, 0x02},
-	{PRO_DMOD, 0xf204, {0x10}, 0x01},
-	{PRO_DMOD, 0xf214, {0x00}, 0x01},
-	{PRO_DMOD, 0xf24c, {0x88, 0x95, 0x9a, 0x90}, 0x04},
-	{PRO_DMOD, 0xf25a, {0x07, 0xe8, 0x03, 0xb0, 0x04}, 0x05},
-	{PRO_DMOD, 0xf270, {0x01, 0x02, 0x01, 0x02}, 0x04},
-	{PRO_DMOD, 0xf40e, {0x0a, 0x40, 0x08}, 0x03},
-	{PRO_DMOD, 0xf55f, {0x0a}, 0x01},
-	{PRO_DMOD, 0xf561, {0x15, 0x20}, 0x02},
-	{PRO_DMOD, 0xf5df, {0xfb, 0x00}, 0x02},
-	{PRO_DMOD, 0xf5e3, {0x09, 0x01, 0x01}, 0x03},
-	{PRO_DMOD, 0xf5f8, {0x01}, 0x01},
-	{PRO_DMOD, 0xf5fd, {0x01}, 0x01},
-	{PRO_DMOD, 0xf600, {	0x05, 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17,
-				0x1f}, 0x08},
-	{PRO_DMOD, 0xf60e, {0x00, 0x04, 0x32, 0x10}, 0x04},
-	{PRO_DMOD, 0xf707, {0xfc, 0x00, 0x37, 0x00}, 0x04},
-	{PRO_DMOD, 0xf78b, {0x01}, 0x01},
-	{PRO_DMOD, 0xf80f, {0x40, 0x54, 0x5a}, 0x03},
-	{PRO_DMOD, 0xf905, {0x01}, 0x01},
-	{PRO_DMOD, 0xfb06, {0x03}, 0x01},
-	{PRO_DMOD, 0xfd8b, {0x00}, 0x01},
-	{0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */
-};
-
-static struct it913xset it9135_52[] = {
-	{PRO_DMOD, 0x0043, {0x00}, 0x01},
-	{PRO_DMOD, 0x0046, {0x52}, 0x01},
-	{PRO_DMOD, 0x0051, {0x01}, 0x01},
-	{PRO_DMOD, 0x005f, {0x00, 0x00}, 0x02},
-	{PRO_DMOD, 0x0068, {0x10}, 0x01},
-	{PRO_DMOD, 0x0070, {0x0a, 0x05, 0x02}, 0x03},
-	{PRO_DMOD, 0x0075, {0x8c, 0x8c, 0x8c, 0xa0, 0x01}, 0x05},
-	{PRO_DMOD, 0x007e, {0x04, 0x00}, 0x02},
-	{PRO_DMOD, 0x0081, {	0x0a, 0x12, 0x03, 0x0a, 0x03, 0xb3, 0x97,
-				0xc0, 0x9e, 0x01}, 0x0a},
-	{PRO_DMOD, 0x008e, {0x01}, 0x01},
-	{PRO_DMOD, 0x0092, {0x06, 0x00, 0x00, 0x00, 0x00}, 0x05},
-	{PRO_DMOD, 0x0099, {0x01}, 0x01},
-	{PRO_DMOD, 0x009b, {0x3c, 0x28}, 0x02},
-	{PRO_DMOD, 0x009f, {0xe1, 0xcf}, 0x02},
-	{PRO_DMOD, 0x00a3, {0x01, 0x5c, 0x01, 0x01}, 0x04},
-	{PRO_DMOD, 0x00a9, {0x00, 0x01}, 0x02},
-	{PRO_DMOD, 0x00b0, {0x01}, 0x01},
-	{PRO_DMOD, 0x00b3, {0x02, 0x3c}, 0x02},
-	{PRO_DMOD, 0x00b6, {0x14}, 0x01},
-	{PRO_DMOD, 0x00c0, {0x11, 0x00, 0x05}, 0x03},
-	{PRO_DMOD, 0x00c4, {0x00}, 0x01},
-	{PRO_DMOD, 0x00c6, {0x19, 0x00}, 0x02},
-	{PRO_DMOD, 0x00cc, {0x2e, 0x51, 0x33}, 0x03},
-	{PRO_DMOD, 0x00f3, {0x05, 0x91, 0x8c}, 0x03},
-	{PRO_DMOD, 0x00f8, {0x03, 0x06, 0x06}, 0x03},
-	{PRO_DMOD, 0x00fc, {	0x03, 0x02, 0x02, 0x09, 0x50, 0x74, 0x77,
-				0x02, 0x02, 0xae, 0x02, 0x6e}, 0x0c},
-	{PRO_DMOD, 0x0109, {0x02}, 0x01},
-	{PRO_DMOD, 0x0115, {0x0a, 0x03, 0x02, 0x80}, 0x04},
-	{PRO_DMOD, 0x011a, {0xcd, 0x62, 0xa4, 0x8c}, 0x04},
-	{PRO_DMOD, 0x0122, {0x03, 0x18, 0x9e}, 0x03},
-	{PRO_DMOD, 0x0127, {0x00, 0x07}, 0x02},
-	{PRO_DMOD, 0x012a, {0x53, 0x51, 0x4e, 0x43}, 0x04},
-	{PRO_DMOD, 0x0137, {0x00, 0x00, 0x07, 0x00, 0x06}, 0x05},
-	{PRO_DMOD, 0x013d, {0x00, 0x01, 0x5b, 0xb6, 0x59}, 0x05},
-	{PRO_DMOD, 0xf000, {0x0f}, 0x01},
-	{PRO_DMOD, 0xf016, {0x10, 0x04, 0x05, 0x04, 0x05}, 0x05},
-	{PRO_DMOD, 0xf01f, {0x8c, 0x00, 0x03, 0x0a, 0x0a}, 0x05},
-	{PRO_DMOD, 0xf029, {0x8c, 0x00, 0x00, 0x01}, 0x04},
-	{PRO_DMOD, 0xf064, {0x03, 0xf9, 0x03, 0x01}, 0x04},
-	{PRO_DMOD, 0xf06f, {0xe0, 0x03}, 0x02},
-	{PRO_DMOD, 0xf072, {0x0f, 0x03}, 0x02},
-	{PRO_DMOD, 0xf077, {0x01, 0x00}, 0x02},
-	{PRO_DMOD, 0xf085, {0xc0, 0x01, 0x00}, 0x03},
-	{PRO_DMOD, 0xf09b, {0x3f, 0x00, 0x20, 0x00, 0x0c, 0x00}, 0x06},
-	{PRO_DMOD, 0xf130, {0x04}, 0x01},
-	{PRO_DMOD, 0xf132, {0x04}, 0x01},
-	{PRO_DMOD, 0xf144, {0x1a}, 0x01},
-	{PRO_DMOD, 0xf146, {0x00}, 0x01},
-	{PRO_DMOD, 0xf14a, {0x01}, 0x01},
-	{PRO_DMOD, 0xf14c, {0x00, 0x00}, 0x02},
-	{PRO_DMOD, 0xf14f, {0x04}, 0x01},
-	{PRO_DMOD, 0xf158, {0x7f}, 0x01},
-	{PRO_DMOD, 0xf15a, {0x00, 0x08}, 0x02},
-	{PRO_DMOD, 0xf15d, {0x03, 0x05}, 0x02},
-	{PRO_DMOD, 0xf163, {0x05}, 0x01},
-	{PRO_DMOD, 0xf166, {0x01, 0x40, 0x0f}, 0x03},
-	{PRO_DMOD, 0xf17a, {0x00, 0x00}, 0x02},
-	{PRO_DMOD, 0xf183, {0x01}, 0x01},
-	{PRO_DMOD, 0xf19d, {0x40}, 0x01},
-	{PRO_DMOD, 0xf1bc, {0x36, 0x00}, 0x02},
-	{PRO_DMOD, 0xf1cb, {0xa0, 0x01}, 0x02},
-	{PRO_DMOD, 0xf204, {0x10}, 0x01},
-	{PRO_DMOD, 0xf214, {0x00}, 0x01},
-	{PRO_DMOD, 0xf24c, {0x88, 0x95, 0x9a, 0x90}, 0x04},
-	{PRO_DMOD, 0xf25a, {0x07, 0xe8, 0x03, 0xb0, 0x04}, 0x05},
-	{PRO_DMOD, 0xf270, {0x01, 0x02, 0x01, 0x02}, 0x04},
-	{PRO_DMOD, 0xf40e, {0x0a, 0x40, 0x08}, 0x03},
-	{PRO_DMOD, 0xf55f, {0x0a}, 0x01},
-	{PRO_DMOD, 0xf561, {0x15, 0x20}, 0x02},
-	{PRO_DMOD, 0xf5df, {0xfb, 0x00}, 0x02},
-	{PRO_DMOD, 0xf5e3, {0x09, 0x01, 0x01}, 0x03},
-	{PRO_DMOD, 0xf5f8, {0x01}, 0x01},
-	{PRO_DMOD, 0xf5fd, {0x01}, 0x01},
-	{PRO_DMOD, 0xf600, {0x05, 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17,
-				0x1f}, 0x08},
-	{PRO_DMOD, 0xf60e, {0x00, 0x04, 0x32, 0x10}, 0x04},
-	{PRO_DMOD, 0xf707, {0xfc, 0x00, 0x37, 0x00}, 0x04},
-	{PRO_DMOD, 0xf78b, {0x01}, 0x01},
-	{PRO_DMOD, 0xf80f, {0x40, 0x54, 0x5a}, 0x03},
-	{PRO_DMOD, 0xf905, {0x01}, 0x01},
-	{PRO_DMOD, 0xfb06, {0x03}, 0x01},
-	{PRO_DMOD, 0xfd8b, {0x00}, 0x01},
-	{0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */
-};
-
-/* Version 2 types */
-static struct it913xset it9135_v2[] = {
-	{PRO_DMOD, 0x0051, {0x01}, 0x01},
-	{PRO_DMOD, 0x0070, {0x0a}, 0x01},
-	{PRO_DMOD, 0x007e, {0x04}, 0x01},
-	{PRO_DMOD, 0x0081, {0x0a}, 0x01},
-	{PRO_DMOD, 0x008a, {0x01}, 0x01},
-	{PRO_DMOD, 0x008e, {0x01}, 0x01},
-	{PRO_DMOD, 0x0092, {0x06}, 0x01},
-	{PRO_DMOD, 0x0099, {0x01}, 0x01},
-	{PRO_DMOD, 0x009f, {0xe1}, 0x01},
-	{PRO_DMOD, 0x00a0, {0xcf}, 0x01},
-	{PRO_DMOD, 0x00a3, {0x01}, 0x01},
-	{PRO_DMOD, 0x00a5, {0x01}, 0x01},
-	{PRO_DMOD, 0x00a6, {0x01}, 0x01},
-	{PRO_DMOD, 0x00a9, {0x00}, 0x01},
-	{PRO_DMOD, 0x00aa, {0x01}, 0x01},
-	{PRO_DMOD, 0x00b0, {0x01}, 0x01},
-	{PRO_DMOD, 0x00c2, {0x05}, 0x01},
-	{PRO_DMOD, 0x00c6, {0x19}, 0x01},
-	{PRO_DMOD, 0xf000, {0x0f}, 0x01},
-	{PRO_DMOD, 0xf02b, {0x00}, 0x01},
-	{PRO_DMOD, 0xf064, {0x03}, 0x01},
-	{PRO_DMOD, 0xf065, {0xf9}, 0x01},
-	{PRO_DMOD, 0xf066, {0x03}, 0x01},
-	{PRO_DMOD, 0xf067, {0x01}, 0x01},
-	{PRO_DMOD, 0xf06f, {0xe0}, 0x01},
-	{PRO_DMOD, 0xf070, {0x03}, 0x01},
-	{PRO_DMOD, 0xf072, {0x0f}, 0x01},
-	{PRO_DMOD, 0xf073, {0x03}, 0x01},
-	{PRO_DMOD, 0xf078, {0x00}, 0x01},
-	{PRO_DMOD, 0xf087, {0x00}, 0x01},
-	{PRO_DMOD, 0xf09b, {0x3f}, 0x01},
-	{PRO_DMOD, 0xf09c, {0x00}, 0x01},
-	{PRO_DMOD, 0xf09d, {0x20}, 0x01},
-	{PRO_DMOD, 0xf09e, {0x00}, 0x01},
-	{PRO_DMOD, 0xf09f, {0x0c}, 0x01},
-	{PRO_DMOD, 0xf0a0, {0x00}, 0x01},
-	{PRO_DMOD, 0xf130, {0x04}, 0x01},
-	{PRO_DMOD, 0xf132, {0x04}, 0x01},
-	{PRO_DMOD, 0xf144, {0x1a}, 0x01},
-	{PRO_DMOD, 0xf146, {0x00}, 0x01},
-	{PRO_DMOD, 0xf14a, {0x01}, 0x01},
-	{PRO_DMOD, 0xf14c, {0x00}, 0x01},
-	{PRO_DMOD, 0xf14d, {0x00}, 0x01},
-	{PRO_DMOD, 0xf14f, {0x04}, 0x01},
-	{PRO_DMOD, 0xf158, {0x7f}, 0x01},
-	{PRO_DMOD, 0xf15a, {0x00}, 0x01},
-	{PRO_DMOD, 0xf15b, {0x08}, 0x01},
-	{PRO_DMOD, 0xf15d, {0x03}, 0x01},
-	{PRO_DMOD, 0xf15e, {0x05}, 0x01},
-	{PRO_DMOD, 0xf163, {0x05}, 0x01},
-	{PRO_DMOD, 0xf166, {0x01}, 0x01},
-	{PRO_DMOD, 0xf167, {0x40}, 0x01},
-	{PRO_DMOD, 0xf168, {0x0f}, 0x01},
-	{PRO_DMOD, 0xf17a, {0x00}, 0x01},
-	{PRO_DMOD, 0xf17b, {0x00}, 0x01},
-	{PRO_DMOD, 0xf183, {0x01}, 0x01},
-	{PRO_DMOD, 0xf19d, {0x40}, 0x01},
-	{PRO_DMOD, 0xf1bc, {0x36}, 0x01},
-	{PRO_DMOD, 0xf1bd, {0x00}, 0x01},
-	{PRO_DMOD, 0xf1cb, {0xa0}, 0x01},
-	{PRO_DMOD, 0xf1cc, {0x01}, 0x01},
-	{PRO_DMOD, 0xf204, {0x10}, 0x01},
-	{PRO_DMOD, 0xf214, {0x00}, 0x01},
-	{PRO_DMOD, 0xf40e, {0x0a}, 0x01},
-	{PRO_DMOD, 0xf40f, {0x40}, 0x01},
-	{PRO_DMOD, 0xf410, {0x08}, 0x01},
-	{PRO_DMOD, 0xf55f, {0x0a}, 0x01},
-	{PRO_DMOD, 0xf561, {0x15}, 0x01},
-	{PRO_DMOD, 0xf562, {0x20}, 0x01},
-	{PRO_DMOD, 0xf5e3, {0x09}, 0x01},
-	{PRO_DMOD, 0xf5e4, {0x01}, 0x01},
-	{PRO_DMOD, 0xf5e5, {0x01}, 0x01},
-	{PRO_DMOD, 0xf600, {0x05}, 0x01},
-	{PRO_DMOD, 0xf601, {0x08}, 0x01},
-	{PRO_DMOD, 0xf602, {0x0b}, 0x01},
-	{PRO_DMOD, 0xf603, {0x0e}, 0x01},
-	{PRO_DMOD, 0xf604, {0x11}, 0x01},
-	{PRO_DMOD, 0xf605, {0x14}, 0x01},
-	{PRO_DMOD, 0xf606, {0x17}, 0x01},
-	{PRO_DMOD, 0xf607, {0x1f}, 0x01},
-	{PRO_DMOD, 0xf60e, {0x00}, 0x01},
-	{PRO_DMOD, 0xf60f, {0x04}, 0x01},
-	{PRO_DMOD, 0xf610, {0x32}, 0x01},
-	{PRO_DMOD, 0xf611, {0x10}, 0x01},
-	{PRO_DMOD, 0xf707, {0xfc}, 0x01},
-	{PRO_DMOD, 0xf708, {0x00}, 0x01},
-	{PRO_DMOD, 0xf709, {0x37}, 0x01},
-	{PRO_DMOD, 0xf70a, {0x00}, 0x01},
-	{PRO_DMOD, 0xf78b, {0x01}, 0x01},
-	{PRO_DMOD, 0xf80f, {0x40}, 0x01},
-	{PRO_DMOD, 0xf810, {0x54}, 0x01},
-	{PRO_DMOD, 0xf811, {0x5a}, 0x01},
-	{PRO_DMOD, 0xf905, {0x01}, 0x01},
-	{PRO_DMOD, 0xfb06, {0x03}, 0x01},
-	{PRO_DMOD, 0xfd8b, {0x00}, 0x01},
-	{0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */
-};
-
-static struct it913xset it9135_60[] = {
-	{PRO_DMOD, 0x0043, {0x00}, 0x01},
-	{PRO_DMOD, 0x0046, {0x60}, 0x01},
-	{PRO_DMOD, 0x0051, {0x01}, 0x01},
-	{PRO_DMOD, 0x005f, {0x00, 0x00}, 0x02},
-	{PRO_DMOD, 0x0068, {0x0a}, 0x01},
-	{PRO_DMOD, 0x006a, {0x03}, 0x01},
-	{PRO_DMOD, 0x0070, {0x0a, 0x05, 0x02}, 0x03},
-	{PRO_DMOD, 0x0075, {0x8c, 0x8c, 0x8c, 0x8c, 0x01}, 0x05},
-	{PRO_DMOD, 0x007e, {0x04}, 0x01},
-	{PRO_DMOD, 0x0081, {0x0a, 0x12}, 0x02},
-	{PRO_DMOD, 0x0084, {0x0a, 0x33, 0xbe, 0xa0, 0xc6, 0xb6, 0x01}, 0x07},
-	{PRO_DMOD, 0x008e, {0x01}, 0x01},
-	{PRO_DMOD, 0x0092, {0x06, 0x00, 0x00, 0x00, 0x00}, 0x05},
-	{PRO_DMOD, 0x0099, {0x01}, 0x01},
-	{PRO_DMOD, 0x009b, {0x3c, 0x28}, 0x02},
-	{PRO_DMOD, 0x009f, {0xe1, 0xcf}, 0x02},
-	{PRO_DMOD, 0x00a3, {0x01, 0x5a, 0x01, 0x01}, 0x04},
-	{PRO_DMOD, 0x00a9, {0x00, 0x01}, 0x02},
-	{PRO_DMOD, 0x00b0, {0x01}, 0x01},
-	{PRO_DMOD, 0x00b3, {0x02, 0x3a}, 0x02},
-	{PRO_DMOD, 0x00b6, {0x14}, 0x01},
-	{PRO_DMOD, 0x00c0, {0x11, 0x00, 0x05, 0x01, 0x00}, 0x05},
-	{PRO_DMOD, 0x00c6, {0x19, 0x00}, 0x02},
-	{PRO_DMOD, 0x00cb, {0x32, 0x2c, 0x4f, 0x30}, 0x04},
-	{PRO_DMOD, 0x00f3, {0x05, 0xa0, 0x8c}, 0x03},
-	{PRO_DMOD, 0x00f8, {0x03, 0x06, 0x06}, 0x03},
-	{PRO_DMOD, 0x00fc, {	0x03, 0x03, 0x02, 0x0a, 0x50, 0x7b, 0x8c,
-				0x00, 0x02, 0xbe, 0x00}, 0x0b},
-	{PRO_DMOD, 0x0109, {0x02}, 0x01},
-	{PRO_DMOD, 0x0115, {0x0a, 0x03}, 0x02},
-	{PRO_DMOD, 0x011a, {0xbe}, 0x01},
-	{PRO_DMOD, 0x0124, {0xae}, 0x01},
-	{PRO_DMOD, 0x0127, {0x00}, 0x01},
-	{PRO_DMOD, 0x012a, {0x56, 0x50, 0x47, 0x42}, 0x04},
-	{PRO_DMOD, 0x0137, {0x00}, 0x01},
-	{PRO_DMOD, 0x013b, {0x08}, 0x01},
-	{PRO_DMOD, 0x013f, {0x5b}, 0x01},
-	{PRO_DMOD, 0x0141, {	0x59, 0xf9, 0x19, 0x19, 0x8c, 0x8c, 0x8c,
-				0x6e, 0x8c, 0x50, 0x8c, 0x8c, 0xac, 0xc6,
-				0x33}, 0x0f},
-	{PRO_DMOD, 0x0151, {0x28}, 0x01},
-	{PRO_DMOD, 0x0153, {0xbc}, 0x01},
-	{PRO_DMOD, 0x0178, {0x09}, 0x01},
-	{PRO_DMOD, 0x0181, {0x94, 0x6e}, 0x02},
-	{PRO_DMOD, 0x0185, {0x24}, 0x01},
-	{PRO_DMOD, 0x0187, {0x00, 0x00, 0xbe, 0x02, 0x80}, 0x05},
-	{PRO_DMOD, 0xed02, {0xff}, 0x01},
-	{PRO_DMOD, 0xee42, {0xff}, 0x01},
-	{PRO_DMOD, 0xee82, {0xff}, 0x01},
-	{PRO_DMOD, 0xf000, {0x0f}, 0x01},
-	{PRO_DMOD, 0xf01f, {0x8c, 0x00}, 0x02},
-	{PRO_DMOD, 0xf029, {0x8c, 0x00, 0x00}, 0x03},
-	{PRO_DMOD, 0xf064, {0x03, 0xf9, 0x03, 0x01}, 0x04},
-	{PRO_DMOD, 0xf06f, {0xe0, 0x03}, 0x02},
-	{PRO_DMOD, 0xf072, {0x0f, 0x03}, 0x02},
-	{PRO_DMOD, 0xf077, {0x01, 0x00}, 0x02},
-	{PRO_DMOD, 0xf087, {0x00}, 0x01},
-	{PRO_DMOD, 0xf09b, {0x3f, 0x00, 0x20, 0x00, 0x0c, 0x00}, 0x06},
-	{PRO_DMOD, 0xf130, {0x04}, 0x01},
-	{PRO_DMOD, 0xf132, {0x04}, 0x01},
-	{PRO_DMOD, 0xf144, {0x1a}, 0x01},
-	{PRO_DMOD, 0xf146, {0x00}, 0x01},
-	{PRO_DMOD, 0xf14a, {0x01}, 0x01},
-	{PRO_DMOD, 0xf14c, {0x00, 0x00}, 0x02},
-	{PRO_DMOD, 0xf14f, {0x04}, 0x01},
-	{PRO_DMOD, 0xf158, {0x7f}, 0x01},
-	{PRO_DMOD, 0xf15a, {0x00, 0x08}, 0x02},
-	{PRO_DMOD, 0xf15d, {0x03, 0x05}, 0x02},
-	{PRO_DMOD, 0xf163, {0x05}, 0x01},
-	{PRO_DMOD, 0xf166, {0x01, 0x40, 0x0f}, 0x03},
-	{PRO_DMOD, 0xf17a, {0x00, 0x00}, 0x02},
-	{PRO_DMOD, 0xf183, {0x01}, 0x01},
-	{PRO_DMOD, 0xf19d, {0x40}, 0x01},
-	{PRO_DMOD, 0xf1bc, {0x36, 0x00}, 0x02},
-	{PRO_DMOD, 0xf1cb, {0xa0, 0x01}, 0x02},
-	{PRO_DMOD, 0xf204, {0x10}, 0x01},
-	{PRO_DMOD, 0xf214, {0x00}, 0x01},
-	{PRO_DMOD, 0xf24c, {0x88, 0x95, 0x9a, 0x90}, 0x04},
-	{PRO_DMOD, 0xf25a, {0x07, 0xe8, 0x03, 0xb0, 0x04}, 0x05},
-	{PRO_DMOD, 0xf270, {0x01, 0x02, 0x01, 0x02}, 0x04},
-	{PRO_DMOD, 0xf40e, {0x0a, 0x40, 0x08}, 0x03},
-	{PRO_DMOD, 0xf55f, {0x0a}, 0x01},
-	{PRO_DMOD, 0xf561, {0x15, 0x20}, 0x02},
-	{PRO_DMOD, 0xf5e3, {0x09, 0x01, 0x01}, 0x03},
-	{PRO_DMOD, 0xf600, {0x05, 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17
-		, 0x1f}, 0x08},
-	{PRO_DMOD, 0xf60e, {0x00, 0x04, 0x32, 0x10}, 0x04},
-	{PRO_DMOD, 0xf707, {0xfc, 0x00, 0x37, 0x00}, 0x04},
-	{PRO_DMOD, 0xf78b, {0x01}, 0x01},
-	{PRO_DMOD, 0xf80f, {0x40, 0x54, 0x5a}, 0x03},
-	{PRO_DMOD, 0xf905, {0x01}, 0x01},
-	{PRO_DMOD, 0xfb06, {0x03}, 0x01},
-	{PRO_DMOD, 0xfd8b, {0x00}, 0x01},
-	{0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */
-};
-
-static struct it913xset it9135_61[] = {
-	{PRO_DMOD, 0x0043, {0x00}, 0x01},
-	{PRO_DMOD, 0x0046, {0x61}, 0x01},
-	{PRO_DMOD, 0x0051, {0x01}, 0x01},
-	{PRO_DMOD, 0x005f, {0x00, 0x00}, 0x02},
-	{PRO_DMOD, 0x0068, {0x06}, 0x01},
-	{PRO_DMOD, 0x006a, {0x03}, 0x01},
-	{PRO_DMOD, 0x0070, {0x0a, 0x05, 0x02}, 0x03},
-	{PRO_DMOD, 0x0075, {0x8c, 0x8c, 0x8c, 0x90, 0x01}, 0x05},
-	{PRO_DMOD, 0x007e, {0x04}, 0x01},
-	{PRO_DMOD, 0x0081, {0x0a, 0x12}, 0x02},
-	{PRO_DMOD, 0x0084, {0x0a, 0x33, 0xbc, 0x9c, 0xcc, 0xa8, 0x01}, 0x07},
-	{PRO_DMOD, 0x008e, {0x01}, 0x01},
-	{PRO_DMOD, 0x0092, {0x06, 0x00, 0x00, 0x00, 0x00}, 0x05},
-	{PRO_DMOD, 0x0099, {0x01}, 0x01},
-	{PRO_DMOD, 0x009b, {0x3c, 0x28}, 0x02},
-	{PRO_DMOD, 0x009f, {0xe1, 0xcf}, 0x02},
-	{PRO_DMOD, 0x00a3, {0x01, 0x5c, 0x01, 0x01}, 0x04},
-	{PRO_DMOD, 0x00a9, {0x00, 0x01}, 0x02},
-	{PRO_DMOD, 0x00b0, {0x01}, 0x01},
-	{PRO_DMOD, 0x00b3, {0x02, 0x3a}, 0x02},
-	{PRO_DMOD, 0x00b6, {0x14}, 0x01},
-	{PRO_DMOD, 0x00c0, {0x11, 0x00, 0x05, 0x01, 0x00}, 0x05},
-	{PRO_DMOD, 0x00c6, {0x19, 0x00}, 0x02},
-	{PRO_DMOD, 0x00cb, {0x32, 0x2c, 0x4f, 0x30}, 0x04},
-	{PRO_DMOD, 0x00f3, {0x05, 0xa0, 0x8c}, 0x03},
-	{PRO_DMOD, 0x00f8, {0x03, 0x06, 0x06}, 0x03},
-	{PRO_DMOD, 0x00fc, {	0x03, 0x03, 0x02, 0x08, 0x50, 0x7b, 0x8c,
-				0x01, 0x02, 0xc8, 0x00}, 0x0b},
-	{PRO_DMOD, 0x0109, {0x02}, 0x01},
-	{PRO_DMOD, 0x0115, {0x0a, 0x03}, 0x02},
-	{PRO_DMOD, 0x011a, {0xc6}, 0x01},
-	{PRO_DMOD, 0x0124, {0xa8}, 0x01},
-	{PRO_DMOD, 0x0127, {0x00}, 0x01},
-	{PRO_DMOD, 0x012a, {0x59, 0x50, 0x47, 0x42}, 0x04},
-	{PRO_DMOD, 0x0137, {0x00}, 0x01},
-	{PRO_DMOD, 0x013b, {0x05}, 0x01},
-	{PRO_DMOD, 0x013f, {0x5b}, 0x01},
-	{PRO_DMOD, 0x0141, {	0x59, 0xf9, 0x59, 0x59, 0x8c, 0x8c, 0x8c,
-				0x7b, 0x8c, 0x50, 0x8c, 0x8c, 0xa8, 0xc6,
-				0x33}, 0x0f},
-	{PRO_DMOD, 0x0151, {0x28}, 0x01},
-	{PRO_DMOD, 0x0153, {0xcc}, 0x01},
-	{PRO_DMOD, 0x0178, {0x09}, 0x01},
-	{PRO_DMOD, 0x0181, {0x9c, 0x76}, 0x02},
-	{PRO_DMOD, 0x0185, {0x28}, 0x01},
-	{PRO_DMOD, 0x0187, {0x01, 0x00, 0xaa, 0x02, 0x80}, 0x05},
-	{PRO_DMOD, 0xed02, {0xff}, 0x01},
-	{PRO_DMOD, 0xee42, {0xff}, 0x01},
-	{PRO_DMOD, 0xee82, {0xff}, 0x01},
-	{PRO_DMOD, 0xf000, {0x0f}, 0x01},
-	{PRO_DMOD, 0xf01f, {0x8c, 0x00}, 0x02},
-	{PRO_DMOD, 0xf029, {0x8c, 0x00, 0x00}, 0x03},
-	{PRO_DMOD, 0xf064, {0x03, 0xf9, 0x03, 0x01}, 0x04},
-	{PRO_DMOD, 0xf06f, {0xe0, 0x03}, 0x02},
-	{PRO_DMOD, 0xf072, {0x0f, 0x03}, 0x02},
-	{PRO_DMOD, 0xf077, {0x01, 0x00}, 0x02},
-	{PRO_DMOD, 0xf087, {0x00}, 0x01},
-	{PRO_DMOD, 0xf09b, {0x3f, 0x00, 0x20, 0x00, 0x0c, 0x00}, 0x06},
-	{PRO_DMOD, 0xf130, {0x04}, 0x01},
-	{PRO_DMOD, 0xf132, {0x04}, 0x01},
-	{PRO_DMOD, 0xf144, {0x1a}, 0x01},
-	{PRO_DMOD, 0xf146, {0x00}, 0x01},
-	{PRO_DMOD, 0xf14a, {0x01}, 0x01},
-	{PRO_DMOD, 0xf14c, {0x00, 0x00}, 0x02},
-	{PRO_DMOD, 0xf14f, {0x04}, 0x01},
-	{PRO_DMOD, 0xf158, {0x7f}, 0x01},
-	{PRO_DMOD, 0xf15a, {0x00, 0x08}, 0x02},
-	{PRO_DMOD, 0xf15d, {0x03, 0x05}, 0x02},
-	{PRO_DMOD, 0xf163, {0x05}, 0x01},
-	{PRO_DMOD, 0xf166, {0x01, 0x40, 0x0f}, 0x03},
-	{PRO_DMOD, 0xf17a, {0x00, 0x00}, 0x02},
-	{PRO_DMOD, 0xf183, {0x01}, 0x01},
-	{PRO_DMOD, 0xf19d, {0x40}, 0x01},
-	{PRO_DMOD, 0xf1bc, {0x36, 0x00}, 0x02},
-	{PRO_DMOD, 0xf1cb, {0xa0, 0x01}, 0x02},
-	{PRO_DMOD, 0xf204, {0x10}, 0x01},
-	{PRO_DMOD, 0xf214, {0x00}, 0x01},
-	{PRO_DMOD, 0xf24c, {0x88, 0x95, 0x9a, 0x90}, 0x04},
-	{PRO_DMOD, 0xf25a, {0x07, 0xe8, 0x03, 0xb0, 0x04}, 0x05},
-	{PRO_DMOD, 0xf270, {0x01, 0x02, 0x01, 0x02}, 0x04},
-	{PRO_DMOD, 0xf40e, {0x0a, 0x40, 0x08}, 0x03},
-	{PRO_DMOD, 0xf55f, {0x0a}, 0x01},
-	{PRO_DMOD, 0xf561, {0x15, 0x20}, 0x02},
-	{PRO_DMOD, 0xf5e3, {0x09, 0x01, 0x01}, 0x03},
-	{PRO_DMOD, 0xf600, {	0x05, 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17,
-				0x1f}, 0x08},
-	{PRO_DMOD, 0xf60e, {0x00, 0x04, 0x32, 0x10}, 0x04},
-	{PRO_DMOD, 0xf707, {0xfc, 0x00, 0x37, 0x00}, 0x04},
-	{PRO_DMOD, 0xf78b, {0x01}, 0x01},
-	{PRO_DMOD, 0xf80f, {0x40, 0x54, 0x5a}, 0x03},
-	{PRO_DMOD, 0xf905, {0x01}, 0x01},
-	{PRO_DMOD, 0xfb06, {0x03}, 0x01},
-	{PRO_DMOD, 0xfd8b, {0x00}, 0x01},
-	{0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */
-};
-
-static struct it913xset it9135_62[] = {
-	{PRO_DMOD, 0x0043, {0x00}, 0x01},
-	{PRO_DMOD, 0x0046, {0x62}, 0x01},
-	{PRO_DMOD, 0x0051, {0x01}, 0x01},
-	{PRO_DMOD, 0x005f, {0x00, 0x00}, 0x02},
-	{PRO_DMOD, 0x0068, {0x0a}, 0x01},
-	{PRO_DMOD, 0x006a, {0x03}, 0x01},
-	{PRO_DMOD, 0x0070, {0x0a, 0x05, 0x02}, 0x03},
-	{PRO_DMOD, 0x0075, {0x8c, 0x8c, 0x8c, 0x8c, 0x01}, 0x05},
-	{PRO_DMOD, 0x007e, {0x04}, 0x01},
-	{PRO_DMOD, 0x0081, {0x0a, 0x12}, 0x02},
-	{PRO_DMOD, 0x0084, {	0x0a, 0x33, 0xb8, 0x9c, 0xb2, 0xa6, 0x01},
-				0x07},
-	{PRO_DMOD, 0x008e, {0x01}, 0x01},
-	{PRO_DMOD, 0x0092, {0x06, 0x00, 0x00, 0x00, 0x00}, 0x05},
-	{PRO_DMOD, 0x0099, {0x01}, 0x01},
-	{PRO_DMOD, 0x009b, {0x3c, 0x28}, 0x02},
-	{PRO_DMOD, 0x009f, {0xe1, 0xcf}, 0x02},
-	{PRO_DMOD, 0x00a3, {0x01, 0x5a, 0x01, 0x01}, 0x04},
-	{PRO_DMOD, 0x00a9, {0x00, 0x01}, 0x02},
-	{PRO_DMOD, 0x00b0, {0x01}, 0x01},
-	{PRO_DMOD, 0x00b3, {0x02, 0x3a}, 0x02},
-	{PRO_DMOD, 0x00b6, {0x14}, 0x01},
-	{PRO_DMOD, 0x00c0, {0x11, 0x00, 0x05, 0x01, 0x00}, 0x05},
-	{PRO_DMOD, 0x00c6, {0x19, 0x00}, 0x02},
-	{PRO_DMOD, 0x00cb, {0x32, 0x2c, 0x4f, 0x30}, 0x04},
-	{PRO_DMOD, 0x00f3, {0x05, 0x8c, 0x8c}, 0x03},
-	{PRO_DMOD, 0x00f8, {0x03, 0x06, 0x06}, 0x03},
-	{PRO_DMOD, 0x00fc, {	0x02, 0x03, 0x02, 0x09, 0x50, 0x6e, 0x8c,
-				0x02, 0x02, 0xc2, 0x00}, 0x0b},
-	{PRO_DMOD, 0x0109, {0x02}, 0x01},
-	{PRO_DMOD, 0x0115, {0x0a, 0x03}, 0x02},
-	{PRO_DMOD, 0x011a, {0xb8}, 0x01},
-	{PRO_DMOD, 0x0124, {0xa8}, 0x01},
-	{PRO_DMOD, 0x0127, {0x00}, 0x01},
-	{PRO_DMOD, 0x012a, {0x53, 0x51, 0x4e, 0x43}, 0x04},
-	{PRO_DMOD, 0x0137, {0x00}, 0x01},
-	{PRO_DMOD, 0x013b, {0x05}, 0x01},
-	{PRO_DMOD, 0x013f, {0x5b}, 0x01},
-	{PRO_DMOD, 0x0141, {	0x59, 0xf9, 0x59, 0x19, 0x8c, 0x8c, 0x8c,
-				0x7b, 0x8c, 0x50, 0x70, 0x8c, 0x96, 0xd0,
-				0x33}, 0x0f},
-	{PRO_DMOD, 0x0151, {0x28}, 0x01},
-	{PRO_DMOD, 0x0153, {0xb2}, 0x01},
-	{PRO_DMOD, 0x0178, {0x09}, 0x01},
-	{PRO_DMOD, 0x0181, {0x9c, 0x6e}, 0x02},
-	{PRO_DMOD, 0x0185, {0x24}, 0x01},
-	{PRO_DMOD, 0x0187, {0x00, 0x00, 0xb8, 0x02, 0x80}, 0x05},
-	{PRO_DMOD, 0xed02, {0xff}, 0x01},
-	{PRO_DMOD, 0xee42, {0xff}, 0x01},
-	{PRO_DMOD, 0xee82, {0xff}, 0x01},
-	{PRO_DMOD, 0xf000, {0x0f}, 0x01},
-	{PRO_DMOD, 0xf01f, {0x8c, 0x00}, 0x02},
-	{PRO_DMOD, 0xf029, {0x8c, 0x00, 0x00}, 0x03},
-	{PRO_DMOD, 0xf064, {0x03, 0xf9, 0x03, 0x01}, 0x04},
-	{PRO_DMOD, 0xf06f, {0xe0, 0x03}, 0x02},
-	{PRO_DMOD, 0xf072, {0x0f, 0x03}, 0x02},
-	{PRO_DMOD, 0xf077, {0x01, 0x00}, 0x02},
-	{PRO_DMOD, 0xf087, {0x00}, 0x01},
-	{PRO_DMOD, 0xf09b, {0x3f, 0x00, 0x20, 0x00, 0x0c, 0x00}, 0x06},
-	{PRO_DMOD, 0xf130, {0x04}, 0x01},
-	{PRO_DMOD, 0xf132, {0x04}, 0x01},
-	{PRO_DMOD, 0xf144, {0x1a}, 0x01},
-	{PRO_DMOD, 0xf146, {0x00}, 0x01},
-	{PRO_DMOD, 0xf14a, {0x01}, 0x01},
-	{PRO_DMOD, 0xf14c, {0x00, 0x00}, 0x02},
-	{PRO_DMOD, 0xf14f, {0x04}, 0x01},
-	{PRO_DMOD, 0xf158, {0x7f}, 0x01},
-	{PRO_DMOD, 0xf15a, {0x00, 0x08}, 0x02},
-	{PRO_DMOD, 0xf15d, {0x03, 0x05}, 0x02},
-	{PRO_DMOD, 0xf163, {0x05}, 0x01},
-	{PRO_DMOD, 0xf166, {0x01, 0x40, 0x0f}, 0x03},
-	{PRO_DMOD, 0xf17a, {0x00, 0x00}, 0x02},
-	{PRO_DMOD, 0xf183, {0x01}, 0x01},
-	{PRO_DMOD, 0xf19d, {0x40}, 0x01},
-	{PRO_DMOD, 0xf1bc, {0x36, 0x00}, 0x02},
-	{PRO_DMOD, 0xf1cb, {0xa0, 0x01}, 0x02},
-	{PRO_DMOD, 0xf204, {0x10}, 0x01},
-	{PRO_DMOD, 0xf214, {0x00}, 0x01},
-	{PRO_DMOD, 0xf24c, {0x88, 0x95, 0x9a, 0x90}, 0x04},
-	{PRO_DMOD, 0xf25a, {0x07, 0xe8, 0x03, 0xb0, 0x04}, 0x05},
-	{PRO_DMOD, 0xf270, {0x01, 0x02, 0x01, 0x02}, 0x04},
-	{PRO_DMOD, 0xf40e, {0x0a, 0x40, 0x08}, 0x03},
-	{PRO_DMOD, 0xf55f, {0x0a}, 0x01},
-	{PRO_DMOD, 0xf561, {0x15, 0x20}, 0x02},
-	{PRO_DMOD, 0xf5e3, {0x09, 0x01, 0x01}, 0x03},
-	{PRO_DMOD, 0xf600, {	0x05, 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17,
-				0x1f}, 0x08},
-	{PRO_DMOD, 0xf60e, {0x00, 0x04, 0x32, 0x10}, 0x04},
-	{PRO_DMOD, 0xf707, {0xfc, 0x00, 0x37, 0x00}, 0x04},
-	{PRO_DMOD, 0xf78b, {0x01}, 0x01},
-	{PRO_DMOD, 0xf80f, {0x40, 0x54, 0x5a}, 0x03},
-	{PRO_DMOD, 0xf905, {0x01}, 0x01},
-	{PRO_DMOD, 0xfb06, {0x03}, 0x01},
-	{PRO_DMOD, 0xfd8b, {0x00}, 0x01},
-	{0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */
-};
-
-/* Tuner setting scripts (still keeping it9137) */
-static struct it913xset it9137_tuner_off[] = {
-	{PRO_DMOD, 0xfba8, {0x01}, 0x01}, /* Tuner Clock Off  */
-	{PRO_DMOD, 0xec40, {0x00}, 0x01}, /* Power Down Tuner */
-	{PRO_DMOD, 0xec02, {0x3f, 0x1f, 0x3f, 0x3f}, 0x04},
-	{PRO_DMOD, 0xec06, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-				0x00, 0x00, 0x00, 0x00}, 0x0c},
-	{PRO_DMOD, 0xec12, {0x00, 0x00, 0x00, 0x00}, 0x04},
-	{PRO_DMOD, 0xec17, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-				0x00}, 0x09},
-	{PRO_DMOD, 0xec22, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-				0x00, 0x00}, 0x0a},
-	{PRO_DMOD, 0xec20, {0x00}, 0x01},
-	{PRO_DMOD, 0xec3f, {0x01}, 0x01},
-	{0xff, 0x0000, {0x00}, 0x00}, /* Terminating Entry */
-};
-
-static struct it913xset set_it9135_template[] = {
-	{PRO_DMOD, 0xee06, {0x00}, 0x01},
-	{PRO_DMOD, 0xec56, {0x00}, 0x01},
-	{PRO_DMOD, 0xec4c, {0x00}, 0x01},
-	{PRO_DMOD, 0xec4d, {0x00}, 0x01},
-	{PRO_DMOD, 0xec4e, {0x00}, 0x01},
-	{PRO_DMOD, 0x011e, {0x00}, 0x01}, /* Older Devices */
-	{PRO_DMOD, 0x011f, {0x00}, 0x01},
-	{0xff, 0x0000, {0x00}, 0x00}, /* Terminating Entry */
-};
-
-static struct it913xset set_it9137_template[] = {
-	{PRO_DMOD, 0xee06, {0x00}, 0x01},
-	{PRO_DMOD, 0xec56, {0x00}, 0x01},
-	{PRO_DMOD, 0xec4c, {0x00}, 0x01},
-	{PRO_DMOD, 0xec4d, {0x00}, 0x01},
-	{PRO_DMOD, 0xec4e, {0x00}, 0x01},
-	{PRO_DMOD, 0xec4f, {0x00}, 0x01},
-	{PRO_DMOD, 0xec50, {0x00}, 0x01},
-	{0xff, 0x0000, {0x00}, 0x00}, /* Terminating Entry */
-};
diff --git a/drivers/media/dvb/frontends/it913x-fe.c b/drivers/media/dvb/frontends/it913x-fe.c
deleted file mode 100644
index 708cbf1..0000000
--- a/drivers/media/dvb/frontends/it913x-fe.c
+++ /dev/null
@@ -1,1045 +0,0 @@
-/*
- *  Driver for it913x-fe Frontend
- *
- *  with support for on chip it9137 integral tuner
- *
- *  Copyright (C) 2011 Malcolm Priestley (tvboxspy@gmail.com)
- *  IT9137 Copyright (C) ITE Tech Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-
-#include "dvb_frontend.h"
-#include "it913x-fe.h"
-#include "it913x-fe-priv.h"
-
-static int it913x_debug;
-
-module_param_named(debug, it913x_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able)).");
-
-#define dprintk(level, args...) do { \
-	if (level & it913x_debug) \
-		printk(KERN_DEBUG "it913x-fe: " args); \
-} while (0)
-
-#define deb_info(args...)  dprintk(0x01, args)
-#define debug_data_snipet(level, name, p) \
-	  dprintk(level, name" (%02x%02x%02x%02x%02x%02x%02x%02x)", \
-		*p, *(p+1), *(p+2), *(p+3), *(p+4), \
-			*(p+5), *(p+6), *(p+7));
-#define info(format, arg...) \
-	printk(KERN_INFO "it913x-fe: " format "\n" , ## arg)
-
-struct it913x_fe_state {
-	struct dvb_frontend frontend;
-	struct i2c_adapter *i2c_adap;
-	struct ite_config *config;
-	u8 i2c_addr;
-	u32 frequency;
-	fe_modulation_t constellation;
-	fe_transmit_mode_t transmission_mode;
-	u8 priority;
-	u32 crystalFrequency;
-	u32 adcFrequency;
-	u8 tuner_type;
-	struct adctable *table;
-	fe_status_t it913x_status;
-	u16 tun_xtal;
-	u8 tun_fdiv;
-	u8 tun_clk_mode;
-	u32 tun_fn_min;
-	u32 ucblocks;
-};
-
-static int it913x_read_reg(struct it913x_fe_state *state,
-		u32 reg, u8 *data, u8 count)
-{
-	int ret;
-	u8 pro = PRO_DMOD; /* All reads from demodulator */
-	u8 b[4];
-	struct i2c_msg msg[2] = {
-		{ .addr = state->i2c_addr + (pro << 1), .flags = 0,
-			.buf = b, .len = sizeof(b) },
-		{ .addr = state->i2c_addr + (pro << 1), .flags = I2C_M_RD,
-			.buf = data, .len = count }
-	};
-	b[0] = (u8) reg >> 24;
-	b[1] = (u8)(reg >> 16) & 0xff;
-	b[2] = (u8)(reg >> 8) & 0xff;
-	b[3] = (u8) reg & 0xff;
-
-	ret = i2c_transfer(state->i2c_adap, msg, 2);
-
-	return ret;
-}
-
-static int it913x_read_reg_u8(struct it913x_fe_state *state, u32 reg)
-{
-	int ret;
-	u8 b[1];
-	ret = it913x_read_reg(state, reg, &b[0], sizeof(b));
-	return (ret < 0) ? -ENODEV : b[0];
-}
-
-static int it913x_write(struct it913x_fe_state *state,
-		u8 pro, u32 reg, u8 buf[], u8 count)
-{
-	u8 b[256];
-	struct i2c_msg msg[1] = {
-		{ .addr = state->i2c_addr + (pro << 1), .flags = 0,
-		  .buf = b, .len = count + 4 }
-	};
-	int ret;
-
-	b[0] = (u8) reg >> 24;
-	b[1] = (u8)(reg >> 16) & 0xff;
-	b[2] = (u8)(reg >> 8) & 0xff;
-	b[3] = (u8) reg & 0xff;
-	memcpy(&b[4], buf, count);
-
-	ret = i2c_transfer(state->i2c_adap, msg, 1);
-
-	if (ret < 0)
-		return -EIO;
-
-	return 0;
-}
-
-static int it913x_write_reg(struct it913x_fe_state *state,
-		u8 pro, u32 reg, u32 data)
-{
-	int ret;
-	u8 b[4];
-	u8 s;
-
-	b[0] = data >> 24;
-	b[1] = (data >> 16) & 0xff;
-	b[2] = (data >> 8) & 0xff;
-	b[3] = data & 0xff;
-	/* expand write as needed */
-	if (data < 0x100)
-		s = 3;
-	else if (data < 0x1000)
-		s = 2;
-	else if (data < 0x100000)
-		s = 1;
-	else
-		s = 0;
-
-	ret = it913x_write(state, pro, reg, &b[s], sizeof(b) - s);
-
-	return ret;
-}
-
-static int it913x_fe_script_loader(struct it913x_fe_state *state,
-		struct it913xset *loadscript)
-{
-	int ret, i;
-	if (loadscript == NULL)
-		return -EINVAL;
-
-	for (i = 0; i < 1000; ++i) {
-		if (loadscript[i].pro == 0xff)
-			break;
-		ret = it913x_write(state, loadscript[i].pro,
-			loadscript[i].address,
-			loadscript[i].reg, loadscript[i].count);
-		if (ret < 0)
-			return -ENODEV;
-	}
-	return 0;
-}
-
-static int it913x_init_tuner(struct it913x_fe_state *state)
-{
-	int ret, i, reg;
-	u8 val, nv_val;
-	u8 nv[] = {48, 32, 24, 16, 12, 8, 6, 4, 2};
-	u8 b[2];
-
-	reg = it913x_read_reg_u8(state, 0xec86);
-	switch (reg) {
-	case 0:
-		state->tun_clk_mode = reg;
-		state->tun_xtal = 2000;
-		state->tun_fdiv = 3;
-		val = 16;
-		break;
-	case -ENODEV:
-		return -ENODEV;
-	case 1:
-	default:
-		state->tun_clk_mode = reg;
-		state->tun_xtal = 640;
-		state->tun_fdiv = 1;
-		val = 6;
-		break;
-	}
-
-	reg = it913x_read_reg_u8(state, 0xed03);
-
-	if (reg < 0)
-		return -ENODEV;
-	else if (reg < sizeof(nv))
-		nv_val = nv[reg];
-	else
-		nv_val = 2;
-
-	for (i = 0; i < 50; i++) {
-		ret = it913x_read_reg(state, 0xed23, &b[0], sizeof(b));
-		reg = (b[1] << 8) + b[0];
-		if (reg > 0)
-			break;
-		if (ret < 0)
-			return -ENODEV;
-		udelay(2000);
-	}
-	state->tun_fn_min = state->tun_xtal * reg;
-	state->tun_fn_min /= (state->tun_fdiv * nv_val);
-	deb_info("Tuner fn_min %d", state->tun_fn_min);
-
-	if (state->config->chip_ver > 1)
-		msleep(50);
-	else {
-		for (i = 0; i < 50; i++) {
-			reg = it913x_read_reg_u8(state, 0xec82);
-			if (reg > 0)
-				break;
-			if (reg < 0)
-				return -ENODEV;
-			udelay(2000);
-		}
-	}
-
-	return it913x_write_reg(state, PRO_DMOD, 0xed81, val);
-}
-
-static int it9137_set_tuner(struct it913x_fe_state *state,
-		u32 bandwidth, u32 frequency_m)
-{
-	struct it913xset *set_tuner = set_it9137_template;
-	int ret, reg;
-	u32 frequency = frequency_m / 1000;
-	u32 freq, temp_f, tmp;
-	u16 iqik_m_cal;
-	u16 n_div;
-	u8 n;
-	u8 l_band;
-	u8 lna_band;
-	u8 bw;
-
-	if (state->config->firmware_ver == 1)
-		set_tuner = set_it9135_template;
-	else
-		set_tuner = set_it9137_template;
-
-	deb_info("Tuner Frequency %d Bandwidth %d", frequency, bandwidth);
-
-	if (frequency >= 51000 && frequency <= 440000) {
-		l_band = 0;
-		lna_band = 0;
-	} else if (frequency > 440000 && frequency <= 484000) {
-		l_band = 1;
-		lna_band = 1;
-	} else if (frequency > 484000 && frequency <= 533000) {
-		l_band = 1;
-		lna_band = 2;
-	} else if (frequency > 533000 && frequency <= 587000) {
-		l_band = 1;
-		lna_band = 3;
-	} else if (frequency > 587000 && frequency <= 645000) {
-		l_band = 1;
-		lna_band = 4;
-	} else if (frequency > 645000 && frequency <= 710000) {
-		l_band = 1;
-		lna_band = 5;
-	} else if (frequency > 710000 && frequency <= 782000) {
-		l_band = 1;
-		lna_band = 6;
-	} else if (frequency > 782000 && frequency <= 860000) {
-		l_band = 1;
-		lna_band = 7;
-	} else if (frequency > 1450000 && frequency <= 1492000) {
-		l_band = 1;
-		lna_band = 0;
-	} else if (frequency > 1660000 && frequency <= 1685000) {
-		l_band = 1;
-		lna_band = 1;
-	} else
-		return -EINVAL;
-	set_tuner[0].reg[0] = lna_band;
-
-	switch (bandwidth) {
-	case 5000000:
-		bw = 0;
-		break;
-	case 6000000:
-		bw = 2;
-		break;
-	case 7000000:
-		bw = 4;
-		break;
-	default:
-	case 8000000:
-		bw = 6;
-		break;
-	}
-
-	set_tuner[1].reg[0] = bw;
-	set_tuner[2].reg[0] = 0xa0 | (l_band << 3);
-
-	if (frequency > 53000 && frequency <= 74000) {
-		n_div = 48;
-		n = 0;
-	} else if (frequency > 74000 && frequency <= 111000) {
-		n_div = 32;
-		n = 1;
-	} else if (frequency > 111000 && frequency <= 148000) {
-		n_div = 24;
-		n = 2;
-	} else if (frequency > 148000 && frequency <= 222000) {
-		n_div = 16;
-		n = 3;
-	} else if (frequency > 222000 && frequency <= 296000) {
-		n_div = 12;
-		n = 4;
-	} else if (frequency > 296000 && frequency <= 445000) {
-		n_div = 8;
-		n = 5;
-	} else if (frequency > 445000 && frequency <= state->tun_fn_min) {
-		n_div = 6;
-		n = 6;
-	} else if (frequency > state->tun_fn_min && frequency <= 950000) {
-		n_div = 4;
-		n = 7;
-	} else if (frequency > 1450000 && frequency <= 1680000) {
-		n_div = 2;
-		n = 0;
-	} else
-		return -EINVAL;
-
-	reg = it913x_read_reg_u8(state, 0xed81);
-	iqik_m_cal = (u16)reg * n_div;
-
-	if (reg < 0x20) {
-		if (state->tun_clk_mode == 0)
-			iqik_m_cal = (iqik_m_cal * 9) >> 5;
-		else
-			iqik_m_cal >>= 1;
-	} else {
-		iqik_m_cal = 0x40 - iqik_m_cal;
-		if (state->tun_clk_mode == 0)
-			iqik_m_cal = ~((iqik_m_cal * 9) >> 5);
-		else
-			iqik_m_cal = ~(iqik_m_cal >> 1);
-	}
-
-	temp_f = frequency * (u32)n_div * (u32)state->tun_fdiv;
-	freq = temp_f / state->tun_xtal;
-	tmp = freq * state->tun_xtal;
-
-	if ((temp_f - tmp) >= (state->tun_xtal >> 1))
-		freq++;
-
-	freq += (u32) n << 13;
-	/* Frequency OMEGA_IQIK_M_CAL_MID*/
-	temp_f = freq + (u32)iqik_m_cal;
-
-	set_tuner[3].reg[0] =  temp_f & 0xff;
-	set_tuner[4].reg[0] =  (temp_f >> 8) & 0xff;
-
-	deb_info("High Frequency = %04x", temp_f);
-
-	/* Lower frequency */
-	set_tuner[5].reg[0] =  freq & 0xff;
-	set_tuner[6].reg[0] =  (freq >> 8) & 0xff;
-
-	deb_info("low Frequency = %04x", freq);
-
-	ret = it913x_fe_script_loader(state, set_tuner);
-
-	return (ret < 0) ? -ENODEV : 0;
-}
-
-static int it913x_fe_select_bw(struct it913x_fe_state *state,
-			u32 bandwidth, u32 adcFrequency)
-{
-	int ret, i;
-	u8 buffer[256];
-	u32 coeff[8];
-	u16 bfsfcw_fftinx_ratio;
-	u16 fftinx_bfsfcw_ratio;
-	u8 count;
-	u8 bw;
-	u8 adcmultiplier;
-
-	deb_info("Bandwidth %d Adc %d", bandwidth, adcFrequency);
-
-	switch (bandwidth) {
-	case 5000000:
-		bw = 3;
-		break;
-	case 6000000:
-		bw = 0;
-		break;
-	case 7000000:
-		bw = 1;
-		break;
-	default:
-	case 8000000:
-		bw = 2;
-		break;
-	}
-	ret = it913x_write_reg(state, PRO_DMOD, REG_BW, bw);
-
-	if (state->table == NULL)
-		return -EINVAL;
-
-	/* In write order */
-	coeff[0] = state->table[bw].coeff_1_2048;
-	coeff[1] = state->table[bw].coeff_2_2k;
-	coeff[2] = state->table[bw].coeff_1_8191;
-	coeff[3] = state->table[bw].coeff_1_8192;
-	coeff[4] = state->table[bw].coeff_1_8193;
-	coeff[5] = state->table[bw].coeff_2_8k;
-	coeff[6] = state->table[bw].coeff_1_4096;
-	coeff[7] = state->table[bw].coeff_2_4k;
-	bfsfcw_fftinx_ratio = state->table[bw].bfsfcw_fftinx_ratio;
-	fftinx_bfsfcw_ratio = state->table[bw].fftinx_bfsfcw_ratio;
-
-	/* ADC multiplier */
-	ret = it913x_read_reg_u8(state, ADC_X_2);
-	if (ret < 0)
-		return -EINVAL;
-
-	adcmultiplier = ret;
-
-	count = 0;
-
-	/*  Build Buffer for COEFF Registers */
-	for (i = 0; i < 8; i++) {
-		if (adcmultiplier == 1)
-			coeff[i] /= 2;
-		buffer[count++] = (coeff[i] >> 24) & 0x3;
-		buffer[count++] = (coeff[i] >> 16) & 0xff;
-		buffer[count++] = (coeff[i] >> 8) & 0xff;
-		buffer[count++] = coeff[i] & 0xff;
-	}
-
-	/* bfsfcw_fftinx_ratio register 0x21-0x22 */
-	buffer[count++] = bfsfcw_fftinx_ratio & 0xff;
-	buffer[count++] = (bfsfcw_fftinx_ratio >> 8) & 0xff;
-	/* fftinx_bfsfcw_ratio register 0x23-0x24 */
-	buffer[count++] = fftinx_bfsfcw_ratio & 0xff;
-	buffer[count++] = (fftinx_bfsfcw_ratio >> 8) & 0xff;
-	/* start at COEFF_1_2048 and write through to fftinx_bfsfcw_ratio*/
-	ret = it913x_write(state, PRO_DMOD, COEFF_1_2048, buffer, count);
-
-	for (i = 0; i < 42; i += 8)
-		debug_data_snipet(0x1, "Buffer", &buffer[i]);
-
-	return ret;
-}
-
-
-
-static int it913x_fe_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct it913x_fe_state *state = fe->demodulator_priv;
-	int ret, i;
-	fe_status_t old_status = state->it913x_status;
-	*status = 0;
-
-	if (state->it913x_status == 0) {
-		ret = it913x_read_reg_u8(state, EMPTY_CHANNEL_STATUS);
-		if (ret == 0x1) {
-			*status |= FE_HAS_SIGNAL;
-			for (i = 0; i < 40; i++) {
-				ret = it913x_read_reg_u8(state, MP2IF_SYNC_LK);
-				if (ret == 0x1)
-					break;
-				msleep(25);
-			}
-			if (ret == 0x1)
-				*status |= FE_HAS_CARRIER
-					| FE_HAS_VITERBI
-					| FE_HAS_SYNC;
-			state->it913x_status = *status;
-		}
-	}
-
-	if (state->it913x_status & FE_HAS_SYNC) {
-		ret = it913x_read_reg_u8(state, TPSD_LOCK);
-		if (ret == 0x1)
-			*status |= FE_HAS_LOCK
-				| state->it913x_status;
-		else
-			state->it913x_status = 0;
-		if (old_status != state->it913x_status)
-			ret = it913x_write_reg(state, PRO_LINK, GPIOH3_O, ret);
-	}
-
-	return 0;
-}
-
-/* FEC values based on fe_code_rate_t non supported values 0*/
-int it913x_qpsk_pval[] = {0, -93, -91, -90, 0, -89, -88};
-int it913x_16qam_pval[] = {0, -87, -85, -84, 0, -83, -82};
-int it913x_64qam_pval[] = {0, -82, -80, -78, 0, -77, -76};
-
-static int it913x_get_signal_strength(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct it913x_fe_state *state = fe->demodulator_priv;
-	u8 code_rate;
-	int ret, temp;
-	u8 lna_gain_os;
-
-	ret = it913x_read_reg_u8(state, VAR_P_INBAND);
-	if (ret < 0)
-		return ret;
-
-	/* VHF/UHF gain offset */
-	if (state->frequency < 300000000)
-		lna_gain_os = 7;
-	else
-		lna_gain_os = 14;
-
-	temp = (ret - 100) - lna_gain_os;
-
-	if (state->priority == PRIORITY_HIGH)
-		code_rate = p->code_rate_HP;
-	else
-		code_rate = p->code_rate_LP;
-
-	if (code_rate >= ARRAY_SIZE(it913x_qpsk_pval))
-		return -EINVAL;
-
-	deb_info("Reg VAR_P_INBAND:%d Calc Offset Value:%d", ret, temp);
-
-	/* Apply FEC offset values*/
-	switch (p->modulation) {
-	case QPSK:
-		temp -= it913x_qpsk_pval[code_rate];
-		break;
-	case QAM_16:
-		temp -= it913x_16qam_pval[code_rate];
-		break;
-	case QAM_64:
-		temp -= it913x_64qam_pval[code_rate];
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (temp < -15)
-		ret = 0;
-	else if ((-15 <= temp) && (temp < 0))
-		ret = (2 * (temp + 15)) / 3;
-	else if ((0 <= temp) && (temp < 20))
-		ret = 4 * temp + 10;
-	else if ((20 <= temp) && (temp < 35))
-		ret = (2 * (temp - 20)) / 3 + 90;
-	else if (temp >= 35)
-		ret = 100;
-
-	deb_info("Signal Strength :%d", ret);
-
-	return ret;
-}
-
-static int it913x_fe_read_signal_strength(struct dvb_frontend *fe,
-		u16 *strength)
-{
-	struct it913x_fe_state *state = fe->demodulator_priv;
-	int ret = 0;
-	if (state->config->read_slevel) {
-		if (state->it913x_status & FE_HAS_SIGNAL)
-			ret = it913x_read_reg_u8(state, SIGNAL_LEVEL);
-	} else
-		ret = it913x_get_signal_strength(fe);
-
-	if (ret >= 0)
-		*strength = (u16)((u32)ret * 0xffff / 0x64);
-
-	return (ret < 0) ? -ENODEV : 0;
-}
-
-static int it913x_fe_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct it913x_fe_state *state = fe->demodulator_priv;
-	int ret;
-	u8 reg[3];
-	u32 snr_val, snr_min, snr_max;
-	u32 temp;
-
-	ret = it913x_read_reg(state, 0x2c, reg, sizeof(reg));
-
-	snr_val = (u32)(reg[2] << 16) | (reg[1] << 8) | reg[0];
-
-	ret |= it913x_read_reg(state, 0xf78b, reg, 1);
-	if (reg[0])
-		snr_val /= reg[0];
-
-	if (state->transmission_mode == TRANSMISSION_MODE_2K)
-		snr_val *= 4;
-	else if (state->transmission_mode == TRANSMISSION_MODE_4K)
-		snr_val *= 2;
-
-	if (state->constellation == QPSK) {
-		snr_min = 0xb4711;
-		snr_max = 0x191451;
-	} else if (state->constellation == QAM_16) {
-		snr_min = 0x4f0d5;
-		snr_max = 0xc7925;
-	} else if (state->constellation == QAM_64) {
-		snr_min = 0x256d0;
-		snr_max = 0x626be;
-	} else
-		return -EINVAL;
-
-	if (snr_val < snr_min)
-		*snr = 0;
-	else if (snr_val < snr_max) {
-		temp = (snr_val - snr_min) >> 5;
-		temp *= 0xffff;
-		temp /= (snr_max - snr_min) >> 5;
-		*snr = (u16)temp;
-	} else
-		*snr = 0xffff;
-
-	return (ret < 0) ? -ENODEV : 0;
-}
-
-static int it913x_fe_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct it913x_fe_state *state = fe->demodulator_priv;
-	u8 reg[5];
-	/* Read Aborted Packets and Pre-Viterbi error rate 5 bytes */
-	it913x_read_reg(state, RSD_ABORT_PKT_LSB, reg, sizeof(reg));
-	state->ucblocks += (u32)(reg[1] << 8) | reg[0];
-	*ber = (u32)(reg[4] << 16) | (reg[3] << 8) | reg[2];
-	return 0;
-}
-
-static int it913x_fe_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	struct it913x_fe_state *state = fe->demodulator_priv;
-	int ret;
-	u8 reg[2];
-	/* Aborted Packets */
-	ret = it913x_read_reg(state, RSD_ABORT_PKT_LSB, reg, sizeof(reg));
-	state->ucblocks += (u32)(reg[1] << 8) | reg[0];
-	*ucblocks = state->ucblocks;
-	return ret;
-}
-
-static int it913x_fe_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct it913x_fe_state *state = fe->demodulator_priv;
-	u8 reg[8];
-
-	it913x_read_reg(state, REG_TPSD_TX_MODE, reg, sizeof(reg));
-
-	if (reg[3] < 3)
-		p->modulation = fe_con[reg[3]];
-
-	if (reg[0] < 3)
-		p->transmission_mode = fe_mode[reg[0]];
-
-	if (reg[1] < 4)
-		p->guard_interval = fe_gi[reg[1]];
-
-	if (reg[2] < 4)
-		p->hierarchy = fe_hi[reg[2]];
-
-	state->priority = reg[5];
-
-	p->code_rate_HP = (reg[6] < 6) ? fe_code[reg[6]] : FEC_NONE;
-	p->code_rate_LP = (reg[7] < 6) ? fe_code[reg[7]] : FEC_NONE;
-
-	/* Update internal state to reflect the autodetected props */
-	state->constellation = p->modulation;
-	state->transmission_mode = p->transmission_mode;
-
-	return 0;
-}
-
-static int it913x_fe_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct it913x_fe_state *state = fe->demodulator_priv;
-	int i;
-	u8 empty_ch, last_ch;
-
-	state->it913x_status = 0;
-
-	/* Set bw*/
-	it913x_fe_select_bw(state, p->bandwidth_hz,
-		state->adcFrequency);
-
-	/* Training Mode Off */
-	it913x_write_reg(state, PRO_LINK, TRAINING_MODE, 0x0);
-
-	/* Clear Empty Channel */
-	it913x_write_reg(state, PRO_DMOD, EMPTY_CHANNEL_STATUS, 0x0);
-
-	/* Clear bits */
-	it913x_write_reg(state, PRO_DMOD, MP2IF_SYNC_LK, 0x0);
-	/* LED on */
-	it913x_write_reg(state, PRO_LINK, GPIOH3_O, 0x1);
-	/* Select Band*/
-	if ((p->frequency >= 51000000) && (p->frequency <= 230000000))
-		i = 0;
-	else if ((p->frequency >= 350000000) && (p->frequency <= 900000000))
-			i = 1;
-	else if ((p->frequency >= 1450000000) && (p->frequency <= 1680000000))
-			i = 2;
-	else
-		return -EOPNOTSUPP;
-
-	it913x_write_reg(state, PRO_DMOD, FREE_BAND, i);
-
-	deb_info("Frontend Set Tuner Type %02x", state->tuner_type);
-	switch (state->tuner_type) {
-	case IT9135_38:
-	case IT9135_51:
-	case IT9135_52:
-	case IT9135_60:
-	case IT9135_61:
-	case IT9135_62:
-		it9137_set_tuner(state,
-			p->bandwidth_hz, p->frequency);
-		break;
-	default:
-		if (fe->ops.tuner_ops.set_params) {
-			fe->ops.tuner_ops.set_params(fe);
-			if (fe->ops.i2c_gate_ctrl)
-				fe->ops.i2c_gate_ctrl(fe, 0);
-		}
-		break;
-	}
-	/* LED off */
-	it913x_write_reg(state, PRO_LINK, GPIOH3_O, 0x0);
-	/* Trigger ofsm */
-	it913x_write_reg(state, PRO_DMOD, TRIGGER_OFSM, 0x0);
-	last_ch = 2;
-	for (i = 0; i < 40; ++i) {
-		empty_ch = it913x_read_reg_u8(state, EMPTY_CHANNEL_STATUS);
-		if (last_ch == 1 && empty_ch == 1)
-			break;
-		if (last_ch == 2 && empty_ch == 2)
-			return 0;
-		last_ch = empty_ch;
-		msleep(25);
-	}
-	for (i = 0; i < 40; ++i) {
-		if (it913x_read_reg_u8(state, D_TPSD_LOCK) == 1)
-			break;
-		msleep(25);
-	}
-
-	state->frequency = p->frequency;
-	return 0;
-}
-
-static int it913x_fe_suspend(struct it913x_fe_state *state)
-{
-	int ret, i;
-	u8 b;
-
-	ret = it913x_write_reg(state, PRO_DMOD, SUSPEND_FLAG, 0x1);
-
-	ret |= it913x_write_reg(state, PRO_DMOD, TRIGGER_OFSM, 0x0);
-
-	for (i = 0; i < 128; i++) {
-		ret = it913x_read_reg(state, SUSPEND_FLAG, &b, 1);
-		if (ret < 0)
-			return -ENODEV;
-		if (b == 0)
-			break;
-
-	}
-
-	ret |= it913x_write_reg(state, PRO_DMOD, AFE_MEM0, 0x8);
-	/* Turn LED off */
-	ret |= it913x_write_reg(state, PRO_LINK, GPIOH3_O, 0x0);
-
-	ret |= it913x_fe_script_loader(state, it9137_tuner_off);
-
-	return (ret < 0) ? -ENODEV : 0;
-}
-
-/* Power sequence */
-/* Power Up	Tuner on -> Frontend suspend off -> Tuner clk on */
-/* Power Down	Frontend suspend on -> Tuner clk off -> Tuner off */
-
-static int it913x_fe_sleep(struct dvb_frontend *fe)
-{
-	struct it913x_fe_state *state = fe->demodulator_priv;
-	return it913x_fe_suspend(state);
-}
-
-static u32 compute_div(u32 a, u32 b, u32 x)
-{
-	u32 res = 0;
-	u32 c = 0;
-	u32 i = 0;
-
-	if (a > b) {
-		c = a / b;
-		a = a - c * b;
-	}
-
-	for (i = 0; i < x; i++) {
-		if (a >= b) {
-			res += 1;
-			a -= b;
-		}
-		a <<= 1;
-		res <<= 1;
-	}
-
-	res = (c << x) + res;
-
-	return res;
-}
-
-static int it913x_fe_start(struct it913x_fe_state *state)
-{
-	struct it913xset *set_lna;
-	struct it913xset *set_mode;
-	int ret;
-	u8 adf = (state->config->adf & 0xf);
-	u32 adc, xtal;
-	u8 b[4];
-
-	if (state->config->chip_ver == 1)
-		ret = it913x_init_tuner(state);
-
-	info("ADF table value	:%02x", adf);
-
-	if (adf < 10) {
-		state->crystalFrequency = fe_clockTable[adf].xtal ;
-		state->table = fe_clockTable[adf].table;
-		state->adcFrequency = state->table->adcFrequency;
-
-		adc = compute_div(state->adcFrequency, 1000000ul, 19ul);
-		xtal = compute_div(state->crystalFrequency, 1000000ul, 19ul);
-
-	} else
-		return -EINVAL;
-
-	/* Set LED indicator on GPIOH3 */
-	ret = it913x_write_reg(state, PRO_LINK, GPIOH3_EN, 0x1);
-	ret |= it913x_write_reg(state, PRO_LINK, GPIOH3_ON, 0x1);
-	ret |= it913x_write_reg(state, PRO_LINK, GPIOH3_O, 0x1);
-
-	ret |= it913x_write_reg(state, PRO_LINK, 0xf641, state->tuner_type);
-	ret |= it913x_write_reg(state, PRO_DMOD, 0xf5ca, 0x01);
-	ret |= it913x_write_reg(state, PRO_DMOD, 0xf715, 0x01);
-
-	b[0] = xtal & 0xff;
-	b[1] = (xtal >> 8) & 0xff;
-	b[2] = (xtal >> 16) & 0xff;
-	b[3] = (xtal >> 24);
-	ret |= it913x_write(state, PRO_DMOD, XTAL_CLK, b , 4);
-
-	b[0] = adc & 0xff;
-	b[1] = (adc >> 8) & 0xff;
-	b[2] = (adc >> 16) & 0xff;
-	ret |= it913x_write(state, PRO_DMOD, ADC_FREQ, b, 3);
-
-	if (state->config->adc_x2)
-		ret |= it913x_write_reg(state, PRO_DMOD, ADC_X_2, 0x01);
-	b[0] = 0;
-	b[1] = 0;
-	b[2] = 0;
-	ret |= it913x_write(state, PRO_DMOD, 0x0029, b, 3);
-
-	info("Crystal Frequency :%d Adc Frequency :%d ADC X2: %02x",
-		state->crystalFrequency, state->adcFrequency,
-			state->config->adc_x2);
-	deb_info("Xtal value :%04x Adc value :%04x", xtal, adc);
-
-	if (ret < 0)
-		return -ENODEV;
-
-	/* v1 or v2 tuner script */
-	if (state->config->chip_ver > 1)
-		ret = it913x_fe_script_loader(state, it9135_v2);
-	else
-		ret = it913x_fe_script_loader(state, it9135_v1);
-	if (ret < 0)
-		return ret;
-
-	/* LNA Scripts */
-	switch (state->tuner_type) {
-	case IT9135_51:
-		set_lna = it9135_51;
-		break;
-	case IT9135_52:
-		set_lna = it9135_52;
-		break;
-	case IT9135_60:
-		set_lna = it9135_60;
-		break;
-	case IT9135_61:
-		set_lna = it9135_61;
-		break;
-	case IT9135_62:
-		set_lna = it9135_62;
-		break;
-	case IT9135_38:
-	default:
-		set_lna = it9135_38;
-	}
-	info("Tuner LNA type :%02x", state->tuner_type);
-
-	ret = it913x_fe_script_loader(state, set_lna);
-	if (ret < 0)
-		return ret;
-
-	if (state->config->chip_ver == 2) {
-		ret = it913x_write_reg(state, PRO_DMOD, TRIGGER_OFSM, 0x1);
-		ret |= it913x_write_reg(state, PRO_LINK, PADODPU, 0x0);
-		ret |= it913x_write_reg(state, PRO_LINK, AGC_O_D, 0x0);
-		ret |= it913x_init_tuner(state);
-	}
-	if (ret < 0)
-		return -ENODEV;
-
-	/* Always solo frontend */
-	set_mode = set_solo_fe;
-	ret |= it913x_fe_script_loader(state, set_mode);
-
-	ret |= it913x_fe_suspend(state);
-	return (ret < 0) ? -ENODEV : 0;
-}
-
-static int it913x_fe_init(struct dvb_frontend *fe)
-{
-	struct it913x_fe_state *state = fe->demodulator_priv;
-	int ret = 0;
-	/* Power Up Tuner - common all versions */
-	ret = it913x_write_reg(state, PRO_DMOD, 0xec40, 0x1);
-
-	ret |= it913x_fe_script_loader(state, init_1);
-
-	ret |= it913x_write_reg(state, PRO_DMOD, AFE_MEM0, 0x0);
-
-	ret |= it913x_write_reg(state, PRO_DMOD, 0xfba8, 0x0);
-
-	return (ret < 0) ? -ENODEV : 0;
-}
-
-static void it913x_fe_release(struct dvb_frontend *fe)
-{
-	struct it913x_fe_state *state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops it913x_fe_ofdm_ops;
-
-struct dvb_frontend *it913x_fe_attach(struct i2c_adapter *i2c_adap,
-		u8 i2c_addr, struct ite_config *config)
-{
-	struct it913x_fe_state *state = NULL;
-	int ret;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct it913x_fe_state), GFP_KERNEL);
-	if (state == NULL)
-		return NULL;
-	if (config == NULL)
-		goto error;
-
-	state->i2c_adap = i2c_adap;
-	state->i2c_addr = i2c_addr;
-	state->config = config;
-
-	switch (state->config->tuner_id_0) {
-	case IT9135_51:
-	case IT9135_52:
-	case IT9135_60:
-	case IT9135_61:
-	case IT9135_62:
-		state->tuner_type = state->config->tuner_id_0;
-		break;
-	default:
-	case IT9135_38:
-		state->tuner_type = IT9135_38;
-	}
-
-	ret = it913x_fe_start(state);
-	if (ret < 0)
-		goto error;
-
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &it913x_fe_ofdm_ops,
-			sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-
-	return &state->frontend;
-error:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(it913x_fe_attach);
-
-static struct dvb_frontend_ops it913x_fe_ofdm_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name			= "it913x-fe DVB-T",
-		.frequency_min		= 51000000,
-		.frequency_max		= 1680000000,
-		.frequency_stepsize	= 62500,
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
-			FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
-			FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO |
-			FE_CAN_GUARD_INTERVAL_AUTO |
-			FE_CAN_HIERARCHY_AUTO,
-	},
-
-	.release = it913x_fe_release,
-
-	.init = it913x_fe_init,
-	.sleep = it913x_fe_sleep,
-
-	.set_frontend = it913x_fe_set_frontend,
-	.get_frontend = it913x_fe_get_frontend,
-
-	.read_status = it913x_fe_read_status,
-	.read_signal_strength = it913x_fe_read_signal_strength,
-	.read_snr = it913x_fe_read_snr,
-	.read_ber = it913x_fe_read_ber,
-	.read_ucblocks = it913x_fe_read_ucblocks,
-};
-
-MODULE_DESCRIPTION("it913x Frontend and it9137 tuner");
-MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com");
-MODULE_VERSION("1.15");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/it913x-fe.h b/drivers/media/dvb/frontends/it913x-fe.h
deleted file mode 100644
index 07fa459..0000000
--- a/drivers/media/dvb/frontends/it913x-fe.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- *  Driver for it913x Frontend
- *
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
- */
-
-#ifndef IT913X_FE_H
-#define IT913X_FE_H
-
-#include <linux/dvb/frontend.h>
-#include "dvb_frontend.h"
-
-struct ite_config {
-	u8 chip_ver;
-	u16 chip_type;
-	u32 firmware;
-	u8 firmware_ver;
-	u8 adc_x2;
-	u8 tuner_id_0;
-	u8 tuner_id_1;
-	u8 dual_mode;
-	u8 adf;
-	/* option to read SIGNAL_LEVEL */
-	u8 read_slevel;
-};
-
-#if defined(CONFIG_DVB_IT913X_FE) || (defined(CONFIG_DVB_IT913X_FE_MODULE) && \
-defined(MODULE))
-extern struct dvb_frontend *it913x_fe_attach(struct i2c_adapter *i2c_adap,
-			u8 i2c_addr, struct ite_config *config);
-#else
-static inline struct dvb_frontend *it913x_fe_attach(
-		struct i2c_adapter *i2c_adap,
-			u8 i2c_addr, struct ite_config *config)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_IT913X_FE */
-#define I2C_BASE_ADDR		0x10
-#define DEV_0			0x0
-#define DEV_1			0x10
-#define PRO_LINK		0x0
-#define PRO_DMOD		0x1
-#define DEV_0_DMOD		(PRO_DMOD << 0x7)
-#define DEV_1_DMOD		(DEV_0_DMOD | DEV_1)
-#define CHIP2_I2C_ADDR		0x3a
-
-#define AFE_MEM0		0xfb24
-
-#define MP2_SW_RST		0xf99d
-#define MP2IF2_SW_RST		0xf9a4
-
-#define	PADODPU			0xd827
-#define THIRDODPU		0xd828
-#define AGC_O_D			0xd829
-
-#define EP0_TX_EN		0xdd11
-#define EP0_TX_NAK		0xdd13
-#define EP4_TX_LEN_LSB		0xdd88
-#define EP4_TX_LEN_MSB		0xdd89
-#define EP4_MAX_PKT		0xdd0c
-#define EP5_TX_LEN_LSB		0xdd8a
-#define EP5_TX_LEN_MSB		0xdd8b
-#define EP5_MAX_PKT		0xdd0d
-
-#define IO_MUX_POWER_CLK	0xd800
-#define CLK_O_EN		0xd81a
-#define I2C_CLK			0xf103
-#define I2C_CLK_100		0x7
-#define I2C_CLK_400		0x1a
-
-#define D_TPSD_LOCK		0xf5a9
-#define MP2IF2_EN		0xf9a3
-#define MP2IF_SERIAL		0xf985
-#define TSIS_ENABLE		0xf9cd
-#define MP2IF2_HALF_PSB		0xf9a5
-#define MP2IF_STOP_EN		0xf9b5
-#define MPEG_FULL_SPEED		0xf990
-#define TOP_HOSTB_SER_MODE	0xd91c
-
-#define PID_RST			0xf992
-#define PID_EN			0xf993
-#define PID_INX_EN		0xf994
-#define PID_INX			0xf995
-#define PID_LSB			0xf996
-#define PID_MSB			0xf997
-
-#define MP2IF_MPEG_PAR_MODE	0xf986
-#define DCA_UPPER_CHIP		0xf731
-#define DCA_LOWER_CHIP		0xf732
-#define DCA_PLATCH		0xf730
-#define DCA_FPGA_LATCH		0xf778
-#define DCA_STAND_ALONE		0xf73c
-#define DCA_ENABLE		0xf776
-
-#define DVBT_INTEN		0xf41f
-#define DVBT_ENABLE		0xf41a
-#define HOSTB_DCA_LOWER		0xd91f
-#define HOSTB_MPEG_PAR_MODE	0xd91b
-#define HOSTB_MPEG_SER_MODE	0xd91c
-#define HOSTB_MPEG_SER_DO7	0xd91d
-#define HOSTB_DCA_UPPER		0xd91e
-#define PADMISCDR2		0xd830
-#define PADMISCDR4		0xd831
-#define PADMISCDR8		0xd832
-#define PADMISCDRSR		0xd833
-#define LOCK3_OUT		0xd8fd
-
-#define GPIOH1_O		0xd8af
-#define GPIOH1_EN		0xd8b0
-#define GPIOH1_ON		0xd8b1
-#define GPIOH3_O		0xd8b3
-#define GPIOH3_EN		0xd8b4
-#define GPIOH3_ON		0xd8b5
-#define GPIOH5_O		0xd8bb
-#define GPIOH5_EN		0xd8bc
-#define GPIOH5_ON		0xd8bd
-
-#define AFE_MEM0		0xfb24
-
-#define REG_TPSD_TX_MODE	0xf900
-#define REG_TPSD_GI		0xf901
-#define REG_TPSD_HIER		0xf902
-#define REG_TPSD_CONST		0xf903
-#define REG_BW			0xf904
-#define REG_PRIV		0xf905
-#define REG_TPSD_HP_CODE	0xf906
-#define REG_TPSD_LP_CODE	0xf907
-
-#define MP2IF_SYNC_LK		0xf999
-#define ADC_FREQ		0xf1cd
-
-#define TRIGGER_OFSM		0x0000
-/* COEFF Registers start at 0x0001 to 0x0020 */
-#define COEFF_1_2048		0x0001
-#define XTAL_CLK		0x0025
-#define BFS_FCW			0x0029
-
-/* Error Regs */
-#define RSD_ABORT_PKT_LSB	0x0032
-#define RSD_ABORT_PKT_MSB	0x0033
-#define RSD_BIT_ERR_0_7		0x0034
-#define RSD_BIT_ERR_8_15	0x0035
-#define RSD_BIT_ERR_23_16	0x0036
-#define RSD_BIT_COUNT_LSB	0x0037
-#define RSD_BIT_COUNT_MSB	0x0038
-
-#define TPSD_LOCK		0x003c
-#define TRAINING_MODE		0x0040
-#define ADC_X_2			0x0045
-#define TUNER_ID		0x0046
-#define EMPTY_CHANNEL_STATUS	0x0047
-#define SIGNAL_LEVEL		0x0048
-#define SIGNAL_QUALITY		0x0049
-#define EST_SIGNAL_LEVEL	0x004a
-#define FREE_BAND		0x004b
-#define SUSPEND_FLAG		0x004c
-#define VAR_P_INBAND		0x00f7
-
-/* Build in tuner types */
-#define IT9137 0x38
-#define IT9135_38 0x38
-#define IT9135_51 0x51
-#define IT9135_52 0x52
-#define IT9135_60 0x60
-#define IT9135_61 0x61
-#define IT9135_62 0x62
-
-enum {
-	CMD_DEMOD_READ = 0,
-	CMD_DEMOD_WRITE,
-	CMD_TUNER_READ,
-	CMD_TUNER_WRITE,
-	CMD_REG_EEPROM_READ,
-	CMD_REG_EEPROM_WRITE,
-	CMD_DATA_READ,
-	CMD_VAR_READ = 8,
-	CMD_VAR_WRITE,
-	CMD_PLATFORM_GET,
-	CMD_PLATFORM_SET,
-	CMD_IP_CACHE,
-	CMD_IP_ADD,
-	CMD_IP_REMOVE,
-	CMD_PID_ADD,
-	CMD_PID_REMOVE,
-	CMD_SIPSI_GET,
-	CMD_SIPSI_MPE_RESET,
-	CMD_H_PID_ADD = 0x15,
-	CMD_H_PID_REMOVE,
-	CMD_ABORT,
-	CMD_IR_GET,
-	CMD_IR_SET,
-	CMD_FW_DOWNLOAD = 0x21,
-	CMD_QUERYINFO,
-	CMD_BOOT,
-	CMD_FW_DOWNLOAD_BEGIN,
-	CMD_FW_DOWNLOAD_END,
-	CMD_RUN_CODE,
-	CMD_SCATTER_READ = 0x28,
-	CMD_SCATTER_WRITE,
-	CMD_GENERIC_READ,
-	CMD_GENERIC_WRITE
-};
-
-enum {
-	READ_LONG,
-	WRITE_LONG,
-	READ_SHORT,
-	WRITE_SHORT,
-	READ_DATA,
-	WRITE_DATA,
-	WRITE_CMD,
-};
-
-enum {
-	IT9135_AUTO = 0,
-	IT9137_FW,
-	IT9135_V1_FW,
-	IT9135_V2_FW,
-};
-
-#endif /* IT913X_FE_H */
diff --git a/drivers/media/dvb/frontends/itd1000.c b/drivers/media/dvb/frontends/itd1000.c
deleted file mode 100644
index 3164575..0000000
--- a/drivers/media/dvb/frontends/itd1000.c
+++ /dev/null
@@ -1,399 +0,0 @@
-/*
- *  Driver for the Integrant ITD1000 "Zero-IF Tuner IC for Direct Broadcast Satellite"
- *
- *  Copyright (c) 2007-8 Patrick Boettcher <pb@linuxtv.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/delay.h>
-#include <linux/dvb/frontend.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-
-#include "itd1000.h"
-#include "itd1000_priv.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
-
-#define itd_dbg(args...)  do { \
-	if (debug) { \
-		printk(KERN_DEBUG   "ITD1000: " args);\
-	} \
-} while (0)
-
-#define itd_warn(args...) do { \
-	printk(KERN_WARNING "ITD1000: " args); \
-} while (0)
-
-#define itd_info(args...) do { \
-	printk(KERN_INFO    "ITD1000: " args); \
-} while (0)
-
-/* don't write more than one byte with flexcop behind */
-static int itd1000_write_regs(struct itd1000_state *state, u8 reg, u8 v[], u8 len)
-{
-	u8 buf[1+len];
-	struct i2c_msg msg = {
-		.addr = state->cfg->i2c_address, .flags = 0, .buf = buf, .len = len+1
-	};
-	buf[0] = reg;
-	memcpy(&buf[1], v, len);
-
-	/* itd_dbg("wr %02x: %02x\n", reg, v[0]); */
-
-	if (i2c_transfer(state->i2c, &msg, 1) != 1) {
-		printk(KERN_WARNING "itd1000 I2C write failed\n");
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-
-static int itd1000_read_reg(struct itd1000_state *state, u8 reg)
-{
-	u8 val;
-	struct i2c_msg msg[2] = {
-		{ .addr = state->cfg->i2c_address, .flags = 0,        .buf = &reg, .len = 1 },
-		{ .addr = state->cfg->i2c_address, .flags = I2C_M_RD, .buf = &val, .len = 1 },
-	};
-
-	/* ugly flexcop workaround */
-	itd1000_write_regs(state, (reg - 1) & 0xff, &state->shadow[(reg - 1) & 0xff], 1);
-
-	if (i2c_transfer(state->i2c, msg, 2) != 2) {
-		itd_warn("itd1000 I2C read failed\n");
-		return -EREMOTEIO;
-	}
-	return val;
-}
-
-static inline int itd1000_write_reg(struct itd1000_state *state, u8 r, u8 v)
-{
-	int ret = itd1000_write_regs(state, r, &v, 1);
-	state->shadow[r] = v;
-	return ret;
-}
-
-
-static struct {
-	u32 symbol_rate;
-	u8  pgaext  : 4; /* PLLFH */
-	u8  bbgvmin : 4; /* BBGVMIN */
-} itd1000_lpf_pga[] = {
-	{        0, 0x8, 0x3 },
-	{  5200000, 0x8, 0x3 },
-	{ 12200000, 0x4, 0x3 },
-	{ 15400000, 0x2, 0x3 },
-	{ 19800000, 0x2, 0x3 },
-	{ 21500000, 0x2, 0x3 },
-	{ 24500000, 0x2, 0x3 },
-	{ 28400000, 0x2, 0x3 },
-	{ 33400000, 0x2, 0x3 },
-	{ 34400000, 0x1, 0x4 },
-	{ 34400000, 0x1, 0x4 },
-	{ 38400000, 0x1, 0x4 },
-	{ 38400000, 0x1, 0x4 },
-	{ 40400000, 0x1, 0x4 },
-	{ 45400000, 0x1, 0x4 },
-};
-
-static void itd1000_set_lpf_bw(struct itd1000_state *state, u32 symbol_rate)
-{
-	u8 i;
-	u8 con1    = itd1000_read_reg(state, CON1)    & 0xfd;
-	u8 pllfh   = itd1000_read_reg(state, PLLFH)   & 0x0f;
-	u8 bbgvmin = itd1000_read_reg(state, BBGVMIN) & 0xf0;
-	u8 bw      = itd1000_read_reg(state, BW)      & 0xf0;
-
-	itd_dbg("symbol_rate = %d\n", symbol_rate);
-
-	/* not sure what is that ? - starting to download the table */
-	itd1000_write_reg(state, CON1, con1 | (1 << 1));
-
-	for (i = 0; i < ARRAY_SIZE(itd1000_lpf_pga); i++)
-		if (symbol_rate < itd1000_lpf_pga[i].symbol_rate) {
-			itd_dbg("symrate: index: %d pgaext: %x, bbgvmin: %x\n", i, itd1000_lpf_pga[i].pgaext, itd1000_lpf_pga[i].bbgvmin);
-			itd1000_write_reg(state, PLLFH,   pllfh | (itd1000_lpf_pga[i].pgaext << 4));
-			itd1000_write_reg(state, BBGVMIN, bbgvmin | (itd1000_lpf_pga[i].bbgvmin));
-			itd1000_write_reg(state, BW,      bw | (i & 0x0f));
-			break;
-		}
-
-	itd1000_write_reg(state, CON1, con1 | (0 << 1));
-}
-
-static struct {
-	u8 vcorg;
-	u32 fmax_rg;
-} itd1000_vcorg[] = {
-	{  1,  920000 },
-	{  2,  971000 },
-	{  3, 1031000 },
-	{  4, 1091000 },
-	{  5, 1171000 },
-	{  6, 1281000 },
-	{  7, 1381000 },
-	{  8,  500000 },	/* this is intentional. */
-	{  9, 1451000 },
-	{ 10, 1531000 },
-	{ 11, 1631000 },
-	{ 12, 1741000 },
-	{ 13, 1891000 },
-	{ 14, 2071000 },
-	{ 15, 2250000 },
-};
-
-static void itd1000_set_vco(struct itd1000_state *state, u32 freq_khz)
-{
-	u8 i;
-	u8 gvbb_i2c     = itd1000_read_reg(state, GVBB_I2C) & 0xbf;
-	u8 vco_chp1_i2c = itd1000_read_reg(state, VCO_CHP1_I2C) & 0x0f;
-	u8 adcout;
-
-	/* reserved bit again (reset ?) */
-	itd1000_write_reg(state, GVBB_I2C, gvbb_i2c | (1 << 6));
-
-	for (i = 0; i < ARRAY_SIZE(itd1000_vcorg); i++) {
-		if (freq_khz < itd1000_vcorg[i].fmax_rg) {
-			itd1000_write_reg(state, VCO_CHP1_I2C, vco_chp1_i2c | (itd1000_vcorg[i].vcorg << 4));
-			msleep(1);
-
-			adcout = itd1000_read_reg(state, PLLLOCK) & 0x0f;
-
-			itd_dbg("VCO: %dkHz: %d -> ADCOUT: %d %02x\n", freq_khz, itd1000_vcorg[i].vcorg, adcout, vco_chp1_i2c);
-
-			if (adcout > 13) {
-				if (!(itd1000_vcorg[i].vcorg == 7 || itd1000_vcorg[i].vcorg == 15))
-					itd1000_write_reg(state, VCO_CHP1_I2C, vco_chp1_i2c | ((itd1000_vcorg[i].vcorg + 1) << 4));
-			} else if (adcout < 2) {
-				if (!(itd1000_vcorg[i].vcorg == 1 || itd1000_vcorg[i].vcorg == 9))
-					itd1000_write_reg(state, VCO_CHP1_I2C, vco_chp1_i2c | ((itd1000_vcorg[i].vcorg - 1) << 4));
-			}
-			break;
-		}
-	}
-}
-
-static const struct {
-	u32 freq;
-	u8 values[10]; /* RFTR, RFST1 - RFST9 */
-} itd1000_fre_values[] = {
-	{ 1075000, { 0x59, 0x1d, 0x1c, 0x17, 0x16, 0x0f, 0x0e, 0x0c, 0x0b, 0x0a } },
-	{ 1250000, { 0x89, 0x1e, 0x1d, 0x17, 0x15, 0x0f, 0x0e, 0x0c, 0x0b, 0x0a } },
-	{ 1450000, { 0x89, 0x1e, 0x1d, 0x17, 0x15, 0x0f, 0x0e, 0x0c, 0x0b, 0x0a } },
-	{ 1650000, { 0x69, 0x1e, 0x1d, 0x17, 0x15, 0x0f, 0x0e, 0x0c, 0x0b, 0x0a } },
-	{ 1750000, { 0x69, 0x1e, 0x17, 0x15, 0x14, 0x0f, 0x0e, 0x0c, 0x0b, 0x0a } },
-	{ 1850000, { 0x69, 0x1d, 0x17, 0x16, 0x14, 0x0f, 0x0e, 0x0d, 0x0b, 0x0a } },
-	{ 1900000, { 0x69, 0x1d, 0x17, 0x15, 0x14, 0x0f, 0x0e, 0x0d, 0x0b, 0x0a } },
-	{ 1950000, { 0x69, 0x1d, 0x17, 0x16, 0x14, 0x13, 0x0e, 0x0d, 0x0b, 0x0a } },
-	{ 2050000, { 0x69, 0x1e, 0x1d, 0x17, 0x16, 0x14, 0x13, 0x0e, 0x0b, 0x0a } },
-	{ 2150000, { 0x69, 0x1d, 0x1c, 0x17, 0x15, 0x14, 0x13, 0x0f, 0x0e, 0x0b } }
-};
-
-
-#define FREF 16
-
-static void itd1000_set_lo(struct itd1000_state *state, u32 freq_khz)
-{
-	int i, j;
-	u32 plln, pllf;
-	u64 tmp;
-
-	plln = (freq_khz * 1000) / 2 / FREF;
-
-	/* Compute the factional part times 1000 */
-	tmp  = plln % 1000000;
-	plln /= 1000000;
-
-	tmp *= 1048576;
-	do_div(tmp, 1000000);
-	pllf = (u32) tmp;
-
-	state->frequency = ((plln * 1000) + (pllf * 1000)/1048576) * 2*FREF;
-	itd_dbg("frequency: %dkHz (wanted) %dkHz (set), PLLF = %d, PLLN = %d\n", freq_khz, state->frequency, pllf, plln);
-
-	itd1000_write_reg(state, PLLNH, 0x80); /* PLLNH */;
-	itd1000_write_reg(state, PLLNL, plln & 0xff);
-	itd1000_write_reg(state, PLLFH, (itd1000_read_reg(state, PLLFH) & 0xf0) | ((pllf >> 16) & 0x0f));
-	itd1000_write_reg(state, PLLFM, (pllf >> 8) & 0xff);
-	itd1000_write_reg(state, PLLFL, (pllf >> 0) & 0xff);
-
-	for (i = 0; i < ARRAY_SIZE(itd1000_fre_values); i++) {
-		if (freq_khz <= itd1000_fre_values[i].freq) {
-			itd_dbg("fre_values: %d\n", i);
-			itd1000_write_reg(state, RFTR, itd1000_fre_values[i].values[0]);
-			for (j = 0; j < 9; j++)
-				itd1000_write_reg(state, RFST1+j, itd1000_fre_values[i].values[j+1]);
-			break;
-		}
-	}
-
-	itd1000_set_vco(state, freq_khz);
-}
-
-static int itd1000_set_parameters(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct itd1000_state *state = fe->tuner_priv;
-	u8 pllcon1;
-
-	itd1000_set_lo(state, c->frequency);
-	itd1000_set_lpf_bw(state, c->symbol_rate);
-
-	pllcon1 = itd1000_read_reg(state, PLLCON1) & 0x7f;
-	itd1000_write_reg(state, PLLCON1, pllcon1 | (1 << 7));
-	itd1000_write_reg(state, PLLCON1, pllcon1);
-
-	return 0;
-}
-
-static int itd1000_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
-	struct itd1000_state *state = fe->tuner_priv;
-	*frequency = state->frequency;
-	return 0;
-}
-
-static int itd1000_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
-{
-	return 0;
-}
-
-static u8 itd1000_init_tab[][2] = {
-	{ PLLCON1,       0x65 }, /* Register does not change */
-	{ PLLNH,         0x80 }, /* Bits [7:6] do not change */
-	{ RESERVED_0X6D, 0x3b },
-	{ VCO_CHP2_I2C,  0x12 },
-	{ 0x72,          0xf9 }, /* No such regsister defined */
-	{ RESERVED_0X73, 0xff },
-	{ RESERVED_0X74, 0xb2 },
-	{ RESERVED_0X75, 0xc7 },
-	{ EXTGVBBRF,     0xf0 },
-	{ DIVAGCCK,      0x80 },
-	{ BBTR,          0xa0 },
-	{ RESERVED_0X7E, 0x4f },
-	{ 0x82,          0x88 }, /* No such regsister defined */
-	{ 0x83,          0x80 }, /* No such regsister defined */
-	{ 0x84,          0x80 }, /* No such regsister defined */
-	{ RESERVED_0X85, 0x74 },
-	{ RESERVED_0X86, 0xff },
-	{ RESERVED_0X88, 0x02 },
-	{ RESERVED_0X89, 0x16 },
-	{ RFST0,         0x1f },
-	{ RESERVED_0X94, 0x66 },
-	{ RESERVED_0X95, 0x66 },
-	{ RESERVED_0X96, 0x77 },
-	{ RESERVED_0X97, 0x99 },
-	{ RESERVED_0X98, 0xff },
-	{ RESERVED_0X99, 0xfc },
-	{ RESERVED_0X9A, 0xba },
-	{ RESERVED_0X9B, 0xaa },
-};
-
-static u8 itd1000_reinit_tab[][2] = {
-	{ VCO_CHP1_I2C, 0x8a },
-	{ BW,           0x87 },
-	{ GVBB_I2C,     0x03 },
-	{ BBGVMIN,      0x03 },
-	{ CON1,         0x2e },
-};
-
-
-static int itd1000_init(struct dvb_frontend *fe)
-{
-	struct itd1000_state *state = fe->tuner_priv;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(itd1000_init_tab); i++)
-		itd1000_write_reg(state, itd1000_init_tab[i][0], itd1000_init_tab[i][1]);
-
-	for (i = 0; i < ARRAY_SIZE(itd1000_reinit_tab); i++)
-		itd1000_write_reg(state, itd1000_reinit_tab[i][0], itd1000_reinit_tab[i][1]);
-
-	return 0;
-}
-
-static int itd1000_sleep(struct dvb_frontend *fe)
-{
-	return 0;
-}
-
-static int itd1000_release(struct dvb_frontend *fe)
-{
-	kfree(fe->tuner_priv);
-	fe->tuner_priv = NULL;
-	return 0;
-}
-
-static const struct dvb_tuner_ops itd1000_tuner_ops = {
-	.info = {
-		.name           = "Integrant ITD1000",
-		.frequency_min  = 950000,
-		.frequency_max  = 2150000,
-		.frequency_step = 125,     /* kHz for QPSK frontends */
-	},
-
-	.release       = itd1000_release,
-
-	.init          = itd1000_init,
-	.sleep         = itd1000_sleep,
-
-	.set_params    = itd1000_set_parameters,
-	.get_frequency = itd1000_get_frequency,
-	.get_bandwidth = itd1000_get_bandwidth
-};
-
-
-struct dvb_frontend *itd1000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct itd1000_config *cfg)
-{
-	struct itd1000_state *state = NULL;
-	u8 i = 0;
-
-	state = kzalloc(sizeof(struct itd1000_state), GFP_KERNEL);
-	if (state == NULL)
-		return NULL;
-
-	state->cfg = cfg;
-	state->i2c = i2c;
-
-	i = itd1000_read_reg(state, 0);
-	if (i != 0) {
-		kfree(state);
-		return NULL;
-	}
-	itd_info("successfully identified (ID: %d)\n", i);
-
-	memset(state->shadow, 0xff, sizeof(state->shadow));
-	for (i = 0x65; i < 0x9c; i++)
-		state->shadow[i] = itd1000_read_reg(state, i);
-
-	memcpy(&fe->ops.tuner_ops, &itd1000_tuner_ops, sizeof(struct dvb_tuner_ops));
-
-	fe->tuner_priv = state;
-
-	return fe;
-}
-EXPORT_SYMBOL(itd1000_attach);
-
-MODULE_AUTHOR("Patrick Boettcher <pb@linuxtv.org>");
-MODULE_DESCRIPTION("Integrant ITD1000 driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/itd1000.h b/drivers/media/dvb/frontends/itd1000.h
deleted file mode 100644
index 5e18df0..0000000
--- a/drivers/media/dvb/frontends/itd1000.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- *  Driver for the Integrant ITD1000 "Zero-IF Tuner IC for Direct Broadcast Satellite"
- *
- *  Copyright (c) 2007 Patrick Boettcher <pb@linuxtv.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
- */
-
-#ifndef ITD1000_H
-#define ITD1000_H
-
-struct dvb_frontend;
-struct i2c_adapter;
-
-struct itd1000_config {
-	u8 i2c_address;
-};
-
-#if defined(CONFIG_DVB_TUNER_ITD1000) || (defined(CONFIG_DVB_TUNER_ITD1000_MODULE) && defined(MODULE))
-extern struct dvb_frontend *itd1000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct itd1000_config *cfg);
-#else
-static inline struct dvb_frontend *itd1000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct itd1000_config *cfg)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif
diff --git a/drivers/media/dvb/frontends/itd1000_priv.h b/drivers/media/dvb/frontends/itd1000_priv.h
deleted file mode 100644
index 08ca851..0000000
--- a/drivers/media/dvb/frontends/itd1000_priv.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- *  Driver for the Integrant ITD1000 "Zero-IF Tuner IC for Direct Broadcast Satellite"
- *
- *  Copyright (c) 2007 Patrick Boettcher <pb@linuxtv.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
- */
-
-#ifndef ITD1000_PRIV_H
-#define ITD1000_PRIV_H
-
-struct itd1000_state {
-	struct itd1000_config *cfg;
-	struct i2c_adapter    *i2c;
-
-	u32 frequency; /* contains the value resulting from the LO-setting */
-
-	/* ugly workaround for flexcop's incapable i2c-controller
-	 * FIXME, if possible
-	 */
-	u8 shadow[256];
-};
-
-enum itd1000_register {
-	VCO_CHP1 = 0x65,
-	VCO_CHP2,
-	PLLCON1,
-	PLLNH,
-	PLLNL,
-	PLLFH,
-	PLLFM,
-	PLLFL,
-	RESERVED_0X6D,
-	PLLLOCK,
-	VCO_CHP2_I2C,
-	VCO_CHP1_I2C,
-	BW,
-	RESERVED_0X73 = 0x73,
-	RESERVED_0X74,
-	RESERVED_0X75,
-	GVBB,
-	GVRF,
-	GVBB_I2C,
-	EXTGVBBRF,
-	DIVAGCCK,
-	BBTR,
-	RFTR,
-	BBGVMIN,
-	RESERVED_0X7E,
-	RESERVED_0X85 = 0x85,
-	RESERVED_0X86,
-	CON1,
-	RESERVED_0X88,
-	RESERVED_0X89,
-	RFST0,
-	RFST1,
-	RFST2,
-	RFST3,
-	RFST4,
-	RFST5,
-	RFST6,
-	RFST7,
-	RFST8,
-	RFST9,
-	RESERVED_0X94,
-	RESERVED_0X95,
-	RESERVED_0X96,
-	RESERVED_0X97,
-	RESERVED_0X98,
-	RESERVED_0X99,
-	RESERVED_0X9A,
-	RESERVED_0X9B,
-};
-
-#endif
diff --git a/drivers/media/dvb/frontends/ix2505v.c b/drivers/media/dvb/frontends/ix2505v.c
deleted file mode 100644
index bc5a820..0000000
--- a/drivers/media/dvb/frontends/ix2505v.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/**
- * Driver for Sharp IX2505V (marked B0017) DVB-S silicon tuner
- *
- * Copyright (C) 2010 Malcolm Priestley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License Version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/module.h>
-#include <linux/dvb/frontend.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-
-#include "ix2505v.h"
-
-static int ix2505v_debug;
-#define dprintk(level, args...) do { \
-	if (ix2505v_debug & level) \
-		printk(KERN_DEBUG "ix2505v: " args); \
-} while (0)
-
-#define deb_info(args...)  dprintk(0x01, args)
-#define deb_i2c(args...)  dprintk(0x02, args)
-
-struct ix2505v_state {
-	struct i2c_adapter *i2c;
-	const struct ix2505v_config *config;
-	u32 frequency;
-};
-
-/**
- *  Data read format of the Sharp IX2505V B0017
- *
- *  byte1:   1   |   1   |   0   |   0   |   0   |  MA1  |  MA0  |  1
- *  byte2:  POR  |   FL  |  RD2  |  RD1  |  RD0  |   X   |   X   |  X
- *
- *  byte1 = address
- *  byte2;
- *	POR = Power on Reset (VCC H=<2.2v L=>2.2v)
- *	FL  = Phase Lock (H=lock L=unlock)
- *	RD0-2 = Reserved internal operations
- *
- * Only POR can be used to check the tuner is present
- *
- * Caution: after byte2 the I2C reverts to write mode continuing to read
- *          may corrupt tuning data.
- *
- */
-
-static int ix2505v_read_status_reg(struct ix2505v_state *state)
-{
-	u8 addr = state->config->tuner_address;
-	u8 b2[] = {0};
-	int ret;
-
-	struct i2c_msg msg[1] = {
-		{ .addr = addr, .flags = I2C_M_RD, .buf = b2, .len = 1 }
-	};
-
-	ret = i2c_transfer(state->i2c, msg, 1);
-	deb_i2c("Read %s ", __func__);
-
-	return (ret == 1) ? (int) b2[0] : -1;
-}
-
-static int ix2505v_write(struct ix2505v_state *state, u8 buf[], u8 count)
-{
-	struct i2c_msg msg[1] = {
-		{ .addr = state->config->tuner_address, .flags = 0,
-		  .buf = buf, .len = count },
-	};
-
-	int ret;
-
-	ret = i2c_transfer(state->i2c, msg, 1);
-
-	if (ret != 1) {
-		deb_i2c("%s: i2c error, ret=%d\n", __func__, ret);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static int ix2505v_release(struct dvb_frontend *fe)
-{
-	struct ix2505v_state *state = fe->tuner_priv;
-
-	fe->tuner_priv = NULL;
-	kfree(state);
-
-	return 0;
-}
-
-/**
- *  Data write format of the Sharp IX2505V B0017
- *
- *  byte1:   1   |   1   |   0   |   0   |   0   | 0(MA1)| 0(MA0)|  0
- *  byte2:   0   |  BG1  |  BG2  |   N8  |   N7  |   N6  |  N5   |  N4
- *  byte3:   N3  |   N2  |   N1  |   A5  |   A4  |   A3  |   A2  |  A1
- *  byte4:   1   | 1(C1) | 1(C0) |  PD5  |  PD4  |   TM  | 0(RTS)| 1(REF)
- *  byte5:   BA2 |   BA1 |  BA0  |  PSC  |  PD3  |PD2/TS2|DIV/TS1|PD0/TS0
- *
- *  byte1 = address
- *
- *  Write order
- *  1) byte1 -> byte2 -> byte3 -> byte4 -> byte5
- *  2) byte1 -> byte4 -> byte5 -> byte2 -> byte3
- *  3) byte1 -> byte2 -> byte3 -> byte4
- *  4) byte1 -> byte4 -> byte5 -> byte2
- *  5) byte1 -> byte2 -> byte3
- *  6) byte1 -> byte4 -> byte5
- *  7) byte1 -> byte2
- *  8) byte1 -> byte4
- *
- *  Recommended Setup
- *  1 -> 8 -> 6
- */
-
-static int ix2505v_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct ix2505v_state *state = fe->tuner_priv;
-	u32 frequency = c->frequency;
-	u32 b_w  = (c->symbol_rate * 27) / 32000;
-	u32 div_factor, N , A, x;
-	int ret = 0, len;
-	u8 gain, cc, ref, psc, local_osc, lpf;
-	u8 data[4] = {0};
-
-	if ((frequency < fe->ops.info.frequency_min)
-	||  (frequency > fe->ops.info.frequency_max))
-		return -EINVAL;
-
-	if (state->config->tuner_gain)
-		gain = (state->config->tuner_gain < 4)
-			? state->config->tuner_gain : 0;
-	else
-		gain = 0x0;
-
-	if (state->config->tuner_chargepump)
-		cc = state->config->tuner_chargepump;
-	else
-		cc = 0x3;
-
-	ref = 8; /* REF =1 */
-	psc = 32; /* PSC = 0 */
-
-	div_factor = (frequency * ref) / 40; /* local osc = 4Mhz */
-	x = div_factor / psc;
-	N = x/100;
-	A = ((x - (N * 100)) * psc) / 100;
-
-	data[0] = ((gain & 0x3) << 5) | (N >> 3);
-	data[1] = (N << 5) | (A & 0x1f);
-	data[2] = 0x81 | ((cc & 0x3) << 5) ; /*PD5,PD4 & TM = 0|C1,C0|REF=1*/
-
-	deb_info("Frq=%d x=%d N=%d A=%d\n", frequency, x, N, A);
-
-	if (frequency <= 1065000)
-		local_osc = (6 << 5) | 2;
-	else if (frequency <= 1170000)
-		local_osc = (7 << 5) | 2;
-	else if (frequency <= 1300000)
-		local_osc = (1 << 5);
-	else if (frequency <= 1445000)
-		local_osc = (2 << 5);
-	else if (frequency <= 1607000)
-		local_osc = (3 << 5);
-	else if (frequency <= 1778000)
-		local_osc = (4 << 5);
-	else if (frequency <= 1942000)
-		local_osc = (5 << 5);
-	else		/*frequency up to 2150000*/
-		local_osc = (6 << 5);
-
-	data[3] = local_osc; /* all other bits set 0 */
-
-	if (b_w <= 10000)
-		lpf = 0xc;
-	else if (b_w <= 12000)
-		lpf = 0x2;
-	else if (b_w <= 14000)
-		lpf = 0xa;
-	else if (b_w <= 16000)
-		lpf = 0x6;
-	else if (b_w <= 18000)
-		lpf = 0xe;
-	else if (b_w <= 20000)
-		lpf = 0x1;
-	else if (b_w <= 22000)
-		lpf = 0x9;
-	else if (b_w <= 24000)
-		lpf = 0x5;
-	else if (b_w <= 26000)
-		lpf = 0xd;
-	else if (b_w <= 28000)
-		lpf = 0x3;
-		else
-		lpf = 0xb;
-
-	deb_info("Osc=%x b_w=%x lpf=%x\n", local_osc, b_w, lpf);
-	deb_info("Data 0=[%x%x%x%x]\n", data[0], data[1], data[2], data[3]);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	len = sizeof(data);
-	ret |= ix2505v_write(state, data, len);
-
-	data[2] |= 0x4; /* set TM = 1 other bits same */
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	len = 1;
-	ret |= ix2505v_write(state, &data[2], len); /* write byte 4 only */
-
-	msleep(10);
-
-	data[2] |= ((lpf >> 2) & 0x3) << 3; /* lpf */
-	data[3] |= (lpf & 0x3) << 2;
-
-	deb_info("Data 2=[%x%x]\n", data[2], data[3]);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	len = 2;
-	ret |= ix2505v_write(state, &data[2], len); /* write byte 4 & 5 */
-
-	if (state->config->min_delay_ms)
-		msleep(state->config->min_delay_ms);
-
-	state->frequency = frequency;
-
-	return ret;
-}
-
-static int ix2505v_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
-	struct ix2505v_state *state = fe->tuner_priv;
-
-	*frequency = state->frequency;
-
-	return 0;
-}
-
-static struct dvb_tuner_ops ix2505v_tuner_ops = {
-	.info = {
-		.name = "Sharp IX2505V (B0017)",
-		.frequency_min = 950000,
-		.frequency_max = 2175000
-	},
-	.release = ix2505v_release,
-	.set_params = ix2505v_set_params,
-	.get_frequency = ix2505v_get_frequency,
-};
-
-struct dvb_frontend *ix2505v_attach(struct dvb_frontend *fe,
-				    const struct ix2505v_config *config,
-				    struct i2c_adapter *i2c)
-{
-	struct ix2505v_state *state = NULL;
-	int ret;
-
-	if (NULL == config) {
-		deb_i2c("%s: no config ", __func__);
-		goto error;
-	}
-
-	state = kzalloc(sizeof(struct ix2505v_state), GFP_KERNEL);
-	if (NULL == state)
-		return NULL;
-
-	state->config = config;
-	state->i2c = i2c;
-
-	if (state->config->tuner_write_only) {
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 1);
-
-		ret = ix2505v_read_status_reg(state);
-
-		if (ret & 0x80) {
-			deb_i2c("%s: No IX2505V found\n", __func__);
-			goto error;
-		}
-
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	fe->tuner_priv = state;
-
-	memcpy(&fe->ops.tuner_ops, &ix2505v_tuner_ops,
-		sizeof(struct dvb_tuner_ops));
-	deb_i2c("%s: initialization (%s addr=0x%02x) ok\n",
-		__func__, fe->ops.tuner_ops.info.name, config->tuner_address);
-
-	return fe;
-
-error:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(ix2505v_attach);
-
-module_param_named(debug, ix2505v_debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-MODULE_DESCRIPTION("DVB IX2505V tuner driver");
-MODULE_AUTHOR("Malcolm Priestley");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/ix2505v.h b/drivers/media/dvb/frontends/ix2505v.h
deleted file mode 100644
index 67e89d6..0000000
--- a/drivers/media/dvb/frontends/ix2505v.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/**
- * Driver for Sharp IX2505V (marked B0017) DVB-S silicon tuner
- *
- * Copyright (C) 2010 Malcolm Priestley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License Version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef DVB_IX2505V_H
-#define DVB_IX2505V_H
-
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-
-/**
- * Attach a ix2505v tuner to the supplied frontend structure.
- *
- * @param fe Frontend to attach to.
- * @param config ix2505v_config structure
- * @return FE pointer on success, NULL on failure.
- */
-
-struct ix2505v_config {
-	u8 tuner_address;
-
-	/*Baseband AMP gain control 0/1=0dB(default) 2=-2bB 3=-4dB */
-	u8 tuner_gain;
-
-	/*Charge pump output +/- 0=120 1=260 2=555 3=1200(default) */
-	u8 tuner_chargepump;
-
-	/* delay after tune */
-	int min_delay_ms;
-
-	/* disables reads*/
-	u8 tuner_write_only;
-
-};
-
-#if defined(CONFIG_DVB_IX2505V) || \
-	(defined(CONFIG_DVB_IX2505V_MODULE) && defined(MODULE))
-extern struct dvb_frontend *ix2505v_attach(struct dvb_frontend *fe,
-	const struct ix2505v_config *config, struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *ix2505v_attach(struct dvb_frontend *fe,
-	const struct ix2505v_config *config, struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif /* DVB_IX2505V_H */
diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb/frontends/l64781.c
deleted file mode 100644
index 36fcf55..0000000
--- a/drivers/media/dvb/frontends/l64781.c
+++ /dev/null
@@ -1,609 +0,0 @@
-/*
-    driver for LSI L64781 COFDM demodulator
-
-    Copyright (C) 2001 Holger Waechtler for Convergence Integrated Media GmbH
-		       Marko Kohtala <marko.kohtala@luukku.com>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include "dvb_frontend.h"
-#include "l64781.h"
-
-
-struct l64781_state {
-	struct i2c_adapter* i2c;
-	const struct l64781_config* config;
-	struct dvb_frontend frontend;
-
-	/* private demodulator data */
-	unsigned int first:1;
-};
-
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "l64781: " args); \
-	} while (0)
-
-static int debug;
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-
-static int l64781_writereg (struct l64781_state* state, u8 reg, u8 data)
-{
-	int ret;
-	u8 buf [] = { reg, data };
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
-
-	if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1)
-		dprintk ("%s: write_reg error (reg == %02x) = %02x!\n",
-			 __func__, reg, ret);
-
-	return (ret != 1) ? -1 : 0;
-}
-
-static int l64781_readreg (struct l64781_state* state, u8 reg)
-{
-	int ret;
-	u8 b0 [] = { reg };
-	u8 b1 [] = { 0 };
-	struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
-			   { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2) return ret;
-
-	return b1[0];
-}
-
-static void apply_tps (struct l64781_state* state)
-{
-	l64781_writereg (state, 0x2a, 0x00);
-	l64781_writereg (state, 0x2a, 0x01);
-
-	/* This here is a little bit questionable because it enables
-	   the automatic update of TPS registers. I think we'd need to
-	   handle the IRQ from FE to update some other registers as
-	   well, or at least implement some magic to tuning to correct
-	   to the TPS received from transmission. */
-	l64781_writereg (state, 0x2a, 0x02);
-}
-
-
-static void reset_afc (struct l64781_state* state)
-{
-	/* Set AFC stall for the AFC_INIT_FRQ setting, TIM_STALL for
-	   timing offset */
-	l64781_writereg (state, 0x07, 0x9e); /* stall AFC */
-	l64781_writereg (state, 0x08, 0);    /* AFC INIT FREQ */
-	l64781_writereg (state, 0x09, 0);
-	l64781_writereg (state, 0x0a, 0);
-	l64781_writereg (state, 0x07, 0x8e);
-	l64781_writereg (state, 0x0e, 0);    /* AGC gain to zero in beginning */
-	l64781_writereg (state, 0x11, 0x80); /* stall TIM */
-	l64781_writereg (state, 0x10, 0);    /* TIM_OFFSET_LSB */
-	l64781_writereg (state, 0x12, 0);
-	l64781_writereg (state, 0x13, 0);
-	l64781_writereg (state, 0x11, 0x00);
-}
-
-static int reset_and_configure (struct l64781_state* state)
-{
-	u8 buf [] = { 0x06 };
-	struct i2c_msg msg = { .addr = 0x00, .flags = 0, .buf = buf, .len = 1 };
-	// NOTE: this is correct in writing to address 0x00
-
-	return (i2c_transfer(state->i2c, &msg, 1) == 1) ? 0 : -ENODEV;
-}
-
-static int apply_frontend_param(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct l64781_state* state = fe->demodulator_priv;
-	/* The coderates for FEC_NONE, FEC_4_5 and FEC_FEC_6_7 are arbitrary */
-	static const u8 fec_tab[] = { 7, 0, 1, 2, 9, 3, 10, 4 };
-	/* QPSK, QAM_16, QAM_64 */
-	static const u8 qam_tab [] = { 2, 4, 0, 6 };
-	static const u8 guard_tab [] = { 1, 2, 4, 8 };
-	/* The Grundig 29504-401.04 Tuner comes with 18.432MHz crystal. */
-	static const u32 ppm = 8000;
-	u32 ddfs_offset_fixed;
-/*	u32 ddfs_offset_variable = 0x6000-((1000000UL+ppm)/ */
-/*			bw_tab[p->bandWidth]<<10)/15625; */
-	u32 init_freq;
-	u32 spi_bias;
-	u8 val0x04;
-	u8 val0x05;
-	u8 val0x06;
-	int bw;
-
-	switch (p->bandwidth_hz) {
-	case 8000000:
-		bw = 8;
-		break;
-	case 7000000:
-		bw = 7;
-		break;
-	case 6000000:
-		bw = 6;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	if (p->inversion != INVERSION_ON &&
-	    p->inversion != INVERSION_OFF)
-		return -EINVAL;
-
-	if (p->code_rate_HP != FEC_1_2 && p->code_rate_HP != FEC_2_3 &&
-	    p->code_rate_HP != FEC_3_4 && p->code_rate_HP != FEC_5_6 &&
-	    p->code_rate_HP != FEC_7_8)
-		return -EINVAL;
-
-	if (p->hierarchy != HIERARCHY_NONE &&
-	    (p->code_rate_LP != FEC_1_2 && p->code_rate_LP != FEC_2_3 &&
-	     p->code_rate_LP != FEC_3_4 && p->code_rate_LP != FEC_5_6 &&
-	     p->code_rate_LP != FEC_7_8))
-		return -EINVAL;
-
-	if (p->modulation != QPSK && p->modulation != QAM_16 &&
-	    p->modulation != QAM_64)
-		return -EINVAL;
-
-	if (p->transmission_mode != TRANSMISSION_MODE_2K &&
-	    p->transmission_mode != TRANSMISSION_MODE_8K)
-		return -EINVAL;
-
-	if (p->guard_interval < GUARD_INTERVAL_1_32 ||
-	    p->guard_interval > GUARD_INTERVAL_1_4)
-		return -EINVAL;
-
-	if (p->hierarchy < HIERARCHY_NONE ||
-	    p->hierarchy > HIERARCHY_4)
-		return -EINVAL;
-
-	ddfs_offset_fixed = 0x4000-(ppm<<16)/bw/1000000;
-
-	/* This works up to 20000 ppm, it overflows if too large ppm! */
-	init_freq = (((8UL<<25) + (8UL<<19) / 25*ppm / (15625/25)) /
-			bw & 0xFFFFFF);
-
-	/* SPI bias calculation is slightly modified to fit in 32bit */
-	/* will work for high ppm only... */
-	spi_bias = 378 * (1 << 10);
-	spi_bias *= 16;
-	spi_bias *= bw;
-	spi_bias *= qam_tab[p->modulation];
-	spi_bias /= p->code_rate_HP + 1;
-	spi_bias /= (guard_tab[p->guard_interval] + 32);
-	spi_bias *= 1000;
-	spi_bias /= 1000 + ppm/1000;
-	spi_bias *= p->code_rate_HP;
-
-	val0x04 = (p->transmission_mode << 2) | p->guard_interval;
-	val0x05 = fec_tab[p->code_rate_HP];
-
-	if (p->hierarchy != HIERARCHY_NONE)
-		val0x05 |= (p->code_rate_LP - FEC_1_2) << 3;
-
-	val0x06 = (p->hierarchy << 2) | p->modulation;
-
-	l64781_writereg (state, 0x04, val0x04);
-	l64781_writereg (state, 0x05, val0x05);
-	l64781_writereg (state, 0x06, val0x06);
-
-	reset_afc (state);
-
-	/* Technical manual section 2.6.1, TIM_IIR_GAIN optimal values */
-	l64781_writereg (state, 0x15,
-			 p->transmission_mode == TRANSMISSION_MODE_2K ? 1 : 3);
-	l64781_writereg (state, 0x16, init_freq & 0xff);
-	l64781_writereg (state, 0x17, (init_freq >> 8) & 0xff);
-	l64781_writereg (state, 0x18, (init_freq >> 16) & 0xff);
-
-	l64781_writereg (state, 0x1b, spi_bias & 0xff);
-	l64781_writereg (state, 0x1c, (spi_bias >> 8) & 0xff);
-	l64781_writereg (state, 0x1d, ((spi_bias >> 16) & 0x7f) |
-		(p->inversion == INVERSION_ON ? 0x80 : 0x00));
-
-	l64781_writereg (state, 0x22, ddfs_offset_fixed & 0xff);
-	l64781_writereg (state, 0x23, (ddfs_offset_fixed >> 8) & 0x3f);
-
-	l64781_readreg (state, 0x00);  /*  clear interrupt registers... */
-	l64781_readreg (state, 0x01);  /*  dto. */
-
-	apply_tps (state);
-
-	return 0;
-}
-
-static int get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct l64781_state* state = fe->demodulator_priv;
-	int tmp;
-
-
-	tmp = l64781_readreg(state, 0x04);
-	switch(tmp & 3) {
-	case 0:
-		p->guard_interval = GUARD_INTERVAL_1_32;
-		break;
-	case 1:
-		p->guard_interval = GUARD_INTERVAL_1_16;
-		break;
-	case 2:
-		p->guard_interval = GUARD_INTERVAL_1_8;
-		break;
-	case 3:
-		p->guard_interval = GUARD_INTERVAL_1_4;
-		break;
-	}
-	switch((tmp >> 2) & 3) {
-	case 0:
-		p->transmission_mode = TRANSMISSION_MODE_2K;
-		break;
-	case 1:
-		p->transmission_mode = TRANSMISSION_MODE_8K;
-		break;
-	default:
-		printk(KERN_WARNING "Unexpected value for transmission_mode\n");
-	}
-
-	tmp = l64781_readreg(state, 0x05);
-	switch(tmp & 7) {
-	case 0:
-		p->code_rate_HP = FEC_1_2;
-		break;
-	case 1:
-		p->code_rate_HP = FEC_2_3;
-		break;
-	case 2:
-		p->code_rate_HP = FEC_3_4;
-		break;
-	case 3:
-		p->code_rate_HP = FEC_5_6;
-		break;
-	case 4:
-		p->code_rate_HP = FEC_7_8;
-		break;
-	default:
-		printk("Unexpected value for code_rate_HP\n");
-	}
-	switch((tmp >> 3) & 7) {
-	case 0:
-		p->code_rate_LP = FEC_1_2;
-		break;
-	case 1:
-		p->code_rate_LP = FEC_2_3;
-		break;
-	case 2:
-		p->code_rate_LP = FEC_3_4;
-		break;
-	case 3:
-		p->code_rate_LP = FEC_5_6;
-		break;
-	case 4:
-		p->code_rate_LP = FEC_7_8;
-		break;
-	default:
-		printk("Unexpected value for code_rate_LP\n");
-	}
-
-	tmp = l64781_readreg(state, 0x06);
-	switch(tmp & 3) {
-	case 0:
-		p->modulation = QPSK;
-		break;
-	case 1:
-		p->modulation = QAM_16;
-		break;
-	case 2:
-		p->modulation = QAM_64;
-		break;
-	default:
-		printk(KERN_WARNING "Unexpected value for modulation\n");
-	}
-	switch((tmp >> 2) & 7) {
-	case 0:
-		p->hierarchy = HIERARCHY_NONE;
-		break;
-	case 1:
-		p->hierarchy = HIERARCHY_1;
-		break;
-	case 2:
-		p->hierarchy = HIERARCHY_2;
-		break;
-	case 3:
-		p->hierarchy = HIERARCHY_4;
-		break;
-	default:
-		printk("Unexpected value for hierarchy\n");
-	}
-
-
-	tmp = l64781_readreg (state, 0x1d);
-	p->inversion = (tmp & 0x80) ? INVERSION_ON : INVERSION_OFF;
-
-	tmp = (int) (l64781_readreg (state, 0x08) |
-		     (l64781_readreg (state, 0x09) << 8) |
-		     (l64781_readreg (state, 0x0a) << 16));
-	p->frequency += tmp;
-
-	return 0;
-}
-
-static int l64781_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct l64781_state* state = fe->demodulator_priv;
-	int sync = l64781_readreg (state, 0x32);
-	int gain = l64781_readreg (state, 0x0e);
-
-	l64781_readreg (state, 0x00);  /*  clear interrupt registers... */
-	l64781_readreg (state, 0x01);  /*  dto. */
-
-	*status = 0;
-
-	if (gain > 5)
-		*status |= FE_HAS_SIGNAL;
-
-	if (sync & 0x02) /* VCXO locked, this criteria should be ok */
-		*status |= FE_HAS_CARRIER;
-
-	if (sync & 0x20)
-		*status |= FE_HAS_VITERBI;
-
-	if (sync & 0x40)
-		*status |= FE_HAS_SYNC;
-
-	if (sync == 0x7f)
-		*status |= FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int l64781_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct l64781_state* state = fe->demodulator_priv;
-
-	/*   XXX FIXME: set up counting period (reg 0x26...0x28)
-	 */
-	*ber = l64781_readreg (state, 0x39)
-	    | (l64781_readreg (state, 0x3a) << 8);
-
-	return 0;
-}
-
-static int l64781_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength)
-{
-	struct l64781_state* state = fe->demodulator_priv;
-
-	u8 gain = l64781_readreg (state, 0x0e);
-	*signal_strength = (gain << 8) | gain;
-
-	return 0;
-}
-
-static int l64781_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct l64781_state* state = fe->demodulator_priv;
-
-	u8 avg_quality = 0xff - l64781_readreg (state, 0x33);
-	*snr = (avg_quality << 8) | avg_quality; /* not exact, but...*/
-
-	return 0;
-}
-
-static int l64781_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct l64781_state* state = fe->demodulator_priv;
-
-	*ucblocks = l64781_readreg (state, 0x37)
-	   | (l64781_readreg (state, 0x38) << 8);
-
-	return 0;
-}
-
-static int l64781_sleep(struct dvb_frontend* fe)
-{
-	struct l64781_state* state = fe->demodulator_priv;
-
-	/* Power down */
-	return l64781_writereg (state, 0x3e, 0x5a);
-}
-
-static int l64781_init(struct dvb_frontend* fe)
-{
-	struct l64781_state* state = fe->demodulator_priv;
-
-	reset_and_configure (state);
-
-	/* Power up */
-	l64781_writereg (state, 0x3e, 0xa5);
-
-	/* Reset hard */
-	l64781_writereg (state, 0x2a, 0x04);
-	l64781_writereg (state, 0x2a, 0x00);
-
-	/* Set tuner specific things */
-	/* AFC_POL, set also in reset_afc */
-	l64781_writereg (state, 0x07, 0x8e);
-
-	/* Use internal ADC */
-	l64781_writereg (state, 0x0b, 0x81);
-
-	/* AGC loop gain, and polarity is positive */
-	l64781_writereg (state, 0x0c, 0x84);
-
-	/* Internal ADC outputs two's complement */
-	l64781_writereg (state, 0x0d, 0x8c);
-
-	/* With ppm=8000, it seems the DTR_SENSITIVITY will result in
-	   value of 2 with all possible bandwidths and guard
-	   intervals, which is the initial value anyway. */
-	/*l64781_writereg (state, 0x19, 0x92);*/
-
-	/* Everything is two's complement, soft bit and CSI_OUT too */
-	l64781_writereg (state, 0x1e, 0x09);
-
-	/* delay a bit after first init attempt */
-	if (state->first) {
-		state->first = 0;
-		msleep(200);
-	}
-
-	return 0;
-}
-
-static int l64781_get_tune_settings(struct dvb_frontend* fe,
-				    struct dvb_frontend_tune_settings* fesettings)
-{
-	fesettings->min_delay_ms = 4000;
-	fesettings->step_size = 0;
-	fesettings->max_drift = 0;
-	return 0;
-}
-
-static void l64781_release(struct dvb_frontend* fe)
-{
-	struct l64781_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops l64781_ops;
-
-struct dvb_frontend* l64781_attach(const struct l64781_config* config,
-				   struct i2c_adapter* i2c)
-{
-	struct l64781_state* state = NULL;
-	int reg0x3e = -1;
-	u8 b0 [] = { 0x1a };
-	u8 b1 [] = { 0x00 };
-	struct i2c_msg msg [] = { { .addr = config->demod_address, .flags = 0, .buf = b0, .len = 1 },
-			   { .addr = config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct l64781_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->first = 1;
-
-	/**
-	 *  the L64781 won't show up before we send the reset_and_configure()
-	 *  broadcast. If nothing responds there is no L64781 on the bus...
-	 */
-	if (reset_and_configure(state) < 0) {
-		dprintk("No response to reset and configure broadcast...\n");
-		goto error;
-	}
-
-	/* The chip always responds to reads */
-	if (i2c_transfer(state->i2c, msg, 2) != 2) {
-		dprintk("No response to read on I2C bus\n");
-		goto error;
-	}
-
-	/* Save current register contents for bailout */
-	reg0x3e = l64781_readreg(state, 0x3e);
-
-	/* Reading the POWER_DOWN register always returns 0 */
-	if (reg0x3e != 0) {
-		dprintk("Device doesn't look like L64781\n");
-		goto error;
-	}
-
-	/* Turn the chip off */
-	l64781_writereg (state, 0x3e, 0x5a);
-
-	/* Responds to all reads with 0 */
-	if (l64781_readreg(state, 0x1a) != 0) {
-		dprintk("Read 1 returned unexpcted value\n");
-		goto error;
-	}
-
-	/* Turn the chip on */
-	l64781_writereg (state, 0x3e, 0xa5);
-
-	/* Responds with register default value */
-	if (l64781_readreg(state, 0x1a) != 0xa1) {
-		dprintk("Read 2 returned unexpcted value\n");
-		goto error;
-	}
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &l64781_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	if (reg0x3e >= 0)
-		l64781_writereg (state, 0x3e, reg0x3e);  /* restore reg 0x3e */
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops l64781_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name = "LSI L64781 DVB-T",
-	/*	.frequency_min = ???,*/
-	/*	.frequency_max = ???,*/
-		.frequency_stepsize = 166666,
-	/*      .frequency_tolerance = ???,*/
-	/*      .symbol_rate_tolerance = ???,*/
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-		      FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
-		      FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
-		      FE_CAN_MUTE_TS
-	},
-
-	.release = l64781_release,
-
-	.init = l64781_init,
-	.sleep = l64781_sleep,
-
-	.set_frontend = apply_frontend_param,
-	.get_frontend = get_frontend,
-	.get_tune_settings = l64781_get_tune_settings,
-
-	.read_status = l64781_read_status,
-	.read_ber = l64781_read_ber,
-	.read_signal_strength = l64781_read_signal_strength,
-	.read_snr = l64781_read_snr,
-	.read_ucblocks = l64781_read_ucblocks,
-};
-
-MODULE_DESCRIPTION("LSI L64781 DVB-T Demodulator driver");
-MODULE_AUTHOR("Holger Waechtler, Marko Kohtala");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(l64781_attach);
diff --git a/drivers/media/dvb/frontends/l64781.h b/drivers/media/dvb/frontends/l64781.h
deleted file mode 100644
index 1305a9e..0000000
--- a/drivers/media/dvb/frontends/l64781.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
-    driver for LSI L64781 COFDM demodulator
-
-    Copyright (C) 2001 Holger Waechtler for Convergence Integrated Media GmbH
-		       Marko Kohtala <marko.kohtala@luukku.com>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef L64781_H
-#define L64781_H
-
-#include <linux/dvb/frontend.h>
-
-struct l64781_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-};
-
-#if defined(CONFIG_DVB_L64781) || (defined(CONFIG_DVB_L64781_MODULE) && defined(MODULE))
-extern struct dvb_frontend* l64781_attach(const struct l64781_config* config,
-					  struct i2c_adapter* i2c);
-#else
-static inline struct dvb_frontend* l64781_attach(const struct l64781_config* config,
-					  struct i2c_adapter* i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_L64781
-
-#endif // L64781_H
diff --git a/drivers/media/dvb/frontends/lg2160.c b/drivers/media/dvb/frontends/lg2160.c
deleted file mode 100644
index cc11260..0000000
--- a/drivers/media/dvb/frontends/lg2160.c
+++ /dev/null
@@ -1,1468 +0,0 @@
-/*
- *    Support for LG2160 - ATSC/MH
- *
- *    Copyright (C) 2010 Michael Krufky <mkrufky@linuxtv.org>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/jiffies.h>
-#include <linux/dvb/frontend.h>
-#include "lg2160.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debug level (info=1, reg=2 (or-able))");
-
-#define DBG_INFO 1
-#define DBG_REG  2
-
-#define lg_printk(kern, fmt, arg...)					\
-	printk(kern "%s: " fmt, __func__, ##arg)
-
-#define lg_info(fmt, arg...)	printk(KERN_INFO "lg2160: " fmt, ##arg)
-#define lg_warn(fmt, arg...)	lg_printk(KERN_WARNING,       fmt, ##arg)
-#define lg_err(fmt, arg...)	lg_printk(KERN_ERR,           fmt, ##arg)
-#define lg_dbg(fmt, arg...) if (debug & DBG_INFO)			\
-				lg_printk(KERN_DEBUG,         fmt, ##arg)
-#define lg_reg(fmt, arg...) if (debug & DBG_REG)			\
-				lg_printk(KERN_DEBUG,         fmt, ##arg)
-
-#define lg_fail(ret)							\
-({									\
-	int __ret;							\
-	__ret = (ret < 0);						\
-	if (__ret)							\
-		lg_err("error %d on line %d\n",	ret, __LINE__);		\
-	__ret;								\
-})
-
-struct lg216x_state {
-	struct i2c_adapter *i2c_adap;
-	const struct lg2160_config *cfg;
-
-	struct dvb_frontend frontend;
-
-	u32 current_frequency;
-	u8 parade_id;
-	u8 fic_ver;
-	unsigned int last_reset;
-};
-
-/* ------------------------------------------------------------------------ */
-
-static int lg216x_write_reg(struct lg216x_state *state, u16 reg, u8 val)
-{
-	int ret;
-	u8 buf[] = { reg >> 8, reg & 0xff, val };
-	struct i2c_msg msg = {
-		.addr = state->cfg->i2c_addr, .flags = 0,
-		.buf = buf, .len = 3,
-	};
-
-	lg_reg("reg: 0x%04x, val: 0x%02x\n", reg, val);
-
-	ret = i2c_transfer(state->i2c_adap, &msg, 1);
-
-	if (ret != 1) {
-		lg_err("error (addr %02x %02x <- %02x, err = %i)\n",
-		       msg.buf[0], msg.buf[1], msg.buf[2], ret);
-		if (ret < 0)
-			return ret;
-		else
-			return -EREMOTEIO;
-	}
-	return 0;
-}
-
-static int lg216x_read_reg(struct lg216x_state *state, u16 reg, u8 *val)
-{
-	int ret;
-	u8 reg_buf[] = { reg >> 8, reg & 0xff };
-	struct i2c_msg msg[] = {
-		{ .addr = state->cfg->i2c_addr,
-		  .flags = 0, .buf = reg_buf, .len = 2 },
-		{ .addr = state->cfg->i2c_addr,
-		  .flags = I2C_M_RD, .buf = val, .len = 1 },
-	};
-
-	lg_reg("reg: 0x%04x\n", reg);
-
-	ret = i2c_transfer(state->i2c_adap, msg, 2);
-
-	if (ret != 2) {
-		lg_err("error (addr %02x reg %04x error (ret == %i)\n",
-		       state->cfg->i2c_addr, reg, ret);
-		if (ret < 0)
-			return ret;
-		else
-			return -EREMOTEIO;
-	}
-	return 0;
-}
-
-struct lg216x_reg {
-	u16 reg;
-	u8 val;
-};
-
-static int lg216x_write_regs(struct lg216x_state *state,
-			     struct lg216x_reg *regs, int len)
-{
-	int i, ret;
-
-	lg_reg("writing %d registers...\n", len);
-
-	for (i = 0; i < len; i++) {
-		ret = lg216x_write_reg(state, regs[i].reg, regs[i].val);
-		if (lg_fail(ret))
-			return ret;
-	}
-	return 0;
-}
-
-static int lg216x_set_reg_bit(struct lg216x_state *state,
-			      u16 reg, int bit, int onoff)
-{
-	u8 val;
-	int ret;
-
-	lg_reg("reg: 0x%04x, bit: %d, level: %d\n", reg, bit, onoff);
-
-	ret = lg216x_read_reg(state, reg, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	val &= ~(1 << bit);
-	val |= (onoff & 1) << bit;
-
-	ret = lg216x_write_reg(state, reg, val);
-	lg_fail(ret);
-fail:
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int lg216x_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct lg216x_state *state = fe->demodulator_priv;
-	int ret;
-
-	if (state->cfg->deny_i2c_rptr)
-		return 0;
-
-	lg_dbg("(%d)\n", enable);
-
-	ret = lg216x_set_reg_bit(state, 0x0000, 0, enable ? 0 : 1);
-
-	msleep(1);
-
-	return ret;
-}
-
-static int lg216x_soft_reset(struct lg216x_state *state)
-{
-	int ret;
-
-	lg_dbg("\n");
-
-	ret = lg216x_write_reg(state, 0x0002, 0x00);
-	if (lg_fail(ret))
-		goto fail;
-
-	msleep(20);
-	ret = lg216x_write_reg(state, 0x0002, 0x01);
-	if (lg_fail(ret))
-		goto fail;
-
-	state->last_reset = jiffies_to_msecs(jiffies);
-fail:
-	return ret;
-}
-
-static int lg216x_initialize(struct lg216x_state *state)
-{
-	int ret;
-
-	static struct lg216x_reg lg2160_init[] = {
-#if 0
-		{ .reg = 0x0015, .val = 0xe6 },
-#else
-		{ .reg = 0x0015, .val = 0xf7 },
-		{ .reg = 0x001b, .val = 0x52 },
-		{ .reg = 0x0208, .val = 0x00 },
-		{ .reg = 0x0209, .val = 0x82 },
-		{ .reg = 0x0210, .val = 0xf9 },
-		{ .reg = 0x020a, .val = 0x00 },
-		{ .reg = 0x020b, .val = 0x82 },
-		{ .reg = 0x020d, .val = 0x28 },
-		{ .reg = 0x020f, .val = 0x14 },
-#endif
-	};
-
-	static struct lg216x_reg lg2161_init[] = {
-		{ .reg = 0x0000, .val = 0x41 },
-		{ .reg = 0x0001, .val = 0xfb },
-		{ .reg = 0x0216, .val = 0x00 },
-		{ .reg = 0x0219, .val = 0x00 },
-		{ .reg = 0x021b, .val = 0x55 },
-		{ .reg = 0x0606, .val = 0x0a },
-	};
-
-	switch (state->cfg->lg_chip) {
-	case LG2160:
-		ret = lg216x_write_regs(state,
-					lg2160_init, ARRAY_SIZE(lg2160_init));
-		break;
-	case LG2161:
-		ret = lg216x_write_regs(state,
-					lg2161_init, ARRAY_SIZE(lg2161_init));
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	if (lg_fail(ret))
-		goto fail;
-
-	ret = lg216x_soft_reset(state);
-	lg_fail(ret);
-fail:
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int lg216x_set_if(struct lg216x_state *state)
-{
-	u8 val;
-	int ret;
-
-	lg_dbg("%d KHz\n", state->cfg->if_khz);
-
-	ret = lg216x_read_reg(state, 0x0132, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	val &= 0xfb;
-	val |= (0 == state->cfg->if_khz) ? 0x04 : 0x00;
-
-	ret = lg216x_write_reg(state, 0x0132, val);
-	lg_fail(ret);
-
-	/* if NOT zero IF, 6 MHz is the default */
-fail:
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int lg2160_agc_fix(struct lg216x_state *state,
-			  int if_agc_fix, int rf_agc_fix)
-{
-	u8 val;
-	int ret;
-
-	ret = lg216x_read_reg(state, 0x0100, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	val &= 0xf3;
-	val |= (if_agc_fix) ? 0x08 : 0x00;
-	val |= (rf_agc_fix) ? 0x04 : 0x00;
-
-	ret = lg216x_write_reg(state, 0x0100, val);
-	lg_fail(ret);
-fail:
-	return ret;
-}
-
-#if 0
-static int lg2160_agc_freeze(struct lg216x_state *state,
-			     int if_agc_freeze, int rf_agc_freeze)
-{
-	u8 val;
-	int ret;
-
-	ret = lg216x_read_reg(state, 0x0100, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	val &= 0xcf;
-	val |= (if_agc_freeze) ? 0x20 : 0x00;
-	val |= (rf_agc_freeze) ? 0x10 : 0x00;
-
-	ret = lg216x_write_reg(state, 0x0100, val);
-	lg_fail(ret);
-fail:
-	return ret;
-}
-#endif
-
-static int lg2160_agc_polarity(struct lg216x_state *state,
-			       int if_agc_polarity, int rf_agc_polarity)
-{
-	u8 val;
-	int ret;
-
-	ret = lg216x_read_reg(state, 0x0100, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	val &= 0xfc;
-	val |= (if_agc_polarity) ? 0x02 : 0x00;
-	val |= (rf_agc_polarity) ? 0x01 : 0x00;
-
-	ret = lg216x_write_reg(state, 0x0100, val);
-	lg_fail(ret);
-fail:
-	return ret;
-}
-
-static int lg2160_tuner_pwr_save_polarity(struct lg216x_state *state,
-					  int polarity)
-{
-	u8 val;
-	int ret;
-
-	ret = lg216x_read_reg(state, 0x0008, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	val &= 0xfe;
-	val |= (polarity) ? 0x01 : 0x00;
-
-	ret = lg216x_write_reg(state, 0x0008, val);
-	lg_fail(ret);
-fail:
-	return ret;
-}
-
-static int lg2160_spectrum_polarity(struct lg216x_state *state,
-				    int inverted)
-{
-	u8 val;
-	int ret;
-
-	ret = lg216x_read_reg(state, 0x0132, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	val &= 0xfd;
-	val |= (inverted) ? 0x02 : 0x00;
-
-	ret = lg216x_write_reg(state, 0x0132, val);
-	lg_fail(ret);
-fail:
-	return lg216x_soft_reset(state);
-}
-
-static int lg2160_tuner_pwr_save(struct lg216x_state *state, int onoff)
-{
-	u8 val;
-	int ret;
-
-	ret = lg216x_read_reg(state, 0x0007, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	val &= 0xbf;
-	val |= (onoff) ? 0x40 : 0x00;
-
-	ret = lg216x_write_reg(state, 0x0007, val);
-	lg_fail(ret);
-fail:
-	return ret;
-}
-
-static int lg216x_set_parade(struct lg216x_state *state, int id)
-{
-	int ret;
-
-	ret = lg216x_write_reg(state, 0x013e, id & 0x7f);
-	if (lg_fail(ret))
-		goto fail;
-
-	state->parade_id = id & 0x7f;
-fail:
-	return ret;
-}
-
-static int lg216x_set_ensemble(struct lg216x_state *state, int id)
-{
-	int ret;
-	u16 reg;
-	u8 val;
-
-	switch (state->cfg->lg_chip) {
-	case LG2160:
-		reg = 0x0400;
-		break;
-	case LG2161:
-	default:
-		reg = 0x0500;
-		break;
-	}
-
-	ret = lg216x_read_reg(state, reg, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	val &= 0xfe;
-	val |= (id) ? 0x01 : 0x00;
-
-	ret = lg216x_write_reg(state, reg, val);
-	lg_fail(ret);
-fail:
-	return ret;
-}
-
-static int lg2160_set_spi_clock(struct lg216x_state *state)
-{
-	u8 val;
-	int ret;
-
-	ret = lg216x_read_reg(state, 0x0014, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	val &= 0xf3;
-	val |= (state->cfg->spi_clock << 2);
-
-	ret = lg216x_write_reg(state, 0x0014, val);
-	lg_fail(ret);
-fail:
-	return ret;
-}
-
-static int lg2161_set_output_interface(struct lg216x_state *state)
-{
-	u8 val;
-	int ret;
-
-	ret = lg216x_read_reg(state, 0x0014, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	val &= ~0x07;
-	val |= state->cfg->output_if; /* FIXME: needs sanity check */
-
-	ret = lg216x_write_reg(state, 0x0014, val);
-	lg_fail(ret);
-fail:
-	return ret;
-}
-
-static int lg216x_enable_fic(struct lg216x_state *state, int onoff)
-{
-	int ret;
-
-	ret = lg216x_write_reg(state, 0x0017, 0x23);
-	if (lg_fail(ret))
-		goto fail;
-
-	ret = lg216x_write_reg(state, 0x0016, 0xfc);
-	if (lg_fail(ret))
-		goto fail;
-
-	switch (state->cfg->lg_chip) {
-	case LG2160:
-		ret = lg216x_write_reg(state, 0x0016,
-				       0xfc | ((onoff) ? 0x02 : 0x00));
-		break;
-	case LG2161:
-		ret = lg216x_write_reg(state, 0x0016, (onoff) ? 0x10 : 0x00);
-		break;
-	}
-	if (lg_fail(ret))
-		goto fail;
-
-	ret = lg216x_initialize(state);
-	if (lg_fail(ret))
-		goto fail;
-
-	if (onoff) {
-		ret = lg216x_write_reg(state, 0x0017, 0x03);
-		lg_fail(ret);
-	}
-fail:
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int lg216x_get_fic_version(struct lg216x_state *state, u8 *ficver)
-{
-	u8 val;
-	int ret;
-
-	*ficver = 0xff; /* invalid value */
-
-	ret = lg216x_read_reg(state, 0x0128, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	*ficver = (val >> 3) & 0x1f;
-fail:
-	return ret;
-}
-
-#if 0
-static int lg2160_get_parade_id(struct lg216x_state *state, u8 *id)
-{
-	u8 val;
-	int ret;
-
-	*id = 0xff; /* invalid value */
-
-	ret = lg216x_read_reg(state, 0x0123, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	*id = val & 0x7f;
-fail:
-	return ret;
-}
-#endif
-
-static int lg216x_get_nog(struct lg216x_state *state, u8 *nog)
-{
-	u8 val;
-	int ret;
-
-	*nog = 0xff; /* invalid value */
-
-	ret = lg216x_read_reg(state, 0x0124, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	*nog = ((val >> 4) & 0x07) + 1;
-fail:
-	return ret;
-}
-
-static int lg216x_get_tnog(struct lg216x_state *state, u8 *tnog)
-{
-	u8 val;
-	int ret;
-
-	*tnog = 0xff; /* invalid value */
-
-	ret = lg216x_read_reg(state, 0x0125, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	*tnog = val & 0x1f;
-fail:
-	return ret;
-}
-
-static int lg216x_get_sgn(struct lg216x_state *state, u8 *sgn)
-{
-	u8 val;
-	int ret;
-
-	*sgn = 0xff; /* invalid value */
-
-	ret = lg216x_read_reg(state, 0x0124, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	*sgn = val & 0x0f;
-fail:
-	return ret;
-}
-
-static int lg216x_get_prc(struct lg216x_state *state, u8 *prc)
-{
-	u8 val;
-	int ret;
-
-	*prc = 0xff; /* invalid value */
-
-	ret = lg216x_read_reg(state, 0x0125, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	*prc = ((val >> 5) & 0x07) + 1;
-fail:
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int lg216x_get_rs_frame_mode(struct lg216x_state *state,
-				    enum atscmh_rs_frame_mode *rs_framemode)
-{
-	u8 val;
-	int ret;
-
-	switch (state->cfg->lg_chip) {
-	case LG2160:
-		ret = lg216x_read_reg(state, 0x0410, &val);
-		break;
-	case LG2161:
-		ret = lg216x_read_reg(state, 0x0513, &val);
-		break;
-	default:
-		ret = -EINVAL;
-	}
-	if (lg_fail(ret))
-		goto fail;
-
-	switch ((val >> 4) & 0x03) {
-#if 1
-	default:
-#endif
-	case 0x00:
-		*rs_framemode = ATSCMH_RSFRAME_PRI_ONLY;
-		break;
-	case 0x01:
-		*rs_framemode = ATSCMH_RSFRAME_PRI_SEC;
-		break;
-#if 0
-	default:
-		*rs_framemode = ATSCMH_RSFRAME_RES;
-		break;
-#endif
-	}
-fail:
-	return ret;
-}
-
-static
-int lg216x_get_rs_frame_ensemble(struct lg216x_state *state,
-				 enum atscmh_rs_frame_ensemble *rs_frame_ens)
-{
-	u8 val;
-	int ret;
-
-	switch (state->cfg->lg_chip) {
-	case LG2160:
-		ret = lg216x_read_reg(state, 0x0400, &val);
-		break;
-	case LG2161:
-		ret = lg216x_read_reg(state, 0x0500, &val);
-		break;
-	default:
-		ret = -EINVAL;
-	}
-	if (lg_fail(ret))
-		goto fail;
-
-	val &= 0x01;
-	*rs_frame_ens = (enum atscmh_rs_frame_ensemble) val;
-fail:
-	return ret;
-}
-
-static int lg216x_get_rs_code_mode(struct lg216x_state *state,
-				   enum atscmh_rs_code_mode *rs_code_pri,
-				   enum atscmh_rs_code_mode *rs_code_sec)
-{
-	u8 val;
-	int ret;
-
-	switch (state->cfg->lg_chip) {
-	case LG2160:
-		ret = lg216x_read_reg(state, 0x0410, &val);
-		break;
-	case LG2161:
-		ret = lg216x_read_reg(state, 0x0513, &val);
-		break;
-	default:
-		ret = -EINVAL;
-	}
-	if (lg_fail(ret))
-		goto fail;
-
-	*rs_code_pri = (enum atscmh_rs_code_mode) ((val >> 2) & 0x03);
-	*rs_code_sec = (enum atscmh_rs_code_mode) (val & 0x03);
-fail:
-	return ret;
-}
-
-static int lg216x_get_sccc_block_mode(struct lg216x_state *state,
-				      enum atscmh_sccc_block_mode *sccc_block)
-{
-	u8 val;
-	int ret;
-
-	switch (state->cfg->lg_chip) {
-	case LG2160:
-		ret = lg216x_read_reg(state, 0x0315, &val);
-		break;
-	case LG2161:
-		ret = lg216x_read_reg(state, 0x0511, &val);
-		break;
-	default:
-		ret = -EINVAL;
-	}
-	if (lg_fail(ret))
-		goto fail;
-
-	switch (val & 0x03) {
-	case 0x00:
-		*sccc_block = ATSCMH_SCCC_BLK_SEP;
-		break;
-	case 0x01:
-		*sccc_block = ATSCMH_SCCC_BLK_COMB;
-		break;
-	default:
-		*sccc_block = ATSCMH_SCCC_BLK_RES;
-		break;
-	}
-fail:
-	return ret;
-}
-
-static int lg216x_get_sccc_code_mode(struct lg216x_state *state,
-				     enum atscmh_sccc_code_mode *mode_a,
-				     enum atscmh_sccc_code_mode *mode_b,
-				     enum atscmh_sccc_code_mode *mode_c,
-				     enum atscmh_sccc_code_mode *mode_d)
-{
-	u8 val;
-	int ret;
-
-	switch (state->cfg->lg_chip) {
-	case LG2160:
-		ret = lg216x_read_reg(state, 0x0316, &val);
-		break;
-	case LG2161:
-		ret = lg216x_read_reg(state, 0x0512, &val);
-		break;
-	default:
-		ret = -EINVAL;
-	}
-	if (lg_fail(ret))
-		goto fail;
-
-	switch ((val >> 6) & 0x03) {
-	case 0x00:
-		*mode_a = ATSCMH_SCCC_CODE_HLF;
-		break;
-	case 0x01:
-		*mode_a = ATSCMH_SCCC_CODE_QTR;
-		break;
-	default:
-		*mode_a = ATSCMH_SCCC_CODE_RES;
-		break;
-	}
-
-	switch ((val >> 4) & 0x03) {
-	case 0x00:
-		*mode_b = ATSCMH_SCCC_CODE_HLF;
-		break;
-	case 0x01:
-		*mode_b = ATSCMH_SCCC_CODE_QTR;
-		break;
-	default:
-		*mode_b = ATSCMH_SCCC_CODE_RES;
-		break;
-	}
-
-	switch ((val >> 2) & 0x03) {
-	case 0x00:
-		*mode_c = ATSCMH_SCCC_CODE_HLF;
-		break;
-	case 0x01:
-		*mode_c = ATSCMH_SCCC_CODE_QTR;
-		break;
-	default:
-		*mode_c = ATSCMH_SCCC_CODE_RES;
-		break;
-	}
-
-	switch (val & 0x03) {
-	case 0x00:
-		*mode_d = ATSCMH_SCCC_CODE_HLF;
-		break;
-	case 0x01:
-		*mode_d = ATSCMH_SCCC_CODE_QTR;
-		break;
-	default:
-		*mode_d = ATSCMH_SCCC_CODE_RES;
-		break;
-	}
-fail:
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-
-#if 0
-static int lg216x_read_fic_err_count(struct lg216x_state *state, u8 *err)
-{
-	u8 fic_err;
-	int ret;
-
-	*err = 0;
-
-	switch (state->cfg->lg_chip) {
-	case LG2160:
-		ret = lg216x_read_reg(state, 0x0012, &fic_err);
-		break;
-	case LG2161:
-		ret = lg216x_read_reg(state, 0x001e, &fic_err);
-		break;
-	}
-	if (lg_fail(ret))
-		goto fail;
-
-	*err = fic_err;
-fail:
-	return ret;
-}
-
-static int lg2160_read_crc_err_count(struct lg216x_state *state, u16 *err)
-{
-	u8 crc_err1, crc_err2;
-	int ret;
-
-	*err = 0;
-
-	ret = lg216x_read_reg(state, 0x0411, &crc_err1);
-	if (lg_fail(ret))
-		goto fail;
-
-	ret = lg216x_read_reg(state, 0x0412, &crc_err2);
-	if (lg_fail(ret))
-		goto fail;
-
-	*err = (u16)(((crc_err2 & 0x0f) << 8) | crc_err1);
-fail:
-	return ret;
-}
-
-static int lg2161_read_crc_err_count(struct lg216x_state *state, u16 *err)
-{
-	u8 crc_err;
-	int ret;
-
-	*err = 0;
-
-	ret = lg216x_read_reg(state, 0x0612, &crc_err);
-	if (lg_fail(ret))
-		goto fail;
-
-	*err = (u16)crc_err;
-fail:
-	return ret;
-}
-
-static int lg216x_read_crc_err_count(struct lg216x_state *state, u16 *err)
-{
-	int ret;
-	switch (state->cfg->lg_chip) {
-	case LG2160:
-		ret = lg2160_read_crc_err_count(state, err);
-		break;
-	case LG2161:
-		ret = lg2161_read_crc_err_count(state, err);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	return ret;
-}
-
-static int lg2160_read_rs_err_count(struct lg216x_state *state, u16 *err)
-{
-	u8 rs_err1, rs_err2;
-	int ret;
-
-	*err = 0;
-
-	ret = lg216x_read_reg(state, 0x0413, &rs_err1);
-	if (lg_fail(ret))
-		goto fail;
-
-	ret = lg216x_read_reg(state, 0x0414, &rs_err2);
-	if (lg_fail(ret))
-		goto fail;
-
-	*err = (u16)(((rs_err2 & 0x0f) << 8) | rs_err1);
-fail:
-	return ret;
-}
-
-static int lg2161_read_rs_err_count(struct lg216x_state *state, u16 *err)
-{
-	u8 rs_err1, rs_err2;
-	int ret;
-
-	*err = 0;
-
-	ret = lg216x_read_reg(state, 0x0613, &rs_err1);
-	if (lg_fail(ret))
-		goto fail;
-
-	ret = lg216x_read_reg(state, 0x0614, &rs_err2);
-	if (lg_fail(ret))
-		goto fail;
-
-	*err = (u16)((rs_err1 << 8) | rs_err2);
-fail:
-	return ret;
-}
-
-static int lg216x_read_rs_err_count(struct lg216x_state *state, u16 *err)
-{
-	int ret;
-	switch (state->cfg->lg_chip) {
-	case LG2160:
-		ret = lg2160_read_rs_err_count(state, err);
-		break;
-	case LG2161:
-		ret = lg2161_read_rs_err_count(state, err);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	return ret;
-}
-#endif
-
-/* ------------------------------------------------------------------------ */
-
-static int lg216x_get_frontend(struct dvb_frontend *fe)
-{
-	struct lg216x_state *state = fe->demodulator_priv;
-	int ret;
-
-	lg_dbg("\n");
-
-	fe->dtv_property_cache.modulation = VSB_8;
-	fe->dtv_property_cache.frequency = state->current_frequency;
-	fe->dtv_property_cache.delivery_system = SYS_ATSCMH;
-
-	ret = lg216x_get_fic_version(state,
-				     &fe->dtv_property_cache.atscmh_fic_ver);
-	if (lg_fail(ret))
-		goto fail;
-	if (state->fic_ver != fe->dtv_property_cache.atscmh_fic_ver) {
-		state->fic_ver = fe->dtv_property_cache.atscmh_fic_ver;
-
-#if 0
-		ret = lg2160_get_parade_id(state,
-				&fe->dtv_property_cache.atscmh_parade_id);
-		if (lg_fail(ret))
-			goto fail;
-/* #else */
-		fe->dtv_property_cache.atscmh_parade_id = state->parade_id;
-#endif
-		ret = lg216x_get_nog(state,
-				     &fe->dtv_property_cache.atscmh_nog);
-		if (lg_fail(ret))
-			goto fail;
-		ret = lg216x_get_tnog(state,
-				      &fe->dtv_property_cache.atscmh_tnog);
-		if (lg_fail(ret))
-			goto fail;
-		ret = lg216x_get_sgn(state,
-				     &fe->dtv_property_cache.atscmh_sgn);
-		if (lg_fail(ret))
-			goto fail;
-		ret = lg216x_get_prc(state,
-				     &fe->dtv_property_cache.atscmh_prc);
-		if (lg_fail(ret))
-			goto fail;
-
-		ret = lg216x_get_rs_frame_mode(state,
-			(enum atscmh_rs_frame_mode *)
-			&fe->dtv_property_cache.atscmh_rs_frame_mode);
-		if (lg_fail(ret))
-			goto fail;
-		ret = lg216x_get_rs_frame_ensemble(state,
-			(enum atscmh_rs_frame_ensemble *)
-			&fe->dtv_property_cache.atscmh_rs_frame_ensemble);
-		if (lg_fail(ret))
-			goto fail;
-		ret = lg216x_get_rs_code_mode(state,
-			(enum atscmh_rs_code_mode *)
-			&fe->dtv_property_cache.atscmh_rs_code_mode_pri,
-			(enum atscmh_rs_code_mode *)
-			&fe->dtv_property_cache.atscmh_rs_code_mode_sec);
-		if (lg_fail(ret))
-			goto fail;
-		ret = lg216x_get_sccc_block_mode(state,
-			(enum atscmh_sccc_block_mode *)
-			&fe->dtv_property_cache.atscmh_sccc_block_mode);
-		if (lg_fail(ret))
-			goto fail;
-		ret = lg216x_get_sccc_code_mode(state,
-			(enum atscmh_sccc_code_mode *)
-			&fe->dtv_property_cache.atscmh_sccc_code_mode_a,
-			(enum atscmh_sccc_code_mode *)
-			&fe->dtv_property_cache.atscmh_sccc_code_mode_b,
-			(enum atscmh_sccc_code_mode *)
-			&fe->dtv_property_cache.atscmh_sccc_code_mode_c,
-			(enum atscmh_sccc_code_mode *)
-			&fe->dtv_property_cache.atscmh_sccc_code_mode_d);
-		if (lg_fail(ret))
-			goto fail;
-	}
-#if 0
-	ret = lg216x_read_fic_err_count(state,
-				(u8 *)&fe->dtv_property_cache.atscmh_fic_err);
-	if (lg_fail(ret))
-		goto fail;
-	ret = lg216x_read_crc_err_count(state,
-				&fe->dtv_property_cache.atscmh_crc_err);
-	if (lg_fail(ret))
-		goto fail;
-	ret = lg216x_read_rs_err_count(state,
-				&fe->dtv_property_cache.atscmh_rs_err);
-	if (lg_fail(ret))
-		goto fail;
-
-	switch (state->cfg->lg_chip) {
-	case LG2160:
-		if (((fe->dtv_property_cache.atscmh_rs_err >= 240) &&
-		     (fe->dtv_property_cache.atscmh_crc_err >= 240)) &&
-		    ((jiffies_to_msecs(jiffies) - state->last_reset) > 6000))
-			ret = lg216x_soft_reset(state);
-		break;
-	case LG2161:
-		/* no fix needed here (as far as we know) */
-		ret = 0;
-		break;
-	}
-	lg_fail(ret);
-#endif
-fail:
-	return ret;
-}
-
-static int lg216x_get_property(struct dvb_frontend *fe,
-			       struct dtv_property *tvp)
-{
-	return (DTV_ATSCMH_FIC_VER == tvp->cmd) ?
-		lg216x_get_frontend(fe) : 0;
-}
-
-
-static int lg2160_set_frontend(struct dvb_frontend *fe)
-{
-	struct lg216x_state *state = fe->demodulator_priv;
-	int ret;
-
-	lg_dbg("(%d)\n", fe->dtv_property_cache.frequency);
-
-	if (fe->ops.tuner_ops.set_params) {
-		ret = fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-		if (lg_fail(ret))
-			goto fail;
-		state->current_frequency = fe->dtv_property_cache.frequency;
-	}
-
-	ret = lg2160_agc_fix(state, 0, 0);
-	if (lg_fail(ret))
-		goto fail;
-	ret = lg2160_agc_polarity(state, 0, 0);
-	if (lg_fail(ret))
-		goto fail;
-	ret = lg2160_tuner_pwr_save_polarity(state, 1);
-	if (lg_fail(ret))
-		goto fail;
-	ret = lg216x_set_if(state);
-	if (lg_fail(ret))
-		goto fail;
-	ret = lg2160_spectrum_polarity(state, state->cfg->spectral_inversion);
-	if (lg_fail(ret))
-		goto fail;
-
-	/* be tuned before this point */
-	ret = lg216x_soft_reset(state);
-	if (lg_fail(ret))
-		goto fail;
-
-	ret = lg2160_tuner_pwr_save(state, 0);
-	if (lg_fail(ret))
-		goto fail;
-
-	switch (state->cfg->lg_chip) {
-	case LG2160:
-		ret = lg2160_set_spi_clock(state);
-		if (lg_fail(ret))
-			goto fail;
-		break;
-	case LG2161:
-		ret = lg2161_set_output_interface(state);
-		if (lg_fail(ret))
-			goto fail;
-		break;
-	}
-
-	ret = lg216x_set_parade(state, fe->dtv_property_cache.atscmh_parade_id);
-	if (lg_fail(ret))
-		goto fail;
-
-	ret = lg216x_set_ensemble(state,
-			fe->dtv_property_cache.atscmh_rs_frame_ensemble);
-	if (lg_fail(ret))
-		goto fail;
-
-	ret = lg216x_initialize(state);
-	if (lg_fail(ret))
-		goto fail;
-
-	ret = lg216x_enable_fic(state, 1);
-	lg_fail(ret);
-
-	lg216x_get_frontend(fe);
-fail:
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int lg2160_read_lock_status(struct lg216x_state *state,
-				   int *acq_lock, int *sync_lock)
-{
-	u8 val;
-	int ret;
-
-	*acq_lock = 0;
-	*sync_lock = 0;
-
-	ret = lg216x_read_reg(state, 0x011b, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	*sync_lock = (val & 0x20) ? 0 : 1;
-	*acq_lock  = (val & 0x40) ? 0 : 1;
-fail:
-	return ret;
-}
-
-#ifdef USE_LG2161_LOCK_BITS
-static int lg2161_read_lock_status(struct lg216x_state *state,
-				   int *acq_lock, int *sync_lock)
-{
-	u8 val;
-	int ret;
-
-	*acq_lock = 0;
-	*sync_lock = 0;
-
-	ret = lg216x_read_reg(state, 0x0304, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	*sync_lock = (val & 0x80) ? 0 : 1;
-
-	ret = lg216x_read_reg(state, 0x011b, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	*acq_lock  = (val & 0x40) ? 0 : 1;
-fail:
-	return ret;
-}
-#endif
-
-static int lg216x_read_lock_status(struct lg216x_state *state,
-				   int *acq_lock, int *sync_lock)
-{
-#ifdef USE_LG2161_LOCK_BITS
-	int ret;
-	switch (state->cfg->lg_chip) {
-	case LG2160:
-		ret = lg2160_read_lock_status(state, acq_lock, sync_lock);
-		break;
-	case LG2161:
-		ret = lg2161_read_lock_status(state, acq_lock, sync_lock);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	return ret;
-#else
-	return lg2160_read_lock_status(state, acq_lock, sync_lock);
-#endif
-}
-
-static int lg216x_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct lg216x_state *state = fe->demodulator_priv;
-	int ret, acq_lock, sync_lock;
-
-	*status = 0;
-
-	ret = lg216x_read_lock_status(state, &acq_lock, &sync_lock);
-	if (lg_fail(ret))
-		goto fail;
-
-	lg_dbg("%s%s\n",
-	       acq_lock  ? "SIGNALEXIST " : "",
-	       sync_lock ? "SYNCLOCK"     : "");
-
-	if (acq_lock)
-		*status |= FE_HAS_SIGNAL;
-	if (sync_lock)
-		*status |= FE_HAS_SYNC;
-
-	if (*status)
-		*status |= FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_LOCK;
-
-fail:
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int lg2160_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct lg216x_state *state = fe->demodulator_priv;
-	u8 snr1, snr2;
-	int ret;
-
-	*snr = 0;
-
-	ret = lg216x_read_reg(state, 0x0202, &snr1);
-	if (lg_fail(ret))
-		goto fail;
-
-	ret = lg216x_read_reg(state, 0x0203, &snr2);
-	if (lg_fail(ret))
-		goto fail;
-
-	if ((snr1 == 0xba) || (snr2 == 0xdf))
-		*snr = 0;
-	else
-#if 1
-	*snr =  ((snr1 >> 4) * 100) + ((snr1 & 0x0f) * 10) + (snr2 >> 4);
-#else /* BCD */
-	*snr =  (snr2 | (snr1 << 8));
-#endif
-fail:
-	return ret;
-}
-
-static int lg2161_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct lg216x_state *state = fe->demodulator_priv;
-	u8 snr1, snr2;
-	int ret;
-
-	*snr = 0;
-
-	ret = lg216x_read_reg(state, 0x0302, &snr1);
-	if (lg_fail(ret))
-		goto fail;
-
-	ret = lg216x_read_reg(state, 0x0303, &snr2);
-	if (lg_fail(ret))
-		goto fail;
-
-	if ((snr1 == 0xba) || (snr2 == 0xfd))
-		*snr = 0;
-	else
-
-	*snr =  ((snr1 >> 4) * 100) + ((snr1 & 0x0f) * 10) + (snr2 & 0x0f);
-fail:
-	return ret;
-}
-
-static int lg216x_read_signal_strength(struct dvb_frontend *fe,
-				       u16 *strength)
-{
-#if 0
-	/* borrowed from lgdt330x.c
-	 *
-	 * Calculate strength from SNR up to 35dB
-	 * Even though the SNR can go higher than 35dB,
-	 * there is some comfort factor in having a range of
-	 * strong signals that can show at 100%
-	 */
-	struct lg216x_state *state = fe->demodulator_priv;
-	u16 snr;
-	int ret;
-#endif
-	*strength = 0;
-#if 0
-	ret = fe->ops.read_snr(fe, &snr);
-	if (lg_fail(ret))
-		goto fail;
-	/* Rather than use the 8.8 value snr, use state->snr which is 8.24 */
-	/* scale the range 0 - 35*2^24 into 0 - 65535 */
-	if (state->snr >= 8960 * 0x10000)
-		*strength = 0xffff;
-	else
-		*strength = state->snr / 8960;
-fail:
-	return ret;
-#else
-	return 0;
-#endif
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int lg216x_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-#if 0
-	struct lg216x_state *state = fe->demodulator_priv;
-	int ret;
-
-	ret = lg216x_read_rs_err_count(state,
-				       &fe->dtv_property_cache.atscmh_rs_err);
-	if (lg_fail(ret))
-		goto fail;
-
-	*ucblocks = fe->dtv_property_cache.atscmh_rs_err;
-fail:
-#else
-	*ucblocks = 0;
-#endif
-	return 0;
-}
-
-static int lg216x_get_tune_settings(struct dvb_frontend *fe,
-				    struct dvb_frontend_tune_settings
-				    *fe_tune_settings)
-{
-	fe_tune_settings->min_delay_ms = 500;
-	lg_dbg("\n");
-	return 0;
-}
-
-static void lg216x_release(struct dvb_frontend *fe)
-{
-	struct lg216x_state *state = fe->demodulator_priv;
-	lg_dbg("\n");
-	kfree(state);
-}
-
-static struct dvb_frontend_ops lg2160_ops = {
-	.delsys = { SYS_ATSCMH },
-	.info = {
-		.name = "LG Electronics LG2160 ATSC/MH Frontend",
-		.frequency_min      = 54000000,
-		.frequency_max      = 858000000,
-		.frequency_stepsize = 62500,
-	},
-	.i2c_gate_ctrl        = lg216x_i2c_gate_ctrl,
-#if 0
-	.init                 = lg216x_init,
-	.sleep                = lg216x_sleep,
-#endif
-	.get_property         = lg216x_get_property,
-
-	.set_frontend         = lg2160_set_frontend,
-	.get_frontend         = lg216x_get_frontend,
-	.get_tune_settings    = lg216x_get_tune_settings,
-	.read_status          = lg216x_read_status,
-#if 0
-	.read_ber             = lg216x_read_ber,
-#endif
-	.read_signal_strength = lg216x_read_signal_strength,
-	.read_snr             = lg2160_read_snr,
-	.read_ucblocks        = lg216x_read_ucblocks,
-	.release              = lg216x_release,
-};
-
-static struct dvb_frontend_ops lg2161_ops = {
-	.delsys = { SYS_ATSCMH },
-	.info = {
-		.name = "LG Electronics LG2161 ATSC/MH Frontend",
-		.frequency_min      = 54000000,
-		.frequency_max      = 858000000,
-		.frequency_stepsize = 62500,
-	},
-	.i2c_gate_ctrl        = lg216x_i2c_gate_ctrl,
-#if 0
-	.init                 = lg216x_init,
-	.sleep                = lg216x_sleep,
-#endif
-	.get_property         = lg216x_get_property,
-
-	.set_frontend         = lg2160_set_frontend,
-	.get_frontend         = lg216x_get_frontend,
-	.get_tune_settings    = lg216x_get_tune_settings,
-	.read_status          = lg216x_read_status,
-#if 0
-	.read_ber             = lg216x_read_ber,
-#endif
-	.read_signal_strength = lg216x_read_signal_strength,
-	.read_snr             = lg2161_read_snr,
-	.read_ucblocks        = lg216x_read_ucblocks,
-	.release              = lg216x_release,
-};
-
-struct dvb_frontend *lg2160_attach(const struct lg2160_config *config,
-				   struct i2c_adapter *i2c_adap)
-{
-	struct lg216x_state *state = NULL;
-
-	lg_dbg("(%d-%04x)\n",
-	       i2c_adap ? i2c_adapter_id(i2c_adap) : 0,
-	       config ? config->i2c_addr : 0);
-
-	state = kzalloc(sizeof(struct lg216x_state), GFP_KERNEL);
-	if (state == NULL)
-		goto fail;
-
-	state->cfg = config;
-	state->i2c_adap = i2c_adap;
-	state->fic_ver = 0xff;
-	state->parade_id = 0xff;
-
-	switch (config->lg_chip) {
-	default:
-		lg_warn("invalid chip requested, defaulting to LG2160");
-		/* fall-thru */
-	case LG2160:
-		memcpy(&state->frontend.ops, &lg2160_ops,
-		       sizeof(struct dvb_frontend_ops));
-		break;
-	case LG2161:
-		memcpy(&state->frontend.ops, &lg2161_ops,
-		       sizeof(struct dvb_frontend_ops));
-		break;
-	}
-
-	state->frontend.demodulator_priv = state;
-	state->current_frequency = -1;
-	/* parade 1 by default */
-	state->frontend.dtv_property_cache.atscmh_parade_id = 1;
-
-	return &state->frontend;
-fail:
-	lg_warn("unable to detect LG216x hardware\n");
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(lg2160_attach);
-
-MODULE_DESCRIPTION("LG Electronics LG216x ATSC/MH Demodulator Driver");
-MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("0.3");
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/frontends/lg2160.h b/drivers/media/dvb/frontends/lg2160.h
deleted file mode 100644
index 9e2c0f4..0000000
--- a/drivers/media/dvb/frontends/lg2160.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- *    Support for LG2160 - ATSC/MH
- *
- *    Copyright (C) 2010 Michael Krufky <mkrufky@linuxtv.org>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _LG2160_H_
-#define _LG2160_H_
-
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-
-enum lg_chip_type {
-	LG2160 = 0,
-	LG2161 = 1,
-};
-
-#define LG2161_1019 LG2161
-#define LG2161_1040 LG2161
-
-enum lg2160_spi_clock {
-	LG2160_SPI_3_125_MHZ = 0,
-	LG2160_SPI_6_25_MHZ = 1,
-	LG2160_SPI_12_5_MHZ = 2,
-};
-
-#if 0
-enum lg2161_oif {
-	LG2161_OIF_EBI2_SLA  = 1,
-	LG2161_OIF_SDIO_SLA  = 2,
-	LG2161_OIF_SPI_SLA   = 3,
-	LG2161_OIF_SPI_MAS   = 4,
-	LG2161_OIF_SERIAL_TS = 7,
-};
-#endif
-
-struct lg2160_config {
-	u8 i2c_addr;
-
-	/* user defined IF frequency in KHz */
-	u16 if_khz;
-
-	/* disable i2c repeater - 0:repeater enabled 1:repeater disabled */
-	int deny_i2c_rptr:1;
-
-	/* spectral inversion - 0:disabled 1:enabled */
-	int spectral_inversion:1;
-
-	unsigned int output_if;
-	enum lg2160_spi_clock spi_clock;
-	enum lg_chip_type lg_chip;
-};
-
-#if defined(CONFIG_DVB_LG2160) || (defined(CONFIG_DVB_LG2160_MODULE) && \
-				     defined(MODULE))
-extern
-struct dvb_frontend *lg2160_attach(const struct lg2160_config *config,
-				     struct i2c_adapter *i2c_adap);
-#else
-static inline
-struct dvb_frontend *lg2160_attach(const struct lg2160_config *config,
-				     struct i2c_adapter *i2c_adap)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_LG2160 */
-
-#endif /* _LG2160_H_ */
diff --git a/drivers/media/dvb/frontends/lgdt3305.c b/drivers/media/dvb/frontends/lgdt3305.c
deleted file mode 100644
index 1d2c473..0000000
--- a/drivers/media/dvb/frontends/lgdt3305.c
+++ /dev/null
@@ -1,1222 +0,0 @@
-/*
- *    Support for LG Electronics LGDT3304 and LGDT3305 - VSB/QAM
- *
- *    Copyright (C) 2008, 2009, 2010 Michael Krufky <mkrufky@linuxtv.org>
- *
- *    LGDT3304 support by Jarod Wilson <jarod@redhat.com>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <asm/div64.h>
-#include <linux/dvb/frontend.h>
-#include <linux/slab.h>
-#include "dvb_math.h"
-#include "lgdt3305.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debug level (info=1, reg=2 (or-able))");
-
-#define DBG_INFO 1
-#define DBG_REG  2
-
-#define lg_printk(kern, fmt, arg...)					\
-	printk(kern "%s: " fmt, __func__, ##arg)
-
-#define lg_info(fmt, arg...)	printk(KERN_INFO "lgdt3305: " fmt, ##arg)
-#define lg_warn(fmt, arg...)	lg_printk(KERN_WARNING,       fmt, ##arg)
-#define lg_err(fmt, arg...)	lg_printk(KERN_ERR,           fmt, ##arg)
-#define lg_dbg(fmt, arg...) if (debug & DBG_INFO)			\
-				lg_printk(KERN_DEBUG,         fmt, ##arg)
-#define lg_reg(fmt, arg...) if (debug & DBG_REG)			\
-				lg_printk(KERN_DEBUG,         fmt, ##arg)
-
-#define lg_fail(ret)							\
-({									\
-	int __ret;							\
-	__ret = (ret < 0);						\
-	if (__ret)							\
-		lg_err("error %d on line %d\n",	ret, __LINE__);		\
-	__ret;								\
-})
-
-struct lgdt3305_state {
-	struct i2c_adapter *i2c_adap;
-	const struct lgdt3305_config *cfg;
-
-	struct dvb_frontend frontend;
-
-	fe_modulation_t current_modulation;
-	u32 current_frequency;
-	u32 snr;
-};
-
-/* ------------------------------------------------------------------------ */
-
-/* FIXME: verify & document the LGDT3304 registers */
-
-#define LGDT3305_GEN_CTRL_1                   0x0000
-#define LGDT3305_GEN_CTRL_2                   0x0001
-#define LGDT3305_GEN_CTRL_3                   0x0002
-#define LGDT3305_GEN_STATUS                   0x0003
-#define LGDT3305_GEN_CONTROL                  0x0007
-#define LGDT3305_GEN_CTRL_4                   0x000a
-#define LGDT3305_DGTL_AGC_REF_1               0x0012
-#define LGDT3305_DGTL_AGC_REF_2               0x0013
-#define LGDT3305_CR_CTR_FREQ_1                0x0106
-#define LGDT3305_CR_CTR_FREQ_2                0x0107
-#define LGDT3305_CR_CTR_FREQ_3                0x0108
-#define LGDT3305_CR_CTR_FREQ_4                0x0109
-#define LGDT3305_CR_MSE_1                     0x011b
-#define LGDT3305_CR_MSE_2                     0x011c
-#define LGDT3305_CR_LOCK_STATUS               0x011d
-#define LGDT3305_CR_CTRL_7                    0x0126
-#define LGDT3305_AGC_POWER_REF_1              0x0300
-#define LGDT3305_AGC_POWER_REF_2              0x0301
-#define LGDT3305_AGC_DELAY_PT_1               0x0302
-#define LGDT3305_AGC_DELAY_PT_2               0x0303
-#define LGDT3305_RFAGC_LOOP_FLTR_BW_1         0x0306
-#define LGDT3305_RFAGC_LOOP_FLTR_BW_2         0x0307
-#define LGDT3305_IFBW_1                       0x0308
-#define LGDT3305_IFBW_2                       0x0309
-#define LGDT3305_AGC_CTRL_1                   0x030c
-#define LGDT3305_AGC_CTRL_4                   0x0314
-#define LGDT3305_EQ_MSE_1                     0x0413
-#define LGDT3305_EQ_MSE_2                     0x0414
-#define LGDT3305_EQ_MSE_3                     0x0415
-#define LGDT3305_PT_MSE_1                     0x0417
-#define LGDT3305_PT_MSE_2                     0x0418
-#define LGDT3305_PT_MSE_3                     0x0419
-#define LGDT3305_FEC_BLOCK_CTRL               0x0504
-#define LGDT3305_FEC_LOCK_STATUS              0x050a
-#define LGDT3305_FEC_PKT_ERR_1                0x050c
-#define LGDT3305_FEC_PKT_ERR_2                0x050d
-#define LGDT3305_TP_CTRL_1                    0x050e
-#define LGDT3305_BERT_PERIOD                  0x0801
-#define LGDT3305_BERT_ERROR_COUNT_1           0x080a
-#define LGDT3305_BERT_ERROR_COUNT_2           0x080b
-#define LGDT3305_BERT_ERROR_COUNT_3           0x080c
-#define LGDT3305_BERT_ERROR_COUNT_4           0x080d
-
-static int lgdt3305_write_reg(struct lgdt3305_state *state, u16 reg, u8 val)
-{
-	int ret;
-	u8 buf[] = { reg >> 8, reg & 0xff, val };
-	struct i2c_msg msg = {
-		.addr = state->cfg->i2c_addr, .flags = 0,
-		.buf = buf, .len = 3,
-	};
-
-	lg_reg("reg: 0x%04x, val: 0x%02x\n", reg, val);
-
-	ret = i2c_transfer(state->i2c_adap, &msg, 1);
-
-	if (ret != 1) {
-		lg_err("error (addr %02x %02x <- %02x, err = %i)\n",
-		       msg.buf[0], msg.buf[1], msg.buf[2], ret);
-		if (ret < 0)
-			return ret;
-		else
-			return -EREMOTEIO;
-	}
-	return 0;
-}
-
-static int lgdt3305_read_reg(struct lgdt3305_state *state, u16 reg, u8 *val)
-{
-	int ret;
-	u8 reg_buf[] = { reg >> 8, reg & 0xff };
-	struct i2c_msg msg[] = {
-		{ .addr = state->cfg->i2c_addr,
-		  .flags = 0, .buf = reg_buf, .len = 2 },
-		{ .addr = state->cfg->i2c_addr,
-		  .flags = I2C_M_RD, .buf = val, .len = 1 },
-	};
-
-	lg_reg("reg: 0x%04x\n", reg);
-
-	ret = i2c_transfer(state->i2c_adap, msg, 2);
-
-	if (ret != 2) {
-		lg_err("error (addr %02x reg %04x error (ret == %i)\n",
-		       state->cfg->i2c_addr, reg, ret);
-		if (ret < 0)
-			return ret;
-		else
-			return -EREMOTEIO;
-	}
-	return 0;
-}
-
-#define read_reg(state, reg)						\
-({									\
-	u8 __val;							\
-	int ret = lgdt3305_read_reg(state, reg, &__val);		\
-	if (lg_fail(ret))						\
-		__val = 0;						\
-	__val;								\
-})
-
-static int lgdt3305_set_reg_bit(struct lgdt3305_state *state,
-				u16 reg, int bit, int onoff)
-{
-	u8 val;
-	int ret;
-
-	lg_reg("reg: 0x%04x, bit: %d, level: %d\n", reg, bit, onoff);
-
-	ret = lgdt3305_read_reg(state, reg, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	val &= ~(1 << bit);
-	val |= (onoff & 1) << bit;
-
-	ret = lgdt3305_write_reg(state, reg, val);
-fail:
-	return ret;
-}
-
-struct lgdt3305_reg {
-	u16 reg;
-	u8 val;
-};
-
-static int lgdt3305_write_regs(struct lgdt3305_state *state,
-			       struct lgdt3305_reg *regs, int len)
-{
-	int i, ret;
-
-	lg_reg("writing %d registers...\n", len);
-
-	for (i = 0; i < len - 1; i++) {
-		ret = lgdt3305_write_reg(state, regs[i].reg, regs[i].val);
-		if (lg_fail(ret))
-			return ret;
-	}
-	return 0;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int lgdt3305_soft_reset(struct lgdt3305_state *state)
-{
-	int ret;
-
-	lg_dbg("\n");
-
-	ret = lgdt3305_set_reg_bit(state, LGDT3305_GEN_CTRL_3, 0, 0);
-	if (lg_fail(ret))
-		goto fail;
-
-	msleep(20);
-	ret = lgdt3305_set_reg_bit(state, LGDT3305_GEN_CTRL_3, 0, 1);
-fail:
-	return ret;
-}
-
-static inline int lgdt3305_mpeg_mode(struct lgdt3305_state *state,
-				     enum lgdt3305_mpeg_mode mode)
-{
-	lg_dbg("(%d)\n", mode);
-	return lgdt3305_set_reg_bit(state, LGDT3305_TP_CTRL_1, 5, mode);
-}
-
-static int lgdt3305_mpeg_mode_polarity(struct lgdt3305_state *state,
-				       enum lgdt3305_tp_clock_edge edge,
-				       enum lgdt3305_tp_valid_polarity valid)
-{
-	u8 val;
-	int ret;
-
-	lg_dbg("edge = %d, valid = %d\n", edge, valid);
-
-	ret = lgdt3305_read_reg(state, LGDT3305_TP_CTRL_1, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	val &= ~0x09;
-
-	if (edge)
-		val |= 0x08;
-	if (valid)
-		val |= 0x01;
-
-	ret = lgdt3305_write_reg(state, LGDT3305_TP_CTRL_1, val);
-	if (lg_fail(ret))
-		goto fail;
-
-	ret = lgdt3305_soft_reset(state);
-fail:
-	return ret;
-}
-
-static int lgdt3305_set_modulation(struct lgdt3305_state *state,
-				   struct dtv_frontend_properties *p)
-{
-	u8 opermode;
-	int ret;
-
-	lg_dbg("\n");
-
-	ret = lgdt3305_read_reg(state, LGDT3305_GEN_CTRL_1, &opermode);
-	if (lg_fail(ret))
-		goto fail;
-
-	opermode &= ~0x03;
-
-	switch (p->modulation) {
-	case VSB_8:
-		opermode |= 0x03;
-		break;
-	case QAM_64:
-		opermode |= 0x00;
-		break;
-	case QAM_256:
-		opermode |= 0x01;
-		break;
-	default:
-		return -EINVAL;
-	}
-	ret = lgdt3305_write_reg(state, LGDT3305_GEN_CTRL_1, opermode);
-fail:
-	return ret;
-}
-
-static int lgdt3305_set_filter_extension(struct lgdt3305_state *state,
-					 struct dtv_frontend_properties *p)
-{
-	int val;
-
-	switch (p->modulation) {
-	case VSB_8:
-		val = 0;
-		break;
-	case QAM_64:
-	case QAM_256:
-		val = 1;
-		break;
-	default:
-		return -EINVAL;
-	}
-	lg_dbg("val = %d\n", val);
-
-	return lgdt3305_set_reg_bit(state, 0x043f, 2, val);
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int lgdt3305_passband_digital_agc(struct lgdt3305_state *state,
-					 struct dtv_frontend_properties *p)
-{
-	u16 agc_ref;
-
-	switch (p->modulation) {
-	case VSB_8:
-		agc_ref = 0x32c4;
-		break;
-	case QAM_64:
-		agc_ref = 0x2a00;
-		break;
-	case QAM_256:
-		agc_ref = 0x2a80;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	lg_dbg("agc ref: 0x%04x\n", agc_ref);
-
-	lgdt3305_write_reg(state, LGDT3305_DGTL_AGC_REF_1, agc_ref >> 8);
-	lgdt3305_write_reg(state, LGDT3305_DGTL_AGC_REF_2, agc_ref & 0xff);
-
-	return 0;
-}
-
-static int lgdt3305_rfagc_loop(struct lgdt3305_state *state,
-			       struct dtv_frontend_properties *p)
-{
-	u16 ifbw, rfbw, agcdelay;
-
-	switch (p->modulation) {
-	case VSB_8:
-		agcdelay = 0x04c0;
-		rfbw     = 0x8000;
-		ifbw     = 0x8000;
-		break;
-	case QAM_64:
-	case QAM_256:
-		agcdelay = 0x046b;
-		rfbw     = 0x8889;
-		/* FIXME: investigate optimal ifbw & rfbw values for the
-		 *        DT3304 and re-write this switch..case block */
-		if (state->cfg->demod_chip == LGDT3304)
-			ifbw = 0x6666;
-		else /* (state->cfg->demod_chip == LGDT3305) */
-			ifbw = 0x8888;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (state->cfg->rf_agc_loop) {
-		lg_dbg("agcdelay: 0x%04x, rfbw: 0x%04x\n", agcdelay, rfbw);
-
-		/* rf agc loop filter bandwidth */
-		lgdt3305_write_reg(state, LGDT3305_AGC_DELAY_PT_1,
-				   agcdelay >> 8);
-		lgdt3305_write_reg(state, LGDT3305_AGC_DELAY_PT_2,
-				   agcdelay & 0xff);
-
-		lgdt3305_write_reg(state, LGDT3305_RFAGC_LOOP_FLTR_BW_1,
-				   rfbw >> 8);
-		lgdt3305_write_reg(state, LGDT3305_RFAGC_LOOP_FLTR_BW_2,
-				   rfbw & 0xff);
-	} else {
-		lg_dbg("ifbw: 0x%04x\n", ifbw);
-
-		/* if agc loop filter bandwidth */
-		lgdt3305_write_reg(state, LGDT3305_IFBW_1, ifbw >> 8);
-		lgdt3305_write_reg(state, LGDT3305_IFBW_2, ifbw & 0xff);
-	}
-
-	return 0;
-}
-
-static int lgdt3305_agc_setup(struct lgdt3305_state *state,
-			      struct dtv_frontend_properties *p)
-{
-	int lockdten, acqen;
-
-	switch (p->modulation) {
-	case VSB_8:
-		lockdten = 0;
-		acqen = 0;
-		break;
-	case QAM_64:
-	case QAM_256:
-		lockdten = 1;
-		acqen = 1;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	lg_dbg("lockdten = %d, acqen = %d\n", lockdten, acqen);
-
-	/* control agc function */
-	switch (state->cfg->demod_chip) {
-	case LGDT3304:
-		lgdt3305_write_reg(state, 0x0314, 0xe1 | lockdten << 1);
-		lgdt3305_set_reg_bit(state, 0x030e, 2, acqen);
-		break;
-	case LGDT3305:
-		lgdt3305_write_reg(state, LGDT3305_AGC_CTRL_4, 0xe1 | lockdten << 1);
-		lgdt3305_set_reg_bit(state, LGDT3305_AGC_CTRL_1, 2, acqen);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return lgdt3305_rfagc_loop(state, p);
-}
-
-static int lgdt3305_set_agc_power_ref(struct lgdt3305_state *state,
-				      struct dtv_frontend_properties *p)
-{
-	u16 usref = 0;
-
-	switch (p->modulation) {
-	case VSB_8:
-		if (state->cfg->usref_8vsb)
-			usref = state->cfg->usref_8vsb;
-		break;
-	case QAM_64:
-		if (state->cfg->usref_qam64)
-			usref = state->cfg->usref_qam64;
-		break;
-	case QAM_256:
-		if (state->cfg->usref_qam256)
-			usref = state->cfg->usref_qam256;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (usref) {
-		lg_dbg("set manual mode: 0x%04x\n", usref);
-
-		lgdt3305_set_reg_bit(state, LGDT3305_AGC_CTRL_1, 3, 1);
-
-		lgdt3305_write_reg(state, LGDT3305_AGC_POWER_REF_1,
-				   0xff & (usref >> 8));
-		lgdt3305_write_reg(state, LGDT3305_AGC_POWER_REF_2,
-				   0xff & (usref >> 0));
-	}
-	return 0;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int lgdt3305_spectral_inversion(struct lgdt3305_state *state,
-				       struct dtv_frontend_properties *p,
-				       int inversion)
-{
-	int ret;
-
-	lg_dbg("(%d)\n", inversion);
-
-	switch (p->modulation) {
-	case VSB_8:
-		ret = lgdt3305_write_reg(state, LGDT3305_CR_CTRL_7,
-					 inversion ? 0xf9 : 0x79);
-		break;
-	case QAM_64:
-	case QAM_256:
-		ret = lgdt3305_write_reg(state, LGDT3305_FEC_BLOCK_CTRL,
-					 inversion ? 0xfd : 0xff);
-		break;
-	default:
-		ret = -EINVAL;
-	}
-	return ret;
-}
-
-static int lgdt3305_set_if(struct lgdt3305_state *state,
-			   struct dtv_frontend_properties *p)
-{
-	u16 if_freq_khz;
-	u8 nco1, nco2, nco3, nco4;
-	u64 nco;
-
-	switch (p->modulation) {
-	case VSB_8:
-		if_freq_khz = state->cfg->vsb_if_khz;
-		break;
-	case QAM_64:
-	case QAM_256:
-		if_freq_khz = state->cfg->qam_if_khz;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	nco = if_freq_khz / 10;
-
-	switch (p->modulation) {
-	case VSB_8:
-		nco <<= 24;
-		do_div(nco, 625);
-		break;
-	case QAM_64:
-	case QAM_256:
-		nco <<= 28;
-		do_div(nco, 625);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	nco1 = (nco >> 24) & 0x3f;
-	nco1 |= 0x40;
-	nco2 = (nco >> 16) & 0xff;
-	nco3 = (nco >> 8) & 0xff;
-	nco4 = nco & 0xff;
-
-	lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_1, nco1);
-	lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_2, nco2);
-	lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_3, nco3);
-	lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_4, nco4);
-
-	lg_dbg("%d KHz -> [%02x%02x%02x%02x]\n",
-	       if_freq_khz, nco1, nco2, nco3, nco4);
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int lgdt3305_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct lgdt3305_state *state = fe->demodulator_priv;
-
-	if (state->cfg->deny_i2c_rptr)
-		return 0;
-
-	lg_dbg("(%d)\n", enable);
-
-	return lgdt3305_set_reg_bit(state, LGDT3305_GEN_CTRL_2, 5,
-				    enable ? 0 : 1);
-}
-
-static int lgdt3305_sleep(struct dvb_frontend *fe)
-{
-	struct lgdt3305_state *state = fe->demodulator_priv;
-	u8 gen_ctrl_3, gen_ctrl_4;
-
-	lg_dbg("\n");
-
-	gen_ctrl_3 = read_reg(state, LGDT3305_GEN_CTRL_3);
-	gen_ctrl_4 = read_reg(state, LGDT3305_GEN_CTRL_4);
-
-	/* hold in software reset while sleeping */
-	gen_ctrl_3 &= ~0x01;
-	/* tristate the IF-AGC pin */
-	gen_ctrl_3 |=  0x02;
-	/* tristate the RF-AGC pin */
-	gen_ctrl_3 |=  0x04;
-
-	/* disable vsb/qam module */
-	gen_ctrl_4 &= ~0x01;
-	/* disable adc module */
-	gen_ctrl_4 &= ~0x02;
-
-	lgdt3305_write_reg(state, LGDT3305_GEN_CTRL_3, gen_ctrl_3);
-	lgdt3305_write_reg(state, LGDT3305_GEN_CTRL_4, gen_ctrl_4);
-
-	return 0;
-}
-
-static int lgdt3305_init(struct dvb_frontend *fe)
-{
-	struct lgdt3305_state *state = fe->demodulator_priv;
-	int ret;
-
-	static struct lgdt3305_reg lgdt3304_init_data[] = {
-		{ .reg = LGDT3305_GEN_CTRL_1,           .val = 0x03, },
-		{ .reg = 0x000d,                        .val = 0x02, },
-		{ .reg = 0x000e,                        .val = 0x02, },
-		{ .reg = LGDT3305_DGTL_AGC_REF_1,       .val = 0x32, },
-		{ .reg = LGDT3305_DGTL_AGC_REF_2,       .val = 0xc4, },
-		{ .reg = LGDT3305_CR_CTR_FREQ_1,        .val = 0x00, },
-		{ .reg = LGDT3305_CR_CTR_FREQ_2,        .val = 0x00, },
-		{ .reg = LGDT3305_CR_CTR_FREQ_3,        .val = 0x00, },
-		{ .reg = LGDT3305_CR_CTR_FREQ_4,        .val = 0x00, },
-		{ .reg = LGDT3305_CR_CTRL_7,            .val = 0xf9, },
-		{ .reg = 0x0112,                        .val = 0x17, },
-		{ .reg = 0x0113,                        .val = 0x15, },
-		{ .reg = 0x0114,                        .val = 0x18, },
-		{ .reg = 0x0115,                        .val = 0xff, },
-		{ .reg = 0x0116,                        .val = 0x3c, },
-		{ .reg = 0x0214,                        .val = 0x67, },
-		{ .reg = 0x0424,                        .val = 0x8d, },
-		{ .reg = 0x0427,                        .val = 0x12, },
-		{ .reg = 0x0428,                        .val = 0x4f, },
-		{ .reg = LGDT3305_IFBW_1,               .val = 0x80, },
-		{ .reg = LGDT3305_IFBW_2,               .val = 0x00, },
-		{ .reg = 0x030a,                        .val = 0x08, },
-		{ .reg = 0x030b,                        .val = 0x9b, },
-		{ .reg = 0x030d,                        .val = 0x00, },
-		{ .reg = 0x030e,                        .val = 0x1c, },
-		{ .reg = 0x0314,                        .val = 0xe1, },
-		{ .reg = 0x000d,                        .val = 0x82, },
-		{ .reg = LGDT3305_TP_CTRL_1,            .val = 0x5b, },
-		{ .reg = LGDT3305_TP_CTRL_1,            .val = 0x5b, },
-	};
-
-	static struct lgdt3305_reg lgdt3305_init_data[] = {
-		{ .reg = LGDT3305_GEN_CTRL_1,           .val = 0x03, },
-		{ .reg = LGDT3305_GEN_CTRL_2,           .val = 0xb0, },
-		{ .reg = LGDT3305_GEN_CTRL_3,           .val = 0x01, },
-		{ .reg = LGDT3305_GEN_CONTROL,          .val = 0x6f, },
-		{ .reg = LGDT3305_GEN_CTRL_4,           .val = 0x03, },
-		{ .reg = LGDT3305_DGTL_AGC_REF_1,       .val = 0x32, },
-		{ .reg = LGDT3305_DGTL_AGC_REF_2,       .val = 0xc4, },
-		{ .reg = LGDT3305_CR_CTR_FREQ_1,        .val = 0x00, },
-		{ .reg = LGDT3305_CR_CTR_FREQ_2,        .val = 0x00, },
-		{ .reg = LGDT3305_CR_CTR_FREQ_3,        .val = 0x00, },
-		{ .reg = LGDT3305_CR_CTR_FREQ_4,        .val = 0x00, },
-		{ .reg = LGDT3305_CR_CTRL_7,            .val = 0x79, },
-		{ .reg = LGDT3305_AGC_POWER_REF_1,      .val = 0x32, },
-		{ .reg = LGDT3305_AGC_POWER_REF_2,      .val = 0xc4, },
-		{ .reg = LGDT3305_AGC_DELAY_PT_1,       .val = 0x0d, },
-		{ .reg = LGDT3305_AGC_DELAY_PT_2,       .val = 0x30, },
-		{ .reg = LGDT3305_RFAGC_LOOP_FLTR_BW_1, .val = 0x80, },
-		{ .reg = LGDT3305_RFAGC_LOOP_FLTR_BW_2, .val = 0x00, },
-		{ .reg = LGDT3305_IFBW_1,               .val = 0x80, },
-		{ .reg = LGDT3305_IFBW_2,               .val = 0x00, },
-		{ .reg = LGDT3305_AGC_CTRL_1,           .val = 0x30, },
-		{ .reg = LGDT3305_AGC_CTRL_4,           .val = 0x61, },
-		{ .reg = LGDT3305_FEC_BLOCK_CTRL,       .val = 0xff, },
-		{ .reg = LGDT3305_TP_CTRL_1,            .val = 0x1b, },
-	};
-
-	lg_dbg("\n");
-
-	switch (state->cfg->demod_chip) {
-	case LGDT3304:
-		ret = lgdt3305_write_regs(state, lgdt3304_init_data,
-					  ARRAY_SIZE(lgdt3304_init_data));
-		break;
-	case LGDT3305:
-		ret = lgdt3305_write_regs(state, lgdt3305_init_data,
-					  ARRAY_SIZE(lgdt3305_init_data));
-		break;
-	default:
-		ret = -EINVAL;
-	}
-	if (lg_fail(ret))
-		goto fail;
-
-	ret = lgdt3305_soft_reset(state);
-fail:
-	return ret;
-}
-
-static int lgdt3304_set_parameters(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct lgdt3305_state *state = fe->demodulator_priv;
-	int ret;
-
-	lg_dbg("(%d, %d)\n", p->frequency, p->modulation);
-
-	if (fe->ops.tuner_ops.set_params) {
-		ret = fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-		if (lg_fail(ret))
-			goto fail;
-		state->current_frequency = p->frequency;
-	}
-
-	ret = lgdt3305_set_modulation(state, p);
-	if (lg_fail(ret))
-		goto fail;
-
-	ret = lgdt3305_passband_digital_agc(state, p);
-	if (lg_fail(ret))
-		goto fail;
-
-	ret = lgdt3305_agc_setup(state, p);
-	if (lg_fail(ret))
-		goto fail;
-
-	/* reg 0x030d is 3304-only... seen in vsb and qam usbsnoops... */
-	switch (p->modulation) {
-	case VSB_8:
-		lgdt3305_write_reg(state, 0x030d, 0x00);
-		lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_1, 0x4f);
-		lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_2, 0x0c);
-		lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_3, 0xac);
-		lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_4, 0xba);
-		break;
-	case QAM_64:
-	case QAM_256:
-		lgdt3305_write_reg(state, 0x030d, 0x14);
-		ret = lgdt3305_set_if(state, p);
-		if (lg_fail(ret))
-			goto fail;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-
-	ret = lgdt3305_spectral_inversion(state, p,
-					  state->cfg->spectral_inversion
-					  ? 1 : 0);
-	if (lg_fail(ret))
-		goto fail;
-
-	state->current_modulation = p->modulation;
-
-	ret = lgdt3305_mpeg_mode(state, state->cfg->mpeg_mode);
-	if (lg_fail(ret))
-		goto fail;
-
-	/* lgdt3305_mpeg_mode_polarity calls lgdt3305_soft_reset */
-	ret = lgdt3305_mpeg_mode_polarity(state,
-					  state->cfg->tpclk_edge,
-					  state->cfg->tpvalid_polarity);
-fail:
-	return ret;
-}
-
-static int lgdt3305_set_parameters(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct lgdt3305_state *state = fe->demodulator_priv;
-	int ret;
-
-	lg_dbg("(%d, %d)\n", p->frequency, p->modulation);
-
-	if (fe->ops.tuner_ops.set_params) {
-		ret = fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-		if (lg_fail(ret))
-			goto fail;
-		state->current_frequency = p->frequency;
-	}
-
-	ret = lgdt3305_set_modulation(state, p);
-	if (lg_fail(ret))
-		goto fail;
-
-	ret = lgdt3305_passband_digital_agc(state, p);
-	if (lg_fail(ret))
-		goto fail;
-	ret = lgdt3305_set_agc_power_ref(state, p);
-	if (lg_fail(ret))
-		goto fail;
-	ret = lgdt3305_agc_setup(state, p);
-	if (lg_fail(ret))
-		goto fail;
-
-	/* low if */
-	ret = lgdt3305_write_reg(state, LGDT3305_GEN_CONTROL, 0x2f);
-	if (lg_fail(ret))
-		goto fail;
-	ret = lgdt3305_set_reg_bit(state, LGDT3305_CR_CTR_FREQ_1, 6, 1);
-	if (lg_fail(ret))
-		goto fail;
-
-	ret = lgdt3305_set_if(state, p);
-	if (lg_fail(ret))
-		goto fail;
-	ret = lgdt3305_spectral_inversion(state, p,
-					  state->cfg->spectral_inversion
-					  ? 1 : 0);
-	if (lg_fail(ret))
-		goto fail;
-
-	ret = lgdt3305_set_filter_extension(state, p);
-	if (lg_fail(ret))
-		goto fail;
-
-	state->current_modulation = p->modulation;
-
-	ret = lgdt3305_mpeg_mode(state, state->cfg->mpeg_mode);
-	if (lg_fail(ret))
-		goto fail;
-
-	/* lgdt3305_mpeg_mode_polarity calls lgdt3305_soft_reset */
-	ret = lgdt3305_mpeg_mode_polarity(state,
-					  state->cfg->tpclk_edge,
-					  state->cfg->tpvalid_polarity);
-fail:
-	return ret;
-}
-
-static int lgdt3305_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct lgdt3305_state *state = fe->demodulator_priv;
-
-	lg_dbg("\n");
-
-	p->modulation = state->current_modulation;
-	p->frequency = state->current_frequency;
-	return 0;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int lgdt3305_read_cr_lock_status(struct lgdt3305_state *state,
-					int *locked)
-{
-	u8 val;
-	int ret;
-	char *cr_lock_state = "";
-
-	*locked = 0;
-
-	ret = lgdt3305_read_reg(state, LGDT3305_CR_LOCK_STATUS, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	switch (state->current_modulation) {
-	case QAM_256:
-	case QAM_64:
-		if (val & (1 << 1))
-			*locked = 1;
-
-		switch (val & 0x07) {
-		case 0:
-			cr_lock_state = "QAM UNLOCK";
-			break;
-		case 4:
-			cr_lock_state = "QAM 1stLock";
-			break;
-		case 6:
-			cr_lock_state = "QAM 2ndLock";
-			break;
-		case 7:
-			cr_lock_state = "QAM FinalLock";
-			break;
-		default:
-			cr_lock_state = "CLOCKQAM-INVALID!";
-			break;
-		}
-		break;
-	case VSB_8:
-		if (val & (1 << 7)) {
-			*locked = 1;
-			cr_lock_state = "CLOCKVSB";
-		}
-		break;
-	default:
-		ret = -EINVAL;
-	}
-	lg_dbg("(%d) %s\n", *locked, cr_lock_state);
-fail:
-	return ret;
-}
-
-static int lgdt3305_read_fec_lock_status(struct lgdt3305_state *state,
-					 int *locked)
-{
-	u8 val;
-	int ret, mpeg_lock, fec_lock, viterbi_lock;
-
-	*locked = 0;
-
-	switch (state->current_modulation) {
-	case QAM_256:
-	case QAM_64:
-		ret = lgdt3305_read_reg(state,
-					LGDT3305_FEC_LOCK_STATUS, &val);
-		if (lg_fail(ret))
-			goto fail;
-
-		mpeg_lock    = (val & (1 << 0)) ? 1 : 0;
-		fec_lock     = (val & (1 << 2)) ? 1 : 0;
-		viterbi_lock = (val & (1 << 3)) ? 1 : 0;
-
-		*locked = mpeg_lock && fec_lock && viterbi_lock;
-
-		lg_dbg("(%d) %s%s%s\n", *locked,
-		       mpeg_lock    ? "mpeg lock  "  : "",
-		       fec_lock     ? "fec lock  "   : "",
-		       viterbi_lock ? "viterbi lock" : "");
-		break;
-	case VSB_8:
-	default:
-		ret = -EINVAL;
-	}
-fail:
-	return ret;
-}
-
-static int lgdt3305_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct lgdt3305_state *state = fe->demodulator_priv;
-	u8 val;
-	int ret, signal, inlock, nofecerr, snrgood,
-		cr_lock, fec_lock, sync_lock;
-
-	*status = 0;
-
-	ret = lgdt3305_read_reg(state, LGDT3305_GEN_STATUS, &val);
-	if (lg_fail(ret))
-		goto fail;
-
-	signal    = (val & (1 << 4)) ? 1 : 0;
-	inlock    = (val & (1 << 3)) ? 0 : 1;
-	sync_lock = (val & (1 << 2)) ? 1 : 0;
-	nofecerr  = (val & (1 << 1)) ? 1 : 0;
-	snrgood   = (val & (1 << 0)) ? 1 : 0;
-
-	lg_dbg("%s%s%s%s%s\n",
-	       signal    ? "SIGNALEXIST " : "",
-	       inlock    ? "INLOCK "      : "",
-	       sync_lock ? "SYNCLOCK "    : "",
-	       nofecerr  ? "NOFECERR "    : "",
-	       snrgood   ? "SNRGOOD "     : "");
-
-	ret = lgdt3305_read_cr_lock_status(state, &cr_lock);
-	if (lg_fail(ret))
-		goto fail;
-
-	if (signal)
-		*status |= FE_HAS_SIGNAL;
-	if (cr_lock)
-		*status |= FE_HAS_CARRIER;
-	if (nofecerr)
-		*status |= FE_HAS_VITERBI;
-	if (sync_lock)
-		*status |= FE_HAS_SYNC;
-
-	switch (state->current_modulation) {
-	case QAM_256:
-	case QAM_64:
-		/* signal bit is unreliable on the DT3304 in QAM mode */
-		if (((LGDT3304 == state->cfg->demod_chip)) && (cr_lock))
-			*status |= FE_HAS_SIGNAL;
-
-		ret = lgdt3305_read_fec_lock_status(state, &fec_lock);
-		if (lg_fail(ret))
-			goto fail;
-
-		if (fec_lock)
-			*status |= FE_HAS_LOCK;
-		break;
-	case VSB_8:
-		if (inlock)
-			*status |= FE_HAS_LOCK;
-		break;
-	default:
-		ret = -EINVAL;
-	}
-fail:
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-
-/* borrowed from lgdt330x.c */
-static u32 calculate_snr(u32 mse, u32 c)
-{
-	if (mse == 0) /* no signal */
-		return 0;
-
-	mse = intlog10(mse);
-	if (mse > c) {
-		/* Negative SNR, which is possible, but realisticly the
-		demod will lose lock before the signal gets this bad.  The
-		API only allows for unsigned values, so just return 0 */
-		return 0;
-	}
-	return 10*(c - mse);
-}
-
-static int lgdt3305_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct lgdt3305_state *state = fe->demodulator_priv;
-	u32 noise;	/* noise value */
-	u32 c;		/* per-modulation SNR calculation constant */
-
-	switch (state->current_modulation) {
-	case VSB_8:
-#ifdef USE_PTMSE
-		/* Use Phase Tracker Mean-Square Error Register */
-		/* SNR for ranges from -13.11 to +44.08 */
-		noise =	((read_reg(state, LGDT3305_PT_MSE_1) & 0x07) << 16) |
-			(read_reg(state, LGDT3305_PT_MSE_2) << 8) |
-			(read_reg(state, LGDT3305_PT_MSE_3) & 0xff);
-		c = 73957994; /* log10(25*32^2)*2^24 */
-#else
-		/* Use Equalizer Mean-Square Error Register */
-		/* SNR for ranges from -16.12 to +44.08 */
-		noise =	((read_reg(state, LGDT3305_EQ_MSE_1) & 0x0f) << 16) |
-			(read_reg(state, LGDT3305_EQ_MSE_2) << 8) |
-			(read_reg(state, LGDT3305_EQ_MSE_3) & 0xff);
-		c = 73957994; /* log10(25*32^2)*2^24 */
-#endif
-		break;
-	case QAM_64:
-	case QAM_256:
-		noise = (read_reg(state, LGDT3305_CR_MSE_1) << 8) |
-			(read_reg(state, LGDT3305_CR_MSE_2) & 0xff);
-
-		c = (state->current_modulation == QAM_64) ?
-			97939837 : 98026066;
-		/* log10(688128)*2^24 and log10(696320)*2^24 */
-		break;
-	default:
-		return -EINVAL;
-	}
-	state->snr = calculate_snr(noise, c);
-	/* report SNR in dB * 10 */
-	*snr = (state->snr / ((1 << 24) / 10));
-	lg_dbg("noise = 0x%08x, snr = %d.%02d dB\n", noise,
-	       state->snr >> 24, (((state->snr >> 8) & 0xffff) * 100) >> 16);
-
-	return 0;
-}
-
-static int lgdt3305_read_signal_strength(struct dvb_frontend *fe,
-					 u16 *strength)
-{
-	/* borrowed from lgdt330x.c
-	 *
-	 * Calculate strength from SNR up to 35dB
-	 * Even though the SNR can go higher than 35dB,
-	 * there is some comfort factor in having a range of
-	 * strong signals that can show at 100%
-	 */
-	struct lgdt3305_state *state = fe->demodulator_priv;
-	u16 snr;
-	int ret;
-
-	*strength = 0;
-
-	ret = fe->ops.read_snr(fe, &snr);
-	if (lg_fail(ret))
-		goto fail;
-	/* Rather than use the 8.8 value snr, use state->snr which is 8.24 */
-	/* scale the range 0 - 35*2^24 into 0 - 65535 */
-	if (state->snr >= 8960 * 0x10000)
-		*strength = 0xffff;
-	else
-		*strength = state->snr / 8960;
-fail:
-	return ret;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int lgdt3305_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	*ber = 0;
-	return 0;
-}
-
-static int lgdt3305_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	struct lgdt3305_state *state = fe->demodulator_priv;
-
-	*ucblocks =
-		(read_reg(state, LGDT3305_FEC_PKT_ERR_1) << 8) |
-		(read_reg(state, LGDT3305_FEC_PKT_ERR_2) & 0xff);
-
-	return 0;
-}
-
-static int lgdt3305_get_tune_settings(struct dvb_frontend *fe,
-				      struct dvb_frontend_tune_settings
-					*fe_tune_settings)
-{
-	fe_tune_settings->min_delay_ms = 500;
-	lg_dbg("\n");
-	return 0;
-}
-
-static void lgdt3305_release(struct dvb_frontend *fe)
-{
-	struct lgdt3305_state *state = fe->demodulator_priv;
-	lg_dbg("\n");
-	kfree(state);
-}
-
-static struct dvb_frontend_ops lgdt3304_ops;
-static struct dvb_frontend_ops lgdt3305_ops;
-
-struct dvb_frontend *lgdt3305_attach(const struct lgdt3305_config *config,
-				     struct i2c_adapter *i2c_adap)
-{
-	struct lgdt3305_state *state = NULL;
-	int ret;
-	u8 val;
-
-	lg_dbg("(%d-%04x)\n",
-	       i2c_adap ? i2c_adapter_id(i2c_adap) : 0,
-	       config ? config->i2c_addr : 0);
-
-	state = kzalloc(sizeof(struct lgdt3305_state), GFP_KERNEL);
-	if (state == NULL)
-		goto fail;
-
-	state->cfg = config;
-	state->i2c_adap = i2c_adap;
-
-	switch (config->demod_chip) {
-	case LGDT3304:
-		memcpy(&state->frontend.ops, &lgdt3304_ops,
-		       sizeof(struct dvb_frontend_ops));
-		break;
-	case LGDT3305:
-		memcpy(&state->frontend.ops, &lgdt3305_ops,
-		       sizeof(struct dvb_frontend_ops));
-		break;
-	default:
-		goto fail;
-	}
-	state->frontend.demodulator_priv = state;
-
-	/* verify that we're talking to a lg dt3304/5 */
-	ret = lgdt3305_read_reg(state, LGDT3305_GEN_CTRL_2, &val);
-	if ((lg_fail(ret)) | (val == 0))
-		goto fail;
-	ret = lgdt3305_write_reg(state, 0x0808, 0x80);
-	if (lg_fail(ret))
-		goto fail;
-	ret = lgdt3305_read_reg(state, 0x0808, &val);
-	if ((lg_fail(ret)) | (val != 0x80))
-		goto fail;
-	ret = lgdt3305_write_reg(state, 0x0808, 0x00);
-	if (lg_fail(ret))
-		goto fail;
-
-	state->current_frequency = -1;
-	state->current_modulation = -1;
-
-	return &state->frontend;
-fail:
-	lg_warn("unable to detect %s hardware\n",
-		config->demod_chip ? "LGDT3304" : "LGDT3305");
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(lgdt3305_attach);
-
-static struct dvb_frontend_ops lgdt3304_ops = {
-	.delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
-	.info = {
-		.name = "LG Electronics LGDT3304 VSB/QAM Frontend",
-		.frequency_min      = 54000000,
-		.frequency_max      = 858000000,
-		.frequency_stepsize = 62500,
-		.caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
-	},
-	.i2c_gate_ctrl        = lgdt3305_i2c_gate_ctrl,
-	.init                 = lgdt3305_init,
-	.set_frontend         = lgdt3304_set_parameters,
-	.get_frontend         = lgdt3305_get_frontend,
-	.get_tune_settings    = lgdt3305_get_tune_settings,
-	.read_status          = lgdt3305_read_status,
-	.read_ber             = lgdt3305_read_ber,
-	.read_signal_strength = lgdt3305_read_signal_strength,
-	.read_snr             = lgdt3305_read_snr,
-	.read_ucblocks        = lgdt3305_read_ucblocks,
-	.release              = lgdt3305_release,
-};
-
-static struct dvb_frontend_ops lgdt3305_ops = {
-	.delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
-	.info = {
-		.name = "LG Electronics LGDT3305 VSB/QAM Frontend",
-		.frequency_min      = 54000000,
-		.frequency_max      = 858000000,
-		.frequency_stepsize = 62500,
-		.caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
-	},
-	.i2c_gate_ctrl        = lgdt3305_i2c_gate_ctrl,
-	.init                 = lgdt3305_init,
-	.sleep                = lgdt3305_sleep,
-	.set_frontend         = lgdt3305_set_parameters,
-	.get_frontend         = lgdt3305_get_frontend,
-	.get_tune_settings    = lgdt3305_get_tune_settings,
-	.read_status          = lgdt3305_read_status,
-	.read_ber             = lgdt3305_read_ber,
-	.read_signal_strength = lgdt3305_read_signal_strength,
-	.read_snr             = lgdt3305_read_snr,
-	.read_ucblocks        = lgdt3305_read_ucblocks,
-	.release              = lgdt3305_release,
-};
-
-MODULE_DESCRIPTION("LG Electronics LGDT3304/5 ATSC/QAM-B Demodulator Driver");
-MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("0.2");
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/frontends/lgdt3305.h b/drivers/media/dvb/frontends/lgdt3305.h
deleted file mode 100644
index 02172ec..0000000
--- a/drivers/media/dvb/frontends/lgdt3305.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *    Support for LG Electronics LGDT3304 and LGDT3305 - VSB/QAM
- *
- *    Copyright (C) 2008, 2009, 2010 Michael Krufky <mkrufky@linuxtv.org>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _LGDT3305_H_
-#define _LGDT3305_H_
-
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-
-
-enum lgdt3305_mpeg_mode {
-	LGDT3305_MPEG_PARALLEL = 0,
-	LGDT3305_MPEG_SERIAL = 1,
-};
-
-enum lgdt3305_tp_clock_edge {
-	LGDT3305_TPCLK_RISING_EDGE = 0,
-	LGDT3305_TPCLK_FALLING_EDGE = 1,
-};
-
-enum lgdt3305_tp_valid_polarity {
-	LGDT3305_TP_VALID_LOW = 0,
-	LGDT3305_TP_VALID_HIGH = 1,
-};
-
-enum lgdt_demod_chip_type {
-	LGDT3305 = 0,
-	LGDT3304 = 1,
-};
-
-struct lgdt3305_config {
-	u8 i2c_addr;
-
-	/* user defined IF frequency in KHz */
-	u16 qam_if_khz;
-	u16 vsb_if_khz;
-
-	/* AGC Power reference - defaults are used if left unset */
-	u16 usref_8vsb;   /* default: 0x32c4 */
-	u16 usref_qam64;  /* default: 0x5400 */
-	u16 usref_qam256; /* default: 0x2a80 */
-
-	/* disable i2c repeater - 0:repeater enabled 1:repeater disabled */
-	unsigned int deny_i2c_rptr:1;
-
-	/* spectral inversion - 0:disabled 1:enabled */
-	unsigned int spectral_inversion:1;
-
-	/* use RF AGC loop - 0:disabled 1:enabled */
-	unsigned int rf_agc_loop:1;
-
-	enum lgdt3305_mpeg_mode mpeg_mode;
-	enum lgdt3305_tp_clock_edge tpclk_edge;
-	enum lgdt3305_tp_valid_polarity tpvalid_polarity;
-	enum lgdt_demod_chip_type demod_chip;
-};
-
-#if defined(CONFIG_DVB_LGDT3305) || (defined(CONFIG_DVB_LGDT3305_MODULE) && \
-				     defined(MODULE))
-extern
-struct dvb_frontend *lgdt3305_attach(const struct lgdt3305_config *config,
-				     struct i2c_adapter *i2c_adap);
-#else
-static inline
-struct dvb_frontend *lgdt3305_attach(const struct lgdt3305_config *config,
-				     struct i2c_adapter *i2c_adap)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_LGDT3305 */
-
-#endif /* _LGDT3305_H_ */
diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c
deleted file mode 100644
index e046622..0000000
--- a/drivers/media/dvb/frontends/lgdt330x.c
+++ /dev/null
@@ -1,831 +0,0 @@
-/*
- *    Support for LGDT3302 and LGDT3303 - VSB/QAM
- *
- *    Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- *                      NOTES ABOUT THIS DRIVER
- *
- * This Linux driver supports:
- *   DViCO FusionHDTV 3 Gold-Q
- *   DViCO FusionHDTV 3 Gold-T
- *   DViCO FusionHDTV 5 Gold
- *   DViCO FusionHDTV 5 Lite
- *   DViCO FusionHDTV 5 USB Gold
- *   Air2PC/AirStar 2 ATSC 3rd generation (HD5000)
- *   pcHDTV HD5500
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <asm/byteorder.h>
-
-#include "dvb_frontend.h"
-#include "dvb_math.h"
-#include "lgdt330x_priv.h"
-#include "lgdt330x.h"
-
-/* Use Equalizer Mean Squared Error instead of Phaser Tracker MSE */
-/* #define USE_EQMSE */
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug,"Turn on/off lgdt330x frontend debugging (default:off).");
-#define dprintk(args...) \
-do { \
-if (debug) printk(KERN_DEBUG "lgdt330x: " args); \
-} while (0)
-
-struct lgdt330x_state
-{
-	struct i2c_adapter* i2c;
-
-	/* Configuration settings */
-	const struct lgdt330x_config* config;
-
-	struct dvb_frontend frontend;
-
-	/* Demodulator private data */
-	fe_modulation_t current_modulation;
-	u32 snr; /* Result of last SNR calculation */
-
-	/* Tuner private data */
-	u32 current_frequency;
-};
-
-static int i2c_write_demod_bytes (struct lgdt330x_state* state,
-				  u8 *buf, /* data bytes to send */
-				  int len  /* number of bytes to send */ )
-{
-	struct i2c_msg msg =
-		{ .addr = state->config->demod_address,
-		  .flags = 0,
-		  .buf = buf,
-		  .len = 2 };
-	int i;
-	int err;
-
-	for (i=0; i<len-1; i+=2){
-		if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
-			printk(KERN_WARNING "lgdt330x: %s error (addr %02x <- %02x, err = %i)\n", __func__, msg.buf[0], msg.buf[1], err);
-			if (err < 0)
-				return err;
-			else
-				return -EREMOTEIO;
-		}
-		msg.buf += 2;
-	}
-	return 0;
-}
-
-/*
- * This routine writes the register (reg) to the demod bus
- * then reads the data returned for (len) bytes.
- */
-
-static int i2c_read_demod_bytes(struct lgdt330x_state *state,
-				enum I2C_REG reg, u8 *buf, int len)
-{
-	u8 wr [] = { reg };
-	struct i2c_msg msg [] = {
-		{ .addr = state->config->demod_address,
-		  .flags = 0, .buf = wr,  .len = 1 },
-		{ .addr = state->config->demod_address,
-		  .flags = I2C_M_RD, .buf = buf, .len = len },
-	};
-	int ret;
-	ret = i2c_transfer(state->i2c, msg, 2);
-	if (ret != 2) {
-		printk(KERN_WARNING "lgdt330x: %s: addr 0x%02x select 0x%02x error (ret == %i)\n", __func__, state->config->demod_address, reg, ret);
-		if (ret >= 0)
-			ret = -EIO;
-	} else {
-		ret = 0;
-	}
-	return ret;
-}
-
-/* Software reset */
-static int lgdt3302_SwReset(struct lgdt330x_state* state)
-{
-	u8 ret;
-	u8 reset[] = {
-		IRQ_MASK,
-		0x00 /* bit 6 is active low software reset
-		      *	bits 5-0 are 1 to mask interrupts */
-	};
-
-	ret = i2c_write_demod_bytes(state,
-				    reset, sizeof(reset));
-	if (ret == 0) {
-
-		/* force reset high (inactive) and unmask interrupts */
-		reset[1] = 0x7f;
-		ret = i2c_write_demod_bytes(state,
-					    reset, sizeof(reset));
-	}
-	return ret;
-}
-
-static int lgdt3303_SwReset(struct lgdt330x_state* state)
-{
-	u8 ret;
-	u8 reset[] = {
-		0x02,
-		0x00 /* bit 0 is active low software reset */
-	};
-
-	ret = i2c_write_demod_bytes(state,
-				    reset, sizeof(reset));
-	if (ret == 0) {
-
-		/* force reset high (inactive) */
-		reset[1] = 0x01;
-		ret = i2c_write_demod_bytes(state,
-					    reset, sizeof(reset));
-	}
-	return ret;
-}
-
-static int lgdt330x_SwReset(struct lgdt330x_state* state)
-{
-	switch (state->config->demod_chip) {
-	case LGDT3302:
-		return lgdt3302_SwReset(state);
-	case LGDT3303:
-		return lgdt3303_SwReset(state);
-	default:
-		return -ENODEV;
-	}
-}
-
-static int lgdt330x_init(struct dvb_frontend* fe)
-{
-	/* Hardware reset is done using gpio[0] of cx23880x chip.
-	 * I'd like to do it here, but don't know how to find chip address.
-	 * cx88-cards.c arranges for the reset bit to be inactive (high).
-	 * Maybe there needs to be a callable function in cx88-core or
-	 * the caller of this function needs to do it. */
-
-	/*
-	 * Array of byte pairs <address, value>
-	 * to initialize each different chip
-	 */
-	static u8 lgdt3302_init_data[] = {
-		/* Use 50MHz parameter values from spec sheet since xtal is 50 */
-		/* Change the value of NCOCTFV[25:0] of carrier
-		   recovery center frequency register */
-		VSB_CARRIER_FREQ0, 0x00,
-		VSB_CARRIER_FREQ1, 0x87,
-		VSB_CARRIER_FREQ2, 0x8e,
-		VSB_CARRIER_FREQ3, 0x01,
-		/* Change the TPCLK pin polarity
-		   data is valid on falling clock */
-		DEMUX_CONTROL, 0xfb,
-		/* Change the value of IFBW[11:0] of
-		   AGC IF/RF loop filter bandwidth register */
-		AGC_RF_BANDWIDTH0, 0x40,
-		AGC_RF_BANDWIDTH1, 0x93,
-		AGC_RF_BANDWIDTH2, 0x00,
-		/* Change the value of bit 6, 'nINAGCBY' and
-		   'NSSEL[1:0] of ACG function control register 2 */
-		AGC_FUNC_CTRL2, 0xc6,
-		/* Change the value of bit 6 'RFFIX'
-		   of AGC function control register 3 */
-		AGC_FUNC_CTRL3, 0x40,
-		/* Set the value of 'INLVTHD' register 0x2a/0x2c
-		   to 0x7fe */
-		AGC_DELAY0, 0x07,
-		AGC_DELAY2, 0xfe,
-		/* Change the value of IAGCBW[15:8]
-		   of inner AGC loop filter bandwidth */
-		AGC_LOOP_BANDWIDTH0, 0x08,
-		AGC_LOOP_BANDWIDTH1, 0x9a
-	};
-
-	static u8 lgdt3303_init_data[] = {
-		0x4c, 0x14
-	};
-
-	static u8 flip_1_lgdt3303_init_data[] = {
-		0x4c, 0x14,
-		0x87, 0xf3
-	};
-
-	static u8 flip_2_lgdt3303_init_data[] = {
-		0x4c, 0x14,
-		0x87, 0xda
-	};
-
-	struct lgdt330x_state* state = fe->demodulator_priv;
-	char  *chip_name;
-	int    err;
-
-	switch (state->config->demod_chip) {
-	case LGDT3302:
-		chip_name = "LGDT3302";
-		err = i2c_write_demod_bytes(state, lgdt3302_init_data,
-					    sizeof(lgdt3302_init_data));
-		break;
-	case LGDT3303:
-		chip_name = "LGDT3303";
-		switch (state->config->clock_polarity_flip) {
-		case 2:
-			err = i2c_write_demod_bytes(state,
-					flip_2_lgdt3303_init_data,
-					sizeof(flip_2_lgdt3303_init_data));
-			break;
-		case 1:
-			err = i2c_write_demod_bytes(state,
-					flip_1_lgdt3303_init_data,
-					sizeof(flip_1_lgdt3303_init_data));
-			break;
-		case 0:
-		default:
-			err = i2c_write_demod_bytes(state, lgdt3303_init_data,
-						    sizeof(lgdt3303_init_data));
-		}
-		break;
-	default:
-		chip_name = "undefined";
-		printk (KERN_WARNING "Only LGDT3302 and LGDT3303 are supported chips.\n");
-		err = -ENODEV;
-	}
-	dprintk("%s entered as %s\n", __func__, chip_name);
-	if (err < 0)
-		return err;
-	return lgdt330x_SwReset(state);
-}
-
-static int lgdt330x_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	*ber = 0; /* Not supplied by the demod chips */
-	return 0;
-}
-
-static int lgdt330x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct lgdt330x_state* state = fe->demodulator_priv;
-	int err;
-	u8 buf[2];
-
-	*ucblocks = 0;
-
-	switch (state->config->demod_chip) {
-	case LGDT3302:
-		err = i2c_read_demod_bytes(state, LGDT3302_PACKET_ERR_COUNTER1,
-					   buf, sizeof(buf));
-		break;
-	case LGDT3303:
-		err = i2c_read_demod_bytes(state, LGDT3303_PACKET_ERR_COUNTER1,
-					   buf, sizeof(buf));
-		break;
-	default:
-		printk(KERN_WARNING
-		       "Only LGDT3302 and LGDT3303 are supported chips.\n");
-		err = -ENODEV;
-	}
-	if (err < 0)
-		return err;
-
-	*ucblocks = (buf[0] << 8) | buf[1];
-	return 0;
-}
-
-static int lgdt330x_set_parameters(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	/*
-	 * Array of byte pairs <address, value>
-	 * to initialize 8VSB for lgdt3303 chip 50 MHz IF
-	 */
-	static u8 lgdt3303_8vsb_44_data[] = {
-		0x04, 0x00,
-		0x0d, 0x40,
-		0x0e, 0x87,
-		0x0f, 0x8e,
-		0x10, 0x01,
-		0x47, 0x8b };
-
-	/*
-	 * Array of byte pairs <address, value>
-	 * to initialize QAM for lgdt3303 chip
-	 */
-	static u8 lgdt3303_qam_data[] = {
-		0x04, 0x00,
-		0x0d, 0x00,
-		0x0e, 0x00,
-		0x0f, 0x00,
-		0x10, 0x00,
-		0x51, 0x63,
-		0x47, 0x66,
-		0x48, 0x66,
-		0x4d, 0x1a,
-		0x49, 0x08,
-		0x4a, 0x9b };
-
-	struct lgdt330x_state* state = fe->demodulator_priv;
-
-	static u8 top_ctrl_cfg[]   = { TOP_CONTROL, 0x03 };
-
-	int err = 0;
-	/* Change only if we are actually changing the modulation */
-	if (state->current_modulation != p->modulation) {
-		switch (p->modulation) {
-		case VSB_8:
-			dprintk("%s: VSB_8 MODE\n", __func__);
-
-			/* Select VSB mode */
-			top_ctrl_cfg[1] = 0x03;
-
-			/* Select ANT connector if supported by card */
-			if (state->config->pll_rf_set)
-				state->config->pll_rf_set(fe, 1);
-
-			if (state->config->demod_chip == LGDT3303) {
-				err = i2c_write_demod_bytes(state, lgdt3303_8vsb_44_data,
-							    sizeof(lgdt3303_8vsb_44_data));
-			}
-			break;
-
-		case QAM_64:
-			dprintk("%s: QAM_64 MODE\n", __func__);
-
-			/* Select QAM_64 mode */
-			top_ctrl_cfg[1] = 0x00;
-
-			/* Select CABLE connector if supported by card */
-			if (state->config->pll_rf_set)
-				state->config->pll_rf_set(fe, 0);
-
-			if (state->config->demod_chip == LGDT3303) {
-				err = i2c_write_demod_bytes(state, lgdt3303_qam_data,
-											sizeof(lgdt3303_qam_data));
-			}
-			break;
-
-		case QAM_256:
-			dprintk("%s: QAM_256 MODE\n", __func__);
-
-			/* Select QAM_256 mode */
-			top_ctrl_cfg[1] = 0x01;
-
-			/* Select CABLE connector if supported by card */
-			if (state->config->pll_rf_set)
-				state->config->pll_rf_set(fe, 0);
-
-			if (state->config->demod_chip == LGDT3303) {
-				err = i2c_write_demod_bytes(state, lgdt3303_qam_data,
-											sizeof(lgdt3303_qam_data));
-			}
-			break;
-		default:
-			printk(KERN_WARNING "lgdt330x: %s: Modulation type(%d) UNSUPPORTED\n", __func__, p->modulation);
-			return -1;
-		}
-		if (err < 0)
-			printk(KERN_WARNING "lgdt330x: %s: error blasting "
-			       "bytes to lgdt3303 for modulation type(%d)\n",
-			       __func__, p->modulation);
-
-		/*
-		 * select serial or parallel MPEG harware interface
-		 * Serial:   0x04 for LGDT3302 or 0x40 for LGDT3303
-		 * Parallel: 0x00
-		 */
-		top_ctrl_cfg[1] |= state->config->serial_mpeg;
-
-		/* Select the requested mode */
-		i2c_write_demod_bytes(state, top_ctrl_cfg,
-				      sizeof(top_ctrl_cfg));
-		if (state->config->set_ts_params)
-			state->config->set_ts_params(fe, 0);
-		state->current_modulation = p->modulation;
-	}
-
-	/* Tune to the specified frequency */
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	/* Keep track of the new frequency */
-	/* FIXME this is the wrong way to do this...           */
-	/* The tuner is shared with the video4linux analog API */
-	state->current_frequency = p->frequency;
-
-	lgdt330x_SwReset(state);
-	return 0;
-}
-
-static int lgdt330x_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct lgdt330x_state *state = fe->demodulator_priv;
-	p->frequency = state->current_frequency;
-	return 0;
-}
-
-static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct lgdt330x_state* state = fe->demodulator_priv;
-	u8 buf[3];
-
-	*status = 0; /* Reset status result */
-
-	/* AGC status register */
-	i2c_read_demod_bytes(state, AGC_STATUS, buf, 1);
-	dprintk("%s: AGC_STATUS = 0x%02x\n", __func__, buf[0]);
-	if ((buf[0] & 0x0c) == 0x8){
-		/* Test signal does not exist flag */
-		/* as well as the AGC lock flag.   */
-		*status |= FE_HAS_SIGNAL;
-	}
-
-	/*
-	 * You must set the Mask bits to 1 in the IRQ_MASK in order
-	 * to see that status bit in the IRQ_STATUS register.
-	 * This is done in SwReset();
-	 */
-	/* signal status */
-	i2c_read_demod_bytes(state, TOP_CONTROL, buf, sizeof(buf));
-	dprintk("%s: TOP_CONTROL = 0x%02x, IRO_MASK = 0x%02x, IRQ_STATUS = 0x%02x\n", __func__, buf[0], buf[1], buf[2]);
-
-
-	/* sync status */
-	if ((buf[2] & 0x03) == 0x01) {
-		*status |= FE_HAS_SYNC;
-	}
-
-	/* FEC error status */
-	if ((buf[2] & 0x0c) == 0x08) {
-		*status |= FE_HAS_LOCK;
-		*status |= FE_HAS_VITERBI;
-	}
-
-	/* Carrier Recovery Lock Status Register */
-	i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1);
-	dprintk("%s: CARRIER_LOCK = 0x%02x\n", __func__, buf[0]);
-	switch (state->current_modulation) {
-	case QAM_256:
-	case QAM_64:
-		/* Need to understand why there are 3 lock levels here */
-		if ((buf[0] & 0x07) == 0x07)
-			*status |= FE_HAS_CARRIER;
-		break;
-	case VSB_8:
-		if ((buf[0] & 0x80) == 0x80)
-			*status |= FE_HAS_CARRIER;
-		break;
-	default:
-		printk(KERN_WARNING "lgdt330x: %s: Modulation set to unsupported value\n", __func__);
-	}
-
-	return 0;
-}
-
-static int lgdt3303_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct lgdt330x_state* state = fe->demodulator_priv;
-	int err;
-	u8 buf[3];
-
-	*status = 0; /* Reset status result */
-
-	/* lgdt3303 AGC status register */
-	err = i2c_read_demod_bytes(state, 0x58, buf, 1);
-	if (err < 0)
-		return err;
-
-	dprintk("%s: AGC_STATUS = 0x%02x\n", __func__, buf[0]);
-	if ((buf[0] & 0x21) == 0x01){
-		/* Test input signal does not exist flag */
-		/* as well as the AGC lock flag.   */
-		*status |= FE_HAS_SIGNAL;
-	}
-
-	/* Carrier Recovery Lock Status Register */
-	i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1);
-	dprintk("%s: CARRIER_LOCK = 0x%02x\n", __func__, buf[0]);
-	switch (state->current_modulation) {
-	case QAM_256:
-	case QAM_64:
-		/* Need to understand why there are 3 lock levels here */
-		if ((buf[0] & 0x07) == 0x07)
-			*status |= FE_HAS_CARRIER;
-		else
-			break;
-		i2c_read_demod_bytes(state, 0x8a, buf, 1);
-		if ((buf[0] & 0x04) == 0x04)
-			*status |= FE_HAS_SYNC;
-		if ((buf[0] & 0x01) == 0x01)
-			*status |= FE_HAS_LOCK;
-		if ((buf[0] & 0x08) == 0x08)
-			*status |= FE_HAS_VITERBI;
-		break;
-	case VSB_8:
-		if ((buf[0] & 0x80) == 0x80)
-			*status |= FE_HAS_CARRIER;
-		else
-			break;
-		i2c_read_demod_bytes(state, 0x38, buf, 1);
-		if ((buf[0] & 0x02) == 0x00)
-			*status |= FE_HAS_SYNC;
-		if ((buf[0] & 0x01) == 0x01) {
-			*status |= FE_HAS_LOCK;
-			*status |= FE_HAS_VITERBI;
-		}
-		break;
-	default:
-		printk(KERN_WARNING "lgdt330x: %s: Modulation set to unsupported value\n", __func__);
-	}
-	return 0;
-}
-
-/* Calculate SNR estimation (scaled by 2^24)
-
-   8-VSB SNR equations from LGDT3302 and LGDT3303 datasheets, QAM
-   equations from LGDT3303 datasheet.  VSB is the same between the '02
-   and '03, so maybe QAM is too?  Perhaps someone with a newer datasheet
-   that has QAM information could verify?
-
-   For 8-VSB: (two ways, take your pick)
-   LGDT3302:
-     SNR_EQ = 10 * log10(25 * 24^2 / EQ_MSE)
-   LGDT3303:
-     SNR_EQ = 10 * log10(25 * 32^2 / EQ_MSE)
-   LGDT3302 & LGDT3303:
-     SNR_PT = 10 * log10(25 * 32^2 / PT_MSE)  (we use this one)
-   For 64-QAM:
-     SNR    = 10 * log10( 688128   / MSEQAM)
-   For 256-QAM:
-     SNR    = 10 * log10( 696320   / MSEQAM)
-
-   We re-write the snr equation as:
-     SNR * 2^24 = 10*(c - intlog10(MSE))
-   Where for 256-QAM, c = log10(696320) * 2^24, and so on. */
-
-static u32 calculate_snr(u32 mse, u32 c)
-{
-	if (mse == 0) /* No signal */
-		return 0;
-
-	mse = intlog10(mse);
-	if (mse > c) {
-		/* Negative SNR, which is possible, but realisticly the
-		demod will lose lock before the signal gets this bad.  The
-		API only allows for unsigned values, so just return 0 */
-		return 0;
-	}
-	return 10*(c - mse);
-}
-
-static int lgdt3302_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
-	u8 buf[5];	/* read data buffer */
-	u32 noise;	/* noise value */
-	u32 c;		/* per-modulation SNR calculation constant */
-
-	switch(state->current_modulation) {
-	case VSB_8:
-		i2c_read_demod_bytes(state, LGDT3302_EQPH_ERR0, buf, 5);
-#ifdef USE_EQMSE
-		/* Use Equalizer Mean-Square Error Register */
-		/* SNR for ranges from -15.61 to +41.58 */
-		noise = ((buf[0] & 7) << 16) | (buf[1] << 8) | buf[2];
-		c = 69765745; /* log10(25*24^2)*2^24 */
-#else
-		/* Use Phase Tracker Mean-Square Error Register */
-		/* SNR for ranges from -13.11 to +44.08 */
-		noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4];
-		c = 73957994; /* log10(25*32^2)*2^24 */
-#endif
-		break;
-	case QAM_64:
-	case QAM_256:
-		i2c_read_demod_bytes(state, CARRIER_MSEQAM1, buf, 2);
-		noise = ((buf[0] & 3) << 8) | buf[1];
-		c = state->current_modulation == QAM_64 ? 97939837 : 98026066;
-		/* log10(688128)*2^24 and log10(696320)*2^24 */
-		break;
-	default:
-		printk(KERN_ERR "lgdt330x: %s: Modulation set to unsupported value\n",
-		       __func__);
-		return -EREMOTEIO; /* return -EDRIVER_IS_GIBBERED; */
-	}
-
-	state->snr = calculate_snr(noise, c);
-	*snr = (state->snr) >> 16; /* Convert from 8.24 fixed-point to 8.8 */
-
-	dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __func__, noise,
-		state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16);
-
-	return 0;
-}
-
-static int lgdt3303_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
-	u8 buf[5];	/* read data buffer */
-	u32 noise;	/* noise value */
-	u32 c;		/* per-modulation SNR calculation constant */
-
-	switch(state->current_modulation) {
-	case VSB_8:
-		i2c_read_demod_bytes(state, LGDT3303_EQPH_ERR0, buf, 5);
-#ifdef USE_EQMSE
-		/* Use Equalizer Mean-Square Error Register */
-		/* SNR for ranges from -16.12 to +44.08 */
-		noise = ((buf[0] & 0x78) << 13) | (buf[1] << 8) | buf[2];
-		c = 73957994; /* log10(25*32^2)*2^24 */
-#else
-		/* Use Phase Tracker Mean-Square Error Register */
-		/* SNR for ranges from -13.11 to +44.08 */
-		noise = ((buf[0] & 7) << 16) | (buf[3] << 8) | buf[4];
-		c = 73957994; /* log10(25*32^2)*2^24 */
-#endif
-		break;
-	case QAM_64:
-	case QAM_256:
-		i2c_read_demod_bytes(state, CARRIER_MSEQAM1, buf, 2);
-		noise = (buf[0] << 8) | buf[1];
-		c = state->current_modulation == QAM_64 ? 97939837 : 98026066;
-		/* log10(688128)*2^24 and log10(696320)*2^24 */
-		break;
-	default:
-		printk(KERN_ERR "lgdt330x: %s: Modulation set to unsupported value\n",
-		       __func__);
-		return -EREMOTEIO; /* return -EDRIVER_IS_GIBBERED; */
-	}
-
-	state->snr = calculate_snr(noise, c);
-	*snr = (state->snr) >> 16; /* Convert from 8.24 fixed-point to 8.8 */
-
-	dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __func__, noise,
-		state->snr >> 24, (((state->snr >> 8) & 0xffff) * 100) >> 16);
-
-	return 0;
-}
-
-static int lgdt330x_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	/* Calculate Strength from SNR up to 35dB */
-	/* Even though the SNR can go higher than 35dB, there is some comfort */
-	/* factor in having a range of strong signals that can show at 100%   */
-	struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
-	u16 snr;
-	int ret;
-
-	ret = fe->ops.read_snr(fe, &snr);
-	if (ret != 0)
-		return ret;
-	/* Rather than use the 8.8 value snr, use state->snr which is 8.24 */
-	/* scale the range 0 - 35*2^24 into 0 - 65535 */
-	if (state->snr >= 8960 * 0x10000)
-		*strength = 0xffff;
-	else
-		*strength = state->snr / 8960;
-
-	return 0;
-}
-
-static int lgdt330x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings)
-{
-	/* I have no idea about this - it may not be needed */
-	fe_tune_settings->min_delay_ms = 500;
-	fe_tune_settings->step_size = 0;
-	fe_tune_settings->max_drift = 0;
-	return 0;
-}
-
-static void lgdt330x_release(struct dvb_frontend* fe)
-{
-	struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops lgdt3302_ops;
-static struct dvb_frontend_ops lgdt3303_ops;
-
-struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config,
-				     struct i2c_adapter* i2c)
-{
-	struct lgdt330x_state* state = NULL;
-	u8 buf[1];
-
-	/* Allocate memory for the internal state */
-	state = kzalloc(sizeof(struct lgdt330x_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* Setup the state */
-	state->config = config;
-	state->i2c = i2c;
-
-	/* Create dvb_frontend */
-	switch (config->demod_chip) {
-	case LGDT3302:
-		memcpy(&state->frontend.ops, &lgdt3302_ops, sizeof(struct dvb_frontend_ops));
-		break;
-	case LGDT3303:
-		memcpy(&state->frontend.ops, &lgdt3303_ops, sizeof(struct dvb_frontend_ops));
-		break;
-	default:
-		goto error;
-	}
-	state->frontend.demodulator_priv = state;
-
-	/* Verify communication with demod chip */
-	if (i2c_read_demod_bytes(state, 2, buf, 1))
-		goto error;
-
-	state->current_frequency = -1;
-	state->current_modulation = -1;
-
-	return &state->frontend;
-
-error:
-	kfree(state);
-	dprintk("%s: ERROR\n",__func__);
-	return NULL;
-}
-
-static struct dvb_frontend_ops lgdt3302_ops = {
-	.delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
-	.info = {
-		.name= "LG Electronics LGDT3302 VSB/QAM Frontend",
-		.frequency_min= 54000000,
-		.frequency_max= 858000000,
-		.frequency_stepsize= 62500,
-		.symbol_rate_min    = 5056941,	/* QAM 64 */
-		.symbol_rate_max    = 10762000,	/* VSB 8  */
-		.caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
-	},
-	.init                 = lgdt330x_init,
-	.set_frontend         = lgdt330x_set_parameters,
-	.get_frontend         = lgdt330x_get_frontend,
-	.get_tune_settings    = lgdt330x_get_tune_settings,
-	.read_status          = lgdt3302_read_status,
-	.read_ber             = lgdt330x_read_ber,
-	.read_signal_strength = lgdt330x_read_signal_strength,
-	.read_snr             = lgdt3302_read_snr,
-	.read_ucblocks        = lgdt330x_read_ucblocks,
-	.release              = lgdt330x_release,
-};
-
-static struct dvb_frontend_ops lgdt3303_ops = {
-	.delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
-	.info = {
-		.name= "LG Electronics LGDT3303 VSB/QAM Frontend",
-		.frequency_min= 54000000,
-		.frequency_max= 858000000,
-		.frequency_stepsize= 62500,
-		.symbol_rate_min    = 5056941,	/* QAM 64 */
-		.symbol_rate_max    = 10762000,	/* VSB 8  */
-		.caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
-	},
-	.init                 = lgdt330x_init,
-	.set_frontend         = lgdt330x_set_parameters,
-	.get_frontend         = lgdt330x_get_frontend,
-	.get_tune_settings    = lgdt330x_get_tune_settings,
-	.read_status          = lgdt3303_read_status,
-	.read_ber             = lgdt330x_read_ber,
-	.read_signal_strength = lgdt330x_read_signal_strength,
-	.read_snr             = lgdt3303_read_snr,
-	.read_ucblocks        = lgdt330x_read_ucblocks,
-	.release              = lgdt330x_release,
-};
-
-MODULE_DESCRIPTION("LGDT330X (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver");
-MODULE_AUTHOR("Wilson Michaels");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(lgdt330x_attach);
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/frontends/lgdt330x.h b/drivers/media/dvb/frontends/lgdt330x.h
deleted file mode 100644
index 9012504..0000000
--- a/drivers/media/dvb/frontends/lgdt330x.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- *    Support for LGDT3302 and LGDT3303 - VSB/QAM
- *
- *    Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef LGDT330X_H
-#define LGDT330X_H
-
-#include <linux/dvb/frontend.h>
-
-typedef enum lg_chip_t {
-		UNDEFINED,
-		LGDT3302,
-		LGDT3303
-}lg_chip_type;
-
-struct lgdt330x_config
-{
-	/* The demodulator's i2c address */
-	u8 demod_address;
-
-	/* LG demodulator chip LGDT3302 or LGDT3303 */
-	lg_chip_type demod_chip;
-
-	/* MPEG hardware interface - 0:parallel 1:serial */
-	int serial_mpeg;
-
-	/* PLL interface */
-	int (*pll_rf_set) (struct dvb_frontend* fe, int index);
-
-	/* Need to set device param for start_dma */
-	int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
-
-	/* Flip the polarity of the mpeg data transfer clock using alternate init data
-	 * This option applies ONLY to LGDT3303 - 0:disabled (default) 1:enabled */
-	int clock_polarity_flip;
-};
-
-#if defined(CONFIG_DVB_LGDT330X) || (defined(CONFIG_DVB_LGDT330X_MODULE) && defined(MODULE))
-extern struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config,
-					    struct i2c_adapter* i2c);
-#else
-static inline struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config,
-					    struct i2c_adapter* i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_LGDT330X
-
-#endif /* LGDT330X_H */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/frontends/lgdt330x_priv.h b/drivers/media/dvb/frontends/lgdt330x_priv.h
deleted file mode 100644
index 38c7669..0000000
--- a/drivers/media/dvb/frontends/lgdt330x_priv.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- *    Support for LGDT3302 and LGDT3303 - VSB/QAM
- *
- *    Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _LGDT330X_PRIV_
-#define _LGDT330X_PRIV_
-
-/* i2c control register addresses */
-enum I2C_REG {
-	TOP_CONTROL= 0x00,
-	IRQ_MASK= 0x01,
-	IRQ_STATUS= 0x02,
-	VSB_CARRIER_FREQ0= 0x16,
-	VSB_CARRIER_FREQ1= 0x17,
-	VSB_CARRIER_FREQ2= 0x18,
-	VSB_CARRIER_FREQ3= 0x19,
-	CARRIER_MSEQAM1= 0x1a,
-	CARRIER_MSEQAM2= 0x1b,
-	CARRIER_LOCK= 0x1c,
-	TIMING_RECOVERY= 0x1d,
-	AGC_DELAY0= 0x2a,
-	AGC_DELAY1= 0x2b,
-	AGC_DELAY2= 0x2c,
-	AGC_RF_BANDWIDTH0= 0x2d,
-	AGC_RF_BANDWIDTH1= 0x2e,
-	AGC_RF_BANDWIDTH2= 0x2f,
-	AGC_LOOP_BANDWIDTH0= 0x30,
-	AGC_LOOP_BANDWIDTH1= 0x31,
-	AGC_FUNC_CTRL1= 0x32,
-	AGC_FUNC_CTRL2= 0x33,
-	AGC_FUNC_CTRL3= 0x34,
-	AGC_RFIF_ACC0= 0x39,
-	AGC_RFIF_ACC1= 0x3a,
-	AGC_RFIF_ACC2= 0x3b,
-	AGC_STATUS= 0x3f,
-	SYNC_STATUS_VSB= 0x43,
-	DEMUX_CONTROL= 0x66,
-	LGDT3302_EQPH_ERR0= 0x47,
-	LGDT3302_EQ_ERR1= 0x48,
-	LGDT3302_EQ_ERR2= 0x49,
-	LGDT3302_PH_ERR1= 0x4a,
-	LGDT3302_PH_ERR2= 0x4b,
-	LGDT3302_PACKET_ERR_COUNTER1= 0x6a,
-	LGDT3302_PACKET_ERR_COUNTER2= 0x6b,
-	LGDT3303_EQPH_ERR0= 0x6e,
-	LGDT3303_EQ_ERR1= 0x6f,
-	LGDT3303_EQ_ERR2= 0x70,
-	LGDT3303_PH_ERR1= 0x71,
-	LGDT3303_PH_ERR2= 0x72,
-	LGDT3303_PACKET_ERR_COUNTER1= 0x8b,
-	LGDT3303_PACKET_ERR_COUNTER2= 0x8c,
-};
-
-#endif /* _LGDT330X_PRIV_ */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/frontends/lgs8gl5.c b/drivers/media/dvb/frontends/lgs8gl5.c
deleted file mode 100644
index 2cec804..0000000
--- a/drivers/media/dvb/frontends/lgs8gl5.c
+++ /dev/null
@@ -1,453 +0,0 @@
-/*
-    Legend Silicon LGS-8GL5 DMB-TH OFDM demodulator driver
-
-    Copyright (C) 2008 Sirius International (Hong Kong) Limited
-	Timothy Lee <timothy.lee@siriushk.com>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include "dvb_frontend.h"
-#include "lgs8gl5.h"
-
-
-#define REG_RESET		0x02
-#define REG_RESET_OFF			0x01
-#define REG_03			0x03
-#define REG_04			0x04
-#define REG_07			0x07
-#define REG_09			0x09
-#define REG_0A			0x0a
-#define REG_0B			0x0b
-#define REG_0C			0x0c
-#define REG_37			0x37
-#define REG_STRENGTH		0x4b
-#define REG_STRENGTH_MASK		0x7f
-#define REG_STRENGTH_CARRIER		0x80
-#define REG_INVERSION		0x7c
-#define REG_INVERSION_ON		0x80
-#define REG_7D			0x7d
-#define REG_7E			0x7e
-#define REG_A2			0xa2
-#define REG_STATUS		0xa4
-#define REG_STATUS_SYNC		0x04
-#define REG_STATUS_LOCK		0x01
-
-
-struct lgs8gl5_state {
-	struct i2c_adapter *i2c;
-	const struct lgs8gl5_config *config;
-	struct dvb_frontend frontend;
-};
-
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) \
-			printk(KERN_DEBUG "lgs8gl5: " args); \
-	} while (0)
-
-
-/* Writes into demod's register */
-static int
-lgs8gl5_write_reg(struct lgs8gl5_state *state, u8 reg, u8 data)
-{
-	int ret;
-	u8 buf[] = {reg, data};
-	struct i2c_msg msg = {
-		.addr  = state->config->demod_address,
-		.flags = 0,
-		.buf   = buf,
-		.len   = 2
-	};
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-	if (ret != 1)
-		dprintk("%s: error (reg=0x%02x, val=0x%02x, ret=%i)\n",
-			__func__, reg, data, ret);
-	return (ret != 1) ? -1 : 0;
-}
-
-
-/* Reads from demod's register */
-static int
-lgs8gl5_read_reg(struct lgs8gl5_state *state, u8 reg)
-{
-	int ret;
-	u8 b0[] = {reg};
-	u8 b1[] = {0};
-	struct i2c_msg msg[2] = {
-		{
-			.addr  = state->config->demod_address,
-			.flags = 0,
-			.buf   = b0,
-			.len   = 1
-		},
-		{
-			.addr  = state->config->demod_address,
-			.flags = I2C_M_RD,
-			.buf   = b1,
-			.len   = 1
-		}
-	};
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-	if (ret != 2)
-		return -EIO;
-
-	return b1[0];
-}
-
-
-static int
-lgs8gl5_update_reg(struct lgs8gl5_state *state, u8 reg, u8 data)
-{
-	lgs8gl5_read_reg(state, reg);
-	lgs8gl5_write_reg(state, reg, data);
-	return 0;
-}
-
-
-/* Writes into alternate device's register */
-/* TODO:  Find out what that device is for! */
-static int
-lgs8gl5_update_alt_reg(struct lgs8gl5_state *state, u8 reg, u8 data)
-{
-	int ret;
-	u8 b0[] = {reg};
-	u8 b1[] = {0};
-	u8 b2[] = {reg, data};
-	struct i2c_msg msg[3] = {
-		{
-			.addr  = state->config->demod_address + 2,
-			.flags = 0,
-			.buf   = b0,
-			.len   = 1
-		},
-		{
-			.addr  = state->config->demod_address + 2,
-			.flags = I2C_M_RD,
-			.buf   = b1,
-			.len   = 1
-		},
-		{
-			.addr  = state->config->demod_address + 2,
-			.flags = 0,
-			.buf   = b2,
-			.len   = 2
-		},
-	};
-
-	ret = i2c_transfer(state->i2c, msg, 3);
-	return (ret != 3) ? -1 : 0;
-}
-
-
-static void
-lgs8gl5_soft_reset(struct lgs8gl5_state *state)
-{
-	u8 val;
-
-	dprintk("%s\n", __func__);
-
-	val = lgs8gl5_read_reg(state, REG_RESET);
-	lgs8gl5_write_reg(state, REG_RESET, val & ~REG_RESET_OFF);
-	lgs8gl5_write_reg(state, REG_RESET, val | REG_RESET_OFF);
-	msleep(5);
-}
-
-
-/* Starts demodulation */
-static void
-lgs8gl5_start_demod(struct lgs8gl5_state *state)
-{
-	u8  val;
-	int n;
-
-	dprintk("%s\n", __func__);
-
-	lgs8gl5_update_alt_reg(state, 0xc2, 0x28);
-	lgs8gl5_soft_reset(state);
-	lgs8gl5_update_reg(state, REG_07, 0x10);
-	lgs8gl5_update_reg(state, REG_07, 0x10);
-	lgs8gl5_write_reg(state, REG_09, 0x0e);
-	lgs8gl5_write_reg(state, REG_0A, 0xe5);
-	lgs8gl5_write_reg(state, REG_0B, 0x35);
-	lgs8gl5_write_reg(state, REG_0C, 0x30);
-
-	lgs8gl5_update_reg(state, REG_03, 0x00);
-	lgs8gl5_update_reg(state, REG_7E, 0x01);
-	lgs8gl5_update_alt_reg(state, 0xc5, 0x00);
-	lgs8gl5_update_reg(state, REG_04, 0x02);
-	lgs8gl5_update_reg(state, REG_37, 0x01);
-	lgs8gl5_soft_reset(state);
-
-	/* Wait for carrier */
-	for (n = 0;  n < 10;  n++) {
-		val = lgs8gl5_read_reg(state, REG_STRENGTH);
-		dprintk("Wait for carrier[%d] 0x%02X\n", n, val);
-		if (val & REG_STRENGTH_CARRIER)
-			break;
-		msleep(4);
-	}
-	if (!(val & REG_STRENGTH_CARRIER))
-		return;
-
-	/* Wait for lock */
-	for (n = 0;  n < 20;  n++) {
-		val = lgs8gl5_read_reg(state, REG_STATUS);
-		dprintk("Wait for lock[%d] 0x%02X\n", n, val);
-		if (val & REG_STATUS_LOCK)
-			break;
-		msleep(12);
-	}
-	if (!(val & REG_STATUS_LOCK))
-		return;
-
-	lgs8gl5_write_reg(state, REG_7D, lgs8gl5_read_reg(state, REG_A2));
-	lgs8gl5_soft_reset(state);
-}
-
-
-static int
-lgs8gl5_init(struct dvb_frontend *fe)
-{
-	struct lgs8gl5_state *state = fe->demodulator_priv;
-
-	dprintk("%s\n", __func__);
-
-	lgs8gl5_update_alt_reg(state, 0xc2, 0x28);
-	lgs8gl5_soft_reset(state);
-	lgs8gl5_update_reg(state, REG_07, 0x10);
-	lgs8gl5_update_reg(state, REG_07, 0x10);
-	lgs8gl5_write_reg(state, REG_09, 0x0e);
-	lgs8gl5_write_reg(state, REG_0A, 0xe5);
-	lgs8gl5_write_reg(state, REG_0B, 0x35);
-	lgs8gl5_write_reg(state, REG_0C, 0x30);
-
-	return 0;
-}
-
-
-static int
-lgs8gl5_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct lgs8gl5_state *state = fe->demodulator_priv;
-	u8 level = lgs8gl5_read_reg(state, REG_STRENGTH);
-	u8 flags = lgs8gl5_read_reg(state, REG_STATUS);
-
-	*status = 0;
-
-	if ((level & REG_STRENGTH_MASK) > 0)
-		*status |= FE_HAS_SIGNAL;
-	if (level & REG_STRENGTH_CARRIER)
-		*status |= FE_HAS_CARRIER;
-	if (flags & REG_STATUS_SYNC)
-		*status |= FE_HAS_SYNC;
-	if (flags & REG_STATUS_LOCK)
-		*status |= FE_HAS_LOCK;
-
-	return 0;
-}
-
-
-static int
-lgs8gl5_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	*ber = 0;
-
-	return 0;
-}
-
-
-static int
-lgs8gl5_read_signal_strength(struct dvb_frontend *fe, u16 *signal_strength)
-{
-	struct lgs8gl5_state *state = fe->demodulator_priv;
-	u8 level = lgs8gl5_read_reg(state, REG_STRENGTH);
-	*signal_strength = (level & REG_STRENGTH_MASK) << 8;
-
-	return 0;
-}
-
-
-static int
-lgs8gl5_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct lgs8gl5_state *state = fe->demodulator_priv;
-	u8 level = lgs8gl5_read_reg(state, REG_STRENGTH);
-	*snr = (level & REG_STRENGTH_MASK) << 8;
-
-	return 0;
-}
-
-
-static int
-lgs8gl5_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	*ucblocks = 0;
-
-	return 0;
-}
-
-
-static int
-lgs8gl5_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct lgs8gl5_state *state = fe->demodulator_priv;
-
-	dprintk("%s\n", __func__);
-
-	if (p->bandwidth_hz != 8000000)
-		return -EINVAL;
-
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	/* lgs8gl5_set_inversion(state, p->inversion); */
-
-	lgs8gl5_start_demod(state);
-
-	return 0;
-}
-
-
-static int
-lgs8gl5_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct lgs8gl5_state *state = fe->demodulator_priv;
-	u8 inv = lgs8gl5_read_reg(state, REG_INVERSION);
-
-	p->inversion = (inv & REG_INVERSION_ON) ? INVERSION_ON : INVERSION_OFF;
-
-	p->code_rate_HP = FEC_1_2;
-	p->code_rate_LP = FEC_7_8;
-	p->guard_interval = GUARD_INTERVAL_1_32;
-	p->transmission_mode = TRANSMISSION_MODE_2K;
-	p->modulation = QAM_64;
-	p->hierarchy = HIERARCHY_NONE;
-	p->bandwidth_hz = 8000000;
-
-	return 0;
-}
-
-
-static int
-lgs8gl5_get_tune_settings(struct dvb_frontend *fe,
-		struct dvb_frontend_tune_settings *fesettings)
-{
-	fesettings->min_delay_ms = 240;
-	fesettings->step_size    = 0;
-	fesettings->max_drift    = 0;
-	return 0;
-}
-
-
-static void
-lgs8gl5_release(struct dvb_frontend *fe)
-{
-	struct lgs8gl5_state *state = fe->demodulator_priv;
-	kfree(state);
-}
-
-
-static struct dvb_frontend_ops lgs8gl5_ops;
-
-
-struct dvb_frontend*
-lgs8gl5_attach(const struct lgs8gl5_config *config, struct i2c_adapter *i2c)
-{
-	struct lgs8gl5_state *state = NULL;
-
-	dprintk("%s\n", __func__);
-
-	/* Allocate memory for the internal state */
-	state = kzalloc(sizeof(struct lgs8gl5_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* Setup the state */
-	state->config = config;
-	state->i2c    = i2c;
-
-	/* Check if the demod is there */
-	if (lgs8gl5_read_reg(state, REG_RESET) < 0)
-		goto error;
-
-	/* Create dvb_frontend */
-	memcpy(&state->frontend.ops, &lgs8gl5_ops,
-		sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(lgs8gl5_attach);
-
-
-static struct dvb_frontend_ops lgs8gl5_ops = {
-	.delsys = { SYS_DMBTH },
-	.info = {
-		.name			= "Legend Silicon LGS-8GL5 DMB-TH",
-		.frequency_min		= 474000000,
-		.frequency_max		= 858000000,
-		.frequency_stepsize	= 10000,
-		.frequency_tolerance	= 0,
-		.caps = FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_32 |
-			FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO |
-			FE_CAN_BANDWIDTH_AUTO |
-			FE_CAN_GUARD_INTERVAL_AUTO |
-			FE_CAN_HIERARCHY_AUTO |
-			FE_CAN_RECOVER
-	},
-
-	.release = lgs8gl5_release,
-
-	.init = lgs8gl5_init,
-
-	.set_frontend = lgs8gl5_set_frontend,
-	.get_frontend = lgs8gl5_get_frontend,
-	.get_tune_settings = lgs8gl5_get_tune_settings,
-
-	.read_status = lgs8gl5_read_status,
-	.read_ber = lgs8gl5_read_ber,
-	.read_signal_strength = lgs8gl5_read_signal_strength,
-	.read_snr = lgs8gl5_read_snr,
-	.read_ucblocks = lgs8gl5_read_ucblocks,
-};
-
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("Legend Silicon LGS-8GL5 DMB-TH Demodulator driver");
-MODULE_AUTHOR("Timothy Lee");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/lgs8gl5.h b/drivers/media/dvb/frontends/lgs8gl5.h
deleted file mode 100644
index d1417678..0000000
--- a/drivers/media/dvb/frontends/lgs8gl5.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
-    Legend Silicon LGS-8GL5 DMB-TH OFDM demodulator driver
-
-    Copyright (C) 2008 Sirius International (Hong Kong) Limited
-	Timothy Lee <timothy.lee@siriushk.com>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef LGS8GL5_H
-#define LGS8GL5_H
-
-#include <linux/dvb/frontend.h>
-
-struct lgs8gl5_config {
-	/* the demodulator's i2c address */
-	u8 demod_address;
-};
-
-#if defined(CONFIG_DVB_LGS8GL5) || \
-	(defined(CONFIG_DVB_LGS8GL5_MODULE) && defined(MODULE))
-extern struct dvb_frontend *lgs8gl5_attach(
-	const struct lgs8gl5_config *config, struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *lgs8gl5_attach(
-	const struct lgs8gl5_config *config, struct i2c_adapter *i2c) {
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_LGS8GL5 */
-
-#endif /* LGS8GL5_H */
diff --git a/drivers/media/dvb/frontends/lgs8gxx.c b/drivers/media/dvb/frontends/lgs8gxx.c
deleted file mode 100644
index c2ea274..0000000
--- a/drivers/media/dvb/frontends/lgs8gxx.c
+++ /dev/null
@@ -1,1075 +0,0 @@
-/*
- *    Support for Legend Silicon GB20600 (a.k.a DMB-TH) demodulator
- *    LGS8913, LGS8GL5, LGS8G75
- *    experimental support LGS8G42, LGS8G52
- *
- *    Copyright (C) 2007-2009 David T.L. Wong <davidtlwong@gmail.com>
- *    Copyright (C) 2008 Sirius International (Hong Kong) Limited
- *    Timothy Lee <timothy.lee@siriushk.com> (for initial work on LGS8GL5)
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <asm/div64.h>
-#include <linux/firmware.h>
-
-#include "dvb_frontend.h"
-
-#include "lgs8gxx.h"
-#include "lgs8gxx_priv.h"
-
-#define dprintk(args...) \
-	do { \
-		if (debug) \
-			printk(KERN_DEBUG "lgs8gxx: " args); \
-	} while (0)
-
-static int debug;
-static int fake_signal_str = 1;
-
-#define LGS8GXX_FIRMWARE "lgs8g75.fw"
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-module_param(fake_signal_str, int, 0644);
-MODULE_PARM_DESC(fake_signal_str, "fake signal strength for LGS8913."
-"Signal strength calculation is slow.(default:on).");
-
-/* LGS8GXX internal helper functions */
-
-static int lgs8gxx_write_reg(struct lgs8gxx_state *priv, u8 reg, u8 data)
-{
-	int ret;
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg = { .flags = 0, .buf = buf, .len = 2 };
-
-	msg.addr = priv->config->demod_address;
-	if (priv->config->prod != LGS8GXX_PROD_LGS8G75 && reg >= 0xC0)
-		msg.addr += 0x02;
-
-	if (debug >= 2)
-		dprintk("%s: reg=0x%02X, data=0x%02X\n", __func__, reg, data);
-
-	ret = i2c_transfer(priv->i2c, &msg, 1);
-
-	if (ret != 1)
-		dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n",
-			__func__, reg, data, ret);
-
-	return (ret != 1) ? -1 : 0;
-}
-
-static int lgs8gxx_read_reg(struct lgs8gxx_state *priv, u8 reg, u8 *p_data)
-{
-	int ret;
-	u8 dev_addr;
-
-	u8 b0[] = { reg };
-	u8 b1[] = { 0 };
-	struct i2c_msg msg[] = {
-		{ .flags = 0, .buf = b0, .len = 1 },
-		{ .flags = I2C_M_RD, .buf = b1, .len = 1 },
-	};
-
-	dev_addr = priv->config->demod_address;
-	if (priv->config->prod != LGS8GXX_PROD_LGS8G75 && reg >= 0xC0)
-		dev_addr += 0x02;
-	msg[1].addr =  msg[0].addr = dev_addr;
-
-	ret = i2c_transfer(priv->i2c, msg, 2);
-	if (ret != 2) {
-		dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg, ret);
-		return -1;
-	}
-
-	*p_data = b1[0];
-	if (debug >= 2)
-		dprintk("%s: reg=0x%02X, data=0x%02X\n", __func__, reg, b1[0]);
-	return 0;
-}
-
-static int lgs8gxx_soft_reset(struct lgs8gxx_state *priv)
-{
-	lgs8gxx_write_reg(priv, 0x02, 0x00);
-	msleep(1);
-	lgs8gxx_write_reg(priv, 0x02, 0x01);
-	msleep(100);
-
-	return 0;
-}
-
-static int wait_reg_mask(struct lgs8gxx_state *priv, u8 reg, u8 mask,
-	u8 val, u8 delay, u8 tries)
-{
-	u8 t;
-	int i;
-
-	for (i = 0; i < tries; i++) {
-		lgs8gxx_read_reg(priv, reg, &t);
-
-		if ((t & mask) == val)
-			return 0;
-		msleep(delay);
-	}
-
-	return 1;
-}
-
-static int lgs8gxx_set_ad_mode(struct lgs8gxx_state *priv)
-{
-	const struct lgs8gxx_config *config = priv->config;
-	u8 if_conf;
-
-	if_conf = 0x10; /* AGC output on, RF_AGC output off; */
-
-	if_conf |=
-		((config->ext_adc) ? 0x80 : 0x00) |
-		((config->if_neg_center) ? 0x04 : 0x00) |
-		((config->if_freq == 0) ? 0x08 : 0x00) | /* Baseband */
-		((config->adc_signed) ? 0x02 : 0x00) |
-		((config->if_neg_edge) ? 0x01 : 0x00);
-
-	if (config->ext_adc &&
-		(config->prod == LGS8GXX_PROD_LGS8G52)) {
-		lgs8gxx_write_reg(priv, 0xBA, 0x40);
-	}
-
-	lgs8gxx_write_reg(priv, 0x07, if_conf);
-
-	return 0;
-}
-
-static int lgs8gxx_set_if_freq(struct lgs8gxx_state *priv, u32 freq /*in kHz*/)
-{
-	u64 val;
-	u32 v32;
-	u32 if_clk;
-
-	if_clk = priv->config->if_clk_freq;
-
-	val = freq;
-	if (freq != 0) {
-		val <<= 32;
-		if (if_clk != 0)
-			do_div(val, if_clk);
-		v32 = val & 0xFFFFFFFF;
-		dprintk("Set IF Freq to %dkHz\n", freq);
-	} else {
-		v32 = 0;
-		dprintk("Set IF Freq to baseband\n");
-	}
-	dprintk("AFC_INIT_FREQ = 0x%08X\n", v32);
-
-	if (priv->config->prod == LGS8GXX_PROD_LGS8G75) {
-		lgs8gxx_write_reg(priv, 0x08, 0xFF & (v32));
-		lgs8gxx_write_reg(priv, 0x09, 0xFF & (v32 >> 8));
-		lgs8gxx_write_reg(priv, 0x0A, 0xFF & (v32 >> 16));
-		lgs8gxx_write_reg(priv, 0x0B, 0xFF & (v32 >> 24));
-	} else {
-		lgs8gxx_write_reg(priv, 0x09, 0xFF & (v32));
-		lgs8gxx_write_reg(priv, 0x0A, 0xFF & (v32 >> 8));
-		lgs8gxx_write_reg(priv, 0x0B, 0xFF & (v32 >> 16));
-		lgs8gxx_write_reg(priv, 0x0C, 0xFF & (v32 >> 24));
-	}
-
-	return 0;
-}
-
-static int lgs8gxx_get_afc_phase(struct lgs8gxx_state *priv)
-{
-	u64 val;
-	u32 v32 = 0;
-	u8 reg_addr, t;
-	int i;
-
-	if (priv->config->prod == LGS8GXX_PROD_LGS8G75)
-		reg_addr = 0x23;
-	else
-		reg_addr = 0x48;
-
-	for (i = 0; i < 4; i++) {
-		lgs8gxx_read_reg(priv, reg_addr, &t);
-		v32 <<= 8;
-		v32 |= t;
-		reg_addr--;
-	}
-
-	val = v32;
-	val *= priv->config->if_clk_freq;
-	val >>= 32;
-	dprintk("AFC = %u kHz\n", (u32)val);
-	return 0;
-}
-
-static int lgs8gxx_set_mode_auto(struct lgs8gxx_state *priv)
-{
-	u8 t;
-	u8 prod = priv->config->prod;
-
-	if (prod == LGS8GXX_PROD_LGS8913)
-		lgs8gxx_write_reg(priv, 0xC6, 0x01);
-
-	if (prod == LGS8GXX_PROD_LGS8G75) {
-		lgs8gxx_read_reg(priv, 0x0C, &t);
-		t &= (~0x04);
-		lgs8gxx_write_reg(priv, 0x0C, t | 0x80);
-		lgs8gxx_write_reg(priv, 0x39, 0x00);
-		lgs8gxx_write_reg(priv, 0x3D, 0x04);
-	} else if (prod == LGS8GXX_PROD_LGS8913 ||
-		prod == LGS8GXX_PROD_LGS8GL5 ||
-		prod == LGS8GXX_PROD_LGS8G42 ||
-		prod == LGS8GXX_PROD_LGS8G52 ||
-		prod == LGS8GXX_PROD_LGS8G54) {
-		lgs8gxx_read_reg(priv, 0x7E, &t);
-		lgs8gxx_write_reg(priv, 0x7E, t | 0x01);
-
-		/* clear FEC self reset */
-		lgs8gxx_read_reg(priv, 0xC5, &t);
-		lgs8gxx_write_reg(priv, 0xC5, t & 0xE0);
-	}
-
-	if (prod == LGS8GXX_PROD_LGS8913) {
-		/* FEC auto detect */
-		lgs8gxx_write_reg(priv, 0xC1, 0x03);
-
-		lgs8gxx_read_reg(priv, 0x7C, &t);
-		t = (t & 0x8C) | 0x03;
-		lgs8gxx_write_reg(priv, 0x7C, t);
-
-		/* BER test mode */
-		lgs8gxx_read_reg(priv, 0xC3, &t);
-		t = (t & 0xEF) |  0x10;
-		lgs8gxx_write_reg(priv, 0xC3, t);
-	}
-
-	if (priv->config->prod == LGS8GXX_PROD_LGS8G52)
-		lgs8gxx_write_reg(priv, 0xD9, 0x40);
-
-	return 0;
-}
-
-static int lgs8gxx_set_mode_manual(struct lgs8gxx_state *priv)
-{
-	u8 t;
-
-	if (priv->config->prod == LGS8GXX_PROD_LGS8G75) {
-		u8 t2;
-		lgs8gxx_read_reg(priv, 0x0C, &t);
-		t &= (~0x80);
-		lgs8gxx_write_reg(priv, 0x0C, t);
-
-		lgs8gxx_read_reg(priv, 0x0C, &t);
-		lgs8gxx_read_reg(priv, 0x19, &t2);
-
-		if (((t&0x03) == 0x01) && (t2&0x01)) {
-			lgs8gxx_write_reg(priv, 0x6E, 0x05);
-			lgs8gxx_write_reg(priv, 0x39, 0x02);
-			lgs8gxx_write_reg(priv, 0x39, 0x03);
-			lgs8gxx_write_reg(priv, 0x3D, 0x05);
-			lgs8gxx_write_reg(priv, 0x3E, 0x28);
-			lgs8gxx_write_reg(priv, 0x53, 0x80);
-		} else {
-			lgs8gxx_write_reg(priv, 0x6E, 0x3F);
-			lgs8gxx_write_reg(priv, 0x39, 0x00);
-			lgs8gxx_write_reg(priv, 0x3D, 0x04);
-		}
-
-		lgs8gxx_soft_reset(priv);
-		return 0;
-	}
-
-	/* turn off auto-detect; manual settings */
-	lgs8gxx_write_reg(priv, 0x7E, 0);
-	if (priv->config->prod == LGS8GXX_PROD_LGS8913)
-		lgs8gxx_write_reg(priv, 0xC1, 0);
-
-	lgs8gxx_read_reg(priv, 0xC5, &t);
-	t = (t & 0xE0) | 0x06;
-	lgs8gxx_write_reg(priv, 0xC5, t);
-
-	lgs8gxx_soft_reset(priv);
-
-	return 0;
-}
-
-static int lgs8gxx_is_locked(struct lgs8gxx_state *priv, u8 *locked)
-{
-	int ret = 0;
-	u8 t;
-
-	if (priv->config->prod == LGS8GXX_PROD_LGS8G75)
-		ret = lgs8gxx_read_reg(priv, 0x13, &t);
-	else
-		ret = lgs8gxx_read_reg(priv, 0x4B, &t);
-	if (ret != 0)
-		return ret;
-
-	if (priv->config->prod == LGS8GXX_PROD_LGS8G75)
-		*locked = ((t & 0x80) == 0x80) ? 1 : 0;
-	else
-		*locked = ((t & 0xC0) == 0xC0) ? 1 : 0;
-	return 0;
-}
-
-/* Wait for Code Acquisition Lock */
-static int lgs8gxx_wait_ca_lock(struct lgs8gxx_state *priv, u8 *locked)
-{
-	int ret = 0;
-	u8 reg, mask, val;
-
-	if (priv->config->prod == LGS8GXX_PROD_LGS8G75) {
-		reg = 0x13;
-		mask = 0x80;
-		val = 0x80;
-	} else {
-		reg = 0x4B;
-		mask = 0xC0;
-		val = 0xC0;
-	}
-
-	ret = wait_reg_mask(priv, reg, mask, val, 50, 40);
-	*locked = (ret == 0) ? 1 : 0;
-
-	return 0;
-}
-
-static int lgs8gxx_is_autodetect_finished(struct lgs8gxx_state *priv,
-					  u8 *finished)
-{
-	int ret = 0;
-	u8 reg, mask, val;
-
-	if (priv->config->prod == LGS8GXX_PROD_LGS8G75) {
-		reg = 0x1f;
-		mask = 0xC0;
-		val = 0x80;
-	} else {
-		reg = 0xA4;
-		mask = 0x03;
-		val = 0x01;
-	}
-
-	ret = wait_reg_mask(priv, reg, mask, val, 10, 20);
-	*finished = (ret == 0) ? 1 : 0;
-
-	return 0;
-}
-
-static int lgs8gxx_autolock_gi(struct lgs8gxx_state *priv, u8 gi, u8 cpn,
-	u8 *locked)
-{
-	int err = 0;
-	u8 ad_fini = 0;
-	u8 t1, t2;
-
-	if (gi == GI_945)
-		dprintk("try GI 945\n");
-	else if (gi == GI_595)
-		dprintk("try GI 595\n");
-	else if (gi == GI_420)
-		dprintk("try GI 420\n");
-	if (priv->config->prod == LGS8GXX_PROD_LGS8G75) {
-		lgs8gxx_read_reg(priv, 0x0C, &t1);
-		lgs8gxx_read_reg(priv, 0x18, &t2);
-		t1 &= ~(GI_MASK);
-		t1 |= gi;
-		t2 &= 0xFE;
-		t2 |= cpn ? 0x01 : 0x00;
-		lgs8gxx_write_reg(priv, 0x0C, t1);
-		lgs8gxx_write_reg(priv, 0x18, t2);
-	} else {
-		lgs8gxx_write_reg(priv, 0x04, gi);
-	}
-	lgs8gxx_soft_reset(priv);
-	err = lgs8gxx_wait_ca_lock(priv, locked);
-	if (err || !(*locked))
-		return err;
-	err = lgs8gxx_is_autodetect_finished(priv, &ad_fini);
-	if (err != 0)
-		return err;
-	if (ad_fini) {
-		dprintk("auto detect finished\n");
-	} else
-		*locked = 0;
-
-	return 0;
-}
-
-static int lgs8gxx_auto_detect(struct lgs8gxx_state *priv,
-			       u8 *detected_param, u8 *gi)
-{
-	int i, j;
-	int err = 0;
-	u8 locked = 0, tmp_gi;
-
-	dprintk("%s\n", __func__);
-
-	lgs8gxx_set_mode_auto(priv);
-	if (priv->config->prod == LGS8GXX_PROD_LGS8G75) {
-		lgs8gxx_write_reg(priv, 0x67, 0xAA);
-		lgs8gxx_write_reg(priv, 0x6E, 0x3F);
-	} else {
-		/* Guard Interval */
-		lgs8gxx_write_reg(priv, 0x03, 00);
-	}
-
-	for (i = 0; i < 2; i++) {
-		for (j = 0; j < 2; j++) {
-			tmp_gi = GI_945;
-			err = lgs8gxx_autolock_gi(priv, GI_945, j, &locked);
-			if (err)
-				goto out;
-			if (locked)
-				goto locked;
-		}
-		for (j = 0; j < 2; j++) {
-			tmp_gi = GI_420;
-			err = lgs8gxx_autolock_gi(priv, GI_420, j, &locked);
-			if (err)
-				goto out;
-			if (locked)
-				goto locked;
-		}
-		tmp_gi = GI_595;
-		err = lgs8gxx_autolock_gi(priv, GI_595, 1, &locked);
-		if (err)
-			goto out;
-		if (locked)
-			goto locked;
-	}
-
-locked:
-	if ((err == 0) && (locked == 1)) {
-		u8 t;
-
-		if (priv->config->prod != LGS8GXX_PROD_LGS8G75) {
-			lgs8gxx_read_reg(priv, 0xA2, &t);
-			*detected_param = t;
-		} else {
-			lgs8gxx_read_reg(priv, 0x1F, &t);
-			*detected_param = t & 0x3F;
-		}
-
-		if (tmp_gi == GI_945)
-			dprintk("GI 945 locked\n");
-		else if (tmp_gi == GI_595)
-			dprintk("GI 595 locked\n");
-		else if (tmp_gi == GI_420)
-			dprintk("GI 420 locked\n");
-		*gi = tmp_gi;
-	}
-	if (!locked)
-		err = -1;
-
-out:
-	return err;
-}
-
-static void lgs8gxx_auto_lock(struct lgs8gxx_state *priv)
-{
-	s8 err;
-	u8 gi = 0x2;
-	u8 detected_param = 0;
-
-	err = lgs8gxx_auto_detect(priv, &detected_param, &gi);
-
-	if (err != 0) {
-		dprintk("lgs8gxx_auto_detect failed\n");
-	} else
-		dprintk("detected param = 0x%02X\n", detected_param);
-
-	/* Apply detected parameters */
-	if (priv->config->prod == LGS8GXX_PROD_LGS8913) {
-		u8 inter_leave_len = detected_param & TIM_MASK ;
-		/* Fix 8913 time interleaver detection bug */
-		inter_leave_len = (inter_leave_len == TIM_MIDDLE) ? 0x60 : 0x40;
-		detected_param &= CF_MASK | SC_MASK  | LGS_FEC_MASK;
-		detected_param |= inter_leave_len;
-	}
-	if (priv->config->prod == LGS8GXX_PROD_LGS8G75) {
-		u8 t;
-		lgs8gxx_read_reg(priv, 0x19, &t);
-		t &= 0x81;
-		t |= detected_param << 1;
-		lgs8gxx_write_reg(priv, 0x19, t);
-	} else {
-		lgs8gxx_write_reg(priv, 0x7D, detected_param);
-		if (priv->config->prod == LGS8GXX_PROD_LGS8913)
-			lgs8gxx_write_reg(priv, 0xC0, detected_param);
-	}
-	/* lgs8gxx_soft_reset(priv); */
-
-	/* Enter manual mode */
-	lgs8gxx_set_mode_manual(priv);
-
-	switch (gi) {
-	case GI_945:
-		priv->curr_gi = 945; break;
-	case GI_595:
-		priv->curr_gi = 595; break;
-	case GI_420:
-		priv->curr_gi = 420; break;
-	default:
-		priv->curr_gi = 945; break;
-	}
-}
-
-static int lgs8gxx_set_mpeg_mode(struct lgs8gxx_state *priv,
-	u8 serial, u8 clk_pol, u8 clk_gated)
-{
-	int ret = 0;
-	u8 t, reg_addr;
-
-	reg_addr = (priv->config->prod == LGS8GXX_PROD_LGS8G75) ? 0x30 : 0xC2;
-	ret = lgs8gxx_read_reg(priv, reg_addr, &t);
-	if (ret != 0)
-		return ret;
-
-	t &= 0xF8;
-	t |= serial ? TS_SERIAL : TS_PARALLEL;
-	t |= clk_pol ? TS_CLK_INVERTED : TS_CLK_NORMAL;
-	t |= clk_gated ? TS_CLK_GATED : TS_CLK_FREERUN;
-
-	ret = lgs8gxx_write_reg(priv, reg_addr, t);
-	if (ret != 0)
-		return ret;
-
-	return 0;
-}
-
-/* A/D input peak-to-peak voltage range */
-static int lgs8g75_set_adc_vpp(struct lgs8gxx_state *priv,
-	u8 sel)
-{
-	u8 r26 = 0x73, r27 = 0x90;
-
-	if (priv->config->prod != LGS8GXX_PROD_LGS8G75)
-		return 0;
-
-	r26 |= (sel & 0x01) << 7;
-	r27 |= (sel & 0x02) >> 1;
-	lgs8gxx_write_reg(priv, 0x26, r26);
-	lgs8gxx_write_reg(priv, 0x27, r27);
-
-	return 0;
-}
-
-/* LGS8913 demod frontend functions */
-
-static int lgs8913_init(struct lgs8gxx_state *priv)
-{
-	u8 t;
-
-	/* LGS8913 specific */
-	lgs8gxx_write_reg(priv, 0xc1, 0x3);
-
-	lgs8gxx_read_reg(priv, 0x7c, &t);
-	lgs8gxx_write_reg(priv, 0x7c, (t&0x8c) | 0x3);
-
-	/* LGS8913 specific */
-	lgs8gxx_read_reg(priv, 0xc3, &t);
-	lgs8gxx_write_reg(priv, 0xc3, t&0x10);
-
-
-	return 0;
-}
-
-static int lgs8g75_init_data(struct lgs8gxx_state *priv)
-{
-	const struct firmware *fw;
-	int rc;
-	int i;
-
-	rc = request_firmware(&fw, LGS8GXX_FIRMWARE, &priv->i2c->dev);
-	if (rc)
-		return rc;
-
-	lgs8gxx_write_reg(priv, 0xC6, 0x40);
-
-	lgs8gxx_write_reg(priv, 0x3D, 0x04);
-	lgs8gxx_write_reg(priv, 0x39, 0x00);
-
-	lgs8gxx_write_reg(priv, 0x3A, 0x00);
-	lgs8gxx_write_reg(priv, 0x38, 0x00);
-	lgs8gxx_write_reg(priv, 0x3B, 0x00);
-	lgs8gxx_write_reg(priv, 0x38, 0x00);
-
-	for (i = 0; i < fw->size; i++) {
-		lgs8gxx_write_reg(priv, 0x38, 0x00);
-		lgs8gxx_write_reg(priv, 0x3A, (u8)(i&0xff));
-		lgs8gxx_write_reg(priv, 0x3B, (u8)(i>>8));
-		lgs8gxx_write_reg(priv, 0x3C, fw->data[i]);
-	}
-
-	lgs8gxx_write_reg(priv, 0x38, 0x00);
-
-	release_firmware(fw);
-	return 0;
-}
-
-static int lgs8gxx_init(struct dvb_frontend *fe)
-{
-	struct lgs8gxx_state *priv =
-		(struct lgs8gxx_state *)fe->demodulator_priv;
-	const struct lgs8gxx_config *config = priv->config;
-	u8 data = 0;
-	s8 err;
-	dprintk("%s\n", __func__);
-
-	lgs8gxx_read_reg(priv, 0, &data);
-	dprintk("reg 0 = 0x%02X\n", data);
-
-	if (config->prod == LGS8GXX_PROD_LGS8G75)
-		lgs8g75_set_adc_vpp(priv, config->adc_vpp);
-
-	/* Setup MPEG output format */
-	err = lgs8gxx_set_mpeg_mode(priv, config->serial_ts,
-				    config->ts_clk_pol,
-				    config->ts_clk_gated);
-	if (err != 0)
-		return -EIO;
-
-	if (config->prod == LGS8GXX_PROD_LGS8913)
-		lgs8913_init(priv);
-	lgs8gxx_set_if_freq(priv, priv->config->if_freq);
-	lgs8gxx_set_ad_mode(priv);
-
-	return 0;
-}
-
-static void lgs8gxx_release(struct dvb_frontend *fe)
-{
-	struct lgs8gxx_state *state = fe->demodulator_priv;
-	dprintk("%s\n", __func__);
-
-	kfree(state);
-}
-
-
-static int lgs8gxx_write(struct dvb_frontend *fe, const u8 buf[], int len)
-{
-	struct lgs8gxx_state *priv = fe->demodulator_priv;
-
-	if (len != 2)
-		return -EINVAL;
-
-	return lgs8gxx_write_reg(priv, buf[0], buf[1]);
-}
-
-static int lgs8gxx_set_fe(struct dvb_frontend *fe)
-{
-
-	struct lgs8gxx_state *priv = fe->demodulator_priv;
-
-	dprintk("%s\n", __func__);
-
-	/* set frequency */
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	/* start auto lock */
-	lgs8gxx_auto_lock(priv);
-
-	msleep(10);
-
-	return 0;
-}
-
-static int lgs8gxx_get_fe(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *fe_params = &fe->dtv_property_cache;
-	dprintk("%s\n", __func__);
-
-	/* TODO: get real readings from device */
-	/* inversion status */
-	fe_params->inversion = INVERSION_OFF;
-
-	/* bandwidth */
-	fe_params->bandwidth_hz = 8000000;
-
-	fe_params->code_rate_HP = FEC_AUTO;
-	fe_params->code_rate_LP = FEC_AUTO;
-
-	fe_params->modulation = QAM_AUTO;
-
-	/* transmission mode */
-	fe_params->transmission_mode = TRANSMISSION_MODE_AUTO;
-
-	/* guard interval */
-	fe_params->guard_interval = GUARD_INTERVAL_AUTO;
-
-	/* hierarchy */
-	fe_params->hierarchy = HIERARCHY_NONE;
-
-	return 0;
-}
-
-static
-int lgs8gxx_get_tune_settings(struct dvb_frontend *fe,
-			      struct dvb_frontend_tune_settings *fesettings)
-{
-	/* FIXME: copy from tda1004x.c */
-	fesettings->min_delay_ms = 800;
-	fesettings->step_size = 0;
-	fesettings->max_drift = 0;
-	return 0;
-}
-
-static int lgs8gxx_read_status(struct dvb_frontend *fe, fe_status_t *fe_status)
-{
-	struct lgs8gxx_state *priv = fe->demodulator_priv;
-	s8 ret;
-	u8 t, locked = 0;
-
-	dprintk("%s\n", __func__);
-	*fe_status = 0;
-
-	lgs8gxx_get_afc_phase(priv);
-	lgs8gxx_is_locked(priv, &locked);
-	if (priv->config->prod == LGS8GXX_PROD_LGS8G75) {
-		if (locked)
-			*fe_status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
-				FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
-		return 0;
-	}
-
-	ret = lgs8gxx_read_reg(priv, 0x4B, &t);
-	if (ret != 0)
-		return -EIO;
-
-	dprintk("Reg 0x4B: 0x%02X\n", t);
-
-	*fe_status = 0;
-	if (priv->config->prod == LGS8GXX_PROD_LGS8913) {
-		if ((t & 0x40) == 0x40)
-			*fe_status |= FE_HAS_SIGNAL | FE_HAS_CARRIER;
-		if ((t & 0x80) == 0x80)
-			*fe_status |= FE_HAS_VITERBI | FE_HAS_SYNC |
-				FE_HAS_LOCK;
-	} else {
-		if ((t & 0x80) == 0x80)
-			*fe_status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
-				FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
-	}
-
-	/* success */
-	dprintk("%s: fe_status=0x%x\n", __func__, *fe_status);
-	return 0;
-}
-
-static int lgs8gxx_read_signal_agc(struct lgs8gxx_state *priv, u16 *signal)
-{
-	u16 v;
-	u8 agc_lvl[2], cat;
-
-	dprintk("%s()\n", __func__);
-	lgs8gxx_read_reg(priv, 0x3F, &agc_lvl[0]);
-	lgs8gxx_read_reg(priv, 0x3E, &agc_lvl[1]);
-
-	v = agc_lvl[0];
-	v <<= 8;
-	v |= agc_lvl[1];
-
-	dprintk("agc_lvl: 0x%04X\n", v);
-
-	if (v < 0x100)
-		cat = 0;
-	else if (v < 0x190)
-		cat = 5;
-	else if (v < 0x2A8)
-		cat = 4;
-	else if (v < 0x381)
-		cat = 3;
-	else if (v < 0x400)
-		cat = 2;
-	else if (v == 0x400)
-		cat = 1;
-	else
-		cat = 0;
-
-	*signal = cat * 65535 / 5;
-
-	return 0;
-}
-
-static int lgs8913_read_signal_strength(struct lgs8gxx_state *priv, u16 *signal)
-{
-	u8 t; s8 ret;
-	s16 max_strength = 0;
-	u8 str;
-	u16 i, gi = priv->curr_gi;
-
-	dprintk("%s\n", __func__);
-
-	ret = lgs8gxx_read_reg(priv, 0x4B, &t);
-	if (ret != 0)
-		return -EIO;
-
-	if (fake_signal_str) {
-		if ((t & 0xC0) == 0xC0) {
-			dprintk("Fake signal strength\n");
-			*signal = 0x7FFF;
-		} else
-			*signal = 0;
-		return 0;
-	}
-
-	dprintk("gi = %d\n", gi);
-	for (i = 0; i < gi; i++) {
-
-		if ((i & 0xFF) == 0)
-			lgs8gxx_write_reg(priv, 0x84, 0x03 & (i >> 8));
-		lgs8gxx_write_reg(priv, 0x83, i & 0xFF);
-
-		lgs8gxx_read_reg(priv, 0x94, &str);
-		if (max_strength < str)
-			max_strength = str;
-	}
-
-	*signal = max_strength;
-	dprintk("%s: signal=0x%02X\n", __func__, *signal);
-
-	lgs8gxx_read_reg(priv, 0x95, &t);
-	dprintk("%s: AVG Noise=0x%02X\n", __func__, t);
-
-	return 0;
-}
-
-static int lgs8g75_read_signal_strength(struct lgs8gxx_state *priv, u16 *signal)
-{
-	u8 t;
-	s16 v = 0;
-
-	dprintk("%s\n", __func__);
-
-	lgs8gxx_read_reg(priv, 0xB1, &t);
-	v |= t;
-	v <<= 8;
-	lgs8gxx_read_reg(priv, 0xB0, &t);
-	v |= t;
-
-	*signal = v;
-	dprintk("%s: signal=0x%02X\n", __func__, *signal);
-
-	return 0;
-}
-
-static int lgs8gxx_read_signal_strength(struct dvb_frontend *fe, u16 *signal)
-{
-	struct lgs8gxx_state *priv = fe->demodulator_priv;
-
-	if (priv->config->prod == LGS8GXX_PROD_LGS8913)
-		return lgs8913_read_signal_strength(priv, signal);
-	else if (priv->config->prod == LGS8GXX_PROD_LGS8G75)
-		return lgs8g75_read_signal_strength(priv, signal);
-	else
-		return lgs8gxx_read_signal_agc(priv, signal);
-}
-
-static int lgs8gxx_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct lgs8gxx_state *priv = fe->demodulator_priv;
-	u8 t;
-	*snr = 0;
-
-	if (priv->config->prod == LGS8GXX_PROD_LGS8G75)
-		lgs8gxx_read_reg(priv, 0x34, &t);
-	else
-		lgs8gxx_read_reg(priv, 0x95, &t);
-	dprintk("AVG Noise=0x%02X\n", t);
-	*snr = 256 - t;
-	*snr <<= 8;
-	dprintk("snr=0x%x\n", *snr);
-
-	return 0;
-}
-
-static int lgs8gxx_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	*ucblocks = 0;
-	dprintk("%s: ucblocks=0x%x\n", __func__, *ucblocks);
-	return 0;
-}
-
-static void packet_counter_start(struct lgs8gxx_state *priv)
-{
-	u8 orig, t;
-
-	if (priv->config->prod == LGS8GXX_PROD_LGS8G75) {
-		lgs8gxx_read_reg(priv, 0x30, &orig);
-		orig &= 0xE7;
-		t = orig | 0x10;
-		lgs8gxx_write_reg(priv, 0x30, t);
-		t = orig | 0x18;
-		lgs8gxx_write_reg(priv, 0x30, t);
-		t = orig | 0x10;
-		lgs8gxx_write_reg(priv, 0x30, t);
-	} else {
-		lgs8gxx_write_reg(priv, 0xC6, 0x01);
-		lgs8gxx_write_reg(priv, 0xC6, 0x41);
-		lgs8gxx_write_reg(priv, 0xC6, 0x01);
-	}
-}
-
-static void packet_counter_stop(struct lgs8gxx_state *priv)
-{
-	u8 t;
-
-	if (priv->config->prod == LGS8GXX_PROD_LGS8G75) {
-		lgs8gxx_read_reg(priv, 0x30, &t);
-		t &= 0xE7;
-		lgs8gxx_write_reg(priv, 0x30, t);
-	} else {
-		lgs8gxx_write_reg(priv, 0xC6, 0x81);
-	}
-}
-
-static int lgs8gxx_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct lgs8gxx_state *priv = fe->demodulator_priv;
-	u8 reg_err, reg_total, t;
-	u32 total_cnt = 0, err_cnt = 0;
-	int i;
-
-	dprintk("%s\n", __func__);
-
-	packet_counter_start(priv);
-	msleep(200);
-	packet_counter_stop(priv);
-
-	if (priv->config->prod == LGS8GXX_PROD_LGS8G75) {
-		reg_total = 0x28; reg_err = 0x2C;
-	} else {
-		reg_total = 0xD0; reg_err = 0xD4;
-	}
-
-	for (i = 0; i < 4; i++) {
-		total_cnt <<= 8;
-		lgs8gxx_read_reg(priv, reg_total+3-i, &t);
-		total_cnt |= t;
-	}
-	for (i = 0; i < 4; i++) {
-		err_cnt <<= 8;
-		lgs8gxx_read_reg(priv, reg_err+3-i, &t);
-		err_cnt |= t;
-	}
-	dprintk("error=%d total=%d\n", err_cnt, total_cnt);
-
-	if (total_cnt == 0)
-		*ber = 0;
-	else
-		*ber = err_cnt * 100 / total_cnt;
-
-	dprintk("%s: ber=0x%x\n", __func__, *ber);
-	return 0;
-}
-
-static int lgs8gxx_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct lgs8gxx_state *priv = fe->demodulator_priv;
-
-	if (priv->config->tuner_address == 0)
-		return 0;
-	if (enable) {
-		u8 v = 0x80 | priv->config->tuner_address;
-		return lgs8gxx_write_reg(priv, 0x01, v);
-	}
-	return lgs8gxx_write_reg(priv, 0x01, 0);
-}
-
-static struct dvb_frontend_ops lgs8gxx_ops = {
-	.delsys = { SYS_DMBTH },
-	.info = {
-		.name = "Legend Silicon LGS8913/LGS8GXX DMB-TH",
-		.frequency_min = 474000000,
-		.frequency_max = 858000000,
-		.frequency_stepsize = 10000,
-		.caps =
-			FE_CAN_FEC_AUTO |
-			FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO |
-			FE_CAN_GUARD_INTERVAL_AUTO
-	},
-
-	.release = lgs8gxx_release,
-
-	.init = lgs8gxx_init,
-	.write = lgs8gxx_write,
-	.i2c_gate_ctrl = lgs8gxx_i2c_gate_ctrl,
-
-	.set_frontend = lgs8gxx_set_fe,
-	.get_frontend = lgs8gxx_get_fe,
-	.get_tune_settings = lgs8gxx_get_tune_settings,
-
-	.read_status = lgs8gxx_read_status,
-	.read_ber = lgs8gxx_read_ber,
-	.read_signal_strength = lgs8gxx_read_signal_strength,
-	.read_snr = lgs8gxx_read_snr,
-	.read_ucblocks = lgs8gxx_read_ucblocks,
-};
-
-struct dvb_frontend *lgs8gxx_attach(const struct lgs8gxx_config *config,
-	struct i2c_adapter *i2c)
-{
-	struct lgs8gxx_state *priv = NULL;
-	u8 data = 0;
-
-	dprintk("%s()\n", __func__);
-
-	if (config == NULL || i2c == NULL)
-		return NULL;
-
-	priv = kzalloc(sizeof(struct lgs8gxx_state), GFP_KERNEL);
-	if (priv == NULL)
-		goto error_out;
-
-	priv->config = config;
-	priv->i2c = i2c;
-
-	/* check if the demod is there */
-	if (lgs8gxx_read_reg(priv, 0, &data) != 0) {
-		dprintk("%s lgs8gxx not found at i2c addr 0x%02X\n",
-			__func__, priv->config->demod_address);
-		goto error_out;
-	}
-
-	lgs8gxx_read_reg(priv, 1, &data);
-
-	memcpy(&priv->frontend.ops, &lgs8gxx_ops,
-	       sizeof(struct dvb_frontend_ops));
-	priv->frontend.demodulator_priv = priv;
-
-	if (config->prod == LGS8GXX_PROD_LGS8G75)
-		lgs8g75_init_data(priv);
-
-	return &priv->frontend;
-
-error_out:
-	dprintk("%s() error_out\n", __func__);
-	kfree(priv);
-	return NULL;
-
-}
-EXPORT_SYMBOL(lgs8gxx_attach);
-
-MODULE_DESCRIPTION("Legend Silicon LGS8913/LGS8GXX DMB-TH demodulator driver");
-MODULE_AUTHOR("David T. L. Wong <davidtlwong@gmail.com>");
-MODULE_LICENSE("GPL");
-MODULE_FIRMWARE(LGS8GXX_FIRMWARE);
diff --git a/drivers/media/dvb/frontends/lgs8gxx.h b/drivers/media/dvb/frontends/lgs8gxx.h
deleted file mode 100644
index 33c3c5e..0000000
--- a/drivers/media/dvb/frontends/lgs8gxx.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- *    Support for Legend Silicon GB20600 (a.k.a DMB-TH) demodulator
- *    LGS8913, LGS8GL5, LGS8G75
- *    experimental support LGS8G42, LGS8G52
- *
- *    Copyright (C) 2007-2009 David T.L. Wong <davidtlwong@gmail.com>
- *    Copyright (C) 2008 Sirius International (Hong Kong) Limited
- *    Timothy Lee <timothy.lee@siriushk.com> (for initial work on LGS8GL5)
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef __LGS8GXX_H__
-#define __LGS8GXX_H__
-
-#include <linux/dvb/frontend.h>
-#include <linux/i2c.h>
-
-#define LGS8GXX_PROD_LGS8913 0
-#define LGS8GXX_PROD_LGS8GL5 1
-#define LGS8GXX_PROD_LGS8G42 3
-#define LGS8GXX_PROD_LGS8G52 4
-#define LGS8GXX_PROD_LGS8G54 5
-#define LGS8GXX_PROD_LGS8G75 6
-
-struct lgs8gxx_config {
-
-	/* product type */
-	u8 prod;
-
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* parallel or serial transport stream */
-	u8 serial_ts;
-
-	/* transport stream polarity*/
-	u8 ts_clk_pol;
-
-	/* transport stream clock gated by ts_valid */
-	u8 ts_clk_gated;
-
-	/* A/D Clock frequency */
-	u32 if_clk_freq; /* in kHz */
-
-	/* IF frequency */
-	u32 if_freq; /* in kHz */
-
-	/*Use External ADC*/
-	u8 ext_adc;
-
-	/*External ADC output two's complement*/
-	u8 adc_signed;
-
-	/*Sample IF data at falling edge of IF_CLK*/
-	u8 if_neg_edge;
-
-	/*IF use Negative center frequency*/
-	u8 if_neg_center;
-
-	/*8G75 internal ADC input range selection*/
-	/*0: 0.8Vpp, 1: 1.0Vpp, 2: 1.6Vpp, 3: 2.0Vpp*/
-	u8 adc_vpp;
-
-	/* slave address and configuration of the tuner */
-	u8 tuner_address;
-};
-
-#if defined(CONFIG_DVB_LGS8GXX) || \
-	(defined(CONFIG_DVB_LGS8GXX_MODULE) && defined(MODULE))
-extern struct dvb_frontend *lgs8gxx_attach(const struct lgs8gxx_config *config,
-					   struct i2c_adapter *i2c);
-#else
-static inline
-struct dvb_frontend *lgs8gxx_attach(const struct lgs8gxx_config *config,
-				    struct i2c_adapter *i2c) {
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_LGS8GXX */
-
-#endif /* __LGS8GXX_H__ */
diff --git a/drivers/media/dvb/frontends/lgs8gxx_priv.h b/drivers/media/dvb/frontends/lgs8gxx_priv.h
deleted file mode 100644
index 8ef376f..0000000
--- a/drivers/media/dvb/frontends/lgs8gxx_priv.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- *    Support for Legend Silicon GB20600 (a.k.a DMB-TH) demodulator
- *    LGS8913, LGS8GL5, LGS8G75
- *    experimental support LGS8G42, LGS8G52
- *
- *    Copyright (C) 2007-2009 David T.L. Wong <davidtlwong@gmail.com>
- *    Copyright (C) 2008 Sirius International (Hong Kong) Limited
- *    Timothy Lee <timothy.lee@siriushk.com> (for initial work on LGS8GL5)
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef LGS8913_PRIV_H
-#define LGS8913_PRIV_H
-
-struct lgs8gxx_state {
-	struct i2c_adapter *i2c;
-	/* configuration settings */
-	const struct lgs8gxx_config *config;
-	struct dvb_frontend frontend;
-	u16 curr_gi; /* current guard interval */
-};
-
-#define SC_MASK		0x1C	/* Sub-Carrier Modulation Mask */
-#define SC_QAM64	0x10	/* 64QAM modulation */
-#define SC_QAM32	0x0C	/* 32QAM modulation */
-#define SC_QAM16	0x08	/* 16QAM modulation */
-#define SC_QAM4NR	0x04	/* 4QAM-NR modulation */
-#define SC_QAM4		0x00	/* 4QAM modulation */
-
-#define LGS_FEC_MASK	0x03	/* FEC Rate Mask */
-#define LGS_FEC_0_4	0x00	/* FEC Rate 0.4 */
-#define LGS_FEC_0_6	0x01	/* FEC Rate 0.6 */
-#define LGS_FEC_0_8	0x02	/* FEC Rate 0.8 */
-
-#define TIM_MASK	  0x20	/* Time Interleave Length Mask */
-#define TIM_LONG	  0x20	/* Time Interleave Length = 720 */
-#define TIM_MIDDLE     0x00   /* Time Interleave Length = 240 */
-
-#define CF_MASK	0x80	/* Control Frame Mask */
-#define CF_EN	0x80	/* Control Frame On */
-
-#define GI_MASK	0x03	/* Guard Interval Mask */
-#define GI_420	0x00	/* 1/9 Guard Interval */
-#define GI_595	0x01	/* */
-#define GI_945	0x02	/* 1/4 Guard Interval */
-
-
-#define TS_PARALLEL	0x00	/* Parallel TS Output a.k.a. SPI */
-#define TS_SERIAL	0x01	/* Serial TS Output a.k.a. SSI */
-#define TS_CLK_NORMAL		0x00	/* MPEG Clock Normal */
-#define TS_CLK_INVERTED		0x02	/* MPEG Clock Inverted */
-#define TS_CLK_GATED		0x00	/* MPEG clock gated */
-#define TS_CLK_FREERUN		0x04	/* MPEG clock free running*/
-
-
-#endif
diff --git a/drivers/media/dvb/frontends/lnbh24.h b/drivers/media/dvb/frontends/lnbh24.h
deleted file mode 100644
index c059b16..0000000
--- a/drivers/media/dvb/frontends/lnbh24.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * lnbh24.h - driver for lnb supply and control ic lnbh24
- *
- * Copyright (C) 2009 NetUP Inc.
- * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _LNBH24_H
-#define _LNBH24_H
-
-/* system register bits */
-#define LNBH24_OLF	0x01
-#define LNBH24_OTF	0x02
-#define LNBH24_EN	0x04
-#define LNBH24_VSEL	0x08
-#define LNBH24_LLC	0x10
-#define LNBH24_TEN	0x20
-#define LNBH24_TTX	0x40
-#define LNBH24_PCL	0x80
-
-#include <linux/dvb/frontend.h>
-
-#if defined(CONFIG_DVB_LNBP21) || (defined(CONFIG_DVB_LNBP21_MODULE) \
-							&& defined(MODULE))
-/* override_set and override_clear control which
-   system register bits (above) to always set & clear */
-extern struct dvb_frontend *lnbh24_attach(struct dvb_frontend *fe,
-				struct i2c_adapter *i2c, u8 override_set,
-				u8 override_clear, u8 i2c_addr);
-#else
-static inline struct dvb_frontend *lnbh24_attach(struct dvb_frontend *fe,
-				struct i2c_adapter *i2c, u8 override_set,
-				u8 override_clear, u8 i2c_addr)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif
diff --git a/drivers/media/dvb/frontends/lnbp21.c b/drivers/media/dvb/frontends/lnbp21.c
deleted file mode 100644
index 13437259..0000000
--- a/drivers/media/dvb/frontends/lnbp21.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * lnbp21.c - driver for lnb supply and control ic lnbp21
- *
- * Copyright (C) 2006, 2009 Oliver Endriss <o.endriss@gmx.de>
- * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org
- */
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "lnbp21.h"
-#include "lnbh24.h"
-
-struct lnbp21 {
-	u8			config;
-	u8			override_or;
-	u8			override_and;
-	struct i2c_adapter	*i2c;
-	u8			i2c_addr;
-};
-
-static int lnbp21_set_voltage(struct dvb_frontend *fe,
-					fe_sec_voltage_t voltage)
-{
-	struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->sec_priv;
-	struct i2c_msg msg = {	.addr = lnbp21->i2c_addr, .flags = 0,
-				.buf = &lnbp21->config,
-				.len = sizeof(lnbp21->config) };
-
-	lnbp21->config &= ~(LNBP21_VSEL | LNBP21_EN);
-
-	switch(voltage) {
-	case SEC_VOLTAGE_OFF:
-		break;
-	case SEC_VOLTAGE_13:
-		lnbp21->config |= LNBP21_EN;
-		break;
-	case SEC_VOLTAGE_18:
-		lnbp21->config |= (LNBP21_EN | LNBP21_VSEL);
-		break;
-	default:
-		return -EINVAL;
-	};
-
-	lnbp21->config |= lnbp21->override_or;
-	lnbp21->config &= lnbp21->override_and;
-
-	return (i2c_transfer(lnbp21->i2c, &msg, 1) == 1) ? 0 : -EIO;
-}
-
-static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg)
-{
-	struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->sec_priv;
-	struct i2c_msg msg = {	.addr = lnbp21->i2c_addr, .flags = 0,
-				.buf = &lnbp21->config,
-				.len = sizeof(lnbp21->config) };
-
-	if (arg)
-		lnbp21->config |= LNBP21_LLC;
-	else
-		lnbp21->config &= ~LNBP21_LLC;
-
-	lnbp21->config |= lnbp21->override_or;
-	lnbp21->config &= lnbp21->override_and;
-
-	return (i2c_transfer(lnbp21->i2c, &msg, 1) == 1) ? 0 : -EIO;
-}
-
-static int lnbp21_set_tone(struct dvb_frontend *fe,
-				fe_sec_tone_mode_t tone)
-{
-	struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->sec_priv;
-	struct i2c_msg msg = {	.addr = lnbp21->i2c_addr, .flags = 0,
-				.buf = &lnbp21->config,
-				.len = sizeof(lnbp21->config) };
-
-	switch (tone) {
-	case SEC_TONE_OFF:
-		lnbp21->config &= ~LNBP21_TEN;
-		break;
-	case SEC_TONE_ON:
-		lnbp21->config |= LNBP21_TEN;
-		break;
-	default:
-		return -EINVAL;
-	};
-
-	lnbp21->config |= lnbp21->override_or;
-	lnbp21->config &= lnbp21->override_and;
-
-	return (i2c_transfer(lnbp21->i2c, &msg, 1) == 1) ? 0 : -EIO;
-}
-
-static void lnbp21_release(struct dvb_frontend *fe)
-{
-	/* LNBP power off */
-	lnbp21_set_voltage(fe, SEC_VOLTAGE_OFF);
-
-	/* free data */
-	kfree(fe->sec_priv);
-	fe->sec_priv = NULL;
-}
-
-static struct dvb_frontend *lnbx2x_attach(struct dvb_frontend *fe,
-				struct i2c_adapter *i2c, u8 override_set,
-				u8 override_clear, u8 i2c_addr, u8 config)
-{
-	struct lnbp21 *lnbp21 = kmalloc(sizeof(struct lnbp21), GFP_KERNEL);
-	if (!lnbp21)
-		return NULL;
-
-	/* default configuration */
-	lnbp21->config = config;
-	lnbp21->i2c = i2c;
-	lnbp21->i2c_addr = i2c_addr;
-	fe->sec_priv = lnbp21;
-
-	/* bits which should be forced to '1' */
-	lnbp21->override_or = override_set;
-
-	/* bits which should be forced to '0' */
-	lnbp21->override_and = ~override_clear;
-
-	/* detect if it is present or not */
-	if (lnbp21_set_voltage(fe, SEC_VOLTAGE_OFF)) {
-		kfree(lnbp21);
-		return NULL;
-	}
-
-	/* install release callback */
-	fe->ops.release_sec = lnbp21_release;
-
-	/* override frontend ops */
-	fe->ops.set_voltage = lnbp21_set_voltage;
-	fe->ops.enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
-	if (!(override_clear & LNBH24_TEN)) /*22kHz logic controlled by demod*/
-		fe->ops.set_tone = lnbp21_set_tone;
-	printk(KERN_INFO "LNBx2x attached on addr=%x\n", lnbp21->i2c_addr);
-
-	return fe;
-}
-
-struct dvb_frontend *lnbh24_attach(struct dvb_frontend *fe,
-				struct i2c_adapter *i2c, u8 override_set,
-				u8 override_clear, u8 i2c_addr)
-{
-	return lnbx2x_attach(fe, i2c, override_set, override_clear,
-							i2c_addr, LNBH24_TTX);
-}
-EXPORT_SYMBOL(lnbh24_attach);
-
-struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe,
-				struct i2c_adapter *i2c, u8 override_set,
-				u8 override_clear)
-{
-	return lnbx2x_attach(fe, i2c, override_set, override_clear,
-							0x08, LNBP21_ISEL);
-}
-EXPORT_SYMBOL(lnbp21_attach);
-
-MODULE_DESCRIPTION("Driver for lnb supply and control ic lnbp21, lnbh24");
-MODULE_AUTHOR("Oliver Endriss, Igor M. Liplianin");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/lnbp21.h b/drivers/media/dvb/frontends/lnbp21.h
deleted file mode 100644
index fcdf1c6..0000000
--- a/drivers/media/dvb/frontends/lnbp21.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * lnbp21.h - driver for lnb supply and control ic lnbp21
- *
- * Copyright (C) 2006 Oliver Endriss
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org
- */
-
-#ifndef _LNBP21_H
-#define _LNBP21_H
-
-/* system register bits */
-/* [RO] 0=OK; 1=over current limit flag */
-#define LNBP21_OLF	0x01
-/* [RO] 0=OK; 1=over temperature flag (150 C) */
-#define LNBP21_OTF	0x02
-/* [RW] 0=disable LNB power, enable loopthrough
-	1=enable LNB power, disable loopthrough */
-#define LNBP21_EN	0x04
-/* [RW] 0=low voltage (13/14V, vert pol)
-	1=high voltage (18/19V,horiz pol) */
-#define LNBP21_VSEL	0x08
-/* [RW] increase LNB voltage by 1V:
-	0=13/18V; 1=14/19V */
-#define LNBP21_LLC	0x10
-/* [RW] 0=tone controlled by DSQIN pin
-	1=tone enable, disable DSQIN */
-#define LNBP21_TEN	0x20
-/* [RW] current limit select:
-	0:Iout=500-650mA Isc=300mA
-	1:Iout=400-550mA Isc=200mA */
-#define LNBP21_ISEL	0x40
-/* [RW] short-circuit protect:
-	0=pulsed (dynamic) curr limiting
-	1=static curr limiting */
-#define LNBP21_PCL	0x80
-
-#include <linux/dvb/frontend.h>
-
-#if defined(CONFIG_DVB_LNBP21) || (defined(CONFIG_DVB_LNBP21_MODULE) \
-							&& defined(MODULE))
-/* override_set and override_clear control which
- system register bits (above) to always set & clear */
-extern struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe,
-				struct i2c_adapter *i2c, u8 override_set,
-				u8 override_clear);
-#else
-static inline struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe,
-				struct i2c_adapter *i2c, u8 override_set,
-				u8 override_clear)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif
diff --git a/drivers/media/dvb/frontends/lnbp22.c b/drivers/media/dvb/frontends/lnbp22.c
deleted file mode 100644
index 84ad039..0000000
--- a/drivers/media/dvb/frontends/lnbp22.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * lnbp22.h - driver for lnb supply and control ic lnbp22
- *
- * Copyright (C) 2006 Dominik Kuhlen
- * Based on lnbp21 driver
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org
- */
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "lnbp22.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
-
-
-#define dprintk(lvl, arg...) if (debug >= (lvl)) printk(arg)
-
-struct lnbp22 {
-	u8		    config[4];
-	struct i2c_adapter *i2c;
-};
-
-static int lnbp22_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-{
-	struct lnbp22 *lnbp22 = (struct lnbp22 *)fe->sec_priv;
-	struct i2c_msg msg = {
-		.addr = 0x08,
-		.flags = 0,
-		.buf = (char *)&lnbp22->config,
-		.len = sizeof(lnbp22->config),
-	};
-
-	dprintk(1, "%s: %d (18V=%d 13V=%d)\n", __func__, voltage,
-	       SEC_VOLTAGE_18, SEC_VOLTAGE_13);
-
-	lnbp22->config[3] = 0x60; /* Power down */
-	switch (voltage) {
-	case SEC_VOLTAGE_OFF:
-		break;
-	case SEC_VOLTAGE_13:
-		lnbp22->config[3] |= LNBP22_EN;
-		break;
-	case SEC_VOLTAGE_18:
-		lnbp22->config[3] |= (LNBP22_EN | LNBP22_VSEL);
-		break;
-	default:
-		return -EINVAL;
-	};
-
-	dprintk(1, "%s: 0x%02x)\n", __func__, lnbp22->config[3]);
-	return (i2c_transfer(lnbp22->i2c, &msg, 1) == 1) ? 0 : -EIO;
-}
-
-static int lnbp22_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg)
-{
-	struct lnbp22 *lnbp22 = (struct lnbp22 *) fe->sec_priv;
-	struct i2c_msg msg = {
-		.addr = 0x08,
-		.flags = 0,
-		.buf = (char *)&lnbp22->config,
-		.len = sizeof(lnbp22->config),
-	};
-
-	dprintk(1, "%s: %d\n", __func__, (int)arg);
-	if (arg)
-		lnbp22->config[3] |= LNBP22_LLC;
-	else
-		lnbp22->config[3] &= ~LNBP22_LLC;
-
-	return (i2c_transfer(lnbp22->i2c, &msg, 1) == 1) ? 0 : -EIO;
-}
-
-static void lnbp22_release(struct dvb_frontend *fe)
-{
-	dprintk(1, "%s\n", __func__);
-	/* LNBP power off */
-	lnbp22_set_voltage(fe, SEC_VOLTAGE_OFF);
-
-	/* free data */
-	kfree(fe->sec_priv);
-	fe->sec_priv = NULL;
-}
-
-struct dvb_frontend *lnbp22_attach(struct dvb_frontend *fe,
-					struct i2c_adapter *i2c)
-{
-	struct lnbp22 *lnbp22 = kmalloc(sizeof(struct lnbp22), GFP_KERNEL);
-	if (!lnbp22)
-		return NULL;
-
-	/* default configuration */
-	lnbp22->config[0] = 0x00; /* ? */
-	lnbp22->config[1] = 0x28; /* ? */
-	lnbp22->config[2] = 0x48; /* ? */
-	lnbp22->config[3] = 0x60; /* Power down */
-	lnbp22->i2c = i2c;
-	fe->sec_priv = lnbp22;
-
-	/* detect if it is present or not */
-	if (lnbp22_set_voltage(fe, SEC_VOLTAGE_OFF)) {
-		dprintk(0, "%s LNBP22 not found\n", __func__);
-		kfree(lnbp22);
-		fe->sec_priv = NULL;
-		return NULL;
-	}
-
-	/* install release callback */
-	fe->ops.release_sec = lnbp22_release;
-
-	/* override frontend ops */
-	fe->ops.set_voltage = lnbp22_set_voltage;
-	fe->ops.enable_high_lnb_voltage = lnbp22_enable_high_lnb_voltage;
-
-	return fe;
-}
-EXPORT_SYMBOL(lnbp22_attach);
-
-MODULE_DESCRIPTION("Driver for lnb supply and control ic lnbp22");
-MODULE_AUTHOR("Dominik Kuhlen");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/lnbp22.h b/drivers/media/dvb/frontends/lnbp22.h
deleted file mode 100644
index 63e2dec..0000000
--- a/drivers/media/dvb/frontends/lnbp22.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * lnbp22.h - driver for lnb supply and control ic lnbp22
- *
- * Copyright (C) 2006 Dominik Kuhlen
- * Based on lnbp21.h
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org
- */
-
-#ifndef _LNBP22_H
-#define _LNBP22_H
-
-/* Enable */
-#define LNBP22_EN	  0x10
-/* Voltage selection */
-#define LNBP22_VSEL	0x02
-/* Plus 1 Volt Bit */
-#define LNBP22_LLC	0x01
-
-#include <linux/dvb/frontend.h>
-
-#if defined(CONFIG_DVB_LNBP22) || \
-		(defined(CONFIG_DVB_LNBP22_MODULE) && defined(MODULE))
-/*
- * override_set and override_clear control which system register bits (above)
- * to always set & clear
- */
-extern struct dvb_frontend *lnbp22_attach(struct dvb_frontend *fe,
-						struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *lnbp22_attach(struct dvb_frontend *fe,
-						struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_LNBP22 */
-
-#endif /* _LNBP22_H */
diff --git a/drivers/media/dvb/frontends/m88rs2000.c b/drivers/media/dvb/frontends/m88rs2000.c
deleted file mode 100644
index 312588e..0000000
--- a/drivers/media/dvb/frontends/m88rs2000.c
+++ /dev/null
@@ -1,919 +0,0 @@
-/*
-	Driver for M88RS2000 demodulator and tuner
-
-	Copyright (C) 2012 Malcolm Priestley (tvboxspy@gmail.com)
-	Beta Driver
-
-	Include various calculation code from DS3000 driver.
-	Copyright (C) 2009 Konstantin Dimitrov.
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/jiffies.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-
-
-#include "dvb_frontend.h"
-#include "m88rs2000.h"
-
-struct m88rs2000_state {
-	struct i2c_adapter *i2c;
-	const struct m88rs2000_config *config;
-	struct dvb_frontend frontend;
-	u8 no_lock_count;
-	u32 tuner_frequency;
-	u32 symbol_rate;
-	fe_code_rate_t fec_inner;
-	u8 tuner_level;
-	int errmode;
-};
-
-static int m88rs2000_debug;
-
-module_param_named(debug, m88rs2000_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able)).");
-
-#define dprintk(level, args...) do { \
-	if (level & m88rs2000_debug) \
-		printk(KERN_DEBUG "m88rs2000-fe: " args); \
-} while (0)
-
-#define deb_info(args...)  dprintk(0x01, args)
-#define info(format, arg...) \
-	printk(KERN_INFO "m88rs2000-fe: " format "\n" , ## arg)
-
-static int m88rs2000_writereg(struct m88rs2000_state *state, u8 tuner,
-	u8 reg, u8 data)
-{
-	int ret;
-	u8 addr = (tuner == 0) ? state->config->tuner_addr :
-		state->config->demod_addr;
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg = {
-		.addr = addr,
-		.flags = 0,
-		.buf = buf,
-		.len = 2
-	};
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-
-	if (ret != 1)
-		deb_info("%s: writereg error (reg == 0x%02x, val == 0x%02x, "
-			"ret == %i)\n", __func__, reg, data, ret);
-
-	return (ret != 1) ? -EREMOTEIO : 0;
-}
-
-static int m88rs2000_demod_write(struct m88rs2000_state *state, u8 reg, u8 data)
-{
-	return m88rs2000_writereg(state, 1, reg, data);
-}
-
-static int m88rs2000_tuner_write(struct m88rs2000_state *state, u8 reg, u8 data)
-{
-	m88rs2000_demod_write(state, 0x81, 0x84);
-	udelay(10);
-	return m88rs2000_writereg(state, 0, reg, data);
-
-}
-
-static int m88rs2000_write(struct dvb_frontend *fe, const u8 buf[], int len)
-{
-	struct m88rs2000_state *state = fe->demodulator_priv;
-
-	if (len != 2)
-		return -EINVAL;
-
-	return m88rs2000_writereg(state, 1, buf[0], buf[1]);
-}
-
-static u8 m88rs2000_readreg(struct m88rs2000_state *state, u8 tuner, u8 reg)
-{
-	int ret;
-	u8 b0[] = { reg };
-	u8 b1[] = { 0 };
-	u8 addr = (tuner == 0) ? state->config->tuner_addr :
-		state->config->demod_addr;
-	struct i2c_msg msg[] = {
-		{
-			.addr = addr,
-			.flags = 0,
-			.buf = b0,
-			.len = 1
-		}, {
-			.addr = addr,
-			.flags = I2C_M_RD,
-			.buf = b1,
-			.len = 1
-		}
-	};
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2)
-		deb_info("%s: readreg error (reg == 0x%02x, ret == %i)\n",
-				__func__, reg, ret);
-
-	return b1[0];
-}
-
-static u8 m88rs2000_demod_read(struct m88rs2000_state *state, u8 reg)
-{
-	return m88rs2000_readreg(state, 1, reg);
-}
-
-static u8 m88rs2000_tuner_read(struct m88rs2000_state *state, u8 reg)
-{
-	m88rs2000_demod_write(state, 0x81, 0x85);
-	udelay(10);
-	return m88rs2000_readreg(state, 0, reg);
-}
-
-static int m88rs2000_set_symbolrate(struct dvb_frontend *fe, u32 srate)
-{
-	struct m88rs2000_state *state = fe->demodulator_priv;
-	int ret;
-	u32 temp;
-	u8 b[3];
-
-	if ((srate < 1000000) || (srate > 45000000))
-		return -EINVAL;
-
-	temp = srate / 1000;
-	temp *= 11831;
-	temp /= 68;
-	temp -= 3;
-
-	b[0] = (u8) (temp >> 16) & 0xff;
-	b[1] = (u8) (temp >> 8) & 0xff;
-	b[2] = (u8) temp & 0xff;
-	ret = m88rs2000_demod_write(state, 0x93, b[2]);
-	ret |= m88rs2000_demod_write(state, 0x94, b[1]);
-	ret |= m88rs2000_demod_write(state, 0x95, b[0]);
-
-	deb_info("m88rs2000: m88rs2000_set_symbolrate\n");
-	return ret;
-}
-
-static int m88rs2000_send_diseqc_msg(struct dvb_frontend *fe,
-				    struct dvb_diseqc_master_cmd *m)
-{
-	struct m88rs2000_state *state = fe->demodulator_priv;
-
-	int i;
-	u8 reg;
-	deb_info("%s\n", __func__);
-	m88rs2000_demod_write(state, 0x9a, 0x30);
-	reg = m88rs2000_demod_read(state, 0xb2);
-	reg &= 0x3f;
-	m88rs2000_demod_write(state, 0xb2, reg);
-	for (i = 0; i <  m->msg_len; i++)
-		m88rs2000_demod_write(state, 0xb3 + i, m->msg[i]);
-
-	reg = m88rs2000_demod_read(state, 0xb1);
-	reg &= 0x87;
-	reg |= ((m->msg_len - 1) << 3) | 0x07;
-	reg &= 0x7f;
-	m88rs2000_demod_write(state, 0xb1, reg);
-
-	for (i = 0; i < 15; i++) {
-		if ((m88rs2000_demod_read(state, 0xb1) & 0x40) == 0x0)
-			break;
-		msleep(20);
-	}
-
-	reg = m88rs2000_demod_read(state, 0xb1);
-	if ((reg & 0x40) > 0x0) {
-		reg &= 0x7f;
-		reg |= 0x40;
-		m88rs2000_demod_write(state, 0xb1, reg);
-	}
-
-	reg = m88rs2000_demod_read(state, 0xb2);
-	reg &= 0x3f;
-	reg |= 0x80;
-	m88rs2000_demod_write(state, 0xb2, reg);
-	m88rs2000_demod_write(state, 0x9a, 0xb0);
-
-
-	return 0;
-}
-
-static int m88rs2000_send_diseqc_burst(struct dvb_frontend *fe,
-						fe_sec_mini_cmd_t burst)
-{
-	struct m88rs2000_state *state = fe->demodulator_priv;
-	u8 reg0, reg1;
-	deb_info("%s\n", __func__);
-	m88rs2000_demod_write(state, 0x9a, 0x30);
-	msleep(50);
-	reg0 = m88rs2000_demod_read(state, 0xb1);
-	reg1 = m88rs2000_demod_read(state, 0xb2);
-	/* TODO complete this section */
-	m88rs2000_demod_write(state, 0xb2, reg1);
-	m88rs2000_demod_write(state, 0xb1, reg0);
-	m88rs2000_demod_write(state, 0x9a, 0xb0);
-
-	return 0;
-}
-
-static int m88rs2000_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
-{
-	struct m88rs2000_state *state = fe->demodulator_priv;
-	u8 reg0, reg1;
-	m88rs2000_demod_write(state, 0x9a, 0x30);
-	reg0 = m88rs2000_demod_read(state, 0xb1);
-	reg1 = m88rs2000_demod_read(state, 0xb2);
-
-	reg1 &= 0x3f;
-
-	switch (tone) {
-	case SEC_TONE_ON:
-		reg0 |= 0x4;
-		reg0 &= 0xbc;
-		break;
-	case SEC_TONE_OFF:
-		reg1 |= 0x80;
-		break;
-	default:
-		break;
-	}
-	m88rs2000_demod_write(state, 0xb2, reg1);
-	m88rs2000_demod_write(state, 0xb1, reg0);
-	m88rs2000_demod_write(state, 0x9a, 0xb0);
-	return 0;
-}
-
-struct inittab {
-	u8 cmd;
-	u8 reg;
-	u8 val;
-};
-
-struct inittab m88rs2000_setup[] = {
-	{DEMOD_WRITE, 0x9a, 0x30},
-	{DEMOD_WRITE, 0x00, 0x01},
-	{WRITE_DELAY, 0x19, 0x00},
-	{DEMOD_WRITE, 0x00, 0x00},
-	{DEMOD_WRITE, 0x9a, 0xb0},
-	{DEMOD_WRITE, 0x81, 0xc1},
-	{TUNER_WRITE, 0x42, 0x73},
-	{TUNER_WRITE, 0x05, 0x07},
-	{TUNER_WRITE, 0x20, 0x27},
-	{TUNER_WRITE, 0x07, 0x02},
-	{TUNER_WRITE, 0x11, 0xff},
-	{TUNER_WRITE, 0x60, 0xf9},
-	{TUNER_WRITE, 0x08, 0x01},
-	{TUNER_WRITE, 0x00, 0x41},
-	{DEMOD_WRITE, 0x81, 0x81},
-	{DEMOD_WRITE, 0x86, 0xc6},
-	{DEMOD_WRITE, 0x9a, 0x30},
-	{DEMOD_WRITE, 0xf0, 0x22},
-	{DEMOD_WRITE, 0xf1, 0xbf},
-	{DEMOD_WRITE, 0xb0, 0x45},
-	{DEMOD_WRITE, 0xb2, 0x01}, /* set voltage pin always set 1*/
-	{DEMOD_WRITE, 0x9a, 0xb0},
-	{0xff, 0xaa, 0xff}
-};
-
-struct inittab m88rs2000_shutdown[] = {
-	{DEMOD_WRITE, 0x9a, 0x30},
-	{DEMOD_WRITE, 0xb0, 0x00},
-	{DEMOD_WRITE, 0xf1, 0x89},
-	{DEMOD_WRITE, 0x00, 0x01},
-	{DEMOD_WRITE, 0x9a, 0xb0},
-	{TUNER_WRITE, 0x00, 0x40},
-	{DEMOD_WRITE, 0x81, 0x81},
-	{0xff, 0xaa, 0xff}
-};
-
-struct inittab tuner_reset[] = {
-	{TUNER_WRITE, 0x42, 0x73},
-	{TUNER_WRITE, 0x05, 0x07},
-	{TUNER_WRITE, 0x20, 0x27},
-	{TUNER_WRITE, 0x07, 0x02},
-	{TUNER_WRITE, 0x11, 0xff},
-	{TUNER_WRITE, 0x60, 0xf9},
-	{TUNER_WRITE, 0x08, 0x01},
-	{TUNER_WRITE, 0x00, 0x41},
-	{0xff, 0xaa, 0xff}
-};
-
-struct inittab fe_reset[] = {
-	{DEMOD_WRITE, 0x00, 0x01},
-	{DEMOD_WRITE, 0xf1, 0xbf},
-	{DEMOD_WRITE, 0x00, 0x01},
-	{DEMOD_WRITE, 0x20, 0x81},
-	{DEMOD_WRITE, 0x21, 0x80},
-	{DEMOD_WRITE, 0x10, 0x33},
-	{DEMOD_WRITE, 0x11, 0x44},
-	{DEMOD_WRITE, 0x12, 0x07},
-	{DEMOD_WRITE, 0x18, 0x20},
-	{DEMOD_WRITE, 0x28, 0x04},
-	{DEMOD_WRITE, 0x29, 0x8e},
-	{DEMOD_WRITE, 0x3b, 0xff},
-	{DEMOD_WRITE, 0x32, 0x10},
-	{DEMOD_WRITE, 0x33, 0x02},
-	{DEMOD_WRITE, 0x34, 0x30},
-	{DEMOD_WRITE, 0x35, 0xff},
-	{DEMOD_WRITE, 0x38, 0x50},
-	{DEMOD_WRITE, 0x39, 0x68},
-	{DEMOD_WRITE, 0x3c, 0x7f},
-	{DEMOD_WRITE, 0x3d, 0x0f},
-	{DEMOD_WRITE, 0x45, 0x20},
-	{DEMOD_WRITE, 0x46, 0x24},
-	{DEMOD_WRITE, 0x47, 0x7c},
-	{DEMOD_WRITE, 0x48, 0x16},
-	{DEMOD_WRITE, 0x49, 0x04},
-	{DEMOD_WRITE, 0x4a, 0x01},
-	{DEMOD_WRITE, 0x4b, 0x78},
-	{DEMOD_WRITE, 0X4d, 0xd2},
-	{DEMOD_WRITE, 0x4e, 0x6d},
-	{DEMOD_WRITE, 0x50, 0x30},
-	{DEMOD_WRITE, 0x51, 0x30},
-	{DEMOD_WRITE, 0x54, 0x7b},
-	{DEMOD_WRITE, 0x56, 0x09},
-	{DEMOD_WRITE, 0x58, 0x59},
-	{DEMOD_WRITE, 0x59, 0x37},
-	{DEMOD_WRITE, 0x63, 0xfa},
-	{0xff, 0xaa, 0xff}
-};
-
-struct inittab fe_trigger[] = {
-	{DEMOD_WRITE, 0x97, 0x04},
-	{DEMOD_WRITE, 0x99, 0x77},
-	{DEMOD_WRITE, 0x9b, 0x64},
-	{DEMOD_WRITE, 0x9e, 0x00},
-	{DEMOD_WRITE, 0x9f, 0xf8},
-	{DEMOD_WRITE, 0xa0, 0x20},
-	{DEMOD_WRITE, 0xa1, 0xe0},
-	{DEMOD_WRITE, 0xa3, 0x38},
-	{DEMOD_WRITE, 0x98, 0xff},
-	{DEMOD_WRITE, 0xc0, 0x0f},
-	{DEMOD_WRITE, 0x89, 0x01},
-	{DEMOD_WRITE, 0x00, 0x00},
-	{WRITE_DELAY, 0x0a, 0x00},
-	{DEMOD_WRITE, 0x00, 0x01},
-	{DEMOD_WRITE, 0x00, 0x00},
-	{DEMOD_WRITE, 0x9a, 0xb0},
-	{0xff, 0xaa, 0xff}
-};
-
-static int m88rs2000_tab_set(struct m88rs2000_state *state,
-		struct inittab *tab)
-{
-	int ret = 0;
-	u8 i;
-	if (tab == NULL)
-		return -EINVAL;
-
-	for (i = 0; i < 255; i++) {
-		switch (tab[i].cmd) {
-		case 0x01:
-			ret = m88rs2000_demod_write(state, tab[i].reg,
-				tab[i].val);
-			break;
-		case 0x02:
-			ret = m88rs2000_tuner_write(state, tab[i].reg,
-				tab[i].val);
-			break;
-		case 0x10:
-			if (tab[i].reg > 0)
-				mdelay(tab[i].reg);
-			break;
-		case 0xff:
-			if (tab[i].reg == 0xaa && tab[i].val == 0xff)
-				return 0;
-		case 0x00:
-			break;
-		default:
-			return -EINVAL;
-		}
-		if (ret < 0)
-			return -ENODEV;
-	}
-	return 0;
-}
-
-static int m88rs2000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t volt)
-{
-	struct m88rs2000_state *state = fe->demodulator_priv;
-	u8 data;
-
-	data = m88rs2000_demod_read(state, 0xb2);
-	data |= 0x03; /* bit0 V/H, bit1 off/on */
-
-	switch (volt) {
-	case SEC_VOLTAGE_18:
-		data &= ~0x03;
-		break;
-	case SEC_VOLTAGE_13:
-		data &= ~0x03;
-		data |= 0x01;
-		break;
-	case SEC_VOLTAGE_OFF:
-		break;
-	}
-
-	m88rs2000_demod_write(state, 0xb2, data);
-
-	return 0;
-}
-
-static int m88rs2000_startup(struct m88rs2000_state *state)
-{
-	int ret = 0;
-	u8 reg;
-
-	reg = m88rs2000_tuner_read(state, 0x00);
-	if ((reg & 0x40) == 0)
-		ret = -ENODEV;
-
-	return ret;
-}
-
-static int m88rs2000_init(struct dvb_frontend *fe)
-{
-	struct m88rs2000_state *state = fe->demodulator_priv;
-	int ret;
-
-	deb_info("m88rs2000: init chip\n");
-	/* Setup frontend from shutdown/cold */
-	ret = m88rs2000_tab_set(state, m88rs2000_setup);
-
-	return ret;
-}
-
-static int m88rs2000_sleep(struct dvb_frontend *fe)
-{
-	struct m88rs2000_state *state = fe->demodulator_priv;
-	int ret;
-	/* Shutdown the frondend */
-	ret = m88rs2000_tab_set(state, m88rs2000_shutdown);
-	return ret;
-}
-
-static int m88rs2000_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct m88rs2000_state *state = fe->demodulator_priv;
-	u8 reg = m88rs2000_demod_read(state, 0x8c);
-
-	*status = 0;
-
-	if ((reg & 0x7) == 0x7) {
-		*status = FE_HAS_CARRIER | FE_HAS_SIGNAL | FE_HAS_VITERBI
-			| FE_HAS_LOCK;
-		if (state->config->set_ts_params)
-			state->config->set_ts_params(fe, CALL_IS_READ);
-	}
-	return 0;
-}
-
-/* Extact code for these unknown but lmedm04 driver uses interupt callbacks */
-
-static int m88rs2000_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	deb_info("m88rs2000_read_ber %d\n", *ber);
-	*ber = 0;
-	return 0;
-}
-
-static int m88rs2000_read_signal_strength(struct dvb_frontend *fe,
-	u16 *strength)
-{
-	*strength = 0;
-	return 0;
-}
-
-static int m88rs2000_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	deb_info("m88rs2000_read_snr %d\n", *snr);
-	*snr = 0;
-	return 0;
-}
-
-static int m88rs2000_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	deb_info("m88rs2000_read_ber %d\n", *ucblocks);
-	*ucblocks = 0;
-	return 0;
-}
-
-static int m88rs2000_tuner_gate_ctrl(struct m88rs2000_state *state, u8 offset)
-{
-	int ret;
-	ret = m88rs2000_tuner_write(state, 0x51, 0x1f - offset);
-	ret |= m88rs2000_tuner_write(state, 0x51, 0x1f);
-	ret |= m88rs2000_tuner_write(state, 0x50, offset);
-	ret |= m88rs2000_tuner_write(state, 0x50, 0x00);
-	msleep(20);
-	return ret;
-}
-
-static int m88rs2000_set_tuner_rf(struct dvb_frontend *fe)
-{
-	struct m88rs2000_state *state = fe->demodulator_priv;
-	int reg;
-	reg = m88rs2000_tuner_read(state, 0x3d);
-	reg &= 0x7f;
-	if (reg < 0x16)
-		reg = 0xa1;
-	else if (reg == 0x16)
-		reg = 0x99;
-	else
-		reg = 0xf9;
-
-	m88rs2000_tuner_write(state, 0x60, reg);
-	reg = m88rs2000_tuner_gate_ctrl(state, 0x08);
-
-	if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-	return reg;
-}
-
-static int m88rs2000_set_tuner(struct dvb_frontend *fe, u16 *offset)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct m88rs2000_state *state = fe->demodulator_priv;
-	int ret;
-	u32 frequency = c->frequency;
-	s32 offset_khz;
-	s32 tmp;
-	u32 symbol_rate = (c->symbol_rate / 1000);
-	u32 f3db, gdiv28;
-	u16 value, ndiv, lpf_coeff;
-	u8 lpf_mxdiv, mlpf_max, mlpf_min, nlpf;
-	u8 lo = 0x01, div4 = 0x0;
-
-	/* Reset Tuner */
-	ret = m88rs2000_tab_set(state, tuner_reset);
-
-	/* Calculate frequency divider */
-	if (frequency < 1060000) {
-		lo |= 0x10;
-		div4 = 0x1;
-		ndiv = (frequency * 14 * 4) / FE_CRYSTAL_KHZ;
-	} else
-		ndiv = (frequency * 14 * 2) / FE_CRYSTAL_KHZ;
-	ndiv = ndiv + ndiv % 2;
-	ndiv = ndiv - 1024;
-
-	ret = m88rs2000_tuner_write(state, 0x10, 0x80 | lo);
-
-	/* Set frequency divider */
-	ret |= m88rs2000_tuner_write(state, 0x01, (ndiv >> 8) & 0xf);
-	ret |= m88rs2000_tuner_write(state, 0x02, ndiv & 0xff);
-
-	ret |= m88rs2000_tuner_write(state, 0x03, 0x06);
-	ret |= m88rs2000_tuner_gate_ctrl(state, 0x10);
-	if (ret < 0)
-		return -ENODEV;
-
-	/* Tuner Frequency Range */
-	ret = m88rs2000_tuner_write(state, 0x10, lo);
-
-	ret |= m88rs2000_tuner_gate_ctrl(state, 0x08);
-
-	/* Tuner RF */
-	ret |= m88rs2000_set_tuner_rf(fe);
-
-	gdiv28 = (FE_CRYSTAL_KHZ / 1000 * 1694 + 500) / 1000;
-	ret |= m88rs2000_tuner_write(state, 0x04, gdiv28 & 0xff);
-	ret |= m88rs2000_tuner_gate_ctrl(state, 0x04);
-	if (ret < 0)
-		return -ENODEV;
-
-	value = m88rs2000_tuner_read(state, 0x26);
-
-	f3db = (symbol_rate * 135) / 200 + 2000;
-	f3db += FREQ_OFFSET_LOW_SYM_RATE;
-	if (f3db < 7000)
-		f3db = 7000;
-	if (f3db > 40000)
-		f3db = 40000;
-
-	gdiv28 = gdiv28 * 207 / (value * 2 + 151);
-	mlpf_max = gdiv28 * 135 / 100;
-	mlpf_min = gdiv28 * 78 / 100;
-	if (mlpf_max > 63)
-		mlpf_max = 63;
-
-	lpf_coeff = 2766;
-
-	nlpf = (f3db * gdiv28 * 2 / lpf_coeff /
-		(FE_CRYSTAL_KHZ / 1000)  + 1) / 2;
-	if (nlpf > 23)
-		nlpf = 23;
-	if (nlpf < 1)
-		nlpf = 1;
-
-	lpf_mxdiv = (nlpf * (FE_CRYSTAL_KHZ / 1000)
-		* lpf_coeff * 2  / f3db + 1) / 2;
-
-	if (lpf_mxdiv < mlpf_min) {
-		nlpf++;
-		lpf_mxdiv = (nlpf * (FE_CRYSTAL_KHZ / 1000)
-			* lpf_coeff * 2  / f3db + 1) / 2;
-	}
-
-	if (lpf_mxdiv > mlpf_max)
-		lpf_mxdiv = mlpf_max;
-
-	ret = m88rs2000_tuner_write(state, 0x04, lpf_mxdiv);
-	ret |= m88rs2000_tuner_write(state, 0x06, nlpf);
-
-	ret |= m88rs2000_tuner_gate_ctrl(state, 0x04);
-
-	ret |= m88rs2000_tuner_gate_ctrl(state, 0x01);
-
-	msleep(80);
-	/* calculate offset assuming 96000kHz*/
-	offset_khz = (ndiv - ndiv % 2 + 1024) * FE_CRYSTAL_KHZ
-		/ 14 / (div4 + 1) / 2;
-
-	offset_khz -= frequency;
-
-	tmp = offset_khz;
-	tmp *= 65536;
-
-	tmp = (2 * tmp + 96000) / (2 * 96000);
-	if (tmp < 0)
-		tmp += 65536;
-
-	*offset = tmp & 0xffff;
-
-	if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-
-	return (ret < 0) ? -EINVAL : 0;
-}
-
-static int m88rs2000_set_fec(struct m88rs2000_state *state,
-		fe_code_rate_t fec)
-{
-	u16 fec_set;
-	switch (fec) {
-	/* This is not confirmed kept for reference */
-/*	case FEC_1_2:
-		fec_set = 0x88;
-		break;
-	case FEC_2_3:
-		fec_set = 0x68;
-		break;
-	case FEC_3_4:
-		fec_set = 0x48;
-		break;
-	case FEC_5_6:
-		fec_set = 0x28;
-		break;
-	case FEC_7_8:
-		fec_set = 0x18;
-		break; */
-	case FEC_AUTO:
-	default:
-		fec_set = 0x08;
-	}
-	m88rs2000_demod_write(state, 0x76, fec_set);
-
-	return 0;
-}
-
-
-static fe_code_rate_t m88rs2000_get_fec(struct m88rs2000_state *state)
-{
-	u8 reg;
-	m88rs2000_demod_write(state, 0x9a, 0x30);
-	reg = m88rs2000_demod_read(state, 0x76);
-	m88rs2000_demod_write(state, 0x9a, 0xb0);
-
-	switch (reg) {
-	case 0x88:
-		return FEC_1_2;
-	case 0x68:
-		return FEC_2_3;
-	case 0x48:
-		return FEC_3_4;
-	case 0x28:
-		return FEC_5_6;
-	case 0x18:
-		return FEC_7_8;
-	case 0x08:
-	default:
-		break;
-	}
-
-	return FEC_AUTO;
-}
-
-static int m88rs2000_set_frontend(struct dvb_frontend *fe)
-{
-	struct m88rs2000_state *state = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	fe_status_t status;
-	int i, ret;
-	u16 offset = 0;
-	u8 reg;
-
-	state->no_lock_count = 0;
-
-	if (c->delivery_system != SYS_DVBS) {
-			deb_info("%s: unsupported delivery "
-				"system selected (%d)\n",
-				__func__, c->delivery_system);
-			return -EOPNOTSUPP;
-	}
-
-	/* Set Tuner */
-	ret = m88rs2000_set_tuner(fe, &offset);
-	if (ret < 0)
-		return -ENODEV;
-
-	ret = m88rs2000_demod_write(state, 0x9a, 0x30);
-	/* Unknown usually 0xc6 sometimes 0xc1 */
-	reg = m88rs2000_demod_read(state, 0x86);
-	ret |= m88rs2000_demod_write(state, 0x86, reg);
-	/* Offset lower nibble always 0 */
-	ret |= m88rs2000_demod_write(state, 0x9c, (offset >> 8));
-	ret |= m88rs2000_demod_write(state, 0x9d, offset & 0xf0);
-
-
-	/* Reset Demod */
-	ret = m88rs2000_tab_set(state, fe_reset);
-	if (ret < 0)
-		return -ENODEV;
-
-	/* Unknown */
-	reg = m88rs2000_demod_read(state, 0x70);
-	ret = m88rs2000_demod_write(state, 0x70, reg);
-
-	/* Set FEC */
-	ret |= m88rs2000_set_fec(state, c->fec_inner);
-	ret |= m88rs2000_demod_write(state, 0x85, 0x1);
-	ret |= m88rs2000_demod_write(state, 0x8a, 0xbf);
-	ret |= m88rs2000_demod_write(state, 0x8d, 0x1e);
-	ret |= m88rs2000_demod_write(state, 0x90, 0xf1);
-	ret |= m88rs2000_demod_write(state, 0x91, 0x08);
-
-	if (ret < 0)
-		return -ENODEV;
-
-	/* Set Symbol Rate */
-	ret = m88rs2000_set_symbolrate(fe, c->symbol_rate);
-	if (ret < 0)
-		return -ENODEV;
-
-	/* Set up Demod */
-	ret = m88rs2000_tab_set(state, fe_trigger);
-	if (ret < 0)
-		return -ENODEV;
-
-	for (i = 0; i < 25; i++) {
-		reg = m88rs2000_demod_read(state, 0x8c);
-		if ((reg & 0x7) == 0x7) {
-			status = FE_HAS_LOCK;
-			break;
-		}
-		state->no_lock_count++;
-		if (state->no_lock_count == 15) {
-			reg = m88rs2000_demod_read(state, 0x70);
-			reg ^= 0x4;
-			m88rs2000_demod_write(state, 0x70, reg);
-			state->no_lock_count = 0;
-		}
-		if (state->no_lock_count == 20)
-			m88rs2000_set_tuner_rf(fe);
-		msleep(20);
-	}
-
-	if (status & FE_HAS_LOCK) {
-		state->fec_inner = m88rs2000_get_fec(state);
-		/* Uknown suspect SNR level */
-		reg = m88rs2000_demod_read(state, 0x65);
-	}
-
-	state->tuner_frequency = c->frequency;
-	state->symbol_rate = c->symbol_rate;
-	return 0;
-}
-
-static int m88rs2000_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct m88rs2000_state *state = fe->demodulator_priv;
-	c->fec_inner = state->fec_inner;
-	c->frequency = state->tuner_frequency;
-	c->symbol_rate = state->symbol_rate;
-	return 0;
-}
-
-static int m88rs2000_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct m88rs2000_state *state = fe->demodulator_priv;
-
-	if (enable)
-		m88rs2000_demod_write(state, 0x81, 0x84);
-	else
-		m88rs2000_demod_write(state, 0x81, 0x81);
-	udelay(10);
-	return 0;
-}
-
-static void m88rs2000_release(struct dvb_frontend *fe)
-{
-	struct m88rs2000_state *state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops m88rs2000_ops = {
-	.delsys = { SYS_DVBS },
-	.info = {
-		.name			= "M88RS2000 DVB-S",
-		.frequency_min		= 950000,
-		.frequency_max		= 2150000,
-		.frequency_stepsize	= 1000,	 /* kHz for QPSK frontends */
-		.frequency_tolerance	= 5000,
-		.symbol_rate_min	= 1000000,
-		.symbol_rate_max	= 45000000,
-		.symbol_rate_tolerance	= 500,	/* ppm */
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-		      FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
-		      FE_CAN_QPSK |
-		      FE_CAN_FEC_AUTO
-	},
-
-	.release = m88rs2000_release,
-	.init = m88rs2000_init,
-	.sleep = m88rs2000_sleep,
-	.write = m88rs2000_write,
-	.i2c_gate_ctrl = m88rs2000_i2c_gate_ctrl,
-	.read_status = m88rs2000_read_status,
-	.read_ber = m88rs2000_read_ber,
-	.read_signal_strength = m88rs2000_read_signal_strength,
-	.read_snr = m88rs2000_read_snr,
-	.read_ucblocks = m88rs2000_read_ucblocks,
-	.diseqc_send_master_cmd = m88rs2000_send_diseqc_msg,
-	.diseqc_send_burst = m88rs2000_send_diseqc_burst,
-	.set_tone = m88rs2000_set_tone,
-	.set_voltage = m88rs2000_set_voltage,
-
-	.set_frontend = m88rs2000_set_frontend,
-	.get_frontend = m88rs2000_get_frontend,
-};
-
-struct dvb_frontend *m88rs2000_attach(const struct m88rs2000_config *config,
-				    struct i2c_adapter *i2c)
-{
-	struct m88rs2000_state *state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct m88rs2000_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->tuner_frequency = 0;
-	state->symbol_rate = 0;
-	state->fec_inner = 0;
-
-	if (m88rs2000_startup(state) < 0)
-		goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &m88rs2000_ops,
-			sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-
-	return NULL;
-}
-EXPORT_SYMBOL(m88rs2000_attach);
-
-MODULE_DESCRIPTION("M88RS2000 DVB-S Demodulator driver");
-MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("1.13");
-
diff --git a/drivers/media/dvb/frontends/m88rs2000.h b/drivers/media/dvb/frontends/m88rs2000.h
deleted file mode 100644
index 59acdb6..0000000
--- a/drivers/media/dvb/frontends/m88rs2000.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
-	Driver for M88RS2000 demodulator
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef M88RS2000_H
-#define M88RS2000_H
-
-#include <linux/dvb/frontend.h>
-#include "dvb_frontend.h"
-
-struct m88rs2000_config {
-	/* Demodulator i2c address */
-	u8 demod_addr;
-	/* Tuner address */
-	u8 tuner_addr;
-
-	u8 *inittab;
-
-	/* minimum delay before retuning */
-	int min_delay_ms;
-
-	int (*set_ts_params)(struct dvb_frontend *, int);
-};
-
-enum {
-	CALL_IS_SET_FRONTEND = 0x0,
-	CALL_IS_READ,
-};
-
-#if defined(CONFIG_DVB_M88RS2000) || (defined(CONFIG_DVB_M88RS2000_MODULE) && \
-							defined(MODULE))
-extern struct dvb_frontend *m88rs2000_attach(
-	const struct m88rs2000_config *config, struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *m88rs2000_attach(
-	const struct m88rs2000_config *config, struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_M88RS2000 */
-
-#define FE_CRYSTAL_KHZ 27000
-#define FREQ_OFFSET_LOW_SYM_RATE 3000
-
-enum {
-	DEMOD_WRITE = 0x1,
-	TUNER_WRITE,
-	WRITE_DELAY = 0x10,
-};
-#endif /* M88RS2000_H */
diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c
deleted file mode 100644
index 9ae40ab..0000000
--- a/drivers/media/dvb/frontends/mb86a16.c
+++ /dev/null
@@ -1,1878 +0,0 @@
-/*
-	Fujitsu MB86A16 DVB-S/DSS DC Receiver driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "mb86a16.h"
-#include "mb86a16_priv.h"
-
-unsigned int verbose = 5;
-module_param(verbose, int, 0644);
-
-#define ABS(x)		((x) < 0 ? (-x) : (x))
-
-struct mb86a16_state {
-	struct i2c_adapter		*i2c_adap;
-	const struct mb86a16_config	*config;
-	struct dvb_frontend		frontend;
-
-	/* tuning parameters */
-	int				frequency;
-	int				srate;
-
-	/* Internal stuff */
-	int				master_clk;
-	int				deci;
-	int				csel;
-	int				rsel;
-};
-
-#define MB86A16_ERROR		0
-#define MB86A16_NOTICE		1
-#define MB86A16_INFO		2
-#define MB86A16_DEBUG		3
-
-#define dprintk(x, y, z, format, arg...) do {						\
-	if (z) {									\
-		if	((x > MB86A16_ERROR) && (x > y))				\
-			printk(KERN_ERR "%s: " format "\n", __func__, ##arg);		\
-		else if ((x > MB86A16_NOTICE) && (x > y))				\
-			printk(KERN_NOTICE "%s: " format "\n", __func__, ##arg);	\
-		else if ((x > MB86A16_INFO) && (x > y))					\
-			printk(KERN_INFO "%s: " format "\n", __func__, ##arg);		\
-		else if ((x > MB86A16_DEBUG) && (x > y))				\
-			printk(KERN_DEBUG "%s: " format "\n", __func__, ##arg);		\
-	} else {									\
-		if (x > y)								\
-			printk(format, ##arg);						\
-	}										\
-} while (0)
-
-#define TRACE_IN	dprintk(verbose, MB86A16_DEBUG, 1, "-->()")
-#define TRACE_OUT	dprintk(verbose, MB86A16_DEBUG, 1, "()-->")
-
-static int mb86a16_write(struct mb86a16_state *state, u8 reg, u8 val)
-{
-	int ret;
-	u8 buf[] = { reg, val };
-
-	struct i2c_msg msg = {
-		.addr = state->config->demod_address,
-		.flags = 0,
-		.buf = buf,
-		.len = 2
-	};
-
-	dprintk(verbose, MB86A16_DEBUG, 1,
-		"writing to [0x%02x],Reg[0x%02x],Data[0x%02x]",
-		state->config->demod_address, buf[0], buf[1]);
-
-	ret = i2c_transfer(state->i2c_adap, &msg, 1);
-
-	return (ret != 1) ? -EREMOTEIO : 0;
-}
-
-static int mb86a16_read(struct mb86a16_state *state, u8 reg, u8 *val)
-{
-	int ret;
-	u8 b0[] = { reg };
-	u8 b1[] = { 0 };
-
-	struct i2c_msg msg[] = {
-		{
-			.addr = state->config->demod_address,
-			.flags = 0,
-			.buf = b0,
-			.len = 1
-		}, {
-			.addr = state->config->demod_address,
-			.flags = I2C_M_RD,
-			.buf = b1,
-			.len = 1
-		}
-	};
-	ret = i2c_transfer(state->i2c_adap, msg, 2);
-	if (ret != 2) {
-		dprintk(verbose, MB86A16_ERROR, 1, "read error(reg=0x%02x, ret=0x%i)",
-			reg, ret);
-
-		return -EREMOTEIO;
-	}
-	*val = b1[0];
-
-	return ret;
-}
-
-static int CNTM_set(struct mb86a16_state *state,
-		    unsigned char timint1,
-		    unsigned char timint2,
-		    unsigned char cnext)
-{
-	unsigned char val;
-
-	val = (timint1 << 4) | (timint2 << 2) | cnext;
-	if (mb86a16_write(state, MB86A16_CNTMR, val) < 0)
-		goto err;
-
-	return 0;
-
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-	return -EREMOTEIO;
-}
-
-static int smrt_set(struct mb86a16_state *state, int rate)
-{
-	int tmp ;
-	int m ;
-	unsigned char STOFS0, STOFS1;
-
-	m = 1 << state->deci;
-	tmp = (8192 * state->master_clk - 2 * m * rate * 8192 + state->master_clk / 2) / state->master_clk;
-
-	STOFS0 = tmp & 0x0ff;
-	STOFS1 = (tmp & 0xf00) >> 8;
-
-	if (mb86a16_write(state, MB86A16_SRATE1, (state->deci << 2) |
-				       (state->csel << 1) |
-					state->rsel) < 0)
-		goto err;
-	if (mb86a16_write(state, MB86A16_SRATE2, STOFS0) < 0)
-		goto err;
-	if (mb86a16_write(state, MB86A16_SRATE3, STOFS1) < 0)
-		goto err;
-
-	return 0;
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-	return -1;
-}
-
-static int srst(struct mb86a16_state *state)
-{
-	if (mb86a16_write(state, MB86A16_RESET, 0x04) < 0)
-		goto err;
-
-	return 0;
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-	return -EREMOTEIO;
-
-}
-
-static int afcex_data_set(struct mb86a16_state *state,
-			  unsigned char AFCEX_L,
-			  unsigned char AFCEX_H)
-{
-	if (mb86a16_write(state, MB86A16_AFCEXL, AFCEX_L) < 0)
-		goto err;
-	if (mb86a16_write(state, MB86A16_AFCEXH, AFCEX_H) < 0)
-		goto err;
-
-	return 0;
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-
-	return -1;
-}
-
-static int afcofs_data_set(struct mb86a16_state *state,
-			   unsigned char AFCEX_L,
-			   unsigned char AFCEX_H)
-{
-	if (mb86a16_write(state, 0x58, AFCEX_L) < 0)
-		goto err;
-	if (mb86a16_write(state, 0x59, AFCEX_H) < 0)
-		goto err;
-
-	return 0;
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-	return -EREMOTEIO;
-}
-
-static int stlp_set(struct mb86a16_state *state,
-		    unsigned char STRAS,
-		    unsigned char STRBS)
-{
-	if (mb86a16_write(state, MB86A16_STRFILTCOEF1, (STRBS << 3) | (STRAS)) < 0)
-		goto err;
-
-	return 0;
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-	return -EREMOTEIO;
-}
-
-static int Vi_set(struct mb86a16_state *state, unsigned char ETH, unsigned char VIA)
-{
-	if (mb86a16_write(state, MB86A16_VISET2, 0x04) < 0)
-		goto err;
-	if (mb86a16_write(state, MB86A16_VISET3, 0xf5) < 0)
-		goto err;
-
-	return 0;
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-	return -EREMOTEIO;
-}
-
-static int initial_set(struct mb86a16_state *state)
-{
-	if (stlp_set(state, 5, 7))
-		goto err;
-
-	udelay(100);
-	if (afcex_data_set(state, 0, 0))
-		goto err;
-
-	udelay(100);
-	if (afcofs_data_set(state, 0, 0))
-		goto err;
-
-	udelay(100);
-	if (mb86a16_write(state, MB86A16_CRLFILTCOEF1, 0x16) < 0)
-		goto err;
-	if (mb86a16_write(state, 0x2f, 0x21) < 0)
-		goto err;
-	if (mb86a16_write(state, MB86A16_VIMAG, 0x38) < 0)
-		goto err;
-	if (mb86a16_write(state, MB86A16_FAGCS1, 0x00) < 0)
-		goto err;
-	if (mb86a16_write(state, MB86A16_FAGCS2, 0x1c) < 0)
-		goto err;
-	if (mb86a16_write(state, MB86A16_FAGCS3, 0x20) < 0)
-		goto err;
-	if (mb86a16_write(state, MB86A16_FAGCS4, 0x1e) < 0)
-		goto err;
-	if (mb86a16_write(state, MB86A16_FAGCS5, 0x23) < 0)
-		goto err;
-	if (mb86a16_write(state, 0x54, 0xff) < 0)
-		goto err;
-	if (mb86a16_write(state, MB86A16_TSOUT, 0x00) < 0)
-		goto err;
-
-	return 0;
-
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-	return -EREMOTEIO;
-}
-
-static int S01T_set(struct mb86a16_state *state,
-		    unsigned char s1t,
-		    unsigned s0t)
-{
-	if (mb86a16_write(state, 0x33, (s1t << 3) | s0t) < 0)
-		goto err;
-
-	return 0;
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-	return -EREMOTEIO;
-}
-
-
-static int EN_set(struct mb86a16_state *state,
-		  int cren,
-		  int afcen)
-{
-	unsigned char val;
-
-	val = 0x7a | (cren << 7) | (afcen << 2);
-	if (mb86a16_write(state, 0x49, val) < 0)
-		goto err;
-
-	return 0;
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-	return -EREMOTEIO;
-}
-
-static int AFCEXEN_set(struct mb86a16_state *state,
-		       int afcexen,
-		       int smrt)
-{
-	unsigned char AFCA ;
-
-	if (smrt > 18875)
-		AFCA = 4;
-	else if (smrt > 9375)
-		AFCA = 3;
-	else if (smrt > 2250)
-		AFCA = 2;
-	else
-		AFCA = 1;
-
-	if (mb86a16_write(state, 0x2a, 0x02 | (afcexen << 5) | (AFCA << 2)) < 0)
-		goto err;
-
-	return 0;
-
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-	return -EREMOTEIO;
-}
-
-static int DAGC_data_set(struct mb86a16_state *state,
-			 unsigned char DAGCA,
-			 unsigned char DAGCW)
-{
-	if (mb86a16_write(state, 0x2d, (DAGCA << 3) | DAGCW) < 0)
-		goto err;
-
-	return 0;
-
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-	return -EREMOTEIO;
-}
-
-static void smrt_info_get(struct mb86a16_state *state, int rate)
-{
-	if (rate >= 37501) {
-		state->deci = 0; state->csel = 0; state->rsel = 0;
-	} else if (rate >= 30001) {
-		state->deci = 0; state->csel = 0; state->rsel = 1;
-	} else if (rate >= 26251) {
-		state->deci = 0; state->csel = 1; state->rsel = 0;
-	} else if (rate >= 22501) {
-		state->deci = 0; state->csel = 1; state->rsel = 1;
-	} else if (rate >= 18751) {
-		state->deci = 1; state->csel = 0; state->rsel = 0;
-	} else if (rate >= 15001) {
-		state->deci = 1; state->csel = 0; state->rsel = 1;
-	} else if (rate >= 13126) {
-		state->deci = 1; state->csel = 1; state->rsel = 0;
-	} else if (rate >= 11251) {
-		state->deci = 1; state->csel = 1; state->rsel = 1;
-	} else if (rate >= 9376) {
-		state->deci = 2; state->csel = 0; state->rsel = 0;
-	} else if (rate >= 7501) {
-		state->deci = 2; state->csel = 0; state->rsel = 1;
-	} else if (rate >= 6563) {
-		state->deci = 2; state->csel = 1; state->rsel = 0;
-	} else if (rate >= 5626) {
-		state->deci = 2; state->csel = 1; state->rsel = 1;
-	} else if (rate >= 4688) {
-		state->deci = 3; state->csel = 0; state->rsel = 0;
-	} else if (rate >= 3751) {
-		state->deci = 3; state->csel = 0; state->rsel = 1;
-	} else if (rate >= 3282) {
-		state->deci = 3; state->csel = 1; state->rsel = 0;
-	} else if (rate >= 2814) {
-		state->deci = 3; state->csel = 1; state->rsel = 1;
-	} else if (rate >= 2344) {
-		state->deci = 4; state->csel = 0; state->rsel = 0;
-	} else if (rate >= 1876) {
-		state->deci = 4; state->csel = 0; state->rsel = 1;
-	} else if (rate >= 1641) {
-		state->deci = 4; state->csel = 1; state->rsel = 0;
-	} else if (rate >= 1407) {
-		state->deci = 4; state->csel = 1; state->rsel = 1;
-	} else if (rate >= 1172) {
-		state->deci = 5; state->csel = 0; state->rsel = 0;
-	} else if (rate >=  939) {
-		state->deci = 5; state->csel = 0; state->rsel = 1;
-	} else if (rate >=  821) {
-		state->deci = 5; state->csel = 1; state->rsel = 0;
-	} else {
-		state->deci = 5; state->csel = 1; state->rsel = 1;
-	}
-
-	if (state->csel == 0)
-		state->master_clk = 92000;
-	else
-		state->master_clk = 61333;
-
-}
-
-static int signal_det(struct mb86a16_state *state,
-		      int smrt,
-		      unsigned char *SIG)
-{
-
-	int ret ;
-	int smrtd ;
-	int wait_sym ;
-
-	u32 wait_t;
-	unsigned char S[3] ;
-	int i ;
-
-	if (*SIG > 45) {
-		if (CNTM_set(state, 2, 1, 2) < 0) {
-			dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error");
-			return -1;
-		}
-		wait_sym = 40000;
-	} else {
-		if (CNTM_set(state, 3, 1, 2) < 0) {
-			dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error");
-			return -1;
-		}
-		wait_sym = 80000;
-	}
-	for (i = 0; i < 3; i++) {
-		if (i == 0)
-			smrtd = smrt * 98 / 100;
-		else if (i == 1)
-			smrtd = smrt;
-		else
-			smrtd = smrt * 102 / 100;
-		smrt_info_get(state, smrtd);
-		smrt_set(state, smrtd);
-		srst(state);
-		wait_t = (wait_sym + 99 * smrtd / 100) / smrtd;
-		if (wait_t == 0)
-			wait_t = 1;
-		msleep_interruptible(10);
-		if (mb86a16_read(state, 0x37, &(S[i])) != 2) {
-			dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-			return -EREMOTEIO;
-		}
-	}
-	if ((S[1] > S[0] * 112 / 100) &&
-	    (S[1] > S[2] * 112 / 100)) {
-
-		ret = 1;
-	} else {
-		ret = 0;
-	}
-	*SIG = S[1];
-
-	if (CNTM_set(state, 0, 1, 2) < 0) {
-		dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error");
-		return -1;
-	}
-
-	return ret;
-}
-
-static int rf_val_set(struct mb86a16_state *state,
-		      int f,
-		      int smrt,
-		      unsigned char R)
-{
-	unsigned char C, F, B;
-	int M;
-	unsigned char rf_val[5];
-	int ack = -1;
-
-	if (smrt > 37750)
-		C = 1;
-	else if (smrt > 18875)
-		C = 2;
-	else if (smrt > 5500)
-		C = 3;
-	else
-		C = 4;
-
-	if (smrt > 30500)
-		F = 3;
-	else if (smrt > 9375)
-		F = 1;
-	else if (smrt > 4625)
-		F = 0;
-	else
-		F = 2;
-
-	if (f < 1060)
-		B = 0;
-	else if (f < 1175)
-		B = 1;
-	else if (f < 1305)
-		B = 2;
-	else if (f < 1435)
-		B = 3;
-	else if (f < 1570)
-		B = 4;
-	else if (f < 1715)
-		B = 5;
-	else if (f < 1845)
-		B = 6;
-	else if (f < 1980)
-		B = 7;
-	else if (f < 2080)
-		B = 8;
-	else
-		B = 9;
-
-	M = f * (1 << R) / 2;
-
-	rf_val[0] = 0x01 | (C << 3) | (F << 1);
-	rf_val[1] = (R << 5) | ((M & 0x1f000) >> 12);
-	rf_val[2] = (M & 0x00ff0) >> 4;
-	rf_val[3] = ((M & 0x0000f) << 4) | B;
-
-	/* Frequency Set */
-	if (mb86a16_write(state, 0x21, rf_val[0]) < 0)
-		ack = 0;
-	if (mb86a16_write(state, 0x22, rf_val[1]) < 0)
-		ack = 0;
-	if (mb86a16_write(state, 0x23, rf_val[2]) < 0)
-		ack = 0;
-	if (mb86a16_write(state, 0x24, rf_val[3]) < 0)
-		ack = 0;
-	if (mb86a16_write(state, 0x25, 0x01) < 0)
-		ack = 0;
-	if (ack == 0) {
-		dprintk(verbose, MB86A16_ERROR, 1, "RF Setup - I2C transfer error");
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int afcerr_chk(struct mb86a16_state *state)
-{
-	unsigned char AFCM_L, AFCM_H ;
-	int AFCM ;
-	int afcm, afcerr ;
-
-	if (mb86a16_read(state, 0x0e, &AFCM_L) != 2)
-		goto err;
-	if (mb86a16_read(state, 0x0f, &AFCM_H) != 2)
-		goto err;
-
-	AFCM = (AFCM_H << 8) + AFCM_L;
-
-	if (AFCM > 2048)
-		afcm = AFCM - 4096;
-	else
-		afcm = AFCM;
-	afcerr = afcm * state->master_clk / 8192;
-
-	return afcerr;
-
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-	return -EREMOTEIO;
-}
-
-static int dagcm_val_get(struct mb86a16_state *state)
-{
-	int DAGCM;
-	unsigned char DAGCM_H, DAGCM_L;
-
-	if (mb86a16_read(state, 0x45, &DAGCM_L) != 2)
-		goto err;
-	if (mb86a16_read(state, 0x46, &DAGCM_H) != 2)
-		goto err;
-
-	DAGCM = (DAGCM_H << 8) + DAGCM_L;
-
-	return DAGCM;
-
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-	return -EREMOTEIO;
-}
-
-static int mb86a16_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	u8 stat, stat2;
-	struct mb86a16_state *state = fe->demodulator_priv;
-
-	*status = 0;
-
-	if (mb86a16_read(state, MB86A16_SIG1, &stat) != 2)
-		goto err;
-	if (mb86a16_read(state, MB86A16_SIG2, &stat2) != 2)
-		goto err;
-	if ((stat > 25) && (stat2 > 25))
-		*status |= FE_HAS_SIGNAL;
-	if ((stat > 45) && (stat2 > 45))
-		*status |= FE_HAS_CARRIER;
-
-	if (mb86a16_read(state, MB86A16_STATUS, &stat) != 2)
-		goto err;
-
-	if (stat & 0x01)
-		*status |= FE_HAS_SYNC;
-	if (stat & 0x01)
-		*status |= FE_HAS_VITERBI;
-
-	if (mb86a16_read(state, MB86A16_FRAMESYNC, &stat) != 2)
-		goto err;
-
-	if ((stat & 0x0f) && (*status & FE_HAS_VITERBI))
-		*status |= FE_HAS_LOCK;
-
-	return 0;
-
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-	return -EREMOTEIO;
-}
-
-static int sync_chk(struct mb86a16_state *state,
-		    unsigned char *VIRM)
-{
-	unsigned char val;
-	int sync;
-
-	if (mb86a16_read(state, 0x0d, &val) != 2)
-		goto err;
-
-	dprintk(verbose, MB86A16_INFO, 1, "Status = %02x,", val);
-	sync = val & 0x01;
-	*VIRM = (val & 0x1c) >> 2;
-
-	return sync;
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-	return -EREMOTEIO;
-
-}
-
-static int freqerr_chk(struct mb86a16_state *state,
-		       int fTP,
-		       int smrt,
-		       int unit)
-{
-	unsigned char CRM, AFCML, AFCMH;
-	unsigned char temp1, temp2, temp3;
-	int crm, afcm, AFCM;
-	int crrerr, afcerr;		/* kHz */
-	int frqerr;			/* MHz */
-	int afcen, afcexen = 0;
-	int R, M, fOSC, fOSC_OFS;
-
-	if (mb86a16_read(state, 0x43, &CRM) != 2)
-		goto err;
-
-	if (CRM > 127)
-		crm = CRM - 256;
-	else
-		crm = CRM;
-
-	crrerr = smrt * crm / 256;
-	if (mb86a16_read(state, 0x49, &temp1) != 2)
-		goto err;
-
-	afcen = (temp1 & 0x04) >> 2;
-	if (afcen == 0) {
-		if (mb86a16_read(state, 0x2a, &temp1) != 2)
-			goto err;
-		afcexen = (temp1 & 0x20) >> 5;
-	}
-
-	if (afcen == 1) {
-		if (mb86a16_read(state, 0x0e, &AFCML) != 2)
-			goto err;
-		if (mb86a16_read(state, 0x0f, &AFCMH) != 2)
-			goto err;
-	} else if (afcexen == 1) {
-		if (mb86a16_read(state, 0x2b, &AFCML) != 2)
-			goto err;
-		if (mb86a16_read(state, 0x2c, &AFCMH) != 2)
-			goto err;
-	}
-	if ((afcen == 1) || (afcexen == 1)) {
-		smrt_info_get(state, smrt);
-		AFCM = ((AFCMH & 0x01) << 8) + AFCML;
-		if (AFCM > 255)
-			afcm = AFCM - 512;
-		else
-			afcm = AFCM;
-
-		afcerr = afcm * state->master_clk / 8192;
-	} else
-		afcerr = 0;
-
-	if (mb86a16_read(state, 0x22, &temp1) != 2)
-		goto err;
-	if (mb86a16_read(state, 0x23, &temp2) != 2)
-		goto err;
-	if (mb86a16_read(state, 0x24, &temp3) != 2)
-		goto err;
-
-	R = (temp1 & 0xe0) >> 5;
-	M = ((temp1 & 0x1f) << 12) + (temp2 << 4) + (temp3 >> 4);
-	if (R == 0)
-		fOSC = 2 * M;
-	else
-		fOSC = M;
-
-	fOSC_OFS = fOSC - fTP;
-
-	if (unit == 0) {	/* MHz */
-		if (crrerr + afcerr + fOSC_OFS * 1000 >= 0)
-			frqerr = (crrerr + afcerr + fOSC_OFS * 1000 + 500) / 1000;
-		else
-			frqerr = (crrerr + afcerr + fOSC_OFS * 1000 - 500) / 1000;
-	} else {	/* kHz */
-		frqerr = crrerr + afcerr + fOSC_OFS * 1000;
-	}
-
-	return frqerr;
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-	return -EREMOTEIO;
-}
-
-static unsigned char vco_dev_get(struct mb86a16_state *state, int smrt)
-{
-	unsigned char R;
-
-	if (smrt > 9375)
-		R = 0;
-	else
-		R = 1;
-
-	return R;
-}
-
-static void swp_info_get(struct mb86a16_state *state,
-			 int fOSC_start,
-			 int smrt,
-			 int v, int R,
-			 int swp_ofs,
-			 int *fOSC,
-			 int *afcex_freq,
-			 unsigned char *AFCEX_L,
-			 unsigned char *AFCEX_H)
-{
-	int AFCEX ;
-	int crnt_swp_freq ;
-
-	crnt_swp_freq = fOSC_start * 1000 + v * swp_ofs;
-
-	if (R == 0)
-		*fOSC = (crnt_swp_freq + 1000) / 2000 * 2;
-	else
-		*fOSC = (crnt_swp_freq + 500) / 1000;
-
-	if (*fOSC >= crnt_swp_freq)
-		*afcex_freq = *fOSC * 1000 - crnt_swp_freq;
-	else
-		*afcex_freq = crnt_swp_freq - *fOSC * 1000;
-
-	AFCEX = *afcex_freq * 8192 / state->master_clk;
-	*AFCEX_L =  AFCEX & 0x00ff;
-	*AFCEX_H = (AFCEX & 0x0f00) >> 8;
-}
-
-
-static int swp_freq_calcuation(struct mb86a16_state *state, int i, int v, int *V,  int vmax, int vmin,
-			       int SIGMIN, int fOSC, int afcex_freq, int swp_ofs, unsigned char *SIG1)
-{
-	int swp_freq ;
-
-	if ((i % 2 == 1) && (v <= vmax)) {
-		/* positive v (case 1) */
-		if ((v - 1 == vmin)				&&
-		    (*(V + 30 + v) >= 0)			&&
-		    (*(V + 30 + v - 1) >= 0)			&&
-		    (*(V + 30 + v - 1) > *(V + 30 + v))		&&
-		    (*(V + 30 + v - 1) > SIGMIN)) {
-
-			swp_freq = fOSC * 1000 + afcex_freq - swp_ofs;
-			*SIG1 = *(V + 30 + v - 1);
-		} else if ((v == vmax)				&&
-			   (*(V + 30 + v) >= 0)			&&
-			   (*(V + 30 + v - 1) >= 0)		&&
-			   (*(V + 30 + v) > *(V + 30 + v - 1))	&&
-			   (*(V + 30 + v) > SIGMIN)) {
-			/* (case 2) */
-			swp_freq = fOSC * 1000 + afcex_freq;
-			*SIG1 = *(V + 30 + v);
-		} else if ((*(V + 30 + v) > 0)			&&
-			   (*(V + 30 + v - 1) > 0)		&&
-			   (*(V + 30 + v - 2) > 0)		&&
-			   (*(V + 30 + v - 3) > 0)		&&
-			   (*(V + 30 + v - 1) > *(V + 30 + v))	&&
-			   (*(V + 30 + v - 2) > *(V + 30 + v - 3)) &&
-			   ((*(V + 30 + v - 1) > SIGMIN)	||
-			   (*(V + 30 + v - 2) > SIGMIN))) {
-			/* (case 3) */
-			if (*(V + 30 + v - 1) >= *(V + 30 + v - 2)) {
-				swp_freq = fOSC * 1000 + afcex_freq - swp_ofs;
-				*SIG1 = *(V + 30 + v - 1);
-			} else {
-				swp_freq = fOSC * 1000 + afcex_freq - swp_ofs * 2;
-				*SIG1 = *(V + 30 + v - 2);
-			}
-		} else if ((v == vmax)				&&
-			   (*(V + 30 + v) >= 0)			&&
-			   (*(V + 30 + v - 1) >= 0)		&&
-			   (*(V + 30 + v - 2) >= 0)		&&
-			   (*(V + 30 + v) > *(V + 30 + v - 2))	&&
-			   (*(V + 30 + v - 1) > *(V + 30 + v - 2)) &&
-			   ((*(V + 30 + v) > SIGMIN)		||
-			   (*(V + 30 + v - 1) > SIGMIN))) {
-			/* (case 4) */
-			if (*(V + 30 + v) >= *(V + 30 + v - 1)) {
-				swp_freq = fOSC * 1000 + afcex_freq;
-				*SIG1 = *(V + 30 + v);
-			} else {
-				swp_freq = fOSC * 1000 + afcex_freq - swp_ofs;
-				*SIG1 = *(V + 30 + v - 1);
-			}
-		} else  {
-			swp_freq = -1 ;
-		}
-	} else if ((i % 2 == 0) && (v >= vmin)) {
-		/* Negative v (case 1) */
-		if ((*(V + 30 + v) > 0)				&&
-		    (*(V + 30 + v + 1) > 0)			&&
-		    (*(V + 30 + v + 2) > 0)			&&
-		    (*(V + 30 + v + 1) > *(V + 30 + v))		&&
-		    (*(V + 30 + v + 1) > *(V + 30 + v + 2))	&&
-		    (*(V + 30 + v + 1) > SIGMIN)) {
-
-			swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
-			*SIG1 = *(V + 30 + v + 1);
-		} else if ((v + 1 == vmax)			&&
-			   (*(V + 30 + v) >= 0)			&&
-			   (*(V + 30 + v + 1) >= 0)		&&
-			   (*(V + 30 + v + 1) > *(V + 30 + v))	&&
-			   (*(V + 30 + v + 1) > SIGMIN)) {
-			/* (case 2) */
-			swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
-			*SIG1 = *(V + 30 + v);
-		} else if ((v == vmin)				&&
-			   (*(V + 30 + v) > 0)			&&
-			   (*(V + 30 + v + 1) > 0)		&&
-			   (*(V + 30 + v + 2) > 0)		&&
-			   (*(V + 30 + v) > *(V + 30 + v + 1))	&&
-			   (*(V + 30 + v) > *(V + 30 + v + 2))	&&
-			   (*(V + 30 + v) > SIGMIN)) {
-			/* (case 3) */
-			swp_freq = fOSC * 1000 + afcex_freq;
-			*SIG1 = *(V + 30 + v);
-		} else if ((*(V + 30 + v) >= 0)			&&
-			   (*(V + 30 + v + 1) >= 0)		&&
-			   (*(V + 30 + v + 2) >= 0)		&&
-			   (*(V + 30 + v + 3) >= 0)		&&
-			   (*(V + 30 + v + 1) > *(V + 30 + v))	&&
-			   (*(V + 30 + v + 2) > *(V + 30 + v + 3)) &&
-			   ((*(V + 30 + v + 1) > SIGMIN)	||
-			    (*(V + 30 + v + 2) > SIGMIN))) {
-			/* (case 4) */
-			if (*(V + 30 + v + 1) >= *(V + 30 + v + 2)) {
-				swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
-				*SIG1 = *(V + 30 + v + 1);
-			} else {
-				swp_freq = fOSC * 1000 + afcex_freq + swp_ofs * 2;
-				*SIG1 = *(V + 30 + v + 2);
-			}
-		} else if ((*(V + 30 + v) >= 0)			&&
-			   (*(V + 30 + v + 1) >= 0)		&&
-			   (*(V + 30 + v + 2) >= 0)		&&
-			   (*(V + 30 + v + 3) >= 0)		&&
-			   (*(V + 30 + v) > *(V + 30 + v + 2))	&&
-			   (*(V + 30 + v + 1) > *(V + 30 + v + 2)) &&
-			   (*(V + 30 + v) > *(V + 30 + v + 3))	&&
-			   (*(V + 30 + v + 1) > *(V + 30 + v + 3)) &&
-			   ((*(V + 30 + v) > SIGMIN)		||
-			    (*(V + 30 + v + 1) > SIGMIN))) {
-			/* (case 5) */
-			if (*(V + 30 + v) >= *(V + 30 + v + 1)) {
-				swp_freq = fOSC * 1000 + afcex_freq;
-				*SIG1 = *(V + 30 + v);
-			} else {
-				swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
-				*SIG1 = *(V + 30 + v + 1);
-			}
-		} else if ((v + 2 == vmin)			&&
-			   (*(V + 30 + v) >= 0)			&&
-			   (*(V + 30 + v + 1) >= 0)		&&
-			   (*(V + 30 + v + 2) >= 0)		&&
-			   (*(V + 30 + v + 1) > *(V + 30 + v))	&&
-			   (*(V + 30 + v + 2) > *(V + 30 + v))	&&
-			   ((*(V + 30 + v + 1) > SIGMIN)	||
-			    (*(V + 30 + v + 2) > SIGMIN))) {
-			/* (case 6) */
-			if (*(V + 30 + v + 1) >= *(V + 30 + v + 2)) {
-				swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
-				*SIG1 = *(V + 30 + v + 1);
-			} else {
-				swp_freq = fOSC * 1000 + afcex_freq + swp_ofs * 2;
-				*SIG1 = *(V + 30 + v + 2);
-			}
-		} else if ((vmax == 0) && (vmin == 0) && (*(V + 30 + v) > SIGMIN)) {
-			swp_freq = fOSC * 1000;
-			*SIG1 = *(V + 30 + v);
-		} else
-			swp_freq = -1;
-	} else
-		swp_freq = -1;
-
-	return swp_freq;
-}
-
-static void swp_info_get2(struct mb86a16_state *state,
-			  int smrt,
-			  int R,
-			  int swp_freq,
-			  int *afcex_freq,
-			  int *fOSC,
-			  unsigned char *AFCEX_L,
-			  unsigned char *AFCEX_H)
-{
-	int AFCEX ;
-
-	if (R == 0)
-		*fOSC = (swp_freq + 1000) / 2000 * 2;
-	else
-		*fOSC = (swp_freq + 500) / 1000;
-
-	if (*fOSC >= swp_freq)
-		*afcex_freq = *fOSC * 1000 - swp_freq;
-	else
-		*afcex_freq = swp_freq - *fOSC * 1000;
-
-	AFCEX = *afcex_freq * 8192 / state->master_clk;
-	*AFCEX_L =  AFCEX & 0x00ff;
-	*AFCEX_H = (AFCEX & 0x0f00) >> 8;
-}
-
-static void afcex_info_get(struct mb86a16_state *state,
-			   int afcex_freq,
-			   unsigned char *AFCEX_L,
-			   unsigned char *AFCEX_H)
-{
-	int AFCEX ;
-
-	AFCEX = afcex_freq * 8192 / state->master_clk;
-	*AFCEX_L =  AFCEX & 0x00ff;
-	*AFCEX_H = (AFCEX & 0x0f00) >> 8;
-}
-
-static int SEQ_set(struct mb86a16_state *state, unsigned char loop)
-{
-	/* SLOCK0 = 0 */
-	if (mb86a16_write(state, 0x32, 0x02 | (loop << 2)) < 0) {
-		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int iq_vt_set(struct mb86a16_state *state, unsigned char IQINV)
-{
-	/* Viterbi Rate, IQ Settings */
-	if (mb86a16_write(state, 0x06, 0xdf | (IQINV << 5)) < 0) {
-		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int FEC_srst(struct mb86a16_state *state)
-{
-	if (mb86a16_write(state, MB86A16_RESET, 0x02) < 0) {
-		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int S2T_set(struct mb86a16_state *state, unsigned char S2T)
-{
-	if (mb86a16_write(state, 0x34, 0x70 | S2T) < 0) {
-		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int S45T_set(struct mb86a16_state *state, unsigned char S4T, unsigned char S5T)
-{
-	if (mb86a16_write(state, 0x35, 0x00 | (S5T << 4) | S4T) < 0) {
-		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-
-static int mb86a16_set_fe(struct mb86a16_state *state)
-{
-	u8 agcval, cnmval;
-
-	int i, j;
-	int fOSC = 0;
-	int fOSC_start = 0;
-	int wait_t;
-	int fcp;
-	int swp_ofs;
-	int V[60];
-	u8 SIG1MIN;
-
-	unsigned char CREN, AFCEN, AFCEXEN;
-	unsigned char SIG1;
-	unsigned char TIMINT1, TIMINT2, TIMEXT;
-	unsigned char S0T, S1T;
-	unsigned char S2T;
-/*	unsigned char S2T, S3T; */
-	unsigned char S4T, S5T;
-	unsigned char AFCEX_L, AFCEX_H;
-	unsigned char R;
-	unsigned char VIRM;
-	unsigned char ETH, VIA;
-	unsigned char junk;
-
-	int loop;
-	int ftemp;
-	int v, vmax, vmin;
-	int vmax_his, vmin_his;
-	int swp_freq, prev_swp_freq[20];
-	int prev_freq_num;
-	int signal_dupl;
-	int afcex_freq;
-	int signal;
-	int afcerr;
-	int temp_freq, delta_freq;
-	int dagcm[4];
-	int smrt_d;
-/*	int freq_err; */
-	int n;
-	int ret = -1;
-	int sync;
-
-	dprintk(verbose, MB86A16_INFO, 1, "freq=%d Mhz, symbrt=%d Ksps", state->frequency, state->srate);
-
-	fcp = 3000;
-	swp_ofs = state->srate / 4;
-
-	for (i = 0; i < 60; i++)
-		V[i] = -1;
-
-	for (i = 0; i < 20; i++)
-		prev_swp_freq[i] = 0;
-
-	SIG1MIN = 25;
-
-	for (n = 0; ((n < 3) && (ret == -1)); n++) {
-		SEQ_set(state, 0);
-		iq_vt_set(state, 0);
-
-		CREN = 0;
-		AFCEN = 0;
-		AFCEXEN = 1;
-		TIMINT1 = 0;
-		TIMINT2 = 1;
-		TIMEXT = 2;
-		S1T = 0;
-		S0T = 0;
-
-		if (initial_set(state) < 0) {
-			dprintk(verbose, MB86A16_ERROR, 1, "initial set failed");
-			return -1;
-		}
-		if (DAGC_data_set(state, 3, 2) < 0) {
-			dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error");
-			return -1;
-		}
-		if (EN_set(state, CREN, AFCEN) < 0) {
-			dprintk(verbose, MB86A16_ERROR, 1, "EN set error");
-			return -1; /* (0, 0) */
-		}
-		if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) {
-			dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
-			return -1; /* (1, smrt) = (1, symbolrate) */
-		}
-		if (CNTM_set(state, TIMINT1, TIMINT2, TIMEXT) < 0) {
-			dprintk(verbose, MB86A16_ERROR, 1, "CNTM set error");
-			return -1; /* (0, 1, 2) */
-		}
-		if (S01T_set(state, S1T, S0T) < 0) {
-			dprintk(verbose, MB86A16_ERROR, 1, "S01T set error");
-			return -1; /* (0, 0) */
-		}
-		smrt_info_get(state, state->srate);
-		if (smrt_set(state, state->srate) < 0) {
-			dprintk(verbose, MB86A16_ERROR, 1, "smrt info get error");
-			return -1;
-		}
-
-		R = vco_dev_get(state, state->srate);
-		if (R == 1)
-			fOSC_start = state->frequency;
-
-		else if (R == 0) {
-			if (state->frequency % 2 == 0) {
-				fOSC_start = state->frequency;
-			} else {
-				fOSC_start = state->frequency + 1;
-				if (fOSC_start > 2150)
-					fOSC_start = state->frequency - 1;
-			}
-		}
-		loop = 1;
-		ftemp = fOSC_start * 1000;
-		vmax = 0 ;
-		while (loop == 1) {
-			ftemp = ftemp + swp_ofs;
-			vmax++;
-
-			/* Upper bound */
-			if (ftemp > 2150000) {
-				loop = 0;
-				vmax--;
-			} else {
-				if ((ftemp == 2150000) ||
-				    (ftemp - state->frequency * 1000 >= fcp + state->srate / 4))
-					loop = 0;
-			}
-		}
-
-		loop = 1;
-		ftemp = fOSC_start * 1000;
-		vmin = 0 ;
-		while (loop == 1) {
-			ftemp = ftemp - swp_ofs;
-			vmin--;
-
-			/* Lower bound */
-			if (ftemp < 950000) {
-				loop = 0;
-				vmin++;
-			} else {
-				if ((ftemp == 950000) ||
-				    (state->frequency * 1000 - ftemp >= fcp + state->srate / 4))
-					loop = 0;
-			}
-		}
-
-		wait_t = (8000 + state->srate / 2) / state->srate;
-		if (wait_t == 0)
-			wait_t = 1;
-
-		i = 0;
-		j = 0;
-		prev_freq_num = 0;
-		loop = 1;
-		signal = 0;
-		vmax_his = 0;
-		vmin_his = 0;
-		v = 0;
-
-		while (loop == 1) {
-			swp_info_get(state, fOSC_start, state->srate,
-				     v, R, swp_ofs, &fOSC,
-				     &afcex_freq, &AFCEX_L, &AFCEX_H);
-
-			udelay(100);
-			if (rf_val_set(state, fOSC, state->srate, R) < 0) {
-				dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
-				return -1;
-			}
-			udelay(100);
-			if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
-				dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
-				return -1;
-			}
-			if (srst(state) < 0) {
-				dprintk(verbose, MB86A16_ERROR, 1, "srst error");
-				return -1;
-			}
-			msleep_interruptible(wait_t);
-
-			if (mb86a16_read(state, 0x37, &SIG1) != 2) {
-				dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-				return -1;
-			}
-			V[30 + v] = SIG1 ;
-			swp_freq = swp_freq_calcuation(state, i, v, V, vmax, vmin,
-						      SIG1MIN, fOSC, afcex_freq,
-						      swp_ofs, &SIG1);	/* changed */
-
-			signal_dupl = 0;
-			for (j = 0; j < prev_freq_num; j++) {
-				if ((ABS(prev_swp_freq[j] - swp_freq)) < (swp_ofs * 3 / 2)) {
-					signal_dupl = 1;
-					dprintk(verbose, MB86A16_INFO, 1, "Probably Duplicate Signal, j = %d", j);
-				}
-			}
-			if ((signal_dupl == 0) && (swp_freq > 0) && (ABS(swp_freq - state->frequency * 1000) < fcp + state->srate / 6)) {
-				dprintk(verbose, MB86A16_DEBUG, 1, "------ Signal detect ------ [swp_freq=[%07d, srate=%05d]]", swp_freq, state->srate);
-				prev_swp_freq[prev_freq_num] = swp_freq;
-				prev_freq_num++;
-				swp_info_get2(state, state->srate, R, swp_freq,
-					      &afcex_freq, &fOSC,
-					      &AFCEX_L, &AFCEX_H);
-
-				if (rf_val_set(state, fOSC, state->srate, R) < 0) {
-					dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
-					return -1;
-				}
-				if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
-					dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
-					return -1;
-				}
-				signal = signal_det(state, state->srate, &SIG1);
-				if (signal == 1) {
-					dprintk(verbose, MB86A16_ERROR, 1, "***** Signal Found *****");
-					loop = 0;
-				} else {
-					dprintk(verbose, MB86A16_ERROR, 1, "!!!!! No signal !!!!!, try again...");
-					smrt_info_get(state, state->srate);
-					if (smrt_set(state, state->srate) < 0) {
-						dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
-						return -1;
-					}
-				}
-			}
-			if (v > vmax)
-				vmax_his = 1 ;
-			if (v < vmin)
-				vmin_his = 1 ;
-			i++;
-
-			if ((i % 2 == 1) && (vmax_his == 1))
-				i++;
-			if ((i % 2 == 0) && (vmin_his == 1))
-				i++;
-
-			if (i % 2 == 1)
-				v = (i + 1) / 2;
-			else
-				v = -i / 2;
-
-			if ((vmax_his == 1) && (vmin_his == 1))
-				loop = 0 ;
-		}
-
-		if (signal == 1) {
-			dprintk(verbose, MB86A16_INFO, 1, " Start Freq Error Check");
-			S1T = 7 ;
-			S0T = 1 ;
-			CREN = 0 ;
-			AFCEN = 1 ;
-			AFCEXEN = 0 ;
-
-			if (S01T_set(state, S1T, S0T) < 0) {
-				dprintk(verbose, MB86A16_ERROR, 1, "S01T set error");
-				return -1;
-			}
-			smrt_info_get(state, state->srate);
-			if (smrt_set(state, state->srate) < 0) {
-				dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
-				return -1;
-			}
-			if (EN_set(state, CREN, AFCEN) < 0) {
-				dprintk(verbose, MB86A16_ERROR, 1, "EN set error");
-				return -1;
-			}
-			if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) {
-				dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
-				return -1;
-			}
-			afcex_info_get(state, afcex_freq, &AFCEX_L, &AFCEX_H);
-			if (afcofs_data_set(state, AFCEX_L, AFCEX_H) < 0) {
-				dprintk(verbose, MB86A16_ERROR, 1, "AFCOFS data set error");
-				return -1;
-			}
-			if (srst(state) < 0) {
-				dprintk(verbose, MB86A16_ERROR, 1, "srst error");
-				return -1;
-			}
-			/* delay 4~200 */
-			wait_t = 200000 / state->master_clk + 200000 / state->srate;
-			msleep(wait_t);
-			afcerr = afcerr_chk(state);
-			if (afcerr == -1)
-				return -1;
-
-			swp_freq = fOSC * 1000 + afcerr ;
-			AFCEXEN = 1 ;
-			if (state->srate >= 1500)
-				smrt_d = state->srate / 3;
-			else
-				smrt_d = state->srate / 2;
-			smrt_info_get(state, smrt_d);
-			if (smrt_set(state, smrt_d) < 0) {
-				dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
-				return -1;
-			}
-			if (AFCEXEN_set(state, AFCEXEN, smrt_d) < 0) {
-				dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
-				return -1;
-			}
-			R = vco_dev_get(state, smrt_d);
-			if (DAGC_data_set(state, 2, 0) < 0) {
-				dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error");
-				return -1;
-			}
-			for (i = 0; i < 3; i++) {
-				temp_freq = swp_freq + (i - 1) * state->srate / 8;
-				swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H);
-				if (rf_val_set(state, fOSC, smrt_d, R) < 0) {
-					dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
-					return -1;
-				}
-				if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
-					dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
-					return -1;
-				}
-				wait_t = 200000 / state->master_clk + 40000 / smrt_d;
-				msleep(wait_t);
-				dagcm[i] = dagcm_val_get(state);
-			}
-			if ((dagcm[0] > dagcm[1]) &&
-			    (dagcm[0] > dagcm[2]) &&
-			    (dagcm[0] - dagcm[1] > 2 * (dagcm[2] - dagcm[1]))) {
-
-				temp_freq = swp_freq - 2 * state->srate / 8;
-				swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H);
-				if (rf_val_set(state, fOSC, smrt_d, R) < 0) {
-					dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
-					return -1;
-				}
-				if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
-					dprintk(verbose, MB86A16_ERROR, 1, "afcex data set");
-					return -1;
-				}
-				wait_t = 200000 / state->master_clk + 40000 / smrt_d;
-				msleep(wait_t);
-				dagcm[3] = dagcm_val_get(state);
-				if (dagcm[3] > dagcm[1])
-					delta_freq = (dagcm[2] - dagcm[0] + dagcm[1] - dagcm[3]) * state->srate / 300;
-				else
-					delta_freq = 0;
-			} else if ((dagcm[2] > dagcm[1]) &&
-				   (dagcm[2] > dagcm[0]) &&
-				   (dagcm[2] - dagcm[1] > 2 * (dagcm[0] - dagcm[1]))) {
-
-				temp_freq = swp_freq + 2 * state->srate / 8;
-				swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H);
-				if (rf_val_set(state, fOSC, smrt_d, R) < 0) {
-					dprintk(verbose, MB86A16_ERROR, 1, "rf val set");
-					return -1;
-				}
-				if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
-					dprintk(verbose, MB86A16_ERROR, 1, "afcex data set");
-					return -1;
-				}
-				wait_t = 200000 / state->master_clk + 40000 / smrt_d;
-				msleep(wait_t);
-				dagcm[3] = dagcm_val_get(state);
-				if (dagcm[3] > dagcm[1])
-					delta_freq = (dagcm[2] - dagcm[0] + dagcm[3] - dagcm[1]) * state->srate / 300;
-				else
-					delta_freq = 0 ;
-
-			} else {
-				delta_freq = 0 ;
-			}
-			dprintk(verbose, MB86A16_INFO, 1, "SWEEP Frequency = %d", swp_freq);
-			swp_freq += delta_freq;
-			dprintk(verbose, MB86A16_INFO, 1, "Adjusting .., DELTA Freq = %d, SWEEP Freq=%d", delta_freq, swp_freq);
-			if (ABS(state->frequency * 1000 - swp_freq) > 3800) {
-				dprintk(verbose, MB86A16_INFO, 1, "NO  --  SIGNAL !");
-			} else {
-
-				S1T = 0;
-				S0T = 3;
-				CREN = 1;
-				AFCEN = 0;
-				AFCEXEN = 1;
-
-				if (S01T_set(state, S1T, S0T) < 0) {
-					dprintk(verbose, MB86A16_ERROR, 1, "S01T set error");
-					return -1;
-				}
-				if (DAGC_data_set(state, 0, 0) < 0) {
-					dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error");
-					return -1;
-				}
-				R = vco_dev_get(state, state->srate);
-				smrt_info_get(state, state->srate);
-				if (smrt_set(state, state->srate) < 0) {
-					dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
-					return -1;
-				}
-				if (EN_set(state, CREN, AFCEN) < 0) {
-					dprintk(verbose, MB86A16_ERROR, 1, "EN set error");
-					return -1;
-				}
-				if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) {
-					dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
-					return -1;
-				}
-				swp_info_get2(state, state->srate, R, swp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H);
-				if (rf_val_set(state, fOSC, state->srate, R) < 0) {
-					dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
-					return -1;
-				}
-				if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
-					dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
-					return -1;
-				}
-				if (srst(state) < 0) {
-					dprintk(verbose, MB86A16_ERROR, 1, "srst error");
-					return -1;
-				}
-				wait_t = 7 + (10000 + state->srate / 2) / state->srate;
-				if (wait_t == 0)
-					wait_t = 1;
-				msleep_interruptible(wait_t);
-				if (mb86a16_read(state, 0x37, &SIG1) != 2) {
-					dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-					return -EREMOTEIO;
-				}
-
-				if (SIG1 > 110) {
-					S2T = 4; S4T = 1; S5T = 6; ETH = 4; VIA = 6;
-					wait_t = 7 + (917504 + state->srate / 2) / state->srate;
-				} else if (SIG1 > 105) {
-					S2T = 4; S4T = 2; S5T = 8; ETH = 7; VIA = 2;
-					wait_t = 7 + (1048576 + state->srate / 2) / state->srate;
-				} else if (SIG1 > 85) {
-					S2T = 5; S4T = 2; S5T = 8; ETH = 7; VIA = 2;
-					wait_t = 7 + (1310720 + state->srate / 2) / state->srate;
-				} else if (SIG1 > 65) {
-					S2T = 6; S4T = 2; S5T = 8; ETH = 7; VIA = 2;
-					wait_t = 7 + (1572864 + state->srate / 2) / state->srate;
-				} else {
-					S2T = 7; S4T = 2; S5T = 8; ETH = 7; VIA = 2;
-					wait_t = 7 + (2097152 + state->srate / 2) / state->srate;
-				}
-				wait_t *= 2; /* FOS */
-				S2T_set(state, S2T);
-				S45T_set(state, S4T, S5T);
-				Vi_set(state, ETH, VIA);
-				srst(state);
-				msleep_interruptible(wait_t);
-				sync = sync_chk(state, &VIRM);
-				dprintk(verbose, MB86A16_INFO, 1, "-------- Viterbi=[%d] SYNC=[%d] ---------", VIRM, sync);
-				if (VIRM) {
-					if (VIRM == 4) {
-						/* 5/6 */
-						if (SIG1 > 110)
-							wait_t = (786432 + state->srate / 2) / state->srate;
-						else
-							wait_t = (1572864 + state->srate / 2) / state->srate;
-						if (state->srate < 5000)
-							/* FIXME ! , should be a long wait ! */
-							msleep_interruptible(wait_t);
-						else
-							msleep_interruptible(wait_t);
-
-						if (sync_chk(state, &junk) == 0) {
-							iq_vt_set(state, 1);
-							FEC_srst(state);
-						}
-					}
-					/* 1/2, 2/3, 3/4, 7/8 */
-					if (SIG1 > 110)
-						wait_t = (786432 + state->srate / 2) / state->srate;
-					else
-						wait_t = (1572864 + state->srate / 2) / state->srate;
-					msleep_interruptible(wait_t);
-					SEQ_set(state, 1);
-				} else {
-					dprintk(verbose, MB86A16_INFO, 1, "NO  -- SYNC");
-					SEQ_set(state, 1);
-					ret = -1;
-				}
-			}
-		} else {
-			dprintk(verbose, MB86A16_INFO, 1, "NO  -- SIGNAL");
-			ret = -1;
-		}
-
-		sync = sync_chk(state, &junk);
-		if (sync) {
-			dprintk(verbose, MB86A16_INFO, 1, "******* SYNC *******");
-			freqerr_chk(state, state->frequency, state->srate, 1);
-			ret = 0;
-			break;
-		}
-	}
-
-	mb86a16_read(state, 0x15, &agcval);
-	mb86a16_read(state, 0x26, &cnmval);
-	dprintk(verbose, MB86A16_INFO, 1, "AGC = %02x CNM = %02x", agcval, cnmval);
-
-	return ret;
-}
-
-static int mb86a16_send_diseqc_msg(struct dvb_frontend *fe,
-				   struct dvb_diseqc_master_cmd *cmd)
-{
-	struct mb86a16_state *state = fe->demodulator_priv;
-	int i;
-	u8 regs;
-
-	if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA) < 0)
-		goto err;
-	if (mb86a16_write(state, MB86A16_DCCOUT, 0x00) < 0)
-		goto err;
-	if (mb86a16_write(state, MB86A16_TONEOUT2, 0x04) < 0)
-		goto err;
-
-	regs = 0x18;
-
-	if (cmd->msg_len > 5 || cmd->msg_len < 4)
-		return -EINVAL;
-
-	for (i = 0; i < cmd->msg_len; i++) {
-		if (mb86a16_write(state, regs, cmd->msg[i]) < 0)
-			goto err;
-
-		regs++;
-	}
-	i += 0x90;
-
-	msleep_interruptible(10);
-
-	if (mb86a16_write(state, MB86A16_DCC1, i) < 0)
-		goto err;
-	if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0)
-		goto err;
-
-	return 0;
-
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-	return -EREMOTEIO;
-}
-
-static int mb86a16_send_diseqc_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t burst)
-{
-	struct mb86a16_state *state = fe->demodulator_priv;
-
-	switch (burst) {
-	case SEC_MINI_A:
-		if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA |
-						       MB86A16_DCC1_TBEN  |
-						       MB86A16_DCC1_TBO) < 0)
-			goto err;
-		if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0)
-			goto err;
-		break;
-	case SEC_MINI_B:
-		if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA |
-						       MB86A16_DCC1_TBEN) < 0)
-			goto err;
-		if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0)
-			goto err;
-		break;
-	}
-
-	return 0;
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-	return -EREMOTEIO;
-}
-
-static int mb86a16_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
-{
-	struct mb86a16_state *state = fe->demodulator_priv;
-
-	switch (tone) {
-	case SEC_TONE_ON:
-		if (mb86a16_write(state, MB86A16_TONEOUT2, 0x00) < 0)
-			goto err;
-		if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA |
-						       MB86A16_DCC1_CTOE) < 0)
-
-			goto err;
-		if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0)
-			goto err;
-		break;
-	case SEC_TONE_OFF:
-		if (mb86a16_write(state, MB86A16_TONEOUT2, 0x04) < 0)
-			goto err;
-		if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA) < 0)
-			goto err;
-		if (mb86a16_write(state, MB86A16_DCCOUT, 0x00) < 0)
-			goto err;
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-	return -EREMOTEIO;
-}
-
-static enum dvbfe_search mb86a16_search(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct mb86a16_state *state = fe->demodulator_priv;
-
-	state->frequency = p->frequency / 1000;
-	state->srate = p->symbol_rate / 1000;
-
-	if (!mb86a16_set_fe(state)) {
-		dprintk(verbose, MB86A16_ERROR, 1, "Successfully acquired LOCK");
-		return DVBFE_ALGO_SEARCH_SUCCESS;
-	}
-
-	dprintk(verbose, MB86A16_ERROR, 1, "Lock acquisition failed!");
-	return DVBFE_ALGO_SEARCH_FAILED;
-}
-
-static void mb86a16_release(struct dvb_frontend *fe)
-{
-	struct mb86a16_state *state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static int mb86a16_init(struct dvb_frontend *fe)
-{
-	return 0;
-}
-
-static int mb86a16_sleep(struct dvb_frontend *fe)
-{
-	return 0;
-}
-
-static int mb86a16_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	u8 ber_mon, ber_tab, ber_lsb, ber_mid, ber_msb, ber_tim, ber_rst;
-	u32 timer;
-
-	struct mb86a16_state *state = fe->demodulator_priv;
-
-	*ber = 0;
-	if (mb86a16_read(state, MB86A16_BERMON, &ber_mon) != 2)
-		goto err;
-	if (mb86a16_read(state, MB86A16_BERTAB, &ber_tab) != 2)
-		goto err;
-	if (mb86a16_read(state, MB86A16_BERLSB, &ber_lsb) != 2)
-		goto err;
-	if (mb86a16_read(state, MB86A16_BERMID, &ber_mid) != 2)
-		goto err;
-	if (mb86a16_read(state, MB86A16_BERMSB, &ber_msb) != 2)
-		goto err;
-	/* BER monitor invalid when BER_EN = 0	*/
-	if (ber_mon & 0x04) {
-		/* coarse, fast calculation	*/
-		*ber = ber_tab & 0x1f;
-		dprintk(verbose, MB86A16_DEBUG, 1, "BER coarse=[0x%02x]", *ber);
-		if (ber_mon & 0x01) {
-			/*
-			 * BER_SEL = 1, The monitored BER is the estimated
-			 * value with a Reed-Solomon decoder error amount at
-			 * the deinterleaver output.
-			 * monitored BER is expressed as a 20 bit output in total
-			 */
-			ber_rst = ber_mon >> 3;
-			*ber = (((ber_msb << 8) | ber_mid) << 8) | ber_lsb;
-			if (ber_rst == 0)
-				timer =  12500000;
-			if (ber_rst == 1)
-				timer =  25000000;
-			if (ber_rst == 2)
-				timer =  50000000;
-			if (ber_rst == 3)
-				timer = 100000000;
-
-			*ber /= timer;
-			dprintk(verbose, MB86A16_DEBUG, 1, "BER fine=[0x%02x]", *ber);
-		} else {
-			/*
-			 * BER_SEL = 0, The monitored BER is the estimated
-			 * value with a Viterbi decoder error amount at the
-			 * QPSK demodulator output.
-			 * monitored BER is expressed as a 24 bit output in total
-			 */
-			ber_tim = ber_mon >> 1;
-			*ber = (((ber_msb << 8) | ber_mid) << 8) | ber_lsb;
-			if (ber_tim == 0)
-				timer = 16;
-			if (ber_tim == 1)
-				timer = 24;
-
-			*ber /= 2 ^ timer;
-			dprintk(verbose, MB86A16_DEBUG, 1, "BER fine=[0x%02x]", *ber);
-		}
-	}
-	return 0;
-err:
-	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-	return -EREMOTEIO;
-}
-
-static int mb86a16_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	u8 agcm = 0;
-	struct mb86a16_state *state = fe->demodulator_priv;
-
-	*strength = 0;
-	if (mb86a16_read(state, MB86A16_AGCM, &agcm) != 2) {
-		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-		return -EREMOTEIO;
-	}
-
-	*strength = ((0xff - agcm) * 100) / 256;
-	dprintk(verbose, MB86A16_DEBUG, 1, "Signal strength=[%d %%]", (u8) *strength);
-	*strength = (0xffff - 0xff) + agcm;
-
-	return 0;
-}
-
-struct cnr {
-	u8 cn_reg;
-	u8 cn_val;
-};
-
-static const struct cnr cnr_tab[] = {
-	{  35,  2 },
-	{  40,  3 },
-	{  50,  4 },
-	{  60,  5 },
-	{  70,  6 },
-	{  80,  7 },
-	{  92,  8 },
-	{ 103,  9 },
-	{ 115, 10 },
-	{ 138, 12 },
-	{ 162, 15 },
-	{ 180, 18 },
-	{ 185, 19 },
-	{ 189, 20 },
-	{ 195, 22 },
-	{ 199, 24 },
-	{ 201, 25 },
-	{ 202, 26 },
-	{ 203, 27 },
-	{ 205, 28 },
-	{ 208, 30 }
-};
-
-static int mb86a16_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct mb86a16_state *state = fe->demodulator_priv;
-	int i = 0;
-	int low_tide = 2, high_tide = 30, q_level;
-	u8  cn;
-
-	*snr = 0;
-	if (mb86a16_read(state, 0x26, &cn) != 2) {
-		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-		return -EREMOTEIO;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(cnr_tab); i++) {
-		if (cn < cnr_tab[i].cn_reg) {
-			*snr = cnr_tab[i].cn_val;
-			break;
-		}
-	}
-	q_level = (*snr * 100) / (high_tide - low_tide);
-	dprintk(verbose, MB86A16_ERROR, 1, "SNR (Quality) = [%d dB], Level=%d %%", *snr, q_level);
-	*snr = (0xffff - 0xff) + *snr;
-
-	return 0;
-}
-
-static int mb86a16_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	u8 dist;
-	struct mb86a16_state *state = fe->demodulator_priv;
-
-	if (mb86a16_read(state, MB86A16_DISTMON, &dist) != 2) {
-		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
-		return -EREMOTEIO;
-	}
-	*ucblocks = dist;
-
-	return 0;
-}
-
-static enum dvbfe_algo mb86a16_frontend_algo(struct dvb_frontend *fe)
-{
-	return DVBFE_ALGO_CUSTOM;
-}
-
-static struct dvb_frontend_ops mb86a16_ops = {
-	.delsys = { SYS_DVBS },
-	.info = {
-		.name			= "Fujitsu MB86A16 DVB-S",
-		.frequency_min		= 950000,
-		.frequency_max		= 2150000,
-		.frequency_stepsize	= 3000,
-		.frequency_tolerance	= 0,
-		.symbol_rate_min	= 1000000,
-		.symbol_rate_max	= 45000000,
-		.symbol_rate_tolerance	= 500,
-		.caps			= FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
-					  FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 |
-					  FE_CAN_FEC_7_8 | FE_CAN_QPSK    |
-					  FE_CAN_FEC_AUTO
-	},
-	.release			= mb86a16_release,
-
-	.get_frontend_algo		= mb86a16_frontend_algo,
-	.search				= mb86a16_search,
-	.init				= mb86a16_init,
-	.sleep				= mb86a16_sleep,
-	.read_status			= mb86a16_read_status,
-
-	.read_ber			= mb86a16_read_ber,
-	.read_signal_strength		= mb86a16_read_signal_strength,
-	.read_snr			= mb86a16_read_snr,
-	.read_ucblocks			= mb86a16_read_ucblocks,
-
-	.diseqc_send_master_cmd		= mb86a16_send_diseqc_msg,
-	.diseqc_send_burst		= mb86a16_send_diseqc_burst,
-	.set_tone			= mb86a16_set_tone,
-};
-
-struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config,
-				    struct i2c_adapter *i2c_adap)
-{
-	u8 dev_id = 0;
-	struct mb86a16_state *state = NULL;
-
-	state = kmalloc(sizeof(struct mb86a16_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	state->config = config;
-	state->i2c_adap = i2c_adap;
-
-	mb86a16_read(state, 0x7f, &dev_id);
-	if (dev_id != 0xfe)
-		goto error;
-
-	memcpy(&state->frontend.ops, &mb86a16_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	state->frontend.ops.set_voltage = state->config->set_voltage;
-
-	return &state->frontend;
-error:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(mb86a16_attach);
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Manu Abraham");
diff --git a/drivers/media/dvb/frontends/mb86a16.h b/drivers/media/dvb/frontends/mb86a16.h
deleted file mode 100644
index 6ea8c37..0000000
--- a/drivers/media/dvb/frontends/mb86a16.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
-	Fujitsu MB86A16 DVB-S/DSS DC Receiver driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MB86A16_H
-#define __MB86A16_H
-
-#include <linux/dvb/frontend.h>
-#include "dvb_frontend.h"
-
-
-struct mb86a16_config {
-	u8 demod_address;
-
-	int (*set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage);
-};
-
-
-
-#if defined(CONFIG_DVB_MB86A16) || (defined(CONFIG_DVB_MB86A16_MODULE) && defined(MODULE))
-
-extern struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config,
-					   struct i2c_adapter *i2c_adap);
-
-#else
-
-static inline struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config,
-					   struct i2c_adapter *i2c_adap)
-{
-	printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-#endif /* CONFIG_DVB_MB86A16 */
-
-#endif /* __MB86A16_H */
diff --git a/drivers/media/dvb/frontends/mb86a16_priv.h b/drivers/media/dvb/frontends/mb86a16_priv.h
deleted file mode 100644
index 360a35a..0000000
--- a/drivers/media/dvb/frontends/mb86a16_priv.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
-	Fujitsu MB86A16 DVB-S/DSS DC Receiver driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MB86A16_PRIV_H
-#define __MB86A16_PRIV_H
-
-#define MB86A16_TSOUT		0x00
-#define MB86A16_TSOUT_HIZSEL	(0x01 << 5)
-#define MB86A16_TSOUT_HIZCNTI	(0x01 << 4)
-#define MB86A16_TSOUT_MODE	(0x01 << 3)
-#define MB86A16_TSOUT_ORDER	(0x01 << 2)
-#define MB86A16_TSOUT_ERROR	(0x01 << 1)
-#define Mb86A16_TSOUT_EDGE	(0x01 << 0)
-
-#define MB86A16_FEC		0x01
-#define MB86A16_FEC_FSYNC	(0x01 << 5)
-#define MB86A16_FEC_PCKB8	(0x01 << 4)
-#define MB86A16_FEC_DVDS	(0x01 << 3)
-#define MB86A16_FEC_EREN	(0x01 << 2)
-#define Mb86A16_FEC_RSEN	(0x01 << 1)
-#define MB86A16_FEC_DIEN	(0x01 << 0)
-
-#define MB86A16_AGC		0x02
-#define MB86A16_AGC_AGMD	(0x01 << 6)
-#define MB86A16_AGC_AGCW	(0x0f << 2)
-#define MB86A16_AGC_AGCP	(0x01 << 1)
-#define MB86A16_AGC_AGCR	(0x01 << 0)
-
-#define MB86A16_SRATE1		0x03
-#define MB86A16_SRATE1_DECI	(0x07 << 2)
-#define MB86A16_SRATE1_CSEL	(0x01 << 1)
-#define MB86A16_SRATE1_RSEL	(0x01 << 0)
-
-#define MB86A16_SRATE2		0x04
-#define MB86A16_SRATE2_STOFSL	(0xff << 0)
-
-#define MB86A16_SRATE3		0x05
-#define MB86A16_SRATE2_STOFSH	(0xff << 0)
-
-#define MB86A16_VITERBI		0x06
-#define MB86A16_FRAMESYNC	0x07
-#define MB86A16_CRLFILTCOEF1	0x08
-#define MB86A16_CRLFILTCOEF2	0x09
-#define MB86A16_STRFILTCOEF1	0x0a
-#define MB86A16_STRFILTCOEF2	0x0b
-#define MB86A16_RESET		0x0c
-#define MB86A16_STATUS		0x0d
-#define MB86A16_AFCML		0x0e
-#define MB86A16_AFCMH		0x0f
-#define MB86A16_BERMON		0x10
-#define MB86A16_BERTAB		0x11
-#define MB86A16_BERLSB		0x12
-#define MB86A16_BERMID		0x13
-#define MB86A16_BERMSB		0x14
-#define MB86A16_AGCM		0x15
-
-#define MB86A16_DCC1		0x16
-#define MB86A16_DCC1_DISTA	(0x01 << 7)
-#define MB86A16_DCC1_PRTY	(0x01 << 6)
-#define MB86A16_DCC1_CTOE	(0x01 << 5)
-#define MB86A16_DCC1_TBEN	(0x01 << 4)
-#define MB86A16_DCC1_TBO	(0x01 << 3)
-#define MB86A16_DCC1_NUM	(0x07 << 0)
-
-#define MB86A16_DCC2		0x17
-#define MB86A16_DCC2_DCBST	(0x01 << 0)
-
-#define MB86A16_DCC3		0x18
-#define MB86A16_DCC3_CODE0	(0xff << 0)
-
-#define MB86A16_DCC4		0x19
-#define MB86A16_DCC4_CODE1	(0xff << 0)
-
-#define MB86A16_DCC5		0x1a
-#define MB86A16_DCC5_CODE2	(0xff << 0)
-
-#define MB86A16_DCC6		0x1b
-#define MB86A16_DCC6_CODE3	(0xff << 0)
-
-#define MB86A16_DCC7		0x1c
-#define MB86A16_DCC7_CODE4	(0xff << 0)
-
-#define MB86A16_DCC8		0x1d
-#define MB86A16_DCC8_CODE5	(0xff << 0)
-
-#define MB86A16_DCCOUT		0x1e
-#define MB86A16_DCCOUT_DISEN	(0x01 << 0)
-
-#define MB86A16_TONEOUT1	0x1f
-#define MB86A16_TONE_TDIVL	(0xff << 0)
-
-#define MB86A16_TONEOUT2	0x20
-#define MB86A16_TONE_TMD	(0x03 << 2)
-#define MB86A16_TONE_TDIVH	(0x03 << 0)
-
-#define MB86A16_FREQ1		0x21
-#define MB86A16_FREQ2		0x22
-#define MB86A16_FREQ3		0x23
-#define MB86A16_FREQ4		0x24
-#define MB86A16_FREQSET		0x25
-#define MB86A16_CNM		0x26
-#define MB86A16_PORT0		0x27
-#define MB86A16_PORT1		0x28
-#define MB86A16_DRCFILT		0x29
-#define MB86A16_AFC		0x2a
-#define MB86A16_AFCEXL		0x2b
-#define MB86A16_AFCEXH		0x2c
-#define MB86A16_DAGC		0x2d
-#define MB86A16_SEQMODE		0x32
-#define MB86A16_S0S1T		0x33
-#define MB86A16_S2S3T		0x34
-#define MB86A16_S4S5T		0x35
-#define MB86A16_CNTMR		0x36
-#define MB86A16_SIG1		0x37
-#define MB86A16_SIG2		0x38
-#define MB86A16_VIMAG		0x39
-#define MB86A16_VISET1		0x3a
-#define MB86A16_VISET2		0x3b
-#define MB86A16_VISET3		0x3c
-#define MB86A16_FAGCS1		0x3d
-#define MB86A16_FAGCS2		0x3e
-#define MB86A16_FAGCS3		0x3f
-#define MB86A16_FAGCS4		0x40
-#define MB86A16_FAGCS5		0x41
-#define MB86A16_FAGCS6		0x42
-#define MB86A16_CRM		0x43
-#define MB86A16_STRM		0x44
-#define MB86A16_DAGCML		0x45
-#define MB86A16_DAGCMH		0x46
-#define MB86A16_QPSKTST		0x49
-#define MB86A16_DISTMON		0x52
-#define MB86A16_VERSION		0x7f
-
-#endif /* __MB86A16_PRIV_H */
diff --git a/drivers/media/dvb/frontends/mb86a20s.c b/drivers/media/dvb/frontends/mb86a20s.c
deleted file mode 100644
index fade566..0000000
--- a/drivers/media/dvb/frontends/mb86a20s.c
+++ /dev/null
@@ -1,701 +0,0 @@
-/*
- *   Fujitu mb86a20s ISDB-T/ISDB-Tsb Module driver
- *
- *   Copyright (C) 2010 Mauro Carvalho Chehab <mchehab@redhat.com>
- *   Copyright (C) 2009-2010 Douglas Landgraf <dougsland@redhat.com>
- *
- *   FIXME: Need to port to DVB v5.2 API
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License as
- *   published by the Free Software Foundation version 2.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *   General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <asm/div64.h>
-
-#include "dvb_frontend.h"
-#include "mb86a20s.h"
-
-static int debug = 1;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
-
-#define rc(args...)  do {						\
-	printk(KERN_ERR  "mb86a20s: " args);				\
-} while (0)
-
-#define dprintk(args...)						\
-	do {								\
-		if (debug) {						\
-			printk(KERN_DEBUG "mb86a20s: %s: ", __func__);	\
-			printk(args);					\
-		}							\
-	} while (0)
-
-struct mb86a20s_state {
-	struct i2c_adapter *i2c;
-	const struct mb86a20s_config *config;
-
-	struct dvb_frontend frontend;
-
-	bool need_init;
-};
-
-struct regdata {
-	u8 reg;
-	u8 data;
-};
-
-/*
- * Initialization sequence: Use whatevere default values that PV SBTVD
- * does on its initialisation, obtained via USB snoop
- */
-static struct regdata mb86a20s_init[] = {
-	{ 0x70, 0x0f },
-	{ 0x70, 0xff },
-	{ 0x08, 0x01 },
-	{ 0x09, 0x3e },
-	{ 0x50, 0xd1 }, { 0x51, 0x22 },
-	{ 0x39, 0x01 },
-	{ 0x71, 0x00 },
-	{ 0x28, 0x2a }, { 0x29, 0x00 }, { 0x2a, 0xff }, { 0x2b, 0x80 },
-	{ 0x28, 0x20 }, { 0x29, 0x33 }, { 0x2a, 0xdf }, { 0x2b, 0xa9 },
-	{ 0x28, 0x22 }, { 0x29, 0x00 }, { 0x2a, 0x1f }, { 0x2b, 0xf0 },
-	{ 0x3b, 0x21 },
-	{ 0x3c, 0x3a },
-	{ 0x01, 0x0d },
-	{ 0x04, 0x08 }, { 0x05, 0x05 },
-	{ 0x04, 0x0e }, { 0x05, 0x00 },
-	{ 0x04, 0x0f }, { 0x05, 0x14 },
-	{ 0x04, 0x0b }, { 0x05, 0x8c },
-	{ 0x04, 0x00 }, { 0x05, 0x00 },
-	{ 0x04, 0x01 }, { 0x05, 0x07 },
-	{ 0x04, 0x02 }, { 0x05, 0x0f },
-	{ 0x04, 0x03 }, { 0x05, 0xa0 },
-	{ 0x04, 0x09 }, { 0x05, 0x00 },
-	{ 0x04, 0x0a }, { 0x05, 0xff },
-	{ 0x04, 0x27 }, { 0x05, 0x64 },
-	{ 0x04, 0x28 }, { 0x05, 0x00 },
-	{ 0x04, 0x1e }, { 0x05, 0xff },
-	{ 0x04, 0x29 }, { 0x05, 0x0a },
-	{ 0x04, 0x32 }, { 0x05, 0x0a },
-	{ 0x04, 0x14 }, { 0x05, 0x02 },
-	{ 0x04, 0x04 }, { 0x05, 0x00 },
-	{ 0x04, 0x05 }, { 0x05, 0x22 },
-	{ 0x04, 0x06 }, { 0x05, 0x0e },
-	{ 0x04, 0x07 }, { 0x05, 0xd8 },
-	{ 0x04, 0x12 }, { 0x05, 0x00 },
-	{ 0x04, 0x13 }, { 0x05, 0xff },
-	{ 0x04, 0x15 }, { 0x05, 0x4e },
-	{ 0x04, 0x16 }, { 0x05, 0x20 },
-	{ 0x52, 0x01 },
-	{ 0x50, 0xa7 }, { 0x51, 0xff },
-	{ 0x50, 0xa8 }, { 0x51, 0xff },
-	{ 0x50, 0xa9 }, { 0x51, 0xff },
-	{ 0x50, 0xaa }, { 0x51, 0xff },
-	{ 0x50, 0xab }, { 0x51, 0xff },
-	{ 0x50, 0xac }, { 0x51, 0xff },
-	{ 0x50, 0xad }, { 0x51, 0xff },
-	{ 0x50, 0xae }, { 0x51, 0xff },
-	{ 0x50, 0xaf }, { 0x51, 0xff },
-	{ 0x5e, 0x07 },
-	{ 0x50, 0xdc }, { 0x51, 0x01 },
-	{ 0x50, 0xdd }, { 0x51, 0xf4 },
-	{ 0x50, 0xde }, { 0x51, 0x01 },
-	{ 0x50, 0xdf }, { 0x51, 0xf4 },
-	{ 0x50, 0xe0 }, { 0x51, 0x01 },
-	{ 0x50, 0xe1 }, { 0x51, 0xf4 },
-	{ 0x50, 0xb0 }, { 0x51, 0x07 },
-	{ 0x50, 0xb2 }, { 0x51, 0xff },
-	{ 0x50, 0xb3 }, { 0x51, 0xff },
-	{ 0x50, 0xb4 }, { 0x51, 0xff },
-	{ 0x50, 0xb5 }, { 0x51, 0xff },
-	{ 0x50, 0xb6 }, { 0x51, 0xff },
-	{ 0x50, 0xb7 }, { 0x51, 0xff },
-	{ 0x50, 0x50 }, { 0x51, 0x02 },
-	{ 0x50, 0x51 }, { 0x51, 0x04 },
-	{ 0x45, 0x04 },
-	{ 0x48, 0x04 },
-	{ 0x50, 0xd5 }, { 0x51, 0x01 },		/* Serial */
-	{ 0x50, 0xd6 }, { 0x51, 0x1f },
-	{ 0x50, 0xd2 }, { 0x51, 0x03 },
-	{ 0x50, 0xd7 }, { 0x51, 0x3f },
-	{ 0x28, 0x74 }, { 0x29, 0x00 }, { 0x28, 0x74 }, { 0x29, 0x40 },
-	{ 0x28, 0x46 }, { 0x29, 0x2c }, { 0x28, 0x46 }, { 0x29, 0x0c },
-	{ 0x04, 0x40 }, { 0x05, 0x01 },
-	{ 0x28, 0x00 }, { 0x29, 0x10 },
-	{ 0x28, 0x05 }, { 0x29, 0x02 },
-	{ 0x1c, 0x01 },
-	{ 0x28, 0x06 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x03 },
-	{ 0x28, 0x07 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x0d },
-	{ 0x28, 0x08 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x02 },
-	{ 0x28, 0x09 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x01 },
-	{ 0x28, 0x0a }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x21 },
-	{ 0x28, 0x0b }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x29 },
-	{ 0x28, 0x0c }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x16 },
-	{ 0x28, 0x0d }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x31 },
-	{ 0x28, 0x0e }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x0e },
-	{ 0x28, 0x0f }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x4e },
-	{ 0x28, 0x10 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x46 },
-	{ 0x28, 0x11 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x0f },
-	{ 0x28, 0x12 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x56 },
-	{ 0x28, 0x13 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x35 },
-	{ 0x28, 0x14 }, { 0x29, 0x00 }, { 0x2a, 0x01 }, { 0x2b, 0xbe },
-	{ 0x28, 0x15 }, { 0x29, 0x00 }, { 0x2a, 0x01 }, { 0x2b, 0x84 },
-	{ 0x28, 0x16 }, { 0x29, 0x00 }, { 0x2a, 0x03 }, { 0x2b, 0xee },
-	{ 0x28, 0x17 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x98 },
-	{ 0x28, 0x18 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x9f },
-	{ 0x28, 0x19 }, { 0x29, 0x00 }, { 0x2a, 0x07 }, { 0x2b, 0xb2 },
-	{ 0x28, 0x1a }, { 0x29, 0x00 }, { 0x2a, 0x06 }, { 0x2b, 0xc2 },
-	{ 0x28, 0x1b }, { 0x29, 0x00 }, { 0x2a, 0x07 }, { 0x2b, 0x4a },
-	{ 0x28, 0x1c }, { 0x29, 0x00 }, { 0x2a, 0x01 }, { 0x2b, 0xbc },
-	{ 0x28, 0x1d }, { 0x29, 0x00 }, { 0x2a, 0x04 }, { 0x2b, 0xba },
-	{ 0x28, 0x1e }, { 0x29, 0x00 }, { 0x2a, 0x06 }, { 0x2b, 0x14 },
-	{ 0x50, 0x1e }, { 0x51, 0x5d },
-	{ 0x50, 0x22 }, { 0x51, 0x00 },
-	{ 0x50, 0x23 }, { 0x51, 0xc8 },
-	{ 0x50, 0x24 }, { 0x51, 0x00 },
-	{ 0x50, 0x25 }, { 0x51, 0xf0 },
-	{ 0x50, 0x26 }, { 0x51, 0x00 },
-	{ 0x50, 0x27 }, { 0x51, 0xc3 },
-	{ 0x50, 0x39 }, { 0x51, 0x02 },
-	{ 0x28, 0x6a }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x00 },
-	{ 0xd0, 0x00 },
-};
-
-static struct regdata mb86a20s_reset_reception[] = {
-	{ 0x70, 0xf0 },
-	{ 0x70, 0xff },
-	{ 0x08, 0x01 },
-	{ 0x08, 0x00 },
-};
-
-static int mb86a20s_i2c_writereg(struct mb86a20s_state *state,
-			     u8 i2c_addr, int reg, int data)
-{
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg = {
-		.addr = i2c_addr, .flags = 0, .buf = buf, .len = 2
-	};
-	int rc;
-
-	rc = i2c_transfer(state->i2c, &msg, 1);
-	if (rc != 1) {
-		printk("%s: writereg error (rc == %i, reg == 0x%02x,"
-			 " data == 0x%02x)\n", __func__, rc, reg, data);
-		return rc;
-	}
-
-	return 0;
-}
-
-static int mb86a20s_i2c_writeregdata(struct mb86a20s_state *state,
-				     u8 i2c_addr, struct regdata *rd, int size)
-{
-	int i, rc;
-
-	for (i = 0; i < size; i++) {
-		rc = mb86a20s_i2c_writereg(state, i2c_addr, rd[i].reg,
-					   rd[i].data);
-		if (rc < 0)
-			return rc;
-	}
-	return 0;
-}
-
-static int mb86a20s_i2c_readreg(struct mb86a20s_state *state,
-				u8 i2c_addr, u8 reg)
-{
-	u8 val;
-	int rc;
-	struct i2c_msg msg[] = {
-		{ .addr = i2c_addr, .flags = 0, .buf = &reg, .len = 1 },
-		{ .addr = i2c_addr, .flags = I2C_M_RD, .buf = &val, .len = 1 }
-	};
-
-	rc = i2c_transfer(state->i2c, msg, 2);
-
-	if (rc != 2) {
-		rc("%s: reg=0x%x (error=%d)\n", __func__, reg, rc);
-		return rc;
-	}
-
-	return val;
-}
-
-#define mb86a20s_readreg(state, reg) \
-	mb86a20s_i2c_readreg(state, state->config->demod_address, reg)
-#define mb86a20s_writereg(state, reg, val) \
-	mb86a20s_i2c_writereg(state, state->config->demod_address, reg, val)
-#define mb86a20s_writeregdata(state, regdata) \
-	mb86a20s_i2c_writeregdata(state, state->config->demod_address, \
-	regdata, ARRAY_SIZE(regdata))
-
-static int mb86a20s_initfe(struct dvb_frontend *fe)
-{
-	struct mb86a20s_state *state = fe->demodulator_priv;
-	int rc;
-	u8  regD5 = 1;
-
-	dprintk("\n");
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-
-	/* Initialize the frontend */
-	rc = mb86a20s_writeregdata(state, mb86a20s_init);
-	if (rc < 0)
-		goto err;
-
-	if (!state->config->is_serial) {
-		regD5 &= ~1;
-
-		rc = mb86a20s_writereg(state, 0x50, 0xd5);
-		if (rc < 0)
-			goto err;
-		rc = mb86a20s_writereg(state, 0x51, regD5);
-		if (rc < 0)
-			goto err;
-	}
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-err:
-	if (rc < 0) {
-		state->need_init = true;
-		printk(KERN_INFO "mb86a20s: Init failed. Will try again later\n");
-	} else {
-		state->need_init = false;
-		dprintk("Initialization succeeded.\n");
-	}
-	return rc;
-}
-
-static int mb86a20s_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	struct mb86a20s_state *state = fe->demodulator_priv;
-	unsigned rf_max, rf_min, rf;
-	u8	 val;
-
-	dprintk("\n");
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-
-	/* Does a binary search to get RF strength */
-	rf_max = 0xfff;
-	rf_min = 0;
-	do {
-		rf = (rf_max + rf_min) / 2;
-		mb86a20s_writereg(state, 0x04, 0x1f);
-		mb86a20s_writereg(state, 0x05, rf >> 8);
-		mb86a20s_writereg(state, 0x04, 0x20);
-		mb86a20s_writereg(state, 0x04, rf);
-
-		val = mb86a20s_readreg(state, 0x02);
-		if (val & 0x08)
-			rf_min = (rf_max + rf_min) / 2;
-		else
-			rf_max = (rf_max + rf_min) / 2;
-		if (rf_max - rf_min < 4) {
-			*strength = (((rf_max + rf_min) / 2) * 65535) / 4095;
-			break;
-		}
-	} while (1);
-
-	dprintk("signal strength = %d\n", *strength);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	return 0;
-}
-
-static int mb86a20s_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct mb86a20s_state *state = fe->demodulator_priv;
-	u8 val;
-
-	dprintk("\n");
-	*status = 0;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-	val = mb86a20s_readreg(state, 0x0a) & 0xf;
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	if (val >= 2)
-		*status |= FE_HAS_SIGNAL;
-
-	if (val >= 4)
-		*status |= FE_HAS_CARRIER;
-
-	if (val >= 5)
-		*status |= FE_HAS_VITERBI;
-
-	if (val >= 7)
-		*status |= FE_HAS_SYNC;
-
-	if (val >= 8)				/* Maybe 9? */
-		*status |= FE_HAS_LOCK;
-
-	dprintk("val = %d, status = 0x%02x\n", val, *status);
-
-	return 0;
-}
-
-static int mb86a20s_set_frontend(struct dvb_frontend *fe)
-{
-	struct mb86a20s_state *state = fe->demodulator_priv;
-	int rc;
-#if 0
-	/*
-	 * FIXME: Properly implement the set frontend properties
-	 */
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-#endif
-
-	dprintk("\n");
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	dprintk("Calling tuner set parameters\n");
-	fe->ops.tuner_ops.set_params(fe);
-
-	/*
-	 * Make it more reliable: if, for some reason, the initial
-	 * device initialization doesn't happen, initialize it when
-	 * a SBTVD parameters are adjusted.
-	 *
-	 * Unfortunately, due to a hard to track bug at tda829x/tda18271,
-	 * the agc callback logic is not called during DVB attach time,
-	 * causing mb86a20s to not be initialized with Kworld SBTVD.
-	 * So, this hack is needed, in order to make Kworld SBTVD to work.
-	 */
-	if (state->need_init)
-		mb86a20s_initfe(fe);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-	rc = mb86a20s_writeregdata(state, mb86a20s_reset_reception);
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	return rc;
-}
-
-static int mb86a20s_get_modulation(struct mb86a20s_state *state,
-				   unsigned layer)
-{
-	int rc;
-	static unsigned char reg[] = {
-		[0] = 0x86,	/* Layer A */
-		[1] = 0x8a,	/* Layer B */
-		[2] = 0x8e,	/* Layer C */
-	};
-
-	if (layer >= ARRAY_SIZE(reg))
-		return -EINVAL;
-	rc = mb86a20s_writereg(state, 0x6d, reg[layer]);
-	if (rc < 0)
-		return rc;
-	rc = mb86a20s_readreg(state, 0x6e);
-	if (rc < 0)
-		return rc;
-	switch ((rc & 0x70) >> 4) {
-	case 0:
-		return DQPSK;
-	case 1:
-		return QPSK;
-	case 2:
-		return QAM_16;
-	case 3:
-		return QAM_64;
-	default:
-		return QAM_AUTO;
-	}
-}
-
-static int mb86a20s_get_fec(struct mb86a20s_state *state,
-			    unsigned layer)
-{
-	int rc;
-
-	static unsigned char reg[] = {
-		[0] = 0x87,	/* Layer A */
-		[1] = 0x8b,	/* Layer B */
-		[2] = 0x8f,	/* Layer C */
-	};
-
-	if (layer >= ARRAY_SIZE(reg))
-		return -EINVAL;
-	rc = mb86a20s_writereg(state, 0x6d, reg[layer]);
-	if (rc < 0)
-		return rc;
-	rc = mb86a20s_readreg(state, 0x6e);
-	if (rc < 0)
-		return rc;
-	switch (rc) {
-	case 0:
-		return FEC_1_2;
-	case 1:
-		return FEC_2_3;
-	case 2:
-		return FEC_3_4;
-	case 3:
-		return FEC_5_6;
-	case 4:
-		return FEC_7_8;
-	default:
-		return FEC_AUTO;
-	}
-}
-
-static int mb86a20s_get_interleaving(struct mb86a20s_state *state,
-				     unsigned layer)
-{
-	int rc;
-
-	static unsigned char reg[] = {
-		[0] = 0x88,	/* Layer A */
-		[1] = 0x8c,	/* Layer B */
-		[2] = 0x90,	/* Layer C */
-	};
-
-	if (layer >= ARRAY_SIZE(reg))
-		return -EINVAL;
-	rc = mb86a20s_writereg(state, 0x6d, reg[layer]);
-	if (rc < 0)
-		return rc;
-	rc = mb86a20s_readreg(state, 0x6e);
-	if (rc < 0)
-		return rc;
-	if (rc > 3)
-		return -EINVAL;	/* Not used */
-	return rc;
-}
-
-static int mb86a20s_get_segment_count(struct mb86a20s_state *state,
-				      unsigned layer)
-{
-	int rc, count;
-
-	static unsigned char reg[] = {
-		[0] = 0x89,	/* Layer A */
-		[1] = 0x8d,	/* Layer B */
-		[2] = 0x91,	/* Layer C */
-	};
-
-	if (layer >= ARRAY_SIZE(reg))
-		return -EINVAL;
-	rc = mb86a20s_writereg(state, 0x6d, reg[layer]);
-	if (rc < 0)
-		return rc;
-	rc = mb86a20s_readreg(state, 0x6e);
-	if (rc < 0)
-		return rc;
-	count = (rc >> 4) & 0x0f;
-
-	return count;
-}
-
-static int mb86a20s_get_frontend(struct dvb_frontend *fe)
-{
-	struct mb86a20s_state *state = fe->demodulator_priv;
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	int i, rc;
-
-	/* Fixed parameters */
-	p->delivery_system = SYS_ISDBT;
-	p->bandwidth_hz = 6000000;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-
-	/* Check for partial reception */
-	rc = mb86a20s_writereg(state, 0x6d, 0x85);
-	if (rc >= 0)
-		rc = mb86a20s_readreg(state, 0x6e);
-	if (rc >= 0)
-		p->isdbt_partial_reception = (rc & 0x10) ? 1 : 0;
-
-	/* Get per-layer data */
-	p->isdbt_layer_enabled = 0;
-	for (i = 0; i < 3; i++) {
-		rc = mb86a20s_get_segment_count(state, i);
-			if (rc >= 0 && rc < 14)
-				p->layer[i].segment_count = rc;
-		if (rc == 0x0f)
-			continue;
-		p->isdbt_layer_enabled |= 1 << i;
-		rc = mb86a20s_get_modulation(state, i);
-			if (rc >= 0)
-				p->layer[i].modulation = rc;
-		rc = mb86a20s_get_fec(state, i);
-			if (rc >= 0)
-				p->layer[i].fec = rc;
-		rc = mb86a20s_get_interleaving(state, i);
-			if (rc >= 0)
-				p->layer[i].interleaving = rc;
-	}
-
-	p->isdbt_sb_mode = 0;
-	rc = mb86a20s_writereg(state, 0x6d, 0x84);
-	if ((rc >= 0) && ((rc & 0x60) == 0x20)) {
-		p->isdbt_sb_mode = 1;
-		/* At least, one segment should exist */
-		if (!p->isdbt_sb_segment_count)
-			p->isdbt_sb_segment_count = 1;
-	} else
-		p->isdbt_sb_segment_count = 0;
-
-	/* Get transmission mode and guard interval */
-	p->transmission_mode = TRANSMISSION_MODE_AUTO;
-	p->guard_interval = GUARD_INTERVAL_AUTO;
-	rc = mb86a20s_readreg(state, 0x07);
-	if (rc >= 0) {
-		if ((rc & 0x60) == 0x20) {
-			switch (rc & 0x0c >> 2) {
-			case 0:
-				p->transmission_mode = TRANSMISSION_MODE_2K;
-				break;
-			case 1:
-				p->transmission_mode = TRANSMISSION_MODE_4K;
-				break;
-			case 2:
-				p->transmission_mode = TRANSMISSION_MODE_8K;
-				break;
-			}
-		}
-		if (!(rc & 0x10)) {
-			switch (rc & 0x3) {
-			case 0:
-				p->guard_interval = GUARD_INTERVAL_1_4;
-				break;
-			case 1:
-				p->guard_interval = GUARD_INTERVAL_1_8;
-				break;
-			case 2:
-				p->guard_interval = GUARD_INTERVAL_1_16;
-				break;
-			}
-		}
-	}
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	return 0;
-}
-
-static int mb86a20s_tune(struct dvb_frontend *fe,
-			bool re_tune,
-			unsigned int mode_flags,
-			unsigned int *delay,
-			fe_status_t *status)
-{
-	int rc = 0;
-
-	dprintk("\n");
-
-	if (re_tune)
-		rc = mb86a20s_set_frontend(fe);
-
-	if (!(mode_flags & FE_TUNE_MODE_ONESHOT))
-		mb86a20s_read_status(fe, status);
-
-	return rc;
-}
-
-static void mb86a20s_release(struct dvb_frontend *fe)
-{
-	struct mb86a20s_state *state = fe->demodulator_priv;
-
-	dprintk("\n");
-
-	kfree(state);
-}
-
-static struct dvb_frontend_ops mb86a20s_ops;
-
-struct dvb_frontend *mb86a20s_attach(const struct mb86a20s_config *config,
-				    struct i2c_adapter *i2c)
-{
-	u8	rev;
-
-	/* allocate memory for the internal state */
-	struct mb86a20s_state *state =
-		kzalloc(sizeof(struct mb86a20s_state), GFP_KERNEL);
-
-	dprintk("\n");
-	if (state == NULL) {
-		rc("Unable to kzalloc\n");
-		goto error;
-	}
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &mb86a20s_ops,
-		sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-
-	/* Check if it is a mb86a20s frontend */
-	rev = mb86a20s_readreg(state, 0);
-
-	if (rev == 0x13) {
-		printk(KERN_INFO "Detected a Fujitsu mb86a20s frontend\n");
-	} else {
-		printk(KERN_ERR "Frontend revision %d is unknown - aborting.\n",
-		       rev);
-		goto error;
-	}
-
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(mb86a20s_attach);
-
-static struct dvb_frontend_ops mb86a20s_ops = {
-	.delsys = { SYS_ISDBT },
-	/* Use dib8000 values per default */
-	.info = {
-		.name = "Fujitsu mb86A20s",
-		.caps = FE_CAN_INVERSION_AUTO | FE_CAN_RECOVER |
-			FE_CAN_FEC_1_2  | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6  | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK     | FE_CAN_QAM_16  | FE_CAN_QAM_64 |
-			FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_QAM_AUTO |
-			FE_CAN_GUARD_INTERVAL_AUTO    | FE_CAN_HIERARCHY_AUTO,
-		/* Actually, those values depend on the used tuner */
-		.frequency_min = 45000000,
-		.frequency_max = 864000000,
-		.frequency_stepsize = 62500,
-	},
-
-	.release = mb86a20s_release,
-
-	.init = mb86a20s_initfe,
-	.set_frontend = mb86a20s_set_frontend,
-	.get_frontend = mb86a20s_get_frontend,
-	.read_status = mb86a20s_read_status,
-	.read_signal_strength = mb86a20s_read_signal_strength,
-	.tune = mb86a20s_tune,
-};
-
-MODULE_DESCRIPTION("DVB Frontend module for Fujitsu mb86A20s hardware");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/mb86a20s.h b/drivers/media/dvb/frontends/mb86a20s.h
deleted file mode 100644
index bf22e77..0000000
--- a/drivers/media/dvb/frontends/mb86a20s.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *   Fujitsu mb86a20s driver
- *
- *   Copyright (C) 2010 Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License as
- *   published by the Free Software Foundation version 2.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *   General Public License for more details.
- */
-
-#ifndef MB86A20S_H
-#define MB86A20S_H
-
-#include <linux/dvb/frontend.h>
-
-/**
- * struct mb86a20s_config - Define the per-device attributes of the frontend
- *
- * @demod_address:	the demodulator's i2c address
- */
-
-struct mb86a20s_config {
-	u8 demod_address;
-	bool is_serial;
-};
-
-#if defined(CONFIG_DVB_MB86A20S) || (defined(CONFIG_DVB_MB86A20S_MODULE) \
-	&& defined(MODULE))
-extern struct dvb_frontend *mb86a20s_attach(const struct mb86a20s_config *config,
-					   struct i2c_adapter *i2c);
-extern struct i2c_adapter *mb86a20s_get_tuner_i2c_adapter(struct dvb_frontend *);
-#else
-static inline struct dvb_frontend *mb86a20s_attach(
-	const struct mb86a20s_config *config, struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-static struct i2c_adapter *
-	mb86a20s_get_tuner_i2c_adapter(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif /* MB86A20S */
diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c
deleted file mode 100644
index e20bf13..0000000
--- a/drivers/media/dvb/frontends/mt312.c
+++ /dev/null
@@ -1,839 +0,0 @@
-/*
-    Driver for Zarlink VP310/MT312/ZL10313 Satellite Channel Decoder
-
-    Copyright (C) 2003 Andreas Oberritter <obi@linuxtv.org>
-    Copyright (C) 2008 Matthias Schwarzott <zzam@gentoo.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-    References:
-    http://products.zarlink.com/product_profiles/MT312.htm
-    http://products.zarlink.com/product_profiles/SL1935.htm
-*/
-
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "mt312_priv.h"
-#include "mt312.h"
-
-
-struct mt312_state {
-	struct i2c_adapter *i2c;
-	/* configuration settings */
-	const struct mt312_config *config;
-	struct dvb_frontend frontend;
-
-	u8 id;
-	unsigned long xtal;
-	u8 freq_mult;
-};
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) \
-			printk(KERN_DEBUG "mt312: " args); \
-	} while (0)
-
-#define MT312_PLL_CLK		10000000UL	/* 10 MHz */
-#define MT312_PLL_CLK_10_111	10111000UL	/* 10.111 MHz */
-
-static int mt312_read(struct mt312_state *state, const enum mt312_reg_addr reg,
-		      u8 *buf, const size_t count)
-{
-	int ret;
-	struct i2c_msg msg[2];
-	u8 regbuf[1] = { reg };
-
-	msg[0].addr = state->config->demod_address;
-	msg[0].flags = 0;
-	msg[0].buf = regbuf;
-	msg[0].len = 1;
-	msg[1].addr = state->config->demod_address;
-	msg[1].flags = I2C_M_RD;
-	msg[1].buf = buf;
-	msg[1].len = count;
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2) {
-		printk(KERN_DEBUG "%s: ret == %d\n", __func__, ret);
-		return -EREMOTEIO;
-	}
-
-	if (debug) {
-		int i;
-		dprintk("R(%d):", reg & 0x7f);
-		for (i = 0; i < count; i++)
-			printk(KERN_CONT " %02x", buf[i]);
-		printk("\n");
-	}
-
-	return 0;
-}
-
-static int mt312_write(struct mt312_state *state, const enum mt312_reg_addr reg,
-		       const u8 *src, const size_t count)
-{
-	int ret;
-	u8 buf[count + 1];
-	struct i2c_msg msg;
-
-	if (debug) {
-		int i;
-		dprintk("W(%d):", reg & 0x7f);
-		for (i = 0; i < count; i++)
-			printk(KERN_CONT " %02x", src[i]);
-		printk("\n");
-	}
-
-	buf[0] = reg;
-	memcpy(&buf[1], src, count);
-
-	msg.addr = state->config->demod_address;
-	msg.flags = 0;
-	msg.buf = buf;
-	msg.len = count + 1;
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-
-	if (ret != 1) {
-		dprintk("%s: ret == %d\n", __func__, ret);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static inline int mt312_readreg(struct mt312_state *state,
-				const enum mt312_reg_addr reg, u8 *val)
-{
-	return mt312_read(state, reg, val, 1);
-}
-
-static inline int mt312_writereg(struct mt312_state *state,
-				 const enum mt312_reg_addr reg, const u8 val)
-{
-	return mt312_write(state, reg, &val, 1);
-}
-
-static inline u32 mt312_div(u32 a, u32 b)
-{
-	return (a + (b / 2)) / b;
-}
-
-static int mt312_reset(struct mt312_state *state, const u8 full)
-{
-	return mt312_writereg(state, RESET, full ? 0x80 : 0x40);
-}
-
-static int mt312_get_inversion(struct mt312_state *state,
-			       fe_spectral_inversion_t *i)
-{
-	int ret;
-	u8 vit_mode;
-
-	ret = mt312_readreg(state, VIT_MODE, &vit_mode);
-	if (ret < 0)
-		return ret;
-
-	if (vit_mode & 0x80)	/* auto inversion was used */
-		*i = (vit_mode & 0x40) ? INVERSION_ON : INVERSION_OFF;
-
-	return 0;
-}
-
-static int mt312_get_symbol_rate(struct mt312_state *state, u32 *sr)
-{
-	int ret;
-	u8 sym_rate_h;
-	u8 dec_ratio;
-	u16 sym_rat_op;
-	u16 monitor;
-	u8 buf[2];
-
-	ret = mt312_readreg(state, SYM_RATE_H, &sym_rate_h);
-	if (ret < 0)
-		return ret;
-
-	if (sym_rate_h & 0x80) {
-		/* symbol rate search was used */
-		ret = mt312_writereg(state, MON_CTRL, 0x03);
-		if (ret < 0)
-			return ret;
-
-		ret = mt312_read(state, MONITOR_H, buf, sizeof(buf));
-		if (ret < 0)
-			return ret;
-
-		monitor = (buf[0] << 8) | buf[1];
-
-		dprintk("sr(auto) = %u\n",
-		       mt312_div(monitor * 15625, 4));
-	} else {
-		ret = mt312_writereg(state, MON_CTRL, 0x05);
-		if (ret < 0)
-			return ret;
-
-		ret = mt312_read(state, MONITOR_H, buf, sizeof(buf));
-		if (ret < 0)
-			return ret;
-
-		dec_ratio = ((buf[0] >> 5) & 0x07) * 32;
-
-		ret = mt312_read(state, SYM_RAT_OP_H, buf, sizeof(buf));
-		if (ret < 0)
-			return ret;
-
-		sym_rat_op = (buf[0] << 8) | buf[1];
-
-		dprintk("sym_rat_op=%d dec_ratio=%d\n",
-		       sym_rat_op, dec_ratio);
-		dprintk("*sr(manual) = %lu\n",
-		       (((state->xtal * 8192) / (sym_rat_op + 8192)) *
-			2) - dec_ratio);
-	}
-
-	return 0;
-}
-
-static int mt312_get_code_rate(struct mt312_state *state, fe_code_rate_t *cr)
-{
-	const fe_code_rate_t fec_tab[8] =
-	    { FEC_1_2, FEC_2_3, FEC_3_4, FEC_5_6, FEC_6_7, FEC_7_8,
-		FEC_AUTO, FEC_AUTO };
-
-	int ret;
-	u8 fec_status;
-
-	ret = mt312_readreg(state, FEC_STATUS, &fec_status);
-	if (ret < 0)
-		return ret;
-
-	*cr = fec_tab[(fec_status >> 4) & 0x07];
-
-	return 0;
-}
-
-static int mt312_initfe(struct dvb_frontend *fe)
-{
-	struct mt312_state *state = fe->demodulator_priv;
-	int ret;
-	u8 buf[2];
-
-	/* wake up */
-	ret = mt312_writereg(state, CONFIG,
-			(state->freq_mult == 6 ? 0x88 : 0x8c));
-	if (ret < 0)
-		return ret;
-
-	/* wait at least 150 usec */
-	udelay(150);
-
-	/* full reset */
-	ret = mt312_reset(state, 1);
-	if (ret < 0)
-		return ret;
-
-/* Per datasheet, write correct values. 09/28/03 ACCJr.
- * If we don't do this, we won't get FE_HAS_VITERBI in the VP310. */
-	{
-		u8 buf_def[8] = { 0x14, 0x12, 0x03, 0x02,
-				  0x01, 0x00, 0x00, 0x00 };
-
-		ret = mt312_write(state, VIT_SETUP, buf_def, sizeof(buf_def));
-		if (ret < 0)
-			return ret;
-	}
-
-	switch (state->id) {
-	case ID_ZL10313:
-		/* enable ADC */
-		ret = mt312_writereg(state, GPP_CTRL, 0x80);
-		if (ret < 0)
-			return ret;
-
-		/* configure ZL10313 for optimal ADC performance */
-		buf[0] = 0x80;
-		buf[1] = 0xB0;
-		ret = mt312_write(state, HW_CTRL, buf, 2);
-		if (ret < 0)
-			return ret;
-
-		/* enable MPEG output and ADCs */
-		ret = mt312_writereg(state, HW_CTRL, 0x00);
-		if (ret < 0)
-			return ret;
-
-		ret = mt312_writereg(state, MPEG_CTRL, 0x00);
-		if (ret < 0)
-			return ret;
-
-		break;
-	}
-
-	/* SYS_CLK */
-	buf[0] = mt312_div(state->xtal * state->freq_mult * 2, 1000000);
-
-	/* DISEQC_RATIO */
-	buf[1] = mt312_div(state->xtal, 22000 * 4);
-
-	ret = mt312_write(state, SYS_CLK, buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-
-	ret = mt312_writereg(state, SNR_THS_HIGH, 0x32);
-	if (ret < 0)
-		return ret;
-
-	/* different MOCLK polarity */
-	switch (state->id) {
-	case ID_ZL10313:
-		buf[0] = 0x33;
-		break;
-	default:
-		buf[0] = 0x53;
-		break;
-	}
-
-	ret = mt312_writereg(state, OP_CTRL, buf[0]);
-	if (ret < 0)
-		return ret;
-
-	/* TS_SW_LIM */
-	buf[0] = 0x8c;
-	buf[1] = 0x98;
-
-	ret = mt312_write(state, TS_SW_LIM_L, buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-
-	ret = mt312_writereg(state, CS_SW_LIM, 0x69);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static int mt312_send_master_cmd(struct dvb_frontend *fe,
-				 struct dvb_diseqc_master_cmd *c)
-{
-	struct mt312_state *state = fe->demodulator_priv;
-	int ret;
-	u8 diseqc_mode;
-
-	if ((c->msg_len == 0) || (c->msg_len > sizeof(c->msg)))
-		return -EINVAL;
-
-	ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode);
-	if (ret < 0)
-		return ret;
-
-	ret = mt312_write(state, (0x80 | DISEQC_INSTR), c->msg, c->msg_len);
-	if (ret < 0)
-		return ret;
-
-	ret = mt312_writereg(state, DISEQC_MODE,
-			     (diseqc_mode & 0x40) | ((c->msg_len - 1) << 3)
-			     | 0x04);
-	if (ret < 0)
-		return ret;
-
-	/* is there a better way to wait for message to be transmitted */
-	msleep(100);
-
-	/* set DISEQC_MODE[2:0] to zero if a return message is expected */
-	if (c->msg[0] & 0x02) {
-		ret = mt312_writereg(state, DISEQC_MODE, (diseqc_mode & 0x40));
-		if (ret < 0)
-			return ret;
-	}
-
-	return 0;
-}
-
-static int mt312_send_burst(struct dvb_frontend *fe, const fe_sec_mini_cmd_t c)
-{
-	struct mt312_state *state = fe->demodulator_priv;
-	const u8 mini_tab[2] = { 0x02, 0x03 };
-
-	int ret;
-	u8 diseqc_mode;
-
-	if (c > SEC_MINI_B)
-		return -EINVAL;
-
-	ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode);
-	if (ret < 0)
-		return ret;
-
-	ret = mt312_writereg(state, DISEQC_MODE,
-			     (diseqc_mode & 0x40) | mini_tab[c]);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static int mt312_set_tone(struct dvb_frontend *fe, const fe_sec_tone_mode_t t)
-{
-	struct mt312_state *state = fe->demodulator_priv;
-	const u8 tone_tab[2] = { 0x01, 0x00 };
-
-	int ret;
-	u8 diseqc_mode;
-
-	if (t > SEC_TONE_OFF)
-		return -EINVAL;
-
-	ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode);
-	if (ret < 0)
-		return ret;
-
-	ret = mt312_writereg(state, DISEQC_MODE,
-			     (diseqc_mode & 0x40) | tone_tab[t]);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static int mt312_set_voltage(struct dvb_frontend *fe, const fe_sec_voltage_t v)
-{
-	struct mt312_state *state = fe->demodulator_priv;
-	const u8 volt_tab[3] = { 0x00, 0x40, 0x00 };
-	u8 val;
-
-	if (v > SEC_VOLTAGE_OFF)
-		return -EINVAL;
-
-	val = volt_tab[v];
-	if (state->config->voltage_inverted)
-		val ^= 0x40;
-
-	return mt312_writereg(state, DISEQC_MODE, val);
-}
-
-static int mt312_read_status(struct dvb_frontend *fe, fe_status_t *s)
-{
-	struct mt312_state *state = fe->demodulator_priv;
-	int ret;
-	u8 status[3];
-
-	*s = 0;
-
-	ret = mt312_read(state, QPSK_STAT_H, status, sizeof(status));
-	if (ret < 0)
-		return ret;
-
-	dprintk("QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x,"
-		" FEC_STATUS: 0x%02x\n", status[0], status[1], status[2]);
-
-	if (status[0] & 0xc0)
-		*s |= FE_HAS_SIGNAL;	/* signal noise ratio */
-	if (status[0] & 0x04)
-		*s |= FE_HAS_CARRIER;	/* qpsk carrier lock */
-	if (status[2] & 0x02)
-		*s |= FE_HAS_VITERBI;	/* viterbi lock */
-	if (status[2] & 0x04)
-		*s |= FE_HAS_SYNC;	/* byte align lock */
-	if (status[0] & 0x01)
-		*s |= FE_HAS_LOCK;	/* qpsk lock */
-
-	return 0;
-}
-
-static int mt312_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct mt312_state *state = fe->demodulator_priv;
-	int ret;
-	u8 buf[3];
-
-	ret = mt312_read(state, RS_BERCNT_H, buf, 3);
-	if (ret < 0)
-		return ret;
-
-	*ber = ((buf[0] << 16) | (buf[1] << 8) | buf[2]) * 64;
-
-	return 0;
-}
-
-static int mt312_read_signal_strength(struct dvb_frontend *fe,
-				      u16 *signal_strength)
-{
-	struct mt312_state *state = fe->demodulator_priv;
-	int ret;
-	u8 buf[3];
-	u16 agc;
-	s16 err_db;
-
-	ret = mt312_read(state, AGC_H, buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-
-	agc = (buf[0] << 6) | (buf[1] >> 2);
-	err_db = (s16) (((buf[1] & 0x03) << 14) | buf[2] << 6) >> 6;
-
-	*signal_strength = agc;
-
-	dprintk("agc=%08x err_db=%hd\n", agc, err_db);
-
-	return 0;
-}
-
-static int mt312_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct mt312_state *state = fe->demodulator_priv;
-	int ret;
-	u8 buf[2];
-
-	ret = mt312_read(state, M_SNR_H, buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-
-	*snr = 0xFFFF - ((((buf[0] & 0x7f) << 8) | buf[1]) << 1);
-
-	return 0;
-}
-
-static int mt312_read_ucblocks(struct dvb_frontend *fe, u32 *ubc)
-{
-	struct mt312_state *state = fe->demodulator_priv;
-	int ret;
-	u8 buf[2];
-
-	ret = mt312_read(state, RS_UBC_H, buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-
-	*ubc = (buf[0] << 8) | buf[1];
-
-	return 0;
-}
-
-static int mt312_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct mt312_state *state = fe->demodulator_priv;
-	int ret;
-	u8 buf[5], config_val;
-	u16 sr;
-
-	const u8 fec_tab[10] =
-	    { 0x00, 0x01, 0x02, 0x04, 0x3f, 0x08, 0x10, 0x20, 0x3f, 0x3f };
-	const u8 inv_tab[3] = { 0x00, 0x40, 0x80 };
-
-	dprintk("%s: Freq %d\n", __func__, p->frequency);
-
-	if ((p->frequency < fe->ops.info.frequency_min)
-	    || (p->frequency > fe->ops.info.frequency_max))
-		return -EINVAL;
-
-	if ((p->inversion < INVERSION_OFF)
-	    || (p->inversion > INVERSION_ON))
-		return -EINVAL;
-
-	if ((p->symbol_rate < fe->ops.info.symbol_rate_min)
-	    || (p->symbol_rate > fe->ops.info.symbol_rate_max))
-		return -EINVAL;
-
-	if ((p->fec_inner < FEC_NONE)
-	    || (p->fec_inner > FEC_AUTO))
-		return -EINVAL;
-
-	if ((p->fec_inner == FEC_4_5)
-	    || (p->fec_inner == FEC_8_9))
-		return -EINVAL;
-
-	switch (state->id) {
-	case ID_VP310:
-	/* For now we will do this only for the VP310.
-	 * It should be better for the mt312 as well,
-	 * but tuning will be slower. ACCJr 09/29/03
-	 */
-		ret = mt312_readreg(state, CONFIG, &config_val);
-		if (ret < 0)
-			return ret;
-		if (p->symbol_rate >= 30000000) {
-			/* Note that 30MS/s should use 90MHz */
-			if (state->freq_mult == 6) {
-				/* We are running 60MHz */
-				state->freq_mult = 9;
-				ret = mt312_initfe(fe);
-				if (ret < 0)
-					return ret;
-			}
-		} else {
-			if (state->freq_mult == 9) {
-				/* We are running 90MHz */
-				state->freq_mult = 6;
-				ret = mt312_initfe(fe);
-				if (ret < 0)
-					return ret;
-			}
-		}
-		break;
-
-	case ID_MT312:
-	case ID_ZL10313:
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	/* sr = (u16)(sr * 256.0 / 1000000.0) */
-	sr = mt312_div(p->symbol_rate * 4, 15625);
-
-	/* SYM_RATE */
-	buf[0] = (sr >> 8) & 0x3f;
-	buf[1] = (sr >> 0) & 0xff;
-
-	/* VIT_MODE */
-	buf[2] = inv_tab[p->inversion] | fec_tab[p->fec_inner];
-
-	/* QPSK_CTRL */
-	buf[3] = 0x40;		/* swap I and Q before QPSK demodulation */
-
-	if (p->symbol_rate < 10000000)
-		buf[3] |= 0x04;	/* use afc mode */
-
-	/* GO */
-	buf[4] = 0x01;
-
-	ret = mt312_write(state, SYM_RATE_H, buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-
-	mt312_reset(state, 0);
-
-	return 0;
-}
-
-static int mt312_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct mt312_state *state = fe->demodulator_priv;
-	int ret;
-
-	ret = mt312_get_inversion(state, &p->inversion);
-	if (ret < 0)
-		return ret;
-
-	ret = mt312_get_symbol_rate(state, &p->symbol_rate);
-	if (ret < 0)
-		return ret;
-
-	ret = mt312_get_code_rate(state, &p->fec_inner);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static int mt312_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct mt312_state *state = fe->demodulator_priv;
-
-	u8 val = 0x00;
-	int ret;
-
-	switch (state->id) {
-	case ID_ZL10313:
-		ret = mt312_readreg(state, GPP_CTRL, &val);
-		if (ret < 0)
-			goto error;
-
-		/* preserve this bit to not accidentally shutdown ADC */
-		val &= 0x80;
-		break;
-	}
-
-	if (enable)
-		val |= 0x40;
-	else
-		val &= ~0x40;
-
-	ret = mt312_writereg(state, GPP_CTRL, val);
-
-error:
-	return ret;
-}
-
-static int mt312_sleep(struct dvb_frontend *fe)
-{
-	struct mt312_state *state = fe->demodulator_priv;
-	int ret;
-	u8 config;
-
-	/* reset all registers to defaults */
-	ret = mt312_reset(state, 1);
-	if (ret < 0)
-		return ret;
-
-	if (state->id == ID_ZL10313) {
-		/* reset ADC */
-		ret = mt312_writereg(state, GPP_CTRL, 0x00);
-		if (ret < 0)
-			return ret;
-
-		/* full shutdown of ADCs, mpeg bus tristated */
-		ret = mt312_writereg(state, HW_CTRL, 0x0d);
-		if (ret < 0)
-			return ret;
-	}
-
-	ret = mt312_readreg(state, CONFIG, &config);
-	if (ret < 0)
-		return ret;
-
-	/* enter standby */
-	ret = mt312_writereg(state, CONFIG, config & 0x7f);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static int mt312_get_tune_settings(struct dvb_frontend *fe,
-		struct dvb_frontend_tune_settings *fesettings)
-{
-	fesettings->min_delay_ms = 50;
-	fesettings->step_size = 0;
-	fesettings->max_drift = 0;
-	return 0;
-}
-
-static void mt312_release(struct dvb_frontend *fe)
-{
-	struct mt312_state *state = fe->demodulator_priv;
-	kfree(state);
-}
-
-#define MT312_SYS_CLK		90000000UL	/* 90 MHz */
-static struct dvb_frontend_ops mt312_ops = {
-	.delsys = { SYS_DVBS },
-	.info = {
-		.name = "Zarlink ???? DVB-S",
-		.frequency_min = 950000,
-		.frequency_max = 2150000,
-		/* FIXME: adjust freq to real used xtal */
-		.frequency_stepsize = (MT312_PLL_CLK / 1000) / 128,
-		.symbol_rate_min = MT312_SYS_CLK / 128, /* FIXME as above */
-		.symbol_rate_max = MT312_SYS_CLK / 2,
-		.caps =
-		    FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
-		    FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
-		    FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_MUTE_TS |
-		    FE_CAN_RECOVER
-	},
-
-	.release = mt312_release,
-
-	.init = mt312_initfe,
-	.sleep = mt312_sleep,
-	.i2c_gate_ctrl = mt312_i2c_gate_ctrl,
-
-	.set_frontend = mt312_set_frontend,
-	.get_frontend = mt312_get_frontend,
-	.get_tune_settings = mt312_get_tune_settings,
-
-	.read_status = mt312_read_status,
-	.read_ber = mt312_read_ber,
-	.read_signal_strength = mt312_read_signal_strength,
-	.read_snr = mt312_read_snr,
-	.read_ucblocks = mt312_read_ucblocks,
-
-	.diseqc_send_master_cmd = mt312_send_master_cmd,
-	.diseqc_send_burst = mt312_send_burst,
-	.set_tone = mt312_set_tone,
-	.set_voltage = mt312_set_voltage,
-};
-
-struct dvb_frontend *mt312_attach(const struct mt312_config *config,
-					struct i2c_adapter *i2c)
-{
-	struct mt312_state *state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct mt312_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-
-	/* check if the demod is there */
-	if (mt312_readreg(state, ID, &state->id) < 0)
-		goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &mt312_ops,
-		sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-
-	switch (state->id) {
-	case ID_VP310:
-		strcpy(state->frontend.ops.info.name, "Zarlink VP310 DVB-S");
-		state->xtal = MT312_PLL_CLK;
-		state->freq_mult = 9;
-		break;
-	case ID_MT312:
-		strcpy(state->frontend.ops.info.name, "Zarlink MT312 DVB-S");
-		state->xtal = MT312_PLL_CLK;
-		state->freq_mult = 6;
-		break;
-	case ID_ZL10313:
-		strcpy(state->frontend.ops.info.name, "Zarlink ZL10313 DVB-S");
-		state->xtal = MT312_PLL_CLK_10_111;
-		state->freq_mult = 9;
-		break;
-	default:
-		printk(KERN_WARNING "Only Zarlink VP310/MT312/ZL10313"
-			" are supported chips.\n");
-		goto error;
-	}
-
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(mt312_attach);
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("Zarlink VP310/MT312/ZL10313 DVB-S Demodulator driver");
-MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
-MODULE_AUTHOR("Matthias Schwarzott <zzam@gentoo.org>");
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/media/dvb/frontends/mt312.h b/drivers/media/dvb/frontends/mt312.h
deleted file mode 100644
index 29e3bb5..0000000
--- a/drivers/media/dvb/frontends/mt312.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
-    Driver for Zarlink MT312 Satellite Channel Decoder
-
-    Copyright (C) 2003 Andreas Oberritter <obi@linuxtv.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-    References:
-    http://products.zarlink.com/product_profiles/MT312.htm
-    http://products.zarlink.com/product_profiles/SL1935.htm
-*/
-
-#ifndef MT312_H
-#define MT312_H
-
-#include <linux/dvb/frontend.h>
-
-struct mt312_config {
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* inverted voltage setting */
-	unsigned int voltage_inverted:1;
-};
-
-#if defined(CONFIG_DVB_MT312) || (defined(CONFIG_DVB_MT312_MODULE) && defined(MODULE))
-struct dvb_frontend *mt312_attach(const struct mt312_config *config,
-					struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *mt312_attach(
-	const struct mt312_config *config, struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_MT312 */
-
-#endif /* MT312_H */
diff --git a/drivers/media/dvb/frontends/mt312_priv.h b/drivers/media/dvb/frontends/mt312_priv.h
deleted file mode 100644
index a3959f9..0000000
--- a/drivers/media/dvb/frontends/mt312_priv.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
-    Driver for Zarlink MT312 QPSK Frontend
-
-    Copyright (C) 2003 Andreas Oberritter <obi@linuxtv.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef _DVB_FRONTENDS_MT312_PRIV
-#define _DVB_FRONTENDS_MT312_PRIV
-
-enum mt312_reg_addr {
-	QPSK_INT_H = 0,
-	QPSK_INT_M = 1,
-	QPSK_INT_L = 2,
-	FEC_INT = 3,
-	QPSK_STAT_H = 4,
-	QPSK_STAT_L = 5,
-	FEC_STATUS = 6,
-	LNB_FREQ_H = 7,
-	LNB_FREQ_L = 8,
-	M_SNR_H = 9,
-	M_SNR_L = 10,
-	VIT_ERRCNT_H = 11,
-	VIT_ERRCNT_M = 12,
-	VIT_ERRCNT_L = 13,
-	RS_BERCNT_H = 14,
-	RS_BERCNT_M = 15,
-	RS_BERCNT_L = 16,
-	RS_UBC_H = 17,
-	RS_UBC_L = 18,
-	SIG_LEVEL = 19,
-	GPP_CTRL = 20,
-	RESET = 21,
-	DISEQC_MODE = 22,
-	SYM_RATE_H = 23,
-	SYM_RATE_L = 24,
-	VIT_MODE = 25,
-	QPSK_CTRL = 26,
-	GO = 27,
-	IE_QPSK_H = 28,
-	IE_QPSK_M = 29,
-	IE_QPSK_L = 30,
-	IE_FEC = 31,
-	QPSK_STAT_EN = 32,
-	FEC_STAT_EN = 33,
-	SYS_CLK = 34,
-	DISEQC_RATIO = 35,
-	DISEQC_INSTR = 36,
-	FR_LIM = 37,
-	FR_OFF = 38,
-	AGC_CTRL = 39,
-	AGC_INIT = 40,
-	AGC_REF = 41,
-	AGC_MAX = 42,
-	AGC_MIN = 43,
-	AGC_LK_TH = 44,
-	TS_AGC_LK_TH = 45,
-	AGC_PWR_SET = 46,
-	QPSK_MISC = 47,
-	SNR_THS_LOW = 48,
-	SNR_THS_HIGH = 49,
-	TS_SW_RATE = 50,
-	TS_SW_LIM_L = 51,
-	TS_SW_LIM_H = 52,
-	CS_SW_RATE_1 = 53,
-	CS_SW_RATE_2 = 54,
-	CS_SW_RATE_3 = 55,
-	CS_SW_RATE_4 = 56,
-	CS_SW_LIM = 57,
-	TS_LPK = 58,
-	TS_LPK_M = 59,
-	TS_LPK_L = 60,
-	CS_KPROP_H = 61,
-	CS_KPROP_L = 62,
-	CS_KINT_H = 63,
-	CS_KINT_L = 64,
-	QPSK_SCALE = 65,
-	TLD_OUTCLK_TH = 66,
-	TLD_INCLK_TH = 67,
-	FLD_TH = 68,
-	PLD_OUTLK3 = 69,
-	PLD_OUTLK2 = 70,
-	PLD_OUTLK1 = 71,
-	PLD_OUTLK0 = 72,
-	PLD_INLK3 = 73,
-	PLD_INLK2 = 74,
-	PLD_INLK1 = 75,
-	PLD_INLK0 = 76,
-	PLD_ACC_TIME = 77,
-	SWEEP_PAR = 78,
-	STARTUP_TIME = 79,
-	LOSSLOCK_TH = 80,
-	FEC_LOCK_TM = 81,
-	LOSSLOCK_TM = 82,
-	VIT_ERRPER_H = 83,
-	VIT_ERRPER_M = 84,
-	VIT_ERRPER_L = 85,
-	HW_CTRL = 84,	/* ZL10313 only */
-	MPEG_CTRL = 85,	/* ZL10313 only */
-	VIT_SETUP = 86,
-	VIT_REF0 = 87,
-	VIT_REF1 = 88,
-	VIT_REF2 = 89,
-	VIT_REF3 = 90,
-	VIT_REF4 = 91,
-	VIT_REF5 = 92,
-	VIT_REF6 = 93,
-	VIT_MAXERR = 94,
-	BA_SETUPT = 95,
-	OP_CTRL = 96,
-	FEC_SETUP = 97,
-	PROG_SYNC = 98,
-	AFC_SEAR_TH = 99,
-	CSACC_DIF_TH = 100,
-	QPSK_LK_CT = 101,
-	QPSK_ST_CT = 102,
-	MON_CTRL = 103,
-	QPSK_RESET = 104,
-	QPSK_TST_CT = 105,
-	QPSK_TST_ST = 106,
-	TEST_R = 107,
-	AGC_H = 108,
-	AGC_M = 109,
-	AGC_L = 110,
-	FREQ_ERR1_H = 111,
-	FREQ_ERR1_M = 112,
-	FREQ_ERR1_L = 113,
-	FREQ_ERR2_H = 114,
-	FREQ_ERR2_L = 115,
-	SYM_RAT_OP_H = 116,
-	SYM_RAT_OP_L = 117,
-	DESEQC2_INT = 118,
-	DISEQC2_STAT = 119,
-	DISEQC2_FIFO = 120,
-	DISEQC2_CTRL1 = 121,
-	DISEQC2_CTRL2 = 122,
-	MONITOR_H = 123,
-	MONITOR_L = 124,
-	TEST_MODE = 125,
-	ID = 126,
-	CONFIG = 127
-};
-
-enum mt312_model_id {
-	ID_VP310 = 1,
-	ID_MT312 = 3,
-	ID_ZL10313 = 5,
-};
-
-#endif				/* DVB_FRONTENDS_MT312_PRIV */
diff --git a/drivers/media/dvb/frontends/mt352.c b/drivers/media/dvb/frontends/mt352.c
deleted file mode 100644
index 2c3b50e..0000000
--- a/drivers/media/dvb/frontends/mt352.c
+++ /dev/null
@@ -1,610 +0,0 @@
-/*
- *  Driver for Zarlink DVB-T MT352 demodulator
- *
- *  Written by Holger Waechtler <holger@qanu.de>
- *	 and Daniel Mack <daniel@qanu.de>
- *
- *  AVerMedia AVerTV DVB-T 771 support by
- *       Wolfram Joost <dbox2@frokaschwei.de>
- *
- *  Support for Samsung TDTC9251DH01C(M) tuner
- *  Copyright (C) 2004 Antonio Mancuso <antonio.mancuso@digitaltelevision.it>
- *                     Amauri  Celani  <acelani@essegi.net>
- *
- *  DVICO FusionHDTV DVB-T1 and DVICO FusionHDTV DVB-T Lite support by
- *       Christopher Pascoe <c.pascoe@itee.uq.edu.au>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "mt352_priv.h"
-#include "mt352.h"
-
-struct mt352_state {
-	struct i2c_adapter* i2c;
-	struct dvb_frontend frontend;
-
-	/* configuration settings */
-	struct mt352_config config;
-};
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "mt352: " args); \
-	} while (0)
-
-static int mt352_single_write(struct dvb_frontend *fe, u8 reg, u8 val)
-{
-	struct mt352_state* state = fe->demodulator_priv;
-	u8 buf[2] = { reg, val };
-	struct i2c_msg msg = { .addr = state->config.demod_address, .flags = 0,
-			       .buf = buf, .len = 2 };
-	int err = i2c_transfer(state->i2c, &msg, 1);
-	if (err != 1) {
-		printk("mt352_write() to reg %x failed (err = %d)!\n", reg, err);
-		return err;
-	}
-	return 0;
-}
-
-static int _mt352_write(struct dvb_frontend* fe, const u8 ibuf[], int ilen)
-{
-	int err,i;
-	for (i=0; i < ilen-1; i++)
-		if ((err = mt352_single_write(fe,ibuf[0]+i,ibuf[i+1])))
-			return err;
-
-	return 0;
-}
-
-static int mt352_read_register(struct mt352_state* state, u8 reg)
-{
-	int ret;
-	u8 b0 [] = { reg };
-	u8 b1 [] = { 0 };
-	struct i2c_msg msg [] = { { .addr = state->config.demod_address,
-				    .flags = 0,
-				    .buf = b0, .len = 1 },
-				  { .addr = state->config.demod_address,
-				    .flags = I2C_M_RD,
-				    .buf = b1, .len = 1 } };
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2) {
-		printk("%s: readreg error (reg=%d, ret==%i)\n",
-		       __func__, reg, ret);
-		return ret;
-	}
-
-	return b1[0];
-}
-
-static int mt352_sleep(struct dvb_frontend* fe)
-{
-	static u8 mt352_softdown[] = { CLOCK_CTL, 0x20, 0x08 };
-
-	_mt352_write(fe, mt352_softdown, sizeof(mt352_softdown));
-	return 0;
-}
-
-static void mt352_calc_nominal_rate(struct mt352_state* state,
-				    u32 bandwidth,
-				    unsigned char *buf)
-{
-	u32 adc_clock = 20480; /* 20.340 MHz */
-	u32 bw,value;
-
-	switch (bandwidth) {
-	case 6000000:
-		bw = 6;
-		break;
-	case 7000000:
-		bw = 7;
-		break;
-	case 8000000:
-	default:
-		bw = 8;
-		break;
-	}
-	if (state->config.adc_clock)
-		adc_clock = state->config.adc_clock;
-
-	value = 64 * bw * (1<<16) / (7 * 8);
-	value = value * 1000 / adc_clock;
-	dprintk("%s: bw %d, adc_clock %d => 0x%x\n",
-		__func__, bw, adc_clock, value);
-	buf[0] = msb(value);
-	buf[1] = lsb(value);
-}
-
-static void mt352_calc_input_freq(struct mt352_state* state,
-				  unsigned char *buf)
-{
-	int adc_clock = 20480; /* 20.480000 MHz */
-	int if2       = 36167; /* 36.166667 MHz */
-	int ife,value;
-
-	if (state->config.adc_clock)
-		adc_clock = state->config.adc_clock;
-	if (state->config.if2)
-		if2 = state->config.if2;
-
-	if (adc_clock >= if2 * 2)
-		ife = if2;
-	else {
-		ife = adc_clock - (if2 % adc_clock);
-		if (ife > adc_clock / 2)
-			ife = adc_clock - ife;
-	}
-	value = -16374 * ife / adc_clock;
-	dprintk("%s: if2 %d, ife %d, adc_clock %d => %d / 0x%x\n",
-		__func__, if2, ife, adc_clock, value, value & 0x3fff);
-	buf[0] = msb(value);
-	buf[1] = lsb(value);
-}
-
-static int mt352_set_parameters(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *op = &fe->dtv_property_cache;
-	struct mt352_state* state = fe->demodulator_priv;
-	unsigned char buf[13];
-	static unsigned char tuner_go[] = { 0x5d, 0x01 };
-	static unsigned char fsm_go[]   = { 0x5e, 0x01 };
-	unsigned int tps = 0;
-
-	switch (op->code_rate_HP) {
-		case FEC_2_3:
-			tps |= (1 << 7);
-			break;
-		case FEC_3_4:
-			tps |= (2 << 7);
-			break;
-		case FEC_5_6:
-			tps |= (3 << 7);
-			break;
-		case FEC_7_8:
-			tps |= (4 << 7);
-			break;
-		case FEC_1_2:
-		case FEC_AUTO:
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	switch (op->code_rate_LP) {
-		case FEC_2_3:
-			tps |= (1 << 4);
-			break;
-		case FEC_3_4:
-			tps |= (2 << 4);
-			break;
-		case FEC_5_6:
-			tps |= (3 << 4);
-			break;
-		case FEC_7_8:
-			tps |= (4 << 4);
-			break;
-		case FEC_1_2:
-		case FEC_AUTO:
-			break;
-		case FEC_NONE:
-			if (op->hierarchy == HIERARCHY_AUTO ||
-			    op->hierarchy == HIERARCHY_NONE)
-				break;
-		default:
-			return -EINVAL;
-	}
-
-	switch (op->modulation) {
-		case QPSK:
-			break;
-		case QAM_AUTO:
-		case QAM_16:
-			tps |= (1 << 13);
-			break;
-		case QAM_64:
-			tps |= (2 << 13);
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	switch (op->transmission_mode) {
-		case TRANSMISSION_MODE_2K:
-		case TRANSMISSION_MODE_AUTO:
-			break;
-		case TRANSMISSION_MODE_8K:
-			tps |= (1 << 0);
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	switch (op->guard_interval) {
-		case GUARD_INTERVAL_1_32:
-		case GUARD_INTERVAL_AUTO:
-			break;
-		case GUARD_INTERVAL_1_16:
-			tps |= (1 << 2);
-			break;
-		case GUARD_INTERVAL_1_8:
-			tps |= (2 << 2);
-			break;
-		case GUARD_INTERVAL_1_4:
-			tps |= (3 << 2);
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	switch (op->hierarchy) {
-		case HIERARCHY_AUTO:
-		case HIERARCHY_NONE:
-			break;
-		case HIERARCHY_1:
-			tps |= (1 << 10);
-			break;
-		case HIERARCHY_2:
-			tps |= (2 << 10);
-			break;
-		case HIERARCHY_4:
-			tps |= (3 << 10);
-			break;
-		default:
-			return -EINVAL;
-	}
-
-
-	buf[0] = TPS_GIVEN_1; /* TPS_GIVEN_1 and following registers */
-
-	buf[1] = msb(tps);      /* TPS_GIVEN_(1|0) */
-	buf[2] = lsb(tps);
-
-	buf[3] = 0x50;  // old
-//	buf[3] = 0xf4;  // pinnacle
-
-	mt352_calc_nominal_rate(state, op->bandwidth_hz, buf+4);
-	mt352_calc_input_freq(state, buf+6);
-
-	if (state->config.no_tuner) {
-		if (fe->ops.tuner_ops.set_params) {
-			fe->ops.tuner_ops.set_params(fe);
-			if (fe->ops.i2c_gate_ctrl)
-				fe->ops.i2c_gate_ctrl(fe, 0);
-		}
-
-		_mt352_write(fe, buf, 8);
-		_mt352_write(fe, fsm_go, 2);
-	} else {
-		if (fe->ops.tuner_ops.calc_regs) {
-			fe->ops.tuner_ops.calc_regs(fe, buf+8, 5);
-			buf[8] <<= 1;
-			_mt352_write(fe, buf, sizeof(buf));
-			_mt352_write(fe, tuner_go, 2);
-		}
-	}
-
-	return 0;
-}
-
-static int mt352_get_parameters(struct dvb_frontend* fe)
-{
-	struct dtv_frontend_properties *op = &fe->dtv_property_cache;
-	struct mt352_state* state = fe->demodulator_priv;
-	u16 tps;
-	u16 div;
-	u8 trl;
-	static const u8 tps_fec_to_api[8] =
-	{
-		FEC_1_2,
-		FEC_2_3,
-		FEC_3_4,
-		FEC_5_6,
-		FEC_7_8,
-		FEC_AUTO,
-		FEC_AUTO,
-		FEC_AUTO
-	};
-
-	if ( (mt352_read_register(state,0x00) & 0xC0) != 0xC0 )
-		return -EINVAL;
-
-	/* Use TPS_RECEIVED-registers, not the TPS_CURRENT-registers because
-	 * the mt352 sometimes works with the wrong parameters
-	 */
-	tps = (mt352_read_register(state, TPS_RECEIVED_1) << 8) | mt352_read_register(state, TPS_RECEIVED_0);
-	div = (mt352_read_register(state, CHAN_START_1) << 8) | mt352_read_register(state, CHAN_START_0);
-	trl = mt352_read_register(state, TRL_NOMINAL_RATE_1);
-
-	op->code_rate_HP = tps_fec_to_api[(tps >> 7) & 7];
-	op->code_rate_LP = tps_fec_to_api[(tps >> 4) & 7];
-
-	switch ( (tps >> 13) & 3)
-	{
-		case 0:
-			op->modulation = QPSK;
-			break;
-		case 1:
-			op->modulation = QAM_16;
-			break;
-		case 2:
-			op->modulation = QAM_64;
-			break;
-		default:
-			op->modulation = QAM_AUTO;
-			break;
-	}
-
-	op->transmission_mode = (tps & 0x01) ? TRANSMISSION_MODE_8K : TRANSMISSION_MODE_2K;
-
-	switch ( (tps >> 2) & 3)
-	{
-		case 0:
-			op->guard_interval = GUARD_INTERVAL_1_32;
-			break;
-		case 1:
-			op->guard_interval = GUARD_INTERVAL_1_16;
-			break;
-		case 2:
-			op->guard_interval = GUARD_INTERVAL_1_8;
-			break;
-		case 3:
-			op->guard_interval = GUARD_INTERVAL_1_4;
-			break;
-		default:
-			op->guard_interval = GUARD_INTERVAL_AUTO;
-			break;
-	}
-
-	switch ( (tps >> 10) & 7)
-	{
-		case 0:
-			op->hierarchy = HIERARCHY_NONE;
-			break;
-		case 1:
-			op->hierarchy = HIERARCHY_1;
-			break;
-		case 2:
-			op->hierarchy = HIERARCHY_2;
-			break;
-		case 3:
-			op->hierarchy = HIERARCHY_4;
-			break;
-		default:
-			op->hierarchy = HIERARCHY_AUTO;
-			break;
-	}
-
-	op->frequency = (500 * (div - IF_FREQUENCYx6)) / 3 * 1000;
-
-	if (trl == 0x72)
-		op->bandwidth_hz = 8000000;
-	else if (trl == 0x64)
-		op->bandwidth_hz = 7000000;
-	else
-		op->bandwidth_hz = 6000000;
-
-
-	if (mt352_read_register(state, STATUS_2) & 0x02)
-		op->inversion = INVERSION_OFF;
-	else
-		op->inversion = INVERSION_ON;
-
-	return 0;
-}
-
-static int mt352_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct mt352_state* state = fe->demodulator_priv;
-	int s0, s1, s3;
-
-	/* FIXME:
-	 *
-	 * The MT352 design manual from Zarlink states (page 46-47):
-	 *
-	 * Notes about the TUNER_GO register:
-	 *
-	 * If the Read_Tuner_Byte (bit-1) is activated, then the tuner status
-	 * byte is copied from the tuner to the STATUS_3 register and
-	 * completion of the read operation is indicated by bit-5 of the
-	 * INTERRUPT_3 register.
-	 */
-
-	if ((s0 = mt352_read_register(state, STATUS_0)) < 0)
-		return -EREMOTEIO;
-	if ((s1 = mt352_read_register(state, STATUS_1)) < 0)
-		return -EREMOTEIO;
-	if ((s3 = mt352_read_register(state, STATUS_3)) < 0)
-		return -EREMOTEIO;
-
-	*status = 0;
-	if (s0 & (1 << 4))
-		*status |= FE_HAS_CARRIER;
-	if (s0 & (1 << 1))
-		*status |= FE_HAS_VITERBI;
-	if (s0 & (1 << 5))
-		*status |= FE_HAS_LOCK;
-	if (s1 & (1 << 1))
-		*status |= FE_HAS_SYNC;
-	if (s3 & (1 << 6))
-		*status |= FE_HAS_SIGNAL;
-
-	if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) !=
-		      (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC))
-		*status &= ~FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int mt352_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct mt352_state* state = fe->demodulator_priv;
-
-	*ber = (mt352_read_register (state, RS_ERR_CNT_2) << 16) |
-	       (mt352_read_register (state, RS_ERR_CNT_1) << 8) |
-	       (mt352_read_register (state, RS_ERR_CNT_0));
-
-	return 0;
-}
-
-static int mt352_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	struct mt352_state* state = fe->demodulator_priv;
-
-	/* align the 12 bit AGC gain with the most significant bits */
-	u16 signal = ((mt352_read_register(state, AGC_GAIN_1) & 0x0f) << 12) |
-		(mt352_read_register(state, AGC_GAIN_0) << 4);
-
-	/* inverse of gain is signal strength */
-	*strength = ~signal;
-	return 0;
-}
-
-static int mt352_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct mt352_state* state = fe->demodulator_priv;
-
-	u8 _snr = mt352_read_register (state, SNR);
-	*snr = (_snr << 8) | _snr;
-
-	return 0;
-}
-
-static int mt352_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct mt352_state* state = fe->demodulator_priv;
-
-	*ucblocks = (mt352_read_register (state,  RS_UBC_1) << 8) |
-		    (mt352_read_register (state,  RS_UBC_0));
-
-	return 0;
-}
-
-static int mt352_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings)
-{
-	fe_tune_settings->min_delay_ms = 800;
-	fe_tune_settings->step_size = 0;
-	fe_tune_settings->max_drift = 0;
-
-	return 0;
-}
-
-static int mt352_init(struct dvb_frontend* fe)
-{
-	struct mt352_state* state = fe->demodulator_priv;
-
-	static u8 mt352_reset_attach [] = { RESET, 0xC0 };
-
-	dprintk("%s: hello\n",__func__);
-
-	if ((mt352_read_register(state, CLOCK_CTL) & 0x10) == 0 ||
-	    (mt352_read_register(state, CONFIG) & 0x20) == 0) {
-
-		/* Do a "hard" reset */
-		_mt352_write(fe, mt352_reset_attach, sizeof(mt352_reset_attach));
-		return state->config.demod_init(fe);
-	}
-
-	return 0;
-}
-
-static void mt352_release(struct dvb_frontend* fe)
-{
-	struct mt352_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops mt352_ops;
-
-struct dvb_frontend* mt352_attach(const struct mt352_config* config,
-				  struct i2c_adapter* i2c)
-{
-	struct mt352_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct mt352_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->i2c = i2c;
-	memcpy(&state->config,config,sizeof(struct mt352_config));
-
-	/* check if the demod is there */
-	if (mt352_read_register(state, CHIP_ID) != ID_MT352) goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &mt352_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops mt352_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name			= "Zarlink MT352 DVB-T",
-		.frequency_min		= 174000000,
-		.frequency_max		= 862000000,
-		.frequency_stepsize	= 166667,
-		.frequency_tolerance	= 0,
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
-			FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
-			FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
-			FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER |
-			FE_CAN_MUTE_TS
-	},
-
-	.release = mt352_release,
-
-	.init = mt352_init,
-	.sleep = mt352_sleep,
-	.write = _mt352_write,
-
-	.set_frontend = mt352_set_parameters,
-	.get_frontend = mt352_get_parameters,
-	.get_tune_settings = mt352_get_tune_settings,
-
-	.read_status = mt352_read_status,
-	.read_ber = mt352_read_ber,
-	.read_signal_strength = mt352_read_signal_strength,
-	.read_snr = mt352_read_snr,
-	.read_ucblocks = mt352_read_ucblocks,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("Zarlink MT352 DVB-T Demodulator driver");
-MODULE_AUTHOR("Holger Waechtler, Daniel Mack, Antonio Mancuso");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(mt352_attach);
diff --git a/drivers/media/dvb/frontends/mt352.h b/drivers/media/dvb/frontends/mt352.h
deleted file mode 100644
index ca2562d..0000000
--- a/drivers/media/dvb/frontends/mt352.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- *  Driver for Zarlink DVB-T MT352 demodulator
- *
- *  Written by Holger Waechtler <holger@qanu.de>
- *	 and Daniel Mack <daniel@qanu.de>
- *
- *  AVerMedia AVerTV DVB-T 771 support by
- *       Wolfram Joost <dbox2@frokaschwei.de>
- *
- *  Support for Samsung TDTC9251DH01C(M) tuner
- *  Copyright (C) 2004 Antonio Mancuso <antonio.mancuso@digitaltelevision.it>
- *                     Amauri  Celani  <acelani@essegi.net>
- *
- *  DVICO FusionHDTV DVB-T1 and DVICO FusionHDTV DVB-T Lite support by
- *       Christopher Pascoe <c.pascoe@itee.uq.edu.au>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
- */
-
-#ifndef MT352_H
-#define MT352_H
-
-#include <linux/dvb/frontend.h>
-
-struct mt352_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* frequencies in kHz */
-	int adc_clock;  // default: 20480
-	int if2;        // default: 36166
-
-	/* set if no pll is connected to the secondary i2c bus */
-	int no_tuner;
-
-	/* Initialise the demodulator and PLL. Cannot be NULL */
-	int (*demod_init)(struct dvb_frontend* fe);
-};
-
-#if defined(CONFIG_DVB_MT352) || (defined(CONFIG_DVB_MT352_MODULE) && defined(MODULE))
-extern struct dvb_frontend* mt352_attach(const struct mt352_config* config,
-					 struct i2c_adapter* i2c);
-#else
-static inline struct dvb_frontend* mt352_attach(const struct mt352_config* config,
-					 struct i2c_adapter* i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_MT352
-
-static inline int mt352_write(struct dvb_frontend *fe, const u8 buf[], int len) {
-	int r = 0;
-	if (fe->ops.write)
-		r = fe->ops.write(fe, buf, len);
-	return r;
-}
-
-#endif // MT352_H
diff --git a/drivers/media/dvb/frontends/mt352_priv.h b/drivers/media/dvb/frontends/mt352_priv.h
deleted file mode 100644
index 44ad0d4..0000000
--- a/drivers/media/dvb/frontends/mt352_priv.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- *  Driver for Zarlink DVB-T MT352 demodulator
- *
- *  Written by Holger Waechtler <holger@qanu.de>
- *	 and Daniel Mack <daniel@qanu.de>
- *
- *  AVerMedia AVerTV DVB-T 771 support by
- *       Wolfram Joost <dbox2@frokaschwei.de>
- *
- *  Support for Samsung TDTC9251DH01C(M) tuner
- *  Copyright (C) 2004 Antonio Mancuso <antonio.mancuso@digitaltelevision.it>
- *                     Amauri  Celani  <acelani@essegi.net>
- *
- *  DVICO FusionHDTV DVB-T1 and DVICO FusionHDTV DVB-T Lite support by
- *       Christopher Pascoe <c.pascoe@itee.uq.edu.au>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
- */
-
-#ifndef _MT352_PRIV_
-#define _MT352_PRIV_
-
-#define ID_MT352        0x13
-
-#define msb(x) (((x) >> 8) & 0xff)
-#define lsb(x) ((x) & 0xff)
-
-enum mt352_reg_addr {
-	STATUS_0           = 0x00,
-	STATUS_1           = 0x01,
-	STATUS_2           = 0x02,
-	STATUS_3           = 0x03,
-	STATUS_4           = 0x04,
-	INTERRUPT_0        = 0x05,
-	INTERRUPT_1        = 0x06,
-	INTERRUPT_2        = 0x07,
-	INTERRUPT_3        = 0x08,
-	SNR                = 0x09,
-	VIT_ERR_CNT_2      = 0x0A,
-	VIT_ERR_CNT_1      = 0x0B,
-	VIT_ERR_CNT_0      = 0x0C,
-	RS_ERR_CNT_2       = 0x0D,
-	RS_ERR_CNT_1       = 0x0E,
-	RS_ERR_CNT_0       = 0x0F,
-	RS_UBC_1           = 0x10,
-	RS_UBC_0           = 0x11,
-	AGC_GAIN_3         = 0x12,
-	AGC_GAIN_2         = 0x13,
-	AGC_GAIN_1         = 0x14,
-	AGC_GAIN_0         = 0x15,
-	FREQ_OFFSET_2      = 0x17,
-	FREQ_OFFSET_1      = 0x18,
-	FREQ_OFFSET_0      = 0x19,
-	TIMING_OFFSET_1    = 0x1A,
-	TIMING_OFFSET_0    = 0x1B,
-	CHAN_FREQ_1        = 0x1C,
-	CHAN_FREQ_0        = 0x1D,
-	TPS_RECEIVED_1     = 0x1E,
-	TPS_RECEIVED_0     = 0x1F,
-	TPS_CURRENT_1      = 0x20,
-	TPS_CURRENT_0      = 0x21,
-	TPS_CELL_ID_1      = 0x22,
-	TPS_CELL_ID_0      = 0x23,
-	TPS_MISC_DATA_2    = 0x24,
-	TPS_MISC_DATA_1    = 0x25,
-	TPS_MISC_DATA_0    = 0x26,
-	RESET              = 0x50,
-	TPS_GIVEN_1        = 0x51,
-	TPS_GIVEN_0        = 0x52,
-	ACQ_CTL            = 0x53,
-	TRL_NOMINAL_RATE_1 = 0x54,
-	TRL_NOMINAL_RATE_0 = 0x55,
-	INPUT_FREQ_1       = 0x56,
-	INPUT_FREQ_0       = 0x57,
-	TUNER_ADDR         = 0x58,
-	CHAN_START_1       = 0x59,
-	CHAN_START_0       = 0x5A,
-	CONT_1             = 0x5B,
-	CONT_0             = 0x5C,
-	TUNER_GO           = 0x5D,
-	STATUS_EN_0        = 0x5F,
-	STATUS_EN_1        = 0x60,
-	INTERRUPT_EN_0     = 0x61,
-	INTERRUPT_EN_1     = 0x62,
-	INTERRUPT_EN_2     = 0x63,
-	INTERRUPT_EN_3     = 0x64,
-	AGC_TARGET         = 0x67,
-	AGC_CTL            = 0x68,
-	CAPT_RANGE         = 0x75,
-	SNR_SELECT_1       = 0x79,
-	SNR_SELECT_0       = 0x7A,
-	RS_ERR_PER_1       = 0x7C,
-	RS_ERR_PER_0       = 0x7D,
-	CHIP_ID            = 0x7F,
-	CHAN_STOP_1        = 0x80,
-	CHAN_STOP_0        = 0x81,
-	CHAN_STEP_1        = 0x82,
-	CHAN_STEP_0        = 0x83,
-	FEC_LOCK_TIME      = 0x85,
-	OFDM_LOCK_TIME     = 0x86,
-	ACQ_DELAY          = 0x87,
-	SCAN_CTL           = 0x88,
-	CLOCK_CTL          = 0x89,
-	CONFIG             = 0x8A,
-	MCLK_RATIO         = 0x8B,
-	GPP_CTL            = 0x8C,
-	ADC_CTL_1          = 0x8E,
-	ADC_CTL_0          = 0x8F
-};
-
-/* here we assume 1/6MHz == 166.66kHz stepsize */
-#define IF_FREQUENCYx6 217    /* 6 * 36.16666666667MHz */
-
-#endif                          /* _MT352_PRIV_ */
diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb/frontends/nxt200x.c
deleted file mode 100644
index 49ca78d..0000000
--- a/drivers/media/dvb/frontends/nxt200x.c
+++ /dev/null
@@ -1,1240 +0,0 @@
-/*
- *    Support for NXT2002 and NXT2004 - VSB/QAM
- *
- *    Copyright (C) 2005 Kirk Lapray <kirk.lapray@gmail.com>
- *    Copyright (C) 2006 Michael Krufky <mkrufky@m1k.net>
- *    based on nxt2002 by Taylor Jacob <rtjacob@earthlink.net>
- *    and nxt2004 by Jean-Francois Thibert <jeanfrancois@sagetv.com>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
-*/
-
-/*
- *                      NOTES ABOUT THIS DRIVER
- *
- * This Linux driver supports:
- *   B2C2/BBTI Technisat Air2PC - ATSC (NXT2002)
- *   AverTVHD MCE A180 (NXT2004)
- *   ATI HDTV Wonder (NXT2004)
- *
- * This driver needs external firmware. Please use the command
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2002" or
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2004" to
- * download/extract the appropriate firmware, and then copy it to
- * /usr/lib/hotplug/firmware/ or /lib/firmware/
- * (depending on configuration of firmware hotplug).
- */
-#define NXT2002_DEFAULT_FIRMWARE "dvb-fe-nxt2002.fw"
-#define NXT2004_DEFAULT_FIRMWARE "dvb-fe-nxt2004.fw"
-#define CRC_CCIT_MASK 0x1021
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-
-#include "dvb_frontend.h"
-#include "nxt200x.h"
-
-struct nxt200x_state {
-
-	struct i2c_adapter* i2c;
-	const struct nxt200x_config* config;
-	struct dvb_frontend frontend;
-
-	/* demodulator private data */
-	nxt_chip_type demod_chip;
-	u8 initialised:1;
-};
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "nxt200x: " args); \
-	} while (0)
-
-static int i2c_writebytes (struct nxt200x_state* state, u8 addr, u8 *buf, u8 len)
-{
-	int err;
-	struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = len };
-
-	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-		printk (KERN_WARNING "nxt200x: %s: i2c write error (addr 0x%02x, err == %i)\n",
-			__func__, addr, err);
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-
-static int i2c_readbytes(struct nxt200x_state *state, u8 addr, u8 *buf, u8 len)
-{
-	int err;
-	struct i2c_msg msg = { .addr = addr, .flags = I2C_M_RD, .buf = buf, .len = len };
-
-	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-		printk (KERN_WARNING "nxt200x: %s: i2c read error (addr 0x%02x, err == %i)\n",
-			__func__, addr, err);
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-
-static int nxt200x_writebytes (struct nxt200x_state* state, u8 reg,
-			       const u8 *buf, u8 len)
-{
-	u8 buf2 [len+1];
-	int err;
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf2, .len = len + 1 };
-
-	buf2[0] = reg;
-	memcpy(&buf2[1], buf, len);
-
-	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-		printk (KERN_WARNING "nxt200x: %s: i2c write error (addr 0x%02x, err == %i)\n",
-			__func__, state->config->demod_address, err);
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-
-static int nxt200x_readbytes(struct nxt200x_state *state, u8 reg, u8 *buf, u8 len)
-{
-	u8 reg2 [] = { reg };
-
-	struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = reg2, .len = 1 },
-			{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len } };
-
-	int err;
-
-	if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) {
-		printk (KERN_WARNING "nxt200x: %s: i2c read error (addr 0x%02x, err == %i)\n",
-			__func__, state->config->demod_address, err);
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-
-static u16 nxt200x_crc(u16 crc, u8 c)
-{
-	u8 i;
-	u16 input = (u16) c & 0xFF;
-
-	input<<=8;
-	for(i=0; i<8; i++) {
-		if((crc^input) & 0x8000)
-			crc=(crc<<1)^CRC_CCIT_MASK;
-		else
-			crc<<=1;
-		input<<=1;
-	}
-	return crc;
-}
-
-static int nxt200x_writereg_multibyte (struct nxt200x_state* state, u8 reg, u8* data, u8 len)
-{
-	u8 attr, len2, buf;
-	dprintk("%s\n", __func__);
-
-	/* set mutli register register */
-	nxt200x_writebytes(state, 0x35, &reg, 1);
-
-	/* send the actual data */
-	nxt200x_writebytes(state, 0x36, data, len);
-
-	switch (state->demod_chip) {
-		case NXT2002:
-			len2 = len;
-			buf = 0x02;
-			break;
-		case NXT2004:
-			/* probably not right, but gives correct values */
-			attr = 0x02;
-			if (reg & 0x80) {
-				attr = attr << 1;
-				if (reg & 0x04)
-					attr = attr >> 1;
-			}
-			/* set write bit */
-			len2 = ((attr << 4) | 0x10) | len;
-			buf = 0x80;
-			break;
-		default:
-			return -EINVAL;
-			break;
-	}
-
-	/* set multi register length */
-	nxt200x_writebytes(state, 0x34, &len2, 1);
-
-	/* toggle the multireg write bit */
-	nxt200x_writebytes(state, 0x21, &buf, 1);
-
-	nxt200x_readbytes(state, 0x21, &buf, 1);
-
-	switch (state->demod_chip) {
-		case NXT2002:
-			if ((buf & 0x02) == 0)
-				return 0;
-			break;
-		case NXT2004:
-			if (buf == 0)
-				return 0;
-			break;
-		default:
-			return -EINVAL;
-			break;
-	}
-
-	printk(KERN_WARNING "nxt200x: Error writing multireg register 0x%02X\n",reg);
-
-	return 0;
-}
-
-static int nxt200x_readreg_multibyte (struct nxt200x_state* state, u8 reg, u8* data, u8 len)
-{
-	int i;
-	u8 buf, len2, attr;
-	dprintk("%s\n", __func__);
-
-	/* set mutli register register */
-	nxt200x_writebytes(state, 0x35, &reg, 1);
-
-	switch (state->demod_chip) {
-		case NXT2002:
-			/* set multi register length */
-			len2 = len & 0x80;
-			nxt200x_writebytes(state, 0x34, &len2, 1);
-
-			/* read the actual data */
-			nxt200x_readbytes(state, reg, data, len);
-			return 0;
-			break;
-		case NXT2004:
-			/* probably not right, but gives correct values */
-			attr = 0x02;
-			if (reg & 0x80) {
-				attr = attr << 1;
-				if (reg & 0x04)
-					attr = attr >> 1;
-			}
-
-			/* set multi register length */
-			len2 = (attr << 4) | len;
-			nxt200x_writebytes(state, 0x34, &len2, 1);
-
-			/* toggle the multireg bit*/
-			buf = 0x80;
-			nxt200x_writebytes(state, 0x21, &buf, 1);
-
-			/* read the actual data */
-			for(i = 0; i < len; i++) {
-				nxt200x_readbytes(state, 0x36 + i, &data[i], 1);
-			}
-			return 0;
-			break;
-		default:
-			return -EINVAL;
-			break;
-	}
-}
-
-static void nxt200x_microcontroller_stop (struct nxt200x_state* state)
-{
-	u8 buf, stopval, counter = 0;
-	dprintk("%s\n", __func__);
-
-	/* set correct stop value */
-	switch (state->demod_chip) {
-		case NXT2002:
-			stopval = 0x40;
-			break;
-		case NXT2004:
-			stopval = 0x10;
-			break;
-		default:
-			stopval = 0;
-			break;
-	}
-
-	buf = 0x80;
-	nxt200x_writebytes(state, 0x22, &buf, 1);
-
-	while (counter < 20) {
-		nxt200x_readbytes(state, 0x31, &buf, 1);
-		if (buf & stopval)
-			return;
-		msleep(10);
-		counter++;
-	}
-
-	printk(KERN_WARNING "nxt200x: Timeout waiting for nxt200x to stop. This is ok after firmware upload.\n");
-	return;
-}
-
-static void nxt200x_microcontroller_start (struct nxt200x_state* state)
-{
-	u8 buf;
-	dprintk("%s\n", __func__);
-
-	buf = 0x00;
-	nxt200x_writebytes(state, 0x22, &buf, 1);
-}
-
-static void nxt2004_microcontroller_init (struct nxt200x_state* state)
-{
-	u8 buf[9];
-	u8 counter = 0;
-	dprintk("%s\n", __func__);
-
-	buf[0] = 0x00;
-	nxt200x_writebytes(state, 0x2b, buf, 1);
-	buf[0] = 0x70;
-	nxt200x_writebytes(state, 0x34, buf, 1);
-	buf[0] = 0x04;
-	nxt200x_writebytes(state, 0x35, buf, 1);
-	buf[0] = 0x01; buf[1] = 0x23; buf[2] = 0x45; buf[3] = 0x67; buf[4] = 0x89;
-	buf[5] = 0xAB; buf[6] = 0xCD; buf[7] = 0xEF; buf[8] = 0xC0;
-	nxt200x_writebytes(state, 0x36, buf, 9);
-	buf[0] = 0x80;
-	nxt200x_writebytes(state, 0x21, buf, 1);
-
-	while (counter < 20) {
-		nxt200x_readbytes(state, 0x21, buf, 1);
-		if (buf[0] == 0)
-			return;
-		msleep(10);
-		counter++;
-	}
-
-	printk(KERN_WARNING "nxt200x: Timeout waiting for nxt2004 to init.\n");
-
-	return;
-}
-
-static int nxt200x_writetuner (struct nxt200x_state* state, u8* data)
-{
-	u8 buf, count = 0;
-
-	dprintk("%s\n", __func__);
-
-	dprintk("Tuner Bytes: %02X %02X %02X %02X\n", data[1], data[2], data[3], data[4]);
-
-	/* if NXT2004, write directly to tuner. if NXT2002, write through NXT chip.
-	 * direct write is required for Philips TUV1236D and ALPS TDHU2 */
-	switch (state->demod_chip) {
-		case NXT2004:
-			if (i2c_writebytes(state, data[0], data+1, 4))
-				printk(KERN_WARNING "nxt200x: error writing to tuner\n");
-			/* wait until we have a lock */
-			while (count < 20) {
-				i2c_readbytes(state, data[0], &buf, 1);
-				if (buf & 0x40)
-					return 0;
-				msleep(100);
-				count++;
-			}
-			printk("nxt2004: timeout waiting for tuner lock\n");
-			break;
-		case NXT2002:
-			/* set the i2c transfer speed to the tuner */
-			buf = 0x03;
-			nxt200x_writebytes(state, 0x20, &buf, 1);
-
-			/* setup to transfer 4 bytes via i2c */
-			buf = 0x04;
-			nxt200x_writebytes(state, 0x34, &buf, 1);
-
-			/* write actual tuner bytes */
-			nxt200x_writebytes(state, 0x36, data+1, 4);
-
-			/* set tuner i2c address */
-			buf = data[0] << 1;
-			nxt200x_writebytes(state, 0x35, &buf, 1);
-
-			/* write UC Opmode to begin transfer */
-			buf = 0x80;
-			nxt200x_writebytes(state, 0x21, &buf, 1);
-
-			while (count < 20) {
-				nxt200x_readbytes(state, 0x21, &buf, 1);
-				if ((buf & 0x80)== 0x00)
-					return 0;
-				msleep(100);
-				count++;
-			}
-			printk("nxt2002: timeout error writing tuner\n");
-			break;
-		default:
-			return -EINVAL;
-			break;
-	}
-	return 0;
-}
-
-static void nxt200x_agc_reset(struct nxt200x_state* state)
-{
-	u8 buf;
-	dprintk("%s\n", __func__);
-
-	switch (state->demod_chip) {
-		case NXT2002:
-			buf = 0x08;
-			nxt200x_writebytes(state, 0x08, &buf, 1);
-			buf = 0x00;
-			nxt200x_writebytes(state, 0x08, &buf, 1);
-			break;
-		case NXT2004:
-			nxt200x_readreg_multibyte(state, 0x08, &buf, 1);
-			buf = 0x08;
-			nxt200x_writereg_multibyte(state, 0x08, &buf, 1);
-			buf = 0x00;
-			nxt200x_writereg_multibyte(state, 0x08, &buf, 1);
-			break;
-		default:
-			break;
-	}
-	return;
-}
-
-static int nxt2002_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
-{
-
-	struct nxt200x_state* state = fe->demodulator_priv;
-	u8 buf[3], written = 0, chunkpos = 0;
-	u16 rambase, position, crc = 0;
-
-	dprintk("%s\n", __func__);
-	dprintk("Firmware is %zu bytes\n", fw->size);
-
-	/* Get the RAM base for this nxt2002 */
-	nxt200x_readbytes(state, 0x10, buf, 1);
-
-	if (buf[0] & 0x10)
-		rambase = 0x1000;
-	else
-		rambase = 0x0000;
-
-	dprintk("rambase on this nxt2002 is %04X\n", rambase);
-
-	/* Hold the micro in reset while loading firmware */
-	buf[0] = 0x80;
-	nxt200x_writebytes(state, 0x2B, buf, 1);
-
-	for (position = 0; position < fw->size; position++) {
-		if (written == 0) {
-			crc = 0;
-			chunkpos = 0x28;
-			buf[0] = ((rambase + position) >> 8);
-			buf[1] = (rambase + position) & 0xFF;
-			buf[2] = 0x81;
-			/* write starting address */
-			nxt200x_writebytes(state, 0x29, buf, 3);
-		}
-		written++;
-		chunkpos++;
-
-		if ((written % 4) == 0)
-			nxt200x_writebytes(state, chunkpos, &fw->data[position-3], 4);
-
-		crc = nxt200x_crc(crc, fw->data[position]);
-
-		if ((written == 255) || (position+1 == fw->size)) {
-			/* write remaining bytes of firmware */
-			nxt200x_writebytes(state, chunkpos+4-(written %4),
-				&fw->data[position-(written %4) + 1],
-				written %4);
-			buf[0] = crc << 8;
-			buf[1] = crc & 0xFF;
-
-			/* write crc */
-			nxt200x_writebytes(state, 0x2C, buf, 2);
-
-			/* do a read to stop things */
-			nxt200x_readbytes(state, 0x2A, buf, 1);
-
-			/* set transfer mode to complete */
-			buf[0] = 0x80;
-			nxt200x_writebytes(state, 0x2B, buf, 1);
-
-			written = 0;
-		}
-	}
-
-	return 0;
-};
-
-static int nxt2004_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
-{
-
-	struct nxt200x_state* state = fe->demodulator_priv;
-	u8 buf[3];
-	u16 rambase, position, crc=0;
-
-	dprintk("%s\n", __func__);
-	dprintk("Firmware is %zu bytes\n", fw->size);
-
-	/* set rambase */
-	rambase = 0x1000;
-
-	/* hold the micro in reset while loading firmware */
-	buf[0] = 0x80;
-	nxt200x_writebytes(state, 0x2B, buf,1);
-
-	/* calculate firmware CRC */
-	for (position = 0; position < fw->size; position++) {
-		crc = nxt200x_crc(crc, fw->data[position]);
-	}
-
-	buf[0] = rambase >> 8;
-	buf[1] = rambase & 0xFF;
-	buf[2] = 0x81;
-	/* write starting address */
-	nxt200x_writebytes(state,0x29,buf,3);
-
-	for (position = 0; position < fw->size;) {
-		nxt200x_writebytes(state, 0x2C, &fw->data[position],
-			fw->size-position > 255 ? 255 : fw->size-position);
-		position += (fw->size-position > 255 ? 255 : fw->size-position);
-	}
-	buf[0] = crc >> 8;
-	buf[1] = crc & 0xFF;
-
-	dprintk("firmware crc is 0x%02X 0x%02X\n", buf[0], buf[1]);
-
-	/* write crc */
-	nxt200x_writebytes(state, 0x2C, buf,2);
-
-	/* do a read to stop things */
-	nxt200x_readbytes(state, 0x2C, buf, 1);
-
-	/* set transfer mode to complete */
-	buf[0] = 0x80;
-	nxt200x_writebytes(state, 0x2B, buf,1);
-
-	return 0;
-};
-
-static int nxt200x_setup_frontend_parameters(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct nxt200x_state* state = fe->demodulator_priv;
-	u8 buf[5];
-
-	/* stop the micro first */
-	nxt200x_microcontroller_stop(state);
-
-	if (state->demod_chip == NXT2004) {
-		/* make sure demod is set to digital */
-		buf[0] = 0x04;
-		nxt200x_writebytes(state, 0x14, buf, 1);
-		buf[0] = 0x00;
-		nxt200x_writebytes(state, 0x17, buf, 1);
-	}
-
-	/* set additional params */
-	switch (p->modulation) {
-		case QAM_64:
-		case QAM_256:
-			/* Set punctured clock for QAM */
-			/* This is just a guess since I am unable to test it */
-			if (state->config->set_ts_params)
-				state->config->set_ts_params(fe, 1);
-			break;
-		case VSB_8:
-			/* Set non-punctured clock for VSB */
-			if (state->config->set_ts_params)
-				state->config->set_ts_params(fe, 0);
-			break;
-		default:
-			return -EINVAL;
-			break;
-	}
-
-	if (fe->ops.tuner_ops.calc_regs) {
-		/* get tuning information */
-		fe->ops.tuner_ops.calc_regs(fe, buf, 5);
-
-		/* write frequency information */
-		nxt200x_writetuner(state, buf);
-	}
-
-	/* reset the agc now that tuning has been completed */
-	nxt200x_agc_reset(state);
-
-	/* set target power level */
-	switch (p->modulation) {
-		case QAM_64:
-		case QAM_256:
-			buf[0] = 0x74;
-			break;
-		case VSB_8:
-			buf[0] = 0x70;
-			break;
-		default:
-			return -EINVAL;
-			break;
-	}
-	nxt200x_writebytes(state, 0x42, buf, 1);
-
-	/* configure sdm */
-	switch (state->demod_chip) {
-		case NXT2002:
-			buf[0] = 0x87;
-			break;
-		case NXT2004:
-			buf[0] = 0x07;
-			break;
-		default:
-			return -EINVAL;
-			break;
-	}
-	nxt200x_writebytes(state, 0x57, buf, 1);
-
-	/* write sdm1 input */
-	buf[0] = 0x10;
-	buf[1] = 0x00;
-	switch (state->demod_chip) {
-		case NXT2002:
-			nxt200x_writereg_multibyte(state, 0x58, buf, 2);
-			break;
-		case NXT2004:
-			nxt200x_writebytes(state, 0x58, buf, 2);
-			break;
-		default:
-			return -EINVAL;
-			break;
-	}
-
-	/* write sdmx input */
-	switch (p->modulation) {
-		case QAM_64:
-				buf[0] = 0x68;
-				break;
-		case QAM_256:
-				buf[0] = 0x64;
-				break;
-		case VSB_8:
-				buf[0] = 0x60;
-				break;
-		default:
-				return -EINVAL;
-				break;
-	}
-	buf[1] = 0x00;
-	switch (state->demod_chip) {
-		case NXT2002:
-			nxt200x_writereg_multibyte(state, 0x5C, buf, 2);
-			break;
-		case NXT2004:
-			nxt200x_writebytes(state, 0x5C, buf, 2);
-			break;
-		default:
-			return -EINVAL;
-			break;
-	}
-
-	/* write adc power lpf fc */
-	buf[0] = 0x05;
-	nxt200x_writebytes(state, 0x43, buf, 1);
-
-	if (state->demod_chip == NXT2004) {
-		/* write ??? */
-		buf[0] = 0x00;
-		buf[1] = 0x00;
-		nxt200x_writebytes(state, 0x46, buf, 2);
-	}
-
-	/* write accumulator2 input */
-	buf[0] = 0x80;
-	buf[1] = 0x00;
-	switch (state->demod_chip) {
-		case NXT2002:
-			nxt200x_writereg_multibyte(state, 0x4B, buf, 2);
-			break;
-		case NXT2004:
-			nxt200x_writebytes(state, 0x4B, buf, 2);
-			break;
-		default:
-			return -EINVAL;
-			break;
-	}
-
-	/* write kg1 */
-	buf[0] = 0x00;
-	nxt200x_writebytes(state, 0x4D, buf, 1);
-
-	/* write sdm12 lpf fc */
-	buf[0] = 0x44;
-	nxt200x_writebytes(state, 0x55, buf, 1);
-
-	/* write agc control reg */
-	buf[0] = 0x04;
-	nxt200x_writebytes(state, 0x41, buf, 1);
-
-	if (state->demod_chip == NXT2004) {
-		nxt200x_readreg_multibyte(state, 0x80, buf, 1);
-		buf[0] = 0x24;
-		nxt200x_writereg_multibyte(state, 0x80, buf, 1);
-
-		/* soft reset? */
-		nxt200x_readreg_multibyte(state, 0x08, buf, 1);
-		buf[0] = 0x10;
-		nxt200x_writereg_multibyte(state, 0x08, buf, 1);
-		nxt200x_readreg_multibyte(state, 0x08, buf, 1);
-		buf[0] = 0x00;
-		nxt200x_writereg_multibyte(state, 0x08, buf, 1);
-
-		nxt200x_readreg_multibyte(state, 0x80, buf, 1);
-		buf[0] = 0x04;
-		nxt200x_writereg_multibyte(state, 0x80, buf, 1);
-		buf[0] = 0x00;
-		nxt200x_writereg_multibyte(state, 0x81, buf, 1);
-		buf[0] = 0x80; buf[1] = 0x00; buf[2] = 0x00;
-		nxt200x_writereg_multibyte(state, 0x82, buf, 3);
-		nxt200x_readreg_multibyte(state, 0x88, buf, 1);
-		buf[0] = 0x11;
-		nxt200x_writereg_multibyte(state, 0x88, buf, 1);
-		nxt200x_readreg_multibyte(state, 0x80, buf, 1);
-		buf[0] = 0x44;
-		nxt200x_writereg_multibyte(state, 0x80, buf, 1);
-	}
-
-	/* write agc ucgp0 */
-	switch (p->modulation) {
-		case QAM_64:
-				buf[0] = 0x02;
-				break;
-		case QAM_256:
-				buf[0] = 0x03;
-				break;
-		case VSB_8:
-				buf[0] = 0x00;
-				break;
-		default:
-				return -EINVAL;
-				break;
-	}
-	nxt200x_writebytes(state, 0x30, buf, 1);
-
-	/* write agc control reg */
-	buf[0] = 0x00;
-	nxt200x_writebytes(state, 0x41, buf, 1);
-
-	/* write accumulator2 input */
-	buf[0] = 0x80;
-	buf[1] = 0x00;
-	switch (state->demod_chip) {
-		case NXT2002:
-			nxt200x_writereg_multibyte(state, 0x49, buf, 2);
-			nxt200x_writereg_multibyte(state, 0x4B, buf, 2);
-			break;
-		case NXT2004:
-			nxt200x_writebytes(state, 0x49, buf, 2);
-			nxt200x_writebytes(state, 0x4B, buf, 2);
-			break;
-		default:
-			return -EINVAL;
-			break;
-	}
-
-	/* write agc control reg */
-	buf[0] = 0x04;
-	nxt200x_writebytes(state, 0x41, buf, 1);
-
-	nxt200x_microcontroller_start(state);
-
-	if (state->demod_chip == NXT2004) {
-		nxt2004_microcontroller_init(state);
-
-		/* ???? */
-		buf[0] = 0xF0;
-		buf[1] = 0x00;
-		nxt200x_writebytes(state, 0x5C, buf, 2);
-	}
-
-	/* adjacent channel detection should be done here, but I don't
-	have any stations with this need so I cannot test it */
-
-	return 0;
-}
-
-static int nxt200x_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct nxt200x_state* state = fe->demodulator_priv;
-	u8 lock;
-	nxt200x_readbytes(state, 0x31, &lock, 1);
-
-	*status = 0;
-	if (lock & 0x20) {
-		*status |= FE_HAS_SIGNAL;
-		*status |= FE_HAS_CARRIER;
-		*status |= FE_HAS_VITERBI;
-		*status |= FE_HAS_SYNC;
-		*status |= FE_HAS_LOCK;
-	}
-	return 0;
-}
-
-static int nxt200x_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct nxt200x_state* state = fe->demodulator_priv;
-	u8 b[3];
-
-	nxt200x_readreg_multibyte(state, 0xE6, b, 3);
-
-	*ber = ((b[0] << 8) + b[1]) * 8;
-
-	return 0;
-}
-
-static int nxt200x_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	struct nxt200x_state* state = fe->demodulator_priv;
-	u8 b[2];
-	u16 temp = 0;
-
-	/* setup to read cluster variance */
-	b[0] = 0x00;
-	nxt200x_writebytes(state, 0xA1, b, 1);
-
-	/* get multreg val */
-	nxt200x_readreg_multibyte(state, 0xA6, b, 2);
-
-	temp = (b[0] << 8) | b[1];
-	*strength = ((0x7FFF - temp) & 0x0FFF) * 16;
-
-	return 0;
-}
-
-static int nxt200x_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-
-	struct nxt200x_state* state = fe->demodulator_priv;
-	u8 b[2];
-	u16 temp = 0, temp2;
-	u32 snrdb = 0;
-
-	/* setup to read cluster variance */
-	b[0] = 0x00;
-	nxt200x_writebytes(state, 0xA1, b, 1);
-
-	/* get multreg val from 0xA6 */
-	nxt200x_readreg_multibyte(state, 0xA6, b, 2);
-
-	temp = (b[0] << 8) | b[1];
-	temp2 = 0x7FFF - temp;
-
-	/* snr will be in db */
-	if (temp2 > 0x7F00)
-		snrdb = 1000*24 + ( 1000*(30-24) * ( temp2 - 0x7F00 ) / ( 0x7FFF - 0x7F00 ) );
-	else if (temp2 > 0x7EC0)
-		snrdb = 1000*18 + ( 1000*(24-18) * ( temp2 - 0x7EC0 ) / ( 0x7F00 - 0x7EC0 ) );
-	else if (temp2 > 0x7C00)
-		snrdb = 1000*12 + ( 1000*(18-12) * ( temp2 - 0x7C00 ) / ( 0x7EC0 - 0x7C00 ) );
-	else
-		snrdb = 1000*0 + ( 1000*(12-0) * ( temp2 - 0 ) / ( 0x7C00 - 0 ) );
-
-	/* the value reported back from the frontend will be FFFF=32db 0000=0db */
-	*snr = snrdb * (0xFFFF/32000);
-
-	return 0;
-}
-
-static int nxt200x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct nxt200x_state* state = fe->demodulator_priv;
-	u8 b[3];
-
-	nxt200x_readreg_multibyte(state, 0xE6, b, 3);
-	*ucblocks = b[2];
-
-	return 0;
-}
-
-static int nxt200x_sleep(struct dvb_frontend* fe)
-{
-	return 0;
-}
-
-static int nxt2002_init(struct dvb_frontend* fe)
-{
-	struct nxt200x_state* state = fe->demodulator_priv;
-	const struct firmware *fw;
-	int ret;
-	u8 buf[2];
-
-	/* request the firmware, this will block until someone uploads it */
-	printk("nxt2002: Waiting for firmware upload (%s)...\n", NXT2002_DEFAULT_FIRMWARE);
-	ret = request_firmware(&fw, NXT2002_DEFAULT_FIRMWARE,
-			       state->i2c->dev.parent);
-	printk("nxt2002: Waiting for firmware upload(2)...\n");
-	if (ret) {
-		printk("nxt2002: No firmware uploaded (timeout or file not found?)\n");
-		return ret;
-	}
-
-	ret = nxt2002_load_firmware(fe, fw);
-	release_firmware(fw);
-	if (ret) {
-		printk("nxt2002: Writing firmware to device failed\n");
-		return ret;
-	}
-	printk("nxt2002: Firmware upload complete\n");
-
-	/* Put the micro into reset */
-	nxt200x_microcontroller_stop(state);
-
-	/* ensure transfer is complete */
-	buf[0]=0x00;
-	nxt200x_writebytes(state, 0x2B, buf, 1);
-
-	/* Put the micro into reset for real this time */
-	nxt200x_microcontroller_stop(state);
-
-	/* soft reset everything (agc,frontend,eq,fec)*/
-	buf[0] = 0x0F;
-	nxt200x_writebytes(state, 0x08, buf, 1);
-	buf[0] = 0x00;
-	nxt200x_writebytes(state, 0x08, buf, 1);
-
-	/* write agc sdm configure */
-	buf[0] = 0xF1;
-	nxt200x_writebytes(state, 0x57, buf, 1);
-
-	/* write mod output format */
-	buf[0] = 0x20;
-	nxt200x_writebytes(state, 0x09, buf, 1);
-
-	/* write fec mpeg mode */
-	buf[0] = 0x7E;
-	buf[1] = 0x00;
-	nxt200x_writebytes(state, 0xE9, buf, 2);
-
-	/* write mux selection */
-	buf[0] = 0x00;
-	nxt200x_writebytes(state, 0xCC, buf, 1);
-
-	return 0;
-}
-
-static int nxt2004_init(struct dvb_frontend* fe)
-{
-	struct nxt200x_state* state = fe->demodulator_priv;
-	const struct firmware *fw;
-	int ret;
-	u8 buf[3];
-
-	/* ??? */
-	buf[0]=0x00;
-	nxt200x_writebytes(state, 0x1E, buf, 1);
-
-	/* request the firmware, this will block until someone uploads it */
-	printk("nxt2004: Waiting for firmware upload (%s)...\n", NXT2004_DEFAULT_FIRMWARE);
-	ret = request_firmware(&fw, NXT2004_DEFAULT_FIRMWARE,
-			       state->i2c->dev.parent);
-	printk("nxt2004: Waiting for firmware upload(2)...\n");
-	if (ret) {
-		printk("nxt2004: No firmware uploaded (timeout or file not found?)\n");
-		return ret;
-	}
-
-	ret = nxt2004_load_firmware(fe, fw);
-	release_firmware(fw);
-	if (ret) {
-		printk("nxt2004: Writing firmware to device failed\n");
-		return ret;
-	}
-	printk("nxt2004: Firmware upload complete\n");
-
-	/* ensure transfer is complete */
-	buf[0] = 0x01;
-	nxt200x_writebytes(state, 0x19, buf, 1);
-
-	nxt2004_microcontroller_init(state);
-	nxt200x_microcontroller_stop(state);
-	nxt200x_microcontroller_stop(state);
-	nxt2004_microcontroller_init(state);
-	nxt200x_microcontroller_stop(state);
-
-	/* soft reset everything (agc,frontend,eq,fec)*/
-	buf[0] = 0xFF;
-	nxt200x_writereg_multibyte(state, 0x08, buf, 1);
-	buf[0] = 0x00;
-	nxt200x_writereg_multibyte(state, 0x08, buf, 1);
-
-	/* write agc sdm configure */
-	buf[0] = 0xD7;
-	nxt200x_writebytes(state, 0x57, buf, 1);
-
-	/* ???*/
-	buf[0] = 0x07;
-	buf[1] = 0xfe;
-	nxt200x_writebytes(state, 0x35, buf, 2);
-	buf[0] = 0x12;
-	nxt200x_writebytes(state, 0x34, buf, 1);
-	buf[0] = 0x80;
-	nxt200x_writebytes(state, 0x21, buf, 1);
-
-	/* ???*/
-	buf[0] = 0x21;
-	nxt200x_writebytes(state, 0x0A, buf, 1);
-
-	/* ???*/
-	buf[0] = 0x01;
-	nxt200x_writereg_multibyte(state, 0x80, buf, 1);
-
-	/* write fec mpeg mode */
-	buf[0] = 0x7E;
-	buf[1] = 0x00;
-	nxt200x_writebytes(state, 0xE9, buf, 2);
-
-	/* write mux selection */
-	buf[0] = 0x00;
-	nxt200x_writebytes(state, 0xCC, buf, 1);
-
-	/* ???*/
-	nxt200x_readreg_multibyte(state, 0x80, buf, 1);
-	buf[0] = 0x00;
-	nxt200x_writereg_multibyte(state, 0x80, buf, 1);
-
-	/* soft reset? */
-	nxt200x_readreg_multibyte(state, 0x08, buf, 1);
-	buf[0] = 0x10;
-	nxt200x_writereg_multibyte(state, 0x08, buf, 1);
-	nxt200x_readreg_multibyte(state, 0x08, buf, 1);
-	buf[0] = 0x00;
-	nxt200x_writereg_multibyte(state, 0x08, buf, 1);
-
-	/* ???*/
-	nxt200x_readreg_multibyte(state, 0x80, buf, 1);
-	buf[0] = 0x01;
-	nxt200x_writereg_multibyte(state, 0x80, buf, 1);
-	buf[0] = 0x70;
-	nxt200x_writereg_multibyte(state, 0x81, buf, 1);
-	buf[0] = 0x31; buf[1] = 0x5E; buf[2] = 0x66;
-	nxt200x_writereg_multibyte(state, 0x82, buf, 3);
-
-	nxt200x_readreg_multibyte(state, 0x88, buf, 1);
-	buf[0] = 0x11;
-	nxt200x_writereg_multibyte(state, 0x88, buf, 1);
-	nxt200x_readreg_multibyte(state, 0x80, buf, 1);
-	buf[0] = 0x40;
-	nxt200x_writereg_multibyte(state, 0x80, buf, 1);
-
-	nxt200x_readbytes(state, 0x10, buf, 1);
-	buf[0] = 0x10;
-	nxt200x_writebytes(state, 0x10, buf, 1);
-	nxt200x_readbytes(state, 0x0A, buf, 1);
-	buf[0] = 0x21;
-	nxt200x_writebytes(state, 0x0A, buf, 1);
-
-	nxt2004_microcontroller_init(state);
-
-	buf[0] = 0x21;
-	nxt200x_writebytes(state, 0x0A, buf, 1);
-	buf[0] = 0x7E;
-	nxt200x_writebytes(state, 0xE9, buf, 1);
-	buf[0] = 0x00;
-	nxt200x_writebytes(state, 0xEA, buf, 1);
-
-	nxt200x_readreg_multibyte(state, 0x80, buf, 1);
-	buf[0] = 0x00;
-	nxt200x_writereg_multibyte(state, 0x80, buf, 1);
-	nxt200x_readreg_multibyte(state, 0x80, buf, 1);
-	buf[0] = 0x00;
-	nxt200x_writereg_multibyte(state, 0x80, buf, 1);
-
-	/* soft reset? */
-	nxt200x_readreg_multibyte(state, 0x08, buf, 1);
-	buf[0] = 0x10;
-	nxt200x_writereg_multibyte(state, 0x08, buf, 1);
-	nxt200x_readreg_multibyte(state, 0x08, buf, 1);
-	buf[0] = 0x00;
-	nxt200x_writereg_multibyte(state, 0x08, buf, 1);
-
-	nxt200x_readreg_multibyte(state, 0x80, buf, 1);
-	buf[0] = 0x04;
-	nxt200x_writereg_multibyte(state, 0x80, buf, 1);
-	buf[0] = 0x00;
-	nxt200x_writereg_multibyte(state, 0x81, buf, 1);
-	buf[0] = 0x80; buf[1] = 0x00; buf[2] = 0x00;
-	nxt200x_writereg_multibyte(state, 0x82, buf, 3);
-
-	nxt200x_readreg_multibyte(state, 0x88, buf, 1);
-	buf[0] = 0x11;
-	nxt200x_writereg_multibyte(state, 0x88, buf, 1);
-
-	nxt200x_readreg_multibyte(state, 0x80, buf, 1);
-	buf[0] = 0x44;
-	nxt200x_writereg_multibyte(state, 0x80, buf, 1);
-
-	/* initialize tuner */
-	nxt200x_readbytes(state, 0x10, buf, 1);
-	buf[0] = 0x12;
-	nxt200x_writebytes(state, 0x10, buf, 1);
-	buf[0] = 0x04;
-	nxt200x_writebytes(state, 0x13, buf, 1);
-	buf[0] = 0x00;
-	nxt200x_writebytes(state, 0x16, buf, 1);
-	buf[0] = 0x04;
-	nxt200x_writebytes(state, 0x14, buf, 1);
-	buf[0] = 0x00;
-	nxt200x_writebytes(state, 0x14, buf, 1);
-	nxt200x_writebytes(state, 0x17, buf, 1);
-	nxt200x_writebytes(state, 0x14, buf, 1);
-	nxt200x_writebytes(state, 0x17, buf, 1);
-
-	return 0;
-}
-
-static int nxt200x_init(struct dvb_frontend* fe)
-{
-	struct nxt200x_state* state = fe->demodulator_priv;
-	int ret = 0;
-
-	if (!state->initialised) {
-		switch (state->demod_chip) {
-			case NXT2002:
-				ret = nxt2002_init(fe);
-				break;
-			case NXT2004:
-				ret = nxt2004_init(fe);
-				break;
-			default:
-				return -EINVAL;
-				break;
-		}
-		state->initialised = 1;
-	}
-	return ret;
-}
-
-static int nxt200x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
-{
-	fesettings->min_delay_ms = 500;
-	fesettings->step_size = 0;
-	fesettings->max_drift = 0;
-	return 0;
-}
-
-static void nxt200x_release(struct dvb_frontend* fe)
-{
-	struct nxt200x_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops nxt200x_ops;
-
-struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config,
-				   struct i2c_adapter* i2c)
-{
-	struct nxt200x_state* state = NULL;
-	u8 buf [] = {0,0,0,0,0};
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct nxt200x_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->initialised = 0;
-
-	/* read card id */
-	nxt200x_readbytes(state, 0x00, buf, 5);
-	dprintk("NXT info: %02X %02X %02X %02X %02X\n",
-		buf[0], buf[1], buf[2],	buf[3], buf[4]);
-
-	/* set demod chip */
-	switch (buf[0]) {
-		case 0x04:
-			state->demod_chip = NXT2002;
-			printk("nxt200x: NXT2002 Detected\n");
-			break;
-		case 0x05:
-			state->demod_chip = NXT2004;
-			printk("nxt200x: NXT2004 Detected\n");
-			break;
-		default:
-			goto error;
-	}
-
-	/* make sure demod chip is supported */
-	switch (state->demod_chip) {
-		case NXT2002:
-			if (buf[0] != 0x04) goto error;		/* device id */
-			if (buf[1] != 0x02) goto error;		/* fab id */
-			if (buf[2] != 0x11) goto error;		/* month */
-			if (buf[3] != 0x20) goto error;		/* year msb */
-			if (buf[4] != 0x00) goto error;		/* year lsb */
-			break;
-		case NXT2004:
-			if (buf[0] != 0x05) goto error;		/* device id */
-			break;
-		default:
-			goto error;
-	}
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &nxt200x_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	printk("Unknown/Unsupported NXT chip: %02X %02X %02X %02X %02X\n",
-		buf[0], buf[1], buf[2], buf[3], buf[4]);
-	return NULL;
-}
-
-static struct dvb_frontend_ops nxt200x_ops = {
-	.delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
-	.info = {
-		.name = "Nextwave NXT200X VSB/QAM frontend",
-		.frequency_min =  54000000,
-		.frequency_max = 860000000,
-		.frequency_stepsize = 166666,	/* stepsize is just a guess */
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_8VSB | FE_CAN_QAM_64 | FE_CAN_QAM_256
-	},
-
-	.release = nxt200x_release,
-
-	.init = nxt200x_init,
-	.sleep = nxt200x_sleep,
-
-	.set_frontend = nxt200x_setup_frontend_parameters,
-	.get_tune_settings = nxt200x_get_tune_settings,
-
-	.read_status = nxt200x_read_status,
-	.read_ber = nxt200x_read_ber,
-	.read_signal_strength = nxt200x_read_signal_strength,
-	.read_snr = nxt200x_read_snr,
-	.read_ucblocks = nxt200x_read_ucblocks,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("NXT200X (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver");
-MODULE_AUTHOR("Kirk Lapray, Michael Krufky, Jean-Francois Thibert, and Taylor Jacob");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(nxt200x_attach);
-
diff --git a/drivers/media/dvb/frontends/nxt200x.h b/drivers/media/dvb/frontends/nxt200x.h
deleted file mode 100644
index f3c8458..0000000
--- a/drivers/media/dvb/frontends/nxt200x.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *    Support for NXT2002 and NXT2004 - VSB/QAM
- *
- *    Copyright (C) 2005 Kirk Lapray (kirk.lapray@gmail.com)
- *    based on nxt2002 by Taylor Jacob <rtjacob@earthlink.net>
- *    and nxt2004 by Jean-Francois Thibert (jeanfrancois@sagetv.com)
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
-*/
-
-#ifndef NXT200X_H
-#define NXT200X_H
-
-#include <linux/dvb/frontend.h>
-#include <linux/firmware.h>
-
-typedef enum nxt_chip_t {
-		NXTUNDEFINED,
-		NXT2002,
-		NXT2004
-}nxt_chip_type;
-
-struct nxt200x_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* need to set device param for start_dma */
-	int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
-};
-
-#if defined(CONFIG_DVB_NXT200X) || (defined(CONFIG_DVB_NXT200X_MODULE) && defined(MODULE))
-extern struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config,
-					   struct i2c_adapter* i2c);
-#else
-static inline struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config,
-					   struct i2c_adapter* i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_NXT200X
-
-#endif /* NXT200X_H */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/frontends/nxt6000.c b/drivers/media/dvb/frontends/nxt6000.c
deleted file mode 100644
index 90ae6c7..0000000
--- a/drivers/media/dvb/frontends/nxt6000.c
+++ /dev/null
@@ -1,616 +0,0 @@
-/*
-	NxtWave Communications - NXT6000 demodulator driver
-
-    Copyright (C) 2002-2003 Florian Schirmer <jolt@tuxbox.org>
-    Copyright (C) 2003 Paul Andreassen <paul@andreassen.com.au>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "nxt6000_priv.h"
-#include "nxt6000.h"
-
-
-
-struct nxt6000_state {
-	struct i2c_adapter* i2c;
-	/* configuration settings */
-	const struct nxt6000_config* config;
-	struct dvb_frontend frontend;
-};
-
-static int debug;
-#define dprintk if (debug) printk
-
-static int nxt6000_writereg(struct nxt6000_state* state, u8 reg, u8 data)
-{
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg = {.addr = state->config->demod_address,.flags = 0,.buf = buf,.len = 2 };
-	int ret;
-
-	if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1)
-		dprintk("nxt6000: nxt6000_write error (reg: 0x%02X, data: 0x%02X, ret: %d)\n", reg, data, ret);
-
-	return (ret != 1) ? -EIO : 0;
-}
-
-static u8 nxt6000_readreg(struct nxt6000_state* state, u8 reg)
-{
-	int ret;
-	u8 b0[] = { reg };
-	u8 b1[] = { 0 };
-	struct i2c_msg msgs[] = {
-		{.addr = state->config->demod_address,.flags = 0,.buf = b0,.len = 1},
-		{.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = b1,.len = 1}
-	};
-
-	ret = i2c_transfer(state->i2c, msgs, 2);
-
-	if (ret != 2)
-		dprintk("nxt6000: nxt6000_read error (reg: 0x%02X, ret: %d)\n", reg, ret);
-
-	return b1[0];
-}
-
-static void nxt6000_reset(struct nxt6000_state* state)
-{
-	u8 val;
-
-	val = nxt6000_readreg(state, OFDM_COR_CTL);
-
-	nxt6000_writereg(state, OFDM_COR_CTL, val & ~COREACT);
-	nxt6000_writereg(state, OFDM_COR_CTL, val | COREACT);
-}
-
-static int nxt6000_set_bandwidth(struct nxt6000_state *state, u32 bandwidth)
-{
-	u16 nominal_rate;
-	int result;
-
-	switch (bandwidth) {
-	case 6000000:
-		nominal_rate = 0x55B7;
-		break;
-
-	case 7000000:
-		nominal_rate = 0x6400;
-		break;
-
-	case 8000000:
-		nominal_rate = 0x7249;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	if ((result = nxt6000_writereg(state, OFDM_TRL_NOMINALRATE_1, nominal_rate & 0xFF)) < 0)
-		return result;
-
-	return nxt6000_writereg(state, OFDM_TRL_NOMINALRATE_2, (nominal_rate >> 8) & 0xFF);
-}
-
-static int nxt6000_set_guard_interval(struct nxt6000_state* state, fe_guard_interval_t guard_interval)
-{
-	switch (guard_interval) {
-
-	case GUARD_INTERVAL_1_32:
-		return nxt6000_writereg(state, OFDM_COR_MODEGUARD, 0x00 | (nxt6000_readreg(state, OFDM_COR_MODEGUARD) & ~0x03));
-
-	case GUARD_INTERVAL_1_16:
-		return nxt6000_writereg(state, OFDM_COR_MODEGUARD, 0x01 | (nxt6000_readreg(state, OFDM_COR_MODEGUARD) & ~0x03));
-
-	case GUARD_INTERVAL_AUTO:
-	case GUARD_INTERVAL_1_8:
-		return nxt6000_writereg(state, OFDM_COR_MODEGUARD, 0x02 | (nxt6000_readreg(state, OFDM_COR_MODEGUARD) & ~0x03));
-
-	case GUARD_INTERVAL_1_4:
-		return nxt6000_writereg(state, OFDM_COR_MODEGUARD, 0x03 | (nxt6000_readreg(state, OFDM_COR_MODEGUARD) & ~0x03));
-
-	default:
-		return -EINVAL;
-	}
-}
-
-static int nxt6000_set_inversion(struct nxt6000_state* state, fe_spectral_inversion_t inversion)
-{
-	switch (inversion) {
-
-	case INVERSION_OFF:
-		return nxt6000_writereg(state, OFDM_ITB_CTL, 0x00);
-
-	case INVERSION_ON:
-		return nxt6000_writereg(state, OFDM_ITB_CTL, ITBINV);
-
-	default:
-		return -EINVAL;
-
-	}
-}
-
-static int nxt6000_set_transmission_mode(struct nxt6000_state* state, fe_transmit_mode_t transmission_mode)
-{
-	int result;
-
-	switch (transmission_mode) {
-
-	case TRANSMISSION_MODE_2K:
-		if ((result = nxt6000_writereg(state, EN_DMD_RACQ, 0x00 | (nxt6000_readreg(state, EN_DMD_RACQ) & ~0x03))) < 0)
-			return result;
-
-		return nxt6000_writereg(state, OFDM_COR_MODEGUARD, (0x00 << 2) | (nxt6000_readreg(state, OFDM_COR_MODEGUARD) & ~0x04));
-
-	case TRANSMISSION_MODE_8K:
-	case TRANSMISSION_MODE_AUTO:
-		if ((result = nxt6000_writereg(state, EN_DMD_RACQ, 0x02 | (nxt6000_readreg(state, EN_DMD_RACQ) & ~0x03))) < 0)
-			return result;
-
-		return nxt6000_writereg(state, OFDM_COR_MODEGUARD, (0x01 << 2) | (nxt6000_readreg(state, OFDM_COR_MODEGUARD) & ~0x04));
-
-	default:
-		return -EINVAL;
-
-	}
-}
-
-static void nxt6000_setup(struct dvb_frontend* fe)
-{
-	struct nxt6000_state* state = fe->demodulator_priv;
-
-	nxt6000_writereg(state, RS_COR_SYNC_PARAM, SYNC_PARAM);
-	nxt6000_writereg(state, BER_CTRL, /*(1 << 2) | */ (0x01 << 1) | 0x01);
-	nxt6000_writereg(state, VIT_BERTIME_2, 0x00);  // BER Timer = 0x000200 * 256 = 131072 bits
-	nxt6000_writereg(state, VIT_BERTIME_1, 0x02);  //
-	nxt6000_writereg(state, VIT_BERTIME_0, 0x00);  //
-	nxt6000_writereg(state, VIT_COR_INTEN, 0x98); // Enable BER interrupts
-	nxt6000_writereg(state, VIT_COR_CTL, 0x82);   // Enable BER measurement
-	nxt6000_writereg(state, VIT_COR_CTL, VIT_COR_RESYNC | 0x02 );
-	nxt6000_writereg(state, OFDM_COR_CTL, (0x01 << 5) | (nxt6000_readreg(state, OFDM_COR_CTL) & 0x0F));
-	nxt6000_writereg(state, OFDM_COR_MODEGUARD, FORCEMODE8K | 0x02);
-	nxt6000_writereg(state, OFDM_AGC_CTL, AGCLAST | INITIAL_AGC_BW);
-	nxt6000_writereg(state, OFDM_ITB_FREQ_1, 0x06);
-	nxt6000_writereg(state, OFDM_ITB_FREQ_2, 0x31);
-	nxt6000_writereg(state, OFDM_CAS_CTL, (0x01 << 7) | (0x02 << 3) | 0x04);
-	nxt6000_writereg(state, CAS_FREQ, 0xBB);	/* CHECKME */
-	nxt6000_writereg(state, OFDM_SYR_CTL, 1 << 2);
-	nxt6000_writereg(state, OFDM_PPM_CTL_1, PPM256);
-	nxt6000_writereg(state, OFDM_TRL_NOMINALRATE_1, 0x49);
-	nxt6000_writereg(state, OFDM_TRL_NOMINALRATE_2, 0x72);
-	nxt6000_writereg(state, ANALOG_CONTROL_0, 1 << 5);
-	nxt6000_writereg(state, EN_DMD_RACQ, (1 << 7) | (3 << 4) | 2);
-	nxt6000_writereg(state, DIAG_CONFIG, TB_SET);
-
-	if (state->config->clock_inversion)
-		nxt6000_writereg(state, SUB_DIAG_MODE_SEL, CLKINVERSION);
-	else
-		nxt6000_writereg(state, SUB_DIAG_MODE_SEL, 0);
-
-	nxt6000_writereg(state, TS_FORMAT, 0);
-}
-
-static void nxt6000_dump_status(struct nxt6000_state *state)
-{
-	u8 val;
-
-/*
-	printk("RS_COR_STAT: 0x%02X\n", nxt6000_readreg(fe, RS_COR_STAT));
-	printk("VIT_SYNC_STATUS: 0x%02X\n", nxt6000_readreg(fe, VIT_SYNC_STATUS));
-	printk("OFDM_COR_STAT: 0x%02X\n", nxt6000_readreg(fe, OFDM_COR_STAT));
-	printk("OFDM_SYR_STAT: 0x%02X\n", nxt6000_readreg(fe, OFDM_SYR_STAT));
-	printk("OFDM_TPS_RCVD_1: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RCVD_1));
-	printk("OFDM_TPS_RCVD_2: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RCVD_2));
-	printk("OFDM_TPS_RCVD_3: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RCVD_3));
-	printk("OFDM_TPS_RCVD_4: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RCVD_4));
-	printk("OFDM_TPS_RESERVED_1: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RESERVED_1));
-	printk("OFDM_TPS_RESERVED_2: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RESERVED_2));
-*/
-	printk("NXT6000 status:");
-
-	val = nxt6000_readreg(state, RS_COR_STAT);
-
-	printk(" DATA DESCR LOCK: %d,", val & 0x01);
-	printk(" DATA SYNC LOCK: %d,", (val >> 1) & 0x01);
-
-	val = nxt6000_readreg(state, VIT_SYNC_STATUS);
-
-	printk(" VITERBI LOCK: %d,", (val >> 7) & 0x01);
-
-	switch ((val >> 4) & 0x07) {
-
-	case 0x00:
-		printk(" VITERBI CODERATE: 1/2,");
-		break;
-
-	case 0x01:
-		printk(" VITERBI CODERATE: 2/3,");
-		break;
-
-	case 0x02:
-		printk(" VITERBI CODERATE: 3/4,");
-		break;
-
-	case 0x03:
-		printk(" VITERBI CODERATE: 5/6,");
-		break;
-
-	case 0x04:
-		printk(" VITERBI CODERATE: 7/8,");
-		break;
-
-	default:
-		printk(" VITERBI CODERATE: Reserved,");
-
-	}
-
-	val = nxt6000_readreg(state, OFDM_COR_STAT);
-
-	printk(" CHCTrack: %d,", (val >> 7) & 0x01);
-	printk(" TPSLock: %d,", (val >> 6) & 0x01);
-	printk(" SYRLock: %d,", (val >> 5) & 0x01);
-	printk(" AGCLock: %d,", (val >> 4) & 0x01);
-
-	switch (val & 0x0F) {
-
-	case 0x00:
-		printk(" CoreState: IDLE,");
-		break;
-
-	case 0x02:
-		printk(" CoreState: WAIT_AGC,");
-		break;
-
-	case 0x03:
-		printk(" CoreState: WAIT_SYR,");
-		break;
-
-	case 0x04:
-		printk(" CoreState: WAIT_PPM,");
-		break;
-
-	case 0x01:
-		printk(" CoreState: WAIT_TRL,");
-		break;
-
-	case 0x05:
-		printk(" CoreState: WAIT_TPS,");
-		break;
-
-	case 0x06:
-		printk(" CoreState: MONITOR_TPS,");
-		break;
-
-	default:
-		printk(" CoreState: Reserved,");
-
-	}
-
-	val = nxt6000_readreg(state, OFDM_SYR_STAT);
-
-	printk(" SYRLock: %d,", (val >> 4) & 0x01);
-	printk(" SYRMode: %s,", (val >> 2) & 0x01 ? "8K" : "2K");
-
-	switch ((val >> 4) & 0x03) {
-
-	case 0x00:
-		printk(" SYRGuard: 1/32,");
-		break;
-
-	case 0x01:
-		printk(" SYRGuard: 1/16,");
-		break;
-
-	case 0x02:
-		printk(" SYRGuard: 1/8,");
-		break;
-
-	case 0x03:
-		printk(" SYRGuard: 1/4,");
-		break;
-	}
-
-	val = nxt6000_readreg(state, OFDM_TPS_RCVD_3);
-
-	switch ((val >> 4) & 0x07) {
-
-	case 0x00:
-		printk(" TPSLP: 1/2,");
-		break;
-
-	case 0x01:
-		printk(" TPSLP: 2/3,");
-		break;
-
-	case 0x02:
-		printk(" TPSLP: 3/4,");
-		break;
-
-	case 0x03:
-		printk(" TPSLP: 5/6,");
-		break;
-
-	case 0x04:
-		printk(" TPSLP: 7/8,");
-		break;
-
-	default:
-		printk(" TPSLP: Reserved,");
-
-	}
-
-	switch (val & 0x07) {
-
-	case 0x00:
-		printk(" TPSHP: 1/2,");
-		break;
-
-	case 0x01:
-		printk(" TPSHP: 2/3,");
-		break;
-
-	case 0x02:
-		printk(" TPSHP: 3/4,");
-		break;
-
-	case 0x03:
-		printk(" TPSHP: 5/6,");
-		break;
-
-	case 0x04:
-		printk(" TPSHP: 7/8,");
-		break;
-
-	default:
-		printk(" TPSHP: Reserved,");
-
-	}
-
-	val = nxt6000_readreg(state, OFDM_TPS_RCVD_4);
-
-	printk(" TPSMode: %s,", val & 0x01 ? "8K" : "2K");
-
-	switch ((val >> 4) & 0x03) {
-
-	case 0x00:
-		printk(" TPSGuard: 1/32,");
-		break;
-
-	case 0x01:
-		printk(" TPSGuard: 1/16,");
-		break;
-
-	case 0x02:
-		printk(" TPSGuard: 1/8,");
-		break;
-
-	case 0x03:
-		printk(" TPSGuard: 1/4,");
-		break;
-
-	}
-
-	/* Strange magic required to gain access to RF_AGC_STATUS */
-	nxt6000_readreg(state, RF_AGC_VAL_1);
-	val = nxt6000_readreg(state, RF_AGC_STATUS);
-	val = nxt6000_readreg(state, RF_AGC_STATUS);
-
-	printk(" RF AGC LOCK: %d,", (val >> 4) & 0x01);
-	printk("\n");
-}
-
-static int nxt6000_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	u8 core_status;
-	struct nxt6000_state* state = fe->demodulator_priv;
-
-	*status = 0;
-
-	core_status = nxt6000_readreg(state, OFDM_COR_STAT);
-
-	if (core_status & AGCLOCKED)
-		*status |= FE_HAS_SIGNAL;
-
-	if (nxt6000_readreg(state, OFDM_SYR_STAT) & GI14_SYR_LOCK)
-		*status |= FE_HAS_CARRIER;
-
-	if (nxt6000_readreg(state, VIT_SYNC_STATUS) & VITINSYNC)
-		*status |= FE_HAS_VITERBI;
-
-	if (nxt6000_readreg(state, RS_COR_STAT) & RSCORESTATUS)
-		*status |= FE_HAS_SYNC;
-
-	if ((core_status & TPSLOCKED) && (*status == (FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)))
-		*status |= FE_HAS_LOCK;
-
-	if (debug)
-		nxt6000_dump_status(state);
-
-	return 0;
-}
-
-static int nxt6000_init(struct dvb_frontend* fe)
-{
-	struct nxt6000_state* state = fe->demodulator_priv;
-
-	nxt6000_reset(state);
-	nxt6000_setup(fe);
-
-	return 0;
-}
-
-static int nxt6000_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct nxt6000_state* state = fe->demodulator_priv;
-	int result;
-
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	result = nxt6000_set_bandwidth(state, p->bandwidth_hz);
-	if (result < 0)
-		return result;
-
-	result = nxt6000_set_guard_interval(state, p->guard_interval);
-	if (result < 0)
-		return result;
-
-	result = nxt6000_set_transmission_mode(state, p->transmission_mode);
-	if (result < 0)
-		return result;
-
-	result = nxt6000_set_inversion(state, p->inversion);
-	if (result < 0)
-		return result;
-
-	msleep(500);
-	return 0;
-}
-
-static void nxt6000_release(struct dvb_frontend* fe)
-{
-	struct nxt6000_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static int nxt6000_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct nxt6000_state* state = fe->demodulator_priv;
-
-	*snr = nxt6000_readreg( state, OFDM_CHC_SNR) / 8;
-
-	return 0;
-}
-
-static int nxt6000_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct nxt6000_state* state = fe->demodulator_priv;
-
-	nxt6000_writereg( state, VIT_COR_INTSTAT, 0x18 );
-
-	*ber = (nxt6000_readreg( state, VIT_BER_1 ) << 8 ) |
-		nxt6000_readreg( state, VIT_BER_0 );
-
-	nxt6000_writereg( state, VIT_COR_INTSTAT, 0x18); // Clear BER Done interrupts
-
-	return 0;
-}
-
-static int nxt6000_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength)
-{
-	struct nxt6000_state* state = fe->demodulator_priv;
-
-	*signal_strength = (short) (511 -
-		(nxt6000_readreg(state, AGC_GAIN_1) +
-		((nxt6000_readreg(state, AGC_GAIN_2) & 0x03) << 8)));
-
-	return 0;
-}
-
-static int nxt6000_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
-{
-	tune->min_delay_ms = 500;
-	return 0;
-}
-
-static int nxt6000_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
-{
-	struct nxt6000_state* state = fe->demodulator_priv;
-
-	if (enable) {
-		return nxt6000_writereg(state, ENABLE_TUNER_IIC, 0x01);
-	} else {
-		return nxt6000_writereg(state, ENABLE_TUNER_IIC, 0x00);
-	}
-}
-
-static struct dvb_frontend_ops nxt6000_ops;
-
-struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config,
-				    struct i2c_adapter* i2c)
-{
-	struct nxt6000_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct nxt6000_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-
-	/* check if the demod is there */
-	if (nxt6000_readreg(state, OFDM_MSC_REV) != NXT6000ASICDEVICE) goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &nxt6000_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops nxt6000_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name = "NxtWave NXT6000 DVB-T",
-		.frequency_min = 0,
-		.frequency_max = 863250000,
-		.frequency_stepsize = 62500,
-		/*.frequency_tolerance = *//* FIXME: 12% of SR */
-		.symbol_rate_min = 0,	/* FIXME */
-		.symbol_rate_max = 9360000,	/* FIXME */
-		.symbol_rate_tolerance = 4000,
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
-			FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
-			FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
-			FE_CAN_HIERARCHY_AUTO,
-	},
-
-	.release = nxt6000_release,
-
-	.init = nxt6000_init,
-	.i2c_gate_ctrl = nxt6000_i2c_gate_ctrl,
-
-	.get_tune_settings = nxt6000_fe_get_tune_settings,
-
-	.set_frontend = nxt6000_set_frontend,
-
-	.read_status = nxt6000_read_status,
-	.read_ber = nxt6000_read_ber,
-	.read_signal_strength = nxt6000_read_signal_strength,
-	.read_snr = nxt6000_read_snr,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("NxtWave NXT6000 DVB-T demodulator driver");
-MODULE_AUTHOR("Florian Schirmer");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(nxt6000_attach);
diff --git a/drivers/media/dvb/frontends/nxt6000.h b/drivers/media/dvb/frontends/nxt6000.h
deleted file mode 100644
index 878eb38..0000000
--- a/drivers/media/dvb/frontends/nxt6000.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
-	NxtWave Communications - NXT6000 demodulator driver
-
-    Copyright (C) 2002-2003 Florian Schirmer <jolt@tuxbox.org>
-    Copyright (C) 2003 Paul Andreassen <paul@andreassen.com.au>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef NXT6000_H
-#define NXT6000_H
-
-#include <linux/dvb/frontend.h>
-
-struct nxt6000_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* should clock inversion be used? */
-	u8 clock_inversion:1;
-};
-
-#if defined(CONFIG_DVB_NXT6000) || (defined(CONFIG_DVB_NXT6000_MODULE) && defined(MODULE))
-extern struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config,
-					   struct i2c_adapter* i2c);
-#else
-static inline struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config,
-					   struct i2c_adapter* i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_NXT6000
-
-#endif // NXT6000_H
diff --git a/drivers/media/dvb/frontends/nxt6000_priv.h b/drivers/media/dvb/frontends/nxt6000_priv.h
deleted file mode 100644
index 0422e58..0000000
--- a/drivers/media/dvb/frontends/nxt6000_priv.h
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- * Public Include File for DRV6000 users
- * (ie. NxtWave Communications - NXT6000 demodulator driver)
- *
- * Copyright (C) 2001 NxtWave Communications, Inc.
- *
- */
-
-/*  Nxt6000 Register Addresses and Bit Masks */
-
-/* Maximum Register Number */
-#define MAXNXT6000REG          (0x9A)
-
-/* 0x1B A_VIT_BER_0  aka 0x3A */
-#define A_VIT_BER_0            (0x1B)
-
-/* 0x1D A_VIT_BER_TIMER_0 aka 0x38 */
-#define A_VIT_BER_TIMER_0      (0x1D)
-
-/* 0x21 RS_COR_STAT */
-#define RS_COR_STAT            (0x21)
-#define RSCORESTATUS           (0x03)
-
-/* 0x22 RS_COR_INTEN */
-#define RS_COR_INTEN           (0x22)
-
-/* 0x23 RS_COR_INSTAT */
-#define RS_COR_INSTAT          (0x23)
-#define INSTAT_ERROR           (0x04)
-#define LOCK_LOSS_BITS         (0x03)
-
-/* 0x24 RS_COR_SYNC_PARAM */
-#define RS_COR_SYNC_PARAM      (0x24)
-#define SYNC_PARAM             (0x03)
-
-/* 0x25 BER_CTRL */
-#define BER_CTRL               (0x25)
-#define BER_ENABLE             (0x02)
-#define BER_RESET              (0x01)
-
-/* 0x26 BER_PAY */
-#define BER_PAY                (0x26)
-
-/* 0x27 BER_PKT_L */
-#define BER_PKT_L              (0x27)
-#define BER_PKTOVERFLOW        (0x80)
-
-/* 0x30 VIT_COR_CTL */
-#define VIT_COR_CTL            (0x30)
-#define BER_CONTROL            (0x02)
-#define VIT_COR_MASK           (0x82)
-#define VIT_COR_RESYNC         (0x80)
-
-
-/* 0x32 VIT_SYNC_STATUS */
-#define VIT_SYNC_STATUS        (0x32)
-#define VITINSYNC              (0x80)
-
-/* 0x33 VIT_COR_INTEN */
-#define VIT_COR_INTEN          (0x33)
-#define GLOBAL_ENABLE          (0x80)
-
-/* 0x34 VIT_COR_INTSTAT */
-#define VIT_COR_INTSTAT        (0x34)
-#define BER_DONE               (0x08)
-#define BER_OVERFLOW           (0x10)
-
-/* 0x38 VIT_BERTIME_2 */
-#define VIT_BERTIME_2      (0x38)
-
-/* 0x39 VIT_BERTIME_1 */
-#define VIT_BERTIME_1      (0x39)
-
-/* 0x3A VIT_BERTIME_0 */
-#define VIT_BERTIME_0      (0x3a)
-
-			     /* 0x38 OFDM_BERTimer *//* Use the alias registers */
-#define A_VIT_BER_TIMER_0      (0x1D)
-
-			     /* 0x3A VIT_BER_TIMER_0 *//* Use the alias registers */
-#define A_VIT_BER_0            (0x1B)
-
-/* 0x3B VIT_BER_1 */
-#define VIT_BER_1              (0x3b)
-
-/* 0x3C VIT_BER_0 */
-#define VIT_BER_0              (0x3c)
-
-/* 0x40 OFDM_COR_CTL */
-#define OFDM_COR_CTL           (0x40)
-#define COREACT                (0x20)
-#define HOLDSM                 (0x10)
-#define WAIT_AGC               (0x02)
-#define WAIT_SYR               (0x03)
-
-/* 0x41 OFDM_COR_STAT */
-#define OFDM_COR_STAT          (0x41)
-#define COR_STATUS             (0x0F)
-#define MONITOR_TPS            (0x06)
-#define TPSLOCKED              (0x40)
-#define AGCLOCKED              (0x10)
-
-/* 0x42 OFDM_COR_INTEN */
-#define OFDM_COR_INTEN         (0x42)
-#define TPSRCVBAD              (0x04)
-#define TPSRCVCHANGED         (0x02)
-#define TPSRCVUPDATE           (0x01)
-
-/* 0x43 OFDM_COR_INSTAT */
-#define OFDM_COR_INSTAT        (0x43)
-
-/* 0x44 OFDM_COR_MODEGUARD */
-#define OFDM_COR_MODEGUARD     (0x44)
-#define FORCEMODE              (0x08)
-#define FORCEMODE8K			   (0x04)
-
-/* 0x45 OFDM_AGC_CTL */
-#define OFDM_AGC_CTL           (0x45)
-#define INITIAL_AGC_BW		   (0x08)
-#define AGCNEG                 (0x02)
-#define AGCLAST				   (0x10)
-
-/* 0x48 OFDM_AGC_TARGET */
-#define OFDM_AGC_TARGET		   (0x48)
-#define OFDM_AGC_TARGET_DEFAULT (0x28)
-#define OFDM_AGC_TARGET_IMPULSE (0x38)
-
-/* 0x49 OFDM_AGC_GAIN_1 */
-#define OFDM_AGC_GAIN_1        (0x49)
-
-/* 0x4B OFDM_ITB_CTL */
-#define OFDM_ITB_CTL           (0x4B)
-#define ITBINV                 (0x01)
-
-/* 0x49 AGC_GAIN_1 */
-#define AGC_GAIN_1             (0x49)
-
-/* 0x4A AGC_GAIN_2 */
-#define AGC_GAIN_2             (0x4A)
-
-/* 0x4C OFDM_ITB_FREQ_1 */
-#define OFDM_ITB_FREQ_1        (0x4C)
-
-/* 0x4D OFDM_ITB_FREQ_2 */
-#define OFDM_ITB_FREQ_2        (0x4D)
-
-/* 0x4E  OFDM_CAS_CTL */
-#define OFDM_CAS_CTL           (0x4E)
-#define ACSDIS                 (0x40)
-#define CCSEN                  (0x80)
-
-/* 0x4F CAS_FREQ */
-#define CAS_FREQ               (0x4F)
-
-/* 0x51 OFDM_SYR_CTL */
-#define OFDM_SYR_CTL           (0x51)
-#define SIXTH_ENABLE           (0x80)
-#define SYR_TRACKING_DISABLE   (0x01)
-
-/* 0x52 OFDM_SYR_STAT */
-#define OFDM_SYR_STAT		   (0x52)
-#define GI14_2K_SYR_LOCK	   (0x13)
-#define GI14_8K_SYR_LOCK	   (0x17)
-#define GI14_SYR_LOCK		   (0x10)
-
-/* 0x55 OFDM_SYR_OFFSET_1 */
-#define OFDM_SYR_OFFSET_1      (0x55)
-
-/* 0x56 OFDM_SYR_OFFSET_2 */
-#define OFDM_SYR_OFFSET_2      (0x56)
-
-/* 0x58 OFDM_SCR_CTL */
-#define OFDM_SCR_CTL           (0x58)
-#define SYR_ADJ_DECAY_MASK     (0x70)
-#define SYR_ADJ_DECAY          (0x30)
-
-/* 0x59 OFDM_PPM_CTL_1 */
-#define OFDM_PPM_CTL_1         (0x59)
-#define PPMMAX_MASK            (0x30)
-#define PPM256				   (0x30)
-
-/* 0x5B OFDM_TRL_NOMINALRATE_1 */
-#define OFDM_TRL_NOMINALRATE_1 (0x5B)
-
-/* 0x5C OFDM_TRL_NOMINALRATE_2 */
-#define OFDM_TRL_NOMINALRATE_2 (0x5C)
-
-/* 0x5D OFDM_TRL_TIME_1 */
-#define OFDM_TRL_TIME_1        (0x5D)
-
-/* 0x60 OFDM_CRL_FREQ_1 */
-#define OFDM_CRL_FREQ_1        (0x60)
-
-/* 0x63 OFDM_CHC_CTL_1 */
-#define OFDM_CHC_CTL_1         (0x63)
-#define MANMEAN1               (0xF0);
-#define CHCFIR                 (0x01)
-
-/* 0x64 OFDM_CHC_SNR */
-#define OFDM_CHC_SNR           (0x64)
-
-/* 0x65 OFDM_BDI_CTL */
-#define OFDM_BDI_CTL           (0x65)
-#define LP_SELECT              (0x02)
-
-/* 0x67 OFDM_TPS_RCVD_1 */
-#define OFDM_TPS_RCVD_1        (0x67)
-#define TPSFRAME               (0x03)
-
-/* 0x68 OFDM_TPS_RCVD_2 */
-#define OFDM_TPS_RCVD_2        (0x68)
-
-/* 0x69 OFDM_TPS_RCVD_3 */
-#define OFDM_TPS_RCVD_3        (0x69)
-
-/* 0x6A OFDM_TPS_RCVD_4 */
-#define OFDM_TPS_RCVD_4        (0x6A)
-
-/* 0x6B OFDM_TPS_RESERVED_1 */
-#define OFDM_TPS_RESERVED_1    (0x6B)
-
-/* 0x6C OFDM_TPS_RESERVED_2 */
-#define OFDM_TPS_RESERVED_2    (0x6C)
-
-/* 0x73 OFDM_MSC_REV */
-#define OFDM_MSC_REV           (0x73)
-
-/* 0x76 OFDM_SNR_CARRIER_2 */
-#define OFDM_SNR_CARRIER_2     (0x76)
-#define MEAN_MASK              (0x80)
-#define MEANBIT                (0x80)
-
-/* 0x80 ANALOG_CONTROL_0 */
-#define ANALOG_CONTROL_0       (0x80)
-#define POWER_DOWN_ADC         (0x40)
-
-/* 0x81 ENABLE_TUNER_IIC */
-#define ENABLE_TUNER_IIC       (0x81)
-#define ENABLE_TUNER_BIT       (0x01)
-
-/* 0x82 EN_DMD_RACQ */
-#define EN_DMD_RACQ            (0x82)
-#define EN_DMD_RACQ_REG_VAL    (0x81)
-#define EN_DMD_RACQ_REG_VAL_14 (0x01)
-
-/* 0x84 SNR_COMMAND */
-#define SNR_COMMAND            (0x84)
-#define SNRStat                (0x80)
-
-/* 0x85 SNRCARRIERNUMBER_LSB */
-#define SNRCARRIERNUMBER_LSB   (0x85)
-
-/* 0x87 SNRMINTHRESHOLD_LSB */
-#define SNRMINTHRESHOLD_LSB    (0x87)
-
-/* 0x89 SNR_PER_CARRIER_LSB */
-#define SNR_PER_CARRIER_LSB    (0x89)
-
-/* 0x8B SNRBELOWTHRESHOLD_LSB */
-#define SNRBELOWTHRESHOLD_LSB  (0x8B)
-
-/* 0x91 RF_AGC_VAL_1 */
-#define RF_AGC_VAL_1           (0x91)
-
-/* 0x92 RF_AGC_STATUS */
-#define RF_AGC_STATUS          (0x92)
-
-/* 0x98 DIAG_CONFIG */
-#define DIAG_CONFIG            (0x98)
-#define DIAG_MASK              (0x70)
-#define TB_SET                 (0x10)
-#define TRAN_SELECT            (0x07)
-#define SERIAL_SELECT          (0x01)
-
-/* 0x99 SUB_DIAG_MODE_SEL */
-#define SUB_DIAG_MODE_SEL      (0x99)
-#define CLKINVERSION           (0x01)
-
-/* 0x9A TS_FORMAT */
-#define TS_FORMAT              (0x9A)
-#define ERROR_SENSE            (0x08)
-#define VALID_SENSE            (0x04)
-#define SYNC_SENSE             (0x02)
-#define GATED_CLOCK            (0x01)
-
-#define NXT6000ASICDEVICE      (0x0b)
diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c
deleted file mode 100644
index 5ef9218..0000000
--- a/drivers/media/dvb/frontends/or51132.c
+++ /dev/null
@@ -1,631 +0,0 @@
-/*
- *    Support for OR51132 (pcHDTV HD-3000) - VSB/QAM
- *
- *
- *    Copyright (C) 2007 Trent Piepho <xyzzy@speakeasy.org>
- *
- *    Copyright (C) 2005 Kirk Lapray <kirk_lapray@bigfoot.com>
- *
- *    Based on code from Jack Kelliher (kelliher@xmission.com)
- *                           Copyright (C) 2002 & pcHDTV, inc.
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
-*/
-
-/*
- * This driver needs two external firmware files. Please copy
- * "dvb-fe-or51132-vsb.fw" and "dvb-fe-or51132-qam.fw" to
- * /usr/lib/hotplug/firmware/ or /lib/firmware/
- * (depending on configuration of firmware hotplug).
- */
-#define OR51132_VSB_FIRMWARE "dvb-fe-or51132-vsb.fw"
-#define OR51132_QAM_FIRMWARE "dvb-fe-or51132-qam.fw"
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <asm/byteorder.h>
-
-#include "dvb_math.h"
-#include "dvb_frontend.h"
-#include "or51132.h"
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "or51132: " args); \
-	} while (0)
-
-
-struct or51132_state
-{
-	struct i2c_adapter* i2c;
-
-	/* Configuration settings */
-	const struct or51132_config* config;
-
-	struct dvb_frontend frontend;
-
-	/* Demodulator private data */
-	fe_modulation_t current_modulation;
-	u32 snr; /* Result of last SNR calculation */
-
-	/* Tuner private data */
-	u32 current_frequency;
-};
-
-
-/* Write buffer to demod */
-static int or51132_writebuf(struct or51132_state *state, const u8 *buf, int len)
-{
-	int err;
-	struct i2c_msg msg = { .addr = state->config->demod_address,
-			       .flags = 0, .buf = (u8*)buf, .len = len };
-
-	/* msleep(20); */ /* doesn't appear to be necessary */
-	if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
-		printk(KERN_WARNING "or51132: I2C write (addr 0x%02x len %d) error: %d\n",
-		       msg.addr, msg.len, err);
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-
-/* Write constant bytes, e.g. or51132_writebytes(state, 0x04, 0x42, 0x00);
-   Less code and more efficient that loading a buffer on the stack with
-   the bytes to send and then calling or51132_writebuf() on that. */
-#define or51132_writebytes(state, data...)  \
-	({ static const u8 _data[] = {data}; \
-	or51132_writebuf(state, _data, sizeof(_data)); })
-
-/* Read data from demod into buffer.  Returns 0 on success. */
-static int or51132_readbuf(struct or51132_state *state, u8 *buf, int len)
-{
-	int err;
-	struct i2c_msg msg = { .addr = state->config->demod_address,
-			       .flags = I2C_M_RD, .buf = buf, .len = len };
-
-	/* msleep(20); */ /* doesn't appear to be necessary */
-	if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
-		printk(KERN_WARNING "or51132: I2C read (addr 0x%02x len %d) error: %d\n",
-		       msg.addr, msg.len, err);
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-
-/* Reads a 16-bit demod register.  Returns <0 on error. */
-static int or51132_readreg(struct or51132_state *state, u8 reg)
-{
-	u8 buf[2] = { 0x04, reg };
-	struct i2c_msg msg[2] = {
-		{.addr = state->config->demod_address, .flags = 0,
-		 .buf = buf, .len = 2 },
-		{.addr = state->config->demod_address, .flags = I2C_M_RD,
-		 .buf = buf, .len = 2 }};
-	int err;
-
-	if ((err = i2c_transfer(state->i2c, msg, 2)) != 2) {
-		printk(KERN_WARNING "or51132: I2C error reading register %d: %d\n",
-		       reg, err);
-		return -EREMOTEIO;
-	}
-	return buf[0] | (buf[1] << 8);
-}
-
-static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
-{
-	struct or51132_state* state = fe->demodulator_priv;
-	static const u8 run_buf[] = {0x7F,0x01};
-	u8 rec_buf[8];
-	u32 firmwareAsize, firmwareBsize;
-	int i,ret;
-
-	dprintk("Firmware is %Zd bytes\n",fw->size);
-
-	/* Get size of firmware A and B */
-	firmwareAsize = le32_to_cpu(*((__le32*)fw->data));
-	dprintk("FirmwareA is %i bytes\n",firmwareAsize);
-	firmwareBsize = le32_to_cpu(*((__le32*)(fw->data+4)));
-	dprintk("FirmwareB is %i bytes\n",firmwareBsize);
-
-	/* Upload firmware */
-	if ((ret = or51132_writebuf(state, &fw->data[8], firmwareAsize))) {
-		printk(KERN_WARNING "or51132: load_firmware error 1\n");
-		return ret;
-	}
-	if ((ret = or51132_writebuf(state, &fw->data[8+firmwareAsize],
-				    firmwareBsize))) {
-		printk(KERN_WARNING "or51132: load_firmware error 2\n");
-		return ret;
-	}
-
-	if ((ret = or51132_writebuf(state, run_buf, 2))) {
-		printk(KERN_WARNING "or51132: load_firmware error 3\n");
-		return ret;
-	}
-	if ((ret = or51132_writebuf(state, run_buf, 2))) {
-		printk(KERN_WARNING "or51132: load_firmware error 4\n");
-		return ret;
-	}
-
-	/* 50ms for operation to begin */
-	msleep(50);
-
-	/* Read back ucode version to besure we loaded correctly and are really up and running */
-	/* Get uCode version */
-	if ((ret = or51132_writebytes(state, 0x10, 0x10, 0x00))) {
-		printk(KERN_WARNING "or51132: load_firmware error a\n");
-		return ret;
-	}
-	if ((ret = or51132_writebytes(state, 0x04, 0x17))) {
-		printk(KERN_WARNING "or51132: load_firmware error b\n");
-		return ret;
-	}
-	if ((ret = or51132_writebytes(state, 0x00, 0x00))) {
-		printk(KERN_WARNING "or51132: load_firmware error c\n");
-		return ret;
-	}
-	for (i=0;i<4;i++) {
-		/* Once upon a time, this command might have had something
-		   to do with getting the firmware version, but it's
-		   not used anymore:
-		   {0x04,0x00,0x30,0x00,i+1} */
-		/* Read 8 bytes, two bytes at a time */
-		if ((ret = or51132_readbuf(state, &rec_buf[i*2], 2))) {
-			printk(KERN_WARNING
-			       "or51132: load_firmware error d - %d\n",i);
-			return ret;
-		}
-	}
-
-	printk(KERN_WARNING
-	       "or51132: Version: %02X%02X%02X%02X-%02X%02X%02X%02X (%02X%01X-%01X-%02X%01X-%01X)\n",
-	       rec_buf[1],rec_buf[0],rec_buf[3],rec_buf[2],
-	       rec_buf[5],rec_buf[4],rec_buf[7],rec_buf[6],
-	       rec_buf[3],rec_buf[2]>>4,rec_buf[2]&0x0f,
-	       rec_buf[5],rec_buf[4]>>4,rec_buf[4]&0x0f);
-
-	if ((ret = or51132_writebytes(state, 0x10, 0x00, 0x00))) {
-		printk(KERN_WARNING "or51132: load_firmware error e\n");
-		return ret;
-	}
-	return 0;
-};
-
-static int or51132_init(struct dvb_frontend* fe)
-{
-	return 0;
-}
-
-static int or51132_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	*ber = 0;
-	return 0;
-}
-
-static int or51132_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	*ucblocks = 0;
-	return 0;
-}
-
-static int or51132_sleep(struct dvb_frontend* fe)
-{
-	return 0;
-}
-
-static int or51132_setmode(struct dvb_frontend* fe)
-{
-	struct or51132_state* state = fe->demodulator_priv;
-	u8 cmd_buf1[3] = {0x04, 0x01, 0x5f};
-	u8 cmd_buf2[3] = {0x1c, 0x00, 0 };
-
-	dprintk("setmode %d\n",(int)state->current_modulation);
-
-	switch (state->current_modulation) {
-	case VSB_8:
-		/* Auto CH, Auto NTSC rej, MPEGser, MPEG2tr, phase noise-high */
-		cmd_buf1[2] = 0x50;
-		/* REC MODE inv IF spectrum, Normal */
-		cmd_buf2[1] = 0x03;
-		/* Channel MODE ATSC/VSB8 */
-		cmd_buf2[2] = 0x06;
-		break;
-	/* All QAM modes are:
-	   Auto-deinterleave; MPEGser, MPEG2tr, phase noise-high
-	   REC MODE Normal Carrier Lock */
-	case QAM_AUTO:
-		/* Channel MODE Auto QAM64/256 */
-		cmd_buf2[2] = 0x4f;
-		break;
-	case QAM_256:
-		/* Channel MODE QAM256 */
-		cmd_buf2[2] = 0x45;
-		break;
-	case QAM_64:
-		/* Channel MODE QAM64 */
-		cmd_buf2[2] = 0x43;
-		break;
-	default:
-		printk(KERN_WARNING
-		       "or51132: setmode: Modulation set to unsupported value (%d)\n",
-		       state->current_modulation);
-		return -EINVAL;
-	}
-
-	/* Set Receiver 1 register */
-	if (or51132_writebuf(state, cmd_buf1, 3)) {
-		printk(KERN_WARNING "or51132: set_mode error 1\n");
-		return -EREMOTEIO;
-	}
-	dprintk("set #1 to %02x\n", cmd_buf1[2]);
-
-	/* Set operation mode in Receiver 6 register */
-	if (or51132_writebuf(state, cmd_buf2, 3)) {
-		printk(KERN_WARNING "or51132: set_mode error 2\n");
-		return -EREMOTEIO;
-	}
-	dprintk("set #6 to 0x%02x%02x\n", cmd_buf2[1], cmd_buf2[2]);
-
-	return 0;
-}
-
-/* Some modulations use the same firmware.  This classifies modulations
-   by the firmware they use. */
-#define MOD_FWCLASS_UNKNOWN	0
-#define MOD_FWCLASS_VSB		1
-#define MOD_FWCLASS_QAM		2
-static int modulation_fw_class(fe_modulation_t modulation)
-{
-	switch(modulation) {
-	case VSB_8:
-		return MOD_FWCLASS_VSB;
-	case QAM_AUTO:
-	case QAM_64:
-	case QAM_256:
-		return MOD_FWCLASS_QAM;
-	default:
-		return MOD_FWCLASS_UNKNOWN;
-	}
-}
-
-static int or51132_set_parameters(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	int ret;
-	struct or51132_state* state = fe->demodulator_priv;
-	const struct firmware *fw;
-	const char *fwname;
-	int clock_mode;
-
-	/* Upload new firmware only if we need a different one */
-	if (modulation_fw_class(state->current_modulation) !=
-	    modulation_fw_class(p->modulation)) {
-		switch (modulation_fw_class(p->modulation)) {
-		case MOD_FWCLASS_VSB:
-			dprintk("set_parameters VSB MODE\n");
-			fwname = OR51132_VSB_FIRMWARE;
-
-			/* Set non-punctured clock for VSB */
-			clock_mode = 0;
-			break;
-		case MOD_FWCLASS_QAM:
-			dprintk("set_parameters QAM MODE\n");
-			fwname = OR51132_QAM_FIRMWARE;
-
-			/* Set punctured clock for QAM */
-			clock_mode = 1;
-			break;
-		default:
-			printk("or51132: Modulation type(%d) UNSUPPORTED\n",
-			       p->modulation);
-			return -1;
-		}
-		printk("or51132: Waiting for firmware upload(%s)...\n",
-		       fwname);
-		ret = request_firmware(&fw, fwname, state->i2c->dev.parent);
-		if (ret) {
-			printk(KERN_WARNING "or51132: No firmware up"
-			       "loaded(timeout or file not found?)\n");
-			return ret;
-		}
-		ret = or51132_load_firmware(fe, fw);
-		release_firmware(fw);
-		if (ret) {
-			printk(KERN_WARNING "or51132: Writing firmware to "
-			       "device failed!\n");
-			return ret;
-		}
-		printk("or51132: Firmware upload complete.\n");
-		state->config->set_ts_params(fe, clock_mode);
-	}
-	/* Change only if we are actually changing the modulation */
-	if (state->current_modulation != p->modulation) {
-		state->current_modulation = p->modulation;
-		or51132_setmode(fe);
-	}
-
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	/* Set to current mode */
-	or51132_setmode(fe);
-
-	/* Update current frequency */
-	state->current_frequency = p->frequency;
-	return 0;
-}
-
-static int or51132_get_parameters(struct dvb_frontend* fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct or51132_state* state = fe->demodulator_priv;
-	int status;
-	int retry = 1;
-
-start:
-	/* Receiver Status */
-	if ((status = or51132_readreg(state, 0x00)) < 0) {
-		printk(KERN_WARNING "or51132: get_parameters: error reading receiver status\n");
-		return -EREMOTEIO;
-	}
-	switch(status&0xff) {
-	case 0x06:
-		p->modulation = VSB_8;
-		break;
-	case 0x43:
-		p->modulation = QAM_64;
-		break;
-	case 0x45:
-		p->modulation = QAM_256;
-		break;
-	default:
-		if (retry--)
-			goto start;
-		printk(KERN_WARNING "or51132: unknown status 0x%02x\n",
-		       status&0xff);
-		return -EREMOTEIO;
-	}
-
-	/* FIXME: Read frequency from frontend, take AFC into account */
-	p->frequency = state->current_frequency;
-
-	/* FIXME: How to read inversion setting? Receiver 6 register? */
-	p->inversion = INVERSION_AUTO;
-
-	return 0;
-}
-
-static int or51132_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct or51132_state* state = fe->demodulator_priv;
-	int reg;
-
-	/* Receiver Status */
-	if ((reg = or51132_readreg(state, 0x00)) < 0) {
-		printk(KERN_WARNING "or51132: read_status: error reading receiver status: %d\n", reg);
-		*status = 0;
-		return -EREMOTEIO;
-	}
-	dprintk("%s: read_status %04x\n", __func__, reg);
-
-	if (reg & 0x0100) /* Receiver Lock */
-		*status = FE_HAS_SIGNAL|FE_HAS_CARRIER|FE_HAS_VITERBI|
-			  FE_HAS_SYNC|FE_HAS_LOCK;
-	else
-		*status = 0;
-	return 0;
-}
-
-/* Calculate SNR estimation (scaled by 2^24)
-
-   8-VSB SNR and QAM equations from Oren datasheets
-
-   For 8-VSB:
-     SNR[dB] = 10 * log10(897152044.8282 / MSE^2 ) - K
-
-     Where K = 0 if NTSC rejection filter is OFF; and
-	   K = 3 if NTSC rejection filter is ON
-
-   For QAM64:
-     SNR[dB] = 10 * log10(897152044.8282 / MSE^2 )
-
-   For QAM256:
-     SNR[dB] = 10 * log10(907832426.314266  / MSE^2 )
-
-   We re-write the snr equation as:
-     SNR * 2^24 = 10*(c - 2*intlog10(MSE))
-   Where for QAM256, c = log10(907832426.314266) * 2^24
-   and for 8-VSB and QAM64, c = log10(897152044.8282) * 2^24 */
-
-static u32 calculate_snr(u32 mse, u32 c)
-{
-	if (mse == 0) /* No signal */
-		return 0;
-
-	mse = 2*intlog10(mse);
-	if (mse > c) {
-		/* Negative SNR, which is possible, but realisticly the
-		demod will lose lock before the signal gets this bad.  The
-		API only allows for unsigned values, so just return 0 */
-		return 0;
-	}
-	return 10*(c - mse);
-}
-
-static int or51132_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct or51132_state* state = fe->demodulator_priv;
-	int noise, reg;
-	u32 c, usK = 0;
-	int retry = 1;
-
-start:
-	/* SNR after Equalizer */
-	noise = or51132_readreg(state, 0x02);
-	if (noise < 0) {
-		printk(KERN_WARNING "or51132: read_snr: error reading equalizer\n");
-		return -EREMOTEIO;
-	}
-	dprintk("read_snr noise (%d)\n", noise);
-
-	/* Read status, contains modulation type for QAM_AUTO and
-	   NTSC filter for VSB */
-	reg = or51132_readreg(state, 0x00);
-	if (reg < 0) {
-		printk(KERN_WARNING "or51132: read_snr: error reading receiver status\n");
-		return -EREMOTEIO;
-	}
-
-	switch (reg&0xff) {
-	case 0x06:
-		if (reg & 0x1000) usK = 3 << 24;
-		/* Fall through to QAM64 case */
-	case 0x43:
-		c = 150204167;
-		break;
-	case 0x45:
-		c = 150290396;
-		break;
-	default:
-		printk(KERN_WARNING "or51132: unknown status 0x%02x\n", reg&0xff);
-		if (retry--) goto start;
-		return -EREMOTEIO;
-	}
-	dprintk("%s: modulation %02x, NTSC rej O%s\n", __func__,
-		reg&0xff, reg&0x1000?"n":"ff");
-
-	/* Calculate SNR using noise, c, and NTSC rejection correction */
-	state->snr = calculate_snr(noise, c) - usK;
-	*snr = (state->snr) >> 16;
-
-	dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __func__, noise,
-		state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16);
-
-	return 0;
-}
-
-static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	/* Calculate Strength from SNR up to 35dB */
-	/* Even though the SNR can go higher than 35dB, there is some comfort */
-	/* factor in having a range of strong signals that can show at 100%   */
-	struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
-	u16 snr;
-	int ret;
-
-	ret = fe->ops.read_snr(fe, &snr);
-	if (ret != 0)
-		return ret;
-	/* Rather than use the 8.8 value snr, use state->snr which is 8.24 */
-	/* scale the range 0 - 35*2^24 into 0 - 65535 */
-	if (state->snr >= 8960 * 0x10000)
-		*strength = 0xffff;
-	else
-		*strength = state->snr / 8960;
-
-	return 0;
-}
-
-static int or51132_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings)
-{
-	fe_tune_settings->min_delay_ms = 500;
-	fe_tune_settings->step_size = 0;
-	fe_tune_settings->max_drift = 0;
-
-	return 0;
-}
-
-static void or51132_release(struct dvb_frontend* fe)
-{
-	struct or51132_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops or51132_ops;
-
-struct dvb_frontend* or51132_attach(const struct or51132_config* config,
-				    struct i2c_adapter* i2c)
-{
-	struct or51132_state* state = NULL;
-
-	/* Allocate memory for the internal state */
-	state = kzalloc(sizeof(struct or51132_state), GFP_KERNEL);
-	if (state == NULL)
-		return NULL;
-
-	/* Setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->current_frequency = -1;
-	state->current_modulation = -1;
-
-	/* Create dvb_frontend */
-	memcpy(&state->frontend.ops, &or51132_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-}
-
-static struct dvb_frontend_ops or51132_ops = {
-	.delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
-	.info = {
-		.name			= "Oren OR51132 VSB/QAM Frontend",
-		.frequency_min		= 44000000,
-		.frequency_max		= 958000000,
-		.frequency_stepsize	= 166666,
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_QAM_AUTO |
-			FE_CAN_8VSB
-	},
-
-	.release = or51132_release,
-
-	.init = or51132_init,
-	.sleep = or51132_sleep,
-
-	.set_frontend = or51132_set_parameters,
-	.get_frontend = or51132_get_parameters,
-	.get_tune_settings = or51132_get_tune_settings,
-
-	.read_status = or51132_read_status,
-	.read_ber = or51132_read_ber,
-	.read_signal_strength = or51132_read_signal_strength,
-	.read_snr = or51132_read_snr,
-	.read_ucblocks = or51132_read_ucblocks,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("OR51132 ATSC [pcHDTV HD-3000] (8VSB & ITU J83 AnnexB FEC QAM64/256) Demodulator Driver");
-MODULE_AUTHOR("Kirk Lapray");
-MODULE_AUTHOR("Trent Piepho");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(or51132_attach);
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/frontends/or51132.h b/drivers/media/dvb/frontends/or51132.h
deleted file mode 100644
index 1b8e04d..0000000
--- a/drivers/media/dvb/frontends/or51132.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- *    Support for OR51132 (pcHDTV HD-3000) - VSB/QAM
- *
- *    Copyright (C) 2005 Kirk Lapray <kirk_lapray@bigfoot.com>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
-*/
-
-#ifndef OR51132_H
-#define OR51132_H
-
-#include <linux/firmware.h>
-#include <linux/dvb/frontend.h>
-
-struct or51132_config
-{
-	/* The demodulator's i2c address */
-	u8 demod_address;
-
-	/* Need to set device param for start_dma */
-	int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
-};
-
-#if defined(CONFIG_DVB_OR51132) || (defined(CONFIG_DVB_OR51132_MODULE) && defined(MODULE))
-extern struct dvb_frontend* or51132_attach(const struct or51132_config* config,
-					   struct i2c_adapter* i2c);
-#else
-static inline struct dvb_frontend* or51132_attach(const struct or51132_config* config,
-					   struct i2c_adapter* i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_OR51132
-
-#endif // OR51132_H
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/frontends/or51211.c b/drivers/media/dvb/frontends/or51211.c
deleted file mode 100644
index c625b57..0000000
--- a/drivers/media/dvb/frontends/or51211.c
+++ /dev/null
@@ -1,581 +0,0 @@
-/*
- *    Support for OR51211 (pcHDTV HD-2000) - VSB
- *
- *    Copyright (C) 2005 Kirk Lapray <kirk_lapray@bigfoot.com>
- *
- *    Based on code from Jack Kelliher (kelliher@xmission.com)
- *                           Copyright (C) 2002 & pcHDTV, inc.
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
-*/
-
-/*
- * This driver needs external firmware. Please use the command
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware or51211" to
- * download/extract it, and then copy it to /usr/lib/hotplug/firmware
- * or /lib/firmware (depending on configuration of firmware hotplug).
- */
-#define OR51211_DEFAULT_FIRMWARE "dvb-fe-or51211.fw"
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <asm/byteorder.h>
-
-#include "dvb_math.h"
-#include "dvb_frontend.h"
-#include "or51211.h"
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "or51211: " args); \
-	} while (0)
-
-static u8 run_buf[] = {0x7f,0x01};
-static u8 cmd_buf[] = {0x04,0x01,0x50,0x80,0x06}; // ATSC
-
-struct or51211_state {
-
-	struct i2c_adapter* i2c;
-
-	/* Configuration settings */
-	const struct or51211_config* config;
-
-	struct dvb_frontend frontend;
-	struct bt878* bt;
-
-	/* Demodulator private data */
-	u8 initialized:1;
-	u32 snr; /* Result of last SNR claculation */
-
-	/* Tuner private data */
-	u32 current_frequency;
-};
-
-static int i2c_writebytes (struct or51211_state* state, u8 reg, const u8 *buf,
-			   int len)
-{
-	int err;
-	struct i2c_msg msg;
-	msg.addr	= reg;
-	msg.flags	= 0;
-	msg.len		= len;
-	msg.buf		= (u8 *)buf;
-
-	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-		printk(KERN_WARNING "or51211: i2c_writebytes error "
-		       "(addr %02x, err == %i)\n", reg, err);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int i2c_readbytes(struct or51211_state *state, u8 reg, u8 *buf, int len)
-{
-	int err;
-	struct i2c_msg msg;
-	msg.addr	= reg;
-	msg.flags	= I2C_M_RD;
-	msg.len		= len;
-	msg.buf		= buf;
-
-	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-		printk(KERN_WARNING "or51211: i2c_readbytes error "
-		       "(addr %02x, err == %i)\n", reg, err);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int or51211_load_firmware (struct dvb_frontend* fe,
-				  const struct firmware *fw)
-{
-	struct or51211_state* state = fe->demodulator_priv;
-	u8 tudata[585];
-	int i;
-
-	dprintk("Firmware is %zd bytes\n",fw->size);
-
-	/* Get eprom data */
-	tudata[0] = 17;
-	if (i2c_writebytes(state,0x50,tudata,1)) {
-		printk(KERN_WARNING "or51211:load_firmware error eprom addr\n");
-		return -1;
-	}
-	if (i2c_readbytes(state,0x50,&tudata[145],192)) {
-		printk(KERN_WARNING "or51211: load_firmware error eprom\n");
-		return -1;
-	}
-
-	/* Create firmware buffer */
-	for (i = 0; i < 145; i++)
-		tudata[i] = fw->data[i];
-
-	for (i = 0; i < 248; i++)
-		tudata[i+337] = fw->data[145+i];
-
-	state->config->reset(fe);
-
-	if (i2c_writebytes(state,state->config->demod_address,tudata,585)) {
-		printk(KERN_WARNING "or51211: load_firmware error 1\n");
-		return -1;
-	}
-	msleep(1);
-
-	if (i2c_writebytes(state,state->config->demod_address,
-			   &fw->data[393],8125)) {
-		printk(KERN_WARNING "or51211: load_firmware error 2\n");
-		return -1;
-	}
-	msleep(1);
-
-	if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
-		printk(KERN_WARNING "or51211: load_firmware error 3\n");
-		return -1;
-	}
-
-	/* Wait at least 5 msec */
-	msleep(10);
-	if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
-		printk(KERN_WARNING "or51211: load_firmware error 4\n");
-		return -1;
-	}
-	msleep(10);
-
-	printk("or51211: Done.\n");
-	return 0;
-};
-
-static int or51211_setmode(struct dvb_frontend* fe, int mode)
-{
-	struct or51211_state* state = fe->demodulator_priv;
-	u8 rec_buf[14];
-
-	state->config->setmode(fe, mode);
-
-	if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
-		printk(KERN_WARNING "or51211: setmode error 1\n");
-		return -1;
-	}
-
-	/* Wait at least 5 msec */
-	msleep(10);
-	if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
-		printk(KERN_WARNING "or51211: setmode error 2\n");
-		return -1;
-	}
-
-	msleep(10);
-
-	/* Set operation mode in Receiver 1 register;
-	 * type 1:
-	 * data 0x50h  Automatic sets receiver channel conditions
-	 *             Automatic NTSC rejection filter
-	 *             Enable  MPEG serial data output
-	 *             MPEG2tr
-	 *             High tuner phase noise
-	 *             normal +/-150kHz Carrier acquisition range
-	 */
-	if (i2c_writebytes(state,state->config->demod_address,cmd_buf,3)) {
-		printk(KERN_WARNING "or51211: setmode error 3\n");
-		return -1;
-	}
-
-	rec_buf[0] = 0x04;
-	rec_buf[1] = 0x00;
-	rec_buf[2] = 0x03;
-	rec_buf[3] = 0x00;
-	msleep(20);
-	if (i2c_writebytes(state,state->config->demod_address,rec_buf,3)) {
-		printk(KERN_WARNING "or51211: setmode error 5\n");
-	}
-	msleep(3);
-	if (i2c_readbytes(state,state->config->demod_address,&rec_buf[10],2)) {
-		printk(KERN_WARNING "or51211: setmode error 6");
-		return -1;
-	}
-	dprintk("setmode rec status %02x %02x\n",rec_buf[10],rec_buf[11]);
-
-	return 0;
-}
-
-static int or51211_set_parameters(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct or51211_state* state = fe->demodulator_priv;
-
-	/* Change only if we are actually changing the channel */
-	if (state->current_frequency != p->frequency) {
-		if (fe->ops.tuner_ops.set_params) {
-			fe->ops.tuner_ops.set_params(fe);
-			if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-		}
-
-		/* Set to ATSC mode */
-		or51211_setmode(fe,0);
-
-		/* Update current frequency */
-		state->current_frequency = p->frequency;
-	}
-	return 0;
-}
-
-static int or51211_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct or51211_state* state = fe->demodulator_priv;
-	unsigned char rec_buf[2];
-	unsigned char snd_buf[] = {0x04,0x00,0x03,0x00};
-	*status = 0;
-
-	/* Receiver Status */
-	if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) {
-		printk(KERN_WARNING "or51132: read_status write error\n");
-		return -1;
-	}
-	msleep(3);
-	if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
-		printk(KERN_WARNING "or51132: read_status read error\n");
-		return -1;
-	}
-	dprintk("read_status %x %x\n",rec_buf[0],rec_buf[1]);
-
-	if (rec_buf[0] &  0x01) { /* Receiver Lock */
-		*status |= FE_HAS_SIGNAL;
-		*status |= FE_HAS_CARRIER;
-		*status |= FE_HAS_VITERBI;
-		*status |= FE_HAS_SYNC;
-		*status |= FE_HAS_LOCK;
-	}
-	return 0;
-}
-
-/* Calculate SNR estimation (scaled by 2^24)
-
-   8-VSB SNR equation from Oren datasheets
-
-   For 8-VSB:
-     SNR[dB] = 10 * log10(219037.9454 / MSE^2 )
-
-   We re-write the snr equation as:
-     SNR * 2^24 = 10*(c - 2*intlog10(MSE))
-   Where for 8-VSB, c = log10(219037.9454) * 2^24 */
-
-static u32 calculate_snr(u32 mse, u32 c)
-{
-	if (mse == 0) /* No signal */
-		return 0;
-
-	mse = 2*intlog10(mse);
-	if (mse > c) {
-		/* Negative SNR, which is possible, but realisticly the
-		demod will lose lock before the signal gets this bad.  The
-		API only allows for unsigned values, so just return 0 */
-		return 0;
-	}
-	return 10*(c - mse);
-}
-
-static int or51211_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct or51211_state* state = fe->demodulator_priv;
-	u8 rec_buf[2];
-	u8 snd_buf[3];
-
-	/* SNR after Equalizer */
-	snd_buf[0] = 0x04;
-	snd_buf[1] = 0x00;
-	snd_buf[2] = 0x04;
-
-	if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) {
-		printk(KERN_WARNING "%s: error writing snr reg\n",
-		       __func__);
-		return -1;
-	}
-	if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
-		printk(KERN_WARNING "%s: read_status read error\n",
-		       __func__);
-		return -1;
-	}
-
-	state->snr = calculate_snr(rec_buf[0], 89599047);
-	*snr = (state->snr) >> 16;
-
-	dprintk("%s: noise = 0x%02x, snr = %d.%02d dB\n", __func__, rec_buf[0],
-		state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16);
-
-	return 0;
-}
-
-static int or51211_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	/* Calculate Strength from SNR up to 35dB */
-	/* Even though the SNR can go higher than 35dB, there is some comfort */
-	/* factor in having a range of strong signals that can show at 100%   */
-	struct or51211_state* state = (struct or51211_state*)fe->demodulator_priv;
-	u16 snr;
-	int ret;
-
-	ret = fe->ops.read_snr(fe, &snr);
-	if (ret != 0)
-		return ret;
-	/* Rather than use the 8.8 value snr, use state->snr which is 8.24 */
-	/* scale the range 0 - 35*2^24 into 0 - 65535 */
-	if (state->snr >= 8960 * 0x10000)
-		*strength = 0xffff;
-	else
-		*strength = state->snr / 8960;
-
-	return 0;
-}
-
-static int or51211_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	*ber = -ENOSYS;
-	return 0;
-}
-
-static int or51211_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	*ucblocks = -ENOSYS;
-	return 0;
-}
-
-static int or51211_sleep(struct dvb_frontend* fe)
-{
-	return 0;
-}
-
-static int or51211_init(struct dvb_frontend* fe)
-{
-	struct or51211_state* state = fe->demodulator_priv;
-	const struct or51211_config* config = state->config;
-	const struct firmware* fw;
-	unsigned char get_ver_buf[] = {0x04,0x00,0x30,0x00,0x00};
-	unsigned char rec_buf[14];
-	int ret,i;
-
-	if (!state->initialized) {
-		/* Request the firmware, this will block until it uploads */
-		printk(KERN_INFO "or51211: Waiting for firmware upload "
-		       "(%s)...\n", OR51211_DEFAULT_FIRMWARE);
-		ret = config->request_firmware(fe, &fw,
-					       OR51211_DEFAULT_FIRMWARE);
-		printk(KERN_INFO "or51211:Got Hotplug firmware\n");
-		if (ret) {
-			printk(KERN_WARNING "or51211: No firmware uploaded "
-			       "(timeout or file not found?)\n");
-			return ret;
-		}
-
-		ret = or51211_load_firmware(fe, fw);
-		release_firmware(fw);
-		if (ret) {
-			printk(KERN_WARNING "or51211: Writing firmware to "
-			       "device failed!\n");
-			return ret;
-		}
-		printk(KERN_INFO "or51211: Firmware upload complete.\n");
-
-		/* Set operation mode in Receiver 1 register;
-		 * type 1:
-		 * data 0x50h  Automatic sets receiver channel conditions
-		 *             Automatic NTSC rejection filter
-		 *             Enable  MPEG serial data output
-		 *             MPEG2tr
-		 *             High tuner phase noise
-		 *             normal +/-150kHz Carrier acquisition range
-		 */
-		if (i2c_writebytes(state,state->config->demod_address,
-				   cmd_buf,3)) {
-			printk(KERN_WARNING "or51211: Load DVR Error 5\n");
-			return -1;
-		}
-
-		/* Read back ucode version to besure we loaded correctly */
-		/* and are really up and running */
-		rec_buf[0] = 0x04;
-		rec_buf[1] = 0x00;
-		rec_buf[2] = 0x03;
-		rec_buf[3] = 0x00;
-		msleep(30);
-		if (i2c_writebytes(state,state->config->demod_address,
-				   rec_buf,3)) {
-			printk(KERN_WARNING "or51211: Load DVR Error A\n");
-			return -1;
-		}
-		msleep(3);
-		if (i2c_readbytes(state,state->config->demod_address,
-				  &rec_buf[10],2)) {
-			printk(KERN_WARNING "or51211: Load DVR Error B\n");
-			return -1;
-		}
-
-		rec_buf[0] = 0x04;
-		rec_buf[1] = 0x00;
-		rec_buf[2] = 0x01;
-		rec_buf[3] = 0x00;
-		msleep(20);
-		if (i2c_writebytes(state,state->config->demod_address,
-				   rec_buf,3)) {
-			printk(KERN_WARNING "or51211: Load DVR Error C\n");
-			return -1;
-		}
-		msleep(3);
-		if (i2c_readbytes(state,state->config->demod_address,
-				  &rec_buf[12],2)) {
-			printk(KERN_WARNING "or51211: Load DVR Error D\n");
-			return -1;
-		}
-
-		for (i = 0; i < 8; i++)
-			rec_buf[i]=0xed;
-
-		for (i = 0; i < 5; i++) {
-			msleep(30);
-			get_ver_buf[4] = i+1;
-			if (i2c_writebytes(state,state->config->demod_address,
-					   get_ver_buf,5)) {
-				printk(KERN_WARNING "or51211:Load DVR Error 6"
-				       " - %d\n",i);
-				return -1;
-			}
-			msleep(3);
-
-			if (i2c_readbytes(state,state->config->demod_address,
-					  &rec_buf[i*2],2)) {
-				printk(KERN_WARNING "or51211:Load DVR Error 7"
-				       " - %d\n",i);
-				return -1;
-			}
-			/* If we didn't receive the right index, try again */
-			if ((int)rec_buf[i*2+1]!=i+1){
-			  i--;
-			}
-		}
-		dprintk("read_fwbits %x %x %x %x %x %x %x %x %x %x\n",
-			rec_buf[0], rec_buf[1], rec_buf[2], rec_buf[3],
-			rec_buf[4], rec_buf[5], rec_buf[6], rec_buf[7],
-			rec_buf[8], rec_buf[9]);
-
-		printk(KERN_INFO "or51211: ver TU%02x%02x%02x VSB mode %02x"
-		       " Status %02x\n",
-		       rec_buf[2], rec_buf[4],rec_buf[6],
-		       rec_buf[12],rec_buf[10]);
-
-		rec_buf[0] = 0x04;
-		rec_buf[1] = 0x00;
-		rec_buf[2] = 0x03;
-		rec_buf[3] = 0x00;
-		msleep(20);
-		if (i2c_writebytes(state,state->config->demod_address,
-				   rec_buf,3)) {
-			printk(KERN_WARNING "or51211: Load DVR Error 8\n");
-			return -1;
-		}
-		msleep(20);
-		if (i2c_readbytes(state,state->config->demod_address,
-				  &rec_buf[8],2)) {
-			printk(KERN_WARNING "or51211: Load DVR Error 9\n");
-			return -1;
-		}
-		state->initialized = 1;
-	}
-
-	return 0;
-}
-
-static int or51211_get_tune_settings(struct dvb_frontend* fe,
-				     struct dvb_frontend_tune_settings* fesettings)
-{
-	fesettings->min_delay_ms = 500;
-	fesettings->step_size = 0;
-	fesettings->max_drift = 0;
-	return 0;
-}
-
-static void or51211_release(struct dvb_frontend* fe)
-{
-	struct or51211_state* state = fe->demodulator_priv;
-	state->config->sleep(fe);
-	kfree(state);
-}
-
-static struct dvb_frontend_ops or51211_ops;
-
-struct dvb_frontend* or51211_attach(const struct or51211_config* config,
-				    struct i2c_adapter* i2c)
-{
-	struct or51211_state* state = NULL;
-
-	/* Allocate memory for the internal state */
-	state = kzalloc(sizeof(struct or51211_state), GFP_KERNEL);
-	if (state == NULL)
-		return NULL;
-
-	/* Setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->initialized = 0;
-	state->current_frequency = 0;
-
-	/* Create dvb_frontend */
-	memcpy(&state->frontend.ops, &or51211_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-}
-
-static struct dvb_frontend_ops or51211_ops = {
-	.delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
-	.info = {
-		.name               = "Oren OR51211 VSB Frontend",
-		.frequency_min      = 44000000,
-		.frequency_max      = 958000000,
-		.frequency_stepsize = 166666,
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_8VSB
-	},
-
-	.release = or51211_release,
-
-	.init = or51211_init,
-	.sleep = or51211_sleep,
-
-	.set_frontend = or51211_set_parameters,
-	.get_tune_settings = or51211_get_tune_settings,
-
-	.read_status = or51211_read_status,
-	.read_ber = or51211_read_ber,
-	.read_signal_strength = or51211_read_signal_strength,
-	.read_snr = or51211_read_snr,
-	.read_ucblocks = or51211_read_ucblocks,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("Oren OR51211 VSB [pcHDTV HD-2000] Demodulator Driver");
-MODULE_AUTHOR("Kirk Lapray");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(or51211_attach);
-
diff --git a/drivers/media/dvb/frontends/or51211.h b/drivers/media/dvb/frontends/or51211.h
deleted file mode 100644
index 3ce0508..0000000
--- a/drivers/media/dvb/frontends/or51211.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *    Support for OR51211 (pcHDTV HD-2000) - VSB
- *
- *    Copyright (C) 2005 Kirk Lapray <kirk_lapray@bigfoot.com>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
-*/
-
-#ifndef OR51211_H
-#define OR51211_H
-
-#include <linux/dvb/frontend.h>
-#include <linux/firmware.h>
-
-struct or51211_config
-{
-	/* The demodulator's i2c address */
-	u8 demod_address;
-
-	/* Request firmware for device */
-	int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
-	void (*setmode)(struct dvb_frontend * fe, int mode);
-	void (*reset)(struct dvb_frontend * fe);
-	void (*sleep)(struct dvb_frontend * fe);
-};
-
-#if defined(CONFIG_DVB_OR51211) || (defined(CONFIG_DVB_OR51211_MODULE) && defined(MODULE))
-extern struct dvb_frontend* or51211_attach(const struct or51211_config* config,
-					   struct i2c_adapter* i2c);
-#else
-static inline struct dvb_frontend* or51211_attach(const struct or51211_config* config,
-					   struct i2c_adapter* i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_OR51211
-
-#endif // OR51211_H
-
diff --git a/drivers/media/dvb/frontends/rtl2830.c b/drivers/media/dvb/frontends/rtl2830.c
deleted file mode 100644
index 93612eb..0000000
--- a/drivers/media/dvb/frontends/rtl2830.c
+++ /dev/null
@@ -1,757 +0,0 @@
-/*
- * Realtek RTL2830 DVB-T demodulator driver
- *
- * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-
-/*
- * Driver implements own I2C-adapter for tuner I2C access. That's since chip
- * have unusual I2C-gate control which closes gate automatically after each
- * I2C transfer. Using own I2C adapter we can workaround that.
- */
-
-#include "rtl2830_priv.h"
-
-int rtl2830_debug;
-module_param_named(debug, rtl2830_debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-/* write multiple hardware registers */
-static int rtl2830_wr(struct rtl2830_priv *priv, u8 reg, u8 *val, int len)
-{
-	int ret;
-	u8 buf[1+len];
-	struct i2c_msg msg[1] = {
-		{
-			.addr = priv->cfg.i2c_addr,
-			.flags = 0,
-			.len = 1+len,
-			.buf = buf,
-		}
-	};
-
-	buf[0] = reg;
-	memcpy(&buf[1], val, len);
-
-	ret = i2c_transfer(priv->i2c, msg, 1);
-	if (ret == 1) {
-		ret = 0;
-	} else {
-		warn("i2c wr failed=%d reg=%02x len=%d", ret, reg, len);
-		ret = -EREMOTEIO;
-	}
-	return ret;
-}
-
-/* read multiple hardware registers */
-static int rtl2830_rd(struct rtl2830_priv *priv, u8 reg, u8 *val, int len)
-{
-	int ret;
-	struct i2c_msg msg[2] = {
-		{
-			.addr = priv->cfg.i2c_addr,
-			.flags = 0,
-			.len = 1,
-			.buf = &reg,
-		}, {
-			.addr = priv->cfg.i2c_addr,
-			.flags = I2C_M_RD,
-			.len = len,
-			.buf = val,
-		}
-	};
-
-	ret = i2c_transfer(priv->i2c, msg, 2);
-	if (ret == 2) {
-		ret = 0;
-	} else {
-		warn("i2c rd failed=%d reg=%02x len=%d", ret, reg, len);
-		ret = -EREMOTEIO;
-	}
-	return ret;
-}
-
-/* write multiple registers */
-static int rtl2830_wr_regs(struct rtl2830_priv *priv, u16 reg, u8 *val, int len)
-{
-	int ret;
-	u8 reg2 = (reg >> 0) & 0xff;
-	u8 page = (reg >> 8) & 0xff;
-
-	/* switch bank if needed */
-	if (page != priv->page) {
-		ret = rtl2830_wr(priv, 0x00, &page, 1);
-		if (ret)
-			return ret;
-
-		priv->page = page;
-	}
-
-	return rtl2830_wr(priv, reg2, val, len);
-}
-
-/* read multiple registers */
-static int rtl2830_rd_regs(struct rtl2830_priv *priv, u16 reg, u8 *val, int len)
-{
-	int ret;
-	u8 reg2 = (reg >> 0) & 0xff;
-	u8 page = (reg >> 8) & 0xff;
-
-	/* switch bank if needed */
-	if (page != priv->page) {
-		ret = rtl2830_wr(priv, 0x00, &page, 1);
-		if (ret)
-			return ret;
-
-		priv->page = page;
-	}
-
-	return rtl2830_rd(priv, reg2, val, len);
-}
-
-#if 0 /* currently not used */
-/* write single register */
-static int rtl2830_wr_reg(struct rtl2830_priv *priv, u16 reg, u8 val)
-{
-	return rtl2830_wr_regs(priv, reg, &val, 1);
-}
-#endif
-
-/* read single register */
-static int rtl2830_rd_reg(struct rtl2830_priv *priv, u16 reg, u8 *val)
-{
-	return rtl2830_rd_regs(priv, reg, val, 1);
-}
-
-/* write single register with mask */
-int rtl2830_wr_reg_mask(struct rtl2830_priv *priv, u16 reg, u8 val, u8 mask)
-{
-	int ret;
-	u8 tmp;
-
-	/* no need for read if whole reg is written */
-	if (mask != 0xff) {
-		ret = rtl2830_rd_regs(priv, reg, &tmp, 1);
-		if (ret)
-			return ret;
-
-		val &= mask;
-		tmp &= ~mask;
-		val |= tmp;
-	}
-
-	return rtl2830_wr_regs(priv, reg, &val, 1);
-}
-
-/* read single register with mask */
-int rtl2830_rd_reg_mask(struct rtl2830_priv *priv, u16 reg, u8 *val, u8 mask)
-{
-	int ret, i;
-	u8 tmp;
-
-	ret = rtl2830_rd_regs(priv, reg, &tmp, 1);
-	if (ret)
-		return ret;
-
-	tmp &= mask;
-
-	/* find position of the first bit */
-	for (i = 0; i < 8; i++) {
-		if ((mask >> i) & 0x01)
-			break;
-	}
-	*val = tmp >> i;
-
-	return 0;
-}
-
-static int rtl2830_init(struct dvb_frontend *fe)
-{
-	struct rtl2830_priv *priv = fe->demodulator_priv;
-	int ret, i;
-	u64 num;
-	u8 buf[3], tmp;
-	u32 if_ctl;
-	struct rtl2830_reg_val_mask tab[] = {
-		{ 0x00d, 0x01, 0x03 },
-		{ 0x00d, 0x10, 0x10 },
-		{ 0x104, 0x00, 0x1e },
-		{ 0x105, 0x80, 0x80 },
-		{ 0x110, 0x02, 0x03 },
-		{ 0x110, 0x08, 0x0c },
-		{ 0x17b, 0x00, 0x40 },
-		{ 0x17d, 0x05, 0x0f },
-		{ 0x17d, 0x50, 0xf0 },
-		{ 0x18c, 0x08, 0x0f },
-		{ 0x18d, 0x00, 0xc0 },
-		{ 0x188, 0x05, 0x0f },
-		{ 0x189, 0x00, 0xfc },
-		{ 0x2d5, 0x02, 0x02 },
-		{ 0x2f1, 0x02, 0x06 },
-		{ 0x2f1, 0x20, 0xf8 },
-		{ 0x16d, 0x00, 0x01 },
-		{ 0x1a6, 0x00, 0x80 },
-		{ 0x106, priv->cfg.vtop, 0x3f },
-		{ 0x107, priv->cfg.krf, 0x3f },
-		{ 0x112, 0x28, 0xff },
-		{ 0x103, priv->cfg.agc_targ_val, 0xff },
-		{ 0x00a, 0x02, 0x07 },
-		{ 0x140, 0x0c, 0x3c },
-		{ 0x140, 0x40, 0xc0 },
-		{ 0x15b, 0x05, 0x07 },
-		{ 0x15b, 0x28, 0x38 },
-		{ 0x15c, 0x05, 0x07 },
-		{ 0x15c, 0x28, 0x38 },
-		{ 0x115, priv->cfg.spec_inv, 0x01 },
-		{ 0x16f, 0x01, 0x07 },
-		{ 0x170, 0x18, 0x38 },
-		{ 0x172, 0x0f, 0x0f },
-		{ 0x173, 0x08, 0x38 },
-		{ 0x175, 0x01, 0x07 },
-		{ 0x176, 0x00, 0xc0 },
-	};
-
-	for (i = 0; i < ARRAY_SIZE(tab); i++) {
-		ret = rtl2830_wr_reg_mask(priv, tab[i].reg, tab[i].val,
-			tab[i].mask);
-		if (ret)
-			goto err;
-	}
-
-	ret = rtl2830_wr_regs(priv, 0x18f, "\x28\x00", 2);
-	if (ret)
-		goto err;
-
-	ret = rtl2830_wr_regs(priv, 0x195,
-		"\x04\x06\x0a\x12\x0a\x12\x1e\x28", 8);
-	if (ret)
-		goto err;
-
-	num = priv->cfg.if_dvbt % priv->cfg.xtal;
-	num *= 0x400000;
-	num = div_u64(num, priv->cfg.xtal);
-	num = -num;
-	if_ctl = num & 0x3fffff;
-	dbg("%s: if_ctl=%08x", __func__, if_ctl);
-
-	ret = rtl2830_rd_reg_mask(priv, 0x119, &tmp, 0xc0); /* b[7:6] */
-	if (ret)
-		goto err;
-
-	buf[0] = tmp << 6;
-	buf[0] = (if_ctl >> 16) & 0x3f;
-	buf[1] = (if_ctl >>  8) & 0xff;
-	buf[2] = (if_ctl >>  0) & 0xff;
-
-	ret = rtl2830_wr_regs(priv, 0x119, buf, 3);
-	if (ret)
-		goto err;
-
-	/* TODO: spec init */
-
-	/* soft reset */
-	ret = rtl2830_wr_reg_mask(priv, 0x101, 0x04, 0x04);
-	if (ret)
-		goto err;
-
-	ret = rtl2830_wr_reg_mask(priv, 0x101, 0x00, 0x04);
-	if (ret)
-		goto err;
-
-	priv->sleeping = false;
-
-	return ret;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int rtl2830_sleep(struct dvb_frontend *fe)
-{
-	struct rtl2830_priv *priv = fe->demodulator_priv;
-	priv->sleeping = true;
-	return 0;
-}
-
-int rtl2830_get_tune_settings(struct dvb_frontend *fe,
-	struct dvb_frontend_tune_settings *s)
-{
-	s->min_delay_ms = 500;
-	s->step_size = fe->ops.info.frequency_stepsize * 2;
-	s->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1;
-
-	return 0;
-}
-
-static int rtl2830_set_frontend(struct dvb_frontend *fe)
-{
-	struct rtl2830_priv *priv = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	int ret, i;
-	static u8 bw_params1[3][34] = {
-		{
-		0x1f, 0xf0, 0x1f, 0xf0, 0x1f, 0xfa, 0x00, 0x17, 0x00, 0x41,
-		0x00, 0x64, 0x00, 0x67, 0x00, 0x38, 0x1f, 0xde, 0x1f, 0x7a,
-		0x1f, 0x47, 0x1f, 0x7c, 0x00, 0x30, 0x01, 0x4b, 0x02, 0x82,
-		0x03, 0x73, 0x03, 0xcf, /* 6 MHz */
-		}, {
-		0x1f, 0xfa, 0x1f, 0xda, 0x1f, 0xc1, 0x1f, 0xb3, 0x1f, 0xca,
-		0x00, 0x07, 0x00, 0x4d, 0x00, 0x6d, 0x00, 0x40, 0x1f, 0xca,
-		0x1f, 0x4d, 0x1f, 0x2a, 0x1f, 0xb2, 0x00, 0xec, 0x02, 0x7e,
-		0x03, 0xd0, 0x04, 0x53, /* 7 MHz */
-		}, {
-		0x00, 0x10, 0x00, 0x0e, 0x1f, 0xf7, 0x1f, 0xc9, 0x1f, 0xa0,
-		0x1f, 0xa6, 0x1f, 0xec, 0x00, 0x4e, 0x00, 0x7d, 0x00, 0x3a,
-		0x1f, 0x98, 0x1f, 0x10, 0x1f, 0x40, 0x00, 0x75, 0x02, 0x5f,
-		0x04, 0x24, 0x04, 0xdb, /* 8 MHz */
-		},
-	};
-	static u8 bw_params2[3][6] = {
-		{0xc3, 0x0c, 0x44, 0x33, 0x33, 0x30,}, /* 6 MHz */
-		{0xb8, 0xe3, 0x93, 0x99, 0x99, 0x98,}, /* 7 MHz */
-		{0xae, 0xba, 0xf3, 0x26, 0x66, 0x64,}, /* 8 MHz */
-	};
-
-
-	dbg("%s: frequency=%d bandwidth_hz=%d inversion=%d", __func__,
-		c->frequency, c->bandwidth_hz, c->inversion);
-
-	/* program tuner */
-	if (fe->ops.tuner_ops.set_params)
-		fe->ops.tuner_ops.set_params(fe);
-
-	switch (c->bandwidth_hz) {
-	case 6000000:
-		i = 0;
-		break;
-	case 7000000:
-		i = 1;
-		break;
-	case 8000000:
-		i = 2;
-		break;
-	default:
-		dbg("invalid bandwidth");
-		return -EINVAL;
-	}
-
-	ret = rtl2830_wr_reg_mask(priv, 0x008, i << 1, 0x06);
-	if (ret)
-		goto err;
-
-	/* 1/2 split I2C write */
-	ret = rtl2830_wr_regs(priv, 0x11c, &bw_params1[i][0], 17);
-	if (ret)
-		goto err;
-
-	/* 2/2 split I2C write */
-	ret = rtl2830_wr_regs(priv, 0x12d, &bw_params1[i][17], 17);
-	if (ret)
-		goto err;
-
-	ret = rtl2830_wr_regs(priv, 0x19d, bw_params2[i], 6);
-	if (ret)
-		goto err;
-
-	return ret;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int rtl2830_get_frontend(struct dvb_frontend *fe)
-{
-	struct rtl2830_priv *priv = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	int ret;
-	u8 buf[3];
-
-	if (priv->sleeping)
-		return 0;
-
-	ret = rtl2830_rd_regs(priv, 0x33c, buf, 2);
-	if (ret)
-		goto err;
-
-	ret = rtl2830_rd_reg(priv, 0x351, &buf[2]);
-	if (ret)
-		goto err;
-
-	dbg("%s: TPS=%02x %02x %02x", __func__, buf[0], buf[1], buf[2]);
-
-	switch ((buf[0] >> 2) & 3) {
-	case 0:
-		c->modulation = QPSK;
-		break;
-	case 1:
-		c->modulation = QAM_16;
-		break;
-	case 2:
-		c->modulation = QAM_64;
-		break;
-	}
-
-	switch ((buf[2] >> 2) & 1) {
-	case 0:
-		c->transmission_mode = TRANSMISSION_MODE_2K;
-		break;
-	case 1:
-		c->transmission_mode = TRANSMISSION_MODE_8K;
-	}
-
-	switch ((buf[2] >> 0) & 3) {
-	case 0:
-		c->guard_interval = GUARD_INTERVAL_1_32;
-		break;
-	case 1:
-		c->guard_interval = GUARD_INTERVAL_1_16;
-		break;
-	case 2:
-		c->guard_interval = GUARD_INTERVAL_1_8;
-		break;
-	case 3:
-		c->guard_interval = GUARD_INTERVAL_1_4;
-		break;
-	}
-
-	switch ((buf[0] >> 4) & 7) {
-	case 0:
-		c->hierarchy = HIERARCHY_NONE;
-		break;
-	case 1:
-		c->hierarchy = HIERARCHY_1;
-		break;
-	case 2:
-		c->hierarchy = HIERARCHY_2;
-		break;
-	case 3:
-		c->hierarchy = HIERARCHY_4;
-		break;
-	}
-
-	switch ((buf[1] >> 3) & 7) {
-	case 0:
-		c->code_rate_HP = FEC_1_2;
-		break;
-	case 1:
-		c->code_rate_HP = FEC_2_3;
-		break;
-	case 2:
-		c->code_rate_HP = FEC_3_4;
-		break;
-	case 3:
-		c->code_rate_HP = FEC_5_6;
-		break;
-	case 4:
-		c->code_rate_HP = FEC_7_8;
-		break;
-	}
-
-	switch ((buf[1] >> 0) & 7) {
-	case 0:
-		c->code_rate_LP = FEC_1_2;
-		break;
-	case 1:
-		c->code_rate_LP = FEC_2_3;
-		break;
-	case 2:
-		c->code_rate_LP = FEC_3_4;
-		break;
-	case 3:
-		c->code_rate_LP = FEC_5_6;
-		break;
-	case 4:
-		c->code_rate_LP = FEC_7_8;
-		break;
-	}
-
-	return 0;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int rtl2830_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct rtl2830_priv *priv = fe->demodulator_priv;
-	int ret;
-	u8 tmp;
-	*status = 0;
-
-	if (priv->sleeping)
-		return 0;
-
-	ret = rtl2830_rd_reg_mask(priv, 0x351, &tmp, 0x78); /* [6:3] */
-	if (ret)
-		goto err;
-
-	if (tmp == 11) {
-		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
-			FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
-	} else if (tmp == 10) {
-		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
-			FE_HAS_VITERBI;
-	}
-
-	return ret;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int rtl2830_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct rtl2830_priv *priv = fe->demodulator_priv;
-	int ret, hierarchy, constellation;
-	u8 buf[2], tmp;
-	u16 tmp16;
-#define CONSTELLATION_NUM 3
-#define HIERARCHY_NUM 4
-	static const u32 snr_constant[CONSTELLATION_NUM][HIERARCHY_NUM] = {
-		{ 70705899, 70705899, 70705899, 70705899 },
-		{ 82433173, 82433173, 87483115, 94445660 },
-		{ 92888734, 92888734, 95487525, 99770748 },
-	};
-
-	if (priv->sleeping)
-		return 0;
-
-	/* reports SNR in resolution of 0.1 dB */
-
-	ret = rtl2830_rd_reg(priv, 0x33c, &tmp);
-	if (ret)
-		goto err;
-
-	constellation = (tmp >> 2) & 0x03; /* [3:2] */
-	if (constellation > CONSTELLATION_NUM - 1)
-		goto err;
-
-	hierarchy = (tmp >> 4) & 0x07; /* [6:4] */
-	if (hierarchy > HIERARCHY_NUM - 1)
-		goto err;
-
-	ret = rtl2830_rd_regs(priv, 0x40c, buf, 2);
-	if (ret)
-		goto err;
-
-	tmp16 = buf[0] << 8 | buf[1];
-
-	if (tmp16)
-		*snr = (snr_constant[constellation][hierarchy] -
-				intlog10(tmp16)) / ((1 << 24) / 100);
-	else
-		*snr = 0;
-
-	return 0;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int rtl2830_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct rtl2830_priv *priv = fe->demodulator_priv;
-	int ret;
-	u8 buf[2];
-
-	if (priv->sleeping)
-		return 0;
-
-	ret = rtl2830_rd_regs(priv, 0x34e, buf, 2);
-	if (ret)
-		goto err;
-
-	*ber = buf[0] << 8 | buf[1];
-
-	return 0;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int rtl2830_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	*ucblocks = 0;
-	return 0;
-}
-
-static int rtl2830_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	struct rtl2830_priv *priv = fe->demodulator_priv;
-	int ret;
-	u8 buf[2];
-	u16 if_agc_raw, if_agc;
-
-	if (priv->sleeping)
-		return 0;
-
-	ret = rtl2830_rd_regs(priv, 0x359, buf, 2);
-	if (ret)
-		goto err;
-
-	if_agc_raw = (buf[0] << 8 | buf[1]) & 0x3fff;
-
-	if (if_agc_raw & (1 << 9))
-		if_agc = -(~(if_agc_raw - 1) & 0x1ff);
-	else
-		if_agc = if_agc_raw;
-
-	*strength = (u8) (55 - if_agc / 182);
-	*strength |= *strength << 8;
-
-	return 0;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static struct dvb_frontend_ops rtl2830_ops;
-
-static u32 rtl2830_tuner_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static int rtl2830_tuner_i2c_xfer(struct i2c_adapter *i2c_adap,
-	struct i2c_msg msg[], int num)
-{
-	struct rtl2830_priv *priv = i2c_get_adapdata(i2c_adap);
-	int ret;
-
-	/* open i2c-gate */
-	ret = rtl2830_wr_reg_mask(priv, 0x101, 0x08, 0x08);
-	if (ret)
-		goto err;
-
-	ret = i2c_transfer(priv->i2c, msg, num);
-	if (ret < 0)
-		warn("tuner i2c failed=%d", ret);
-
-	return ret;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static struct i2c_algorithm rtl2830_tuner_i2c_algo = {
-	.master_xfer   = rtl2830_tuner_i2c_xfer,
-	.functionality = rtl2830_tuner_i2c_func,
-};
-
-struct i2c_adapter *rtl2830_get_tuner_i2c_adapter(struct dvb_frontend *fe)
-{
-	struct rtl2830_priv *priv = fe->demodulator_priv;
-	return &priv->tuner_i2c_adapter;
-}
-EXPORT_SYMBOL(rtl2830_get_tuner_i2c_adapter);
-
-static void rtl2830_release(struct dvb_frontend *fe)
-{
-	struct rtl2830_priv *priv = fe->demodulator_priv;
-
-	i2c_del_adapter(&priv->tuner_i2c_adapter);
-	kfree(priv);
-}
-
-struct dvb_frontend *rtl2830_attach(const struct rtl2830_config *cfg,
-	struct i2c_adapter *i2c)
-{
-	struct rtl2830_priv *priv = NULL;
-	int ret = 0;
-	u8 tmp;
-
-	/* allocate memory for the internal state */
-	priv = kzalloc(sizeof(struct rtl2830_priv), GFP_KERNEL);
-	if (priv == NULL)
-		goto err;
-
-	/* setup the priv */
-	priv->i2c = i2c;
-	memcpy(&priv->cfg, cfg, sizeof(struct rtl2830_config));
-
-	/* check if the demod is there */
-	ret = rtl2830_rd_reg(priv, 0x000, &tmp);
-	if (ret)
-		goto err;
-
-	/* create dvb_frontend */
-	memcpy(&priv->fe.ops, &rtl2830_ops, sizeof(struct dvb_frontend_ops));
-	priv->fe.demodulator_priv = priv;
-
-	/* create tuner i2c adapter */
-	strlcpy(priv->tuner_i2c_adapter.name, "RTL2830 tuner I2C adapter",
-		sizeof(priv->tuner_i2c_adapter.name));
-	priv->tuner_i2c_adapter.algo = &rtl2830_tuner_i2c_algo;
-	priv->tuner_i2c_adapter.algo_data = NULL;
-	i2c_set_adapdata(&priv->tuner_i2c_adapter, priv);
-	if (i2c_add_adapter(&priv->tuner_i2c_adapter) < 0) {
-		err("tuner I2C bus could not be initialized");
-		goto err;
-	}
-
-	priv->sleeping = true;
-
-	return &priv->fe;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	kfree(priv);
-	return NULL;
-}
-EXPORT_SYMBOL(rtl2830_attach);
-
-static struct dvb_frontend_ops rtl2830_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name = "Realtek RTL2830 (DVB-T)",
-		.caps = FE_CAN_FEC_1_2 |
-			FE_CAN_FEC_2_3 |
-			FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 |
-			FE_CAN_FEC_7_8 |
-			FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK |
-			FE_CAN_QAM_16 |
-			FE_CAN_QAM_64 |
-			FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO |
-			FE_CAN_GUARD_INTERVAL_AUTO |
-			FE_CAN_HIERARCHY_AUTO |
-			FE_CAN_RECOVER |
-			FE_CAN_MUTE_TS
-	},
-
-	.release = rtl2830_release,
-
-	.init = rtl2830_init,
-	.sleep = rtl2830_sleep,
-
-	.get_tune_settings = rtl2830_get_tune_settings,
-
-	.set_frontend = rtl2830_set_frontend,
-	.get_frontend = rtl2830_get_frontend,
-
-	.read_status = rtl2830_read_status,
-	.read_snr = rtl2830_read_snr,
-	.read_ber = rtl2830_read_ber,
-	.read_ucblocks = rtl2830_read_ucblocks,
-	.read_signal_strength = rtl2830_read_signal_strength,
-};
-
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_DESCRIPTION("Realtek RTL2830 DVB-T demodulator driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/rtl2830.h b/drivers/media/dvb/frontends/rtl2830.h
deleted file mode 100644
index 1c6ee91..0000000
--- a/drivers/media/dvb/frontends/rtl2830.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Realtek RTL2830 DVB-T demodulator driver
- *
- * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef RTL2830_H
-#define RTL2830_H
-
-#include <linux/dvb/frontend.h>
-
-struct rtl2830_config {
-	/*
-	 * Demodulator I2C address.
-	 */
-	u8 i2c_addr;
-
-	/*
-	 * Xtal frequency.
-	 * Hz
-	 * 4000000, 16000000, 25000000, 28800000
-	 */
-	u32 xtal;
-
-	/*
-	 * TS output mode.
-	 */
-	u8 ts_mode;
-
-	/*
-	 * Spectrum inversion.
-	 */
-	bool spec_inv;
-
-	/*
-	 * IFs for all used modes.
-	 * Hz
-	 * 4570000, 4571429, 36000000, 36125000, 36166667, 44000000
-	 */
-	u32 if_dvbt;
-
-	/*
-	 */
-	u8 vtop;
-
-	/*
-	 */
-	u8 krf;
-
-	/*
-	 */
-	u8 agc_targ_val;
-};
-
-#if defined(CONFIG_DVB_RTL2830) || \
-	(defined(CONFIG_DVB_RTL2830_MODULE) && defined(MODULE))
-extern struct dvb_frontend *rtl2830_attach(
-	const struct rtl2830_config *config,
-	struct i2c_adapter *i2c
-);
-
-extern struct i2c_adapter *rtl2830_get_tuner_i2c_adapter(
-	struct dvb_frontend *fe
-);
-#else
-static inline struct dvb_frontend *rtl2830_attach(
-	const struct rtl2830_config *config,
-	struct i2c_adapter *i2c
-)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-static inline struct i2c_adapter *rtl2830_get_tuner_i2c_adapter(
-	struct dvb_frontend *fe
-)
-{
-	return NULL;
-}
-#endif
-
-#endif /* RTL2830_H */
diff --git a/drivers/media/dvb/frontends/rtl2830_priv.h b/drivers/media/dvb/frontends/rtl2830_priv.h
deleted file mode 100644
index 9b20557..0000000
--- a/drivers/media/dvb/frontends/rtl2830_priv.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Realtek RTL2830 DVB-T demodulator driver
- *
- * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef RTL2830_PRIV_H
-#define RTL2830_PRIV_H
-
-#include "dvb_frontend.h"
-#include "dvb_math.h"
-#include "rtl2830.h"
-
-#define LOG_PREFIX "rtl2830"
-
-#undef dbg
-#define dbg(f, arg...) \
-	if (rtl2830_debug) \
-		printk(KERN_INFO            LOG_PREFIX": " f "\n" , ## arg)
-#undef err
-#define err(f, arg...)  printk(KERN_ERR     LOG_PREFIX": " f "\n" , ## arg)
-#undef info
-#define info(f, arg...) printk(KERN_INFO    LOG_PREFIX": " f "\n" , ## arg)
-#undef warn
-#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg)
-
-struct rtl2830_priv {
-	struct i2c_adapter *i2c;
-	struct dvb_frontend fe;
-	struct rtl2830_config cfg;
-	struct i2c_adapter tuner_i2c_adapter;
-
-	bool sleeping;
-
-	u8 page; /* active register page */
-};
-
-struct rtl2830_reg_val_mask {
-	u16 reg;
-	u8  val;
-	u8  mask;
-};
-
-#endif /* RTL2830_PRIV_H */
diff --git a/drivers/media/dvb/frontends/rtl2832.c b/drivers/media/dvb/frontends/rtl2832.c
deleted file mode 100644
index 28269cc..0000000
--- a/drivers/media/dvb/frontends/rtl2832.c
+++ /dev/null
@@ -1,789 +0,0 @@
-/*
- * Realtek RTL2832 DVB-T demodulator driver
- *
- * Copyright (C) 2012 Thomas Mair <thomas.mair86@gmail.com>
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License along
- *	with this program; if not, write to the Free Software Foundation, Inc.,
- *	51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include "rtl2832_priv.h"
-#include <linux/bitops.h>
-
-int rtl2832_debug;
-module_param_named(debug, rtl2832_debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-#define REG_MASK(b) (BIT(b + 1) - 1)
-
-static const struct rtl2832_reg_entry registers[] = {
-	[DVBT_SOFT_RST]		= {0x1, 0x1,   2, 2},
-	[DVBT_IIC_REPEAT]	= {0x1, 0x1,   3, 3},
-	[DVBT_TR_WAIT_MIN_8K]	= {0x1, 0x88, 11, 2},
-	[DVBT_RSD_BER_FAIL_VAL]	= {0x1, 0x8f, 15, 0},
-	[DVBT_EN_BK_TRK]	= {0x1, 0xa6,  7, 7},
-	[DVBT_AD_EN_REG]	= {0x0, 0x8,   7, 7},
-	[DVBT_AD_EN_REG1]	= {0x0, 0x8,   6, 6},
-	[DVBT_EN_BBIN]		= {0x1, 0xb1,  0, 0},
-	[DVBT_MGD_THD0]		= {0x1, 0x95,  7, 0},
-	[DVBT_MGD_THD1]		= {0x1, 0x96,  7, 0},
-	[DVBT_MGD_THD2]		= {0x1, 0x97,  7, 0},
-	[DVBT_MGD_THD3]		= {0x1, 0x98,  7, 0},
-	[DVBT_MGD_THD4]		= {0x1, 0x99,  7, 0},
-	[DVBT_MGD_THD5]		= {0x1, 0x9a,  7, 0},
-	[DVBT_MGD_THD6]		= {0x1, 0x9b,  7, 0},
-	[DVBT_MGD_THD7]		= {0x1, 0x9c,  7, 0},
-	[DVBT_EN_CACQ_NOTCH]	= {0x1, 0x61,  4, 4},
-	[DVBT_AD_AV_REF]	= {0x0, 0x9,   6, 0},
-	[DVBT_REG_PI]		= {0x0, 0xa,   2, 0},
-	[DVBT_PIP_ON]		= {0x0, 0x21,  3, 3},
-	[DVBT_SCALE1_B92]	= {0x2, 0x92,  7, 0},
-	[DVBT_SCALE1_B93]	= {0x2, 0x93,  7, 0},
-	[DVBT_SCALE1_BA7]	= {0x2, 0xa7,  7, 0},
-	[DVBT_SCALE1_BA9]	= {0x2, 0xa9,  7, 0},
-	[DVBT_SCALE1_BAA]	= {0x2, 0xaa,  7, 0},
-	[DVBT_SCALE1_BAB]	= {0x2, 0xab,  7, 0},
-	[DVBT_SCALE1_BAC]	= {0x2, 0xac,  7, 0},
-	[DVBT_SCALE1_BB0]	= {0x2, 0xb0,  7, 0},
-	[DVBT_SCALE1_BB1]	= {0x2, 0xb1,  7, 0},
-	[DVBT_KB_P1]		= {0x1, 0x64,  3, 1},
-	[DVBT_KB_P2]		= {0x1, 0x64,  6, 4},
-	[DVBT_KB_P3]		= {0x1, 0x65,  2, 0},
-	[DVBT_OPT_ADC_IQ]	= {0x0, 0x6,   5, 4},
-	[DVBT_AD_AVI]		= {0x0, 0x9,   1, 0},
-	[DVBT_AD_AVQ]		= {0x0, 0x9,   3, 2},
-	[DVBT_K1_CR_STEP12]	= {0x2, 0xad,  9, 4},
-	[DVBT_TRK_KS_P2]	= {0x1, 0x6f,  2, 0},
-	[DVBT_TRK_KS_I2]	= {0x1, 0x70,  5, 3},
-	[DVBT_TR_THD_SET2]	= {0x1, 0x72,  3, 0},
-	[DVBT_TRK_KC_P2]	= {0x1, 0x73,  5, 3},
-	[DVBT_TRK_KC_I2]	= {0x1, 0x75,  2, 0},
-	[DVBT_CR_THD_SET2]	= {0x1, 0x76,  7, 6},
-	[DVBT_PSET_IFFREQ]	= {0x1, 0x19, 21, 0},
-	[DVBT_SPEC_INV]		= {0x1, 0x15,  0, 0},
-	[DVBT_RSAMP_RATIO]	= {0x1, 0x9f, 27, 2},
-	[DVBT_CFREQ_OFF_RATIO]	= {0x1, 0x9d, 23, 4},
-	[DVBT_FSM_STAGE]	= {0x3, 0x51,  6, 3},
-	[DVBT_RX_CONSTEL]	= {0x3, 0x3c,  3, 2},
-	[DVBT_RX_HIER]		= {0x3, 0x3c,  6, 4},
-	[DVBT_RX_C_RATE_LP]	= {0x3, 0x3d,  2, 0},
-	[DVBT_RX_C_RATE_HP]	= {0x3, 0x3d,  5, 3},
-	[DVBT_GI_IDX]		= {0x3, 0x51,  1, 0},
-	[DVBT_FFT_MODE_IDX]	= {0x3, 0x51,  2, 2},
-	[DVBT_RSD_BER_EST]	= {0x3, 0x4e, 15, 0},
-	[DVBT_CE_EST_EVM]	= {0x4, 0xc,  15, 0},
-	[DVBT_RF_AGC_VAL]	= {0x3, 0x5b, 13, 0},
-	[DVBT_IF_AGC_VAL]	= {0x3, 0x59, 13, 0},
-	[DVBT_DAGC_VAL]		= {0x3, 0x5,   7, 0},
-	[DVBT_SFREQ_OFF]	= {0x3, 0x18, 13, 0},
-	[DVBT_CFREQ_OFF]	= {0x3, 0x5f, 17, 0},
-	[DVBT_POLAR_RF_AGC]	= {0x0, 0xe,   1, 1},
-	[DVBT_POLAR_IF_AGC]	= {0x0, 0xe,   0, 0},
-	[DVBT_AAGC_HOLD]	= {0x1, 0x4,   5, 5},
-	[DVBT_EN_RF_AGC]	= {0x1, 0x4,   6, 6},
-	[DVBT_EN_IF_AGC]	= {0x1, 0x4,   7, 7},
-	[DVBT_IF_AGC_MIN]	= {0x1, 0x8,   7, 0},
-	[DVBT_IF_AGC_MAX]	= {0x1, 0x9,   7, 0},
-	[DVBT_RF_AGC_MIN]	= {0x1, 0xa,   7, 0},
-	[DVBT_RF_AGC_MAX]	= {0x1, 0xb,   7, 0},
-	[DVBT_IF_AGC_MAN]	= {0x1, 0xc,   6, 6},
-	[DVBT_IF_AGC_MAN_VAL]	= {0x1, 0xc,  13, 0},
-	[DVBT_RF_AGC_MAN]	= {0x1, 0xe,   6, 6},
-	[DVBT_RF_AGC_MAN_VAL]	= {0x1, 0xe,  13, 0},
-	[DVBT_DAGC_TRG_VAL]	= {0x1, 0x12,  7, 0},
-	[DVBT_AGC_TARG_VAL_0]	= {0x1, 0x2,   0, 0},
-	[DVBT_AGC_TARG_VAL_8_1]	= {0x1, 0x3,   7, 0},
-	[DVBT_AAGC_LOOP_GAIN]	= {0x1, 0xc7,  5, 1},
-	[DVBT_LOOP_GAIN2_3_0]	= {0x1, 0x4,   4, 1},
-	[DVBT_LOOP_GAIN2_4]	= {0x1, 0x5,   7, 7},
-	[DVBT_LOOP_GAIN3]	= {0x1, 0xc8,  4, 0},
-	[DVBT_VTOP1]		= {0x1, 0x6,   5, 0},
-	[DVBT_VTOP2]		= {0x1, 0xc9,  5, 0},
-	[DVBT_VTOP3]		= {0x1, 0xca,  5, 0},
-	[DVBT_KRF1]		= {0x1, 0xcb,  7, 0},
-	[DVBT_KRF2]		= {0x1, 0x7,   7, 0},
-	[DVBT_KRF3]		= {0x1, 0xcd,  7, 0},
-	[DVBT_KRF4]		= {0x1, 0xce,  7, 0},
-	[DVBT_EN_GI_PGA]	= {0x1, 0xe5,  0, 0},
-	[DVBT_THD_LOCK_UP]	= {0x1, 0xd9,  8, 0},
-	[DVBT_THD_LOCK_DW]	= {0x1, 0xdb,  8, 0},
-	[DVBT_THD_UP1]		= {0x1, 0xdd,  7, 0},
-	[DVBT_THD_DW1]		= {0x1, 0xde,  7, 0},
-	[DVBT_INTER_CNT_LEN]	= {0x1, 0xd8,  3, 0},
-	[DVBT_GI_PGA_STATE]	= {0x1, 0xe6,  3, 3},
-	[DVBT_EN_AGC_PGA]	= {0x1, 0xd7,  0, 0},
-	[DVBT_CKOUTPAR]		= {0x1, 0x7b,  5, 5},
-	[DVBT_CKOUT_PWR]	= {0x1, 0x7b,  6, 6},
-	[DVBT_SYNC_DUR]		= {0x1, 0x7b,  7, 7},
-	[DVBT_ERR_DUR]		= {0x1, 0x7c,  0, 0},
-	[DVBT_SYNC_LVL]		= {0x1, 0x7c,  1, 1},
-	[DVBT_ERR_LVL]		= {0x1, 0x7c,  2, 2},
-	[DVBT_VAL_LVL]		= {0x1, 0x7c,  3, 3},
-	[DVBT_SERIAL]		= {0x1, 0x7c,  4, 4},
-	[DVBT_SER_LSB]		= {0x1, 0x7c,  5, 5},
-	[DVBT_CDIV_PH0]		= {0x1, 0x7d,  3, 0},
-	[DVBT_CDIV_PH1]		= {0x1, 0x7d,  7, 4},
-	[DVBT_MPEG_IO_OPT_2_2]	= {0x0, 0x6,   7, 7},
-	[DVBT_MPEG_IO_OPT_1_0]	= {0x0, 0x7,   7, 6},
-	[DVBT_CKOUTPAR_PIP]	= {0x0, 0xb7,  4, 4},
-	[DVBT_CKOUT_PWR_PIP]	= {0x0, 0xb7,  3, 3},
-	[DVBT_SYNC_LVL_PIP]	= {0x0, 0xb7,  2, 2},
-	[DVBT_ERR_LVL_PIP]	= {0x0, 0xb7,  1, 1},
-	[DVBT_VAL_LVL_PIP]	= {0x0, 0xb7,  0, 0},
-	[DVBT_CKOUTPAR_PID]	= {0x0, 0xb9,  4, 4},
-	[DVBT_CKOUT_PWR_PID]	= {0x0, 0xb9,  3, 3},
-	[DVBT_SYNC_LVL_PID]	= {0x0, 0xb9,  2, 2},
-	[DVBT_ERR_LVL_PID]	= {0x0, 0xb9,  1, 1},
-	[DVBT_VAL_LVL_PID]	= {0x0, 0xb9,  0, 0},
-	[DVBT_SM_PASS]		= {0x1, 0x93, 11, 0},
-	[DVBT_AD7_SETTING]	= {0x0, 0x11, 15, 0},
-	[DVBT_RSSI_R]		= {0x3, 0x1,   6, 0},
-	[DVBT_ACI_DET_IND]	= {0x3, 0x12,  0, 0},
-	[DVBT_REG_MON]		= {0x0, 0xd,   1, 0},
-	[DVBT_REG_MONSEL]	= {0x0, 0xd,   2, 2},
-	[DVBT_REG_GPE]		= {0x0, 0xd,   7, 7},
-	[DVBT_REG_GPO]		= {0x0, 0x10,  0, 0},
-	[DVBT_REG_4MSEL]	= {0x0, 0x13,  0, 0},
-};
-
-/* write multiple hardware registers */
-static int rtl2832_wr(struct rtl2832_priv *priv, u8 reg, u8 *val, int len)
-{
-	int ret;
-	u8 buf[1+len];
-	struct i2c_msg msg[1] = {
-		{
-			.addr = priv->cfg.i2c_addr,
-			.flags = 0,
-			.len = 1+len,
-			.buf = buf,
-		}
-	};
-
-	buf[0] = reg;
-	memcpy(&buf[1], val, len);
-
-	ret = i2c_transfer(priv->i2c, msg, 1);
-	if (ret == 1) {
-		ret = 0;
-	} else {
-		warn("i2c wr failed=%d reg=%02x len=%d", ret, reg, len);
-		ret = -EREMOTEIO;
-	}
-	return ret;
-}
-
-/* read multiple hardware registers */
-static int rtl2832_rd(struct rtl2832_priv *priv, u8 reg, u8 *val, int len)
-{
-	int ret;
-	struct i2c_msg msg[2] = {
-		{
-			.addr = priv->cfg.i2c_addr,
-			.flags = 0,
-			.len = 1,
-			.buf = &reg,
-		}, {
-			.addr = priv->cfg.i2c_addr,
-			.flags = I2C_M_RD,
-			.len = len,
-			.buf = val,
-		}
-	};
-
-	ret = i2c_transfer(priv->i2c, msg, 2);
-	if (ret == 2) {
-		ret = 0;
-	} else {
-		warn("i2c rd failed=%d reg=%02x len=%d", ret, reg, len);
-		ret = -EREMOTEIO;
-}
-return ret;
-}
-
-/* write multiple registers */
-static int rtl2832_wr_regs(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val,
-	int len)
-{
-	int ret;
-
-
-	/* switch bank if needed */
-	if (page != priv->page) {
-		ret = rtl2832_wr(priv, 0x00, &page, 1);
-		if (ret)
-			return ret;
-
-		priv->page = page;
-}
-
-return rtl2832_wr(priv, reg, val, len);
-}
-
-/* read multiple registers */
-static int rtl2832_rd_regs(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val,
-	int len)
-{
-	int ret;
-
-	/* switch bank if needed */
-	if (page != priv->page) {
-		ret = rtl2832_wr(priv, 0x00, &page, 1);
-		if (ret)
-			return ret;
-
-		priv->page = page;
-	}
-
-	return rtl2832_rd(priv, reg, val, len);
-}
-
-#if 0 /* currently not used */
-/* write single register */
-static int rtl2832_wr_reg(struct rtl2832_priv *priv, u8 reg, u8 page, u8 val)
-{
-	return rtl2832_wr_regs(priv, reg, page, &val, 1);
-}
-#endif
-
-/* read single register */
-static int rtl2832_rd_reg(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val)
-{
-	return rtl2832_rd_regs(priv, reg, page, val, 1);
-}
-
-int rtl2832_rd_demod_reg(struct rtl2832_priv *priv, int reg, u32 *val)
-{
-	int ret;
-
-	u8 reg_start_addr;
-	u8 msb, lsb;
-	u8 page;
-	u8 reading[4];
-	u32 reading_tmp;
-	int i;
-
-	u8 len;
-	u32 mask;
-
-	reg_start_addr = registers[reg].start_address;
-	msb = registers[reg].msb;
-	lsb = registers[reg].lsb;
-	page = registers[reg].page;
-
-	len = (msb >> 3) + 1;
-	mask = REG_MASK(msb - lsb);
-
-	ret = rtl2832_rd_regs(priv, reg_start_addr, page, &reading[0], len);
-	if (ret)
-		goto err;
-
-	reading_tmp = 0;
-	for (i = 0; i < len; i++)
-		reading_tmp |= reading[i] << ((len - 1 - i) * 8);
-
-	*val = (reading_tmp >> lsb) & mask;
-
-	return ret;
-
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-
-}
-
-int rtl2832_wr_demod_reg(struct rtl2832_priv *priv, int reg, u32 val)
-{
-	int ret, i;
-	u8 len;
-	u8 reg_start_addr;
-	u8 msb, lsb;
-	u8 page;
-	u32 mask;
-
-
-	u8 reading[4];
-	u8 writing[4];
-	u32 reading_tmp;
-	u32 writing_tmp;
-
-
-	reg_start_addr = registers[reg].start_address;
-	msb = registers[reg].msb;
-	lsb = registers[reg].lsb;
-	page = registers[reg].page;
-
-	len = (msb >> 3) + 1;
-	mask = REG_MASK(msb - lsb);
-
-
-	ret = rtl2832_rd_regs(priv, reg_start_addr, page, &reading[0], len);
-	if (ret)
-		goto err;
-
-	reading_tmp = 0;
-	for (i = 0; i < len; i++)
-		reading_tmp |= reading[i] << ((len - 1 - i) * 8);
-
-	writing_tmp = reading_tmp & ~(mask << lsb);
-	writing_tmp |= ((val & mask) << lsb);
-
-
-	for (i = 0; i < len; i++)
-		writing[i] = (writing_tmp >> ((len - 1 - i) * 8)) & 0xff;
-
-	ret = rtl2832_wr_regs(priv, reg_start_addr, page, &writing[0], len);
-	if (ret)
-		goto err;
-
-	return ret;
-
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-
-}
-
-
-static int rtl2832_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	int ret;
-	struct rtl2832_priv *priv = fe->demodulator_priv;
-
-	dbg("%s: enable=%d", __func__, enable);
-
-	/* gate already open or close */
-	if (priv->i2c_gate_state == enable)
-		return 0;
-
-	ret = rtl2832_wr_demod_reg(priv, DVBT_IIC_REPEAT, (enable ? 0x1 : 0x0));
-	if (ret)
-		goto err;
-
-	priv->i2c_gate_state = enable;
-
-	return ret;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-
-
-static int rtl2832_init(struct dvb_frontend *fe)
-{
-	struct rtl2832_priv *priv = fe->demodulator_priv;
-	int i, ret;
-
-	u8 en_bbin;
-	u64 pset_iffreq;
-
-	/* initialization values for the demodulator registers */
-	struct rtl2832_reg_value rtl2832_initial_regs[] = {
-		{DVBT_AD_EN_REG,		0x1},
-		{DVBT_AD_EN_REG1,		0x1},
-		{DVBT_RSD_BER_FAIL_VAL,		0x2800},
-		{DVBT_MGD_THD0,			0x10},
-		{DVBT_MGD_THD1,			0x20},
-		{DVBT_MGD_THD2,			0x20},
-		{DVBT_MGD_THD3,			0x40},
-		{DVBT_MGD_THD4,			0x22},
-		{DVBT_MGD_THD5,			0x32},
-		{DVBT_MGD_THD6,			0x37},
-		{DVBT_MGD_THD7,			0x39},
-		{DVBT_EN_BK_TRK,		0x0},
-		{DVBT_EN_CACQ_NOTCH,		0x0},
-		{DVBT_AD_AV_REF,		0x2a},
-		{DVBT_REG_PI,			0x6},
-		{DVBT_PIP_ON,			0x0},
-		{DVBT_CDIV_PH0,			0x8},
-		{DVBT_CDIV_PH1,			0x8},
-		{DVBT_SCALE1_B92,		0x4},
-		{DVBT_SCALE1_B93,		0xb0},
-		{DVBT_SCALE1_BA7,		0x78},
-		{DVBT_SCALE1_BA9,		0x28},
-		{DVBT_SCALE1_BAA,		0x59},
-		{DVBT_SCALE1_BAB,		0x83},
-		{DVBT_SCALE1_BAC,		0xd4},
-		{DVBT_SCALE1_BB0,		0x65},
-		{DVBT_SCALE1_BB1,		0x43},
-		{DVBT_KB_P1,			0x1},
-		{DVBT_KB_P2,			0x4},
-		{DVBT_KB_P3,			0x7},
-		{DVBT_K1_CR_STEP12,		0xa},
-		{DVBT_REG_GPE,			0x1},
-		{DVBT_SERIAL,			0x0},
-		{DVBT_CDIV_PH0,			0x9},
-		{DVBT_CDIV_PH1,			0x9},
-		{DVBT_MPEG_IO_OPT_2_2,		0x0},
-		{DVBT_MPEG_IO_OPT_1_0,		0x0},
-		{DVBT_TRK_KS_P2,		0x4},
-		{DVBT_TRK_KS_I2,		0x7},
-		{DVBT_TR_THD_SET2,		0x6},
-		{DVBT_TRK_KC_I2,		0x5},
-		{DVBT_CR_THD_SET2,		0x1},
-		{DVBT_SPEC_INV,			0x0},
-		{DVBT_DAGC_TRG_VAL,		0x5a},
-		{DVBT_AGC_TARG_VAL_0,		0x0},
-		{DVBT_AGC_TARG_VAL_8_1,		0x5a},
-		{DVBT_AAGC_LOOP_GAIN,		0x16},
-		{DVBT_LOOP_GAIN2_3_0,		0x6},
-		{DVBT_LOOP_GAIN2_4,		0x1},
-		{DVBT_LOOP_GAIN3,		0x16},
-		{DVBT_VTOP1,			0x35},
-		{DVBT_VTOP2,			0x21},
-		{DVBT_VTOP3,			0x21},
-		{DVBT_KRF1,			0x0},
-		{DVBT_KRF2,			0x40},
-		{DVBT_KRF3,			0x10},
-		{DVBT_KRF4,			0x10},
-		{DVBT_IF_AGC_MIN,		0x80},
-		{DVBT_IF_AGC_MAX,		0x7f},
-		{DVBT_RF_AGC_MIN,		0x80},
-		{DVBT_RF_AGC_MAX,		0x7f},
-		{DVBT_POLAR_RF_AGC,		0x0},
-		{DVBT_POLAR_IF_AGC,		0x0},
-		{DVBT_AD7_SETTING,		0xe9bf},
-		{DVBT_EN_GI_PGA,		0x0},
-		{DVBT_THD_LOCK_UP,		0x0},
-		{DVBT_THD_LOCK_DW,		0x0},
-		{DVBT_THD_UP1,			0x11},
-		{DVBT_THD_DW1,			0xef},
-		{DVBT_INTER_CNT_LEN,		0xc},
-		{DVBT_GI_PGA_STATE,		0x0},
-		{DVBT_EN_AGC_PGA,		0x1},
-		{DVBT_IF_AGC_MAN,		0x0},
-	};
-
-
-	dbg("%s", __func__);
-
-	en_bbin = (priv->cfg.if_dvbt == 0 ? 0x1 : 0x0);
-
-	/*
-	* PSET_IFFREQ = - floor((IfFreqHz % CrystalFreqHz) * pow(2, 22)
-	*		/ CrystalFreqHz)
-	*/
-	pset_iffreq = priv->cfg.if_dvbt % priv->cfg.xtal;
-	pset_iffreq *= 0x400000;
-	pset_iffreq = div_u64(pset_iffreq, priv->cfg.xtal);
-	pset_iffreq = pset_iffreq & 0x3fffff;
-
-
-
-	for (i = 0; i < ARRAY_SIZE(rtl2832_initial_regs); i++) {
-		ret = rtl2832_wr_demod_reg(priv, rtl2832_initial_regs[i].reg,
-			rtl2832_initial_regs[i].value);
-		if (ret)
-			goto err;
-	}
-
-	/* if frequency settings */
-	ret = rtl2832_wr_demod_reg(priv, DVBT_EN_BBIN, en_bbin);
-		if (ret)
-			goto err;
-
-	ret = rtl2832_wr_demod_reg(priv, DVBT_PSET_IFFREQ, pset_iffreq);
-		if (ret)
-			goto err;
-
-	priv->sleeping = false;
-
-	return ret;
-
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int rtl2832_sleep(struct dvb_frontend *fe)
-{
-	struct rtl2832_priv *priv = fe->demodulator_priv;
-
-	dbg("%s", __func__);
-	priv->sleeping = true;
-	return 0;
-}
-
-int rtl2832_get_tune_settings(struct dvb_frontend *fe,
-	struct dvb_frontend_tune_settings *s)
-{
-	dbg("%s", __func__);
-	s->min_delay_ms = 1000;
-	s->step_size = fe->ops.info.frequency_stepsize * 2;
-	s->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1;
-	return 0;
-}
-
-static int rtl2832_set_frontend(struct dvb_frontend *fe)
-{
-	struct rtl2832_priv *priv = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	int ret, i, j;
-	u64 bw_mode, num, num2;
-	u32 resamp_ratio, cfreq_off_ratio;
-
-
-	static u8 bw_params[3][32] = {
-	/* 6 MHz bandwidth */
-		{
-		0xf5, 0xff, 0x15, 0x38, 0x5d, 0x6d, 0x52, 0x07, 0xfa, 0x2f,
-		0x53, 0xf5, 0x3f, 0xca, 0x0b, 0x91, 0xea, 0x30, 0x63, 0xb2,
-		0x13, 0xda, 0x0b, 0xc4, 0x18, 0x7e, 0x16, 0x66, 0x08, 0x67,
-		0x19, 0xe0,
-		},
-
-	/*  7 MHz bandwidth */
-		{
-		0xe7, 0xcc, 0xb5, 0xba, 0xe8, 0x2f, 0x67, 0x61, 0x00, 0xaf,
-		0x86, 0xf2, 0xbf, 0x59, 0x04, 0x11, 0xb6, 0x33, 0xa4, 0x30,
-		0x15, 0x10, 0x0a, 0x42, 0x18, 0xf8, 0x17, 0xd9, 0x07, 0x22,
-		0x19, 0x10,
-		},
-
-	/*  8 MHz bandwidth */
-		{
-		0x09, 0xf6, 0xd2, 0xa7, 0x9a, 0xc9, 0x27, 0x77, 0x06, 0xbf,
-		0xec, 0xf4, 0x4f, 0x0b, 0xfc, 0x01, 0x63, 0x35, 0x54, 0xa7,
-		0x16, 0x66, 0x08, 0xb4, 0x19, 0x6e, 0x19, 0x65, 0x05, 0xc8,
-		0x19, 0xe0,
-		},
-	};
-
-
-	dbg("%s: frequency=%d bandwidth_hz=%d inversion=%d", __func__,
-		c->frequency, c->bandwidth_hz, c->inversion);
-
-
-	/* program tuner */
-	if (fe->ops.tuner_ops.set_params)
-		fe->ops.tuner_ops.set_params(fe);
-
-
-	switch (c->bandwidth_hz) {
-	case 6000000:
-		i = 0;
-		bw_mode = 48000000;
-		break;
-	case 7000000:
-		i = 1;
-		bw_mode = 56000000;
-		break;
-	case 8000000:
-		i = 2;
-		bw_mode = 64000000;
-		break;
-	default:
-		dbg("invalid bandwidth");
-		return -EINVAL;
-	}
-
-	for (j = 0; j < sizeof(bw_params[0]); j++) {
-		ret = rtl2832_wr_regs(priv, 0x1c+j, 1, &bw_params[i][j], 1);
-		if (ret)
-			goto err;
-	}
-
-	/* calculate and set resample ratio
-	* RSAMP_RATIO = floor(CrystalFreqHz * 7 * pow(2, 22)
-	*	/ ConstWithBandwidthMode)
-	*/
-	num = priv->cfg.xtal * 7;
-	num *= 0x400000;
-	num = div_u64(num, bw_mode);
-	resamp_ratio =  num & 0x3ffffff;
-	ret = rtl2832_wr_demod_reg(priv, DVBT_RSAMP_RATIO, resamp_ratio);
-	if (ret)
-		goto err;
-
-	/* calculate and set cfreq off ratio
-	* CFREQ_OFF_RATIO = - floor(ConstWithBandwidthMode * pow(2, 20)
-	*	/ (CrystalFreqHz * 7))
-	*/
-	num = bw_mode << 20;
-	num2 = priv->cfg.xtal * 7;
-	num = div_u64(num, num2);
-	num = -num;
-	cfreq_off_ratio = num & 0xfffff;
-	ret = rtl2832_wr_demod_reg(priv, DVBT_CFREQ_OFF_RATIO, cfreq_off_ratio);
-	if (ret)
-		goto err;
-
-
-	/* soft reset */
-	ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x1);
-	if (ret)
-		goto err;
-
-	ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x0);
-	if (ret)
-		goto err;
-
-	return ret;
-err:
-	info("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int rtl2832_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct rtl2832_priv *priv = fe->demodulator_priv;
-	int ret;
-	u32 tmp;
-	*status = 0;
-
-
-	dbg("%s", __func__);
-	if (priv->sleeping)
-		return 0;
-
-	ret = rtl2832_rd_demod_reg(priv, DVBT_FSM_STAGE, &tmp);
-	if (ret)
-		goto err;
-
-	if (tmp == 11) {
-		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
-				FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
-	}
-	/* TODO find out if this is also true for rtl2832? */
-	/*else if (tmp == 10) {
-		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
-				FE_HAS_VITERBI;
-	}*/
-
-	return ret;
-err:
-	info("%s: failed=%d", __func__, ret);
-	return ret;
-}
-
-static int rtl2832_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	*snr = 0;
-	return 0;
-}
-
-static int rtl2832_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	*ber = 0;
-	return 0;
-}
-
-static int rtl2832_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	*ucblocks = 0;
-	return 0;
-}
-
-
-static int rtl2832_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	*strength = 0;
-	return 0;
-}
-
-static struct dvb_frontend_ops rtl2832_ops;
-
-static void rtl2832_release(struct dvb_frontend *fe)
-{
-	struct rtl2832_priv *priv = fe->demodulator_priv;
-
-	dbg("%s", __func__);
-	kfree(priv);
-}
-
-struct dvb_frontend *rtl2832_attach(const struct rtl2832_config *cfg,
-	struct i2c_adapter *i2c)
-{
-	struct rtl2832_priv *priv = NULL;
-	int ret = 0;
-	u8 tmp;
-
-	dbg("%s", __func__);
-
-	/* allocate memory for the internal state */
-	priv = kzalloc(sizeof(struct rtl2832_priv), GFP_KERNEL);
-	if (priv == NULL)
-		goto err;
-
-	/* setup the priv */
-	priv->i2c = i2c;
-	priv->tuner = cfg->tuner;
-	memcpy(&priv->cfg, cfg, sizeof(struct rtl2832_config));
-
-	/* check if the demod is there */
-	ret = rtl2832_rd_reg(priv, 0x00, 0x0, &tmp);
-	if (ret)
-		goto err;
-
-	/* create dvb_frontend */
-	memcpy(&priv->fe.ops, &rtl2832_ops, sizeof(struct dvb_frontend_ops));
-	priv->fe.demodulator_priv = priv;
-
-	/* TODO implement sleep mode */
-	priv->sleeping = true;
-
-	return &priv->fe;
-err:
-	dbg("%s: failed=%d", __func__, ret);
-	kfree(priv);
-	return NULL;
-}
-EXPORT_SYMBOL(rtl2832_attach);
-
-static struct dvb_frontend_ops rtl2832_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name = "Realtek RTL2832 (DVB-T)",
-		.frequency_min	  = 174000000,
-		.frequency_max	  = 862000000,
-		.frequency_stepsize = 166667,
-		.caps = FE_CAN_FEC_1_2 |
-			FE_CAN_FEC_2_3 |
-			FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 |
-			FE_CAN_FEC_7_8 |
-			FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK |
-			FE_CAN_QAM_16 |
-			FE_CAN_QAM_64 |
-			FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO |
-			FE_CAN_GUARD_INTERVAL_AUTO |
-			FE_CAN_HIERARCHY_AUTO |
-			FE_CAN_RECOVER |
-			FE_CAN_MUTE_TS
-	 },
-
-	.release = rtl2832_release,
-
-	.init = rtl2832_init,
-	.sleep = rtl2832_sleep,
-
-	.get_tune_settings = rtl2832_get_tune_settings,
-
-	.set_frontend = rtl2832_set_frontend,
-
-	.read_status = rtl2832_read_status,
-	.read_snr = rtl2832_read_snr,
-	.read_ber = rtl2832_read_ber,
-	.read_ucblocks = rtl2832_read_ucblocks,
-	.read_signal_strength = rtl2832_read_signal_strength,
-	.i2c_gate_ctrl = rtl2832_i2c_gate_ctrl,
-};
-
-MODULE_AUTHOR("Thomas Mair <mair.thomas86@gmail.com>");
-MODULE_DESCRIPTION("Realtek RTL2832 DVB-T demodulator driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("0.5");
diff --git a/drivers/media/dvb/frontends/rtl2832.h b/drivers/media/dvb/frontends/rtl2832.h
deleted file mode 100644
index d94dc9a..0000000
--- a/drivers/media/dvb/frontends/rtl2832.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Realtek RTL2832 DVB-T demodulator driver
- *
- * Copyright (C) 2012 Thomas Mair <thomas.mair86@gmail.com>
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License along
- *	with this program; if not, write to the Free Software Foundation, Inc.,
- *	51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef RTL2832_H
-#define RTL2832_H
-
-#include <linux/dvb/frontend.h>
-
-struct rtl2832_config {
-	/*
-	 * Demodulator I2C address.
-	 */
-	u8 i2c_addr;
-
-	/*
-	 * Xtal frequency.
-	 * Hz
-	 * 4000000, 16000000, 25000000, 28800000
-	 */
-	u32 xtal;
-
-	/*
-	 * IFs for all used modes.
-	 * Hz
-	 * 4570000, 4571429, 36000000, 36125000, 36166667, 44000000
-	 */
-	u32 if_dvbt;
-
-	/*
-	 */
-	u8 tuner;
-};
-
-
-#if defined(CONFIG_DVB_RTL2832) || \
-	(defined(CONFIG_DVB_RTL2832_MODULE) && defined(MODULE))
-extern struct dvb_frontend *rtl2832_attach(
-	const struct rtl2832_config *cfg,
-	struct i2c_adapter *i2c
-);
-
-extern struct i2c_adapter *rtl2832_get_tuner_i2c_adapter(
-	struct dvb_frontend *fe
-);
-#else
-static inline struct dvb_frontend *rtl2832_attach(
-	const struct rtl2832_config *config,
-	struct i2c_adapter *i2c
-)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-
-#endif /* RTL2832_H */
diff --git a/drivers/media/dvb/frontends/rtl2832_priv.h b/drivers/media/dvb/frontends/rtl2832_priv.h
deleted file mode 100644
index 0ce9502..0000000
--- a/drivers/media/dvb/frontends/rtl2832_priv.h
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * Realtek RTL2832 DVB-T demodulator driver
- *
- * Copyright (C) 2012 Thomas Mair <thomas.mair86@gmail.com>
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License along
- *	with this program; if not, write to the Free Software Foundation, Inc.,
- *	51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef RTL2832_PRIV_H
-#define RTL2832_PRIV_H
-
-#include "dvb_frontend.h"
-#include "rtl2832.h"
-
-#define LOG_PREFIX "rtl2832"
-
-#undef dbg
-#define dbg(f, arg...) \
-do { \
-	if (rtl2832_debug)  \
-		printk(KERN_INFO     LOG_PREFIX": " f "\n" , ## arg); \
-} while (0)
-#undef err
-#define err(f, arg...)  printk(KERN_ERR     LOG_PREFIX": " f "\n" , ## arg)
-#undef info
-#define info(f, arg...) printk(KERN_INFO    LOG_PREFIX": " f "\n" , ## arg)
-#undef warn
-#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg)
-
-struct rtl2832_priv {
-	struct i2c_adapter *i2c;
-	struct dvb_frontend fe;
-	struct rtl2832_config cfg;
-
-	bool i2c_gate_state;
-	bool sleeping;
-
-	u8 tuner;
-	u8 page; /* active register page */
-};
-
-struct rtl2832_reg_entry {
-	u8 page;
-	u8 start_address;
-	u8 msb;
-	u8 lsb;
-};
-
-struct rtl2832_reg_value {
-	int reg;
-	u32 value;
-};
-
-
-/* Demod register bit names */
-enum DVBT_REG_BIT_NAME {
-	DVBT_SOFT_RST,
-	DVBT_IIC_REPEAT,
-	DVBT_TR_WAIT_MIN_8K,
-	DVBT_RSD_BER_FAIL_VAL,
-	DVBT_EN_BK_TRK,
-	DVBT_REG_PI,
-	DVBT_REG_PFREQ_1_0,
-	DVBT_PD_DA8,
-	DVBT_LOCK_TH,
-	DVBT_BER_PASS_SCAL,
-	DVBT_CE_FFSM_BYPASS,
-	DVBT_ALPHAIIR_N,
-	DVBT_ALPHAIIR_DIF,
-	DVBT_EN_TRK_SPAN,
-	DVBT_LOCK_TH_LEN,
-	DVBT_CCI_THRE,
-	DVBT_CCI_MON_SCAL,
-	DVBT_CCI_M0,
-	DVBT_CCI_M1,
-	DVBT_CCI_M2,
-	DVBT_CCI_M3,
-	DVBT_SPEC_INIT_0,
-	DVBT_SPEC_INIT_1,
-	DVBT_SPEC_INIT_2,
-	DVBT_AD_EN_REG,
-	DVBT_AD_EN_REG1,
-	DVBT_EN_BBIN,
-	DVBT_MGD_THD0,
-	DVBT_MGD_THD1,
-	DVBT_MGD_THD2,
-	DVBT_MGD_THD3,
-	DVBT_MGD_THD4,
-	DVBT_MGD_THD5,
-	DVBT_MGD_THD6,
-	DVBT_MGD_THD7,
-	DVBT_EN_CACQ_NOTCH,
-	DVBT_AD_AV_REF,
-	DVBT_PIP_ON,
-	DVBT_SCALE1_B92,
-	DVBT_SCALE1_B93,
-	DVBT_SCALE1_BA7,
-	DVBT_SCALE1_BA9,
-	DVBT_SCALE1_BAA,
-	DVBT_SCALE1_BAB,
-	DVBT_SCALE1_BAC,
-	DVBT_SCALE1_BB0,
-	DVBT_SCALE1_BB1,
-	DVBT_KB_P1,
-	DVBT_KB_P2,
-	DVBT_KB_P3,
-	DVBT_OPT_ADC_IQ,
-	DVBT_AD_AVI,
-	DVBT_AD_AVQ,
-	DVBT_K1_CR_STEP12,
-	DVBT_TRK_KS_P2,
-	DVBT_TRK_KS_I2,
-	DVBT_TR_THD_SET2,
-	DVBT_TRK_KC_P2,
-	DVBT_TRK_KC_I2,
-	DVBT_CR_THD_SET2,
-	DVBT_PSET_IFFREQ,
-	DVBT_SPEC_INV,
-	DVBT_BW_INDEX,
-	DVBT_RSAMP_RATIO,
-	DVBT_CFREQ_OFF_RATIO,
-	DVBT_FSM_STAGE,
-	DVBT_RX_CONSTEL,
-	DVBT_RX_HIER,
-	DVBT_RX_C_RATE_LP,
-	DVBT_RX_C_RATE_HP,
-	DVBT_GI_IDX,
-	DVBT_FFT_MODE_IDX,
-	DVBT_RSD_BER_EST,
-	DVBT_CE_EST_EVM,
-	DVBT_RF_AGC_VAL,
-	DVBT_IF_AGC_VAL,
-	DVBT_DAGC_VAL,
-	DVBT_SFREQ_OFF,
-	DVBT_CFREQ_OFF,
-	DVBT_POLAR_RF_AGC,
-	DVBT_POLAR_IF_AGC,
-	DVBT_AAGC_HOLD,
-	DVBT_EN_RF_AGC,
-	DVBT_EN_IF_AGC,
-	DVBT_IF_AGC_MIN,
-	DVBT_IF_AGC_MAX,
-	DVBT_RF_AGC_MIN,
-	DVBT_RF_AGC_MAX,
-	DVBT_IF_AGC_MAN,
-	DVBT_IF_AGC_MAN_VAL,
-	DVBT_RF_AGC_MAN,
-	DVBT_RF_AGC_MAN_VAL,
-	DVBT_DAGC_TRG_VAL,
-	DVBT_AGC_TARG_VAL,
-	DVBT_LOOP_GAIN_3_0,
-	DVBT_LOOP_GAIN_4,
-	DVBT_VTOP,
-	DVBT_KRF,
-	DVBT_AGC_TARG_VAL_0,
-	DVBT_AGC_TARG_VAL_8_1,
-	DVBT_AAGC_LOOP_GAIN,
-	DVBT_LOOP_GAIN2_3_0,
-	DVBT_LOOP_GAIN2_4,
-	DVBT_LOOP_GAIN3,
-	DVBT_VTOP1,
-	DVBT_VTOP2,
-	DVBT_VTOP3,
-	DVBT_KRF1,
-	DVBT_KRF2,
-	DVBT_KRF3,
-	DVBT_KRF4,
-	DVBT_EN_GI_PGA,
-	DVBT_THD_LOCK_UP,
-	DVBT_THD_LOCK_DW,
-	DVBT_THD_UP1,
-	DVBT_THD_DW1,
-	DVBT_INTER_CNT_LEN,
-	DVBT_GI_PGA_STATE,
-	DVBT_EN_AGC_PGA,
-	DVBT_CKOUTPAR,
-	DVBT_CKOUT_PWR,
-	DVBT_SYNC_DUR,
-	DVBT_ERR_DUR,
-	DVBT_SYNC_LVL,
-	DVBT_ERR_LVL,
-	DVBT_VAL_LVL,
-	DVBT_SERIAL,
-	DVBT_SER_LSB,
-	DVBT_CDIV_PH0,
-	DVBT_CDIV_PH1,
-	DVBT_MPEG_IO_OPT_2_2,
-	DVBT_MPEG_IO_OPT_1_0,
-	DVBT_CKOUTPAR_PIP,
-	DVBT_CKOUT_PWR_PIP,
-	DVBT_SYNC_LVL_PIP,
-	DVBT_ERR_LVL_PIP,
-	DVBT_VAL_LVL_PIP,
-	DVBT_CKOUTPAR_PID,
-	DVBT_CKOUT_PWR_PID,
-	DVBT_SYNC_LVL_PID,
-	DVBT_ERR_LVL_PID,
-	DVBT_VAL_LVL_PID,
-	DVBT_SM_PASS,
-	DVBT_UPDATE_REG_2,
-	DVBT_BTHD_P3,
-	DVBT_BTHD_D3,
-	DVBT_FUNC4_REG0,
-	DVBT_FUNC4_REG1,
-	DVBT_FUNC4_REG2,
-	DVBT_FUNC4_REG3,
-	DVBT_FUNC4_REG4,
-	DVBT_FUNC4_REG5,
-	DVBT_FUNC4_REG6,
-	DVBT_FUNC4_REG7,
-	DVBT_FUNC4_REG8,
-	DVBT_FUNC4_REG9,
-	DVBT_FUNC4_REG10,
-	DVBT_FUNC5_REG0,
-	DVBT_FUNC5_REG1,
-	DVBT_FUNC5_REG2,
-	DVBT_FUNC5_REG3,
-	DVBT_FUNC5_REG4,
-	DVBT_FUNC5_REG5,
-	DVBT_FUNC5_REG6,
-	DVBT_FUNC5_REG7,
-	DVBT_FUNC5_REG8,
-	DVBT_FUNC5_REG9,
-	DVBT_FUNC5_REG10,
-	DVBT_FUNC5_REG11,
-	DVBT_FUNC5_REG12,
-	DVBT_FUNC5_REG13,
-	DVBT_FUNC5_REG14,
-	DVBT_FUNC5_REG15,
-	DVBT_FUNC5_REG16,
-	DVBT_FUNC5_REG17,
-	DVBT_FUNC5_REG18,
-	DVBT_AD7_SETTING,
-	DVBT_RSSI_R,
-	DVBT_ACI_DET_IND,
-	DVBT_REG_MON,
-	DVBT_REG_MONSEL,
-	DVBT_REG_GPE,
-	DVBT_REG_GPO,
-	DVBT_REG_4MSEL,
-	DVBT_TEST_REG_1,
-	DVBT_TEST_REG_2,
-	DVBT_TEST_REG_3,
-	DVBT_TEST_REG_4,
-	DVBT_REG_BIT_NAME_ITEM_TERMINATOR,
-};
-
-#endif /* RTL2832_PRIV_H */
diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c
deleted file mode 100644
index f71b062..0000000
--- a/drivers/media/dvb/frontends/s5h1409.c
+++ /dev/null
@@ -1,1029 +0,0 @@
-/*
-    Samsung S5H1409 VSB/QAM demodulator driver
-
-    Copyright (C) 2006 Steven Toth <stoth@linuxtv.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include "dvb_frontend.h"
-#include "s5h1409.h"
-
-struct s5h1409_state {
-
-	struct i2c_adapter *i2c;
-
-	/* configuration settings */
-	const struct s5h1409_config *config;
-
-	struct dvb_frontend frontend;
-
-	/* previous uncorrected block counter */
-	fe_modulation_t current_modulation;
-
-	u32 current_frequency;
-	int if_freq;
-
-	u32 is_qam_locked;
-
-	/* QAM tuning state goes through the following state transitions */
-#define QAM_STATE_UNTUNED 0
-#define QAM_STATE_TUNING_STARTED 1
-#define QAM_STATE_INTERLEAVE_SET 2
-#define QAM_STATE_QAM_OPTIMIZED_L1 3
-#define QAM_STATE_QAM_OPTIMIZED_L2 4
-#define QAM_STATE_QAM_OPTIMIZED_L3 5
-	u8  qam_state;
-};
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Enable verbose debug messages");
-
-#define dprintk	if (debug) printk
-
-/* Register values to initialise the demod, this will set VSB by default */
-static struct init_tab {
-	u8	reg;
-	u16	data;
-} init_tab[] = {
-	{ 0x00, 0x0071, },
-	{ 0x01, 0x3213, },
-	{ 0x09, 0x0025, },
-	{ 0x1c, 0x001d, },
-	{ 0x1f, 0x002d, },
-	{ 0x20, 0x001d, },
-	{ 0x22, 0x0022, },
-	{ 0x23, 0x0020, },
-	{ 0x29, 0x110f, },
-	{ 0x2a, 0x10b4, },
-	{ 0x2b, 0x10ae, },
-	{ 0x2c, 0x0031, },
-	{ 0x31, 0x010d, },
-	{ 0x32, 0x0100, },
-	{ 0x44, 0x0510, },
-	{ 0x54, 0x0104, },
-	{ 0x58, 0x2222, },
-	{ 0x59, 0x1162, },
-	{ 0x5a, 0x3211, },
-	{ 0x5d, 0x0370, },
-	{ 0x5e, 0x0296, },
-	{ 0x61, 0x0010, },
-	{ 0x63, 0x4a00, },
-	{ 0x65, 0x0800, },
-	{ 0x71, 0x0003, },
-	{ 0x72, 0x0470, },
-	{ 0x81, 0x0002, },
-	{ 0x82, 0x0600, },
-	{ 0x86, 0x0002, },
-	{ 0x8a, 0x2c38, },
-	{ 0x8b, 0x2a37, },
-	{ 0x92, 0x302f, },
-	{ 0x93, 0x3332, },
-	{ 0x96, 0x000c, },
-	{ 0x99, 0x0101, },
-	{ 0x9c, 0x2e37, },
-	{ 0x9d, 0x2c37, },
-	{ 0x9e, 0x2c37, },
-	{ 0xab, 0x0100, },
-	{ 0xac, 0x1003, },
-	{ 0xad, 0x103f, },
-	{ 0xe2, 0x0100, },
-	{ 0xe3, 0x1000, },
-	{ 0x28, 0x1010, },
-	{ 0xb1, 0x000e, },
-};
-
-/* VSB SNR lookup table */
-static struct vsb_snr_tab {
-	u16	val;
-	u16	data;
-} vsb_snr_tab[] = {
-	{  924, 300, },
-	{  923, 300, },
-	{  918, 295, },
-	{  915, 290, },
-	{  911, 285, },
-	{  906, 280, },
-	{  901, 275, },
-	{  896, 270, },
-	{  891, 265, },
-	{  885, 260, },
-	{  879, 255, },
-	{  873, 250, },
-	{  864, 245, },
-	{  858, 240, },
-	{  850, 235, },
-	{  841, 230, },
-	{  832, 225, },
-	{  823, 220, },
-	{  812, 215, },
-	{  802, 210, },
-	{  788, 205, },
-	{  778, 200, },
-	{  767, 195, },
-	{  753, 190, },
-	{  740, 185, },
-	{  725, 180, },
-	{  707, 175, },
-	{  689, 170, },
-	{  671, 165, },
-	{  656, 160, },
-	{  637, 155, },
-	{  616, 150, },
-	{  542, 145, },
-	{  519, 140, },
-	{  507, 135, },
-	{  497, 130, },
-	{  492, 125, },
-	{  474, 120, },
-	{  300, 111, },
-	{    0,   0, },
-};
-
-/* QAM64 SNR lookup table */
-static struct qam64_snr_tab {
-	u16	val;
-	u16	data;
-} qam64_snr_tab[] = {
-	{    1,   0, },
-	{   12, 300, },
-	{   15, 290, },
-	{   18, 280, },
-	{   22, 270, },
-	{   23, 268, },
-	{   24, 266, },
-	{   25, 264, },
-	{   27, 262, },
-	{   28, 260, },
-	{   29, 258, },
-	{   30, 256, },
-	{   32, 254, },
-	{   33, 252, },
-	{   34, 250, },
-	{   35, 249, },
-	{   36, 248, },
-	{   37, 247, },
-	{   38, 246, },
-	{   39, 245, },
-	{   40, 244, },
-	{   41, 243, },
-	{   42, 241, },
-	{   43, 240, },
-	{   44, 239, },
-	{   45, 238, },
-	{   46, 237, },
-	{   47, 236, },
-	{   48, 235, },
-	{   49, 234, },
-	{   50, 233, },
-	{   51, 232, },
-	{   52, 231, },
-	{   53, 230, },
-	{   55, 229, },
-	{   56, 228, },
-	{   57, 227, },
-	{   58, 226, },
-	{   59, 225, },
-	{   60, 224, },
-	{   62, 223, },
-	{   63, 222, },
-	{   65, 221, },
-	{   66, 220, },
-	{   68, 219, },
-	{   69, 218, },
-	{   70, 217, },
-	{   72, 216, },
-	{   73, 215, },
-	{   75, 214, },
-	{   76, 213, },
-	{   78, 212, },
-	{   80, 211, },
-	{   81, 210, },
-	{   83, 209, },
-	{   84, 208, },
-	{   85, 207, },
-	{   87, 206, },
-	{   89, 205, },
-	{   91, 204, },
-	{   93, 203, },
-	{   95, 202, },
-	{   96, 201, },
-	{  104, 200, },
-	{  255,   0, },
-};
-
-/* QAM256 SNR lookup table */
-static struct qam256_snr_tab {
-	u16	val;
-	u16	data;
-} qam256_snr_tab[] = {
-	{    1,   0, },
-	{   12, 400, },
-	{   13, 390, },
-	{   15, 380, },
-	{   17, 360, },
-	{   19, 350, },
-	{   22, 348, },
-	{   23, 346, },
-	{   24, 344, },
-	{   25, 342, },
-	{   26, 340, },
-	{   27, 336, },
-	{   28, 334, },
-	{   29, 332, },
-	{   30, 330, },
-	{   31, 328, },
-	{   32, 326, },
-	{   33, 325, },
-	{   34, 322, },
-	{   35, 320, },
-	{   37, 318, },
-	{   39, 316, },
-	{   40, 314, },
-	{   41, 312, },
-	{   42, 310, },
-	{   43, 308, },
-	{   46, 306, },
-	{   47, 304, },
-	{   49, 302, },
-	{   51, 300, },
-	{   53, 298, },
-	{   54, 297, },
-	{   55, 296, },
-	{   56, 295, },
-	{   57, 294, },
-	{   59, 293, },
-	{   60, 292, },
-	{   61, 291, },
-	{   63, 290, },
-	{   64, 289, },
-	{   65, 288, },
-	{   66, 287, },
-	{   68, 286, },
-	{   69, 285, },
-	{   71, 284, },
-	{   72, 283, },
-	{   74, 282, },
-	{   75, 281, },
-	{   76, 280, },
-	{   77, 279, },
-	{   78, 278, },
-	{   81, 277, },
-	{   83, 276, },
-	{   84, 275, },
-	{   86, 274, },
-	{   87, 273, },
-	{   89, 272, },
-	{   90, 271, },
-	{   92, 270, },
-	{   93, 269, },
-	{   95, 268, },
-	{   96, 267, },
-	{   98, 266, },
-	{  100, 265, },
-	{  102, 264, },
-	{  104, 263, },
-	{  105, 262, },
-	{  106, 261, },
-	{  110, 260, },
-	{  255,   0, },
-};
-
-/* 8 bit registers, 16 bit values */
-static int s5h1409_writereg(struct s5h1409_state *state, u8 reg, u16 data)
-{
-	int ret;
-	u8 buf[] = { reg, data >> 8,  data & 0xff };
-
-	struct i2c_msg msg = { .addr = state->config->demod_address,
-			       .flags = 0, .buf = buf, .len = 3 };
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-
-	if (ret != 1)
-		printk(KERN_ERR "%s: error (reg == 0x%02x, val == 0x%04x, "
-		       "ret == %i)\n", __func__, reg, data, ret);
-
-	return (ret != 1) ? -1 : 0;
-}
-
-static u16 s5h1409_readreg(struct s5h1409_state *state, u8 reg)
-{
-	int ret;
-	u8 b0[] = { reg };
-	u8 b1[] = { 0, 0 };
-
-	struct i2c_msg msg[] = {
-		{ .addr = state->config->demod_address, .flags = 0,
-		  .buf = b0, .len = 1 },
-		{ .addr = state->config->demod_address, .flags = I2C_M_RD,
-		  .buf = b1, .len = 2 } };
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2)
-		printk("%s: readreg error (ret == %i)\n", __func__, ret);
-	return (b1[0] << 8) | b1[1];
-}
-
-static int s5h1409_softreset(struct dvb_frontend *fe)
-{
-	struct s5h1409_state *state = fe->demodulator_priv;
-
-	dprintk("%s()\n", __func__);
-
-	s5h1409_writereg(state, 0xf5, 0);
-	s5h1409_writereg(state, 0xf5, 1);
-	state->is_qam_locked = 0;
-	state->qam_state = QAM_STATE_UNTUNED;
-	return 0;
-}
-
-#define S5H1409_VSB_IF_FREQ 5380
-#define S5H1409_QAM_IF_FREQ (state->config->qam_if)
-
-static int s5h1409_set_if_freq(struct dvb_frontend *fe, int KHz)
-{
-	struct s5h1409_state *state = fe->demodulator_priv;
-
-	dprintk("%s(%d KHz)\n", __func__, KHz);
-
-	switch (KHz) {
-	case 4000:
-		s5h1409_writereg(state, 0x87, 0x014b);
-		s5h1409_writereg(state, 0x88, 0x0cb5);
-		s5h1409_writereg(state, 0x89, 0x03e2);
-		break;
-	case 5380:
-	case 44000:
-	default:
-		s5h1409_writereg(state, 0x87, 0x01be);
-		s5h1409_writereg(state, 0x88, 0x0436);
-		s5h1409_writereg(state, 0x89, 0x054d);
-		break;
-	}
-	state->if_freq = KHz;
-
-	return 0;
-}
-
-static int s5h1409_set_spectralinversion(struct dvb_frontend *fe, int inverted)
-{
-	struct s5h1409_state *state = fe->demodulator_priv;
-
-	dprintk("%s(%d)\n", __func__, inverted);
-
-	if (inverted == 1)
-		return s5h1409_writereg(state, 0x1b, 0x1101); /* Inverted */
-	else
-		return s5h1409_writereg(state, 0x1b, 0x0110); /* Normal */
-}
-
-static int s5h1409_enable_modulation(struct dvb_frontend *fe,
-				     fe_modulation_t m)
-{
-	struct s5h1409_state *state = fe->demodulator_priv;
-
-	dprintk("%s(0x%08x)\n", __func__, m);
-
-	switch (m) {
-	case VSB_8:
-		dprintk("%s() VSB_8\n", __func__);
-		if (state->if_freq != S5H1409_VSB_IF_FREQ)
-			s5h1409_set_if_freq(fe, S5H1409_VSB_IF_FREQ);
-		s5h1409_writereg(state, 0xf4, 0);
-		break;
-	case QAM_64:
-	case QAM_256:
-	case QAM_AUTO:
-		dprintk("%s() QAM_AUTO (64/256)\n", __func__);
-		if (state->if_freq != S5H1409_QAM_IF_FREQ)
-			s5h1409_set_if_freq(fe, S5H1409_QAM_IF_FREQ);
-		s5h1409_writereg(state, 0xf4, 1);
-		s5h1409_writereg(state, 0x85, 0x110);
-		break;
-	default:
-		dprintk("%s() Invalid modulation\n", __func__);
-		return -EINVAL;
-	}
-
-	state->current_modulation = m;
-	s5h1409_softreset(fe);
-
-	return 0;
-}
-
-static int s5h1409_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct s5h1409_state *state = fe->demodulator_priv;
-
-	dprintk("%s(%d)\n", __func__, enable);
-
-	if (enable)
-		return s5h1409_writereg(state, 0xf3, 1);
-	else
-		return s5h1409_writereg(state, 0xf3, 0);
-}
-
-static int s5h1409_set_gpio(struct dvb_frontend *fe, int enable)
-{
-	struct s5h1409_state *state = fe->demodulator_priv;
-
-	dprintk("%s(%d)\n", __func__, enable);
-
-	if (enable)
-		return s5h1409_writereg(state, 0xe3,
-			s5h1409_readreg(state, 0xe3) | 0x1100);
-	else
-		return s5h1409_writereg(state, 0xe3,
-			s5h1409_readreg(state, 0xe3) & 0xfeff);
-}
-
-static int s5h1409_sleep(struct dvb_frontend *fe, int enable)
-{
-	struct s5h1409_state *state = fe->demodulator_priv;
-
-	dprintk("%s(%d)\n", __func__, enable);
-
-	return s5h1409_writereg(state, 0xf2, enable);
-}
-
-static int s5h1409_register_reset(struct dvb_frontend *fe)
-{
-	struct s5h1409_state *state = fe->demodulator_priv;
-
-	dprintk("%s()\n", __func__);
-
-	return s5h1409_writereg(state, 0xfa, 0);
-}
-
-static void s5h1409_set_qam_amhum_mode(struct dvb_frontend *fe)
-{
-	struct s5h1409_state *state = fe->demodulator_priv;
-	u16 reg;
-
-	if (state->qam_state < QAM_STATE_INTERLEAVE_SET) {
-		/* We should not perform amhum optimization until
-		   the interleave mode has been configured */
-		return;
-	}
-
-	if (state->qam_state == QAM_STATE_QAM_OPTIMIZED_L3) {
-		/* We've already reached the maximum optimization level, so
-		   dont bother banging on the status registers */
-		return;
-	}
-
-	/* QAM EQ lock check */
-	reg = s5h1409_readreg(state, 0xf0);
-
-	if ((reg >> 13) & 0x1) {
-		reg &= 0xff;
-
-		s5h1409_writereg(state, 0x96, 0x000c);
-		if (reg < 0x68) {
-			if (state->qam_state < QAM_STATE_QAM_OPTIMIZED_L3) {
-				dprintk("%s() setting QAM state to OPT_L3\n",
-					__func__);
-				s5h1409_writereg(state, 0x93, 0x3130);
-				s5h1409_writereg(state, 0x9e, 0x2836);
-				state->qam_state = QAM_STATE_QAM_OPTIMIZED_L3;
-			}
-		} else {
-			if (state->qam_state < QAM_STATE_QAM_OPTIMIZED_L2) {
-				dprintk("%s() setting QAM state to OPT_L2\n",
-					__func__);
-				s5h1409_writereg(state, 0x93, 0x3332);
-				s5h1409_writereg(state, 0x9e, 0x2c37);
-				state->qam_state = QAM_STATE_QAM_OPTIMIZED_L2;
-			}
-		}
-
-	} else {
-		if (state->qam_state < QAM_STATE_QAM_OPTIMIZED_L1) {
-			dprintk("%s() setting QAM state to OPT_L1\n", __func__);
-			s5h1409_writereg(state, 0x96, 0x0008);
-			s5h1409_writereg(state, 0x93, 0x3332);
-			s5h1409_writereg(state, 0x9e, 0x2c37);
-			state->qam_state = QAM_STATE_QAM_OPTIMIZED_L1;
-		}
-	}
-}
-
-static void s5h1409_set_qam_amhum_mode_legacy(struct dvb_frontend *fe)
-{
-	struct s5h1409_state *state = fe->demodulator_priv;
-	u16 reg;
-
-	if (state->is_qam_locked)
-		return;
-
-	/* QAM EQ lock check */
-	reg = s5h1409_readreg(state, 0xf0);
-
-	if ((reg >> 13) & 0x1) {
-
-		state->is_qam_locked = 1;
-		reg &= 0xff;
-
-		s5h1409_writereg(state, 0x96, 0x00c);
-		if ((reg < 0x38) || (reg > 0x68)) {
-			s5h1409_writereg(state, 0x93, 0x3332);
-			s5h1409_writereg(state, 0x9e, 0x2c37);
-		} else {
-			s5h1409_writereg(state, 0x93, 0x3130);
-			s5h1409_writereg(state, 0x9e, 0x2836);
-		}
-
-	} else {
-		s5h1409_writereg(state, 0x96, 0x0008);
-		s5h1409_writereg(state, 0x93, 0x3332);
-		s5h1409_writereg(state, 0x9e, 0x2c37);
-	}
-}
-
-static void s5h1409_set_qam_interleave_mode(struct dvb_frontend *fe)
-{
-	struct s5h1409_state *state = fe->demodulator_priv;
-	u16 reg, reg1, reg2;
-
-	if (state->qam_state >= QAM_STATE_INTERLEAVE_SET) {
-		/* We've done the optimization already */
-		return;
-	}
-
-	reg = s5h1409_readreg(state, 0xf1);
-
-	/* Master lock */
-	if ((reg >> 15) & 0x1) {
-		if (state->qam_state == QAM_STATE_UNTUNED ||
-		    state->qam_state == QAM_STATE_TUNING_STARTED) {
-			dprintk("%s() setting QAM state to INTERLEAVE_SET\n",
-				__func__);
-			reg1 = s5h1409_readreg(state, 0xb2);
-			reg2 = s5h1409_readreg(state, 0xad);
-
-			s5h1409_writereg(state, 0x96, 0x0020);
-			s5h1409_writereg(state, 0xad,
-				(((reg1 & 0xf000) >> 4) | (reg2 & 0xf0ff)));
-			state->qam_state = QAM_STATE_INTERLEAVE_SET;
-		}
-	} else {
-		if (state->qam_state == QAM_STATE_UNTUNED) {
-			dprintk("%s() setting QAM state to TUNING_STARTED\n",
-				__func__);
-			s5h1409_writereg(state, 0x96, 0x08);
-			s5h1409_writereg(state, 0xab,
-				s5h1409_readreg(state, 0xab) | 0x1001);
-			state->qam_state = QAM_STATE_TUNING_STARTED;
-		}
-	}
-}
-
-static void s5h1409_set_qam_interleave_mode_legacy(struct dvb_frontend *fe)
-{
-	struct s5h1409_state *state = fe->demodulator_priv;
-	u16 reg, reg1, reg2;
-
-	reg = s5h1409_readreg(state, 0xf1);
-
-	/* Master lock */
-	if ((reg >> 15) & 0x1) {
-		if (state->qam_state != 2) {
-			state->qam_state = 2;
-			reg1 = s5h1409_readreg(state, 0xb2);
-			reg2 = s5h1409_readreg(state, 0xad);
-
-			s5h1409_writereg(state, 0x96, 0x20);
-			s5h1409_writereg(state, 0xad,
-				(((reg1 & 0xf000) >> 4) | (reg2 & 0xf0ff)));
-			s5h1409_writereg(state, 0xab,
-				s5h1409_readreg(state, 0xab) & 0xeffe);
-		}
-	} else {
-		if (state->qam_state != 1) {
-			state->qam_state = 1;
-			s5h1409_writereg(state, 0x96, 0x08);
-			s5h1409_writereg(state, 0xab,
-				s5h1409_readreg(state, 0xab) | 0x1001);
-		}
-	}
-}
-
-/* Talk to the demod, set the FEC, GUARD, QAM settings etc */
-static int s5h1409_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct s5h1409_state *state = fe->demodulator_priv;
-
-	dprintk("%s(frequency=%d)\n", __func__, p->frequency);
-
-	s5h1409_softreset(fe);
-
-	state->current_frequency = p->frequency;
-
-	s5h1409_enable_modulation(fe, p->modulation);
-
-	if (fe->ops.tuner_ops.set_params) {
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 1);
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	/* Issue a reset to the demod so it knows to resync against the
-	   newly tuned frequency */
-	s5h1409_softreset(fe);
-
-	/* Optimize the demod for QAM */
-	if (state->current_modulation != VSB_8) {
-		/* This almost certainly applies to all boards, but for now
-		   only do it for the HVR-1600.  Once the other boards are
-		   tested, the "legacy" versions can just go away */
-		if (state->config->hvr1600_opt == S5H1409_HVR1600_OPTIMIZE) {
-			s5h1409_set_qam_interleave_mode(fe);
-			s5h1409_set_qam_amhum_mode(fe);
-		} else {
-			s5h1409_set_qam_amhum_mode_legacy(fe);
-			s5h1409_set_qam_interleave_mode_legacy(fe);
-		}
-	}
-
-	return 0;
-}
-
-static int s5h1409_set_mpeg_timing(struct dvb_frontend *fe, int mode)
-{
-	struct s5h1409_state *state = fe->demodulator_priv;
-	u16 val;
-
-	dprintk("%s(%d)\n", __func__, mode);
-
-	val = s5h1409_readreg(state, 0xac) & 0xcfff;
-	switch (mode) {
-	case S5H1409_MPEGTIMING_CONTINOUS_INVERTING_CLOCK:
-		val |= 0x0000;
-		break;
-	case S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK:
-		dprintk("%s(%d) Mode1 or Defaulting\n", __func__, mode);
-		val |= 0x1000;
-		break;
-	case S5H1409_MPEGTIMING_NONCONTINOUS_INVERTING_CLOCK:
-		val |= 0x2000;
-		break;
-	case S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK:
-		val |= 0x3000;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/* Configure MPEG Signal Timing charactistics */
-	return s5h1409_writereg(state, 0xac, val);
-}
-
-/* Reset the demod hardware and reset all of the configuration registers
-   to a default state. */
-static int s5h1409_init(struct dvb_frontend *fe)
-{
-	int i;
-
-	struct s5h1409_state *state = fe->demodulator_priv;
-	dprintk("%s()\n", __func__);
-
-	s5h1409_sleep(fe, 0);
-	s5h1409_register_reset(fe);
-
-	for (i = 0; i < ARRAY_SIZE(init_tab); i++)
-		s5h1409_writereg(state, init_tab[i].reg, init_tab[i].data);
-
-	/* The datasheet says that after initialisation, VSB is default */
-	state->current_modulation = VSB_8;
-
-	/* Optimize for the HVR-1600 if appropriate.  Note that some of these
-	   may get folded into the generic case after testing with other
-	   devices */
-	if (state->config->hvr1600_opt == S5H1409_HVR1600_OPTIMIZE) {
-		/* VSB AGC REF */
-		s5h1409_writereg(state, 0x09, 0x0050);
-
-		/* Unknown but Windows driver does it... */
-		s5h1409_writereg(state, 0x21, 0x0001);
-		s5h1409_writereg(state, 0x50, 0x030e);
-
-		/* QAM AGC REF */
-		s5h1409_writereg(state, 0x82, 0x0800);
-	}
-
-	if (state->config->output_mode == S5H1409_SERIAL_OUTPUT)
-		s5h1409_writereg(state, 0xab,
-			s5h1409_readreg(state, 0xab) | 0x100); /* Serial */
-	else
-		s5h1409_writereg(state, 0xab,
-			s5h1409_readreg(state, 0xab) & 0xfeff); /* Parallel */
-
-	s5h1409_set_spectralinversion(fe, state->config->inversion);
-	s5h1409_set_if_freq(fe, state->if_freq);
-	s5h1409_set_gpio(fe, state->config->gpio);
-	s5h1409_set_mpeg_timing(fe, state->config->mpeg_timing);
-	s5h1409_softreset(fe);
-
-	/* Note: Leaving the I2C gate closed. */
-	s5h1409_i2c_gate_ctrl(fe, 0);
-
-	return 0;
-}
-
-static int s5h1409_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct s5h1409_state *state = fe->demodulator_priv;
-	u16 reg;
-	u32 tuner_status = 0;
-
-	*status = 0;
-
-	/* Optimize the demod for QAM */
-	if (state->current_modulation != VSB_8) {
-		/* This almost certainly applies to all boards, but for now
-		   only do it for the HVR-1600.  Once the other boards are
-		   tested, the "legacy" versions can just go away */
-		if (state->config->hvr1600_opt == S5H1409_HVR1600_OPTIMIZE) {
-			s5h1409_set_qam_interleave_mode(fe);
-			s5h1409_set_qam_amhum_mode(fe);
-		}
-	}
-
-	/* Get the demodulator status */
-	reg = s5h1409_readreg(state, 0xf1);
-	if (reg & 0x1000)
-		*status |= FE_HAS_VITERBI;
-	if (reg & 0x8000)
-		*status |= FE_HAS_LOCK | FE_HAS_SYNC;
-
-	switch (state->config->status_mode) {
-	case S5H1409_DEMODLOCKING:
-		if (*status & FE_HAS_VITERBI)
-			*status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
-		break;
-	case S5H1409_TUNERLOCKING:
-		/* Get the tuner status */
-		if (fe->ops.tuner_ops.get_status) {
-			if (fe->ops.i2c_gate_ctrl)
-				fe->ops.i2c_gate_ctrl(fe, 1);
-
-			fe->ops.tuner_ops.get_status(fe, &tuner_status);
-
-			if (fe->ops.i2c_gate_ctrl)
-				fe->ops.i2c_gate_ctrl(fe, 0);
-		}
-		if (tuner_status)
-			*status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
-		break;
-	}
-
-	dprintk("%s() status 0x%08x\n", __func__, *status);
-
-	return 0;
-}
-
-static int s5h1409_qam256_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v)
-{
-	int i, ret = -EINVAL;
-	dprintk("%s()\n", __func__);
-
-	for (i = 0; i < ARRAY_SIZE(qam256_snr_tab); i++) {
-		if (v < qam256_snr_tab[i].val) {
-			*snr = qam256_snr_tab[i].data;
-			ret = 0;
-			break;
-		}
-	}
-	return ret;
-}
-
-static int s5h1409_qam64_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v)
-{
-	int i, ret = -EINVAL;
-	dprintk("%s()\n", __func__);
-
-	for (i = 0; i < ARRAY_SIZE(qam64_snr_tab); i++) {
-		if (v < qam64_snr_tab[i].val) {
-			*snr = qam64_snr_tab[i].data;
-			ret = 0;
-			break;
-		}
-	}
-	return ret;
-}
-
-static int s5h1409_vsb_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v)
-{
-	int i, ret = -EINVAL;
-	dprintk("%s()\n", __func__);
-
-	for (i = 0; i < ARRAY_SIZE(vsb_snr_tab); i++) {
-		if (v > vsb_snr_tab[i].val) {
-			*snr = vsb_snr_tab[i].data;
-			ret = 0;
-			break;
-		}
-	}
-	dprintk("%s() snr=%d\n", __func__, *snr);
-	return ret;
-}
-
-static int s5h1409_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct s5h1409_state *state = fe->demodulator_priv;
-	u16 reg;
-	dprintk("%s()\n", __func__);
-
-	switch (state->current_modulation) {
-	case QAM_64:
-		reg = s5h1409_readreg(state, 0xf0) & 0xff;
-		return s5h1409_qam64_lookup_snr(fe, snr, reg);
-	case QAM_256:
-		reg = s5h1409_readreg(state, 0xf0) & 0xff;
-		return s5h1409_qam256_lookup_snr(fe, snr, reg);
-	case VSB_8:
-		reg = s5h1409_readreg(state, 0xf1) & 0x3ff;
-		return s5h1409_vsb_lookup_snr(fe, snr, reg);
-	default:
-		break;
-	}
-
-	return -EINVAL;
-}
-
-static int s5h1409_read_signal_strength(struct dvb_frontend *fe,
-					u16 *signal_strength)
-{
-	/* borrowed from lgdt330x.c
-	 *
-	 * Calculate strength from SNR up to 35dB
-	 * Even though the SNR can go higher than 35dB,
-	 * there is some comfort factor in having a range of
-	 * strong signals that can show at 100%
-	 */
-	u16 snr;
-	u32 tmp;
-	int ret = s5h1409_read_snr(fe, &snr);
-
-	*signal_strength = 0;
-
-	if (0 == ret) {
-		/* The following calculation method was chosen
-		 * purely for the sake of code re-use from the
-		 * other demod drivers that use this method */
-
-		/* Convert from SNR in dB * 10 to 8.24 fixed-point */
-		tmp = (snr * ((1 << 24) / 10));
-
-		/* Convert from 8.24 fixed-point to
-		 * scale the range 0 - 35*2^24 into 0 - 65535*/
-		if (tmp >= 8960 * 0x10000)
-			*signal_strength = 0xffff;
-		else
-			*signal_strength = tmp / 8960;
-	}
-
-	return ret;
-}
-
-static int s5h1409_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	struct s5h1409_state *state = fe->demodulator_priv;
-
-	*ucblocks = s5h1409_readreg(state, 0xb5);
-
-	return 0;
-}
-
-static int s5h1409_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	return s5h1409_read_ucblocks(fe, ber);
-}
-
-static int s5h1409_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct s5h1409_state *state = fe->demodulator_priv;
-
-	p->frequency = state->current_frequency;
-	p->modulation = state->current_modulation;
-
-	return 0;
-}
-
-static int s5h1409_get_tune_settings(struct dvb_frontend *fe,
-				     struct dvb_frontend_tune_settings *tune)
-{
-	tune->min_delay_ms = 1000;
-	return 0;
-}
-
-static void s5h1409_release(struct dvb_frontend *fe)
-{
-	struct s5h1409_state *state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops s5h1409_ops;
-
-struct dvb_frontend *s5h1409_attach(const struct s5h1409_config *config,
-				    struct i2c_adapter *i2c)
-{
-	struct s5h1409_state *state = NULL;
-	u16 reg;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct s5h1409_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->current_modulation = 0;
-	state->if_freq = S5H1409_VSB_IF_FREQ;
-
-	/* check if the demod exists */
-	reg = s5h1409_readreg(state, 0x04);
-	if ((reg != 0x0066) && (reg != 0x007f))
-		goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &s5h1409_ops,
-	       sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-
-	if (s5h1409_init(&state->frontend) != 0) {
-		printk(KERN_ERR "%s: Failed to initialize correctly\n",
-			__func__);
-		goto error;
-	}
-
-	/* Note: Leaving the I2C gate open here. */
-	s5h1409_i2c_gate_ctrl(&state->frontend, 1);
-
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(s5h1409_attach);
-
-static struct dvb_frontend_ops s5h1409_ops = {
-	.delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
-	.info = {
-		.name			= "Samsung S5H1409 QAM/8VSB Frontend",
-		.frequency_min		= 54000000,
-		.frequency_max		= 858000000,
-		.frequency_stepsize	= 62500,
-		.caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
-	},
-
-	.init                 = s5h1409_init,
-	.i2c_gate_ctrl        = s5h1409_i2c_gate_ctrl,
-	.set_frontend         = s5h1409_set_frontend,
-	.get_frontend         = s5h1409_get_frontend,
-	.get_tune_settings    = s5h1409_get_tune_settings,
-	.read_status          = s5h1409_read_status,
-	.read_ber             = s5h1409_read_ber,
-	.read_signal_strength = s5h1409_read_signal_strength,
-	.read_snr             = s5h1409_read_snr,
-	.read_ucblocks        = s5h1409_read_ucblocks,
-	.release              = s5h1409_release,
-};
-
-MODULE_DESCRIPTION("Samsung S5H1409 QAM-B/ATSC Demodulator driver");
-MODULE_AUTHOR("Steven Toth");
-MODULE_LICENSE("GPL");
-
-
-/*
- * Local variables:
- * c-basic-offset: 8
- */
diff --git a/drivers/media/dvb/frontends/s5h1409.h b/drivers/media/dvb/frontends/s5h1409.h
deleted file mode 100644
index 91f2ebd..0000000
--- a/drivers/media/dvb/frontends/s5h1409.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
-    Samsung S5H1409 VSB/QAM demodulator driver
-
-    Copyright (C) 2006 Steven Toth <stoth@linuxtv.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef __S5H1409_H__
-#define __S5H1409_H__
-
-#include <linux/dvb/frontend.h>
-
-struct s5h1409_config {
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* serial/parallel output */
-#define S5H1409_PARALLEL_OUTPUT 0
-#define S5H1409_SERIAL_OUTPUT   1
-	u8 output_mode;
-
-	/* GPIO Setting */
-#define S5H1409_GPIO_OFF 0
-#define S5H1409_GPIO_ON  1
-	u8 gpio;
-
-	/* IF Freq for QAM in KHz, VSB is hardcoded to 5380 */
-	u16 qam_if;
-
-	/* Spectral Inversion */
-#define S5H1409_INVERSION_OFF 0
-#define S5H1409_INVERSION_ON  1
-	u8 inversion;
-
-	/* Return lock status based on tuner lock, or demod lock */
-#define S5H1409_TUNERLOCKING 0
-#define S5H1409_DEMODLOCKING 1
-	u8 status_mode;
-
-	/* MPEG signal timing */
-#define S5H1409_MPEGTIMING_CONTINOUS_INVERTING_CLOCK       0
-#define S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK    1
-#define S5H1409_MPEGTIMING_NONCONTINOUS_INVERTING_CLOCK    2
-#define S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK 3
-	u16 mpeg_timing;
-
-	/* HVR-1600 optimizations (to better work with MXL5005s)
-	   Note: some of these are likely to be folded into the generic driver
-	   after being regression tested with other boards */
-#define S5H1409_HVR1600_NOOPTIMIZE 0
-#define S5H1409_HVR1600_OPTIMIZE   1
-	u8 hvr1600_opt;
-};
-
-#if defined(CONFIG_DVB_S5H1409) || (defined(CONFIG_DVB_S5H1409_MODULE) \
-	&& defined(MODULE))
-extern struct dvb_frontend *s5h1409_attach(const struct s5h1409_config *config,
-					   struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *s5h1409_attach(
-	const struct s5h1409_config *config,
-	struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_S5H1409 */
-
-#endif /* __S5H1409_H__ */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- */
diff --git a/drivers/media/dvb/frontends/s5h1411.c b/drivers/media/dvb/frontends/s5h1411.c
deleted file mode 100644
index 6cc4b7a..0000000
--- a/drivers/media/dvb/frontends/s5h1411.c
+++ /dev/null
@@ -1,951 +0,0 @@
-/*
-    Samsung S5H1411 VSB/QAM demodulator driver
-
-    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include "dvb_frontend.h"
-#include "s5h1411.h"
-
-struct s5h1411_state {
-
-	struct i2c_adapter *i2c;
-
-	/* configuration settings */
-	const struct s5h1411_config *config;
-
-	struct dvb_frontend frontend;
-
-	fe_modulation_t current_modulation;
-	unsigned int first_tune:1;
-
-	u32 current_frequency;
-	int if_freq;
-
-	u8 inversion;
-};
-
-static int debug;
-
-#define dprintk(arg...) do {	\
-	if (debug)		\
-		printk(arg);	\
-	} while (0)
-
-/* Register values to initialise the demod, defaults to VSB */
-static struct init_tab {
-	u8	addr;
-	u8	reg;
-	u16	data;
-} init_tab[] = {
-	{ S5H1411_I2C_TOP_ADDR, 0x00, 0x0071, },
-	{ S5H1411_I2C_TOP_ADDR, 0x08, 0x0047, },
-	{ S5H1411_I2C_TOP_ADDR, 0x1c, 0x0400, },
-	{ S5H1411_I2C_TOP_ADDR, 0x1e, 0x0370, },
-	{ S5H1411_I2C_TOP_ADDR, 0x1f, 0x342c, },
-	{ S5H1411_I2C_TOP_ADDR, 0x24, 0x0231, },
-	{ S5H1411_I2C_TOP_ADDR, 0x25, 0x1011, },
-	{ S5H1411_I2C_TOP_ADDR, 0x26, 0x0f07, },
-	{ S5H1411_I2C_TOP_ADDR, 0x27, 0x0f04, },
-	{ S5H1411_I2C_TOP_ADDR, 0x28, 0x070f, },
-	{ S5H1411_I2C_TOP_ADDR, 0x29, 0x2820, },
-	{ S5H1411_I2C_TOP_ADDR, 0x2a, 0x102e, },
-	{ S5H1411_I2C_TOP_ADDR, 0x2b, 0x0220, },
-	{ S5H1411_I2C_TOP_ADDR, 0x2e, 0x0d0e, },
-	{ S5H1411_I2C_TOP_ADDR, 0x2f, 0x1013, },
-	{ S5H1411_I2C_TOP_ADDR, 0x31, 0x171b, },
-	{ S5H1411_I2C_TOP_ADDR, 0x32, 0x0e0f, },
-	{ S5H1411_I2C_TOP_ADDR, 0x33, 0x0f10, },
-	{ S5H1411_I2C_TOP_ADDR, 0x34, 0x170e, },
-	{ S5H1411_I2C_TOP_ADDR, 0x35, 0x4b10, },
-	{ S5H1411_I2C_TOP_ADDR, 0x36, 0x0f17, },
-	{ S5H1411_I2C_TOP_ADDR, 0x3c, 0x1577, },
-	{ S5H1411_I2C_TOP_ADDR, 0x3d, 0x081a, },
-	{ S5H1411_I2C_TOP_ADDR, 0x3e, 0x77ee, },
-	{ S5H1411_I2C_TOP_ADDR, 0x40, 0x1e09, },
-	{ S5H1411_I2C_TOP_ADDR, 0x41, 0x0f0c, },
-	{ S5H1411_I2C_TOP_ADDR, 0x42, 0x1f10, },
-	{ S5H1411_I2C_TOP_ADDR, 0x4d, 0x0509, },
-	{ S5H1411_I2C_TOP_ADDR, 0x4e, 0x0a00, },
-	{ S5H1411_I2C_TOP_ADDR, 0x50, 0x0000, },
-	{ S5H1411_I2C_TOP_ADDR, 0x5b, 0x0000, },
-	{ S5H1411_I2C_TOP_ADDR, 0x5c, 0x0008, },
-	{ S5H1411_I2C_TOP_ADDR, 0x57, 0x1101, },
-	{ S5H1411_I2C_TOP_ADDR, 0x65, 0x007c, },
-	{ S5H1411_I2C_TOP_ADDR, 0x68, 0x0512, },
-	{ S5H1411_I2C_TOP_ADDR, 0x69, 0x0258, },
-	{ S5H1411_I2C_TOP_ADDR, 0x70, 0x0004, },
-	{ S5H1411_I2C_TOP_ADDR, 0x71, 0x0007, },
-	{ S5H1411_I2C_TOP_ADDR, 0x76, 0x00a9, },
-	{ S5H1411_I2C_TOP_ADDR, 0x78, 0x3141, },
-	{ S5H1411_I2C_TOP_ADDR, 0x7a, 0x3141, },
-	{ S5H1411_I2C_TOP_ADDR, 0xb3, 0x8003, },
-	{ S5H1411_I2C_TOP_ADDR, 0xb5, 0xa6bb, },
-	{ S5H1411_I2C_TOP_ADDR, 0xb6, 0x0609, },
-	{ S5H1411_I2C_TOP_ADDR, 0xb7, 0x2f06, },
-	{ S5H1411_I2C_TOP_ADDR, 0xb8, 0x003f, },
-	{ S5H1411_I2C_TOP_ADDR, 0xb9, 0x2700, },
-	{ S5H1411_I2C_TOP_ADDR, 0xba, 0xfac8, },
-	{ S5H1411_I2C_TOP_ADDR, 0xbe, 0x1003, },
-	{ S5H1411_I2C_TOP_ADDR, 0xbf, 0x103f, },
-	{ S5H1411_I2C_TOP_ADDR, 0xce, 0x2000, },
-	{ S5H1411_I2C_TOP_ADDR, 0xcf, 0x0800, },
-	{ S5H1411_I2C_TOP_ADDR, 0xd0, 0x0800, },
-	{ S5H1411_I2C_TOP_ADDR, 0xd1, 0x0400, },
-	{ S5H1411_I2C_TOP_ADDR, 0xd2, 0x0800, },
-	{ S5H1411_I2C_TOP_ADDR, 0xd3, 0x2000, },
-	{ S5H1411_I2C_TOP_ADDR, 0xd4, 0x3000, },
-	{ S5H1411_I2C_TOP_ADDR, 0xdb, 0x4a9b, },
-	{ S5H1411_I2C_TOP_ADDR, 0xdc, 0x1000, },
-	{ S5H1411_I2C_TOP_ADDR, 0xde, 0x0001, },
-	{ S5H1411_I2C_TOP_ADDR, 0xdf, 0x0000, },
-	{ S5H1411_I2C_TOP_ADDR, 0xe3, 0x0301, },
-	{ S5H1411_I2C_QAM_ADDR, 0xf3, 0x0000, },
-	{ S5H1411_I2C_QAM_ADDR, 0xf3, 0x0001, },
-	{ S5H1411_I2C_QAM_ADDR, 0x08, 0x0600, },
-	{ S5H1411_I2C_QAM_ADDR, 0x18, 0x4201, },
-	{ S5H1411_I2C_QAM_ADDR, 0x1e, 0x6476, },
-	{ S5H1411_I2C_QAM_ADDR, 0x21, 0x0830, },
-	{ S5H1411_I2C_QAM_ADDR, 0x0c, 0x5679, },
-	{ S5H1411_I2C_QAM_ADDR, 0x0d, 0x579b, },
-	{ S5H1411_I2C_QAM_ADDR, 0x24, 0x0102, },
-	{ S5H1411_I2C_QAM_ADDR, 0x31, 0x7488, },
-	{ S5H1411_I2C_QAM_ADDR, 0x32, 0x0a08, },
-	{ S5H1411_I2C_QAM_ADDR, 0x3d, 0x8689, },
-	{ S5H1411_I2C_QAM_ADDR, 0x49, 0x0048, },
-	{ S5H1411_I2C_QAM_ADDR, 0x57, 0x2012, },
-	{ S5H1411_I2C_QAM_ADDR, 0x5d, 0x7676, },
-	{ S5H1411_I2C_QAM_ADDR, 0x04, 0x0400, },
-	{ S5H1411_I2C_QAM_ADDR, 0x58, 0x00c0, },
-	{ S5H1411_I2C_QAM_ADDR, 0x5b, 0x0100, },
-};
-
-/* VSB SNR lookup table */
-static struct vsb_snr_tab {
-	u16	val;
-	u16	data;
-} vsb_snr_tab[] = {
-	{  0x39f, 300, },
-	{  0x39b, 295, },
-	{  0x397, 290, },
-	{  0x394, 285, },
-	{  0x38f, 280, },
-	{  0x38b, 275, },
-	{  0x387, 270, },
-	{  0x382, 265, },
-	{  0x37d, 260, },
-	{  0x377, 255, },
-	{  0x370, 250, },
-	{  0x36a, 245, },
-	{  0x364, 240, },
-	{  0x35b, 235, },
-	{  0x353, 230, },
-	{  0x349, 225, },
-	{  0x340, 320, },
-	{  0x337, 215, },
-	{  0x327, 210, },
-	{  0x31b, 205, },
-	{  0x310, 200, },
-	{  0x302, 195, },
-	{  0x2f3, 190, },
-	{  0x2e4, 185, },
-	{  0x2d7, 180, },
-	{  0x2cd, 175, },
-	{  0x2bb, 170, },
-	{  0x2a9, 165, },
-	{  0x29e, 160, },
-	{  0x284, 155, },
-	{  0x27a, 150, },
-	{  0x260, 145, },
-	{  0x23a, 140, },
-	{  0x224, 135, },
-	{  0x213, 130, },
-	{  0x204, 125, },
-	{  0x1fe, 120, },
-	{      0,   0, },
-};
-
-/* QAM64 SNR lookup table */
-static struct qam64_snr_tab {
-	u16	val;
-	u16	data;
-} qam64_snr_tab[] = {
-	{  0x0001,   0, },
-	{  0x0af0, 300, },
-	{  0x0d80, 290, },
-	{  0x10a0, 280, },
-	{  0x14b5, 270, },
-	{  0x1590, 268, },
-	{  0x1680, 266, },
-	{  0x17b0, 264, },
-	{  0x18c0, 262, },
-	{  0x19b0, 260, },
-	{  0x1ad0, 258, },
-	{  0x1d00, 256, },
-	{  0x1da0, 254, },
-	{  0x1ef0, 252, },
-	{  0x2050, 250, },
-	{  0x20f0, 249, },
-	{  0x21d0, 248, },
-	{  0x22b0, 247, },
-	{  0x23a0, 246, },
-	{  0x2470, 245, },
-	{  0x24f0, 244, },
-	{  0x25a0, 243, },
-	{  0x26c0, 242, },
-	{  0x27b0, 241, },
-	{  0x28d0, 240, },
-	{  0x29b0, 239, },
-	{  0x2ad0, 238, },
-	{  0x2ba0, 237, },
-	{  0x2c80, 236, },
-	{  0x2d20, 235, },
-	{  0x2e00, 234, },
-	{  0x2f10, 233, },
-	{  0x3050, 232, },
-	{  0x3190, 231, },
-	{  0x3300, 230, },
-	{  0x3340, 229, },
-	{  0x3200, 228, },
-	{  0x3550, 227, },
-	{  0x3610, 226, },
-	{  0x3600, 225, },
-	{  0x3700, 224, },
-	{  0x3800, 223, },
-	{  0x3920, 222, },
-	{  0x3a20, 221, },
-	{  0x3b30, 220, },
-	{  0x3d00, 219, },
-	{  0x3e00, 218, },
-	{  0x4000, 217, },
-	{  0x4100, 216, },
-	{  0x4300, 215, },
-	{  0x4400, 214, },
-	{  0x4600, 213, },
-	{  0x4700, 212, },
-	{  0x4800, 211, },
-	{  0x4a00, 210, },
-	{  0x4b00, 209, },
-	{  0x4d00, 208, },
-	{  0x4f00, 207, },
-	{  0x5050, 206, },
-	{  0x5200, 205, },
-	{  0x53c0, 204, },
-	{  0x5450, 203, },
-	{  0x5650, 202, },
-	{  0x5820, 201, },
-	{  0x6000, 200, },
-	{  0xffff,   0, },
-};
-
-/* QAM256 SNR lookup table */
-static struct qam256_snr_tab {
-	u16	val;
-	u16	data;
-} qam256_snr_tab[] = {
-	{  0x0001,   0, },
-	{  0x0970, 400, },
-	{  0x0a90, 390, },
-	{  0x0b90, 380, },
-	{  0x0d90, 370, },
-	{  0x0ff0, 360, },
-	{  0x1240, 350, },
-	{  0x1345, 348, },
-	{  0x13c0, 346, },
-	{  0x14c0, 344, },
-	{  0x1500, 342, },
-	{  0x1610, 340, },
-	{  0x1700, 338, },
-	{  0x1800, 336, },
-	{  0x18b0, 334, },
-	{  0x1900, 332, },
-	{  0x1ab0, 330, },
-	{  0x1bc0, 328, },
-	{  0x1cb0, 326, },
-	{  0x1db0, 324, },
-	{  0x1eb0, 322, },
-	{  0x2030, 320, },
-	{  0x2200, 318, },
-	{  0x2280, 316, },
-	{  0x2410, 314, },
-	{  0x25b0, 312, },
-	{  0x27a0, 310, },
-	{  0x2840, 308, },
-	{  0x29d0, 306, },
-	{  0x2b10, 304, },
-	{  0x2d30, 302, },
-	{  0x2f20, 300, },
-	{  0x30c0, 298, },
-	{  0x3260, 297, },
-	{  0x32c0, 296, },
-	{  0x3300, 295, },
-	{  0x33b0, 294, },
-	{  0x34b0, 293, },
-	{  0x35a0, 292, },
-	{  0x3650, 291, },
-	{  0x3800, 290, },
-	{  0x3900, 289, },
-	{  0x3a50, 288, },
-	{  0x3b30, 287, },
-	{  0x3cb0, 286, },
-	{  0x3e20, 285, },
-	{  0x3fa0, 284, },
-	{  0x40a0, 283, },
-	{  0x41c0, 282, },
-	{  0x42f0, 281, },
-	{  0x44a0, 280, },
-	{  0x4600, 279, },
-	{  0x47b0, 278, },
-	{  0x4900, 277, },
-	{  0x4a00, 276, },
-	{  0x4ba0, 275, },
-	{  0x4d00, 274, },
-	{  0x4f00, 273, },
-	{  0x5000, 272, },
-	{  0x51f0, 272, },
-	{  0x53a0, 270, },
-	{  0x5520, 269, },
-	{  0x5700, 268, },
-	{  0x5800, 267, },
-	{  0x5a00, 266, },
-	{  0x5c00, 265, },
-	{  0x5d00, 264, },
-	{  0x5f00, 263, },
-	{  0x6000, 262, },
-	{  0x6200, 261, },
-	{  0x6400, 260, },
-	{  0xffff,   0, },
-};
-
-/* 8 bit registers, 16 bit values */
-static int s5h1411_writereg(struct s5h1411_state *state,
-	u8 addr, u8 reg, u16 data)
-{
-	int ret;
-	u8 buf[] = { reg, data >> 8,  data & 0xff };
-
-	struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 3 };
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-
-	if (ret != 1)
-		printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, "
-		       "ret == %i)\n", __func__, addr, reg, data, ret);
-
-	return (ret != 1) ? -1 : 0;
-}
-
-static u16 s5h1411_readreg(struct s5h1411_state *state, u8 addr, u8 reg)
-{
-	int ret;
-	u8 b0[] = { reg };
-	u8 b1[] = { 0, 0 };
-
-	struct i2c_msg msg[] = {
-		{ .addr = addr, .flags = 0, .buf = b0, .len = 1 },
-		{ .addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 2 } };
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2)
-		printk(KERN_ERR "%s: readreg error (ret == %i)\n",
-			__func__, ret);
-	return (b1[0] << 8) | b1[1];
-}
-
-static int s5h1411_softreset(struct dvb_frontend *fe)
-{
-	struct s5h1411_state *state = fe->demodulator_priv;
-
-	dprintk("%s()\n", __func__);
-
-	s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf7, 0);
-	s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf7, 1);
-	return 0;
-}
-
-static int s5h1411_set_if_freq(struct dvb_frontend *fe, int KHz)
-{
-	struct s5h1411_state *state = fe->demodulator_priv;
-
-	dprintk("%s(%d KHz)\n", __func__, KHz);
-
-	switch (KHz) {
-	case 3250:
-		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x38, 0x10d5);
-		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x39, 0x5342);
-		s5h1411_writereg(state, S5H1411_I2C_QAM_ADDR, 0x2c, 0x10d9);
-		break;
-	case 3500:
-		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x38, 0x1225);
-		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x39, 0x1e96);
-		s5h1411_writereg(state, S5H1411_I2C_QAM_ADDR, 0x2c, 0x1225);
-		break;
-	case 4000:
-		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x38, 0x14bc);
-		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x39, 0xb53e);
-		s5h1411_writereg(state, S5H1411_I2C_QAM_ADDR, 0x2c, 0x14bd);
-		break;
-	default:
-		dprintk("%s(%d KHz) Invalid, defaulting to 5380\n",
-			__func__, KHz);
-		/* no break, need to continue */
-	case 5380:
-	case 44000:
-		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x38, 0x1be4);
-		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x39, 0x3655);
-		s5h1411_writereg(state, S5H1411_I2C_QAM_ADDR, 0x2c, 0x1be4);
-		break;
-	}
-
-	state->if_freq = KHz;
-
-	return 0;
-}
-
-static int s5h1411_set_mpeg_timing(struct dvb_frontend *fe, int mode)
-{
-	struct s5h1411_state *state = fe->demodulator_priv;
-	u16 val;
-
-	dprintk("%s(%d)\n", __func__, mode);
-
-	val = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xbe) & 0xcfff;
-	switch (mode) {
-	case S5H1411_MPEGTIMING_CONTINOUS_INVERTING_CLOCK:
-		val |= 0x0000;
-		break;
-	case S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK:
-		dprintk("%s(%d) Mode1 or Defaulting\n", __func__, mode);
-		val |= 0x1000;
-		break;
-	case S5H1411_MPEGTIMING_NONCONTINOUS_INVERTING_CLOCK:
-		val |= 0x2000;
-		break;
-	case S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK:
-		val |= 0x3000;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/* Configure MPEG Signal Timing charactistics */
-	return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xbe, val);
-}
-
-static int s5h1411_set_spectralinversion(struct dvb_frontend *fe, int inversion)
-{
-	struct s5h1411_state *state = fe->demodulator_priv;
-	u16 val;
-
-	dprintk("%s(%d)\n", __func__, inversion);
-	val = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0x24) & ~0x1000;
-
-	if (inversion == 1)
-		val |= 0x1000; /* Inverted */
-
-	state->inversion = inversion;
-	return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x24, val);
-}
-
-static int s5h1411_set_serialmode(struct dvb_frontend *fe, int serial)
-{
-	struct s5h1411_state *state = fe->demodulator_priv;
-	u16 val;
-
-	dprintk("%s(%d)\n", __func__, serial);
-	val = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xbd) & ~0x100;
-
-	if (serial == 1)
-		val |= 0x100;
-
-	return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xbd, val);
-}
-
-static int s5h1411_enable_modulation(struct dvb_frontend *fe,
-				     fe_modulation_t m)
-{
-	struct s5h1411_state *state = fe->demodulator_priv;
-
-	dprintk("%s(0x%08x)\n", __func__, m);
-
-	if ((state->first_tune == 0) && (m == state->current_modulation)) {
-		dprintk("%s() Already at desired modulation.  Skipping...\n",
-			__func__);
-		return 0;
-	}
-
-	switch (m) {
-	case VSB_8:
-		dprintk("%s() VSB_8\n", __func__);
-		s5h1411_set_if_freq(fe, state->config->vsb_if);
-		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x00, 0x71);
-		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf6, 0x00);
-		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xcd, 0xf1);
-		break;
-	case QAM_64:
-	case QAM_256:
-	case QAM_AUTO:
-		dprintk("%s() QAM_AUTO (64/256)\n", __func__);
-		s5h1411_set_if_freq(fe, state->config->qam_if);
-		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x00, 0x0171);
-		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf6, 0x0001);
-		s5h1411_writereg(state, S5H1411_I2C_QAM_ADDR, 0x16, 0x1101);
-		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xcd, 0x00f0);
-		break;
-	default:
-		dprintk("%s() Invalid modulation\n", __func__);
-		return -EINVAL;
-	}
-
-	state->current_modulation = m;
-	state->first_tune = 0;
-	s5h1411_softreset(fe);
-
-	return 0;
-}
-
-static int s5h1411_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct s5h1411_state *state = fe->demodulator_priv;
-
-	dprintk("%s(%d)\n", __func__, enable);
-
-	if (enable)
-		return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf5, 1);
-	else
-		return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf5, 0);
-}
-
-static int s5h1411_set_gpio(struct dvb_frontend *fe, int enable)
-{
-	struct s5h1411_state *state = fe->demodulator_priv;
-	u16 val;
-
-	dprintk("%s(%d)\n", __func__, enable);
-
-	val = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xe0) & ~0x02;
-
-	if (enable)
-		return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xe0,
-				val | 0x02);
-	else
-		return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xe0, val);
-}
-
-static int s5h1411_set_powerstate(struct dvb_frontend *fe, int enable)
-{
-	struct s5h1411_state *state = fe->demodulator_priv;
-
-	dprintk("%s(%d)\n", __func__, enable);
-
-	if (enable)
-		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf4, 1);
-	else {
-		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf4, 0);
-		s5h1411_softreset(fe);
-	}
-
-	return 0;
-}
-
-static int s5h1411_sleep(struct dvb_frontend *fe)
-{
-	return s5h1411_set_powerstate(fe, 1);
-}
-
-static int s5h1411_register_reset(struct dvb_frontend *fe)
-{
-	struct s5h1411_state *state = fe->demodulator_priv;
-
-	dprintk("%s()\n", __func__);
-
-	return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf3, 0);
-}
-
-/* Talk to the demod, set the FEC, GUARD, QAM settings etc */
-static int s5h1411_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct s5h1411_state *state = fe->demodulator_priv;
-
-	dprintk("%s(frequency=%d)\n", __func__, p->frequency);
-
-	s5h1411_softreset(fe);
-
-	state->current_frequency = p->frequency;
-
-	s5h1411_enable_modulation(fe, p->modulation);
-
-	if (fe->ops.tuner_ops.set_params) {
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 1);
-
-		fe->ops.tuner_ops.set_params(fe);
-
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	/* Issue a reset to the demod so it knows to resync against the
-	   newly tuned frequency */
-	s5h1411_softreset(fe);
-
-	return 0;
-}
-
-/* Reset the demod hardware and reset all of the configuration registers
-   to a default state. */
-static int s5h1411_init(struct dvb_frontend *fe)
-{
-	struct s5h1411_state *state = fe->demodulator_priv;
-	int i;
-
-	dprintk("%s()\n", __func__);
-
-	s5h1411_set_powerstate(fe, 0);
-	s5h1411_register_reset(fe);
-
-	for (i = 0; i < ARRAY_SIZE(init_tab); i++)
-		s5h1411_writereg(state, init_tab[i].addr,
-			init_tab[i].reg,
-			init_tab[i].data);
-
-	/* The datasheet says that after initialisation, VSB is default */
-	state->current_modulation = VSB_8;
-
-	/* Although the datasheet says it's in VSB, empirical evidence
-	   shows problems getting lock on the first tuning request.  Make
-	   sure we call enable_modulation the first time around */
-	state->first_tune = 1;
-
-	if (state->config->output_mode == S5H1411_SERIAL_OUTPUT)
-		/* Serial */
-		s5h1411_set_serialmode(fe, 1);
-	else
-		/* Parallel */
-		s5h1411_set_serialmode(fe, 0);
-
-	s5h1411_set_spectralinversion(fe, state->config->inversion);
-	s5h1411_set_if_freq(fe, state->config->vsb_if);
-	s5h1411_set_gpio(fe, state->config->gpio);
-	s5h1411_set_mpeg_timing(fe, state->config->mpeg_timing);
-	s5h1411_softreset(fe);
-
-	/* Note: Leaving the I2C gate closed. */
-	s5h1411_i2c_gate_ctrl(fe, 0);
-
-	return 0;
-}
-
-static int s5h1411_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct s5h1411_state *state = fe->demodulator_priv;
-	u16 reg;
-	u32 tuner_status = 0;
-
-	*status = 0;
-
-	/* Register F2 bit 15 = Master Lock, removed */
-
-	switch (state->current_modulation) {
-	case QAM_64:
-	case QAM_256:
-		reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf0);
-		if (reg & 0x10) /* QAM FEC Lock */
-			*status |= FE_HAS_SYNC | FE_HAS_LOCK;
-		if (reg & 0x100) /* QAM EQ Lock */
-			*status |= FE_HAS_VITERBI | FE_HAS_CARRIER | FE_HAS_SIGNAL;
-
-		break;
-	case VSB_8:
-		reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf2);
-		if (reg & 0x1000) /* FEC Lock */
-			*status |= FE_HAS_SYNC | FE_HAS_LOCK;
-		if (reg & 0x2000) /* EQ Lock */
-			*status |= FE_HAS_VITERBI | FE_HAS_CARRIER | FE_HAS_SIGNAL;
-
-		reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0x53);
-		if (reg & 0x1) /* AFC Lock */
-			*status |= FE_HAS_SIGNAL;
-
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	switch (state->config->status_mode) {
-	case S5H1411_DEMODLOCKING:
-		if (*status & FE_HAS_VITERBI)
-			*status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
-		break;
-	case S5H1411_TUNERLOCKING:
-		/* Get the tuner status */
-		if (fe->ops.tuner_ops.get_status) {
-			if (fe->ops.i2c_gate_ctrl)
-				fe->ops.i2c_gate_ctrl(fe, 1);
-
-			fe->ops.tuner_ops.get_status(fe, &tuner_status);
-
-			if (fe->ops.i2c_gate_ctrl)
-				fe->ops.i2c_gate_ctrl(fe, 0);
-		}
-		if (tuner_status)
-			*status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
-		break;
-	}
-
-	dprintk("%s() status 0x%08x\n", __func__, *status);
-
-	return 0;
-}
-
-static int s5h1411_qam256_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v)
-{
-	int i, ret = -EINVAL;
-	dprintk("%s()\n", __func__);
-
-	for (i = 0; i < ARRAY_SIZE(qam256_snr_tab); i++) {
-		if (v < qam256_snr_tab[i].val) {
-			*snr = qam256_snr_tab[i].data;
-			ret = 0;
-			break;
-		}
-	}
-	return ret;
-}
-
-static int s5h1411_qam64_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v)
-{
-	int i, ret = -EINVAL;
-	dprintk("%s()\n", __func__);
-
-	for (i = 0; i < ARRAY_SIZE(qam64_snr_tab); i++) {
-		if (v < qam64_snr_tab[i].val) {
-			*snr = qam64_snr_tab[i].data;
-			ret = 0;
-			break;
-		}
-	}
-	return ret;
-}
-
-static int s5h1411_vsb_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v)
-{
-	int i, ret = -EINVAL;
-	dprintk("%s()\n", __func__);
-
-	for (i = 0; i < ARRAY_SIZE(vsb_snr_tab); i++) {
-		if (v > vsb_snr_tab[i].val) {
-			*snr = vsb_snr_tab[i].data;
-			ret = 0;
-			break;
-		}
-	}
-	dprintk("%s() snr=%d\n", __func__, *snr);
-	return ret;
-}
-
-static int s5h1411_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct s5h1411_state *state = fe->demodulator_priv;
-	u16 reg;
-	dprintk("%s()\n", __func__);
-
-	switch (state->current_modulation) {
-	case QAM_64:
-		reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf1);
-		return s5h1411_qam64_lookup_snr(fe, snr, reg);
-	case QAM_256:
-		reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf1);
-		return s5h1411_qam256_lookup_snr(fe, snr, reg);
-	case VSB_8:
-		reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR,
-			0xf2) & 0x3ff;
-		return s5h1411_vsb_lookup_snr(fe, snr, reg);
-	default:
-		break;
-	}
-
-	return -EINVAL;
-}
-
-static int s5h1411_read_signal_strength(struct dvb_frontend *fe,
-	u16 *signal_strength)
-{
-	/* borrowed from lgdt330x.c
-	 *
-	 * Calculate strength from SNR up to 35dB
-	 * Even though the SNR can go higher than 35dB,
-	 * there is some comfort factor in having a range of
-	 * strong signals that can show at 100%
-	 */
-	u16 snr;
-	u32 tmp;
-	int ret = s5h1411_read_snr(fe, &snr);
-
-	*signal_strength = 0;
-
-	if (0 == ret) {
-		/* The following calculation method was chosen
-		 * purely for the sake of code re-use from the
-		 * other demod drivers that use this method */
-
-		/* Convert from SNR in dB * 10 to 8.24 fixed-point */
-		tmp = (snr * ((1 << 24) / 10));
-
-		/* Convert from 8.24 fixed-point to
-		 * scale the range 0 - 35*2^24 into 0 - 65535*/
-		if (tmp >= 8960 * 0x10000)
-			*signal_strength = 0xffff;
-		else
-			*signal_strength = tmp / 8960;
-	}
-
-	return ret;
-}
-
-static int s5h1411_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	struct s5h1411_state *state = fe->demodulator_priv;
-
-	*ucblocks = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xc9);
-
-	return 0;
-}
-
-static int s5h1411_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	return s5h1411_read_ucblocks(fe, ber);
-}
-
-static int s5h1411_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct s5h1411_state *state = fe->demodulator_priv;
-
-	p->frequency = state->current_frequency;
-	p->modulation = state->current_modulation;
-
-	return 0;
-}
-
-static int s5h1411_get_tune_settings(struct dvb_frontend *fe,
-				     struct dvb_frontend_tune_settings *tune)
-{
-	tune->min_delay_ms = 1000;
-	return 0;
-}
-
-static void s5h1411_release(struct dvb_frontend *fe)
-{
-	struct s5h1411_state *state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops s5h1411_ops;
-
-struct dvb_frontend *s5h1411_attach(const struct s5h1411_config *config,
-				    struct i2c_adapter *i2c)
-{
-	struct s5h1411_state *state = NULL;
-	u16 reg;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct s5h1411_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->current_modulation = VSB_8;
-	state->inversion = state->config->inversion;
-
-	/* check if the demod exists */
-	reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0x05);
-	if (reg != 0x0066)
-		goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &s5h1411_ops,
-	       sizeof(struct dvb_frontend_ops));
-
-	state->frontend.demodulator_priv = state;
-
-	if (s5h1411_init(&state->frontend) != 0) {
-		printk(KERN_ERR "%s: Failed to initialize correctly\n",
-			__func__);
-		goto error;
-	}
-
-	/* Note: Leaving the I2C gate open here. */
-	s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf5, 1);
-
-	/* Put the device into low-power mode until first use */
-	s5h1411_set_powerstate(&state->frontend, 1);
-
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(s5h1411_attach);
-
-static struct dvb_frontend_ops s5h1411_ops = {
-	.delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
-	.info = {
-		.name			= "Samsung S5H1411 QAM/8VSB Frontend",
-		.frequency_min		= 54000000,
-		.frequency_max		= 858000000,
-		.frequency_stepsize	= 62500,
-		.caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
-	},
-
-	.init                 = s5h1411_init,
-	.sleep                = s5h1411_sleep,
-	.i2c_gate_ctrl        = s5h1411_i2c_gate_ctrl,
-	.set_frontend         = s5h1411_set_frontend,
-	.get_frontend         = s5h1411_get_frontend,
-	.get_tune_settings    = s5h1411_get_tune_settings,
-	.read_status          = s5h1411_read_status,
-	.read_ber             = s5h1411_read_ber,
-	.read_signal_strength = s5h1411_read_signal_strength,
-	.read_snr             = s5h1411_read_snr,
-	.read_ucblocks        = s5h1411_read_ucblocks,
-	.release              = s5h1411_release,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Enable verbose debug messages");
-
-MODULE_DESCRIPTION("Samsung S5H1411 QAM-B/ATSC Demodulator driver");
-MODULE_AUTHOR("Steven Toth");
-MODULE_LICENSE("GPL");
-
-/*
- * Local variables:
- * c-basic-offset: 8
- */
diff --git a/drivers/media/dvb/frontends/s5h1411.h b/drivers/media/dvb/frontends/s5h1411.h
deleted file mode 100644
index 45ec0f8..0000000
--- a/drivers/media/dvb/frontends/s5h1411.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
-    Samsung S5H1411 VSB/QAM demodulator driver
-
-    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef __S5H1411_H__
-#define __S5H1411_H__
-
-#include <linux/dvb/frontend.h>
-
-#define S5H1411_I2C_TOP_ADDR (0x32 >> 1)
-#define S5H1411_I2C_QAM_ADDR (0x34 >> 1)
-
-struct s5h1411_config {
-
-	/* serial/parallel output */
-#define S5H1411_PARALLEL_OUTPUT 0
-#define S5H1411_SERIAL_OUTPUT   1
-	u8 output_mode;
-
-	/* GPIO Setting */
-#define S5H1411_GPIO_OFF 0
-#define S5H1411_GPIO_ON  1
-	u8 gpio;
-
-	/* MPEG signal timing */
-#define S5H1411_MPEGTIMING_CONTINOUS_INVERTING_CLOCK       0
-#define S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK    1
-#define S5H1411_MPEGTIMING_NONCONTINOUS_INVERTING_CLOCK    2
-#define S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK 3
-	u16 mpeg_timing;
-
-	/* IF Freq for QAM and VSB in KHz */
-#define S5H1411_IF_3250  3250
-#define S5H1411_IF_3500  3500
-#define S5H1411_IF_4000  4000
-#define S5H1411_IF_5380  5380
-#define S5H1411_IF_44000 44000
-#define S5H1411_VSB_IF_DEFAULT S5H1411_IF_44000
-#define S5H1411_QAM_IF_DEFAULT S5H1411_IF_44000
-	u16 qam_if;
-	u16 vsb_if;
-
-	/* Spectral Inversion */
-#define S5H1411_INVERSION_OFF 0
-#define S5H1411_INVERSION_ON  1
-	u8 inversion;
-
-	/* Return lock status based on tuner lock, or demod lock */
-#define S5H1411_TUNERLOCKING 0
-#define S5H1411_DEMODLOCKING 1
-	u8 status_mode;
-};
-
-#if defined(CONFIG_DVB_S5H1411) || \
-	(defined(CONFIG_DVB_S5H1411_MODULE) && defined(MODULE))
-extern struct dvb_frontend *s5h1411_attach(const struct s5h1411_config *config,
-					   struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *s5h1411_attach(
-	const struct s5h1411_config *config,
-	struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_S5H1411 */
-
-#endif /* __S5H1411_H__ */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- */
diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c
deleted file mode 100644
index e2fec9e..0000000
--- a/drivers/media/dvb/frontends/s5h1420.c
+++ /dev/null
@@ -1,960 +0,0 @@
-/*
- * Driver for
- *    Samsung S5H1420 and
- *    PnpNetwork PN1010 QPSK Demodulator
- *
- * Copyright (C) 2005 Andrew de Quincey <adq_dvb@lidskialf.net>
- * Copyright (C) 2005-8 Patrick Boettcher <pb@linuxtv.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/jiffies.h>
-#include <asm/div64.h>
-
-#include <linux/i2c.h>
-
-
-#include "dvb_frontend.h"
-#include "s5h1420.h"
-#include "s5h1420_priv.h"
-
-#define TONE_FREQ 22000
-
-struct s5h1420_state {
-	struct i2c_adapter* i2c;
-	const struct s5h1420_config* config;
-
-	struct dvb_frontend frontend;
-	struct i2c_adapter tuner_i2c_adapter;
-
-	u8 CON_1_val;
-
-	u8 postlocked:1;
-	u32 fclk;
-	u32 tunedfreq;
-	fe_code_rate_t fec_inner;
-	u32 symbol_rate;
-
-	/* FIXME: ugly workaround for flexcop's incapable i2c-controller
-	 * it does not support repeated-start, workaround: write addr-1
-	 * and then read
-	 */
-	u8 shadow[256];
-};
-
-static u32 s5h1420_getsymbolrate(struct s5h1420_state* state);
-static int s5h1420_get_tune_settings(struct dvb_frontend* fe,
-				     struct dvb_frontend_tune_settings* fesettings);
-
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "enable debugging");
-
-#define dprintk(x...) do { \
-	if (debug) \
-		printk(KERN_DEBUG "S5H1420: " x); \
-} while (0)
-
-static u8 s5h1420_readreg(struct s5h1420_state *state, u8 reg)
-{
-	int ret;
-	u8 b[2];
-	struct i2c_msg msg[] = {
-		{ .addr = state->config->demod_address, .flags = 0, .buf = b, .len = 2 },
-		{ .addr = state->config->demod_address, .flags = 0, .buf = &reg, .len = 1 },
-		{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b, .len = 1 },
-	};
-
-	b[0] = (reg - 1) & 0xff;
-	b[1] = state->shadow[(reg - 1) & 0xff];
-
-	if (state->config->repeated_start_workaround) {
-		ret = i2c_transfer(state->i2c, msg, 3);
-		if (ret != 3)
-			return ret;
-	} else {
-		ret = i2c_transfer(state->i2c, &msg[1], 1);
-		if (ret != 1)
-			return ret;
-		ret = i2c_transfer(state->i2c, &msg[2], 1);
-		if (ret != 1)
-			return ret;
-	}
-
-	/* dprintk("rd(%02x): %02x %02x\n", state->config->demod_address, reg, b[0]); */
-
-	return b[0];
-}
-
-static int s5h1420_writereg (struct s5h1420_state* state, u8 reg, u8 data)
-{
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
-	int err;
-
-	/* dprintk("wr(%02x): %02x %02x\n", state->config->demod_address, reg, data); */
-	err = i2c_transfer(state->i2c, &msg, 1);
-	if (err != 1) {
-		dprintk("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data);
-		return -EREMOTEIO;
-	}
-	state->shadow[reg] = data;
-
-	return 0;
-}
-
-static int s5h1420_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
-{
-	struct s5h1420_state* state = fe->demodulator_priv;
-
-	dprintk("enter %s\n", __func__);
-
-	switch(voltage) {
-	case SEC_VOLTAGE_13:
-		s5h1420_writereg(state, 0x3c,
-				 (s5h1420_readreg(state, 0x3c) & 0xfe) | 0x02);
-		break;
-
-	case SEC_VOLTAGE_18:
-		s5h1420_writereg(state, 0x3c, s5h1420_readreg(state, 0x3c) | 0x03);
-		break;
-
-	case SEC_VOLTAGE_OFF:
-		s5h1420_writereg(state, 0x3c, s5h1420_readreg(state, 0x3c) & 0xfd);
-		break;
-	}
-
-	dprintk("leave %s\n", __func__);
-	return 0;
-}
-
-static int s5h1420_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
-{
-	struct s5h1420_state* state = fe->demodulator_priv;
-
-	dprintk("enter %s\n", __func__);
-	switch(tone) {
-	case SEC_TONE_ON:
-		s5h1420_writereg(state, 0x3b,
-				 (s5h1420_readreg(state, 0x3b) & 0x74) | 0x08);
-		break;
-
-	case SEC_TONE_OFF:
-		s5h1420_writereg(state, 0x3b,
-				 (s5h1420_readreg(state, 0x3b) & 0x74) | 0x01);
-		break;
-	}
-	dprintk("leave %s\n", __func__);
-
-	return 0;
-}
-
-static int s5h1420_send_master_cmd (struct dvb_frontend* fe,
-				    struct dvb_diseqc_master_cmd* cmd)
-{
-	struct s5h1420_state* state = fe->demodulator_priv;
-	u8 val;
-	int i;
-	unsigned long timeout;
-	int result = 0;
-
-	dprintk("enter %s\n", __func__);
-	if (cmd->msg_len > 8)
-		return -EINVAL;
-
-	/* setup for DISEQC */
-	val = s5h1420_readreg(state, 0x3b);
-	s5h1420_writereg(state, 0x3b, 0x02);
-	msleep(15);
-
-	/* write the DISEQC command bytes */
-	for(i=0; i< cmd->msg_len; i++) {
-		s5h1420_writereg(state, 0x3d + i, cmd->msg[i]);
-	}
-
-	/* kick off transmission */
-	s5h1420_writereg(state, 0x3b, s5h1420_readreg(state, 0x3b) |
-				      ((cmd->msg_len-1) << 4) | 0x08);
-
-	/* wait for transmission to complete */
-	timeout = jiffies + ((100*HZ) / 1000);
-	while(time_before(jiffies, timeout)) {
-		if (!(s5h1420_readreg(state, 0x3b) & 0x08))
-			break;
-
-		msleep(5);
-	}
-	if (time_after(jiffies, timeout))
-		result = -ETIMEDOUT;
-
-	/* restore original settings */
-	s5h1420_writereg(state, 0x3b, val);
-	msleep(15);
-	dprintk("leave %s\n", __func__);
-	return result;
-}
-
-static int s5h1420_recv_slave_reply (struct dvb_frontend* fe,
-				     struct dvb_diseqc_slave_reply* reply)
-{
-	struct s5h1420_state* state = fe->demodulator_priv;
-	u8 val;
-	int i;
-	int length;
-	unsigned long timeout;
-	int result = 0;
-
-	/* setup for DISEQC receive */
-	val = s5h1420_readreg(state, 0x3b);
-	s5h1420_writereg(state, 0x3b, 0x82); /* FIXME: guess - do we need to set DIS_RDY(0x08) in receive mode? */
-	msleep(15);
-
-	/* wait for reception to complete */
-	timeout = jiffies + ((reply->timeout*HZ) / 1000);
-	while(time_before(jiffies, timeout)) {
-		if (!(s5h1420_readreg(state, 0x3b) & 0x80)) /* FIXME: do we test DIS_RDY(0x08) or RCV_EN(0x80)? */
-			break;
-
-		msleep(5);
-	}
-	if (time_after(jiffies, timeout)) {
-		result = -ETIMEDOUT;
-		goto exit;
-	}
-
-	/* check error flag - FIXME: not sure what this does - docs do not describe
-	 * beyond "error flag for diseqc receive data :( */
-	if (s5h1420_readreg(state, 0x49)) {
-		result = -EIO;
-		goto exit;
-	}
-
-	/* check length */
-	length = (s5h1420_readreg(state, 0x3b) & 0x70) >> 4;
-	if (length > sizeof(reply->msg)) {
-		result = -EOVERFLOW;
-		goto exit;
-	}
-	reply->msg_len = length;
-
-	/* extract data */
-	for(i=0; i< length; i++) {
-		reply->msg[i] = s5h1420_readreg(state, 0x3d + i);
-	}
-
-exit:
-	/* restore original settings */
-	s5h1420_writereg(state, 0x3b, val);
-	msleep(15);
-	return result;
-}
-
-static int s5h1420_send_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
-{
-	struct s5h1420_state* state = fe->demodulator_priv;
-	u8 val;
-	int result = 0;
-	unsigned long timeout;
-
-	/* setup for tone burst */
-	val = s5h1420_readreg(state, 0x3b);
-	s5h1420_writereg(state, 0x3b, (s5h1420_readreg(state, 0x3b) & 0x70) | 0x01);
-
-	/* set value for B position if requested */
-	if (minicmd == SEC_MINI_B) {
-		s5h1420_writereg(state, 0x3b, s5h1420_readreg(state, 0x3b) | 0x04);
-	}
-	msleep(15);
-
-	/* start transmission */
-	s5h1420_writereg(state, 0x3b, s5h1420_readreg(state, 0x3b) | 0x08);
-
-	/* wait for transmission to complete */
-	timeout = jiffies + ((100*HZ) / 1000);
-	while(time_before(jiffies, timeout)) {
-		if (!(s5h1420_readreg(state, 0x3b) & 0x08))
-			break;
-
-		msleep(5);
-	}
-	if (time_after(jiffies, timeout))
-		result = -ETIMEDOUT;
-
-	/* restore original settings */
-	s5h1420_writereg(state, 0x3b, val);
-	msleep(15);
-	return result;
-}
-
-static fe_status_t s5h1420_get_status_bits(struct s5h1420_state* state)
-{
-	u8 val;
-	fe_status_t status = 0;
-
-	val = s5h1420_readreg(state, 0x14);
-	if (val & 0x02)
-		status |=  FE_HAS_SIGNAL;
-	if (val & 0x01)
-		status |=  FE_HAS_CARRIER;
-	val = s5h1420_readreg(state, 0x36);
-	if (val & 0x01)
-		status |=  FE_HAS_VITERBI;
-	if (val & 0x20)
-		status |=  FE_HAS_SYNC;
-	if (status == (FE_HAS_SIGNAL|FE_HAS_CARRIER|FE_HAS_VITERBI|FE_HAS_SYNC))
-		status |=  FE_HAS_LOCK;
-
-	return status;
-}
-
-static int s5h1420_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct s5h1420_state* state = fe->demodulator_priv;
-	u8 val;
-
-	dprintk("enter %s\n", __func__);
-
-	if (status == NULL)
-		return -EINVAL;
-
-	/* determine lock state */
-	*status = s5h1420_get_status_bits(state);
-
-	/* fix for FEC 5/6 inversion issue - if it doesn't quite lock, invert
-	the inversion, wait a bit and check again */
-	if (*status == (FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI)) {
-		val = s5h1420_readreg(state, Vit10);
-		if ((val & 0x07) == 0x03) {
-			if (val & 0x08)
-				s5h1420_writereg(state, Vit09, 0x13);
-			else
-				s5h1420_writereg(state, Vit09, 0x1b);
-
-			/* wait a bit then update lock status */
-			mdelay(200);
-			*status = s5h1420_get_status_bits(state);
-		}
-	}
-
-	/* perform post lock setup */
-	if ((*status & FE_HAS_LOCK) && !state->postlocked) {
-
-		/* calculate the data rate */
-		u32 tmp = s5h1420_getsymbolrate(state);
-		switch (s5h1420_readreg(state, Vit10) & 0x07) {
-		case 0: tmp = (tmp * 2 * 1) / 2; break;
-		case 1: tmp = (tmp * 2 * 2) / 3; break;
-		case 2: tmp = (tmp * 2 * 3) / 4; break;
-		case 3: tmp = (tmp * 2 * 5) / 6; break;
-		case 4: tmp = (tmp * 2 * 6) / 7; break;
-		case 5: tmp = (tmp * 2 * 7) / 8; break;
-		}
-
-		if (tmp == 0) {
-			printk(KERN_ERR "s5h1420: avoided division by 0\n");
-			tmp = 1;
-		}
-		tmp = state->fclk / tmp;
-
-
-		/* set the MPEG_CLK_INTL for the calculated data rate */
-		if (tmp < 2)
-			val = 0x00;
-		else if (tmp < 5)
-			val = 0x01;
-		else if (tmp < 9)
-			val = 0x02;
-		else if (tmp < 13)
-			val = 0x03;
-		else if (tmp < 17)
-			val = 0x04;
-		else if (tmp < 25)
-			val = 0x05;
-		else if (tmp < 33)
-			val = 0x06;
-		else
-			val = 0x07;
-		dprintk("for MPEG_CLK_INTL %d %x\n", tmp, val);
-
-		s5h1420_writereg(state, FEC01, 0x18);
-		s5h1420_writereg(state, FEC01, 0x10);
-		s5h1420_writereg(state, FEC01, val);
-
-		/* Enable "MPEG_Out" */
-		val = s5h1420_readreg(state, Mpeg02);
-		s5h1420_writereg(state, Mpeg02, val | (1 << 6));
-
-		/* kicker disable */
-		val = s5h1420_readreg(state, QPSK01) & 0x7f;
-		s5h1420_writereg(state, QPSK01, val);
-
-		/* DC freeze TODO it was never activated by default or it can stay activated */
-
-		if (s5h1420_getsymbolrate(state) >= 20000000) {
-			s5h1420_writereg(state, Loop04, 0x8a);
-			s5h1420_writereg(state, Loop05, 0x6a);
-		} else {
-			s5h1420_writereg(state, Loop04, 0x58);
-			s5h1420_writereg(state, Loop05, 0x27);
-		}
-
-		/* post-lock processing has been done! */
-		state->postlocked = 1;
-	}
-
-	dprintk("leave %s\n", __func__);
-
-	return 0;
-}
-
-static int s5h1420_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct s5h1420_state* state = fe->demodulator_priv;
-
-	s5h1420_writereg(state, 0x46, 0x1d);
-	mdelay(25);
-
-	*ber = (s5h1420_readreg(state, 0x48) << 8) | s5h1420_readreg(state, 0x47);
-
-	return 0;
-}
-
-static int s5h1420_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	struct s5h1420_state* state = fe->demodulator_priv;
-
-	u8 val = s5h1420_readreg(state, 0x15);
-
-	*strength =  (u16) ((val << 8) | val);
-
-	return 0;
-}
-
-static int s5h1420_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct s5h1420_state* state = fe->demodulator_priv;
-
-	s5h1420_writereg(state, 0x46, 0x1f);
-	mdelay(25);
-
-	*ucblocks = (s5h1420_readreg(state, 0x48) << 8) | s5h1420_readreg(state, 0x47);
-
-	return 0;
-}
-
-static void s5h1420_reset(struct s5h1420_state* state)
-{
-	dprintk("%s\n", __func__);
-	s5h1420_writereg (state, 0x01, 0x08);
-	s5h1420_writereg (state, 0x01, 0x00);
-	udelay(10);
-}
-
-static void s5h1420_setsymbolrate(struct s5h1420_state* state,
-				  struct dtv_frontend_properties *p)
-{
-	u8 v;
-	u64 val;
-
-	dprintk("enter %s\n", __func__);
-
-	val = ((u64) p->symbol_rate / 1000ULL) * (1ULL<<24);
-	if (p->symbol_rate < 29000000)
-		val *= 2;
-	do_div(val, (state->fclk / 1000));
-
-	dprintk("symbol rate register: %06llx\n", (unsigned long long)val);
-
-	v = s5h1420_readreg(state, Loop01);
-	s5h1420_writereg(state, Loop01, v & 0x7f);
-	s5h1420_writereg(state, Tnco01, val >> 16);
-	s5h1420_writereg(state, Tnco02, val >> 8);
-	s5h1420_writereg(state, Tnco03, val & 0xff);
-	s5h1420_writereg(state, Loop01,  v | 0x80);
-	dprintk("leave %s\n", __func__);
-}
-
-static u32 s5h1420_getsymbolrate(struct s5h1420_state* state)
-{
-	return state->symbol_rate;
-}
-
-static void s5h1420_setfreqoffset(struct s5h1420_state* state, int freqoffset)
-{
-	int val;
-	u8 v;
-
-	dprintk("enter %s\n", __func__);
-
-	/* remember freqoffset is in kHz, but the chip wants the offset in Hz, so
-	 * divide fclk by 1000000 to get the correct value. */
-	val = -(int) ((freqoffset * (1<<24)) / (state->fclk / 1000000));
-
-	dprintk("phase rotator/freqoffset: %d %06x\n", freqoffset, val);
-
-	v = s5h1420_readreg(state, Loop01);
-	s5h1420_writereg(state, Loop01, v & 0xbf);
-	s5h1420_writereg(state, Pnco01, val >> 16);
-	s5h1420_writereg(state, Pnco02, val >> 8);
-	s5h1420_writereg(state, Pnco03, val & 0xff);
-	s5h1420_writereg(state, Loop01, v | 0x40);
-	dprintk("leave %s\n", __func__);
-}
-
-static int s5h1420_getfreqoffset(struct s5h1420_state* state)
-{
-	int val;
-
-	s5h1420_writereg(state, 0x06, s5h1420_readreg(state, 0x06) | 0x08);
-	val  = s5h1420_readreg(state, 0x0e) << 16;
-	val |= s5h1420_readreg(state, 0x0f) << 8;
-	val |= s5h1420_readreg(state, 0x10);
-	s5h1420_writereg(state, 0x06, s5h1420_readreg(state, 0x06) & 0xf7);
-
-	if (val & 0x800000)
-		val |= 0xff000000;
-
-	/* remember freqoffset is in kHz, but the chip wants the offset in Hz, so
-	 * divide fclk by 1000000 to get the correct value. */
-	val = (((-val) * (state->fclk/1000000)) / (1<<24));
-
-	return val;
-}
-
-static void s5h1420_setfec_inversion(struct s5h1420_state* state,
-				     struct dtv_frontend_properties *p)
-{
-	u8 inversion = 0;
-	u8 vit08, vit09;
-
-	dprintk("enter %s\n", __func__);
-
-	if (p->inversion == INVERSION_OFF)
-		inversion = state->config->invert ? 0x08 : 0;
-	else if (p->inversion == INVERSION_ON)
-		inversion = state->config->invert ? 0 : 0x08;
-
-	if ((p->fec_inner == FEC_AUTO) || (p->inversion == INVERSION_AUTO)) {
-		vit08 = 0x3f;
-		vit09 = 0;
-	} else {
-		switch (p->fec_inner) {
-		case FEC_1_2:
-			vit08 = 0x01; vit09 = 0x10;
-			break;
-
-		case FEC_2_3:
-			vit08 = 0x02; vit09 = 0x11;
-			break;
-
-		case FEC_3_4:
-			vit08 = 0x04; vit09 = 0x12;
-			break;
-
-		case FEC_5_6:
-			vit08 = 0x08; vit09 = 0x13;
-			break;
-
-		case FEC_6_7:
-			vit08 = 0x10; vit09 = 0x14;
-			break;
-
-		case FEC_7_8:
-			vit08 = 0x20; vit09 = 0x15;
-			break;
-
-		default:
-			return;
-		}
-	}
-	vit09 |= inversion;
-	dprintk("fec: %02x %02x\n", vit08, vit09);
-	s5h1420_writereg(state, Vit08, vit08);
-	s5h1420_writereg(state, Vit09, vit09);
-	dprintk("leave %s\n", __func__);
-}
-
-static fe_code_rate_t s5h1420_getfec(struct s5h1420_state* state)
-{
-	switch(s5h1420_readreg(state, 0x32) & 0x07) {
-	case 0:
-		return FEC_1_2;
-
-	case 1:
-		return FEC_2_3;
-
-	case 2:
-		return FEC_3_4;
-
-	case 3:
-		return FEC_5_6;
-
-	case 4:
-		return FEC_6_7;
-
-	case 5:
-		return FEC_7_8;
-	}
-
-	return FEC_NONE;
-}
-
-static fe_spectral_inversion_t s5h1420_getinversion(struct s5h1420_state* state)
-{
-	if (s5h1420_readreg(state, 0x32) & 0x08)
-		return INVERSION_ON;
-
-	return INVERSION_OFF;
-}
-
-static int s5h1420_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct s5h1420_state* state = fe->demodulator_priv;
-	int frequency_delta;
-	struct dvb_frontend_tune_settings fesettings;
-
-	dprintk("enter %s\n", __func__);
-
-	/* check if we should do a fast-tune */
-	s5h1420_get_tune_settings(fe, &fesettings);
-	frequency_delta = p->frequency - state->tunedfreq;
-	if ((frequency_delta > -fesettings.max_drift) &&
-			(frequency_delta < fesettings.max_drift) &&
-			(frequency_delta != 0) &&
-			(state->fec_inner == p->fec_inner) &&
-			(state->symbol_rate == p->symbol_rate)) {
-
-		if (fe->ops.tuner_ops.set_params) {
-			fe->ops.tuner_ops.set_params(fe);
-			if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-		}
-		if (fe->ops.tuner_ops.get_frequency) {
-			u32 tmp;
-			fe->ops.tuner_ops.get_frequency(fe, &tmp);
-			if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-			s5h1420_setfreqoffset(state, p->frequency - tmp);
-		} else {
-			s5h1420_setfreqoffset(state, 0);
-		}
-		dprintk("simple tune\n");
-		return 0;
-	}
-	dprintk("tuning demod\n");
-
-	/* first of all, software reset */
-	s5h1420_reset(state);
-
-	/* set s5h1420 fclk PLL according to desired symbol rate */
-	if (p->symbol_rate > 33000000)
-		state->fclk = 80000000;
-	else if (p->symbol_rate > 28500000)
-		state->fclk = 59000000;
-	else if (p->symbol_rate > 25000000)
-		state->fclk = 86000000;
-	else if (p->symbol_rate > 1900000)
-		state->fclk = 88000000;
-	else
-		state->fclk = 44000000;
-
-	dprintk("pll01: %d, ToneFreq: %d\n", state->fclk/1000000 - 8, (state->fclk + (TONE_FREQ * 32) - 1) / (TONE_FREQ * 32));
-	s5h1420_writereg(state, PLL01, state->fclk/1000000 - 8);
-	s5h1420_writereg(state, PLL02, 0x40);
-	s5h1420_writereg(state, DiS01, (state->fclk + (TONE_FREQ * 32) - 1) / (TONE_FREQ * 32));
-
-	/* TODO DC offset removal, config parameter ? */
-	if (p->symbol_rate > 29000000)
-		s5h1420_writereg(state, QPSK01, 0xae | 0x10);
-	else
-		s5h1420_writereg(state, QPSK01, 0xac | 0x10);
-
-	/* set misc registers */
-	s5h1420_writereg(state, CON_1, 0x00);
-	s5h1420_writereg(state, QPSK02, 0x00);
-	s5h1420_writereg(state, Pre01, 0xb0);
-
-	s5h1420_writereg(state, Loop01, 0xF0);
-	s5h1420_writereg(state, Loop02, 0x2a); /* e7 for s5h1420 */
-	s5h1420_writereg(state, Loop03, 0x79); /* 78 for s5h1420 */
-	if (p->symbol_rate > 20000000)
-		s5h1420_writereg(state, Loop04, 0x79);
-	else
-		s5h1420_writereg(state, Loop04, 0x58);
-	s5h1420_writereg(state, Loop05, 0x6b);
-
-	if (p->symbol_rate >= 8000000)
-		s5h1420_writereg(state, Post01, (0 << 6) | 0x10);
-	else if (p->symbol_rate >= 4000000)
-		s5h1420_writereg(state, Post01, (1 << 6) | 0x10);
-	else
-		s5h1420_writereg(state, Post01, (3 << 6) | 0x10);
-
-	s5h1420_writereg(state, Monitor12, 0x00); /* unfreeze DC compensation */
-
-	s5h1420_writereg(state, Sync01, 0x33);
-	s5h1420_writereg(state, Mpeg01, state->config->cdclk_polarity);
-	s5h1420_writereg(state, Mpeg02, 0x3d); /* Parallel output more, disabled -> enabled later */
-	s5h1420_writereg(state, Err01, 0x03); /* 0x1d for s5h1420 */
-
-	s5h1420_writereg(state, Vit06, 0x6e); /* 0x8e for s5h1420 */
-	s5h1420_writereg(state, DiS03, 0x00);
-	s5h1420_writereg(state, Rf01, 0x61); /* Tuner i2c address - for the gate controller */
-
-	/* set tuner PLL */
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-		s5h1420_setfreqoffset(state, 0);
-	}
-
-	/* set the reset of the parameters */
-	s5h1420_setsymbolrate(state, p);
-	s5h1420_setfec_inversion(state, p);
-
-	/* start QPSK */
-	s5h1420_writereg(state, QPSK01, s5h1420_readreg(state, QPSK01) | 1);
-
-	state->fec_inner = p->fec_inner;
-	state->symbol_rate = p->symbol_rate;
-	state->postlocked = 0;
-	state->tunedfreq = p->frequency;
-
-	dprintk("leave %s\n", __func__);
-	return 0;
-}
-
-static int s5h1420_get_frontend(struct dvb_frontend* fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct s5h1420_state* state = fe->demodulator_priv;
-
-	p->frequency = state->tunedfreq + s5h1420_getfreqoffset(state);
-	p->inversion = s5h1420_getinversion(state);
-	p->symbol_rate = s5h1420_getsymbolrate(state);
-	p->fec_inner = s5h1420_getfec(state);
-
-	return 0;
-}
-
-static int s5h1420_get_tune_settings(struct dvb_frontend* fe,
-				     struct dvb_frontend_tune_settings* fesettings)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	if (p->symbol_rate > 20000000) {
-		fesettings->min_delay_ms = 50;
-		fesettings->step_size = 2000;
-		fesettings->max_drift = 8000;
-	} else if (p->symbol_rate > 12000000) {
-		fesettings->min_delay_ms = 100;
-		fesettings->step_size = 1500;
-		fesettings->max_drift = 9000;
-	} else if (p->symbol_rate > 8000000) {
-		fesettings->min_delay_ms = 100;
-		fesettings->step_size = 1000;
-		fesettings->max_drift = 8000;
-	} else if (p->symbol_rate > 4000000) {
-		fesettings->min_delay_ms = 100;
-		fesettings->step_size = 500;
-		fesettings->max_drift = 7000;
-	} else if (p->symbol_rate > 2000000) {
-		fesettings->min_delay_ms = 200;
-		fesettings->step_size = (p->symbol_rate / 8000);
-		fesettings->max_drift = 14 * fesettings->step_size;
-	} else {
-		fesettings->min_delay_ms = 200;
-		fesettings->step_size = (p->symbol_rate / 8000);
-		fesettings->max_drift = 18 * fesettings->step_size;
-	}
-
-	return 0;
-}
-
-static int s5h1420_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
-{
-	struct s5h1420_state* state = fe->demodulator_priv;
-
-	if (enable)
-		return s5h1420_writereg(state, 0x02, state->CON_1_val | 1);
-	else
-		return s5h1420_writereg(state, 0x02, state->CON_1_val & 0xfe);
-}
-
-static int s5h1420_init (struct dvb_frontend* fe)
-{
-	struct s5h1420_state* state = fe->demodulator_priv;
-
-	/* disable power down and do reset */
-	state->CON_1_val = state->config->serial_mpeg << 4;
-	s5h1420_writereg(state, 0x02, state->CON_1_val);
-	msleep(10);
-	s5h1420_reset(state);
-
-	return 0;
-}
-
-static int s5h1420_sleep(struct dvb_frontend* fe)
-{
-	struct s5h1420_state* state = fe->demodulator_priv;
-	state->CON_1_val = 0x12;
-	return s5h1420_writereg(state, 0x02, state->CON_1_val);
-}
-
-static void s5h1420_release(struct dvb_frontend* fe)
-{
-	struct s5h1420_state* state = fe->demodulator_priv;
-	i2c_del_adapter(&state->tuner_i2c_adapter);
-	kfree(state);
-}
-
-static u32 s5h1420_tuner_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static int s5h1420_tuner_i2c_tuner_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num)
-{
-	struct s5h1420_state *state = i2c_get_adapdata(i2c_adap);
-	struct i2c_msg m[1 + num];
-	u8 tx_open[2] = { CON_1, state->CON_1_val | 1 }; /* repeater stops once there was a stop condition */
-
-	memset(m, 0, sizeof(struct i2c_msg) * (1 + num));
-
-	m[0].addr = state->config->demod_address;
-	m[0].buf  = tx_open;
-	m[0].len  = 2;
-
-	memcpy(&m[1], msg, sizeof(struct i2c_msg) * num);
-
-	return i2c_transfer(state->i2c, m, 1+num) == 1 + num ? num : -EIO;
-}
-
-static struct i2c_algorithm s5h1420_tuner_i2c_algo = {
-	.master_xfer   = s5h1420_tuner_i2c_tuner_xfer,
-	.functionality = s5h1420_tuner_i2c_func,
-};
-
-struct i2c_adapter *s5h1420_get_tuner_i2c_adapter(struct dvb_frontend *fe)
-{
-	struct s5h1420_state *state = fe->demodulator_priv;
-	return &state->tuner_i2c_adapter;
-}
-EXPORT_SYMBOL(s5h1420_get_tuner_i2c_adapter);
-
-static struct dvb_frontend_ops s5h1420_ops;
-
-struct dvb_frontend *s5h1420_attach(const struct s5h1420_config *config,
-				    struct i2c_adapter *i2c)
-{
-	/* allocate memory for the internal state */
-	struct s5h1420_state *state = kzalloc(sizeof(struct s5h1420_state), GFP_KERNEL);
-	u8 i;
-
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->postlocked = 0;
-	state->fclk = 88000000;
-	state->tunedfreq = 0;
-	state->fec_inner = FEC_NONE;
-	state->symbol_rate = 0;
-
-	/* check if the demod is there + identify it */
-	i = s5h1420_readreg(state, ID01);
-	if (i != 0x03)
-		goto error;
-
-	memset(state->shadow, 0xff, sizeof(state->shadow));
-
-	for (i = 0; i < 0x50; i++)
-		state->shadow[i] = s5h1420_readreg(state, i);
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &s5h1420_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-
-	/* create tuner i2c adapter */
-	strlcpy(state->tuner_i2c_adapter.name, "S5H1420-PN1010 tuner I2C bus",
-		sizeof(state->tuner_i2c_adapter.name));
-	state->tuner_i2c_adapter.algo      = &s5h1420_tuner_i2c_algo;
-	state->tuner_i2c_adapter.algo_data = NULL;
-	i2c_set_adapdata(&state->tuner_i2c_adapter, state);
-	if (i2c_add_adapter(&state->tuner_i2c_adapter) < 0) {
-		printk(KERN_ERR "S5H1420/PN1010: tuner i2c bus could not be initialized\n");
-		goto error;
-	}
-
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(s5h1420_attach);
-
-static struct dvb_frontend_ops s5h1420_ops = {
-	.delsys = { SYS_DVBS },
-	.info = {
-		.name     = "Samsung S5H1420/PnpNetwork PN1010 DVB-S",
-		.frequency_min    = 950000,
-		.frequency_max    = 2150000,
-		.frequency_stepsize = 125,     /* kHz for QPSK frontends */
-		.frequency_tolerance  = 29500,
-		.symbol_rate_min  = 1000000,
-		.symbol_rate_max  = 45000000,
-		/*  .symbol_rate_tolerance  = ???,*/
-		.caps = FE_CAN_INVERSION_AUTO |
-		FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-		FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-		FE_CAN_QPSK
-	},
-
-	.release = s5h1420_release,
-
-	.init = s5h1420_init,
-	.sleep = s5h1420_sleep,
-	.i2c_gate_ctrl = s5h1420_i2c_gate_ctrl,
-
-	.set_frontend = s5h1420_set_frontend,
-	.get_frontend = s5h1420_get_frontend,
-	.get_tune_settings = s5h1420_get_tune_settings,
-
-	.read_status = s5h1420_read_status,
-	.read_ber = s5h1420_read_ber,
-	.read_signal_strength = s5h1420_read_signal_strength,
-	.read_ucblocks = s5h1420_read_ucblocks,
-
-	.diseqc_send_master_cmd = s5h1420_send_master_cmd,
-	.diseqc_recv_slave_reply = s5h1420_recv_slave_reply,
-	.diseqc_send_burst = s5h1420_send_burst,
-	.set_tone = s5h1420_set_tone,
-	.set_voltage = s5h1420_set_voltage,
-};
-
-MODULE_DESCRIPTION("Samsung S5H1420/PnpNetwork PN1010 DVB-S Demodulator driver");
-MODULE_AUTHOR("Andrew de Quincey, Patrick Boettcher");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/s5h1420.h b/drivers/media/dvb/frontends/s5h1420.h
deleted file mode 100644
index ff30813..0000000
--- a/drivers/media/dvb/frontends/s5h1420.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Driver for
- *    Samsung S5H1420 and
- *    PnpNetwork PN1010 QPSK Demodulator
- *
- * Copyright (C) 2005 Andrew de Quincey <adq_dvb@lidskialf.net>
- * Copyright (C) 2005-8 Patrick Boettcher <pb@linuxtv.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef S5H1420_H
-#define S5H1420_H
-
-#include <linux/dvb/frontend.h>
-
-struct s5h1420_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* does the inversion require inversion? */
-	u8 invert:1;
-
-	u8 repeated_start_workaround:1;
-	u8 cdclk_polarity:1; /* 1 == falling edge, 0 == raising edge */
-
-	u8 serial_mpeg:1;
-};
-
-#if defined(CONFIG_DVB_S5H1420) || (defined(CONFIG_DVB_S5H1420_MODULE) && defined(MODULE))
-extern struct dvb_frontend *s5h1420_attach(const struct s5h1420_config *config,
-	     struct i2c_adapter *i2c);
-extern struct i2c_adapter *s5h1420_get_tuner_i2c_adapter(struct dvb_frontend *fe);
-#else
-static inline struct dvb_frontend *s5h1420_attach(const struct s5h1420_config *config,
-					   struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-static inline struct i2c_adapter *s5h1420_get_tuner_i2c_adapter(struct dvb_frontend *fe)
-{
-	return NULL;
-}
-#endif // CONFIG_DVB_S5H1420
-
-#endif // S5H1420_H
diff --git a/drivers/media/dvb/frontends/s5h1420_priv.h b/drivers/media/dvb/frontends/s5h1420_priv.h
deleted file mode 100644
index d9c58d2..0000000
--- a/drivers/media/dvb/frontends/s5h1420_priv.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Driver for
- *    Samsung S5H1420 and
- *    PnpNetwork PN1010 QPSK Demodulator
- *
- * Copyright (C) 2005 Andrew de Quincey <adq_dvb@lidskialf.net>
- * Copyright (C) 2005 Patrick Boettcher <pb@linuxtv.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 675 Mass
- * Ave, Cambridge, MA 02139, USA.
- */
-#ifndef S5H1420_PRIV
-#define S5H1420_PRIV
-
-#include <asm/types.h>
-
-enum s5h1420_register {
-	ID01      = 0x00,
-	CON_0     = 0x01,
-	CON_1     = 0x02,
-	PLL01     = 0x03,
-	PLL02     = 0x04,
-	QPSK01    = 0x05,
-	QPSK02    = 0x06,
-	Pre01     = 0x07,
-	Post01    = 0x08,
-	Loop01    = 0x09,
-	Loop02    = 0x0a,
-	Loop03    = 0x0b,
-	Loop04    = 0x0c,
-	Loop05    = 0x0d,
-	Pnco01    = 0x0e,
-	Pnco02    = 0x0f,
-	Pnco03    = 0x10,
-	Tnco01    = 0x11,
-	Tnco02    = 0x12,
-	Tnco03    = 0x13,
-	Monitor01 = 0x14,
-	Monitor02 = 0x15,
-	Monitor03 = 0x16,
-	Monitor04 = 0x17,
-	Monitor05 = 0x18,
-	Monitor06 = 0x19,
-	Monitor07 = 0x1a,
-	Monitor12 = 0x1f,
-
-	FEC01     = 0x22,
-	Soft01    = 0x23,
-	Soft02    = 0x24,
-	Soft03    = 0x25,
-	Soft04    = 0x26,
-	Soft05    = 0x27,
-	Soft06    = 0x28,
-	Vit01     = 0x29,
-	Vit02     = 0x2a,
-	Vit03     = 0x2b,
-	Vit04     = 0x2c,
-	Vit05     = 0x2d,
-	Vit06     = 0x2e,
-	Vit07     = 0x2f,
-	Vit08     = 0x30,
-	Vit09     = 0x31,
-	Vit10     = 0x32,
-	Vit11     = 0x33,
-	Vit12     = 0x34,
-	Sync01    = 0x35,
-	Sync02    = 0x36,
-	Rs01      = 0x37,
-	Mpeg01    = 0x38,
-	Mpeg02    = 0x39,
-	DiS01     = 0x3a,
-	DiS02     = 0x3b,
-	DiS03     = 0x3c,
-	DiS04     = 0x3d,
-	DiS05     = 0x3e,
-	DiS06     = 0x3f,
-	DiS07     = 0x40,
-	DiS08     = 0x41,
-	DiS09     = 0x42,
-	DiS10     = 0x43,
-	DiS11     = 0x44,
-	Rf01      = 0x45,
-	Err01     = 0x46,
-	Err02     = 0x47,
-	Err03     = 0x48,
-	Err04     = 0x49,
-};
-
-
-#endif
diff --git a/drivers/media/dvb/frontends/s5h1432.c b/drivers/media/dvb/frontends/s5h1432.c
deleted file mode 100644
index 8352ce1..0000000
--- a/drivers/media/dvb/frontends/s5h1432.c
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- *  Samsung s5h1432 DVB-T demodulator driver
- *
- *  Copyright (C) 2009 Bill Liu <Bill.Liu@Conexant.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include "dvb_frontend.h"
-#include "s5h1432.h"
-
-struct s5h1432_state {
-
-	struct i2c_adapter *i2c;
-
-	/* configuration settings */
-	const struct s5h1432_config *config;
-
-	struct dvb_frontend frontend;
-
-	fe_modulation_t current_modulation;
-	unsigned int first_tune:1;
-
-	u32 current_frequency;
-	int if_freq;
-
-	u8 inversion;
-};
-
-static int debug;
-
-#define dprintk(arg...) do {	\
-	if (debug)		\
-		printk(arg);	\
-	} while (0)
-
-static int s5h1432_writereg(struct s5h1432_state *state,
-			    u8 addr, u8 reg, u8 data)
-{
-	int ret;
-	u8 buf[] = { reg, data };
-
-	struct i2c_msg msg = {.addr = addr, .flags = 0, .buf = buf, .len = 2 };
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-
-	if (ret != 1)
-		printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, "
-		       "ret == %i)\n", __func__, addr, reg, data, ret);
-
-	return (ret != 1) ? -1 : 0;
-}
-
-static u8 s5h1432_readreg(struct s5h1432_state *state, u8 addr, u8 reg)
-{
-	int ret;
-	u8 b0[] = { reg };
-	u8 b1[] = { 0 };
-
-	struct i2c_msg msg[] = {
-		{.addr = addr, .flags = 0, .buf = b0, .len = 1},
-		{.addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 1}
-	};
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2)
-		printk(KERN_ERR "%s: readreg error (ret == %i)\n",
-		       __func__, ret);
-	return b1[0];
-}
-
-static int s5h1432_sleep(struct dvb_frontend *fe)
-{
-	return 0;
-}
-
-static int s5h1432_set_channel_bandwidth(struct dvb_frontend *fe,
-					 u32 bandwidth)
-{
-	struct s5h1432_state *state = fe->demodulator_priv;
-
-	u8 reg = 0;
-
-	/* Register [0x2E] bit 3:2 : 8MHz = 0; 7MHz = 1; 6MHz = 2 */
-	reg = s5h1432_readreg(state, S5H1432_I2C_TOP_ADDR, 0x2E);
-	reg &= ~(0x0C);
-	switch (bandwidth) {
-	case 6:
-		reg |= 0x08;
-		break;
-	case 7:
-		reg |= 0x04;
-		break;
-	case 8:
-		reg |= 0x00;
-		break;
-	default:
-		return 0;
-	}
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x2E, reg);
-	return 1;
-}
-
-static int s5h1432_set_IF(struct dvb_frontend *fe, u32 ifFreqHz)
-{
-	struct s5h1432_state *state = fe->demodulator_priv;
-
-	switch (ifFreqHz) {
-	case TAIWAN_HI_IF_FREQ_44_MHZ:
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x55);
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x55);
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0x15);
-		break;
-	case EUROPE_HI_IF_FREQ_36_MHZ:
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x00);
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x00);
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0x40);
-		break;
-	case IF_FREQ_6_MHZ:
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x00);
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x00);
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xe0);
-		break;
-	case IF_FREQ_3point3_MHZ:
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x66);
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x66);
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEE);
-		break;
-	case IF_FREQ_3point5_MHZ:
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x55);
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x55);
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xED);
-		break;
-	case IF_FREQ_4_MHZ:
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0xAA);
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0xAA);
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEA);
-		break;
-	default:
-		{
-			u32 value = 0;
-			value = (u32) (((48000 - (ifFreqHz / 1000)) * 512 *
-					(u32) 32768) / (48 * 1000));
-			printk(KERN_INFO
-			       "Default IFFreq %d :reg value = 0x%x\n",
-			       ifFreqHz, value);
-			s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4,
-					 (u8) value & 0xFF);
-			s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5,
-					 (u8) (value >> 8) & 0xFF);
-			s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7,
-					 (u8) (value >> 16) & 0xFF);
-			break;
-		}
-
-	}
-
-	return 1;
-}
-
-/* Talk to the demod, set the FEC, GUARD, QAM settings etc */
-static int s5h1432_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	u32 dvb_bandwidth = 8;
-	struct s5h1432_state *state = fe->demodulator_priv;
-
-	if (p->frequency == state->current_frequency) {
-		/*current_frequency = p->frequency; */
-		/*state->current_frequency = p->frequency; */
-	} else {
-		fe->ops.tuner_ops.set_params(fe);
-		msleep(300);
-		s5h1432_set_channel_bandwidth(fe, dvb_bandwidth);
-		switch (p->bandwidth_hz) {
-		case 6000000:
-			dvb_bandwidth = 6;
-			s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
-			break;
-		case 7000000:
-			dvb_bandwidth = 7;
-			s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
-			break;
-		case 8000000:
-			dvb_bandwidth = 8;
-			s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
-			break;
-		default:
-			return 0;
-		}
-		/*fe->ops.tuner_ops.set_params(fe); */
-/*Soft Reset chip*/
-		msleep(30);
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a);
-		msleep(30);
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b);
-
-		s5h1432_set_channel_bandwidth(fe, dvb_bandwidth);
-		switch (p->bandwidth_hz) {
-		case 6000000:
-			dvb_bandwidth = 6;
-			s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
-			break;
-		case 7000000:
-			dvb_bandwidth = 7;
-			s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
-			break;
-		case 8000000:
-			dvb_bandwidth = 8;
-			s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
-			break;
-		default:
-			return 0;
-		}
-		/*fe->ops.tuner_ops.set_params(fe); */
-		/*Soft Reset chip*/
-		msleep(30);
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a);
-		msleep(30);
-		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b);
-
-	}
-
-	state->current_frequency = p->frequency;
-
-	return 0;
-}
-
-static int s5h1432_init(struct dvb_frontend *fe)
-{
-	struct s5h1432_state *state = fe->demodulator_priv;
-
-	u8 reg = 0;
-	state->current_frequency = 0;
-	printk(KERN_INFO " s5h1432_init().\n");
-
-	/*Set VSB mode as default, this also does a soft reset */
-	/*Initialize registers */
-
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x04, 0xa8);
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x05, 0x01);
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x07, 0x70);
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x19, 0x80);
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1b, 0x9D);
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1c, 0x30);
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1d, 0x20);
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1e, 0x1B);
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x2e, 0x40);
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x42, 0x84);
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x50, 0x5a);
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x5a, 0xd3);
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x68, 0x50);
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xb8, 0x3c);
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xc4, 0x10);
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xcc, 0x9c);
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xDA, 0x00);
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe1, 0x94);
-	/* s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xf4, 0xa1); */
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xf9, 0x00);
-
-	/*For NXP tuner*/
-
-	/*Set 3.3MHz as default IF frequency */
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x66);
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x66);
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEE);
-	/* Set reg 0x1E to get the full dynamic range */
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1e, 0x31);
-
-	/* Mode setting in demod */
-	reg = s5h1432_readreg(state, S5H1432_I2C_TOP_ADDR, 0x42);
-	reg |= 0x80;
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x42, reg);
-	/* Serial mode */
-
-	/* Soft Reset chip */
-
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a);
-	msleep(30);
-	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b);
-
-
-	return 0;
-}
-
-static int s5h1432_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	return 0;
-}
-
-static int s5h1432_read_signal_strength(struct dvb_frontend *fe,
-					u16 *signal_strength)
-{
-	return 0;
-}
-
-static int s5h1432_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	return 0;
-}
-
-static int s5h1432_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-
-	return 0;
-}
-
-static int s5h1432_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	return 0;
-}
-
-static int s5h1432_get_tune_settings(struct dvb_frontend *fe,
-				     struct dvb_frontend_tune_settings *tune)
-{
-	return 0;
-}
-
-static void s5h1432_release(struct dvb_frontend *fe)
-{
-	struct s5h1432_state *state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops s5h1432_ops;
-
-struct dvb_frontend *s5h1432_attach(const struct s5h1432_config *config,
-				    struct i2c_adapter *i2c)
-{
-	struct s5h1432_state *state = NULL;
-
-	printk(KERN_INFO " Enter s5h1432_attach(). attach success!\n");
-	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct s5h1432_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->current_modulation = QAM_16;
-	state->inversion = state->config->inversion;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &s5h1432_ops,
-	       sizeof(struct dvb_frontend_ops));
-
-	state->frontend.demodulator_priv = state;
-
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(s5h1432_attach);
-
-static struct dvb_frontend_ops s5h1432_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		 .name = "Samsung s5h1432 DVB-T Frontend",
-		 .frequency_min = 177000000,
-		 .frequency_max = 858000000,
-		 .frequency_stepsize = 166666,
-		 .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-		 FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-		 FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-		 FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
-		 FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER},
-
-	.init = s5h1432_init,
-	.sleep = s5h1432_sleep,
-	.set_frontend = s5h1432_set_frontend,
-	.get_tune_settings = s5h1432_get_tune_settings,
-	.read_status = s5h1432_read_status,
-	.read_ber = s5h1432_read_ber,
-	.read_signal_strength = s5h1432_read_signal_strength,
-	.read_snr = s5h1432_read_snr,
-	.read_ucblocks = s5h1432_read_ucblocks,
-	.release = s5h1432_release,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Enable verbose debug messages");
-
-MODULE_DESCRIPTION("Samsung s5h1432 DVB-T Demodulator driver");
-MODULE_AUTHOR("Bill Liu");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/s5h1432.h b/drivers/media/dvb/frontends/s5h1432.h
deleted file mode 100644
index b57438c..0000000
--- a/drivers/media/dvb/frontends/s5h1432.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  Samsung s5h1432 VSB/QAM demodulator driver
- *
- *  Copyright (C) 2009 Bill Liu <Bill.Liu@Conexant.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef __S5H1432_H__
-#define __S5H1432_H__
-
-#include <linux/dvb/frontend.h>
-
-#define S5H1432_I2C_TOP_ADDR (0x02 >> 1)
-
-#define TAIWAN_HI_IF_FREQ_44_MHZ 44000000
-#define EUROPE_HI_IF_FREQ_36_MHZ 36000000
-#define IF_FREQ_6_MHZ             6000000
-#define IF_FREQ_3point3_MHZ       3300000
-#define IF_FREQ_3point5_MHZ       3500000
-#define IF_FREQ_4_MHZ             4000000
-
-struct s5h1432_config {
-
-	/* serial/parallel output */
-#define S5H1432_PARALLEL_OUTPUT 0
-#define S5H1432_SERIAL_OUTPUT   1
-	u8 output_mode;
-
-	/* GPIO Setting */
-#define S5H1432_GPIO_OFF 0
-#define S5H1432_GPIO_ON  1
-	u8 gpio;
-
-	/* MPEG signal timing */
-#define S5H1432_MPEGTIMING_CONTINOUS_INVERTING_CLOCK       0
-#define S5H1432_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK    1
-#define S5H1432_MPEGTIMING_NONCONTINOUS_INVERTING_CLOCK    2
-#define S5H1432_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK 3
-	u16 mpeg_timing;
-
-	/* IF Freq for QAM and VSB in KHz */
-#define S5H1432_IF_3250  3250
-#define S5H1432_IF_3500  3500
-#define S5H1432_IF_4000  4000
-#define S5H1432_IF_5380  5380
-#define S5H1432_IF_44000 44000
-#define S5H1432_VSB_IF_DEFAULT s5h1432_IF_44000
-#define S5H1432_QAM_IF_DEFAULT s5h1432_IF_44000
-	u16 qam_if;
-	u16 vsb_if;
-
-	/* Spectral Inversion */
-#define S5H1432_INVERSION_OFF 0
-#define S5H1432_INVERSION_ON  1
-	u8 inversion;
-
-	/* Return lock status based on tuner lock, or demod lock */
-#define S5H1432_TUNERLOCKING 0
-#define S5H1432_DEMODLOCKING 1
-	u8 status_mode;
-};
-
-#if defined(CONFIG_DVB_S5H1432) || \
-	(defined(CONFIG_DVB_S5H1432_MODULE) && defined(MODULE))
-extern struct dvb_frontend *s5h1432_attach(const struct s5h1432_config *config,
-					   struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *s5h1432_attach(const struct s5h1432_config
-						  *config,
-						  struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_s5h1432 */
-
-#endif /* __s5h1432_H__ */
diff --git a/drivers/media/dvb/frontends/s921.c b/drivers/media/dvb/frontends/s921.c
deleted file mode 100644
index cd2288c..0000000
--- a/drivers/media/dvb/frontends/s921.c
+++ /dev/null
@@ -1,549 +0,0 @@
-/*
- *   Sharp VA3A5JZ921 One Seg Broadcast Module driver
- *   This device is labeled as just S. 921 at the top of the frontend can
- *
- *   Copyright (C) 2009-2010 Mauro Carvalho Chehab <mchehab@redhat.com>
- *   Copyright (C) 2009-2010 Douglas Landgraf <dougsland@redhat.com>
- *
- *   Developed for Leadership SBTVD 1seg device sold in Brazil
- *
- *   Frontend module based on cx24123 driver, getting some info from
- *	the old s921 driver.
- *
- *   FIXME: Need to port to DVB v5.2 API
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License as
- *   published by the Free Software Foundation version 2.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *   General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <asm/div64.h>
-
-#include "dvb_frontend.h"
-#include "s921.h"
-
-static int debug = 1;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
-
-#define rc(args...)  do {						\
-	printk(KERN_ERR  "s921: " args);				\
-} while (0)
-
-#define dprintk(args...)						\
-	do {								\
-		if (debug) {						\
-			printk(KERN_DEBUG "s921: %s: ", __func__);	\
-			printk(args);					\
-		}							\
-	} while (0)
-
-struct s921_state {
-	struct i2c_adapter *i2c;
-	const struct s921_config *config;
-
-	struct dvb_frontend frontend;
-
-	/* The Demod can't easily provide these, we cache them */
-	u32 currentfreq;
-};
-
-/*
- * Various tuner defaults need to be established for a given frequency kHz.
- * fixme: The bounds on the bands do not match the doc in real life.
- * fixme: Some of them have been moved, other might need adjustment.
- */
-static struct s921_bandselect_val {
-	u32 freq_low;
-	u8  band_reg;
-} s921_bandselect[] = {
-	{         0, 0x7b },
-	{ 485140000, 0x5b },
-	{ 515140000, 0x3b },
-	{ 545140000, 0x1b },
-	{ 599140000, 0xfb },
-	{ 623140000, 0xdb },
-	{ 659140000, 0xbb },
-	{ 713140000, 0x9b },
-};
-
-struct regdata {
-	u8 reg;
-	u8 data;
-};
-
-static struct regdata s921_init[] = {
-	{ 0x01, 0x80 },		/* Probably, a reset sequence */
-	{ 0x01, 0x40 },
-	{ 0x01, 0x80 },
-	{ 0x01, 0x40 },
-
-	{ 0x02, 0x00 },
-	{ 0x03, 0x40 },
-	{ 0x04, 0x01 },
-	{ 0x05, 0x00 },
-	{ 0x06, 0x00 },
-	{ 0x07, 0x00 },
-	{ 0x08, 0x00 },
-	{ 0x09, 0x00 },
-	{ 0x0a, 0x00 },
-	{ 0x0b, 0x5a },
-	{ 0x0c, 0x00 },
-	{ 0x0d, 0x00 },
-	{ 0x0f, 0x00 },
-	{ 0x13, 0x1b },
-	{ 0x14, 0x80 },
-	{ 0x15, 0x40 },
-	{ 0x17, 0x70 },
-	{ 0x18, 0x01 },
-	{ 0x19, 0x12 },
-	{ 0x1a, 0x01 },
-	{ 0x1b, 0x12 },
-	{ 0x1c, 0xa0 },
-	{ 0x1d, 0x00 },
-	{ 0x1e, 0x0a },
-	{ 0x1f, 0x08 },
-	{ 0x20, 0x40 },
-	{ 0x21, 0xff },
-	{ 0x22, 0x4c },
-	{ 0x23, 0x4e },
-	{ 0x24, 0x4c },
-	{ 0x25, 0x00 },
-	{ 0x26, 0x00 },
-	{ 0x27, 0xf4 },
-	{ 0x28, 0x60 },
-	{ 0x29, 0x88 },
-	{ 0x2a, 0x40 },
-	{ 0x2b, 0x40 },
-	{ 0x2c, 0xff },
-	{ 0x2d, 0x00 },
-	{ 0x2e, 0xff },
-	{ 0x2f, 0x00 },
-	{ 0x30, 0x20 },
-	{ 0x31, 0x06 },
-	{ 0x32, 0x0c },
-	{ 0x34, 0x0f },
-	{ 0x37, 0xfe },
-	{ 0x38, 0x00 },
-	{ 0x39, 0x63 },
-	{ 0x3a, 0x10 },
-	{ 0x3b, 0x10 },
-	{ 0x47, 0x00 },
-	{ 0x49, 0xe5 },
-	{ 0x4b, 0x00 },
-	{ 0x50, 0xc0 },
-	{ 0x52, 0x20 },
-	{ 0x54, 0x5a },
-	{ 0x55, 0x5b },
-	{ 0x56, 0x40 },
-	{ 0x57, 0x70 },
-	{ 0x5c, 0x50 },
-	{ 0x5d, 0x00 },
-	{ 0x62, 0x17 },
-	{ 0x63, 0x2f },
-	{ 0x64, 0x6f },
-	{ 0x68, 0x00 },
-	{ 0x69, 0x89 },
-	{ 0x6a, 0x00 },
-	{ 0x6b, 0x00 },
-	{ 0x6c, 0x00 },
-	{ 0x6d, 0x00 },
-	{ 0x6e, 0x00 },
-	{ 0x70, 0x10 },
-	{ 0x71, 0x00 },
-	{ 0x75, 0x00 },
-	{ 0x76, 0x30 },
-	{ 0x77, 0x01 },
-	{ 0xaf, 0x00 },
-	{ 0xb0, 0xa0 },
-	{ 0xb2, 0x3d },
-	{ 0xb3, 0x25 },
-	{ 0xb4, 0x8b },
-	{ 0xb5, 0x4b },
-	{ 0xb6, 0x3f },
-	{ 0xb7, 0xff },
-	{ 0xb8, 0xff },
-	{ 0xb9, 0xfc },
-	{ 0xba, 0x00 },
-	{ 0xbb, 0x00 },
-	{ 0xbc, 0x00 },
-	{ 0xd0, 0x30 },
-	{ 0xe4, 0x84 },
-	{ 0xf0, 0x48 },
-	{ 0xf1, 0x19 },
-	{ 0xf2, 0x5a },
-	{ 0xf3, 0x8e },
-	{ 0xf4, 0x2d },
-	{ 0xf5, 0x07 },
-	{ 0xf6, 0x5a },
-	{ 0xf7, 0xba },
-	{ 0xf8, 0xd7 },
-};
-
-static struct regdata s921_prefreq[] = {
-	{ 0x47, 0x60 },
-	{ 0x68, 0x00 },
-	{ 0x69, 0x89 },
-	{ 0xf0, 0x48 },
-	{ 0xf1, 0x19 },
-};
-
-static struct regdata s921_postfreq[] = {
-	{ 0xf5, 0xae },
-	{ 0xf6, 0xb7 },
-	{ 0xf7, 0xba },
-	{ 0xf8, 0xd7 },
-	{ 0x68, 0x0a },
-	{ 0x69, 0x09 },
-};
-
-static int s921_i2c_writereg(struct s921_state *state,
-			     u8 i2c_addr, int reg, int data)
-{
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg = {
-		.addr = i2c_addr, .flags = 0, .buf = buf, .len = 2
-	};
-	int rc;
-
-	rc = i2c_transfer(state->i2c, &msg, 1);
-	if (rc != 1) {
-		printk("%s: writereg rcor(rc == %i, reg == 0x%02x,"
-			 " data == 0x%02x)\n", __func__, rc, reg, data);
-		return rc;
-	}
-
-	return 0;
-}
-
-static int s921_i2c_writeregdata(struct s921_state *state, u8 i2c_addr,
-				 struct regdata *rd, int size)
-{
-	int i, rc;
-
-	for (i = 0; i < size; i++) {
-		rc = s921_i2c_writereg(state, i2c_addr, rd[i].reg, rd[i].data);
-		if (rc < 0)
-			return rc;
-	}
-	return 0;
-}
-
-static int s921_i2c_readreg(struct s921_state *state, u8 i2c_addr, u8 reg)
-{
-	u8 val;
-	int rc;
-	struct i2c_msg msg[] = {
-		{ .addr = i2c_addr, .flags = 0, .buf = &reg, .len = 1 },
-		{ .addr = i2c_addr, .flags = I2C_M_RD, .buf = &val, .len = 1 }
-	};
-
-	rc = i2c_transfer(state->i2c, msg, 2);
-
-	if (rc != 2) {
-		rc("%s: reg=0x%x (rcor=%d)\n", __func__, reg, rc);
-		return rc;
-	}
-
-	return val;
-}
-
-#define s921_readreg(state, reg) \
-	s921_i2c_readreg(state, state->config->demod_address, reg)
-#define s921_writereg(state, reg, val) \
-	s921_i2c_writereg(state, state->config->demod_address, reg, val)
-#define s921_writeregdata(state, regdata) \
-	s921_i2c_writeregdata(state, state->config->demod_address, \
-	regdata, ARRAY_SIZE(regdata))
-
-static int s921_pll_tune(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct s921_state *state = fe->demodulator_priv;
-	int band, rc, i;
-	unsigned long f_offset;
-	u8 f_switch;
-	u64 offset;
-
-	dprintk("frequency=%i\n", p->frequency);
-
-	for (band = 0; band < ARRAY_SIZE(s921_bandselect); band++)
-		if (p->frequency < s921_bandselect[band].freq_low)
-			break;
-	band--;
-
-	if (band < 0) {
-		rc("%s: frequency out of range\n", __func__);
-		return -EINVAL;
-	}
-
-	f_switch = s921_bandselect[band].band_reg;
-
-	offset = ((u64)p->frequency) * 258;
-	do_div(offset, 6000000);
-	f_offset = ((unsigned long)offset) + 2321;
-
-	rc = s921_writeregdata(state, s921_prefreq);
-	if (rc < 0)
-		return rc;
-
-	rc = s921_writereg(state, 0xf2, (f_offset >> 8) & 0xff);
-	if (rc < 0)
-		return rc;
-
-	rc = s921_writereg(state, 0xf3, f_offset & 0xff);
-	if (rc < 0)
-		return rc;
-
-	rc = s921_writereg(state, 0xf4, f_switch);
-	if (rc < 0)
-		return rc;
-
-	rc = s921_writeregdata(state, s921_postfreq);
-	if (rc < 0)
-		return rc;
-
-	for (i = 0 ; i < 6; i++) {
-		rc = s921_readreg(state, 0x80);
-		dprintk("status 0x80: %02x\n", rc);
-	}
-	rc = s921_writereg(state, 0x01, 0x40);
-	if (rc < 0)
-		return rc;
-
-	rc = s921_readreg(state, 0x01);
-	dprintk("status 0x01: %02x\n", rc);
-
-	rc = s921_readreg(state, 0x80);
-	dprintk("status 0x80: %02x\n", rc);
-
-	rc = s921_readreg(state, 0x80);
-	dprintk("status 0x80: %02x\n", rc);
-
-	rc = s921_readreg(state, 0x32);
-	dprintk("status 0x32: %02x\n", rc);
-
-	dprintk("pll tune band=%d, pll=%d\n", f_switch, (int)f_offset);
-
-	return 0;
-}
-
-static int s921_initfe(struct dvb_frontend *fe)
-{
-	struct s921_state *state = fe->demodulator_priv;
-	int rc;
-
-	dprintk("\n");
-
-	rc = s921_writeregdata(state, s921_init);
-	if (rc < 0)
-		return rc;
-
-	return 0;
-}
-
-static int s921_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct s921_state *state = fe->demodulator_priv;
-	int regstatus, rc;
-
-	*status = 0;
-
-	rc = s921_readreg(state, 0x81);
-	if (rc < 0)
-		return rc;
-
-	regstatus = rc << 8;
-
-	rc = s921_readreg(state, 0x82);
-	if (rc < 0)
-		return rc;
-
-	regstatus |= rc;
-
-	dprintk("status = %04x\n", regstatus);
-
-	/* Full Sync - We don't know what each bit means on regs 0x81/0x82 */
-	if ((regstatus & 0xff) == 0x40) {
-		*status = FE_HAS_SIGNAL  |
-			  FE_HAS_CARRIER |
-			  FE_HAS_VITERBI |
-			  FE_HAS_SYNC    |
-			  FE_HAS_LOCK;
-	} else if (regstatus & 0x40) {
-		/* This is close to Full Sync, but not enough to get useful info */
-		*status = FE_HAS_SIGNAL  |
-			  FE_HAS_CARRIER |
-			  FE_HAS_VITERBI |
-			  FE_HAS_SYNC;
-	}
-
-	return 0;
-}
-
-static int s921_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	fe_status_t	status;
-	struct s921_state *state = fe->demodulator_priv;
-	int rc;
-
-	/* FIXME: Use the proper register for it... 0x80? */
-	rc = s921_read_status(fe, &status);
-	if (rc < 0)
-		return rc;
-
-	*strength = (status & FE_HAS_LOCK) ? 0xffff : 0;
-
-	dprintk("strength = 0x%04x\n", *strength);
-
-	rc = s921_readreg(state, 0x01);
-	dprintk("status 0x01: %02x\n", rc);
-
-	rc = s921_readreg(state, 0x80);
-	dprintk("status 0x80: %02x\n", rc);
-
-	rc = s921_readreg(state, 0x32);
-	dprintk("status 0x32: %02x\n", rc);
-
-	return 0;
-}
-
-static int s921_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct s921_state *state = fe->demodulator_priv;
-	int rc;
-
-	dprintk("\n");
-
-	/* FIXME: We don't know how to use non-auto mode */
-
-	rc = s921_pll_tune(fe);
-	if (rc < 0)
-		return rc;
-
-	state->currentfreq = p->frequency;
-
-	return 0;
-}
-
-static int s921_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct s921_state *state = fe->demodulator_priv;
-
-	/* FIXME: Probably it is possible to get it from regs f1 and f2 */
-	p->frequency = state->currentfreq;
-	p->delivery_system = SYS_ISDBT;
-
-	return 0;
-}
-
-static int s921_tune(struct dvb_frontend *fe,
-			bool re_tune,
-			unsigned int mode_flags,
-			unsigned int *delay,
-			fe_status_t *status)
-{
-	int rc = 0;
-
-	dprintk("\n");
-
-	if (re_tune)
-		rc = s921_set_frontend(fe);
-
-	if (!(mode_flags & FE_TUNE_MODE_ONESHOT))
-		s921_read_status(fe, status);
-
-	return rc;
-}
-
-static int s921_get_algo(struct dvb_frontend *fe)
-{
-	return 1; /* FE_ALGO_HW */
-}
-
-static void s921_release(struct dvb_frontend *fe)
-{
-	struct s921_state *state = fe->demodulator_priv;
-
-	dprintk("\n");
-	kfree(state);
-}
-
-static struct dvb_frontend_ops s921_ops;
-
-struct dvb_frontend *s921_attach(const struct s921_config *config,
-				    struct i2c_adapter *i2c)
-{
-	/* allocate memory for the internal state */
-	struct s921_state *state =
-		kzalloc(sizeof(struct s921_state), GFP_KERNEL);
-
-	dprintk("\n");
-	if (state == NULL) {
-		rc("Unable to kzalloc\n");
-		goto rcor;
-	}
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &s921_ops,
-		sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-
-	return &state->frontend;
-
-rcor:
-	kfree(state);
-
-	return NULL;
-}
-EXPORT_SYMBOL(s921_attach);
-
-static struct dvb_frontend_ops s921_ops = {
-	.delsys = { SYS_ISDBT },
-	/* Use dib8000 values per default */
-	.info = {
-		.name = "Sharp S921",
-		.frequency_min = 470000000,
-		/*
-		 * Max should be 770MHz instead, according with Sharp docs,
-		 * but Leadership doc says it works up to 806 MHz. This is
-		 * required to get channel 69, used in Brazil
-		 */
-		.frequency_max = 806000000,
-		.frequency_tolerance = 0,
-		 .caps = FE_CAN_INVERSION_AUTO |
-			 FE_CAN_FEC_1_2  | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			 FE_CAN_FEC_5_6  | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			 FE_CAN_QPSK     | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
-			 FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO |
-			 FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER |
-			 FE_CAN_HIERARCHY_AUTO,
-	},
-
-	.release = s921_release,
-
-	.init = s921_initfe,
-	.set_frontend = s921_set_frontend,
-	.get_frontend = s921_get_frontend,
-	.read_status = s921_read_status,
-	.read_signal_strength = s921_read_signal_strength,
-	.tune = s921_tune,
-	.get_frontend_algo = s921_get_algo,
-};
-
-MODULE_DESCRIPTION("DVB Frontend module for Sharp S921 hardware");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
-MODULE_AUTHOR("Douglas Landgraf <dougsland@redhat.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/s921.h b/drivers/media/dvb/frontends/s921.h
deleted file mode 100644
index f220d82..0000000
--- a/drivers/media/dvb/frontends/s921.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- *   Sharp s921 driver
- *
- *   Copyright (C) 2009 Mauro Carvalho Chehab <mchehab@redhat.com>
- *   Copyright (C) 2009 Douglas Landgraf <dougsland@redhat.com>
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License as
- *   published by the Free Software Foundation version 2.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *   General Public License for more details.
- */
-
-#ifndef S921_H
-#define S921_H
-
-#include <linux/dvb/frontend.h>
-
-struct s921_config {
-	/* the demodulator's i2c address */
-	u8 demod_address;
-};
-
-#if defined(CONFIG_DVB_S921) || (defined(CONFIG_DVB_S921_MODULE) \
-	&& defined(MODULE))
-extern struct dvb_frontend *s921_attach(const struct s921_config *config,
-					   struct i2c_adapter *i2c);
-extern struct i2c_adapter *s921_get_tuner_i2c_adapter(struct dvb_frontend *);
-#else
-static inline struct dvb_frontend *s921_attach(
-	const struct s921_config *config, struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-static struct i2c_adapter *
-	s921_get_tuner_i2c_adapter(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif /* S921_H */
diff --git a/drivers/media/dvb/frontends/si21xx.c b/drivers/media/dvb/frontends/si21xx.c
deleted file mode 100644
index a68a648..0000000
--- a/drivers/media/dvb/frontends/si21xx.c
+++ /dev/null
@@ -1,951 +0,0 @@
-/* DVB compliant Linux driver for the DVB-S si2109/2110 demodulator
-*
-* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
-*
-*	This program is free software; you can redistribute it and/or modify
-*	it under the terms of the GNU General Public License as published by
-*	the Free Software Foundation; either version 2 of the License, or
-*	(at your option) any later version.
-*
-*/
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <asm/div64.h>
-
-#include "dvb_frontend.h"
-#include "si21xx.h"
-
-#define	REVISION_REG			0x00
-#define	SYSTEM_MODE_REG			0x01
-#define	TS_CTRL_REG_1			0x02
-#define	TS_CTRL_REG_2			0x03
-#define	PIN_CTRL_REG_1			0x04
-#define	PIN_CTRL_REG_2			0x05
-#define	LOCK_STATUS_REG_1		0x0f
-#define	LOCK_STATUS_REG_2		0x10
-#define	ACQ_STATUS_REG			0x11
-#define	ACQ_CTRL_REG_1			0x13
-#define	ACQ_CTRL_REG_2			0x14
-#define	PLL_DIVISOR_REG			0x15
-#define	COARSE_TUNE_REG			0x16
-#define	FINE_TUNE_REG_L			0x17
-#define	FINE_TUNE_REG_H			0x18
-
-#define	ANALOG_AGC_POWER_LEVEL_REG	0x28
-#define	CFO_ESTIMATOR_CTRL_REG_1	0x29
-#define	CFO_ESTIMATOR_CTRL_REG_2	0x2a
-#define	CFO_ESTIMATOR_CTRL_REG_3	0x2b
-
-#define	SYM_RATE_ESTIMATE_REG_L		0x31
-#define	SYM_RATE_ESTIMATE_REG_M		0x32
-#define	SYM_RATE_ESTIMATE_REG_H		0x33
-
-#define	CFO_ESTIMATOR_OFFSET_REG_L	0x36
-#define	CFO_ESTIMATOR_OFFSET_REG_H	0x37
-#define	CFO_ERROR_REG_L			0x38
-#define	CFO_ERROR_REG_H			0x39
-#define	SYM_RATE_ESTIMATOR_CTRL_REG	0x3a
-
-#define	SYM_RATE_REG_L			0x3f
-#define	SYM_RATE_REG_M			0x40
-#define	SYM_RATE_REG_H			0x41
-#define	SYM_RATE_ESTIMATOR_MAXIMUM_REG	0x42
-#define	SYM_RATE_ESTIMATOR_MINIMUM_REG	0x43
-
-#define	C_N_ESTIMATOR_CTRL_REG		0x7c
-#define	C_N_ESTIMATOR_THRSHLD_REG	0x7d
-#define	C_N_ESTIMATOR_LEVEL_REG_L	0x7e
-#define	C_N_ESTIMATOR_LEVEL_REG_H	0x7f
-
-#define	BLIND_SCAN_CTRL_REG		0x80
-
-#define	LSA_CTRL_REG_1			0x8D
-#define	SPCTRM_TILT_CORR_THRSHLD_REG	0x8f
-#define	ONE_DB_BNDWDTH_THRSHLD_REG	0x90
-#define	TWO_DB_BNDWDTH_THRSHLD_REG	0x91
-#define	THREE_DB_BNDWDTH_THRSHLD_REG	0x92
-#define	INBAND_POWER_THRSHLD_REG	0x93
-#define	REF_NOISE_LVL_MRGN_THRSHLD_REG	0x94
-
-#define	VIT_SRCH_CTRL_REG_1		0xa0
-#define	VIT_SRCH_CTRL_REG_2		0xa1
-#define	VIT_SRCH_CTRL_REG_3		0xa2
-#define	VIT_SRCH_STATUS_REG		0xa3
-#define	VITERBI_BER_COUNT_REG_L		0xab
-#define	REED_SOLOMON_CTRL_REG		0xb0
-#define	REED_SOLOMON_ERROR_COUNT_REG_L	0xb1
-#define	PRBS_CTRL_REG			0xb5
-
-#define	LNB_CTRL_REG_1			0xc0
-#define	LNB_CTRL_REG_2			0xc1
-#define	LNB_CTRL_REG_3			0xc2
-#define	LNB_CTRL_REG_4			0xc3
-#define	LNB_CTRL_STATUS_REG		0xc4
-#define	LNB_FIFO_REGS_0			0xc5
-#define	LNB_FIFO_REGS_1			0xc6
-#define	LNB_FIFO_REGS_2			0xc7
-#define	LNB_FIFO_REGS_3			0xc8
-#define	LNB_FIFO_REGS_4			0xc9
-#define	LNB_FIFO_REGS_5			0xca
-#define	LNB_SUPPLY_CTRL_REG_1		0xcb
-#define	LNB_SUPPLY_CTRL_REG_2		0xcc
-#define	LNB_SUPPLY_CTRL_REG_3		0xcd
-#define	LNB_SUPPLY_CTRL_REG_4		0xce
-#define	LNB_SUPPLY_STATUS_REG		0xcf
-
-#define FAIL	-1
-#define PASS	0
-
-#define ALLOWABLE_FS_COUNT	10
-#define STATUS_BER		0
-#define STATUS_UCBLOCKS		1
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) \
-			printk(KERN_DEBUG "si21xx: " args); \
-	} while (0)
-
-enum {
-	ACTIVE_HIGH,
-	ACTIVE_LOW
-};
-enum {
-	BYTE_WIDE,
-	BIT_WIDE
-};
-enum {
-	CLK_GAPPED_MODE,
-	CLK_CONTINUOUS_MODE
-};
-enum {
-	RISING_EDGE,
-	FALLING_EDGE
-};
-enum {
-	MSB_FIRST,
-	LSB_FIRST
-};
-enum {
-	SERIAL,
-	PARALLEL
-};
-
-struct si21xx_state {
-	struct i2c_adapter *i2c;
-	const struct si21xx_config *config;
-	struct dvb_frontend frontend;
-	u8 initialised:1;
-	int errmode;
-	int fs;			/*Sampling rate of the ADC in MHz*/
-};
-
-/*	register default initialization */
-static u8 serit_sp1511lhb_inittab[] = {
-	0x01, 0x28,	/* set i2c_inc_disable */
-	0x20, 0x03,
-	0x27, 0x20,
-	0xe0, 0x45,
-	0xe1, 0x08,
-	0xfe, 0x01,
-	0x01, 0x28,
-	0x89, 0x09,
-	0x04, 0x80,
-	0x05, 0x01,
-	0x06, 0x00,
-	0x20, 0x03,
-	0x24, 0x88,
-	0x29, 0x09,
-	0x2a, 0x0f,
-	0x2c, 0x10,
-	0x2d, 0x19,
-	0x2e, 0x08,
-	0x2f, 0x10,
-	0x30, 0x19,
-	0x34, 0x20,
-	0x35, 0x03,
-	0x45, 0x02,
-	0x46, 0x45,
-	0x47, 0xd0,
-	0x48, 0x00,
-	0x49, 0x40,
-	0x4a, 0x03,
-	0x4c, 0xfd,
-	0x4f, 0x2e,
-	0x50, 0x2e,
-	0x51, 0x10,
-	0x52, 0x10,
-	0x56, 0x92,
-	0x59, 0x00,
-	0x5a, 0x2d,
-	0x5b, 0x33,
-	0x5c, 0x1f,
-	0x5f, 0x76,
-	0x62, 0xc0,
-	0x63, 0xc0,
-	0x64, 0xf3,
-	0x65, 0xf3,
-	0x79, 0x40,
-	0x6a, 0x40,
-	0x6b, 0x0a,
-	0x6c, 0x80,
-	0x6d, 0x27,
-	0x71, 0x06,
-	0x75, 0x60,
-	0x78, 0x00,
-	0x79, 0xb5,
-	0x7c, 0x05,
-	0x7d, 0x1a,
-	0x87, 0x55,
-	0x88, 0x72,
-	0x8f, 0x08,
-	0x90, 0xe0,
-	0x94, 0x40,
-	0xa0, 0x3f,
-	0xa1, 0xc0,
-	0xa4, 0xcc,
-	0xa5, 0x66,
-	0xa6, 0x66,
-	0xa7, 0x7b,
-	0xa8, 0x7b,
-	0xa9, 0x7b,
-	0xaa, 0x9a,
-	0xed, 0x04,
-	0xad, 0x00,
-	0xae, 0x03,
-	0xcc, 0xab,
-	0x01, 0x08,
-	0xff, 0xff
-};
-
-/*	low level read/writes */
-static int si21_writeregs(struct si21xx_state *state, u8 reg1,
-							u8 *data, int len)
-{
-	int ret;
-	u8 buf[60];/* = { reg1, data };*/
-	struct i2c_msg msg = {
-				.addr = state->config->demod_address,
-				.flags = 0,
-				.buf = buf,
-				.len = len + 1
-	};
-
-	msg.buf[0] =  reg1;
-	memcpy(msg.buf + 1, data, len);
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-
-	if (ret != 1)
-		dprintk("%s: writereg error (reg1 == 0x%02x, data == 0x%02x, "
-			"ret == %i)\n", __func__, reg1, data[0], ret);
-
-	return (ret != 1) ? -EREMOTEIO : 0;
-}
-
-static int si21_writereg(struct si21xx_state *state, u8 reg, u8 data)
-{
-	int ret;
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg = {
-				.addr = state->config->demod_address,
-				.flags = 0,
-				.buf = buf,
-				.len = 2
-	};
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-
-	if (ret != 1)
-		dprintk("%s: writereg error (reg == 0x%02x, data == 0x%02x, "
-			"ret == %i)\n", __func__, reg, data, ret);
-
-	return (ret != 1) ? -EREMOTEIO : 0;
-}
-
-static int si21_write(struct dvb_frontend *fe, const u8 buf[], int len)
-{
-	struct si21xx_state *state = fe->demodulator_priv;
-
-	if (len != 2)
-		return -EINVAL;
-
-	return si21_writereg(state, buf[0], buf[1]);
-}
-
-static u8 si21_readreg(struct si21xx_state *state, u8 reg)
-{
-	int ret;
-	u8 b0[] = { reg };
-	u8 b1[] = { 0 };
-	struct i2c_msg msg[] = {
-		{
-			.addr = state->config->demod_address,
-			.flags = 0,
-			.buf = b0,
-			.len = 1
-		}, {
-			.addr = state->config->demod_address,
-			.flags = I2C_M_RD,
-			.buf = b1,
-			.len = 1
-		}
-	};
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2)
-		dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n",
-			__func__, reg, ret);
-
-	return b1[0];
-}
-
-static int si21_readregs(struct si21xx_state *state, u8 reg1, u8 *b, u8 len)
-{
-	int ret;
-	struct i2c_msg msg[] = {
-		{
-			.addr = state->config->demod_address,
-			.flags = 0,
-			.buf = &reg1,
-			.len = 1
-		}, {
-			.addr = state->config->demod_address,
-			.flags = I2C_M_RD,
-			.buf = b,
-			.len = len
-		}
-	};
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2)
-		dprintk("%s: readreg error (ret == %i)\n", __func__, ret);
-
-	return ret == 2 ? 0 : -1;
-}
-
-static int si21xx_wait_diseqc_idle(struct si21xx_state *state, int timeout)
-{
-	unsigned long start = jiffies;
-
-	dprintk("%s\n", __func__);
-
-	while ((si21_readreg(state, LNB_CTRL_REG_1) & 0x8) == 8) {
-		if (jiffies - start > timeout) {
-			dprintk("%s: timeout!!\n", __func__);
-			return -ETIMEDOUT;
-		}
-		msleep(10);
-	};
-
-	return 0;
-}
-
-static int si21xx_set_symbolrate(struct dvb_frontend *fe, u32 srate)
-{
-	struct si21xx_state *state = fe->demodulator_priv;
-	u32 sym_rate, data_rate;
-	int i;
-	u8 sym_rate_bytes[3];
-
-	dprintk("%s : srate = %i\n", __func__ , srate);
-
-	if ((srate < 1000000) || (srate > 45000000))
-		return -EINVAL;
-
-	data_rate = srate;
-	sym_rate = 0;
-
-	for (i = 0; i < 4; ++i) {
-		sym_rate /= 100;
-		sym_rate = sym_rate + ((data_rate % 100) * 0x800000) /
-								state->fs;
-		data_rate /= 100;
-	}
-	for (i = 0; i < 3; ++i)
-		sym_rate_bytes[i] = (u8)((sym_rate >> (i * 8)) & 0xff);
-
-	si21_writeregs(state, SYM_RATE_REG_L, sym_rate_bytes, 0x03);
-
-	return 0;
-}
-
-static int si21xx_send_diseqc_msg(struct dvb_frontend *fe,
-					struct dvb_diseqc_master_cmd *m)
-{
-	struct si21xx_state *state = fe->demodulator_priv;
-	u8 lnb_status;
-	u8 LNB_CTRL_1;
-	int status;
-
-	dprintk("%s\n", __func__);
-
-	status = PASS;
-	LNB_CTRL_1 = 0;
-
-	status |= si21_readregs(state, LNB_CTRL_STATUS_REG, &lnb_status, 0x01);
-	status |= si21_readregs(state, LNB_CTRL_REG_1, &lnb_status, 0x01);
-
-	/*fill the FIFO*/
-	status |= si21_writeregs(state, LNB_FIFO_REGS_0, m->msg, m->msg_len);
-
-	LNB_CTRL_1 = (lnb_status & 0x70);
-	LNB_CTRL_1 |= m->msg_len;
-
-	LNB_CTRL_1 |= 0x80;	/* begin LNB signaling */
-
-	status |= si21_writeregs(state, LNB_CTRL_REG_1, &LNB_CTRL_1, 0x01);
-
-	return status;
-}
-
-static int si21xx_send_diseqc_burst(struct dvb_frontend *fe,
-						fe_sec_mini_cmd_t burst)
-{
-	struct si21xx_state *state = fe->demodulator_priv;
-	u8 val;
-
-	dprintk("%s\n", __func__);
-
-	if (si21xx_wait_diseqc_idle(state, 100) < 0)
-		return -ETIMEDOUT;
-
-	val = (0x80 | si21_readreg(state, 0xc1));
-	if (si21_writereg(state, LNB_CTRL_REG_1,
-			burst == SEC_MINI_A ? (val & ~0x10) : (val | 0x10)))
-		return -EREMOTEIO;
-
-	if (si21xx_wait_diseqc_idle(state, 100) < 0)
-		return -ETIMEDOUT;
-
-	if (si21_writereg(state, LNB_CTRL_REG_1, val))
-		return -EREMOTEIO;
-
-	return 0;
-}
-/*	30.06.2008 */
-static int si21xx_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
-{
-	struct si21xx_state *state = fe->demodulator_priv;
-	u8 val;
-
-	dprintk("%s\n", __func__);
-	val = (0x80 | si21_readreg(state, LNB_CTRL_REG_1));
-
-	switch (tone) {
-	case SEC_TONE_ON:
-		return si21_writereg(state, LNB_CTRL_REG_1, val | 0x20);
-
-	case SEC_TONE_OFF:
-		return si21_writereg(state, LNB_CTRL_REG_1, (val & ~0x20));
-
-	default:
-		return -EINVAL;
-	}
-}
-
-static int si21xx_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t volt)
-{
-	struct si21xx_state *state = fe->demodulator_priv;
-
-	u8 val;
-	dprintk("%s: %s\n", __func__,
-		volt == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" :
-		volt == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : "??");
-
-
-	val = (0x80 | si21_readreg(state, LNB_CTRL_REG_1));
-
-	switch (volt) {
-	case SEC_VOLTAGE_18:
-		return si21_writereg(state, LNB_CTRL_REG_1, val | 0x40);
-		break;
-	case SEC_VOLTAGE_13:
-		return si21_writereg(state, LNB_CTRL_REG_1, (val & ~0x40));
-		break;
-	default:
-		return -EINVAL;
-	};
-}
-
-static int si21xx_init(struct dvb_frontend *fe)
-{
-	struct si21xx_state *state = fe->demodulator_priv;
-	int i;
-	int status = 0;
-	u8 reg1;
-	u8 val;
-	u8 reg2[2];
-
-	dprintk("%s\n", __func__);
-
-	for (i = 0; ; i += 2) {
-		reg1 = serit_sp1511lhb_inittab[i];
-		val = serit_sp1511lhb_inittab[i+1];
-		if (reg1 == 0xff && val == 0xff)
-			break;
-		si21_writeregs(state, reg1, &val, 1);
-	}
-
-	/*DVB QPSK SYSTEM MODE REG*/
-	reg1 = 0x08;
-	si21_writeregs(state, SYSTEM_MODE_REG, &reg1, 0x01);
-
-	/*transport stream config*/
-	/*
-	mode = PARALLEL;
-	sdata_form = LSB_FIRST;
-	clk_edge = FALLING_EDGE;
-	clk_mode = CLK_GAPPED_MODE;
-	strt_len = BYTE_WIDE;
-	sync_pol = ACTIVE_HIGH;
-	val_pol = ACTIVE_HIGH;
-	err_pol = ACTIVE_HIGH;
-	sclk_rate = 0x00;
-	parity = 0x00 ;
-	data_delay = 0x00;
-	clk_delay = 0x00;
-	pclk_smooth = 0x00;
-	*/
-	reg2[0] =
-		PARALLEL + (LSB_FIRST << 1)
-		+ (FALLING_EDGE << 2) + (CLK_GAPPED_MODE << 3)
-		+ (BYTE_WIDE << 4) + (ACTIVE_HIGH << 5)
-		+ (ACTIVE_HIGH << 6) + (ACTIVE_HIGH << 7);
-
-	reg2[1] = 0;
-	/*	sclk_rate + (parity << 2)
-		+ (data_delay << 3) + (clk_delay << 4)
-		+ (pclk_smooth << 5);
-	*/
-	status |= si21_writeregs(state, TS_CTRL_REG_1, reg2, 0x02);
-	if (status != 0)
-		dprintk(" %s : TS Set Error\n", __func__);
-
-	return 0;
-
-}
-
-static int si21_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct si21xx_state *state = fe->demodulator_priv;
-	u8 regs_read[2];
-	u8 reg_read;
-	u8 i;
-	u8 lock;
-	u8 signal = si21_readreg(state, ANALOG_AGC_POWER_LEVEL_REG);
-
-	si21_readregs(state, LOCK_STATUS_REG_1, regs_read, 0x02);
-	reg_read = 0;
-
-	for (i = 0; i < 7; ++i)
-		reg_read |= ((regs_read[0] >> i) & 0x01) << (6 - i);
-
-	lock = ((reg_read & 0x7f) | (regs_read[1] & 0x80));
-
-	dprintk("%s : FE_READ_STATUS : VSTATUS: 0x%02x\n", __func__, lock);
-	*status = 0;
-
-	if (signal > 10)
-		*status |= FE_HAS_SIGNAL;
-
-	if (lock & 0x2)
-		*status |= FE_HAS_CARRIER;
-
-	if (lock & 0x20)
-		*status |= FE_HAS_VITERBI;
-
-	if (lock & 0x40)
-		*status |= FE_HAS_SYNC;
-
-	if ((lock & 0x7b) == 0x7b)
-		*status |= FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int si21_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	struct si21xx_state *state = fe->demodulator_priv;
-
-	/*status = si21_readreg(state, ANALOG_AGC_POWER_LEVEL_REG,
-						(u8*)agclevel, 0x01);*/
-
-	u16 signal = (3 * si21_readreg(state, 0x27) *
-					si21_readreg(state, 0x28));
-
-	dprintk("%s : AGCPWR: 0x%02x%02x, signal=0x%04x\n", __func__,
-		si21_readreg(state, 0x27),
-		si21_readreg(state, 0x28), (int) signal);
-
-	signal  <<= 4;
-	*strength = signal;
-
-	return 0;
-}
-
-static int si21_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct si21xx_state *state = fe->demodulator_priv;
-
-	dprintk("%s\n", __func__);
-
-	if (state->errmode != STATUS_BER)
-		return 0;
-
-	*ber = (si21_readreg(state, 0x1d) << 8) |
-				si21_readreg(state, 0x1e);
-
-	return 0;
-}
-
-static int si21_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct si21xx_state *state = fe->demodulator_priv;
-
-	s32 xsnr = 0xffff - ((si21_readreg(state, 0x24) << 8) |
-					si21_readreg(state, 0x25));
-	xsnr = 3 * (xsnr - 0xa100);
-	*snr = (xsnr > 0xffff) ? 0xffff : (xsnr < 0) ? 0 : xsnr;
-
-	dprintk("%s\n", __func__);
-
-	return 0;
-}
-
-static int si21_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	struct si21xx_state *state = fe->demodulator_priv;
-
-	dprintk("%s\n", __func__);
-
-	if (state->errmode != STATUS_UCBLOCKS)
-		*ucblocks = 0;
-	else
-		*ucblocks = (si21_readreg(state, 0x1d) << 8) |
-					si21_readreg(state, 0x1e);
-
-	return 0;
-}
-
-/*	initiates a channel acquisition sequence
-	using the specified symbol rate and code rate */
-static int si21xx_setacquire(struct dvb_frontend *fe, int symbrate,
-						fe_code_rate_t crate)
-{
-
-	struct si21xx_state *state = fe->demodulator_priv;
-	u8 coderates[] = {
-				0x0, 0x01, 0x02, 0x04, 0x00,
-				0x8, 0x10, 0x20, 0x00, 0x3f
-	};
-
-	u8 coderate_ptr;
-	int status;
-	u8 start_acq = 0x80;
-	u8 reg, regs[3];
-
-	dprintk("%s\n", __func__);
-
-	status = PASS;
-	coderate_ptr = coderates[crate];
-
-	si21xx_set_symbolrate(fe, symbrate);
-
-	/* write code rates to use in the Viterbi search */
-	status |= si21_writeregs(state,
-				VIT_SRCH_CTRL_REG_1,
-				&coderate_ptr, 0x01);
-
-	/* clear acq_start bit */
-	status |= si21_readregs(state, ACQ_CTRL_REG_2, &reg, 0x01);
-	reg &= ~start_acq;
-	status |= si21_writeregs(state, ACQ_CTRL_REG_2, &reg, 0x01);
-
-	/* use new Carrier Frequency Offset Estimator (QuickLock) */
-	regs[0] = 0xCB;
-	regs[1] = 0x40;
-	regs[2] = 0xCB;
-
-	status |= si21_writeregs(state,
-				TWO_DB_BNDWDTH_THRSHLD_REG,
-				&regs[0], 0x03);
-	reg = 0x56;
-	status |= si21_writeregs(state,
-				LSA_CTRL_REG_1, &reg, 1);
-	reg = 0x05;
-	status |= si21_writeregs(state,
-				BLIND_SCAN_CTRL_REG, &reg, 1);
-	/* start automatic acq */
-	status |= si21_writeregs(state,
-				ACQ_CTRL_REG_2, &start_acq, 0x01);
-
-	return status;
-}
-
-static int si21xx_set_frontend(struct dvb_frontend *fe)
-{
-	struct si21xx_state *state = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-
-	/* freq		Channel carrier frequency in KHz (i.e. 1550000 KHz)
-	 datarate	Channel symbol rate in Sps (i.e. 22500000 Sps)*/
-
-	/* in MHz */
-	unsigned char coarse_tune_freq;
-	int fine_tune_freq;
-	unsigned char sample_rate = 0;
-	/* boolean */
-	bool inband_interferer_ind;
-
-	/* INTERMEDIATE VALUES */
-	int icoarse_tune_freq; /* MHz */
-	int ifine_tune_freq; /* MHz */
-	unsigned int band_high;
-	unsigned int band_low;
-	unsigned int x1;
-	unsigned int x2;
-	int i;
-	bool inband_interferer_div2[ALLOWABLE_FS_COUNT];
-	bool inband_interferer_div4[ALLOWABLE_FS_COUNT];
-	int status;
-
-	/* allowable sample rates for ADC in MHz */
-	int afs[ALLOWABLE_FS_COUNT] = { 200, 192, 193, 194, 195,
-					196, 204, 205, 206, 207
-	};
-	/* in MHz */
-	int if_limit_high;
-	int if_limit_low;
-	int lnb_lo;
-	int lnb_uncertanity;
-
-	int rf_freq;
-	int data_rate;
-	unsigned char regs[4];
-
-	dprintk("%s : FE_SET_FRONTEND\n", __func__);
-
-	if (c->delivery_system != SYS_DVBS) {
-			dprintk("%s: unsupported delivery system selected (%d)\n",
-				__func__, c->delivery_system);
-			return -EOPNOTSUPP;
-	}
-
-	for (i = 0; i < ALLOWABLE_FS_COUNT; ++i)
-		inband_interferer_div2[i] = inband_interferer_div4[i] = false;
-
-	if_limit_high = -700000;
-	if_limit_low = -100000;
-	/* in MHz */
-	lnb_lo = 0;
-	lnb_uncertanity = 0;
-
-	rf_freq = 10 * c->frequency ;
-	data_rate = c->symbol_rate / 100;
-
-	status = PASS;
-
-	band_low = (rf_freq - lnb_lo) - ((lnb_uncertanity * 200)
-					+ (data_rate * 135)) / 200;
-
-	band_high = (rf_freq - lnb_lo) + ((lnb_uncertanity * 200)
-					+ (data_rate * 135)) / 200;
-
-
-	icoarse_tune_freq = 100000 *
-				(((rf_freq - lnb_lo) -
-					(if_limit_low + if_limit_high) / 2)
-								/ 100000);
-
-	ifine_tune_freq = (rf_freq - lnb_lo) - icoarse_tune_freq ;
-
-	for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) {
-		x1 = ((rf_freq - lnb_lo) / (afs[i] * 2500)) *
-					(afs[i] * 2500) + afs[i] * 2500;
-
-		x2 = ((rf_freq - lnb_lo) / (afs[i] * 2500)) *
-							(afs[i] * 2500);
-
-		if (((band_low < x1) && (x1 < band_high)) ||
-					((band_low < x2) && (x2 < band_high)))
-					inband_interferer_div4[i] = true;
-
-	}
-
-	for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) {
-		x1 = ((rf_freq - lnb_lo) / (afs[i] * 5000)) *
-					(afs[i] * 5000) + afs[i] * 5000;
-
-		x2 = ((rf_freq - lnb_lo) / (afs[i] * 5000)) *
-					(afs[i] * 5000);
-
-		if (((band_low < x1) && (x1 < band_high)) ||
-					((band_low < x2) && (x2 < band_high)))
-					inband_interferer_div2[i] = true;
-	}
-
-	inband_interferer_ind = true;
-	for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) {
-		if (inband_interferer_div2[i] || inband_interferer_div4[i]) {
-			inband_interferer_ind = false;
-			break;
-		}
-	}
-
-	if (inband_interferer_ind) {
-		for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) {
-			if (!inband_interferer_div2[i]) {
-				sample_rate = (u8) afs[i];
-				break;
-			}
-		}
-	} else {
-		for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) {
-			if ((inband_interferer_div2[i] ||
-			     !inband_interferer_div4[i])) {
-				sample_rate = (u8) afs[i];
-				break;
-			}
-		}
-
-	}
-
-	if (sample_rate > 207 || sample_rate < 192)
-		sample_rate = 200;
-
-	fine_tune_freq = ((0x4000 * (ifine_tune_freq / 10)) /
-					((sample_rate) * 1000));
-
-	coarse_tune_freq = (u8)(icoarse_tune_freq / 100000);
-
-	regs[0] = sample_rate;
-	regs[1] = coarse_tune_freq;
-	regs[2] = fine_tune_freq & 0xFF;
-	regs[3] = fine_tune_freq >> 8 & 0xFF;
-
-	status |= si21_writeregs(state, PLL_DIVISOR_REG, &regs[0], 0x04);
-
-	state->fs = sample_rate;/*ADC MHz*/
-	si21xx_setacquire(fe, c->symbol_rate, c->fec_inner);
-
-	return 0;
-}
-
-static int si21xx_sleep(struct dvb_frontend *fe)
-{
-	struct si21xx_state *state = fe->demodulator_priv;
-	u8 regdata;
-
-	dprintk("%s\n", __func__);
-
-	si21_readregs(state, SYSTEM_MODE_REG, &regdata, 0x01);
-	regdata |= 1 << 6;
-	si21_writeregs(state, SYSTEM_MODE_REG, &regdata, 0x01);
-	state->initialised = 0;
-
-	return 0;
-}
-
-static void si21xx_release(struct dvb_frontend *fe)
-{
-	struct si21xx_state *state = fe->demodulator_priv;
-
-	dprintk("%s\n", __func__);
-
-	kfree(state);
-}
-
-static struct dvb_frontend_ops si21xx_ops = {
-	.delsys = { SYS_DVBS },
-	.info = {
-		.name			= "SL SI21XX DVB-S",
-		.frequency_min		= 950000,
-		.frequency_max		= 2150000,
-		.frequency_stepsize	= 125,	 /* kHz for QPSK frontends */
-		.frequency_tolerance	= 0,
-		.symbol_rate_min	= 1000000,
-		.symbol_rate_max	= 45000000,
-		.symbol_rate_tolerance	= 500,	/* ppm */
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-		FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
-		FE_CAN_QPSK |
-		FE_CAN_FEC_AUTO
-	},
-
-	.release = si21xx_release,
-	.init = si21xx_init,
-	.sleep = si21xx_sleep,
-	.write = si21_write,
-	.read_status = si21_read_status,
-	.read_ber = si21_read_ber,
-	.read_signal_strength = si21_read_signal_strength,
-	.read_snr = si21_read_snr,
-	.read_ucblocks = si21_read_ucblocks,
-	.diseqc_send_master_cmd = si21xx_send_diseqc_msg,
-	.diseqc_send_burst = si21xx_send_diseqc_burst,
-	.set_tone = si21xx_set_tone,
-	.set_voltage = si21xx_set_voltage,
-
-	.set_frontend = si21xx_set_frontend,
-};
-
-struct dvb_frontend *si21xx_attach(const struct si21xx_config *config,
-						struct i2c_adapter *i2c)
-{
-	struct si21xx_state *state = NULL;
-	int id;
-
-	dprintk("%s\n", __func__);
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct si21xx_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->initialised = 0;
-	state->errmode = STATUS_BER;
-
-	/* check if the demod is there */
-	id = si21_readreg(state, SYSTEM_MODE_REG);
-	si21_writereg(state, SYSTEM_MODE_REG, id | 0x40); /* standby off */
-	msleep(200);
-	id = si21_readreg(state, 0x00);
-
-	/* register 0x00 contains:
-		0x34 for SI2107
-		0x24 for SI2108
-		0x14 for SI2109
-		0x04 for SI2110
-	*/
-	if (id != 0x04 && id != 0x14)
-		goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &si21xx_ops,
-					sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(si21xx_attach);
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("SL SI21XX DVB Demodulator driver");
-MODULE_AUTHOR("Igor M. Liplianin");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/si21xx.h b/drivers/media/dvb/frontends/si21xx.h
deleted file mode 100644
index 141b5b8..0000000
--- a/drivers/media/dvb/frontends/si21xx.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef SI21XX_H
-#define SI21XX_H
-
-#include <linux/dvb/frontend.h>
-#include "dvb_frontend.h"
-
-struct si21xx_config {
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* minimum delay before retuning */
-	int min_delay_ms;
-};
-
-#if defined(CONFIG_DVB_SI21XX) || \
-		(defined(CONFIG_DVB_SI21XX_MODULE) && defined(MODULE))
-extern struct dvb_frontend *si21xx_attach(const struct si21xx_config *config,
-						struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *si21xx_attach(
-		const struct si21xx_config *config, struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-static inline int si21xx_writeregister(struct dvb_frontend *fe, u8 reg, u8 val)
-{
-	int r = 0;
-	u8 buf[] = {reg, val};
-	if (fe->ops.write)
-		r = fe->ops.write(fe, buf, 2);
-	return r;
-}
-
-#endif
diff --git a/drivers/media/dvb/frontends/sp8870.c b/drivers/media/dvb/frontends/sp8870.c
deleted file mode 100644
index e37274c..0000000
--- a/drivers/media/dvb/frontends/sp8870.c
+++ /dev/null
@@ -1,620 +0,0 @@
-/*
-    Driver for Spase SP8870 demodulator
-
-    Copyright (C) 1999 Juergen Peitz
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-/*
- * This driver needs external firmware. Please use the command
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware alps_tdlb7" to
- * download/extract it, and then copy it to /usr/lib/hotplug/firmware
- * or /lib/firmware (depending on configuration of firmware hotplug).
- */
-#define SP8870_DEFAULT_FIRMWARE "dvb-fe-sp8870.fw"
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "sp8870.h"
-
-
-struct sp8870_state {
-
-	struct i2c_adapter* i2c;
-
-	const struct sp8870_config* config;
-
-	struct dvb_frontend frontend;
-
-	/* demodulator private data */
-	u8 initialised:1;
-};
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "sp8870: " args); \
-	} while (0)
-
-/* firmware size for sp8870 */
-#define SP8870_FIRMWARE_SIZE 16382
-
-/* starting point for firmware in file 'Sc_main.mc' */
-#define SP8870_FIRMWARE_OFFSET 0x0A
-
-static int sp8870_writereg (struct sp8870_state* state, u16 reg, u16 data)
-{
-	u8 buf [] = { reg >> 8, reg & 0xff, data >> 8, data & 0xff };
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 4 };
-	int err;
-
-	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-		dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int sp8870_readreg (struct sp8870_state* state, u16 reg)
-{
-	int ret;
-	u8 b0 [] = { reg >> 8 , reg & 0xff };
-	u8 b1 [] = { 0, 0 };
-	struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },
-			   { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 } };
-
-	ret = i2c_transfer (state->i2c, msg, 2);
-
-	if (ret != 2) {
-		dprintk("%s: readreg error (ret == %i)\n", __func__, ret);
-		return -1;
-	}
-
-	return (b1[0] << 8 | b1[1]);
-}
-
-static int sp8870_firmware_upload (struct sp8870_state* state, const struct firmware *fw)
-{
-	struct i2c_msg msg;
-	const char *fw_buf = fw->data;
-	int fw_pos;
-	u8 tx_buf[255];
-	int tx_len;
-	int err = 0;
-
-	dprintk ("%s: ...\n", __func__);
-
-	if (fw->size < SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET)
-		return -EINVAL;
-
-	// system controller stop
-	sp8870_writereg(state, 0x0F00, 0x0000);
-
-	// instruction RAM register hiword
-	sp8870_writereg(state, 0x8F08, ((SP8870_FIRMWARE_SIZE / 2) & 0xFFFF));
-
-	// instruction RAM MWR
-	sp8870_writereg(state, 0x8F0A, ((SP8870_FIRMWARE_SIZE / 2) >> 16));
-
-	// do firmware upload
-	fw_pos = SP8870_FIRMWARE_OFFSET;
-	while (fw_pos < SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET){
-		tx_len = (fw_pos <= SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET - 252) ? 252 : SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET - fw_pos;
-		// write register 0xCF0A
-		tx_buf[0] = 0xCF;
-		tx_buf[1] = 0x0A;
-		memcpy(&tx_buf[2], fw_buf + fw_pos, tx_len);
-		msg.addr = state->config->demod_address;
-		msg.flags = 0;
-		msg.buf = tx_buf;
-		msg.len = tx_len + 2;
-		if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-			printk("%s: firmware upload failed!\n", __func__);
-			printk ("%s: i2c error (err == %i)\n", __func__, err);
-			return err;
-		}
-		fw_pos += tx_len;
-	}
-
-	dprintk ("%s: done!\n", __func__);
-	return 0;
-};
-
-static void sp8870_microcontroller_stop (struct sp8870_state* state)
-{
-	sp8870_writereg(state, 0x0F08, 0x000);
-	sp8870_writereg(state, 0x0F09, 0x000);
-
-	// microcontroller STOP
-	sp8870_writereg(state, 0x0F00, 0x000);
-}
-
-static void sp8870_microcontroller_start (struct sp8870_state* state)
-{
-	sp8870_writereg(state, 0x0F08, 0x000);
-	sp8870_writereg(state, 0x0F09, 0x000);
-
-	// microcontroller START
-	sp8870_writereg(state, 0x0F00, 0x001);
-	// not documented but if we don't read 0x0D01 out here
-	// we don't get a correct data valid signal
-	sp8870_readreg(state, 0x0D01);
-}
-
-static int sp8870_read_data_valid_signal(struct sp8870_state* state)
-{
-	return (sp8870_readreg(state, 0x0D02) > 0);
-}
-
-static int configure_reg0xc05 (struct dtv_frontend_properties *p, u16 *reg0xc05)
-{
-	int known_parameters = 1;
-
-	*reg0xc05 = 0x000;
-
-	switch (p->modulation) {
-	case QPSK:
-		break;
-	case QAM_16:
-		*reg0xc05 |= (1 << 10);
-		break;
-	case QAM_64:
-		*reg0xc05 |= (2 << 10);
-		break;
-	case QAM_AUTO:
-		known_parameters = 0;
-		break;
-	default:
-		return -EINVAL;
-	};
-
-	switch (p->hierarchy) {
-	case HIERARCHY_NONE:
-		break;
-	case HIERARCHY_1:
-		*reg0xc05 |= (1 << 7);
-		break;
-	case HIERARCHY_2:
-		*reg0xc05 |= (2 << 7);
-		break;
-	case HIERARCHY_4:
-		*reg0xc05 |= (3 << 7);
-		break;
-	case HIERARCHY_AUTO:
-		known_parameters = 0;
-		break;
-	default:
-		return -EINVAL;
-	};
-
-	switch (p->code_rate_HP) {
-	case FEC_1_2:
-		break;
-	case FEC_2_3:
-		*reg0xc05 |= (1 << 3);
-		break;
-	case FEC_3_4:
-		*reg0xc05 |= (2 << 3);
-		break;
-	case FEC_5_6:
-		*reg0xc05 |= (3 << 3);
-		break;
-	case FEC_7_8:
-		*reg0xc05 |= (4 << 3);
-		break;
-	case FEC_AUTO:
-		known_parameters = 0;
-		break;
-	default:
-		return -EINVAL;
-	};
-
-	if (known_parameters)
-		*reg0xc05 |= (2 << 1);	/* use specified parameters */
-	else
-		*reg0xc05 |= (1 << 1);	/* enable autoprobing */
-
-	return 0;
-}
-
-static int sp8870_wake_up(struct sp8870_state* state)
-{
-	// enable TS output and interface pins
-	return sp8870_writereg(state, 0xC18, 0x00D);
-}
-
-static int sp8870_set_frontend_parameters(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct sp8870_state* state = fe->demodulator_priv;
-	int  err;
-	u16 reg0xc05;
-
-	if ((err = configure_reg0xc05(p, &reg0xc05)))
-		return err;
-
-	// system controller stop
-	sp8870_microcontroller_stop(state);
-
-	// set tuner parameters
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	// sample rate correction bit [23..17]
-	sp8870_writereg(state, 0x0319, 0x000A);
-
-	// sample rate correction bit [16..0]
-	sp8870_writereg(state, 0x031A, 0x0AAB);
-
-	// integer carrier offset
-	sp8870_writereg(state, 0x0309, 0x0400);
-
-	// fractional carrier offset
-	sp8870_writereg(state, 0x030A, 0x0000);
-
-	// filter for 6/7/8 Mhz channel
-	if (p->bandwidth_hz == 6000000)
-		sp8870_writereg(state, 0x0311, 0x0002);
-	else if (p->bandwidth_hz == 7000000)
-		sp8870_writereg(state, 0x0311, 0x0001);
-	else
-		sp8870_writereg(state, 0x0311, 0x0000);
-
-	// scan order: 2k first = 0x0000, 8k first = 0x0001
-	if (p->transmission_mode == TRANSMISSION_MODE_2K)
-		sp8870_writereg(state, 0x0338, 0x0000);
-	else
-		sp8870_writereg(state, 0x0338, 0x0001);
-
-	sp8870_writereg(state, 0xc05, reg0xc05);
-
-	// read status reg in order to clear pending irqs
-	sp8870_readreg(state, 0x200);
-
-	// system controller start
-	sp8870_microcontroller_start(state);
-
-	return 0;
-}
-
-static int sp8870_init (struct dvb_frontend* fe)
-{
-	struct sp8870_state* state = fe->demodulator_priv;
-	const struct firmware *fw = NULL;
-
-	sp8870_wake_up(state);
-	if (state->initialised) return 0;
-	state->initialised = 1;
-
-	dprintk ("%s\n", __func__);
-
-
-	/* request the firmware, this will block until someone uploads it */
-	printk("sp8870: waiting for firmware upload (%s)...\n", SP8870_DEFAULT_FIRMWARE);
-	if (state->config->request_firmware(fe, &fw, SP8870_DEFAULT_FIRMWARE)) {
-		printk("sp8870: no firmware upload (timeout or file not found?)\n");
-		return -EIO;
-	}
-
-	if (sp8870_firmware_upload(state, fw)) {
-		printk("sp8870: writing firmware to device failed\n");
-		release_firmware(fw);
-		return -EIO;
-	}
-	release_firmware(fw);
-	printk("sp8870: firmware upload complete\n");
-
-	/* enable TS output and interface pins */
-	sp8870_writereg(state, 0xc18, 0x00d);
-
-	// system controller stop
-	sp8870_microcontroller_stop(state);
-
-	// ADC mode
-	sp8870_writereg(state, 0x0301, 0x0003);
-
-	// Reed Solomon parity bytes passed to output
-	sp8870_writereg(state, 0x0C13, 0x0001);
-
-	// MPEG clock is suppressed if no valid data
-	sp8870_writereg(state, 0x0C14, 0x0001);
-
-	/* bit 0x010: enable data valid signal */
-	sp8870_writereg(state, 0x0D00, 0x010);
-	sp8870_writereg(state, 0x0D01, 0x000);
-
-	return 0;
-}
-
-static int sp8870_read_status (struct dvb_frontend* fe, fe_status_t * fe_status)
-{
-	struct sp8870_state* state = fe->demodulator_priv;
-	int status;
-	int signal;
-
-	*fe_status = 0;
-
-	status = sp8870_readreg (state, 0x0200);
-	if (status < 0)
-		return -EIO;
-
-	signal = sp8870_readreg (state, 0x0303);
-	if (signal < 0)
-		return -EIO;
-
-	if (signal > 0x0F)
-		*fe_status |= FE_HAS_SIGNAL;
-	if (status & 0x08)
-		*fe_status |= FE_HAS_SYNC;
-	if (status & 0x04)
-		*fe_status |= FE_HAS_LOCK | FE_HAS_CARRIER | FE_HAS_VITERBI;
-
-	return 0;
-}
-
-static int sp8870_read_ber (struct dvb_frontend* fe, u32 * ber)
-{
-	struct sp8870_state* state = fe->demodulator_priv;
-	int ret;
-	u32 tmp;
-
-	*ber = 0;
-
-	ret = sp8870_readreg(state, 0xC08);
-	if (ret < 0)
-		return -EIO;
-
-	tmp = ret & 0x3F;
-
-	ret = sp8870_readreg(state, 0xC07);
-	if (ret < 0)
-		return -EIO;
-
-	 tmp = ret << 6;
-
-	if (tmp >= 0x3FFF0)
-		tmp = ~0;
-
-	*ber = tmp;
-
-	return 0;
-}
-
-static int sp8870_read_signal_strength(struct dvb_frontend* fe,  u16 * signal)
-{
-	struct sp8870_state* state = fe->demodulator_priv;
-	int ret;
-	u16 tmp;
-
-	*signal = 0;
-
-	ret = sp8870_readreg (state, 0x306);
-	if (ret < 0)
-		return -EIO;
-
-	tmp = ret << 8;
-
-	ret = sp8870_readreg (state, 0x303);
-	if (ret < 0)
-		return -EIO;
-
-	tmp |= ret;
-
-	if (tmp)
-		*signal = 0xFFFF - tmp;
-
-	return 0;
-}
-
-static int sp8870_read_uncorrected_blocks (struct dvb_frontend* fe, u32* ublocks)
-{
-	struct sp8870_state* state = fe->demodulator_priv;
-	int ret;
-
-	*ublocks = 0;
-
-	ret = sp8870_readreg(state, 0xC0C);
-	if (ret < 0)
-		return -EIO;
-
-	if (ret == 0xFFFF)
-		ret = ~0;
-
-	*ublocks = ret;
-
-	return 0;
-}
-
-/* number of trials to recover from lockup */
-#define MAXTRIALS 5
-/* maximum checks for data valid signal */
-#define MAXCHECKS 100
-
-/* only for debugging: counter for detected lockups */
-static int lockups;
-/* only for debugging: counter for channel switches */
-static int switches;
-
-static int sp8870_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct sp8870_state* state = fe->demodulator_priv;
-
-	/*
-	    The firmware of the sp8870 sometimes locks up after setting frontend parameters.
-	    We try to detect this by checking the data valid signal.
-	    If it is not set after MAXCHECKS we try to recover the lockup by setting
-	    the frontend parameters again.
-	*/
-
-	int err = 0;
-	int valid = 0;
-	int trials = 0;
-	int check_count = 0;
-
-	dprintk("%s: frequency = %i\n", __func__, p->frequency);
-
-	for (trials = 1; trials <= MAXTRIALS; trials++) {
-
-		err = sp8870_set_frontend_parameters(fe);
-		if (err)
-			return err;
-
-		for (check_count = 0; check_count < MAXCHECKS; check_count++) {
-//			valid = ((sp8870_readreg(i2c, 0x0200) & 4) == 0);
-			valid = sp8870_read_data_valid_signal(state);
-			if (valid) {
-				dprintk("%s: delay = %i usec\n",
-					__func__, check_count * 10);
-				break;
-			}
-			udelay(10);
-		}
-		if (valid)
-			break;
-	}
-
-	if (!valid) {
-		printk("%s: firmware crash!!!!!!\n", __func__);
-		return -EIO;
-	}
-
-	if (debug) {
-		if (valid) {
-			if (trials > 1) {
-				printk("%s: firmware lockup!!!\n", __func__);
-				printk("%s: recovered after %i trial(s))\n",  __func__, trials - 1);
-				lockups++;
-			}
-		}
-		switches++;
-		printk("%s: switches = %i lockups = %i\n", __func__, switches, lockups);
-	}
-
-	return 0;
-}
-
-static int sp8870_sleep(struct dvb_frontend* fe)
-{
-	struct sp8870_state* state = fe->demodulator_priv;
-
-	// tristate TS output and disable interface pins
-	return sp8870_writereg(state, 0xC18, 0x000);
-}
-
-static int sp8870_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
-{
-	fesettings->min_delay_ms = 350;
-	fesettings->step_size = 0;
-	fesettings->max_drift = 0;
-	return 0;
-}
-
-static int sp8870_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
-{
-	struct sp8870_state* state = fe->demodulator_priv;
-
-	if (enable) {
-		return sp8870_writereg(state, 0x206, 0x001);
-	} else {
-		return sp8870_writereg(state, 0x206, 0x000);
-	}
-}
-
-static void sp8870_release(struct dvb_frontend* fe)
-{
-	struct sp8870_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops sp8870_ops;
-
-struct dvb_frontend* sp8870_attach(const struct sp8870_config* config,
-				   struct i2c_adapter* i2c)
-{
-	struct sp8870_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct sp8870_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->initialised = 0;
-
-	/* check if the demod is there */
-	if (sp8870_readreg(state, 0x0200) < 0) goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &sp8870_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops sp8870_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name			= "Spase SP8870 DVB-T",
-		.frequency_min		= 470000000,
-		.frequency_max		= 860000000,
-		.frequency_stepsize	= 166666,
-		.caps			= FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
-					  FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 |
-					  FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-					  FE_CAN_QPSK | FE_CAN_QAM_16 |
-					  FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-					  FE_CAN_HIERARCHY_AUTO |  FE_CAN_RECOVER
-	},
-
-	.release = sp8870_release,
-
-	.init = sp8870_init,
-	.sleep = sp8870_sleep,
-	.i2c_gate_ctrl = sp8870_i2c_gate_ctrl,
-
-	.set_frontend = sp8870_set_frontend,
-	.get_tune_settings = sp8870_get_tune_settings,
-
-	.read_status = sp8870_read_status,
-	.read_ber = sp8870_read_ber,
-	.read_signal_strength = sp8870_read_signal_strength,
-	.read_ucblocks = sp8870_read_uncorrected_blocks,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("Spase SP8870 DVB-T Demodulator driver");
-MODULE_AUTHOR("Juergen Peitz");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(sp8870_attach);
diff --git a/drivers/media/dvb/frontends/sp8870.h b/drivers/media/dvb/frontends/sp8870.h
deleted file mode 100644
index a764a79..0000000
--- a/drivers/media/dvb/frontends/sp8870.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
-    Driver for Spase SP8870 demodulator
-
-    Copyright (C) 1999 Juergen Peitz
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef SP8870_H
-#define SP8870_H
-
-#include <linux/dvb/frontend.h>
-#include <linux/firmware.h>
-
-struct sp8870_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* request firmware for device */
-	int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
-};
-
-#if defined(CONFIG_DVB_SP8870) || (defined(CONFIG_DVB_SP8870_MODULE) && defined(MODULE))
-extern struct dvb_frontend* sp8870_attach(const struct sp8870_config* config,
-					  struct i2c_adapter* i2c);
-#else
-static inline struct dvb_frontend* sp8870_attach(const struct sp8870_config* config,
-					  struct i2c_adapter* i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_SP8870
-
-#endif // SP8870_H
diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb/frontends/sp887x.c
deleted file mode 100644
index f4096cc..0000000
--- a/drivers/media/dvb/frontends/sp887x.c
+++ /dev/null
@@ -1,629 +0,0 @@
-/*
-   Driver for the Spase sp887x demodulator
-*/
-
-/*
- * This driver needs external firmware. Please use the command
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware sp887x" to
- * download/extract it, and then copy it to /usr/lib/hotplug/firmware
- * or /lib/firmware (depending on configuration of firmware hotplug).
- */
-#define SP887X_DEFAULT_FIRMWARE "dvb-fe-sp887x.fw"
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "sp887x.h"
-
-
-struct sp887x_state {
-	struct i2c_adapter* i2c;
-	const struct sp887x_config* config;
-	struct dvb_frontend frontend;
-
-	/* demodulator private data */
-	u8 initialised:1;
-};
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "sp887x: " args); \
-	} while (0)
-
-static int i2c_writebytes (struct sp887x_state* state, u8 *buf, u8 len)
-{
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = len };
-	int err;
-
-	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-		printk ("%s: i2c write error (addr %02x, err == %i)\n",
-			__func__, state->config->demod_address, err);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int sp887x_writereg (struct sp887x_state* state, u16 reg, u16 data)
-{
-	u8 b0 [] = { reg >> 8 , reg & 0xff, data >> 8, data & 0xff };
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 4 };
-	int ret;
-
-	if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) {
-		/**
-		 *  in case of soft reset we ignore ACK errors...
-		 */
-		if (!(reg == 0xf1a && data == 0x000 &&
-			(ret == -EREMOTEIO || ret == -EFAULT)))
-		{
-			printk("%s: writereg error "
-			       "(reg %03x, data %03x, ret == %i)\n",
-			       __func__, reg & 0xffff, data & 0xffff, ret);
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
-static int sp887x_readreg (struct sp887x_state* state, u16 reg)
-{
-	u8 b0 [] = { reg >> 8 , reg & 0xff };
-	u8 b1 [2];
-	int ret;
-	struct i2c_msg msg[] = {{ .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },
-			 { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 }};
-
-	if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) {
-		printk("%s: readreg error (ret == %i)\n", __func__, ret);
-		return -1;
-	}
-
-	return (((b1[0] << 8) | b1[1]) & 0xfff);
-}
-
-static void sp887x_microcontroller_stop (struct sp887x_state* state)
-{
-	dprintk("%s\n", __func__);
-	sp887x_writereg(state, 0xf08, 0x000);
-	sp887x_writereg(state, 0xf09, 0x000);
-
-	/* microcontroller STOP */
-	sp887x_writereg(state, 0xf00, 0x000);
-}
-
-static void sp887x_microcontroller_start (struct sp887x_state* state)
-{
-	dprintk("%s\n", __func__);
-	sp887x_writereg(state, 0xf08, 0x000);
-	sp887x_writereg(state, 0xf09, 0x000);
-
-	/* microcontroller START */
-	sp887x_writereg(state, 0xf00, 0x001);
-}
-
-static void sp887x_setup_agc (struct sp887x_state* state)
-{
-	/* setup AGC parameters */
-	dprintk("%s\n", __func__);
-	sp887x_writereg(state, 0x33c, 0x054);
-	sp887x_writereg(state, 0x33b, 0x04c);
-	sp887x_writereg(state, 0x328, 0x000);
-	sp887x_writereg(state, 0x327, 0x005);
-	sp887x_writereg(state, 0x326, 0x001);
-	sp887x_writereg(state, 0x325, 0x001);
-	sp887x_writereg(state, 0x324, 0x001);
-	sp887x_writereg(state, 0x318, 0x050);
-	sp887x_writereg(state, 0x317, 0x3fe);
-	sp887x_writereg(state, 0x316, 0x001);
-	sp887x_writereg(state, 0x313, 0x005);
-	sp887x_writereg(state, 0x312, 0x002);
-	sp887x_writereg(state, 0x306, 0x000);
-	sp887x_writereg(state, 0x303, 0x000);
-}
-
-#define BLOCKSIZE 30
-#define FW_SIZE 0x4000
-/**
- *  load firmware and setup MPEG interface...
- */
-static int sp887x_initial_setup (struct dvb_frontend* fe, const struct firmware *fw)
-{
-	struct sp887x_state* state = fe->demodulator_priv;
-	u8 buf [BLOCKSIZE+2];
-	int i;
-	int fw_size = fw->size;
-	const unsigned char *mem = fw->data;
-
-	dprintk("%s\n", __func__);
-
-	/* ignore the first 10 bytes, then we expect 0x4000 bytes of firmware */
-	if (fw_size < FW_SIZE+10)
-		return -ENODEV;
-
-	mem = fw->data + 10;
-
-	/* soft reset */
-	sp887x_writereg(state, 0xf1a, 0x000);
-
-	sp887x_microcontroller_stop (state);
-
-	printk ("%s: firmware upload... ", __func__);
-
-	/* setup write pointer to -1 (end of memory) */
-	/* bit 0x8000 in address is set to enable 13bit mode */
-	sp887x_writereg(state, 0x8f08, 0x1fff);
-
-	/* dummy write (wrap around to start of memory) */
-	sp887x_writereg(state, 0x8f0a, 0x0000);
-
-	for (i = 0; i < FW_SIZE; i += BLOCKSIZE) {
-		int c = BLOCKSIZE;
-		int err;
-
-		if (i+c > FW_SIZE)
-			c = FW_SIZE - i;
-
-		/* bit 0x8000 in address is set to enable 13bit mode */
-		/* bit 0x4000 enables multibyte read/write transfers */
-		/* write register is 0xf0a */
-		buf[0] = 0xcf;
-		buf[1] = 0x0a;
-
-		memcpy(&buf[2], mem + i, c);
-
-		if ((err = i2c_writebytes (state, buf, c+2)) < 0) {
-			printk ("failed.\n");
-			printk ("%s: i2c error (err == %i)\n", __func__, err);
-			return err;
-		}
-	}
-
-	/* don't write RS bytes between packets */
-	sp887x_writereg(state, 0xc13, 0x001);
-
-	/* suppress clock if (!data_valid) */
-	sp887x_writereg(state, 0xc14, 0x000);
-
-	/* setup MPEG interface... */
-	sp887x_writereg(state, 0xc1a, 0x872);
-	sp887x_writereg(state, 0xc1b, 0x001);
-	sp887x_writereg(state, 0xc1c, 0x000); /* parallel mode (serial mode == 1) */
-	sp887x_writereg(state, 0xc1a, 0x871);
-
-	/* ADC mode, 2 for MT8872, 3 for SP8870/SP8871 */
-	sp887x_writereg(state, 0x301, 0x002);
-
-	sp887x_setup_agc(state);
-
-	/* bit 0x010: enable data valid signal */
-	sp887x_writereg(state, 0xd00, 0x010);
-	sp887x_writereg(state, 0x0d1, 0x000);
-	return 0;
-};
-
-static int configure_reg0xc05(struct dtv_frontend_properties *p, u16 *reg0xc05)
-{
-	int known_parameters = 1;
-
-	*reg0xc05 = 0x000;
-
-	switch (p->modulation) {
-	case QPSK:
-		break;
-	case QAM_16:
-		*reg0xc05 |= (1 << 10);
-		break;
-	case QAM_64:
-		*reg0xc05 |= (2 << 10);
-		break;
-	case QAM_AUTO:
-		known_parameters = 0;
-		break;
-	default:
-		return -EINVAL;
-	};
-
-	switch (p->hierarchy) {
-	case HIERARCHY_NONE:
-		break;
-	case HIERARCHY_1:
-		*reg0xc05 |= (1 << 7);
-		break;
-	case HIERARCHY_2:
-		*reg0xc05 |= (2 << 7);
-		break;
-	case HIERARCHY_4:
-		*reg0xc05 |= (3 << 7);
-		break;
-	case HIERARCHY_AUTO:
-		known_parameters = 0;
-		break;
-	default:
-		return -EINVAL;
-	};
-
-	switch (p->code_rate_HP) {
-	case FEC_1_2:
-		break;
-	case FEC_2_3:
-		*reg0xc05 |= (1 << 3);
-		break;
-	case FEC_3_4:
-		*reg0xc05 |= (2 << 3);
-		break;
-	case FEC_5_6:
-		*reg0xc05 |= (3 << 3);
-		break;
-	case FEC_7_8:
-		*reg0xc05 |= (4 << 3);
-		break;
-	case FEC_AUTO:
-		known_parameters = 0;
-		break;
-	default:
-		return -EINVAL;
-	};
-
-	if (known_parameters)
-		*reg0xc05 |= (2 << 1);	/* use specified parameters */
-	else
-		*reg0xc05 |= (1 << 1);	/* enable autoprobing */
-
-	return 0;
-}
-
-/**
- *  estimates division of two 24bit numbers,
- *  derived from the ves1820/stv0299 driver code
- */
-static void divide (int n, int d, int *quotient_i, int *quotient_f)
-{
-	unsigned int q, r;
-
-	r = (n % d) << 8;
-	q = (r / d);
-
-	if (quotient_i)
-		*quotient_i = q;
-
-	if (quotient_f) {
-		r = (r % d) << 8;
-		q = (q << 8) | (r / d);
-		r = (r % d) << 8;
-		*quotient_f = (q << 8) | (r / d);
-	}
-}
-
-static void sp887x_correct_offsets (struct sp887x_state* state,
-				    struct dtv_frontend_properties *p,
-				    int actual_freq)
-{
-	static const u32 srate_correction [] = { 1879617, 4544878, 8098561 };
-	int bw_index;
-	int freq_offset = actual_freq - p->frequency;
-	int sysclock = 61003; //[kHz]
-	int ifreq = 36000000;
-	int freq;
-	int frequency_shift;
-
-	switch (p->bandwidth_hz) {
-	default:
-	case 8000000:
-		bw_index = 0;
-		break;
-	case 7000000:
-		bw_index = 1;
-		break;
-	case 6000000:
-		bw_index = 2;
-		break;
-	}
-
-	if (p->inversion == INVERSION_ON)
-		freq = ifreq - freq_offset;
-	else
-		freq = ifreq + freq_offset;
-
-	divide(freq / 333, sysclock, NULL, &frequency_shift);
-
-	if (p->inversion == INVERSION_ON)
-		frequency_shift = -frequency_shift;
-
-	/* sample rate correction */
-	sp887x_writereg(state, 0x319, srate_correction[bw_index] >> 12);
-	sp887x_writereg(state, 0x31a, srate_correction[bw_index] & 0xfff);
-
-	/* carrier offset correction */
-	sp887x_writereg(state, 0x309, frequency_shift >> 12);
-	sp887x_writereg(state, 0x30a, frequency_shift & 0xfff);
-}
-
-static int sp887x_setup_frontend_parameters(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct sp887x_state* state = fe->demodulator_priv;
-	unsigned actual_freq;
-	int err;
-	u16 val, reg0xc05;
-
-	if (p->bandwidth_hz != 8000000 &&
-	    p->bandwidth_hz != 7000000 &&
-	    p->bandwidth_hz != 6000000)
-		return -EINVAL;
-
-	if ((err = configure_reg0xc05(p, &reg0xc05)))
-		return err;
-
-	sp887x_microcontroller_stop(state);
-
-	/* setup the PLL */
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-	if (fe->ops.tuner_ops.get_frequency) {
-		fe->ops.tuner_ops.get_frequency(fe, &actual_freq);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-	} else {
-		actual_freq = p->frequency;
-	}
-
-	/* read status reg in order to clear <pending irqs */
-	sp887x_readreg(state, 0x200);
-
-	sp887x_correct_offsets(state, p, actual_freq);
-
-	/* filter for 6/7/8 Mhz channel */
-	if (p->bandwidth_hz == 6000000)
-		val = 2;
-	else if (p->bandwidth_hz == 7000000)
-		val = 1;
-	else
-		val = 0;
-
-	sp887x_writereg(state, 0x311, val);
-
-	/* scan order: 2k first = 0, 8k first = 1 */
-	if (p->transmission_mode == TRANSMISSION_MODE_2K)
-		sp887x_writereg(state, 0x338, 0x000);
-	else
-		sp887x_writereg(state, 0x338, 0x001);
-
-	sp887x_writereg(state, 0xc05, reg0xc05);
-
-	if (p->bandwidth_hz == 6000000)
-		val = 2 << 3;
-	else if (p->bandwidth_hz == 7000000)
-		val = 3 << 3;
-	else
-		val = 0 << 3;
-
-	/* enable OFDM and SAW bits as lock indicators in sync register 0xf17,
-	 * optimize algorithm for given bandwidth...
-	 */
-	sp887x_writereg(state, 0xf14, 0x160 | val);
-	sp887x_writereg(state, 0xf15, 0x000);
-
-	sp887x_microcontroller_start(state);
-	return 0;
-}
-
-static int sp887x_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct sp887x_state* state = fe->demodulator_priv;
-	u16 snr12 = sp887x_readreg(state, 0xf16);
-	u16 sync0x200 = sp887x_readreg(state, 0x200);
-	u16 sync0xf17 = sp887x_readreg(state, 0xf17);
-
-	*status = 0;
-
-	if (snr12 > 0x00f)
-		*status |= FE_HAS_SIGNAL;
-
-	//if (sync0x200 & 0x004)
-	//	*status |= FE_HAS_SYNC | FE_HAS_CARRIER;
-
-	//if (sync0x200 & 0x008)
-	//	*status |= FE_HAS_VITERBI;
-
-	if ((sync0xf17 & 0x00f) == 0x002) {
-		*status |= FE_HAS_LOCK;
-		*status |= FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_CARRIER;
-	}
-
-	if (sync0x200 & 0x001) {	/* tuner adjustment requested...*/
-		int steps = (sync0x200 >> 4) & 0x00f;
-		if (steps & 0x008)
-			steps = -steps;
-		dprintk("sp887x: implement tuner adjustment (%+i steps)!!\n",
-		       steps);
-	}
-
-	return 0;
-}
-
-static int sp887x_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct sp887x_state* state = fe->demodulator_priv;
-
-	*ber = (sp887x_readreg(state, 0xc08) & 0x3f) |
-	       (sp887x_readreg(state, 0xc07) << 6);
-	sp887x_writereg(state, 0xc08, 0x000);
-	sp887x_writereg(state, 0xc07, 0x000);
-	if (*ber >= 0x3fff0)
-		*ber = ~0;
-
-	return 0;
-}
-
-static int sp887x_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	struct sp887x_state* state = fe->demodulator_priv;
-
-	u16 snr12 = sp887x_readreg(state, 0xf16);
-	u32 signal = 3 * (snr12 << 4);
-	*strength = (signal < 0xffff) ? signal : 0xffff;
-
-	return 0;
-}
-
-static int sp887x_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct sp887x_state* state = fe->demodulator_priv;
-
-	u16 snr12 = sp887x_readreg(state, 0xf16);
-	*snr = (snr12 << 4) | (snr12 >> 8);
-
-	return 0;
-}
-
-static int sp887x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct sp887x_state* state = fe->demodulator_priv;
-
-	*ucblocks = sp887x_readreg(state, 0xc0c);
-	if (*ucblocks == 0xfff)
-		*ucblocks = ~0;
-
-	return 0;
-}
-
-static int sp887x_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
-{
-	struct sp887x_state* state = fe->demodulator_priv;
-
-	if (enable) {
-		return sp887x_writereg(state, 0x206, 0x001);
-	} else {
-		return sp887x_writereg(state, 0x206, 0x000);
-	}
-}
-
-static int sp887x_sleep(struct dvb_frontend* fe)
-{
-	struct sp887x_state* state = fe->demodulator_priv;
-
-	/* tristate TS output and disable interface pins */
-	sp887x_writereg(state, 0xc18, 0x000);
-
-	return 0;
-}
-
-static int sp887x_init(struct dvb_frontend* fe)
-{
-	struct sp887x_state* state = fe->demodulator_priv;
-	const struct firmware *fw = NULL;
-	int ret;
-
-	if (!state->initialised) {
-		/* request the firmware, this will block until someone uploads it */
-		printk("sp887x: waiting for firmware upload (%s)...\n", SP887X_DEFAULT_FIRMWARE);
-		ret = state->config->request_firmware(fe, &fw, SP887X_DEFAULT_FIRMWARE);
-		if (ret) {
-			printk("sp887x: no firmware upload (timeout or file not found?)\n");
-			return ret;
-		}
-
-		ret = sp887x_initial_setup(fe, fw);
-		release_firmware(fw);
-		if (ret) {
-			printk("sp887x: writing firmware to device failed\n");
-			return ret;
-		}
-		printk("sp887x: firmware upload complete\n");
-		state->initialised = 1;
-	}
-
-	/* enable TS output and interface pins */
-	sp887x_writereg(state, 0xc18, 0x00d);
-
-	return 0;
-}
-
-static int sp887x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
-{
-	fesettings->min_delay_ms = 350;
-	fesettings->step_size = 166666*2;
-	fesettings->max_drift = (166666*2)+1;
-	return 0;
-}
-
-static void sp887x_release(struct dvb_frontend* fe)
-{
-	struct sp887x_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops sp887x_ops;
-
-struct dvb_frontend* sp887x_attach(const struct sp887x_config* config,
-				   struct i2c_adapter* i2c)
-{
-	struct sp887x_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct sp887x_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->initialised = 0;
-
-	/* check if the demod is there */
-	if (sp887x_readreg(state, 0x0200) < 0) goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &sp887x_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops sp887x_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name = "Spase SP887x DVB-T",
-		.frequency_min =  50500000,
-		.frequency_max = 858000000,
-		.frequency_stepsize = 166666,
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
-			FE_CAN_RECOVER
-	},
-
-	.release = sp887x_release,
-
-	.init = sp887x_init,
-	.sleep = sp887x_sleep,
-	.i2c_gate_ctrl = sp887x_i2c_gate_ctrl,
-
-	.set_frontend = sp887x_setup_frontend_parameters,
-	.get_tune_settings = sp887x_get_tune_settings,
-
-	.read_status = sp887x_read_status,
-	.read_ber = sp887x_read_ber,
-	.read_signal_strength = sp887x_read_signal_strength,
-	.read_snr = sp887x_read_snr,
-	.read_ucblocks = sp887x_read_ucblocks,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("Spase sp887x DVB-T demodulator driver");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(sp887x_attach);
diff --git a/drivers/media/dvb/frontends/sp887x.h b/drivers/media/dvb/frontends/sp887x.h
deleted file mode 100644
index 04eff6e..0000000
--- a/drivers/media/dvb/frontends/sp887x.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
-   Driver for the Spase sp887x demodulator
-*/
-
-#ifndef SP887X_H
-#define SP887X_H
-
-#include <linux/dvb/frontend.h>
-#include <linux/firmware.h>
-
-struct sp887x_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* request firmware for device */
-	int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
-};
-
-#if defined(CONFIG_DVB_SP887X) || (defined(CONFIG_DVB_SP887X_MODULE) && defined(MODULE))
-extern struct dvb_frontend* sp887x_attach(const struct sp887x_config* config,
-					  struct i2c_adapter* i2c);
-#else
-static inline struct dvb_frontend* sp887x_attach(const struct sp887x_config* config,
-					  struct i2c_adapter* i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_SP887X
-
-#endif // SP887X_H
diff --git a/drivers/media/dvb/frontends/stb0899_algo.c b/drivers/media/dvb/frontends/stb0899_algo.c
deleted file mode 100644
index 117a569..0000000
--- a/drivers/media/dvb/frontends/stb0899_algo.c
+++ /dev/null
@@ -1,1525 +0,0 @@
-/*
-	STB0899 Multistandard Frontend driver
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	Copyright (C) ST Microelectronics
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include "stb0899_drv.h"
-#include "stb0899_priv.h"
-#include "stb0899_reg.h"
-
-static inline u32 stb0899_do_div(u64 n, u32 d)
-{
-	/* wrap do_div() for ease of use */
-
-	do_div(n, d);
-	return n;
-}
-
-#if 0
-/* These functions are currently unused */
-/*
- * stb0899_calc_srate
- * Compute symbol rate
- */
-static u32 stb0899_calc_srate(u32 master_clk, u8 *sfr)
-{
-	u64 tmp;
-
-	/* srate = (SFR * master_clk) >> 20 */
-
-	/* sfr is of size 20 bit, stored with an offset of 4 bit */
-	tmp = (((u32)sfr[0]) << 16) | (((u32)sfr[1]) << 8) | sfr[2];
-	tmp &= ~0xf;
-	tmp *= master_clk;
-	tmp >>= 24;
-
-	return tmp;
-}
-
-/*
- * stb0899_get_srate
- * Get the current symbol rate
- */
-static u32 stb0899_get_srate(struct stb0899_state *state)
-{
-	struct stb0899_internal *internal = &state->internal;
-	u8 sfr[3];
-
-	stb0899_read_regs(state, STB0899_SFRH, sfr, 3);
-
-	return stb0899_calc_srate(internal->master_clk, sfr);
-}
-#endif
-
-/*
- * stb0899_set_srate
- * Set symbol frequency
- * MasterClock: master clock frequency (hz)
- * SymbolRate: symbol rate (bauds)
- * return symbol frequency
- */
-static u32 stb0899_set_srate(struct stb0899_state *state, u32 master_clk, u32 srate)
-{
-	u32 tmp;
-	u8 sfr[3];
-
-	dprintk(state->verbose, FE_DEBUG, 1, "-->");
-	/*
-	 * in order to have the maximum precision, the symbol rate entered into
-	 * the chip is computed as the closest value of the "true value".
-	 * In this purpose, the symbol rate value is rounded (1 is added on the bit
-	 * below the LSB )
-	 *
-	 * srate = (SFR * master_clk) >> 20
-	 *      <=>
-	 *   SFR = srate << 20 / master_clk
-	 *
-	 * rounded:
-	 *   SFR = (srate << 21 + master_clk) / (2 * master_clk)
-	 *
-	 * stored as 20 bit number with an offset of 4 bit:
-	 *   sfr = SFR << 4;
-	 */
-
-	tmp = stb0899_do_div((((u64)srate) << 21) + master_clk, 2 * master_clk);
-	tmp <<= 4;
-
-	sfr[0] = tmp >> 16;
-	sfr[1] = tmp >>  8;
-	sfr[2] = tmp;
-
-	stb0899_write_regs(state, STB0899_SFRH, sfr, 3);
-
-	return srate;
-}
-
-/*
- * stb0899_calc_derot_time
- * Compute the amount of time needed by the derotator to lock
- * SymbolRate: Symbol rate
- * return: derotator time constant (ms)
- */
-static long stb0899_calc_derot_time(long srate)
-{
-	if (srate > 0)
-		return (100000 / (srate / 1000));
-	else
-		return 0;
-}
-
-/*
- * stb0899_carr_width
- * Compute the width of the carrier
- * return: width of carrier (kHz or Mhz)
- */
-long stb0899_carr_width(struct stb0899_state *state)
-{
-	struct stb0899_internal *internal = &state->internal;
-
-	return (internal->srate + (internal->srate * internal->rolloff) / 100);
-}
-
-/*
- * stb0899_first_subrange
- * Compute the first subrange of the search
- */
-static void stb0899_first_subrange(struct stb0899_state *state)
-{
-	struct stb0899_internal *internal	= &state->internal;
-	struct stb0899_params *params		= &state->params;
-	struct stb0899_config *config		=  state->config;
-
-	int range = 0;
-	u32 bandwidth = 0;
-
-	if (config->tuner_get_bandwidth) {
-		stb0899_i2c_gate_ctrl(&state->frontend, 1);
-		config->tuner_get_bandwidth(&state->frontend, &bandwidth);
-		stb0899_i2c_gate_ctrl(&state->frontend, 0);
-		range = bandwidth - stb0899_carr_width(state) / 2;
-	}
-
-	if (range > 0)
-		internal->sub_range = min(internal->srch_range, range);
-	else
-		internal->sub_range = 0;
-
-	internal->freq = params->freq;
-	internal->tuner_offst = 0L;
-	internal->sub_dir = 1;
-}
-
-/*
- * stb0899_check_tmg
- * check for timing lock
- * internal.Ttiming: time to wait for loop lock
- */
-static enum stb0899_status stb0899_check_tmg(struct stb0899_state *state)
-{
-	struct stb0899_internal *internal = &state->internal;
-	int lock;
-	u8 reg;
-	s8 timing;
-
-	msleep(internal->t_derot);
-
-	stb0899_write_reg(state, STB0899_RTF, 0xf2);
-	reg = stb0899_read_reg(state, STB0899_TLIR);
-	lock = STB0899_GETFIELD(TLIR_TMG_LOCK_IND, reg);
-	timing = stb0899_read_reg(state, STB0899_RTF);
-
-	if (lock >= 42) {
-		if ((lock > 48) && (abs(timing) >= 110)) {
-			internal->status = ANALOGCARRIER;
-			dprintk(state->verbose, FE_DEBUG, 1, "-->ANALOG Carrier !");
-		} else {
-			internal->status = TIMINGOK;
-			dprintk(state->verbose, FE_DEBUG, 1, "------->TIMING OK !");
-		}
-	} else {
-		internal->status = NOTIMING;
-		dprintk(state->verbose, FE_DEBUG, 1, "-->NO TIMING !");
-	}
-	return internal->status;
-}
-
-/*
- * stb0899_search_tmg
- * perform a fs/2 zig-zag to find timing
- */
-static enum stb0899_status stb0899_search_tmg(struct stb0899_state *state)
-{
-	struct stb0899_internal *internal = &state->internal;
-	struct stb0899_params *params = &state->params;
-
-	short int derot_step, derot_freq = 0, derot_limit, next_loop = 3;
-	int index = 0;
-	u8 cfr[2];
-
-	internal->status = NOTIMING;
-
-	/* timing loop computation & symbol rate optimisation	*/
-	derot_limit = (internal->sub_range / 2L) / internal->mclk;
-	derot_step = (params->srate / 2L) / internal->mclk;
-
-	while ((stb0899_check_tmg(state) != TIMINGOK) && next_loop) {
-		index++;
-		derot_freq += index * internal->direction * derot_step;	/* next derot zig zag position	*/
-
-		if (abs(derot_freq) > derot_limit)
-			next_loop--;
-
-		if (next_loop) {
-			STB0899_SETFIELD_VAL(CFRM, cfr[0], MSB(state->config->inversion * derot_freq));
-			STB0899_SETFIELD_VAL(CFRL, cfr[1], LSB(state->config->inversion * derot_freq));
-			stb0899_write_regs(state, STB0899_CFRM, cfr, 2); /* derotator frequency		*/
-		}
-		internal->direction = -internal->direction;	/* Change zigzag direction		*/
-	}
-
-	if (internal->status == TIMINGOK) {
-		stb0899_read_regs(state, STB0899_CFRM, cfr, 2); /* get derotator frequency		*/
-		internal->derot_freq = state->config->inversion * MAKEWORD16(cfr[0], cfr[1]);
-		dprintk(state->verbose, FE_DEBUG, 1, "------->TIMING OK ! Derot Freq = %d", internal->derot_freq);
-	}
-
-	return internal->status;
-}
-
-/*
- * stb0899_check_carrier
- * Check for carrier found
- */
-static enum stb0899_status stb0899_check_carrier(struct stb0899_state *state)
-{
-	struct stb0899_internal *internal = &state->internal;
-	u8 reg;
-
-	msleep(internal->t_derot); /* wait for derotator ok	*/
-
-	reg = stb0899_read_reg(state, STB0899_CFD);
-	STB0899_SETFIELD_VAL(CFD_ON, reg, 1);
-	stb0899_write_reg(state, STB0899_CFD, reg);
-
-	reg = stb0899_read_reg(state, STB0899_DSTATUS);
-	dprintk(state->verbose, FE_DEBUG, 1, "--------------------> STB0899_DSTATUS=[0x%02x]", reg);
-	if (STB0899_GETFIELD(CARRIER_FOUND, reg)) {
-		internal->status = CARRIEROK;
-		dprintk(state->verbose, FE_DEBUG, 1, "-------------> CARRIEROK !");
-	} else {
-		internal->status = NOCARRIER;
-		dprintk(state->verbose, FE_DEBUG, 1, "-------------> NOCARRIER !");
-	}
-
-	return internal->status;
-}
-
-/*
- * stb0899_search_carrier
- * Search for a QPSK carrier with the derotator
- */
-static enum stb0899_status stb0899_search_carrier(struct stb0899_state *state)
-{
-	struct stb0899_internal *internal = &state->internal;
-
-	short int derot_freq = 0, last_derot_freq = 0, derot_limit, next_loop = 3;
-	int index = 0;
-	u8 cfr[2];
-	u8 reg;
-
-	internal->status = NOCARRIER;
-	derot_limit = (internal->sub_range / 2L) / internal->mclk;
-	derot_freq = internal->derot_freq;
-
-	reg = stb0899_read_reg(state, STB0899_CFD);
-	STB0899_SETFIELD_VAL(CFD_ON, reg, 1);
-	stb0899_write_reg(state, STB0899_CFD, reg);
-
-	do {
-		dprintk(state->verbose, FE_DEBUG, 1, "Derot Freq=%d, mclk=%d", derot_freq, internal->mclk);
-		if (stb0899_check_carrier(state) == NOCARRIER) {
-			index++;
-			last_derot_freq = derot_freq;
-			derot_freq += index * internal->direction * internal->derot_step; /* next zig zag derotator position */
-
-			if(abs(derot_freq) > derot_limit)
-				next_loop--;
-
-			if (next_loop) {
-				reg = stb0899_read_reg(state, STB0899_CFD);
-				STB0899_SETFIELD_VAL(CFD_ON, reg, 1);
-				stb0899_write_reg(state, STB0899_CFD, reg);
-
-				STB0899_SETFIELD_VAL(CFRM, cfr[0], MSB(state->config->inversion * derot_freq));
-				STB0899_SETFIELD_VAL(CFRL, cfr[1], LSB(state->config->inversion * derot_freq));
-				stb0899_write_regs(state, STB0899_CFRM, cfr, 2); /* derotator frequency	*/
-			}
-		}
-
-		internal->direction = -internal->direction; /* Change zigzag direction */
-	} while ((internal->status != CARRIEROK) && next_loop);
-
-	if (internal->status == CARRIEROK) {
-		stb0899_read_regs(state, STB0899_CFRM, cfr, 2); /* get derotator frequency */
-		internal->derot_freq = state->config->inversion * MAKEWORD16(cfr[0], cfr[1]);
-		dprintk(state->verbose, FE_DEBUG, 1, "----> CARRIER OK !, Derot Freq=%d", internal->derot_freq);
-	} else {
-		internal->derot_freq = last_derot_freq;
-	}
-
-	return internal->status;
-}
-
-/*
- * stb0899_check_data
- * Check for data found
- */
-static enum stb0899_status stb0899_check_data(struct stb0899_state *state)
-{
-	struct stb0899_internal *internal = &state->internal;
-	struct stb0899_params *params = &state->params;
-
-	int lock = 0, index = 0, dataTime = 500, loop;
-	u8 reg;
-
-	internal->status = NODATA;
-
-	/* RESET FEC	*/
-	reg = stb0899_read_reg(state, STB0899_TSTRES);
-	STB0899_SETFIELD_VAL(FRESACS, reg, 1);
-	stb0899_write_reg(state, STB0899_TSTRES, reg);
-	msleep(1);
-	reg = stb0899_read_reg(state, STB0899_TSTRES);
-	STB0899_SETFIELD_VAL(FRESACS, reg, 0);
-	stb0899_write_reg(state, STB0899_TSTRES, reg);
-
-	if (params->srate <= 2000000)
-		dataTime = 2000;
-	else if (params->srate <= 5000000)
-		dataTime = 1500;
-	else if (params->srate <= 15000000)
-		dataTime = 1000;
-	else
-		dataTime = 500;
-
-	/* clear previous failed END_LOOPVIT */
-	stb0899_read_reg(state, STB0899_VSTATUS);
-
-	stb0899_write_reg(state, STB0899_DSTATUS2, 0x00); /* force search loop	*/
-	while (1) {
-		/* WARNING! VIT LOCKED has to be tested before VIT_END_LOOOP	*/
-		reg = stb0899_read_reg(state, STB0899_VSTATUS);
-		lock = STB0899_GETFIELD(VSTATUS_LOCKEDVIT, reg);
-		loop = STB0899_GETFIELD(VSTATUS_END_LOOPVIT, reg);
-
-		if (lock || loop || (index > dataTime))
-			break;
-		index++;
-	}
-
-	if (lock) {	/* DATA LOCK indicator	*/
-		internal->status = DATAOK;
-		dprintk(state->verbose, FE_DEBUG, 1, "-----------------> DATA OK !");
-	}
-
-	return internal->status;
-}
-
-/*
- * stb0899_search_data
- * Search for a QPSK carrier with the derotator
- */
-static enum stb0899_status stb0899_search_data(struct stb0899_state *state)
-{
-	short int derot_freq, derot_step, derot_limit, next_loop = 3;
-	u8 cfr[2];
-	u8 reg;
-	int index = 1;
-
-	struct stb0899_internal *internal = &state->internal;
-	struct stb0899_params *params = &state->params;
-
-	derot_step = (params->srate / 4L) / internal->mclk;
-	derot_limit = (internal->sub_range / 2L) / internal->mclk;
-	derot_freq = internal->derot_freq;
-
-	do {
-		if ((internal->status != CARRIEROK) || (stb0899_check_data(state) != DATAOK)) {
-
-			derot_freq += index * internal->direction * derot_step;	/* next zig zag derotator position */
-			if (abs(derot_freq) > derot_limit)
-				next_loop--;
-
-			if (next_loop) {
-				dprintk(state->verbose, FE_DEBUG, 1, "Derot freq=%d, mclk=%d", derot_freq, internal->mclk);
-				reg = stb0899_read_reg(state, STB0899_CFD);
-				STB0899_SETFIELD_VAL(CFD_ON, reg, 1);
-				stb0899_write_reg(state, STB0899_CFD, reg);
-
-				STB0899_SETFIELD_VAL(CFRM, cfr[0], MSB(state->config->inversion * derot_freq));
-				STB0899_SETFIELD_VAL(CFRL, cfr[1], LSB(state->config->inversion * derot_freq));
-				stb0899_write_regs(state, STB0899_CFRM, cfr, 2); /* derotator frequency	*/
-
-				stb0899_check_carrier(state);
-				index++;
-			}
-		}
-		internal->direction = -internal->direction; /* change zig zag direction */
-	} while ((internal->status != DATAOK) && next_loop);
-
-	if (internal->status == DATAOK) {
-		stb0899_read_regs(state, STB0899_CFRM, cfr, 2); /* get derotator frequency */
-		internal->derot_freq = state->config->inversion * MAKEWORD16(cfr[0], cfr[1]);
-		dprintk(state->verbose, FE_DEBUG, 1, "------> DATAOK ! Derot Freq=%d", internal->derot_freq);
-	}
-
-	return internal->status;
-}
-
-/*
- * stb0899_check_range
- * check if the found frequency is in the correct range
- */
-static enum stb0899_status stb0899_check_range(struct stb0899_state *state)
-{
-	struct stb0899_internal *internal = &state->internal;
-	struct stb0899_params *params = &state->params;
-
-	int range_offst, tp_freq;
-
-	range_offst = internal->srch_range / 2000;
-	tp_freq = internal->freq + (internal->derot_freq * internal->mclk) / 1000;
-
-	if ((tp_freq >= params->freq - range_offst) && (tp_freq <= params->freq + range_offst)) {
-		internal->status = RANGEOK;
-		dprintk(state->verbose, FE_DEBUG, 1, "----> RANGEOK !");
-	} else {
-		internal->status = OUTOFRANGE;
-		dprintk(state->verbose, FE_DEBUG, 1, "----> OUT OF RANGE !");
-	}
-
-	return internal->status;
-}
-
-/*
- * NextSubRange
- * Compute the next subrange of the search
- */
-static void next_sub_range(struct stb0899_state *state)
-{
-	struct stb0899_internal *internal = &state->internal;
-	struct stb0899_params *params = &state->params;
-
-	long old_sub_range;
-
-	if (internal->sub_dir > 0) {
-		old_sub_range = internal->sub_range;
-		internal->sub_range = min((internal->srch_range / 2) -
-					  (internal->tuner_offst + internal->sub_range / 2),
-					   internal->sub_range);
-
-		if (internal->sub_range < 0)
-			internal->sub_range = 0;
-
-		internal->tuner_offst += (old_sub_range + internal->sub_range) / 2;
-	}
-
-	internal->freq = params->freq + (internal->sub_dir * internal->tuner_offst) / 1000;
-	internal->sub_dir = -internal->sub_dir;
-}
-
-/*
- * stb0899_dvbs_algo
- * Search for a signal, timing, carrier and data for a
- * given frequency in a given range
- */
-enum stb0899_status stb0899_dvbs_algo(struct stb0899_state *state)
-{
-	struct stb0899_params *params		= &state->params;
-	struct stb0899_internal *internal	= &state->internal;
-	struct stb0899_config *config		= state->config;
-
-	u8 bclc, reg;
-	u8 cfr[2];
-	u8 eq_const[10];
-	s32 clnI = 3;
-	u32 bandwidth = 0;
-
-	/* BETA values rated @ 99MHz	*/
-	s32 betaTab[5][4] = {
-	       /*  5   10   20   30MBps */
-		{ 37,  34,  32,  31 }, /* QPSK 1/2	*/
-		{ 37,  35,  33,  31 }, /* QPSK 2/3	*/
-		{ 37,  35,  33,  31 }, /* QPSK 3/4	*/
-		{ 37,  36,  33,	 32 }, /* QPSK 5/6	*/
-		{ 37,  36,  33,	 32 }  /* QPSK 7/8	*/
-	};
-
-	internal->direction = 1;
-
-	stb0899_set_srate(state, internal->master_clk, params->srate);
-	/* Carrier loop optimization versus symbol rate for acquisition*/
-	if (params->srate <= 5000000) {
-		stb0899_write_reg(state, STB0899_ACLC, 0x89);
-		bclc = stb0899_read_reg(state, STB0899_BCLC);
-		STB0899_SETFIELD_VAL(BETA, bclc, 0x1c);
-		stb0899_write_reg(state, STB0899_BCLC, bclc);
-		clnI = 0;
-	} else if (params->srate <= 15000000) {
-		stb0899_write_reg(state, STB0899_ACLC, 0xc9);
-		bclc = stb0899_read_reg(state, STB0899_BCLC);
-		STB0899_SETFIELD_VAL(BETA, bclc, 0x22);
-		stb0899_write_reg(state, STB0899_BCLC, bclc);
-		clnI = 1;
-	} else if(params->srate <= 25000000) {
-		stb0899_write_reg(state, STB0899_ACLC, 0x89);
-		bclc = stb0899_read_reg(state, STB0899_BCLC);
-		STB0899_SETFIELD_VAL(BETA, bclc, 0x27);
-		stb0899_write_reg(state, STB0899_BCLC, bclc);
-		clnI = 2;
-	} else {
-		stb0899_write_reg(state, STB0899_ACLC, 0xc8);
-		bclc = stb0899_read_reg(state, STB0899_BCLC);
-		STB0899_SETFIELD_VAL(BETA, bclc, 0x29);
-		stb0899_write_reg(state, STB0899_BCLC, bclc);
-		clnI = 3;
-	}
-
-	dprintk(state->verbose, FE_DEBUG, 1, "Set the timing loop to acquisition");
-	/* Set the timing loop to acquisition	*/
-	stb0899_write_reg(state, STB0899_RTC, 0x46);
-	stb0899_write_reg(state, STB0899_CFD, 0xee);
-
-	/* !! WARNING !!
-	 * Do not read any status variables while acquisition,
-	 * If any needed, read before the acquisition starts
-	 * querying status while acquiring causes the
-	 * acquisition to go bad and hence no locks.
-	 */
-	dprintk(state->verbose, FE_DEBUG, 1, "Derot Percent=%d Srate=%d mclk=%d",
-		internal->derot_percent, params->srate, internal->mclk);
-
-	/* Initial calculations	*/
-	internal->derot_step = internal->derot_percent * (params->srate / 1000L) / internal->mclk; /* DerotStep/1000 * Fsymbol	*/
-	internal->t_derot = stb0899_calc_derot_time(params->srate);
-	internal->t_data = 500;
-
-	dprintk(state->verbose, FE_DEBUG, 1, "RESET stream merger");
-	/* RESET Stream merger	*/
-	reg = stb0899_read_reg(state, STB0899_TSTRES);
-	STB0899_SETFIELD_VAL(FRESRS, reg, 1);
-	stb0899_write_reg(state, STB0899_TSTRES, reg);
-
-	/*
-	 * Set KDIVIDER to an intermediate value between
-	 * 1/2 and 7/8 for acquisition
-	 */
-	reg = stb0899_read_reg(state, STB0899_DEMAPVIT);
-	STB0899_SETFIELD_VAL(DEMAPVIT_KDIVIDER, reg, 60);
-	stb0899_write_reg(state, STB0899_DEMAPVIT, reg);
-
-	stb0899_write_reg(state, STB0899_EQON, 0x01); /* Equalizer OFF while acquiring */
-	stb0899_write_reg(state, STB0899_VITSYNC, 0x19);
-
-	stb0899_first_subrange(state);
-	do {
-		/* Initialisations */
-		cfr[0] = cfr[1] = 0;
-		stb0899_write_regs(state, STB0899_CFRM, cfr, 2); /* RESET derotator frequency	*/
-
-		stb0899_write_reg(state, STB0899_RTF, 0);
-		reg = stb0899_read_reg(state, STB0899_CFD);
-		STB0899_SETFIELD_VAL(CFD_ON, reg, 1);
-		stb0899_write_reg(state, STB0899_CFD, reg);
-
-		internal->derot_freq = 0;
-		internal->status = NOAGC1;
-
-		/* enable tuner I/O */
-		stb0899_i2c_gate_ctrl(&state->frontend, 1);
-
-		/* Move tuner to frequency */
-		dprintk(state->verbose, FE_DEBUG, 1, "Tuner set frequency");
-		if (state->config->tuner_set_frequency)
-			state->config->tuner_set_frequency(&state->frontend, internal->freq);
-
-		if (state->config->tuner_get_frequency)
-			state->config->tuner_get_frequency(&state->frontend, &internal->freq);
-
-		msleep(internal->t_agc1 + internal->t_agc2 + internal->t_derot); /* AGC1, AGC2 and timing loop	*/
-		dprintk(state->verbose, FE_DEBUG, 1, "current derot freq=%d", internal->derot_freq);
-		internal->status = AGC1OK;
-
-		/* There is signal in the band	*/
-		if (config->tuner_get_bandwidth)
-			config->tuner_get_bandwidth(&state->frontend, &bandwidth);
-
-		/* disable tuner I/O */
-		stb0899_i2c_gate_ctrl(&state->frontend, 0);
-
-		if (params->srate <= bandwidth / 2)
-			stb0899_search_tmg(state); /* For low rates (SCPC)	*/
-		else
-			stb0899_check_tmg(state); /* For high rates (MCPC)	*/
-
-		if (internal->status == TIMINGOK) {
-			dprintk(state->verbose, FE_DEBUG, 1,
-				"TIMING OK ! Derot freq=%d, mclk=%d",
-				internal->derot_freq, internal->mclk);
-
-			if (stb0899_search_carrier(state) == CARRIEROK) {	/* Search for carrier	*/
-				dprintk(state->verbose, FE_DEBUG, 1,
-					"CARRIER OK ! Derot freq=%d, mclk=%d",
-					internal->derot_freq, internal->mclk);
-
-				if (stb0899_search_data(state) == DATAOK) {	/* Check for data	*/
-					dprintk(state->verbose, FE_DEBUG, 1,
-						"DATA OK ! Derot freq=%d, mclk=%d",
-						internal->derot_freq, internal->mclk);
-
-					if (stb0899_check_range(state) == RANGEOK) {
-						dprintk(state->verbose, FE_DEBUG, 1,
-							"RANGE OK ! derot freq=%d, mclk=%d",
-							internal->derot_freq, internal->mclk);
-
-						internal->freq = params->freq + ((internal->derot_freq * internal->mclk) / 1000);
-						reg = stb0899_read_reg(state, STB0899_PLPARM);
-						internal->fecrate = STB0899_GETFIELD(VITCURPUN, reg);
-						dprintk(state->verbose, FE_DEBUG, 1,
-							"freq=%d, internal resultant freq=%d",
-							params->freq, internal->freq);
-
-						dprintk(state->verbose, FE_DEBUG, 1,
-							"internal puncture rate=%d",
-							internal->fecrate);
-					}
-				}
-			}
-		}
-		if (internal->status != RANGEOK)
-			next_sub_range(state);
-
-	} while (internal->sub_range && internal->status != RANGEOK);
-
-	/* Set the timing loop to tracking	*/
-	stb0899_write_reg(state, STB0899_RTC, 0x33);
-	stb0899_write_reg(state, STB0899_CFD, 0xf7);
-	/* if locked and range ok, set Kdiv	*/
-	if (internal->status == RANGEOK) {
-		dprintk(state->verbose, FE_DEBUG, 1, "Locked & Range OK !");
-		stb0899_write_reg(state, STB0899_EQON, 0x41);		/* Equalizer OFF while acquiring	*/
-		stb0899_write_reg(state, STB0899_VITSYNC, 0x39);	/* SN to b'11 for acquisition		*/
-
-		/*
-		 * Carrier loop optimization versus
-		 * symbol Rate/Puncture Rate for Tracking
-		 */
-		reg = stb0899_read_reg(state, STB0899_BCLC);
-		switch (internal->fecrate) {
-		case STB0899_FEC_1_2:		/* 13	*/
-			stb0899_write_reg(state, STB0899_DEMAPVIT, 0x1a);
-			STB0899_SETFIELD_VAL(BETA, reg, betaTab[0][clnI]);
-			stb0899_write_reg(state, STB0899_BCLC, reg);
-			break;
-		case STB0899_FEC_2_3:		/* 18	*/
-			stb0899_write_reg(state, STB0899_DEMAPVIT, 44);
-			STB0899_SETFIELD_VAL(BETA, reg, betaTab[1][clnI]);
-			stb0899_write_reg(state, STB0899_BCLC, reg);
-			break;
-		case STB0899_FEC_3_4:		/* 21	*/
-			stb0899_write_reg(state, STB0899_DEMAPVIT, 60);
-			STB0899_SETFIELD_VAL(BETA, reg, betaTab[2][clnI]);
-			stb0899_write_reg(state, STB0899_BCLC, reg);
-			break;
-		case STB0899_FEC_5_6:		/* 24	*/
-			stb0899_write_reg(state, STB0899_DEMAPVIT, 75);
-			STB0899_SETFIELD_VAL(BETA, reg, betaTab[3][clnI]);
-			stb0899_write_reg(state, STB0899_BCLC, reg);
-			break;
-		case STB0899_FEC_6_7:		/* 25	*/
-			stb0899_write_reg(state, STB0899_DEMAPVIT, 88);
-			stb0899_write_reg(state, STB0899_ACLC, 0x88);
-			stb0899_write_reg(state, STB0899_BCLC, 0x9a);
-			break;
-		case STB0899_FEC_7_8:		/* 26	*/
-			stb0899_write_reg(state, STB0899_DEMAPVIT, 94);
-			STB0899_SETFIELD_VAL(BETA, reg, betaTab[4][clnI]);
-			stb0899_write_reg(state, STB0899_BCLC, reg);
-			break;
-		default:
-			dprintk(state->verbose, FE_DEBUG, 1, "Unsupported Puncture Rate");
-			break;
-		}
-		/* release stream merger RESET	*/
-		reg = stb0899_read_reg(state, STB0899_TSTRES);
-		STB0899_SETFIELD_VAL(FRESRS, reg, 0);
-		stb0899_write_reg(state, STB0899_TSTRES, reg);
-
-		/* disable carrier detector	*/
-		reg = stb0899_read_reg(state, STB0899_CFD);
-		STB0899_SETFIELD_VAL(CFD_ON, reg, 0);
-		stb0899_write_reg(state, STB0899_CFD, reg);
-
-		stb0899_read_regs(state, STB0899_EQUAI1, eq_const, 10);
-	}
-
-	return internal->status;
-}
-
-/*
- * stb0899_dvbs2_config_uwp
- * Configure UWP state machine
- */
-static void stb0899_dvbs2_config_uwp(struct stb0899_state *state)
-{
-	struct stb0899_internal *internal = &state->internal;
-	struct stb0899_config *config = state->config;
-	u32 uwp1, uwp2, uwp3, reg;
-
-	uwp1 = STB0899_READ_S2REG(STB0899_S2DEMOD, UWP_CNTRL1);
-	uwp2 = STB0899_READ_S2REG(STB0899_S2DEMOD, UWP_CNTRL2);
-	uwp3 = STB0899_READ_S2REG(STB0899_S2DEMOD, UWP_CNTRL3);
-
-	STB0899_SETFIELD_VAL(UWP_ESN0_AVE, uwp1, config->esno_ave);
-	STB0899_SETFIELD_VAL(UWP_ESN0_QUANT, uwp1, config->esno_quant);
-	STB0899_SETFIELD_VAL(UWP_TH_SOF, uwp1, config->uwp_threshold_sof);
-
-	STB0899_SETFIELD_VAL(FE_COARSE_TRK, uwp2, internal->av_frame_coarse);
-	STB0899_SETFIELD_VAL(FE_FINE_TRK, uwp2, internal->av_frame_fine);
-	STB0899_SETFIELD_VAL(UWP_MISS_TH, uwp2, config->miss_threshold);
-
-	STB0899_SETFIELD_VAL(UWP_TH_ACQ, uwp3, config->uwp_threshold_acq);
-	STB0899_SETFIELD_VAL(UWP_TH_TRACK, uwp3, config->uwp_threshold_track);
-
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_UWP_CNTRL1, STB0899_OFF0_UWP_CNTRL1, uwp1);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_UWP_CNTRL2, STB0899_OFF0_UWP_CNTRL2, uwp2);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_UWP_CNTRL3, STB0899_OFF0_UWP_CNTRL3, uwp3);
-
-	reg = STB0899_READ_S2REG(STB0899_S2DEMOD, SOF_SRCH_TO);
-	STB0899_SETFIELD_VAL(SOF_SEARCH_TIMEOUT, reg, config->sof_search_timeout);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_SOF_SRCH_TO, STB0899_OFF0_SOF_SRCH_TO, reg);
-}
-
-/*
- * stb0899_dvbs2_config_csm_auto
- * Set CSM to AUTO mode
- */
-static void stb0899_dvbs2_config_csm_auto(struct stb0899_state *state)
-{
-	u32 reg;
-
-	reg = STB0899_READ_S2REG(STB0899_S2DEMOD, CSM_CNTRL1);
-	STB0899_SETFIELD_VAL(CSM_AUTO_PARAM, reg, 1);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CSM_CNTRL1, STB0899_OFF0_CSM_CNTRL1, reg);
-}
-
-static long Log2Int(int number)
-{
-	int i;
-
-	i = 0;
-	while ((1 << i) <= abs(number))
-		i++;
-
-	if (number == 0)
-		i = 1;
-
-	return i - 1;
-}
-
-/*
- * stb0899_dvbs2_calc_srate
- * compute BTR_NOM_FREQ for the symbol rate
- */
-static u32 stb0899_dvbs2_calc_srate(struct stb0899_state *state)
-{
-	struct stb0899_internal *internal	= &state->internal;
-	struct stb0899_config *config		= state->config;
-
-	u32 dec_ratio, dec_rate, decim, remain, intval, btr_nom_freq;
-	u32 master_clk, srate;
-
-	dec_ratio = (internal->master_clk * 2) / (5 * internal->srate);
-	dec_ratio = (dec_ratio == 0) ? 1 : dec_ratio;
-	dec_rate = Log2Int(dec_ratio);
-	decim = 1 << dec_rate;
-	master_clk = internal->master_clk / 1000;
-	srate = internal->srate / 1000;
-
-	if (decim <= 4) {
-		intval = (decim * (1 << (config->btr_nco_bits - 1))) / master_clk;
-		remain = (decim * (1 << (config->btr_nco_bits - 1))) % master_clk;
-	} else {
-		intval = (1 << (config->btr_nco_bits - 1)) / (master_clk / 100) * decim / 100;
-		remain = (decim * (1 << (config->btr_nco_bits - 1))) % master_clk;
-	}
-	btr_nom_freq = (intval * srate) + ((remain * srate) / master_clk);
-
-	return btr_nom_freq;
-}
-
-/*
- * stb0899_dvbs2_calc_dev
- * compute the correction to be applied to symbol rate
- */
-static u32 stb0899_dvbs2_calc_dev(struct stb0899_state *state)
-{
-	struct stb0899_internal *internal = &state->internal;
-	u32 dec_ratio, correction, master_clk, srate;
-
-	dec_ratio = (internal->master_clk * 2) / (5 * internal->srate);
-	dec_ratio = (dec_ratio == 0) ? 1 : dec_ratio;
-
-	master_clk = internal->master_clk / 1000;	/* for integer Caculation*/
-	srate = internal->srate / 1000;	/* for integer Caculation*/
-	correction = (512 * master_clk) / (2 * dec_ratio * srate);
-
-	return	correction;
-}
-
-/*
- * stb0899_dvbs2_set_srate
- * Set DVBS2 symbol rate
- */
-static void stb0899_dvbs2_set_srate(struct stb0899_state *state)
-{
-	struct stb0899_internal *internal = &state->internal;
-
-	u32 dec_ratio, dec_rate, win_sel, decim, f_sym, btr_nom_freq;
-	u32 correction, freq_adj, band_lim, decim_cntrl, reg;
-	u8 anti_alias;
-
-	/*set decimation to 1*/
-	dec_ratio = (internal->master_clk * 2) / (5 * internal->srate);
-	dec_ratio = (dec_ratio == 0) ? 1 : dec_ratio;
-	dec_rate = Log2Int(dec_ratio);
-
-	win_sel = 0;
-	if (dec_rate >= 5)
-		win_sel = dec_rate - 4;
-
-	decim = (1 << dec_rate);
-	/* (FSamp/Fsymbol *100) for integer Caculation */
-	f_sym = internal->master_clk / ((decim * internal->srate) / 1000);
-
-	if (f_sym <= 2250)	/* don't band limit signal going into btr block*/
-		band_lim = 1;
-	else
-		band_lim = 0;	/* band limit signal going into btr block*/
-
-	decim_cntrl = ((win_sel << 3) & 0x18) + ((band_lim << 5) & 0x20) + (dec_rate & 0x7);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_DECIM_CNTRL, STB0899_OFF0_DECIM_CNTRL, decim_cntrl);
-
-	if (f_sym <= 3450)
-		anti_alias = 0;
-	else if (f_sym <= 4250)
-		anti_alias = 1;
-	else
-		anti_alias = 2;
-
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_ANTI_ALIAS_SEL, STB0899_OFF0_ANTI_ALIAS_SEL, anti_alias);
-	btr_nom_freq = stb0899_dvbs2_calc_srate(state);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_BTR_NOM_FREQ, STB0899_OFF0_BTR_NOM_FREQ, btr_nom_freq);
-
-	correction = stb0899_dvbs2_calc_dev(state);
-	reg = STB0899_READ_S2REG(STB0899_S2DEMOD, BTR_CNTRL);
-	STB0899_SETFIELD_VAL(BTR_FREQ_CORR, reg, correction);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_BTR_CNTRL, STB0899_OFF0_BTR_CNTRL, reg);
-
-	/* scale UWP+CSM frequency to sample rate*/
-	freq_adj =  internal->srate / (internal->master_clk / 4096);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_FREQ_ADJ_SCALE, STB0899_OFF0_FREQ_ADJ_SCALE, freq_adj);
-}
-
-/*
- * stb0899_dvbs2_set_btr_loopbw
- * set bit timing loop bandwidth as a percentage of the symbol rate
- */
-static void stb0899_dvbs2_set_btr_loopbw(struct stb0899_state *state)
-{
-	struct stb0899_internal *internal	= &state->internal;
-	struct stb0899_config *config		= state->config;
-
-	u32 sym_peak = 23, zeta = 707, loopbw_percent = 60;
-	s32 dec_ratio, dec_rate, k_btr1_rshft, k_btr1, k_btr0_rshft;
-	s32 k_btr0, k_btr2_rshft, k_direct_shift, k_indirect_shift;
-	u32 decim, K, wn, k_direct, k_indirect;
-	u32 reg;
-
-	dec_ratio = (internal->master_clk * 2) / (5 * internal->srate);
-	dec_ratio = (dec_ratio == 0) ? 1 : dec_ratio;
-	dec_rate = Log2Int(dec_ratio);
-	decim = (1 << dec_rate);
-
-	sym_peak *= 576000;
-	K = (1 << config->btr_nco_bits) / (internal->master_clk / 1000);
-	K *= (internal->srate / 1000000) * decim; /*k=k 10^-8*/
-
-	if (K != 0) {
-		K = sym_peak / K;
-		wn = (4 * zeta * zeta) + 1000000;
-		wn = (2 * (loopbw_percent * 1000) * 40 * zeta) /wn;  /*wn =wn 10^-8*/
-
-		k_indirect = (wn * wn) / K;
-		k_indirect = k_indirect;	  /*kindirect = kindirect 10^-6*/
-		k_direct   = (2 * wn * zeta) / K;	/*kDirect = kDirect 10^-2*/
-		k_direct  *= 100;
-
-		k_direct_shift = Log2Int(k_direct) - Log2Int(10000) - 2;
-		k_btr1_rshft = (-1 * k_direct_shift) + config->btr_gain_shift_offset;
-		k_btr1 = k_direct / (1 << k_direct_shift);
-		k_btr1 /= 10000;
-
-		k_indirect_shift = Log2Int(k_indirect + 15) - 20 /*- 2*/;
-		k_btr0_rshft = (-1 * k_indirect_shift) + config->btr_gain_shift_offset;
-		k_btr0 = k_indirect * (1 << (-k_indirect_shift));
-		k_btr0 /= 1000000;
-
-		k_btr2_rshft = 0;
-		if (k_btr0_rshft > 15) {
-			k_btr2_rshft = k_btr0_rshft - 15;
-			k_btr0_rshft = 15;
-		}
-		reg = STB0899_READ_S2REG(STB0899_S2DEMOD, BTR_LOOP_GAIN);
-		STB0899_SETFIELD_VAL(KBTR0_RSHFT, reg, k_btr0_rshft);
-		STB0899_SETFIELD_VAL(KBTR0, reg, k_btr0);
-		STB0899_SETFIELD_VAL(KBTR1_RSHFT, reg, k_btr1_rshft);
-		STB0899_SETFIELD_VAL(KBTR1, reg, k_btr1);
-		STB0899_SETFIELD_VAL(KBTR2_RSHFT, reg, k_btr2_rshft);
-		stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_BTR_LOOP_GAIN, STB0899_OFF0_BTR_LOOP_GAIN, reg);
-	} else
-		stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_BTR_LOOP_GAIN, STB0899_OFF0_BTR_LOOP_GAIN, 0xc4c4f);
-}
-
-/*
- * stb0899_dvbs2_set_carr_freq
- * set nominal frequency for carrier search
- */
-static void stb0899_dvbs2_set_carr_freq(struct stb0899_state *state, s32 carr_freq, u32 master_clk)
-{
-	struct stb0899_config *config = state->config;
-	s32 crl_nom_freq;
-	u32 reg;
-
-	crl_nom_freq = (1 << config->crl_nco_bits) / master_clk;
-	crl_nom_freq *= carr_freq;
-	reg = STB0899_READ_S2REG(STB0899_S2DEMOD, CRL_NOM_FREQ);
-	STB0899_SETFIELD_VAL(CRL_NOM_FREQ, reg, crl_nom_freq);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CRL_NOM_FREQ, STB0899_OFF0_CRL_NOM_FREQ, reg);
-}
-
-/*
- * stb0899_dvbs2_init_calc
- * Initialize DVBS2 UWP, CSM, carrier and timing loops
- */
-static void stb0899_dvbs2_init_calc(struct stb0899_state *state)
-{
-	struct stb0899_internal *internal = &state->internal;
-	s32 steps, step_size;
-	u32 range, reg;
-
-	/* config uwp and csm */
-	stb0899_dvbs2_config_uwp(state);
-	stb0899_dvbs2_config_csm_auto(state);
-
-	/* initialize BTR	*/
-	stb0899_dvbs2_set_srate(state);
-	stb0899_dvbs2_set_btr_loopbw(state);
-
-	if (internal->srate / 1000000 >= 15)
-		step_size = (1 << 17) / 5;
-	else if (internal->srate / 1000000 >= 10)
-		step_size = (1 << 17) / 7;
-	else if (internal->srate / 1000000 >= 5)
-		step_size = (1 << 17) / 10;
-	else
-		step_size = (1 << 17) / 4;
-
-	range = internal->srch_range / 1000000;
-	steps = (10 * range * (1 << 17)) / (step_size * (internal->srate / 1000000));
-	steps = (steps + 6) / 10;
-	steps = (steps == 0) ? 1 : steps;
-	if (steps % 2 == 0)
-		stb0899_dvbs2_set_carr_freq(state, internal->center_freq -
-					   (internal->step_size * (internal->srate / 20000000)),
-					   (internal->master_clk) / 1000000);
-	else
-		stb0899_dvbs2_set_carr_freq(state, internal->center_freq, (internal->master_clk) / 1000000);
-
-	/*Set Carrier Search params (zigzag, num steps and freq step size*/
-	reg = STB0899_READ_S2REG(STB0899_S2DEMOD, ACQ_CNTRL2);
-	STB0899_SETFIELD_VAL(ZIGZAG, reg, 1);
-	STB0899_SETFIELD_VAL(NUM_STEPS, reg, steps);
-	STB0899_SETFIELD_VAL(FREQ_STEPSIZE, reg, step_size);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_ACQ_CNTRL2, STB0899_OFF0_ACQ_CNTRL2, reg);
-}
-
-/*
- * stb0899_dvbs2_btr_init
- * initialize the timing loop
- */
-static void stb0899_dvbs2_btr_init(struct stb0899_state *state)
-{
-	u32 reg;
-
-	/* set enable BTR loopback	*/
-	reg = STB0899_READ_S2REG(STB0899_S2DEMOD, BTR_CNTRL);
-	STB0899_SETFIELD_VAL(INTRP_PHS_SENSE, reg, 1);
-	STB0899_SETFIELD_VAL(BTR_ERR_ENA, reg, 1);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_BTR_CNTRL, STB0899_OFF0_BTR_CNTRL, reg);
-
-	/* fix btr freq accum at 0	*/
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_BTR_FREQ_INIT, STB0899_OFF0_BTR_FREQ_INIT, 0x10000000);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_BTR_FREQ_INIT, STB0899_OFF0_BTR_FREQ_INIT, 0x00000000);
-
-	/* fix btr freq accum at 0	*/
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_BTR_PHS_INIT, STB0899_OFF0_BTR_PHS_INIT, 0x10000000);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_BTR_PHS_INIT, STB0899_OFF0_BTR_PHS_INIT, 0x00000000);
-}
-
-/*
- * stb0899_dvbs2_reacquire
- * trigger a DVB-S2 acquisition
- */
-static void stb0899_dvbs2_reacquire(struct stb0899_state *state)
-{
-	u32 reg = 0;
-
-	/* demod soft reset	*/
-	STB0899_SETFIELD_VAL(DVBS2_RESET, reg, 1);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_RESET_CNTRL, STB0899_OFF0_RESET_CNTRL, reg);
-
-	/*Reset Timing Loop	*/
-	stb0899_dvbs2_btr_init(state);
-
-	/* reset Carrier loop	*/
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CRL_FREQ_INIT, STB0899_OFF0_CRL_FREQ_INIT, (1 << 30));
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CRL_FREQ_INIT, STB0899_OFF0_CRL_FREQ_INIT, 0);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CRL_LOOP_GAIN, STB0899_OFF0_CRL_LOOP_GAIN, 0);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CRL_PHS_INIT, STB0899_OFF0_CRL_PHS_INIT, (1 << 30));
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CRL_PHS_INIT, STB0899_OFF0_CRL_PHS_INIT, 0);
-
-	/*release demod soft reset	*/
-	reg = 0;
-	STB0899_SETFIELD_VAL(DVBS2_RESET, reg, 0);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_RESET_CNTRL, STB0899_OFF0_RESET_CNTRL, reg);
-
-	/* start acquisition process	*/
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_ACQUIRE_TRIG, STB0899_OFF0_ACQUIRE_TRIG, 1);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_LOCK_LOST, STB0899_OFF0_LOCK_LOST, 0);
-
-	/* equalizer Init	*/
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_EQUALIZER_INIT, STB0899_OFF0_EQUALIZER_INIT, 1);
-
-	/*Start equilizer	*/
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_EQUALIZER_INIT, STB0899_OFF0_EQUALIZER_INIT, 0);
-
-	reg = STB0899_READ_S2REG(STB0899_S2DEMOD, EQ_CNTRL);
-	STB0899_SETFIELD_VAL(EQ_SHIFT, reg, 0);
-	STB0899_SETFIELD_VAL(EQ_DISABLE_UPDATE, reg, 0);
-	STB0899_SETFIELD_VAL(EQ_DELAY, reg, 0x05);
-	STB0899_SETFIELD_VAL(EQ_ADAPT_MODE, reg, 0x01);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_EQ_CNTRL, STB0899_OFF0_EQ_CNTRL, reg);
-
-	/* RESET Packet delineator	*/
-	stb0899_write_reg(state, STB0899_PDELCTRL, 0x4a);
-}
-
-/*
- * stb0899_dvbs2_get_dmd_status
- * get DVB-S2 Demod LOCK status
- */
-static enum stb0899_status stb0899_dvbs2_get_dmd_status(struct stb0899_state *state, int timeout)
-{
-	int time = -10, lock = 0, uwp, csm;
-	u32 reg;
-
-	do {
-		reg = STB0899_READ_S2REG(STB0899_S2DEMOD, DMD_STATUS);
-		dprintk(state->verbose, FE_DEBUG, 1, "DMD_STATUS=[0x%02x]", reg);
-		if (STB0899_GETFIELD(IF_AGC_LOCK, reg))
-			dprintk(state->verbose, FE_DEBUG, 1, "------------->IF AGC LOCKED !");
-		reg = STB0899_READ_S2REG(STB0899_S2DEMOD, DMD_STAT2);
-		dprintk(state->verbose, FE_DEBUG, 1, "----------->DMD STAT2=[0x%02x]", reg);
-		uwp = STB0899_GETFIELD(UWP_LOCK, reg);
-		csm = STB0899_GETFIELD(CSM_LOCK, reg);
-		if (uwp && csm)
-			lock = 1;
-
-		time += 10;
-		msleep(10);
-
-	} while ((!lock) && (time <= timeout));
-
-	if (lock) {
-		dprintk(state->verbose, FE_DEBUG, 1, "----------------> DVB-S2 LOCK !");
-		return DVBS2_DEMOD_LOCK;
-	} else {
-		return DVBS2_DEMOD_NOLOCK;
-	}
-}
-
-/*
- * stb0899_dvbs2_get_data_lock
- * get FEC status
- */
-static int stb0899_dvbs2_get_data_lock(struct stb0899_state *state, int timeout)
-{
-	int time = 0, lock = 0;
-	u8 reg;
-
-	while ((!lock) && (time < timeout)) {
-		reg = stb0899_read_reg(state, STB0899_CFGPDELSTATUS1);
-		dprintk(state->verbose, FE_DEBUG, 1, "---------> CFGPDELSTATUS=[0x%02x]", reg);
-		lock = STB0899_GETFIELD(CFGPDELSTATUS_LOCK, reg);
-		time++;
-	}
-
-	return lock;
-}
-
-/*
- * stb0899_dvbs2_get_fec_status
- * get DVB-S2 FEC LOCK status
- */
-static enum stb0899_status stb0899_dvbs2_get_fec_status(struct stb0899_state *state, int timeout)
-{
-	int time = 0, Locked;
-
-	do {
-		Locked = stb0899_dvbs2_get_data_lock(state, 1);
-		time++;
-		msleep(1);
-
-	} while ((!Locked) && (time < timeout));
-
-	if (Locked) {
-		dprintk(state->verbose, FE_DEBUG, 1, "---------->DVB-S2 FEC LOCK !");
-		return DVBS2_FEC_LOCK;
-	} else {
-		return DVBS2_FEC_NOLOCK;
-	}
-}
-
-
-/*
- * stb0899_dvbs2_init_csm
- * set parameters for manual mode
- */
-static void stb0899_dvbs2_init_csm(struct stb0899_state *state, int pilots, enum stb0899_modcod modcod)
-{
-	struct stb0899_internal *internal = &state->internal;
-
-	s32 dvt_tbl = 1, two_pass = 0, agc_gain = 6, agc_shift = 0, loop_shift = 0, phs_diff_thr = 0x80;
-	s32 gamma_acq, gamma_rho_acq, gamma_trk, gamma_rho_trk, lock_count_thr;
-	u32 csm1, csm2, csm3, csm4;
-
-	if (((internal->master_clk / internal->srate) <= 4) && (modcod <= 11) && (pilots == 1)) {
-		switch (modcod) {
-		case STB0899_QPSK_12:
-			gamma_acq		= 25;
-			gamma_rho_acq		= 2700;
-			gamma_trk		= 12;
-			gamma_rho_trk		= 180;
-			lock_count_thr		= 8;
-			break;
-		case STB0899_QPSK_35:
-			gamma_acq		= 38;
-			gamma_rho_acq		= 7182;
-			gamma_trk		= 14;
-			gamma_rho_trk		= 308;
-			lock_count_thr		= 8;
-			break;
-		case STB0899_QPSK_23:
-			gamma_acq		= 42;
-			gamma_rho_acq		= 9408;
-			gamma_trk		= 17;
-			gamma_rho_trk		= 476;
-			lock_count_thr		= 8;
-			break;
-		case STB0899_QPSK_34:
-			gamma_acq		= 53;
-			gamma_rho_acq		= 16642;
-			gamma_trk		= 19;
-			gamma_rho_trk		= 646;
-			lock_count_thr		= 8;
-			break;
-		case STB0899_QPSK_45:
-			gamma_acq		= 53;
-			gamma_rho_acq		= 17119;
-			gamma_trk		= 22;
-			gamma_rho_trk		= 880;
-			lock_count_thr		= 8;
-			break;
-		case STB0899_QPSK_56:
-			gamma_acq		= 55;
-			gamma_rho_acq		= 19250;
-			gamma_trk		= 23;
-			gamma_rho_trk		= 989;
-			lock_count_thr		= 8;
-			break;
-		case STB0899_QPSK_89:
-			gamma_acq		= 60;
-			gamma_rho_acq		= 24240;
-			gamma_trk		= 24;
-			gamma_rho_trk		= 1176;
-			lock_count_thr		= 8;
-			break;
-		case STB0899_QPSK_910:
-			gamma_acq		= 66;
-			gamma_rho_acq		= 29634;
-			gamma_trk		= 24;
-			gamma_rho_trk		= 1176;
-			lock_count_thr		= 8;
-			break;
-		default:
-			gamma_acq		= 66;
-			gamma_rho_acq		= 29634;
-			gamma_trk		= 24;
-			gamma_rho_trk		= 1176;
-			lock_count_thr		= 8;
-			break;
-		}
-
-		csm1 = STB0899_READ_S2REG(STB0899_S2DEMOD, CSM_CNTRL1);
-		STB0899_SETFIELD_VAL(CSM_AUTO_PARAM, csm1, 0);
-		stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CSM_CNTRL1, STB0899_OFF0_CSM_CNTRL1, csm1);
-
-		csm1 = STB0899_READ_S2REG(STB0899_S2DEMOD, CSM_CNTRL1);
-		csm2 = STB0899_READ_S2REG(STB0899_S2DEMOD, CSM_CNTRL2);
-		csm3 = STB0899_READ_S2REG(STB0899_S2DEMOD, CSM_CNTRL3);
-		csm4 = STB0899_READ_S2REG(STB0899_S2DEMOD, CSM_CNTRL4);
-
-		STB0899_SETFIELD_VAL(CSM_DVT_TABLE, csm1, dvt_tbl);
-		STB0899_SETFIELD_VAL(CSM_TWO_PASS, csm1, two_pass);
-		STB0899_SETFIELD_VAL(CSM_AGC_GAIN, csm1, agc_gain);
-		STB0899_SETFIELD_VAL(CSM_AGC_SHIFT, csm1, agc_shift);
-		STB0899_SETFIELD_VAL(FE_LOOP_SHIFT, csm1, loop_shift);
-		STB0899_SETFIELD_VAL(CSM_GAMMA_ACQ, csm2, gamma_acq);
-		STB0899_SETFIELD_VAL(CSM_GAMMA_RHOACQ, csm2, gamma_rho_acq);
-		STB0899_SETFIELD_VAL(CSM_GAMMA_TRACK, csm3, gamma_trk);
-		STB0899_SETFIELD_VAL(CSM_GAMMA_RHOTRACK, csm3, gamma_rho_trk);
-		STB0899_SETFIELD_VAL(CSM_LOCKCOUNT_THRESH, csm4, lock_count_thr);
-		STB0899_SETFIELD_VAL(CSM_PHASEDIFF_THRESH, csm4, phs_diff_thr);
-
-		stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CSM_CNTRL1, STB0899_OFF0_CSM_CNTRL1, csm1);
-		stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CSM_CNTRL2, STB0899_OFF0_CSM_CNTRL2, csm2);
-		stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CSM_CNTRL3, STB0899_OFF0_CSM_CNTRL3, csm3);
-		stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CSM_CNTRL4, STB0899_OFF0_CSM_CNTRL4, csm4);
-	}
-}
-
-/*
- * stb0899_dvbs2_get_srate
- * get DVB-S2 Symbol Rate
- */
-static u32 stb0899_dvbs2_get_srate(struct stb0899_state *state)
-{
-	struct stb0899_internal *internal = &state->internal;
-	struct stb0899_config *config = state->config;
-
-	u32 bTrNomFreq, srate, decimRate, intval1, intval2, reg;
-	int div1, div2, rem1, rem2;
-
-	div1 = config->btr_nco_bits / 2;
-	div2 = config->btr_nco_bits - div1 - 1;
-
-	bTrNomFreq = STB0899_READ_S2REG(STB0899_S2DEMOD, BTR_NOM_FREQ);
-
-	reg = STB0899_READ_S2REG(STB0899_S2DEMOD, DECIM_CNTRL);
-	decimRate = STB0899_GETFIELD(DECIM_RATE, reg);
-	decimRate = (1 << decimRate);
-
-	intval1 = internal->master_clk / (1 << div1);
-	intval2 = bTrNomFreq / (1 << div2);
-
-	rem1 = internal->master_clk % (1 << div1);
-	rem2 = bTrNomFreq % (1 << div2);
-	/* only for integer calculation	*/
-	srate = (intval1 * intval2) + ((intval1 * rem2) / (1 << div2)) + ((intval2 * rem1) / (1 << div1));
-	srate /= decimRate;	/*symbrate = (btrnomfreq_register_val*MasterClock)/2^(27+decim_rate_field) */
-
-	return	srate;
-}
-
-/*
- * stb0899_dvbs2_algo
- * Search for signal, timing, carrier and data for a given
- * frequency in a given range
- */
-enum stb0899_status stb0899_dvbs2_algo(struct stb0899_state *state)
-{
-	struct stb0899_internal *internal = &state->internal;
-	enum stb0899_modcod modcod;
-
-	s32 offsetfreq, searchTime, FecLockTime, pilots, iqSpectrum;
-	int i = 0;
-	u32 reg, csm1;
-
-	if (internal->srate <= 2000000) {
-		searchTime	= 5000;	/* 5000 ms max time to lock UWP and CSM, SYMB <= 2Mbs		*/
-		FecLockTime	= 350;	/* 350  ms max time to lock FEC, SYMB <= 2Mbs			*/
-	} else if (internal->srate <= 5000000) {
-		searchTime	= 2500;	/* 2500 ms max time to lock UWP and CSM, 2Mbs < SYMB <= 5Mbs	*/
-		FecLockTime	= 170;	/* 170  ms max time to lock FEC, 2Mbs< SYMB <= 5Mbs		*/
-	} else if (internal->srate <= 10000000) {
-		searchTime	= 1500;	/* 1500 ms max time to lock UWP and CSM, 5Mbs <SYMB <= 10Mbs	*/
-		FecLockTime	= 80;	/* 80  ms max time to lock FEC, 5Mbs< SYMB <= 10Mbs		*/
-	} else if (internal->srate <= 15000000) {
-		searchTime	= 500;	/* 500 ms max time to lock UWP and CSM, 10Mbs <SYMB <= 15Mbs	*/
-		FecLockTime	= 50;	/* 50  ms max time to lock FEC, 10Mbs< SYMB <= 15Mbs		*/
-	} else if (internal->srate <= 20000000) {
-		searchTime	= 300;	/* 300 ms max time to lock UWP and CSM, 15Mbs < SYMB <= 20Mbs	*/
-		FecLockTime	= 30;	/* 50  ms max time to lock FEC, 15Mbs< SYMB <= 20Mbs		*/
-	} else if (internal->srate <= 25000000) {
-		searchTime	= 250;	/* 250 ms max time to lock UWP and CSM, 20 Mbs < SYMB <= 25Mbs	*/
-		FecLockTime	= 25;	/* 25 ms max time to lock FEC, 20Mbs< SYMB <= 25Mbs		*/
-	} else {
-		searchTime	= 150;	/* 150 ms max time to lock UWP and CSM, SYMB > 25Mbs		*/
-		FecLockTime	= 20;	/* 20 ms max time to lock FEC, 20Mbs< SYMB <= 25Mbs		*/
-	}
-
-	/* Maintain Stream Merger in reset during acquisition	*/
-	reg = stb0899_read_reg(state, STB0899_TSTRES);
-	STB0899_SETFIELD_VAL(FRESRS, reg, 1);
-	stb0899_write_reg(state, STB0899_TSTRES, reg);
-
-	/* enable tuner I/O */
-	stb0899_i2c_gate_ctrl(&state->frontend, 1);
-
-	/* Move tuner to frequency	*/
-	if (state->config->tuner_set_frequency)
-		state->config->tuner_set_frequency(&state->frontend, internal->freq);
-	if (state->config->tuner_get_frequency)
-		state->config->tuner_get_frequency(&state->frontend, &internal->freq);
-
-	/* disable tuner I/O */
-	stb0899_i2c_gate_ctrl(&state->frontend, 0);
-
-	/* Set IF AGC to acquisition	*/
-	reg = STB0899_READ_S2REG(STB0899_S2DEMOD, IF_AGC_CNTRL);
-	STB0899_SETFIELD_VAL(IF_LOOP_GAIN, reg,  4);
-	STB0899_SETFIELD_VAL(IF_AGC_REF, reg, 32);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_IF_AGC_CNTRL, STB0899_OFF0_IF_AGC_CNTRL, reg);
-
-	reg = STB0899_READ_S2REG(STB0899_S2DEMOD, IF_AGC_CNTRL2);
-	STB0899_SETFIELD_VAL(IF_AGC_DUMP_PER, reg, 0);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_IF_AGC_CNTRL2, STB0899_OFF0_IF_AGC_CNTRL2, reg);
-
-	/* Initialisation	*/
-	stb0899_dvbs2_init_calc(state);
-
-	reg = STB0899_READ_S2REG(STB0899_S2DEMOD, DMD_CNTRL2);
-	switch (internal->inversion) {
-	case IQ_SWAP_OFF:
-		STB0899_SETFIELD_VAL(SPECTRUM_INVERT, reg, 0);
-		break;
-	case IQ_SWAP_ON:
-		STB0899_SETFIELD_VAL(SPECTRUM_INVERT, reg, 1);
-		break;
-	case IQ_SWAP_AUTO:	/* use last successful search first	*/
-		STB0899_SETFIELD_VAL(SPECTRUM_INVERT, reg, 1);
-		break;
-	}
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_DMD_CNTRL2, STB0899_OFF0_DMD_CNTRL2, reg);
-	stb0899_dvbs2_reacquire(state);
-
-	/* Wait for demod lock (UWP and CSM)	*/
-	internal->status = stb0899_dvbs2_get_dmd_status(state, searchTime);
-
-	if (internal->status == DVBS2_DEMOD_LOCK) {
-		dprintk(state->verbose, FE_DEBUG, 1, "------------> DVB-S2 DEMOD LOCK !");
-		i = 0;
-		/* Demod Locked, check FEC status	*/
-		internal->status = stb0899_dvbs2_get_fec_status(state, FecLockTime);
-
-		/*If false lock (UWP and CSM Locked but no FEC) try 3 time max*/
-		while ((internal->status != DVBS2_FEC_LOCK) && (i < 3)) {
-			/*	Read the frequency offset*/
-			offsetfreq = STB0899_READ_S2REG(STB0899_S2DEMOD, CRL_FREQ);
-
-			/* Set the Nominal frequency to the found frequency offset for the next reacquire*/
-			reg = STB0899_READ_S2REG(STB0899_S2DEMOD, CRL_NOM_FREQ);
-			STB0899_SETFIELD_VAL(CRL_NOM_FREQ, reg, offsetfreq);
-			stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CRL_NOM_FREQ, STB0899_OFF0_CRL_NOM_FREQ, reg);
-			stb0899_dvbs2_reacquire(state);
-			internal->status = stb0899_dvbs2_get_fec_status(state, searchTime);
-			i++;
-		}
-	}
-
-	if (internal->status != DVBS2_FEC_LOCK) {
-		if (internal->inversion == IQ_SWAP_AUTO) {
-			reg = STB0899_READ_S2REG(STB0899_S2DEMOD, DMD_CNTRL2);
-			iqSpectrum = STB0899_GETFIELD(SPECTRUM_INVERT, reg);
-			/* IQ Spectrum Inversion	*/
-			STB0899_SETFIELD_VAL(SPECTRUM_INVERT, reg, !iqSpectrum);
-			stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_DMD_CNTRL2, STB0899_OFF0_DMD_CNTRL2, reg);
-			/* start acquistion process	*/
-			stb0899_dvbs2_reacquire(state);
-
-			/* Wait for demod lock (UWP and CSM)	*/
-			internal->status = stb0899_dvbs2_get_dmd_status(state, searchTime);
-			if (internal->status == DVBS2_DEMOD_LOCK) {
-				i = 0;
-				/* Demod Locked, check FEC	*/
-				internal->status = stb0899_dvbs2_get_fec_status(state, FecLockTime);
-				/*try thrice for false locks, (UWP and CSM Locked but no FEC)	*/
-				while ((internal->status != DVBS2_FEC_LOCK) && (i < 3)) {
-					/*	Read the frequency offset*/
-					offsetfreq = STB0899_READ_S2REG(STB0899_S2DEMOD, CRL_FREQ);
-
-					/* Set the Nominal frequency to the found frequency offset for the next reacquire*/
-					reg = STB0899_READ_S2REG(STB0899_S2DEMOD, CRL_NOM_FREQ);
-					STB0899_SETFIELD_VAL(CRL_NOM_FREQ, reg, offsetfreq);
-					stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CRL_NOM_FREQ, STB0899_OFF0_CRL_NOM_FREQ, reg);
-
-					stb0899_dvbs2_reacquire(state);
-					internal->status = stb0899_dvbs2_get_fec_status(state, searchTime);
-					i++;
-				}
-			}
-/*
-			if (pParams->DVBS2State == FE_DVBS2_FEC_LOCKED)
-				pParams->IQLocked = !iqSpectrum;
-*/
-		}
-	}
-	if (internal->status == DVBS2_FEC_LOCK) {
-		dprintk(state->verbose, FE_DEBUG, 1, "----------------> DVB-S2 FEC Lock !");
-		reg = STB0899_READ_S2REG(STB0899_S2DEMOD, UWP_STAT2);
-		modcod = STB0899_GETFIELD(UWP_DECODE_MOD, reg) >> 2;
-		pilots = STB0899_GETFIELD(UWP_DECODE_MOD, reg) & 0x01;
-
-		if ((((10 * internal->master_clk) / (internal->srate / 10)) <= 410) &&
-		      (INRANGE(STB0899_QPSK_23, modcod, STB0899_QPSK_910)) &&
-		      (pilots == 1)) {
-
-			stb0899_dvbs2_init_csm(state, pilots, modcod);
-			/* Wait for UWP,CSM and data LOCK 20ms max	*/
-			internal->status = stb0899_dvbs2_get_fec_status(state, FecLockTime);
-
-			i = 0;
-			while ((internal->status != DVBS2_FEC_LOCK) && (i < 3)) {
-				csm1 = STB0899_READ_S2REG(STB0899_S2DEMOD, CSM_CNTRL1);
-				STB0899_SETFIELD_VAL(CSM_TWO_PASS, csm1, 1);
-				stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CSM_CNTRL1, STB0899_OFF0_CSM_CNTRL1, csm1);
-				csm1 = STB0899_READ_S2REG(STB0899_S2DEMOD, CSM_CNTRL1);
-				STB0899_SETFIELD_VAL(CSM_TWO_PASS, csm1, 0);
-				stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_CSM_CNTRL1, STB0899_OFF0_CSM_CNTRL1, csm1);
-
-				internal->status = stb0899_dvbs2_get_fec_status(state, FecLockTime);
-				i++;
-			}
-		}
-
-		if ((((10 * internal->master_clk) / (internal->srate / 10)) <= 410) &&
-		      (INRANGE(STB0899_QPSK_12, modcod, STB0899_QPSK_35)) &&
-		      (pilots == 1)) {
-
-			/* Equalizer Disable update	 */
-			reg = STB0899_READ_S2REG(STB0899_S2DEMOD, EQ_CNTRL);
-			STB0899_SETFIELD_VAL(EQ_DISABLE_UPDATE, reg, 1);
-			stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_EQ_CNTRL, STB0899_OFF0_EQ_CNTRL, reg);
-		}
-
-		/* slow down the Equalizer once locked	*/
-		reg = STB0899_READ_S2REG(STB0899_S2DEMOD, EQ_CNTRL);
-		STB0899_SETFIELD_VAL(EQ_SHIFT, reg, 0x02);
-		stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_EQ_CNTRL, STB0899_OFF0_EQ_CNTRL, reg);
-
-		/* Store signal parameters	*/
-		offsetfreq = STB0899_READ_S2REG(STB0899_S2DEMOD, CRL_FREQ);
-
-		offsetfreq = offsetfreq / ((1 << 30) / 1000);
-		offsetfreq *= (internal->master_clk / 1000000);
-		reg = STB0899_READ_S2REG(STB0899_S2DEMOD, DMD_CNTRL2);
-		if (STB0899_GETFIELD(SPECTRUM_INVERT, reg))
-			offsetfreq *= -1;
-
-		internal->freq = internal->freq - offsetfreq;
-		internal->srate = stb0899_dvbs2_get_srate(state);
-
-		reg = STB0899_READ_S2REG(STB0899_S2DEMOD, UWP_STAT2);
-		internal->modcod = STB0899_GETFIELD(UWP_DECODE_MOD, reg) >> 2;
-		internal->pilots = STB0899_GETFIELD(UWP_DECODE_MOD, reg) & 0x01;
-		internal->frame_length = (STB0899_GETFIELD(UWP_DECODE_MOD, reg) >> 1) & 0x01;
-
-		 /* Set IF AGC to tracking	*/
-		reg = STB0899_READ_S2REG(STB0899_S2DEMOD, IF_AGC_CNTRL);
-		STB0899_SETFIELD_VAL(IF_LOOP_GAIN, reg,  3);
-
-		/* if QPSK 1/2,QPSK 3/5 or QPSK 2/3 set IF AGC reference to 16 otherwise 32*/
-		if (INRANGE(STB0899_QPSK_12, internal->modcod, STB0899_QPSK_23))
-			STB0899_SETFIELD_VAL(IF_AGC_REF, reg, 16);
-
-		stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_IF_AGC_CNTRL, STB0899_OFF0_IF_AGC_CNTRL, reg);
-
-		reg = STB0899_READ_S2REG(STB0899_S2DEMOD, IF_AGC_CNTRL2);
-		STB0899_SETFIELD_VAL(IF_AGC_DUMP_PER, reg, 7);
-		stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_IF_AGC_CNTRL2, STB0899_OFF0_IF_AGC_CNTRL2, reg);
-	}
-
-	/* Release Stream Merger Reset		*/
-	reg = stb0899_read_reg(state, STB0899_TSTRES);
-	STB0899_SETFIELD_VAL(FRESRS, reg, 0);
-	stb0899_write_reg(state, STB0899_TSTRES, reg);
-
-	return internal->status;
-}
diff --git a/drivers/media/dvb/frontends/stb0899_cfg.h b/drivers/media/dvb/frontends/stb0899_cfg.h
deleted file mode 100644
index 0867906..0000000
--- a/drivers/media/dvb/frontends/stb0899_cfg.h
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
-	STB0899 Multistandard Frontend driver
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	Copyright (C) ST Microelectronics
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __STB0899_CFG_H
-#define __STB0899_CFG_H
-
-static const struct stb0899_s2_reg  stb0899_s2_init_2[] = {
-
-	{ STB0899_OFF0_DMD_STATUS	, STB0899_BASE_DMD_STATUS	, 0x00000103 },	/* DMDSTATUS	*/
-	{ STB0899_OFF0_CRL_FREQ		, STB0899_BASE_CRL_FREQ		, 0x3ed1da56 },	/* CRLFREQ	*/
-	{ STB0899_OFF0_BTR_FREQ		, STB0899_BASE_BTR_FREQ		, 0x00004000 },	/* BTRFREQ	*/
-	{ STB0899_OFF0_IF_AGC_GAIN	, STB0899_BASE_IF_AGC_GAIN	, 0x00002ade },	/* IFAGCGAIN	*/
-	{ STB0899_OFF0_BB_AGC_GAIN	, STB0899_BASE_BB_AGC_GAIN	, 0x000001bc },	/* BBAGCGAIN	*/
-	{ STB0899_OFF0_DC_OFFSET	, STB0899_BASE_DC_OFFSET	, 0x00000200 },	/* DCOFFSET	*/
-	{ STB0899_OFF0_DMD_CNTRL	, STB0899_BASE_DMD_CNTRL	, 0x0000000f },	/* DMDCNTRL	*/
-
-	{ STB0899_OFF0_IF_AGC_CNTRL	, STB0899_BASE_IF_AGC_CNTRL	, 0x03fb4a20 },	/* IFAGCCNTRL	*/
-	{ STB0899_OFF0_BB_AGC_CNTRL	, STB0899_BASE_BB_AGC_CNTRL	, 0x00200c97 },	/* BBAGCCNTRL	*/
-
-	{ STB0899_OFF0_CRL_CNTRL	, STB0899_BASE_CRL_CNTRL	, 0x00000016 },	/* CRLCNTRL	*/
-	{ STB0899_OFF0_CRL_PHS_INIT	, STB0899_BASE_CRL_PHS_INIT	, 0x00000000 },	/* CRLPHSINIT	*/
-	{ STB0899_OFF0_CRL_FREQ_INIT	, STB0899_BASE_CRL_FREQ_INIT	, 0x00000000 },	/* CRLFREQINIT	*/
-	{ STB0899_OFF0_CRL_LOOP_GAIN	, STB0899_BASE_CRL_LOOP_GAIN	, 0x00000000 },	/* CRLLOOPGAIN	*/
-	{ STB0899_OFF0_CRL_NOM_FREQ	, STB0899_BASE_CRL_NOM_FREQ	, 0x3ed097b6 },	/* CRLNOMFREQ	*/
-	{ STB0899_OFF0_CRL_SWP_RATE	, STB0899_BASE_CRL_SWP_RATE	, 0x00000000 },	/* CRLSWPRATE	*/
-	{ STB0899_OFF0_CRL_MAX_SWP	, STB0899_BASE_CRL_MAX_SWP	, 0x00000000 },	/* CRLMAXSWP	*/
-	{ STB0899_OFF0_CRL_LK_CNTRL	, STB0899_BASE_CRL_LK_CNTRL	, 0x0f6cdc01 },	/* CRLLKCNTRL	*/
-	{ STB0899_OFF0_DECIM_CNTRL	, STB0899_BASE_DECIM_CNTRL	, 0x00000000 },	/* DECIMCNTRL	*/
-	{ STB0899_OFF0_BTR_CNTRL	, STB0899_BASE_BTR_CNTRL	, 0x00003993 },	/* BTRCNTRL	*/
-	{ STB0899_OFF0_BTR_LOOP_GAIN	, STB0899_BASE_BTR_LOOP_GAIN	, 0x000d3c6f },	/* BTRLOOPGAIN	*/
-	{ STB0899_OFF0_BTR_PHS_INIT	, STB0899_BASE_BTR_PHS_INIT	, 0x00000000 },	/* BTRPHSINIT	*/
-	{ STB0899_OFF0_BTR_FREQ_INIT	, STB0899_BASE_BTR_FREQ_INIT	, 0x00000000 },	/* BTRFREQINIT	*/
-	{ STB0899_OFF0_BTR_NOM_FREQ	, STB0899_BASE_BTR_NOM_FREQ	, 0x0238e38e },	/* BTRNOMFREQ	*/
-	{ STB0899_OFF0_BTR_LK_CNTRL	, STB0899_BASE_BTR_LK_CNTRL	, 0x00000000 },	/* BTRLKCNTRL	*/
-	{ STB0899_OFF0_DECN_CNTRL	, STB0899_BASE_DECN_CNTRL	, 0x00000000 },	/* DECNCNTRL	*/
-	{ STB0899_OFF0_TP_CNTRL		, STB0899_BASE_TP_CNTRL		, 0x00000000 },	/* TPCNTRL	*/
-	{ STB0899_OFF0_TP_BUF_STATUS	, STB0899_BASE_TP_BUF_STATUS	, 0x00000000 },	/* TPBUFSTATUS	*/
-	{ STB0899_OFF0_DC_ESTIM		, STB0899_BASE_DC_ESTIM		, 0x00000000 },	/* DCESTIM	*/
-	{ STB0899_OFF0_FLL_CNTRL	, STB0899_BASE_FLL_CNTRL	, 0x00000000 },	/* FLLCNTRL	*/
-	{ STB0899_OFF0_FLL_FREQ_WD	, STB0899_BASE_FLL_FREQ_WD	, 0x40070000 },	/* FLLFREQWD	*/
-	{ STB0899_OFF0_ANTI_ALIAS_SEL	, STB0899_BASE_ANTI_ALIAS_SEL	, 0x00000001 },	/* ANTIALIASSEL */
-	{ STB0899_OFF0_RRC_ALPHA	, STB0899_BASE_RRC_ALPHA	, 0x00000002 },	/* RRCALPHA	*/
-	{ STB0899_OFF0_DC_ADAPT_LSHFT	, STB0899_BASE_DC_ADAPT_LSHFT	, 0x00000000 },	/* DCADAPTISHFT */
-	{ STB0899_OFF0_IMB_OFFSET	, STB0899_BASE_IMB_OFFSET	, 0x0000fe01 },	/* IMBOFFSET	*/
-	{ STB0899_OFF0_IMB_ESTIMATE	, STB0899_BASE_IMB_ESTIMATE	, 0x00000000 },	/* IMBESTIMATE	*/
-	{ STB0899_OFF0_IMB_CNTRL	, STB0899_BASE_IMB_CNTRL	, 0x00000001 },	/* IMBCNTRL	*/
-	{ STB0899_OFF0_IF_AGC_CNTRL2	, STB0899_BASE_IF_AGC_CNTRL2	, 0x00005007 },	/* IFAGCCNTRL2	*/
-	{ STB0899_OFF0_DMD_CNTRL2	, STB0899_BASE_DMD_CNTRL2	, 0x00000002 },	/* DMDCNTRL2	*/
-	{ STB0899_OFF0_TP_BUFFER	, STB0899_BASE_TP_BUFFER	, 0x00000000 },	/* TPBUFFER	*/
-	{ STB0899_OFF0_TP_BUFFER1	, STB0899_BASE_TP_BUFFER1	, 0x00000000 },	/* TPBUFFER1	*/
-	{ STB0899_OFF0_TP_BUFFER2	, STB0899_BASE_TP_BUFFER2	, 0x00000000 },	/* TPBUFFER2	*/
-	{ STB0899_OFF0_TP_BUFFER3	, STB0899_BASE_TP_BUFFER3	, 0x00000000 },	/* TPBUFFER3	*/
-	{ STB0899_OFF0_TP_BUFFER4	, STB0899_BASE_TP_BUFFER4	, 0x00000000 },	/* TPBUFFER4	*/
-	{ STB0899_OFF0_TP_BUFFER5	, STB0899_BASE_TP_BUFFER5	, 0x00000000 },	/* TPBUFFER5	*/
-	{ STB0899_OFF0_TP_BUFFER6	, STB0899_BASE_TP_BUFFER6	, 0x00000000 },	/* TPBUFFER6	*/
-	{ STB0899_OFF0_TP_BUFFER7	, STB0899_BASE_TP_BUFFER7	, 0x00000000 },	/* TPBUFFER7	*/
-	{ STB0899_OFF0_TP_BUFFER8	, STB0899_BASE_TP_BUFFER8	, 0x00000000 },	/* TPBUFFER8	*/
-	{ STB0899_OFF0_TP_BUFFER9	, STB0899_BASE_TP_BUFFER9	, 0x00000000 },	/* TPBUFFER9	*/
-	{ STB0899_OFF0_TP_BUFFER10	, STB0899_BASE_TP_BUFFER10	, 0x00000000 },	/* TPBUFFER10	*/
-	{ STB0899_OFF0_TP_BUFFER11	, STB0899_BASE_TP_BUFFER11	, 0x00000000 },	/* TPBUFFER11	*/
-	{ STB0899_OFF0_TP_BUFFER12	, STB0899_BASE_TP_BUFFER12	, 0x00000000 },	/* TPBUFFER12	*/
-	{ STB0899_OFF0_TP_BUFFER13	, STB0899_BASE_TP_BUFFER13	, 0x00000000 },	/* TPBUFFER13	*/
-	{ STB0899_OFF0_TP_BUFFER14	, STB0899_BASE_TP_BUFFER14	, 0x00000000 },	/* TPBUFFER14	*/
-	{ STB0899_OFF0_TP_BUFFER15	, STB0899_BASE_TP_BUFFER15	, 0x00000000 },	/* TPBUFFER15	*/
-	{ STB0899_OFF0_TP_BUFFER16	, STB0899_BASE_TP_BUFFER16	, 0x0000ff00 },	/* TPBUFFER16	*/
-	{ STB0899_OFF0_TP_BUFFER17	, STB0899_BASE_TP_BUFFER17	, 0x00000100 },	/* TPBUFFER17	*/
-	{ STB0899_OFF0_TP_BUFFER18	, STB0899_BASE_TP_BUFFER18	, 0x0000fe01 },	/* TPBUFFER18	*/
-	{ STB0899_OFF0_TP_BUFFER19	, STB0899_BASE_TP_BUFFER19	, 0x000004fe },	/* TPBUFFER19	*/
-	{ STB0899_OFF0_TP_BUFFER20	, STB0899_BASE_TP_BUFFER20	, 0x0000cfe7 },	/* TPBUFFER20	*/
-	{ STB0899_OFF0_TP_BUFFER21	, STB0899_BASE_TP_BUFFER21	, 0x0000bec6 },	/* TPBUFFER21	*/
-	{ STB0899_OFF0_TP_BUFFER22	, STB0899_BASE_TP_BUFFER22	, 0x0000c2bf },	/* TPBUFFER22	*/
-	{ STB0899_OFF0_TP_BUFFER23	, STB0899_BASE_TP_BUFFER23	, 0x0000c1c1 },	/* TPBUFFER23	*/
-	{ STB0899_OFF0_TP_BUFFER24	, STB0899_BASE_TP_BUFFER24	, 0x0000c1c1 },	/* TPBUFFER24	*/
-	{ STB0899_OFF0_TP_BUFFER25	, STB0899_BASE_TP_BUFFER25	, 0x0000c1c1 },	/* TPBUFFER25	*/
-	{ STB0899_OFF0_TP_BUFFER26	, STB0899_BASE_TP_BUFFER26	, 0x0000c1c1 },	/* TPBUFFER26	*/
-	{ STB0899_OFF0_TP_BUFFER27	, STB0899_BASE_TP_BUFFER27	, 0x0000c1c0 },	/* TPBUFFER27	*/
-	{ STB0899_OFF0_TP_BUFFER28	, STB0899_BASE_TP_BUFFER28	, 0x0000c0c0 },	/* TPBUFFER28	*/
-	{ STB0899_OFF0_TP_BUFFER29	, STB0899_BASE_TP_BUFFER29	, 0x0000c1c1 },	/* TPBUFFER29	*/
-	{ STB0899_OFF0_TP_BUFFER30	, STB0899_BASE_TP_BUFFER30	, 0x0000c1c1 },	/* TPBUFFER30	*/
-	{ STB0899_OFF0_TP_BUFFER31	, STB0899_BASE_TP_BUFFER31	, 0x0000c0c1 },	/* TPBUFFER31	*/
-	{ STB0899_OFF0_TP_BUFFER32	, STB0899_BASE_TP_BUFFER32	, 0x0000c0c1 },	/* TPBUFFER32	*/
-	{ STB0899_OFF0_TP_BUFFER33	, STB0899_BASE_TP_BUFFER33	, 0x0000c1c1 },	/* TPBUFFER33	*/
-	{ STB0899_OFF0_TP_BUFFER34	, STB0899_BASE_TP_BUFFER34	, 0x0000c1c1 },	/* TPBUFFER34	*/
-	{ STB0899_OFF0_TP_BUFFER35	, STB0899_BASE_TP_BUFFER35	, 0x0000c0c1 },	/* TPBUFFER35	*/
-	{ STB0899_OFF0_TP_BUFFER36	, STB0899_BASE_TP_BUFFER36	, 0x0000c1c1 },	/* TPBUFFER36	*/
-	{ STB0899_OFF0_TP_BUFFER37	, STB0899_BASE_TP_BUFFER37	, 0x0000c0c1 },	/* TPBUFFER37	*/
-	{ STB0899_OFF0_TP_BUFFER38	, STB0899_BASE_TP_BUFFER38	, 0x0000c1c1 },	/* TPBUFFER38	*/
-	{ STB0899_OFF0_TP_BUFFER39	, STB0899_BASE_TP_BUFFER39	, 0x0000c0c0 },	/* TPBUFFER39	*/
-	{ STB0899_OFF0_TP_BUFFER40	, STB0899_BASE_TP_BUFFER40	, 0x0000c1c0 },	/* TPBUFFER40	*/
-	{ STB0899_OFF0_TP_BUFFER41	, STB0899_BASE_TP_BUFFER41	, 0x0000c1c1 },	/* TPBUFFER41	*/
-	{ STB0899_OFF0_TP_BUFFER42	, STB0899_BASE_TP_BUFFER42	, 0x0000c0c0 },	/* TPBUFFER42	*/
-	{ STB0899_OFF0_TP_BUFFER43	, STB0899_BASE_TP_BUFFER43	, 0x0000c1c0 },	/* TPBUFFER43	*/
-	{ STB0899_OFF0_TP_BUFFER44	, STB0899_BASE_TP_BUFFER44	, 0x0000c0c1 },	/* TPBUFFER44	*/
-	{ STB0899_OFF0_TP_BUFFER45	, STB0899_BASE_TP_BUFFER45	, 0x0000c1be },	/* TPBUFFER45	*/
-	{ STB0899_OFF0_TP_BUFFER46	, STB0899_BASE_TP_BUFFER46	, 0x0000c1c9 },	/* TPBUFFER46	*/
-	{ STB0899_OFF0_TP_BUFFER47	, STB0899_BASE_TP_BUFFER47	, 0x0000c0da },	/* TPBUFFER47	*/
-	{ STB0899_OFF0_TP_BUFFER48	, STB0899_BASE_TP_BUFFER48	, 0x0000c0ba },	/* TPBUFFER48	*/
-	{ STB0899_OFF0_TP_BUFFER49	, STB0899_BASE_TP_BUFFER49	, 0x0000c1c4 },	/* TPBUFFER49	*/
-	{ STB0899_OFF0_TP_BUFFER50	, STB0899_BASE_TP_BUFFER50	, 0x0000c1bf },	/* TPBUFFER50	*/
-	{ STB0899_OFF0_TP_BUFFER51	, STB0899_BASE_TP_BUFFER51	, 0x0000c0c1 },	/* TPBUFFER51	*/
-	{ STB0899_OFF0_TP_BUFFER52	, STB0899_BASE_TP_BUFFER52	, 0x0000c1c0 },	/* TPBUFFER52	*/
-	{ STB0899_OFF0_TP_BUFFER53	, STB0899_BASE_TP_BUFFER53	, 0x0000c0c1 },	/* TPBUFFER53	*/
-	{ STB0899_OFF0_TP_BUFFER54	, STB0899_BASE_TP_BUFFER54	, 0x0000c1c1 },	/* TPBUFFER54	*/
-	{ STB0899_OFF0_TP_BUFFER55	, STB0899_BASE_TP_BUFFER55	, 0x0000c1c1 },	/* TPBUFFER55	*/
-	{ STB0899_OFF0_TP_BUFFER56	, STB0899_BASE_TP_BUFFER56	, 0x0000c1c1 },	/* TPBUFFER56	*/
-	{ STB0899_OFF0_TP_BUFFER57	, STB0899_BASE_TP_BUFFER57	, 0x0000c1c1 },	/* TPBUFFER57	*/
-	{ STB0899_OFF0_TP_BUFFER58	, STB0899_BASE_TP_BUFFER58	, 0x0000c1c1 },	/* TPBUFFER58	*/
-	{ STB0899_OFF0_TP_BUFFER59	, STB0899_BASE_TP_BUFFER59	, 0x0000c1c1 },	/* TPBUFFER59	*/
-	{ STB0899_OFF0_TP_BUFFER60	, STB0899_BASE_TP_BUFFER60	, 0x0000c1c1 },	/* TPBUFFER60	*/
-	{ STB0899_OFF0_TP_BUFFER61	, STB0899_BASE_TP_BUFFER61	, 0x0000c1c1 },	/* TPBUFFER61	*/
-	{ STB0899_OFF0_TP_BUFFER62	, STB0899_BASE_TP_BUFFER62	, 0x0000c1c1 },	/* TPBUFFER62	*/
-	{ STB0899_OFF0_TP_BUFFER63	, STB0899_BASE_TP_BUFFER63	, 0x0000c1c0 },	/* TPBUFFER63	*/
-	{ STB0899_OFF0_RESET_CNTRL	, STB0899_BASE_RESET_CNTRL	, 0x00000001 },	/* RESETCNTRL	*/
-	{ STB0899_OFF0_ACM_ENABLE	, STB0899_BASE_ACM_ENABLE	, 0x00005654 },	/* ACMENABLE	*/
-	{ STB0899_OFF0_DESCR_CNTRL	, STB0899_BASE_DESCR_CNTRL	, 0x00000000 },	/* DESCRCNTRL	*/
-	{ STB0899_OFF0_CSM_CNTRL1	, STB0899_BASE_CSM_CNTRL1	, 0x00020019 },	/* CSMCNTRL1	*/
-	{ STB0899_OFF0_CSM_CNTRL2	, STB0899_BASE_CSM_CNTRL2	, 0x004b3237 },	/* CSMCNTRL2	*/
-	{ STB0899_OFF0_CSM_CNTRL3	, STB0899_BASE_CSM_CNTRL3	, 0x0003dd17 },	/* CSMCNTRL3	*/
-	{ STB0899_OFF0_CSM_CNTRL4	, STB0899_BASE_CSM_CNTRL4	, 0x00008008 },	/* CSMCNTRL4	*/
-	{ STB0899_OFF0_UWP_CNTRL1	, STB0899_BASE_UWP_CNTRL1	, 0x002a3106 },	/* UWPCNTRL1	*/
-	{ STB0899_OFF0_UWP_CNTRL2	, STB0899_BASE_UWP_CNTRL2	, 0x0006140a },	/* UWPCNTRL2	*/
-	{ STB0899_OFF0_UWP_STAT1	, STB0899_BASE_UWP_STAT1	, 0x00008000 },	/* UWPSTAT1	*/
-	{ STB0899_OFF0_UWP_STAT2	, STB0899_BASE_UWP_STAT2	, 0x00000000 },	/* UWPSTAT2	*/
-	{ STB0899_OFF0_DMD_STAT2	, STB0899_BASE_DMD_STAT2	, 0x00000000 },	/* DMDSTAT2	*/
-	{ STB0899_OFF0_FREQ_ADJ_SCALE	, STB0899_BASE_FREQ_ADJ_SCALE	, 0x00000471 },	/* FREQADJSCALE */
-	{ STB0899_OFF0_UWP_CNTRL3	, STB0899_BASE_UWP_CNTRL3	, 0x017b0465 },	/* UWPCNTRL3	*/
-	{ STB0899_OFF0_SYM_CLK_SEL	, STB0899_BASE_SYM_CLK_SEL	, 0x00000002 },	/* SYMCLKSEL	*/
-	{ STB0899_OFF0_SOF_SRCH_TO	, STB0899_BASE_SOF_SRCH_TO	, 0x00196464 },	/* SOFSRCHTO	*/
-	{ STB0899_OFF0_ACQ_CNTRL1	, STB0899_BASE_ACQ_CNTRL1	, 0x00000603 },	/* ACQCNTRL1	*/
-	{ STB0899_OFF0_ACQ_CNTRL2	, STB0899_BASE_ACQ_CNTRL2	, 0x02046666 },	/* ACQCNTRL2	*/
-	{ STB0899_OFF0_ACQ_CNTRL3	, STB0899_BASE_ACQ_CNTRL3	, 0x10046583 },	/* ACQCNTRL3	*/
-	{ STB0899_OFF0_FE_SETTLE	, STB0899_BASE_FE_SETTLE	, 0x00010404 },	/* FESETTLE	*/
-	{ STB0899_OFF0_AC_DWELL		, STB0899_BASE_AC_DWELL		, 0x0002aa8a },	/* ACDWELL	*/
-	{ STB0899_OFF0_ACQUIRE_TRIG	, STB0899_BASE_ACQUIRE_TRIG	, 0x00000000 },	/* ACQUIRETRIG	*/
-	{ STB0899_OFF0_LOCK_LOST	, STB0899_BASE_LOCK_LOST	, 0x00000001 },	/* LOCKLOST	*/
-	{ STB0899_OFF0_ACQ_STAT1	, STB0899_BASE_ACQ_STAT1	, 0x00000500 },	/* ACQSTAT1	*/
-	{ STB0899_OFF0_ACQ_TIMEOUT	, STB0899_BASE_ACQ_TIMEOUT	, 0x0028a0a0 },	/* ACQTIMEOUT	*/
-	{ STB0899_OFF0_ACQ_TIME		, STB0899_BASE_ACQ_TIME		, 0x00000000 },	/* ACQTIME	*/
-	{ STB0899_OFF0_FINAL_AGC_CNTRL	, STB0899_BASE_FINAL_AGC_CNTRL	, 0x00800c17 },	/* FINALAGCCNTRL*/
-	{ STB0899_OFF0_FINAL_AGC_GAIN	, STB0899_BASE_FINAL_AGC_GAIN	, 0x00000000 },	/* FINALAGCCGAIN*/
-	{ STB0899_OFF0_EQUALIZER_INIT	, STB0899_BASE_EQUALIZER_INIT	, 0x00000000 },	/* EQUILIZERINIT*/
-	{ STB0899_OFF0_EQ_CNTRL		, STB0899_BASE_EQ_CNTRL		, 0x00054802 },	/* EQCNTL	*/
-	{ STB0899_OFF0_EQ_I_INIT_COEFF_0, STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000000 },	/* EQIINITCOEFF0 */
-	{ STB0899_OFF1_EQ_I_INIT_COEFF_1, STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000000 },	/* EQIINITCOEFF1 */
-	{ STB0899_OFF2_EQ_I_INIT_COEFF_2, STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000000 },	/* EQIINITCOEFF2 */
-	{ STB0899_OFF3_EQ_I_INIT_COEFF_3, STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000000 },	/* EQIINITCOEFF3 */
-	{ STB0899_OFF4_EQ_I_INIT_COEFF_4, STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000000 },	/* EQIINITCOEFF4 */
-	{ STB0899_OFF5_EQ_I_INIT_COEFF_5, STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000400 },	/* EQIINITCOEFF5 */
-	{ STB0899_OFF6_EQ_I_INIT_COEFF_6, STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000000 },	/* EQIINITCOEFF6 */
-	{ STB0899_OFF7_EQ_I_INIT_COEFF_7, STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000000 },	/* EQIINITCOEFF7 */
-	{ STB0899_OFF8_EQ_I_INIT_COEFF_8, STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000000 },	/* EQIINITCOEFF8 */
-	{ STB0899_OFF9_EQ_I_INIT_COEFF_9, STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000000 },	/* EQIINITCOEFF9 */
-	{ STB0899_OFFa_EQ_I_INIT_COEFF_10,STB0899_BASE_EQ_I_INIT_COEFF_N, 0x00000000 },	/* EQIINITCOEFF10*/
-	{ STB0899_OFF0_EQ_Q_INIT_COEFF_0, STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 },	/* EQQINITCOEFF0 */
-	{ STB0899_OFF1_EQ_Q_INIT_COEFF_1, STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 },	/* EQQINITCOEFF1 */
-	{ STB0899_OFF2_EQ_Q_INIT_COEFF_2, STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 },	/* EQQINITCOEFF2 */
-	{ STB0899_OFF3_EQ_Q_INIT_COEFF_3, STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 },	/* EQQINITCOEFF3 */
-	{ STB0899_OFF4_EQ_Q_INIT_COEFF_4, STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 },	/* EQQINITCOEFF4 */
-	{ STB0899_OFF5_EQ_Q_INIT_COEFF_5, STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 },	/* EQQINITCOEFF5 */
-	{ STB0899_OFF6_EQ_Q_INIT_COEFF_6, STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 },	/* EQQINITCOEFF6 */
-	{ STB0899_OFF7_EQ_Q_INIT_COEFF_7, STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 },	/* EQQINITCOEFF7 */
-	{ STB0899_OFF8_EQ_Q_INIT_COEFF_8, STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 },	/* EQQINITCOEFF8 */
-	{ STB0899_OFF9_EQ_Q_INIT_COEFF_9, STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 },	/* EQQINITCOEFF9 */
-	{ STB0899_OFFa_EQ_Q_INIT_COEFF_10,STB0899_BASE_EQ_Q_INIT_COEFF_N, 0x00000000 },	/* EQQINITCOEFF10*/
-	{ STB0899_OFF0_EQ_I_OUT_COEFF_0	, STB0899_BASE_EQ_I_OUT_COEFF_N	, 0x00000000 }, /* EQICOEFFSOUT0 */
-	{ STB0899_OFF1_EQ_I_OUT_COEFF_1	, STB0899_BASE_EQ_I_OUT_COEFF_N	, 0x00000000 }, /* EQICOEFFSOUT1 */
-	{ STB0899_OFF2_EQ_I_OUT_COEFF_2	, STB0899_BASE_EQ_I_OUT_COEFF_N	, 0x00000000 }, /* EQICOEFFSOUT2 */
-	{ STB0899_OFF3_EQ_I_OUT_COEFF_3	, STB0899_BASE_EQ_I_OUT_COEFF_N	, 0x00000000 }, /* EQICOEFFSOUT3 */
-	{ STB0899_OFF4_EQ_I_OUT_COEFF_4	, STB0899_BASE_EQ_I_OUT_COEFF_N	, 0x00000000 }, /* EQICOEFFSOUT4 */
-	{ STB0899_OFF5_EQ_I_OUT_COEFF_5	, STB0899_BASE_EQ_I_OUT_COEFF_N	, 0x00000000 }, /* EQICOEFFSOUT5 */
-	{ STB0899_OFF6_EQ_I_OUT_COEFF_6	, STB0899_BASE_EQ_I_OUT_COEFF_N	, 0x00000000 }, /* EQICOEFFSOUT6 */
-	{ STB0899_OFF7_EQ_I_OUT_COEFF_7	, STB0899_BASE_EQ_I_OUT_COEFF_N	, 0x00000000 }, /* EQICOEFFSOUT7 */
-	{ STB0899_OFF8_EQ_I_OUT_COEFF_8	, STB0899_BASE_EQ_I_OUT_COEFF_N	, 0x00000000 }, /* EQICOEFFSOUT8 */
-	{ STB0899_OFF9_EQ_I_OUT_COEFF_9	, STB0899_BASE_EQ_I_OUT_COEFF_N	, 0x00000000 }, /* EQICOEFFSOUT9 */
-	{ STB0899_OFFa_EQ_I_OUT_COEFF_10,STB0899_BASE_EQ_I_OUT_COEFF_N	, 0x00000000 }, /* EQICOEFFSOUT10*/
-	{ STB0899_OFF0_EQ_Q_OUT_COEFF_0	, STB0899_BASE_EQ_Q_OUT_COEFF_N	, 0x00000000 },	/* EQQCOEFFSOUT0 */
-	{ STB0899_OFF1_EQ_Q_OUT_COEFF_1	, STB0899_BASE_EQ_Q_OUT_COEFF_N	, 0x00000000 },	/* EQQCOEFFSOUT1 */
-	{ STB0899_OFF2_EQ_Q_OUT_COEFF_2	, STB0899_BASE_EQ_Q_OUT_COEFF_N	, 0x00000000 },	/* EQQCOEFFSOUT2 */
-	{ STB0899_OFF3_EQ_Q_OUT_COEFF_3	, STB0899_BASE_EQ_Q_OUT_COEFF_N	, 0x00000000 },	/* EQQCOEFFSOUT3 */
-	{ STB0899_OFF4_EQ_Q_OUT_COEFF_4	, STB0899_BASE_EQ_Q_OUT_COEFF_N	, 0x00000000 },	/* EQQCOEFFSOUT4 */
-	{ STB0899_OFF5_EQ_Q_OUT_COEFF_5	, STB0899_BASE_EQ_Q_OUT_COEFF_N	, 0x00000000 },	/* EQQCOEFFSOUT5 */
-	{ STB0899_OFF6_EQ_Q_OUT_COEFF_6 , STB0899_BASE_EQ_Q_OUT_COEFF_N	, 0x00000000 },	/* EQQCOEFFSOUT6 */
-	{ STB0899_OFF7_EQ_Q_OUT_COEFF_7	, STB0899_BASE_EQ_Q_OUT_COEFF_N	, 0x00000000 },	/* EQQCOEFFSOUT7 */
-	{ STB0899_OFF8_EQ_Q_OUT_COEFF_8	, STB0899_BASE_EQ_Q_OUT_COEFF_N	, 0x00000000 },	/* EQQCOEFFSOUT8 */
-	{ STB0899_OFF9_EQ_Q_OUT_COEFF_9	, STB0899_BASE_EQ_Q_OUT_COEFF_N	, 0x00000000 },	/* EQQCOEFFSOUT9 */
-	{ STB0899_OFFa_EQ_Q_OUT_COEFF_10, STB0899_BASE_EQ_Q_OUT_COEFF_N	, 0x00000000 },	/* EQQCOEFFSOUT10*/
-	{ 0xffff			, 0xffffffff			, 0xffffffff },
-};
-static const struct stb0899_s2_reg stb0899_s2_init_4[] = {
-	{ STB0899_OFF0_BLOCK_LNGTH	, STB0899_BASE_BLOCK_LNGTH	, 0x00000008 },	/* BLOCKLNGTH	*/
-	{ STB0899_OFF0_ROW_STR		, STB0899_BASE_ROW_STR		, 0x000000b4 },	/* ROWSTR	*/
-	{ STB0899_OFF0_BN_END_ADDR	, STB0899_BASE_BN_END_ADDR	, 0x000004b5 },	/* BNANDADDR	*/
-	{ STB0899_OFF0_CN_END_ADDR	, STB0899_BASE_CN_END_ADDR	, 0x00000b4b },	/* CNANDADDR	*/
-	{ STB0899_OFF0_INFO_LENGTH	, STB0899_BASE_INFO_LENGTH	, 0x00000078 },	/* INFOLENGTH	*/
-	{ STB0899_OFF0_BOT_ADDR		, STB0899_BASE_BOT_ADDR		, 0x000001e0 },	/* BOT_ADDR	*/
-	{ STB0899_OFF0_BCH_BLK_LN	, STB0899_BASE_BCH_BLK_LN	, 0x0000a8c0 },	/* BCHBLKLN	*/
-	{ STB0899_OFF0_BCH_T		, STB0899_BASE_BCH_T		, 0x0000000c },	/* BCHT		*/
-	{ STB0899_OFF0_CNFG_MODE	, STB0899_BASE_CNFG_MODE	, 0x00000001 },	/* CNFGMODE	*/
-	{ STB0899_OFF0_LDPC_STAT	, STB0899_BASE_LDPC_STAT	, 0x0000000d },	/* LDPCSTAT	*/
-	{ STB0899_OFF0_ITER_SCALE	, STB0899_BASE_ITER_SCALE	, 0x00000040 },	/* ITERSCALE	*/
-	{ STB0899_OFF0_INPUT_MODE	, STB0899_BASE_INPUT_MODE	, 0x00000000 },	/* INPUTMODE	*/
-	{ STB0899_OFF0_LDPCDECRST	, STB0899_BASE_LDPCDECRST	, 0x00000000 },	/* LDPCDECRST	*/
-	{ STB0899_OFF0_CLK_PER_BYTE_RW	, STB0899_BASE_CLK_PER_BYTE_RW	, 0x00000008 },	/* CLKPERBYTE	*/
-	{ STB0899_OFF0_BCH_ERRORS	, STB0899_BASE_BCH_ERRORS	, 0x00000000 },	/* BCHERRORS	*/
-	{ STB0899_OFF0_LDPC_ERRORS	, STB0899_BASE_LDPC_ERRORS	, 0x00000000 },	/* LDPCERRORS	*/
-	{ STB0899_OFF0_BCH_MODE		, STB0899_BASE_BCH_MODE		, 0x00000000 },	/* BCHMODE	*/
-	{ STB0899_OFF0_ERR_ACC_PER	, STB0899_BASE_ERR_ACC_PER	, 0x00000008 },	/* ERRACCPER	*/
-	{ STB0899_OFF0_BCH_ERR_ACC	, STB0899_BASE_BCH_ERR_ACC	, 0x00000000 },	/* BCHERRACC	*/
-	{ STB0899_OFF0_FEC_TP_SEL	, STB0899_BASE_FEC_TP_SEL	, 0x00000000 },	/* FECTPSEL	*/
-	{ 0xffff			, 0xffffffff			, 0xffffffff },
-};
-
-static const struct stb0899_s1_reg stb0899_s1_init_5[] = {
-	{ STB0899_TSTCK		, 0x00 },
-	{ STB0899_TSTRES	, 0x00 },
-	{ STB0899_TSTOUT	, 0x00 },
-	{ STB0899_TSTIN		, 0x00 },
-	{ STB0899_TSTSYS	, 0x00 },
-	{ STB0899_TSTCHIP	, 0x00 },
-	{ STB0899_TSTFREE	, 0x00 },
-	{ STB0899_TSTI2C	, 0x00 },
-	{ STB0899_BITSPEEDM	, 0x00 },
-	{ STB0899_BITSPEEDL	, 0x00 },
-	{ STB0899_TBUSBIT	, 0x00 },
-	{ STB0899_TSTDIS	, 0x00 },
-	{ STB0899_TSTDISRX	, 0x00 },
-	{ STB0899_TSTJETON	, 0x00 },
-	{ STB0899_TSTDCADJ	, 0x00 },
-	{ STB0899_TSTAGC1	, 0x00 },
-	{ STB0899_TSTAGC1N	, 0x00 },
-	{ STB0899_TSTPOLYPH	, 0x00 },
-	{ STB0899_TSTR		, 0x00 },
-	{ STB0899_TSTAGC2	, 0x00 },
-	{ STB0899_TSTCTL1	, 0x00 },
-	{ STB0899_TSTCTL2	, 0x00 },
-	{ STB0899_TSTCTL3	, 0x00 },
-	{ STB0899_TSTDEMAP	, 0x00 },
-	{ STB0899_TSTDEMAP2	, 0x00 },
-	{ STB0899_TSTDEMMON	, 0x00 },
-	{ STB0899_TSTRATE	, 0x00 },
-	{ STB0899_TSTSELOUT	, 0x00 },
-	{ STB0899_TSYNC		, 0x00 },
-	{ STB0899_TSTERR	, 0x00 },
-	{ STB0899_TSTRAM1	, 0x00 },
-	{ STB0899_TSTVSELOUT	, 0x00 },
-	{ STB0899_TSTFORCEIN	, 0x00 },
-	{ STB0899_TSTRS1	, 0x00 },
-	{ STB0899_TSTRS2	, 0x00 },
-	{ STB0899_TSTRS3	, 0x00 },
-	{ STB0899_GHOSTREG	, 0x81 },
-	{ 0xffff		, 0xff },
-};
-
-#define STB0899_DVBS2_ESNO_AVE			3
-#define STB0899_DVBS2_ESNO_QUANT		32
-#define STB0899_DVBS2_AVFRAMES_COARSE		10
-#define STB0899_DVBS2_AVFRAMES_FINE		20
-#define STB0899_DVBS2_MISS_THRESHOLD		6
-#define STB0899_DVBS2_UWP_THRESHOLD_ACQ		1125
-#define STB0899_DVBS2_UWP_THRESHOLD_TRACK	758
-#define STB0899_DVBS2_UWP_THRESHOLD_SOF		1350
-#define STB0899_DVBS2_SOF_SEARCH_TIMEOUT	1664100
-
-#define STB0899_DVBS2_BTR_NCO_BITS		28
-#define STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET	15
-#define STB0899_DVBS2_CRL_NCO_BITS		30
-#define STB0899_DVBS2_LDPC_MAX_ITER		70
-
-#endif //__STB0899_CFG_H
diff --git a/drivers/media/dvb/frontends/stb0899_drv.c b/drivers/media/dvb/frontends/stb0899_drv.c
deleted file mode 100644
index 5d7f8a9..0000000
--- a/drivers/media/dvb/frontends/stb0899_drv.c
+++ /dev/null
@@ -1,1651 +0,0 @@
-/*
-	STB0899 Multistandard Frontend driver
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	Copyright (C) ST Microelectronics
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-
-#include <linux/dvb/frontend.h>
-#include "dvb_frontend.h"
-
-#include "stb0899_drv.h"
-#include "stb0899_priv.h"
-#include "stb0899_reg.h"
-
-static unsigned int verbose = 0;//1;
-module_param(verbose, int, 0644);
-
-/* C/N in dB/10, NIRM/NIRL */
-static const struct stb0899_tab stb0899_cn_tab[] = {
-	{ 200,	2600 },
-	{ 190,	2700 },
-	{ 180,	2860 },
-	{ 170,	3020 },
-	{ 160,	3210 },
-	{ 150,	3440 },
-	{ 140,	3710 },
-	{ 130,	4010 },
-	{ 120,	4360 },
-	{ 110,	4740 },
-	{ 100,	5190 },
-	{ 90,	5670 },
-	{ 80,	6200 },
-	{ 70,	6770 },
-	{ 60,	7360 },
-	{ 50,	7970 },
-	{ 40,	8250 },
-	{ 30,	9000 },
-	{ 20,	9450 },
-	{ 15,	9600 },
-};
-
-/* DVB-S AGCIQ_VALUE vs. signal level in dBm/10.
- * As measured, connected to a modulator.
- * -8.0 to -50.0 dBm directly connected,
- * -52.0 to -74.8 with extra attenuation.
- * Cut-off to AGCIQ_VALUE = 0x80 below -74.8dBm.
- * Crude linear extrapolation below -84.8dBm and above -8.0dBm.
- */
-static const struct stb0899_tab stb0899_dvbsrf_tab[] = {
-	{ -750,	-128 },
-	{ -748,	 -94 },
-	{ -745,	 -92 },
-	{ -735,	 -90 },
-	{ -720,	 -87 },
-	{ -670,	 -77 },
-	{ -640,	 -70 },
-	{ -610,	 -62 },
-	{ -600,	 -60 },
-	{ -590,	 -56 },
-	{ -560,	 -41 },
-	{ -540,	 -25 },
-	{ -530,	 -17 },
-	{ -520,	 -11 },
-	{ -500,	   1 },
-	{ -490,	   6 },
-	{ -480,	  10 },
-	{ -440,	  22 },
-	{ -420,	  27 },
-	{ -400,	  31 },
-	{ -380,	  34 },
-	{ -340,	  40 },
-	{ -320,	  43 },
-	{ -280,	  48 },
-	{ -250,	  52 },
-	{ -230,	  55 },
-	{ -180,	  61 },
-	{ -140,	  66 },
-	{  -90,	  73 },
-	{  -80,	  74 },
-	{  500,	 127 }
-};
-
-/* DVB-S2 IF_AGC_GAIN vs. signal level in dBm/10.
- * As measured, connected to a modulator.
- * -8.0 to -50.1 dBm directly connected,
- * -53.0 to -76.6 with extra attenuation.
- * Cut-off to IF_AGC_GAIN = 0x3fff below -76.6dBm.
- * Crude linear extrapolation below -76.6dBm and above -8.0dBm.
- */
-static const struct stb0899_tab stb0899_dvbs2rf_tab[] = {
-	{  700,	    0 },
-	{  -80,	 3217 },
-	{ -150,	 3893 },
-	{ -190,	 4217 },
-	{ -240,	 4621 },
-	{ -280,	 4945 },
-	{ -320,	 5273 },
-	{ -350,	 5545 },
-	{ -370,	 5741 },
-	{ -410,	 6147 },
-	{ -450,	 6671 },
-	{ -490,	 7413 },
-	{ -501,	 7665 },
-	{ -530,	 8767 },
-	{ -560,	10219 },
-	{ -580,	10939 },
-	{ -590,	11518 },
-	{ -600,	11723 },
-	{ -650,	12659 },
-	{ -690,	13219 },
-	{ -730,	13645 },
-	{ -750,	13909 },
-	{ -766,	14153 },
-	{ -950,	16383 }
-};
-
-/* DVB-S2 Es/N0 quant in dB/100 vs read value * 100*/
-static struct stb0899_tab stb0899_quant_tab[] = {
-	{    0,	    0 },
-	{    0,	  100 },
-	{  600,	  200 },
-	{  950,	  299 },
-	{ 1200,	  398 },
-	{ 1400,	  501 },
-	{ 1560,	  603 },
-	{ 1690,	  700 },
-	{ 1810,	  804 },
-	{ 1910,	  902 },
-	{ 2000,	 1000 },
-	{ 2080,	 1096 },
-	{ 2160,	 1202 },
-	{ 2230,	 1303 },
-	{ 2350,	 1496 },
-	{ 2410,	 1603 },
-	{ 2460,	 1698 },
-	{ 2510,	 1799 },
-	{ 2600,	 1995 },
-	{ 2650,	 2113 },
-	{ 2690,  2213 },
-	{ 2720,	 2291 },
-	{ 2760,	 2399 },
-	{ 2800,	 2512 },
-	{ 2860,	 2692 },
-	{ 2930,	 2917 },
-	{ 2960,	 3020 },
-	{ 3010,	 3199 },
-	{ 3040,	 3311 },
-	{ 3060,	 3388 },
-	{ 3120,	 3631 },
-	{ 3190,	 3936 },
-	{ 3400,	 5012 },
-	{ 3610,	 6383 },
-	{ 3800,	 7943 },
-	{ 4210,	12735 },
-	{ 4500,	17783 },
-	{ 4690,	22131 },
-	{ 4810,	25410 }
-};
-
-/* DVB-S2 Es/N0 estimate in dB/100 vs read value */
-static struct stb0899_tab stb0899_est_tab[] = {
-	{    0,	     0 },
-	{    0,	     1 },
-	{  301,	     2 },
-	{ 1204,	    16 },
-	{ 1806,	    64 },
-	{ 2408,	   256 },
-	{ 2709,	   512 },
-	{ 3010,	  1023 },
-	{ 3311,	  2046 },
-	{ 3612,	  4093 },
-	{ 3823,	  6653 },
-	{ 3913,	  8185 },
-	{ 4010,	 10233 },
-	{ 4107,	 12794 },
-	{ 4214,	 16368 },
-	{ 4266,	 18450 },
-	{ 4311,	 20464 },
-	{ 4353,	 22542 },
-	{ 4391,	 24604 },
-	{ 4425,	 26607 },
-	{ 4457,	 28642 },
-	{ 4487,	 30690 },
-	{ 4515,	 32734 },
-	{ 4612,	 40926 },
-	{ 4692,	 49204 },
-	{ 4816,	 65464 },
-	{ 4913,	 81846 },
-	{ 4993,	 98401 },
-	{ 5060,	114815 },
-	{ 5118,	131220 },
-	{ 5200,	158489 },
-	{ 5300,	199526 },
-	{ 5400,	251189 },
-	{ 5500,	316228 },
-	{ 5600,	398107 },
-	{ 5720,	524807 },
-	{ 5721,	526017 },
-};
-
-static int _stb0899_read_reg(struct stb0899_state *state, unsigned int reg)
-{
-	int ret;
-
-	u8 b0[] = { reg >> 8, reg & 0xff };
-	u8 buf;
-
-	struct i2c_msg msg[] = {
-		{
-			.addr	= state->config->demod_address,
-			.flags	= 0,
-			.buf	= b0,
-			.len	= 2
-		},{
-			.addr	= state->config->demod_address,
-			.flags	= I2C_M_RD,
-			.buf	= &buf,
-			.len	= 1
-		}
-	};
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-	if (ret != 2) {
-		if (ret != -ERESTARTSYS)
-			dprintk(state->verbose, FE_ERROR, 1,
-				"Read error, Reg=[0x%02x], Status=%d",
-				reg, ret);
-
-		return ret < 0 ? ret : -EREMOTEIO;
-	}
-	if (unlikely(*state->verbose >= FE_DEBUGREG))
-		dprintk(state->verbose, FE_ERROR, 1, "Reg=[0x%02x], data=%02x",
-			reg, buf);
-
-	return (unsigned int)buf;
-}
-
-int stb0899_read_reg(struct stb0899_state *state, unsigned int reg)
-{
-	int result;
-
-	result = _stb0899_read_reg(state, reg);
-	/*
-	 * Bug ID 9:
-	 * access to 0xf2xx/0xf6xx
-	 * must be followed by read from 0xf2ff/0xf6ff.
-	 */
-	if ((reg != 0xf2ff) && (reg != 0xf6ff) &&
-	    (((reg & 0xff00) == 0xf200) || ((reg & 0xff00) == 0xf600)))
-		_stb0899_read_reg(state, (reg | 0x00ff));
-
-	return result;
-}
-
-u32 _stb0899_read_s2reg(struct stb0899_state *state,
-			u32 stb0899_i2cdev,
-			u32 stb0899_base_addr,
-			u16 stb0899_reg_offset)
-{
-	int status;
-	u32 data;
-	u8 buf[7] = { 0 };
-	u16 tmpaddr;
-
-	u8 buf_0[] = {
-		GETBYTE(stb0899_i2cdev, BYTE1),		/* 0xf3	S2 Base Address (MSB)	*/
-		GETBYTE(stb0899_i2cdev, BYTE0),		/* 0xfc	S2 Base Address (LSB)	*/
-		GETBYTE(stb0899_base_addr, BYTE0),	/* 0x00	Base Address (LSB)	*/
-		GETBYTE(stb0899_base_addr, BYTE1),	/* 0x04	Base Address (LSB)	*/
-		GETBYTE(stb0899_base_addr, BYTE2),	/* 0x00	Base Address (MSB)	*/
-		GETBYTE(stb0899_base_addr, BYTE3),	/* 0x00	Base Address (MSB)	*/
-	};
-	u8 buf_1[] = {
-		0x00,	/* 0xf3	Reg Offset	*/
-		0x00,	/* 0x44	Reg Offset	*/
-	};
-
-	struct i2c_msg msg_0 = {
-		.addr	= state->config->demod_address,
-		.flags	= 0,
-		.buf	= buf_0,
-		.len	= 6
-	};
-
-	struct i2c_msg msg_1 = {
-		.addr	= state->config->demod_address,
-		.flags	= 0,
-		.buf	= buf_1,
-		.len	= 2
-	};
-
-	struct i2c_msg msg_r = {
-		.addr	= state->config->demod_address,
-		.flags	= I2C_M_RD,
-		.buf	= buf,
-		.len	= 4
-	};
-
-	tmpaddr = stb0899_reg_offset & 0xff00;
-	if (!(stb0899_reg_offset & 0x8))
-		tmpaddr = stb0899_reg_offset | 0x20;
-
-	buf_1[0] = GETBYTE(tmpaddr, BYTE1);
-	buf_1[1] = GETBYTE(tmpaddr, BYTE0);
-
-	status = i2c_transfer(state->i2c, &msg_0, 1);
-	if (status < 1) {
-		if (status != -ERESTARTSYS)
-			printk(KERN_ERR "%s ERR(1), Device=[0x%04x], Base address=[0x%08x], Offset=[0x%04x], Status=%d\n",
-			       __func__, stb0899_i2cdev, stb0899_base_addr, stb0899_reg_offset, status);
-
-		goto err;
-	}
-
-	/* Dummy	*/
-	status = i2c_transfer(state->i2c, &msg_1, 1);
-	if (status < 1)
-		goto err;
-
-	status = i2c_transfer(state->i2c, &msg_r, 1);
-	if (status < 1)
-		goto err;
-
-	buf_1[0] = GETBYTE(stb0899_reg_offset, BYTE1);
-	buf_1[1] = GETBYTE(stb0899_reg_offset, BYTE0);
-
-	/* Actual	*/
-	status = i2c_transfer(state->i2c, &msg_1, 1);
-	if (status < 1) {
-		if (status != -ERESTARTSYS)
-			printk(KERN_ERR "%s ERR(2), Device=[0x%04x], Base address=[0x%08x], Offset=[0x%04x], Status=%d\n",
-			       __func__, stb0899_i2cdev, stb0899_base_addr, stb0899_reg_offset, status);
-		goto err;
-	}
-
-	status = i2c_transfer(state->i2c, &msg_r, 1);
-	if (status < 1) {
-		if (status != -ERESTARTSYS)
-			printk(KERN_ERR "%s ERR(3), Device=[0x%04x], Base address=[0x%08x], Offset=[0x%04x], Status=%d\n",
-			       __func__, stb0899_i2cdev, stb0899_base_addr, stb0899_reg_offset, status);
-		return status < 0 ? status : -EREMOTEIO;
-	}
-
-	data = MAKEWORD32(buf[3], buf[2], buf[1], buf[0]);
-	if (unlikely(*state->verbose >= FE_DEBUGREG))
-		printk(KERN_DEBUG "%s Device=[0x%04x], Base address=[0x%08x], Offset=[0x%04x], Data=[0x%08x]\n",
-		       __func__, stb0899_i2cdev, stb0899_base_addr, stb0899_reg_offset, data);
-
-	return data;
-
-err:
-	return status < 0 ? status : -EREMOTEIO;
-}
-
-int stb0899_write_s2reg(struct stb0899_state *state,
-			u32 stb0899_i2cdev,
-			u32 stb0899_base_addr,
-			u16 stb0899_reg_offset,
-			u32 stb0899_data)
-{
-	int status;
-
-	/* Base Address Setup	*/
-	u8 buf_0[] = {
-		GETBYTE(stb0899_i2cdev, BYTE1),		/* 0xf3	S2 Base Address (MSB)	*/
-		GETBYTE(stb0899_i2cdev, BYTE0),		/* 0xfc	S2 Base Address (LSB)	*/
-		GETBYTE(stb0899_base_addr, BYTE0),	/* 0x00	Base Address (LSB)	*/
-		GETBYTE(stb0899_base_addr, BYTE1),	/* 0x04	Base Address (LSB)	*/
-		GETBYTE(stb0899_base_addr, BYTE2),	/* 0x00	Base Address (MSB)	*/
-		GETBYTE(stb0899_base_addr, BYTE3),	/* 0x00	Base Address (MSB)	*/
-	};
-	u8 buf_1[] = {
-		0x00,	/* 0xf3	Reg Offset	*/
-		0x00,	/* 0x44	Reg Offset	*/
-		0x00,	/* data			*/
-		0x00,	/* data			*/
-		0x00,	/* data			*/
-		0x00,	/* data			*/
-	};
-
-	struct i2c_msg msg_0 = {
-		.addr	= state->config->demod_address,
-		.flags	= 0,
-		.buf	= buf_0,
-		.len	= 6
-	};
-
-	struct i2c_msg msg_1 = {
-		.addr	= state->config->demod_address,
-		.flags	= 0,
-		.buf	= buf_1,
-		.len	= 6
-	};
-
-	buf_1[0] = GETBYTE(stb0899_reg_offset, BYTE1);
-	buf_1[1] = GETBYTE(stb0899_reg_offset, BYTE0);
-	buf_1[2] = GETBYTE(stb0899_data, BYTE0);
-	buf_1[3] = GETBYTE(stb0899_data, BYTE1);
-	buf_1[4] = GETBYTE(stb0899_data, BYTE2);
-	buf_1[5] = GETBYTE(stb0899_data, BYTE3);
-
-	if (unlikely(*state->verbose >= FE_DEBUGREG))
-		printk(KERN_DEBUG "%s Device=[0x%04x], Base Address=[0x%08x], Offset=[0x%04x], Data=[0x%08x]\n",
-		       __func__, stb0899_i2cdev, stb0899_base_addr, stb0899_reg_offset, stb0899_data);
-
-	status = i2c_transfer(state->i2c, &msg_0, 1);
-	if (unlikely(status < 1)) {
-		if (status != -ERESTARTSYS)
-			printk(KERN_ERR "%s ERR (1), Device=[0x%04x], Base Address=[0x%08x], Offset=[0x%04x], Data=[0x%08x], status=%d\n",
-			       __func__, stb0899_i2cdev, stb0899_base_addr, stb0899_reg_offset, stb0899_data, status);
-		goto err;
-	}
-	status = i2c_transfer(state->i2c, &msg_1, 1);
-	if (unlikely(status < 1)) {
-		if (status != -ERESTARTSYS)
-			printk(KERN_ERR "%s ERR (2), Device=[0x%04x], Base Address=[0x%08x], Offset=[0x%04x], Data=[0x%08x], status=%d\n",
-			       __func__, stb0899_i2cdev, stb0899_base_addr, stb0899_reg_offset, stb0899_data, status);
-
-		return status < 0 ? status : -EREMOTEIO;
-	}
-
-	return 0;
-
-err:
-	return status < 0 ? status : -EREMOTEIO;
-}
-
-int stb0899_read_regs(struct stb0899_state *state, unsigned int reg, u8 *buf, u32 count)
-{
-	int status;
-
-	u8 b0[] = { reg >> 8, reg & 0xff };
-
-	struct i2c_msg msg[] = {
-		{
-			.addr	= state->config->demod_address,
-			.flags	= 0,
-			.buf	= b0,
-			.len	= 2
-		},{
-			.addr	= state->config->demod_address,
-			.flags	= I2C_M_RD,
-			.buf	= buf,
-			.len	= count
-		}
-	};
-
-	status = i2c_transfer(state->i2c, msg, 2);
-	if (status != 2) {
-		if (status != -ERESTARTSYS)
-			printk(KERN_ERR "%s Read error, Reg=[0x%04x], Count=%u, Status=%d\n",
-			       __func__, reg, count, status);
-		goto err;
-	}
-	/*
-	 * Bug ID 9:
-	 * access to 0xf2xx/0xf6xx
-	 * must be followed by read from 0xf2ff/0xf6ff.
-	 */
-	if ((reg != 0xf2ff) && (reg != 0xf6ff) &&
-	    (((reg & 0xff00) == 0xf200) || ((reg & 0xff00) == 0xf600)))
-		_stb0899_read_reg(state, (reg | 0x00ff));
-
-	if (unlikely(*state->verbose >= FE_DEBUGREG)) {
-		int i;
-
-		printk(KERN_DEBUG "%s [0x%04x]:", __func__, reg);
-		for (i = 0; i < count; i++) {
-			printk(" %02x", buf[i]);
-		}
-		printk("\n");
-	}
-
-	return 0;
-err:
-	return status < 0 ? status : -EREMOTEIO;
-}
-
-int stb0899_write_regs(struct stb0899_state *state, unsigned int reg, u8 *data, u32 count)
-{
-	int ret;
-	u8 buf[2 + count];
-	struct i2c_msg i2c_msg = {
-		.addr	= state->config->demod_address,
-		.flags	= 0,
-		.buf	= buf,
-		.len	= 2 + count
-	};
-
-	buf[0] = reg >> 8;
-	buf[1] = reg & 0xff;
-	memcpy(&buf[2], data, count);
-
-	if (unlikely(*state->verbose >= FE_DEBUGREG)) {
-		int i;
-
-		printk(KERN_DEBUG "%s [0x%04x]:", __func__, reg);
-		for (i = 0; i < count; i++)
-			printk(" %02x", data[i]);
-		printk("\n");
-	}
-	ret = i2c_transfer(state->i2c, &i2c_msg, 1);
-
-	/*
-	 * Bug ID 9:
-	 * access to 0xf2xx/0xf6xx
-	 * must be followed by read from 0xf2ff/0xf6ff.
-	 */
-	if ((((reg & 0xff00) == 0xf200) || ((reg & 0xff00) == 0xf600)))
-		stb0899_read_reg(state, (reg | 0x00ff));
-
-	if (ret != 1) {
-		if (ret != -ERESTARTSYS)
-			dprintk(state->verbose, FE_ERROR, 1, "Reg=[0x%04x], Data=[0x%02x ...], Count=%u, Status=%d",
-				reg, data[0], count, ret);
-		return ret < 0 ? ret : -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-int stb0899_write_reg(struct stb0899_state *state, unsigned int reg, u8 data)
-{
-	return stb0899_write_regs(state, reg, &data, 1);
-}
-
-/*
- * stb0899_get_mclk
- * Get STB0899 master clock frequency
- * ExtClk: external clock frequency (Hz)
- */
-static u32 stb0899_get_mclk(struct stb0899_state *state)
-{
-	u32 mclk = 0, div = 0;
-
-	div = stb0899_read_reg(state, STB0899_NCOARSE);
-	mclk = (div + 1) * state->config->xtal_freq / 6;
-	dprintk(state->verbose, FE_DEBUG, 1, "div=%d, mclk=%d", div, mclk);
-
-	return mclk;
-}
-
-/*
- * stb0899_set_mclk
- * Set STB0899 master Clock frequency
- * Mclk: demodulator master clock
- * ExtClk: external clock frequency (Hz)
- */
-static void stb0899_set_mclk(struct stb0899_state *state, u32 Mclk)
-{
-	struct stb0899_internal *internal = &state->internal;
-	u8 mdiv = 0;
-
-	dprintk(state->verbose, FE_DEBUG, 1, "state->config=%p", state->config);
-	mdiv = ((6 * Mclk) / state->config->xtal_freq) - 1;
-	dprintk(state->verbose, FE_DEBUG, 1, "mdiv=%d", mdiv);
-
-	stb0899_write_reg(state, STB0899_NCOARSE, mdiv);
-	internal->master_clk = stb0899_get_mclk(state);
-
-	dprintk(state->verbose, FE_DEBUG, 1, "MasterCLOCK=%d", internal->master_clk);
-}
-
-static int stb0899_postproc(struct stb0899_state *state, u8 ctl, int enable)
-{
-	struct stb0899_config *config		= state->config;
-	const struct stb0899_postproc *postproc	= config->postproc;
-
-	/* post process event */
-	if (postproc) {
-		if (enable) {
-			if (postproc[ctl].level == STB0899_GPIOPULLUP)
-				stb0899_write_reg(state, postproc[ctl].gpio, 0x02);
-			else
-				stb0899_write_reg(state, postproc[ctl].gpio, 0x82);
-		} else {
-			if (postproc[ctl].level == STB0899_GPIOPULLUP)
-				stb0899_write_reg(state, postproc[ctl].gpio, 0x82);
-			else
-				stb0899_write_reg(state, postproc[ctl].gpio, 0x02);
-		}
-	}
-	return 0;
-}
-
-static void stb0899_release(struct dvb_frontend *fe)
-{
-	struct stb0899_state *state = fe->demodulator_priv;
-
-	dprintk(state->verbose, FE_DEBUG, 1, "Release Frontend");
-	/* post process event */
-	stb0899_postproc(state, STB0899_POSTPROC_GPIO_POWER, 0);
-	kfree(state);
-}
-
-/*
- * stb0899_get_alpha
- * return: rolloff
- */
-static int stb0899_get_alpha(struct stb0899_state *state)
-{
-	u8 mode_coeff;
-
-	mode_coeff = stb0899_read_reg(state, STB0899_DEMOD);
-
-	if (STB0899_GETFIELD(MODECOEFF, mode_coeff) == 1)
-		return 20;
-	else
-		return 35;
-}
-
-/*
- * stb0899_init_calc
- */
-static void stb0899_init_calc(struct stb0899_state *state)
-{
-	struct stb0899_internal *internal = &state->internal;
-	int master_clk;
-	u8 agc[2];
-	u32 reg;
-
-	/* Read registers (in burst mode)	*/
-	stb0899_read_regs(state, STB0899_AGC1REF, agc, 2); /* AGC1R and AGC2O	*/
-
-	/* Initial calculations	*/
-	master_clk			= stb0899_get_mclk(state);
-	internal->t_agc1		= 0;
-	internal->t_agc2		= 0;
-	internal->master_clk		= master_clk;
-	internal->mclk			= master_clk / 65536L;
-	internal->rolloff		= stb0899_get_alpha(state);
-
-	/* DVBS2 Initial calculations	*/
-	/* Set AGC value to the middle	*/
-	internal->agc_gain		= 8154;
-	reg = STB0899_READ_S2REG(STB0899_S2DEMOD, IF_AGC_CNTRL);
-	STB0899_SETFIELD_VAL(IF_GAIN_INIT, reg, internal->agc_gain);
-	stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_IF_AGC_CNTRL, STB0899_OFF0_IF_AGC_CNTRL, reg);
-
-	reg = STB0899_READ_S2REG(STB0899_S2DEMOD, RRC_ALPHA);
-	internal->rrc_alpha		= STB0899_GETFIELD(RRC_ALPHA, reg);
-
-	internal->center_freq		= 0;
-	internal->av_frame_coarse	= 10;
-	internal->av_frame_fine		= 20;
-	internal->step_size		= 2;
-/*
-	if ((pParams->SpectralInv == FE_IQ_NORMAL) || (pParams->SpectralInv == FE_IQ_AUTO))
-		pParams->IQLocked = 0;
-	else
-		pParams->IQLocked = 1;
-*/
-}
-
-static int stb0899_wait_diseqc_fifo_empty(struct stb0899_state *state, int timeout)
-{
-	u8 reg = 0;
-	unsigned long start = jiffies;
-
-	while (1) {
-		reg = stb0899_read_reg(state, STB0899_DISSTATUS);
-		if (!STB0899_GETFIELD(FIFOFULL, reg))
-			break;
-		if ((jiffies - start) > timeout) {
-			dprintk(state->verbose, FE_ERROR, 1, "timed out !!");
-			return -ETIMEDOUT;
-		}
-	}
-
-	return 0;
-}
-
-static int stb0899_send_diseqc_msg(struct dvb_frontend *fe, struct dvb_diseqc_master_cmd *cmd)
-{
-	struct stb0899_state *state = fe->demodulator_priv;
-	u8 reg, i;
-
-	if (cmd->msg_len > 8)
-		return -EINVAL;
-
-	/* enable FIFO precharge	*/
-	reg = stb0899_read_reg(state, STB0899_DISCNTRL1);
-	STB0899_SETFIELD_VAL(DISPRECHARGE, reg, 1);
-	stb0899_write_reg(state, STB0899_DISCNTRL1, reg);
-	for (i = 0; i < cmd->msg_len; i++) {
-		/* wait for FIFO empty	*/
-		if (stb0899_wait_diseqc_fifo_empty(state, 100) < 0)
-			return -ETIMEDOUT;
-
-		stb0899_write_reg(state, STB0899_DISFIFO, cmd->msg[i]);
-	}
-	reg = stb0899_read_reg(state, STB0899_DISCNTRL1);
-	STB0899_SETFIELD_VAL(DISPRECHARGE, reg, 0);
-	stb0899_write_reg(state, STB0899_DISCNTRL1, reg);
-	msleep(100);
-	return 0;
-}
-
-static int stb0899_wait_diseqc_rxidle(struct stb0899_state *state, int timeout)
-{
-	u8 reg = 0;
-	unsigned long start = jiffies;
-
-	while (!STB0899_GETFIELD(RXEND, reg)) {
-		reg = stb0899_read_reg(state, STB0899_DISRX_ST0);
-		if (jiffies - start > timeout) {
-			dprintk(state->verbose, FE_ERROR, 1, "timed out!!");
-			return -ETIMEDOUT;
-		}
-		msleep(10);
-	}
-
-	return 0;
-}
-
-static int stb0899_recv_slave_reply(struct dvb_frontend *fe, struct dvb_diseqc_slave_reply *reply)
-{
-	struct stb0899_state *state = fe->demodulator_priv;
-	u8 reg, length = 0, i;
-	int result;
-
-	if (stb0899_wait_diseqc_rxidle(state, 100) < 0)
-		return -ETIMEDOUT;
-
-	reg = stb0899_read_reg(state, STB0899_DISRX_ST0);
-	if (STB0899_GETFIELD(RXEND, reg)) {
-
-		reg = stb0899_read_reg(state, STB0899_DISRX_ST1);
-		length = STB0899_GETFIELD(FIFOBYTENBR, reg);
-
-		if (length > sizeof (reply->msg)) {
-			result = -EOVERFLOW;
-			goto exit;
-		}
-		reply->msg_len = length;
-
-		/* extract data */
-		for (i = 0; i < length; i++)
-			reply->msg[i] = stb0899_read_reg(state, STB0899_DISFIFO);
-	}
-
-	return 0;
-exit:
-
-	return result;
-}
-
-static int stb0899_wait_diseqc_txidle(struct stb0899_state *state, int timeout)
-{
-	u8 reg = 0;
-	unsigned long start = jiffies;
-
-	while (!STB0899_GETFIELD(TXIDLE, reg)) {
-		reg = stb0899_read_reg(state, STB0899_DISSTATUS);
-		if (jiffies - start > timeout) {
-			dprintk(state->verbose, FE_ERROR, 1, "timed out!!");
-			return -ETIMEDOUT;
-		}
-		msleep(10);
-	}
-	return 0;
-}
-
-static int stb0899_send_diseqc_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t burst)
-{
-	struct stb0899_state *state = fe->demodulator_priv;
-	u8 reg, old_state;
-
-	/* wait for diseqc idle	*/
-	if (stb0899_wait_diseqc_txidle(state, 100) < 0)
-		return -ETIMEDOUT;
-
-	reg = stb0899_read_reg(state, STB0899_DISCNTRL1);
-	old_state = reg;
-	/* set to burst mode	*/
-	STB0899_SETFIELD_VAL(DISEQCMODE, reg, 0x03);
-	STB0899_SETFIELD_VAL(DISPRECHARGE, reg, 0x01);
-	stb0899_write_reg(state, STB0899_DISCNTRL1, reg);
-	switch (burst) {
-	case SEC_MINI_A:
-		/* unmodulated	*/
-		stb0899_write_reg(state, STB0899_DISFIFO, 0x00);
-		break;
-	case SEC_MINI_B:
-		/* modulated	*/
-		stb0899_write_reg(state, STB0899_DISFIFO, 0xff);
-		break;
-	}
-	reg = stb0899_read_reg(state, STB0899_DISCNTRL1);
-	STB0899_SETFIELD_VAL(DISPRECHARGE, reg, 0x00);
-	stb0899_write_reg(state, STB0899_DISCNTRL1, reg);
-	/* wait for diseqc idle	*/
-	if (stb0899_wait_diseqc_txidle(state, 100) < 0)
-		return -ETIMEDOUT;
-
-	/* restore state	*/
-	stb0899_write_reg(state, STB0899_DISCNTRL1, old_state);
-
-	return 0;
-}
-
-static int stb0899_diseqc_init(struct stb0899_state *state)
-{
-/*
-	struct dvb_diseqc_slave_reply rx_data;
-*/
-	u8 f22_tx, reg;
-
-	u32 mclk, tx_freq = 22000;/* count = 0, i; */
-	reg = stb0899_read_reg(state, STB0899_DISCNTRL2);
-	STB0899_SETFIELD_VAL(ONECHIP_TRX, reg, 0);
-	stb0899_write_reg(state, STB0899_DISCNTRL2, reg);
-
-	/* disable Tx spy	*/
-	reg = stb0899_read_reg(state, STB0899_DISCNTRL1);
-	STB0899_SETFIELD_VAL(DISEQCRESET, reg, 1);
-	stb0899_write_reg(state, STB0899_DISCNTRL1, reg);
-
-	reg = stb0899_read_reg(state, STB0899_DISCNTRL1);
-	STB0899_SETFIELD_VAL(DISEQCRESET, reg, 0);
-	stb0899_write_reg(state, STB0899_DISCNTRL1, reg);
-
-	mclk = stb0899_get_mclk(state);
-	f22_tx = mclk / (tx_freq * 32);
-	stb0899_write_reg(state, STB0899_DISF22, f22_tx); /* DiSEqC Tx freq	*/
-	state->rx_freq = 20000;
-
-	return 0;
-}
-
-static int stb0899_sleep(struct dvb_frontend *fe)
-{
-	struct stb0899_state *state = fe->demodulator_priv;
-/*
-	u8 reg;
-*/
-	dprintk(state->verbose, FE_DEBUG, 1, "Going to Sleep .. (Really tired .. :-))");
-	/* post process event */
-	stb0899_postproc(state, STB0899_POSTPROC_GPIO_POWER, 0);
-
-	return 0;
-}
-
-static int stb0899_wakeup(struct dvb_frontend *fe)
-{
-	int rc;
-	struct stb0899_state *state = fe->demodulator_priv;
-
-	if ((rc = stb0899_write_reg(state, STB0899_SYNTCTRL, STB0899_SELOSCI)))
-		return rc;
-	/* Activate all clocks; DVB-S2 registers are inaccessible otherwise. */
-	if ((rc = stb0899_write_reg(state, STB0899_STOPCLK1, 0x00)))
-		return rc;
-	if ((rc = stb0899_write_reg(state, STB0899_STOPCLK2, 0x00)))
-		return rc;
-
-	/* post process event */
-	stb0899_postproc(state, STB0899_POSTPROC_GPIO_POWER, 1);
-
-	return 0;
-}
-
-static int stb0899_init(struct dvb_frontend *fe)
-{
-	int i;
-	struct stb0899_state *state = fe->demodulator_priv;
-	struct stb0899_config *config = state->config;
-
-	dprintk(state->verbose, FE_DEBUG, 1, "Initializing STB0899 ... ");
-
-	/* init device		*/
-	dprintk(state->verbose, FE_DEBUG, 1, "init device");
-	for (i = 0; config->init_dev[i].address != 0xffff; i++)
-		stb0899_write_reg(state, config->init_dev[i].address, config->init_dev[i].data);
-
-	dprintk(state->verbose, FE_DEBUG, 1, "init S2 demod");
-	/* init S2 demod	*/
-	for (i = 0; config->init_s2_demod[i].offset != 0xffff; i++)
-		stb0899_write_s2reg(state, STB0899_S2DEMOD,
-				    config->init_s2_demod[i].base_address,
-				    config->init_s2_demod[i].offset,
-				    config->init_s2_demod[i].data);
-
-	dprintk(state->verbose, FE_DEBUG, 1, "init S1 demod");
-	/* init S1 demod	*/
-	for (i = 0; config->init_s1_demod[i].address != 0xffff; i++)
-		stb0899_write_reg(state, config->init_s1_demod[i].address, config->init_s1_demod[i].data);
-
-	dprintk(state->verbose, FE_DEBUG, 1, "init S2 FEC");
-	/* init S2 fec		*/
-	for (i = 0; config->init_s2_fec[i].offset != 0xffff; i++)
-		stb0899_write_s2reg(state, STB0899_S2FEC,
-				    config->init_s2_fec[i].base_address,
-				    config->init_s2_fec[i].offset,
-				    config->init_s2_fec[i].data);
-
-	dprintk(state->verbose, FE_DEBUG, 1, "init TST");
-	/* init test		*/
-	for (i = 0; config->init_tst[i].address != 0xffff; i++)
-		stb0899_write_reg(state, config->init_tst[i].address, config->init_tst[i].data);
-
-	stb0899_init_calc(state);
-	stb0899_diseqc_init(state);
-
-	return 0;
-}
-
-static int stb0899_table_lookup(const struct stb0899_tab *tab, int max, int val)
-{
-	int res = 0;
-	int min = 0, med;
-
-	if (val < tab[min].read)
-		res = tab[min].real;
-	else if (val >= tab[max].read)
-		res = tab[max].real;
-	else {
-		while ((max - min) > 1) {
-			med = (max + min) / 2;
-			if (val >= tab[min].read && val < tab[med].read)
-				max = med;
-			else
-				min = med;
-		}
-		res = ((val - tab[min].read) *
-		       (tab[max].real - tab[min].real) /
-		       (tab[max].read - tab[min].read)) +
-			tab[min].real;
-	}
-
-	return res;
-}
-
-static int stb0899_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	struct stb0899_state *state		= fe->demodulator_priv;
-	struct stb0899_internal *internal	= &state->internal;
-
-	int val;
-	u32 reg;
-	*strength = 0;
-	switch (state->delsys) {
-	case SYS_DVBS:
-	case SYS_DSS:
-		if (internal->lock) {
-			reg  = stb0899_read_reg(state, STB0899_VSTATUS);
-			if (STB0899_GETFIELD(VSTATUS_LOCKEDVIT, reg)) {
-
-				reg = stb0899_read_reg(state, STB0899_AGCIQIN);
-				val = (s32)(s8)STB0899_GETFIELD(AGCIQVALUE, reg);
-
-				*strength = stb0899_table_lookup(stb0899_dvbsrf_tab, ARRAY_SIZE(stb0899_dvbsrf_tab) - 1, val);
-				*strength += 750;
-				dprintk(state->verbose, FE_DEBUG, 1, "AGCIQVALUE = 0x%02x, C = %d * 0.1 dBm",
-					val & 0xff, *strength);
-			}
-		}
-		break;
-	case SYS_DVBS2:
-		if (internal->lock) {
-			reg = STB0899_READ_S2REG(STB0899_S2DEMOD, IF_AGC_GAIN);
-			val = STB0899_GETFIELD(IF_AGC_GAIN, reg);
-
-			*strength = stb0899_table_lookup(stb0899_dvbs2rf_tab, ARRAY_SIZE(stb0899_dvbs2rf_tab) - 1, val);
-			*strength += 950;
-			dprintk(state->verbose, FE_DEBUG, 1, "IF_AGC_GAIN = 0x%04x, C = %d * 0.1 dBm",
-				val & 0x3fff, *strength);
-		}
-		break;
-	default:
-		dprintk(state->verbose, FE_DEBUG, 1, "Unsupported delivery system");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int stb0899_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct stb0899_state *state		= fe->demodulator_priv;
-	struct stb0899_internal *internal	= &state->internal;
-
-	unsigned int val, quant, quantn = -1, est, estn = -1;
-	u8 buf[2];
-	u32 reg;
-
-	*snr = 0;
-	reg  = stb0899_read_reg(state, STB0899_VSTATUS);
-	switch (state->delsys) {
-	case SYS_DVBS:
-	case SYS_DSS:
-		if (internal->lock) {
-			if (STB0899_GETFIELD(VSTATUS_LOCKEDVIT, reg)) {
-
-				stb0899_read_regs(state, STB0899_NIRM, buf, 2);
-				val = MAKEWORD16(buf[0], buf[1]);
-
-				*snr = stb0899_table_lookup(stb0899_cn_tab, ARRAY_SIZE(stb0899_cn_tab) - 1, val);
-				dprintk(state->verbose, FE_DEBUG, 1, "NIR = 0x%02x%02x = %u, C/N = %d * 0.1 dBm\n",
-					buf[0], buf[1], val, *snr);
-			}
-		}
-		break;
-	case SYS_DVBS2:
-		if (internal->lock) {
-			reg = STB0899_READ_S2REG(STB0899_S2DEMOD, UWP_CNTRL1);
-			quant = STB0899_GETFIELD(UWP_ESN0_QUANT, reg);
-			reg = STB0899_READ_S2REG(STB0899_S2DEMOD, UWP_STAT2);
-			est = STB0899_GETFIELD(ESN0_EST, reg);
-			if (est == 1)
-				val = 301; /* C/N = 30.1 dB */
-			else if (est == 2)
-				val = 270; /* C/N = 27.0 dB */
-			else {
-				/* quantn = 100 * log(quant^2) */
-				quantn = stb0899_table_lookup(stb0899_quant_tab, ARRAY_SIZE(stb0899_quant_tab) - 1, quant * 100);
-				/* estn = 100 * log(est) */
-				estn = stb0899_table_lookup(stb0899_est_tab, ARRAY_SIZE(stb0899_est_tab) - 1, est);
-				/* snr(dBm/10) = -10*(log(est)-log(quant^2)) => snr(dBm/10) = (100*log(quant^2)-100*log(est))/10 */
-				val = (quantn - estn) / 10;
-			}
-			*snr = val;
-			dprintk(state->verbose, FE_DEBUG, 1, "Es/N0 quant = %d (%d) estimate = %u (%d), C/N = %d * 0.1 dBm",
-				quant, quantn, est, estn, val);
-		}
-		break;
-	default:
-		dprintk(state->verbose, FE_DEBUG, 1, "Unsupported delivery system");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int stb0899_read_status(struct dvb_frontend *fe, enum fe_status *status)
-{
-	struct stb0899_state *state		= fe->demodulator_priv;
-	struct stb0899_internal *internal	= &state->internal;
-	u8 reg;
-	*status = 0;
-
-	switch (state->delsys) {
-	case SYS_DVBS:
-	case SYS_DSS:
-		dprintk(state->verbose, FE_DEBUG, 1, "Delivery system DVB-S/DSS");
-		if (internal->lock) {
-			reg  = stb0899_read_reg(state, STB0899_VSTATUS);
-			if (STB0899_GETFIELD(VSTATUS_LOCKEDVIT, reg)) {
-				dprintk(state->verbose, FE_DEBUG, 1, "--------> FE_HAS_CARRIER | FE_HAS_LOCK");
-				*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK;
-
-				reg = stb0899_read_reg(state, STB0899_PLPARM);
-				if (STB0899_GETFIELD(VITCURPUN, reg)) {
-					dprintk(state->verbose, FE_DEBUG, 1, "--------> FE_HAS_VITERBI | FE_HAS_SYNC");
-					*status |= FE_HAS_VITERBI | FE_HAS_SYNC;
-					/* post process event */
-					stb0899_postproc(state, STB0899_POSTPROC_GPIO_LOCK, 1);
-				}
-			}
-		}
-		break;
-	case SYS_DVBS2:
-		dprintk(state->verbose, FE_DEBUG, 1, "Delivery system DVB-S2");
-		if (internal->lock) {
-			reg = STB0899_READ_S2REG(STB0899_S2DEMOD, DMD_STAT2);
-			if (STB0899_GETFIELD(UWP_LOCK, reg) && STB0899_GETFIELD(CSM_LOCK, reg)) {
-				*status |= FE_HAS_CARRIER;
-				dprintk(state->verbose, FE_DEBUG, 1,
-					"UWP & CSM Lock ! ---> DVB-S2 FE_HAS_CARRIER");
-
-				reg = stb0899_read_reg(state, STB0899_CFGPDELSTATUS1);
-				if (STB0899_GETFIELD(CFGPDELSTATUS_LOCK, reg)) {
-					*status |= FE_HAS_LOCK;
-					dprintk(state->verbose, FE_DEBUG, 1,
-						"Packet Delineator Locked ! -----> DVB-S2 FE_HAS_LOCK");
-
-				}
-				if (STB0899_GETFIELD(CONTINUOUS_STREAM, reg)) {
-					*status |= FE_HAS_VITERBI;
-					dprintk(state->verbose, FE_DEBUG, 1,
-						"Packet Delineator found VITERBI ! -----> DVB-S2 FE_HAS_VITERBI");
-				}
-				if (STB0899_GETFIELD(ACCEPTED_STREAM, reg)) {
-					*status |= FE_HAS_SYNC;
-					dprintk(state->verbose, FE_DEBUG, 1,
-						"Packet Delineator found SYNC ! -----> DVB-S2 FE_HAS_SYNC");
-					/* post process event */
-					stb0899_postproc(state, STB0899_POSTPROC_GPIO_LOCK, 1);
-				}
-			}
-		}
-		break;
-	default:
-		dprintk(state->verbose, FE_DEBUG, 1, "Unsupported delivery system");
-		return -EINVAL;
-	}
-	return 0;
-}
-
-/*
- * stb0899_get_error
- * viterbi error for DVB-S/DSS
- * packet error for DVB-S2
- * Bit Error Rate or Packet Error Rate * 10 ^ 7
- */
-static int stb0899_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct stb0899_state *state		= fe->demodulator_priv;
-	struct stb0899_internal *internal	= &state->internal;
-
-	u8  lsb, msb;
-
-	*ber = 0;
-
-	switch (state->delsys) {
-	case SYS_DVBS:
-	case SYS_DSS:
-		if (internal->lock) {
-			lsb = stb0899_read_reg(state, STB0899_ECNT1L);
-			msb = stb0899_read_reg(state, STB0899_ECNT1M);
-			*ber = MAKEWORD16(msb, lsb);
-			/* Viterbi Check	*/
-			if (STB0899_GETFIELD(VSTATUS_PRFVIT, internal->v_status)) {
-				/* Error Rate		*/
-				*ber *= 9766;
-				/* ber = ber * 10 ^ 7	*/
-				*ber /= (-1 + (1 << (2 * STB0899_GETFIELD(NOE, internal->err_ctrl))));
-				*ber /= 8;
-			}
-		}
-		break;
-	case SYS_DVBS2:
-		if (internal->lock) {
-			lsb = stb0899_read_reg(state, STB0899_ECNT1L);
-			msb = stb0899_read_reg(state, STB0899_ECNT1M);
-			*ber = MAKEWORD16(msb, lsb);
-			/* ber = ber * 10 ^ 7	*/
-			*ber *= 10000000;
-			*ber /= (-1 + (1 << (4 + 2 * STB0899_GETFIELD(NOE, internal->err_ctrl))));
-		}
-		break;
-	default:
-		dprintk(state->verbose, FE_DEBUG, 1, "Unsupported delivery system");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int stb0899_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-{
-	struct stb0899_state *state = fe->demodulator_priv;
-
-	switch (voltage) {
-	case SEC_VOLTAGE_13:
-		stb0899_write_reg(state, STB0899_GPIO00CFG, 0x82);
-		stb0899_write_reg(state, STB0899_GPIO01CFG, 0x02);
-		stb0899_write_reg(state, STB0899_GPIO02CFG, 0x00);
-		break;
-	case SEC_VOLTAGE_18:
-		stb0899_write_reg(state, STB0899_GPIO00CFG, 0x02);
-		stb0899_write_reg(state, STB0899_GPIO01CFG, 0x02);
-		stb0899_write_reg(state, STB0899_GPIO02CFG, 0x82);
-		break;
-	case SEC_VOLTAGE_OFF:
-		stb0899_write_reg(state, STB0899_GPIO00CFG, 0x82);
-		stb0899_write_reg(state, STB0899_GPIO01CFG, 0x82);
-		stb0899_write_reg(state, STB0899_GPIO02CFG, 0x82);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int stb0899_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
-{
-	struct stb0899_state *state = fe->demodulator_priv;
-	struct stb0899_internal *internal = &state->internal;
-
-	u8 div, reg;
-
-	/* wait for diseqc idle	*/
-	if (stb0899_wait_diseqc_txidle(state, 100) < 0)
-		return -ETIMEDOUT;
-
-	switch (tone) {
-	case SEC_TONE_ON:
-		div = (internal->master_clk / 100) / 5632;
-		div = (div + 5) / 10;
-		stb0899_write_reg(state, STB0899_DISEQCOCFG, 0x66);
-		reg = stb0899_read_reg(state, STB0899_ACRPRESC);
-		STB0899_SETFIELD_VAL(ACRPRESC, reg, 0x03);
-		stb0899_write_reg(state, STB0899_ACRPRESC, reg);
-		stb0899_write_reg(state, STB0899_ACRDIV1, div);
-		break;
-	case SEC_TONE_OFF:
-		stb0899_write_reg(state, STB0899_DISEQCOCFG, 0x20);
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-int stb0899_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	int i2c_stat;
-	struct stb0899_state *state = fe->demodulator_priv;
-
-	i2c_stat = stb0899_read_reg(state, STB0899_I2CRPT);
-	if (i2c_stat < 0)
-		goto err;
-
-	if (enable) {
-		dprintk(state->verbose, FE_DEBUG, 1, "Enabling I2C Repeater ...");
-		i2c_stat |=  STB0899_I2CTON;
-		if (stb0899_write_reg(state, STB0899_I2CRPT, i2c_stat) < 0)
-			goto err;
-	} else {
-		dprintk(state->verbose, FE_DEBUG, 1, "Disabling I2C Repeater ...");
-		i2c_stat &= ~STB0899_I2CTON;
-		if (stb0899_write_reg(state, STB0899_I2CRPT, i2c_stat) < 0)
-			goto err;
-	}
-	return 0;
-err:
-	dprintk(state->verbose, FE_ERROR, 1, "I2C Repeater control failed");
-	return -EREMOTEIO;
-}
-
-
-static inline void CONVERT32(u32 x, char *str)
-{
-	*str++	= (x >> 24) & 0xff;
-	*str++	= (x >> 16) & 0xff;
-	*str++	= (x >>  8) & 0xff;
-	*str++	= (x >>  0) & 0xff;
-	*str	= '\0';
-}
-
-int stb0899_get_dev_id(struct stb0899_state *state)
-{
-	u8 chip_id, release;
-	u16 id;
-	u32 demod_ver = 0, fec_ver = 0;
-	char demod_str[5] = { 0 };
-	char fec_str[5] = { 0 };
-
-	id = stb0899_read_reg(state, STB0899_DEV_ID);
-	dprintk(state->verbose, FE_DEBUG, 1, "ID reg=[0x%02x]", id);
-	chip_id = STB0899_GETFIELD(CHIP_ID, id);
-	release = STB0899_GETFIELD(CHIP_REL, id);
-
-	dprintk(state->verbose, FE_ERROR, 1, "Device ID=[%d], Release=[%d]",
-		chip_id, release);
-
-	CONVERT32(STB0899_READ_S2REG(STB0899_S2DEMOD, DMD_CORE_ID), (char *)&demod_str);
-
-	demod_ver = STB0899_READ_S2REG(STB0899_S2DEMOD, DMD_VERSION_ID);
-	dprintk(state->verbose, FE_ERROR, 1, "Demodulator Core ID=[%s], Version=[%d]", (char *) &demod_str, demod_ver);
-	CONVERT32(STB0899_READ_S2REG(STB0899_S2FEC, FEC_CORE_ID_REG), (char *)&fec_str);
-	fec_ver = STB0899_READ_S2REG(STB0899_S2FEC, FEC_VER_ID_REG);
-	if (! (chip_id > 0)) {
-		dprintk(state->verbose, FE_ERROR, 1, "couldn't find a STB 0899");
-
-		return -ENODEV;
-	}
-	dprintk(state->verbose, FE_ERROR, 1, "FEC Core ID=[%s], Version=[%d]", (char*) &fec_str, fec_ver);
-
-	return 0;
-}
-
-static void stb0899_set_delivery(struct stb0899_state *state)
-{
-	u8 reg;
-	u8 stop_clk[2];
-
-	stop_clk[0] = stb0899_read_reg(state, STB0899_STOPCLK1);
-	stop_clk[1] = stb0899_read_reg(state, STB0899_STOPCLK2);
-
-	switch (state->delsys) {
-	case SYS_DVBS:
-		dprintk(state->verbose, FE_DEBUG, 1, "Delivery System -- DVB-S");
-		/* FECM/Viterbi ON	*/
-		reg = stb0899_read_reg(state, STB0899_FECM);
-		STB0899_SETFIELD_VAL(FECM_RSVD0, reg, 0);
-		STB0899_SETFIELD_VAL(FECM_VITERBI_ON, reg, 1);
-		stb0899_write_reg(state, STB0899_FECM, reg);
-
-		stb0899_write_reg(state, STB0899_RSULC, 0xb1);
-		stb0899_write_reg(state, STB0899_TSULC, 0x40);
-		stb0899_write_reg(state, STB0899_RSLLC, 0x42);
-		stb0899_write_reg(state, STB0899_TSLPL, 0x12);
-
-		reg = stb0899_read_reg(state, STB0899_TSTRES);
-		STB0899_SETFIELD_VAL(FRESLDPC, reg, 1);
-		stb0899_write_reg(state, STB0899_TSTRES, reg);
-
-		STB0899_SETFIELD_VAL(STOP_CHK8PSK, stop_clk[0], 1);
-		STB0899_SETFIELD_VAL(STOP_CKFEC108, stop_clk[0], 1);
-		STB0899_SETFIELD_VAL(STOP_CKFEC216, stop_clk[0], 1);
-
-		STB0899_SETFIELD_VAL(STOP_CKPKDLIN108, stop_clk[1], 1);
-		STB0899_SETFIELD_VAL(STOP_CKPKDLIN216, stop_clk[1], 1);
-
-		STB0899_SETFIELD_VAL(STOP_CKINTBUF216, stop_clk[0], 1);
-		STB0899_SETFIELD_VAL(STOP_CKCORE216, stop_clk[0], 0);
-
-		STB0899_SETFIELD_VAL(STOP_CKS2DMD108, stop_clk[1], 1);
-		break;
-	case SYS_DVBS2:
-		/* FECM/Viterbi OFF	*/
-		reg = stb0899_read_reg(state, STB0899_FECM);
-		STB0899_SETFIELD_VAL(FECM_RSVD0, reg, 0);
-		STB0899_SETFIELD_VAL(FECM_VITERBI_ON, reg, 0);
-		stb0899_write_reg(state, STB0899_FECM, reg);
-
-		stb0899_write_reg(state, STB0899_RSULC, 0xb1);
-		stb0899_write_reg(state, STB0899_TSULC, 0x42);
-		stb0899_write_reg(state, STB0899_RSLLC, 0x40);
-		stb0899_write_reg(state, STB0899_TSLPL, 0x02);
-
-		reg = stb0899_read_reg(state, STB0899_TSTRES);
-		STB0899_SETFIELD_VAL(FRESLDPC, reg, 0);
-		stb0899_write_reg(state, STB0899_TSTRES, reg);
-
-		STB0899_SETFIELD_VAL(STOP_CHK8PSK, stop_clk[0], 1);
-		STB0899_SETFIELD_VAL(STOP_CKFEC108, stop_clk[0], 0);
-		STB0899_SETFIELD_VAL(STOP_CKFEC216, stop_clk[0], 0);
-
-		STB0899_SETFIELD_VAL(STOP_CKPKDLIN108, stop_clk[1], 0);
-		STB0899_SETFIELD_VAL(STOP_CKPKDLIN216, stop_clk[1], 0);
-
-		STB0899_SETFIELD_VAL(STOP_CKINTBUF216, stop_clk[0], 0);
-		STB0899_SETFIELD_VAL(STOP_CKCORE216, stop_clk[0], 0);
-
-		STB0899_SETFIELD_VAL(STOP_CKS2DMD108, stop_clk[1], 0);
-		break;
-	case SYS_DSS:
-		/* FECM/Viterbi ON	*/
-		reg = stb0899_read_reg(state, STB0899_FECM);
-		STB0899_SETFIELD_VAL(FECM_RSVD0, reg, 1);
-		STB0899_SETFIELD_VAL(FECM_VITERBI_ON, reg, 1);
-		stb0899_write_reg(state, STB0899_FECM, reg);
-
-		stb0899_write_reg(state, STB0899_RSULC, 0xa1);
-		stb0899_write_reg(state, STB0899_TSULC, 0x61);
-		stb0899_write_reg(state, STB0899_RSLLC, 0x42);
-
-		reg = stb0899_read_reg(state, STB0899_TSTRES);
-		STB0899_SETFIELD_VAL(FRESLDPC, reg, 1);
-		stb0899_write_reg(state, STB0899_TSTRES, reg);
-
-		STB0899_SETFIELD_VAL(STOP_CHK8PSK, stop_clk[0], 1);
-		STB0899_SETFIELD_VAL(STOP_CKFEC108, stop_clk[0], 1);
-		STB0899_SETFIELD_VAL(STOP_CKFEC216, stop_clk[0], 1);
-
-		STB0899_SETFIELD_VAL(STOP_CKPKDLIN108, stop_clk[1], 1);
-		STB0899_SETFIELD_VAL(STOP_CKPKDLIN216, stop_clk[1], 1);
-
-		STB0899_SETFIELD_VAL(STOP_CKCORE216, stop_clk[0], 0);
-
-		STB0899_SETFIELD_VAL(STOP_CKS2DMD108, stop_clk[1], 1);
-		break;
-	default:
-		dprintk(state->verbose, FE_ERROR, 1, "Unsupported delivery system");
-		break;
-	}
-	STB0899_SETFIELD_VAL(STOP_CKADCI108, stop_clk[0], 0);
-	stb0899_write_regs(state, STB0899_STOPCLK1, stop_clk, 2);
-}
-
-/*
- * stb0899_set_iterations
- * set the LDPC iteration scale function
- */
-static void stb0899_set_iterations(struct stb0899_state *state)
-{
-	struct stb0899_internal *internal = &state->internal;
-	struct stb0899_config *config = state->config;
-
-	s32 iter_scale;
-	u32 reg;
-
-	iter_scale = 17 * (internal->master_clk / 1000);
-	iter_scale += 410000;
-	iter_scale /= (internal->srate / 1000000);
-	iter_scale /= 1000;
-
-	if (iter_scale > config->ldpc_max_iter)
-		iter_scale = config->ldpc_max_iter;
-
-	reg = STB0899_READ_S2REG(STB0899_S2FEC, MAX_ITER);
-	STB0899_SETFIELD_VAL(MAX_ITERATIONS, reg, iter_scale);
-	stb0899_write_s2reg(state, STB0899_S2FEC, STB0899_BASE_MAX_ITER, STB0899_OFF0_MAX_ITER, reg);
-}
-
-static enum dvbfe_search stb0899_search(struct dvb_frontend *fe)
-{
-	struct stb0899_state *state = fe->demodulator_priv;
-	struct stb0899_params *i_params = &state->params;
-	struct stb0899_internal *internal = &state->internal;
-	struct stb0899_config *config = state->config;
-	struct dtv_frontend_properties *props = &fe->dtv_property_cache;
-
-	u32 SearchRange, gain;
-
-	i_params->freq	= props->frequency;
-	i_params->srate = props->symbol_rate;
-	state->delsys = props->delivery_system;
-	dprintk(state->verbose, FE_DEBUG, 1, "delivery system=%d", state->delsys);
-
-	SearchRange = 10000000;
-	dprintk(state->verbose, FE_DEBUG, 1, "Frequency=%d, Srate=%d", i_params->freq, i_params->srate);
-	/* checking Search Range is meaningless for a fixed 3 Mhz			*/
-	if (INRANGE(i_params->srate, 1000000, 45000000)) {
-		dprintk(state->verbose, FE_DEBUG, 1, "Parameters IN RANGE");
-		stb0899_set_delivery(state);
-
-		if (state->config->tuner_set_rfsiggain) {
-			if (internal->srate > 15000000)
-				gain =  8; /* 15Mb < srate < 45Mb, gain = 8dB	*/
-			else if (internal->srate > 5000000)
-				gain = 12; /*  5Mb < srate < 15Mb, gain = 12dB	*/
-			else
-				gain = 14; /*  1Mb < srate <  5Mb, gain = 14db	*/
-			state->config->tuner_set_rfsiggain(fe, gain);
-		}
-
-		if (i_params->srate <= 5000000)
-			stb0899_set_mclk(state, config->lo_clk);
-		else
-			stb0899_set_mclk(state, config->hi_clk);
-
-		switch (state->delsys) {
-		case SYS_DVBS:
-		case SYS_DSS:
-			dprintk(state->verbose, FE_DEBUG, 1, "DVB-S delivery system");
-			internal->freq	= i_params->freq;
-			internal->srate	= i_params->srate;
-			/*
-			 * search = user search range +
-			 *	    500Khz +
-			 *	    2 * Tuner_step_size +
-			 *	    10% of the symbol rate
-			 */
-			internal->srch_range	= SearchRange + 1500000 + (i_params->srate / 5);
-			internal->derot_percent	= 30;
-
-			/* What to do for tuners having no bandwidth setup ?	*/
-			/* enable tuner I/O */
-			stb0899_i2c_gate_ctrl(&state->frontend, 1);
-
-			if (state->config->tuner_set_bandwidth)
-				state->config->tuner_set_bandwidth(fe, (13 * (stb0899_carr_width(state) + SearchRange)) / 10);
-			if (state->config->tuner_get_bandwidth)
-				state->config->tuner_get_bandwidth(fe, &internal->tuner_bw);
-
-			/* disable tuner I/O */
-			stb0899_i2c_gate_ctrl(&state->frontend, 0);
-
-			/* Set DVB-S1 AGC		*/
-			stb0899_write_reg(state, STB0899_AGCRFCFG, 0x11);
-
-			/* Run the search algorithm	*/
-			dprintk(state->verbose, FE_DEBUG, 1, "running DVB-S search algo ..");
-			if (stb0899_dvbs_algo(state)	== RANGEOK) {
-				internal->lock		= 1;
-				dprintk(state->verbose, FE_DEBUG, 1,
-					"-------------------------------------> DVB-S LOCK !");
-
-//				stb0899_write_reg(state, STB0899_ERRCTRL1, 0x3d); /* Viterbi Errors	*/
-//				internal->v_status = stb0899_read_reg(state, STB0899_VSTATUS);
-//				internal->err_ctrl = stb0899_read_reg(state, STB0899_ERRCTRL1);
-//				dprintk(state->verbose, FE_DEBUG, 1, "VSTATUS=0x%02x", internal->v_status);
-//				dprintk(state->verbose, FE_DEBUG, 1, "ERR_CTRL=0x%02x", internal->err_ctrl);
-
-				return DVBFE_ALGO_SEARCH_SUCCESS;
-			} else {
-				internal->lock		= 0;
-
-				return DVBFE_ALGO_SEARCH_FAILED;
-			}
-			break;
-		case SYS_DVBS2:
-			internal->freq			= i_params->freq;
-			internal->srate			= i_params->srate;
-			internal->srch_range		= SearchRange;
-
-			/* enable tuner I/O */
-			stb0899_i2c_gate_ctrl(&state->frontend, 1);
-
-			if (state->config->tuner_set_bandwidth)
-				state->config->tuner_set_bandwidth(fe, (stb0899_carr_width(state) + SearchRange));
-			if (state->config->tuner_get_bandwidth)
-				state->config->tuner_get_bandwidth(fe, &internal->tuner_bw);
-
-			/* disable tuner I/O */
-			stb0899_i2c_gate_ctrl(&state->frontend, 0);
-
-//			pParams->SpectralInv		= pSearch->IQ_Inversion;
-
-			/* Set DVB-S2 AGC		*/
-			stb0899_write_reg(state, STB0899_AGCRFCFG, 0x1c);
-
-			/* Set IterScale =f(MCLK,SYMB)	*/
-			stb0899_set_iterations(state);
-
-			/* Run the search algorithm	*/
-			dprintk(state->verbose, FE_DEBUG, 1, "running DVB-S2 search algo ..");
-			if (stb0899_dvbs2_algo(state)	== DVBS2_FEC_LOCK) {
-				internal->lock		= 1;
-				dprintk(state->verbose, FE_DEBUG, 1,
-					"-------------------------------------> DVB-S2 LOCK !");
-
-//				stb0899_write_reg(state, STB0899_ERRCTRL1, 0xb6); /* Packet Errors	*/
-//				internal->v_status = stb0899_read_reg(state, STB0899_VSTATUS);
-//				internal->err_ctrl = stb0899_read_reg(state, STB0899_ERRCTRL1);
-
-				return DVBFE_ALGO_SEARCH_SUCCESS;
-			} else {
-				internal->lock		= 0;
-
-				return DVBFE_ALGO_SEARCH_FAILED;
-			}
-			break;
-		default:
-			dprintk(state->verbose, FE_ERROR, 1, "Unsupported delivery system");
-			return DVBFE_ALGO_SEARCH_INVALID;
-		}
-	}
-
-	return DVBFE_ALGO_SEARCH_ERROR;
-}
-
-static int stb0899_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct stb0899_state *state		= fe->demodulator_priv;
-	struct stb0899_internal *internal	= &state->internal;
-
-	dprintk(state->verbose, FE_DEBUG, 1, "Get params");
-	p->symbol_rate = internal->srate;
-
-	return 0;
-}
-
-static enum dvbfe_algo stb0899_frontend_algo(struct dvb_frontend *fe)
-{
-	return DVBFE_ALGO_CUSTOM;
-}
-
-static struct dvb_frontend_ops stb0899_ops = {
-	.delsys = { SYS_DVBS, SYS_DVBS2, SYS_DSS },
-	.info = {
-		.name 			= "STB0899 Multistandard",
-		.frequency_min		= 950000,
-		.frequency_max 		= 2150000,
-		.frequency_stepsize	= 0,
-		.frequency_tolerance	= 0,
-		.symbol_rate_min 	=  5000000,
-		.symbol_rate_max 	= 45000000,
-
-		.caps 			= FE_CAN_INVERSION_AUTO	|
-					  FE_CAN_FEC_AUTO	|
-					  FE_CAN_2G_MODULATION	|
-					  FE_CAN_QPSK
-	},
-
-	.release			= stb0899_release,
-	.init				= stb0899_init,
-	.sleep				= stb0899_sleep,
-//	.wakeup				= stb0899_wakeup,
-
-	.i2c_gate_ctrl			= stb0899_i2c_gate_ctrl,
-
-	.get_frontend_algo		= stb0899_frontend_algo,
-	.search				= stb0899_search,
-	.get_frontend                   = stb0899_get_frontend,
-
-
-	.read_status			= stb0899_read_status,
-	.read_snr			= stb0899_read_snr,
-	.read_signal_strength		= stb0899_read_signal_strength,
-	.read_ber			= stb0899_read_ber,
-
-	.set_voltage			= stb0899_set_voltage,
-	.set_tone			= stb0899_set_tone,
-
-	.diseqc_send_master_cmd		= stb0899_send_diseqc_msg,
-	.diseqc_recv_slave_reply	= stb0899_recv_slave_reply,
-	.diseqc_send_burst		= stb0899_send_diseqc_burst,
-};
-
-struct dvb_frontend *stb0899_attach(struct stb0899_config *config, struct i2c_adapter *i2c)
-{
-	struct stb0899_state *state = NULL;
-	enum stb0899_inversion inversion;
-
-	state = kzalloc(sizeof (struct stb0899_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	inversion				= config->inversion;
-	state->verbose				= &verbose;
-	state->config				= config;
-	state->i2c				= i2c;
-	state->frontend.ops			= stb0899_ops;
-	state->frontend.demodulator_priv	= state;
-	state->internal.inversion		= inversion;
-
-	stb0899_wakeup(&state->frontend);
-	if (stb0899_get_dev_id(state) == -ENODEV) {
-		printk("%s: Exiting .. !\n", __func__);
-		goto error;
-	}
-
-	printk("%s: Attaching STB0899 \n", __func__);
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(stb0899_attach);
-MODULE_PARM_DESC(verbose, "Set Verbosity level");
-MODULE_AUTHOR("Manu Abraham");
-MODULE_DESCRIPTION("STB0899 Multi-Std frontend");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/stb0899_drv.h b/drivers/media/dvb/frontends/stb0899_drv.h
deleted file mode 100644
index 98b200c..0000000
--- a/drivers/media/dvb/frontends/stb0899_drv.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
-	STB0899 Multistandard Frontend driver
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	Copyright (C) ST Microelectronics
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __STB0899_DRV_H
-#define __STB0899_DRV_H
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include "dvb_frontend.h"
-
-#define STB0899_TSMODE_SERIAL		1
-#define STB0899_CLKPOL_FALLING		2
-#define STB0899_CLKNULL_PARITY		3
-#define STB0899_SYNC_FORCED		4
-#define STB0899_FECMODE_DSS		5
-
-struct stb0899_s1_reg {
-	u16	address;
-	u8	data;
-};
-
-struct stb0899_s2_reg {
-	u16	offset;
-	u32	base_address;
-	u32	data;
-};
-
-enum stb0899_inversion {
-	IQ_SWAP_OFF	= 0,
-	IQ_SWAP_ON,
-	IQ_SWAP_AUTO
-};
-
-#define STB0899_GPIO00				0xf140
-#define STB0899_GPIO01				0xf141
-#define STB0899_GPIO02				0xf142
-#define STB0899_GPIO03				0xf143
-#define STB0899_GPIO04				0xf144
-#define STB0899_GPIO05				0xf145
-#define STB0899_GPIO06				0xf146
-#define STB0899_GPIO07				0xf147
-#define STB0899_GPIO08				0xf148
-#define STB0899_GPIO09				0xf149
-#define STB0899_GPIO10				0xf14a
-#define STB0899_GPIO11				0xf14b
-#define STB0899_GPIO12				0xf14c
-#define STB0899_GPIO13				0xf14d
-#define STB0899_GPIO14				0xf14e
-#define STB0899_GPIO15				0xf14f
-#define STB0899_GPIO16				0xf150
-#define STB0899_GPIO17				0xf151
-#define STB0899_GPIO18				0xf152
-#define STB0899_GPIO19				0xf153
-#define STB0899_GPIO20				0xf154
-
-#define STB0899_GPIOPULLUP			0x01 /* Output device is connected to Vdd */
-#define STB0899_GPIOPULLDN			0x00 /* Output device is connected to Vss */
-
-#define STB0899_POSTPROC_GPIO_POWER		0x00
-#define STB0899_POSTPROC_GPIO_LOCK		0x01
-
-/*
- * Post process output configuration control
- * 1. POWER ON/OFF		(index 0)
- * 2. FE_HAS_LOCK/LOCK_LOSS	(index 1)
- *
- * @gpio 	= one of the above listed GPIO's
- * @level	= output state: pulled up or low
- */
-struct stb0899_postproc {
-	u16	gpio;
-	u8	level;
-};
-
-struct stb0899_config {
-	const struct stb0899_s1_reg	*init_dev;
-	const struct stb0899_s2_reg	*init_s2_demod;
-	const struct stb0899_s1_reg	*init_s1_demod;
-	const struct stb0899_s2_reg	*init_s2_fec;
-	const struct stb0899_s1_reg	*init_tst;
-
-	const struct stb0899_postproc	*postproc;
-
-	enum stb0899_inversion		inversion;
-
-	u32	xtal_freq;
-
-	u8	demod_address;
-	u8	ts_output_mode;
-	u8	block_sync_mode;
-	u8	ts_pfbit_toggle;
-
-	u8	clock_polarity;
-	u8	data_clk_parity;
-	u8	fec_mode;
-	u8	data_output_ctl;
-	u8	data_fifo_mode;
-	u8	out_rate_comp;
-	u8	i2c_repeater;
-//	int	inversion;
-	int	lo_clk;
-	int	hi_clk;
-
-	u32	esno_ave;
-	u32	esno_quant;
-	u32	avframes_coarse;
-	u32	avframes_fine;
-	u32	miss_threshold;
-	u32	uwp_threshold_acq;
-	u32	uwp_threshold_track;
-	u32	uwp_threshold_sof;
-	u32	sof_search_timeout;
-
-	u32	btr_nco_bits;
-	u32	btr_gain_shift_offset;
-	u32	crl_nco_bits;
-	u32	ldpc_max_iter;
-
-	int (*tuner_set_frequency)(struct dvb_frontend *fe, u32 frequency);
-	int (*tuner_get_frequency)(struct dvb_frontend *fe, u32 *frequency);
-	int (*tuner_set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth);
-	int (*tuner_get_bandwidth)(struct dvb_frontend *fe, u32 *bandwidth);
-	int (*tuner_set_rfsiggain)(struct dvb_frontend *fe, u32 rf_gain);
-};
-
-#if defined(CONFIG_DVB_STB0899) || (defined(CONFIG_DVB_STB0899_MODULE) && defined(MODULE))
-
-extern struct dvb_frontend *stb0899_attach(struct stb0899_config *config,
-					   struct i2c_adapter *i2c);
-
-#else
-
-static inline struct dvb_frontend *stb0899_attach(struct stb0899_config *config,
-						  struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-#endif //CONFIG_DVB_STB0899
-
-
-#endif
diff --git a/drivers/media/dvb/frontends/stb0899_priv.h b/drivers/media/dvb/frontends/stb0899_priv.h
deleted file mode 100644
index 82395b9..0000000
--- a/drivers/media/dvb/frontends/stb0899_priv.h
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
-	STB0899 Multistandard Frontend driver
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	Copyright (C) ST Microelectronics
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __STB0899_PRIV_H
-#define __STB0899_PRIV_H
-
-#include "dvb_frontend.h"
-#include "stb0899_drv.h"
-
-#define FE_ERROR				0
-#define FE_NOTICE				1
-#define FE_INFO					2
-#define FE_DEBUG				3
-#define FE_DEBUGREG				4
-
-#define dprintk(x, y, z, format, arg...) do {						\
-	if (z) {									\
-		if	((*x > FE_ERROR) && (*x > y))					\
-			printk(KERN_ERR "%s: " format "\n", __func__ , ##arg);		\
-		else if	((*x > FE_NOTICE) && (*x > y))					\
-			printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg);	\
-		else if ((*x > FE_INFO) && (*x > y))					\
-			printk(KERN_INFO "%s: " format "\n", __func__ , ##arg);		\
-		else if ((*x > FE_DEBUG) && (*x > y))					\
-			printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg);	\
-	} else {									\
-		if (*x > y)								\
-			printk(format, ##arg);						\
-	}										\
-} while(0)
-
-#define INRANGE(val, x, y)			(((x <= val) && (val <= y)) ||		\
-						 ((y <= val) && (val <= x)) ? 1 : 0)
-
-#define BYTE0					0
-#define BYTE1					8
-#define BYTE2					16
-#define BYTE3					24
-
-#define GETBYTE(x, y)				(((x) >> (y)) & 0xff)
-#define MAKEWORD32(a, b, c, d)			(((a) << 24) | ((b) << 16) | ((c) << 8) | (d))
-#define MAKEWORD16(a, b)			(((a) << 8) | (b))
-
-#define LSB(x)					((x & 0xff))
-#define MSB(y)					((y >> 8) & 0xff)
-
-
-#define STB0899_GETFIELD(bitf, val)		((val >> STB0899_OFFST_##bitf) & ((1 << STB0899_WIDTH_##bitf) - 1))
-
-
-#define STB0899_SETFIELD(mask, val, width, offset)      (mask & (~(((1 << width) - 1) <<	\
-							 offset))) | ((val &			\
-							 ((1 << width) - 1)) << offset)
-
-#define STB0899_SETFIELD_VAL(bitf, mask, val)	(mask = (mask & (~(((1 << STB0899_WIDTH_##bitf) - 1) <<\
-							 STB0899_OFFST_##bitf))) | \
-							 (val << STB0899_OFFST_##bitf))
-
-
-enum stb0899_status {
-	NOAGC1	= 0,
-	AGC1OK,
-	NOTIMING,
-	ANALOGCARRIER,
-	TIMINGOK,
-	NOAGC2,
-	AGC2OK,
-	NOCARRIER,
-	CARRIEROK,
-	NODATA,
-	FALSELOCK,
-	DATAOK,
-	OUTOFRANGE,
-	RANGEOK,
-	DVBS2_DEMOD_LOCK,
-	DVBS2_DEMOD_NOLOCK,
-	DVBS2_FEC_LOCK,
-	DVBS2_FEC_NOLOCK
-};
-
-enum stb0899_modcod {
-	STB0899_DUMMY_PLF,
-	STB0899_QPSK_14,
-	STB0899_QPSK_13,
-	STB0899_QPSK_25,
-	STB0899_QPSK_12,
-	STB0899_QPSK_35,
-	STB0899_QPSK_23,
-	STB0899_QPSK_34,
-	STB0899_QPSK_45,
-	STB0899_QPSK_56,
-	STB0899_QPSK_89,
-	STB0899_QPSK_910,
-	STB0899_8PSK_35,
-	STB0899_8PSK_23,
-	STB0899_8PSK_34,
-	STB0899_8PSK_56,
-	STB0899_8PSK_89,
-	STB0899_8PSK_910,
-	STB0899_16APSK_23,
-	STB0899_16APSK_34,
-	STB0899_16APSK_45,
-	STB0899_16APSK_56,
-	STB0899_16APSK_89,
-	STB0899_16APSK_910,
-	STB0899_32APSK_34,
-	STB0899_32APSK_45,
-	STB0899_32APSK_56,
-	STB0899_32APSK_89,
-	STB0899_32APSK_910
-};
-
-enum stb0899_frame {
-	STB0899_LONG_FRAME,
-	STB0899_SHORT_FRAME
-};
-
-enum stb0899_alpha {
-	RRC_20,
-	RRC_25,
-	RRC_35
-};
-
-struct stb0899_tab {
-	s32 real;
-	s32 read;
-};
-
-enum stb0899_fec {
-	STB0899_FEC_1_2			= 13,
-	STB0899_FEC_2_3			= 18,
-	STB0899_FEC_3_4			= 21,
-	STB0899_FEC_5_6			= 24,
-	STB0899_FEC_6_7			= 25,
-	STB0899_FEC_7_8			= 26
-};
-
-struct stb0899_params {
-	u32	freq;					/* Frequency	*/
-	u32	srate;					/* Symbol rate	*/
-	enum fe_code_rate fecrate;
-};
-
-struct stb0899_internal {
-	u32			master_clk;
-	u32			freq;			/* Demod internal Frequency		*/
-	u32			srate;			/* Demod internal Symbol rate		*/
-	enum stb0899_fec	fecrate;		/* Demod internal FEC rate		*/
-	s32			srch_range;		/* Demod internal Search Range		*/
-	s32			sub_range;		/* Demod current sub range (Hz)		*/
-	s32			tuner_step;		/* Tuner step (Hz)			*/
-	s32			tuner_offst;		/* Relative offset to carrier (Hz)	*/
-	u32			tuner_bw;		/* Current bandwidth of the tuner (Hz)	*/
-
-	s32			mclk;			/* Masterclock Divider factor (binary)	*/
-	s32			rolloff;		/* Current RollOff of the filter (x100)	*/
-
-	s16			derot_freq;		/* Current derotator frequency (Hz)	*/
-	s16			derot_percent;
-
-	s16			direction;		/* Current derotator search direction	*/
-	s16			derot_step;		/* Derotator step (binary value)	*/
-	s16			t_derot;		/* Derotator time constant (ms)		*/
-	s16			t_data;			/* Data recovery time constant (ms)	*/
-	s16			sub_dir;		/* Direction of the next sub range	*/
-
-	s16			t_agc1;			/* Agc1 time constant (ms)		*/
-	s16			t_agc2;			/* Agc2 time constant (ms)		*/
-
-	u32			lock;			/* Demod internal lock state		*/
-	enum stb0899_status	status;			/* Demod internal status		*/
-
-	/* DVB-S2 */
-	s32			agc_gain;		/* RF AGC Gain				*/
-	s32			center_freq;		/* Nominal carrier frequency		*/
-	s32			av_frame_coarse;	/* Coarse carrier freq search frames	*/
-	s32			av_frame_fine;		/* Fine carrier freq search frames	*/
-
-	s16			step_size;		/* Carrier frequency search step size	*/
-
-	enum stb0899_alpha	rrc_alpha;
-	enum stb0899_inversion	inversion;
-	enum stb0899_modcod	modcod;
-	u8			pilots;			/* Pilots found				*/
-
-	enum stb0899_frame	frame_length;
-	u8			v_status;		/* VSTATUS				*/
-	u8			err_ctrl;		/* ERRCTRLn				*/
-};
-
-struct stb0899_state {
-	struct i2c_adapter		*i2c;
-	struct stb0899_config		*config;
-	struct dvb_frontend		frontend;
-
-	u32				*verbose;	/* Cached module verbosity level	*/
-
-	struct stb0899_internal		internal;	/* Device internal parameters		*/
-
-	/*	cached params from API	*/
-	enum fe_delivery_system		delsys;
-	struct stb0899_params		params;
-
-	u32				rx_freq;	/* DiSEqC 2.0 receiver freq		*/
-	struct mutex			search_lock;
-};
-/* stb0899.c		*/
-extern int stb0899_read_reg(struct stb0899_state *state,
-			    unsigned int reg);
-
-extern u32 _stb0899_read_s2reg(struct stb0899_state *state,
-			       u32 stb0899_i2cdev,
-			       u32 stb0899_base_addr,
-			       u16 stb0899_reg_offset);
-
-extern int stb0899_read_regs(struct stb0899_state *state,
-			     unsigned int reg, u8 *buf,
-			     u32 count);
-
-extern int stb0899_write_regs(struct stb0899_state *state,
-			      unsigned int reg, u8 *data,
-			      u32 count);
-
-extern int stb0899_write_reg(struct stb0899_state *state,
-			     unsigned int reg,
-			     u8 data);
-
-extern int stb0899_write_s2reg(struct stb0899_state *state,
-			       u32 stb0899_i2cdev,
-			       u32 stb0899_base_addr,
-			       u16 stb0899_reg_offset,
-			       u32 stb0899_data);
-
-extern int stb0899_i2c_gate_ctrl(struct dvb_frontend *fe, int enable);
-
-
-#define STB0899_READ_S2REG(DEVICE, REG) 	(_stb0899_read_s2reg(state, DEVICE, STB0899_BASE_##REG, STB0899_OFF0_##REG))
-//#define STB0899_WRITE_S2REG(DEVICE, REG, DATA)	(_stb0899_write_s2reg(state, DEVICE, STB0899_BASE_##REG, STB0899_OFF0_##REG, DATA))
-
-/* stb0899_algo.c	*/
-extern enum stb0899_status stb0899_dvbs_algo(struct stb0899_state *state);
-extern enum stb0899_status stb0899_dvbs2_algo(struct stb0899_state *state);
-extern long stb0899_carr_width(struct stb0899_state *state);
-
-#endif //__STB0899_PRIV_H
diff --git a/drivers/media/dvb/frontends/stb0899_reg.h b/drivers/media/dvb/frontends/stb0899_reg.h
deleted file mode 100644
index ba1ed56..0000000
--- a/drivers/media/dvb/frontends/stb0899_reg.h
+++ /dev/null
@@ -1,2027 +0,0 @@
-/*
-	STB0899 Multistandard Frontend driver
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	Copyright (C) ST Microelectronics
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __STB0899_REG_H
-#define __STB0899_REG_H
-
-/*	S1	*/
-#define STB0899_DEV_ID				0xf000
-#define STB0899_CHIP_ID				(0x0f << 4)
-#define STB0899_OFFST_CHIP_ID			4
-#define STB0899_WIDTH_CHIP_ID			4
-#define STB0899_CHIP_REL			(0x0f << 0)
-#define STB0899_OFFST_CHIP_REL			0
-#define STB0899_WIDTH_CHIP_REL			4
-
-#define STB0899_DEMOD				0xf40e
-#define STB0899_MODECOEFF			(0x01 << 0)
-#define STB0899_OFFST_MODECOEFF			0
-#define STB0899_WIDTH_MODECOEFF			1
-
-#define STB0899_RCOMPC				0xf410
-#define STB0899_AGC1CN				0xf412
-#define STB0899_AGC1REF				0xf413
-#define STB0899_RTC				0xf417
-#define STB0899_TMGCFG				0xf418
-#define STB0899_AGC2REF				0xf419
-#define STB0899_TLSR				0xf41a
-
-#define STB0899_CFD				0xf41b
-#define STB0899_CFD_ON				(0x01 << 7)
-#define STB0899_OFFST_CFD_ON			7
-#define STB0899_WIDTH_CFD_ON			1
-
-#define STB0899_ACLC				0xf41c
-
-#define STB0899_BCLC				0xf41d
-#define STB0899_OFFST_ALGO			6
-#define STB0899_WIDTH_ALGO_QPSK2		2
-#define STB0899_ALGO_QPSK2			(2 << 6)
-#define STB0899_ALGO_QPSK1			(1 << 6)
-#define STB0899_ALGO_BPSK			(0 << 6)
-#define STB0899_OFFST_BETA			0
-#define STB0899_WIDTH_BETA			6
-
-#define STB0899_EQON				0xf41e
-#define STB0899_LDT				0xf41f
-#define STB0899_LDT2				0xf420
-#define STB0899_EQUALREF			0xf425
-#define STB0899_TMGRAMP				0xf426
-#define STB0899_TMGTHD				0xf427
-#define STB0899_IDCCOMP				0xf428
-#define STB0899_QDCCOMP				0xf429
-#define STB0899_POWERI				0xf42a
-#define STB0899_POWERQ				0xf42b
-#define STB0899_RCOMP				0xf42c
-
-#define STB0899_AGCIQIN				0xf42e
-#define STB0899_AGCIQVALUE			(0xff << 0)
-#define STB0899_OFFST_AGCIQVALUE		0
-#define STB0899_WIDTH_AGCIQVALUE		8
-
-#define STB0899_AGC2I1				0xf436
-#define STB0899_AGC2I2				0xf437
-
-#define STB0899_TLIR				0xf438
-#define STB0899_TLIR_TMG_LOCK_IND		(0xff << 0)
-#define STB0899_OFFST_TLIR_TMG_LOCK_IND		0
-#define STB0899_WIDTH_TLIR_TMG_LOCK_IND		8
-
-#define STB0899_RTF				0xf439
-#define STB0899_RTF_TIMING_LOOP_FREQ		(0xff << 0)
-#define STB0899_OFFST_RTF_TIMING_LOOP_FREQ	0
-#define STB0899_WIDTH_RTF_TIMING_LOOP_FREQ	8
-
-#define STB0899_DSTATUS				0xf43a
-#define STB0899_CARRIER_FOUND			(0x01 << 7)
-#define STB0899_OFFST_CARRIER_FOUND		7
-#define STB0899_WIDTH_CARRIER_FOUND		1
-#define STB0899_TMG_LOCK			(0x01 << 6)
-#define STB0899_OFFST_TMG_LOCK			6
-#define STB0899_WIDTH_TMG_LOCK			1
-#define STB0899_DEMOD_LOCK			(0x01 << 5)
-#define STB0899_OFFST_DEMOD_LOCK		5
-#define STB0899_WIDTH_DEMOD_LOCK		1
-#define STB0899_TMG_AUTO			(0x01 << 4)
-#define STB0899_OFFST_TMG_AUTO			4
-#define STB0899_WIDTH_TMG_AUTO			1
-#define STB0899_END_MAIN			(0x01 << 3)
-#define STB0899_OFFST_END_MAIN			3
-#define STB0899_WIDTH_END_MAIN			1
-
-#define STB0899_LDI				0xf43b
-#define STB0899_OFFST_LDI			0
-#define STB0899_WIDTH_LDI			8
-
-#define STB0899_CFRM				0xf43e
-#define STB0899_OFFST_CFRM			0
-#define STB0899_WIDTH_CFRM			8
-
-#define STB0899_CFRL				0xf43f
-#define STB0899_OFFST_CFRL			0
-#define STB0899_WIDTH_CFRL			8
-
-#define STB0899_NIRM				0xf440
-#define STB0899_OFFST_NIRM			0
-#define STB0899_WIDTH_NIRM			8
-
-#define STB0899_NIRL				0xf441
-#define STB0899_OFFST_NIRL			0
-#define STB0899_WIDTH_NIRL			8
-
-#define STB0899_ISYMB				0xf444
-#define STB0899_QSYMB				0xf445
-
-#define STB0899_SFRH				0xf446
-#define STB0899_OFFST_SFRH			0
-#define STB0899_WIDTH_SFRH			8
-
-#define STB0899_SFRM				0xf447
-#define STB0899_OFFST_SFRM			0
-#define STB0899_WIDTH_SFRM			8
-
-#define STB0899_SFRL				0xf448
-#define STB0899_OFFST_SFRL			4
-#define STB0899_WIDTH_SFRL			4
-
-#define STB0899_SFRUPH				0xf44c
-#define STB0899_SFRUPM				0xf44d
-#define STB0899_SFRUPL				0xf44e
-
-#define STB0899_EQUAI1				0xf4e0
-#define STB0899_EQUAQ1				0xf4e1
-#define STB0899_EQUAI2				0xf4e2
-#define STB0899_EQUAQ2				0xf4e3
-#define STB0899_EQUAI3				0xf4e4
-#define STB0899_EQUAQ3				0xf4e5
-#define STB0899_EQUAI4				0xf4e6
-#define STB0899_EQUAQ4				0xf4e7
-#define STB0899_EQUAI5				0xf4e8
-#define STB0899_EQUAQ5				0xf4e9
-
-#define STB0899_DSTATUS2			0xf50c
-#define STB0899_DS2_TMG_AUTOSRCH		(0x01 << 7)
-#define STB8999_OFFST_DS2_TMG_AUTOSRCH		7
-#define STB0899_WIDTH_DS2_TMG_AUTOSRCH		1
-#define STB0899_DS2_END_MAINLOOP		(0x01 << 6)
-#define STB0899_OFFST_DS2_END_MAINLOOP		6
-#define STB0899_WIDTH_DS2_END_MAINLOOP		1
-#define STB0899_DS2_CFSYNC			(0x01 << 5)
-#define STB0899_OFFST_DS2_CFSYNC		5
-#define STB0899_WIDTH_DS2_CFSYNC		1
-#define STB0899_DS2_TMGLOCK			(0x01 << 4)
-#define STB0899_OFFST_DS2_TMGLOCK		4
-#define STB0899_WIDTH_DS2_TMGLOCK		1
-#define STB0899_DS2_DEMODWAIT			(0x01 << 3)
-#define STB0899_OFFST_DS2_DEMODWAIT		3
-#define STB0899_WIDTH_DS2_DEMODWAIT		1
-#define STB0899_DS2_FECON			(0x01 << 1)
-#define STB0899_OFFST_DS2_FECON			1
-#define STB0899_WIDTH_DS2_FECON			1
-
-/*	S1 FEC	*/
-#define STB0899_VSTATUS				0xf50d
-#define STB0899_VSTATUS_VITERBI_ON		(0x01 << 7)
-#define STB0899_OFFST_VSTATUS_VITERBI_ON	7
-#define STB0899_WIDTH_VSTATUS_VITERBI_ON	1
-#define STB0899_VSTATUS_END_LOOPVIT		(0x01 << 6)
-#define STB0899_OFFST_VSTATUS_END_LOOPVIT	6
-#define STB0899_WIDTH_VSTATUS_END_LOOPVIT	1
-#define STB0899_VSTATUS_PRFVIT			(0x01 << 4)
-#define STB0899_OFFST_VSTATUS_PRFVIT		4
-#define STB0899_WIDTH_VSTATUS_PRFVIT		1
-#define STB0899_VSTATUS_LOCKEDVIT		(0x01 << 3)
-#define STB0899_OFFST_VSTATUS_LOCKEDVIT		3
-#define STB0899_WIDTH_VSTATUS_LOCKEDVIT		1
-
-#define STB0899_VERROR				0xf50f
-
-#define STB0899_IQSWAP				0xf523
-#define STB0899_SYM				(0x01 << 3)
-#define STB0899_OFFST_SYM			3
-#define STB0899_WIDTH_SYM			1
-
-#define STB0899_FECAUTO1			0xf530
-#define STB0899_DSSSRCH				(0x01 << 3)
-#define STB0899_OFFST_DSSSRCH			3
-#define STB0899_WIDTH_DSSSRCH			1
-#define STB0899_SYMSRCH				(0x01 << 2)
-#define STB0899_OFFST_SYMSRCH			2
-#define STB0899_WIDTH_SYMSRCH			1
-#define STB0899_QPSKSRCH			(0x01 << 1)
-#define STB0899_OFFST_QPSKSRCH			1
-#define STB0899_WIDTH_QPSKSRCH			1
-#define STB0899_BPSKSRCH			(0x01 << 0)
-#define STB0899_OFFST_BPSKSRCH			0
-#define STB0899_WIDTH_BPSKSRCH			1
-
-#define STB0899_FECM				0xf533
-#define STB0899_FECM_NOT_DVB			(0x01 << 7)
-#define STB0899_OFFST_FECM_NOT_DVB		7
-#define STB0899_WIDTH_FECM_NOT_DVB		1
-#define STB0899_FECM_RSVD1			(0x07 << 4)
-#define STB0899_OFFST_FECM_RSVD1		4
-#define STB0899_WIDTH_FECM_RSVD1		3
-#define STB0899_FECM_VITERBI_ON			(0x01 << 3)
-#define STB0899_OFFST_FECM_VITERBI_ON		3
-#define STB0899_WIDTH_FECM_VITERBI_ON		1
-#define STB0899_FECM_RSVD0			(0x01 << 2)
-#define STB0899_OFFST_FECM_RSVD0		2
-#define STB0899_WIDTH_FECM_RSVD0		1
-#define STB0899_FECM_SYNCDIS			(0x01 << 1)
-#define STB0899_OFFST_FECM_SYNCDIS		1
-#define STB0899_WIDTH_FECM_SYNCDIS		1
-#define STB0899_FECM_SYMI			(0x01 << 0)
-#define STB0899_OFFST_FECM_SYMI			0
-#define STB0899_WIDTH_FECM_SYMI			1
-
-#define STB0899_VTH12				0xf534
-#define STB0899_VTH23				0xf535
-#define STB0899_VTH34				0xf536
-#define STB0899_VTH56				0xf537
-#define STB0899_VTH67				0xf538
-#define STB0899_VTH78				0xf539
-
-#define STB0899_PRVIT				0xf53c
-#define STB0899_PR_7_8				(0x01 << 5)
-#define STB0899_OFFST_PR_7_8			5
-#define STB0899_WIDTH_PR_7_8			1
-#define STB0899_PR_6_7				(0x01 << 4)
-#define STB0899_OFFST_PR_6_7			4
-#define STB0899_WIDTH_PR_6_7			1
-#define STB0899_PR_5_6				(0x01 << 3)
-#define STB0899_OFFST_PR_5_6			3
-#define STB0899_WIDTH_PR_5_6			1
-#define STB0899_PR_3_4				(0x01 << 2)
-#define STB0899_OFFST_PR_3_4			2
-#define STB0899_WIDTH_PR_3_4			1
-#define STB0899_PR_2_3				(0x01 << 1)
-#define STB0899_OFFST_PR_2_3			1
-#define STB0899_WIDTH_PR_2_3			1
-#define STB0899_PR_1_2				(0x01 << 0)
-#define STB0899_OFFST_PR_1_2			0
-#define STB0899_WIDTH_PR_1_2			1
-
-#define STB0899_VITSYNC				0xf53d
-#define STB0899_AM				(0x01 << 7)
-#define STB0899_OFFST_AM			7
-#define STB0899_WIDTH_AM			1
-#define STB0899_FREEZE				(0x01 << 6)
-#define STB0899_OFFST_FREEZE			6
-#define STB0899_WIDTH_FREEZE			1
-#define STB0899_SN_65536			(0x03 << 4)
-#define STB0899_OFFST_SN_65536			4
-#define STB0899_WIDTH_SN_65536			2
-#define STB0899_SN_16384			(0x01 << 5)
-#define STB0899_OFFST_SN_16384			5
-#define STB0899_WIDTH_SN_16384			1
-#define STB0899_SN_4096				(0x01 << 4)
-#define STB0899_OFFST_SN_4096			4
-#define STB0899_WIDTH_SN_4096			1
-#define STB0899_SN_1024				(0x00 << 4)
-#define STB0899_OFFST_SN_1024			4
-#define STB0899_WIDTH_SN_1024			0
-#define STB0899_TO_128				(0x03 << 2)
-#define STB0899_OFFST_TO_128			2
-#define STB0899_WIDTH_TO_128			2
-#define STB0899_TO_64				(0x01 << 3)
-#define STB0899_OFFST_TO_64			3
-#define STB0899_WIDTH_TO_64			1
-#define STB0899_TO_32				(0x01 << 2)
-#define STB0899_OFFST_TO_32			2
-#define STB0899_WIDTH_TO_32			1
-#define STB0899_TO_16				(0x00 << 2)
-#define STB0899_OFFST_TO_16			2
-#define STB0899_WIDTH_TO_16			0
-#define STB0899_HYST_128			(0x03 << 1)
-#define STB0899_OFFST_HYST_128			1
-#define STB0899_WIDTH_HYST_128			2
-#define STB0899_HYST_64				(0x01 << 1)
-#define STB0899_OFFST_HYST_64			1
-#define STB0899_WIDTH_HYST_64			1
-#define STB0899_HYST_32				(0x01 << 0)
-#define STB0899_OFFST_HYST_32			0
-#define STB0899_WIDTH_HYST_32			1
-#define STB0899_HYST_16				(0x00 << 0)
-#define STB0899_OFFST_HYST_16			0
-#define STB0899_WIDTH_HYST_16			0
-
-#define STB0899_RSULC				0xf548
-#define STB0899_ULDIL_ON			(0x01 << 7)
-#define STB0899_OFFST_ULDIL_ON			7
-#define STB0899_WIDTH_ULDIL_ON			1
-#define STB0899_ULAUTO_ON			(0x01 << 6)
-#define STB0899_OFFST_ULAUTO_ON			6
-#define STB0899_WIDTH_ULAUTO_ON			1
-#define STB0899_ULRS_ON				(0x01 << 5)
-#define STB0899_OFFST_ULRS_ON			5
-#define STB0899_WIDTH_ULRS_ON			1
-#define STB0899_ULDESCRAM_ON			(0x01 << 4)
-#define STB0899_OFFST_ULDESCRAM_ON		4
-#define STB0899_WIDTH_ULDESCRAM_ON		1
-#define STB0899_UL_DISABLE			(0x01 << 2)
-#define STB0899_OFFST_UL_DISABLE		2
-#define STB0899_WIDTH_UL_DISABLE		1
-#define STB0899_NOFTHRESHOLD			(0x01 << 0)
-#define STB0899_OFFST_NOFTHRESHOLD		0
-#define STB0899_WIDTH_NOFTHRESHOLD		1
-
-#define STB0899_RSLLC				0xf54a
-#define STB0899_DEMAPVIT			0xf583
-#define STB0899_DEMAPVIT_RSVD			(0x01 << 7)
-#define STB0899_OFFST_DEMAPVIT_RSVD		7
-#define STB0899_WIDTH_DEMAPVIT_RSVD		1
-#define STB0899_DEMAPVIT_KDIVIDER		(0x7f << 0)
-#define STB0899_OFFST_DEMAPVIT_KDIVIDER		0
-#define STB0899_WIDTH_DEMAPVIT_KDIVIDER		7
-
-#define STB0899_PLPARM				0xf58c
-#define STB0899_VITMAPPING			(0x07 << 5)
-#define STB0899_OFFST_VITMAPPING		5
-#define STB0899_WIDTH_VITMAPPING		3
-#define STB0899_VITMAPPING_BPSK			(0x01 << 5)
-#define STB0899_OFFST_VITMAPPING_BPSK		5
-#define STB0899_WIDTH_VITMAPPING_BPSK		1
-#define STB0899_VITMAPPING_QPSK			(0x00 << 5)
-#define STB0899_OFFST_VITMAPPING_QPSK		5
-#define STB0899_WIDTH_VITMAPPING_QPSK		0
-#define STB0899_VITCURPUN			(0x1f << 0)
-#define STB0899_OFFST_VITCURPUN			0
-#define STB0899_WIDTH_VITCURPUN			5
-#define STB0899_VITCURPUN_1_2			(0x0d << 0)
-#define STB0899_VITCURPUN_2_3			(0x12 << 0)
-#define STB0899_VITCURPUN_3_4			(0x15 << 0)
-#define STB0899_VITCURPUN_5_6			(0x18 << 0)
-#define STB0899_VITCURPUN_6_7			(0x19 << 0)
-#define STB0899_VITCURPUN_7_8			(0x1a << 0)
-
-/*	S2 DEMOD	*/
-#define STB0899_OFF0_DMD_STATUS			0xf300
-#define STB0899_BASE_DMD_STATUS			0x00000000
-#define STB0899_IF_AGC_LOCK			(0x01 << 8)
-#define STB0899_OFFST_IF_AGC_LOCK		0
-#define STB0899_WIDTH_IF_AGC_LOCK		1
-
-#define STB0899_OFF0_CRL_FREQ			0xf304
-#define STB0899_BASE_CRL_FREQ			0x00000000
-#define STB0899_CARR_FREQ			(0x3fffffff << 0)
-#define STB0899_OFFST_CARR_FREQ			0
-#define STB0899_WIDTH_CARR_FREQ			30
-
-#define STB0899_OFF0_BTR_FREQ			0xf308
-#define STB0899_BASE_BTR_FREQ			0x00000000
-#define STB0899_BTR_FREQ			(0xfffffff << 0)
-#define STB0899_OFFST_BTR_FREQ			0
-#define STB0899_WIDTH_BTR_FREQ			28
-
-#define STB0899_OFF0_IF_AGC_GAIN		0xf30c
-#define STB0899_BASE_IF_AGC_GAIN		0x00000000
-#define STB0899_IF_AGC_GAIN			(0x3fff < 0)
-#define STB0899_OFFST_IF_AGC_GAIN		0
-#define STB0899_WIDTH_IF_AGC_GAIN		14
-
-#define STB0899_OFF0_BB_AGC_GAIN		0xf310
-#define STB0899_BASE_BB_AGC_GAIN		0x00000000
-#define STB0899_BB_AGC_GAIN			(0x3fff < 0)
-#define STB0899_OFFST_BB_AGC_GAIN		0
-#define STB0899_WIDTH_BB_AGC_GAIN		14
-
-#define STB0899_OFF0_DC_OFFSET			0xf314
-#define STB0899_BASE_DC_OFFSET			0x00000000
-#define STB0899_I				(0xff < 8)
-#define STB0899_OFFST_I				8
-#define STB0899_WIDTH_I				8
-#define STB0899_Q				(0xff < 0)
-#define STB0899_OFFST_Q				8
-#define STB0899_WIDTH_Q				8
-
-#define STB0899_OFF0_DMD_CNTRL			0xf31c
-#define STB0899_BASE_DMD_CNTRL			0x00000000
-#define STB0899_ADC0_PINS1IN			(0x01 << 6)
-#define STB0899_OFFST_ADC0_PINS1IN              6
-#define STB0899_WIDTH_ADC0_PINS1IN              1
-#define STB0899_IN2COMP1_OFFBIN0		(0x01 << 3)
-#define STB0899_OFFST_IN2COMP1_OFFBIN0          3
-#define STB0899_WIDTH_IN2COMP1_OFFBIN0          1
-#define STB0899_DC_COMP				(0x01 << 2)
-#define STB0899_OFFST_DC_COMP			2
-#define STB0899_WIDTH_DC_COMP			1
-#define STB0899_MODMODE				(0x03 << 0)
-#define STB0899_OFFST_MODMODE			0
-#define STB0899_WIDTH_MODMODE			2
-
-#define STB0899_OFF0_IF_AGC_CNTRL		0xf320
-#define STB0899_BASE_IF_AGC_CNTRL		0x00000000
-#define STB0899_IF_GAIN_INIT			(0x3fff << 13)
-#define STB0899_OFFST_IF_GAIN_INIT		13
-#define STB0899_WIDTH_IF_GAIN_INIT		14
-#define STB0899_IF_GAIN_SENSE			(0x01 << 12)
-#define STB0899_OFFST_IF_GAIN_SENSE		12
-#define STB0899_WIDTH_IF_GAIN_SENSE		1
-#define STB0899_IF_LOOP_GAIN			(0x0f << 8)
-#define STB0899_OFFST_IF_LOOP_GAIN		8
-#define STB0899_WIDTH_IF_LOOP_GAIN		4
-#define STB0899_IF_LD_GAIN_INIT			(0x01 << 7)
-#define STB0899_OFFST_IF_LD_GAIN_INIT		7
-#define STB0899_WIDTH_IF_LD_GAIN_INIT		1
-#define STB0899_IF_AGC_REF			(0x7f << 0)
-#define STB0899_OFFST_IF_AGC_REF		0
-#define STB0899_WIDTH_IF_AGC_REF		7
-
-#define STB0899_OFF0_BB_AGC_CNTRL		0xf324
-#define STB0899_BASE_BB_AGC_CNTRL		0x00000000
-#define STB0899_BB_GAIN_INIT			(0x3fff << 12)
-#define STB0899_OFFST_BB_GAIN_INIT		12
-#define STB0899_WIDTH_BB_GAIN_INIT		14
-#define STB0899_BB_LOOP_GAIN			(0x0f << 8)
-#define STB0899_OFFST_BB_LOOP_GAIN		8
-#define STB0899_WIDTH_BB_LOOP_GAIN		4
-#define STB0899_BB_LD_GAIN_INIT			(0x01 << 7)
-#define STB0899_OFFST_BB_LD_GAIN_INIT		7
-#define STB0899_WIDTH_BB_LD_GAIN_INIT		1
-#define STB0899_BB_AGC_REF			(0x7f << 0)
-#define STB0899_OFFST_BB_AGC_REF		0
-#define STB0899_WIDTH_BB_AGC_REF		7
-
-#define STB0899_OFF0_CRL_CNTRL			0xf328
-#define STB0899_BASE_CRL_CNTRL			0x00000000
-#define STB0899_CRL_LOCK_CLEAR			(0x01 << 5)
-#define STB0899_OFFST_CRL_LOCK_CLEAR		5
-#define STB0899_WIDTH_CRL_LOCK_CLEAR		1
-#define STB0899_CRL_SWPR_CLEAR			(0x01 << 4)
-#define STB0899_OFFST_CRL_SWPR_CLEAR		4
-#define STB0899_WIDTH_CRL_SWPR_CLEAR		1
-#define STB0899_CRL_SWP_ENA			(0x01 << 3)
-#define STB0899_OFFST_CRL_SWP_ENA		3
-#define STB0899_WIDTH_CRL_SWP_ENA		1
-#define STB0899_CRL_DET_SEL			(0x01 << 2)
-#define STB0899_OFFST_CRL_DET_SEL		2
-#define STB0899_WIDTH_CRL_DET_SEL		1
-#define STB0899_CRL_SENSE			(0x01 << 1)
-#define STB0899_OFFST_CRL_SENSE			1
-#define STB0899_WIDTH_CRL_SENSE			1
-#define STB0899_CRL_PHSERR_CLEAR		(0x01 << 0)
-#define STB0899_OFFST_CRL_PHSERR_CLEAR		0
-#define STB0899_WIDTH_CRL_PHSERR_CLEAR		1
-
-#define STB0899_OFF0_CRL_PHS_INIT		0xf32c
-#define STB0899_BASE_CRL_PHS_INIT		0x00000000
-#define STB0899_CRL_PHS_INIT_31			(0x1 << 30)
-#define STB0899_OFFST_CRL_PHS_INIT_31		30
-#define STB0899_WIDTH_CRL_PHS_INIT_31		1
-#define STB0899_CRL_LD_INIT_PHASE		(0x1 << 24)
-#define STB0899_OFFST_CRL_LD_INIT_PHASE		24
-#define STB0899_WIDTH_CRL_LD_INIT_PHASE		1
-#define STB0899_CRL_INIT_PHASE			(0xffffff << 0)
-#define STB0899_OFFST_CRL_INIT_PHASE		0
-#define STB0899_WIDTH_CRL_INIT_PHASE		24
-
-#define STB0899_OFF0_CRL_FREQ_INIT		0xf330
-#define STB0899_BASE_CRL_FREQ_INIT		0x00000000
-#define STB0899_CRL_FREQ_INIT_31		(0x1 << 30)
-#define STB0899_OFFST_CRL_FREQ_INIT_31		30
-#define STB0899_WIDTH_CRL_FREQ_INIT_31		1
-#define STB0899_CRL_LD_FREQ_INIT		(0x1 << 24)
-#define STB0899_OFFST_CRL_LD_FREQ_INIT		24
-#define STB0899_WIDTH_CRL_LD_FREQ_INIT		1
-#define STB0899_CRL_FREQ_INIT			(0xffffff << 0)
-#define STB0899_OFFST_CRL_FREQ_INIT		0
-#define STB0899_WIDTH_CRL_FREQ_INIT		24
-
-#define STB0899_OFF0_CRL_LOOP_GAIN		0xf334
-#define STB0899_BASE_CRL_LOOP_GAIN		0x00000000
-#define STB0899_KCRL2_RSHFT			(0xf << 16)
-#define STB0899_OFFST_KCRL2_RSHFT		16
-#define STB0899_WIDTH_KCRL2_RSHFT		4
-#define STB0899_KCRL1				(0xf << 12)
-#define STB0899_OFFST_KCRL1			12
-#define STB0899_WIDTH_KCRL1			4
-#define STB0899_KCRL1_RSHFT			(0xf << 8)
-#define STB0899_OFFST_KCRL1_RSHFT		8
-#define STB0899_WIDTH_KCRL1_RSHFT		4
-#define STB0899_KCRL0				(0xf << 4)
-#define STB0899_OFFST_KCRL0			4
-#define STB0899_WIDTH_KCRL0			4
-#define STB0899_KCRL0_RSHFT			(0xf << 0)
-#define STB0899_OFFST_KCRL0_RSHFT		0
-#define STB0899_WIDTH_KCRL0_RSHFT		4
-
-#define STB0899_OFF0_CRL_NOM_FREQ		0xf338
-#define STB0899_BASE_CRL_NOM_FREQ		0x00000000
-#define STB0899_CRL_NOM_FREQ			(0x3fffffff << 0)
-#define STB0899_OFFST_CRL_NOM_FREQ		0
-#define STB0899_WIDTH_CRL_NOM_FREQ		30
-
-#define STB0899_OFF0_CRL_SWP_RATE		0xf33c
-#define STB0899_BASE_CRL_SWP_RATE		0x00000000
-#define STB0899_CRL_SWP_RATE			(0x3fffffff << 0)
-#define STB0899_OFFST_CRL_SWP_RATE		0
-#define STB0899_WIDTH_CRL_SWP_RATE		30
-
-#define STB0899_OFF0_CRL_MAX_SWP		0xf340
-#define STB0899_BASE_CRL_MAX_SWP		0x00000000
-#define STB0899_CRL_MAX_SWP			(0x3fffffff << 0)
-#define STB0899_OFFST_CRL_MAX_SWP		0
-#define STB0899_WIDTH_CRL_MAX_SWP		30
-
-#define STB0899_OFF0_CRL_LK_CNTRL		0xf344
-#define STB0899_BASE_CRL_LK_CNTRL		0x00000000
-
-#define STB0899_OFF0_DECIM_CNTRL		0xf348
-#define STB0899_BASE_DECIM_CNTRL		0x00000000
-#define STB0899_BAND_LIMIT_B			(0x01 << 5)
-#define STB0899_OFFST_BAND_LIMIT_B		5
-#define STB0899_WIDTH_BAND_LIMIT_B		1
-#define STB0899_WIN_SEL				(0x03 << 3)
-#define STB0899_OFFST_WIN_SEL			3
-#define STB0899_WIDTH_WIN_SEL			2
-#define STB0899_DECIM_RATE			(0x07 << 0)
-#define STB0899_OFFST_DECIM_RATE		0
-#define STB0899_WIDTH_DECIM_RATE		3
-
-#define STB0899_OFF0_BTR_CNTRL			0xf34c
-#define STB0899_BASE_BTR_CNTRL			0x00000000
-#define STB0899_BTR_FREQ_CORR			(0x7ff << 4)
-#define STB0899_OFFST_BTR_FREQ_CORR		4
-#define STB0899_WIDTH_BTR_FREQ_CORR		11
-#define STB0899_BTR_CLR_LOCK			(0x01 << 3)
-#define STB0899_OFFST_BTR_CLR_LOCK		3
-#define STB0899_WIDTH_BTR_CLR_LOCK		1
-#define STB0899_BTR_SENSE			(0x01 << 2)
-#define STB0899_OFFST_BTR_SENSE			2
-#define STB0899_WIDTH_BTR_SENSE			1
-#define STB0899_BTR_ERR_ENA			(0x01 << 1)
-#define STB0899_OFFST_BTR_ERR_ENA		1
-#define STB0899_WIDTH_BTR_ERR_ENA		1
-#define STB0899_INTRP_PHS_SENSE			(0x01 << 0)
-#define STB0899_OFFST_INTRP_PHS_SENSE		0
-#define STB0899_WIDTH_INTRP_PHS_SENSE		1
-
-#define STB0899_OFF0_BTR_LOOP_GAIN		0xf350
-#define STB0899_BASE_BTR_LOOP_GAIN		0x00000000
-#define STB0899_KBTR2_RSHFT			(0x0f << 16)
-#define STB0899_OFFST_KBTR2_RSHFT		16
-#define STB0899_WIDTH_KBTR2_RSHFT		4
-#define STB0899_KBTR1				(0x0f << 12)
-#define STB0899_OFFST_KBTR1			12
-#define STB0899_WIDTH_KBTR1			4
-#define STB0899_KBTR1_RSHFT			(0x0f << 8)
-#define STB0899_OFFST_KBTR1_RSHFT		8
-#define STB0899_WIDTH_KBTR1_RSHFT		4
-#define STB0899_KBTR0				(0x0f << 4)
-#define STB0899_OFFST_KBTR0			4
-#define STB0899_WIDTH_KBTR0			4
-#define STB0899_KBTR0_RSHFT			(0x0f << 0)
-#define STB0899_OFFST_KBTR0_RSHFT		0
-#define STB0899_WIDTH_KBTR0_RSHFT		4
-
-#define STB0899_OFF0_BTR_PHS_INIT		0xf354
-#define STB0899_BASE_BTR_PHS_INIT		0x00000000
-#define STB0899_BTR_LD_PHASE_INIT		(0x01 << 28)
-#define STB0899_OFFST_BTR_LD_PHASE_INIT		28
-#define STB0899_WIDTH_BTR_LD_PHASE_INIT		1
-#define STB0899_BTR_INIT_PHASE			(0xfffffff << 0)
-#define STB0899_OFFST_BTR_INIT_PHASE		0
-#define STB0899_WIDTH_BTR_INIT_PHASE		28
-
-#define STB0899_OFF0_BTR_FREQ_INIT		0xf358
-#define STB0899_BASE_BTR_FREQ_INIT		0x00000000
-#define STB0899_BTR_LD_FREQ_INIT		(1 << 28)
-#define STB0899_OFFST_BTR_LD_FREQ_INIT		28
-#define STB0899_WIDTH_BTR_LD_FREQ_INIT		1
-#define STB0899_BTR_FREQ_INIT			(0xfffffff << 0)
-#define STB0899_OFFST_BTR_FREQ_INIT		0
-#define STB0899_WIDTH_BTR_FREQ_INIT		28
-
-#define STB0899_OFF0_BTR_NOM_FREQ		0xf35c
-#define STB0899_BASE_BTR_NOM_FREQ		0x00000000
-#define STB0899_BTR_NOM_FREQ			(0xfffffff << 0)
-#define STB0899_OFFST_BTR_NOM_FREQ		0
-#define STB0899_WIDTH_BTR_NOM_FREQ		28
-
-#define STB0899_OFF0_BTR_LK_CNTRL		0xf360
-#define STB0899_BASE_BTR_LK_CNTRL		0x00000000
-#define STB0899_BTR_MIN_ENERGY			(0x0f << 24)
-#define STB0899_OFFST_BTR_MIN_ENERGY		24
-#define STB0899_WIDTH_BTR_MIN_ENERGY		4
-#define STB0899_BTR_LOCK_TH_LO			(0xff << 16)
-#define STB0899_OFFST_BTR_LOCK_TH_LO		16
-#define STB0899_WIDTH_BTR_LOCK_TH_LO		8
-#define STB0899_BTR_LOCK_TH_HI			(0xff << 8)
-#define STB0899_OFFST_BTR_LOCK_TH_HI		8
-#define STB0899_WIDTH_BTR_LOCK_TH_HI		8
-#define STB0899_BTR_LOCK_GAIN			(0x03 << 6)
-#define STB0899_OFFST_BTR_LOCK_GAIN		6
-#define STB0899_WIDTH_BTR_LOCK_GAIN		2
-#define STB0899_BTR_LOCK_LEAK			(0x3f << 0)
-#define STB0899_OFFST_BTR_LOCK_LEAK		0
-#define STB0899_WIDTH_BTR_LOCK_LEAK		6
-
-#define STB0899_OFF0_DECN_CNTRL			0xf364
-#define STB0899_BASE_DECN_CNTRL			0x00000000
-
-#define STB0899_OFF0_TP_CNTRL			0xf368
-#define STB0899_BASE_TP_CNTRL			0x00000000
-
-#define STB0899_OFF0_TP_BUF_STATUS		0xf36c
-#define STB0899_BASE_TP_BUF_STATUS		0x00000000
-#define STB0899_TP_BUFFER_FULL                  (1 << 0)
-
-#define STB0899_OFF0_DC_ESTIM			0xf37c
-#define STB0899_BASE_DC_ESTIM			0x0000
-#define STB0899_I_DC_ESTIMATE			(0xff << 8)
-#define STB0899_OFFST_I_DC_ESTIMATE		8
-#define STB0899_WIDTH_I_DC_ESTIMATE		8
-#define STB0899_Q_DC_ESTIMATE			(0xff << 0)
-#define STB0899_OFFST_Q_DC_ESTIMATE		0
-#define STB0899_WIDTH_Q_DC_ESTIMATE		8
-
-#define STB0899_OFF0_FLL_CNTRL			0xf310
-#define STB0899_BASE_FLL_CNTRL			0x00000020
-#define STB0899_CRL_FLL_ACC			(0x01 << 4)
-#define STB0899_OFFST_CRL_FLL_ACC		4
-#define STB0899_WIDTH_CRL_FLL_ACC		1
-#define STB0899_FLL_AVG_PERIOD			(0x0f << 0)
-#define STB0899_OFFST_FLL_AVG_PERIOD		0
-#define STB0899_WIDTH_FLL_AVG_PERIOD		4
-
-#define STB0899_OFF0_FLL_FREQ_WD		0xf314
-#define STB0899_BASE_FLL_FREQ_WD		0x00000020
-#define STB0899_FLL_FREQ_WD			(0xffffffff << 0)
-#define STB0899_OFFST_FLL_FREQ_WD		0
-#define STB0899_WIDTH_FLL_FREQ_WD		32
-
-#define STB0899_OFF0_ANTI_ALIAS_SEL		0xf358
-#define STB0899_BASE_ANTI_ALIAS_SEL		0x00000020
-#define STB0899_ANTI_ALIAS_SELB			(0x03 << 0)
-#define STB0899_OFFST_ANTI_ALIAS_SELB		0
-#define STB0899_WIDTH_ANTI_ALIAS_SELB		2
-
-#define STB0899_OFF0_RRC_ALPHA			0xf35c
-#define STB0899_BASE_RRC_ALPHA			0x00000020
-#define STB0899_RRC_ALPHA			(0x03 << 0)
-#define STB0899_OFFST_RRC_ALPHA			0
-#define STB0899_WIDTH_RRC_ALPHA			2
-
-#define STB0899_OFF0_DC_ADAPT_LSHFT		0xf360
-#define STB0899_BASE_DC_ADAPT_LSHFT		0x00000020
-#define STB0899_DC_ADAPT_LSHFT			(0x077 << 0)
-#define STB0899_OFFST_DC_ADAPT_LSHFT		0
-#define STB0899_WIDTH_DC_ADAPT_LSHFT		3
-
-#define STB0899_OFF0_IMB_OFFSET			0xf364
-#define STB0899_BASE_IMB_OFFSET			0x00000020
-#define STB0899_PHS_IMB_COMP			(0xff << 8)
-#define STB0899_OFFST_PHS_IMB_COMP		8
-#define STB0899_WIDTH_PHS_IMB_COMP		8
-#define STB0899_AMPL_IMB_COMP			(0xff << 0)
-#define STB0899_OFFST_AMPL_IMB_COMP		0
-#define STB0899_WIDTH_AMPL_IMB_COMP		8
-
-#define STB0899_OFF0_IMB_ESTIMATE		0xf368
-#define STB0899_BASE_IMB_ESTIMATE		0x00000020
-#define STB0899_PHS_IMB_ESTIMATE		(0xff << 8)
-#define STB0899_OFFST_PHS_IMB_ESTIMATE		8
-#define STB0899_WIDTH_PHS_IMB_ESTIMATE		8
-#define STB0899_AMPL_IMB_ESTIMATE		(0xff << 0)
-#define STB0899_OFFST_AMPL_IMB_ESTIMATE		0
-#define STB0899_WIDTH_AMPL_IMB_ESTIMATE		8
-
-#define STB0899_OFF0_IMB_CNTRL			0xf36c
-#define STB0899_BASE_IMB_CNTRL			0x00000020
-#define STB0899_PHS_ADAPT_LSHFT			(0x07 << 4)
-#define STB0899_OFFST_PHS_ADAPT_LSHFT		4
-#define STB0899_WIDTH_PHS_ADAPT_LSHFT		3
-#define STB0899_AMPL_ADAPT_LSHFT		(0x07 << 1)
-#define STB0899_OFFST_AMPL_ADAPT_LSHFT		1
-#define STB0899_WIDTH_AMPL_ADAPT_LSHFT		3
-#define STB0899_IMB_COMP			(0x01 << 0)
-#define STB0899_OFFST_IMB_COMP			0
-#define STB0899_WIDTH_IMB_COMP			1
-
-#define STB0899_OFF0_IF_AGC_CNTRL2		0xf374
-#define STB0899_BASE_IF_AGC_CNTRL2		0x00000020
-#define STB0899_IF_AGC_LOCK_TH			(0xff << 11)
-#define STB0899_OFFST_IF_AGC_LOCK_TH		11
-#define STB0899_WIDTH_IF_AGC_LOCK_TH		8
-#define STB0899_IF_AGC_SD_DIV			(0xff << 3)
-#define STB0899_OFFST_IF_AGC_SD_DIV		3
-#define STB0899_WIDTH_IF_AGC_SD_DIV		8
-#define STB0899_IF_AGC_DUMP_PER			(0x07 << 0)
-#define STB0899_OFFST_IF_AGC_DUMP_PER		0
-#define STB0899_WIDTH_IF_AGC_DUMP_PER		3
-
-#define STB0899_OFF0_DMD_CNTRL2			0xf378
-#define STB0899_BASE_DMD_CNTRL2			0x00000020
-#define STB0899_SPECTRUM_INVERT			(0x01 << 2)
-#define STB0899_OFFST_SPECTRUM_INVERT		2
-#define STB0899_WIDTH_SPECTRUM_INVERT		1
-#define STB0899_AGC_MODE			(0x01 << 1)
-#define STB0899_OFFST_AGC_MODE			1
-#define STB0899_WIDTH_AGC_MODE			1
-#define STB0899_CRL_FREQ_ADJ			(0x01 << 0)
-#define STB0899_OFFST_CRL_FREQ_ADJ		0
-#define STB0899_WIDTH_CRL_FREQ_ADJ		1
-
-#define STB0899_OFF0_TP_BUFFER			0xf300
-#define STB0899_BASE_TP_BUFFER			0x00000040
-#define STB0899_TP_BUFFER_IN			(0xffff << 0)
-#define STB0899_OFFST_TP_BUFFER_IN		0
-#define STB0899_WIDTH_TP_BUFFER_IN		16
-
-#define STB0899_OFF0_TP_BUFFER1			0xf304
-#define STB0899_BASE_TP_BUFFER1			0x00000040
-#define STB0899_OFF0_TP_BUFFER2			0xf308
-#define STB0899_BASE_TP_BUFFER2			0x00000040
-#define STB0899_OFF0_TP_BUFFER3			0xf30c
-#define STB0899_BASE_TP_BUFFER3			0x00000040
-#define STB0899_OFF0_TP_BUFFER4			0xf310
-#define STB0899_BASE_TP_BUFFER4			0x00000040
-#define STB0899_OFF0_TP_BUFFER5			0xf314
-#define STB0899_BASE_TP_BUFFER5			0x00000040
-#define STB0899_OFF0_TP_BUFFER6			0xf318
-#define STB0899_BASE_TP_BUFFER6			0x00000040
-#define STB0899_OFF0_TP_BUFFER7			0xf31c
-#define STB0899_BASE_TP_BUFFER7			0x00000040
-#define STB0899_OFF0_TP_BUFFER8			0xf320
-#define STB0899_BASE_TP_BUFFER8			0x00000040
-#define STB0899_OFF0_TP_BUFFER9			0xf324
-#define STB0899_BASE_TP_BUFFER9			0x00000040
-#define STB0899_OFF0_TP_BUFFER10		0xf328
-#define STB0899_BASE_TP_BUFFER10		0x00000040
-#define STB0899_OFF0_TP_BUFFER11		0xf32c
-#define STB0899_BASE_TP_BUFFER11		0x00000040
-#define STB0899_OFF0_TP_BUFFER12		0xf330
-#define STB0899_BASE_TP_BUFFER12		0x00000040
-#define STB0899_OFF0_TP_BUFFER13		0xf334
-#define STB0899_BASE_TP_BUFFER13		0x00000040
-#define STB0899_OFF0_TP_BUFFER14		0xf338
-#define STB0899_BASE_TP_BUFFER14		0x00000040
-#define STB0899_OFF0_TP_BUFFER15		0xf33c
-#define STB0899_BASE_TP_BUFFER15		0x00000040
-#define STB0899_OFF0_TP_BUFFER16		0xf340
-#define STB0899_BASE_TP_BUFFER16		0x00000040
-#define STB0899_OFF0_TP_BUFFER17		0xf344
-#define STB0899_BASE_TP_BUFFER17		0x00000040
-#define STB0899_OFF0_TP_BUFFER18		0xf348
-#define STB0899_BASE_TP_BUFFER18		0x00000040
-#define STB0899_OFF0_TP_BUFFER19		0xf34c
-#define STB0899_BASE_TP_BUFFER19		0x00000040
-#define STB0899_OFF0_TP_BUFFER20		0xf350
-#define STB0899_BASE_TP_BUFFER20		0x00000040
-#define STB0899_OFF0_TP_BUFFER21		0xf354
-#define STB0899_BASE_TP_BUFFER21		0x00000040
-#define STB0899_OFF0_TP_BUFFER22		0xf358
-#define STB0899_BASE_TP_BUFFER22		0x00000040
-#define STB0899_OFF0_TP_BUFFER23		0xf35c
-#define STB0899_BASE_TP_BUFFER23		0x00000040
-#define STB0899_OFF0_TP_BUFFER24		0xf360
-#define STB0899_BASE_TP_BUFFER24		0x00000040
-#define STB0899_OFF0_TP_BUFFER25		0xf364
-#define STB0899_BASE_TP_BUFFER25		0x00000040
-#define STB0899_OFF0_TP_BUFFER26		0xf368
-#define STB0899_BASE_TP_BUFFER26		0x00000040
-#define STB0899_OFF0_TP_BUFFER27		0xf36c
-#define STB0899_BASE_TP_BUFFER27		0x00000040
-#define STB0899_OFF0_TP_BUFFER28		0xf370
-#define STB0899_BASE_TP_BUFFER28		0x00000040
-#define STB0899_OFF0_TP_BUFFER29		0xf374
-#define STB0899_BASE_TP_BUFFER29		0x00000040
-#define STB0899_OFF0_TP_BUFFER30		0xf378
-#define STB0899_BASE_TP_BUFFER30		0x00000040
-#define STB0899_OFF0_TP_BUFFER31		0xf37c
-#define STB0899_BASE_TP_BUFFER31		0x00000040
-#define STB0899_OFF0_TP_BUFFER32		0xf300
-#define STB0899_BASE_TP_BUFFER32		0x00000060
-#define STB0899_OFF0_TP_BUFFER33		0xf304
-#define STB0899_BASE_TP_BUFFER33		0x00000060
-#define STB0899_OFF0_TP_BUFFER34		0xf308
-#define STB0899_BASE_TP_BUFFER34		0x00000060
-#define STB0899_OFF0_TP_BUFFER35		0xf30c
-#define STB0899_BASE_TP_BUFFER35		0x00000060
-#define STB0899_OFF0_TP_BUFFER36		0xf310
-#define STB0899_BASE_TP_BUFFER36		0x00000060
-#define STB0899_OFF0_TP_BUFFER37		0xf314
-#define STB0899_BASE_TP_BUFFER37		0x00000060
-#define STB0899_OFF0_TP_BUFFER38		0xf318
-#define STB0899_BASE_TP_BUFFER38		0x00000060
-#define STB0899_OFF0_TP_BUFFER39		0xf31c
-#define STB0899_BASE_TP_BUFFER39		0x00000060
-#define STB0899_OFF0_TP_BUFFER40		0xf320
-#define STB0899_BASE_TP_BUFFER40		0x00000060
-#define STB0899_OFF0_TP_BUFFER41		0xf324
-#define STB0899_BASE_TP_BUFFER41		0x00000060
-#define STB0899_OFF0_TP_BUFFER42		0xf328
-#define STB0899_BASE_TP_BUFFER42		0x00000060
-#define STB0899_OFF0_TP_BUFFER43		0xf32c
-#define STB0899_BASE_TP_BUFFER43		0x00000060
-#define STB0899_OFF0_TP_BUFFER44		0xf330
-#define STB0899_BASE_TP_BUFFER44		0x00000060
-#define STB0899_OFF0_TP_BUFFER45		0xf334
-#define STB0899_BASE_TP_BUFFER45		0x00000060
-#define STB0899_OFF0_TP_BUFFER46		0xf338
-#define STB0899_BASE_TP_BUFFER46		0x00000060
-#define STB0899_OFF0_TP_BUFFER47		0xf33c
-#define STB0899_BASE_TP_BUFFER47		0x00000060
-#define STB0899_OFF0_TP_BUFFER48		0xf340
-#define STB0899_BASE_TP_BUFFER48		0x00000060
-#define STB0899_OFF0_TP_BUFFER49		0xf344
-#define STB0899_BASE_TP_BUFFER49		0x00000060
-#define STB0899_OFF0_TP_BUFFER50		0xf348
-#define STB0899_BASE_TP_BUFFER50		0x00000060
-#define STB0899_OFF0_TP_BUFFER51		0xf34c
-#define STB0899_BASE_TP_BUFFER51		0x00000060
-#define STB0899_OFF0_TP_BUFFER52		0xf350
-#define STB0899_BASE_TP_BUFFER52		0x00000060
-#define STB0899_OFF0_TP_BUFFER53		0xf354
-#define STB0899_BASE_TP_BUFFER53		0x00000060
-#define STB0899_OFF0_TP_BUFFER54		0xf358
-#define STB0899_BASE_TP_BUFFER54		0x00000060
-#define STB0899_OFF0_TP_BUFFER55		0xf35c
-#define STB0899_BASE_TP_BUFFER55		0x00000060
-#define STB0899_OFF0_TP_BUFFER56		0xf360
-#define STB0899_BASE_TP_BUFFER56		0x00000060
-#define STB0899_OFF0_TP_BUFFER57		0xf364
-#define STB0899_BASE_TP_BUFFER57		0x00000060
-#define STB0899_OFF0_TP_BUFFER58		0xf368
-#define STB0899_BASE_TP_BUFFER58		0x00000060
-#define STB0899_OFF0_TP_BUFFER59		0xf36c
-#define STB0899_BASE_TP_BUFFER59		0x00000060
-#define STB0899_OFF0_TP_BUFFER60		0xf370
-#define STB0899_BASE_TP_BUFFER60		0x00000060
-#define STB0899_OFF0_TP_BUFFER61		0xf374
-#define STB0899_BASE_TP_BUFFER61		0x00000060
-#define STB0899_OFF0_TP_BUFFER62		0xf378
-#define STB0899_BASE_TP_BUFFER62		0x00000060
-#define STB0899_OFF0_TP_BUFFER63		0xf37c
-#define STB0899_BASE_TP_BUFFER63		0x00000060
-
-#define STB0899_OFF0_RESET_CNTRL		0xf300
-#define STB0899_BASE_RESET_CNTRL		0x00000400
-#define STB0899_DVBS2_RESET			(0x01 << 0)
-#define STB0899_OFFST_DVBS2_RESET		0
-#define STB0899_WIDTH_DVBS2_RESET		1
-
-#define STB0899_OFF0_ACM_ENABLE			0xf304
-#define STB0899_BASE_ACM_ENABLE			0x00000400
-#define STB0899_ACM_ENABLE			1
-
-#define STB0899_OFF0_DESCR_CNTRL		0xf30c
-#define STB0899_BASE_DESCR_CNTRL		0x00000400
-#define STB0899_OFFST_DESCR_CNTRL               0
-#define STB0899_WIDTH_DESCR_CNTRL               16
-
-#define STB0899_OFF0_UWP_CNTRL1			0xf320
-#define STB0899_BASE_UWP_CNTRL1			0x00000400
-#define STB0899_UWP_TH_SOF			(0x7fff << 11)
-#define STB0899_OFFST_UWP_TH_SOF		11
-#define STB0899_WIDTH_UWP_TH_SOF		15
-#define STB0899_UWP_ESN0_QUANT			(0xff << 3)
-#define STB0899_OFFST_UWP_ESN0_QUANT		3
-#define STB0899_WIDTH_UWP_ESN0_QUANT		8
-#define STB0899_UWP_ESN0_AVE			(0x03 << 1)
-#define STB0899_OFFST_UWP_ESN0_AVE		1
-#define STB0899_WIDTH_UWP_ESN0_AVE		2
-#define STB0899_UWP_START			(0x01 << 0)
-#define STB0899_OFFST_UWP_START			0
-#define STB0899_WIDTH_UWP_START			1
-
-#define STB0899_OFF0_UWP_CNTRL2			0xf324
-#define STB0899_BASE_UWP_CNTRL2			0x00000400
-#define STB0899_UWP_MISS_TH			(0xff << 16)
-#define STB0899_OFFST_UWP_MISS_TH		16
-#define STB0899_WIDTH_UWP_MISS_TH		8
-#define STB0899_FE_FINE_TRK			(0xff << 8)
-#define STB0899_OFFST_FE_FINE_TRK		8
-#define STB0899_WIDTH_FE_FINE_TRK		8
-#define STB0899_FE_COARSE_TRK			(0xff << 0)
-#define STB0899_OFFST_FE_COARSE_TRK		0
-#define STB0899_WIDTH_FE_COARSE_TRK		8
-
-#define STB0899_OFF0_UWP_STAT1			0xf328
-#define STB0899_BASE_UWP_STAT1			0x00000400
-#define STB0899_UWP_STATE			(0x03ff << 15)
-#define STB0899_OFFST_UWP_STATE			15
-#define STB0899_WIDTH_UWP_STATE			10
-#define STB0899_UW_MAX_PEAK			(0x7fff << 0)
-#define STB0899_OFFST_UW_MAX_PEAK		0
-#define STB0899_WIDTH_UW_MAX_PEAK		15
-
-#define STB0899_OFF0_UWP_STAT2			0xf32c
-#define STB0899_BASE_UWP_STAT2			0x00000400
-#define STB0899_ESNO_EST			(0x07ffff << 7)
-#define STB0899_OFFST_ESN0_EST			7
-#define STB0899_WIDTH_ESN0_EST			19
-#define STB0899_UWP_DECODE_MOD			(0x7f << 0)
-#define STB0899_OFFST_UWP_DECODE_MOD		0
-#define STB0899_WIDTH_UWP_DECODE_MOD		7
-
-#define STB0899_OFF0_DMD_CORE_ID		0xf334
-#define STB0899_BASE_DMD_CORE_ID		0x00000400
-#define STB0899_CORE_ID				(0xffffffff << 0)
-#define STB0899_OFFST_CORE_ID			0
-#define STB0899_WIDTH_CORE_ID			32
-
-#define STB0899_OFF0_DMD_VERSION_ID		0xf33c
-#define STB0899_BASE_DMD_VERSION_ID		0x00000400
-#define STB0899_VERSION_ID			(0xff << 0)
-#define STB0899_OFFST_VERSION_ID		0
-#define STB0899_WIDTH_VERSION_ID		8
-
-#define STB0899_OFF0_DMD_STAT2			0xf340
-#define STB0899_BASE_DMD_STAT2			0x00000400
-#define STB0899_CSM_LOCK			(0x01 << 1)
-#define STB0899_OFFST_CSM_LOCK			1
-#define STB0899_WIDTH_CSM_LOCK			1
-#define STB0899_UWP_LOCK			(0x01 << 0)
-#define STB0899_OFFST_UWP_LOCK			0
-#define STB0899_WIDTH_UWP_LOCK			1
-
-#define STB0899_OFF0_FREQ_ADJ_SCALE		0xf344
-#define STB0899_BASE_FREQ_ADJ_SCALE		0x00000400
-#define STB0899_FREQ_ADJ_SCALE			(0x0fff << 0)
-#define STB0899_OFFST_FREQ_ADJ_SCALE		0
-#define STB0899_WIDTH_FREQ_ADJ_SCALE		12
-
-#define STB0899_OFF0_UWP_CNTRL3			0xf34c
-#define STB0899_BASE_UWP_CNTRL3			0x00000400
-#define STB0899_UWP_TH_TRACK			(0x7fff << 15)
-#define STB0899_OFFST_UWP_TH_TRACK		15
-#define STB0899_WIDTH_UWP_TH_TRACK		15
-#define STB0899_UWP_TH_ACQ			(0x7fff << 0)
-#define STB0899_OFFST_UWP_TH_ACQ		0
-#define STB0899_WIDTH_UWP_TH_ACQ		15
-
-#define STB0899_OFF0_SYM_CLK_SEL		0xf350
-#define STB0899_BASE_SYM_CLK_SEL		0x00000400
-#define STB0899_SYM_CLK_SEL			(0x03 << 0)
-#define STB0899_OFFST_SYM_CLK_SEL		0
-#define STB0899_WIDTH_SYM_CLK_SEL		2
-
-#define STB0899_OFF0_SOF_SRCH_TO		0xf354
-#define STB0899_BASE_SOF_SRCH_TO		0x00000400
-#define STB0899_SOF_SEARCH_TIMEOUT		(0x3fffff << 0)
-#define STB0899_OFFST_SOF_SEARCH_TIMEOUT	0
-#define STB0899_WIDTH_SOF_SEARCH_TIMEOUT	22
-
-#define STB0899_OFF0_ACQ_CNTRL1			0xf358
-#define STB0899_BASE_ACQ_CNTRL1			0x00000400
-#define STB0899_FE_FINE_ACQ			(0xff << 8)
-#define STB0899_OFFST_FE_FINE_ACQ		8
-#define STB0899_WIDTH_FE_FINE_ACQ		8
-#define STB0899_FE_COARSE_ACQ			(0xff << 0)
-#define STB0899_OFFST_FE_COARSE_ACQ		0
-#define STB0899_WIDTH_FE_COARSE_ACQ		8
-
-#define STB0899_OFF0_ACQ_CNTRL2			0xf35c
-#define STB0899_BASE_ACQ_CNTRL2			0x00000400
-#define STB0899_ZIGZAG				(0x01 << 25)
-#define STB0899_OFFST_ZIGZAG			25
-#define STB0899_WIDTH_ZIGZAG			1
-#define STB0899_NUM_STEPS			(0xff << 17)
-#define STB0899_OFFST_NUM_STEPS			17
-#define STB0899_WIDTH_NUM_STEPS			8
-#define STB0899_FREQ_STEPSIZE			(0x1ffff << 0)
-#define STB0899_OFFST_FREQ_STEPSIZE		0
-#define STB0899_WIDTH_FREQ_STEPSIZE		17
-
-#define STB0899_OFF0_ACQ_CNTRL3			0xf360
-#define STB0899_BASE_ACQ_CNTRL3			0x00000400
-#define STB0899_THRESHOLD_SCL			(0x3f << 23)
-#define STB0899_OFFST_THRESHOLD_SCL		23
-#define STB0899_WIDTH_THRESHOLD_SCL		6
-#define STB0899_UWP_TH_SRCH			(0x7fff << 8)
-#define STB0899_OFFST_UWP_TH_SRCH		8
-#define STB0899_WIDTH_UWP_TH_SRCH		15
-#define STB0899_AUTO_REACQUIRE			(0x01 << 7)
-#define STB0899_OFFST_AUTO_REACQUIRE		7
-#define STB0899_WIDTH_AUTO_REACQUIRE		1
-#define STB0899_TRACK_LOCK_SEL			(0x01 << 6)
-#define STB0899_OFFST_TRACK_LOCK_SEL		6
-#define STB0899_WIDTH_TRACK_LOCK_SEL		1
-#define STB0899_ACQ_SEARCH_MODE			(0x03 << 4)
-#define STB0899_OFFST_ACQ_SEARCH_MODE		4
-#define STB0899_WIDTH_ACQ_SEARCH_MODE		2
-#define STB0899_CONFIRM_FRAMES			(0x0f << 0)
-#define STB0899_OFFST_CONFIRM_FRAMES		0
-#define STB0899_WIDTH_CONFIRM_FRAMES		4
-
-#define STB0899_OFF0_FE_SETTLE			0xf364
-#define STB0899_BASE_FE_SETTLE			0x00000400
-#define STB0899_SETTLING_TIME			(0x3fffff << 0)
-#define STB0899_OFFST_SETTLING_TIME		0
-#define STB0899_WIDTH_SETTLING_TIME		22
-
-#define STB0899_OFF0_AC_DWELL			0xf368
-#define STB0899_BASE_AC_DWELL			0x00000400
-#define STB0899_DWELL_TIME			(0x3fffff << 0)
-#define STB0899_OFFST_DWELL_TIME		0
-#define STB0899_WIDTH_DWELL_TIME		22
-
-#define STB0899_OFF0_ACQUIRE_TRIG		0xf36c
-#define STB0899_BASE_ACQUIRE_TRIG		0x00000400
-#define STB0899_ACQUIRE				(0x01 << 0)
-#define STB0899_OFFST_ACQUIRE			0
-#define STB0899_WIDTH_ACQUIRE			1
-
-#define STB0899_OFF0_LOCK_LOST			0xf370
-#define STB0899_BASE_LOCK_LOST			0x00000400
-#define STB0899_LOCK_LOST			(0x01 << 0)
-#define STB0899_OFFST_LOCK_LOST			0
-#define STB0899_WIDTH_LOCK_LOST			1
-
-#define STB0899_OFF0_ACQ_STAT1			0xf374
-#define STB0899_BASE_ACQ_STAT1			0x00000400
-#define STB0899_STEP_FREQ			(0x1fffff << 11)
-#define STB0899_OFFST_STEP_FREQ			11
-#define STB0899_WIDTH_STEP_FREQ			21
-#define STB0899_ACQ_STATE			(0x07 << 8)
-#define STB0899_OFFST_ACQ_STATE			8
-#define STB0899_WIDTH_ACQ_STATE			3
-#define STB0899_UW_DETECT_COUNT			(0xff << 0)
-#define STB0899_OFFST_UW_DETECT_COUNT		0
-#define STB0899_WIDTH_UW_DETECT_COUNT		8
-
-#define STB0899_OFF0_ACQ_TIMEOUT		0xf378
-#define STB0899_BASE_ACQ_TIMEOUT		0x00000400
-#define STB0899_ACQ_TIMEOUT			(0x3fffff << 0)
-#define STB0899_OFFST_ACQ_TIMEOUT		0
-#define STB0899_WIDTH_ACQ_TIMEOUT		22
-
-#define STB0899_OFF0_ACQ_TIME			0xf37c
-#define STB0899_BASE_ACQ_TIME			0x00000400
-#define STB0899_ACQ_TIME_SYM			(0xffffff << 0)
-#define STB0899_OFFST_ACQ_TIME_SYM		0
-#define STB0899_WIDTH_ACQ_TIME_SYM		24
-
-#define STB0899_OFF0_FINAL_AGC_CNTRL		0xf308
-#define STB0899_BASE_FINAL_AGC_CNTRL		0x00000440
-#define STB0899_FINAL_GAIN_INIT			(0x3fff << 12)
-#define STB0899_OFFST_FINAL_GAIN_INIT		12
-#define STB0899_WIDTH_FINAL_GAIN_INIT		14
-#define STB0899_FINAL_LOOP_GAIN			(0x0f << 8)
-#define STB0899_OFFST_FINAL_LOOP_GAIN		8
-#define STB0899_WIDTH_FINAL_LOOP_GAIN		4
-#define STB0899_FINAL_LD_GAIN_INIT		(0x01 << 7)
-#define STB0899_OFFST_FINAL_LD_GAIN_INIT	7
-#define STB0899_WIDTH_FINAL_LD_GAIN_INIT	1
-#define STB0899_FINAL_AGC_REF			(0x7f << 0)
-#define STB0899_OFFST_FINAL_AGC_REF		0
-#define STB0899_WIDTH_FINAL_AGC_REF		7
-
-#define STB0899_OFF0_FINAL_AGC_GAIN		0xf30c
-#define STB0899_BASE_FINAL_AGC_GAIN		0x00000440
-#define STB0899_FINAL_AGC_GAIN			(0x3fff << 0)
-#define STB0899_OFFST_FINAL_AGC_GAIN		0
-#define STB0899_WIDTH_FINAL_AGC_GAIN		14
-
-#define STB0899_OFF0_EQUALIZER_INIT		0xf310
-#define STB0899_BASE_EQUALIZER_INIT		0x00000440
-#define STB0899_EQ_SRST				(0x01 << 1)
-#define STB0899_OFFST_EQ_SRST			1
-#define STB0899_WIDTH_EQ_SRST			1
-#define STB0899_EQ_INIT				(0x01 << 0)
-#define STB0899_OFFST_EQ_INIT			0
-#define STB0899_WIDTH_EQ_INIT			1
-
-#define STB0899_OFF0_EQ_CNTRL			0xf314
-#define STB0899_BASE_EQ_CNTRL			0x00000440
-#define STB0899_EQ_ADAPT_MODE			(0x01 << 18)
-#define STB0899_OFFST_EQ_ADAPT_MODE		18
-#define STB0899_WIDTH_EQ_ADAPT_MODE		1
-#define STB0899_EQ_DELAY			(0x0f << 14)
-#define STB0899_OFFST_EQ_DELAY			14
-#define STB0899_WIDTH_EQ_DELAY			4
-#define STB0899_EQ_QUANT_LEVEL			(0xff << 6)
-#define STB0899_OFFST_EQ_QUANT_LEVEL		6
-#define STB0899_WIDTH_EQ_QUANT_LEVEL		8
-#define STB0899_EQ_DISABLE_UPDATE		(0x01 << 5)
-#define STB0899_OFFST_EQ_DISABLE_UPDATE		5
-#define STB0899_WIDTH_EQ_DISABLE_UPDATE		1
-#define STB0899_EQ_BYPASS			(0x01 << 4)
-#define STB0899_OFFST_EQ_BYPASS			4
-#define STB0899_WIDTH_EQ_BYPASS			1
-#define STB0899_EQ_SHIFT			(0x0f << 0)
-#define STB0899_OFFST_EQ_SHIFT			0
-#define STB0899_WIDTH_EQ_SHIFT			4
-
-#define STB0899_OFF0_EQ_I_INIT_COEFF_0		0xf320
-#define STB0899_OFF1_EQ_I_INIT_COEFF_1		0xf324
-#define STB0899_OFF2_EQ_I_INIT_COEFF_2		0xf328
-#define STB0899_OFF3_EQ_I_INIT_COEFF_3		0xf32c
-#define STB0899_OFF4_EQ_I_INIT_COEFF_4		0xf330
-#define STB0899_OFF5_EQ_I_INIT_COEFF_5		0xf334
-#define STB0899_OFF6_EQ_I_INIT_COEFF_6		0xf338
-#define STB0899_OFF7_EQ_I_INIT_COEFF_7		0xf33c
-#define STB0899_OFF8_EQ_I_INIT_COEFF_8		0xf340
-#define STB0899_OFF9_EQ_I_INIT_COEFF_9		0xf344
-#define STB0899_OFFa_EQ_I_INIT_COEFF_10		0xf348
-#define STB0899_BASE_EQ_I_INIT_COEFF_N		0x00000440
-#define STB0899_EQ_I_INIT_COEFF_N		(0x0fff << 0)
-#define STB0899_OFFST_EQ_I_INIT_COEFF_N		0
-#define STB0899_WIDTH_EQ_I_INIT_COEFF_N		12
-
-#define STB0899_OFF0_EQ_Q_INIT_COEFF_0		0xf350
-#define STB0899_OFF1_EQ_Q_INIT_COEFF_1		0xf354
-#define STB0899_OFF2_EQ_Q_INIT_COEFF_2		0xf358
-#define STB0899_OFF3_EQ_Q_INIT_COEFF_3		0xf35c
-#define STB0899_OFF4_EQ_Q_INIT_COEFF_4		0xf360
-#define STB0899_OFF5_EQ_Q_INIT_COEFF_5		0xf364
-#define STB0899_OFF6_EQ_Q_INIT_COEFF_6		0xf368
-#define STB0899_OFF7_EQ_Q_INIT_COEFF_7		0xf36c
-#define STB0899_OFF8_EQ_Q_INIT_COEFF_8		0xf370
-#define STB0899_OFF9_EQ_Q_INIT_COEFF_9		0xf374
-#define STB0899_OFFa_EQ_Q_INIT_COEFF_10		0xf378
-#define STB0899_BASE_EQ_Q_INIT_COEFF_N		0x00000440
-#define STB0899_EQ_Q_INIT_COEFF_N		(0x0fff << 0)
-#define STB0899_OFFST_EQ_Q_INIT_COEFF_N		0
-#define STB0899_WIDTH_EQ_Q_INIT_COEFF_N		12
-
-#define STB0899_OFF0_EQ_I_OUT_COEFF_0		0xf300
-#define STB0899_OFF1_EQ_I_OUT_COEFF_1		0xf304
-#define STB0899_OFF2_EQ_I_OUT_COEFF_2		0xf308
-#define STB0899_OFF3_EQ_I_OUT_COEFF_3		0xf30c
-#define STB0899_OFF4_EQ_I_OUT_COEFF_4		0xf310
-#define STB0899_OFF5_EQ_I_OUT_COEFF_5		0xf314
-#define STB0899_OFF6_EQ_I_OUT_COEFF_6		0xf318
-#define STB0899_OFF7_EQ_I_OUT_COEFF_7		0xf31c
-#define STB0899_OFF8_EQ_I_OUT_COEFF_8		0xf320
-#define STB0899_OFF9_EQ_I_OUT_COEFF_9		0xf324
-#define STB0899_OFFa_EQ_I_OUT_COEFF_10		0xf328
-#define STB0899_BASE_EQ_I_OUT_COEFF_N		0x00000460
-#define STB0899_EQ_I_OUT_COEFF_N		(0x0fff << 0)
-#define STB0899_OFFST_EQ_I_OUT_COEFF_N		0
-#define STB0899_WIDTH_EQ_I_OUT_COEFF_N		12
-
-#define STB0899_OFF0_EQ_Q_OUT_COEFF_0		0xf330
-#define STB0899_OFF1_EQ_Q_OUT_COEFF_1		0xf334
-#define STB0899_OFF2_EQ_Q_OUT_COEFF_2		0xf338
-#define STB0899_OFF3_EQ_Q_OUT_COEFF_3		0xf33c
-#define STB0899_OFF4_EQ_Q_OUT_COEFF_4		0xf340
-#define STB0899_OFF5_EQ_Q_OUT_COEFF_5		0xf344
-#define STB0899_OFF6_EQ_Q_OUT_COEFF_6		0xf348
-#define STB0899_OFF7_EQ_Q_OUT_COEFF_7		0xf34c
-#define STB0899_OFF8_EQ_Q_OUT_COEFF_8		0xf350
-#define STB0899_OFF9_EQ_Q_OUT_COEFF_9		0xf354
-#define STB0899_OFFa_EQ_Q_OUT_COEFF_10		0xf358
-#define STB0899_BASE_EQ_Q_OUT_COEFF_N		0x00000460
-#define STB0899_EQ_Q_OUT_COEFF_N		(0x0fff << 0)
-#define STB0899_OFFST_EQ_Q_OUT_COEFF_N		0
-#define STB0899_WIDTH_EQ_Q_OUT_COEFF_N		12
-
-/*	S2 FEC	*/
-#define STB0899_OFF0_BLOCK_LNGTH		0xfa04
-#define STB0899_BASE_BLOCK_LNGTH		0x00000000
-#define STB0899_BLOCK_LENGTH			(0xff << 0)
-#define STB0899_OFFST_BLOCK_LENGTH		0
-#define STB0899_WIDTH_BLOCK_LENGTH		8
-
-#define STB0899_OFF0_ROW_STR			0xfa08
-#define STB0899_BASE_ROW_STR			0x00000000
-#define STB0899_ROW_STRIDE			(0xff << 0)
-#define STB0899_OFFST_ROW_STRIDE		0
-#define STB0899_WIDTH_ROW_STRIDE		8
-
-#define STB0899_OFF0_MAX_ITER			0xfa0c
-#define STB0899_BASE_MAX_ITER			0x00000000
-#define STB0899_MAX_ITERATIONS			(0xff << 0)
-#define STB0899_OFFST_MAX_ITERATIONS		0
-#define STB0899_WIDTH_MAX_ITERATIONS		8
-
-#define STB0899_OFF0_BN_END_ADDR		0xfa10
-#define STB0899_BASE_BN_END_ADDR		0x00000000
-#define STB0899_BN_END_ADDR			(0x0fff << 0)
-#define STB0899_OFFST_BN_END_ADDR		0
-#define STB0899_WIDTH_BN_END_ADDR		12
-
-#define STB0899_OFF0_CN_END_ADDR		0xfa14
-#define STB0899_BASE_CN_END_ADDR		0x00000000
-#define STB0899_CN_END_ADDR			(0x0fff << 0)
-#define STB0899_OFFST_CN_END_ADDR		0
-#define STB0899_WIDTH_CN_END_ADDR		12
-
-#define STB0899_OFF0_INFO_LENGTH		0xfa1c
-#define STB0899_BASE_INFO_LENGTH		0x00000000
-#define STB0899_INFO_LENGTH			(0xff << 0)
-#define STB0899_OFFST_INFO_LENGTH		0
-#define STB0899_WIDTH_INFO_LENGTH		8
-
-#define STB0899_OFF0_BOT_ADDR			0xfa20
-#define STB0899_BASE_BOT_ADDR			0x00000000
-#define STB0899_BOTTOM_BASE_ADDR		(0x03ff << 0)
-#define STB0899_OFFST_BOTTOM_BASE_ADDR		0
-#define STB0899_WIDTH_BOTTOM_BASE_ADDR		10
-
-#define STB0899_OFF0_BCH_BLK_LN			0xfa24
-#define STB0899_BASE_BCH_BLK_LN			0x00000000
-#define STB0899_BCH_BLOCK_LENGTH		(0xffff << 0)
-#define STB0899_OFFST_BCH_BLOCK_LENGTH		0
-#define STB0899_WIDTH_BCH_BLOCK_LENGTH		16
-
-#define STB0899_OFF0_BCH_T			0xfa28
-#define STB0899_BASE_BCH_T			0x00000000
-#define STB0899_BCH_T				(0x0f << 0)
-#define STB0899_OFFST_BCH_T			0
-#define STB0899_WIDTH_BCH_T			4
-
-#define STB0899_OFF0_CNFG_MODE			0xfa00
-#define STB0899_BASE_CNFG_MODE			0x00000800
-#define STB0899_MODCOD				(0x1f << 2)
-#define STB0899_OFFST_MODCOD			2
-#define STB0899_WIDTH_MODCOD			5
-#define STB0899_MODCOD_SEL			(0x01 << 1)
-#define STB0899_OFFST_MODCOD_SEL		1
-#define STB0899_WIDTH_MODCOD_SEL		1
-#define STB0899_CONFIG_MODE			(0x01 << 0)
-#define STB0899_OFFST_CONFIG_MODE		0
-#define STB0899_WIDTH_CONFIG_MODE		1
-
-#define STB0899_OFF0_LDPC_STAT			0xfa04
-#define STB0899_BASE_LDPC_STAT			0x00000800
-#define STB0899_ITERATION			(0xff << 3)
-#define STB0899_OFFST_ITERATION			3
-#define STB0899_WIDTH_ITERATION			8
-#define STB0899_LDPC_DEC_STATE			(0x07 << 0)
-#define STB0899_OFFST_LDPC_DEC_STATE		0
-#define STB0899_WIDTH_LDPC_DEC_STATE		3
-
-#define STB0899_OFF0_ITER_SCALE			0xfa08
-#define STB0899_BASE_ITER_SCALE			0x00000800
-#define STB0899_ITERATION_SCALE			(0xff << 0)
-#define STB0899_OFFST_ITERATION_SCALE		0
-#define STB0899_WIDTH_ITERATION_SCALE		8
-
-#define STB0899_OFF0_INPUT_MODE			0xfa0c
-#define STB0899_BASE_INPUT_MODE			0x00000800
-#define STB0899_SD_BLOCK1_STREAM0		(0x01 << 0)
-#define STB0899_OFFST_SD_BLOCK1_STREAM0		0
-#define STB0899_WIDTH_SD_BLOCK1_STREAM0		1
-
-#define STB0899_OFF0_LDPCDECRST			0xfa10
-#define STB0899_BASE_LDPCDECRST			0x00000800
-#define STB0899_LDPC_DEC_RST			(0x01 << 0)
-#define STB0899_OFFST_LDPC_DEC_RST		0
-#define STB0899_WIDTH_LDPC_DEC_RST		1
-
-#define STB0899_OFF0_CLK_PER_BYTE_RW		0xfa14
-#define STB0899_BASE_CLK_PER_BYTE_RW		0x00000800
-#define STB0899_CLKS_PER_BYTE			(0x0f << 0)
-#define STB0899_OFFST_CLKS_PER_BYTE		0
-#define STB0899_WIDTH_CLKS_PER_BYTE		5
-
-#define STB0899_OFF0_BCH_ERRORS			0xfa18
-#define STB0899_BASE_BCH_ERRORS			0x00000800
-#define STB0899_BCH_ERRORS			(0x0f << 0)
-#define STB0899_OFFST_BCH_ERRORS		0
-#define STB0899_WIDTH_BCH_ERRORS		4
-
-#define STB0899_OFF0_LDPC_ERRORS		0xfa1c
-#define STB0899_BASE_LDPC_ERRORS		0x00000800
-#define STB0899_LDPC_ERRORS			(0xffff << 0)
-#define STB0899_OFFST_LDPC_ERRORS		0
-#define STB0899_WIDTH_LDPC_ERRORS		16
-
-#define STB0899_OFF0_BCH_MODE			0xfa20
-#define STB0899_BASE_BCH_MODE			0x00000800
-#define STB0899_BCH_CORRECT_N			(0x01 << 1)
-#define STB0899_OFFST_BCH_CORRECT_N		1
-#define STB0899_WIDTH_BCH_CORRECT_N		1
-#define STB0899_FULL_BYPASS			(0x01 << 0)
-#define STB0899_OFFST_FULL_BYPASS		0
-#define STB0899_WIDTH_FULL_BYPASS		1
-
-#define STB0899_OFF0_ERR_ACC_PER		0xfa24
-#define STB0899_BASE_ERR_ACC_PER		0x00000800
-#define STB0899_BCH_ERR_ACC_PERIOD		(0x0f << 0)
-#define STB0899_OFFST_BCH_ERR_ACC_PERIOD	0
-#define STB0899_WIDTH_BCH_ERR_ACC_PERIOD	4
-
-#define STB0899_OFF0_BCH_ERR_ACC		0xfa28
-#define STB0899_BASE_BCH_ERR_ACC		0x00000800
-#define STB0899_BCH_ERR_ACCUM			(0xff << 0)
-#define STB0899_OFFST_BCH_ERR_ACCUM		0
-#define STB0899_WIDTH_BCH_ERR_ACCUM		8
-
-#define STB0899_OFF0_FEC_CORE_ID_REG		0xfa2c
-#define STB0899_BASE_FEC_CORE_ID_REG		0x00000800
-#define STB0899_FEC_CORE_ID			(0xffffffff << 0)
-#define STB0899_OFFST_FEC_CORE_ID		0
-#define STB0899_WIDTH_FEC_CORE_ID		32
-
-#define STB0899_OFF0_FEC_VER_ID_REG		0xfa34
-#define STB0899_BASE_FEC_VER_ID_REG		0x00000800
-#define STB0899_FEC_VER_ID			(0xff << 0)
-#define STB0899_OFFST_FEC_VER_ID		0
-#define STB0899_WIDTH_FEC_VER_ID		8
-
-#define STB0899_OFF0_FEC_TP_SEL			0xfa38
-#define STB0899_BASE_FEC_TP_SEL			0x00000800
-
-#define STB0899_OFF0_CSM_CNTRL1			0xf310
-#define STB0899_BASE_CSM_CNTRL1			0x00000400
-#define STB0899_CSM_FORCE_FREQLOCK		(0x01 << 19)
-#define STB0899_OFFST_CSM_FORCE_FREQLOCK	19
-#define STB0899_WIDTH_CSM_FORCE_FREQLOCK	1
-#define STB0899_CSM_FREQ_LOCKSTATE		(0x01 << 18)
-#define STB0899_OFFST_CSM_FREQ_LOCKSTATE	18
-#define STB0899_WIDTH_CSM_FREQ_LOCKSTATE	1
-#define STB0899_CSM_AUTO_PARAM			(0x01 << 17)
-#define STB0899_OFFST_CSM_AUTO_PARAM		17
-#define STB0899_WIDTH_CSM_AUTO_PARAM		1
-#define STB0899_FE_LOOP_SHIFT			(0x07 << 14)
-#define STB0899_OFFST_FE_LOOP_SHIFT		14
-#define STB0899_WIDTH_FE_LOOP_SHIFT		3
-#define STB0899_CSM_AGC_SHIFT			(0x07 << 11)
-#define STB0899_OFFST_CSM_AGC_SHIFT		11
-#define STB0899_WIDTH_CSM_AGC_SHIFT		3
-#define STB0899_CSM_AGC_GAIN			(0x1ff << 2)
-#define STB0899_OFFST_CSM_AGC_GAIN		2
-#define STB0899_WIDTH_CSM_AGC_GAIN		9
-#define STB0899_CSM_TWO_PASS			(0x01 << 1)
-#define STB0899_OFFST_CSM_TWO_PASS		1
-#define STB0899_WIDTH_CSM_TWO_PASS		1
-#define STB0899_CSM_DVT_TABLE			(0x01 << 0)
-#define STB0899_OFFST_CSM_DVT_TABLE		0
-#define STB0899_WIDTH_CSM_DVT_TABLE		1
-
-#define STB0899_OFF0_CSM_CNTRL2			0xf314
-#define STB0899_BASE_CSM_CNTRL2			0x00000400
-#define STB0899_CSM_GAMMA_RHO_ACQ		(0x1ff << 9)
-#define STB0899_OFFST_CSM_GAMMA_RHOACQ		9
-#define STB0899_WIDTH_CSM_GAMMA_RHOACQ		9
-#define STB0899_CSM_GAMMA_ACQ			(0x1ff << 0)
-#define STB0899_OFFST_CSM_GAMMA_ACQ		0
-#define STB0899_WIDTH_CSM_GAMMA_ACQ		9
-
-#define STB0899_OFF0_CSM_CNTRL3			0xf318
-#define STB0899_BASE_CSM_CNTRL3			0x00000400
-#define STB0899_CSM_GAMMA_RHO_TRACK		(0x1ff << 9)
-#define STB0899_OFFST_CSM_GAMMA_RHOTRACK	9
-#define STB0899_WIDTH_CSM_GAMMA_RHOTRACK	9
-#define STB0899_CSM_GAMMA_TRACK			(0x1ff << 0)
-#define STB0899_OFFST_CSM_GAMMA_TRACK		0
-#define STB0899_WIDTH_CSM_GAMMA_TRACK		9
-
-#define STB0899_OFF0_CSM_CNTRL4			0xf31c
-#define STB0899_BASE_CSM_CNTRL4			0x00000400
-#define STB0899_CSM_PHASEDIFF_THRESH		(0x0f << 8)
-#define STB0899_OFFST_CSM_PHASEDIFF_THRESH	8
-#define STB0899_WIDTH_CSM_PHASEDIFF_THRESH	4
-#define STB0899_CSM_LOCKCOUNT_THRESH		(0xff << 0)
-#define STB0899_OFFST_CSM_LOCKCOUNT_THRESH	0
-#define STB0899_WIDTH_CSM_LOCKCOUNT_THRESH	8
-
-/*	Check on chapter 8 page 42	*/
-#define STB0899_ERRCTRL1			0xf574
-#define STB0899_ERRCTRL2			0xf575
-#define STB0899_ERRCTRL3			0xf576
-#define STB0899_ERR_SRC_S1			(0x1f << 3)
-#define STB0899_OFFST_ERR_SRC_S1		3
-#define STB0899_WIDTH_ERR_SRC_S1		5
-#define STB0899_ERR_SRC_S2			(0x0f << 0)
-#define STB0899_OFFST_ERR_SRC_S2		0
-#define STB0899_WIDTH_ERR_SRC_S2		4
-#define STB0899_NOE				(0x07 << 0)
-#define STB0899_OFFST_NOE			0
-#define STB0899_WIDTH_NOE			3
-
-#define STB0899_ECNT1M				0xf524
-#define STB0899_ECNT1L				0xf525
-#define STB0899_ECNT2M				0xf526
-#define STB0899_ECNT2L				0xf527
-#define STB0899_ECNT3M				0xf528
-#define STB0899_ECNT3L				0xf529
-
-#define STB0899_DMONMSK1			0xf57b
-#define STB0899_DMONMSK1_WAIT_1STEP		(1 << 7)
-#define STB0899_DMONMSK1_FREE_14		(1 << 6)
-#define STB0899_DMONMSK1_AVRGVIT_CALC		(1 << 5)
-#define STB0899_DMONMSK1_FREE_12		(1 << 4)
-#define STB0899_DMONMSK1_FREE_11		(1 << 3)
-#define STB0899_DMONMSK1_B0DIV_CALC		(1 << 2)
-#define STB0899_DMONMSK1_KDIVB1_CALC		(1 << 1)
-#define STB0899_DMONMSK1_KDIVB2_CALC		(1 << 0)
-
-#define STB0899_DMONMSK0			0xf57c
-#define STB0899_DMONMSK0_SMOTTH_CALC		(1 << 7)
-#define STB0899_DMONMSK0_FREE_6			(1 << 6)
-#define STB0899_DMONMSK0_SIGPOWER_CALC		(1 << 5)
-#define STB0899_DMONMSK0_QSEUIL_CALC		(1 << 4)
-#define STB0899_DMONMSK0_FREE_3			(1 << 3)
-#define STB0899_DMONMSK0_FREE_2			(1 << 2)
-#define STB0899_DMONMSK0_KVDIVB1_CALC		(1 << 1)
-#define STB0899_DMONMSK0_KVDIVB2_CALC		(1 << 0)
-
-#define STB0899_TSULC				0xf549
-#define STB0899_ULNOSYNCBYTES			(0x01 << 7)
-#define STB0899_OFFST_ULNOSYNCBYTES		7
-#define STB0899_WIDTH_ULNOSYNCBYTES		1
-#define STB0899_ULPARITY_ON			(0x01 << 6)
-#define STB0899_OFFST_ULPARITY_ON		6
-#define STB0899_WIDTH_ULPARITY_ON		1
-#define STB0899_ULSYNCOUTRS			(0x01 << 5)
-#define STB0899_OFFST_ULSYNCOUTRS		5
-#define STB0899_WIDTH_ULSYNCOUTRS		1
-#define STB0899_ULDSS_PACKETS			(0x01 << 0)
-#define STB0899_OFFST_ULDSS_PACKETS		0
-#define STB0899_WIDTH_ULDSS_PACKETS		1
-
-#define STB0899_TSLPL				0xf54b
-#define STB0899_LLDVBS2_MODE			(0x01 << 4)
-#define STB0899_OFFST_LLDVBS2_MODE		4
-#define STB0899_WIDTH_LLDVBS2_MODE		1
-#define STB0899_LLISSYI_ON			(0x01 << 3)
-#define STB0899_OFFST_LLISSYI_ON		3
-#define STB0899_WIDTH_LLISSYI_ON		1
-#define STB0899_LLNPD_ON			(0x01 << 2)
-#define STB0899_OFFST_LLNPD_ON			2
-#define STB0899_WIDTH_LLNPD_ON			1
-#define STB0899_LLCRC8_ON			(0x01 << 1)
-#define STB0899_OFFST_LLCRC8_ON			1
-#define STB0899_WIDTH_LLCRC8_ON			1
-
-#define STB0899_TSCFGH				0xf54c
-#define STB0899_OUTRS_PS			(0x01 << 6)
-#define STB0899_OFFST_OUTRS_PS			6
-#define STB0899_WIDTH_OUTRS_PS			1
-#define STB0899_SYNCBYTE			(0x01 << 5)
-#define STB0899_OFFST_SYNCBYTE			5
-#define STB0899_WIDTH_SYNCBYTE			1
-#define STB0899_PFBIT				(0x01 << 4)
-#define STB0899_OFFST_PFBIT			4
-#define STB0899_WIDTH_PFBIT			1
-#define STB0899_ERR_BIT				(0x01 << 3)
-#define STB0899_OFFST_ERR_BIT			3
-#define STB0899_WIDTH_ERR_BIT			1
-#define STB0899_MPEG				(0x01 << 2)
-#define STB0899_OFFST_MPEG			2
-#define STB0899_WIDTH_MPEG			1
-#define STB0899_CLK_POL				(0x01 << 1)
-#define STB0899_OFFST_CLK_POL			1
-#define STB0899_WIDTH_CLK_POL			1
-#define STB0899_FORCE0				(0x01 << 0)
-#define STB0899_OFFST_FORCE0			0
-#define STB0899_WIDTH_FORCE0			1
-
-#define STB0899_TSCFGM				0xf54d
-#define STB0899_LLPRIORITY			(0x01 << 3)
-#define STB0899_OFFST_LLPRIORIY			3
-#define STB0899_WIDTH_LLPRIORITY		1
-#define STB0899_EN188				(0x01 << 2)
-#define STB0899_OFFST_EN188			2
-#define STB0899_WIDTH_EN188			1
-
-#define STB0899_TSCFGL				0xf54e
-#define STB0899_DEL_ERRPCK			(0x01 << 7)
-#define STB0899_OFFST_DEL_ERRPCK		7
-#define STB0899_WIDTH_DEL_ERRPCK		1
-#define STB0899_ERRFLAGSTD			(0x01 << 5)
-#define STB0899_OFFST_ERRFLAGSTD		5
-#define STB0899_WIDTH_ERRFLAGSTD		1
-#define STB0899_MPEGERR				(0x01 << 4)
-#define STB0899_OFFST_MPEGERR			4
-#define STB0899_WIDTH_MPEGERR			1
-#define STB0899_BCH_CHK				(0x01 << 3)
-#define STB0899_OFFST_BCH_CHK			5
-#define STB0899_WIDTH_BCH_CHK			1
-#define STB0899_CRC8CHK				(0x01 << 2)
-#define STB0899_OFFST_CRC8CHK			2
-#define STB0899_WIDTH_CRC8CHK			1
-#define STB0899_SPEC_INFO			(0x01 << 1)
-#define STB0899_OFFST_SPEC_INFO			1
-#define STB0899_WIDTH_SPEC_INFO			1
-#define STB0899_LOW_PRIO_CLK			(0x01 << 0)
-#define STB0899_OFFST_LOW_PRIO_CLK		0
-#define STB0899_WIDTH_LOW_PRIO_CLK		1
-#define STB0899_ERROR_NORM			(0x00 << 0)
-#define STB0899_OFFST_ERROR_NORM		0
-#define STB0899_WIDTH_ERROR_NORM		0
-
-#define STB0899_TSOUT				0xf54f
-#define STB0899_RSSYNCDEL			0xf550
-#define STB0899_TSINHDELH			0xf551
-#define STB0899_TSINHDELM			0xf552
-#define STB0899_TSINHDELL			0xf553
-#define STB0899_TSLLSTKM			0xf55a
-#define STB0899_TSLLSTKL			0xf55b
-#define STB0899_TSULSTKM			0xf55c
-#define STB0899_TSULSTKL			0xf55d
-#define STB0899_TSSTATUS			0xf561
-
-#define STB0899_PDELCTRL			0xf600
-#define STB0899_INVERT_RES			(0x01 << 7)
-#define STB0899_OFFST_INVERT_RES		7
-#define STB0899_WIDTH_INVERT_RES		1
-#define STB0899_FORCE_ACCEPTED			(0x01 << 6)
-#define STB0899_OFFST_FORCE_ACCEPTED		6
-#define STB0899_WIDTH_FORCE_ACCEPTED		1
-#define STB0899_FILTER_EN			(0x01 << 5)
-#define STB0899_OFFST_FILTER_EN			5
-#define STB0899_WIDTH_FILTER_EN			1
-#define STB0899_LOCKFALL_THRESH			(0x01 << 4)
-#define STB0899_OFFST_LOCKFALL_THRESH		4
-#define STB0899_WIDTH_LOCKFALL_THRESH		1
-#define STB0899_HYST_EN				(0x01 << 3)
-#define STB0899_OFFST_HYST_EN			3
-#define STB0899_WIDTH_HYST_EN			1
-#define STB0899_HYST_SWRST			(0x01 << 2)
-#define STB0899_OFFST_HYST_SWRST		2
-#define STB0899_WIDTH_HYST_SWRST		1
-#define STB0899_ALGO_EN				(0x01 << 1)
-#define STB0899_OFFST_ALGO_EN			1
-#define STB0899_WIDTH_ALGO_EN			1
-#define STB0899_ALGO_SWRST			(0x01 << 0)
-#define STB0899_OFFST_ALGO_SWRST		0
-#define STB0899_WIDTH_ALGO_SWRST		1
-
-#define STB0899_PDELCTRL2			0xf601
-#define STB0899_BBHCTRL1			0xf602
-#define STB0899_BBHCTRL2			0xf603
-#define STB0899_HYSTTHRESH			0xf604
-
-#define STB0899_MATCSTM				0xf605
-#define STB0899_MATCSTL				0xf606
-#define STB0899_UPLCSTM				0xf607
-#define STB0899_UPLCSTL				0xf608
-#define STB0899_DFLCSTM				0xf609
-#define STB0899_DFLCSTL				0xf60a
-#define STB0899_SYNCCST				0xf60b
-#define STB0899_SYNCDCSTM			0xf60c
-#define STB0899_SYNCDCSTL			0xf60d
-#define STB0899_ISI_ENTRY			0xf60e
-#define STB0899_ISI_BIT_EN			0xf60f
-#define STB0899_MATSTRM				0xf610
-#define STB0899_MATSTRL				0xf611
-#define STB0899_UPLSTRM				0xf612
-#define STB0899_UPLSTRL				0xf613
-#define STB0899_DFLSTRM				0xf614
-#define STB0899_DFLSTRL				0xf615
-#define STB0899_SYNCSTR				0xf616
-#define STB0899_SYNCDSTRM			0xf617
-#define STB0899_SYNCDSTRL			0xf618
-
-#define STB0899_CFGPDELSTATUS1			0xf619
-#define STB0899_BADDFL				(0x01 << 6)
-#define STB0899_OFFST_BADDFL			6
-#define STB0899_WIDTH_BADDFL			1
-#define STB0899_CONTINUOUS_STREAM		(0x01 << 5)
-#define STB0899_OFFST_CONTINUOUS_STREAM		5
-#define STB0899_WIDTH_CONTINUOUS_STREAM		1
-#define STB0899_ACCEPTED_STREAM			(0x01 << 4)
-#define STB0899_OFFST_ACCEPTED_STREAM		4
-#define STB0899_WIDTH_ACCEPTED_STREAM		1
-#define STB0899_BCH_ERRFLAG			(0x01 << 3)
-#define STB0899_OFFST_BCH_ERRFLAG		3
-#define STB0899_WIDTH_BCH_ERRFLAG		1
-#define STB0899_CRCRES				(0x01 << 2)
-#define STB0899_OFFST_CRCRES			2
-#define STB0899_WIDTH_CRCRES			1
-#define STB0899_CFGPDELSTATUS_LOCK		(0x01 << 1)
-#define STB0899_OFFST_CFGPDELSTATUS_LOCK	1
-#define STB0899_WIDTH_CFGPDELSTATUS_LOCK	1
-#define STB0899_1STLOCK				(0x01 << 0)
-#define STB0899_OFFST_1STLOCK			0
-#define STB0899_WIDTH_1STLOCK			1
-
-#define STB0899_CFGPDELSTATUS2			0xf61a
-#define STB0899_BBFERRORM			0xf61b
-#define STB0899_BBFERRORL			0xf61c
-#define STB0899_UPKTERRORM			0xf61d
-#define STB0899_UPKTERRORL			0xf61e
-
-#define STB0899_TSTCK				0xff10
-
-#define STB0899_TSTRES				0xff11
-#define STB0899_FRESLDPC			(0x01 << 7)
-#define STB0899_OFFST_FRESLDPC			7
-#define STB0899_WIDTH_FRESLDPC			1
-#define STB0899_FRESRS				(0x01 << 6)
-#define STB0899_OFFST_FRESRS			6
-#define STB0899_WIDTH_FRESRS			1
-#define STB0899_FRESVIT				(0x01 << 5)
-#define STB0899_OFFST_FRESVIT			5
-#define STB0899_WIDTH_FRESVIT			1
-#define STB0899_FRESMAS1_2			(0x01 << 4)
-#define STB0899_OFFST_FRESMAS1_2		4
-#define STB0899_WIDTH_FRESMAS1_2		1
-#define STB0899_FRESACS				(0x01 << 3)
-#define STB0899_OFFST_FRESACS			3
-#define STB0899_WIDTH_FRESACS			1
-#define STB0899_FRESSYM				(0x01 << 2)
-#define STB0899_OFFST_FRESSYM			2
-#define STB0899_WIDTH_FRESSYM			1
-#define STB0899_FRESMAS				(0x01 << 1)
-#define STB0899_OFFST_FRESMAS			1
-#define STB0899_WIDTH_FRESMAS			1
-#define STB0899_FRESINT				(0x01 << 0)
-#define STB0899_OFFST_FRESINIT			0
-#define STB0899_WIDTH_FRESINIT			1
-
-#define STB0899_TSTOUT				0xff12
-#define STB0899_EN_SIGNATURE			(0x01 << 7)
-#define STB0899_OFFST_EN_SIGNATURE		7
-#define STB0899_WIDTH_EN_SIGNATURE		1
-#define STB0899_BCLK_CLK			(0x01 << 6)
-#define STB0899_OFFST_BCLK_CLK			6
-#define STB0899_WIDTH_BCLK_CLK			1
-#define STB0899_SGNL_OUT			(0x01 << 5)
-#define STB0899_OFFST_SGNL_OUT			5
-#define STB0899_WIDTH_SGNL_OUT			1
-#define STB0899_TS				(0x01 << 4)
-#define STB0899_OFFST_TS			4
-#define STB0899_WIDTH_TS			1
-#define STB0899_CTEST				(0x01 << 0)
-#define STB0899_OFFST_CTEST			0
-#define STB0899_WIDTH_CTEST			1
-
-#define STB0899_TSTIN				0xff13
-#define STB0899_TEST_IN				(0x01 << 7)
-#define STB0899_OFFST_TEST_IN			7
-#define STB0899_WIDTH_TEST_IN			1
-#define STB0899_EN_ADC				(0x01 << 6)
-#define STB0899_OFFST_EN_ADC			6
-#define STB0899_WIDTH_ENADC			1
-#define STB0899_SGN_ADC				(0x01 << 5)
-#define STB0899_OFFST_SGN_ADC			5
-#define STB0899_WIDTH_SGN_ADC			1
-#define STB0899_BCLK_IN				(0x01 << 4)
-#define STB0899_OFFST_BCLK_IN			4
-#define STB0899_WIDTH_BCLK_IN			1
-#define STB0899_JETONIN_MODE			(0x01 << 3)
-#define STB0899_OFFST_JETONIN_MODE		3
-#define STB0899_WIDTH_JETONIN_MODE		1
-#define STB0899_BCLK_VALUE			(0x01 << 2)
-#define STB0899_OFFST_BCLK_VALUE		2
-#define STB0899_WIDTH_BCLK_VALUE		1
-#define STB0899_SGNRST_T12			(0x01 << 1)
-#define STB0899_OFFST_SGNRST_T12		1
-#define STB0899_WIDTH_SGNRST_T12		1
-#define STB0899_LOWSP_ENAX			(0x01 << 0)
-#define STB0899_OFFST_LOWSP_ENAX		0
-#define STB0899_WIDTH_LOWSP_ENAX		1
-
-#define STB0899_TSTSYS				0xff14
-#define STB0899_TSTCHIP				0xff15
-#define STB0899_TSTFREE				0xff16
-#define STB0899_TSTI2C				0xff17
-#define STB0899_BITSPEEDM			0xff1c
-#define STB0899_BITSPEEDL			0xff1d
-#define STB0899_TBUSBIT				0xff1e
-#define STB0899_TSTDIS				0xff24
-#define STB0899_TSTDISRX			0xff25
-#define STB0899_TSTJETON			0xff28
-#define STB0899_TSTDCADJ			0xff40
-#define STB0899_TSTAGC1				0xff41
-#define STB0899_TSTAGC1N			0xff42
-#define STB0899_TSTPOLYPH			0xff48
-#define STB0899_TSTR				0xff49
-#define STB0899_TSTAGC2				0xff4a
-#define STB0899_TSTCTL1				0xff4b
-#define STB0899_TSTCTL2				0xff4c
-#define STB0899_TSTCTL3				0xff4d
-#define STB0899_TSTDEMAP			0xff50
-#define STB0899_TSTDEMAP2			0xff51
-#define STB0899_TSTDEMMON			0xff52
-#define STB0899_TSTRATE				0xff53
-#define STB0899_TSTSELOUT			0xff54
-#define STB0899_TSYNC				0xff55
-#define STB0899_TSTERR				0xff56
-#define STB0899_TSTRAM1				0xff58
-#define STB0899_TSTVSELOUT			0xff59
-#define STB0899_TSTFORCEIN			0xff5a
-#define STB0899_TSTRS1				0xff5c
-#define STB0899_TSTRS2				0xff5d
-#define STB0899_TSTRS3				0xff53
-
-#define STB0899_INTBUFSTATUS			0xf200
-#define STB0899_INTBUFCTRL			0xf201
-#define STB0899_PCKLENUL			0xf55e
-#define STB0899_PCKLENLL			0xf55f
-#define STB0899_RSPCKLEN			0xf560
-
-/*	2 registers	*/
-#define STB0899_SYNCDCST			0xf60c
-
-/*	DiSEqC	*/
-#define STB0899_DISCNTRL1			0xf0a0
-#define STB0899_TIMOFF				(0x01 << 7)
-#define STB0899_OFFST_TIMOFF			7
-#define STB0899_WIDTH_TIMOFF			1
-#define STB0899_DISEQCRESET			(0x01 << 6)
-#define STB0899_OFFST_DISEQCRESET		6
-#define STB0899_WIDTH_DISEQCRESET		1
-#define STB0899_TIMCMD				(0x03 << 4)
-#define STB0899_OFFST_TIMCMD			4
-#define STB0899_WIDTH_TIMCMD			2
-#define STB0899_DISPRECHARGE			(0x01 << 2)
-#define STB0899_OFFST_DISPRECHARGE		2
-#define STB0899_WIDTH_DISPRECHARGE		1
-#define STB0899_DISEQCMODE			(0x03 << 0)
-#define STB0899_OFFST_DISEQCMODE		0
-#define STB0899_WIDTH_DISEQCMODE		2
-
-#define STB0899_DISCNTRL2			0xf0a1
-#define STB0899_RECEIVER_ON			(0x01 << 7)
-#define STB0899_OFFST_RECEIVER_ON		7
-#define STB0899_WIDTH_RECEIVER_ON		1
-#define STB0899_IGNO_SHORT_22K			(0x01 << 6)
-#define STB0899_OFFST_IGNO_SHORT_22K		6
-#define STB0899_WIDTH_IGNO_SHORT_22K		1
-#define STB0899_ONECHIP_TRX			(0x01 << 5)
-#define STB0899_OFFST_ONECHIP_TRX		5
-#define STB0899_WIDTH_ONECHIP_TRX		1
-#define STB0899_EXT_ENVELOP			(0x01 << 4)
-#define STB0899_OFFST_EXT_ENVELOP		4
-#define STB0899_WIDTH_EXT_ENVELOP		1
-#define STB0899_PIN_SELECT			(0x03 << 2)
-#define STB0899_OFFST_PIN_SELCT			2
-#define STB0899_WIDTH_PIN_SELCT			2
-#define STB0899_IRQ_RXEND			(0x01 << 1)
-#define STB0899_OFFST_IRQ_RXEND			1
-#define STB0899_WIDTH_IRQ_RXEND			1
-#define STB0899_IRQ_4NBYTES			(0x01 << 0)
-#define STB0899_OFFST_IRQ_4NBYTES		0
-#define STB0899_WIDTH_IRQ_4NBYTES		1
-
-#define STB0899_DISRX_ST0			0xf0a4
-#define STB0899_RXEND				(0x01 << 7)
-#define STB0899_OFFST_RXEND			7
-#define STB0899_WIDTH_RXEND			1
-#define STB0899_RXACTIVE			(0x01 << 6)
-#define STB0899_OFFST_RXACTIVE			6
-#define STB0899_WIDTH_RXACTIVE			1
-#define STB0899_SHORT22K			(0x01 << 5)
-#define STB0899_OFFST_SHORT22K			5
-#define STB0899_WIDTH_SHORT22K			1
-#define STB0899_CONTTONE			(0x01 << 4)
-#define STB0899_OFFST_CONTTONE			4
-#define STB0899_WIDTH_CONTONE			1
-#define STB0899_4BFIFOREDY			(0x01 << 3)
-#define STB0899_OFFST_4BFIFOREDY		3
-#define STB0899_WIDTH_4BFIFOREDY		1
-#define STB0899_FIFOEMPTY			(0x01 << 2)
-#define STB0899_OFFST_FIFOEMPTY			2
-#define STB0899_WIDTH_FIFOEMPTY			1
-#define STB0899_ABORTTRX			(0x01 << 0)
-#define STB0899_OFFST_ABORTTRX			0
-#define STB0899_WIDTH_ABORTTRX			1
-
-#define STB0899_DISRX_ST1			0xf0a5
-#define STB0899_RXFAIL				(0x01 << 7)
-#define STB0899_OFFST_RXFAIL			7
-#define STB0899_WIDTH_RXFAIL			1
-#define STB0899_FIFOPFAIL			(0x01 << 6)
-#define STB0899_OFFST_FIFOPFAIL			6
-#define STB0899_WIDTH_FIFOPFAIL			1
-#define STB0899_RXNONBYTES			(0x01 << 5)
-#define STB0899_OFFST_RXNONBYTES		5
-#define STB0899_WIDTH_RXNONBYTES		1
-#define STB0899_FIFOOVF				(0x01 << 4)
-#define STB0899_OFFST_FIFOOVF			4
-#define STB0899_WIDTH_FIFOOVF			1
-#define STB0899_FIFOBYTENBR			(0x0f << 0)
-#define STB0899_OFFST_FIFOBYTENBR		0
-#define STB0899_WIDTH_FIFOBYTENBR		4
-
-#define STB0899_DISPARITY			0xf0a6
-
-#define STB0899_DISFIFO				0xf0a7
-
-#define STB0899_DISSTATUS			0xf0a8
-#define STB0899_FIFOFULL			(0x01 << 6)
-#define STB0899_OFFST_FIFOFULL			6
-#define STB0899_WIDTH_FIFOFULL			1
-#define STB0899_TXIDLE				(0x01 << 5)
-#define STB0899_OFFST_TXIDLE			5
-#define STB0899_WIDTH_TXIDLE			1
-#define STB0899_GAPBURST			(0x01 << 4)
-#define STB0899_OFFST_GAPBURST			4
-#define STB0899_WIDTH_GAPBURST			1
-#define STB0899_TXFIFOBYTES			(0x0f << 0)
-#define STB0899_OFFST_TXFIFOBYTES		0
-#define STB0899_WIDTH_TXFIFOBYTES		4
-#define STB0899_DISF22				0xf0a9
-
-#define STB0899_DISF22RX			0xf0aa
-
-/*	General Purpose	*/
-#define STB0899_SYSREG				0xf101
-#define STB0899_ACRPRESC			0xf110
-#define STB0899_OFFST_RSVD2			7
-#define STB0899_WIDTH_RSVD2			1
-#define STB0899_OFFST_ACRPRESC			4
-#define STB0899_WIDTH_ACRPRESC			3
-#define STB0899_OFFST_RSVD1			3
-#define STB0899_WIDTH_RSVD1			1
-#define STB0899_OFFST_ACRPRESC2			0
-#define STB0899_WIDTH_ACRPRESC2			3
-
-#define STB0899_ACRDIV1				0xf111
-#define STB0899_ACRDIV2				0xf112
-#define STB0899_DACR1				0xf113
-#define STB0899_DACR2				0xf114
-#define STB0899_OUTCFG				0xf11c
-#define STB0899_MODECFG				0xf11d
-#define STB0899_NCOARSE				0xf1b3
-
-#define STB0899_SYNTCTRL			0xf1b6
-#define STB0899_STANDBY				(0x01 << 7)
-#define STB0899_OFFST_STANDBY			7
-#define STB0899_WIDTH_STANDBY			1
-#define STB0899_BYPASSPLL			(0x01 << 6)
-#define STB0899_OFFST_BYPASSPLL			6
-#define STB0899_WIDTH_BYPASSPLL			1
-#define STB0899_SEL1XRATIO			(0x01 << 5)
-#define STB0899_OFFST_SEL1XRATIO		5
-#define STB0899_WIDTH_SEL1XRATIO		1
-#define STB0899_SELOSCI				(0x01 << 1)
-#define STB0899_OFFST_SELOSCI			1
-#define STB0899_WIDTH_SELOSCI			1
-
-#define STB0899_FILTCTRL			0xf1b7
-#define STB0899_SYSCTRL				0xf1b8
-
-#define STB0899_STOPCLK1			0xf1c2
-#define STB0899_STOP_CKINTBUF108		(0x01 << 7)
-#define STB0899_OFFST_STOP_CKINTBUF108		7
-#define STB0899_WIDTH_STOP_CKINTBUF108		1
-#define STB0899_STOP_CKINTBUF216		(0x01 << 6)
-#define STB0899_OFFST_STOP_CKINTBUF216		6
-#define STB0899_WIDTH_STOP_CKINTBUF216		1
-#define STB0899_STOP_CHK8PSK			(0x01 << 5)
-#define STB0899_OFFST_STOP_CHK8PSK		5
-#define STB0899_WIDTH_STOP_CHK8PSK		1
-#define STB0899_STOP_CKFEC108			(0x01 << 4)
-#define STB0899_OFFST_STOP_CKFEC108		4
-#define STB0899_WIDTH_STOP_CKFEC108		1
-#define STB0899_STOP_CKFEC216			(0x01 << 3)
-#define STB0899_OFFST_STOP_CKFEC216		3
-#define STB0899_WIDTH_STOP_CKFEC216		1
-#define STB0899_STOP_CKCORE216			(0x01 << 2)
-#define STB0899_OFFST_STOP_CKCORE216		2
-#define STB0899_WIDTH_STOP_CKCORE216		1
-#define STB0899_STOP_CKADCI108			(0x01 << 1)
-#define STB0899_OFFST_STOP_CKADCI108		1
-#define STB0899_WIDTH_STOP_CKADCI108		1
-#define STB0899_STOP_INVCKADCI108		(0x01 << 0)
-#define STB0899_OFFST_STOP_INVCKADCI108		0
-#define STB0899_WIDTH_STOP_INVCKADCI108		1
-
-#define STB0899_STOPCLK2			0xf1c3
-#define STB0899_STOP_CKS2DMD108			(0x01 << 2)
-#define STB0899_OFFST_STOP_CKS2DMD108		2
-#define STB0899_WIDTH_STOP_CKS2DMD108		1
-#define STB0899_STOP_CKPKDLIN108		(0x01 << 1)
-#define STB0899_OFFST_STOP_CKPKDLIN108		1
-#define STB0899_WIDTH_STOP_CKPKDLIN108		1
-#define STB0899_STOP_CKPKDLIN216		(0x01 << 0)
-#define STB0899_OFFST_STOP_CKPKDLIN216		0
-#define STB0899_WIDTH_STOP_CKPKDLIN216		1
-
-#define STB0899_TSTTNR1				0xf1e0
-#define STB0899_BYPASS_ADC			(0x01 << 7)
-#define STB0899_OFFST_BYPASS_ADC		7
-#define STB0899_WIDTH_BYPASS_ADC		1
-#define STB0899_INVADCICKOUT			(0x01 << 6)
-#define STB0899_OFFST_INVADCICKOUT		6
-#define STB0899_WIDTH_INVADCICKOUT		1
-#define STB0899_ADCTEST_VOLTAGE			(0x03 << 4)
-#define STB0899_OFFST_ADCTEST_VOLTAGE		4
-#define STB0899_WIDTH_ADCTEST_VOLTAGE		1
-#define STB0899_ADC_RESET			(0x01 << 3)
-#define STB0899_OFFST_ADC_RESET			3
-#define STB0899_WIDTH_ADC_RESET			1
-#define STB0899_TSTTNR1_2			(0x01 << 2)
-#define STB0899_OFFST_TSTTNR1_2			2
-#define STB0899_WIDTH_TSTTNR1_2			1
-#define STB0899_ADCPON				(0x01 << 1)
-#define STB0899_OFFST_ADCPON			1
-#define STB0899_WIDTH_ADCPON			1
-#define STB0899_ADCIN_MODE			(0x01 << 0)
-#define STB0899_OFFST_ADCIN_MODE		0
-#define STB0899_WIDTH_ADCIN_MODE		1
-
-#define STB0899_TSTTNR2				0xf1e1
-#define STB0899_TSTTNR2_7			(0x01 << 7)
-#define STB0899_OFFST_TSTTNR2_7			7
-#define STB0899_WIDTH_TSTTNR2_7			1
-#define STB0899_NOT_DISRX_WIRED			(0x01 << 6)
-#define STB0899_OFFST_NOT_DISRX_WIRED		6
-#define STB0899_WIDTH_NOT_DISRX_WIRED		1
-#define STB0899_DISEQC_DCURRENT			(0x01 << 5)
-#define STB0899_OFFST_DISEQC_DCURRENT		5
-#define STB0899_WIDTH_DISEQC_DCURRENT		1
-#define STB0899_DISEQC_ZCURRENT			(0x01 << 4)
-#define STB0899_OFFST_DISEQC_ZCURRENT		4
-#define STB0899_WIDTH_DISEQC_ZCURRENT		1
-#define STB0899_DISEQC_SINC_SOURCE		(0x03 << 2)
-#define STB0899_OFFST_DISEQC_SINC_SOURCE	2
-#define STB0899_WIDTH_DISEQC_SINC_SOURCE	2
-#define STB0899_SELIQSRC			(0x03 << 0)
-#define STB0899_OFFST_SELIQSRC			0
-#define STB0899_WIDTH_SELIQSRC			2
-
-#define STB0899_TSTTNR3				0xf1e2
-
-#define STB0899_I2CCFG				0xf129
-#define STB0899_I2CCFGRSVD			(0x0f << 4)
-#define STB0899_OFFST_I2CCFGRSVD		4
-#define STB0899_WIDTH_I2CCFGRSVD		4
-#define STB0899_I2CFASTMODE			(0x01 << 3)
-#define STB0899_OFFST_I2CFASTMODE		3
-#define STB0899_WIDTH_I2CFASTMODE		1
-#define STB0899_STATUSWR			(0x01 << 2)
-#define STB0899_OFFST_STATUSWR			2
-#define STB0899_WIDTH_STATUSWR			1
-#define STB0899_I2CADDRINC			(0x03 << 0)
-#define STB0899_OFFST_I2CADDRINC		0
-#define STB0899_WIDTH_I2CADDRINC		2
-
-#define STB0899_I2CRPT				0xf12a
-#define STB0899_I2CTON				(0x01 << 7)
-#define STB0899_OFFST_I2CTON			7
-#define STB0899_WIDTH_I2CTON			1
-#define STB0899_ENARPTLEVEL			(0x01 << 6)
-#define STB0899_OFFST_ENARPTLEVEL		6
-#define STB0899_WIDTH_ENARPTLEVEL		2
-#define STB0899_SCLTDELAY			(0x01 << 3)
-#define STB0899_OFFST_SCLTDELAY			3
-#define STB0899_WIDTH_SCLTDELAY			1
-#define STB0899_STOPENA				(0x01 << 2)
-#define STB0899_OFFST_STOPENA			2
-#define STB0899_WIDTH_STOPENA			1
-#define STB0899_STOPSDAT2SDA			(0x01 << 1)
-#define STB0899_OFFST_STOPSDAT2SDA		1
-#define STB0899_WIDTH_STOPSDAT2SDA		1
-
-#define STB0899_IOPVALUE8			0xf136
-#define STB0899_IOPVALUE7			0xf137
-#define STB0899_IOPVALUE6			0xf138
-#define STB0899_IOPVALUE5			0xf139
-#define STB0899_IOPVALUE4			0xf13a
-#define STB0899_IOPVALUE3			0xf13b
-#define STB0899_IOPVALUE2			0xf13c
-#define STB0899_IOPVALUE1			0xf13d
-#define STB0899_IOPVALUE0			0xf13e
-
-#define STB0899_GPIO00CFG			0xf140
-
-#define STB0899_GPIO01CFG			0xf141
-#define STB0899_GPIO02CFG			0xf142
-#define STB0899_GPIO03CFG			0xf143
-#define STB0899_GPIO04CFG			0xf144
-#define STB0899_GPIO05CFG			0xf145
-#define STB0899_GPIO06CFG			0xf146
-#define STB0899_GPIO07CFG			0xf147
-#define STB0899_GPIO08CFG			0xf148
-#define STB0899_GPIO09CFG			0xf149
-#define STB0899_GPIO10CFG			0xf14a
-#define STB0899_GPIO11CFG			0xf14b
-#define STB0899_GPIO12CFG			0xf14c
-#define STB0899_GPIO13CFG			0xf14d
-#define STB0899_GPIO14CFG			0xf14e
-#define STB0899_GPIO15CFG			0xf14f
-#define STB0899_GPIO16CFG			0xf150
-#define STB0899_GPIO17CFG			0xf151
-#define STB0899_GPIO18CFG			0xf152
-#define STB0899_GPIO19CFG			0xf153
-#define STB0899_GPIO20CFG			0xf154
-
-#define STB0899_SDATCFG				0xf155
-#define STB0899_SCLTCFG				0xf156
-#define STB0899_AGCRFCFG			0xf157
-#define STB0899_GPIO22				0xf158	/* AGCBB2CFG	*/
-#define STB0899_GPIO21				0xf159  /* AGCBB1CFG	*/
-#define STB0899_DIRCLKCFG			0xf15a
-#define STB0899_CLKOUT27CFG			0xf15b
-#define STB0899_STDBYCFG			0xf15c
-#define STB0899_CS0CFG				0xf15d
-#define STB0899_CS1CFG				0xf15e
-#define STB0899_DISEQCOCFG			0xf15f
-
-#define STB0899_GPIO32CFG			0xf160
-#define STB0899_GPIO33CFG			0xf161
-#define STB0899_GPIO34CFG			0xf162
-#define STB0899_GPIO35CFG			0xf163
-#define STB0899_GPIO36CFG			0xf164
-#define STB0899_GPIO37CFG			0xf165
-#define STB0899_GPIO38CFG			0xf166
-#define STB0899_GPIO39CFG			0xf167
-
-#define STB0899_IRQSTATUS_3			0xf120
-#define STB0899_IRQSTATUS_2			0xf121
-#define STB0899_IRQSTATUS_1			0xf122
-#define STB0899_IRQSTATUS_0			0xf123
-
-#define STB0899_IRQMSK_3			0xf124
-#define STB0899_IRQMSK_2			0xf125
-#define STB0899_IRQMSK_1			0xf126
-#define STB0899_IRQMSK_0			0xf127
-
-#define STB0899_IRQCFG				0xf128
-
-#define STB0899_GHOSTREG			0xf000
-
-#define STB0899_S2DEMOD				0xf3fc
-#define STB0899_S2FEC				0xfafc
-
-
-#endif
diff --git a/drivers/media/dvb/frontends/stb6000.c b/drivers/media/dvb/frontends/stb6000.c
deleted file mode 100644
index a0c3c52..0000000
--- a/drivers/media/dvb/frontends/stb6000.c
+++ /dev/null
@@ -1,256 +0,0 @@
-  /*
-     Driver for ST STB6000 DVBS Silicon tuner
-
-     Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
-
-     This program is free software; you can redistribute it and/or modify
-     it under the terms of the GNU General Public License as published by
-     the Free Software Foundation; either version 2 of the License, or
-     (at your option) any later version.
-
-     This program is distributed in the hope that it will be useful,
-     but WITHOUT ANY WARRANTY; without even the implied warranty of
-     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
-     GNU General Public License for more details.
-
-     You should have received a copy of the GNU General Public License
-     along with this program; if not, write to the Free Software
-     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-  */
-
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/dvb/frontend.h>
-#include <asm/types.h>
-
-#include "stb6000.h"
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) \
-			printk(KERN_DEBUG "stb6000: " args); \
-	} while (0)
-
-struct stb6000_priv {
-	/* i2c details */
-	int i2c_address;
-	struct i2c_adapter *i2c;
-	u32 frequency;
-};
-
-static int stb6000_release(struct dvb_frontend *fe)
-{
-	kfree(fe->tuner_priv);
-	fe->tuner_priv = NULL;
-	return 0;
-}
-
-static int stb6000_sleep(struct dvb_frontend *fe)
-{
-	struct stb6000_priv *priv = fe->tuner_priv;
-	int ret;
-	u8 buf[] = { 10, 0 };
-	struct i2c_msg msg = {
-		.addr = priv->i2c_address,
-		.flags = 0,
-		.buf = buf,
-		.len = 2
-	};
-
-	dprintk("%s:\n", __func__);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	ret = i2c_transfer(priv->i2c, &msg, 1);
-	if (ret != 1)
-		dprintk("%s: i2c error\n", __func__);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-
-	return (ret == 1) ? 0 : ret;
-}
-
-static int stb6000_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct stb6000_priv *priv = fe->tuner_priv;
-	unsigned int n, m;
-	int ret;
-	u32 freq_mhz;
-	int bandwidth;
-	u8 buf[12];
-	struct i2c_msg msg = {
-		.addr = priv->i2c_address,
-		.flags = 0,
-		.buf = buf,
-		.len = 12
-	};
-
-	dprintk("%s:\n", __func__);
-
-	freq_mhz = p->frequency / 1000;
-	bandwidth = p->symbol_rate / 1000000;
-
-	if (bandwidth > 31)
-		bandwidth = 31;
-
-	if ((freq_mhz > 949) && (freq_mhz < 2151)) {
-		buf[0] = 0x01;
-		buf[1] = 0xac;
-		if (freq_mhz < 1950)
-			buf[1] = 0xaa;
-		if (freq_mhz < 1800)
-			buf[1] = 0xa8;
-		if (freq_mhz < 1650)
-			buf[1] = 0xa6;
-		if (freq_mhz < 1530)
-			buf[1] = 0xa5;
-		if (freq_mhz < 1470)
-			buf[1] = 0xa4;
-		if (freq_mhz < 1370)
-			buf[1] = 0xa2;
-		if (freq_mhz < 1300)
-			buf[1] = 0xa1;
-		if (freq_mhz < 1200)
-			buf[1] = 0xa0;
-		if (freq_mhz < 1075)
-			buf[1] = 0xbc;
-		if (freq_mhz < 1000)
-			buf[1] = 0xba;
-		if (freq_mhz < 1075) {
-			n = freq_mhz / 8; /* vco=lo*4 */
-			m = 2;
-		} else {
-			n = freq_mhz / 16; /* vco=lo*2 */
-			m = 1;
-		}
-		buf[2] = n >> 1;
-		buf[3] = (unsigned char)(((n & 1) << 7) |
-					(m * freq_mhz - n * 16) | 0x60);
-		buf[4] = 0x04;
-		buf[5] = 0x0e;
-
-		buf[6] = (unsigned char)(bandwidth);
-
-		buf[7] = 0xd8;
-		buf[8] = 0xd0;
-		buf[9] = 0x50;
-		buf[10] = 0xeb;
-		buf[11] = 0x4f;
-
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 1);
-
-		ret = i2c_transfer(priv->i2c, &msg, 1);
-		if (ret != 1)
-			dprintk("%s: i2c error\n", __func__);
-
-		udelay(10);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-
-		buf[0] = 0x07;
-		buf[1] = 0xdf;
-		buf[2] = 0xd0;
-		buf[3] = 0x50;
-		buf[4] = 0xfb;
-		msg.len = 5;
-
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 1);
-
-		ret = i2c_transfer(priv->i2c, &msg, 1);
-		if (ret != 1)
-			dprintk("%s: i2c error\n", __func__);
-
-		udelay(10);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-
-		priv->frequency = freq_mhz * 1000;
-
-		return (ret == 1) ? 0 : ret;
-	}
-	return -1;
-}
-
-static int stb6000_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
-	struct stb6000_priv *priv = fe->tuner_priv;
-	*frequency = priv->frequency;
-	return 0;
-}
-
-static struct dvb_tuner_ops stb6000_tuner_ops = {
-	.info = {
-		.name = "ST STB6000",
-		.frequency_min = 950000,
-		.frequency_max = 2150000
-	},
-	.release = stb6000_release,
-	.sleep = stb6000_sleep,
-	.set_params = stb6000_set_params,
-	.get_frequency = stb6000_get_frequency,
-};
-
-struct dvb_frontend *stb6000_attach(struct dvb_frontend *fe, int addr,
-						struct i2c_adapter *i2c)
-{
-	struct stb6000_priv *priv = NULL;
-	u8 b0[] = { 0 };
-	u8 b1[] = { 0, 0 };
-	struct i2c_msg msg[2] = {
-		{
-			.addr = addr,
-			.flags = 0,
-			.buf = b0,
-			.len = 0
-		}, {
-			.addr = addr,
-			.flags = I2C_M_RD,
-			.buf = b1,
-			.len = 2
-		}
-	};
-	int ret;
-
-	dprintk("%s:\n", __func__);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	/* is some i2c device here ? */
-	ret = i2c_transfer(i2c, msg, 2);
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-
-	if (ret != 2)
-		return NULL;
-
-	priv = kzalloc(sizeof(struct stb6000_priv), GFP_KERNEL);
-	if (priv == NULL)
-		return NULL;
-
-	priv->i2c_address = addr;
-	priv->i2c = i2c;
-
-	memcpy(&fe->ops.tuner_ops, &stb6000_tuner_ops,
-				sizeof(struct dvb_tuner_ops));
-
-	fe->tuner_priv = priv;
-
-	return fe;
-}
-EXPORT_SYMBOL(stb6000_attach);
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("DVB STB6000 driver");
-MODULE_AUTHOR("Igor M. Liplianin <liplianin@me.by>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/stb6000.h b/drivers/media/dvb/frontends/stb6000.h
deleted file mode 100644
index 7be479c..0000000
--- a/drivers/media/dvb/frontends/stb6000.h
+++ /dev/null
@@ -1,51 +0,0 @@
-  /*
-     Driver for ST stb6000 DVBS Silicon tuner
-
-     Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
-
-     This program is free software; you can redistribute it and/or modify
-     it under the terms of the GNU General Public License as published by
-     the Free Software Foundation; either version 2 of the License, or
-     (at your option) any later version.
-
-     This program is distributed in the hope that it will be useful,
-     but WITHOUT ANY WARRANTY; without even the implied warranty of
-     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
-     GNU General Public License for more details.
-
-     You should have received a copy of the GNU General Public License
-     along with this program; if not, write to the Free Software
-     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-  */
-
-#ifndef __DVB_STB6000_H__
-#define __DVB_STB6000_H__
-
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-
-/**
- * Attach a stb6000 tuner to the supplied frontend structure.
- *
- * @param fe Frontend to attach to.
- * @param addr i2c address of the tuner.
- * @param i2c i2c adapter to use.
- * @return FE pointer on success, NULL on failure.
- */
-#if defined(CONFIG_DVB_STB6000) || (defined(CONFIG_DVB_STB6000_MODULE) \
-							&& defined(MODULE))
-extern struct dvb_frontend *stb6000_attach(struct dvb_frontend *fe, int addr,
-					   struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *stb6000_attach(struct dvb_frontend *fe,
-						  int addr,
-						  struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_STB6000 */
-
-#endif /* __DVB_STB6000_H__ */
diff --git a/drivers/media/dvb/frontends/stb6100.c b/drivers/media/dvb/frontends/stb6100.c
deleted file mode 100644
index 2e93e65..0000000
--- a/drivers/media/dvb/frontends/stb6100.c
+++ /dev/null
@@ -1,611 +0,0 @@
-/*
-	STB6100 Silicon Tuner
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	Copyright (C) ST Microelectronics
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-
-#include "dvb_frontend.h"
-#include "stb6100.h"
-
-static unsigned int verbose;
-module_param(verbose, int, 0644);
-
-
-#define FE_ERROR		0
-#define FE_NOTICE		1
-#define FE_INFO			2
-#define FE_DEBUG		3
-
-#define dprintk(x, y, z, format, arg...) do {						\
-	if (z) {									\
-		if	((x > FE_ERROR) && (x > y))					\
-			printk(KERN_ERR "%s: " format "\n", __func__ , ##arg);		\
-		else if	((x > FE_NOTICE) && (x > y))					\
-			printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg);	\
-		else if ((x > FE_INFO) && (x > y))					\
-			printk(KERN_INFO "%s: " format "\n", __func__ , ##arg);		\
-		else if ((x > FE_DEBUG) && (x > y))					\
-			printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg);	\
-	} else {									\
-		if (x > y)								\
-			printk(format, ##arg);						\
-	}										\
-} while (0)
-
-struct stb6100_lkup {
-	u32 val_low;
-	u32 val_high;
-	u8   reg;
-};
-
-static int stb6100_release(struct dvb_frontend *fe);
-
-static const struct stb6100_lkup lkup[] = {
-	{       0,  950000, 0x0a },
-	{  950000, 1000000, 0x0a },
-	{ 1000000, 1075000, 0x0c },
-	{ 1075000, 1200000, 0x00 },
-	{ 1200000, 1300000, 0x01 },
-	{ 1300000, 1370000, 0x02 },
-	{ 1370000, 1470000, 0x04 },
-	{ 1470000, 1530000, 0x05 },
-	{ 1530000, 1650000, 0x06 },
-	{ 1650000, 1800000, 0x08 },
-	{ 1800000, 1950000, 0x0a },
-	{ 1950000, 2150000, 0x0c },
-	{ 2150000, 9999999, 0x0c },
-	{       0,       0, 0x00 }
-};
-
-/* Register names for easy debugging.	*/
-static const char *stb6100_regnames[] = {
-	[STB6100_LD]		= "LD",
-	[STB6100_VCO]		= "VCO",
-	[STB6100_NI]		= "NI",
-	[STB6100_NF_LSB]	= "NF",
-	[STB6100_K]		= "K",
-	[STB6100_G]		= "G",
-	[STB6100_F]		= "F",
-	[STB6100_DLB]		= "DLB",
-	[STB6100_TEST1]		= "TEST1",
-	[STB6100_FCCK]		= "FCCK",
-	[STB6100_LPEN]		= "LPEN",
-	[STB6100_TEST3]		= "TEST3",
-};
-
-/* Template for normalisation, i.e. setting unused or undocumented
- * bits as required according to the documentation.
- */
-struct stb6100_regmask {
-	u8 mask;
-	u8 set;
-};
-
-static const struct stb6100_regmask stb6100_template[] = {
-	[STB6100_LD]		= { 0xff, 0x00 },
-	[STB6100_VCO]		= { 0xff, 0x00 },
-	[STB6100_NI]		= { 0xff, 0x00 },
-	[STB6100_NF_LSB]	= { 0xff, 0x00 },
-	[STB6100_K]		= { 0xc7, 0x38 },
-	[STB6100_G]		= { 0xef, 0x10 },
-	[STB6100_F]		= { 0x1f, 0xc0 },
-	[STB6100_DLB]		= { 0x38, 0xc4 },
-	[STB6100_TEST1]		= { 0x00, 0x8f },
-	[STB6100_FCCK]		= { 0x40, 0x0d },
-	[STB6100_LPEN]		= { 0xf0, 0x0b },
-	[STB6100_TEST3]		= { 0x00, 0xde },
-};
-
-/*
- * Currently unused. Some boards might need it in the future
- */
-static inline void stb6100_normalise_regs(u8 regs[])
-{
-	int i;
-
-	for (i = 0; i < STB6100_NUMREGS; i++)
-		regs[i] = (regs[i] & stb6100_template[i].mask) | stb6100_template[i].set;
-}
-
-static int stb6100_read_regs(struct stb6100_state *state, u8 regs[])
-{
-	int rc;
-	struct i2c_msg msg = {
-		.addr	= state->config->tuner_address,
-		.flags	= I2C_M_RD,
-		.buf	= regs,
-		.len	= STB6100_NUMREGS
-	};
-
-	rc = i2c_transfer(state->i2c, &msg, 1);
-	if (unlikely(rc != 1)) {
-		dprintk(verbose, FE_ERROR, 1, "Read (0x%x) err, rc=[%d]",
-			state->config->tuner_address, rc);
-
-		return -EREMOTEIO;
-	}
-	if (unlikely(verbose > FE_DEBUG)) {
-		int i;
-
-		dprintk(verbose, FE_DEBUG, 1, "    Read from 0x%02x", state->config->tuner_address);
-		for (i = 0; i < STB6100_NUMREGS; i++)
-			dprintk(verbose, FE_DEBUG, 1, "        %s: 0x%02x", stb6100_regnames[i], regs[i]);
-	}
-	return 0;
-}
-
-static int stb6100_read_reg(struct stb6100_state *state, u8 reg)
-{
-	u8 regs[STB6100_NUMREGS];
-
-	struct i2c_msg msg = {
-		.addr	= state->config->tuner_address + reg,
-		.flags	= I2C_M_RD,
-		.buf	= regs,
-		.len	= 1
-	};
-
-	i2c_transfer(state->i2c, &msg, 1);
-
-	if (unlikely(reg >= STB6100_NUMREGS)) {
-		dprintk(verbose, FE_ERROR, 1, "Invalid register offset 0x%x", reg);
-		return -EINVAL;
-	}
-	if (unlikely(verbose > FE_DEBUG)) {
-		dprintk(verbose, FE_DEBUG, 1, "    Read from 0x%02x", state->config->tuner_address);
-		dprintk(verbose, FE_DEBUG, 1, "        %s: 0x%02x", stb6100_regnames[reg], regs[0]);
-	}
-
-	return (unsigned int)regs[0];
-}
-
-static int stb6100_write_reg_range(struct stb6100_state *state, u8 buf[], int start, int len)
-{
-	int rc;
-	u8 cmdbuf[len + 1];
-	struct i2c_msg msg = {
-		.addr	= state->config->tuner_address,
-		.flags	= 0,
-		.buf	= cmdbuf,
-		.len	= len + 1
-	};
-
-	if (unlikely(start < 1 || start + len > STB6100_NUMREGS)) {
-		dprintk(verbose, FE_ERROR, 1, "Invalid register range %d:%d",
-			start, len);
-		return -EINVAL;
-	}
-	memcpy(&cmdbuf[1], buf, len);
-	cmdbuf[0] = start;
-
-	if (unlikely(verbose > FE_DEBUG)) {
-		int i;
-
-		dprintk(verbose, FE_DEBUG, 1, "    Write @ 0x%02x: [%d:%d]", state->config->tuner_address, start, len);
-		for (i = 0; i < len; i++)
-			dprintk(verbose, FE_DEBUG, 1, "        %s: 0x%02x", stb6100_regnames[start + i], buf[i]);
-	}
-	rc = i2c_transfer(state->i2c, &msg, 1);
-	if (unlikely(rc != 1)) {
-		dprintk(verbose, FE_ERROR, 1, "(0x%x) write err [%d:%d], rc=[%d]",
-			(unsigned int)state->config->tuner_address, start, len,	rc);
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-
-static int stb6100_write_reg(struct stb6100_state *state, u8 reg, u8 data)
-{
-	if (unlikely(reg >= STB6100_NUMREGS)) {
-		dprintk(verbose, FE_ERROR, 1, "Invalid register offset 0x%x", reg);
-		return -EREMOTEIO;
-	}
-	data = (data & stb6100_template[reg].mask) | stb6100_template[reg].set;
-	return stb6100_write_reg_range(state, &data, reg, 1);
-}
-
-
-static int stb6100_get_status(struct dvb_frontend *fe, u32 *status)
-{
-	int rc;
-	struct stb6100_state *state = fe->tuner_priv;
-
-	rc = stb6100_read_reg(state, STB6100_LD);
-	if (rc < 0) {
-		dprintk(verbose, FE_ERROR, 1, "%s failed", __func__);
-		return rc;
-	}
-	return (rc & STB6100_LD_LOCK) ? TUNER_STATUS_LOCKED : 0;
-}
-
-static int stb6100_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
-{
-	int rc;
-	u8 f;
-	struct stb6100_state *state = fe->tuner_priv;
-
-	rc = stb6100_read_reg(state, STB6100_F);
-	if (rc < 0)
-		return rc;
-	f = rc & STB6100_F_F;
-
-	state->status.bandwidth = (f + 5) * 2000;	/* x2 for ZIF	*/
-
-	*bandwidth = state->bandwidth = state->status.bandwidth * 1000;
-	dprintk(verbose, FE_DEBUG, 1, "bandwidth = %u Hz", state->bandwidth);
-	return 0;
-}
-
-static int stb6100_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth)
-{
-	u32 tmp;
-	int rc;
-	struct stb6100_state *state = fe->tuner_priv;
-
-	dprintk(verbose, FE_DEBUG, 1, "set bandwidth to %u Hz", bandwidth);
-
-	bandwidth /= 2; /* ZIF */
-
-	if (bandwidth >= 36000000)	/* F[4:0] BW/2 max =31+5=36 mhz for F=31	*/
-		tmp = 31;
-	else if (bandwidth <= 5000000)	/* bw/2 min = 5Mhz for F=0			*/
-		tmp = 0;
-	else				/* if 5 < bw/2 < 36				*/
-		tmp = (bandwidth + 500000) / 1000000 - 5;
-
-	/* Turn on LPF bandwidth setting clock control,
-	 * set bandwidth, wait 10ms, turn off.
-	 */
-	rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d | STB6100_FCCK_FCCK);
-	if (rc < 0)
-		return rc;
-	rc = stb6100_write_reg(state, STB6100_F, 0xc0 | tmp);
-	if (rc < 0)
-		return rc;
-
-	msleep(5);  /*  This is dangerous as another (related) thread may start */
-
-	rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d);
-	if (rc < 0)
-		return rc;
-
-	msleep(10);  /*  This is dangerous as another (related) thread may start */
-
-	return 0;
-}
-
-static int stb6100_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
-	int rc;
-	u32 nint, nfrac, fvco;
-	int psd2, odiv;
-	struct stb6100_state *state = fe->tuner_priv;
-	u8 regs[STB6100_NUMREGS];
-
-	rc = stb6100_read_regs(state, regs);
-	if (rc < 0)
-		return rc;
-
-	odiv = (regs[STB6100_VCO] & STB6100_VCO_ODIV) >> STB6100_VCO_ODIV_SHIFT;
-	psd2 = (regs[STB6100_K] & STB6100_K_PSD2) >> STB6100_K_PSD2_SHIFT;
-	nint = regs[STB6100_NI];
-	nfrac = ((regs[STB6100_K] & STB6100_K_NF_MSB) << 8) | regs[STB6100_NF_LSB];
-	fvco = (nfrac * state->reference >> (9 - psd2)) + (nint * state->reference << psd2);
-	*frequency = state->frequency = fvco >> (odiv + 1);
-
-	dprintk(verbose, FE_DEBUG, 1,
-		"frequency = %u kHz, odiv = %u, psd2 = %u, fxtal = %u kHz, fvco = %u kHz, N(I) = %u, N(F) = %u",
-		state->frequency, odiv, psd2, state->reference,	fvco, nint, nfrac);
-	return 0;
-}
-
-
-static int stb6100_set_frequency(struct dvb_frontend *fe, u32 frequency)
-{
-	int rc;
-	const struct stb6100_lkup *ptr;
-	struct stb6100_state *state = fe->tuner_priv;
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-
-	u32 srate = 0, fvco, nint, nfrac;
-	u8 regs[STB6100_NUMREGS];
-	u8 g, psd2, odiv;
-
-	dprintk(verbose, FE_DEBUG, 1, "Version 2010-8-14 13:51");
-
-	if (fe->ops.get_frontend) {
-		dprintk(verbose, FE_DEBUG, 1, "Get frontend parameters");
-		fe->ops.get_frontend(fe);
-	}
-	srate = p->symbol_rate;
-
-	/* Set up tuner cleanly, LPF calibration on */
-	rc = stb6100_write_reg(state, STB6100_FCCK, 0x4d | STB6100_FCCK_FCCK);
-	if (rc < 0)
-		return rc;  /* allow LPF calibration */
-
-	/* PLL Loop disabled, bias on, VCO on, synth on */
-	regs[STB6100_LPEN] = 0xeb;
-	rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN]);
-	if (rc < 0)
-		return rc;
-
-	/* Program the registers with their data values */
-
-	/* VCO divide ratio (LO divide ratio, VCO prescaler enable).	*/
-	if (frequency <= 1075000)
-		odiv = 1;
-	else
-		odiv = 0;
-
-	/* VCO enabled, search clock off as per LL3.7, 3.4.1 */
-	regs[STB6100_VCO] = 0xe0 | (odiv << STB6100_VCO_ODIV_SHIFT);
-
-	/* OSM	*/
-	for (ptr = lkup;
-	     (ptr->val_high != 0) && !CHKRANGE(frequency, ptr->val_low, ptr->val_high);
-	     ptr++);
-
-	if (ptr->val_high == 0) {
-		printk(KERN_ERR "%s: frequency out of range: %u kHz\n", __func__, frequency);
-		return -EINVAL;
-	}
-	regs[STB6100_VCO] = (regs[STB6100_VCO] & ~STB6100_VCO_OSM) | ptr->reg;
-	rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
-	if (rc < 0)
-		return rc;
-
-	if ((frequency > 1075000) && (frequency <= 1325000))
-		psd2 = 0;
-	else
-		psd2 = 1;
-	/* F(VCO) = F(LO) * (ODIV == 0 ? 2 : 4)			*/
-	fvco = frequency << (1 + odiv);
-	/* N(I) = floor(f(VCO) / (f(XTAL) * (PSD2 ? 2 : 1)))	*/
-	nint = fvco / (state->reference << psd2);
-	/* N(F) = round(f(VCO) / f(XTAL) * (PSD2 ? 2 : 1) - N(I)) * 2 ^ 9	*/
-	nfrac = DIV_ROUND_CLOSEST((fvco - (nint * state->reference << psd2))
-					 << (9 - psd2), state->reference);
-
-	/* NI */
-	regs[STB6100_NI] = nint;
-	rc = stb6100_write_reg(state, STB6100_NI, regs[STB6100_NI]);
-	if (rc < 0)
-		return rc;
-
-	/* NF */
-	regs[STB6100_NF_LSB] = nfrac;
-	rc = stb6100_write_reg(state, STB6100_NF_LSB, regs[STB6100_NF_LSB]);
-	if (rc < 0)
-		return rc;
-
-	/* K */
-	regs[STB6100_K] = (0x38 & ~STB6100_K_PSD2) | (psd2 << STB6100_K_PSD2_SHIFT);
-	regs[STB6100_K] = (regs[STB6100_K] & ~STB6100_K_NF_MSB) | ((nfrac >> 8) & STB6100_K_NF_MSB);
-	rc = stb6100_write_reg(state, STB6100_K, regs[STB6100_K]);
-	if (rc < 0)
-		return rc;
-
-	/* G Baseband gain. */
-	if (srate >= 15000000)
-		g = 9;  /*  +4 dB */
-	else if (srate >= 5000000)
-		g = 11; /*  +8 dB */
-	else
-		g = 14; /* +14 dB */
-
-	regs[STB6100_G] = (0x10 & ~STB6100_G_G) | g;
-	regs[STB6100_G] &= ~STB6100_G_GCT; /* mask GCT */
-	regs[STB6100_G] |= (1 << 5); /* 2Vp-p Mode */
-	rc = stb6100_write_reg(state, STB6100_G, regs[STB6100_G]);
-	if (rc < 0)
-		return rc;
-
-	/* F we don't write as it is set up in BW set */
-
-	/* DLB set DC servo loop BW to 160Hz (LLA 3.8 / 2.1) */
-	regs[STB6100_DLB] = 0xcc;
-	rc = stb6100_write_reg(state, STB6100_DLB, regs[STB6100_DLB]);
-	if (rc < 0)
-		return rc;
-
-	dprintk(verbose, FE_DEBUG, 1,
-		"frequency = %u, srate = %u, g = %u, odiv = %u, psd2 = %u, fxtal = %u, osm = %u, fvco = %u, N(I) = %u, N(F) = %u",
-		frequency, srate, (unsigned int)g, (unsigned int)odiv,
-		(unsigned int)psd2, state->reference,
-		ptr->reg, fvco, nint, nfrac);
-
-	/* Set up the test registers */
-	regs[STB6100_TEST1] = 0x8f;
-	rc = stb6100_write_reg(state, STB6100_TEST1, regs[STB6100_TEST1]);
-	if (rc < 0)
-		return rc;
-	regs[STB6100_TEST3] = 0xde;
-	rc = stb6100_write_reg(state, STB6100_TEST3, regs[STB6100_TEST3]);
-	if (rc < 0)
-		return rc;
-
-	/* Bring up tuner according to LLA 3.7 3.4.1, step 2 */
-	regs[STB6100_LPEN] = 0xfb; /* PLL Loop enabled, bias on, VCO on, synth on */
-	rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN]);
-	if (rc < 0)
-		return rc;
-
-	msleep(2);
-
-	/* Bring up tuner according to LLA 3.7 3.4.1, step 3 */
-	regs[STB6100_VCO] &= ~STB6100_VCO_OCK;		/* VCO fast search		*/
-	rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
-	if (rc < 0)
-		return rc;
-
-	msleep(10);  /*  This is dangerous as another (related) thread may start */ /* wait for LO to lock */
-
-	regs[STB6100_VCO] &= ~STB6100_VCO_OSCH;		/* vco search disabled		*/
-	regs[STB6100_VCO] |= STB6100_VCO_OCK;		/* search clock off		*/
-	rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
-	if (rc < 0)
-		return rc;
-
-	rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d);
-	if (rc < 0)
-		return rc;  /* Stop LPF calibration */
-
-	msleep(10);  /*  This is dangerous as another (related) thread may start */
-		     /* wait for stabilisation, (should not be necessary)		*/
-	return 0;
-}
-
-static int stb6100_sleep(struct dvb_frontend *fe)
-{
-	/* TODO: power down	*/
-	return 0;
-}
-
-static int stb6100_init(struct dvb_frontend *fe)
-{
-	struct stb6100_state *state = fe->tuner_priv;
-	struct tuner_state *status = &state->status;
-
-	status->tunerstep	= 125000;
-	status->ifreq		= 0;
-	status->refclock	= 27000000;	/* Hz	*/
-	status->iqsense		= 1;
-	status->bandwidth	= 36000;	/* kHz	*/
-	state->bandwidth	= status->bandwidth * 1000;	/* Hz	*/
-	state->reference	= status->refclock / 1000;	/* kHz	*/
-
-	/* Set default bandwidth. Modified, PN 13-May-10	*/
-	return 0;
-}
-
-static int stb6100_get_state(struct dvb_frontend *fe,
-			     enum tuner_param param,
-			     struct tuner_state *state)
-{
-	switch (param) {
-	case DVBFE_TUNER_FREQUENCY:
-		stb6100_get_frequency(fe, &state->frequency);
-		break;
-	case DVBFE_TUNER_TUNERSTEP:
-		break;
-	case DVBFE_TUNER_IFFREQ:
-		break;
-	case DVBFE_TUNER_BANDWIDTH:
-		stb6100_get_bandwidth(fe, &state->bandwidth);
-		break;
-	case DVBFE_TUNER_REFCLOCK:
-		break;
-	default:
-		break;
-	}
-
-	return 0;
-}
-
-static int stb6100_set_state(struct dvb_frontend *fe,
-			     enum tuner_param param,
-			     struct tuner_state *state)
-{
-	struct stb6100_state *tstate = fe->tuner_priv;
-
-	switch (param) {
-	case DVBFE_TUNER_FREQUENCY:
-		stb6100_set_frequency(fe, state->frequency);
-		tstate->frequency = state->frequency;
-		break;
-	case DVBFE_TUNER_TUNERSTEP:
-		break;
-	case DVBFE_TUNER_IFFREQ:
-		break;
-	case DVBFE_TUNER_BANDWIDTH:
-		stb6100_set_bandwidth(fe, state->bandwidth);
-		tstate->bandwidth = state->bandwidth;
-		break;
-	case DVBFE_TUNER_REFCLOCK:
-		break;
-	default:
-		break;
-	}
-
-	return 0;
-}
-
-static struct dvb_tuner_ops stb6100_ops = {
-	.info = {
-		.name			= "STB6100 Silicon Tuner",
-		.frequency_min		= 950000,
-		.frequency_max		= 2150000,
-		.frequency_step		= 0,
-	},
-
-	.init		= stb6100_init,
-	.sleep          = stb6100_sleep,
-	.get_status	= stb6100_get_status,
-	.get_state	= stb6100_get_state,
-	.set_state	= stb6100_set_state,
-	.release	= stb6100_release
-};
-
-struct dvb_frontend *stb6100_attach(struct dvb_frontend *fe,
-				    const struct stb6100_config *config,
-				    struct i2c_adapter *i2c)
-{
-	struct stb6100_state *state = NULL;
-
-	state = kzalloc(sizeof (struct stb6100_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	state->config		= config;
-	state->i2c		= i2c;
-	state->frontend		= fe;
-	state->reference	= config->refclock / 1000; /* kHz */
-	fe->tuner_priv		= state;
-	fe->ops.tuner_ops	= stb6100_ops;
-
-	printk("%s: Attaching STB6100 \n", __func__);
-	return fe;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static int stb6100_release(struct dvb_frontend *fe)
-{
-	struct stb6100_state *state = fe->tuner_priv;
-
-	fe->tuner_priv = NULL;
-	kfree(state);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(stb6100_attach);
-MODULE_PARM_DESC(verbose, "Set Verbosity level");
-
-MODULE_AUTHOR("Manu Abraham");
-MODULE_DESCRIPTION("STB6100 Silicon tuner");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/stb6100.h b/drivers/media/dvb/frontends/stb6100.h
deleted file mode 100644
index 2ab0966..0000000
--- a/drivers/media/dvb/frontends/stb6100.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
-	STB6100 Silicon Tuner
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	Copyright (C) ST Microelectronics
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __STB_6100_REG_H
-#define __STB_6100_REG_H
-
-#include <linux/dvb/frontend.h>
-#include "dvb_frontend.h"
-
-#define STB6100_LD			0x00
-#define STB6100_LD_LOCK			(1 << 0)
-
-#define STB6100_VCO			0x01
-#define STB6100_VCO_OSCH		(0x01 << 7)
-#define STB6100_VCO_OSCH_SHIFT		7
-#define STB6100_VCO_OCK			(0x03 << 5)
-#define STB6100_VCO_OCK_SHIFT		5
-#define STB6100_VCO_ODIV		(0x01 << 4)
-#define STB6100_VCO_ODIV_SHIFT		4
-#define STB6100_VCO_OSM			(0x0f << 0)
-
-#define STB6100_NI			0x02
-#define STB6100_NF_LSB			0x03
-
-#define STB6100_K			0x04
-#define STB6100_K_PSD2			(0x01 << 2)
-#define STB6100_K_PSD2_SHIFT            2
-#define STB6100_K_NF_MSB		(0x03 << 0)
-
-#define STB6100_G			0x05
-#define STB6100_G_G			(0x0f << 0)
-#define STB6100_G_GCT			(0x07 << 5)
-
-#define STB6100_F			0x06
-#define STB6100_F_F			(0x1f << 0)
-
-#define STB6100_DLB			0x07
-
-#define STB6100_TEST1			0x08
-
-#define STB6100_FCCK			0x09
-#define STB6100_FCCK_FCCK		(0x01 << 6)
-
-#define STB6100_LPEN			0x0a
-#define STB6100_LPEN_LPEN		(0x01 << 4)
-#define STB6100_LPEN_SYNP		(0x01 << 5)
-#define STB6100_LPEN_OSCP		(0x01 << 6)
-#define STB6100_LPEN_BEN		(0x01 << 7)
-
-#define STB6100_TEST3			0x0b
-
-#define STB6100_NUMREGS                 0x0c
-
-
-#define INRANGE(val, x, y)		(((x <= val) && (val <= y)) ||		\
-					 ((y <= val) && (val <= x)) ? 1 : 0)
-
-#define CHKRANGE(val, x, y)		(((val >= x) && (val < y)) ? 1 : 0)
-
-struct stb6100_config {
-	u8	tuner_address;
-	u32	refclock;
-};
-
-struct stb6100_state {
-	struct i2c_adapter *i2c;
-
-	const struct stb6100_config	*config;
-	struct dvb_tuner_ops		ops;
-	struct dvb_frontend		*frontend;
-	struct tuner_state		status;
-
-	u32 frequency;
-	u32 srate;
-	u32 bandwidth;
-	u32 reference;
-};
-
-#if defined(CONFIG_DVB_STB6100) || (defined(CONFIG_DVB_STB6100_MODULE) && defined(MODULE))
-
-extern struct dvb_frontend *stb6100_attach(struct dvb_frontend *fe,
-					   const struct stb6100_config *config,
-					   struct i2c_adapter *i2c);
-
-#else
-
-static inline struct dvb_frontend *stb6100_attach(struct dvb_frontend *fe,
-						  const struct stb6100_config *config,
-						  struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-#endif //CONFIG_DVB_STB6100
-
-#endif
diff --git a/drivers/media/dvb/frontends/stb6100_cfg.h b/drivers/media/dvb/frontends/stb6100_cfg.h
deleted file mode 100644
index 6314d18..0000000
--- a/drivers/media/dvb/frontends/stb6100_cfg.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
-	STB6100 Silicon Tuner
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	Copyright (C) ST Microelectronics
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-static int stb6100_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
-	struct dvb_frontend_ops	*frontend_ops = NULL;
-	struct dvb_tuner_ops	*tuner_ops = NULL;
-	struct tuner_state	t_state;
-	int err = 0;
-
-	if (&fe->ops)
-		frontend_ops = &fe->ops;
-	if (&frontend_ops->tuner_ops)
-		tuner_ops = &frontend_ops->tuner_ops;
-	if (tuner_ops->get_state) {
-		if ((err = tuner_ops->get_state(fe, DVBFE_TUNER_FREQUENCY, &t_state)) < 0) {
-			printk("%s: Invalid parameter\n", __func__);
-			return err;
-		}
-		*frequency = t_state.frequency;
-	}
-	return 0;
-}
-
-static int stb6100_set_frequency(struct dvb_frontend *fe, u32 frequency)
-{
-	struct dvb_frontend_ops	*frontend_ops = NULL;
-	struct dvb_tuner_ops	*tuner_ops = NULL;
-	struct tuner_state	t_state;
-	int err = 0;
-
-	t_state.frequency = frequency;
-	if (&fe->ops)
-		frontend_ops = &fe->ops;
-	if (&frontend_ops->tuner_ops)
-		tuner_ops = &frontend_ops->tuner_ops;
-	if (tuner_ops->set_state) {
-		if ((err = tuner_ops->set_state(fe, DVBFE_TUNER_FREQUENCY, &t_state)) < 0) {
-			printk("%s: Invalid parameter\n", __func__);
-			return err;
-		}
-	}
-	return 0;
-}
-
-static int stb6100_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
-{
-	struct dvb_frontend_ops	*frontend_ops = &fe->ops;
-	struct dvb_tuner_ops	*tuner_ops = &frontend_ops->tuner_ops;
-	struct tuner_state	t_state;
-	int err = 0;
-
-	if (&fe->ops)
-		frontend_ops = &fe->ops;
-	if (&frontend_ops->tuner_ops)
-		tuner_ops = &frontend_ops->tuner_ops;
-	if (tuner_ops->get_state) {
-		if ((err = tuner_ops->get_state(fe, DVBFE_TUNER_BANDWIDTH, &t_state)) < 0) {
-			printk("%s: Invalid parameter\n", __func__);
-			return err;
-		}
-		*bandwidth = t_state.bandwidth;
-	}
-	return 0;
-}
-
-static int stb6100_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth)
-{
-	struct dvb_frontend_ops	*frontend_ops = NULL;
-	struct dvb_tuner_ops	*tuner_ops = NULL;
-	struct tuner_state	t_state;
-	int err = 0;
-
-	t_state.bandwidth = bandwidth;
-	if (&fe->ops)
-		frontend_ops = &fe->ops;
-	if (&frontend_ops->tuner_ops)
-		tuner_ops = &frontend_ops->tuner_ops;
-	if (tuner_ops->set_state) {
-		if ((err = tuner_ops->set_state(fe, DVBFE_TUNER_BANDWIDTH, &t_state)) < 0) {
-			printk("%s: Invalid parameter\n", __func__);
-			return err;
-		}
-	}
-	return 0;
-}
diff --git a/drivers/media/dvb/frontends/stb6100_proc.h b/drivers/media/dvb/frontends/stb6100_proc.h
deleted file mode 100644
index 112163a..0000000
--- a/drivers/media/dvb/frontends/stb6100_proc.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
-	STB6100 Silicon Tuner wrapper
-	Copyright (C)2009 Igor M. Liplianin (liplianin@me.by)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-static int stb6100_get_freq(struct dvb_frontend *fe, u32 *frequency)
-{
-	struct dvb_frontend_ops	*frontend_ops = NULL;
-	struct dvb_tuner_ops	*tuner_ops = NULL;
-	struct tuner_state	state;
-	int err = 0;
-
-	if (&fe->ops)
-		frontend_ops = &fe->ops;
-	if (&frontend_ops->tuner_ops)
-		tuner_ops = &frontend_ops->tuner_ops;
-	if (tuner_ops->get_state) {
-		if (frontend_ops->i2c_gate_ctrl)
-			frontend_ops->i2c_gate_ctrl(fe, 1);
-
-		err = tuner_ops->get_state(fe, DVBFE_TUNER_FREQUENCY, &state);
-		if (err < 0) {
-			printk(KERN_ERR "%s: Invalid parameter\n", __func__);
-			return err;
-		}
-
-		if (frontend_ops->i2c_gate_ctrl)
-			frontend_ops->i2c_gate_ctrl(fe, 0);
-
-		*frequency = state.frequency;
-	}
-
-	return 0;
-}
-
-static int stb6100_set_freq(struct dvb_frontend *fe, u32 frequency)
-{
-	struct dvb_frontend_ops	*frontend_ops = NULL;
-	struct dvb_tuner_ops	*tuner_ops = NULL;
-	struct tuner_state	state;
-	int err = 0;
-
-	state.frequency = frequency;
-	if (&fe->ops)
-		frontend_ops = &fe->ops;
-	if (&frontend_ops->tuner_ops)
-		tuner_ops = &frontend_ops->tuner_ops;
-	if (tuner_ops->set_state) {
-		if (frontend_ops->i2c_gate_ctrl)
-			frontend_ops->i2c_gate_ctrl(fe, 1);
-
-		err = tuner_ops->set_state(fe, DVBFE_TUNER_FREQUENCY, &state);
-		if (err < 0) {
-			printk(KERN_ERR "%s: Invalid parameter\n", __func__);
-			return err;
-		}
-
-		if (frontend_ops->i2c_gate_ctrl)
-			frontend_ops->i2c_gate_ctrl(fe, 0);
-
-	}
-
-	return 0;
-}
-
-static int stb6100_get_bandw(struct dvb_frontend *fe, u32 *bandwidth)
-{
-	struct dvb_frontend_ops	*frontend_ops = NULL;
-	struct dvb_tuner_ops	*tuner_ops = NULL;
-	struct tuner_state	state;
-	int err = 0;
-
-	if (&fe->ops)
-		frontend_ops = &fe->ops;
-	if (&frontend_ops->tuner_ops)
-		tuner_ops = &frontend_ops->tuner_ops;
-	if (tuner_ops->get_state) {
-		if (frontend_ops->i2c_gate_ctrl)
-			frontend_ops->i2c_gate_ctrl(fe, 1);
-
-		err = tuner_ops->get_state(fe, DVBFE_TUNER_BANDWIDTH, &state);
-		if (err < 0) {
-			printk(KERN_ERR "%s: Invalid parameter\n", __func__);
-			return err;
-		}
-
-		if (frontend_ops->i2c_gate_ctrl)
-			frontend_ops->i2c_gate_ctrl(fe, 0);
-
-		*bandwidth = state.bandwidth;
-	}
-
-	return 0;
-}
-
-static int stb6100_set_bandw(struct dvb_frontend *fe, u32 bandwidth)
-{
-	struct dvb_frontend_ops	*frontend_ops = NULL;
-	struct dvb_tuner_ops	*tuner_ops = NULL;
-	struct tuner_state	state;
-	int err = 0;
-
-	state.bandwidth = bandwidth;
-	if (&fe->ops)
-		frontend_ops = &fe->ops;
-	if (&frontend_ops->tuner_ops)
-		tuner_ops = &frontend_ops->tuner_ops;
-	if (tuner_ops->set_state) {
-		if (frontend_ops->i2c_gate_ctrl)
-			frontend_ops->i2c_gate_ctrl(fe, 1);
-
-		err = tuner_ops->set_state(fe, DVBFE_TUNER_BANDWIDTH, &state);
-		if (err < 0) {
-			printk(KERN_ERR "%s: Invalid parameter\n", __func__);
-			return err;
-		}
-
-		if (frontend_ops->i2c_gate_ctrl)
-			frontend_ops->i2c_gate_ctrl(fe, 0);
-
-	}
-
-	return 0;
-}
diff --git a/drivers/media/dvb/frontends/stv0288.c b/drivers/media/dvb/frontends/stv0288.c
deleted file mode 100644
index 632b251..0000000
--- a/drivers/media/dvb/frontends/stv0288.c
+++ /dev/null
@@ -1,626 +0,0 @@
-/*
-	Driver for ST STV0288 demodulator
-	Copyright (C) 2006 Georg Acher, BayCom GmbH, acher (at) baycom (dot) de
-		for Reel Multimedia
-	Copyright (C) 2008 TurboSight.com, Bob Liu <bob@turbosight.com>
-	Copyright (C) 2008 Igor M. Liplianin <liplianin@me.by>
-		Removed stb6000 specific tuner code and revised some
-		procedures.
-	2010-09-01 Josef Pavlik <josef@pavlik.it>
-		Fixed diseqc_msg, diseqc_burst and set_tone problems
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <asm/div64.h>
-
-#include "dvb_frontend.h"
-#include "stv0288.h"
-
-struct stv0288_state {
-	struct i2c_adapter *i2c;
-	const struct stv0288_config *config;
-	struct dvb_frontend frontend;
-
-	u8 initialised:1;
-	u32 tuner_frequency;
-	u32 symbol_rate;
-	fe_code_rate_t fec_inner;
-	int errmode;
-};
-
-#define STATUS_BER 0
-#define STATUS_UCBLOCKS 1
-
-static int debug;
-static int debug_legacy_dish_switch;
-#define dprintk(args...) \
-	do { \
-		if (debug) \
-			printk(KERN_DEBUG "stv0288: " args); \
-	} while (0)
-
-
-static int stv0288_writeregI(struct stv0288_state *state, u8 reg, u8 data)
-{
-	int ret;
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg = {
-		.addr = state->config->demod_address,
-		.flags = 0,
-		.buf = buf,
-		.len = 2
-	};
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-
-	if (ret != 1)
-		dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, "
-			"ret == %i)\n", __func__, reg, data, ret);
-
-	return (ret != 1) ? -EREMOTEIO : 0;
-}
-
-static int stv0288_write(struct dvb_frontend *fe, const u8 buf[], int len)
-{
-	struct stv0288_state *state = fe->demodulator_priv;
-
-	if (len != 2)
-		return -EINVAL;
-
-	return stv0288_writeregI(state, buf[0], buf[1]);
-}
-
-static u8 stv0288_readreg(struct stv0288_state *state, u8 reg)
-{
-	int ret;
-	u8 b0[] = { reg };
-	u8 b1[] = { 0 };
-	struct i2c_msg msg[] = {
-		{
-			.addr = state->config->demod_address,
-			.flags = 0,
-			.buf = b0,
-			.len = 1
-		}, {
-			.addr = state->config->demod_address,
-			.flags = I2C_M_RD,
-			.buf = b1,
-			.len = 1
-		}
-	};
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2)
-		dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n",
-				__func__, reg, ret);
-
-	return b1[0];
-}
-
-static int stv0288_set_symbolrate(struct dvb_frontend *fe, u32 srate)
-{
-	struct stv0288_state *state = fe->demodulator_priv;
-	unsigned int temp;
-	unsigned char b[3];
-
-	if ((srate < 1000000) || (srate > 45000000))
-		return -EINVAL;
-
-	stv0288_writeregI(state, 0x22, 0);
-	stv0288_writeregI(state, 0x23, 0);
-	stv0288_writeregI(state, 0x2b, 0xff);
-	stv0288_writeregI(state, 0x2c, 0xf7);
-
-	temp = (unsigned int)srate / 1000;
-
-		temp = temp * 32768;
-		temp = temp / 25;
-		temp = temp / 125;
-		b[0] = (unsigned char)((temp >> 12) & 0xff);
-		b[1] = (unsigned char)((temp >> 4) & 0xff);
-		b[2] = (unsigned char)((temp << 4) & 0xf0);
-		stv0288_writeregI(state, 0x28, 0x80); /* SFRH */
-		stv0288_writeregI(state, 0x29, 0); /* SFRM */
-		stv0288_writeregI(state, 0x2a, 0); /* SFRL */
-
-		stv0288_writeregI(state, 0x28, b[0]);
-		stv0288_writeregI(state, 0x29, b[1]);
-		stv0288_writeregI(state, 0x2a, b[2]);
-		dprintk("stv0288: stv0288_set_symbolrate\n");
-
-	return 0;
-}
-
-static int stv0288_send_diseqc_msg(struct dvb_frontend *fe,
-				    struct dvb_diseqc_master_cmd *m)
-{
-	struct stv0288_state *state = fe->demodulator_priv;
-
-	int i;
-
-	dprintk("%s\n", __func__);
-
-	stv0288_writeregI(state, 0x09, 0);
-	msleep(30);
-	stv0288_writeregI(state, 0x05, 0x12);/* modulated mode, single shot */
-
-	for (i = 0; i < m->msg_len; i++) {
-		if (stv0288_writeregI(state, 0x06, m->msg[i]))
-			return -EREMOTEIO;
-	}
-	msleep(m->msg_len*12);
-	return 0;
-}
-
-static int stv0288_send_diseqc_burst(struct dvb_frontend *fe,
-						fe_sec_mini_cmd_t burst)
-{
-	struct stv0288_state *state = fe->demodulator_priv;
-
-	dprintk("%s\n", __func__);
-
-	if (stv0288_writeregI(state, 0x05, 0x03))/* burst mode, single shot */
-		return -EREMOTEIO;
-
-	if (stv0288_writeregI(state, 0x06, burst == SEC_MINI_A ? 0x00 : 0xff))
-		return -EREMOTEIO;
-
-	msleep(15);
-	if (stv0288_writeregI(state, 0x05, 0x12))
-		return -EREMOTEIO;
-
-	return 0;
-}
-
-static int stv0288_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
-{
-	struct stv0288_state *state = fe->demodulator_priv;
-
-	switch (tone) {
-	case SEC_TONE_ON:
-		if (stv0288_writeregI(state, 0x05, 0x10))/* cont carrier */
-			return -EREMOTEIO;
-	break;
-
-	case SEC_TONE_OFF:
-		if (stv0288_writeregI(state, 0x05, 0x12))/* burst mode off*/
-			return -EREMOTEIO;
-	break;
-
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static u8 stv0288_inittab[] = {
-	0x01, 0x15,
-	0x02, 0x20,
-	0x09, 0x0,
-	0x0a, 0x4,
-	0x0b, 0x0,
-	0x0c, 0x0,
-	0x0d, 0x0,
-	0x0e, 0xd4,
-	0x0f, 0x30,
-	0x11, 0x80,
-	0x12, 0x03,
-	0x13, 0x48,
-	0x14, 0x84,
-	0x15, 0x45,
-	0x16, 0xb7,
-	0x17, 0x9c,
-	0x18, 0x0,
-	0x19, 0xa6,
-	0x1a, 0x88,
-	0x1b, 0x8f,
-	0x1c, 0xf0,
-	0x20, 0x0b,
-	0x21, 0x54,
-	0x22, 0x0,
-	0x23, 0x0,
-	0x2b, 0xff,
-	0x2c, 0xf7,
-	0x30, 0x0,
-	0x31, 0x1e,
-	0x32, 0x14,
-	0x33, 0x0f,
-	0x34, 0x09,
-	0x35, 0x0c,
-	0x36, 0x05,
-	0x37, 0x2f,
-	0x38, 0x16,
-	0x39, 0xbe,
-	0x3a, 0x0,
-	0x3b, 0x13,
-	0x3c, 0x11,
-	0x3d, 0x30,
-	0x40, 0x63,
-	0x41, 0x04,
-	0x42, 0x20,
-	0x43, 0x00,
-	0x44, 0x00,
-	0x45, 0x00,
-	0x46, 0x00,
-	0x47, 0x00,
-	0x4a, 0x00,
-	0x50, 0x10,
-	0x51, 0x38,
-	0x52, 0x21,
-	0x58, 0x54,
-	0x59, 0x86,
-	0x5a, 0x0,
-	0x5b, 0x9b,
-	0x5c, 0x08,
-	0x5d, 0x7f,
-	0x5e, 0x0,
-	0x5f, 0xff,
-	0x70, 0x0,
-	0x71, 0x0,
-	0x72, 0x0,
-	0x74, 0x0,
-	0x75, 0x0,
-	0x76, 0x0,
-	0x81, 0x0,
-	0x82, 0x3f,
-	0x83, 0x3f,
-	0x84, 0x0,
-	0x85, 0x0,
-	0x88, 0x0,
-	0x89, 0x0,
-	0x8a, 0x0,
-	0x8b, 0x0,
-	0x8c, 0x0,
-	0x90, 0x0,
-	0x91, 0x0,
-	0x92, 0x0,
-	0x93, 0x0,
-	0x94, 0x1c,
-	0x97, 0x0,
-	0xa0, 0x48,
-	0xa1, 0x0,
-	0xb0, 0xb8,
-	0xb1, 0x3a,
-	0xb2, 0x10,
-	0xb3, 0x82,
-	0xb4, 0x80,
-	0xb5, 0x82,
-	0xb6, 0x82,
-	0xb7, 0x82,
-	0xb8, 0x20,
-	0xb9, 0x0,
-	0xf0, 0x0,
-	0xf1, 0x0,
-	0xf2, 0xc0,
-	0x51, 0x36,
-	0x52, 0x09,
-	0x53, 0x94,
-	0x54, 0x62,
-	0x55, 0x29,
-	0x56, 0x64,
-	0x57, 0x2b,
-	0xff, 0xff,
-};
-
-static int stv0288_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t volt)
-{
-	dprintk("%s: %s\n", __func__,
-		volt == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" :
-		volt == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : "??");
-
-	return 0;
-}
-
-static int stv0288_init(struct dvb_frontend *fe)
-{
-	struct stv0288_state *state = fe->demodulator_priv;
-	int i;
-	u8 reg;
-	u8 val;
-
-	dprintk("stv0288: init chip\n");
-	stv0288_writeregI(state, 0x41, 0x04);
-	msleep(50);
-
-	/* we have default inittab */
-	if (state->config->inittab == NULL) {
-		for (i = 0; !(stv0288_inittab[i] == 0xff &&
-				stv0288_inittab[i + 1] == 0xff); i += 2)
-			stv0288_writeregI(state, stv0288_inittab[i],
-					stv0288_inittab[i + 1]);
-	} else {
-		for (i = 0; ; i += 2)  {
-			reg = state->config->inittab[i];
-			val = state->config->inittab[i+1];
-			if (reg == 0xff && val == 0xff)
-				break;
-			stv0288_writeregI(state, reg, val);
-		}
-	}
-	return 0;
-}
-
-static int stv0288_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct stv0288_state *state = fe->demodulator_priv;
-
-	u8 sync = stv0288_readreg(state, 0x24);
-	if (sync == 255)
-		sync = 0;
-
-	dprintk("%s : FE_READ_STATUS : VSTATUS: 0x%02x\n", __func__, sync);
-
-	*status = 0;
-	if (sync & 0x80)
-		*status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
-	if (sync & 0x10)
-		*status |= FE_HAS_VITERBI;
-	if (sync & 0x08) {
-		*status |= FE_HAS_LOCK;
-		dprintk("stv0288 has locked\n");
-	}
-
-	return 0;
-}
-
-static int stv0288_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct stv0288_state *state = fe->demodulator_priv;
-
-	if (state->errmode != STATUS_BER)
-		return 0;
-	*ber = (stv0288_readreg(state, 0x26) << 8) |
-					stv0288_readreg(state, 0x27);
-	dprintk("stv0288_read_ber %d\n", *ber);
-
-	return 0;
-}
-
-
-static int stv0288_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	struct stv0288_state *state = fe->demodulator_priv;
-
-	s32 signal =  0xffff - ((stv0288_readreg(state, 0x10) << 8));
-
-
-	signal = signal * 5 / 4;
-	*strength = (signal > 0xffff) ? 0xffff : (signal < 0) ? 0 : signal;
-	dprintk("stv0288_read_signal_strength %d\n", *strength);
-
-	return 0;
-}
-static int stv0288_sleep(struct dvb_frontend *fe)
-{
-	struct stv0288_state *state = fe->demodulator_priv;
-
-	stv0288_writeregI(state, 0x41, 0x84);
-	state->initialised = 0;
-
-	return 0;
-}
-static int stv0288_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct stv0288_state *state = fe->demodulator_priv;
-
-	s32 xsnr = 0xffff - ((stv0288_readreg(state, 0x2d) << 8)
-			   | stv0288_readreg(state, 0x2e));
-	xsnr = 3 * (xsnr - 0xa100);
-	*snr = (xsnr > 0xffff) ? 0xffff : (xsnr < 0) ? 0 : xsnr;
-	dprintk("stv0288_read_snr %d\n", *snr);
-
-	return 0;
-}
-
-static int stv0288_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	struct stv0288_state *state = fe->demodulator_priv;
-
-	if (state->errmode != STATUS_BER)
-		return 0;
-	*ucblocks = (stv0288_readreg(state, 0x26) << 8) |
-					stv0288_readreg(state, 0x27);
-	dprintk("stv0288_read_ber %d\n", *ucblocks);
-
-	return 0;
-}
-
-static int stv0288_set_property(struct dvb_frontend *fe, struct dtv_property *p)
-{
-	dprintk("%s(..)\n", __func__);
-	return 0;
-}
-
-static int stv0288_set_frontend(struct dvb_frontend *fe)
-{
-	struct stv0288_state *state = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-
-	char tm;
-	unsigned char tda[3];
-	u8 reg, time_out = 0;
-
-	dprintk("%s : FE_SET_FRONTEND\n", __func__);
-
-	if (c->delivery_system != SYS_DVBS) {
-			dprintk("%s: unsupported delivery "
-				"system selected (%d)\n",
-				__func__, c->delivery_system);
-			return -EOPNOTSUPP;
-	}
-
-	if (state->config->set_ts_params)
-		state->config->set_ts_params(fe, 0);
-
-	/* only frequency & symbol_rate are used for tuner*/
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	udelay(10);
-	stv0288_set_symbolrate(fe, c->symbol_rate);
-	/* Carrier lock control register */
-	stv0288_writeregI(state, 0x15, 0xc5);
-
-	tda[2] = 0x0; /* CFRL */
-	for (tm = -9; tm < 7;) {
-		/* Viterbi status */
-		reg = stv0288_readreg(state, 0x24);
-		if (reg & 0x8)
-				break;
-		if (reg & 0x80) {
-			time_out++;
-			if (time_out > 10)
-				break;
-			tda[2] += 40;
-			if (tda[2] < 40)
-				tm++;
-		} else {
-			tm++;
-			tda[2] = 0;
-			time_out = 0;
-		}
-		tda[1] = (unsigned char)tm;
-		stv0288_writeregI(state, 0x2b, tda[1]);
-		stv0288_writeregI(state, 0x2c, tda[2]);
-		msleep(30);
-	}
-	state->tuner_frequency = c->frequency;
-	state->fec_inner = FEC_AUTO;
-	state->symbol_rate = c->symbol_rate;
-
-	return 0;
-}
-
-static int stv0288_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct stv0288_state *state = fe->demodulator_priv;
-
-	if (enable)
-		stv0288_writeregI(state, 0x01, 0xb5);
-	else
-		stv0288_writeregI(state, 0x01, 0x35);
-
-	udelay(1);
-
-	return 0;
-}
-
-static void stv0288_release(struct dvb_frontend *fe)
-{
-	struct stv0288_state *state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops stv0288_ops = {
-	.delsys = { SYS_DVBS },
-	.info = {
-		.name			= "ST STV0288 DVB-S",
-		.frequency_min		= 950000,
-		.frequency_max		= 2150000,
-		.frequency_stepsize	= 1000,	 /* kHz for QPSK frontends */
-		.frequency_tolerance	= 0,
-		.symbol_rate_min	= 1000000,
-		.symbol_rate_max	= 45000000,
-		.symbol_rate_tolerance	= 500,	/* ppm */
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-		      FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
-		      FE_CAN_QPSK |
-		      FE_CAN_FEC_AUTO
-	},
-
-	.release = stv0288_release,
-	.init = stv0288_init,
-	.sleep = stv0288_sleep,
-	.write = stv0288_write,
-	.i2c_gate_ctrl = stv0288_i2c_gate_ctrl,
-	.read_status = stv0288_read_status,
-	.read_ber = stv0288_read_ber,
-	.read_signal_strength = stv0288_read_signal_strength,
-	.read_snr = stv0288_read_snr,
-	.read_ucblocks = stv0288_read_ucblocks,
-	.diseqc_send_master_cmd = stv0288_send_diseqc_msg,
-	.diseqc_send_burst = stv0288_send_diseqc_burst,
-	.set_tone = stv0288_set_tone,
-	.set_voltage = stv0288_set_voltage,
-
-	.set_property = stv0288_set_property,
-	.set_frontend = stv0288_set_frontend,
-};
-
-struct dvb_frontend *stv0288_attach(const struct stv0288_config *config,
-				    struct i2c_adapter *i2c)
-{
-	struct stv0288_state *state = NULL;
-	int id;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct stv0288_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->initialised = 0;
-	state->tuner_frequency = 0;
-	state->symbol_rate = 0;
-	state->fec_inner = 0;
-	state->errmode = STATUS_BER;
-
-	stv0288_writeregI(state, 0x41, 0x04);
-	msleep(200);
-	id = stv0288_readreg(state, 0x00);
-	dprintk("stv0288 id %x\n", id);
-
-	/* register 0x00 contains 0x11 for STV0288  */
-	if (id != 0x11)
-		goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &stv0288_ops,
-			sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-
-	return NULL;
-}
-EXPORT_SYMBOL(stv0288_attach);
-
-module_param(debug_legacy_dish_switch, int, 0444);
-MODULE_PARM_DESC(debug_legacy_dish_switch,
-		"Enable timing analysis for Dish Network legacy switches");
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("ST STV0288 DVB Demodulator driver");
-MODULE_AUTHOR("Georg Acher, Bob Liu, Igor liplianin");
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/media/dvb/frontends/stv0288.h b/drivers/media/dvb/frontends/stv0288.h
deleted file mode 100644
index f2b53db..0000000
--- a/drivers/media/dvb/frontends/stv0288.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
-	Driver for ST STV0288 demodulator
-
-	Copyright (C) 2006 Georg Acher, BayCom GmbH, acher (at) baycom (dot) de
-		for Reel Multimedia
-	Copyright (C) 2008 TurboSight.com, <bob@turbosight.com>
-	Copyright (C) 2008 Igor M. Liplianin <liplianin@me.by>
-		Removed stb6000 specific tuner code and revised some
-		procedures.
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef STV0288_H
-#define STV0288_H
-
-#include <linux/dvb/frontend.h>
-#include "dvb_frontend.h"
-
-struct stv0288_config {
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	u8* inittab;
-
-	/* minimum delay before retuning */
-	int min_delay_ms;
-
-	int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured);
-};
-
-#if defined(CONFIG_DVB_STV0288) || (defined(CONFIG_DVB_STV0288_MODULE) && \
-							defined(MODULE))
-extern struct dvb_frontend *stv0288_attach(const struct stv0288_config *config,
-					   struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *stv0288_attach(const struct stv0288_config *config,
-					   struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_STV0288 */
-
-static inline int stv0288_writereg(struct dvb_frontend *fe, u8 reg, u8 val)
-{
-	int r = 0;
-	u8 buf[] = { reg, val };
-	if (fe->ops.write)
-		r = fe->ops.write(fe, buf, 2);
-	return r;
-}
-
-#endif /* STV0288_H */
diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb/frontends/stv0297.c
deleted file mode 100644
index d40f226..0000000
--- a/drivers/media/dvb/frontends/stv0297.c
+++ /dev/null
@@ -1,722 +0,0 @@
-/*
-    Driver for STV0297 demodulator
-
-    Copyright (C) 2004 Andrew de Quincey <adq_dvb@lidskialf.net>
-    Copyright (C) 2003-2004 Dennis Noermann <dennis.noermann@noernet.de>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/jiffies.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "stv0297.h"
-
-struct stv0297_state {
-	struct i2c_adapter *i2c;
-	const struct stv0297_config *config;
-	struct dvb_frontend frontend;
-
-	unsigned long last_ber;
-	unsigned long base_freq;
-};
-
-#if 1
-#define dprintk(x...) printk(x)
-#else
-#define dprintk(x...)
-#endif
-
-#define STV0297_CLOCK_KHZ   28900
-
-
-static int stv0297_writereg(struct stv0297_state *state, u8 reg, u8 data)
-{
-	int ret;
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg = {.addr = state->config->demod_address,.flags = 0,.buf = buf,.len = 2 };
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-
-	if (ret != 1)
-		dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, "
-			"ret == %i)\n", __func__, reg, data, ret);
-
-	return (ret != 1) ? -1 : 0;
-}
-
-static int stv0297_readreg(struct stv0297_state *state, u8 reg)
-{
-	int ret;
-	u8 b0[] = { reg };
-	u8 b1[] = { 0 };
-	struct i2c_msg msg[] = { {.addr = state->config->demod_address,.flags = 0,.buf = b0,.len = 1},
-				 {.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = b1,.len = 1}
-			       };
-
-	// this device needs a STOP between the register and data
-	if (state->config->stop_during_read) {
-		if ((ret = i2c_transfer(state->i2c, &msg[0], 1)) != 1) {
-			dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __func__, reg, ret);
-			return -1;
-		}
-		if ((ret = i2c_transfer(state->i2c, &msg[1], 1)) != 1) {
-			dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __func__, reg, ret);
-			return -1;
-		}
-	} else {
-		if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) {
-			dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __func__, reg, ret);
-			return -1;
-		}
-	}
-
-	return b1[0];
-}
-
-static int stv0297_writereg_mask(struct stv0297_state *state, u8 reg, u8 mask, u8 data)
-{
-	int val;
-
-	val = stv0297_readreg(state, reg);
-	val &= ~mask;
-	val |= (data & mask);
-	stv0297_writereg(state, reg, val);
-
-	return 0;
-}
-
-static int stv0297_readregs(struct stv0297_state *state, u8 reg1, u8 * b, u8 len)
-{
-	int ret;
-	struct i2c_msg msg[] = { {.addr = state->config->demod_address,.flags = 0,.buf =
-				  &reg1,.len = 1},
-	{.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = b,.len = len}
-	};
-
-	// this device needs a STOP between the register and data
-	if (state->config->stop_during_read) {
-		if ((ret = i2c_transfer(state->i2c, &msg[0], 1)) != 1) {
-			dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __func__, reg1, ret);
-			return -1;
-		}
-		if ((ret = i2c_transfer(state->i2c, &msg[1], 1)) != 1) {
-			dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __func__, reg1, ret);
-			return -1;
-		}
-	} else {
-		if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) {
-			dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __func__, reg1, ret);
-			return -1;
-		}
-	}
-
-	return 0;
-}
-
-static u32 stv0297_get_symbolrate(struct stv0297_state *state)
-{
-	u64 tmp;
-
-	tmp = stv0297_readreg(state, 0x55);
-	tmp |= stv0297_readreg(state, 0x56) << 8;
-	tmp |= stv0297_readreg(state, 0x57) << 16;
-	tmp |= stv0297_readreg(state, 0x58) << 24;
-
-	tmp *= STV0297_CLOCK_KHZ;
-	tmp >>= 32;
-
-	return (u32) tmp;
-}
-
-static void stv0297_set_symbolrate(struct stv0297_state *state, u32 srate)
-{
-	long tmp;
-
-	tmp = 131072L * srate;	/* 131072 = 2^17  */
-	tmp = tmp / (STV0297_CLOCK_KHZ / 4);	/* 1/4 = 2^-2 */
-	tmp = tmp * 8192L;	/* 8192 = 2^13 */
-
-	stv0297_writereg(state, 0x55, (unsigned char) (tmp & 0xFF));
-	stv0297_writereg(state, 0x56, (unsigned char) (tmp >> 8));
-	stv0297_writereg(state, 0x57, (unsigned char) (tmp >> 16));
-	stv0297_writereg(state, 0x58, (unsigned char) (tmp >> 24));
-}
-
-static void stv0297_set_sweeprate(struct stv0297_state *state, short fshift, long symrate)
-{
-	long tmp;
-
-	tmp = (long) fshift *262144L;	/* 262144 = 2*18 */
-	tmp /= symrate;
-	tmp *= 1024;		/* 1024 = 2*10   */
-
-	// adjust
-	if (tmp >= 0) {
-		tmp += 500000;
-	} else {
-		tmp -= 500000;
-	}
-	tmp /= 1000000;
-
-	stv0297_writereg(state, 0x60, tmp & 0xFF);
-	stv0297_writereg_mask(state, 0x69, 0xF0, (tmp >> 4) & 0xf0);
-}
-
-static void stv0297_set_carrieroffset(struct stv0297_state *state, long offset)
-{
-	long tmp;
-
-	/* symrate is hardcoded to 10000 */
-	tmp = offset * 26844L;	/* (2**28)/10000 */
-	if (tmp < 0)
-		tmp += 0x10000000;
-	tmp &= 0x0FFFFFFF;
-
-	stv0297_writereg(state, 0x66, (unsigned char) (tmp & 0xFF));
-	stv0297_writereg(state, 0x67, (unsigned char) (tmp >> 8));
-	stv0297_writereg(state, 0x68, (unsigned char) (tmp >> 16));
-	stv0297_writereg_mask(state, 0x69, 0x0F, (tmp >> 24) & 0x0f);
-}
-
-/*
-static long stv0297_get_carrieroffset(struct stv0297_state *state)
-{
-	s64 tmp;
-
-	stv0297_writereg(state, 0x6B, 0x00);
-
-	tmp = stv0297_readreg(state, 0x66);
-	tmp |= (stv0297_readreg(state, 0x67) << 8);
-	tmp |= (stv0297_readreg(state, 0x68) << 16);
-	tmp |= (stv0297_readreg(state, 0x69) & 0x0F) << 24;
-
-	tmp *= stv0297_get_symbolrate(state);
-	tmp >>= 28;
-
-	return (s32) tmp;
-}
-*/
-
-static void stv0297_set_initialdemodfreq(struct stv0297_state *state, long freq)
-{
-	s32 tmp;
-
-	if (freq > 10000)
-		freq -= STV0297_CLOCK_KHZ;
-
-	tmp = (STV0297_CLOCK_KHZ * 1000) / (1 << 16);
-	tmp = (freq * 1000) / tmp;
-	if (tmp > 0xffff)
-		tmp = 0xffff;
-
-	stv0297_writereg_mask(state, 0x25, 0x80, 0x80);
-	stv0297_writereg(state, 0x21, tmp >> 8);
-	stv0297_writereg(state, 0x20, tmp);
-}
-
-static int stv0297_set_qam(struct stv0297_state *state, fe_modulation_t modulation)
-{
-	int val = 0;
-
-	switch (modulation) {
-	case QAM_16:
-		val = 0;
-		break;
-
-	case QAM_32:
-		val = 1;
-		break;
-
-	case QAM_64:
-		val = 4;
-		break;
-
-	case QAM_128:
-		val = 2;
-		break;
-
-	case QAM_256:
-		val = 3;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	stv0297_writereg_mask(state, 0x00, 0x70, val << 4);
-
-	return 0;
-}
-
-static int stv0297_set_inversion(struct stv0297_state *state, fe_spectral_inversion_t inversion)
-{
-	int val = 0;
-
-	switch (inversion) {
-	case INVERSION_OFF:
-		val = 0;
-		break;
-
-	case INVERSION_ON:
-		val = 1;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	stv0297_writereg_mask(state, 0x83, 0x08, val << 3);
-
-	return 0;
-}
-
-static int stv0297_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct stv0297_state *state = fe->demodulator_priv;
-
-	if (enable) {
-		stv0297_writereg(state, 0x87, 0x78);
-		stv0297_writereg(state, 0x86, 0xc8);
-	}
-
-	return 0;
-}
-
-static int stv0297_init(struct dvb_frontend *fe)
-{
-	struct stv0297_state *state = fe->demodulator_priv;
-	int i;
-
-	/* load init table */
-	for (i=0; !(state->config->inittab[i] == 0xff && state->config->inittab[i+1] == 0xff); i+=2)
-		stv0297_writereg(state, state->config->inittab[i], state->config->inittab[i+1]);
-	msleep(200);
-
-	state->last_ber = 0;
-
-	return 0;
-}
-
-static int stv0297_sleep(struct dvb_frontend *fe)
-{
-	struct stv0297_state *state = fe->demodulator_priv;
-
-	stv0297_writereg_mask(state, 0x80, 1, 1);
-
-	return 0;
-}
-
-static int stv0297_read_status(struct dvb_frontend *fe, fe_status_t * status)
-{
-	struct stv0297_state *state = fe->demodulator_priv;
-
-	u8 sync = stv0297_readreg(state, 0xDF);
-
-	*status = 0;
-	if (sync & 0x80)
-		*status |=
-			FE_HAS_SYNC | FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_LOCK;
-	return 0;
-}
-
-static int stv0297_read_ber(struct dvb_frontend *fe, u32 * ber)
-{
-	struct stv0297_state *state = fe->demodulator_priv;
-	u8 BER[3];
-
-	stv0297_readregs(state, 0xA0, BER, 3);
-	if (!(BER[0] & 0x80)) {
-		state->last_ber = BER[2] << 8 | BER[1];
-		stv0297_writereg_mask(state, 0xA0, 0x80, 0x80);
-	}
-
-	*ber = state->last_ber;
-
-	return 0;
-}
-
-
-static int stv0297_read_signal_strength(struct dvb_frontend *fe, u16 * strength)
-{
-	struct stv0297_state *state = fe->demodulator_priv;
-	u8 STRENGTH[3];
-	u16 tmp;
-
-	stv0297_readregs(state, 0x41, STRENGTH, 3);
-	tmp = (STRENGTH[1] & 0x03) << 8 | STRENGTH[0];
-	if (STRENGTH[2] & 0x20) {
-		if (tmp < 0x200)
-			tmp = 0;
-		else
-			tmp = tmp - 0x200;
-	} else {
-		if (tmp > 0x1ff)
-			tmp = 0;
-		else
-			tmp = 0x1ff - tmp;
-	}
-	*strength = (tmp << 7) | (tmp >> 2);
-	return 0;
-}
-
-static int stv0297_read_snr(struct dvb_frontend *fe, u16 * snr)
-{
-	struct stv0297_state *state = fe->demodulator_priv;
-	u8 SNR[2];
-
-	stv0297_readregs(state, 0x07, SNR, 2);
-	*snr = SNR[1] << 8 | SNR[0];
-
-	return 0;
-}
-
-static int stv0297_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks)
-{
-	struct stv0297_state *state = fe->demodulator_priv;
-
-	stv0297_writereg_mask(state, 0xDF, 0x03, 0x03); /* freeze the counters */
-
-	*ucblocks = (stv0297_readreg(state, 0xD5) << 8)
-		| stv0297_readreg(state, 0xD4);
-
-	stv0297_writereg_mask(state, 0xDF, 0x03, 0x02); /* clear the counters */
-	stv0297_writereg_mask(state, 0xDF, 0x03, 0x01); /* re-enable the counters */
-
-	return 0;
-}
-
-static int stv0297_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct stv0297_state *state = fe->demodulator_priv;
-	int u_threshold;
-	int initial_u;
-	int blind_u;
-	int delay;
-	int sweeprate;
-	int carrieroffset;
-	unsigned long timeout;
-	fe_spectral_inversion_t inversion;
-
-	switch (p->modulation) {
-	case QAM_16:
-	case QAM_32:
-	case QAM_64:
-		delay = 100;
-		sweeprate = 1000;
-		break;
-
-	case QAM_128:
-	case QAM_256:
-		delay = 200;
-		sweeprate = 500;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	// determine inversion dependent parameters
-	inversion = p->inversion;
-	if (state->config->invert)
-		inversion = (inversion == INVERSION_ON) ? INVERSION_OFF : INVERSION_ON;
-	carrieroffset = -330;
-	switch (inversion) {
-	case INVERSION_OFF:
-		break;
-
-	case INVERSION_ON:
-		sweeprate = -sweeprate;
-		carrieroffset = -carrieroffset;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	stv0297_init(fe);
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	/* clear software interrupts */
-	stv0297_writereg(state, 0x82, 0x0);
-
-	/* set initial demodulation frequency */
-	stv0297_set_initialdemodfreq(state, 7250);
-
-	/* setup AGC */
-	stv0297_writereg_mask(state, 0x43, 0x10, 0x00);
-	stv0297_writereg(state, 0x41, 0x00);
-	stv0297_writereg_mask(state, 0x42, 0x03, 0x01);
-	stv0297_writereg_mask(state, 0x36, 0x60, 0x00);
-	stv0297_writereg_mask(state, 0x36, 0x18, 0x00);
-	stv0297_writereg_mask(state, 0x71, 0x80, 0x80);
-	stv0297_writereg(state, 0x72, 0x00);
-	stv0297_writereg(state, 0x73, 0x00);
-	stv0297_writereg_mask(state, 0x74, 0x0F, 0x00);
-	stv0297_writereg_mask(state, 0x43, 0x08, 0x00);
-	stv0297_writereg_mask(state, 0x71, 0x80, 0x00);
-
-	/* setup STL */
-	stv0297_writereg_mask(state, 0x5a, 0x20, 0x20);
-	stv0297_writereg_mask(state, 0x5b, 0x02, 0x02);
-	stv0297_writereg_mask(state, 0x5b, 0x02, 0x00);
-	stv0297_writereg_mask(state, 0x5b, 0x01, 0x00);
-	stv0297_writereg_mask(state, 0x5a, 0x40, 0x40);
-
-	/* disable frequency sweep */
-	stv0297_writereg_mask(state, 0x6a, 0x01, 0x00);
-
-	/* reset deinterleaver */
-	stv0297_writereg_mask(state, 0x81, 0x01, 0x01);
-	stv0297_writereg_mask(state, 0x81, 0x01, 0x00);
-
-	/* ??? */
-	stv0297_writereg_mask(state, 0x83, 0x20, 0x20);
-	stv0297_writereg_mask(state, 0x83, 0x20, 0x00);
-
-	/* reset equaliser */
-	u_threshold = stv0297_readreg(state, 0x00) & 0xf;
-	initial_u = stv0297_readreg(state, 0x01) >> 4;
-	blind_u = stv0297_readreg(state, 0x01) & 0xf;
-	stv0297_writereg_mask(state, 0x84, 0x01, 0x01);
-	stv0297_writereg_mask(state, 0x84, 0x01, 0x00);
-	stv0297_writereg_mask(state, 0x00, 0x0f, u_threshold);
-	stv0297_writereg_mask(state, 0x01, 0xf0, initial_u << 4);
-	stv0297_writereg_mask(state, 0x01, 0x0f, blind_u);
-
-	/* data comes from internal A/D */
-	stv0297_writereg_mask(state, 0x87, 0x80, 0x00);
-
-	/* clear phase registers */
-	stv0297_writereg(state, 0x63, 0x00);
-	stv0297_writereg(state, 0x64, 0x00);
-	stv0297_writereg(state, 0x65, 0x00);
-	stv0297_writereg(state, 0x66, 0x00);
-	stv0297_writereg(state, 0x67, 0x00);
-	stv0297_writereg(state, 0x68, 0x00);
-	stv0297_writereg_mask(state, 0x69, 0x0f, 0x00);
-
-	/* set parameters */
-	stv0297_set_qam(state, p->modulation);
-	stv0297_set_symbolrate(state, p->symbol_rate / 1000);
-	stv0297_set_sweeprate(state, sweeprate, p->symbol_rate / 1000);
-	stv0297_set_carrieroffset(state, carrieroffset);
-	stv0297_set_inversion(state, inversion);
-
-	/* kick off lock */
-	/* Disable corner detection for higher QAMs */
-	if (p->modulation == QAM_128 ||
-		p->modulation == QAM_256)
-		stv0297_writereg_mask(state, 0x88, 0x08, 0x00);
-	else
-		stv0297_writereg_mask(state, 0x88, 0x08, 0x08);
-
-	stv0297_writereg_mask(state, 0x5a, 0x20, 0x00);
-	stv0297_writereg_mask(state, 0x6a, 0x01, 0x01);
-	stv0297_writereg_mask(state, 0x43, 0x40, 0x40);
-	stv0297_writereg_mask(state, 0x5b, 0x30, 0x00);
-	stv0297_writereg_mask(state, 0x03, 0x0c, 0x0c);
-	stv0297_writereg_mask(state, 0x03, 0x03, 0x03);
-	stv0297_writereg_mask(state, 0x43, 0x10, 0x10);
-
-	/* wait for WGAGC lock */
-	timeout = jiffies + msecs_to_jiffies(2000);
-	while (time_before(jiffies, timeout)) {
-		msleep(10);
-		if (stv0297_readreg(state, 0x43) & 0x08)
-			break;
-	}
-	if (time_after(jiffies, timeout)) {
-		goto timeout;
-	}
-	msleep(20);
-
-	/* wait for equaliser partial convergence */
-	timeout = jiffies + msecs_to_jiffies(500);
-	while (time_before(jiffies, timeout)) {
-		msleep(10);
-
-		if (stv0297_readreg(state, 0x82) & 0x04) {
-			break;
-		}
-	}
-	if (time_after(jiffies, timeout)) {
-		goto timeout;
-	}
-
-	/* wait for equaliser full convergence */
-	timeout = jiffies + msecs_to_jiffies(delay);
-	while (time_before(jiffies, timeout)) {
-		msleep(10);
-
-		if (stv0297_readreg(state, 0x82) & 0x08) {
-			break;
-		}
-	}
-	if (time_after(jiffies, timeout)) {
-		goto timeout;
-	}
-
-	/* disable sweep */
-	stv0297_writereg_mask(state, 0x6a, 1, 0);
-	stv0297_writereg_mask(state, 0x88, 8, 0);
-
-	/* wait for main lock */
-	timeout = jiffies + msecs_to_jiffies(20);
-	while (time_before(jiffies, timeout)) {
-		msleep(10);
-
-		if (stv0297_readreg(state, 0xDF) & 0x80) {
-			break;
-		}
-	}
-	if (time_after(jiffies, timeout)) {
-		goto timeout;
-	}
-	msleep(100);
-
-	/* is it still locked after that delay? */
-	if (!(stv0297_readreg(state, 0xDF) & 0x80)) {
-		goto timeout;
-	}
-
-	/* success!! */
-	stv0297_writereg_mask(state, 0x5a, 0x40, 0x00);
-	state->base_freq = p->frequency;
-	return 0;
-
-timeout:
-	stv0297_writereg_mask(state, 0x6a, 0x01, 0x00);
-	return 0;
-}
-
-static int stv0297_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct stv0297_state *state = fe->demodulator_priv;
-	int reg_00, reg_83;
-
-	reg_00 = stv0297_readreg(state, 0x00);
-	reg_83 = stv0297_readreg(state, 0x83);
-
-	p->frequency = state->base_freq;
-	p->inversion = (reg_83 & 0x08) ? INVERSION_ON : INVERSION_OFF;
-	if (state->config->invert)
-		p->inversion = (p->inversion == INVERSION_ON) ? INVERSION_OFF : INVERSION_ON;
-	p->symbol_rate = stv0297_get_symbolrate(state) * 1000;
-	p->fec_inner = FEC_NONE;
-
-	switch ((reg_00 >> 4) & 0x7) {
-	case 0:
-		p->modulation = QAM_16;
-		break;
-	case 1:
-		p->modulation = QAM_32;
-		break;
-	case 2:
-		p->modulation = QAM_128;
-		break;
-	case 3:
-		p->modulation = QAM_256;
-		break;
-	case 4:
-		p->modulation = QAM_64;
-		break;
-	}
-
-	return 0;
-}
-
-static void stv0297_release(struct dvb_frontend *fe)
-{
-	struct stv0297_state *state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops stv0297_ops;
-
-struct dvb_frontend *stv0297_attach(const struct stv0297_config *config,
-				    struct i2c_adapter *i2c)
-{
-	struct stv0297_state *state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct stv0297_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->last_ber = 0;
-	state->base_freq = 0;
-
-	/* check if the demod is there */
-	if ((stv0297_readreg(state, 0x80) & 0x70) != 0x20)
-		goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &stv0297_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops stv0297_ops = {
-	.delsys = { SYS_DVBC_ANNEX_A },
-	.info = {
-		 .name = "ST STV0297 DVB-C",
-		 .frequency_min = 47000000,
-		 .frequency_max = 862000000,
-		 .frequency_stepsize = 62500,
-		 .symbol_rate_min = 870000,
-		 .symbol_rate_max = 11700000,
-		 .caps = FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 |
-		 FE_CAN_QAM_128 | FE_CAN_QAM_256 | FE_CAN_FEC_AUTO},
-
-	.release = stv0297_release,
-
-	.init = stv0297_init,
-	.sleep = stv0297_sleep,
-	.i2c_gate_ctrl = stv0297_i2c_gate_ctrl,
-
-	.set_frontend = stv0297_set_frontend,
-	.get_frontend = stv0297_get_frontend,
-
-	.read_status = stv0297_read_status,
-	.read_ber = stv0297_read_ber,
-	.read_signal_strength = stv0297_read_signal_strength,
-	.read_snr = stv0297_read_snr,
-	.read_ucblocks = stv0297_read_ucblocks,
-};
-
-MODULE_DESCRIPTION("ST STV0297 DVB-C Demodulator driver");
-MODULE_AUTHOR("Dennis Noermann and Andrew de Quincey");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(stv0297_attach);
diff --git a/drivers/media/dvb/frontends/stv0297.h b/drivers/media/dvb/frontends/stv0297.h
deleted file mode 100644
index 3f8f946..0000000
--- a/drivers/media/dvb/frontends/stv0297.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
-    Driver for STV0297 demodulator
-
-    Copyright (C) 2003-2004 Dennis Noermann <dennis.noermann@noernet.de>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef STV0297_H
-#define STV0297_H
-
-#include <linux/dvb/frontend.h>
-#include "dvb_frontend.h"
-
-struct stv0297_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* inittab - array of pairs of values.
-	* First of each pair is the register, second is the value.
-	* List should be terminated with an 0xff, 0xff pair.
-	*/
-	u8* inittab;
-
-	/* does the "inversion" need inverted? */
-	u8 invert:1;
-
-	/* set to 1 if the device requires an i2c STOP during reading */
-	u8 stop_during_read:1;
-};
-
-#if defined(CONFIG_DVB_STV0297) || (defined(CONFIG_DVB_STV0297_MODULE) && defined(MODULE))
-extern struct dvb_frontend* stv0297_attach(const struct stv0297_config* config,
-					   struct i2c_adapter* i2c);
-#else
-static inline struct dvb_frontend* stv0297_attach(const struct stv0297_config* config,
-					   struct i2c_adapter* i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_STV0297
-
-#endif // STV0297_H
diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c
deleted file mode 100644
index 057b5f8..0000000
--- a/drivers/media/dvb/frontends/stv0299.c
+++ /dev/null
@@ -1,762 +0,0 @@
-/*
-    Driver for ST STV0299 demodulator
-
-    Copyright (C) 2001-2002 Convergence Integrated Media GmbH
-	<ralph@convergence.de>,
-	<holger@convergence.de>,
-	<js@convergence.de>
-
-
-    Philips SU1278/SH
-
-    Copyright (C) 2002 by Peter Schildmann <peter.schildmann@web.de>
-
-
-    LG TDQF-S001F
-
-    Copyright (C) 2002 Felix Domke <tmbinc@elitedvb.net>
-		     & Andreas Oberritter <obi@linuxtv.org>
-
-
-    Support for Samsung TBMU24112IMB used on Technisat SkyStar2 rev. 2.6B
-
-    Copyright (C) 2003 Vadim Catana <skystar@moldova.cc>:
-
-    Support for Philips SU1278 on Technotrend hardware
-
-    Copyright (C) 2004 Andrew de Quincey <adq_dvb@lidskialf.net>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <asm/div64.h>
-
-#include "dvb_frontend.h"
-#include "stv0299.h"
-
-struct stv0299_state {
-	struct i2c_adapter* i2c;
-	const struct stv0299_config* config;
-	struct dvb_frontend frontend;
-
-	u8 initialised:1;
-	u32 tuner_frequency;
-	u32 symbol_rate;
-	fe_code_rate_t fec_inner;
-	int errmode;
-	u32 ucblocks;
-	u8 mcr_reg;
-};
-
-#define STATUS_BER 0
-#define STATUS_UCBLOCKS 1
-
-static int debug;
-static int debug_legacy_dish_switch;
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "stv0299: " args); \
-	} while (0)
-
-
-static int stv0299_writeregI (struct stv0299_state* state, u8 reg, u8 data)
-{
-	int ret;
-	u8 buf [] = { reg, data };
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
-
-	ret = i2c_transfer (state->i2c, &msg, 1);
-
-	if (ret != 1)
-		dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, "
-			"ret == %i)\n", __func__, reg, data, ret);
-
-	return (ret != 1) ? -EREMOTEIO : 0;
-}
-
-static int stv0299_write(struct dvb_frontend* fe, const u8 buf[], int len)
-{
-	struct stv0299_state* state = fe->demodulator_priv;
-
-	if (len != 2)
-		return -EINVAL;
-
-	return stv0299_writeregI(state, buf[0], buf[1]);
-}
-
-static u8 stv0299_readreg (struct stv0299_state* state, u8 reg)
-{
-	int ret;
-	u8 b0 [] = { reg };
-	u8 b1 [] = { 0 };
-	struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
-			   { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
-
-	ret = i2c_transfer (state->i2c, msg, 2);
-
-	if (ret != 2)
-		dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n",
-				__func__, reg, ret);
-
-	return b1[0];
-}
-
-static int stv0299_readregs (struct stv0299_state* state, u8 reg1, u8 *b, u8 len)
-{
-	int ret;
-	struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = &reg1, .len = 1 },
-			   { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b, .len = len } };
-
-	ret = i2c_transfer (state->i2c, msg, 2);
-
-	if (ret != 2)
-		dprintk("%s: readreg error (ret == %i)\n", __func__, ret);
-
-	return ret == 2 ? 0 : ret;
-}
-
-static int stv0299_set_FEC (struct stv0299_state* state, fe_code_rate_t fec)
-{
-	dprintk ("%s\n", __func__);
-
-	switch (fec) {
-	case FEC_AUTO:
-	{
-		return stv0299_writeregI (state, 0x31, 0x1f);
-	}
-	case FEC_1_2:
-	{
-		return stv0299_writeregI (state, 0x31, 0x01);
-	}
-	case FEC_2_3:
-	{
-		return stv0299_writeregI (state, 0x31, 0x02);
-	}
-	case FEC_3_4:
-	{
-		return stv0299_writeregI (state, 0x31, 0x04);
-	}
-	case FEC_5_6:
-	{
-		return stv0299_writeregI (state, 0x31, 0x08);
-	}
-	case FEC_7_8:
-	{
-		return stv0299_writeregI (state, 0x31, 0x10);
-	}
-	default:
-	{
-		return -EINVAL;
-	}
-    }
-}
-
-static fe_code_rate_t stv0299_get_fec (struct stv0299_state* state)
-{
-	static fe_code_rate_t fec_tab [] = { FEC_2_3, FEC_3_4, FEC_5_6,
-					     FEC_7_8, FEC_1_2 };
-	u8 index;
-
-	dprintk ("%s\n", __func__);
-
-	index = stv0299_readreg (state, 0x1b);
-	index &= 0x7;
-
-	if (index > 4)
-		return FEC_AUTO;
-
-	return fec_tab [index];
-}
-
-static int stv0299_wait_diseqc_fifo (struct stv0299_state* state, int timeout)
-{
-	unsigned long start = jiffies;
-
-	dprintk ("%s\n", __func__);
-
-	while (stv0299_readreg(state, 0x0a) & 1) {
-		if (jiffies - start > timeout) {
-			dprintk ("%s: timeout!!\n", __func__);
-			return -ETIMEDOUT;
-		}
-		msleep(10);
-	};
-
-	return 0;
-}
-
-static int stv0299_wait_diseqc_idle (struct stv0299_state* state, int timeout)
-{
-	unsigned long start = jiffies;
-
-	dprintk ("%s\n", __func__);
-
-	while ((stv0299_readreg(state, 0x0a) & 3) != 2 ) {
-		if (jiffies - start > timeout) {
-			dprintk ("%s: timeout!!\n", __func__);
-			return -ETIMEDOUT;
-		}
-		msleep(10);
-	};
-
-	return 0;
-}
-
-static int stv0299_set_symbolrate (struct dvb_frontend* fe, u32 srate)
-{
-	struct stv0299_state* state = fe->demodulator_priv;
-	u64 big = srate;
-	u32 ratio;
-
-	// check rate is within limits
-	if ((srate < 1000000) || (srate > 45000000)) return -EINVAL;
-
-	// calculate value to program
-	big = big << 20;
-	big += (state->config->mclk-1); // round correctly
-	do_div(big, state->config->mclk);
-	ratio = big << 4;
-
-	return state->config->set_symbol_rate(fe, srate, ratio);
-}
-
-static int stv0299_get_symbolrate (struct stv0299_state* state)
-{
-	u32 Mclk = state->config->mclk / 4096L;
-	u32 srate;
-	s32 offset;
-	u8 sfr[3];
-	s8 rtf;
-
-	dprintk ("%s\n", __func__);
-
-	stv0299_readregs (state, 0x1f, sfr, 3);
-	stv0299_readregs (state, 0x1a, (u8 *)&rtf, 1);
-
-	srate = (sfr[0] << 8) | sfr[1];
-	srate *= Mclk;
-	srate /= 16;
-	srate += (sfr[2] >> 4) * Mclk / 256;
-	offset = (s32) rtf * (srate / 4096L);
-	offset /= 128;
-
-	dprintk ("%s : srate = %i\n", __func__, srate);
-	dprintk ("%s : ofset = %i\n", __func__, offset);
-
-	srate += offset;
-
-	srate += 1000;
-	srate /= 2000;
-	srate *= 2000;
-
-	return srate;
-}
-
-static int stv0299_send_diseqc_msg (struct dvb_frontend* fe,
-				    struct dvb_diseqc_master_cmd *m)
-{
-	struct stv0299_state* state = fe->demodulator_priv;
-	u8 val;
-	int i;
-
-	dprintk ("%s\n", __func__);
-
-	if (stv0299_wait_diseqc_idle (state, 100) < 0)
-		return -ETIMEDOUT;
-
-	val = stv0299_readreg (state, 0x08);
-
-	if (stv0299_writeregI (state, 0x08, (val & ~0x7) | 0x6))  /* DiSEqC mode */
-		return -EREMOTEIO;
-
-	for (i=0; i<m->msg_len; i++) {
-		if (stv0299_wait_diseqc_fifo (state, 100) < 0)
-			return -ETIMEDOUT;
-
-		if (stv0299_writeregI (state, 0x09, m->msg[i]))
-			return -EREMOTEIO;
-	}
-
-	if (stv0299_wait_diseqc_idle (state, 100) < 0)
-		return -ETIMEDOUT;
-
-	return 0;
-}
-
-static int stv0299_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
-{
-	struct stv0299_state* state = fe->demodulator_priv;
-	u8 val;
-
-	dprintk ("%s\n", __func__);
-
-	if (stv0299_wait_diseqc_idle (state, 100) < 0)
-		return -ETIMEDOUT;
-
-	val = stv0299_readreg (state, 0x08);
-
-	if (stv0299_writeregI (state, 0x08, (val & ~0x7) | 0x2))	/* burst mode */
-		return -EREMOTEIO;
-
-	if (stv0299_writeregI (state, 0x09, burst == SEC_MINI_A ? 0x00 : 0xff))
-		return -EREMOTEIO;
-
-	if (stv0299_wait_diseqc_idle (state, 100) < 0)
-		return -ETIMEDOUT;
-
-	if (stv0299_writeregI (state, 0x08, val))
-		return -EREMOTEIO;
-
-	return 0;
-}
-
-static int stv0299_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
-{
-	struct stv0299_state* state = fe->demodulator_priv;
-	u8 val;
-
-	if (stv0299_wait_diseqc_idle (state, 100) < 0)
-		return -ETIMEDOUT;
-
-	val = stv0299_readreg (state, 0x08);
-
-	switch (tone) {
-	case SEC_TONE_ON:
-		return stv0299_writeregI (state, 0x08, val | 0x3);
-
-	case SEC_TONE_OFF:
-		return stv0299_writeregI (state, 0x08, (val & ~0x3) | 0x02);
-
-	default:
-		return -EINVAL;
-	}
-}
-
-static int stv0299_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
-{
-	struct stv0299_state* state = fe->demodulator_priv;
-	u8 reg0x08;
-	u8 reg0x0c;
-
-	dprintk("%s: %s\n", __func__,
-		voltage == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" :
-		voltage == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : "??");
-
-	reg0x08 = stv0299_readreg (state, 0x08);
-	reg0x0c = stv0299_readreg (state, 0x0c);
-
-	/**
-	 *  H/V switching over OP0, OP1 and OP2 are LNB power enable bits
-	 */
-	reg0x0c &= 0x0f;
-	reg0x08 = (reg0x08 & 0x3f) | (state->config->lock_output << 6);
-
-	switch (voltage) {
-	case SEC_VOLTAGE_13:
-		if (state->config->volt13_op0_op1 == STV0299_VOLT13_OP0)
-			reg0x0c |= 0x10; /* OP1 off, OP0 on */
-		else
-			reg0x0c |= 0x40; /* OP1 on, OP0 off */
-		break;
-	case SEC_VOLTAGE_18:
-		reg0x0c |= 0x50; /* OP1 on, OP0 on */
-		break;
-	case SEC_VOLTAGE_OFF:
-		/* LNB power off! */
-		reg0x08 = 0x00;
-		reg0x0c = 0x00;
-		break;
-	default:
-		return -EINVAL;
-	};
-
-	if (state->config->op0_off)
-		reg0x0c &= ~0x10;
-
-	stv0299_writeregI(state, 0x08, reg0x08);
-	return stv0299_writeregI(state, 0x0c, reg0x0c);
-}
-
-static int stv0299_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long cmd)
-{
-	struct stv0299_state* state = fe->demodulator_priv;
-	u8 reg0x08;
-	u8 reg0x0c;
-	u8 lv_mask = 0x40;
-	u8 last = 1;
-	int i;
-	struct timeval nexttime;
-	struct timeval tv[10];
-
-	reg0x08 = stv0299_readreg (state, 0x08);
-	reg0x0c = stv0299_readreg (state, 0x0c);
-	reg0x0c &= 0x0f;
-	stv0299_writeregI (state, 0x08, (reg0x08 & 0x3f) | (state->config->lock_output << 6));
-	if (state->config->volt13_op0_op1 == STV0299_VOLT13_OP0)
-		lv_mask = 0x10;
-
-	cmd = cmd << 1;
-	if (debug_legacy_dish_switch)
-		printk ("%s switch command: 0x%04lx\n",__func__, cmd);
-
-	do_gettimeofday (&nexttime);
-	if (debug_legacy_dish_switch)
-		memcpy (&tv[0], &nexttime, sizeof (struct timeval));
-	stv0299_writeregI (state, 0x0c, reg0x0c | 0x50); /* set LNB to 18V */
-
-	dvb_frontend_sleep_until(&nexttime, 32000);
-
-	for (i=0; i<9; i++) {
-		if (debug_legacy_dish_switch)
-			do_gettimeofday (&tv[i+1]);
-		if((cmd & 0x01) != last) {
-			/* set voltage to (last ? 13V : 18V) */
-			stv0299_writeregI (state, 0x0c, reg0x0c | (last ? lv_mask : 0x50));
-			last = (last) ? 0 : 1;
-		}
-
-		cmd = cmd >> 1;
-
-		if (i != 8)
-			dvb_frontend_sleep_until(&nexttime, 8000);
-	}
-	if (debug_legacy_dish_switch) {
-		printk ("%s(%d): switch delay (should be 32k followed by all 8k\n",
-			__func__, fe->dvb->num);
-		for (i = 1; i < 10; i++)
-			printk ("%d: %d\n", i, timeval_usec_diff(tv[i-1] , tv[i]));
-	}
-
-	return 0;
-}
-
-static int stv0299_init (struct dvb_frontend* fe)
-{
-	struct stv0299_state* state = fe->demodulator_priv;
-	int i;
-	u8 reg;
-	u8 val;
-
-	dprintk("stv0299: init chip\n");
-
-	stv0299_writeregI(state, 0x02, 0x30 | state->mcr_reg);
-	msleep(50);
-
-	for (i = 0; ; i += 2)  {
-		reg = state->config->inittab[i];
-		val = state->config->inittab[i+1];
-		if (reg == 0xff && val == 0xff)
-			break;
-		if (reg == 0x0c && state->config->op0_off)
-			val &= ~0x10;
-		if (reg == 0x2)
-			state->mcr_reg = val & 0xf;
-		stv0299_writeregI(state, reg, val);
-	}
-
-	return 0;
-}
-
-static int stv0299_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct stv0299_state* state = fe->demodulator_priv;
-
-	u8 signal = 0xff - stv0299_readreg (state, 0x18);
-	u8 sync = stv0299_readreg (state, 0x1b);
-
-	dprintk ("%s : FE_READ_STATUS : VSTATUS: 0x%02x\n", __func__, sync);
-	*status = 0;
-
-	if (signal > 10)
-		*status |= FE_HAS_SIGNAL;
-
-	if (sync & 0x80)
-		*status |= FE_HAS_CARRIER;
-
-	if (sync & 0x10)
-		*status |= FE_HAS_VITERBI;
-
-	if (sync & 0x08)
-		*status |= FE_HAS_SYNC;
-
-	if ((sync & 0x98) == 0x98)
-		*status |= FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int stv0299_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct stv0299_state* state = fe->demodulator_priv;
-
-	if (state->errmode != STATUS_BER)
-		return -ENOSYS;
-
-	*ber = stv0299_readreg(state, 0x1e) | (stv0299_readreg(state, 0x1d) << 8);
-
-	return 0;
-}
-
-static int stv0299_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	struct stv0299_state* state = fe->demodulator_priv;
-
-	s32 signal =  0xffff - ((stv0299_readreg (state, 0x18) << 8)
-			       | stv0299_readreg (state, 0x19));
-
-	dprintk ("%s : FE_READ_SIGNAL_STRENGTH : AGC2I: 0x%02x%02x, signal=0x%04x\n", __func__,
-		 stv0299_readreg (state, 0x18),
-		 stv0299_readreg (state, 0x19), (int) signal);
-
-	signal = signal * 5 / 4;
-	*strength = (signal > 0xffff) ? 0xffff : (signal < 0) ? 0 : signal;
-
-	return 0;
-}
-
-static int stv0299_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct stv0299_state* state = fe->demodulator_priv;
-
-	s32 xsnr = 0xffff - ((stv0299_readreg (state, 0x24) << 8)
-			   | stv0299_readreg (state, 0x25));
-	xsnr = 3 * (xsnr - 0xa100);
-	*snr = (xsnr > 0xffff) ? 0xffff : (xsnr < 0) ? 0 : xsnr;
-
-	return 0;
-}
-
-static int stv0299_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct stv0299_state* state = fe->demodulator_priv;
-
-	if (state->errmode != STATUS_UCBLOCKS)
-		return -ENOSYS;
-
-	state->ucblocks += stv0299_readreg(state, 0x1e);
-	state->ucblocks += (stv0299_readreg(state, 0x1d) << 8);
-	*ucblocks = state->ucblocks;
-
-	return 0;
-}
-
-static int stv0299_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct stv0299_state* state = fe->demodulator_priv;
-	int invval = 0;
-
-	dprintk ("%s : FE_SET_FRONTEND\n", __func__);
-	if (state->config->set_ts_params)
-		state->config->set_ts_params(fe, 0);
-
-	// set the inversion
-	if (p->inversion == INVERSION_OFF) invval = 0;
-	else if (p->inversion == INVERSION_ON) invval = 1;
-	else {
-		printk("stv0299 does not support auto-inversion\n");
-		return -EINVAL;
-	}
-	if (state->config->invert) invval = (~invval) & 1;
-	stv0299_writeregI(state, 0x0c, (stv0299_readreg(state, 0x0c) & 0xfe) | invval);
-
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	stv0299_set_FEC(state, p->fec_inner);
-	stv0299_set_symbolrate(fe, p->symbol_rate);
-	stv0299_writeregI(state, 0x22, 0x00);
-	stv0299_writeregI(state, 0x23, 0x00);
-
-	state->tuner_frequency = p->frequency;
-	state->fec_inner = p->fec_inner;
-	state->symbol_rate = p->symbol_rate;
-
-	return 0;
-}
-
-static int stv0299_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct stv0299_state* state = fe->demodulator_priv;
-	s32 derot_freq;
-	int invval;
-
-	derot_freq = (s32)(s16) ((stv0299_readreg (state, 0x22) << 8)
-				| stv0299_readreg (state, 0x23));
-
-	derot_freq *= (state->config->mclk >> 16);
-	derot_freq += 500;
-	derot_freq /= 1000;
-
-	p->frequency += derot_freq;
-
-	invval = stv0299_readreg (state, 0x0c) & 1;
-	if (state->config->invert) invval = (~invval) & 1;
-	p->inversion = invval ? INVERSION_ON : INVERSION_OFF;
-
-	p->fec_inner = stv0299_get_fec(state);
-	p->symbol_rate = stv0299_get_symbolrate(state);
-
-	return 0;
-}
-
-static int stv0299_sleep(struct dvb_frontend* fe)
-{
-	struct stv0299_state* state = fe->demodulator_priv;
-
-	stv0299_writeregI(state, 0x02, 0xb0 | state->mcr_reg);
-	state->initialised = 0;
-
-	return 0;
-}
-
-static int stv0299_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
-{
-	struct stv0299_state* state = fe->demodulator_priv;
-
-	if (enable) {
-		stv0299_writeregI(state, 0x05, 0xb5);
-	} else {
-		stv0299_writeregI(state, 0x05, 0x35);
-	}
-	udelay(1);
-	return 0;
-}
-
-static int stv0299_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
-{
-	struct stv0299_state* state = fe->demodulator_priv;
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-
-	fesettings->min_delay_ms = state->config->min_delay_ms;
-	if (p->symbol_rate < 10000000) {
-		fesettings->step_size = p->symbol_rate / 32000;
-		fesettings->max_drift = 5000;
-	} else {
-		fesettings->step_size = p->symbol_rate / 16000;
-		fesettings->max_drift = p->symbol_rate / 2000;
-	}
-	return 0;
-}
-
-static void stv0299_release(struct dvb_frontend* fe)
-{
-	struct stv0299_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops stv0299_ops;
-
-struct dvb_frontend* stv0299_attach(const struct stv0299_config* config,
-				    struct i2c_adapter* i2c)
-{
-	struct stv0299_state* state = NULL;
-	int id;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct stv0299_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->initialised = 0;
-	state->tuner_frequency = 0;
-	state->symbol_rate = 0;
-	state->fec_inner = 0;
-	state->errmode = STATUS_BER;
-
-	/* check if the demod is there */
-	stv0299_writeregI(state, 0x02, 0x30); /* standby off */
-	msleep(200);
-	id = stv0299_readreg(state, 0x00);
-
-	/* register 0x00 contains 0xa1 for STV0299 and STV0299B */
-	/* register 0x00 might contain 0x80 when returning from standby */
-	if (id != 0xa1 && id != 0x80) goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &stv0299_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops stv0299_ops = {
-	.delsys = { SYS_DVBS },
-	.info = {
-		.name			= "ST STV0299 DVB-S",
-		.frequency_min		= 950000,
-		.frequency_max		= 2150000,
-		.frequency_stepsize	= 125,	 /* kHz for QPSK frontends */
-		.frequency_tolerance	= 0,
-		.symbol_rate_min	= 1000000,
-		.symbol_rate_max	= 45000000,
-		.symbol_rate_tolerance	= 500,	/* ppm */
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-		      FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
-		      FE_CAN_QPSK |
-		      FE_CAN_FEC_AUTO
-	},
-
-	.release = stv0299_release,
-
-	.init = stv0299_init,
-	.sleep = stv0299_sleep,
-	.write = stv0299_write,
-	.i2c_gate_ctrl = stv0299_i2c_gate_ctrl,
-
-	.set_frontend = stv0299_set_frontend,
-	.get_frontend = stv0299_get_frontend,
-	.get_tune_settings = stv0299_get_tune_settings,
-
-	.read_status = stv0299_read_status,
-	.read_ber = stv0299_read_ber,
-	.read_signal_strength = stv0299_read_signal_strength,
-	.read_snr = stv0299_read_snr,
-	.read_ucblocks = stv0299_read_ucblocks,
-
-	.diseqc_send_master_cmd = stv0299_send_diseqc_msg,
-	.diseqc_send_burst = stv0299_send_diseqc_burst,
-	.set_tone = stv0299_set_tone,
-	.set_voltage = stv0299_set_voltage,
-	.dishnetwork_send_legacy_command = stv0299_send_legacy_dish_cmd,
-};
-
-module_param(debug_legacy_dish_switch, int, 0444);
-MODULE_PARM_DESC(debug_legacy_dish_switch, "Enable timing analysis for Dish Network legacy switches");
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("ST STV0299 DVB Demodulator driver");
-MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Peter Schildmann, Felix Domke, "
-	      "Andreas Oberritter, Andrew de Quincey, Kenneth Aafly");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(stv0299_attach);
diff --git a/drivers/media/dvb/frontends/stv0299.h b/drivers/media/dvb/frontends/stv0299.h
deleted file mode 100644
index ba219b7..0000000
--- a/drivers/media/dvb/frontends/stv0299.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
-    Driver for ST STV0299 demodulator
-
-    Copyright (C) 2001-2002 Convergence Integrated Media GmbH
-	<ralph@convergence.de>,
-	<holger@convergence.de>,
-	<js@convergence.de>
-
-
-    Philips SU1278/SH
-
-    Copyright (C) 2002 by Peter Schildmann <peter.schildmann@web.de>
-
-
-    LG TDQF-S001F
-
-    Copyright (C) 2002 Felix Domke <tmbinc@elitedvb.net>
-		     & Andreas Oberritter <obi@linuxtv.org>
-
-
-    Support for Samsung TBMU24112IMB used on Technisat SkyStar2 rev. 2.6B
-
-    Copyright (C) 2003 Vadim Catana <skystar@moldova.cc>:
-
-    Support for Philips SU1278 on Technotrend hardware
-
-    Copyright (C) 2004 Andrew de Quincey <adq_dvb@lidskialf.net>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef STV0299_H
-#define STV0299_H
-
-#include <linux/dvb/frontend.h>
-#include "dvb_frontend.h"
-
-#define STV0299_LOCKOUTPUT_0  0
-#define STV0299_LOCKOUTPUT_1  1
-#define STV0299_LOCKOUTPUT_CF 2
-#define STV0299_LOCKOUTPUT_LK 3
-
-#define STV0299_VOLT13_OP0 0
-#define STV0299_VOLT13_OP1 1
-
-struct stv0299_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* inittab - array of pairs of values.
-	 * First of each pair is the register, second is the value.
-	 * List should be terminated with an 0xff, 0xff pair.
-	 */
-	const u8* inittab;
-
-	/* master clock to use */
-	u32 mclk;
-
-	/* does the inversion require inversion? */
-	u8 invert:1;
-
-	/* Skip reinitialisation? */
-	u8 skip_reinit:1;
-
-	/* LOCK OUTPUT setting */
-	u8 lock_output:2;
-
-	/* Is 13v controlled by OP0 or OP1? */
-	u8 volt13_op0_op1:1;
-
-	/* Turn-off OP0? */
-	u8 op0_off:1;
-
-	/* minimum delay before retuning */
-	int min_delay_ms;
-
-	/* Set the symbol rate */
-	int (*set_symbol_rate)(struct dvb_frontend *fe, u32 srate, u32 ratio);
-
-	/* Set device param to start dma */
-	int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured);
-};
-
-#if defined(CONFIG_DVB_STV0299) || (defined(CONFIG_DVB_STV0299_MODULE) && defined(MODULE))
-extern struct dvb_frontend *stv0299_attach(const struct stv0299_config *config,
-					   struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *stv0299_attach(const struct stv0299_config *config,
-					   struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_STV0299
-
-static inline int stv0299_writereg(struct dvb_frontend *fe, u8 reg, u8 val) {
-	int r = 0;
-	u8 buf[] = {reg, val};
-	if (fe->ops.write)
-		r = fe->ops.write(fe, buf, 2);
-	return r;
-}
-
-#endif // STV0299_H
diff --git a/drivers/media/dvb/frontends/stv0367.c b/drivers/media/dvb/frontends/stv0367.c
deleted file mode 100644
index 2a8aaeb..0000000
--- a/drivers/media/dvb/frontends/stv0367.c
+++ /dev/null
@@ -1,3450 +0,0 @@
-/*
- * stv0367.c
- *
- * Driver for ST STV0367 DVB-T & DVB-C demodulator IC.
- *
- * Copyright (C) ST Microelectronics.
- * Copyright (C) 2010,2011 NetUP Inc.
- * Copyright (C) 2010,2011 Igor M. Liplianin <liplianin@netup.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-
-#include "stv0367.h"
-#include "stv0367_regs.h"
-#include "stv0367_priv.h"
-
-static int stvdebug;
-module_param_named(debug, stvdebug, int, 0644);
-
-static int i2cdebug;
-module_param_named(i2c_debug, i2cdebug, int, 0644);
-
-#define dprintk(args...) \
-	do { \
-		if (stvdebug) \
-			printk(KERN_DEBUG args); \
-	} while (0)
-	/* DVB-C */
-
-struct stv0367cab_state {
-	enum stv0367_cab_signal_type	state;
-	u32	mclk;
-	u32	adc_clk;
-	s32	search_range;
-	s32	derot_offset;
-	/* results */
-	int locked;			/* channel found		*/
-	u32 freq_khz;			/* found frequency (in kHz)	*/
-	u32 symbol_rate;		/* found symbol rate (in Bds)	*/
-	enum stv0367cab_mod modulation;	/* modulation			*/
-	fe_spectral_inversion_t	spect_inv; /* Spectrum Inversion	*/
-};
-
-struct stv0367ter_state {
-	/* DVB-T */
-	enum stv0367_ter_signal_type state;
-	enum stv0367_ter_if_iq_mode if_iq_mode;
-	enum stv0367_ter_mode mode;/* mode 2K or 8K */
-	fe_guard_interval_t guard;
-	enum stv0367_ter_hierarchy hierarchy;
-	u32 frequency;
-	fe_spectral_inversion_t  sense; /*  current search spectrum */
-	u8  force; /* force mode/guard */
-	u8  bw; /* channel width 6, 7 or 8 in MHz */
-	u8  pBW; /* channel width used during previous lock */
-	u32 pBER;
-	u32 pPER;
-	u32 ucblocks;
-	s8  echo_pos; /* echo position */
-	u8  first_lock;
-	u8  unlock_counter;
-	u32 agc_val;
-};
-
-struct stv0367_state {
-	struct dvb_frontend fe;
-	struct i2c_adapter *i2c;
-	/* config settings */
-	const struct stv0367_config *config;
-	u8 chip_id;
-	/* DVB-C */
-	struct stv0367cab_state *cab_state;
-	/* DVB-T */
-	struct stv0367ter_state *ter_state;
-};
-
-struct st_register {
-	u16	addr;
-	u8	value;
-};
-
-/* values for STV4100 XTAL=30M int clk=53.125M*/
-static struct st_register def0367ter[STV0367TER_NBREGS] = {
-	{R367TER_ID,		0x60},
-	{R367TER_I2CRPT,	0xa0},
-	/* {R367TER_I2CRPT,	0x22},*/
-	{R367TER_TOPCTRL,	0x00},/* for xc5000; was 0x02 */
-	{R367TER_IOCFG0,	0x40},
-	{R367TER_DAC0R,		0x00},
-	{R367TER_IOCFG1,	0x00},
-	{R367TER_DAC1R,		0x00},
-	{R367TER_IOCFG2,	0x62},
-	{R367TER_SDFR,		0x00},
-	{R367TER_STATUS,	0xf8},
-	{R367TER_AUX_CLK,	0x0a},
-	{R367TER_FREESYS1,	0x00},
-	{R367TER_FREESYS2,	0x00},
-	{R367TER_FREESYS3,	0x00},
-	{R367TER_GPIO_CFG,	0x55},
-	{R367TER_GPIO_CMD,	0x00},
-	{R367TER_AGC2MAX,	0xff},
-	{R367TER_AGC2MIN,	0x00},
-	{R367TER_AGC1MAX,	0xff},
-	{R367TER_AGC1MIN,	0x00},
-	{R367TER_AGCR,		0xbc},
-	{R367TER_AGC2TH,	0x00},
-	{R367TER_AGC12C,	0x00},
-	{R367TER_AGCCTRL1,	0x85},
-	{R367TER_AGCCTRL2,	0x1f},
-	{R367TER_AGC1VAL1,	0x00},
-	{R367TER_AGC1VAL2,	0x00},
-	{R367TER_AGC2VAL1,	0x6f},
-	{R367TER_AGC2VAL2,	0x05},
-	{R367TER_AGC2PGA,	0x00},
-	{R367TER_OVF_RATE1,	0x00},
-	{R367TER_OVF_RATE2,	0x00},
-	{R367TER_GAIN_SRC1,	0xaa},/* for xc5000; was 0x2b */
-	{R367TER_GAIN_SRC2,	0xd6},/* for xc5000; was 0x04 */
-	{R367TER_INC_DEROT1,	0x55},
-	{R367TER_INC_DEROT2,	0x55},
-	{R367TER_PPM_CPAMP_DIR,	0x2c},
-	{R367TER_PPM_CPAMP_INV,	0x00},
-	{R367TER_FREESTFE_1,	0x00},
-	{R367TER_FREESTFE_2,	0x1c},
-	{R367TER_DCOFFSET,	0x00},
-	{R367TER_EN_PROCESS,	0x05},
-	{R367TER_SDI_SMOOTHER,	0x80},
-	{R367TER_FE_LOOP_OPEN,	0x1c},
-	{R367TER_FREQOFF1,	0x00},
-	{R367TER_FREQOFF2,	0x00},
-	{R367TER_FREQOFF3,	0x00},
-	{R367TER_TIMOFF1,	0x00},
-	{R367TER_TIMOFF2,	0x00},
-	{R367TER_EPQ,		0x02},
-	{R367TER_EPQAUTO,	0x01},
-	{R367TER_SYR_UPDATE,	0xf5},
-	{R367TER_CHPFREE,	0x00},
-	{R367TER_PPM_STATE_MAC,	0x23},
-	{R367TER_INR_THRESHOLD,	0xff},
-	{R367TER_EPQ_TPS_ID_CELL, 0xf9},
-	{R367TER_EPQ_CFG,	0x00},
-	{R367TER_EPQ_STATUS,	0x01},
-	{R367TER_AUTORELOCK,	0x81},
-	{R367TER_BER_THR_VMSB,	0x00},
-	{R367TER_BER_THR_MSB,	0x00},
-	{R367TER_BER_THR_LSB,	0x00},
-	{R367TER_CCD,		0x83},
-	{R367TER_SPECTR_CFG,	0x00},
-	{R367TER_CHC_DUMMY,	0x18},
-	{R367TER_INC_CTL,	0x88},
-	{R367TER_INCTHRES_COR1,	0xb4},
-	{R367TER_INCTHRES_COR2,	0x96},
-	{R367TER_INCTHRES_DET1,	0x0e},
-	{R367TER_INCTHRES_DET2,	0x11},
-	{R367TER_IIR_CELLNB,	0x8d},
-	{R367TER_IIRCX_COEFF1_MSB, 0x00},
-	{R367TER_IIRCX_COEFF1_LSB, 0x00},
-	{R367TER_IIRCX_COEFF2_MSB, 0x09},
-	{R367TER_IIRCX_COEFF2_LSB, 0x18},
-	{R367TER_IIRCX_COEFF3_MSB, 0x14},
-	{R367TER_IIRCX_COEFF3_LSB, 0x9c},
-	{R367TER_IIRCX_COEFF4_MSB, 0x00},
-	{R367TER_IIRCX_COEFF4_LSB, 0x00},
-	{R367TER_IIRCX_COEFF5_MSB, 0x36},
-	{R367TER_IIRCX_COEFF5_LSB, 0x42},
-	{R367TER_FEPATH_CFG,	0x00},
-	{R367TER_PMC1_FUNC,	0x65},
-	{R367TER_PMC1_FOR,	0x00},
-	{R367TER_PMC2_FUNC,	0x00},
-	{R367TER_STATUS_ERR_DA,	0xe0},
-	{R367TER_DIG_AGC_R,	0xfe},
-	{R367TER_COMAGC_TARMSB,	0x0b},
-	{R367TER_COM_AGC_TAR_ENMODE, 0x41},
-	{R367TER_COM_AGC_CFG,	0x3e},
-	{R367TER_COM_AGC_GAIN1, 0x39},
-	{R367TER_AUT_AGC_TARGETMSB, 0x0b},
-	{R367TER_LOCK_DET_MSB,	0x01},
-	{R367TER_AGCTAR_LOCK_LSBS, 0x40},
-	{R367TER_AUT_GAIN_EN,	0xf4},
-	{R367TER_AUT_CFG,	0xf0},
-	{R367TER_LOCKN,		0x23},
-	{R367TER_INT_X_3,	0x00},
-	{R367TER_INT_X_2,	0x03},
-	{R367TER_INT_X_1,	0x8d},
-	{R367TER_INT_X_0,	0xa0},
-	{R367TER_MIN_ERRX_MSB,	0x00},
-	{R367TER_COR_CTL,	0x23},
-	{R367TER_COR_STAT,	0xf6},
-	{R367TER_COR_INTEN,	0x00},
-	{R367TER_COR_INTSTAT,	0x3f},
-	{R367TER_COR_MODEGUARD,	0x03},
-	{R367TER_AGC_CTL,	0x08},
-	{R367TER_AGC_MANUAL1,	0x00},
-	{R367TER_AGC_MANUAL2,	0x00},
-	{R367TER_AGC_TARG,	0x16},
-	{R367TER_AGC_GAIN1,	0x53},
-	{R367TER_AGC_GAIN2,	0x1d},
-	{R367TER_RESERVED_1,	0x00},
-	{R367TER_RESERVED_2,	0x00},
-	{R367TER_RESERVED_3,	0x00},
-	{R367TER_CAS_CTL,	0x44},
-	{R367TER_CAS_FREQ,	0xb3},
-	{R367TER_CAS_DAGCGAIN,	0x12},
-	{R367TER_SYR_CTL,	0x04},
-	{R367TER_SYR_STAT,	0x10},
-	{R367TER_SYR_NCO1,	0x00},
-	{R367TER_SYR_NCO2,	0x00},
-	{R367TER_SYR_OFFSET1,	0x00},
-	{R367TER_SYR_OFFSET2,	0x00},
-	{R367TER_FFT_CTL,	0x00},
-	{R367TER_SCR_CTL,	0x70},
-	{R367TER_PPM_CTL1,	0xf8},
-	{R367TER_TRL_CTL,	0x14},/* for xc5000; was 0xac */
-	{R367TER_TRL_NOMRATE1,	0xae},/* for xc5000; was 0x1e */
-	{R367TER_TRL_NOMRATE2,	0x56},/* for xc5000; was 0x58 */
-	{R367TER_TRL_TIME1,	0x1d},
-	{R367TER_TRL_TIME2,	0xfc},
-	{R367TER_CRL_CTL,	0x24},
-	{R367TER_CRL_FREQ1,	0xad},
-	{R367TER_CRL_FREQ2,	0x9d},
-	{R367TER_CRL_FREQ3,	0xff},
-	{R367TER_CHC_CTL,	0x01},
-	{R367TER_CHC_SNR,	0xf0},
-	{R367TER_BDI_CTL,	0x00},
-	{R367TER_DMP_CTL,	0x00},
-	{R367TER_TPS_RCVD1,	0x30},
-	{R367TER_TPS_RCVD2,	0x02},
-	{R367TER_TPS_RCVD3,	0x01},
-	{R367TER_TPS_RCVD4,	0x00},
-	{R367TER_TPS_ID_CELL1,	0x00},
-	{R367TER_TPS_ID_CELL2,	0x00},
-	{R367TER_TPS_RCVD5_SET1, 0x02},
-	{R367TER_TPS_SET2,	0x02},
-	{R367TER_TPS_SET3,	0x01},
-	{R367TER_TPS_CTL,	0x00},
-	{R367TER_CTL_FFTOSNUM,	0x34},
-	{R367TER_TESTSELECT,	0x09},
-	{R367TER_MSC_REV,	0x0a},
-	{R367TER_PIR_CTL,	0x00},
-	{R367TER_SNR_CARRIER1,	0xa1},
-	{R367TER_SNR_CARRIER2,	0x9a},
-	{R367TER_PPM_CPAMP,	0x2c},
-	{R367TER_TSM_AP0,	0x00},
-	{R367TER_TSM_AP1,	0x00},
-	{R367TER_TSM_AP2 ,	0x00},
-	{R367TER_TSM_AP3,	0x00},
-	{R367TER_TSM_AP4,	0x00},
-	{R367TER_TSM_AP5,	0x00},
-	{R367TER_TSM_AP6,	0x00},
-	{R367TER_TSM_AP7,	0x00},
-	{R367TER_TSTRES,	0x00},
-	{R367TER_ANACTRL,	0x0D},/* PLL stoped, restart at init!!! */
-	{R367TER_TSTBUS,	0x00},
-	{R367TER_TSTRATE,	0x00},
-	{R367TER_CONSTMODE,	0x01},
-	{R367TER_CONSTCARR1,	0x00},
-	{R367TER_CONSTCARR2,	0x00},
-	{R367TER_ICONSTEL,	0x0a},
-	{R367TER_QCONSTEL,	0x15},
-	{R367TER_TSTBISTRES0,	0x00},
-	{R367TER_TSTBISTRES1,	0x00},
-	{R367TER_TSTBISTRES2,	0x28},
-	{R367TER_TSTBISTRES3,	0x00},
-	{R367TER_RF_AGC1,	0xff},
-	{R367TER_RF_AGC2,	0x83},
-	{R367TER_ANADIGCTRL,	0x19},
-	{R367TER_PLLMDIV,	0x01},/* for xc5000; was 0x0c */
-	{R367TER_PLLNDIV,	0x06},/* for xc5000; was 0x55 */
-	{R367TER_PLLSETUP,	0x18},
-	{R367TER_DUAL_AD12,	0x0C},/* for xc5000 AGC voltage 1.6V */
-	{R367TER_TSTBIST,	0x00},
-	{R367TER_PAD_COMP_CTRL,	0x00},
-	{R367TER_PAD_COMP_WR,	0x00},
-	{R367TER_PAD_COMP_RD,	0xe0},
-	{R367TER_SYR_TARGET_FFTADJT_MSB, 0x00},
-	{R367TER_SYR_TARGET_FFTADJT_LSB, 0x00},
-	{R367TER_SYR_TARGET_CHCADJT_MSB, 0x00},
-	{R367TER_SYR_TARGET_CHCADJT_LSB, 0x00},
-	{R367TER_SYR_FLAG,	0x00},
-	{R367TER_CRL_TARGET1,	0x00},
-	{R367TER_CRL_TARGET2,	0x00},
-	{R367TER_CRL_TARGET3,	0x00},
-	{R367TER_CRL_TARGET4,	0x00},
-	{R367TER_CRL_FLAG,	0x00},
-	{R367TER_TRL_TARGET1,	0x00},
-	{R367TER_TRL_TARGET2,	0x00},
-	{R367TER_TRL_CHC,	0x00},
-	{R367TER_CHC_SNR_TARG,	0x00},
-	{R367TER_TOP_TRACK,	0x00},
-	{R367TER_TRACKER_FREE1,	0x00},
-	{R367TER_ERROR_CRL1,	0x00},
-	{R367TER_ERROR_CRL2,	0x00},
-	{R367TER_ERROR_CRL3,	0x00},
-	{R367TER_ERROR_CRL4,	0x00},
-	{R367TER_DEC_NCO1,	0x2c},
-	{R367TER_DEC_NCO2,	0x0f},
-	{R367TER_DEC_NCO3,	0x20},
-	{R367TER_SNR,		0xf1},
-	{R367TER_SYR_FFTADJ1,	0x00},
-	{R367TER_SYR_FFTADJ2,	0x00},
-	{R367TER_SYR_CHCADJ1,	0x00},
-	{R367TER_SYR_CHCADJ2,	0x00},
-	{R367TER_SYR_OFF,	0x00},
-	{R367TER_PPM_OFFSET1,	0x00},
-	{R367TER_PPM_OFFSET2,	0x03},
-	{R367TER_TRACKER_FREE2,	0x00},
-	{R367TER_DEBG_LT10,	0x00},
-	{R367TER_DEBG_LT11,	0x00},
-	{R367TER_DEBG_LT12,	0x00},
-	{R367TER_DEBG_LT13,	0x00},
-	{R367TER_DEBG_LT14,	0x00},
-	{R367TER_DEBG_LT15,	0x00},
-	{R367TER_DEBG_LT16,	0x00},
-	{R367TER_DEBG_LT17,	0x00},
-	{R367TER_DEBG_LT18,	0x00},
-	{R367TER_DEBG_LT19,	0x00},
-	{R367TER_DEBG_LT1A,	0x00},
-	{R367TER_DEBG_LT1B,	0x00},
-	{R367TER_DEBG_LT1C,	0x00},
-	{R367TER_DEBG_LT1D,	0x00},
-	{R367TER_DEBG_LT1E,	0x00},
-	{R367TER_DEBG_LT1F,	0x00},
-	{R367TER_RCCFGH,	0x00},
-	{R367TER_RCCFGM,	0x00},
-	{R367TER_RCCFGL,	0x00},
-	{R367TER_RCINSDELH,	0x00},
-	{R367TER_RCINSDELM,	0x00},
-	{R367TER_RCINSDELL,	0x00},
-	{R367TER_RCSTATUS,	0x00},
-	{R367TER_RCSPEED,	0x6f},
-	{R367TER_RCDEBUGM,	0xe7},
-	{R367TER_RCDEBUGL,	0x9b},
-	{R367TER_RCOBSCFG,	0x00},
-	{R367TER_RCOBSM,	0x00},
-	{R367TER_RCOBSL,	0x00},
-	{R367TER_RCFECSPY,	0x00},
-	{R367TER_RCFSPYCFG,	0x00},
-	{R367TER_RCFSPYDATA,	0x00},
-	{R367TER_RCFSPYOUT,	0x00},
-	{R367TER_RCFSTATUS,	0x00},
-	{R367TER_RCFGOODPACK,	0x00},
-	{R367TER_RCFPACKCNT,	0x00},
-	{R367TER_RCFSPYMISC,	0x00},
-	{R367TER_RCFBERCPT4,	0x00},
-	{R367TER_RCFBERCPT3,	0x00},
-	{R367TER_RCFBERCPT2,	0x00},
-	{R367TER_RCFBERCPT1,	0x00},
-	{R367TER_RCFBERCPT0,	0x00},
-	{R367TER_RCFBERERR2,	0x00},
-	{R367TER_RCFBERERR1,	0x00},
-	{R367TER_RCFBERERR0,	0x00},
-	{R367TER_RCFSTATESM,	0x00},
-	{R367TER_RCFSTATESL,	0x00},
-	{R367TER_RCFSPYBER,	0x00},
-	{R367TER_RCFSPYDISTM,	0x00},
-	{R367TER_RCFSPYDISTL,	0x00},
-	{R367TER_RCFSPYOBS7,	0x00},
-	{R367TER_RCFSPYOBS6,	0x00},
-	{R367TER_RCFSPYOBS5,	0x00},
-	{R367TER_RCFSPYOBS4,	0x00},
-	{R367TER_RCFSPYOBS3,	0x00},
-	{R367TER_RCFSPYOBS2,	0x00},
-	{R367TER_RCFSPYOBS1,	0x00},
-	{R367TER_RCFSPYOBS0,	0x00},
-	{R367TER_TSGENERAL,	0x00},
-	{R367TER_RC1SPEED,	0x6f},
-	{R367TER_TSGSTATUS,	0x18},
-	{R367TER_FECM,		0x01},
-	{R367TER_VTH12,		0xff},
-	{R367TER_VTH23,		0xa1},
-	{R367TER_VTH34,		0x64},
-	{R367TER_VTH56,		0x40},
-	{R367TER_VTH67,		0x00},
-	{R367TER_VTH78,		0x2c},
-	{R367TER_VITCURPUN,	0x12},
-	{R367TER_VERROR,	0x01},
-	{R367TER_PRVIT,		0x3f},
-	{R367TER_VAVSRVIT,	0x00},
-	{R367TER_VSTATUSVIT,	0xbd},
-	{R367TER_VTHINUSE,	0xa1},
-	{R367TER_KDIV12,	0x20},
-	{R367TER_KDIV23,	0x40},
-	{R367TER_KDIV34,	0x20},
-	{R367TER_KDIV56,	0x30},
-	{R367TER_KDIV67,	0x00},
-	{R367TER_KDIV78,	0x30},
-	{R367TER_SIGPOWER,	0x54},
-	{R367TER_DEMAPVIT,	0x40},
-	{R367TER_VITSCALE,	0x00},
-	{R367TER_FFEC1PRG,	0x00},
-	{R367TER_FVITCURPUN,	0x12},
-	{R367TER_FVERROR,	0x01},
-	{R367TER_FVSTATUSVIT,	0xbd},
-	{R367TER_DEBUG_LT1,	0x00},
-	{R367TER_DEBUG_LT2,	0x00},
-	{R367TER_DEBUG_LT3,	0x00},
-	{R367TER_TSTSFMET,	0x00},
-	{R367TER_SELOUT,	0x00},
-	{R367TER_TSYNC,		0x00},
-	{R367TER_TSTERR,	0x00},
-	{R367TER_TSFSYNC,	0x00},
-	{R367TER_TSTSFERR,	0x00},
-	{R367TER_TSTTSSF1,	0x01},
-	{R367TER_TSTTSSF2,	0x1f},
-	{R367TER_TSTTSSF3,	0x00},
-	{R367TER_TSTTS1,	0x00},
-	{R367TER_TSTTS2,	0x1f},
-	{R367TER_TSTTS3,	0x01},
-	{R367TER_TSTTS4,	0x00},
-	{R367TER_TSTTSRC,	0x00},
-	{R367TER_TSTTSRS,	0x00},
-	{R367TER_TSSTATEM,	0xb0},
-	{R367TER_TSSTATEL,	0x40},
-	{R367TER_TSCFGH,	0xC0},
-	{R367TER_TSCFGM,	0xc0},/* for xc5000; was 0x00 */
-	{R367TER_TSCFGL,	0x20},
-	{R367TER_TSSYNC,	0x00},
-	{R367TER_TSINSDELH,	0x00},
-	{R367TER_TSINSDELM,	0x00},
-	{R367TER_TSINSDELL,	0x00},
-	{R367TER_TSDIVN,	0x03},
-	{R367TER_TSDIVPM,	0x00},
-	{R367TER_TSDIVPL,	0x00},
-	{R367TER_TSDIVQM,	0x00},
-	{R367TER_TSDIVQL,	0x00},
-	{R367TER_TSDILSTKM,	0x00},
-	{R367TER_TSDILSTKL,	0x00},
-	{R367TER_TSSPEED,	0x40},/* for xc5000; was 0x6f */
-	{R367TER_TSSTATUS,	0x81},
-	{R367TER_TSSTATUS2,	0x6a},
-	{R367TER_TSBITRATEM,	0x0f},
-	{R367TER_TSBITRATEL,	0xc6},
-	{R367TER_TSPACKLENM,	0x00},
-	{R367TER_TSPACKLENL,	0xfc},
-	{R367TER_TSBLOCLENM,	0x0a},
-	{R367TER_TSBLOCLENL,	0x80},
-	{R367TER_TSDLYH,	0x90},
-	{R367TER_TSDLYM,	0x68},
-	{R367TER_TSDLYL,	0x01},
-	{R367TER_TSNPDAV,	0x00},
-	{R367TER_TSBUFSTATH,	0x00},
-	{R367TER_TSBUFSTATM,	0x00},
-	{R367TER_TSBUFSTATL,	0x00},
-	{R367TER_TSDEBUGM,	0xcf},
-	{R367TER_TSDEBUGL,	0x1e},
-	{R367TER_TSDLYSETH,	0x00},
-	{R367TER_TSDLYSETM,	0x68},
-	{R367TER_TSDLYSETL,	0x00},
-	{R367TER_TSOBSCFG,	0x00},
-	{R367TER_TSOBSM,	0x47},
-	{R367TER_TSOBSL,	0x1f},
-	{R367TER_ERRCTRL1,	0x95},
-	{R367TER_ERRCNT1H,	0x80},
-	{R367TER_ERRCNT1M,	0x00},
-	{R367TER_ERRCNT1L,	0x00},
-	{R367TER_ERRCTRL2,	0x95},
-	{R367TER_ERRCNT2H,	0x00},
-	{R367TER_ERRCNT2M,	0x00},
-	{R367TER_ERRCNT2L,	0x00},
-	{R367TER_FECSPY,	0x88},
-	{R367TER_FSPYCFG,	0x2c},
-	{R367TER_FSPYDATA,	0x3a},
-	{R367TER_FSPYOUT,	0x06},
-	{R367TER_FSTATUS,	0x61},
-	{R367TER_FGOODPACK,	0xff},
-	{R367TER_FPACKCNT,	0xff},
-	{R367TER_FSPYMISC,	0x66},
-	{R367TER_FBERCPT4,	0x00},
-	{R367TER_FBERCPT3,	0x00},
-	{R367TER_FBERCPT2,	0x36},
-	{R367TER_FBERCPT1,	0x36},
-	{R367TER_FBERCPT0,	0x14},
-	{R367TER_FBERERR2,	0x00},
-	{R367TER_FBERERR1,	0x03},
-	{R367TER_FBERERR0,	0x28},
-	{R367TER_FSTATESM,	0x00},
-	{R367TER_FSTATESL,	0x02},
-	{R367TER_FSPYBER,	0x00},
-	{R367TER_FSPYDISTM,	0x01},
-	{R367TER_FSPYDISTL,	0x9f},
-	{R367TER_FSPYOBS7,	0xc9},
-	{R367TER_FSPYOBS6,	0x99},
-	{R367TER_FSPYOBS5,	0x08},
-	{R367TER_FSPYOBS4,	0xec},
-	{R367TER_FSPYOBS3,	0x01},
-	{R367TER_FSPYOBS2,	0x0f},
-	{R367TER_FSPYOBS1,	0xf5},
-	{R367TER_FSPYOBS0,	0x08},
-	{R367TER_SFDEMAP,	0x40},
-	{R367TER_SFERROR,	0x00},
-	{R367TER_SFAVSR,	0x30},
-	{R367TER_SFECSTATUS,	0xcc},
-	{R367TER_SFKDIV12,	0x20},
-	{R367TER_SFKDIV23,	0x40},
-	{R367TER_SFKDIV34,	0x20},
-	{R367TER_SFKDIV56,	0x20},
-	{R367TER_SFKDIV67,	0x00},
-	{R367TER_SFKDIV78,	0x20},
-	{R367TER_SFDILSTKM,	0x00},
-	{R367TER_SFDILSTKL,	0x00},
-	{R367TER_SFSTATUS,	0xb5},
-	{R367TER_SFDLYH,	0x90},
-	{R367TER_SFDLYM,	0x60},
-	{R367TER_SFDLYL,	0x01},
-	{R367TER_SFDLYSETH,	0xc0},
-	{R367TER_SFDLYSETM,	0x60},
-	{R367TER_SFDLYSETL,	0x00},
-	{R367TER_SFOBSCFG,	0x00},
-	{R367TER_SFOBSM,	0x47},
-	{R367TER_SFOBSL,	0x05},
-	{R367TER_SFECINFO,	0x40},
-	{R367TER_SFERRCTRL,	0x74},
-	{R367TER_SFERRCNTH,	0x80},
-	{R367TER_SFERRCNTM ,	0x00},
-	{R367TER_SFERRCNTL,	0x00},
-	{R367TER_SYMBRATEM,	0x2f},
-	{R367TER_SYMBRATEL,	0x50},
-	{R367TER_SYMBSTATUS,	0x7f},
-	{R367TER_SYMBCFG,	0x00},
-	{R367TER_SYMBFIFOM,	0xf4},
-	{R367TER_SYMBFIFOL,	0x0d},
-	{R367TER_SYMBOFFSM,	0xf0},
-	{R367TER_SYMBOFFSL,	0x2d},
-	{R367TER_DEBUG_LT4,	0x00},
-	{R367TER_DEBUG_LT5,	0x00},
-	{R367TER_DEBUG_LT6,	0x00},
-	{R367TER_DEBUG_LT7,	0x00},
-	{R367TER_DEBUG_LT8,	0x00},
-	{R367TER_DEBUG_LT9,	0x00},
-};
-
-#define RF_LOOKUP_TABLE_SIZE  31
-#define RF_LOOKUP_TABLE2_SIZE 16
-/* RF Level (for RF AGC->AGC1) Lookup Table, depends on the board and tuner.*/
-s32 stv0367cab_RF_LookUp1[RF_LOOKUP_TABLE_SIZE][RF_LOOKUP_TABLE_SIZE] = {
-	{/*AGC1*/
-		48, 50, 51, 53, 54, 56, 57, 58, 60, 61, 62, 63,
-		64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75,
-		76, 77, 78, 80, 83, 85, 88,
-	}, {/*RF(dbm)*/
-		22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,
-		34, 35, 36, 37, 38, 39, 41, 42, 43, 44, 46, 47,
-		49, 50, 52, 53, 54, 55, 56,
-	}
-};
-/* RF Level (for IF AGC->AGC2) Lookup Table, depends on the board and tuner.*/
-s32 stv0367cab_RF_LookUp2[RF_LOOKUP_TABLE2_SIZE][RF_LOOKUP_TABLE2_SIZE] = {
-	{/*AGC2*/
-		28, 29, 31, 32, 34, 35, 36, 37,
-		38, 39, 40, 41, 42, 43, 44, 45,
-	}, {/*RF(dbm)*/
-		57, 58, 59, 60, 61, 62, 63, 64,
-		65, 66, 67, 68, 69, 70, 71, 72,
-	}
-};
-
-static struct st_register def0367cab[STV0367CAB_NBREGS] = {
-	{R367CAB_ID,		0x60},
-	{R367CAB_I2CRPT,	0xa0},
-	/*{R367CAB_I2CRPT,	0x22},*/
-	{R367CAB_TOPCTRL,	0x10},
-	{R367CAB_IOCFG0,	0x80},
-	{R367CAB_DAC0R,		0x00},
-	{R367CAB_IOCFG1,	0x00},
-	{R367CAB_DAC1R,		0x00},
-	{R367CAB_IOCFG2,	0x00},
-	{R367CAB_SDFR,		0x00},
-	{R367CAB_AUX_CLK,	0x00},
-	{R367CAB_FREESYS1,	0x00},
-	{R367CAB_FREESYS2,	0x00},
-	{R367CAB_FREESYS3,	0x00},
-	{R367CAB_GPIO_CFG,	0x55},
-	{R367CAB_GPIO_CMD,	0x01},
-	{R367CAB_TSTRES,	0x00},
-	{R367CAB_ANACTRL,	0x0d},/* was 0x00 need to check - I.M.L.*/
-	{R367CAB_TSTBUS,	0x00},
-	{R367CAB_RF_AGC1,	0xea},
-	{R367CAB_RF_AGC2,	0x82},
-	{R367CAB_ANADIGCTRL,	0x0b},
-	{R367CAB_PLLMDIV,	0x01},
-	{R367CAB_PLLNDIV,	0x08},
-	{R367CAB_PLLSETUP,	0x18},
-	{R367CAB_DUAL_AD12,	0x0C}, /* for xc5000 AGC voltage 1.6V */
-	{R367CAB_TSTBIST,	0x00},
-	{R367CAB_CTRL_1,	0x00},
-	{R367CAB_CTRL_2,	0x03},
-	{R367CAB_IT_STATUS1,	0x2b},
-	{R367CAB_IT_STATUS2,	0x08},
-	{R367CAB_IT_EN1,	0x00},
-	{R367CAB_IT_EN2,	0x00},
-	{R367CAB_CTRL_STATUS,	0x04},
-	{R367CAB_TEST_CTL,	0x00},
-	{R367CAB_AGC_CTL,	0x73},
-	{R367CAB_AGC_IF_CFG,	0x50},
-	{R367CAB_AGC_RF_CFG,	0x00},
-	{R367CAB_AGC_PWM_CFG,	0x03},
-	{R367CAB_AGC_PWR_REF_L,	0x5a},
-	{R367CAB_AGC_PWR_REF_H,	0x00},
-	{R367CAB_AGC_RF_TH_L,	0xff},
-	{R367CAB_AGC_RF_TH_H,	0x07},
-	{R367CAB_AGC_IF_LTH_L,	0x00},
-	{R367CAB_AGC_IF_LTH_H,	0x08},
-	{R367CAB_AGC_IF_HTH_L,	0xff},
-	{R367CAB_AGC_IF_HTH_H,	0x07},
-	{R367CAB_AGC_PWR_RD_L,	0xa0},
-	{R367CAB_AGC_PWR_RD_M,	0xe9},
-	{R367CAB_AGC_PWR_RD_H,	0x03},
-	{R367CAB_AGC_PWM_IFCMD_L,	0xe4},
-	{R367CAB_AGC_PWM_IFCMD_H,	0x00},
-	{R367CAB_AGC_PWM_RFCMD_L,	0xff},
-	{R367CAB_AGC_PWM_RFCMD_H,	0x07},
-	{R367CAB_IQDEM_CFG,	0x01},
-	{R367CAB_MIX_NCO_LL,	0x22},
-	{R367CAB_MIX_NCO_HL,	0x96},
-	{R367CAB_MIX_NCO_HH,	0x55},
-	{R367CAB_SRC_NCO_LL,	0xff},
-	{R367CAB_SRC_NCO_LH,	0x0c},
-	{R367CAB_SRC_NCO_HL,	0xf5},
-	{R367CAB_SRC_NCO_HH,	0x20},
-	{R367CAB_IQDEM_GAIN_SRC_L,	0x06},
-	{R367CAB_IQDEM_GAIN_SRC_H,	0x01},
-	{R367CAB_IQDEM_DCRM_CFG_LL,	0xfe},
-	{R367CAB_IQDEM_DCRM_CFG_LH,	0xff},
-	{R367CAB_IQDEM_DCRM_CFG_HL,	0x0f},
-	{R367CAB_IQDEM_DCRM_CFG_HH,	0x00},
-	{R367CAB_IQDEM_ADJ_COEFF0,	0x34},
-	{R367CAB_IQDEM_ADJ_COEFF1,	0xae},
-	{R367CAB_IQDEM_ADJ_COEFF2,	0x46},
-	{R367CAB_IQDEM_ADJ_COEFF3,	0x77},
-	{R367CAB_IQDEM_ADJ_COEFF4,	0x96},
-	{R367CAB_IQDEM_ADJ_COEFF5,	0x69},
-	{R367CAB_IQDEM_ADJ_COEFF6,	0xc7},
-	{R367CAB_IQDEM_ADJ_COEFF7,	0x01},
-	{R367CAB_IQDEM_ADJ_EN,	0x04},
-	{R367CAB_IQDEM_ADJ_AGC_REF,	0x94},
-	{R367CAB_ALLPASSFILT1,	0xc9},
-	{R367CAB_ALLPASSFILT2,	0x2d},
-	{R367CAB_ALLPASSFILT3,	0xa3},
-	{R367CAB_ALLPASSFILT4,	0xfb},
-	{R367CAB_ALLPASSFILT5,	0xf6},
-	{R367CAB_ALLPASSFILT6,	0x45},
-	{R367CAB_ALLPASSFILT7,	0x6f},
-	{R367CAB_ALLPASSFILT8,	0x7e},
-	{R367CAB_ALLPASSFILT9,	0x05},
-	{R367CAB_ALLPASSFILT10,	0x0a},
-	{R367CAB_ALLPASSFILT11,	0x51},
-	{R367CAB_TRL_AGC_CFG,	0x20},
-	{R367CAB_TRL_LPF_CFG,	0x28},
-	{R367CAB_TRL_LPF_ACQ_GAIN,	0x44},
-	{R367CAB_TRL_LPF_TRK_GAIN,	0x22},
-	{R367CAB_TRL_LPF_OUT_GAIN,	0x03},
-	{R367CAB_TRL_LOCKDET_LTH,	0x04},
-	{R367CAB_TRL_LOCKDET_HTH,	0x11},
-	{R367CAB_TRL_LOCKDET_TRGVAL,	0x20},
-	{R367CAB_IQ_QAM,	0x01},
-	{R367CAB_FSM_STATE,	0xa0},
-	{R367CAB_FSM_CTL,	0x08},
-	{R367CAB_FSM_STS,	0x0c},
-	{R367CAB_FSM_SNR0_HTH,	0x00},
-	{R367CAB_FSM_SNR1_HTH,	0x00},
-	{R367CAB_FSM_SNR2_HTH,	0x23},/* 0x00 */
-	{R367CAB_FSM_SNR0_LTH,	0x00},
-	{R367CAB_FSM_SNR1_LTH,	0x00},
-	{R367CAB_FSM_EQA1_HTH,	0x00},
-	{R367CAB_FSM_TEMPO,	0x32},
-	{R367CAB_FSM_CONFIG,	0x03},
-	{R367CAB_EQU_I_TESTTAP_L,	0x11},
-	{R367CAB_EQU_I_TESTTAP_M,	0x00},
-	{R367CAB_EQU_I_TESTTAP_H,	0x00},
-	{R367CAB_EQU_TESTAP_CFG,	0x00},
-	{R367CAB_EQU_Q_TESTTAP_L,	0xff},
-	{R367CAB_EQU_Q_TESTTAP_M,	0x00},
-	{R367CAB_EQU_Q_TESTTAP_H,	0x00},
-	{R367CAB_EQU_TAP_CTRL,	0x00},
-	{R367CAB_EQU_CTR_CRL_CONTROL_L,	0x11},
-	{R367CAB_EQU_CTR_CRL_CONTROL_H,	0x05},
-	{R367CAB_EQU_CTR_HIPOW_L,	0x00},
-	{R367CAB_EQU_CTR_HIPOW_H,	0x00},
-	{R367CAB_EQU_I_EQU_LO,	0xef},
-	{R367CAB_EQU_I_EQU_HI,	0x00},
-	{R367CAB_EQU_Q_EQU_LO,	0xee},
-	{R367CAB_EQU_Q_EQU_HI,	0x00},
-	{R367CAB_EQU_MAPPER,	0xc5},
-	{R367CAB_EQU_SWEEP_RATE,	0x80},
-	{R367CAB_EQU_SNR_LO,	0x64},
-	{R367CAB_EQU_SNR_HI,	0x03},
-	{R367CAB_EQU_GAMMA_LO,	0x00},
-	{R367CAB_EQU_GAMMA_HI,	0x00},
-	{R367CAB_EQU_ERR_GAIN,	0x36},
-	{R367CAB_EQU_RADIUS,	0xaa},
-	{R367CAB_EQU_FFE_MAINTAP,	0x00},
-	{R367CAB_EQU_FFE_LEAKAGE,	0x63},
-	{R367CAB_EQU_FFE_MAINTAP_POS,	0xdf},
-	{R367CAB_EQU_GAIN_WIDE,	0x88},
-	{R367CAB_EQU_GAIN_NARROW,	0x41},
-	{R367CAB_EQU_CTR_LPF_GAIN,	0xd1},
-	{R367CAB_EQU_CRL_LPF_GAIN,	0xa7},
-	{R367CAB_EQU_GLOBAL_GAIN,	0x06},
-	{R367CAB_EQU_CRL_LD_SEN,	0x85},
-	{R367CAB_EQU_CRL_LD_VAL,	0xe2},
-	{R367CAB_EQU_CRL_TFR,	0x20},
-	{R367CAB_EQU_CRL_BISTH_LO,	0x00},
-	{R367CAB_EQU_CRL_BISTH_HI,	0x00},
-	{R367CAB_EQU_SWEEP_RANGE_LO,	0x00},
-	{R367CAB_EQU_SWEEP_RANGE_HI,	0x00},
-	{R367CAB_EQU_CRL_LIMITER,	0x40},
-	{R367CAB_EQU_MODULUS_MAP,	0x90},
-	{R367CAB_EQU_PNT_GAIN,	0xa7},
-	{R367CAB_FEC_AC_CTR_0,	0x16},
-	{R367CAB_FEC_AC_CTR_1,	0x0b},
-	{R367CAB_FEC_AC_CTR_2,	0x88},
-	{R367CAB_FEC_AC_CTR_3,	0x02},
-	{R367CAB_FEC_STATUS,	0x12},
-	{R367CAB_RS_COUNTER_0,	0x7d},
-	{R367CAB_RS_COUNTER_1,	0xd0},
-	{R367CAB_RS_COUNTER_2,	0x19},
-	{R367CAB_RS_COUNTER_3,	0x0b},
-	{R367CAB_RS_COUNTER_4,	0xa3},
-	{R367CAB_RS_COUNTER_5,	0x00},
-	{R367CAB_BERT_0,	0x01},
-	{R367CAB_BERT_1,	0x25},
-	{R367CAB_BERT_2,	0x41},
-	{R367CAB_BERT_3,	0x39},
-	{R367CAB_OUTFORMAT_0,	0xc2},
-	{R367CAB_OUTFORMAT_1,	0x22},
-	{R367CAB_SMOOTHER_2,	0x28},
-	{R367CAB_TSMF_CTRL_0,	0x01},
-	{R367CAB_TSMF_CTRL_1,	0xc6},
-	{R367CAB_TSMF_CTRL_3,	0x43},
-	{R367CAB_TS_ON_ID_0,	0x00},
-	{R367CAB_TS_ON_ID_1,	0x00},
-	{R367CAB_TS_ON_ID_2,	0x00},
-	{R367CAB_TS_ON_ID_3,	0x00},
-	{R367CAB_RE_STATUS_0,	0x00},
-	{R367CAB_RE_STATUS_1,	0x00},
-	{R367CAB_RE_STATUS_2,	0x00},
-	{R367CAB_RE_STATUS_3,	0x00},
-	{R367CAB_TS_STATUS_0,	0x00},
-	{R367CAB_TS_STATUS_1,	0x00},
-	{R367CAB_TS_STATUS_2,	0xa0},
-	{R367CAB_TS_STATUS_3,	0x00},
-	{R367CAB_T_O_ID_0,	0x00},
-	{R367CAB_T_O_ID_1,	0x00},
-	{R367CAB_T_O_ID_2,	0x00},
-	{R367CAB_T_O_ID_3,	0x00},
-};
-
-static
-int stv0367_writeregs(struct stv0367_state *state, u16 reg, u8 *data, int len)
-{
-	u8 buf[len + 2];
-	struct i2c_msg msg = {
-		.addr = state->config->demod_address,
-		.flags = 0,
-		.buf = buf,
-		.len = len + 2
-	};
-	int ret;
-
-	buf[0] = MSB(reg);
-	buf[1] = LSB(reg);
-	memcpy(buf + 2, data, len);
-
-	if (i2cdebug)
-		printk(KERN_DEBUG "%s: %02x: %02x\n", __func__, reg, buf[2]);
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-	if (ret != 1)
-		printk(KERN_ERR "%s: i2c write error!\n", __func__);
-
-	return (ret != 1) ? -EREMOTEIO : 0;
-}
-
-static int stv0367_writereg(struct stv0367_state *state, u16 reg, u8 data)
-{
-	return stv0367_writeregs(state, reg, &data, 1);
-}
-
-static u8 stv0367_readreg(struct stv0367_state *state, u16 reg)
-{
-	u8 b0[] = { 0, 0 };
-	u8 b1[] = { 0 };
-	struct i2c_msg msg[] = {
-		{
-			.addr = state->config->demod_address,
-			.flags = 0,
-			.buf = b0,
-			.len = 2
-		}, {
-			.addr = state->config->demod_address,
-			.flags = I2C_M_RD,
-			.buf = b1,
-			.len = 1
-		}
-	};
-	int ret;
-
-	b0[0] = MSB(reg);
-	b0[1] = LSB(reg);
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-	if (ret != 2)
-		printk(KERN_ERR "%s: i2c read error\n", __func__);
-
-	if (i2cdebug)
-		printk(KERN_DEBUG "%s: %02x: %02x\n", __func__, reg, b1[0]);
-
-	return b1[0];
-}
-
-static void extract_mask_pos(u32 label, u8 *mask, u8 *pos)
-{
-	u8 position = 0, i = 0;
-
-	(*mask) = label & 0xff;
-
-	while ((position == 0) && (i < 8)) {
-		position = ((*mask) >> i) & 0x01;
-		i++;
-	}
-
-	(*pos) = (i - 1);
-}
-
-static void stv0367_writebits(struct stv0367_state *state, u32 label, u8 val)
-{
-	u8 reg, mask, pos;
-
-	reg = stv0367_readreg(state, (label >> 16) & 0xffff);
-	extract_mask_pos(label, &mask, &pos);
-
-	val = mask & (val << pos);
-
-	reg = (reg & (~mask)) | val;
-	stv0367_writereg(state, (label >> 16) & 0xffff, reg);
-
-}
-
-static void stv0367_setbits(u8 *reg, u32 label, u8 val)
-{
-	u8 mask, pos;
-
-	extract_mask_pos(label, &mask, &pos);
-
-	val = mask & (val << pos);
-
-	(*reg) = ((*reg) & (~mask)) | val;
-}
-
-static u8 stv0367_readbits(struct stv0367_state *state, u32 label)
-{
-	u8 val = 0xff;
-	u8 mask, pos;
-
-	extract_mask_pos(label, &mask, &pos);
-
-	val = stv0367_readreg(state, label >> 16);
-	val = (val & mask) >> pos;
-
-	return val;
-}
-
-u8 stv0367_getbits(u8 reg, u32 label)
-{
-	u8 mask, pos;
-
-	extract_mask_pos(label, &mask, &pos);
-
-	return (reg & mask) >> pos;
-}
-
-static int stv0367ter_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct stv0367_state *state = fe->demodulator_priv;
-	u8 tmp = stv0367_readreg(state, R367TER_I2CRPT);
-
-	dprintk("%s:\n", __func__);
-
-	if (enable) {
-		stv0367_setbits(&tmp, F367TER_STOP_ENABLE, 0);
-		stv0367_setbits(&tmp, F367TER_I2CT_ON, 1);
-	} else {
-		stv0367_setbits(&tmp, F367TER_STOP_ENABLE, 1);
-		stv0367_setbits(&tmp, F367TER_I2CT_ON, 0);
-	}
-
-	stv0367_writereg(state, R367TER_I2CRPT, tmp);
-
-	return 0;
-}
-
-static u32 stv0367_get_tuner_freq(struct dvb_frontend *fe)
-{
-	struct dvb_frontend_ops	*frontend_ops = NULL;
-	struct dvb_tuner_ops	*tuner_ops = NULL;
-	u32 freq = 0;
-	int err = 0;
-
-	dprintk("%s:\n", __func__);
-
-
-	if (&fe->ops)
-		frontend_ops = &fe->ops;
-	if (&frontend_ops->tuner_ops)
-		tuner_ops = &frontend_ops->tuner_ops;
-	if (tuner_ops->get_frequency) {
-		err = tuner_ops->get_frequency(fe, &freq);
-		if (err < 0) {
-			printk(KERN_ERR "%s: Invalid parameter\n", __func__);
-			return err;
-		}
-
-		dprintk("%s: frequency=%d\n", __func__, freq);
-
-	} else
-		return -1;
-
-	return freq;
-}
-
-static u16 CellsCoeffs_8MHz_367cofdm[3][6][5] = {
-	{
-		{0x10EF, 0xE205, 0x10EF, 0xCE49, 0x6DA7}, /* CELL 1 COEFFS 27M*/
-		{0x2151, 0xc557, 0x2151, 0xc705, 0x6f93}, /* CELL 2 COEFFS */
-		{0x2503, 0xc000, 0x2503, 0xc375, 0x7194}, /* CELL 3 COEFFS */
-		{0x20E9, 0xca94, 0x20e9, 0xc153, 0x7194}, /* CELL 4 COEFFS */
-		{0x06EF, 0xF852, 0x06EF, 0xC057, 0x7207}, /* CELL 5 COEFFS */
-		{0x0000, 0x0ECC, 0x0ECC, 0x0000, 0x3647} /* CELL 6 COEFFS */
-	}, {
-		{0x10A0, 0xE2AF, 0x10A1, 0xCE76, 0x6D6D}, /* CELL 1 COEFFS 25M*/
-		{0x20DC, 0xC676, 0x20D9, 0xC80A, 0x6F29},
-		{0x2532, 0xC000, 0x251D, 0xC391, 0x706F},
-		{0x1F7A, 0xCD2B, 0x2032, 0xC15E, 0x711F},
-		{0x0698, 0xFA5E, 0x0568, 0xC059, 0x7193},
-		{0x0000, 0x0918, 0x149C, 0x0000, 0x3642} /* CELL 6 COEFFS */
-	}, {
-		{0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, /* 30M */
-		{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
-		{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
-		{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
-		{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
-		{0x0000, 0x0000, 0x0000, 0x0000, 0x0000}
-	}
-};
-
-static u16 CellsCoeffs_7MHz_367cofdm[3][6][5] = {
-	{
-		{0x12CA, 0xDDAF, 0x12CA, 0xCCEB, 0x6FB1}, /* CELL 1 COEFFS 27M*/
-		{0x2329, 0xC000, 0x2329, 0xC6B0, 0x725F}, /* CELL 2 COEFFS */
-		{0x2394, 0xC000, 0x2394, 0xC2C7, 0x7410}, /* CELL 3 COEFFS */
-		{0x251C, 0xC000, 0x251C, 0xC103, 0x74D9}, /* CELL 4 COEFFS */
-		{0x0804, 0xF546, 0x0804, 0xC040, 0x7544}, /* CELL 5 COEFFS */
-		{0x0000, 0x0CD9, 0x0CD9, 0x0000, 0x370A} /* CELL 6 COEFFS */
-	}, {
-		{0x1285, 0xDE47, 0x1285, 0xCD17, 0x6F76}, /*25M*/
-		{0x234C, 0xC000, 0x2348, 0xC6DA, 0x7206},
-		{0x23B4, 0xC000, 0x23AC, 0xC2DB, 0x73B3},
-		{0x253D, 0xC000, 0x25B6, 0xC10B, 0x747F},
-		{0x0721, 0xF79C, 0x065F, 0xC041, 0x74EB},
-		{0x0000, 0x08FA, 0x1162, 0x0000, 0x36FF}
-	}, {
-		{0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, /* 30M */
-		{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
-		{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
-		{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
-		{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
-		{0x0000, 0x0000, 0x0000, 0x0000, 0x0000}
-	}
-};
-
-static u16 CellsCoeffs_6MHz_367cofdm[3][6][5] = {
-	{
-		{0x1699, 0xD5B8, 0x1699, 0xCBC3, 0x713B}, /* CELL 1 COEFFS 27M*/
-		{0x2245, 0xC000, 0x2245, 0xC568, 0x74D5}, /* CELL 2 COEFFS */
-		{0x227F, 0xC000, 0x227F, 0xC1FC, 0x76C6}, /* CELL 3 COEFFS */
-		{0x235E, 0xC000, 0x235E, 0xC0A7, 0x778A}, /* CELL 4 COEFFS */
-		{0x0ECB, 0xEA0B, 0x0ECB, 0xC027, 0x77DD}, /* CELL 5 COEFFS */
-		{0x0000, 0x0B68, 0x0B68, 0x0000, 0xC89A}, /* CELL 6 COEFFS */
-	}, {
-		{0x1655, 0xD64E, 0x1658, 0xCBEF, 0x70FE}, /*25M*/
-		{0x225E, 0xC000, 0x2256, 0xC589, 0x7489},
-		{0x2293, 0xC000, 0x2295, 0xC209, 0x767E},
-		{0x2377, 0xC000, 0x23AA, 0xC0AB, 0x7746},
-		{0x0DC7, 0xEBC8, 0x0D07, 0xC027, 0x7799},
-		{0x0000, 0x0888, 0x0E9C, 0x0000, 0x3757}
-
-	}, {
-		{0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, /* 30M */
-		{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
-		{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
-		{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
-		{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
-		{0x0000, 0x0000, 0x0000, 0x0000, 0x0000}
-	}
-};
-
-static u32 stv0367ter_get_mclk(struct stv0367_state *state, u32 ExtClk_Hz)
-{
-	u32 mclk_Hz = 0; /* master clock frequency (Hz) */
-	u32 m, n, p;
-
-	dprintk("%s:\n", __func__);
-
-	if (stv0367_readbits(state, F367TER_BYPASS_PLLXN) == 0) {
-		n = (u32)stv0367_readbits(state, F367TER_PLL_NDIV);
-		if (n == 0)
-			n = n + 1;
-
-		m = (u32)stv0367_readbits(state, F367TER_PLL_MDIV);
-		if (m == 0)
-			m = m + 1;
-
-		p = (u32)stv0367_readbits(state, F367TER_PLL_PDIV);
-		if (p > 5)
-			p = 5;
-
-		mclk_Hz = ((ExtClk_Hz / 2) * n) / (m * (1 << p));
-
-		dprintk("N=%d M=%d P=%d mclk_Hz=%d ExtClk_Hz=%d\n",
-				n, m, p, mclk_Hz, ExtClk_Hz);
-	} else
-		mclk_Hz = ExtClk_Hz;
-
-	dprintk("%s: mclk_Hz=%d\n", __func__, mclk_Hz);
-
-	return mclk_Hz;
-}
-
-static int stv0367ter_filt_coeff_init(struct stv0367_state *state,
-				u16 CellsCoeffs[3][6][5], u32 DemodXtal)
-{
-	int i, j, k, freq;
-
-	dprintk("%s:\n", __func__);
-
-	freq = stv0367ter_get_mclk(state, DemodXtal);
-
-	if (freq == 53125000)
-		k = 1; /* equivalent to Xtal 25M on 362*/
-	else if (freq == 54000000)
-		k = 0; /* equivalent to Xtal 27M on 362*/
-	else if (freq == 52500000)
-		k = 2; /* equivalent to Xtal 30M on 362*/
-	else
-		return 0;
-
-	for (i = 1; i <= 6; i++) {
-		stv0367_writebits(state, F367TER_IIR_CELL_NB, i - 1);
-
-		for (j = 1; j <= 5; j++) {
-			stv0367_writereg(state,
-				(R367TER_IIRCX_COEFF1_MSB + 2 * (j - 1)),
-				MSB(CellsCoeffs[k][i-1][j-1]));
-			stv0367_writereg(state,
-				(R367TER_IIRCX_COEFF1_LSB + 2 * (j - 1)),
-				LSB(CellsCoeffs[k][i-1][j-1]));
-		}
-	}
-
-	return 1;
-
-}
-
-static void stv0367ter_agc_iir_lock_detect_set(struct stv0367_state *state)
-{
-	dprintk("%s:\n", __func__);
-
-	stv0367_writebits(state, F367TER_LOCK_DETECT_LSB, 0x00);
-
-	/* Lock detect 1 */
-	stv0367_writebits(state, F367TER_LOCK_DETECT_CHOICE, 0x00);
-	stv0367_writebits(state, F367TER_LOCK_DETECT_MSB, 0x06);
-	stv0367_writebits(state, F367TER_AUT_AGC_TARGET_LSB, 0x04);
-
-	/* Lock detect 2 */
-	stv0367_writebits(state, F367TER_LOCK_DETECT_CHOICE, 0x01);
-	stv0367_writebits(state, F367TER_LOCK_DETECT_MSB, 0x06);
-	stv0367_writebits(state, F367TER_AUT_AGC_TARGET_LSB, 0x04);
-
-	/* Lock detect 3 */
-	stv0367_writebits(state, F367TER_LOCK_DETECT_CHOICE, 0x02);
-	stv0367_writebits(state, F367TER_LOCK_DETECT_MSB, 0x01);
-	stv0367_writebits(state, F367TER_AUT_AGC_TARGET_LSB, 0x00);
-
-	/* Lock detect 4 */
-	stv0367_writebits(state, F367TER_LOCK_DETECT_CHOICE, 0x03);
-	stv0367_writebits(state, F367TER_LOCK_DETECT_MSB, 0x01);
-	stv0367_writebits(state, F367TER_AUT_AGC_TARGET_LSB, 0x00);
-
-}
-
-static int stv0367_iir_filt_init(struct stv0367_state *state, u8 Bandwidth,
-							u32 DemodXtalValue)
-{
-	dprintk("%s:\n", __func__);
-
-	stv0367_writebits(state, F367TER_NRST_IIR, 0);
-
-	switch (Bandwidth) {
-	case 6:
-		if (!stv0367ter_filt_coeff_init(state,
-				CellsCoeffs_6MHz_367cofdm,
-				DemodXtalValue))
-			return 0;
-		break;
-	case 7:
-		if (!stv0367ter_filt_coeff_init(state,
-				CellsCoeffs_7MHz_367cofdm,
-				DemodXtalValue))
-			return 0;
-		break;
-	case 8:
-		if (!stv0367ter_filt_coeff_init(state,
-				CellsCoeffs_8MHz_367cofdm,
-				DemodXtalValue))
-			return 0;
-		break;
-	default:
-		return 0;
-	}
-
-	stv0367_writebits(state, F367TER_NRST_IIR, 1);
-
-	return 1;
-}
-
-static void stv0367ter_agc_iir_rst(struct stv0367_state *state)
-{
-
-	u8 com_n;
-
-	dprintk("%s:\n", __func__);
-
-	com_n = stv0367_readbits(state, F367TER_COM_N);
-
-	stv0367_writebits(state, F367TER_COM_N, 0x07);
-
-	stv0367_writebits(state, F367TER_COM_SOFT_RSTN, 0x00);
-	stv0367_writebits(state, F367TER_COM_AGC_ON, 0x00);
-
-	stv0367_writebits(state, F367TER_COM_SOFT_RSTN, 0x01);
-	stv0367_writebits(state, F367TER_COM_AGC_ON, 0x01);
-
-	stv0367_writebits(state, F367TER_COM_N, com_n);
-
-}
-
-static int stv0367ter_duration(s32 mode, int tempo1, int tempo2, int tempo3)
-{
-	int local_tempo = 0;
-	switch (mode) {
-	case 0:
-		local_tempo = tempo1;
-		break;
-	case 1:
-		local_tempo = tempo2;
-		break ;
-
-	case 2:
-		local_tempo = tempo3;
-		break;
-
-	default:
-		break;
-	}
-	/*	msleep(local_tempo);  */
-	return local_tempo;
-}
-
-static enum
-stv0367_ter_signal_type stv0367ter_check_syr(struct stv0367_state *state)
-{
-	int wd = 100;
-	unsigned short int SYR_var;
-	s32 SYRStatus;
-
-	dprintk("%s:\n", __func__);
-
-	SYR_var = stv0367_readbits(state, F367TER_SYR_LOCK);
-
-	while ((!SYR_var) && (wd > 0)) {
-		usleep_range(2000, 3000);
-		wd -= 2;
-		SYR_var = stv0367_readbits(state, F367TER_SYR_LOCK);
-	}
-
-	if (!SYR_var)
-		SYRStatus = FE_TER_NOSYMBOL;
-	else
-		SYRStatus =  FE_TER_SYMBOLOK;
-
-	dprintk("stv0367ter_check_syr SYRStatus %s\n",
-				SYR_var == 0 ? "No Symbol" : "OK");
-
-	return SYRStatus;
-}
-
-static enum
-stv0367_ter_signal_type stv0367ter_check_cpamp(struct stv0367_state *state,
-								s32 FFTmode)
-{
-
-	s32  CPAMPvalue = 0, CPAMPStatus, CPAMPMin;
-	int wd = 0;
-
-	dprintk("%s:\n", __func__);
-
-	switch (FFTmode) {
-	case 0: /*2k mode*/
-		CPAMPMin = 20;
-		wd = 10;
-		break;
-	case 1: /*8k mode*/
-		CPAMPMin = 80;
-		wd = 55;
-		break;
-	case 2: /*4k mode*/
-		CPAMPMin = 40;
-		wd = 30;
-		break;
-	default:
-		CPAMPMin = 0xffff;  /*drives to NOCPAMP	*/
-		break;
-	}
-
-	dprintk("%s: CPAMPMin=%d wd=%d\n", __func__, CPAMPMin, wd);
-
-	CPAMPvalue = stv0367_readbits(state, F367TER_PPM_CPAMP_DIRECT);
-	while ((CPAMPvalue < CPAMPMin) && (wd > 0)) {
-		usleep_range(1000, 2000);
-		wd -= 1;
-		CPAMPvalue = stv0367_readbits(state, F367TER_PPM_CPAMP_DIRECT);
-		/*dprintk("CPAMPvalue= %d at wd=%d\n",CPAMPvalue,wd); */
-	}
-	dprintk("******last CPAMPvalue= %d at wd=%d\n", CPAMPvalue, wd);
-	if (CPAMPvalue < CPAMPMin) {
-		CPAMPStatus = FE_TER_NOCPAMP;
-		printk(KERN_ERR "CPAMP failed\n");
-	} else {
-		printk(KERN_ERR "CPAMP OK !\n");
-		CPAMPStatus = FE_TER_CPAMPOK;
-	}
-
-	return CPAMPStatus;
-}
-
-enum
-stv0367_ter_signal_type stv0367ter_lock_algo(struct stv0367_state *state)
-{
-	enum stv0367_ter_signal_type ret_flag;
-	short int wd, tempo;
-	u8 try, u_var1 = 0, u_var2 = 0, u_var3 = 0, u_var4 = 0, mode, guard;
-	u8 tmp, tmp2;
-
-	dprintk("%s:\n", __func__);
-
-	if (state == NULL)
-		return FE_TER_SWNOK;
-
-	try = 0;
-	do {
-		ret_flag = FE_TER_LOCKOK;
-
-		stv0367_writebits(state, F367TER_CORE_ACTIVE, 0);
-
-		if (state->config->if_iq_mode != 0)
-			stv0367_writebits(state, F367TER_COM_N, 0x07);
-
-		stv0367_writebits(state, F367TER_GUARD, 3);/* suggest 2k 1/4 */
-		stv0367_writebits(state, F367TER_MODE, 0);
-		stv0367_writebits(state, F367TER_SYR_TR_DIS, 0);
-		usleep_range(5000, 10000);
-
-		stv0367_writebits(state, F367TER_CORE_ACTIVE, 1);
-
-
-		if (stv0367ter_check_syr(state) == FE_TER_NOSYMBOL)
-			return FE_TER_NOSYMBOL;
-		else { /*
-			if chip locked on wrong mode first try,
-			it must lock correctly second try */
-			mode = stv0367_readbits(state, F367TER_SYR_MODE);
-			if (stv0367ter_check_cpamp(state, mode) ==
-							FE_TER_NOCPAMP) {
-				if (try == 0)
-					ret_flag = FE_TER_NOCPAMP;
-
-			}
-		}
-
-		try++;
-	} while ((try < 10) && (ret_flag != FE_TER_LOCKOK));
-
-	tmp  = stv0367_readreg(state, R367TER_SYR_STAT);
-	tmp2 = stv0367_readreg(state, R367TER_STATUS);
-	dprintk("state=%p\n", state);
-	dprintk("LOCK OK! mode=%d SYR_STAT=0x%x R367TER_STATUS=0x%x\n",
-							mode, tmp, tmp2);
-
-	tmp  = stv0367_readreg(state, R367TER_PRVIT);
-	tmp2 = stv0367_readreg(state, R367TER_I2CRPT);
-	dprintk("PRVIT=0x%x I2CRPT=0x%x\n", tmp, tmp2);
-
-	tmp  = stv0367_readreg(state, R367TER_GAIN_SRC1);
-	dprintk("GAIN_SRC1=0x%x\n", tmp);
-
-	if ((mode != 0) && (mode != 1) && (mode != 2))
-		return FE_TER_SWNOK;
-
-	/*guard=stv0367_readbits(state,F367TER_SYR_GUARD); */
-
-	/*suppress EPQ auto for SYR_GARD 1/16 or 1/32
-	and set channel predictor in automatic */
-#if 0
-	switch (guard) {
-
-	case 0:
-	case 1:
-		stv0367_writebits(state, F367TER_AUTO_LE_EN, 0);
-		stv0367_writereg(state, R367TER_CHC_CTL, 0x01);
-		break;
-	case 2:
-	case 3:
-		stv0367_writebits(state, F367TER_AUTO_LE_EN, 1);
-		stv0367_writereg(state, R367TER_CHC_CTL, 0x11);
-		break;
-
-	default:
-		return FE_TER_SWNOK;
-	}
-#endif
-
-	/*reset fec an reedsolo FOR 367 only*/
-	stv0367_writebits(state, F367TER_RST_SFEC, 1);
-	stv0367_writebits(state, F367TER_RST_REEDSOLO, 1);
-	usleep_range(1000, 2000);
-	stv0367_writebits(state, F367TER_RST_SFEC, 0);
-	stv0367_writebits(state, F367TER_RST_REEDSOLO, 0);
-
-	u_var1 = stv0367_readbits(state, F367TER_LK);
-	u_var2 = stv0367_readbits(state, F367TER_PRF);
-	u_var3 = stv0367_readbits(state, F367TER_TPS_LOCK);
-	/*	u_var4=stv0367_readbits(state,F367TER_TSFIFO_LINEOK); */
-
-	wd = stv0367ter_duration(mode, 125, 500, 250);
-	tempo = stv0367ter_duration(mode, 4, 16, 8);
-
-	/*while ( ((!u_var1)||(!u_var2)||(!u_var3)||(!u_var4))  && (wd>=0)) */
-	while (((!u_var1) || (!u_var2) || (!u_var3)) && (wd >= 0)) {
-		usleep_range(1000 * tempo, 1000 * (tempo + 1));
-		wd -= tempo;
-		u_var1 = stv0367_readbits(state, F367TER_LK);
-		u_var2 = stv0367_readbits(state, F367TER_PRF);
-		u_var3 = stv0367_readbits(state, F367TER_TPS_LOCK);
-		/*u_var4=stv0367_readbits(state, F367TER_TSFIFO_LINEOK); */
-	}
-
-	if (!u_var1)
-		return FE_TER_NOLOCK;
-
-
-	if (!u_var2)
-		return FE_TER_NOPRFOUND;
-
-	if (!u_var3)
-		return FE_TER_NOTPS;
-
-	guard = stv0367_readbits(state, F367TER_SYR_GUARD);
-	stv0367_writereg(state, R367TER_CHC_CTL, 0x11);
-	switch (guard) {
-	case 0:
-	case 1:
-		stv0367_writebits(state, F367TER_AUTO_LE_EN, 0);
-		/*stv0367_writereg(state,R367TER_CHC_CTL, 0x1);*/
-		stv0367_writebits(state, F367TER_SYR_FILTER, 0);
-		break;
-	case 2:
-	case 3:
-		stv0367_writebits(state, F367TER_AUTO_LE_EN, 1);
-		/*stv0367_writereg(state,R367TER_CHC_CTL, 0x11);*/
-		stv0367_writebits(state, F367TER_SYR_FILTER, 1);
-		break;
-
-	default:
-		return FE_TER_SWNOK;
-	}
-
-	/* apply Sfec workaround if 8K 64QAM CR!=1/2*/
-	if ((stv0367_readbits(state, F367TER_TPS_CONST) == 2) &&
-			(mode == 1) &&
-			(stv0367_readbits(state, F367TER_TPS_HPCODE) != 0)) {
-		stv0367_writereg(state, R367TER_SFDLYSETH, 0xc0);
-		stv0367_writereg(state, R367TER_SFDLYSETM, 0x60);
-		stv0367_writereg(state, R367TER_SFDLYSETL, 0x0);
-	} else
-		stv0367_writereg(state, R367TER_SFDLYSETH, 0x0);
-
-	wd = stv0367ter_duration(mode, 125, 500, 250);
-	u_var4 = stv0367_readbits(state, F367TER_TSFIFO_LINEOK);
-
-	while ((!u_var4) && (wd >= 0)) {
-		usleep_range(1000 * tempo, 1000 * (tempo + 1));
-		wd -= tempo;
-		u_var4 = stv0367_readbits(state, F367TER_TSFIFO_LINEOK);
-	}
-
-	if (!u_var4)
-		return FE_TER_NOLOCK;
-
-	/* for 367 leave COM_N at 0x7 for IQ_mode*/
-	/*if(ter_state->if_iq_mode!=FE_TER_NORMAL_IF_TUNER) {
-		tempo=0;
-		while ((stv0367_readbits(state,F367TER_COM_USEGAINTRK)!=1) &&
-		(stv0367_readbits(state,F367TER_COM_AGCLOCK)!=1)&&(tempo<100)) {
-			ChipWaitOrAbort(state,1);
-			tempo+=1;
-		}
-
-		stv0367_writebits(state,F367TER_COM_N,0x17);
-	} */
-
-	stv0367_writebits(state, F367TER_SYR_TR_DIS, 1);
-
-	dprintk("FE_TER_LOCKOK !!!\n");
-
-	return	FE_TER_LOCKOK;
-
-}
-
-static void stv0367ter_set_ts_mode(struct stv0367_state *state,
-					enum stv0367_ts_mode PathTS)
-{
-
-	dprintk("%s:\n", __func__);
-
-	if (state == NULL)
-		return;
-
-	stv0367_writebits(state, F367TER_TS_DIS, 0);
-	switch (PathTS) {
-	default:
-		/*for removing warning :default we can assume in parallel mode*/
-	case STV0367_PARALLEL_PUNCT_CLOCK:
-		stv0367_writebits(state, F367TER_TSFIFO_SERIAL, 0);
-		stv0367_writebits(state, F367TER_TSFIFO_DVBCI, 0);
-		break;
-	case STV0367_SERIAL_PUNCT_CLOCK:
-		stv0367_writebits(state, F367TER_TSFIFO_SERIAL, 1);
-		stv0367_writebits(state, F367TER_TSFIFO_DVBCI, 1);
-		break;
-	}
-}
-
-static void stv0367ter_set_clk_pol(struct stv0367_state *state,
-					enum stv0367_clk_pol clock)
-{
-
-	dprintk("%s:\n", __func__);
-
-	if (state == NULL)
-		return;
-
-	switch (clock) {
-	case STV0367_RISINGEDGE_CLOCK:
-		stv0367_writebits(state, F367TER_TS_BYTE_CLK_INV, 1);
-		break;
-	case STV0367_FALLINGEDGE_CLOCK:
-		stv0367_writebits(state, F367TER_TS_BYTE_CLK_INV, 0);
-		break;
-		/*case FE_TER_CLOCK_POLARITY_DEFAULT:*/
-	default:
-		stv0367_writebits(state, F367TER_TS_BYTE_CLK_INV, 0);
-		break;
-	}
-}
-
-#if 0
-static void stv0367ter_core_sw(struct stv0367_state *state)
-{
-
-	dprintk("%s:\n", __func__);
-
-	stv0367_writebits(state, F367TER_CORE_ACTIVE, 0);
-	stv0367_writebits(state, F367TER_CORE_ACTIVE, 1);
-	msleep(350);
-}
-#endif
-static int stv0367ter_standby(struct dvb_frontend *fe, u8 standby_on)
-{
-	struct stv0367_state *state = fe->demodulator_priv;
-
-	dprintk("%s:\n", __func__);
-
-	if (standby_on) {
-		stv0367_writebits(state, F367TER_STDBY, 1);
-		stv0367_writebits(state, F367TER_STDBY_FEC, 1);
-		stv0367_writebits(state, F367TER_STDBY_CORE, 1);
-	} else {
-		stv0367_writebits(state, F367TER_STDBY, 0);
-		stv0367_writebits(state, F367TER_STDBY_FEC, 0);
-		stv0367_writebits(state, F367TER_STDBY_CORE, 0);
-	}
-
-	return 0;
-}
-
-static int stv0367ter_sleep(struct dvb_frontend *fe)
-{
-	return stv0367ter_standby(fe, 1);
-}
-
-int stv0367ter_init(struct dvb_frontend *fe)
-{
-	struct stv0367_state *state = fe->demodulator_priv;
-	struct stv0367ter_state *ter_state = state->ter_state;
-	int i;
-
-	dprintk("%s:\n", __func__);
-
-	ter_state->pBER = 0;
-
-	for (i = 0; i < STV0367TER_NBREGS; i++)
-		stv0367_writereg(state, def0367ter[i].addr,
-					def0367ter[i].value);
-
-	switch (state->config->xtal) {
-		/*set internal freq to 53.125MHz */
-	case 25000000:
-		stv0367_writereg(state, R367TER_PLLMDIV, 0xa);
-		stv0367_writereg(state, R367TER_PLLNDIV, 0x55);
-		stv0367_writereg(state, R367TER_PLLSETUP, 0x18);
-		break;
-	default:
-	case 27000000:
-		dprintk("FE_STV0367TER_SetCLKgen for 27Mhz\n");
-		stv0367_writereg(state, R367TER_PLLMDIV, 0x1);
-		stv0367_writereg(state, R367TER_PLLNDIV, 0x8);
-		stv0367_writereg(state, R367TER_PLLSETUP, 0x18);
-		break;
-	case 30000000:
-		stv0367_writereg(state, R367TER_PLLMDIV, 0xc);
-		stv0367_writereg(state, R367TER_PLLNDIV, 0x55);
-		stv0367_writereg(state, R367TER_PLLSETUP, 0x18);
-		break;
-	}
-
-	stv0367_writereg(state, R367TER_I2CRPT, 0xa0);
-	stv0367_writereg(state, R367TER_ANACTRL, 0x00);
-
-	/*Set TS1 and TS2 to serial or parallel mode */
-	stv0367ter_set_ts_mode(state, state->config->ts_mode);
-	stv0367ter_set_clk_pol(state, state->config->clk_pol);
-
-	state->chip_id = stv0367_readreg(state, R367TER_ID);
-	ter_state->first_lock = 0;
-	ter_state->unlock_counter = 2;
-
-	return 0;
-}
-
-static int stv0367ter_algo(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct stv0367_state *state = fe->demodulator_priv;
-	struct stv0367ter_state *ter_state = state->ter_state;
-	int offset = 0, tempo = 0;
-	u8 u_var;
-	u8 /*constell,*/ counter;
-	s8 step;
-	s32 timing_offset = 0;
-	u32 trl_nomrate = 0, InternalFreq = 0, temp = 0;
-
-	dprintk("%s:\n", __func__);
-
-	ter_state->frequency = p->frequency;
-	ter_state->force = FE_TER_FORCENONE
-			+ stv0367_readbits(state, F367TER_FORCE) * 2;
-	ter_state->if_iq_mode = state->config->if_iq_mode;
-	switch (state->config->if_iq_mode) {
-	case FE_TER_NORMAL_IF_TUNER:  /* Normal IF mode */
-		dprintk("ALGO: FE_TER_NORMAL_IF_TUNER selected\n");
-		stv0367_writebits(state, F367TER_TUNER_BB, 0);
-		stv0367_writebits(state, F367TER_LONGPATH_IF, 0);
-		stv0367_writebits(state, F367TER_DEMUX_SWAP, 0);
-		break;
-	case FE_TER_LONGPATH_IF_TUNER:  /* Long IF mode */
-		dprintk("ALGO: FE_TER_LONGPATH_IF_TUNER selected\n");
-		stv0367_writebits(state, F367TER_TUNER_BB, 0);
-		stv0367_writebits(state, F367TER_LONGPATH_IF, 1);
-		stv0367_writebits(state, F367TER_DEMUX_SWAP, 1);
-		break;
-	case FE_TER_IQ_TUNER:  /* IQ mode */
-		dprintk("ALGO: FE_TER_IQ_TUNER selected\n");
-		stv0367_writebits(state, F367TER_TUNER_BB, 1);
-		stv0367_writebits(state, F367TER_PPM_INVSEL, 0);
-		break;
-	default:
-		printk(KERN_ERR "ALGO: wrong TUNER type selected\n");
-		return -EINVAL;
-	}
-
-	usleep_range(5000, 7000);
-
-	switch (p->inversion) {
-	case INVERSION_AUTO:
-	default:
-		dprintk("%s: inversion AUTO\n", __func__);
-		if (ter_state->if_iq_mode == FE_TER_IQ_TUNER)
-			stv0367_writebits(state, F367TER_IQ_INVERT,
-						ter_state->sense);
-		else
-			stv0367_writebits(state, F367TER_INV_SPECTR,
-						ter_state->sense);
-
-		break;
-	case INVERSION_ON:
-	case INVERSION_OFF:
-		if (ter_state->if_iq_mode == FE_TER_IQ_TUNER)
-			stv0367_writebits(state, F367TER_IQ_INVERT,
-						p->inversion);
-		else
-			stv0367_writebits(state, F367TER_INV_SPECTR,
-						p->inversion);
-
-		break;
-	}
-
-	if ((ter_state->if_iq_mode != FE_TER_NORMAL_IF_TUNER) &&
-				(ter_state->pBW != ter_state->bw)) {
-		stv0367ter_agc_iir_lock_detect_set(state);
-
-		/*set fine agc target to 180 for LPIF or IQ mode*/
-		/* set Q_AGCTarget */
-		stv0367_writebits(state, F367TER_SEL_IQNTAR, 1);
-		stv0367_writebits(state, F367TER_AUT_AGC_TARGET_MSB, 0xB);
-		/*stv0367_writebits(state,AUT_AGC_TARGET_LSB,0x04); */
-
-		/* set Q_AGCTarget */
-		stv0367_writebits(state, F367TER_SEL_IQNTAR, 0);
-		stv0367_writebits(state, F367TER_AUT_AGC_TARGET_MSB, 0xB);
-		/*stv0367_writebits(state,AUT_AGC_TARGET_LSB,0x04); */
-
-		if (!stv0367_iir_filt_init(state, ter_state->bw,
-						state->config->xtal))
-			return -EINVAL;
-		/*set IIR filter once for 6,7 or 8MHz BW*/
-		ter_state->pBW = ter_state->bw;
-
-		stv0367ter_agc_iir_rst(state);
-	}
-
-	if (ter_state->hierarchy == FE_TER_HIER_LOW_PRIO)
-		stv0367_writebits(state, F367TER_BDI_LPSEL, 0x01);
-	else
-		stv0367_writebits(state, F367TER_BDI_LPSEL, 0x00);
-
-	InternalFreq = stv0367ter_get_mclk(state, state->config->xtal) / 1000;
-	temp = (int)
-		((((ter_state->bw * 64 * (1 << 15) * 100)
-						/ (InternalFreq)) * 10) / 7);
-
-	stv0367_writebits(state, F367TER_TRL_NOMRATE_LSB, temp % 2);
-	temp = temp / 2;
-	stv0367_writebits(state, F367TER_TRL_NOMRATE_HI, temp / 256);
-	stv0367_writebits(state, F367TER_TRL_NOMRATE_LO, temp % 256);
-
-	temp = stv0367_readbits(state, F367TER_TRL_NOMRATE_HI) * 512 +
-			stv0367_readbits(state, F367TER_TRL_NOMRATE_LO) * 2 +
-			stv0367_readbits(state, F367TER_TRL_NOMRATE_LSB);
-	temp = (int)(((1 << 17) * ter_state->bw * 1000) / (7 * (InternalFreq)));
-	stv0367_writebits(state, F367TER_GAIN_SRC_HI, temp / 256);
-	stv0367_writebits(state, F367TER_GAIN_SRC_LO, temp % 256);
-	temp = stv0367_readbits(state, F367TER_GAIN_SRC_HI) * 256 +
-			stv0367_readbits(state, F367TER_GAIN_SRC_LO);
-
-	temp = (int)
-		((InternalFreq - state->config->if_khz) * (1 << 16)
-							/ (InternalFreq));
-
-	dprintk("DEROT temp=0x%x\n", temp);
-	stv0367_writebits(state, F367TER_INC_DEROT_HI, temp / 256);
-	stv0367_writebits(state, F367TER_INC_DEROT_LO, temp % 256);
-
-	ter_state->echo_pos = 0;
-	ter_state->ucblocks = 0; /* liplianin */
-	ter_state->pBER = 0; /* liplianin */
-	stv0367_writebits(state, F367TER_LONG_ECHO, ter_state->echo_pos);
-
-	if (stv0367ter_lock_algo(state) != FE_TER_LOCKOK)
-		return 0;
-
-	ter_state->state = FE_TER_LOCKOK;
-
-	ter_state->mode = stv0367_readbits(state, F367TER_SYR_MODE);
-	ter_state->guard = stv0367_readbits(state, F367TER_SYR_GUARD);
-
-	ter_state->first_lock = 1; /* we know sense now :) */
-
-	ter_state->agc_val =
-			(stv0367_readbits(state, F367TER_AGC1_VAL_LO) << 16) +
-			(stv0367_readbits(state, F367TER_AGC1_VAL_HI) << 24) +
-			stv0367_readbits(state, F367TER_AGC2_VAL_LO) +
-			(stv0367_readbits(state, F367TER_AGC2_VAL_HI) << 8);
-
-	/* Carrier offset calculation */
-	stv0367_writebits(state, F367TER_FREEZE, 1);
-	offset = (stv0367_readbits(state, F367TER_CRL_FOFFSET_VHI) << 16) ;
-	offset += (stv0367_readbits(state, F367TER_CRL_FOFFSET_HI) << 8);
-	offset += (stv0367_readbits(state, F367TER_CRL_FOFFSET_LO));
-	stv0367_writebits(state, F367TER_FREEZE, 0);
-	if (offset > 8388607)
-		offset -= 16777216;
-
-	offset = offset * 2 / 16384;
-
-	if (ter_state->mode == FE_TER_MODE_2K)
-		offset = (offset * 4464) / 1000;/*** 1 FFT BIN=4.464khz***/
-	else if (ter_state->mode == FE_TER_MODE_4K)
-		offset = (offset * 223) / 100;/*** 1 FFT BIN=2.23khz***/
-	else  if (ter_state->mode == FE_TER_MODE_8K)
-		offset = (offset * 111) / 100;/*** 1 FFT BIN=1.1khz***/
-
-	if (stv0367_readbits(state, F367TER_PPM_INVSEL) == 1) {
-		if ((stv0367_readbits(state, F367TER_INV_SPECTR) ==
-				(stv0367_readbits(state,
-					F367TER_STATUS_INV_SPECRUM) == 1)))
-			offset = offset * -1;
-	}
-
-	if (ter_state->bw == 6)
-		offset = (offset * 6) / 8;
-	else if (ter_state->bw == 7)
-		offset = (offset * 7) / 8;
-
-	ter_state->frequency += offset;
-
-	tempo = 10;  /* exit even if timing_offset stays null */
-	while ((timing_offset == 0) && (tempo > 0)) {
-		usleep_range(10000, 20000);	/*was 20ms  */
-		/* fine tuning of timing offset if required */
-		timing_offset = stv0367_readbits(state, F367TER_TRL_TOFFSET_LO)
-				+ 256 * stv0367_readbits(state,
-							F367TER_TRL_TOFFSET_HI);
-		if (timing_offset >= 32768)
-			timing_offset -= 65536;
-		trl_nomrate = (512 * stv0367_readbits(state,
-							F367TER_TRL_NOMRATE_HI)
-			+ stv0367_readbits(state, F367TER_TRL_NOMRATE_LO) * 2
-			+ stv0367_readbits(state, F367TER_TRL_NOMRATE_LSB));
-
-		timing_offset = ((signed)(1000000 / trl_nomrate) *
-							timing_offset) / 2048;
-		tempo--;
-	}
-
-	if (timing_offset <= 0) {
-		timing_offset = (timing_offset - 11) / 22;
-		step = -1;
-	} else {
-		timing_offset = (timing_offset + 11) / 22;
-		step = 1;
-	}
-
-	for (counter = 0; counter < abs(timing_offset); counter++) {
-		trl_nomrate += step;
-		stv0367_writebits(state, F367TER_TRL_NOMRATE_LSB,
-						trl_nomrate % 2);
-		stv0367_writebits(state, F367TER_TRL_NOMRATE_LO,
-						trl_nomrate / 2);
-		usleep_range(1000, 2000);
-	}
-
-	usleep_range(5000, 6000);
-	/* unlocks could happen in case of trl centring big step,
-	then a core off/on restarts demod */
-	u_var = stv0367_readbits(state, F367TER_LK);
-
-	if (!u_var) {
-		stv0367_writebits(state, F367TER_CORE_ACTIVE, 0);
-		msleep(20);
-		stv0367_writebits(state, F367TER_CORE_ACTIVE, 1);
-	}
-
-	return 0;
-}
-
-static int stv0367ter_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct stv0367_state *state = fe->demodulator_priv;
-	struct stv0367ter_state *ter_state = state->ter_state;
-
-	/*u8 trials[2]; */
-	s8 num_trials, index;
-	u8 SenseTrials[] = { INVERSION_ON, INVERSION_OFF };
-
-	stv0367ter_init(fe);
-
-	if (fe->ops.tuner_ops.set_params) {
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 1);
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	switch (p->transmission_mode) {
-	default:
-	case TRANSMISSION_MODE_AUTO:
-	case TRANSMISSION_MODE_2K:
-		ter_state->mode = FE_TER_MODE_2K;
-		break;
-/*	case TRANSMISSION_MODE_4K:
-		pLook.mode = FE_TER_MODE_4K;
-		break;*/
-	case TRANSMISSION_MODE_8K:
-		ter_state->mode = FE_TER_MODE_8K;
-		break;
-	}
-
-	switch (p->guard_interval) {
-	default:
-	case GUARD_INTERVAL_1_32:
-	case GUARD_INTERVAL_1_16:
-	case GUARD_INTERVAL_1_8:
-	case GUARD_INTERVAL_1_4:
-		ter_state->guard = p->guard_interval;
-		break;
-	case GUARD_INTERVAL_AUTO:
-		ter_state->guard = GUARD_INTERVAL_1_32;
-		break;
-	}
-
-	switch (p->bandwidth_hz) {
-	case 6000000:
-		ter_state->bw = FE_TER_CHAN_BW_6M;
-		break;
-	case 7000000:
-		ter_state->bw = FE_TER_CHAN_BW_7M;
-		break;
-	case 8000000:
-	default:
-		ter_state->bw = FE_TER_CHAN_BW_8M;
-	}
-
-	ter_state->hierarchy = FE_TER_HIER_NONE;
-
-	switch (p->inversion) {
-	case INVERSION_OFF:
-	case INVERSION_ON:
-		num_trials = 1;
-		break;
-	default:
-		num_trials = 2;
-		if (ter_state->first_lock)
-			num_trials = 1;
-		break;
-	}
-
-	ter_state->state = FE_TER_NOLOCK;
-	index = 0;
-
-	while (((index) < num_trials) && (ter_state->state != FE_TER_LOCKOK)) {
-		if (!ter_state->first_lock) {
-			if (p->inversion == INVERSION_AUTO)
-				ter_state->sense = SenseTrials[index];
-
-		}
-		stv0367ter_algo(fe);
-
-		if ((ter_state->state == FE_TER_LOCKOK) &&
-				(p->inversion == INVERSION_AUTO) &&
-								(index == 1)) {
-			/* invert spectrum sense */
-			SenseTrials[index] = SenseTrials[0];
-			SenseTrials[(index + 1) % 2] = (SenseTrials[1] + 1) % 2;
-		}
-
-		index++;
-	}
-
-	return 0;
-}
-
-static int stv0367ter_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	struct stv0367_state *state = fe->demodulator_priv;
-	struct stv0367ter_state *ter_state = state->ter_state;
-	u32 errs = 0;
-
-	/*wait for counting completion*/
-	if (stv0367_readbits(state, F367TER_SFERRC_OLDVALUE) == 0) {
-		errs =
-			((u32)stv0367_readbits(state, F367TER_ERR_CNT1)
-			* (1 << 16))
-			+ ((u32)stv0367_readbits(state, F367TER_ERR_CNT1_HI)
-			* (1 << 8))
-			+ ((u32)stv0367_readbits(state, F367TER_ERR_CNT1_LO));
-		ter_state->ucblocks = errs;
-	}
-
-	(*ucblocks) = ter_state->ucblocks;
-
-	return 0;
-}
-
-static int stv0367ter_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct stv0367_state *state = fe->demodulator_priv;
-	struct stv0367ter_state *ter_state = state->ter_state;
-
-	int error = 0;
-	enum stv0367_ter_mode mode;
-	int constell = 0,/* snr = 0,*/ Data = 0;
-
-	p->frequency = stv0367_get_tuner_freq(fe);
-	if ((int)p->frequency < 0)
-		p->frequency = -p->frequency;
-
-	constell = stv0367_readbits(state, F367TER_TPS_CONST);
-	if (constell == 0)
-		p->modulation = QPSK;
-	else if (constell == 1)
-		p->modulation = QAM_16;
-	else
-		p->modulation = QAM_64;
-
-	p->inversion = stv0367_readbits(state, F367TER_INV_SPECTR);
-
-	/* Get the Hierarchical mode */
-	Data = stv0367_readbits(state, F367TER_TPS_HIERMODE);
-
-	switch (Data) {
-	case 0:
-		p->hierarchy = HIERARCHY_NONE;
-		break;
-	case 1:
-		p->hierarchy = HIERARCHY_1;
-		break;
-	case 2:
-		p->hierarchy = HIERARCHY_2;
-		break;
-	case 3:
-		p->hierarchy = HIERARCHY_4;
-		break;
-	default:
-		p->hierarchy = HIERARCHY_AUTO;
-		break; /* error */
-	}
-
-	/* Get the FEC Rate */
-	if (ter_state->hierarchy == FE_TER_HIER_LOW_PRIO)
-		Data = stv0367_readbits(state, F367TER_TPS_LPCODE);
-	else
-		Data = stv0367_readbits(state, F367TER_TPS_HPCODE);
-
-	switch (Data) {
-	case 0:
-		p->code_rate_HP = FEC_1_2;
-		break;
-	case 1:
-		p->code_rate_HP = FEC_2_3;
-		break;
-	case 2:
-		p->code_rate_HP = FEC_3_4;
-		break;
-	case 3:
-		p->code_rate_HP = FEC_5_6;
-		break;
-	case 4:
-		p->code_rate_HP = FEC_7_8;
-		break;
-	default:
-		p->code_rate_HP = FEC_AUTO;
-		break; /* error */
-	}
-
-	mode = stv0367_readbits(state, F367TER_SYR_MODE);
-
-	switch (mode) {
-	case FE_TER_MODE_2K:
-		p->transmission_mode = TRANSMISSION_MODE_2K;
-		break;
-/*	case FE_TER_MODE_4K:
-		p->transmission_mode = TRANSMISSION_MODE_4K;
-		break;*/
-	case FE_TER_MODE_8K:
-		p->transmission_mode = TRANSMISSION_MODE_8K;
-		break;
-	default:
-		p->transmission_mode = TRANSMISSION_MODE_AUTO;
-	}
-
-	p->guard_interval = stv0367_readbits(state, F367TER_SYR_GUARD);
-
-	return error;
-}
-
-static int stv0367ter_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct stv0367_state *state = fe->demodulator_priv;
-	u32 snru32 = 0;
-	int cpt = 0;
-	u8 cut = stv0367_readbits(state, F367TER_IDENTIFICATIONREG);
-
-	while (cpt < 10) {
-		usleep_range(2000, 3000);
-		if (cut == 0x50) /*cut 1.0 cut 1.1*/
-			snru32 += stv0367_readbits(state, F367TER_CHCSNR) / 4;
-		else /*cu2.0*/
-			snru32 += 125 * stv0367_readbits(state, F367TER_CHCSNR);
-
-		cpt++;
-	}
-
-	snru32 /= 10;/*average on 10 values*/
-
-	*snr = snru32 / 1000;
-
-	return 0;
-}
-
-#if 0
-static int stv0367ter_status(struct dvb_frontend *fe)
-{
-
-	struct stv0367_state *state = fe->demodulator_priv;
-	struct stv0367ter_state *ter_state = state->ter_state;
-	int locked = FALSE;
-
-	locked = (stv0367_readbits(state, F367TER_LK));
-	if (!locked)
-		ter_state->unlock_counter += 1;
-	else
-		ter_state->unlock_counter = 0;
-
-	if (ter_state->unlock_counter > 2) {
-		if (!stv0367_readbits(state, F367TER_TPS_LOCK) ||
-				(!stv0367_readbits(state, F367TER_LK))) {
-			stv0367_writebits(state, F367TER_CORE_ACTIVE, 0);
-			usleep_range(2000, 3000);
-			stv0367_writebits(state, F367TER_CORE_ACTIVE, 1);
-			msleep(350);
-			locked = (stv0367_readbits(state, F367TER_TPS_LOCK)) &&
-					(stv0367_readbits(state, F367TER_LK));
-		}
-
-	}
-
-	return locked;
-}
-#endif
-static int stv0367ter_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct stv0367_state *state = fe->demodulator_priv;
-
-	dprintk("%s:\n", __func__);
-
-	*status = 0;
-
-	if (stv0367_readbits(state, F367TER_LK)) {
-		*status |= FE_HAS_LOCK;
-		dprintk("%s: stv0367 has locked\n", __func__);
-	}
-
-	return 0;
-}
-
-static int stv0367ter_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct stv0367_state *state = fe->demodulator_priv;
-	struct stv0367ter_state *ter_state = state->ter_state;
-	u32 Errors = 0, tber = 0, temporary = 0;
-	int abc = 0, def = 0;
-
-
-	/*wait for counting completion*/
-	if (stv0367_readbits(state, F367TER_SFERRC_OLDVALUE) == 0)
-		Errors = ((u32)stv0367_readbits(state, F367TER_SFEC_ERR_CNT)
-			* (1 << 16))
-			+ ((u32)stv0367_readbits(state, F367TER_SFEC_ERR_CNT_HI)
-			* (1 << 8))
-			+ ((u32)stv0367_readbits(state,
-						F367TER_SFEC_ERR_CNT_LO));
-	/*measurement not completed, load previous value*/
-	else {
-		tber = ter_state->pBER;
-		return 0;
-	}
-
-	abc = stv0367_readbits(state, F367TER_SFEC_ERR_SOURCE);
-	def = stv0367_readbits(state, F367TER_SFEC_NUM_EVENT);
-
-	if (Errors == 0) {
-		tber = 0;
-	} else if (abc == 0x7) {
-		if (Errors <= 4) {
-			temporary = (Errors * 1000000000) / (8 * (1 << 14));
-			temporary =  temporary;
-		} else if (Errors <= 42) {
-			temporary = (Errors * 100000000) / (8 * (1 << 14));
-			temporary = temporary * 10;
-		} else if (Errors <= 429) {
-			temporary = (Errors * 10000000) / (8 * (1 << 14));
-			temporary = temporary * 100;
-		} else if (Errors <= 4294) {
-			temporary = (Errors * 1000000) / (8 * (1 << 14));
-			temporary = temporary * 1000;
-		} else if (Errors <= 42949) {
-			temporary = (Errors * 100000) / (8 * (1 << 14));
-			temporary = temporary * 10000;
-		} else if (Errors <= 429496) {
-			temporary = (Errors * 10000) / (8 * (1 << 14));
-			temporary = temporary * 100000;
-		} else { /*if (Errors<4294967) 2^22 max error*/
-			temporary = (Errors * 1000) / (8 * (1 << 14));
-			temporary = temporary * 100000;	/* still to *10 */
-		}
-
-		/* Byte error*/
-		if (def == 2)
-			/*tber=Errors/(8*(1 <<14));*/
-			tber = temporary;
-		else if (def == 3)
-			/*tber=Errors/(8*(1 <<16));*/
-			tber = temporary / 4;
-		else if (def == 4)
-			/*tber=Errors/(8*(1 <<18));*/
-			tber = temporary / 16;
-		else if (def == 5)
-			/*tber=Errors/(8*(1 <<20));*/
-			tber = temporary / 64;
-		else if (def == 6)
-			/*tber=Errors/(8*(1 <<22));*/
-			tber = temporary / 256;
-		else
-			/* should not pass here*/
-			tber = 0;
-
-		if ((Errors < 4294967) && (Errors > 429496))
-			tber *= 10;
-
-	}
-
-	/* save actual value */
-	ter_state->pBER = tber;
-
-	(*ber) = tber;
-
-	return 0;
-}
-#if 0
-static u32 stv0367ter_get_per(struct stv0367_state *state)
-{
-	struct stv0367ter_state *ter_state = state->ter_state;
-	u32 Errors = 0, Per = 0, temporary = 0;
-	int abc = 0, def = 0, cpt = 0;
-
-	while (((stv0367_readbits(state, F367TER_SFERRC_OLDVALUE) == 1) &&
-			(cpt < 400)) || ((Errors == 0) && (cpt < 400))) {
-		usleep_range(1000, 2000);
-		Errors = ((u32)stv0367_readbits(state, F367TER_ERR_CNT1)
-			* (1 << 16))
-			+ ((u32)stv0367_readbits(state, F367TER_ERR_CNT1_HI)
-			* (1 << 8))
-			+ ((u32)stv0367_readbits(state, F367TER_ERR_CNT1_LO));
-		cpt++;
-	}
-	abc = stv0367_readbits(state, F367TER_ERR_SRC1);
-	def = stv0367_readbits(state, F367TER_NUM_EVT1);
-
-	if (Errors == 0)
-		Per = 0;
-	else if (abc == 0x9) {
-		if (Errors <= 4) {
-			temporary = (Errors * 1000000000) / (8 * (1 << 8));
-			temporary =  temporary;
-		} else if (Errors <= 42) {
-			temporary = (Errors * 100000000) / (8 * (1 << 8));
-			temporary = temporary * 10;
-		} else if (Errors <= 429) {
-			temporary = (Errors * 10000000) / (8 * (1 << 8));
-			temporary = temporary * 100;
-		} else if (Errors <= 4294) {
-			temporary = (Errors * 1000000) / (8 * (1 << 8));
-			temporary = temporary * 1000;
-		} else if (Errors <= 42949) {
-			temporary = (Errors * 100000) / (8 * (1 << 8));
-			temporary = temporary * 10000;
-		} else { /*if(Errors<=429496)  2^16 errors max*/
-			temporary = (Errors * 10000) / (8 * (1 << 8));
-			temporary = temporary * 100000;
-		}
-
-		/* pkt error*/
-		if (def == 2)
-			/*Per=Errors/(1 << 8);*/
-			Per = temporary;
-		else if (def == 3)
-			/*Per=Errors/(1 << 10);*/
-			Per = temporary / 4;
-		else if (def == 4)
-			/*Per=Errors/(1 << 12);*/
-			Per = temporary / 16;
-		else if (def == 5)
-			/*Per=Errors/(1 << 14);*/
-			Per = temporary / 64;
-		else if (def == 6)
-			/*Per=Errors/(1 << 16);*/
-			Per = temporary / 256;
-		else
-			Per = 0;
-
-	}
-	/* save actual value */
-	ter_state->pPER = Per;
-
-	return Per;
-}
-#endif
-static int stv0367_get_tune_settings(struct dvb_frontend *fe,
-					struct dvb_frontend_tune_settings
-					*fe_tune_settings)
-{
-	fe_tune_settings->min_delay_ms = 1000;
-	fe_tune_settings->step_size = 0;
-	fe_tune_settings->max_drift = 0;
-
-	return 0;
-}
-
-static void stv0367_release(struct dvb_frontend *fe)
-{
-	struct stv0367_state *state = fe->demodulator_priv;
-
-	kfree(state->ter_state);
-	kfree(state->cab_state);
-	kfree(state);
-}
-
-static struct dvb_frontend_ops stv0367ter_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name			= "ST STV0367 DVB-T",
-		.frequency_min		= 47000000,
-		.frequency_max		= 862000000,
-		.frequency_stepsize	= 15625,
-		.frequency_tolerance	= 0,
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
-			FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
-			FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
-			FE_CAN_QAM_128 | FE_CAN_QAM_256 | FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER |
-			FE_CAN_INVERSION_AUTO |
-			FE_CAN_MUTE_TS
-	},
-	.release = stv0367_release,
-	.init = stv0367ter_init,
-	.sleep = stv0367ter_sleep,
-	.i2c_gate_ctrl = stv0367ter_gate_ctrl,
-	.set_frontend = stv0367ter_set_frontend,
-	.get_frontend = stv0367ter_get_frontend,
-	.get_tune_settings = stv0367_get_tune_settings,
-	.read_status = stv0367ter_read_status,
-	.read_ber = stv0367ter_read_ber,/* too slow */
-/*	.read_signal_strength = stv0367_read_signal_strength,*/
-	.read_snr = stv0367ter_read_snr,
-	.read_ucblocks = stv0367ter_read_ucblocks,
-};
-
-struct dvb_frontend *stv0367ter_attach(const struct stv0367_config *config,
-				   struct i2c_adapter *i2c)
-{
-	struct stv0367_state *state = NULL;
-	struct stv0367ter_state *ter_state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct stv0367_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-	ter_state = kzalloc(sizeof(struct stv0367ter_state), GFP_KERNEL);
-	if (ter_state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->i2c = i2c;
-	state->config = config;
-	state->ter_state = ter_state;
-	state->fe.ops = stv0367ter_ops;
-	state->fe.demodulator_priv = state;
-	state->chip_id = stv0367_readreg(state, 0xf000);
-
-	dprintk("%s: chip_id = 0x%x\n", __func__, state->chip_id);
-
-	/* check if the demod is there */
-	if ((state->chip_id != 0x50) && (state->chip_id != 0x60))
-		goto error;
-
-	return &state->fe;
-
-error:
-	kfree(ter_state);
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(stv0367ter_attach);
-
-static int stv0367cab_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct stv0367_state *state = fe->demodulator_priv;
-
-	dprintk("%s:\n", __func__);
-
-	stv0367_writebits(state, F367CAB_I2CT_ON, (enable > 0) ? 1 : 0);
-
-	return 0;
-}
-
-static u32 stv0367cab_get_mclk(struct dvb_frontend *fe, u32 ExtClk_Hz)
-{
-	struct stv0367_state *state = fe->demodulator_priv;
-	u32 mclk_Hz = 0;/* master clock frequency (Hz) */
-	u32 M, N, P;
-
-
-	if (stv0367_readbits(state, F367CAB_BYPASS_PLLXN) == 0) {
-		N = (u32)stv0367_readbits(state, F367CAB_PLL_NDIV);
-		if (N == 0)
-			N = N + 1;
-
-		M = (u32)stv0367_readbits(state, F367CAB_PLL_MDIV);
-		if (M == 0)
-			M = M + 1;
-
-		P = (u32)stv0367_readbits(state, F367CAB_PLL_PDIV);
-
-		if (P > 5)
-			P = 5;
-
-		mclk_Hz = ((ExtClk_Hz / 2) * N) / (M * (1 << P));
-		dprintk("stv0367cab_get_mclk BYPASS_PLLXN mclk_Hz=%d\n",
-								mclk_Hz);
-	} else
-		mclk_Hz = ExtClk_Hz;
-
-	dprintk("stv0367cab_get_mclk final mclk_Hz=%d\n", mclk_Hz);
-
-	return mclk_Hz;
-}
-
-static u32 stv0367cab_get_adc_freq(struct dvb_frontend *fe, u32 ExtClk_Hz)
-{
-	u32 ADCClk_Hz = ExtClk_Hz;
-
-	ADCClk_Hz = stv0367cab_get_mclk(fe, ExtClk_Hz);
-
-	return ADCClk_Hz;
-}
-
-enum stv0367cab_mod stv0367cab_SetQamSize(struct stv0367_state *state,
-					u32 SymbolRate,
-					enum stv0367cab_mod QAMSize)
-{
-	/* Set QAM size */
-	stv0367_writebits(state, F367CAB_QAM_MODE, QAMSize);
-
-	/* Set Registers settings specific to the QAM size */
-	switch (QAMSize) {
-	case FE_CAB_MOD_QAM4:
-		stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x00);
-		break;
-	case FE_CAB_MOD_QAM16:
-		stv0367_writereg(state, R367CAB_AGC_PWR_REF_L, 0x64);
-		stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x00);
-		stv0367_writereg(state, R367CAB_FSM_STATE, 0x90);
-		stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xc1);
-		stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa7);
-		stv0367_writereg(state, R367CAB_EQU_CRL_LD_SEN, 0x95);
-		stv0367_writereg(state, R367CAB_EQU_CRL_LIMITER, 0x40);
-		stv0367_writereg(state, R367CAB_EQU_PNT_GAIN, 0x8a);
-		break;
-	case FE_CAB_MOD_QAM32:
-		stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x00);
-		stv0367_writereg(state, R367CAB_AGC_PWR_REF_L, 0x6e);
-		stv0367_writereg(state, R367CAB_FSM_STATE, 0xb0);
-		stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xc1);
-		stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xb7);
-		stv0367_writereg(state, R367CAB_EQU_CRL_LD_SEN, 0x9d);
-		stv0367_writereg(state, R367CAB_EQU_CRL_LIMITER, 0x7f);
-		stv0367_writereg(state, R367CAB_EQU_PNT_GAIN, 0xa7);
-		break;
-	case FE_CAB_MOD_QAM64:
-		stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x82);
-		stv0367_writereg(state, R367CAB_AGC_PWR_REF_L, 0x5a);
-		if (SymbolRate > 45000000) {
-			stv0367_writereg(state, R367CAB_FSM_STATE, 0xb0);
-			stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xc1);
-			stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa5);
-		} else if (SymbolRate > 25000000) {
-			stv0367_writereg(state, R367CAB_FSM_STATE, 0xa0);
-			stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xc1);
-			stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa6);
-		} else {
-			stv0367_writereg(state, R367CAB_FSM_STATE, 0xa0);
-			stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xd1);
-			stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa7);
-		}
-		stv0367_writereg(state, R367CAB_EQU_CRL_LD_SEN, 0x95);
-		stv0367_writereg(state, R367CAB_EQU_CRL_LIMITER, 0x40);
-		stv0367_writereg(state, R367CAB_EQU_PNT_GAIN, 0x99);
-		break;
-	case FE_CAB_MOD_QAM128:
-		stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x00);
-		stv0367_writereg(state, R367CAB_AGC_PWR_REF_L, 0x76);
-		stv0367_writereg(state, R367CAB_FSM_STATE, 0x90);
-		stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xb1);
-		if (SymbolRate > 45000000)
-			stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa7);
-		else if (SymbolRate > 25000000)
-			stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa6);
-		else
-			stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0x97);
-
-		stv0367_writereg(state, R367CAB_EQU_CRL_LD_SEN, 0x8e);
-		stv0367_writereg(state, R367CAB_EQU_CRL_LIMITER, 0x7f);
-		stv0367_writereg(state, R367CAB_EQU_PNT_GAIN, 0xa7);
-		break;
-	case FE_CAB_MOD_QAM256:
-		stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x94);
-		stv0367_writereg(state, R367CAB_AGC_PWR_REF_L, 0x5a);
-		stv0367_writereg(state, R367CAB_FSM_STATE, 0xa0);
-		if (SymbolRate > 45000000)
-			stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xc1);
-		else if (SymbolRate > 25000000)
-			stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xc1);
-		else
-			stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xd1);
-
-		stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa7);
-		stv0367_writereg(state, R367CAB_EQU_CRL_LD_SEN, 0x85);
-		stv0367_writereg(state, R367CAB_EQU_CRL_LIMITER, 0x40);
-		stv0367_writereg(state, R367CAB_EQU_PNT_GAIN, 0xa7);
-		break;
-	case FE_CAB_MOD_QAM512:
-		stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x00);
-		break;
-	case FE_CAB_MOD_QAM1024:
-		stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x00);
-		break;
-	default:
-		break;
-	}
-
-	return QAMSize;
-}
-
-static u32 stv0367cab_set_derot_freq(struct stv0367_state *state,
-					u32 adc_hz, s32 derot_hz)
-{
-	u32 sampled_if = 0;
-	u32 adc_khz;
-
-	adc_khz = adc_hz / 1000;
-
-	dprintk("%s: adc_hz=%d derot_hz=%d\n", __func__, adc_hz, derot_hz);
-
-	if (adc_khz != 0) {
-		if (derot_hz < 1000000)
-			derot_hz = adc_hz / 4; /* ZIF operation */
-		if (derot_hz > adc_hz)
-			derot_hz = derot_hz - adc_hz;
-		sampled_if = (u32)derot_hz / 1000;
-		sampled_if *= 32768;
-		sampled_if /= adc_khz;
-		sampled_if *= 256;
-	}
-
-	if (sampled_if > 8388607)
-		sampled_if = 8388607;
-
-	dprintk("%s: sampled_if=0x%x\n", __func__, sampled_if);
-
-	stv0367_writereg(state, R367CAB_MIX_NCO_LL, sampled_if);
-	stv0367_writereg(state, R367CAB_MIX_NCO_HL, (sampled_if >> 8));
-	stv0367_writebits(state, F367CAB_MIX_NCO_INC_HH, (sampled_if >> 16));
-
-	return derot_hz;
-}
-
-static u32 stv0367cab_get_derot_freq(struct stv0367_state *state, u32 adc_hz)
-{
-	u32 sampled_if;
-
-	sampled_if = stv0367_readbits(state, F367CAB_MIX_NCO_INC_LL) +
-			(stv0367_readbits(state, F367CAB_MIX_NCO_INC_HL) << 8) +
-			(stv0367_readbits(state, F367CAB_MIX_NCO_INC_HH) << 16);
-
-	sampled_if /= 256;
-	sampled_if *= (adc_hz / 1000);
-	sampled_if += 1;
-	sampled_if /= 32768;
-
-	return sampled_if;
-}
-
-static u32 stv0367cab_set_srate(struct stv0367_state *state, u32 adc_hz,
-			u32 mclk_hz, u32 SymbolRate,
-			enum stv0367cab_mod QAMSize)
-{
-	u32 QamSizeCorr = 0;
-	u32 u32_tmp = 0, u32_tmp1 = 0;
-	u32 adp_khz;
-
-	dprintk("%s:\n", __func__);
-
-	/* Set Correction factor of SRC gain */
-	switch (QAMSize) {
-	case FE_CAB_MOD_QAM4:
-		QamSizeCorr = 1110;
-		break;
-	case FE_CAB_MOD_QAM16:
-		QamSizeCorr = 1032;
-		break;
-	case FE_CAB_MOD_QAM32:
-		QamSizeCorr =  954;
-		break;
-	case FE_CAB_MOD_QAM64:
-		QamSizeCorr =  983;
-		break;
-	case FE_CAB_MOD_QAM128:
-		QamSizeCorr =  957;
-		break;
-	case FE_CAB_MOD_QAM256:
-		QamSizeCorr =  948;
-		break;
-	case FE_CAB_MOD_QAM512:
-		QamSizeCorr =    0;
-		break;
-	case FE_CAB_MOD_QAM1024:
-		QamSizeCorr =  944;
-		break;
-	default:
-		break;
-	}
-
-	/* Transfer ratio calculation */
-	if (adc_hz != 0) {
-		u32_tmp = 256 * SymbolRate;
-		u32_tmp = u32_tmp / adc_hz;
-	}
-	stv0367_writereg(state, R367CAB_EQU_CRL_TFR, (u8)u32_tmp);
-
-	/* Symbol rate and SRC gain calculation */
-	adp_khz = (mclk_hz >> 1) / 1000;/* TRL works at half the system clock */
-	if (adp_khz != 0) {
-		u32_tmp = SymbolRate;
-		u32_tmp1 = SymbolRate;
-
-		if (u32_tmp < 2097152) { /* 2097152 = 2^21 */
-			/* Symbol rate calculation */
-			u32_tmp *= 2048; /* 2048 = 2^11 */
-			u32_tmp = u32_tmp / adp_khz;
-			u32_tmp = u32_tmp * 16384; /* 16384 = 2^14 */
-			u32_tmp /= 125 ; /* 125 = 1000/2^3 */
-			u32_tmp = u32_tmp * 8; /* 8 = 2^3 */
-
-			/* SRC Gain Calculation */
-			u32_tmp1 *= 2048; /* *2*2^10 */
-			u32_tmp1 /= 439; /* *2/878 */
-			u32_tmp1 *= 256; /* *2^8 */
-			u32_tmp1 = u32_tmp1 / adp_khz; /* /(AdpClk in kHz) */
-			u32_tmp1 *= QamSizeCorr * 9; /* *1000*corr factor */
-			u32_tmp1 = u32_tmp1 / 10000000;
-
-		} else if (u32_tmp < 4194304) { /* 4194304 = 2**22 */
-			/* Symbol rate calculation */
-			u32_tmp *= 1024 ; /* 1024 = 2**10 */
-			u32_tmp = u32_tmp / adp_khz;
-			u32_tmp = u32_tmp * 16384; /* 16384 = 2**14 */
-			u32_tmp /= 125 ; /* 125 = 1000/2**3 */
-			u32_tmp = u32_tmp * 16; /* 16 = 2**4 */
-
-			/* SRC Gain Calculation */
-			u32_tmp1 *= 1024; /* *2*2^9 */
-			u32_tmp1 /= 439; /* *2/878 */
-			u32_tmp1 *= 256; /* *2^8 */
-			u32_tmp1 = u32_tmp1 / adp_khz; /* /(AdpClk in kHz)*/
-			u32_tmp1 *= QamSizeCorr * 9; /* *1000*corr factor */
-			u32_tmp1 = u32_tmp1 / 5000000;
-		} else if (u32_tmp < 8388607) { /* 8388607 = 2**23 */
-			/* Symbol rate calculation */
-			u32_tmp *= 512 ; /* 512 = 2**9 */
-			u32_tmp = u32_tmp / adp_khz;
-			u32_tmp = u32_tmp * 16384; /* 16384 = 2**14 */
-			u32_tmp /= 125 ; /* 125 = 1000/2**3 */
-			u32_tmp = u32_tmp * 32; /* 32 = 2**5 */
-
-			/* SRC Gain Calculation */
-			u32_tmp1 *= 512; /* *2*2^8 */
-			u32_tmp1 /= 439; /* *2/878 */
-			u32_tmp1 *= 256; /* *2^8 */
-			u32_tmp1 = u32_tmp1 / adp_khz; /* /(AdpClk in kHz) */
-			u32_tmp1 *= QamSizeCorr * 9; /* *1000*corr factor */
-			u32_tmp1 = u32_tmp1 / 2500000;
-		} else {
-			/* Symbol rate calculation */
-			u32_tmp *= 256 ; /* 256 = 2**8 */
-			u32_tmp = u32_tmp / adp_khz;
-			u32_tmp = u32_tmp * 16384; /* 16384 = 2**13 */
-			u32_tmp /= 125 ; /* 125 = 1000/2**3 */
-			u32_tmp = u32_tmp * 64; /* 64 = 2**6 */
-
-			/* SRC Gain Calculation */
-			u32_tmp1 *= 256; /* 2*2^7 */
-			u32_tmp1 /= 439; /* *2/878 */
-			u32_tmp1 *= 256; /* *2^8 */
-			u32_tmp1 = u32_tmp1 / adp_khz; /* /(AdpClk in kHz) */
-			u32_tmp1 *= QamSizeCorr * 9; /* *1000*corr factor */
-			u32_tmp1 = u32_tmp1 / 1250000;
-		}
-	}
-#if 0
-	/* Filters' coefficients are calculated and written
-	into registers only if the filters are enabled */
-	if (stv0367_readbits(state, F367CAB_ADJ_EN)) {
-		stv0367cab_SetIirAdjacentcoefficient(state, mclk_hz,
-								SymbolRate);
-		/* AllPass filter must be enabled
-		when the adjacents filter is used */
-		stv0367_writebits(state, F367CAB_ALLPASSFILT_EN, 1);
-		stv0367cab_SetAllPasscoefficient(state, mclk_hz, SymbolRate);
-	} else
-		/* AllPass filter must be disabled
-		when the adjacents filter is not used */
-#endif
-	stv0367_writebits(state, F367CAB_ALLPASSFILT_EN, 0);
-
-	stv0367_writereg(state, R367CAB_SRC_NCO_LL, u32_tmp);
-	stv0367_writereg(state, R367CAB_SRC_NCO_LH, (u32_tmp >> 8));
-	stv0367_writereg(state, R367CAB_SRC_NCO_HL, (u32_tmp >> 16));
-	stv0367_writereg(state, R367CAB_SRC_NCO_HH, (u32_tmp >> 24));
-
-	stv0367_writereg(state, R367CAB_IQDEM_GAIN_SRC_L, u32_tmp1 & 0x00ff);
-	stv0367_writebits(state, F367CAB_GAIN_SRC_HI, (u32_tmp1 >> 8) & 0x00ff);
-
-	return SymbolRate ;
-}
-
-static u32 stv0367cab_GetSymbolRate(struct stv0367_state *state, u32 mclk_hz)
-{
-	u32 regsym;
-	u32 adp_khz;
-
-	regsym = stv0367_readreg(state, R367CAB_SRC_NCO_LL) +
-		(stv0367_readreg(state, R367CAB_SRC_NCO_LH) << 8) +
-		(stv0367_readreg(state, R367CAB_SRC_NCO_HL) << 16) +
-		(stv0367_readreg(state, R367CAB_SRC_NCO_HH) << 24);
-
-	adp_khz = (mclk_hz >> 1) / 1000;/* TRL works at half the system clock */
-
-	if (regsym < 134217728) {		/* 134217728L = 2**27*/
-		regsym = regsym * 32;		/* 32 = 2**5 */
-		regsym = regsym / 32768;	/* 32768L = 2**15 */
-		regsym = adp_khz * regsym;	/* AdpClk in kHz */
-		regsym = regsym / 128;		/* 128 = 2**7 */
-		regsym *= 125 ;			/* 125 = 1000/2**3 */
-		regsym /= 2048 ;		/* 2048 = 2**11	*/
-	} else if (regsym < 268435456) {	/* 268435456L = 2**28 */
-		regsym = regsym * 16;		/* 16 = 2**4 */
-		regsym = regsym / 32768;	/* 32768L = 2**15 */
-		regsym = adp_khz * regsym;	/* AdpClk in kHz */
-		regsym = regsym / 128;		/* 128 = 2**7 */
-		regsym *= 125 ;			/* 125 = 1000/2**3*/
-		regsym /= 1024 ;		/* 256 = 2**10*/
-	} else if (regsym < 536870912) {	/* 536870912L = 2**29*/
-		regsym = regsym * 8;		/* 8 = 2**3 */
-		regsym = regsym / 32768;	/* 32768L = 2**15 */
-		regsym = adp_khz * regsym;	/* AdpClk in kHz */
-		regsym = regsym / 128;		/* 128 = 2**7 */
-		regsym *= 125 ;			/* 125 = 1000/2**3 */
-		regsym /= 512 ;			/* 128 = 2**9 */
-	} else {
-		regsym = regsym * 4;		/* 4 = 2**2 */
-		regsym = regsym / 32768;	/* 32768L = 2**15 */
-		regsym = adp_khz * regsym;	/* AdpClk in kHz */
-		regsym = regsym / 128;		/* 128 = 2**7 */
-		regsym *= 125 ;			/* 125 = 1000/2**3 */
-		regsym /= 256 ;			/* 64 = 2**8 */
-	}
-
-	return regsym;
-}
-
-static int stv0367cab_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct stv0367_state *state = fe->demodulator_priv;
-
-	dprintk("%s:\n", __func__);
-
-	*status = 0;
-
-	if (stv0367_readbits(state, F367CAB_QAMFEC_LOCK)) {
-		*status |= FE_HAS_LOCK;
-		dprintk("%s: stv0367 has locked\n", __func__);
-	}
-
-	return 0;
-}
-
-static int stv0367cab_standby(struct dvb_frontend *fe, u8 standby_on)
-{
-	struct stv0367_state *state = fe->demodulator_priv;
-
-	dprintk("%s:\n", __func__);
-
-	if (standby_on) {
-		stv0367_writebits(state, F367CAB_BYPASS_PLLXN, 0x03);
-		stv0367_writebits(state, F367CAB_STDBY_PLLXN, 0x01);
-		stv0367_writebits(state, F367CAB_STDBY, 1);
-		stv0367_writebits(state, F367CAB_STDBY_CORE, 1);
-		stv0367_writebits(state, F367CAB_EN_BUFFER_I, 0);
-		stv0367_writebits(state, F367CAB_EN_BUFFER_Q, 0);
-		stv0367_writebits(state, F367CAB_POFFQ, 1);
-		stv0367_writebits(state, F367CAB_POFFI, 1);
-	} else {
-		stv0367_writebits(state, F367CAB_STDBY_PLLXN, 0x00);
-		stv0367_writebits(state, F367CAB_BYPASS_PLLXN, 0x00);
-		stv0367_writebits(state, F367CAB_STDBY, 0);
-		stv0367_writebits(state, F367CAB_STDBY_CORE, 0);
-		stv0367_writebits(state, F367CAB_EN_BUFFER_I, 1);
-		stv0367_writebits(state, F367CAB_EN_BUFFER_Q, 1);
-		stv0367_writebits(state, F367CAB_POFFQ, 0);
-		stv0367_writebits(state, F367CAB_POFFI, 0);
-	}
-
-	return 0;
-}
-
-static int stv0367cab_sleep(struct dvb_frontend *fe)
-{
-	return stv0367cab_standby(fe, 1);
-}
-
-int stv0367cab_init(struct dvb_frontend *fe)
-{
-	struct stv0367_state *state = fe->demodulator_priv;
-	struct stv0367cab_state *cab_state = state->cab_state;
-	int i;
-
-	dprintk("%s:\n", __func__);
-
-	for (i = 0; i < STV0367CAB_NBREGS; i++)
-		stv0367_writereg(state, def0367cab[i].addr,
-						def0367cab[i].value);
-
-	switch (state->config->ts_mode) {
-	case STV0367_DVBCI_CLOCK:
-		dprintk("Setting TSMode = STV0367_DVBCI_CLOCK\n");
-		stv0367_writebits(state, F367CAB_OUTFORMAT, 0x03);
-		break;
-	case STV0367_SERIAL_PUNCT_CLOCK:
-	case STV0367_SERIAL_CONT_CLOCK:
-		stv0367_writebits(state, F367CAB_OUTFORMAT, 0x01);
-		break;
-	case STV0367_PARALLEL_PUNCT_CLOCK:
-	case STV0367_OUTPUTMODE_DEFAULT:
-		stv0367_writebits(state, F367CAB_OUTFORMAT, 0x00);
-		break;
-	}
-
-	switch (state->config->clk_pol) {
-	case STV0367_RISINGEDGE_CLOCK:
-		stv0367_writebits(state, F367CAB_CLK_POLARITY, 0x00);
-		break;
-	case STV0367_FALLINGEDGE_CLOCK:
-	case STV0367_CLOCKPOLARITY_DEFAULT:
-		stv0367_writebits(state, F367CAB_CLK_POLARITY, 0x01);
-		break;
-	}
-
-	stv0367_writebits(state, F367CAB_SYNC_STRIP, 0x00);
-
-	stv0367_writebits(state, F367CAB_CT_NBST, 0x01);
-
-	stv0367_writebits(state, F367CAB_TS_SWAP, 0x01);
-
-	stv0367_writebits(state, F367CAB_FIFO_BYPASS, 0x00);
-
-	stv0367_writereg(state, R367CAB_ANACTRL, 0x00);/*PLL enabled and used */
-
-	cab_state->mclk = stv0367cab_get_mclk(fe, state->config->xtal);
-	cab_state->adc_clk = stv0367cab_get_adc_freq(fe, state->config->xtal);
-
-	return 0;
-}
-static
-enum stv0367_cab_signal_type stv0367cab_algo(struct stv0367_state *state,
-					     struct dtv_frontend_properties *p)
-{
-	struct stv0367cab_state *cab_state = state->cab_state;
-	enum stv0367_cab_signal_type signalType = FE_CAB_NOAGC;
-	u32	QAMFEC_Lock, QAM_Lock, u32_tmp,
-		LockTime, TRLTimeOut, AGCTimeOut, CRLSymbols,
-		CRLTimeOut, EQLTimeOut, DemodTimeOut, FECTimeOut;
-	u8	TrackAGCAccum;
-	s32	tmp;
-
-	dprintk("%s:\n", __func__);
-
-	/* Timeouts calculation */
-	/* A max lock time of 25 ms is allowed for delayed AGC */
-	AGCTimeOut = 25;
-	/* 100000 symbols needed by the TRL as a maximum value */
-	TRLTimeOut = 100000000 / p->symbol_rate;
-	/* CRLSymbols is the needed number of symbols to achieve a lock
-	   within [-4%, +4%] of the symbol rate.
-	   CRL timeout is calculated
-	   for a lock within [-search_range, +search_range].
-	   EQL timeout can be changed depending on
-	   the micro-reflections we want to handle.
-	   A characterization must be performed
-	   with these echoes to get new timeout values.
-	*/
-	switch (p->modulation) {
-	case QAM_16:
-		CRLSymbols = 150000;
-		EQLTimeOut = 100;
-		break;
-	case QAM_32:
-		CRLSymbols = 250000;
-		EQLTimeOut = 100;
-		break;
-	case QAM_64:
-		CRLSymbols = 200000;
-		EQLTimeOut = 100;
-		break;
-	case QAM_128:
-		CRLSymbols = 250000;
-		EQLTimeOut = 100;
-		break;
-	case QAM_256:
-		CRLSymbols = 250000;
-		EQLTimeOut = 100;
-		break;
-	default:
-		CRLSymbols = 200000;
-		EQLTimeOut = 100;
-		break;
-	}
-#if 0
-	if (pIntParams->search_range < 0) {
-		CRLTimeOut = (25 * CRLSymbols *
-				(-pIntParams->search_range / 1000)) /
-					(pIntParams->symbol_rate / 1000);
-	} else
-#endif
-	CRLTimeOut = (25 * CRLSymbols * (cab_state->search_range / 1000)) /
-					(p->symbol_rate / 1000);
-
-	CRLTimeOut = (1000 * CRLTimeOut) / p->symbol_rate;
-	/* Timeouts below 50ms are coerced */
-	if (CRLTimeOut < 50)
-		CRLTimeOut = 50;
-	/* A maximum of 100 TS packets is needed to get FEC lock even in case
-	the spectrum inversion needs to be changed.
-	   This is equal to 20 ms in case of the lowest symbol rate of 0.87Msps
-	*/
-	FECTimeOut = 20;
-	DemodTimeOut = AGCTimeOut + TRLTimeOut + CRLTimeOut + EQLTimeOut;
-
-	dprintk("%s: DemodTimeOut=%d\n", __func__, DemodTimeOut);
-
-	/* Reset the TRL to ensure nothing starts until the
-	   AGC is stable which ensures a better lock time
-	*/
-	stv0367_writereg(state, R367CAB_CTRL_1, 0x04);
-	/* Set AGC accumulation time to minimum and lock threshold to maximum
-	in order to speed up the AGC lock */
-	TrackAGCAccum = stv0367_readbits(state, F367CAB_AGC_ACCUMRSTSEL);
-	stv0367_writebits(state, F367CAB_AGC_ACCUMRSTSEL, 0x0);
-	/* Modulus Mapper is disabled */
-	stv0367_writebits(state, F367CAB_MODULUSMAP_EN, 0);
-	/* Disable the sweep function */
-	stv0367_writebits(state, F367CAB_SWEEP_EN, 0);
-	/* The sweep function is never used, Sweep rate must be set to 0 */
-	/* Set the derotator frequency in Hz */
-	stv0367cab_set_derot_freq(state, cab_state->adc_clk,
-		(1000 * (s32)state->config->if_khz + cab_state->derot_offset));
-	/* Disable the Allpass Filter when the symbol rate is out of range */
-	if ((p->symbol_rate > 10800000) | (p->symbol_rate < 1800000)) {
-		stv0367_writebits(state, F367CAB_ADJ_EN, 0);
-		stv0367_writebits(state, F367CAB_ALLPASSFILT_EN, 0);
-	}
-#if 0
-	/* Check if the tuner is locked */
-	tuner_lock = stv0367cab_tuner_get_status(fe);
-	if (tuner_lock == 0)
-		return FE_367CAB_NOTUNER;
-#endif
-	/* Relase the TRL to start demodulator acquisition */
-	/* Wait for QAM lock */
-	LockTime = 0;
-	stv0367_writereg(state, R367CAB_CTRL_1, 0x00);
-	do {
-		QAM_Lock = stv0367_readbits(state, F367CAB_FSM_STATUS);
-		if ((LockTime >= (DemodTimeOut - EQLTimeOut)) &&
-							(QAM_Lock == 0x04))
-			/*
-			 * We don't wait longer, the frequency/phase offset
-			 * must be too big
-			 */
-			LockTime = DemodTimeOut;
-		else if ((LockTime >= (AGCTimeOut + TRLTimeOut)) &&
-							(QAM_Lock == 0x02))
-			/*
-			 * We don't wait longer, either there is no signal or
-			 * it is not the right symbol rate or it is an analog
-			 * carrier
-			 */
-		{
-			LockTime = DemodTimeOut;
-			u32_tmp = stv0367_readbits(state,
-						F367CAB_AGC_PWR_WORD_LO) +
-					(stv0367_readbits(state,
-						F367CAB_AGC_PWR_WORD_ME) << 8) +
-					(stv0367_readbits(state,
-						F367CAB_AGC_PWR_WORD_HI) << 16);
-			if (u32_tmp >= 131072)
-				u32_tmp = 262144 - u32_tmp;
-			u32_tmp = u32_tmp / (1 << (11 - stv0367_readbits(state,
-							F367CAB_AGC_IF_BWSEL)));
-
-			if (u32_tmp < stv0367_readbits(state,
-						F367CAB_AGC_PWRREF_LO) +
-					256 * stv0367_readbits(state,
-						F367CAB_AGC_PWRREF_HI) - 10)
-				QAM_Lock = 0x0f;
-		} else {
-			usleep_range(10000, 20000);
-			LockTime += 10;
-		}
-		dprintk("QAM_Lock=0x%x LockTime=%d\n", QAM_Lock, LockTime);
-		tmp = stv0367_readreg(state, R367CAB_IT_STATUS1);
-
-		dprintk("R367CAB_IT_STATUS1=0x%x\n", tmp);
-
-	} while (((QAM_Lock != 0x0c) && (QAM_Lock != 0x0b)) &&
-						(LockTime < DemodTimeOut));
-
-	dprintk("QAM_Lock=0x%x\n", QAM_Lock);
-
-	tmp = stv0367_readreg(state, R367CAB_IT_STATUS1);
-	dprintk("R367CAB_IT_STATUS1=0x%x\n", tmp);
-	tmp = stv0367_readreg(state, R367CAB_IT_STATUS2);
-	dprintk("R367CAB_IT_STATUS2=0x%x\n", tmp);
-
-	tmp  = stv0367cab_get_derot_freq(state, cab_state->adc_clk);
-	dprintk("stv0367cab_get_derot_freq=0x%x\n", tmp);
-
-	if ((QAM_Lock == 0x0c) || (QAM_Lock == 0x0b)) {
-		/* Wait for FEC lock */
-		LockTime = 0;
-		do {
-			usleep_range(5000, 7000);
-			LockTime += 5;
-			QAMFEC_Lock = stv0367_readbits(state,
-							F367CAB_QAMFEC_LOCK);
-		} while (!QAMFEC_Lock && (LockTime < FECTimeOut));
-	} else
-		QAMFEC_Lock = 0;
-
-	if (QAMFEC_Lock) {
-		signalType = FE_CAB_DATAOK;
-		cab_state->modulation = p->modulation;
-		cab_state->spect_inv = stv0367_readbits(state,
-							F367CAB_QUAD_INV);
-#if 0
-/* not clear for me */
-		if (state->config->if_khz != 0) {
-			if (state->config->if_khz > cab_state->adc_clk / 1000) {
-				cab_state->freq_khz =
-					FE_Cab_TunerGetFrequency(pIntParams->hTuner)
-				- stv0367cab_get_derot_freq(state, cab_state->adc_clk)
-				- cab_state->adc_clk / 1000 + state->config->if_khz;
-			} else {
-				cab_state->freq_khz =
-						FE_Cab_TunerGetFrequency(pIntParams->hTuner)
-						- stv0367cab_get_derot_freq(state, cab_state->adc_clk)
-										+ state->config->if_khz;
-			}
-		} else {
-			cab_state->freq_khz =
-				FE_Cab_TunerGetFrequency(pIntParams->hTuner) +
-				stv0367cab_get_derot_freq(state,
-							cab_state->adc_clk) -
-				cab_state->adc_clk / 4000;
-		}
-#endif
-		cab_state->symbol_rate = stv0367cab_GetSymbolRate(state,
-							cab_state->mclk);
-		cab_state->locked = 1;
-
-		/* stv0367_setbits(state, F367CAB_AGC_ACCUMRSTSEL,7);*/
-	} else {
-		switch (QAM_Lock) {
-		case 1:
-			signalType = FE_CAB_NOAGC;
-			break;
-		case 2:
-			signalType = FE_CAB_NOTIMING;
-			break;
-		case 3:
-			signalType = FE_CAB_TIMINGOK;
-			break;
-		case 4:
-			signalType = FE_CAB_NOCARRIER;
-			break;
-		case 5:
-			signalType = FE_CAB_CARRIEROK;
-			break;
-		case 7:
-			signalType = FE_CAB_NOBLIND;
-			break;
-		case 8:
-			signalType = FE_CAB_BLINDOK;
-			break;
-		case 10:
-			signalType = FE_CAB_NODEMOD;
-			break;
-		case 11:
-			signalType = FE_CAB_DEMODOK;
-			break;
-		case 12:
-			signalType = FE_CAB_DEMODOK;
-			break;
-		case 13:
-			signalType = FE_CAB_NODEMOD;
-			break;
-		case 14:
-			signalType = FE_CAB_NOBLIND;
-			break;
-		case 15:
-			signalType = FE_CAB_NOSIGNAL;
-			break;
-		default:
-			break;
-		}
-
-	}
-
-	/* Set the AGC control values to tracking values */
-	stv0367_writebits(state, F367CAB_AGC_ACCUMRSTSEL, TrackAGCAccum);
-	return signalType;
-}
-
-static int stv0367cab_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct stv0367_state *state = fe->demodulator_priv;
-	struct stv0367cab_state *cab_state = state->cab_state;
-	enum stv0367cab_mod QAMSize = 0;
-
-	dprintk("%s: freq = %d, srate = %d\n", __func__,
-					p->frequency, p->symbol_rate);
-
-	cab_state->derot_offset = 0;
-
-	switch (p->modulation) {
-	case QAM_16:
-		QAMSize = FE_CAB_MOD_QAM16;
-		break;
-	case QAM_32:
-		QAMSize = FE_CAB_MOD_QAM32;
-		break;
-	case QAM_64:
-		QAMSize = FE_CAB_MOD_QAM64;
-		break;
-	case QAM_128:
-		QAMSize = FE_CAB_MOD_QAM128;
-		break;
-	case QAM_256:
-		QAMSize = FE_CAB_MOD_QAM256;
-		break;
-	default:
-		break;
-	}
-
-	stv0367cab_init(fe);
-
-	/* Tuner Frequency Setting */
-	if (fe->ops.tuner_ops.set_params) {
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 1);
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	stv0367cab_SetQamSize(
-			state,
-			p->symbol_rate,
-			QAMSize);
-
-	stv0367cab_set_srate(state,
-			cab_state->adc_clk,
-			cab_state->mclk,
-			p->symbol_rate,
-			QAMSize);
-	/* Search algorithm launch, [-1.1*RangeOffset, +1.1*RangeOffset] scan */
-	cab_state->state = stv0367cab_algo(state, p);
-	return 0;
-}
-
-static int stv0367cab_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct stv0367_state *state = fe->demodulator_priv;
-	struct stv0367cab_state *cab_state = state->cab_state;
-
-	enum stv0367cab_mod QAMSize;
-
-	dprintk("%s:\n", __func__);
-
-	p->symbol_rate = stv0367cab_GetSymbolRate(state, cab_state->mclk);
-
-	QAMSize = stv0367_readbits(state, F367CAB_QAM_MODE);
-	switch (QAMSize) {
-	case FE_CAB_MOD_QAM16:
-		p->modulation = QAM_16;
-		break;
-	case FE_CAB_MOD_QAM32:
-		p->modulation = QAM_32;
-		break;
-	case FE_CAB_MOD_QAM64:
-		p->modulation = QAM_64;
-		break;
-	case FE_CAB_MOD_QAM128:
-		p->modulation = QAM_128;
-		break;
-	case QAM_256:
-		p->modulation = QAM_256;
-		break;
-	default:
-		break;
-	}
-
-	p->frequency = stv0367_get_tuner_freq(fe);
-
-	dprintk("%s: tuner frequency = %d\n", __func__, p->frequency);
-
-	if (state->config->if_khz == 0) {
-		p->frequency +=
-			(stv0367cab_get_derot_freq(state, cab_state->adc_clk) -
-			cab_state->adc_clk / 4000);
-		return 0;
-	}
-
-	if (state->config->if_khz > cab_state->adc_clk / 1000)
-		p->frequency += (state->config->if_khz
-			- stv0367cab_get_derot_freq(state, cab_state->adc_clk)
-			- cab_state->adc_clk / 1000);
-	else
-		p->frequency += (state->config->if_khz
-			- stv0367cab_get_derot_freq(state, cab_state->adc_clk));
-
-	return 0;
-}
-
-#if 0
-void stv0367cab_GetErrorCount(state, enum stv0367cab_mod QAMSize,
-			u32 symbol_rate, FE_367qam_Monitor *Monitor_results)
-{
-	stv0367cab_OptimiseNByteAndGetBER(state, QAMSize, symbol_rate, Monitor_results);
-	stv0367cab_GetPacketsCount(state, Monitor_results);
-
-	return;
-}
-
-static int stv0367cab_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct stv0367_state *state = fe->demodulator_priv;
-
-	return 0;
-}
-#endif
-static s32 stv0367cab_get_rf_lvl(struct stv0367_state *state)
-{
-	s32 rfLevel = 0;
-	s32 RfAgcPwm = 0, IfAgcPwm = 0;
-	u8 i;
-
-	stv0367_writebits(state, F367CAB_STDBY_ADCGP, 0x0);
-
-	RfAgcPwm =
-		(stv0367_readbits(state, F367CAB_RF_AGC1_LEVEL_LO) & 0x03) +
-		(stv0367_readbits(state, F367CAB_RF_AGC1_LEVEL_HI) << 2);
-	RfAgcPwm = 100 * RfAgcPwm / 1023;
-
-	IfAgcPwm =
-		stv0367_readbits(state, F367CAB_AGC_IF_PWMCMD_LO) +
-		(stv0367_readbits(state, F367CAB_AGC_IF_PWMCMD_HI) << 8);
-	if (IfAgcPwm >= 2048)
-		IfAgcPwm -= 2048;
-	else
-		IfAgcPwm += 2048;
-
-	IfAgcPwm = 100 * IfAgcPwm / 4095;
-
-	/* For DTT75467 on NIM */
-	if (RfAgcPwm < 90  && IfAgcPwm < 28) {
-		for (i = 0; i < RF_LOOKUP_TABLE_SIZE; i++) {
-			if (RfAgcPwm <= stv0367cab_RF_LookUp1[0][i]) {
-				rfLevel = (-1) * stv0367cab_RF_LookUp1[1][i];
-				break;
-			}
-		}
-		if (i == RF_LOOKUP_TABLE_SIZE)
-			rfLevel = -56;
-	} else { /*if IF AGC>10*/
-		for (i = 0; i < RF_LOOKUP_TABLE2_SIZE; i++) {
-			if (IfAgcPwm <= stv0367cab_RF_LookUp2[0][i]) {
-				rfLevel = (-1) * stv0367cab_RF_LookUp2[1][i];
-				break;
-			}
-		}
-		if (i == RF_LOOKUP_TABLE2_SIZE)
-			rfLevel = -72;
-	}
-	return rfLevel;
-}
-
-static int stv0367cab_read_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	struct stv0367_state *state = fe->demodulator_priv;
-
-	s32 signal =  stv0367cab_get_rf_lvl(state);
-
-	dprintk("%s: signal=%d dBm\n", __func__, signal);
-
-	if (signal <= -72)
-		*strength = 65535;
-	else
-		*strength = (22 + signal) * (-1311);
-
-	dprintk("%s: strength=%d\n", __func__, (*strength));
-
-	return 0;
-}
-
-static int stv0367cab_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct stv0367_state *state = fe->demodulator_priv;
-	u32 noisepercentage;
-	enum stv0367cab_mod QAMSize;
-	u32 regval = 0, temp = 0;
-	int power, i;
-
-	QAMSize = stv0367_readbits(state, F367CAB_QAM_MODE);
-	switch (QAMSize) {
-	case FE_CAB_MOD_QAM4:
-		power = 21904;
-		break;
-	case FE_CAB_MOD_QAM16:
-		power = 20480;
-		break;
-	case FE_CAB_MOD_QAM32:
-		power = 23040;
-		break;
-	case FE_CAB_MOD_QAM64:
-		power = 21504;
-		break;
-	case FE_CAB_MOD_QAM128:
-		power = 23616;
-		break;
-	case FE_CAB_MOD_QAM256:
-		power = 21760;
-		break;
-	case FE_CAB_MOD_QAM512:
-		power = 1;
-		break;
-	case FE_CAB_MOD_QAM1024:
-		power = 21280;
-		break;
-	default:
-		power = 1;
-		break;
-	}
-
-	for (i = 0; i < 10; i++) {
-		regval += (stv0367_readbits(state, F367CAB_SNR_LO)
-			+ 256 * stv0367_readbits(state, F367CAB_SNR_HI));
-	}
-
-	regval /= 10; /*for average over 10 times in for loop above*/
-	if (regval != 0) {
-		temp = power
-			* (1 << (3 + stv0367_readbits(state, F367CAB_SNR_PER)));
-		temp /= regval;
-	}
-
-	/* table values, not needed to calculate logarithms */
-	if (temp >= 5012)
-		noisepercentage = 100;
-	else if (temp >= 3981)
-		noisepercentage = 93;
-	else if (temp >= 3162)
-		noisepercentage = 86;
-	else if (temp >= 2512)
-		noisepercentage = 79;
-	else if (temp >= 1995)
-		noisepercentage = 72;
-	else if (temp >= 1585)
-		noisepercentage = 65;
-	else if (temp >= 1259)
-		noisepercentage = 58;
-	else if (temp >= 1000)
-		noisepercentage = 50;
-	else if (temp >= 794)
-		noisepercentage = 43;
-	else if (temp >= 501)
-		noisepercentage = 36;
-	else if (temp >= 316)
-		noisepercentage = 29;
-	else if (temp >= 200)
-		noisepercentage = 22;
-	else if (temp >= 158)
-		noisepercentage = 14;
-	else if (temp >= 126)
-		noisepercentage = 7;
-	else
-		noisepercentage = 0;
-
-	dprintk("%s: noisepercentage=%d\n", __func__, noisepercentage);
-
-	*snr = (noisepercentage * 65535) / 100;
-
-	return 0;
-}
-
-static int stv0367cab_read_ucblcks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	struct stv0367_state *state = fe->demodulator_priv;
-	int corrected, tscount;
-
-	*ucblocks = (stv0367_readreg(state, R367CAB_RS_COUNTER_5) << 8)
-			| stv0367_readreg(state, R367CAB_RS_COUNTER_4);
-	corrected = (stv0367_readreg(state, R367CAB_RS_COUNTER_3) << 8)
-			| stv0367_readreg(state, R367CAB_RS_COUNTER_2);
-	tscount = (stv0367_readreg(state, R367CAB_RS_COUNTER_2) << 8)
-			| stv0367_readreg(state, R367CAB_RS_COUNTER_1);
-
-	dprintk("%s: uncorrected blocks=%d corrected blocks=%d tscount=%d\n",
-				__func__, *ucblocks, corrected, tscount);
-
-	return 0;
-};
-
-static struct dvb_frontend_ops stv0367cab_ops = {
-	.delsys = { SYS_DVBC_ANNEX_A },
-	.info = {
-		.name = "ST STV0367 DVB-C",
-		.frequency_min = 47000000,
-		.frequency_max = 862000000,
-		.frequency_stepsize = 62500,
-		.symbol_rate_min = 870000,
-		.symbol_rate_max = 11700000,
-		.caps = 0x400 |/* FE_CAN_QAM_4 */
-			FE_CAN_QAM_16 | FE_CAN_QAM_32  |
-			FE_CAN_QAM_64 | FE_CAN_QAM_128 |
-			FE_CAN_QAM_256 | FE_CAN_FEC_AUTO
-	},
-	.release				= stv0367_release,
-	.init					= stv0367cab_init,
-	.sleep					= stv0367cab_sleep,
-	.i2c_gate_ctrl				= stv0367cab_gate_ctrl,
-	.set_frontend				= stv0367cab_set_frontend,
-	.get_frontend				= stv0367cab_get_frontend,
-	.read_status				= stv0367cab_read_status,
-/*	.read_ber				= stv0367cab_read_ber, */
-	.read_signal_strength			= stv0367cab_read_strength,
-	.read_snr				= stv0367cab_read_snr,
-	.read_ucblocks				= stv0367cab_read_ucblcks,
-	.get_tune_settings			= stv0367_get_tune_settings,
-};
-
-struct dvb_frontend *stv0367cab_attach(const struct stv0367_config *config,
-				   struct i2c_adapter *i2c)
-{
-	struct stv0367_state *state = NULL;
-	struct stv0367cab_state *cab_state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct stv0367_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-	cab_state = kzalloc(sizeof(struct stv0367cab_state), GFP_KERNEL);
-	if (cab_state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->i2c = i2c;
-	state->config = config;
-	cab_state->search_range = 280000;
-	state->cab_state = cab_state;
-	state->fe.ops = stv0367cab_ops;
-	state->fe.demodulator_priv = state;
-	state->chip_id = stv0367_readreg(state, 0xf000);
-
-	dprintk("%s: chip_id = 0x%x\n", __func__, state->chip_id);
-
-	/* check if the demod is there */
-	if ((state->chip_id != 0x50) && (state->chip_id != 0x60))
-		goto error;
-
-	return &state->fe;
-
-error:
-	kfree(cab_state);
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(stv0367cab_attach);
-
-MODULE_PARM_DESC(debug, "Set debug");
-MODULE_PARM_DESC(i2c_debug, "Set i2c debug");
-
-MODULE_AUTHOR("Igor M. Liplianin");
-MODULE_DESCRIPTION("ST STV0367 DVB-C/T demodulator driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/stv0367.h b/drivers/media/dvb/frontends/stv0367.h
deleted file mode 100644
index 93cc4a5..0000000
--- a/drivers/media/dvb/frontends/stv0367.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * stv0367.h
- *
- * Driver for ST STV0367 DVB-T & DVB-C demodulator IC.
- *
- * Copyright (C) ST Microelectronics.
- * Copyright (C) 2010,2011 NetUP Inc.
- * Copyright (C) 2010,2011 Igor M. Liplianin <liplianin@netup.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef STV0367_H
-#define STV0367_H
-
-#include <linux/dvb/frontend.h>
-#include "dvb_frontend.h"
-
-struct stv0367_config {
-	u8 demod_address;
-	u32 xtal;
-	u32 if_khz;/*4500*/
-	int if_iq_mode;
-	int ts_mode;
-	int clk_pol;
-};
-
-#if defined(CONFIG_DVB_STV0367) || (defined(CONFIG_DVB_STV0367_MODULE) \
-							&& defined(MODULE))
-extern struct
-dvb_frontend *stv0367ter_attach(const struct stv0367_config *config,
-					struct i2c_adapter *i2c);
-extern struct
-dvb_frontend *stv0367cab_attach(const struct stv0367_config *config,
-					struct i2c_adapter *i2c);
-#else
-static inline struct
-dvb_frontend *stv0367ter_attach(const struct stv0367_config *config,
-					struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-static inline struct
-dvb_frontend *stv0367cab_attach(const struct stv0367_config *config,
-					struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif
diff --git a/drivers/media/dvb/frontends/stv0367_priv.h b/drivers/media/dvb/frontends/stv0367_priv.h
deleted file mode 100644
index 995db06..0000000
--- a/drivers/media/dvb/frontends/stv0367_priv.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * stv0367_priv.h
- *
- * Driver for ST STV0367 DVB-T & DVB-C demodulator IC.
- *
- * Copyright (C) ST Microelectronics.
- * Copyright (C) 2010,2011 NetUP Inc.
- * Copyright (C) 2010,2011 Igor M. Liplianin <liplianin@netup.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-/* Common driver error constants */
-
-#ifndef STV0367_PRIV_H
-#define STV0367_PRIV_H
-
-#ifndef TRUE
-    #define TRUE (1 == 1)
-#endif
-#ifndef FALSE
-    #define FALSE (!TRUE)
-#endif
-
-#ifndef NULL
-#define NULL 0
-#endif
-
-/* MACRO definitions */
-#define ABS(X) ((X) < 0 ? (-1 * (X)) : (X))
-#define MAX(X, Y) ((X) >= (Y) ? (X) : (Y))
-#define MIN(X, Y) ((X) <= (Y) ? (X) : (Y))
-#define INRANGE(X, Y, Z) \
-	((((X) <= (Y)) && ((Y) <= (Z))) || \
-	(((Z) <= (Y)) && ((Y) <= (X))) ? 1 : 0)
-
-#ifndef MAKEWORD
-#define MAKEWORD(X, Y) (((X) << 8) + (Y))
-#endif
-
-#define LSB(X) (((X) & 0xff))
-#define MSB(Y) (((Y) >> 8) & 0xff)
-#define MMSB(Y)(((Y) >> 16) & 0xff)
-
-enum stv0367_ter_signal_type {
-	FE_TER_NOAGC = 0,
-	FE_TER_AGCOK = 5,
-	FE_TER_NOTPS = 6,
-	FE_TER_TPSOK = 7,
-	FE_TER_NOSYMBOL = 8,
-	FE_TER_BAD_CPQ = 9,
-	FE_TER_PRFOUNDOK = 10,
-	FE_TER_NOPRFOUND = 11,
-	FE_TER_LOCKOK = 12,
-	FE_TER_NOLOCK = 13,
-	FE_TER_SYMBOLOK = 15,
-	FE_TER_CPAMPOK = 16,
-	FE_TER_NOCPAMP = 17,
-	FE_TER_SWNOK = 18
-};
-
-enum stv0367_ts_mode {
-	STV0367_OUTPUTMODE_DEFAULT,
-	STV0367_SERIAL_PUNCT_CLOCK,
-	STV0367_SERIAL_CONT_CLOCK,
-	STV0367_PARALLEL_PUNCT_CLOCK,
-	STV0367_DVBCI_CLOCK
-};
-
-enum stv0367_clk_pol {
-	STV0367_CLOCKPOLARITY_DEFAULT,
-	STV0367_RISINGEDGE_CLOCK,
-	STV0367_FALLINGEDGE_CLOCK
-};
-
-enum stv0367_ter_bw {
-	FE_TER_CHAN_BW_6M = 6,
-	FE_TER_CHAN_BW_7M = 7,
-	FE_TER_CHAN_BW_8M = 8
-};
-
-#if 0
-enum FE_TER_Rate_TPS {
-	FE_TER_TPS_1_2 = 0,
-	FE_TER_TPS_2_3 = 1,
-	FE_TER_TPS_3_4 = 2,
-	FE_TER_TPS_5_6 = 3,
-	FE_TER_TPS_7_8 = 4
-};
-#endif
-
-enum stv0367_ter_mode {
-	FE_TER_MODE_2K,
-	FE_TER_MODE_8K,
-	FE_TER_MODE_4K
-};
-#if 0
-enum FE_TER_Hierarchy_Alpha {
-	FE_TER_HIER_ALPHA_NONE,	/* Regular modulation */
-	FE_TER_HIER_ALPHA_1,	/* Hierarchical modulation a = 1*/
-	FE_TER_HIER_ALPHA_2,	/* Hierarchical modulation a = 2*/
-	FE_TER_HIER_ALPHA_4	/* Hierarchical modulation a = 4*/
-};
-#endif
-enum stv0367_ter_hierarchy {
-	FE_TER_HIER_NONE,	/*Hierarchy None*/
-	FE_TER_HIER_LOW_PRIO,	/*Hierarchy : Low Priority*/
-	FE_TER_HIER_HIGH_PRIO,	/*Hierarchy : High Priority*/
-	FE_TER_HIER_PRIO_ANY	/*Hierarchy  :Any*/
-};
-
-#if 0
-enum fe_stv0367_ter_spec {
-	FE_TER_INVERSION_NONE = 0,
-	FE_TER_INVERSION = 1,
-	FE_TER_INVERSION_AUTO = 2,
-	FE_TER_INVERSION_UNK  = 4
-};
-#endif
-
-enum stv0367_ter_if_iq_mode {
-	FE_TER_NORMAL_IF_TUNER = 0,
-	FE_TER_LONGPATH_IF_TUNER = 1,
-	FE_TER_IQ_TUNER = 2
-
-};
-
-#if 0
-enum FE_TER_FECRate {
-	FE_TER_FEC_NONE = 0x00,	/* no FEC rate specified */
-	FE_TER_FEC_ALL = 0xFF,	 /* Logical OR of all FECs */
-	FE_TER_FEC_1_2 = 1,
-	FE_TER_FEC_2_3 = (1 << 1),
-	FE_TER_FEC_3_4 = (1 << 2),
-	FE_TER_FEC_4_5 = (1 << 3),
-	FE_TER_FEC_5_6 = (1 << 4),
-	FE_TER_FEC_6_7 = (1 << 5),
-	FE_TER_FEC_7_8 = (1 << 6),
-	FE_TER_FEC_8_9 = (1 << 7)
-};
-
-enum FE_TER_Rate {
-	FE_TER_FE_1_2 = 0,
-	FE_TER_FE_2_3 = 1,
-	FE_TER_FE_3_4 = 2,
-	FE_TER_FE_5_6 = 3,
-	FE_TER_FE_6_7 = 4,
-	FE_TER_FE_7_8 = 5
-};
-#endif
-
-enum stv0367_ter_force {
-	FE_TER_FORCENONE = 0,
-	FE_TER_FORCE_M_G = 1
-};
-
-enum  stv0367cab_mod {
-	FE_CAB_MOD_QAM4,
-	FE_CAB_MOD_QAM16,
-	FE_CAB_MOD_QAM32,
-	FE_CAB_MOD_QAM64,
-	FE_CAB_MOD_QAM128,
-	FE_CAB_MOD_QAM256,
-	FE_CAB_MOD_QAM512,
-	FE_CAB_MOD_QAM1024
-};
-#if 0
-enum {
-	FE_CAB_FEC_A = 1,	/* J83 Annex A */
-	FE_CAB_FEC_B = (1 << 1),/* J83 Annex B */
-	FE_CAB_FEC_C = (1 << 2)	/* J83 Annex C */
-} FE_CAB_FECType_t;
-#endif
-struct stv0367_cab_signal_info {
-	int locked;
-	u32 frequency; /* kHz */
-	u32 symbol_rate; /* Mbds */
-	enum stv0367cab_mod modulation;
-	fe_spectral_inversion_t spect_inv;
-	s32 Power_dBmx10;	/* Power of the RF signal (dBm x 10) */
-	u32	CN_dBx10;	/* Carrier to noise ratio (dB x 10) */
-	u32	BER;		/* Bit error rate (x 10000000)	*/
-};
-
-enum stv0367_cab_signal_type {
-	FE_CAB_NOTUNER,
-	FE_CAB_NOAGC,
-	FE_CAB_NOSIGNAL,
-	FE_CAB_NOTIMING,
-	FE_CAB_TIMINGOK,
-	FE_CAB_NOCARRIER,
-	FE_CAB_CARRIEROK,
-	FE_CAB_NOBLIND,
-	FE_CAB_BLINDOK,
-	FE_CAB_NODEMOD,
-	FE_CAB_DEMODOK,
-	FE_CAB_DATAOK
-};
-
-#endif
diff --git a/drivers/media/dvb/frontends/stv0367_regs.h b/drivers/media/dvb/frontends/stv0367_regs.h
deleted file mode 100644
index a96fbdc..0000000
--- a/drivers/media/dvb/frontends/stv0367_regs.h
+++ /dev/null
@@ -1,3614 +0,0 @@
-/*
- * stv0367_regs.h
- *
- * Driver for ST STV0367 DVB-T & DVB-C demodulator IC.
- *
- * Copyright (C) ST Microelectronics.
- * Copyright (C) 2010,2011 NetUP Inc.
- * Copyright (C) 2010,2011 Igor M. Liplianin <liplianin@netup.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef STV0367_REGS_H
-#define STV0367_REGS_H
-
-/* ID */
-#define	R367TER_ID	0xf000
-#define	F367TER_IDENTIFICATIONREG	0xf00000ff
-
-/* I2CRPT */
-#define	R367TER_I2CRPT	0xf001
-#define	F367TER_I2CT_ON	0xf0010080
-#define	F367TER_ENARPT_LEVEL	0xf0010070
-#define	F367TER_SCLT_DELAY	0xf0010008
-#define	F367TER_SCLT_NOD	0xf0010004
-#define	F367TER_STOP_ENABLE	0xf0010002
-#define	F367TER_SDAT_NOD	0xf0010001
-
-/* TOPCTRL */
-#define	R367TER_TOPCTRL	0xf002
-#define	F367TER_STDBY	0xf0020080
-#define	F367TER_STDBY_FEC	0xf0020040
-#define	F367TER_STDBY_CORE	0xf0020020
-#define	F367TER_QAM_COFDM	0xf0020010
-#define	F367TER_TS_DIS	0xf0020008
-#define	F367TER_DIR_CLK_216	0xf0020004
-#define	F367TER_TUNER_BB	0xf0020002
-#define	F367TER_DVBT_H	0xf0020001
-
-/* IOCFG0 */
-#define	R367TER_IOCFG0	0xf003
-#define	F367TER_OP0_SD	0xf0030080
-#define	F367TER_OP0_VAL	0xf0030040
-#define	F367TER_OP0_OD	0xf0030020
-#define	F367TER_OP0_INV	0xf0030010
-#define	F367TER_OP0_DACVALUE_HI	0xf003000f
-
-/* DAc0R */
-#define	R367TER_DAC0R	0xf004
-#define	F367TER_OP0_DACVALUE_LO	0xf00400ff
-
-/* IOCFG1 */
-#define	R367TER_IOCFG1	0xf005
-#define	F367TER_IP0	0xf0050040
-#define	F367TER_OP1_OD	0xf0050020
-#define	F367TER_OP1_INV	0xf0050010
-#define	F367TER_OP1_DACVALUE_HI	0xf005000f
-
-/* DAC1R */
-#define	R367TER_DAC1R	0xf006
-#define	F367TER_OP1_DACVALUE_LO	0xf00600ff
-
-/* IOCFG2 */
-#define	R367TER_IOCFG2	0xf007
-#define	F367TER_OP2_LOCK_CONF	0xf00700e0
-#define	F367TER_OP2_OD	0xf0070010
-#define	F367TER_OP2_VAL	0xf0070008
-#define	F367TER_OP1_LOCK_CONF	0xf0070007
-
-/* SDFR */
-#define	R367TER_SDFR	0xf008
-#define	F367TER_OP0_FREQ	0xf00800f0
-#define	F367TER_OP1_FREQ	0xf008000f
-
-/* STATUS */
-#define	R367TER_STATUS	0xf009
-#define	F367TER_TPS_LOCK	0xf0090080
-#define	F367TER_SYR_LOCK	0xf0090040
-#define	F367TER_AGC_LOCK	0xf0090020
-#define	F367TER_PRF	0xf0090010
-#define	F367TER_LK	0xf0090008
-#define	F367TER_PR	0xf0090007
-
-/* AUX_CLK */
-#define	R367TER_AUX_CLK	0xf00a
-#define	F367TER_AUXFEC_CTL	0xf00a00c0
-#define	F367TER_DIS_CKX4	0xf00a0020
-#define	F367TER_CKSEL	0xf00a0018
-#define	F367TER_CKDIV_PROG	0xf00a0006
-#define	F367TER_AUXCLK_ENA	0xf00a0001
-
-/* FREESYS1 */
-#define	R367TER_FREESYS1	0xf00b
-#define	F367TER_FREE_SYS1	0xf00b00ff
-
-/* FREESYS2 */
-#define	R367TER_FREESYS2	0xf00c
-#define	F367TER_FREE_SYS2	0xf00c00ff
-
-/* FREESYS3 */
-#define	R367TER_FREESYS3	0xf00d
-#define	F367TER_FREE_SYS3	0xf00d00ff
-
-/* GPIO_CFG */
-#define	R367TER_GPIO_CFG	0xf00e
-#define	F367TER_GPIO7_NOD	0xf00e0080
-#define	F367TER_GPIO7_CFG	0xf00e0040
-#define	F367TER_GPIO6_NOD	0xf00e0020
-#define	F367TER_GPIO6_CFG	0xf00e0010
-#define	F367TER_GPIO5_NOD	0xf00e0008
-#define	F367TER_GPIO5_CFG	0xf00e0004
-#define	F367TER_GPIO4_NOD	0xf00e0002
-#define	F367TER_GPIO4_CFG	0xf00e0001
-
-/* GPIO_CMD */
-#define	R367TER_GPIO_CMD	0xf00f
-#define	F367TER_GPIO7_VAL	0xf00f0008
-#define	F367TER_GPIO6_VAL	0xf00f0004
-#define	F367TER_GPIO5_VAL	0xf00f0002
-#define	F367TER_GPIO4_VAL	0xf00f0001
-
-/* AGC2MAX */
-#define	R367TER_AGC2MAX	0xf010
-#define	F367TER_AGC2_MAX	0xf01000ff
-
-/* AGC2MIN */
-#define	R367TER_AGC2MIN	0xf011
-#define	F367TER_AGC2_MIN	0xf01100ff
-
-/* AGC1MAX */
-#define	R367TER_AGC1MAX	0xf012
-#define	F367TER_AGC1_MAX	0xf01200ff
-
-/* AGC1MIN */
-#define	R367TER_AGC1MIN	0xf013
-#define	F367TER_AGC1_MIN	0xf01300ff
-
-/* AGCR */
-#define	R367TER_AGCR	0xf014
-#define	F367TER_RATIO_A	0xf01400e0
-#define	F367TER_RATIO_B	0xf0140018
-#define	F367TER_RATIO_C	0xf0140007
-
-/* AGC2TH */
-#define	R367TER_AGC2TH	0xf015
-#define	F367TER_AGC2_THRES	0xf01500ff
-
-/* AGC12c */
-#define	R367TER_AGC12C	0xf016
-#define	F367TER_AGC1_IV	0xf0160080
-#define	F367TER_AGC1_OD	0xf0160040
-#define	F367TER_AGC1_LOAD	0xf0160020
-#define	F367TER_AGC2_IV	0xf0160010
-#define	F367TER_AGC2_OD	0xf0160008
-#define	F367TER_AGC2_LOAD	0xf0160004
-#define	F367TER_AGC12_MODE	0xf0160003
-
-/* AGCCTRL1 */
-#define	R367TER_AGCCTRL1	0xf017
-#define	F367TER_DAGC_ON	0xf0170080
-#define	F367TER_INVERT_AGC12	0xf0170040
-#define	F367TER_AGC1_MODE	0xf0170008
-#define	F367TER_AGC2_MODE	0xf0170007
-
-/* AGCCTRL2 */
-#define	R367TER_AGCCTRL2	0xf018
-#define	F367TER_FRZ2_CTRL	0xf0180060
-#define	F367TER_FRZ1_CTRL	0xf0180018
-#define	F367TER_TIME_CST	0xf0180007
-
-/* AGC1VAL1 */
-#define	R367TER_AGC1VAL1	0xf019
-#define	F367TER_AGC1_VAL_LO	0xf01900ff
-
-/* AGC1VAL2 */
-#define	R367TER_AGC1VAL2	0xf01a
-#define	F367TER_AGC1_VAL_HI	0xf01a000f
-
-/* AGC2VAL1 */
-#define	R367TER_AGC2VAL1	0xf01b
-#define	F367TER_AGC2_VAL_LO	0xf01b00ff
-
-/* AGC2VAL2 */
-#define	R367TER_AGC2VAL2	0xf01c
-#define	F367TER_AGC2_VAL_HI	0xf01c000f
-
-/* AGC2PGA */
-#define	R367TER_AGC2PGA	0xf01d
-#define	F367TER_AGC2_PGA	0xf01d00ff
-
-/* OVF_RATE1 */
-#define	R367TER_OVF_RATE1	0xf01e
-#define	F367TER_OVF_RATE_HI	0xf01e000f
-
-/* OVF_RATE2 */
-#define	R367TER_OVF_RATE2	0xf01f
-#define	F367TER_OVF_RATE_LO	0xf01f00ff
-
-/* GAIN_SRC1 */
-#define	R367TER_GAIN_SRC1	0xf020
-#define	F367TER_INV_SPECTR	0xf0200080
-#define	F367TER_IQ_INVERT	0xf0200040
-#define	F367TER_INR_BYPASS	0xf0200020
-#define	F367TER_STATUS_INV_SPECRUM	0xf0200010
-#define	F367TER_GAIN_SRC_HI	0xf020000f
-
-/* GAIN_SRC2 */
-#define	R367TER_GAIN_SRC2	0xf021
-#define	F367TER_GAIN_SRC_LO	0xf02100ff
-
-/* INC_DEROT1 */
-#define	R367TER_INC_DEROT1	0xf022
-#define	F367TER_INC_DEROT_HI	0xf02200ff
-
-/* INC_DEROT2 */
-#define	R367TER_INC_DEROT2	0xf023
-#define	F367TER_INC_DEROT_LO	0xf02300ff
-
-/* PPM_CPAMP_DIR */
-#define	R367TER_PPM_CPAMP_DIR	0xf024
-#define	F367TER_PPM_CPAMP_DIRECT	0xf02400ff
-
-/* PPM_CPAMP_INV */
-#define	R367TER_PPM_CPAMP_INV	0xf025
-#define	F367TER_PPM_CPAMP_INVER	0xf02500ff
-
-/* FREESTFE_1 */
-#define	R367TER_FREESTFE_1	0xf026
-#define	F367TER_SYMBOL_NUMBER_INC	0xf02600c0
-#define	F367TER_SEL_LSB	0xf0260004
-#define	F367TER_AVERAGE_ON	0xf0260002
-#define	F367TER_DC_ADJ	0xf0260001
-
-/* FREESTFE_2 */
-#define	R367TER_FREESTFE_2	0xf027
-#define	F367TER_SEL_SRCOUT	0xf02700c0
-#define	F367TER_SEL_SYRTHR	0xf027001f
-
-/* DCOFFSET */
-#define	R367TER_DCOFFSET	0xf028
-#define	F367TER_SELECT_I_Q	0xf0280080
-#define	F367TER_DC_OFFSET	0xf028007f
-
-/* EN_PROCESS */
-#define	R367TER_EN_PROCESS	0xf029
-#define	F367TER_FREE	0xf02900f0
-#define	F367TER_ENAB_MANUAL	0xf0290001
-
-/* SDI_SMOOTHER */
-#define	R367TER_SDI_SMOOTHER	0xf02a
-#define	F367TER_DIS_SMOOTH	0xf02a0080
-#define	F367TER_SDI_INC_SMOOTHER	0xf02a007f
-
-/* FE_LOOP_OPEN */
-#define	R367TER_FE_LOOP_OPEN	0xf02b
-#define	F367TER_TRL_LOOP_OP	0xf02b0002
-#define	F367TER_CRL_LOOP_OP	0xf02b0001
-
-/* FREQOFF1 */
-#define	R367TER_FREQOFF1	0xf02c
-#define	F367TER_FREQ_OFFSET_LOOP_OPEN_VHI	0xf02c00ff
-
-/* FREQOFF2 */
-#define	R367TER_FREQOFF2	0xf02d
-#define	F367TER_FREQ_OFFSET_LOOP_OPEN_HI	0xf02d00ff
-
-/* FREQOFF3 */
-#define	R367TER_FREQOFF3	0xf02e
-#define	F367TER_FREQ_OFFSET_LOOP_OPEN_LO	0xf02e00ff
-
-/* TIMOFF1 */
-#define	R367TER_TIMOFF1	0xf02f
-#define	F367TER_TIM_OFFSET_LOOP_OPEN_HI	0xf02f00ff
-
-/* TIMOFF2 */
-#define	R367TER_TIMOFF2	0xf030
-#define	F367TER_TIM_OFFSET_LOOP_OPEN_LO	0xf03000ff
-
-/* EPQ */
-#define	R367TER_EPQ	0xf031
-#define	F367TER_EPQ1	0xf03100ff
-
-/* EPQAUTO */
-#define	R367TER_EPQAUTO	0xf032
-#define	F367TER_EPQ2	0xf03200ff
-
-/* SYR_UPDATE */
-#define	R367TER_SYR_UPDATE	0xf033
-#define	F367TER_SYR_PROTV	0xf0330080
-#define	F367TER_SYR_PROTV_GAIN	0xf0330060
-#define	F367TER_SYR_FILTER	0xf0330010
-#define	F367TER_SYR_TRACK_THRES	0xf033000c
-
-/* CHPFREE */
-#define	R367TER_CHPFREE	0xf034
-#define	F367TER_CHP_FREE	0xf03400ff
-
-/* PPM_STATE_MAC */
-#define	R367TER_PPM_STATE_MAC	0xf035
-#define	F367TER_PPM_STATE_MACHINE_DECODER	0xf035003f
-
-/* INR_THRESHOLD */
-#define	R367TER_INR_THRESHOLD	0xf036
-#define	F367TER_INR_THRESH	0xf03600ff
-
-/* EPQ_TPS_ID_CELL */
-#define	R367TER_EPQ_TPS_ID_CELL	0xf037
-#define	F367TER_ENABLE_LGTH_TO_CF	0xf0370080
-#define	F367TER_DIS_TPS_RSVD	0xf0370040
-#define	F367TER_DIS_BCH	0xf0370020
-#define	F367TER_DIS_ID_CEL	0xf0370010
-#define	F367TER_TPS_ADJUST_SYM	0xf037000f
-
-/* EPQ_CFG */
-#define	R367TER_EPQ_CFG	0xf038
-#define	F367TER_EPQ_RANGE	0xf0380002
-#define	F367TER_EPQ_SOFT	0xf0380001
-
-/* EPQ_STATUS */
-#define	R367TER_EPQ_STATUS	0xf039
-#define	F367TER_SLOPE_INC	0xf03900fc
-#define	F367TER_TPS_FIELD	0xf0390003
-
-/* AUTORELOCK */
-#define	R367TER_AUTORELOCK	0xf03a
-#define	F367TER_BYPASS_BER_TEMPO	0xf03a0080
-#define	F367TER_BER_TEMPO	0xf03a0070
-#define	F367TER_BYPASS_COFDM_TEMPO	0xf03a0008
-#define	F367TER_COFDM_TEMPO	0xf03a0007
-
-/* BER_THR_VMSB */
-#define	R367TER_BER_THR_VMSB	0xf03b
-#define	F367TER_BER_THRESHOLD_HI	0xf03b00ff
-
-/* BER_THR_MSB */
-#define	R367TER_BER_THR_MSB	0xf03c
-#define	F367TER_BER_THRESHOLD_MID	0xf03c00ff
-
-/* BER_THR_LSB */
-#define	R367TER_BER_THR_LSB	0xf03d
-#define	F367TER_BER_THRESHOLD_LO	0xf03d00ff
-
-/* CCD */
-#define	R367TER_CCD	0xf03e
-#define	F367TER_CCD_DETECTED	0xf03e0080
-#define	F367TER_CCD_RESET	0xf03e0040
-#define	F367TER_CCD_THRESHOLD	0xf03e000f
-
-/* SPECTR_CFG */
-#define	R367TER_SPECTR_CFG	0xf03f
-#define	F367TER_SPECT_CFG	0xf03f0003
-
-/* CONSTMU_MSB */
-#define	R367TER_CONSTMU_MSB	0xf040
-#define	F367TER_CONSTMU_FREEZE	0xf0400080
-#define	F367TER_CONSTNU_FORCE_EN	0xf0400040
-#define	F367TER_CONST_MU_MSB	0xf040003f
-
-/* CONSTMU_LSB */
-#define	R367TER_CONSTMU_LSB	0xf041
-#define	F367TER_CONST_MU_LSB	0xf04100ff
-
-/* CONSTMU_MAX_MSB */
-#define	R367TER_CONSTMU_MAX_MSB	0xf042
-#define	F367TER_CONST_MU_MAX_MSB	0xf042003f
-
-/* CONSTMU_MAX_LSB */
-#define	R367TER_CONSTMU_MAX_LSB	0xf043
-#define	F367TER_CONST_MU_MAX_LSB	0xf04300ff
-
-/* ALPHANOISE */
-#define	R367TER_ALPHANOISE	0xf044
-#define	F367TER_USE_ALLFILTER	0xf0440080
-#define	F367TER_INTER_ON	0xf0440040
-#define	F367TER_ALPHA_NOISE	0xf044001f
-
-/* MAXGP_MSB */
-#define	R367TER_MAXGP_MSB	0xf045
-#define	F367TER_MUFILTER_LENGTH	0xf04500f0
-#define	F367TER_MAX_GP_MSB	0xf045000f
-
-/* MAXGP_LSB */
-#define	R367TER_MAXGP_LSB	0xf046
-#define	F367TER_MAX_GP_LSB	0xf04600ff
-
-/* ALPHAMSB */
-#define	R367TER_ALPHAMSB	0xf047
-#define	F367TER_CHC_DATARATE	0xf04700c0
-#define	F367TER_ALPHA_MSB	0xf047003f
-
-/* ALPHALSB */
-#define	R367TER_ALPHALSB	0xf048
-#define	F367TER_ALPHA_LSB	0xf04800ff
-
-/* PILOT_ACCU */
-#define	R367TER_PILOT_ACCU	0xf049
-#define	F367TER_USE_SCAT4ADDAPT	0xf0490080
-#define	F367TER_PILOT_ACC	0xf049001f
-
-/* PILOTMU_ACCU */
-#define	R367TER_PILOTMU_ACCU	0xf04a
-#define	F367TER_DISCARD_BAD_SP	0xf04a0080
-#define	F367TER_DISCARD_BAD_CP	0xf04a0040
-#define	F367TER_PILOT_MU_ACCU	0xf04a001f
-
-/* FILT_CHANNEL_EST */
-#define	R367TER_FILT_CHANNEL_EST	0xf04b
-#define	F367TER_USE_FILT_PILOT	0xf04b0080
-#define	F367TER_FILT_CHANNEL	0xf04b007f
-
-/* ALPHA_NOPISE_FREQ */
-#define	R367TER_ALPHA_NOPISE_FREQ	0xf04c
-#define	F367TER_NOISE_FREQ_FILT	0xf04c0040
-#define	F367TER_ALPHA_NOISE_FREQ	0xf04c003f
-
-/* RATIO_PILOT */
-#define	R367TER_RATIO_PILOT	0xf04d
-#define	F367TER_RATIO_MEAN_SP	0xf04d00f0
-#define	F367TER_RATIO_MEAN_CP	0xf04d000f
-
-/* CHC_CTL */
-#define	R367TER_CHC_CTL	0xf04e
-#define	F367TER_TRACK_EN	0xf04e0080
-#define	F367TER_NOISE_NORM_EN	0xf04e0040
-#define	F367TER_FORCE_CHC_RESET	0xf04e0020
-#define	F367TER_SHORT_TIME	0xf04e0010
-#define	F367TER_FORCE_STATE_EN	0xf04e0008
-#define	F367TER_FORCE_STATE	0xf04e0007
-
-/* EPQ_ADJUST */
-#define	R367TER_EPQ_ADJUST	0xf04f
-#define	F367TER_ADJUST_SCAT_IND	0xf04f00c0
-#define	F367TER_ONE_SYMBOL	0xf04f0010
-#define	F367TER_EPQ_DECAY	0xf04f000e
-#define	F367TER_HOLD_SLOPE	0xf04f0001
-
-/* EPQ_THRES */
-#define	R367TER_EPQ_THRES	0xf050
-#define	F367TER_EPQ_THR	0xf05000ff
-
-/* OMEGA_CTL */
-#define	R367TER_OMEGA_CTL	0xf051
-#define	F367TER_OMEGA_RST	0xf0510080
-#define	F367TER_FREEZE_OMEGA	0xf0510040
-#define	F367TER_OMEGA_SEL	0xf051003f
-
-/* GP_CTL */
-#define	R367TER_GP_CTL	0xf052
-#define	F367TER_CHC_STATE	0xf05200e0
-#define	F367TER_FREEZE_GP	0xf0520010
-#define	F367TER_GP_SEL	0xf052000f
-
-/* MUMSB */
-#define	R367TER_MUMSB	0xf053
-#define	F367TER_MU_MSB	0xf053007f
-
-/* MULSB */
-#define	R367TER_MULSB	0xf054
-#define	F367TER_MU_LSB	0xf05400ff
-
-/* GPMSB */
-#define	R367TER_GPMSB	0xf055
-#define	F367TER_CSI_THRESHOLD	0xf05500e0
-#define	F367TER_GP_MSB	0xf055000f
-
-/* GPLSB */
-#define	R367TER_GPLSB	0xf056
-#define	F367TER_GP_LSB	0xf05600ff
-
-/* OMEGAMSB */
-#define	R367TER_OMEGAMSB	0xf057
-#define	F367TER_OMEGA_MSB	0xf057007f
-
-/* OMEGALSB */
-#define	R367TER_OMEGALSB	0xf058
-#define	F367TER_OMEGA_LSB	0xf05800ff
-
-/* SCAT_NB */
-#define	R367TER_SCAT_NB	0xf059
-#define	F367TER_CHC_TEST	0xf05900f8
-#define	F367TER_SCAT_NUMB	0xf0590003
-
-/* CHC_DUMMY */
-#define	R367TER_CHC_DUMMY	0xf05a
-#define	F367TER_CHC_DUM	0xf05a00ff
-
-/* INC_CTL */
-#define	R367TER_INC_CTL	0xf05b
-#define	F367TER_INC_BYPASS	0xf05b0080
-#define	F367TER_INC_NDEPTH	0xf05b000c
-#define	F367TER_INC_MADEPTH	0xf05b0003
-
-/* INCTHRES_COR1 */
-#define	R367TER_INCTHRES_COR1	0xf05c
-#define	F367TER_INC_THRES_COR1	0xf05c00ff
-
-/* INCTHRES_COR2 */
-#define	R367TER_INCTHRES_COR2	0xf05d
-#define	F367TER_INC_THRES_COR2	0xf05d00ff
-
-/* INCTHRES_DET1 */
-#define	R367TER_INCTHRES_DET1	0xf05e
-#define	F367TER_INC_THRES_DET1	0xf05e003f
-
-/* INCTHRES_DET2 */
-#define	R367TER_INCTHRES_DET2	0xf05f
-#define	F367TER_INC_THRES_DET2	0xf05f003f
-
-/* IIR_CELLNB */
-#define	R367TER_IIR_CELLNB	0xf060
-#define	F367TER_NRST_IIR	0xf0600080
-#define	F367TER_IIR_CELL_NB	0xf0600007
-
-/* IIRCX_COEFF1_MSB */
-#define	R367TER_IIRCX_COEFF1_MSB	0xf061
-#define	F367TER_IIR_CX_COEFF1_MSB	0xf06100ff
-
-/* IIRCX_COEFF1_LSB */
-#define	R367TER_IIRCX_COEFF1_LSB	0xf062
-#define	F367TER_IIR_CX_COEFF1_LSB	0xf06200ff
-
-/* IIRCX_COEFF2_MSB */
-#define	R367TER_IIRCX_COEFF2_MSB	0xf063
-#define	F367TER_IIR_CX_COEFF2_MSB	0xf06300ff
-
-/* IIRCX_COEFF2_LSB */
-#define	R367TER_IIRCX_COEFF2_LSB	0xf064
-#define	F367TER_IIR_CX_COEFF2_LSB	0xf06400ff
-
-/* IIRCX_COEFF3_MSB */
-#define	R367TER_IIRCX_COEFF3_MSB	0xf065
-#define	F367TER_IIR_CX_COEFF3_MSB	0xf06500ff
-
-/* IIRCX_COEFF3_LSB */
-#define	R367TER_IIRCX_COEFF3_LSB	0xf066
-#define	F367TER_IIR_CX_COEFF3_LSB	0xf06600ff
-
-/* IIRCX_COEFF4_MSB */
-#define	R367TER_IIRCX_COEFF4_MSB	0xf067
-#define	F367TER_IIR_CX_COEFF4_MSB	0xf06700ff
-
-/* IIRCX_COEFF4_LSB */
-#define	R367TER_IIRCX_COEFF4_LSB	0xf068
-#define	F367TER_IIR_CX_COEFF4_LSB	0xf06800ff
-
-/* IIRCX_COEFF5_MSB */
-#define	R367TER_IIRCX_COEFF5_MSB	0xf069
-#define	F367TER_IIR_CX_COEFF5_MSB	0xf06900ff
-
-/* IIRCX_COEFF5_LSB */
-#define	R367TER_IIRCX_COEFF5_LSB	0xf06a
-#define	F367TER_IIR_CX_COEFF5_LSB	0xf06a00ff
-
-/* FEPATH_CFG */
-#define	R367TER_FEPATH_CFG	0xf06b
-#define	F367TER_DEMUX_SWAP	0xf06b0004
-#define	F367TER_DIGAGC_SWAP	0xf06b0002
-#define	F367TER_LONGPATH_IF	0xf06b0001
-
-/* PMC1_FUNC */
-#define	R367TER_PMC1_FUNC	0xf06c
-#define	F367TER_SOFT_RSTN	0xf06c0080
-#define	F367TER_PMC1_AVERAGE_TIME	0xf06c0078
-#define	F367TER_PMC1_WAIT_TIME	0xf06c0006
-#define	F367TER_PMC1_2N_SEL	0xf06c0001
-
-/* PMC1_FOR */
-#define	R367TER_PMC1_FOR	0xf06d
-#define	F367TER_PMC1_FORCE	0xf06d0080
-#define	F367TER_PMC1_FORCE_VALUE	0xf06d007c
-
-/* PMC2_FUNC */
-#define	R367TER_PMC2_FUNC	0xf06e
-#define	F367TER_PMC2_SOFT_STN	0xf06e0080
-#define	F367TER_PMC2_ACCU_TIME	0xf06e0070
-#define	F367TER_PMC2_CMDP_MN	0xf06e0008
-#define	F367TER_PMC2_SWAP	0xf06e0004
-
-/* STATUS_ERR_DA */
-#define	R367TER_STATUS_ERR_DA	0xf06f
-#define	F367TER_COM_USEGAINTRK	0xf06f0080
-#define	F367TER_COM_AGCLOCK	0xf06f0040
-#define	F367TER_AUT_AGCLOCK	0xf06f0020
-#define	F367TER_MIN_ERR_X_LSB	0xf06f000f
-
-/* DIG_AGC_R */
-#define	R367TER_DIG_AGC_R	0xf070
-#define	F367TER_COM_SOFT_RSTN	0xf0700080
-#define	F367TER_COM_AGC_ON	0xf0700040
-#define	F367TER_COM_EARLY	0xf0700020
-#define	F367TER_AUT_SOFT_RESETN	0xf0700010
-#define	F367TER_AUT_AGC_ON	0xf0700008
-#define	F367TER_AUT_EARLY	0xf0700004
-#define	F367TER_AUT_ROT_EN	0xf0700002
-#define	F367TER_LOCK_SOFT_RESETN	0xf0700001
-
-/* COMAGC_TARMSB */
-#define	R367TER_COMAGC_TARMSB	0xf071
-#define	F367TER_COM_AGC_TARGET_MSB	0xf07100ff
-
-/* COM_AGC_TAR_ENMODE */
-#define	R367TER_COM_AGC_TAR_ENMODE	0xf072
-#define	F367TER_COM_AGC_TARGET_LSB	0xf07200f0
-#define	F367TER_COM_ENMODE	0xf072000f
-
-/* COM_AGC_CFG */
-#define	R367TER_COM_AGC_CFG	0xf073
-#define	F367TER_COM_N	0xf07300f8
-#define	F367TER_COM_STABMODE	0xf0730006
-#define	F367TER_ERR_SEL	0xf0730001
-
-/* COM_AGC_GAIN1 */
-#define	R367TER_COM_AGC_GAIN1	0xf074
-#define	F367TER_COM_GAIN1aCK	0xf07400f0
-#define	F367TER_COM_GAIN1TRK	0xf074000f
-
-/* AUT_AGC_TARGETMSB */
-#define	R367TER_AUT_AGC_TARGETMSB	0xf075
-#define	F367TER_AUT_AGC_TARGET_MSB	0xf07500ff
-
-/* LOCK_DET_MSB */
-#define	R367TER_LOCK_DET_MSB	0xf076
-#define	F367TER_LOCK_DETECT_MSB	0xf07600ff
-
-/* AGCTAR_LOCK_LSBS */
-#define	R367TER_AGCTAR_LOCK_LSBS	0xf077
-#define	F367TER_AUT_AGC_TARGET_LSB	0xf07700f0
-#define	F367TER_LOCK_DETECT_LSB	0xf077000f
-
-/* AUT_GAIN_EN */
-#define	R367TER_AUT_GAIN_EN	0xf078
-#define	F367TER_AUT_ENMODE	0xf07800f0
-#define	F367TER_AUT_GAIN2	0xf078000f
-
-/* AUT_CFG */
-#define	R367TER_AUT_CFG	0xf079
-#define	F367TER_AUT_N	0xf07900f8
-#define	F367TER_INT_CHOICE	0xf0790006
-#define	F367TER_INT_LOAD	0xf0790001
-
-/* LOCKN */
-#define	R367TER_LOCKN	0xf07a
-#define	F367TER_LOCK_N	0xf07a00f8
-#define	F367TER_SEL_IQNTAR	0xf07a0004
-#define	F367TER_LOCK_DETECT_CHOICE	0xf07a0003
-
-/* INT_X_3 */
-#define	R367TER_INT_X_3	0xf07b
-#define	F367TER_INT_X3	0xf07b00ff
-
-/* INT_X_2 */
-#define	R367TER_INT_X_2	0xf07c
-#define	F367TER_INT_X2	0xf07c00ff
-
-/* INT_X_1 */
-#define	R367TER_INT_X_1	0xf07d
-#define	F367TER_INT_X1	0xf07d00ff
-
-/* INT_X_0 */
-#define	R367TER_INT_X_0	0xf07e
-#define	F367TER_INT_X0	0xf07e00ff
-
-/* MIN_ERRX_MSB */
-#define	R367TER_MIN_ERRX_MSB	0xf07f
-#define	F367TER_MIN_ERR_X_MSB	0xf07f00ff
-
-/* COR_CTL */
-#define	R367TER_COR_CTL	0xf080
-#define	F367TER_CORE_ACTIVE	0xf0800020
-#define	F367TER_HOLD	0xf0800010
-#define	F367TER_CORE_STATE_CTL	0xf080000f
-
-/* COR_STAT */
-#define	R367TER_COR_STAT	0xf081
-#define	F367TER_SCATT_LOCKED	0xf0810080
-#define	F367TER_TPS_LOCKED	0xf0810040
-#define	F367TER_SYR_LOCKED_COR	0xf0810020
-#define	F367TER_AGC_LOCKED_STAT	0xf0810010
-#define	F367TER_CORE_STATE_STAT	0xf081000f
-
-/* COR_INTEN */
-#define	R367TER_COR_INTEN	0xf082
-#define	F367TER_INTEN	0xf0820080
-#define	F367TER_INTEN_SYR	0xf0820020
-#define	F367TER_INTEN_FFT	0xf0820010
-#define	F367TER_INTEN_AGC	0xf0820008
-#define	F367TER_INTEN_TPS1	0xf0820004
-#define	F367TER_INTEN_TPS2	0xf0820002
-#define	F367TER_INTEN_TPS3	0xf0820001
-
-/* COR_INTSTAT */
-#define	R367TER_COR_INTSTAT	0xf083
-#define	F367TER_INTSTAT_SYR	0xf0830020
-#define	F367TER_INTSTAT_FFT	0xf0830010
-#define	F367TER_INTSAT_AGC	0xf0830008
-#define	F367TER_INTSTAT_TPS1	0xf0830004
-#define	F367TER_INTSTAT_TPS2	0xf0830002
-#define	F367TER_INTSTAT_TPS3	0xf0830001
-
-/* COR_MODEGUARD */
-#define	R367TER_COR_MODEGUARD	0xf084
-#define	F367TER_FORCE	0xf0840010
-#define	F367TER_MODE	0xf084000c
-#define	F367TER_GUARD	0xf0840003
-
-/* AGC_CTL */
-#define	R367TER_AGC_CTL	0xf085
-#define	F367TER_AGC_TIMING_FACTOR	0xf08500e0
-#define	F367TER_AGC_LAST	0xf0850010
-#define	F367TER_AGC_GAIN	0xf085000c
-#define	F367TER_AGC_NEG	0xf0850002
-#define	F367TER_AGC_SET	0xf0850001
-
-/* AGC_MANUAL1 */
-#define	R367TER_AGC_MANUAL1	0xf086
-#define	F367TER_AGC_VAL_LO	0xf08600ff
-
-/* AGC_MANUAL2 */
-#define	R367TER_AGC_MANUAL2	0xf087
-#define	F367TER_AGC_VAL_HI	0xf087000f
-
-/* AGC_TARG */
-#define	R367TER_AGC_TARG	0xf088
-#define	F367TER_AGC_TARGET	0xf08800ff
-
-/* AGC_GAIN1 */
-#define	R367TER_AGC_GAIN1	0xf089
-#define	F367TER_AGC_GAIN_LO	0xf08900ff
-
-/* AGC_GAIN2 */
-#define	R367TER_AGC_GAIN2	0xf08a
-#define	F367TER_AGC_LOCKED_GAIN2	0xf08a0010
-#define	F367TER_AGC_GAIN_HI	0xf08a000f
-
-/* RESERVED_1 */
-#define	R367TER_RESERVED_1	0xf08b
-#define	F367TER_RESERVED1	0xf08b00ff
-
-/* RESERVED_2 */
-#define	R367TER_RESERVED_2	0xf08c
-#define	F367TER_RESERVED2	0xf08c00ff
-
-/* RESERVED_3 */
-#define	R367TER_RESERVED_3	0xf08d
-#define	F367TER_RESERVED3	0xf08d00ff
-
-/* CAS_CTL */
-#define	R367TER_CAS_CTL	0xf08e
-#define	F367TER_CCS_ENABLE	0xf08e0080
-#define	F367TER_ACS_DISABLE	0xf08e0040
-#define	F367TER_DAGC_DIS	0xf08e0020
-#define	F367TER_DAGC_GAIN	0xf08e0018
-#define	F367TER_CCSMU	0xf08e0007
-
-/* CAS_FREQ */
-#define	R367TER_CAS_FREQ	0xf08f
-#define	F367TER_CCS_FREQ	0xf08f00ff
-
-/* CAS_DAGCGAIN */
-#define	R367TER_CAS_DAGCGAIN	0xf090
-#define	F367TER_CAS_DAGC_GAIN	0xf09000ff
-
-/* SYR_CTL */
-#define	R367TER_SYR_CTL	0xf091
-#define	F367TER_SICTH_ENABLE	0xf0910080
-#define	F367TER_LONG_ECHO	0xf0910078
-#define	F367TER_AUTO_LE_EN	0xf0910004
-#define	F367TER_SYR_BYPASS	0xf0910002
-#define	F367TER_SYR_TR_DIS	0xf0910001
-
-/* SYR_STAT */
-#define	R367TER_SYR_STAT	0xf092
-#define	F367TER_SYR_LOCKED_STAT	0xf0920010
-#define	F367TER_SYR_MODE	0xf092000c
-#define	F367TER_SYR_GUARD	0xf0920003
-
-/* SYR_NCO1 */
-#define	R367TER_SYR_NCO1	0xf093
-#define	F367TER_SYR_NCO_LO	0xf09300ff
-
-/* SYR_NCO2 */
-#define	R367TER_SYR_NCO2	0xf094
-#define	F367TER_SYR_NCO_HI	0xf094003f
-
-/* SYR_OFFSET1 */
-#define	R367TER_SYR_OFFSET1	0xf095
-#define	F367TER_SYR_OFFSET_LO	0xf09500ff
-
-/* SYR_OFFSET2 */
-#define	R367TER_SYR_OFFSET2	0xf096
-#define	F367TER_SYR_OFFSET_HI	0xf096003f
-
-/* FFT_CTL */
-#define	R367TER_FFT_CTL	0xf097
-#define	F367TER_SHIFT_FFT_TRIG	0xf0970018
-#define	F367TER_FFT_TRIGGER	0xf0970004
-#define	F367TER_FFT_MANUAL	0xf0970002
-#define	F367TER_IFFT_MODE	0xf0970001
-
-/* SCR_CTL */
-#define	R367TER_SCR_CTL	0xf098
-#define	F367TER_SYRADJDECAY	0xf0980070
-#define	F367TER_SCR_CPEDIS	0xf0980002
-#define	F367TER_SCR_DIS	0xf0980001
-
-/* PPM_CTL1 */
-#define	R367TER_PPM_CTL1	0xf099
-#define	F367TER_PPM_MAXFREQ	0xf0990030
-#define	F367TER_PPM_MAXTIM	0xf0990008
-#define	F367TER_PPM_INVSEL	0xf0990004
-#define	F367TER_PPM_SCATDIS	0xf0990002
-#define	F367TER_PPM_BYP	0xf0990001
-
-/* TRL_CTL */
-#define	R367TER_TRL_CTL	0xf09a
-#define	F367TER_TRL_NOMRATE_LSB	0xf09a0080
-#define	F367TER_TRL_GAIN_FACTOR	0xf09a0078
-#define	F367TER_TRL_LOOPGAIN	0xf09a0007
-
-/* TRL_NOMRATE1 */
-#define	R367TER_TRL_NOMRATE1	0xf09b
-#define	F367TER_TRL_NOMRATE_LO	0xf09b00ff
-
-/* TRL_NOMRATE2 */
-#define	R367TER_TRL_NOMRATE2	0xf09c
-#define	F367TER_TRL_NOMRATE_HI	0xf09c00ff
-
-/* TRL_TIME1 */
-#define	R367TER_TRL_TIME1	0xf09d
-#define	F367TER_TRL_TOFFSET_LO	0xf09d00ff
-
-/* TRL_TIME2 */
-#define	R367TER_TRL_TIME2	0xf09e
-#define	F367TER_TRL_TOFFSET_HI	0xf09e00ff
-
-/* CRL_CTL */
-#define	R367TER_CRL_CTL	0xf09f
-#define	F367TER_CRL_DIS	0xf09f0080
-#define	F367TER_CRL_GAIN_FACTOR	0xf09f0078
-#define	F367TER_CRL_LOOPGAIN	0xf09f0007
-
-/* CRL_FREQ1 */
-#define	R367TER_CRL_FREQ1	0xf0a0
-#define	F367TER_CRL_FOFFSET_LO	0xf0a000ff
-
-/* CRL_FREQ2 */
-#define	R367TER_CRL_FREQ2	0xf0a1
-#define	F367TER_CRL_FOFFSET_HI	0xf0a100ff
-
-/* CRL_FREQ3 */
-#define	R367TER_CRL_FREQ3	0xf0a2
-#define	F367TER_CRL_FOFFSET_VHI	0xf0a200ff
-
-/* TPS_SFRAME_CTL */
-#define	R367TER_TPS_SFRAME_CTL	0xf0a3
-#define	F367TER_TPS_SFRAME_SYNC	0xf0a30001
-
-/* CHC_SNR */
-#define	R367TER_CHC_SNR	0xf0a4
-#define	F367TER_CHCSNR	0xf0a400ff
-
-/* BDI_CTL */
-#define	R367TER_BDI_CTL	0xf0a5
-#define	F367TER_BDI_LPSEL	0xf0a50002
-#define	F367TER_BDI_SERIAL	0xf0a50001
-
-/* DMP_CTL */
-#define	R367TER_DMP_CTL	0xf0a6
-#define	F367TER_DMP_SCALING_FACTOR	0xf0a6001e
-#define	F367TER_DMP_SDDIS	0xf0a60001
-
-/* TPS_RCVD1 */
-#define	R367TER_TPS_RCVD1	0xf0a7
-#define	F367TER_TPS_CHANGE	0xf0a70040
-#define	F367TER_BCH_OK	0xf0a70020
-#define	F367TER_TPS_SYNC	0xf0a70010
-#define	F367TER_TPS_FRAME	0xf0a70003
-
-/* TPS_RCVD2 */
-#define	R367TER_TPS_RCVD2	0xf0a8
-#define	F367TER_TPS_HIERMODE	0xf0a80070
-#define	F367TER_TPS_CONST	0xf0a80003
-
-/* TPS_RCVD3 */
-#define	R367TER_TPS_RCVD3	0xf0a9
-#define	F367TER_TPS_LPCODE	0xf0a90070
-#define	F367TER_TPS_HPCODE	0xf0a90007
-
-/* TPS_RCVD4 */
-#define	R367TER_TPS_RCVD4	0xf0aa
-#define	F367TER_TPS_GUARD	0xf0aa0030
-#define	F367TER_TPS_MODE	0xf0aa0003
-
-/* TPS_ID_CELL1 */
-#define	R367TER_TPS_ID_CELL1	0xf0ab
-#define	F367TER_TPS_ID_CELL_LO	0xf0ab00ff
-
-/* TPS_ID_CELL2 */
-#define	R367TER_TPS_ID_CELL2	0xf0ac
-#define	F367TER_TPS_ID_CELL_HI	0xf0ac00ff
-
-/* TPS_RCVD5_SET1 */
-#define	R367TER_TPS_RCVD5_SET1	0xf0ad
-#define	F367TER_TPS_NA	0xf0ad00fC
-#define	F367TER_TPS_SETFRAME	0xf0ad0003
-
-/* TPS_SET2 */
-#define	R367TER_TPS_SET2	0xf0ae
-#define	F367TER_TPS_SETHIERMODE	0xf0ae0070
-#define	F367TER_TPS_SETCONST	0xf0ae0003
-
-/* TPS_SET3 */
-#define	R367TER_TPS_SET3	0xf0af
-#define	F367TER_TPS_SETLPCODE	0xf0af0070
-#define	F367TER_TPS_SETHPCODE	0xf0af0007
-
-/* TPS_CTL */
-#define	R367TER_TPS_CTL	0xf0b0
-#define	F367TER_TPS_IMM	0xf0b00004
-#define	F367TER_TPS_BCHDIS	0xf0b00002
-#define	F367TER_TPS_UPDDIS	0xf0b00001
-
-/* CTL_FFTOSNUM */
-#define	R367TER_CTL_FFTOSNUM	0xf0b1
-#define	F367TER_SYMBOL_NUMBER	0xf0b1007f
-
-/* TESTSELECT */
-#define	R367TER_TESTSELECT	0xf0b2
-#define	F367TER_TEST_SELECT	0xf0b2001f
-
-/* MSC_REV */
-#define	R367TER_MSC_REV	0xf0b3
-#define	F367TER_REV_NUMBER	0xf0b300ff
-
-/* PIR_CTL */
-#define	R367TER_PIR_CTL	0xf0b4
-#define	F367TER_FREEZE	0xf0b40001
-
-/* SNR_CARRIER1 */
-#define	R367TER_SNR_CARRIER1	0xf0b5
-#define	F367TER_SNR_CARRIER_LO	0xf0b500ff
-
-/* SNR_CARRIER2 */
-#define	R367TER_SNR_CARRIER2	0xf0b6
-#define	F367TER_MEAN	0xf0b600c0
-#define	F367TER_SNR_CARRIER_HI	0xf0b6001f
-
-/* PPM_CPAMP */
-#define	R367TER_PPM_CPAMP	0xf0b7
-#define	F367TER_PPM_CPC	0xf0b700ff
-
-/* TSM_AP0 */
-#define	R367TER_TSM_AP0	0xf0b8
-#define	F367TER_ADDRESS_BYTE_0	0xf0b800ff
-
-/* TSM_AP1 */
-#define	R367TER_TSM_AP1	0xf0b9
-#define	F367TER_ADDRESS_BYTE_1	0xf0b900ff
-
-/* TSM_AP2 */
-#define	R367TER_TSM_AP2	0xf0bA
-#define	F367TER_DATA_BYTE_0	0xf0ba00ff
-
-/* TSM_AP3 */
-#define	R367TER_TSM_AP3	0xf0bB
-#define	F367TER_DATA_BYTE_1	0xf0bb00ff
-
-/* TSM_AP4 */
-#define	R367TER_TSM_AP4	0xf0bC
-#define	F367TER_DATA_BYTE_2	0xf0bc00ff
-
-/* TSM_AP5 */
-#define	R367TER_TSM_AP5	0xf0bD
-#define	F367TER_DATA_BYTE_3	0xf0bd00ff
-
-/* TSM_AP6 */
-#define	R367TER_TSM_AP6	0xf0bE
-#define	F367TER_TSM_AP_6	0xf0be00ff
-
-/* TSM_AP7 */
-#define	R367TER_TSM_AP7	0xf0bF
-#define	F367TER_MEM_SELECT_BYTE	0xf0bf00ff
-
-/* TSTRES */
-#define	R367TER_TSTRES	0xf0c0
-#define	F367TER_FRES_DISPLAY	0xf0c00080
-#define	F367TER_FRES_FIFO_AD	0xf0c00020
-#define	F367TER_FRESRS	0xf0c00010
-#define	F367TER_FRESACS	0xf0c00008
-#define	F367TER_FRESFEC	0xf0c00004
-#define	F367TER_FRES_PRIF	0xf0c00002
-#define	F367TER_FRESCORE	0xf0c00001
-
-/* ANACTRL */
-#define	R367TER_ANACTRL	0xf0c1
-#define	F367TER_BYPASS_XTAL	0xf0c10040
-#define	F367TER_BYPASS_PLLXN	0xf0c1000c
-#define	F367TER_DIS_PAD_OSC	0xf0c10002
-#define	F367TER_STDBY_PLLXN	0xf0c10001
-
-/* TSTBUS */
-#define	R367TER_TSTBUS	0xf0c2
-#define	F367TER_TS_BYTE_CLK_INV	0xf0c20080
-#define	F367TER_CFG_IP	0xf0c20070
-#define	F367TER_CFG_TST	0xf0c2000f
-
-/* TSTRATE */
-#define	R367TER_TSTRATE	0xf0c6
-#define	F367TER_FORCEPHA	0xf0c60080
-#define	F367TER_FNEWPHA	0xf0c60010
-#define	F367TER_FROT90	0xf0c60008
-#define	F367TER_FR	0xf0c60007
-
-/* CONSTMODE */
-#define	R367TER_CONSTMODE	0xf0cb
-#define	F367TER_TST_PRIF	0xf0cb00e0
-#define	F367TER_CAR_TYPE	0xf0cb0018
-#define	F367TER_CONST_MODE	0xf0cb0003
-
-/* CONSTCARR1 */
-#define	R367TER_CONSTCARR1	0xf0cc
-#define	F367TER_CONST_CARR_LO	0xf0cc00ff
-
-/* CONSTCARR2 */
-#define	R367TER_CONSTCARR2	0xf0cd
-#define	F367TER_CONST_CARR_HI	0xf0cd001f
-
-/* ICONSTEL */
-#define	R367TER_ICONSTEL	0xf0ce
-#define	F367TER_PICONSTEL	0xf0ce00ff
-
-/* QCONSTEL */
-#define	R367TER_QCONSTEL	0xf0cf
-#define	F367TER_PQCONSTEL	0xf0cf00ff
-
-/* TSTBISTRES0 */
-#define	R367TER_TSTBISTRES0	0xf0d0
-#define	F367TER_BEND_PPM	0xf0d00080
-#define	F367TER_BBAD_PPM	0xf0d00040
-#define	F367TER_BEND_FFTW	0xf0d00020
-#define	F367TER_BBAD_FFTW	0xf0d00010
-#define	F367TER_BEND_FFT_BUF	0xf0d00008
-#define	F367TER_BBAD_FFT_BUF	0xf0d00004
-#define	F367TER_BEND_SYR	0xf0d00002
-#define	F367TER_BBAD_SYR	0xf0d00001
-
-/* TSTBISTRES1 */
-#define	R367TER_TSTBISTRES1	0xf0d1
-#define	F367TER_BEND_CHC_CP	0xf0d10080
-#define	F367TER_BBAD_CHC_CP	0xf0d10040
-#define	F367TER_BEND_CHCI	0xf0d10020
-#define	F367TER_BBAD_CHCI	0xf0d10010
-#define	F367TER_BEND_BDI	0xf0d10008
-#define	F367TER_BBAD_BDI	0xf0d10004
-#define	F367TER_BEND_SDI	0xf0d10002
-#define	F367TER_BBAD_SDI	0xf0d10001
-
-/* TSTBISTRES2 */
-#define	R367TER_TSTBISTRES2	0xf0d2
-#define	F367TER_BEND_CHC_INC	0xf0d20080
-#define	F367TER_BBAD_CHC_INC	0xf0d20040
-#define	F367TER_BEND_CHC_SPP	0xf0d20020
-#define	F367TER_BBAD_CHC_SPP	0xf0d20010
-#define	F367TER_BEND_CHC_CPP	0xf0d20008
-#define	F367TER_BBAD_CHC_CPP	0xf0d20004
-#define	F367TER_BEND_CHC_SP	0xf0d20002
-#define	F367TER_BBAD_CHC_SP	0xf0d20001
-
-/* TSTBISTRES3 */
-#define	R367TER_TSTBISTRES3	0xf0d3
-#define	F367TER_BEND_QAM	0xf0d30080
-#define	F367TER_BBAD_QAM	0xf0d30040
-#define	F367TER_BEND_SFEC_VIT	0xf0d30020
-#define	F367TER_BBAD_SFEC_VIT	0xf0d30010
-#define	F367TER_BEND_SFEC_DLINE	0xf0d30008
-#define	F367TER_BBAD_SFEC_DLINE	0xf0d30004
-#define	F367TER_BEND_SFEC_HW	0xf0d30002
-#define	F367TER_BBAD_SFEC_HW	0xf0d30001
-
-/* RF_AGC1 */
-#define	R367TER_RF_AGC1	0xf0d4
-#define	F367TER_RF_AGC1_LEVEL_HI	0xf0d400ff
-
-/* RF_AGC2 */
-#define	R367TER_RF_AGC2	0xf0d5
-#define	F367TER_REF_ADGP	0xf0d50080
-#define	F367TER_STDBY_ADCGP	0xf0d50020
-#define	F367TER_CHANNEL_SEL	0xf0d5001c
-#define	F367TER_RF_AGC1_LEVEL_LO	0xf0d50003
-
-/* ANADIGCTRL */
-#define	R367TER_ANADIGCTRL	0xf0d7
-#define	F367TER_SEL_CLKDEM	0xf0d70020
-#define	F367TER_EN_BUFFER_Q	0xf0d70010
-#define	F367TER_EN_BUFFER_I	0xf0d70008
-#define	F367TER_ADC_RIS_EGDE	0xf0d70004
-#define	F367TER_SGN_ADC	0xf0d70002
-#define	F367TER_SEL_AD12_SYNC	0xf0d70001
-
-/* PLLMDIV */
-#define	R367TER_PLLMDIV	0xf0d8
-#define	F367TER_PLL_MDIV	0xf0d800ff
-
-/* PLLNDIV */
-#define	R367TER_PLLNDIV	0xf0d9
-#define	F367TER_PLL_NDIV	0xf0d900ff
-
-/* PLLSETUP */
-#define	R367TER_PLLSETUP	0xf0dA
-#define	F367TER_PLL_PDIV	0xf0da0070
-#define	F367TER_PLL_KDIV	0xf0da000f
-
-/* DUAL_AD12 */
-#define	R367TER_DUAL_AD12	0xf0dB
-#define	F367TER_FS20M	0xf0db0020
-#define	F367TER_FS50M	0xf0db0010
-#define	F367TER_INMODe0	0xf0db0008
-#define	F367TER_POFFQ	0xf0db0004
-#define	F367TER_POFFI	0xf0db0002
-#define	F367TER_INMODE1	0xf0db0001
-
-/* TSTBIST */
-#define	R367TER_TSTBIST	0xf0dC
-#define	F367TER_TST_BYP_CLK	0xf0dc0080
-#define	F367TER_TST_GCLKENA_STD	0xf0dc0040
-#define	F367TER_TST_GCLKENA	0xf0dc0020
-#define	F367TER_TST_MEMBIST	0xf0dc001f
-
-/* PAD_COMP_CTRL */
-#define	R367TER_PAD_COMP_CTRL	0xf0dD
-#define	F367TER_COMPTQ	0xf0dd0010
-#define	F367TER_COMPEN	0xf0dd0008
-#define	F367TER_FREEZE2	0xf0dd0004
-#define	F367TER_SLEEP_INHBT	0xf0dd0002
-#define	F367TER_CHIP_SLEEP	0xf0dd0001
-
-/* PAD_COMP_WR */
-#define	R367TER_PAD_COMP_WR	0xf0de
-#define	F367TER_WR_ASRC	0xf0de007f
-
-/* PAD_COMP_RD */
-#define	R367TER_PAD_COMP_RD	0xf0df
-#define	F367TER_COMPOK	0xf0df0080
-#define	F367TER_RD_ASRC	0xf0df007f
-
-/* SYR_TARGET_FFTADJT_MSB */
-#define	R367TER_SYR_TARGET_FFTADJT_MSB	0xf100
-#define	F367TER_SYR_START	0xf1000080
-#define	F367TER_SYR_TARGET_FFTADJ_HI	0xf100000f
-
-/* SYR_TARGET_FFTADJT_LSB */
-#define	R367TER_SYR_TARGET_FFTADJT_LSB	0xf101
-#define	F367TER_SYR_TARGET_FFTADJ_LO	0xf10100ff
-
-/* SYR_TARGET_CHCADJT_MSB */
-#define	R367TER_SYR_TARGET_CHCADJT_MSB	0xf102
-#define	F367TER_SYR_TARGET_CHCADJ_HI	0xf102000f
-
-/* SYR_TARGET_CHCADJT_LSB */
-#define	R367TER_SYR_TARGET_CHCADJT_LSB	0xf103
-#define	F367TER_SYR_TARGET_CHCADJ_LO	0xf10300ff
-
-/* SYR_FLAG */
-#define	R367TER_SYR_FLAG	0xf104
-#define	F367TER_TRIG_FLG1	0xf1040080
-#define	F367TER_TRIG_FLG0	0xf1040040
-#define	F367TER_FFT_FLG1	0xf1040008
-#define	F367TER_FFT_FLG0	0xf1040004
-#define	F367TER_CHC_FLG1	0xf1040002
-#define	F367TER_CHC_FLG0	0xf1040001
-
-/* CRL_TARGET1 */
-#define	R367TER_CRL_TARGET1	0xf105
-#define	F367TER_CRL_START	0xf1050080
-#define	F367TER_CRL_TARGET_VHI	0xf105000f
-
-/* CRL_TARGET2 */
-#define	R367TER_CRL_TARGET2	0xf106
-#define	F367TER_CRL_TARGET_HI	0xf10600ff
-
-/* CRL_TARGET3 */
-#define	R367TER_CRL_TARGET3	0xf107
-#define	F367TER_CRL_TARGET_LO	0xf10700ff
-
-/* CRL_TARGET4 */
-#define	R367TER_CRL_TARGET4	0xf108
-#define	F367TER_CRL_TARGET_VLO	0xf10800ff
-
-/* CRL_FLAG */
-#define	R367TER_CRL_FLAG	0xf109
-#define	F367TER_CRL_FLAG1	0xf1090002
-#define	F367TER_CRL_FLAG0	0xf1090001
-
-/* TRL_TARGET1 */
-#define	R367TER_TRL_TARGET1	0xf10a
-#define	F367TER_TRL_TARGET_HI	0xf10a00ff
-
-/* TRL_TARGET2 */
-#define	R367TER_TRL_TARGET2	0xf10b
-#define	F367TER_TRL_TARGET_LO	0xf10b00ff
-
-/* TRL_CHC */
-#define	R367TER_TRL_CHC	0xf10c
-#define	F367TER_TRL_START	0xf10c0080
-#define	F367TER_CHC_START	0xf10c0040
-#define	F367TER_TRL_FLAG1	0xf10c0002
-#define	F367TER_TRL_FLAG0	0xf10c0001
-
-/* CHC_SNR_TARG */
-#define	R367TER_CHC_SNR_TARG	0xf10d
-#define	F367TER_CHC_SNR_TARGET	0xf10d00ff
-
-/* TOP_TRACK */
-#define	R367TER_TOP_TRACK	0xf10e
-#define	F367TER_TOP_START	0xf10e0080
-#define	F367TER_FIRST_FLAG	0xf10e0070
-#define	F367TER_TOP_FLAG1	0xf10e0008
-#define	F367TER_TOP_FLAG0	0xf10e0004
-#define	F367TER_CHC_FLAG1	0xf10e0002
-#define	F367TER_CHC_FLAG0	0xf10e0001
-
-/* TRACKER_FREE1 */
-#define	R367TER_TRACKER_FREE1	0xf10f
-#define	F367TER_TRACKER_FREE_1	0xf10f00ff
-
-/* ERROR_CRL1 */
-#define	R367TER_ERROR_CRL1	0xf110
-#define	F367TER_ERROR_CRL_VHI	0xf11000ff
-
-/* ERROR_CRL2 */
-#define	R367TER_ERROR_CRL2	0xf111
-#define	F367TER_ERROR_CRL_HI	0xf11100ff
-
-/* ERROR_CRL3 */
-#define	R367TER_ERROR_CRL3	0xf112
-#define	F367TER_ERROR_CRL_LOI	0xf11200ff
-
-/* ERROR_CRL4 */
-#define	R367TER_ERROR_CRL4	0xf113
-#define	F367TER_ERROR_CRL_VLO	0xf11300ff
-
-/* DEC_NCO1 */
-#define	R367TER_DEC_NCO1	0xf114
-#define	F367TER_DEC_NCO_VHI	0xf11400ff
-
-/* DEC_NCO2 */
-#define	R367TER_DEC_NCO2	0xf115
-#define	F367TER_DEC_NCO_HI	0xf11500ff
-
-/* DEC_NCO3 */
-#define	R367TER_DEC_NCO3	0xf116
-#define	F367TER_DEC_NCO_LO	0xf11600ff
-
-/* SNR */
-#define	R367TER_SNR	0xf117
-#define	F367TER_SNRATIO	0xf11700ff
-
-/* SYR_FFTADJ1 */
-#define	R367TER_SYR_FFTADJ1	0xf118
-#define	F367TER_SYR_FFTADJ_HI	0xf11800ff
-
-/* SYR_FFTADJ2 */
-#define	R367TER_SYR_FFTADJ2	0xf119
-#define	F367TER_SYR_FFTADJ_LO	0xf11900ff
-
-/* SYR_CHCADJ1 */
-#define	R367TER_SYR_CHCADJ1	0xf11a
-#define	F367TER_SYR_CHCADJ_HI	0xf11a00ff
-
-/* SYR_CHCADJ2 */
-#define	R367TER_SYR_CHCADJ2	0xf11b
-#define	F367TER_SYR_CHCADJ_LO	0xf11b00ff
-
-/* SYR_OFF */
-#define	R367TER_SYR_OFF	0xf11c
-#define	F367TER_SYR_OFFSET	0xf11c00ff
-
-/* PPM_OFFSET1 */
-#define	R367TER_PPM_OFFSET1	0xf11d
-#define	F367TER_PPM_OFFSET_HI	0xf11d00ff
-
-/* PPM_OFFSET2 */
-#define	R367TER_PPM_OFFSET2	0xf11e
-#define	F367TER_PPM_OFFSET_LO	0xf11e00ff
-
-/* TRACKER_FREE2 */
-#define	R367TER_TRACKER_FREE2	0xf11f
-#define	F367TER_TRACKER_FREE_2	0xf11f00ff
-
-/* DEBG_LT10 */
-#define	R367TER_DEBG_LT10	0xf120
-#define	F367TER_DEBUG_LT10	0xf12000ff
-
-/* DEBG_LT11 */
-#define	R367TER_DEBG_LT11	0xf121
-#define	F367TER_DEBUG_LT11	0xf12100ff
-
-/* DEBG_LT12 */
-#define	R367TER_DEBG_LT12	0xf122
-#define	F367TER_DEBUG_LT12	0xf12200ff
-
-/* DEBG_LT13 */
-#define	R367TER_DEBG_LT13	0xf123
-#define	F367TER_DEBUG_LT13	0xf12300ff
-
-/* DEBG_LT14 */
-#define	R367TER_DEBG_LT14	0xf124
-#define	F367TER_DEBUG_LT14	0xf12400ff
-
-/* DEBG_LT15 */
-#define	R367TER_DEBG_LT15	0xf125
-#define	F367TER_DEBUG_LT15	0xf12500ff
-
-/* DEBG_LT16 */
-#define	R367TER_DEBG_LT16	0xf126
-#define	F367TER_DEBUG_LT16	0xf12600ff
-
-/* DEBG_LT17 */
-#define	R367TER_DEBG_LT17	0xf127
-#define	F367TER_DEBUG_LT17	0xf12700ff
-
-/* DEBG_LT18 */
-#define	R367TER_DEBG_LT18	0xf128
-#define	F367TER_DEBUG_LT18	0xf12800ff
-
-/* DEBG_LT19 */
-#define	R367TER_DEBG_LT19	0xf129
-#define	F367TER_DEBUG_LT19	0xf12900ff
-
-/* DEBG_LT1a */
-#define	R367TER_DEBG_LT1A	0xf12a
-#define	F367TER_DEBUG_LT1A	0xf12a00ff
-
-/* DEBG_LT1b */
-#define	R367TER_DEBG_LT1B	0xf12b
-#define	F367TER_DEBUG_LT1B	0xf12b00ff
-
-/* DEBG_LT1c */
-#define	R367TER_DEBG_LT1C	0xf12c
-#define	F367TER_DEBUG_LT1C	0xf12c00ff
-
-/* DEBG_LT1D */
-#define	R367TER_DEBG_LT1D	0xf12d
-#define	F367TER_DEBUG_LT1D	0xf12d00ff
-
-/* DEBG_LT1E */
-#define	R367TER_DEBG_LT1E	0xf12e
-#define	F367TER_DEBUG_LT1E	0xf12e00ff
-
-/* DEBG_LT1F */
-#define	R367TER_DEBG_LT1F	0xf12f
-#define	F367TER_DEBUG_LT1F	0xf12f00ff
-
-/* RCCFGH */
-#define	R367TER_RCCFGH	0xf200
-#define	F367TER_TSRCFIFO_DVBCI	0xf2000080
-#define	F367TER_TSRCFIFO_SERIAL	0xf2000040
-#define	F367TER_TSRCFIFO_DISABLE	0xf2000020
-#define	F367TER_TSFIFO_2TORC	0xf2000010
-#define	F367TER_TSRCFIFO_HSGNLOUT	0xf2000008
-#define	F367TER_TSRCFIFO_ERRMODE	0xf2000006
-#define	F367TER_RCCFGH_0	0xf2000001
-
-/* RCCFGM */
-#define	R367TER_RCCFGM	0xf201
-#define	F367TER_TSRCFIFO_MANSPEED	0xf20100c0
-#define	F367TER_TSRCFIFO_PERMDATA	0xf2010020
-#define	F367TER_TSRCFIFO_NONEWSGNL	0xf2010010
-#define	F367TER_RCBYTE_OVERSAMPLING	0xf201000e
-#define	F367TER_TSRCFIFO_INVDATA	0xf2010001
-
-/* RCCFGL */
-#define	R367TER_RCCFGL	0xf202
-#define	F367TER_TSRCFIFO_BCLKDEL1cK	0xf20200c0
-#define	F367TER_RCCFGL_5	0xf2020020
-#define	F367TER_TSRCFIFO_DUTY50	0xf2020010
-#define	F367TER_TSRCFIFO_NSGNL2dATA	0xf2020008
-#define	F367TER_TSRCFIFO_DISSERMUX	0xf2020004
-#define	F367TER_RCCFGL_1	0xf2020002
-#define	F367TER_TSRCFIFO_STOPCKDIS	0xf2020001
-
-/* RCINSDELH */
-#define	R367TER_RCINSDELH	0xf203
-#define	F367TER_TSRCDEL_SYNCBYTE	0xf2030080
-#define	F367TER_TSRCDEL_XXHEADER	0xf2030040
-#define	F367TER_TSRCDEL_BBHEADER	0xf2030020
-#define	F367TER_TSRCDEL_DATAFIELD	0xf2030010
-#define	F367TER_TSRCINSDEL_ISCR	0xf2030008
-#define	F367TER_TSRCINSDEL_NPD	0xf2030004
-#define	F367TER_TSRCINSDEL_RSPARITY	0xf2030002
-#define	F367TER_TSRCINSDEL_CRC8	0xf2030001
-
-/* RCINSDELM */
-#define	R367TER_RCINSDELM	0xf204
-#define	F367TER_TSRCINS_BBPADDING	0xf2040080
-#define	F367TER_TSRCINS_BCHFEC	0xf2040040
-#define	F367TER_TSRCINS_LDPCFEC	0xf2040020
-#define	F367TER_TSRCINS_EMODCOD	0xf2040010
-#define	F367TER_TSRCINS_TOKEN	0xf2040008
-#define	F367TER_TSRCINS_XXXERR	0xf2040004
-#define	F367TER_TSRCINS_MATYPE	0xf2040002
-#define	F367TER_TSRCINS_UPL	0xf2040001
-
-/* RCINSDELL */
-#define	R367TER_RCINSDELL	0xf205
-#define	F367TER_TSRCINS_DFL	0xf2050080
-#define	F367TER_TSRCINS_SYNCD	0xf2050040
-#define	F367TER_TSRCINS_BLOCLEN	0xf2050020
-#define	F367TER_TSRCINS_SIGPCOUNT	0xf2050010
-#define	F367TER_TSRCINS_FIFO	0xf2050008
-#define	F367TER_TSRCINS_REALPACK	0xf2050004
-#define	F367TER_TSRCINS_TSCONFIG	0xf2050002
-#define	F367TER_TSRCINS_LATENCY	0xf2050001
-
-/* RCSTATUS */
-#define	R367TER_RCSTATUS	0xf206
-#define	F367TER_TSRCFIFO_LINEOK	0xf2060080
-#define	F367TER_TSRCFIFO_ERROR	0xf2060040
-#define	F367TER_TSRCFIFO_DATA7	0xf2060020
-#define	F367TER_RCSTATUS_4	0xf2060010
-#define	F367TER_TSRCFIFO_DEMODSEL	0xf2060008
-#define	F367TER_TSRC1FIFOSPEED_STORE	0xf2060004
-#define	F367TER_RCSTATUS_1	0xf2060002
-#define	F367TER_TSRCSERIAL_IMPOSSIBLE	0xf2060001
-
-/* RCSPEED */
-#define	R367TER_RCSPEED	0xf207
-#define	F367TER_TSRCFIFO_OUTSPEED	0xf20700ff
-
-/* RCDEBUGM */
-#define	R367TER_RCDEBUGM	0xf208
-#define	F367TER_SD_UNSYNC	0xf2080080
-#define	F367TER_ULFLOCK_DETECTM	0xf2080040
-#define	F367TER_SUL_SELECTOS	0xf2080020
-#define	F367TER_DILUL_NOSCRBLE	0xf2080010
-#define	F367TER_NUL_SCRB	0xf2080008
-#define	F367TER_UL_SCRB	0xf2080004
-#define	F367TER_SCRAULBAD	0xf2080002
-#define	F367TER_SCRAUL_UNSYNC	0xf2080001
-
-/* RCDEBUGL */
-#define	R367TER_RCDEBUGL	0xf209
-#define	F367TER_RS_ERR	0xf2090080
-#define	F367TER_LLFLOCK_DETECTM	0xf2090040
-#define	F367TER_NOT_SUL_SELECTOS	0xf2090020
-#define	F367TER_DILLL_NOSCRBLE	0xf2090010
-#define	F367TER_NLL_SCRB	0xf2090008
-#define	F367TER_LL_SCRB	0xf2090004
-#define	F367TER_SCRALLBAD	0xf2090002
-#define	F367TER_SCRALL_UNSYNC	0xf2090001
-
-/* RCOBSCFG */
-#define	R367TER_RCOBSCFG	0xf20a
-#define	F367TER_TSRCFIFO_OBSCFG	0xf20a00ff
-
-/* RCOBSM */
-#define	R367TER_RCOBSM	0xf20b
-#define	F367TER_TSRCFIFO_OBSDATA_HI	0xf20b00ff
-
-/* RCOBSL */
-#define	R367TER_RCOBSL	0xf20c
-#define	F367TER_TSRCFIFO_OBSDATA_LO	0xf20c00ff
-
-/* RCFECSPY */
-#define	R367TER_RCFECSPY	0xf210
-#define	F367TER_SPYRC_ENABLE	0xf2100080
-#define	F367TER_RCNO_SYNCBYTE	0xf2100040
-#define	F367TER_RCSERIAL_MODE	0xf2100020
-#define	F367TER_RCUNUSUAL_PACKET	0xf2100010
-#define	F367TER_BERRCMETER_DATAMODE	0xf210000c
-#define	F367TER_BERRCMETER_LMODE	0xf2100002
-#define	F367TER_BERRCMETER_RESET	0xf2100001
-
-/* RCFSPYCFG */
-#define	R367TER_RCFSPYCFG	0xf211
-#define	F367TER_FECSPYRC_INPUT	0xf21100c0
-#define	F367TER_RCRST_ON_ERROR	0xf2110020
-#define	F367TER_RCONE_SHOT	0xf2110010
-#define	F367TER_RCI2C_MODE	0xf211000c
-#define	F367TER_SPYRC_HSTERESIS	0xf2110003
-
-/* RCFSPYDATA */
-#define	R367TER_RCFSPYDATA	0xf212
-#define	F367TER_SPYRC_STUFFING	0xf2120080
-#define	F367TER_RCNOERR_PKTJITTER	0xf2120040
-#define	F367TER_SPYRC_CNULLPKT	0xf2120020
-#define	F367TER_SPYRC_OUTDATA_MODE	0xf212001f
-
-/* RCFSPYOUT */
-#define	R367TER_RCFSPYOUT	0xf213
-#define	F367TER_FSPYRC_DIRECT	0xf2130080
-#define	F367TER_RCFSPYOUT_6	0xf2130040
-#define	F367TER_SPYRC_OUTDATA_BUS	0xf2130038
-#define	F367TER_RCSTUFF_MODE	0xf2130007
-
-/* RCFSTATUS */
-#define	R367TER_RCFSTATUS	0xf214
-#define	F367TER_SPYRC_ENDSIM	0xf2140080
-#define	F367TER_RCVALID_SIM	0xf2140040
-#define	F367TER_RCFOUND_SIGNAL	0xf2140020
-#define	F367TER_RCDSS_SYNCBYTE	0xf2140010
-#define	F367TER_RCRESULT_STATE	0xf214000f
-
-/* RCFGOODPACK */
-#define	R367TER_RCFGOODPACK	0xf215
-#define	F367TER_RCGOOD_PACKET	0xf21500ff
-
-/* RCFPACKCNT */
-#define	R367TER_RCFPACKCNT	0xf216
-#define	F367TER_RCPACKET_COUNTER	0xf21600ff
-
-/* RCFSPYMISC */
-#define	R367TER_RCFSPYMISC	0xf217
-#define	F367TER_RCLABEL_COUNTER	0xf21700ff
-
-/* RCFBERCPT4 */
-#define	R367TER_RCFBERCPT4	0xf218
-#define	F367TER_FBERRCMETER_CPT_MMMMSB	0xf21800ff
-
-/* RCFBERCPT3 */
-#define	R367TER_RCFBERCPT3	0xf219
-#define	F367TER_FBERRCMETER_CPT_MMMSB	0xf21900ff
-
-/* RCFBERCPT2 */
-#define	R367TER_RCFBERCPT2	0xf21a
-#define	F367TER_FBERRCMETER_CPT_MMSB	0xf21a00ff
-
-/* RCFBERCPT1 */
-#define	R367TER_RCFBERCPT1	0xf21b
-#define	F367TER_FBERRCMETER_CPT_MSB	0xf21b00ff
-
-/* RCFBERCPT0 */
-#define	R367TER_RCFBERCPT0	0xf21c
-#define	F367TER_FBERRCMETER_CPT_LSB	0xf21c00ff
-
-/* RCFBERERR2 */
-#define	R367TER_RCFBERERR2	0xf21d
-#define	F367TER_FBERRCMETER_ERR_HI	0xf21d00ff
-
-/* RCFBERERR1 */
-#define	R367TER_RCFBERERR1	0xf21e
-#define	F367TER_FBERRCMETER_ERR	0xf21e00ff
-
-/* RCFBERERR0 */
-#define	R367TER_RCFBERERR0	0xf21f
-#define	F367TER_FBERRCMETER_ERR_LO	0xf21f00ff
-
-/* RCFSTATESM */
-#define	R367TER_RCFSTATESM	0xf220
-#define	F367TER_RCRSTATE_F	0xf2200080
-#define	F367TER_RCRSTATE_E	0xf2200040
-#define	F367TER_RCRSTATE_D	0xf2200020
-#define	F367TER_RCRSTATE_C	0xf2200010
-#define	F367TER_RCRSTATE_B	0xf2200008
-#define	F367TER_RCRSTATE_A	0xf2200004
-#define	F367TER_RCRSTATE_9	0xf2200002
-#define	F367TER_RCRSTATE_8	0xf2200001
-
-/* RCFSTATESL */
-#define	R367TER_RCFSTATESL	0xf221
-#define	F367TER_RCRSTATE_7	0xf2210080
-#define	F367TER_RCRSTATE_6	0xf2210040
-#define	F367TER_RCRSTATE_5	0xf2210020
-#define	F367TER_RCRSTATE_4	0xf2210010
-#define	F367TER_RCRSTATE_3	0xf2210008
-#define	F367TER_RCRSTATE_2	0xf2210004
-#define	F367TER_RCRSTATE_1	0xf2210002
-#define	F367TER_RCRSTATE_0	0xf2210001
-
-/* RCFSPYBER */
-#define	R367TER_RCFSPYBER	0xf222
-#define	F367TER_RCFSPYBER_7	0xf2220080
-#define	F367TER_SPYRCOBS_XORREAD	0xf2220040
-#define	F367TER_FSPYRCBER_OBSMODE	0xf2220020
-#define	F367TER_FSPYRCBER_SYNCBYT	0xf2220010
-#define	F367TER_FSPYRCBER_UNSYNC	0xf2220008
-#define	F367TER_FSPYRCBER_CTIME	0xf2220007
-
-/* RCFSPYDISTM */
-#define	R367TER_RCFSPYDISTM	0xf223
-#define	F367TER_RCPKTTIME_DISTANCE_HI	0xf22300ff
-
-/* RCFSPYDISTL */
-#define	R367TER_RCFSPYDISTL	0xf224
-#define	F367TER_RCPKTTIME_DISTANCE_LO	0xf22400ff
-
-/* RCFSPYOBS7 */
-#define	R367TER_RCFSPYOBS7	0xf228
-#define	F367TER_RCSPYOBS_SPYFAIL	0xf2280080
-#define	F367TER_RCSPYOBS_SPYFAIL1	0xf2280040
-#define	F367TER_RCSPYOBS_ERROR	0xf2280020
-#define	F367TER_RCSPYOBS_STROUT	0xf2280010
-#define	F367TER_RCSPYOBS_RESULTSTATE1	0xf228000f
-
-/* RCFSPYOBS6 */
-#define	R367TER_RCFSPYOBS6	0xf229
-#define	F367TER_RCSPYOBS_RESULTSTATe0	0xf22900f0
-#define	F367TER_RCSPYOBS_RESULTSTATEM1	0xf229000f
-
-/* RCFSPYOBS5 */
-#define	R367TER_RCFSPYOBS5	0xf22a
-#define	F367TER_RCSPYOBS_BYTEOFPACKET1	0xf22a00ff
-
-/* RCFSPYOBS4 */
-#define	R367TER_RCFSPYOBS4	0xf22b
-#define	F367TER_RCSPYOBS_BYTEVALUE1	0xf22b00ff
-
-/* RCFSPYOBS3 */
-#define	R367TER_RCFSPYOBS3	0xf22c
-#define	F367TER_RCSPYOBS_DATA1	0xf22c00ff
-
-/* RCFSPYOBS2 */
-#define	R367TER_RCFSPYOBS2	0xf22d
-#define	F367TER_RCSPYOBS_DATa0	0xf22d00ff
-
-/* RCFSPYOBS1 */
-#define	R367TER_RCFSPYOBS1	0xf22e
-#define	F367TER_RCSPYOBS_DATAM1	0xf22e00ff
-
-/* RCFSPYOBS0 */
-#define	R367TER_RCFSPYOBS0	0xf22f
-#define	F367TER_RCSPYOBS_DATAM2	0xf22f00ff
-
-/* TSGENERAL */
-#define	R367TER_TSGENERAL	0xf230
-#define	F367TER_TSGENERAL_7	0xf2300080
-#define	F367TER_TSGENERAL_6	0xf2300040
-#define	F367TER_TSFIFO_BCLK1aLL	0xf2300020
-#define	F367TER_TSGENERAL_4	0xf2300010
-#define	F367TER_MUXSTREAM_OUTMODE	0xf2300008
-#define	F367TER_TSFIFO_PERMPARAL	0xf2300006
-#define	F367TER_RST_REEDSOLO	0xf2300001
-
-/* RC1SPEED */
-#define	R367TER_RC1SPEED	0xf231
-#define	F367TER_TSRCFIFO1_OUTSPEED	0xf23100ff
-
-/* TSGSTATUS */
-#define	R367TER_TSGSTATUS	0xf232
-#define	F367TER_TSGSTATUS_7	0xf2320080
-#define	F367TER_TSGSTATUS_6	0xf2320040
-#define	F367TER_RSMEM_FULL	0xf2320020
-#define	F367TER_RS_MULTCALC	0xf2320010
-#define	F367TER_RSIN_OVERTIME	0xf2320008
-#define	F367TER_TSFIFO3_DEMODSEL	0xf2320004
-#define	F367TER_TSFIFO2_DEMODSEL	0xf2320002
-#define	F367TER_TSFIFO1_DEMODSEL	0xf2320001
-
-
-/* FECM */
-#define	R367TER_FECM	0xf233
-#define	F367TER_DSS_DVB	0xf2330080
-#define	F367TER_DEMOD_BYPASS	0xf2330040
-#define	F367TER_CMP_SLOWMODE	0xf2330020
-#define	F367TER_DSS_SRCH	0xf2330010
-#define	F367TER_FECM_3	0xf2330008
-#define	F367TER_DIFF_MODEVIT	0xf2330004
-#define	F367TER_SYNCVIT	0xf2330002
-#define	F367TER_I2CSYM	0xf2330001
-
-/* VTH12 */
-#define	R367TER_VTH12	0xf234
-#define	F367TER_VTH_12	0xf23400ff
-
-/* VTH23 */
-#define	R367TER_VTH23	0xf235
-#define	F367TER_VTH_23	0xf23500ff
-
-/* VTH34 */
-#define	R367TER_VTH34	0xf236
-#define	F367TER_VTH_34	0xf23600ff
-
-/* VTH56 */
-#define	R367TER_VTH56	0xf237
-#define	F367TER_VTH_56	0xf23700ff
-
-/* VTH67 */
-#define	R367TER_VTH67	0xf238
-#define	F367TER_VTH_67	0xf23800ff
-
-/* VTH78 */
-#define	R367TER_VTH78	0xf239
-#define	F367TER_VTH_78	0xf23900ff
-
-/* VITCURPUN */
-#define	R367TER_VITCURPUN	0xf23a
-#define	F367TER_VIT_MAPPING	0xf23a00e0
-#define	F367TER_VIT_CURPUN	0xf23a001f
-
-/* VERROR */
-#define	R367TER_VERROR	0xf23b
-#define	F367TER_REGERR_VIT	0xf23b00ff
-
-/* PRVIT */
-#define	R367TER_PRVIT	0xf23c
-#define	F367TER_PRVIT_7	0xf23c0080
-#define	F367TER_DIS_VTHLOCK	0xf23c0040
-#define	F367TER_E7_8VIT	0xf23c0020
-#define	F367TER_E6_7VIT	0xf23c0010
-#define	F367TER_E5_6VIT	0xf23c0008
-#define	F367TER_E3_4VIT	0xf23c0004
-#define	F367TER_E2_3VIT	0xf23c0002
-#define	F367TER_E1_2VIT	0xf23c0001
-
-/* VAVSRVIT */
-#define	R367TER_VAVSRVIT	0xf23d
-#define	F367TER_AMVIT	0xf23d0080
-#define	F367TER_FROZENVIT	0xf23d0040
-#define	F367TER_SNVIT	0xf23d0030
-#define	F367TER_TOVVIT	0xf23d000c
-#define	F367TER_HYPVIT	0xf23d0003
-
-/* VSTATUSVIT */
-#define	R367TER_VSTATUSVIT	0xf23e
-#define	F367TER_VITERBI_ON	0xf23e0080
-#define	F367TER_END_LOOPVIT	0xf23e0040
-#define	F367TER_VITERBI_DEPRF	0xf23e0020
-#define	F367TER_PRFVIT	0xf23e0010
-#define	F367TER_LOCKEDVIT	0xf23e0008
-#define	F367TER_VITERBI_DELOCK	0xf23e0004
-#define	F367TER_VIT_DEMODSEL	0xf23e0002
-#define	F367TER_VITERBI_COMPOUT	0xf23e0001
-
-/* VTHINUSE */
-#define	R367TER_VTHINUSE	0xf23f
-#define	F367TER_VIT_INUSE	0xf23f00ff
-
-/* KDIV12 */
-#define	R367TER_KDIV12	0xf240
-#define	F367TER_KDIV12_MANUAL	0xf2400080
-#define	F367TER_K_DIVIDER_12	0xf240007f
-
-/* KDIV23 */
-#define	R367TER_KDIV23	0xf241
-#define	F367TER_KDIV23_MANUAL	0xf2410080
-#define	F367TER_K_DIVIDER_23	0xf241007f
-
-/* KDIV34 */
-#define	R367TER_KDIV34	0xf242
-#define	F367TER_KDIV34_MANUAL	0xf2420080
-#define	F367TER_K_DIVIDER_34	0xf242007f
-
-/* KDIV56 */
-#define	R367TER_KDIV56	0xf243
-#define	F367TER_KDIV56_MANUAL	0xf2430080
-#define	F367TER_K_DIVIDER_56	0xf243007f
-
-/* KDIV67 */
-#define	R367TER_KDIV67	0xf244
-#define	F367TER_KDIV67_MANUAL	0xf2440080
-#define	F367TER_K_DIVIDER_67	0xf244007f
-
-/* KDIV78 */
-#define	R367TER_KDIV78	0xf245
-#define	F367TER_KDIV78_MANUAL	0xf2450080
-#define	F367TER_K_DIVIDER_78	0xf245007f
-
-/* SIGPOWER */
-#define	R367TER_SIGPOWER	0xf246
-#define	F367TER_SIGPOWER_MANUAL	0xf2460080
-#define	F367TER_SIG_POWER	0xf246007f
-
-/* DEMAPVIT */
-#define	R367TER_DEMAPVIT	0xf247
-#define	F367TER_DEMAPVIT_7	0xf2470080
-#define	F367TER_K_DIVIDER_VIT	0xf247007f
-
-/* VITSCALE */
-#define	R367TER_VITSCALE	0xf248
-#define	F367TER_NVTH_NOSRANGE	0xf2480080
-#define	F367TER_VERROR_MAXMODE	0xf2480040
-#define	F367TER_KDIV_MODE	0xf2480030
-#define	F367TER_NSLOWSN_LOCKED	0xf2480008
-#define	F367TER_DELOCK_PRFLOSS	0xf2480004
-#define	F367TER_DIS_RSFLOCK	0xf2480002
-#define	F367TER_VITSCALE_0	0xf2480001
-
-/* FFEC1PRG */
-#define	R367TER_FFEC1PRG	0xf249
-#define	F367TER_FDSS_DVB	0xf2490080
-#define	F367TER_FDSS_SRCH	0xf2490040
-#define	F367TER_FFECPROG_5	0xf2490020
-#define	F367TER_FFECPROG_4	0xf2490010
-#define	F367TER_FFECPROG_3	0xf2490008
-#define	F367TER_FFECPROG_2	0xf2490004
-#define	F367TER_FTS1_DISABLE	0xf2490002
-#define	F367TER_FTS2_DISABLE	0xf2490001
-
-/* FVITCURPUN */
-#define	R367TER_FVITCURPUN	0xf24a
-#define	F367TER_FVIT_MAPPING	0xf24a00e0
-#define	F367TER_FVIT_CURPUN	0xf24a001f
-
-/* FVERROR */
-#define	R367TER_FVERROR	0xf24b
-#define	F367TER_FREGERR_VIT	0xf24b00ff
-
-/* FVSTATUSVIT */
-#define	R367TER_FVSTATUSVIT	0xf24c
-#define	F367TER_FVITERBI_ON	0xf24c0080
-#define	F367TER_F1END_LOOPVIT	0xf24c0040
-#define	F367TER_FVITERBI_DEPRF	0xf24c0020
-#define	F367TER_FPRFVIT	0xf24c0010
-#define	F367TER_FLOCKEDVIT	0xf24c0008
-#define	F367TER_FVITERBI_DELOCK	0xf24c0004
-#define	F367TER_FVIT_DEMODSEL	0xf24c0002
-#define	F367TER_FVITERBI_COMPOUT	0xf24c0001
-
-/* DEBUG_LT1 */
-#define	R367TER_DEBUG_LT1	0xf24d
-#define	F367TER_DBG_LT1	0xf24d00ff
-
-/* DEBUG_LT2 */
-#define	R367TER_DEBUG_LT2	0xf24e
-#define	F367TER_DBG_LT2	0xf24e00ff
-
-/* DEBUG_LT3 */
-#define	R367TER_DEBUG_LT3	0xf24f
-#define	F367TER_DBG_LT3	0xf24f00ff
-
-/*	TSTSFMET */
-#define	R367TER_TSTSFMET	0xf250
-#define F367TER_TSTSFEC_METRIQUES	0xf25000ff
-
-/*	SELOUT */
-#define	R367TER_SELOUT	0xf252
-#define	F367TER_EN_SYNC	0xf2520080
-#define	F367TER_EN_TBUSDEMAP	0xf2520040
-#define	F367TER_SELOUT_5	0xf2520020
-#define	F367TER_SELOUT_4	0xf2520010
-#define	F367TER_TSTSYNCHRO_MODE	0xf2520002
-
-/*	TSYNC */
-#define R367TER_TSYNC	0xf253
-#define F367TER_CURPUN_INCMODE	0xf2530080
-#define F367TER_CERR_TSTMODE	0xf2530040
-#define F367TER_SHIFTSOF_MODE	0xf2530030
-#define F367TER_SLOWPHA_MODE	0xf2530008
-#define F367TER_PXX_BYPALL	0xf2530004
-#define F367TER_FROTA45_FIRST	0xf2530002
-#define F367TER_TST_BCHERROR	0xf2530001
-
-/*	TSTERR */
-#define R367TER_TSTERR	0xf254
-#define F367TER_TST_LONGPKT	0xf2540080
-#define F367TER_TST_ISSYION	0xf2540040
-#define F367TER_TST_NPDON	0xf2540020
-#define F367TER_TSTERR_4	0xf2540010
-#define F367TER_TRACEBACK_MODE	0xf2540008
-#define F367TER_TST_RSPARITY	0xf2540004
-#define F367TER_METRIQUE_MODE	0xf2540003
-
-/*	TSFSYNC */
-#define R367TER_TSFSYNC	0xf255
-#define F367TER_EN_SFECSYNC	0xf2550080
-#define F367TER_EN_SFECDEMAP	0xf2550040
-#define F367TER_SFCERR_TSTMODE	0xf2550020
-#define F367TER_SFECPXX_BYPALL	0xf2550010
-#define F367TER_SFECTSTSYNCHRO_MODE 0xf255000f
-
-/*	TSTSFERR */
-#define R367TER_TSTSFERR	0xf256
-#define F367TER_TSTSTERR_7	0xf2560080
-#define F367TER_TSTSTERR_6	0xf2560040
-#define F367TER_TSTSTERR_5	0xf2560020
-#define F367TER_TSTSTERR_4	0xf2560010
-#define F367TER_SFECTRACEBACK_MODE	0xf2560008
-#define F367TER_SFEC_NCONVPROG	0xf2560004
-#define F367TER_SFECMETRIQUE_MODE	0xf2560003
-
-/*	TSTTSSF1 */
-#define R367TER_TSTTSSF1	0xf258
-#define F367TER_TSTERSSF	0xf2580080
-#define F367TER_TSTTSSFEN	0xf2580040
-#define F367TER_SFEC_OUTMODE	0xf2580030
-#define F367TER_XLSF_NOFTHRESHOLD  0xf2580008
-#define F367TER_TSTTSSF_STACKSEL	0xf2580007
-
-/*	TSTTSSF2 */
-#define R367TER_TSTTSSF2	0xf259
-#define F367TER_DILSF_DBBHEADER	0xf2590080
-#define F367TER_TSTTSSF_DISBUG	0xf2590040
-#define F367TER_TSTTSSF_NOBADSTART	0xf2590020
-#define F367TER_TSTTSSF_SELECT	0xf259001f
-
-/*	TSTTSSF3 */
-#define R367TER_TSTTSSF3	0xf25a
-#define F367TER_TSTTSSF3_7	0xf25a0080
-#define F367TER_TSTTSSF3_6	0xf25a0040
-#define F367TER_TSTTSSF3_5	0xf25a0020
-#define F367TER_TSTTSSF3_4	0xf25a0010
-#define F367TER_TSTTSSF3_3	0xf25a0008
-#define F367TER_TSTTSSF3_2	0xf25a0004
-#define F367TER_TSTTSSF3_1	0xf25a0002
-#define F367TER_DISSF_CLKENABLE	0xf25a0001
-
-/*	TSTTS1 */
-#define R367TER_TSTTS1	0xf25c
-#define F367TER_TSTERS	0xf25c0080
-#define F367TER_TSFIFO_DSSSYNCB	0xf25c0040
-#define F367TER_TSTTS_FSPYBEFRS	0xf25c0020
-#define F367TER_NFORCE_SYNCBYTE	0xf25c0010
-#define F367TER_XL_NOFTHRESHOLD	0xf25c0008
-#define F367TER_TSTTS_FRFORCEPKT	0xf25c0004
-#define F367TER_DESCR_NOTAUTO	0xf25c0002
-#define F367TER_TSTTSEN	0xf25c0001
-
-/*	TSTTS2 */
-#define R367TER_TSTTS2	0xf25d
-#define F367TER_DIL_DBBHEADER	0xf25d0080
-#define F367TER_TSTTS_NOBADXXX	0xf25d0040
-#define F367TER_TSFIFO_DELSPEEDUP	0xf25d0020
-#define F367TER_TSTTS_SELECT	0xf25d001f
-
-/*	TSTTS3 */
-#define R367TER_TSTTS3	0xf25e
-#define F367TER_TSTTS_NOPKTGAIN	0xf25e0080
-#define F367TER_TSTTS_NOPKTENE	0xf25e0040
-#define F367TER_TSTTS_ISOLATION	0xf25e0020
-#define F367TER_TSTTS_DISBUG	0xf25e0010
-#define F367TER_TSTTS_NOBADSTART	0xf25e0008
-#define F367TER_TSTTS_STACKSEL	0xf25e0007
-
-/*	TSTTS4 */
-#define R367TER_TSTTS4	0xf25f
-#define F367TER_TSTTS4_7	0xf25f0080
-#define F367TER_TSTTS4_6	0xf25f0040
-#define F367TER_TSTTS4_5	0xf25f0020
-#define F367TER_TSTTS_DISDSTATE	0xf25f0010
-#define F367TER_TSTTS_FASTNOSYNC	0xf25f0008
-#define F367TER_EXT_FECSPYIN	0xf25f0004
-#define F367TER_TSTTS_NODPZERO	0xf25f0002
-#define F367TER_TSTTS_NODIV3	0xf25f0001
-
-/*	TSTTSRC */
-#define R367TER_TSTTSRC	0xf26c
-#define F367TER_TSTTSRC_7	0xf26c0080
-#define F367TER_TSRCFIFO_DSSSYNCB	0xf26c0040
-#define F367TER_TSRCFIFO_DPUNACTIVE	0xf26c0020
-#define F367TER_TSRCFIFO_DELSPEEDUP	0xf26c0010
-#define F367TER_TSTTSRC_NODIV3	0xf26c0008
-#define F367TER_TSTTSRC_FRFORCEPKT	0xf26c0004
-#define F367TER_SAT25_SDDORIGINE	0xf26c0002
-#define F367TER_TSTTSRC_INACTIVE	0xf26c0001
-
-/*	TSTTSRS */
-#define R367TER_TSTTSRS	0xf26d
-#define F367TER_TSTTSRS_7	0xf26d0080
-#define F367TER_TSTTSRS_6	0xf26d0040
-#define F367TER_TSTTSRS_5	0xf26d0020
-#define F367TER_TSTTSRS_4	0xf26d0010
-#define F367TER_TSTTSRS_3	0xf26d0008
-#define F367TER_TSTTSRS_2	0xf26d0004
-#define F367TER_TSTRS_DISRS2	0xf26d0002
-#define F367TER_TSTRS_DISRS1	0xf26d0001
-
-/* TSSTATEM */
-#define	R367TER_TSSTATEM	0xf270
-#define	F367TER_TSDIL_ON	0xf2700080
-#define	F367TER_TSSKIPRS_ON	0xf2700040
-#define	F367TER_TSRS_ON	0xf2700020
-#define	F367TER_TSDESCRAMB_ON	0xf2700010
-#define	F367TER_TSFRAME_MODE	0xf2700008
-#define	F367TER_TS_DISABLE	0xf2700004
-#define	F367TER_TSACM_MODE	0xf2700002
-#define	F367TER_TSOUT_NOSYNC	0xf2700001
-
-/* TSSTATEL */
-#define	R367TER_TSSTATEL	0xf271
-#define	F367TER_TSNOSYNCBYTE	0xf2710080
-#define	F367TER_TSPARITY_ON	0xf2710040
-#define	F367TER_TSSYNCOUTRS_ON	0xf2710020
-#define	F367TER_TSDVBS2_MODE	0xf2710010
-#define	F367TER_TSISSYI_ON	0xf2710008
-#define	F367TER_TSNPD_ON	0xf2710004
-#define	F367TER_TSCRC8_ON	0xf2710002
-#define	F367TER_TSDSS_PACKET	0xf2710001
-
-/* TSCFGH */
-#define	R367TER_TSCFGH	0xf272
-#define	F367TER_TSFIFO_DVBCI	0xf2720080
-#define	F367TER_TSFIFO_SERIAL	0xf2720040
-#define	F367TER_TSFIFO_TEIUPDATE	0xf2720020
-#define	F367TER_TSFIFO_DUTY50	0xf2720010
-#define	F367TER_TSFIFO_HSGNLOUT	0xf2720008
-#define	F367TER_TSFIFO_ERRMODE	0xf2720006
-#define	F367TER_RST_HWARE	0xf2720001
-
-/* TSCFGM */
-#define	R367TER_TSCFGM	0xf273
-#define	F367TER_TSFIFO_MANSPEED	0xf27300c0
-#define	F367TER_TSFIFO_PERMDATA	0xf2730020
-#define	F367TER_TSFIFO_NONEWSGNL	0xf2730010
-#define	F367TER_TSFIFO_BITSPEED	0xf2730008
-#define	F367TER_NPD_SPECDVBS2	0xf2730004
-#define	F367TER_TSFIFO_STOPCKDIS	0xf2730002
-#define	F367TER_TSFIFO_INVDATA	0xf2730001
-
-/* TSCFGL */
-#define	R367TER_TSCFGL	0xf274
-#define	F367TER_TSFIFO_BCLKDEL1cK	0xf27400c0
-#define	F367TER_BCHERROR_MODE	0xf2740030
-#define	F367TER_TSFIFO_NSGNL2dATA	0xf2740008
-#define	F367TER_TSFIFO_EMBINDVB	0xf2740004
-#define	F367TER_TSFIFO_DPUNACT	0xf2740002
-#define	F367TER_TSFIFO_NPDOFF	0xf2740001
-
-/* TSSYNC */
-#define	R367TER_TSSYNC	0xf275
-#define	F367TER_TSFIFO_PERMUTE	0xf2750080
-#define	F367TER_TSFIFO_FISCR3B	0xf2750060
-#define	F367TER_TSFIFO_SYNCMODE	0xf2750018
-#define	F367TER_TSFIFO_SYNCSEL	0xf2750007
-
-/* TSINSDELH */
-#define	R367TER_TSINSDELH	0xf276
-#define	F367TER_TSDEL_SYNCBYTE	0xf2760080
-#define	F367TER_TSDEL_XXHEADER	0xf2760040
-#define	F367TER_TSDEL_BBHEADER	0xf2760020
-#define	F367TER_TSDEL_DATAFIELD	0xf2760010
-#define	F367TER_TSINSDEL_ISCR	0xf2760008
-#define	F367TER_TSINSDEL_NPD	0xf2760004
-#define	F367TER_TSINSDEL_RSPARITY	0xf2760002
-#define	F367TER_TSINSDEL_CRC8	0xf2760001
-
-/* TSINSDELM */
-#define	R367TER_TSINSDELM	0xf277
-#define	F367TER_TSINS_BBPADDING	0xf2770080
-#define	F367TER_TSINS_BCHFEC	0xf2770040
-#define	F367TER_TSINS_LDPCFEC	0xf2770020
-#define	F367TER_TSINS_EMODCOD	0xf2770010
-#define	F367TER_TSINS_TOKEN	0xf2770008
-#define	F367TER_TSINS_XXXERR	0xf2770004
-#define	F367TER_TSINS_MATYPE	0xf2770002
-#define	F367TER_TSINS_UPL	0xf2770001
-
-/* TSINSDELL */
-#define	R367TER_TSINSDELL	0xf278
-#define	F367TER_TSINS_DFL	0xf2780080
-#define	F367TER_TSINS_SYNCD	0xf2780040
-#define	F367TER_TSINS_BLOCLEN	0xf2780020
-#define	F367TER_TSINS_SIGPCOUNT	0xf2780010
-#define	F367TER_TSINS_FIFO	0xf2780008
-#define	F367TER_TSINS_REALPACK	0xf2780004
-#define	F367TER_TSINS_TSCONFIG	0xf2780002
-#define	F367TER_TSINS_LATENCY	0xf2780001
-
-/* TSDIVN */
-#define	R367TER_TSDIVN	0xf279
-#define	F367TER_TSFIFO_LOWSPEED	0xf2790080
-#define	F367TER_BYTE_OVERSAMPLING	0xf2790070
-#define	F367TER_TSMANUAL_PACKETNBR	0xf279000f
-
-/* TSDIVPM */
-#define	R367TER_TSDIVPM	0xf27a
-#define	F367TER_TSMANUAL_P_HI	0xf27a00ff
-
-/* TSDIVPL */
-#define	R367TER_TSDIVPL	0xf27b
-#define	F367TER_TSMANUAL_P_LO	0xf27b00ff
-
-/* TSDIVQM */
-#define	R367TER_TSDIVQM	0xf27c
-#define	F367TER_TSMANUAL_Q_HI	0xf27c00ff
-
-/* TSDIVQL */
-#define	R367TER_TSDIVQL	0xf27d
-#define	F367TER_TSMANUAL_Q_LO	0xf27d00ff
-
-/* TSDILSTKM */
-#define	R367TER_TSDILSTKM	0xf27e
-#define	F367TER_TSFIFO_DILSTK_HI	0xf27e00ff
-
-/* TSDILSTKL */
-#define	R367TER_TSDILSTKL	0xf27f
-#define	F367TER_TSFIFO_DILSTK_LO	0xf27f00ff
-
-/* TSSPEED */
-#define	R367TER_TSSPEED	0xf280
-#define	F367TER_TSFIFO_OUTSPEED	0xf28000ff
-
-/* TSSTATUS */
-#define	R367TER_TSSTATUS	0xf281
-#define	F367TER_TSFIFO_LINEOK	0xf2810080
-#define	F367TER_TSFIFO_ERROR	0xf2810040
-#define	F367TER_TSFIFO_DATA7	0xf2810020
-#define	F367TER_TSFIFO_NOSYNC	0xf2810010
-#define	F367TER_ISCR_INITIALIZED	0xf2810008
-#define	F367TER_ISCR_UPDATED	0xf2810004
-#define	F367TER_SOFFIFO_UNREGUL	0xf2810002
-#define	F367TER_DIL_READY	0xf2810001
-
-/* TSSTATUS2 */
-#define	R367TER_TSSTATUS2	0xf282
-#define	F367TER_TSFIFO_DEMODSEL	0xf2820080
-#define	F367TER_TSFIFOSPEED_STORE	0xf2820040
-#define	F367TER_DILXX_RESET	0xf2820020
-#define	F367TER_TSSERIAL_IMPOSSIBLE	0xf2820010
-#define	F367TER_TSFIFO_UNDERSPEED	0xf2820008
-#define	F367TER_BITSPEED_EVENT	0xf2820004
-#define	F367TER_UL_SCRAMBDETECT	0xf2820002
-#define	F367TER_ULDTV67_FALSELOCK	0xf2820001
-
-/* TSBITRATEM */
-#define	R367TER_TSBITRATEM	0xf283
-#define	F367TER_TSFIFO_BITRATE_HI	0xf28300ff
-
-/* TSBITRATEL */
-#define	R367TER_TSBITRATEL	0xf284
-#define	F367TER_TSFIFO_BITRATE_LO	0xf28400ff
-
-/* TSPACKLENM */
-#define	R367TER_TSPACKLENM	0xf285
-#define	F367TER_TSFIFO_PACKCPT	0xf28500e0
-#define	F367TER_DIL_RPLEN_HI	0xf285001f
-
-/* TSPACKLENL */
-#define	R367TER_TSPACKLENL	0xf286
-#define	F367TER_DIL_RPLEN_LO	0xf28600ff
-
-/* TSBLOCLENM */
-#define	R367TER_TSBLOCLENM	0xf287
-#define	F367TER_TSFIFO_PFLEN_HI	0xf28700ff
-
-/* TSBLOCLENL */
-#define	R367TER_TSBLOCLENL	0xf288
-#define	F367TER_TSFIFO_PFLEN_LO	0xf28800ff
-
-/* TSDLYH */
-#define	R367TER_TSDLYH	0xf289
-#define	F367TER_SOFFIFO_TSTIMEVALID	0xf2890080
-#define	F367TER_SOFFIFO_SPEEDUP	0xf2890040
-#define	F367TER_SOFFIFO_STOP	0xf2890020
-#define	F367TER_SOFFIFO_REGULATED	0xf2890010
-#define	F367TER_SOFFIFO_REALSBOFF_HI	0xf289000f
-
-/* TSDLYM */
-#define	R367TER_TSDLYM	0xf28a
-#define	F367TER_SOFFIFO_REALSBOFF_MED	0xf28a00ff
-
-/* TSDLYL */
-#define	R367TER_TSDLYL	0xf28b
-#define	F367TER_SOFFIFO_REALSBOFF_LO	0xf28b00ff
-
-/* TSNPDAV */
-#define	R367TER_TSNPDAV	0xf28c
-#define	F367TER_TSNPD_AVERAGE	0xf28c00ff
-
-/* TSBUFSTATH */
-#define	R367TER_TSBUFSTATH	0xf28d
-#define	F367TER_TSISCR_3BYTES	0xf28d0080
-#define	F367TER_TSISCR_NEWDATA	0xf28d0040
-#define	F367TER_TSISCR_BUFSTAT_HI	0xf28d003f
-
-/* TSBUFSTATM */
-#define	R367TER_TSBUFSTATM	0xf28e
-#define	F367TER_TSISCR_BUFSTAT_MED	0xf28e00ff
-
-/* TSBUFSTATL */
-#define	R367TER_TSBUFSTATL	0xf28f
-#define	F367TER_TSISCR_BUFSTAT_LO	0xf28f00ff
-
-/* TSDEBUGM */
-#define	R367TER_TSDEBUGM	0xf290
-#define	F367TER_TSFIFO_ILLPACKET	0xf2900080
-#define	F367TER_DIL_NOSYNC	0xf2900040
-#define	F367TER_DIL_ISCR	0xf2900020
-#define	F367TER_DILOUT_BSYNCB	0xf2900010
-#define	F367TER_TSFIFO_EMPTYPKT	0xf2900008
-#define	F367TER_TSFIFO_EMPTYRD	0xf2900004
-#define	F367TER_SOFFIFO_STOPM	0xf2900002
-#define	F367TER_SOFFIFO_SPEEDUPM	0xf2900001
-
-/* TSDEBUGL */
-#define	R367TER_TSDEBUGL	0xf291
-#define	F367TER_TSFIFO_PACKLENFAIL	0xf2910080
-#define	F367TER_TSFIFO_SYNCBFAIL	0xf2910040
-#define	F367TER_TSFIFO_VITLIBRE	0xf2910020
-#define	F367TER_TSFIFO_BOOSTSPEEDM	0xf2910010
-#define	F367TER_TSFIFO_UNDERSPEEDM	0xf2910008
-#define	F367TER_TSFIFO_ERROR_EVNT	0xf2910004
-#define	F367TER_TSFIFO_FULL	0xf2910002
-#define	F367TER_TSFIFO_OVERFLOWM	0xf2910001
-
-/* TSDLYSETH */
-#define	R367TER_TSDLYSETH	0xf292
-#define	F367TER_SOFFIFO_OFFSET	0xf29200e0
-#define	F367TER_SOFFIFO_SYMBOFFSET_HI	0xf292001f
-
-/* TSDLYSETM */
-#define	R367TER_TSDLYSETM	0xf293
-#define	F367TER_SOFFIFO_SYMBOFFSET_MED	0xf29300ff
-
-/* TSDLYSETL */
-#define	R367TER_TSDLYSETL	0xf294
-#define	F367TER_SOFFIFO_SYMBOFFSET_LO	0xf29400ff
-
-/* TSOBSCFG */
-#define	R367TER_TSOBSCFG	0xf295
-#define	F367TER_TSFIFO_OBSCFG	0xf29500ff
-
-/* TSOBSM */
-#define	R367TER_TSOBSM	0xf296
-#define	F367TER_TSFIFO_OBSDATA_HI	0xf29600ff
-
-/* TSOBSL */
-#define	R367TER_TSOBSL	0xf297
-#define	F367TER_TSFIFO_OBSDATA_LO	0xf29700ff
-
-/* ERRCTRL1 */
-#define	R367TER_ERRCTRL1	0xf298
-#define	F367TER_ERR_SRC1	0xf29800f0
-#define	F367TER_ERRCTRL1_3	0xf2980008
-#define	F367TER_NUM_EVT1	0xf2980007
-
-/* ERRCNT1H */
-#define	R367TER_ERRCNT1H	0xf299
-#define	F367TER_ERRCNT1_OLDVALUE	0xf2990080
-#define	F367TER_ERR_CNT1	0xf299007f
-
-/* ERRCNT1M */
-#define	R367TER_ERRCNT1M	0xf29a
-#define	F367TER_ERR_CNT1_HI	0xf29a00ff
-
-/* ERRCNT1L */
-#define	R367TER_ERRCNT1L	0xf29b
-#define	F367TER_ERR_CNT1_LO	0xf29b00ff
-
-/* ERRCTRL2 */
-#define	R367TER_ERRCTRL2	0xf29c
-#define	F367TER_ERR_SRC2	0xf29c00f0
-#define	F367TER_ERRCTRL2_3	0xf29c0008
-#define	F367TER_NUM_EVT2	0xf29c0007
-
-/* ERRCNT2H */
-#define	R367TER_ERRCNT2H	0xf29d
-#define	F367TER_ERRCNT2_OLDVALUE	0xf29d0080
-#define	F367TER_ERR_CNT2_HI	0xf29d007f
-
-/* ERRCNT2M */
-#define	R367TER_ERRCNT2M	0xf29e
-#define	F367TER_ERR_CNT2_MED	0xf29e00ff
-
-/* ERRCNT2L */
-#define	R367TER_ERRCNT2L	0xf29f
-#define	F367TER_ERR_CNT2_LO	0xf29f00ff
-
-/* FECSPY */
-#define	R367TER_FECSPY	0xf2a0
-#define	F367TER_SPY_ENABLE	0xf2a00080
-#define	F367TER_NO_SYNCBYTE	0xf2a00040
-#define	F367TER_SERIAL_MODE	0xf2a00020
-#define	F367TER_UNUSUAL_PACKET	0xf2a00010
-#define	F367TER_BERMETER_DATAMODE	0xf2a0000c
-#define	F367TER_BERMETER_LMODE	0xf2a00002
-#define	F367TER_BERMETER_RESET	0xf2a00001
-
-/* FSPYCFG */
-#define	R367TER_FSPYCFG	0xf2a1
-#define	F367TER_FECSPY_INPUT	0xf2a100c0
-#define	F367TER_RST_ON_ERROR	0xf2a10020
-#define	F367TER_ONE_SHOT	0xf2a10010
-#define	F367TER_I2C_MOD	0xf2a1000c
-#define	F367TER_SPY_HYSTERESIS	0xf2a10003
-
-/* FSPYDATA */
-#define	R367TER_FSPYDATA	0xf2a2
-#define	F367TER_SPY_STUFFING	0xf2a20080
-#define	F367TER_NOERROR_PKTJITTER	0xf2a20040
-#define	F367TER_SPY_CNULLPKT	0xf2a20020
-#define	F367TER_SPY_OUTDATA_MODE	0xf2a2001f
-
-/* FSPYOUT */
-#define	R367TER_FSPYOUT	0xf2a3
-#define	F367TER_FSPY_DIRECT	0xf2a30080
-#define	F367TER_FSPYOUT_6	0xf2a30040
-#define	F367TER_SPY_OUTDATA_BUS	0xf2a30038
-#define	F367TER_STUFF_MODE	0xf2a30007
-
-/* FSTATUS */
-#define	R367TER_FSTATUS	0xf2a4
-#define	F367TER_SPY_ENDSIM	0xf2a40080
-#define	F367TER_VALID_SIM	0xf2a40040
-#define	F367TER_FOUND_SIGNAL	0xf2a40020
-#define	F367TER_DSS_SYNCBYTE	0xf2a40010
-#define	F367TER_RESULT_STATE	0xf2a4000f
-
-/* FGOODPACK */
-#define	R367TER_FGOODPACK	0xf2a5
-#define	F367TER_FGOOD_PACKET	0xf2a500ff
-
-/* FPACKCNT */
-#define	R367TER_FPACKCNT	0xf2a6
-#define	F367TER_FPACKET_COUNTER	0xf2a600ff
-
-/* FSPYMISC */
-#define	R367TER_FSPYMISC	0xf2a7
-#define	F367TER_FLABEL_COUNTER	0xf2a700ff
-
-/* FBERCPT4 */
-#define	R367TER_FBERCPT4	0xf2a8
-#define	F367TER_FBERMETER_CPT5	0xf2a800ff
-
-/* FBERCPT3 */
-#define	R367TER_FBERCPT3	0xf2a9
-#define	F367TER_FBERMETER_CPT4	0xf2a900ff
-
-/* FBERCPT2 */
-#define	R367TER_FBERCPT2	0xf2aa
-#define	F367TER_FBERMETER_CPT3	0xf2aa00ff
-
-/* FBERCPT1 */
-#define	R367TER_FBERCPT1	0xf2ab
-#define	F367TER_FBERMETER_CPT2	0xf2ab00ff
-
-/* FBERCPT0 */
-#define	R367TER_FBERCPT0	0xf2ac
-#define	F367TER_FBERMETER_CPT1	0xf2ac00ff
-
-/* FBERERR2 */
-#define	R367TER_FBERERR2	0xf2ad
-#define	F367TER_FBERMETER_ERR_HI	0xf2ad00ff
-
-/* FBERERR1 */
-#define	R367TER_FBERERR1	0xf2ae
-#define	F367TER_FBERMETER_ERR_MED	0xf2ae00ff
-
-/* FBERERR0 */
-#define	R367TER_FBERERR0	0xf2af
-#define	F367TER_FBERMETER_ERR_LO	0xf2af00ff
-
-/* FSTATESM */
-#define	R367TER_FSTATESM	0xf2b0
-#define	F367TER_RSTATE_F	0xf2b00080
-#define	F367TER_RSTATE_E	0xf2b00040
-#define	F367TER_RSTATE_D	0xf2b00020
-#define	F367TER_RSTATE_C	0xf2b00010
-#define	F367TER_RSTATE_B	0xf2b00008
-#define	F367TER_RSTATE_A	0xf2b00004
-#define	F367TER_RSTATE_9	0xf2b00002
-#define	F367TER_RSTATE_8	0xf2b00001
-
-/* FSTATESL */
-#define	R367TER_FSTATESL	0xf2b1
-#define	F367TER_RSTATE_7	0xf2b10080
-#define	F367TER_RSTATE_6	0xf2b10040
-#define	F367TER_RSTATE_5	0xf2b10020
-#define	F367TER_RSTATE_4	0xf2b10010
-#define	F367TER_RSTATE_3	0xf2b10008
-#define	F367TER_RSTATE_2	0xf2b10004
-#define	F367TER_RSTATE_1	0xf2b10002
-#define	F367TER_RSTATE_0	0xf2b10001
-
-/* FSPYBER */
-#define	R367TER_FSPYBER	0xf2b2
-#define	F367TER_FSPYBER_7	0xf2b20080
-#define	F367TER_FSPYOBS_XORREAD	0xf2b20040
-#define	F367TER_FSPYBER_OBSMODE	0xf2b20020
-#define	F367TER_FSPYBER_SYNCBYTE	0xf2b20010
-#define	F367TER_FSPYBER_UNSYNC	0xf2b20008
-#define	F367TER_FSPYBER_CTIME	0xf2b20007
-
-/* FSPYDISTM */
-#define	R367TER_FSPYDISTM	0xf2b3
-#define	F367TER_PKTTIME_DISTANCE_HI	0xf2b300ff
-
-/* FSPYDISTL */
-#define	R367TER_FSPYDISTL	0xf2b4
-#define	F367TER_PKTTIME_DISTANCE_LO	0xf2b400ff
-
-/* FSPYOBS7 */
-#define	R367TER_FSPYOBS7	0xf2b8
-#define	F367TER_FSPYOBS_SPYFAIL	0xf2b80080
-#define	F367TER_FSPYOBS_SPYFAIL1	0xf2b80040
-#define	F367TER_FSPYOBS_ERROR	0xf2b80020
-#define	F367TER_FSPYOBS_STROUT	0xf2b80010
-#define	F367TER_FSPYOBS_RESULTSTATE1	0xf2b8000f
-
-/* FSPYOBS6 */
-#define	R367TER_FSPYOBS6	0xf2b9
-#define	F367TER_FSPYOBS_RESULTSTATe0	0xf2b900f0
-#define	F367TER_FSPYOBS_RESULTSTATEM1	0xf2b9000f
-
-/* FSPYOBS5 */
-#define	R367TER_FSPYOBS5	0xf2ba
-#define	F367TER_FSPYOBS_BYTEOFPACKET1	0xf2ba00ff
-
-/* FSPYOBS4 */
-#define	R367TER_FSPYOBS4	0xf2bb
-#define	F367TER_FSPYOBS_BYTEVALUE1	0xf2bb00ff
-
-/* FSPYOBS3 */
-#define	R367TER_FSPYOBS3	0xf2bc
-#define	F367TER_FSPYOBS_DATA1	0xf2bc00ff
-
-/* FSPYOBS2 */
-#define	R367TER_FSPYOBS2	0xf2bd
-#define	F367TER_FSPYOBS_DATa0	0xf2bd00ff
-
-/* FSPYOBS1 */
-#define	R367TER_FSPYOBS1	0xf2be
-#define	F367TER_FSPYOBS_DATAM1	0xf2be00ff
-
-/* FSPYOBS0 */
-#define	R367TER_FSPYOBS0	0xf2bf
-#define	F367TER_FSPYOBS_DATAM2	0xf2bf00ff
-
-/* SFDEMAP */
-#define	R367TER_SFDEMAP	0xf2c0
-#define	F367TER_SFDEMAP_7	0xf2c00080
-#define	F367TER_SFEC_K_DIVIDER_VIT	0xf2c0007f
-
-/* SFERROR */
-#define	R367TER_SFERROR	0xf2c1
-#define	F367TER_SFEC_REGERR_VIT	0xf2c100ff
-
-/* SFAVSR */
-#define	R367TER_SFAVSR	0xf2c2
-#define	F367TER_SFEC_SUMERRORS	0xf2c20080
-#define	F367TER_SERROR_MAXMODE	0xf2c20040
-#define	F367TER_SN_SFEC	0xf2c20030
-#define	F367TER_KDIV_MODE_SFEC	0xf2c2000c
-#define	F367TER_SFAVSR_1	0xf2c20002
-#define	F367TER_SFAVSR_0	0xf2c20001
-
-/* SFECSTATUS */
-#define	R367TER_SFECSTATUS	0xf2c3
-#define	F367TER_SFEC_ON	0xf2c30080
-#define	F367TER_SFSTATUS_6	0xf2c30040
-#define	F367TER_SFSTATUS_5	0xf2c30020
-#define	F367TER_SFSTATUS_4	0xf2c30010
-#define	F367TER_LOCKEDSFEC	0xf2c30008
-#define	F367TER_SFEC_DELOCK	0xf2c30004
-#define	F367TER_SFEC_DEMODSEL1	0xf2c30002
-#define	F367TER_SFEC_OVFON	0xf2c30001
-
-/* SFKDIV12 */
-#define	R367TER_SFKDIV12	0xf2c4
-#define	F367TER_SFECKDIV12_MAN	0xf2c40080
-#define	F367TER_SFEC_K_DIVIDER_12	0xf2c4007f
-
-/* SFKDIV23 */
-#define	R367TER_SFKDIV23	0xf2c5
-#define	F367TER_SFECKDIV23_MAN	0xf2c50080
-#define	F367TER_SFEC_K_DIVIDER_23	0xf2c5007f
-
-/* SFKDIV34 */
-#define	R367TER_SFKDIV34	0xf2c6
-#define	F367TER_SFECKDIV34_MAN	0xf2c60080
-#define	F367TER_SFEC_K_DIVIDER_34	0xf2c6007f
-
-/* SFKDIV56 */
-#define	R367TER_SFKDIV56	0xf2c7
-#define	F367TER_SFECKDIV56_MAN	0xf2c70080
-#define	F367TER_SFEC_K_DIVIDER_56	0xf2c7007f
-
-/* SFKDIV67 */
-#define	R367TER_SFKDIV67	0xf2c8
-#define	F367TER_SFECKDIV67_MAN	0xf2c80080
-#define	F367TER_SFEC_K_DIVIDER_67	0xf2c8007f
-
-/* SFKDIV78 */
-#define	R367TER_SFKDIV78	0xf2c9
-#define	F367TER_SFECKDIV78_MAN	0xf2c90080
-#define	F367TER_SFEC_K_DIVIDER_78	0xf2c9007f
-
-/* SFDILSTKM */
-#define	R367TER_SFDILSTKM	0xf2ca
-#define	F367TER_SFEC_PACKCPT	0xf2ca00e0
-#define	F367TER_SFEC_DILSTK_HI	0xf2ca001f
-
-/* SFDILSTKL */
-#define	R367TER_SFDILSTKL	0xf2cb
-#define	F367TER_SFEC_DILSTK_LO	0xf2cb00ff
-
-/* SFSTATUS */
-#define	R367TER_SFSTATUS	0xf2cc
-#define	F367TER_SFEC_LINEOK	0xf2cc0080
-#define	F367TER_SFEC_ERROR	0xf2cc0040
-#define	F367TER_SFEC_DATA7	0xf2cc0020
-#define	F367TER_SFEC_OVERFLOW	0xf2cc0010
-#define	F367TER_SFEC_DEMODSEL2	0xf2cc0008
-#define	F367TER_SFEC_NOSYNC	0xf2cc0004
-#define	F367TER_SFEC_UNREGULA	0xf2cc0002
-#define	F367TER_SFEC_READY	0xf2cc0001
-
-/* SFDLYH */
-#define	R367TER_SFDLYH	0xf2cd
-#define	F367TER_SFEC_TSTIMEVALID	0xf2cd0080
-#define	F367TER_SFEC_SPEEDUP	0xf2cd0040
-#define	F367TER_SFEC_STOP	0xf2cd0020
-#define	F367TER_SFEC_REGULATED	0xf2cd0010
-#define	F367TER_SFEC_REALSYMBOFFSET	0xf2cd000f
-
-/* SFDLYM */
-#define	R367TER_SFDLYM	0xf2ce
-#define	F367TER_SFEC_REALSYMBOFFSET_HI	0xf2ce00ff
-
-/* SFDLYL */
-#define	R367TER_SFDLYL	0xf2cf
-#define	F367TER_SFEC_REALSYMBOFFSET_LO	0xf2cf00ff
-
-/* SFDLYSETH */
-#define	R367TER_SFDLYSETH	0xf2d0
-#define	F367TER_SFEC_OFFSET	0xf2d000e0
-#define	F367TER_SFECDLYSETH_4	0xf2d00010
-#define	F367TER_RST_SFEC	0xf2d00008
-#define	F367TER_SFECDLYSETH_2	0xf2d00004
-#define	F367TER_SFEC_DISABLE	0xf2d00002
-#define	F367TER_SFEC_UNREGUL	0xf2d00001
-
-/* SFDLYSETM */
-#define	R367TER_SFDLYSETM	0xf2d1
-#define	F367TER_SFECDLYSETM_7	0xf2d10080
-#define	F367TER_SFEC_SYMBOFFSET_HI	0xf2d1007f
-
-/* SFDLYSETL */
-#define	R367TER_SFDLYSETL	0xf2d2
-#define	F367TER_SFEC_SYMBOFFSET_LO	0xf2d200ff
-
-/* SFOBSCFG */
-#define	R367TER_SFOBSCFG	0xf2d3
-#define	F367TER_SFEC_OBSCFG	0xf2d300ff
-
-/* SFOBSM */
-#define	R367TER_SFOBSM	0xf2d4
-#define	F367TER_SFEC_OBSDATA_HI	0xf2d400ff
-
-/* SFOBSL */
-#define	R367TER_SFOBSL	0xf2d5
-#define	F367TER_SFEC_OBSDATA_LO	0xf2d500ff
-
-/* SFECINFO */
-#define	R367TER_SFECINFO	0xf2d6
-#define	F367TER_SFECINFO_7	0xf2d60080
-#define	F367TER_SFEC_SYNCDLSB	0xf2d60070
-#define	F367TER_SFCE_S1cPHASE	0xf2d6000f
-
-/* SFERRCTRL */
-#define	R367TER_SFERRCTRL	0xf2d8
-#define	F367TER_SFEC_ERR_SOURCE	0xf2d800f0
-#define	F367TER_SFERRCTRL_3	0xf2d80008
-#define	F367TER_SFEC_NUM_EVENT	0xf2d80007
-
-/* SFERRCNTH */
-#define	R367TER_SFERRCNTH	0xf2d9
-#define	F367TER_SFERRC_OLDVALUE	0xf2d90080
-#define	F367TER_SFEC_ERR_CNT	0xf2d9007f
-
-/* SFERRCNTM */
-#define	R367TER_SFERRCNTM	0xf2da
-#define	F367TER_SFEC_ERR_CNT_HI	0xf2da00ff
-
-/* SFERRCNTL */
-#define	R367TER_SFERRCNTL	0xf2db
-#define	F367TER_SFEC_ERR_CNT_LO	0xf2db00ff
-
-/* SYMBRATEM */
-#define	R367TER_SYMBRATEM	0xf2e0
-#define	F367TER_DEFGEN_SYMBRATE_HI	0xf2e000ff
-
-/* SYMBRATEL */
-#define	R367TER_SYMBRATEL	0xf2e1
-#define	F367TER_DEFGEN_SYMBRATE_LO	0xf2e100ff
-
-/* SYMBSTATUS */
-#define	R367TER_SYMBSTATUS	0xf2e2
-#define	F367TER_SYMBDLINE2_OFF	0xf2e20080
-#define	F367TER_SDDL_REINIT1	0xf2e20040
-#define	F367TER_SDD_REINIT1	0xf2e20020
-#define	F367TER_TOKENID_ERROR	0xf2e20010
-#define	F367TER_SYMBRATE_OVERFLOW	0xf2e20008
-#define	F367TER_SYMBRATE_UNDERFLOW	0xf2e20004
-#define	F367TER_TOKENID_RSTEVENT	0xf2e20002
-#define	F367TER_TOKENID_RESET1	0xf2e20001
-
-/* SYMBCFG */
-#define	R367TER_SYMBCFG	0xf2e3
-#define	F367TER_SYMBCFG_7	0xf2e30080
-#define	F367TER_SYMBCFG_6	0xf2e30040
-#define	F367TER_SYMBCFG_5	0xf2e30020
-#define	F367TER_SYMBCFG_4	0xf2e30010
-#define	F367TER_SYMRATE_FSPEED	0xf2e3000c
-#define	F367TER_SYMRATE_SSPEED	0xf2e30003
-
-/* SYMBFIFOM */
-#define	R367TER_SYMBFIFOM	0xf2e4
-#define	F367TER_SYMBFIFOM_7	0xf2e40080
-#define	F367TER_SYMBFIFOM_6	0xf2e40040
-#define	F367TER_DEFGEN_SYMFIFO_HI	0xf2e4003f
-
-/* SYMBFIFOL */
-#define	R367TER_SYMBFIFOL	0xf2e5
-#define	F367TER_DEFGEN_SYMFIFO_LO	0xf2e500ff
-
-/* SYMBOFFSM */
-#define	R367TER_SYMBOFFSM	0xf2e6
-#define	F367TER_TOKENID_RESET2	0xf2e60080
-#define	F367TER_SDDL_REINIT2	0xf2e60040
-#define	F367TER_SDD_REINIT2	0xf2e60020
-#define	F367TER_SYMBOFFSM_4	0xf2e60010
-#define	F367TER_SYMBOFFSM_3	0xf2e60008
-#define	F367TER_DEFGEN_SYMBOFFSET_HI	0xf2e60007
-
-/* SYMBOFFSL */
-#define	R367TER_SYMBOFFSL	0xf2e7
-#define	F367TER_DEFGEN_SYMBOFFSET_LO	0xf2e700ff
-
-/* DEBUG_LT4 */
-#define	R367TER_DEBUG_LT4	0xf400
-#define	F367TER_F_DEBUG_LT4	0xf40000ff
-
-/* DEBUG_LT5 */
-#define	R367TER_DEBUG_LT5	0xf401
-#define	F367TER_F_DEBUG_LT5	0xf40100ff
-
-/* DEBUG_LT6 */
-#define	R367TER_DEBUG_LT6	0xf402
-#define	F367TER_F_DEBUG_LT6	0xf40200ff
-
-/* DEBUG_LT7 */
-#define	R367TER_DEBUG_LT7	0xf403
-#define	F367TER_F_DEBUG_LT7	0xf40300ff
-
-/* DEBUG_LT8 */
-#define	R367TER_DEBUG_LT8	0xf404
-#define	F367TER_F_DEBUG_LT8	0xf40400ff
-
-/* DEBUG_LT9 */
-#define	R367TER_DEBUG_LT9	0xf405
-#define	F367TER_F_DEBUG_LT9	0xf40500ff
-
-#define STV0367TER_NBREGS	445
-
-/* ID */
-#define	R367CAB_ID	0xf000
-#define	F367CAB_IDENTIFICATIONREGISTER	0xf00000ff
-
-/* I2CRPT */
-#define	R367CAB_I2CRPT	0xf001
-#define	F367CAB_I2CT_ON	0xf0010080
-#define	F367CAB_ENARPT_LEVEL	0xf0010070
-#define	F367CAB_SCLT_DELAY	0xf0010008
-#define	F367CAB_SCLT_NOD	0xf0010004
-#define	F367CAB_STOP_ENABLE	0xf0010002
-#define	F367CAB_SDAT_NOD	0xf0010001
-
-/* TOPCTRL */
-#define	R367CAB_TOPCTRL	0xf002
-#define	F367CAB_STDBY	0xf0020080
-#define	F367CAB_STDBY_CORE	0xf0020020
-#define	F367CAB_QAM_COFDM	0xf0020010
-#define	F367CAB_TS_DIS	0xf0020008
-#define	F367CAB_DIR_CLK_216	0xf0020004
-
-/* IOCFG0 */
-#define	R367CAB_IOCFG0	0xf003
-#define	F367CAB_OP0_SD	0xf0030080
-#define	F367CAB_OP0_VAL	0xf0030040
-#define	F367CAB_OP0_OD	0xf0030020
-#define	F367CAB_OP0_INV	0xf0030010
-#define	F367CAB_OP0_DACVALUE_HI	0xf003000f
-
-/* DAc0R */
-#define	R367CAB_DAC0R	0xf004
-#define	F367CAB_OP0_DACVALUE_LO	0xf00400ff
-
-/* IOCFG1 */
-#define	R367CAB_IOCFG1	0xf005
-#define	F367CAB_IP0	0xf0050040
-#define	F367CAB_OP1_OD	0xf0050020
-#define	F367CAB_OP1_INV	0xf0050010
-#define	F367CAB_OP1_DACVALUE_HI	0xf005000f
-
-/* DAC1R */
-#define	R367CAB_DAC1R	0xf006
-#define	F367CAB_OP1_DACVALUE_LO	0xf00600ff
-
-/* IOCFG2 */
-#define	R367CAB_IOCFG2	0xf007
-#define	F367CAB_OP2_LOCK_CONF	0xf00700e0
-#define	F367CAB_OP2_OD	0xf0070010
-#define	F367CAB_OP2_VAL	0xf0070008
-#define	F367CAB_OP1_LOCK_CONF	0xf0070007
-
-/* SDFR */
-#define	R367CAB_SDFR	0xf008
-#define	F367CAB_OP0_FREQ	0xf00800f0
-#define	F367CAB_OP1_FREQ	0xf008000f
-
-/* AUX_CLK */
-#define	R367CAB_AUX_CLK	0xf00a
-#define	F367CAB_AUXFEC_CTL	0xf00a00c0
-#define	F367CAB_DIS_CKX4	0xf00a0020
-#define	F367CAB_CKSEL	0xf00a0018
-#define	F367CAB_CKDIV_PROG	0xf00a0006
-#define	F367CAB_AUXCLK_ENA	0xf00a0001
-
-/* FREESYS1 */
-#define	R367CAB_FREESYS1	0xf00b
-#define	F367CAB_FREESYS_1	0xf00b00ff
-
-/* FREESYS2 */
-#define	R367CAB_FREESYS2	0xf00c
-#define	F367CAB_FREESYS_2	0xf00c00ff
-
-/* FREESYS3 */
-#define	R367CAB_FREESYS3	0xf00d
-#define	F367CAB_FREESYS_3	0xf00d00ff
-
-/* GPIO_CFG */
-#define	R367CAB_GPIO_CFG	0xf00e
-#define	F367CAB_GPIO7_OD	0xf00e0080
-#define	F367CAB_GPIO7_CFG	0xf00e0040
-#define	F367CAB_GPIO6_OD	0xf00e0020
-#define	F367CAB_GPIO6_CFG	0xf00e0010
-#define	F367CAB_GPIO5_OD	0xf00e0008
-#define	F367CAB_GPIO5_CFG	0xf00e0004
-#define	F367CAB_GPIO4_OD	0xf00e0002
-#define	F367CAB_GPIO4_CFG	0xf00e0001
-
-/* GPIO_CMD */
-#define	R367CAB_GPIO_CMD	0xf00f
-#define	F367CAB_GPIO7_VAL	0xf00f0008
-#define	F367CAB_GPIO6_VAL	0xf00f0004
-#define	F367CAB_GPIO5_VAL	0xf00f0002
-#define	F367CAB_GPIO4_VAL	0xf00f0001
-
-/* TSTRES */
-#define	R367CAB_TSTRES	0xf0c0
-#define	F367CAB_FRES_DISPLAY	0xf0c00080
-#define	F367CAB_FRES_FIFO_AD	0xf0c00020
-#define	F367CAB_FRESRS	0xf0c00010
-#define	F367CAB_FRESACS	0xf0c00008
-#define	F367CAB_FRESFEC	0xf0c00004
-#define	F367CAB_FRES_PRIF	0xf0c00002
-#define	F367CAB_FRESCORE	0xf0c00001
-
-/* ANACTRL */
-#define	R367CAB_ANACTRL	0xf0c1
-#define	F367CAB_BYPASS_XTAL	0xf0c10040
-#define	F367CAB_BYPASS_PLLXN	0xf0c1000c
-#define	F367CAB_DIS_PAD_OSC	0xf0c10002
-#define	F367CAB_STDBY_PLLXN	0xf0c10001
-
-/* TSTBUS */
-#define	R367CAB_TSTBUS	0xf0c2
-#define	F367CAB_TS_BYTE_CLK_INV	0xf0c20080
-#define	F367CAB_CFG_IP	0xf0c20070
-#define	F367CAB_CFG_TST	0xf0c2000f
-
-/* RF_AGC1 */
-#define	R367CAB_RF_AGC1	0xf0d4
-#define	F367CAB_RF_AGC1_LEVEL_HI	0xf0d400ff
-
-/* RF_AGC2 */
-#define	R367CAB_RF_AGC2	0xf0d5
-#define	F367CAB_REF_ADGP	0xf0d50080
-#define	F367CAB_STDBY_ADCGP	0xf0d50020
-#define	F367CAB_RF_AGC1_LEVEL_LO	0xf0d50003
-
-/* ANADIGCTRL */
-#define	R367CAB_ANADIGCTRL	0xf0d7
-#define	F367CAB_SEL_CLKDEM	0xf0d70020
-#define	F367CAB_EN_BUFFER_Q	0xf0d70010
-#define	F367CAB_EN_BUFFER_I	0xf0d70008
-#define	F367CAB_ADC_RIS_EGDE	0xf0d70004
-#define	F367CAB_SGN_ADC	0xf0d70002
-#define	F367CAB_SEL_AD12_SYNC	0xf0d70001
-
-/* PLLMDIV */
-#define	R367CAB_PLLMDIV	0xf0d8
-#define	F367CAB_PLL_MDIV	0xf0d800ff
-
-/* PLLNDIV */
-#define	R367CAB_PLLNDIV	0xf0d9
-#define	F367CAB_PLL_NDIV	0xf0d900ff
-
-/* PLLSETUP */
-#define	R367CAB_PLLSETUP	0xf0da
-#define	F367CAB_PLL_PDIV	0xf0da0070
-#define	F367CAB_PLL_KDIV	0xf0da000f
-
-/* DUAL_AD12 */
-#define	R367CAB_DUAL_AD12	0xf0db
-#define	F367CAB_FS20M	0xf0db0020
-#define	F367CAB_FS50M	0xf0db0010
-#define	F367CAB_INMODe0	0xf0db0008
-#define	F367CAB_POFFQ	0xf0db0004
-#define	F367CAB_POFFI	0xf0db0002
-#define	F367CAB_INMODE1	0xf0db0001
-
-/* TSTBIST */
-#define	R367CAB_TSTBIST	0xf0dc
-#define	F367CAB_TST_BYP_CLK	0xf0dc0080
-#define	F367CAB_TST_GCLKENA_STD	0xf0dc0040
-#define	F367CAB_TST_GCLKENA	0xf0dc0020
-#define	F367CAB_TST_MEMBIST	0xf0dc001f
-
-/* CTRL_1 */
-#define	R367CAB_CTRL_1	0xf402
-#define	F367CAB_SOFT_RST	0xf4020080
-#define	F367CAB_EQU_RST	0xf4020008
-#define	F367CAB_CRL_RST	0xf4020004
-#define	F367CAB_TRL_RST	0xf4020002
-#define	F367CAB_AGC_RST	0xf4020001
-
-/* CTRL_2 */
-#define	R367CAB_CTRL_2	0xf403
-#define	F367CAB_DEINT_RST	0xf4030008
-#define	F367CAB_RS_RST	0xf4030004
-
-/* IT_STATUS1 */
-#define	R367CAB_IT_STATUS1	0xf408
-#define	F367CAB_SWEEP_OUT	0xf4080080
-#define	F367CAB_FSM_CRL	0xf4080040
-#define	F367CAB_CRL_LOCK	0xf4080020
-#define	F367CAB_MFSM	0xf4080010
-#define	F367CAB_TRL_LOCK	0xf4080008
-#define	F367CAB_TRL_AGC_LIMIT	0xf4080004
-#define	F367CAB_ADJ_AGC_LOCK	0xf4080002
-#define	F367CAB_AGC_QAM_LOCK	0xf4080001
-
-/* IT_STATUS2 */
-#define	R367CAB_IT_STATUS2	0xf409
-#define	F367CAB_TSMF_CNT	0xf4090080
-#define	F367CAB_TSMF_EOF	0xf4090040
-#define	F367CAB_TSMF_RDY	0xf4090020
-#define	F367CAB_FEC_NOCORR	0xf4090010
-#define	F367CAB_SYNCSTATE	0xf4090008
-#define	F367CAB_DEINT_LOCK	0xf4090004
-#define	F367CAB_FADDING_FRZ	0xf4090002
-#define	F367CAB_TAPMON_ALARM	0xf4090001
-
-/* IT_EN1 */
-#define	R367CAB_IT_EN1	0xf40a
-#define	F367CAB_SWEEP_OUTE	0xf40a0080
-#define	F367CAB_FSM_CRLE	0xf40a0040
-#define	F367CAB_CRL_LOCKE	0xf40a0020
-#define	F367CAB_MFSME	0xf40a0010
-#define	F367CAB_TRL_LOCKE	0xf40a0008
-#define	F367CAB_TRL_AGC_LIMITE	0xf40a0004
-#define	F367CAB_ADJ_AGC_LOCKE	0xf40a0002
-#define	F367CAB_AGC_LOCKE	0xf40a0001
-
-/* IT_EN2 */
-#define	R367CAB_IT_EN2	0xf40b
-#define	F367CAB_TSMF_CNTE	0xf40b0080
-#define	F367CAB_TSMF_EOFE	0xf40b0040
-#define	F367CAB_TSMF_RDYE	0xf40b0020
-#define	F367CAB_FEC_NOCORRE	0xf40b0010
-#define	F367CAB_SYNCSTATEE	0xf40b0008
-#define	F367CAB_DEINT_LOCKE	0xf40b0004
-#define	F367CAB_FADDING_FRZE	0xf40b0002
-#define	F367CAB_TAPMON_ALARME	0xf40b0001
-
-/* CTRL_STATUS */
-#define	R367CAB_CTRL_STATUS	0xf40c
-#define	F367CAB_QAMFEC_LOCK	0xf40c0004
-#define	F367CAB_TSMF_LOCK	0xf40c0002
-#define	F367CAB_TSMF_ERROR	0xf40c0001
-
-/* TEST_CTL */
-#define	R367CAB_TEST_CTL	0xf40f
-#define	F367CAB_TST_BLK_SEL	0xf40f0060
-#define	F367CAB_TST_BUS_SEL	0xf40f001f
-
-/* AGC_CTL */
-#define	R367CAB_AGC_CTL	0xf410
-#define	F367CAB_AGC_LCK_TH	0xf41000f0
-#define	F367CAB_AGC_ACCUMRSTSEL	0xf4100007
-
-/* AGC_IF_CFG */
-#define	R367CAB_AGC_IF_CFG	0xf411
-#define	F367CAB_AGC_IF_BWSEL	0xf41100f0
-#define	F367CAB_AGC_IF_FREEZE	0xf4110002
-
-/* AGC_RF_CFG */
-#define	R367CAB_AGC_RF_CFG	0xf412
-#define	F367CAB_AGC_RF_BWSEL	0xf4120070
-#define	F367CAB_AGC_RF_FREEZE	0xf4120002
-
-/* AGC_PWM_CFG */
-#define	R367CAB_AGC_PWM_CFG	0xf413
-#define	F367CAB_AGC_RF_PWM_TST	0xf4130080
-#define	F367CAB_AGC_RF_PWM_INV	0xf4130040
-#define	F367CAB_AGC_IF_PWM_TST	0xf4130008
-#define	F367CAB_AGC_IF_PWM_INV	0xf4130004
-#define	F367CAB_AGC_PWM_CLKDIV	0xf4130003
-
-/* AGC_PWR_REF_L */
-#define	R367CAB_AGC_PWR_REF_L	0xf414
-#define	F367CAB_AGC_PWRREF_LO	0xf41400ff
-
-/* AGC_PWR_REF_H */
-#define	R367CAB_AGC_PWR_REF_H	0xf415
-#define	F367CAB_AGC_PWRREF_HI	0xf4150003
-
-/* AGC_RF_TH_L */
-#define	R367CAB_AGC_RF_TH_L	0xf416
-#define	F367CAB_AGC_RF_TH_LO	0xf41600ff
-
-/* AGC_RF_TH_H */
-#define	R367CAB_AGC_RF_TH_H	0xf417
-#define	F367CAB_AGC_RF_TH_HI	0xf417000f
-
-/* AGC_IF_LTH_L */
-#define	R367CAB_AGC_IF_LTH_L	0xf418
-#define	F367CAB_AGC_IF_THLO_LO	0xf41800ff
-
-/* AGC_IF_LTH_H */
-#define	R367CAB_AGC_IF_LTH_H	0xf419
-#define	F367CAB_AGC_IF_THLO_HI	0xf419000f
-
-/* AGC_IF_HTH_L */
-#define	R367CAB_AGC_IF_HTH_L	0xf41a
-#define	F367CAB_AGC_IF_THHI_LO	0xf41a00ff
-
-/* AGC_IF_HTH_H */
-#define	R367CAB_AGC_IF_HTH_H	0xf41b
-#define	F367CAB_AGC_IF_THHI_HI	0xf41b000f
-
-/* AGC_PWR_RD_L */
-#define	R367CAB_AGC_PWR_RD_L	0xf41c
-#define	F367CAB_AGC_PWR_WORD_LO	0xf41c00ff
-
-/* AGC_PWR_RD_M */
-#define	R367CAB_AGC_PWR_RD_M	0xf41d
-#define	F367CAB_AGC_PWR_WORD_ME	0xf41d00ff
-
-/* AGC_PWR_RD_H */
-#define	R367CAB_AGC_PWR_RD_H	0xf41e
-#define	F367CAB_AGC_PWR_WORD_HI	0xf41e0003
-
-/* AGC_PWM_IFCMD_L */
-#define	R367CAB_AGC_PWM_IFCMD_L	0xf420
-#define	F367CAB_AGC_IF_PWMCMD_LO	0xf42000ff
-
-/* AGC_PWM_IFCMD_H */
-#define	R367CAB_AGC_PWM_IFCMD_H	0xf421
-#define	F367CAB_AGC_IF_PWMCMD_HI	0xf421000f
-
-/* AGC_PWM_RFCMD_L */
-#define	R367CAB_AGC_PWM_RFCMD_L	0xf422
-#define	F367CAB_AGC_RF_PWMCMD_LO	0xf42200ff
-
-/* AGC_PWM_RFCMD_H */
-#define	R367CAB_AGC_PWM_RFCMD_H	0xf423
-#define	F367CAB_AGC_RF_PWMCMD_HI	0xf423000f
-
-/* IQDEM_CFG */
-#define	R367CAB_IQDEM_CFG	0xf424
-#define	F367CAB_IQDEM_CLK_SEL	0xf4240004
-#define	F367CAB_IQDEM_INVIQ	0xf4240002
-#define	F367CAB_IQDEM_A2dTYPE	0xf4240001
-
-/* MIX_NCO_LL */
-#define	R367CAB_MIX_NCO_LL	0xf425
-#define	F367CAB_MIX_NCO_INC_LL	0xf42500ff
-
-/* MIX_NCO_HL */
-#define	R367CAB_MIX_NCO_HL	0xf426
-#define	F367CAB_MIX_NCO_INC_HL	0xf42600ff
-
-/* MIX_NCO_HH */
-#define	R367CAB_MIX_NCO_HH	0xf427
-#define	F367CAB_MIX_NCO_INVCNST	0xf4270080
-#define	F367CAB_MIX_NCO_INC_HH	0xf427007f
-
-/* SRC_NCO_LL */
-#define	R367CAB_SRC_NCO_LL	0xf428
-#define	F367CAB_SRC_NCO_INC_LL	0xf42800ff
-
-/* SRC_NCO_LH */
-#define	R367CAB_SRC_NCO_LH	0xf429
-#define	F367CAB_SRC_NCO_INC_LH	0xf42900ff
-
-/* SRC_NCO_HL */
-#define	R367CAB_SRC_NCO_HL	0xf42a
-#define	F367CAB_SRC_NCO_INC_HL	0xf42a00ff
-
-/* SRC_NCO_HH */
-#define	R367CAB_SRC_NCO_HH	0xf42b
-#define	F367CAB_SRC_NCO_INC_HH	0xf42b007f
-
-/* IQDEM_GAIN_SRC_L */
-#define	R367CAB_IQDEM_GAIN_SRC_L	0xf42c
-#define	F367CAB_GAIN_SRC_LO	0xf42c00ff
-
-/* IQDEM_GAIN_SRC_H */
-#define	R367CAB_IQDEM_GAIN_SRC_H	0xf42d
-#define	F367CAB_GAIN_SRC_HI	0xf42d0003
-
-/* IQDEM_DCRM_CFG_LL */
-#define	R367CAB_IQDEM_DCRM_CFG_LL	0xf430
-#define	F367CAB_DCRM0_DCIN_L	0xf43000ff
-
-/* IQDEM_DCRM_CFG_LH */
-#define	R367CAB_IQDEM_DCRM_CFG_LH	0xf431
-#define	F367CAB_DCRM1_I_DCIN_L	0xf43100fc
-#define	F367CAB_DCRM0_DCIN_H	0xf4310003
-
-/* IQDEM_DCRM_CFG_HL */
-#define	R367CAB_IQDEM_DCRM_CFG_HL	0xf432
-#define	F367CAB_DCRM1_Q_DCIN_L	0xf43200f0
-#define	F367CAB_DCRM1_I_DCIN_H	0xf432000f
-
-/* IQDEM_DCRM_CFG_HH */
-#define	R367CAB_IQDEM_DCRM_CFG_HH	0xf433
-#define	F367CAB_DCRM1_FRZ	0xf4330080
-#define	F367CAB_DCRM0_FRZ	0xf4330040
-#define	F367CAB_DCRM1_Q_DCIN_H	0xf433003f
-
-/* IQDEM_ADJ_COEFf0 */
-#define	R367CAB_IQDEM_ADJ_COEFF0	0xf434
-#define	F367CAB_ADJIIR_COEFF10_L	0xf43400ff
-
-/* IQDEM_ADJ_COEFF1 */
-#define	R367CAB_IQDEM_ADJ_COEFF1	0xf435
-#define	F367CAB_ADJIIR_COEFF11_L	0xf43500fc
-#define	F367CAB_ADJIIR_COEFF10_H	0xf4350003
-
-/* IQDEM_ADJ_COEFF2 */
-#define	R367CAB_IQDEM_ADJ_COEFF2	0xf436
-#define	F367CAB_ADJIIR_COEFF12_L	0xf43600f0
-#define	F367CAB_ADJIIR_COEFF11_H	0xf436000f
-
-/* IQDEM_ADJ_COEFF3 */
-#define	R367CAB_IQDEM_ADJ_COEFF3	0xf437
-#define	F367CAB_ADJIIR_COEFF20_L	0xf43700c0
-#define	F367CAB_ADJIIR_COEFF12_H	0xf437003f
-
-/* IQDEM_ADJ_COEFF4 */
-#define	R367CAB_IQDEM_ADJ_COEFF4	0xf438
-#define	F367CAB_ADJIIR_COEFF20_H	0xf43800ff
-
-/* IQDEM_ADJ_COEFF5 */
-#define	R367CAB_IQDEM_ADJ_COEFF5	0xf439
-#define	F367CAB_ADJIIR_COEFF21_L	0xf43900ff
-
-/* IQDEM_ADJ_COEFF6 */
-#define	R367CAB_IQDEM_ADJ_COEFF6	0xf43a
-#define	F367CAB_ADJIIR_COEFF22_L	0xf43a00fc
-#define	F367CAB_ADJIIR_COEFF21_H	0xf43a0003
-
-/* IQDEM_ADJ_COEFF7 */
-#define	R367CAB_IQDEM_ADJ_COEFF7	0xf43b
-#define	F367CAB_ADJIIR_COEFF22_H	0xf43b000f
-
-/* IQDEM_ADJ_EN */
-#define	R367CAB_IQDEM_ADJ_EN	0xf43c
-#define	F367CAB_ALLPASSFILT_EN	0xf43c0008
-#define	F367CAB_ADJ_AGC_EN	0xf43c0004
-#define	F367CAB_ADJ_COEFF_FRZ	0xf43c0002
-#define	F367CAB_ADJ_EN	0xf43c0001
-
-/* IQDEM_ADJ_AGC_REF */
-#define	R367CAB_IQDEM_ADJ_AGC_REF	0xf43d
-#define	F367CAB_ADJ_AGC_REF	0xf43d00ff
-
-/* ALLPASSFILT1 */
-#define	R367CAB_ALLPASSFILT1	0xf440
-#define	F367CAB_ALLPASSFILT_COEFF1_LO	0xf44000ff
-
-/* ALLPASSFILT2 */
-#define	R367CAB_ALLPASSFILT2	0xf441
-#define	F367CAB_ALLPASSFILT_COEFF1_ME	0xf44100ff
-
-/* ALLPASSFILT3 */
-#define	R367CAB_ALLPASSFILT3	0xf442
-#define	F367CAB_ALLPASSFILT_COEFF2_LO	0xf44200c0
-#define	F367CAB_ALLPASSFILT_COEFF1_HI	0xf442003f
-
-/* ALLPASSFILT4 */
-#define	R367CAB_ALLPASSFILT4	0xf443
-#define	F367CAB_ALLPASSFILT_COEFF2_MEL	0xf44300ff
-
-/* ALLPASSFILT5 */
-#define	R367CAB_ALLPASSFILT5	0xf444
-#define	F367CAB_ALLPASSFILT_COEFF2_MEH	0xf44400ff
-
-/* ALLPASSFILT6 */
-#define	R367CAB_ALLPASSFILT6	0xf445
-#define	F367CAB_ALLPASSFILT_COEFF3_LO	0xf44500f0
-#define	F367CAB_ALLPASSFILT_COEFF2_HI	0xf445000f
-
-/* ALLPASSFILT7 */
-#define	R367CAB_ALLPASSFILT7	0xf446
-#define	F367CAB_ALLPASSFILT_COEFF3_MEL	0xf44600ff
-
-/* ALLPASSFILT8 */
-#define	R367CAB_ALLPASSFILT8	0xf447
-#define	F367CAB_ALLPASSFILT_COEFF3_MEH	0xf44700ff
-
-/* ALLPASSFILT9 */
-#define	R367CAB_ALLPASSFILT9	0xf448
-#define	F367CAB_ALLPASSFILT_COEFF4_LO	0xf44800fc
-#define	F367CAB_ALLPASSFILT_COEFF3_HI	0xf4480003
-
-/* ALLPASSFILT10 */
-#define	R367CAB_ALLPASSFILT10	0xf449
-#define	F367CAB_ALLPASSFILT_COEFF4_ME	0xf44900ff
-
-/* ALLPASSFILT11 */
-#define	R367CAB_ALLPASSFILT11	0xf44a
-#define	F367CAB_ALLPASSFILT_COEFF4_HI	0xf44a00ff
-
-/* TRL_AGC_CFG */
-#define	R367CAB_TRL_AGC_CFG	0xf450
-#define	F367CAB_TRL_AGC_FREEZE	0xf4500080
-#define	F367CAB_TRL_AGC_REF	0xf450007f
-
-/* TRL_LPF_CFG */
-#define	R367CAB_TRL_LPF_CFG	0xf454
-#define	F367CAB_NYQPOINT_INV	0xf4540040
-#define	F367CAB_TRL_SHIFT	0xf4540030
-#define	F367CAB_NYQ_COEFF_SEL	0xf454000c
-#define	F367CAB_TRL_LPF_FREEZE	0xf4540002
-#define	F367CAB_TRL_LPF_CRT	0xf4540001
-
-/* TRL_LPF_ACQ_GAIN */
-#define	R367CAB_TRL_LPF_ACQ_GAIN	0xf455
-#define	F367CAB_TRL_GDIR_ACQ	0xf4550070
-#define	F367CAB_TRL_GINT_ACQ	0xf4550007
-
-/* TRL_LPF_TRK_GAIN */
-#define	R367CAB_TRL_LPF_TRK_GAIN	0xf456
-#define	F367CAB_TRL_GDIR_TRK	0xf4560070
-#define	F367CAB_TRL_GINT_TRK	0xf4560007
-
-/* TRL_LPF_OUT_GAIN */
-#define	R367CAB_TRL_LPF_OUT_GAIN	0xf457
-#define	F367CAB_TRL_GAIN_OUT	0xf4570007
-
-/* TRL_LOCKDET_LTH */
-#define	R367CAB_TRL_LOCKDET_LTH	0xf458
-#define	F367CAB_TRL_LCK_THLO	0xf4580007
-
-/* TRL_LOCKDET_HTH */
-#define	R367CAB_TRL_LOCKDET_HTH	0xf459
-#define	F367CAB_TRL_LCK_THHI	0xf45900ff
-
-/* TRL_LOCKDET_TRGVAL */
-#define	R367CAB_TRL_LOCKDET_TRGVAL	0xf45a
-#define	F367CAB_TRL_LCK_TRG	0xf45a00ff
-
-/* IQ_QAM */
-#define	R367CAB_IQ_QAM	0xf45c
-#define	F367CAB_IQ_INPUT	0xf45c0008
-#define	F367CAB_DETECT_MODE	0xf45c0007
-
-/* FSM_STATE */
-#define	R367CAB_FSM_STATE	0xf460
-#define	F367CAB_CRL_DFE	0xf4600080
-#define	F367CAB_DFE_START	0xf4600040
-#define	F367CAB_CTRLG_START	0xf4600030
-#define	F367CAB_FSM_FORCESTATE	0xf460000f
-
-/* FSM_CTL */
-#define	R367CAB_FSM_CTL	0xf461
-#define	F367CAB_FEC2_EN	0xf4610040
-#define	F367CAB_SIT_EN	0xf4610020
-#define	F367CAB_TRL_AHEAD	0xf4610010
-#define	F367CAB_TRL2_EN	0xf4610008
-#define	F367CAB_FSM_EQA1_EN	0xf4610004
-#define	F367CAB_FSM_BKP_DIS	0xf4610002
-#define	F367CAB_FSM_FORCE_EN	0xf4610001
-
-/* FSM_STS */
-#define	R367CAB_FSM_STS	0xf462
-#define	F367CAB_FSM_STATUS	0xf462000f
-
-/* FSM_SNR0_HTH */
-#define	R367CAB_FSM_SNR0_HTH	0xf463
-#define	F367CAB_SNR0_HTH	0xf46300ff
-
-/* FSM_SNR1_HTH */
-#define	R367CAB_FSM_SNR1_HTH	0xf464
-#define	F367CAB_SNR1_HTH	0xf46400ff
-
-/* FSM_SNR2_HTH */
-#define	R367CAB_FSM_SNR2_HTH	0xf465
-#define	F367CAB_SNR2_HTH	0xf46500ff
-
-/* FSM_SNR0_LTH */
-#define	R367CAB_FSM_SNR0_LTH	0xf466
-#define	F367CAB_SNR0_LTH	0xf46600ff
-
-/* FSM_SNR1_LTH */
-#define	R367CAB_FSM_SNR1_LTH	0xf467
-#define	F367CAB_SNR1_LTH	0xf46700ff
-
-/* FSM_EQA1_HTH */
-#define	R367CAB_FSM_EQA1_HTH	0xf468
-#define	F367CAB_SNR3_HTH_LO	0xf46800f0
-#define	F367CAB_EQA1_HTH	0xf468000f
-
-/* FSM_TEMPO */
-#define	R367CAB_FSM_TEMPO	0xf469
-#define	F367CAB_SIT	0xf46900c0
-#define	F367CAB_WST	0xf4690038
-#define	F367CAB_ELT	0xf4690006
-#define	F367CAB_SNR3_HTH_HI	0xf4690001
-
-/* FSM_CONFIG */
-#define	R367CAB_FSM_CONFIG	0xf46a
-#define	F367CAB_FEC2_DFEOFF	0xf46a0004
-#define	F367CAB_PRIT_STATE	0xf46a0002
-#define	F367CAB_MODMAP_STATE	0xf46a0001
-
-/* EQU_I_TESTTAP_L */
-#define	R367CAB_EQU_I_TESTTAP_L	0xf474
-#define	F367CAB_I_TEST_TAP_L	0xf47400ff
-
-/* EQU_I_TESTTAP_M */
-#define	R367CAB_EQU_I_TESTTAP_M	0xf475
-#define	F367CAB_I_TEST_TAP_M	0xf47500ff
-
-/* EQU_I_TESTTAP_H */
-#define	R367CAB_EQU_I_TESTTAP_H	0xf476
-#define	F367CAB_I_TEST_TAP_H	0xf476001f
-
-/* EQU_TESTAP_CFG */
-#define	R367CAB_EQU_TESTAP_CFG	0xf477
-#define	F367CAB_TEST_FFE_DFE_SEL	0xf4770040
-#define	F367CAB_TEST_TAP_SELECT	0xf477003f
-
-/* EQU_Q_TESTTAP_L */
-#define	R367CAB_EQU_Q_TESTTAP_L	0xf478
-#define	F367CAB_Q_TEST_TAP_L	0xf47800ff
-
-/* EQU_Q_TESTTAP_M */
-#define	R367CAB_EQU_Q_TESTTAP_M	0xf479
-#define	F367CAB_Q_TEST_TAP_M	0xf47900ff
-
-/* EQU_Q_TESTTAP_H */
-#define	R367CAB_EQU_Q_TESTTAP_H	0xf47a
-#define	F367CAB_Q_TEST_TAP_H	0xf47a001f
-
-/* EQU_TAP_CTRL */
-#define	R367CAB_EQU_TAP_CTRL	0xf47b
-#define	F367CAB_MTAP_FRZ	0xf47b0010
-#define	F367CAB_PRE_FREEZE	0xf47b0008
-#define	F367CAB_DFE_TAPMON_EN	0xf47b0004
-#define	F367CAB_FFE_TAPMON_EN	0xf47b0002
-#define	F367CAB_MTAP_ONLY	0xf47b0001
-
-/* EQU_CTR_CRL_CONTROL_L */
-#define	R367CAB_EQU_CTR_CRL_CONTROL_L	0xf47c
-#define	F367CAB_EQU_CTR_CRL_CONTROL_LO	0xf47c00ff
-
-/* EQU_CTR_CRL_CONTROL_H */
-#define	R367CAB_EQU_CTR_CRL_CONTROL_H	0xf47d
-#define	F367CAB_EQU_CTR_CRL_CONTROL_HI	0xf47d00ff
-
-/* EQU_CTR_HIPOW_L */
-#define	R367CAB_EQU_CTR_HIPOW_L	0xf47e
-#define	F367CAB_CTR_HIPOW_L	0xf47e00ff
-
-/* EQU_CTR_HIPOW_H */
-#define	R367CAB_EQU_CTR_HIPOW_H	0xf47f
-#define	F367CAB_CTR_HIPOW_H	0xf47f00ff
-
-/* EQU_I_EQU_LO */
-#define	R367CAB_EQU_I_EQU_LO	0xf480
-#define	F367CAB_EQU_I_EQU_L	0xf48000ff
-
-/* EQU_I_EQU_HI */
-#define	R367CAB_EQU_I_EQU_HI	0xf481
-#define	F367CAB_EQU_I_EQU_H	0xf4810003
-
-/* EQU_Q_EQU_LO */
-#define	R367CAB_EQU_Q_EQU_LO	0xf482
-#define	F367CAB_EQU_Q_EQU_L	0xf48200ff
-
-/* EQU_Q_EQU_HI */
-#define	R367CAB_EQU_Q_EQU_HI	0xf483
-#define	F367CAB_EQU_Q_EQU_H	0xf4830003
-
-/* EQU_MAPPER */
-#define	R367CAB_EQU_MAPPER	0xf484
-#define	F367CAB_QUAD_AUTO	0xf4840080
-#define	F367CAB_QUAD_INV	0xf4840040
-#define	F367CAB_QAM_MODE	0xf4840007
-
-/* EQU_SWEEP_RATE */
-#define	R367CAB_EQU_SWEEP_RATE	0xf485
-#define	F367CAB_SNR_PER	0xf48500c0
-#define	F367CAB_SWEEP_RATE	0xf485003f
-
-/* EQU_SNR_LO */
-#define	R367CAB_EQU_SNR_LO	0xf486
-#define	F367CAB_SNR_LO	0xf48600ff
-
-/* EQU_SNR_HI */
-#define	R367CAB_EQU_SNR_HI	0xf487
-#define	F367CAB_SNR_HI	0xf48700ff
-
-/* EQU_GAMMA_LO */
-#define	R367CAB_EQU_GAMMA_LO	0xf488
-#define	F367CAB_GAMMA_LO	0xf48800ff
-
-/* EQU_GAMMA_HI */
-#define	R367CAB_EQU_GAMMA_HI	0xf489
-#define	F367CAB_GAMMA_ME	0xf48900ff
-
-/* EQU_ERR_GAIN */
-#define	R367CAB_EQU_ERR_GAIN	0xf48a
-#define	F367CAB_EQA1MU	0xf48a0070
-#define	F367CAB_CRL2MU	0xf48a000e
-#define	F367CAB_GAMMA_HI	0xf48a0001
-
-/* EQU_RADIUS */
-#define	R367CAB_EQU_RADIUS	0xf48b
-#define	F367CAB_RADIUS	0xf48b00ff
-
-/* EQU_FFE_MAINTAP */
-#define	R367CAB_EQU_FFE_MAINTAP	0xf48c
-#define	F367CAB_FFE_MAINTAP_INIT	0xf48c00ff
-
-/* EQU_FFE_LEAKAGE */
-#define	R367CAB_EQU_FFE_LEAKAGE	0xf48e
-#define	F367CAB_LEAK_PER	0xf48e00f0
-#define	F367CAB_EQU_OUTSEL	0xf48e0002
-#define	F367CAB_PNT2dFE	0xf48e0001
-
-/* EQU_FFE_MAINTAP_POS */
-#define	R367CAB_EQU_FFE_MAINTAP_POS	0xf48f
-#define	F367CAB_FFE_LEAK_EN	0xf48f0080
-#define	F367CAB_DFE_LEAK_EN	0xf48f0040
-#define	F367CAB_FFE_MAINTAP_POS	0xf48f003f
-
-/* EQU_GAIN_WIDE */
-#define	R367CAB_EQU_GAIN_WIDE	0xf490
-#define	F367CAB_DFE_GAIN_WIDE	0xf49000f0
-#define	F367CAB_FFE_GAIN_WIDE	0xf490000f
-
-/* EQU_GAIN_NARROW */
-#define	R367CAB_EQU_GAIN_NARROW	0xf491
-#define	F367CAB_DFE_GAIN_NARROW	0xf49100f0
-#define	F367CAB_FFE_GAIN_NARROW	0xf491000f
-
-/* EQU_CTR_LPF_GAIN */
-#define	R367CAB_EQU_CTR_LPF_GAIN	0xf492
-#define	F367CAB_CTR_GTO	0xf4920080
-#define	F367CAB_CTR_GDIR	0xf4920070
-#define	F367CAB_SWEEP_EN	0xf4920008
-#define	F367CAB_CTR_GINT	0xf4920007
-
-/* EQU_CRL_LPF_GAIN */
-#define	R367CAB_EQU_CRL_LPF_GAIN	0xf493
-#define	F367CAB_CRL_GTO	0xf4930080
-#define	F367CAB_CRL_GDIR	0xf4930070
-#define	F367CAB_SWEEP_DIR	0xf4930008
-#define	F367CAB_CRL_GINT	0xf4930007
-
-/* EQU_GLOBAL_GAIN */
-#define	R367CAB_EQU_GLOBAL_GAIN	0xf494
-#define	F367CAB_CRL_GAIN	0xf49400f8
-#define	F367CAB_CTR_INC_GAIN	0xf4940004
-#define	F367CAB_CTR_FRAC	0xf4940003
-
-/* EQU_CRL_LD_SEN */
-#define	R367CAB_EQU_CRL_LD_SEN	0xf495
-#define	F367CAB_CTR_BADPOINT_EN	0xf4950080
-#define	F367CAB_CTR_GAIN	0xf4950070
-#define	F367CAB_LIMANEN	0xf4950008
-#define	F367CAB_CRL_LD_SEN	0xf4950007
-
-/* EQU_CRL_LD_VAL */
-#define	R367CAB_EQU_CRL_LD_VAL	0xf496
-#define	F367CAB_CRL_BISTH_LIMIT	0xf4960080
-#define	F367CAB_CARE_EN	0xf4960040
-#define	F367CAB_CRL_LD_PER	0xf4960030
-#define	F367CAB_CRL_LD_WST	0xf496000c
-#define	F367CAB_CRL_LD_TFS	0xf4960003
-
-/* EQU_CRL_TFR */
-#define	R367CAB_EQU_CRL_TFR	0xf497
-#define	F367CAB_CRL_LD_TFR	0xf49700ff
-
-/* EQU_CRL_BISTH_LO */
-#define	R367CAB_EQU_CRL_BISTH_LO	0xf498
-#define	F367CAB_CRL_BISTH_LO	0xf49800ff
-
-/* EQU_CRL_BISTH_HI */
-#define	R367CAB_EQU_CRL_BISTH_HI	0xf499
-#define	F367CAB_CRL_BISTH_HI	0xf49900ff
-
-/* EQU_SWEEP_RANGE_LO */
-#define	R367CAB_EQU_SWEEP_RANGE_LO	0xf49a
-#define	F367CAB_SWEEP_RANGE_LO	0xf49a00ff
-
-/* EQU_SWEEP_RANGE_HI */
-#define	R367CAB_EQU_SWEEP_RANGE_HI	0xf49b
-#define	F367CAB_SWEEP_RANGE_HI	0xf49b00ff
-
-/* EQU_CRL_LIMITER */
-#define	R367CAB_EQU_CRL_LIMITER	0xf49c
-#define	F367CAB_BISECTOR_EN	0xf49c0080
-#define	F367CAB_PHEST128_EN	0xf49c0040
-#define	F367CAB_CRL_LIM	0xf49c003f
-
-/* EQU_MODULUS_MAP */
-#define	R367CAB_EQU_MODULUS_MAP	0xf49d
-#define	F367CAB_PNT_DEPTH	0xf49d00e0
-#define	F367CAB_MODULUS_CMP	0xf49d001f
-
-/* EQU_PNT_GAIN */
-#define	R367CAB_EQU_PNT_GAIN	0xf49e
-#define	F367CAB_PNT_EN	0xf49e0080
-#define	F367CAB_MODULUSMAP_EN	0xf49e0040
-#define	F367CAB_PNT_GAIN	0xf49e003f
-
-/* FEC_AC_CTR_0 */
-#define	R367CAB_FEC_AC_CTR_0	0xf4a8
-#define	F367CAB_BE_BYPASS	0xf4a80020
-#define	F367CAB_REFRESH47	0xf4a80010
-#define	F367CAB_CT_NBST	0xf4a80008
-#define	F367CAB_TEI_ENA	0xf4a80004
-#define	F367CAB_DS_ENA	0xf4a80002
-#define	F367CAB_TSMF_EN	0xf4a80001
-
-/* FEC_AC_CTR_1 */
-#define	R367CAB_FEC_AC_CTR_1	0xf4a9
-#define	F367CAB_DEINT_DEPTH	0xf4a900ff
-
-/* FEC_AC_CTR_2 */
-#define	R367CAB_FEC_AC_CTR_2	0xf4aa
-#define	F367CAB_DEINT_M	0xf4aa00f8
-#define	F367CAB_DIS_UNLOCK	0xf4aa0004
-#define	F367CAB_DESCR_MODE	0xf4aa0003
-
-/* FEC_AC_CTR_3 */
-#define	R367CAB_FEC_AC_CTR_3	0xf4ab
-#define	F367CAB_DI_UNLOCK	0xf4ab0080
-#define	F367CAB_DI_FREEZE	0xf4ab0040
-#define	F367CAB_MISMATCH	0xf4ab0030
-#define	F367CAB_ACQ_MODE	0xf4ab000c
-#define	F367CAB_TRK_MODE	0xf4ab0003
-
-/* FEC_STATUS */
-#define	R367CAB_FEC_STATUS	0xf4ac
-#define	F367CAB_DEINT_SMCNTR	0xf4ac00e0
-#define	F367CAB_DEINT_SYNCSTATE	0xf4ac0018
-#define	F367CAB_DEINT_SYNLOST	0xf4ac0004
-#define	F367CAB_DESCR_SYNCSTATE	0xf4ac0002
-
-/* RS_COUNTER_0 */
-#define	R367CAB_RS_COUNTER_0	0xf4ae
-#define	F367CAB_BK_CT_L	0xf4ae00ff
-
-/* RS_COUNTER_1 */
-#define	R367CAB_RS_COUNTER_1	0xf4af
-#define	F367CAB_BK_CT_H	0xf4af00ff
-
-/* RS_COUNTER_2 */
-#define	R367CAB_RS_COUNTER_2	0xf4b0
-#define	F367CAB_CORR_CT_L	0xf4b000ff
-
-/* RS_COUNTER_3 */
-#define	R367CAB_RS_COUNTER_3	0xf4b1
-#define	F367CAB_CORR_CT_H	0xf4b100ff
-
-/* RS_COUNTER_4 */
-#define	R367CAB_RS_COUNTER_4	0xf4b2
-#define	F367CAB_UNCORR_CT_L	0xf4b200ff
-
-/* RS_COUNTER_5 */
-#define	R367CAB_RS_COUNTER_5	0xf4b3
-#define	F367CAB_UNCORR_CT_H	0xf4b300ff
-
-/* BERT_0 */
-#define	R367CAB_BERT_0	0xf4b4
-#define	F367CAB_RS_NOCORR	0xf4b40004
-#define	F367CAB_CT_HOLD	0xf4b40002
-#define	F367CAB_CT_CLEAR	0xf4b40001
-
-/* BERT_1 */
-#define	R367CAB_BERT_1	0xf4b5
-#define	F367CAB_BERT_ON	0xf4b50020
-#define	F367CAB_BERT_ERR_SRC	0xf4b50010
-#define	F367CAB_BERT_ERR_MODE	0xf4b50008
-#define	F367CAB_BERT_NBYTE	0xf4b50007
-
-/* BERT_2 */
-#define	R367CAB_BERT_2	0xf4b6
-#define	F367CAB_BERT_ERRCOUNT_L	0xf4b600ff
-
-/* BERT_3 */
-#define	R367CAB_BERT_3	0xf4b7
-#define	F367CAB_BERT_ERRCOUNT_H	0xf4b700ff
-
-/* OUTFORMAT_0 */
-#define	R367CAB_OUTFORMAT_0	0xf4b8
-#define	F367CAB_CLK_POLARITY	0xf4b80080
-#define	F367CAB_FEC_TYPE	0xf4b80040
-#define	F367CAB_SYNC_STRIP	0xf4b80008
-#define	F367CAB_TS_SWAP	0xf4b80004
-#define	F367CAB_OUTFORMAT	0xf4b80003
-
-/* OUTFORMAT_1 */
-#define	R367CAB_OUTFORMAT_1	0xf4b9
-#define	F367CAB_CI_DIVRANGE	0xf4b900ff
-
-/* SMOOTHER_2 */
-#define	R367CAB_SMOOTHER_2	0xf4be
-#define	F367CAB_FIFO_BYPASS	0xf4be0020
-
-/* TSMF_CTRL_0 */
-#define	R367CAB_TSMF_CTRL_0	0xf4c0
-#define	F367CAB_TS_NUMBER	0xf4c0001e
-#define	F367CAB_SEL_MODE	0xf4c00001
-
-/* TSMF_CTRL_1 */
-#define	R367CAB_TSMF_CTRL_1	0xf4c1
-#define	F367CAB_CHECK_ERROR_BIT	0xf4c10080
-#define	F367CAB_CHCK_F_SYNC	0xf4c10040
-#define	F367CAB_H_MODE	0xf4c10008
-#define	F367CAB_D_V_MODE	0xf4c10004
-#define	F367CAB_MODE	0xf4c10003
-
-/* TSMF_CTRL_3 */
-#define	R367CAB_TSMF_CTRL_3	0xf4c3
-#define	F367CAB_SYNC_IN_COUNT	0xf4c300f0
-#define	F367CAB_SYNC_OUT_COUNT	0xf4c3000f
-
-/* TS_ON_ID_0 */
-#define	R367CAB_TS_ON_ID_0	0xf4c4
-#define	F367CAB_TS_ID_L	0xf4c400ff
-
-/* TS_ON_ID_1 */
-#define	R367CAB_TS_ON_ID_1	0xf4c5
-#define	F367CAB_TS_ID_H	0xf4c500ff
-
-/* TS_ON_ID_2 */
-#define	R367CAB_TS_ON_ID_2	0xf4c6
-#define	F367CAB_ON_ID_L	0xf4c600ff
-
-/* TS_ON_ID_3 */
-#define	R367CAB_TS_ON_ID_3	0xf4c7
-#define	F367CAB_ON_ID_H	0xf4c700ff
-
-/* RE_STATUS_0 */
-#define	R367CAB_RE_STATUS_0	0xf4c8
-#define	F367CAB_RECEIVE_STATUS_L	0xf4c800ff
-
-/* RE_STATUS_1 */
-#define	R367CAB_RE_STATUS_1	0xf4c9
-#define	F367CAB_RECEIVE_STATUS_LH	0xf4c900ff
-
-/* RE_STATUS_2 */
-#define	R367CAB_RE_STATUS_2	0xf4ca
-#define	F367CAB_RECEIVE_STATUS_HL	0xf4ca00ff
-
-/* RE_STATUS_3 */
-#define	R367CAB_RE_STATUS_3	0xf4cb
-#define	F367CAB_RECEIVE_STATUS_HH	0xf4cb003f
-
-/* TS_STATUS_0 */
-#define	R367CAB_TS_STATUS_0	0xf4cc
-#define	F367CAB_TS_STATUS_L	0xf4cc00ff
-
-/* TS_STATUS_1 */
-#define	R367CAB_TS_STATUS_1	0xf4cd
-#define	F367CAB_TS_STATUS_H	0xf4cd007f
-
-/* TS_STATUS_2 */
-#define	R367CAB_TS_STATUS_2	0xf4ce
-#define	F367CAB_ERROR	0xf4ce0080
-#define	F367CAB_EMERGENCY	0xf4ce0040
-#define	F367CAB_CRE_TS	0xf4ce0030
-#define	F367CAB_VER	0xf4ce000e
-#define	F367CAB_M_LOCK	0xf4ce0001
-
-/* TS_STATUS_3 */
-#define	R367CAB_TS_STATUS_3	0xf4cf
-#define	F367CAB_UPDATE_READY	0xf4cf0080
-#define	F367CAB_END_FRAME_HEADER	0xf4cf0040
-#define	F367CAB_CONTCNT	0xf4cf0020
-#define	F367CAB_TS_IDENTIFIER_SEL	0xf4cf000f
-
-/* T_O_ID_0 */
-#define	R367CAB_T_O_ID_0	0xf4d0
-#define	F367CAB_ON_ID_I_L	0xf4d000ff
-
-/* T_O_ID_1 */
-#define	R367CAB_T_O_ID_1	0xf4d1
-#define	F367CAB_ON_ID_I_H	0xf4d100ff
-
-/* T_O_ID_2 */
-#define	R367CAB_T_O_ID_2	0xf4d2
-#define	F367CAB_TS_ID_I_L	0xf4d200ff
-
-/* T_O_ID_3 */
-#define	R367CAB_T_O_ID_3	0xf4d3
-#define	F367CAB_TS_ID_I_H	0xf4d300ff
-
-#define STV0367CAB_NBREGS	187
-
-#endif
diff --git a/drivers/media/dvb/frontends/stv0900.h b/drivers/media/dvb/frontends/stv0900.h
deleted file mode 100644
index 91c7ee8..0000000
--- a/drivers/media/dvb/frontends/stv0900.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * stv0900.h
- *
- * Driver for ST STV0900 satellite demodulator IC.
- *
- * Copyright (C) ST Microelectronics.
- * Copyright (C) 2009 NetUP Inc.
- * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef STV0900_H
-#define STV0900_H
-
-#include <linux/dvb/frontend.h>
-#include "dvb_frontend.h"
-
-struct stv0900_reg {
-	u16 addr;
-	u8  val;
-};
-
-struct stv0900_config {
-	u8 demod_address;
-	u8 demod_mode;
-	u32 xtal;
-	u8 clkmode;/* 0 for CLKI,  2 for XTALI */
-
-	u8 diseqc_mode;
-
-	u8 path1_mode;
-	u8 path2_mode;
-	struct stv0900_reg *ts_config_regs;
-	u8 tun1_maddress;/* 0, 1, 2, 3 for 0xc0, 0xc2, 0xc4, 0xc6 */
-	u8 tun2_maddress;
-	u8 tun1_adc;/* 1 for stv6110, 2 for stb6100 */
-	u8 tun2_adc;
-	u8 tun1_type;/* for now 3 for stb6100 auto, else - software */
-	u8 tun2_type;
-	/* Set device param to start dma */
-	int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured);
-	/* Hook for Lock LED */
-	void (*set_lock_led)(struct dvb_frontend *fe, int offon);
-};
-
-#if defined(CONFIG_DVB_STV0900) || (defined(CONFIG_DVB_STV0900_MODULE) \
-							&& defined(MODULE))
-extern struct dvb_frontend *stv0900_attach(const struct stv0900_config *config,
-					struct i2c_adapter *i2c, int demod);
-#else
-static inline struct dvb_frontend *stv0900_attach(const struct stv0900_config *config,
-					struct i2c_adapter *i2c, int demod)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif
-
diff --git a/drivers/media/dvb/frontends/stv0900_core.c b/drivers/media/dvb/frontends/stv0900_core.c
deleted file mode 100644
index 7f1bada..0000000
--- a/drivers/media/dvb/frontends/stv0900_core.c
+++ /dev/null
@@ -1,1959 +0,0 @@
-/*
- * stv0900_core.c
- *
- * Driver for ST STV0900 satellite demodulator IC.
- *
- * Copyright (C) ST Microelectronics.
- * Copyright (C) 2009 NetUP Inc.
- * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-
-#include "stv0900.h"
-#include "stv0900_reg.h"
-#include "stv0900_priv.h"
-#include "stv0900_init.h"
-
-int stvdebug = 1;
-module_param_named(debug, stvdebug, int, 0644);
-
-/* internal params node */
-struct stv0900_inode {
-	/* pointer for internal params, one for each pair of demods */
-	struct stv0900_internal		*internal;
-	struct stv0900_inode		*next_inode;
-};
-
-/* first internal params */
-static struct stv0900_inode *stv0900_first_inode;
-
-/* find chip by i2c adapter and i2c address */
-static struct stv0900_inode *find_inode(struct i2c_adapter *i2c_adap,
-							u8 i2c_addr)
-{
-	struct stv0900_inode *temp_chip = stv0900_first_inode;
-
-	if (temp_chip != NULL) {
-		/*
-		 Search of the last stv0900 chip or
-		 find it by i2c adapter and i2c address */
-		while ((temp_chip != NULL) &&
-			((temp_chip->internal->i2c_adap != i2c_adap) ||
-			(temp_chip->internal->i2c_addr != i2c_addr)))
-
-			temp_chip = temp_chip->next_inode;
-
-	}
-
-	return temp_chip;
-}
-
-/* deallocating chip */
-static void remove_inode(struct stv0900_internal *internal)
-{
-	struct stv0900_inode *prev_node = stv0900_first_inode;
-	struct stv0900_inode *del_node = find_inode(internal->i2c_adap,
-						internal->i2c_addr);
-
-	if (del_node != NULL) {
-		if (del_node == stv0900_first_inode) {
-			stv0900_first_inode = del_node->next_inode;
-		} else {
-			while (prev_node->next_inode != del_node)
-				prev_node = prev_node->next_inode;
-
-			if (del_node->next_inode == NULL)
-				prev_node->next_inode = NULL;
-			else
-				prev_node->next_inode =
-					prev_node->next_inode->next_inode;
-		}
-
-		kfree(del_node);
-	}
-}
-
-/* allocating new chip */
-static struct stv0900_inode *append_internal(struct stv0900_internal *internal)
-{
-	struct stv0900_inode *new_node = stv0900_first_inode;
-
-	if (new_node == NULL) {
-		new_node = kmalloc(sizeof(struct stv0900_inode), GFP_KERNEL);
-		stv0900_first_inode = new_node;
-	} else {
-		while (new_node->next_inode != NULL)
-			new_node = new_node->next_inode;
-
-		new_node->next_inode = kmalloc(sizeof(struct stv0900_inode),
-								GFP_KERNEL);
-		if (new_node->next_inode != NULL)
-			new_node = new_node->next_inode;
-		else
-			new_node = NULL;
-	}
-
-	if (new_node != NULL) {
-		new_node->internal = internal;
-		new_node->next_inode = NULL;
-	}
-
-	return new_node;
-}
-
-s32 ge2comp(s32 a, s32 width)
-{
-	if (width == 32)
-		return a;
-	else
-		return (a >= (1 << (width - 1))) ? (a - (1 << width)) : a;
-}
-
-void stv0900_write_reg(struct stv0900_internal *intp, u16 reg_addr,
-								u8 reg_data)
-{
-	u8 data[3];
-	int ret;
-	struct i2c_msg i2cmsg = {
-		.addr  = intp->i2c_addr,
-		.flags = 0,
-		.len   = 3,
-		.buf   = data,
-	};
-
-	data[0] = MSB(reg_addr);
-	data[1] = LSB(reg_addr);
-	data[2] = reg_data;
-
-	ret = i2c_transfer(intp->i2c_adap, &i2cmsg, 1);
-	if (ret != 1)
-		dprintk("%s: i2c error %d\n", __func__, ret);
-}
-
-u8 stv0900_read_reg(struct stv0900_internal *intp, u16 reg)
-{
-	int ret;
-	u8 b0[] = { MSB(reg), LSB(reg) };
-	u8 buf = 0;
-	struct i2c_msg msg[] = {
-		{
-			.addr	= intp->i2c_addr,
-			.flags	= 0,
-			.buf = b0,
-			.len = 2,
-		}, {
-			.addr	= intp->i2c_addr,
-			.flags	= I2C_M_RD,
-			.buf = &buf,
-			.len = 1,
-		},
-	};
-
-	ret = i2c_transfer(intp->i2c_adap, msg, 2);
-	if (ret != 2)
-		dprintk("%s: i2c error %d, reg[0x%02x]\n",
-				__func__, ret, reg);
-
-	return buf;
-}
-
-static void extract_mask_pos(u32 label, u8 *mask, u8 *pos)
-{
-	u8 position = 0, i = 0;
-
-	(*mask) = label & 0xff;
-
-	while ((position == 0) && (i < 8)) {
-		position = ((*mask) >> i) & 0x01;
-		i++;
-	}
-
-	(*pos) = (i - 1);
-}
-
-void stv0900_write_bits(struct stv0900_internal *intp, u32 label, u8 val)
-{
-	u8 reg, mask, pos;
-
-	reg = stv0900_read_reg(intp, (label >> 16) & 0xffff);
-	extract_mask_pos(label, &mask, &pos);
-
-	val = mask & (val << pos);
-
-	reg = (reg & (~mask)) | val;
-	stv0900_write_reg(intp, (label >> 16) & 0xffff, reg);
-
-}
-
-u8 stv0900_get_bits(struct stv0900_internal *intp, u32 label)
-{
-	u8 val = 0xff;
-	u8 mask, pos;
-
-	extract_mask_pos(label, &mask, &pos);
-
-	val = stv0900_read_reg(intp, label >> 16);
-	val = (val & mask) >> pos;
-
-	return val;
-}
-
-static enum fe_stv0900_error stv0900_initialize(struct stv0900_internal *intp)
-{
-	s32 i;
-
-	if (intp == NULL)
-		return STV0900_INVALID_HANDLE;
-
-	intp->chip_id = stv0900_read_reg(intp, R0900_MID);
-
-	if (intp->errs != STV0900_NO_ERROR)
-		return intp->errs;
-
-	/*Startup sequence*/
-	stv0900_write_reg(intp, R0900_P1_DMDISTATE, 0x5c);
-	stv0900_write_reg(intp, R0900_P2_DMDISTATE, 0x5c);
-	msleep(3);
-	stv0900_write_reg(intp, R0900_P1_TNRCFG, 0x6c);
-	stv0900_write_reg(intp, R0900_P2_TNRCFG, 0x6f);
-	stv0900_write_reg(intp, R0900_P1_I2CRPT, 0x20);
-	stv0900_write_reg(intp, R0900_P2_I2CRPT, 0x20);
-	stv0900_write_reg(intp, R0900_NCOARSE, 0x13);
-	msleep(3);
-	stv0900_write_reg(intp, R0900_I2CCFG, 0x08);
-
-	switch (intp->clkmode) {
-	case 0:
-	case 2:
-		stv0900_write_reg(intp, R0900_SYNTCTRL, 0x20
-				| intp->clkmode);
-		break;
-	default:
-		/* preserve SELOSCI bit */
-		i = 0x02 & stv0900_read_reg(intp, R0900_SYNTCTRL);
-		stv0900_write_reg(intp, R0900_SYNTCTRL, 0x20 | i);
-		break;
-	}
-
-	msleep(3);
-	for (i = 0; i < 181; i++)
-		stv0900_write_reg(intp, STV0900_InitVal[i][0],
-				STV0900_InitVal[i][1]);
-
-	if (stv0900_read_reg(intp, R0900_MID) >= 0x20) {
-		stv0900_write_reg(intp, R0900_TSGENERAL, 0x0c);
-		for (i = 0; i < 32; i++)
-			stv0900_write_reg(intp, STV0900_Cut20_AddOnVal[i][0],
-					STV0900_Cut20_AddOnVal[i][1]);
-	}
-
-	stv0900_write_reg(intp, R0900_P1_FSPYCFG, 0x6c);
-	stv0900_write_reg(intp, R0900_P2_FSPYCFG, 0x6c);
-
-	stv0900_write_reg(intp, R0900_P1_PDELCTRL2, 0x01);
-	stv0900_write_reg(intp, R0900_P2_PDELCTRL2, 0x21);
-
-	stv0900_write_reg(intp, R0900_P1_PDELCTRL3, 0x20);
-	stv0900_write_reg(intp, R0900_P2_PDELCTRL3, 0x20);
-
-	stv0900_write_reg(intp, R0900_TSTRES0, 0x80);
-	stv0900_write_reg(intp, R0900_TSTRES0, 0x00);
-
-	return STV0900_NO_ERROR;
-}
-
-static u32 stv0900_get_mclk_freq(struct stv0900_internal *intp, u32 ext_clk)
-{
-	u32 mclk = 90000000, div = 0, ad_div = 0;
-
-	div = stv0900_get_bits(intp, F0900_M_DIV);
-	ad_div = ((stv0900_get_bits(intp, F0900_SELX1RATIO) == 1) ? 4 : 6);
-
-	mclk = (div + 1) * ext_clk / ad_div;
-
-	dprintk("%s: Calculated Mclk = %d\n", __func__, mclk);
-
-	return mclk;
-}
-
-static enum fe_stv0900_error stv0900_set_mclk(struct stv0900_internal *intp, u32 mclk)
-{
-	u32 m_div, clk_sel;
-
-	dprintk("%s: Mclk set to %d, Quartz = %d\n", __func__, mclk,
-			intp->quartz);
-
-	if (intp == NULL)
-		return STV0900_INVALID_HANDLE;
-
-	if (intp->errs)
-		return STV0900_I2C_ERROR;
-
-	clk_sel = ((stv0900_get_bits(intp, F0900_SELX1RATIO) == 1) ? 4 : 6);
-	m_div = ((clk_sel * mclk) / intp->quartz) - 1;
-	stv0900_write_bits(intp, F0900_M_DIV, m_div);
-	intp->mclk = stv0900_get_mclk_freq(intp,
-					intp->quartz);
-
-	/*Set the DiseqC frequency to 22KHz */
-	/*
-		Formula:
-		DiseqC_TX_Freq= MasterClock/(32*F22TX_Reg)
-		DiseqC_RX_Freq= MasterClock/(32*F22RX_Reg)
-	*/
-	m_div = intp->mclk / 704000;
-	stv0900_write_reg(intp, R0900_P1_F22TX, m_div);
-	stv0900_write_reg(intp, R0900_P1_F22RX, m_div);
-
-	stv0900_write_reg(intp, R0900_P2_F22TX, m_div);
-	stv0900_write_reg(intp, R0900_P2_F22RX, m_div);
-
-	if ((intp->errs))
-		return STV0900_I2C_ERROR;
-
-	return STV0900_NO_ERROR;
-}
-
-static u32 stv0900_get_err_count(struct stv0900_internal *intp, int cntr,
-					enum fe_stv0900_demod_num demod)
-{
-	u32 lsb, msb, hsb, err_val;
-
-	switch (cntr) {
-	case 0:
-	default:
-		hsb = stv0900_get_bits(intp, ERR_CNT12);
-		msb = stv0900_get_bits(intp, ERR_CNT11);
-		lsb = stv0900_get_bits(intp, ERR_CNT10);
-		break;
-	case 1:
-		hsb = stv0900_get_bits(intp, ERR_CNT22);
-		msb = stv0900_get_bits(intp, ERR_CNT21);
-		lsb = stv0900_get_bits(intp, ERR_CNT20);
-		break;
-	}
-
-	err_val = (hsb << 16) + (msb << 8) + (lsb);
-
-	return err_val;
-}
-
-static int stv0900_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *intp = state->internal;
-	enum fe_stv0900_demod_num demod = state->demod;
-
-	stv0900_write_bits(intp, I2CT_ON, enable);
-
-	return 0;
-}
-
-static void stv0900_set_ts_parallel_serial(struct stv0900_internal *intp,
-					enum fe_stv0900_clock_type path1_ts,
-					enum fe_stv0900_clock_type path2_ts)
-{
-
-	dprintk("%s\n", __func__);
-
-	if (intp->chip_id >= 0x20) {
-		switch (path1_ts) {
-		case STV0900_PARALLEL_PUNCT_CLOCK:
-		case STV0900_DVBCI_CLOCK:
-			switch (path2_ts) {
-			case STV0900_SERIAL_PUNCT_CLOCK:
-			case STV0900_SERIAL_CONT_CLOCK:
-			default:
-				stv0900_write_reg(intp, R0900_TSGENERAL,
-							0x00);
-				break;
-			case STV0900_PARALLEL_PUNCT_CLOCK:
-			case STV0900_DVBCI_CLOCK:
-				stv0900_write_reg(intp, R0900_TSGENERAL,
-							0x06);
-				stv0900_write_bits(intp,
-						F0900_P1_TSFIFO_MANSPEED, 3);
-				stv0900_write_bits(intp,
-						F0900_P2_TSFIFO_MANSPEED, 0);
-				stv0900_write_reg(intp,
-						R0900_P1_TSSPEED, 0x14);
-				stv0900_write_reg(intp,
-						R0900_P2_TSSPEED, 0x28);
-				break;
-			}
-			break;
-		case STV0900_SERIAL_PUNCT_CLOCK:
-		case STV0900_SERIAL_CONT_CLOCK:
-		default:
-			switch (path2_ts) {
-			case STV0900_SERIAL_PUNCT_CLOCK:
-			case STV0900_SERIAL_CONT_CLOCK:
-			default:
-				stv0900_write_reg(intp,
-						R0900_TSGENERAL, 0x0C);
-				break;
-			case STV0900_PARALLEL_PUNCT_CLOCK:
-			case STV0900_DVBCI_CLOCK:
-				stv0900_write_reg(intp,
-						R0900_TSGENERAL, 0x0A);
-				dprintk("%s: 0x0a\n", __func__);
-				break;
-			}
-			break;
-		}
-	} else {
-		switch (path1_ts) {
-		case STV0900_PARALLEL_PUNCT_CLOCK:
-		case STV0900_DVBCI_CLOCK:
-			switch (path2_ts) {
-			case STV0900_SERIAL_PUNCT_CLOCK:
-			case STV0900_SERIAL_CONT_CLOCK:
-			default:
-				stv0900_write_reg(intp, R0900_TSGENERAL1X,
-							0x10);
-				break;
-			case STV0900_PARALLEL_PUNCT_CLOCK:
-			case STV0900_DVBCI_CLOCK:
-				stv0900_write_reg(intp, R0900_TSGENERAL1X,
-							0x16);
-				stv0900_write_bits(intp,
-						F0900_P1_TSFIFO_MANSPEED, 3);
-				stv0900_write_bits(intp,
-						F0900_P2_TSFIFO_MANSPEED, 0);
-				stv0900_write_reg(intp, R0900_P1_TSSPEED,
-							0x14);
-				stv0900_write_reg(intp, R0900_P2_TSSPEED,
-							0x28);
-				break;
-			}
-
-			break;
-		case STV0900_SERIAL_PUNCT_CLOCK:
-		case STV0900_SERIAL_CONT_CLOCK:
-		default:
-			switch (path2_ts) {
-			case STV0900_SERIAL_PUNCT_CLOCK:
-			case STV0900_SERIAL_CONT_CLOCK:
-			default:
-				stv0900_write_reg(intp, R0900_TSGENERAL1X,
-							0x14);
-				break;
-			case STV0900_PARALLEL_PUNCT_CLOCK:
-			case STV0900_DVBCI_CLOCK:
-				stv0900_write_reg(intp, R0900_TSGENERAL1X,
-							0x12);
-				dprintk("%s: 0x12\n", __func__);
-				break;
-			}
-
-			break;
-		}
-	}
-
-	switch (path1_ts) {
-	case STV0900_PARALLEL_PUNCT_CLOCK:
-		stv0900_write_bits(intp, F0900_P1_TSFIFO_SERIAL, 0x00);
-		stv0900_write_bits(intp, F0900_P1_TSFIFO_DVBCI, 0x00);
-		break;
-	case STV0900_DVBCI_CLOCK:
-		stv0900_write_bits(intp, F0900_P1_TSFIFO_SERIAL, 0x00);
-		stv0900_write_bits(intp, F0900_P1_TSFIFO_DVBCI, 0x01);
-		break;
-	case STV0900_SERIAL_PUNCT_CLOCK:
-		stv0900_write_bits(intp, F0900_P1_TSFIFO_SERIAL, 0x01);
-		stv0900_write_bits(intp, F0900_P1_TSFIFO_DVBCI, 0x00);
-		break;
-	case STV0900_SERIAL_CONT_CLOCK:
-		stv0900_write_bits(intp, F0900_P1_TSFIFO_SERIAL, 0x01);
-		stv0900_write_bits(intp, F0900_P1_TSFIFO_DVBCI, 0x01);
-		break;
-	default:
-		break;
-	}
-
-	switch (path2_ts) {
-	case STV0900_PARALLEL_PUNCT_CLOCK:
-		stv0900_write_bits(intp, F0900_P2_TSFIFO_SERIAL, 0x00);
-		stv0900_write_bits(intp, F0900_P2_TSFIFO_DVBCI, 0x00);
-		break;
-	case STV0900_DVBCI_CLOCK:
-		stv0900_write_bits(intp, F0900_P2_TSFIFO_SERIAL, 0x00);
-		stv0900_write_bits(intp, F0900_P2_TSFIFO_DVBCI, 0x01);
-		break;
-	case STV0900_SERIAL_PUNCT_CLOCK:
-		stv0900_write_bits(intp, F0900_P2_TSFIFO_SERIAL, 0x01);
-		stv0900_write_bits(intp, F0900_P2_TSFIFO_DVBCI, 0x00);
-		break;
-	case STV0900_SERIAL_CONT_CLOCK:
-		stv0900_write_bits(intp, F0900_P2_TSFIFO_SERIAL, 0x01);
-		stv0900_write_bits(intp, F0900_P2_TSFIFO_DVBCI, 0x01);
-		break;
-	default:
-		break;
-	}
-
-	stv0900_write_bits(intp, F0900_P2_RST_HWARE, 1);
-	stv0900_write_bits(intp, F0900_P2_RST_HWARE, 0);
-	stv0900_write_bits(intp, F0900_P1_RST_HWARE, 1);
-	stv0900_write_bits(intp, F0900_P1_RST_HWARE, 0);
-}
-
-void stv0900_set_tuner(struct dvb_frontend *fe, u32 frequency,
-							u32 bandwidth)
-{
-	struct dvb_frontend_ops *frontend_ops = NULL;
-	struct dvb_tuner_ops *tuner_ops = NULL;
-
-	if (&fe->ops)
-		frontend_ops = &fe->ops;
-
-	if (&frontend_ops->tuner_ops)
-		tuner_ops = &frontend_ops->tuner_ops;
-
-	if (tuner_ops->set_frequency) {
-		if ((tuner_ops->set_frequency(fe, frequency)) < 0)
-			dprintk("%s: Invalid parameter\n", __func__);
-		else
-			dprintk("%s: Frequency=%d\n", __func__, frequency);
-
-	}
-
-	if (tuner_ops->set_bandwidth) {
-		if ((tuner_ops->set_bandwidth(fe, bandwidth)) < 0)
-			dprintk("%s: Invalid parameter\n", __func__);
-		else
-			dprintk("%s: Bandwidth=%d\n", __func__, bandwidth);
-
-	}
-}
-
-void stv0900_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth)
-{
-	struct dvb_frontend_ops *frontend_ops = NULL;
-	struct dvb_tuner_ops *tuner_ops = NULL;
-
-	if (&fe->ops)
-		frontend_ops = &fe->ops;
-
-	if (&frontend_ops->tuner_ops)
-		tuner_ops = &frontend_ops->tuner_ops;
-
-	if (tuner_ops->set_bandwidth) {
-		if ((tuner_ops->set_bandwidth(fe, bandwidth)) < 0)
-			dprintk("%s: Invalid parameter\n", __func__);
-		else
-			dprintk("%s: Bandwidth=%d\n", __func__, bandwidth);
-
-	}
-}
-
-u32 stv0900_get_freq_auto(struct stv0900_internal *intp, int demod)
-{
-	u32 freq, round;
-	/*	Formulat :
-	Tuner_Frequency(MHz)	= Regs / 64
-	Tuner_granularity(MHz)	= Regs / 2048
-	real_Tuner_Frequency	= Tuner_Frequency(MHz) - Tuner_granularity(MHz)
-	*/
-	freq = (stv0900_get_bits(intp, TUN_RFFREQ2) << 10) +
-		(stv0900_get_bits(intp, TUN_RFFREQ1) << 2) +
-		stv0900_get_bits(intp, TUN_RFFREQ0);
-
-	freq = (freq * 1000) / 64;
-
-	round = (stv0900_get_bits(intp, TUN_RFRESTE1) >> 2) +
-		stv0900_get_bits(intp, TUN_RFRESTE0);
-
-	round = (round * 1000) / 2048;
-
-	return freq + round;
-}
-
-void stv0900_set_tuner_auto(struct stv0900_internal *intp, u32 Frequency,
-						u32 Bandwidth, int demod)
-{
-	u32 tunerFrequency;
-	/* Formulat:
-	Tuner_frequency_reg= Frequency(MHz)*64
-	*/
-	tunerFrequency = (Frequency * 64) / 1000;
-
-	stv0900_write_bits(intp, TUN_RFFREQ2, (tunerFrequency >> 10));
-	stv0900_write_bits(intp, TUN_RFFREQ1, (tunerFrequency >> 2) & 0xff);
-	stv0900_write_bits(intp, TUN_RFFREQ0, (tunerFrequency & 0x03));
-	/* Low Pass Filter = BW /2 (MHz)*/
-	stv0900_write_bits(intp, TUN_BW, Bandwidth / 2000000);
-	/* Tuner Write trig */
-	stv0900_write_reg(intp, TNRLD, 1);
-}
-
-static s32 stv0900_get_rf_level(struct stv0900_internal *intp,
-				const struct stv0900_table *lookup,
-				enum fe_stv0900_demod_num demod)
-{
-	s32 agc_gain = 0,
-		imin,
-		imax,
-		i,
-		rf_lvl = 0;
-
-	dprintk("%s\n", __func__);
-
-	if ((lookup == NULL) || (lookup->size <= 0))
-		return 0;
-
-	agc_gain = MAKEWORD(stv0900_get_bits(intp, AGCIQ_VALUE1),
-				stv0900_get_bits(intp, AGCIQ_VALUE0));
-
-	imin = 0;
-	imax = lookup->size - 1;
-	if (INRANGE(lookup->table[imin].regval, agc_gain,
-					lookup->table[imax].regval)) {
-		while ((imax - imin) > 1) {
-			i = (imax + imin) >> 1;
-
-			if (INRANGE(lookup->table[imin].regval,
-					agc_gain,
-					lookup->table[i].regval))
-				imax = i;
-			else
-				imin = i;
-		}
-
-		rf_lvl = (s32)agc_gain - lookup->table[imin].regval;
-		rf_lvl *= (lookup->table[imax].realval -
-				lookup->table[imin].realval);
-		rf_lvl /= (lookup->table[imax].regval -
-				lookup->table[imin].regval);
-		rf_lvl += lookup->table[imin].realval;
-	} else if (agc_gain > lookup->table[0].regval)
-		rf_lvl = 5;
-	else if (agc_gain < lookup->table[lookup->size-1].regval)
-		rf_lvl = -100;
-
-	dprintk("%s: RFLevel = %d\n", __func__, rf_lvl);
-
-	return rf_lvl;
-}
-
-static int stv0900_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *internal = state->internal;
-	s32 rflevel = stv0900_get_rf_level(internal, &stv0900_rf,
-								state->demod);
-
-	rflevel = (rflevel + 100) * (65535 / 70);
-	if (rflevel < 0)
-		rflevel = 0;
-
-	if (rflevel > 65535)
-		rflevel = 65535;
-
-	*strength = rflevel;
-
-	return 0;
-}
-
-static s32 stv0900_carr_get_quality(struct dvb_frontend *fe,
-					const struct stv0900_table *lookup)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *intp = state->internal;
-	enum fe_stv0900_demod_num demod = state->demod;
-
-	s32	c_n = -100,
-		regval,
-		imin,
-		imax,
-		i,
-		noise_field1,
-		noise_field0;
-
-	dprintk("%s\n", __func__);
-
-	if (stv0900_get_standard(fe, demod) == STV0900_DVBS2_STANDARD) {
-		noise_field1 = NOSPLHT_NORMED1;
-		noise_field0 = NOSPLHT_NORMED0;
-	} else {
-		noise_field1 = NOSDATAT_NORMED1;
-		noise_field0 = NOSDATAT_NORMED0;
-	}
-
-	if (stv0900_get_bits(intp, LOCK_DEFINITIF)) {
-		if ((lookup != NULL) && lookup->size) {
-			regval = 0;
-			msleep(5);
-			for (i = 0; i < 16; i++) {
-				regval += MAKEWORD(stv0900_get_bits(intp,
-								noise_field1),
-						stv0900_get_bits(intp,
-								noise_field0));
-				msleep(1);
-			}
-
-			regval /= 16;
-			imin = 0;
-			imax = lookup->size - 1;
-			if (INRANGE(lookup->table[imin].regval,
-					regval,
-					lookup->table[imax].regval)) {
-				while ((imax - imin) > 1) {
-					i = (imax + imin) >> 1;
-					if (INRANGE(lookup->table[imin].regval,
-						    regval,
-						    lookup->table[i].regval))
-						imax = i;
-					else
-						imin = i;
-				}
-
-				c_n = ((regval - lookup->table[imin].regval)
-						* (lookup->table[imax].realval
-						- lookup->table[imin].realval)
-						/ (lookup->table[imax].regval
-						- lookup->table[imin].regval))
-						+ lookup->table[imin].realval;
-			} else if (regval < lookup->table[imin].regval)
-				c_n = 1000;
-		}
-	}
-
-	return c_n;
-}
-
-static int stv0900_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *intp = state->internal;
-	enum fe_stv0900_demod_num demod = state->demod;
-	u8 err_val1, err_val0;
-	u32 header_err_val = 0;
-
-	*ucblocks = 0x0;
-	if (stv0900_get_standard(fe, demod) == STV0900_DVBS2_STANDARD) {
-		/* DVB-S2 delineator errors count */
-
-		/* retreiving number for errnous headers */
-		err_val1 = stv0900_read_reg(intp, BBFCRCKO1);
-		err_val0 = stv0900_read_reg(intp, BBFCRCKO0);
-		header_err_val = (err_val1 << 8) | err_val0;
-
-		/* retreiving number for errnous packets */
-		err_val1 = stv0900_read_reg(intp, UPCRCKO1);
-		err_val0 = stv0900_read_reg(intp, UPCRCKO0);
-		*ucblocks = (err_val1 << 8) | err_val0;
-		*ucblocks += header_err_val;
-	}
-
-	return 0;
-}
-
-static int stv0900_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	s32 snrlcl = stv0900_carr_get_quality(fe,
-			(const struct stv0900_table *)&stv0900_s2_cn);
-	snrlcl = (snrlcl + 30) * 384;
-	if (snrlcl < 0)
-		snrlcl = 0;
-
-	if (snrlcl > 65535)
-		snrlcl = 65535;
-
-	*snr = snrlcl;
-
-	return 0;
-}
-
-static u32 stv0900_get_ber(struct stv0900_internal *intp,
-				enum fe_stv0900_demod_num demod)
-{
-	u32 ber = 10000000, i;
-	s32 demod_state;
-
-	demod_state = stv0900_get_bits(intp, HEADER_MODE);
-
-	switch (demod_state) {
-	case STV0900_SEARCH:
-	case STV0900_PLH_DETECTED:
-	default:
-		ber = 10000000;
-		break;
-	case STV0900_DVBS_FOUND:
-		ber = 0;
-		for (i = 0; i < 5; i++) {
-			msleep(5);
-			ber += stv0900_get_err_count(intp, 0, demod);
-		}
-
-		ber /= 5;
-		if (stv0900_get_bits(intp, PRFVIT)) {
-			ber *= 9766;
-			ber = ber >> 13;
-		}
-
-		break;
-	case STV0900_DVBS2_FOUND:
-		ber = 0;
-		for (i = 0; i < 5; i++) {
-			msleep(5);
-			ber += stv0900_get_err_count(intp, 0, demod);
-		}
-
-		ber /= 5;
-		if (stv0900_get_bits(intp, PKTDELIN_LOCK)) {
-			ber *= 9766;
-			ber = ber >> 13;
-		}
-
-		break;
-	}
-
-	return ber;
-}
-
-static int stv0900_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *internal = state->internal;
-
-	*ber = stv0900_get_ber(internal, state->demod);
-
-	return 0;
-}
-
-int stv0900_get_demod_lock(struct stv0900_internal *intp,
-			enum fe_stv0900_demod_num demod, s32 time_out)
-{
-	s32 timer = 0,
-		lock = 0;
-
-	enum fe_stv0900_search_state	dmd_state;
-
-	while ((timer < time_out) && (lock == 0)) {
-		dmd_state = stv0900_get_bits(intp, HEADER_MODE);
-		dprintk("Demod State = %d\n", dmd_state);
-		switch (dmd_state) {
-		case STV0900_SEARCH:
-		case STV0900_PLH_DETECTED:
-		default:
-			lock = 0;
-			break;
-		case STV0900_DVBS2_FOUND:
-		case STV0900_DVBS_FOUND:
-			lock = stv0900_get_bits(intp, LOCK_DEFINITIF);
-			break;
-		}
-
-		if (lock == 0)
-			msleep(10);
-
-		timer += 10;
-	}
-
-	if (lock)
-		dprintk("DEMOD LOCK OK\n");
-	else
-		dprintk("DEMOD LOCK FAIL\n");
-
-	return lock;
-}
-
-void stv0900_stop_all_s2_modcod(struct stv0900_internal *intp,
-				enum fe_stv0900_demod_num demod)
-{
-	s32 regflist,
-	i;
-
-	dprintk("%s\n", __func__);
-
-	regflist = MODCODLST0;
-
-	for (i = 0; i < 16; i++)
-		stv0900_write_reg(intp, regflist + i, 0xff);
-}
-
-void stv0900_activate_s2_modcod(struct stv0900_internal *intp,
-				enum fe_stv0900_demod_num demod)
-{
-	u32 matype,
-		mod_code,
-		fmod,
-		reg_index,
-		field_index;
-
-	dprintk("%s\n", __func__);
-
-	if (intp->chip_id <= 0x11) {
-		msleep(5);
-
-		mod_code = stv0900_read_reg(intp, PLHMODCOD);
-		matype = mod_code & 0x3;
-		mod_code = (mod_code & 0x7f) >> 2;
-
-		reg_index = MODCODLSTF - mod_code / 2;
-		field_index = mod_code % 2;
-
-		switch (matype) {
-		case 0:
-		default:
-			fmod = 14;
-			break;
-		case 1:
-			fmod = 13;
-			break;
-		case 2:
-			fmod = 11;
-			break;
-		case 3:
-			fmod = 7;
-			break;
-		}
-
-		if ((INRANGE(STV0900_QPSK_12, mod_code, STV0900_8PSK_910))
-						&& (matype <= 1)) {
-			if (field_index == 0)
-				stv0900_write_reg(intp, reg_index,
-							0xf0 | fmod);
-			else
-				stv0900_write_reg(intp, reg_index,
-							(fmod << 4) | 0xf);
-		}
-
-	} else if (intp->chip_id >= 0x12) {
-		for (reg_index = 0; reg_index < 7; reg_index++)
-			stv0900_write_reg(intp, MODCODLST0 + reg_index, 0xff);
-
-		stv0900_write_reg(intp, MODCODLSTE, 0xff);
-		stv0900_write_reg(intp, MODCODLSTF, 0xcf);
-		for (reg_index = 0; reg_index < 8; reg_index++)
-			stv0900_write_reg(intp, MODCODLST7 + reg_index, 0xcc);
-
-
-	}
-}
-
-void stv0900_activate_s2_modcod_single(struct stv0900_internal *intp,
-					enum fe_stv0900_demod_num demod)
-{
-	u32 reg_index;
-
-	dprintk("%s\n", __func__);
-
-	stv0900_write_reg(intp, MODCODLST0, 0xff);
-	stv0900_write_reg(intp, MODCODLST1, 0xf0);
-	stv0900_write_reg(intp, MODCODLSTF, 0x0f);
-	for (reg_index = 0; reg_index < 13; reg_index++)
-		stv0900_write_reg(intp, MODCODLST2 + reg_index, 0);
-
-}
-
-static enum dvbfe_algo stv0900_frontend_algo(struct dvb_frontend *fe)
-{
-	return DVBFE_ALGO_CUSTOM;
-}
-
-void stv0900_start_search(struct stv0900_internal *intp,
-				enum fe_stv0900_demod_num demod)
-{
-	u32 freq;
-	s16 freq_s16 ;
-
-	stv0900_write_bits(intp, DEMOD_MODE, 0x1f);
-	if (intp->chip_id == 0x10)
-		stv0900_write_reg(intp, CORRELEXP, 0xaa);
-
-	if (intp->chip_id < 0x20)
-		stv0900_write_reg(intp, CARHDR, 0x55);
-
-	if (intp->chip_id <= 0x20) {
-		if (intp->symbol_rate[0] <= 5000000) {
-			stv0900_write_reg(intp, CARCFG, 0x44);
-			stv0900_write_reg(intp, CFRUP1, 0x0f);
-			stv0900_write_reg(intp, CFRUP0, 0xff);
-			stv0900_write_reg(intp, CFRLOW1, 0xf0);
-			stv0900_write_reg(intp, CFRLOW0, 0x00);
-			stv0900_write_reg(intp, RTCS2, 0x68);
-		} else {
-			stv0900_write_reg(intp, CARCFG, 0xc4);
-			stv0900_write_reg(intp, RTCS2, 0x44);
-		}
-
-	} else { /*cut 3.0 above*/
-		if (intp->symbol_rate[demod] <= 5000000)
-			stv0900_write_reg(intp, RTCS2, 0x68);
-		else
-			stv0900_write_reg(intp, RTCS2, 0x44);
-
-		stv0900_write_reg(intp, CARCFG, 0x46);
-		if (intp->srch_algo[demod] == STV0900_WARM_START) {
-			freq = 1000 << 16;
-			freq /= (intp->mclk / 1000);
-			freq_s16 = (s16)freq;
-		} else {
-			freq = (intp->srch_range[demod] / 2000);
-			if (intp->symbol_rate[demod] <= 5000000)
-				freq += 80;
-			else
-				freq += 600;
-
-			freq = freq << 16;
-			freq /= (intp->mclk / 1000);
-			freq_s16 = (s16)freq;
-		}
-
-		stv0900_write_bits(intp, CFR_UP1, MSB(freq_s16));
-		stv0900_write_bits(intp, CFR_UP0, LSB(freq_s16));
-		freq_s16 *= (-1);
-		stv0900_write_bits(intp, CFR_LOW1, MSB(freq_s16));
-		stv0900_write_bits(intp, CFR_LOW0, LSB(freq_s16));
-	}
-
-	stv0900_write_reg(intp, CFRINIT1, 0);
-	stv0900_write_reg(intp, CFRINIT0, 0);
-
-	if (intp->chip_id >= 0x20) {
-		stv0900_write_reg(intp, EQUALCFG, 0x41);
-		stv0900_write_reg(intp, FFECFG, 0x41);
-
-		if ((intp->srch_standard[demod] == STV0900_SEARCH_DVBS1) ||
-			(intp->srch_standard[demod] == STV0900_SEARCH_DSS) ||
-			(intp->srch_standard[demod] == STV0900_AUTO_SEARCH)) {
-			stv0900_write_reg(intp, VITSCALE,
-								0x82);
-			stv0900_write_reg(intp, VAVSRVIT, 0x0);
-		}
-	}
-
-	stv0900_write_reg(intp, SFRSTEP, 0x00);
-	stv0900_write_reg(intp, TMGTHRISE, 0xe0);
-	stv0900_write_reg(intp, TMGTHFALL, 0xc0);
-	stv0900_write_bits(intp, SCAN_ENABLE, 0);
-	stv0900_write_bits(intp, CFR_AUTOSCAN, 0);
-	stv0900_write_bits(intp, S1S2_SEQUENTIAL, 0);
-	stv0900_write_reg(intp, RTC, 0x88);
-	if (intp->chip_id >= 0x20) {
-		if (intp->symbol_rate[demod] < 2000000) {
-			if (intp->chip_id <= 0x20)
-				stv0900_write_reg(intp, CARFREQ, 0x39);
-			else  /*cut 3.0*/
-				stv0900_write_reg(intp, CARFREQ, 0x89);
-
-			stv0900_write_reg(intp, CARHDR, 0x40);
-		} else if (intp->symbol_rate[demod] < 10000000) {
-			stv0900_write_reg(intp, CARFREQ, 0x4c);
-			stv0900_write_reg(intp, CARHDR, 0x20);
-		} else {
-			stv0900_write_reg(intp, CARFREQ, 0x4b);
-			stv0900_write_reg(intp, CARHDR, 0x20);
-		}
-
-	} else {
-		if (intp->symbol_rate[demod] < 10000000)
-			stv0900_write_reg(intp, CARFREQ, 0xef);
-		else
-			stv0900_write_reg(intp, CARFREQ, 0xed);
-	}
-
-	switch (intp->srch_algo[demod]) {
-	case STV0900_WARM_START:
-		stv0900_write_reg(intp, DMDISTATE, 0x1f);
-		stv0900_write_reg(intp, DMDISTATE, 0x18);
-		break;
-	case STV0900_COLD_START:
-		stv0900_write_reg(intp, DMDISTATE, 0x1f);
-		stv0900_write_reg(intp, DMDISTATE, 0x15);
-		break;
-	default:
-		break;
-	}
-}
-
-u8 stv0900_get_optim_carr_loop(s32 srate, enum fe_stv0900_modcode modcode,
-							s32 pilot, u8 chip_id)
-{
-	u8 aclc_value = 0x29;
-	s32 i;
-	const struct stv0900_car_loop_optim *cls2, *cllqs2, *cllas2;
-
-	dprintk("%s\n", __func__);
-
-	if (chip_id <= 0x12) {
-		cls2 = FE_STV0900_S2CarLoop;
-		cllqs2 = FE_STV0900_S2LowQPCarLoopCut30;
-		cllas2 = FE_STV0900_S2APSKCarLoopCut30;
-	} else if (chip_id == 0x20) {
-		cls2 = FE_STV0900_S2CarLoopCut20;
-		cllqs2 = FE_STV0900_S2LowQPCarLoopCut20;
-		cllas2 = FE_STV0900_S2APSKCarLoopCut20;
-	} else {
-		cls2 = FE_STV0900_S2CarLoopCut30;
-		cllqs2 = FE_STV0900_S2LowQPCarLoopCut30;
-		cllas2 = FE_STV0900_S2APSKCarLoopCut30;
-	}
-
-	if (modcode < STV0900_QPSK_12) {
-		i = 0;
-		while ((i < 3) && (modcode != cllqs2[i].modcode))
-			i++;
-
-		if (i >= 3)
-			i = 2;
-	} else {
-		i = 0;
-		while ((i < 14) && (modcode != cls2[i].modcode))
-			i++;
-
-		if (i >= 14) {
-			i = 0;
-			while ((i < 11) && (modcode != cllas2[i].modcode))
-				i++;
-
-			if (i >= 11)
-				i = 10;
-		}
-	}
-
-	if (modcode <= STV0900_QPSK_25) {
-		if (pilot) {
-			if (srate <= 3000000)
-				aclc_value = cllqs2[i].car_loop_pilots_on_2;
-			else if (srate <= 7000000)
-				aclc_value = cllqs2[i].car_loop_pilots_on_5;
-			else if (srate <= 15000000)
-				aclc_value = cllqs2[i].car_loop_pilots_on_10;
-			else if (srate <= 25000000)
-				aclc_value = cllqs2[i].car_loop_pilots_on_20;
-			else
-				aclc_value = cllqs2[i].car_loop_pilots_on_30;
-		} else {
-			if (srate <= 3000000)
-				aclc_value = cllqs2[i].car_loop_pilots_off_2;
-			else if (srate <= 7000000)
-				aclc_value = cllqs2[i].car_loop_pilots_off_5;
-			else if (srate <= 15000000)
-				aclc_value = cllqs2[i].car_loop_pilots_off_10;
-			else if (srate <= 25000000)
-				aclc_value = cllqs2[i].car_loop_pilots_off_20;
-			else
-				aclc_value = cllqs2[i].car_loop_pilots_off_30;
-		}
-
-	} else if (modcode <= STV0900_8PSK_910) {
-		if (pilot) {
-			if (srate <= 3000000)
-				aclc_value = cls2[i].car_loop_pilots_on_2;
-			else if (srate <= 7000000)
-				aclc_value = cls2[i].car_loop_pilots_on_5;
-			else if (srate <= 15000000)
-				aclc_value = cls2[i].car_loop_pilots_on_10;
-			else if (srate <= 25000000)
-				aclc_value = cls2[i].car_loop_pilots_on_20;
-			else
-				aclc_value = cls2[i].car_loop_pilots_on_30;
-		} else {
-			if (srate <= 3000000)
-				aclc_value = cls2[i].car_loop_pilots_off_2;
-			else if (srate <= 7000000)
-				aclc_value = cls2[i].car_loop_pilots_off_5;
-			else if (srate <= 15000000)
-				aclc_value = cls2[i].car_loop_pilots_off_10;
-			else if (srate <= 25000000)
-				aclc_value = cls2[i].car_loop_pilots_off_20;
-			else
-				aclc_value = cls2[i].car_loop_pilots_off_30;
-		}
-
-	} else {
-		if (srate <= 3000000)
-			aclc_value = cllas2[i].car_loop_pilots_on_2;
-		else if (srate <= 7000000)
-			aclc_value = cllas2[i].car_loop_pilots_on_5;
-		else if (srate <= 15000000)
-			aclc_value = cllas2[i].car_loop_pilots_on_10;
-		else if (srate <= 25000000)
-			aclc_value = cllas2[i].car_loop_pilots_on_20;
-		else
-			aclc_value = cllas2[i].car_loop_pilots_on_30;
-	}
-
-	return aclc_value;
-}
-
-u8 stv0900_get_optim_short_carr_loop(s32 srate,
-				enum fe_stv0900_modulation modulation,
-				u8 chip_id)
-{
-	const struct stv0900_short_frames_car_loop_optim *s2scl;
-	const struct stv0900_short_frames_car_loop_optim_vs_mod *s2sclc30;
-	s32 mod_index = 0;
-	u8 aclc_value = 0x0b;
-
-	dprintk("%s\n", __func__);
-
-	s2scl = FE_STV0900_S2ShortCarLoop;
-	s2sclc30 = FE_STV0900_S2ShortCarLoopCut30;
-
-	switch (modulation) {
-	case STV0900_QPSK:
-	default:
-		mod_index = 0;
-		break;
-	case STV0900_8PSK:
-		mod_index = 1;
-		break;
-	case STV0900_16APSK:
-		mod_index = 2;
-		break;
-	case STV0900_32APSK:
-		mod_index = 3;
-		break;
-	}
-
-	if (chip_id >= 0x30) {
-		if (srate <= 3000000)
-			aclc_value = s2sclc30[mod_index].car_loop_2;
-		else if (srate <= 7000000)
-			aclc_value = s2sclc30[mod_index].car_loop_5;
-		else if (srate <= 15000000)
-			aclc_value = s2sclc30[mod_index].car_loop_10;
-		else if (srate <= 25000000)
-			aclc_value = s2sclc30[mod_index].car_loop_20;
-		else
-			aclc_value = s2sclc30[mod_index].car_loop_30;
-
-	} else if (chip_id >= 0x20) {
-		if (srate <= 3000000)
-			aclc_value = s2scl[mod_index].car_loop_cut20_2;
-		else if (srate <= 7000000)
-			aclc_value = s2scl[mod_index].car_loop_cut20_5;
-		else if (srate <= 15000000)
-			aclc_value = s2scl[mod_index].car_loop_cut20_10;
-		else if (srate <= 25000000)
-			aclc_value = s2scl[mod_index].car_loop_cut20_20;
-		else
-			aclc_value = s2scl[mod_index].car_loop_cut20_30;
-
-	} else {
-		if (srate <= 3000000)
-			aclc_value = s2scl[mod_index].car_loop_cut12_2;
-		else if (srate <= 7000000)
-			aclc_value = s2scl[mod_index].car_loop_cut12_5;
-		else if (srate <= 15000000)
-			aclc_value = s2scl[mod_index].car_loop_cut12_10;
-		else if (srate <= 25000000)
-			aclc_value = s2scl[mod_index].car_loop_cut12_20;
-		else
-			aclc_value = s2scl[mod_index].car_loop_cut12_30;
-
-	}
-
-	return aclc_value;
-}
-
-static
-enum fe_stv0900_error stv0900_st_dvbs2_single(struct stv0900_internal *intp,
-					enum fe_stv0900_demod_mode LDPC_Mode,
-					enum fe_stv0900_demod_num demod)
-{
-	enum fe_stv0900_error error = STV0900_NO_ERROR;
-	s32 reg_ind;
-
-	dprintk("%s\n", __func__);
-
-	switch (LDPC_Mode) {
-	case STV0900_DUAL:
-	default:
-		if ((intp->demod_mode != STV0900_DUAL)
-			|| (stv0900_get_bits(intp, F0900_DDEMOD) != 1)) {
-			stv0900_write_reg(intp, R0900_GENCFG, 0x1d);
-
-			intp->demod_mode = STV0900_DUAL;
-
-			stv0900_write_bits(intp, F0900_FRESFEC, 1);
-			stv0900_write_bits(intp, F0900_FRESFEC, 0);
-
-			for (reg_ind = 0; reg_ind < 7; reg_ind++)
-				stv0900_write_reg(intp,
-						R0900_P1_MODCODLST0 + reg_ind,
-						0xff);
-			for (reg_ind = 0; reg_ind < 8; reg_ind++)
-				stv0900_write_reg(intp,
-						R0900_P1_MODCODLST7 + reg_ind,
-						0xcc);
-
-			stv0900_write_reg(intp, R0900_P1_MODCODLSTE, 0xff);
-			stv0900_write_reg(intp, R0900_P1_MODCODLSTF, 0xcf);
-
-			for (reg_ind = 0; reg_ind < 7; reg_ind++)
-				stv0900_write_reg(intp,
-						R0900_P2_MODCODLST0 + reg_ind,
-						0xff);
-			for (reg_ind = 0; reg_ind < 8; reg_ind++)
-				stv0900_write_reg(intp,
-						R0900_P2_MODCODLST7 + reg_ind,
-						0xcc);
-
-			stv0900_write_reg(intp, R0900_P2_MODCODLSTE, 0xff);
-			stv0900_write_reg(intp, R0900_P2_MODCODLSTF, 0xcf);
-		}
-
-		break;
-	case STV0900_SINGLE:
-		if (demod == STV0900_DEMOD_2) {
-			stv0900_stop_all_s2_modcod(intp, STV0900_DEMOD_1);
-			stv0900_activate_s2_modcod_single(intp,
-							STV0900_DEMOD_2);
-			stv0900_write_reg(intp, R0900_GENCFG, 0x06);
-		} else {
-			stv0900_stop_all_s2_modcod(intp, STV0900_DEMOD_2);
-			stv0900_activate_s2_modcod_single(intp,
-							STV0900_DEMOD_1);
-			stv0900_write_reg(intp, R0900_GENCFG, 0x04);
-		}
-
-		intp->demod_mode = STV0900_SINGLE;
-
-		stv0900_write_bits(intp, F0900_FRESFEC, 1);
-		stv0900_write_bits(intp, F0900_FRESFEC, 0);
-		stv0900_write_bits(intp, F0900_P1_ALGOSWRST, 1);
-		stv0900_write_bits(intp, F0900_P1_ALGOSWRST, 0);
-		stv0900_write_bits(intp, F0900_P2_ALGOSWRST, 1);
-		stv0900_write_bits(intp, F0900_P2_ALGOSWRST, 0);
-		break;
-	}
-
-	return error;
-}
-
-static enum fe_stv0900_error stv0900_init_internal(struct dvb_frontend *fe,
-					struct stv0900_init_params *p_init)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-	enum fe_stv0900_error error = STV0900_NO_ERROR;
-	enum fe_stv0900_error demodError = STV0900_NO_ERROR;
-	struct stv0900_internal *intp = NULL;
-	int selosci, i;
-
-	struct stv0900_inode *temp_int = find_inode(state->i2c_adap,
-						state->config->demod_address);
-
-	dprintk("%s\n", __func__);
-
-	if ((temp_int != NULL) && (p_init->demod_mode == STV0900_DUAL)) {
-		state->internal = temp_int->internal;
-		(state->internal->dmds_used)++;
-		dprintk("%s: Find Internal Structure!\n", __func__);
-		return STV0900_NO_ERROR;
-	} else {
-		state->internal = kmalloc(sizeof(struct stv0900_internal),
-								GFP_KERNEL);
-		if (state->internal == NULL)
-			return STV0900_INVALID_HANDLE;
-		temp_int = append_internal(state->internal);
-		if (temp_int == NULL) {
-			kfree(state->internal);
-			state->internal = NULL;
-			return STV0900_INVALID_HANDLE;
-		}
-		state->internal->dmds_used = 1;
-		state->internal->i2c_adap = state->i2c_adap;
-		state->internal->i2c_addr = state->config->demod_address;
-		state->internal->clkmode = state->config->clkmode;
-		state->internal->errs = STV0900_NO_ERROR;
-		dprintk("%s: Create New Internal Structure!\n", __func__);
-	}
-
-	if (state->internal == NULL) {
-		error = STV0900_INVALID_HANDLE;
-		return error;
-	}
-
-	demodError = stv0900_initialize(state->internal);
-	if (demodError == STV0900_NO_ERROR) {
-			error = STV0900_NO_ERROR;
-	} else {
-		if (demodError == STV0900_INVALID_HANDLE)
-			error = STV0900_INVALID_HANDLE;
-		else
-			error = STV0900_I2C_ERROR;
-
-		return error;
-	}
-
-	intp = state->internal;
-
-	intp->demod_mode = p_init->demod_mode;
-	stv0900_st_dvbs2_single(intp, intp->demod_mode,	STV0900_DEMOD_1);
-	intp->chip_id = stv0900_read_reg(intp, R0900_MID);
-	intp->rolloff = p_init->rolloff;
-	intp->quartz = p_init->dmd_ref_clk;
-
-	stv0900_write_bits(intp, F0900_P1_ROLLOFF_CONTROL, p_init->rolloff);
-	stv0900_write_bits(intp, F0900_P2_ROLLOFF_CONTROL, p_init->rolloff);
-
-	intp->ts_config = p_init->ts_config;
-	if (intp->ts_config == NULL)
-		stv0900_set_ts_parallel_serial(intp,
-				p_init->path1_ts_clock,
-				p_init->path2_ts_clock);
-	else {
-		for (i = 0; intp->ts_config[i].addr != 0xffff; i++)
-			stv0900_write_reg(intp,
-					intp->ts_config[i].addr,
-					intp->ts_config[i].val);
-
-		stv0900_write_bits(intp, F0900_P2_RST_HWARE, 1);
-		stv0900_write_bits(intp, F0900_P2_RST_HWARE, 0);
-		stv0900_write_bits(intp, F0900_P1_RST_HWARE, 1);
-		stv0900_write_bits(intp, F0900_P1_RST_HWARE, 0);
-	}
-
-	intp->tuner_type[0] = p_init->tuner1_type;
-	intp->tuner_type[1] = p_init->tuner2_type;
-	/* tuner init */
-	switch (p_init->tuner1_type) {
-	case 3: /*FE_AUTO_STB6100:*/
-		stv0900_write_reg(intp, R0900_P1_TNRCFG, 0x3c);
-		stv0900_write_reg(intp, R0900_P1_TNRCFG2, 0x86);
-		stv0900_write_reg(intp, R0900_P1_TNRCFG3, 0x18);
-		stv0900_write_reg(intp, R0900_P1_TNRXTAL, 27); /* 27MHz */
-		stv0900_write_reg(intp, R0900_P1_TNRSTEPS, 0x05);
-		stv0900_write_reg(intp, R0900_P1_TNRGAIN, 0x17);
-		stv0900_write_reg(intp, R0900_P1_TNRADJ, 0x1f);
-		stv0900_write_reg(intp, R0900_P1_TNRCTL2, 0x0);
-		stv0900_write_bits(intp, F0900_P1_TUN_TYPE, 3);
-		break;
-	/* case FE_SW_TUNER: */
-	default:
-		stv0900_write_bits(intp, F0900_P1_TUN_TYPE, 6);
-		break;
-	}
-
-	stv0900_write_bits(intp, F0900_P1_TUN_MADDRESS, p_init->tun1_maddress);
-	switch (p_init->tuner1_adc) {
-	case 1:
-		stv0900_write_reg(intp, R0900_TSTTNR1, 0x26);
-		break;
-	default:
-		break;
-	}
-
-	stv0900_write_reg(intp, R0900_P1_TNRLD, 1); /* hw tuner */
-
-	/* tuner init */
-	switch (p_init->tuner2_type) {
-	case 3: /*FE_AUTO_STB6100:*/
-		stv0900_write_reg(intp, R0900_P2_TNRCFG, 0x3c);
-		stv0900_write_reg(intp, R0900_P2_TNRCFG2, 0x86);
-		stv0900_write_reg(intp, R0900_P2_TNRCFG3, 0x18);
-		stv0900_write_reg(intp, R0900_P2_TNRXTAL, 27); /* 27MHz */
-		stv0900_write_reg(intp, R0900_P2_TNRSTEPS, 0x05);
-		stv0900_write_reg(intp, R0900_P2_TNRGAIN, 0x17);
-		stv0900_write_reg(intp, R0900_P2_TNRADJ, 0x1f);
-		stv0900_write_reg(intp, R0900_P2_TNRCTL2, 0x0);
-		stv0900_write_bits(intp, F0900_P2_TUN_TYPE, 3);
-		break;
-	/* case FE_SW_TUNER: */
-	default:
-		stv0900_write_bits(intp, F0900_P2_TUN_TYPE, 6);
-		break;
-	}
-
-	stv0900_write_bits(intp, F0900_P2_TUN_MADDRESS, p_init->tun2_maddress);
-	switch (p_init->tuner2_adc) {
-	case 1:
-		stv0900_write_reg(intp, R0900_TSTTNR3, 0x26);
-		break;
-	default:
-		break;
-	}
-
-	stv0900_write_reg(intp, R0900_P2_TNRLD, 1); /* hw tuner */
-
-	stv0900_write_bits(intp, F0900_P1_TUN_IQSWAP, p_init->tun1_iq_inv);
-	stv0900_write_bits(intp, F0900_P2_TUN_IQSWAP, p_init->tun2_iq_inv);
-	stv0900_set_mclk(intp, 135000000);
-	msleep(3);
-
-	switch (intp->clkmode) {
-	case 0:
-	case 2:
-		stv0900_write_reg(intp, R0900_SYNTCTRL, 0x20 | intp->clkmode);
-		break;
-	default:
-		selosci = 0x02 & stv0900_read_reg(intp, R0900_SYNTCTRL);
-		stv0900_write_reg(intp, R0900_SYNTCTRL, 0x20 | selosci);
-		break;
-	}
-	msleep(3);
-
-	intp->mclk = stv0900_get_mclk_freq(intp, intp->quartz);
-	if (intp->errs)
-		error = STV0900_I2C_ERROR;
-
-	return error;
-}
-
-static int stv0900_status(struct stv0900_internal *intp,
-					enum fe_stv0900_demod_num demod)
-{
-	enum fe_stv0900_search_state demod_state;
-	int locked = FALSE;
-	u8 tsbitrate0_val, tsbitrate1_val;
-	s32 bitrate;
-
-	demod_state = stv0900_get_bits(intp, HEADER_MODE);
-	switch (demod_state) {
-	case STV0900_SEARCH:
-	case STV0900_PLH_DETECTED:
-	default:
-		locked = FALSE;
-		break;
-	case STV0900_DVBS2_FOUND:
-		locked = stv0900_get_bits(intp, LOCK_DEFINITIF) &&
-				stv0900_get_bits(intp, PKTDELIN_LOCK) &&
-				stv0900_get_bits(intp, TSFIFO_LINEOK);
-		break;
-	case STV0900_DVBS_FOUND:
-		locked = stv0900_get_bits(intp, LOCK_DEFINITIF) &&
-				stv0900_get_bits(intp, LOCKEDVIT) &&
-				stv0900_get_bits(intp, TSFIFO_LINEOK);
-		break;
-	}
-
-	dprintk("%s: locked = %d\n", __func__, locked);
-
-	if (stvdebug) {
-		/* Print TS bitrate */
-		tsbitrate0_val = stv0900_read_reg(intp, TSBITRATE0);
-		tsbitrate1_val = stv0900_read_reg(intp, TSBITRATE1);
-		/* Formula Bit rate = Mclk * px_tsfifo_bitrate / 16384 */
-		bitrate = (stv0900_get_mclk_freq(intp, intp->quartz)/1000000)
-			* (tsbitrate1_val << 8 | tsbitrate0_val);
-		bitrate /= 16384;
-		dprintk("TS bitrate = %d Mbit/sec \n", bitrate);
-	};
-
-	return locked;
-}
-
-static enum dvbfe_search stv0900_search(struct dvb_frontend *fe)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *intp = state->internal;
-	enum fe_stv0900_demod_num demod = state->demod;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-
-	struct stv0900_search_params p_search;
-	struct stv0900_signal_info p_result = intp->result[demod];
-
-	enum fe_stv0900_error error = STV0900_NO_ERROR;
-
-	dprintk("%s: ", __func__);
-
-	if (!(INRANGE(100000, c->symbol_rate, 70000000)))
-		return DVBFE_ALGO_SEARCH_FAILED;
-
-	if (state->config->set_ts_params)
-		state->config->set_ts_params(fe, 0);
-
-	p_result.locked = FALSE;
-	p_search.path = demod;
-	p_search.frequency = c->frequency;
-	p_search.symbol_rate = c->symbol_rate;
-	p_search.search_range = 10000000;
-	p_search.fec = STV0900_FEC_UNKNOWN;
-	p_search.standard = STV0900_AUTO_SEARCH;
-	p_search.iq_inversion = STV0900_IQ_AUTO;
-	p_search.search_algo = STV0900_BLIND_SEARCH;
-	/* Speeds up DVB-S searching */
-	if (c->delivery_system == SYS_DVBS)
-		p_search.standard = STV0900_SEARCH_DVBS1;
-
-	intp->srch_standard[demod] = p_search.standard;
-	intp->symbol_rate[demod] = p_search.symbol_rate;
-	intp->srch_range[demod] = p_search.search_range;
-	intp->freq[demod] = p_search.frequency;
-	intp->srch_algo[demod] = p_search.search_algo;
-	intp->srch_iq_inv[demod] = p_search.iq_inversion;
-	intp->fec[demod] = p_search.fec;
-	if ((stv0900_algo(fe) == STV0900_RANGEOK) &&
-				(intp->errs == STV0900_NO_ERROR)) {
-		p_result.locked = intp->result[demod].locked;
-		p_result.standard = intp->result[demod].standard;
-		p_result.frequency = intp->result[demod].frequency;
-		p_result.symbol_rate = intp->result[demod].symbol_rate;
-		p_result.fec = intp->result[demod].fec;
-		p_result.modcode = intp->result[demod].modcode;
-		p_result.pilot = intp->result[demod].pilot;
-		p_result.frame_len = intp->result[demod].frame_len;
-		p_result.spectrum = intp->result[demod].spectrum;
-		p_result.rolloff = intp->result[demod].rolloff;
-		p_result.modulation = intp->result[demod].modulation;
-	} else {
-		p_result.locked = FALSE;
-		switch (intp->err[demod]) {
-		case STV0900_I2C_ERROR:
-			error = STV0900_I2C_ERROR;
-			break;
-		case STV0900_NO_ERROR:
-		default:
-			error = STV0900_SEARCH_FAILED;
-			break;
-		}
-	}
-
-	if ((p_result.locked == TRUE) && (error == STV0900_NO_ERROR)) {
-		dprintk("Search Success\n");
-		return DVBFE_ALGO_SEARCH_SUCCESS;
-	} else {
-		dprintk("Search Fail\n");
-		return DVBFE_ALGO_SEARCH_FAILED;
-	}
-
-}
-
-static int stv0900_read_status(struct dvb_frontend *fe, enum fe_status *status)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-
-	dprintk("%s: ", __func__);
-
-	if ((stv0900_status(state->internal, state->demod)) == TRUE) {
-		dprintk("DEMOD LOCK OK\n");
-		*status = FE_HAS_CARRIER
-			| FE_HAS_VITERBI
-			| FE_HAS_SYNC
-			| FE_HAS_LOCK;
-		if (state->config->set_lock_led)
-			state->config->set_lock_led(fe, 1);
-	} else {
-		*status = 0;
-		if (state->config->set_lock_led)
-			state->config->set_lock_led(fe, 0);
-		dprintk("DEMOD LOCK FAIL\n");
-	}
-
-	return 0;
-}
-
-static int stv0900_stop_ts(struct dvb_frontend *fe, int stop_ts)
-{
-
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *intp = state->internal;
-	enum fe_stv0900_demod_num demod = state->demod;
-
-	if (stop_ts == TRUE)
-		stv0900_write_bits(intp, RST_HWARE, 1);
-	else
-		stv0900_write_bits(intp, RST_HWARE, 0);
-
-	return 0;
-}
-
-static int stv0900_diseqc_init(struct dvb_frontend *fe)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *intp = state->internal;
-	enum fe_stv0900_demod_num demod = state->demod;
-
-	stv0900_write_bits(intp, DISTX_MODE, state->config->diseqc_mode);
-	stv0900_write_bits(intp, DISEQC_RESET, 1);
-	stv0900_write_bits(intp, DISEQC_RESET, 0);
-
-	return 0;
-}
-
-static int stv0900_init(struct dvb_frontend *fe)
-{
-	dprintk("%s\n", __func__);
-
-	stv0900_stop_ts(fe, 1);
-	stv0900_diseqc_init(fe);
-
-	return 0;
-}
-
-static int stv0900_diseqc_send(struct stv0900_internal *intp , u8 *data,
-				u32 NbData, enum fe_stv0900_demod_num demod)
-{
-	s32 i = 0;
-
-	stv0900_write_bits(intp, DIS_PRECHARGE, 1);
-	while (i < NbData) {
-		while (stv0900_get_bits(intp, FIFO_FULL))
-			;/* checkpatch complains */
-		stv0900_write_reg(intp, DISTXDATA, data[i]);
-		i++;
-	}
-
-	stv0900_write_bits(intp, DIS_PRECHARGE, 0);
-	i = 0;
-	while ((stv0900_get_bits(intp, TX_IDLE) != 1) && (i < 10)) {
-		msleep(10);
-		i++;
-	}
-
-	return 0;
-}
-
-static int stv0900_send_master_cmd(struct dvb_frontend *fe,
-					struct dvb_diseqc_master_cmd *cmd)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-
-	return stv0900_diseqc_send(state->internal,
-				cmd->msg,
-				cmd->msg_len,
-				state->demod);
-}
-
-static int stv0900_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t burst)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *intp = state->internal;
-	enum fe_stv0900_demod_num demod = state->demod;
-	u8 data;
-
-
-	switch (burst) {
-	case SEC_MINI_A:
-		stv0900_write_bits(intp, DISTX_MODE, 3);/* Unmodulated */
-		data = 0x00;
-		stv0900_diseqc_send(intp, &data, 1, state->demod);
-		break;
-	case SEC_MINI_B:
-		stv0900_write_bits(intp, DISTX_MODE, 2);/* Modulated */
-		data = 0xff;
-		stv0900_diseqc_send(intp, &data, 1, state->demod);
-		break;
-	}
-
-	return 0;
-}
-
-static int stv0900_recv_slave_reply(struct dvb_frontend *fe,
-				struct dvb_diseqc_slave_reply *reply)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *intp = state->internal;
-	enum fe_stv0900_demod_num demod = state->demod;
-	s32 i = 0;
-
-	reply->msg_len = 0;
-
-	while ((stv0900_get_bits(intp, RX_END) != 1) && (i < 10)) {
-		msleep(10);
-		i++;
-	}
-
-	if (stv0900_get_bits(intp, RX_END)) {
-		reply->msg_len = stv0900_get_bits(intp, FIFO_BYTENBR);
-
-		for (i = 0; i < reply->msg_len; i++)
-			reply->msg[i] = stv0900_read_reg(intp, DISRXDATA);
-	}
-
-	return 0;
-}
-
-static int stv0900_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t toneoff)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *intp = state->internal;
-	enum fe_stv0900_demod_num demod = state->demod;
-
-	dprintk("%s: %s\n", __func__, ((toneoff == 0) ? "On" : "Off"));
-
-	switch (toneoff) {
-	case SEC_TONE_ON:
-		/*Set the DiseqC mode to 22Khz _continues_ tone*/
-		stv0900_write_bits(intp, DISTX_MODE, 0);
-		stv0900_write_bits(intp, DISEQC_RESET, 1);
-		/*release DiseqC reset to enable the 22KHz tone*/
-		stv0900_write_bits(intp, DISEQC_RESET, 0);
-		break;
-	case SEC_TONE_OFF:
-		/*return diseqc mode to config->diseqc_mode.
-		Usually it's without _continues_ tone */
-		stv0900_write_bits(intp, DISTX_MODE,
-				state->config->diseqc_mode);
-		/*maintain the DiseqC reset to disable the 22KHz tone*/
-		stv0900_write_bits(intp, DISEQC_RESET, 1);
-		stv0900_write_bits(intp, DISEQC_RESET, 0);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static void stv0900_release(struct dvb_frontend *fe)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-
-	dprintk("%s\n", __func__);
-
-	if (state->config->set_lock_led)
-		state->config->set_lock_led(fe, 0);
-
-	if ((--(state->internal->dmds_used)) <= 0) {
-
-		dprintk("%s: Actually removing\n", __func__);
-
-		remove_inode(state->internal);
-		kfree(state->internal);
-	}
-
-	kfree(state);
-}
-
-static int stv0900_sleep(struct dvb_frontend *fe)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-
-	dprintk("%s\n", __func__);
-
-	if (state->config->set_lock_led)
-		state->config->set_lock_led(fe, 0);
-
-	return 0;
-}
-
-static int stv0900_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *intp = state->internal;
-	enum fe_stv0900_demod_num demod = state->demod;
-	struct stv0900_signal_info p_result = intp->result[demod];
-
-	p->frequency = p_result.locked ? p_result.frequency : 0;
-	p->symbol_rate = p_result.locked ? p_result.symbol_rate : 0;
-	return 0;
-}
-
-static struct dvb_frontend_ops stv0900_ops = {
-	.delsys = { SYS_DVBS, SYS_DVBS2, SYS_DSS },
-	.info = {
-		.name			= "STV0900 frontend",
-		.frequency_min		= 950000,
-		.frequency_max		= 2150000,
-		.frequency_stepsize	= 125,
-		.frequency_tolerance	= 0,
-		.symbol_rate_min	= 1000000,
-		.symbol_rate_max	= 45000000,
-		.symbol_rate_tolerance	= 500,
-		.caps			= FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
-					  FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 |
-					  FE_CAN_FEC_7_8 | FE_CAN_QPSK    |
-					  FE_CAN_2G_MODULATION |
-					  FE_CAN_FEC_AUTO
-	},
-	.release			= stv0900_release,
-	.init				= stv0900_init,
-	.get_frontend                   = stv0900_get_frontend,
-	.sleep				= stv0900_sleep,
-	.get_frontend_algo		= stv0900_frontend_algo,
-	.i2c_gate_ctrl			= stv0900_i2c_gate_ctrl,
-	.diseqc_send_master_cmd		= stv0900_send_master_cmd,
-	.diseqc_send_burst		= stv0900_send_burst,
-	.diseqc_recv_slave_reply	= stv0900_recv_slave_reply,
-	.set_tone			= stv0900_set_tone,
-	.search				= stv0900_search,
-	.read_status			= stv0900_read_status,
-	.read_ber			= stv0900_read_ber,
-	.read_signal_strength		= stv0900_read_signal_strength,
-	.read_snr			= stv0900_read_snr,
-	.read_ucblocks                  = stv0900_read_ucblocks,
-};
-
-struct dvb_frontend *stv0900_attach(const struct stv0900_config *config,
-					struct i2c_adapter *i2c,
-					int demod)
-{
-	struct stv0900_state *state = NULL;
-	struct stv0900_init_params init_params;
-	enum fe_stv0900_error err_stv0900;
-
-	state = kzalloc(sizeof(struct stv0900_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	state->demod		= demod;
-	state->config		= config;
-	state->i2c_adap		= i2c;
-
-	memcpy(&state->frontend.ops, &stv0900_ops,
-			sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-
-	switch (demod) {
-	case 0:
-	case 1:
-		init_params.dmd_ref_clk  	= config->xtal;
-		init_params.demod_mode		= config->demod_mode;
-		init_params.rolloff		= STV0900_35;
-		init_params.path1_ts_clock	= config->path1_mode;
-		init_params.tun1_maddress	= config->tun1_maddress;
-		init_params.tun1_iq_inv		= STV0900_IQ_NORMAL;
-		init_params.tuner1_adc		= config->tun1_adc;
-		init_params.tuner1_type		= config->tun1_type;
-		init_params.path2_ts_clock	= config->path2_mode;
-		init_params.ts_config		= config->ts_config_regs;
-		init_params.tun2_maddress	= config->tun2_maddress;
-		init_params.tuner2_adc		= config->tun2_adc;
-		init_params.tuner2_type		= config->tun2_type;
-		init_params.tun2_iq_inv		= STV0900_IQ_SWAPPED;
-
-		err_stv0900 = stv0900_init_internal(&state->frontend,
-							&init_params);
-
-		if (err_stv0900)
-			goto error;
-
-		break;
-	default:
-		goto error;
-		break;
-	}
-
-	dprintk("%s: Attaching STV0900 demodulator(%d) \n", __func__, demod);
-	return &state->frontend;
-
-error:
-	dprintk("%s: Failed to attach STV0900 demodulator(%d) \n",
-		__func__, demod);
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(stv0900_attach);
-
-MODULE_PARM_DESC(debug, "Set debug");
-
-MODULE_AUTHOR("Igor M. Liplianin");
-MODULE_DESCRIPTION("ST STV0900 frontend");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/stv0900_init.h b/drivers/media/dvb/frontends/stv0900_init.h
deleted file mode 100644
index b684df9..0000000
--- a/drivers/media/dvb/frontends/stv0900_init.h
+++ /dev/null
@@ -1,584 +0,0 @@
-/*
- * stv0900_init.h
- *
- * Driver for ST STV0900 satellite demodulator IC.
- *
- * Copyright (C) ST Microelectronics.
- * Copyright (C) 2009 NetUP Inc.
- * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef STV0900_INIT_H
-#define STV0900_INIT_H
-
-#include "stv0900_priv.h"
-
-/* DVBS2 C/N Look-Up table */
-static const struct stv0900_table stv0900_s2_cn = {
-	55,
-	{
-		{ -30,	13348 }, /*C/N=-3dB*/
-		{ -20,	12640 }, /*C/N=-2dB*/
-		{ -10,	11883 }, /*C/N=-1dB*/
-		{ 0,	11101 }, /*C/N=-0dB*/
-		{ 5,	10718 }, /*C/N=0.5dB*/
-		{ 10,	10339 }, /*C/N=1.0dB*/
-		{ 15,	9947 }, /*C/N=1.5dB*/
-		{ 20,	9552 }, /*C/N=2.0dB*/
-		{ 25,	9183 }, /*C/N=2.5dB*/
-		{ 30,	8799 }, /*C/N=3.0dB*/
-		{ 35,	8422 }, /*C/N=3.5dB*/
-		{ 40,	8062 }, /*C/N=4.0dB*/
-		{ 45,	7707 }, /*C/N=4.5dB*/
-		{ 50,	7353 }, /*C/N=5.0dB*/
-		{ 55,	7025 }, /*C/N=5.5dB*/
-		{ 60,	6684 }, /*C/N=6.0dB*/
-		{ 65,	6331 }, /*C/N=6.5dB*/
-		{ 70,	6036 }, /*C/N=7.0dB*/
-		{ 75,	5727 }, /*C/N=7.5dB*/
-		{ 80,	5437 }, /*C/N=8.0dB*/
-		{ 85,	5164 }, /*C/N=8.5dB*/
-		{ 90,	4902 }, /*C/N=9.0dB*/
-		{ 95,	4653 }, /*C/N=9.5dB*/
-		{ 100,	4408 }, /*C/N=10.0dB*/
-		{ 105,	4187 }, /*C/N=10.5dB*/
-		{ 110,	3961 }, /*C/N=11.0dB*/
-		{ 115,	3751 }, /*C/N=11.5dB*/
-		{ 120,	3558 }, /*C/N=12.0dB*/
-		{ 125,	3368 }, /*C/N=12.5dB*/
-		{ 130,	3191 }, /*C/N=13.0dB*/
-		{ 135,	3017 }, /*C/N=13.5dB*/
-		{ 140,	2862 }, /*C/N=14.0dB*/
-		{ 145,	2710 }, /*C/N=14.5dB*/
-		{ 150,	2565 }, /*C/N=15.0dB*/
-		{ 160,	2300 }, /*C/N=16.0dB*/
-		{ 170,	2058 }, /*C/N=17.0dB*/
-		{ 180,	1849 }, /*C/N=18.0dB*/
-		{ 190,	1663 }, /*C/N=19.0dB*/
-		{ 200,	1495 }, /*C/N=20.0dB*/
-		{ 210,	1349 }, /*C/N=21.0dB*/
-		{ 220,	1222 }, /*C/N=22.0dB*/
-		{ 230,	1110 }, /*C/N=23.0dB*/
-		{ 240,	1011 }, /*C/N=24.0dB*/
-		{ 250,	925 }, /*C/N=25.0dB*/
-		{ 260,	853 }, /*C/N=26.0dB*/
-		{ 270,	789 }, /*C/N=27.0dB*/
-		{ 280,	734 }, /*C/N=28.0dB*/
-		{ 290,	690 }, /*C/N=29.0dB*/
-		{ 300,	650 }, /*C/N=30.0dB*/
-		{ 310,	619 }, /*C/N=31.0dB*/
-		{ 320,	593 }, /*C/N=32.0dB*/
-		{ 330,	571 }, /*C/N=33.0dB*/
-		{ 400,	498 }, /*C/N=40.0dB*/
-		{ 450,	484 }, /*C/N=45.0dB*/
-		{ 500,	481 }  /*C/N=50.0dB*/
-	}
-};
-
-/* RF level C/N Look-Up table */
-static const struct stv0900_table stv0900_rf = {
-	14,
-	{
-		{ -5, 0xCAA1 }, /*-5dBm*/
-		{ -10, 0xC229 }, /*-10dBm*/
-		{ -15, 0xBB08 }, /*-15dBm*/
-		{ -20, 0xB4BC }, /*-20dBm*/
-		{ -25, 0xAD5A }, /*-25dBm*/
-		{ -30, 0xA298 }, /*-30dBm*/
-		{ -35, 0x98A8 }, /*-35dBm*/
-		{ -40, 0x8389 }, /*-40dBm*/
-		{ -45, 0x59BE }, /*-45dBm*/
-		{ -50, 0x3A14 }, /*-50dBm*/
-		{ -55, 0x2D11 }, /*-55dBm*/
-		{ -60, 0x210D }, /*-60dBm*/
-		{ -65, 0xA14F }, /*-65dBm*/
-		{ -70, 0x7AA }	/*-70dBm*/
-	}
-};
-
-struct stv0900_car_loop_optim {
-	enum fe_stv0900_modcode modcode;
-	u8 car_loop_pilots_on_2;
-	u8 car_loop_pilots_off_2;
-	u8 car_loop_pilots_on_5;
-	u8 car_loop_pilots_off_5;
-	u8 car_loop_pilots_on_10;
-	u8 car_loop_pilots_off_10;
-	u8 car_loop_pilots_on_20;
-	u8 car_loop_pilots_off_20;
-	u8 car_loop_pilots_on_30;
-	u8 car_loop_pilots_off_30;
-
-};
-
-struct stv0900_short_frames_car_loop_optim {
-	enum fe_stv0900_modulation modulation;
-	u8 car_loop_cut12_2;    /* Cut 1.2,   SR<=3msps     */
-	u8 car_loop_cut20_2;    /* Cut 2.0,   SR<3msps      */
-	u8 car_loop_cut12_5;    /* Cut 1.2,   3<SR<=7msps   */
-	u8 car_loop_cut20_5;    /* Cut 2.0,   3<SR<=7msps   */
-	u8 car_loop_cut12_10;   /* Cut 1.2,   7<SR<=15msps  */
-	u8 car_loop_cut20_10;   /* Cut 2.0,   7<SR<=15msps  */
-	u8 car_loop_cut12_20;   /* Cut 1.2,   10<SR<=25msps */
-	u8 car_loop_cut20_20;   /* Cut 2.0,   10<SR<=25msps */
-	u8 car_loop_cut12_30;   /* Cut 1.2,   25<SR<=45msps */
-	u8 car_loop_cut20_30;   /* Cut 2.0,   10<SR<=45msps */
-
-};
-
-struct stv0900_short_frames_car_loop_optim_vs_mod {
-	enum fe_stv0900_modulation modulation;
-	u8 car_loop_2;	  /* SR<3msps      */
-	u8 car_loop_5;	  /* 3<SR<=7msps   */
-	u8 car_loop_10;   /* 7<SR<=15msps  */
-	u8 car_loop_20;   /* 10<SR<=25msps */
-	u8 car_loop_30;   /* 10<SR<=45msps */
-};
-
-/* Cut 1.x Tracking carrier loop carrier QPSK 1/2 to 8PSK 9/10 long Frame */
-static const struct stv0900_car_loop_optim FE_STV0900_S2CarLoop[14] = {
-	/*Modcod		2MPon 	2MPoff	5MPon 	5MPoff	10MPon
-				10MPoff	20MPon 	20MPoff	30MPon 	30MPoff */
-	{ STV0900_QPSK_12,	0x1C,	0x0D,	0x1B,	0x2C,	0x3A,
-				0x1C,	0x2A,	0x3B,	0x2A,	0x1B },
-	{ STV0900_QPSK_35,	0x2C,	0x0D,	0x2B,	0x2C,	0x3A,
-				0x0C,	0x3A,	0x2B,	0x2A,	0x0B },
-	{ STV0900_QPSK_23,	0x2C,	0x0D,	0x2B,	0x2C,	0x0B,
-				0x0C,	0x3A,	0x1B,	0x2A,	0x3A },
-	{ STV0900_QPSK_34,	0x3C,	0x0D,	0x3B,	0x1C,	0x0B,
-				0x3B,	0x3A,	0x0B,	0x2A,	0x3A },
-	{ STV0900_QPSK_45,	0x3C,	0x0D,	0x3B,	0x1C,	0x0B,
-				0x3B,	0x3A,	0x0B,	0x2A,	0x3A },
-	{ STV0900_QPSK_56,	0x0D,	0x0D,	0x3B,	0x1C,	0x0B,
-				0x3B,	0x3A,	0x0B,	0x2A,	0x3A },
-	{ STV0900_QPSK_89,	0x0D,	0x0D,	0x3B,	0x1C,	0x1B,
-				0x3B,	0x3A,	0x0B,	0x2A,	0x3A },
-	{ STV0900_QPSK_910,	0x1D,	0x0D,	0x3B,	0x1C,	0x1B,
-				0x3B,	0x3A,	0x0B,	0x2A,	0x3A },
-	{ STV0900_8PSK_35,	0x29,	0x3B,	0x09,	0x2B,	0x38,
-				0x0B,	0x18,	0x1A,	0x08,	0x0A },
-	{ STV0900_8PSK_23,	0x0A,	0x3B,	0x29,	0x2B,	0x19,
-				0x0B,	0x38,	0x1A,	0x18,	0x0A },
-	{ STV0900_8PSK_34,	0x3A,	0x3B,	0x2A,	0x2B,	0x39,
-				0x0B,	0x19,	0x1A,	0x38,	0x0A },
-	{ STV0900_8PSK_56,	0x1B,	0x3B,	0x0B,	0x2B,	0x1A,
-				0x0B,	0x39,	0x1A,	0x19,	0x0A },
-	{ STV0900_8PSK_89,	0x3B,	0x3B,	0x0B,	0x2B,	0x2A,
-				0x0B,	0x39,	0x1A,	0x29,	0x39 },
-	{ STV0900_8PSK_910,	0x3B,	0x3B, 	0x0B,	0x2B, 	0x2A,
-				0x0B,	0x39,	0x1A,	0x29,	0x39 }
-};
-
-
-/* Cut 2.0 Tracking carrier loop carrier QPSK 1/2 to 8PSK 9/10 long Frame */
-static const struct stv0900_car_loop_optim FE_STV0900_S2CarLoopCut20[14] = {
-	/* Modcod		2MPon 	2MPoff	5MPon 	5MPoff	10MPon
-				10MPoff	20MPon 	20MPoff	30MPon 	30MPoff */
-	{ STV0900_QPSK_12,	0x1F,	0x3F,	0x1E,	0x3F,	0x3D,
-				0x1F,	0x3D,	0x3E,	0x3D,	0x1E },
-	{ STV0900_QPSK_35,	0x2F,	0x3F,	0x2E,	0x2F,	0x3D,
-				0x0F,	0x0E,	0x2E,	0x3D,	0x0E },
-	{ STV0900_QPSK_23,	0x2F,	0x3F,	0x2E,	0x2F,	0x0E,
-				0x0F,	0x0E,	0x1E,	0x3D,	0x3D },
-	{ STV0900_QPSK_34,	0x3F,	0x3F,	0x3E,	0x1F,	0x0E,
-				0x3E,	0x0E,	0x1E,	0x3D,	0x3D },
-	{ STV0900_QPSK_45,	0x3F,	0x3F,	0x3E,	0x1F,	0x0E,
-				0x3E,	0x0E,	0x1E,	0x3D,	0x3D },
-	{ STV0900_QPSK_56,	0x3F,	0x3F,	0x3E,	0x1F,	0x0E,
-				0x3E,	0x0E,	0x1E,	0x3D,	0x3D },
-	{ STV0900_QPSK_89,	0x3F,	0x3F,	0x3E,	0x1F,	0x1E,
-				0x3E,	0x0E,	0x1E,	0x3D,	0x3D },
-	{ STV0900_QPSK_910,	0x3F,	0x3F,	0x3E,	0x1F,	0x1E,
-				0x3E,	0x0E,	0x1E,	0x3D,	0x3D },
-	{ STV0900_8PSK_35,	0x3c,	0x0c,	0x1c,	0x3b,	0x0c,
-				0x3b,	0x2b,	0x2b,	0x1b,	0x2b },
-	{ STV0900_8PSK_23,	0x1d,	0x0c,	0x3c,	0x0c,	0x2c,
-				0x3b,	0x0c,	0x2b,	0x2b,	0x2b },
-	{ STV0900_8PSK_34,	0x0e,	0x1c,	0x3d,	0x0c,	0x0d,
-				0x3b,	0x2c,	0x3b,	0x0c,	0x2b },
-	{ STV0900_8PSK_56,	0x2e,	0x3e,	0x1e,	0x2e,	0x2d,
-				0x1e,	0x3c,	0x2d,	0x2c,	0x1d },
-	{ STV0900_8PSK_89,	0x3e,	0x3e,	0x1e,	0x2e,	0x3d,
-				0x1e,	0x0d,	0x2d,	0x3c,	0x1d },
-	{ STV0900_8PSK_910,	0x3e,	0x3e, 	0x1e,	0x2e, 	0x3d,
-				0x1e,	0x1d,	0x2d,	0x0d,	0x1d },
-};
-
-
-
-/* Cut 2.0 Tracking carrier loop carrier 16APSK 2/3 to 32APSK 9/10 long Frame */
-static const struct stv0900_car_loop_optim FE_STV0900_S2APSKCarLoopCut20[11] = {
-	/* Modcod		2MPon 	2MPoff	5MPon 	5MPoff	10MPon
-				10MPoff	20MPon 	20MPoff	30MPon 	30MPoff */
-	{ STV0900_16APSK_23,	0x0C,	0x0C,	0x0C,	0x0C,	0x1D,
-				0x0C,	0x3C,	0x0C,	0x2C,	0x0C },
-	{ STV0900_16APSK_34,	0x0C,	0x0C,	0x0C,	0x0C,	0x0E,
-				0x0C,	0x2D,	0x0C,	0x1D,	0x0C },
-	{ STV0900_16APSK_45,	0x0C,	0x0C,	0x0C,	0x0C,	0x1E,
-				0x0C,	0x3D,	0x0C,	0x2D,	0x0C },
-	{ STV0900_16APSK_56,	0x0C,	0x0C,	0x0C,	0x0C,	0x1E,
-				0x0C,	0x3D,	0x0C,	0x2D,	0x0C },
-	{ STV0900_16APSK_89,	0x0C,	0x0C,	0x0C,	0x0C,	0x2E,
-				0x0C,	0x0E,	0x0C,	0x3D,	0x0C },
-	{ STV0900_16APSK_910,	0x0C,	0x0C,	0x0C,	0x0C,	0x2E,
-				0x0C,	0x0E,	0x0C,	0x3D,	0x0C },
-	{ STV0900_32APSK_34,	0x0C,	0x0C,	0x0C,	0x0C,	0x0C,
-				0x0C,	0x0C,	0x0C,	0x0C,	0x0C },
-	{ STV0900_32APSK_45,	0x0C,	0x0C,	0x0C,	0x0C,	0x0C,
-				0x0C,	0x0C,	0x0C,	0x0C,	0x0C },
-	{ STV0900_32APSK_56,	0x0C,	0x0C,	0x0C,	0x0C,	0x0C,
-				0x0C,	0x0C,	0x0C,	0x0C,	0x0C },
-	{ STV0900_32APSK_89,	0x0C,	0x0C,	0x0C,	0x0C,	0x0C,
-				0x0C,	0x0C,	0x0C,	0x0C,	0x0C },
-	{ STV0900_32APSK_910,	0x0C,	0x0C,	0x0C,	0x0C,	0x0C,
-				0x0C,	0x0C,	0x0C,	0x0C,	0x0C },
-};
-
-
-/* Cut 2.0 Tracking carrier loop carrier QPSK 1/4 to QPSK 2/5 long Frame */
-static const struct stv0900_car_loop_optim FE_STV0900_S2LowQPCarLoopCut20[3] = {
-	/* Modcod		2MPon 	2MPoff	5MPon 	5MPoff	10MPon
-				10MPoff	20MPon 	20MPoff	30MPon 	30MPoff */
-	{ STV0900_QPSK_14,	0x0F,	0x3F,	0x0E,	0x3F,	0x2D,
-				0x2F,	0x2D,	0x1F,	0x3D,	0x3E },
-	{ STV0900_QPSK_13,	0x0F,	0x3F,	0x0E,	0x3F,	0x2D,
-				0x2F,	0x3D,	0x0F,	0x3D,	0x2E },
-	{ STV0900_QPSK_25,	0x1F,	0x3F,	0x1E,	0x3F,	0x3D,
-				0x1F,	0x3D,	0x3E,	0x3D,	0x2E }
-};
-
-
-/* Cut 2.0 Tracking carrier loop carrier  short Frame, cut 1.2 and 2.0 */
-static const
-struct stv0900_short_frames_car_loop_optim FE_STV0900_S2ShortCarLoop[4] = {
-	/*Mod		2Mcut1.2 2Mcut2.0 5Mcut1.2 5Mcut2.0 10Mcut1.2
-			10Mcut2.0 20Mcut1.2 20M_cut2.0 30Mcut1.2 30Mcut2.0*/
-	{ STV0900_QPSK,		0x3C,	0x2F,	0x2B,	0x2E,	0x0B,
-				0x0E,	0x3A,	0x0E,	0x2A,	0x3D },
-	{ STV0900_8PSK,		0x0B,	0x3E,	0x2A,	0x0E,	0x0A,
-				0x2D,	0x19,	0x0D,	0x09,	0x3C },
-	{ STV0900_16APSK,	0x1B,	0x1E,	0x1B,	0x1E,	0x1B,
-				0x1E,	0x3A,	0x3D,	0x2A,	0x2D },
-	{ STV0900_32APSK,	0x1B,	0x1E,	0x1B,	0x1E,	0x1B,
-				0x1E,	0x3A,	0x3D,	0x2A,	0x2D }
-};
-
-static	const struct stv0900_car_loop_optim FE_STV0900_S2CarLoopCut30[14] = {
-	/*Modcod		2MPon 	2MPoff	5MPon 	5MPoff	10MPon
-				10MPoff	20MPon 	20MPoff	30MPon 	30MPoff	*/
-	{ STV0900_QPSK_12,	0x3C,	0x2C,	0x0C,	0x2C,	0x1B,
-				0x2C,	0x1B,	0x1C,	0x0B, 	0x3B },
-	{ STV0900_QPSK_35,	0x0D,	0x0D,	0x0C,	0x0D,	0x1B,
-				0x3C,	0x1B,	0x1C,	0x0B,	0x3B },
-	{ STV0900_QPSK_23,	0x1D,	0x0D,	0x0C,	0x1D,	0x2B,
-				0x3C,	0x1B,	0x1C,	0x0B,	0x3B },
-	{ STV0900_QPSK_34,	0x1D,	0x1D,	0x0C,	0x1D,	0x2B,
-				0x3C,	0x1B,	0x1C,	0x0B,	0x3B },
-	{ STV0900_QPSK_45,	0x2D,	0x1D,	0x1C,	0x1D,	0x2B,
-				0x3C,	0x2B,	0x0C,	0x1B,	0x3B },
-	{ STV0900_QPSK_56,	0x2D,	0x1D,	0x1C,	0x1D,	0x2B,
-				0x3C,	0x2B,	0x0C,	0x1B,	0x3B },
-	{ STV0900_QPSK_89,	0x3D,	0x2D,	0x1C,	0x1D,	0x3B,
-				0x3C,	0x2B,	0x0C,	0x1B,	0x3B },
-	{ STV0900_QPSK_910,	0x3D,	0x2D,	0x1C,	0x1D,	0x3B,
-				0x3C,	0x2B,	0x0C,	0x1B,	0x3B },
-	{ STV0900_8PSK_35,	0x39,	0x19,	0x39,	0x19,	0x19,
-				0x19,	0x19,	0x19,	0x09,	0x19 },
-	{ STV0900_8PSK_23,	0x2A,	0x39,	0x1A,	0x0A,	0x39,
-				0x0A,	0x29,	0x39,	0x29,	0x0A },
-	{ STV0900_8PSK_34,	0x0B,	0x3A,	0x0B,	0x0B,	0x3A,
-				0x1B,	0x1A,	0x0B,	0x1A,	0x3A },
-	{ STV0900_8PSK_56,	0x0C,	0x1B,	0x3B,	0x2B,	0x1B,
-				0x3B,	0x3A,	0x3B,	0x3A,	0x1B },
-	{ STV0900_8PSK_89,	0x2C,	0x2C,	0x2C,	0x1C,	0x2B,
-				0x0C,	0x0B,	0x3B,	0x0B,	0x1B },
-	{ STV0900_8PSK_910,	0x2C,	0x3C,	0x2C,	0x1C,	0x3B,
-				0x1C,	0x0B,	0x3B,	0x0B,	0x1B }
-};
-
-static	const
-struct stv0900_car_loop_optim FE_STV0900_S2APSKCarLoopCut30[11] = {
-	/*Modcod		2MPon 	2MPoff	5MPon 	5MPoff	10MPon
-				10MPoff	20MPon 	20MPoff	30MPon 	30MPoff	*/
-	{ STV0900_16APSK_23,	0x0A,	0x0A,	0x0A,	0x0A,	0x1A,
-				0x0A,	0x3A,	0x0A,	0x2A,	0x0A },
-	{ STV0900_16APSK_34,	0x0A,	0x0A,	0x0A,	0x0A,	0x0B,
-				0x0A,	0x3B,	0x0A,	0x1B,	0x0A },
-	{ STV0900_16APSK_45,	0x0A,	0x0A,	0x0A,	0x0A,	0x1B,
-				0x0A,	0x3B,	0x0A,	0x2B,	0x0A },
-	{ STV0900_16APSK_56,	0x0A,	0x0A,	0x0A,	0x0A,	0x1B,
-				0x0A,	0x3B,	0x0A,	0x2B,	0x0A },
-	{ STV0900_16APSK_89,	0x0A,	0x0A,	0x0A,	0x0A,	0x2B,
-				0x0A,	0x0C,	0x0A,	0x3B,	0x0A },
-	{ STV0900_16APSK_910,	0x0A,	0x0A,	0x0A,	0x0A,	0x2B,
-				0x0A,	0x0C,	0x0A,	0x3B,	0x0A },
-	{ STV0900_32APSK_34,	0x0A,	0x0A,	0x0A,	0x0A,	0x0A,
-				0x0A,	0x0A,	0x0A,	0x0A,	0x0A },
-	{ STV0900_32APSK_45,	0x0A,	0x0A,	0x0A,	0x0A,	0x0A,
-				0x0A,	0x0A,	0x0A,	0x0A,	0x0A },
-	{ STV0900_32APSK_56,	0x0A,	0x0A,	0x0A,	0x0A,	0x0A,
-				0x0A,	0x0A,	0x0A,	0x0A,	0x0A },
-	{ STV0900_32APSK_89,	0x0A,	0x0A,	0x0A,	0x0A,	0x0A,
-				0x0A,	0x0A,	0x0A,	0x0A,	0x0A },
-	{ STV0900_32APSK_910,	0x0A,	0x0A,	0x0A,	0x0A,	0x0A,
-				0x0A,	0x0A,	0x0A,	0x0A,	0x0A }
-};
-
-static	const
-struct stv0900_car_loop_optim FE_STV0900_S2LowQPCarLoopCut30[3] = {
-	/*Modcod		2MPon 	2MPoff	5MPon 	5MPoff	10MPon
-				10MPoff	20MPon 	20MPoff	30MPon 	30MPoff*/
-	{ STV0900_QPSK_14,	0x0C,	0x3C,	0x0B,	0x3C,	0x2A,
-				0x2C,	0x2A,	0x1C,	0x3A,	0x3B },
-	{ STV0900_QPSK_13,	0x0C,	0x3C,	0x0B,	0x3C,	0x2A,
-				0x2C,	0x3A,	0x0C,	0x3A,	0x2B },
-	{ STV0900_QPSK_25,	0x1C,	0x3C,	0x1B,	0x3C,	0x3A,
-				0x1C,	0x3A,	0x3B,	0x3A,	0x2B }
-};
-
-static	const struct stv0900_short_frames_car_loop_optim_vs_mod
-FE_STV0900_S2ShortCarLoopCut30[4] = {
-	/*Mod		2Mcut3.0 5Mcut3.0 10Mcut3.0 20Mcut3.0 30Mcut3.0*/
-	{ STV0900_QPSK,		0x2C,	0x2B,	0x0B,	0x0B,	0x3A },
-	{ STV0900_8PSK,		0x3B,	0x0B,	0x2A,	0x0A,	0x39 },
-	{ STV0900_16APSK,	0x1B,	0x1B,	0x1B,	0x3A,	0x2A },
-	{ STV0900_32APSK,	0x1B,	0x1B,	0x1B,	0x3A,	0x2A },
-
-};
-
-static const u16 STV0900_InitVal[181][2] = {
-	{ R0900_OUTCFG		, 0x00	},
-	{ R0900_AGCRF1CFG	, 0x11	},
-	{ R0900_AGCRF2CFG	, 0x13	},
-	{ R0900_TSGENERAL1X	, 0x14	},
-	{ R0900_TSTTNR2		, 0x21	},
-	{ R0900_TSTTNR4		, 0x21	},
-	{ R0900_P2_DISTXCTL	, 0x22	},
-	{ R0900_P2_F22TX	, 0xc0	},
-	{ R0900_P2_F22RX	, 0xc0	},
-	{ R0900_P2_DISRXCTL	, 0x00	},
-	{ R0900_P2_TNRSTEPS	, 0x87	},
-	{ R0900_P2_TNRGAIN	, 0x09	},
-	{ R0900_P2_DMDCFGMD	, 0xF9	},
-	{ R0900_P2_DEMOD	, 0x08	},
-	{ R0900_P2_DMDCFG3	, 0xc4	},
-	{ R0900_P2_CARFREQ	, 0xed	},
-	{ R0900_P2_TNRCFG2	, 0x02	},
-	{ R0900_P2_TNRCFG3	, 0x02	},
-	{ R0900_P2_LDT		, 0xd0	},
-	{ R0900_P2_LDT2		, 0xb8	},
-	{ R0900_P2_TMGCFG	, 0xd2	},
-	{ R0900_P2_TMGTHRISE	, 0x20	},
-	{ R0900_P2_TMGTHFALL	, 0x00	},
-	{ R0900_P2_FECSPY	, 0x88	},
-	{ R0900_P2_FSPYDATA	, 0x3a	},
-	{ R0900_P2_FBERCPT4	, 0x00	},
-	{ R0900_P2_FSPYBER	, 0x10	},
-	{ R0900_P2_ERRCTRL1	, 0x35	},
-	{ R0900_P2_ERRCTRL2	, 0xc1	},
-	{ R0900_P2_CFRICFG	, 0xf8	},
-	{ R0900_P2_NOSCFG	, 0x1c	},
-	{ R0900_P2_DMDT0M	, 0x20	},
-	{ R0900_P2_CORRELMANT	, 0x70	},
-	{ R0900_P2_CORRELABS	, 0x88	},
-	{ R0900_P2_AGC2O	, 0x5b	},
-	{ R0900_P2_AGC2REF	, 0x38	},
-	{ R0900_P2_CARCFG	, 0xe4	},
-	{ R0900_P2_ACLC		, 0x1A	},
-	{ R0900_P2_BCLC		, 0x09	},
-	{ R0900_P2_CARHDR	, 0x08	},
-	{ R0900_P2_KREFTMG	, 0xc1	},
-	{ R0900_P2_SFRUPRATIO	, 0xf0	},
-	{ R0900_P2_SFRLOWRATIO	, 0x70	},
-	{ R0900_P2_SFRSTEP	, 0x58	},
-	{ R0900_P2_TMGCFG2	, 0x01	},
-	{ R0900_P2_CAR2CFG	, 0x26	},
-	{ R0900_P2_BCLC2S2Q	, 0x86	},
-	{ R0900_P2_BCLC2S28	, 0x86	},
-	{ R0900_P2_SMAPCOEF7	, 0x77	},
-	{ R0900_P2_SMAPCOEF6	, 0x85	},
-	{ R0900_P2_SMAPCOEF5	, 0x77	},
-	{ R0900_P2_TSCFGL	, 0x20	},
-	{ R0900_P2_DMDCFG2	, 0x3b	},
-	{ R0900_P2_MODCODLST0	, 0xff	},
-	{ R0900_P2_MODCODLST1	, 0xff	},
-	{ R0900_P2_MODCODLST2	, 0xff	},
-	{ R0900_P2_MODCODLST3	, 0xff	},
-	{ R0900_P2_MODCODLST4	, 0xff	},
-	{ R0900_P2_MODCODLST5	, 0xff	},
-	{ R0900_P2_MODCODLST6	, 0xff	},
-	{ R0900_P2_MODCODLST7	, 0xcc	},
-	{ R0900_P2_MODCODLST8	, 0xcc	},
-	{ R0900_P2_MODCODLST9	, 0xcc	},
-	{ R0900_P2_MODCODLSTA	, 0xcc	},
-	{ R0900_P2_MODCODLSTB	, 0xcc	},
-	{ R0900_P2_MODCODLSTC	, 0xcc	},
-	{ R0900_P2_MODCODLSTD	, 0xcc	},
-	{ R0900_P2_MODCODLSTE	, 0xcc	},
-	{ R0900_P2_MODCODLSTF	, 0xcf	},
-	{ R0900_P1_DISTXCTL	, 0x22	},
-	{ R0900_P1_F22TX	, 0xc0	},
-	{ R0900_P1_F22RX	, 0xc0	},
-	{ R0900_P1_DISRXCTL	, 0x00	},
-	{ R0900_P1_TNRSTEPS	, 0x87	},
-	{ R0900_P1_TNRGAIN	, 0x09	},
-	{ R0900_P1_DMDCFGMD	, 0xf9	},
-	{ R0900_P1_DEMOD	, 0x08	},
-	{ R0900_P1_DMDCFG3	, 0xc4	},
-	{ R0900_P1_DMDT0M	, 0x20	},
-	{ R0900_P1_CARFREQ	, 0xed	},
-	{ R0900_P1_TNRCFG2	, 0x82	},
-	{ R0900_P1_TNRCFG3	, 0x02	},
-	{ R0900_P1_LDT		, 0xd0	},
-	{ R0900_P1_LDT2		, 0xb8	},
-	{ R0900_P1_TMGCFG	, 0xd2	},
-	{ R0900_P1_TMGTHRISE	, 0x20	},
-	{ R0900_P1_TMGTHFALL	, 0x00	},
-	{ R0900_P1_SFRUPRATIO	, 0xf0	},
-	{ R0900_P1_SFRLOWRATIO	, 0x70	},
-	{ R0900_P1_TSCFGL	, 0x20	},
-	{ R0900_P1_FECSPY	, 0x88	},
-	{ R0900_P1_FSPYDATA	, 0x3a	},
-	{ R0900_P1_FBERCPT4	, 0x00	},
-	{ R0900_P1_FSPYBER	, 0x10	},
-	{ R0900_P1_ERRCTRL1	, 0x35	},
-	{ R0900_P1_ERRCTRL2	, 0xc1	},
-	{ R0900_P1_CFRICFG	, 0xf8	},
-	{ R0900_P1_NOSCFG	, 0x1c	},
-	{ R0900_P1_CORRELMANT	, 0x70	},
-	{ R0900_P1_CORRELABS	, 0x88	},
-	{ R0900_P1_AGC2O	, 0x5b	},
-	{ R0900_P1_AGC2REF	, 0x38	},
-	{ R0900_P1_CARCFG	, 0xe4	},
-	{ R0900_P1_ACLC		, 0x1A	},
-	{ R0900_P1_BCLC		, 0x09	},
-	{ R0900_P1_CARHDR	, 0x08	},
-	{ R0900_P1_KREFTMG	, 0xc1	},
-	{ R0900_P1_SFRSTEP	, 0x58	},
-	{ R0900_P1_TMGCFG2	, 0x01	},
-	{ R0900_P1_CAR2CFG	, 0x26	},
-	{ R0900_P1_BCLC2S2Q	, 0x86	},
-	{ R0900_P1_BCLC2S28	, 0x86	},
-	{ R0900_P1_SMAPCOEF7	, 0x77	},
-	{ R0900_P1_SMAPCOEF6	, 0x85	},
-	{ R0900_P1_SMAPCOEF5	, 0x77	},
-	{ R0900_P1_DMDCFG2	, 0x3b	},
-	{ R0900_P1_MODCODLST0	, 0xff	},
-	{ R0900_P1_MODCODLST1	, 0xff	},
-	{ R0900_P1_MODCODLST2	, 0xff	},
-	{ R0900_P1_MODCODLST3	, 0xff	},
-	{ R0900_P1_MODCODLST4	, 0xff	},
-	{ R0900_P1_MODCODLST5	, 0xff	},
-	{ R0900_P1_MODCODLST6	, 0xff	},
-	{ R0900_P1_MODCODLST7	, 0xcc	},
-	{ R0900_P1_MODCODLST8	, 0xcc	},
-	{ R0900_P1_MODCODLST9	, 0xcc	},
-	{ R0900_P1_MODCODLSTA	, 0xcc	},
-	{ R0900_P1_MODCODLSTB	, 0xcc	},
-	{ R0900_P1_MODCODLSTC	, 0xcc	},
-	{ R0900_P1_MODCODLSTD	, 0xcc	},
-	{ R0900_P1_MODCODLSTE	, 0xcc	},
-	{ R0900_P1_MODCODLSTF	, 0xcf	},
-	{ R0900_GENCFG		, 0x1d	},
-	{ R0900_NBITER_NF4	, 0x37	},
-	{ R0900_NBITER_NF5	, 0x29	},
-	{ R0900_NBITER_NF6	, 0x37	},
-	{ R0900_NBITER_NF7	, 0x33	},
-	{ R0900_NBITER_NF8	, 0x31	},
-	{ R0900_NBITER_NF9	, 0x2f	},
-	{ R0900_NBITER_NF10	, 0x39	},
-	{ R0900_NBITER_NF11	, 0x3a	},
-	{ R0900_NBITER_NF12	, 0x29	},
-	{ R0900_NBITER_NF13	, 0x37	},
-	{ R0900_NBITER_NF14	, 0x33	},
-	{ R0900_NBITER_NF15	, 0x2f	},
-	{ R0900_NBITER_NF16	, 0x39	},
-	{ R0900_NBITER_NF17	, 0x3a	},
-	{ R0900_NBITERNOERR	, 0x04	},
-	{ R0900_GAINLLR_NF4	, 0x0C	},
-	{ R0900_GAINLLR_NF5	, 0x0F	},
-	{ R0900_GAINLLR_NF6	, 0x11	},
-	{ R0900_GAINLLR_NF7	, 0x14	},
-	{ R0900_GAINLLR_NF8	, 0x17	},
-	{ R0900_GAINLLR_NF9	, 0x19	},
-	{ R0900_GAINLLR_NF10	, 0x20	},
-	{ R0900_GAINLLR_NF11	, 0x21	},
-	{ R0900_GAINLLR_NF12	, 0x0D	},
-	{ R0900_GAINLLR_NF13	, 0x0F	},
-	{ R0900_GAINLLR_NF14	, 0x13	},
-	{ R0900_GAINLLR_NF15	, 0x1A	},
-	{ R0900_GAINLLR_NF16	, 0x1F	},
-	{ R0900_GAINLLR_NF17	, 0x21	},
-	{ R0900_RCCFG2		, 0x20	},
-	{ R0900_P1_FECM		, 0x01	}, /*disable DSS modes*/
-	{ R0900_P2_FECM		, 0x01	}, /*disable DSS modes*/
-	{ R0900_P1_PRVIT	, 0x2F	}, /*disable puncture rate 6/7*/
-	{ R0900_P2_PRVIT	, 0x2F	}, /*disable puncture rate 6/7*/
-	{ R0900_STROUT1CFG	, 0x4c	},
-	{ R0900_STROUT2CFG	, 0x4c	},
-	{ R0900_CLKOUT1CFG	, 0x50	},
-	{ R0900_CLKOUT2CFG	, 0x50	},
-	{ R0900_DPN1CFG		, 0x4a	},
-	{ R0900_DPN2CFG		, 0x4a	},
-	{ R0900_DATA71CFG	, 0x52	},
-	{ R0900_DATA72CFG	, 0x52	},
-	{ R0900_P1_TSCFGM	, 0xc0	},
-	{ R0900_P2_TSCFGM	, 0xc0	},
-	{ R0900_P1_TSCFGH	, 0xe0	}, /* DVB-CI timings */
-	{ R0900_P2_TSCFGH	, 0xe0	}, /* DVB-CI timings */
-	{ R0900_P1_TSSPEED	, 0x40	},
-	{ R0900_P2_TSSPEED	, 0x40	},
-};
-
-static const u16 STV0900_Cut20_AddOnVal[32][2] = {
-	{ R0900_P2_DMDCFG3	, 0xe8	},
-	{ R0900_P2_DMDCFG4	, 0x10	},
-	{ R0900_P2_CARFREQ	, 0x38	},
-	{ R0900_P2_CARHDR	, 0x20	},
-	{ R0900_P2_KREFTMG	, 0x5a	},
-	{ R0900_P2_SMAPCOEF7	, 0x06	},
-	{ R0900_P2_SMAPCOEF6	, 0x00	},
-	{ R0900_P2_SMAPCOEF5	, 0x04	},
-	{ R0900_P2_NOSCFG	, 0x0c	},
-	{ R0900_P1_DMDCFG3	, 0xe8	},
-	{ R0900_P1_DMDCFG4	, 0x10	},
-	{ R0900_P1_CARFREQ	, 0x38	},
-	{ R0900_P1_CARHDR	, 0x20	},
-	{ R0900_P1_KREFTMG	, 0x5a	},
-	{ R0900_P1_SMAPCOEF7	, 0x06	},
-	{ R0900_P1_SMAPCOEF6	, 0x00	},
-	{ R0900_P1_SMAPCOEF5	, 0x04	},
-	{ R0900_P1_NOSCFG	, 0x0c	},
-	{ R0900_GAINLLR_NF4	, 0x21	},
-	{ R0900_GAINLLR_NF5	, 0x21	},
-	{ R0900_GAINLLR_NF6	, 0x20	},
-	{ R0900_GAINLLR_NF7	, 0x1F	},
-	{ R0900_GAINLLR_NF8	, 0x1E	},
-	{ R0900_GAINLLR_NF9	, 0x1E	},
-	{ R0900_GAINLLR_NF10	, 0x1D	},
-	{ R0900_GAINLLR_NF11	, 0x1B	},
-	{ R0900_GAINLLR_NF12	, 0x20	},
-	{ R0900_GAINLLR_NF13	, 0x20	},
-	{ R0900_GAINLLR_NF14	, 0x20	},
-	{ R0900_GAINLLR_NF15	, 0x20	},
-	{ R0900_GAINLLR_NF16	, 0x20	},
-	{ R0900_GAINLLR_NF17	, 0x21	}
-
-};
-
-#endif
diff --git a/drivers/media/dvb/frontends/stv0900_priv.h b/drivers/media/dvb/frontends/stv0900_priv.h
deleted file mode 100644
index e0ea74c..0000000
--- a/drivers/media/dvb/frontends/stv0900_priv.h
+++ /dev/null
@@ -1,408 +0,0 @@
-/*
- * stv0900_priv.h
- *
- * Driver for ST STV0900 satellite demodulator IC.
- *
- * Copyright (C) ST Microelectronics.
- * Copyright (C) 2009 NetUP Inc.
- * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef STV0900_PRIV_H
-#define STV0900_PRIV_H
-
-#include <linux/i2c.h>
-
-#define ABS(X) ((X) < 0 ? (-1 * (X)) : (X))
-#define INRANGE(X, Y, Z) ((((X) <= (Y)) && ((Y) <= (Z))) \
-		|| (((Z) <= (Y)) && ((Y) <= (X))) ? 1 : 0)
-
-#ifndef MAKEWORD
-#define MAKEWORD(X, Y) (((X) << 8) + (Y))
-#endif
-
-#define LSB(X) (((X) & 0xFF))
-#define MSB(Y) (((Y) >> 8) & 0xFF)
-
-#ifndef TRUE
-#define TRUE (1 == 1)
-#endif
-#ifndef FALSE
-#define FALSE (!TRUE)
-#endif
-
-#define dprintk(args...) \
-	do { \
-		if (stvdebug) \
-			printk(KERN_DEBUG args); \
-	} while (0)
-
-#define STV0900_MAXLOOKUPSIZE 500
-#define STV0900_BLIND_SEARCH_AGC2_TH 700
-#define STV0900_BLIND_SEARCH_AGC2_TH_CUT30 1400
-#define IQPOWER_THRESHOLD  30
-
-/* One point of the lookup table */
-struct stv000_lookpoint {
-	s32 realval;/* real value */
-	s32 regval;/* binary value */
-};
-
-/* Lookup table definition */
-struct stv0900_table{
-	s32 size;/* Size of the lookup table */
-	struct stv000_lookpoint table[STV0900_MAXLOOKUPSIZE];/* Lookup table */
-};
-
-enum fe_stv0900_error {
-	STV0900_NO_ERROR = 0,
-	STV0900_INVALID_HANDLE,
-	STV0900_BAD_PARAMETER,
-	STV0900_I2C_ERROR,
-	STV0900_SEARCH_FAILED,
-};
-
-enum fe_stv0900_clock_type {
-	STV0900_USE_REGISTERS_DEFAULT,
-	STV0900_SERIAL_PUNCT_CLOCK,/*Serial punctured clock */
-	STV0900_SERIAL_CONT_CLOCK,/*Serial continues clock */
-	STV0900_PARALLEL_PUNCT_CLOCK,/*Parallel punctured clock */
-	STV0900_DVBCI_CLOCK/*Parallel continues clock : DVBCI */
-};
-
-enum fe_stv0900_search_state {
-	STV0900_SEARCH = 0,
-	STV0900_PLH_DETECTED,
-	STV0900_DVBS2_FOUND,
-	STV0900_DVBS_FOUND
-
-};
-
-enum fe_stv0900_ldpc_state {
-	STV0900_PATH1_OFF_PATH2_OFF = 0,
-	STV0900_PATH1_ON_PATH2_OFF = 1,
-	STV0900_PATH1_OFF_PATH2_ON = 2,
-	STV0900_PATH1_ON_PATH2_ON = 3
-};
-
-enum fe_stv0900_signal_type {
-	STV0900_NOAGC1 = 0,
-	STV0900_AGC1OK,
-	STV0900_NOTIMING,
-	STV0900_ANALOGCARRIER,
-	STV0900_TIMINGOK,
-	STV0900_NOAGC2,
-	STV0900_AGC2OK,
-	STV0900_NOCARRIER,
-	STV0900_CARRIEROK,
-	STV0900_NODATA,
-	STV0900_DATAOK,
-	STV0900_OUTOFRANGE,
-	STV0900_RANGEOK
-};
-
-enum fe_stv0900_demod_num {
-	STV0900_DEMOD_1,
-	STV0900_DEMOD_2
-};
-
-enum fe_stv0900_tracking_standard {
-	STV0900_DVBS1_STANDARD,/* Found Standard*/
-	STV0900_DVBS2_STANDARD,
-	STV0900_DSS_STANDARD,
-	STV0900_TURBOCODE_STANDARD,
-	STV0900_UNKNOWN_STANDARD
-};
-
-enum fe_stv0900_search_standard {
-	STV0900_AUTO_SEARCH,
-	STV0900_SEARCH_DVBS1,/* Search Standard*/
-	STV0900_SEARCH_DVBS2,
-	STV0900_SEARCH_DSS,
-	STV0900_SEARCH_TURBOCODE
-};
-
-enum fe_stv0900_search_algo {
-	STV0900_BLIND_SEARCH,/* offset freq and SR are Unknown */
-	STV0900_COLD_START,/* only the SR is known */
-	STV0900_WARM_START/* offset freq and SR are known */
-};
-
-enum fe_stv0900_modulation {
-	STV0900_QPSK,
-	STV0900_8PSK,
-	STV0900_16APSK,
-	STV0900_32APSK,
-	STV0900_UNKNOWN
-};
-
-enum fe_stv0900_modcode {
-	STV0900_DUMMY_PLF,
-	STV0900_QPSK_14,
-	STV0900_QPSK_13,
-	STV0900_QPSK_25,
-	STV0900_QPSK_12,
-	STV0900_QPSK_35,
-	STV0900_QPSK_23,
-	STV0900_QPSK_34,
-	STV0900_QPSK_45,
-	STV0900_QPSK_56,
-	STV0900_QPSK_89,
-	STV0900_QPSK_910,
-	STV0900_8PSK_35,
-	STV0900_8PSK_23,
-	STV0900_8PSK_34,
-	STV0900_8PSK_56,
-	STV0900_8PSK_89,
-	STV0900_8PSK_910,
-	STV0900_16APSK_23,
-	STV0900_16APSK_34,
-	STV0900_16APSK_45,
-	STV0900_16APSK_56,
-	STV0900_16APSK_89,
-	STV0900_16APSK_910,
-	STV0900_32APSK_34,
-	STV0900_32APSK_45,
-	STV0900_32APSK_56,
-	STV0900_32APSK_89,
-	STV0900_32APSK_910,
-	STV0900_MODCODE_UNKNOWN
-};
-
-enum fe_stv0900_fec {/*DVBS1, DSS and turbo code puncture rate*/
-	STV0900_FEC_1_2 = 0,
-	STV0900_FEC_2_3,
-	STV0900_FEC_3_4,
-	STV0900_FEC_4_5,/*for turbo code only*/
-	STV0900_FEC_5_6,
-	STV0900_FEC_6_7,/*for DSS only */
-	STV0900_FEC_7_8,
-	STV0900_FEC_8_9,/*for turbo code only*/
-	STV0900_FEC_UNKNOWN
-};
-
-enum fe_stv0900_frame_length {
-	STV0900_LONG_FRAME,
-	STV0900_SHORT_FRAME
-};
-
-enum fe_stv0900_pilot {
-	STV0900_PILOTS_OFF,
-	STV0900_PILOTS_ON
-};
-
-enum fe_stv0900_rolloff {
-	STV0900_35,
-	STV0900_25,
-	STV0900_20
-};
-
-enum fe_stv0900_search_iq {
-	STV0900_IQ_AUTO,
-	STV0900_IQ_AUTO_NORMAL_FIRST,
-	STV0900_IQ_FORCE_NORMAL,
-	STV0900_IQ_FORCE_SWAPPED
-};
-
-enum stv0900_iq_inversion {
-	STV0900_IQ_NORMAL,
-	STV0900_IQ_SWAPPED
-};
-
-enum fe_stv0900_diseqc_mode {
-	STV0900_22KHZ_Continues = 0,
-	STV0900_DISEQC_2_3_PWM = 2,
-	STV0900_DISEQC_3_3_PWM = 3,
-	STV0900_DISEQC_2_3_ENVELOP = 4,
-	STV0900_DISEQC_3_3_ENVELOP = 5
-};
-
-enum fe_stv0900_demod_mode {
-	STV0900_SINGLE = 0,
-	STV0900_DUAL
-};
-
-struct stv0900_init_params{
-	u32	dmd_ref_clk;/* Reference,Input clock for the demod in Hz */
-
-	/* Demodulator Type (single demod or dual demod) */
-	enum fe_stv0900_demod_mode	demod_mode;
-	enum fe_stv0900_rolloff		rolloff;
-	enum fe_stv0900_clock_type	path1_ts_clock;
-
-	u8	tun1_maddress;
-	int	tuner1_adc;
-	int 	tuner1_type;
-
-	/* IQ from the tuner1 to the demod */
-	enum stv0900_iq_inversion	tun1_iq_inv;
-	enum fe_stv0900_clock_type	path2_ts_clock;
-
-	u8	tun2_maddress;
-	int	tuner2_adc;
-	int	tuner2_type;
-
-	/* IQ from the tuner2 to the demod */
-	enum stv0900_iq_inversion	tun2_iq_inv;
-	struct stv0900_reg		*ts_config;
-};
-
-struct stv0900_search_params {
-	enum fe_stv0900_demod_num	path;/* Path Used demod1 or 2 */
-
-	u32	frequency;/* Transponder frequency (in KHz) */
-	u32	symbol_rate;/* Transponder symbol rate  (in bds)*/
-	u32	search_range;/* Range of the search (in Hz) */
-
-	enum fe_stv0900_search_standard	standard;
-	enum fe_stv0900_modulation	modulation;
-	enum fe_stv0900_fec		fec;
-	enum fe_stv0900_modcode		modcode;
-	enum fe_stv0900_search_iq	iq_inversion;
-	enum fe_stv0900_search_algo	search_algo;
-
-};
-
-struct stv0900_signal_info {
-	int	locked;/* Transponder locked */
-	u32	frequency;/* Transponder frequency (in KHz) */
-	u32	symbol_rate;/* Transponder symbol rate  (in Mbds) */
-
-	enum fe_stv0900_tracking_standard	standard;
-	enum fe_stv0900_fec			fec;
-	enum fe_stv0900_modcode			modcode;
-	enum fe_stv0900_modulation		modulation;
-	enum fe_stv0900_pilot			pilot;
-	enum fe_stv0900_frame_length		frame_len;
-	enum stv0900_iq_inversion		spectrum;
-	enum fe_stv0900_rolloff			rolloff;
-
-	s32 Power;/* Power of the RF signal (dBm) */
-	s32 C_N;/* Carrier to noise ratio (dB x10)*/
-	u32 BER;/* Bit error rate (x10^7) */
-
-};
-
-struct stv0900_internal{
-	s32	quartz;
-	s32	mclk;
-	/* manual RollOff for DVBS1/DSS only */
-	enum fe_stv0900_rolloff		rolloff;
-	/* Demodulator use for single demod or for dual demod) */
-	enum fe_stv0900_demod_mode	demod_mode;
-
-	/*Demods */
-	s32	freq[2];
-	s32	bw[2];
-	s32	symbol_rate[2];
-	s32	srch_range[2];
-	/* for software/auto tuner */
-	int	tuner_type[2];
-
-	/* algorithm for search Blind, Cold or Warm*/
-	enum fe_stv0900_search_algo	srch_algo[2];
-	/* search standard: Auto, DVBS1/DSS only or DVBS2 only*/
-	enum fe_stv0900_search_standard	srch_standard[2];
-	/* inversion search : auto, auto norma first, normal or inverted */
-	enum fe_stv0900_search_iq	srch_iq_inv[2];
-	enum fe_stv0900_modcode		modcode[2];
-	enum fe_stv0900_modulation	modulation[2];
-	enum fe_stv0900_fec		fec[2];
-
-	struct stv0900_signal_info	result[2];
-	enum fe_stv0900_error		err[2];
-
-
-	struct i2c_adapter	*i2c_adap;
-	u8			i2c_addr;
-	u8			clkmode;/* 0 for CLKI, 2 for XTALI */
-	u8			chip_id;
-	struct stv0900_reg	*ts_config;
-	enum fe_stv0900_error	errs;
-	int dmds_used;
-};
-
-/* state for each demod */
-struct stv0900_state {
-	/* pointer for internal params, one for each pair of demods */
-	struct stv0900_internal		*internal;
-	struct i2c_adapter		*i2c_adap;
-	const struct stv0900_config	*config;
-	struct dvb_frontend		frontend;
-	int demod;
-};
-
-extern int stvdebug;
-
-extern s32 ge2comp(s32 a, s32 width);
-
-extern void stv0900_write_reg(struct stv0900_internal *i_params,
-				u16 reg_addr, u8 reg_data);
-
-extern u8 stv0900_read_reg(struct stv0900_internal *i_params,
-				u16 reg_addr);
-
-extern void stv0900_write_bits(struct stv0900_internal *i_params,
-				u32 label, u8 val);
-
-extern u8 stv0900_get_bits(struct stv0900_internal *i_params,
-				u32 label);
-
-extern int stv0900_get_demod_lock(struct stv0900_internal *i_params,
-				enum fe_stv0900_demod_num demod, s32 time_out);
-extern int stv0900_check_signal_presence(struct stv0900_internal *i_params,
-				enum fe_stv0900_demod_num demod);
-
-extern enum fe_stv0900_signal_type stv0900_algo(struct dvb_frontend *fe);
-
-extern void stv0900_set_tuner(struct dvb_frontend *fe, u32 frequency,
-				u32 bandwidth);
-extern void stv0900_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth);
-
-extern void stv0900_start_search(struct stv0900_internal *i_params,
-				enum fe_stv0900_demod_num demod);
-
-extern u8 stv0900_get_optim_carr_loop(s32 srate,
-				enum fe_stv0900_modcode modcode,
-				s32 pilot, u8 chip_id);
-
-extern u8 stv0900_get_optim_short_carr_loop(s32 srate,
-				enum fe_stv0900_modulation modulation,
-				u8 chip_id);
-
-extern void stv0900_stop_all_s2_modcod(struct stv0900_internal *i_params,
-				enum fe_stv0900_demod_num demod);
-
-extern void stv0900_activate_s2_modcod(struct stv0900_internal *i_params,
-				enum fe_stv0900_demod_num demod);
-
-extern void stv0900_activate_s2_modcod_single(struct stv0900_internal *i_params,
-				enum fe_stv0900_demod_num demod);
-
-extern enum
-fe_stv0900_tracking_standard stv0900_get_standard(struct dvb_frontend *fe,
-				enum fe_stv0900_demod_num demod);
-
-extern u32
-stv0900_get_freq_auto(struct stv0900_internal *intp, int demod);
-
-extern void
-stv0900_set_tuner_auto(struct stv0900_internal *intp, u32 Frequency,
-						u32 Bandwidth, int demod);
-
-#endif
diff --git a/drivers/media/dvb/frontends/stv0900_reg.h b/drivers/media/dvb/frontends/stv0900_reg.h
deleted file mode 100644
index 731afe9..0000000
--- a/drivers/media/dvb/frontends/stv0900_reg.h
+++ /dev/null
@@ -1,3981 +0,0 @@
-/*
- * stv0900_reg.h
- *
- * Driver for ST STV0900 satellite demodulator IC.
- *
- * Copyright (C) ST Microelectronics.
- * Copyright (C) 2009 NetUP Inc.
- * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef STV0900_REG_H
-#define STV0900_REG_H
-
-extern s32 shiftx(s32 x, int demod, s32 shift);
-
-#define REGx(x) shiftx(x, demod, 0x200)
-#define FLDx(x) shiftx(x, demod, 0x2000000)
-
-/*MID*/
-#define R0900_MID 0xf100
-#define F0900_MCHIP_IDENT 0xf10000f0
-#define F0900_MRELEASE 0xf100000f
-
-/*DACR1*/
-#define R0900_DACR1 0xf113
-#define F0900_DAC_MODE 0xf11300e0
-#define F0900_DAC_VALUE1 0xf113000f
-
-/*DACR2*/
-#define R0900_DACR2 0xf114
-#define F0900_DAC_VALUE0 0xf11400ff
-
-/*OUTCFG*/
-#define R0900_OUTCFG 0xf11c
-#define F0900_OUTSERRS1_HZ 0xf11c0040
-#define F0900_OUTSERRS2_HZ 0xf11c0020
-#define F0900_OUTSERRS3_HZ 0xf11c0010
-#define F0900_OUTPARRS3_HZ 0xf11c0008
-
-/*IRQSTATUS3*/
-#define R0900_IRQSTATUS3 0xf120
-#define F0900_SPLL_LOCK 0xf1200020
-#define F0900_SSTREAM_LCK_3 0xf1200010
-#define F0900_SSTREAM_LCK_2 0xf1200008
-#define F0900_SSTREAM_LCK_1 0xf1200004
-#define F0900_SDVBS1_PRF_2 0xf1200002
-#define F0900_SDVBS1_PRF_1 0xf1200001
-
-/*IRQSTATUS2*/
-#define R0900_IRQSTATUS2 0xf121
-#define F0900_SSPY_ENDSIM_3 0xf1210080
-#define F0900_SSPY_ENDSIM_2 0xf1210040
-#define F0900_SSPY_ENDSIM_1 0xf1210020
-#define F0900_SPKTDEL_ERROR_2 0xf1210010
-#define F0900_SPKTDEL_LOCKB_2 0xf1210008
-#define F0900_SPKTDEL_LOCK_2 0xf1210004
-#define F0900_SPKTDEL_ERROR_1 0xf1210002
-#define F0900_SPKTDEL_LOCKB_1 0xf1210001
-
-/*IRQSTATUS1*/
-#define R0900_IRQSTATUS1 0xf122
-#define F0900_SPKTDEL_LOCK_1 0xf1220080
-#define F0900_SDEMOD_LOCKB_2 0xf1220004
-#define F0900_SDEMOD_LOCK_2 0xf1220002
-#define F0900_SDEMOD_IRQ_2 0xf1220001
-
-/*IRQSTATUS0*/
-#define R0900_IRQSTATUS0 0xf123
-#define F0900_SDEMOD_LOCKB_1 0xf1230080
-#define F0900_SDEMOD_LOCK_1 0xf1230040
-#define F0900_SDEMOD_IRQ_1 0xf1230020
-#define F0900_SBCH_ERRFLAG 0xf1230010
-#define F0900_SDISEQC2RX_IRQ 0xf1230008
-#define F0900_SDISEQC2TX_IRQ 0xf1230004
-#define F0900_SDISEQC1RX_IRQ 0xf1230002
-#define F0900_SDISEQC1TX_IRQ 0xf1230001
-
-/*IRQMASK3*/
-#define R0900_IRQMASK3 0xf124
-#define F0900_MPLL_LOCK 0xf1240020
-#define F0900_MSTREAM_LCK_3 0xf1240010
-#define F0900_MSTREAM_LCK_2 0xf1240008
-#define F0900_MSTREAM_LCK_1 0xf1240004
-#define F0900_MDVBS1_PRF_2 0xf1240002
-#define F0900_MDVBS1_PRF_1 0xf1240001
-
-/*IRQMASK2*/
-#define R0900_IRQMASK2 0xf125
-#define F0900_MSPY_ENDSIM_3 0xf1250080
-#define F0900_MSPY_ENDSIM_2 0xf1250040
-#define F0900_MSPY_ENDSIM_1 0xf1250020
-#define F0900_MPKTDEL_ERROR_2 0xf1250010
-#define F0900_MPKTDEL_LOCKB_2 0xf1250008
-#define F0900_MPKTDEL_LOCK_2 0xf1250004
-#define F0900_MPKTDEL_ERROR_1 0xf1250002
-#define F0900_MPKTDEL_LOCKB_1 0xf1250001
-
-/*IRQMASK1*/
-#define R0900_IRQMASK1 0xf126
-#define F0900_MPKTDEL_LOCK_1 0xf1260080
-#define F0900_MEXTPINB2 0xf1260040
-#define F0900_MEXTPIN2 0xf1260020
-#define F0900_MEXTPINB1 0xf1260010
-#define F0900_MEXTPIN1 0xf1260008
-#define F0900_MDEMOD_LOCKB_2 0xf1260004
-#define F0900_MDEMOD_LOCK_2 0xf1260002
-#define F0900_MDEMOD_IRQ_2 0xf1260001
-
-/*IRQMASK0*/
-#define R0900_IRQMASK0 0xf127
-#define F0900_MDEMOD_LOCKB_1 0xf1270080
-#define F0900_MDEMOD_LOCK_1 0xf1270040
-#define F0900_MDEMOD_IRQ_1 0xf1270020
-#define F0900_MBCH_ERRFLAG 0xf1270010
-#define F0900_MDISEQC2RX_IRQ 0xf1270008
-#define F0900_MDISEQC2TX_IRQ 0xf1270004
-#define F0900_MDISEQC1RX_IRQ 0xf1270002
-#define F0900_MDISEQC1TX_IRQ 0xf1270001
-
-/*I2CCFG*/
-#define R0900_I2CCFG 0xf129
-#define F0900_I2C_FASTMODE 0xf1290008
-#define F0900_I2CADDR_INC 0xf1290003
-
-/*P1_I2CRPT*/
-#define R0900_P1_I2CRPT 0xf12a
-#define I2CRPT shiftx(R0900_P1_I2CRPT, demod, -1)
-#define F0900_P1_I2CT_ON 0xf12a0080
-#define I2CT_ON shiftx(F0900_P1_I2CT_ON, demod, -0x10000)
-#define F0900_P1_ENARPT_LEVEL 0xf12a0070
-#define F0900_P1_SCLT_DELAY 0xf12a0008
-#define F0900_P1_STOP_ENABLE 0xf12a0004
-#define F0900_P1_STOP_SDAT2SDA 0xf12a0002
-
-/*P2_I2CRPT*/
-#define R0900_P2_I2CRPT 0xf12b
-#define F0900_P2_I2CT_ON 0xf12b0080
-#define F0900_P2_ENARPT_LEVEL 0xf12b0070
-#define F0900_P2_SCLT_DELAY 0xf12b0008
-#define F0900_P2_STOP_ENABLE 0xf12b0004
-#define F0900_P2_STOP_SDAT2SDA 0xf12b0002
-
-/*IOPVALUE6*/
-#define R0900_IOPVALUE6 0xf138
-#define F0900_VSCL 0xf1380004
-#define F0900_VSDA 0xf1380002
-#define F0900_VDATA3_0 0xf1380001
-
-/*IOPVALUE5*/
-#define R0900_IOPVALUE5 0xf139
-#define F0900_VDATA3_1 0xf1390080
-#define F0900_VDATA3_2 0xf1390040
-#define F0900_VDATA3_3 0xf1390020
-#define F0900_VDATA3_4 0xf1390010
-#define F0900_VDATA3_5 0xf1390008
-#define F0900_VDATA3_6 0xf1390004
-#define F0900_VDATA3_7 0xf1390002
-#define F0900_VCLKOUT3 0xf1390001
-
-/*IOPVALUE4*/
-#define R0900_IOPVALUE4 0xf13a
-#define F0900_VSTROUT3 0xf13a0080
-#define F0900_VDPN3 0xf13a0040
-#define F0900_VERROR3 0xf13a0020
-#define F0900_VDATA2_7 0xf13a0010
-#define F0900_VCLKOUT2 0xf13a0008
-#define F0900_VSTROUT2 0xf13a0004
-#define F0900_VDPN2 0xf13a0002
-#define F0900_VERROR2 0xf13a0001
-
-/*IOPVALUE3*/
-#define R0900_IOPVALUE3 0xf13b
-#define F0900_VDATA1_7 0xf13b0080
-#define F0900_VCLKOUT1 0xf13b0040
-#define F0900_VSTROUT1 0xf13b0020
-#define F0900_VDPN1 0xf13b0010
-#define F0900_VERROR1 0xf13b0008
-#define F0900_VCLKOUT27 0xf13b0004
-#define F0900_VDISEQCOUT2 0xf13b0002
-#define F0900_VSCLT2 0xf13b0001
-
-/*IOPVALUE2*/
-#define R0900_IOPVALUE2 0xf13c
-#define F0900_VSDAT2 0xf13c0080
-#define F0900_VAGCRF2 0xf13c0040
-#define F0900_VDISEQCOUT1 0xf13c0020
-#define F0900_VSCLT1 0xf13c0010
-#define F0900_VSDAT1 0xf13c0008
-#define F0900_VAGCRF1 0xf13c0004
-#define F0900_VDIRCLK 0xf13c0002
-#define F0900_VSTDBY 0xf13c0001
-
-/*IOPVALUE1*/
-#define R0900_IOPVALUE1 0xf13d
-#define F0900_VCS1 0xf13d0080
-#define F0900_VCS0 0xf13d0040
-#define F0900_VGPIO13 0xf13d0020
-#define F0900_VGPIO12 0xf13d0010
-#define F0900_VGPIO11 0xf13d0008
-#define F0900_VGPIO10 0xf13d0004
-#define F0900_VGPIO9 0xf13d0002
-#define F0900_VGPIO8 0xf13d0001
-
-/*IOPVALUE0*/
-#define R0900_IOPVALUE0 0xf13e
-#define F0900_VGPIO7 0xf13e0080
-#define F0900_VGPIO6 0xf13e0040
-#define F0900_VGPIO5 0xf13e0020
-#define F0900_VGPIO4 0xf13e0010
-#define F0900_VGPIO3 0xf13e0008
-#define F0900_VGPIO2 0xf13e0004
-#define F0900_VGPIO1 0xf13e0002
-#define F0900_VCLKI2 0xf13e0001
-
-/*CLKI2CFG*/
-#define R0900_CLKI2CFG 0xf140
-#define F0900_CLKI2_OPD 0xf1400080
-#define F0900_CLKI2_CONFIG 0xf140007e
-#define F0900_CLKI2_XOR 0xf1400001
-
-/*GPIO1CFG*/
-#define R0900_GPIO1CFG 0xf141
-#define F0900_GPIO1_OPD 0xf1410080
-#define F0900_GPIO1_CONFIG 0xf141007e
-#define F0900_GPIO1_XOR 0xf1410001
-
-/*GPIO2CFG*/
-#define R0900_GPIO2CFG 0xf142
-#define F0900_GPIO2_OPD 0xf1420080
-#define F0900_GPIO2_CONFIG 0xf142007e
-#define F0900_GPIO2_XOR 0xf1420001
-
-/*GPIO3CFG*/
-#define R0900_GPIO3CFG 0xf143
-#define F0900_GPIO3_OPD 0xf1430080
-#define F0900_GPIO3_CONFIG 0xf143007e
-#define F0900_GPIO3_XOR 0xf1430001
-
-/*GPIO4CFG*/
-#define R0900_GPIO4CFG 0xf144
-#define F0900_GPIO4_OPD 0xf1440080
-#define F0900_GPIO4_CONFIG 0xf144007e
-#define F0900_GPIO4_XOR 0xf1440001
-
-/*GPIO5CFG*/
-#define R0900_GPIO5CFG 0xf145
-#define F0900_GPIO5_OPD 0xf1450080
-#define F0900_GPIO5_CONFIG 0xf145007e
-#define F0900_GPIO5_XOR 0xf1450001
-
-/*GPIO6CFG*/
-#define R0900_GPIO6CFG 0xf146
-#define F0900_GPIO6_OPD 0xf1460080
-#define F0900_GPIO6_CONFIG 0xf146007e
-#define F0900_GPIO6_XOR 0xf1460001
-
-/*GPIO7CFG*/
-#define R0900_GPIO7CFG 0xf147
-#define F0900_GPIO7_OPD 0xf1470080
-#define F0900_GPIO7_CONFIG 0xf147007e
-#define F0900_GPIO7_XOR 0xf1470001
-
-/*GPIO8CFG*/
-#define R0900_GPIO8CFG 0xf148
-#define F0900_GPIO8_OPD 0xf1480080
-#define F0900_GPIO8_CONFIG 0xf148007e
-#define F0900_GPIO8_XOR 0xf1480001
-
-/*GPIO9CFG*/
-#define R0900_GPIO9CFG 0xf149
-#define F0900_GPIO9_OPD 0xf1490080
-#define F0900_GPIO9_CONFIG 0xf149007e
-#define F0900_GPIO9_XOR 0xf1490001
-
-/*GPIO10CFG*/
-#define R0900_GPIO10CFG 0xf14a
-#define F0900_GPIO10_OPD 0xf14a0080
-#define F0900_GPIO10_CONFIG 0xf14a007e
-#define F0900_GPIO10_XOR 0xf14a0001
-
-/*GPIO11CFG*/
-#define R0900_GPIO11CFG 0xf14b
-#define F0900_GPIO11_OPD 0xf14b0080
-#define F0900_GPIO11_CONFIG 0xf14b007e
-#define F0900_GPIO11_XOR 0xf14b0001
-
-/*GPIO12CFG*/
-#define R0900_GPIO12CFG 0xf14c
-#define F0900_GPIO12_OPD 0xf14c0080
-#define F0900_GPIO12_CONFIG 0xf14c007e
-#define F0900_GPIO12_XOR 0xf14c0001
-
-/*GPIO13CFG*/
-#define R0900_GPIO13CFG 0xf14d
-#define F0900_GPIO13_OPD 0xf14d0080
-#define F0900_GPIO13_CONFIG 0xf14d007e
-#define F0900_GPIO13_XOR 0xf14d0001
-
-/*CS0CFG*/
-#define R0900_CS0CFG 0xf14e
-#define F0900_CS0_OPD 0xf14e0080
-#define F0900_CS0_CONFIG 0xf14e007e
-#define F0900_CS0_XOR 0xf14e0001
-
-/*CS1CFG*/
-#define R0900_CS1CFG 0xf14f
-#define F0900_CS1_OPD 0xf14f0080
-#define F0900_CS1_CONFIG 0xf14f007e
-#define F0900_CS1_XOR 0xf14f0001
-
-/*STDBYCFG*/
-#define R0900_STDBYCFG 0xf150
-#define F0900_STDBY_OPD 0xf1500080
-#define F0900_STDBY_CONFIG 0xf150007e
-#define F0900_STBDY_XOR 0xf1500001
-
-/*DIRCLKCFG*/
-#define R0900_DIRCLKCFG 0xf151
-#define F0900_DIRCLK_OPD 0xf1510080
-#define F0900_DIRCLK_CONFIG 0xf151007e
-#define F0900_DIRCLK_XOR 0xf1510001
-
-/*AGCRF1CFG*/
-#define R0900_AGCRF1CFG 0xf152
-#define F0900_AGCRF1_OPD 0xf1520080
-#define F0900_AGCRF1_CONFIG 0xf152007e
-#define F0900_AGCRF1_XOR 0xf1520001
-
-/*SDAT1CFG*/
-#define R0900_SDAT1CFG 0xf153
-#define F0900_SDAT1_OPD 0xf1530080
-#define F0900_SDAT1_CONFIG 0xf153007e
-#define F0900_SDAT1_XOR 0xf1530001
-
-/*SCLT1CFG*/
-#define R0900_SCLT1CFG 0xf154
-#define F0900_SCLT1_OPD 0xf1540080
-#define F0900_SCLT1_CONFIG 0xf154007e
-#define F0900_SCLT1_XOR 0xf1540001
-
-/*DISEQCO1CFG*/
-#define R0900_DISEQCO1CFG 0xf155
-#define F0900_DISEQCO1_OPD 0xf1550080
-#define F0900_DISEQCO1_CONFIG 0xf155007e
-#define F0900_DISEQC1_XOR 0xf1550001
-
-/*AGCRF2CFG*/
-#define R0900_AGCRF2CFG 0xf156
-#define F0900_AGCRF2_OPD 0xf1560080
-#define F0900_AGCRF2_CONFIG 0xf156007e
-#define F0900_AGCRF2_XOR 0xf1560001
-
-/*SDAT2CFG*/
-#define R0900_SDAT2CFG 0xf157
-#define F0900_SDAT2_OPD 0xf1570080
-#define F0900_SDAT2_CONFIG 0xf157007e
-#define F0900_SDAT2_XOR 0xf1570001
-
-/*SCLT2CFG*/
-#define R0900_SCLT2CFG 0xf158
-#define F0900_SCLT2_OPD 0xf1580080
-#define F0900_SCLT2_CONFIG 0xf158007e
-#define F0900_SCLT2_XOR 0xf1580001
-
-/*DISEQCO2CFG*/
-#define R0900_DISEQCO2CFG 0xf159
-#define F0900_DISEQCO2_OPD 0xf1590080
-#define F0900_DISEQCO2_CONFIG 0xf159007e
-#define F0900_DISEQC2_XOR 0xf1590001
-
-/*CLKOUT27CFG*/
-#define R0900_CLKOUT27CFG 0xf15a
-#define F0900_CLKOUT27_OPD 0xf15a0080
-#define F0900_CLKOUT27_CONFIG 0xf15a007e
-#define F0900_CLKOUT27_XOR 0xf15a0001
-
-/*ERROR1CFG*/
-#define R0900_ERROR1CFG 0xf15b
-#define F0900_ERROR1_OPD 0xf15b0080
-#define F0900_ERROR1_CONFIG 0xf15b007e
-#define F0900_ERROR1_XOR 0xf15b0001
-
-/*DPN1CFG*/
-#define R0900_DPN1CFG 0xf15c
-#define F0900_DPN1_OPD 0xf15c0080
-#define F0900_DPN1_CONFIG 0xf15c007e
-#define F0900_DPN1_XOR 0xf15c0001
-
-/*STROUT1CFG*/
-#define R0900_STROUT1CFG 0xf15d
-#define F0900_STROUT1_OPD 0xf15d0080
-#define F0900_STROUT1_CONFIG 0xf15d007e
-#define F0900_STROUT1_XOR 0xf15d0001
-
-/*CLKOUT1CFG*/
-#define R0900_CLKOUT1CFG 0xf15e
-#define F0900_CLKOUT1_OPD 0xf15e0080
-#define F0900_CLKOUT1_CONFIG 0xf15e007e
-#define F0900_CLKOUT1_XOR 0xf15e0001
-
-/*DATA71CFG*/
-#define R0900_DATA71CFG 0xf15f
-#define F0900_DATA71_OPD 0xf15f0080
-#define F0900_DATA71_CONFIG 0xf15f007e
-#define F0900_DATA71_XOR 0xf15f0001
-
-/*ERROR2CFG*/
-#define R0900_ERROR2CFG 0xf160
-#define F0900_ERROR2_OPD 0xf1600080
-#define F0900_ERROR2_CONFIG 0xf160007e
-#define F0900_ERROR2_XOR 0xf1600001
-
-/*DPN2CFG*/
-#define R0900_DPN2CFG 0xf161
-#define F0900_DPN2_OPD 0xf1610080
-#define F0900_DPN2_CONFIG 0xf161007e
-#define F0900_DPN2_XOR 0xf1610001
-
-/*STROUT2CFG*/
-#define R0900_STROUT2CFG 0xf162
-#define F0900_STROUT2_OPD 0xf1620080
-#define F0900_STROUT2_CONFIG 0xf162007e
-#define F0900_STROUT2_XOR 0xf1620001
-
-/*CLKOUT2CFG*/
-#define R0900_CLKOUT2CFG 0xf163
-#define F0900_CLKOUT2_OPD 0xf1630080
-#define F0900_CLKOUT2_CONFIG 0xf163007e
-#define F0900_CLKOUT2_XOR 0xf1630001
-
-/*DATA72CFG*/
-#define R0900_DATA72CFG 0xf164
-#define F0900_DATA72_OPD 0xf1640080
-#define F0900_DATA72_CONFIG 0xf164007e
-#define F0900_DATA72_XOR 0xf1640001
-
-/*ERROR3CFG*/
-#define R0900_ERROR3CFG 0xf165
-#define F0900_ERROR3_OPD 0xf1650080
-#define F0900_ERROR3_CONFIG 0xf165007e
-#define F0900_ERROR3_XOR 0xf1650001
-
-/*DPN3CFG*/
-#define R0900_DPN3CFG 0xf166
-#define F0900_DPN3_OPD 0xf1660080
-#define F0900_DPN3_CONFIG 0xf166007e
-#define F0900_DPN3_XOR 0xf1660001
-
-/*STROUT3CFG*/
-#define R0900_STROUT3CFG 0xf167
-#define F0900_STROUT3_OPD 0xf1670080
-#define F0900_STROUT3_CONFIG 0xf167007e
-#define F0900_STROUT3_XOR 0xf1670001
-
-/*CLKOUT3CFG*/
-#define R0900_CLKOUT3CFG 0xf168
-#define F0900_CLKOUT3_OPD 0xf1680080
-#define F0900_CLKOUT3_CONFIG 0xf168007e
-#define F0900_CLKOUT3_XOR 0xf1680001
-
-/*DATA73CFG*/
-#define R0900_DATA73CFG 0xf169
-#define F0900_DATA73_OPD 0xf1690080
-#define F0900_DATA73_CONFIG 0xf169007e
-#define F0900_DATA73_XOR 0xf1690001
-
-/*STRSTATUS1*/
-#define R0900_STRSTATUS1 0xf16a
-#define F0900_STRSTATUS_SEL2 0xf16a00f0
-#define F0900_STRSTATUS_SEL1 0xf16a000f
-
-/*STRSTATUS2*/
-#define R0900_STRSTATUS2 0xf16b
-#define F0900_STRSTATUS_SEL4 0xf16b00f0
-#define F0900_STRSTATUS_SEL3 0xf16b000f
-
-/*STRSTATUS3*/
-#define R0900_STRSTATUS3 0xf16c
-#define F0900_STRSTATUS_SEL6 0xf16c00f0
-#define F0900_STRSTATUS_SEL5 0xf16c000f
-
-/*FSKTFC2*/
-#define R0900_FSKTFC2 0xf170
-#define F0900_FSKT_KMOD 0xf17000fc
-#define F0900_FSKT_CAR2 0xf1700003
-
-/*FSKTFC1*/
-#define R0900_FSKTFC1 0xf171
-#define F0900_FSKT_CAR1 0xf17100ff
-
-/*FSKTFC0*/
-#define R0900_FSKTFC0 0xf172
-#define F0900_FSKT_CAR0 0xf17200ff
-
-/*FSKTDELTAF1*/
-#define R0900_FSKTDELTAF1 0xf173
-#define F0900_FSKT_DELTAF1 0xf173000f
-
-/*FSKTDELTAF0*/
-#define R0900_FSKTDELTAF0 0xf174
-#define F0900_FSKT_DELTAF0 0xf17400ff
-
-/*FSKTCTRL*/
-#define R0900_FSKTCTRL 0xf175
-#define F0900_FSKT_EN_SGN 0xf1750040
-#define F0900_FSKT_MOD_SGN 0xf1750020
-#define F0900_FSKT_MOD_EN 0xf175001c
-#define F0900_FSKT_DACMODE 0xf1750003
-
-/*FSKRFC2*/
-#define R0900_FSKRFC2 0xf176
-#define F0900_FSKR_DETSGN 0xf1760040
-#define F0900_FSKR_OUTSGN 0xf1760020
-#define F0900_FSKR_KAGC 0xf176001c
-#define F0900_FSKR_CAR2 0xf1760003
-
-/*FSKRFC1*/
-#define R0900_FSKRFC1 0xf177
-#define F0900_FSKR_CAR1 0xf17700ff
-
-/*FSKRFC0*/
-#define R0900_FSKRFC0 0xf178
-#define F0900_FSKR_CAR0 0xf17800ff
-
-/*FSKRK1*/
-#define R0900_FSKRK1 0xf179
-#define F0900_FSKR_K1_EXP 0xf17900e0
-#define F0900_FSKR_K1_MANT 0xf179001f
-
-/*FSKRK2*/
-#define R0900_FSKRK2 0xf17a
-#define F0900_FSKR_K2_EXP 0xf17a00e0
-#define F0900_FSKR_K2_MANT 0xf17a001f
-
-/*FSKRAGCR*/
-#define R0900_FSKRAGCR 0xf17b
-#define F0900_FSKR_OUTCTL 0xf17b00c0
-#define F0900_FSKR_AGC_REF 0xf17b003f
-
-/*FSKRAGC*/
-#define R0900_FSKRAGC 0xf17c
-#define F0900_FSKR_AGC_ACCU 0xf17c00ff
-
-/*FSKRALPHA*/
-#define R0900_FSKRALPHA 0xf17d
-#define F0900_FSKR_ALPHA_EXP 0xf17d001c
-#define F0900_FSKR_ALPHA_M 0xf17d0003
-
-/*FSKRPLTH1*/
-#define R0900_FSKRPLTH1 0xf17e
-#define F0900_FSKR_BETA 0xf17e00f0
-#define F0900_FSKR_PLL_TRESH1 0xf17e000f
-
-/*FSKRPLTH0*/
-#define R0900_FSKRPLTH0 0xf17f
-#define F0900_FSKR_PLL_TRESH0 0xf17f00ff
-
-/*FSKRDF1*/
-#define R0900_FSKRDF1 0xf180
-#define F0900_FSKR_OUT 0xf1800080
-#define F0900_FSKR_DELTAF1 0xf180001f
-
-/*FSKRDF0*/
-#define R0900_FSKRDF0 0xf181
-#define F0900_FSKR_DELTAF0 0xf18100ff
-
-/*FSKRSTEPP*/
-#define R0900_FSKRSTEPP 0xf182
-#define F0900_FSKR_STEP_PLUS 0xf18200ff
-
-/*FSKRSTEPM*/
-#define R0900_FSKRSTEPM 0xf183
-#define F0900_FSKR_STEP_MINUS 0xf18300ff
-
-/*FSKRDET1*/
-#define R0900_FSKRDET1 0xf184
-#define F0900_FSKR_DETECT 0xf1840080
-#define F0900_FSKR_CARDET_ACCU1 0xf184000f
-
-/*FSKRDET0*/
-#define R0900_FSKRDET0 0xf185
-#define F0900_FSKR_CARDET_ACCU0 0xf18500ff
-
-/*FSKRDTH1*/
-#define R0900_FSKRDTH1 0xf186
-#define F0900_FSKR_CARLOSS_THRESH1 0xf18600f0
-#define F0900_FSKR_CARDET_THRESH1 0xf186000f
-
-/*FSKRDTH0*/
-#define R0900_FSKRDTH0 0xf187
-#define F0900_FSKR_CARDET_THRESH0 0xf18700ff
-
-/*FSKRLOSS*/
-#define R0900_FSKRLOSS 0xf188
-#define F0900_FSKR_CARLOSS_THRESH0 0xf18800ff
-
-/*P2_DISTXCTL*/
-#define R0900_P2_DISTXCTL 0xf190
-#define F0900_P2_TIM_OFF 0xf1900080
-#define F0900_P2_DISEQC_RESET 0xf1900040
-#define F0900_P2_TIM_CMD 0xf1900030
-#define F0900_P2_DIS_PRECHARGE 0xf1900008
-#define F0900_P2_DISTX_MODE 0xf1900007
-
-/*P2_DISRXCTL*/
-#define R0900_P2_DISRXCTL 0xf191
-#define F0900_P2_RECEIVER_ON 0xf1910080
-#define F0900_P2_IGNO_SHORT22K 0xf1910040
-#define F0900_P2_ONECHIP_TRX 0xf1910020
-#define F0900_P2_EXT_ENVELOP 0xf1910010
-#define F0900_P2_PIN_SELECT0 0xf191000c
-#define F0900_P2_IRQ_RXEND 0xf1910002
-#define F0900_P2_IRQ_4NBYTES 0xf1910001
-
-/*P2_DISRX_ST0*/
-#define R0900_P2_DISRX_ST0 0xf194
-#define F0900_P2_RX_END 0xf1940080
-#define F0900_P2_RX_ACTIVE 0xf1940040
-#define F0900_P2_SHORT_22KHZ 0xf1940020
-#define F0900_P2_CONT_TONE 0xf1940010
-#define F0900_P2_FIFO_4BREADY 0xf1940008
-#define F0900_P2_FIFO_EMPTY 0xf1940004
-#define F0900_P2_ABORT_DISRX 0xf1940001
-
-/*P2_DISRX_ST1*/
-#define R0900_P2_DISRX_ST1 0xf195
-#define F0900_P2_RX_FAIL 0xf1950080
-#define F0900_P2_FIFO_PARITYFAIL 0xf1950040
-#define F0900_P2_RX_NONBYTE 0xf1950020
-#define F0900_P2_FIFO_OVERFLOW 0xf1950010
-#define F0900_P2_FIFO_BYTENBR 0xf195000f
-
-/*P2_DISRXDATA*/
-#define R0900_P2_DISRXDATA 0xf196
-#define F0900_P2_DISRX_DATA 0xf19600ff
-
-/*P2_DISTXDATA*/
-#define R0900_P2_DISTXDATA 0xf197
-#define F0900_P2_DISEQC_FIFO 0xf19700ff
-
-/*P2_DISTXSTATUS*/
-#define R0900_P2_DISTXSTATUS 0xf198
-#define F0900_P2_TX_FAIL 0xf1980080
-#define F0900_P2_FIFO_FULL 0xf1980040
-#define F0900_P2_TX_IDLE 0xf1980020
-#define F0900_P2_GAP_BURST 0xf1980010
-#define F0900_P2_TXFIFO_BYTES 0xf198000f
-
-/*P2_F22TX*/
-#define R0900_P2_F22TX 0xf199
-#define F0900_P2_F22_REG 0xf19900ff
-
-/*P2_F22RX*/
-#define R0900_P2_F22RX 0xf19a
-#define F0900_P2_F22RX_REG 0xf19a00ff
-
-/*P2_ACRPRESC*/
-#define R0900_P2_ACRPRESC 0xf19c
-#define F0900_P2_ACR_PRESC 0xf19c0007
-
-/*P2_ACRDIV*/
-#define R0900_P2_ACRDIV 0xf19d
-#define F0900_P2_ACR_DIV 0xf19d00ff
-
-/*P1_DISTXCTL*/
-#define R0900_P1_DISTXCTL 0xf1a0
-#define DISTXCTL shiftx(R0900_P1_DISTXCTL, demod, 0x10)
-#define F0900_P1_TIM_OFF 0xf1a00080
-#define F0900_P1_DISEQC_RESET 0xf1a00040
-#define DISEQC_RESET shiftx(F0900_P1_DISEQC_RESET, demod, 0x100000)
-#define F0900_P1_TIM_CMD 0xf1a00030
-#define F0900_P1_DIS_PRECHARGE 0xf1a00008
-#define DIS_PRECHARGE shiftx(F0900_P1_DIS_PRECHARGE, demod, 0x100000)
-#define F0900_P1_DISTX_MODE 0xf1a00007
-#define DISTX_MODE shiftx(F0900_P1_DISTX_MODE, demod, 0x100000)
-
-/*P1_DISRXCTL*/
-#define R0900_P1_DISRXCTL 0xf1a1
-#define DISRXCTL shiftx(R0900_P1_DISRXCTL, demod, 0x10)
-#define F0900_P1_RECEIVER_ON 0xf1a10080
-#define F0900_P1_IGNO_SHORT22K 0xf1a10040
-#define F0900_P1_ONECHIP_TRX 0xf1a10020
-#define F0900_P1_EXT_ENVELOP 0xf1a10010
-#define F0900_P1_PIN_SELECT0 0xf1a1000c
-#define F0900_P1_IRQ_RXEND 0xf1a10002
-#define F0900_P1_IRQ_4NBYTES 0xf1a10001
-
-/*P1_DISRX_ST0*/
-#define R0900_P1_DISRX_ST0 0xf1a4
-#define DISRX_ST0 shiftx(R0900_P1_DISRX_ST0, demod, 0x10)
-#define F0900_P1_RX_END 0xf1a40080
-#define RX_END shiftx(F0900_P1_RX_END, demod, 0x100000)
-#define F0900_P1_RX_ACTIVE 0xf1a40040
-#define F0900_P1_SHORT_22KHZ 0xf1a40020
-#define F0900_P1_CONT_TONE 0xf1a40010
-#define F0900_P1_FIFO_4BREADY 0xf1a40008
-#define F0900_P1_FIFO_EMPTY 0xf1a40004
-#define F0900_P1_ABORT_DISRX 0xf1a40001
-
-/*P1_DISRX_ST1*/
-#define R0900_P1_DISRX_ST1 0xf1a5
-#define DISRX_ST1 shiftx(R0900_P1_DISRX_ST1, demod, 0x10)
-#define F0900_P1_RX_FAIL 0xf1a50080
-#define F0900_P1_FIFO_PARITYFAIL 0xf1a50040
-#define F0900_P1_RX_NONBYTE 0xf1a50020
-#define F0900_P1_FIFO_OVERFLOW 0xf1a50010
-#define F0900_P1_FIFO_BYTENBR 0xf1a5000f
-#define FIFO_BYTENBR shiftx(F0900_P1_FIFO_BYTENBR, demod, 0x100000)
-
-/*P1_DISRXDATA*/
-#define R0900_P1_DISRXDATA 0xf1a6
-#define DISRXDATA shiftx(R0900_P1_DISRXDATA, demod, 0x10)
-#define F0900_P1_DISRX_DATA 0xf1a600ff
-
-/*P1_DISTXDATA*/
-#define R0900_P1_DISTXDATA 0xf1a7
-#define DISTXDATA shiftx(R0900_P1_DISTXDATA, demod, 0x10)
-#define F0900_P1_DISEQC_FIFO 0xf1a700ff
-
-/*P1_DISTXSTATUS*/
-#define R0900_P1_DISTXSTATUS 0xf1a8
-#define F0900_P1_TX_FAIL 0xf1a80080
-#define F0900_P1_FIFO_FULL 0xf1a80040
-#define FIFO_FULL shiftx(F0900_P1_FIFO_FULL, demod, 0x100000)
-#define F0900_P1_TX_IDLE 0xf1a80020
-#define TX_IDLE shiftx(F0900_P1_TX_IDLE, demod, 0x100000)
-#define F0900_P1_GAP_BURST 0xf1a80010
-#define F0900_P1_TXFIFO_BYTES 0xf1a8000f
-
-/*P1_F22TX*/
-#define R0900_P1_F22TX 0xf1a9
-#define F22TX shiftx(R0900_P1_F22TX, demod, 0x10)
-#define F0900_P1_F22_REG 0xf1a900ff
-
-/*P1_F22RX*/
-#define R0900_P1_F22RX 0xf1aa
-#define F22RX shiftx(R0900_P1_F22RX, demod, 0x10)
-#define F0900_P1_F22RX_REG 0xf1aa00ff
-
-/*P1_ACRPRESC*/
-#define R0900_P1_ACRPRESC 0xf1ac
-#define ACRPRESC shiftx(R0900_P1_ACRPRESC, demod, 0x10)
-#define F0900_P1_ACR_PRESC 0xf1ac0007
-
-/*P1_ACRDIV*/
-#define R0900_P1_ACRDIV 0xf1ad
-#define ACRDIV shiftx(R0900_P1_ACRDIV, demod, 0x10)
-#define F0900_P1_ACR_DIV 0xf1ad00ff
-
-/*NCOARSE*/
-#define R0900_NCOARSE 0xf1b3
-#define F0900_M_DIV 0xf1b300ff
-
-/*SYNTCTRL*/
-#define R0900_SYNTCTRL 0xf1b6
-#define F0900_STANDBY 0xf1b60080
-#define F0900_BYPASSPLLCORE 0xf1b60040
-#define F0900_SELX1RATIO 0xf1b60020
-#define F0900_STOP_PLL 0xf1b60008
-#define F0900_BYPASSPLLFSK 0xf1b60004
-#define F0900_SELOSCI 0xf1b60002
-#define F0900_BYPASSPLLADC 0xf1b60001
-
-/*FILTCTRL*/
-#define R0900_FILTCTRL 0xf1b7
-#define F0900_INV_CLK135 0xf1b70080
-#define F0900_SEL_FSKCKDIV 0xf1b70004
-#define F0900_INV_CLKFSK 0xf1b70002
-#define F0900_BYPASS_APPLI 0xf1b70001
-
-/*PLLSTAT*/
-#define R0900_PLLSTAT 0xf1b8
-#define F0900_PLLLOCK 0xf1b80001
-
-/*STOPCLK1*/
-#define R0900_STOPCLK1 0xf1c2
-#define F0900_STOP_CLKPKDT2 0xf1c20040
-#define F0900_STOP_CLKPKDT1 0xf1c20020
-#define F0900_STOP_CLKFEC 0xf1c20010
-#define F0900_STOP_CLKADCI2 0xf1c20008
-#define F0900_INV_CLKADCI2 0xf1c20004
-#define F0900_STOP_CLKADCI1 0xf1c20002
-#define F0900_INV_CLKADCI1 0xf1c20001
-
-/*STOPCLK2*/
-#define R0900_STOPCLK2 0xf1c3
-#define F0900_STOP_CLKSAMP2 0xf1c30010
-#define F0900_STOP_CLKSAMP1 0xf1c30008
-#define F0900_STOP_CLKVIT2 0xf1c30004
-#define F0900_STOP_CLKVIT1 0xf1c30002
-#define STOP_CLKVIT shiftx(F0900_STOP_CLKVIT1, demod, -2)
-#define F0900_STOP_CLKTS 0xf1c30001
-
-/*TSTTNR0*/
-#define R0900_TSTTNR0 0xf1df
-#define F0900_SEL_FSK 0xf1df0080
-#define F0900_FSK_PON 0xf1df0004
-
-/*TSTTNR1*/
-#define R0900_TSTTNR1 0xf1e0
-#define F0900_ADC1_PON 0xf1e00002
-#define F0900_ADC1_INMODE 0xf1e00001
-
-/*TSTTNR2*/
-#define R0900_TSTTNR2 0xf1e1
-#define F0900_DISEQC1_PON 0xf1e10020
-
-/*TSTTNR3*/
-#define R0900_TSTTNR3 0xf1e2
-#define F0900_ADC2_PON 0xf1e20002
-#define F0900_ADC2_INMODE 0xf1e20001
-
-/*TSTTNR4*/
-#define R0900_TSTTNR4 0xf1e3
-#define F0900_DISEQC2_PON 0xf1e30020
-
-/*P2_IQCONST*/
-#define R0900_P2_IQCONST 0xf200
-#define F0900_P2_CONSTEL_SELECT 0xf2000060
-#define F0900_P2_IQSYMB_SEL 0xf200001f
-
-/*P2_NOSCFG*/
-#define R0900_P2_NOSCFG 0xf201
-#define F0900_P2_DUMMYPL_NOSDATA 0xf2010020
-#define F0900_P2_NOSPLH_BETA 0xf2010018
-#define F0900_P2_NOSDATA_BETA 0xf2010007
-
-/*P2_ISYMB*/
-#define R0900_P2_ISYMB 0xf202
-#define F0900_P2_I_SYMBOL 0xf20201ff
-
-/*P2_QSYMB*/
-#define R0900_P2_QSYMB 0xf203
-#define F0900_P2_Q_SYMBOL 0xf20301ff
-
-/*P2_AGC1CFG*/
-#define R0900_P2_AGC1CFG 0xf204
-#define F0900_P2_DC_FROZEN 0xf2040080
-#define F0900_P2_DC_CORRECT 0xf2040040
-#define F0900_P2_AMM_FROZEN 0xf2040020
-#define F0900_P2_AMM_CORRECT 0xf2040010
-#define F0900_P2_QUAD_FROZEN 0xf2040008
-#define F0900_P2_QUAD_CORRECT 0xf2040004
-
-/*P2_AGC1CN*/
-#define R0900_P2_AGC1CN 0xf206
-#define F0900_P2_AGC1_LOCKED 0xf2060080
-#define F0900_P2_AGC1_MINPOWER 0xf2060010
-#define F0900_P2_AGCOUT_FAST 0xf2060008
-#define F0900_P2_AGCIQ_BETA 0xf2060007
-
-/*P2_AGC1REF*/
-#define R0900_P2_AGC1REF 0xf207
-#define F0900_P2_AGCIQ_REF 0xf20700ff
-
-/*P2_IDCCOMP*/
-#define R0900_P2_IDCCOMP 0xf208
-#define F0900_P2_IAVERAGE_ADJ 0xf20801ff
-
-/*P2_QDCCOMP*/
-#define R0900_P2_QDCCOMP 0xf209
-#define F0900_P2_QAVERAGE_ADJ 0xf20901ff
-
-/*P2_POWERI*/
-#define R0900_P2_POWERI 0xf20a
-#define F0900_P2_POWER_I 0xf20a00ff
-
-/*P2_POWERQ*/
-#define R0900_P2_POWERQ 0xf20b
-#define F0900_P2_POWER_Q 0xf20b00ff
-
-/*P2_AGC1AMM*/
-#define R0900_P2_AGC1AMM 0xf20c
-#define F0900_P2_AMM_VALUE 0xf20c00ff
-
-/*P2_AGC1QUAD*/
-#define R0900_P2_AGC1QUAD 0xf20d
-#define F0900_P2_QUAD_VALUE 0xf20d01ff
-
-/*P2_AGCIQIN1*/
-#define R0900_P2_AGCIQIN1 0xf20e
-#define F0900_P2_AGCIQ_VALUE1 0xf20e00ff
-
-/*P2_AGCIQIN0*/
-#define R0900_P2_AGCIQIN0 0xf20f
-#define F0900_P2_AGCIQ_VALUE0 0xf20f00ff
-
-/*P2_DEMOD*/
-#define R0900_P2_DEMOD 0xf210
-#define F0900_P2_MANUALS2_ROLLOFF 0xf2100080
-#define F0900_P2_SPECINV_CONTROL 0xf2100030
-#define F0900_P2_FORCE_ENASAMP 0xf2100008
-#define F0900_P2_MANUALSX_ROLLOFF 0xf2100004
-#define F0900_P2_ROLLOFF_CONTROL 0xf2100003
-
-/*P2_DMDMODCOD*/
-#define R0900_P2_DMDMODCOD 0xf211
-#define F0900_P2_MANUAL_MODCOD 0xf2110080
-#define F0900_P2_DEMOD_MODCOD 0xf211007c
-#define F0900_P2_DEMOD_TYPE 0xf2110003
-
-/*P2_DSTATUS*/
-#define R0900_P2_DSTATUS 0xf212
-#define F0900_P2_CAR_LOCK 0xf2120080
-#define F0900_P2_TMGLOCK_QUALITY 0xf2120060
-#define F0900_P2_LOCK_DEFINITIF 0xf2120008
-#define F0900_P2_OVADC_DETECT 0xf2120001
-
-/*P2_DSTATUS2*/
-#define R0900_P2_DSTATUS2 0xf213
-#define F0900_P2_DEMOD_DELOCK 0xf2130080
-#define F0900_P2_AGC1_NOSIGNALACK 0xf2130008
-#define F0900_P2_AGC2_OVERFLOW 0xf2130004
-#define F0900_P2_CFR_OVERFLOW 0xf2130002
-#define F0900_P2_GAMMA_OVERUNDER 0xf2130001
-
-/*P2_DMDCFGMD*/
-#define R0900_P2_DMDCFGMD 0xf214
-#define F0900_P2_DVBS2_ENABLE 0xf2140080
-#define F0900_P2_DVBS1_ENABLE 0xf2140040
-#define F0900_P2_SCAN_ENABLE 0xf2140010
-#define F0900_P2_CFR_AUTOSCAN 0xf2140008
-#define F0900_P2_TUN_RNG 0xf2140003
-
-/*P2_DMDCFG2*/
-#define R0900_P2_DMDCFG2 0xf215
-#define F0900_P2_S1S2_SEQUENTIAL 0xf2150040
-#define F0900_P2_INFINITE_RELOCK 0xf2150010
-
-/*P2_DMDISTATE*/
-#define R0900_P2_DMDISTATE 0xf216
-#define F0900_P2_I2C_DEMOD_MODE 0xf216001f
-
-/*P2_DMDT0M*/
-#define R0900_P2_DMDT0M 0xf217
-#define F0900_P2_DMDT0_MIN 0xf21700ff
-
-/*P2_DMDSTATE*/
-#define R0900_P2_DMDSTATE 0xf21b
-#define F0900_P2_HEADER_MODE 0xf21b0060
-
-/*P2_DMDFLYW*/
-#define R0900_P2_DMDFLYW 0xf21c
-#define F0900_P2_I2C_IRQVAL 0xf21c00f0
-#define F0900_P2_FLYWHEEL_CPT 0xf21c000f
-
-/*P2_DSTATUS3*/
-#define R0900_P2_DSTATUS3 0xf21d
-#define F0900_P2_DEMOD_CFGMODE 0xf21d0060
-
-/*P2_DMDCFG3*/
-#define R0900_P2_DMDCFG3 0xf21e
-#define F0900_P2_NOSTOP_FIFOFULL 0xf21e0008
-
-/*P2_DMDCFG4*/
-#define R0900_P2_DMDCFG4 0xf21f
-#define F0900_P2_TUNER_NRELAUNCH 0xf21f0008
-
-/*P2_CORRELMANT*/
-#define R0900_P2_CORRELMANT 0xf220
-#define F0900_P2_CORREL_MANT 0xf22000ff
-
-/*P2_CORRELABS*/
-#define R0900_P2_CORRELABS 0xf221
-#define F0900_P2_CORREL_ABS 0xf22100ff
-
-/*P2_CORRELEXP*/
-#define R0900_P2_CORRELEXP 0xf222
-#define F0900_P2_CORREL_ABSEXP 0xf22200f0
-#define F0900_P2_CORREL_EXP 0xf222000f
-
-/*P2_PLHMODCOD*/
-#define R0900_P2_PLHMODCOD 0xf224
-#define F0900_P2_SPECINV_DEMOD 0xf2240080
-#define F0900_P2_PLH_MODCOD 0xf224007c
-#define F0900_P2_PLH_TYPE 0xf2240003
-
-/*P2_DMDREG*/
-#define R0900_P2_DMDREG 0xf225
-#define F0900_P2_DECIM_PLFRAMES 0xf2250001
-
-/*P2_AGC2O*/
-#define R0900_P2_AGC2O 0xf22c
-#define F0900_P2_AGC2_COEF 0xf22c0007
-
-/*P2_AGC2REF*/
-#define R0900_P2_AGC2REF 0xf22d
-#define F0900_P2_AGC2_REF 0xf22d00ff
-
-/*P2_AGC1ADJ*/
-#define R0900_P2_AGC1ADJ 0xf22e
-#define F0900_P2_AGC1_ADJUSTED 0xf22e007f
-
-/*P2_AGC2I1*/
-#define R0900_P2_AGC2I1 0xf236
-#define F0900_P2_AGC2_INTEGRATOR1 0xf23600ff
-
-/*P2_AGC2I0*/
-#define R0900_P2_AGC2I0 0xf237
-#define F0900_P2_AGC2_INTEGRATOR0 0xf23700ff
-
-/*P2_CARCFG*/
-#define R0900_P2_CARCFG 0xf238
-#define F0900_P2_CFRUPLOW_AUTO 0xf2380080
-#define F0900_P2_CFRUPLOW_TEST 0xf2380040
-#define F0900_P2_ROTAON 0xf2380004
-#define F0900_P2_PH_DET_ALGO 0xf2380003
-
-/*P2_ACLC*/
-#define R0900_P2_ACLC 0xf239
-#define F0900_P2_CAR_ALPHA_MANT 0xf2390030
-#define F0900_P2_CAR_ALPHA_EXP 0xf239000f
-
-/*P2_BCLC*/
-#define R0900_P2_BCLC 0xf23a
-#define F0900_P2_CAR_BETA_MANT 0xf23a0030
-#define F0900_P2_CAR_BETA_EXP 0xf23a000f
-
-/*P2_CARFREQ*/
-#define R0900_P2_CARFREQ 0xf23d
-#define F0900_P2_KC_COARSE_EXP 0xf23d00f0
-#define F0900_P2_BETA_FREQ 0xf23d000f
-
-/*P2_CARHDR*/
-#define R0900_P2_CARHDR 0xf23e
-#define F0900_P2_K_FREQ_HDR 0xf23e00ff
-
-/*P2_LDT*/
-#define R0900_P2_LDT 0xf23f
-#define F0900_P2_CARLOCK_THRES 0xf23f01ff
-
-/*P2_LDT2*/
-#define R0900_P2_LDT2 0xf240
-#define F0900_P2_CARLOCK_THRES2 0xf24001ff
-
-/*P2_CFRICFG*/
-#define R0900_P2_CFRICFG 0xf241
-#define F0900_P2_NEG_CFRSTEP 0xf2410001
-
-/*P2_CFRUP1*/
-#define R0900_P2_CFRUP1 0xf242
-#define F0900_P2_CFR_UP1 0xf24201ff
-
-/*P2_CFRUP0*/
-#define R0900_P2_CFRUP0 0xf243
-#define F0900_P2_CFR_UP0 0xf24300ff
-
-/*P2_CFRLOW1*/
-#define R0900_P2_CFRLOW1 0xf246
-#define F0900_P2_CFR_LOW1 0xf24601ff
-
-/*P2_CFRLOW0*/
-#define R0900_P2_CFRLOW0 0xf247
-#define F0900_P2_CFR_LOW0 0xf24700ff
-
-/*P2_CFRINIT1*/
-#define R0900_P2_CFRINIT1 0xf248
-#define F0900_P2_CFR_INIT1 0xf24801ff
-
-/*P2_CFRINIT0*/
-#define R0900_P2_CFRINIT0 0xf249
-#define F0900_P2_CFR_INIT0 0xf24900ff
-
-/*P2_CFRINC1*/
-#define R0900_P2_CFRINC1 0xf24a
-#define F0900_P2_MANUAL_CFRINC 0xf24a0080
-#define F0900_P2_CFR_INC1 0xf24a003f
-
-/*P2_CFRINC0*/
-#define R0900_P2_CFRINC0 0xf24b
-#define F0900_P2_CFR_INC0 0xf24b00f8
-
-/*P2_CFR2*/
-#define R0900_P2_CFR2 0xf24c
-#define F0900_P2_CAR_FREQ2 0xf24c01ff
-
-/*P2_CFR1*/
-#define R0900_P2_CFR1 0xf24d
-#define F0900_P2_CAR_FREQ1 0xf24d00ff
-
-/*P2_CFR0*/
-#define R0900_P2_CFR0 0xf24e
-#define F0900_P2_CAR_FREQ0 0xf24e00ff
-
-/*P2_LDI*/
-#define R0900_P2_LDI 0xf24f
-#define F0900_P2_LOCK_DET_INTEGR 0xf24f01ff
-
-/*P2_TMGCFG*/
-#define R0900_P2_TMGCFG 0xf250
-#define F0900_P2_TMGLOCK_BETA 0xf25000c0
-#define F0900_P2_DO_TIMING_CORR 0xf2500010
-#define F0900_P2_TMG_MINFREQ 0xf2500003
-
-/*P2_RTC*/
-#define R0900_P2_RTC 0xf251
-#define F0900_P2_TMGALPHA_EXP 0xf25100f0
-#define F0900_P2_TMGBETA_EXP 0xf251000f
-
-/*P2_RTCS2*/
-#define R0900_P2_RTCS2 0xf252
-#define F0900_P2_TMGALPHAS2_EXP 0xf25200f0
-#define F0900_P2_TMGBETAS2_EXP 0xf252000f
-
-/*P2_TMGTHRISE*/
-#define R0900_P2_TMGTHRISE 0xf253
-#define F0900_P2_TMGLOCK_THRISE 0xf25300ff
-
-/*P2_TMGTHFALL*/
-#define R0900_P2_TMGTHFALL 0xf254
-#define F0900_P2_TMGLOCK_THFALL 0xf25400ff
-
-/*P2_SFRUPRATIO*/
-#define R0900_P2_SFRUPRATIO 0xf255
-#define F0900_P2_SFR_UPRATIO 0xf25500ff
-
-/*P2_SFRLOWRATIO*/
-#define R0900_P2_SFRLOWRATIO 0xf256
-#define F0900_P2_SFR_LOWRATIO 0xf25600ff
-
-/*P2_KREFTMG*/
-#define R0900_P2_KREFTMG 0xf258
-#define F0900_P2_KREF_TMG 0xf25800ff
-
-/*P2_SFRSTEP*/
-#define R0900_P2_SFRSTEP 0xf259
-#define F0900_P2_SFR_SCANSTEP 0xf25900f0
-#define F0900_P2_SFR_CENTERSTEP 0xf259000f
-
-/*P2_TMGCFG2*/
-#define R0900_P2_TMGCFG2 0xf25a
-#define F0900_P2_SFRRATIO_FINE 0xf25a0001
-
-/*P2_KREFTMG2*/
-#define R0900_P2_KREFTMG2 0xf25b
-#define F0900_P2_KREF_TMG2 0xf25b00ff
-
-/*P2_SFRINIT1*/
-#define R0900_P2_SFRINIT1 0xf25e
-#define F0900_P2_SFR_INIT1 0xf25e007f
-
-/*P2_SFRINIT0*/
-#define R0900_P2_SFRINIT0 0xf25f
-#define F0900_P2_SFR_INIT0 0xf25f00ff
-
-/*P2_SFRUP1*/
-#define R0900_P2_SFRUP1 0xf260
-#define F0900_P2_AUTO_GUP 0xf2600080
-#define F0900_P2_SYMB_FREQ_UP1 0xf260007f
-
-/*P2_SFRUP0*/
-#define R0900_P2_SFRUP0 0xf261
-#define F0900_P2_SYMB_FREQ_UP0 0xf26100ff
-
-/*P2_SFRLOW1*/
-#define R0900_P2_SFRLOW1 0xf262
-#define F0900_P2_AUTO_GLOW 0xf2620080
-#define F0900_P2_SYMB_FREQ_LOW1 0xf262007f
-
-/*P2_SFRLOW0*/
-#define R0900_P2_SFRLOW0 0xf263
-#define F0900_P2_SYMB_FREQ_LOW0 0xf26300ff
-
-/*P2_SFR3*/
-#define R0900_P2_SFR3 0xf264
-#define F0900_P2_SYMB_FREQ3 0xf26400ff
-
-/*P2_SFR2*/
-#define R0900_P2_SFR2 0xf265
-#define F0900_P2_SYMB_FREQ2 0xf26500ff
-
-/*P2_SFR1*/
-#define R0900_P2_SFR1 0xf266
-#define F0900_P2_SYMB_FREQ1 0xf26600ff
-
-/*P2_SFR0*/
-#define R0900_P2_SFR0 0xf267
-#define F0900_P2_SYMB_FREQ0 0xf26700ff
-
-/*P2_TMGREG2*/
-#define R0900_P2_TMGREG2 0xf268
-#define F0900_P2_TMGREG2 0xf26800ff
-
-/*P2_TMGREG1*/
-#define R0900_P2_TMGREG1 0xf269
-#define F0900_P2_TMGREG1 0xf26900ff
-
-/*P2_TMGREG0*/
-#define R0900_P2_TMGREG0 0xf26a
-#define F0900_P2_TMGREG0 0xf26a00ff
-
-/*P2_TMGLOCK1*/
-#define R0900_P2_TMGLOCK1 0xf26b
-#define F0900_P2_TMGLOCK_LEVEL1 0xf26b01ff
-
-/*P2_TMGLOCK0*/
-#define R0900_P2_TMGLOCK0 0xf26c
-#define F0900_P2_TMGLOCK_LEVEL0 0xf26c00ff
-
-/*P2_TMGOBS*/
-#define R0900_P2_TMGOBS 0xf26d
-#define F0900_P2_ROLLOFF_STATUS 0xf26d00c0
-
-/*P2_EQUALCFG*/
-#define R0900_P2_EQUALCFG 0xf26f
-#define F0900_P2_EQUAL_ON 0xf26f0040
-#define F0900_P2_MU_EQUALDFE 0xf26f0007
-
-/*P2_EQUAI1*/
-#define R0900_P2_EQUAI1 0xf270
-#define F0900_P2_EQUA_ACCI1 0xf27001ff
-
-/*P2_EQUAQ1*/
-#define R0900_P2_EQUAQ1 0xf271
-#define F0900_P2_EQUA_ACCQ1 0xf27101ff
-
-/*P2_EQUAI2*/
-#define R0900_P2_EQUAI2 0xf272
-#define F0900_P2_EQUA_ACCI2 0xf27201ff
-
-/*P2_EQUAQ2*/
-#define R0900_P2_EQUAQ2 0xf273
-#define F0900_P2_EQUA_ACCQ2 0xf27301ff
-
-/*P2_EQUAI3*/
-#define R0900_P2_EQUAI3 0xf274
-#define F0900_P2_EQUA_ACCI3 0xf27401ff
-
-/*P2_EQUAQ3*/
-#define R0900_P2_EQUAQ3 0xf275
-#define F0900_P2_EQUA_ACCQ3 0xf27501ff
-
-/*P2_EQUAI4*/
-#define R0900_P2_EQUAI4 0xf276
-#define F0900_P2_EQUA_ACCI4 0xf27601ff
-
-/*P2_EQUAQ4*/
-#define R0900_P2_EQUAQ4 0xf277
-#define F0900_P2_EQUA_ACCQ4 0xf27701ff
-
-/*P2_EQUAI5*/
-#define R0900_P2_EQUAI5 0xf278
-#define F0900_P2_EQUA_ACCI5 0xf27801ff
-
-/*P2_EQUAQ5*/
-#define R0900_P2_EQUAQ5 0xf279
-#define F0900_P2_EQUA_ACCQ5 0xf27901ff
-
-/*P2_EQUAI6*/
-#define R0900_P2_EQUAI6 0xf27a
-#define F0900_P2_EQUA_ACCI6 0xf27a01ff
-
-/*P2_EQUAQ6*/
-#define R0900_P2_EQUAQ6 0xf27b
-#define F0900_P2_EQUA_ACCQ6 0xf27b01ff
-
-/*P2_EQUAI7*/
-#define R0900_P2_EQUAI7 0xf27c
-#define F0900_P2_EQUA_ACCI7 0xf27c01ff
-
-/*P2_EQUAQ7*/
-#define R0900_P2_EQUAQ7 0xf27d
-#define F0900_P2_EQUA_ACCQ7 0xf27d01ff
-
-/*P2_EQUAI8*/
-#define R0900_P2_EQUAI8 0xf27e
-#define F0900_P2_EQUA_ACCI8 0xf27e01ff
-
-/*P2_EQUAQ8*/
-#define R0900_P2_EQUAQ8 0xf27f
-#define F0900_P2_EQUA_ACCQ8 0xf27f01ff
-
-/*P2_NNOSDATAT1*/
-#define R0900_P2_NNOSDATAT1 0xf280
-#define F0900_P2_NOSDATAT_NORMED1 0xf28000ff
-
-/*P2_NNOSDATAT0*/
-#define R0900_P2_NNOSDATAT0 0xf281
-#define F0900_P2_NOSDATAT_NORMED0 0xf28100ff
-
-/*P2_NNOSDATA1*/
-#define R0900_P2_NNOSDATA1 0xf282
-#define F0900_P2_NOSDATA_NORMED1 0xf28200ff
-
-/*P2_NNOSDATA0*/
-#define R0900_P2_NNOSDATA0 0xf283
-#define F0900_P2_NOSDATA_NORMED0 0xf28300ff
-
-/*P2_NNOSPLHT1*/
-#define R0900_P2_NNOSPLHT1 0xf284
-#define F0900_P2_NOSPLHT_NORMED1 0xf28400ff
-
-/*P2_NNOSPLHT0*/
-#define R0900_P2_NNOSPLHT0 0xf285
-#define F0900_P2_NOSPLHT_NORMED0 0xf28500ff
-
-/*P2_NNOSPLH1*/
-#define R0900_P2_NNOSPLH1 0xf286
-#define F0900_P2_NOSPLH_NORMED1 0xf28600ff
-
-/*P2_NNOSPLH0*/
-#define R0900_P2_NNOSPLH0 0xf287
-#define F0900_P2_NOSPLH_NORMED0 0xf28700ff
-
-/*P2_NOSDATAT1*/
-#define R0900_P2_NOSDATAT1 0xf288
-#define F0900_P2_NOSDATAT_UNNORMED1 0xf28800ff
-
-/*P2_NOSDATAT0*/
-#define R0900_P2_NOSDATAT0 0xf289
-#define F0900_P2_NOSDATAT_UNNORMED0 0xf28900ff
-
-/*P2_NOSDATA1*/
-#define R0900_P2_NOSDATA1 0xf28a
-#define F0900_P2_NOSDATA_UNNORMED1 0xf28a00ff
-
-/*P2_NOSDATA0*/
-#define R0900_P2_NOSDATA0 0xf28b
-#define F0900_P2_NOSDATA_UNNORMED0 0xf28b00ff
-
-/*P2_NOSPLHT1*/
-#define R0900_P2_NOSPLHT1 0xf28c
-#define F0900_P2_NOSPLHT_UNNORMED1 0xf28c00ff
-
-/*P2_NOSPLHT0*/
-#define R0900_P2_NOSPLHT0 0xf28d
-#define F0900_P2_NOSPLHT_UNNORMED0 0xf28d00ff
-
-/*P2_NOSPLH1*/
-#define R0900_P2_NOSPLH1 0xf28e
-#define F0900_P2_NOSPLH_UNNORMED1 0xf28e00ff
-
-/*P2_NOSPLH0*/
-#define R0900_P2_NOSPLH0 0xf28f
-#define F0900_P2_NOSPLH_UNNORMED0 0xf28f00ff
-
-/*P2_CAR2CFG*/
-#define R0900_P2_CAR2CFG 0xf290
-#define F0900_P2_CARRIER3_DISABLE 0xf2900040
-#define F0900_P2_ROTA2ON 0xf2900004
-#define F0900_P2_PH_DET_ALGO2 0xf2900003
-
-/*P2_CFR2CFR1*/
-#define R0900_P2_CFR2CFR1 0xf291
-#define F0900_P2_CFR2TOCFR1_DVBS1 0xf29100c0
-#define F0900_P2_EN_S2CAR2CENTER 0xf2910020
-#define F0900_P2_DIS_BCHERRCFR2 0xf2910010
-#define F0900_P2_CFR2TOCFR1_BETA 0xf2910007
-
-/*P2_CFR22*/
-#define R0900_P2_CFR22 0xf293
-#define F0900_P2_CAR2_FREQ2 0xf29301ff
-
-/*P2_CFR21*/
-#define R0900_P2_CFR21 0xf294
-#define F0900_P2_CAR2_FREQ1 0xf29400ff
-
-/*P2_CFR20*/
-#define R0900_P2_CFR20 0xf295
-#define F0900_P2_CAR2_FREQ0 0xf29500ff
-
-/*P2_ACLC2S2Q*/
-#define R0900_P2_ACLC2S2Q 0xf297
-#define F0900_P2_ENAB_SPSKSYMB 0xf2970080
-#define F0900_P2_CAR2S2_Q_ALPH_M 0xf2970030
-#define F0900_P2_CAR2S2_Q_ALPH_E 0xf297000f
-
-/*P2_ACLC2S28*/
-#define R0900_P2_ACLC2S28 0xf298
-#define F0900_P2_OLDI3Q_MODE 0xf2980080
-#define F0900_P2_CAR2S2_8_ALPH_M 0xf2980030
-#define F0900_P2_CAR2S2_8_ALPH_E 0xf298000f
-
-/*P2_ACLC2S216A*/
-#define R0900_P2_ACLC2S216A 0xf299
-#define F0900_P2_DIS_C3STOPA2 0xf2990080
-#define F0900_P2_CAR2S2_16ADERAT 0xf2990040
-#define F0900_P2_CAR2S2_16A_ALPH_M 0xf2990030
-#define F0900_P2_CAR2S2_16A_ALPH_E 0xf299000f
-
-/*P2_ACLC2S232A*/
-#define R0900_P2_ACLC2S232A 0xf29a
-#define F0900_P2_CAR2S2_32ADERAT 0xf29a0040
-#define F0900_P2_CAR2S2_32A_ALPH_M 0xf29a0030
-#define F0900_P2_CAR2S2_32A_ALPH_E 0xf29a000f
-
-/*P2_BCLC2S2Q*/
-#define R0900_P2_BCLC2S2Q 0xf29c
-#define F0900_P2_CAR2S2_Q_BETA_M 0xf29c0030
-#define F0900_P2_CAR2S2_Q_BETA_E 0xf29c000f
-
-/*P2_BCLC2S28*/
-#define R0900_P2_BCLC2S28 0xf29d
-#define F0900_P2_CAR2S2_8_BETA_M 0xf29d0030
-#define F0900_P2_CAR2S2_8_BETA_E 0xf29d000f
-
-/*P2_BCLC2S216A*/
-#define R0900_P2_BCLC2S216A 0xf29e
-
-/*P2_BCLC2S232A*/
-#define R0900_P2_BCLC2S232A 0xf29f
-
-/*P2_PLROOT2*/
-#define R0900_P2_PLROOT2 0xf2ac
-#define F0900_P2_PLSCRAMB_MODE 0xf2ac000c
-#define F0900_P2_PLSCRAMB_ROOT2 0xf2ac0003
-
-/*P2_PLROOT1*/
-#define R0900_P2_PLROOT1 0xf2ad
-#define F0900_P2_PLSCRAMB_ROOT1 0xf2ad00ff
-
-/*P2_PLROOT0*/
-#define R0900_P2_PLROOT0 0xf2ae
-#define F0900_P2_PLSCRAMB_ROOT0 0xf2ae00ff
-
-/*P2_MODCODLST0*/
-#define R0900_P2_MODCODLST0 0xf2b0
-
-/*P2_MODCODLST1*/
-#define R0900_P2_MODCODLST1 0xf2b1
-#define F0900_P2_DIS_MODCOD29 0xf2b100f0
-#define F0900_P2_DIS_32PSK_9_10 0xf2b1000f
-
-/*P2_MODCODLST2*/
-#define R0900_P2_MODCODLST2 0xf2b2
-#define F0900_P2_DIS_32PSK_8_9 0xf2b200f0
-#define F0900_P2_DIS_32PSK_5_6 0xf2b2000f
-
-/*P2_MODCODLST3*/
-#define R0900_P2_MODCODLST3 0xf2b3
-#define F0900_P2_DIS_32PSK_4_5 0xf2b300f0
-#define F0900_P2_DIS_32PSK_3_4 0xf2b3000f
-
-/*P2_MODCODLST4*/
-#define R0900_P2_MODCODLST4 0xf2b4
-#define F0900_P2_DIS_16PSK_9_10 0xf2b400f0
-#define F0900_P2_DIS_16PSK_8_9 0xf2b4000f
-
-/*P2_MODCODLST5*/
-#define R0900_P2_MODCODLST5 0xf2b5
-#define F0900_P2_DIS_16PSK_5_6 0xf2b500f0
-#define F0900_P2_DIS_16PSK_4_5 0xf2b5000f
-
-/*P2_MODCODLST6*/
-#define R0900_P2_MODCODLST6 0xf2b6
-#define F0900_P2_DIS_16PSK_3_4 0xf2b600f0
-#define F0900_P2_DIS_16PSK_2_3 0xf2b6000f
-
-/*P2_MODCODLST7*/
-#define R0900_P2_MODCODLST7 0xf2b7
-#define F0900_P2_DIS_8P_9_10 0xf2b700f0
-#define F0900_P2_DIS_8P_8_9 0xf2b7000f
-
-/*P2_MODCODLST8*/
-#define R0900_P2_MODCODLST8 0xf2b8
-#define F0900_P2_DIS_8P_5_6 0xf2b800f0
-#define F0900_P2_DIS_8P_3_4 0xf2b8000f
-
-/*P2_MODCODLST9*/
-#define R0900_P2_MODCODLST9 0xf2b9
-#define F0900_P2_DIS_8P_2_3 0xf2b900f0
-#define F0900_P2_DIS_8P_3_5 0xf2b9000f
-
-/*P2_MODCODLSTA*/
-#define R0900_P2_MODCODLSTA 0xf2ba
-#define F0900_P2_DIS_QP_9_10 0xf2ba00f0
-#define F0900_P2_DIS_QP_8_9 0xf2ba000f
-
-/*P2_MODCODLSTB*/
-#define R0900_P2_MODCODLSTB 0xf2bb
-#define F0900_P2_DIS_QP_5_6 0xf2bb00f0
-#define F0900_P2_DIS_QP_4_5 0xf2bb000f
-
-/*P2_MODCODLSTC*/
-#define R0900_P2_MODCODLSTC 0xf2bc
-#define F0900_P2_DIS_QP_3_4 0xf2bc00f0
-#define F0900_P2_DIS_QP_2_3 0xf2bc000f
-
-/*P2_MODCODLSTD*/
-#define R0900_P2_MODCODLSTD 0xf2bd
-#define F0900_P2_DIS_QP_3_5 0xf2bd00f0
-#define F0900_P2_DIS_QP_1_2 0xf2bd000f
-
-/*P2_MODCODLSTE*/
-#define R0900_P2_MODCODLSTE 0xf2be
-#define F0900_P2_DIS_QP_2_5 0xf2be00f0
-#define F0900_P2_DIS_QP_1_3 0xf2be000f
-
-/*P2_MODCODLSTF*/
-#define R0900_P2_MODCODLSTF 0xf2bf
-#define F0900_P2_DIS_QP_1_4 0xf2bf00f0
-
-/*P2_GAUSSR0*/
-#define R0900_P2_GAUSSR0 0xf2c0
-#define F0900_P2_EN_CCIMODE 0xf2c00080
-#define F0900_P2_R0_GAUSSIEN 0xf2c0007f
-
-/*P2_CCIR0*/
-#define R0900_P2_CCIR0 0xf2c1
-#define F0900_P2_CCIDETECT_PLHONLY 0xf2c10080
-#define F0900_P2_R0_CCI 0xf2c1007f
-
-/*P2_CCIQUANT*/
-#define R0900_P2_CCIQUANT 0xf2c2
-#define F0900_P2_CCI_BETA 0xf2c200e0
-#define F0900_P2_CCI_QUANT 0xf2c2001f
-
-/*P2_CCITHRES*/
-#define R0900_P2_CCITHRES 0xf2c3
-#define F0900_P2_CCI_THRESHOLD 0xf2c300ff
-
-/*P2_CCIACC*/
-#define R0900_P2_CCIACC 0xf2c4
-#define F0900_P2_CCI_VALUE 0xf2c400ff
-
-/*P2_DMDRESCFG*/
-#define R0900_P2_DMDRESCFG 0xf2c6
-#define F0900_P2_DMDRES_RESET 0xf2c60080
-#define F0900_P2_DMDRES_STRALL 0xf2c60008
-#define F0900_P2_DMDRES_NEWONLY 0xf2c60004
-#define F0900_P2_DMDRES_NOSTORE 0xf2c60002
-
-/*P2_DMDRESADR*/
-#define R0900_P2_DMDRESADR 0xf2c7
-#define F0900_P2_DMDRES_VALIDCFR 0xf2c70040
-#define F0900_P2_DMDRES_MEMFULL 0xf2c70030
-#define F0900_P2_DMDRES_RESNBR 0xf2c7000f
-
-/*P2_DMDRESDATA7*/
-#define R0900_P2_DMDRESDATA7 0xf2c8
-#define F0900_P2_DMDRES_DATA7 0xf2c800ff
-
-/*P2_DMDRESDATA6*/
-#define R0900_P2_DMDRESDATA6 0xf2c9
-#define F0900_P2_DMDRES_DATA6 0xf2c900ff
-
-/*P2_DMDRESDATA5*/
-#define R0900_P2_DMDRESDATA5 0xf2ca
-#define F0900_P2_DMDRES_DATA5 0xf2ca00ff
-
-/*P2_DMDRESDATA4*/
-#define R0900_P2_DMDRESDATA4 0xf2cb
-#define F0900_P2_DMDRES_DATA4 0xf2cb00ff
-
-/*P2_DMDRESDATA3*/
-#define R0900_P2_DMDRESDATA3 0xf2cc
-#define F0900_P2_DMDRES_DATA3 0xf2cc00ff
-
-/*P2_DMDRESDATA2*/
-#define R0900_P2_DMDRESDATA2 0xf2cd
-#define F0900_P2_DMDRES_DATA2 0xf2cd00ff
-
-/*P2_DMDRESDATA1*/
-#define R0900_P2_DMDRESDATA1 0xf2ce
-#define F0900_P2_DMDRES_DATA1 0xf2ce00ff
-
-/*P2_DMDRESDATA0*/
-#define R0900_P2_DMDRESDATA0 0xf2cf
-#define F0900_P2_DMDRES_DATA0 0xf2cf00ff
-
-/*P2_FFEI1*/
-#define R0900_P2_FFEI1 0xf2d0
-#define F0900_P2_FFE_ACCI1 0xf2d001ff
-
-/*P2_FFEQ1*/
-#define R0900_P2_FFEQ1 0xf2d1
-#define F0900_P2_FFE_ACCQ1 0xf2d101ff
-
-/*P2_FFEI2*/
-#define R0900_P2_FFEI2 0xf2d2
-#define F0900_P2_FFE_ACCI2 0xf2d201ff
-
-/*P2_FFEQ2*/
-#define R0900_P2_FFEQ2 0xf2d3
-#define F0900_P2_FFE_ACCQ2 0xf2d301ff
-
-/*P2_FFEI3*/
-#define R0900_P2_FFEI3 0xf2d4
-#define F0900_P2_FFE_ACCI3 0xf2d401ff
-
-/*P2_FFEQ3*/
-#define R0900_P2_FFEQ3 0xf2d5
-#define F0900_P2_FFE_ACCQ3 0xf2d501ff
-
-/*P2_FFEI4*/
-#define R0900_P2_FFEI4 0xf2d6
-#define F0900_P2_FFE_ACCI4 0xf2d601ff
-
-/*P2_FFEQ4*/
-#define R0900_P2_FFEQ4 0xf2d7
-#define F0900_P2_FFE_ACCQ4 0xf2d701ff
-
-/*P2_FFECFG*/
-#define R0900_P2_FFECFG 0xf2d8
-#define F0900_P2_EQUALFFE_ON 0xf2d80040
-#define F0900_P2_MU_EQUALFFE 0xf2d80007
-
-/*P2_TNRCFG*/
-#define R0900_P2_TNRCFG 0xf2e0
-#define F0900_P2_TUN_ACKFAIL 0xf2e00080
-#define F0900_P2_TUN_TYPE 0xf2e00070
-#define F0900_P2_TUN_SECSTOP 0xf2e00008
-#define F0900_P2_TUN_VCOSRCH 0xf2e00004
-#define F0900_P2_TUN_MADDRESS 0xf2e00003
-
-/*P2_TNRCFG2*/
-#define R0900_P2_TNRCFG2 0xf2e1
-#define F0900_P2_TUN_IQSWAP 0xf2e10080
-#define F0900_P2_DIS_BWCALC 0xf2e10004
-#define F0900_P2_SHORT_WAITSTATES 0xf2e10002
-
-/*P2_TNRXTAL*/
-#define R0900_P2_TNRXTAL 0xf2e4
-#define F0900_P2_TUN_XTALFREQ 0xf2e4001f
-
-/*P2_TNRSTEPS*/
-#define R0900_P2_TNRSTEPS 0xf2e7
-#define F0900_P2_TUNER_BW0P125 0xf2e70080
-#define F0900_P2_BWINC_OFFSET 0xf2e70170
-#define F0900_P2_SOFTSTEP_RNG 0xf2e70008
-#define F0900_P2_TUN_BWOFFSET 0xf2e70007
-
-/*P2_TNRGAIN*/
-#define R0900_P2_TNRGAIN 0xf2e8
-#define F0900_P2_TUN_KDIVEN 0xf2e800c0
-#define F0900_P2_STB6X00_OCK 0xf2e80030
-#define F0900_P2_TUN_GAIN 0xf2e8000f
-
-/*P2_TNRRF1*/
-#define R0900_P2_TNRRF1 0xf2e9
-#define F0900_P2_TUN_RFFREQ2 0xf2e900ff
-
-/*P2_TNRRF0*/
-#define R0900_P2_TNRRF0 0xf2ea
-#define F0900_P2_TUN_RFFREQ1 0xf2ea00ff
-
-/*P2_TNRBW*/
-#define R0900_P2_TNRBW 0xf2eb
-#define F0900_P2_TUN_RFFREQ0 0xf2eb00c0
-#define F0900_P2_TUN_BW 0xf2eb003f
-
-/*P2_TNRADJ*/
-#define R0900_P2_TNRADJ 0xf2ec
-#define F0900_P2_STB61X0_CALTIME 0xf2ec0040
-
-/*P2_TNRCTL2*/
-#define R0900_P2_TNRCTL2 0xf2ed
-#define F0900_P2_STB61X0_RCCKOFF 0xf2ed0080
-#define F0900_P2_STB61X0_ICP_SDOFF 0xf2ed0040
-#define F0900_P2_STB61X0_DCLOOPOFF 0xf2ed0020
-#define F0900_P2_STB61X0_REFOUTSEL 0xf2ed0010
-#define F0900_P2_STB61X0_CALOFF 0xf2ed0008
-#define F0900_P2_STB6XX0_LPT_BEN 0xf2ed0004
-#define F0900_P2_STB6XX0_RX_OSCP 0xf2ed0002
-#define F0900_P2_STB6XX0_SYN 0xf2ed0001
-
-/*P2_TNRCFG3*/
-#define R0900_P2_TNRCFG3 0xf2ee
-#define F0900_P2_TUN_PLLFREQ 0xf2ee001c
-#define F0900_P2_TUN_I2CFREQ_MODE 0xf2ee0003
-
-/*P2_TNRLAUNCH*/
-#define R0900_P2_TNRLAUNCH 0xf2f0
-
-/*P2_TNRLD*/
-#define R0900_P2_TNRLD 0xf2f0
-#define F0900_P2_TUNLD_VCOING 0xf2f00080
-#define F0900_P2_TUN_REG1FAIL 0xf2f00040
-#define F0900_P2_TUN_REG2FAIL 0xf2f00020
-#define F0900_P2_TUN_REG3FAIL 0xf2f00010
-#define F0900_P2_TUN_REG4FAIL 0xf2f00008
-#define F0900_P2_TUN_REG5FAIL 0xf2f00004
-#define F0900_P2_TUN_BWING 0xf2f00002
-#define F0900_P2_TUN_LOCKED 0xf2f00001
-
-/*P2_TNROBSL*/
-#define R0900_P2_TNROBSL 0xf2f6
-#define F0900_P2_TUN_I2CABORTED 0xf2f60080
-#define F0900_P2_TUN_LPEN 0xf2f60040
-#define F0900_P2_TUN_FCCK 0xf2f60020
-#define F0900_P2_TUN_I2CLOCKED 0xf2f60010
-#define F0900_P2_TUN_PROGDONE 0xf2f6000c
-#define F0900_P2_TUN_RFRESTE1 0xf2f60003
-
-/*P2_TNRRESTE*/
-#define R0900_P2_TNRRESTE 0xf2f7
-#define F0900_P2_TUN_RFRESTE0 0xf2f700ff
-
-/*P2_SMAPCOEF7*/
-#define R0900_P2_SMAPCOEF7 0xf300
-#define F0900_P2_DIS_QSCALE 0xf3000080
-#define F0900_P2_SMAPCOEF_Q_LLR12 0xf300017f
-
-/*P2_SMAPCOEF6*/
-#define R0900_P2_SMAPCOEF6 0xf301
-#define F0900_P2_ADJ_8PSKLLR1 0xf3010004
-#define F0900_P2_OLD_8PSKLLR1 0xf3010002
-#define F0900_P2_DIS_AB8PSK 0xf3010001
-
-/*P2_SMAPCOEF5*/
-#define R0900_P2_SMAPCOEF5 0xf302
-#define F0900_P2_DIS_8SCALE 0xf3020080
-#define F0900_P2_SMAPCOEF_8P_LLR23 0xf302017f
-
-/*P2_NCO2MAX1*/
-#define R0900_P2_NCO2MAX1 0xf314
-#define F0900_P2_TETA2_MAXVABS1 0xf31400ff
-
-/*P2_NCO2MAX0*/
-#define R0900_P2_NCO2MAX0 0xf315
-#define F0900_P2_TETA2_MAXVABS0 0xf31500ff
-
-/*P2_NCO2FR1*/
-#define R0900_P2_NCO2FR1 0xf316
-#define F0900_P2_NCO2FINAL_ANGLE1 0xf31600ff
-
-/*P2_NCO2FR0*/
-#define R0900_P2_NCO2FR0 0xf317
-#define F0900_P2_NCO2FINAL_ANGLE0 0xf31700ff
-
-/*P2_CFR2AVRGE1*/
-#define R0900_P2_CFR2AVRGE1 0xf318
-#define F0900_P2_I2C_CFR2AVERAGE1 0xf31800ff
-
-/*P2_CFR2AVRGE0*/
-#define R0900_P2_CFR2AVRGE0 0xf319
-#define F0900_P2_I2C_CFR2AVERAGE0 0xf31900ff
-
-/*P2_DMDPLHSTAT*/
-#define R0900_P2_DMDPLHSTAT 0xf320
-#define F0900_P2_PLH_STATISTIC 0xf32000ff
-
-/*P2_LOCKTIME3*/
-#define R0900_P2_LOCKTIME3 0xf322
-#define F0900_P2_DEMOD_LOCKTIME3 0xf32200ff
-
-/*P2_LOCKTIME2*/
-#define R0900_P2_LOCKTIME2 0xf323
-#define F0900_P2_DEMOD_LOCKTIME2 0xf32300ff
-
-/*P2_LOCKTIME1*/
-#define R0900_P2_LOCKTIME1 0xf324
-#define F0900_P2_DEMOD_LOCKTIME1 0xf32400ff
-
-/*P2_LOCKTIME0*/
-#define R0900_P2_LOCKTIME0 0xf325
-#define F0900_P2_DEMOD_LOCKTIME0 0xf32500ff
-
-/*P2_VITSCALE*/
-#define R0900_P2_VITSCALE 0xf332
-#define F0900_P2_NVTH_NOSRANGE 0xf3320080
-#define F0900_P2_VERROR_MAXMODE 0xf3320040
-#define F0900_P2_NSLOWSN_LOCKED 0xf3320008
-#define F0900_P2_DIS_RSFLOCK 0xf3320002
-
-/*P2_FECM*/
-#define R0900_P2_FECM 0xf333
-#define F0900_P2_DSS_DVB 0xf3330080
-#define F0900_P2_DSS_SRCH 0xf3330010
-#define F0900_P2_SYNCVIT 0xf3330002
-#define F0900_P2_IQINV 0xf3330001
-
-/*P2_VTH12*/
-#define R0900_P2_VTH12 0xf334
-#define F0900_P2_VTH12 0xf33400ff
-
-/*P2_VTH23*/
-#define R0900_P2_VTH23 0xf335
-#define F0900_P2_VTH23 0xf33500ff
-
-/*P2_VTH34*/
-#define R0900_P2_VTH34 0xf336
-#define F0900_P2_VTH34 0xf33600ff
-
-/*P2_VTH56*/
-#define R0900_P2_VTH56 0xf337
-#define F0900_P2_VTH56 0xf33700ff
-
-/*P2_VTH67*/
-#define R0900_P2_VTH67 0xf338
-#define F0900_P2_VTH67 0xf33800ff
-
-/*P2_VTH78*/
-#define R0900_P2_VTH78 0xf339
-#define F0900_P2_VTH78 0xf33900ff
-
-/*P2_VITCURPUN*/
-#define R0900_P2_VITCURPUN 0xf33a
-#define F0900_P2_VIT_CURPUN 0xf33a001f
-
-/*P2_VERROR*/
-#define R0900_P2_VERROR 0xf33b
-#define F0900_P2_REGERR_VIT 0xf33b00ff
-
-/*P2_PRVIT*/
-#define R0900_P2_PRVIT 0xf33c
-#define F0900_P2_DIS_VTHLOCK 0xf33c0040
-#define F0900_P2_E7_8VIT 0xf33c0020
-#define F0900_P2_E6_7VIT 0xf33c0010
-#define F0900_P2_E5_6VIT 0xf33c0008
-#define F0900_P2_E3_4VIT 0xf33c0004
-#define F0900_P2_E2_3VIT 0xf33c0002
-#define F0900_P2_E1_2VIT 0xf33c0001
-
-/*P2_VAVSRVIT*/
-#define R0900_P2_VAVSRVIT 0xf33d
-#define F0900_P2_AMVIT 0xf33d0080
-#define F0900_P2_FROZENVIT 0xf33d0040
-#define F0900_P2_SNVIT 0xf33d0030
-#define F0900_P2_TOVVIT 0xf33d000c
-#define F0900_P2_HYPVIT 0xf33d0003
-
-/*P2_VSTATUSVIT*/
-#define R0900_P2_VSTATUSVIT 0xf33e
-#define F0900_P2_PRFVIT 0xf33e0010
-#define F0900_P2_LOCKEDVIT 0xf33e0008
-
-/*P2_VTHINUSE*/
-#define R0900_P2_VTHINUSE 0xf33f
-#define F0900_P2_VIT_INUSE 0xf33f00ff
-
-/*P2_KDIV12*/
-#define R0900_P2_KDIV12 0xf340
-#define F0900_P2_K_DIVIDER_12 0xf340007f
-
-/*P2_KDIV23*/
-#define R0900_P2_KDIV23 0xf341
-#define F0900_P2_K_DIVIDER_23 0xf341007f
-
-/*P2_KDIV34*/
-#define R0900_P2_KDIV34 0xf342
-#define F0900_P2_K_DIVIDER_34 0xf342007f
-
-/*P2_KDIV56*/
-#define R0900_P2_KDIV56 0xf343
-#define F0900_P2_K_DIVIDER_56 0xf343007f
-
-/*P2_KDIV67*/
-#define R0900_P2_KDIV67 0xf344
-#define F0900_P2_K_DIVIDER_67 0xf344007f
-
-/*P2_KDIV78*/
-#define R0900_P2_KDIV78 0xf345
-#define F0900_P2_K_DIVIDER_78 0xf345007f
-
-/*P2_PDELCTRL1*/
-#define R0900_P2_PDELCTRL1 0xf350
-#define F0900_P2_INV_MISMASK 0xf3500080
-#define F0900_P2_FILTER_EN 0xf3500020
-#define F0900_P2_EN_MIS00 0xf3500002
-#define F0900_P2_ALGOSWRST 0xf3500001
-
-/*P2_PDELCTRL2*/
-#define R0900_P2_PDELCTRL2 0xf351
-#define F0900_P2_RESET_UPKO_COUNT 0xf3510040
-#define F0900_P2_FRAME_MODE 0xf3510002
-#define F0900_P2_NOBCHERRFLG_USE 0xf3510001
-
-/*P2_HYSTTHRESH*/
-#define R0900_P2_HYSTTHRESH 0xf354
-#define F0900_P2_UNLCK_THRESH 0xf35400f0
-#define F0900_P2_DELIN_LCK_THRESH 0xf354000f
-
-/*P2_ISIENTRY*/
-#define R0900_P2_ISIENTRY 0xf35e
-#define F0900_P2_ISI_ENTRY 0xf35e00ff
-
-/*P2_ISIBITENA*/
-#define R0900_P2_ISIBITENA 0xf35f
-#define F0900_P2_ISI_BIT_EN 0xf35f00ff
-
-/*P2_MATSTR1*/
-#define R0900_P2_MATSTR1 0xf360
-#define F0900_P2_MATYPE_CURRENT1 0xf36000ff
-
-/*P2_MATSTR0*/
-#define R0900_P2_MATSTR0 0xf361
-#define F0900_P2_MATYPE_CURRENT0 0xf36100ff
-
-/*P2_UPLSTR1*/
-#define R0900_P2_UPLSTR1 0xf362
-#define F0900_P2_UPL_CURRENT1 0xf36200ff
-
-/*P2_UPLSTR0*/
-#define R0900_P2_UPLSTR0 0xf363
-#define F0900_P2_UPL_CURRENT0 0xf36300ff
-
-/*P2_DFLSTR1*/
-#define R0900_P2_DFLSTR1 0xf364
-#define F0900_P2_DFL_CURRENT1 0xf36400ff
-
-/*P2_DFLSTR0*/
-#define R0900_P2_DFLSTR0 0xf365
-#define F0900_P2_DFL_CURRENT0 0xf36500ff
-
-/*P2_SYNCSTR*/
-#define R0900_P2_SYNCSTR 0xf366
-#define F0900_P2_SYNC_CURRENT 0xf36600ff
-
-/*P2_SYNCDSTR1*/
-#define R0900_P2_SYNCDSTR1 0xf367
-#define F0900_P2_SYNCD_CURRENT1 0xf36700ff
-
-/*P2_SYNCDSTR0*/
-#define R0900_P2_SYNCDSTR0 0xf368
-#define F0900_P2_SYNCD_CURRENT0 0xf36800ff
-
-/*P2_PDELSTATUS1*/
-#define R0900_P2_PDELSTATUS1 0xf369
-#define F0900_P2_PKTDELIN_DELOCK 0xf3690080
-#define F0900_P2_SYNCDUPDFL_BADDFL 0xf3690040
-#define F0900_P2_CONTINUOUS_STREAM 0xf3690020
-#define F0900_P2_UNACCEPTED_STREAM 0xf3690010
-#define F0900_P2_BCH_ERROR_FLAG 0xf3690008
-#define F0900_P2_PKTDELIN_LOCK 0xf3690002
-#define F0900_P2_FIRST_LOCK 0xf3690001
-
-/*P2_PDELSTATUS2*/
-#define R0900_P2_PDELSTATUS2 0xf36a
-#define F0900_P2_FRAME_MODCOD 0xf36a007c
-#define F0900_P2_FRAME_TYPE 0xf36a0003
-
-/*P2_BBFCRCKO1*/
-#define R0900_P2_BBFCRCKO1 0xf36b
-#define F0900_P2_BBHCRC_KOCNT1 0xf36b00ff
-
-/*P2_BBFCRCKO0*/
-#define R0900_P2_BBFCRCKO0 0xf36c
-#define F0900_P2_BBHCRC_KOCNT0 0xf36c00ff
-
-/*P2_UPCRCKO1*/
-#define R0900_P2_UPCRCKO1 0xf36d
-#define F0900_P2_PKTCRC_KOCNT1 0xf36d00ff
-
-/*P2_UPCRCKO0*/
-#define R0900_P2_UPCRCKO0 0xf36e
-#define F0900_P2_PKTCRC_KOCNT0 0xf36e00ff
-
-/*P2_PDELCTRL3*/
-#define R0900_P2_PDELCTRL3 0xf36f
-#define F0900_P2_PKTDEL_CONTFAIL 0xf36f0080
-#define F0900_P2_NOFIFO_BCHERR 0xf36f0020
-
-/*P2_TSSTATEM*/
-#define R0900_P2_TSSTATEM 0xf370
-#define F0900_P2_TSDIL_ON 0xf3700080
-#define F0900_P2_TSRS_ON 0xf3700020
-#define F0900_P2_TSDESCRAMB_ON 0xf3700010
-#define F0900_P2_TSFRAME_MODE 0xf3700008
-#define F0900_P2_TS_DISABLE 0xf3700004
-#define F0900_P2_TSOUT_NOSYNC 0xf3700001
-
-/*P2_TSCFGH*/
-#define R0900_P2_TSCFGH 0xf372
-#define F0900_P2_TSFIFO_DVBCI 0xf3720080
-#define F0900_P2_TSFIFO_SERIAL 0xf3720040
-#define F0900_P2_TSFIFO_TEIUPDATE 0xf3720020
-#define F0900_P2_TSFIFO_DUTY50 0xf3720010
-#define F0900_P2_TSFIFO_HSGNLOUT 0xf3720008
-#define F0900_P2_TSFIFO_ERRMODE 0xf3720006
-#define F0900_P2_RST_HWARE 0xf3720001
-
-/*P2_TSCFGM*/
-#define R0900_P2_TSCFGM 0xf373
-#define F0900_P2_TSFIFO_MANSPEED 0xf37300c0
-#define F0900_P2_TSFIFO_PERMDATA 0xf3730020
-#define F0900_P2_TSFIFO_DPUNACT 0xf3730002
-#define F0900_P2_TSFIFO_INVDATA 0xf3730001
-
-/*P2_TSCFGL*/
-#define R0900_P2_TSCFGL 0xf374
-#define F0900_P2_TSFIFO_BCLKDEL1CK 0xf37400c0
-#define F0900_P2_BCHERROR_MODE 0xf3740030
-#define F0900_P2_TSFIFO_NSGNL2DATA 0xf3740008
-#define F0900_P2_TSFIFO_EMBINDVB 0xf3740004
-#define F0900_P2_TSFIFO_BITSPEED 0xf3740003
-
-/*P2_TSINSDELH*/
-#define R0900_P2_TSINSDELH 0xf376
-#define F0900_P2_TSDEL_SYNCBYTE 0xf3760080
-#define F0900_P2_TSDEL_XXHEADER 0xf3760040
-#define F0900_P2_TSDEL_BBHEADER 0xf3760020
-#define F0900_P2_TSDEL_DATAFIELD 0xf3760010
-#define F0900_P2_TSINSDEL_ISCR 0xf3760008
-#define F0900_P2_TSINSDEL_NPD 0xf3760004
-#define F0900_P2_TSINSDEL_RSPARITY 0xf3760002
-#define F0900_P2_TSINSDEL_CRC8 0xf3760001
-
-/*P2_TSDIVN*/
-#define R0900_P2_TSDIVN 0xf379
-#define F0900_P2_TSFIFO_SPEEDMODE 0xf37900c0
-
-/*P2_TSCFG4*/
-#define R0900_P2_TSCFG4 0xf37a
-#define F0900_P2_TSFIFO_TSSPEEDMODE 0xf37a00c0
-
-/*P2_TSSPEED*/
-#define R0900_P2_TSSPEED 0xf380
-#define F0900_P2_TSFIFO_OUTSPEED 0xf38000ff
-
-/*P2_TSSTATUS*/
-#define R0900_P2_TSSTATUS 0xf381
-#define F0900_P2_TSFIFO_LINEOK 0xf3810080
-#define F0900_P2_TSFIFO_ERROR 0xf3810040
-#define F0900_P2_DIL_READY 0xf3810001
-
-/*P2_TSSTATUS2*/
-#define R0900_P2_TSSTATUS2 0xf382
-#define F0900_P2_TSFIFO_DEMODSEL 0xf3820080
-#define F0900_P2_TSFIFOSPEED_STORE 0xf3820040
-#define F0900_P2_DILXX_RESET 0xf3820020
-#define F0900_P2_TSSERIAL_IMPOS 0xf3820010
-#define F0900_P2_SCRAMBDETECT 0xf3820002
-
-/*P2_TSBITRATE1*/
-#define R0900_P2_TSBITRATE1 0xf383
-#define F0900_P2_TSFIFO_BITRATE1 0xf38300ff
-
-/*P2_TSBITRATE0*/
-#define R0900_P2_TSBITRATE0 0xf384
-#define F0900_P2_TSFIFO_BITRATE0 0xf38400ff
-
-/*P2_ERRCTRL1*/
-#define R0900_P2_ERRCTRL1 0xf398
-#define F0900_P2_ERR_SOURCE1 0xf39800f0
-#define F0900_P2_NUM_EVENT1 0xf3980007
-
-/*P2_ERRCNT12*/
-#define R0900_P2_ERRCNT12 0xf399
-#define F0900_P2_ERRCNT1_OLDVALUE 0xf3990080
-#define F0900_P2_ERR_CNT12 0xf399007f
-
-/*P2_ERRCNT11*/
-#define R0900_P2_ERRCNT11 0xf39a
-#define F0900_P2_ERR_CNT11 0xf39a00ff
-
-/*P2_ERRCNT10*/
-#define R0900_P2_ERRCNT10 0xf39b
-#define F0900_P2_ERR_CNT10 0xf39b00ff
-
-/*P2_ERRCTRL2*/
-#define R0900_P2_ERRCTRL2 0xf39c
-#define F0900_P2_ERR_SOURCE2 0xf39c00f0
-#define F0900_P2_NUM_EVENT2 0xf39c0007
-
-/*P2_ERRCNT22*/
-#define R0900_P2_ERRCNT22 0xf39d
-#define F0900_P2_ERRCNT2_OLDVALUE 0xf39d0080
-#define F0900_P2_ERR_CNT22 0xf39d007f
-
-/*P2_ERRCNT21*/
-#define R0900_P2_ERRCNT21 0xf39e
-#define F0900_P2_ERR_CNT21 0xf39e00ff
-
-/*P2_ERRCNT20*/
-#define R0900_P2_ERRCNT20 0xf39f
-#define F0900_P2_ERR_CNT20 0xf39f00ff
-
-/*P2_FECSPY*/
-#define R0900_P2_FECSPY 0xf3a0
-#define F0900_P2_SPY_ENABLE 0xf3a00080
-#define F0900_P2_NO_SYNCBYTE 0xf3a00040
-#define F0900_P2_SERIAL_MODE 0xf3a00020
-#define F0900_P2_UNUSUAL_PACKET 0xf3a00010
-#define F0900_P2_BERMETER_DATAMODE 0xf3a00008
-#define F0900_P2_BERMETER_LMODE 0xf3a00002
-#define F0900_P2_BERMETER_RESET 0xf3a00001
-
-/*P2_FSPYCFG*/
-#define R0900_P2_FSPYCFG 0xf3a1
-#define F0900_P2_FECSPY_INPUT 0xf3a100c0
-#define F0900_P2_RST_ON_ERROR 0xf3a10020
-#define F0900_P2_ONE_SHOT 0xf3a10010
-#define F0900_P2_I2C_MODE 0xf3a1000c
-#define F0900_P2_SPY_HYSTERESIS 0xf3a10003
-
-/*P2_FSPYDATA*/
-#define R0900_P2_FSPYDATA 0xf3a2
-#define F0900_P2_SPY_STUFFING 0xf3a20080
-#define F0900_P2_SPY_CNULLPKT 0xf3a20020
-#define F0900_P2_SPY_OUTDATA_MODE 0xf3a2001f
-
-/*P2_FSPYOUT*/
-#define R0900_P2_FSPYOUT 0xf3a3
-#define F0900_P2_FSPY_DIRECT 0xf3a30080
-#define F0900_P2_STUFF_MODE 0xf3a30007
-
-/*P2_FSTATUS*/
-#define R0900_P2_FSTATUS 0xf3a4
-#define F0900_P2_SPY_ENDSIM 0xf3a40080
-#define F0900_P2_VALID_SIM 0xf3a40040
-#define F0900_P2_FOUND_SIGNAL 0xf3a40020
-#define F0900_P2_DSS_SYNCBYTE 0xf3a40010
-#define F0900_P2_RESULT_STATE 0xf3a4000f
-
-/*P2_FBERCPT4*/
-#define R0900_P2_FBERCPT4 0xf3a8
-#define F0900_P2_FBERMETER_CPT4 0xf3a800ff
-
-/*P2_FBERCPT3*/
-#define R0900_P2_FBERCPT3 0xf3a9
-#define F0900_P2_FBERMETER_CPT3 0xf3a900ff
-
-/*P2_FBERCPT2*/
-#define R0900_P2_FBERCPT2 0xf3aa
-#define F0900_P2_FBERMETER_CPT2 0xf3aa00ff
-
-/*P2_FBERCPT1*/
-#define R0900_P2_FBERCPT1 0xf3ab
-#define F0900_P2_FBERMETER_CPT1 0xf3ab00ff
-
-/*P2_FBERCPT0*/
-#define R0900_P2_FBERCPT0 0xf3ac
-#define F0900_P2_FBERMETER_CPT0 0xf3ac00ff
-
-/*P2_FBERERR2*/
-#define R0900_P2_FBERERR2 0xf3ad
-#define F0900_P2_FBERMETER_ERR2 0xf3ad00ff
-
-/*P2_FBERERR1*/
-#define R0900_P2_FBERERR1 0xf3ae
-#define F0900_P2_FBERMETER_ERR1 0xf3ae00ff
-
-/*P2_FBERERR0*/
-#define R0900_P2_FBERERR0 0xf3af
-#define F0900_P2_FBERMETER_ERR0 0xf3af00ff
-
-/*P2_FSPYBER*/
-#define R0900_P2_FSPYBER 0xf3b2
-#define F0900_P2_FSPYBER_SYNCBYTE 0xf3b20010
-#define F0900_P2_FSPYBER_UNSYNC 0xf3b20008
-#define F0900_P2_FSPYBER_CTIME 0xf3b20007
-
-/*P1_IQCONST*/
-#define R0900_P1_IQCONST 0xf400
-#define IQCONST REGx(R0900_P1_IQCONST)
-#define F0900_P1_CONSTEL_SELECT 0xf4000060
-#define F0900_P1_IQSYMB_SEL 0xf400001f
-
-/*P1_NOSCFG*/
-#define R0900_P1_NOSCFG 0xf401
-#define NOSCFG REGx(R0900_P1_NOSCFG)
-#define F0900_P1_DUMMYPL_NOSDATA 0xf4010020
-#define F0900_P1_NOSPLH_BETA 0xf4010018
-#define F0900_P1_NOSDATA_BETA 0xf4010007
-
-/*P1_ISYMB*/
-#define R0900_P1_ISYMB 0xf402
-#define ISYMB REGx(R0900_P1_ISYMB)
-#define F0900_P1_I_SYMBOL 0xf40201ff
-
-/*P1_QSYMB*/
-#define R0900_P1_QSYMB 0xf403
-#define QSYMB REGx(R0900_P1_QSYMB)
-#define F0900_P1_Q_SYMBOL 0xf40301ff
-
-/*P1_AGC1CFG*/
-#define R0900_P1_AGC1CFG 0xf404
-#define AGC1CFG REGx(R0900_P1_AGC1CFG)
-#define F0900_P1_DC_FROZEN 0xf4040080
-#define F0900_P1_DC_CORRECT 0xf4040040
-#define F0900_P1_AMM_FROZEN 0xf4040020
-#define F0900_P1_AMM_CORRECT 0xf4040010
-#define F0900_P1_QUAD_FROZEN 0xf4040008
-#define F0900_P1_QUAD_CORRECT 0xf4040004
-
-/*P1_AGC1CN*/
-#define R0900_P1_AGC1CN 0xf406
-#define AGC1CN REGx(R0900_P1_AGC1CN)
-#define F0900_P1_AGC1_LOCKED 0xf4060080
-#define F0900_P1_AGC1_MINPOWER 0xf4060010
-#define F0900_P1_AGCOUT_FAST 0xf4060008
-#define F0900_P1_AGCIQ_BETA 0xf4060007
-
-/*P1_AGC1REF*/
-#define R0900_P1_AGC1REF 0xf407
-#define AGC1REF REGx(R0900_P1_AGC1REF)
-#define F0900_P1_AGCIQ_REF 0xf40700ff
-
-/*P1_IDCCOMP*/
-#define R0900_P1_IDCCOMP 0xf408
-#define IDCCOMP REGx(R0900_P1_IDCCOMP)
-#define F0900_P1_IAVERAGE_ADJ 0xf40801ff
-
-/*P1_QDCCOMP*/
-#define R0900_P1_QDCCOMP 0xf409
-#define QDCCOMP REGx(R0900_P1_QDCCOMP)
-#define F0900_P1_QAVERAGE_ADJ 0xf40901ff
-
-/*P1_POWERI*/
-#define R0900_P1_POWERI 0xf40a
-#define POWERI REGx(R0900_P1_POWERI)
-#define F0900_P1_POWER_I 0xf40a00ff
-#define POWER_I FLDx(F0900_P1_POWER_I)
-
-/*P1_POWERQ*/
-#define R0900_P1_POWERQ 0xf40b
-#define POWERQ REGx(R0900_P1_POWERQ)
-#define F0900_P1_POWER_Q 0xf40b00ff
-#define POWER_Q FLDx(F0900_P1_POWER_Q)
-
-/*P1_AGC1AMM*/
-#define R0900_P1_AGC1AMM 0xf40c
-#define AGC1AMM REGx(R0900_P1_AGC1AMM)
-#define F0900_P1_AMM_VALUE 0xf40c00ff
-
-/*P1_AGC1QUAD*/
-#define R0900_P1_AGC1QUAD 0xf40d
-#define AGC1QUAD REGx(R0900_P1_AGC1QUAD)
-#define F0900_P1_QUAD_VALUE 0xf40d01ff
-
-/*P1_AGCIQIN1*/
-#define R0900_P1_AGCIQIN1 0xf40e
-#define AGCIQIN1 REGx(R0900_P1_AGCIQIN1)
-#define F0900_P1_AGCIQ_VALUE1 0xf40e00ff
-#define AGCIQ_VALUE1 FLDx(F0900_P1_AGCIQ_VALUE1)
-
-/*P1_AGCIQIN0*/
-#define R0900_P1_AGCIQIN0 0xf40f
-#define AGCIQIN0 REGx(R0900_P1_AGCIQIN0)
-#define F0900_P1_AGCIQ_VALUE0 0xf40f00ff
-#define AGCIQ_VALUE0 FLDx(F0900_P1_AGCIQ_VALUE0)
-
-/*P1_DEMOD*/
-#define R0900_P1_DEMOD 0xf410
-#define DEMOD REGx(R0900_P1_DEMOD)
-#define F0900_P1_MANUALS2_ROLLOFF 0xf4100080
-#define MANUALS2_ROLLOFF FLDx(F0900_P1_MANUALS2_ROLLOFF)
-
-#define F0900_P1_SPECINV_CONTROL 0xf4100030
-#define SPECINV_CONTROL FLDx(F0900_P1_SPECINV_CONTROL)
-#define F0900_P1_FORCE_ENASAMP 0xf4100008
-#define F0900_P1_MANUALSX_ROLLOFF 0xf4100004
-#define MANUALSX_ROLLOFF FLDx(F0900_P1_MANUALSX_ROLLOFF)
-#define F0900_P1_ROLLOFF_CONTROL 0xf4100003
-#define ROLLOFF_CONTROL FLDx(F0900_P1_ROLLOFF_CONTROL)
-
-/*P1_DMDMODCOD*/
-#define R0900_P1_DMDMODCOD 0xf411
-#define DMDMODCOD REGx(R0900_P1_DMDMODCOD)
-#define F0900_P1_MANUAL_MODCOD 0xf4110080
-#define F0900_P1_DEMOD_MODCOD 0xf411007c
-#define DEMOD_MODCOD FLDx(F0900_P1_DEMOD_MODCOD)
-#define F0900_P1_DEMOD_TYPE 0xf4110003
-#define DEMOD_TYPE FLDx(F0900_P1_DEMOD_TYPE)
-
-/*P1_DSTATUS*/
-#define R0900_P1_DSTATUS 0xf412
-#define DSTATUS REGx(R0900_P1_DSTATUS)
-#define F0900_P1_CAR_LOCK 0xf4120080
-#define F0900_P1_TMGLOCK_QUALITY 0xf4120060
-#define TMGLOCK_QUALITY FLDx(F0900_P1_TMGLOCK_QUALITY)
-#define F0900_P1_LOCK_DEFINITIF 0xf4120008
-#define LOCK_DEFINITIF FLDx(F0900_P1_LOCK_DEFINITIF)
-#define F0900_P1_OVADC_DETECT 0xf4120001
-
-/*P1_DSTATUS2*/
-#define R0900_P1_DSTATUS2 0xf413
-#define DSTATUS2 REGx(R0900_P1_DSTATUS2)
-#define F0900_P1_DEMOD_DELOCK 0xf4130080
-#define F0900_P1_AGC1_NOSIGNALACK 0xf4130008
-#define F0900_P1_AGC2_OVERFLOW 0xf4130004
-#define F0900_P1_CFR_OVERFLOW 0xf4130002
-#define F0900_P1_GAMMA_OVERUNDER 0xf4130001
-
-/*P1_DMDCFGMD*/
-#define R0900_P1_DMDCFGMD 0xf414
-#define DMDCFGMD REGx(R0900_P1_DMDCFGMD)
-#define F0900_P1_DVBS2_ENABLE 0xf4140080
-#define DVBS2_ENABLE FLDx(F0900_P1_DVBS2_ENABLE)
-#define F0900_P1_DVBS1_ENABLE 0xf4140040
-#define DVBS1_ENABLE FLDx(F0900_P1_DVBS1_ENABLE)
-#define F0900_P1_SCAN_ENABLE 0xf4140010
-#define SCAN_ENABLE FLDx(F0900_P1_SCAN_ENABLE)
-#define F0900_P1_CFR_AUTOSCAN 0xf4140008
-#define CFR_AUTOSCAN FLDx(F0900_P1_CFR_AUTOSCAN)
-#define F0900_P1_TUN_RNG 0xf4140003
-
-/*P1_DMDCFG2*/
-#define R0900_P1_DMDCFG2 0xf415
-#define DMDCFG2 REGx(R0900_P1_DMDCFG2)
-#define F0900_P1_S1S2_SEQUENTIAL 0xf4150040
-#define S1S2_SEQUENTIAL FLDx(F0900_P1_S1S2_SEQUENTIAL)
-#define F0900_P1_INFINITE_RELOCK 0xf4150010
-
-/*P1_DMDISTATE*/
-#define R0900_P1_DMDISTATE 0xf416
-#define DMDISTATE REGx(R0900_P1_DMDISTATE)
-#define F0900_P1_I2C_DEMOD_MODE 0xf416001f
-#define DEMOD_MODE FLDx(F0900_P1_I2C_DEMOD_MODE)
-
-/*P1_DMDT0M*/
-#define R0900_P1_DMDT0M 0xf417
-#define DMDT0M REGx(R0900_P1_DMDT0M)
-#define F0900_P1_DMDT0_MIN 0xf41700ff
-
-/*P1_DMDSTATE*/
-#define R0900_P1_DMDSTATE 0xf41b
-#define DMDSTATE REGx(R0900_P1_DMDSTATE)
-#define F0900_P1_HEADER_MODE 0xf41b0060
-#define HEADER_MODE FLDx(F0900_P1_HEADER_MODE)
-
-/*P1_DMDFLYW*/
-#define R0900_P1_DMDFLYW 0xf41c
-#define DMDFLYW REGx(R0900_P1_DMDFLYW)
-#define F0900_P1_I2C_IRQVAL 0xf41c00f0
-#define F0900_P1_FLYWHEEL_CPT 0xf41c000f
-#define FLYWHEEL_CPT FLDx(F0900_P1_FLYWHEEL_CPT)
-
-/*P1_DSTATUS3*/
-#define R0900_P1_DSTATUS3 0xf41d
-#define DSTATUS3 REGx(R0900_P1_DSTATUS3)
-#define F0900_P1_DEMOD_CFGMODE 0xf41d0060
-
-/*P1_DMDCFG3*/
-#define R0900_P1_DMDCFG3 0xf41e
-#define DMDCFG3 REGx(R0900_P1_DMDCFG3)
-#define F0900_P1_NOSTOP_FIFOFULL 0xf41e0008
-
-/*P1_DMDCFG4*/
-#define R0900_P1_DMDCFG4 0xf41f
-#define DMDCFG4 REGx(R0900_P1_DMDCFG4)
-#define F0900_P1_TUNER_NRELAUNCH 0xf41f0008
-
-/*P1_CORRELMANT*/
-#define R0900_P1_CORRELMANT 0xf420
-#define CORRELMANT REGx(R0900_P1_CORRELMANT)
-#define F0900_P1_CORREL_MANT 0xf42000ff
-
-/*P1_CORRELABS*/
-#define R0900_P1_CORRELABS 0xf421
-#define CORRELABS REGx(R0900_P1_CORRELABS)
-#define F0900_P1_CORREL_ABS 0xf42100ff
-
-/*P1_CORRELEXP*/
-#define R0900_P1_CORRELEXP 0xf422
-#define CORRELEXP REGx(R0900_P1_CORRELEXP)
-#define F0900_P1_CORREL_ABSEXP 0xf42200f0
-#define F0900_P1_CORREL_EXP 0xf422000f
-
-/*P1_PLHMODCOD*/
-#define R0900_P1_PLHMODCOD 0xf424
-#define PLHMODCOD REGx(R0900_P1_PLHMODCOD)
-#define F0900_P1_SPECINV_DEMOD 0xf4240080
-#define SPECINV_DEMOD FLDx(F0900_P1_SPECINV_DEMOD)
-#define F0900_P1_PLH_MODCOD 0xf424007c
-#define F0900_P1_PLH_TYPE 0xf4240003
-
-/*P1_DMDREG*/
-#define R0900_P1_DMDREG 0xf425
-#define DMDREG REGx(R0900_P1_DMDREG)
-#define F0900_P1_DECIM_PLFRAMES 0xf4250001
-
-/*P1_AGC2O*/
-#define R0900_P1_AGC2O 0xf42c
-#define AGC2O REGx(R0900_P1_AGC2O)
-#define F0900_P1_AGC2_COEF 0xf42c0007
-
-/*P1_AGC2REF*/
-#define R0900_P1_AGC2REF 0xf42d
-#define AGC2REF REGx(R0900_P1_AGC2REF)
-#define F0900_P1_AGC2_REF 0xf42d00ff
-
-/*P1_AGC1ADJ*/
-#define R0900_P1_AGC1ADJ 0xf42e
-#define AGC1ADJ REGx(R0900_P1_AGC1ADJ)
-#define F0900_P1_AGC1_ADJUSTED 0xf42e007f
-
-/*P1_AGC2I1*/
-#define R0900_P1_AGC2I1 0xf436
-#define AGC2I1 REGx(R0900_P1_AGC2I1)
-#define F0900_P1_AGC2_INTEGRATOR1 0xf43600ff
-
-/*P1_AGC2I0*/
-#define R0900_P1_AGC2I0 0xf437
-#define AGC2I0 REGx(R0900_P1_AGC2I0)
-#define F0900_P1_AGC2_INTEGRATOR0 0xf43700ff
-
-/*P1_CARCFG*/
-#define R0900_P1_CARCFG 0xf438
-#define CARCFG REGx(R0900_P1_CARCFG)
-#define F0900_P1_CFRUPLOW_AUTO 0xf4380080
-#define F0900_P1_CFRUPLOW_TEST 0xf4380040
-#define F0900_P1_ROTAON 0xf4380004
-#define F0900_P1_PH_DET_ALGO 0xf4380003
-
-/*P1_ACLC*/
-#define R0900_P1_ACLC 0xf439
-#define ACLC REGx(R0900_P1_ACLC)
-#define F0900_P1_CAR_ALPHA_MANT 0xf4390030
-#define F0900_P1_CAR_ALPHA_EXP 0xf439000f
-
-/*P1_BCLC*/
-#define R0900_P1_BCLC 0xf43a
-#define BCLC REGx(R0900_P1_BCLC)
-#define F0900_P1_CAR_BETA_MANT 0xf43a0030
-#define F0900_P1_CAR_BETA_EXP 0xf43a000f
-
-/*P1_CARFREQ*/
-#define R0900_P1_CARFREQ 0xf43d
-#define CARFREQ REGx(R0900_P1_CARFREQ)
-#define F0900_P1_KC_COARSE_EXP 0xf43d00f0
-#define F0900_P1_BETA_FREQ 0xf43d000f
-
-/*P1_CARHDR*/
-#define R0900_P1_CARHDR 0xf43e
-#define CARHDR REGx(R0900_P1_CARHDR)
-#define F0900_P1_K_FREQ_HDR 0xf43e00ff
-
-/*P1_LDT*/
-#define R0900_P1_LDT 0xf43f
-#define LDT REGx(R0900_P1_LDT)
-#define F0900_P1_CARLOCK_THRES 0xf43f01ff
-
-/*P1_LDT2*/
-#define R0900_P1_LDT2 0xf440
-#define LDT2 REGx(R0900_P1_LDT2)
-#define F0900_P1_CARLOCK_THRES2 0xf44001ff
-
-/*P1_CFRICFG*/
-#define R0900_P1_CFRICFG 0xf441
-#define CFRICFG REGx(R0900_P1_CFRICFG)
-#define F0900_P1_NEG_CFRSTEP 0xf4410001
-
-/*P1_CFRUP1*/
-#define R0900_P1_CFRUP1 0xf442
-#define CFRUP1 REGx(R0900_P1_CFRUP1)
-#define F0900_P1_CFR_UP1 0xf44201ff
-#define CFR_UP1 FLDx(F0900_P1_CFR_UP1)
-
-/*P1_CFRUP0*/
-#define R0900_P1_CFRUP0 0xf443
-#define CFRUP0 REGx(R0900_P1_CFRUP0)
-#define F0900_P1_CFR_UP0 0xf44300ff
-#define CFR_UP0 FLDx(F0900_P1_CFR_UP0)
-
-/*P1_CFRLOW1*/
-#define R0900_P1_CFRLOW1 0xf446
-#define CFRLOW1 REGx(R0900_P1_CFRLOW1)
-#define F0900_P1_CFR_LOW1 0xf44601ff
-#define CFR_LOW1 FLDx(F0900_P1_CFR_LOW1)
-
-/*P1_CFRLOW0*/
-#define R0900_P1_CFRLOW0 0xf447
-#define CFRLOW0 REGx(R0900_P1_CFRLOW0)
-#define F0900_P1_CFR_LOW0 0xf44700ff
-#define CFR_LOW0 FLDx(F0900_P1_CFR_LOW0)
-
-/*P1_CFRINIT1*/
-#define R0900_P1_CFRINIT1 0xf448
-#define CFRINIT1 REGx(R0900_P1_CFRINIT1)
-#define F0900_P1_CFR_INIT1 0xf44801ff
-#define CFR_INIT1 FLDx(F0900_P1_CFR_INIT1)
-
-/*P1_CFRINIT0*/
-#define R0900_P1_CFRINIT0 0xf449
-#define CFRINIT0 REGx(R0900_P1_CFRINIT0)
-#define F0900_P1_CFR_INIT0 0xf44900ff
-#define CFR_INIT0 FLDx(F0900_P1_CFR_INIT0)
-
-/*P1_CFRINC1*/
-#define R0900_P1_CFRINC1 0xf44a
-#define CFRINC1 REGx(R0900_P1_CFRINC1)
-#define F0900_P1_MANUAL_CFRINC 0xf44a0080
-#define F0900_P1_CFR_INC1 0xf44a003f
-
-/*P1_CFRINC0*/
-#define R0900_P1_CFRINC0 0xf44b
-#define CFRINC0 REGx(R0900_P1_CFRINC0)
-#define F0900_P1_CFR_INC0 0xf44b00f8
-
-/*P1_CFR2*/
-#define R0900_P1_CFR2 0xf44c
-#define CFR2 REGx(R0900_P1_CFR2)
-#define F0900_P1_CAR_FREQ2 0xf44c01ff
-#define CAR_FREQ2 FLDx(F0900_P1_CAR_FREQ2)
-
-/*P1_CFR1*/
-#define R0900_P1_CFR1 0xf44d
-#define CFR1 REGx(R0900_P1_CFR1)
-#define F0900_P1_CAR_FREQ1 0xf44d00ff
-#define CAR_FREQ1 FLDx(F0900_P1_CAR_FREQ1)
-
-/*P1_CFR0*/
-#define R0900_P1_CFR0 0xf44e
-#define CFR0 REGx(R0900_P1_CFR0)
-#define F0900_P1_CAR_FREQ0 0xf44e00ff
-#define CAR_FREQ0 FLDx(F0900_P1_CAR_FREQ0)
-
-/*P1_LDI*/
-#define R0900_P1_LDI 0xf44f
-#define LDI REGx(R0900_P1_LDI)
-#define F0900_P1_LOCK_DET_INTEGR 0xf44f01ff
-
-/*P1_TMGCFG*/
-#define R0900_P1_TMGCFG 0xf450
-#define TMGCFG REGx(R0900_P1_TMGCFG)
-#define F0900_P1_TMGLOCK_BETA 0xf45000c0
-#define F0900_P1_DO_TIMING_CORR 0xf4500010
-#define F0900_P1_TMG_MINFREQ 0xf4500003
-
-/*P1_RTC*/
-#define R0900_P1_RTC 0xf451
-#define RTC REGx(R0900_P1_RTC)
-#define F0900_P1_TMGALPHA_EXP 0xf45100f0
-#define F0900_P1_TMGBETA_EXP 0xf451000f
-
-/*P1_RTCS2*/
-#define R0900_P1_RTCS2 0xf452
-#define RTCS2 REGx(R0900_P1_RTCS2)
-#define F0900_P1_TMGALPHAS2_EXP 0xf45200f0
-#define F0900_P1_TMGBETAS2_EXP 0xf452000f
-
-/*P1_TMGTHRISE*/
-#define R0900_P1_TMGTHRISE 0xf453
-#define TMGTHRISE REGx(R0900_P1_TMGTHRISE)
-#define F0900_P1_TMGLOCK_THRISE 0xf45300ff
-
-/*P1_TMGTHFALL*/
-#define R0900_P1_TMGTHFALL 0xf454
-#define TMGTHFALL REGx(R0900_P1_TMGTHFALL)
-#define F0900_P1_TMGLOCK_THFALL 0xf45400ff
-
-/*P1_SFRUPRATIO*/
-#define R0900_P1_SFRUPRATIO 0xf455
-#define SFRUPRATIO REGx(R0900_P1_SFRUPRATIO)
-#define F0900_P1_SFR_UPRATIO 0xf45500ff
-
-/*P1_SFRLOWRATIO*/
-#define R0900_P1_SFRLOWRATIO 0xf456
-#define F0900_P1_SFR_LOWRATIO 0xf45600ff
-
-/*P1_KREFTMG*/
-#define R0900_P1_KREFTMG 0xf458
-#define KREFTMG REGx(R0900_P1_KREFTMG)
-#define F0900_P1_KREF_TMG 0xf45800ff
-
-/*P1_SFRSTEP*/
-#define R0900_P1_SFRSTEP 0xf459
-#define SFRSTEP REGx(R0900_P1_SFRSTEP)
-#define F0900_P1_SFR_SCANSTEP 0xf45900f0
-#define F0900_P1_SFR_CENTERSTEP 0xf459000f
-
-/*P1_TMGCFG2*/
-#define R0900_P1_TMGCFG2 0xf45a
-#define TMGCFG2 REGx(R0900_P1_TMGCFG2)
-#define F0900_P1_SFRRATIO_FINE 0xf45a0001
-
-/*P1_KREFTMG2*/
-#define R0900_P1_KREFTMG2 0xf45b
-#define KREFTMG2 REGx(R0900_P1_KREFTMG2)
-#define F0900_P1_KREF_TMG2 0xf45b00ff
-
-/*P1_SFRINIT1*/
-#define R0900_P1_SFRINIT1 0xf45e
-#define SFRINIT1 REGx(R0900_P1_SFRINIT1)
-#define F0900_P1_SFR_INIT1 0xf45e007f
-
-/*P1_SFRINIT0*/
-#define R0900_P1_SFRINIT0 0xf45f
-#define SFRINIT0 REGx(R0900_P1_SFRINIT0)
-#define F0900_P1_SFR_INIT0 0xf45f00ff
-
-/*P1_SFRUP1*/
-#define R0900_P1_SFRUP1 0xf460
-#define SFRUP1 REGx(R0900_P1_SFRUP1)
-#define F0900_P1_AUTO_GUP 0xf4600080
-#define AUTO_GUP FLDx(F0900_P1_AUTO_GUP)
-#define F0900_P1_SYMB_FREQ_UP1 0xf460007f
-
-/*P1_SFRUP0*/
-#define R0900_P1_SFRUP0 0xf461
-#define SFRUP0 REGx(R0900_P1_SFRUP0)
-#define F0900_P1_SYMB_FREQ_UP0 0xf46100ff
-
-/*P1_SFRLOW1*/
-#define R0900_P1_SFRLOW1 0xf462
-#define SFRLOW1 REGx(R0900_P1_SFRLOW1)
-#define F0900_P1_AUTO_GLOW 0xf4620080
-#define AUTO_GLOW FLDx(F0900_P1_AUTO_GLOW)
-#define F0900_P1_SYMB_FREQ_LOW1 0xf462007f
-
-/*P1_SFRLOW0*/
-#define R0900_P1_SFRLOW0 0xf463
-#define SFRLOW0 REGx(R0900_P1_SFRLOW0)
-#define F0900_P1_SYMB_FREQ_LOW0 0xf46300ff
-
-/*P1_SFR3*/
-#define R0900_P1_SFR3 0xf464
-#define SFR3 REGx(R0900_P1_SFR3)
-#define F0900_P1_SYMB_FREQ3 0xf46400ff
-#define SYMB_FREQ3 FLDx(F0900_P1_SYMB_FREQ3)
-
-/*P1_SFR2*/
-#define R0900_P1_SFR2 0xf465
-#define SFR2 REGx(R0900_P1_SFR2)
-#define F0900_P1_SYMB_FREQ2 0xf46500ff
-#define SYMB_FREQ2 FLDx(F0900_P1_SYMB_FREQ2)
-
-/*P1_SFR1*/
-#define R0900_P1_SFR1 0xf466
-#define SFR1 REGx(R0900_P1_SFR1)
-#define F0900_P1_SYMB_FREQ1 0xf46600ff
-#define SYMB_FREQ1 FLDx(F0900_P1_SYMB_FREQ1)
-
-/*P1_SFR0*/
-#define R0900_P1_SFR0 0xf467
-#define SFR0 REGx(R0900_P1_SFR0)
-#define F0900_P1_SYMB_FREQ0 0xf46700ff
-#define SYMB_FREQ0 FLDx(F0900_P1_SYMB_FREQ0)
-
-/*P1_TMGREG2*/
-#define R0900_P1_TMGREG2 0xf468
-#define TMGREG2 REGx(R0900_P1_TMGREG2)
-#define F0900_P1_TMGREG2 0xf46800ff
-
-/*P1_TMGREG1*/
-#define R0900_P1_TMGREG1 0xf469
-#define TMGREG1 REGx(R0900_P1_TMGREG1)
-#define F0900_P1_TMGREG1 0xf46900ff
-
-/*P1_TMGREG0*/
-#define R0900_P1_TMGREG0 0xf46a
-#define TMGREG0 REGx(R0900_P1_TMGREG0)
-#define F0900_P1_TMGREG0 0xf46a00ff
-
-/*P1_TMGLOCK1*/
-#define R0900_P1_TMGLOCK1 0xf46b
-#define TMGLOCK1 REGx(R0900_P1_TMGLOCK1)
-#define F0900_P1_TMGLOCK_LEVEL1 0xf46b01ff
-
-/*P1_TMGLOCK0*/
-#define R0900_P1_TMGLOCK0 0xf46c
-#define TMGLOCK0 REGx(R0900_P1_TMGLOCK0)
-#define F0900_P1_TMGLOCK_LEVEL0 0xf46c00ff
-
-/*P1_TMGOBS*/
-#define R0900_P1_TMGOBS 0xf46d
-#define TMGOBS REGx(R0900_P1_TMGOBS)
-#define F0900_P1_ROLLOFF_STATUS 0xf46d00c0
-#define ROLLOFF_STATUS FLDx(F0900_P1_ROLLOFF_STATUS)
-
-/*P1_EQUALCFG*/
-#define R0900_P1_EQUALCFG 0xf46f
-#define EQUALCFG REGx(R0900_P1_EQUALCFG)
-#define F0900_P1_EQUAL_ON 0xf46f0040
-#define F0900_P1_MU_EQUALDFE 0xf46f0007
-
-/*P1_EQUAI1*/
-#define R0900_P1_EQUAI1 0xf470
-#define EQUAI1 REGx(R0900_P1_EQUAI1)
-#define F0900_P1_EQUA_ACCI1 0xf47001ff
-
-/*P1_EQUAQ1*/
-#define R0900_P1_EQUAQ1 0xf471
-#define EQUAQ1 REGx(R0900_P1_EQUAQ1)
-#define F0900_P1_EQUA_ACCQ1 0xf47101ff
-
-/*P1_EQUAI2*/
-#define R0900_P1_EQUAI2 0xf472
-#define EQUAI2 REGx(R0900_P1_EQUAI2)
-#define F0900_P1_EQUA_ACCI2 0xf47201ff
-
-/*P1_EQUAQ2*/
-#define R0900_P1_EQUAQ2 0xf473
-#define EQUAQ2 REGx(R0900_P1_EQUAQ2)
-#define F0900_P1_EQUA_ACCQ2 0xf47301ff
-
-/*P1_EQUAI3*/
-#define R0900_P1_EQUAI3 0xf474
-#define EQUAI3 REGx(R0900_P1_EQUAI3)
-#define F0900_P1_EQUA_ACCI3 0xf47401ff
-
-/*P1_EQUAQ3*/
-#define R0900_P1_EQUAQ3 0xf475
-#define EQUAQ3 REGx(R0900_P1_EQUAQ3)
-#define F0900_P1_EQUA_ACCQ3 0xf47501ff
-
-/*P1_EQUAI4*/
-#define R0900_P1_EQUAI4 0xf476
-#define EQUAI4 REGx(R0900_P1_EQUAI4)
-#define F0900_P1_EQUA_ACCI4 0xf47601ff
-
-/*P1_EQUAQ4*/
-#define R0900_P1_EQUAQ4 0xf477
-#define EQUAQ4 REGx(R0900_P1_EQUAQ4)
-#define F0900_P1_EQUA_ACCQ4 0xf47701ff
-
-/*P1_EQUAI5*/
-#define R0900_P1_EQUAI5 0xf478
-#define EQUAI5 REGx(R0900_P1_EQUAI5)
-#define F0900_P1_EQUA_ACCI5 0xf47801ff
-
-/*P1_EQUAQ5*/
-#define R0900_P1_EQUAQ5 0xf479
-#define EQUAQ5 REGx(R0900_P1_EQUAQ5)
-#define F0900_P1_EQUA_ACCQ5 0xf47901ff
-
-/*P1_EQUAI6*/
-#define R0900_P1_EQUAI6 0xf47a
-#define EQUAI6 REGx(R0900_P1_EQUAI6)
-#define F0900_P1_EQUA_ACCI6 0xf47a01ff
-
-/*P1_EQUAQ6*/
-#define R0900_P1_EQUAQ6 0xf47b
-#define EQUAQ6 REGx(R0900_P1_EQUAQ6)
-#define F0900_P1_EQUA_ACCQ6 0xf47b01ff
-
-/*P1_EQUAI7*/
-#define R0900_P1_EQUAI7 0xf47c
-#define EQUAI7 REGx(R0900_P1_EQUAI7)
-#define F0900_P1_EQUA_ACCI7 0xf47c01ff
-
-/*P1_EQUAQ7*/
-#define R0900_P1_EQUAQ7 0xf47d
-#define EQUAQ7 REGx(R0900_P1_EQUAQ7)
-#define F0900_P1_EQUA_ACCQ7 0xf47d01ff
-
-/*P1_EQUAI8*/
-#define R0900_P1_EQUAI8 0xf47e
-#define EQUAI8 REGx(R0900_P1_EQUAI8)
-#define F0900_P1_EQUA_ACCI8 0xf47e01ff
-
-/*P1_EQUAQ8*/
-#define R0900_P1_EQUAQ8 0xf47f
-#define EQUAQ8 REGx(R0900_P1_EQUAQ8)
-#define F0900_P1_EQUA_ACCQ8 0xf47f01ff
-
-/*P1_NNOSDATAT1*/
-#define R0900_P1_NNOSDATAT1 0xf480
-#define NNOSDATAT1 REGx(R0900_P1_NNOSDATAT1)
-#define F0900_P1_NOSDATAT_NORMED1 0xf48000ff
-#define NOSDATAT_NORMED1 FLDx(F0900_P1_NOSDATAT_NORMED1)
-
-/*P1_NNOSDATAT0*/
-#define R0900_P1_NNOSDATAT0 0xf481
-#define NNOSDATAT0 REGx(R0900_P1_NNOSDATAT0)
-#define F0900_P1_NOSDATAT_NORMED0 0xf48100ff
-#define NOSDATAT_NORMED0 FLDx(F0900_P1_NOSDATAT_NORMED0)
-
-/*P1_NNOSDATA1*/
-#define R0900_P1_NNOSDATA1 0xf482
-#define NNOSDATA1 REGx(R0900_P1_NNOSDATA1)
-#define F0900_P1_NOSDATA_NORMED1 0xf48200ff
-
-/*P1_NNOSDATA0*/
-#define R0900_P1_NNOSDATA0 0xf483
-#define NNOSDATA0 REGx(R0900_P1_NNOSDATA0)
-#define F0900_P1_NOSDATA_NORMED0 0xf48300ff
-
-/*P1_NNOSPLHT1*/
-#define R0900_P1_NNOSPLHT1 0xf484
-#define NNOSPLHT1 REGx(R0900_P1_NNOSPLHT1)
-#define F0900_P1_NOSPLHT_NORMED1 0xf48400ff
-#define NOSPLHT_NORMED1 FLDx(F0900_P1_NOSPLHT_NORMED1)
-
-/*P1_NNOSPLHT0*/
-#define R0900_P1_NNOSPLHT0 0xf485
-#define NNOSPLHT0 REGx(R0900_P1_NNOSPLHT0)
-#define F0900_P1_NOSPLHT_NORMED0 0xf48500ff
-#define NOSPLHT_NORMED0 FLDx(F0900_P1_NOSPLHT_NORMED0)
-
-/*P1_NNOSPLH1*/
-#define R0900_P1_NNOSPLH1 0xf486
-#define NNOSPLH1 REGx(R0900_P1_NNOSPLH1)
-#define F0900_P1_NOSPLH_NORMED1 0xf48600ff
-
-/*P1_NNOSPLH0*/
-#define R0900_P1_NNOSPLH0 0xf487
-#define NNOSPLH0 REGx(R0900_P1_NNOSPLH0)
-#define F0900_P1_NOSPLH_NORMED0 0xf48700ff
-
-/*P1_NOSDATAT1*/
-#define R0900_P1_NOSDATAT1 0xf488
-#define NOSDATAT1 REGx(R0900_P1_NOSDATAT1)
-#define F0900_P1_NOSDATAT_UNNORMED1 0xf48800ff
-
-/*P1_NOSDATAT0*/
-#define R0900_P1_NOSDATAT0 0xf489
-#define NOSDATAT0 REGx(R0900_P1_NOSDATAT0)
-#define F0900_P1_NOSDATAT_UNNORMED0 0xf48900ff
-
-/*P1_NOSDATA1*/
-#define R0900_P1_NOSDATA1 0xf48a
-#define NOSDATA1 REGx(R0900_P1_NOSDATA1)
-#define F0900_P1_NOSDATA_UNNORMED1 0xf48a00ff
-
-/*P1_NOSDATA0*/
-#define R0900_P1_NOSDATA0 0xf48b
-#define NOSDATA0 REGx(R0900_P1_NOSDATA0)
-#define F0900_P1_NOSDATA_UNNORMED0 0xf48b00ff
-
-/*P1_NOSPLHT1*/
-#define R0900_P1_NOSPLHT1 0xf48c
-#define NOSPLHT1 REGx(R0900_P1_NOSPLHT1)
-#define F0900_P1_NOSPLHT_UNNORMED1 0xf48c00ff
-
-/*P1_NOSPLHT0*/
-#define R0900_P1_NOSPLHT0 0xf48d
-#define NOSPLHT0 REGx(R0900_P1_NOSPLHT0)
-#define F0900_P1_NOSPLHT_UNNORMED0 0xf48d00ff
-
-/*P1_NOSPLH1*/
-#define R0900_P1_NOSPLH1 0xf48e
-#define NOSPLH1 REGx(R0900_P1_NOSPLH1)
-#define F0900_P1_NOSPLH_UNNORMED1 0xf48e00ff
-
-/*P1_NOSPLH0*/
-#define R0900_P1_NOSPLH0 0xf48f
-#define NOSPLH0 REGx(R0900_P1_NOSPLH0)
-#define F0900_P1_NOSPLH_UNNORMED0 0xf48f00ff
-
-/*P1_CAR2CFG*/
-#define R0900_P1_CAR2CFG 0xf490
-#define CAR2CFG REGx(R0900_P1_CAR2CFG)
-#define F0900_P1_CARRIER3_DISABLE 0xf4900040
-#define F0900_P1_ROTA2ON 0xf4900004
-#define F0900_P1_PH_DET_ALGO2 0xf4900003
-
-/*P1_CFR2CFR1*/
-#define R0900_P1_CFR2CFR1 0xf491
-#define CFR2CFR1 REGx(R0900_P1_CFR2CFR1)
-#define F0900_P1_CFR2TOCFR1_DVBS1 0xf49100c0
-#define F0900_P1_EN_S2CAR2CENTER 0xf4910020
-#define F0900_P1_DIS_BCHERRCFR2 0xf4910010
-#define F0900_P1_CFR2TOCFR1_BETA 0xf4910007
-
-/*P1_CFR22*/
-#define R0900_P1_CFR22 0xf493
-#define CFR22 REGx(R0900_P1_CFR22)
-#define F0900_P1_CAR2_FREQ2 0xf49301ff
-
-/*P1_CFR21*/
-#define R0900_P1_CFR21 0xf494
-#define CFR21 REGx(R0900_P1_CFR21)
-#define F0900_P1_CAR2_FREQ1 0xf49400ff
-
-/*P1_CFR20*/
-#define R0900_P1_CFR20 0xf495
-#define CFR20 REGx(R0900_P1_CFR20)
-#define F0900_P1_CAR2_FREQ0 0xf49500ff
-
-/*P1_ACLC2S2Q*/
-#define R0900_P1_ACLC2S2Q 0xf497
-#define ACLC2S2Q REGx(R0900_P1_ACLC2S2Q)
-#define F0900_P1_ENAB_SPSKSYMB 0xf4970080
-#define F0900_P1_CAR2S2_Q_ALPH_M 0xf4970030
-#define F0900_P1_CAR2S2_Q_ALPH_E 0xf497000f
-
-/*P1_ACLC2S28*/
-#define R0900_P1_ACLC2S28 0xf498
-#define ACLC2S28 REGx(R0900_P1_ACLC2S28)
-#define F0900_P1_OLDI3Q_MODE 0xf4980080
-#define F0900_P1_CAR2S2_8_ALPH_M 0xf4980030
-#define F0900_P1_CAR2S2_8_ALPH_E 0xf498000f
-
-/*P1_ACLC2S216A*/
-#define R0900_P1_ACLC2S216A 0xf499
-#define ACLC2S216A REGx(R0900_P1_ACLC2S216A)
-#define F0900_P1_DIS_C3STOPA2 0xf4990080
-#define F0900_P1_CAR2S2_16ADERAT 0xf4990040
-#define F0900_P1_CAR2S2_16A_ALPH_M 0xf4990030
-#define F0900_P1_CAR2S2_16A_ALPH_E 0xf499000f
-
-/*P1_ACLC2S232A*/
-#define R0900_P1_ACLC2S232A 0xf49a
-#define ACLC2S232A REGx(R0900_P1_ACLC2S232A)
-#define F0900_P1_CAR2S2_32ADERAT 0xf49a0040
-#define F0900_P1_CAR2S2_32A_ALPH_M 0xf49a0030
-#define F0900_P1_CAR2S2_32A_ALPH_E 0xf49a000f
-
-/*P1_BCLC2S2Q*/
-#define R0900_P1_BCLC2S2Q 0xf49c
-#define BCLC2S2Q REGx(R0900_P1_BCLC2S2Q)
-#define F0900_P1_CAR2S2_Q_BETA_M 0xf49c0030
-#define F0900_P1_CAR2S2_Q_BETA_E 0xf49c000f
-
-/*P1_BCLC2S28*/
-#define R0900_P1_BCLC2S28 0xf49d
-#define BCLC2S28 REGx(R0900_P1_BCLC2S28)
-#define F0900_P1_CAR2S2_8_BETA_M 0xf49d0030
-#define F0900_P1_CAR2S2_8_BETA_E 0xf49d000f
-
-/*P1_BCLC2S216A*/
-#define R0900_P1_BCLC2S216A 0xf49e
-#define BCLC2S216A REGx(R0900_P1_BCLC2S216A)
-
-/*P1_BCLC2S232A*/
-#define R0900_P1_BCLC2S232A 0xf49f
-#define BCLC2S232A REGx(R0900_P1_BCLC2S232A)
-
-/*P1_PLROOT2*/
-#define R0900_P1_PLROOT2 0xf4ac
-#define PLROOT2 REGx(R0900_P1_PLROOT2)
-#define F0900_P1_PLSCRAMB_MODE 0xf4ac000c
-#define F0900_P1_PLSCRAMB_ROOT2 0xf4ac0003
-
-/*P1_PLROOT1*/
-#define R0900_P1_PLROOT1 0xf4ad
-#define PLROOT1 REGx(R0900_P1_PLROOT1)
-#define F0900_P1_PLSCRAMB_ROOT1 0xf4ad00ff
-
-/*P1_PLROOT0*/
-#define R0900_P1_PLROOT0 0xf4ae
-#define PLROOT0 REGx(R0900_P1_PLROOT0)
-#define F0900_P1_PLSCRAMB_ROOT0 0xf4ae00ff
-
-/*P1_MODCODLST0*/
-#define R0900_P1_MODCODLST0 0xf4b0
-#define MODCODLST0 REGx(R0900_P1_MODCODLST0)
-
-/*P1_MODCODLST1*/
-#define R0900_P1_MODCODLST1 0xf4b1
-#define MODCODLST1 REGx(R0900_P1_MODCODLST1)
-#define F0900_P1_DIS_MODCOD29 0xf4b100f0
-#define F0900_P1_DIS_32PSK_9_10 0xf4b1000f
-
-/*P1_MODCODLST2*/
-#define R0900_P1_MODCODLST2 0xf4b2
-#define MODCODLST2 REGx(R0900_P1_MODCODLST2)
-#define F0900_P1_DIS_32PSK_8_9 0xf4b200f0
-#define F0900_P1_DIS_32PSK_5_6 0xf4b2000f
-
-/*P1_MODCODLST3*/
-#define R0900_P1_MODCODLST3 0xf4b3
-#define MODCODLST3 REGx(R0900_P1_MODCODLST3)
-#define F0900_P1_DIS_32PSK_4_5 0xf4b300f0
-#define F0900_P1_DIS_32PSK_3_4 0xf4b3000f
-
-/*P1_MODCODLST4*/
-#define R0900_P1_MODCODLST4 0xf4b4
-#define MODCODLST4 REGx(R0900_P1_MODCODLST4)
-#define F0900_P1_DIS_16PSK_9_10 0xf4b400f0
-#define F0900_P1_DIS_16PSK_8_9 0xf4b4000f
-
-/*P1_MODCODLST5*/
-#define R0900_P1_MODCODLST5 0xf4b5
-#define MODCODLST5 REGx(R0900_P1_MODCODLST5)
-#define F0900_P1_DIS_16PSK_5_6 0xf4b500f0
-#define F0900_P1_DIS_16PSK_4_5 0xf4b5000f
-
-/*P1_MODCODLST6*/
-#define R0900_P1_MODCODLST6 0xf4b6
-#define MODCODLST6 REGx(R0900_P1_MODCODLST6)
-#define F0900_P1_DIS_16PSK_3_4 0xf4b600f0
-#define F0900_P1_DIS_16PSK_2_3 0xf4b6000f
-
-/*P1_MODCODLST7*/
-#define R0900_P1_MODCODLST7 0xf4b7
-#define MODCODLST7 REGx(R0900_P1_MODCODLST7)
-#define F0900_P1_DIS_8P_9_10 0xf4b700f0
-#define F0900_P1_DIS_8P_8_9 0xf4b7000f
-
-/*P1_MODCODLST8*/
-#define R0900_P1_MODCODLST8 0xf4b8
-#define MODCODLST8 REGx(R0900_P1_MODCODLST8)
-#define F0900_P1_DIS_8P_5_6 0xf4b800f0
-#define F0900_P1_DIS_8P_3_4 0xf4b8000f
-
-/*P1_MODCODLST9*/
-#define R0900_P1_MODCODLST9 0xf4b9
-#define MODCODLST9 REGx(R0900_P1_MODCODLST9)
-#define F0900_P1_DIS_8P_2_3 0xf4b900f0
-#define F0900_P1_DIS_8P_3_5 0xf4b9000f
-
-/*P1_MODCODLSTA*/
-#define R0900_P1_MODCODLSTA 0xf4ba
-#define MODCODLSTA REGx(R0900_P1_MODCODLSTA)
-#define F0900_P1_DIS_QP_9_10 0xf4ba00f0
-#define F0900_P1_DIS_QP_8_9 0xf4ba000f
-
-/*P1_MODCODLSTB*/
-#define R0900_P1_MODCODLSTB 0xf4bb
-#define MODCODLSTB REGx(R0900_P1_MODCODLSTB)
-#define F0900_P1_DIS_QP_5_6 0xf4bb00f0
-#define F0900_P1_DIS_QP_4_5 0xf4bb000f
-
-/*P1_MODCODLSTC*/
-#define R0900_P1_MODCODLSTC 0xf4bc
-#define MODCODLSTC REGx(R0900_P1_MODCODLSTC)
-#define F0900_P1_DIS_QP_3_4 0xf4bc00f0
-#define F0900_P1_DIS_QP_2_3 0xf4bc000f
-
-/*P1_MODCODLSTD*/
-#define R0900_P1_MODCODLSTD 0xf4bd
-#define MODCODLSTD REGx(R0900_P1_MODCODLSTD)
-#define F0900_P1_DIS_QP_3_5 0xf4bd00f0
-#define F0900_P1_DIS_QP_1_2 0xf4bd000f
-
-/*P1_MODCODLSTE*/
-#define R0900_P1_MODCODLSTE 0xf4be
-#define MODCODLSTE REGx(R0900_P1_MODCODLSTE)
-#define F0900_P1_DIS_QP_2_5 0xf4be00f0
-#define F0900_P1_DIS_QP_1_3 0xf4be000f
-
-/*P1_MODCODLSTF*/
-#define R0900_P1_MODCODLSTF 0xf4bf
-#define MODCODLSTF REGx(R0900_P1_MODCODLSTF)
-#define F0900_P1_DIS_QP_1_4 0xf4bf00f0
-
-/*P1_GAUSSR0*/
-#define R0900_P1_GAUSSR0 0xf4c0
-#define GAUSSR0 REGx(R0900_P1_GAUSSR0)
-#define F0900_P1_EN_CCIMODE 0xf4c00080
-#define F0900_P1_R0_GAUSSIEN 0xf4c0007f
-
-/*P1_CCIR0*/
-#define R0900_P1_CCIR0 0xf4c1
-#define CCIR0 REGx(R0900_P1_CCIR0)
-#define F0900_P1_CCIDETECT_PLHONLY 0xf4c10080
-#define F0900_P1_R0_CCI 0xf4c1007f
-
-/*P1_CCIQUANT*/
-#define R0900_P1_CCIQUANT 0xf4c2
-#define CCIQUANT REGx(R0900_P1_CCIQUANT)
-#define F0900_P1_CCI_BETA 0xf4c200e0
-#define F0900_P1_CCI_QUANT 0xf4c2001f
-
-/*P1_CCITHRES*/
-#define R0900_P1_CCITHRES 0xf4c3
-#define CCITHRES REGx(R0900_P1_CCITHRES)
-#define F0900_P1_CCI_THRESHOLD 0xf4c300ff
-
-/*P1_CCIACC*/
-#define R0900_P1_CCIACC 0xf4c4
-#define CCIACC REGx(R0900_P1_CCIACC)
-#define F0900_P1_CCI_VALUE 0xf4c400ff
-
-/*P1_DMDRESCFG*/
-#define R0900_P1_DMDRESCFG 0xf4c6
-#define DMDRESCFG REGx(R0900_P1_DMDRESCFG)
-#define F0900_P1_DMDRES_RESET 0xf4c60080
-#define F0900_P1_DMDRES_STRALL 0xf4c60008
-#define F0900_P1_DMDRES_NEWONLY 0xf4c60004
-#define F0900_P1_DMDRES_NOSTORE 0xf4c60002
-
-/*P1_DMDRESADR*/
-#define R0900_P1_DMDRESADR 0xf4c7
-#define DMDRESADR REGx(R0900_P1_DMDRESADR)
-#define F0900_P1_DMDRES_VALIDCFR 0xf4c70040
-#define F0900_P1_DMDRES_MEMFULL 0xf4c70030
-#define F0900_P1_DMDRES_RESNBR 0xf4c7000f
-
-/*P1_DMDRESDATA7*/
-#define R0900_P1_DMDRESDATA7 0xf4c8
-#define F0900_P1_DMDRES_DATA7 0xf4c800ff
-
-/*P1_DMDRESDATA6*/
-#define R0900_P1_DMDRESDATA6 0xf4c9
-#define F0900_P1_DMDRES_DATA6 0xf4c900ff
-
-/*P1_DMDRESDATA5*/
-#define R0900_P1_DMDRESDATA5 0xf4ca
-#define F0900_P1_DMDRES_DATA5 0xf4ca00ff
-
-/*P1_DMDRESDATA4*/
-#define R0900_P1_DMDRESDATA4 0xf4cb
-#define F0900_P1_DMDRES_DATA4 0xf4cb00ff
-
-/*P1_DMDRESDATA3*/
-#define R0900_P1_DMDRESDATA3 0xf4cc
-#define F0900_P1_DMDRES_DATA3 0xf4cc00ff
-
-/*P1_DMDRESDATA2*/
-#define R0900_P1_DMDRESDATA2 0xf4cd
-#define F0900_P1_DMDRES_DATA2 0xf4cd00ff
-
-/*P1_DMDRESDATA1*/
-#define R0900_P1_DMDRESDATA1 0xf4ce
-#define F0900_P1_DMDRES_DATA1 0xf4ce00ff
-
-/*P1_DMDRESDATA0*/
-#define R0900_P1_DMDRESDATA0 0xf4cf
-#define F0900_P1_DMDRES_DATA0 0xf4cf00ff
-
-/*P1_FFEI1*/
-#define R0900_P1_FFEI1 0xf4d0
-#define FFEI1 REGx(R0900_P1_FFEI1)
-#define F0900_P1_FFE_ACCI1 0xf4d001ff
-
-/*P1_FFEQ1*/
-#define R0900_P1_FFEQ1 0xf4d1
-#define FFEQ1 REGx(R0900_P1_FFEQ1)
-#define F0900_P1_FFE_ACCQ1 0xf4d101ff
-
-/*P1_FFEI2*/
-#define R0900_P1_FFEI2 0xf4d2
-#define FFEI2 REGx(R0900_P1_FFEI2)
-#define F0900_P1_FFE_ACCI2 0xf4d201ff
-
-/*P1_FFEQ2*/
-#define R0900_P1_FFEQ2 0xf4d3
-#define FFEQ2 REGx(R0900_P1_FFEQ2)
-#define F0900_P1_FFE_ACCQ2 0xf4d301ff
-
-/*P1_FFEI3*/
-#define R0900_P1_FFEI3 0xf4d4
-#define FFEI3 REGx(R0900_P1_FFEI3)
-#define F0900_P1_FFE_ACCI3 0xf4d401ff
-
-/*P1_FFEQ3*/
-#define R0900_P1_FFEQ3 0xf4d5
-#define FFEQ3 REGx(R0900_P1_FFEQ3)
-#define F0900_P1_FFE_ACCQ3 0xf4d501ff
-
-/*P1_FFEI4*/
-#define R0900_P1_FFEI4 0xf4d6
-#define FFEI4 REGx(R0900_P1_FFEI4)
-#define F0900_P1_FFE_ACCI4 0xf4d601ff
-
-/*P1_FFEQ4*/
-#define R0900_P1_FFEQ4 0xf4d7
-#define FFEQ4 REGx(R0900_P1_FFEQ4)
-#define F0900_P1_FFE_ACCQ4 0xf4d701ff
-
-/*P1_FFECFG*/
-#define R0900_P1_FFECFG 0xf4d8
-#define FFECFG REGx(R0900_P1_FFECFG)
-#define F0900_P1_EQUALFFE_ON 0xf4d80040
-#define F0900_P1_MU_EQUALFFE 0xf4d80007
-
-/*P1_TNRCFG*/
-#define R0900_P1_TNRCFG 0xf4e0
-#define TNRCFG REGx(R0900_P1_TNRCFG)
-#define F0900_P1_TUN_ACKFAIL 0xf4e00080
-#define F0900_P1_TUN_TYPE 0xf4e00070
-#define F0900_P1_TUN_SECSTOP 0xf4e00008
-#define F0900_P1_TUN_VCOSRCH 0xf4e00004
-#define F0900_P1_TUN_MADDRESS 0xf4e00003
-
-/*P1_TNRCFG2*/
-#define R0900_P1_TNRCFG2 0xf4e1
-#define TNRCFG2 REGx(R0900_P1_TNRCFG2)
-#define F0900_P1_TUN_IQSWAP 0xf4e10080
-#define F0900_P1_DIS_BWCALC 0xf4e10004
-#define F0900_P1_SHORT_WAITSTATES 0xf4e10002
-
-/*P1_TNRXTAL*/
-#define R0900_P1_TNRXTAL 0xf4e4
-#define TNRXTAL REGx(R0900_P1_TNRXTAL)
-#define F0900_P1_TUN_XTALFREQ 0xf4e4001f
-
-/*P1_TNRSTEPS*/
-#define R0900_P1_TNRSTEPS 0xf4e7
-#define TNRSTEPS REGx(R0900_P1_TNRSTEPS)
-#define F0900_P1_TUNER_BW0P125 0xf4e70080
-#define F0900_P1_BWINC_OFFSET 0xf4e70170
-#define F0900_P1_SOFTSTEP_RNG 0xf4e70008
-#define F0900_P1_TUN_BWOFFSET 0xf4e70007
-
-/*P1_TNRGAIN*/
-#define R0900_P1_TNRGAIN 0xf4e8
-#define TNRGAIN REGx(R0900_P1_TNRGAIN)
-#define F0900_P1_TUN_KDIVEN 0xf4e800c0
-#define F0900_P1_STB6X00_OCK 0xf4e80030
-#define F0900_P1_TUN_GAIN 0xf4e8000f
-
-/*P1_TNRRF1*/
-#define R0900_P1_TNRRF1 0xf4e9
-#define TNRRF1 REGx(R0900_P1_TNRRF1)
-#define F0900_P1_TUN_RFFREQ2 0xf4e900ff
-#define TUN_RFFREQ2 FLDx(F0900_P1_TUN_RFFREQ2)
-
-/*P1_TNRRF0*/
-#define R0900_P1_TNRRF0 0xf4ea
-#define TNRRF0 REGx(R0900_P1_TNRRF0)
-#define F0900_P1_TUN_RFFREQ1 0xf4ea00ff
-#define TUN_RFFREQ1 FLDx(F0900_P1_TUN_RFFREQ1)
-
-/*P1_TNRBW*/
-#define R0900_P1_TNRBW 0xf4eb
-#define TNRBW REGx(R0900_P1_TNRBW)
-#define F0900_P1_TUN_RFFREQ0 0xf4eb00c0
-#define TUN_RFFREQ0 FLDx(F0900_P1_TUN_RFFREQ0)
-#define F0900_P1_TUN_BW 0xf4eb003f
-#define TUN_BW FLDx(F0900_P1_TUN_BW)
-
-/*P1_TNRADJ*/
-#define R0900_P1_TNRADJ 0xf4ec
-#define TNRADJ REGx(R0900_P1_TNRADJ)
-#define F0900_P1_STB61X0_CALTIME 0xf4ec0040
-
-/*P1_TNRCTL2*/
-#define R0900_P1_TNRCTL2 0xf4ed
-#define TNRCTL2 REGx(R0900_P1_TNRCTL2)
-#define F0900_P1_STB61X0_RCCKOFF 0xf4ed0080
-#define F0900_P1_STB61X0_ICP_SDOFF 0xf4ed0040
-#define F0900_P1_STB61X0_DCLOOPOFF 0xf4ed0020
-#define F0900_P1_STB61X0_REFOUTSEL 0xf4ed0010
-#define F0900_P1_STB61X0_CALOFF 0xf4ed0008
-#define F0900_P1_STB6XX0_LPT_BEN 0xf4ed0004
-#define F0900_P1_STB6XX0_RX_OSCP 0xf4ed0002
-#define F0900_P1_STB6XX0_SYN 0xf4ed0001
-
-/*P1_TNRCFG3*/
-#define R0900_P1_TNRCFG3 0xf4ee
-#define TNRCFG3 REGx(R0900_P1_TNRCFG3)
-#define F0900_P1_TUN_PLLFREQ 0xf4ee001c
-#define F0900_P1_TUN_I2CFREQ_MODE 0xf4ee0003
-
-/*P1_TNRLAUNCH*/
-#define R0900_P1_TNRLAUNCH 0xf4f0
-#define TNRLAUNCH REGx(R0900_P1_TNRLAUNCH)
-
-/*P1_TNRLD*/
-#define R0900_P1_TNRLD 0xf4f0
-#define TNRLD REGx(R0900_P1_TNRLD)
-#define F0900_P1_TUNLD_VCOING 0xf4f00080
-#define F0900_P1_TUN_REG1FAIL 0xf4f00040
-#define F0900_P1_TUN_REG2FAIL 0xf4f00020
-#define F0900_P1_TUN_REG3FAIL 0xf4f00010
-#define F0900_P1_TUN_REG4FAIL 0xf4f00008
-#define F0900_P1_TUN_REG5FAIL 0xf4f00004
-#define F0900_P1_TUN_BWING 0xf4f00002
-#define F0900_P1_TUN_LOCKED 0xf4f00001
-
-/*P1_TNROBSL*/
-#define R0900_P1_TNROBSL 0xf4f6
-#define TNROBSL REGx(R0900_P1_TNROBSL)
-#define F0900_P1_TUN_I2CABORTED 0xf4f60080
-#define F0900_P1_TUN_LPEN 0xf4f60040
-#define F0900_P1_TUN_FCCK 0xf4f60020
-#define F0900_P1_TUN_I2CLOCKED 0xf4f60010
-#define F0900_P1_TUN_PROGDONE 0xf4f6000c
-#define F0900_P1_TUN_RFRESTE1 0xf4f60003
-#define TUN_RFRESTE1 FLDx(F0900_P1_TUN_RFRESTE1)
-
-/*P1_TNRRESTE*/
-#define R0900_P1_TNRRESTE 0xf4f7
-#define TNRRESTE REGx(R0900_P1_TNRRESTE)
-#define F0900_P1_TUN_RFRESTE0 0xf4f700ff
-#define TUN_RFRESTE0 FLDx(F0900_P1_TUN_RFRESTE0)
-
-/*P1_SMAPCOEF7*/
-#define R0900_P1_SMAPCOEF7 0xf500
-#define SMAPCOEF7 REGx(R0900_P1_SMAPCOEF7)
-#define F0900_P1_DIS_QSCALE 0xf5000080
-#define F0900_P1_SMAPCOEF_Q_LLR12 0xf500017f
-
-/*P1_SMAPCOEF6*/
-#define R0900_P1_SMAPCOEF6 0xf501
-#define SMAPCOEF6 REGx(R0900_P1_SMAPCOEF6)
-#define F0900_P1_ADJ_8PSKLLR1 0xf5010004
-#define F0900_P1_OLD_8PSKLLR1 0xf5010002
-#define F0900_P1_DIS_AB8PSK 0xf5010001
-
-/*P1_SMAPCOEF5*/
-#define R0900_P1_SMAPCOEF5 0xf502
-#define SMAPCOEF5 REGx(R0900_P1_SMAPCOEF5)
-#define F0900_P1_DIS_8SCALE 0xf5020080
-#define F0900_P1_SMAPCOEF_8P_LLR23 0xf502017f
-
-/*P1_NCO2MAX1*/
-#define R0900_P1_NCO2MAX1 0xf514
-#define NCO2MAX1 REGx(R0900_P1_NCO2MAX1)
-#define F0900_P1_TETA2_MAXVABS1 0xf51400ff
-
-/*P1_NCO2MAX0*/
-#define R0900_P1_NCO2MAX0 0xf515
-#define NCO2MAX0 REGx(R0900_P1_NCO2MAX0)
-#define F0900_P1_TETA2_MAXVABS0 0xf51500ff
-
-/*P1_NCO2FR1*/
-#define R0900_P1_NCO2FR1 0xf516
-#define NCO2FR1 REGx(R0900_P1_NCO2FR1)
-#define F0900_P1_NCO2FINAL_ANGLE1 0xf51600ff
-
-/*P1_NCO2FR0*/
-#define R0900_P1_NCO2FR0 0xf517
-#define NCO2FR0 REGx(R0900_P1_NCO2FR0)
-#define F0900_P1_NCO2FINAL_ANGLE0 0xf51700ff
-
-/*P1_CFR2AVRGE1*/
-#define R0900_P1_CFR2AVRGE1 0xf518
-#define CFR2AVRGE1 REGx(R0900_P1_CFR2AVRGE1)
-#define F0900_P1_I2C_CFR2AVERAGE1 0xf51800ff
-
-/*P1_CFR2AVRGE0*/
-#define R0900_P1_CFR2AVRGE0 0xf519
-#define CFR2AVRGE0 REGx(R0900_P1_CFR2AVRGE0)
-#define F0900_P1_I2C_CFR2AVERAGE0 0xf51900ff
-
-/*P1_DMDPLHSTAT*/
-#define R0900_P1_DMDPLHSTAT 0xf520
-#define DMDPLHSTAT REGx(R0900_P1_DMDPLHSTAT)
-#define F0900_P1_PLH_STATISTIC 0xf52000ff
-
-/*P1_LOCKTIME3*/
-#define R0900_P1_LOCKTIME3 0xf522
-#define LOCKTIME3 REGx(R0900_P1_LOCKTIME3)
-#define F0900_P1_DEMOD_LOCKTIME3 0xf52200ff
-
-/*P1_LOCKTIME2*/
-#define R0900_P1_LOCKTIME2 0xf523
-#define LOCKTIME2 REGx(R0900_P1_LOCKTIME2)
-#define F0900_P1_DEMOD_LOCKTIME2 0xf52300ff
-
-/*P1_LOCKTIME1*/
-#define R0900_P1_LOCKTIME1 0xf524
-#define LOCKTIME1 REGx(R0900_P1_LOCKTIME1)
-#define F0900_P1_DEMOD_LOCKTIME1 0xf52400ff
-
-/*P1_LOCKTIME0*/
-#define R0900_P1_LOCKTIME0 0xf525
-#define LOCKTIME0 REGx(R0900_P1_LOCKTIME0)
-#define F0900_P1_DEMOD_LOCKTIME0 0xf52500ff
-
-/*P1_VITSCALE*/
-#define R0900_P1_VITSCALE 0xf532
-#define VITSCALE REGx(R0900_P1_VITSCALE)
-#define F0900_P1_NVTH_NOSRANGE 0xf5320080
-#define F0900_P1_VERROR_MAXMODE 0xf5320040
-#define F0900_P1_NSLOWSN_LOCKED 0xf5320008
-#define F0900_P1_DIS_RSFLOCK 0xf5320002
-
-/*P1_FECM*/
-#define R0900_P1_FECM 0xf533
-#define FECM REGx(R0900_P1_FECM)
-#define F0900_P1_DSS_DVB 0xf5330080
-#define DSS_DVB FLDx(F0900_P1_DSS_DVB)
-#define F0900_P1_DSS_SRCH 0xf5330010
-#define F0900_P1_SYNCVIT 0xf5330002
-#define F0900_P1_IQINV 0xf5330001
-#define IQINV FLDx(F0900_P1_IQINV)
-
-/*P1_VTH12*/
-#define R0900_P1_VTH12 0xf534
-#define VTH12 REGx(R0900_P1_VTH12)
-#define F0900_P1_VTH12 0xf53400ff
-
-/*P1_VTH23*/
-#define R0900_P1_VTH23 0xf535
-#define VTH23 REGx(R0900_P1_VTH23)
-#define F0900_P1_VTH23 0xf53500ff
-
-/*P1_VTH34*/
-#define R0900_P1_VTH34 0xf536
-#define VTH34 REGx(R0900_P1_VTH34)
-#define F0900_P1_VTH34 0xf53600ff
-
-/*P1_VTH56*/
-#define R0900_P1_VTH56 0xf537
-#define VTH56 REGx(R0900_P1_VTH56)
-#define F0900_P1_VTH56 0xf53700ff
-
-/*P1_VTH67*/
-#define R0900_P1_VTH67 0xf538
-#define VTH67 REGx(R0900_P1_VTH67)
-#define F0900_P1_VTH67 0xf53800ff
-
-/*P1_VTH78*/
-#define R0900_P1_VTH78 0xf539
-#define VTH78 REGx(R0900_P1_VTH78)
-#define F0900_P1_VTH78 0xf53900ff
-
-/*P1_VITCURPUN*/
-#define R0900_P1_VITCURPUN 0xf53a
-#define VITCURPUN REGx(R0900_P1_VITCURPUN)
-#define F0900_P1_VIT_CURPUN 0xf53a001f
-#define VIT_CURPUN FLDx(F0900_P1_VIT_CURPUN)
-
-/*P1_VERROR*/
-#define R0900_P1_VERROR 0xf53b
-#define VERROR REGx(R0900_P1_VERROR)
-#define F0900_P1_REGERR_VIT 0xf53b00ff
-
-/*P1_PRVIT*/
-#define R0900_P1_PRVIT 0xf53c
-#define PRVIT REGx(R0900_P1_PRVIT)
-#define F0900_P1_DIS_VTHLOCK 0xf53c0040
-#define F0900_P1_E7_8VIT 0xf53c0020
-#define F0900_P1_E6_7VIT 0xf53c0010
-#define F0900_P1_E5_6VIT 0xf53c0008
-#define F0900_P1_E3_4VIT 0xf53c0004
-#define F0900_P1_E2_3VIT 0xf53c0002
-#define F0900_P1_E1_2VIT 0xf53c0001
-
-/*P1_VAVSRVIT*/
-#define R0900_P1_VAVSRVIT 0xf53d
-#define VAVSRVIT REGx(R0900_P1_VAVSRVIT)
-#define F0900_P1_AMVIT 0xf53d0080
-#define F0900_P1_FROZENVIT 0xf53d0040
-#define F0900_P1_SNVIT 0xf53d0030
-#define F0900_P1_TOVVIT 0xf53d000c
-#define F0900_P1_HYPVIT 0xf53d0003
-
-/*P1_VSTATUSVIT*/
-#define R0900_P1_VSTATUSVIT 0xf53e
-#define VSTATUSVIT REGx(R0900_P1_VSTATUSVIT)
-#define F0900_P1_PRFVIT 0xf53e0010
-#define PRFVIT FLDx(F0900_P1_PRFVIT)
-#define F0900_P1_LOCKEDVIT 0xf53e0008
-#define LOCKEDVIT FLDx(F0900_P1_LOCKEDVIT)
-
-/*P1_VTHINUSE*/
-#define R0900_P1_VTHINUSE 0xf53f
-#define VTHINUSE REGx(R0900_P1_VTHINUSE)
-#define F0900_P1_VIT_INUSE 0xf53f00ff
-
-/*P1_KDIV12*/
-#define R0900_P1_KDIV12 0xf540
-#define KDIV12 REGx(R0900_P1_KDIV12)
-#define F0900_P1_K_DIVIDER_12 0xf540007f
-
-/*P1_KDIV23*/
-#define R0900_P1_KDIV23 0xf541
-#define KDIV23 REGx(R0900_P1_KDIV23)
-#define F0900_P1_K_DIVIDER_23 0xf541007f
-
-/*P1_KDIV34*/
-#define R0900_P1_KDIV34 0xf542
-#define KDIV34 REGx(R0900_P1_KDIV34)
-#define F0900_P1_K_DIVIDER_34 0xf542007f
-
-/*P1_KDIV56*/
-#define R0900_P1_KDIV56 0xf543
-#define KDIV56 REGx(R0900_P1_KDIV56)
-#define F0900_P1_K_DIVIDER_56 0xf543007f
-
-/*P1_KDIV67*/
-#define R0900_P1_KDIV67 0xf544
-#define KDIV67 REGx(R0900_P1_KDIV67)
-#define F0900_P1_K_DIVIDER_67 0xf544007f
-
-/*P1_KDIV78*/
-#define R0900_P1_KDIV78 0xf545
-#define KDIV78 REGx(R0900_P1_KDIV78)
-#define F0900_P1_K_DIVIDER_78 0xf545007f
-
-/*P1_PDELCTRL1*/
-#define R0900_P1_PDELCTRL1 0xf550
-#define PDELCTRL1 REGx(R0900_P1_PDELCTRL1)
-#define F0900_P1_INV_MISMASK 0xf5500080
-#define F0900_P1_FILTER_EN 0xf5500020
-#define F0900_P1_EN_MIS00 0xf5500002
-#define F0900_P1_ALGOSWRST 0xf5500001
-#define ALGOSWRST FLDx(F0900_P1_ALGOSWRST)
-
-/*P1_PDELCTRL2*/
-#define R0900_P1_PDELCTRL2 0xf551
-#define PDELCTRL2 REGx(R0900_P1_PDELCTRL2)
-#define F0900_P1_RESET_UPKO_COUNT 0xf5510040
-#define RESET_UPKO_COUNT FLDx(F0900_P1_RESET_UPKO_COUNT)
-#define F0900_P1_FRAME_MODE 0xf5510002
-#define F0900_P1_NOBCHERRFLG_USE 0xf5510001
-
-/*P1_HYSTTHRESH*/
-#define R0900_P1_HYSTTHRESH 0xf554
-#define HYSTTHRESH REGx(R0900_P1_HYSTTHRESH)
-#define F0900_P1_UNLCK_THRESH 0xf55400f0
-#define F0900_P1_DELIN_LCK_THRESH 0xf554000f
-
-/*P1_ISIENTRY*/
-#define R0900_P1_ISIENTRY 0xf55e
-#define ISIENTRY REGx(R0900_P1_ISIENTRY)
-#define F0900_P1_ISI_ENTRY 0xf55e00ff
-
-/*P1_ISIBITENA*/
-#define R0900_P1_ISIBITENA 0xf55f
-#define ISIBITENA REGx(R0900_P1_ISIBITENA)
-#define F0900_P1_ISI_BIT_EN 0xf55f00ff
-
-/*P1_MATSTR1*/
-#define R0900_P1_MATSTR1 0xf560
-#define MATSTR1 REGx(R0900_P1_MATSTR1)
-#define F0900_P1_MATYPE_CURRENT1 0xf56000ff
-
-/*P1_MATSTR0*/
-#define R0900_P1_MATSTR0 0xf561
-#define MATSTR0 REGx(R0900_P1_MATSTR0)
-#define F0900_P1_MATYPE_CURRENT0 0xf56100ff
-
-/*P1_UPLSTR1*/
-#define R0900_P1_UPLSTR1 0xf562
-#define UPLSTR1 REGx(R0900_P1_UPLSTR1)
-#define F0900_P1_UPL_CURRENT1 0xf56200ff
-
-/*P1_UPLSTR0*/
-#define R0900_P1_UPLSTR0 0xf563
-#define UPLSTR0 REGx(R0900_P1_UPLSTR0)
-#define F0900_P1_UPL_CURRENT0 0xf56300ff
-
-/*P1_DFLSTR1*/
-#define R0900_P1_DFLSTR1 0xf564
-#define DFLSTR1 REGx(R0900_P1_DFLSTR1)
-#define F0900_P1_DFL_CURRENT1 0xf56400ff
-
-/*P1_DFLSTR0*/
-#define R0900_P1_DFLSTR0 0xf565
-#define DFLSTR0 REGx(R0900_P1_DFLSTR0)
-#define F0900_P1_DFL_CURRENT0 0xf56500ff
-
-/*P1_SYNCSTR*/
-#define R0900_P1_SYNCSTR 0xf566
-#define SYNCSTR REGx(R0900_P1_SYNCSTR)
-#define F0900_P1_SYNC_CURRENT 0xf56600ff
-
-/*P1_SYNCDSTR1*/
-#define R0900_P1_SYNCDSTR1 0xf567
-#define SYNCDSTR1 REGx(R0900_P1_SYNCDSTR1)
-#define F0900_P1_SYNCD_CURRENT1 0xf56700ff
-
-/*P1_SYNCDSTR0*/
-#define R0900_P1_SYNCDSTR0 0xf568
-#define SYNCDSTR0 REGx(R0900_P1_SYNCDSTR0)
-#define F0900_P1_SYNCD_CURRENT0 0xf56800ff
-
-/*P1_PDELSTATUS1*/
-#define R0900_P1_PDELSTATUS1 0xf569
-#define F0900_P1_PKTDELIN_DELOCK 0xf5690080
-#define F0900_P1_SYNCDUPDFL_BADDFL 0xf5690040
-#define F0900_P1_CONTINUOUS_STREAM 0xf5690020
-#define F0900_P1_UNACCEPTED_STREAM 0xf5690010
-#define F0900_P1_BCH_ERROR_FLAG 0xf5690008
-#define F0900_P1_PKTDELIN_LOCK 0xf5690002
-#define PKTDELIN_LOCK FLDx(F0900_P1_PKTDELIN_LOCK)
-#define F0900_P1_FIRST_LOCK 0xf5690001
-
-/*P1_PDELSTATUS2*/
-#define R0900_P1_PDELSTATUS2 0xf56a
-#define F0900_P1_FRAME_MODCOD 0xf56a007c
-#define F0900_P1_FRAME_TYPE 0xf56a0003
-
-/*P1_BBFCRCKO1*/
-#define R0900_P1_BBFCRCKO1 0xf56b
-#define BBFCRCKO1 REGx(R0900_P1_BBFCRCKO1)
-#define F0900_P1_BBHCRC_KOCNT1 0xf56b00ff
-
-/*P1_BBFCRCKO0*/
-#define R0900_P1_BBFCRCKO0 0xf56c
-#define BBFCRCKO0 REGx(R0900_P1_BBFCRCKO0)
-#define F0900_P1_BBHCRC_KOCNT0 0xf56c00ff
-
-/*P1_UPCRCKO1*/
-#define R0900_P1_UPCRCKO1 0xf56d
-#define UPCRCKO1 REGx(R0900_P1_UPCRCKO1)
-#define F0900_P1_PKTCRC_KOCNT1 0xf56d00ff
-
-/*P1_UPCRCKO0*/
-#define R0900_P1_UPCRCKO0 0xf56e
-#define UPCRCKO0 REGx(R0900_P1_UPCRCKO0)
-#define F0900_P1_PKTCRC_KOCNT0 0xf56e00ff
-
-/*P1_PDELCTRL3*/
-#define R0900_P1_PDELCTRL3 0xf56f
-#define PDELCTRL3 REGx(R0900_P1_PDELCTRL3)
-#define F0900_P1_PKTDEL_CONTFAIL 0xf56f0080
-#define F0900_P1_NOFIFO_BCHERR 0xf56f0020
-
-/*P1_TSSTATEM*/
-#define R0900_P1_TSSTATEM 0xf570
-#define TSSTATEM REGx(R0900_P1_TSSTATEM)
-#define F0900_P1_TSDIL_ON 0xf5700080
-#define F0900_P1_TSRS_ON 0xf5700020
-#define F0900_P1_TSDESCRAMB_ON 0xf5700010
-#define F0900_P1_TSFRAME_MODE 0xf5700008
-#define F0900_P1_TS_DISABLE 0xf5700004
-#define F0900_P1_TSOUT_NOSYNC 0xf5700001
-
-/*P1_TSCFGH*/
-#define R0900_P1_TSCFGH 0xf572
-#define TSCFGH REGx(R0900_P1_TSCFGH)
-#define F0900_P1_TSFIFO_DVBCI 0xf5720080
-#define F0900_P1_TSFIFO_SERIAL 0xf5720040
-#define F0900_P1_TSFIFO_TEIUPDATE 0xf5720020
-#define F0900_P1_TSFIFO_DUTY50 0xf5720010
-#define F0900_P1_TSFIFO_HSGNLOUT 0xf5720008
-#define F0900_P1_TSFIFO_ERRMODE 0xf5720006
-#define F0900_P1_RST_HWARE 0xf5720001
-#define RST_HWARE FLDx(F0900_P1_RST_HWARE)
-
-/*P1_TSCFGM*/
-#define R0900_P1_TSCFGM 0xf573
-#define TSCFGM REGx(R0900_P1_TSCFGM)
-#define F0900_P1_TSFIFO_MANSPEED 0xf57300c0
-#define F0900_P1_TSFIFO_PERMDATA 0xf5730020
-#define F0900_P1_TSFIFO_DPUNACT 0xf5730002
-#define F0900_P1_TSFIFO_INVDATA 0xf5730001
-
-/*P1_TSCFGL*/
-#define R0900_P1_TSCFGL 0xf574
-#define TSCFGL REGx(R0900_P1_TSCFGL)
-#define F0900_P1_TSFIFO_BCLKDEL1CK 0xf57400c0
-#define F0900_P1_BCHERROR_MODE 0xf5740030
-#define F0900_P1_TSFIFO_NSGNL2DATA 0xf5740008
-#define F0900_P1_TSFIFO_EMBINDVB 0xf5740004
-#define F0900_P1_TSFIFO_BITSPEED 0xf5740003
-
-/*P1_TSINSDELH*/
-#define R0900_P1_TSINSDELH 0xf576
-#define TSINSDELH REGx(R0900_P1_TSINSDELH)
-#define F0900_P1_TSDEL_SYNCBYTE 0xf5760080
-#define F0900_P1_TSDEL_XXHEADER 0xf5760040
-#define F0900_P1_TSDEL_BBHEADER 0xf5760020
-#define F0900_P1_TSDEL_DATAFIELD 0xf5760010
-#define F0900_P1_TSINSDEL_ISCR 0xf5760008
-#define F0900_P1_TSINSDEL_NPD 0xf5760004
-#define F0900_P1_TSINSDEL_RSPARITY 0xf5760002
-#define F0900_P1_TSINSDEL_CRC8 0xf5760001
-
-/*P1_TSDIVN*/
-#define R0900_P1_TSDIVN 0xf579
-#define TSDIVN REGx(R0900_P1_TSDIVN)
-#define F0900_P1_TSFIFO_SPEEDMODE 0xf57900c0
-
-/*P1_TSCFG4*/
-#define R0900_P1_TSCFG4 0xf57a
-#define TSCFG4 REGx(R0900_P1_TSCFG4)
-#define F0900_P1_TSFIFO_TSSPEEDMODE 0xf57a00c0
-
-/*P1_TSSPEED*/
-#define R0900_P1_TSSPEED 0xf580
-#define TSSPEED REGx(R0900_P1_TSSPEED)
-#define F0900_P1_TSFIFO_OUTSPEED 0xf58000ff
-
-/*P1_TSSTATUS*/
-#define R0900_P1_TSSTATUS 0xf581
-#define TSSTATUS REGx(R0900_P1_TSSTATUS)
-#define F0900_P1_TSFIFO_LINEOK 0xf5810080
-#define TSFIFO_LINEOK FLDx(F0900_P1_TSFIFO_LINEOK)
-#define F0900_P1_TSFIFO_ERROR 0xf5810040
-#define F0900_P1_DIL_READY 0xf5810001
-
-/*P1_TSSTATUS2*/
-#define R0900_P1_TSSTATUS2 0xf582
-#define TSSTATUS2 REGx(R0900_P1_TSSTATUS2)
-#define F0900_P1_TSFIFO_DEMODSEL 0xf5820080
-#define F0900_P1_TSFIFOSPEED_STORE 0xf5820040
-#define F0900_P1_DILXX_RESET 0xf5820020
-#define F0900_P1_TSSERIAL_IMPOS 0xf5820010
-#define F0900_P1_SCRAMBDETECT 0xf5820002
-
-/*P1_TSBITRATE1*/
-#define R0900_P1_TSBITRATE1 0xf583
-#define TSBITRATE1 REGx(R0900_P1_TSBITRATE1)
-#define F0900_P1_TSFIFO_BITRATE1 0xf58300ff
-
-/*P1_TSBITRATE0*/
-#define R0900_P1_TSBITRATE0 0xf584
-#define TSBITRATE0 REGx(R0900_P1_TSBITRATE0)
-#define F0900_P1_TSFIFO_BITRATE0 0xf58400ff
-
-/*P1_ERRCTRL1*/
-#define R0900_P1_ERRCTRL1 0xf598
-#define ERRCTRL1 REGx(R0900_P1_ERRCTRL1)
-#define F0900_P1_ERR_SOURCE1 0xf59800f0
-#define F0900_P1_NUM_EVENT1 0xf5980007
-
-/*P1_ERRCNT12*/
-#define R0900_P1_ERRCNT12 0xf599
-#define ERRCNT12 REGx(R0900_P1_ERRCNT12)
-#define F0900_P1_ERRCNT1_OLDVALUE 0xf5990080
-#define F0900_P1_ERR_CNT12 0xf599007f
-#define ERR_CNT12 FLDx(F0900_P1_ERR_CNT12)
-
-/*P1_ERRCNT11*/
-#define R0900_P1_ERRCNT11 0xf59a
-#define ERRCNT11 REGx(R0900_P1_ERRCNT11)
-#define F0900_P1_ERR_CNT11 0xf59a00ff
-#define ERR_CNT11 FLDx(F0900_P1_ERR_CNT11)
-
-/*P1_ERRCNT10*/
-#define R0900_P1_ERRCNT10 0xf59b
-#define ERRCNT10 REGx(R0900_P1_ERRCNT10)
-#define F0900_P1_ERR_CNT10 0xf59b00ff
-#define ERR_CNT10 FLDx(F0900_P1_ERR_CNT10)
-
-/*P1_ERRCTRL2*/
-#define R0900_P1_ERRCTRL2 0xf59c
-#define ERRCTRL2 REGx(R0900_P1_ERRCTRL2)
-#define F0900_P1_ERR_SOURCE2 0xf59c00f0
-#define F0900_P1_NUM_EVENT2 0xf59c0007
-
-/*P1_ERRCNT22*/
-#define R0900_P1_ERRCNT22 0xf59d
-#define ERRCNT22 REGx(R0900_P1_ERRCNT22)
-#define F0900_P1_ERRCNT2_OLDVALUE 0xf59d0080
-#define F0900_P1_ERR_CNT22 0xf59d007f
-#define ERR_CNT22 FLDx(F0900_P1_ERR_CNT22)
-
-/*P1_ERRCNT21*/
-#define R0900_P1_ERRCNT21 0xf59e
-#define ERRCNT21 REGx(R0900_P1_ERRCNT21)
-#define F0900_P1_ERR_CNT21 0xf59e00ff
-#define ERR_CNT21 FLDx(F0900_P1_ERR_CNT21)
-
-/*P1_ERRCNT20*/
-#define R0900_P1_ERRCNT20 0xf59f
-#define ERRCNT20 REGx(R0900_P1_ERRCNT20)
-#define F0900_P1_ERR_CNT20 0xf59f00ff
-#define ERR_CNT20 FLDx(F0900_P1_ERR_CNT20)
-
-/*P1_FECSPY*/
-#define R0900_P1_FECSPY 0xf5a0
-#define FECSPY REGx(R0900_P1_FECSPY)
-#define F0900_P1_SPY_ENABLE 0xf5a00080
-#define F0900_P1_NO_SYNCBYTE 0xf5a00040
-#define F0900_P1_SERIAL_MODE 0xf5a00020
-#define F0900_P1_UNUSUAL_PACKET 0xf5a00010
-#define F0900_P1_BERMETER_DATAMODE 0xf5a00008
-#define F0900_P1_BERMETER_LMODE 0xf5a00002
-#define F0900_P1_BERMETER_RESET 0xf5a00001
-
-/*P1_FSPYCFG*/
-#define R0900_P1_FSPYCFG 0xf5a1
-#define FSPYCFG REGx(R0900_P1_FSPYCFG)
-#define F0900_P1_FECSPY_INPUT 0xf5a100c0
-#define F0900_P1_RST_ON_ERROR 0xf5a10020
-#define F0900_P1_ONE_SHOT 0xf5a10010
-#define F0900_P1_I2C_MODE 0xf5a1000c
-#define F0900_P1_SPY_HYSTERESIS 0xf5a10003
-
-/*P1_FSPYDATA*/
-#define R0900_P1_FSPYDATA 0xf5a2
-#define FSPYDATA REGx(R0900_P1_FSPYDATA)
-#define F0900_P1_SPY_STUFFING 0xf5a20080
-#define F0900_P1_SPY_CNULLPKT 0xf5a20020
-#define F0900_P1_SPY_OUTDATA_MODE 0xf5a2001f
-
-/*P1_FSPYOUT*/
-#define R0900_P1_FSPYOUT 0xf5a3
-#define FSPYOUT REGx(R0900_P1_FSPYOUT)
-#define F0900_P1_FSPY_DIRECT 0xf5a30080
-#define F0900_P1_STUFF_MODE 0xf5a30007
-
-/*P1_FSTATUS*/
-#define R0900_P1_FSTATUS 0xf5a4
-#define FSTATUS REGx(R0900_P1_FSTATUS)
-#define F0900_P1_SPY_ENDSIM 0xf5a40080
-#define F0900_P1_VALID_SIM 0xf5a40040
-#define F0900_P1_FOUND_SIGNAL 0xf5a40020
-#define F0900_P1_DSS_SYNCBYTE 0xf5a40010
-#define F0900_P1_RESULT_STATE 0xf5a4000f
-
-/*P1_FBERCPT4*/
-#define R0900_P1_FBERCPT4 0xf5a8
-#define FBERCPT4 REGx(R0900_P1_FBERCPT4)
-#define F0900_P1_FBERMETER_CPT4 0xf5a800ff
-
-/*P1_FBERCPT3*/
-#define R0900_P1_FBERCPT3 0xf5a9
-#define FBERCPT3 REGx(R0900_P1_FBERCPT3)
-#define F0900_P1_FBERMETER_CPT3 0xf5a900ff
-
-/*P1_FBERCPT2*/
-#define R0900_P1_FBERCPT2 0xf5aa
-#define FBERCPT2 REGx(R0900_P1_FBERCPT2)
-#define F0900_P1_FBERMETER_CPT2 0xf5aa00ff
-
-/*P1_FBERCPT1*/
-#define R0900_P1_FBERCPT1 0xf5ab
-#define FBERCPT1 REGx(R0900_P1_FBERCPT1)
-#define F0900_P1_FBERMETER_CPT1 0xf5ab00ff
-
-/*P1_FBERCPT0*/
-#define R0900_P1_FBERCPT0 0xf5ac
-#define FBERCPT0 REGx(R0900_P1_FBERCPT0)
-#define F0900_P1_FBERMETER_CPT0 0xf5ac00ff
-
-/*P1_FBERERR2*/
-#define R0900_P1_FBERERR2 0xf5ad
-#define FBERERR2 REGx(R0900_P1_FBERERR2)
-#define F0900_P1_FBERMETER_ERR2 0xf5ad00ff
-
-/*P1_FBERERR1*/
-#define R0900_P1_FBERERR1 0xf5ae
-#define FBERERR1 REGx(R0900_P1_FBERERR1)
-#define F0900_P1_FBERMETER_ERR1 0xf5ae00ff
-
-/*P1_FBERERR0*/
-#define R0900_P1_FBERERR0 0xf5af
-#define FBERERR0 REGx(R0900_P1_FBERERR0)
-#define F0900_P1_FBERMETER_ERR0 0xf5af00ff
-
-/*P1_FSPYBER*/
-#define R0900_P1_FSPYBER 0xf5b2
-#define FSPYBER REGx(R0900_P1_FSPYBER)
-#define F0900_P1_FSPYBER_SYNCBYTE 0xf5b20010
-#define F0900_P1_FSPYBER_UNSYNC 0xf5b20008
-#define F0900_P1_FSPYBER_CTIME 0xf5b20007
-
-/*RCCFG2*/
-#define R0900_RCCFG2 0xf600
-
-/*TSGENERAL*/
-#define R0900_TSGENERAL 0xf630
-#define F0900_TSFIFO_DISTS2PAR 0xf6300040
-#define F0900_MUXSTREAM_OUTMODE 0xf6300008
-#define F0900_TSFIFO_PERMPARAL 0xf6300006
-
-/*TSGENERAL1X*/
-#define R0900_TSGENERAL1X 0xf670
-
-/*NBITER_NF4*/
-#define R0900_NBITER_NF4 0xfa03
-#define F0900_NBITER_NF_QP_1_2 0xfa0300ff
-
-/*NBITER_NF5*/
-#define R0900_NBITER_NF5 0xfa04
-#define F0900_NBITER_NF_QP_3_5 0xfa0400ff
-
-/*NBITER_NF6*/
-#define R0900_NBITER_NF6 0xfa05
-#define F0900_NBITER_NF_QP_2_3 0xfa0500ff
-
-/*NBITER_NF7*/
-#define R0900_NBITER_NF7 0xfa06
-#define F0900_NBITER_NF_QP_3_4 0xfa0600ff
-
-/*NBITER_NF8*/
-#define R0900_NBITER_NF8 0xfa07
-#define F0900_NBITER_NF_QP_4_5 0xfa0700ff
-
-/*NBITER_NF9*/
-#define R0900_NBITER_NF9 0xfa08
-#define F0900_NBITER_NF_QP_5_6 0xfa0800ff
-
-/*NBITER_NF10*/
-#define R0900_NBITER_NF10 0xfa09
-#define F0900_NBITER_NF_QP_8_9 0xfa0900ff
-
-/*NBITER_NF11*/
-#define R0900_NBITER_NF11 0xfa0a
-#define F0900_NBITER_NF_QP_9_10 0xfa0a00ff
-
-/*NBITER_NF12*/
-#define R0900_NBITER_NF12 0xfa0b
-#define F0900_NBITER_NF_8P_3_5 0xfa0b00ff
-
-/*NBITER_NF13*/
-#define R0900_NBITER_NF13 0xfa0c
-#define F0900_NBITER_NF_8P_2_3 0xfa0c00ff
-
-/*NBITER_NF14*/
-#define R0900_NBITER_NF14 0xfa0d
-#define F0900_NBITER_NF_8P_3_4 0xfa0d00ff
-
-/*NBITER_NF15*/
-#define R0900_NBITER_NF15 0xfa0e
-#define F0900_NBITER_NF_8P_5_6 0xfa0e00ff
-
-/*NBITER_NF16*/
-#define R0900_NBITER_NF16 0xfa0f
-#define F0900_NBITER_NF_8P_8_9 0xfa0f00ff
-
-/*NBITER_NF17*/
-#define R0900_NBITER_NF17 0xfa10
-#define F0900_NBITER_NF_8P_9_10 0xfa1000ff
-
-/*NBITERNOERR*/
-#define R0900_NBITERNOERR 0xfa3f
-#define F0900_NBITER_STOP_CRIT 0xfa3f000f
-
-/*GAINLLR_NF4*/
-#define R0900_GAINLLR_NF4 0xfa43
-#define F0900_GAINLLR_NF_QP_1_2 0xfa43007f
-
-/*GAINLLR_NF5*/
-#define R0900_GAINLLR_NF5 0xfa44
-#define F0900_GAINLLR_NF_QP_3_5 0xfa44007f
-
-/*GAINLLR_NF6*/
-#define R0900_GAINLLR_NF6 0xfa45
-#define F0900_GAINLLR_NF_QP_2_3 0xfa45007f
-
-/*GAINLLR_NF7*/
-#define R0900_GAINLLR_NF7 0xfa46
-#define F0900_GAINLLR_NF_QP_3_4 0xfa46007f
-
-/*GAINLLR_NF8*/
-#define R0900_GAINLLR_NF8 0xfa47
-#define F0900_GAINLLR_NF_QP_4_5 0xfa47007f
-
-/*GAINLLR_NF9*/
-#define R0900_GAINLLR_NF9 0xfa48
-#define F0900_GAINLLR_NF_QP_5_6 0xfa48007f
-
-/*GAINLLR_NF10*/
-#define R0900_GAINLLR_NF10 0xfa49
-#define F0900_GAINLLR_NF_QP_8_9 0xfa49007f
-
-/*GAINLLR_NF11*/
-#define R0900_GAINLLR_NF11 0xfa4a
-#define F0900_GAINLLR_NF_QP_9_10 0xfa4a007f
-
-/*GAINLLR_NF12*/
-#define R0900_GAINLLR_NF12 0xfa4b
-#define F0900_GAINLLR_NF_8P_3_5 0xfa4b007f
-
-/*GAINLLR_NF13*/
-#define R0900_GAINLLR_NF13 0xfa4c
-#define F0900_GAINLLR_NF_8P_2_3 0xfa4c007f
-
-/*GAINLLR_NF14*/
-#define R0900_GAINLLR_NF14 0xfa4d
-#define F0900_GAINLLR_NF_8P_3_4 0xfa4d007f
-
-/*GAINLLR_NF15*/
-#define R0900_GAINLLR_NF15 0xfa4e
-#define F0900_GAINLLR_NF_8P_5_6 0xfa4e007f
-
-/*GAINLLR_NF16*/
-#define R0900_GAINLLR_NF16 0xfa4f
-#define F0900_GAINLLR_NF_8P_8_9 0xfa4f007f
-
-/*GAINLLR_NF17*/
-#define R0900_GAINLLR_NF17 0xfa50
-#define F0900_GAINLLR_NF_8P_9_10 0xfa50007f
-
-/*CFGEXT*/
-#define R0900_CFGEXT 0xfa80
-#define F0900_STAGMODE 0xfa800080
-#define F0900_BYPBCH 0xfa800040
-#define F0900_BYPLDPC 0xfa800020
-#define F0900_LDPCMODE 0xfa800010
-#define F0900_INVLLRSIGN 0xfa800008
-#define F0900_SHORTMULT 0xfa800004
-#define F0900_EXTERNTX 0xfa800001
-
-/*GENCFG*/
-#define R0900_GENCFG 0xfa86
-#define F0900_BROADCAST 0xfa860010
-#define F0900_PRIORITY 0xfa860002
-#define F0900_DDEMOD 0xfa860001
-
-/*LDPCERR1*/
-#define R0900_LDPCERR1 0xfa96
-#define F0900_LDPC_ERRORS_COUNTER1 0xfa9600ff
-
-/*LDPCERR0*/
-#define R0900_LDPCERR0 0xfa97
-#define F0900_LDPC_ERRORS_COUNTER0 0xfa9700ff
-
-/*BCHERR*/
-#define R0900_BCHERR 0xfa98
-#define F0900_ERRORFLAG 0xfa980010
-#define F0900_BCH_ERRORS_COUNTER 0xfa98000f
-
-/*TSTRES0*/
-#define R0900_TSTRES0 0xff11
-#define F0900_FRESFEC 0xff110080
-
-/*P2_TCTL4*/
-#define R0900_P2_TCTL4 0xff28
-#define F0900_P2_PN4_SELECT 0xff280020
-
-/*P1_TCTL4*/
-#define R0900_P1_TCTL4 0xff48
-#define TCTL4 shiftx(R0900_P1_TCTL4, demod, 0x20)
-#define F0900_P1_PN4_SELECT 0xff480020
-
-/*P2_TSTDISRX*/
-#define R0900_P2_TSTDISRX 0xff65
-#define F0900_P2_PIN_SELECT1 0xff650008
-
-/*P1_TSTDISRX*/
-#define R0900_P1_TSTDISRX 0xff67
-#define TSTDISRX shiftx(R0900_P1_TSTDISRX, demod, 2)
-#define F0900_P1_PIN_SELECT1 0xff670008
-#define PIN_SELECT1 shiftx(F0900_P1_PIN_SELECT1, demod, 0x20000)
-
-#define STV0900_NBREGS 723
-#define STV0900_NBFIELDS 1420
-
-#endif
-
diff --git a/drivers/media/dvb/frontends/stv0900_sw.c b/drivers/media/dvb/frontends/stv0900_sw.c
deleted file mode 100644
index 4af2078..0000000
--- a/drivers/media/dvb/frontends/stv0900_sw.c
+++ /dev/null
@@ -1,2032 +0,0 @@
-/*
- * stv0900_sw.c
- *
- * Driver for ST STV0900 satellite demodulator IC.
- *
- * Copyright (C) ST Microelectronics.
- * Copyright (C) 2009 NetUP Inc.
- * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "stv0900.h"
-#include "stv0900_reg.h"
-#include "stv0900_priv.h"
-
-s32 shiftx(s32 x, int demod, s32 shift)
-{
-	if (demod == 1)
-		return x - shift;
-
-	return x;
-}
-
-int stv0900_check_signal_presence(struct stv0900_internal *intp,
-					enum fe_stv0900_demod_num demod)
-{
-	s32	carr_offset,
-		agc2_integr,
-		max_carrier;
-
-	int no_signal = FALSE;
-
-	carr_offset = (stv0900_read_reg(intp, CFR2) << 8)
-					| stv0900_read_reg(intp, CFR1);
-	carr_offset = ge2comp(carr_offset, 16);
-	agc2_integr = (stv0900_read_reg(intp, AGC2I1) << 8)
-					| stv0900_read_reg(intp, AGC2I0);
-	max_carrier = intp->srch_range[demod] / 1000;
-
-	max_carrier += (max_carrier / 10);
-	max_carrier = 65536 * (max_carrier / 2);
-	max_carrier /= intp->mclk / 1000;
-	if (max_carrier > 0x4000)
-		max_carrier = 0x4000;
-
-	if ((agc2_integr > 0x2000)
-			|| (carr_offset > (2 * max_carrier))
-			|| (carr_offset < (-2 * max_carrier)))
-		no_signal = TRUE;
-
-	return no_signal;
-}
-
-static void stv0900_get_sw_loop_params(struct stv0900_internal *intp,
-				s32 *frequency_inc, s32 *sw_timeout,
-				s32 *steps,
-				enum fe_stv0900_demod_num demod)
-{
-	s32 timeout, freq_inc, max_steps, srate, max_carrier;
-
-	enum fe_stv0900_search_standard	standard;
-
-	srate = intp->symbol_rate[demod];
-	max_carrier = intp->srch_range[demod] / 1000;
-	max_carrier += max_carrier / 10;
-	standard = intp->srch_standard[demod];
-
-	max_carrier = 65536 * (max_carrier / 2);
-	max_carrier /= intp->mclk / 1000;
-
-	if (max_carrier > 0x4000)
-		max_carrier = 0x4000;
-
-	freq_inc = srate;
-	freq_inc /= intp->mclk >> 10;
-	freq_inc = freq_inc << 6;
-
-	switch (standard) {
-	case STV0900_SEARCH_DVBS1:
-	case STV0900_SEARCH_DSS:
-		freq_inc *= 3;
-		timeout = 20;
-		break;
-	case STV0900_SEARCH_DVBS2:
-		freq_inc *= 4;
-		timeout = 25;
-		break;
-	case STV0900_AUTO_SEARCH:
-	default:
-		freq_inc *= 3;
-		timeout = 25;
-		break;
-	}
-
-	freq_inc /= 100;
-
-	if ((freq_inc > max_carrier) || (freq_inc < 0))
-		freq_inc = max_carrier / 2;
-
-	timeout *= 27500;
-
-	if (srate > 0)
-		timeout /= srate / 1000;
-
-	if ((timeout > 100) || (timeout < 0))
-		timeout = 100;
-
-	max_steps = (max_carrier / freq_inc) + 1;
-
-	if ((max_steps > 100) || (max_steps < 0)) {
-		max_steps =  100;
-		freq_inc = max_carrier / max_steps;
-	}
-
-	*frequency_inc = freq_inc;
-	*sw_timeout = timeout;
-	*steps = max_steps;
-
-}
-
-static int stv0900_search_carr_sw_loop(struct stv0900_internal *intp,
-				s32 FreqIncr, s32 Timeout, int zigzag,
-				s32 MaxStep, enum fe_stv0900_demod_num demod)
-{
-	int	no_signal,
-		lock = FALSE;
-	s32	stepCpt,
-		freqOffset,
-		max_carrier;
-
-	max_carrier = intp->srch_range[demod] / 1000;
-	max_carrier += (max_carrier / 10);
-
-	max_carrier = 65536 * (max_carrier / 2);
-	max_carrier /= intp->mclk / 1000;
-
-	if (max_carrier > 0x4000)
-		max_carrier = 0x4000;
-
-	if (zigzag == TRUE)
-		freqOffset = 0;
-	else
-		freqOffset = -max_carrier + FreqIncr;
-
-	stepCpt = 0;
-
-	do {
-		stv0900_write_reg(intp, DMDISTATE, 0x1c);
-		stv0900_write_reg(intp, CFRINIT1, (freqOffset / 256) & 0xff);
-		stv0900_write_reg(intp, CFRINIT0, freqOffset & 0xff);
-		stv0900_write_reg(intp, DMDISTATE, 0x18);
-		stv0900_write_bits(intp, ALGOSWRST, 1);
-
-		if (intp->chip_id == 0x12) {
-			stv0900_write_bits(intp, RST_HWARE, 1);
-			stv0900_write_bits(intp, RST_HWARE, 0);
-		}
-
-		if (zigzag == TRUE) {
-			if (freqOffset >= 0)
-				freqOffset = -freqOffset - 2 * FreqIncr;
-			else
-				freqOffset = -freqOffset;
-		} else
-			freqOffset += + 2 * FreqIncr;
-
-		stepCpt++;
-		lock = stv0900_get_demod_lock(intp, demod, Timeout);
-		no_signal = stv0900_check_signal_presence(intp, demod);
-
-	} while ((lock == FALSE)
-			&& (no_signal == FALSE)
-			&& ((freqOffset - FreqIncr) <  max_carrier)
-			&& ((freqOffset + FreqIncr) > -max_carrier)
-			&& (stepCpt < MaxStep));
-
-	stv0900_write_bits(intp, ALGOSWRST, 0);
-
-	return lock;
-}
-
-static int stv0900_sw_algo(struct stv0900_internal *intp,
-				enum fe_stv0900_demod_num demod)
-{
-	int	lock = FALSE,
-		no_signal,
-		zigzag;
-	s32	s2fw,
-		fqc_inc,
-		sft_stp_tout,
-		trial_cntr,
-		max_steps;
-
-	stv0900_get_sw_loop_params(intp, &fqc_inc, &sft_stp_tout,
-					&max_steps, demod);
-	switch (intp->srch_standard[demod]) {
-	case STV0900_SEARCH_DVBS1:
-	case STV0900_SEARCH_DSS:
-		if (intp->chip_id >= 0x20)
-			stv0900_write_reg(intp, CARFREQ, 0x3b);
-		else
-			stv0900_write_reg(intp, CARFREQ, 0xef);
-
-		stv0900_write_reg(intp, DMDCFGMD, 0x49);
-		zigzag = FALSE;
-		break;
-	case STV0900_SEARCH_DVBS2:
-		if (intp->chip_id >= 0x20)
-			stv0900_write_reg(intp, CORRELABS, 0x79);
-		else
-			stv0900_write_reg(intp, CORRELABS, 0x68);
-
-		stv0900_write_reg(intp, DMDCFGMD, 0x89);
-
-		zigzag = TRUE;
-		break;
-	case STV0900_AUTO_SEARCH:
-	default:
-		if (intp->chip_id >= 0x20) {
-			stv0900_write_reg(intp, CARFREQ, 0x3b);
-			stv0900_write_reg(intp, CORRELABS, 0x79);
-		} else {
-			stv0900_write_reg(intp, CARFREQ, 0xef);
-			stv0900_write_reg(intp, CORRELABS, 0x68);
-		}
-
-		stv0900_write_reg(intp, DMDCFGMD, 0xc9);
-		zigzag = FALSE;
-		break;
-	}
-
-	trial_cntr = 0;
-	do {
-		lock = stv0900_search_carr_sw_loop(intp,
-						fqc_inc,
-						sft_stp_tout,
-						zigzag,
-						max_steps,
-						demod);
-		no_signal = stv0900_check_signal_presence(intp, demod);
-		trial_cntr++;
-		if ((lock == TRUE)
-				|| (no_signal == TRUE)
-				|| (trial_cntr == 2)) {
-
-			if (intp->chip_id >= 0x20) {
-				stv0900_write_reg(intp, CARFREQ, 0x49);
-				stv0900_write_reg(intp, CORRELABS, 0x9e);
-			} else {
-				stv0900_write_reg(intp, CARFREQ, 0xed);
-				stv0900_write_reg(intp, CORRELABS, 0x88);
-			}
-
-			if ((stv0900_get_bits(intp, HEADER_MODE) ==
-						STV0900_DVBS2_FOUND) &&
-							(lock == TRUE)) {
-				msleep(sft_stp_tout);
-				s2fw = stv0900_get_bits(intp, FLYWHEEL_CPT);
-
-				if (s2fw < 0xd) {
-					msleep(sft_stp_tout);
-					s2fw = stv0900_get_bits(intp,
-								FLYWHEEL_CPT);
-				}
-
-				if (s2fw < 0xd) {
-					lock = FALSE;
-
-					if (trial_cntr < 2) {
-						if (intp->chip_id >= 0x20)
-							stv0900_write_reg(intp,
-								CORRELABS,
-								0x79);
-						else
-							stv0900_write_reg(intp,
-								CORRELABS,
-								0x68);
-
-						stv0900_write_reg(intp,
-								DMDCFGMD,
-								0x89);
-					}
-				}
-			}
-		}
-
-	} while ((lock == FALSE)
-		&& (trial_cntr < 2)
-		&& (no_signal == FALSE));
-
-	return lock;
-}
-
-static u32 stv0900_get_symbol_rate(struct stv0900_internal *intp,
-					u32 mclk,
-					enum fe_stv0900_demod_num demod)
-{
-	s32	rem1, rem2, intval1, intval2, srate;
-
-	srate = (stv0900_get_bits(intp, SYMB_FREQ3) << 24) +
-		(stv0900_get_bits(intp, SYMB_FREQ2) << 16) +
-		(stv0900_get_bits(intp, SYMB_FREQ1) << 8) +
-		(stv0900_get_bits(intp, SYMB_FREQ0));
-	dprintk("lock: srate=%d r0=0x%x r1=0x%x r2=0x%x r3=0x%x \n",
-		srate, stv0900_get_bits(intp, SYMB_FREQ0),
-		stv0900_get_bits(intp, SYMB_FREQ1),
-		stv0900_get_bits(intp, SYMB_FREQ2),
-		stv0900_get_bits(intp, SYMB_FREQ3));
-
-	intval1 = (mclk) >> 16;
-	intval2 = (srate) >> 16;
-
-	rem1 = (mclk) % 0x10000;
-	rem2 = (srate) % 0x10000;
-	srate =	(intval1 * intval2) +
-		((intval1 * rem2) >> 16) +
-		((intval2 * rem1) >> 16);
-
-	return srate;
-}
-
-static void stv0900_set_symbol_rate(struct stv0900_internal *intp,
-					u32 mclk, u32 srate,
-					enum fe_stv0900_demod_num demod)
-{
-	u32 symb;
-
-	dprintk("%s: Mclk %d, SR %d, Dmd %d\n", __func__, mclk,
-							srate, demod);
-
-	if (srate > 60000000) {
-		symb = srate << 4;
-		symb /= (mclk >> 12);
-	} else if (srate > 6000000) {
-		symb = srate << 6;
-		symb /= (mclk >> 10);
-	} else {
-		symb = srate << 9;
-		symb /= (mclk >> 7);
-	}
-
-	stv0900_write_reg(intp, SFRINIT1, (symb >> 8) & 0x7f);
-	stv0900_write_reg(intp, SFRINIT1 + 1, (symb & 0xff));
-}
-
-static void stv0900_set_max_symbol_rate(struct stv0900_internal *intp,
-					u32 mclk, u32 srate,
-					enum fe_stv0900_demod_num demod)
-{
-	u32 symb;
-
-	srate = 105 * (srate / 100);
-
-	if (srate > 60000000) {
-		symb = srate << 4;
-		symb /= (mclk >> 12);
-	} else if (srate > 6000000) {
-		symb = srate << 6;
-		symb /= (mclk >> 10);
-	} else {
-		symb = srate << 9;
-		symb /= (mclk >> 7);
-	}
-
-	if (symb < 0x7fff) {
-		stv0900_write_reg(intp, SFRUP1, (symb >> 8) & 0x7f);
-		stv0900_write_reg(intp, SFRUP1 + 1, (symb & 0xff));
-	} else {
-		stv0900_write_reg(intp, SFRUP1, 0x7f);
-		stv0900_write_reg(intp, SFRUP1 + 1, 0xff);
-	}
-}
-
-static void stv0900_set_min_symbol_rate(struct stv0900_internal *intp,
-					u32 mclk, u32 srate,
-					enum fe_stv0900_demod_num demod)
-{
-	u32	symb;
-
-	srate = 95 * (srate / 100);
-	if (srate > 60000000) {
-		symb = srate << 4;
-		symb /= (mclk >> 12);
-
-	} else if (srate > 6000000) {
-		symb = srate << 6;
-		symb /= (mclk >> 10);
-
-	} else {
-		symb = srate << 9;
-		symb /= (mclk >> 7);
-	}
-
-	stv0900_write_reg(intp, SFRLOW1, (symb >> 8) & 0xff);
-	stv0900_write_reg(intp, SFRLOW1 + 1, (symb & 0xff));
-}
-
-static s32 stv0900_get_timing_offst(struct stv0900_internal *intp,
-					u32 srate,
-					enum fe_stv0900_demod_num demod)
-{
-	s32 timingoffset;
-
-
-	timingoffset = (stv0900_read_reg(intp, TMGREG2) << 16) +
-		       (stv0900_read_reg(intp, TMGREG2 + 1) << 8) +
-		       (stv0900_read_reg(intp, TMGREG2 + 2));
-
-	timingoffset = ge2comp(timingoffset, 24);
-
-
-	if (timingoffset == 0)
-		timingoffset = 1;
-
-	timingoffset = ((s32)srate * 10) / ((s32)0x1000000 / timingoffset);
-	timingoffset /= 320;
-
-	return timingoffset;
-}
-
-static void stv0900_set_dvbs2_rolloff(struct stv0900_internal *intp,
-					enum fe_stv0900_demod_num demod)
-{
-	s32 rolloff;
-
-	if (intp->chip_id == 0x10) {
-		stv0900_write_bits(intp, MANUALSX_ROLLOFF, 1);
-		rolloff = stv0900_read_reg(intp, MATSTR1) & 0x03;
-		stv0900_write_bits(intp, ROLLOFF_CONTROL, rolloff);
-	} else if (intp->chip_id <= 0x20)
-		stv0900_write_bits(intp, MANUALSX_ROLLOFF, 0);
-	else /* cut 3.0 */
-		stv0900_write_bits(intp, MANUALS2_ROLLOFF, 0);
-}
-
-static u32 stv0900_carrier_width(u32 srate, enum fe_stv0900_rolloff ro)
-{
-	u32 rolloff;
-
-	switch (ro) {
-	case STV0900_20:
-		rolloff = 20;
-		break;
-	case STV0900_25:
-		rolloff = 25;
-		break;
-	case STV0900_35:
-	default:
-		rolloff = 35;
-		break;
-	}
-
-	return srate  + (srate * rolloff) / 100;
-}
-
-static int stv0900_check_timing_lock(struct stv0900_internal *intp,
-				enum fe_stv0900_demod_num demod)
-{
-	int timingLock = FALSE;
-	s32	i,
-		timingcpt = 0;
-	u8	car_freq,
-		tmg_th_high,
-		tmg_th_low;
-
-	car_freq = stv0900_read_reg(intp, CARFREQ);
-	tmg_th_high = stv0900_read_reg(intp, TMGTHRISE);
-	tmg_th_low = stv0900_read_reg(intp, TMGTHFALL);
-	stv0900_write_reg(intp, TMGTHRISE, 0x20);
-	stv0900_write_reg(intp, TMGTHFALL, 0x0);
-	stv0900_write_bits(intp, CFR_AUTOSCAN, 0);
-	stv0900_write_reg(intp, RTC, 0x80);
-	stv0900_write_reg(intp, RTCS2, 0x40);
-	stv0900_write_reg(intp, CARFREQ, 0x0);
-	stv0900_write_reg(intp, CFRINIT1, 0x0);
-	stv0900_write_reg(intp, CFRINIT0, 0x0);
-	stv0900_write_reg(intp, AGC2REF, 0x65);
-	stv0900_write_reg(intp, DMDISTATE, 0x18);
-	msleep(7);
-
-	for (i = 0; i < 10; i++) {
-		if (stv0900_get_bits(intp, TMGLOCK_QUALITY) >= 2)
-			timingcpt++;
-
-		msleep(1);
-	}
-
-	if (timingcpt >= 3)
-		timingLock = TRUE;
-
-	stv0900_write_reg(intp, AGC2REF, 0x38);
-	stv0900_write_reg(intp, RTC, 0x88);
-	stv0900_write_reg(intp, RTCS2, 0x68);
-	stv0900_write_reg(intp, CARFREQ, car_freq);
-	stv0900_write_reg(intp, TMGTHRISE, tmg_th_high);
-	stv0900_write_reg(intp, TMGTHFALL, tmg_th_low);
-
-	return	timingLock;
-}
-
-static int stv0900_get_demod_cold_lock(struct dvb_frontend *fe,
-					s32 demod_timeout)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *intp = state->internal;
-	enum fe_stv0900_demod_num demod = state->demod;
-	int	lock = FALSE,
-		d = demod;
-	s32	srate,
-		search_range,
-		locktimeout,
-		currier_step,
-		nb_steps,
-		current_step,
-		direction,
-		tuner_freq,
-		timeout,
-		freq;
-
-	srate = intp->symbol_rate[d];
-	search_range = intp->srch_range[d];
-
-	if (srate >= 10000000)
-		locktimeout = demod_timeout / 3;
-	else
-		locktimeout = demod_timeout / 2;
-
-	lock = stv0900_get_demod_lock(intp, d, locktimeout);
-
-	if (lock != FALSE)
-		return lock;
-
-	if (srate >= 10000000) {
-		if (stv0900_check_timing_lock(intp, d) == TRUE) {
-			stv0900_write_reg(intp, DMDISTATE, 0x1f);
-			stv0900_write_reg(intp, DMDISTATE, 0x15);
-			lock = stv0900_get_demod_lock(intp, d, demod_timeout);
-		} else
-			lock = FALSE;
-
-		return lock;
-	}
-
-	if (intp->chip_id <= 0x20) {
-		if (srate <= 1000000)
-			currier_step = 500;
-		else if (srate <= 4000000)
-			currier_step = 1000;
-		else if (srate <= 7000000)
-			currier_step = 2000;
-		else if (srate <= 10000000)
-			currier_step = 3000;
-		else
-			currier_step = 5000;
-
-		if (srate >= 2000000) {
-			timeout = (demod_timeout / 3);
-			if (timeout > 1000)
-				timeout = 1000;
-		} else
-			timeout = (demod_timeout / 2);
-	} else {
-		/*cut 3.0 */
-		currier_step = srate / 4000;
-		timeout = (demod_timeout * 3) / 4;
-	}
-
-	nb_steps = ((search_range / 1000) / currier_step);
-
-	if ((nb_steps % 2) != 0)
-		nb_steps += 1;
-
-	if (nb_steps <= 0)
-		nb_steps = 2;
-	else if (nb_steps > 12)
-		nb_steps = 12;
-
-	current_step = 1;
-	direction = 1;
-
-	if (intp->chip_id <= 0x20) {
-		tuner_freq = intp->freq[d];
-		intp->bw[d] = stv0900_carrier_width(intp->symbol_rate[d],
-				intp->rolloff) + intp->symbol_rate[d];
-	} else
-		tuner_freq = 0;
-
-	while ((current_step <= nb_steps) && (lock == FALSE)) {
-		if (direction > 0)
-			tuner_freq += (current_step * currier_step);
-		else
-			tuner_freq -= (current_step * currier_step);
-
-		if (intp->chip_id <= 0x20) {
-			if (intp->tuner_type[d] == 3)
-				stv0900_set_tuner_auto(intp, tuner_freq,
-						intp->bw[d], demod);
-			else
-				stv0900_set_tuner(fe, tuner_freq, intp->bw[d]);
-
-			stv0900_write_reg(intp, DMDISTATE, 0x1c);
-			stv0900_write_reg(intp, CFRINIT1, 0);
-			stv0900_write_reg(intp, CFRINIT0, 0);
-			stv0900_write_reg(intp, DMDISTATE, 0x1f);
-			stv0900_write_reg(intp, DMDISTATE, 0x15);
-		} else {
-			stv0900_write_reg(intp, DMDISTATE, 0x1c);
-			freq = (tuner_freq * 65536) / (intp->mclk / 1000);
-			stv0900_write_bits(intp, CFR_INIT1, MSB(freq));
-			stv0900_write_bits(intp, CFR_INIT0, LSB(freq));
-			stv0900_write_reg(intp, DMDISTATE, 0x1f);
-			stv0900_write_reg(intp, DMDISTATE, 0x05);
-		}
-
-		lock = stv0900_get_demod_lock(intp, d, timeout);
-		direction *= -1;
-		current_step++;
-	}
-
-	return	lock;
-}
-
-static void stv0900_get_lock_timeout(s32 *demod_timeout, s32 *fec_timeout,
-					s32 srate,
-					enum fe_stv0900_search_algo algo)
-{
-	switch (algo) {
-	case STV0900_BLIND_SEARCH:
-		if (srate <= 1500000) {
-			(*demod_timeout) = 1500;
-			(*fec_timeout) = 400;
-		} else if (srate <= 5000000) {
-			(*demod_timeout) = 1000;
-			(*fec_timeout) = 300;
-		} else {
-			(*demod_timeout) = 700;
-			(*fec_timeout) = 100;
-		}
-
-		break;
-	case STV0900_COLD_START:
-	case STV0900_WARM_START:
-	default:
-		if (srate <= 1000000) {
-			(*demod_timeout) = 3000;
-			(*fec_timeout) = 1700;
-		} else if (srate <= 2000000) {
-			(*demod_timeout) = 2500;
-			(*fec_timeout) = 1100;
-		} else if (srate <= 5000000) {
-			(*demod_timeout) = 1000;
-			(*fec_timeout) = 550;
-		} else if (srate <= 10000000) {
-			(*demod_timeout) = 700;
-			(*fec_timeout) = 250;
-		} else if (srate <= 20000000) {
-			(*demod_timeout) = 400;
-			(*fec_timeout) = 130;
-		} else {
-			(*demod_timeout) = 300;
-			(*fec_timeout) = 100;
-		}
-
-		break;
-
-	}
-
-	if (algo == STV0900_WARM_START)
-		(*demod_timeout) /= 2;
-}
-
-static void stv0900_set_viterbi_tracq(struct stv0900_internal *intp,
-					enum fe_stv0900_demod_num demod)
-{
-
-	s32 vth_reg = VTH12;
-
-	dprintk("%s\n", __func__);
-
-	stv0900_write_reg(intp, vth_reg++, 0xd0);
-	stv0900_write_reg(intp, vth_reg++, 0x7d);
-	stv0900_write_reg(intp, vth_reg++, 0x53);
-	stv0900_write_reg(intp, vth_reg++, 0x2f);
-	stv0900_write_reg(intp, vth_reg++, 0x24);
-	stv0900_write_reg(intp, vth_reg++, 0x1f);
-}
-
-static void stv0900_set_viterbi_standard(struct stv0900_internal *intp,
-				   enum fe_stv0900_search_standard standard,
-				   enum fe_stv0900_fec fec,
-				   enum fe_stv0900_demod_num demod)
-{
-	dprintk("%s: ViterbiStandard = ", __func__);
-
-	switch (standard) {
-	case STV0900_AUTO_SEARCH:
-		dprintk("Auto\n");
-		stv0900_write_reg(intp, FECM, 0x10);
-		stv0900_write_reg(intp, PRVIT, 0x3f);
-		break;
-	case STV0900_SEARCH_DVBS1:
-		dprintk("DVBS1\n");
-		stv0900_write_reg(intp, FECM, 0x00);
-		switch (fec) {
-		case STV0900_FEC_UNKNOWN:
-		default:
-			stv0900_write_reg(intp, PRVIT, 0x2f);
-			break;
-		case STV0900_FEC_1_2:
-			stv0900_write_reg(intp, PRVIT, 0x01);
-			break;
-		case STV0900_FEC_2_3:
-			stv0900_write_reg(intp, PRVIT, 0x02);
-			break;
-		case STV0900_FEC_3_4:
-			stv0900_write_reg(intp, PRVIT, 0x04);
-			break;
-		case STV0900_FEC_5_6:
-			stv0900_write_reg(intp, PRVIT, 0x08);
-			break;
-		case STV0900_FEC_7_8:
-			stv0900_write_reg(intp, PRVIT, 0x20);
-			break;
-		}
-
-		break;
-	case STV0900_SEARCH_DSS:
-		dprintk("DSS\n");
-		stv0900_write_reg(intp, FECM, 0x80);
-		switch (fec) {
-		case STV0900_FEC_UNKNOWN:
-		default:
-			stv0900_write_reg(intp, PRVIT, 0x13);
-			break;
-		case STV0900_FEC_1_2:
-			stv0900_write_reg(intp, PRVIT, 0x01);
-			break;
-		case STV0900_FEC_2_3:
-			stv0900_write_reg(intp, PRVIT, 0x02);
-			break;
-		case STV0900_FEC_6_7:
-			stv0900_write_reg(intp, PRVIT, 0x10);
-			break;
-		}
-		break;
-	default:
-		break;
-	}
-}
-
-static enum fe_stv0900_fec stv0900_get_vit_fec(struct stv0900_internal *intp,
-						enum fe_stv0900_demod_num demod)
-{
-	enum fe_stv0900_fec prate;
-	s32 rate_fld = stv0900_get_bits(intp, VIT_CURPUN);
-
-	switch (rate_fld) {
-	case 13:
-		prate = STV0900_FEC_1_2;
-		break;
-	case 18:
-		prate = STV0900_FEC_2_3;
-		break;
-	case 21:
-		prate = STV0900_FEC_3_4;
-		break;
-	case 24:
-		prate = STV0900_FEC_5_6;
-		break;
-	case 25:
-		prate = STV0900_FEC_6_7;
-		break;
-	case 26:
-		prate = STV0900_FEC_7_8;
-		break;
-	default:
-		prate = STV0900_FEC_UNKNOWN;
-		break;
-	}
-
-	return prate;
-}
-
-static void stv0900_set_dvbs1_track_car_loop(struct stv0900_internal *intp,
-					enum fe_stv0900_demod_num demod,
-					u32 srate)
-{
-	if (intp->chip_id >= 0x30) {
-		if (srate >= 15000000) {
-			stv0900_write_reg(intp, ACLC, 0x2b);
-			stv0900_write_reg(intp, BCLC, 0x1a);
-		} else if ((srate >= 7000000) && (15000000 > srate)) {
-			stv0900_write_reg(intp, ACLC, 0x0c);
-			stv0900_write_reg(intp, BCLC, 0x1b);
-		} else if (srate < 7000000) {
-			stv0900_write_reg(intp, ACLC, 0x2c);
-			stv0900_write_reg(intp, BCLC, 0x1c);
-		}
-
-	} else { /*cut 2.0 and 1.x*/
-		stv0900_write_reg(intp, ACLC, 0x1a);
-		stv0900_write_reg(intp, BCLC, 0x09);
-	}
-
-}
-
-static void stv0900_track_optimization(struct dvb_frontend *fe)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *intp = state->internal;
-	enum fe_stv0900_demod_num demod = state->demod;
-
-	s32	srate,
-		pilots,
-		aclc,
-		freq1,
-		freq0,
-		i = 0,
-		timed,
-		timef,
-		blind_tun_sw = 0,
-		modulation;
-
-	enum fe_stv0900_modcode foundModcod;
-
-	dprintk("%s\n", __func__);
-
-	srate = stv0900_get_symbol_rate(intp, intp->mclk, demod);
-	srate += stv0900_get_timing_offst(intp, srate, demod);
-
-	switch (intp->result[demod].standard) {
-	case STV0900_DVBS1_STANDARD:
-	case STV0900_DSS_STANDARD:
-		dprintk("%s: found DVB-S or DSS\n", __func__);
-		if (intp->srch_standard[demod] == STV0900_AUTO_SEARCH) {
-			stv0900_write_bits(intp, DVBS1_ENABLE, 1);
-			stv0900_write_bits(intp, DVBS2_ENABLE, 0);
-		}
-
-		stv0900_write_bits(intp, ROLLOFF_CONTROL, intp->rolloff);
-		stv0900_write_bits(intp, MANUALSX_ROLLOFF, 1);
-
-		if (intp->chip_id < 0x30) {
-			stv0900_write_reg(intp, ERRCTRL1, 0x75);
-			break;
-		}
-
-		if (stv0900_get_vit_fec(intp, demod) == STV0900_FEC_1_2) {
-			stv0900_write_reg(intp, GAUSSR0, 0x98);
-			stv0900_write_reg(intp, CCIR0, 0x18);
-		} else {
-			stv0900_write_reg(intp, GAUSSR0, 0x18);
-			stv0900_write_reg(intp, CCIR0, 0x18);
-		}
-
-		stv0900_write_reg(intp, ERRCTRL1, 0x75);
-		break;
-	case STV0900_DVBS2_STANDARD:
-		dprintk("%s: found DVB-S2\n", __func__);
-		stv0900_write_bits(intp, DVBS1_ENABLE, 0);
-		stv0900_write_bits(intp, DVBS2_ENABLE, 1);
-		stv0900_write_reg(intp, ACLC, 0);
-		stv0900_write_reg(intp, BCLC, 0);
-		if (intp->result[demod].frame_len == STV0900_LONG_FRAME) {
-			foundModcod = stv0900_get_bits(intp, DEMOD_MODCOD);
-			pilots = stv0900_get_bits(intp, DEMOD_TYPE) & 0x01;
-			aclc = stv0900_get_optim_carr_loop(srate,
-							foundModcod,
-							pilots,
-							intp->chip_id);
-			if (foundModcod <= STV0900_QPSK_910)
-				stv0900_write_reg(intp, ACLC2S2Q, aclc);
-			else if (foundModcod <= STV0900_8PSK_910) {
-				stv0900_write_reg(intp, ACLC2S2Q, 0x2a);
-				stv0900_write_reg(intp, ACLC2S28, aclc);
-			}
-
-			if ((intp->demod_mode == STV0900_SINGLE) &&
-					(foundModcod > STV0900_8PSK_910)) {
-				if (foundModcod <= STV0900_16APSK_910) {
-					stv0900_write_reg(intp, ACLC2S2Q, 0x2a);
-					stv0900_write_reg(intp, ACLC2S216A,
-									aclc);
-				} else if (foundModcod <= STV0900_32APSK_910) {
-					stv0900_write_reg(intp, ACLC2S2Q, 0x2a);
-					stv0900_write_reg(intp,	ACLC2S232A,
-									aclc);
-				}
-			}
-
-		} else {
-			modulation = intp->result[demod].modulation;
-			aclc = stv0900_get_optim_short_carr_loop(srate,
-					modulation, intp->chip_id);
-			if (modulation == STV0900_QPSK)
-				stv0900_write_reg(intp, ACLC2S2Q, aclc);
-			else if (modulation == STV0900_8PSK) {
-				stv0900_write_reg(intp, ACLC2S2Q, 0x2a);
-				stv0900_write_reg(intp, ACLC2S28, aclc);
-			} else if (modulation == STV0900_16APSK) {
-				stv0900_write_reg(intp, ACLC2S2Q, 0x2a);
-				stv0900_write_reg(intp, ACLC2S216A, aclc);
-			} else if (modulation == STV0900_32APSK) {
-				stv0900_write_reg(intp, ACLC2S2Q, 0x2a);
-				stv0900_write_reg(intp, ACLC2S232A, aclc);
-			}
-
-		}
-
-		if (intp->chip_id <= 0x11) {
-			if (intp->demod_mode != STV0900_SINGLE)
-				stv0900_activate_s2_modcod(intp, demod);
-
-		}
-
-		stv0900_write_reg(intp, ERRCTRL1, 0x67);
-		break;
-	case STV0900_UNKNOWN_STANDARD:
-	default:
-		dprintk("%s: found unknown standard\n", __func__);
-		stv0900_write_bits(intp, DVBS1_ENABLE, 1);
-		stv0900_write_bits(intp, DVBS2_ENABLE, 1);
-		break;
-	}
-
-	freq1 = stv0900_read_reg(intp, CFR2);
-	freq0 = stv0900_read_reg(intp, CFR1);
-	if (intp->srch_algo[demod] == STV0900_BLIND_SEARCH) {
-		stv0900_write_reg(intp, SFRSTEP, 0x00);
-		stv0900_write_bits(intp, SCAN_ENABLE, 0);
-		stv0900_write_bits(intp, CFR_AUTOSCAN, 0);
-		stv0900_write_reg(intp, TMGCFG2, 0xc1);
-		stv0900_set_symbol_rate(intp, intp->mclk, srate, demod);
-		blind_tun_sw = 1;
-		if (intp->result[demod].standard != STV0900_DVBS2_STANDARD)
-			stv0900_set_dvbs1_track_car_loop(intp, demod, srate);
-
-	}
-
-	if (intp->chip_id >= 0x20) {
-		if ((intp->srch_standard[demod] == STV0900_SEARCH_DVBS1) ||
-				(intp->srch_standard[demod] ==
-							STV0900_SEARCH_DSS) ||
-				(intp->srch_standard[demod] ==
-							STV0900_AUTO_SEARCH)) {
-			stv0900_write_reg(intp, VAVSRVIT, 0x0a);
-			stv0900_write_reg(intp, VITSCALE, 0x0);
-		}
-	}
-
-	if (intp->chip_id < 0x20)
-		stv0900_write_reg(intp, CARHDR, 0x08);
-
-	if (intp->chip_id == 0x10)
-		stv0900_write_reg(intp, CORRELEXP, 0x0a);
-
-	stv0900_write_reg(intp, AGC2REF, 0x38);
-
-	if ((intp->chip_id >= 0x20) ||
-			(blind_tun_sw == 1) ||
-			(intp->symbol_rate[demod] < 10000000)) {
-		stv0900_write_reg(intp, CFRINIT1, freq1);
-		stv0900_write_reg(intp, CFRINIT0, freq0);
-		intp->bw[demod] = stv0900_carrier_width(srate,
-					intp->rolloff) + 10000000;
-
-		if ((intp->chip_id >= 0x20) || (blind_tun_sw == 1)) {
-			if (intp->srch_algo[demod] != STV0900_WARM_START) {
-				if (intp->tuner_type[demod] == 3)
-					stv0900_set_tuner_auto(intp,
-							intp->freq[demod],
-							intp->bw[demod],
-							demod);
-				else
-					stv0900_set_bandwidth(fe,
-							intp->bw[demod]);
-			}
-		}
-
-		if ((intp->srch_algo[demod] == STV0900_BLIND_SEARCH) ||
-				(intp->symbol_rate[demod] < 10000000))
-			msleep(50);
-		else
-			msleep(5);
-
-		stv0900_get_lock_timeout(&timed, &timef, srate,
-						STV0900_WARM_START);
-
-		if (stv0900_get_demod_lock(intp, demod, timed / 2) == FALSE) {
-			stv0900_write_reg(intp, DMDISTATE, 0x1f);
-			stv0900_write_reg(intp, CFRINIT1, freq1);
-			stv0900_write_reg(intp, CFRINIT0, freq0);
-			stv0900_write_reg(intp, DMDISTATE, 0x18);
-			i = 0;
-			while ((stv0900_get_demod_lock(intp,
-							demod,
-							timed / 2) == FALSE) &&
-						(i <= 2)) {
-				stv0900_write_reg(intp, DMDISTATE, 0x1f);
-				stv0900_write_reg(intp, CFRINIT1, freq1);
-				stv0900_write_reg(intp, CFRINIT0, freq0);
-				stv0900_write_reg(intp, DMDISTATE, 0x18);
-				i++;
-			}
-		}
-
-	}
-
-	if (intp->chip_id >= 0x20)
-		stv0900_write_reg(intp, CARFREQ, 0x49);
-
-	if ((intp->result[demod].standard == STV0900_DVBS1_STANDARD) ||
-			(intp->result[demod].standard == STV0900_DSS_STANDARD))
-		stv0900_set_viterbi_tracq(intp, demod);
-
-}
-
-static int stv0900_get_fec_lock(struct stv0900_internal *intp,
-				enum fe_stv0900_demod_num demod, s32 time_out)
-{
-	s32 timer = 0, lock = 0;
-
-	enum fe_stv0900_search_state dmd_state;
-
-	dprintk("%s\n", __func__);
-
-	dmd_state = stv0900_get_bits(intp, HEADER_MODE);
-
-	while ((timer < time_out) && (lock == 0)) {
-		switch (dmd_state) {
-		case STV0900_SEARCH:
-		case STV0900_PLH_DETECTED:
-		default:
-			lock = 0;
-			break;
-		case STV0900_DVBS2_FOUND:
-			lock = stv0900_get_bits(intp, PKTDELIN_LOCK);
-			break;
-		case STV0900_DVBS_FOUND:
-			lock = stv0900_get_bits(intp, LOCKEDVIT);
-			break;
-		}
-
-		if (lock == 0) {
-			msleep(10);
-			timer += 10;
-		}
-	}
-
-	if (lock)
-		dprintk("%s: DEMOD FEC LOCK OK\n", __func__);
-	else
-		dprintk("%s: DEMOD FEC LOCK FAIL\n", __func__);
-
-	return lock;
-}
-
-static int stv0900_wait_for_lock(struct stv0900_internal *intp,
-				enum fe_stv0900_demod_num demod,
-				s32 dmd_timeout, s32 fec_timeout)
-{
-
-	s32 timer = 0, lock = 0;
-
-	dprintk("%s\n", __func__);
-
-	lock = stv0900_get_demod_lock(intp, demod, dmd_timeout);
-
-	if (lock)
-		lock = lock && stv0900_get_fec_lock(intp, demod, fec_timeout);
-
-	if (lock) {
-		lock = 0;
-
-		dprintk("%s: Timer = %d, time_out = %d\n",
-				__func__, timer, fec_timeout);
-
-		while ((timer < fec_timeout) && (lock == 0)) {
-			lock = stv0900_get_bits(intp, TSFIFO_LINEOK);
-			msleep(1);
-			timer++;
-		}
-	}
-
-	if (lock)
-		dprintk("%s: DEMOD LOCK OK\n", __func__);
-	else
-		dprintk("%s: DEMOD LOCK FAIL\n", __func__);
-
-	if (lock)
-		return TRUE;
-	else
-		return FALSE;
-}
-
-enum fe_stv0900_tracking_standard stv0900_get_standard(struct dvb_frontend *fe,
-						enum fe_stv0900_demod_num demod)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *intp = state->internal;
-	enum fe_stv0900_tracking_standard fnd_standard;
-
-	int hdr_mode = stv0900_get_bits(intp, HEADER_MODE);
-
-	switch (hdr_mode) {
-	case 2:
-		fnd_standard = STV0900_DVBS2_STANDARD;
-		break;
-	case 3:
-		if (stv0900_get_bits(intp, DSS_DVB) == 1)
-			fnd_standard = STV0900_DSS_STANDARD;
-		else
-			fnd_standard = STV0900_DVBS1_STANDARD;
-
-		break;
-	default:
-		fnd_standard = STV0900_UNKNOWN_STANDARD;
-	}
-
-	dprintk("%s: standard %d\n", __func__, fnd_standard);
-
-	return fnd_standard;
-}
-
-static s32 stv0900_get_carr_freq(struct stv0900_internal *intp, u32 mclk,
-					enum fe_stv0900_demod_num demod)
-{
-	s32	derot,
-		rem1,
-		rem2,
-		intval1,
-		intval2;
-
-	derot = (stv0900_get_bits(intp, CAR_FREQ2) << 16) +
-		(stv0900_get_bits(intp, CAR_FREQ1) << 8) +
-		(stv0900_get_bits(intp, CAR_FREQ0));
-
-	derot = ge2comp(derot, 24);
-	intval1 = mclk >> 12;
-	intval2 = derot >> 12;
-	rem1 = mclk % 0x1000;
-	rem2 = derot % 0x1000;
-	derot = (intval1 * intval2) +
-		((intval1 * rem2) >> 12) +
-		((intval2 * rem1) >> 12);
-
-	return derot;
-}
-
-static u32 stv0900_get_tuner_freq(struct dvb_frontend *fe)
-{
-	struct dvb_frontend_ops	*frontend_ops = NULL;
-	struct dvb_tuner_ops *tuner_ops = NULL;
-	u32 freq = 0;
-
-	if (&fe->ops)
-		frontend_ops = &fe->ops;
-
-	if (&frontend_ops->tuner_ops)
-		tuner_ops = &frontend_ops->tuner_ops;
-
-	if (tuner_ops->get_frequency) {
-		if ((tuner_ops->get_frequency(fe, &freq)) < 0)
-			dprintk("%s: Invalid parameter\n", __func__);
-		else
-			dprintk("%s: Frequency=%d\n", __func__, freq);
-
-	}
-
-	return freq;
-}
-
-static enum
-fe_stv0900_signal_type stv0900_get_signal_params(struct dvb_frontend *fe)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *intp = state->internal;
-	enum fe_stv0900_demod_num demod = state->demod;
-	enum fe_stv0900_signal_type range = STV0900_OUTOFRANGE;
-	struct stv0900_signal_info *result = &intp->result[demod];
-	s32	offsetFreq,
-		srate_offset;
-	int	i = 0,
-		d = demod;
-
-	u8 timing;
-
-	msleep(5);
-	if (intp->srch_algo[d] == STV0900_BLIND_SEARCH) {
-		timing = stv0900_read_reg(intp, TMGREG2);
-		i = 0;
-		stv0900_write_reg(intp, SFRSTEP, 0x5c);
-
-		while ((i <= 50) && (timing != 0) && (timing != 0xff)) {
-			timing = stv0900_read_reg(intp, TMGREG2);
-			msleep(5);
-			i += 5;
-		}
-	}
-
-	result->standard = stv0900_get_standard(fe, d);
-	if (intp->tuner_type[demod] == 3)
-		result->frequency = stv0900_get_freq_auto(intp, d);
-	else
-		result->frequency = stv0900_get_tuner_freq(fe);
-
-	offsetFreq = stv0900_get_carr_freq(intp, intp->mclk, d) / 1000;
-	result->frequency += offsetFreq;
-	result->symbol_rate = stv0900_get_symbol_rate(intp, intp->mclk, d);
-	srate_offset = stv0900_get_timing_offst(intp, result->symbol_rate, d);
-	result->symbol_rate += srate_offset;
-	result->fec = stv0900_get_vit_fec(intp, d);
-	result->modcode = stv0900_get_bits(intp, DEMOD_MODCOD);
-	result->pilot = stv0900_get_bits(intp, DEMOD_TYPE) & 0x01;
-	result->frame_len = ((u32)stv0900_get_bits(intp, DEMOD_TYPE)) >> 1;
-	result->rolloff = stv0900_get_bits(intp, ROLLOFF_STATUS);
-
-	dprintk("%s: modcode=0x%x \n", __func__, result->modcode);
-
-	switch (result->standard) {
-	case STV0900_DVBS2_STANDARD:
-		result->spectrum = stv0900_get_bits(intp, SPECINV_DEMOD);
-		if (result->modcode <= STV0900_QPSK_910)
-			result->modulation = STV0900_QPSK;
-		else if (result->modcode <= STV0900_8PSK_910)
-			result->modulation = STV0900_8PSK;
-		else if (result->modcode <= STV0900_16APSK_910)
-			result->modulation = STV0900_16APSK;
-		else if (result->modcode <= STV0900_32APSK_910)
-			result->modulation = STV0900_32APSK;
-		else
-			result->modulation = STV0900_UNKNOWN;
-		break;
-	case STV0900_DVBS1_STANDARD:
-	case STV0900_DSS_STANDARD:
-		result->spectrum = stv0900_get_bits(intp, IQINV);
-		result->modulation = STV0900_QPSK;
-		break;
-	default:
-		break;
-	}
-
-	if ((intp->srch_algo[d] == STV0900_BLIND_SEARCH) ||
-				(intp->symbol_rate[d] < 10000000)) {
-		offsetFreq = result->frequency - intp->freq[d];
-		if (intp->tuner_type[demod] == 3)
-			intp->freq[d] = stv0900_get_freq_auto(intp, d);
-		else
-			intp->freq[d] = stv0900_get_tuner_freq(fe);
-
-		if (ABS(offsetFreq) <= ((intp->srch_range[d] / 2000) + 500))
-			range = STV0900_RANGEOK;
-		else if (ABS(offsetFreq) <=
-				(stv0900_carrier_width(result->symbol_rate,
-						result->rolloff) / 2000))
-			range = STV0900_RANGEOK;
-
-	} else if (ABS(offsetFreq) <= ((intp->srch_range[d] / 2000) + 500))
-		range = STV0900_RANGEOK;
-
-	dprintk("%s: range %d\n", __func__, range);
-
-	return range;
-}
-
-static enum
-fe_stv0900_signal_type stv0900_dvbs1_acq_workaround(struct dvb_frontend *fe)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *intp = state->internal;
-	enum fe_stv0900_demod_num demod = state->demod;
-	enum fe_stv0900_signal_type signal_type = STV0900_NODATA;
-
-	s32	srate,
-		demod_timeout,
-		fec_timeout,
-		freq1,
-		freq0;
-
-	intp->result[demod].locked = FALSE;
-
-	if (stv0900_get_bits(intp, HEADER_MODE) == STV0900_DVBS_FOUND) {
-		srate = stv0900_get_symbol_rate(intp, intp->mclk, demod);
-		srate += stv0900_get_timing_offst(intp, srate, demod);
-		if (intp->srch_algo[demod] == STV0900_BLIND_SEARCH)
-			stv0900_set_symbol_rate(intp, intp->mclk, srate, demod);
-
-		stv0900_get_lock_timeout(&demod_timeout, &fec_timeout,
-					srate, STV0900_WARM_START);
-		freq1 = stv0900_read_reg(intp, CFR2);
-		freq0 = stv0900_read_reg(intp, CFR1);
-		stv0900_write_bits(intp, CFR_AUTOSCAN, 0);
-		stv0900_write_bits(intp, SPECINV_CONTROL,
-					STV0900_IQ_FORCE_SWAPPED);
-		stv0900_write_reg(intp, DMDISTATE, 0x1c);
-		stv0900_write_reg(intp, CFRINIT1, freq1);
-		stv0900_write_reg(intp, CFRINIT0, freq0);
-		stv0900_write_reg(intp, DMDISTATE, 0x18);
-		if (stv0900_wait_for_lock(intp, demod,
-				demod_timeout, fec_timeout) == TRUE) {
-			intp->result[demod].locked = TRUE;
-			signal_type = stv0900_get_signal_params(fe);
-			stv0900_track_optimization(fe);
-		} else {
-			stv0900_write_bits(intp, SPECINV_CONTROL,
-					STV0900_IQ_FORCE_NORMAL);
-			stv0900_write_reg(intp, DMDISTATE, 0x1c);
-			stv0900_write_reg(intp, CFRINIT1, freq1);
-			stv0900_write_reg(intp, CFRINIT0, freq0);
-			stv0900_write_reg(intp, DMDISTATE, 0x18);
-			if (stv0900_wait_for_lock(intp, demod,
-					demod_timeout, fec_timeout) == TRUE) {
-				intp->result[demod].locked = TRUE;
-				signal_type = stv0900_get_signal_params(fe);
-				stv0900_track_optimization(fe);
-			}
-
-		}
-
-	} else
-		intp->result[demod].locked = FALSE;
-
-	return signal_type;
-}
-
-static u16 stv0900_blind_check_agc2_min_level(struct stv0900_internal *intp,
-					enum fe_stv0900_demod_num demod)
-{
-	u32 minagc2level = 0xffff,
-		agc2level,
-		init_freq, freq_step;
-
-	s32 i, j, nb_steps, direction;
-
-	dprintk("%s\n", __func__);
-
-	stv0900_write_reg(intp, AGC2REF, 0x38);
-	stv0900_write_bits(intp, SCAN_ENABLE, 0);
-	stv0900_write_bits(intp, CFR_AUTOSCAN, 0);
-
-	stv0900_write_bits(intp, AUTO_GUP, 1);
-	stv0900_write_bits(intp, AUTO_GLOW, 1);
-
-	stv0900_write_reg(intp, DMDT0M, 0x0);
-
-	stv0900_set_symbol_rate(intp, intp->mclk, 1000000, demod);
-	nb_steps = -1 + (intp->srch_range[demod] / 1000000);
-	nb_steps /= 2;
-	nb_steps = (2 * nb_steps) + 1;
-
-	if (nb_steps < 0)
-		nb_steps = 1;
-
-	direction = 1;
-
-	freq_step = (1000000 << 8) / (intp->mclk >> 8);
-
-	init_freq = 0;
-
-	for (i = 0; i < nb_steps; i++) {
-		if (direction > 0)
-			init_freq = init_freq + (freq_step * i);
-		else
-			init_freq = init_freq - (freq_step * i);
-
-		direction *= -1;
-		stv0900_write_reg(intp, DMDISTATE, 0x5C);
-		stv0900_write_reg(intp, CFRINIT1, (init_freq >> 8) & 0xff);
-		stv0900_write_reg(intp, CFRINIT0, init_freq  & 0xff);
-		stv0900_write_reg(intp, DMDISTATE, 0x58);
-		msleep(10);
-		agc2level = 0;
-
-		for (j = 0; j < 10; j++)
-			agc2level += (stv0900_read_reg(intp, AGC2I1) << 8)
-					| stv0900_read_reg(intp, AGC2I0);
-
-		agc2level /= 10;
-
-		if (agc2level < minagc2level)
-			minagc2level = agc2level;
-
-	}
-
-	return (u16)minagc2level;
-}
-
-static u32 stv0900_search_srate_coarse(struct dvb_frontend *fe)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *intp = state->internal;
-	enum fe_stv0900_demod_num demod = state->demod;
-	int timing_lck = FALSE;
-	s32 i, timingcpt = 0,
-		direction = 1,
-		nb_steps,
-		current_step = 0,
-		tuner_freq;
-	u32 agc2_th,
-		coarse_srate = 0,
-		agc2_integr = 0,
-		currier_step = 1200;
-
-	if (intp->chip_id >= 0x30)
-		agc2_th = 0x2e00;
-	else
-		agc2_th = 0x1f00;
-
-	stv0900_write_bits(intp, DEMOD_MODE, 0x1f);
-	stv0900_write_reg(intp, TMGCFG, 0x12);
-	stv0900_write_reg(intp, TMGTHRISE, 0xf0);
-	stv0900_write_reg(intp, TMGTHFALL, 0xe0);
-	stv0900_write_bits(intp, SCAN_ENABLE, 1);
-	stv0900_write_bits(intp, CFR_AUTOSCAN, 1);
-	stv0900_write_reg(intp, SFRUP1, 0x83);
-	stv0900_write_reg(intp, SFRUP0, 0xc0);
-	stv0900_write_reg(intp, SFRLOW1, 0x82);
-	stv0900_write_reg(intp, SFRLOW0, 0xa0);
-	stv0900_write_reg(intp, DMDT0M, 0x0);
-	stv0900_write_reg(intp, AGC2REF, 0x50);
-
-	if (intp->chip_id >= 0x30) {
-		stv0900_write_reg(intp, CARFREQ, 0x99);
-		stv0900_write_reg(intp, SFRSTEP, 0x98);
-	} else if (intp->chip_id >= 0x20) {
-		stv0900_write_reg(intp, CARFREQ, 0x6a);
-		stv0900_write_reg(intp, SFRSTEP, 0x95);
-	} else {
-		stv0900_write_reg(intp, CARFREQ, 0xed);
-		stv0900_write_reg(intp, SFRSTEP, 0x73);
-	}
-
-	if (intp->symbol_rate[demod] <= 2000000)
-		currier_step = 1000;
-	else if (intp->symbol_rate[demod] <= 5000000)
-		currier_step = 2000;
-	else if (intp->symbol_rate[demod] <= 12000000)
-		currier_step = 3000;
-	else
-			currier_step = 5000;
-
-	nb_steps = -1 + ((intp->srch_range[demod] / 1000) / currier_step);
-	nb_steps /= 2;
-	nb_steps = (2 * nb_steps) + 1;
-
-	if (nb_steps < 0)
-		nb_steps = 1;
-	else if (nb_steps > 10) {
-		nb_steps = 11;
-		currier_step = (intp->srch_range[demod] / 1000) / 10;
-	}
-
-	current_step = 0;
-	direction = 1;
-
-	tuner_freq = intp->freq[demod];
-
-	while ((timing_lck == FALSE) && (current_step < nb_steps)) {
-		stv0900_write_reg(intp, DMDISTATE, 0x5f);
-		stv0900_write_bits(intp, DEMOD_MODE, 0);
-
-		msleep(50);
-
-		for (i = 0; i < 10; i++) {
-			if (stv0900_get_bits(intp, TMGLOCK_QUALITY) >= 2)
-				timingcpt++;
-
-			agc2_integr += (stv0900_read_reg(intp, AGC2I1) << 8) |
-					stv0900_read_reg(intp, AGC2I0);
-		}
-
-		agc2_integr /= 10;
-		coarse_srate = stv0900_get_symbol_rate(intp, intp->mclk, demod);
-		current_step++;
-		direction *= -1;
-
-		dprintk("lock: I2C_DEMOD_MODE_FIELD =0. Search started."
-			" tuner freq=%d agc2=0x%x srate_coarse=%d tmg_cpt=%d\n",
-			tuner_freq, agc2_integr, coarse_srate, timingcpt);
-
-		if ((timingcpt >= 5) &&
-				(agc2_integr < agc2_th) &&
-				(coarse_srate < 55000000) &&
-				(coarse_srate > 850000))
-			timing_lck = TRUE;
-		else if (current_step < nb_steps) {
-			if (direction > 0)
-				tuner_freq += (current_step * currier_step);
-			else
-				tuner_freq -= (current_step * currier_step);
-
-			if (intp->tuner_type[demod] == 3)
-				stv0900_set_tuner_auto(intp, tuner_freq,
-						intp->bw[demod], demod);
-			else
-				stv0900_set_tuner(fe, tuner_freq,
-						intp->bw[demod]);
-		}
-	}
-
-	if (timing_lck == FALSE)
-		coarse_srate = 0;
-	else
-		coarse_srate = stv0900_get_symbol_rate(intp, intp->mclk, demod);
-
-	return coarse_srate;
-}
-
-static u32 stv0900_search_srate_fine(struct dvb_frontend *fe)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *intp = state->internal;
-	enum fe_stv0900_demod_num demod = state->demod;
-	u32	coarse_srate,
-		coarse_freq,
-		symb,
-		symbmax,
-		symbmin,
-		symbcomp;
-
-	coarse_srate = stv0900_get_symbol_rate(intp, intp->mclk, demod);
-
-	if (coarse_srate > 3000000) {
-		symbmax = 13 * (coarse_srate / 10);
-		symbmax = (symbmax / 1000) * 65536;
-		symbmax /= (intp->mclk / 1000);
-
-		symbmin = 10 * (coarse_srate / 13);
-		symbmin = (symbmin / 1000)*65536;
-		symbmin /= (intp->mclk / 1000);
-
-		symb = (coarse_srate / 1000) * 65536;
-		symb /= (intp->mclk / 1000);
-	} else {
-		symbmax = 13 * (coarse_srate / 10);
-		symbmax = (symbmax / 100) * 65536;
-		symbmax /= (intp->mclk / 100);
-
-		symbmin = 10 * (coarse_srate / 14);
-		symbmin = (symbmin / 100) * 65536;
-		symbmin /= (intp->mclk / 100);
-
-		symb = (coarse_srate / 100) * 65536;
-		symb /= (intp->mclk / 100);
-	}
-
-	symbcomp = 13 * (coarse_srate / 10);
-		coarse_freq = (stv0900_read_reg(intp, CFR2) << 8)
-					| stv0900_read_reg(intp, CFR1);
-
-	if (symbcomp < intp->symbol_rate[demod])
-		coarse_srate = 0;
-	else {
-		stv0900_write_reg(intp, DMDISTATE, 0x1f);
-		stv0900_write_reg(intp, TMGCFG2, 0xc1);
-		stv0900_write_reg(intp, TMGTHRISE, 0x20);
-		stv0900_write_reg(intp, TMGTHFALL, 0x00);
-		stv0900_write_reg(intp, TMGCFG, 0xd2);
-		stv0900_write_bits(intp, CFR_AUTOSCAN, 0);
-		stv0900_write_reg(intp, AGC2REF, 0x38);
-
-		if (intp->chip_id >= 0x30)
-			stv0900_write_reg(intp, CARFREQ, 0x79);
-		else if (intp->chip_id >= 0x20)
-			stv0900_write_reg(intp, CARFREQ, 0x49);
-		else
-			stv0900_write_reg(intp, CARFREQ, 0xed);
-
-		stv0900_write_reg(intp, SFRUP1, (symbmax >> 8) & 0x7f);
-		stv0900_write_reg(intp, SFRUP0, (symbmax & 0xff));
-
-		stv0900_write_reg(intp, SFRLOW1, (symbmin >> 8) & 0x7f);
-		stv0900_write_reg(intp, SFRLOW0, (symbmin & 0xff));
-
-		stv0900_write_reg(intp, SFRINIT1, (symb >> 8) & 0xff);
-		stv0900_write_reg(intp, SFRINIT0, (symb & 0xff));
-
-		stv0900_write_reg(intp, DMDT0M, 0x20);
-		stv0900_write_reg(intp, CFRINIT1, (coarse_freq >> 8) & 0xff);
-		stv0900_write_reg(intp, CFRINIT0, coarse_freq  & 0xff);
-		stv0900_write_reg(intp, DMDISTATE, 0x15);
-	}
-
-	return coarse_srate;
-}
-
-static int stv0900_blind_search_algo(struct dvb_frontend *fe)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *intp = state->internal;
-	enum fe_stv0900_demod_num demod = state->demod;
-	u8	k_ref_tmg,
-		k_ref_tmg_max,
-		k_ref_tmg_min;
-	u32	coarse_srate,
-		agc2_th;
-	int	lock = FALSE,
-		coarse_fail = FALSE;
-	s32	demod_timeout = 500,
-		fec_timeout = 50,
-		fail_cpt,
-		i,
-		agc2_overflow;
-	u16	agc2_int;
-	u8	dstatus2;
-
-	dprintk("%s\n", __func__);
-
-	if (intp->chip_id < 0x20) {
-		k_ref_tmg_max = 233;
-		k_ref_tmg_min = 143;
-	} else {
-		k_ref_tmg_max = 110;
-		k_ref_tmg_min = 10;
-	}
-
-	if (intp->chip_id <= 0x20)
-		agc2_th = STV0900_BLIND_SEARCH_AGC2_TH;
-	else
-		agc2_th = STV0900_BLIND_SEARCH_AGC2_TH_CUT30;
-
-	agc2_int = stv0900_blind_check_agc2_min_level(intp, demod);
-
-	dprintk("%s agc2_int=%d agc2_th=%d \n", __func__, agc2_int, agc2_th);
-	if (agc2_int > agc2_th)
-		return FALSE;
-
-	if (intp->chip_id == 0x10)
-		stv0900_write_reg(intp, CORRELEXP, 0xaa);
-
-	if (intp->chip_id < 0x20)
-		stv0900_write_reg(intp, CARHDR, 0x55);
-	else
-		stv0900_write_reg(intp, CARHDR, 0x20);
-
-	if (intp->chip_id <= 0x20)
-		stv0900_write_reg(intp, CARCFG, 0xc4);
-	else
-		stv0900_write_reg(intp, CARCFG, 0x6);
-
-	stv0900_write_reg(intp, RTCS2, 0x44);
-
-	if (intp->chip_id >= 0x20) {
-		stv0900_write_reg(intp, EQUALCFG, 0x41);
-		stv0900_write_reg(intp, FFECFG, 0x41);
-		stv0900_write_reg(intp, VITSCALE, 0x82);
-		stv0900_write_reg(intp, VAVSRVIT, 0x0);
-	}
-
-	k_ref_tmg = k_ref_tmg_max;
-
-	do {
-		stv0900_write_reg(intp, KREFTMG, k_ref_tmg);
-		if (stv0900_search_srate_coarse(fe) != 0) {
-			coarse_srate = stv0900_search_srate_fine(fe);
-
-			if (coarse_srate != 0) {
-				stv0900_get_lock_timeout(&demod_timeout,
-							&fec_timeout,
-							coarse_srate,
-							STV0900_BLIND_SEARCH);
-				lock = stv0900_get_demod_lock(intp,
-							demod,
-							demod_timeout);
-			} else
-				lock = FALSE;
-		} else {
-			fail_cpt = 0;
-			agc2_overflow = 0;
-
-			for (i = 0; i < 10; i++) {
-				agc2_int = (stv0900_read_reg(intp, AGC2I1) << 8)
-					| stv0900_read_reg(intp, AGC2I0);
-
-				if (agc2_int >= 0xff00)
-					agc2_overflow++;
-
-				dstatus2 = stv0900_read_reg(intp, DSTATUS2);
-
-				if (((dstatus2 & 0x1) == 0x1) &&
-						((dstatus2 >> 7) == 1))
-					fail_cpt++;
-			}
-
-			if ((fail_cpt > 7) || (agc2_overflow > 7))
-				coarse_fail = TRUE;
-
-			lock = FALSE;
-		}
-		k_ref_tmg -= 30;
-	} while ((k_ref_tmg >= k_ref_tmg_min) &&
-				(lock == FALSE) &&
-				(coarse_fail == FALSE));
-
-	return lock;
-}
-
-static void stv0900_set_viterbi_acq(struct stv0900_internal *intp,
-					enum fe_stv0900_demod_num demod)
-{
-	s32 vth_reg = VTH12;
-
-	dprintk("%s\n", __func__);
-
-	stv0900_write_reg(intp, vth_reg++, 0x96);
-	stv0900_write_reg(intp, vth_reg++, 0x64);
-	stv0900_write_reg(intp, vth_reg++, 0x36);
-	stv0900_write_reg(intp, vth_reg++, 0x23);
-	stv0900_write_reg(intp, vth_reg++, 0x1e);
-	stv0900_write_reg(intp, vth_reg++, 0x19);
-}
-
-static void stv0900_set_search_standard(struct stv0900_internal *intp,
-					enum fe_stv0900_demod_num demod)
-{
-
-	dprintk("%s\n", __func__);
-
-	switch (intp->srch_standard[demod]) {
-	case STV0900_SEARCH_DVBS1:
-		dprintk("Search Standard = DVBS1\n");
-		break;
-	case STV0900_SEARCH_DSS:
-		dprintk("Search Standard = DSS\n");
-	case STV0900_SEARCH_DVBS2:
-		break;
-		dprintk("Search Standard = DVBS2\n");
-	case STV0900_AUTO_SEARCH:
-	default:
-		dprintk("Search Standard = AUTO\n");
-		break;
-	}
-
-	switch (intp->srch_standard[demod]) {
-	case STV0900_SEARCH_DVBS1:
-	case STV0900_SEARCH_DSS:
-		stv0900_write_bits(intp, DVBS1_ENABLE, 1);
-		stv0900_write_bits(intp, DVBS2_ENABLE, 0);
-		stv0900_write_bits(intp, STOP_CLKVIT, 0);
-		stv0900_set_dvbs1_track_car_loop(intp,
-						demod,
-						intp->symbol_rate[demod]);
-		stv0900_write_reg(intp, CAR2CFG, 0x22);
-
-		stv0900_set_viterbi_acq(intp, demod);
-		stv0900_set_viterbi_standard(intp,
-					intp->srch_standard[demod],
-					intp->fec[demod], demod);
-
-		break;
-	case STV0900_SEARCH_DVBS2:
-		stv0900_write_bits(intp, DVBS1_ENABLE, 0);
-		stv0900_write_bits(intp, DVBS2_ENABLE, 1);
-		stv0900_write_bits(intp, STOP_CLKVIT, 1);
-		stv0900_write_reg(intp, ACLC, 0x1a);
-		stv0900_write_reg(intp, BCLC, 0x09);
-		if (intp->chip_id <= 0x20) /*cut 1.x and 2.0*/
-			stv0900_write_reg(intp, CAR2CFG, 0x26);
-		else
-			stv0900_write_reg(intp, CAR2CFG, 0x66);
-
-		if (intp->demod_mode != STV0900_SINGLE) {
-			if (intp->chip_id <= 0x11)
-				stv0900_stop_all_s2_modcod(intp, demod);
-			else
-				stv0900_activate_s2_modcod(intp, demod);
-
-		} else
-			stv0900_activate_s2_modcod_single(intp, demod);
-
-		stv0900_set_viterbi_tracq(intp, demod);
-
-		break;
-	case STV0900_AUTO_SEARCH:
-	default:
-		stv0900_write_bits(intp, DVBS1_ENABLE, 1);
-		stv0900_write_bits(intp, DVBS2_ENABLE, 1);
-		stv0900_write_bits(intp, STOP_CLKVIT, 0);
-		stv0900_write_reg(intp, ACLC, 0x1a);
-		stv0900_write_reg(intp, BCLC, 0x09);
-		stv0900_set_dvbs1_track_car_loop(intp,
-						demod,
-						intp->symbol_rate[demod]);
-		if (intp->chip_id <= 0x20) /*cut 1.x and 2.0*/
-			stv0900_write_reg(intp, CAR2CFG, 0x26);
-		else
-			stv0900_write_reg(intp, CAR2CFG, 0x66);
-
-		if (intp->demod_mode != STV0900_SINGLE) {
-			if (intp->chip_id <= 0x11)
-				stv0900_stop_all_s2_modcod(intp, demod);
-			else
-				stv0900_activate_s2_modcod(intp, demod);
-
-		} else
-			stv0900_activate_s2_modcod_single(intp, demod);
-
-		stv0900_set_viterbi_tracq(intp, demod);
-		stv0900_set_viterbi_standard(intp,
-						intp->srch_standard[demod],
-						intp->fec[demod], demod);
-
-		break;
-	}
-}
-
-enum fe_stv0900_signal_type stv0900_algo(struct dvb_frontend *fe)
-{
-	struct stv0900_state *state = fe->demodulator_priv;
-	struct stv0900_internal *intp = state->internal;
-	enum fe_stv0900_demod_num demod = state->demod;
-
-	s32 demod_timeout = 500, fec_timeout = 50;
-	s32 aq_power, agc1_power, i;
-
-	int lock = FALSE, low_sr = FALSE;
-
-	enum fe_stv0900_signal_type signal_type = STV0900_NOCARRIER;
-	enum fe_stv0900_search_algo algo;
-	int no_signal = FALSE;
-
-	dprintk("%s\n", __func__);
-
-	algo = intp->srch_algo[demod];
-	stv0900_write_bits(intp, RST_HWARE, 1);
-	stv0900_write_reg(intp, DMDISTATE, 0x5c);
-	if (intp->chip_id >= 0x20) {
-		if (intp->symbol_rate[demod] > 5000000)
-			stv0900_write_reg(intp, CORRELABS, 0x9e);
-		else
-			stv0900_write_reg(intp, CORRELABS, 0x82);
-	} else
-		stv0900_write_reg(intp, CORRELABS, 0x88);
-
-	stv0900_get_lock_timeout(&demod_timeout, &fec_timeout,
-				intp->symbol_rate[demod],
-				intp->srch_algo[demod]);
-
-	if (intp->srch_algo[demod] == STV0900_BLIND_SEARCH) {
-		intp->bw[demod] = 2 * 36000000;
-
-		stv0900_write_reg(intp, TMGCFG2, 0xc0);
-		stv0900_write_reg(intp, CORRELMANT, 0x70);
-
-		stv0900_set_symbol_rate(intp, intp->mclk, 1000000, demod);
-	} else {
-		stv0900_write_reg(intp, DMDT0M, 0x20);
-		stv0900_write_reg(intp, TMGCFG, 0xd2);
-
-		if (intp->symbol_rate[demod] < 2000000)
-			stv0900_write_reg(intp, CORRELMANT, 0x63);
-		else
-			stv0900_write_reg(intp, CORRELMANT, 0x70);
-
-		stv0900_write_reg(intp, AGC2REF, 0x38);
-
-		intp->bw[demod] =
-				stv0900_carrier_width(intp->symbol_rate[demod],
-								intp->rolloff);
-		if (intp->chip_id >= 0x20) {
-			stv0900_write_reg(intp, KREFTMG, 0x5a);
-
-			if (intp->srch_algo[demod] == STV0900_COLD_START) {
-				intp->bw[demod] += 10000000;
-				intp->bw[demod] *= 15;
-				intp->bw[demod] /= 10;
-			} else if (intp->srch_algo[demod] == STV0900_WARM_START)
-				intp->bw[demod] += 10000000;
-
-		} else {
-			stv0900_write_reg(intp, KREFTMG, 0xc1);
-			intp->bw[demod] += 10000000;
-			intp->bw[demod] *= 15;
-			intp->bw[demod] /= 10;
-		}
-
-		stv0900_write_reg(intp, TMGCFG2, 0xc1);
-
-		stv0900_set_symbol_rate(intp, intp->mclk,
-					intp->symbol_rate[demod], demod);
-		stv0900_set_max_symbol_rate(intp, intp->mclk,
-					intp->symbol_rate[demod], demod);
-		stv0900_set_min_symbol_rate(intp, intp->mclk,
-					intp->symbol_rate[demod], demod);
-		if (intp->symbol_rate[demod] >= 10000000)
-			low_sr = FALSE;
-		else
-			low_sr = TRUE;
-
-	}
-
-	if (intp->tuner_type[demod] == 3)
-		stv0900_set_tuner_auto(intp, intp->freq[demod],
-				intp->bw[demod], demod);
-	else
-		stv0900_set_tuner(fe, intp->freq[demod], intp->bw[demod]);
-
-	agc1_power = MAKEWORD(stv0900_get_bits(intp, AGCIQ_VALUE1),
-				stv0900_get_bits(intp, AGCIQ_VALUE0));
-
-	aq_power = 0;
-
-	if (agc1_power == 0) {
-		for (i = 0; i < 5; i++)
-			aq_power += (stv0900_get_bits(intp, POWER_I) +
-					stv0900_get_bits(intp, POWER_Q)) / 2;
-
-		aq_power /= 5;
-	}
-
-	if ((agc1_power == 0) && (aq_power < IQPOWER_THRESHOLD)) {
-		intp->result[demod].locked = FALSE;
-		signal_type = STV0900_NOAGC1;
-		dprintk("%s: NO AGC1, POWERI, POWERQ\n", __func__);
-	} else {
-		stv0900_write_bits(intp, SPECINV_CONTROL,
-					intp->srch_iq_inv[demod]);
-		if (intp->chip_id <= 0x20) /*cut 2.0*/
-			stv0900_write_bits(intp, MANUALSX_ROLLOFF, 1);
-		else /*cut 3.0*/
-			stv0900_write_bits(intp, MANUALS2_ROLLOFF, 1);
-
-		stv0900_set_search_standard(intp, demod);
-
-		if (intp->srch_algo[demod] != STV0900_BLIND_SEARCH)
-			stv0900_start_search(intp, demod);
-	}
-
-	if (signal_type == STV0900_NOAGC1)
-		return signal_type;
-
-	if (intp->chip_id == 0x12) {
-		stv0900_write_bits(intp, RST_HWARE, 0);
-		msleep(3);
-		stv0900_write_bits(intp, RST_HWARE, 1);
-		stv0900_write_bits(intp, RST_HWARE, 0);
-	}
-
-	if (algo == STV0900_BLIND_SEARCH)
-		lock = stv0900_blind_search_algo(fe);
-	else if (algo == STV0900_COLD_START)
-		lock = stv0900_get_demod_cold_lock(fe, demod_timeout);
-	else if (algo == STV0900_WARM_START)
-		lock = stv0900_get_demod_lock(intp, demod, demod_timeout);
-
-	if ((lock == FALSE) && (algo == STV0900_COLD_START)) {
-		if (low_sr == FALSE) {
-			if (stv0900_check_timing_lock(intp, demod) == TRUE)
-				lock = stv0900_sw_algo(intp, demod);
-		}
-	}
-
-	if (lock == TRUE)
-		signal_type = stv0900_get_signal_params(fe);
-
-	if ((lock == TRUE) && (signal_type == STV0900_RANGEOK)) {
-		stv0900_track_optimization(fe);
-		if (intp->chip_id <= 0x11) {
-			if ((stv0900_get_standard(fe, 0) ==
-						STV0900_DVBS1_STANDARD) &&
-			   (stv0900_get_standard(fe, 1) ==
-						STV0900_DVBS1_STANDARD)) {
-				msleep(20);
-				stv0900_write_bits(intp, RST_HWARE, 0);
-			} else {
-				stv0900_write_bits(intp, RST_HWARE, 0);
-				msleep(3);
-				stv0900_write_bits(intp, RST_HWARE, 1);
-				stv0900_write_bits(intp, RST_HWARE, 0);
-			}
-
-		} else if (intp->chip_id >= 0x20) {
-			stv0900_write_bits(intp, RST_HWARE, 0);
-			msleep(3);
-			stv0900_write_bits(intp, RST_HWARE, 1);
-			stv0900_write_bits(intp, RST_HWARE, 0);
-		}
-
-		if (stv0900_wait_for_lock(intp, demod,
-					fec_timeout, fec_timeout) == TRUE) {
-			lock = TRUE;
-			intp->result[demod].locked = TRUE;
-			if (intp->result[demod].standard ==
-						STV0900_DVBS2_STANDARD) {
-				stv0900_set_dvbs2_rolloff(intp, demod);
-				stv0900_write_bits(intp, RESET_UPKO_COUNT, 1);
-				stv0900_write_bits(intp, RESET_UPKO_COUNT, 0);
-				stv0900_write_reg(intp, ERRCTRL1, 0x67);
-			} else {
-				stv0900_write_reg(intp, ERRCTRL1, 0x75);
-			}
-
-			stv0900_write_reg(intp, FBERCPT4, 0);
-			stv0900_write_reg(intp, ERRCTRL2, 0xc1);
-		} else {
-			lock = FALSE;
-			signal_type = STV0900_NODATA;
-			no_signal = stv0900_check_signal_presence(intp, demod);
-
-				intp->result[demod].locked = FALSE;
-		}
-	}
-
-	if ((signal_type != STV0900_NODATA) || (no_signal != FALSE))
-		return signal_type;
-
-	if (intp->chip_id > 0x11) {
-		intp->result[demod].locked = FALSE;
-		return signal_type;
-	}
-
-	if ((stv0900_get_bits(intp, HEADER_MODE) == STV0900_DVBS_FOUND) &&
-	   (intp->srch_iq_inv[demod] <= STV0900_IQ_AUTO_NORMAL_FIRST))
-		signal_type = stv0900_dvbs1_acq_workaround(fe);
-
-	return signal_type;
-}
-
diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c
deleted file mode 100644
index ea86a56..0000000
--- a/drivers/media/dvb/frontends/stv090x.c
+++ /dev/null
@@ -1,4823 +0,0 @@
-/*
-	STV0900/0903 Multistandard Broadcast Frontend driver
-	Copyright (C) Manu Abraham <abraham.manu@gmail.com>
-
-	Copyright (C) ST Microelectronics
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-
-#include <linux/dvb/frontend.h>
-#include "dvb_frontend.h"
-
-#include "stv6110x.h" /* for demodulator internal modes */
-
-#include "stv090x_reg.h"
-#include "stv090x.h"
-#include "stv090x_priv.h"
-
-static unsigned int verbose;
-module_param(verbose, int, 0644);
-
-/* internal params node */
-struct stv090x_dev {
-	/* pointer for internal params, one for each pair of demods */
-	struct stv090x_internal		*internal;
-	struct stv090x_dev		*next_dev;
-};
-
-/* first internal params */
-static struct stv090x_dev *stv090x_first_dev;
-
-/* find chip by i2c adapter and i2c address */
-static struct stv090x_dev *find_dev(struct i2c_adapter *i2c_adap,
-					u8 i2c_addr)
-{
-	struct stv090x_dev *temp_dev = stv090x_first_dev;
-
-	/*
-	 Search of the last stv0900 chip or
-	 find it by i2c adapter and i2c address */
-	while ((temp_dev != NULL) &&
-		((temp_dev->internal->i2c_adap != i2c_adap) ||
-		(temp_dev->internal->i2c_addr != i2c_addr))) {
-
-		temp_dev = temp_dev->next_dev;
-	}
-
-	return temp_dev;
-}
-
-/* deallocating chip */
-static void remove_dev(struct stv090x_internal *internal)
-{
-	struct stv090x_dev *prev_dev = stv090x_first_dev;
-	struct stv090x_dev *del_dev = find_dev(internal->i2c_adap,
-						internal->i2c_addr);
-
-	if (del_dev != NULL) {
-		if (del_dev == stv090x_first_dev) {
-			stv090x_first_dev = del_dev->next_dev;
-		} else {
-			while (prev_dev->next_dev != del_dev)
-				prev_dev = prev_dev->next_dev;
-
-			prev_dev->next_dev = del_dev->next_dev;
-		}
-
-		kfree(del_dev);
-	}
-}
-
-/* allocating new chip */
-static struct stv090x_dev *append_internal(struct stv090x_internal *internal)
-{
-	struct stv090x_dev *new_dev;
-	struct stv090x_dev *temp_dev;
-
-	new_dev = kmalloc(sizeof(struct stv090x_dev), GFP_KERNEL);
-	if (new_dev != NULL) {
-		new_dev->internal = internal;
-		new_dev->next_dev = NULL;
-
-		/* append to list */
-		if (stv090x_first_dev == NULL) {
-			stv090x_first_dev = new_dev;
-		} else {
-			temp_dev = stv090x_first_dev;
-			while (temp_dev->next_dev != NULL)
-				temp_dev = temp_dev->next_dev;
-
-			temp_dev->next_dev = new_dev;
-		}
-	}
-
-	return new_dev;
-}
-
-
-/* DVBS1 and DSS C/N Lookup table */
-static const struct stv090x_tab stv090x_s1cn_tab[] = {
-	{   0, 8917 }, /*  0.0dB */
-	{   5, 8801 }, /*  0.5dB */
-	{  10, 8667 }, /*  1.0dB */
-	{  15, 8522 }, /*  1.5dB */
-	{  20, 8355 }, /*  2.0dB */
-	{  25, 8175 }, /*  2.5dB */
-	{  30, 7979 }, /*  3.0dB */
-	{  35, 7763 }, /*  3.5dB */
-	{  40, 7530 }, /*  4.0dB */
-	{  45, 7282 }, /*  4.5dB */
-	{  50, 7026 }, /*  5.0dB */
-	{  55, 6781 }, /*  5.5dB */
-	{  60, 6514 }, /*  6.0dB */
-	{  65, 6241 }, /*  6.5dB */
-	{  70, 5965 }, /*  7.0dB */
-	{  75, 5690 }, /*  7.5dB */
-	{  80, 5424 }, /*  8.0dB */
-	{  85, 5161 }, /*  8.5dB */
-	{  90, 4902 }, /*  9.0dB */
-	{  95, 4654 }, /*  9.5dB */
-	{ 100, 4417 }, /* 10.0dB */
-	{ 105, 4186 }, /* 10.5dB */
-	{ 110, 3968 }, /* 11.0dB */
-	{ 115, 3757 }, /* 11.5dB */
-	{ 120, 3558 }, /* 12.0dB */
-	{ 125, 3366 }, /* 12.5dB */
-	{ 130, 3185 }, /* 13.0dB */
-	{ 135, 3012 }, /* 13.5dB */
-	{ 140, 2850 }, /* 14.0dB */
-	{ 145, 2698 }, /* 14.5dB */
-	{ 150, 2550 }, /* 15.0dB */
-	{ 160, 2283 }, /* 16.0dB */
-	{ 170, 2042 }, /* 17.0dB */
-	{ 180, 1827 }, /* 18.0dB */
-	{ 190, 1636 }, /* 19.0dB */
-	{ 200, 1466 }, /* 20.0dB */
-	{ 210, 1315 }, /* 21.0dB */
-	{ 220, 1181 }, /* 22.0dB */
-	{ 230, 1064 }, /* 23.0dB */
-	{ 240,	960 }, /* 24.0dB */
-	{ 250,	869 }, /* 25.0dB */
-	{ 260,	792 }, /* 26.0dB */
-	{ 270,	724 }, /* 27.0dB */
-	{ 280,	665 }, /* 28.0dB */
-	{ 290,	616 }, /* 29.0dB */
-	{ 300,	573 }, /* 30.0dB */
-	{ 310,	537 }, /* 31.0dB */
-	{ 320,	507 }, /* 32.0dB */
-	{ 330,	483 }, /* 33.0dB */
-	{ 400,	398 }, /* 40.0dB */
-	{ 450,	381 }, /* 45.0dB */
-	{ 500,	377 }  /* 50.0dB */
-};
-
-/* DVBS2 C/N Lookup table */
-static const struct stv090x_tab stv090x_s2cn_tab[] = {
-	{ -30, 13348 }, /* -3.0dB */
-	{ -20, 12640 }, /* -2d.0B */
-	{ -10, 11883 }, /* -1.0dB */
-	{   0, 11101 }, /* -0.0dB */
-	{   5, 10718 }, /*  0.5dB */
-	{  10, 10339 }, /*  1.0dB */
-	{  15,  9947 }, /*  1.5dB */
-	{  20,  9552 }, /*  2.0dB */
-	{  25,  9183 }, /*  2.5dB */
-	{  30,  8799 }, /*  3.0dB */
-	{  35,  8422 }, /*  3.5dB */
-	{  40,  8062 }, /*  4.0dB */
-	{  45,  7707 }, /*  4.5dB */
-	{  50,  7353 }, /*  5.0dB */
-	{  55,  7025 }, /*  5.5dB */
-	{  60,  6684 }, /*  6.0dB */
-	{  65,  6331 }, /*  6.5dB */
-	{  70,  6036 }, /*  7.0dB */
-	{  75,  5727 }, /*  7.5dB */
-	{  80,  5437 }, /*  8.0dB */
-	{  85,  5164 }, /*  8.5dB */
-	{  90,  4902 }, /*  9.0dB */
-	{  95,  4653 }, /*  9.5dB */
-	{ 100,  4408 }, /* 10.0dB */
-	{ 105,  4187 }, /* 10.5dB */
-	{ 110,  3961 }, /* 11.0dB */
-	{ 115,  3751 }, /* 11.5dB */
-	{ 120,  3558 }, /* 12.0dB */
-	{ 125,  3368 }, /* 12.5dB */
-	{ 130,  3191 }, /* 13.0dB */
-	{ 135,  3017 }, /* 13.5dB */
-	{ 140,  2862 }, /* 14.0dB */
-	{ 145,  2710 }, /* 14.5dB */
-	{ 150,  2565 }, /* 15.0dB */
-	{ 160,  2300 }, /* 16.0dB */
-	{ 170,  2058 }, /* 17.0dB */
-	{ 180,  1849 }, /* 18.0dB */
-	{ 190,  1663 }, /* 19.0dB */
-	{ 200,  1495 }, /* 20.0dB */
-	{ 210,  1349 }, /* 21.0dB */
-	{ 220,  1222 }, /* 22.0dB */
-	{ 230,  1110 }, /* 23.0dB */
-	{ 240,  1011 }, /* 24.0dB */
-	{ 250,   925 }, /* 25.0dB */
-	{ 260,   853 }, /* 26.0dB */
-	{ 270,   789 }, /* 27.0dB */
-	{ 280,   734 }, /* 28.0dB */
-	{ 290,   690 }, /* 29.0dB */
-	{ 300,   650 }, /* 30.0dB */
-	{ 310,   619 }, /* 31.0dB */
-	{ 320,   593 }, /* 32.0dB */
-	{ 330,   571 }, /* 33.0dB */
-	{ 400,   498 }, /* 40.0dB */
-	{ 450,	 484 }, /* 45.0dB */
-	{ 500,	 481 }	/* 50.0dB */
-};
-
-/* RF level C/N lookup table */
-static const struct stv090x_tab stv090x_rf_tab[] = {
-	{  -5, 0xcaa1 }, /*  -5dBm */
-	{ -10, 0xc229 }, /* -10dBm */
-	{ -15, 0xbb08 }, /* -15dBm */
-	{ -20, 0xb4bc }, /* -20dBm */
-	{ -25, 0xad5a }, /* -25dBm */
-	{ -30, 0xa298 }, /* -30dBm */
-	{ -35, 0x98a8 }, /* -35dBm */
-	{ -40, 0x8389 }, /* -40dBm */
-	{ -45, 0x59be }, /* -45dBm */
-	{ -50, 0x3a14 }, /* -50dBm */
-	{ -55, 0x2d11 }, /* -55dBm */
-	{ -60, 0x210d }, /* -60dBm */
-	{ -65, 0xa14f }, /* -65dBm */
-	{ -70, 0x07aa }	 /* -70dBm */
-};
-
-
-static struct stv090x_reg stv0900_initval[] = {
-
-	{ STV090x_OUTCFG,		0x00 },
-	{ STV090x_MODECFG,		0xff },
-	{ STV090x_AGCRF1CFG,		0x11 },
-	{ STV090x_AGCRF2CFG,		0x13 },
-	{ STV090x_TSGENERAL1X,		0x14 },
-	{ STV090x_TSTTNR2,		0x21 },
-	{ STV090x_TSTTNR4,		0x21 },
-	{ STV090x_P2_DISTXCTL,		0x22 },
-	{ STV090x_P2_F22TX,		0xc0 },
-	{ STV090x_P2_F22RX,		0xc0 },
-	{ STV090x_P2_DISRXCTL,		0x00 },
-	{ STV090x_P2_DMDCFGMD,		0xF9 },
-	{ STV090x_P2_DEMOD,		0x08 },
-	{ STV090x_P2_DMDCFG3,		0xc4 },
-	{ STV090x_P2_CARFREQ,		0xed },
-	{ STV090x_P2_LDT,		0xd0 },
-	{ STV090x_P2_LDT2,		0xb8 },
-	{ STV090x_P2_TMGCFG,		0xd2 },
-	{ STV090x_P2_TMGTHRISE,		0x20 },
-	{ STV090x_P1_TMGCFG,		0xd2 },
-
-	{ STV090x_P2_TMGTHFALL,		0x00 },
-	{ STV090x_P2_FECSPY,		0x88 },
-	{ STV090x_P2_FSPYDATA,		0x3a },
-	{ STV090x_P2_FBERCPT4,		0x00 },
-	{ STV090x_P2_FSPYBER,		0x10 },
-	{ STV090x_P2_ERRCTRL1,		0x35 },
-	{ STV090x_P2_ERRCTRL2,		0xc1 },
-	{ STV090x_P2_CFRICFG,		0xf8 },
-	{ STV090x_P2_NOSCFG,		0x1c },
-	{ STV090x_P2_DMDTOM,		0x20 },
-	{ STV090x_P2_CORRELMANT,	0x70 },
-	{ STV090x_P2_CORRELABS,		0x88 },
-	{ STV090x_P2_AGC2O,		0x5b },
-	{ STV090x_P2_AGC2REF,		0x38 },
-	{ STV090x_P2_CARCFG,		0xe4 },
-	{ STV090x_P2_ACLC,		0x1A },
-	{ STV090x_P2_BCLC,		0x09 },
-	{ STV090x_P2_CARHDR,		0x08 },
-	{ STV090x_P2_KREFTMG,		0xc1 },
-	{ STV090x_P2_SFRUPRATIO,	0xf0 },
-	{ STV090x_P2_SFRLOWRATIO,	0x70 },
-	{ STV090x_P2_SFRSTEP,		0x58 },
-	{ STV090x_P2_TMGCFG2,		0x01 },
-	{ STV090x_P2_CAR2CFG,		0x26 },
-	{ STV090x_P2_BCLC2S2Q,		0x86 },
-	{ STV090x_P2_BCLC2S28,		0x86 },
-	{ STV090x_P2_SMAPCOEF7,		0x77 },
-	{ STV090x_P2_SMAPCOEF6,		0x85 },
-	{ STV090x_P2_SMAPCOEF5,		0x77 },
-	{ STV090x_P2_TSCFGL,		0x20 },
-	{ STV090x_P2_DMDCFG2,		0x3b },
-	{ STV090x_P2_MODCODLST0,	0xff },
-	{ STV090x_P2_MODCODLST1,	0xff },
-	{ STV090x_P2_MODCODLST2,	0xff },
-	{ STV090x_P2_MODCODLST3,	0xff },
-	{ STV090x_P2_MODCODLST4,	0xff },
-	{ STV090x_P2_MODCODLST5,	0xff },
-	{ STV090x_P2_MODCODLST6,	0xff },
-	{ STV090x_P2_MODCODLST7,	0xcc },
-	{ STV090x_P2_MODCODLST8,	0xcc },
-	{ STV090x_P2_MODCODLST9,	0xcc },
-	{ STV090x_P2_MODCODLSTA,	0xcc },
-	{ STV090x_P2_MODCODLSTB,	0xcc },
-	{ STV090x_P2_MODCODLSTC,	0xcc },
-	{ STV090x_P2_MODCODLSTD,	0xcc },
-	{ STV090x_P2_MODCODLSTE,	0xcc },
-	{ STV090x_P2_MODCODLSTF,	0xcf },
-	{ STV090x_P1_DISTXCTL,		0x22 },
-	{ STV090x_P1_F22TX,		0xc0 },
-	{ STV090x_P1_F22RX,		0xc0 },
-	{ STV090x_P1_DISRXCTL,		0x00 },
-	{ STV090x_P1_DMDCFGMD,		0xf9 },
-	{ STV090x_P1_DEMOD,		0x08 },
-	{ STV090x_P1_DMDCFG3,		0xc4 },
-	{ STV090x_P1_DMDTOM,		0x20 },
-	{ STV090x_P1_CARFREQ,		0xed },
-	{ STV090x_P1_LDT,		0xd0 },
-	{ STV090x_P1_LDT2,		0xb8 },
-	{ STV090x_P1_TMGCFG,		0xd2 },
-	{ STV090x_P1_TMGTHRISE,		0x20 },
-	{ STV090x_P1_TMGTHFALL,		0x00 },
-	{ STV090x_P1_SFRUPRATIO,	0xf0 },
-	{ STV090x_P1_SFRLOWRATIO,	0x70 },
-	{ STV090x_P1_TSCFGL,		0x20 },
-	{ STV090x_P1_FECSPY,		0x88 },
-	{ STV090x_P1_FSPYDATA,		0x3a },
-	{ STV090x_P1_FBERCPT4,		0x00 },
-	{ STV090x_P1_FSPYBER,		0x10 },
-	{ STV090x_P1_ERRCTRL1,		0x35 },
-	{ STV090x_P1_ERRCTRL2,		0xc1 },
-	{ STV090x_P1_CFRICFG,		0xf8 },
-	{ STV090x_P1_NOSCFG,		0x1c },
-	{ STV090x_P1_CORRELMANT,	0x70 },
-	{ STV090x_P1_CORRELABS,		0x88 },
-	{ STV090x_P1_AGC2O,		0x5b },
-	{ STV090x_P1_AGC2REF,		0x38 },
-	{ STV090x_P1_CARCFG,		0xe4 },
-	{ STV090x_P1_ACLC,		0x1A },
-	{ STV090x_P1_BCLC,		0x09 },
-	{ STV090x_P1_CARHDR,		0x08 },
-	{ STV090x_P1_KREFTMG,		0xc1 },
-	{ STV090x_P1_SFRSTEP,		0x58 },
-	{ STV090x_P1_TMGCFG2,		0x01 },
-	{ STV090x_P1_CAR2CFG,		0x26 },
-	{ STV090x_P1_BCLC2S2Q,		0x86 },
-	{ STV090x_P1_BCLC2S28,		0x86 },
-	{ STV090x_P1_SMAPCOEF7,		0x77 },
-	{ STV090x_P1_SMAPCOEF6,		0x85 },
-	{ STV090x_P1_SMAPCOEF5,		0x77 },
-	{ STV090x_P1_DMDCFG2,		0x3b },
-	{ STV090x_P1_MODCODLST0,	0xff },
-	{ STV090x_P1_MODCODLST1,	0xff },
-	{ STV090x_P1_MODCODLST2,	0xff },
-	{ STV090x_P1_MODCODLST3,	0xff },
-	{ STV090x_P1_MODCODLST4,	0xff },
-	{ STV090x_P1_MODCODLST5,	0xff },
-	{ STV090x_P1_MODCODLST6,	0xff },
-	{ STV090x_P1_MODCODLST7,	0xcc },
-	{ STV090x_P1_MODCODLST8,	0xcc },
-	{ STV090x_P1_MODCODLST9,	0xcc },
-	{ STV090x_P1_MODCODLSTA,	0xcc },
-	{ STV090x_P1_MODCODLSTB,	0xcc },
-	{ STV090x_P1_MODCODLSTC,	0xcc },
-	{ STV090x_P1_MODCODLSTD,	0xcc },
-	{ STV090x_P1_MODCODLSTE,	0xcc },
-	{ STV090x_P1_MODCODLSTF,	0xcf },
-	{ STV090x_GENCFG,		0x1d },
-	{ STV090x_NBITER_NF4,		0x37 },
-	{ STV090x_NBITER_NF5,		0x29 },
-	{ STV090x_NBITER_NF6,		0x37 },
-	{ STV090x_NBITER_NF7,		0x33 },
-	{ STV090x_NBITER_NF8,		0x31 },
-	{ STV090x_NBITER_NF9,		0x2f },
-	{ STV090x_NBITER_NF10,		0x39 },
-	{ STV090x_NBITER_NF11,		0x3a },
-	{ STV090x_NBITER_NF12,		0x29 },
-	{ STV090x_NBITER_NF13,		0x37 },
-	{ STV090x_NBITER_NF14,		0x33 },
-	{ STV090x_NBITER_NF15,		0x2f },
-	{ STV090x_NBITER_NF16,		0x39 },
-	{ STV090x_NBITER_NF17,		0x3a },
-	{ STV090x_NBITERNOERR,		0x04 },
-	{ STV090x_GAINLLR_NF4,		0x0C },
-	{ STV090x_GAINLLR_NF5,		0x0F },
-	{ STV090x_GAINLLR_NF6,		0x11 },
-	{ STV090x_GAINLLR_NF7,		0x14 },
-	{ STV090x_GAINLLR_NF8,		0x17 },
-	{ STV090x_GAINLLR_NF9,		0x19 },
-	{ STV090x_GAINLLR_NF10,		0x20 },
-	{ STV090x_GAINLLR_NF11,		0x21 },
-	{ STV090x_GAINLLR_NF12,		0x0D },
-	{ STV090x_GAINLLR_NF13,		0x0F },
-	{ STV090x_GAINLLR_NF14,		0x13 },
-	{ STV090x_GAINLLR_NF15,		0x1A },
-	{ STV090x_GAINLLR_NF16,		0x1F },
-	{ STV090x_GAINLLR_NF17,		0x21 },
-	{ STV090x_RCCFGH,		0x20 },
-	{ STV090x_P1_FECM,		0x01 }, /* disable DSS modes */
-	{ STV090x_P2_FECM,		0x01 }, /* disable DSS modes */
-	{ STV090x_P1_PRVIT,		0x2F }, /* disable PR 6/7 */
-	{ STV090x_P2_PRVIT,		0x2F }, /* disable PR 6/7 */
-};
-
-static struct stv090x_reg stv0903_initval[] = {
-	{ STV090x_OUTCFG,		0x00 },
-	{ STV090x_AGCRF1CFG,		0x11 },
-	{ STV090x_STOPCLK1,		0x48 },
-	{ STV090x_STOPCLK2,		0x14 },
-	{ STV090x_TSTTNR1,		0x27 },
-	{ STV090x_TSTTNR2,		0x21 },
-	{ STV090x_P1_DISTXCTL,		0x22 },
-	{ STV090x_P1_F22TX,		0xc0 },
-	{ STV090x_P1_F22RX,		0xc0 },
-	{ STV090x_P1_DISRXCTL,		0x00 },
-	{ STV090x_P1_DMDCFGMD,		0xF9 },
-	{ STV090x_P1_DEMOD,		0x08 },
-	{ STV090x_P1_DMDCFG3,		0xc4 },
-	{ STV090x_P1_CARFREQ,		0xed },
-	{ STV090x_P1_TNRCFG2,		0x82 },
-	{ STV090x_P1_LDT,		0xd0 },
-	{ STV090x_P1_LDT2,		0xb8 },
-	{ STV090x_P1_TMGCFG,		0xd2 },
-	{ STV090x_P1_TMGTHRISE,		0x20 },
-	{ STV090x_P1_TMGTHFALL,		0x00 },
-	{ STV090x_P1_SFRUPRATIO,	0xf0 },
-	{ STV090x_P1_SFRLOWRATIO,	0x70 },
-	{ STV090x_P1_TSCFGL,		0x20 },
-	{ STV090x_P1_FECSPY,		0x88 },
-	{ STV090x_P1_FSPYDATA,		0x3a },
-	{ STV090x_P1_FBERCPT4,		0x00 },
-	{ STV090x_P1_FSPYBER,		0x10 },
-	{ STV090x_P1_ERRCTRL1,		0x35 },
-	{ STV090x_P1_ERRCTRL2,		0xc1 },
-	{ STV090x_P1_CFRICFG,		0xf8 },
-	{ STV090x_P1_NOSCFG,		0x1c },
-	{ STV090x_P1_DMDTOM,		0x20 },
-	{ STV090x_P1_CORRELMANT,	0x70 },
-	{ STV090x_P1_CORRELABS,		0x88 },
-	{ STV090x_P1_AGC2O,		0x5b },
-	{ STV090x_P1_AGC2REF,		0x38 },
-	{ STV090x_P1_CARCFG,		0xe4 },
-	{ STV090x_P1_ACLC,		0x1A },
-	{ STV090x_P1_BCLC,		0x09 },
-	{ STV090x_P1_CARHDR,		0x08 },
-	{ STV090x_P1_KREFTMG,		0xc1 },
-	{ STV090x_P1_SFRSTEP,		0x58 },
-	{ STV090x_P1_TMGCFG2,		0x01 },
-	{ STV090x_P1_CAR2CFG,		0x26 },
-	{ STV090x_P1_BCLC2S2Q,		0x86 },
-	{ STV090x_P1_BCLC2S28,		0x86 },
-	{ STV090x_P1_SMAPCOEF7,		0x77 },
-	{ STV090x_P1_SMAPCOEF6,		0x85 },
-	{ STV090x_P1_SMAPCOEF5,		0x77 },
-	{ STV090x_P1_DMDCFG2,		0x3b },
-	{ STV090x_P1_MODCODLST0,	0xff },
-	{ STV090x_P1_MODCODLST1,	0xff },
-	{ STV090x_P1_MODCODLST2,	0xff },
-	{ STV090x_P1_MODCODLST3,	0xff },
-	{ STV090x_P1_MODCODLST4,	0xff },
-	{ STV090x_P1_MODCODLST5,	0xff },
-	{ STV090x_P1_MODCODLST6,	0xff },
-	{ STV090x_P1_MODCODLST7,	0xcc },
-	{ STV090x_P1_MODCODLST8,	0xcc },
-	{ STV090x_P1_MODCODLST9,	0xcc },
-	{ STV090x_P1_MODCODLSTA,	0xcc },
-	{ STV090x_P1_MODCODLSTB,	0xcc },
-	{ STV090x_P1_MODCODLSTC,	0xcc },
-	{ STV090x_P1_MODCODLSTD,	0xcc },
-	{ STV090x_P1_MODCODLSTE,	0xcc },
-	{ STV090x_P1_MODCODLSTF,	0xcf },
-	{ STV090x_GENCFG,		0x1c },
-	{ STV090x_NBITER_NF4,		0x37 },
-	{ STV090x_NBITER_NF5,		0x29 },
-	{ STV090x_NBITER_NF6,		0x37 },
-	{ STV090x_NBITER_NF7,		0x33 },
-	{ STV090x_NBITER_NF8,		0x31 },
-	{ STV090x_NBITER_NF9,		0x2f },
-	{ STV090x_NBITER_NF10,		0x39 },
-	{ STV090x_NBITER_NF11,		0x3a },
-	{ STV090x_NBITER_NF12,		0x29 },
-	{ STV090x_NBITER_NF13,		0x37 },
-	{ STV090x_NBITER_NF14,		0x33 },
-	{ STV090x_NBITER_NF15,		0x2f },
-	{ STV090x_NBITER_NF16,		0x39 },
-	{ STV090x_NBITER_NF17,		0x3a },
-	{ STV090x_NBITERNOERR,		0x04 },
-	{ STV090x_GAINLLR_NF4,		0x0C },
-	{ STV090x_GAINLLR_NF5,		0x0F },
-	{ STV090x_GAINLLR_NF6,		0x11 },
-	{ STV090x_GAINLLR_NF7,		0x14 },
-	{ STV090x_GAINLLR_NF8,		0x17 },
-	{ STV090x_GAINLLR_NF9,		0x19 },
-	{ STV090x_GAINLLR_NF10,		0x20 },
-	{ STV090x_GAINLLR_NF11,		0x21 },
-	{ STV090x_GAINLLR_NF12,		0x0D },
-	{ STV090x_GAINLLR_NF13,		0x0F },
-	{ STV090x_GAINLLR_NF14,		0x13 },
-	{ STV090x_GAINLLR_NF15,		0x1A },
-	{ STV090x_GAINLLR_NF16,		0x1F },
-	{ STV090x_GAINLLR_NF17,		0x21 },
-	{ STV090x_RCCFGH,		0x20 },
-	{ STV090x_P1_FECM,		0x01 }, /*disable the DSS mode */
-	{ STV090x_P1_PRVIT,		0x2f }  /*disable puncture rate 6/7*/
-};
-
-static struct stv090x_reg stv0900_cut20_val[] = {
-
-	{ STV090x_P2_DMDCFG3,		0xe8 },
-	{ STV090x_P2_DMDCFG4,		0x10 },
-	{ STV090x_P2_CARFREQ,		0x38 },
-	{ STV090x_P2_CARHDR,		0x20 },
-	{ STV090x_P2_KREFTMG,		0x5a },
-	{ STV090x_P2_SMAPCOEF7,		0x06 },
-	{ STV090x_P2_SMAPCOEF6,		0x00 },
-	{ STV090x_P2_SMAPCOEF5,		0x04 },
-	{ STV090x_P2_NOSCFG,		0x0c },
-	{ STV090x_P1_DMDCFG3,		0xe8 },
-	{ STV090x_P1_DMDCFG4,		0x10 },
-	{ STV090x_P1_CARFREQ,		0x38 },
-	{ STV090x_P1_CARHDR,		0x20 },
-	{ STV090x_P1_KREFTMG,		0x5a },
-	{ STV090x_P1_SMAPCOEF7,		0x06 },
-	{ STV090x_P1_SMAPCOEF6,		0x00 },
-	{ STV090x_P1_SMAPCOEF5,		0x04 },
-	{ STV090x_P1_NOSCFG,		0x0c },
-	{ STV090x_GAINLLR_NF4,		0x21 },
-	{ STV090x_GAINLLR_NF5,		0x21 },
-	{ STV090x_GAINLLR_NF6,		0x20 },
-	{ STV090x_GAINLLR_NF7,		0x1F },
-	{ STV090x_GAINLLR_NF8,		0x1E },
-	{ STV090x_GAINLLR_NF9,		0x1E },
-	{ STV090x_GAINLLR_NF10,		0x1D },
-	{ STV090x_GAINLLR_NF11,		0x1B },
-	{ STV090x_GAINLLR_NF12,		0x20 },
-	{ STV090x_GAINLLR_NF13,		0x20 },
-	{ STV090x_GAINLLR_NF14,		0x20 },
-	{ STV090x_GAINLLR_NF15,		0x20 },
-	{ STV090x_GAINLLR_NF16,		0x20 },
-	{ STV090x_GAINLLR_NF17,		0x21 },
-};
-
-static struct stv090x_reg stv0903_cut20_val[] = {
-	{ STV090x_P1_DMDCFG3,		0xe8 },
-	{ STV090x_P1_DMDCFG4,		0x10 },
-	{ STV090x_P1_CARFREQ,		0x38 },
-	{ STV090x_P1_CARHDR,		0x20 },
-	{ STV090x_P1_KREFTMG,		0x5a },
-	{ STV090x_P1_SMAPCOEF7,		0x06 },
-	{ STV090x_P1_SMAPCOEF6,		0x00 },
-	{ STV090x_P1_SMAPCOEF5,		0x04 },
-	{ STV090x_P1_NOSCFG,		0x0c },
-	{ STV090x_GAINLLR_NF4,		0x21 },
-	{ STV090x_GAINLLR_NF5,		0x21 },
-	{ STV090x_GAINLLR_NF6,		0x20 },
-	{ STV090x_GAINLLR_NF7,		0x1F },
-	{ STV090x_GAINLLR_NF8,		0x1E },
-	{ STV090x_GAINLLR_NF9,		0x1E },
-	{ STV090x_GAINLLR_NF10,		0x1D },
-	{ STV090x_GAINLLR_NF11,		0x1B },
-	{ STV090x_GAINLLR_NF12,		0x20 },
-	{ STV090x_GAINLLR_NF13,		0x20 },
-	{ STV090x_GAINLLR_NF14,		0x20 },
-	{ STV090x_GAINLLR_NF15,		0x20 },
-	{ STV090x_GAINLLR_NF16,		0x20 },
-	{ STV090x_GAINLLR_NF17,		0x21 }
-};
-
-/* Cut 2.0 Long Frame Tracking CR loop */
-static struct stv090x_long_frame_crloop stv090x_s2_crl_cut20[] = {
-	/* MODCOD  2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
-	{ STV090x_QPSK_12,  0x1f, 0x3f, 0x1e, 0x3f, 0x3d, 0x1f, 0x3d, 0x3e, 0x3d, 0x1e },
-	{ STV090x_QPSK_35,  0x2f, 0x3f, 0x2e, 0x2f, 0x3d, 0x0f, 0x0e, 0x2e, 0x3d, 0x0e },
-	{ STV090x_QPSK_23,  0x2f, 0x3f, 0x2e, 0x2f, 0x0e, 0x0f, 0x0e, 0x1e, 0x3d, 0x3d },
-	{ STV090x_QPSK_34,  0x3f, 0x3f, 0x3e, 0x1f, 0x0e, 0x3e, 0x0e, 0x1e, 0x3d, 0x3d },
-	{ STV090x_QPSK_45,  0x3f, 0x3f, 0x3e, 0x1f, 0x0e, 0x3e, 0x0e, 0x1e, 0x3d, 0x3d },
-	{ STV090x_QPSK_56,  0x3f, 0x3f, 0x3e, 0x1f, 0x0e, 0x3e, 0x0e, 0x1e, 0x3d, 0x3d },
-	{ STV090x_QPSK_89,  0x3f, 0x3f, 0x3e, 0x1f, 0x1e, 0x3e, 0x0e, 0x1e, 0x3d, 0x3d },
-	{ STV090x_QPSK_910, 0x3f, 0x3f, 0x3e, 0x1f, 0x1e, 0x3e, 0x0e, 0x1e, 0x3d, 0x3d },
-	{ STV090x_8PSK_35,  0x3c, 0x3e, 0x1c, 0x2e, 0x0c, 0x1e, 0x2b, 0x2d, 0x1b, 0x1d },
-	{ STV090x_8PSK_23,  0x1d, 0x3e, 0x3c, 0x2e, 0x2c, 0x1e, 0x0c, 0x2d, 0x2b, 0x1d },
-	{ STV090x_8PSK_34,  0x0e, 0x3e, 0x3d, 0x2e, 0x0d, 0x1e, 0x2c, 0x2d, 0x0c, 0x1d },
-	{ STV090x_8PSK_56,  0x2e, 0x3e, 0x1e, 0x2e, 0x2d, 0x1e, 0x3c, 0x2d, 0x2c, 0x1d },
-	{ STV090x_8PSK_89,  0x3e, 0x3e, 0x1e, 0x2e, 0x3d, 0x1e, 0x0d, 0x2d, 0x3c, 0x1d },
-	{ STV090x_8PSK_910, 0x3e, 0x3e, 0x1e, 0x2e, 0x3d, 0x1e, 0x1d, 0x2d, 0x0d, 0x1d }
-};
-
-/* Cut 3.0 Long Frame Tracking CR loop */
-static	struct stv090x_long_frame_crloop stv090x_s2_crl_cut30[] = {
-	/* MODCOD  2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
-	{ STV090x_QPSK_12,  0x3c, 0x2c, 0x0c, 0x2c, 0x1b, 0x2c, 0x1b, 0x1c, 0x0b, 0x3b },
-	{ STV090x_QPSK_35,  0x0d, 0x0d, 0x0c, 0x0d, 0x1b, 0x3c, 0x1b, 0x1c, 0x0b, 0x3b },
-	{ STV090x_QPSK_23,  0x1d, 0x0d, 0x0c, 0x1d, 0x2b, 0x3c, 0x1b, 0x1c, 0x0b, 0x3b },
-	{ STV090x_QPSK_34,  0x1d, 0x1d, 0x0c, 0x1d, 0x2b, 0x3c, 0x1b, 0x1c, 0x0b, 0x3b },
-	{ STV090x_QPSK_45,  0x2d, 0x1d, 0x1c, 0x1d, 0x2b, 0x3c, 0x2b, 0x0c, 0x1b, 0x3b },
-	{ STV090x_QPSK_56,  0x2d, 0x1d, 0x1c, 0x1d, 0x2b, 0x3c, 0x2b, 0x0c, 0x1b, 0x3b },
-	{ STV090x_QPSK_89,  0x3d, 0x2d, 0x1c, 0x1d, 0x3b, 0x3c, 0x2b, 0x0c, 0x1b, 0x3b },
-	{ STV090x_QPSK_910, 0x3d, 0x2d, 0x1c, 0x1d, 0x3b, 0x3c, 0x2b, 0x0c, 0x1b, 0x3b },
-	{ STV090x_8PSK_35,  0x39, 0x29, 0x39, 0x19, 0x19, 0x19, 0x19, 0x19, 0x09, 0x19 },
-	{ STV090x_8PSK_23,  0x2a, 0x39, 0x1a, 0x0a, 0x39, 0x0a, 0x29, 0x39, 0x29, 0x0a },
-	{ STV090x_8PSK_34,  0x2b, 0x3a, 0x1b, 0x1b, 0x3a, 0x1b, 0x1a, 0x0b, 0x1a, 0x3a },
-	{ STV090x_8PSK_56,  0x0c, 0x1b, 0x3b, 0x3b, 0x1b, 0x3b, 0x3a, 0x3b, 0x3a, 0x1b },
-	{ STV090x_8PSK_89,  0x0d, 0x3c, 0x2c, 0x2c, 0x2b, 0x0c, 0x0b, 0x3b, 0x0b, 0x1b },
-	{ STV090x_8PSK_910, 0x0d, 0x0d, 0x2c, 0x3c, 0x3b, 0x1c, 0x0b, 0x3b, 0x0b, 0x1b }
-};
-
-/* Cut 2.0 Long Frame Tracking CR Loop */
-static struct stv090x_long_frame_crloop stv090x_s2_apsk_crl_cut20[] = {
-	/* MODCOD  2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
-	{ STV090x_16APSK_23,  0x0c, 0x0c, 0x0c, 0x0c, 0x1d, 0x0c, 0x3c, 0x0c, 0x2c, 0x0c },
-	{ STV090x_16APSK_34,  0x0c, 0x0c, 0x0c, 0x0c, 0x0e, 0x0c, 0x2d, 0x0c, 0x1d, 0x0c },
-	{ STV090x_16APSK_45,  0x0c, 0x0c, 0x0c, 0x0c, 0x1e, 0x0c, 0x3d, 0x0c, 0x2d, 0x0c },
-	{ STV090x_16APSK_56,  0x0c, 0x0c, 0x0c, 0x0c, 0x1e, 0x0c, 0x3d, 0x0c, 0x2d, 0x0c },
-	{ STV090x_16APSK_89,  0x0c, 0x0c, 0x0c, 0x0c, 0x2e, 0x0c, 0x0e, 0x0c, 0x3d, 0x0c },
-	{ STV090x_16APSK_910, 0x0c, 0x0c, 0x0c, 0x0c, 0x2e, 0x0c, 0x0e, 0x0c, 0x3d, 0x0c },
-	{ STV090x_32APSK_34,  0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c },
-	{ STV090x_32APSK_45,  0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c },
-	{ STV090x_32APSK_56,  0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c },
-	{ STV090x_32APSK_89,  0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c },
-	{ STV090x_32APSK_910, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c }
-};
-
-/* Cut 3.0 Long Frame Tracking CR Loop */
-static struct stv090x_long_frame_crloop	stv090x_s2_apsk_crl_cut30[] = {
-	/* MODCOD  2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
-	{ STV090x_16APSK_23,  0x0a, 0x0a, 0x0a, 0x0a, 0x1a, 0x0a, 0x3a, 0x0a, 0x2a, 0x0a },
-	{ STV090x_16APSK_34,  0x0a, 0x0a, 0x0a, 0x0a, 0x0b, 0x0a, 0x3b, 0x0a, 0x1b, 0x0a },
-	{ STV090x_16APSK_45,  0x0a, 0x0a, 0x0a, 0x0a, 0x1b, 0x0a, 0x3b, 0x0a, 0x2b, 0x0a },
-	{ STV090x_16APSK_56,  0x0a, 0x0a, 0x0a, 0x0a, 0x1b, 0x0a, 0x3b, 0x0a, 0x2b, 0x0a },
-	{ STV090x_16APSK_89,  0x0a, 0x0a, 0x0a, 0x0a, 0x2b, 0x0a, 0x0c, 0x0a, 0x3b, 0x0a },
-	{ STV090x_16APSK_910, 0x0a, 0x0a, 0x0a, 0x0a, 0x2b, 0x0a, 0x0c, 0x0a, 0x3b, 0x0a },
-	{ STV090x_32APSK_34,  0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a },
-	{ STV090x_32APSK_45,  0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a },
-	{ STV090x_32APSK_56,  0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a },
-	{ STV090x_32APSK_89,  0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a },
-	{ STV090x_32APSK_910, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a }
-};
-
-static struct stv090x_long_frame_crloop stv090x_s2_lowqpsk_crl_cut20[] = {
-	/* MODCOD  2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
-	{ STV090x_QPSK_14,  0x0f, 0x3f, 0x0e, 0x3f, 0x2d, 0x2f, 0x2d, 0x1f, 0x3d, 0x3e },
-	{ STV090x_QPSK_13,  0x0f, 0x3f, 0x0e, 0x3f, 0x2d, 0x2f, 0x3d, 0x0f, 0x3d, 0x2e },
-	{ STV090x_QPSK_25,  0x1f, 0x3f, 0x1e, 0x3f, 0x3d, 0x1f, 0x3d, 0x3e, 0x3d, 0x2e }
-};
-
-static struct stv090x_long_frame_crloop	stv090x_s2_lowqpsk_crl_cut30[] = {
-	/* MODCOD  2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
-	{ STV090x_QPSK_14,  0x0c, 0x3c, 0x0b, 0x3c, 0x2a, 0x2c, 0x2a, 0x1c, 0x3a, 0x3b },
-	{ STV090x_QPSK_13,  0x0c, 0x3c, 0x0b, 0x3c, 0x2a, 0x2c, 0x3a, 0x0c, 0x3a, 0x2b },
-	{ STV090x_QPSK_25,  0x1c, 0x3c, 0x1b, 0x3c, 0x3a, 0x1c, 0x3a, 0x3b, 0x3a, 0x2b }
-};
-
-/* Cut 2.0 Short Frame Tracking CR Loop */
-static struct stv090x_short_frame_crloop stv090x_s2_short_crl_cut20[] = {
-	/* MODCOD	  2M    5M    10M   20M   30M */
-	{ STV090x_QPSK,   0x2f, 0x2e, 0x0e, 0x0e, 0x3d },
-	{ STV090x_8PSK,   0x3e, 0x0e, 0x2d, 0x0d, 0x3c },
-	{ STV090x_16APSK, 0x1e, 0x1e, 0x1e, 0x3d, 0x2d },
-	{ STV090x_32APSK, 0x1e, 0x1e, 0x1e, 0x3d, 0x2d }
-};
-
-/* Cut 3.0 Short Frame Tracking CR Loop */
-static struct stv090x_short_frame_crloop stv090x_s2_short_crl_cut30[] = {
-	/* MODCOD  	  2M	5M    10M   20M	  30M */
-	{ STV090x_QPSK,   0x2C, 0x2B, 0x0B, 0x0B, 0x3A },
-	{ STV090x_8PSK,   0x3B, 0x0B, 0x2A, 0x0A, 0x39 },
-	{ STV090x_16APSK, 0x1B, 0x1B, 0x1B, 0x3A, 0x2A },
-	{ STV090x_32APSK, 0x1B, 0x1B, 0x1B, 0x3A, 0x2A }
-};
-
-static inline s32 comp2(s32 __x, s32 __width)
-{
-	if (__width == 32)
-		return __x;
-	else
-		return (__x >= (1 << (__width - 1))) ? (__x - (1 << __width)) : __x;
-}
-
-static int stv090x_read_reg(struct stv090x_state *state, unsigned int reg)
-{
-	const struct stv090x_config *config = state->config;
-	int ret;
-
-	u8 b0[] = { reg >> 8, reg & 0xff };
-	u8 buf;
-
-	struct i2c_msg msg[] = {
-		{ .addr	= config->address, .flags	= 0, 		.buf = b0,   .len = 2 },
-		{ .addr	= config->address, .flags	= I2C_M_RD,	.buf = &buf, .len = 1 }
-	};
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-	if (ret != 2) {
-		if (ret != -ERESTARTSYS)
-			dprintk(FE_ERROR, 1,
-				"Read error, Reg=[0x%02x], Status=%d",
-				reg, ret);
-
-		return ret < 0 ? ret : -EREMOTEIO;
-	}
-	if (unlikely(*state->verbose >= FE_DEBUGREG))
-		dprintk(FE_ERROR, 1, "Reg=[0x%02x], data=%02x",
-			reg, buf);
-
-	return (unsigned int) buf;
-}
-
-static int stv090x_write_regs(struct stv090x_state *state, unsigned int reg, u8 *data, u32 count)
-{
-	const struct stv090x_config *config = state->config;
-	int ret;
-	u8 buf[2 + count];
-	struct i2c_msg i2c_msg = { .addr = config->address, .flags = 0, .buf = buf, .len = 2 + count };
-
-	buf[0] = reg >> 8;
-	buf[1] = reg & 0xff;
-	memcpy(&buf[2], data, count);
-
-	if (unlikely(*state->verbose >= FE_DEBUGREG)) {
-		int i;
-
-		printk(KERN_DEBUG "%s [0x%04x]:", __func__, reg);
-		for (i = 0; i < count; i++)
-			printk(" %02x", data[i]);
-		printk("\n");
-	}
-
-	ret = i2c_transfer(state->i2c, &i2c_msg, 1);
-	if (ret != 1) {
-		if (ret != -ERESTARTSYS)
-			dprintk(FE_ERROR, 1, "Reg=[0x%04x], Data=[0x%02x ...], Count=%u, Status=%d",
-				reg, data[0], count, ret);
-		return ret < 0 ? ret : -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int stv090x_write_reg(struct stv090x_state *state, unsigned int reg, u8 data)
-{
-	return stv090x_write_regs(state, reg, &data, 1);
-}
-
-static int stv090x_i2c_gate_ctrl(struct stv090x_state *state, int enable)
-{
-	u32 reg;
-
-	/*
-	 * NOTE! A lock is used as a FSM to control the state in which
-	 * access is serialized between two tuners on the same demod.
-	 * This has nothing to do with a lock to protect a critical section
-	 * which may in some other cases be confused with protecting I/O
-	 * access to the demodulator gate.
-	 * In case of any error, the lock is unlocked and exit within the
-	 * relevant operations themselves.
-	 */
-	if (enable) {
-		if (state->config->tuner_i2c_lock)
-			state->config->tuner_i2c_lock(&state->frontend, 1);
-		else
-			mutex_lock(&state->internal->tuner_lock);
-	}
-
-	reg = STV090x_READ_DEMOD(state, I2CRPT);
-	if (enable) {
-		dprintk(FE_DEBUG, 1, "Enable Gate");
-		STV090x_SETFIELD_Px(reg, I2CT_ON_FIELD, 1);
-		if (STV090x_WRITE_DEMOD(state, I2CRPT, reg) < 0)
-			goto err;
-
-	} else {
-		dprintk(FE_DEBUG, 1, "Disable Gate");
-		STV090x_SETFIELD_Px(reg, I2CT_ON_FIELD, 0);
-		if ((STV090x_WRITE_DEMOD(state, I2CRPT, reg)) < 0)
-			goto err;
-	}
-
-	if (!enable) {
-		if (state->config->tuner_i2c_lock)
-			state->config->tuner_i2c_lock(&state->frontend, 0);
-		else
-			mutex_unlock(&state->internal->tuner_lock);
-	}
-
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	if (state->config->tuner_i2c_lock)
-		state->config->tuner_i2c_lock(&state->frontend, 0);
-	else
-		mutex_unlock(&state->internal->tuner_lock);
-	return -1;
-}
-
-static void stv090x_get_lock_tmg(struct stv090x_state *state)
-{
-	switch (state->algo) {
-	case STV090x_BLIND_SEARCH:
-		dprintk(FE_DEBUG, 1, "Blind Search");
-		if (state->srate <= 1500000) {  /*10Msps< SR <=15Msps*/
-			state->DemodTimeout = 1500;
-			state->FecTimeout = 400;
-		} else if (state->srate <= 5000000) {  /*10Msps< SR <=15Msps*/
-			state->DemodTimeout = 1000;
-			state->FecTimeout = 300;
-		} else {  /*SR >20Msps*/
-			state->DemodTimeout = 700;
-			state->FecTimeout = 100;
-		}
-		break;
-
-	case STV090x_COLD_SEARCH:
-	case STV090x_WARM_SEARCH:
-	default:
-		dprintk(FE_DEBUG, 1, "Normal Search");
-		if (state->srate <= 1000000) {  /*SR <=1Msps*/
-			state->DemodTimeout = 4500;
-			state->FecTimeout = 1700;
-		} else if (state->srate <= 2000000) { /*1Msps < SR <= 2Msps */
-			state->DemodTimeout = 2500;
-			state->FecTimeout = 1100;
-		} else if (state->srate <= 5000000) { /*2Msps < SR <= 5Msps */
-			state->DemodTimeout = 1000;
-			state->FecTimeout = 550;
-		} else if (state->srate <= 10000000) { /*5Msps < SR <= 10Msps */
-			state->DemodTimeout = 700;
-			state->FecTimeout = 250;
-		} else if (state->srate <= 20000000) { /*10Msps < SR <= 20Msps */
-			state->DemodTimeout = 400;
-			state->FecTimeout = 130;
-		} else {   /*SR >20Msps*/
-			state->DemodTimeout = 300;
-			state->FecTimeout = 100;
-		}
-		break;
-	}
-
-	if (state->algo == STV090x_WARM_SEARCH)
-		state->DemodTimeout /= 2;
-}
-
-static int stv090x_set_srate(struct stv090x_state *state, u32 srate)
-{
-	u32 sym;
-
-	if (srate > 60000000) {
-		sym  = (srate << 4); /* SR * 2^16 / master_clk */
-		sym /= (state->internal->mclk >> 12);
-	} else if (srate > 6000000) {
-		sym  = (srate << 6);
-		sym /= (state->internal->mclk >> 10);
-	} else {
-		sym  = (srate << 9);
-		sym /= (state->internal->mclk >> 7);
-	}
-
-	if (STV090x_WRITE_DEMOD(state, SFRINIT1, (sym >> 8) & 0x7f) < 0) /* MSB */
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, SFRINIT0, (sym & 0xff)) < 0) /* LSB */
-		goto err;
-
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_set_max_srate(struct stv090x_state *state, u32 clk, u32 srate)
-{
-	u32 sym;
-
-	srate = 105 * (srate / 100);
-	if (srate > 60000000) {
-		sym  = (srate << 4); /* SR * 2^16 / master_clk */
-		sym /= (state->internal->mclk >> 12);
-	} else if (srate > 6000000) {
-		sym  = (srate << 6);
-		sym /= (state->internal->mclk >> 10);
-	} else {
-		sym  = (srate << 9);
-		sym /= (state->internal->mclk >> 7);
-	}
-
-	if (sym < 0x7fff) {
-		if (STV090x_WRITE_DEMOD(state, SFRUP1, (sym >> 8) & 0x7f) < 0) /* MSB */
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, SFRUP0, sym & 0xff) < 0) /* LSB */
-			goto err;
-	} else {
-		if (STV090x_WRITE_DEMOD(state, SFRUP1, 0x7f) < 0) /* MSB */
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, SFRUP0, 0xff) < 0) /* LSB */
-			goto err;
-	}
-
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_set_min_srate(struct stv090x_state *state, u32 clk, u32 srate)
-{
-	u32 sym;
-
-	srate = 95 * (srate / 100);
-	if (srate > 60000000) {
-		sym  = (srate << 4); /* SR * 2^16 / master_clk */
-		sym /= (state->internal->mclk >> 12);
-	} else if (srate > 6000000) {
-		sym  = (srate << 6);
-		sym /= (state->internal->mclk >> 10);
-	} else {
-		sym  = (srate << 9);
-		sym /= (state->internal->mclk >> 7);
-	}
-
-	if (STV090x_WRITE_DEMOD(state, SFRLOW1, ((sym >> 8) & 0x7f)) < 0) /* MSB */
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, SFRLOW0, (sym & 0xff)) < 0) /* LSB */
-		goto err;
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static u32 stv090x_car_width(u32 srate, enum stv090x_rolloff rolloff)
-{
-	u32 ro;
-
-	switch (rolloff) {
-	case STV090x_RO_20:
-		ro = 20;
-		break;
-	case STV090x_RO_25:
-		ro = 25;
-		break;
-	case STV090x_RO_35:
-	default:
-		ro = 35;
-		break;
-	}
-
-	return srate + (srate * ro) / 100;
-}
-
-static int stv090x_set_vit_thacq(struct stv090x_state *state)
-{
-	if (STV090x_WRITE_DEMOD(state, VTH12, 0x96) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, VTH23, 0x64) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, VTH34, 0x36) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, VTH56, 0x23) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, VTH67, 0x1e) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, VTH78, 0x19) < 0)
-		goto err;
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_set_vit_thtracq(struct stv090x_state *state)
-{
-	if (STV090x_WRITE_DEMOD(state, VTH12, 0xd0) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, VTH23, 0x7d) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, VTH34, 0x53) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, VTH56, 0x2f) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, VTH67, 0x24) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, VTH78, 0x1f) < 0)
-		goto err;
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_set_viterbi(struct stv090x_state *state)
-{
-	switch (state->search_mode) {
-	case STV090x_SEARCH_AUTO:
-		if (STV090x_WRITE_DEMOD(state, FECM, 0x10) < 0) /* DVB-S and DVB-S2 */
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, PRVIT, 0x3f) < 0) /* all puncture rate */
-			goto err;
-		break;
-	case STV090x_SEARCH_DVBS1:
-		if (STV090x_WRITE_DEMOD(state, FECM, 0x00) < 0) /* disable DSS */
-			goto err;
-		switch (state->fec) {
-		case STV090x_PR12:
-			if (STV090x_WRITE_DEMOD(state, PRVIT, 0x01) < 0)
-				goto err;
-			break;
-
-		case STV090x_PR23:
-			if (STV090x_WRITE_DEMOD(state, PRVIT, 0x02) < 0)
-				goto err;
-			break;
-
-		case STV090x_PR34:
-			if (STV090x_WRITE_DEMOD(state, PRVIT, 0x04) < 0)
-				goto err;
-			break;
-
-		case STV090x_PR56:
-			if (STV090x_WRITE_DEMOD(state, PRVIT, 0x08) < 0)
-				goto err;
-			break;
-
-		case STV090x_PR78:
-			if (STV090x_WRITE_DEMOD(state, PRVIT, 0x20) < 0)
-				goto err;
-			break;
-
-		default:
-			if (STV090x_WRITE_DEMOD(state, PRVIT, 0x2f) < 0) /* all */
-				goto err;
-			break;
-		}
-		break;
-	case STV090x_SEARCH_DSS:
-		if (STV090x_WRITE_DEMOD(state, FECM, 0x80) < 0)
-			goto err;
-		switch (state->fec) {
-		case STV090x_PR12:
-			if (STV090x_WRITE_DEMOD(state, PRVIT, 0x01) < 0)
-				goto err;
-			break;
-
-		case STV090x_PR23:
-			if (STV090x_WRITE_DEMOD(state, PRVIT, 0x02) < 0)
-				goto err;
-			break;
-
-		case STV090x_PR67:
-			if (STV090x_WRITE_DEMOD(state, PRVIT, 0x10) < 0)
-				goto err;
-			break;
-
-		default:
-			if (STV090x_WRITE_DEMOD(state, PRVIT, 0x13) < 0) /* 1/2, 2/3, 6/7 */
-				goto err;
-			break;
-		}
-		break;
-	default:
-		break;
-	}
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_stop_modcod(struct stv090x_state *state)
-{
-	if (STV090x_WRITE_DEMOD(state, MODCODLST0, 0xff) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST1, 0xff) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST2, 0xff) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST3, 0xff) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST4, 0xff) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST5, 0xff) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST6, 0xff) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST7, 0xff) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST8, 0xff) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST9, 0xff) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLSTA, 0xff) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLSTB, 0xff) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLSTC, 0xff) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLSTD, 0xff) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLSTE, 0xff) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLSTF, 0xff) < 0)
-		goto err;
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_activate_modcod(struct stv090x_state *state)
-{
-	if (STV090x_WRITE_DEMOD(state, MODCODLST0, 0xff) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST1, 0xfc) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST2, 0xcc) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST3, 0xcc) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST4, 0xcc) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST5, 0xcc) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST6, 0xcc) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST7, 0xcc) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST8, 0xcc) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST9, 0xcc) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLSTA, 0xcc) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLSTB, 0xcc) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLSTC, 0xcc) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLSTD, 0xcc) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLSTE, 0xcc) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLSTF, 0xcf) < 0)
-		goto err;
-
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_activate_modcod_single(struct stv090x_state *state)
-{
-
-	if (STV090x_WRITE_DEMOD(state, MODCODLST0, 0xff) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST1, 0xf0) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST2, 0x00) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST3, 0x00) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST4, 0x00) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST5, 0x00) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST6, 0x00) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST7, 0x00) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST8, 0x00) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLST9, 0x00) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLSTA, 0x00) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLSTB, 0x00) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLSTC, 0x00) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLSTD, 0x00) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLSTE, 0x00) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, MODCODLSTF, 0x0f) < 0)
-		goto err;
-
-	return 0;
-
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_vitclk_ctl(struct stv090x_state *state, int enable)
-{
-	u32 reg;
-
-	switch (state->demod) {
-	case STV090x_DEMODULATOR_0:
-		mutex_lock(&state->internal->demod_lock);
-		reg = stv090x_read_reg(state, STV090x_STOPCLK2);
-		STV090x_SETFIELD(reg, STOP_CLKVIT1_FIELD, enable);
-		if (stv090x_write_reg(state, STV090x_STOPCLK2, reg) < 0)
-			goto err;
-		mutex_unlock(&state->internal->demod_lock);
-		break;
-
-	case STV090x_DEMODULATOR_1:
-		mutex_lock(&state->internal->demod_lock);
-		reg = stv090x_read_reg(state, STV090x_STOPCLK2);
-		STV090x_SETFIELD(reg, STOP_CLKVIT2_FIELD, enable);
-		if (stv090x_write_reg(state, STV090x_STOPCLK2, reg) < 0)
-			goto err;
-		mutex_unlock(&state->internal->demod_lock);
-		break;
-
-	default:
-		dprintk(FE_ERROR, 1, "Wrong demodulator!");
-		break;
-	}
-	return 0;
-err:
-	mutex_unlock(&state->internal->demod_lock);
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_dvbs_track_crl(struct stv090x_state *state)
-{
-	if (state->internal->dev_ver >= 0x30) {
-		/* Set ACLC BCLC optimised value vs SR */
-		if (state->srate >= 15000000) {
-			if (STV090x_WRITE_DEMOD(state, ACLC, 0x2b) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, BCLC, 0x1a) < 0)
-				goto err;
-		} else if ((state->srate >= 7000000) && (15000000 > state->srate)) {
-			if (STV090x_WRITE_DEMOD(state, ACLC, 0x0c) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, BCLC, 0x1b) < 0)
-				goto err;
-		} else if (state->srate < 7000000) {
-			if (STV090x_WRITE_DEMOD(state, ACLC, 0x2c) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, BCLC, 0x1c) < 0)
-				goto err;
-		}
-
-	} else {
-		/* Cut 2.0 */
-		if (STV090x_WRITE_DEMOD(state, ACLC, 0x1a) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, BCLC, 0x09) < 0)
-			goto err;
-	}
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_delivery_search(struct stv090x_state *state)
-{
-	u32 reg;
-
-	switch (state->search_mode) {
-	case STV090x_SEARCH_DVBS1:
-	case STV090x_SEARCH_DSS:
-		reg = STV090x_READ_DEMOD(state, DMDCFGMD);
-		STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1);
-		STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 0);
-		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
-			goto err;
-
-		/* Activate Viterbi decoder in legacy search,
-		 * do not use FRESVIT1, might impact VITERBI2
-		 */
-		if (stv090x_vitclk_ctl(state, 0) < 0)
-			goto err;
-
-		if (stv090x_dvbs_track_crl(state) < 0)
-			goto err;
-
-		if (STV090x_WRITE_DEMOD(state, CAR2CFG, 0x22) < 0) /* disable DVB-S2 */
-			goto err;
-
-		if (stv090x_set_vit_thacq(state) < 0)
-			goto err;
-		if (stv090x_set_viterbi(state) < 0)
-			goto err;
-		break;
-
-	case STV090x_SEARCH_DVBS2:
-		reg = STV090x_READ_DEMOD(state, DMDCFGMD);
-		STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 0);
-		STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 0);
-		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
-			goto err;
-		STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1);
-		STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 1);
-		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
-			goto err;
-
-		if (stv090x_vitclk_ctl(state, 1) < 0)
-			goto err;
-
-		if (STV090x_WRITE_DEMOD(state, ACLC, 0x1a) < 0) /* stop DVB-S CR loop */
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, BCLC, 0x09) < 0)
-			goto err;
-
-		if (state->internal->dev_ver <= 0x20) {
-			/* enable S2 carrier loop */
-			if (STV090x_WRITE_DEMOD(state, CAR2CFG, 0x26) < 0)
-				goto err;
-		} else {
-			/* > Cut 3: Stop carrier 3 */
-			if (STV090x_WRITE_DEMOD(state, CAR2CFG, 0x66) < 0)
-				goto err;
-		}
-
-		if (state->demod_mode != STV090x_SINGLE) {
-			/* Cut 2: enable link during search */
-			if (stv090x_activate_modcod(state) < 0)
-				goto err;
-		} else {
-			/* Single demodulator
-			 * Authorize SHORT and LONG frames,
-			 * QPSK, 8PSK, 16APSK and 32APSK
-			 */
-			if (stv090x_activate_modcod_single(state) < 0)
-				goto err;
-		}
-
-		if (stv090x_set_vit_thtracq(state) < 0)
-			goto err;
-		break;
-
-	case STV090x_SEARCH_AUTO:
-	default:
-		/* enable DVB-S2 and DVB-S2 in Auto MODE */
-		reg = STV090x_READ_DEMOD(state, DMDCFGMD);
-		STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 0);
-		STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 0);
-		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
-			goto err;
-		STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1);
-		STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 1);
-		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
-			goto err;
-
-		if (stv090x_vitclk_ctl(state, 0) < 0)
-			goto err;
-
-		if (stv090x_dvbs_track_crl(state) < 0)
-			goto err;
-
-		if (state->internal->dev_ver <= 0x20) {
-			/* enable S2 carrier loop */
-			if (STV090x_WRITE_DEMOD(state, CAR2CFG, 0x26) < 0)
-				goto err;
-		} else {
-			/* > Cut 3: Stop carrier 3 */
-			if (STV090x_WRITE_DEMOD(state, CAR2CFG, 0x66) < 0)
-				goto err;
-		}
-
-		if (state->demod_mode != STV090x_SINGLE) {
-			/* Cut 2: enable link during search */
-			if (stv090x_activate_modcod(state) < 0)
-				goto err;
-		} else {
-			/* Single demodulator
-			 * Authorize SHORT and LONG frames,
-			 * QPSK, 8PSK, 16APSK and 32APSK
-			 */
-			if (stv090x_activate_modcod_single(state) < 0)
-				goto err;
-		}
-
-		if (stv090x_set_vit_thacq(state) < 0)
-			goto err;
-
-		if (stv090x_set_viterbi(state) < 0)
-			goto err;
-		break;
-	}
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_start_search(struct stv090x_state *state)
-{
-	u32 reg, freq_abs;
-	s16 freq;
-
-	/* Reset demodulator */
-	reg = STV090x_READ_DEMOD(state, DMDISTATE);
-	STV090x_SETFIELD_Px(reg, I2C_DEMOD_MODE_FIELD, 0x1f);
-	if (STV090x_WRITE_DEMOD(state, DMDISTATE, reg) < 0)
-		goto err;
-
-	if (state->internal->dev_ver <= 0x20) {
-		if (state->srate <= 5000000) {
-			if (STV090x_WRITE_DEMOD(state, CARCFG, 0x44) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, CFRUP1, 0x0f) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, CFRUP0, 0xff) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, CFRLOW1, 0xf0) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, CFRLOW0, 0x00) < 0)
-				goto err;
-
-			/*enlarge the timing bandwidth for Low SR*/
-			if (STV090x_WRITE_DEMOD(state, RTCS2, 0x68) < 0)
-				goto err;
-		} else {
-			/* If the symbol rate is >5 Msps
-			Set The carrier search up and low to auto mode */
-			if (STV090x_WRITE_DEMOD(state, CARCFG, 0xc4) < 0)
-				goto err;
-			/*reduce the timing bandwidth for high SR*/
-			if (STV090x_WRITE_DEMOD(state, RTCS2, 0x44) < 0)
-				goto err;
-		}
-	} else {
-		/* >= Cut 3 */
-		if (state->srate <= 5000000) {
-			/* enlarge the timing bandwidth for Low SR */
-			STV090x_WRITE_DEMOD(state, RTCS2, 0x68);
-		} else {
-			/* reduce timing bandwidth for high SR */
-			STV090x_WRITE_DEMOD(state, RTCS2, 0x44);
-		}
-
-		/* Set CFR min and max to manual mode */
-		STV090x_WRITE_DEMOD(state, CARCFG, 0x46);
-
-		if (state->algo == STV090x_WARM_SEARCH) {
-			/* WARM Start
-			 * CFR min = -1MHz,
-			 * CFR max = +1MHz
-			 */
-			freq_abs  = 1000 << 16;
-			freq_abs /= (state->internal->mclk / 1000);
-			freq      = (s16) freq_abs;
-		} else {
-			/* COLD Start
-			 * CFR min =- (SearchRange / 2 + 600KHz)
-			 * CFR max = +(SearchRange / 2 + 600KHz)
-			 * (600KHz for the tuner step size)
-			 */
-			freq_abs  = (state->search_range / 2000) + 600;
-			freq_abs  = freq_abs << 16;
-			freq_abs /= (state->internal->mclk / 1000);
-			freq      = (s16) freq_abs;
-		}
-
-		if (STV090x_WRITE_DEMOD(state, CFRUP1, MSB(freq)) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, CFRUP0, LSB(freq)) < 0)
-			goto err;
-
-		freq *= -1;
-
-		if (STV090x_WRITE_DEMOD(state, CFRLOW1, MSB(freq)) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, CFRLOW0, LSB(freq)) < 0)
-			goto err;
-
-	}
-
-	if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0) < 0)
-		goto err;
-
-	if (state->internal->dev_ver >= 0x20) {
-		if (STV090x_WRITE_DEMOD(state, EQUALCFG, 0x41) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, FFECFG, 0x41) < 0)
-			goto err;
-
-		if ((state->search_mode == STV090x_SEARCH_DVBS1)	||
-			(state->search_mode == STV090x_SEARCH_DSS)	||
-			(state->search_mode == STV090x_SEARCH_AUTO)) {
-
-			if (STV090x_WRITE_DEMOD(state, VITSCALE, 0x82) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, VAVSRVIT, 0x00) < 0)
-				goto err;
-		}
-	}
-
-	if (STV090x_WRITE_DEMOD(state, SFRSTEP, 0x00) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, TMGTHRISE, 0xe0) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, TMGTHFALL, 0xc0) < 0)
-		goto err;
-
-	reg = STV090x_READ_DEMOD(state, DMDCFGMD);
-	STV090x_SETFIELD_Px(reg, SCAN_ENABLE_FIELD, 0);
-	STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 0);
-	if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
-		goto err;
-	reg = STV090x_READ_DEMOD(state, DMDCFG2);
-	STV090x_SETFIELD_Px(reg, S1S2_SEQUENTIAL_FIELD, 0x0);
-	if (STV090x_WRITE_DEMOD(state, DMDCFG2, reg) < 0)
-		goto err;
-
-	if (STV090x_WRITE_DEMOD(state, RTC, 0x88) < 0)
-		goto err;
-
-	if (state->internal->dev_ver >= 0x20) {
-		/*Frequency offset detector setting*/
-		if (state->srate < 2000000) {
-			if (state->internal->dev_ver <= 0x20) {
-				/* Cut 2 */
-				if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x39) < 0)
-					goto err;
-			} else {
-				/* Cut 3 */
-				if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x89) < 0)
-					goto err;
-			}
-			if (STV090x_WRITE_DEMOD(state, CARHDR, 0x40) < 0)
-				goto err;
-		} else if (state->srate < 10000000) {
-			if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x4c) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, CARHDR, 0x20) < 0)
-				goto err;
-		} else {
-			if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x4b) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, CARHDR, 0x20) < 0)
-				goto err;
-		}
-	} else {
-		if (state->srate < 10000000) {
-			if (STV090x_WRITE_DEMOD(state, CARFREQ, 0xef) < 0)
-				goto err;
-		} else {
-			if (STV090x_WRITE_DEMOD(state, CARFREQ, 0xed) < 0)
-				goto err;
-		}
-	}
-
-	switch (state->algo) {
-	case STV090x_WARM_SEARCH:
-		/* The symbol rate and the exact
-		 * carrier Frequency are known
-		 */
-		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x18) < 0)
-			goto err;
-		break;
-
-	case STV090x_COLD_SEARCH:
-		/* The symbol rate is known */
-		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
-			goto err;
-		break;
-
-	default:
-		break;
-	}
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_get_agc2_min_level(struct stv090x_state *state)
-{
-	u32 agc2_min = 0xffff, agc2 = 0, freq_init, freq_step, reg;
-	s32 i, j, steps, dir;
-
-	if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x38) < 0)
-		goto err;
-	reg = STV090x_READ_DEMOD(state, DMDCFGMD);
-	STV090x_SETFIELD_Px(reg, SCAN_ENABLE_FIELD, 0);
-	STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 0);
-	if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
-		goto err;
-
-	if (STV090x_WRITE_DEMOD(state, SFRUP1, 0x83) < 0) /* SR = 65 Msps Max */
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, SFRUP0, 0xc0) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, SFRLOW1, 0x82) < 0) /* SR= 400 ksps Min */
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, SFRLOW0, 0xa0) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, DMDTOM, 0x00) < 0) /* stop acq @ coarse carrier state */
-		goto err;
-	if (stv090x_set_srate(state, 1000000) < 0)
-		goto err;
-
-	steps  = state->search_range / 1000000;
-	if (steps <= 0)
-		steps = 1;
-
-	dir = 1;
-	freq_step = (1000000 * 256) / (state->internal->mclk / 256);
-	freq_init = 0;
-
-	for (i = 0; i < steps; i++) {
-		if (dir > 0)
-			freq_init = freq_init + (freq_step * i);
-		else
-			freq_init = freq_init - (freq_step * i);
-
-		dir *= -1;
-
-		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x5c) < 0) /* Demod RESET */
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, CFRINIT1, (freq_init >> 8) & 0xff) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, CFRINIT0, freq_init & 0xff) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x58) < 0) /* Demod RESET */
-			goto err;
-		msleep(10);
-
-		agc2 = 0;
-		for (j = 0; j < 10; j++) {
-			agc2 += (STV090x_READ_DEMOD(state, AGC2I1) << 8) |
-				STV090x_READ_DEMOD(state, AGC2I0);
-		}
-		agc2 /= 10;
-		if (agc2 < agc2_min)
-			agc2_min = agc2;
-	}
-
-	return agc2_min;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static u32 stv090x_get_srate(struct stv090x_state *state, u32 clk)
-{
-	u8 r3, r2, r1, r0;
-	s32 srate, int_1, int_2, tmp_1, tmp_2;
-
-	r3 = STV090x_READ_DEMOD(state, SFR3);
-	r2 = STV090x_READ_DEMOD(state, SFR2);
-	r1 = STV090x_READ_DEMOD(state, SFR1);
-	r0 = STV090x_READ_DEMOD(state, SFR0);
-
-	srate = ((r3 << 24) | (r2 << 16) | (r1 <<  8) | r0);
-
-	int_1 = clk >> 16;
-	int_2 = srate >> 16;
-
-	tmp_1 = clk % 0x10000;
-	tmp_2 = srate % 0x10000;
-
-	srate = (int_1 * int_2) +
-		((int_1 * tmp_2) >> 16) +
-		((int_2 * tmp_1) >> 16);
-
-	return srate;
-}
-
-static u32 stv090x_srate_srch_coarse(struct stv090x_state *state)
-{
-	struct dvb_frontend *fe = &state->frontend;
-
-	int tmg_lock = 0, i;
-	s32 tmg_cpt = 0, dir = 1, steps, cur_step = 0, freq;
-	u32 srate_coarse = 0, agc2 = 0, car_step = 1200, reg;
-	u32 agc2th;
-
-	if (state->internal->dev_ver >= 0x30)
-		agc2th = 0x2e00;
-	else
-		agc2th = 0x1f00;
-
-	reg = STV090x_READ_DEMOD(state, DMDISTATE);
-	STV090x_SETFIELD_Px(reg, I2C_DEMOD_MODE_FIELD, 0x1f); /* Demod RESET */
-	if (STV090x_WRITE_DEMOD(state, DMDISTATE, reg) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, TMGCFG, 0x12) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, TMGCFG2, 0xc0) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, TMGTHRISE, 0xf0) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, TMGTHFALL, 0xe0) < 0)
-		goto err;
-	reg = STV090x_READ_DEMOD(state, DMDCFGMD);
-	STV090x_SETFIELD_Px(reg, SCAN_ENABLE_FIELD, 1);
-	STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 0);
-	if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
-		goto err;
-
-	if (STV090x_WRITE_DEMOD(state, SFRUP1, 0x83) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, SFRUP0, 0xc0) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, SFRLOW1, 0x82) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, SFRLOW0, 0xa0) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, DMDTOM, 0x00) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x50) < 0)
-		goto err;
-
-	if (state->internal->dev_ver >= 0x30) {
-		if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x99) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, SFRSTEP, 0x98) < 0)
-			goto err;
-
-	} else if (state->internal->dev_ver >= 0x20) {
-		if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x6a) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, SFRSTEP, 0x95) < 0)
-			goto err;
-	}
-
-	if (state->srate <= 2000000)
-		car_step = 1000;
-	else if (state->srate <= 5000000)
-		car_step = 2000;
-	else if (state->srate <= 12000000)
-		car_step = 3000;
-	else
-		car_step = 5000;
-
-	steps  = -1 + ((state->search_range / 1000) / car_step);
-	steps /= 2;
-	steps  = (2 * steps) + 1;
-	if (steps < 0)
-		steps = 1;
-	else if (steps > 10) {
-		steps = 11;
-		car_step = (state->search_range / 1000) / 10;
-	}
-	cur_step = 0;
-	dir = 1;
-	freq = state->frequency;
-
-	while ((!tmg_lock) && (cur_step < steps)) {
-		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x5f) < 0) /* Demod RESET */
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0x00) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0x00) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, SFRINIT1, 0x00) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, SFRINIT0, 0x00) < 0)
-			goto err;
-		/* trigger acquisition */
-		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x40) < 0)
-			goto err;
-		msleep(50);
-		for (i = 0; i < 10; i++) {
-			reg = STV090x_READ_DEMOD(state, DSTATUS);
-			if (STV090x_GETFIELD_Px(reg, TMGLOCK_QUALITY_FIELD) >= 2)
-				tmg_cpt++;
-			agc2 += (STV090x_READ_DEMOD(state, AGC2I1) << 8) |
-				STV090x_READ_DEMOD(state, AGC2I0);
-		}
-		agc2 /= 10;
-		srate_coarse = stv090x_get_srate(state, state->internal->mclk);
-		cur_step++;
-		dir *= -1;
-		if ((tmg_cpt >= 5) && (agc2 < agc2th) &&
-		    (srate_coarse < 50000000) && (srate_coarse > 850000))
-			tmg_lock = 1;
-		else if (cur_step < steps) {
-			if (dir > 0)
-				freq += cur_step * car_step;
-			else
-				freq -= cur_step * car_step;
-
-			/* Setup tuner */
-			if (stv090x_i2c_gate_ctrl(state, 1) < 0)
-				goto err;
-
-			if (state->config->tuner_set_frequency) {
-				if (state->config->tuner_set_frequency(fe, freq) < 0)
-					goto err_gateoff;
-			}
-
-			if (state->config->tuner_set_bandwidth) {
-				if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0)
-					goto err_gateoff;
-			}
-
-			if (stv090x_i2c_gate_ctrl(state, 0) < 0)
-				goto err;
-
-			msleep(50);
-
-			if (stv090x_i2c_gate_ctrl(state, 1) < 0)
-				goto err;
-
-			if (state->config->tuner_get_status) {
-				if (state->config->tuner_get_status(fe, &reg) < 0)
-					goto err_gateoff;
-			}
-
-			if (reg)
-				dprintk(FE_DEBUG, 1, "Tuner phase locked");
-			else
-				dprintk(FE_DEBUG, 1, "Tuner unlocked");
-
-			if (stv090x_i2c_gate_ctrl(state, 0) < 0)
-				goto err;
-
-		}
-	}
-	if (!tmg_lock)
-		srate_coarse = 0;
-	else
-		srate_coarse = stv090x_get_srate(state, state->internal->mclk);
-
-	return srate_coarse;
-
-err_gateoff:
-	stv090x_i2c_gate_ctrl(state, 0);
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static u32 stv090x_srate_srch_fine(struct stv090x_state *state)
-{
-	u32 srate_coarse, freq_coarse, sym, reg;
-
-	srate_coarse = stv090x_get_srate(state, state->internal->mclk);
-	freq_coarse  = STV090x_READ_DEMOD(state, CFR2) << 8;
-	freq_coarse |= STV090x_READ_DEMOD(state, CFR1);
-	sym = 13 * (srate_coarse / 10); /* SFRUP = SFR + 30% */
-
-	if (sym < state->srate)
-		srate_coarse = 0;
-	else {
-		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0) /* Demod RESET */
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, TMGCFG2, 0xc1) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, TMGTHRISE, 0x20) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, TMGTHFALL, 0x00) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, TMGCFG, 0xd2) < 0)
-			goto err;
-		reg = STV090x_READ_DEMOD(state, DMDCFGMD);
-		STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 0x00);
-		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
-			goto err;
-
-		if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x38) < 0)
-			goto err;
-
-		if (state->internal->dev_ver >= 0x30) {
-			if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x79) < 0)
-				goto err;
-		} else if (state->internal->dev_ver >= 0x20) {
-			if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x49) < 0)
-				goto err;
-		}
-
-		if (srate_coarse > 3000000) {
-			sym  = 13 * (srate_coarse / 10); /* SFRUP = SFR + 30% */
-			sym  = (sym / 1000) * 65536;
-			sym /= (state->internal->mclk / 1000);
-			if (STV090x_WRITE_DEMOD(state, SFRUP1, (sym >> 8) & 0x7f) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, SFRUP0, sym & 0xff) < 0)
-				goto err;
-			sym  = 10 * (srate_coarse / 13); /* SFRLOW = SFR - 30% */
-			sym  = (sym / 1000) * 65536;
-			sym /= (state->internal->mclk / 1000);
-			if (STV090x_WRITE_DEMOD(state, SFRLOW1, (sym >> 8) & 0x7f) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, SFRLOW0, sym & 0xff) < 0)
-				goto err;
-			sym  = (srate_coarse / 1000) * 65536;
-			sym /= (state->internal->mclk / 1000);
-			if (STV090x_WRITE_DEMOD(state, SFRINIT1, (sym >> 8) & 0xff) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, SFRINIT0, sym & 0xff) < 0)
-				goto err;
-		} else {
-			sym  = 13 * (srate_coarse / 10); /* SFRUP = SFR + 30% */
-			sym  = (sym / 100) * 65536;
-			sym /= (state->internal->mclk / 100);
-			if (STV090x_WRITE_DEMOD(state, SFRUP1, (sym >> 8) & 0x7f) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, SFRUP0, sym & 0xff) < 0)
-				goto err;
-			sym  = 10 * (srate_coarse / 14); /* SFRLOW = SFR - 30% */
-			sym  = (sym / 100) * 65536;
-			sym /= (state->internal->mclk / 100);
-			if (STV090x_WRITE_DEMOD(state, SFRLOW1, (sym >> 8) & 0x7f) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, SFRLOW0, sym & 0xff) < 0)
-				goto err;
-			sym  = (srate_coarse / 100) * 65536;
-			sym /= (state->internal->mclk / 100);
-			if (STV090x_WRITE_DEMOD(state, SFRINIT1, (sym >> 8) & 0xff) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, SFRINIT0, sym & 0xff) < 0)
-				goto err;
-		}
-		if (STV090x_WRITE_DEMOD(state, DMDTOM, 0x20) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, CFRINIT1, (freq_coarse >> 8) & 0xff) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, CFRINIT0, freq_coarse & 0xff) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0) /* trigger acquisition */
-			goto err;
-	}
-
-	return srate_coarse;
-
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_get_dmdlock(struct stv090x_state *state, s32 timeout)
-{
-	s32 timer = 0, lock = 0;
-	u32 reg;
-	u8 stat;
-
-	while ((timer < timeout) && (!lock)) {
-		reg = STV090x_READ_DEMOD(state, DMDSTATE);
-		stat = STV090x_GETFIELD_Px(reg, HEADER_MODE_FIELD);
-
-		switch (stat) {
-		case 0: /* searching */
-		case 1: /* first PLH detected */
-		default:
-			dprintk(FE_DEBUG, 1, "Demodulator searching ..");
-			lock = 0;
-			break;
-		case 2: /* DVB-S2 mode */
-		case 3: /* DVB-S1/legacy mode */
-			reg = STV090x_READ_DEMOD(state, DSTATUS);
-			lock = STV090x_GETFIELD_Px(reg, LOCK_DEFINITIF_FIELD);
-			break;
-		}
-
-		if (!lock)
-			msleep(10);
-		else
-			dprintk(FE_DEBUG, 1, "Demodulator acquired LOCK");
-
-		timer += 10;
-	}
-	return lock;
-}
-
-static int stv090x_blind_search(struct stv090x_state *state)
-{
-	u32 agc2, reg, srate_coarse;
-	s32 cpt_fail, agc2_ovflw, i;
-	u8 k_ref, k_max, k_min;
-	int coarse_fail = 0;
-	int lock;
-
-	k_max = 110;
-	k_min = 10;
-
-	agc2 = stv090x_get_agc2_min_level(state);
-
-	if (agc2 > STV090x_SEARCH_AGC2_TH(state->internal->dev_ver)) {
-		lock = 0;
-	} else {
-
-		if (state->internal->dev_ver <= 0x20) {
-			if (STV090x_WRITE_DEMOD(state, CARCFG, 0xc4) < 0)
-				goto err;
-		} else {
-			/* > Cut 3 */
-			if (STV090x_WRITE_DEMOD(state, CARCFG, 0x06) < 0)
-				goto err;
-		}
-
-		if (STV090x_WRITE_DEMOD(state, RTCS2, 0x44) < 0)
-			goto err;
-
-		if (state->internal->dev_ver >= 0x20) {
-			if (STV090x_WRITE_DEMOD(state, EQUALCFG, 0x41) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, FFECFG, 0x41) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, VITSCALE, 0x82) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, VAVSRVIT, 0x00) < 0) /* set viterbi hysteresis */
-				goto err;
-		}
-
-		k_ref = k_max;
-		do {
-			if (STV090x_WRITE_DEMOD(state, KREFTMG, k_ref) < 0)
-				goto err;
-			if (stv090x_srate_srch_coarse(state) != 0) {
-				srate_coarse = stv090x_srate_srch_fine(state);
-				if (srate_coarse != 0) {
-					stv090x_get_lock_tmg(state);
-					lock = stv090x_get_dmdlock(state,
-							state->DemodTimeout);
-				} else {
-					lock = 0;
-				}
-			} else {
-				cpt_fail = 0;
-				agc2_ovflw = 0;
-				for (i = 0; i < 10; i++) {
-					agc2 += (STV090x_READ_DEMOD(state, AGC2I1) << 8) |
-						STV090x_READ_DEMOD(state, AGC2I0);
-					if (agc2 >= 0xff00)
-						agc2_ovflw++;
-					reg = STV090x_READ_DEMOD(state, DSTATUS2);
-					if ((STV090x_GETFIELD_Px(reg, CFR_OVERFLOW_FIELD) == 0x01) &&
-					    (STV090x_GETFIELD_Px(reg, DEMOD_DELOCK_FIELD) == 0x01))
-
-						cpt_fail++;
-				}
-				if ((cpt_fail > 7) || (agc2_ovflw > 7))
-					coarse_fail = 1;
-
-				lock = 0;
-			}
-			k_ref -= 20;
-		} while ((k_ref >= k_min) && (!lock) && (!coarse_fail));
-	}
-
-	return lock;
-
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_chk_tmg(struct stv090x_state *state)
-{
-	u32 reg;
-	s32 tmg_cpt = 0, i;
-	u8 freq, tmg_thh, tmg_thl;
-	int tmg_lock = 0;
-
-	freq = STV090x_READ_DEMOD(state, CARFREQ);
-	tmg_thh = STV090x_READ_DEMOD(state, TMGTHRISE);
-	tmg_thl = STV090x_READ_DEMOD(state, TMGTHFALL);
-	if (STV090x_WRITE_DEMOD(state, TMGTHRISE, 0x20) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, TMGTHFALL, 0x00) < 0)
-		goto err;
-
-	reg = STV090x_READ_DEMOD(state, DMDCFGMD);
-	STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 0x00); /* stop carrier offset search */
-	if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, RTC, 0x80) < 0)
-		goto err;
-
-	if (STV090x_WRITE_DEMOD(state, RTCS2, 0x40) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x00) < 0)
-		goto err;
-
-	if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0x00) < 0) /* set car ofset to 0 */
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0x00) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x65) < 0)
-		goto err;
-
-	if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x18) < 0) /* trigger acquisition */
-		goto err;
-	msleep(10);
-
-	for (i = 0; i < 10; i++) {
-		reg = STV090x_READ_DEMOD(state, DSTATUS);
-		if (STV090x_GETFIELD_Px(reg, TMGLOCK_QUALITY_FIELD) >= 2)
-			tmg_cpt++;
-		msleep(1);
-	}
-	if (tmg_cpt >= 3)
-		tmg_lock = 1;
-
-	if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x38) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, RTC, 0x88) < 0) /* DVB-S1 timing */
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, RTCS2, 0x68) < 0) /* DVB-S2 timing */
-		goto err;
-
-	if (STV090x_WRITE_DEMOD(state, CARFREQ, freq) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, TMGTHRISE, tmg_thh) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, TMGTHFALL, tmg_thl) < 0)
-		goto err;
-
-	return	tmg_lock;
-
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_get_coldlock(struct stv090x_state *state, s32 timeout_dmd)
-{
-	struct dvb_frontend *fe = &state->frontend;
-
-	u32 reg;
-	s32 car_step, steps, cur_step, dir, freq, timeout_lock;
-	int lock = 0;
-
-	if (state->srate >= 10000000)
-		timeout_lock = timeout_dmd / 3;
-	else
-		timeout_lock = timeout_dmd / 2;
-
-	lock = stv090x_get_dmdlock(state, timeout_lock); /* cold start wait */
-	if (!lock) {
-		if (state->srate >= 10000000) {
-			if (stv090x_chk_tmg(state)) {
-				if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
-					goto err;
-				if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
-					goto err;
-				lock = stv090x_get_dmdlock(state, timeout_dmd);
-			} else {
-				lock = 0;
-			}
-		} else {
-			if (state->srate <= 4000000)
-				car_step = 1000;
-			else if (state->srate <= 7000000)
-				car_step = 2000;
-			else if (state->srate <= 10000000)
-				car_step = 3000;
-			else
-				car_step = 5000;
-
-			steps  = (state->search_range / 1000) / car_step;
-			steps /= 2;
-			steps  = 2 * (steps + 1);
-			if (steps < 0)
-				steps = 2;
-			else if (steps > 12)
-				steps = 12;
-
-			cur_step = 1;
-			dir = 1;
-
-			if (!lock) {
-				freq = state->frequency;
-				state->tuner_bw = stv090x_car_width(state->srate, state->rolloff) + state->srate;
-				while ((cur_step <= steps) && (!lock)) {
-					if (dir > 0)
-						freq += cur_step * car_step;
-					else
-						freq -= cur_step * car_step;
-
-					/* Setup tuner */
-					if (stv090x_i2c_gate_ctrl(state, 1) < 0)
-						goto err;
-
-					if (state->config->tuner_set_frequency) {
-						if (state->config->tuner_set_frequency(fe, freq) < 0)
-							goto err_gateoff;
-					}
-
-					if (state->config->tuner_set_bandwidth) {
-						if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0)
-							goto err_gateoff;
-					}
-
-					if (stv090x_i2c_gate_ctrl(state, 0) < 0)
-						goto err;
-
-					msleep(50);
-
-					if (stv090x_i2c_gate_ctrl(state, 1) < 0)
-						goto err;
-
-					if (state->config->tuner_get_status) {
-						if (state->config->tuner_get_status(fe, &reg) < 0)
-							goto err_gateoff;
-					}
-
-					if (reg)
-						dprintk(FE_DEBUG, 1, "Tuner phase locked");
-					else
-						dprintk(FE_DEBUG, 1, "Tuner unlocked");
-
-					if (stv090x_i2c_gate_ctrl(state, 0) < 0)
-						goto err;
-
-					STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1c);
-					if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0x00) < 0)
-						goto err;
-					if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0x00) < 0)
-						goto err;
-					if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
-						goto err;
-					if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
-						goto err;
-					lock = stv090x_get_dmdlock(state, (timeout_dmd / 3));
-
-					dir *= -1;
-					cur_step++;
-				}
-			}
-		}
-	}
-
-	return lock;
-
-err_gateoff:
-	stv090x_i2c_gate_ctrl(state, 0);
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_get_loop_params(struct stv090x_state *state, s32 *freq_inc, s32 *timeout_sw, s32 *steps)
-{
-	s32 timeout, inc, steps_max, srate, car_max;
-
-	srate = state->srate;
-	car_max = state->search_range / 1000;
-	car_max += car_max / 10;
-	car_max  = 65536 * (car_max / 2);
-	car_max /= (state->internal->mclk / 1000);
-
-	if (car_max > 0x4000)
-		car_max = 0x4000 ; /* maxcarrier should be<= +-1/4 Mclk */
-
-	inc  = srate;
-	inc /= state->internal->mclk / 1000;
-	inc *= 256;
-	inc *= 256;
-	inc /= 1000;
-
-	switch (state->search_mode) {
-	case STV090x_SEARCH_DVBS1:
-	case STV090x_SEARCH_DSS:
-		inc *= 3; /* freq step = 3% of srate */
-		timeout = 20;
-		break;
-
-	case STV090x_SEARCH_DVBS2:
-		inc *= 4;
-		timeout = 25;
-		break;
-
-	case STV090x_SEARCH_AUTO:
-	default:
-		inc *= 3;
-		timeout = 25;
-		break;
-	}
-	inc /= 100;
-	if ((inc > car_max) || (inc < 0))
-		inc = car_max / 2; /* increment <= 1/8 Mclk */
-
-	timeout *= 27500; /* 27.5 Msps reference */
-	if (srate > 0)
-		timeout /= (srate / 1000);
-
-	if ((timeout > 100) || (timeout < 0))
-		timeout = 100;
-
-	steps_max = (car_max / inc) + 1; /* min steps = 3 */
-	if ((steps_max > 100) || (steps_max < 0)) {
-		steps_max = 100; /* max steps <= 100 */
-		inc = car_max / steps_max;
-	}
-	*freq_inc = inc;
-	*timeout_sw = timeout;
-	*steps = steps_max;
-
-	return 0;
-}
-
-static int stv090x_chk_signal(struct stv090x_state *state)
-{
-	s32 offst_car, agc2, car_max;
-	int no_signal;
-
-	offst_car  = STV090x_READ_DEMOD(state, CFR2) << 8;
-	offst_car |= STV090x_READ_DEMOD(state, CFR1);
-	offst_car = comp2(offst_car, 16);
-
-	agc2  = STV090x_READ_DEMOD(state, AGC2I1) << 8;
-	agc2 |= STV090x_READ_DEMOD(state, AGC2I0);
-	car_max = state->search_range / 1000;
-
-	car_max += (car_max / 10); /* 10% margin */
-	car_max  = (65536 * car_max / 2);
-	car_max /= state->internal->mclk / 1000;
-
-	if (car_max > 0x4000)
-		car_max = 0x4000;
-
-	if ((agc2 > 0x2000) || (offst_car > 2 * car_max) || (offst_car < -2 * car_max)) {
-		no_signal = 1;
-		dprintk(FE_DEBUG, 1, "No Signal");
-	} else {
-		no_signal = 0;
-		dprintk(FE_DEBUG, 1, "Found Signal");
-	}
-
-	return no_signal;
-}
-
-static int stv090x_search_car_loop(struct stv090x_state *state, s32 inc, s32 timeout, int zigzag, s32 steps_max)
-{
-	int no_signal, lock = 0;
-	s32 cpt_step = 0, offst_freq, car_max;
-	u32 reg;
-
-	car_max  = state->search_range / 1000;
-	car_max += (car_max / 10);
-	car_max  = (65536 * car_max / 2);
-	car_max /= (state->internal->mclk / 1000);
-	if (car_max > 0x4000)
-		car_max = 0x4000;
-
-	if (zigzag)
-		offst_freq = 0;
-	else
-		offst_freq = -car_max + inc;
-
-	do {
-		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1c) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, CFRINIT1, ((offst_freq / 256) & 0xff)) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, CFRINIT0, offst_freq & 0xff) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x18) < 0)
-			goto err;
-
-		reg = STV090x_READ_DEMOD(state, PDELCTRL1);
-		STV090x_SETFIELD_Px(reg, ALGOSWRST_FIELD, 0x1); /* stop DVB-S2 packet delin */
-		if (STV090x_WRITE_DEMOD(state, PDELCTRL1, reg) < 0)
-			goto err;
-
-		if (zigzag) {
-			if (offst_freq >= 0)
-				offst_freq = -offst_freq - 2 * inc;
-			else
-				offst_freq = -offst_freq;
-		} else {
-			offst_freq += 2 * inc;
-		}
-
-		cpt_step++;
-
-		lock = stv090x_get_dmdlock(state, timeout);
-		no_signal = stv090x_chk_signal(state);
-
-	} while ((!lock) &&
-		 (!no_signal) &&
-		  ((offst_freq - inc) < car_max) &&
-		  ((offst_freq + inc) > -car_max) &&
-		  (cpt_step < steps_max));
-
-	reg = STV090x_READ_DEMOD(state, PDELCTRL1);
-	STV090x_SETFIELD_Px(reg, ALGOSWRST_FIELD, 0);
-	if (STV090x_WRITE_DEMOD(state, PDELCTRL1, reg) < 0)
-			goto err;
-
-	return lock;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_sw_algo(struct stv090x_state *state)
-{
-	int no_signal, zigzag, lock = 0;
-	u32 reg;
-
-	s32 dvbs2_fly_wheel;
-	s32 inc, timeout_step, trials, steps_max;
-
-	/* get params */
-	stv090x_get_loop_params(state, &inc, &timeout_step, &steps_max);
-
-	switch (state->search_mode) {
-	case STV090x_SEARCH_DVBS1:
-	case STV090x_SEARCH_DSS:
-		/* accelerate the frequency detector */
-		if (state->internal->dev_ver >= 0x20) {
-			if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x3B) < 0)
-				goto err;
-		}
-
-		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, 0x49) < 0)
-			goto err;
-		zigzag = 0;
-		break;
-
-	case STV090x_SEARCH_DVBS2:
-		if (state->internal->dev_ver >= 0x20) {
-			if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x79) < 0)
-				goto err;
-		}
-
-		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, 0x89) < 0)
-			goto err;
-		zigzag = 1;
-		break;
-
-	case STV090x_SEARCH_AUTO:
-	default:
-		/* accelerate the frequency detector */
-		if (state->internal->dev_ver >= 0x20) {
-			if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x3b) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x79) < 0)
-				goto err;
-		}
-
-		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, 0xc9) < 0)
-			goto err;
-		zigzag = 0;
-		break;
-	}
-
-	trials = 0;
-	do {
-		lock = stv090x_search_car_loop(state, inc, timeout_step, zigzag, steps_max);
-		no_signal = stv090x_chk_signal(state);
-		trials++;
-
-		/*run the SW search 2 times maximum*/
-		if (lock || no_signal || (trials == 2)) {
-			/*Check if the demod is not losing lock in DVBS2*/
-			if (state->internal->dev_ver >= 0x20) {
-				if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x49) < 0)
-					goto err;
-				if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x9e) < 0)
-					goto err;
-			}
-
-			reg = STV090x_READ_DEMOD(state, DMDSTATE);
-			if ((lock) && (STV090x_GETFIELD_Px(reg, HEADER_MODE_FIELD) == STV090x_DVBS2)) {
-				/*Check if the demod is not losing lock in DVBS2*/
-				msleep(timeout_step);
-				reg = STV090x_READ_DEMOD(state, DMDFLYW);
-				dvbs2_fly_wheel = STV090x_GETFIELD_Px(reg, FLYWHEEL_CPT_FIELD);
-				if (dvbs2_fly_wheel < 0xd) {	 /*if correct frames is decrementing */
-					msleep(timeout_step);
-					reg = STV090x_READ_DEMOD(state, DMDFLYW);
-					dvbs2_fly_wheel = STV090x_GETFIELD_Px(reg, FLYWHEEL_CPT_FIELD);
-				}
-				if (dvbs2_fly_wheel < 0xd) {
-					/*FALSE lock, The demod is losing lock */
-					lock = 0;
-					if (trials < 2) {
-						if (state->internal->dev_ver >= 0x20) {
-							if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x79) < 0)
-								goto err;
-						}
-
-						if (STV090x_WRITE_DEMOD(state, DMDCFGMD, 0x89) < 0)
-							goto err;
-					}
-				}
-			}
-		}
-	} while ((!lock) && (trials < 2) && (!no_signal));
-
-	return lock;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static enum stv090x_delsys stv090x_get_std(struct stv090x_state *state)
-{
-	u32 reg;
-	enum stv090x_delsys delsys;
-
-	reg = STV090x_READ_DEMOD(state, DMDSTATE);
-	if (STV090x_GETFIELD_Px(reg, HEADER_MODE_FIELD) == 2)
-		delsys = STV090x_DVBS2;
-	else if (STV090x_GETFIELD_Px(reg, HEADER_MODE_FIELD) == 3) {
-		reg = STV090x_READ_DEMOD(state, FECM);
-		if (STV090x_GETFIELD_Px(reg, DSS_DVB_FIELD) == 1)
-			delsys = STV090x_DSS;
-		else
-			delsys = STV090x_DVBS1;
-	} else {
-		delsys = STV090x_ERROR;
-	}
-
-	return delsys;
-}
-
-/* in Hz */
-static s32 stv090x_get_car_freq(struct stv090x_state *state, u32 mclk)
-{
-	s32 derot, int_1, int_2, tmp_1, tmp_2;
-
-	derot  = STV090x_READ_DEMOD(state, CFR2) << 16;
-	derot |= STV090x_READ_DEMOD(state, CFR1) <<  8;
-	derot |= STV090x_READ_DEMOD(state, CFR0);
-
-	derot = comp2(derot, 24);
-	int_1 = mclk >> 12;
-	int_2 = derot >> 12;
-
-	/* carrier_frequency = MasterClock * Reg / 2^24 */
-	tmp_1 = mclk % 0x1000;
-	tmp_2 = derot % 0x1000;
-
-	derot = (int_1 * int_2) +
-		((int_1 * tmp_2) >> 12) +
-		((int_2 * tmp_1) >> 12);
-
-	return derot;
-}
-
-static int stv090x_get_viterbi(struct stv090x_state *state)
-{
-	u32 reg, rate;
-
-	reg = STV090x_READ_DEMOD(state, VITCURPUN);
-	rate = STV090x_GETFIELD_Px(reg, VIT_CURPUN_FIELD);
-
-	switch (rate) {
-	case 13:
-		state->fec = STV090x_PR12;
-		break;
-
-	case 18:
-		state->fec = STV090x_PR23;
-		break;
-
-	case 21:
-		state->fec = STV090x_PR34;
-		break;
-
-	case 24:
-		state->fec = STV090x_PR56;
-		break;
-
-	case 25:
-		state->fec = STV090x_PR67;
-		break;
-
-	case 26:
-		state->fec = STV090x_PR78;
-		break;
-
-	default:
-		state->fec = STV090x_PRERR;
-		break;
-	}
-
-	return 0;
-}
-
-static enum stv090x_signal_state stv090x_get_sig_params(struct stv090x_state *state)
-{
-	struct dvb_frontend *fe = &state->frontend;
-
-	u8 tmg;
-	u32 reg;
-	s32 i = 0, offst_freq;
-
-	msleep(5);
-
-	if (state->algo == STV090x_BLIND_SEARCH) {
-		tmg = STV090x_READ_DEMOD(state, TMGREG2);
-		STV090x_WRITE_DEMOD(state, SFRSTEP, 0x5c);
-		while ((i <= 50) && (tmg != 0) && (tmg != 0xff)) {
-			tmg = STV090x_READ_DEMOD(state, TMGREG2);
-			msleep(5);
-			i += 5;
-		}
-	}
-	state->delsys = stv090x_get_std(state);
-
-	if (stv090x_i2c_gate_ctrl(state, 1) < 0)
-		goto err;
-
-	if (state->config->tuner_get_frequency) {
-		if (state->config->tuner_get_frequency(fe, &state->frequency) < 0)
-			goto err_gateoff;
-	}
-
-	if (stv090x_i2c_gate_ctrl(state, 0) < 0)
-		goto err;
-
-	offst_freq = stv090x_get_car_freq(state, state->internal->mclk) / 1000;
-	state->frequency += offst_freq;
-
-	if (stv090x_get_viterbi(state) < 0)
-		goto err;
-
-	reg = STV090x_READ_DEMOD(state, DMDMODCOD);
-	state->modcod = STV090x_GETFIELD_Px(reg, DEMOD_MODCOD_FIELD);
-	state->pilots = STV090x_GETFIELD_Px(reg, DEMOD_TYPE_FIELD) & 0x01;
-	state->frame_len = STV090x_GETFIELD_Px(reg, DEMOD_TYPE_FIELD) >> 1;
-	reg = STV090x_READ_DEMOD(state, TMGOBS);
-	state->rolloff = STV090x_GETFIELD_Px(reg, ROLLOFF_STATUS_FIELD);
-	reg = STV090x_READ_DEMOD(state, FECM);
-	state->inversion = STV090x_GETFIELD_Px(reg, IQINV_FIELD);
-
-	if ((state->algo == STV090x_BLIND_SEARCH) || (state->srate < 10000000)) {
-
-		if (stv090x_i2c_gate_ctrl(state, 1) < 0)
-			goto err;
-
-		if (state->config->tuner_get_frequency) {
-			if (state->config->tuner_get_frequency(fe, &state->frequency) < 0)
-				goto err_gateoff;
-		}
-
-		if (stv090x_i2c_gate_ctrl(state, 0) < 0)
-			goto err;
-
-		if (abs(offst_freq) <= ((state->search_range / 2000) + 500))
-			return STV090x_RANGEOK;
-		else if (abs(offst_freq) <= (stv090x_car_width(state->srate, state->rolloff) / 2000))
-			return STV090x_RANGEOK;
-		else
-			return STV090x_OUTOFRANGE; /* Out of Range */
-	} else {
-		if (abs(offst_freq) <= ((state->search_range / 2000) + 500))
-			return STV090x_RANGEOK;
-		else
-			return STV090x_OUTOFRANGE;
-	}
-
-	return STV090x_OUTOFRANGE;
-
-err_gateoff:
-	stv090x_i2c_gate_ctrl(state, 0);
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static u32 stv090x_get_tmgoffst(struct stv090x_state *state, u32 srate)
-{
-	s32 offst_tmg;
-
-	offst_tmg  = STV090x_READ_DEMOD(state, TMGREG2) << 16;
-	offst_tmg |= STV090x_READ_DEMOD(state, TMGREG1) <<  8;
-	offst_tmg |= STV090x_READ_DEMOD(state, TMGREG0);
-
-	offst_tmg = comp2(offst_tmg, 24); /* 2's complement */
-	if (!offst_tmg)
-		offst_tmg = 1;
-
-	offst_tmg  = ((s32) srate * 10) / ((s32) 0x1000000 / offst_tmg);
-	offst_tmg /= 320;
-
-	return offst_tmg;
-}
-
-static u8 stv090x_optimize_carloop(struct stv090x_state *state, enum stv090x_modcod modcod, s32 pilots)
-{
-	u8 aclc = 0x29;
-	s32 i;
-	struct stv090x_long_frame_crloop *car_loop, *car_loop_qpsk_low, *car_loop_apsk_low;
-
-	if (state->internal->dev_ver == 0x20) {
-		car_loop		= stv090x_s2_crl_cut20;
-		car_loop_qpsk_low	= stv090x_s2_lowqpsk_crl_cut20;
-		car_loop_apsk_low	= stv090x_s2_apsk_crl_cut20;
-	} else {
-		/* >= Cut 3 */
-		car_loop		= stv090x_s2_crl_cut30;
-		car_loop_qpsk_low	= stv090x_s2_lowqpsk_crl_cut30;
-		car_loop_apsk_low	= stv090x_s2_apsk_crl_cut30;
-	}
-
-	if (modcod < STV090x_QPSK_12) {
-		i = 0;
-		while ((i < 3) && (modcod != car_loop_qpsk_low[i].modcod))
-			i++;
-
-		if (i >= 3)
-			i = 2;
-
-	} else {
-		i = 0;
-		while ((i < 14) && (modcod != car_loop[i].modcod))
-			i++;
-
-		if (i >= 14) {
-			i = 0;
-			while ((i < 11) && (modcod != car_loop_apsk_low[i].modcod))
-				i++;
-
-			if (i >= 11)
-				i = 10;
-		}
-	}
-
-	if (modcod <= STV090x_QPSK_25) {
-		if (pilots) {
-			if (state->srate <= 3000000)
-				aclc = car_loop_qpsk_low[i].crl_pilots_on_2;
-			else if (state->srate <= 7000000)
-				aclc = car_loop_qpsk_low[i].crl_pilots_on_5;
-			else if (state->srate <= 15000000)
-				aclc = car_loop_qpsk_low[i].crl_pilots_on_10;
-			else if (state->srate <= 25000000)
-				aclc = car_loop_qpsk_low[i].crl_pilots_on_20;
-			else
-				aclc = car_loop_qpsk_low[i].crl_pilots_on_30;
-		} else {
-			if (state->srate <= 3000000)
-				aclc = car_loop_qpsk_low[i].crl_pilots_off_2;
-			else if (state->srate <= 7000000)
-				aclc = car_loop_qpsk_low[i].crl_pilots_off_5;
-			else if (state->srate <= 15000000)
-				aclc = car_loop_qpsk_low[i].crl_pilots_off_10;
-			else if (state->srate <= 25000000)
-				aclc = car_loop_qpsk_low[i].crl_pilots_off_20;
-			else
-				aclc = car_loop_qpsk_low[i].crl_pilots_off_30;
-		}
-
-	} else if (modcod <= STV090x_8PSK_910) {
-		if (pilots) {
-			if (state->srate <= 3000000)
-				aclc = car_loop[i].crl_pilots_on_2;
-			else if (state->srate <= 7000000)
-				aclc = car_loop[i].crl_pilots_on_5;
-			else if (state->srate <= 15000000)
-				aclc = car_loop[i].crl_pilots_on_10;
-			else if (state->srate <= 25000000)
-				aclc = car_loop[i].crl_pilots_on_20;
-			else
-				aclc = car_loop[i].crl_pilots_on_30;
-		} else {
-			if (state->srate <= 3000000)
-				aclc = car_loop[i].crl_pilots_off_2;
-			else if (state->srate <= 7000000)
-				aclc = car_loop[i].crl_pilots_off_5;
-			else if (state->srate <= 15000000)
-				aclc = car_loop[i].crl_pilots_off_10;
-			else if (state->srate <= 25000000)
-				aclc = car_loop[i].crl_pilots_off_20;
-			else
-				aclc = car_loop[i].crl_pilots_off_30;
-		}
-	} else { /* 16APSK and 32APSK */
-		if (state->srate <= 3000000)
-			aclc = car_loop_apsk_low[i].crl_pilots_on_2;
-		else if (state->srate <= 7000000)
-			aclc = car_loop_apsk_low[i].crl_pilots_on_5;
-		else if (state->srate <= 15000000)
-			aclc = car_loop_apsk_low[i].crl_pilots_on_10;
-		else if (state->srate <= 25000000)
-			aclc = car_loop_apsk_low[i].crl_pilots_on_20;
-		else
-			aclc = car_loop_apsk_low[i].crl_pilots_on_30;
-	}
-
-	return aclc;
-}
-
-static u8 stv090x_optimize_carloop_short(struct stv090x_state *state)
-{
-	struct stv090x_short_frame_crloop *short_crl = NULL;
-	s32 index = 0;
-	u8 aclc = 0x0b;
-
-	switch (state->modulation) {
-	case STV090x_QPSK:
-	default:
-		index = 0;
-		break;
-	case STV090x_8PSK:
-		index = 1;
-		break;
-	case STV090x_16APSK:
-		index = 2;
-		break;
-	case STV090x_32APSK:
-		index = 3;
-		break;
-	}
-
-	if (state->internal->dev_ver >= 0x30) {
-		/* Cut 3.0 and up */
-		short_crl = stv090x_s2_short_crl_cut30;
-	} else {
-		/* Cut 2.0 and up: we don't support cuts older than 2.0 */
-		short_crl = stv090x_s2_short_crl_cut20;
-	}
-
-	if (state->srate <= 3000000)
-		aclc = short_crl[index].crl_2;
-	else if (state->srate <= 7000000)
-		aclc = short_crl[index].crl_5;
-	else if (state->srate <= 15000000)
-		aclc = short_crl[index].crl_10;
-	else if (state->srate <= 25000000)
-		aclc = short_crl[index].crl_20;
-	else
-		aclc = short_crl[index].crl_30;
-
-	return aclc;
-}
-
-static int stv090x_optimize_track(struct stv090x_state *state)
-{
-	struct dvb_frontend *fe = &state->frontend;
-
-	enum stv090x_modcod modcod;
-
-	s32 srate, pilots, aclc, f_1, f_0, i = 0, blind_tune = 0;
-	u32 reg;
-
-	srate  = stv090x_get_srate(state, state->internal->mclk);
-	srate += stv090x_get_tmgoffst(state, srate);
-
-	switch (state->delsys) {
-	case STV090x_DVBS1:
-	case STV090x_DSS:
-		if (state->search_mode == STV090x_SEARCH_AUTO) {
-			reg = STV090x_READ_DEMOD(state, DMDCFGMD);
-			STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1);
-			STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 0);
-			if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
-				goto err;
-		}
-		reg = STV090x_READ_DEMOD(state, DEMOD);
-		STV090x_SETFIELD_Px(reg, ROLLOFF_CONTROL_FIELD, state->rolloff);
-		STV090x_SETFIELD_Px(reg, MANUAL_SXROLLOFF_FIELD, 0x01);
-		if (STV090x_WRITE_DEMOD(state, DEMOD, reg) < 0)
-			goto err;
-
-		if (state->internal->dev_ver >= 0x30) {
-			if (stv090x_get_viterbi(state) < 0)
-				goto err;
-
-			if (state->fec == STV090x_PR12) {
-				if (STV090x_WRITE_DEMOD(state, GAUSSR0, 0x98) < 0)
-					goto err;
-				if (STV090x_WRITE_DEMOD(state, CCIR0, 0x18) < 0)
-					goto err;
-			} else {
-				if (STV090x_WRITE_DEMOD(state, GAUSSR0, 0x18) < 0)
-					goto err;
-				if (STV090x_WRITE_DEMOD(state, CCIR0, 0x18) < 0)
-					goto err;
-			}
-		}
-
-		if (STV090x_WRITE_DEMOD(state, ERRCTRL1, 0x75) < 0)
-			goto err;
-		break;
-
-	case STV090x_DVBS2:
-		reg = STV090x_READ_DEMOD(state, DMDCFGMD);
-		STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 0);
-		STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 1);
-		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
-			goto err;
-		if (state->internal->dev_ver >= 0x30) {
-			if (STV090x_WRITE_DEMOD(state, ACLC, 0) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, BCLC, 0) < 0)
-				goto err;
-		}
-		if (state->frame_len == STV090x_LONG_FRAME) {
-			reg = STV090x_READ_DEMOD(state, DMDMODCOD);
-			modcod = STV090x_GETFIELD_Px(reg, DEMOD_MODCOD_FIELD);
-			pilots = STV090x_GETFIELD_Px(reg, DEMOD_TYPE_FIELD) & 0x01;
-			aclc = stv090x_optimize_carloop(state, modcod, pilots);
-			if (modcod <= STV090x_QPSK_910) {
-				STV090x_WRITE_DEMOD(state, ACLC2S2Q, aclc);
-			} else if (modcod <= STV090x_8PSK_910) {
-				if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, 0x2a) < 0)
-					goto err;
-				if (STV090x_WRITE_DEMOD(state, ACLC2S28, aclc) < 0)
-					goto err;
-			}
-			if ((state->demod_mode == STV090x_SINGLE) && (modcod > STV090x_8PSK_910)) {
-				if (modcod <= STV090x_16APSK_910) {
-					if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, 0x2a) < 0)
-						goto err;
-					if (STV090x_WRITE_DEMOD(state, ACLC2S216A, aclc) < 0)
-						goto err;
-				} else {
-					if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, 0x2a) < 0)
-						goto err;
-					if (STV090x_WRITE_DEMOD(state, ACLC2S232A, aclc) < 0)
-						goto err;
-				}
-			}
-		} else {
-			/*Carrier loop setting for short frame*/
-			aclc = stv090x_optimize_carloop_short(state);
-			if (state->modulation == STV090x_QPSK) {
-				if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, aclc) < 0)
-					goto err;
-			} else if (state->modulation == STV090x_8PSK) {
-				if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, 0x2a) < 0)
-					goto err;
-				if (STV090x_WRITE_DEMOD(state, ACLC2S28, aclc) < 0)
-					goto err;
-			} else if (state->modulation == STV090x_16APSK) {
-				if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, 0x2a) < 0)
-					goto err;
-				if (STV090x_WRITE_DEMOD(state, ACLC2S216A, aclc) < 0)
-					goto err;
-			} else if (state->modulation == STV090x_32APSK)  {
-				if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, 0x2a) < 0)
-					goto err;
-				if (STV090x_WRITE_DEMOD(state, ACLC2S232A, aclc) < 0)
-					goto err;
-			}
-		}
-
-		STV090x_WRITE_DEMOD(state, ERRCTRL1, 0x67); /* PER */
-		break;
-
-	case STV090x_ERROR:
-	default:
-		reg = STV090x_READ_DEMOD(state, DMDCFGMD);
-		STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1);
-		STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 1);
-		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
-			goto err;
-		break;
-	}
-
-	f_1 = STV090x_READ_DEMOD(state, CFR2);
-	f_0 = STV090x_READ_DEMOD(state, CFR1);
-	reg = STV090x_READ_DEMOD(state, TMGOBS);
-
-	if (state->algo == STV090x_BLIND_SEARCH) {
-		STV090x_WRITE_DEMOD(state, SFRSTEP, 0x00);
-		reg = STV090x_READ_DEMOD(state, DMDCFGMD);
-		STV090x_SETFIELD_Px(reg, SCAN_ENABLE_FIELD, 0x00);
-		STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 0x00);
-		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, TMGCFG2, 0xc1) < 0)
-			goto err;
-
-		if (stv090x_set_srate(state, srate) < 0)
-			goto err;
-		blind_tune = 1;
-
-		if (stv090x_dvbs_track_crl(state) < 0)
-			goto err;
-	}
-
-	if (state->internal->dev_ver >= 0x20) {
-		if ((state->search_mode == STV090x_SEARCH_DVBS1)	||
-		    (state->search_mode == STV090x_SEARCH_DSS)		||
-		    (state->search_mode == STV090x_SEARCH_AUTO)) {
-
-			if (STV090x_WRITE_DEMOD(state, VAVSRVIT, 0x0a) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, VITSCALE, 0x00) < 0)
-				goto err;
-		}
-	}
-
-	if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x38) < 0)
-		goto err;
-
-	/* AUTO tracking MODE */
-	if (STV090x_WRITE_DEMOD(state, SFRUP1, 0x80) < 0)
-		goto err;
-	/* AUTO tracking MODE */
-	if (STV090x_WRITE_DEMOD(state, SFRLOW1, 0x80) < 0)
-		goto err;
-
-	if ((state->internal->dev_ver >= 0x20) || (blind_tune == 1) ||
-	    (state->srate < 10000000)) {
-		/* update initial carrier freq with the found freq offset */
-		if (STV090x_WRITE_DEMOD(state, CFRINIT1, f_1) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, CFRINIT0, f_0) < 0)
-			goto err;
-		state->tuner_bw = stv090x_car_width(srate, state->rolloff) + 10000000;
-
-		if ((state->internal->dev_ver >= 0x20) || (blind_tune == 1)) {
-
-			if (state->algo != STV090x_WARM_SEARCH) {
-
-				if (stv090x_i2c_gate_ctrl(state, 1) < 0)
-					goto err;
-
-				if (state->config->tuner_set_bandwidth) {
-					if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0)
-						goto err_gateoff;
-				}
-
-				if (stv090x_i2c_gate_ctrl(state, 0) < 0)
-					goto err;
-
-			}
-		}
-		if ((state->algo == STV090x_BLIND_SEARCH) || (state->srate < 10000000))
-			msleep(50); /* blind search: wait 50ms for SR stabilization */
-		else
-			msleep(5);
-
-		stv090x_get_lock_tmg(state);
-
-		if (!(stv090x_get_dmdlock(state, (state->DemodTimeout / 2)))) {
-			if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, CFRINIT1, f_1) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, CFRINIT0, f_0) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x18) < 0)
-				goto err;
-
-			i = 0;
-
-			while ((!(stv090x_get_dmdlock(state, (state->DemodTimeout / 2)))) && (i <= 2)) {
-
-				if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
-					goto err;
-				if (STV090x_WRITE_DEMOD(state, CFRINIT1, f_1) < 0)
-					goto err;
-				if (STV090x_WRITE_DEMOD(state, CFRINIT0, f_0) < 0)
-					goto err;
-				if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x18) < 0)
-					goto err;
-				i++;
-			}
-		}
-
-	}
-
-	if (state->internal->dev_ver >= 0x20) {
-		if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x49) < 0)
-			goto err;
-	}
-
-	if ((state->delsys == STV090x_DVBS1) || (state->delsys == STV090x_DSS))
-		stv090x_set_vit_thtracq(state);
-
-	return 0;
-
-err_gateoff:
-	stv090x_i2c_gate_ctrl(state, 0);
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_get_feclock(struct stv090x_state *state, s32 timeout)
-{
-	s32 timer = 0, lock = 0, stat;
-	u32 reg;
-
-	while ((timer < timeout) && (!lock)) {
-		reg = STV090x_READ_DEMOD(state, DMDSTATE);
-		stat = STV090x_GETFIELD_Px(reg, HEADER_MODE_FIELD);
-
-		switch (stat) {
-		case 0: /* searching */
-		case 1: /* first PLH detected */
-		default:
-			lock = 0;
-			break;
-
-		case 2: /* DVB-S2 mode */
-			reg = STV090x_READ_DEMOD(state, PDELSTATUS1);
-			lock = STV090x_GETFIELD_Px(reg, PKTDELIN_LOCK_FIELD);
-			break;
-
-		case 3: /* DVB-S1/legacy mode */
-			reg = STV090x_READ_DEMOD(state, VSTATUSVIT);
-			lock = STV090x_GETFIELD_Px(reg, LOCKEDVIT_FIELD);
-			break;
-		}
-		if (!lock) {
-			msleep(10);
-			timer += 10;
-		}
-	}
-	return lock;
-}
-
-static int stv090x_get_lock(struct stv090x_state *state, s32 timeout_dmd, s32 timeout_fec)
-{
-	u32 reg;
-	s32 timer = 0;
-	int lock;
-
-	lock = stv090x_get_dmdlock(state, timeout_dmd);
-	if (lock)
-		lock = stv090x_get_feclock(state, timeout_fec);
-
-	if (lock) {
-		lock = 0;
-
-		while ((timer < timeout_fec) && (!lock)) {
-			reg = STV090x_READ_DEMOD(state, TSSTATUS);
-			lock = STV090x_GETFIELD_Px(reg, TSFIFO_LINEOK_FIELD);
-			msleep(1);
-			timer++;
-		}
-	}
-
-	return lock;
-}
-
-static int stv090x_set_s2rolloff(struct stv090x_state *state)
-{
-	u32 reg;
-
-	if (state->internal->dev_ver <= 0x20) {
-		/* rolloff to auto mode if DVBS2 */
-		reg = STV090x_READ_DEMOD(state, DEMOD);
-		STV090x_SETFIELD_Px(reg, MANUAL_SXROLLOFF_FIELD, 0x00);
-		if (STV090x_WRITE_DEMOD(state, DEMOD, reg) < 0)
-			goto err;
-	} else {
-		/* DVB-S2 rolloff to auto mode if DVBS2 */
-		reg = STV090x_READ_DEMOD(state, DEMOD);
-		STV090x_SETFIELD_Px(reg, MANUAL_S2ROLLOFF_FIELD, 0x00);
-		if (STV090x_WRITE_DEMOD(state, DEMOD, reg) < 0)
-			goto err;
-	}
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-
-static enum stv090x_signal_state stv090x_algo(struct stv090x_state *state)
-{
-	struct dvb_frontend *fe = &state->frontend;
-	enum stv090x_signal_state signal_state = STV090x_NOCARRIER;
-	u32 reg;
-	s32 agc1_power, power_iq = 0, i;
-	int lock = 0, low_sr = 0;
-
-	reg = STV090x_READ_DEMOD(state, TSCFGH);
-	STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 1); /* Stop path 1 stream merger */
-	if (STV090x_WRITE_DEMOD(state, TSCFGH, reg) < 0)
-		goto err;
-
-	if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x5c) < 0) /* Demod stop */
-		goto err;
-
-	if (state->internal->dev_ver >= 0x20) {
-		if (state->srate > 5000000) {
-			if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x9e) < 0)
-				goto err;
-		} else {
-			if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x82) < 0)
-				goto err;
-		}
-	}
-
-	stv090x_get_lock_tmg(state);
-
-	if (state->algo == STV090x_BLIND_SEARCH) {
-		state->tuner_bw = 2 * 36000000; /* wide bw for unknown srate */
-		if (STV090x_WRITE_DEMOD(state, TMGCFG2, 0xc0) < 0) /* wider srate scan */
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, CORRELMANT, 0x70) < 0)
-			goto err;
-		if (stv090x_set_srate(state, 1000000) < 0) /* initial srate = 1Msps */
-			goto err;
-	} else {
-		/* known srate */
-		if (STV090x_WRITE_DEMOD(state, DMDTOM, 0x20) < 0)
-			goto err;
-		if (STV090x_WRITE_DEMOD(state, TMGCFG, 0xd2) < 0)
-			goto err;
-
-		if (state->srate < 2000000) {
-			/* SR < 2MSPS */
-			if (STV090x_WRITE_DEMOD(state, CORRELMANT, 0x63) < 0)
-				goto err;
-		} else {
-			/* SR >= 2Msps */
-			if (STV090x_WRITE_DEMOD(state, CORRELMANT, 0x70) < 0)
-				goto err;
-		}
-
-		if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x38) < 0)
-			goto err;
-
-		if (state->internal->dev_ver >= 0x20) {
-			if (STV090x_WRITE_DEMOD(state, KREFTMG, 0x5a) < 0)
-				goto err;
-			if (state->algo == STV090x_COLD_SEARCH)
-				state->tuner_bw = (15 * (stv090x_car_width(state->srate, state->rolloff) + 10000000)) / 10;
-			else if (state->algo == STV090x_WARM_SEARCH)
-				state->tuner_bw = stv090x_car_width(state->srate, state->rolloff) + 10000000;
-		}
-
-		/* if cold start or warm  (Symbolrate is known)
-		 * use a Narrow symbol rate scan range
-		 */
-		if (STV090x_WRITE_DEMOD(state, TMGCFG2, 0xc1) < 0) /* narrow srate scan */
-			goto err;
-
-		if (stv090x_set_srate(state, state->srate) < 0)
-			goto err;
-
-		if (stv090x_set_max_srate(state, state->internal->mclk,
-					  state->srate) < 0)
-			goto err;
-		if (stv090x_set_min_srate(state, state->internal->mclk,
-					  state->srate) < 0)
-			goto err;
-
-		if (state->srate >= 10000000)
-			low_sr = 0;
-		else
-			low_sr = 1;
-	}
-
-	/* Setup tuner */
-	if (stv090x_i2c_gate_ctrl(state, 1) < 0)
-		goto err;
-
-	if (state->config->tuner_set_bbgain) {
-		reg = state->config->tuner_bbgain;
-		if (reg == 0)
-			reg = 10; /* default: 10dB */
-		if (state->config->tuner_set_bbgain(fe, reg) < 0)
-			goto err_gateoff;
-	}
-
-	if (state->config->tuner_set_frequency) {
-		if (state->config->tuner_set_frequency(fe, state->frequency) < 0)
-			goto err_gateoff;
-	}
-
-	if (state->config->tuner_set_bandwidth) {
-		if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0)
-			goto err_gateoff;
-	}
-
-	if (stv090x_i2c_gate_ctrl(state, 0) < 0)
-		goto err;
-
-	msleep(50);
-
-	if (state->config->tuner_get_status) {
-		if (stv090x_i2c_gate_ctrl(state, 1) < 0)
-			goto err;
-		if (state->config->tuner_get_status(fe, &reg) < 0)
-			goto err_gateoff;
-		if (stv090x_i2c_gate_ctrl(state, 0) < 0)
-			goto err;
-
-		if (reg)
-			dprintk(FE_DEBUG, 1, "Tuner phase locked");
-		else {
-			dprintk(FE_DEBUG, 1, "Tuner unlocked");
-			return STV090x_NOCARRIER;
-		}
-	}
-
-	msleep(10);
-	agc1_power = MAKEWORD16(STV090x_READ_DEMOD(state, AGCIQIN1),
-				STV090x_READ_DEMOD(state, AGCIQIN0));
-
-	if (agc1_power == 0) {
-		/* If AGC1 integrator value is 0
-		 * then read POWERI, POWERQ
-		 */
-		for (i = 0; i < 5; i++) {
-			power_iq += (STV090x_READ_DEMOD(state, POWERI) +
-				     STV090x_READ_DEMOD(state, POWERQ)) >> 1;
-		}
-		power_iq /= 5;
-	}
-
-	if ((agc1_power == 0) && (power_iq < STV090x_IQPOWER_THRESHOLD)) {
-		dprintk(FE_ERROR, 1, "No Signal: POWER_IQ=0x%02x", power_iq);
-		lock = 0;
-		signal_state = STV090x_NOAGC1;
-	} else {
-		reg = STV090x_READ_DEMOD(state, DEMOD);
-		STV090x_SETFIELD_Px(reg, SPECINV_CONTROL_FIELD, state->inversion);
-
-		if (state->internal->dev_ver <= 0x20) {
-			/* rolloff to auto mode if DVBS2 */
-			STV090x_SETFIELD_Px(reg, MANUAL_SXROLLOFF_FIELD, 1);
-		} else {
-			/* DVB-S2 rolloff to auto mode if DVBS2 */
-			STV090x_SETFIELD_Px(reg, MANUAL_S2ROLLOFF_FIELD, 1);
-		}
-		if (STV090x_WRITE_DEMOD(state, DEMOD, reg) < 0)
-			goto err;
-
-		if (stv090x_delivery_search(state) < 0)
-			goto err;
-
-		if (state->algo != STV090x_BLIND_SEARCH) {
-			if (stv090x_start_search(state) < 0)
-				goto err;
-		}
-	}
-
-	if (signal_state == STV090x_NOAGC1)
-		return signal_state;
-
-	if (state->algo == STV090x_BLIND_SEARCH)
-		lock = stv090x_blind_search(state);
-
-	else if (state->algo == STV090x_COLD_SEARCH)
-		lock = stv090x_get_coldlock(state, state->DemodTimeout);
-
-	else if (state->algo == STV090x_WARM_SEARCH)
-		lock = stv090x_get_dmdlock(state, state->DemodTimeout);
-
-	if ((!lock) && (state->algo == STV090x_COLD_SEARCH)) {
-		if (!low_sr) {
-			if (stv090x_chk_tmg(state))
-				lock = stv090x_sw_algo(state);
-		}
-	}
-
-	if (lock)
-		signal_state = stv090x_get_sig_params(state);
-
-	if ((lock) && (signal_state == STV090x_RANGEOK)) { /* signal within Range */
-		stv090x_optimize_track(state);
-
-		if (state->internal->dev_ver >= 0x20) {
-			/* >= Cut 2.0 :release TS reset after
-			 * demod lock and optimized Tracking
-			 */
-			reg = STV090x_READ_DEMOD(state, TSCFGH);
-			STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0); /* release merger reset */
-			if (STV090x_WRITE_DEMOD(state, TSCFGH, reg) < 0)
-				goto err;
-
-			msleep(3);
-
-			STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 1); /* merger reset */
-			if (STV090x_WRITE_DEMOD(state, TSCFGH, reg) < 0)
-				goto err;
-
-			STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0); /* release merger reset */
-			if (STV090x_WRITE_DEMOD(state, TSCFGH, reg) < 0)
-				goto err;
-		}
-
-		lock = stv090x_get_lock(state, state->FecTimeout,
-				state->FecTimeout);
-		if (lock) {
-			if (state->delsys == STV090x_DVBS2) {
-				stv090x_set_s2rolloff(state);
-
-				reg = STV090x_READ_DEMOD(state, PDELCTRL2);
-				STV090x_SETFIELD_Px(reg, RESET_UPKO_COUNT, 1);
-				if (STV090x_WRITE_DEMOD(state, PDELCTRL2, reg) < 0)
-					goto err;
-				/* Reset DVBS2 packet delinator error counter */
-				reg = STV090x_READ_DEMOD(state, PDELCTRL2);
-				STV090x_SETFIELD_Px(reg, RESET_UPKO_COUNT, 0);
-				if (STV090x_WRITE_DEMOD(state, PDELCTRL2, reg) < 0)
-					goto err;
-
-				if (STV090x_WRITE_DEMOD(state, ERRCTRL1, 0x67) < 0) /* PER */
-					goto err;
-			} else {
-				if (STV090x_WRITE_DEMOD(state, ERRCTRL1, 0x75) < 0)
-					goto err;
-			}
-			/* Reset the Total packet counter */
-			if (STV090x_WRITE_DEMOD(state, FBERCPT4, 0x00) < 0)
-				goto err;
-			/* Reset the packet Error counter2 */
-			if (STV090x_WRITE_DEMOD(state, ERRCTRL2, 0xc1) < 0)
-				goto err;
-		} else {
-			signal_state = STV090x_NODATA;
-			stv090x_chk_signal(state);
-		}
-	}
-	return signal_state;
-
-err_gateoff:
-	stv090x_i2c_gate_ctrl(state, 0);
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static enum dvbfe_search stv090x_search(struct dvb_frontend *fe)
-{
-	struct stv090x_state *state = fe->demodulator_priv;
-	struct dtv_frontend_properties *props = &fe->dtv_property_cache;
-
-	if (props->frequency == 0)
-		return DVBFE_ALGO_SEARCH_INVALID;
-
-	state->delsys = props->delivery_system;
-	state->frequency = props->frequency;
-	state->srate = props->symbol_rate;
-	state->search_mode = STV090x_SEARCH_AUTO;
-	state->algo = STV090x_COLD_SEARCH;
-	state->fec = STV090x_PRERR;
-	if (state->srate > 10000000) {
-		dprintk(FE_DEBUG, 1, "Search range: 10 MHz");
-		state->search_range = 10000000;
-	} else {
-		dprintk(FE_DEBUG, 1, "Search range: 5 MHz");
-		state->search_range = 5000000;
-	}
-
-	if (stv090x_algo(state) == STV090x_RANGEOK) {
-		dprintk(FE_DEBUG, 1, "Search success!");
-		return DVBFE_ALGO_SEARCH_SUCCESS;
-	} else {
-		dprintk(FE_DEBUG, 1, "Search failed!");
-		return DVBFE_ALGO_SEARCH_FAILED;
-	}
-
-	return DVBFE_ALGO_SEARCH_ERROR;
-}
-
-static int stv090x_read_status(struct dvb_frontend *fe, enum fe_status *status)
-{
-	struct stv090x_state *state = fe->demodulator_priv;
-	u32 reg, dstatus;
-	u8 search_state;
-
-	*status = 0;
-
-	dstatus = STV090x_READ_DEMOD(state, DSTATUS);
-	if (STV090x_GETFIELD_Px(dstatus, CAR_LOCK_FIELD))
-		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER;
-
-	reg = STV090x_READ_DEMOD(state, DMDSTATE);
-	search_state = STV090x_GETFIELD_Px(reg, HEADER_MODE_FIELD);
-
-	switch (search_state) {
-	case 0: /* searching */
-	case 1: /* first PLH detected */
-	default:
-		dprintk(FE_DEBUG, 1, "Status: Unlocked (Searching ..)");
-		break;
-
-	case 2: /* DVB-S2 mode */
-		dprintk(FE_DEBUG, 1, "Delivery system: DVB-S2");
-		if (STV090x_GETFIELD_Px(dstatus, LOCK_DEFINITIF_FIELD)) {
-			reg = STV090x_READ_DEMOD(state, PDELSTATUS1);
-			if (STV090x_GETFIELD_Px(reg, PKTDELIN_LOCK_FIELD)) {
-				*status |= FE_HAS_VITERBI;
-				reg = STV090x_READ_DEMOD(state, TSSTATUS);
-				if (STV090x_GETFIELD_Px(reg, TSFIFO_LINEOK_FIELD))
-					*status |= FE_HAS_SYNC | FE_HAS_LOCK;
-			}
-		}
-		break;
-
-	case 3: /* DVB-S1/legacy mode */
-		dprintk(FE_DEBUG, 1, "Delivery system: DVB-S");
-		if (STV090x_GETFIELD_Px(dstatus, LOCK_DEFINITIF_FIELD)) {
-			reg = STV090x_READ_DEMOD(state, VSTATUSVIT);
-			if (STV090x_GETFIELD_Px(reg, LOCKEDVIT_FIELD)) {
-				*status |= FE_HAS_VITERBI;
-				reg = STV090x_READ_DEMOD(state, TSSTATUS);
-				if (STV090x_GETFIELD_Px(reg, TSFIFO_LINEOK_FIELD))
-					*status |= FE_HAS_SYNC | FE_HAS_LOCK;
-			}
-		}
-		break;
-	}
-
-	return 0;
-}
-
-static int stv090x_read_per(struct dvb_frontend *fe, u32 *per)
-{
-	struct stv090x_state *state = fe->demodulator_priv;
-
-	s32 count_4, count_3, count_2, count_1, count_0, count;
-	u32 reg, h, m, l;
-	enum fe_status status;
-
-	stv090x_read_status(fe, &status);
-	if (!(status & FE_HAS_LOCK)) {
-		*per = 1 << 23; /* Max PER */
-	} else {
-		/* Counter 2 */
-		reg = STV090x_READ_DEMOD(state, ERRCNT22);
-		h = STV090x_GETFIELD_Px(reg, ERR_CNT2_FIELD);
-
-		reg = STV090x_READ_DEMOD(state, ERRCNT21);
-		m = STV090x_GETFIELD_Px(reg, ERR_CNT21_FIELD);
-
-		reg = STV090x_READ_DEMOD(state, ERRCNT20);
-		l = STV090x_GETFIELD_Px(reg, ERR_CNT20_FIELD);
-
-		*per = ((h << 16) | (m << 8) | l);
-
-		count_4 = STV090x_READ_DEMOD(state, FBERCPT4);
-		count_3 = STV090x_READ_DEMOD(state, FBERCPT3);
-		count_2 = STV090x_READ_DEMOD(state, FBERCPT2);
-		count_1 = STV090x_READ_DEMOD(state, FBERCPT1);
-		count_0 = STV090x_READ_DEMOD(state, FBERCPT0);
-
-		if ((!count_4) && (!count_3)) {
-			count  = (count_2 & 0xff) << 16;
-			count |= (count_1 & 0xff) <<  8;
-			count |=  count_0 & 0xff;
-		} else {
-			count = 1 << 24;
-		}
-		if (count == 0)
-			*per = 1;
-	}
-	if (STV090x_WRITE_DEMOD(state, FBERCPT4, 0) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, ERRCTRL2, 0xc1) < 0)
-		goto err;
-
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_table_lookup(const struct stv090x_tab *tab, int max, int val)
-{
-	int res = 0;
-	int min = 0, med;
-
-	if ((val >= tab[min].read && val < tab[max].read) ||
-	    (val >= tab[max].read && val < tab[min].read)) {
-		while ((max - min) > 1) {
-			med = (max + min) / 2;
-			if ((val >= tab[min].read && val < tab[med].read) ||
-			    (val >= tab[med].read && val < tab[min].read))
-				max = med;
-			else
-				min = med;
-		}
-		res = ((val - tab[min].read) *
-		       (tab[max].real - tab[min].real) /
-		       (tab[max].read - tab[min].read)) +
-			tab[min].real;
-	} else {
-		if (tab[min].read < tab[max].read) {
-			if (val < tab[min].read)
-				res = tab[min].real;
-			else if (val >= tab[max].read)
-				res = tab[max].real;
-		} else {
-			if (val >= tab[min].read)
-				res = tab[min].real;
-			else if (val < tab[max].read)
-				res = tab[max].real;
-		}
-	}
-
-	return res;
-}
-
-static int stv090x_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	struct stv090x_state *state = fe->demodulator_priv;
-	u32 reg;
-	s32 agc_0, agc_1, agc;
-	s32 str;
-
-	reg = STV090x_READ_DEMOD(state, AGCIQIN1);
-	agc_1 = STV090x_GETFIELD_Px(reg, AGCIQ_VALUE_FIELD);
-	reg = STV090x_READ_DEMOD(state, AGCIQIN0);
-	agc_0 = STV090x_GETFIELD_Px(reg, AGCIQ_VALUE_FIELD);
-	agc = MAKEWORD16(agc_1, agc_0);
-
-	str = stv090x_table_lookup(stv090x_rf_tab,
-		ARRAY_SIZE(stv090x_rf_tab) - 1, agc);
-	if (agc > stv090x_rf_tab[0].read)
-		str = 0;
-	else if (agc < stv090x_rf_tab[ARRAY_SIZE(stv090x_rf_tab) - 1].read)
-		str = -100;
-	*strength = (str + 100) * 0xFFFF / 100;
-
-	return 0;
-}
-
-static int stv090x_read_cnr(struct dvb_frontend *fe, u16 *cnr)
-{
-	struct stv090x_state *state = fe->demodulator_priv;
-	u32 reg_0, reg_1, reg, i;
-	s32 val_0, val_1, val = 0;
-	u8 lock_f;
-	s32 div;
-	u32 last;
-
-	switch (state->delsys) {
-	case STV090x_DVBS2:
-		reg = STV090x_READ_DEMOD(state, DSTATUS);
-		lock_f = STV090x_GETFIELD_Px(reg, LOCK_DEFINITIF_FIELD);
-		if (lock_f) {
-			msleep(5);
-			for (i = 0; i < 16; i++) {
-				reg_1 = STV090x_READ_DEMOD(state, NNOSPLHT1);
-				val_1 = STV090x_GETFIELD_Px(reg_1, NOSPLHT_NORMED_FIELD);
-				reg_0 = STV090x_READ_DEMOD(state, NNOSPLHT0);
-				val_0 = STV090x_GETFIELD_Px(reg_0, NOSPLHT_NORMED_FIELD);
-				val  += MAKEWORD16(val_1, val_0);
-				msleep(1);
-			}
-			val /= 16;
-			last = ARRAY_SIZE(stv090x_s2cn_tab) - 1;
-			div = stv090x_s2cn_tab[0].read -
-			      stv090x_s2cn_tab[last].read;
-			*cnr = 0xFFFF - ((val * 0xFFFF) / div);
-		}
-		break;
-
-	case STV090x_DVBS1:
-	case STV090x_DSS:
-		reg = STV090x_READ_DEMOD(state, DSTATUS);
-		lock_f = STV090x_GETFIELD_Px(reg, LOCK_DEFINITIF_FIELD);
-		if (lock_f) {
-			msleep(5);
-			for (i = 0; i < 16; i++) {
-				reg_1 = STV090x_READ_DEMOD(state, NOSDATAT1);
-				val_1 = STV090x_GETFIELD_Px(reg_1, NOSDATAT_UNNORMED_FIELD);
-				reg_0 = STV090x_READ_DEMOD(state, NOSDATAT0);
-				val_0 = STV090x_GETFIELD_Px(reg_0, NOSDATAT_UNNORMED_FIELD);
-				val  += MAKEWORD16(val_1, val_0);
-				msleep(1);
-			}
-			val /= 16;
-			last = ARRAY_SIZE(stv090x_s1cn_tab) - 1;
-			div = stv090x_s1cn_tab[0].read -
-			      stv090x_s1cn_tab[last].read;
-			*cnr = 0xFFFF - ((val * 0xFFFF) / div);
-		}
-		break;
-	default:
-		break;
-	}
-
-	return 0;
-}
-
-static int stv090x_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
-{
-	struct stv090x_state *state = fe->demodulator_priv;
-	u32 reg;
-
-	reg = STV090x_READ_DEMOD(state, DISTXCTL);
-	switch (tone) {
-	case SEC_TONE_ON:
-		STV090x_SETFIELD_Px(reg, DISTX_MODE_FIELD, 0);
-		STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 1);
-		if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
-			goto err;
-		STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 0);
-		if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
-			goto err;
-		break;
-
-	case SEC_TONE_OFF:
-		STV090x_SETFIELD_Px(reg, DISTX_MODE_FIELD, 0);
-		STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 1);
-		if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
-			goto err;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-
-static enum dvbfe_algo stv090x_frontend_algo(struct dvb_frontend *fe)
-{
-	return DVBFE_ALGO_CUSTOM;
-}
-
-static int stv090x_send_diseqc_msg(struct dvb_frontend *fe, struct dvb_diseqc_master_cmd *cmd)
-{
-	struct stv090x_state *state = fe->demodulator_priv;
-	u32 reg, idle = 0, fifo_full = 1;
-	int i;
-
-	reg = STV090x_READ_DEMOD(state, DISTXCTL);
-
-	STV090x_SETFIELD_Px(reg, DISTX_MODE_FIELD,
-		(state->config->diseqc_envelope_mode) ? 4 : 2);
-	STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 1);
-	if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
-		goto err;
-	STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 0);
-	if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
-		goto err;
-
-	STV090x_SETFIELD_Px(reg, DIS_PRECHARGE_FIELD, 1);
-	if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
-		goto err;
-
-	for (i = 0; i < cmd->msg_len; i++) {
-
-		while (fifo_full) {
-			reg = STV090x_READ_DEMOD(state, DISTXSTATUS);
-			fifo_full = STV090x_GETFIELD_Px(reg, FIFO_FULL_FIELD);
-		}
-
-		if (STV090x_WRITE_DEMOD(state, DISTXDATA, cmd->msg[i]) < 0)
-			goto err;
-	}
-	reg = STV090x_READ_DEMOD(state, DISTXCTL);
-	STV090x_SETFIELD_Px(reg, DIS_PRECHARGE_FIELD, 0);
-	if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
-		goto err;
-
-	i = 0;
-
-	while ((!idle) && (i < 10)) {
-		reg = STV090x_READ_DEMOD(state, DISTXSTATUS);
-		idle = STV090x_GETFIELD_Px(reg, TX_IDLE_FIELD);
-		msleep(10);
-		i++;
-	}
-
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_send_diseqc_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t burst)
-{
-	struct stv090x_state *state = fe->demodulator_priv;
-	u32 reg, idle = 0, fifo_full = 1;
-	u8 mode, value;
-	int i;
-
-	reg = STV090x_READ_DEMOD(state, DISTXCTL);
-
-	if (burst == SEC_MINI_A) {
-		mode = (state->config->diseqc_envelope_mode) ? 5 : 3;
-		value = 0x00;
-	} else {
-		mode = (state->config->diseqc_envelope_mode) ? 4 : 2;
-		value = 0xFF;
-	}
-
-	STV090x_SETFIELD_Px(reg, DISTX_MODE_FIELD, mode);
-	STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 1);
-	if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
-		goto err;
-	STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 0);
-	if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
-		goto err;
-
-	STV090x_SETFIELD_Px(reg, DIS_PRECHARGE_FIELD, 1);
-	if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
-		goto err;
-
-	while (fifo_full) {
-		reg = STV090x_READ_DEMOD(state, DISTXSTATUS);
-		fifo_full = STV090x_GETFIELD_Px(reg, FIFO_FULL_FIELD);
-	}
-
-	if (STV090x_WRITE_DEMOD(state, DISTXDATA, value) < 0)
-		goto err;
-
-	reg = STV090x_READ_DEMOD(state, DISTXCTL);
-	STV090x_SETFIELD_Px(reg, DIS_PRECHARGE_FIELD, 0);
-	if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
-		goto err;
-
-	i = 0;
-
-	while ((!idle) && (i < 10)) {
-		reg = STV090x_READ_DEMOD(state, DISTXSTATUS);
-		idle = STV090x_GETFIELD_Px(reg, TX_IDLE_FIELD);
-		msleep(10);
-		i++;
-	}
-
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_recv_slave_reply(struct dvb_frontend *fe, struct dvb_diseqc_slave_reply *reply)
-{
-	struct stv090x_state *state = fe->demodulator_priv;
-	u32 reg = 0, i = 0, rx_end = 0;
-
-	while ((rx_end != 1) && (i < 10)) {
-		msleep(10);
-		i++;
-		reg = STV090x_READ_DEMOD(state, DISRX_ST0);
-		rx_end = STV090x_GETFIELD_Px(reg, RX_END_FIELD);
-	}
-
-	if (rx_end) {
-		reply->msg_len = STV090x_GETFIELD_Px(reg, FIFO_BYTENBR_FIELD);
-		for (i = 0; i < reply->msg_len; i++)
-			reply->msg[i] = STV090x_READ_DEMOD(state, DISRXDATA);
-	}
-
-	return 0;
-}
-
-static int stv090x_sleep(struct dvb_frontend *fe)
-{
-	struct stv090x_state *state = fe->demodulator_priv;
-	u32 reg;
-	u8 full_standby = 0;
-
-	if (stv090x_i2c_gate_ctrl(state, 1) < 0)
-		goto err;
-
-	if (state->config->tuner_sleep) {
-		if (state->config->tuner_sleep(fe) < 0)
-			goto err_gateoff;
-	}
-
-	if (stv090x_i2c_gate_ctrl(state, 0) < 0)
-		goto err;
-
-	dprintk(FE_DEBUG, 1, "Set %s(%d) to sleep",
-		state->device == STV0900 ? "STV0900" : "STV0903",
-		state->demod);
-
-	mutex_lock(&state->internal->demod_lock);
-
-	switch (state->demod) {
-	case STV090x_DEMODULATOR_0:
-		/* power off ADC 1 */
-		reg = stv090x_read_reg(state, STV090x_TSTTNR1);
-		STV090x_SETFIELD(reg, ADC1_PON_FIELD, 0);
-		if (stv090x_write_reg(state, STV090x_TSTTNR1, reg) < 0)
-			goto err;
-		/* power off DiSEqC 1 */
-		reg = stv090x_read_reg(state, STV090x_TSTTNR2);
-		STV090x_SETFIELD(reg, DISEQC1_PON_FIELD, 0);
-		if (stv090x_write_reg(state, STV090x_TSTTNR2, reg) < 0)
-			goto err;
-
-		/* check whether path 2 is already sleeping, that is when
-		   ADC2 is off */
-		reg = stv090x_read_reg(state, STV090x_TSTTNR3);
-		if (STV090x_GETFIELD(reg, ADC2_PON_FIELD) == 0)
-			full_standby = 1;
-
-		/* stop clocks */
-		reg = stv090x_read_reg(state, STV090x_STOPCLK1);
-		/* packet delineator 1 clock */
-		STV090x_SETFIELD(reg, STOP_CLKPKDT1_FIELD, 1);
-		/* ADC 1 clock */
-		STV090x_SETFIELD(reg, STOP_CLKADCI1_FIELD, 1);
-		/* FEC clock is shared between the two paths, only stop it
-		   when full standby is possible */
-		if (full_standby)
-			STV090x_SETFIELD(reg, STOP_CLKFEC_FIELD, 1);
-		if (stv090x_write_reg(state, STV090x_STOPCLK1, reg) < 0)
-			goto err;
-		reg = stv090x_read_reg(state, STV090x_STOPCLK2);
-		/* sampling 1 clock */
-		STV090x_SETFIELD(reg, STOP_CLKSAMP1_FIELD, 1);
-		/* viterbi 1 clock */
-		STV090x_SETFIELD(reg, STOP_CLKVIT1_FIELD, 1);
-		/* TS clock is shared between the two paths, only stop it
-		   when full standby is possible */
-		if (full_standby)
-			STV090x_SETFIELD(reg, STOP_CLKTS_FIELD, 1);
-		if (stv090x_write_reg(state, STV090x_STOPCLK2, reg) < 0)
-			goto err;
-		break;
-
-	case STV090x_DEMODULATOR_1:
-		/* power off ADC 2 */
-		reg = stv090x_read_reg(state, STV090x_TSTTNR3);
-		STV090x_SETFIELD(reg, ADC2_PON_FIELD, 0);
-		if (stv090x_write_reg(state, STV090x_TSTTNR3, reg) < 0)
-			goto err;
-		/* power off DiSEqC 2 */
-		reg = stv090x_read_reg(state, STV090x_TSTTNR4);
-		STV090x_SETFIELD(reg, DISEQC2_PON_FIELD, 0);
-		if (stv090x_write_reg(state, STV090x_TSTTNR4, reg) < 0)
-			goto err;
-
-		/* check whether path 1 is already sleeping, that is when
-		   ADC1 is off */
-		reg = stv090x_read_reg(state, STV090x_TSTTNR1);
-		if (STV090x_GETFIELD(reg, ADC1_PON_FIELD) == 0)
-			full_standby = 1;
-
-		/* stop clocks */
-		reg = stv090x_read_reg(state, STV090x_STOPCLK1);
-		/* packet delineator 2 clock */
-		STV090x_SETFIELD(reg, STOP_CLKPKDT2_FIELD, 1);
-		/* ADC 2 clock */
-		STV090x_SETFIELD(reg, STOP_CLKADCI2_FIELD, 1);
-		/* FEC clock is shared between the two paths, only stop it
-		   when full standby is possible */
-		if (full_standby)
-			STV090x_SETFIELD(reg, STOP_CLKFEC_FIELD, 1);
-		if (stv090x_write_reg(state, STV090x_STOPCLK1, reg) < 0)
-			goto err;
-		reg = stv090x_read_reg(state, STV090x_STOPCLK2);
-		/* sampling 2 clock */
-		STV090x_SETFIELD(reg, STOP_CLKSAMP2_FIELD, 1);
-		/* viterbi 2 clock */
-		STV090x_SETFIELD(reg, STOP_CLKVIT2_FIELD, 1);
-		/* TS clock is shared between the two paths, only stop it
-		   when full standby is possible */
-		if (full_standby)
-			STV090x_SETFIELD(reg, STOP_CLKTS_FIELD, 1);
-		if (stv090x_write_reg(state, STV090x_STOPCLK2, reg) < 0)
-			goto err;
-		break;
-
-	default:
-		dprintk(FE_ERROR, 1, "Wrong demodulator!");
-		break;
-	}
-
-	if (full_standby) {
-		/* general power off */
-		reg = stv090x_read_reg(state, STV090x_SYNTCTRL);
-		STV090x_SETFIELD(reg, STANDBY_FIELD, 0x01);
-		if (stv090x_write_reg(state, STV090x_SYNTCTRL, reg) < 0)
-			goto err;
-	}
-
-	mutex_unlock(&state->internal->demod_lock);
-	return 0;
-
-err_gateoff:
-	stv090x_i2c_gate_ctrl(state, 0);
-err:
-	mutex_unlock(&state->internal->demod_lock);
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_wakeup(struct dvb_frontend *fe)
-{
-	struct stv090x_state *state = fe->demodulator_priv;
-	u32 reg;
-
-	dprintk(FE_DEBUG, 1, "Wake %s(%d) from standby",
-		state->device == STV0900 ? "STV0900" : "STV0903",
-		state->demod);
-
-	mutex_lock(&state->internal->demod_lock);
-
-	/* general power on */
-	reg = stv090x_read_reg(state, STV090x_SYNTCTRL);
-	STV090x_SETFIELD(reg, STANDBY_FIELD, 0x00);
-	if (stv090x_write_reg(state, STV090x_SYNTCTRL, reg) < 0)
-		goto err;
-
-	switch (state->demod) {
-	case STV090x_DEMODULATOR_0:
-		/* power on ADC 1 */
-		reg = stv090x_read_reg(state, STV090x_TSTTNR1);
-		STV090x_SETFIELD(reg, ADC1_PON_FIELD, 1);
-		if (stv090x_write_reg(state, STV090x_TSTTNR1, reg) < 0)
-			goto err;
-		/* power on DiSEqC 1 */
-		reg = stv090x_read_reg(state, STV090x_TSTTNR2);
-		STV090x_SETFIELD(reg, DISEQC1_PON_FIELD, 1);
-		if (stv090x_write_reg(state, STV090x_TSTTNR2, reg) < 0)
-			goto err;
-
-		/* activate clocks */
-		reg = stv090x_read_reg(state, STV090x_STOPCLK1);
-		/* packet delineator 1 clock */
-		STV090x_SETFIELD(reg, STOP_CLKPKDT1_FIELD, 0);
-		/* ADC 1 clock */
-		STV090x_SETFIELD(reg, STOP_CLKADCI1_FIELD, 0);
-		/* FEC clock */
-		STV090x_SETFIELD(reg, STOP_CLKFEC_FIELD, 0);
-		if (stv090x_write_reg(state, STV090x_STOPCLK1, reg) < 0)
-			goto err;
-		reg = stv090x_read_reg(state, STV090x_STOPCLK2);
-		/* sampling 1 clock */
-		STV090x_SETFIELD(reg, STOP_CLKSAMP1_FIELD, 0);
-		/* viterbi 1 clock */
-		STV090x_SETFIELD(reg, STOP_CLKVIT1_FIELD, 0);
-		/* TS clock */
-		STV090x_SETFIELD(reg, STOP_CLKTS_FIELD, 0);
-		if (stv090x_write_reg(state, STV090x_STOPCLK2, reg) < 0)
-			goto err;
-		break;
-
-	case STV090x_DEMODULATOR_1:
-		/* power on ADC 2 */
-		reg = stv090x_read_reg(state, STV090x_TSTTNR3);
-		STV090x_SETFIELD(reg, ADC2_PON_FIELD, 1);
-		if (stv090x_write_reg(state, STV090x_TSTTNR3, reg) < 0)
-			goto err;
-		/* power on DiSEqC 2 */
-		reg = stv090x_read_reg(state, STV090x_TSTTNR4);
-		STV090x_SETFIELD(reg, DISEQC2_PON_FIELD, 1);
-		if (stv090x_write_reg(state, STV090x_TSTTNR4, reg) < 0)
-			goto err;
-
-		/* activate clocks */
-		reg = stv090x_read_reg(state, STV090x_STOPCLK1);
-		/* packet delineator 2 clock */
-		STV090x_SETFIELD(reg, STOP_CLKPKDT2_FIELD, 0);
-		/* ADC 2 clock */
-		STV090x_SETFIELD(reg, STOP_CLKADCI2_FIELD, 0);
-		/* FEC clock */
-		STV090x_SETFIELD(reg, STOP_CLKFEC_FIELD, 0);
-		if (stv090x_write_reg(state, STV090x_STOPCLK1, reg) < 0)
-			goto err;
-		reg = stv090x_read_reg(state, STV090x_STOPCLK2);
-		/* sampling 2 clock */
-		STV090x_SETFIELD(reg, STOP_CLKSAMP2_FIELD, 0);
-		/* viterbi 2 clock */
-		STV090x_SETFIELD(reg, STOP_CLKVIT2_FIELD, 0);
-		/* TS clock */
-		STV090x_SETFIELD(reg, STOP_CLKTS_FIELD, 0);
-		if (stv090x_write_reg(state, STV090x_STOPCLK2, reg) < 0)
-			goto err;
-		break;
-
-	default:
-		dprintk(FE_ERROR, 1, "Wrong demodulator!");
-		break;
-	}
-
-	mutex_unlock(&state->internal->demod_lock);
-	return 0;
-err:
-	mutex_unlock(&state->internal->demod_lock);
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static void stv090x_release(struct dvb_frontend *fe)
-{
-	struct stv090x_state *state = fe->demodulator_priv;
-
-	state->internal->num_used--;
-	if (state->internal->num_used <= 0) {
-
-		dprintk(FE_ERROR, 1, "Actually removing");
-
-		remove_dev(state->internal);
-		kfree(state->internal);
-	}
-
-	kfree(state);
-}
-
-static int stv090x_ldpc_mode(struct stv090x_state *state, enum stv090x_mode ldpc_mode)
-{
-	u32 reg = 0;
-
-	reg = stv090x_read_reg(state, STV090x_GENCFG);
-
-	switch (ldpc_mode) {
-	case STV090x_DUAL:
-	default:
-		if ((state->demod_mode != STV090x_DUAL) || (STV090x_GETFIELD(reg, DDEMOD_FIELD) != 1)) {
-			/* set LDPC to dual mode */
-			if (stv090x_write_reg(state, STV090x_GENCFG, 0x1d) < 0)
-				goto err;
-
-			state->demod_mode = STV090x_DUAL;
-
-			reg = stv090x_read_reg(state, STV090x_TSTRES0);
-			STV090x_SETFIELD(reg, FRESFEC_FIELD, 0x1);
-			if (stv090x_write_reg(state, STV090x_TSTRES0, reg) < 0)
-				goto err;
-			STV090x_SETFIELD(reg, FRESFEC_FIELD, 0x0);
-			if (stv090x_write_reg(state, STV090x_TSTRES0, reg) < 0)
-				goto err;
-
-			if (STV090x_WRITE_DEMOD(state, MODCODLST0, 0xff) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, MODCODLST1, 0xff) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, MODCODLST2, 0xff) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, MODCODLST3, 0xff) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, MODCODLST4, 0xff) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, MODCODLST5, 0xff) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, MODCODLST6, 0xff) < 0)
-				goto err;
-
-			if (STV090x_WRITE_DEMOD(state, MODCODLST7, 0xcc) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, MODCODLST8, 0xcc) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, MODCODLST9, 0xcc) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, MODCODLSTA, 0xcc) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, MODCODLSTB, 0xcc) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, MODCODLSTC, 0xcc) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, MODCODLSTD, 0xcc) < 0)
-				goto err;
-
-			if (STV090x_WRITE_DEMOD(state, MODCODLSTE, 0xff) < 0)
-				goto err;
-			if (STV090x_WRITE_DEMOD(state, MODCODLSTF, 0xcf) < 0)
-				goto err;
-		}
-		break;
-
-	case STV090x_SINGLE:
-		if (stv090x_stop_modcod(state) < 0)
-			goto err;
-		if (stv090x_activate_modcod_single(state) < 0)
-			goto err;
-
-		if (state->demod == STV090x_DEMODULATOR_1) {
-			if (stv090x_write_reg(state, STV090x_GENCFG, 0x06) < 0) /* path 2 */
-				goto err;
-		} else {
-			if (stv090x_write_reg(state, STV090x_GENCFG, 0x04) < 0) /* path 1 */
-				goto err;
-		}
-
-		reg = stv090x_read_reg(state, STV090x_TSTRES0);
-		STV090x_SETFIELD(reg, FRESFEC_FIELD, 0x1);
-		if (stv090x_write_reg(state, STV090x_TSTRES0, reg) < 0)
-			goto err;
-		STV090x_SETFIELD(reg, FRESFEC_FIELD, 0x0);
-		if (stv090x_write_reg(state, STV090x_TSTRES0, reg) < 0)
-			goto err;
-
-		reg = STV090x_READ_DEMOD(state, PDELCTRL1);
-		STV090x_SETFIELD_Px(reg, ALGOSWRST_FIELD, 0x01);
-		if (STV090x_WRITE_DEMOD(state, PDELCTRL1, reg) < 0)
-			goto err;
-		STV090x_SETFIELD_Px(reg, ALGOSWRST_FIELD, 0x00);
-		if (STV090x_WRITE_DEMOD(state, PDELCTRL1, reg) < 0)
-			goto err;
-		break;
-	}
-
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-/* return (Hz), clk in Hz*/
-static u32 stv090x_get_mclk(struct stv090x_state *state)
-{
-	const struct stv090x_config *config = state->config;
-	u32 div, reg;
-	u8 ratio;
-
-	div = stv090x_read_reg(state, STV090x_NCOARSE);
-	reg = stv090x_read_reg(state, STV090x_SYNTCTRL);
-	ratio = STV090x_GETFIELD(reg, SELX1RATIO_FIELD) ? 4 : 6;
-
-	return (div + 1) * config->xtal / ratio; /* kHz */
-}
-
-static int stv090x_set_mclk(struct stv090x_state *state, u32 mclk, u32 clk)
-{
-	const struct stv090x_config *config = state->config;
-	u32 reg, div, clk_sel;
-
-	reg = stv090x_read_reg(state, STV090x_SYNTCTRL);
-	clk_sel = ((STV090x_GETFIELD(reg, SELX1RATIO_FIELD) == 1) ? 4 : 6);
-
-	div = ((clk_sel * mclk) / config->xtal) - 1;
-
-	reg = stv090x_read_reg(state, STV090x_NCOARSE);
-	STV090x_SETFIELD(reg, M_DIV_FIELD, div);
-	if (stv090x_write_reg(state, STV090x_NCOARSE, reg) < 0)
-		goto err;
-
-	state->internal->mclk = stv090x_get_mclk(state);
-
-	/*Set the DiseqC frequency to 22KHz */
-	div = state->internal->mclk / 704000;
-	if (STV090x_WRITE_DEMOD(state, F22TX, div) < 0)
-		goto err;
-	if (STV090x_WRITE_DEMOD(state, F22RX, div) < 0)
-		goto err;
-
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_set_tspath(struct stv090x_state *state)
-{
-	u32 reg;
-
-	if (state->internal->dev_ver >= 0x20) {
-		switch (state->config->ts1_mode) {
-		case STV090x_TSMODE_PARALLEL_PUNCTURED:
-		case STV090x_TSMODE_DVBCI:
-			switch (state->config->ts2_mode) {
-			case STV090x_TSMODE_SERIAL_PUNCTURED:
-			case STV090x_TSMODE_SERIAL_CONTINUOUS:
-			default:
-				stv090x_write_reg(state, STV090x_TSGENERAL, 0x00);
-				break;
-
-			case STV090x_TSMODE_PARALLEL_PUNCTURED:
-			case STV090x_TSMODE_DVBCI:
-				if (stv090x_write_reg(state, STV090x_TSGENERAL, 0x06) < 0) /* Mux'd stream mode */
-					goto err;
-				reg = stv090x_read_reg(state, STV090x_P1_TSCFGM);
-				STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 3);
-				if (stv090x_write_reg(state, STV090x_P1_TSCFGM, reg) < 0)
-					goto err;
-				reg = stv090x_read_reg(state, STV090x_P2_TSCFGM);
-				STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 3);
-				if (stv090x_write_reg(state, STV090x_P2_TSCFGM, reg) < 0)
-					goto err;
-				if (stv090x_write_reg(state, STV090x_P1_TSSPEED, 0x14) < 0)
-					goto err;
-				if (stv090x_write_reg(state, STV090x_P2_TSSPEED, 0x28) < 0)
-					goto err;
-				break;
-			}
-			break;
-
-		case STV090x_TSMODE_SERIAL_PUNCTURED:
-		case STV090x_TSMODE_SERIAL_CONTINUOUS:
-		default:
-			switch (state->config->ts2_mode) {
-			case STV090x_TSMODE_SERIAL_PUNCTURED:
-			case STV090x_TSMODE_SERIAL_CONTINUOUS:
-			default:
-				if (stv090x_write_reg(state, STV090x_TSGENERAL, 0x0c) < 0)
-					goto err;
-				break;
-
-			case STV090x_TSMODE_PARALLEL_PUNCTURED:
-			case STV090x_TSMODE_DVBCI:
-				if (stv090x_write_reg(state, STV090x_TSGENERAL, 0x0a) < 0)
-					goto err;
-				break;
-			}
-			break;
-		}
-	} else {
-		switch (state->config->ts1_mode) {
-		case STV090x_TSMODE_PARALLEL_PUNCTURED:
-		case STV090x_TSMODE_DVBCI:
-			switch (state->config->ts2_mode) {
-			case STV090x_TSMODE_SERIAL_PUNCTURED:
-			case STV090x_TSMODE_SERIAL_CONTINUOUS:
-			default:
-				stv090x_write_reg(state, STV090x_TSGENERAL1X, 0x10);
-				break;
-
-			case STV090x_TSMODE_PARALLEL_PUNCTURED:
-			case STV090x_TSMODE_DVBCI:
-				stv090x_write_reg(state, STV090x_TSGENERAL1X, 0x16);
-				reg = stv090x_read_reg(state, STV090x_P1_TSCFGM);
-				STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 3);
-				if (stv090x_write_reg(state, STV090x_P1_TSCFGM, reg) < 0)
-					goto err;
-				reg = stv090x_read_reg(state, STV090x_P1_TSCFGM);
-				STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 0);
-				if (stv090x_write_reg(state, STV090x_P1_TSCFGM, reg) < 0)
-					goto err;
-				if (stv090x_write_reg(state, STV090x_P1_TSSPEED, 0x14) < 0)
-					goto err;
-				if (stv090x_write_reg(state, STV090x_P2_TSSPEED, 0x28) < 0)
-					goto err;
-				break;
-			}
-			break;
-
-		case STV090x_TSMODE_SERIAL_PUNCTURED:
-		case STV090x_TSMODE_SERIAL_CONTINUOUS:
-		default:
-			switch (state->config->ts2_mode) {
-			case STV090x_TSMODE_SERIAL_PUNCTURED:
-			case STV090x_TSMODE_SERIAL_CONTINUOUS:
-			default:
-				stv090x_write_reg(state, STV090x_TSGENERAL1X, 0x14);
-				break;
-
-			case STV090x_TSMODE_PARALLEL_PUNCTURED:
-			case STV090x_TSMODE_DVBCI:
-				stv090x_write_reg(state, STV090x_TSGENERAL1X, 0x12);
-				break;
-			}
-			break;
-		}
-	}
-
-	switch (state->config->ts1_mode) {
-	case STV090x_TSMODE_PARALLEL_PUNCTURED:
-		reg = stv090x_read_reg(state, STV090x_P1_TSCFGH);
-		STV090x_SETFIELD_Px(reg, TSFIFO_TEIUPDATE_FIELD, state->config->ts1_tei);
-		STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x00);
-		STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x00);
-		if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0)
-			goto err;
-		break;
-
-	case STV090x_TSMODE_DVBCI:
-		reg = stv090x_read_reg(state, STV090x_P1_TSCFGH);
-		STV090x_SETFIELD_Px(reg, TSFIFO_TEIUPDATE_FIELD, state->config->ts1_tei);
-		STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x00);
-		STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x01);
-		if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0)
-			goto err;
-		break;
-
-	case STV090x_TSMODE_SERIAL_PUNCTURED:
-		reg = stv090x_read_reg(state, STV090x_P1_TSCFGH);
-		STV090x_SETFIELD_Px(reg, TSFIFO_TEIUPDATE_FIELD, state->config->ts1_tei);
-		STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x01);
-		STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x00);
-		if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0)
-			goto err;
-		break;
-
-	case STV090x_TSMODE_SERIAL_CONTINUOUS:
-		reg = stv090x_read_reg(state, STV090x_P1_TSCFGH);
-		STV090x_SETFIELD_Px(reg, TSFIFO_TEIUPDATE_FIELD, state->config->ts1_tei);
-		STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x01);
-		STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x01);
-		if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0)
-			goto err;
-		break;
-
-	default:
-		break;
-	}
-
-	switch (state->config->ts2_mode) {
-	case STV090x_TSMODE_PARALLEL_PUNCTURED:
-		reg = stv090x_read_reg(state, STV090x_P2_TSCFGH);
-		STV090x_SETFIELD_Px(reg, TSFIFO_TEIUPDATE_FIELD, state->config->ts2_tei);
-		STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x00);
-		STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x00);
-		if (stv090x_write_reg(state, STV090x_P2_TSCFGH, reg) < 0)
-			goto err;
-		break;
-
-	case STV090x_TSMODE_DVBCI:
-		reg = stv090x_read_reg(state, STV090x_P2_TSCFGH);
-		STV090x_SETFIELD_Px(reg, TSFIFO_TEIUPDATE_FIELD, state->config->ts2_tei);
-		STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x00);
-		STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x01);
-		if (stv090x_write_reg(state, STV090x_P2_TSCFGH, reg) < 0)
-			goto err;
-		break;
-
-	case STV090x_TSMODE_SERIAL_PUNCTURED:
-		reg = stv090x_read_reg(state, STV090x_P2_TSCFGH);
-		STV090x_SETFIELD_Px(reg, TSFIFO_TEIUPDATE_FIELD, state->config->ts2_tei);
-		STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x01);
-		STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x00);
-		if (stv090x_write_reg(state, STV090x_P2_TSCFGH, reg) < 0)
-			goto err;
-		break;
-
-	case STV090x_TSMODE_SERIAL_CONTINUOUS:
-		reg = stv090x_read_reg(state, STV090x_P2_TSCFGH);
-		STV090x_SETFIELD_Px(reg, TSFIFO_TEIUPDATE_FIELD, state->config->ts2_tei);
-		STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x01);
-		STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x01);
-		if (stv090x_write_reg(state, STV090x_P2_TSCFGH, reg) < 0)
-			goto err;
-		break;
-
-	default:
-		break;
-	}
-
-	if (state->config->ts1_clk > 0) {
-		u32 speed;
-
-		switch (state->config->ts1_mode) {
-		case STV090x_TSMODE_PARALLEL_PUNCTURED:
-		case STV090x_TSMODE_DVBCI:
-		default:
-			speed = state->internal->mclk /
-				(state->config->ts1_clk / 4);
-			if (speed < 0x08)
-				speed = 0x08;
-			if (speed > 0xFF)
-				speed = 0xFF;
-			break;
-		case STV090x_TSMODE_SERIAL_PUNCTURED:
-		case STV090x_TSMODE_SERIAL_CONTINUOUS:
-			speed = state->internal->mclk /
-				(state->config->ts1_clk / 32);
-			if (speed < 0x20)
-				speed = 0x20;
-			if (speed > 0xFF)
-				speed = 0xFF;
-			break;
-		}
-		reg = stv090x_read_reg(state, STV090x_P1_TSCFGM);
-		STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 3);
-		if (stv090x_write_reg(state, STV090x_P1_TSCFGM, reg) < 0)
-			goto err;
-		if (stv090x_write_reg(state, STV090x_P1_TSSPEED, speed) < 0)
-			goto err;
-	}
-
-	if (state->config->ts2_clk > 0) {
-		u32 speed;
-
-		switch (state->config->ts2_mode) {
-		case STV090x_TSMODE_PARALLEL_PUNCTURED:
-		case STV090x_TSMODE_DVBCI:
-		default:
-			speed = state->internal->mclk /
-				(state->config->ts2_clk / 4);
-			if (speed < 0x08)
-				speed = 0x08;
-			if (speed > 0xFF)
-				speed = 0xFF;
-			break;
-		case STV090x_TSMODE_SERIAL_PUNCTURED:
-		case STV090x_TSMODE_SERIAL_CONTINUOUS:
-			speed = state->internal->mclk /
-				(state->config->ts2_clk / 32);
-			if (speed < 0x20)
-				speed = 0x20;
-			if (speed > 0xFF)
-				speed = 0xFF;
-			break;
-		}
-		reg = stv090x_read_reg(state, STV090x_P2_TSCFGM);
-		STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 3);
-		if (stv090x_write_reg(state, STV090x_P2_TSCFGM, reg) < 0)
-			goto err;
-		if (stv090x_write_reg(state, STV090x_P2_TSSPEED, speed) < 0)
-			goto err;
-	}
-
-	reg = stv090x_read_reg(state, STV090x_P2_TSCFGH);
-	STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0x01);
-	if (stv090x_write_reg(state, STV090x_P2_TSCFGH, reg) < 0)
-		goto err;
-	STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0x00);
-	if (stv090x_write_reg(state, STV090x_P2_TSCFGH, reg) < 0)
-		goto err;
-
-	reg = stv090x_read_reg(state, STV090x_P1_TSCFGH);
-	STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0x01);
-	if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0)
-		goto err;
-	STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0x00);
-	if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0)
-		goto err;
-
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_init(struct dvb_frontend *fe)
-{
-	struct stv090x_state *state = fe->demodulator_priv;
-	const struct stv090x_config *config = state->config;
-	u32 reg;
-
-	if (state->internal->mclk == 0) {
-		/* call tuner init to configure the tuner's clock output
-		   divider directly before setting up the master clock of
-		   the stv090x. */
-		if (stv090x_i2c_gate_ctrl(state, 1) < 0)
-			goto err;
-
-		if (config->tuner_init) {
-			if (config->tuner_init(fe) < 0)
-				goto err_gateoff;
-		}
-
-		if (stv090x_i2c_gate_ctrl(state, 0) < 0)
-			goto err;
-
-		stv090x_set_mclk(state, 135000000, config->xtal); /* 135 Mhz */
-		msleep(5);
-		if (stv090x_write_reg(state, STV090x_SYNTCTRL,
-				      0x20 | config->clk_mode) < 0)
-			goto err;
-		stv090x_get_mclk(state);
-	}
-
-	if (stv090x_wakeup(fe) < 0) {
-		dprintk(FE_ERROR, 1, "Error waking device");
-		goto err;
-	}
-
-	if (stv090x_ldpc_mode(state, state->demod_mode) < 0)
-		goto err;
-
-	reg = STV090x_READ_DEMOD(state, TNRCFG2);
-	STV090x_SETFIELD_Px(reg, TUN_IQSWAP_FIELD, state->inversion);
-	if (STV090x_WRITE_DEMOD(state, TNRCFG2, reg) < 0)
-		goto err;
-	reg = STV090x_READ_DEMOD(state, DEMOD);
-	STV090x_SETFIELD_Px(reg, ROLLOFF_CONTROL_FIELD, state->rolloff);
-	if (STV090x_WRITE_DEMOD(state, DEMOD, reg) < 0)
-		goto err;
-
-	if (stv090x_i2c_gate_ctrl(state, 1) < 0)
-		goto err;
-
-	if (config->tuner_set_mode) {
-		if (config->tuner_set_mode(fe, TUNER_WAKE) < 0)
-			goto err_gateoff;
-	}
-
-	if (config->tuner_init) {
-		if (config->tuner_init(fe) < 0)
-			goto err_gateoff;
-	}
-
-	if (stv090x_i2c_gate_ctrl(state, 0) < 0)
-		goto err;
-
-	if (stv090x_set_tspath(state) < 0)
-		goto err;
-
-	return 0;
-
-err_gateoff:
-	stv090x_i2c_gate_ctrl(state, 0);
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-static int stv090x_setup(struct dvb_frontend *fe)
-{
-	struct stv090x_state *state = fe->demodulator_priv;
-	const struct stv090x_config *config = state->config;
-	const struct stv090x_reg *stv090x_initval = NULL;
-	const struct stv090x_reg *stv090x_cut20_val = NULL;
-	unsigned long t1_size = 0, t2_size = 0;
-	u32 reg = 0;
-
-	int i;
-
-	if (state->device == STV0900) {
-		dprintk(FE_DEBUG, 1, "Initializing STV0900");
-		stv090x_initval = stv0900_initval;
-		t1_size = ARRAY_SIZE(stv0900_initval);
-		stv090x_cut20_val = stv0900_cut20_val;
-		t2_size = ARRAY_SIZE(stv0900_cut20_val);
-	} else if (state->device == STV0903) {
-		dprintk(FE_DEBUG, 1, "Initializing STV0903");
-		stv090x_initval = stv0903_initval;
-		t1_size = ARRAY_SIZE(stv0903_initval);
-		stv090x_cut20_val = stv0903_cut20_val;
-		t2_size = ARRAY_SIZE(stv0903_cut20_val);
-	}
-
-	/* STV090x init */
-
-	/* Stop Demod */
-	if (stv090x_write_reg(state, STV090x_P1_DMDISTATE, 0x5c) < 0)
-		goto err;
-	if (stv090x_write_reg(state, STV090x_P2_DMDISTATE, 0x5c) < 0)
-		goto err;
-
-	msleep(5);
-
-	/* Set No Tuner Mode */
-	if (stv090x_write_reg(state, STV090x_P1_TNRCFG, 0x6c) < 0)
-		goto err;
-	if (stv090x_write_reg(state, STV090x_P2_TNRCFG, 0x6c) < 0)
-		goto err;
-
-	/* I2C repeater OFF */
-	STV090x_SETFIELD_Px(reg, ENARPT_LEVEL_FIELD, config->repeater_level);
-	if (stv090x_write_reg(state, STV090x_P1_I2CRPT, reg) < 0)
-		goto err;
-	if (stv090x_write_reg(state, STV090x_P2_I2CRPT, reg) < 0)
-		goto err;
-
-	if (stv090x_write_reg(state, STV090x_NCOARSE, 0x13) < 0) /* set PLL divider */
-		goto err;
-	msleep(5);
-	if (stv090x_write_reg(state, STV090x_I2CCFG, 0x08) < 0) /* 1/41 oversampling */
-		goto err;
-	if (stv090x_write_reg(state, STV090x_SYNTCTRL, 0x20 | config->clk_mode) < 0) /* enable PLL */
-		goto err;
-	msleep(5);
-
-	/* write initval */
-	dprintk(FE_DEBUG, 1, "Setting up initial values");
-	for (i = 0; i < t1_size; i++) {
-		if (stv090x_write_reg(state, stv090x_initval[i].addr, stv090x_initval[i].data) < 0)
-			goto err;
-	}
-
-	state->internal->dev_ver = stv090x_read_reg(state, STV090x_MID);
-	if (state->internal->dev_ver >= 0x20) {
-		if (stv090x_write_reg(state, STV090x_TSGENERAL, 0x0c) < 0)
-			goto err;
-
-		/* write cut20_val*/
-		dprintk(FE_DEBUG, 1, "Setting up Cut 2.0 initial values");
-		for (i = 0; i < t2_size; i++) {
-			if (stv090x_write_reg(state, stv090x_cut20_val[i].addr, stv090x_cut20_val[i].data) < 0)
-				goto err;
-		}
-
-	} else if (state->internal->dev_ver < 0x20) {
-		dprintk(FE_ERROR, 1, "ERROR: Unsupported Cut: 0x%02x!",
-			state->internal->dev_ver);
-
-		goto err;
-	} else if (state->internal->dev_ver > 0x30) {
-		/* we shouldn't bail out from here */
-		dprintk(FE_ERROR, 1, "INFO: Cut: 0x%02x probably incomplete support!",
-			state->internal->dev_ver);
-	}
-
-	/* ADC1 range */
-	reg = stv090x_read_reg(state, STV090x_TSTTNR1);
-	STV090x_SETFIELD(reg, ADC1_INMODE_FIELD,
-		(config->adc1_range == STV090x_ADC_1Vpp) ? 0 : 1);
-	if (stv090x_write_reg(state, STV090x_TSTTNR1, reg) < 0)
-		goto err;
-
-	/* ADC2 range */
-	reg = stv090x_read_reg(state, STV090x_TSTTNR3);
-	STV090x_SETFIELD(reg, ADC2_INMODE_FIELD,
-		(config->adc2_range == STV090x_ADC_1Vpp) ? 0 : 1);
-	if (stv090x_write_reg(state, STV090x_TSTTNR3, reg) < 0)
-		goto err;
-
-	if (stv090x_write_reg(state, STV090x_TSTRES0, 0x80) < 0)
-		goto err;
-	if (stv090x_write_reg(state, STV090x_TSTRES0, 0x00) < 0)
-		goto err;
-
-	return 0;
-err:
-	dprintk(FE_ERROR, 1, "I/O error");
-	return -1;
-}
-
-int stv090x_set_gpio(struct dvb_frontend *fe, u8 gpio, u8 dir, u8 value,
-		u8 xor_value)
-{
-	struct stv090x_state *state = fe->demodulator_priv;
-	u8 reg = 0;
-
-	STV090x_SETFIELD(reg, GPIOx_OPD_FIELD, dir);
-	STV090x_SETFIELD(reg, GPIOx_CONFIG_FIELD, value);
-	STV090x_SETFIELD(reg, GPIOx_XOR_FIELD, xor_value);
-
-	return stv090x_write_reg(state, STV090x_GPIOxCFG(gpio), reg);
-}
-EXPORT_SYMBOL(stv090x_set_gpio);
-
-static struct dvb_frontend_ops stv090x_ops = {
-	.delsys = { SYS_DVBS, SYS_DVBS2, SYS_DSS },
-	.info = {
-		.name			= "STV090x Multistandard",
-		.frequency_min		= 950000,
-		.frequency_max 		= 2150000,
-		.frequency_stepsize	= 0,
-		.frequency_tolerance	= 0,
-		.symbol_rate_min 	= 1000000,
-		.symbol_rate_max 	= 45000000,
-		.caps			= FE_CAN_INVERSION_AUTO |
-					  FE_CAN_FEC_AUTO       |
-					  FE_CAN_QPSK           |
-					  FE_CAN_2G_MODULATION
-	},
-
-	.release			= stv090x_release,
-	.init				= stv090x_init,
-
-	.sleep				= stv090x_sleep,
-	.get_frontend_algo		= stv090x_frontend_algo,
-
-	.diseqc_send_master_cmd		= stv090x_send_diseqc_msg,
-	.diseqc_send_burst		= stv090x_send_diseqc_burst,
-	.diseqc_recv_slave_reply	= stv090x_recv_slave_reply,
-	.set_tone			= stv090x_set_tone,
-
-	.search				= stv090x_search,
-	.read_status			= stv090x_read_status,
-	.read_ber			= stv090x_read_per,
-	.read_signal_strength		= stv090x_read_signal_strength,
-	.read_snr			= stv090x_read_cnr,
-};
-
-
-struct dvb_frontend *stv090x_attach(const struct stv090x_config *config,
-				    struct i2c_adapter *i2c,
-				    enum stv090x_demodulator demod)
-{
-	struct stv090x_state *state = NULL;
-	struct stv090x_dev *temp_int;
-
-	state = kzalloc(sizeof (struct stv090x_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	state->verbose				= &verbose;
-	state->config				= config;
-	state->i2c				= i2c;
-	state->frontend.ops			= stv090x_ops;
-	state->frontend.demodulator_priv	= state;
-	state->demod				= demod;
-	state->demod_mode 			= config->demod_mode; /* Single or Dual mode */
-	state->device				= config->device;
-	state->rolloff				= STV090x_RO_35; /* default */
-
-	temp_int = find_dev(state->i2c,
-				state->config->address);
-
-	if ((temp_int != NULL) && (state->demod_mode == STV090x_DUAL)) {
-		state->internal = temp_int->internal;
-		state->internal->num_used++;
-		dprintk(FE_INFO, 1, "Found Internal Structure!");
-	} else {
-		state->internal = kmalloc(sizeof(struct stv090x_internal),
-					  GFP_KERNEL);
-		if (!state->internal)
-			goto error;
-		temp_int = append_internal(state->internal);
-		if (!temp_int) {
-			kfree(state->internal);
-			goto error;
-		}
-		state->internal->num_used = 1;
-		state->internal->mclk = 0;
-		state->internal->dev_ver = 0;
-		state->internal->i2c_adap = state->i2c;
-		state->internal->i2c_addr = state->config->address;
-		dprintk(FE_INFO, 1, "Create New Internal Structure!");
-
-		mutex_init(&state->internal->demod_lock);
-		mutex_init(&state->internal->tuner_lock);
-
-		if (stv090x_setup(&state->frontend) < 0) {
-			dprintk(FE_ERROR, 1, "Error setting up device");
-			goto err_remove;
-		}
-	}
-
-	/* workaround for stuck DiSEqC output */
-	if (config->diseqc_envelope_mode)
-		stv090x_send_diseqc_burst(&state->frontend, SEC_MINI_A);
-
-	dprintk(FE_ERROR, 1, "Attaching %s demodulator(%d) Cut=0x%02x",
-	       state->device == STV0900 ? "STV0900" : "STV0903",
-	       demod,
-	       state->internal->dev_ver);
-
-	return &state->frontend;
-
-err_remove:
-	remove_dev(state->internal);
-	kfree(state->internal);
-error:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(stv090x_attach);
-MODULE_PARM_DESC(verbose, "Set Verbosity level");
-MODULE_AUTHOR("Manu Abraham");
-MODULE_DESCRIPTION("STV090x Multi-Std Broadcast frontend");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/stv090x.h b/drivers/media/dvb/frontends/stv090x.h
deleted file mode 100644
index 29cdc2b..0000000
--- a/drivers/media/dvb/frontends/stv090x.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
-	STV0900/0903 Multistandard Broadcast Frontend driver
-	Copyright (C) Manu Abraham <abraham.manu@gmail.com>
-
-	Copyright (C) ST Microelectronics
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __STV090x_H
-#define __STV090x_H
-
-enum stv090x_demodulator {
-	STV090x_DEMODULATOR_0 = 1,
-	STV090x_DEMODULATOR_1
-};
-
-enum stv090x_device {
-	STV0903	=  0,
-	STV0900,
-};
-
-enum stv090x_mode {
-	STV090x_DUAL = 0,
-	STV090x_SINGLE
-};
-
-enum stv090x_tsmode {
-	STV090x_TSMODE_SERIAL_PUNCTURED	= 1,
-	STV090x_TSMODE_SERIAL_CONTINUOUS,
-	STV090x_TSMODE_PARALLEL_PUNCTURED,
-	STV090x_TSMODE_DVBCI
-};
-
-enum stv090x_clkmode {
-	STV090x_CLK_INT = 0, /* Clk i/p = CLKI */
-	STV090x_CLK_EXT = 2 /* Clk i/p = XTALI */
-};
-
-enum stv090x_i2crpt {
-	STV090x_RPTLEVEL_256	= 0,
-	STV090x_RPTLEVEL_128	= 1,
-	STV090x_RPTLEVEL_64	= 2,
-	STV090x_RPTLEVEL_32	= 3,
-	STV090x_RPTLEVEL_16	= 4,
-	STV090x_RPTLEVEL_8	= 5,
-	STV090x_RPTLEVEL_4	= 6,
-	STV090x_RPTLEVEL_2	= 7,
-};
-
-enum stv090x_adc_range {
-	STV090x_ADC_2Vpp	= 0,
-	STV090x_ADC_1Vpp	= 1
-};
-
-struct stv090x_config {
-	enum stv090x_device	device;
-	enum stv090x_mode	demod_mode;
-	enum stv090x_clkmode	clk_mode;
-
-	u32 xtal; /* default: 8000000 */
-	u8 address; /* default: 0x68 */
-
-	u8 ts1_mode;
-	u8 ts2_mode;
-	u32 ts1_clk;
-	u32 ts2_clk;
-
-	u8 ts1_tei : 1;
-	u8 ts2_tei : 1;
-
-	enum stv090x_i2crpt	repeater_level;
-
-	u8			tuner_bbgain; /* default: 10db */
-	enum stv090x_adc_range	adc1_range; /* default: 2Vpp */
-	enum stv090x_adc_range	adc2_range; /* default: 2Vpp */
-
-	bool diseqc_envelope_mode;
-
-	int (*tuner_init) (struct dvb_frontend *fe);
-	int (*tuner_sleep) (struct dvb_frontend *fe);
-	int (*tuner_set_mode) (struct dvb_frontend *fe, enum tuner_mode mode);
-	int (*tuner_set_frequency) (struct dvb_frontend *fe, u32 frequency);
-	int (*tuner_get_frequency) (struct dvb_frontend *fe, u32 *frequency);
-	int (*tuner_set_bandwidth) (struct dvb_frontend *fe, u32 bandwidth);
-	int (*tuner_get_bandwidth) (struct dvb_frontend *fe, u32 *bandwidth);
-	int (*tuner_set_bbgain) (struct dvb_frontend *fe, u32 gain);
-	int (*tuner_get_bbgain) (struct dvb_frontend *fe, u32 *gain);
-	int (*tuner_set_refclk)  (struct dvb_frontend *fe, u32 refclk);
-	int (*tuner_get_status) (struct dvb_frontend *fe, u32 *status);
-	void (*tuner_i2c_lock) (struct dvb_frontend *fe, int lock);
-};
-
-#if defined(CONFIG_DVB_STV090x) || (defined(CONFIG_DVB_STV090x_MODULE) && defined(MODULE))
-
-extern struct dvb_frontend *stv090x_attach(const struct stv090x_config *config,
-					   struct i2c_adapter *i2c,
-					   enum stv090x_demodulator demod);
-
-/* dir = 0 -> output, dir = 1 -> input/open-drain */
-extern int stv090x_set_gpio(struct dvb_frontend *fe, u8 gpio,
-		u8 dir, u8 value, u8 xor_value);
-
-#else
-
-static inline struct dvb_frontend *stv090x_attach(const struct stv090x_config *config,
-						  struct i2c_adapter *i2c,
-						  enum stv090x_demodulator demod)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-static inline int stv090x_set_gpio(struct dvb_frontend *fe, u8 gpio,
-		u8 opd, u8 value, u8 xor_value)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return -ENODEV;
-}
-#endif /* CONFIG_DVB_STV090x */
-
-#endif /* __STV090x_H */
diff --git a/drivers/media/dvb/frontends/stv090x_priv.h b/drivers/media/dvb/frontends/stv090x_priv.h
deleted file mode 100644
index 5b780c8..0000000
--- a/drivers/media/dvb/frontends/stv090x_priv.h
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
-	STV0900/0903 Multistandard Broadcast Frontend driver
-	Copyright (C) Manu Abraham <abraham.manu@gmail.com>
-
-	Copyright (C) ST Microelectronics
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __STV090x_PRIV_H
-#define __STV090x_PRIV_H
-
-#include "dvb_frontend.h"
-
-#define FE_ERROR				0
-#define FE_NOTICE				1
-#define FE_INFO					2
-#define FE_DEBUG				3
-#define FE_DEBUGREG				4
-
-#define dprintk(__y, __z, format, arg...) do {						\
-	if (__z) {									\
-		if	((verbose > FE_ERROR) && (verbose > __y))			\
-			printk(KERN_ERR "%s: " format "\n", __func__ , ##arg);		\
-		else if	((verbose > FE_NOTICE) && (verbose > __y))			\
-			printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg);	\
-		else if ((verbose > FE_INFO) && (verbose > __y))			\
-			printk(KERN_INFO "%s: " format "\n", __func__ , ##arg);		\
-		else if ((verbose > FE_DEBUG) && (verbose > __y))			\
-			printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg);	\
-	} else {									\
-		if (verbose > __y)							\
-			printk(format, ##arg);						\
-	}										\
-} while (0)
-
-#define STV090x_READ_DEMOD(__state, __reg) ((			\
-	(__state)->demod == STV090x_DEMODULATOR_1)	?	\
-	stv090x_read_reg(__state, STV090x_P2_##__reg) :		\
-	stv090x_read_reg(__state, STV090x_P1_##__reg))
-
-#define STV090x_WRITE_DEMOD(__state, __reg, __data) ((		\
-	(__state)->demod == STV090x_DEMODULATOR_1)	?	\
-	stv090x_write_reg(__state, STV090x_P2_##__reg, __data) :\
-	stv090x_write_reg(__state, STV090x_P1_##__reg, __data))
-
-#define STV090x_ADDR_OFFST(__state, __x) ((			\
-	(__state->demod) == STV090x_DEMODULATOR_1)	?	\
-		STV090x_P1_##__x :				\
-		STV090x_P2_##__x)
-
-
-#define STV090x_SETFIELD(mask, bitf, val)	(mask = (mask & (~(((1 << STV090x_WIDTH_##bitf) - 1) <<\
-							 STV090x_OFFST_##bitf))) | \
-							 (val << STV090x_OFFST_##bitf))
-
-#define STV090x_GETFIELD(val, bitf)		((val >> STV090x_OFFST_##bitf) & ((1 << STV090x_WIDTH_##bitf) - 1))
-
-
-#define STV090x_SETFIELD_Px(mask, bitf, val)	(mask = (mask & (~(((1 << STV090x_WIDTH_Px_##bitf) - 1) <<\
-							 STV090x_OFFST_Px_##bitf))) | \
-							 (val << STV090x_OFFST_Px_##bitf))
-
-#define STV090x_GETFIELD_Px(val, bitf)		((val >> STV090x_OFFST_Px_##bitf) & ((1 << STV090x_WIDTH_Px_##bitf) - 1))
-
-#define MAKEWORD16(__a, __b)			(((__a) << 8) | (__b))
-
-#define MSB(__x)				((__x >> 8) & 0xff)
-#define LSB(__x)				(__x & 0xff)
-
-
-#define STV090x_IQPOWER_THRESHOLD	  30
-#define STV090x_SEARCH_AGC2_TH_CUT20	 700
-#define STV090x_SEARCH_AGC2_TH_CUT30	1400
-
-#define STV090x_SEARCH_AGC2_TH(__ver)	\
-	((__ver <= 0x20) ?		\
-	STV090x_SEARCH_AGC2_TH_CUT20 :	\
-	STV090x_SEARCH_AGC2_TH_CUT30)
-
-enum stv090x_signal_state {
-	STV090x_NOAGC1,
-	STV090x_NOCARRIER,
-	STV090x_NODATA,
-	STV090x_DATAOK,
-	STV090x_RANGEOK,
-	STV090x_OUTOFRANGE
-};
-
-enum stv090x_fec {
-	STV090x_PR12 = 0,
-	STV090x_PR23,
-	STV090x_PR34,
-	STV090x_PR45,
-	STV090x_PR56,
-	STV090x_PR67,
-	STV090x_PR78,
-	STV090x_PR89,
-	STV090x_PR910,
-	STV090x_PRERR
-};
-
-enum stv090x_modulation {
-	STV090x_QPSK,
-	STV090x_8PSK,
-	STV090x_16APSK,
-	STV090x_32APSK,
-	STV090x_UNKNOWN
-};
-
-enum stv090x_frame {
-	STV090x_LONG_FRAME,
-	STV090x_SHORT_FRAME
-};
-
-enum stv090x_pilot {
-	STV090x_PILOTS_OFF,
-	STV090x_PILOTS_ON
-};
-
-enum stv090x_rolloff {
-	STV090x_RO_35,
-	STV090x_RO_25,
-	STV090x_RO_20
-};
-
-enum stv090x_inversion {
-	STV090x_IQ_AUTO,
-	STV090x_IQ_NORMAL,
-	STV090x_IQ_SWAP
-};
-
-enum stv090x_modcod {
-	STV090x_DUMMY_PLF = 0,
-	STV090x_QPSK_14,
-	STV090x_QPSK_13,
-	STV090x_QPSK_25,
-	STV090x_QPSK_12,
-	STV090x_QPSK_35,
-	STV090x_QPSK_23,
-	STV090x_QPSK_34,
-	STV090x_QPSK_45,
-	STV090x_QPSK_56,
-	STV090x_QPSK_89,
-	STV090x_QPSK_910,
-	STV090x_8PSK_35,
-	STV090x_8PSK_23,
-	STV090x_8PSK_34,
-	STV090x_8PSK_56,
-	STV090x_8PSK_89,
-	STV090x_8PSK_910,
-	STV090x_16APSK_23,
-	STV090x_16APSK_34,
-	STV090x_16APSK_45,
-	STV090x_16APSK_56,
-	STV090x_16APSK_89,
-	STV090x_16APSK_910,
-	STV090x_32APSK_34,
-	STV090x_32APSK_45,
-	STV090x_32APSK_56,
-	STV090x_32APSK_89,
-	STV090x_32APSK_910,
-	STV090x_MODCODE_UNKNOWN
-};
-
-enum stv090x_search {
-	STV090x_SEARCH_DSS = 0,
-	STV090x_SEARCH_DVBS1,
-	STV090x_SEARCH_DVBS2,
-	STV090x_SEARCH_AUTO
-};
-
-enum stv090x_algo {
-	STV090x_BLIND_SEARCH,
-	STV090x_COLD_SEARCH,
-	STV090x_WARM_SEARCH
-};
-
-enum stv090x_delsys {
-	STV090x_ERROR = 0,
-	STV090x_DVBS1 = 1,
-	STV090x_DVBS2,
-	STV090x_DSS
-};
-
-struct stv090x_long_frame_crloop {
-	enum stv090x_modcod	modcod;
-
-	u8 crl_pilots_on_2;
-	u8 crl_pilots_off_2;
-	u8 crl_pilots_on_5;
-	u8 crl_pilots_off_5;
-	u8 crl_pilots_on_10;
-	u8 crl_pilots_off_10;
-	u8 crl_pilots_on_20;
-	u8 crl_pilots_off_20;
-	u8 crl_pilots_on_30;
-	u8 crl_pilots_off_30;
-};
-
-struct stv090x_short_frame_crloop {
-	enum stv090x_modulation	modulation;
-
-	u8 crl_2;  /*      SR <   3M */
-	u8 crl_5;  /*  3 < SR <=  7M */
-	u8 crl_10; /*  7 < SR <= 15M */
-	u8 crl_20; /* 10 < SR <= 25M */
-	u8 crl_30; /* 10 < SR <= 45M */
-};
-
-struct stv090x_reg {
-	u16 addr;
-	u8  data;
-};
-
-struct stv090x_tab {
-	s32 real;
-	s32 read;
-};
-
-struct stv090x_internal {
-	struct i2c_adapter 	*i2c_adap;
-	u8			i2c_addr;
-
-	struct mutex		demod_lock; /* Lock access to shared register */
-	struct mutex		tuner_lock; /* Lock access to tuners */
-	s32			mclk; /* Masterclock Divider factor */
-	u32			dev_ver;
-
-	int			num_used;
-};
-
-struct stv090x_state {
-	enum stv090x_device		device;
-	enum stv090x_demodulator	demod;
-	enum stv090x_mode		demod_mode;
-	struct stv090x_internal		*internal;
-
-	struct i2c_adapter		*i2c;
-	const struct stv090x_config	*config;
-	struct dvb_frontend		frontend;
-
-	u32				*verbose; /* Cached module verbosity */
-
-	enum stv090x_delsys		delsys;
-	enum stv090x_fec		fec;
-	enum stv090x_modulation		modulation;
-	enum stv090x_modcod		modcod;
-	enum stv090x_search		search_mode;
-	enum stv090x_frame		frame_len;
-	enum stv090x_pilot		pilots;
-	enum stv090x_rolloff		rolloff;
-	enum stv090x_inversion		inversion;
-	enum stv090x_algo		algo;
-
-	u32				frequency;
-	u32				srate;
-
-	s32				tuner_bw;
-
-	s32				search_range;
-
-	s32				DemodTimeout;
-	s32				FecTimeout;
-};
-
-#endif /* __STV090x_PRIV_H */
diff --git a/drivers/media/dvb/frontends/stv090x_reg.h b/drivers/media/dvb/frontends/stv090x_reg.h
deleted file mode 100644
index 93741ee..0000000
--- a/drivers/media/dvb/frontends/stv090x_reg.h
+++ /dev/null
@@ -1,2371 +0,0 @@
-/*
-	STV0900/0903 Multistandard Broadcast Frontend driver
-	Copyright (C) Manu Abraham <abraham.manu@gmail.com>
-
-	Copyright (C) ST Microelectronics
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __STV090x_REG_H
-#define __STV090x_REG_H
-
-#define STV090x_MID				0xf100
-#define STV090x_OFFST_MCHIP_IDENT_FIELD		4
-#define STV090x_WIDTH_MCHIP_IDENT_FIELD		4
-#define STV090x_OFFST_MRELEASE_FIELD		0
-#define STV090x_WIDTH_MRELEASE_FIELD		4
-
-#define STV090x_DACR1				0xf113
-#define STV090x_OFFST_DACR1_MODE_FIELD		5
-#define STV090x_WIDTH_DACR1_MODE_FIELD		3
-#define STV090x_OFFST_DACR1_VALUE_FIELD		0
-#define STV090x_WIDTH_DACR1_VALUE_FIELD		4
-
-#define STV090x_DACR2				0xf114
-#define STV090x_OFFST_DACR2_VALUE_FIELD		0
-#define STV090x_WIDTH_DACR2_VALUE_FIELD		8
-
-#define STV090x_OUTCFG				0xf11c
-#define STV090x_OFFST_OUTSERRS1_HZ_FIELD	6
-#define STV090x_WIDTH_OUTSERRS1_HZ_FIELD	1
-#define STV090x_OFFST_OUTSERRS2_HZ_FIELD	5
-#define STV090x_WIDTH_OUTSERRS2_HZ_FIELD	1
-#define STV090x_OFFST_OUTSERRS3_HZ_FIELD	4
-#define STV090x_WIDTH_OUTSERRS3_HZ_FIELD	1
-#define STV090x_OFFST_OUTPARRS3_HZ_FIELD	3
-#define STV090x_WIDTH_OUTPARRS3_HZ_FIELD	1
-
-#define STV090x_MODECFG				0xf11d
-
-#define STV090x_IRQSTATUS3			0xf120
-#define STV090x_OFFST_SPLL_LOCK_FIELD		5
-#define STV090x_WIDTH_SPLL_LOCK_FIELD		1
-#define STV090x_OFFST_SSTREAM_LCK_3_FIELD	4
-#define STV090x_WIDTH_SSTREAM_LCK_3_FIELD	1
-#define STV090x_OFFST_SSTREAM_LCK_2_FIELD	3
-#define STV090x_WIDTH_SSTREAM_LCK_2_FIELD	1
-#define STV090x_OFFST_SSTREAM_LCK_1_FIELD	2
-#define STV090x_WIDTH_SSTREAM_LCK_1_FIELD	1
-#define STV090x_OFFST_SDVBS1_PRF_2_FIELD	1
-#define STV090x_WIDTH_SDVBS1_PRF_2_FIELD	1
-#define STV090x_OFFST_SDVBS1_PRF_1_FIELD	0
-#define STV090x_WIDTH_SDVBS1_PRF_1_FIELD	1
-
-#define STV090x_IRQSTATUS2			0xf121
-#define STV090x_OFFST_SSPY_ENDSIM_3_FIELD	7
-#define STV090x_WIDTH_SSPY_ENDSIM_3_FIELD	1
-#define STV090x_OFFST_SSPY_ENDSIM_2_FIELD	6
-#define STV090x_WIDTH_SSPY_ENDSIM_2_FIELD	1
-#define STV090x_OFFST_SSPY_ENDSIM_1_FIELD	5
-#define STV090x_WIDTH_SSPY_ENDSIM_1_FIELD	1
-#define STV090x_OFFST_SPKTDEL_ERROR_2_FIELD	4
-#define STV090x_WIDTH_SPKTDEL_ERROR_2_FIELD	1
-#define STV090x_OFFST_SPKTDEL_LOCKB_2_FIELD	3
-#define STV090x_WIDTH_SPKTDEL_LOCKB_2_FIELD	1
-#define STV090x_OFFST_SPKTDEL_LOCK_2_FIELD	2
-#define STV090x_WIDTH_SPKTDEL_LOCK_2_FIELD	1
-#define STV090x_OFFST_SPKTDEL_ERROR_1_FIELD	1
-#define STV090x_WIDTH_SPKTDEL_ERROR_1_FIELD	1
-#define STV090x_OFFST_SPKTDEL_LOCKB_1_FIELD	0
-#define STV090x_WIDTH_SPKTDEL_LOCKB_1_FIELD	1
-
-#define STV090x_IRQSTATUS1			0xf122
-#define STV090x_OFFST_SPKTDEL_LOCK_1_FIELD	7
-#define STV090x_WIDTH_SPKTDEL_LOCK_1_FIELD	1
-#define STV090x_OFFST_SDEMOD_LOCKB_2_FIELD	2
-#define STV090x_WIDTH_SDEMOD_LOCKB_2_FIELD	1
-#define STV090x_OFFST_SDEMOD_LOCK_2_FIELD	1
-#define STV090x_WIDTH_SDEMOD_LOCK_2_FIELD	1
-#define STV090x_OFFST_SDEMOD_IRQ_2_FIELD	0
-#define STV090x_WIDTH_SDEMOD_IRQ_2_FIELD	1
-
-#define STV090x_IRQSTATUS0			0xf123
-#define STV090x_OFFST_SDEMOD_LOCKB_1_FIELD	7
-#define STV090x_WIDTH_SDEMOD_LOCKB_1_FIELD	1
-#define STV090x_OFFST_SDEMOD_LOCK_1_FIELD	6
-#define STV090x_WIDTH_SDEMOD_LOCK_1_FIELD	1
-#define STV090x_OFFST_SDEMOD_IRQ_1_FIELD	5
-#define STV090x_WIDTH_SDEMOD_IRQ_1_FIELD	1
-#define STV090x_OFFST_SBCH_ERRFLAG_FIELD	4
-#define STV090x_WIDTH_SBCH_ERRFLAG_FIELD	1
-#define STV090x_OFFST_SDISEQC2RX_IRQ_FIELD	3
-#define STV090x_WIDTH_SDISEQC2RX_IRQ_FIELD	1
-#define STV090x_OFFST_SDISEQC2TX_IRQ_FIELD	2
-#define STV090x_WIDTH_SDISEQC2TX_IRQ_FIELD	1
-#define STV090x_OFFST_SDISEQC1RX_IRQ_FIELD	1
-#define STV090x_WIDTH_SDISEQC1RX_IRQ_FIELD	1
-#define STV090x_OFFST_SDISEQC1TX_IRQ_FIELD	0
-#define STV090x_WIDTH_SDISEQC1TX_IRQ_FIELD	1
-
-#define STV090x_IRQMASK3			0xf124
-#define STV090x_OFFST_MPLL_LOCK_FIELD		5
-#define STV090x_WIDTH_MPLL_LOCK_FIELD		1
-#define STV090x_OFFST_MSTREAM_LCK_3_FIELD	4
-#define STV090x_WIDTH_MSTREAM_LCK_3_FIELD	1
-#define STV090x_OFFST_MSTREAM_LCK_2_FIELD	3
-#define STV090x_WIDTH_MSTREAM_LCK_2_FIELD	1
-#define STV090x_OFFST_MSTREAM_LCK_1_FIELD	2
-#define STV090x_WIDTH_MSTREAM_LCK_1_FIELD	1
-#define STV090x_OFFST_MDVBS1_PRF_2_FIELD	1
-#define STV090x_WIDTH_MDVBS1_PRF_2_FIELD	1
-#define STV090x_OFFST_MDVBS1_PRF_1_FIELD	0
-#define STV090x_WIDTH_MDVBS1_PRF_1_FIELD	1
-
-#define STV090x_IRQMASK2			0xf125
-#define STV090x_OFFST_MSPY_ENDSIM_3_FIELD	7
-#define STV090x_WIDTH_MSPY_ENDSIM_3_FIELD	1
-#define STV090x_OFFST_MSPY_ENDSIM_2_FIELD	6
-#define STV090x_WIDTH_MSPY_ENDSIM_2_FIELD	1
-#define STV090x_OFFST_MSPY_ENDSIM_1_FIELD	5
-#define STV090x_WIDTH_MSPY_ENDSIM_1_FIELD	1
-#define STV090x_OFFST_MPKTDEL_ERROR_2_FIELD	4
-#define STV090x_WIDTH_MPKTDEL_ERROR_2_FIELD	1
-#define STV090x_OFFST_MPKTDEL_LOCKB_2_FIELD	3
-#define STV090x_WIDTH_MPKTDEL_LOCKB_2_FIELD	1
-#define STV090x_OFFST_MPKTDEL_LOCK_2_FIELD	2
-#define STV090x_WIDTH_MPKTDEL_LOCK_2_FIELD	1
-#define STV090x_OFFST_MPKTDEL_ERROR_1_FIELD	1
-#define STV090x_WIDTH_MPKTDEL_ERROR_1_FIELD	1
-#define STV090x_OFFST_MPKTDEL_LOCKB_1_FIELD	0
-#define STV090x_WIDTH_MPKTDEL_LOCKB_1_FIELD	1
-
-#define STV090x_IRQMASK1			0xf126
-#define STV090x_OFFST_MPKTDEL_LOCK_1_FIELD	7
-#define STV090x_WIDTH_MPKTDEL_LOCK_1_FIELD	1
-#define STV090x_OFFST_MEXTPINB2_FIELD		6
-#define STV090x_WIDTH_MEXTPINB2_FIELD		1
-#define STV090x_OFFST_MEXTPIN2_FIELD		5
-#define STV090x_WIDTH_MEXTPIN2_FIELD		1
-#define STV090x_OFFST_MEXTPINB1_FIELD		4
-#define STV090x_WIDTH_MEXTPINB1_FIELD		1
-#define STV090x_OFFST_MEXTPIN1_FIELD		3
-#define STV090x_WIDTH_MEXTPIN1_FIELD		1
-#define STV090x_OFFST_MDEMOD_LOCKB_2_FIELD	2
-#define STV090x_WIDTH_MDEMOD_LOCKB_2_FIELD	1
-#define STV090x_OFFST_MDEMOD_LOCK_2_FIELD	1
-#define STV090x_WIDTH_MDEMOD_LOCK_2_FIELD	1
-#define STV090x_OFFST_MDEMOD_IRQ_2_FIELD	0
-#define STV090x_WIDTH_MDEMOD_IRQ_2_FIELD	1
-
-#define STV090x_IRQMASK0			0xf127
-#define STV090x_OFFST_MDEMOD_LOCKB_1_FIELD	7
-#define STV090x_WIDTH_MDEMOD_LOCKB_1_FIELD	1
-#define STV090x_OFFST_MDEMOD_LOCK_1_FIELD	6
-#define STV090x_WIDTH_MDEMOD_LOCK_1_FIELD	1
-#define STV090x_OFFST_MDEMOD_IRQ_1_FIELD	5
-#define STV090x_WIDTH_MDEMOD_IRQ_1_FIELD	1
-#define STV090x_OFFST_MBCH_ERRFLAG_FIELD	4
-#define STV090x_WIDTH_MBCH_ERRFLAG_FIELD	1
-#define STV090x_OFFST_MDISEQC2RX_IRQ_FIELD	3
-#define STV090x_WIDTH_MDISEQC2RX_IRQ_FIELD	1
-#define STV090x_OFFST_MDISEQC2TX_IRQ_FIELD	2
-#define STV090x_WIDTH_MDISEQC2TX_IRQ_FIELD	1
-#define STV090x_OFFST_MDISEQC1RX_IRQ_FIELD	1
-#define STV090x_WIDTH_MDISEQC1RX_IRQ_FIELD	1
-#define STV090x_OFFST_MDISEQC1TX_IRQ_FIELD	0
-#define STV090x_WIDTH_MDISEQC1TX_IRQ_FIELD	1
-
-#define STV090x_I2CCFG				0xf129
-#define STV090x_OFFST_12C_FASTMODE_FIELD	3
-#define STV090x_WIDTH_12C_FASTMODE_FIELD	1
-#define STV090x_OFFST_12CADDR_INC_FIELD		0
-#define STV090x_WIDTH_12CADDR_INC_FIELD		2
-
-#define STV090x_Px_I2CRPT(__x)			(0xf12a + (__x - 1) * 0x1)
-#define STV090x_P1_I2CRPT			STV090x_Px_I2CRPT(1)
-#define STV090x_P2_I2CRPT			STV090x_Px_I2CRPT(2)
-#define STV090x_OFFST_Px_I2CT_ON_FIELD		7
-#define STV090x_WIDTH_Px_I2CT_ON_FIELD		1
-#define STV090x_OFFST_Px_ENARPT_LEVEL_FIELD	4
-#define STV090x_WIDTH_Px_ENARPT_LEVEL_FIELD	3
-#define STV090x_OFFST_Px_SCLT_DELAY_FIELD	3
-#define STV090x_WIDTH_Px_SCLT_DELAY_FIELD	1
-#define STV090x_OFFST_Px_STOP_ENABLE_FIELD	2
-#define STV090x_WIDTH_Px_STOP_ENABLE_FIELD	1
-#define STV090x_OFFST_Px_STOP_SDAT2SDA_FIELD	1
-#define STV090x_WIDTH_Px_STOP_SDAT2SDA_FIELD	1
-
-#define STV090x_CLKI2CFG			0xf140
-#define STV090x_OFFST_CLKI2_OPD_FIELD		7
-#define STV090x_WIDTH_CLKI2_OPD_FIELD		1
-#define STV090x_OFFST_CLKI2_CONFIG_FIELD	1
-#define STV090x_WIDTH_CLKI2_CONFIG_FIELD	6
-#define STV090x_OFFST_CLKI2_XOR_FIELD		0
-#define STV090x_WIDTH_CLKI2_XOR_FIELD		1
-
-#define STV090x_GPIOxCFG(__x)			(0xf141 + (__x - 1))
-#define STV090x_GPIO1CFG			STV090x_GPIOxCFG(1)
-#define STV090x_GPIO2CFG			STV090x_GPIOxCFG(2)
-#define STV090x_GPIO3CFG			STV090x_GPIOxCFG(3)
-#define STV090x_GPIO4CFG			STV090x_GPIOxCFG(4)
-#define STV090x_GPIO5CFG			STV090x_GPIOxCFG(5)
-#define STV090x_GPIO6CFG			STV090x_GPIOxCFG(6)
-#define STV090x_GPIO7CFG			STV090x_GPIOxCFG(7)
-#define STV090x_GPIO8CFG			STV090x_GPIOxCFG(8)
-#define STV090x_GPIO9CFG			STV090x_GPIOxCFG(9)
-#define STV090x_GPIO10CFG			STV090x_GPIOxCFG(10)
-#define STV090x_GPIO11CFG			STV090x_GPIOxCFG(11)
-#define STV090x_GPIO12CFG			STV090x_GPIOxCFG(12)
-#define STV090x_GPIO13CFG			STV090x_GPIOxCFG(13)
-#define STV090x_OFFST_GPIOx_OPD_FIELD		7
-#define STV090x_WIDTH_GPIOx_OPD_FIELD		1
-#define STV090x_OFFST_GPIOx_CONFIG_FIELD	1
-#define STV090x_WIDTH_GPIOx_CONFIG_FIELD	6
-#define STV090x_OFFST_GPIOx_XOR_FIELD		0
-#define STV090x_WIDTH_GPIOx_XOR_FIELD		1
-
-#define STV090x_CSxCFG(__x)			(0xf14e + __x * 0x1)
-#define STV090x_CS0CFG				STV090x_CSxCFG(0)
-#define STV090x_CS1CFG				STV090x_CSxCFG(1)
-#define STV090x_OFFST_CSX_OPD_FIELD		7
-#define STV090x_WIDTH_CSX_OPD_FIELD		1
-#define STV090x_OFFST_CSX_CONFIG_FIELD		1
-#define STV090x_WIDTH_CSX_CONFIG_FIELD		6
-#define STV090x_OFFST_CSX_XOR_FIELD		0
-#define STV090x_WIDTH_CSX_XOR_FIELD		1
-
-
-#define STV090x_STDBYCFG			0xf150
-#define STV090x_OFFST_STDBY_OPD_FIELD		7
-#define STV090x_WIDTH_STDBY_OPD_FIELD		1
-#define STV090x_OFFST_STDBY_CONFIG_FIELD	1
-#define STV090x_WIDTH_STDBY_CONFIG_FIELD	6
-#define STV090x_OFFST_STDBY_XOR_FIELD		0
-#define STV090x_WIDTH_STDBY_XOR_FIELD		1
-
-#define STV090x_DIRCLKCFG			0xf151
-#define STV090x_OFFST_DIRCLK_OPD_FIELD		7
-#define STV090x_WIDTH_DIRCLK_OPD_FIELD		1
-#define STV090x_OFFST_DIRCLK_CONFIG_FIELD	1
-#define STV090x_WIDTH_DIRCLK_CONFIG_FIELD	6
-#define STV090x_OFFST_DIRCLK_XOR_FIELD		0
-#define STV090x_WIDTH_DIRCLK_XOR_FIELD		1
-
-
-#define STV090x_AGCRFxCFG(__x)			(0xf152 + (__x - 1) * 0x4)
-#define STV090x_AGCRF1CFG			STV090x_AGCRFxCFG(1)
-#define STV090x_AGCRF2CFG			STV090x_AGCRFxCFG(2)
-#define STV090x_OFFST_AGCRFx_OPD_FIELD		7
-#define STV090x_WIDTH_AGCRFx_OPD_FIELD		1
-#define STV090x_OFFST_AGCRFx_CONFIG_FIELD	1
-#define STV090x_WIDTH_AGCRFx_CONFIG_FIELD	6
-#define STV090x_OFFST_AGCRFx_XOR_FIELD		0
-#define STV090x_WIDTH_AGCRFx_XOR_FIELD		1
-
-#define STV090x_SDATxCFG(__x)			(0xf153 + (__x - 1) * 0x4)
-#define STV090x_SDAT1CFG			STV090x_SDATxCFG(1)
-#define STV090x_SDAT2CFG			STV090x_SDATxCFG(2)
-#define STV090x_OFFST_SDATx_OPD_FIELD		7
-#define STV090x_WIDTH_SDATx_OPD_FIELD		1
-#define STV090x_OFFST_SDATx_CONFIG_FIELD	1
-#define STV090x_WIDTH_SDATx_CONFIG_FIELD	6
-#define STV090x_OFFST_SDATx_XOR_FIELD		0
-#define STV090x_WIDTH_SDATx_XOR_FIELD		1
-
-#define STV090x_SCLTxCFG(__x)			(0xf154 + (__x - 1) * 0x4)
-#define STV090x_SCLT1CFG			STV090x_SCLTxCFG(1)
-#define STV090x_SCLT2CFG			STV090x_SCLTxCFG(2)
-#define STV090x_OFFST_SCLTx_OPD_FIELD		7
-#define STV090x_WIDTH_SCLTx_OPD_FIELD		1
-#define STV090x_OFFST_SCLTx_CONFIG_FIELD	1
-#define STV090x_WIDTH_SCLTx_CONFIG_FIELD	6
-#define STV090x_OFFST_SCLTx_XOR_FIELD		0
-#define STV090x_WIDTH_SCLTx_XOR_FIELD		1
-
-#define STV090x_DISEQCOxCFG(__x)		(0xf155 + (__x - 1) * 0x4)
-#define STV090x_DISEQCO1CFG			STV090x_DISEQCOxCFG(1)
-#define STV090x_DISEQCO2CFG			STV090x_DISEQCOxCFG(2)
-#define STV090x_OFFST_DISEQCOx_OPD_FIELD	7
-#define STV090x_WIDTH_DISEQCOx_OPD_FIELD	1
-#define STV090x_OFFST_DISEQCOx_CONFIG_FIELD	1
-#define STV090x_WIDTH_DISEQCOx_CONFIG_FIELD	6
-#define STV090x_OFFST_DISEQCOx_XOR_FIELD	0
-#define STV090x_WIDTH_DISEQCOx_XOR_FIELD	1
-
-#define STV090x_CLKOUT27CFG			0xf15a
-#define STV090x_OFFST_CLKOUT27_OPD_FIELD	7
-#define STV090x_WIDTH_CLKOUT27_OPD_FIELD	1
-#define STV090x_OFFST_CLKOUT27_CONFIG_FIELD	1
-#define STV090x_WIDTH_CLKOUT27_CONFIG_FIELD	6
-#define STV090x_OFFST_CLKOUT27_XOR_FIELD	0
-#define STV090x_WIDTH_CLKOUT27_XOR_FIELD	1
-
-#define STV090x_ERRORxCFG(__x)			(0xf15b + (__x - 1) * 0x5)
-#define STV090x_ERROR1CFG			STV090x_ERRORxCFG(1)
-#define STV090x_ERROR2CFG			STV090x_ERRORxCFG(2)
-#define STV090x_ERROR3CFG			STV090x_ERRORxCFG(3)
-#define STV090x_OFFST_ERRORx_OPD_FIELD		7
-#define STV090x_WIDTH_ERRORx_OPD_FIELD		1
-#define STV090x_OFFST_ERRORx_CONFIG_FIELD	1
-#define STV090x_WIDTH_ERRORx_CONFIG_FIELD	6
-#define STV090x_OFFST_ERRORx_XOR_FIELD		0
-#define STV090x_WIDTH_ERRORx_XOR_FIELD		1
-
-#define STV090x_DPNxCFG(__x)			(0xf15c + (__x - 1) * 0x5)
-#define STV090x_DPN1CFG				STV090x_DPNxCFG(1)
-#define STV090x_DPN2CFG				STV090x_DPNxCFG(2)
-#define STV090x_DPN3CFG				STV090x_DPNxCFG(3)
-#define STV090x_OFFST_DPNx_OPD_FIELD		7
-#define STV090x_WIDTH_DPNx_OPD_FIELD		1
-#define STV090x_OFFST_DPNx_CONFIG_FIELD		1
-#define STV090x_WIDTH_DPNx_CONFIG_FIELD		6
-#define STV090x_OFFST_DPNx_XOR_FIELD		0
-#define STV090x_WIDTH_DPNx_XOR_FIELD		1
-
-#define STV090x_STROUTxCFG(__x)			(0xf15d + (__x - 1) * 0x5)
-#define STV090x_STROUT1CFG			STV090x_STROUTxCFG(1)
-#define STV090x_STROUT2CFG			STV090x_STROUTxCFG(2)
-#define STV090x_STROUT3CFG			STV090x_STROUTxCFG(3)
-#define STV090x_OFFST_STROUTx_OPD_FIELD		7
-#define STV090x_WIDTH_STROUTx_OPD_FIELD		1
-#define STV090x_OFFST_STROUTx_CONFIG_FIELD	1
-#define STV090x_WIDTH_STROUTx_CONFIG_FIELD	6
-#define STV090x_OFFST_STROUTx_XOR_FIELD		0
-#define STV090x_WIDTH_STROUTx_XOR_FIELD		1
-
-#define STV090x_CLKOUTxCFG(__x)			(0xf15e + (__x - 1) * 0x5)
-#define STV090x_CLKOUT1CFG			STV090x_CLKOUTxCFG(1)
-#define STV090x_CLKOUT2CFG			STV090x_CLKOUTxCFG(2)
-#define STV090x_CLKOUT3CFG			STV090x_CLKOUTxCFG(3)
-#define STV090x_OFFST_CLKOUTx_OPD_FIELD		7
-#define STV090x_WIDTH_CLKOUTx_OPD_FIELD		1
-#define STV090x_OFFST_CLKOUTx_CONFIG_FIELD	1
-#define STV090x_WIDTH_CLKOUTx_CONFIG_FIELD	6
-#define STV090x_OFFST_CLKOUTx_XOR_FIELD		0
-#define STV090x_WIDTH_CLKOUTx_XOR_FIELD		1
-
-#define STV090x_DATAxCFG(__x)			(0xf15f + (__x - 71) * 0x5)
-#define STV090x_DATA71CFG			STV090x_DATAxCFG(71)
-#define STV090x_DATA72CFG			STV090x_DATAxCFG(72)
-#define STV090x_DATA73CFG			STV090x_DATAxCFG(73)
-#define STV090x_OFFST_DATAx_OPD_FIELD		7
-#define STV090x_WIDTH_DATAx_OPD_FIELD		1
-#define STV090x_OFFST_DATAx_CONFIG_FIELD	1
-#define STV090x_WIDTH_DATAx_CONFIG_FIELD	6
-#define STV090x_OFFST_DATAx_XOR_FIELD		0
-#define STV090x_WIDTH_DATAx_XOR_FIELD		1
-
-#define STV090x_NCOARSE				0xf1b3
-#define STV090x_OFFST_M_DIV_FIELD		0
-#define STV090x_WIDTH_M_DIV_FIELD		8
-
-#define STV090x_SYNTCTRL			0xf1b6
-#define STV090x_OFFST_STANDBY_FIELD		7
-#define STV090x_WIDTH_STANDBY_FIELD		1
-#define STV090x_OFFST_BYPASSPLLCORE_FIELD	6
-#define STV090x_WIDTH_BYPASSPLLCORE_FIELD	1
-#define STV090x_OFFST_SELX1RATIO_FIELD		5
-#define STV090x_WIDTH_SELX1RATIO_FIELD		1
-#define STV090x_OFFST_STOP_PLL_FIELD		3
-#define STV090x_WIDTH_STOP_PLL_FIELD		1
-#define STV090x_OFFST_BYPASSPLLFSK_FIELD	2
-#define STV090x_WIDTH_BYPASSPLLFSK_FIELD	1
-#define STV090x_OFFST_SELOSCI_FIELD		1
-#define STV090x_WIDTH_SELOSCI_FIELD		1
-#define STV090x_OFFST_BYPASSPLLADC_FIELD	0
-#define STV090x_WIDTH_BYPASSPLLADC_FIELD	1
-
-#define STV090x_FILTCTRL			0xf1b7
-#define STV090x_OFFST_INV_CLK135_FIELD		7
-#define STV090x_WIDTH_INV_CLK135_FIELD		1
-#define STV090x_OFFST_SEL_FSKCKDIV_FIELD	2
-#define STV090x_WIDTH_SEL_FSKCKDIV_FIELD	1
-#define STV090x_OFFST_INV_CLKFSK_FIELD		1
-#define STV090x_WIDTH_INV_CLKFSK_FIELD		1
-#define STV090x_OFFST_BYPASS_APPLI_FIELD	0
-#define STV090x_WIDTH_BYPASS_APPLI_FIELD	1
-
-#define STV090x_PLLSTAT				0xf1b8
-#define STV090x_OFFST_PLLLOCK_FIELD		0
-#define STV090x_WIDTH_PLLLOCK_FIELD		1
-
-#define STV090x_STOPCLK1			0xf1c2
-#define STV090x_OFFST_STOP_CLKPKDT2_FIELD	6
-#define STV090x_WIDTH_STOP_CLKPKDT2_FIELD	1
-#define STV090x_OFFST_STOP_CLKPKDT1_FIELD	5
-#define STV090x_WIDTH_STOP_CLKPKDT1_FIELD	1
-#define STV090x_OFFST_STOP_CLKFEC_FIELD		4
-#define STV090x_WIDTH_STOP_CLKFEC_FIELD		1
-#define STV090x_OFFST_STOP_CLKADCI2_FIELD	3
-#define STV090x_WIDTH_STOP_CLKADCI2_FIELD	1
-#define STV090x_OFFST_INV_CLKADCI2_FIELD	2
-#define STV090x_WIDTH_INV_CLKADCI2_FIELD	1
-#define STV090x_OFFST_STOP_CLKADCI1_FIELD	1
-#define STV090x_WIDTH_STOP_CLKADCI1_FIELD	1
-#define STV090x_OFFST_INV_CLKADCI1_FIELD	0
-#define STV090x_WIDTH_INV_CLKADCI1_FIELD	1
-
-#define STV090x_STOPCLK2			0xf1c3
-#define STV090x_OFFST_STOP_CLKSAMP2_FIELD	4
-#define STV090x_WIDTH_STOP_CLKSAMP2_FIELD	1
-#define STV090x_OFFST_STOP_CLKSAMP1_FIELD	3
-#define STV090x_WIDTH_STOP_CLKSAMP1_FIELD	1
-#define STV090x_OFFST_STOP_CLKVIT2_FIELD	2
-#define STV090x_WIDTH_STOP_CLKVIT2_FIELD	1
-#define STV090x_OFFST_STOP_CLKVIT1_FIELD	1
-#define STV090x_WIDTH_STOP_CLKVIT1_FIELD	1
-#define STV090x_OFFST_STOP_CLKTS_FIELD		0
-#define STV090x_WIDTH_STOP_CLKTS_FIELD		1
-
-#define STV090x_TSTTNR0				0xf1df
-#define STV090x_OFFST_SEL_FSK_FIELD		7
-#define STV090x_WIDTH_SEL_FSK_FIELD		1
-#define STV090x_OFFST_FSK_PON_FIELD		2
-#define STV090x_WIDTH_FSK_PON_FIELD		1
-
-#define STV090x_TSTTNR1				0xf1e0
-#define STV090x_OFFST_ADC1_PON_FIELD		1
-#define STV090x_WIDTH_ADC1_PON_FIELD		1
-#define STV090x_OFFST_ADC1_INMODE_FIELD		0
-#define STV090x_WIDTH_ADC1_INMODE_FIELD		1
-
-#define STV090x_TSTTNR2				0xf1e1
-#define STV090x_OFFST_DISEQC1_PON_FIELD		5
-#define STV090x_WIDTH_DISEQC1_PON_FIELD		1
-
-#define STV090x_TSTTNR3				0xf1e2
-#define STV090x_OFFST_ADC2_PON_FIELD		1
-#define STV090x_WIDTH_ADC2_PON_FIELD		1
-#define STV090x_OFFST_ADC2_INMODE_FIELD		0
-#define STV090x_WIDTH_ADC2_INMODE_FIELD		1
-
-#define STV090x_TSTTNR4				0xf1e3
-#define STV090x_OFFST_DISEQC2_PON_FIELD		5
-#define STV090x_WIDTH_DISEQC2_PON_FIELD		1
-
-#define STV090x_FSKTFC2				0xf170
-#define STV090x_OFFST_FSKT_KMOD_FIELD		2
-#define STV090x_WIDTH_FSKT_KMOD_FIELD		6
-#define STV090x_OFFST_FSKT_CAR_FIELD		0
-#define STV090x_WIDTH_FSKT_CAR_FIELD		2
-
-#define STV090x_FSKTFC1				0xf171
-#define STV090x_OFFST_FSKTC1_CAR_FIELD		0
-#define STV090x_WIDTH_FSKTC1_CAR_FIELD		8
-
-#define STV090x_FSKTFC0				0xf172
-#define STV090x_OFFST_FSKTC0_CAR_FIELD		0
-#define STV090x_WIDTH_FSKTC0_CAR_FIELD		8
-
-#define STV090x_FSKTDELTAF1			0xf173
-#define STV090x_OFFST_FSKTF1_DELTAF_FIELD	0
-#define STV090x_WIDTH_FSKTF1_DELTAF_FIELD	4
-
-#define STV090x_FSKTDELTAF0			0xf174
-#define STV090x_OFFST_FSKTF0_DELTAF_FIELD	0
-#define STV090x_WIDTH_FSKTF0_DELTAF_FIELD	8
-
-#define STV090x_FSKTCTRL			0xf175
-#define STV090x_OFFST_FSKT_EN_SGN_FIELD		6
-#define STV090x_WIDTH_FSKT_EN_SGN_FIELD		1
-#define STV090x_OFFST_FSKT_MOD_SGN_FIELD	5
-#define STV090x_WIDTH_FSKT_MOD_SGN_FIELD	1
-#define STV090x_OFFST_FSKT_MOD_EN_FIELD		2
-#define STV090x_WIDTH_FSKT_MOD_EN_FIELD		3
-#define STV090x_OFFST_FSKT_DACMODE_FIELD	0
-#define STV090x_WIDTH_FSKT_DACMODE_FIELD	2
-
-#define STV090x_FSKRFC2				0xf176
-#define STV090x_OFFST_FSKRC2_DETSGN_FIELD	6
-#define STV090x_WIDTH_FSKRC2_DETSGN_FIELD	1
-#define STV090x_OFFST_FSKRC2_OUTSGN_FIELD	5
-#define STV090x_WIDTH_FSKRC2_OUTSGN_FIELD	1
-#define STV090x_OFFST_FSKRC2_KAGC_FIELD		2
-#define STV090x_WIDTH_FSKRC2_KAGC_FIELD		3
-#define STV090x_OFFST_FSKRC2_CAR_FIELD		0
-#define STV090x_WIDTH_FSKRC2_CAR_FIELD		2
-
-#define STV090x_FSKRFC1				0xf177
-#define STV090x_OFFST_FSKRC1_CAR_FIELD		0
-#define STV090x_WIDTH_FSKRC1_CAR_FIELD		8
-
-#define STV090x_FSKRFC0				0xf178
-#define STV090x_OFFST_FSKRC0_CAR_FIELD		0
-#define STV090x_WIDTH_FSKRC0_CAR_FIELD		8
-
-#define STV090x_FSKRK1				0xf179
-#define STV090x_OFFST_FSKR_K1_EXP_FIELD		5
-#define STV090x_WIDTH_FSKR_K1_EXP_FIELD		3
-#define STV090x_OFFST_FSKR_K1_MANT_FIELD	0
-#define STV090x_WIDTH_FSKR_K1_MANT_FIELD	5
-
-#define STV090x_FSKRK2				0xf17a
-#define STV090x_OFFST_FSKR_K2_EXP_FIELD		5
-#define STV090x_WIDTH_FSKR_K2_EXP_FIELD		3
-#define STV090x_OFFST_FSKR_K2_MANT_FIELD	0
-#define STV090x_WIDTH_FSKR_K2_MANT_FIELD	5
-
-#define STV090x_FSKRAGCR			0xf17b
-#define STV090x_OFFST_FSKR_OUTCTL_FIELD		6
-#define STV090x_WIDTH_FSKR_OUTCTL_FIELD		2
-#define STV090x_OFFST_FSKR_AGC_REF_FIELD	0
-#define STV090x_WIDTH_FSKR_AGC_REF_FIELD	6
-
-#define STV090x_FSKRAGC				0xf17c
-#define STV090x_OFFST_FSKR_AGC_ACCU_FIELD	0
-#define STV090x_WIDTH_FSKR_AGC_ACCU_FIELD	8
-
-#define STV090x_FSKRALPHA			0xf17d
-#define STV090x_OFFST_FSKR_ALPHA_EXP_FIELD	2
-#define STV090x_WIDTH_FSKR_ALPHA_EXP_FIELD	3
-#define STV090x_OFFST_FSKR_ALPHA_M_FIELD	0
-#define STV090x_WIDTH_FSKR_ALPHA_M_FIELD	2
-
-#define STV090x_FSKRPLTH1			0xf17e
-#define STV090x_OFFST_FSKR_BETA_FIELD		4
-#define STV090x_WIDTH_FSKR_BETA_FIELD		4
-#define STV090x_OFFST_FSKR_PLL_TRESH1_FIELD	0
-#define STV090x_WIDTH_FSKR_PLL_TRESH1_FIELD	4
-
-#define STV090x_FSKRPLTH0			0xf17f
-#define STV090x_OFFST_FSKR_PLL_TRESH0_FIELD	0
-#define STV090x_WIDTH_FSKR_PLL_TRESH0_FIELD	8
-
-#define STV090x_FSKRDF1				0xf180
-#define STV090x_OFFST_FSKR_DELTAF1_FIELD	0
-#define STV090x_WIDTH_FSKR_DELTAF1_FIELD	5
-
-#define STV090x_FSKRDF0				0xf181
-#define STV090x_OFFST_FSKR_DELTAF0_FIELD	0
-#define STV090x_WIDTH_FSKR_DELTAF0_FIELD	8
-
-#define STV090x_FSKRSTEPP			0xf182
-#define STV090x_OFFST_FSKR_STEP_PLUS_FIELD	0
-#define STV090x_WIDTH_FSKR_STEP_PLUS_FIELD	8
-
-#define STV090x_FSKRSTEPM			0xf183
-#define STV090x_OFFST_FSKR_STEP_MINUS_FIELD	0
-#define STV090x_WIDTH_FSKR_STEP_MINUS_FIELD	8
-
-#define STV090x_FSKRDET1			0xf184
-#define STV090x_OFFST_FSKR_CARDET1_ACCU_FIELD	0
-#define STV090x_WIDTH_FSKR_CARDET1_ACCU_FIELD	4
-
-#define STV090x_FSKRDET0			0xf185
-#define STV090x_OFFST_FSKR_CARDET0_ACCU_FIELD	0
-#define STV090x_WIDTH_FSKR_CARDET0_ACCU_FIELD	8
-
-#define STV090x_FSKRDTH1				0xf186
-#define STV090x_OFFST_FSKR_CARLOSS_THRESH1_FIELD	4
-#define STV090x_WIDTH_FSKR_CARLOSS_THRESH1_FIELD	4
-#define STV090x_OFFST_FSKR_CARDET_THRESH1_FIELD		0
-#define STV090x_WIDTH_FSKR_CARDET_THRESH1_FIELD		4
-
-#define STV090x_FSKRDTH0			0xf187
-#define STV090x_OFFST_FSKR_CARDET_THRESH0_FIELD	0
-#define STV090x_WIDTH_FSKR_CARDET_THRESH0_FIELD	8
-
-#define STV090x_FSKRLOSS			0xf188
-#define STV090x_OFFST_FSKR_CARLOSS_THRESH_FIELD	0
-#define STV090x_WIDTH_FSKR_CARLOSS_THRESH_FIELD	8
-
-#define STV090x_Px_DISTXCTL(__x)		(0xF1A0 - (__x - 1) * 0x10)
-#define STV090x_P1_DISTXCTL			STV090x_Px_DISTXCTL(1)
-#define STV090x_P2_DISTXCTL			STV090x_Px_DISTXCTL(2)
-#define STV090x_OFFST_Px_TIM_OFF_FIELD		7
-#define STV090x_WIDTH_Px_TIM_OFF_FIELD		1
-#define STV090x_OFFST_Px_DISEQC_RESET_FIELD	6
-#define STV090x_WIDTH_Px_DISEQC_RESET_FIELD	1
-#define STV090x_OFFST_Px_TIM_CMD_FIELD		4
-#define STV090x_WIDTH_Px_TIM_CMD_FIELD		2
-#define STV090x_OFFST_Px_DIS_PRECHARGE_FIELD	3
-#define STV090x_WIDTH_Px_DIS_PRECHARGE_FIELD	1
-#define STV090x_OFFST_Px_DISTX_MODE_FIELD	0
-#define STV090x_WIDTH_Px_DISTX_MODE_FIELD	3
-
-#define STV090x_Px_DISRXCTL(__x)		(0xf1a1 - (__x - 1) * 0x10)
-#define STV090x_P1_DISRXCTL			STV090x_Px_DISRXCTL(1)
-#define STV090x_P2_DISRXCTL			STV090x_Px_DISRXCTL(2)
-#define STV090x_OFFST_Px_RECEIVER_ON_FIELD	7
-#define STV090x_WIDTH_Px_RECEIVER_ON_FIELD	1
-#define STV090x_OFFST_Px_IGNO_SHORT22K_FIELD	6
-#define STV090x_WIDTH_Px_IGNO_SHORT22K_FIELD	1
-#define STV090x_OFFST_Px_ONECHIP_TRX_FIELD	5
-#define STV090x_WIDTH_Px_ONECHIP_TRX_FIELD	1
-#define STV090x_OFFST_Px_EXT_ENVELOP_FIELD	4
-#define STV090x_WIDTH_Px_EXT_ENVELOP_FIELD	1
-#define STV090x_OFFST_Px_PIN_SELECT_FIELD	2
-#define STV090x_WIDTH_Px_PIN_SELECT_FIELD	2
-#define STV090x_OFFST_Px_IRQ_RXEND_FIELD	1
-#define STV090x_WIDTH_Px_IRQ_RXEND_FIELD	1
-#define STV090x_OFFST_Px_IRQ_4NBYTES_FIELD	0
-#define STV090x_WIDTH_Px_IRQ_4NBYTES_FIELD	1
-
-#define STV090x_Px_DISRX_ST0(__x)		(0xf1a4 - (__x - 1) * 0x10)
-#define STV090x_P1_DISRX_ST0			STV090x_Px_DISRX_ST0(1)
-#define STV090x_P2_DISRX_ST0			STV090x_Px_DISRX_ST0(2)
-#define STV090x_OFFST_Px_RX_END_FIELD		7
-#define STV090x_WIDTH_Px_RX_END_FIELD		1
-#define STV090x_OFFST_Px_RX_ACTIVE_FIELD	6
-#define STV090x_WIDTH_Px_RX_ACTIVE_FIELD	1
-#define STV090x_OFFST_Px_SHORT_22KHZ_FIELD	5
-#define STV090x_WIDTH_Px_SHORT_22KHZ_FIELD	1
-#define STV090x_OFFST_Px_CONT_TONE_FIELD	4
-#define STV090x_WIDTH_Px_CONT_TONE_FIELD	1
-#define STV090x_OFFST_Px_FIFO_4BREADY_FIELD	3
-#define STV090x_WIDTH_Px_FIFO_4BREADY_FIELD	1
-#define STV090x_OFFST_Px_FIFO_EMPTY_FIELD	2
-#define STV090x_WIDTH_Px_FIFO_EMPTY_FIELD	1
-#define STV090x_OFFST_Px_ABORT_DISRX_FIELD	0
-#define STV090x_WIDTH_Px_ABORT_DISRX_FIELD	1
-
-#define STV090x_Px_DISRX_ST1(__x)		(0xf1a5 - (__x - 1) * 0x10)
-#define STV090x_P1_DISRX_ST1			STV090x_Px_DISRX_ST1(1)
-#define STV090x_P2_DISRX_ST1			STV090x_Px_DISRX_ST1(2)
-#define STV090x_OFFST_Px_RX_FAIL_FIELD		7
-#define STV090x_WIDTH_Px_RX_FAIL_FIELD		1
-#define STV090x_OFFST_Px_FIFO_PARITYFAIL_FIELD	6
-#define STV090x_WIDTH_Px_FIFO_PARITYFAIL_FIELD	1
-#define STV090x_OFFST_Px_RX_NONBYTE_FIELD	5
-#define STV090x_WIDTH_Px_RX_NONBYTE_FIELD	1
-#define STV090x_OFFST_Px_FIFO_OVERFLOW_FIELD	4
-#define STV090x_WIDTH_Px_FIFO_OVERFLOW_FIELD	1
-#define STV090x_OFFST_Px_FIFO_BYTENBR_FIELD	0
-#define STV090x_WIDTH_Px_FIFO_BYTENBR_FIELD	4
-
-#define STV090x_Px_DISRXDATA(__x)		(0xf1a6 - (__x - 1) * 0x10)
-#define STV090x_P1_DISRXDATA			STV090x_Px_DISRXDATA(1)
-#define STV090x_P2_DISRXDATA			STV090x_Px_DISRXDATA(2)
-#define STV090x_OFFST_Px_DISRX_DATA_FIELD	0
-#define STV090x_WIDTH_Px_DISRX_DATA_FIELD	8
-
-#define STV090x_Px_DISTXDATA(__x)		(0xf1a7 - (__x - 1) * 0x10)
-#define STV090x_P1_DISTXDATA			STV090x_Px_DISTXDATA(1)
-#define STV090x_P2_DISTXDATA			STV090x_Px_DISTXDATA(2)
-#define STV090x_OFFST_Px_DISEQC_FIFO_FIELD	0
-#define STV090x_WIDTH_Px_DISEQC_FIFO_FIELD	8
-
-#define STV090x_Px_DISTXSTATUS(__x)		(0xf1a8 - (__x - 1) * 0x10)
-#define STV090x_P1_DISTXSTATUS			STV090x_Px_DISTXSTATUS(1)
-#define STV090x_P2_DISTXSTATUS			STV090x_Px_DISTXSTATUS(2)
-#define STV090x_OFFST_Px_TX_FAIL_FIELD		7
-#define STV090x_WIDTH_Px_TX_FAIL_FIELD		1
-#define STV090x_OFFST_Px_FIFO_FULL_FIELD	6
-#define STV090x_WIDTH_Px_FIFO_FULL_FIELD	1
-#define STV090x_OFFST_Px_TX_IDLE_FIELD		5
-#define STV090x_WIDTH_Px_TX_IDLE_FIELD		1
-#define STV090x_OFFST_Px_GAP_BURST_FIELD	4
-#define STV090x_WIDTH_Px_GAP_BURST_FIELD	1
-#define STV090x_OFFST_Px_TXFIFO_BYTES_FIELD	0
-#define STV090x_WIDTH_Px_TXFIFO_BYTES_FIELD	4
-
-#define STV090x_Px_F22TX(__x)			(0xf1a9 - (__x - 1) * 0x10)
-#define STV090x_P1_F22TX			STV090x_Px_F22TX(1)
-#define STV090x_P2_F22TX			STV090x_Px_F22TX(2)
-#define STV090x_OFFST_Px_F22_REG_FIELD		0
-#define STV090x_WIDTH_Px_F22_REG_FIELD		8
-
-#define STV090x_Px_F22RX(__x)			(0xf1aa - (__x - 1) * 0x10)
-#define STV090x_P1_F22RX			STV090x_Px_F22RX(1)
-#define STV090x_P2_F22RX			STV090x_Px_F22RX(2)
-#define STV090x_OFFST_Px_F22RX_REG_FIELD	0
-#define STV090x_WIDTH_Px_F22RX_REG_FIELD	8
-
-#define STV090x_Px_ACRPRESC(__x)		(0xf1ac - (__x - 1) * 0x10)
-#define STV090x_P1_ACRPRESC			STV090x_Px_ACRPRESC(1)
-#define STV090x_P2_ACRPRESC			STV090x_Px_ACRPRESC(2)
-#define STV090x_OFFST_Px_ACR_PRESC_FIELD	0
-#define STV090x_WIDTH_Px_ACR_PRESC_FIELD	3
-
-#define STV090x_Px_ACRDIV(__x)			(0xf1ad - (__x - 1) * 0x10)
-#define STV090x_P1_ACRDIV			STV090x_Px_ACRDIV(1)
-#define STV090x_P2_ACRDIV			STV090x_Px_ACRDIV(2)
-#define STV090x_OFFST_Px_ACR_DIV_FIELD		0
-#define STV090x_WIDTH_Px_ACR_DIV_FIELD		8
-
-#define STV090x_Px_IQCONST(__x)			(0xF400 - (__x - 1) * 0x200)
-#define STV090x_P1_IQCONST			STV090x_Px_IQCONST(1)
-#define STV090x_P2_IQCONST			STV090x_Px_IQCONST(2)
-#define STV090x_OFFST_Px_CONSTEL_SELECT_FIELD	5
-#define STV090x_WIDTH_Px_CONSTEL_SELECT_FIELD	2
-
-#define STV090x_Px_NOSCFG(__x)			(0xF401 - (__x - 1) * 0x200)
-#define STV090x_P1_NOSCFG			STV090x_Px_NOSCFG(1)
-#define STV090x_P2_NOSCFG			STV090x_Px_NOSCFG(2)
-#define STV090x_OFFST_Px_NOSPLH_BETA_FIELD	3
-#define STV090x_WIDTH_Px_NOSPLH_BETA_FIELD	2
-#define STV090x_OFFST_Px_NOSDATA_BETA_FIELD	0
-#define STV090x_WIDTH_Px_NOSDATA_BETA_FIELD	3
-
-#define STV090x_Px_ISYMB(__x)			(0xF402 - (__x - 1) * 0x200)
-#define STV090x_P1_ISYMB			STV090x_Px_ISYMB(1)
-#define STV090x_P2_ISYMB			STV090x_Px_ISYMB(2)
-#define STV090x_OFFST_Px_I_SYMBOL_FIELD		0
-#define STV090x_WIDTH_Px_I_SYMBOL_FIELD		8
-
-#define STV090x_Px_QSYMB(__x)			(0xF403 - (__x - 1) * 0x200)
-#define STV090x_P1_QSYMB			STV090x_Px_QSYMB(1)
-#define STV090x_P2_QSYMB			STV090x_Px_QSYMB(2)
-#define STV090x_OFFST_Px_Q_SYMBOL_FIELD		0
-#define STV090x_WIDTH_Px_Q_SYMBOL_FIELD		8
-
-#define STV090x_Px_AGC1CFG(__x)			(0xF404 - (__x - 1) * 0x200)
-#define STV090x_P1_AGC1CFG			STV090x_Px_AGC1CFG(1)
-#define STV090x_P2_AGC1CFG			STV090x_Px_AGC1CFG(2)
-#define STV090x_OFFST_Px_DC_FROZEN_FIELD	7
-#define STV090x_WIDTH_Px_DC_FROZEN_FIELD	1
-#define STV090x_OFFST_Px_DC_CORRECT_FIELD	6
-#define STV090x_WIDTH_Px_DC_CORRECT_FIELD	1
-#define STV090x_OFFST_Px_AMM_FROZEN_FIELD	5
-#define STV090x_WIDTH_Px_AMM_FROZEN_FIELD	1
-#define STV090x_OFFST_Px_AMM_CORRECT_FIELD	4
-#define STV090x_WIDTH_Px_AMM_CORRECT_FIELD	1
-#define STV090x_OFFST_Px_QUAD_FROZEN_FIELD	3
-#define STV090x_WIDTH_Px_QUAD_FROZEN_FIELD	1
-#define STV090x_OFFST_Px_QUAD_CORRECT_FIELD	2
-#define STV090x_WIDTH_Px_QUAD_CORRECT_FIELD	1
-
-#define STV090x_Px_AGC1CN(__x)			(0xF406 - (__x - 1) * 0x200)
-#define STV090x_P1_AGC1CN			STV090x_Px_AGC1CN(1)
-#define STV090x_P2_AGC1CN			STV090x_Px_AGC1CN(2)
-#define STV090x_WIDTH_Px_AGC1_LOCKED_FIELD	7
-#define STV090x_OFFST_Px_AGC1_LOCKED_FIELD	1
-#define STV090x_OFFST_Px_AGC1_MINPOWER_FIELD	4
-#define STV090x_WIDTH_Px_AGC1_MINPOWER_FIELD	1
-#define STV090x_OFFST_Px_AGCOUT_FAST_FIELD	3
-#define STV090x_WIDTH_Px_AGCOUT_FAST_FIELD	1
-#define STV090x_OFFST_Px_AGCIQ_BETA_FIELD	0
-#define STV090x_WIDTH_Px_AGCIQ_BETA_FIELD	3
-
-#define STV090x_Px_AGC1REF(__x)			(0xF407 - (__x - 1) * 0x200)
-#define STV090x_P1_AGC1REF			STV090x_Px_AGC1REF(1)
-#define STV090x_P2_AGC1REF			STV090x_Px_AGC1REF(2)
-#define STV090x_OFFST_Px_AGCIQ_REF_FIELD	0
-#define STV090x_WIDTH_Px_AGCIQ_REF_FIELD	8
-
-#define STV090x_Px_IDCCOMP(__x)			(0xF408 - (__x - 1) * 0x200)
-#define STV090x_P1_IDCCOMP			STV090x_Px_IDCCOMP(1)
-#define STV090x_P2_IDCCOMP			STV090x_Px_IDCCOMP(2)
-#define STV090x_OFFST_Px_IAVERAGE_ADJ_FIELD	0
-#define STV090x_WIDTH_Px_IAVERAGE_ADJ_FIELD	8
-
-#define STV090x_Px_QDCCOMP(__x)			(0xF409 - (__x - 1) * 0x200)
-#define STV090x_P1_QDCCOMP			STV090x_Px_QDCCOMP(1)
-#define STV090x_P2_QDCCOMP			STV090x_Px_QDCCOMP(2)
-#define STV090x_OFFST_Px_QAVERAGE_ADJ_FIELD	0
-#define STV090x_WIDTH_Px_QAVERAGE_ADJ_FIELD	8
-
-#define STV090x_Px_POWERI(__x)			(0xF40A - (__x - 1) * 0x200)
-#define STV090x_P1_POWERI			STV090x_Px_POWERI(1)
-#define STV090x_P2_POWERI			STV090x_Px_POWERI(2)
-#define STV090x_OFFST_Px_POWER_I_FIELD		0
-#define STV090x_WIDTH_Px_POWER_I_FIELD		8
-
-#define STV090x_Px_POWERQ(__x)			(0xF40B - (__x - 1) * 0x200)
-#define STV090x_P1_POWERQ			STV090x_Px_POWERQ(1)
-#define STV090x_P2_POWERQ			STV090x_Px_POWERQ(2)
-#define STV090x_OFFST_Px_POWER_Q_FIELD		0
-#define STV090x_WIDTH_Px_POWER_Q_FIELD		8
-
-#define STV090x_Px_AGC1AMM(__x)			(0xF40C - (__x - 1) * 0x200)
-#define STV090x_P1_AGC1AMM			STV090x_Px_AGC1AMM(1)
-#define STV090x_P2_AGC1AMM			STV090x_Px_AGC1AMM(2)
-#define STV090x_OFFST_Px_AMM_VALUE_FIELD	0
-#define STV090x_WIDTH_Px_AMM_VALUE_FIELD	8
-
-#define STV090x_Px_AGC1QUAD(__x)		(0xF40D - (__x - 1) * 0x200)
-#define STV090x_P1_AGC1QUAD			STV090x_Px_AGC1QUAD(1)
-#define STV090x_P2_AGC1QUAD			STV090x_Px_AGC1QUAD(2)
-#define STV090x_OFFST_Px_QUAD_VALUE_FIELD	0
-#define STV090x_WIDTH_Px_QUAD_VALUE_FIELD	8
-
-#define STV090x_Px_AGCIQINy(__x, __y)		(0xF40F - (__x-1) * 0x200 - __y * 0x1)
-#define STV090x_P1_AGCIQIN0			STV090x_Px_AGCIQINy(1, 0)
-#define STV090x_P1_AGCIQIN1			STV090x_Px_AGCIQINy(1, 1)
-#define STV090x_P2_AGCIQIN0			STV090x_Px_AGCIQINy(2, 0)
-#define STV090x_P2_AGCIQIN1			STV090x_Px_AGCIQINy(2, 1)
-#define STV090x_OFFST_Px_AGCIQ_VALUE_FIELD	0
-#define STV090x_WIDTH_Px_AGCIQ_VALUE_FIELD	8
-
-#define STV090x_Px_DEMOD(__x)			(0xF410 - (__x - 1) * 0x200)
-#define STV090x_P1_DEMOD			STV090x_Px_DEMOD(1)
-#define STV090x_P2_DEMOD			STV090x_Px_DEMOD(2)
-#define STV090x_OFFST_Px_MANUAL_S2ROLLOFF_FIELD	7
-#define STV090x_WIDTH_Px_MANUAL_S2ROLLOFF_FIELD	1
-#define STV090x_OFFST_Px_DEMOD_STOP_FIELD	6
-#define STV090x_WIDTH_Px_DEMOD_STOP_FIELD	1
-#define STV090x_OFFST_Px_SPECINV_CONTROL_FIELD	4
-#define STV090x_WIDTH_Px_SPECINV_CONTROL_FIELD	2
-#define STV090x_OFFST_Px_FORCE_ENASAMP_FIELD	3
-#define STV090x_WIDTH_Px_FORCE_ENASAMP_FIELD	1
-#define STV090x_OFFST_Px_MANUAL_SXROLLOFF_FIELD	2
-#define STV090x_WIDTH_Px_MANUAL_SXROLLOFF_FIELD	1
-#define STV090x_OFFST_Px_ROLLOFF_CONTROL_FIELD	0
-#define STV090x_WIDTH_Px_ROLLOFF_CONTROL_FIELD	2
-
-#define STV090x_Px_DMDMODCOD(__x)		(0xF411 - (__x - 1) * 0x200)
-#define STV090x_P1_DMDMODCOD			STV090x_Px_DMDMODCOD(1)
-#define STV090x_P2_DMDMODCOD			STV090x_Px_DMDMODCOD(2)
-#define STV090x_OFFST_Px_MANUAL_MODCOD_FIELD	7
-#define STV090x_WIDTH_Px_MANUAL_MODCOD_FIELD	1
-#define STV090x_OFFST_Px_DEMOD_MODCOD_FIELD	2
-#define STV090x_WIDTH_Px_DEMOD_MODCOD_FIELD	5
-#define STV090x_OFFST_Px_DEMOD_TYPE_FIELD	0
-#define STV090x_WIDTH_Px_DEMOD_TYPE_FIELD	2
-
-#define STV090x_Px_DSTATUS(__x)			(0xF412 - (__x - 1) * 0x200)
-#define STV090x_P1_DSTATUS			STV090x_Px_DSTATUS(1)
-#define STV090x_P2_DSTATUS			STV090x_Px_DSTATUS(2)
-#define STV090x_OFFST_Px_CAR_LOCK_FIELD		7
-#define STV090x_WIDTH_Px_CAR_LOCK_FIELD		1
-#define STV090x_OFFST_Px_TMGLOCK_QUALITY_FIELD	5
-#define STV090x_WIDTH_Px_TMGLOCK_QUALITY_FIELD	2
-#define STV090x_OFFST_Px_LOCK_DEFINITIF_FIELD	3
-#define STV090x_WIDTH_Px_LOCK_DEFINITIF_FIELD	1
-
-#define STV090x_Px_DSTATUS2(__x)		(0xF413 - (__x - 1) * 0x200)
-#define STV090x_P1_DSTATUS2			STV090x_Px_DSTATUS2(1)
-#define STV090x_P2_DSTATUS2			STV090x_Px_DSTATUS2(2)
-#define STV090x_OFFST_Px_DEMOD_DELOCK_FIELD	7
-#define STV090x_WIDTH_Px_DEMOD_DELOCK_FIELD	1
-#define STV090x_OFFST_Px_AGC1_NOSIGNALACK_FIELD	3
-#define STV090x_WIDTH_Px_AGC1_NOSIGNALACK_FIELD	1
-#define STV090x_OFFST_Px_AGC2_OVERFLOW_FIELD	2
-#define STV090x_WIDTH_Px_AGC2_OVERFLOW_FIELD	1
-#define STV090x_OFFST_Px_CFR_OVERFLOW_FIELD	1
-#define STV090x_WIDTH_Px_CFR_OVERFLOW_FIELD	1
-#define STV090x_OFFST_Px_GAMMA_OVERUNDER_FIELD	0
-#define STV090x_WIDTH_Px_GAMMA_OVERUNDER_FIELD	1
-
-#define STV090x_Px_DMDCFGMD(__x)		(0xF414 - (__x - 1) * 0x200)
-#define STV090x_P1_DMDCFGMD			STV090x_Px_DMDCFGMD(1)
-#define STV090x_P2_DMDCFGMD			STV090x_Px_DMDCFGMD(2)
-#define STV090x_OFFST_Px_DVBS2_ENABLE_FIELD	7
-#define STV090x_WIDTH_Px_DVBS2_ENABLE_FIELD	1
-#define STV090x_OFFST_Px_DVBS1_ENABLE_FIELD	6
-#define STV090x_WIDTH_Px_DVBS1_ENABLE_FIELD	1
-#define STV090x_OFFST_Px_SCAN_ENABLE_FIELD	4
-#define STV090x_WIDTH_Px_SCAN_ENABLE_FIELD	1
-#define STV090x_OFFST_Px_CFR_AUTOSCAN_FIELD	3
-#define STV090x_WIDTH_Px_CFR_AUTOSCAN_FIELD	1
-#define STV090x_OFFST_Px_NOFORCE_RELOCK_FIELD	2
-#define STV090x_WIDTH_Px_NOFORCE_RELOCK_FIELD	1
-#define STV090x_OFFST_Px_TUN_RNG_FIELD		0
-#define STV090x_WIDTH_Px_TUN_RNG_FIELD		2
-
-#define STV090x_Px_DMDCFG2(__x)			(0xF415 - (__x - 1) * 0x200)
-#define STV090x_P1_DMDCFG2			STV090x_Px_DMDCFG2(1)
-#define STV090x_P2_DMDCFG2			STV090x_Px_DMDCFG2(2)
-#define STV090x_OFFST_Px_S1S2_SEQUENTIAL_FIELD	6
-#define STV090x_WIDTH_Px_S1S2_SEQUENTIAL_FIELD	1
-
-#define STV090x_Px_DMDISTATE(__x)		(0xF416 - (__x - 1) * 0x200)
-#define STV090x_P1_DMDISTATE			STV090x_Px_DMDISTATE(1)
-#define STV090x_P2_DMDISTATE			STV090x_Px_DMDISTATE(2)
-#define STV090x_OFFST_Px_I2C_DEMOD_MODE_FIELD	0
-#define STV090x_WIDTH_Px_I2C_DEMOD_MODE_FIELD	5
-
-#define STV090x_Px_DMDTOM(__x)			(0xF417 - (__x - 1) * 0x200) /* check */
-#define STV090x_P1_DMDTOM			STV090x_Px_DMDTOM(1)
-#define STV090x_P2_DMDTOM			STV090x_Px_DMDTOM(2)
-
-#define STV090x_Px_DMDSTATE(__x)		(0xF41B - (__x - 1) * 0x200)
-#define STV090x_P1_DMDSTATE			STV090x_Px_DMDSTATE(1)
-#define STV090x_P2_DMDSTATE			STV090x_Px_DMDSTATE(2)
-#define STV090x_OFFST_Px_HEADER_MODE_FIELD	5
-#define STV090x_WIDTH_Px_HEADER_MODE_FIELD	2
-
-#define STV090x_Px_DMDFLYW(__x)			(0xF41C - (__x - 1) * 0x200)
-#define STV090x_P1_DMDFLYW			STV090x_Px_DMDFLYW(1)
-#define STV090x_P2_DMDFLYW			STV090x_Px_DMDFLYW(2)
-#define STV090x_OFFST_Px_I2C_IRQVAL_FIELD	4
-#define STV090x_WIDTH_Px_I2C_IRQVAL_FIELD	4
-#define STV090x_OFFST_Px_FLYWHEEL_CPT_FIELD	0
-#define STV090x_WIDTH_Px_FLYWHEEL_CPT_FIELD	4
-
-#define STV090x_Px_DSTATUS3(__x)		(0xF41D - (__x - 1) * 0x200)
-#define STV090x_P1_DSTATUS3			STV090x_Px_DSTATUS3(1)
-#define STV090x_P2_DSTATUS3			STV090x_Px_DSTATUS3(2)
-#define STV090x_OFFST_Px_DEMOD_CFGMODE_FIELD	5
-#define STV090x_WIDTH_Px_DEMOD_CFGMODE_FIELD	2
-
-#define STV090x_Px_DMDCFG3(__x)			(0xF41E - (__x - 1) * 0x200)
-#define STV090x_P1_DMDCFG3			STV090x_Px_DMDCFG3(1)
-#define STV090x_P2_DMDCFG3			STV090x_Px_DMDCFG3(2)
-#define STV090x_OFFST_Px_NOSTOP_FIFOFULL_FIELD	3
-#define STV090x_WIDTH_Px_NOSTOP_FIFOFULL_FIELD	1
-
-#define STV090x_Px_DMDCFG4(__x)			(0xf41f - (__x - 1) * 0x200)
-#define STV090x_P1_DMDCFG4			STV090x_Px_DMDCFG4(1)
-#define STV090x_P2_DMDCFG4			STV090x_Px_DMDCFG4(2)
-
-#define STV090x_Px_CORRELMANT(__x)		(0xF420 - (__x - 1) * 0x200)
-#define STV090x_P1_CORRELMANT			STV090x_Px_CORRELMANT(1)
-#define STV090x_P2_CORRELMANT			STV090x_Px_CORRELMANT(2)
-#define STV090x_OFFST_Px_CORREL_MANT_FIELD	0
-#define STV090x_WIDTH_Px_CORREL_MANT_FIELD	8
-
-#define STV090x_Px_CORRELABS(__x)		(0xF421 - (__x - 1) * 0x200)
-#define STV090x_P1_CORRELABS			STV090x_Px_CORRELABS(1)
-#define STV090x_P2_CORRELABS			STV090x_Px_CORRELABS(2)
-#define STV090x_OFFST_Px_CORREL_ABS_FIELD	0
-#define STV090x_WIDTH_Px_CORREL_ABS_FIELD	8
-
-#define STV090x_Px_CORRELEXP(__x)		(0xF422 - (__x - 1) * 0x200)
-#define STV090x_P1_CORRELEXP			STV090x_Px_CORRELEXP(1)
-#define STV090x_P2_CORRELEXP			STV090x_Px_CORRELEXP(2)
-#define STV090x_OFFST_Px_CORREL_ABSEXP_FIELD	4
-#define STV090x_WIDTH_Px_CORREL_ABSEXP_FIELD	4
-#define STV090x_OFFST_Px_CORREL_EXP_FIELD	0
-#define STV090x_WIDTH_Px_CORREL_EXP_FIELD	4
-
-#define STV090x_Px_PLHMODCOD(__x)		(0xF424 - (__x - 1) * 0x200)
-#define STV090x_P1_PLHMODCOD			STV090x_Px_PLHMODCOD(1)
-#define STV090x_P2_PLHMODCOD			STV090x_Px_PLHMODCOD(2)
-#define STV090x_OFFST_Px_SPECINV_DEMOD_FIELD	7
-#define STV090x_WIDTH_Px_SPECINV_DEMOD_FIELD	1
-#define STV090x_OFFST_Px_PLH_MODCOD_FIELD	2
-#define STV090x_WIDTH_Px_PLH_MODCOD_FIELD	5
-#define STV090x_OFFST_Px_PLH_TYPE_FIELD		0
-#define STV090x_WIDTH_Px_PLH_TYPE_FIELD		2
-
-#define STV090x_Px_AGCK32(__x)			(0xf42b - (__x - 1) * 0x200)
-#define STV090x_P1_AGCK32			STV090x_Px_AGCK32(1)
-#define STV090x_P2_AGCK32			STV090x_Px_AGCK32(2)
-
-#define STV090x_Px_AGC2O(__x)			(0xF42C - (__x - 1) * 0x200)
-#define STV090x_P1_AGC2O			STV090x_Px_AGC2O(1)
-#define STV090x_P2_AGC2O			STV090x_Px_AGC2O(2)
-
-#define STV090x_Px_AGC2REF(__x)			(0xF42D - (__x - 1) * 0x200)
-#define STV090x_P1_AGC2REF			STV090x_Px_AGC2REF(1)
-#define STV090x_P2_AGC2REF			STV090x_Px_AGC2REF(2)
-#define STV090x_OFFST_Px_AGC2_REF_FIELD		0
-#define STV090x_WIDTH_Px_AGC2_REF_FIELD		8
-
-#define STV090x_Px_AGC1ADJ(__x)			(0xF42E - (__x - 1) * 0x200)
-#define STV090x_P1_AGC1ADJ			STV090x_Px_AGC1ADJ(1)
-#define STV090x_P2_AGC1ADJ			STV090x_Px_AGC1ADJ(2)
-#define STV090x_OFFST_Px_AGC1_ADJUSTED_FIELD	0
-#define STV090x_WIDTH_Px_AGC1_ADJUSTED_FIELD	7
-
-#define STV090x_Px_AGC2Iy(__x, __y)		(0xF437 - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_AGC2I0			STV090x_Px_AGC2Iy(1, 0)
-#define STV090x_P1_AGC2I1			STV090x_Px_AGC2Iy(1, 1)
-#define STV090x_P2_AGC2I0			STV090x_Px_AGC2Iy(2, 0)
-#define STV090x_P2_AGC2I1			STV090x_Px_AGC2Iy(2, 1)
-#define STV090x_OFFST_Px_AGC2_INTEGRATOR_FIELD	0
-#define STV090x_WIDTH_Px_AGC2_INTEGRATOR_FIELD	8
-
-#define STV090x_Px_CARCFG(__x)			(0xF438 - (__x - 1) * 0x200)
-#define STV090x_P1_CARCFG			STV090x_Px_CARCFG(1)
-#define STV090x_P2_CARCFG			STV090x_Px_CARCFG(2)
-#define STV090x_OFFST_Px_EN_CAR2CENTER_FIELD	5
-#define STV090x_WIDTH_Px_EN_CAR2CENTER_FIELD	1
-#define STV090x_OFFST_Px_ROTATON_FIELD		2
-#define STV090x_WIDTH_Px_ROTATON_FIELD		1
-#define STV090x_OFFST_Px_PH_DET_ALGO_FIELD	0
-#define STV090x_WIDTH_Px_PH_DET_ALGO_FIELD	2
-
-#define STV090x_Px_ACLC(__x)			(0xF439 - (__x - 1) * 0x200)
-#define STV090x_P1_ACLC				STV090x_Px_ACLC(1)
-#define STV090x_P2_ACLC				STV090x_Px_ACLC(2)
-#define STV090x_OFFST_Px_CAR_ALPHA_MANT_FIELD	4
-#define STV090x_WIDTH_Px_CAR_ALPHA_MANT_FIELD	2
-#define STV090x_OFFST_Px_CAR_ALPHA_EXP_FIELD	0
-#define STV090x_WIDTH_Px_CAR_ALPHA_EXP_FIELD	4
-
-#define STV090x_Px_BCLC(__x)			(0xF43A - (__x - 1) * 0x200)
-#define STV090x_P1_BCLC				STV090x_Px_BCLC(1)
-#define STV090x_P2_BCLC				STV090x_Px_BCLC(2)
-#define STV090x_OFFST_Px_CAR_BETA_MANT_FIELD	4
-#define STV090x_WIDTH_Px_CAR_BETA_MANT_FIELD	2
-#define STV090x_OFFST_Px_CAR_BETA_EXP_FIELD	0
-#define STV090x_WIDTH_Px_CAR_BETA_EXP_FIELD	4
-
-#define STV090x_Px_CARFREQ(__x)			(0xF43D - (__x - 1) * 0x200)
-#define STV090x_P1_CARFREQ			STV090x_Px_CARFREQ(1)
-#define STV090x_P2_CARFREQ			STV090x_Px_CARFREQ(2)
-#define STV090x_OFFST_Px_KC_COARSE_EXP_FIELD	4
-#define STV090x_WIDTH_Px_KC_COARSE_EXP_FIELD	4
-#define STV090x_OFFST_Px_BETA_FREQ_FIELD	0
-#define STV090x_WIDTH_Px_BETA_FREQ_FIELD	4
-
-#define STV090x_Px_CARHDR(__x)			(0xF43E - (__x - 1) * 0x200)
-#define STV090x_P1_CARHDR			STV090x_Px_CARHDR(1)
-#define STV090x_P2_CARHDR			STV090x_Px_CARHDR(2)
-#define STV090x_OFFST_Px_FREQ_HDR_FIELD		0
-#define STV090x_WIDTH_Px_FREQ_HDR_FIELD		8
-
-#define STV090x_Px_LDT(__x)			(0xF43F - (__x - 1) * 0x200)
-#define STV090x_P1_LDT				STV090x_Px_LDT(1)
-#define STV090x_P2_LDT				STV090x_Px_LDT(2)
-#define STV090x_OFFST_Px_CARLOCK_THRES_FIELD	0
-#define STV090x_WIDTH_Px_CARLOCK_THRES_FIELD	8
-
-#define STV090x_Px_LDT2(__x)			(0xF440 - (__x - 1) * 0x200)
-#define STV090x_P1_LDT2				STV090x_Px_LDT2(1)
-#define STV090x_P2_LDT2				STV090x_Px_LDT2(2)
-#define STV090x_OFFST_Px_CARLOCK_THRES2_FIELD	0
-#define STV090x_WIDTH_Px_CARLOCK_THRES2_FIELD	8
-
-#define STV090x_Px_CFRICFG(__x)			(0xF441 - (__x - 1) * 0x200)
-#define STV090x_P1_CFRICFG			STV090x_Px_CFRICFG(1)
-#define STV090x_P2_CFRICFG			STV090x_Px_CFRICFG(2)
-#define STV090x_OFFST_Px_NEG_CFRSTEP_FIELD	0
-#define STV090x_WIDTH_Px_NEG_CFRSTEP_FIELD	1
-
-#define STV090x_Pn_CFRUPy(__x, __y)		(0xF443 - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_CFRUP0			STV090x_Pn_CFRUPy(1, 0)
-#define STV090x_P1_CFRUP1			STV090x_Pn_CFRUPy(1, 1)
-#define STV090x_P2_CFRUP0			STV090x_Pn_CFRUPy(2, 0)
-#define STV090x_P2_CFRUP1			STV090x_Pn_CFRUPy(2, 1)
-#define STV090x_OFFST_Px_CFR_UP_FIELD		0
-#define STV090x_WIDTH_Px_CFR_UP_FIELD		8
-
-#define STV090x_Pn_CFRLOWy(__x, __y)		(0xF447 - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_CFRLOW0			STV090x_Pn_CFRLOWy(1, 0)
-#define STV090x_P1_CFRLOW1			STV090x_Pn_CFRLOWy(1, 1)
-#define STV090x_P2_CFRLOW0			STV090x_Pn_CFRLOWy(2, 0)
-#define STV090x_P2_CFRLOW1			STV090x_Pn_CFRLOWy(2, 1)
-#define STV090x_OFFST_Px_CFR_LOW_FIELD		0
-#define STV090x_WIDTH_Px_CFR_LOW_FIELD		8
-
-#define STV090x_Pn_CFRINITy(__x, __y)		(0xF449 - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_CFRINIT0			STV090x_Pn_CFRINITy(1, 0)
-#define STV090x_P1_CFRINIT1			STV090x_Pn_CFRINITy(1, 1)
-#define STV090x_P2_CFRINIT0			STV090x_Pn_CFRINITy(2, 0)
-#define STV090x_P2_CFRINIT1			STV090x_Pn_CFRINITy(2, 1)
-#define STV090x_OFFST_Px_CFR_INIT_FIELD		0
-#define STV090x_WIDTH_Px_CFR_INIT_FIELD		8
-
-#define STV090x_Px_CFRINC1(__x)			(0xF44A - (__x - 1) * 0x200)
-#define STV090x_P1_CFRINC1			STV090x_Px_CFRINC1(1)
-#define STV090x_P2_CFRINC1			STV090x_Px_CFRINC1(2)
-#define STV090x_OFFST_Px_CFR_INC1_FIELD		0
-#define STV090x_WIDTH_Px_CFR_INC1_FIELD		7 /* check */
-
-#define STV090x_Px_CFRINC0(__x)			(0xF44B - (__x - 1) * 0x200)
-#define STV090x_P1_CFRINC0			STV090x_Px_CFRINC0(1)
-#define STV090x_P2_CFRINC0			STV090x_Px_CFRINC0(2)
-#define STV090x_OFFST_Px_CFR_INC0_FIELD		4 /* check */
-#define STV090x_WIDTH_Px_CFR_INC0_FIELD		4
-
-#define STV090x_Pn_CFRy(__x, __y)		(0xF44E - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_CFR0				STV090x_Pn_CFRy(1, 0)
-#define STV090x_P1_CFR1				STV090x_Pn_CFRy(1, 1)
-#define STV090x_P1_CFR2				STV090x_Pn_CFRy(1, 2)
-#define STV090x_P2_CFR0				STV090x_Pn_CFRy(2, 0)
-#define STV090x_P2_CFR1				STV090x_Pn_CFRy(2, 1)
-#define STV090x_P2_CFR2				STV090x_Pn_CFRy(2, 2)
-#define STV090x_OFFST_Px_CAR_FREQ_FIELD		0
-#define STV090x_WIDTH_Px_CAR_FREQ_FIELD		8
-
-#define STV090x_Px_LDI(__x)			(0xF44F - (__x - 1) * 0x200)
-#define STV090x_P1_LDI				STV090x_Px_LDI(1)
-#define STV090x_P2_LDI				STV090x_Px_LDI(2)
-#define STV090x_OFFST_Px_LOCK_DET_INTEGR_FIELD	0
-#define STV090x_WIDTH_Px_LOCK_DET_INTEGR_FIELD	8
-
-#define STV090x_Px_TMGCFG(__x)			(0xF450 - (__x - 1) * 0x200)
-#define STV090x_P1_TMGCFG			STV090x_Px_TMGCFG(1)
-#define STV090x_P2_TMGCFG			STV090x_Px_TMGCFG(2)
-#define STV090x_OFFST_Px_TMGLOCK_BETA_FIELD	6
-#define STV090x_WIDTH_Px_TMGLOCK_BETA_FIELD	2
-#define STV090x_OFFST_Px_DO_TIMING_FIELD	4
-#define STV090x_WIDTH_Px_DO_TIMING_FIELD	1
-#define STV090x_OFFST_Px_TMG_MINFREQ_FIELD	0
-#define STV090x_WIDTH_Px_TMG_MINFREQ_FIELD	2
-
-#define STV090x_Px_RTC(__x)			(0xF451 - (__x - 1) * 0x200)
-#define STV090x_P1_RTC				STV090x_Px_RTC(1)
-#define STV090x_P2_RTC				STV090x_Px_RTC(2)
-#define STV090x_OFFST_Px_TMGALPHA_EXP_FIELD	4
-#define STV090x_WIDTH_Px_TMGALPHA_EXP_FIELD	4
-#define STV090x_OFFST_Px_TMGBETA_EXP_FIELD	0
-#define STV090x_WIDTH_Px_TMGBETA_EXP_FIELD	4
-
-#define STV090x_Px_RTCS2(__x)			(0xF452 - (__x - 1) * 0x200)
-#define STV090x_P1_RTCS2			STV090x_Px_RTCS2(1)
-#define STV090x_P2_RTCS2			STV090x_Px_RTCS2(2)
-#define STV090x_OFFST_Px_TMGALPHAS2_EXP_FIELD	4
-#define STV090x_WIDTH_Px_TMGALPHAS2_EXP_FIELD	4
-#define STV090x_OFFST_Px_TMGBETAS2_EXP_FIELD	0
-#define STV090x_WIDTH_Px_TMGBETAS2_EXP_FIELD	4
-
-#define STV090x_Px_TMGTHRISE(__x)		(0xF453 - (__x - 1) * 0x200)
-#define STV090x_P1_TMGTHRISE			STV090x_Px_TMGTHRISE(1)
-#define STV090x_P2_TMGTHRISE			STV090x_Px_TMGTHRISE(2)
-#define STV090x_OFFST_Px_TMGLOCK_THRISE_FIELD	0
-#define STV090x_WIDTH_Px_TMGLOCK_THRISE_FIELD	8
-
-#define STV090x_Px_TMGTHFALL(__x)		(0xF454 - (__x - 1) * 0x200)
-#define STV090x_P1_TMGTHFALL			STV090x_Px_TMGTHFALL(1)
-#define STV090x_P2_TMGTHFALL			STV090x_Px_TMGTHFALL(2)
-#define STV090x_OFFST_Px_TMGLOCK_THFALL_FIELD	0
-#define STV090x_WIDTH_Px_TMGLOCK_THFALL_FIELD	8
-
-#define STV090x_Px_SFRUPRATIO(__x)		(0xF455 - (__x - 1) * 0x200)
-#define STV090x_P1_SFRUPRATIO			STV090x_Px_SFRUPRATIO(1)
-#define STV090x_P2_SFRUPRATIO			STV090x_Px_SFRUPRATIO(2)
-#define STV090x_OFFST_Px_SFR_UPRATIO_FIELD	0
-#define STV090x_WIDTH_Px_SFR_UPRATIO_FIELD	8
-
-#define STV090x_Px_SFRLOWRATIO(__x)		(0xF456 - (__x - 1) * 0x200)
-#define STV090x_P1_SFRLOWRATIO			STV090x_Px_SFRLOWRATIO(1)
-#define STV090x_P2_SFRLOWRATIO			STV090x_Px_SFRLOWRATIO(2)
-#define STV090x_OFFST_Px_SFR_LOWRATIO_FIELD	0
-#define STV090x_WIDTH_Px_SFR_LOWRATIO_FIELD	8
-
-#define STV090x_Px_KREFTMG(__x)			(0xF458 - (__x - 1) * 0x200)
-#define STV090x_P1_KREFTMG			STV090x_Px_KREFTMG(1)
-#define STV090x_P2_KREFTMG			STV090x_Px_KREFTMG(2)
-#define STV090x_OFFST_Px_KREF_TMG_FIELD		0
-#define STV090x_WIDTH_Px_KREF_TMG_FIELD		8
-
-#define STV090x_Px_SFRSTEP(__x)			(0xF459 - (__x - 1) * 0x200)
-#define STV090x_P1_SFRSTEP			STV090x_Px_SFRSTEP(1)
-#define STV090x_P2_SFRSTEP			STV090x_Px_SFRSTEP(2)
-#define STV090x_OFFST_Px_SFR_SCANSTEP_FIELD	4
-#define STV090x_WIDTH_Px_SFR_SCANSTEP_FIELD	4
-#define STV090x_OFFST_Px_SFR_CENTERSTEP_FIELD	0
-#define STV090x_WIDTH_Px_SFR_CENTERSTEP_FIELD	4
-
-#define STV090x_Px_TMGCFG2(__x)			(0xF45A - (__x - 1) * 0x200)
-#define STV090x_P1_TMGCFG2			STV090x_Px_TMGCFG2(1)
-#define STV090x_P2_TMGCFG2			STV090x_Px_TMGCFG2(2)
-#define STV090x_OFFST_Px_SFRRATIO_FINE_FIELD	0
-#define STV090x_WIDTH_Px_SFRRATIO_FINE_FIELD	1
-
-#define STV090x_Px_SFRINIT1(__x)		(0xF45E - (__x - 1) * 0x200)
-#define STV090x_P1_SFRINIT1			STV090x_Px_SFRINIT1(1)
-#define STV090x_P2_SFRINIT1			STV090x_Px_SFRINIT1(2)
-#define STV090x_OFFST_Px_SFR_INIT1_FIELD	0
-#define STV090x_WIDTH_Px_SFR_INIT1_FIELD	7
-
-#define STV090x_Px_SFRINIT0(__x)		(0xF45F - (__x - 1) * 0x200)
-#define STV090x_P1_SFRINIT0			STV090x_Px_SFRINIT0(1)
-#define STV090x_P2_SFRINIT0			STV090x_Px_SFRINIT0(2)
-#define STV090x_OFFST_Px_SFR_INIT0_FIELD	0
-#define STV090x_WIDTH_Px_SFR_INIT0_FIELD	8
-
-#define STV090x_Px_SFRUP1(__x)			(0xF460 - (__x - 1) * 0x200)
-#define STV090x_P1_SFRUP1			STV090x_Px_SFRUP1(1)
-#define STV090x_P2_SFRUP1			STV090x_Px_SFRUP1(2)
-#define STV090x_OFFST_Px_SYMB_FREQ_UP1_FIELD	0
-#define STV090x_WIDTH_Px_SYMB_FREQ_UP1_FIELD	7
-
-#define STV090x_Px_SFRUP0(__x)			(0xF461 - (__x - 1) * 0x200)
-#define STV090x_P1_SFRUP0			STV090x_Px_SFRUP0(1)
-#define STV090x_P2_SFRUP0			STV090x_Px_SFRUP0(2)
-#define STV090x_OFFST_Px_SYMB_FREQ_UP0_FIELD	0
-#define STV090x_WIDTH_Px_SYMB_FREQ_UP0_FIELD	8
-
-#define STV090x_Px_SFRLOW1(__x)			(0xF462 - (__x - 1) * 0x200)
-#define STV090x_P1_SFRLOW1			STV090x_Px_SFRLOW1(1)
-#define STV090x_P2_SFRLOW1			STV090x_Px_SFRLOW1(2)
-#define STV090x_OFFST_Px_SYMB_FREQ_LOW1_FIELD	0
-#define STV090x_WIDTH_Px_SYMB_FREQ_LOW1_FIELD	7
-
-#define STV090x_Px_SFRLOW0(__x)			(0xF463 - (__x - 1) * 0x200)
-#define STV090x_P1_SFRLOW0			STV090x_Px_SFRLOW0(1)
-#define STV090x_P2_SFRLOW0			STV090x_Px_SFRLOW0(2)
-#define STV090x_OFFST_Px_SYMB_FREQ_LOW0_FIELD	0
-#define STV090x_WIDTH_Px_SYMB_FREQ_LOW0_FIELD	8
-
-#define STV090x_Px_SFRy(__x, __y)		(0xF467 - (__x-1) * 0x200 - __y)
-#define STV090x_P1_SFR0				STV090x_Px_SFRy(1, 0)
-#define STV090x_P1_SFR1				STV090x_Px_SFRy(1, 1)
-#define STV090x_P1_SFR2				STV090x_Px_SFRy(1, 2)
-#define STV090x_P1_SFR3				STV090x_Px_SFRy(1, 3)
-#define STV090x_P2_SFR0				STV090x_Px_SFRy(2, 0)
-#define STV090x_P2_SFR1				STV090x_Px_SFRy(2, 1)
-#define STV090x_P2_SFR2				STV090x_Px_SFRy(2, 2)
-#define STV090x_P2_SFR3				STV090x_Px_SFRy(2, 3)
-#define STV090x_OFFST_Px_SYMB_FREQ_FIELD	0
-#define STV090x_WIDTH_Px_SYMB_FREQ_FIELD	8
-
-#define STV090x_Px_TMGREG2(__x)			(0xF468 - (__x - 1) * 0x200)
-#define STV090x_P1_TMGREG2			STV090x_Px_TMGREG2(1)
-#define STV090x_P2_TMGREG2			STV090x_Px_TMGREG2(2)
-#define STV090x_OFFST_Px_TMGREG_FIELD		0
-#define STV090x_WIDTH_Px_TMGREG_FIELD		8
-
-#define STV090x_Px_TMGREG1(__x)			(0xF469 - (__x - 1) * 0x200)
-#define STV090x_P1_TMGREG1			STV090x_Px_TMGREG1(1)
-#define STV090x_P2_TMGREG1			STV090x_Px_TMGREG1(2)
-#define STV090x_OFFST_Px_TMGREG_FIELD		0
-#define STV090x_WIDTH_Px_TMGREG_FIELD		8
-
-#define STV090x_Px_TMGREG0(__x)			(0xF46A - (__x - 1) * 0x200)
-#define STV090x_P1_TMGREG0			STV090x_Px_TMGREG0(1)
-#define STV090x_P2_TMGREG0			STV090x_Px_TMGREG0(2)
-#define STV090x_OFFST_Px_TMGREG_FIELD		0
-#define STV090x_WIDTH_Px_TMGREG_FIELD		8
-
-#define STV090x_Px_TMGLOCKy(__x, __y)		(0xF46C - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_TMGLOCK0			STV090x_Px_TMGLOCKy(1, 0)
-#define STV090x_P1_TMGLOCK1			STV090x_Px_TMGLOCKy(1, 1)
-#define STV090x_P2_TMGLOCK0			STV090x_Px_TMGLOCKy(2, 0)
-#define STV090x_P2_TMGLOCK1			STV090x_Px_TMGLOCKy(2, 1)
-#define STV090x_OFFST_Px_TMGLOCK_LEVEL_FIELD	0
-#define STV090x_WIDTH_Px_TMGLOCK_LEVEL_FIELD	8
-
-#define STV090x_Px_TMGOBS(__x)			(0xF46D - (__x - 1) * 0x200)
-#define STV090x_P1_TMGOBS			STV090x_Px_TMGOBS(1)
-#define STV090x_P2_TMGOBS			STV090x_Px_TMGOBS(2)
-#define STV090x_OFFST_Px_ROLLOFF_STATUS_FIELD	6
-#define STV090x_WIDTH_Px_ROLLOFF_STATUS_FIELD	2
-
-#define STV090x_Px_EQUALCFG(__x)		(0xF46F - (__x - 1) * 0x200)
-#define STV090x_P1_EQUALCFG			STV090x_Px_EQUALCFG(1)
-#define STV090x_P2_EQUALCFG			STV090x_Px_EQUALCFG(2)
-#define STV090x_OFFST_Px_EQUAL_ON_FIELD		6
-#define STV090x_WIDTH_Px_EQUAL_ON_FIELD		1
-#define STV090x_OFFST_Px_MU_EQUALDFE_FIELD	0
-#define STV090x_WIDTH_Px_MU_EQUALDFE_FIELD	3
-
-#define STV090x_Px_EQUAIy(__x, __y)	(0xf470 - (__x-1) * 0x200 + 2 * (__y-1))
-#define STV090x_P1_EQUAI1			STV090x_Px_EQUAIy(1, 1)
-#define STV090x_P1_EQUAI2			STV090x_Px_EQUAIy(1, 2)
-#define STV090x_P1_EQUAI3			STV090x_Px_EQUAIy(1, 3)
-#define STV090x_P1_EQUAI4			STV090x_Px_EQUAIy(1, 4)
-#define STV090x_P1_EQUAI5			STV090x_Px_EQUAIy(1, 5)
-#define STV090x_P1_EQUAI6			STV090x_Px_EQUAIy(1, 6)
-#define STV090x_P1_EQUAI7			STV090x_Px_EQUAIy(1, 7)
-#define STV090x_P1_EQUAI8			STV090x_Px_EQUAIy(1, 8)
-
-#define STV090x_P2_EQUAI1			STV090x_Px_EQUAIy(2, 1)
-#define STV090x_P2_EQUAI2			STV090x_Px_EQUAIy(2, 2)
-#define STV090x_P2_EQUAI3			STV090x_Px_EQUAIy(2, 3)
-#define STV090x_P2_EQUAI4			STV090x_Px_EQUAIy(2, 4)
-#define STV090x_P2_EQUAI5			STV090x_Px_EQUAIy(2, 5)
-#define STV090x_P2_EQUAI6			STV090x_Px_EQUAIy(2, 6)
-#define STV090x_P2_EQUAI7			STV090x_Px_EQUAIy(2, 7)
-#define STV090x_P2_EQUAI8			STV090x_Px_EQUAIy(2, 8)
-#define STV090x_OFFST_Px_EQUA_ACCIy_FIELD	0
-#define STV090x_WIDTH_Px_EQUA_ACCIy_FIELD	8
-
-#define STV090x_Px_EQUAQy(__x, __y)	(0xf471 - (__x-1) * 0x200 + 2 * (__y-1))
-#define STV090x_P1_EQUAQ1			STV090x_Px_EQUAQy(1, 1)
-#define STV090x_P1_EQUAQ2			STV090x_Px_EQUAQy(1, 2)
-#define STV090x_P1_EQUAQ3			STV090x_Px_EQUAQy(1, 3)
-#define STV090x_P1_EQUAQ4			STV090x_Px_EQUAQy(1, 4)
-#define STV090x_P1_EQUAQ5			STV090x_Px_EQUAQy(1, 5)
-#define STV090x_P1_EQUAQ6			STV090x_Px_EQUAQy(1, 6)
-#define STV090x_P1_EQUAQ7			STV090x_Px_EQUAQy(1, 7)
-#define STV090x_P1_EQUAQ8			STV090x_Px_EQUAQy(1, 8)
-
-#define STV090x_P2_EQUAQ1			STV090x_Px_EQUAQy(2, 1)
-#define STV090x_P2_EQUAQ2			STV090x_Px_EQUAQy(2, 2)
-#define STV090x_P2_EQUAQ3			STV090x_Px_EQUAQy(2, 3)
-#define STV090x_P2_EQUAQ4			STV090x_Px_EQUAQy(2, 4)
-#define STV090x_P2_EQUAQ5			STV090x_Px_EQUAQy(2, 5)
-#define STV090x_P2_EQUAQ6			STV090x_Px_EQUAQy(2, 6)
-#define STV090x_P2_EQUAQ7			STV090x_Px_EQUAQy(2, 7)
-#define STV090x_P2_EQUAQ8			STV090x_Px_EQUAQy(2, 8)
-#define STV090x_OFFST_Px_EQUA_ACCQy_FIELD	0
-#define STV090x_WIDTH_Px_EQUA_ACCQy_FIELD	8
-
-#define STV090x_Px_NNOSDATATy(__x, __y)		(0xf481 - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_NNOSDATAT0			STV090x_Px_NNOSDATATy(1, 0)
-#define STV090x_P1_NNOSDATAT1			STV090x_Px_NNOSDATATy(1, 1)
-#define STV090x_P2_NNOSDATAT0			STV090x_Px_NNOSDATATy(2, 0)
-#define STV090x_P2_NNOSDATAT1			STV090x_Px_NNOSDATATy(2, 1)
-#define STV090x_OFFST_Px_NOSDATAT_NORMED_FIELD	0
-#define STV090x_WIDTH_Px_NOSDATAT_NORMED_FIELD	8
-
-#define STV090x_Px_NNOSDATAy(__x, __y)		(0xf483 - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_NNOSDATA0			STV090x_Px_NNOSDATAy(1, 0)
-#define STV090x_P1_NNOSDATA1			STV090x_Px_NNOSDATAy(1, 1)
-#define STV090x_P2_NNOSDATA0			STV090x_Px_NNOSDATAy(2, 0)
-#define STV090x_P2_NNOSDATA1			STV090x_Px_NNOSDATAy(2, 1)
-#define STV090x_OFFST_Px_NOSDATA_NORMED_FIELD	0
-#define STV090x_WIDTH_Px_NOSDATA_NORMED_FIELD	8
-
-#define STV090x_Px_NNOSPLHTy(__x, __y)		(0xf485 - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_NNOSPLHT0			STV090x_Px_NNOSPLHTy(1, 0)
-#define STV090x_P1_NNOSPLHT1			STV090x_Px_NNOSPLHTy(1, 1)
-#define STV090x_P2_NNOSPLHT0			STV090x_Px_NNOSPLHTy(2, 0)
-#define STV090x_P2_NNOSPLHT1			STV090x_Px_NNOSPLHTy(2, 1)
-#define STV090x_OFFST_Px_NOSPLHT_NORMED_FIELD	0
-#define STV090x_WIDTH_Px_NOSPLHT_NORMED_FIELD	8
-
-#define STV090x_Px_NNOSPLHy(__x, __y)		(0xf487 - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_NNOSPLH0			STV090x_Px_NNOSPLHy(1, 0)
-#define STV090x_P1_NNOSPLH1			STV090x_Px_NNOSPLHy(1, 1)
-#define STV090x_P2_NNOSPLH0			STV090x_Px_NNOSPLHy(2, 0)
-#define STV090x_P2_NNOSPLH1			STV090x_Px_NNOSPLHy(2, 1)
-#define STV090x_OFFST_Px_NOSPLH_NORMED_FIELD	0
-#define STV090x_WIDTH_Px_NOSPLH_NORMED_FIELD	8
-
-#define STV090x_Px_NOSDATATy(__x, __y)			(0xf489 - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_NOSDATAT0				STV090x_Px_NOSDATATy(1, 0)
-#define STV090x_P1_NOSDATAT1				STV090x_Px_NOSDATATy(1, 1)
-#define STV090x_P2_NOSDATAT0				STV090x_Px_NOSDATATy(2, 0)
-#define STV090x_P2_NOSDATAT1				STV090x_Px_NOSDATATy(2, 1)
-#define STV090x_OFFST_Px_NOSDATAT_UNNORMED_FIELD	0
-#define STV090x_WIDTH_Px_NOSDATAT_UNNORMED_FIELD	8
-
-#define STV090x_Px_NOSDATAy(__x, __y)		(0xf48b - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_NOSDATA0			STV090x_Px_NOSDATAy(1, 0)
-#define STV090x_P1_NOSDATA1			STV090x_Px_NOSDATAy(1, 1)
-#define STV090x_P2_NOSDATA0			STV090x_Px_NOSDATAy(2, 0)
-#define STV090x_P2_NOSDATA1			STV090x_Px_NOSDATAy(2, 1)
-#define STV090x_OFFST_Px_NOSDATA_UNNORMED_FIELD	0
-#define STV090x_WIDTH_Px_NOSDATA_UNNORMED_FIELD	8
-
-#define STV090x_Px_NOSPLHTy(__x, __y)		(0xf48d - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_NOSPLHT0			STV090x_Px_NOSPLHTy(1, 0)
-#define STV090x_P1_NOSPLHT1			STV090x_Px_NOSPLHTy(1, 1)
-#define STV090x_P2_NOSPLHT0			STV090x_Px_NOSPLHTy(2, 0)
-#define STV090x_P2_NOSPLHT1			STV090x_Px_NOSPLHTy(2, 1)
-#define STV090x_OFFST_Px_NOSPLHT_UNNORMED_FIELD	0
-#define STV090x_WIDTH_Px_NOSPLHT_UNNORMED_FIELD	8
-
-#define STV090x_Px_NOSPLHy(__x, __y)		(0xf48f - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_NOSPLH0			STV090x_Px_NOSPLHy(1, 0)
-#define STV090x_P1_NOSPLH1			STV090x_Px_NOSPLHy(1, 1)
-#define STV090x_P2_NOSPLH0			STV090x_Px_NOSPLHy(2, 0)
-#define STV090x_P2_NOSPLH1			STV090x_Px_NOSPLHy(2, 1)
-#define STV090x_OFFST_Px_NOSPLH_UNNORMED_FIELD	0
-#define STV090x_WIDTH_Px_NOSPLH_UNNORMED_FIELD	8
-
-#define STV090x_Px_CAR2CFG(__x)			(0xf490 - (__x - 1) * 0x200)
-#define STV090x_P1_CAR2CFG			STV090x_Px_CAR2CFG(1)
-#define STV090x_P2_CAR2CFG			STV090x_Px_CAR2CFG(2)
-#define STV090x_OFFST_Px_PN4_SELECT_FIELD	6
-#define STV090x_WIDTH_Px_PN4_SELECT_FIELD	1
-#define STV090x_OFFST_Px_CFR2_STOPDVBS1_FIELD	5
-#define STV090x_WIDTH_Px_CFR2_STOPDVBS1_FIELD	1
-#define STV090x_OFFST_Px_ROTA2ON_FIELD		2
-#define STV090x_WIDTH_Px_ROTA2ON_FIELD		1
-#define STV090x_OFFST_Px_PH_DET_ALGO2_FIELD	0
-#define STV090x_WIDTH_Px_PH_DET_ALGO2_FIELD	2
-
-#define STV090x_Px_ACLC2(__x)			(0xf491 - (__x - 1) * 0x200)
-#define STV090x_P1_ACLC2			STV090x_Px_ACLC2(1)
-#define STV090x_P2_ACLC2			STV090x_Px_ACLC2(2)
-#define STV090x_OFFST_Px_CAR2_ALPHA_MANT_FIELD	4
-#define STV090x_WIDTH_Px_CAR2_ALPHA_MANT_FIELD	2
-#define STV090x_OFFST_Px_CAR2_ALPHA_EXP_FIELD	0
-#define STV090x_WIDTH_Px_CAR2_ALPHA_EXP_FIELD	4
-
-#define STV090x_Px_BCLC2(__x)			(0xf492 - (__x - 1) * 0x200)
-#define STV090x_P1_BCLC2			STV090x_Px_BCLC2(1)
-#define STV090x_P2_BCLC2			STV090x_Px_BCLC2(2)
-#define STV090x_OFFST_Px_CAR2_BETA_MANT_FIELD	4
-#define STV090x_WIDTH_Px_CAR2_BETA_MANT_FIELD	2
-#define STV090x_OFFST_Px_CAR2_BETA_EXP_FIELD	0
-#define STV090x_WIDTH_Px_CAR2_BETA_EXP_FIELD	4
-
-#define STV090x_Px_ACLC2S2Q(__x)		(0xf497 - (__x - 1) * 0x200)
-#define STV090x_P1_ACLC2S2Q			STV090x_Px_ACLC2S2Q(1)
-#define STV090x_P2_ACLC2S2Q			STV090x_Px_ACLC2S2Q(2)
-#define STV090x_OFFST_Px_ENAB_SPSKSYMB_FIELD	7
-#define STV090x_WIDTH_Px_ENAB_SPSKSYMB_FIELD	1
-#define STV090x_OFFST_Px_CAR2S2_Q_ALPH_M_FIELD	4
-#define STV090x_WIDTH_Px_CAR2S2_Q_ALPH_M_FIELD	2
-#define STV090x_OFFST_Px_CAR2S2_Q_ALPH_E_FIELD	0
-#define STV090x_WIDTH_Px_CAR2S2_Q_ALPH_E_FIELD	4
-
-#define STV090x_Px_ACLC2S28(__x)		(0xf498 - (__x - 1) * 0x200)
-#define STV090x_P1_ACLC2S28			STV090x_Px_ACLC2S28(1)
-#define STV090x_P2_ACLC2S28			STV090x_Px_ACLC2S28(2)
-#define STV090x_OFFST_Px_CAR2S2_8_ALPH_M_FIELD	4
-#define STV090x_WIDTH_Px_CAR2S2_8_ALPH_M_FIELD	2
-#define STV090x_OFFST_Px_CAR2S2_8_ALPH_E_FIELD	0
-#define STV090x_WIDTH_Px_CAR2S2_8_ALPH_E_FIELD	4
-
-#define STV090x_Px_ACLC2S216A(__x)		(0xf499 - (__x - 1) * 0x200)
-#define STV090x_P1_ACLC2S216A			STV090x_Px_ACLC2S216A(1)
-#define STV090x_P2_ACLC2S216A			STV090x_Px_ACLC2S216A(2)
-#define STV090x_OFFST_Px_CAR2S2_16A_ALPH_M_FIELD	4
-#define STV090x_WIDTH_Px_CAR2S2_16A_ALPH_M_FIELD	2
-#define STV090x_OFFST_Px_CAR2S2_16A_ALPH_E_FIELD	0
-#define STV090x_WIDTH_Px_CAR2S2_16A_ALPH_E_FIELD	4
-
-#define STV090x_Px_ACLC2S232A(__x)		(0xf49A - (__x - 1) * 0x200)
-#define STV090x_P1_ACLC2S232A			STV090x_Px_ACLC2S232A(1)
-#define STV090x_P2_ACLC2S232A			STV090x_Px_ACLC2S232A(2)
-#define STV090x_OFFST_Px_CAR2S2_32A_ALPH_M_FIELD	4
-#define STV090x_WIDTH_Px_CAR2S2_32A_ALPH_M_FIELD	2
-#define STV090x_OFFST_Px_CAR2S2_32A_ALPH_E_FIELD	0
-#define STV090x_WIDTH_Px_CAR2S2_32A_ALPH_E_FIELD	4
-
-#define STV090x_Px_BCLC2S2Q(__x)		(0xf49c - (__x - 1) * 0x200)
-#define STV090x_P1_BCLC2S2Q			STV090x_Px_BCLC2S2Q(1)
-#define STV090x_P2_BCLC2S2Q			STV090x_Px_BCLC2S2Q(2)
-#define STV090x_OFFST_Px_CAR2S2_Q_BETA_M_FIELD	4
-#define STV090x_WIDTH_Px_CAR2S2_Q_BETA_M_FIELD	2
-#define STV090x_OFFST_Px_CAR2S2_Q_BETA_E_FIELD	0
-#define STV090x_WIDTH_Px_CAR2S2_Q_BETA_E_FIELD	4
-
-#define STV090x_Px_BCLC2S28(__x)		(0xf49d - (__x - 1) * 0x200)
-#define STV090x_P1_BCLC2S28			STV090x_Px_BCLC2S28(1)
-#define STV090x_P2_BCLC2S28			STV090x_Px_BCLC2S28(2)
-#define STV090x_OFFST_Px_CAR2S2_8_BETA_M_FIELD	4
-#define STV090x_WIDTH_Px_CAR2S2_8_BETA_M_FIELD	2
-#define STV090x_OFFST_Px_CAR2S2_8_BETA_E_FIELD	0
-#define STV090x_WIDTH_Px_CAR2S2_8_BETA_E_FIELD	4
-
-#define STV090x_Px_BCLC2S216A(__x)		(0xf49e - (__x - 1) * 0x200)
-#define STV090x_P1_BCLC2S216A			STV090x_Px_BCLC2S216A(1)
-#define STV090x_P2_BCLC2S216A			STV090x_Px_BCLC2S216A(2)
-#define STV090x_OFFST_Px_CAR2S2_16A_BETA_M_FIELD	4
-#define STV090x_WIDTH_Px_CAR2S2_16A_BETA_M_FIELD	2
-#define STV090x_OFFST_Px_CAR2S2_16A_BETA_E_FIELD	0
-#define STV090x_WIDTH_Px_CAR2S2_16A_BETA_E_FIELD	4
-
-#define STV090x_Px_BCLC2S232A(__x)		(0xf49f - (__x - 1) * 0x200)
-#define STV090x_P1_BCLC2S232A			STV090x_Px_BCLC2S232A(1)
-#define STV090x_P2_BCLC2S232A			STV090x_Px_BCLC2S232A(2)
-#define STV090x_OFFST_Px_CAR2S2_32A_BETA_M_FIELD	4
-#define STV090x_WIDTH_Px_CAR2S2_32A_BETA_M_FIELD	2
-#define STV090x_OFFST_Px_CAR2S2_32A_BETA_E_FIELD	0
-#define STV090x_WIDTH_Px_CAR2S2_32A_BETA_E_FIELD	4
-
-#define STV090x_Px_PLROOT2(__x)			(0xf4ac - (__x - 1) * 0x200)
-#define STV090x_P1_PLROOT2			STV090x_Px_PLROOT2(1)
-#define STV090x_P2_PLROOT2			STV090x_Px_PLROOT2(2)
-#define STV090x_OFFST_Px_PLSCRAMB_MODE_FIELD	2
-#define STV090x_WIDTH_Px_PLSCRAMB_MODE_FIELD	2
-#define STV090x_OFFST_Px_PLSCRAMB_ROOT_FIELD	0
-#define STV090x_WIDTH_Px_PLSCRAMB_ROOT_FIELD	2
-
-#define STV090x_Px_PLROOT1(__x)			(0xf4ad - (__x - 1) * 0x200)
-#define STV090x_P1_PLROOT1			STV090x_Px_PLROOT1(1)
-#define STV090x_P2_PLROOT1			STV090x_Px_PLROOT1(2)
-#define STV090x_OFFST_Px_PLSCRAMB_ROOT1_FIELD	0
-#define STV090x_WIDTH_Px_PLSCRAMB_ROOT1_FIELD	8
-
-#define STV090x_Px_PLROOT0(__x)			(0xf4ae - (__x - 1) * 0x200)
-#define STV090x_P1_PLROOT0			STV090x_Px_PLROOT0(1)
-#define STV090x_P2_PLROOT0			STV090x_Px_PLROOT0(2)
-#define STV090x_OFFST_Px_PLSCRAMB_ROOT0_FIELD	0
-#define STV090x_WIDTH_Px_PLSCRAMB_ROOT0_FIELD	8
-
-#define STV090x_Px_MODCODLST0(__x)		(0xf4b0 - (__x - 1) * 0x200) /* check */
-#define STV090x_P1_MODCODLST0			STV090x_Px_MODCODLST0(1)
-#define STV090x_P2_MODCODLST0			STV090x_Px_MODCODLST0(2)
-
-#define STV090x_Px_MODCODLST1(__x)		(0xf4b1 - (__x - 1) * 0x200)
-#define STV090x_P1_MODCODLST1			STV090x_Px_MODCODLST1(1)
-#define STV090x_P2_MODCODLST1			STV090x_Px_MODCODLST1(2)
-#define STV090x_OFFST_Px_DIS_MODCOD29_FIELD	4
-#define STV090x_WIDTH_Px_DIS_MODCOD29_FIELD	4
-#define STV090x_OFFST_Px_DIS_32PSK_9_10_FIELD	0
-#define STV090x_WIDTH_Px_DIS_32PSK_9_10_FIELD	4
-
-#define STV090x_Px_MODCODLST2(__x)		(0xf4b2 - (__x - 1) * 0x200)
-#define STV090x_P1_MODCODLST2			STV090x_Px_MODCODLST2(1)
-#define STV090x_P2_MODCODLST2			STV090x_Px_MODCODLST2(2)
-#define STV090x_OFFST_Px_DIS_32PSK_8_9_FIELD	4
-#define STV090x_WIDTH_Px_DIS_32PSK_8_9_FIELD	4
-#define STV090x_OFFST_Px_DIS_32PSK_5_6_FIELD	0
-#define STV090x_WIDTH_Px_DIS_32PSK_5_6_FIELD	4
-
-#define STV090x_Px_MODCODLST3(__x)		(0xf4b3 - (__x - 1) * 0x200)
-#define STV090x_P1_MODCODLST3			STV090x_Px_MODCODLST3(1)
-#define STV090x_P2_MODCODLST3			STV090x_Px_MODCODLST3(2)
-#define STV090x_OFFST_Px_DIS_32PSK_4_5_FIELD	4
-#define STV090x_WIDTH_Px_DIS_32PSK_4_5_FIELD	4
-#define STV090x_OFFST_Px_DIS_32PSK_3_4_FIELD	0
-#define STV090x_WIDTH_Px_DIS_32PSK_3_4_FIELD	4
-
-#define STV090x_Px_MODCODLST4(__x)		(0xf4b4 - (__x - 1) * 0x200)
-#define STV090x_P1_MODCODLST4			STV090x_Px_MODCODLST4(1)
-#define STV090x_P2_MODCODLST4			STV090x_Px_MODCODLST4(2)
-#define STV090x_OFFST_Px_DIS_16PSK_9_10_FIELD	4
-#define STV090x_WIDTH_Px_DIS_16PSK_9_10_FIELD	4
-#define STV090x_OFFST_Px_DIS_16PSK_8_9_FIELD	0
-#define STV090x_WIDTH_Px_DIS_16PSK_8_9_FIELD	4
-
-#define STV090x_Px_MODCODLST5(__x)		(0xf4b5 - (__x - 1) * 0x200)
-#define STV090x_P1_MODCODLST5			STV090x_Px_MODCODLST5(1)
-#define STV090x_P2_MODCODLST5			STV090x_Px_MODCODLST5(2)
-#define STV090x_OFFST_Px_DIS_16PSK_5_6_FIELD	4
-#define STV090x_WIDTH_Px_DIS_16PSK_5_6_FIELD	4
-#define STV090x_OFFST_Px_DIS_16PSK_4_5_FIELD	0
-#define STV090x_WIDTH_Px_DIS_16PSK_4_5_FIELD	4
-
-#define STV090x_Px_MODCODLST6(__x)		(0xf4b6 - (__x - 1) * 0x200)
-#define STV090x_P1_MODCODLST6			STV090x_Px_MODCODLST6(1)
-#define STV090x_P2_MODCODLST6			STV090x_Px_MODCODLST6(2)
-#define STV090x_OFFST_Px_DIS_16PSK_3_4_FIELD	4
-#define STV090x_WIDTH_Px_DIS_16PSK_3_4_FIELD	4
-#define STV090x_OFFST_Px_DIS_16PSK_2_3_FIELD	0
-#define STV090x_WIDTH_Px_DIS_16PSK_2_3_FIELD	4
-
-#define STV090x_Px_MODCODLST7(__x)		(0xf4b7 - (__x - 1) * 0x200)
-#define STV090x_P1_MODCODLST7			STV090x_Px_MODCODLST7(1)
-#define STV090x_P2_MODCODLST7			STV090x_Px_MODCODLST7(2)
-#define STV090x_OFFST_Px_DIS_8P_9_10_FIELD	4
-#define STV090x_WIDTH_Px_DIS_8P_9_10_FIELD	4
-#define STV090x_OFFST_Px_DIS_8P_8_9_FIELD	0
-#define STV090x_WIDTH_Px_DIS_8P_8_9_FIELD	4
-
-#define STV090x_Px_MODCODLST8(__x)		(0xf4b8 - (__x - 1) * 0x200)
-#define STV090x_P1_MODCODLST8			STV090x_Px_MODCODLST8(1)
-#define STV090x_P2_MODCODLST8			STV090x_Px_MODCODLST8(2)
-#define STV090x_OFFST_Px_DIS_8P_5_6_FIELD	4
-#define STV090x_WIDTH_Px_DIS_8P_5_6_FIELD	4
-#define STV090x_OFFST_Px_DIS_8P_3_4_FIELD	0
-#define STV090x_WIDTH_Px_DIS_8P_3_4_FIELD	4
-
-#define STV090x_Px_MODCODLST9(__x)		(0xf4b9 - (__x - 1) * 0x200)
-#define STV090x_P1_MODCODLST9			STV090x_Px_MODCODLST9(1)
-#define STV090x_P2_MODCODLST9			STV090x_Px_MODCODLST9(2)
-#define STV090x_OFFST_Px_DIS_8P_2_3_FIELD	4
-#define STV090x_WIDTH_Px_DIS_8P_2_3_FIELD	4
-#define STV090x_OFFST_Px_DIS_8P_3_5_FIELD	0
-#define STV090x_WIDTH_Px_DIS_8P_3_5_FIELD	4
-
-#define STV090x_Px_MODCODLSTA(__x)		(0xf4ba - (__x - 1) * 0x200)
-#define STV090x_P1_MODCODLSTA			STV090x_Px_MODCODLSTA(1)
-#define STV090x_P2_MODCODLSTA			STV090x_Px_MODCODLSTA(2)
-#define STV090x_OFFST_Px_DIS_QP_9_10_FIELD	4
-#define STV090x_WIDTH_Px_DIS_QP_9_10_FIELD	4
-#define STV090x_OFFST_Px_DIS_QP_8_9_FIELD	0
-#define STV090x_WIDTH_Px_DIS_QP_8_9_FIELD	4
-
-#define STV090x_Px_MODCODLSTB(__x)		(0xf4bb - (__x - 1) * 0x200)
-#define STV090x_P1_MODCODLSTB			STV090x_Px_MODCODLSTB(1)
-#define STV090x_P2_MODCODLSTB			STV090x_Px_MODCODLSTB(2)
-#define STV090x_OFFST_Px_DIS_QP_5_6_FIELD	4
-#define STV090x_WIDTH_Px_DIS_QP_5_6_FIELD	4
-#define STV090x_OFFST_Px_DIS_QP_4_5_FIELD	0
-#define STV090x_WIDTH_Px_DIS_QP_4_5_FIELD	4
-
-#define STV090x_Px_MODCODLSTC(__x)		(0xf4bc - (__x - 1) * 0x200)
-#define STV090x_P1_MODCODLSTC			STV090x_Px_MODCODLSTC(1)
-#define STV090x_P2_MODCODLSTC			STV090x_Px_MODCODLSTC(2)
-#define STV090x_OFFST_Px_DIS_QP_3_4_FIELD	4
-#define STV090x_WIDTH_Px_DIS_QP_3_4_FIELD	4
-#define STV090x_OFFST_Px_DIS_QP_2_3_FIELD	0
-#define STV090x_WIDTH_Px_DIS_QP_2_3_FIELD	4
-
-#define STV090x_Px_MODCODLSTD(__x)		(0xf4bd - (__x - 1) * 0x200)
-#define STV090x_P1_MODCODLSTD			STV090x_Px_MODCODLSTD(1)
-#define STV090x_P2_MODCODLSTD			STV090x_Px_MODCODLSTD(2)
-#define STV090x_OFFST_Px_DIS_QP_3_5_FIELD	4
-#define STV090x_WIDTH_Px_DIS_QP_3_5_FIELD	4
-#define STV090x_OFFST_Px_DIS_QP_1_2_FIELD	0
-#define STV090x_WIDTH_Px_DIS_QP_1_2_FIELD	4
-
-#define STV090x_Px_MODCODLSTE(__x)		(0xf4be - (__x - 1) * 0x200)
-#define STV090x_P1_MODCODLSTE			STV090x_Px_MODCODLSTE(1)
-#define STV090x_P2_MODCODLSTE			STV090x_Px_MODCODLSTE(2)
-#define STV090x_OFFST_Px_DIS_QP_2_5_FIELD	4
-#define STV090x_WIDTH_Px_DIS_QP_2_5_FIELD	4
-#define STV090x_OFFST_Px_DIS_QP_1_3_FIELD	0
-#define STV090x_WIDTH_Px_DIS_QP_1_3_FIELD	4
-
-#define STV090x_Px_MODCODLSTF(__x)		(0xf4bf - (__x - 1) * 0x200)
-#define STV090x_P1_MODCODLSTF			STV090x_Px_MODCODLSTF(1)
-#define STV090x_P2_MODCODLSTF			STV090x_Px_MODCODLSTF(2)
-#define STV090x_OFFST_Px_DIS_QP_1_4_FIELD	4
-#define STV090x_WIDTH_Px_DIS_QP_1_4_FIELD	4
-
-#define STV090x_Px_GAUSSR0(__x)			(0xf4c0 - (__x - 1) * 0x200)
-#define STV090x_P1_GAUSSR0			STV090x_Px_GAUSSR0(1)
-#define STV090x_P2_GAUSSR0			STV090x_Px_GAUSSR0(2)
-#define STV090x_OFFST_Px_EN_CCIMODE_FIELD	7
-#define STV090x_WIDTH_Px_EN_CCIMODE_FIELD	1
-#define STV090x_OFFST_Px_R0_GAUSSIEN_FIELD	0
-#define STV090x_WIDTH_Px_R0_GAUSSIEN_FIELD	7
-
-#define STV090x_Px_CCIR0(__x)			(0xf4c1 - (__x - 1) * 0x200)
-#define STV090x_P1_CCIR0			STV090x_Px_CCIR0(1)
-#define STV090x_P2_CCIR0			STV090x_Px_CCIR0(2)
-#define STV090x_OFFST_Px_CCIDETECT_PLH_FIELD	7
-#define STV090x_WIDTH_Px_CCIDETECT_PLH_FIELD	1
-#define STV090x_OFFST_Px_R0_CCI_FIELD		0
-#define STV090x_WIDTH_Px_R0_CCI_FIELD		7
-
-#define STV090x_Px_CCIQUANT(__x)		(0xf4c2 - (__x - 1) * 0x200)
-#define STV090x_P1_CCIQUANT			STV090x_Px_CCIQUANT(1)
-#define STV090x_P2_CCIQUANT			STV090x_Px_CCIQUANT(2)
-#define STV090x_OFFST_Px_CCI_BETA_FIELD		5
-#define STV090x_WIDTH_Px_CCI_BETA_FIELD		3
-#define STV090x_OFFST_Px_CCI_QUANT_FIELD	0
-#define STV090x_WIDTH_Px_CCI_QUANT_FIELD	5
-
-#define STV090x_Px_CCITHRESH(__x)		(0xf4c3 - (__x - 1) * 0x200)
-#define STV090x_P1_CCITHRESH			STV090x_Px_CCITHRESH(1)
-#define STV090x_P2_CCITHRESH			STV090x_Px_CCITHRESH(2)
-#define STV090x_OFFST_Px_CCI_THRESHOLD_FIELD	0
-#define STV090x_WIDTH_Px_CCI_THRESHOLD_FIELD	8
-
-#define STV090x_Px_CCIACC(__x)			(0xf4c4 - (__x - 1) * 0x200)
-#define STV090x_P1_CCIACC			STV090x_Px_CCIACC(1)
-#define STV090x_P2_CCIACC			STV090x_Px_CCIACC(2)
-#define STV090x_OFFST_Px_CCI_VALUE_FIELD	0
-#define STV090x_WIDTH_Px_CCI_VALUE_FIELD	8
-
-#define STV090x_Px_DMDRESCFG(__x)		(0xF4C6 - (__x - 1) * 0x200)
-#define STV090x_P1_DMDRESCFG			STV090x_Px_DMDRESCFG(1)
-#define STV090x_P2_DMDRESCFG			STV090x_Px_DMDRESCFG(2)
-#define STV090x_OFFST_Px_DMDRES_RESET_FIELD	7
-#define STV090x_WIDTH_Px_DMDRES_RESET_FIELD	1
-
-#define STV090x_Px_DMDRESADR(__x)		(0xF4C7 - (__x - 1) * 0x200)
-#define STV090x_P1_DMDRESADR			STV090x_Px_DMDRESADR(1)
-#define STV090x_P2_DMDRESADR			STV090x_Px_DMDRESADR(2)
-#define STV090x_OFFST_Px_DMDRES_RESNBR_FIELD	0
-#define STV090x_WIDTH_Px_DMDRES_RESNBR_FIELD	4
-
-#define STV090x_Px_DMDRESDATAy(__x, __y)	(0xF4C8 - (__x - 1) * 0x200 + (7 - __y))
-#define STV090x_P1_DMDRESDATA0			STV090x_Px_DMDRESDATAy(1, 0)
-#define STV090x_P1_DMDRESDATA1			STV090x_Px_DMDRESDATAy(1, 1)
-#define STV090x_P1_DMDRESDATA2			STV090x_Px_DMDRESDATAy(1, 2)
-#define STV090x_P1_DMDRESDATA3			STV090x_Px_DMDRESDATAy(1, 3)
-#define STV090x_P1_DMDRESDATA4			STV090x_Px_DMDRESDATAy(1, 4)
-#define STV090x_P1_DMDRESDATA5			STV090x_Px_DMDRESDATAy(1, 5)
-#define STV090x_P1_DMDRESDATA6			STV090x_Px_DMDRESDATAy(1, 6)
-#define STV090x_P1_DMDRESDATA7			STV090x_Px_DMDRESDATAy(1, 7)
-#define STV090x_P2_DMDRESDATA0			STV090x_Px_DMDRESDATAy(2, 0)
-#define STV090x_P2_DMDRESDATA1			STV090x_Px_DMDRESDATAy(2, 1)
-#define STV090x_P2_DMDRESDATA2			STV090x_Px_DMDRESDATAy(2, 2)
-#define STV090x_P2_DMDRESDATA3			STV090x_Px_DMDRESDATAy(2, 3)
-#define STV090x_P2_DMDRESDATA4			STV090x_Px_DMDRESDATAy(2, 4)
-#define STV090x_P2_DMDRESDATA5			STV090x_Px_DMDRESDATAy(2, 5)
-#define STV090x_P2_DMDRESDATA6			STV090x_Px_DMDRESDATAy(2, 6)
-#define STV090x_P2_DMDRESDATA7			STV090x_Px_DMDRESDATAy(2, 7)
-#define STV090x_OFFST_Px_DMDRES_DATA_FIELD	0
-#define STV090x_WIDTH_Px_DMDRES_DATA_FIELD	8
-
-#define STV090x_Px_FFEIy(__x, __y)		(0xf4d0 - (__x - 1) * 0x200 + 0x2 * (__y - 1))
-#define STV090x_P1_FFEI1			STV090x_Px_FFEIy(1, 1)
-#define STV090x_P1_FFEI2			STV090x_Px_FFEIy(1, 2)
-#define STV090x_P1_FFEI3			STV090x_Px_FFEIy(1, 3)
-#define STV090x_P1_FFEI4			STV090x_Px_FFEIy(1, 4)
-#define STV090x_P2_FFEI1			STV090x_Px_FFEIy(2, 1)
-#define STV090x_P2_FFEI2			STV090x_Px_FFEIy(2, 2)
-#define STV090x_P2_FFEI3			STV090x_Px_FFEIy(2, 3)
-#define STV090x_P2_FFEI4			STV090x_Px_FFEIy(2, 4)
-#define STV090x_OFFST_Px_FFE_ACCIy_FIELD	0
-#define STV090x_WIDTH_Px_FFE_ACCIy_FIELD	8
-
-#define STV090x_Px_FFEQy(__x, __y)		(0xf4d1 - (__x - 1) * 0x200 + 0x2 * (__y - 1))
-#define STV090x_P1_FFEQ1			STV090x_Px_FFEQy(1, 1)
-#define STV090x_P1_FFEQ2			STV090x_Px_FFEQy(1, 2)
-#define STV090x_P1_FFEQ3			STV090x_Px_FFEQy(1, 3)
-#define STV090x_P1_FFEQ4			STV090x_Px_FFEQy(1, 4)
-#define STV090x_P2_FFEQ1			STV090x_Px_FFEQy(2, 1)
-#define STV090x_P2_FFEQ2			STV090x_Px_FFEQy(2, 2)
-#define STV090x_P2_FFEQ3			STV090x_Px_FFEQy(2, 3)
-#define STV090x_P2_FFEQ4			STV090x_Px_FFEQy(2, 4)
-#define STV090x_OFFST_Px_FFE_ACCQy_FIELD	0
-#define STV090x_WIDTH_Px_FFE_ACCQy_FIELD	8
-
-#define STV090x_Px_FFECFG(__x)			(0xf4d8 - (__x - 1) * 0x200)
-#define STV090x_P1_FFECFG			STV090x_Px_FFECFG(1)
-#define STV090x_P2_FFECFG			STV090x_Px_FFECFG(2)
-#define STV090x_OFFST_Px_EQUALFFE_ON_FIELD	6
-#define STV090x_WIDTH_Px_EQUALFFE_ON_FIELD	1
-
-#define STV090x_Px_SMAPCOEF7(__x)		(0xf500 - (__x - 1) * 0x200)
-#define STV090x_P1_SMAPCOEF7			STV090x_Px_SMAPCOEF7(1)
-#define STV090x_P2_SMAPCOEF7			STV090x_Px_SMAPCOEF7(2)
-#define STV090x_OFFST_Px_DIS_QSCALE_FIELD	7
-#define STV090x_WIDTH_Px_DIS_QSCALE_FIELD	1
-#define STV090x_OFFST_Px_SMAPCOEF_Q_LLR12_FIELD	0
-#define STV090x_WIDTH_Px_SMAPCOEF_Q_LLR12_FIELD	7
-
-#define STV090x_Px_SMAPCOEF6(__x)		(0xf501 - (__x - 1) * 0x200)
-#define STV090x_P1_SMAPCOEF6			STV090x_Px_SMAPCOEF6(1)
-#define STV090x_P2_SMAPCOEF6			STV090x_Px_SMAPCOEF6(2)
-#define STV090x_OFFST_Px_ADJ_8PSKLLR1_FIELD	2
-#define STV090x_WIDTH_Px_ADJ_8PSKLLR1_FIELD	1
-#define STV090x_OFFST_Px_OLD_8PSKLLR1_FIELD	1
-#define STV090x_WIDTH_Px_OLD_8PSKLLR1_FIELD	1
-#define STV090x_OFFST_Px_DIS_AB8PSK_FIELD	0
-#define STV090x_WIDTH_Px_DIS_AB8PSK_FIELD	1
-
-#define STV090x_Px_SMAPCOEF5(__x)			(0xf502 - (__x - 1) * 0x200)
-#define STV090x_P1_SMAPCOEF5				STV090x_Px_SMAPCOEF5(1)
-#define STV090x_P2_SMAPCOEF5				STV090x_Px_SMAPCOEF5(2)
-#define STV090x_OFFST_Px_DIS_8SCALE_FIELD		7
-#define STV090x_WIDTH_Px_DIS_8SCALE_FIELD		1
-#define STV090x_OFFST_Px_SMAPCOEF_8P_LLR23_FIELD	0
-#define STV090x_WIDTH_Px_SMAPCOEF_8P_LLR23_FIELD	7
-
-#define STV090x_Px_DMDPLHSTAT(__x)		(0xF520 - (__x - 1) * 0x200)
-#define STV090x_P1_DMDPLHSTAT			STV090x_Px_DMDPLHSTAT(1)
-#define STV090x_P2_DMDPLHSTAT			STV090x_Px_DMDPLHSTAT(2)
-#define STV090x_OFFST_Px_PLH_STATISTIC_FIELD	0
-#define STV090x_WIDTH_Px_PLH_STATISTIC_FIELD	8
-
-#define STV090x_Px_LOCKTIMEy(__x, __y)		(0xF525 - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_LOCKTIME0			STV090x_Px_LOCKTIMEy(1, 0)
-#define STV090x_P1_LOCKTIME1			STV090x_Px_LOCKTIMEy(1, 1)
-#define STV090x_P1_LOCKTIME2			STV090x_Px_LOCKTIMEy(1, 2)
-#define STV090x_P1_LOCKTIME3			STV090x_Px_LOCKTIMEy(1, 3)
-#define STV090x_P2_LOCKTIME0			STV090x_Px_LOCKTIMEy(2, 0)
-#define STV090x_P2_LOCKTIME1			STV090x_Px_LOCKTIMEy(2, 1)
-#define STV090x_P2_LOCKTIME2			STV090x_Px_LOCKTIMEy(2, 2)
-#define STV090x_P2_LOCKTIME3			STV090x_Px_LOCKTIMEy(2, 3)
-#define STV090x_OFFST_Px_DEMOD_LOCKTIME_FIELD	0
-#define STV090x_WIDTH_Px_DEMOD_LOCKTIME_FIELD	8
-
-#define STV090x_Px_TNRCFG(__x)			(0xf4e0 - (__x - 1) * 0x200) /* check */
-#define STV090x_P1_TNRCFG			STV090x_Px_TNRCFG(1)
-#define STV090x_P2_TNRCFG			STV090x_Px_TNRCFG(2)
-
-#define STV090x_Px_TNRCFG2(__x)			(0xf4e1 - (__x - 1) * 0x200)
-#define STV090x_P1_TNRCFG2			STV090x_Px_TNRCFG2(1)
-#define STV090x_P2_TNRCFG2			STV090x_Px_TNRCFG2(2)
-#define STV090x_OFFST_Px_TUN_IQSWAP_FIELD	7
-#define STV090x_WIDTH_Px_TUN_IQSWAP_FIELD	1
-
-#define STV090x_Px_VITSCALE(__x)		(0xf532 - (__x - 1) * 0x200)
-#define STV090x_P1_VITSCALE			STV090x_Px_VITSCALE(1)
-#define STV090x_P2_VITSCALE			STV090x_Px_VITSCALE(2)
-#define STV090x_OFFST_Px_NVTH_NOSRANGE_FIELD	7
-#define STV090x_WIDTH_Px_NVTH_NOSRANGE_FIELD	1
-#define STV090x_OFFST_Px_VERROR_MAXMODE_FIELD	6
-#define STV090x_WIDTH_Px_VERROR_MAXMODE_FIELD	1
-#define STV090x_OFFST_Px_NSLOWSN_LOCKED_FIELD	3
-#define STV090x_WIDTH_Px_NSLOWSN_LOCKED_FIELD	1
-#define STV090x_OFFST_Px_DIS_RSFLOCK_FIELD	1
-#define STV090x_WIDTH_Px_DIS_RSFLOCK_FIELD	1
-
-#define STV090x_Px_FECM(__x)			(0xf533 - (__x - 1) * 0x200)
-#define STV090x_P1_FECM				STV090x_Px_FECM(1)
-#define STV090x_P2_FECM				STV090x_Px_FECM(2)
-#define STV090x_OFFST_Px_DSS_DVB_FIELD		7
-#define STV090x_WIDTH_Px_DSS_DVB_FIELD		1
-#define STV090x_OFFST_Px_DSS_SRCH_FIELD		4
-#define STV090x_WIDTH_Px_DSS_SRCH_FIELD		1
-#define STV090x_OFFST_Px_SYNCVIT_FIELD		1
-#define STV090x_WIDTH_Px_SYNCVIT_FIELD		1
-#define STV090x_OFFST_Px_IQINV_FIELD		0
-#define STV090x_WIDTH_Px_IQINV_FIELD		1
-
-#define STV090x_Px_VTH12(__x)			(0xf534 - (__x - 1) * 0x200)
-#define STV090x_P1_VTH12			STV090x_Px_VTH12(1)
-#define STV090x_P2_VTH12			STV090x_Px_VTH12(2)
-#define STV090x_OFFST_Px_VTH12_FIELD		0
-#define STV090x_WIDTH_Px_VTH12_FIELD		8
-
-#define STV090x_Px_VTH23(__x)			(0xf535 - (__x - 1) * 0x200)
-#define STV090x_P1_VTH23			STV090x_Px_VTH23(1)
-#define STV090x_P2_VTH23			STV090x_Px_VTH23(2)
-#define STV090x_OFFST_Px_VTH23_FIELD		0
-#define STV090x_WIDTH_Px_VTH23_FIELD		8
-
-#define STV090x_Px_VTH34(__x)			(0xf536 - (__x - 1) * 0x200)
-#define STV090x_P1_VTH34			STV090x_Px_VTH34(1)
-#define STV090x_P2_VTH34			STV090x_Px_VTH34(2)
-#define STV090x_OFFST_Px_VTH34_FIELD		0
-#define STV090x_WIDTH_Px_VTH34_FIELD		8
-
-#define STV090x_Px_VTH56(__x)			(0xf537 - (__x - 1) * 0x200)
-#define STV090x_P1_VTH56			STV090x_Px_VTH56(1)
-#define STV090x_P2_VTH56			STV090x_Px_VTH56(2)
-#define STV090x_OFFST_Px_VTH56_FIELD		0
-#define STV090x_WIDTH_Px_VTH56_FIELD		8
-
-#define STV090x_Px_VTH67(__x)			(0xf538 - (__x - 1) * 0x200)
-#define STV090x_P1_VTH67			STV090x_Px_VTH67(1)
-#define STV090x_P2_VTH67			STV090x_Px_VTH67(2)
-#define STV090x_OFFST_Px_VTH67_FIELD		0
-#define STV090x_WIDTH_Px_VTH67_FIELD		8
-
-#define STV090x_Px_VTH78(__x)			(0xf539 - (__x - 1) * 0x200)
-#define STV090x_P1_VTH78			STV090x_Px_VTH78(1)
-#define STV090x_P2_VTH78			STV090x_Px_VTH78(2)
-#define STV090x_OFFST_Px_VTH78_FIELD		0
-#define STV090x_WIDTH_Px_VTH78_FIELD		8
-
-#define STV090x_Px_VITCURPUN(__x)		(0xf53a - (__x - 1) * 0x200)
-#define STV090x_P1_VITCURPUN			STV090x_Px_VITCURPUN(1)
-#define STV090x_P2_VITCURPUN			STV090x_Px_VITCURPUN(2)
-#define STV090x_OFFST_Px_VIT_CURPUN_FIELD	0
-#define STV090x_WIDTH_Px_VIT_CURPUN_FIELD	5
-
-#define STV090x_Px_VERROR(__x)			(0xf53b - (__x - 1) * 0x200)
-#define STV090x_P1_VERROR			STV090x_Px_VERROR(1)
-#define STV090x_P2_VERROR			STV090x_Px_VERROR(2)
-#define STV090x_OFFST_Px_REGERR_VIT_FIELD	0
-#define STV090x_WIDTH_Px_REGERR_VIT_FIELD	8
-
-#define STV090x_Px_PRVIT(__x)			(0xf53c - (__x - 1) * 0x200)
-#define STV090x_P1_PRVIT			STV090x_Px_PRVIT(1)
-#define STV090x_P2_PRVIT			STV090x_Px_PRVIT(2)
-#define STV090x_OFFST_Px_DIS_VTHLOCK_FIELD	6
-#define STV090x_WIDTH_Px_DIS_VTHLOCK_FIELD	1
-#define STV090x_OFFST_Px_E7_8VIT_FIELD		5
-#define STV090x_WIDTH_Px_E7_8VIT_FIELD		1
-#define STV090x_OFFST_Px_E6_7VIT_FIELD		4
-#define STV090x_WIDTH_Px_E6_7VIT_FIELD		1
-#define STV090x_OFFST_Px_E5_6VIT_FIELD		3
-#define STV090x_WIDTH_Px_E5_6VIT_FIELD		1
-#define STV090x_OFFST_Px_E3_4VIT_FIELD		2
-#define STV090x_WIDTH_Px_E3_4VIT_FIELD		1
-#define STV090x_OFFST_Px_E2_3VIT_FIELD		1
-#define STV090x_WIDTH_Px_E2_3VIT_FIELD		1
-#define STV090x_OFFST_Px_E1_2VIT_FIELD		0
-#define STV090x_WIDTH_Px_E1_2VIT_FIELD		1
-
-#define STV090x_Px_VAVSRVIT(__x)		(0xf53d - (__x - 1) * 0x200)
-#define STV090x_P1_VAVSRVIT			STV090x_Px_VAVSRVIT(1)
-#define STV090x_P2_VAVSRVIT			STV090x_Px_VAVSRVIT(2)
-#define STV090x_OFFST_Px_SNVIT_FIELD		4
-#define STV090x_WIDTH_Px_SNVIT_FIELD		2
-#define STV090x_OFFST_Px_TOVVIT_FIELD		2
-#define STV090x_WIDTH_Px_TOVVIT_FIELD		2
-#define STV090x_OFFST_Px_HYPVIT_FIELD		0
-#define STV090x_WIDTH_Px_HYPVIT_FIELD		2
-
-#define STV090x_Px_VSTATUSVIT(__x)		(0xf53e - (__x - 1) * 0x200)
-#define STV090x_P1_VSTATUSVIT			STV090x_Px_VSTATUSVIT(1)
-#define STV090x_P2_VSTATUSVIT			STV090x_Px_VSTATUSVIT(2)
-#define STV090x_OFFST_Px_PRFVIT_FIELD		4
-#define STV090x_WIDTH_Px_PRFVIT_FIELD		1
-#define STV090x_OFFST_Px_LOCKEDVIT_FIELD	3
-#define STV090x_WIDTH_Px_LOCKEDVIT_FIELD	1
-
-#define STV090x_Px_VTHINUSE(__x)		(0xf53f - (__x - 1) * 0x200)
-#define STV090x_P1_VTHINUSE			STV090x_Px_VTHINUSE(1)
-#define STV090x_P2_VTHINUSE			STV090x_Px_VTHINUSE(2)
-#define STV090x_OFFST_Px_VIT_INUSE_FIELD	0
-#define STV090x_WIDTH_Px_VIT_INUSE_FIELD	8
-
-#define STV090x_Px_KDIV12(__x)			(0xf540 - (__x - 1) * 0x200)
-#define STV090x_P1_KDIV12			STV090x_Px_KDIV12(1)
-#define STV090x_P2_KDIV12			STV090x_Px_KDIV12(2)
-#define STV090x_OFFST_Px_K_DIVIDER_12_FIELD	0
-#define STV090x_WIDTH_Px_K_DIVIDER_12_FIELD	7
-
-#define STV090x_Px_KDIV23(__x)			(0xf541 - (__x - 1) * 0x200)
-#define STV090x_P1_KDIV23			STV090x_Px_KDIV23(1)
-#define STV090x_P2_KDIV23			STV090x_Px_KDIV23(2)
-#define STV090x_OFFST_Px_K_DIVIDER_23_FIELD	0
-#define STV090x_WIDTH_Px_K_DIVIDER_23_FIELD	7
-
-#define STV090x_Px_KDIV34(__x)			(0xf542 - (__x - 1) * 0x200)
-#define STV090x_P1_KDIV34			STV090x_Px_KDIV34(1)
-#define STV090x_P2_KDIV34			STV090x_Px_KDIV34(2)
-#define STV090x_OFFST_Px_K_DIVIDER_34_FIELD	0
-#define STV090x_WIDTH_Px_K_DIVIDER_34_FIELD	7
-
-#define STV090x_Px_KDIV56(__x)			(0xf543 - (__x - 1) * 0x200)
-#define STV090x_P1_KDIV56			STV090x_Px_KDIV56(1)
-#define STV090x_P2_KDIV56			STV090x_Px_KDIV56(2)
-#define STV090x_OFFST_Px_K_DIVIDER_56_FIELD	0
-#define STV090x_WIDTH_Px_K_DIVIDER_56_FIELD	7
-
-#define STV090x_Px_KDIV67(__x)			(0xf544 - (__x - 1) * 0x200)
-#define STV090x_P1_KDIV67			STV090x_Px_KDIV67(1)
-#define STV090x_P2_KDIV67			STV090x_Px_KDIV67(2)
-#define STV090x_OFFST_Px_K_DIVIDER_67_FIELD	0
-#define STV090x_WIDTH_Px_K_DIVIDER_67_FIELD	7
-
-#define STV090x_Px_KDIV78(__x)			(0xf545 - (__x - 1) * 0x200)
-#define STV090x_P1_KDIV78			STV090x_Px_KDIV78(1)
-#define STV090x_P2_KDIV78			STV090x_Px_KDIV78(2)
-#define STV090x_OFFST_Px_K_DIVIDER_78_FIELD	0
-#define STV090x_WIDTH_Px_K_DIVIDER_78_FIELD	7
-
-#define STV090x_Px_PDELCTRL1(__x)		(0xf550 - (__x - 1) * 0x200)
-#define STV090x_P1_PDELCTRL1			STV090x_Px_PDELCTRL1(1)
-#define STV090x_P2_PDELCTRL1			STV090x_Px_PDELCTRL1(2)
-#define STV090x_OFFST_Px_INV_MISMASK_FIELD	7
-#define STV090x_WIDTH_Px_INV_MISMASK_FIELD	1
-#define STV090x_OFFST_Px_FILTER_EN_FIELD	5
-#define STV090x_WIDTH_Px_FILTER_EN_FIELD	1
-#define STV090x_OFFST_Px_EN_MIS00_FIELD		1
-#define STV090x_WIDTH_Px_EN_MIS00_FIELD		1
-#define STV090x_OFFST_Px_ALGOSWRST_FIELD	0
-#define STV090x_WIDTH_Px_ALGOSWRST_FIELD	1
-
-#define STV090x_Px_PDELCTRL2(__x)		(0xf551 - (__x - 1) * 0x200)
-#define STV090x_P1_PDELCTRL2			STV090x_Px_PDELCTRL2(1)
-#define STV090x_P2_PDELCTRL2			STV090x_Px_PDELCTRL2(2)
-#define STV090x_OFFST_Px_FORCE_CONTINUOUS	7
-#define STV090x_WIDTH_Px_FORCE_CONTINUOUS	1
-#define STV090x_OFFST_Px_RESET_UPKO_COUNT	6
-#define STV090x_WIDTH_Px_RESET_UPKO_COUNT	1
-#define STV090x_OFFST_Px_USER_PKTDELIN_NB	5
-#define STV090x_WIDTH_Px_USER_PKTDELIN_NB	1
-#define STV090x_OFFST_Px_FORCE_LOCKED		4
-#define STV090x_WIDTH_Px_FORCE_LOCKED		1
-#define STV090x_OFFST_Px_DATA_UNBBSCRAM		3
-#define STV090x_WIDTH_Px_DATA_UNBBSCRAM		1
-#define STV090x_OFFST_Px_FORCE_LONGPACKET	2
-#define STV090x_WIDTH_Px_FORCE_LONGPACKET	1
-#define STV090x_OFFST_Px_FRAME_MODE_FIELD	1
-#define STV090x_WIDTH_Px_FRAME_MODE_FIELD	1
-
-#define STV090x_Px_HYSTTHRESH(__x)		(0xf554 - (__x - 1) * 0x200)
-#define STV090x_P1_HYSTTHRESH			STV090x_Px_HYSTTHRESH(1)
-#define STV090x_P2_HYSTTHRESH			STV090x_Px_HYSTTHRESH(2)
-#define STV090x_OFFST_Px_UNLCK_THRESH_FIELD	4
-#define STV090x_WIDTH_Px_UNLCK_THRESH_FIELD	4
-#define STV090x_OFFST_Px_DELIN_LCK_THRESH_FIELD	0
-#define STV090x_WIDTH_Px_DELIN_LCK_THRESH_FIELD	4
-
-#define STV090x_Px_ISIENTRY(__x)		(0xf55e - (__x - 1) * 0x200)
-#define STV090x_P1_ISIENTRY			STV090x_Px_ISIENTRY(1)
-#define STV090x_P2_ISIENTRY			STV090x_Px_ISIENTRY(2)
-#define STV090x_OFFST_Px_ISI_ENTRY_FIELD	0
-#define STV090x_WIDTH_Px_ISI_ENTRY_FIELD	8
-
-#define STV090x_Px_ISIBITENA(__x)		(0xf55f - (__x - 1) * 0x200)
-#define STV090x_P1_ISIBITENA			STV090x_Px_ISIBITENA(1)
-#define STV090x_P2_ISIBITENA			STV090x_Px_ISIBITENA(2)
-#define STV090x_OFFST_Px_ISI_BIT_EN_FIELD	0
-#define STV090x_WIDTH_Px_ISI_BIT_EN_FIELD	8
-
-#define STV090x_Px_MATSTRy(__x, __y)		(0xf561 - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_MATSTR0			STV090x_Px_MATSTRy(1, 0)
-#define STV090x_P1_MATSTR1			STV090x_Px_MATSTRy(1, 1)
-#define STV090x_P2_MATSTR0			STV090x_Px_MATSTRy(2, 0)
-#define STV090x_P2_MATSTR1			STV090x_Px_MATSTRy(2, 1)
-#define STV090x_OFFST_Px_MATYPE_CURRENT_FIELD	0
-#define STV090x_WIDTH_Px_MATYPE_CURRENT_FIELD	8
-
-#define STV090x_Px_UPLSTRy(__x, __y)		(0xf563 - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_UPLSTR0			STV090x_Px_UPLSTRy(1, 0)
-#define STV090x_P1_UPLSTR1			STV090x_Px_UPLSTRy(1, 1)
-#define STV090x_P2_UPLSTR0			STV090x_Px_UPLSTRy(2, 0)
-#define STV090x_P2_UPLSTR1			STV090x_Px_UPLSTRy(2, 1)
-#define STV090x_OFFST_Px_UPL_CURRENT_FIELD	0
-#define STV090x_WIDTH_Px_UPL_CURRENT_FIELD	8
-
-#define STV090x_Px_DFLSTRy(__x, __y)		(0xf565 - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_DFLSTR0			STV090x_Px_DFLSTRy(1, 0)
-#define STV090x_P1_DFLSTR1			STV090x_Px_DFLSTRy(1, 1)
-#define STV090x_P2_DFLSTR0			STV090x_Px_DFLSTRy(2, 0)
-#define STV090x_P2_DFLSTR1			STV090x_Px_DFLSTRy(2, 1)
-#define STV090x_OFFST_Px_DFL_CURRENT_FIELD	0
-#define STV090x_WIDTH_Px_DFL_CURRENT_FIELD	8
-
-#define STV090x_Px_SYNCSTR(__x)			(0xf566 - (__x - 1) * 0x200)
-#define STV090x_P1_SYNCSTR			STV090x_Px_SYNCSTR(1)
-#define STV090x_P2_SYNCSTR			STV090x_Px_SYNCSTR(2)
-#define STV090x_OFFST_Px_SYNC_CURRENT_FIELD	0
-#define STV090x_WIDTH_Px_SYNC_CURRENT_FIELD	8
-
-#define STV090x_Px_SYNCDSTRy(__x, __y)		(0xf568 - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_SYNCDSTR0			STV090x_Px_SYNCDSTRy(1, 0)
-#define STV090x_P1_SYNCDSTR1			STV090x_Px_SYNCDSTRy(1, 1)
-#define STV090x_P2_SYNCDSTR0			STV090x_Px_SYNCDSTRy(2, 0)
-#define STV090x_P2_SYNCDSTR1			STV090x_Px_SYNCDSTRy(2, 1)
-#define STV090x_OFFST_Px_SYNCD_CURRENT_FIELD	0
-#define STV090x_WIDTH_Px_SYNCD_CURRENT_FIELD	8
-
-#define STV090x_Px_PDELSTATUS1(__x)		(0xf569 - (__x - 1) * 0x200)
-#define STV090x_P1_PDELSTATUS1			STV090x_Px_PDELSTATUS1(1)
-#define STV090x_P2_PDELSTATUS1			STV090x_Px_PDELSTATUS1(2)
-#define STV090x_OFFST_Px_PKTDELIN_LOCK_FIELD	1
-#define STV090x_WIDTH_Px_PKTDELIN_LOCK_FIELD	1
-#define STV090x_OFFST_Px_FIRST_LOCK_FIELD	0
-#define STV090x_WIDTH_Px_FIRST_LOCK_FIELD	1
-
-#define STV090x_Px_PDELSTATUS2(__x)		(0xf56a - (__x - 1) * 0x200)
-#define STV090x_P1_PDELSTATUS2			STV090x_Px_PDELSTATUS2(1)
-#define STV090x_P2_PDELSTATUS2			STV090x_Px_PDELSTATUS2(2)
-#define STV090x_OFFST_Px_FRAME_MODCOD_FIELD	2
-#define STV090x_WIDTH_Px_FRAME_MODCOD_FIELD	5
-#define STV090x_OFFST_Px_FRAME_TYPE_FIELD	0
-#define STV090x_WIDTH_Px_FRAME_TYPE_FIELD	2
-
-#define STV090x_Px_BBFCRCKO1(__x)		(0xf56b - (__x - 1) * 0x200)
-#define STV090x_P1_BBFCRCKO1			STV090x_Px_BBFCRCKO1(1)
-#define STV090x_P2_BBFCRCKO1			STV090x_Px_BBFCRCKO1(2)
-#define STV090x_OFFST_Px_BBHCRC_KOCNT_FIELD	0
-#define STV090x_WIDTH_Px_BBHCRC_KOCNT_FIELD	8
-
-#define STV090x_Px_BBFCRCKO0(__x)		(0xf56c - (__x - 1) * 0x200)
-#define STV090x_P1_BBFCRCKO0			STV090x_Px_BBFCRCKO0(1)
-#define STV090x_P2_BBFCRCKO0			STV090x_Px_BBFCRCKO0(2)
-#define STV090x_OFFST_Px_BBHCRC_KOCNT_FIELD	0
-#define STV090x_WIDTH_Px_BBHCRC_KOCNT_FIELD	8
-
-#define STV090x_Px_UPCRCKO1(__x)		(0xf56d - (__x - 1) * 0x200)
-#define STV090x_P1_UPCRCKO1			STV090x_Px_UPCRCKO1(1)
-#define STV090x_P2_UPCRCKO1			STV090x_Px_UPCRCKO1(2)
-#define STV090x_OFFST_Px_PKTCRC_KOCNT_FIELD	0
-#define STV090x_WIDTH_Px_PKTCRC_KOCNT_FIELD	8
-
-#define STV090x_Px_UPCRCKO0(__x)		(0xf56e - (__x - 1) * 0x200)
-#define STV090x_P1_UPCRCKO0			STV090x_Px_UPCRCKO0(1)
-#define STV090x_P2_UPCRCKO0			STV090x_Px_UPCRCKO0(2)
-#define STV090x_OFFST_Px_PKTCRC_KOCNT_FIELD	0
-#define STV090x_WIDTH_Px_PKTCRC_KOCNT_FIELD	8
-
-#define STV090x_NBITER_NFx(__x)				(0xFA03 + (__x - 4) * 0x1)
-#define STV090x_NBITER_NF4				STV090x_NBITER_NFx(4)
-#define STV090x_NBITER_NF5				STV090x_NBITER_NFx(5)
-#define STV090x_NBITER_NF6				STV090x_NBITER_NFx(6)
-#define STV090x_NBITER_NF7				STV090x_NBITER_NFx(7)
-#define STV090x_NBITER_NF8				STV090x_NBITER_NFx(8)
-#define STV090x_NBITER_NF9				STV090x_NBITER_NFx(9)
-#define STV090x_NBITER_NF10				STV090x_NBITER_NFx(10)
-#define STV090x_NBITER_NF11				STV090x_NBITER_NFx(11)
-#define STV090x_NBITER_NF12				STV090x_NBITER_NFx(12)
-#define STV090x_NBITER_NF13				STV090x_NBITER_NFx(13)
-#define STV090x_NBITER_NF14				STV090x_NBITER_NFx(14)
-#define STV090x_NBITER_NF15				STV090x_NBITER_NFx(15)
-#define STV090x_NBITER_NF16				STV090x_NBITER_NFx(16)
-#define STV090x_NBITER_NF17				STV090x_NBITER_NFx(17)
-
-#define STV090x_NBITERNOERR				0xFA3F
-#define STV090x_OFFST_NBITER_STOP_CRIT_FIELD		0
-#define STV090x_WIDTH_NBITER_STOP_CRIT_FIELD		4
-
-#define STV090x_GAINLLR_NFx(__x)			(0xFA43 + (__x - 4) * 0x1)
-#define STV090x_GAINLLR_NF4				STV090x_GAINLLR_NFx(4)
-#define STV090x_OFFST_GAINLLR_NF_QP_1_2_FIELD		0
-#define STV090x_WIDTH_GAINLLR_NF_QP_1_2_FIELD		7
-
-#define STV090x_GAINLLR_NF5				STV090x_GAINLLR_NFx(5)
-#define STV090x_OFFST_GAINLLR_NF_QP_3_5_FIELD		0
-#define STV090x_WIDTH_GAINLLR_NF_QP_3_5_FIELD		7
-
-#define STV090x_GAINLLR_NF6				STV090x_GAINLLR_NFx(6)
-#define STV090x_OFFST_GAINLLR_NF_QP_2_3_FIELD		0
-#define STV090x_WIDTH_GAINLLR_NF_QP_2_3_FIELD		7
-
-#define STV090x_GAINLLR_NF7				STV090x_GAINLLR_NFx(7)
-#define STV090x_OFFST_GAINLLR_NF_QP_3_4_FIELD		0
-#define STV090x_WIDTH_GAINLLR_NF_QP_3_4_FIELD		7
-
-#define STV090x_GAINLLR_NF8				STV090x_GAINLLR_NFx(8)
-#define STV090x_OFFST_GAINLLR_NF_QP_4_5_FIELD		0
-#define STV090x_WIDTH_GAINLLR_NF_QP_4_5_FIELD		7
-
-#define STV090x_GAINLLR_NF9				STV090x_GAINLLR_NFx(9)
-#define STV090x_OFFST_GAINLLR_NF_QP_5_6_FIELD		0
-#define STV090x_WIDTH_GAINLLR_NF_QP_5_6_FIELD		7
-
-#define STV090x_GAINLLR_NF10				STV090x_GAINLLR_NFx(10)
-#define STV090x_OFFST_GAINLLR_NF_QP_8_9_FIELD		0
-#define STV090x_WIDTH_GAINLLR_NF_QP_8_9_FIELD		7
-
-#define STV090x_GAINLLR_NF11				STV090x_GAINLLR_NFx(11)
-#define STV090x_OFFST_GAINLLR_NF_QP_9_10_FIELD		0
-#define STV090x_WIDTH_GAINLLR_NF_QP_9_10_FIELD		7
-
-#define STV090x_GAINLLR_NF12				STV090x_GAINLLR_NFx(12)
-#define STV090x_OFFST_GAINLLR_NF_8P_3_5_FIELD		0
-#define STV090x_WIDTH_GAINLLR_NF_8P_3_5_FIELD		7
-
-#define STV090x_GAINLLR_NF13				STV090x_GAINLLR_NFx(13)
-#define STV090x_OFFST_GAINLLR_NF_8P_2_3_FIELD		0
-#define STV090x_WIDTH_GAINLLR_NF_8P_2_3_FIELD		7
-
-#define STV090x_GAINLLR_NF14				STV090x_GAINLLR_NFx(14)
-#define STV090x_OFFST_GAINLLR_NF_8P_3_4_FIELD		0
-#define STV090x_WIDTH_GAINLLR_NF_8P_3_4_FIELD		7
-
-#define STV090x_GAINLLR_NF15				STV090x_GAINLLR_NFx(15)
-#define STV090x_OFFST_GAINLLR_NF_8P_5_6_FIELD		0
-#define STV090x_WIDTH_GAINLLR_NF_8P_5_6_FIELD		7
-
-#define STV090x_GAINLLR_NF16				STV090x_GAINLLR_NFx(16)
-#define STV090x_OFFST_GAINLLR_NF_8P_8_9_FIELD		0
-#define STV090x_WIDTH_GAINLLR_NF_8P_8_9_FIELD		7
-
-#define STV090x_GAINLLR_NF17				STV090x_GAINLLR_NFx(17)
-#define STV090x_OFFST_GAINLLR_NF_8P_9_10_FIELD		0
-#define STV090x_WIDTH_GAINLLR_NF_8P_9_10_FIELD		7
-
-#define STV090x_GENCFG					0xFA86
-#define STV090x_OFFST_BROADCAST_FIELD			4
-#define STV090x_WIDTH_BROADCAST_FIELD			1
-#define STV090x_OFFST_PRIORITY_FIELD			1
-#define STV090x_WIDTH_PRIORITY_FIELD			1
-#define STV090x_OFFST_DDEMOD_FIELD			0
-#define STV090x_WIDTH_DDEMOD_FIELD			1
-
-#define STV090x_LDPCERRx(__x)				(0xFA97 - (__x  * 0x1))
-#define STV090x_LDPCERR0				STV090x_LDPCERRx(0)
-#define STV090x_LDPCERR1				STV090x_LDPCERRx(1)
-#define STV090x_OFFST_Px_LDPC_ERRORS_COUNTER_FIELD	0
-#define STV090x_WIDTH_Px_LDPC_ERRORS_COUNTER_FIELD	8
-
-#define STV090x_BCHERR					0xFA98
-#define STV090x_OFFST_Px_ERRORFLAG_FIELD		4
-#define STV090x_WIDTH_Px_ERRORFLAG_FIELD		1
-#define STV090x_OFFST_Px_BCH_ERRORS_COUNTER_FIELD	0
-#define STV090x_WIDTH_Px_BCH_ERRORS_COUNTER_FIELD	4
-
-#define STV090x_Px_TSSTATEM(__x)			(0xF570 - (__x - 1) * 0x200)
-#define STV090x_P1_TSSTATEM				STV090x_Px_TSSTATEM(1)
-#define STV090x_P2_TSSTATEM				STV090x_Px_TSSTATEM(2)
-#define STV090x_OFFST_Px_TSDIL_ON_FIELD			7
-#define STV090x_WIDTH_Px_TSDIL_ON_FIELD			1
-#define STV090x_OFFST_Px_TSRS_ON_FIELD			5
-#define STV090x_WIDTH_Px_TSRS_ON_FIELD			1
-
-#define STV090x_Px_TSCFGH(__x)				(0xF572 - (__x - 1) * 0x200)
-#define STV090x_P1_TSCFGH				STV090x_Px_TSCFGH(1)
-#define STV090x_P2_TSCFGH				STV090x_Px_TSCFGH(2)
-#define STV090x_OFFST_Px_TSFIFO_DVBCI_FIELD		7
-#define STV090x_WIDTH_Px_TSFIFO_DVBCI_FIELD		1
-#define STV090x_OFFST_Px_TSFIFO_SERIAL_FIELD		6
-#define STV090x_WIDTH_Px_TSFIFO_SERIAL_FIELD		1
-#define STV090x_OFFST_Px_TSFIFO_TEIUPDATE_FIELD		5
-#define STV090x_WIDTH_Px_TSFIFO_TEIUPDATE_FIELD		1
-#define STV090x_OFFST_Px_TSFIFO_DUTY50_FIELD		4
-#define STV090x_WIDTH_Px_TSFIFO_DUTY50_FIELD		1
-#define STV090x_OFFST_Px_TSFIFO_HSGNLOUT_FIELD		3
-#define STV090x_WIDTH_Px_TSFIFO_HSGNLOUT_FIELD		1
-#define STV090x_OFFST_Px_TSFIFO_ERRORMODE_FIELD		1
-#define STV090x_WIDTH_Px_TSFIFO_ERRORMODE_FIELD		2
-#define STV090x_OFFST_Px_RST_HWARE_FIELD		0
-#define STV090x_WIDTH_Px_RST_HWARE_FIELD		1
-
-#define STV090x_Px_TSCFGM(__x)				(0xF573 - (__x - 1) * 0x200)
-#define STV090x_P1_TSCFGM				STV090x_Px_TSCFGM(1)
-#define STV090x_P2_TSCFGM				STV090x_Px_TSCFGM(2)
-#define STV090x_OFFST_Px_TSFIFO_MANSPEED_FIELD		6
-#define STV090x_WIDTH_Px_TSFIFO_MANSPEED_FIELD		2
-#define STV090x_OFFST_Px_TSFIFO_PERMDATA_FIELD		5
-#define STV090x_WIDTH_Px_TSFIFO_PERMDATA_FIELD		1
-#define STV090x_OFFST_Px_TSFIFO_INVDATA_FIELD		0
-#define STV090x_WIDTH_Px_TSFIFO_INVDATA_FIELD		1
-
-#define STV090x_Px_TSCFGL(__x)				(0xF574 - (__x - 1) * 0x200)
-#define STV090x_P1_TSCFGL				STV090x_Px_TSCFGL(1)
-#define STV090x_P2_TSCFGL				STV090x_Px_TSCFGL(2)
-#define STV090x_OFFST_Px_TSFIFO_BCLKDEL1CK_FIELD	6
-#define STV090x_WIDTH_Px_TSFIFO_BCLKDEL1CK_FIELD	2
-#define STV090x_OFFST_Px_BCHERROR_MODE_FIELD		4
-#define STV090x_WIDTH_Px_BCHERROR_MODE_FIELD		2
-#define STV090x_OFFST_Px_TSFIFO_NSGNL2DATA_FIELD	3
-#define STV090x_WIDTH_Px_TSFIFO_NSGNL2DATA_FIELD	1
-#define STV090x_OFFST_Px_TSFIFO_EMBINDVB_FIELD		2
-#define STV090x_WIDTH_Px_TSFIFO_EMBINDVB_FIELD		1
-#define STV090x_OFFST_Px_TSFIFO_DPUNACT_FIELD		1
-#define STV090x_WIDTH_Px_TSFIFO_DPUNACT_FIELD		1
-
-#define STV090x_Px_TSINSDELH(__x)			(0xF576 - (__x - 1) * 0x200)
-#define STV090x_P1_TSINSDELH				STV090x_Px_TSINSDELH(1)
-#define STV090x_P2_TSINSDELH				STV090x_Px_TSINSDELH(2)
-#define STV090x_OFFST_Px_TSDEL_SYNCBYTE_FIELD		7
-#define STV090x_WIDTH_Px_TSDEL_SYNCBYTE_FIELD		1
-#define STV090x_OFFST_Px_TSDEL_XXHEADER_FIELD		6
-#define STV090x_WIDTH_Px_TSDEL_XXHEADER_FIELD		1
-
-#define STV090x_Px_TSSPEED(__x)				(0xF580 - (__x - 1) * 0x200)
-#define STV090x_P1_TSSPEED				STV090x_Px_TSSPEED(1)
-#define STV090x_P2_TSSPEED				STV090x_Px_TSSPEED(2)
-#define STV090x_OFFST_Px_TSFIFO_OUTSPEED_FIELD		0
-#define STV090x_WIDTH_Px_TSFIFO_OUTSPEED_FIELD		8
-
-#define STV090x_Px_TSSTATUS(__x)			(0xF581 - (__x - 1) * 0x200)
-#define STV090x_P1_TSSTATUS				STV090x_Px_TSSTATUS(1)
-#define STV090x_P2_TSSTATUS				STV090x_Px_TSSTATUS(2)
-#define STV090x_OFFST_Px_TSFIFO_LINEOK_FIELD		7
-#define STV090x_WIDTH_Px_TSFIFO_LINEOK_FIELD		1
-#define STV090x_OFFST_Px_TSFIFO_ERROR_FIELD		6
-#define STV090x_WIDTH_Px_TSFIFO_ERROR_FIELD		1
-
-#define STV090x_Px_TSSTATUS2(__x)			(0xF582 - (__x - 1) * 0x200)
-#define STV090x_P1_TSSTATUS2				STV090x_Px_TSSTATUS2(1)
-#define STV090x_P2_TSSTATUS2				STV090x_Px_TSSTATUS2(2)
-#define STV090x_OFFST_Px_TSFIFO_DEMODSEL_FIELD		7
-#define STV090x_WIDTH_Px_TSFIFO_DEMODSEL_FIELD		1
-#define STV090x_OFFST_Px_TSFIFOSPEED_STORE_FIELD	6
-#define STV090x_WIDTH_Px_TSFIFOSPEED_STORE_FIELD	1
-#define STV090x_OFFST_Px_DILXX_RESET_FIELD		5
-#define STV090x_WIDTH_Px_DILXX_RESET_FIELD		1
-#define STV090x_OFFST_Px_TSSERIAL_IMPOS_FIELD		4
-#define STV090x_WIDTH_Px_TSSERIAL_IMPOS_FIELD		1
-#define STV090x_OFFST_Px_SCRAMBDETECT_FIELD		1
-#define STV090x_WIDTH_Px_SCRAMBDETECT_FIELD		1
-
-#define STV090x_Px_TSBITRATEy(__x, __y)			(0xF584 - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_TSBITRATE0				STV090x_Px_TSBITRATEy(1, 0)
-#define STV090x_P1_TSBITRATE1				STV090x_Px_TSBITRATEy(1, 1)
-#define STV090x_P2_TSBITRATE0				STV090x_Px_TSBITRATEy(2, 0)
-#define STV090x_P2_TSBITRATE1				STV090x_Px_TSBITRATEy(2, 1)
-#define STV090x_OFFST_Px_TSFIFO_BITRATE_FIELD		0
-#define STV090x_WIDTH_Px_TSFIFO_BITRATE_FIELD		8
-
-#define STV090x_Px_ERRCTRL1(__x)			(0xF598 - (__x - 1) * 0x200)
-#define STV090x_P1_ERRCTRL1				STV090x_Px_ERRCTRL1(1)
-#define STV090x_P2_ERRCTRL1				STV090x_Px_ERRCTRL1(2)
-#define STV090x_OFFST_Px_ERR_SOURCE_FIELD		4
-#define STV090x_WIDTH_Px_ERR_SOURCE_FIELD		4
-#define STV090x_OFFST_Px_NUM_EVENT_FIELD		0
-#define STV090x_WIDTH_Px_NUM_EVENT_FIELD		3
-
-#define STV090x_Px_ERRCNT12(__x)			(0xF599 - (__x - 1) * 0x200)
-#define STV090x_P1_ERRCNT12				STV090x_Px_ERRCNT12(1)
-#define STV090x_P2_ERRCNT12				STV090x_Px_ERRCNT12(2)
-#define STV090x_OFFST_Px_ERRCNT1_OLDVALUE_FIELD		7
-#define STV090x_WIDTH_Px_ERRCNT1_OLDVALUE_FIELD		1
-#define STV090x_OFFST_Px_ERR_CNT12_FIELD		0
-#define STV090x_WIDTH_Px_ERR_CNT12_FIELD		7
-
-#define STV090x_Px_ERRCNT11(__x)			(0xF59A - (__x - 1) * 0x200)
-#define STV090x_P1_ERRCNT11				STV090x_Px_ERRCNT11(1)
-#define STV090x_P2_ERRCNT11				STV090x_Px_ERRCNT11(2)
-#define STV090x_OFFST_Px_ERR_CNT11_FIELD		0
-#define STV090x_WIDTH_Px_ERR_CNT11_FIELD		8
-
-#define STV090x_Px_ERRCNT10(__x)			(0xF59B - (__x - 1) * 0x200)
-#define STV090x_P1_ERRCNT10				STV090x_Px_ERRCNT10(1)
-#define STV090x_P2_ERRCNT10				STV090x_Px_ERRCNT10(2)
-#define STV090x_OFFST_Px_ERR_CNT10_FIELD		0
-#define STV090x_WIDTH_Px_ERR_CNT10_FIELD		8
-
-#define STV090x_Px_ERRCTRL2(__x)			(0xF59C - (__x - 1) * 0x200)
-#define STV090x_P1_ERRCTRL2				STV090x_Px_ERRCTRL2(1)
-#define STV090x_P2_ERRCTRL2				STV090x_Px_ERRCTRL2(2)
-#define STV090x_OFFST_Px_ERR_SOURCE2_FIELD		4
-#define STV090x_WIDTH_Px_ERR_SOURCE2_FIELD		4
-#define STV090x_OFFST_Px_NUM_EVENT2_FIELD		0
-#define STV090x_WIDTH_Px_NUM_EVENT2_FIELD		3
-
-#define STV090x_Px_ERRCNT22(__x)			(0xF59D - (__x - 1) * 0x200)
-#define STV090x_P1_ERRCNT22				STV090x_Px_ERRCNT22(1)
-#define STV090x_P2_ERRCNT22				STV090x_Px_ERRCNT22(2)
-#define STV090x_OFFST_Px_ERRCNT2_OLDVALUE_FIELD		7
-#define STV090x_WIDTH_Px_ERRCNT2_OLDVALUE_FIELD		1
-#define STV090x_OFFST_Px_ERR_CNT2_FIELD			0
-#define STV090x_WIDTH_Px_ERR_CNT2_FIELD			7
-
-#define STV090x_Px_ERRCNT21(__x)			(0xF59E - (__x - 1) * 0x200)
-#define STV090x_P1_ERRCNT21				STV090x_Px_ERRCNT21(1)
-#define STV090x_P2_ERRCNT21				STV090x_Px_ERRCNT21(2)
-#define STV090x_OFFST_Px_ERR_CNT21_FIELD		0
-#define STV090x_WIDTH_Px_ERR_CNT21_FIELD		8
-
-#define STV090x_Px_ERRCNT20(__x)			(0xF59F - (__x - 1) * 0x200)
-#define STV090x_P1_ERRCNT20				STV090x_Px_ERRCNT20(1)
-#define STV090x_P2_ERRCNT20				STV090x_Px_ERRCNT20(2)
-#define STV090x_OFFST_Px_ERR_CNT20_FIELD		0
-#define STV090x_WIDTH_Px_ERR_CNT20_FIELD		8
-
-#define STV090x_Px_FECSPY(__x)				(0xF5A0 - (__x - 1) * 0x200)
-#define STV090x_P1_FECSPY				STV090x_Px_FECSPY(1)
-#define STV090x_P2_FECSPY				STV090x_Px_FECSPY(2)
-#define STV090x_OFFST_Px_SPY_ENABLE_FIELD		7
-#define STV090x_WIDTH_Px_SPY_ENABLE_FIELD		1
-#define STV090x_OFFST_Px_BERMETER_DATAMAODE_FIELD	2
-#define STV090x_WIDTH_Px_BERMETER_DATAMAODE_FIELD	2
-
-#define STV090x_Px_FSPYCFG(__x)				(0xF5A1 - (__x - 1) * 0x200)
-#define STV090x_P1_FSPYCFG				STV090x_Px_FSPYCFG(1)
-#define STV090x_P2_FSPYCFG				STV090x_Px_FSPYCFG(2)
-#define STV090x_OFFST_Px_RST_ON_ERROR_FIELD		5
-#define STV090x_WIDTH_Px_RST_ON_ERROR_FIELD		1
-#define STV090x_OFFST_Px_ONE_SHOT_FIELD			4
-#define STV090x_WIDTH_Px_ONE_SHOT_FIELD			1
-#define STV090x_OFFST_Px_I2C_MODE_FIELD			2
-#define STV090x_WIDTH_Px_I2C_MODE_FIELD			2
-
-#define STV090x_Px_FSPYDATA(__x)			(0xF5A2 - (__x - 1) * 0x200)
-#define STV090x_P1_FSPYDATA				STV090x_Px_FSPYDATA(1)
-#define STV090x_P2_FSPYDATA				STV090x_Px_FSPYDATA(2)
-#define STV090x_OFFST_Px_SPY_STUFFING_FIELD		7
-#define STV090x_WIDTH_Px_SPY_STUFFING_FIELD		1
-#define STV090x_OFFST_Px_SPY_CNULLPKT_FIELD		5
-#define STV090x_WIDTH_Px_SPY_CNULLPKT_FIELD		1
-#define STV090x_OFFST_Px_SPY_OUTDATA_MODE_FIELD		0
-#define STV090x_WIDTH_Px_SPY_OUTDATA_MODE_FIELD		5
-
-#define STV090x_Px_FSPYOUT(__x)				(0xF5A3 - (__x - 1) * 0x200)
-#define STV090x_P1_FSPYOUT				STV090x_Px_FSPYOUT(1)
-#define STV090x_P2_FSPYOUT				STV090x_Px_FSPYOUT(2)
-#define STV090x_OFFST_Px_FSPY_DIRECT_FIELD		7
-#define STV090x_WIDTH_Px_FSPY_DIRECT_FIELD		1
-#define STV090x_OFFST_Px_STUFF_MODE_FIELD		0
-#define STV090x_WIDTH_Px_STUFF_MODE_FIELD		3
-
-#define STV090x_Px_FSTATUS(__x)				(0xF5A4 - (__x - 1) * 0x200)
-#define STV090x_P1_FSTATUS				STV090x_Px_FSTATUS(1)
-#define STV090x_P2_FSTATUS				STV090x_Px_FSTATUS(2)
-#define STV090x_OFFST_Px_SPY_ENDSIM_FIELD		7
-#define STV090x_WIDTH_Px_SPY_ENDSIM_FIELD		1
-#define STV090x_OFFST_Px_VALID_SIM_FIELD		6
-#define STV090x_WIDTH_Px_VALID_SIM_FIELD		1
-#define STV090x_OFFST_Px_FOUND_SIGNAL_FIELD		5
-#define STV090x_WIDTH_Px_FOUND_SIGNAL_FIELD		1
-#define STV090x_OFFST_Px_DSS_SYNCBYTE_FIELD		4
-#define STV090x_WIDTH_Px_DSS_SYNCBYTE_FIELD		1
-#define STV090x_OFFST_Px_RESULT_STATE_FIELD		0
-#define STV090x_WIDTH_Px_RESULT_STATE_FIELD		4
-
-#define STV090x_Px_FBERCPT4(__x)			(0xF5A8 - (__x - 1) * 0x200)
-#define STV090x_P1_FBERCPT4				STV090x_Px_FBERCPT4(1)
-#define STV090x_P2_FBERCPT4				STV090x_Px_FBERCPT4(2)
-#define STV090x_OFFST_Px_FBERMETER_CPT_FIELD		0
-#define STV090x_WIDTH_Px_FBERMETER_CPT_FIELD		8
-
-#define STV090x_Px_FBERCPT3(__x)			(0xF5A9 - (__x - 1) * 0x200)
-#define STV090x_P1_FBERCPT3				STV090x_Px_FBERCPT3(1)
-#define STV090x_P2_FBERCPT3				STV090x_Px_FBERCPT3(2)
-#define STV090x_OFFST_Px_FBERMETER_CPT_FIELD		0
-#define STV090x_WIDTH_Px_FBERMETER_CPT_FIELD		8
-
-#define STV090x_Px_FBERCPT2(__x)			(0xF5AA - (__x - 1) * 0x200)
-#define STV090x_P1_FBERCPT2				STV090x_Px_FBERCPT2(1)
-#define STV090x_P2_FBERCPT2				STV090x_Px_FBERCPT2(2)
-#define STV090x_OFFST_Px_FBERMETER_CPT_FIELD		0
-#define STV090x_WIDTH_Px_FBERMETER_CPT_FIELD		8
-
-#define STV090x_Px_FBERCPT1(__x)			(0xF5AB - (__x - 1) * 0x200)
-#define STV090x_P1_FBERCPT1				STV090x_Px_FBERCPT1(1)
-#define STV090x_P2_FBERCPT1				STV090x_Px_FBERCPT1(2)
-#define STV090x_OFFST_Px_FBERMETER_CPT_FIELD		0
-#define STV090x_WIDTH_Px_FBERMETER_CPT_FIELD		8
-
-#define STV090x_Px_FBERCPT0(__x)			(0xF5AC - (__x - 1) * 0x200)
-#define STV090x_P1_FBERCPT0				STV090x_Px_FBERCPT0(1)
-#define STV090x_P2_FBERCPT0				STV090x_Px_FBERCPT0(2)
-#define STV090x_OFFST_Px_FBERMETER_CPT_FIELD		0
-#define STV090x_WIDTH_Px_FBERMETER_CPT_FIELD		8
-
-#define STV090x_Px_FBERERRy(__x, __y)			(0xF5AF - (__x - 1) * 0x200 - __y * 0x1)
-#define STV090x_P1_FBERERR0				STV090x_Px_FBERERRy(1, 0)
-#define STV090x_P1_FBERERR1				STV090x_Px_FBERERRy(1, 1)
-#define STV090x_P1_FBERERR2				STV090x_Px_FBERERRy(1, 2)
-#define STV090x_P2_FBERERR0				STV090x_Px_FBERERRy(2, 0)
-#define STV090x_P2_FBERERR1				STV090x_Px_FBERERRy(2, 1)
-#define STV090x_P2_FBERERR2				STV090x_Px_FBERERRy(2, 2)
-#define STV090x_OFFST_Px_FBERMETER_CPT_ERR_FIELD	0
-#define STV090x_WIDTH_Px_FBERMETER_CPT_ERR_FIELD	8
-
-#define STV090x_Px_FSPYBER(__x)				(0xF5B2 - (__x - 1) * 0x200)
-#define STV090x_P1_FSPYBER				STV090x_Px_FSPYBER(1)
-#define STV090x_P2_FSPYBER				STV090x_Px_FSPYBER(2)
-#define STV090x_OFFST_Px_FSPYBER_SYNCBYTE_FIELD		4
-#define STV090x_WIDTH_Px_FSPYBER_SYNCBYTE_FIELD		1
-#define STV090x_OFFST_Px_FSPYBER_UNSYNC_FIELD		3
-#define STV090x_WIDTH_Px_FSPYBER_UNSYNC_FIELD		1
-#define STV090x_OFFST_Px_FSPYBER_CTIME_FIELD		0
-#define STV090x_WIDTH_Px_FSPYBER_CTIME_FIELD		3
-
-#define STV090x_RCCFGH					0xf600
-
-#define STV090x_TSGENERAL				0xF630
-#define STV090x_OFFST_Px_MUXSTREAM_OUT_FIELD		3
-#define STV090x_WIDTH_Px_MUXSTREAM_OUT_FIELD		1
-#define STV090x_OFFST_Px_TSFIFO_PERMPARAL_FIELD		1
-#define STV090x_WIDTH_Px_TSFIFO_PERMPARAL_FIELD		2
-
-#define STV090x_TSGENERAL1X				0xf670
-#define STV090x_CFGEXT					0xfa80
-
-#define STV090x_TSTRES0					0xFF11
-#define STV090x_OFFST_FRESFEC_FIELD			7
-#define STV090x_WIDTH_FRESFEC_FIELD			1
-
-#define STV090x_Px_TSTDISRX(__x)			(0xFF67 - (__x - 1) * 0x2)
-#define STV090x_P1_TSTDISRX				STV090x_Px_TSTDISRX(1)
-#define STV090x_P2_TSTDISRX				STV090x_Px_TSTDISRX(2)
-#define STV090x_OFFST_Px_TSTDISRX_SELECT_FIELD		3
-#define STV090x_WIDTH_Px_TSTDISRX_SELECT_FIELD		1
-
-#endif /* __STV090x_REG_H */
diff --git a/drivers/media/dvb/frontends/stv6110.c b/drivers/media/dvb/frontends/stv6110.c
deleted file mode 100644
index 20b5fa9..0000000
--- a/drivers/media/dvb/frontends/stv6110.c
+++ /dev/null
@@ -1,451 +0,0 @@
-/*
- * stv6110.c
- *
- * Driver for ST STV6110 satellite tuner IC.
- *
- * Copyright (C) 2009 NetUP Inc.
- * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/dvb/frontend.h>
-
-#include <linux/types.h>
-
-#include "stv6110.h"
-
-static int debug;
-
-struct stv6110_priv {
-	int i2c_address;
-	struct i2c_adapter *i2c;
-
-	u32 mclk;
-	u8 clk_div;
-	u8 gain;
-	u8 regs[8];
-};
-
-#define dprintk(args...) \
-	do { \
-		if (debug) \
-			printk(KERN_DEBUG args); \
-	} while (0)
-
-static s32 abssub(s32 a, s32 b)
-{
-	if (a > b)
-		return a - b;
-	else
-		return b - a;
-};
-
-static int stv6110_release(struct dvb_frontend *fe)
-{
-	kfree(fe->tuner_priv);
-	fe->tuner_priv = NULL;
-	return 0;
-}
-
-static int stv6110_write_regs(struct dvb_frontend *fe, u8 buf[],
-							int start, int len)
-{
-	struct stv6110_priv *priv = fe->tuner_priv;
-	int rc;
-	u8 cmdbuf[len + 1];
-	struct i2c_msg msg = {
-		.addr	= priv->i2c_address,
-		.flags	= 0,
-		.buf	= cmdbuf,
-		.len	= len + 1
-	};
-
-	dprintk("%s\n", __func__);
-
-	if (start + len > 8)
-		return -EINVAL;
-
-	memcpy(&cmdbuf[1], buf, len);
-	cmdbuf[0] = start;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	rc = i2c_transfer(priv->i2c, &msg, 1);
-	if (rc != 1)
-		dprintk("%s: i2c error\n", __func__);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-
-	return 0;
-}
-
-static int stv6110_read_regs(struct dvb_frontend *fe, u8 regs[],
-							int start, int len)
-{
-	struct stv6110_priv *priv = fe->tuner_priv;
-	int rc;
-	u8 reg[] = { start };
-	struct i2c_msg msg[] = {
-		{
-			.addr	= priv->i2c_address,
-			.flags	= 0,
-			.buf	= reg,
-			.len	= 1,
-		}, {
-			.addr	= priv->i2c_address,
-			.flags	= I2C_M_RD,
-			.buf	= regs,
-			.len	= len,
-		},
-	};
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	rc = i2c_transfer(priv->i2c, msg, 2);
-	if (rc != 2)
-		dprintk("%s: i2c error\n", __func__);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-
-	memcpy(&priv->regs[start], regs, len);
-
-	return 0;
-}
-
-static int stv6110_read_reg(struct dvb_frontend *fe, int start)
-{
-	u8 buf[] = { 0 };
-	stv6110_read_regs(fe, buf, start, 1);
-
-	return buf[0];
-}
-
-static int stv6110_sleep(struct dvb_frontend *fe)
-{
-	u8 reg[] = { 0 };
-	stv6110_write_regs(fe, reg, 0, 1);
-
-	return 0;
-}
-
-static u32 carrier_width(u32 symbol_rate, fe_rolloff_t rolloff)
-{
-	u32 rlf;
-
-	switch (rolloff) {
-	case ROLLOFF_20:
-		rlf = 20;
-		break;
-	case ROLLOFF_25:
-		rlf = 25;
-		break;
-	default:
-		rlf = 35;
-		break;
-	}
-
-	return symbol_rate  + ((symbol_rate * rlf) / 100);
-}
-
-static int stv6110_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth)
-{
-	struct stv6110_priv *priv = fe->tuner_priv;
-	u8 r8, ret = 0x04;
-	int i;
-
-	if ((bandwidth / 2) > 36000000) /*BW/2 max=31+5=36 mhz for r8=31*/
-		r8 = 31;
-	else if ((bandwidth / 2) < 5000000) /* BW/2 min=5Mhz for F=0 */
-		r8 = 0;
-	else /*if 5 < BW/2 < 36*/
-		r8 = (bandwidth / 2) / 1000000 - 5;
-
-	/* ctrl3, RCCLKOFF = 0 Activate the calibration Clock */
-	/* ctrl3, CF = r8 Set the LPF value */
-	priv->regs[RSTV6110_CTRL3] &= ~((1 << 6) | 0x1f);
-	priv->regs[RSTV6110_CTRL3] |= (r8 & 0x1f);
-	stv6110_write_regs(fe, &priv->regs[RSTV6110_CTRL3], RSTV6110_CTRL3, 1);
-	/* stat1, CALRCSTRT = 1 Start LPF auto calibration*/
-	priv->regs[RSTV6110_STAT1] |= 0x02;
-	stv6110_write_regs(fe, &priv->regs[RSTV6110_STAT1], RSTV6110_STAT1, 1);
-
-	i = 0;
-	/* Wait for CALRCSTRT == 0 */
-	while ((i < 10) && (ret != 0)) {
-		ret = ((stv6110_read_reg(fe, RSTV6110_STAT1)) & 0x02);
-		mdelay(1);	/* wait for LPF auto calibration */
-		i++;
-	}
-
-	/* RCCLKOFF = 1 calibration done, desactivate the calibration Clock */
-	priv->regs[RSTV6110_CTRL3] |= (1 << 6);
-	stv6110_write_regs(fe, &priv->regs[RSTV6110_CTRL3], RSTV6110_CTRL3, 1);
-	return 0;
-}
-
-static int stv6110_init(struct dvb_frontend *fe)
-{
-	struct stv6110_priv *priv = fe->tuner_priv;
-	u8 buf0[] = { 0x07, 0x11, 0xdc, 0x85, 0x17, 0x01, 0xe6, 0x1e };
-
-	memcpy(priv->regs, buf0, 8);
-	/* K = (Reference / 1000000) - 16 */
-	priv->regs[RSTV6110_CTRL1] &= ~(0x1f << 3);
-	priv->regs[RSTV6110_CTRL1] |=
-				((((priv->mclk / 1000000) - 16) & 0x1f) << 3);
-
-	/* divisor value for the output clock */
-	priv->regs[RSTV6110_CTRL2] &= ~0xc0;
-	priv->regs[RSTV6110_CTRL2] |= (priv->clk_div << 6);
-
-	stv6110_write_regs(fe, &priv->regs[RSTV6110_CTRL1], RSTV6110_CTRL1, 8);
-	msleep(1);
-	stv6110_set_bandwidth(fe, 72000000);
-
-	return 0;
-}
-
-static int stv6110_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
-	struct stv6110_priv *priv = fe->tuner_priv;
-	u32 nbsteps, divider, psd2, freq;
-	u8 regs[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
-
-	stv6110_read_regs(fe, regs, 0, 8);
-	/*N*/
-	divider = (priv->regs[RSTV6110_TUNING2] & 0x0f) << 8;
-	divider += priv->regs[RSTV6110_TUNING1];
-
-	/*R*/
-	nbsteps  = (priv->regs[RSTV6110_TUNING2] >> 6) & 3;
-	/*p*/
-	psd2  = (priv->regs[RSTV6110_TUNING2] >> 4) & 1;
-
-	freq = divider * (priv->mclk / 1000);
-	freq /= (1 << (nbsteps + psd2));
-	freq /= 4;
-
-	*frequency = freq;
-
-	return 0;
-}
-
-static int stv6110_set_frequency(struct dvb_frontend *fe, u32 frequency)
-{
-	struct stv6110_priv *priv = fe->tuner_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	u8 ret = 0x04;
-	u32 divider, ref, p, presc, i, result_freq, vco_freq;
-	s32 p_calc, p_calc_opt = 1000, r_div, r_div_opt = 0, p_val;
-	s32 srate;
-
-	dprintk("%s, freq=%d kHz, mclk=%d Hz\n", __func__,
-						frequency, priv->mclk);
-
-	/* K = (Reference / 1000000) - 16 */
-	priv->regs[RSTV6110_CTRL1] &= ~(0x1f << 3);
-	priv->regs[RSTV6110_CTRL1] |=
-				((((priv->mclk / 1000000) - 16) & 0x1f) << 3);
-
-	/* BB_GAIN = db/2 */
-	if (fe->ops.set_property && fe->ops.get_property) {
-		srate = c->symbol_rate;
-		dprintk("%s: Get Frontend parameters: srate=%d\n",
-							__func__, srate);
-	} else
-		srate = 15000000;
-
-	priv->regs[RSTV6110_CTRL2] &= ~0x0f;
-	priv->regs[RSTV6110_CTRL2] |= (priv->gain & 0x0f);
-
-	if (frequency <= 1023000) {
-		p = 1;
-		presc = 0;
-	} else if (frequency <= 1300000) {
-		p = 1;
-		presc = 1;
-	} else if (frequency <= 2046000) {
-		p = 0;
-		presc = 0;
-	} else {
-		p = 0;
-		presc = 1;
-	}
-	/* DIV4SEL = p*/
-	priv->regs[RSTV6110_TUNING2] &= ~(1 << 4);
-	priv->regs[RSTV6110_TUNING2] |= (p << 4);
-
-	/* PRESC32ON = presc */
-	priv->regs[RSTV6110_TUNING2] &= ~(1 << 5);
-	priv->regs[RSTV6110_TUNING2] |= (presc << 5);
-
-	p_val = (int)(1 << (p + 1)) * 10;/* P = 2 or P = 4 */
-	for (r_div = 0; r_div <= 3; r_div++) {
-		p_calc = (priv->mclk / 100000);
-		p_calc /= (1 << (r_div + 1));
-		if ((abssub(p_calc, p_val)) < (abssub(p_calc_opt, p_val)))
-			r_div_opt = r_div;
-
-		p_calc_opt = (priv->mclk / 100000);
-		p_calc_opt /= (1 << (r_div_opt + 1));
-	}
-
-	ref = priv->mclk / ((1 << (r_div_opt + 1))  * (1 << (p + 1)));
-	divider = (((frequency * 1000) + (ref >> 1)) / ref);
-
-	/* RDIV = r_div_opt */
-	priv->regs[RSTV6110_TUNING2] &= ~(3 << 6);
-	priv->regs[RSTV6110_TUNING2] |= (((r_div_opt) & 3) << 6);
-
-	/* NDIV_MSB = MSB(divider) */
-	priv->regs[RSTV6110_TUNING2] &= ~0x0f;
-	priv->regs[RSTV6110_TUNING2] |= (((divider) >> 8) & 0x0f);
-
-	/* NDIV_LSB, LSB(divider) */
-	priv->regs[RSTV6110_TUNING1] = (divider & 0xff);
-
-	/* CALVCOSTRT = 1 VCO Auto Calibration */
-	priv->regs[RSTV6110_STAT1] |= 0x04;
-	stv6110_write_regs(fe, &priv->regs[RSTV6110_CTRL1],
-						RSTV6110_CTRL1, 8);
-
-	i = 0;
-	/* Wait for CALVCOSTRT == 0 */
-	while ((i < 10) && (ret != 0)) {
-		ret = ((stv6110_read_reg(fe, RSTV6110_STAT1)) & 0x04);
-		msleep(1); /* wait for VCO auto calibration */
-		i++;
-	}
-
-	ret = stv6110_read_reg(fe, RSTV6110_STAT1);
-	stv6110_get_frequency(fe, &result_freq);
-
-	vco_freq = divider * ((priv->mclk / 1000) / ((1 << (r_div_opt + 1))));
-	dprintk("%s, stat1=%x, lo_freq=%d kHz, vco_frec=%d kHz\n", __func__,
-						ret, result_freq, vco_freq);
-
-	return 0;
-}
-
-static int stv6110_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	u32 bandwidth = carrier_width(c->symbol_rate, c->rolloff);
-
-	stv6110_set_frequency(fe, c->frequency);
-	stv6110_set_bandwidth(fe, bandwidth);
-
-	return 0;
-}
-
-static int stv6110_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
-{
-	struct stv6110_priv *priv = fe->tuner_priv;
-	u8 r8 = 0;
-	u8 regs[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
-	stv6110_read_regs(fe, regs, 0, 8);
-
-	/* CF */
-	r8 = priv->regs[RSTV6110_CTRL3] & 0x1f;
-	*bandwidth = (r8 + 5) * 2000000;/* x2 for ZIF tuner BW/2 = F+5 Mhz */
-
-	return 0;
-}
-
-static struct dvb_tuner_ops stv6110_tuner_ops = {
-	.info = {
-		.name = "ST STV6110",
-		.frequency_min = 950000,
-		.frequency_max = 2150000,
-		.frequency_step = 1000,
-	},
-	.init = stv6110_init,
-	.release = stv6110_release,
-	.sleep = stv6110_sleep,
-	.set_params = stv6110_set_params,
-	.get_frequency = stv6110_get_frequency,
-	.set_frequency = stv6110_set_frequency,
-	.get_bandwidth = stv6110_get_bandwidth,
-	.set_bandwidth = stv6110_set_bandwidth,
-
-};
-
-struct dvb_frontend *stv6110_attach(struct dvb_frontend *fe,
-					const struct stv6110_config *config,
-					struct i2c_adapter *i2c)
-{
-	struct stv6110_priv *priv = NULL;
-	u8 reg0[] = { 0x00, 0x07, 0x11, 0xdc, 0x85, 0x17, 0x01, 0xe6, 0x1e };
-
-	struct i2c_msg msg[] = {
-		{
-			.addr = config->i2c_address,
-			.flags = 0,
-			.buf = reg0,
-			.len = 9
-		}
-	};
-	int ret;
-
-	/* divisor value for the output clock */
-	reg0[2] &= ~0xc0;
-	reg0[2] |= (config->clk_div << 6);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	ret = i2c_transfer(i2c, msg, 1);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-
-	if (ret != 1)
-		return NULL;
-
-	priv = kzalloc(sizeof(struct stv6110_priv), GFP_KERNEL);
-	if (priv == NULL)
-		return NULL;
-
-	priv->i2c_address = config->i2c_address;
-	priv->i2c = i2c;
-	priv->mclk = config->mclk;
-	priv->clk_div = config->clk_div;
-	priv->gain = config->gain;
-
-	memcpy(&priv->regs, &reg0[1], 8);
-
-	memcpy(&fe->ops.tuner_ops, &stv6110_tuner_ops,
-				sizeof(struct dvb_tuner_ops));
-	fe->tuner_priv = priv;
-	printk(KERN_INFO "STV6110 attached on addr=%x!\n", priv->i2c_address);
-
-	return fe;
-}
-EXPORT_SYMBOL(stv6110_attach);
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("ST STV6110 driver");
-MODULE_AUTHOR("Igor M. Liplianin");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/stv6110.h b/drivers/media/dvb/frontends/stv6110.h
deleted file mode 100644
index fe71bba..0000000
--- a/drivers/media/dvb/frontends/stv6110.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * stv6110.h
- *
- * Driver for ST STV6110 satellite tuner IC.
- *
- * Copyright (C) 2009 NetUP Inc.
- * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __DVB_STV6110_H__
-#define __DVB_STV6110_H__
-
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-
-/* registers */
-#define RSTV6110_CTRL1		0
-#define RSTV6110_CTRL2		1
-#define RSTV6110_TUNING1	2
-#define RSTV6110_TUNING2	3
-#define RSTV6110_CTRL3		4
-#define RSTV6110_STAT1		5
-#define RSTV6110_STAT2		6
-#define RSTV6110_STAT3		7
-
-struct stv6110_config {
-	u8 i2c_address;
-	u32 mclk;
-	u8 gain;
-	u8 clk_div;	/* divisor value for the output clock */
-};
-
-#if defined(CONFIG_DVB_STV6110) || (defined(CONFIG_DVB_STV6110_MODULE) \
-							&& defined(MODULE))
-extern struct dvb_frontend *stv6110_attach(struct dvb_frontend *fe,
-					const struct stv6110_config *config,
-					struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *stv6110_attach(struct dvb_frontend *fe,
-					const struct stv6110_config *config,
-					struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif
diff --git a/drivers/media/dvb/frontends/stv6110x.c b/drivers/media/dvb/frontends/stv6110x.c
deleted file mode 100644
index f36cab1..0000000
--- a/drivers/media/dvb/frontends/stv6110x.c
+++ /dev/null
@@ -1,405 +0,0 @@
-/*
-	STV6110(A) Silicon tuner driver
-
-	Copyright (C) Manu Abraham <abraham.manu@gmail.com>
-
-	Copyright (C) ST Microelectronics
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-
-#include "dvb_frontend.h"
-
-#include "stv6110x_reg.h"
-#include "stv6110x.h"
-#include "stv6110x_priv.h"
-
-static unsigned int verbose;
-module_param(verbose, int, 0644);
-MODULE_PARM_DESC(verbose, "Set Verbosity level");
-
-static int stv6110x_read_reg(struct stv6110x_state *stv6110x, u8 reg, u8 *data)
-{
-	int ret;
-	const struct stv6110x_config *config = stv6110x->config;
-	u8 b0[] = { reg };
-	u8 b1[] = { 0 };
-	struct i2c_msg msg[] = {
-		{ .addr = config->addr, .flags = 0, 	   .buf = b0, .len = 1 },
-		{ .addr = config->addr, .flags = I2C_M_RD, .buf = b1, .len = 1 }
-	};
-
-	ret = i2c_transfer(stv6110x->i2c, msg, 2);
-	if (ret != 2) {
-		dprintk(FE_ERROR, 1, "I/O Error");
-		return -EREMOTEIO;
-	}
-	*data = b1[0];
-
-	return 0;
-}
-
-static int stv6110x_write_regs(struct stv6110x_state *stv6110x, int start, u8 data[], int len)
-{
-	int ret;
-	const struct stv6110x_config *config = stv6110x->config;
-	u8 buf[len + 1];
-	struct i2c_msg msg = {
-		.addr = config->addr,
-		.flags = 0,
-		.buf = buf,
-		.len = len + 1
-	};
-
-	if (start + len > 8)
-		return -EINVAL;
-
-	buf[0] = start;
-	memcpy(&buf[1], data, len);
-
-	ret = i2c_transfer(stv6110x->i2c, &msg, 1);
-	if (ret != 1) {
-		dprintk(FE_ERROR, 1, "I/O Error");
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int stv6110x_write_reg(struct stv6110x_state *stv6110x, u8 reg, u8 data)
-{
-	return stv6110x_write_regs(stv6110x, reg, &data, 1);
-}
-
-static int stv6110x_init(struct dvb_frontend *fe)
-{
-	struct stv6110x_state *stv6110x = fe->tuner_priv;
-	int ret;
-
-	ret = stv6110x_write_regs(stv6110x, 0, stv6110x->regs,
-				  ARRAY_SIZE(stv6110x->regs));
-	if (ret < 0) {
-		dprintk(FE_ERROR, 1, "Initialization failed");
-		return -1;
-	}
-
-	return 0;
-}
-
-static int stv6110x_set_frequency(struct dvb_frontend *fe, u32 frequency)
-{
-	struct stv6110x_state *stv6110x = fe->tuner_priv;
-	u32 rDiv, divider;
-	s32 pVal, pCalc, rDivOpt = 0, pCalcOpt = 1000;
-	u8 i;
-
-	STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_K, (REFCLOCK_MHz - 16));
-
-	if (frequency <= 1023000) {
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_DIV4SEL, 1);
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_PRESC32_ON, 0);
-		pVal = 40;
-	} else if (frequency <= 1300000) {
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_DIV4SEL, 1);
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_PRESC32_ON, 1);
-		pVal = 40;
-	} else if (frequency <= 2046000) {
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_DIV4SEL, 0);
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_PRESC32_ON, 0);
-		pVal = 20;
-	} else {
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_DIV4SEL, 0);
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_PRESC32_ON, 1);
-		pVal = 20;
-	}
-
-	for (rDiv = 0; rDiv <= 3; rDiv++) {
-		pCalc = (REFCLOCK_kHz / 100) / R_DIV(rDiv);
-
-		if ((abs((s32)(pCalc - pVal))) < (abs((s32)(pCalcOpt - pVal))))
-			rDivOpt = rDiv;
-
-		pCalcOpt = (REFCLOCK_kHz / 100) / R_DIV(rDivOpt);
-	}
-
-	divider = (frequency * R_DIV(rDivOpt) * pVal) / REFCLOCK_kHz;
-	divider = (divider + 5) / 10;
-
-	STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_R_DIV, rDivOpt);
-	STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_N_DIV_11_8, MSB(divider));
-	STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG0], TNG0_N_DIV_7_0, LSB(divider));
-
-	/* VCO Auto calibration */
-	STV6110x_SETFIELD(stv6110x->regs[STV6110x_STAT1], STAT1_CALVCO_STRT, 1);
-
-	stv6110x_write_reg(stv6110x, STV6110x_CTRL1, stv6110x->regs[STV6110x_CTRL1]);
-	stv6110x_write_reg(stv6110x, STV6110x_TNG1, stv6110x->regs[STV6110x_TNG1]);
-	stv6110x_write_reg(stv6110x, STV6110x_TNG0, stv6110x->regs[STV6110x_TNG0]);
-	stv6110x_write_reg(stv6110x, STV6110x_STAT1, stv6110x->regs[STV6110x_STAT1]);
-
-	for (i = 0; i < TRIALS; i++) {
-		stv6110x_read_reg(stv6110x, STV6110x_STAT1, &stv6110x->regs[STV6110x_STAT1]);
-		if (!STV6110x_GETFIELD(STAT1_CALVCO_STRT, stv6110x->regs[STV6110x_STAT1]))
-				break;
-		msleep(1);
-	}
-
-	return 0;
-}
-
-static int stv6110x_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
-	struct stv6110x_state *stv6110x = fe->tuner_priv;
-
-	stv6110x_read_reg(stv6110x, STV6110x_TNG1, &stv6110x->regs[STV6110x_TNG1]);
-	stv6110x_read_reg(stv6110x, STV6110x_TNG0, &stv6110x->regs[STV6110x_TNG0]);
-
-	*frequency = (MAKEWORD16(STV6110x_GETFIELD(TNG1_N_DIV_11_8, stv6110x->regs[STV6110x_TNG1]),
-				 STV6110x_GETFIELD(TNG0_N_DIV_7_0, stv6110x->regs[STV6110x_TNG0]))) * REFCLOCK_kHz;
-
-	*frequency /= (1 << (STV6110x_GETFIELD(TNG1_R_DIV, stv6110x->regs[STV6110x_TNG1]) +
-			     STV6110x_GETFIELD(TNG1_DIV4SEL, stv6110x->regs[STV6110x_TNG1])));
-
-	*frequency >>= 2;
-
-	return 0;
-}
-
-static int stv6110x_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth)
-{
-	struct stv6110x_state *stv6110x = fe->tuner_priv;
-	u32 halfbw;
-	u8 i;
-
-	halfbw = bandwidth >> 1;
-
-	if (halfbw > 36000000)
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL3], CTRL3_CF, 31); /* LPF */
-	else if (halfbw < 5000000)
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL3], CTRL3_CF, 0); /* LPF */
-	else
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL3], CTRL3_CF, ((halfbw / 1000000) - 5)); /* LPF */
-
-
-	STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL3], CTRL3_RCCLK_OFF, 0x0); /* cal. clk activated */
-	STV6110x_SETFIELD(stv6110x->regs[STV6110x_STAT1], STAT1_CALRC_STRT, 0x1); /* LPF auto cal */
-
-	stv6110x_write_reg(stv6110x, STV6110x_CTRL3, stv6110x->regs[STV6110x_CTRL3]);
-	stv6110x_write_reg(stv6110x, STV6110x_STAT1, stv6110x->regs[STV6110x_STAT1]);
-
-	for (i = 0; i < TRIALS; i++) {
-		stv6110x_read_reg(stv6110x, STV6110x_STAT1, &stv6110x->regs[STV6110x_STAT1]);
-		if (!STV6110x_GETFIELD(STAT1_CALRC_STRT, stv6110x->regs[STV6110x_STAT1]))
-			break;
-		msleep(1);
-	}
-	STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL3], CTRL3_RCCLK_OFF, 0x1); /* cal. done */
-	stv6110x_write_reg(stv6110x, STV6110x_CTRL3, stv6110x->regs[STV6110x_CTRL3]);
-
-	return 0;
-}
-
-static int stv6110x_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
-{
-	struct stv6110x_state *stv6110x = fe->tuner_priv;
-
-	stv6110x_read_reg(stv6110x, STV6110x_CTRL3, &stv6110x->regs[STV6110x_CTRL3]);
-	*bandwidth = (STV6110x_GETFIELD(CTRL3_CF, stv6110x->regs[STV6110x_CTRL3]) + 5) * 2000000;
-
-	return 0;
-}
-
-static int stv6110x_set_refclock(struct dvb_frontend *fe, u32 refclock)
-{
-	struct stv6110x_state *stv6110x = fe->tuner_priv;
-
-	/* setup divider */
-	switch (refclock) {
-	default:
-	case 1:
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 0);
-		break;
-	case 2:
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 1);
-		break;
-	case 4:
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 2);
-		break;
-	case 8:
-	case 0:
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 3);
-		break;
-	}
-	stv6110x_write_reg(stv6110x, STV6110x_CTRL2, stv6110x->regs[STV6110x_CTRL2]);
-
-	return 0;
-}
-
-static int stv6110x_get_bbgain(struct dvb_frontend *fe, u32 *gain)
-{
-	struct stv6110x_state *stv6110x = fe->tuner_priv;
-
-	stv6110x_read_reg(stv6110x, STV6110x_CTRL2, &stv6110x->regs[STV6110x_CTRL2]);
-	*gain = 2 * STV6110x_GETFIELD(CTRL2_BBGAIN, stv6110x->regs[STV6110x_CTRL2]);
-
-	return 0;
-}
-
-static int stv6110x_set_bbgain(struct dvb_frontend *fe, u32 gain)
-{
-	struct stv6110x_state *stv6110x = fe->tuner_priv;
-
-	STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_BBGAIN, gain / 2);
-	stv6110x_write_reg(stv6110x, STV6110x_CTRL2, stv6110x->regs[STV6110x_CTRL2]);
-
-	return 0;
-}
-
-static int stv6110x_set_mode(struct dvb_frontend *fe, enum tuner_mode mode)
-{
-	struct stv6110x_state *stv6110x = fe->tuner_priv;
-	int ret;
-
-	switch (mode) {
-	case TUNER_SLEEP:
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_SYN, 0);
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_RX, 0);
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_LPT, 0);
-		break;
-
-	case TUNER_WAKE:
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_SYN, 1);
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_RX, 1);
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_LPT, 1);
-		break;
-	}
-
-	ret = stv6110x_write_reg(stv6110x, STV6110x_CTRL1, stv6110x->regs[STV6110x_CTRL1]);
-	if (ret < 0) {
-		dprintk(FE_ERROR, 1, "I/O Error");
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static int stv6110x_sleep(struct dvb_frontend *fe)
-{
-	if (fe->tuner_priv)
-		return stv6110x_set_mode(fe, TUNER_SLEEP);
-
-	return 0;
-}
-
-static int stv6110x_get_status(struct dvb_frontend *fe, u32 *status)
-{
-	struct stv6110x_state *stv6110x = fe->tuner_priv;
-
-	stv6110x_read_reg(stv6110x, STV6110x_STAT1, &stv6110x->regs[STV6110x_STAT1]);
-
-	if (STV6110x_GETFIELD(STAT1_LOCK, stv6110x->regs[STV6110x_STAT1]))
-		*status = TUNER_PHASELOCKED;
-	else
-		*status = 0;
-
-	return 0;
-}
-
-
-static int stv6110x_release(struct dvb_frontend *fe)
-{
-	struct stv6110x_state *stv6110x = fe->tuner_priv;
-
-	fe->tuner_priv = NULL;
-	kfree(stv6110x);
-
-	return 0;
-}
-
-static struct dvb_tuner_ops stv6110x_ops = {
-	.info = {
-		.name		= "STV6110(A) Silicon Tuner",
-		.frequency_min	=  950000,
-		.frequency_max	= 2150000,
-		.frequency_step	= 0,
-	},
-	.release		= stv6110x_release
-};
-
-static struct stv6110x_devctl stv6110x_ctl = {
-	.tuner_init		= stv6110x_init,
-	.tuner_sleep		= stv6110x_sleep,
-	.tuner_set_mode		= stv6110x_set_mode,
-	.tuner_set_frequency	= stv6110x_set_frequency,
-	.tuner_get_frequency	= stv6110x_get_frequency,
-	.tuner_set_bandwidth	= stv6110x_set_bandwidth,
-	.tuner_get_bandwidth	= stv6110x_get_bandwidth,
-	.tuner_set_bbgain	= stv6110x_set_bbgain,
-	.tuner_get_bbgain	= stv6110x_get_bbgain,
-	.tuner_set_refclk	= stv6110x_set_refclock,
-	.tuner_get_status	= stv6110x_get_status,
-};
-
-struct stv6110x_devctl *stv6110x_attach(struct dvb_frontend *fe,
-					const struct stv6110x_config *config,
-					struct i2c_adapter *i2c)
-{
-	struct stv6110x_state *stv6110x;
-	u8 default_regs[] = {0x07, 0x11, 0xdc, 0x85, 0x17, 0x01, 0xe6, 0x1e};
-
-	stv6110x = kzalloc(sizeof (struct stv6110x_state), GFP_KERNEL);
-	if (!stv6110x)
-		return NULL;
-
-	stv6110x->i2c		= i2c;
-	stv6110x->config	= config;
-	stv6110x->devctl	= &stv6110x_ctl;
-	memcpy(stv6110x->regs, default_regs, 8);
-
-	/* setup divider */
-	switch (stv6110x->config->clk_div) {
-	default:
-	case 1:
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 0);
-		break;
-	case 2:
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 1);
-		break;
-	case 4:
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 2);
-		break;
-	case 8:
-	case 0:
-		STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 3);
-		break;
-	}
-
-	fe->tuner_priv		= stv6110x;
-	fe->ops.tuner_ops	= stv6110x_ops;
-
-	printk(KERN_INFO "%s: Attaching STV6110x\n", __func__);
-	return stv6110x->devctl;
-}
-EXPORT_SYMBOL(stv6110x_attach);
-
-MODULE_AUTHOR("Manu Abraham");
-MODULE_DESCRIPTION("STV6110x Silicon tuner");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/stv6110x.h b/drivers/media/dvb/frontends/stv6110x.h
deleted file mode 100644
index 47516753..0000000
--- a/drivers/media/dvb/frontends/stv6110x.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
-	STV6110(A) Silicon tuner driver
-
-	Copyright (C) Manu Abraham <abraham.manu@gmail.com>
-
-	Copyright (C) ST Microelectronics
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __STV6110x_H
-#define __STV6110x_H
-
-struct stv6110x_config {
-	u8	addr;
-	u32	refclk;
-	u8	clk_div; /* divisor value for the output clock */
-};
-
-enum tuner_mode {
-	TUNER_SLEEP = 1,
-	TUNER_WAKE,
-};
-
-enum tuner_status {
-	TUNER_PHASELOCKED = 1,
-};
-
-struct stv6110x_devctl {
-	int (*tuner_init) (struct dvb_frontend *fe);
-	int (*tuner_sleep) (struct dvb_frontend *fe);
-	int (*tuner_set_mode) (struct dvb_frontend *fe, enum tuner_mode mode);
-	int (*tuner_set_frequency) (struct dvb_frontend *fe, u32 frequency);
-	int (*tuner_get_frequency) (struct dvb_frontend *fe, u32 *frequency);
-	int (*tuner_set_bandwidth) (struct dvb_frontend *fe, u32 bandwidth);
-	int (*tuner_get_bandwidth) (struct dvb_frontend *fe, u32 *bandwidth);
-	int (*tuner_set_bbgain) (struct dvb_frontend *fe, u32 gain);
-	int (*tuner_get_bbgain) (struct dvb_frontend *fe, u32 *gain);
-	int (*tuner_set_refclk)  (struct dvb_frontend *fe, u32 refclk);
-	int (*tuner_get_status) (struct dvb_frontend *fe, u32 *status);
-};
-
-
-#if defined(CONFIG_DVB_STV6110x) || (defined(CONFIG_DVB_STV6110x_MODULE) && defined(MODULE))
-
-extern struct stv6110x_devctl *stv6110x_attach(struct dvb_frontend *fe,
-					       const struct stv6110x_config *config,
-					       struct i2c_adapter *i2c);
-
-#else
-static inline struct stv6110x_devctl *stv6110x_attach(struct dvb_frontend *fe,
-						      const struct stv6110x_config *config,
-						      struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-#endif /* CONFIG_DVB_STV6110x */
-
-#endif /* __STV6110x_H */
diff --git a/drivers/media/dvb/frontends/stv6110x_priv.h b/drivers/media/dvb/frontends/stv6110x_priv.h
deleted file mode 100644
index 0ec936a..0000000
--- a/drivers/media/dvb/frontends/stv6110x_priv.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
-	STV6110(A) Silicon tuner driver
-
-	Copyright (C) Manu Abraham <abraham.manu@gmail.com>
-
-	Copyright (C) ST Microelectronics
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __STV6110x_PRIV_H
-#define __STV6110x_PRIV_H
-
-#define FE_ERROR				0
-#define FE_NOTICE				1
-#define FE_INFO					2
-#define FE_DEBUG				3
-#define FE_DEBUGREG				4
-
-#define dprintk(__y, __z, format, arg...) do {						\
-	if (__z) {									\
-		if	((verbose > FE_ERROR) && (verbose > __y))			\
-			printk(KERN_ERR "%s: " format "\n", __func__ , ##arg);		\
-		else if	((verbose > FE_NOTICE) && (verbose > __y))			\
-			printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg);	\
-		else if ((verbose > FE_INFO) && (verbose > __y))			\
-			printk(KERN_INFO "%s: " format "\n", __func__ , ##arg);		\
-		else if ((verbose > FE_DEBUG) && (verbose > __y))			\
-			printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg);	\
-	} else {									\
-		if (verbose > __y)							\
-			printk(format, ##arg);						\
-	}										\
-} while (0)
-
-
-#define STV6110x_SETFIELD(mask, bitf, val)				\
-	(mask = (mask & (~(((1 << STV6110x_WIDTH_##bitf) - 1) <<	\
-				  STV6110x_OFFST_##bitf))) | 		\
-			  (val << STV6110x_OFFST_##bitf))
-
-#define STV6110x_GETFIELD(bitf, val)					\
-	((val >> STV6110x_OFFST_##bitf) & 				\
-	((1 << STV6110x_WIDTH_##bitf) - 1))
-
-#define MAKEWORD16(a, b)			(((a) << 8) | (b))
-
-#define LSB(x)					((x & 0xff))
-#define MSB(y)					((y >> 8) & 0xff)
-
-#define TRIALS					10
-#define R_DIV(__div)				(1 << (__div + 1))
-#define REFCLOCK_kHz				(stv6110x->config->refclk /    1000)
-#define REFCLOCK_MHz				(stv6110x->config->refclk / 1000000)
-
-struct stv6110x_state {
-	struct i2c_adapter		*i2c;
-	const struct stv6110x_config	*config;
-	u8 				regs[8];
-
-	struct stv6110x_devctl		*devctl;
-};
-
-#endif /* __STV6110x_PRIV_H */
diff --git a/drivers/media/dvb/frontends/stv6110x_reg.h b/drivers/media/dvb/frontends/stv6110x_reg.h
deleted file mode 100644
index 93e5c70..0000000
--- a/drivers/media/dvb/frontends/stv6110x_reg.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
-	STV6110(A) Silicon tuner driver
-
-	Copyright (C) Manu Abraham <abraham.manu@gmail.com>
-
-	Copyright (C) ST Microelectronics
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __STV6110x_REG_H
-#define __STV6110x_REG_H
-
-#define STV6110x_CTRL1				0x00
-#define STV6110x_OFFST_CTRL1_K			3
-#define STV6110x_WIDTH_CTRL1_K			5
-#define STV6110x_OFFST_CTRL1_LPT		2
-#define STV6110x_WIDTH_CTRL1_LPT		1
-#define STV6110x_OFFST_CTRL1_RX			1
-#define STV6110x_WIDTH_CTRL1_RX			1
-#define STV6110x_OFFST_CTRL1_SYN		0
-#define STV6110x_WIDTH_CTRL1_SYN		1
-
-#define STV6110x_CTRL2				0x01
-#define STV6110x_OFFST_CTRL2_CO_DIV		6
-#define STV6110x_WIDTH_CTRL2_CO_DIV		2
-#define STV6110x_OFFST_CTRL2_RSVD		5
-#define STV6110x_WIDTH_CTRL2_RSVD		1
-#define STV6110x_OFFST_CTRL2_REFOUT_SEL		4
-#define STV6110x_WIDTH_CTRL2_REFOUT_SEL		1
-#define STV6110x_OFFST_CTRL2_BBGAIN		0
-#define STV6110x_WIDTH_CTRL2_BBGAIN		4
-
-#define STV6110x_TNG0				0x02
-#define STV6110x_OFFST_TNG0_N_DIV_7_0		0
-#define STV6110x_WIDTH_TNG0_N_DIV_7_0		8
-
-#define STV6110x_TNG1				0x03
-#define STV6110x_OFFST_TNG1_R_DIV		6
-#define STV6110x_WIDTH_TNG1_R_DIV		2
-#define STV6110x_OFFST_TNG1_PRESC32_ON		5
-#define STV6110x_WIDTH_TNG1_PRESC32_ON		1
-#define STV6110x_OFFST_TNG1_DIV4SEL		4
-#define STV6110x_WIDTH_TNG1_DIV4SEL		1
-#define STV6110x_OFFST_TNG1_N_DIV_11_8		0
-#define STV6110x_WIDTH_TNG1_N_DIV_11_8		4
-
-
-#define STV6110x_CTRL3				0x04
-#define STV6110x_OFFST_CTRL3_DCLOOP_OFF		7
-#define STV6110x_WIDTH_CTRL3_DCLOOP_OFF		1
-#define STV6110x_OFFST_CTRL3_RCCLK_OFF		6
-#define STV6110x_WIDTH_CTRL3_RCCLK_OFF		1
-#define STV6110x_OFFST_CTRL3_ICP		5
-#define STV6110x_WIDTH_CTRL3_ICP		1
-#define STV6110x_OFFST_CTRL3_CF			0
-#define STV6110x_WIDTH_CTRL3_CF			5
-
-#define STV6110x_STAT1				0x05
-#define STV6110x_OFFST_STAT1_CALVCO_STRT	2
-#define STV6110x_WIDTH_STAT1_CALVCO_STRT	1
-#define STV6110x_OFFST_STAT1_CALRC_STRT		1
-#define STV6110x_WIDTH_STAT1_CALRC_STRT		1
-#define STV6110x_OFFST_STAT1_LOCK		0
-#define STV6110x_WIDTH_STAT1_LOCK		1
-
-#define STV6110x_STAT2				0x06
-#define STV6110x_STAT3				0x07
-
-#endif /* __STV6110x_REG_H */
diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c
deleted file mode 100644
index 1bff7f4..0000000
--- a/drivers/media/dvb/frontends/tda10021.c
+++ /dev/null
@@ -1,528 +0,0 @@
-/*
-    TDA10021  - Single Chip Cable Channel Receiver driver module
-	       used on the Siemens DVB-C cards
-
-    Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
-    Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
-		   Support for TDA10021
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "tda1002x.h"
-
-
-struct tda10021_state {
-	struct i2c_adapter* i2c;
-	/* configuration settings */
-	const struct tda1002x_config* config;
-	struct dvb_frontend frontend;
-
-	u8 pwm;
-	u8 reg0;
-};
-
-
-#if 0
-#define dprintk(x...) printk(x)
-#else
-#define dprintk(x...)
-#endif
-
-static int verbose;
-
-#define XIN 57840000UL
-
-#define FIN (XIN >> 4)
-
-static int tda10021_inittab_size = 0x40;
-static u8 tda10021_inittab[0x40]=
-{
-	0x73, 0x6a, 0x23, 0x0a, 0x02, 0x37, 0x77, 0x1a,
-	0x37, 0x6a, 0x17, 0x8a, 0x1e, 0x86, 0x43, 0x40,
-	0xb8, 0x3f, 0xa1, 0x00, 0xcd, 0x01, 0x00, 0xff,
-	0x11, 0x00, 0x7c, 0x31, 0x30, 0x20, 0x00, 0x00,
-	0x02, 0x00, 0x00, 0x7d, 0x00, 0x00, 0x00, 0x00,
-	0x07, 0x00, 0x33, 0x11, 0x0d, 0x95, 0x08, 0x58,
-	0x00, 0x00, 0x80, 0x00, 0x80, 0xff, 0x00, 0x00,
-	0x04, 0x2d, 0x2f, 0xff, 0x00, 0x00, 0x00, 0x00,
-};
-
-static int _tda10021_writereg (struct tda10021_state* state, u8 reg, u8 data)
-{
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
-	int ret;
-
-	ret = i2c_transfer (state->i2c, &msg, 1);
-	if (ret != 1)
-		printk("DVB: TDA10021(%d): %s, writereg error "
-			"(reg == 0x%02x, val == 0x%02x, ret == %i)\n",
-			state->frontend.dvb->num, __func__, reg, data, ret);
-
-	msleep(10);
-	return (ret != 1) ? -EREMOTEIO : 0;
-}
-
-static u8 tda10021_readreg (struct tda10021_state* state, u8 reg)
-{
-	u8 b0 [] = { reg };
-	u8 b1 [] = { 0 };
-	struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
-				  { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
-	int ret;
-
-	ret = i2c_transfer (state->i2c, msg, 2);
-	// Don't print an error message if the id is read.
-	if (ret != 2 && reg != 0x1a)
-		printk("DVB: TDA10021: %s: readreg error (ret == %i)\n",
-				__func__, ret);
-	return b1[0];
-}
-
-//get access to tuner
-static int lock_tuner(struct tda10021_state* state)
-{
-	u8 buf[2] = { 0x0f, tda10021_inittab[0x0f] | 0x80 };
-	struct i2c_msg msg = {.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2};
-
-	if(i2c_transfer(state->i2c, &msg, 1) != 1)
-	{
-		printk("tda10021: lock tuner fails\n");
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-
-//release access from tuner
-static int unlock_tuner(struct tda10021_state* state)
-{
-	u8 buf[2] = { 0x0f, tda10021_inittab[0x0f] & 0x7f };
-	struct i2c_msg msg_post={.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2};
-
-	if(i2c_transfer(state->i2c, &msg_post, 1) != 1)
-	{
-		printk("tda10021: unlock tuner fails\n");
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-
-static int tda10021_setup_reg0 (struct tda10021_state* state, u8 reg0,
-				fe_spectral_inversion_t inversion)
-{
-	reg0 |= state->reg0 & 0x63;
-
-	if ((INVERSION_ON == inversion) ^ (state->config->invert == 0))
-		reg0 &= ~0x20;
-	else
-		reg0 |= 0x20;
-
-	_tda10021_writereg (state, 0x00, reg0 & 0xfe);
-	_tda10021_writereg (state, 0x00, reg0 | 0x01);
-
-	state->reg0 = reg0;
-	return 0;
-}
-
-static int tda10021_set_symbolrate (struct tda10021_state* state, u32 symbolrate)
-{
-	s32 BDR;
-	s32 BDRI;
-	s16 SFIL=0;
-	u16 NDEC = 0;
-	u32 tmp, ratio;
-
-	if (symbolrate > XIN/2)
-		symbolrate = XIN/2;
-	if (symbolrate < 500000)
-		symbolrate = 500000;
-
-	if (symbolrate < XIN/16) NDEC = 1;
-	if (symbolrate < XIN/32) NDEC = 2;
-	if (symbolrate < XIN/64) NDEC = 3;
-
-	if (symbolrate < (u32)(XIN/12.3)) SFIL = 1;
-	if (symbolrate < (u32)(XIN/16))	 SFIL = 0;
-	if (symbolrate < (u32)(XIN/24.6)) SFIL = 1;
-	if (symbolrate < (u32)(XIN/32))	 SFIL = 0;
-	if (symbolrate < (u32)(XIN/49.2)) SFIL = 1;
-	if (symbolrate < (u32)(XIN/64))	 SFIL = 0;
-	if (symbolrate < (u32)(XIN/98.4)) SFIL = 1;
-
-	symbolrate <<= NDEC;
-	ratio = (symbolrate << 4) / FIN;
-	tmp =  ((symbolrate << 4) % FIN) << 8;
-	ratio = (ratio << 8) + tmp / FIN;
-	tmp = (tmp % FIN) << 8;
-	ratio = (ratio << 8) + DIV_ROUND_CLOSEST(tmp, FIN);
-
-	BDR = ratio;
-	BDRI = (((XIN << 5) / symbolrate) + 1) / 2;
-
-	if (BDRI > 0xFF)
-		BDRI = 0xFF;
-
-	SFIL = (SFIL << 4) | tda10021_inittab[0x0E];
-
-	NDEC = (NDEC << 6) | tda10021_inittab[0x03];
-
-	_tda10021_writereg (state, 0x03, NDEC);
-	_tda10021_writereg (state, 0x0a, BDR&0xff);
-	_tda10021_writereg (state, 0x0b, (BDR>> 8)&0xff);
-	_tda10021_writereg (state, 0x0c, (BDR>>16)&0x3f);
-
-	_tda10021_writereg (state, 0x0d, BDRI);
-	_tda10021_writereg (state, 0x0e, SFIL);
-
-	return 0;
-}
-
-static int tda10021_init (struct dvb_frontend *fe)
-{
-	struct tda10021_state* state = fe->demodulator_priv;
-	int i;
-
-	dprintk("DVB: TDA10021(%d): init chip\n", fe->adapter->num);
-
-	//_tda10021_writereg (fe, 0, 0);
-
-	for (i=0; i<tda10021_inittab_size; i++)
-		_tda10021_writereg (state, i, tda10021_inittab[i]);
-
-	_tda10021_writereg (state, 0x34, state->pwm);
-
-	//Comment by markus
-	//0x2A[3-0] == PDIV -> P multiplaying factor (P=PDIV+1)(default 0)
-	//0x2A[4] == BYPPLL -> Power down mode (default 1)
-	//0x2A[5] == LCK -> PLL Lock Flag
-	//0x2A[6] == POLAXIN -> Polarity of the input reference clock (default 0)
-
-	//Activate PLL
-	_tda10021_writereg(state, 0x2a, tda10021_inittab[0x2a] & 0xef);
-	return 0;
-}
-
-struct qam_params {
-	u8 conf, agcref, lthr, mseth, aref;
-};
-
-static int tda10021_set_parameters(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	u32 delsys  = c->delivery_system;
-	unsigned qam = c->modulation;
-	bool is_annex_c;
-	u32 reg0x3d;
-	struct tda10021_state* state = fe->demodulator_priv;
-	static const struct qam_params qam_params[] = {
-		/* Modulation  Conf  AGCref  LTHR  MSETH  AREF */
-		[QPSK]	   = { 0x14, 0x78,   0x78, 0x8c,  0x96 },
-		[QAM_16]   = { 0x00, 0x8c,   0x87, 0xa2,  0x91 },
-		[QAM_32]   = { 0x04, 0x8c,   0x64, 0x74,  0x96 },
-		[QAM_64]   = { 0x08, 0x6a,   0x46, 0x43,  0x6a },
-		[QAM_128]  = { 0x0c, 0x78,   0x36, 0x34,  0x7e },
-		[QAM_256]  = { 0x10, 0x5c,   0x26, 0x23,  0x6b },
-	};
-
-	switch (delsys) {
-	case SYS_DVBC_ANNEX_A:
-		is_annex_c = false;
-		break;
-	case SYS_DVBC_ANNEX_C:
-		is_annex_c = true;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/*
-	 * gcc optimizes the code bellow the same way as it would code:
-	 *           "if (qam > 5) return -EINVAL;"
-	 * Yet, the code is clearer, as it shows what QAM standards are
-	 * supported by the driver, and avoids the usage of magic numbers on
-	 * it.
-	 */
-	switch (qam) {
-	case QPSK:
-	case QAM_16:
-	case QAM_32:
-	case QAM_64:
-	case QAM_128:
-	case QAM_256:
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (c->inversion != INVERSION_ON && c->inversion != INVERSION_OFF)
-		return -EINVAL;
-
-	/*printk("tda10021: set frequency to %d qam=%d symrate=%d\n", p->frequency,qam,p->symbol_rate);*/
-
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	tda10021_set_symbolrate(state, c->symbol_rate);
-	_tda10021_writereg(state, 0x34, state->pwm);
-
-	_tda10021_writereg(state, 0x01, qam_params[qam].agcref);
-	_tda10021_writereg(state, 0x05, qam_params[qam].lthr);
-	_tda10021_writereg(state, 0x08, qam_params[qam].mseth);
-	_tda10021_writereg(state, 0x09, qam_params[qam].aref);
-
-	/*
-	 * Bit 0 == 0 means roll-off = 0.15 (Annex A)
-	 *	 == 1 means roll-off = 0.13 (Annex C)
-	 */
-	reg0x3d = tda10021_readreg (state, 0x3d);
-	if (is_annex_c)
-		_tda10021_writereg (state, 0x3d, 0x01 | reg0x3d);
-	else
-		_tda10021_writereg (state, 0x3d, 0xfe & reg0x3d);
-	tda10021_setup_reg0(state, qam_params[qam].conf, c->inversion);
-
-	return 0;
-}
-
-static int tda10021_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct tda10021_state* state = fe->demodulator_priv;
-	int sync;
-
-	*status = 0;
-	//0x11[0] == EQALGO -> Equalizer algorithms state
-	//0x11[1] == CARLOCK -> Carrier locked
-	//0x11[2] == FSYNC -> Frame synchronisation
-	//0x11[3] == FEL -> Front End locked
-	//0x11[6] == NODVB -> DVB Mode Information
-	sync = tda10021_readreg (state, 0x11);
-
-	if (sync & 2)
-		*status |= FE_HAS_SIGNAL|FE_HAS_CARRIER;
-
-	if (sync & 4)
-		*status |= FE_HAS_SYNC|FE_HAS_VITERBI;
-
-	if (sync & 8)
-		*status |= FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int tda10021_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct tda10021_state* state = fe->demodulator_priv;
-
-	u32 _ber = tda10021_readreg(state, 0x14) |
-		(tda10021_readreg(state, 0x15) << 8) |
-		((tda10021_readreg(state, 0x16) & 0x0f) << 16);
-	_tda10021_writereg(state, 0x10, (tda10021_readreg(state, 0x10) & ~0xc0)
-					| (tda10021_inittab[0x10] & 0xc0));
-	*ber = 10 * _ber;
-
-	return 0;
-}
-
-static int tda10021_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	struct tda10021_state* state = fe->demodulator_priv;
-
-	u8 config = tda10021_readreg(state, 0x02);
-	u8 gain = tda10021_readreg(state, 0x17);
-	if (config & 0x02)
-		/* the agc value is inverted */
-		gain = ~gain;
-	*strength = (gain << 8) | gain;
-
-	return 0;
-}
-
-static int tda10021_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct tda10021_state* state = fe->demodulator_priv;
-
-	u8 quality = ~tda10021_readreg(state, 0x18);
-	*snr = (quality << 8) | quality;
-
-	return 0;
-}
-
-static int tda10021_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct tda10021_state* state = fe->demodulator_priv;
-
-	*ucblocks = tda10021_readreg (state, 0x13) & 0x7f;
-	if (*ucblocks == 0x7f)
-		*ucblocks = 0xffffffff;
-
-	/* reset uncorrected block counter */
-	_tda10021_writereg (state, 0x10, tda10021_inittab[0x10] & 0xdf);
-	_tda10021_writereg (state, 0x10, tda10021_inittab[0x10]);
-
-	return 0;
-}
-
-static int tda10021_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct tda10021_state* state = fe->demodulator_priv;
-	int sync;
-	s8 afc = 0;
-
-	sync = tda10021_readreg(state, 0x11);
-	afc = tda10021_readreg(state, 0x19);
-	if (verbose) {
-		/* AFC only valid when carrier has been recovered */
-		printk(sync & 2 ? "DVB: TDA10021(%d): AFC (%d) %dHz\n" :
-				  "DVB: TDA10021(%d): [AFC (%d) %dHz]\n",
-			state->frontend.dvb->num, afc,
-		       -((s32)p->symbol_rate * afc) >> 10);
-	}
-
-	p->inversion = ((state->reg0 & 0x20) == 0x20) ^ (state->config->invert != 0) ? INVERSION_ON : INVERSION_OFF;
-	p->modulation = ((state->reg0 >> 2) & 7) + QAM_16;
-
-	p->fec_inner = FEC_NONE;
-	p->frequency = ((p->frequency + 31250) / 62500) * 62500;
-
-	if (sync & 2)
-		p->frequency -= ((s32)p->symbol_rate * afc) >> 10;
-
-	return 0;
-}
-
-static int tda10021_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
-{
-	struct tda10021_state* state = fe->demodulator_priv;
-
-	if (enable) {
-		lock_tuner(state);
-	} else {
-		unlock_tuner(state);
-	}
-	return 0;
-}
-
-static int tda10021_sleep(struct dvb_frontend* fe)
-{
-	struct tda10021_state* state = fe->demodulator_priv;
-
-	_tda10021_writereg (state, 0x1b, 0x02);  /* pdown ADC */
-	_tda10021_writereg (state, 0x00, 0x80);  /* standby */
-
-	return 0;
-}
-
-static void tda10021_release(struct dvb_frontend* fe)
-{
-	struct tda10021_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops tda10021_ops;
-
-struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config,
-				     struct i2c_adapter* i2c,
-				     u8 pwm)
-{
-	struct tda10021_state* state = NULL;
-	u8 id;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct tda10021_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->pwm = pwm;
-	state->reg0 = tda10021_inittab[0];
-
-	/* check if the demod is there */
-	id = tda10021_readreg(state, 0x1a);
-	if ((id & 0xf0) != 0x70) goto error;
-
-	/* Don't claim TDA10023 */
-	if (id == 0x7d)
-		goto error;
-
-	printk("TDA10021: i2c-addr = 0x%02x, id = 0x%02x\n",
-	       state->config->demod_address, id);
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &tda10021_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops tda10021_ops = {
-	.delsys = { SYS_DVBC_ANNEX_A, SYS_DVBC_ANNEX_C },
-	.info = {
-		.name = "Philips TDA10021 DVB-C",
-		.frequency_stepsize = 62500,
-		.frequency_min = 47000000,
-		.frequency_max = 862000000,
-		.symbol_rate_min = (XIN/2)/64,     /* SACLK/64 == (XIN/2)/64 */
-		.symbol_rate_max = (XIN/2)/4,      /* SACLK/4 */
-	#if 0
-		.frequency_tolerance = ???,
-		.symbol_rate_tolerance = ???,  /* ppm */  /* == 8% (spec p. 5) */
-	#endif
-		.caps = 0x400 | //FE_CAN_QAM_4
-			FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 |
-			FE_CAN_QAM_128 | FE_CAN_QAM_256 |
-			FE_CAN_FEC_AUTO
-	},
-
-	.release = tda10021_release,
-
-	.init = tda10021_init,
-	.sleep = tda10021_sleep,
-	.i2c_gate_ctrl = tda10021_i2c_gate_ctrl,
-
-	.set_frontend = tda10021_set_parameters,
-	.get_frontend = tda10021_get_frontend,
-
-	.read_status = tda10021_read_status,
-	.read_ber = tda10021_read_ber,
-	.read_signal_strength = tda10021_read_signal_strength,
-	.read_snr = tda10021_read_snr,
-	.read_ucblocks = tda10021_read_ucblocks,
-};
-
-module_param(verbose, int, 0644);
-MODULE_PARM_DESC(verbose, "print AFC offset after tuning for debugging the PWM setting");
-
-MODULE_DESCRIPTION("Philips TDA10021 DVB-C demodulator driver");
-MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Markus Schulz");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(tda10021_attach);
diff --git a/drivers/media/dvb/frontends/tda10023.c b/drivers/media/dvb/frontends/tda10023.c
deleted file mode 100644
index ca1e0d5..0000000
--- a/drivers/media/dvb/frontends/tda10023.c
+++ /dev/null
@@ -1,610 +0,0 @@
-/*
-    TDA10023  - DVB-C decoder
-    (as used in Philips CU1216-3 NIM and the Reelbox DVB-C tuner card)
-
-    Copyright (C) 2005 Georg Acher, BayCom GmbH (acher at baycom dot de)
-    Copyright (c) 2006 Hartmut Birr (e9hack at gmail dot com)
-
-    Remotely based on tda10021.c
-    Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
-    Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
-		   Support for TDA10021
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include <asm/div64.h>
-
-#include "dvb_frontend.h"
-#include "tda1002x.h"
-
-#define REG0_INIT_VAL 0x23
-
-struct tda10023_state {
-	struct i2c_adapter* i2c;
-	/* configuration settings */
-	const struct tda10023_config *config;
-	struct dvb_frontend frontend;
-
-	u8 pwm;
-	u8 reg0;
-
-	/* clock settings */
-	u32 xtal;
-	u8 pll_m;
-	u8 pll_p;
-	u8 pll_n;
-	u32 sysclk;
-};
-
-#define dprintk(x...)
-
-static int verbose;
-
-static u8 tda10023_readreg (struct tda10023_state* state, u8 reg)
-{
-	u8 b0 [] = { reg };
-	u8 b1 [] = { 0 };
-	struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
-				  { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
-	int ret;
-
-	ret = i2c_transfer (state->i2c, msg, 2);
-	if (ret != 2) {
-		int num = state->frontend.dvb ? state->frontend.dvb->num : -1;
-		printk(KERN_ERR "DVB: TDA10023(%d): %s: readreg error "
-			"(reg == 0x%02x, ret == %i)\n",
-			num, __func__, reg, ret);
-	}
-	return b1[0];
-}
-
-static int tda10023_writereg (struct tda10023_state* state, u8 reg, u8 data)
-{
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
-	int ret;
-
-	ret = i2c_transfer (state->i2c, &msg, 1);
-	if (ret != 1) {
-		int num = state->frontend.dvb ? state->frontend.dvb->num : -1;
-		printk(KERN_ERR "DVB: TDA10023(%d): %s, writereg error "
-			"(reg == 0x%02x, val == 0x%02x, ret == %i)\n",
-			num, __func__, reg, data, ret);
-	}
-	return (ret != 1) ? -EREMOTEIO : 0;
-}
-
-
-static int tda10023_writebit (struct tda10023_state* state, u8 reg, u8 mask,u8 data)
-{
-	if (mask==0xff)
-		return tda10023_writereg(state, reg, data);
-	else {
-		u8 val;
-		val=tda10023_readreg(state,reg);
-		val&=~mask;
-		val|=(data&mask);
-		return tda10023_writereg(state, reg, val);
-	}
-}
-
-static void tda10023_writetab(struct tda10023_state* state, u8* tab)
-{
-	u8 r,m,v;
-	while (1) {
-		r=*tab++;
-		m=*tab++;
-		v=*tab++;
-		if (r==0xff) {
-			if (m==0xff)
-				break;
-			else
-				msleep(m);
-		}
-		else
-			tda10023_writebit(state,r,m,v);
-	}
-}
-
-//get access to tuner
-static int lock_tuner(struct tda10023_state* state)
-{
-	u8 buf[2] = { 0x0f, 0xc0 };
-	struct i2c_msg msg = {.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2};
-
-	if(i2c_transfer(state->i2c, &msg, 1) != 1)
-	{
-		printk("tda10023: lock tuner fails\n");
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-
-//release access from tuner
-static int unlock_tuner(struct tda10023_state* state)
-{
-	u8 buf[2] = { 0x0f, 0x40 };
-	struct i2c_msg msg_post={.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2};
-
-	if(i2c_transfer(state->i2c, &msg_post, 1) != 1)
-	{
-		printk("tda10023: unlock tuner fails\n");
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-
-static int tda10023_setup_reg0 (struct tda10023_state* state, u8 reg0)
-{
-	reg0 |= state->reg0 & 0x63;
-
-	tda10023_writereg (state, 0x00, reg0 & 0xfe);
-	tda10023_writereg (state, 0x00, reg0 | 0x01);
-
-	state->reg0 = reg0;
-	return 0;
-}
-
-static int tda10023_set_symbolrate (struct tda10023_state* state, u32 sr)
-{
-	s32 BDR;
-	s32 BDRI;
-	s16 SFIL=0;
-	u16 NDEC = 0;
-
-	/* avoid floating point operations multiplying syscloc and divider
-	   by 10 */
-	u32 sysclk_x_10 = state->sysclk * 10;
-
-	if (sr < (u32)(sysclk_x_10/984)) {
-		NDEC=3;
-		SFIL=1;
-	} else if (sr < (u32)(sysclk_x_10/640)) {
-		NDEC=3;
-		SFIL=0;
-	} else if (sr < (u32)(sysclk_x_10/492)) {
-		NDEC=2;
-		SFIL=1;
-	} else if (sr < (u32)(sysclk_x_10/320)) {
-		NDEC=2;
-		SFIL=0;
-	} else if (sr < (u32)(sysclk_x_10/246)) {
-		NDEC=1;
-		SFIL=1;
-	} else if (sr < (u32)(sysclk_x_10/160)) {
-		NDEC=1;
-		SFIL=0;
-	} else if (sr < (u32)(sysclk_x_10/123)) {
-		NDEC=0;
-		SFIL=1;
-	}
-
-	BDRI = (state->sysclk)*16;
-	BDRI>>=NDEC;
-	BDRI +=sr/2;
-	BDRI /=sr;
-
-	if (BDRI>255)
-		BDRI=255;
-
-	{
-		u64 BDRX;
-
-		BDRX=1<<(24+NDEC);
-		BDRX*=sr;
-		do_div(BDRX, state->sysclk); 	/* BDRX/=SYSCLK; */
-
-		BDR=(s32)BDRX;
-	}
-	dprintk("Symbolrate %i, BDR %i BDRI %i, NDEC %i\n",
-		sr, BDR, BDRI, NDEC);
-	tda10023_writebit (state, 0x03, 0xc0, NDEC<<6);
-	tda10023_writereg (state, 0x0a, BDR&255);
-	tda10023_writereg (state, 0x0b, (BDR>>8)&255);
-	tda10023_writereg (state, 0x0c, (BDR>>16)&31);
-	tda10023_writereg (state, 0x0d, BDRI);
-	tda10023_writereg (state, 0x3d, (SFIL<<7));
-	return 0;
-}
-
-static int tda10023_init (struct dvb_frontend *fe)
-{
-	struct tda10023_state* state = fe->demodulator_priv;
-	u8 tda10023_inittab[] = {
-/*        reg  mask val */
-/* 000 */ 0x2a, 0xff, 0x02,  /* PLL3, Bypass, Power Down */
-/* 003 */ 0xff, 0x64, 0x00,  /* Sleep 100ms */
-/* 006 */ 0x2a, 0xff, 0x03,  /* PLL3, Bypass, Power Down */
-/* 009 */ 0xff, 0x64, 0x00,  /* Sleep 100ms */
-			   /* PLL1 */
-/* 012 */ 0x28, 0xff, (state->pll_m-1),
-			   /* PLL2 */
-/* 015 */ 0x29, 0xff, ((state->pll_p-1)<<6)|(state->pll_n-1),
-			   /* GPR FSAMPLING=1 */
-/* 018 */ 0x00, 0xff, REG0_INIT_VAL,
-/* 021 */ 0x2a, 0xff, 0x08,  /* PLL3 PSACLK=1 */
-/* 024 */ 0xff, 0x64, 0x00,  /* Sleep 100ms */
-/* 027 */ 0x1f, 0xff, 0x00,  /* RESET */
-/* 030 */ 0xff, 0x64, 0x00,  /* Sleep 100ms */
-/* 033 */ 0xe6, 0x0c, 0x04,  /* RSCFG_IND */
-/* 036 */ 0x10, 0xc0, 0x80,  /* DECDVBCFG1 PBER=1 */
-
-/* 039 */ 0x0e, 0xff, 0x82,  /* GAIN1 */
-/* 042 */ 0x03, 0x08, 0x08,  /* CLKCONF DYN=1 */
-/* 045 */ 0x2e, 0xbf, 0x30,  /* AGCCONF2 TRIAGC=0,POSAGC=ENAGCIF=1
-				       PPWMTUN=0 PPWMIF=0 */
-/* 048 */ 0x01, 0xff, 0x30,  /* AGCREF */
-/* 051 */ 0x1e, 0x84, 0x84,  /* CONTROL SACLK_ON=1 */
-/* 054 */ 0x1b, 0xff, 0xc8,  /* ADC TWOS=1 */
-/* 057 */ 0x3b, 0xff, 0xff,  /* IFMAX */
-/* 060 */ 0x3c, 0xff, 0x00,  /* IFMIN */
-/* 063 */ 0x34, 0xff, 0x00,  /* PWMREF */
-/* 066 */ 0x35, 0xff, 0xff,  /* TUNMAX */
-/* 069 */ 0x36, 0xff, 0x00,  /* TUNMIN */
-/* 072 */ 0x06, 0xff, 0x7f,  /* EQCONF1 POSI=7 ENADAPT=ENEQUAL=DFE=1 */
-/* 075 */ 0x1c, 0x30, 0x30,  /* EQCONF2 STEPALGO=SGNALGO=1 */
-/* 078 */ 0x37, 0xff, 0xf6,  /* DELTAF_LSB */
-/* 081 */ 0x38, 0xff, 0xff,  /* DELTAF_MSB */
-/* 084 */ 0x02, 0xff, 0x93,  /* AGCCONF1  IFS=1 KAGCIF=2 KAGCTUN=3 */
-/* 087 */ 0x2d, 0xff, 0xf6,  /* SWEEP SWPOS=1 SWDYN=7 SWSTEP=1 SWLEN=2 */
-/* 090 */ 0x04, 0x10, 0x00,  /* SWRAMP=1 */
-/* 093 */ 0x12, 0xff, TDA10023_OUTPUT_MODE_PARALLEL_B, /*
-				INTP1 POCLKP=1 FEL=1 MFS=0 */
-/* 096 */ 0x2b, 0x01, 0xa1,  /* INTS1 */
-/* 099 */ 0x20, 0xff, 0x04,  /* INTP2 SWAPP=? MSBFIRSTP=? INTPSEL=? */
-/* 102 */ 0x2c, 0xff, 0x0d,  /* INTP/S TRIP=0 TRIS=0 */
-/* 105 */ 0xc4, 0xff, 0x00,
-/* 108 */ 0xc3, 0x30, 0x00,
-/* 111 */ 0xb5, 0xff, 0x19,  /* ERAGC_THD */
-/* 114 */ 0x00, 0x03, 0x01,  /* GPR, CLBS soft reset */
-/* 117 */ 0x00, 0x03, 0x03,  /* GPR, CLBS soft reset */
-/* 120 */ 0xff, 0x64, 0x00,  /* Sleep 100ms */
-/* 123 */ 0xff, 0xff, 0xff
-};
-	dprintk("DVB: TDA10023(%d): init chip\n", fe->dvb->num);
-
-	/* override default values if set in config */
-	if (state->config->deltaf) {
-		tda10023_inittab[80] = (state->config->deltaf & 0xff);
-		tda10023_inittab[83] = (state->config->deltaf >> 8);
-	}
-
-	if (state->config->output_mode)
-		tda10023_inittab[95] = state->config->output_mode;
-
-	tda10023_writetab(state, tda10023_inittab);
-
-	return 0;
-}
-
-struct qam_params {
-	u8 qam, lockthr, mseth, aref, agcrefnyq, eragnyq_thd;
-};
-
-static int tda10023_set_parameters(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	u32 delsys  = c->delivery_system;
-	unsigned qam = c->modulation;
-	bool is_annex_c;
-	struct tda10023_state* state = fe->demodulator_priv;
-	static const struct qam_params qam_params[] = {
-		/* Modulation  QAM    LOCKTHR   MSETH   AREF AGCREFNYQ ERAGCNYQ_THD */
-		[QPSK]    = { (5<<2),  0x78,    0x8c,   0x96,   0x78,   0x4c  },
-		[QAM_16]  = { (0<<2),  0x87,    0xa2,   0x91,   0x8c,   0x57  },
-		[QAM_32]  = { (1<<2),  0x64,    0x74,   0x96,   0x8c,   0x57  },
-		[QAM_64]  = { (2<<2),  0x46,    0x43,   0x6a,   0x6a,   0x44  },
-		[QAM_128] = { (3<<2),  0x36,    0x34,   0x7e,   0x78,   0x4c  },
-		[QAM_256] = { (4<<2),  0x26,    0x23,   0x6c,   0x5c,   0x3c  },
-	};
-
-	switch (delsys) {
-	case SYS_DVBC_ANNEX_A:
-		is_annex_c = false;
-		break;
-	case SYS_DVBC_ANNEX_C:
-		is_annex_c = true;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/*
-	 * gcc optimizes the code bellow the same way as it would code:
-	 *		 "if (qam > 5) return -EINVAL;"
-	 * Yet, the code is clearer, as it shows what QAM standards are
-	 * supported by the driver, and avoids the usage of magic numbers on
-	 * it.
-	 */
-	switch (qam) {
-	case QPSK:
-	case QAM_16:
-	case QAM_32:
-	case QAM_64:
-	case QAM_128:
-	case QAM_256:
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	tda10023_set_symbolrate(state, c->symbol_rate);
-	tda10023_writereg(state, 0x05, qam_params[qam].lockthr);
-	tda10023_writereg(state, 0x08, qam_params[qam].mseth);
-	tda10023_writereg(state, 0x09, qam_params[qam].aref);
-	tda10023_writereg(state, 0xb4, qam_params[qam].agcrefnyq);
-	tda10023_writereg(state, 0xb6, qam_params[qam].eragnyq_thd);
-#if 0
-	tda10023_writereg(state, 0x04, (c->inversion ? 0x12 : 0x32));
-	tda10023_writebit(state, 0x04, 0x60, (c->inversion ? 0 : 0x20));
-#endif
-	tda10023_writebit(state, 0x04, 0x40, 0x40);
-
-	if (is_annex_c)
-		tda10023_writebit(state, 0x3d, 0xfc, 0x03);
-	else
-		tda10023_writebit(state, 0x3d, 0xfc, 0x02);
-
-	tda10023_setup_reg0(state, qam_params[qam].qam);
-
-	return 0;
-}
-
-static int tda10023_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct tda10023_state* state = fe->demodulator_priv;
-	int sync;
-
-	*status = 0;
-
-	//0x11[1] == CARLOCK -> Carrier locked
-	//0x11[2] == FSYNC -> Frame synchronisation
-	//0x11[3] == FEL -> Front End locked
-	//0x11[6] == NODVB -> DVB Mode Information
-	sync = tda10023_readreg (state, 0x11);
-
-	if (sync & 2)
-		*status |= FE_HAS_SIGNAL|FE_HAS_CARRIER;
-
-	if (sync & 4)
-		*status |= FE_HAS_SYNC|FE_HAS_VITERBI;
-
-	if (sync & 8)
-		*status |= FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int tda10023_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct tda10023_state* state = fe->demodulator_priv;
-	u8 a,b,c;
-	a=tda10023_readreg(state, 0x14);
-	b=tda10023_readreg(state, 0x15);
-	c=tda10023_readreg(state, 0x16)&0xf;
-	tda10023_writebit (state, 0x10, 0xc0, 0x00);
-
-	*ber = a | (b<<8)| (c<<16);
-	return 0;
-}
-
-static int tda10023_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	struct tda10023_state* state = fe->demodulator_priv;
-	u8 ifgain=tda10023_readreg(state, 0x2f);
-
-	u16 gain = ((255-tda10023_readreg(state, 0x17))) + (255-ifgain)/16;
-	// Max raw value is about 0xb0 -> Normalize to >0xf0 after 0x90
-	if (gain>0x90)
-		gain=gain+2*(gain-0x90);
-	if (gain>255)
-		gain=255;
-
-	*strength = (gain<<8)|gain;
-	return 0;
-}
-
-static int tda10023_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct tda10023_state* state = fe->demodulator_priv;
-
-	u8 quality = ~tda10023_readreg(state, 0x18);
-	*snr = (quality << 8) | quality;
-	return 0;
-}
-
-static int tda10023_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct tda10023_state* state = fe->demodulator_priv;
-	u8 a,b,c,d;
-	a= tda10023_readreg (state, 0x74);
-	b= tda10023_readreg (state, 0x75);
-	c= tda10023_readreg (state, 0x76);
-	d= tda10023_readreg (state, 0x77);
-	*ucblocks = a | (b<<8)|(c<<16)|(d<<24);
-
-	tda10023_writebit (state, 0x10, 0x20,0x00);
-	tda10023_writebit (state, 0x10, 0x20,0x20);
-	tda10023_writebit (state, 0x13, 0x01, 0x00);
-
-	return 0;
-}
-
-static int tda10023_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct tda10023_state* state = fe->demodulator_priv;
-	int sync,inv;
-	s8 afc = 0;
-
-	sync = tda10023_readreg(state, 0x11);
-	afc = tda10023_readreg(state, 0x19);
-	inv = tda10023_readreg(state, 0x04);
-
-	if (verbose) {
-		/* AFC only valid when carrier has been recovered */
-		printk(sync & 2 ? "DVB: TDA10023(%d): AFC (%d) %dHz\n" :
-				  "DVB: TDA10023(%d): [AFC (%d) %dHz]\n",
-			state->frontend.dvb->num, afc,
-		       -((s32)p->symbol_rate * afc) >> 10);
-	}
-
-	p->inversion = (inv&0x20?0:1);
-	p->modulation = ((state->reg0 >> 2) & 7) + QAM_16;
-
-	p->fec_inner = FEC_NONE;
-	p->frequency = ((p->frequency + 31250) / 62500) * 62500;
-
-	if (sync & 2)
-		p->frequency -= ((s32)p->symbol_rate * afc) >> 10;
-
-	return 0;
-}
-
-static int tda10023_sleep(struct dvb_frontend* fe)
-{
-	struct tda10023_state* state = fe->demodulator_priv;
-
-	tda10023_writereg (state, 0x1b, 0x02);  /* pdown ADC */
-	tda10023_writereg (state, 0x00, 0x80);  /* standby */
-
-	return 0;
-}
-
-static int tda10023_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
-{
-	struct tda10023_state* state = fe->demodulator_priv;
-
-	if (enable) {
-		lock_tuner(state);
-	} else {
-		unlock_tuner(state);
-	}
-	return 0;
-}
-
-static void tda10023_release(struct dvb_frontend* fe)
-{
-	struct tda10023_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops tda10023_ops;
-
-struct dvb_frontend *tda10023_attach(const struct tda10023_config *config,
-				     struct i2c_adapter *i2c,
-				     u8 pwm)
-{
-	struct tda10023_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct tda10023_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-
-	/* wakeup if in standby */
-	tda10023_writereg (state, 0x00, 0x33);
-	/* check if the demod is there */
-	if ((tda10023_readreg(state, 0x1a) & 0xf0) != 0x70) goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &tda10023_ops, sizeof(struct dvb_frontend_ops));
-	state->pwm = pwm;
-	state->reg0 = REG0_INIT_VAL;
-	if (state->config->xtal) {
-		state->xtal  = state->config->xtal;
-		state->pll_m = state->config->pll_m;
-		state->pll_p = state->config->pll_p;
-		state->pll_n = state->config->pll_n;
-	} else {
-		/* set default values if not defined in config */
-		state->xtal  = 28920000;
-		state->pll_m = 8;
-		state->pll_p = 4;
-		state->pll_n = 1;
-	}
-
-	/* calc sysclk */
-	state->sysclk = (state->xtal * state->pll_m / \
-			(state->pll_n * state->pll_p));
-
-	state->frontend.ops.info.symbol_rate_min = (state->sysclk/2)/64;
-	state->frontend.ops.info.symbol_rate_max = (state->sysclk/2)/4;
-
-	dprintk("DVB: TDA10023 %s: xtal:%d pll_m:%d pll_p:%d pll_n:%d\n",
-		__func__, state->xtal, state->pll_m, state->pll_p,
-		state->pll_n);
-
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops tda10023_ops = {
-	.delsys = { SYS_DVBC_ANNEX_A, SYS_DVBC_ANNEX_C },
-	.info = {
-		.name = "Philips TDA10023 DVB-C",
-		.frequency_stepsize = 62500,
-		.frequency_min =  47000000,
-		.frequency_max = 862000000,
-		.symbol_rate_min = 0,  /* set in tda10023_attach */
-		.symbol_rate_max = 0,  /* set in tda10023_attach */
-		.caps = 0x400 | //FE_CAN_QAM_4
-			FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 |
-			FE_CAN_QAM_128 | FE_CAN_QAM_256 |
-			FE_CAN_FEC_AUTO
-	},
-
-	.release = tda10023_release,
-
-	.init = tda10023_init,
-	.sleep = tda10023_sleep,
-	.i2c_gate_ctrl = tda10023_i2c_gate_ctrl,
-
-	.set_frontend = tda10023_set_parameters,
-	.get_frontend = tda10023_get_frontend,
-	.read_status = tda10023_read_status,
-	.read_ber = tda10023_read_ber,
-	.read_signal_strength = tda10023_read_signal_strength,
-	.read_snr = tda10023_read_snr,
-	.read_ucblocks = tda10023_read_ucblocks,
-};
-
-
-MODULE_DESCRIPTION("Philips TDA10023 DVB-C demodulator driver");
-MODULE_AUTHOR("Georg Acher, Hartmut Birr");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(tda10023_attach);
diff --git a/drivers/media/dvb/frontends/tda1002x.h b/drivers/media/dvb/frontends/tda1002x.h
deleted file mode 100644
index 04d1941..0000000
--- a/drivers/media/dvb/frontends/tda1002x.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-    TDA10021/TDA10023  - Single Chip Cable Channel Receiver driver module
-			 used on the the Siemens DVB-C cards
-
-    Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
-    Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
-		   Support for TDA10021
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef TDA1002x_H
-#define TDA1002x_H
-
-#include <linux/dvb/frontend.h>
-
-struct tda1002x_config {
-	/* the demodulator's i2c address */
-	u8 demod_address;
-	u8 invert;
-};
-
-enum tda10023_output_mode {
-	TDA10023_OUTPUT_MODE_PARALLEL_A = 0xe0,
-	TDA10023_OUTPUT_MODE_PARALLEL_B = 0xa1,
-	TDA10023_OUTPUT_MODE_PARALLEL_C = 0xa0,
-	TDA10023_OUTPUT_MODE_SERIAL, /* TODO: not implemented */
-};
-
-struct tda10023_config {
-	/* the demodulator's i2c address */
-	u8 demod_address;
-	u8 invert;
-
-	/* clock settings */
-	u32 xtal; /* defaults: 28920000 */
-	u8 pll_m; /* defaults: 8 */
-	u8 pll_p; /* defaults: 4 */
-	u8 pll_n; /* defaults: 1 */
-
-	/* MPEG2 TS output mode */
-	u8 output_mode;
-
-	/* input freq offset + baseband conversion type */
-	u16 deltaf;
-};
-
-#if defined(CONFIG_DVB_TDA10021) || (defined(CONFIG_DVB_TDA10021_MODULE) && defined(MODULE))
-extern struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config,
-					    struct i2c_adapter* i2c, u8 pwm);
-#else
-static inline struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config,
-					    struct i2c_adapter* i2c, u8 pwm)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_TDA10021
-
-#if defined(CONFIG_DVB_TDA10023) || \
-	(defined(CONFIG_DVB_TDA10023_MODULE) && defined(MODULE))
-extern struct dvb_frontend *tda10023_attach(
-	const struct tda10023_config *config,
-	struct i2c_adapter *i2c, u8 pwm);
-#else
-static inline struct dvb_frontend *tda10023_attach(
-	const struct tda10023_config *config,
-	struct i2c_adapter *i2c, u8 pwm)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_TDA10023
-
-#endif // TDA1002x_H
diff --git a/drivers/media/dvb/frontends/tda10048.c b/drivers/media/dvb/frontends/tda10048.c
deleted file mode 100644
index 71fb632..0000000
--- a/drivers/media/dvb/frontends/tda10048.c
+++ /dev/null
@@ -1,1191 +0,0 @@
-/*
-    NXP TDA10048HN DVB OFDM demodulator driver
-
-    Copyright (C) 2009 Steven Toth <stoth@kernellabs.com>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/math64.h>
-#include <asm/div64.h>
-#include "dvb_frontend.h"
-#include "dvb_math.h"
-#include "tda10048.h"
-
-#define TDA10048_DEFAULT_FIRMWARE "dvb-fe-tda10048-1.0.fw"
-#define TDA10048_DEFAULT_FIRMWARE_SIZE 24878
-
-/* Register name definitions */
-#define TDA10048_IDENTITY          0x00
-#define TDA10048_VERSION           0x01
-#define TDA10048_DSP_CODE_CPT      0x0C
-#define TDA10048_DSP_CODE_IN       0x0E
-#define TDA10048_IN_CONF1          0x10
-#define TDA10048_IN_CONF2          0x11
-#define TDA10048_IN_CONF3          0x12
-#define TDA10048_OUT_CONF1         0x14
-#define TDA10048_OUT_CONF2         0x15
-#define TDA10048_OUT_CONF3         0x16
-#define TDA10048_AUTO              0x18
-#define TDA10048_SYNC_STATUS       0x1A
-#define TDA10048_CONF_C4_1         0x1E
-#define TDA10048_CONF_C4_2         0x1F
-#define TDA10048_CODE_IN_RAM       0x20
-#define TDA10048_CHANNEL_INFO1_R   0x22
-#define TDA10048_CHANNEL_INFO2_R   0x23
-#define TDA10048_CHANNEL_INFO1     0x24
-#define TDA10048_CHANNEL_INFO2     0x25
-#define TDA10048_TIME_ERROR_R      0x26
-#define TDA10048_TIME_ERROR        0x27
-#define TDA10048_FREQ_ERROR_LSB_R  0x28
-#define TDA10048_FREQ_ERROR_MSB_R  0x29
-#define TDA10048_FREQ_ERROR_LSB    0x2A
-#define TDA10048_FREQ_ERROR_MSB    0x2B
-#define TDA10048_IT_SEL            0x30
-#define TDA10048_IT_STAT           0x32
-#define TDA10048_DSP_AD_LSB        0x3C
-#define TDA10048_DSP_AD_MSB        0x3D
-#define TDA10048_DSP_REG_LSB       0x3E
-#define TDA10048_DSP_REG_MSB       0x3F
-#define TDA10048_CONF_TRISTATE1    0x44
-#define TDA10048_CONF_TRISTATE2    0x45
-#define TDA10048_CONF_POLARITY     0x46
-#define TDA10048_GPIO_SP_DS0       0x48
-#define TDA10048_GPIO_SP_DS1       0x49
-#define TDA10048_GPIO_SP_DS2       0x4A
-#define TDA10048_GPIO_SP_DS3       0x4B
-#define TDA10048_GPIO_OUT_SEL      0x4C
-#define TDA10048_GPIO_SELECT       0x4D
-#define TDA10048_IC_MODE           0x4E
-#define TDA10048_CONF_XO           0x50
-#define TDA10048_CONF_PLL1         0x51
-#define TDA10048_CONF_PLL2         0x52
-#define TDA10048_CONF_PLL3         0x53
-#define TDA10048_CONF_ADC          0x54
-#define TDA10048_CONF_ADC_2        0x55
-#define TDA10048_CONF_C1_1         0x60
-#define TDA10048_CONF_C1_3         0x62
-#define TDA10048_AGC_CONF          0x70
-#define TDA10048_AGC_THRESHOLD_LSB 0x72
-#define TDA10048_AGC_THRESHOLD_MSB 0x73
-#define TDA10048_AGC_RENORM        0x74
-#define TDA10048_AGC_GAINS         0x76
-#define TDA10048_AGC_TUN_MIN       0x78
-#define TDA10048_AGC_TUN_MAX       0x79
-#define TDA10048_AGC_IF_MIN        0x7A
-#define TDA10048_AGC_IF_MAX        0x7B
-#define TDA10048_AGC_TUN_LEVEL     0x7E
-#define TDA10048_AGC_IF_LEVEL      0x7F
-#define TDA10048_DIG_AGC_LEVEL     0x81
-#define TDA10048_FREQ_PHY2_LSB     0x86
-#define TDA10048_FREQ_PHY2_MSB     0x87
-#define TDA10048_TIME_INVWREF_LSB  0x88
-#define TDA10048_TIME_INVWREF_MSB  0x89
-#define TDA10048_TIME_WREF_LSB     0x8A
-#define TDA10048_TIME_WREF_MID1    0x8B
-#define TDA10048_TIME_WREF_MID2    0x8C
-#define TDA10048_TIME_WREF_MSB     0x8D
-#define TDA10048_NP_OUT            0xA2
-#define TDA10048_CELL_ID_LSB       0xA4
-#define TDA10048_CELL_ID_MSB       0xA5
-#define TDA10048_EXTTPS_ODD        0xAA
-#define TDA10048_EXTTPS_EVEN       0xAB
-#define TDA10048_TPS_LENGTH        0xAC
-#define TDA10048_FREE_REG_1        0xB2
-#define TDA10048_FREE_REG_2        0xB3
-#define TDA10048_CONF_C3_1         0xC0
-#define TDA10048_CVBER_CTRL        0xC2
-#define TDA10048_CBER_NMAX_LSB     0xC4
-#define TDA10048_CBER_NMAX_MSB     0xC5
-#define TDA10048_CBER_LSB          0xC6
-#define TDA10048_CBER_MSB          0xC7
-#define TDA10048_VBER_LSB          0xC8
-#define TDA10048_VBER_MID          0xC9
-#define TDA10048_VBER_MSB          0xCA
-#define TDA10048_CVBER_LUT         0xCC
-#define TDA10048_UNCOR_CTRL        0xCD
-#define TDA10048_UNCOR_CPT_LSB     0xCE
-#define TDA10048_UNCOR_CPT_MSB     0xCF
-#define TDA10048_SOFT_IT_C3        0xD6
-#define TDA10048_CONF_TS2          0xE0
-#define TDA10048_CONF_TS1          0xE1
-
-static unsigned int debug;
-
-#define dprintk(level, fmt, arg...)\
-	do { if (debug >= level)\
-		printk(KERN_DEBUG "tda10048: " fmt, ## arg);\
-	} while (0)
-
-struct tda10048_state {
-
-	struct i2c_adapter *i2c;
-
-	/* We'll cache and update the attach config settings */
-	struct tda10048_config config;
-	struct dvb_frontend frontend;
-
-	int fwloaded;
-
-	u32 freq_if_hz;
-	u32 xtal_hz;
-	u32 pll_mfactor;
-	u32 pll_nfactor;
-	u32 pll_pfactor;
-	u32 sample_freq;
-
-	u32 bandwidth;
-};
-
-static struct init_tab {
-	u8	reg;
-	u16	data;
-} init_tab[] = {
-	{ TDA10048_CONF_PLL1, 0x08 },
-	{ TDA10048_CONF_ADC_2, 0x00 },
-	{ TDA10048_CONF_C4_1, 0x00 },
-	{ TDA10048_CONF_PLL1, 0x0f },
-	{ TDA10048_CONF_PLL2, 0x0a },
-	{ TDA10048_CONF_PLL3, 0x43 },
-	{ TDA10048_FREQ_PHY2_LSB, 0x02 },
-	{ TDA10048_FREQ_PHY2_MSB, 0x0a },
-	{ TDA10048_TIME_WREF_LSB, 0xbd },
-	{ TDA10048_TIME_WREF_MID1, 0xe4 },
-	{ TDA10048_TIME_WREF_MID2, 0xa8 },
-	{ TDA10048_TIME_WREF_MSB, 0x02 },
-	{ TDA10048_TIME_INVWREF_LSB, 0x04 },
-	{ TDA10048_TIME_INVWREF_MSB, 0x06 },
-	{ TDA10048_CONF_C4_1, 0x00 },
-	{ TDA10048_CONF_C1_1, 0xa8 },
-	{ TDA10048_AGC_CONF, 0x16 },
-	{ TDA10048_CONF_C1_3, 0x0b },
-	{ TDA10048_AGC_TUN_MIN, 0x00 },
-	{ TDA10048_AGC_TUN_MAX, 0xff },
-	{ TDA10048_AGC_IF_MIN, 0x00 },
-	{ TDA10048_AGC_IF_MAX, 0xff },
-	{ TDA10048_AGC_THRESHOLD_MSB, 0x00 },
-	{ TDA10048_AGC_THRESHOLD_LSB, 0x70 },
-	{ TDA10048_CVBER_CTRL, 0x38 },
-	{ TDA10048_AGC_GAINS, 0x12 },
-	{ TDA10048_CONF_XO, 0x00 },
-	{ TDA10048_CONF_TS1, 0x07 },
-	{ TDA10048_IC_MODE, 0x00 },
-	{ TDA10048_CONF_TS2, 0xc0 },
-	{ TDA10048_CONF_TRISTATE1, 0x21 },
-	{ TDA10048_CONF_TRISTATE2, 0x00 },
-	{ TDA10048_CONF_POLARITY, 0x00 },
-	{ TDA10048_CONF_C4_2, 0x04 },
-	{ TDA10048_CONF_ADC, 0x60 },
-	{ TDA10048_CONF_ADC_2, 0x10 },
-	{ TDA10048_CONF_ADC, 0x60 },
-	{ TDA10048_CONF_ADC_2, 0x00 },
-	{ TDA10048_CONF_C1_1, 0xa8 },
-	{ TDA10048_UNCOR_CTRL, 0x00 },
-	{ TDA10048_CONF_C4_2, 0x04 },
-};
-
-static struct pll_tab {
-	u32	clk_freq_khz;
-	u32	if_freq_khz;
-} pll_tab[] = {
-	{ TDA10048_CLK_4000,  TDA10048_IF_36130 },
-	{ TDA10048_CLK_16000, TDA10048_IF_3300 },
-	{ TDA10048_CLK_16000, TDA10048_IF_3500 },
-	{ TDA10048_CLK_16000, TDA10048_IF_3800 },
-	{ TDA10048_CLK_16000, TDA10048_IF_4000 },
-	{ TDA10048_CLK_16000, TDA10048_IF_4300 },
-	{ TDA10048_CLK_16000, TDA10048_IF_4500 },
-	{ TDA10048_CLK_16000, TDA10048_IF_5000 },
-	{ TDA10048_CLK_16000, TDA10048_IF_36130 },
-};
-
-static int tda10048_writereg(struct tda10048_state *state, u8 reg, u8 data)
-{
-	struct tda10048_config *config = &state->config;
-	int ret;
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg = {
-		.addr = config->demod_address,
-		.flags = 0, .buf = buf, .len = 2 };
-
-	dprintk(2, "%s(reg = 0x%02x, data = 0x%02x)\n", __func__, reg, data);
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-
-	if (ret != 1)
-		printk("%s: writereg error (ret == %i)\n", __func__, ret);
-
-	return (ret != 1) ? -1 : 0;
-}
-
-static u8 tda10048_readreg(struct tda10048_state *state, u8 reg)
-{
-	struct tda10048_config *config = &state->config;
-	int ret;
-	u8 b0[] = { reg };
-	u8 b1[] = { 0 };
-	struct i2c_msg msg[] = {
-		{ .addr = config->demod_address,
-			.flags = 0, .buf = b0, .len = 1 },
-		{ .addr = config->demod_address,
-			.flags = I2C_M_RD, .buf = b1, .len = 1 } };
-
-	dprintk(2, "%s(reg = 0x%02x)\n", __func__, reg);
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2)
-		printk(KERN_ERR "%s: readreg error (ret == %i)\n",
-			__func__, ret);
-
-	return b1[0];
-}
-
-static int tda10048_writeregbulk(struct tda10048_state *state, u8 reg,
-				 const u8 *data, u16 len)
-{
-	struct tda10048_config *config = &state->config;
-	int ret = -EREMOTEIO;
-	struct i2c_msg msg;
-	u8 *buf;
-
-	dprintk(2, "%s(%d, ?, len = %d)\n", __func__, reg, len);
-
-	buf = kmalloc(len + 1, GFP_KERNEL);
-	if (buf == NULL) {
-		ret = -ENOMEM;
-		goto error;
-	}
-
-	*buf = reg;
-	memcpy(buf + 1, data, len);
-
-	msg.addr = config->demod_address;
-	msg.flags = 0;
-	msg.buf = buf;
-	msg.len = len + 1;
-
-	dprintk(2, "%s():  write len = %d\n",
-		__func__, msg.len);
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-	if (ret != 1) {
-		printk(KERN_ERR "%s(): writereg error err %i\n",
-			 __func__, ret);
-		ret = -EREMOTEIO;
-	}
-
-error:
-	kfree(buf);
-
-	return ret;
-}
-
-static int tda10048_set_phy2(struct dvb_frontend *fe, u32 sample_freq_hz,
-			     u32 if_hz)
-{
-	struct tda10048_state *state = fe->demodulator_priv;
-	u64 t;
-
-	dprintk(1, "%s()\n", __func__);
-
-	if (sample_freq_hz == 0)
-		return -EINVAL;
-
-	if (if_hz < (sample_freq_hz / 2)) {
-		/* PHY2 = (if2/fs) * 2^15 */
-		t = if_hz;
-		t *= 10;
-		t *= 32768;
-		do_div(t, sample_freq_hz);
-		t += 5;
-		do_div(t, 10);
-	} else {
-		/* PHY2 = ((IF1-fs)/fs) * 2^15 */
-		t = sample_freq_hz - if_hz;
-		t *= 10;
-		t *= 32768;
-		do_div(t, sample_freq_hz);
-		t += 5;
-		do_div(t, 10);
-		t = ~t + 1;
-	}
-
-	tda10048_writereg(state, TDA10048_FREQ_PHY2_LSB, (u8)t);
-	tda10048_writereg(state, TDA10048_FREQ_PHY2_MSB, (u8)(t >> 8));
-
-	return 0;
-}
-
-static int tda10048_set_wref(struct dvb_frontend *fe, u32 sample_freq_hz,
-			     u32 bw)
-{
-	struct tda10048_state *state = fe->demodulator_priv;
-	u64 t, z;
-
-	dprintk(1, "%s()\n", __func__);
-
-	if (sample_freq_hz == 0)
-		return -EINVAL;
-
-	/* WREF = (B / (7 * fs)) * 2^31 */
-	t = bw * 10;
-	/* avoid warning: this decimal constant is unsigned only in ISO C90 */
-	/* t *= 2147483648 on 32bit platforms */
-	t *= (2048 * 1024);
-	t *= 1024;
-	z = 7 * sample_freq_hz;
-	do_div(t, z);
-	t += 5;
-	do_div(t, 10);
-
-	tda10048_writereg(state, TDA10048_TIME_WREF_LSB, (u8)t);
-	tda10048_writereg(state, TDA10048_TIME_WREF_MID1, (u8)(t >> 8));
-	tda10048_writereg(state, TDA10048_TIME_WREF_MID2, (u8)(t >> 16));
-	tda10048_writereg(state, TDA10048_TIME_WREF_MSB, (u8)(t >> 24));
-
-	return 0;
-}
-
-static int tda10048_set_invwref(struct dvb_frontend *fe, u32 sample_freq_hz,
-				u32 bw)
-{
-	struct tda10048_state *state = fe->demodulator_priv;
-	u64 t;
-
-	dprintk(1, "%s()\n", __func__);
-
-	if (sample_freq_hz == 0)
-		return -EINVAL;
-
-	/* INVWREF = ((7 * fs) / B) * 2^5 */
-	t = sample_freq_hz;
-	t *= 7;
-	t *= 32;
-	t *= 10;
-	do_div(t, bw);
-	t += 5;
-	do_div(t, 10);
-
-	tda10048_writereg(state, TDA10048_TIME_INVWREF_LSB, (u8)t);
-	tda10048_writereg(state, TDA10048_TIME_INVWREF_MSB, (u8)(t >> 8));
-
-	return 0;
-}
-
-static int tda10048_set_bandwidth(struct dvb_frontend *fe,
-	u32 bw)
-{
-	struct tda10048_state *state = fe->demodulator_priv;
-	dprintk(1, "%s(bw=%d)\n", __func__, bw);
-
-	/* Bandwidth setting may need to be adjusted */
-	switch (bw) {
-	case 6000000:
-	case 7000000:
-	case 8000000:
-		tda10048_set_wref(fe, state->sample_freq, bw);
-		tda10048_set_invwref(fe, state->sample_freq, bw);
-		break;
-	default:
-		printk(KERN_ERR "%s() invalid bandwidth\n", __func__);
-		return -EINVAL;
-	}
-
-	state->bandwidth = bw;
-
-	return 0;
-}
-
-static int tda10048_set_if(struct dvb_frontend *fe, u32 bw)
-{
-	struct tda10048_state *state = fe->demodulator_priv;
-	struct tda10048_config *config = &state->config;
-	int i;
-	u32 if_freq_khz;
-
-	dprintk(1, "%s(bw = %d)\n", __func__, bw);
-
-	/* based on target bandwidth and clk we calculate pll factors */
-	switch (bw) {
-	case 6000000:
-		if_freq_khz = config->dtv6_if_freq_khz;
-		break;
-	case 7000000:
-		if_freq_khz = config->dtv7_if_freq_khz;
-		break;
-	case 8000000:
-		if_freq_khz = config->dtv8_if_freq_khz;
-		break;
-	default:
-		printk(KERN_ERR "%s() no default\n", __func__);
-		return -EINVAL;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(pll_tab); i++) {
-		if ((pll_tab[i].clk_freq_khz == config->clk_freq_khz) &&
-			(pll_tab[i].if_freq_khz == if_freq_khz)) {
-
-			state->freq_if_hz = pll_tab[i].if_freq_khz * 1000;
-			state->xtal_hz = pll_tab[i].clk_freq_khz * 1000;
-			break;
-		}
-	}
-	if (i == ARRAY_SIZE(pll_tab)) {
-		printk(KERN_ERR "%s() Incorrect attach settings\n",
-			__func__);
-		return -EINVAL;
-	}
-
-	dprintk(1, "- freq_if_hz = %d\n", state->freq_if_hz);
-	dprintk(1, "- xtal_hz = %d\n", state->xtal_hz);
-	dprintk(1, "- pll_mfactor = %d\n", state->pll_mfactor);
-	dprintk(1, "- pll_nfactor = %d\n", state->pll_nfactor);
-	dprintk(1, "- pll_pfactor = %d\n", state->pll_pfactor);
-
-	/* Calculate the sample frequency */
-	state->sample_freq = state->xtal_hz * (state->pll_mfactor + 45);
-	state->sample_freq /= (state->pll_nfactor + 1);
-	state->sample_freq /= (state->pll_pfactor + 4);
-	dprintk(1, "- sample_freq = %d\n", state->sample_freq);
-
-	/* Update the I/F */
-	tda10048_set_phy2(fe, state->sample_freq, state->freq_if_hz);
-
-	return 0;
-}
-
-static int tda10048_firmware_upload(struct dvb_frontend *fe)
-{
-	struct tda10048_state *state = fe->demodulator_priv;
-	struct tda10048_config *config = &state->config;
-	const struct firmware *fw;
-	int ret;
-	int pos = 0;
-	int cnt;
-	u8 wlen = config->fwbulkwritelen;
-
-	if ((wlen != TDA10048_BULKWRITE_200) && (wlen != TDA10048_BULKWRITE_50))
-		wlen = TDA10048_BULKWRITE_200;
-
-	/* request the firmware, this will block and timeout */
-	printk(KERN_INFO "%s: waiting for firmware upload (%s)...\n",
-		__func__,
-		TDA10048_DEFAULT_FIRMWARE);
-
-	ret = request_firmware(&fw, TDA10048_DEFAULT_FIRMWARE,
-		state->i2c->dev.parent);
-	if (ret) {
-		printk(KERN_ERR "%s: Upload failed. (file not found?)\n",
-			__func__);
-		return -EIO;
-	} else {
-		printk(KERN_INFO "%s: firmware read %Zu bytes.\n",
-			__func__,
-			fw->size);
-		ret = 0;
-	}
-
-	if (fw->size != TDA10048_DEFAULT_FIRMWARE_SIZE) {
-		printk(KERN_ERR "%s: firmware incorrect size\n", __func__);
-		ret = -EIO;
-	} else {
-		printk(KERN_INFO "%s: firmware uploading\n", __func__);
-
-		/* Soft reset */
-		tda10048_writereg(state, TDA10048_CONF_TRISTATE1,
-			tda10048_readreg(state, TDA10048_CONF_TRISTATE1)
-				& 0xfe);
-		tda10048_writereg(state, TDA10048_CONF_TRISTATE1,
-			tda10048_readreg(state, TDA10048_CONF_TRISTATE1)
-				| 0x01);
-
-		/* Put the demod into host download mode */
-		tda10048_writereg(state, TDA10048_CONF_C4_1,
-			tda10048_readreg(state, TDA10048_CONF_C4_1) & 0xf9);
-
-		/* Boot the DSP */
-		tda10048_writereg(state, TDA10048_CONF_C4_1,
-			tda10048_readreg(state, TDA10048_CONF_C4_1) | 0x08);
-
-		/* Prepare for download */
-		tda10048_writereg(state, TDA10048_DSP_CODE_CPT, 0);
-
-		/* Download the firmware payload */
-		while (pos < fw->size) {
-
-			if ((fw->size - pos) > wlen)
-				cnt = wlen;
-			else
-				cnt = fw->size - pos;
-
-			tda10048_writeregbulk(state, TDA10048_DSP_CODE_IN,
-				&fw->data[pos], cnt);
-
-			pos += cnt;
-		}
-
-		ret = -EIO;
-		/* Wait up to 250ms for the DSP to boot */
-		for (cnt = 0; cnt < 250 ; cnt += 10) {
-
-			msleep(10);
-
-			if (tda10048_readreg(state, TDA10048_SYNC_STATUS)
-				& 0x40) {
-				ret = 0;
-				break;
-			}
-		}
-	}
-
-	release_firmware(fw);
-
-	if (ret == 0) {
-		printk(KERN_INFO "%s: firmware uploaded\n", __func__);
-		state->fwloaded = 1;
-	} else
-		printk(KERN_ERR "%s: firmware upload failed\n", __func__);
-
-	return ret;
-}
-
-static int tda10048_set_inversion(struct dvb_frontend *fe, int inversion)
-{
-	struct tda10048_state *state = fe->demodulator_priv;
-
-	dprintk(1, "%s(%d)\n", __func__, inversion);
-
-	if (inversion == TDA10048_INVERSION_ON)
-		tda10048_writereg(state, TDA10048_CONF_C1_1,
-			tda10048_readreg(state, TDA10048_CONF_C1_1) | 0x20);
-	else
-		tda10048_writereg(state, TDA10048_CONF_C1_1,
-			tda10048_readreg(state, TDA10048_CONF_C1_1) & 0xdf);
-
-	return 0;
-}
-
-/* Retrieve the demod settings */
-static int tda10048_get_tps(struct tda10048_state *state,
-	struct dtv_frontend_properties *p)
-{
-	u8 val;
-
-	/* Make sure the TPS regs are valid */
-	if (!(tda10048_readreg(state, TDA10048_AUTO) & 0x01))
-		return -EAGAIN;
-
-	val = tda10048_readreg(state, TDA10048_OUT_CONF2);
-	switch ((val & 0x60) >> 5) {
-	case 0:
-		p->modulation = QPSK;
-		break;
-	case 1:
-		p->modulation = QAM_16;
-		break;
-	case 2:
-		p->modulation = QAM_64;
-		break;
-	}
-	switch ((val & 0x18) >> 3) {
-	case 0:
-		p->hierarchy = HIERARCHY_NONE;
-		break;
-	case 1:
-		p->hierarchy = HIERARCHY_1;
-		break;
-	case 2:
-		p->hierarchy = HIERARCHY_2;
-		break;
-	case 3:
-		p->hierarchy = HIERARCHY_4;
-		break;
-	}
-	switch (val & 0x07) {
-	case 0:
-		p->code_rate_HP = FEC_1_2;
-		break;
-	case 1:
-		p->code_rate_HP = FEC_2_3;
-		break;
-	case 2:
-		p->code_rate_HP = FEC_3_4;
-		break;
-	case 3:
-		p->code_rate_HP = FEC_5_6;
-		break;
-	case 4:
-		p->code_rate_HP = FEC_7_8;
-		break;
-	}
-
-	val = tda10048_readreg(state, TDA10048_OUT_CONF3);
-	switch (val & 0x07) {
-	case 0:
-		p->code_rate_LP = FEC_1_2;
-		break;
-	case 1:
-		p->code_rate_LP = FEC_2_3;
-		break;
-	case 2:
-		p->code_rate_LP = FEC_3_4;
-		break;
-	case 3:
-		p->code_rate_LP = FEC_5_6;
-		break;
-	case 4:
-		p->code_rate_LP = FEC_7_8;
-		break;
-	}
-
-	val = tda10048_readreg(state, TDA10048_OUT_CONF1);
-	switch ((val & 0x0c) >> 2) {
-	case 0:
-		p->guard_interval = GUARD_INTERVAL_1_32;
-		break;
-	case 1:
-		p->guard_interval = GUARD_INTERVAL_1_16;
-		break;
-	case 2:
-		p->guard_interval =  GUARD_INTERVAL_1_8;
-		break;
-	case 3:
-		p->guard_interval =  GUARD_INTERVAL_1_4;
-		break;
-	}
-	switch (val & 0x03) {
-	case 0:
-		p->transmission_mode = TRANSMISSION_MODE_2K;
-		break;
-	case 1:
-		p->transmission_mode = TRANSMISSION_MODE_8K;
-		break;
-	}
-
-	return 0;
-}
-
-static int tda10048_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct tda10048_state *state = fe->demodulator_priv;
-	struct tda10048_config *config = &state->config;
-	dprintk(1, "%s(%d)\n", __func__, enable);
-
-	if (config->disable_gate_access)
-		return 0;
-
-	if (enable)
-		return tda10048_writereg(state, TDA10048_CONF_C4_1,
-			tda10048_readreg(state, TDA10048_CONF_C4_1) | 0x02);
-	else
-		return tda10048_writereg(state, TDA10048_CONF_C4_1,
-			tda10048_readreg(state, TDA10048_CONF_C4_1) & 0xfd);
-}
-
-static int tda10048_output_mode(struct dvb_frontend *fe, int serial)
-{
-	struct tda10048_state *state = fe->demodulator_priv;
-	dprintk(1, "%s(%d)\n", __func__, serial);
-
-	/* Ensure pins are out of tri-state */
-	tda10048_writereg(state, TDA10048_CONF_TRISTATE1, 0x21);
-	tda10048_writereg(state, TDA10048_CONF_TRISTATE2, 0x00);
-
-	if (serial) {
-		tda10048_writereg(state, TDA10048_IC_MODE, 0x80 | 0x20);
-		tda10048_writereg(state, TDA10048_CONF_TS2, 0xc0);
-	} else {
-		tda10048_writereg(state, TDA10048_IC_MODE, 0x00);
-		tda10048_writereg(state, TDA10048_CONF_TS2, 0x01);
-	}
-
-	return 0;
-}
-
-/* Talk to the demod, set the FEC, GUARD, QAM settings etc */
-/* TODO: Support manual tuning with specific params */
-static int tda10048_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct tda10048_state *state = fe->demodulator_priv;
-
-	dprintk(1, "%s(frequency=%d)\n", __func__, p->frequency);
-
-	/* Update the I/F pll's if the bandwidth changes */
-	if (p->bandwidth_hz != state->bandwidth) {
-		tda10048_set_if(fe, p->bandwidth_hz);
-		tda10048_set_bandwidth(fe, p->bandwidth_hz);
-	}
-
-	if (fe->ops.tuner_ops.set_params) {
-
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 1);
-
-		fe->ops.tuner_ops.set_params(fe);
-
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	/* Enable demod TPS auto detection and begin acquisition */
-	tda10048_writereg(state, TDA10048_AUTO, 0x57);
-	/* trigger cber and vber acquisition */
-	tda10048_writereg(state, TDA10048_CVBER_CTRL, 0x3B);
-
-	return 0;
-}
-
-/* Establish sane defaults and load firmware. */
-static int tda10048_init(struct dvb_frontend *fe)
-{
-	struct tda10048_state *state = fe->demodulator_priv;
-	struct tda10048_config *config = &state->config;
-	int ret = 0, i;
-
-	dprintk(1, "%s()\n", __func__);
-
-	/* PLL */
-	init_tab[4].data = (u8)(state->pll_mfactor);
-	init_tab[5].data = (u8)(state->pll_nfactor) | 0x40;
-
-	/* Apply register defaults */
-	for (i = 0; i < ARRAY_SIZE(init_tab); i++)
-		tda10048_writereg(state, init_tab[i].reg, init_tab[i].data);
-
-	if (state->fwloaded == 0)
-		ret = tda10048_firmware_upload(fe);
-
-	/* Set either serial or parallel */
-	tda10048_output_mode(fe, config->output_mode);
-
-	/* Set inversion */
-	tda10048_set_inversion(fe, config->inversion);
-
-	/* Establish default RF values */
-	tda10048_set_if(fe, 8000000);
-	tda10048_set_bandwidth(fe, 8000000);
-
-	/* Ensure we leave the gate closed */
-	tda10048_i2c_gate_ctrl(fe, 0);
-
-	return ret;
-}
-
-static int tda10048_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct tda10048_state *state = fe->demodulator_priv;
-	u8 reg;
-
-	*status = 0;
-
-	reg = tda10048_readreg(state, TDA10048_SYNC_STATUS);
-
-	dprintk(1, "%s() status =0x%02x\n", __func__, reg);
-
-	if (reg & 0x02)
-		*status |= FE_HAS_CARRIER;
-
-	if (reg & 0x04)
-		*status |= FE_HAS_SIGNAL;
-
-	if (reg & 0x08) {
-		*status |= FE_HAS_LOCK;
-		*status |= FE_HAS_VITERBI;
-		*status |= FE_HAS_SYNC;
-	}
-
-	return 0;
-}
-
-static int tda10048_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct tda10048_state *state = fe->demodulator_priv;
-	static u32 cber_current;
-	u32 cber_nmax;
-	u64 cber_tmp;
-
-	dprintk(1, "%s()\n", __func__);
-
-	/* update cber on interrupt */
-	if (tda10048_readreg(state, TDA10048_SOFT_IT_C3) & 0x01) {
-		cber_tmp = tda10048_readreg(state, TDA10048_CBER_MSB) << 8 |
-			tda10048_readreg(state, TDA10048_CBER_LSB);
-		cber_nmax = tda10048_readreg(state, TDA10048_CBER_NMAX_MSB) << 8 |
-			tda10048_readreg(state, TDA10048_CBER_NMAX_LSB);
-		cber_tmp *= 100000000;
-		cber_tmp *= 2;
-		cber_tmp = div_u64(cber_tmp, (cber_nmax * 32) + 1);
-		cber_current = (u32)cber_tmp;
-		/* retrigger cber acquisition */
-		tda10048_writereg(state, TDA10048_CVBER_CTRL, 0x39);
-	}
-	/* actual cber is (*ber)/1e8 */
-	*ber = cber_current;
-
-	return 0;
-}
-
-static int tda10048_read_signal_strength(struct dvb_frontend *fe,
-	u16 *signal_strength)
-{
-	struct tda10048_state *state = fe->demodulator_priv;
-	u8 v;
-
-	dprintk(1, "%s()\n", __func__);
-
-	*signal_strength = 65535;
-
-	v = tda10048_readreg(state, TDA10048_NP_OUT);
-	if (v > 0)
-		*signal_strength -= (v << 8) | v;
-
-	return 0;
-}
-
-/* SNR lookup table */
-static struct snr_tab {
-	u8 val;
-	u8 data;
-} snr_tab[] = {
-	{   0,   0 },
-	{   1, 246 },
-	{   2, 215 },
-	{   3, 198 },
-	{   4, 185 },
-	{   5, 176 },
-	{   6, 168 },
-	{   7, 161 },
-	{   8, 155 },
-	{   9, 150 },
-	{  10, 146 },
-	{  11, 141 },
-	{  12, 138 },
-	{  13, 134 },
-	{  14, 131 },
-	{  15, 128 },
-	{  16, 125 },
-	{  17, 122 },
-	{  18, 120 },
-	{  19, 118 },
-	{  20, 115 },
-	{  21, 113 },
-	{  22, 111 },
-	{  23, 109 },
-	{  24, 107 },
-	{  25, 106 },
-	{  26, 104 },
-	{  27, 102 },
-	{  28, 101 },
-	{  29,  99 },
-	{  30,  98 },
-	{  31,  96 },
-	{  32,  95 },
-	{  33,  94 },
-	{  34,  92 },
-	{  35,  91 },
-	{  36,  90 },
-	{  37,  89 },
-	{  38,  88 },
-	{  39,  86 },
-	{  40,  85 },
-	{  41,  84 },
-	{  42,  83 },
-	{  43,  82 },
-	{  44,  81 },
-	{  45,  80 },
-	{  46,  79 },
-	{  47,  78 },
-	{  48,  77 },
-	{  49,  76 },
-	{  50,  76 },
-	{  51,  75 },
-	{  52,  74 },
-	{  53,  73 },
-	{  54,  72 },
-	{  56,  71 },
-	{  57,  70 },
-	{  58,  69 },
-	{  60,  68 },
-	{  61,  67 },
-	{  63,  66 },
-	{  64,  65 },
-	{  66,  64 },
-	{  67,  63 },
-	{  68,  62 },
-	{  69,  62 },
-	{  70,  61 },
-	{  72,  60 },
-	{  74,  59 },
-	{  75,  58 },
-	{  77,  57 },
-	{  79,  56 },
-	{  81,  55 },
-	{  83,  54 },
-	{  85,  53 },
-	{  87,  52 },
-	{  89,  51 },
-	{  91,  50 },
-	{  93,  49 },
-	{  95,  48 },
-	{  97,  47 },
-	{ 100,  46 },
-	{ 102,  45 },
-	{ 104,  44 },
-	{ 107,  43 },
-	{ 109,  42 },
-	{ 112,  41 },
-	{ 114,  40 },
-	{ 117,  39 },
-	{ 120,  38 },
-	{ 123,  37 },
-	{ 125,  36 },
-	{ 128,  35 },
-	{ 131,  34 },
-	{ 134,  33 },
-	{ 138,  32 },
-	{ 141,  31 },
-	{ 144,  30 },
-	{ 147,  29 },
-	{ 151,  28 },
-	{ 154,  27 },
-	{ 158,  26 },
-	{ 162,  25 },
-	{ 165,  24 },
-	{ 169,  23 },
-	{ 173,  22 },
-	{ 177,  21 },
-	{ 181,  20 },
-	{ 186,  19 },
-	{ 190,  18 },
-	{ 194,  17 },
-	{ 199,  16 },
-	{ 204,  15 },
-	{ 208,  14 },
-	{ 213,  13 },
-	{ 218,  12 },
-	{ 223,  11 },
-	{ 229,  10 },
-	{ 234,   9 },
-	{ 239,   8 },
-	{ 245,   7 },
-	{ 251,   6 },
-	{ 255,   5 },
-};
-
-static int tda10048_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct tda10048_state *state = fe->demodulator_priv;
-	u8 v;
-	int i, ret = -EINVAL;
-
-	dprintk(1, "%s()\n", __func__);
-
-	v = tda10048_readreg(state, TDA10048_NP_OUT);
-	for (i = 0; i < ARRAY_SIZE(snr_tab); i++) {
-		if (v <= snr_tab[i].val) {
-			*snr = snr_tab[i].data;
-			ret = 0;
-			break;
-		}
-	}
-
-	return ret;
-}
-
-static int tda10048_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	struct tda10048_state *state = fe->demodulator_priv;
-
-	dprintk(1, "%s()\n", __func__);
-
-	*ucblocks = tda10048_readreg(state, TDA10048_UNCOR_CPT_MSB) << 8 |
-		tda10048_readreg(state, TDA10048_UNCOR_CPT_LSB);
-	/* clear the uncorrected TS packets counter when saturated */
-	if (*ucblocks == 0xFFFF)
-		tda10048_writereg(state, TDA10048_UNCOR_CTRL, 0x80);
-
-	return 0;
-}
-
-static int tda10048_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct tda10048_state *state = fe->demodulator_priv;
-
-	dprintk(1, "%s()\n", __func__);
-
-	p->inversion = tda10048_readreg(state, TDA10048_CONF_C1_1)
-		& 0x20 ? INVERSION_ON : INVERSION_OFF;
-
-	return tda10048_get_tps(state, p);
-}
-
-static int tda10048_get_tune_settings(struct dvb_frontend *fe,
-	struct dvb_frontend_tune_settings *tune)
-{
-	tune->min_delay_ms = 1000;
-	return 0;
-}
-
-static void tda10048_release(struct dvb_frontend *fe)
-{
-	struct tda10048_state *state = fe->demodulator_priv;
-	dprintk(1, "%s()\n", __func__);
-	kfree(state);
-}
-
-static void tda10048_establish_defaults(struct dvb_frontend *fe)
-{
-	struct tda10048_state *state = fe->demodulator_priv;
-	struct tda10048_config *config = &state->config;
-
-	/* Validate/default the config */
-	if (config->dtv6_if_freq_khz == 0) {
-		config->dtv6_if_freq_khz = TDA10048_IF_4300;
-		printk(KERN_WARNING "%s() tda10048_config.dtv6_if_freq_khz "
-			"is not set (defaulting to %d)\n",
-			__func__,
-			config->dtv6_if_freq_khz);
-	}
-
-	if (config->dtv7_if_freq_khz == 0) {
-		config->dtv7_if_freq_khz = TDA10048_IF_4300;
-		printk(KERN_WARNING "%s() tda10048_config.dtv7_if_freq_khz "
-			"is not set (defaulting to %d)\n",
-			__func__,
-			config->dtv7_if_freq_khz);
-	}
-
-	if (config->dtv8_if_freq_khz == 0) {
-		config->dtv8_if_freq_khz = TDA10048_IF_4300;
-		printk(KERN_WARNING "%s() tda10048_config.dtv8_if_freq_khz "
-			"is not set (defaulting to %d)\n",
-			__func__,
-			config->dtv8_if_freq_khz);
-	}
-
-	if (config->clk_freq_khz == 0) {
-		config->clk_freq_khz = TDA10048_CLK_16000;
-		printk(KERN_WARNING "%s() tda10048_config.clk_freq_khz "
-			"is not set (defaulting to %d)\n",
-			__func__,
-			config->clk_freq_khz);
-	}
-}
-
-static struct dvb_frontend_ops tda10048_ops;
-
-struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
-	struct i2c_adapter *i2c)
-{
-	struct tda10048_state *state = NULL;
-
-	dprintk(1, "%s()\n", __func__);
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct tda10048_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state and clone the config */
-	memcpy(&state->config, config, sizeof(*config));
-	state->i2c = i2c;
-	state->fwloaded = config->no_firmware;
-	state->bandwidth = 8000000;
-
-	/* check if the demod is present */
-	if (tda10048_readreg(state, TDA10048_IDENTITY) != 0x048)
-		goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &tda10048_ops,
-		sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-
-	/* set pll */
-	if (config->set_pll) {
-		state->pll_mfactor = config->pll_m;
-		state->pll_nfactor = config->pll_n;
-		state->pll_pfactor = config->pll_p;
-	} else {
-		state->pll_mfactor = 10;
-		state->pll_nfactor = 3;
-		state->pll_pfactor = 0;
-	}
-
-	/* Establish any defaults the the user didn't pass */
-	tda10048_establish_defaults(&state->frontend);
-
-	/* Set the xtal and freq defaults */
-	if (tda10048_set_if(&state->frontend, 8000000) != 0)
-		goto error;
-
-	/* Default bandwidth */
-	if (tda10048_set_bandwidth(&state->frontend, 8000000) != 0)
-		goto error;
-
-	/* Leave the gate closed */
-	tda10048_i2c_gate_ctrl(&state->frontend, 0);
-
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(tda10048_attach);
-
-static struct dvb_frontend_ops tda10048_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name			= "NXP TDA10048HN DVB-T",
-		.frequency_min		= 177000000,
-		.frequency_max		= 858000000,
-		.frequency_stepsize	= 166666,
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-		FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-		FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-		FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
-		FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER
-	},
-
-	.release = tda10048_release,
-	.init = tda10048_init,
-	.i2c_gate_ctrl = tda10048_i2c_gate_ctrl,
-	.set_frontend = tda10048_set_frontend,
-	.get_frontend = tda10048_get_frontend,
-	.get_tune_settings = tda10048_get_tune_settings,
-	.read_status = tda10048_read_status,
-	.read_ber = tda10048_read_ber,
-	.read_signal_strength = tda10048_read_signal_strength,
-	.read_snr = tda10048_read_snr,
-	.read_ucblocks = tda10048_read_ucblocks,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Enable verbose debug messages");
-
-MODULE_DESCRIPTION("NXP TDA10048HN DVB-T Demodulator driver");
-MODULE_AUTHOR("Steven Toth");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/tda10048.h b/drivers/media/dvb/frontends/tda10048.h
deleted file mode 100644
index fb2ef5a..0000000
--- a/drivers/media/dvb/frontends/tda10048.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
-    NXP TDA10048HN DVB OFDM demodulator driver
-
-    Copyright (C) 2009 Steven Toth <stoth@kernellabs.com>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef TDA10048_H
-#define TDA10048_H
-
-#include <linux/dvb/frontend.h>
-#include <linux/firmware.h>
-
-struct tda10048_config {
-
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* serial/parallel output */
-#define TDA10048_PARALLEL_OUTPUT 0
-#define TDA10048_SERIAL_OUTPUT   1
-	u8 output_mode;
-
-#define TDA10048_BULKWRITE_200	200
-#define TDA10048_BULKWRITE_50	50
-	u8 fwbulkwritelen;
-
-	/* Spectral Inversion */
-#define TDA10048_INVERSION_OFF 0
-#define TDA10048_INVERSION_ON  1
-	u8 inversion;
-
-#define TDA10048_IF_3300  3300
-#define TDA10048_IF_3500  3500
-#define TDA10048_IF_3800  3800
-#define TDA10048_IF_4000  4000
-#define TDA10048_IF_4300  4300
-#define TDA10048_IF_4500  4500
-#define TDA10048_IF_4750  4750
-#define TDA10048_IF_5000  5000
-#define TDA10048_IF_36130 36130
-	u16 dtv6_if_freq_khz;
-	u16 dtv7_if_freq_khz;
-	u16 dtv8_if_freq_khz;
-
-#define TDA10048_CLK_4000  4000
-#define TDA10048_CLK_16000 16000
-	u16 clk_freq_khz;
-
-	/* Disable I2C gate access */
-	u8 disable_gate_access;
-
-	bool no_firmware;
-
-	bool set_pll;
-	u8 pll_m;
-	u8 pll_p;
-	u8 pll_n;
-};
-
-#if defined(CONFIG_DVB_TDA10048) || \
-	(defined(CONFIG_DVB_TDA10048_MODULE) && defined(MODULE))
-extern struct dvb_frontend *tda10048_attach(
-	const struct tda10048_config *config,
-	struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *tda10048_attach(
-	const struct tda10048_config *config,
-	struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_TDA10048 */
-
-#endif /* TDA10048_H */
diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c
deleted file mode 100644
index 35d72b4..0000000
--- a/drivers/media/dvb/frontends/tda1004x.c
+++ /dev/null
@@ -1,1381 +0,0 @@
-  /*
-     Driver for Philips tda1004xh OFDM Demodulator
-
-     (c) 2003, 2004 Andrew de Quincey & Robert Schlabbach
-
-     This program is free software; you can redistribute it and/or modify
-     it under the terms of the GNU General Public License as published by
-     the Free Software Foundation; either version 2 of the License, or
-     (at your option) any later version.
-
-     This program is distributed in the hope that it will be useful,
-     but WITHOUT ANY WARRANTY; without even the implied warranty of
-     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
-     GNU General Public License for more details.
-
-     You should have received a copy of the GNU General Public License
-     along with this program; if not, write to the Free Software
-     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-   */
-/*
- * This driver needs external firmware. Please use the commands
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10045",
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10046" to
- * download/extract them, and then copy them to /usr/lib/hotplug/firmware
- * or /lib/firmware (depending on configuration of firmware hotplug).
- */
-#define TDA10045_DEFAULT_FIRMWARE "dvb-fe-tda10045.fw"
-#define TDA10046_DEFAULT_FIRMWARE "dvb-fe-tda10046.fw"
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/jiffies.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "tda1004x.h"
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "tda1004x: " args); \
-	} while (0)
-
-#define TDA1004X_CHIPID		 0x00
-#define TDA1004X_AUTO		 0x01
-#define TDA1004X_IN_CONF1	 0x02
-#define TDA1004X_IN_CONF2	 0x03
-#define TDA1004X_OUT_CONF1	 0x04
-#define TDA1004X_OUT_CONF2	 0x05
-#define TDA1004X_STATUS_CD	 0x06
-#define TDA1004X_CONFC4		 0x07
-#define TDA1004X_DSSPARE2	 0x0C
-#define TDA10045H_CODE_IN	 0x0D
-#define TDA10045H_FWPAGE	 0x0E
-#define TDA1004X_SCAN_CPT	 0x10
-#define TDA1004X_DSP_CMD	 0x11
-#define TDA1004X_DSP_ARG	 0x12
-#define TDA1004X_DSP_DATA1	 0x13
-#define TDA1004X_DSP_DATA2	 0x14
-#define TDA1004X_CONFADC1	 0x15
-#define TDA1004X_CONFC1		 0x16
-#define TDA10045H_S_AGC		 0x1a
-#define TDA10046H_AGC_TUN_LEVEL	 0x1a
-#define TDA1004X_SNR		 0x1c
-#define TDA1004X_CONF_TS1	 0x1e
-#define TDA1004X_CONF_TS2	 0x1f
-#define TDA1004X_CBER_RESET	 0x20
-#define TDA1004X_CBER_MSB	 0x21
-#define TDA1004X_CBER_LSB	 0x22
-#define TDA1004X_CVBER_LUT	 0x23
-#define TDA1004X_VBER_MSB	 0x24
-#define TDA1004X_VBER_MID	 0x25
-#define TDA1004X_VBER_LSB	 0x26
-#define TDA1004X_UNCOR		 0x27
-
-#define TDA10045H_CONFPLL_P	 0x2D
-#define TDA10045H_CONFPLL_M_MSB	 0x2E
-#define TDA10045H_CONFPLL_M_LSB	 0x2F
-#define TDA10045H_CONFPLL_N	 0x30
-
-#define TDA10046H_CONFPLL1	 0x2D
-#define TDA10046H_CONFPLL2	 0x2F
-#define TDA10046H_CONFPLL3	 0x30
-#define TDA10046H_TIME_WREF1	 0x31
-#define TDA10046H_TIME_WREF2	 0x32
-#define TDA10046H_TIME_WREF3	 0x33
-#define TDA10046H_TIME_WREF4	 0x34
-#define TDA10046H_TIME_WREF5	 0x35
-
-#define TDA10045H_UNSURW_MSB	 0x31
-#define TDA10045H_UNSURW_LSB	 0x32
-#define TDA10045H_WREF_MSB	 0x33
-#define TDA10045H_WREF_MID	 0x34
-#define TDA10045H_WREF_LSB	 0x35
-#define TDA10045H_MUXOUT	 0x36
-#define TDA1004X_CONFADC2	 0x37
-
-#define TDA10045H_IOFFSET	 0x38
-
-#define TDA10046H_CONF_TRISTATE1 0x3B
-#define TDA10046H_CONF_TRISTATE2 0x3C
-#define TDA10046H_CONF_POLARITY	 0x3D
-#define TDA10046H_FREQ_OFFSET	 0x3E
-#define TDA10046H_GPIO_OUT_SEL	 0x41
-#define TDA10046H_GPIO_SELECT	 0x42
-#define TDA10046H_AGC_CONF	 0x43
-#define TDA10046H_AGC_THR	 0x44
-#define TDA10046H_AGC_RENORM	 0x45
-#define TDA10046H_AGC_GAINS	 0x46
-#define TDA10046H_AGC_TUN_MIN	 0x47
-#define TDA10046H_AGC_TUN_MAX	 0x48
-#define TDA10046H_AGC_IF_MIN	 0x49
-#define TDA10046H_AGC_IF_MAX	 0x4A
-
-#define TDA10046H_FREQ_PHY2_MSB	 0x4D
-#define TDA10046H_FREQ_PHY2_LSB	 0x4E
-
-#define TDA10046H_CVBER_CTRL	 0x4F
-#define TDA10046H_AGC_IF_LEVEL	 0x52
-#define TDA10046H_CODE_CPT	 0x57
-#define TDA10046H_CODE_IN	 0x58
-
-
-static int tda1004x_write_byteI(struct tda1004x_state *state, int reg, int data)
-{
-	int ret;
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg = { .flags = 0, .buf = buf, .len = 2 };
-
-	dprintk("%s: reg=0x%x, data=0x%x\n", __func__, reg, data);
-
-	msg.addr = state->config->demod_address;
-	ret = i2c_transfer(state->i2c, &msg, 1);
-
-	if (ret != 1)
-		dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n",
-			__func__, reg, data, ret);
-
-	dprintk("%s: success reg=0x%x, data=0x%x, ret=%i\n", __func__,
-		reg, data, ret);
-	return (ret != 1) ? -1 : 0;
-}
-
-static int tda1004x_read_byte(struct tda1004x_state *state, int reg)
-{
-	int ret;
-	u8 b0[] = { reg };
-	u8 b1[] = { 0 };
-	struct i2c_msg msg[] = {{ .flags = 0, .buf = b0, .len = 1 },
-				{ .flags = I2C_M_RD, .buf = b1, .len = 1 }};
-
-	dprintk("%s: reg=0x%x\n", __func__, reg);
-
-	msg[0].addr = state->config->demod_address;
-	msg[1].addr = state->config->demod_address;
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2) {
-		dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg,
-			ret);
-		return -EINVAL;
-	}
-
-	dprintk("%s: success reg=0x%x, data=0x%x, ret=%i\n", __func__,
-		reg, b1[0], ret);
-	return b1[0];
-}
-
-static int tda1004x_write_mask(struct tda1004x_state *state, int reg, int mask, int data)
-{
-	int val;
-	dprintk("%s: reg=0x%x, mask=0x%x, data=0x%x\n", __func__, reg,
-		mask, data);
-
-	// read a byte and check
-	val = tda1004x_read_byte(state, reg);
-	if (val < 0)
-		return val;
-
-	// mask if off
-	val = val & ~mask;
-	val |= data & 0xff;
-
-	// write it out again
-	return tda1004x_write_byteI(state, reg, val);
-}
-
-static int tda1004x_write_buf(struct tda1004x_state *state, int reg, unsigned char *buf, int len)
-{
-	int i;
-	int result;
-
-	dprintk("%s: reg=0x%x, len=0x%x\n", __func__, reg, len);
-
-	result = 0;
-	for (i = 0; i < len; i++) {
-		result = tda1004x_write_byteI(state, reg + i, buf[i]);
-		if (result != 0)
-			break;
-	}
-
-	return result;
-}
-
-static int tda1004x_enable_tuner_i2c(struct tda1004x_state *state)
-{
-	int result;
-	dprintk("%s\n", __func__);
-
-	result = tda1004x_write_mask(state, TDA1004X_CONFC4, 2, 2);
-	msleep(20);
-	return result;
-}
-
-static int tda1004x_disable_tuner_i2c(struct tda1004x_state *state)
-{
-	dprintk("%s\n", __func__);
-
-	return tda1004x_write_mask(state, TDA1004X_CONFC4, 2, 0);
-}
-
-static int tda10045h_set_bandwidth(struct tda1004x_state *state,
-				   u32 bandwidth)
-{
-	static u8 bandwidth_6mhz[] = { 0x02, 0x00, 0x3d, 0x00, 0x60, 0x1e, 0xa7, 0x45, 0x4f };
-	static u8 bandwidth_7mhz[] = { 0x02, 0x00, 0x37, 0x00, 0x4a, 0x2f, 0x6d, 0x76, 0xdb };
-	static u8 bandwidth_8mhz[] = { 0x02, 0x00, 0x3d, 0x00, 0x48, 0x17, 0x89, 0xc7, 0x14 };
-
-	switch (bandwidth) {
-	case 6000000:
-		tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_6mhz, sizeof(bandwidth_6mhz));
-		break;
-
-	case 7000000:
-		tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_7mhz, sizeof(bandwidth_7mhz));
-		break;
-
-	case 8000000:
-		tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_8mhz, sizeof(bandwidth_8mhz));
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	tda1004x_write_byteI(state, TDA10045H_IOFFSET, 0);
-
-	return 0;
-}
-
-static int tda10046h_set_bandwidth(struct tda1004x_state *state,
-				   u32 bandwidth)
-{
-	static u8 bandwidth_6mhz_53M[] = { 0x7b, 0x2e, 0x11, 0xf0, 0xd2 };
-	static u8 bandwidth_7mhz_53M[] = { 0x6a, 0x02, 0x6a, 0x43, 0x9f };
-	static u8 bandwidth_8mhz_53M[] = { 0x5c, 0x32, 0xc2, 0x96, 0x6d };
-
-	static u8 bandwidth_6mhz_48M[] = { 0x70, 0x02, 0x49, 0x24, 0x92 };
-	static u8 bandwidth_7mhz_48M[] = { 0x60, 0x02, 0xaa, 0xaa, 0xab };
-	static u8 bandwidth_8mhz_48M[] = { 0x54, 0x03, 0x0c, 0x30, 0xc3 };
-	int tda10046_clk53m;
-
-	if ((state->config->if_freq == TDA10046_FREQ_045) ||
-	    (state->config->if_freq == TDA10046_FREQ_052))
-		tda10046_clk53m = 0;
-	else
-		tda10046_clk53m = 1;
-	switch (bandwidth) {
-	case 6000000:
-		if (tda10046_clk53m)
-			tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz_53M,
-						  sizeof(bandwidth_6mhz_53M));
-		else
-			tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz_48M,
-						  sizeof(bandwidth_6mhz_48M));
-		if (state->config->if_freq == TDA10046_FREQ_045) {
-			tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0a);
-			tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xab);
-		}
-		break;
-
-	case 7000000:
-		if (tda10046_clk53m)
-			tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz_53M,
-						  sizeof(bandwidth_7mhz_53M));
-		else
-			tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz_48M,
-						  sizeof(bandwidth_7mhz_48M));
-		if (state->config->if_freq == TDA10046_FREQ_045) {
-			tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c);
-			tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00);
-		}
-		break;
-
-	case 8000000:
-		if (tda10046_clk53m)
-			tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz_53M,
-						  sizeof(bandwidth_8mhz_53M));
-		else
-			tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz_48M,
-						  sizeof(bandwidth_8mhz_48M));
-		if (state->config->if_freq == TDA10046_FREQ_045) {
-			tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0d);
-			tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x55);
-		}
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int tda1004x_do_upload(struct tda1004x_state *state,
-			      const unsigned char *mem, unsigned int len,
-			      u8 dspCodeCounterReg, u8 dspCodeInReg)
-{
-	u8 buf[65];
-	struct i2c_msg fw_msg = { .flags = 0, .buf = buf, .len = 0 };
-	int tx_size;
-	int pos = 0;
-
-	/* clear code counter */
-	tda1004x_write_byteI(state, dspCodeCounterReg, 0);
-	fw_msg.addr = state->config->demod_address;
-
-	buf[0] = dspCodeInReg;
-	while (pos != len) {
-		// work out how much to send this time
-		tx_size = len - pos;
-		if (tx_size > 0x10)
-			tx_size = 0x10;
-
-		// send the chunk
-		memcpy(buf + 1, mem + pos, tx_size);
-		fw_msg.len = tx_size + 1;
-		if (i2c_transfer(state->i2c, &fw_msg, 1) != 1) {
-			printk(KERN_ERR "tda1004x: Error during firmware upload\n");
-			return -EIO;
-		}
-		pos += tx_size;
-
-		dprintk("%s: fw_pos=0x%x\n", __func__, pos);
-	}
-	// give the DSP a chance to settle 03/10/05 Hac
-	msleep(100);
-
-	return 0;
-}
-
-static int tda1004x_check_upload_ok(struct tda1004x_state *state)
-{
-	u8 data1, data2;
-	unsigned long timeout;
-
-	if (state->demod_type == TDA1004X_DEMOD_TDA10046) {
-		timeout = jiffies + 2 * HZ;
-		while(!(tda1004x_read_byte(state, TDA1004X_STATUS_CD) & 0x20)) {
-			if (time_after(jiffies, timeout)) {
-				printk(KERN_ERR "tda1004x: timeout waiting for DSP ready\n");
-				break;
-			}
-			msleep(1);
-		}
-	} else
-		msleep(100);
-
-	// check upload was OK
-	tda1004x_write_mask(state, TDA1004X_CONFC4, 0x10, 0); // we want to read from the DSP
-	tda1004x_write_byteI(state, TDA1004X_DSP_CMD, 0x67);
-
-	data1 = tda1004x_read_byte(state, TDA1004X_DSP_DATA1);
-	data2 = tda1004x_read_byte(state, TDA1004X_DSP_DATA2);
-	if (data1 != 0x67 || data2 < 0x20 || data2 > 0x2e) {
-		printk(KERN_INFO "tda1004x: found firmware revision %x -- invalid\n", data2);
-		return -EIO;
-	}
-	printk(KERN_INFO "tda1004x: found firmware revision %x -- ok\n", data2);
-	return 0;
-}
-
-static int tda10045_fwupload(struct dvb_frontend* fe)
-{
-	struct tda1004x_state* state = fe->demodulator_priv;
-	int ret;
-	const struct firmware *fw;
-
-	/* don't re-upload unless necessary */
-	if (tda1004x_check_upload_ok(state) == 0)
-		return 0;
-
-	/* request the firmware, this will block until someone uploads it */
-	printk(KERN_INFO "tda1004x: waiting for firmware upload (%s)...\n", TDA10045_DEFAULT_FIRMWARE);
-	ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE);
-	if (ret) {
-		printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");
-		return ret;
-	}
-
-	/* reset chip */
-	tda1004x_write_mask(state, TDA1004X_CONFC4, 0x10, 0);
-	tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8);
-	tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 0);
-	msleep(10);
-
-	/* set parameters */
-	tda10045h_set_bandwidth(state, 8000000);
-
-	ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10045H_FWPAGE, TDA10045H_CODE_IN);
-	release_firmware(fw);
-	if (ret)
-		return ret;
-	printk(KERN_INFO "tda1004x: firmware upload complete\n");
-
-	/* wait for DSP to initialise */
-	/* DSPREADY doesn't seem to work on the TDA10045H */
-	msleep(100);
-
-	return tda1004x_check_upload_ok(state);
-}
-
-static void tda10046_init_plls(struct dvb_frontend* fe)
-{
-	struct tda1004x_state* state = fe->demodulator_priv;
-	int tda10046_clk53m;
-
-	if ((state->config->if_freq == TDA10046_FREQ_045) ||
-	    (state->config->if_freq == TDA10046_FREQ_052))
-		tda10046_clk53m = 0;
-	else
-		tda10046_clk53m = 1;
-
-	tda1004x_write_byteI(state, TDA10046H_CONFPLL1, 0xf0);
-	if(tda10046_clk53m) {
-		printk(KERN_INFO "tda1004x: setting up plls for 53MHz sampling clock\n");
-		tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x08); // PLL M = 8
-	} else {
-		printk(KERN_INFO "tda1004x: setting up plls for 48MHz sampling clock\n");
-		tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x03); // PLL M = 3
-	}
-	if (state->config->xtal_freq == TDA10046_XTAL_4M ) {
-		dprintk("%s: setting up PLLs for a 4 MHz Xtal\n", __func__);
-		tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 0); // PLL P = N = 0
-	} else {
-		dprintk("%s: setting up PLLs for a 16 MHz Xtal\n", __func__);
-		tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 3); // PLL P = 0, N = 3
-	}
-	if(tda10046_clk53m)
-		tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 0x67);
-	else
-		tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 0x72);
-	/* Note clock frequency is handled implicitly */
-	switch (state->config->if_freq) {
-	case TDA10046_FREQ_045:
-		tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c);
-		tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00);
-		break;
-	case TDA10046_FREQ_052:
-		tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0d);
-		tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xc7);
-		break;
-	case TDA10046_FREQ_3617:
-		tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd7);
-		tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x59);
-		break;
-	case TDA10046_FREQ_3613:
-		tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd7);
-		tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x3f);
-		break;
-	}
-	tda10046h_set_bandwidth(state, 8000000); /* default bandwidth 8 MHz */
-	/* let the PLLs settle */
-	msleep(120);
-}
-
-static int tda10046_fwupload(struct dvb_frontend* fe)
-{
-	struct tda1004x_state* state = fe->demodulator_priv;
-	int ret, confc4;
-	const struct firmware *fw;
-
-	/* reset + wake up chip */
-	if (state->config->xtal_freq == TDA10046_XTAL_4M) {
-		confc4 = 0;
-	} else {
-		dprintk("%s: 16MHz Xtal, reducing I2C speed\n", __func__);
-		confc4 = 0x80;
-	}
-	tda1004x_write_byteI(state, TDA1004X_CONFC4, confc4);
-
-	tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 1, 0);
-	/* set GPIO 1 and 3 */
-	if (state->config->gpio_config != TDA10046_GPTRI) {
-		tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE2, 0x33);
-		tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x0f, state->config->gpio_config &0x0f);
-	}
-	/* let the clocks recover from sleep */
-	msleep(10);
-
-	/* The PLLs need to be reprogrammed after sleep */
-	tda10046_init_plls(fe);
-	tda1004x_write_mask(state, TDA1004X_CONFADC2, 0xc0, 0);
-
-	/* don't re-upload unless necessary */
-	if (tda1004x_check_upload_ok(state) == 0)
-		return 0;
-
-	/*
-	   For i2c normal work, we need to slow down the bus speed.
-	   However, the slow down breaks the eeprom firmware load.
-	   So, use normal speed for eeprom booting and then restore the
-	   i2c speed after that. Tested with MSI TV @nyware A/D board,
-	   that comes with firmware version 29 inside their eeprom.
-
-	   It should also be noticed that no other I2C transfer should
-	   be in course while booting from eeprom, otherwise, tda10046
-	   goes into an instable state. So, proper locking are needed
-	   at the i2c bus master.
-	 */
-	printk(KERN_INFO "tda1004x: trying to boot from eeprom\n");
-	tda1004x_write_byteI(state, TDA1004X_CONFC4, 4);
-	msleep(300);
-	tda1004x_write_byteI(state, TDA1004X_CONFC4, confc4);
-
-	/* Checks if eeprom firmware went without troubles */
-	if (tda1004x_check_upload_ok(state) == 0)
-		return 0;
-
-	/* eeprom firmware didn't work. Load one manually. */
-
-	if (state->config->request_firmware != NULL) {
-		/* request the firmware, this will block until someone uploads it */
-		printk(KERN_INFO "tda1004x: waiting for firmware upload...\n");
-		ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE);
-		if (ret) {
-			/* remain compatible to old bug: try to load with tda10045 image name */
-			ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE);
-			if (ret) {
-				printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");
-				return ret;
-			} else {
-				printk(KERN_INFO "tda1004x: please rename the firmware file to %s\n",
-						  TDA10046_DEFAULT_FIRMWARE);
-			}
-		}
-	} else {
-		printk(KERN_ERR "tda1004x: no request function defined, can't upload from file\n");
-		return -EIO;
-	}
-	tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST
-	ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN);
-	release_firmware(fw);
-	return tda1004x_check_upload_ok(state);
-}
-
-static int tda1004x_encode_fec(int fec)
-{
-	// convert known FEC values
-	switch (fec) {
-	case FEC_1_2:
-		return 0;
-	case FEC_2_3:
-		return 1;
-	case FEC_3_4:
-		return 2;
-	case FEC_5_6:
-		return 3;
-	case FEC_7_8:
-		return 4;
-	}
-
-	// unsupported
-	return -EINVAL;
-}
-
-static int tda1004x_decode_fec(int tdafec)
-{
-	// convert known FEC values
-	switch (tdafec) {
-	case 0:
-		return FEC_1_2;
-	case 1:
-		return FEC_2_3;
-	case 2:
-		return FEC_3_4;
-	case 3:
-		return FEC_5_6;
-	case 4:
-		return FEC_7_8;
-	}
-
-	// unsupported
-	return -1;
-}
-
-static int tda1004x_write(struct dvb_frontend* fe, const u8 buf[], int len)
-{
-	struct tda1004x_state* state = fe->demodulator_priv;
-
-	if (len != 2)
-		return -EINVAL;
-
-	return tda1004x_write_byteI(state, buf[0], buf[1]);
-}
-
-static int tda10045_init(struct dvb_frontend* fe)
-{
-	struct tda1004x_state* state = fe->demodulator_priv;
-
-	dprintk("%s\n", __func__);
-
-	if (tda10045_fwupload(fe)) {
-		printk("tda1004x: firmware upload failed\n");
-		return -EIO;
-	}
-
-	tda1004x_write_mask(state, TDA1004X_CONFADC1, 0x10, 0); // wake up the ADC
-
-	// tda setup
-	tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer
-	tda1004x_write_mask(state, TDA1004X_AUTO, 8, 0); // select HP stream
-	tda1004x_write_mask(state, TDA1004X_CONFC1, 0x40, 0); // set polarity of VAGC signal
-	tda1004x_write_mask(state, TDA1004X_CONFC1, 0x80, 0x80); // enable pulse killer
-	tda1004x_write_mask(state, TDA1004X_AUTO, 0x10, 0x10); // enable auto offset
-	tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0xC0, 0x0); // no frequency offset
-	tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 0); // setup MPEG2 TS interface
-	tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0); // setup MPEG2 TS interface
-	tda1004x_write_mask(state, TDA1004X_VBER_MSB, 0xe0, 0xa0); // 10^6 VBER measurement bits
-	tda1004x_write_mask(state, TDA1004X_CONFC1, 0x10, 0); // VAGC polarity
-	tda1004x_write_byteI(state, TDA1004X_CONFADC1, 0x2e);
-
-	tda1004x_write_mask(state, 0x1f, 0x01, state->config->invert_oclk);
-
-	return 0;
-}
-
-static int tda10046_init(struct dvb_frontend* fe)
-{
-	struct tda1004x_state* state = fe->demodulator_priv;
-	dprintk("%s\n", __func__);
-
-	if (tda10046_fwupload(fe)) {
-		printk("tda1004x: firmware upload failed\n");
-			return -EIO;
-	}
-
-	// tda setup
-	tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer
-	tda1004x_write_byteI(state, TDA1004X_AUTO, 0x87);    // 100 ppm crystal, select HP stream
-	tda1004x_write_byteI(state, TDA1004X_CONFC1, 0x88);      // enable pulse killer
-
-	switch (state->config->agc_config) {
-	case TDA10046_AGC_DEFAULT:
-		tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x00); // AGC setup
-		tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60);  // set AGC polarities
-		break;
-	case TDA10046_AGC_IFO_AUTO_NEG:
-		tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
-		tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60);  // set AGC polarities
-		break;
-	case TDA10046_AGC_IFO_AUTO_POS:
-		tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
-		tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x00);  // set AGC polarities
-		break;
-	case TDA10046_AGC_TDA827X:
-		tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02);   // AGC setup
-		tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70);    // AGC Threshold
-		tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
-		tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60);  // set AGC polarities
-		break;
-	}
-	if (state->config->ts_mode == 0) {
-		tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 0xc0, 0x40);
-		tda1004x_write_mask(state, 0x3a, 0x80, state->config->invert_oclk << 7);
-	} else {
-		tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 0xc0, 0x80);
-		tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x10,
-							state->config->invert_oclk << 4);
-	}
-	tda1004x_write_byteI(state, TDA1004X_CONFADC2, 0x38);
-	tda1004x_write_mask (state, TDA10046H_CONF_TRISTATE1, 0x3e, 0x38); // Turn IF AGC output on
-	tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MIN, 0);	  // }
-	tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MAX, 0xff); // } AGC min/max values
-	tda1004x_write_byteI(state, TDA10046H_AGC_IF_MIN, 0);	  // }
-	tda1004x_write_byteI(state, TDA10046H_AGC_IF_MAX, 0xff);  // }
-	tda1004x_write_byteI(state, TDA10046H_AGC_GAINS, 0x12); // IF gain 2, TUN gain 1
-	tda1004x_write_byteI(state, TDA10046H_CVBER_CTRL, 0x1a); // 10^6 VBER measurement bits
-	tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 7); // MPEG2 interface config
-	tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0xc0); // MPEG2 interface config
-	// tda1004x_write_mask(state, 0x50, 0x80, 0x80);         // handle out of guard echoes
-
-	return 0;
-}
-
-static int tda1004x_set_fe(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *fe_params = &fe->dtv_property_cache;
-	struct tda1004x_state* state = fe->demodulator_priv;
-	int tmp;
-	int inversion;
-
-	dprintk("%s\n", __func__);
-
-	if (state->demod_type == TDA1004X_DEMOD_TDA10046) {
-		// setup auto offset
-		tda1004x_write_mask(state, TDA1004X_AUTO, 0x10, 0x10);
-		tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x80, 0);
-		tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0xC0, 0);
-
-		// disable agc_conf[2]
-		tda1004x_write_mask(state, TDA10046H_AGC_CONF, 4, 0);
-	}
-
-	// set frequency
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	// Hardcoded to use auto as much as possible on the TDA10045 as it
-	// is very unreliable if AUTO mode is _not_ used.
-	if (state->demod_type == TDA1004X_DEMOD_TDA10045) {
-		fe_params->code_rate_HP = FEC_AUTO;
-		fe_params->guard_interval = GUARD_INTERVAL_AUTO;
-		fe_params->transmission_mode = TRANSMISSION_MODE_AUTO;
-	}
-
-	// Set standard params.. or put them to auto
-	if ((fe_params->code_rate_HP == FEC_AUTO) ||
-		(fe_params->code_rate_LP == FEC_AUTO) ||
-		(fe_params->modulation == QAM_AUTO) ||
-		(fe_params->hierarchy == HIERARCHY_AUTO)) {
-		tda1004x_write_mask(state, TDA1004X_AUTO, 1, 1);	// enable auto
-		tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x03, 0);	/* turn off modulation bits */
-		tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 0);	// turn off hierarchy bits
-		tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0x3f, 0);	// turn off FEC bits
-	} else {
-		tda1004x_write_mask(state, TDA1004X_AUTO, 1, 0);	// disable auto
-
-		// set HP FEC
-		tmp = tda1004x_encode_fec(fe_params->code_rate_HP);
-		if (tmp < 0)
-			return tmp;
-		tda1004x_write_mask(state, TDA1004X_IN_CONF2, 7, tmp);
-
-		// set LP FEC
-		tmp = tda1004x_encode_fec(fe_params->code_rate_LP);
-		if (tmp < 0)
-			return tmp;
-		tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0x38, tmp << 3);
-
-		/* set modulation */
-		switch (fe_params->modulation) {
-		case QPSK:
-			tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 0);
-			break;
-
-		case QAM_16:
-			tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 1);
-			break;
-
-		case QAM_64:
-			tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 2);
-			break;
-
-		default:
-			return -EINVAL;
-		}
-
-		// set hierarchy
-		switch (fe_params->hierarchy) {
-		case HIERARCHY_NONE:
-			tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 0 << 5);
-			break;
-
-		case HIERARCHY_1:
-			tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 1 << 5);
-			break;
-
-		case HIERARCHY_2:
-			tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 2 << 5);
-			break;
-
-		case HIERARCHY_4:
-			tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 3 << 5);
-			break;
-
-		default:
-			return -EINVAL;
-		}
-	}
-
-	// set bandwidth
-	switch (state->demod_type) {
-	case TDA1004X_DEMOD_TDA10045:
-		tda10045h_set_bandwidth(state, fe_params->bandwidth_hz);
-		break;
-
-	case TDA1004X_DEMOD_TDA10046:
-		tda10046h_set_bandwidth(state, fe_params->bandwidth_hz);
-		break;
-	}
-
-	// set inversion
-	inversion = fe_params->inversion;
-	if (state->config->invert)
-		inversion = inversion ? INVERSION_OFF : INVERSION_ON;
-	switch (inversion) {
-	case INVERSION_OFF:
-		tda1004x_write_mask(state, TDA1004X_CONFC1, 0x20, 0);
-		break;
-
-	case INVERSION_ON:
-		tda1004x_write_mask(state, TDA1004X_CONFC1, 0x20, 0x20);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	// set guard interval
-	switch (fe_params->guard_interval) {
-	case GUARD_INTERVAL_1_32:
-		tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);
-		tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 0 << 2);
-		break;
-
-	case GUARD_INTERVAL_1_16:
-		tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);
-		tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 1 << 2);
-		break;
-
-	case GUARD_INTERVAL_1_8:
-		tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);
-		tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 2 << 2);
-		break;
-
-	case GUARD_INTERVAL_1_4:
-		tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);
-		tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 3 << 2);
-		break;
-
-	case GUARD_INTERVAL_AUTO:
-		tda1004x_write_mask(state, TDA1004X_AUTO, 2, 2);
-		tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 0 << 2);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	// set transmission mode
-	switch (fe_params->transmission_mode) {
-	case TRANSMISSION_MODE_2K:
-		tda1004x_write_mask(state, TDA1004X_AUTO, 4, 0);
-		tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 0 << 4);
-		break;
-
-	case TRANSMISSION_MODE_8K:
-		tda1004x_write_mask(state, TDA1004X_AUTO, 4, 0);
-		tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 1 << 4);
-		break;
-
-	case TRANSMISSION_MODE_AUTO:
-		tda1004x_write_mask(state, TDA1004X_AUTO, 4, 4);
-		tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 0);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	// start the lock
-	switch (state->demod_type) {
-	case TDA1004X_DEMOD_TDA10045:
-		tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8);
-		tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 0);
-		break;
-
-	case TDA1004X_DEMOD_TDA10046:
-		tda1004x_write_mask(state, TDA1004X_AUTO, 0x40, 0x40);
-		msleep(1);
-		tda1004x_write_mask(state, TDA10046H_AGC_CONF, 4, 1);
-		break;
-	}
-
-	msleep(10);
-
-	return 0;
-}
-
-static int tda1004x_get_fe(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *fe_params = &fe->dtv_property_cache;
-	struct tda1004x_state* state = fe->demodulator_priv;
-
-	dprintk("%s\n", __func__);
-
-	// inversion status
-	fe_params->inversion = INVERSION_OFF;
-	if (tda1004x_read_byte(state, TDA1004X_CONFC1) & 0x20)
-		fe_params->inversion = INVERSION_ON;
-	if (state->config->invert)
-		fe_params->inversion = fe_params->inversion ? INVERSION_OFF : INVERSION_ON;
-
-	// bandwidth
-	switch (state->demod_type) {
-	case TDA1004X_DEMOD_TDA10045:
-		switch (tda1004x_read_byte(state, TDA10045H_WREF_LSB)) {
-		case 0x14:
-			fe_params->bandwidth_hz = 8000000;
-			break;
-		case 0xdb:
-			fe_params->bandwidth_hz = 7000000;
-			break;
-		case 0x4f:
-			fe_params->bandwidth_hz = 6000000;
-			break;
-		}
-		break;
-	case TDA1004X_DEMOD_TDA10046:
-		switch (tda1004x_read_byte(state, TDA10046H_TIME_WREF1)) {
-		case 0x5c:
-		case 0x54:
-			fe_params->bandwidth_hz = 8000000;
-			break;
-		case 0x6a:
-		case 0x60:
-			fe_params->bandwidth_hz = 7000000;
-			break;
-		case 0x7b:
-		case 0x70:
-			fe_params->bandwidth_hz = 6000000;
-			break;
-		}
-		break;
-	}
-
-	// FEC
-	fe_params->code_rate_HP =
-	    tda1004x_decode_fec(tda1004x_read_byte(state, TDA1004X_OUT_CONF2) & 7);
-	fe_params->code_rate_LP =
-	    tda1004x_decode_fec((tda1004x_read_byte(state, TDA1004X_OUT_CONF2) >> 3) & 7);
-
-	/* modulation */
-	switch (tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 3) {
-	case 0:
-		fe_params->modulation = QPSK;
-		break;
-	case 1:
-		fe_params->modulation = QAM_16;
-		break;
-	case 2:
-		fe_params->modulation = QAM_64;
-		break;
-	}
-
-	// transmission mode
-	fe_params->transmission_mode = TRANSMISSION_MODE_2K;
-	if (tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x10)
-		fe_params->transmission_mode = TRANSMISSION_MODE_8K;
-
-	// guard interval
-	switch ((tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x0c) >> 2) {
-	case 0:
-		fe_params->guard_interval = GUARD_INTERVAL_1_32;
-		break;
-	case 1:
-		fe_params->guard_interval = GUARD_INTERVAL_1_16;
-		break;
-	case 2:
-		fe_params->guard_interval = GUARD_INTERVAL_1_8;
-		break;
-	case 3:
-		fe_params->guard_interval = GUARD_INTERVAL_1_4;
-		break;
-	}
-
-	// hierarchy
-	switch ((tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x60) >> 5) {
-	case 0:
-		fe_params->hierarchy = HIERARCHY_NONE;
-		break;
-	case 1:
-		fe_params->hierarchy = HIERARCHY_1;
-		break;
-	case 2:
-		fe_params->hierarchy = HIERARCHY_2;
-		break;
-	case 3:
-		fe_params->hierarchy = HIERARCHY_4;
-		break;
-	}
-
-	return 0;
-}
-
-static int tda1004x_read_status(struct dvb_frontend* fe, fe_status_t * fe_status)
-{
-	struct tda1004x_state* state = fe->demodulator_priv;
-	int status;
-	int cber;
-	int vber;
-
-	dprintk("%s\n", __func__);
-
-	// read status
-	status = tda1004x_read_byte(state, TDA1004X_STATUS_CD);
-	if (status == -1)
-		return -EIO;
-
-	// decode
-	*fe_status = 0;
-	if (status & 4)
-		*fe_status |= FE_HAS_SIGNAL;
-	if (status & 2)
-		*fe_status |= FE_HAS_CARRIER;
-	if (status & 8)
-		*fe_status |= FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
-
-	// if we don't already have VITERBI (i.e. not LOCKED), see if the viterbi
-	// is getting anything valid
-	if (!(*fe_status & FE_HAS_VITERBI)) {
-		// read the CBER
-		cber = tda1004x_read_byte(state, TDA1004X_CBER_LSB);
-		if (cber == -1)
-			return -EIO;
-		status = tda1004x_read_byte(state, TDA1004X_CBER_MSB);
-		if (status == -1)
-			return -EIO;
-		cber |= (status << 8);
-		// The address 0x20 should be read to cope with a TDA10046 bug
-		tda1004x_read_byte(state, TDA1004X_CBER_RESET);
-
-		if (cber != 65535)
-			*fe_status |= FE_HAS_VITERBI;
-	}
-
-	// if we DO have some valid VITERBI output, but don't already have SYNC
-	// bytes (i.e. not LOCKED), see if the RS decoder is getting anything valid.
-	if ((*fe_status & FE_HAS_VITERBI) && (!(*fe_status & FE_HAS_SYNC))) {
-		// read the VBER
-		vber = tda1004x_read_byte(state, TDA1004X_VBER_LSB);
-		if (vber == -1)
-			return -EIO;
-		status = tda1004x_read_byte(state, TDA1004X_VBER_MID);
-		if (status == -1)
-			return -EIO;
-		vber |= (status << 8);
-		status = tda1004x_read_byte(state, TDA1004X_VBER_MSB);
-		if (status == -1)
-			return -EIO;
-		vber |= (status & 0x0f) << 16;
-		// The CVBER_LUT should be read to cope with TDA10046 hardware bug
-		tda1004x_read_byte(state, TDA1004X_CVBER_LUT);
-
-		// if RS has passed some valid TS packets, then we must be
-		// getting some SYNC bytes
-		if (vber < 16632)
-			*fe_status |= FE_HAS_SYNC;
-	}
-
-	// success
-	dprintk("%s: fe_status=0x%x\n", __func__, *fe_status);
-	return 0;
-}
-
-static int tda1004x_read_signal_strength(struct dvb_frontend* fe, u16 * signal)
-{
-	struct tda1004x_state* state = fe->demodulator_priv;
-	int tmp;
-	int reg = 0;
-
-	dprintk("%s\n", __func__);
-
-	// determine the register to use
-	switch (state->demod_type) {
-	case TDA1004X_DEMOD_TDA10045:
-		reg = TDA10045H_S_AGC;
-		break;
-
-	case TDA1004X_DEMOD_TDA10046:
-		reg = TDA10046H_AGC_IF_LEVEL;
-		break;
-	}
-
-	// read it
-	tmp = tda1004x_read_byte(state, reg);
-	if (tmp < 0)
-		return -EIO;
-
-	*signal = (tmp << 8) | tmp;
-	dprintk("%s: signal=0x%x\n", __func__, *signal);
-	return 0;
-}
-
-static int tda1004x_read_snr(struct dvb_frontend* fe, u16 * snr)
-{
-	struct tda1004x_state* state = fe->demodulator_priv;
-	int tmp;
-
-	dprintk("%s\n", __func__);
-
-	// read it
-	tmp = tda1004x_read_byte(state, TDA1004X_SNR);
-	if (tmp < 0)
-		return -EIO;
-	tmp = 255 - tmp;
-
-	*snr = ((tmp << 8) | tmp);
-	dprintk("%s: snr=0x%x\n", __func__, *snr);
-	return 0;
-}
-
-static int tda1004x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct tda1004x_state* state = fe->demodulator_priv;
-	int tmp;
-	int tmp2;
-	int counter;
-
-	dprintk("%s\n", __func__);
-
-	// read the UCBLOCKS and reset
-	counter = 0;
-	tmp = tda1004x_read_byte(state, TDA1004X_UNCOR);
-	if (tmp < 0)
-		return -EIO;
-	tmp &= 0x7f;
-	while (counter++ < 5) {
-		tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0);
-		tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0);
-		tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0);
-
-		tmp2 = tda1004x_read_byte(state, TDA1004X_UNCOR);
-		if (tmp2 < 0)
-			return -EIO;
-		tmp2 &= 0x7f;
-		if ((tmp2 < tmp) || (tmp2 == 0))
-			break;
-	}
-
-	if (tmp != 0x7f)
-		*ucblocks = tmp;
-	else
-		*ucblocks = 0xffffffff;
-
-	dprintk("%s: ucblocks=0x%x\n", __func__, *ucblocks);
-	return 0;
-}
-
-static int tda1004x_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct tda1004x_state* state = fe->demodulator_priv;
-	int tmp;
-
-	dprintk("%s\n", __func__);
-
-	// read it in
-	tmp = tda1004x_read_byte(state, TDA1004X_CBER_LSB);
-	if (tmp < 0)
-		return -EIO;
-	*ber = tmp << 1;
-	tmp = tda1004x_read_byte(state, TDA1004X_CBER_MSB);
-	if (tmp < 0)
-		return -EIO;
-	*ber |= (tmp << 9);
-	// The address 0x20 should be read to cope with a TDA10046 bug
-	tda1004x_read_byte(state, TDA1004X_CBER_RESET);
-
-	dprintk("%s: ber=0x%x\n", __func__, *ber);
-	return 0;
-}
-
-static int tda1004x_sleep(struct dvb_frontend* fe)
-{
-	struct tda1004x_state* state = fe->demodulator_priv;
-	int gpio_conf;
-
-	switch (state->demod_type) {
-	case TDA1004X_DEMOD_TDA10045:
-		tda1004x_write_mask(state, TDA1004X_CONFADC1, 0x10, 0x10);
-		break;
-
-	case TDA1004X_DEMOD_TDA10046:
-		/* set outputs to tristate */
-		tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0xff);
-		/* invert GPIO 1 and 3 if desired*/
-		gpio_conf = state->config->gpio_config;
-		if (gpio_conf >= TDA10046_GP00_I)
-			tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x0f,
-							(gpio_conf & 0x0f) ^ 0x0a);
-
-		tda1004x_write_mask(state, TDA1004X_CONFADC2, 0xc0, 0xc0);
-		tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 1);
-		break;
-	}
-
-	return 0;
-}
-
-static int tda1004x_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
-{
-	struct tda1004x_state* state = fe->demodulator_priv;
-
-	if (enable) {
-		return tda1004x_enable_tuner_i2c(state);
-	} else {
-		return tda1004x_disable_tuner_i2c(state);
-	}
-}
-
-static int tda1004x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
-{
-	fesettings->min_delay_ms = 800;
-	/* Drift compensation makes no sense for DVB-T */
-	fesettings->step_size = 0;
-	fesettings->max_drift = 0;
-	return 0;
-}
-
-static void tda1004x_release(struct dvb_frontend* fe)
-{
-	struct tda1004x_state *state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops tda10045_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name = "Philips TDA10045H DVB-T",
-		.frequency_min = 51000000,
-		.frequency_max = 858000000,
-		.frequency_stepsize = 166667,
-		.caps =
-		    FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-		    FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-		    FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-		    FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO
-	},
-
-	.release = tda1004x_release,
-
-	.init = tda10045_init,
-	.sleep = tda1004x_sleep,
-	.write = tda1004x_write,
-	.i2c_gate_ctrl = tda1004x_i2c_gate_ctrl,
-
-	.set_frontend = tda1004x_set_fe,
-	.get_frontend = tda1004x_get_fe,
-	.get_tune_settings = tda1004x_get_tune_settings,
-
-	.read_status = tda1004x_read_status,
-	.read_ber = tda1004x_read_ber,
-	.read_signal_strength = tda1004x_read_signal_strength,
-	.read_snr = tda1004x_read_snr,
-	.read_ucblocks = tda1004x_read_ucblocks,
-};
-
-struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
-				     struct i2c_adapter* i2c)
-{
-	struct tda1004x_state *state;
-	int id;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
-	if (!state) {
-		printk(KERN_ERR "Can't allocate memory for tda10045 state\n");
-		return NULL;
-	}
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->demod_type = TDA1004X_DEMOD_TDA10045;
-
-	/* check if the demod is there */
-	id = tda1004x_read_byte(state, TDA1004X_CHIPID);
-	if (id < 0) {
-		printk(KERN_ERR "tda10045: chip is not answering. Giving up.\n");
-		kfree(state);
-		return NULL;
-	}
-
-	if (id != 0x25) {
-		printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id);
-		kfree(state);
-		return NULL;
-	}
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &tda10045_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-}
-
-static struct dvb_frontend_ops tda10046_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name = "Philips TDA10046H DVB-T",
-		.frequency_min = 51000000,
-		.frequency_max = 858000000,
-		.frequency_stepsize = 166667,
-		.caps =
-		    FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-		    FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-		    FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-		    FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO
-	},
-
-	.release = tda1004x_release,
-
-	.init = tda10046_init,
-	.sleep = tda1004x_sleep,
-	.write = tda1004x_write,
-	.i2c_gate_ctrl = tda1004x_i2c_gate_ctrl,
-
-	.set_frontend = tda1004x_set_fe,
-	.get_frontend = tda1004x_get_fe,
-	.get_tune_settings = tda1004x_get_tune_settings,
-
-	.read_status = tda1004x_read_status,
-	.read_ber = tda1004x_read_ber,
-	.read_signal_strength = tda1004x_read_signal_strength,
-	.read_snr = tda1004x_read_snr,
-	.read_ucblocks = tda1004x_read_ucblocks,
-};
-
-struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
-				     struct i2c_adapter* i2c)
-{
-	struct tda1004x_state *state;
-	int id;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
-	if (!state) {
-		printk(KERN_ERR "Can't allocate memory for tda10046 state\n");
-		return NULL;
-	}
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->demod_type = TDA1004X_DEMOD_TDA10046;
-
-	/* check if the demod is there */
-	id = tda1004x_read_byte(state, TDA1004X_CHIPID);
-	if (id < 0) {
-		printk(KERN_ERR "tda10046: chip is not answering. Giving up.\n");
-		kfree(state);
-		return NULL;
-	}
-	if (id != 0x46) {
-		printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id);
-		kfree(state);
-		return NULL;
-	}
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &tda10046_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-}
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("Philips TDA10045H & TDA10046H DVB-T Demodulator");
-MODULE_AUTHOR("Andrew de Quincey & Robert Schlabbach");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(tda10045_attach);
-EXPORT_SYMBOL(tda10046_attach);
diff --git a/drivers/media/dvb/frontends/tda1004x.h b/drivers/media/dvb/frontends/tda1004x.h
deleted file mode 100644
index 4e27ffb..0000000
--- a/drivers/media/dvb/frontends/tda1004x.h
+++ /dev/null
@@ -1,149 +0,0 @@
-  /*
-     Driver for Philips tda1004xh OFDM Frontend
-
-     (c) 2004 Andrew de Quincey
-
-     This program is free software; you can redistribute it and/or modify
-     it under the terms of the GNU General Public License as published by
-     the Free Software Foundation; either version 2 of the License, or
-     (at your option) any later version.
-
-     This program is distributed in the hope that it will be useful,
-     but WITHOUT ANY WARRANTY; without even the implied warranty of
-     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
-     GNU General Public License for more details.
-
-     You should have received a copy of the GNU General Public License
-     along with this program; if not, write to the Free Software
-     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-   */
-
-#ifndef TDA1004X_H
-#define TDA1004X_H
-
-#include <linux/dvb/frontend.h>
-#include <linux/firmware.h>
-
-enum tda10046_xtal {
-	TDA10046_XTAL_4M,
-	TDA10046_XTAL_16M,
-};
-
-enum tda10046_agc {
-	TDA10046_AGC_DEFAULT,		/* original configuration */
-	TDA10046_AGC_IFO_AUTO_NEG,	/* IF AGC only, automatic, negtive */
-	TDA10046_AGC_IFO_AUTO_POS,	/* IF AGC only, automatic, positive */
-	TDA10046_AGC_TDA827X,		/* IF AGC only, special setup for tda827x */
-};
-
-/* Many (hybrid) boards use GPIO 1 and 3
-	GPIO1	analog - dvb switch
-	GPIO3	firmware eeprom address switch
-*/
-enum tda10046_gpio {
-	TDA10046_GPTRI  = 0x00,		/* All GPIOs tristate */
-	TDA10046_GP00   = 0x40,		/* GPIO3=0, GPIO1=0 */
-	TDA10046_GP01   = 0x42,		/* GPIO3=0, GPIO1=1 */
-	TDA10046_GP10   = 0x48,		/* GPIO3=1, GPIO1=0 */
-	TDA10046_GP11   = 0x4a,		/* GPIO3=1, GPIO1=1 */
-	TDA10046_GP00_I = 0x80,		/* GPIO3=0, GPIO1=0, invert in sleep mode*/
-	TDA10046_GP01_I = 0x82,		/* GPIO3=0, GPIO1=1, invert in sleep mode */
-	TDA10046_GP10_I = 0x88,		/* GPIO3=1, GPIO1=0, invert in sleep mode */
-	TDA10046_GP11_I = 0x8a,		/* GPIO3=1, GPIO1=1, invert in sleep mode */
-};
-
-enum tda10046_if {
-	TDA10046_FREQ_3617,		/* original config, 36,166 MHZ */
-	TDA10046_FREQ_3613,		/* 36,13 MHZ */
-	TDA10046_FREQ_045,		/* low IF, 4.0, 4.5, or 5.0 MHZ */
-	TDA10046_FREQ_052,		/* low IF, 5.1667 MHZ for tda9889 */
-};
-
-enum tda10046_tsout {
-	TDA10046_TS_PARALLEL  = 0x00,	/* parallel transport stream, default */
-	TDA10046_TS_SERIAL    = 0x01,	/* serial transport stream */
-};
-
-struct tda1004x_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* does the "inversion" need inverted? */
-	u8 invert;
-
-	/* Does the OCLK signal need inverted? */
-	u8 invert_oclk;
-
-	/* parallel or serial transport stream */
-	enum tda10046_tsout ts_mode;
-
-	/* Xtal frequency, 4 or 16MHz*/
-	enum tda10046_xtal xtal_freq;
-
-	/* IF frequency */
-	enum tda10046_if if_freq;
-
-	/* AGC configuration */
-	enum tda10046_agc agc_config;
-
-	/* setting of GPIO1 and 3 */
-	enum tda10046_gpio gpio_config;
-
-	/* slave address and configuration of the tuner */
-	u8 tuner_address;
-	u8 antenna_switch;
-
-	/* if the board uses another I2c Bridge (tda8290), its address */
-	u8 i2c_gate;
-
-	/* request firmware for device */
-	int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
-};
-
-enum tda1004x_demod {
-	TDA1004X_DEMOD_TDA10045,
-	TDA1004X_DEMOD_TDA10046,
-};
-
-struct tda1004x_state {
-	struct i2c_adapter* i2c;
-	const struct tda1004x_config* config;
-	struct dvb_frontend frontend;
-
-	/* private demod data */
-	enum tda1004x_demod demod_type;
-};
-
-#if defined(CONFIG_DVB_TDA1004X) || (defined(CONFIG_DVB_TDA1004X_MODULE) && defined(MODULE))
-extern struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
-					    struct i2c_adapter* i2c);
-
-extern struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
-					    struct i2c_adapter* i2c);
-#else
-static inline struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
-					    struct i2c_adapter* i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-static inline struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
-					    struct i2c_adapter* i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_TDA1004X
-
-static inline int tda1004x_writereg(struct dvb_frontend *fe, u8 reg, u8 val) {
-	int r = 0;
-	u8 buf[] = {reg, val};
-	if (fe->ops.write)
-		r = fe->ops.write(fe, buf, 2);
-	return r;
-}
-
-#endif // TDA1004X_H
diff --git a/drivers/media/dvb/frontends/tda10071.c b/drivers/media/dvb/frontends/tda10071.c
deleted file mode 100644
index 703c3d0..0000000
--- a/drivers/media/dvb/frontends/tda10071.c
+++ /dev/null
@@ -1,1284 +0,0 @@
-/*
- * NXP TDA10071 + Conexant CX24118A DVB-S/S2 demodulator + tuner driver
- *
- * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include "tda10071_priv.h"
-
-static struct dvb_frontend_ops tda10071_ops;
-
-/* write multiple registers */
-static int tda10071_wr_regs(struct tda10071_priv *priv, u8 reg, u8 *val,
-	int len)
-{
-	int ret;
-	u8 buf[len+1];
-	struct i2c_msg msg[1] = {
-		{
-			.addr = priv->cfg.i2c_address,
-			.flags = 0,
-			.len = sizeof(buf),
-			.buf = buf,
-		}
-	};
-
-	buf[0] = reg;
-	memcpy(&buf[1], val, len);
-
-	ret = i2c_transfer(priv->i2c, msg, 1);
-	if (ret == 1) {
-		ret = 0;
-	} else {
-		dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%02x " \
-				"len=%d\n", KBUILD_MODNAME, ret, reg, len);
-		ret = -EREMOTEIO;
-	}
-	return ret;
-}
-
-/* read multiple registers */
-static int tda10071_rd_regs(struct tda10071_priv *priv, u8 reg, u8 *val,
-	int len)
-{
-	int ret;
-	u8 buf[len];
-	struct i2c_msg msg[2] = {
-		{
-			.addr = priv->cfg.i2c_address,
-			.flags = 0,
-			.len = 1,
-			.buf = &reg,
-		}, {
-			.addr = priv->cfg.i2c_address,
-			.flags = I2C_M_RD,
-			.len = sizeof(buf),
-			.buf = buf,
-		}
-	};
-
-	ret = i2c_transfer(priv->i2c, msg, 2);
-	if (ret == 2) {
-		memcpy(val, buf, len);
-		ret = 0;
-	} else {
-		dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%02x " \
-				"len=%d\n", KBUILD_MODNAME, ret, reg, len);
-		ret = -EREMOTEIO;
-	}
-	return ret;
-}
-
-/* write single register */
-static int tda10071_wr_reg(struct tda10071_priv *priv, u8 reg, u8 val)
-{
-	return tda10071_wr_regs(priv, reg, &val, 1);
-}
-
-/* read single register */
-static int tda10071_rd_reg(struct tda10071_priv *priv, u8 reg, u8 *val)
-{
-	return tda10071_rd_regs(priv, reg, val, 1);
-}
-
-/* write single register with mask */
-int tda10071_wr_reg_mask(struct tda10071_priv *priv, u8 reg, u8 val, u8 mask)
-{
-	int ret;
-	u8 tmp;
-
-	/* no need for read if whole reg is written */
-	if (mask != 0xff) {
-		ret = tda10071_rd_regs(priv, reg, &tmp, 1);
-		if (ret)
-			return ret;
-
-		val &= mask;
-		tmp &= ~mask;
-		val |= tmp;
-	}
-
-	return tda10071_wr_regs(priv, reg, &val, 1);
-}
-
-/* read single register with mask */
-int tda10071_rd_reg_mask(struct tda10071_priv *priv, u8 reg, u8 *val, u8 mask)
-{
-	int ret, i;
-	u8 tmp;
-
-	ret = tda10071_rd_regs(priv, reg, &tmp, 1);
-	if (ret)
-		return ret;
-
-	tmp &= mask;
-
-	/* find position of the first bit */
-	for (i = 0; i < 8; i++) {
-		if ((mask >> i) & 0x01)
-			break;
-	}
-	*val = tmp >> i;
-
-	return 0;
-}
-
-/* execute firmware command */
-static int tda10071_cmd_execute(struct tda10071_priv *priv,
-	struct tda10071_cmd *cmd)
-{
-	int ret, i;
-	u8 tmp;
-
-	if (!priv->warm) {
-		ret = -EFAULT;
-		goto error;
-	}
-
-	/* write cmd and args for firmware */
-	ret = tda10071_wr_regs(priv, 0x00, cmd->args, cmd->len);
-	if (ret)
-		goto error;
-
-	/* start cmd execution */
-	ret = tda10071_wr_reg(priv, 0x1f, 1);
-	if (ret)
-		goto error;
-
-	/* wait cmd execution terminate */
-	for (i = 1000, tmp = 1; i && tmp; i--) {
-		ret = tda10071_rd_reg(priv, 0x1f, &tmp);
-		if (ret)
-			goto error;
-
-		usleep_range(200, 5000);
-	}
-
-	dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i);
-
-	if (i == 0) {
-		ret = -ETIMEDOUT;
-		goto error;
-	}
-
-	return ret;
-error:
-	dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int tda10071_set_tone(struct dvb_frontend *fe,
-	fe_sec_tone_mode_t fe_sec_tone_mode)
-{
-	struct tda10071_priv *priv = fe->demodulator_priv;
-	struct tda10071_cmd cmd;
-	int ret;
-	u8 tone;
-
-	if (!priv->warm) {
-		ret = -EFAULT;
-		goto error;
-	}
-
-	dev_dbg(&priv->i2c->dev, "%s: tone_mode=%d\n", __func__,
-			fe_sec_tone_mode);
-
-	switch (fe_sec_tone_mode) {
-	case SEC_TONE_ON:
-		tone = 1;
-		break;
-	case SEC_TONE_OFF:
-		tone = 0;
-		break;
-	default:
-		dev_dbg(&priv->i2c->dev, "%s: invalid fe_sec_tone_mode\n",
-				__func__);
-		ret = -EINVAL;
-		goto error;
-	}
-
-	cmd.args[0] = CMD_LNB_PCB_CONFIG;
-	cmd.args[1] = 0;
-	cmd.args[2] = 0x00;
-	cmd.args[3] = 0x00;
-	cmd.args[4] = tone;
-	cmd.len = 5;
-	ret = tda10071_cmd_execute(priv, &cmd);
-	if (ret)
-		goto error;
-
-	return ret;
-error:
-	dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int tda10071_set_voltage(struct dvb_frontend *fe,
-	fe_sec_voltage_t fe_sec_voltage)
-{
-	struct tda10071_priv *priv = fe->demodulator_priv;
-	struct tda10071_cmd cmd;
-	int ret;
-	u8 voltage;
-
-	if (!priv->warm) {
-		ret = -EFAULT;
-		goto error;
-	}
-
-	dev_dbg(&priv->i2c->dev, "%s: voltage=%d\n", __func__, fe_sec_voltage);
-
-	switch (fe_sec_voltage) {
-	case SEC_VOLTAGE_13:
-		voltage = 0;
-		break;
-	case SEC_VOLTAGE_18:
-		voltage = 1;
-		break;
-	case SEC_VOLTAGE_OFF:
-		voltage = 0;
-		break;
-	default:
-		dev_dbg(&priv->i2c->dev, "%s: invalid fe_sec_voltage\n",
-				__func__);
-		ret = -EINVAL;
-		goto error;
-	};
-
-	cmd.args[0] = CMD_LNB_SET_DC_LEVEL;
-	cmd.args[1] = 0;
-	cmd.args[2] = voltage;
-	cmd.len = 3;
-	ret = tda10071_cmd_execute(priv, &cmd);
-	if (ret)
-		goto error;
-
-	return ret;
-error:
-	dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int tda10071_diseqc_send_master_cmd(struct dvb_frontend *fe,
-	struct dvb_diseqc_master_cmd *diseqc_cmd)
-{
-	struct tda10071_priv *priv = fe->demodulator_priv;
-	struct tda10071_cmd cmd;
-	int ret, i;
-	u8 tmp;
-
-	if (!priv->warm) {
-		ret = -EFAULT;
-		goto error;
-	}
-
-	dev_dbg(&priv->i2c->dev, "%s: msg_len=%d\n", __func__,
-			diseqc_cmd->msg_len);
-
-	if (diseqc_cmd->msg_len < 3 || diseqc_cmd->msg_len > 6) {
-		ret = -EINVAL;
-		goto error;
-	}
-
-	/* wait LNB TX */
-	for (i = 500, tmp = 0; i && !tmp; i--) {
-		ret = tda10071_rd_reg_mask(priv, 0x47, &tmp, 0x01);
-		if (ret)
-			goto error;
-
-		usleep_range(10000, 20000);
-	}
-
-	dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i);
-
-	if (i == 0) {
-		ret = -ETIMEDOUT;
-		goto error;
-	}
-
-	ret = tda10071_wr_reg_mask(priv, 0x47, 0x00, 0x01);
-	if (ret)
-		goto error;
-
-	cmd.args[0] = CMD_LNB_SEND_DISEQC;
-	cmd.args[1] = 0;
-	cmd.args[2] = 0;
-	cmd.args[3] = 0;
-	cmd.args[4] = 2;
-	cmd.args[5] = 0;
-	cmd.args[6] = diseqc_cmd->msg_len;
-	memcpy(&cmd.args[7], diseqc_cmd->msg, diseqc_cmd->msg_len);
-	cmd.len = 7 + diseqc_cmd->msg_len;
-	ret = tda10071_cmd_execute(priv, &cmd);
-	if (ret)
-		goto error;
-
-	return ret;
-error:
-	dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int tda10071_diseqc_recv_slave_reply(struct dvb_frontend *fe,
-	struct dvb_diseqc_slave_reply *reply)
-{
-	struct tda10071_priv *priv = fe->demodulator_priv;
-	struct tda10071_cmd cmd;
-	int ret, i;
-	u8 tmp;
-
-	if (!priv->warm) {
-		ret = -EFAULT;
-		goto error;
-	}
-
-	dev_dbg(&priv->i2c->dev, "%s:\n", __func__);
-
-	/* wait LNB RX */
-	for (i = 500, tmp = 0; i && !tmp; i--) {
-		ret = tda10071_rd_reg_mask(priv, 0x47, &tmp, 0x02);
-		if (ret)
-			goto error;
-
-		usleep_range(10000, 20000);
-	}
-
-	dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i);
-
-	if (i == 0) {
-		ret = -ETIMEDOUT;
-		goto error;
-	}
-
-	/* reply len */
-	ret = tda10071_rd_reg(priv, 0x46, &tmp);
-	if (ret)
-		goto error;
-
-	reply->msg_len = tmp & 0x1f; /* [4:0] */;
-	if (reply->msg_len > sizeof(reply->msg))
-		reply->msg_len = sizeof(reply->msg); /* truncate API max */
-
-	/* read reply */
-	cmd.args[0] = CMD_LNB_UPDATE_REPLY;
-	cmd.args[1] = 0;
-	cmd.len = 2;
-	ret = tda10071_cmd_execute(priv, &cmd);
-	if (ret)
-		goto error;
-
-	ret = tda10071_rd_regs(priv, cmd.len, reply->msg, reply->msg_len);
-	if (ret)
-		goto error;
-
-	return ret;
-error:
-	dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int tda10071_diseqc_send_burst(struct dvb_frontend *fe,
-	fe_sec_mini_cmd_t fe_sec_mini_cmd)
-{
-	struct tda10071_priv *priv = fe->demodulator_priv;
-	struct tda10071_cmd cmd;
-	int ret, i;
-	u8 tmp, burst;
-
-	if (!priv->warm) {
-		ret = -EFAULT;
-		goto error;
-	}
-
-	dev_dbg(&priv->i2c->dev, "%s: fe_sec_mini_cmd=%d\n", __func__,
-			fe_sec_mini_cmd);
-
-	switch (fe_sec_mini_cmd) {
-	case SEC_MINI_A:
-		burst = 0;
-		break;
-	case SEC_MINI_B:
-		burst = 1;
-		break;
-	default:
-		dev_dbg(&priv->i2c->dev, "%s: invalid fe_sec_mini_cmd\n",
-				__func__);
-		ret = -EINVAL;
-		goto error;
-	}
-
-	/* wait LNB TX */
-	for (i = 500, tmp = 0; i && !tmp; i--) {
-		ret = tda10071_rd_reg_mask(priv, 0x47, &tmp, 0x01);
-		if (ret)
-			goto error;
-
-		usleep_range(10000, 20000);
-	}
-
-	dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i);
-
-	if (i == 0) {
-		ret = -ETIMEDOUT;
-		goto error;
-	}
-
-	ret = tda10071_wr_reg_mask(priv, 0x47, 0x00, 0x01);
-	if (ret)
-		goto error;
-
-	cmd.args[0] = CMD_LNB_SEND_TONEBURST;
-	cmd.args[1] = 0;
-	cmd.args[2] = burst;
-	cmd.len = 3;
-	ret = tda10071_cmd_execute(priv, &cmd);
-	if (ret)
-		goto error;
-
-	return ret;
-error:
-	dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int tda10071_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct tda10071_priv *priv = fe->demodulator_priv;
-	int ret;
-	u8 tmp;
-
-	*status = 0;
-
-	if (!priv->warm) {
-		ret = 0;
-		goto error;
-	}
-
-	ret = tda10071_rd_reg(priv, 0x39, &tmp);
-	if (ret)
-		goto error;
-
-	if (tmp & 0x01) /* tuner PLL */
-		*status |= FE_HAS_SIGNAL;
-	if (tmp & 0x02) /* demod PLL */
-		*status |= FE_HAS_CARRIER;
-	if (tmp & 0x04) /* viterbi or LDPC*/
-		*status |= FE_HAS_VITERBI;
-	if (tmp & 0x08) /* RS or BCH */
-		*status |= FE_HAS_SYNC | FE_HAS_LOCK;
-
-	priv->fe_status = *status;
-
-	return ret;
-error:
-	dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int tda10071_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct tda10071_priv *priv = fe->demodulator_priv;
-	int ret;
-	u8 buf[2];
-
-	if (!priv->warm || !(priv->fe_status & FE_HAS_LOCK)) {
-		*snr = 0;
-		ret = 0;
-		goto error;
-	}
-
-	ret = tda10071_rd_regs(priv, 0x3a, buf, 2);
-	if (ret)
-		goto error;
-
-	/* Es/No dBx10 */
-	*snr = buf[0] << 8 | buf[1];
-
-	return ret;
-error:
-	dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int tda10071_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	struct tda10071_priv *priv = fe->demodulator_priv;
-	struct tda10071_cmd cmd;
-	int ret;
-	u8 tmp;
-
-	if (!priv->warm || !(priv->fe_status & FE_HAS_LOCK)) {
-		*strength = 0;
-		ret = 0;
-		goto error;
-	}
-
-	cmd.args[0] = CMD_GET_AGCACC;
-	cmd.args[1] = 0;
-	cmd.len = 2;
-	ret = tda10071_cmd_execute(priv, &cmd);
-	if (ret)
-		goto error;
-
-	/* input power estimate dBm */
-	ret = tda10071_rd_reg(priv, 0x50, &tmp);
-	if (ret)
-		goto error;
-
-	if (tmp < 181)
-		tmp = 181; /* -75 dBm */
-	else if (tmp > 236)
-		tmp = 236; /* -20 dBm */
-
-	/* scale value to 0x0000-0xffff */
-	*strength = (tmp-181) * 0xffff / (236-181);
-
-	return ret;
-error:
-	dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int tda10071_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct tda10071_priv *priv = fe->demodulator_priv;
-	struct tda10071_cmd cmd;
-	int ret, i, len;
-	u8 tmp, reg, buf[8];
-
-	if (!priv->warm || !(priv->fe_status & FE_HAS_LOCK)) {
-		*ber = priv->ber = 0;
-		ret = 0;
-		goto error;
-	}
-
-	switch (priv->delivery_system) {
-	case SYS_DVBS:
-		reg = 0x4c;
-		len = 8;
-		i = 1;
-		break;
-	case SYS_DVBS2:
-		reg = 0x4d;
-		len = 4;
-		i = 0;
-		break;
-	default:
-		*ber = priv->ber = 0;
-		return 0;
-	}
-
-	ret = tda10071_rd_reg(priv, reg, &tmp);
-	if (ret)
-		goto error;
-
-	if (priv->meas_count[i] == tmp) {
-		dev_dbg(&priv->i2c->dev, "%s: meas not ready=%02x\n", __func__,
-				tmp);
-		*ber = priv->ber;
-		return 0;
-	} else {
-		priv->meas_count[i] = tmp;
-	}
-
-	cmd.args[0] = CMD_BER_UPDATE_COUNTERS;
-	cmd.args[1] = 0;
-	cmd.args[2] = i;
-	cmd.len = 3;
-	ret = tda10071_cmd_execute(priv, &cmd);
-	if (ret)
-		goto error;
-
-	ret = tda10071_rd_regs(priv, cmd.len, buf, len);
-	if (ret)
-		goto error;
-
-	if (priv->delivery_system == SYS_DVBS) {
-		*ber = (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3];
-		priv->ucb += (buf[4] << 8) | buf[5];
-	} else {
-		*ber = (buf[0] << 8) | buf[1];
-	}
-	priv->ber = *ber;
-
-	return ret;
-error:
-	dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int tda10071_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	struct tda10071_priv *priv = fe->demodulator_priv;
-	int ret = 0;
-
-	if (!priv->warm || !(priv->fe_status & FE_HAS_LOCK)) {
-		*ucblocks = 0;
-		goto error;
-	}
-
-	/* UCB is updated when BER is read. Assume BER is read anyway. */
-
-	*ucblocks = priv->ucb;
-
-	return ret;
-error:
-	dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int tda10071_set_frontend(struct dvb_frontend *fe)
-{
-	struct tda10071_priv *priv = fe->demodulator_priv;
-	struct tda10071_cmd cmd;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	int ret, i;
-	u8 mode, rolloff, pilot, inversion, div;
-
-	dev_dbg(&priv->i2c->dev, "%s: delivery_system=%d modulation=%d " \
-		"frequency=%d symbol_rate=%d inversion=%d pilot=%d " \
-		"rolloff=%d\n", __func__, c->delivery_system, c->modulation,
-		c->frequency, c->symbol_rate, c->inversion, c->pilot,
-		c->rolloff);
-
-	priv->delivery_system = SYS_UNDEFINED;
-
-	if (!priv->warm) {
-		ret = -EFAULT;
-		goto error;
-	}
-
-	switch (c->inversion) {
-	case INVERSION_OFF:
-		inversion = 1;
-		break;
-	case INVERSION_ON:
-		inversion = 0;
-		break;
-	case INVERSION_AUTO:
-		/* 2 = auto; try first on then off
-		 * 3 = auto; try first off then on */
-		inversion = 3;
-		break;
-	default:
-		dev_dbg(&priv->i2c->dev, "%s: invalid inversion\n", __func__);
-		ret = -EINVAL;
-		goto error;
-	}
-
-	switch (c->delivery_system) {
-	case SYS_DVBS:
-		rolloff = 0;
-		pilot = 2;
-		break;
-	case SYS_DVBS2:
-		switch (c->rolloff) {
-		case ROLLOFF_20:
-			rolloff = 2;
-			break;
-		case ROLLOFF_25:
-			rolloff = 1;
-			break;
-		case ROLLOFF_35:
-			rolloff = 0;
-			break;
-		case ROLLOFF_AUTO:
-		default:
-			dev_dbg(&priv->i2c->dev, "%s: invalid rolloff\n",
-					__func__);
-			ret = -EINVAL;
-			goto error;
-		}
-
-		switch (c->pilot) {
-		case PILOT_OFF:
-			pilot = 0;
-			break;
-		case PILOT_ON:
-			pilot = 1;
-			break;
-		case PILOT_AUTO:
-			pilot = 2;
-			break;
-		default:
-			dev_dbg(&priv->i2c->dev, "%s: invalid pilot\n",
-					__func__);
-			ret = -EINVAL;
-			goto error;
-		}
-		break;
-	default:
-		dev_dbg(&priv->i2c->dev, "%s: invalid delivery_system\n",
-				__func__);
-		ret = -EINVAL;
-		goto error;
-	}
-
-	for (i = 0, mode = 0xff; i < ARRAY_SIZE(TDA10071_MODCOD); i++) {
-		if (c->delivery_system == TDA10071_MODCOD[i].delivery_system &&
-			c->modulation == TDA10071_MODCOD[i].modulation &&
-			c->fec_inner == TDA10071_MODCOD[i].fec) {
-			mode = TDA10071_MODCOD[i].val;
-			dev_dbg(&priv->i2c->dev, "%s: mode found=%02x\n",
-					__func__, mode);
-			break;
-		}
-	}
-
-	if (mode == 0xff) {
-		dev_dbg(&priv->i2c->dev, "%s: invalid parameter combination\n",
-				__func__);
-		ret = -EINVAL;
-		goto error;
-	}
-
-	if (c->symbol_rate <= 5000000)
-		div = 14;
-	else
-		div = 4;
-
-	ret = tda10071_wr_reg(priv, 0x81, div);
-	if (ret)
-		goto error;
-
-	ret = tda10071_wr_reg(priv, 0xe3, div);
-	if (ret)
-		goto error;
-
-	cmd.args[0] = CMD_CHANGE_CHANNEL;
-	cmd.args[1] = 0;
-	cmd.args[2] = mode;
-	cmd.args[3] = (c->frequency >> 16) & 0xff;
-	cmd.args[4] = (c->frequency >>  8) & 0xff;
-	cmd.args[5] = (c->frequency >>  0) & 0xff;
-	cmd.args[6] = ((c->symbol_rate / 1000) >> 8) & 0xff;
-	cmd.args[7] = ((c->symbol_rate / 1000) >> 0) & 0xff;
-	cmd.args[8] = (tda10071_ops.info.frequency_tolerance >> 8) & 0xff;
-	cmd.args[9] = (tda10071_ops.info.frequency_tolerance >> 0) & 0xff;
-	cmd.args[10] = rolloff;
-	cmd.args[11] = inversion;
-	cmd.args[12] = pilot;
-	cmd.args[13] = 0x00;
-	cmd.args[14] = 0x00;
-	cmd.len = 15;
-	ret = tda10071_cmd_execute(priv, &cmd);
-	if (ret)
-		goto error;
-
-	priv->delivery_system = c->delivery_system;
-
-	return ret;
-error:
-	dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int tda10071_get_frontend(struct dvb_frontend *fe)
-{
-	struct tda10071_priv *priv = fe->demodulator_priv;
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	int ret, i;
-	u8 buf[5], tmp;
-
-	if (!priv->warm || !(priv->fe_status & FE_HAS_LOCK)) {
-		ret = -EFAULT;
-		goto error;
-	}
-
-	ret = tda10071_rd_regs(priv, 0x30, buf, 5);
-	if (ret)
-		goto error;
-
-	tmp = buf[0] & 0x3f;
-	for (i = 0; i < ARRAY_SIZE(TDA10071_MODCOD); i++) {
-		if (tmp == TDA10071_MODCOD[i].val) {
-			c->modulation = TDA10071_MODCOD[i].modulation;
-			c->fec_inner = TDA10071_MODCOD[i].fec;
-			c->delivery_system = TDA10071_MODCOD[i].delivery_system;
-		}
-	}
-
-	switch ((buf[1] >> 0) & 0x01) {
-	case 0:
-		c->inversion = INVERSION_OFF;
-		break;
-	case 1:
-		c->inversion = INVERSION_ON;
-		break;
-	}
-
-	switch ((buf[1] >> 7) & 0x01) {
-	case 0:
-		c->pilot = PILOT_OFF;
-		break;
-	case 1:
-		c->pilot = PILOT_ON;
-		break;
-	}
-
-	c->frequency = (buf[2] << 16) | (buf[3] << 8) | (buf[4] << 0);
-
-	ret = tda10071_rd_regs(priv, 0x52, buf, 3);
-	if (ret)
-		goto error;
-
-	c->symbol_rate = (buf[0] << 16) | (buf[1] << 8) | (buf[2] << 0);
-
-	return ret;
-error:
-	dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int tda10071_init(struct dvb_frontend *fe)
-{
-	struct tda10071_priv *priv = fe->demodulator_priv;
-	struct tda10071_cmd cmd;
-	int ret, i, len, remaining, fw_size;
-	const struct firmware *fw;
-	u8 *fw_file = TDA10071_DEFAULT_FIRMWARE;
-	u8 tmp, buf[4];
-	struct tda10071_reg_val_mask tab[] = {
-		{ 0xcd, 0x00, 0x07 },
-		{ 0x80, 0x00, 0x02 },
-		{ 0xcd, 0x00, 0xc0 },
-		{ 0xce, 0x00, 0x1b },
-		{ 0x9d, 0x00, 0x01 },
-		{ 0x9d, 0x00, 0x02 },
-		{ 0x9e, 0x00, 0x01 },
-		{ 0x87, 0x00, 0x80 },
-		{ 0xce, 0x00, 0x08 },
-		{ 0xce, 0x00, 0x10 },
-	};
-	struct tda10071_reg_val_mask tab2[] = {
-		{ 0xf1, 0x70, 0xff },
-		{ 0x88, priv->cfg.pll_multiplier, 0x3f },
-		{ 0x89, 0x00, 0x10 },
-		{ 0x89, 0x10, 0x10 },
-		{ 0xc0, 0x01, 0x01 },
-		{ 0xc0, 0x00, 0x01 },
-		{ 0xe0, 0xff, 0xff },
-		{ 0xe0, 0x00, 0xff },
-		{ 0x96, 0x1e, 0x7e },
-		{ 0x8b, 0x08, 0x08 },
-		{ 0x8b, 0x00, 0x08 },
-		{ 0x8f, 0x1a, 0x7e },
-		{ 0x8c, 0x68, 0xff },
-		{ 0x8d, 0x08, 0xff },
-		{ 0x8e, 0x4c, 0xff },
-		{ 0x8f, 0x01, 0x01 },
-		{ 0x8b, 0x04, 0x04 },
-		{ 0x8b, 0x00, 0x04 },
-		{ 0x87, 0x05, 0x07 },
-		{ 0x80, 0x00, 0x20 },
-		{ 0xc8, 0x01, 0xff },
-		{ 0xb4, 0x47, 0xff },
-		{ 0xb5, 0x9c, 0xff },
-		{ 0xb6, 0x7d, 0xff },
-		{ 0xba, 0x00, 0x03 },
-		{ 0xb7, 0x47, 0xff },
-		{ 0xb8, 0x9c, 0xff },
-		{ 0xb9, 0x7d, 0xff },
-		{ 0xba, 0x00, 0x0c },
-		{ 0xc8, 0x00, 0xff },
-		{ 0xcd, 0x00, 0x04 },
-		{ 0xcd, 0x00, 0x20 },
-		{ 0xe8, 0x02, 0xff },
-		{ 0xcf, 0x20, 0xff },
-		{ 0x9b, 0xd7, 0xff },
-		{ 0x9a, 0x01, 0x03 },
-		{ 0xa8, 0x05, 0x0f },
-		{ 0xa8, 0x65, 0xf0 },
-		{ 0xa6, 0xa0, 0xf0 },
-		{ 0x9d, 0x50, 0xfc },
-		{ 0x9e, 0x20, 0xe0 },
-		{ 0xa3, 0x1c, 0x7c },
-		{ 0xd5, 0x03, 0x03 },
-	};
-
-	/* firmware status */
-	ret = tda10071_rd_reg(priv, 0x51, &tmp);
-	if (ret)
-		goto error;
-
-	if (!tmp) {
-		/* warm state - wake up device from sleep */
-		priv->warm = 1;
-
-		for (i = 0; i < ARRAY_SIZE(tab); i++) {
-			ret = tda10071_wr_reg_mask(priv, tab[i].reg,
-				tab[i].val, tab[i].mask);
-			if (ret)
-				goto error;
-		}
-
-		cmd.args[0] = CMD_SET_SLEEP_MODE;
-		cmd.args[1] = 0;
-		cmd.args[2] = 0;
-		cmd.len = 3;
-		ret = tda10071_cmd_execute(priv, &cmd);
-		if (ret)
-			goto error;
-	} else {
-		/* cold state - try to download firmware */
-		priv->warm = 0;
-
-		/* request the firmware, this will block and timeout */
-		ret = request_firmware(&fw, fw_file, priv->i2c->dev.parent);
-		if (ret) {
-			dev_err(&priv->i2c->dev, "%s: did not find the " \
-					"firmware file. (%s) Please see " \
-					"linux/Documentation/dvb/ for more " \
-					"details on firmware-problems. (%d)\n",
-					KBUILD_MODNAME, fw_file, ret);
-			goto error;
-		}
-
-		/* init */
-		for (i = 0; i < ARRAY_SIZE(tab2); i++) {
-			ret = tda10071_wr_reg_mask(priv, tab2[i].reg,
-				tab2[i].val, tab2[i].mask);
-			if (ret)
-				goto error_release_firmware;
-		}
-
-		/*  download firmware */
-		ret = tda10071_wr_reg(priv, 0xe0, 0x7f);
-		if (ret)
-			goto error_release_firmware;
-
-		ret = tda10071_wr_reg(priv, 0xf7, 0x81);
-		if (ret)
-			goto error_release_firmware;
-
-		ret = tda10071_wr_reg(priv, 0xf8, 0x00);
-		if (ret)
-			goto error_release_firmware;
-
-		ret = tda10071_wr_reg(priv, 0xf9, 0x00);
-		if (ret)
-			goto error_release_firmware;
-
-		dev_info(&priv->i2c->dev, "%s: found a '%s' in cold state, " \
-				"will try to load a firmware\n", KBUILD_MODNAME,
-				tda10071_ops.info.name);
-		dev_info(&priv->i2c->dev, "%s: downloading firmware from " \
-				"file '%s'\n", KBUILD_MODNAME, fw_file);
-
-		/* do not download last byte */
-		fw_size = fw->size - 1;
-
-		for (remaining = fw_size; remaining > 0;
-			remaining -= (priv->cfg.i2c_wr_max - 1)) {
-			len = remaining;
-			if (len > (priv->cfg.i2c_wr_max - 1))
-				len = (priv->cfg.i2c_wr_max - 1);
-
-			ret = tda10071_wr_regs(priv, 0xfa,
-				(u8 *) &fw->data[fw_size - remaining], len);
-			if (ret) {
-				dev_err(&priv->i2c->dev, "%s: firmware " \
-						"download failed=%d\n",
-						KBUILD_MODNAME, ret);
-				if (ret)
-					goto error_release_firmware;
-			}
-		}
-		release_firmware(fw);
-
-		ret = tda10071_wr_reg(priv, 0xf7, 0x0c);
-		if (ret)
-			goto error;
-
-		ret = tda10071_wr_reg(priv, 0xe0, 0x00);
-		if (ret)
-			goto error;
-
-		/* wait firmware start */
-		msleep(250);
-
-		/* firmware status */
-		ret = tda10071_rd_reg(priv, 0x51, &tmp);
-		if (ret)
-			goto error;
-
-		if (tmp) {
-			dev_info(&priv->i2c->dev, "%s: firmware did not run\n",
-					KBUILD_MODNAME);
-			ret = -EFAULT;
-			goto error;
-		} else {
-			priv->warm = 1;
-		}
-
-		cmd.args[0] = CMD_GET_FW_VERSION;
-		cmd.len = 1;
-		ret = tda10071_cmd_execute(priv, &cmd);
-		if (ret)
-			goto error;
-
-		ret = tda10071_rd_regs(priv, cmd.len, buf, 4);
-		if (ret)
-			goto error;
-
-		dev_info(&priv->i2c->dev, "%s: firmware version %d.%d.%d.%d\n",
-				KBUILD_MODNAME, buf[0], buf[1], buf[2], buf[3]);
-		dev_info(&priv->i2c->dev, "%s: found a '%s' in warm state\n",
-				KBUILD_MODNAME, tda10071_ops.info.name);
-
-		ret = tda10071_rd_regs(priv, 0x81, buf, 2);
-		if (ret)
-			goto error;
-
-		cmd.args[0] = CMD_DEMOD_INIT;
-		cmd.args[1] = ((priv->cfg.xtal / 1000) >> 8) & 0xff;
-		cmd.args[2] = ((priv->cfg.xtal / 1000) >> 0) & 0xff;
-		cmd.args[3] = buf[0];
-		cmd.args[4] = buf[1];
-		cmd.args[5] = priv->cfg.pll_multiplier;
-		cmd.args[6] = priv->cfg.spec_inv;
-		cmd.args[7] = 0x00;
-		cmd.len = 8;
-		ret = tda10071_cmd_execute(priv, &cmd);
-		if (ret)
-			goto error;
-
-		cmd.args[0] = CMD_TUNER_INIT;
-		cmd.args[1] = 0x00;
-		cmd.args[2] = 0x00;
-		cmd.args[3] = 0x00;
-		cmd.args[4] = 0x00;
-		cmd.args[5] = 0x14;
-		cmd.args[6] = 0x00;
-		cmd.args[7] = 0x03;
-		cmd.args[8] = 0x02;
-		cmd.args[9] = 0x02;
-		cmd.args[10] = 0x00;
-		cmd.args[11] = 0x00;
-		cmd.args[12] = 0x00;
-		cmd.args[13] = 0x00;
-		cmd.args[14] = 0x00;
-		cmd.len = 15;
-		ret = tda10071_cmd_execute(priv, &cmd);
-		if (ret)
-			goto error;
-
-		cmd.args[0] = CMD_MPEG_CONFIG;
-		cmd.args[1] = 0;
-		cmd.args[2] = priv->cfg.ts_mode;
-		cmd.args[3] = 0x00;
-		cmd.args[4] = 0x04;
-		cmd.args[5] = 0x00;
-		cmd.len = 6;
-		ret = tda10071_cmd_execute(priv, &cmd);
-		if (ret)
-			goto error;
-
-		ret = tda10071_wr_reg_mask(priv, 0xf0, 0x01, 0x01);
-		if (ret)
-			goto error;
-
-		cmd.args[0] = CMD_LNB_CONFIG;
-		cmd.args[1] = 0;
-		cmd.args[2] = 150;
-		cmd.args[3] = 3;
-		cmd.args[4] = 22;
-		cmd.args[5] = 1;
-		cmd.args[6] = 1;
-		cmd.args[7] = 30;
-		cmd.args[8] = 30;
-		cmd.args[9] = 30;
-		cmd.args[10] = 30;
-		cmd.len = 11;
-		ret = tda10071_cmd_execute(priv, &cmd);
-		if (ret)
-			goto error;
-
-		cmd.args[0] = CMD_BER_CONTROL;
-		cmd.args[1] = 0;
-		cmd.args[2] = 14;
-		cmd.args[3] = 14;
-		cmd.len = 4;
-		ret = tda10071_cmd_execute(priv, &cmd);
-		if (ret)
-			goto error;
-	}
-
-	return ret;
-error_release_firmware:
-	release_firmware(fw);
-error:
-	dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int tda10071_sleep(struct dvb_frontend *fe)
-{
-	struct tda10071_priv *priv = fe->demodulator_priv;
-	struct tda10071_cmd cmd;
-	int ret, i;
-	struct tda10071_reg_val_mask tab[] = {
-		{ 0xcd, 0x07, 0x07 },
-		{ 0x80, 0x02, 0x02 },
-		{ 0xcd, 0xc0, 0xc0 },
-		{ 0xce, 0x1b, 0x1b },
-		{ 0x9d, 0x01, 0x01 },
-		{ 0x9d, 0x02, 0x02 },
-		{ 0x9e, 0x01, 0x01 },
-		{ 0x87, 0x80, 0x80 },
-		{ 0xce, 0x08, 0x08 },
-		{ 0xce, 0x10, 0x10 },
-	};
-
-	if (!priv->warm) {
-		ret = -EFAULT;
-		goto error;
-	}
-
-	cmd.args[0] = CMD_SET_SLEEP_MODE;
-	cmd.args[1] = 0;
-	cmd.args[2] = 1;
-	cmd.len = 3;
-	ret = tda10071_cmd_execute(priv, &cmd);
-	if (ret)
-		goto error;
-
-	for (i = 0; i < ARRAY_SIZE(tab); i++) {
-		ret = tda10071_wr_reg_mask(priv, tab[i].reg, tab[i].val,
-			tab[i].mask);
-		if (ret)
-			goto error;
-	}
-
-	return ret;
-error:
-	dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
-	return ret;
-}
-
-static int tda10071_get_tune_settings(struct dvb_frontend *fe,
-	struct dvb_frontend_tune_settings *s)
-{
-	s->min_delay_ms = 8000;
-	s->step_size = 0;
-	s->max_drift = 0;
-
-	return 0;
-}
-
-static void tda10071_release(struct dvb_frontend *fe)
-{
-	struct tda10071_priv *priv = fe->demodulator_priv;
-	kfree(priv);
-}
-
-struct dvb_frontend *tda10071_attach(const struct tda10071_config *config,
-	struct i2c_adapter *i2c)
-{
-	int ret;
-	struct tda10071_priv *priv = NULL;
-	u8 tmp;
-
-	/* allocate memory for the internal priv */
-	priv = kzalloc(sizeof(struct tda10071_priv), GFP_KERNEL);
-	if (priv == NULL) {
-		ret = -ENOMEM;
-		goto error;
-	}
-
-	/* setup the priv */
-	priv->i2c = i2c;
-	memcpy(&priv->cfg, config, sizeof(struct tda10071_config));
-
-	/* chip ID */
-	ret = tda10071_rd_reg(priv, 0xff, &tmp);
-	if (ret || tmp != 0x0f)
-		goto error;
-
-	/* chip type */
-	ret = tda10071_rd_reg(priv, 0xdd, &tmp);
-	if (ret || tmp != 0x00)
-		goto error;
-
-	/* chip version */
-	ret = tda10071_rd_reg(priv, 0xfe, &tmp);
-	if (ret || tmp != 0x01)
-		goto error;
-
-	/* create dvb_frontend */
-	memcpy(&priv->fe.ops, &tda10071_ops, sizeof(struct dvb_frontend_ops));
-	priv->fe.demodulator_priv = priv;
-
-	return &priv->fe;
-error:
-	dev_dbg(&i2c->dev, "%s: failed=%d\n", __func__, ret);
-	kfree(priv);
-	return NULL;
-}
-EXPORT_SYMBOL(tda10071_attach);
-
-static struct dvb_frontend_ops tda10071_ops = {
-	.delsys = { SYS_DVBS, SYS_DVBS2 },
-	.info = {
-		.name = "NXP TDA10071",
-		.frequency_min = 950000,
-		.frequency_max = 2150000,
-		.frequency_tolerance = 5000,
-		.symbol_rate_min = 1000000,
-		.symbol_rate_max = 45000000,
-		.caps = FE_CAN_INVERSION_AUTO |
-			FE_CAN_FEC_1_2 |
-			FE_CAN_FEC_2_3 |
-			FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_4_5 |
-			FE_CAN_FEC_5_6 |
-			FE_CAN_FEC_6_7 |
-			FE_CAN_FEC_7_8 |
-			FE_CAN_FEC_8_9 |
-			FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK |
-			FE_CAN_RECOVER |
-			FE_CAN_2G_MODULATION
-	},
-
-	.release = tda10071_release,
-
-	.get_tune_settings = tda10071_get_tune_settings,
-
-	.init = tda10071_init,
-	.sleep = tda10071_sleep,
-
-	.set_frontend = tda10071_set_frontend,
-	.get_frontend = tda10071_get_frontend,
-
-	.read_status = tda10071_read_status,
-	.read_snr = tda10071_read_snr,
-	.read_signal_strength = tda10071_read_signal_strength,
-	.read_ber = tda10071_read_ber,
-	.read_ucblocks = tda10071_read_ucblocks,
-
-	.diseqc_send_master_cmd = tda10071_diseqc_send_master_cmd,
-	.diseqc_recv_slave_reply = tda10071_diseqc_recv_slave_reply,
-	.diseqc_send_burst = tda10071_diseqc_send_burst,
-
-	.set_tone = tda10071_set_tone,
-	.set_voltage = tda10071_set_voltage,
-};
-
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_DESCRIPTION("NXP TDA10071 DVB-S/S2 demodulator driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/tda10071.h b/drivers/media/dvb/frontends/tda10071.h
deleted file mode 100644
index 21163c4..0000000
--- a/drivers/media/dvb/frontends/tda10071.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * NXP TDA10071 + Conexant CX24118A DVB-S/S2 demodulator + tuner driver
- *
- * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef TDA10071_H
-#define TDA10071_H
-
-#include <linux/dvb/frontend.h>
-
-struct tda10071_config {
-	/* Demodulator I2C address.
-	 * Default: none, must set
-	 * Values: 0x55,
-	 */
-	u8 i2c_address;
-
-	/* Max bytes I2C provider can write at once.
-	 * Note: Buffer is taken from the stack currently!
-	 * Default: none, must set
-	 * Values:
-	 */
-	u16 i2c_wr_max;
-
-	/* TS output mode.
-	 * Default: TDA10071_TS_SERIAL
-	 * Values:
-	 */
-#define TDA10071_TS_SERIAL        0
-#define TDA10071_TS_PARALLEL      1
-	u8 ts_mode;
-
-	/* Input spectrum inversion.
-	 * Default: 0
-	 * Values: 0, 1
-	 */
-	bool spec_inv;
-
-	/* Xtal frequency Hz
-	 * Default: none, must set
-	 * Values:
-	 */
-	u32 xtal;
-
-	/* PLL multiplier.
-	 * Default: none, must set
-	 * Values:
-	 */
-	u8 pll_multiplier;
-};
-
-
-#if defined(CONFIG_DVB_TDA10071) || \
-	(defined(CONFIG_DVB_TDA10071_MODULE) && defined(MODULE))
-extern struct dvb_frontend *tda10071_attach(
-	const struct tda10071_config *config, struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *tda10071_attach(
-	const struct tda10071_config *config, struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif /* TDA10071_H */
diff --git a/drivers/media/dvb/frontends/tda10071_priv.h b/drivers/media/dvb/frontends/tda10071_priv.h
deleted file mode 100644
index 0fa85cf..0000000
--- a/drivers/media/dvb/frontends/tda10071_priv.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * NXP TDA10071 + Conexant CX24118A DVB-S/S2 demodulator + tuner driver
- *
- * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef TDA10071_PRIV
-#define TDA10071_PRIV
-
-#include "dvb_frontend.h"
-#include "tda10071.h"
-#include <linux/firmware.h>
-
-struct tda10071_priv {
-	struct i2c_adapter *i2c;
-	struct dvb_frontend fe;
-	struct tda10071_config cfg;
-
-	u8 meas_count[2];
-	u32 ber;
-	u32 ucb;
-	fe_status_t fe_status;
-	fe_delivery_system_t delivery_system;
-	bool warm; /* FW running */
-};
-
-static struct tda10071_modcod {
-	fe_delivery_system_t delivery_system;
-	fe_modulation_t modulation;
-	fe_code_rate_t fec;
-	u8 val;
-} TDA10071_MODCOD[] = {
-	/* NBC-QPSK */
-	{ SYS_DVBS2, QPSK,  FEC_AUTO, 0x00 },
-	{ SYS_DVBS2, QPSK,  FEC_1_2,  0x04 },
-	{ SYS_DVBS2, QPSK,  FEC_3_5,  0x05 },
-	{ SYS_DVBS2, QPSK,  FEC_2_3,  0x06 },
-	{ SYS_DVBS2, QPSK,  FEC_3_4,  0x07 },
-	{ SYS_DVBS2, QPSK,  FEC_4_5,  0x08 },
-	{ SYS_DVBS2, QPSK,  FEC_5_6,  0x09 },
-	{ SYS_DVBS2, QPSK,  FEC_8_9,  0x0a },
-	{ SYS_DVBS2, QPSK,  FEC_9_10, 0x0b },
-	/* 8PSK */
-	{ SYS_DVBS2, PSK_8, FEC_3_5,  0x0c },
-	{ SYS_DVBS2, PSK_8, FEC_2_3,  0x0d },
-	{ SYS_DVBS2, PSK_8, FEC_3_4,  0x0e },
-	{ SYS_DVBS2, PSK_8, FEC_5_6,  0x0f },
-	{ SYS_DVBS2, PSK_8, FEC_8_9,  0x10 },
-	{ SYS_DVBS2, PSK_8, FEC_9_10, 0x11 },
-	/* QPSK */
-	{ SYS_DVBS,  QPSK,  FEC_AUTO, 0x2d },
-	{ SYS_DVBS,  QPSK,  FEC_1_2,  0x2e },
-	{ SYS_DVBS,  QPSK,  FEC_2_3,  0x2f },
-	{ SYS_DVBS,  QPSK,  FEC_3_4,  0x30 },
-	{ SYS_DVBS,  QPSK,  FEC_5_6,  0x31 },
-	{ SYS_DVBS,  QPSK,  FEC_7_8,  0x32 },
-};
-
-struct tda10071_reg_val_mask {
-	u8 reg;
-	u8 val;
-	u8 mask;
-};
-
-/* firmware filename */
-#define TDA10071_DEFAULT_FIRMWARE      "dvb-fe-tda10071.fw"
-
-/* firmware commands */
-#define CMD_DEMOD_INIT          0x10
-#define CMD_CHANGE_CHANNEL      0x11
-#define CMD_MPEG_CONFIG         0x13
-#define CMD_TUNER_INIT          0x15
-#define CMD_GET_AGCACC          0x1a
-
-#define CMD_LNB_CONFIG          0x20
-#define CMD_LNB_SEND_DISEQC     0x21
-#define CMD_LNB_SET_DC_LEVEL    0x22
-#define CMD_LNB_PCB_CONFIG      0x23
-#define CMD_LNB_SEND_TONEBURST  0x24
-#define CMD_LNB_UPDATE_REPLY    0x25
-
-#define CMD_GET_FW_VERSION      0x35
-#define CMD_SET_SLEEP_MODE      0x36
-#define CMD_BER_CONTROL         0x3e
-#define CMD_BER_UPDATE_COUNTERS 0x3f
-
-/* firmare command struct */
-#define TDA10071_ARGLEN      30
-struct tda10071_cmd {
-	u8 args[TDA10071_ARGLEN];
-	u8 len;
-};
-
-
-#endif /* TDA10071_PRIV */
diff --git a/drivers/media/dvb/frontends/tda10086.c b/drivers/media/dvb/frontends/tda10086.c
deleted file mode 100644
index fcfe2e0..0000000
--- a/drivers/media/dvb/frontends/tda10086.c
+++ /dev/null
@@ -1,777 +0,0 @@
-  /*
-     Driver for Philips tda10086 DVBS Demodulator
-
-     (c) 2006 Andrew de Quincey
-
-     This program is free software; you can redistribute it and/or modify
-     it under the terms of the GNU General Public License as published by
-     the Free Software Foundation; either version 2 of the License, or
-     (at your option) any later version.
-
-     This program is distributed in the hope that it will be useful,
-     but WITHOUT ANY WARRANTY; without even the implied warranty of
-     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
-     GNU General Public License for more details.
-
-     You should have received a copy of the GNU General Public License
-     along with this program; if not, write to the Free Software
-     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-   */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/jiffies.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "tda10086.h"
-
-#define SACLK 96000000
-
-struct tda10086_state {
-	struct i2c_adapter* i2c;
-	const struct tda10086_config* config;
-	struct dvb_frontend frontend;
-
-	/* private demod data */
-	u32 frequency;
-	u32 symbol_rate;
-	bool has_lock;
-};
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "tda10086: " args); \
-	} while (0)
-
-static int tda10086_write_byte(struct tda10086_state *state, int reg, int data)
-{
-	int ret;
-	u8 b0[] = { reg, data };
-	struct i2c_msg msg = { .flags = 0, .buf = b0, .len = 2 };
-
-	msg.addr = state->config->demod_address;
-	ret = i2c_transfer(state->i2c, &msg, 1);
-
-	if (ret != 1)
-		dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n",
-			__func__, reg, data, ret);
-
-	return (ret != 1) ? ret : 0;
-}
-
-static int tda10086_read_byte(struct tda10086_state *state, int reg)
-{
-	int ret;
-	u8 b0[] = { reg };
-	u8 b1[] = { 0 };
-	struct i2c_msg msg[] = {{ .flags = 0, .buf = b0, .len = 1 },
-				{ .flags = I2C_M_RD, .buf = b1, .len = 1 }};
-
-	msg[0].addr = state->config->demod_address;
-	msg[1].addr = state->config->demod_address;
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2) {
-		dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg,
-			ret);
-		return ret;
-	}
-
-	return b1[0];
-}
-
-static int tda10086_write_mask(struct tda10086_state *state, int reg, int mask, int data)
-{
-	int val;
-
-	/* read a byte and check */
-	val = tda10086_read_byte(state, reg);
-	if (val < 0)
-		return val;
-
-	/* mask if off */
-	val = val & ~mask;
-	val |= data & 0xff;
-
-	/* write it out again */
-	return tda10086_write_byte(state, reg, val);
-}
-
-static int tda10086_init(struct dvb_frontend* fe)
-{
-	struct tda10086_state* state = fe->demodulator_priv;
-	u8 t22k_off = 0x80;
-
-	dprintk ("%s\n", __func__);
-
-	if (state->config->diseqc_tone)
-		t22k_off = 0;
-	/* reset */
-	tda10086_write_byte(state, 0x00, 0x00);
-	msleep(10);
-
-	/* misc setup */
-	tda10086_write_byte(state, 0x01, 0x94);
-	tda10086_write_byte(state, 0x02, 0x35); /* NOTE: TT drivers appear to disable CSWP */
-	tda10086_write_byte(state, 0x03, 0xe4);
-	tda10086_write_byte(state, 0x04, 0x43);
-	tda10086_write_byte(state, 0x0c, 0x0c);
-	tda10086_write_byte(state, 0x1b, 0xb0); /* noise threshold */
-	tda10086_write_byte(state, 0x20, 0x89); /* misc */
-	tda10086_write_byte(state, 0x30, 0x04); /* acquisition period length */
-	tda10086_write_byte(state, 0x32, 0x00); /* irq off */
-	tda10086_write_byte(state, 0x31, 0x56); /* setup AFC */
-
-	/* setup PLL (this assumes SACLK = 96MHz) */
-	tda10086_write_byte(state, 0x55, 0x2c); /* misc PLL setup */
-	if (state->config->xtal_freq == TDA10086_XTAL_16M) {
-		tda10086_write_byte(state, 0x3a, 0x0b); /* M=12 */
-		tda10086_write_byte(state, 0x3b, 0x01); /* P=2 */
-	} else {
-		tda10086_write_byte(state, 0x3a, 0x17); /* M=24 */
-		tda10086_write_byte(state, 0x3b, 0x00); /* P=1 */
-	}
-	tda10086_write_mask(state, 0x55, 0x20, 0x00); /* powerup PLL */
-
-	/* setup TS interface */
-	tda10086_write_byte(state, 0x11, 0x81);
-	tda10086_write_byte(state, 0x12, 0x81);
-	tda10086_write_byte(state, 0x19, 0x40); /* parallel mode A + MSBFIRST */
-	tda10086_write_byte(state, 0x56, 0x80); /* powerdown WPLL - unused in the mode we use */
-	tda10086_write_byte(state, 0x57, 0x08); /* bypass WPLL - unused in the mode we use */
-	tda10086_write_byte(state, 0x10, 0x2a);
-
-	/* setup ADC */
-	tda10086_write_byte(state, 0x58, 0x61); /* ADC setup */
-	tda10086_write_mask(state, 0x58, 0x01, 0x00); /* powerup ADC */
-
-	/* setup AGC */
-	tda10086_write_byte(state, 0x05, 0x0B);
-	tda10086_write_byte(state, 0x37, 0x63);
-	tda10086_write_byte(state, 0x3f, 0x0a); /* NOTE: flydvb varies it */
-	tda10086_write_byte(state, 0x40, 0x64);
-	tda10086_write_byte(state, 0x41, 0x4f);
-	tda10086_write_byte(state, 0x42, 0x43);
-
-	/* setup viterbi */
-	tda10086_write_byte(state, 0x1a, 0x11); /* VBER 10^6, DVB, QPSK */
-
-	/* setup carrier recovery */
-	tda10086_write_byte(state, 0x3d, 0x80);
-
-	/* setup SEC */
-	tda10086_write_byte(state, 0x36, t22k_off); /* all SEC off, 22k tone */
-	tda10086_write_byte(state, 0x34, (((1<<19) * (22000/1000)) / (SACLK/1000)));
-	tda10086_write_byte(state, 0x35, (((1<<19) * (22000/1000)) / (SACLK/1000)) >> 8);
-
-	return 0;
-}
-
-static void tda10086_diseqc_wait(struct tda10086_state *state)
-{
-	unsigned long timeout = jiffies + msecs_to_jiffies(200);
-	while (!(tda10086_read_byte(state, 0x50) & 0x01)) {
-		if(time_after(jiffies, timeout)) {
-			printk("%s: diseqc queue not ready, command may be lost.\n", __func__);
-			break;
-		}
-		msleep(10);
-	}
-}
-
-static int tda10086_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
-{
-	struct tda10086_state* state = fe->demodulator_priv;
-	u8 t22k_off = 0x80;
-
-	dprintk ("%s\n", __func__);
-
-	if (state->config->diseqc_tone)
-		t22k_off = 0;
-
-	switch (tone) {
-	case SEC_TONE_OFF:
-		tda10086_write_byte(state, 0x36, t22k_off);
-		break;
-
-	case SEC_TONE_ON:
-		tda10086_write_byte(state, 0x36, 0x01 + t22k_off);
-		break;
-	}
-
-	return 0;
-}
-
-static int tda10086_send_master_cmd (struct dvb_frontend* fe,
-				    struct dvb_diseqc_master_cmd* cmd)
-{
-	struct tda10086_state* state = fe->demodulator_priv;
-	int i;
-	u8 oldval;
-	u8 t22k_off = 0x80;
-
-	dprintk ("%s\n", __func__);
-
-	if (state->config->diseqc_tone)
-		t22k_off = 0;
-
-	if (cmd->msg_len > 6)
-		return -EINVAL;
-	oldval = tda10086_read_byte(state, 0x36);
-
-	for(i=0; i< cmd->msg_len; i++) {
-		tda10086_write_byte(state, 0x48+i, cmd->msg[i]);
-	}
-	tda10086_write_byte(state, 0x36, (0x08 + t22k_off)
-					| ((cmd->msg_len - 1) << 4));
-
-	tda10086_diseqc_wait(state);
-
-	tda10086_write_byte(state, 0x36, oldval);
-
-	return 0;
-}
-
-static int tda10086_send_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
-{
-	struct tda10086_state* state = fe->demodulator_priv;
-	u8 oldval = tda10086_read_byte(state, 0x36);
-	u8 t22k_off = 0x80;
-
-	dprintk ("%s\n", __func__);
-
-	if (state->config->diseqc_tone)
-		t22k_off = 0;
-
-	switch(minicmd) {
-	case SEC_MINI_A:
-		tda10086_write_byte(state, 0x36, 0x04 + t22k_off);
-		break;
-
-	case SEC_MINI_B:
-		tda10086_write_byte(state, 0x36, 0x06 + t22k_off);
-		break;
-	}
-
-	tda10086_diseqc_wait(state);
-
-	tda10086_write_byte(state, 0x36, oldval);
-
-	return 0;
-}
-
-static int tda10086_set_inversion(struct tda10086_state *state,
-				  struct dtv_frontend_properties *fe_params)
-{
-	u8 invval = 0x80;
-
-	dprintk ("%s %i %i\n", __func__, fe_params->inversion, state->config->invert);
-
-	switch(fe_params->inversion) {
-	case INVERSION_OFF:
-		if (state->config->invert)
-			invval = 0x40;
-		break;
-	case INVERSION_ON:
-		if (!state->config->invert)
-			invval = 0x40;
-		break;
-	case INVERSION_AUTO:
-		invval = 0x00;
-		break;
-	}
-	tda10086_write_mask(state, 0x0c, 0xc0, invval);
-
-	return 0;
-}
-
-static int tda10086_set_symbol_rate(struct tda10086_state *state,
-				    struct dtv_frontend_properties *fe_params)
-{
-	u8 dfn = 0;
-	u8 afs = 0;
-	u8 byp = 0;
-	u8 reg37 = 0x43;
-	u8 reg42 = 0x43;
-	u64 big;
-	u32 tmp;
-	u32 bdr;
-	u32 bdri;
-	u32 symbol_rate = fe_params->symbol_rate;
-
-	dprintk ("%s %i\n", __func__, symbol_rate);
-
-	/* setup the decimation and anti-aliasing filters.. */
-	if (symbol_rate < (u32) (SACLK * 0.0137)) {
-		dfn=4;
-		afs=1;
-	} else if (symbol_rate < (u32) (SACLK * 0.0208)) {
-		dfn=4;
-		afs=0;
-	} else if (symbol_rate < (u32) (SACLK * 0.0270)) {
-		dfn=3;
-		afs=1;
-	} else if (symbol_rate < (u32) (SACLK * 0.0416)) {
-		dfn=3;
-		afs=0;
-	} else if (symbol_rate < (u32) (SACLK * 0.0550)) {
-		dfn=2;
-		afs=1;
-	} else if (symbol_rate < (u32) (SACLK * 0.0833)) {
-		dfn=2;
-		afs=0;
-	} else if (symbol_rate < (u32) (SACLK * 0.1100)) {
-		dfn=1;
-		afs=1;
-	} else if (symbol_rate < (u32) (SACLK * 0.1666)) {
-		dfn=1;
-		afs=0;
-	} else if (symbol_rate < (u32) (SACLK * 0.2200)) {
-		dfn=0;
-		afs=1;
-	} else if (symbol_rate < (u32) (SACLK * 0.3333)) {
-		dfn=0;
-		afs=0;
-	} else {
-		reg37 = 0x63;
-		reg42 = 0x4f;
-		byp=1;
-	}
-
-	/* calculate BDR */
-	big = (1ULL<<21) * ((u64) symbol_rate/1000ULL) * (1ULL<<dfn);
-	big += ((SACLK/1000ULL)-1ULL);
-	do_div(big, (SACLK/1000ULL));
-	bdr = big & 0xfffff;
-
-	/* calculate BDRI */
-	tmp = (1<<dfn)*(symbol_rate/1000);
-	bdri = ((32 * (SACLK/1000)) + (tmp-1)) / tmp;
-
-	tda10086_write_byte(state, 0x21, (afs << 7) | dfn);
-	tda10086_write_mask(state, 0x20, 0x08, byp << 3);
-	tda10086_write_byte(state, 0x06, bdr);
-	tda10086_write_byte(state, 0x07, bdr >> 8);
-	tda10086_write_byte(state, 0x08, bdr >> 16);
-	tda10086_write_byte(state, 0x09, bdri);
-	tda10086_write_byte(state, 0x37, reg37);
-	tda10086_write_byte(state, 0x42, reg42);
-
-	return 0;
-}
-
-static int tda10086_set_fec(struct tda10086_state *state,
-			    struct dtv_frontend_properties *fe_params)
-{
-	u8 fecval;
-
-	dprintk("%s %i\n", __func__, fe_params->fec_inner);
-
-	switch (fe_params->fec_inner) {
-	case FEC_1_2:
-		fecval = 0x00;
-		break;
-	case FEC_2_3:
-		fecval = 0x01;
-		break;
-	case FEC_3_4:
-		fecval = 0x02;
-		break;
-	case FEC_4_5:
-		fecval = 0x03;
-		break;
-	case FEC_5_6:
-		fecval = 0x04;
-		break;
-	case FEC_6_7:
-		fecval = 0x05;
-		break;
-	case FEC_7_8:
-		fecval = 0x06;
-		break;
-	case FEC_8_9:
-		fecval = 0x07;
-		break;
-	case FEC_AUTO:
-		fecval = 0x08;
-		break;
-	default:
-		return -1;
-	}
-	tda10086_write_byte(state, 0x0d, fecval);
-
-	return 0;
-}
-
-static int tda10086_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *fe_params = &fe->dtv_property_cache;
-	struct tda10086_state *state = fe->demodulator_priv;
-	int ret;
-	u32 freq = 0;
-	int freqoff;
-
-	dprintk ("%s\n", __func__);
-
-	/* modify parameters for tuning */
-	tda10086_write_byte(state, 0x02, 0x35);
-	state->has_lock = false;
-
-	/* set params */
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-
-		if (fe->ops.tuner_ops.get_frequency)
-			fe->ops.tuner_ops.get_frequency(fe, &freq);
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	/* calcluate the frequency offset (in *Hz* not kHz) */
-	freqoff = fe_params->frequency - freq;
-	freqoff = ((1<<16) * freqoff) / (SACLK/1000);
-	tda10086_write_byte(state, 0x3d, 0x80 | ((freqoff >> 8) & 0x7f));
-	tda10086_write_byte(state, 0x3e, freqoff);
-
-	if ((ret = tda10086_set_inversion(state, fe_params)) < 0)
-		return ret;
-	if ((ret = tda10086_set_symbol_rate(state, fe_params)) < 0)
-		return ret;
-	if ((ret = tda10086_set_fec(state, fe_params)) < 0)
-		return ret;
-
-	/* soft reset + disable TS output until lock */
-	tda10086_write_mask(state, 0x10, 0x40, 0x40);
-	tda10086_write_mask(state, 0x00, 0x01, 0x00);
-
-	state->symbol_rate = fe_params->symbol_rate;
-	state->frequency = fe_params->frequency;
-	return 0;
-}
-
-static int tda10086_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *fe_params = &fe->dtv_property_cache;
-	struct tda10086_state* state = fe->demodulator_priv;
-	u8 val;
-	int tmp;
-	u64 tmp64;
-
-	dprintk ("%s\n", __func__);
-
-	/* check for invalid symbol rate */
-	if (fe_params->symbol_rate < 500000)
-		return -EINVAL;
-
-	/* calculate the updated frequency (note: we convert from Hz->kHz) */
-	tmp64 = tda10086_read_byte(state, 0x52);
-	tmp64 |= (tda10086_read_byte(state, 0x51) << 8);
-	if (tmp64 & 0x8000)
-		tmp64 |= 0xffffffffffff0000ULL;
-	tmp64 = (tmp64 * (SACLK/1000ULL));
-	do_div(tmp64, (1ULL<<15) * (1ULL<<1));
-	fe_params->frequency = (int) state->frequency + (int) tmp64;
-
-	/* the inversion */
-	val = tda10086_read_byte(state, 0x0c);
-	if (val & 0x80) {
-		switch(val & 0x40) {
-		case 0x00:
-			fe_params->inversion = INVERSION_OFF;
-			if (state->config->invert)
-				fe_params->inversion = INVERSION_ON;
-			break;
-		default:
-			fe_params->inversion = INVERSION_ON;
-			if (state->config->invert)
-				fe_params->inversion = INVERSION_OFF;
-			break;
-		}
-	} else {
-		tda10086_read_byte(state, 0x0f);
-		switch(val & 0x02) {
-		case 0x00:
-			fe_params->inversion = INVERSION_OFF;
-			if (state->config->invert)
-				fe_params->inversion = INVERSION_ON;
-			break;
-		default:
-			fe_params->inversion = INVERSION_ON;
-			if (state->config->invert)
-				fe_params->inversion = INVERSION_OFF;
-			break;
-		}
-	}
-
-	/* calculate the updated symbol rate */
-	tmp = tda10086_read_byte(state, 0x1d);
-	if (tmp & 0x80)
-		tmp |= 0xffffff00;
-	tmp = (tmp * 480 * (1<<1)) / 128;
-	tmp = ((state->symbol_rate/1000) * tmp) / (1000000/1000);
-	fe_params->symbol_rate = state->symbol_rate + tmp;
-
-	/* the FEC */
-	val = (tda10086_read_byte(state, 0x0d) & 0x70) >> 4;
-	switch(val) {
-	case 0x00:
-		fe_params->fec_inner = FEC_1_2;
-		break;
-	case 0x01:
-		fe_params->fec_inner = FEC_2_3;
-		break;
-	case 0x02:
-		fe_params->fec_inner = FEC_3_4;
-		break;
-	case 0x03:
-		fe_params->fec_inner = FEC_4_5;
-		break;
-	case 0x04:
-		fe_params->fec_inner = FEC_5_6;
-		break;
-	case 0x05:
-		fe_params->fec_inner = FEC_6_7;
-		break;
-	case 0x06:
-		fe_params->fec_inner = FEC_7_8;
-		break;
-	case 0x07:
-		fe_params->fec_inner = FEC_8_9;
-		break;
-	}
-
-	return 0;
-}
-
-static int tda10086_read_status(struct dvb_frontend* fe, fe_status_t *fe_status)
-{
-	struct tda10086_state* state = fe->demodulator_priv;
-	u8 val;
-
-	dprintk ("%s\n", __func__);
-
-	val = tda10086_read_byte(state, 0x0e);
-	*fe_status = 0;
-	if (val & 0x01)
-		*fe_status |= FE_HAS_SIGNAL;
-	if (val & 0x02)
-		*fe_status |= FE_HAS_CARRIER;
-	if (val & 0x04)
-		*fe_status |= FE_HAS_VITERBI;
-	if (val & 0x08)
-		*fe_status |= FE_HAS_SYNC;
-	if (val & 0x10) {
-		*fe_status |= FE_HAS_LOCK;
-		if (!state->has_lock) {
-			state->has_lock = true;
-			/* modify parameters for stable reception */
-			tda10086_write_byte(state, 0x02, 0x00);
-		}
-	}
-
-	return 0;
-}
-
-static int tda10086_read_signal_strength(struct dvb_frontend* fe, u16 * signal)
-{
-	struct tda10086_state* state = fe->demodulator_priv;
-	u8 _str;
-
-	dprintk ("%s\n", __func__);
-
-	_str = 0xff - tda10086_read_byte(state, 0x43);
-	*signal = (_str << 8) | _str;
-
-	return 0;
-}
-
-static int tda10086_read_snr(struct dvb_frontend* fe, u16 * snr)
-{
-	struct tda10086_state* state = fe->demodulator_priv;
-	u8 _snr;
-
-	dprintk ("%s\n", __func__);
-
-	_snr = 0xff - tda10086_read_byte(state, 0x1c);
-	*snr = (_snr << 8) | _snr;
-
-	return 0;
-}
-
-static int tda10086_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct tda10086_state* state = fe->demodulator_priv;
-
-	dprintk ("%s\n", __func__);
-
-	/* read it */
-	*ucblocks = tda10086_read_byte(state, 0x18) & 0x7f;
-
-	/* reset counter */
-	tda10086_write_byte(state, 0x18, 0x00);
-	tda10086_write_byte(state, 0x18, 0x80);
-
-	return 0;
-}
-
-static int tda10086_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct tda10086_state* state = fe->demodulator_priv;
-
-	dprintk ("%s\n", __func__);
-
-	/* read it */
-	*ber = 0;
-	*ber |= tda10086_read_byte(state, 0x15);
-	*ber |= tda10086_read_byte(state, 0x16) << 8;
-	*ber |= (tda10086_read_byte(state, 0x17) & 0xf) << 16;
-
-	return 0;
-}
-
-static int tda10086_sleep(struct dvb_frontend* fe)
-{
-	struct tda10086_state* state = fe->demodulator_priv;
-
-	dprintk ("%s\n", __func__);
-
-	tda10086_write_mask(state, 0x00, 0x08, 0x08);
-
-	return 0;
-}
-
-static int tda10086_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
-{
-	struct tda10086_state* state = fe->demodulator_priv;
-
-	dprintk ("%s\n", __func__);
-
-	if (enable) {
-		tda10086_write_mask(state, 0x00, 0x10, 0x10);
-	} else {
-		tda10086_write_mask(state, 0x00, 0x10, 0x00);
-	}
-
-	return 0;
-}
-
-static int tda10086_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-
-	if (p->symbol_rate > 20000000) {
-		fesettings->min_delay_ms = 50;
-		fesettings->step_size = 2000;
-		fesettings->max_drift = 8000;
-	} else if (p->symbol_rate > 12000000) {
-		fesettings->min_delay_ms = 100;
-		fesettings->step_size = 1500;
-		fesettings->max_drift = 9000;
-	} else if (p->symbol_rate > 8000000) {
-		fesettings->min_delay_ms = 100;
-		fesettings->step_size = 1000;
-		fesettings->max_drift = 8000;
-	} else if (p->symbol_rate > 4000000) {
-		fesettings->min_delay_ms = 100;
-		fesettings->step_size = 500;
-		fesettings->max_drift = 7000;
-	} else if (p->symbol_rate > 2000000) {
-		fesettings->min_delay_ms = 200;
-		fesettings->step_size = p->symbol_rate / 8000;
-		fesettings->max_drift = 14 * fesettings->step_size;
-	} else {
-		fesettings->min_delay_ms = 200;
-		fesettings->step_size =  p->symbol_rate / 8000;
-		fesettings->max_drift = 18 * fesettings->step_size;
-	}
-
-	return 0;
-}
-
-static void tda10086_release(struct dvb_frontend* fe)
-{
-	struct tda10086_state *state = fe->demodulator_priv;
-	tda10086_sleep(fe);
-	kfree(state);
-}
-
-static struct dvb_frontend_ops tda10086_ops = {
-	.delsys = { SYS_DVBS },
-	.info = {
-		.name     = "Philips TDA10086 DVB-S",
-		.frequency_min    = 950000,
-		.frequency_max    = 2150000,
-		.frequency_stepsize = 125,     /* kHz for QPSK frontends */
-		.symbol_rate_min  = 1000000,
-		.symbol_rate_max  = 45000000,
-		.caps = FE_CAN_INVERSION_AUTO |
-			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK
-	},
-
-	.release = tda10086_release,
-
-	.init = tda10086_init,
-	.sleep = tda10086_sleep,
-	.i2c_gate_ctrl = tda10086_i2c_gate_ctrl,
-
-	.set_frontend = tda10086_set_frontend,
-	.get_frontend = tda10086_get_frontend,
-	.get_tune_settings = tda10086_get_tune_settings,
-
-	.read_status = tda10086_read_status,
-	.read_ber = tda10086_read_ber,
-	.read_signal_strength = tda10086_read_signal_strength,
-	.read_snr = tda10086_read_snr,
-	.read_ucblocks = tda10086_read_ucblocks,
-
-	.diseqc_send_master_cmd = tda10086_send_master_cmd,
-	.diseqc_send_burst = tda10086_send_burst,
-	.set_tone = tda10086_set_tone,
-};
-
-struct dvb_frontend* tda10086_attach(const struct tda10086_config* config,
-				     struct i2c_adapter* i2c)
-{
-	struct tda10086_state *state;
-
-	dprintk ("%s\n", __func__);
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct tda10086_state), GFP_KERNEL);
-	if (!state)
-		return NULL;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-
-	/* check if the demod is there */
-	if (tda10086_read_byte(state, 0x1e) != 0xe1) {
-		kfree(state);
-		return NULL;
-	}
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &tda10086_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-}
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("Philips TDA10086 DVB-S Demodulator");
-MODULE_AUTHOR("Andrew de Quincey");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(tda10086_attach);
diff --git a/drivers/media/dvb/frontends/tda10086.h b/drivers/media/dvb/frontends/tda10086.h
deleted file mode 100644
index 61148c5..0000000
--- a/drivers/media/dvb/frontends/tda10086.h
+++ /dev/null
@@ -1,61 +0,0 @@
-  /*
-     Driver for Philips tda10086 DVBS Frontend
-
-     (c) 2006 Andrew de Quincey
-
-     This program is free software; you can redistribute it and/or modify
-     it under the terms of the GNU General Public License as published by
-     the Free Software Foundation; either version 2 of the License, or
-     (at your option) any later version.
-
-     This program is distributed in the hope that it will be useful,
-     but WITHOUT ANY WARRANTY; without even the implied warranty of
-     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
-     GNU General Public License for more details.
-
-     You should have received a copy of the GNU General Public License
-     along with this program; if not, write to the Free Software
-     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-   */
-
-#ifndef TDA10086_H
-#define TDA10086_H
-
-#include <linux/dvb/frontend.h>
-#include <linux/firmware.h>
-
-enum tda10086_xtal {
-	TDA10086_XTAL_16M,
-	TDA10086_XTAL_4M
-};
-
-struct tda10086_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* does the "inversion" need inverted? */
-	u8 invert;
-
-	/* do we need the diseqc signal with carrier? */
-	u8 diseqc_tone;
-
-	/* frequency of the reference xtal */
-	enum tda10086_xtal xtal_freq;
-};
-
-#if defined(CONFIG_DVB_TDA10086) || (defined(CONFIG_DVB_TDA10086_MODULE) && defined(MODULE))
-extern struct dvb_frontend* tda10086_attach(const struct tda10086_config* config,
-					    struct i2c_adapter* i2c);
-#else
-static inline struct dvb_frontend* tda10086_attach(const struct tda10086_config* config,
-						   struct i2c_adapter* i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_TDA10086 */
-
-#endif /* TDA10086_H */
diff --git a/drivers/media/dvb/frontends/tda18271c2dd.c b/drivers/media/dvb/frontends/tda18271c2dd.c
deleted file mode 100644
index ad7c72e..0000000
--- a/drivers/media/dvb/frontends/tda18271c2dd.c
+++ /dev/null
@@ -1,1246 +0,0 @@
-/*
- * tda18271c2dd: Driver for the TDA18271C2 tuner
- *
- * Copyright (C) 2010 Digital Devices GmbH
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 only, as published by the Free Software Foundation.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/firmware.h>
-#include <linux/i2c.h>
-#include <asm/div64.h>
-
-#include "dvb_frontend.h"
-
-struct SStandardParam {
-	s32   m_IFFrequency;
-	u32   m_BandWidth;
-	u8    m_EP3_4_0;
-	u8    m_EB22;
-};
-
-struct SMap {
-	u32   m_Frequency;
-	u8    m_Param;
-};
-
-struct SMapI {
-	u32   m_Frequency;
-	s32    m_Param;
-};
-
-struct SMap2 {
-	u32   m_Frequency;
-	u8    m_Param1;
-	u8    m_Param2;
-};
-
-struct SRFBandMap {
-	u32   m_RF_max;
-	u32   m_RF1_Default;
-	u32   m_RF2_Default;
-	u32   m_RF3_Default;
-};
-
-enum ERegister {
-	ID = 0,
-	TM,
-	PL,
-	EP1, EP2, EP3, EP4, EP5,
-	CPD, CD1, CD2, CD3,
-	MPD, MD1, MD2, MD3,
-	EB1, EB2, EB3, EB4, EB5, EB6, EB7, EB8, EB9, EB10,
-	EB11, EB12, EB13, EB14, EB15, EB16, EB17, EB18, EB19, EB20,
-	EB21, EB22, EB23,
-	NUM_REGS
-};
-
-struct tda_state {
-	struct i2c_adapter *i2c;
-	u8 adr;
-
-	u32   m_Frequency;
-	u32   IF;
-
-	u8    m_IFLevelAnalog;
-	u8    m_IFLevelDigital;
-	u8    m_IFLevelDVBC;
-	u8    m_IFLevelDVBT;
-
-	u8    m_EP4;
-	u8    m_EP3_Standby;
-
-	bool  m_bMaster;
-
-	s32   m_SettlingTime;
-
-	u8    m_Regs[NUM_REGS];
-
-	/* Tracking filter settings for band 0..6 */
-	u32   m_RF1[7];
-	s32   m_RF_A1[7];
-	s32   m_RF_B1[7];
-	u32   m_RF2[7];
-	s32   m_RF_A2[7];
-	s32   m_RF_B2[7];
-	u32   m_RF3[7];
-
-	u8    m_TMValue_RFCal;    /* Calibration temperatur */
-
-	bool  m_bFMInput;         /* true to use Pin 8 for FM Radio */
-
-};
-
-static int PowerScan(struct tda_state *state,
-		     u8 RFBand, u32 RF_in,
-		     u32 *pRF_Out, bool *pbcal);
-
-static int i2c_readn(struct i2c_adapter *adapter, u8 adr, u8 *data, int len)
-{
-	struct i2c_msg msgs[1] = {{.addr = adr,  .flags = I2C_M_RD,
-				   .buf  = data, .len   = len} };
-	return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1;
-}
-
-static int i2c_write(struct i2c_adapter *adap, u8 adr, u8 *data, int len)
-{
-	struct i2c_msg msg = {.addr = adr, .flags = 0,
-			      .buf = data, .len = len};
-
-	if (i2c_transfer(adap, &msg, 1) != 1) {
-		printk(KERN_ERR "tda18271c2dd: i2c write error at addr %i\n", adr);
-		return -1;
-	}
-	return 0;
-}
-
-static int WriteRegs(struct tda_state *state,
-		     u8 SubAddr, u8 *Regs, u16 nRegs)
-{
-	u8 data[nRegs+1];
-
-	data[0] = SubAddr;
-	memcpy(data + 1, Regs, nRegs);
-	return i2c_write(state->i2c, state->adr, data, nRegs+1);
-}
-
-static int WriteReg(struct tda_state *state, u8 SubAddr, u8 Reg)
-{
-	u8 msg[2] = {SubAddr, Reg};
-
-	return i2c_write(state->i2c, state->adr, msg, 2);
-}
-
-static int Read(struct tda_state *state, u8 * Regs)
-{
-	return i2c_readn(state->i2c, state->adr, Regs, 16);
-}
-
-static int ReadExtented(struct tda_state *state, u8 * Regs)
-{
-	return i2c_readn(state->i2c, state->adr, Regs, NUM_REGS);
-}
-
-static int UpdateRegs(struct tda_state *state, u8 RegFrom, u8 RegTo)
-{
-	return WriteRegs(state, RegFrom,
-			 &state->m_Regs[RegFrom], RegTo-RegFrom+1);
-}
-static int UpdateReg(struct tda_state *state, u8 Reg)
-{
-	return WriteReg(state, Reg, state->m_Regs[Reg]);
-}
-
-#include "tda18271c2dd_maps.h"
-
-static void reset(struct tda_state *state)
-{
-	u32   ulIFLevelAnalog = 0;
-	u32   ulIFLevelDigital = 2;
-	u32   ulIFLevelDVBC = 7;
-	u32   ulIFLevelDVBT = 6;
-	u32   ulXTOut = 0;
-	u32   ulStandbyMode = 0x06;    /* Send in stdb, but leave osc on */
-	u32   ulSlave = 0;
-	u32   ulFMInput = 0;
-	u32   ulSettlingTime = 100;
-
-	state->m_Frequency         = 0;
-	state->m_SettlingTime = 100;
-	state->m_IFLevelAnalog = (ulIFLevelAnalog & 0x07) << 2;
-	state->m_IFLevelDigital = (ulIFLevelDigital & 0x07) << 2;
-	state->m_IFLevelDVBC = (ulIFLevelDVBC & 0x07) << 2;
-	state->m_IFLevelDVBT = (ulIFLevelDVBT & 0x07) << 2;
-
-	state->m_EP4 = 0x20;
-	if (ulXTOut != 0)
-		state->m_EP4 |= 0x40;
-
-	state->m_EP3_Standby = ((ulStandbyMode & 0x07) << 5) | 0x0F;
-	state->m_bMaster = (ulSlave == 0);
-
-	state->m_SettlingTime = ulSettlingTime;
-
-	state->m_bFMInput = (ulFMInput == 2);
-}
-
-static bool SearchMap1(struct SMap Map[],
-		       u32 Frequency, u8 *pParam)
-{
-	int i = 0;
-
-	while ((Map[i].m_Frequency != 0) && (Frequency > Map[i].m_Frequency))
-		i += 1;
-	if (Map[i].m_Frequency == 0)
-		return false;
-	*pParam = Map[i].m_Param;
-	return true;
-}
-
-static bool SearchMap2(struct SMapI Map[],
-		       u32 Frequency, s32 *pParam)
-{
-	int i = 0;
-
-	while ((Map[i].m_Frequency != 0) &&
-	       (Frequency > Map[i].m_Frequency))
-		i += 1;
-	if (Map[i].m_Frequency == 0)
-		return false;
-	*pParam = Map[i].m_Param;
-	return true;
-}
-
-static bool SearchMap3(struct SMap2 Map[], u32 Frequency,
-		       u8 *pParam1, u8 *pParam2)
-{
-	int i = 0;
-
-	while ((Map[i].m_Frequency != 0) &&
-	       (Frequency > Map[i].m_Frequency))
-		i += 1;
-	if (Map[i].m_Frequency == 0)
-		return false;
-	*pParam1 = Map[i].m_Param1;
-	*pParam2 = Map[i].m_Param2;
-	return true;
-}
-
-static bool SearchMap4(struct SRFBandMap Map[],
-		       u32 Frequency, u8 *pRFBand)
-{
-	int i = 0;
-
-	while (i < 7 && (Frequency > Map[i].m_RF_max))
-		i += 1;
-	if (i == 7)
-		return false;
-	*pRFBand = i;
-	return true;
-}
-
-static int ThermometerRead(struct tda_state *state, u8 *pTM_Value)
-{
-	int status = 0;
-
-	do {
-		u8 Regs[16];
-		state->m_Regs[TM] |= 0x10;
-		status = UpdateReg(state, TM);
-		if (status < 0)
-			break;
-		status = Read(state, Regs);
-		if (status < 0)
-			break;
-		if (((Regs[TM] & 0x0F) == 0 && (Regs[TM] & 0x20) == 0x20) ||
-		    ((Regs[TM] & 0x0F) == 8 && (Regs[TM] & 0x20) == 0x00)) {
-			state->m_Regs[TM] ^= 0x20;
-			status = UpdateReg(state, TM);
-			if (status < 0)
-				break;
-			msleep(10);
-			status = Read(state, Regs);
-			if (status < 0)
-				break;
-		}
-		*pTM_Value = (Regs[TM] & 0x20)
-				? m_Thermometer_Map_2[Regs[TM] & 0x0F]
-				: m_Thermometer_Map_1[Regs[TM] & 0x0F] ;
-		state->m_Regs[TM] &= ~0x10;        /* Thermometer off */
-		status = UpdateReg(state, TM);
-		if (status < 0)
-			break;
-		state->m_Regs[EP4] &= ~0x03;       /* CAL_mode = 0 ????????? */
-		status = UpdateReg(state, EP4);
-		if (status < 0)
-			break;
-	} while (0);
-
-	return status;
-}
-
-static int StandBy(struct tda_state *state)
-{
-	int status = 0;
-	do {
-		state->m_Regs[EB12] &= ~0x20;  /* PD_AGC1_Det = 0 */
-		status = UpdateReg(state, EB12);
-		if (status < 0)
-			break;
-		state->m_Regs[EB18] &= ~0x83;  /* AGC1_loop_off = 0, AGC1_Gain = 6 dB */
-		status = UpdateReg(state, EB18);
-		if (status < 0)
-			break;
-		state->m_Regs[EB21] |= 0x03; /* AGC2_Gain = -6 dB */
-		state->m_Regs[EP3] = state->m_EP3_Standby;
-		status = UpdateReg(state, EP3);
-		if (status < 0)
-			break;
-		state->m_Regs[EB23] &= ~0x06; /* ForceLP_Fc2_En = 0, LP_Fc[2] = 0 */
-		status = UpdateRegs(state, EB21, EB23);
-		if (status < 0)
-			break;
-	} while (0);
-	return status;
-}
-
-static int CalcMainPLL(struct tda_state *state, u32 freq)
-{
-
-	u8  PostDiv;
-	u8  Div;
-	u64 OscFreq;
-	u32 MainDiv;
-
-	if (!SearchMap3(m_Main_PLL_Map, freq, &PostDiv, &Div))
-		return -EINVAL;
-
-	OscFreq = (u64) freq * (u64) Div;
-	OscFreq *= (u64) 16384;
-	do_div(OscFreq, (u64)16000000);
-	MainDiv = OscFreq;
-
-	state->m_Regs[MPD] = PostDiv & 0x77;
-	state->m_Regs[MD1] = ((MainDiv >> 16) & 0x7F);
-	state->m_Regs[MD2] = ((MainDiv >>  8) & 0xFF);
-	state->m_Regs[MD3] = (MainDiv & 0xFF);
-
-	return UpdateRegs(state, MPD, MD3);
-}
-
-static int CalcCalPLL(struct tda_state *state, u32 freq)
-{
-	u8 PostDiv;
-	u8 Div;
-	u64 OscFreq;
-	u32 CalDiv;
-
-	if (!SearchMap3(m_Cal_PLL_Map, freq, &PostDiv, &Div))
-		return -EINVAL;
-
-	OscFreq = (u64)freq * (u64)Div;
-	/* CalDiv = u32( OscFreq * 16384 / 16000000 ); */
-	OscFreq *= (u64)16384;
-	do_div(OscFreq, (u64)16000000);
-	CalDiv = OscFreq;
-
-	state->m_Regs[CPD] = PostDiv;
-	state->m_Regs[CD1] = ((CalDiv >> 16) & 0xFF);
-	state->m_Regs[CD2] = ((CalDiv >>  8) & 0xFF);
-	state->m_Regs[CD3] = (CalDiv & 0xFF);
-
-	return UpdateRegs(state, CPD, CD3);
-}
-
-static int CalibrateRF(struct tda_state *state,
-		       u8 RFBand, u32 freq, s32 *pCprog)
-{
-	int status = 0;
-	u8 Regs[NUM_REGS];
-	do {
-		u8 BP_Filter = 0;
-		u8 GainTaper = 0;
-		u8 RFC_K = 0;
-		u8 RFC_M = 0;
-
-		state->m_Regs[EP4] &= ~0x03; /* CAL_mode = 0 */
-		status = UpdateReg(state, EP4);
-		if (status < 0)
-			break;
-		state->m_Regs[EB18] |= 0x03;  /* AGC1_Gain = 3 */
-		status = UpdateReg(state, EB18);
-		if (status < 0)
-			break;
-
-		/* Switching off LT (as datasheet says) causes calibration on C1 to fail */
-		/* (Readout of Cprog is allways 255) */
-		if (state->m_Regs[ID] != 0x83)    /* C1: ID == 83, C2: ID == 84 */
-			state->m_Regs[EP3] |= 0x40; /* SM_LT = 1 */
-
-		if (!(SearchMap1(m_BP_Filter_Map, freq, &BP_Filter) &&
-			SearchMap1(m_GainTaper_Map, freq, &GainTaper) &&
-			SearchMap3(m_KM_Map, freq, &RFC_K, &RFC_M)))
-			return -EINVAL;
-
-		state->m_Regs[EP1] = (state->m_Regs[EP1] & ~0x07) | BP_Filter;
-		state->m_Regs[EP2] = (RFBand << 5) | GainTaper;
-
-		state->m_Regs[EB13] = (state->m_Regs[EB13] & ~0x7C) | (RFC_K << 4) | (RFC_M << 2);
-
-		status = UpdateRegs(state, EP1, EP3);
-		if (status < 0)
-			break;
-		status = UpdateReg(state, EB13);
-		if (status < 0)
-			break;
-
-		state->m_Regs[EB4] |= 0x20;    /* LO_ForceSrce = 1 */
-		status = UpdateReg(state, EB4);
-		if (status < 0)
-			break;
-
-		state->m_Regs[EB7] |= 0x20;    /* CAL_ForceSrce = 1 */
-		status = UpdateReg(state, EB7);
-		if (status < 0)
-			break;
-
-		state->m_Regs[EB14] = 0; /* RFC_Cprog = 0 */
-		status = UpdateReg(state, EB14);
-		if (status < 0)
-			break;
-
-		state->m_Regs[EB20] &= ~0x20;  /* ForceLock = 0; */
-		status = UpdateReg(state, EB20);
-		if (status < 0)
-			break;
-
-		state->m_Regs[EP4] |= 0x03;  /* CAL_Mode = 3 */
-		status = UpdateRegs(state, EP4, EP5);
-		if (status < 0)
-			break;
-
-		status = CalcCalPLL(state, freq);
-		if (status < 0)
-			break;
-		status = CalcMainPLL(state, freq + 1000000);
-		if (status < 0)
-			break;
-
-		msleep(5);
-		status = UpdateReg(state, EP2);
-		if (status < 0)
-			break;
-		status = UpdateReg(state, EP1);
-		if (status < 0)
-			break;
-		status = UpdateReg(state, EP2);
-		if (status < 0)
-			break;
-		status = UpdateReg(state, EP1);
-		if (status < 0)
-			break;
-
-		state->m_Regs[EB4] &= ~0x20;    /* LO_ForceSrce = 0 */
-		status = UpdateReg(state, EB4);
-		if (status < 0)
-			break;
-
-		state->m_Regs[EB7] &= ~0x20;    /* CAL_ForceSrce = 0 */
-		status = UpdateReg(state, EB7);
-		if (status < 0)
-			break;
-		msleep(10);
-
-		state->m_Regs[EB20] |= 0x20;  /* ForceLock = 1; */
-		status = UpdateReg(state, EB20);
-		if (status < 0)
-			break;
-		msleep(60);
-
-		state->m_Regs[EP4] &= ~0x03;  /* CAL_Mode = 0 */
-		state->m_Regs[EP3] &= ~0x40; /* SM_LT = 0 */
-		state->m_Regs[EB18] &= ~0x03;  /* AGC1_Gain = 0 */
-		status = UpdateReg(state, EB18);
-		if (status < 0)
-			break;
-		status = UpdateRegs(state, EP3, EP4);
-		if (status < 0)
-			break;
-		status = UpdateReg(state, EP1);
-		if (status < 0)
-			break;
-
-		status = ReadExtented(state, Regs);
-		if (status < 0)
-			break;
-
-		*pCprog = Regs[EB14];
-
-	} while (0);
-	return status;
-}
-
-static int RFTrackingFiltersInit(struct tda_state *state,
-				 u8 RFBand)
-{
-	int status = 0;
-
-	u32   RF1 = m_RF_Band_Map[RFBand].m_RF1_Default;
-	u32   RF2 = m_RF_Band_Map[RFBand].m_RF2_Default;
-	u32   RF3 = m_RF_Band_Map[RFBand].m_RF3_Default;
-	bool    bcal = false;
-
-	s32    Cprog_cal1 = 0;
-	s32    Cprog_table1 = 0;
-	s32    Cprog_cal2 = 0;
-	s32    Cprog_table2 = 0;
-	s32    Cprog_cal3 = 0;
-	s32    Cprog_table3 = 0;
-
-	state->m_RF_A1[RFBand] = 0;
-	state->m_RF_B1[RFBand] = 0;
-	state->m_RF_A2[RFBand] = 0;
-	state->m_RF_B2[RFBand] = 0;
-
-	do {
-		status = PowerScan(state, RFBand, RF1, &RF1, &bcal);
-		if (status < 0)
-			break;
-		if (bcal) {
-			status = CalibrateRF(state, RFBand, RF1, &Cprog_cal1);
-			if (status < 0)
-				break;
-		}
-		SearchMap2(m_RF_Cal_Map, RF1, &Cprog_table1);
-		if (!bcal)
-			Cprog_cal1 = Cprog_table1;
-		state->m_RF_B1[RFBand] = Cprog_cal1 - Cprog_table1;
-		/* state->m_RF_A1[RF_Band] = ???? */
-
-		if (RF2 == 0)
-			break;
-
-		status = PowerScan(state, RFBand, RF2, &RF2, &bcal);
-		if (status < 0)
-			break;
-		if (bcal) {
-			status = CalibrateRF(state, RFBand, RF2, &Cprog_cal2);
-			if (status < 0)
-				break;
-		}
-		SearchMap2(m_RF_Cal_Map, RF2, &Cprog_table2);
-		if (!bcal)
-			Cprog_cal2 = Cprog_table2;
-
-		state->m_RF_A1[RFBand] =
-			(Cprog_cal2 - Cprog_table2 - Cprog_cal1 + Cprog_table1) /
-			((s32)(RF2) - (s32)(RF1));
-
-		if (RF3 == 0)
-			break;
-
-		status = PowerScan(state, RFBand, RF3, &RF3, &bcal);
-		if (status < 0)
-			break;
-		if (bcal) {
-			status = CalibrateRF(state, RFBand, RF3, &Cprog_cal3);
-			if (status < 0)
-				break;
-		}
-		SearchMap2(m_RF_Cal_Map, RF3, &Cprog_table3);
-		if (!bcal)
-			Cprog_cal3 = Cprog_table3;
-		state->m_RF_A2[RFBand] = (Cprog_cal3 - Cprog_table3 - Cprog_cal2 + Cprog_table2) / ((s32)(RF3) - (s32)(RF2));
-		state->m_RF_B2[RFBand] = Cprog_cal2 - Cprog_table2;
-
-	} while (0);
-
-	state->m_RF1[RFBand] = RF1;
-	state->m_RF2[RFBand] = RF2;
-	state->m_RF3[RFBand] = RF3;
-
-#if 0
-	printk(KERN_ERR "tda18271c2dd: %s %d RF1 = %d A1 = %d B1 = %d RF2 = %d A2 = %d B2 = %d RF3 = %d\n", __func__,
-	       RFBand, RF1, state->m_RF_A1[RFBand], state->m_RF_B1[RFBand], RF2,
-	       state->m_RF_A2[RFBand], state->m_RF_B2[RFBand], RF3);
-#endif
-
-	return status;
-}
-
-static int PowerScan(struct tda_state *state,
-		     u8 RFBand, u32 RF_in, u32 *pRF_Out, bool *pbcal)
-{
-	int status = 0;
-	do {
-		u8   Gain_Taper = 0;
-		s32  RFC_Cprog = 0;
-		u8   CID_Target = 0;
-		u8   CountLimit = 0;
-		u32  freq_MainPLL;
-		u8   Regs[NUM_REGS];
-		u8   CID_Gain;
-		s32  Count = 0;
-		int  sign  = 1;
-		bool wait = false;
-
-		if (!(SearchMap2(m_RF_Cal_Map, RF_in, &RFC_Cprog) &&
-		      SearchMap1(m_GainTaper_Map, RF_in, &Gain_Taper) &&
-		      SearchMap3(m_CID_Target_Map, RF_in, &CID_Target, &CountLimit))) {
-
-			printk(KERN_ERR "tda18271c2dd: %s Search map failed\n", __func__);
-			return -EINVAL;
-		}
-
-		state->m_Regs[EP2] = (RFBand << 5) | Gain_Taper;
-		state->m_Regs[EB14] = (RFC_Cprog);
-		status = UpdateReg(state, EP2);
-		if (status < 0)
-			break;
-		status = UpdateReg(state, EB14);
-		if (status < 0)
-			break;
-
-		freq_MainPLL = RF_in + 1000000;
-		status = CalcMainPLL(state, freq_MainPLL);
-		if (status < 0)
-			break;
-		msleep(5);
-		state->m_Regs[EP4] = (state->m_Regs[EP4] & ~0x03) | 1;    /* CAL_mode = 1 */
-		status = UpdateReg(state, EP4);
-		if (status < 0)
-			break;
-		status = UpdateReg(state, EP2);  /* Launch power measurement */
-		if (status < 0)
-			break;
-		status = ReadExtented(state, Regs);
-		if (status < 0)
-			break;
-		CID_Gain = Regs[EB10] & 0x3F;
-		state->m_Regs[ID] = Regs[ID];  /* Chip version, (needed for C1 workarround in CalibrateRF) */
-
-		*pRF_Out = RF_in;
-
-		while (CID_Gain < CID_Target) {
-			freq_MainPLL = RF_in + sign * Count + 1000000;
-			status = CalcMainPLL(state, freq_MainPLL);
-			if (status < 0)
-				break;
-			msleep(wait ? 5 : 1);
-			wait = false;
-			status = UpdateReg(state, EP2);  /* Launch power measurement */
-			if (status < 0)
-				break;
-			status = ReadExtented(state, Regs);
-			if (status < 0)
-				break;
-			CID_Gain = Regs[EB10] & 0x3F;
-			Count += 200000;
-
-			if (Count < CountLimit * 100000)
-				continue;
-			if (sign < 0)
-				break;
-
-			sign = -sign;
-			Count = 200000;
-			wait = true;
-		}
-		status = status;
-		if (status < 0)
-			break;
-		if (CID_Gain >= CID_Target) {
-			*pbcal = true;
-			*pRF_Out = freq_MainPLL - 1000000;
-		} else
-			*pbcal = false;
-	} while (0);
-
-	return status;
-}
-
-static int PowerScanInit(struct tda_state *state)
-{
-	int status = 0;
-	do {
-		state->m_Regs[EP3] = (state->m_Regs[EP3] & ~0x1F) | 0x12;
-		state->m_Regs[EP4] = (state->m_Regs[EP4] & ~0x1F); /* If level = 0, Cal mode = 0 */
-		status = UpdateRegs(state, EP3, EP4);
-		if (status < 0)
-			break;
-		state->m_Regs[EB18] = (state->m_Regs[EB18] & ~0x03); /* AGC 1 Gain = 0 */
-		status = UpdateReg(state, EB18);
-		if (status < 0)
-			break;
-		state->m_Regs[EB21] = (state->m_Regs[EB21] & ~0x03); /* AGC 2 Gain = 0 (Datasheet = 3) */
-		state->m_Regs[EB23] = (state->m_Regs[EB23] | 0x06); /* ForceLP_Fc2_En = 1, LPFc[2] = 1 */
-		status = UpdateRegs(state, EB21, EB23);
-		if (status < 0)
-			break;
-	} while (0);
-	return status;
-}
-
-static int CalcRFFilterCurve(struct tda_state *state)
-{
-	int status = 0;
-	do {
-		msleep(200);      /* Temperature stabilisation */
-		status = PowerScanInit(state);
-		if (status < 0)
-			break;
-		status = RFTrackingFiltersInit(state, 0);
-		if (status < 0)
-			break;
-		status = RFTrackingFiltersInit(state, 1);
-		if (status < 0)
-			break;
-		status = RFTrackingFiltersInit(state, 2);
-		if (status < 0)
-			break;
-		status = RFTrackingFiltersInit(state, 3);
-		if (status < 0)
-			break;
-		status = RFTrackingFiltersInit(state, 4);
-		if (status < 0)
-			break;
-		status = RFTrackingFiltersInit(state, 5);
-		if (status < 0)
-			break;
-		status = RFTrackingFiltersInit(state, 6);
-		if (status < 0)
-			break;
-		status = ThermometerRead(state, &state->m_TMValue_RFCal); /* also switches off Cal mode !!! */
-		if (status < 0)
-			break;
-	} while (0);
-
-	return status;
-}
-
-static int FixedContentsI2CUpdate(struct tda_state *state)
-{
-	static u8 InitRegs[] = {
-		0x08, 0x80, 0xC6,
-		0xDF, 0x16, 0x60, 0x80,
-		0x80, 0x00, 0x00, 0x00,
-		0x00, 0x00, 0x00, 0x00,
-		0xFC, 0x01, 0x84, 0x41,
-		0x01, 0x84, 0x40, 0x07,
-		0x00, 0x00, 0x96, 0x3F,
-		0xC1, 0x00, 0x8F, 0x00,
-		0x00, 0x8C, 0x00, 0x20,
-		0xB3, 0x48, 0xB0,
-	};
-	int status = 0;
-	memcpy(&state->m_Regs[TM], InitRegs, EB23 - TM + 1);
-	do {
-		status = UpdateRegs(state, TM, EB23);
-		if (status < 0)
-			break;
-
-		/* AGC1 gain setup */
-		state->m_Regs[EB17] = 0x00;
-		status = UpdateReg(state, EB17);
-		if (status < 0)
-			break;
-		state->m_Regs[EB17] = 0x03;
-		status = UpdateReg(state, EB17);
-		if (status < 0)
-			break;
-		state->m_Regs[EB17] = 0x43;
-		status = UpdateReg(state, EB17);
-		if (status < 0)
-			break;
-		state->m_Regs[EB17] = 0x4C;
-		status = UpdateReg(state, EB17);
-		if (status < 0)
-			break;
-
-		/* IRC Cal Low band */
-		state->m_Regs[EP3] = 0x1F;
-		state->m_Regs[EP4] = 0x66;
-		state->m_Regs[EP5] = 0x81;
-		state->m_Regs[CPD] = 0xCC;
-		state->m_Regs[CD1] = 0x6C;
-		state->m_Regs[CD2] = 0x00;
-		state->m_Regs[CD3] = 0x00;
-		state->m_Regs[MPD] = 0xC5;
-		state->m_Regs[MD1] = 0x77;
-		state->m_Regs[MD2] = 0x08;
-		state->m_Regs[MD3] = 0x00;
-		status = UpdateRegs(state, EP2, MD3); /* diff between sw and datasheet (ep3-md3) */
-		if (status < 0)
-			break;
-
-#if 0
-		state->m_Regs[EB4] = 0x61;          /* missing in sw */
-		status = UpdateReg(state, EB4);
-		if (status < 0)
-			break;
-		msleep(1);
-		state->m_Regs[EB4] = 0x41;
-		status = UpdateReg(state, EB4);
-		if (status < 0)
-			break;
-#endif
-
-		msleep(5);
-		status = UpdateReg(state, EP1);
-		if (status < 0)
-			break;
-		msleep(5);
-
-		state->m_Regs[EP5] = 0x85;
-		state->m_Regs[CPD] = 0xCB;
-		state->m_Regs[CD1] = 0x66;
-		state->m_Regs[CD2] = 0x70;
-		status = UpdateRegs(state, EP3, CD3);
-		if (status < 0)
-			break;
-		msleep(5);
-		status = UpdateReg(state, EP2);
-		if (status < 0)
-			break;
-		msleep(30);
-
-		/* IRC Cal mid band */
-		state->m_Regs[EP5] = 0x82;
-		state->m_Regs[CPD] = 0xA8;
-		state->m_Regs[CD2] = 0x00;
-		state->m_Regs[MPD] = 0xA1; /* Datasheet = 0xA9 */
-		state->m_Regs[MD1] = 0x73;
-		state->m_Regs[MD2] = 0x1A;
-		status = UpdateRegs(state, EP3, MD3);
-		if (status < 0)
-			break;
-
-		msleep(5);
-		status = UpdateReg(state, EP1);
-		if (status < 0)
-			break;
-		msleep(5);
-
-		state->m_Regs[EP5] = 0x86;
-		state->m_Regs[CPD] = 0xA8;
-		state->m_Regs[CD1] = 0x66;
-		state->m_Regs[CD2] = 0xA0;
-		status = UpdateRegs(state, EP3, CD3);
-		if (status < 0)
-			break;
-		msleep(5);
-		status = UpdateReg(state, EP2);
-		if (status < 0)
-			break;
-		msleep(30);
-
-		/* IRC Cal high band */
-		state->m_Regs[EP5] = 0x83;
-		state->m_Regs[CPD] = 0x98;
-		state->m_Regs[CD1] = 0x65;
-		state->m_Regs[CD2] = 0x00;
-		state->m_Regs[MPD] = 0x91;  /* Datasheet = 0x91 */
-		state->m_Regs[MD1] = 0x71;
-		state->m_Regs[MD2] = 0xCD;
-		status = UpdateRegs(state, EP3, MD3);
-		if (status < 0)
-			break;
-		msleep(5);
-		status = UpdateReg(state, EP1);
-		if (status < 0)
-			break;
-		msleep(5);
-		state->m_Regs[EP5] = 0x87;
-		state->m_Regs[CD1] = 0x65;
-		state->m_Regs[CD2] = 0x50;
-		status = UpdateRegs(state, EP3, CD3);
-		if (status < 0)
-			break;
-		msleep(5);
-		status = UpdateReg(state, EP2);
-		if (status < 0)
-			break;
-		msleep(30);
-
-		/* Back to normal */
-		state->m_Regs[EP4] = 0x64;
-		status = UpdateReg(state, EP4);
-		if (status < 0)
-			break;
-		status = UpdateReg(state, EP1);
-		if (status < 0)
-			break;
-
-	} while (0);
-	return status;
-}
-
-static int InitCal(struct tda_state *state)
-{
-	int status = 0;
-
-	do {
-		status = FixedContentsI2CUpdate(state);
-		if (status < 0)
-			break;
-		status = CalcRFFilterCurve(state);
-		if (status < 0)
-			break;
-		status = StandBy(state);
-		if (status < 0)
-			break;
-		/* m_bInitDone = true; */
-	} while (0);
-	return status;
-};
-
-static int RFTrackingFiltersCorrection(struct tda_state *state,
-				       u32 Frequency)
-{
-	int status = 0;
-	s32 Cprog_table;
-	u8 RFBand;
-	u8 dCoverdT;
-
-	if (!SearchMap2(m_RF_Cal_Map, Frequency, &Cprog_table) ||
-	    !SearchMap4(m_RF_Band_Map, Frequency, &RFBand) ||
-	    !SearchMap1(m_RF_Cal_DC_Over_DT_Map, Frequency, &dCoverdT))
-
-		return -EINVAL;
-
-	do {
-		u8 TMValue_Current;
-		u32   RF1 = state->m_RF1[RFBand];
-		u32   RF2 = state->m_RF1[RFBand];
-		u32   RF3 = state->m_RF1[RFBand];
-		s32    RF_A1 = state->m_RF_A1[RFBand];
-		s32    RF_B1 = state->m_RF_B1[RFBand];
-		s32    RF_A2 = state->m_RF_A2[RFBand];
-		s32    RF_B2 = state->m_RF_B2[RFBand];
-		s32 Capprox = 0;
-		int TComp;
-
-		state->m_Regs[EP3] &= ~0xE0;  /* Power up */
-		status = UpdateReg(state, EP3);
-		if (status < 0)
-			break;
-
-		status = ThermometerRead(state, &TMValue_Current);
-		if (status < 0)
-			break;
-
-		if (RF3 == 0 || Frequency < RF2)
-			Capprox = RF_A1 * ((s32)(Frequency) - (s32)(RF1)) + RF_B1 + Cprog_table;
-		else
-			Capprox = RF_A2 * ((s32)(Frequency) - (s32)(RF2)) + RF_B2 + Cprog_table;
-
-		TComp = (int)(dCoverdT) * ((int)(TMValue_Current) - (int)(state->m_TMValue_RFCal))/1000;
-
-		Capprox += TComp;
-
-		if (Capprox < 0)
-			Capprox = 0;
-		else if (Capprox > 255)
-			Capprox = 255;
-
-
-		/* TODO Temperature compensation. There is defenitely a scale factor */
-		/*      missing in the datasheet, so leave it out for now.           */
-		state->m_Regs[EB14] = Capprox;
-
-		status = UpdateReg(state, EB14);
-		if (status < 0)
-			break;
-
-	} while (0);
-	return status;
-}
-
-static int ChannelConfiguration(struct tda_state *state,
-				u32 Frequency, int Standard)
-{
-
-	s32 IntermediateFrequency = m_StandardTable[Standard].m_IFFrequency;
-	int status = 0;
-
-	u8 BP_Filter = 0;
-	u8 RF_Band = 0;
-	u8 GainTaper = 0;
-	u8 IR_Meas = 0;
-
-	state->IF = IntermediateFrequency;
-	/* printk("tda18271c2dd: %s Freq = %d Standard = %d IF = %d\n", __func__, Frequency, Standard, IntermediateFrequency); */
-	/* get values from tables */
-
-	if (!(SearchMap1(m_BP_Filter_Map, Frequency, &BP_Filter) &&
-	       SearchMap1(m_GainTaper_Map, Frequency, &GainTaper) &&
-	       SearchMap1(m_IR_Meas_Map, Frequency, &IR_Meas) &&
-	       SearchMap4(m_RF_Band_Map, Frequency, &RF_Band))) {
-
-		printk(KERN_ERR "tda18271c2dd: %s SearchMap failed\n", __func__);
-		return -EINVAL;
-	}
-
-	do {
-		state->m_Regs[EP3] = (state->m_Regs[EP3] & ~0x1F) | m_StandardTable[Standard].m_EP3_4_0;
-		state->m_Regs[EP3] &= ~0x04;   /* switch RFAGC to high speed mode */
-
-		/* m_EP4 default for XToutOn, CAL_Mode (0) */
-		state->m_Regs[EP4] = state->m_EP4 | ((Standard > HF_AnalogMax) ? state->m_IFLevelDigital : state->m_IFLevelAnalog);
-		/* state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelDigital; */
-		if (Standard <= HF_AnalogMax)
-			state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelAnalog;
-		else if (Standard <= HF_ATSC)
-			state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelDVBT;
-		else if (Standard <= HF_DVBC)
-			state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelDVBC;
-		else
-			state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelDigital;
-
-		if ((Standard == HF_FM_Radio) && state->m_bFMInput)
-			state->m_Regs[EP4] |= 80;
-
-		state->m_Regs[MPD] &= ~0x80;
-		if (Standard > HF_AnalogMax)
-			state->m_Regs[MPD] |= 0x80; /* Add IF_notch for digital */
-
-		state->m_Regs[EB22] = m_StandardTable[Standard].m_EB22;
-
-		/* Note: This is missing from flowchart in TDA18271 specification ( 1.5 MHz cutoff for FM ) */
-		if (Standard == HF_FM_Radio)
-			state->m_Regs[EB23] |=  0x06; /* ForceLP_Fc2_En = 1, LPFc[2] = 1 */
-		else
-			state->m_Regs[EB23] &= ~0x06; /* ForceLP_Fc2_En = 0, LPFc[2] = 0 */
-
-		status = UpdateRegs(state, EB22, EB23);
-		if (status < 0)
-			break;
-
-		state->m_Regs[EP1] = (state->m_Regs[EP1] & ~0x07) | 0x40 | BP_Filter;   /* Dis_Power_level = 1, Filter */
-		state->m_Regs[EP5] = (state->m_Regs[EP5] & ~0x07) | IR_Meas;
-		state->m_Regs[EP2] = (RF_Band << 5) | GainTaper;
-
-		state->m_Regs[EB1] = (state->m_Regs[EB1] & ~0x07) |
-			(state->m_bMaster ? 0x04 : 0x00); /* CALVCO_FortLOn = MS */
-		/* AGC1_always_master = 0 */
-		/* AGC_firstn = 0 */
-		status = UpdateReg(state, EB1);
-		if (status < 0)
-			break;
-
-		if (state->m_bMaster) {
-			status = CalcMainPLL(state, Frequency + IntermediateFrequency);
-			if (status < 0)
-				break;
-			status = UpdateRegs(state, TM, EP5);
-			if (status < 0)
-				break;
-			state->m_Regs[EB4] |= 0x20;    /* LO_forceSrce = 1 */
-			status = UpdateReg(state, EB4);
-			if (status < 0)
-				break;
-			msleep(1);
-			state->m_Regs[EB4] &= ~0x20;   /* LO_forceSrce = 0 */
-			status = UpdateReg(state, EB4);
-			if (status < 0)
-				break;
-		} else {
-			u8 PostDiv = 0;
-			u8 Div;
-			status = CalcCalPLL(state, Frequency + IntermediateFrequency);
-			if (status < 0)
-				break;
-
-			SearchMap3(m_Cal_PLL_Map, Frequency + IntermediateFrequency, &PostDiv, &Div);
-			state->m_Regs[MPD] = (state->m_Regs[MPD] & ~0x7F) | (PostDiv & 0x77);
-			status = UpdateReg(state, MPD);
-			if (status < 0)
-				break;
-			status = UpdateRegs(state, TM, EP5);
-			if (status < 0)
-				break;
-
-			state->m_Regs[EB7] |= 0x20;    /* CAL_forceSrce = 1 */
-			status = UpdateReg(state, EB7);
-			if (status < 0)
-				break;
-			msleep(1);
-			state->m_Regs[EB7] &= ~0x20;   /* CAL_forceSrce = 0 */
-			status = UpdateReg(state, EB7);
-			if (status < 0)
-				break;
-		}
-		msleep(20);
-		if (Standard != HF_FM_Radio)
-			state->m_Regs[EP3] |= 0x04;    /* RFAGC to normal mode */
-		status = UpdateReg(state, EP3);
-		if (status < 0)
-			break;
-
-	} while (0);
-	return status;
-}
-
-static int sleep(struct dvb_frontend *fe)
-{
-	struct tda_state *state = fe->tuner_priv;
-
-	StandBy(state);
-	return 0;
-}
-
-static int init(struct dvb_frontend *fe)
-{
-	return 0;
-}
-
-static int release(struct dvb_frontend *fe)
-{
-	kfree(fe->tuner_priv);
-	fe->tuner_priv = NULL;
-	return 0;
-}
-
-
-static int set_params(struct dvb_frontend *fe)
-{
-	struct tda_state *state = fe->tuner_priv;
-	int status = 0;
-	int Standard;
-	u32 bw = fe->dtv_property_cache.bandwidth_hz;
-	u32 delsys  = fe->dtv_property_cache.delivery_system;
-
-	state->m_Frequency = fe->dtv_property_cache.frequency;
-
-	switch (delsys) {
-	case  SYS_DVBT:
-	case  SYS_DVBT2:
-		switch (bw) {
-		case 6000000:
-			Standard = HF_DVBT_6MHZ;
-			break;
-		case 7000000:
-			Standard = HF_DVBT_7MHZ;
-			break;
-		case 8000000:
-			Standard = HF_DVBT_8MHZ;
-			break;
-		default:
-			return -EINVAL;
-		}
-	case SYS_DVBC_ANNEX_A:
-	case SYS_DVBC_ANNEX_C:
-		if (bw <= 6000000)
-			Standard = HF_DVBC_6MHZ;
-		else if (bw <= 7000000)
-			Standard = HF_DVBC_7MHZ;
-		else
-			Standard = HF_DVBC_8MHZ;
-		break;
-	default:
-		return -EINVAL;
-	}
-	do {
-		status = RFTrackingFiltersCorrection(state, state->m_Frequency);
-		if (status < 0)
-			break;
-		status = ChannelConfiguration(state, state->m_Frequency,
-					      Standard);
-		if (status < 0)
-			break;
-
-		msleep(state->m_SettlingTime);  /* Allow AGC's to settle down */
-	} while (0);
-	return status;
-}
-
-#if 0
-static int GetSignalStrength(s32 *pSignalStrength, u32 RFAgc, u32 IFAgc)
-{
-	if (IFAgc < 500) {
-		/* Scale this from 0 to 50000 */
-		*pSignalStrength = IFAgc * 100;
-	} else {
-		/* Scale range 500-1500 to 50000-80000 */
-		*pSignalStrength = 50000 + (IFAgc - 500) * 30;
-	}
-
-	return 0;
-}
-#endif
-
-static int get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
-	struct tda_state *state = fe->tuner_priv;
-
-	*frequency = state->IF;
-	return 0;
-}
-
-static int get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
-{
-	/* struct tda_state *state = fe->tuner_priv; */
-	/* *bandwidth = priv->bandwidth; */
-	return 0;
-}
-
-
-static struct dvb_tuner_ops tuner_ops = {
-	.info = {
-		.name = "NXP TDA18271C2D",
-		.frequency_min  =  47125000,
-		.frequency_max  = 865000000,
-		.frequency_step =     62500
-	},
-	.init              = init,
-	.sleep             = sleep,
-	.set_params        = set_params,
-	.release           = release,
-	.get_if_frequency  = get_if_frequency,
-	.get_bandwidth     = get_bandwidth,
-};
-
-struct dvb_frontend *tda18271c2dd_attach(struct dvb_frontend *fe,
-					 struct i2c_adapter *i2c, u8 adr)
-{
-	struct tda_state *state;
-
-	state = kzalloc(sizeof(struct tda_state), GFP_KERNEL);
-	if (!state)
-		return NULL;
-
-	fe->tuner_priv = state;
-	state->adr = adr;
-	state->i2c = i2c;
-	memcpy(&fe->ops.tuner_ops, &tuner_ops, sizeof(struct dvb_tuner_ops));
-	reset(state);
-	InitCal(state);
-
-	return fe;
-}
-EXPORT_SYMBOL_GPL(tda18271c2dd_attach);
-
-MODULE_DESCRIPTION("TDA18271C2 driver");
-MODULE_AUTHOR("DD");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/tda18271c2dd.h b/drivers/media/dvb/frontends/tda18271c2dd.h
deleted file mode 100644
index 1389c74..0000000
--- a/drivers/media/dvb/frontends/tda18271c2dd.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _TDA18271C2DD_H_
-#define _TDA18271C2DD_H_
-#if defined(CONFIG_DVB_TDA18271C2DD) || (defined(CONFIG_DVB_TDA18271C2DD_MODULE) \
-        && defined(MODULE))
-struct dvb_frontend *tda18271c2dd_attach(struct dvb_frontend *fe,
-					 struct i2c_adapter *i2c, u8 adr);
-#else
-static inline struct dvb_frontend *tda18271c2dd_attach(struct dvb_frontend *fe,
-					 struct i2c_adapter *i2c, u8 adr)
-{
-        printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-        return NULL;
-}
-#endif
-
-#endif
diff --git a/drivers/media/dvb/frontends/tda18271c2dd_maps.h b/drivers/media/dvb/frontends/tda18271c2dd_maps.h
deleted file mode 100644
index b87661b..0000000
--- a/drivers/media/dvb/frontends/tda18271c2dd_maps.h
+++ /dev/null
@@ -1,814 +0,0 @@
-enum HF_S {
-	HF_None = 0, HF_B, HF_DK, HF_G, HF_I, HF_L, HF_L1, HF_MN, HF_FM_Radio,
-	HF_AnalogMax, HF_DVBT_6MHZ, HF_DVBT_7MHZ, HF_DVBT_8MHZ,
-	HF_DVBT, HF_ATSC,  HF_DVBC_6MHZ,  HF_DVBC_7MHZ,
-	HF_DVBC_8MHZ, HF_DVBC
-};
-
-struct SStandardParam m_StandardTable[] = {
-	{       0,        0, 0x00, 0x00 },    /* HF_None */
-	{ 6000000,  7000000, 0x1D, 0x2C },    /* HF_B, */
-	{ 6900000,  8000000, 0x1E, 0x2C },    /* HF_DK, */
-	{ 7100000,  8000000, 0x1E, 0x2C },    /* HF_G, */
-	{ 7250000,  8000000, 0x1E, 0x2C },    /* HF_I, */
-	{ 6900000,  8000000, 0x1E, 0x2C },    /* HF_L, */
-	{ 1250000,  8000000, 0x1E, 0x2C },    /* HF_L1, */
-	{ 5400000,  6000000, 0x1C, 0x2C },    /* HF_MN, */
-	{ 1250000,   500000, 0x18, 0x2C },    /* HF_FM_Radio, */
-	{       0,        0, 0x00, 0x00 },    /* HF_AnalogMax (Unused) */
-	{ 3300000,  6000000, 0x1C, 0x58 },    /* HF_DVBT_6MHZ */
-	{ 3500000,  7000000, 0x1C, 0x37 },    /* HF_DVBT_7MHZ */
-	{ 4000000,  8000000, 0x1D, 0x37 },    /* HF_DVBT_8MHZ */
-	{       0,        0, 0x00, 0x00 },    /* HF_DVBT (Unused) */
-	{ 5000000,  6000000, 0x1C, 0x37 },    /* HF_ATSC  (center = 3.25 MHz) */
-	{ 4000000,  6000000, 0x1D, 0x58 },    /* HF_DVBC_6MHZ (Chicago) */
-	{ 4500000,  7000000, 0x1E, 0x37 },    /* HF_DVBC_7MHZ (not documented by NXP) */
-	{ 5000000,  8000000, 0x1F, 0x37 },    /* HF_DVBC_8MHZ */
-	{       0,        0, 0x00, 0x00 },    /* HF_DVBC (Unused) */
-};
-
-struct SMap  m_BP_Filter_Map[] = {
-	{   62000000,  0x00 },
-	{   84000000,  0x01 },
-	{  100000000,  0x02 },
-	{  140000000,  0x03 },
-	{  170000000,  0x04 },
-	{  180000000,  0x05 },
-	{  865000000,  0x06 },
-	{          0,  0x00 },    /* Table End */
-};
-
-static struct SMapI m_RF_Cal_Map[] = {
-	{   41000000,  0x0F },
-	{   43000000,  0x1C },
-	{   45000000,  0x2F },
-	{   46000000,  0x39 },
-	{   47000000,  0x40 },
-	{   47900000,  0x50 },
-	{   49100000,  0x16 },
-	{   50000000,  0x18 },
-	{   51000000,  0x20 },
-	{   53000000,  0x28 },
-	{   55000000,  0x2B },
-	{   56000000,  0x32 },
-	{   57000000,  0x35 },
-	{   58000000,  0x3E },
-	{   59000000,  0x43 },
-	{   60000000,  0x4E },
-	{   61100000,  0x55 },
-	{   63000000,  0x0F },
-	{   64000000,  0x11 },
-	{   65000000,  0x12 },
-	{   66000000,  0x15 },
-	{   67000000,  0x16 },
-	{   68000000,  0x17 },
-	{   70000000,  0x19 },
-	{   71000000,  0x1C },
-	{   72000000,  0x1D },
-	{   73000000,  0x1F },
-	{   74000000,  0x20 },
-	{   75000000,  0x21 },
-	{   76000000,  0x24 },
-	{   77000000,  0x25 },
-	{   78000000,  0x27 },
-	{   80000000,  0x28 },
-	{   81000000,  0x29 },
-	{   82000000,  0x2D },
-	{   83000000,  0x2E },
-	{   84000000,  0x2F },
-	{   85000000,  0x31 },
-	{   86000000,  0x33 },
-	{   87000000,  0x34 },
-	{   88000000,  0x35 },
-	{   89000000,  0x37 },
-	{   90000000,  0x38 },
-	{   91000000,  0x39 },
-	{   93000000,  0x3C },
-	{   94000000,  0x3E },
-	{   95000000,  0x3F },
-	{   96000000,  0x40 },
-	{   97000000,  0x42 },
-	{   99000000,  0x45 },
-	{  100000000,  0x46 },
-	{  102000000,  0x48 },
-	{  103000000,  0x4A },
-	{  105000000,  0x4D },
-	{  106000000,  0x4E },
-	{  107000000,  0x50 },
-	{  108000000,  0x51 },
-	{  110000000,  0x54 },
-	{  111000000,  0x56 },
-	{  112000000,  0x57 },
-	{  113000000,  0x58 },
-	{  114000000,  0x59 },
-	{  115000000,  0x5C },
-	{  116000000,  0x5D },
-	{  117000000,  0x5F },
-	{  119000000,  0x60 },
-	{  120000000,  0x64 },
-	{  121000000,  0x65 },
-	{  122000000,  0x66 },
-	{  123000000,  0x68 },
-	{  124000000,  0x69 },
-	{  125000000,  0x6C },
-	{  126000000,  0x6D },
-	{  127000000,  0x6E },
-	{  128000000,  0x70 },
-	{  129000000,  0x71 },
-	{  130000000,  0x75 },
-	{  131000000,  0x77 },
-	{  132000000,  0x78 },
-	{  133000000,  0x7B },
-	{  134000000,  0x7E },
-	{  135000000,  0x81 },
-	{  136000000,  0x82 },
-	{  137000000,  0x87 },
-	{  138000000,  0x88 },
-	{  139000000,  0x8D },
-	{  140000000,  0x8E },
-	{  141000000,  0x91 },
-	{  142000000,  0x95 },
-	{  143000000,  0x9A },
-	{  144000000,  0x9D },
-	{  145000000,  0xA1 },
-	{  146000000,  0xA2 },
-	{  147000000,  0xA4 },
-	{  148000000,  0xA9 },
-	{  149000000,  0xAE },
-	{  150000000,  0xB0 },
-	{  151000000,  0xB1 },
-	{  152000000,  0xB7 },
-	{  152600000,  0xBD },
-	{  154000000,  0x20 },
-	{  155000000,  0x22 },
-	{  156000000,  0x24 },
-	{  157000000,  0x25 },
-	{  158000000,  0x27 },
-	{  159000000,  0x29 },
-	{  160000000,  0x2C },
-	{  161000000,  0x2D },
-	{  163000000,  0x2E },
-	{  164000000,  0x2F },
-	{  164700000,  0x30 },
-	{  166000000,  0x11 },
-	{  167000000,  0x12 },
-	{  168000000,  0x13 },
-	{  169000000,  0x14 },
-	{  170000000,  0x15 },
-	{  172000000,  0x16 },
-	{  173000000,  0x17 },
-	{  174000000,  0x18 },
-	{  175000000,  0x1A },
-	{  176000000,  0x1B },
-	{  178000000,  0x1D },
-	{  179000000,  0x1E },
-	{  180000000,  0x1F },
-	{  181000000,  0x20 },
-	{  182000000,  0x21 },
-	{  183000000,  0x22 },
-	{  184000000,  0x24 },
-	{  185000000,  0x25 },
-	{  186000000,  0x26 },
-	{  187000000,  0x27 },
-	{  188000000,  0x29 },
-	{  189000000,  0x2A },
-	{  190000000,  0x2C },
-	{  191000000,  0x2D },
-	{  192000000,  0x2E },
-	{  193000000,  0x2F },
-	{  194000000,  0x30 },
-	{  195000000,  0x33 },
-	{  196000000,  0x35 },
-	{  198000000,  0x36 },
-	{  200000000,  0x38 },
-	{  201000000,  0x3C },
-	{  202000000,  0x3D },
-	{  203500000,  0x3E },
-	{  206000000,  0x0E },
-	{  208000000,  0x0F },
-	{  212000000,  0x10 },
-	{  216000000,  0x11 },
-	{  217000000,  0x12 },
-	{  218000000,  0x13 },
-	{  220000000,  0x14 },
-	{  222000000,  0x15 },
-	{  225000000,  0x16 },
-	{  228000000,  0x17 },
-	{  231000000,  0x18 },
-	{  234000000,  0x19 },
-	{  235000000,  0x1A },
-	{  236000000,  0x1B },
-	{  237000000,  0x1C },
-	{  240000000,  0x1D },
-	{  242000000,  0x1E },
-	{  244000000,  0x1F },
-	{  247000000,  0x20 },
-	{  249000000,  0x21 },
-	{  252000000,  0x22 },
-	{  253000000,  0x23 },
-	{  254000000,  0x24 },
-	{  256000000,  0x25 },
-	{  259000000,  0x26 },
-	{  262000000,  0x27 },
-	{  264000000,  0x28 },
-	{  267000000,  0x29 },
-	{  269000000,  0x2A },
-	{  271000000,  0x2B },
-	{  273000000,  0x2C },
-	{  275000000,  0x2D },
-	{  277000000,  0x2E },
-	{  279000000,  0x2F },
-	{  282000000,  0x30 },
-	{  284000000,  0x31 },
-	{  286000000,  0x32 },
-	{  287000000,  0x33 },
-	{  290000000,  0x34 },
-	{  293000000,  0x35 },
-	{  295000000,  0x36 },
-	{  297000000,  0x37 },
-	{  300000000,  0x38 },
-	{  303000000,  0x39 },
-	{  305000000,  0x3A },
-	{  306000000,  0x3B },
-	{  307000000,  0x3C },
-	{  310000000,  0x3D },
-	{  312000000,  0x3E },
-	{  315000000,  0x3F },
-	{  318000000,  0x40 },
-	{  320000000,  0x41 },
-	{  323000000,  0x42 },
-	{  324000000,  0x43 },
-	{  325000000,  0x44 },
-	{  327000000,  0x45 },
-	{  331000000,  0x46 },
-	{  334000000,  0x47 },
-	{  337000000,  0x48 },
-	{  339000000,  0x49 },
-	{  340000000,  0x4A },
-	{  341000000,  0x4B },
-	{  343000000,  0x4C },
-	{  345000000,  0x4D },
-	{  349000000,  0x4E },
-	{  352000000,  0x4F },
-	{  353000000,  0x50 },
-	{  355000000,  0x51 },
-	{  357000000,  0x52 },
-	{  359000000,  0x53 },
-	{  361000000,  0x54 },
-	{  362000000,  0x55 },
-	{  364000000,  0x56 },
-	{  368000000,  0x57 },
-	{  370000000,  0x58 },
-	{  372000000,  0x59 },
-	{  375000000,  0x5A },
-	{  376000000,  0x5B },
-	{  377000000,  0x5C },
-	{  379000000,  0x5D },
-	{  382000000,  0x5E },
-	{  384000000,  0x5F },
-	{  385000000,  0x60 },
-	{  386000000,  0x61 },
-	{  388000000,  0x62 },
-	{  390000000,  0x63 },
-	{  393000000,  0x64 },
-	{  394000000,  0x65 },
-	{  396000000,  0x66 },
-	{  397000000,  0x67 },
-	{  398000000,  0x68 },
-	{  400000000,  0x69 },
-	{  402000000,  0x6A },
-	{  403000000,  0x6B },
-	{  407000000,  0x6C },
-	{  408000000,  0x6D },
-	{  409000000,  0x6E },
-	{  410000000,  0x6F },
-	{  411000000,  0x70 },
-	{  412000000,  0x71 },
-	{  413000000,  0x72 },
-	{  414000000,  0x73 },
-	{  417000000,  0x74 },
-	{  418000000,  0x75 },
-	{  420000000,  0x76 },
-	{  422000000,  0x77 },
-	{  423000000,  0x78 },
-	{  424000000,  0x79 },
-	{  427000000,  0x7A },
-	{  428000000,  0x7B },
-	{  429000000,  0x7D },
-	{  432000000,  0x7F },
-	{  434000000,  0x80 },
-	{  435000000,  0x81 },
-	{  436000000,  0x83 },
-	{  437000000,  0x84 },
-	{  438000000,  0x85 },
-	{  439000000,  0x86 },
-	{  440000000,  0x87 },
-	{  441000000,  0x88 },
-	{  442000000,  0x89 },
-	{  445000000,  0x8A },
-	{  446000000,  0x8B },
-	{  447000000,  0x8C },
-	{  448000000,  0x8E },
-	{  449000000,  0x8F },
-	{  450000000,  0x90 },
-	{  452000000,  0x91 },
-	{  453000000,  0x93 },
-	{  454000000,  0x94 },
-	{  456000000,  0x96 },
-	{  457800000,  0x98 },
-	{  461000000,  0x11 },
-	{  468000000,  0x12 },
-	{  472000000,  0x13 },
-	{  473000000,  0x14 },
-	{  474000000,  0x15 },
-	{  481000000,  0x16 },
-	{  486000000,  0x17 },
-	{  491000000,  0x18 },
-	{  498000000,  0x19 },
-	{  499000000,  0x1A },
-	{  501000000,  0x1B },
-	{  506000000,  0x1C },
-	{  511000000,  0x1D },
-	{  516000000,  0x1E },
-	{  520000000,  0x1F },
-	{  521000000,  0x20 },
-	{  525000000,  0x21 },
-	{  529000000,  0x22 },
-	{  533000000,  0x23 },
-	{  539000000,  0x24 },
-	{  541000000,  0x25 },
-	{  547000000,  0x26 },
-	{  549000000,  0x27 },
-	{  551000000,  0x28 },
-	{  556000000,  0x29 },
-	{  561000000,  0x2A },
-	{  563000000,  0x2B },
-	{  565000000,  0x2C },
-	{  569000000,  0x2D },
-	{  571000000,  0x2E },
-	{  577000000,  0x2F },
-	{  580000000,  0x30 },
-	{  582000000,  0x31 },
-	{  584000000,  0x32 },
-	{  588000000,  0x33 },
-	{  591000000,  0x34 },
-	{  596000000,  0x35 },
-	{  598000000,  0x36 },
-	{  603000000,  0x37 },
-	{  604000000,  0x38 },
-	{  606000000,  0x39 },
-	{  612000000,  0x3A },
-	{  615000000,  0x3B },
-	{  617000000,  0x3C },
-	{  621000000,  0x3D },
-	{  622000000,  0x3E },
-	{  625000000,  0x3F },
-	{  632000000,  0x40 },
-	{  633000000,  0x41 },
-	{  634000000,  0x42 },
-	{  642000000,  0x43 },
-	{  643000000,  0x44 },
-	{  647000000,  0x45 },
-	{  650000000,  0x46 },
-	{  652000000,  0x47 },
-	{  657000000,  0x48 },
-	{  661000000,  0x49 },
-	{  662000000,  0x4A },
-	{  665000000,  0x4B },
-	{  667000000,  0x4C },
-	{  670000000,  0x4D },
-	{  673000000,  0x4E },
-	{  676000000,  0x4F },
-	{  677000000,  0x50 },
-	{  681000000,  0x51 },
-	{  683000000,  0x52 },
-	{  686000000,  0x53 },
-	{  688000000,  0x54 },
-	{  689000000,  0x55 },
-	{  691000000,  0x56 },
-	{  695000000,  0x57 },
-	{  698000000,  0x58 },
-	{  703000000,  0x59 },
-	{  704000000,  0x5A },
-	{  705000000,  0x5B },
-	{  707000000,  0x5C },
-	{  710000000,  0x5D },
-	{  712000000,  0x5E },
-	{  717000000,  0x5F },
-	{  718000000,  0x60 },
-	{  721000000,  0x61 },
-	{  722000000,  0x62 },
-	{  723000000,  0x63 },
-	{  725000000,  0x64 },
-	{  727000000,  0x65 },
-	{  730000000,  0x66 },
-	{  732000000,  0x67 },
-	{  735000000,  0x68 },
-	{  740000000,  0x69 },
-	{  741000000,  0x6A },
-	{  742000000,  0x6B },
-	{  743000000,  0x6C },
-	{  745000000,  0x6D },
-	{  747000000,  0x6E },
-	{  748000000,  0x6F },
-	{  750000000,  0x70 },
-	{  752000000,  0x71 },
-	{  754000000,  0x72 },
-	{  757000000,  0x73 },
-	{  758000000,  0x74 },
-	{  760000000,  0x75 },
-	{  763000000,  0x76 },
-	{  764000000,  0x77 },
-	{  766000000,  0x78 },
-	{  767000000,  0x79 },
-	{  768000000,  0x7A },
-	{  773000000,  0x7B },
-	{  774000000,  0x7C },
-	{  776000000,  0x7D },
-	{  777000000,  0x7E },
-	{  778000000,  0x7F },
-	{  779000000,  0x80 },
-	{  781000000,  0x81 },
-	{  783000000,  0x82 },
-	{  784000000,  0x83 },
-	{  785000000,  0x84 },
-	{  786000000,  0x85 },
-	{  793000000,  0x86 },
-	{  794000000,  0x87 },
-	{  795000000,  0x88 },
-	{  797000000,  0x89 },
-	{  799000000,  0x8A },
-	{  801000000,  0x8B },
-	{  802000000,  0x8C },
-	{  803000000,  0x8D },
-	{  804000000,  0x8E },
-	{  810000000,  0x90 },
-	{  811000000,  0x91 },
-	{  812000000,  0x92 },
-	{  814000000,  0x93 },
-	{  816000000,  0x94 },
-	{  817000000,  0x96 },
-	{  818000000,  0x97 },
-	{  820000000,  0x98 },
-	{  821000000,  0x99 },
-	{  822000000,  0x9A },
-	{  828000000,  0x9B },
-	{  829000000,  0x9D },
-	{  830000000,  0x9F },
-	{  831000000,  0xA0 },
-	{  833000000,  0xA1 },
-	{  835000000,  0xA2 },
-	{  836000000,  0xA3 },
-	{  837000000,  0xA4 },
-	{  838000000,  0xA6 },
-	{  840000000,  0xA8 },
-	{  842000000,  0xA9 },
-	{  845000000,  0xAA },
-	{  846000000,  0xAB },
-	{  847000000,  0xAD },
-	{  848000000,  0xAE },
-	{  852000000,  0xAF },
-	{  853000000,  0xB0 },
-	{  858000000,  0xB1 },
-	{  860000000,  0xB2 },
-	{  861000000,  0xB3 },
-	{  862000000,  0xB4 },
-	{  863000000,  0xB6 },
-	{  864000000,  0xB8 },
-	{  865000000,  0xB9 },
-	{          0,  0x00 },    /* Table End */
-};
-
-
-static struct SMap2  m_KM_Map[] = {
-	{   47900000,  3, 2 },
-	{   61100000,  3, 1 },
-	{  350000000,  3, 0 },
-	{  720000000,  2, 1 },
-	{  865000000,  3, 3 },
-	{          0,  0x00 },    /* Table End */
-};
-
-static struct SMap2 m_Main_PLL_Map[] = {
-	{  33125000, 0x57, 0xF0 },
-	{  35500000, 0x56, 0xE0 },
-	{  38188000, 0x55, 0xD0 },
-	{  41375000, 0x54, 0xC0 },
-	{  45125000, 0x53, 0xB0 },
-	{  49688000, 0x52, 0xA0 },
-	{  55188000, 0x51, 0x90 },
-	{  62125000, 0x50, 0x80 },
-	{  66250000, 0x47, 0x78 },
-	{  71000000, 0x46, 0x70 },
-	{  76375000, 0x45, 0x68 },
-	{  82750000, 0x44, 0x60 },
-	{  90250000, 0x43, 0x58 },
-	{  99375000, 0x42, 0x50 },
-	{ 110375000, 0x41, 0x48 },
-	{ 124250000, 0x40, 0x40 },
-	{ 132500000, 0x37, 0x3C },
-	{ 142000000, 0x36, 0x38 },
-	{ 152750000, 0x35, 0x34 },
-	{ 165500000, 0x34, 0x30 },
-	{ 180500000, 0x33, 0x2C },
-	{ 198750000, 0x32, 0x28 },
-	{ 220750000, 0x31, 0x24 },
-	{ 248500000, 0x30, 0x20 },
-	{ 265000000, 0x27, 0x1E },
-	{ 284000000, 0x26, 0x1C },
-	{ 305500000, 0x25, 0x1A },
-	{ 331000000, 0x24, 0x18 },
-	{ 361000000, 0x23, 0x16 },
-	{ 397500000, 0x22, 0x14 },
-	{ 441500000, 0x21, 0x12 },
-	{ 497000000, 0x20, 0x10 },
-	{ 530000000, 0x17, 0x0F },
-	{ 568000000, 0x16, 0x0E },
-	{ 611000000, 0x15, 0x0D },
-	{ 662000000, 0x14, 0x0C },
-	{ 722000000, 0x13, 0x0B },
-	{ 795000000, 0x12, 0x0A },
-	{ 883000000, 0x11, 0x09 },
-	{ 994000000, 0x10, 0x08 },
-	{         0, 0x00, 0x00 },    /* Table End */
-};
-
-static struct SMap2 m_Cal_PLL_Map[] = {
-	{  33813000, 0xDD, 0xD0 },
-	{  36625000, 0xDC, 0xC0 },
-	{  39938000, 0xDB, 0xB0 },
-	{  43938000, 0xDA, 0xA0 },
-	{  48813000, 0xD9, 0x90 },
-	{  54938000, 0xD8, 0x80 },
-	{  62813000, 0xD3, 0x70 },
-	{  67625000, 0xCD, 0x68 },
-	{  73250000, 0xCC, 0x60 },
-	{  79875000, 0xCB, 0x58 },
-	{  87875000, 0xCA, 0x50 },
-	{  97625000, 0xC9, 0x48 },
-	{ 109875000, 0xC8, 0x40 },
-	{ 125625000, 0xC3, 0x38 },
-	{ 135250000, 0xBD, 0x34 },
-	{ 146500000, 0xBC, 0x30 },
-	{ 159750000, 0xBB, 0x2C },
-	{ 175750000, 0xBA, 0x28 },
-	{ 195250000, 0xB9, 0x24 },
-	{ 219750000, 0xB8, 0x20 },
-	{ 251250000, 0xB3, 0x1C },
-	{ 270500000, 0xAD, 0x1A },
-	{ 293000000, 0xAC, 0x18 },
-	{ 319500000, 0xAB, 0x16 },
-	{ 351500000, 0xAA, 0x14 },
-	{ 390500000, 0xA9, 0x12 },
-	{ 439500000, 0xA8, 0x10 },
-	{ 502500000, 0xA3, 0x0E },
-	{ 541000000, 0x9D, 0x0D },
-	{ 586000000, 0x9C, 0x0C },
-	{ 639000000, 0x9B, 0x0B },
-	{ 703000000, 0x9A, 0x0A },
-	{ 781000000, 0x99, 0x09 },
-	{ 879000000, 0x98, 0x08 },
-	{         0, 0x00, 0x00 },    /* Table End */
-};
-
-static struct SMap  m_GainTaper_Map[] = {
-	{  45400000, 0x1F },
-	{  45800000, 0x1E },
-	{  46200000, 0x1D },
-	{  46700000, 0x1C },
-	{  47100000, 0x1B },
-	{  47500000, 0x1A },
-	{  47900000, 0x19 },
-	{  49600000, 0x17 },
-	{  51200000, 0x16 },
-	{  52900000, 0x15 },
-	{  54500000, 0x14 },
-	{  56200000, 0x13 },
-	{  57800000, 0x12 },
-	{  59500000, 0x11 },
-	{  61100000, 0x10 },
-	{  67600000, 0x0D },
-	{  74200000, 0x0C },
-	{  80700000, 0x0B },
-	{  87200000, 0x0A },
-	{  93800000, 0x09 },
-	{ 100300000, 0x08 },
-	{ 106900000, 0x07 },
-	{ 113400000, 0x06 },
-	{ 119900000, 0x05 },
-	{ 126500000, 0x04 },
-	{ 133000000, 0x03 },
-	{ 139500000, 0x02 },
-	{ 146100000, 0x01 },
-	{ 152600000, 0x00 },
-	{ 154300000, 0x1F },
-	{ 156100000, 0x1E },
-	{ 157800000, 0x1D },
-	{ 159500000, 0x1C },
-	{ 161200000, 0x1B },
-	{ 163000000, 0x1A },
-	{ 164700000, 0x19 },
-	{ 170200000, 0x17 },
-	{ 175800000, 0x16 },
-	{ 181300000, 0x15 },
-	{ 186900000, 0x14 },
-	{ 192400000, 0x13 },
-	{ 198000000, 0x12 },
-	{ 203500000, 0x11 },
-	{ 216200000, 0x14 },
-	{ 228900000, 0x13 },
-	{ 241600000, 0x12 },
-	{ 254400000, 0x11 },
-	{ 267100000, 0x10 },
-	{ 279800000, 0x0F },
-	{ 292500000, 0x0E },
-	{ 305200000, 0x0D },
-	{ 317900000, 0x0C },
-	{ 330700000, 0x0B },
-	{ 343400000, 0x0A },
-	{ 356100000, 0x09 },
-	{ 368800000, 0x08 },
-	{ 381500000, 0x07 },
-	{ 394200000, 0x06 },
-	{ 406900000, 0x05 },
-	{ 419700000, 0x04 },
-	{ 432400000, 0x03 },
-	{ 445100000, 0x02 },
-	{ 457800000, 0x01 },
-	{ 476300000, 0x19 },
-	{ 494800000, 0x18 },
-	{ 513300000, 0x17 },
-	{ 531800000, 0x16 },
-	{ 550300000, 0x15 },
-	{ 568900000, 0x14 },
-	{ 587400000, 0x13 },
-	{ 605900000, 0x12 },
-	{ 624400000, 0x11 },
-	{ 642900000, 0x10 },
-	{ 661400000, 0x0F },
-	{ 679900000, 0x0E },
-	{ 698400000, 0x0D },
-	{ 716900000, 0x0C },
-	{ 735400000, 0x0B },
-	{ 753900000, 0x0A },
-	{ 772500000, 0x09 },
-	{ 791000000, 0x08 },
-	{ 809500000, 0x07 },
-	{ 828000000, 0x06 },
-	{ 846500000, 0x05 },
-	{ 865000000, 0x04 },
-	{         0, 0x00 },    /* Table End */
-};
-
-static struct SMap m_RF_Cal_DC_Over_DT_Map[] = {
-	{  47900000, 0x00 },
-	{  55000000, 0x00 },
-	{  61100000, 0x0A },
-	{  64000000, 0x0A },
-	{  82000000, 0x14 },
-	{  84000000, 0x19 },
-	{ 119000000, 0x1C },
-	{ 124000000, 0x20 },
-	{ 129000000, 0x2A },
-	{ 134000000, 0x32 },
-	{ 139000000, 0x39 },
-	{ 144000000, 0x3E },
-	{ 149000000, 0x3F },
-	{ 152600000, 0x40 },
-	{ 154000000, 0x40 },
-	{ 164700000, 0x41 },
-	{ 203500000, 0x32 },
-	{ 353000000, 0x19 },
-	{ 356000000, 0x1A },
-	{ 359000000, 0x1B },
-	{ 363000000, 0x1C },
-	{ 366000000, 0x1D },
-	{ 369000000, 0x1E },
-	{ 373000000, 0x1F },
-	{ 376000000, 0x20 },
-	{ 379000000, 0x21 },
-	{ 383000000, 0x22 },
-	{ 386000000, 0x23 },
-	{ 389000000, 0x24 },
-	{ 393000000, 0x25 },
-	{ 396000000, 0x26 },
-	{ 399000000, 0x27 },
-	{ 402000000, 0x28 },
-	{ 404000000, 0x29 },
-	{ 407000000, 0x2A },
-	{ 409000000, 0x2B },
-	{ 412000000, 0x2C },
-	{ 414000000, 0x2D },
-	{ 417000000, 0x2E },
-	{ 419000000, 0x2F },
-	{ 422000000, 0x30 },
-	{ 424000000, 0x31 },
-	{ 427000000, 0x32 },
-	{ 429000000, 0x33 },
-	{ 432000000, 0x34 },
-	{ 434000000, 0x35 },
-	{ 437000000, 0x36 },
-	{ 439000000, 0x37 },
-	{ 442000000, 0x38 },
-	{ 444000000, 0x39 },
-	{ 447000000, 0x3A },
-	{ 449000000, 0x3B },
-	{ 457800000, 0x3C },
-	{ 465000000, 0x0F },
-	{ 477000000, 0x12 },
-	{ 483000000, 0x14 },
-	{ 502000000, 0x19 },
-	{ 508000000, 0x1B },
-	{ 519000000, 0x1C },
-	{ 522000000, 0x1D },
-	{ 524000000, 0x1E },
-	{ 534000000, 0x1F },
-	{ 549000000, 0x20 },
-	{ 554000000, 0x22 },
-	{ 584000000, 0x24 },
-	{ 589000000, 0x26 },
-	{ 658000000, 0x27 },
-	{ 664000000, 0x2C },
-	{ 669000000, 0x2D },
-	{ 699000000, 0x2E },
-	{ 704000000, 0x30 },
-	{ 709000000, 0x31 },
-	{ 714000000, 0x32 },
-	{ 724000000, 0x33 },
-	{ 729000000, 0x36 },
-	{ 739000000, 0x38 },
-	{ 744000000, 0x39 },
-	{ 749000000, 0x3B },
-	{ 754000000, 0x3C },
-	{ 759000000, 0x3D },
-	{ 764000000, 0x3E },
-	{ 769000000, 0x3F },
-	{ 774000000, 0x40 },
-	{ 779000000, 0x41 },
-	{ 784000000, 0x43 },
-	{ 789000000, 0x46 },
-	{ 794000000, 0x48 },
-	{ 799000000, 0x4B },
-	{ 804000000, 0x4F },
-	{ 809000000, 0x54 },
-	{ 814000000, 0x59 },
-	{ 819000000, 0x5D },
-	{ 824000000, 0x61 },
-	{ 829000000, 0x68 },
-	{ 834000000, 0x6E },
-	{ 839000000, 0x75 },
-	{ 844000000, 0x7E },
-	{ 849000000, 0x82 },
-	{ 854000000, 0x84 },
-	{ 859000000, 0x8F },
-	{ 865000000, 0x9A },
-	{         0, 0x00 },    /* Table End */
-};
-
-
-static struct SMap  m_IR_Meas_Map[] = {
-	{ 200000000, 0x05 },
-	{ 400000000, 0x06 },
-	{ 865000000, 0x07 },
-	{         0, 0x00 },    /* Table End */
-};
-
-static struct SMap2 m_CID_Target_Map[] = {
-	{  46000000, 0x04, 18 },
-	{  52200000, 0x0A, 15 },
-	{  70100000, 0x01, 40 },
-	{ 136800000, 0x18, 40 },
-	{ 156700000, 0x18, 40 },
-	{ 186250000, 0x0A, 40 },
-	{ 230000000, 0x0A, 40 },
-	{ 345000000, 0x18, 40 },
-	{ 426000000, 0x0E, 40 },
-	{ 489500000, 0x1E, 40 },
-	{ 697500000, 0x32, 40 },
-	{ 842000000, 0x3A, 40 },
-	{         0, 0x00,  0 },    /* Table End */
-};
-
-static struct SRFBandMap  m_RF_Band_Map[7] = {
-	{   47900000,   46000000,           0,          0},
-	{   61100000,   52200000,           0,          0},
-	{  152600000,   70100000,   136800000,          0},
-	{  164700000,  156700000,           0,          0},
-	{  203500000,  186250000,           0,          0},
-	{  457800000,  230000000,   345000000,  426000000},
-	{  865000000,  489500000,   697500000,  842000000},
-};
-
-u8 m_Thermometer_Map_1[16] = {
-	60, 62, 66, 64,
-	74, 72, 68, 70,
-	90, 88, 84, 86,
-	76, 78, 82, 80,
-};
-
-u8 m_Thermometer_Map_2[16] = {
-	92, 94, 98, 96,
-	106, 104, 100, 102,
-	122, 120, 116, 118,
-	108, 110, 114, 112,
-};
diff --git a/drivers/media/dvb/frontends/tda665x.c b/drivers/media/dvb/frontends/tda665x.c
deleted file mode 100644
index 2c1c759..0000000
--- a/drivers/media/dvb/frontends/tda665x.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
-	TDA665x tuner driver
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "tda665x.h"
-
-struct tda665x_state {
-	struct dvb_frontend		*fe;
-	struct i2c_adapter		*i2c;
-	const struct tda665x_config	*config;
-
-	u32 frequency;
-	u32 bandwidth;
-};
-
-static int tda665x_read(struct tda665x_state *state, u8 *buf)
-{
-	const struct tda665x_config *config = state->config;
-	int err = 0;
-	struct i2c_msg msg = { .addr = config->addr, .flags = I2C_M_RD, .buf = buf, .len = 2 };
-
-	err = i2c_transfer(state->i2c, &msg, 1);
-	if (err != 1)
-		goto exit;
-
-	return err;
-exit:
-	printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err);
-	return err;
-}
-
-static int tda665x_write(struct tda665x_state *state, u8 *buf, u8 length)
-{
-	const struct tda665x_config *config = state->config;
-	int err = 0;
-	struct i2c_msg msg = { .addr = config->addr, .flags = 0, .buf = buf, .len = length };
-
-	err = i2c_transfer(state->i2c, &msg, 1);
-	if (err != 1)
-		goto exit;
-
-	return err;
-exit:
-	printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err);
-	return err;
-}
-
-static int tda665x_get_state(struct dvb_frontend *fe,
-			     enum tuner_param param,
-			     struct tuner_state *tstate)
-{
-	struct tda665x_state *state = fe->tuner_priv;
-	int err = 0;
-
-	switch (param) {
-	case DVBFE_TUNER_FREQUENCY:
-		tstate->frequency = state->frequency;
-		break;
-	case DVBFE_TUNER_BANDWIDTH:
-		break;
-	default:
-		printk(KERN_ERR "%s: Unknown parameter (param=%d)\n", __func__, param);
-		err = -EINVAL;
-		break;
-	}
-
-	return err;
-}
-
-static int tda665x_get_status(struct dvb_frontend *fe, u32 *status)
-{
-	struct tda665x_state *state = fe->tuner_priv;
-	u8 result = 0;
-	int err = 0;
-
-	*status = 0;
-
-	err = tda665x_read(state, &result);
-	if (err < 0)
-		goto exit;
-
-	if ((result >> 6) & 0x01) {
-		printk(KERN_DEBUG "%s: Tuner Phase Locked\n", __func__);
-		*status = 1;
-	}
-
-	return err;
-exit:
-	printk(KERN_ERR "%s: I/O Error\n", __func__);
-	return err;
-}
-
-static int tda665x_set_state(struct dvb_frontend *fe,
-			     enum tuner_param param,
-			     struct tuner_state *tstate)
-{
-	struct tda665x_state *state = fe->tuner_priv;
-	const struct tda665x_config *config = state->config;
-	u32 frequency, status = 0;
-	u8 buf[4];
-	int err = 0;
-
-	if (param & DVBFE_TUNER_FREQUENCY) {
-
-		frequency = tstate->frequency;
-		if ((frequency < config->frequency_max) || (frequency > config->frequency_min)) {
-			printk(KERN_ERR "%s: Frequency beyond limits, frequency=%d\n", __func__, frequency);
-			return -EINVAL;
-		}
-
-		frequency += config->frequency_offst;
-		frequency *= config->ref_multiplier;
-		frequency += config->ref_divider >> 1;
-		frequency /= config->ref_divider;
-
-		buf[0] = (u8) ((frequency & 0x7f00) >> 8);
-		buf[1] = (u8) (frequency & 0x00ff) >> 0;
-		buf[2] = 0x80 | 0x40 | 0x02;
-		buf[3] = 0x00;
-
-		/* restore frequency */
-		frequency = tstate->frequency;
-
-		if (frequency < 153000000) {
-			/* VHF-L */
-			buf[3] |= 0x01; /* fc, Low Band, 47 - 153 MHz */
-			if (frequency < 68000000)
-				buf[3] |= 0x40; /* 83uA */
-			if (frequency < 1040000000)
-				buf[3] |= 0x60; /* 122uA */
-			if (frequency < 1250000000)
-				buf[3] |= 0x80; /* 163uA */
-			else
-				buf[3] |= 0xa0; /* 254uA */
-		} else if (frequency < 438000000) {
-			/* VHF-H */
-			buf[3] |= 0x02; /* fc, Mid Band, 153 - 438 MHz */
-			if (frequency < 230000000)
-				buf[3] |= 0x40;
-			if (frequency < 300000000)
-				buf[3] |= 0x60;
-			else
-				buf[3] |= 0x80;
-		} else {
-			/* UHF */
-			buf[3] |= 0x04; /* fc, High Band, 438 - 862 MHz */
-			if (frequency < 470000000)
-				buf[3] |= 0x60;
-			if (frequency < 526000000)
-				buf[3] |= 0x80;
-			else
-				buf[3] |= 0xa0;
-		}
-
-		/* Set params */
-		err = tda665x_write(state, buf, 5);
-		if (err < 0)
-			goto exit;
-
-		/* sleep for some time */
-		printk(KERN_DEBUG "%s: Waiting to Phase LOCK\n", __func__);
-		msleep(20);
-		/* check status */
-		err = tda665x_get_status(fe, &status);
-		if (err < 0)
-			goto exit;
-
-		if (status == 1) {
-			printk(KERN_DEBUG "%s: Tuner Phase locked: status=%d\n", __func__, status);
-			state->frequency = frequency; /* cache successful state */
-		} else {
-			printk(KERN_ERR "%s: No Phase lock: status=%d\n", __func__, status);
-		}
-	} else {
-		printk(KERN_ERR "%s: Unknown parameter (param=%d)\n", __func__, param);
-		return -EINVAL;
-	}
-
-	return 0;
-exit:
-	printk(KERN_ERR "%s: I/O Error\n", __func__);
-	return err;
-}
-
-static int tda665x_release(struct dvb_frontend *fe)
-{
-	struct tda665x_state *state = fe->tuner_priv;
-
-	fe->tuner_priv = NULL;
-	kfree(state);
-	return 0;
-}
-
-static struct dvb_tuner_ops tda665x_ops = {
-
-	.set_state	= tda665x_set_state,
-	.get_state	= tda665x_get_state,
-	.get_status	= tda665x_get_status,
-	.release	= tda665x_release
-};
-
-struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe,
-				    const struct tda665x_config *config,
-				    struct i2c_adapter *i2c)
-{
-	struct tda665x_state *state = NULL;
-	struct dvb_tuner_info *info;
-
-	state = kzalloc(sizeof(struct tda665x_state), GFP_KERNEL);
-	if (state == NULL)
-		goto exit;
-
-	state->config		= config;
-	state->i2c		= i2c;
-	state->fe		= fe;
-	fe->tuner_priv		= state;
-	fe->ops.tuner_ops	= tda665x_ops;
-	info			 = &fe->ops.tuner_ops.info;
-
-	memcpy(info->name, config->name, sizeof(config->name));
-	info->frequency_min	= config->frequency_min;
-	info->frequency_max	= config->frequency_max;
-	info->frequency_step	= config->frequency_offst;
-
-	printk(KERN_DEBUG "%s: Attaching TDA665x (%s) tuner\n", __func__, info->name);
-
-	return fe;
-
-exit:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(tda665x_attach);
-
-MODULE_DESCRIPTION("TDA665x driver");
-MODULE_AUTHOR("Manu Abraham");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/tda665x.h b/drivers/media/dvb/frontends/tda665x.h
deleted file mode 100644
index ec7927a..0000000
--- a/drivers/media/dvb/frontends/tda665x.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
-	TDA665x tuner driver
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __TDA665x_H
-#define __TDA665x_H
-
-struct tda665x_config {
-	char name[128];
-
-	u8	addr;
-	u32	frequency_min;
-	u32	frequency_max;
-	u32	frequency_offst;
-	u32	ref_multiplier;
-	u32	ref_divider;
-};
-
-#if defined(CONFIG_DVB_TDA665x) || (defined(CONFIG_DVB_TDA665x_MODULE) && defined(MODULE))
-
-extern struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe,
-					   const struct tda665x_config *config,
-					   struct i2c_adapter *i2c);
-
-#else
-
-static inline struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe,
-						  const struct tda665x_config *config,
-						  struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-#endif /* CONFIG_DVB_TDA665x */
-
-#endif /* __TDA665x_H */
diff --git a/drivers/media/dvb/frontends/tda8083.c b/drivers/media/dvb/frontends/tda8083.c
deleted file mode 100644
index 15912c9..0000000
--- a/drivers/media/dvb/frontends/tda8083.c
+++ /dev/null
@@ -1,487 +0,0 @@
-/*
-    Driver for Philips TDA8083 based QPSK Demodulator
-
-    Copyright (C) 2001 Convergence Integrated Media GmbH
-
-    written by Ralph Metzler <ralph@convergence.de>
-
-    adoption to the new DVB frontend API and diagnostic ioctl's
-    by Holger Waechtler <holger@convergence.de>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include "dvb_frontend.h"
-#include "tda8083.h"
-
-
-struct tda8083_state {
-	struct i2c_adapter* i2c;
-	/* configuration settings */
-	const struct tda8083_config* config;
-	struct dvb_frontend frontend;
-};
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "tda8083: " args); \
-	} while (0)
-
-
-static u8 tda8083_init_tab [] = {
-	0x04, 0x00, 0x4a, 0x79, 0x04, 0x00, 0xff, 0xea,
-	0x48, 0x42, 0x79, 0x60, 0x70, 0x52, 0x9a, 0x10,
-	0x0e, 0x10, 0xf2, 0xa7, 0x93, 0x0b, 0x05, 0xc8,
-	0x9d, 0x00, 0x42, 0x80, 0x00, 0x60, 0x40, 0x00,
-	0x00, 0x75, 0x00, 0xe0, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00
-};
-
-
-static int tda8083_writereg (struct tda8083_state* state, u8 reg, u8 data)
-{
-	int ret;
-	u8 buf [] = { reg, data };
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-
-	if (ret != 1)
-		dprintk ("%s: writereg error (reg %02x, ret == %i)\n",
-			__func__, reg, ret);
-
-	return (ret != 1) ? -1 : 0;
-}
-
-static int tda8083_readregs (struct tda8083_state* state, u8 reg1, u8 *b, u8 len)
-{
-	int ret;
-	struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = &reg1, .len = 1 },
-			   { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b, .len = len } };
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2)
-		dprintk ("%s: readreg error (reg %02x, ret == %i)\n",
-			__func__, reg1, ret);
-
-	return ret == 2 ? 0 : -1;
-}
-
-static inline u8 tda8083_readreg (struct tda8083_state* state, u8 reg)
-{
-	u8 val;
-
-	tda8083_readregs (state, reg, &val, 1);
-
-	return val;
-}
-
-static int tda8083_set_inversion (struct tda8083_state* state, fe_spectral_inversion_t inversion)
-{
-	/*  XXX FIXME: implement other modes than FEC_AUTO */
-	if (inversion == INVERSION_AUTO)
-		return 0;
-
-	return -EINVAL;
-}
-
-static int tda8083_set_fec (struct tda8083_state* state, fe_code_rate_t fec)
-{
-	if (fec == FEC_AUTO)
-		return tda8083_writereg (state, 0x07, 0xff);
-
-	if (fec >= FEC_1_2 && fec <= FEC_8_9)
-		return tda8083_writereg (state, 0x07, 1 << (FEC_8_9 - fec));
-
-	return -EINVAL;
-}
-
-static fe_code_rate_t tda8083_get_fec (struct tda8083_state* state)
-{
-	u8 index;
-	static fe_code_rate_t fec_tab [] = { FEC_8_9, FEC_1_2, FEC_2_3, FEC_3_4,
-				       FEC_4_5, FEC_5_6, FEC_6_7, FEC_7_8 };
-
-	index = tda8083_readreg(state, 0x0e) & 0x07;
-
-	return fec_tab [index];
-}
-
-static int tda8083_set_symbolrate (struct tda8083_state* state, u32 srate)
-{
-	u32 ratio;
-	u32 tmp;
-	u8 filter;
-
-	if (srate > 32000000)
-		srate = 32000000;
-	if (srate < 500000)
-		srate = 500000;
-
-	filter = 0;
-	if (srate < 24000000)
-		filter = 2;
-	if (srate < 16000000)
-		filter = 3;
-
-	tmp = 31250 << 16;
-	ratio = tmp / srate;
-
-	tmp = (tmp % srate) << 8;
-	ratio = (ratio << 8) + tmp / srate;
-
-	tmp = (tmp % srate) << 8;
-	ratio = (ratio << 8) + tmp / srate;
-
-	dprintk("tda8083: ratio == %08x\n", (unsigned int) ratio);
-
-	tda8083_writereg (state, 0x05, filter);
-	tda8083_writereg (state, 0x02, (ratio >> 16) & 0xff);
-	tda8083_writereg (state, 0x03, (ratio >>  8) & 0xff);
-	tda8083_writereg (state, 0x04, (ratio      ) & 0xff);
-
-	tda8083_writereg (state, 0x00, 0x3c);
-	tda8083_writereg (state, 0x00, 0x04);
-
-	return 1;
-}
-
-static void tda8083_wait_diseqc_fifo (struct tda8083_state* state, int timeout)
-{
-	unsigned long start = jiffies;
-
-	while (jiffies - start < timeout &&
-	       !(tda8083_readreg(state, 0x02) & 0x80))
-	{
-		msleep(50);
-	};
-}
-
-static int tda8083_set_tone (struct tda8083_state* state, fe_sec_tone_mode_t tone)
-{
-	tda8083_writereg (state, 0x26, 0xf1);
-
-	switch (tone) {
-	case SEC_TONE_OFF:
-		return tda8083_writereg (state, 0x29, 0x00);
-	case SEC_TONE_ON:
-		return tda8083_writereg (state, 0x29, 0x80);
-	default:
-		return -EINVAL;
-	};
-}
-
-static int tda8083_set_voltage (struct tda8083_state* state, fe_sec_voltage_t voltage)
-{
-	switch (voltage) {
-	case SEC_VOLTAGE_13:
-		return tda8083_writereg (state, 0x20, 0x00);
-	case SEC_VOLTAGE_18:
-		return tda8083_writereg (state, 0x20, 0x11);
-	default:
-		return -EINVAL;
-	};
-}
-
-static int tda8083_send_diseqc_burst (struct tda8083_state* state, fe_sec_mini_cmd_t burst)
-{
-	switch (burst) {
-	case SEC_MINI_A:
-		tda8083_writereg (state, 0x29, (5 << 2));  /* send burst A */
-		break;
-	case SEC_MINI_B:
-		tda8083_writereg (state, 0x29, (7 << 2));  /* send B */
-		break;
-	default:
-		return -EINVAL;
-	};
-
-	tda8083_wait_diseqc_fifo (state, 100);
-
-	return 0;
-}
-
-static int tda8083_send_diseqc_msg (struct dvb_frontend* fe,
-				    struct dvb_diseqc_master_cmd *m)
-{
-	struct tda8083_state* state = fe->demodulator_priv;
-	int i;
-
-	tda8083_writereg (state, 0x29, (m->msg_len - 3) | (1 << 2)); /* enable */
-
-	for (i=0; i<m->msg_len; i++)
-		tda8083_writereg (state, 0x23 + i, m->msg[i]);
-
-	tda8083_writereg (state, 0x29, (m->msg_len - 3) | (3 << 2)); /* send!! */
-
-	tda8083_wait_diseqc_fifo (state, 100);
-
-	return 0;
-}
-
-static int tda8083_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct tda8083_state* state = fe->demodulator_priv;
-
-	u8 signal = ~tda8083_readreg (state, 0x01);
-	u8 sync = tda8083_readreg (state, 0x02);
-
-	*status = 0;
-
-	if (signal > 10)
-		*status |= FE_HAS_SIGNAL;
-
-	if (sync & 0x01)
-		*status |= FE_HAS_CARRIER;
-
-	if (sync & 0x02)
-		*status |= FE_HAS_VITERBI;
-
-	if (sync & 0x10)
-		*status |= FE_HAS_SYNC;
-
-	if (sync & 0x20) /* frontend can not lock */
-		*status |= FE_TIMEDOUT;
-
-	if ((sync & 0x1f) == 0x1f)
-		*status |= FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int tda8083_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct tda8083_state* state = fe->demodulator_priv;
-	int ret;
-	u8 buf[3];
-
-	if ((ret = tda8083_readregs(state, 0x0b, buf, sizeof(buf))))
-		return ret;
-
-	*ber = ((buf[0] & 0x1f) << 16) | (buf[1] << 8) | buf[2];
-
-	return 0;
-}
-
-static int tda8083_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	struct tda8083_state* state = fe->demodulator_priv;
-
-	u8 signal = ~tda8083_readreg (state, 0x01);
-	*strength = (signal << 8) | signal;
-
-	return 0;
-}
-
-static int tda8083_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct tda8083_state* state = fe->demodulator_priv;
-
-	u8 _snr = tda8083_readreg (state, 0x08);
-	*snr = (_snr << 8) | _snr;
-
-	return 0;
-}
-
-static int tda8083_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct tda8083_state* state = fe->demodulator_priv;
-
-	*ucblocks = tda8083_readreg(state, 0x0f);
-	if (*ucblocks == 0xff)
-		*ucblocks = 0xffffffff;
-
-	return 0;
-}
-
-static int tda8083_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct tda8083_state* state = fe->demodulator_priv;
-
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	tda8083_set_inversion (state, p->inversion);
-	tda8083_set_fec(state, p->fec_inner);
-	tda8083_set_symbolrate(state, p->symbol_rate);
-
-	tda8083_writereg (state, 0x00, 0x3c);
-	tda8083_writereg (state, 0x00, 0x04);
-
-	return 0;
-}
-
-static int tda8083_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct tda8083_state* state = fe->demodulator_priv;
-
-	/*  FIXME: get symbolrate & frequency offset...*/
-	/*p->frequency = ???;*/
-	p->inversion = (tda8083_readreg (state, 0x0e) & 0x80) ?
-			INVERSION_ON : INVERSION_OFF;
-	p->fec_inner = tda8083_get_fec(state);
-	/*p->symbol_rate = tda8083_get_symbolrate (state);*/
-
-	return 0;
-}
-
-static int tda8083_sleep(struct dvb_frontend* fe)
-{
-	struct tda8083_state* state = fe->demodulator_priv;
-
-	tda8083_writereg (state, 0x00, 0x02);
-	return 0;
-}
-
-static int tda8083_init(struct dvb_frontend* fe)
-{
-	struct tda8083_state* state = fe->demodulator_priv;
-	int i;
-
-	for (i=0; i<44; i++)
-		tda8083_writereg (state, i, tda8083_init_tab[i]);
-
-	tda8083_writereg (state, 0x00, 0x3c);
-	tda8083_writereg (state, 0x00, 0x04);
-
-	return 0;
-}
-
-static int tda8083_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
-{
-	struct tda8083_state* state = fe->demodulator_priv;
-
-	tda8083_send_diseqc_burst (state, burst);
-	tda8083_writereg (state, 0x00, 0x3c);
-	tda8083_writereg (state, 0x00, 0x04);
-
-	return 0;
-}
-
-static int tda8083_diseqc_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
-{
-	struct tda8083_state* state = fe->demodulator_priv;
-
-	tda8083_set_tone (state, tone);
-	tda8083_writereg (state, 0x00, 0x3c);
-	tda8083_writereg (state, 0x00, 0x04);
-
-	return 0;
-}
-
-static int tda8083_diseqc_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
-{
-	struct tda8083_state* state = fe->demodulator_priv;
-
-	tda8083_set_voltage (state, voltage);
-	tda8083_writereg (state, 0x00, 0x3c);
-	tda8083_writereg (state, 0x00, 0x04);
-
-	return 0;
-}
-
-static void tda8083_release(struct dvb_frontend* fe)
-{
-	struct tda8083_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops tda8083_ops;
-
-struct dvb_frontend* tda8083_attach(const struct tda8083_config* config,
-				    struct i2c_adapter* i2c)
-{
-	struct tda8083_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct tda8083_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-
-	/* check if the demod is there */
-	if ((tda8083_readreg(state, 0x00)) != 0x05) goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &tda8083_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops tda8083_ops = {
-	.delsys = { SYS_DVBS },
-	.info = {
-		.name			= "Philips TDA8083 DVB-S",
-		.frequency_min		= 920000,     /* TDA8060 */
-		.frequency_max		= 2200000,    /* TDA8060 */
-		.frequency_stepsize	= 125,   /* kHz for QPSK frontends */
-	/*      .frequency_tolerance	= ???,*/
-		.symbol_rate_min	= 12000000,
-		.symbol_rate_max	= 30000000,
-	/*      .symbol_rate_tolerance	= ???,*/
-		.caps = FE_CAN_INVERSION_AUTO |
-			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
-			FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK | FE_CAN_MUTE_TS
-	},
-
-	.release = tda8083_release,
-
-	.init = tda8083_init,
-	.sleep = tda8083_sleep,
-
-	.set_frontend = tda8083_set_frontend,
-	.get_frontend = tda8083_get_frontend,
-
-	.read_status = tda8083_read_status,
-	.read_signal_strength = tda8083_read_signal_strength,
-	.read_snr = tda8083_read_snr,
-	.read_ber = tda8083_read_ber,
-	.read_ucblocks = tda8083_read_ucblocks,
-
-	.diseqc_send_master_cmd = tda8083_send_diseqc_msg,
-	.diseqc_send_burst = tda8083_diseqc_send_burst,
-	.set_tone = tda8083_diseqc_set_tone,
-	.set_voltage = tda8083_diseqc_set_voltage,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("Philips TDA8083 DVB-S Demodulator");
-MODULE_AUTHOR("Ralph Metzler, Holger Waechtler");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(tda8083_attach);
diff --git a/drivers/media/dvb/frontends/tda8083.h b/drivers/media/dvb/frontends/tda8083.h
deleted file mode 100644
index 5a03c14..0000000
--- a/drivers/media/dvb/frontends/tda8083.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
-    Driver for Grundig 29504-491, a Philips TDA8083 based QPSK Frontend
-
-    Copyright (C) 2001 Convergence Integrated Media GmbH
-
-    written by Ralph Metzler <ralph@convergence.de>
-
-    adoption to the new DVB frontend API and diagnostic ioctl's
-    by Holger Waechtler <holger@convergence.de>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef TDA8083_H
-#define TDA8083_H
-
-#include <linux/dvb/frontend.h>
-
-struct tda8083_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-};
-
-#if defined(CONFIG_DVB_TDA8083) || (defined(CONFIG_DVB_TDA8083_MODULE) && defined(MODULE))
-extern struct dvb_frontend* tda8083_attach(const struct tda8083_config* config,
-					   struct i2c_adapter* i2c);
-#else
-static inline struct dvb_frontend* tda8083_attach(const struct tda8083_config* config,
-					   struct i2c_adapter* i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_TDA8083
-
-#endif // TDA8083_H
diff --git a/drivers/media/dvb/frontends/tda8261.c b/drivers/media/dvb/frontends/tda8261.c
deleted file mode 100644
index 53c7d8f..0000000
--- a/drivers/media/dvb/frontends/tda8261.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
-	TDA8261 8PSK/QPSK tuner driver
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "tda8261.h"
-
-struct tda8261_state {
-	struct dvb_frontend		*fe;
-	struct i2c_adapter		*i2c;
-	const struct tda8261_config	*config;
-
-	/* state cache */
-	u32 frequency;
-	u32 bandwidth;
-};
-
-static int tda8261_read(struct tda8261_state *state, u8 *buf)
-{
-	const struct tda8261_config *config = state->config;
-	int err = 0;
-	struct i2c_msg msg = { .addr	= config->addr, .flags = I2C_M_RD,.buf = buf,  .len = 1 };
-
-	if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1)
-		printk("%s: read error, err=%d\n", __func__, err);
-
-	return err;
-}
-
-static int tda8261_write(struct tda8261_state *state, u8 *buf)
-{
-	const struct tda8261_config *config = state->config;
-	int err = 0;
-	struct i2c_msg msg = { .addr = config->addr, .flags = 0, .buf = buf, .len = 4 };
-
-	if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1)
-		printk("%s: write error, err=%d\n", __func__, err);
-
-	return err;
-}
-
-static int tda8261_get_status(struct dvb_frontend *fe, u32 *status)
-{
-	struct tda8261_state *state = fe->tuner_priv;
-	u8 result = 0;
-	int err = 0;
-
-	*status = 0;
-
-	if ((err = tda8261_read(state, &result)) < 0) {
-		printk("%s: I/O Error\n", __func__);
-		return err;
-	}
-	if ((result >> 6) & 0x01) {
-		printk("%s: Tuner Phase Locked\n", __func__);
-		*status = 1;
-	}
-
-	return err;
-}
-
-static const u32 div_tab[] = { 2000, 1000,  500,  250,  125 }; /* kHz */
-static const u8  ref_div[] = { 0x00, 0x01, 0x02, 0x05, 0x07 };
-
-static int tda8261_get_state(struct dvb_frontend *fe,
-			     enum tuner_param param,
-			     struct tuner_state *tstate)
-{
-	struct tda8261_state *state = fe->tuner_priv;
-	int err = 0;
-
-	switch (param) {
-	case DVBFE_TUNER_FREQUENCY:
-		tstate->frequency = state->frequency;
-		break;
-	case DVBFE_TUNER_BANDWIDTH:
-		tstate->bandwidth = 40000000; /* FIXME! need to calculate Bandwidth */
-		break;
-	default:
-		printk("%s: Unknown parameter (param=%d)\n", __func__, param);
-		err = -EINVAL;
-		break;
-	}
-
-	return err;
-}
-
-static int tda8261_set_state(struct dvb_frontend *fe,
-			     enum tuner_param param,
-			     struct tuner_state *tstate)
-{
-	struct tda8261_state *state = fe->tuner_priv;
-	const struct tda8261_config *config = state->config;
-	u32 frequency, N, status = 0;
-	u8 buf[4];
-	int err = 0;
-
-	if (param & DVBFE_TUNER_FREQUENCY) {
-		/**
-		 * N = Max VCO Frequency / Channel Spacing
-		 * Max VCO Frequency = VCO frequency + (channel spacing - 1)
-		 * (to account for half channel spacing on either side)
-		 */
-		frequency = tstate->frequency;
-		if ((frequency < 950000) || (frequency > 2150000)) {
-			printk("%s: Frequency beyond limits, frequency=%d\n", __func__, frequency);
-			return -EINVAL;
-		}
-		N = (frequency + (div_tab[config->step_size] - 1)) / div_tab[config->step_size];
-		printk("%s: Step size=%d, Divider=%d, PG=0x%02x (%d)\n",
-			__func__, config->step_size, div_tab[config->step_size], N, N);
-
-		buf[0] = (N >> 8) & 0xff;
-		buf[1] = N & 0xff;
-		buf[2] = (0x01 << 7) | ((ref_div[config->step_size] & 0x07) << 1);
-
-		if (frequency < 1450000)
-			buf[3] = 0x00;
-		else if (frequency < 2000000)
-			buf[3] = 0x40;
-		else if (frequency < 2150000)
-			buf[3] = 0x80;
-
-		/* Set params */
-		if ((err = tda8261_write(state, buf)) < 0) {
-			printk("%s: I/O Error\n", __func__);
-			return err;
-		}
-		/* sleep for some time */
-		printk("%s: Waiting to Phase LOCK\n", __func__);
-		msleep(20);
-		/* check status */
-		if ((err = tda8261_get_status(fe, &status)) < 0) {
-			printk("%s: I/O Error\n", __func__);
-			return err;
-		}
-		if (status == 1) {
-			printk("%s: Tuner Phase locked: status=%d\n", __func__, status);
-			state->frequency = frequency; /* cache successful state */
-		} else {
-			printk("%s: No Phase lock: status=%d\n", __func__, status);
-		}
-	} else {
-		printk("%s: Unknown parameter (param=%d)\n", __func__, param);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int tda8261_release(struct dvb_frontend *fe)
-{
-	struct tda8261_state *state = fe->tuner_priv;
-
-	fe->tuner_priv = NULL;
-	kfree(state);
-	return 0;
-}
-
-static struct dvb_tuner_ops tda8261_ops = {
-
-	.info = {
-		.name		= "TDA8261",
-//		.tuner_name	= NULL,
-		.frequency_min	=  950000,
-		.frequency_max	= 2150000,
-		.frequency_step = 0
-	},
-
-	.set_state	= tda8261_set_state,
-	.get_state	= tda8261_get_state,
-	.get_status	= tda8261_get_status,
-	.release	= tda8261_release
-};
-
-struct dvb_frontend *tda8261_attach(struct dvb_frontend *fe,
-				    const struct tda8261_config *config,
-				    struct i2c_adapter *i2c)
-{
-	struct tda8261_state *state = NULL;
-
-	if ((state = kzalloc(sizeof (struct tda8261_state), GFP_KERNEL)) == NULL)
-		goto exit;
-
-	state->config		= config;
-	state->i2c		= i2c;
-	state->fe		= fe;
-	fe->tuner_priv		= state;
-	fe->ops.tuner_ops	= tda8261_ops;
-
-	fe->ops.tuner_ops.info.frequency_step = div_tab[config->step_size];
-//	fe->ops.tuner_ops.tuner_name	 = &config->buf;
-
-//	printk("%s: Attaching %s TDA8261 8PSK/QPSK tuner\n",
-//		__func__, fe->ops.tuner_ops.tuner_name);
-	printk("%s: Attaching TDA8261 8PSK/QPSK tuner\n", __func__);
-
-	return fe;
-
-exit:
-	kfree(state);
-	return NULL;
-}
-
-EXPORT_SYMBOL(tda8261_attach);
-
-MODULE_AUTHOR("Manu Abraham");
-MODULE_DESCRIPTION("TDA8261 8PSK/QPSK Tuner");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/tda8261.h b/drivers/media/dvb/frontends/tda8261.h
deleted file mode 100644
index 006e453..0000000
--- a/drivers/media/dvb/frontends/tda8261.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
-	TDA8261 8PSK/QPSK tuner driver
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __TDA8261_H
-#define __TDA8261_H
-
-enum tda8261_step {
-	TDA8261_STEP_2000 = 0,	/* 2000 kHz */
-	TDA8261_STEP_1000,	/* 1000 kHz */
-	TDA8261_STEP_500,	/*  500 kHz */
-	TDA8261_STEP_250,	/*  250 kHz */
-	TDA8261_STEP_125	/*  125 kHz */
-};
-
-struct tda8261_config {
-//	u8			buf[16];
-	u8			addr;
-	enum tda8261_step	step_size;
-};
-
-#if defined(CONFIG_DVB_TDA8261) || (defined(CONFIG_DVB_TDA8261_MODULE) && defined(MODULE))
-
-extern struct dvb_frontend *tda8261_attach(struct dvb_frontend *fe,
-					   const struct tda8261_config *config,
-					   struct i2c_adapter *i2c);
-
-#else
-
-static inline struct dvb_frontend *tda8261_attach(struct dvb_frontend *fe,
-						  const struct tda8261_config *config,
-						  struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-
-#endif //CONFIG_DVB_TDA8261
-
-#endif// __TDA8261_H
diff --git a/drivers/media/dvb/frontends/tda8261_cfg.h b/drivers/media/dvb/frontends/tda8261_cfg.h
deleted file mode 100644
index 1af1ee4..0000000
--- a/drivers/media/dvb/frontends/tda8261_cfg.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
-	TDA8261 8PSK/QPSK tuner driver
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-static int tda8261_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
-	struct dvb_frontend_ops	*frontend_ops = NULL;
-	struct dvb_tuner_ops	*tuner_ops = NULL;
-	struct tuner_state	t_state;
-	int err = 0;
-
-	if (&fe->ops)
-		frontend_ops = &fe->ops;
-	if (&frontend_ops->tuner_ops)
-		tuner_ops = &frontend_ops->tuner_ops;
-	if (tuner_ops->get_state) {
-		if ((err = tuner_ops->get_state(fe, DVBFE_TUNER_FREQUENCY, &t_state)) < 0) {
-			printk("%s: Invalid parameter\n", __func__);
-			return err;
-		}
-		*frequency = t_state.frequency;
-		printk("%s: Frequency=%d\n", __func__, t_state.frequency);
-	}
-	return 0;
-}
-
-static int tda8261_set_frequency(struct dvb_frontend *fe, u32 frequency)
-{
-	struct dvb_frontend_ops	*frontend_ops = NULL;
-	struct dvb_tuner_ops	*tuner_ops = NULL;
-	struct tuner_state	t_state;
-	int err = 0;
-
-	t_state.frequency = frequency;
-	if (&fe->ops)
-		frontend_ops = &fe->ops;
-	if (&frontend_ops->tuner_ops)
-		tuner_ops = &frontend_ops->tuner_ops;
-	if (tuner_ops->set_state) {
-		if ((err = tuner_ops->set_state(fe, DVBFE_TUNER_FREQUENCY, &t_state)) < 0) {
-			printk("%s: Invalid parameter\n", __func__);
-			return err;
-		}
-	}
-	printk("%s: Frequency=%d\n", __func__, t_state.frequency);
-	return 0;
-}
-
-static int tda8261_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
-{
-	struct dvb_frontend_ops	*frontend_ops = &fe->ops;
-	struct dvb_tuner_ops	*tuner_ops = &frontend_ops->tuner_ops;
-	struct tuner_state	t_state;
-	int err = 0;
-
-	if (&fe->ops)
-		frontend_ops = &fe->ops;
-	if (&frontend_ops->tuner_ops)
-		tuner_ops = &frontend_ops->tuner_ops;
-	if (tuner_ops->get_state) {
-		if ((err = tuner_ops->get_state(fe, DVBFE_TUNER_BANDWIDTH, &t_state)) < 0) {
-			printk("%s: Invalid parameter\n", __func__);
-			return err;
-		}
-		*bandwidth = t_state.bandwidth;
-	}
-	printk("%s: Bandwidth=%d\n", __func__, t_state.bandwidth);
-	return 0;
-}
diff --git a/drivers/media/dvb/frontends/tda826x.c b/drivers/media/dvb/frontends/tda826x.c
deleted file mode 100644
index 04bbcc2..0000000
--- a/drivers/media/dvb/frontends/tda826x.c
+++ /dev/null
@@ -1,188 +0,0 @@
-  /*
-     Driver for Philips tda8262/tda8263 DVBS Silicon tuners
-
-     (c) 2006 Andrew de Quincey
-
-     This program is free software; you can redistribute it and/or modify
-     it under the terms of the GNU General Public License as published by
-     the Free Software Foundation; either version 2 of the License, or
-     (at your option) any later version.
-
-     This program is distributed in the hope that it will be useful,
-     but WITHOUT ANY WARRANTY; without even the implied warranty of
-     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
-     GNU General Public License for more details.
-
-     You should have received a copy of the GNU General Public License
-     along with this program; if not, write to the Free Software
-     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-  */
-
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/dvb/frontend.h>
-#include <asm/types.h>
-
-#include "tda826x.h"
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "tda826x: " args); \
-	} while (0)
-
-struct tda826x_priv {
-	/* i2c details */
-	int i2c_address;
-	struct i2c_adapter *i2c;
-	u8 has_loopthrough:1;
-	u32 frequency;
-};
-
-static int tda826x_release(struct dvb_frontend *fe)
-{
-	kfree(fe->tuner_priv);
-	fe->tuner_priv = NULL;
-	return 0;
-}
-
-static int tda826x_sleep(struct dvb_frontend *fe)
-{
-	struct tda826x_priv *priv = fe->tuner_priv;
-	int ret;
-	u8 buf [] = { 0x00, 0x8d };
-	struct i2c_msg msg = { .addr = priv->i2c_address, .flags = 0, .buf = buf, .len = 2 };
-
-	dprintk("%s:\n", __func__);
-
-	if (!priv->has_loopthrough)
-		buf[1] = 0xad;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if ((ret = i2c_transfer (priv->i2c, &msg, 1)) != 1) {
-		dprintk("%s: i2c error\n", __func__);
-	}
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-
-	return (ret == 1) ? 0 : ret;
-}
-
-static int tda826x_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct tda826x_priv *priv = fe->tuner_priv;
-	int ret;
-	u32 div;
-	u32 ksyms;
-	u32 bandwidth;
-	u8 buf [11];
-	struct i2c_msg msg = { .addr = priv->i2c_address, .flags = 0, .buf = buf, .len = 11 };
-
-	dprintk("%s:\n", __func__);
-
-	div = (p->frequency + (1000-1)) / 1000;
-
-	/* BW = ((1 + RO) * SR/2 + 5) * 1.3      [SR in MSPS, BW in MHz] */
-	/* with R0 = 0.35 and some transformations: */
-	ksyms = p->symbol_rate / 1000;
-	bandwidth = (878 * ksyms + 6500000) / 1000000 + 1;
-	if (bandwidth < 5)
-		bandwidth = 5;
-	else if (bandwidth > 36)
-		bandwidth = 36;
-
-	buf[0] = 0x00; // subaddress
-	buf[1] = 0x09; // powerdown RSSI + the magic value 1
-	if (!priv->has_loopthrough)
-		buf[1] |= 0x20; // power down loopthrough if not needed
-	buf[2] = (1<<5) | 0x0b; // 1Mhz + 0.45 VCO
-	buf[3] = div >> 7;
-	buf[4] = div << 1;
-	buf[5] = ((bandwidth - 5) << 3) | 7; /* baseband cut-off */
-	buf[6] = 0xfe; // baseband gain 9 db + no RF attenuation
-	buf[7] = 0x83; // charge pumps at high, tests off
-	buf[8] = 0x80; // recommended value 4 for AMPVCO + disable ports.
-	buf[9] = 0x1a; // normal caltime + recommended values for SELTH + SELVTL
-	buf[10] = 0xd4; // recommended value 13 for BBIAS + unknown bit set on
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if ((ret = i2c_transfer (priv->i2c, &msg, 1)) != 1) {
-		dprintk("%s: i2c error\n", __func__);
-	}
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-
-	priv->frequency = div * 1000;
-
-	return (ret == 1) ? 0 : ret;
-}
-
-static int tda826x_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
-	struct tda826x_priv *priv = fe->tuner_priv;
-	*frequency = priv->frequency;
-	return 0;
-}
-
-static struct dvb_tuner_ops tda826x_tuner_ops = {
-	.info = {
-		.name = "Philips TDA826X",
-		.frequency_min = 950000,
-		.frequency_max = 2175000
-	},
-	.release = tda826x_release,
-	.sleep = tda826x_sleep,
-	.set_params = tda826x_set_params,
-	.get_frequency = tda826x_get_frequency,
-};
-
-struct dvb_frontend *tda826x_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c, int has_loopthrough)
-{
-	struct tda826x_priv *priv = NULL;
-	u8 b1 [] = { 0, 0 };
-	struct i2c_msg msg[2] = {
-		{ .addr = addr, .flags = 0,        .buf = NULL, .len = 0 },
-		{ .addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 2 }
-	};
-	int ret;
-
-	dprintk("%s:\n", __func__);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	ret = i2c_transfer (i2c, msg, 2);
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-
-	if (ret != 2)
-		return NULL;
-	if (!(b1[1] & 0x80))
-		return NULL;
-
-	priv = kzalloc(sizeof(struct tda826x_priv), GFP_KERNEL);
-	if (priv == NULL)
-		return NULL;
-
-	priv->i2c_address = addr;
-	priv->i2c = i2c;
-	priv->has_loopthrough = has_loopthrough;
-
-	memcpy(&fe->ops.tuner_ops, &tda826x_tuner_ops, sizeof(struct dvb_tuner_ops));
-
-	fe->tuner_priv = priv;
-
-	return fe;
-}
-EXPORT_SYMBOL(tda826x_attach);
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("DVB TDA826x driver");
-MODULE_AUTHOR("Andrew de Quincey");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/tda826x.h b/drivers/media/dvb/frontends/tda826x.h
deleted file mode 100644
index 89e9792..0000000
--- a/drivers/media/dvb/frontends/tda826x.h
+++ /dev/null
@@ -1,53 +0,0 @@
-  /*
-     Driver for Philips tda8262/tda8263 DVBS Silicon tuners
-
-     (c) 2006 Andrew de Quincey
-
-     This program is free software; you can redistribute it and/or modify
-     it under the terms of the GNU General Public License as published by
-     the Free Software Foundation; either version 2 of the License, or
-     (at your option) any later version.
-
-     This program is distributed in the hope that it will be useful,
-     but WITHOUT ANY WARRANTY; without even the implied warranty of
-     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
-     GNU General Public License for more details.
-
-     You should have received a copy of the GNU General Public License
-     along with this program; if not, write to the Free Software
-     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-  */
-
-#ifndef __DVB_TDA826X_H__
-#define __DVB_TDA826X_H__
-
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-
-/**
- * Attach a tda826x tuner to the supplied frontend structure.
- *
- * @param fe Frontend to attach to.
- * @param addr i2c address of the tuner.
- * @param i2c i2c adapter to use.
- * @param has_loopthrough Set to 1 if the card has a loopthrough RF connector.
- * @return FE pointer on success, NULL on failure.
- */
-#if defined(CONFIG_DVB_TDA826X) || (defined(CONFIG_DVB_TDA826X_MODULE) && defined(MODULE))
-extern struct dvb_frontend* tda826x_attach(struct dvb_frontend *fe, int addr,
-					   struct i2c_adapter *i2c,
-					   int has_loopthrough);
-#else
-static inline struct dvb_frontend* tda826x_attach(struct dvb_frontend *fe,
-						  int addr,
-						  struct i2c_adapter *i2c,
-						  int has_loopthrough)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_TDA826X
-
-#endif // __DVB_TDA826X_H__
diff --git a/drivers/media/dvb/frontends/tdhd1.h b/drivers/media/dvb/frontends/tdhd1.h
deleted file mode 100644
index 1775098..0000000
--- a/drivers/media/dvb/frontends/tdhd1.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * tdhd1.h - ALPS TDHD1-204A tuner support
- *
- * Copyright (C) 2008 Oliver Endriss <o.endriss@gmx.de>
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * The project's page is at http://www.linuxtv.org
- */
-
-#ifndef TDHD1_H
-#define TDHD1_H
-
-#include "tda1004x.h"
-
-static int alps_tdhd1_204_request_firmware(struct dvb_frontend *fe, const struct firmware **fw, char *name);
-
-static struct tda1004x_config alps_tdhd1_204a_config = {
-	.demod_address = 0x8,
-	.invert = 1,
-	.invert_oclk = 0,
-	.xtal_freq = TDA10046_XTAL_4M,
-	.agc_config = TDA10046_AGC_DEFAULT,
-	.if_freq = TDA10046_FREQ_3617,
-	.request_firmware = alps_tdhd1_204_request_firmware
-};
-
-static int alps_tdhd1_204a_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct i2c_adapter *i2c = fe->tuner_priv;
-	u8 data[4];
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
-	u32 div;
-
-	div = (p->frequency + 36166666) / 166666;
-
-	data[0] = (div >> 8) & 0x7f;
-	data[1] = div & 0xff;
-	data[2] = 0x85;
-
-	if (p->frequency >= 174000000 && p->frequency <= 230000000)
-		data[3] = 0x02;
-	else if (p->frequency >= 470000000 && p->frequency <= 823000000)
-		data[3] = 0x0C;
-	else if (p->frequency > 823000000 && p->frequency <= 862000000)
-		data[3] = 0x8C;
-	else
-		return -EINVAL;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(i2c, &msg, 1) != 1)
-		return -EIO;
-
-	return 0;
-}
-
-#endif /* TDHD1_H */
diff --git a/drivers/media/dvb/frontends/tua6100.c b/drivers/media/dvb/frontends/tua6100.c
deleted file mode 100644
index 029384d..0000000
--- a/drivers/media/dvb/frontends/tua6100.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/**
- * Driver for Infineon tua6100 pll.
- *
- * (c) 2006 Andrew de Quincey
- *
- * Based on code found in budget-av.c, which has the following:
- * Compiled from various sources by Michael Hunold <michael@mihu.de>
- *
- * CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> &
- *                               Andrew de Quincey <adq_dvb@lidskialf.net>
- *
- * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
- *
- * Copyright (C) 1999-2002 Ralph  Metzler
- *                       & Marcus Metzler for convergence integrated media GmbH
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/dvb/frontend.h>
-#include <asm/types.h>
-
-#include "tua6100.h"
-
-struct tua6100_priv {
-	/* i2c details */
-	int i2c_address;
-	struct i2c_adapter *i2c;
-	u32 frequency;
-};
-
-static int tua6100_release(struct dvb_frontend *fe)
-{
-	kfree(fe->tuner_priv);
-	fe->tuner_priv = NULL;
-	return 0;
-}
-
-static int tua6100_sleep(struct dvb_frontend *fe)
-{
-	struct tua6100_priv *priv = fe->tuner_priv;
-	int ret;
-	u8 reg0[] = { 0x00, 0x00 };
-	struct i2c_msg msg = { .addr = priv->i2c_address, .flags = 0, .buf = reg0, .len = 2 };
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if ((ret = i2c_transfer (priv->i2c, &msg, 1)) != 1) {
-		printk("%s: i2c error\n", __func__);
-	}
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-
-	return (ret == 1) ? 0 : ret;
-}
-
-static int tua6100_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct tua6100_priv *priv = fe->tuner_priv;
-	u32 div;
-	u32 prediv;
-	u8 reg0[] = { 0x00, 0x00 };
-	u8 reg1[] = { 0x01, 0x00, 0x00, 0x00 };
-	u8 reg2[] = { 0x02, 0x00, 0x00 };
-	struct i2c_msg msg0 = { .addr = priv->i2c_address, .flags = 0, .buf = reg0, .len = 2 };
-	struct i2c_msg msg1 = { .addr = priv->i2c_address, .flags = 0, .buf = reg1, .len = 4 };
-	struct i2c_msg msg2 = { .addr = priv->i2c_address, .flags = 0, .buf = reg2, .len = 3 };
-
-#define _R 4
-#define _P 32
-#define _ri 4000000
-
-	// setup register 0
-	if (c->frequency < 2000000)
-		reg0[1] = 0x03;
-	else
-		reg0[1] = 0x07;
-
-	// setup register 1
-	if (c->frequency < 1630000)
-		reg1[1] = 0x2c;
-	else
-		reg1[1] = 0x0c;
-
-	if (_P == 64)
-		reg1[1] |= 0x40;
-	if (c->frequency >= 1525000)
-		reg1[1] |= 0x80;
-
-	// register 2
-	reg2[1] = (_R >> 8) & 0x03;
-	reg2[2] = _R;
-	if (c->frequency < 1455000)
-		reg2[1] |= 0x1c;
-	else if (c->frequency < 1630000)
-		reg2[1] |= 0x0c;
-	else
-		reg2[1] |= 0x1c;
-
-	/*
-	 * The N divisor ratio (note: c->frequency is in kHz, but we
-	 * need it in Hz)
-	 */
-	prediv = (c->frequency * _R) / (_ri / 1000);
-	div = prediv / _P;
-	reg1[1] |= (div >> 9) & 0x03;
-	reg1[2] = div >> 1;
-	reg1[3] = (div << 7);
-	priv->frequency = ((div * _P) * (_ri / 1000)) / _R;
-
-	// Finally, calculate and store the value for A
-	reg1[3] |= (prediv - (div*_P)) & 0x7f;
-
-#undef _R
-#undef _P
-#undef _ri
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(priv->i2c, &msg0, 1) != 1)
-		return -EIO;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(priv->i2c, &msg2, 1) != 1)
-		return -EIO;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(priv->i2c, &msg1, 1) != 1)
-		return -EIO;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-
-	return 0;
-}
-
-static int tua6100_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
-	struct tua6100_priv *priv = fe->tuner_priv;
-	*frequency = priv->frequency;
-	return 0;
-}
-
-static struct dvb_tuner_ops tua6100_tuner_ops = {
-	.info = {
-		.name = "Infineon TUA6100",
-		.frequency_min = 950000,
-		.frequency_max = 2150000,
-		.frequency_step = 1000,
-	},
-	.release = tua6100_release,
-	.sleep = tua6100_sleep,
-	.set_params = tua6100_set_params,
-	.get_frequency = tua6100_get_frequency,
-};
-
-struct dvb_frontend *tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c)
-{
-	struct tua6100_priv *priv = NULL;
-	u8 b1 [] = { 0x80 };
-	u8 b2 [] = { 0x00 };
-	struct i2c_msg msg [] = { { .addr = addr, .flags = 0, .buf = b1, .len = 1 },
-				  { .addr = addr, .flags = I2C_M_RD, .buf = b2, .len = 1 } };
-	int ret;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	ret = i2c_transfer (i2c, msg, 2);
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-
-	if (ret != 2)
-		return NULL;
-
-	priv = kzalloc(sizeof(struct tua6100_priv), GFP_KERNEL);
-	if (priv == NULL)
-		return NULL;
-
-	priv->i2c_address = addr;
-	priv->i2c = i2c;
-
-	memcpy(&fe->ops.tuner_ops, &tua6100_tuner_ops, sizeof(struct dvb_tuner_ops));
-	fe->tuner_priv = priv;
-	return fe;
-}
-EXPORT_SYMBOL(tua6100_attach);
-
-MODULE_DESCRIPTION("DVB tua6100 driver");
-MODULE_AUTHOR("Andrew de Quincey");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/tua6100.h b/drivers/media/dvb/frontends/tua6100.h
deleted file mode 100644
index f83dbd5..0000000
--- a/drivers/media/dvb/frontends/tua6100.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/**
- * Driver for Infineon tua6100 PLL.
- *
- * (c) 2006 Andrew de Quincey
- *
- * Based on code found in budget-av.c, which has the following:
- * Compiled from various sources by Michael Hunold <michael@mihu.de>
- *
- * CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> &
- *                               Andrew de Quincey <adq_dvb@lidskialf.net>
- *
- * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
- *
- * Copyright (C) 1999-2002 Ralph  Metzler
- *                       & Marcus Metzler for convergence integrated media GmbH
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __DVB_TUA6100_H__
-#define __DVB_TUA6100_H__
-
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-
-#if defined(CONFIG_DVB_TUA6100) || (defined(CONFIG_DVB_TUA6100_MODULE) && defined(MODULE))
-extern struct dvb_frontend *tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend* tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_TUA6100
-
-#endif
diff --git a/drivers/media/dvb/frontends/ves1820.c b/drivers/media/dvb/frontends/ves1820.c
deleted file mode 100644
index bb42b56..0000000
--- a/drivers/media/dvb/frontends/ves1820.c
+++ /dev/null
@@ -1,447 +0,0 @@
-/*
-    VES1820  - Single Chip Cable Channel Receiver driver module
-
-    Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <asm/div64.h>
-
-#include "dvb_frontend.h"
-#include "ves1820.h"
-
-
-
-struct ves1820_state {
-	struct i2c_adapter* i2c;
-	/* configuration settings */
-	const struct ves1820_config* config;
-	struct dvb_frontend frontend;
-
-	/* private demodulator data */
-	u8 reg0;
-	u8 pwm;
-};
-
-
-static int verbose;
-
-static u8 ves1820_inittab[] = {
-	0x69, 0x6A, 0x93, 0x1A, 0x12, 0x46, 0x26, 0x1A,
-	0x43, 0x6A, 0xAA, 0xAA, 0x1E, 0x85, 0x43, 0x20,
-	0xE0, 0x00, 0xA1, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00,
-	0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x40
-};
-
-static int ves1820_writereg(struct ves1820_state *state, u8 reg, u8 data)
-{
-	u8 buf[] = { 0x00, reg, data };
-	struct i2c_msg msg = {.addr = state->config->demod_address,.flags = 0,.buf = buf,.len = 3 };
-	int ret;
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-
-	if (ret != 1)
-		printk("ves1820: %s(): writereg error (reg == 0x%02x, "
-			"val == 0x%02x, ret == %i)\n", __func__, reg, data, ret);
-
-	return (ret != 1) ? -EREMOTEIO : 0;
-}
-
-static u8 ves1820_readreg(struct ves1820_state *state, u8 reg)
-{
-	u8 b0[] = { 0x00, reg };
-	u8 b1[] = { 0 };
-	struct i2c_msg msg[] = {
-		{.addr = state->config->demod_address,.flags = 0,.buf = b0,.len = 2},
-		{.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = b1,.len = 1}
-	};
-	int ret;
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2)
-		printk("ves1820: %s(): readreg error (reg == 0x%02x, "
-		"ret == %i)\n", __func__, reg, ret);
-
-	return b1[0];
-}
-
-static int ves1820_setup_reg0(struct ves1820_state *state, u8 reg0, fe_spectral_inversion_t inversion)
-{
-	reg0 |= state->reg0 & 0x62;
-
-	if (INVERSION_ON == inversion) {
-		if (!state->config->invert) reg0 |= 0x20;
-		else reg0 &= ~0x20;
-	} else if (INVERSION_OFF == inversion) {
-		if (!state->config->invert) reg0 &= ~0x20;
-		else reg0 |= 0x20;
-	}
-
-	ves1820_writereg(state, 0x00, reg0 & 0xfe);
-	ves1820_writereg(state, 0x00, reg0 | 0x01);
-
-	state->reg0 = reg0;
-
-	return 0;
-}
-
-static int ves1820_set_symbolrate(struct ves1820_state *state, u32 symbolrate)
-{
-	s32 BDR;
-	s32 BDRI;
-	s16 SFIL = 0;
-	u16 NDEC = 0;
-	u32 ratio;
-	u32 fin;
-	u32 tmp;
-	u64 fptmp;
-	u64 fpxin;
-
-	if (symbolrate > state->config->xin / 2)
-		symbolrate = state->config->xin / 2;
-
-	if (symbolrate < 500000)
-		symbolrate = 500000;
-
-	if (symbolrate < state->config->xin / 16)
-		NDEC = 1;
-	if (symbolrate < state->config->xin / 32)
-		NDEC = 2;
-	if (symbolrate < state->config->xin / 64)
-		NDEC = 3;
-
-	/* yeuch! */
-	fpxin = state->config->xin * 10;
-	fptmp = fpxin; do_div(fptmp, 123);
-	if (symbolrate < fptmp)
-		SFIL = 1;
-	fptmp = fpxin; do_div(fptmp, 160);
-	if (symbolrate < fptmp)
-		SFIL = 0;
-	fptmp = fpxin; do_div(fptmp, 246);
-	if (symbolrate < fptmp)
-		SFIL = 1;
-	fptmp = fpxin; do_div(fptmp, 320);
-	if (symbolrate < fptmp)
-		SFIL = 0;
-	fptmp = fpxin; do_div(fptmp, 492);
-	if (symbolrate < fptmp)
-		SFIL = 1;
-	fptmp = fpxin; do_div(fptmp, 640);
-	if (symbolrate < fptmp)
-		SFIL = 0;
-	fptmp = fpxin; do_div(fptmp, 984);
-	if (symbolrate < fptmp)
-		SFIL = 1;
-
-	fin = state->config->xin >> 4;
-	symbolrate <<= NDEC;
-	ratio = (symbolrate << 4) / fin;
-	tmp = ((symbolrate << 4) % fin) << 8;
-	ratio = (ratio << 8) + tmp / fin;
-	tmp = (tmp % fin) << 8;
-	ratio = (ratio << 8) + DIV_ROUND_CLOSEST(tmp, fin);
-
-	BDR = ratio;
-	BDRI = (((state->config->xin << 5) / symbolrate) + 1) / 2;
-
-	if (BDRI > 0xFF)
-		BDRI = 0xFF;
-
-	SFIL = (SFIL << 4) | ves1820_inittab[0x0E];
-
-	NDEC = (NDEC << 6) | ves1820_inittab[0x03];
-
-	ves1820_writereg(state, 0x03, NDEC);
-	ves1820_writereg(state, 0x0a, BDR & 0xff);
-	ves1820_writereg(state, 0x0b, (BDR >> 8) & 0xff);
-	ves1820_writereg(state, 0x0c, (BDR >> 16) & 0x3f);
-
-	ves1820_writereg(state, 0x0d, BDRI);
-	ves1820_writereg(state, 0x0e, SFIL);
-
-	return 0;
-}
-
-static int ves1820_init(struct dvb_frontend* fe)
-{
-	struct ves1820_state* state = fe->demodulator_priv;
-	int i;
-
-	ves1820_writereg(state, 0, 0);
-
-	for (i = 0; i < sizeof(ves1820_inittab); i++)
-		ves1820_writereg(state, i, ves1820_inittab[i]);
-	if (state->config->selagc)
-		ves1820_writereg(state, 2, ves1820_inittab[2] | 0x08);
-
-	ves1820_writereg(state, 0x34, state->pwm);
-
-	return 0;
-}
-
-static int ves1820_set_parameters(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct ves1820_state* state = fe->demodulator_priv;
-	static const u8 reg0x00[] = { 0x00, 0x04, 0x08, 0x0c, 0x10 };
-	static const u8 reg0x01[] = { 140, 140, 106, 100, 92 };
-	static const u8 reg0x05[] = { 135, 100, 70, 54, 38 };
-	static const u8 reg0x08[] = { 162, 116, 67, 52, 35 };
-	static const u8 reg0x09[] = { 145, 150, 106, 126, 107 };
-	int real_qam = p->modulation - QAM_16;
-
-	if (real_qam < 0 || real_qam > 4)
-		return -EINVAL;
-
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	ves1820_set_symbolrate(state, p->symbol_rate);
-	ves1820_writereg(state, 0x34, state->pwm);
-
-	ves1820_writereg(state, 0x01, reg0x01[real_qam]);
-	ves1820_writereg(state, 0x05, reg0x05[real_qam]);
-	ves1820_writereg(state, 0x08, reg0x08[real_qam]);
-	ves1820_writereg(state, 0x09, reg0x09[real_qam]);
-
-	ves1820_setup_reg0(state, reg0x00[real_qam], p->inversion);
-	ves1820_writereg(state, 2, ves1820_inittab[2] | (state->config->selagc ? 0x08 : 0));
-	return 0;
-}
-
-static int ves1820_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct ves1820_state* state = fe->demodulator_priv;
-	int sync;
-
-	*status = 0;
-	sync = ves1820_readreg(state, 0x11);
-
-	if (sync & 1)
-		*status |= FE_HAS_SIGNAL;
-
-	if (sync & 2)
-		*status |= FE_HAS_CARRIER;
-
-	if (sync & 2)	/* XXX FIXME! */
-		*status |= FE_HAS_VITERBI;
-
-	if (sync & 4)
-		*status |= FE_HAS_SYNC;
-
-	if (sync & 8)
-		*status |= FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int ves1820_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct ves1820_state* state = fe->demodulator_priv;
-
-	u32 _ber = ves1820_readreg(state, 0x14) |
-			(ves1820_readreg(state, 0x15) << 8) |
-			((ves1820_readreg(state, 0x16) & 0x0f) << 16);
-	*ber = 10 * _ber;
-
-	return 0;
-}
-
-static int ves1820_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	struct ves1820_state* state = fe->demodulator_priv;
-
-	u8 gain = ves1820_readreg(state, 0x17);
-	*strength = (gain << 8) | gain;
-
-	return 0;
-}
-
-static int ves1820_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct ves1820_state* state = fe->demodulator_priv;
-
-	u8 quality = ~ves1820_readreg(state, 0x18);
-	*snr = (quality << 8) | quality;
-
-	return 0;
-}
-
-static int ves1820_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct ves1820_state* state = fe->demodulator_priv;
-
-	*ucblocks = ves1820_readreg(state, 0x13) & 0x7f;
-	if (*ucblocks == 0x7f)
-		*ucblocks = 0xffffffff;
-
-	/* reset uncorrected block counter */
-	ves1820_writereg(state, 0x10, ves1820_inittab[0x10] & 0xdf);
-	ves1820_writereg(state, 0x10, ves1820_inittab[0x10]);
-
-	return 0;
-}
-
-static int ves1820_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct ves1820_state* state = fe->demodulator_priv;
-	int sync;
-	s8 afc = 0;
-
-	sync = ves1820_readreg(state, 0x11);
-	afc = ves1820_readreg(state, 0x19);
-	if (verbose) {
-		/* AFC only valid when carrier has been recovered */
-		printk(sync & 2 ? "ves1820: AFC (%d) %dHz\n" :
-			"ves1820: [AFC (%d) %dHz]\n", afc, -((s32) p->symbol_rate * afc) >> 10);
-	}
-
-	if (!state->config->invert) {
-		p->inversion = (state->reg0 & 0x20) ? INVERSION_ON : INVERSION_OFF;
-	} else {
-		p->inversion = (!(state->reg0 & 0x20)) ? INVERSION_ON : INVERSION_OFF;
-	}
-
-	p->modulation = ((state->reg0 >> 2) & 7) + QAM_16;
-
-	p->fec_inner = FEC_NONE;
-
-	p->frequency = ((p->frequency + 31250) / 62500) * 62500;
-	if (sync & 2)
-		p->frequency -= ((s32) p->symbol_rate * afc) >> 10;
-
-	return 0;
-}
-
-static int ves1820_sleep(struct dvb_frontend* fe)
-{
-	struct ves1820_state* state = fe->demodulator_priv;
-
-	ves1820_writereg(state, 0x1b, 0x02);	/* pdown ADC */
-	ves1820_writereg(state, 0x00, 0x80);	/* standby */
-
-	return 0;
-}
-
-static int ves1820_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
-{
-
-	fesettings->min_delay_ms = 200;
-	fesettings->step_size = 0;
-	fesettings->max_drift = 0;
-	return 0;
-}
-
-static void ves1820_release(struct dvb_frontend* fe)
-{
-	struct ves1820_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops ves1820_ops;
-
-struct dvb_frontend* ves1820_attach(const struct ves1820_config* config,
-				    struct i2c_adapter* i2c,
-				    u8 pwm)
-{
-	struct ves1820_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct ves1820_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->reg0 = ves1820_inittab[0];
-	state->config = config;
-	state->i2c = i2c;
-	state->pwm = pwm;
-
-	/* check if the demod is there */
-	if ((ves1820_readreg(state, 0x1a) & 0xf0) != 0x70)
-		goto error;
-
-	if (verbose)
-		printk("ves1820: pwm=0x%02x\n", state->pwm);
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &ves1820_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.ops.info.symbol_rate_min = (state->config->xin / 2) / 64;      /* SACLK/64 == (XIN/2)/64 */
-	state->frontend.ops.info.symbol_rate_max = (state->config->xin / 2) / 4;       /* SACLK/4 */
-	state->frontend.demodulator_priv = state;
-
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops ves1820_ops = {
-	.delsys = { SYS_DVBC_ANNEX_A },
-	.info = {
-		.name = "VLSI VES1820 DVB-C",
-		.frequency_stepsize = 62500,
-		.frequency_min = 47000000,
-		.frequency_max = 862000000,
-		.caps = FE_CAN_QAM_16 |
-			FE_CAN_QAM_32 |
-			FE_CAN_QAM_64 |
-			FE_CAN_QAM_128 |
-			FE_CAN_QAM_256 |
-			FE_CAN_FEC_AUTO
-	},
-
-	.release = ves1820_release,
-
-	.init = ves1820_init,
-	.sleep = ves1820_sleep,
-
-	.set_frontend = ves1820_set_parameters,
-	.get_frontend = ves1820_get_frontend,
-	.get_tune_settings = ves1820_get_tune_settings,
-
-	.read_status = ves1820_read_status,
-	.read_ber = ves1820_read_ber,
-	.read_signal_strength = ves1820_read_signal_strength,
-	.read_snr = ves1820_read_snr,
-	.read_ucblocks = ves1820_read_ucblocks,
-};
-
-module_param(verbose, int, 0644);
-MODULE_PARM_DESC(verbose, "print AFC offset after tuning for debugging the PWM setting");
-
-MODULE_DESCRIPTION("VLSI VES1820 DVB-C Demodulator driver");
-MODULE_AUTHOR("Ralph Metzler, Holger Waechtler");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(ves1820_attach);
diff --git a/drivers/media/dvb/frontends/ves1820.h b/drivers/media/dvb/frontends/ves1820.h
deleted file mode 100644
index e902ed6..0000000
--- a/drivers/media/dvb/frontends/ves1820.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
-    VES1820  - Single Chip Cable Channel Receiver driver module
-
-    Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef VES1820_H
-#define VES1820_H
-
-#include <linux/dvb/frontend.h>
-
-#define VES1820_SELAGC_PWM 0
-#define VES1820_SELAGC_SIGNAMPERR 1
-
-struct ves1820_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* value of XIN to use */
-	u32 xin;
-
-	/* does inversion need inverted? */
-	u8 invert:1;
-
-	/* SELAGC control */
-	u8 selagc:1;
-};
-
-#if defined(CONFIG_DVB_VES1820) || (defined(CONFIG_DVB_VES1820_MODULE) && defined(MODULE))
-extern struct dvb_frontend* ves1820_attach(const struct ves1820_config* config,
-					   struct i2c_adapter* i2c, u8 pwm);
-#else
-static inline struct dvb_frontend* ves1820_attach(const struct ves1820_config* config,
-					   struct i2c_adapter* i2c, u8 pwm)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_VES1820
-
-#endif // VES1820_H
diff --git a/drivers/media/dvb/frontends/ves1x93.c b/drivers/media/dvb/frontends/ves1x93.c
deleted file mode 100644
index 9c17eac..0000000
--- a/drivers/media/dvb/frontends/ves1x93.c
+++ /dev/null
@@ -1,553 +0,0 @@
-/*
-    Driver for VES1893 and VES1993 QPSK Demodulators
-
-    Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
-    Copyright (C) 2001 Ronny Strutz <3des@elitedvb.de>
-    Copyright (C) 2002 Dennis Noermann <dennis.noermann@noernet.de>
-    Copyright (C) 2002-2003 Andreas Oberritter <obi@linuxtv.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-
-#include "dvb_frontend.h"
-#include "ves1x93.h"
-
-
-struct ves1x93_state {
-	struct i2c_adapter* i2c;
-	/* configuration settings */
-	const struct ves1x93_config* config;
-	struct dvb_frontend frontend;
-
-	/* previous uncorrected block counter */
-	fe_spectral_inversion_t inversion;
-	u8 *init_1x93_tab;
-	u8 *init_1x93_wtab;
-	u8 tab_size;
-	u8 demod_type;
-	u32 frequency;
-};
-
-static int debug;
-#define dprintk	if (debug) printk
-
-#define DEMOD_VES1893		0
-#define DEMOD_VES1993		1
-
-static u8 init_1893_tab [] = {
-	0x01, 0xa4, 0x35, 0x80, 0x2a, 0x0b, 0x55, 0xc4,
-	0x09, 0x69, 0x00, 0x86, 0x4c, 0x28, 0x7f, 0x00,
-	0x00, 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x80, 0x00, 0x21, 0xb0, 0x14, 0x00, 0xdc, 0x00,
-	0x81, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x55, 0x00, 0x00, 0x7f, 0x00
-};
-
-static u8 init_1993_tab [] = {
-	0x00, 0x9c, 0x35, 0x80, 0x6a, 0x09, 0x72, 0x8c,
-	0x09, 0x6b, 0x00, 0x00, 0x4c, 0x08, 0x00, 0x00,
-	0x00, 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x80, 0x40, 0x21, 0xb0, 0x00, 0x00, 0x00, 0x10,
-	0x81, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x55, 0x03, 0x00, 0x00, 0x00, 0x00, 0x03,
-	0x00, 0x00, 0x0e, 0x80, 0x00
-};
-
-static u8 init_1893_wtab[] =
-{
-	1,1,1,1,1,1,1,1, 1,1,0,0,1,1,0,0,
-	0,1,0,0,0,0,0,0, 1,0,1,1,0,0,0,1,
-	1,1,1,0,0,0,0,0, 0,0,1,1,0,0,0,0,
-	1,1,1,0,1,1
-};
-
-static u8 init_1993_wtab[] =
-{
-	1,1,1,1,1,1,1,1, 1,1,0,0,1,1,0,0,
-	0,1,0,0,0,0,0,0, 1,1,1,1,0,0,0,1,
-	1,1,1,0,0,0,0,0, 0,0,1,1,0,0,0,0,
-	1,1,1,0,1,1,1,1, 1,1,1,1,1
-};
-
-static int ves1x93_writereg (struct ves1x93_state* state, u8 reg, u8 data)
-{
-	u8 buf [] = { 0x00, reg, data };
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 3 };
-	int err;
-
-	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-		dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static u8 ves1x93_readreg (struct ves1x93_state* state, u8 reg)
-{
-	int ret;
-	u8 b0 [] = { 0x00, reg };
-	u8 b1 [] = { 0 };
-	struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },
-			   { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
-
-	ret = i2c_transfer (state->i2c, msg, 2);
-
-	if (ret != 2) return ret;
-
-	return b1[0];
-}
-
-static int ves1x93_clr_bit (struct ves1x93_state* state)
-{
-	msleep(10);
-	ves1x93_writereg (state, 0, state->init_1x93_tab[0] & 0xfe);
-	ves1x93_writereg (state, 0, state->init_1x93_tab[0]);
-	msleep(50);
-	return 0;
-}
-
-static int ves1x93_set_inversion (struct ves1x93_state* state, fe_spectral_inversion_t inversion)
-{
-	u8 val;
-
-	/*
-	 * inversion on/off are interchanged because i and q seem to
-	 * be swapped on the hardware
-	 */
-
-	switch (inversion) {
-	case INVERSION_OFF:
-		val = 0xc0;
-		break;
-	case INVERSION_ON:
-		val = 0x80;
-		break;
-	case INVERSION_AUTO:
-		val = 0x00;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return ves1x93_writereg (state, 0x0c, (state->init_1x93_tab[0x0c] & 0x3f) | val);
-}
-
-static int ves1x93_set_fec (struct ves1x93_state* state, fe_code_rate_t fec)
-{
-	if (fec == FEC_AUTO)
-		return ves1x93_writereg (state, 0x0d, 0x08);
-	else if (fec < FEC_1_2 || fec > FEC_8_9)
-		return -EINVAL;
-	else
-		return ves1x93_writereg (state, 0x0d, fec - FEC_1_2);
-}
-
-static fe_code_rate_t ves1x93_get_fec (struct ves1x93_state* state)
-{
-	return FEC_1_2 + ((ves1x93_readreg (state, 0x0d) >> 4) & 0x7);
-}
-
-static int ves1x93_set_symbolrate (struct ves1x93_state* state, u32 srate)
-{
-	u32 BDR;
-	u32 ratio;
-	u8  ADCONF, FCONF, FNR, AGCR;
-	u32 BDRI;
-	u32 tmp;
-	u32 FIN;
-
-	dprintk("%s: srate == %d\n", __func__, (unsigned int) srate);
-
-	if (srate > state->config->xin/2)
-		srate = state->config->xin/2;
-
-	if (srate < 500000)
-		srate = 500000;
-
-#define MUL (1UL<<26)
-
-	FIN = (state->config->xin + 6000) >> 4;
-
-	tmp = srate << 6;
-	ratio = tmp / FIN;
-
-	tmp = (tmp % FIN) << 8;
-	ratio = (ratio << 8) + tmp / FIN;
-
-	tmp = (tmp % FIN) << 8;
-	ratio = (ratio << 8) + tmp / FIN;
-
-	FNR = 0xff;
-
-	if (ratio < MUL/3)	     FNR = 0;
-	if (ratio < (MUL*11)/50)     FNR = 1;
-	if (ratio < MUL/6)	     FNR = 2;
-	if (ratio < MUL/9)	     FNR = 3;
-	if (ratio < MUL/12)	     FNR = 4;
-	if (ratio < (MUL*11)/200)    FNR = 5;
-	if (ratio < MUL/24)	     FNR = 6;
-	if (ratio < (MUL*27)/1000)   FNR = 7;
-	if (ratio < MUL/48)	     FNR = 8;
-	if (ratio < (MUL*137)/10000) FNR = 9;
-
-	if (FNR == 0xff) {
-		ADCONF = 0x89;
-		FCONF  = 0x80;
-		FNR	= 0;
-	} else {
-		ADCONF = 0x81;
-		FCONF  = 0x88 | (FNR >> 1) | ((FNR & 0x01) << 5);
-		/*FCONF	 = 0x80 | ((FNR & 0x01) << 5) | (((FNR > 1) & 0x03) << 3) | ((FNR >> 1) & 0x07);*/
-	}
-
-	BDR = (( (ratio << (FNR >> 1)) >> 4) + 1) >> 1;
-	BDRI = ( ((FIN << 8) / ((srate << (FNR >> 1)) >> 2)) + 1) >> 1;
-
-	dprintk("FNR= %d\n", FNR);
-	dprintk("ratio= %08x\n", (unsigned int) ratio);
-	dprintk("BDR= %08x\n", (unsigned int) BDR);
-	dprintk("BDRI= %02x\n", (unsigned int) BDRI);
-
-	if (BDRI > 0xff)
-		BDRI = 0xff;
-
-	ves1x93_writereg (state, 0x06, 0xff & BDR);
-	ves1x93_writereg (state, 0x07, 0xff & (BDR >> 8));
-	ves1x93_writereg (state, 0x08, 0x0f & (BDR >> 16));
-
-	ves1x93_writereg (state, 0x09, BDRI);
-	ves1x93_writereg (state, 0x20, ADCONF);
-	ves1x93_writereg (state, 0x21, FCONF);
-
-	AGCR = state->init_1x93_tab[0x05];
-	if (state->config->invert_pwm)
-		AGCR |= 0x20;
-
-	if (srate < 6000000)
-		AGCR |= 0x80;
-	else
-		AGCR &= ~0x80;
-
-	ves1x93_writereg (state, 0x05, AGCR);
-
-	/* ves1993 hates this, will lose lock */
-	if (state->demod_type != DEMOD_VES1993)
-		ves1x93_clr_bit (state);
-
-	return 0;
-}
-
-static int ves1x93_init (struct dvb_frontend* fe)
-{
-	struct ves1x93_state* state = fe->demodulator_priv;
-	int i;
-	int val;
-
-	dprintk("%s: init chip\n", __func__);
-
-	for (i = 0; i < state->tab_size; i++) {
-		if (state->init_1x93_wtab[i]) {
-			val = state->init_1x93_tab[i];
-
-			if (state->config->invert_pwm && (i == 0x05)) val |= 0x20; /* invert PWM */
-			ves1x93_writereg (state, i, val);
-		}
-	}
-
-	return 0;
-}
-
-static int ves1x93_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
-{
-	struct ves1x93_state* state = fe->demodulator_priv;
-
-	switch (voltage) {
-	case SEC_VOLTAGE_13:
-		return ves1x93_writereg (state, 0x1f, 0x20);
-	case SEC_VOLTAGE_18:
-		return ves1x93_writereg (state, 0x1f, 0x30);
-	case SEC_VOLTAGE_OFF:
-		return ves1x93_writereg (state, 0x1f, 0x00);
-	default:
-		return -EINVAL;
-	}
-}
-
-static int ves1x93_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct ves1x93_state* state = fe->demodulator_priv;
-
-	u8 sync = ves1x93_readreg (state, 0x0e);
-
-	/*
-	 * The ves1893 sometimes returns sync values that make no sense,
-	 * because, e.g., the SIGNAL bit is 0, while some of the higher
-	 * bits are 1 (and how can there be a CARRIER w/o a SIGNAL?).
-	 * Tests showed that the VITERBI and SYNC bits are returned
-	 * reliably, while the SIGNAL and CARRIER bits ar sometimes wrong.
-	 * If such a case occurs, we read the value again, until we get a
-	 * valid value.
-	 */
-	int maxtry = 10; /* just for safety - let's not get stuck here */
-	while ((sync & 0x03) != 0x03 && (sync & 0x0c) && maxtry--) {
-		msleep(10);
-		sync = ves1x93_readreg (state, 0x0e);
-	}
-
-	*status = 0;
-
-	if (sync & 1)
-		*status |= FE_HAS_SIGNAL;
-
-	if (sync & 2)
-		*status |= FE_HAS_CARRIER;
-
-	if (sync & 4)
-		*status |= FE_HAS_VITERBI;
-
-	if (sync & 8)
-		*status |= FE_HAS_SYNC;
-
-	if ((sync & 0x1f) == 0x1f)
-		*status |= FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int ves1x93_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct ves1x93_state* state = fe->demodulator_priv;
-
-	*ber = ves1x93_readreg (state, 0x15);
-	*ber |= (ves1x93_readreg (state, 0x16) << 8);
-	*ber |= ((ves1x93_readreg (state, 0x17) & 0x0F) << 16);
-	*ber *= 10;
-
-	return 0;
-}
-
-static int ves1x93_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	struct ves1x93_state* state = fe->demodulator_priv;
-
-	u8 signal = ~ves1x93_readreg (state, 0x0b);
-	*strength = (signal << 8) | signal;
-
-	return 0;
-}
-
-static int ves1x93_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct ves1x93_state* state = fe->demodulator_priv;
-
-	u8 _snr = ~ves1x93_readreg (state, 0x1c);
-	*snr = (_snr << 8) | _snr;
-
-	return 0;
-}
-
-static int ves1x93_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct ves1x93_state* state = fe->demodulator_priv;
-
-	*ucblocks = ves1x93_readreg (state, 0x18) & 0x7f;
-
-	if (*ucblocks == 0x7f)
-		*ucblocks = 0xffffffff;   /* counter overflow... */
-
-	ves1x93_writereg (state, 0x18, 0x00);  /* reset the counter */
-	ves1x93_writereg (state, 0x18, 0x80);  /* dto. */
-
-	return 0;
-}
-
-static int ves1x93_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct ves1x93_state* state = fe->demodulator_priv;
-
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-	ves1x93_set_inversion (state, p->inversion);
-	ves1x93_set_fec(state, p->fec_inner);
-	ves1x93_set_symbolrate(state, p->symbol_rate);
-	state->inversion = p->inversion;
-	state->frequency = p->frequency;
-
-	return 0;
-}
-
-static int ves1x93_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct ves1x93_state* state = fe->demodulator_priv;
-	int afc;
-
-	afc = ((int)((char)(ves1x93_readreg (state, 0x0a) << 1)))/2;
-	afc = (afc * (int)(p->symbol_rate/1000/8))/16;
-
-	p->frequency = state->frequency - afc;
-
-	/*
-	 * inversion indicator is only valid
-	 * if auto inversion was used
-	 */
-	if (state->inversion == INVERSION_AUTO)
-		p->inversion = (ves1x93_readreg (state, 0x0f) & 2) ?
-				INVERSION_OFF : INVERSION_ON;
-	p->fec_inner = ves1x93_get_fec(state);
-	/*  XXX FIXME: timing offset !! */
-
-	return 0;
-}
-
-static int ves1x93_sleep(struct dvb_frontend* fe)
-{
-	struct ves1x93_state* state = fe->demodulator_priv;
-
-	return ves1x93_writereg (state, 0x00, 0x08);
-}
-
-static void ves1x93_release(struct dvb_frontend* fe)
-{
-	struct ves1x93_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static int ves1x93_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
-{
-	struct ves1x93_state* state = fe->demodulator_priv;
-
-	if (enable) {
-		return ves1x93_writereg(state, 0x00, 0x11);
-	} else {
-		return ves1x93_writereg(state, 0x00, 0x01);
-	}
-}
-
-static struct dvb_frontend_ops ves1x93_ops;
-
-struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config,
-				    struct i2c_adapter* i2c)
-{
-	struct ves1x93_state* state = NULL;
-	u8 identity;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct ves1x93_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->inversion = INVERSION_OFF;
-
-	/* check if the demod is there + identify it */
-	identity = ves1x93_readreg(state, 0x1e);
-	switch (identity) {
-	case 0xdc: /* VES1893A rev1 */
-		printk("ves1x93: Detected ves1893a rev1\n");
-		state->demod_type = DEMOD_VES1893;
-		state->init_1x93_tab = init_1893_tab;
-		state->init_1x93_wtab = init_1893_wtab;
-		state->tab_size = sizeof(init_1893_tab);
-		break;
-
-	case 0xdd: /* VES1893A rev2 */
-		printk("ves1x93: Detected ves1893a rev2\n");
-		state->demod_type = DEMOD_VES1893;
-		state->init_1x93_tab = init_1893_tab;
-		state->init_1x93_wtab = init_1893_wtab;
-		state->tab_size = sizeof(init_1893_tab);
-		break;
-
-	case 0xde: /* VES1993 */
-		printk("ves1x93: Detected ves1993\n");
-		state->demod_type = DEMOD_VES1993;
-		state->init_1x93_tab = init_1993_tab;
-		state->init_1x93_wtab = init_1993_wtab;
-		state->tab_size = sizeof(init_1993_tab);
-		break;
-
-	default:
-		goto error;
-	}
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &ves1x93_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops ves1x93_ops = {
-	.delsys = { SYS_DVBS },
-	.info = {
-		.name			= "VLSI VES1x93 DVB-S",
-		.frequency_min		= 950000,
-		.frequency_max		= 2150000,
-		.frequency_stepsize	= 125,		 /* kHz for QPSK frontends */
-		.frequency_tolerance	= 29500,
-		.symbol_rate_min	= 1000000,
-		.symbol_rate_max	= 45000000,
-	/*	.symbol_rate_tolerance	=	???,*/
-		.caps = FE_CAN_INVERSION_AUTO |
-			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK
-	},
-
-	.release = ves1x93_release,
-
-	.init = ves1x93_init,
-	.sleep = ves1x93_sleep,
-	.i2c_gate_ctrl = ves1x93_i2c_gate_ctrl,
-
-	.set_frontend = ves1x93_set_frontend,
-	.get_frontend = ves1x93_get_frontend,
-
-	.read_status = ves1x93_read_status,
-	.read_ber = ves1x93_read_ber,
-	.read_signal_strength = ves1x93_read_signal_strength,
-	.read_snr = ves1x93_read_snr,
-	.read_ucblocks = ves1x93_read_ucblocks,
-
-	.set_voltage = ves1x93_set_voltage,
-};
-
-module_param(debug, int, 0644);
-
-MODULE_DESCRIPTION("VLSI VES1x93 DVB-S Demodulator driver");
-MODULE_AUTHOR("Ralph Metzler");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(ves1x93_attach);
diff --git a/drivers/media/dvb/frontends/ves1x93.h b/drivers/media/dvb/frontends/ves1x93.h
deleted file mode 100644
index 8a5a49e..0000000
--- a/drivers/media/dvb/frontends/ves1x93.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
-    Driver for VES1893 and VES1993 QPSK Demodulators
-
-    Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
-    Copyright (C) 2001 Ronny Strutz <3des@elitedvb.de>
-    Copyright (C) 2002 Dennis Noermann <dennis.noermann@noernet.de>
-    Copyright (C) 2002-2003 Andreas Oberritter <obi@linuxtv.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef VES1X93_H
-#define VES1X93_H
-
-#include <linux/dvb/frontend.h>
-
-struct ves1x93_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* value of XIN to use */
-	u32 xin;
-
-	/* should PWM be inverted? */
-	u8 invert_pwm:1;
-};
-
-#if defined(CONFIG_DVB_VES1X93) || (defined(CONFIG_DVB_VES1X93_MODULE) && defined(MODULE))
-extern struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config,
-					   struct i2c_adapter* i2c);
-#else
-static inline struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config,
-					   struct i2c_adapter* i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif // CONFIG_DVB_VES1X93
-
-#endif // VES1X93_H
diff --git a/drivers/media/dvb/frontends/z0194a.h b/drivers/media/dvb/frontends/z0194a.h
deleted file mode 100644
index 96d86d6..0000000
--- a/drivers/media/dvb/frontends/z0194a.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/* z0194a.h Sharp z0194a tuner support
-*
-* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
-*
-*	This program is free software; you can redistribute it and/or modify it
-*	under the terms of the GNU General Public License as published by the
-*	Free Software Foundation, version 2.
-*
-* see Documentation/dvb/README.dvb-usb for more information
-*/
-
-#ifndef Z0194A
-#define Z0194A
-
-static int sharp_z0194a_set_symbol_rate(struct dvb_frontend *fe,
-					 u32 srate, u32 ratio)
-{
-	u8 aclk = 0;
-	u8 bclk = 0;
-
-	if (srate < 1500000) {
-		aclk = 0xb7; bclk = 0x47; }
-	else if (srate < 3000000) {
-		aclk = 0xb7; bclk = 0x4b; }
-	else if (srate < 7000000) {
-		aclk = 0xb7; bclk = 0x4f; }
-	else if (srate < 14000000) {
-		aclk = 0xb7; bclk = 0x53; }
-	else if (srate < 30000000) {
-		aclk = 0xb6; bclk = 0x53; }
-	else if (srate < 45000000) {
-		aclk = 0xb4; bclk = 0x51; }
-
-	stv0299_writereg(fe, 0x13, aclk);
-	stv0299_writereg(fe, 0x14, bclk);
-	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
-	stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
-	stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
-
-	return 0;
-}
-
-static u8 sharp_z0194a_inittab[] = {
-	0x01, 0x15,
-	0x02, 0x30,
-	0x03, 0x00,
-	0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
-	0x05, 0x35,   /* I2CT = 0, SCLT = 1, SDAT = 1 */
-	0x06, 0x40,   /* DAC not used, set to high impendance mode */
-	0x07, 0x00,   /* DAC LSB */
-	0x08, 0x40,   /* DiSEqC off, LNB power on OP2/LOCK pin on */
-	0x09, 0x00,   /* FIFO */
-	0x0c, 0x51,   /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
-	0x0d, 0x82,   /* DC offset compensation = ON, beta_agc1 = 2 */
-	0x0e, 0x23,   /* alpha_tmg = 2, beta_tmg = 3 */
-	0x10, 0x3f,   /* AGC2  0x3d */
-	0x11, 0x84,
-	0x12, 0xb9,
-	0x15, 0xc9,   /* lock detector threshold */
-	0x16, 0x00,
-	0x17, 0x00,
-	0x18, 0x00,
-	0x19, 0x00,
-	0x1a, 0x00,
-	0x1f, 0x50,
-	0x20, 0x00,
-	0x21, 0x00,
-	0x22, 0x00,
-	0x23, 0x00,
-	0x28, 0x00,  /* out imp: normal  out type: parallel FEC mode:0 */
-	0x29, 0x1e,  /* 1/2 threshold */
-	0x2a, 0x14,  /* 2/3 threshold */
-	0x2b, 0x0f,  /* 3/4 threshold */
-	0x2c, 0x09,  /* 5/6 threshold */
-	0x2d, 0x05,  /* 7/8 threshold */
-	0x2e, 0x01,
-	0x31, 0x1f,  /* test all FECs */
-	0x32, 0x19,  /* viterbi and synchro search */
-	0x33, 0xfc,  /* rs control */
-	0x34, 0x93,  /* error control */
-	0x0f, 0x52,
-	0xff, 0xff
-};
-
-#endif
diff --git a/drivers/media/dvb/frontends/zl10036.c b/drivers/media/dvb/frontends/zl10036.c
deleted file mode 100644
index 0903d46..0000000
--- a/drivers/media/dvb/frontends/zl10036.c
+++ /dev/null
@@ -1,520 +0,0 @@
-/**
- * Driver for Zarlink zl10036 DVB-S silicon tuner
- *
- * Copyright (C) 2006 Tino Reichardt
- * Copyright (C) 2007-2009 Matthias Schwarzott <zzam@gentoo.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License Version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- **
- * The data sheet for this tuner can be found at:
- *    http://www.mcmilk.de/projects/dvb-card/datasheets/ZL10036.pdf
- *
- * This one is working: (at my Avermedia DVB-S Pro)
- * - zl10036 (40pin, FTA)
- *
- * A driver for zl10038 should be very similar.
- */
-
-#include <linux/module.h>
-#include <linux/dvb/frontend.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-
-#include "zl10036.h"
-
-static int zl10036_debug;
-#define dprintk(level, args...) \
-	do { if (zl10036_debug & level) printk(KERN_DEBUG "zl10036: " args); \
-	} while (0)
-
-#define deb_info(args...)  dprintk(0x01, args)
-#define deb_i2c(args...)  dprintk(0x02, args)
-
-struct zl10036_state {
-	struct i2c_adapter *i2c;
-	const struct zl10036_config *config;
-	u32 frequency;
-	u8 br, bf;
-};
-
-
-/* This driver assumes the tuner is driven by a 10.111MHz Cristal */
-#define _XTAL 10111
-
-/* Some of the possible dividers:
- *   64, (write 0x05 to reg), freq step size   158kHz
- *   10, (write 0x0a to reg), freq step size 1.011kHz (used here)
- *    5, (write 0x09 to reg), freq step size 2.022kHz
- */
-
-#define _RDIV 10
-#define _RDIV_REG 0x0a
-#define _FR   (_XTAL/_RDIV)
-
-#define STATUS_POR 0x80 /* Power on Reset */
-#define STATUS_FL  0x40 /* Frequency & Phase Lock */
-
-/* read/write for zl10036 and zl10038 */
-
-static int zl10036_read_status_reg(struct zl10036_state *state)
-{
-	u8 status;
-	struct i2c_msg msg[1] = {
-		{ .addr = state->config->tuner_address, .flags = I2C_M_RD,
-		  .buf = &status, .len = sizeof(status) },
-	};
-
-	if (i2c_transfer(state->i2c, msg, 1) != 1) {
-		printk(KERN_ERR "%s: i2c read failed at addr=%02x\n",
-			__func__, state->config->tuner_address);
-		return -EIO;
-	}
-
-	deb_i2c("R(status): %02x  [FL=%d]\n", status,
-		(status & STATUS_FL) ? 1 : 0);
-	if (status & STATUS_POR)
-		deb_info("%s: Power-On-Reset bit enabled - "
-			"need to initialize the tuner\n", __func__);
-
-	return status;
-}
-
-static int zl10036_write(struct zl10036_state *state, u8 buf[], u8 count)
-{
-	struct i2c_msg msg[1] = {
-		{ .addr = state->config->tuner_address, .flags = 0,
-		  .buf = buf, .len = count },
-	};
-	u8 reg = 0;
-	int ret;
-
-	if (zl10036_debug & 0x02) {
-		/* every 8bit-value satisifes this!
-		 * so only check for debug log */
-		if ((buf[0] & 0x80) == 0x00)
-			reg = 2;
-		else if ((buf[0] & 0xc0) == 0x80)
-			reg = 4;
-		else if ((buf[0] & 0xf0) == 0xc0)
-			reg = 6;
-		else if ((buf[0] & 0xf0) == 0xd0)
-			reg = 8;
-		else if ((buf[0] & 0xf0) == 0xe0)
-			reg = 10;
-		else if ((buf[0] & 0xf0) == 0xf0)
-			reg = 12;
-
-		deb_i2c("W(%d):", reg);
-		{
-			int i;
-			for (i = 0; i < count; i++)
-				printk(KERN_CONT " %02x", buf[i]);
-			printk(KERN_CONT "\n");
-		}
-	}
-
-	ret = i2c_transfer(state->i2c, msg, 1);
-	if (ret != 1) {
-		printk(KERN_ERR "%s: i2c error, ret=%d\n", __func__, ret);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static int zl10036_release(struct dvb_frontend *fe)
-{
-	struct zl10036_state *state = fe->tuner_priv;
-
-	fe->tuner_priv = NULL;
-	kfree(state);
-
-	return 0;
-}
-
-static int zl10036_sleep(struct dvb_frontend *fe)
-{
-	struct zl10036_state *state = fe->tuner_priv;
-	u8 buf[] = { 0xf0, 0x80 }; /* regs 12/13 */
-	int ret;
-
-	deb_info("%s\n", __func__);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
-
-	ret = zl10036_write(state, buf, sizeof(buf));
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
-
-	return ret;
-}
-
-/**
- * register map of the ZL10036/ZL10038
- *
- * reg[default] content
- *  2[0x00]:   0 | N14 | N13 | N12 | N11 | N10 |  N9 |  N8
- *  3[0x00]:  N7 |  N6 |  N5 |  N4 |  N3 |  N2 |  N1 |  N0
- *  4[0x80]:   1 |   0 | RFG | BA1 | BA0 | BG1 | BG0 | LEN
- *  5[0x00]:  P0 |  C1 |  C0 |  R4 |  R3 |  R2 |  R1 |  R0
- *  6[0xc0]:   1 |   1 |   0 |   0 | RSD |   0 |   0 |   0
- *  7[0x20]:  P1 | BF6 | BF5 | BF4 | BF3 | BF2 | BF1 |   0
- *  8[0xdb]:   1 |   1 |   0 |   1 |   0 |  CC |   1 |   1
- *  9[0x30]: VSD |  V2 |  V1 |  V0 |  S3 |  S2 |  S1 |  S0
- * 10[0xe1]:   1 |   1 |   1 |   0 |   0 | LS2 | LS1 | LS0
- * 11[0xf5]:  WS | WH2 | WH1 | WH0 | WL2 | WL1 | WL0 | WRE
- * 12[0xf0]:   1 |   1 |   1 |   1 |   0 |   0 |   0 |   0
- * 13[0x28]:  PD | BR4 | BR3 | BR2 | BR1 | BR0 | CLR |  TL
- */
-
-static int zl10036_set_frequency(struct zl10036_state *state, u32 frequency)
-{
-	u8 buf[2];
-	u32 div, foffset;
-
-	div = (frequency + _FR/2) / _FR;
-	state->frequency = div * _FR;
-
-	foffset = frequency - state->frequency;
-
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = (div >> 0) & 0xff;
-
-	deb_info("%s: ftodo=%u fpriv=%u ferr=%d div=%u\n", __func__,
-		frequency, state->frequency, foffset, div);
-
-	return zl10036_write(state, buf, sizeof(buf));
-}
-
-static int zl10036_set_bandwidth(struct zl10036_state *state, u32 fbw)
-{
-	/* fbw is measured in kHz */
-	u8 br, bf;
-	int ret;
-	u8 buf_bf[] = {
-		0xc0, 0x00, /*   6/7: rsd=0 bf=0 */
-	};
-	u8 buf_br[] = {
-		0xf0, 0x00, /* 12/13: br=0xa clr=0 tl=0*/
-	};
-	u8 zl10036_rsd_off[] = { 0xc8 }; /* set RSD=1 */
-
-	/* ensure correct values */
-	if (fbw > 35000)
-		fbw = 35000;
-	if (fbw <  8000)
-		fbw =  8000;
-
-#define _BR_MAXIMUM (_XTAL/575) /* _XTAL / 575kHz = 17 */
-
-	/* <= 28,82 MHz */
-	if (fbw <= 28820) {
-		br = _BR_MAXIMUM;
-	} else {
-		/**
-		 *  f(bw)=34,6MHz f(xtal)=10.111MHz
-		 *  br = (10111/34600) * 63 * 1/K = 14;
-		 */
-		br = ((_XTAL * 21 * 1000) / (fbw * 419));
-	}
-
-	/* ensure correct values */
-	if (br < 4)
-		br = 4;
-	if (br > _BR_MAXIMUM)
-		br = _BR_MAXIMUM;
-
-	/*
-	 * k = 1.257
-	 * bf = fbw/_XTAL * br * k - 1 */
-
-	bf = (fbw * br * 1257) / (_XTAL * 1000) - 1;
-
-	/* ensure correct values */
-	if (bf > 62)
-		bf = 62;
-
-	buf_bf[1] = (bf << 1) & 0x7e;
-	buf_br[1] = (br << 2) & 0x7c;
-	deb_info("%s: BW=%d br=%u bf=%u\n", __func__, fbw, br, bf);
-
-	if (br != state->br) {
-		ret = zl10036_write(state, buf_br, sizeof(buf_br));
-		if (ret < 0)
-			return ret;
-	}
-
-	if (bf != state->bf) {
-		ret = zl10036_write(state, buf_bf, sizeof(buf_bf));
-		if (ret < 0)
-			return ret;
-
-		/* time = br/(32* fxtal) */
-		/* minimal sleep time to be calculated
-		 * maximum br is 63 -> max time = 2 /10 MHz = 2e-7 */
-		msleep(1);
-
-		ret = zl10036_write(state, zl10036_rsd_off,
-			sizeof(zl10036_rsd_off));
-		if (ret < 0)
-			return ret;
-	}
-
-	state->br = br;
-	state->bf = bf;
-
-	return 0;
-}
-
-static int zl10036_set_gain_params(struct zl10036_state *state,
-	int c)
-{
-	u8 buf[2];
-	u8 rfg, ba, bg;
-
-	/* default values */
-	rfg = 0; /* enable when using an lna */
-	ba = 1;
-	bg = 1;
-
-	/* reg 4 */
-	buf[0] = 0x80 | ((rfg << 5) & 0x20)
-		| ((ba  << 3) & 0x18) | ((bg  << 1) & 0x06);
-
-	if (!state->config->rf_loop_enable)
-		buf[0] |= 0x01;
-
-	/* P0=0 */
-	buf[1] = _RDIV_REG | ((c << 5) & 0x60);
-
-	deb_info("%s: c=%u rfg=%u ba=%u bg=%u\n", __func__, c, rfg, ba, bg);
-	return zl10036_write(state, buf, sizeof(buf));
-}
-
-static int zl10036_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct zl10036_state *state = fe->tuner_priv;
-	int ret = 0;
-	u32 frequency = p->frequency;
-	u32 fbw;
-	int i;
-	u8 c;
-
-	/* ensure correct values
-	 * maybe redundant as core already checks this */
-	if ((frequency < fe->ops.info.frequency_min)
-	||  (frequency > fe->ops.info.frequency_max))
-		return -EINVAL;
-
-	/**
-	 * alpha = 1.35 for dvb-s
-	 * fBW = (alpha*symbolrate)/(2*0.8)
-	 * 1.35 / (2*0.8) = 27 / 32
-	 */
-	fbw = (27 * p->symbol_rate) / 32;
-
-	/* scale to kHz */
-	fbw /= 1000;
-
-	/* Add safe margin of 3MHz */
-	fbw += 3000;
-
-	/* setting the charge pump - guessed values */
-	if (frequency < 950000)
-		return -EINVAL;
-	else if (frequency < 1250000)
-		c = 0;
-	else if (frequency < 1750000)
-		c = 1;
-	else if (frequency < 2175000)
-		c = 2;
-	else
-		return -EINVAL;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
-
-	ret = zl10036_set_gain_params(state, c);
-	if (ret < 0)
-		goto error;
-
-	ret = zl10036_set_frequency(state, p->frequency);
-	if (ret < 0)
-		goto error;
-
-	ret = zl10036_set_bandwidth(state, fbw);
-	if (ret < 0)
-		goto error;
-
-	/* wait for tuner lock - no idea if this is really needed */
-	for (i = 0; i < 20; i++) {
-		ret = zl10036_read_status_reg(state);
-		if (ret < 0)
-			goto error;
-
-		/* check Frequency & Phase Lock Bit */
-		if (ret & STATUS_FL)
-			break;
-
-		msleep(10);
-	}
-
-error:
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
-
-	return ret;
-}
-
-static int zl10036_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
-	struct zl10036_state *state = fe->tuner_priv;
-
-	*frequency = state->frequency;
-
-	return 0;
-}
-
-static int zl10036_init_regs(struct zl10036_state *state)
-{
-	int ret;
-	int i;
-
-	/* could also be one block from reg 2 to 13 and additional 10/11 */
-	u8 zl10036_init_tab[][2] = {
-		{ 0x04, 0x00 },		/*   2/3: div=0x400 - arbitrary value */
-		{ 0x8b, _RDIV_REG },	/*   4/5: rfg=0 ba=1 bg=1 len=? */
-					/*        p0=0 c=0 r=_RDIV_REG */
-		{ 0xc0, 0x20 },		/*   6/7: rsd=0 bf=0x10 */
-		{ 0xd3, 0x40 },		/*   8/9: from datasheet */
-		{ 0xe3, 0x5b },		/* 10/11: lock window level */
-		{ 0xf0, 0x28 },		/* 12/13: br=0xa clr=0 tl=0*/
-		{ 0xe3, 0xf9 },		/* 10/11: unlock window level */
-	};
-
-	/* invalid values to trigger writing */
-	state->br = 0xff;
-	state->bf = 0xff;
-
-	if (!state->config->rf_loop_enable)
-		zl10036_init_tab[1][0] |= 0x01;
-
-	deb_info("%s\n", __func__);
-
-	for (i = 0; i < ARRAY_SIZE(zl10036_init_tab); i++) {
-		ret = zl10036_write(state, zl10036_init_tab[i], 2);
-		if (ret < 0)
-			return ret;
-	}
-
-	return 0;
-}
-
-static int zl10036_init(struct dvb_frontend *fe)
-{
-	struct zl10036_state *state = fe->tuner_priv;
-	int ret = 0;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
-
-	ret = zl10036_read_status_reg(state);
-	if (ret < 0)
-		return ret;
-
-	/* Only init if Power-on-Reset bit is set? */
-	ret = zl10036_init_regs(state);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
-
-	return ret;
-}
-
-static struct dvb_tuner_ops zl10036_tuner_ops = {
-	.info = {
-		.name = "Zarlink ZL10036",
-		.frequency_min = 950000,
-		.frequency_max = 2175000
-	},
-	.init = zl10036_init,
-	.release = zl10036_release,
-	.sleep = zl10036_sleep,
-	.set_params = zl10036_set_params,
-	.get_frequency = zl10036_get_frequency,
-};
-
-struct dvb_frontend *zl10036_attach(struct dvb_frontend *fe,
-				    const struct zl10036_config *config,
-				    struct i2c_adapter *i2c)
-{
-	struct zl10036_state *state;
-	int ret;
-
-	if (!config) {
-		printk(KERN_ERR "%s: no config specified", __func__);
-		return NULL;
-	}
-
-	state = kzalloc(sizeof(struct zl10036_state), GFP_KERNEL);
-	if (!state)
-		return NULL;
-
-	state->config = config;
-	state->i2c = i2c;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
-
-	ret = zl10036_read_status_reg(state);
-	if (ret < 0) {
-		printk(KERN_ERR "%s: No zl10036 found\n", __func__);
-		goto error;
-	}
-
-	ret = zl10036_init_regs(state);
-	if (ret < 0) {
-		printk(KERN_ERR "%s: tuner initialization failed\n",
-			__func__);
-		goto error;
-	}
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
-
-	fe->tuner_priv = state;
-
-	memcpy(&fe->ops.tuner_ops, &zl10036_tuner_ops,
-		sizeof(struct dvb_tuner_ops));
-	printk(KERN_INFO "%s: tuner initialization (%s addr=0x%02x) ok\n",
-		__func__, fe->ops.tuner_ops.info.name, config->tuner_address);
-
-	return fe;
-
-error:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(zl10036_attach);
-
-module_param_named(debug, zl10036_debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-MODULE_DESCRIPTION("DVB ZL10036 driver");
-MODULE_AUTHOR("Tino Reichardt");
-MODULE_AUTHOR("Matthias Schwarzott");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/zl10036.h b/drivers/media/dvb/frontends/zl10036.h
deleted file mode 100644
index d84b8f8..0000000
--- a/drivers/media/dvb/frontends/zl10036.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/**
- * Driver for Zarlink ZL10036 DVB-S silicon tuner
- *
- * Copyright (C) 2006 Tino Reichardt
- * Copyright (C) 2007-2009 Matthias Schwarzott <zzam@gentoo.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License Version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef DVB_ZL10036_H
-#define DVB_ZL10036_H
-
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-
-/**
- * Attach a zl10036 tuner to the supplied frontend structure.
- *
- * @param fe Frontend to attach to.
- * @param config zl10036_config structure
- * @return FE pointer on success, NULL on failure.
- */
-
-struct zl10036_config {
-	u8 tuner_address;
-	int rf_loop_enable;
-};
-
-#if defined(CONFIG_DVB_ZL10036) || \
-	(defined(CONFIG_DVB_ZL10036_MODULE) && defined(MODULE))
-extern struct dvb_frontend *zl10036_attach(struct dvb_frontend *fe,
-	const struct zl10036_config *config, struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *zl10036_attach(struct dvb_frontend *fe,
-	const struct zl10036_config *config, struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif
-
-#endif /* DVB_ZL10036_H */
diff --git a/drivers/media/dvb/frontends/zl10039.c b/drivers/media/dvb/frontends/zl10039.c
deleted file mode 100644
index eff9c5f..0000000
--- a/drivers/media/dvb/frontends/zl10039.c
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- *  Driver for Zarlink ZL10039 DVB-S tuner
- *
- *  Copyright 2007 Jan D. Louw <jd.louw@mweb.co.za>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/dvb/frontend.h>
-
-#include "dvb_frontend.h"
-#include "zl10039.h"
-
-static int debug;
-
-#define dprintk(args...) \
-	do { \
-		if (debug) \
-			printk(KERN_DEBUG args); \
-	} while (0)
-
-enum zl10039_model_id {
-	ID_ZL10039 = 1
-};
-
-struct zl10039_state {
-	struct i2c_adapter *i2c;
-	u8 i2c_addr;
-	u8 id;
-};
-
-enum zl10039_reg_addr {
-	PLL0 = 0,
-	PLL1,
-	PLL2,
-	PLL3,
-	RFFE,
-	BASE0,
-	BASE1,
-	BASE2,
-	LO0,
-	LO1,
-	LO2,
-	LO3,
-	LO4,
-	LO5,
-	LO6,
-	GENERAL
-};
-
-static int zl10039_read(const struct zl10039_state *state,
-			const enum zl10039_reg_addr reg, u8 *buf,
-			const size_t count)
-{
-	u8 regbuf[] = { reg };
-	struct i2c_msg msg[] = {
-		{/* Write register address */
-			.addr = state->i2c_addr,
-			.flags = 0,
-			.buf = regbuf,
-			.len = 1,
-		}, {/* Read count bytes */
-			.addr = state->i2c_addr,
-			.flags = I2C_M_RD,
-			.buf = buf,
-			.len = count,
-		},
-	};
-
-	dprintk("%s\n", __func__);
-
-	if (i2c_transfer(state->i2c, msg, 2) != 2) {
-		dprintk("%s: i2c read error\n", __func__);
-		return -EREMOTEIO;
-	}
-
-	return 0; /* Success */
-}
-
-static int zl10039_write(struct zl10039_state *state,
-			const enum zl10039_reg_addr reg, const u8 *src,
-			const size_t count)
-{
-	u8 buf[count + 1];
-	struct i2c_msg msg = {
-		.addr = state->i2c_addr,
-		.flags = 0,
-		.buf = buf,
-		.len = count + 1,
-	};
-
-	dprintk("%s\n", __func__);
-	/* Write register address and data in one go */
-	buf[0] = reg;
-	memcpy(&buf[1], src, count);
-	if (i2c_transfer(state->i2c, &msg, 1) != 1) {
-		dprintk("%s: i2c write error\n", __func__);
-		return -EREMOTEIO;
-	}
-
-	return 0; /* Success */
-}
-
-static inline int zl10039_readreg(struct zl10039_state *state,
-				const enum zl10039_reg_addr reg, u8 *val)
-{
-	return zl10039_read(state, reg, val, 1);
-}
-
-static inline int zl10039_writereg(struct zl10039_state *state,
-				const enum zl10039_reg_addr reg,
-				const u8 val)
-{
-	return zl10039_write(state, reg, &val, 1);
-}
-
-static int zl10039_init(struct dvb_frontend *fe)
-{
-	struct zl10039_state *state = fe->tuner_priv;
-	int ret;
-
-	dprintk("%s\n", __func__);
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	/* Reset logic */
-	ret = zl10039_writereg(state, GENERAL, 0x40);
-	if (ret < 0) {
-		dprintk("Note: i2c write error normal when resetting the "
-			"tuner\n");
-	}
-	/* Wake up */
-	ret = zl10039_writereg(state, GENERAL, 0x01);
-	if (ret < 0) {
-		dprintk("Tuner power up failed\n");
-		return ret;
-	}
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-
-	return 0;
-}
-
-static int zl10039_sleep(struct dvb_frontend *fe)
-{
-	struct zl10039_state *state = fe->tuner_priv;
-	int ret;
-
-	dprintk("%s\n", __func__);
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	ret = zl10039_writereg(state, GENERAL, 0x80);
-	if (ret < 0) {
-		dprintk("Tuner sleep failed\n");
-		return ret;
-	}
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-
-	return 0;
-}
-
-static int zl10039_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct zl10039_state *state = fe->tuner_priv;
-	u8 buf[6];
-	u8 bf;
-	u32 fbw;
-	u32 div;
-	int ret;
-
-	dprintk("%s\n", __func__);
-	dprintk("Set frequency = %d, symbol rate = %d\n",
-			c->frequency, c->symbol_rate);
-
-	/* Assumed 10.111 MHz crystal oscillator */
-	/* Cancelled num/den 80 to prevent overflow */
-	div = (c->frequency * 1000) / 126387;
-	fbw = (c->symbol_rate * 27) / 32000;
-	/* Cancelled num/den 10 to prevent overflow */
-	bf = ((fbw * 5088) / 1011100) - 1;
-
-	/*PLL divider*/
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = (div >> 0) & 0xff;
-	/*Reference divider*/
-	/* Select reference ratio of 80 */
-	buf[2] = 0x1D;
-	/*PLL test modes*/
-	buf[3] = 0x40;
-	/*RF Control register*/
-	buf[4] = 0x6E; /* Bypass enable */
-	/*Baseband filter cutoff */
-	buf[5] = bf;
-
-	/* Open i2c gate */
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	/* BR = 10, Enable filter adjustment */
-	ret = zl10039_writereg(state, BASE1, 0x0A);
-	if (ret < 0)
-		goto error;
-	/* Write new config values */
-	ret = zl10039_write(state, PLL0, buf, sizeof(buf));
-	if (ret < 0)
-		goto error;
-	/* BR = 10, Disable filter adjustment */
-	ret = zl10039_writereg(state, BASE1, 0x6A);
-	if (ret < 0)
-		goto error;
-
-	/* Close i2c gate */
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-	return 0;
-error:
-	dprintk("Error setting tuner\n");
-	return ret;
-}
-
-static int zl10039_release(struct dvb_frontend *fe)
-{
-	struct zl10039_state *state = fe->tuner_priv;
-
-	dprintk("%s\n", __func__);
-	kfree(state);
-	fe->tuner_priv = NULL;
-	return 0;
-}
-
-static struct dvb_tuner_ops zl10039_ops = {
-	.release = zl10039_release,
-	.init = zl10039_init,
-	.sleep = zl10039_sleep,
-	.set_params = zl10039_set_params,
-};
-
-struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe,
-		u8 i2c_addr, struct i2c_adapter *i2c)
-{
-	struct zl10039_state *state = NULL;
-
-	dprintk("%s\n", __func__);
-	state = kmalloc(sizeof(struct zl10039_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	state->i2c = i2c;
-	state->i2c_addr = i2c_addr;
-
-	/* Open i2c gate */
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	/* check if this is a valid tuner */
-	if (zl10039_readreg(state, GENERAL, &state->id) < 0) {
-		/* Close i2c gate */
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 0);
-		goto error;
-	}
-	/* Close i2c gate */
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-
-	state->id = state->id & 0x0f;
-	switch (state->id) {
-	case ID_ZL10039:
-		strcpy(fe->ops.tuner_ops.info.name,
-			"Zarlink ZL10039 DVB-S tuner");
-		break;
-	default:
-		dprintk("Chip ID=%x does not match a known type\n", state->id);
-		goto error;
-	}
-
-	memcpy(&fe->ops.tuner_ops, &zl10039_ops, sizeof(struct dvb_tuner_ops));
-	fe->tuner_priv = state;
-	dprintk("Tuner attached @ i2c address 0x%02x\n", i2c_addr);
-	return fe;
-error:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(zl10039_attach);
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-MODULE_DESCRIPTION("Zarlink ZL10039 DVB-S tuner driver");
-MODULE_AUTHOR("Jan D. Louw <jd.louw@mweb.co.za>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/zl10039.h b/drivers/media/dvb/frontends/zl10039.h
deleted file mode 100644
index 5eee7ea..0000000
--- a/drivers/media/dvb/frontends/zl10039.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
-    Driver for Zarlink ZL10039 DVB-S tuner
-
-    Copyright (C) 2007 Jan D. Louw <jd.louw@mweb.co.za>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef ZL10039_H
-#define ZL10039_H
-
-#if defined(CONFIG_DVB_ZL10039) || (defined(CONFIG_DVB_ZL10039_MODULE) \
-	    && defined(MODULE))
-struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe,
-					u8 i2c_addr,
-					struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe,
-					u8 i2c_addr,
-					struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_ZL10039 */
-
-#endif /* ZL10039_H */
diff --git a/drivers/media/dvb/frontends/zl10353.c b/drivers/media/dvb/frontends/zl10353.c
deleted file mode 100644
index 82946cd..0000000
--- a/drivers/media/dvb/frontends/zl10353.c
+++ /dev/null
@@ -1,684 +0,0 @@
-/*
- * Driver for Zarlink DVB-T ZL10353 demodulator
- *
- * Copyright (C) 2006, 2007 Christopher Pascoe <c.pascoe@itee.uq.edu.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <asm/div64.h>
-
-#include "dvb_frontend.h"
-#include "zl10353_priv.h"
-#include "zl10353.h"
-
-struct zl10353_state {
-	struct i2c_adapter *i2c;
-	struct dvb_frontend frontend;
-
-	struct zl10353_config config;
-
-	u32 bandwidth;
-	u32 ucblocks;
-	u32 frequency;
-};
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "zl10353: " args); \
-	} while (0)
-
-static int debug_regs;
-
-static int zl10353_single_write(struct dvb_frontend *fe, u8 reg, u8 val)
-{
-	struct zl10353_state *state = fe->demodulator_priv;
-	u8 buf[2] = { reg, val };
-	struct i2c_msg msg = { .addr = state->config.demod_address, .flags = 0,
-			       .buf = buf, .len = 2 };
-	int err = i2c_transfer(state->i2c, &msg, 1);
-	if (err != 1) {
-		printk("zl10353: write to reg %x failed (err = %d)!\n", reg, err);
-		return err;
-	}
-	return 0;
-}
-
-static int zl10353_write(struct dvb_frontend *fe, const u8 ibuf[], int ilen)
-{
-	int err, i;
-	for (i = 0; i < ilen - 1; i++)
-		if ((err = zl10353_single_write(fe, ibuf[0] + i, ibuf[i + 1])))
-			return err;
-
-	return 0;
-}
-
-static int zl10353_read_register(struct zl10353_state *state, u8 reg)
-{
-	int ret;
-	u8 b0[1] = { reg };
-	u8 b1[1] = { 0 };
-	struct i2c_msg msg[2] = { { .addr = state->config.demod_address,
-				    .flags = 0,
-				    .buf = b0, .len = 1 },
-				  { .addr = state->config.demod_address,
-				    .flags = I2C_M_RD,
-				    .buf = b1, .len = 1 } };
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2) {
-		printk("%s: readreg error (reg=%d, ret==%i)\n",
-		       __func__, reg, ret);
-		return ret;
-	}
-
-	return b1[0];
-}
-
-static void zl10353_dump_regs(struct dvb_frontend *fe)
-{
-	struct zl10353_state *state = fe->demodulator_priv;
-	int ret;
-	u8 reg;
-
-	/* Dump all registers. */
-	for (reg = 0; ; reg++) {
-		if (reg % 16 == 0) {
-			if (reg)
-				printk(KERN_CONT "\n");
-			printk(KERN_DEBUG "%02x:", reg);
-		}
-		ret = zl10353_read_register(state, reg);
-		if (ret >= 0)
-			printk(KERN_CONT " %02x", (u8)ret);
-		else
-			printk(KERN_CONT " --");
-		if (reg == 0xff)
-			break;
-	}
-	printk(KERN_CONT "\n");
-}
-
-static void zl10353_calc_nominal_rate(struct dvb_frontend *fe,
-				      u32 bandwidth,
-				      u16 *nominal_rate)
-{
-	struct zl10353_state *state = fe->demodulator_priv;
-	u32 adc_clock = 450560; /* 45.056 MHz */
-	u64 value;
-	u8 bw = bandwidth / 1000000;
-
-	if (state->config.adc_clock)
-		adc_clock = state->config.adc_clock;
-
-	value = (u64)10 * (1 << 23) / 7 * 125;
-	value = (bw * value) + adc_clock / 2;
-	do_div(value, adc_clock);
-	*nominal_rate = value;
-
-	dprintk("%s: bw %d, adc_clock %d => 0x%x\n",
-		__func__, bw, adc_clock, *nominal_rate);
-}
-
-static void zl10353_calc_input_freq(struct dvb_frontend *fe,
-				    u16 *input_freq)
-{
-	struct zl10353_state *state = fe->demodulator_priv;
-	u32 adc_clock = 450560;	/* 45.056  MHz */
-	int if2 = 361667;	/* 36.1667 MHz */
-	int ife;
-	u64 value;
-
-	if (state->config.adc_clock)
-		adc_clock = state->config.adc_clock;
-	if (state->config.if2)
-		if2 = state->config.if2;
-
-	if (adc_clock >= if2 * 2)
-		ife = if2;
-	else {
-		ife = adc_clock - (if2 % adc_clock);
-		if (ife > adc_clock / 2)
-			ife = adc_clock - ife;
-	}
-	value = (u64)65536 * ife + adc_clock / 2;
-	do_div(value, adc_clock);
-	*input_freq = -value;
-
-	dprintk("%s: if2 %d, ife %d, adc_clock %d => %d / 0x%x\n",
-		__func__, if2, ife, adc_clock, -(int)value, *input_freq);
-}
-
-static int zl10353_sleep(struct dvb_frontend *fe)
-{
-	static u8 zl10353_softdown[] = { 0x50, 0x0C, 0x44 };
-
-	zl10353_write(fe, zl10353_softdown, sizeof(zl10353_softdown));
-	return 0;
-}
-
-static int zl10353_set_parameters(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct zl10353_state *state = fe->demodulator_priv;
-	u16 nominal_rate, input_freq;
-	u8 pllbuf[6] = { 0x67 }, acq_ctl = 0;
-	u16 tps = 0;
-
-	state->frequency = c->frequency;
-
-	zl10353_single_write(fe, RESET, 0x80);
-	udelay(200);
-	zl10353_single_write(fe, 0xEA, 0x01);
-	udelay(200);
-	zl10353_single_write(fe, 0xEA, 0x00);
-
-	zl10353_single_write(fe, AGC_TARGET, 0x28);
-
-	if (c->transmission_mode != TRANSMISSION_MODE_AUTO)
-		acq_ctl |= (1 << 0);
-	if (c->guard_interval != GUARD_INTERVAL_AUTO)
-		acq_ctl |= (1 << 1);
-	zl10353_single_write(fe, ACQ_CTL, acq_ctl);
-
-	switch (c->bandwidth_hz) {
-	case 6000000:
-		/* These are extrapolated from the 7 and 8MHz values */
-		zl10353_single_write(fe, MCLK_RATIO, 0x97);
-		zl10353_single_write(fe, 0x64, 0x34);
-		zl10353_single_write(fe, 0xcc, 0xdd);
-		break;
-	case 7000000:
-		zl10353_single_write(fe, MCLK_RATIO, 0x86);
-		zl10353_single_write(fe, 0x64, 0x35);
-		zl10353_single_write(fe, 0xcc, 0x73);
-		break;
-	default:
-		c->bandwidth_hz = 8000000;
-		/* fall though */
-	case 8000000:
-		zl10353_single_write(fe, MCLK_RATIO, 0x75);
-		zl10353_single_write(fe, 0x64, 0x36);
-		zl10353_single_write(fe, 0xcc, 0x73);
-	}
-
-	zl10353_calc_nominal_rate(fe, c->bandwidth_hz, &nominal_rate);
-	zl10353_single_write(fe, TRL_NOMINAL_RATE_1, msb(nominal_rate));
-	zl10353_single_write(fe, TRL_NOMINAL_RATE_0, lsb(nominal_rate));
-	state->bandwidth = c->bandwidth_hz;
-
-	zl10353_calc_input_freq(fe, &input_freq);
-	zl10353_single_write(fe, INPUT_FREQ_1, msb(input_freq));
-	zl10353_single_write(fe, INPUT_FREQ_0, lsb(input_freq));
-
-	/* Hint at TPS settings */
-	switch (c->code_rate_HP) {
-	case FEC_2_3:
-		tps |= (1 << 7);
-		break;
-	case FEC_3_4:
-		tps |= (2 << 7);
-		break;
-	case FEC_5_6:
-		tps |= (3 << 7);
-		break;
-	case FEC_7_8:
-		tps |= (4 << 7);
-		break;
-	case FEC_1_2:
-	case FEC_AUTO:
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	switch (c->code_rate_LP) {
-	case FEC_2_3:
-		tps |= (1 << 4);
-		break;
-	case FEC_3_4:
-		tps |= (2 << 4);
-		break;
-	case FEC_5_6:
-		tps |= (3 << 4);
-		break;
-	case FEC_7_8:
-		tps |= (4 << 4);
-		break;
-	case FEC_1_2:
-	case FEC_AUTO:
-		break;
-	case FEC_NONE:
-		if (c->hierarchy == HIERARCHY_AUTO ||
-		    c->hierarchy == HIERARCHY_NONE)
-			break;
-	default:
-		return -EINVAL;
-	}
-
-	switch (c->modulation) {
-	case QPSK:
-		break;
-	case QAM_AUTO:
-	case QAM_16:
-		tps |= (1 << 13);
-		break;
-	case QAM_64:
-		tps |= (2 << 13);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	switch (c->transmission_mode) {
-	case TRANSMISSION_MODE_2K:
-	case TRANSMISSION_MODE_AUTO:
-		break;
-	case TRANSMISSION_MODE_8K:
-		tps |= (1 << 0);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	switch (c->guard_interval) {
-	case GUARD_INTERVAL_1_32:
-	case GUARD_INTERVAL_AUTO:
-		break;
-	case GUARD_INTERVAL_1_16:
-		tps |= (1 << 2);
-		break;
-	case GUARD_INTERVAL_1_8:
-		tps |= (2 << 2);
-		break;
-	case GUARD_INTERVAL_1_4:
-		tps |= (3 << 2);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	switch (c->hierarchy) {
-	case HIERARCHY_AUTO:
-	case HIERARCHY_NONE:
-		break;
-	case HIERARCHY_1:
-		tps |= (1 << 10);
-		break;
-	case HIERARCHY_2:
-		tps |= (2 << 10);
-		break;
-	case HIERARCHY_4:
-		tps |= (3 << 10);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	zl10353_single_write(fe, TPS_GIVEN_1, msb(tps));
-	zl10353_single_write(fe, TPS_GIVEN_0, lsb(tps));
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-
-	/*
-	 * If there is no tuner attached to the secondary I2C bus, we call
-	 * set_params to program a potential tuner attached somewhere else.
-	 * Otherwise, we update the PLL registers via calc_regs.
-	 */
-	if (state->config.no_tuner) {
-		if (fe->ops.tuner_ops.set_params) {
-			fe->ops.tuner_ops.set_params(fe);
-			if (fe->ops.i2c_gate_ctrl)
-				fe->ops.i2c_gate_ctrl(fe, 0);
-		}
-	} else if (fe->ops.tuner_ops.calc_regs) {
-		fe->ops.tuner_ops.calc_regs(fe, pllbuf + 1, 5);
-		pllbuf[1] <<= 1;
-		zl10353_write(fe, pllbuf, sizeof(pllbuf));
-	}
-
-	zl10353_single_write(fe, 0x5F, 0x13);
-
-	/* If no attached tuner or invalid PLL registers, just start the FSM. */
-	if (state->config.no_tuner || fe->ops.tuner_ops.calc_regs == NULL)
-		zl10353_single_write(fe, FSM_GO, 0x01);
-	else
-		zl10353_single_write(fe, TUNER_GO, 0x01);
-
-	return 0;
-}
-
-static int zl10353_get_parameters(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct zl10353_state *state = fe->demodulator_priv;
-	int s6, s9;
-	u16 tps;
-	static const u8 tps_fec_to_api[8] = {
-		FEC_1_2,
-		FEC_2_3,
-		FEC_3_4,
-		FEC_5_6,
-		FEC_7_8,
-		FEC_AUTO,
-		FEC_AUTO,
-		FEC_AUTO
-	};
-
-	s6 = zl10353_read_register(state, STATUS_6);
-	s9 = zl10353_read_register(state, STATUS_9);
-	if (s6 < 0 || s9 < 0)
-		return -EREMOTEIO;
-	if ((s6 & (1 << 5)) == 0 || (s9 & (1 << 4)) == 0)
-		return -EINVAL;	/* no FE or TPS lock */
-
-	tps = zl10353_read_register(state, TPS_RECEIVED_1) << 8 |
-	      zl10353_read_register(state, TPS_RECEIVED_0);
-
-	c->code_rate_HP = tps_fec_to_api[(tps >> 7) & 7];
-	c->code_rate_LP = tps_fec_to_api[(tps >> 4) & 7];
-
-	switch ((tps >> 13) & 3) {
-	case 0:
-		c->modulation = QPSK;
-		break;
-	case 1:
-		c->modulation = QAM_16;
-		break;
-	case 2:
-		c->modulation = QAM_64;
-		break;
-	default:
-		c->modulation = QAM_AUTO;
-		break;
-	}
-
-	c->transmission_mode = (tps & 0x01) ? TRANSMISSION_MODE_8K :
-					       TRANSMISSION_MODE_2K;
-
-	switch ((tps >> 2) & 3) {
-	case 0:
-		c->guard_interval = GUARD_INTERVAL_1_32;
-		break;
-	case 1:
-		c->guard_interval = GUARD_INTERVAL_1_16;
-		break;
-	case 2:
-		c->guard_interval = GUARD_INTERVAL_1_8;
-		break;
-	case 3:
-		c->guard_interval = GUARD_INTERVAL_1_4;
-		break;
-	default:
-		c->guard_interval = GUARD_INTERVAL_AUTO;
-		break;
-	}
-
-	switch ((tps >> 10) & 7) {
-	case 0:
-		c->hierarchy = HIERARCHY_NONE;
-		break;
-	case 1:
-		c->hierarchy = HIERARCHY_1;
-		break;
-	case 2:
-		c->hierarchy = HIERARCHY_2;
-		break;
-	case 3:
-		c->hierarchy = HIERARCHY_4;
-		break;
-	default:
-		c->hierarchy = HIERARCHY_AUTO;
-		break;
-	}
-
-	c->frequency = state->frequency;
-	c->bandwidth_hz = state->bandwidth;
-	c->inversion = INVERSION_AUTO;
-
-	return 0;
-}
-
-static int zl10353_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct zl10353_state *state = fe->demodulator_priv;
-	int s6, s7, s8;
-
-	if ((s6 = zl10353_read_register(state, STATUS_6)) < 0)
-		return -EREMOTEIO;
-	if ((s7 = zl10353_read_register(state, STATUS_7)) < 0)
-		return -EREMOTEIO;
-	if ((s8 = zl10353_read_register(state, STATUS_8)) < 0)
-		return -EREMOTEIO;
-
-	*status = 0;
-	if (s6 & (1 << 2))
-		*status |= FE_HAS_CARRIER;
-	if (s6 & (1 << 1))
-		*status |= FE_HAS_VITERBI;
-	if (s6 & (1 << 5))
-		*status |= FE_HAS_LOCK;
-	if (s7 & (1 << 4))
-		*status |= FE_HAS_SYNC;
-	if (s8 & (1 << 6))
-		*status |= FE_HAS_SIGNAL;
-
-	if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) !=
-	    (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC))
-		*status &= ~FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int zl10353_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	struct zl10353_state *state = fe->demodulator_priv;
-
-	*ber = zl10353_read_register(state, RS_ERR_CNT_2) << 16 |
-	       zl10353_read_register(state, RS_ERR_CNT_1) << 8 |
-	       zl10353_read_register(state, RS_ERR_CNT_0);
-
-	return 0;
-}
-
-static int zl10353_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	struct zl10353_state *state = fe->demodulator_priv;
-
-	u16 signal = zl10353_read_register(state, AGC_GAIN_1) << 10 |
-		     zl10353_read_register(state, AGC_GAIN_0) << 2 | 3;
-
-	*strength = ~signal;
-
-	return 0;
-}
-
-static int zl10353_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct zl10353_state *state = fe->demodulator_priv;
-	u8 _snr;
-
-	if (debug_regs)
-		zl10353_dump_regs(fe);
-
-	_snr = zl10353_read_register(state, SNR);
-	*snr = 10 * _snr / 8;
-
-	return 0;
-}
-
-static int zl10353_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	struct zl10353_state *state = fe->demodulator_priv;
-       u32 ubl = 0;
-
-       ubl = zl10353_read_register(state, RS_UBC_1) << 8 |
-	     zl10353_read_register(state, RS_UBC_0);
-
-       state->ucblocks += ubl;
-       *ucblocks = state->ucblocks;
-
-	return 0;
-}
-
-static int zl10353_get_tune_settings(struct dvb_frontend *fe,
-				     struct dvb_frontend_tune_settings
-					 *fe_tune_settings)
-{
-	fe_tune_settings->min_delay_ms = 1000;
-	fe_tune_settings->step_size = 0;
-	fe_tune_settings->max_drift = 0;
-
-	return 0;
-}
-
-static int zl10353_init(struct dvb_frontend *fe)
-{
-	struct zl10353_state *state = fe->demodulator_priv;
-	u8 zl10353_reset_attach[6] = { 0x50, 0x03, 0x64, 0x46, 0x15, 0x0F };
-
-	if (debug_regs)
-		zl10353_dump_regs(fe);
-	if (state->config.parallel_ts)
-		zl10353_reset_attach[2] &= ~0x20;
-	if (state->config.clock_ctl_1)
-		zl10353_reset_attach[3] = state->config.clock_ctl_1;
-	if (state->config.pll_0)
-		zl10353_reset_attach[4] = state->config.pll_0;
-
-	/* Do a "hard" reset if not already done */
-	if (zl10353_read_register(state, 0x50) != zl10353_reset_attach[1] ||
-	    zl10353_read_register(state, 0x51) != zl10353_reset_attach[2]) {
-		zl10353_write(fe, zl10353_reset_attach,
-				   sizeof(zl10353_reset_attach));
-		if (debug_regs)
-			zl10353_dump_regs(fe);
-	}
-
-	return 0;
-}
-
-static int zl10353_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
-{
-	struct zl10353_state *state = fe->demodulator_priv;
-	u8 val = 0x0a;
-
-	if (state->config.disable_i2c_gate_ctrl) {
-		/* No tuner attached to the internal I2C bus */
-		/* If set enable I2C bridge, the main I2C bus stopped hardly */
-		return 0;
-	}
-
-	if (enable)
-		val |= 0x10;
-
-	return zl10353_single_write(fe, 0x62, val);
-}
-
-static void zl10353_release(struct dvb_frontend *fe)
-{
-	struct zl10353_state *state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops zl10353_ops;
-
-struct dvb_frontend *zl10353_attach(const struct zl10353_config *config,
-				    struct i2c_adapter *i2c)
-{
-	struct zl10353_state *state = NULL;
-	int id;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct zl10353_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->i2c = i2c;
-	memcpy(&state->config, config, sizeof(struct zl10353_config));
-
-	/* check if the demod is there */
-	id = zl10353_read_register(state, CHIP_ID);
-	if ((id != ID_ZL10353) && (id != ID_CE6230) && (id != ID_CE6231))
-		goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &zl10353_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-
-	return &state->frontend;
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops zl10353_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name			= "Zarlink ZL10353 DVB-T",
-		.frequency_min		= 174000000,
-		.frequency_max		= 862000000,
-		.frequency_stepsize	= 166667,
-		.frequency_tolerance	= 0,
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
-			FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
-			FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
-			FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER |
-			FE_CAN_MUTE_TS
-	},
-
-	.release = zl10353_release,
-
-	.init = zl10353_init,
-	.sleep = zl10353_sleep,
-	.i2c_gate_ctrl = zl10353_i2c_gate_ctrl,
-	.write = zl10353_write,
-
-	.set_frontend = zl10353_set_parameters,
-	.get_frontend = zl10353_get_parameters,
-	.get_tune_settings = zl10353_get_tune_settings,
-
-	.read_status = zl10353_read_status,
-	.read_ber = zl10353_read_ber,
-	.read_signal_strength = zl10353_read_signal_strength,
-	.read_snr = zl10353_read_snr,
-	.read_ucblocks = zl10353_read_ucblocks,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-module_param(debug_regs, int, 0644);
-MODULE_PARM_DESC(debug_regs, "Turn on/off frontend register dumps (default:off).");
-
-MODULE_DESCRIPTION("Zarlink ZL10353 DVB-T demodulator driver");
-MODULE_AUTHOR("Chris Pascoe");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(zl10353_attach);
diff --git a/drivers/media/dvb/frontends/zl10353.h b/drivers/media/dvb/frontends/zl10353.h
deleted file mode 100644
index 6e3ca9e..0000000
--- a/drivers/media/dvb/frontends/zl10353.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- *  Driver for Zarlink DVB-T ZL10353 demodulator
- *
- *  Copyright (C) 2006, 2007 Christopher Pascoe <c.pascoe@itee.uq.edu.au>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
- */
-
-#ifndef ZL10353_H
-#define ZL10353_H
-
-#include <linux/dvb/frontend.h>
-
-struct zl10353_config
-{
-	/* demodulator's I2C address */
-	u8 demod_address;
-
-	/* frequencies in units of 0.1kHz */
-	int adc_clock;	/* default: 450560 (45.056  MHz) */
-	int if2;	/* default: 361667 (36.1667 MHz) */
-
-	/* set if no pll is connected to the secondary i2c bus */
-	int no_tuner;
-
-	/* set if parallel ts output is required */
-	int parallel_ts;
-
-	/* set if i2c_gate_ctrl disable is required */
-	u8 disable_i2c_gate_ctrl:1;
-
-	/* clock control registers (0x51-0x54) */
-	u8 clock_ctl_1;  /* default: 0x46 */
-	u8 pll_0;        /* default: 0x15 */
-};
-
-#if defined(CONFIG_DVB_ZL10353) || (defined(CONFIG_DVB_ZL10353_MODULE) && defined(MODULE))
-extern struct dvb_frontend* zl10353_attach(const struct zl10353_config *config,
-					   struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend* zl10353_attach(const struct zl10353_config *config,
-					   struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_ZL10353 */
-
-#endif /* ZL10353_H */
diff --git a/drivers/media/dvb/frontends/zl10353_priv.h b/drivers/media/dvb/frontends/zl10353_priv.h
deleted file mode 100644
index e0dd1d3..0000000
--- a/drivers/media/dvb/frontends/zl10353_priv.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- *  Driver for Zarlink DVB-T ZL10353 demodulator
- *
- *  Copyright (C) 2006, 2007 Christopher Pascoe <c.pascoe@itee.uq.edu.au>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ZL10353_PRIV_
-#define _ZL10353_PRIV_
-
-#define ID_ZL10353	0x14 /* Zarlink ZL10353 */
-#define ID_CE6230	0x18 /* Intel CE6230 */
-#define ID_CE6231	0x19 /* Intel CE6231 */
-
-#define msb(x) (((x) >> 8) & 0xff)
-#define lsb(x) ((x) & 0xff)
-
-enum zl10353_reg_addr {
-	INTERRUPT_0        = 0x00,
-	INTERRUPT_1        = 0x01,
-	INTERRUPT_2        = 0x02,
-	INTERRUPT_3        = 0x03,
-	INTERRUPT_4        = 0x04,
-	INTERRUPT_5        = 0x05,
-	STATUS_6           = 0x06,
-	STATUS_7           = 0x07,
-	STATUS_8           = 0x08,
-	STATUS_9           = 0x09,
-	AGC_GAIN_1         = 0x0A,
-	AGC_GAIN_0         = 0x0B,
-	SNR                = 0x10,
-	RS_ERR_CNT_2       = 0x11,
-	RS_ERR_CNT_1       = 0x12,
-	RS_ERR_CNT_0       = 0x13,
-	RS_UBC_1           = 0x14,
-	RS_UBC_0           = 0x15,
-	TPS_RECEIVED_1     = 0x1D,
-	TPS_RECEIVED_0     = 0x1E,
-	TPS_CURRENT_1      = 0x1F,
-	TPS_CURRENT_0      = 0x20,
-	CLOCK_CTL_0        = 0x51,
-	CLOCK_CTL_1        = 0x52,
-	PLL_0              = 0x53,
-	PLL_1              = 0x54,
-	RESET              = 0x55,
-	AGC_TARGET         = 0x56,
-	MCLK_RATIO         = 0x5C,
-	ACQ_CTL            = 0x5E,
-	TRL_NOMINAL_RATE_1 = 0x65,
-	TRL_NOMINAL_RATE_0 = 0x66,
-	INPUT_FREQ_1       = 0x6C,
-	INPUT_FREQ_0       = 0x6D,
-	TPS_GIVEN_1        = 0x6E,
-	TPS_GIVEN_0        = 0x6F,
-	TUNER_GO           = 0x70,
-	FSM_GO             = 0x71,
-	CHIP_ID            = 0x7F,
-	CHAN_STEP_1        = 0xE4,
-	CHAN_STEP_0        = 0xE5,
-	OFDM_LOCK_TIME     = 0xE7,
-	FEC_LOCK_TIME      = 0xE8,
-	ACQ_DELAY          = 0xE9,
-};
-
-#endif                          /* _ZL10353_PRIV_ */
diff --git a/drivers/media/dvb/mantis/Kconfig b/drivers/media/dvb/mantis/Kconfig
deleted file mode 100644
index a13a505..0000000
--- a/drivers/media/dvb/mantis/Kconfig
+++ /dev/null
@@ -1,38 +0,0 @@
-config MANTIS_CORE
-	tristate "Mantis/Hopper PCI bridge based devices"
-	depends on PCI && I2C && INPUT && RC_CORE
-
-	help
-	  Support for PCI cards based on the Mantis and Hopper PCi bridge.
-
-	  Say Y if you own such a device and want to use it.
-
-config DVB_MANTIS
-	tristate "MANTIS based cards"
-	depends on MANTIS_CORE && DVB_CORE && PCI && I2C
-	select DVB_MB86A16 if !DVB_FE_CUSTOMISE
-	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
-	select DVB_STB0899 if !DVB_FE_CUSTOMISE
-	select DVB_STB6100 if !DVB_FE_CUSTOMISE
-	select DVB_TDA665x if !DVB_FE_CUSTOMISE
-	select DVB_TDA10021 if !DVB_FE_CUSTOMISE
-	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
-	select DVB_PLL
-	help
-	  Support for PCI cards based on the Mantis PCI bridge.
-	  Say Y when you have a Mantis based DVB card and want to use it.
-
-	  If unsure say N.
-
-config DVB_HOPPER
-	tristate "HOPPER based cards"
-	depends on MANTIS_CORE && DVB_CORE && PCI && I2C
-	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select DVB_PLL
-	help
-	  Support for PCI cards based on the Hopper  PCI bridge.
-	  Say Y when you have a Hopper based DVB card and want to use it.
-
-	  If unsure say N
diff --git a/drivers/media/dvb/mantis/Makefile b/drivers/media/dvb/mantis/Makefile
deleted file mode 100644
index ec8116d..0000000
--- a/drivers/media/dvb/mantis/Makefile
+++ /dev/null
@@ -1,28 +0,0 @@
-mantis_core-objs :=	mantis_ioc.o	\
-			mantis_uart.o	\
-			mantis_dma.o	\
-			mantis_pci.o	\
-			mantis_i2c.o	\
-			mantis_dvb.o	\
-			mantis_evm.o	\
-			mantis_hif.o	\
-			mantis_ca.o	\
-			mantis_pcmcia.o	\
-			mantis_input.o
-
-mantis-objs	:=	mantis_cards.o	\
-			mantis_vp1033.o	\
-			mantis_vp1034.o	\
-			mantis_vp1041.o	\
-			mantis_vp2033.o	\
-			mantis_vp2040.o	\
-			mantis_vp3030.o
-
-hopper-objs	:=	hopper_cards.o	\
-			hopper_vp3028.o
-
-obj-$(CONFIG_MANTIS_CORE)	+= mantis_core.o
-obj-$(CONFIG_DVB_MANTIS)	+= mantis.o
-obj-$(CONFIG_DVB_HOPPER)	+= hopper.o
-
-ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff --git a/drivers/media/dvb/mantis/hopper_cards.c b/drivers/media/dvb/mantis/hopper_cards.c
deleted file mode 100644
index cc0251e..0000000
--- a/drivers/media/dvb/mantis/hopper_cards.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
-	Hopper PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <asm/irq.h>
-#include <linux/interrupt.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "mantis_common.h"
-#include "hopper_vp3028.h"
-#include "mantis_dma.h"
-#include "mantis_dvb.h"
-#include "mantis_uart.h"
-#include "mantis_ioc.h"
-#include "mantis_pci.h"
-#include "mantis_i2c.h"
-#include "mantis_reg.h"
-
-static unsigned int verbose;
-module_param(verbose, int, 0644);
-MODULE_PARM_DESC(verbose, "verbose startup messages, default is 0 (no)");
-
-#define DRIVER_NAME	"Hopper"
-
-static char *label[10] = {
-	"DMA",
-	"IRQ-0",
-	"IRQ-1",
-	"OCERR",
-	"PABRT",
-	"RIPRR",
-	"PPERR",
-	"FTRGT",
-	"RISCI",
-	"RACK"
-};
-
-static int devs;
-
-static irqreturn_t hopper_irq_handler(int irq, void *dev_id)
-{
-	u32 stat = 0, mask = 0;
-	u32 rst_stat = 0, rst_mask = 0;
-
-	struct mantis_pci *mantis;
-	struct mantis_ca *ca;
-
-	mantis = (struct mantis_pci *) dev_id;
-	if (unlikely(mantis == NULL)) {
-		dprintk(MANTIS_ERROR, 1, "Mantis == NULL");
-		return IRQ_NONE;
-	}
-	ca = mantis->mantis_ca;
-
-	stat = mmread(MANTIS_INT_STAT);
-	mask = mmread(MANTIS_INT_MASK);
-	if (!(stat & mask))
-		return IRQ_NONE;
-
-	rst_mask  = MANTIS_GPIF_WRACK  |
-		    MANTIS_GPIF_OTHERR |
-		    MANTIS_SBUF_WSTO   |
-		    MANTIS_GPIF_EXTIRQ;
-
-	rst_stat  = mmread(MANTIS_GPIF_STATUS);
-	rst_stat &= rst_mask;
-	mmwrite(rst_stat, MANTIS_GPIF_STATUS);
-
-	mantis->mantis_int_stat = stat;
-	mantis->mantis_int_mask = mask;
-	dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask);
-	if (stat & MANTIS_INT_RISCEN) {
-		dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]);
-	}
-	if (stat & MANTIS_INT_IRQ0) {
-		dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]);
-		mantis->gpif_status = rst_stat;
-		wake_up(&ca->hif_write_wq);
-		schedule_work(&ca->hif_evm_work);
-	}
-	if (stat & MANTIS_INT_IRQ1) {
-		dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
-		schedule_work(&mantis->uart_work);
-	}
-	if (stat & MANTIS_INT_OCERR) {
-		dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
-	}
-	if (stat & MANTIS_INT_PABORT) {
-		dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]);
-	}
-	if (stat & MANTIS_INT_RIPERR) {
-		dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]);
-	}
-	if (stat & MANTIS_INT_PPERR) {
-		dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]);
-	}
-	if (stat & MANTIS_INT_FTRGT) {
-		dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]);
-	}
-	if (stat & MANTIS_INT_RISCI) {
-		dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]);
-		mantis->busy_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
-		tasklet_schedule(&mantis->tasklet);
-	}
-	if (stat & MANTIS_INT_I2CDONE) {
-		dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]);
-		wake_up(&mantis->i2c_wq);
-	}
-	mmwrite(stat, MANTIS_INT_STAT);
-	stat &= ~(MANTIS_INT_RISCEN   | MANTIS_INT_I2CDONE |
-		  MANTIS_INT_I2CRACK  | MANTIS_INT_PCMCIA7 |
-		  MANTIS_INT_PCMCIA6  | MANTIS_INT_PCMCIA5 |
-		  MANTIS_INT_PCMCIA4  | MANTIS_INT_PCMCIA3 |
-		  MANTIS_INT_PCMCIA2  | MANTIS_INT_PCMCIA1 |
-		  MANTIS_INT_PCMCIA0  | MANTIS_INT_IRQ1	   |
-		  MANTIS_INT_IRQ0     | MANTIS_INT_OCERR   |
-		  MANTIS_INT_PABORT   | MANTIS_INT_RIPERR  |
-		  MANTIS_INT_PPERR    | MANTIS_INT_FTRGT   |
-		  MANTIS_INT_RISCI);
-
-	if (stat)
-		dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask);
-
-	dprintk(MANTIS_DEBUG, 0, "\n");
-	return IRQ_HANDLED;
-}
-
-static int __devinit hopper_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
-{
-	struct mantis_pci *mantis;
-	struct mantis_hwconfig *config;
-	int err = 0;
-
-	mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL);
-	if (mantis == NULL) {
-		printk(KERN_ERR "%s ERROR: Out of memory\n", __func__);
-		err = -ENOMEM;
-		goto fail0;
-	}
-
-	mantis->num		= devs;
-	mantis->verbose		= verbose;
-	mantis->pdev		= pdev;
-	config			= (struct mantis_hwconfig *) pci_id->driver_data;
-	config->irq_handler	= &hopper_irq_handler;
-	mantis->hwconfig	= config;
-
-	err = mantis_pci_init(mantis);
-	if (err) {
-		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err);
-		goto fail1;
-	}
-
-	err = mantis_stream_control(mantis, STREAM_TO_HIF);
-	if (err < 0) {
-		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err);
-		goto fail1;
-	}
-
-	err = mantis_i2c_init(mantis);
-	if (err < 0) {
-		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err);
-		goto fail2;
-	}
-
-	err = mantis_get_mac(mantis);
-	if (err < 0) {
-		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err);
-		goto fail2;
-	}
-
-	err = mantis_dma_init(mantis);
-	if (err < 0) {
-		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err);
-		goto fail3;
-	}
-
-	err = mantis_dvb_init(mantis);
-	if (err < 0) {
-		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err);
-		goto fail4;
-	}
-	devs++;
-
-	return err;
-
-fail4:
-	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err);
-	mantis_dma_exit(mantis);
-
-fail3:
-	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err);
-	mantis_i2c_exit(mantis);
-
-fail2:
-	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err);
-	mantis_pci_exit(mantis);
-
-fail1:
-	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err);
-	kfree(mantis);
-
-fail0:
-	return err;
-}
-
-static void __devexit hopper_pci_remove(struct pci_dev *pdev)
-{
-	struct mantis_pci *mantis = pci_get_drvdata(pdev);
-
-	if (mantis) {
-		mantis_dvb_exit(mantis);
-		mantis_dma_exit(mantis);
-		mantis_i2c_exit(mantis);
-		mantis_pci_exit(mantis);
-		kfree(mantis);
-	}
-	return;
-
-}
-
-static struct pci_device_id hopper_pci_table[] = {
-	MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3028_DVB_T, &vp3028_config),
-	{ }
-};
-
-MODULE_DEVICE_TABLE(pci, hopper_pci_table);
-
-static struct pci_driver hopper_pci_driver = {
-	.name		= DRIVER_NAME,
-	.id_table	= hopper_pci_table,
-	.probe		= hopper_pci_probe,
-	.remove		= hopper_pci_remove,
-};
-
-static int __devinit hopper_init(void)
-{
-	return pci_register_driver(&hopper_pci_driver);
-}
-
-static void __devexit hopper_exit(void)
-{
-	return pci_unregister_driver(&hopper_pci_driver);
-}
-
-module_init(hopper_init);
-module_exit(hopper_exit);
-
-MODULE_DESCRIPTION("HOPPER driver");
-MODULE_AUTHOR("Manu Abraham");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/mantis/hopper_vp3028.c b/drivers/media/dvb/mantis/hopper_vp3028.c
deleted file mode 100644
index 68a29f8..0000000
--- a/drivers/media/dvb/mantis/hopper_vp3028.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
-	Hopper VP-3028 driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "zl10353.h"
-#include "mantis_common.h"
-#include "mantis_ioc.h"
-#include "mantis_dvb.h"
-#include "hopper_vp3028.h"
-
-struct zl10353_config hopper_vp3028_config = {
-	.demod_address	= 0x0f,
-};
-
-#define MANTIS_MODEL_NAME	"VP-3028"
-#define MANTIS_DEV_TYPE		"DVB-T"
-
-static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
-{
-	struct i2c_adapter *adapter	= &mantis->adapter;
-	struct mantis_hwconfig *config	= mantis->hwconfig;
-	int err = 0;
-
-	mantis_gpio_set_bits(mantis, config->reset, 0);
-	msleep(100);
-	err = mantis_frontend_power(mantis, POWER_ON);
-	msleep(100);
-	mantis_gpio_set_bits(mantis, config->reset, 1);
-
-	err = mantis_frontend_power(mantis, POWER_ON);
-	if (err == 0) {
-		msleep(250);
-		dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
-		fe = dvb_attach(zl10353_attach, &hopper_vp3028_config, adapter);
-
-		if (!fe)
-			return -1;
-	} else {
-		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
-			adapter->name,
-			err);
-
-		return -EIO;
-	}
-	dprintk(MANTIS_ERROR, 1, "Done!");
-
-	return 0;
-}
-
-struct mantis_hwconfig vp3028_config = {
-	.model_name	= MANTIS_MODEL_NAME,
-	.dev_type	= MANTIS_DEV_TYPE,
-	.ts_size	= MANTIS_TS_188,
-
-	.baud_rate	= MANTIS_BAUD_9600,
-	.parity		= MANTIS_PARITY_NONE,
-	.bytes		= 0,
-
-	.frontend_init	= vp3028_frontend_init,
-	.power		= GPIF_A00,
-	.reset		= GPIF_A03,
-};
diff --git a/drivers/media/dvb/mantis/hopper_vp3028.h b/drivers/media/dvb/mantis/hopper_vp3028.h
deleted file mode 100644
index 5723949..0000000
--- a/drivers/media/dvb/mantis/hopper_vp3028.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
-	Hopper VP-3028 driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MANTIS_VP3028_H
-#define __MANTIS_VP3028_H
-
-#include "mantis_common.h"
-
-#define MANTIS_VP_3028_DVB_T	0x0028
-
-extern struct mantis_hwconfig vp3028_config;
-
-#endif /* __MANTIS_VP3028_H */
diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c
deleted file mode 100644
index 3d70469..0000000
--- a/drivers/media/dvb/mantis/mantis_ca.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/signal.h>
-#include <linux/slab.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "mantis_common.h"
-#include "mantis_link.h"
-#include "mantis_hif.h"
-#include "mantis_reg.h"
-
-#include "mantis_ca.h"
-
-static int mantis_ca_read_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr)
-{
-	struct mantis_ca *ca = en50221->data;
-	struct mantis_pci *mantis = ca->ca_priv;
-
-	dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Read", slot);
-
-	if (slot != 0)
-		return -EINVAL;
-
-	return mantis_hif_read_mem(ca, addr);
-}
-
-static int mantis_ca_write_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr, u8 data)
-{
-	struct mantis_ca *ca = en50221->data;
-	struct mantis_pci *mantis = ca->ca_priv;
-
-	dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Write", slot);
-
-	if (slot != 0)
-		return -EINVAL;
-
-	return mantis_hif_write_mem(ca, addr, data);
-}
-
-static int mantis_ca_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr)
-{
-	struct mantis_ca *ca = en50221->data;
-	struct mantis_pci *mantis = ca->ca_priv;
-
-	dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Read", slot);
-
-	if (slot != 0)
-		return -EINVAL;
-
-	return mantis_hif_read_iom(ca, addr);
-}
-
-static int mantis_ca_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr, u8 data)
-{
-	struct mantis_ca *ca = en50221->data;
-	struct mantis_pci *mantis = ca->ca_priv;
-
-	dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Write", slot);
-
-	if (slot != 0)
-		return -EINVAL;
-
-	return mantis_hif_write_iom(ca, addr, data);
-}
-
-static int mantis_ca_slot_reset(struct dvb_ca_en50221 *en50221, int slot)
-{
-	struct mantis_ca *ca = en50221->data;
-	struct mantis_pci *mantis = ca->ca_priv;
-
-	dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot);
-	udelay(500); /* Wait.. */
-	mmwrite(0xda, MANTIS_PCMCIA_RESET); /* Leading edge assert */
-	udelay(500);
-	mmwrite(0x00, MANTIS_PCMCIA_RESET); /* Trailing edge deassert */
-	msleep(1000);
-	dvb_ca_en50221_camready_irq(&ca->en50221, 0);
-
-	return 0;
-}
-
-static int mantis_ca_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot)
-{
-	struct mantis_ca *ca = en50221->data;
-	struct mantis_pci *mantis = ca->ca_priv;
-
-	dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot shutdown", slot);
-
-	return 0;
-}
-
-static int mantis_ts_control(struct dvb_ca_en50221 *en50221, int slot)
-{
-	struct mantis_ca *ca = en50221->data;
-	struct mantis_pci *mantis = ca->ca_priv;
-
-	dprintk(MANTIS_DEBUG, 1, "Slot(%d): TS control", slot);
-/*	mantis_set_direction(mantis, 1); */ /* Enable TS through CAM */
-
-	return 0;
-}
-
-static int mantis_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open)
-{
-	struct mantis_ca *ca = en50221->data;
-	struct mantis_pci *mantis = ca->ca_priv;
-
-	dprintk(MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot);
-
-	if (ca->slot_state == MODULE_INSERTED) {
-		dprintk(MANTIS_DEBUG, 1, "CA Module present and ready");
-		return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
-	} else {
-		dprintk(MANTIS_DEBUG, 1, "CA Module not present or not ready");
-	}
-
-	return 0;
-}
-
-int mantis_ca_init(struct mantis_pci *mantis)
-{
-	struct dvb_adapter *dvb_adapter	= &mantis->dvb_adapter;
-	struct mantis_ca *ca;
-	int ca_flags = 0, result;
-
-	dprintk(MANTIS_DEBUG, 1, "Initializing Mantis CA");
-	ca = kzalloc(sizeof(struct mantis_ca), GFP_KERNEL);
-	if (!ca) {
-		dprintk(MANTIS_ERROR, 1, "Out of memory!, exiting ..");
-		result = -ENOMEM;
-		goto err;
-	}
-
-	ca->ca_priv		= mantis;
-	mantis->mantis_ca	= ca;
-	ca_flags		= DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE;
-	/* register CA interface */
-	ca->en50221.owner		= THIS_MODULE;
-	ca->en50221.read_attribute_mem	= mantis_ca_read_attr_mem;
-	ca->en50221.write_attribute_mem	= mantis_ca_write_attr_mem;
-	ca->en50221.read_cam_control	= mantis_ca_read_cam_ctl;
-	ca->en50221.write_cam_control	= mantis_ca_write_cam_ctl;
-	ca->en50221.slot_reset		= mantis_ca_slot_reset;
-	ca->en50221.slot_shutdown	= mantis_ca_slot_shutdown;
-	ca->en50221.slot_ts_enable	= mantis_ts_control;
-	ca->en50221.poll_slot_status	= mantis_slot_status;
-	ca->en50221.data		= ca;
-
-	mutex_init(&ca->ca_lock);
-
-	init_waitqueue_head(&ca->hif_data_wq);
-	init_waitqueue_head(&ca->hif_opdone_wq);
-	init_waitqueue_head(&ca->hif_write_wq);
-
-	dprintk(MANTIS_ERROR, 1, "Registering EN50221 device");
-	result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1);
-	if (result != 0) {
-		dprintk(MANTIS_ERROR, 1, "EN50221: Initialization failed <%d>", result);
-		goto err;
-	}
-	dprintk(MANTIS_ERROR, 1, "Registered EN50221 device");
-	mantis_evmgr_init(ca);
-	return 0;
-err:
-	kfree(ca);
-	return result;
-}
-EXPORT_SYMBOL_GPL(mantis_ca_init);
-
-void mantis_ca_exit(struct mantis_pci *mantis)
-{
-	struct mantis_ca *ca = mantis->mantis_ca;
-
-	dprintk(MANTIS_DEBUG, 1, "Mantis CA exit");
-
-	mantis_evmgr_exit(ca);
-	dprintk(MANTIS_ERROR, 1, "Unregistering EN50221 device");
-	if (ca)
-		dvb_ca_en50221_release(&ca->en50221);
-
-	kfree(ca);
-}
-EXPORT_SYMBOL_GPL(mantis_ca_exit);
diff --git a/drivers/media/dvb/mantis/mantis_ca.h b/drivers/media/dvb/mantis/mantis_ca.h
deleted file mode 100644
index dc63e55..0000000
--- a/drivers/media/dvb/mantis/mantis_ca.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MANTIS_CA_H
-#define __MANTIS_CA_H
-
-extern int mantis_ca_init(struct mantis_pci *mantis);
-extern void mantis_ca_exit(struct mantis_pci *mantis);
-
-#endif /* __MANTIS_CA_H */
diff --git a/drivers/media/dvb/mantis/mantis_cards.c b/drivers/media/dvb/mantis/mantis_cards.c
deleted file mode 100644
index 095cf3a..0000000
--- a/drivers/media/dvb/mantis/mantis_cards.c
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <asm/irq.h>
-#include <linux/interrupt.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "mantis_common.h"
-
-#include "mantis_vp1033.h"
-#include "mantis_vp1034.h"
-#include "mantis_vp1041.h"
-#include "mantis_vp2033.h"
-#include "mantis_vp2040.h"
-#include "mantis_vp3030.h"
-
-#include "mantis_dma.h"
-#include "mantis_ca.h"
-#include "mantis_dvb.h"
-#include "mantis_uart.h"
-#include "mantis_ioc.h"
-#include "mantis_pci.h"
-#include "mantis_i2c.h"
-#include "mantis_reg.h"
-
-static unsigned int verbose;
-module_param(verbose, int, 0644);
-MODULE_PARM_DESC(verbose, "verbose startup messages, default is 0 (no)");
-
-static int devs;
-
-#define DRIVER_NAME	"Mantis"
-
-static char *label[10] = {
-	"DMA",
-	"IRQ-0",
-	"IRQ-1",
-	"OCERR",
-	"PABRT",
-	"RIPRR",
-	"PPERR",
-	"FTRGT",
-	"RISCI",
-	"RACK"
-};
-
-static irqreturn_t mantis_irq_handler(int irq, void *dev_id)
-{
-	u32 stat = 0, mask = 0;
-	u32 rst_stat = 0, rst_mask = 0;
-
-	struct mantis_pci *mantis;
-	struct mantis_ca *ca;
-
-	mantis = (struct mantis_pci *) dev_id;
-	if (unlikely(mantis == NULL)) {
-		dprintk(MANTIS_ERROR, 1, "Mantis == NULL");
-		return IRQ_NONE;
-	}
-	ca = mantis->mantis_ca;
-
-	stat = mmread(MANTIS_INT_STAT);
-	mask = mmread(MANTIS_INT_MASK);
-	if (!(stat & mask))
-		return IRQ_NONE;
-
-	rst_mask  = MANTIS_GPIF_WRACK  |
-		    MANTIS_GPIF_OTHERR |
-		    MANTIS_SBUF_WSTO   |
-		    MANTIS_GPIF_EXTIRQ;
-
-	rst_stat  = mmread(MANTIS_GPIF_STATUS);
-	rst_stat &= rst_mask;
-	mmwrite(rst_stat, MANTIS_GPIF_STATUS);
-
-	mantis->mantis_int_stat = stat;
-	mantis->mantis_int_mask = mask;
-	dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask);
-	if (stat & MANTIS_INT_RISCEN) {
-		dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]);
-	}
-	if (stat & MANTIS_INT_IRQ0) {
-		dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]);
-		mantis->gpif_status = rst_stat;
-		wake_up(&ca->hif_write_wq);
-		schedule_work(&ca->hif_evm_work);
-	}
-	if (stat & MANTIS_INT_IRQ1) {
-		dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
-		schedule_work(&mantis->uart_work);
-	}
-	if (stat & MANTIS_INT_OCERR) {
-		dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
-	}
-	if (stat & MANTIS_INT_PABORT) {
-		dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]);
-	}
-	if (stat & MANTIS_INT_RIPERR) {
-		dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]);
-	}
-	if (stat & MANTIS_INT_PPERR) {
-		dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]);
-	}
-	if (stat & MANTIS_INT_FTRGT) {
-		dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]);
-	}
-	if (stat & MANTIS_INT_RISCI) {
-		dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]);
-		mantis->busy_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
-		tasklet_schedule(&mantis->tasklet);
-	}
-	if (stat & MANTIS_INT_I2CDONE) {
-		dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]);
-		wake_up(&mantis->i2c_wq);
-	}
-	mmwrite(stat, MANTIS_INT_STAT);
-	stat &= ~(MANTIS_INT_RISCEN   | MANTIS_INT_I2CDONE |
-		  MANTIS_INT_I2CRACK  | MANTIS_INT_PCMCIA7 |
-		  MANTIS_INT_PCMCIA6  | MANTIS_INT_PCMCIA5 |
-		  MANTIS_INT_PCMCIA4  | MANTIS_INT_PCMCIA3 |
-		  MANTIS_INT_PCMCIA2  | MANTIS_INT_PCMCIA1 |
-		  MANTIS_INT_PCMCIA0  | MANTIS_INT_IRQ1	   |
-		  MANTIS_INT_IRQ0     | MANTIS_INT_OCERR   |
-		  MANTIS_INT_PABORT   | MANTIS_INT_RIPERR  |
-		  MANTIS_INT_PPERR    | MANTIS_INT_FTRGT   |
-		  MANTIS_INT_RISCI);
-
-	if (stat)
-		dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask);
-
-	dprintk(MANTIS_DEBUG, 0, "\n");
-	return IRQ_HANDLED;
-}
-
-static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
-{
-	struct mantis_pci *mantis;
-	struct mantis_hwconfig *config;
-	int err = 0;
-
-	mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL);
-	if (mantis == NULL) {
-		printk(KERN_ERR "%s ERROR: Out of memory\n", __func__);
-		err = -ENOMEM;
-		goto fail0;
-	}
-
-	mantis->num		= devs;
-	mantis->verbose		= verbose;
-	mantis->pdev		= pdev;
-	config			= (struct mantis_hwconfig *) pci_id->driver_data;
-	config->irq_handler	= &mantis_irq_handler;
-	mantis->hwconfig	= config;
-
-	err = mantis_pci_init(mantis);
-	if (err) {
-		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err);
-		goto fail1;
-	}
-
-	err = mantis_stream_control(mantis, STREAM_TO_HIF);
-	if (err < 0) {
-		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err);
-		goto fail1;
-	}
-
-	err = mantis_i2c_init(mantis);
-	if (err < 0) {
-		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err);
-		goto fail2;
-	}
-
-	err = mantis_get_mac(mantis);
-	if (err < 0) {
-		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err);
-		goto fail2;
-	}
-
-	err = mantis_dma_init(mantis);
-	if (err < 0) {
-		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err);
-		goto fail3;
-	}
-
-	err = mantis_dvb_init(mantis);
-	if (err < 0) {
-		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err);
-		goto fail4;
-	}
-	err = mantis_uart_init(mantis);
-	if (err < 0) {
-		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART initialization failed <%d>", err);
-		goto fail6;
-	}
-
-	devs++;
-
-	return err;
-
-
-	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART exit! <%d>", err);
-	mantis_uart_exit(mantis);
-
-fail6:
-fail4:
-	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err);
-	mantis_dma_exit(mantis);
-
-fail3:
-	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err);
-	mantis_i2c_exit(mantis);
-
-fail2:
-	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err);
-	mantis_pci_exit(mantis);
-
-fail1:
-	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err);
-	kfree(mantis);
-
-fail0:
-	return err;
-}
-
-static void __devexit mantis_pci_remove(struct pci_dev *pdev)
-{
-	struct mantis_pci *mantis = pci_get_drvdata(pdev);
-
-	if (mantis) {
-
-		mantis_uart_exit(mantis);
-		mantis_dvb_exit(mantis);
-		mantis_dma_exit(mantis);
-		mantis_i2c_exit(mantis);
-		mantis_pci_exit(mantis);
-		kfree(mantis);
-	}
-	return;
-}
-
-static struct pci_device_id mantis_pci_table[] = {
-	MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1033_DVB_S, &vp1033_config),
-	MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1034_DVB_S, &vp1034_config),
-	MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1041_DVB_S2, &vp1041_config),
-	MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_10, &vp1041_config),
-	MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_20, &vp1041_config),
-	MAKE_ENTRY(TERRATEC, CINERGY_S2_PCI_HD, &vp1041_config),
-	MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2033_DVB_C, &vp2033_config),
-	MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2040_DVB_C, &vp2040_config),
-	MAKE_ENTRY(TECHNISAT, CABLESTAR_HD2, &vp2040_config),
-	MAKE_ENTRY(TERRATEC, CINERGY_C, &vp2033_config),
-	MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3030_DVB_T, &vp3030_config),
-	{ }
-};
-
-MODULE_DEVICE_TABLE(pci, mantis_pci_table);
-
-static struct pci_driver mantis_pci_driver = {
-	.name		= DRIVER_NAME,
-	.id_table	= mantis_pci_table,
-	.probe		= mantis_pci_probe,
-	.remove		= mantis_pci_remove,
-};
-
-static int __devinit mantis_init(void)
-{
-	return pci_register_driver(&mantis_pci_driver);
-}
-
-static void __devexit mantis_exit(void)
-{
-	return pci_unregister_driver(&mantis_pci_driver);
-}
-
-module_init(mantis_init);
-module_exit(mantis_exit);
-
-MODULE_DESCRIPTION("MANTIS driver");
-MODULE_AUTHOR("Manu Abraham");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h
deleted file mode 100644
index f2410cf..0000000
--- a/drivers/media/dvb/mantis/mantis_common.h
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MANTIS_COMMON_H
-#define __MANTIS_COMMON_H
-
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-#include <linux/workqueue.h>
-
-#include "mantis_uart.h"
-
-#include "mantis_link.h"
-
-#define MANTIS_ERROR		0
-#define MANTIS_NOTICE		1
-#define MANTIS_INFO		2
-#define MANTIS_DEBUG		3
-#define MANTIS_TMG		9
-
-#define dprintk(y, z, format, arg...) do {								\
-	if (z) {											\
-		if	((mantis->verbose > MANTIS_ERROR) && (mantis->verbose > y))			\
-			printk(KERN_ERR "%s (%d): " format "\n" , __func__ , mantis->num , ##arg);	\
-		else if	((mantis->verbose > MANTIS_NOTICE) && (mantis->verbose > y))			\
-			printk(KERN_NOTICE "%s (%d): " format "\n" , __func__ , mantis->num , ##arg);	\
-		else if ((mantis->verbose > MANTIS_INFO) && (mantis->verbose > y))			\
-			printk(KERN_INFO "%s (%d): " format "\n" , __func__ , mantis->num , ##arg);	\
-		else if ((mantis->verbose > MANTIS_DEBUG) && (mantis->verbose > y))			\
-			printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg);	\
-		else if ((mantis->verbose > MANTIS_TMG) && (mantis->verbose > y))			\
-			printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg);	\
-	} else {											\
-		if (mantis->verbose > y)								\
-			printk(format , ##arg);								\
-	}												\
-} while(0)
-
-#define mwrite(dat, addr)	writel((dat), addr)
-#define mread(addr)		readl(addr)
-
-#define mmwrite(dat, addr)	mwrite((dat), (mantis->mmio + (addr)))
-#define mmread(addr)		mread(mantis->mmio + (addr))
-
-#define MANTIS_TS_188		0
-#define MANTIS_TS_204		1
-
-#define TWINHAN_TECHNOLOGIES	0x1822
-#define MANTIS			0x4e35
-
-#define TECHNISAT		0x1ae4
-#define TERRATEC		0x153b
-
-#define MAKE_ENTRY(__subven, __subdev, __configptr) {			\
-		.vendor		= TWINHAN_TECHNOLOGIES,			\
-		.device		= MANTIS,				\
-		.subvendor	= (__subven),				\
-		.subdevice	= (__subdev),				\
-		.driver_data	= (unsigned long) (__configptr)		\
-}
-
-enum mantis_i2c_mode {
-	MANTIS_PAGE_MODE = 0,
-	MANTIS_BYTE_MODE,
-};
-
-struct mantis_pci;
-
-struct mantis_hwconfig {
-	char			*model_name;
-	char			*dev_type;
-	u32			ts_size;
-
-	enum mantis_baud	baud_rate;
-	enum mantis_parity	parity;
-	u32			bytes;
-
-	irqreturn_t (*irq_handler)(int irq, void *dev_id);
-	int (*frontend_init)(struct mantis_pci *mantis, struct dvb_frontend *fe);
-
-	u8			power;
-	u8			reset;
-
-	enum mantis_i2c_mode	i2c_mode;
-};
-
-struct mantis_pci {
-	unsigned int		verbose;
-
-	/*	PCI stuff		*/
-	u16			vendor_id;
-	u16			device_id;
-	u16			subsystem_vendor;
-	u16			subsystem_device;
-
-	u8			latency;
-
-	struct pci_dev		*pdev;
-
-	unsigned long		mantis_addr;
-	void __iomem		*mmio;
-
-	u8			irq;
-	u8			revision;
-
-	unsigned int		num;
-
-	/*	RISC Core		*/
-	u32			busy_block;
-	u32			last_block;
-	u8			*buf_cpu;
-	dma_addr_t		buf_dma;
-	u32			*risc_cpu;
-	dma_addr_t		risc_dma;
-
-	struct tasklet_struct	tasklet;
-
-	struct i2c_adapter	adapter;
-	int			i2c_rc;
-	wait_queue_head_t	i2c_wq;
-	struct mutex		i2c_lock;
-
-	/*	DVB stuff		*/
-	struct dvb_adapter	dvb_adapter;
-	struct dvb_frontend	*fe;
-	struct dvb_demux	demux;
-	struct dmxdev		dmxdev;
-	struct dmx_frontend	fe_hw;
-	struct dmx_frontend	fe_mem;
-	struct dvb_net		dvbnet;
-
-	u8			feeds;
-
-	struct mantis_hwconfig	*hwconfig;
-
-	u32			mantis_int_stat;
-	u32			mantis_int_mask;
-
-	/*	board specific		*/
-	u8			mac_address[8];
-	u32			sub_vendor_id;
-	u32			sub_device_id;
-
-	 /*	A12 A13 A14		*/
-	u32			gpio_status;
-
-	u32			gpif_status;
-
-	struct mantis_ca	*mantis_ca;
-
-	wait_queue_head_t	uart_wq;
-	struct work_struct	uart_work;
-	spinlock_t		uart_lock;
-
-	struct rc_dev		*rc;
-	char			input_name[80];
-	char			input_phys[80];
-};
-
-#define MANTIS_HIF_STATUS	(mantis->gpio_status)
-
-#endif /* __MANTIS_COMMON_H */
diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c
deleted file mode 100644
index 22524a8..0000000
--- a/drivers/media/dvb/mantis/mantis_core.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include "mantis_common.h"
-#include "mantis_core.h"
-#include "mantis_vp1033.h"
-#include "mantis_vp1034.h"
-#include "mantis_vp1041.h"
-#include "mantis_vp2033.h"
-#include "mantis_vp2040.h"
-#include "mantis_vp3030.h"
-
-static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length)
-{
-	int err;
-	struct i2c_msg msg[] = {
-		{
-			.addr = 0x50,
-			.flags = 0,
-			.buf = data,
-			.len = 1
-		}, {
-			.addr = 0x50,
-			.flags = I2C_M_RD,
-			.buf = data,
-			.len = length
-		},
-	};
-
-	err = i2c_transfer(&mantis->adapter, msg, 2);
-	if (err < 0) {
-		dprintk(verbose, MANTIS_ERROR, 1,
-			"ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >",
-			err, data[0], data[1]);
-
-		return err;
-	}
-
-	return 0;
-}
-
-static int write_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length)
-{
-	int err;
-
-	struct i2c_msg msg = {
-		.addr = 0x50,
-		.flags = 0,
-		.buf = data,
-		.len = length
-	};
-
-	err = i2c_transfer(&mantis->adapter, &msg, 1);
-	if (err < 0) {
-		dprintk(verbose, MANTIS_ERROR, 1,
-			"ERROR: i2c write: < err=%i length=0x%02x d0=0x%02x, d1=0x%02x >",
-			err, length, data[0], data[1]);
-
-		return err;
-	}
-
-	return 0;
-}
-
-static int get_mac_address(struct mantis_pci *mantis)
-{
-	int err;
-
-	mantis->mac_address[0] = 0x08;
-	err = read_eeprom_byte(mantis, &mantis->mac_address[0], 6);
-	if (err < 0) {
-		dprintk(verbose, MANTIS_ERROR, 1, "Mantis EEPROM read error");
-
-		return err;
-	}
-	dprintk(verbose, MANTIS_ERROR, 0,
-		"    MAC Address=[%pM]\n", mantis->mac_address);
-
-	return 0;
-}
-
-#define MANTIS_MODEL_UNKNOWN	"UNKNOWN"
-#define MANTIS_DEV_UNKNOWN	"UNKNOWN"
-
-struct mantis_hwconfig unknown_device = {
-	.model_name	= MANTIS_MODEL_UNKNOWN,
-	.dev_type	= MANTIS_DEV_UNKNOWN,
-};
-
-static void mantis_load_config(struct mantis_pci *mantis)
-{
-	switch (mantis->subsystem_device) {
-	case MANTIS_VP_1033_DVB_S:	/* VP-1033 */
-		mantis->hwconfig = &vp1033_mantis_config;
-		break;
-	case MANTIS_VP_1034_DVB_S:	/* VP-1034 */
-		mantis->hwconfig = &vp1034_mantis_config;
-		break;
-	case MANTIS_VP_1041_DVB_S2:	/* VP-1041 */
-	case TECHNISAT_SKYSTAR_HD2:
-		mantis->hwconfig = &vp1041_mantis_config;
-		break;
-	case MANTIS_VP_2033_DVB_C:	/* VP-2033 */
-		mantis->hwconfig = &vp2033_mantis_config;
-		break;
-	case MANTIS_VP_2040_DVB_C:	/* VP-2040 */
-	case TERRATEC_CINERGY_C_PCI:	/* VP-2040 clone */
-	case TECHNISAT_CABLESTAR_HD2:
-		mantis->hwconfig = &vp2040_mantis_config;
-		break;
-	case MANTIS_VP_3030_DVB_T:	/* VP-3030 */
-		mantis->hwconfig = &vp3030_mantis_config;
-		break;
-	default:
-		mantis->hwconfig = &unknown_device;
-		break;
-	}
-}
-
-int mantis_core_init(struct mantis_pci *mantis)
-{
-	int err = 0;
-
-	mantis_load_config(mantis);
-	dprintk(verbose, MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n",
-		mantis->hwconfig->model_name, mantis->hwconfig->dev_type,
-		mantis->pdev->bus->number, PCI_SLOT(mantis->pdev->devfn), PCI_FUNC(mantis->pdev->devfn));
-	dprintk(verbose, MANTIS_ERROR, 0, "    Mantis Rev %d [%04x:%04x], ",
-		mantis->revision,
-		mantis->subsystem_vendor, mantis->subsystem_device);
-	dprintk(verbose, MANTIS_ERROR, 0,
-		"irq: %d, latency: %d\n    memory: 0x%lx, mmio: 0x%p\n",
-		mantis->pdev->irq, mantis->latency,
-		mantis->mantis_addr, mantis->mantis_mmio);
-
-	err = mantis_i2c_init(mantis);
-	if (err < 0) {
-		dprintk(verbose, MANTIS_ERROR, 1, "Mantis I2C init failed");
-		return err;
-	}
-	err = get_mac_address(mantis);
-	if (err < 0) {
-		dprintk(verbose, MANTIS_ERROR, 1, "get MAC address failed");
-		return err;
-	}
-	err = mantis_dma_init(mantis);
-	if (err < 0) {
-		dprintk(verbose, MANTIS_ERROR, 1, "Mantis DMA init failed");
-		return err;
-	}
-	err = mantis_dvb_init(mantis);
-	if (err < 0) {
-		dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DVB init failed");
-		return err;
-	}
-	err = mantis_uart_init(mantis);
-	if (err < 0) {
-		dprintk(verbose, MANTIS_DEBUG, 1, "Mantis UART init failed");
-		return err;
-	}
-
-	return 0;
-}
-
-int mantis_core_exit(struct mantis_pci *mantis)
-{
-	mantis_dma_stop(mantis);
-	dprintk(verbose, MANTIS_ERROR, 1, "DMA engine stopping");
-
-	mantis_uart_exit(mantis);
-	dprintk(verbose, MANTIS_ERROR, 1, "UART exit failed");
-
-	if (mantis_dma_exit(mantis) < 0)
-		dprintk(verbose, MANTIS_ERROR, 1, "DMA exit failed");
-	if (mantis_dvb_exit(mantis) < 0)
-		dprintk(verbose, MANTIS_ERROR, 1, "DVB exit failed");
-	if (mantis_i2c_exit(mantis) < 0)
-		dprintk(verbose, MANTIS_ERROR, 1, "I2C adapter delete.. failed");
-
-	return 0;
-}
-
-/* Turn the given bit on or off. */
-void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
-{
-	u32 cur;
-
-	cur = mmread(MANTIS_GPIF_ADDR);
-	if (value)
-		mantis->gpio_status = cur | (1 << bitpos);
-	else
-		mantis->gpio_status = cur & (~(1 << bitpos));
-
-	mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
-	mmwrite(0x00, MANTIS_GPIF_DOUT);
-	udelay(100);
-}
-
-/* direction = 0 , no CI passthrough ; 1 , CI passthrough */
-void mantis_set_direction(struct mantis_pci *mantis, int direction)
-{
-	u32 reg;
-
-	reg = mmread(0x28);
-	dprintk(verbose, MANTIS_DEBUG, 1, "TS direction setup");
-	if (direction == 0x01) {
-		/* to CI */
-		reg |= 0x04;
-		mmwrite(reg, 0x28);
-		reg &= 0xff - 0x04;
-		mmwrite(reg, 0x28);
-	} else {
-		reg &= 0xff - 0x04;
-		mmwrite(reg, 0x28);
-		reg |= 0x04;
-		mmwrite(reg, 0x28);
-	}
-}
diff --git a/drivers/media/dvb/mantis/mantis_core.h b/drivers/media/dvb/mantis/mantis_core.h
deleted file mode 100644
index 833ee42..0000000
--- a/drivers/media/dvb/mantis/mantis_core.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MANTIS_CORE_H
-#define __MANTIS_CORE_H
-
-#include "mantis_common.h"
-
-
-#define FE_TYPE_SAT	0
-#define FE_TYPE_CAB	1
-#define FE_TYPE_TER	2
-
-#define FE_TYPE_TS204	0
-#define FE_TYPE_TS188	1
-
-
-struct vendorname {
-	u8  *sub_vendor_name;
-	u32 sub_vendor_id;
-};
-
-struct devicetype {
-	u8  *sub_device_name;
-	u32 sub_device_id;
-	u8  device_type;
-	u32 type_flags;
-};
-
-
-extern int mantis_dma_init(struct mantis_pci *mantis);
-extern int mantis_dma_exit(struct mantis_pci *mantis);
-extern void mantis_dma_start(struct mantis_pci *mantis);
-extern void mantis_dma_stop(struct mantis_pci *mantis);
-extern int mantis_i2c_init(struct mantis_pci *mantis);
-extern int mantis_i2c_exit(struct mantis_pci *mantis);
-extern int mantis_core_init(struct mantis_pci *mantis);
-extern int mantis_core_exit(struct mantis_pci *mantis);
-
-#endif /* __MANTIS_CORE_H */
diff --git a/drivers/media/dvb/mantis/mantis_dma.c b/drivers/media/dvb/mantis/mantis_dma.c
deleted file mode 100644
index 566c407..0000000
--- a/drivers/media/dvb/mantis/mantis_dma.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/kernel.h>
-#include <asm/page.h>
-#include <linux/vmalloc.h>
-#include <linux/pci.h>
-
-#include <asm/irq.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "mantis_common.h"
-#include "mantis_reg.h"
-#include "mantis_dma.h"
-
-#define RISC_WRITE		(0x01 << 28)
-#define RISC_JUMP		(0x07 << 28)
-#define RISC_IRQ		(0x01 << 24)
-
-#define RISC_STATUS(status)	((((~status) & 0x0f) << 20) | ((status & 0x0f) << 16))
-#define RISC_FLUSH(risc_pos)		(risc_pos = 0)
-#define RISC_INSTR(risc_pos, opcode)	(mantis->risc_cpu[risc_pos++] = cpu_to_le32(opcode))
-
-#define MANTIS_BUF_SIZE		(64 * 1024)
-#define MANTIS_BLOCK_BYTES      (MANTIS_BUF_SIZE / 4)
-#define MANTIS_DMA_TR_BYTES     (2 * 1024) /* upper limit: 4095 bytes. */
-#define MANTIS_BLOCK_COUNT	(MANTIS_BUF_SIZE / MANTIS_BLOCK_BYTES)
-
-#define MANTIS_DMA_TR_UNITS     (MANTIS_BLOCK_BYTES / MANTIS_DMA_TR_BYTES)
-/* MANTIS_BUF_SIZE / MANTIS_DMA_TR_UNITS must not exceed MANTIS_RISC_SIZE (4k RISC cmd buffer) */
-#define MANTIS_RISC_SIZE	PAGE_SIZE /* RISC program must fit here. */
-
-int mantis_dma_exit(struct mantis_pci *mantis)
-{
-	if (mantis->buf_cpu) {
-		dprintk(MANTIS_ERROR, 1,
-			"DMA=0x%lx cpu=0x%p size=%d",
-			(unsigned long) mantis->buf_dma,
-			 mantis->buf_cpu,
-			 MANTIS_BUF_SIZE);
-
-		pci_free_consistent(mantis->pdev, MANTIS_BUF_SIZE,
-				    mantis->buf_cpu, mantis->buf_dma);
-
-		mantis->buf_cpu = NULL;
-	}
-	if (mantis->risc_cpu) {
-		dprintk(MANTIS_ERROR, 1,
-			"RISC=0x%lx cpu=0x%p size=%lx",
-			(unsigned long) mantis->risc_dma,
-			mantis->risc_cpu,
-			MANTIS_RISC_SIZE);
-
-		pci_free_consistent(mantis->pdev, MANTIS_RISC_SIZE,
-				    mantis->risc_cpu, mantis->risc_dma);
-
-		mantis->risc_cpu = NULL;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(mantis_dma_exit);
-
-static inline int mantis_alloc_buffers(struct mantis_pci *mantis)
-{
-	if (!mantis->buf_cpu) {
-		mantis->buf_cpu = pci_alloc_consistent(mantis->pdev,
-						       MANTIS_BUF_SIZE,
-						       &mantis->buf_dma);
-		if (!mantis->buf_cpu) {
-			dprintk(MANTIS_ERROR, 1,
-				"DMA buffer allocation failed");
-
-			goto err;
-		}
-		dprintk(MANTIS_ERROR, 1,
-			"DMA=0x%lx cpu=0x%p size=%d",
-			(unsigned long) mantis->buf_dma,
-			mantis->buf_cpu, MANTIS_BUF_SIZE);
-	}
-	if (!mantis->risc_cpu) {
-		mantis->risc_cpu = pci_alloc_consistent(mantis->pdev,
-							MANTIS_RISC_SIZE,
-							&mantis->risc_dma);
-
-		if (!mantis->risc_cpu) {
-			dprintk(MANTIS_ERROR, 1,
-				"RISC program allocation failed");
-
-			mantis_dma_exit(mantis);
-
-			goto err;
-		}
-		dprintk(MANTIS_ERROR, 1,
-			"RISC=0x%lx cpu=0x%p size=%lx",
-			(unsigned long) mantis->risc_dma,
-			mantis->risc_cpu, MANTIS_RISC_SIZE);
-	}
-
-	return 0;
-err:
-	dprintk(MANTIS_ERROR, 1, "Out of memory (?) .....");
-	return -ENOMEM;
-}
-
-int mantis_dma_init(struct mantis_pci *mantis)
-{
-	int err = 0;
-
-	dprintk(MANTIS_DEBUG, 1, "Mantis DMA init");
-	if (mantis_alloc_buffers(mantis) < 0) {
-		dprintk(MANTIS_ERROR, 1, "Error allocating DMA buffer");
-
-		/* Stop RISC Engine */
-		mmwrite(0, MANTIS_DMA_CTL);
-
-		goto err;
-	}
-
-	return 0;
-err:
-	return err;
-}
-EXPORT_SYMBOL_GPL(mantis_dma_init);
-
-static inline void mantis_risc_program(struct mantis_pci *mantis)
-{
-	u32 buf_pos = 0;
-	u32 line, step;
-	u32 risc_pos;
-
-	dprintk(MANTIS_DEBUG, 1, "Mantis create RISC program");
-	RISC_FLUSH(risc_pos);
-
-	dprintk(MANTIS_DEBUG, 1, "risc len lines %u, bytes per line %u, bytes per DMA tr %u",
-		MANTIS_BLOCK_COUNT, MANTIS_BLOCK_BYTES, MANTIS_DMA_TR_BYTES);
-
-	for (line = 0; line < MANTIS_BLOCK_COUNT; line++) {
-		for (step = 0; step < MANTIS_DMA_TR_UNITS; step++) {
-			dprintk(MANTIS_DEBUG, 1, "RISC PROG line=[%d], step=[%d]", line, step);
-			if (step == 0) {
-				RISC_INSTR(risc_pos, RISC_WRITE	|
-					   RISC_IRQ	|
-					   RISC_STATUS(line) |
-					   MANTIS_DMA_TR_BYTES);
-			} else {
-				RISC_INSTR(risc_pos, RISC_WRITE | MANTIS_DMA_TR_BYTES);
-			}
-			RISC_INSTR(risc_pos, mantis->buf_dma + buf_pos);
-			buf_pos += MANTIS_DMA_TR_BYTES;
-		  }
-	}
-	RISC_INSTR(risc_pos, RISC_JUMP);
-	RISC_INSTR(risc_pos, mantis->risc_dma);
-}
-
-void mantis_dma_start(struct mantis_pci *mantis)
-{
-	dprintk(MANTIS_DEBUG, 1, "Mantis Start DMA engine");
-
-	mantis_risc_program(mantis);
-	mmwrite(mantis->risc_dma, MANTIS_RISC_START);
-	mmwrite(mmread(MANTIS_GPIF_ADDR) | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
-
-	mmwrite(0, MANTIS_DMA_CTL);
-	mantis->last_block = mantis->busy_block = 0;
-
-	mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_RISCI, MANTIS_INT_MASK);
-
-	mmwrite(MANTIS_FIFO_EN | MANTIS_DCAP_EN
-			       | MANTIS_RISC_EN, MANTIS_DMA_CTL);
-
-}
-
-void mantis_dma_stop(struct mantis_pci *mantis)
-{
-	dprintk(MANTIS_DEBUG, 1, "Mantis Stop DMA engine");
-
-	mmwrite((mmread(MANTIS_GPIF_ADDR) & (~(MANTIS_GPIF_HIFRDWRN))), MANTIS_GPIF_ADDR);
-
-	mmwrite((mmread(MANTIS_DMA_CTL) & ~(MANTIS_FIFO_EN |
-					    MANTIS_DCAP_EN |
-					    MANTIS_RISC_EN)), MANTIS_DMA_CTL);
-
-	mmwrite(mmread(MANTIS_INT_STAT), MANTIS_INT_STAT);
-
-	mmwrite(mmread(MANTIS_INT_MASK) & ~(MANTIS_INT_RISCI |
-					    MANTIS_INT_RISCEN), MANTIS_INT_MASK);
-}
-
-
-void mantis_dma_xfer(unsigned long data)
-{
-	struct mantis_pci *mantis = (struct mantis_pci *) data;
-	struct mantis_hwconfig *config = mantis->hwconfig;
-
-	while (mantis->last_block != mantis->busy_block) {
-		dprintk(MANTIS_DEBUG, 1, "last block=[%d] finished block=[%d]",
-			mantis->last_block, mantis->busy_block);
-
-		(config->ts_size ? dvb_dmx_swfilter_204 : dvb_dmx_swfilter)
-		(&mantis->demux, &mantis->buf_cpu[mantis->last_block * MANTIS_BLOCK_BYTES], MANTIS_BLOCK_BYTES);
-		mantis->last_block = (mantis->last_block + 1) % MANTIS_BLOCK_COUNT;
-	}
-}
diff --git a/drivers/media/dvb/mantis/mantis_dma.h b/drivers/media/dvb/mantis/mantis_dma.h
deleted file mode 100644
index 6be00fa..0000000
--- a/drivers/media/dvb/mantis/mantis_dma.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MANTIS_DMA_H
-#define __MANTIS_DMA_H
-
-extern int mantis_dma_init(struct mantis_pci *mantis);
-extern int mantis_dma_exit(struct mantis_pci *mantis);
-extern void mantis_dma_start(struct mantis_pci *mantis);
-extern void mantis_dma_stop(struct mantis_pci *mantis);
-extern void mantis_dma_xfer(unsigned long data);
-
-#endif /* __MANTIS_DMA_H */
diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c
deleted file mode 100644
index e5180e4..0000000
--- a/drivers/media/dvb/mantis/mantis_dvb.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
-	Mantis PCI bridge driver
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/kernel.h>
-#include <linux/bitops.h>
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/i2c.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "mantis_common.h"
-#include "mantis_dma.h"
-#include "mantis_ca.h"
-#include "mantis_ioc.h"
-#include "mantis_dvb.h"
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power)
-{
-	struct mantis_hwconfig *config = mantis->hwconfig;
-
-	switch (power) {
-	case POWER_ON:
-		dprintk(MANTIS_DEBUG, 1, "Power ON");
-		mantis_gpio_set_bits(mantis, config->power, POWER_ON);
-		msleep(100);
-		mantis_gpio_set_bits(mantis, config->power, POWER_ON);
-		msleep(100);
-		break;
-
-	case POWER_OFF:
-		dprintk(MANTIS_DEBUG, 1, "Power OFF");
-		mantis_gpio_set_bits(mantis, config->power, POWER_OFF);
-		msleep(100);
-		break;
-
-	default:
-		dprintk(MANTIS_DEBUG, 1, "Unknown state <%02x>", power);
-		return -1;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(mantis_frontend_power);
-
-void mantis_frontend_soft_reset(struct mantis_pci *mantis)
-{
-	struct mantis_hwconfig *config = mantis->hwconfig;
-
-	dprintk(MANTIS_DEBUG, 1, "Frontend RESET");
-	mantis_gpio_set_bits(mantis, config->reset, 0);
-	msleep(100);
-	mantis_gpio_set_bits(mantis, config->reset, 0);
-	msleep(100);
-	mantis_gpio_set_bits(mantis, config->reset, 1);
-	msleep(100);
-	mantis_gpio_set_bits(mantis, config->reset, 1);
-	msleep(100);
-
-	return;
-}
-EXPORT_SYMBOL_GPL(mantis_frontend_soft_reset);
-
-static int mantis_frontend_shutdown(struct mantis_pci *mantis)
-{
-	int err;
-
-	mantis_frontend_soft_reset(mantis);
-	err = mantis_frontend_power(mantis, POWER_OFF);
-	if (err != 0) {
-		dprintk(MANTIS_ERROR, 1, "Frontend POWER OFF failed! <%d>", err);
-		return 1;
-	}
-
-	return 0;
-}
-
-static int mantis_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
-	struct mantis_pci *mantis = dvbdmx->priv;
-
-	dprintk(MANTIS_DEBUG, 1, "Mantis DVB Start feed");
-	if (!dvbdmx->dmx.frontend) {
-		dprintk(MANTIS_DEBUG, 1, "no frontend ?");
-		return -EINVAL;
-	}
-
-	mantis->feeds++;
-	dprintk(MANTIS_DEBUG, 1, "mantis start feed, feeds=%d",	mantis->feeds);
-
-	if (mantis->feeds == 1)	 {
-		dprintk(MANTIS_DEBUG, 1, "mantis start feed & dma");
-		mantis_dma_start(mantis);
-		tasklet_enable(&mantis->tasklet);
-	}
-
-	return mantis->feeds;
-}
-
-static int mantis_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
-	struct mantis_pci *mantis = dvbdmx->priv;
-
-	dprintk(MANTIS_DEBUG, 1, "Mantis DVB Stop feed");
-	if (!dvbdmx->dmx.frontend) {
-		dprintk(MANTIS_DEBUG, 1, "no frontend ?");
-		return -EINVAL;
-	}
-
-	mantis->feeds--;
-	if (mantis->feeds == 0) {
-		dprintk(MANTIS_DEBUG, 1, "mantis stop feed and dma");
-		tasklet_disable(&mantis->tasklet);
-		mantis_dma_stop(mantis);
-	}
-
-	return 0;
-}
-
-int __devinit mantis_dvb_init(struct mantis_pci *mantis)
-{
-	struct mantis_hwconfig *config = mantis->hwconfig;
-	int result = -1;
-
-	dprintk(MANTIS_DEBUG, 1, "dvb_register_adapter");
-
-	result = dvb_register_adapter(&mantis->dvb_adapter,
-				      "Mantis DVB adapter",
-				      THIS_MODULE,
-				      &mantis->pdev->dev,
-				      adapter_nr);
-
-	if (result < 0) {
-
-		dprintk(MANTIS_ERROR, 1, "Error registering adapter");
-		return -ENODEV;
-	}
-
-	mantis->dvb_adapter.priv	= mantis;
-	mantis->demux.dmx.capabilities	= DMX_TS_FILTERING	|
-					 DMX_SECTION_FILTERING	|
-					 DMX_MEMORY_BASED_FILTERING;
-
-	mantis->demux.priv		= mantis;
-	mantis->demux.filternum		= 256;
-	mantis->demux.feednum		= 256;
-	mantis->demux.start_feed	= mantis_dvb_start_feed;
-	mantis->demux.stop_feed		= mantis_dvb_stop_feed;
-	mantis->demux.write_to_decoder	= NULL;
-
-	dprintk(MANTIS_DEBUG, 1, "dvb_dmx_init");
-	result = dvb_dmx_init(&mantis->demux);
-	if (result < 0) {
-		dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
-
-		goto err0;
-	}
-
-	mantis->dmxdev.filternum	= 256;
-	mantis->dmxdev.demux		= &mantis->demux.dmx;
-	mantis->dmxdev.capabilities	= 0;
-	dprintk(MANTIS_DEBUG, 1, "dvb_dmxdev_init");
-
-	result = dvb_dmxdev_init(&mantis->dmxdev, &mantis->dvb_adapter);
-	if (result < 0) {
-
-		dprintk(MANTIS_ERROR, 1, "dvb_dmxdev_init failed, ERROR=%d", result);
-		goto err1;
-	}
-
-	mantis->fe_hw.source		= DMX_FRONTEND_0;
-	result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_hw);
-	if (result < 0) {
-
-		dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
-		goto err2;
-	}
-
-	mantis->fe_mem.source		= DMX_MEMORY_FE;
-	result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_mem);
-	if (result < 0) {
-		dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
-		goto err3;
-	}
-
-	result = mantis->demux.dmx.connect_frontend(&mantis->demux.dmx, &mantis->fe_hw);
-	if (result < 0) {
-		dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
-		goto err4;
-	}
-
-	dvb_net_init(&mantis->dvb_adapter, &mantis->dvbnet, &mantis->demux.dmx);
-	tasklet_init(&mantis->tasklet, mantis_dma_xfer, (unsigned long) mantis);
-	tasklet_disable(&mantis->tasklet);
-	if (mantis->hwconfig) {
-		result = config->frontend_init(mantis, mantis->fe);
-		if (result < 0) {
-			dprintk(MANTIS_ERROR, 1, "!!! NO Frontends found !!!");
-			goto err5;
-		} else {
-			if (mantis->fe == NULL) {
-				dprintk(MANTIS_ERROR, 1, "FE <NULL>");
-				goto err5;
-			}
-
-			if (dvb_register_frontend(&mantis->dvb_adapter, mantis->fe)) {
-				dprintk(MANTIS_ERROR, 1, "ERROR: Frontend registration failed");
-
-				if (mantis->fe->ops.release)
-					mantis->fe->ops.release(mantis->fe);
-
-				mantis->fe = NULL;
-				goto err5;
-			}
-		}
-	}
-
-	return 0;
-
-	/* Error conditions ..	*/
-err5:
-	tasklet_kill(&mantis->tasklet);
-	dvb_net_release(&mantis->dvbnet);
-	dvb_unregister_frontend(mantis->fe);
-	dvb_frontend_detach(mantis->fe);
-err4:
-	mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem);
-
-err3:
-	mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw);
-
-err2:
-	dvb_dmxdev_release(&mantis->dmxdev);
-
-err1:
-	dvb_dmx_release(&mantis->demux);
-
-err0:
-	dvb_unregister_adapter(&mantis->dvb_adapter);
-
-	return result;
-}
-EXPORT_SYMBOL_GPL(mantis_dvb_init);
-
-int __devexit mantis_dvb_exit(struct mantis_pci *mantis)
-{
-	int err;
-
-	if (mantis->fe) {
-		/* mantis_ca_exit(mantis); */
-		err = mantis_frontend_shutdown(mantis);
-		if (err != 0)
-			dprintk(MANTIS_ERROR, 1, "Frontend exit while POWER ON! <%d>", err);
-		dvb_unregister_frontend(mantis->fe);
-		dvb_frontend_detach(mantis->fe);
-	}
-
-	tasklet_kill(&mantis->tasklet);
-	dvb_net_release(&mantis->dvbnet);
-
-	mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem);
-	mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw);
-
-	dvb_dmxdev_release(&mantis->dmxdev);
-	dvb_dmx_release(&mantis->demux);
-
-	dprintk(MANTIS_DEBUG, 1, "dvb_unregister_adapter");
-	dvb_unregister_adapter(&mantis->dvb_adapter);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(mantis_dvb_exit);
diff --git a/drivers/media/dvb/mantis/mantis_dvb.h b/drivers/media/dvb/mantis/mantis_dvb.h
deleted file mode 100644
index 464199d..0000000
--- a/drivers/media/dvb/mantis/mantis_dvb.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MANTIS_DVB_H
-#define __MANTIS_DVB_H
-
-enum mantis_power {
-	POWER_OFF	= 0,
-	POWER_ON	= 1
-};
-
-extern int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power);
-extern void mantis_frontend_soft_reset(struct mantis_pci *mantis);
-
-extern int mantis_dvb_init(struct mantis_pci *mantis);
-extern int mantis_dvb_exit(struct mantis_pci *mantis);
-
-#endif /* __MANTIS_DVB_H */
diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c
deleted file mode 100644
index 909ff54..0000000
--- a/drivers/media/dvb/mantis/mantis_evm.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/kernel.h>
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "mantis_common.h"
-#include "mantis_link.h"
-#include "mantis_hif.h"
-#include "mantis_reg.h"
-
-static void mantis_hifevm_work(struct work_struct *work)
-{
-	struct mantis_ca *ca = container_of(work, struct mantis_ca, hif_evm_work);
-	struct mantis_pci *mantis = ca->ca_priv;
-
-	u32 gpif_stat;
-
-	gpif_stat = mmread(MANTIS_GPIF_STATUS);
-
-	if (gpif_stat & MANTIS_GPIF_DETSTAT) {
-		if (gpif_stat & MANTIS_CARD_PLUGIN) {
-			dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num);
-			mmwrite(0xdada0000, MANTIS_CARD_RESET);
-			mantis_event_cam_plugin(ca);
-			dvb_ca_en50221_camchange_irq(&ca->en50221,
-						     0,
-						     DVB_CA_EN50221_CAMCHANGE_INSERTED);
-		}
-	} else {
-		if (gpif_stat & MANTIS_CARD_PLUGOUT) {
-			dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num);
-			mmwrite(0xdada0000, MANTIS_CARD_RESET);
-			mantis_event_cam_unplug(ca);
-			dvb_ca_en50221_camchange_irq(&ca->en50221,
-						     0,
-						     DVB_CA_EN50221_CAMCHANGE_REMOVED);
-		}
-	}
-
-	if (mantis->gpif_status & MANTIS_GPIF_EXTIRQ)
-		dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Ext IRQ", mantis->num);
-
-	if (mantis->gpif_status & MANTIS_SBUF_WSTO)
-		dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Timeout", mantis->num);
-
-	if (mantis->gpif_status & MANTIS_GPIF_OTHERR)
-		dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Alignment Error", mantis->num);
-
-	if (gpif_stat & MANTIS_SBUF_OVFLW)
-		dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Overflow", mantis->num);
-
-	if (gpif_stat & MANTIS_GPIF_BRRDY)
-		dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num);
-
-	if (gpif_stat & MANTIS_GPIF_INTSTAT)
-		dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): GPIF IRQ", mantis->num);
-
-	if (gpif_stat & MANTIS_SBUF_EMPTY)
-		dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Empty", mantis->num);
-
-	if (gpif_stat & MANTIS_SBUF_OPDONE) {
-		dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num);
-		ca->sbuf_status = MANTIS_SBUF_DATA_AVAIL;
-		ca->hif_event = MANTIS_SBUF_OPDONE;
-		wake_up(&ca->hif_opdone_wq);
-	}
-}
-
-int mantis_evmgr_init(struct mantis_ca *ca)
-{
-	struct mantis_pci *mantis = ca->ca_priv;
-
-	dprintk(MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager");
-	INIT_WORK(&ca->hif_evm_work, mantis_hifevm_work);
-	mantis_pcmcia_init(ca);
-	schedule_work(&ca->hif_evm_work);
-	mantis_hif_init(ca);
-	return 0;
-}
-
-void mantis_evmgr_exit(struct mantis_ca *ca)
-{
-	struct mantis_pci *mantis = ca->ca_priv;
-
-	dprintk(MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting");
-	flush_work(&ca->hif_evm_work);
-	mantis_hif_exit(ca);
-	mantis_pcmcia_exit(ca);
-}
diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c
deleted file mode 100644
index 10c68df..0000000
--- a/drivers/media/dvb/mantis/mantis_hif.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-
-#include <linux/interrupt.h>
-#include <asm/io.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "mantis_common.h"
-
-#include "mantis_hif.h"
-#include "mantis_link.h" /* temporary due to physical layer stuff */
-
-#include "mantis_reg.h"
-
-
-static int mantis_hif_sbuf_opdone_wait(struct mantis_ca *ca)
-{
-	struct mantis_pci *mantis = ca->ca_priv;
-	int rc = 0;
-
-	if (wait_event_timeout(ca->hif_opdone_wq,
-			       ca->hif_event & MANTIS_SBUF_OPDONE,
-			       msecs_to_jiffies(500)) == -ERESTARTSYS) {
-
-		dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Smart buffer operation timeout !", mantis->num);
-		rc = -EREMOTEIO;
-	}
-	dprintk(MANTIS_DEBUG, 1, "Smart Buffer Operation complete");
-	ca->hif_event &= ~MANTIS_SBUF_OPDONE;
-	return rc;
-}
-
-static int mantis_hif_write_wait(struct mantis_ca *ca)
-{
-	struct mantis_pci *mantis = ca->ca_priv;
-	u32 opdone = 0, timeout = 0;
-	int rc = 0;
-
-	if (wait_event_timeout(ca->hif_write_wq,
-			       mantis->gpif_status & MANTIS_GPIF_WRACK,
-			       msecs_to_jiffies(500)) == -ERESTARTSYS) {
-
-		dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write ACK timed out !", mantis->num);
-		rc = -EREMOTEIO;
-	}
-	dprintk(MANTIS_DEBUG, 1, "Write Acknowledged");
-	mantis->gpif_status &= ~MANTIS_GPIF_WRACK;
-	while (!opdone) {
-		opdone = (mmread(MANTIS_GPIF_STATUS) & MANTIS_SBUF_OPDONE);
-		udelay(500);
-		timeout++;
-		if (timeout > 100) {
-			dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write operation timed out!", mantis->num);
-			rc = -ETIMEDOUT;
-			break;
-		}
-	}
-	dprintk(MANTIS_DEBUG, 1, "HIF Write success");
-	return rc;
-}
-
-
-int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr)
-{
-	struct mantis_pci *mantis = ca->ca_priv;
-	u32 hif_addr = 0, data, count = 4;
-
-	dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Read", mantis->num);
-	mutex_lock(&ca->ca_lock);
-	hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
-	hif_addr &= ~MANTIS_GPIF_PCMCIAIOM;
-	hif_addr |=  MANTIS_HIF_STATUS;
-	hif_addr |=  addr;
-
-	mmwrite(hif_addr, MANTIS_GPIF_BRADDR);
-	mmwrite(count, MANTIS_GPIF_BRBYTES);
-	udelay(20);
-	mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
-
-	if (mantis_hif_sbuf_opdone_wait(ca) != 0) {
-		dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num);
-		mutex_unlock(&ca->ca_lock);
-		return -EREMOTEIO;
-	}
-	data = mmread(MANTIS_GPIF_DIN);
-	mutex_unlock(&ca->ca_lock);
-	dprintk(MANTIS_DEBUG, 1, "Mem Read: 0x%02x", data);
-	return (data >> 24) & 0xff;
-}
-
-int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data)
-{
-	struct mantis_slot *slot = ca->slot;
-	struct mantis_pci *mantis = ca->ca_priv;
-	u32 hif_addr = 0;
-
-	dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Write", mantis->num);
-	mutex_lock(&ca->ca_lock);
-	hif_addr &= ~MANTIS_GPIF_HIFRDWRN;
-	hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
-	hif_addr &= ~MANTIS_GPIF_PCMCIAIOM;
-	hif_addr |=  MANTIS_HIF_STATUS;
-	hif_addr |=  addr;
-
-	mmwrite(slot->slave_cfg, MANTIS_GPIF_CFGSLA); /* Slot0 alone for now */
-	mmwrite(hif_addr, MANTIS_GPIF_ADDR);
-	mmwrite(data, MANTIS_GPIF_DOUT);
-
-	if (mantis_hif_write_wait(ca) != 0) {
-		dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
-		mutex_unlock(&ca->ca_lock);
-		return -EREMOTEIO;
-	}
-	dprintk(MANTIS_DEBUG, 1, "Mem Write: (0x%02x to 0x%02x)", data, addr);
-	mutex_unlock(&ca->ca_lock);
-
-	return 0;
-}
-
-int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr)
-{
-	struct mantis_pci *mantis = ca->ca_priv;
-	u32 data, hif_addr = 0;
-
-	dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Read", mantis->num);
-	mutex_lock(&ca->ca_lock);
-	hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
-	hif_addr |=  MANTIS_GPIF_PCMCIAIOM;
-	hif_addr |=  MANTIS_HIF_STATUS;
-	hif_addr |=  addr;
-
-	mmwrite(hif_addr, MANTIS_GPIF_BRADDR);
-	mmwrite(1, MANTIS_GPIF_BRBYTES);
-	udelay(20);
-	mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
-
-	if (mantis_hif_sbuf_opdone_wait(ca) != 0) {
-		dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
-		mutex_unlock(&ca->ca_lock);
-		return -EREMOTEIO;
-	}
-	data = mmread(MANTIS_GPIF_DIN);
-	dprintk(MANTIS_DEBUG, 1, "I/O Read: 0x%02x", data);
-	udelay(50);
-	mutex_unlock(&ca->ca_lock);
-
-	return (u8) data;
-}
-
-int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data)
-{
-	struct mantis_pci *mantis = ca->ca_priv;
-	u32 hif_addr = 0;
-
-	dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Write", mantis->num);
-	mutex_lock(&ca->ca_lock);
-	hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
-	hif_addr &= ~MANTIS_GPIF_HIFRDWRN;
-	hif_addr |=  MANTIS_GPIF_PCMCIAIOM;
-	hif_addr |=  MANTIS_HIF_STATUS;
-	hif_addr |=  addr;
-
-	mmwrite(hif_addr, MANTIS_GPIF_ADDR);
-	mmwrite(data, MANTIS_GPIF_DOUT);
-
-	if (mantis_hif_write_wait(ca) != 0) {
-		dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
-		mutex_unlock(&ca->ca_lock);
-		return -EREMOTEIO;
-	}
-	dprintk(MANTIS_DEBUG, 1, "I/O Write: (0x%02x to 0x%02x)", data, addr);
-	mutex_unlock(&ca->ca_lock);
-	udelay(50);
-
-	return 0;
-}
-
-int mantis_hif_init(struct mantis_ca *ca)
-{
-	struct mantis_slot *slot = ca->slot;
-	struct mantis_pci *mantis = ca->ca_priv;
-	u32 irqcfg;
-
-	slot[0].slave_cfg = 0x70773028;
-	dprintk(MANTIS_ERROR, 1, "Adapter(%d) Initializing Mantis Host Interface", mantis->num);
-
-	mutex_lock(&ca->ca_lock);
-	irqcfg = mmread(MANTIS_GPIF_IRQCFG);
-	irqcfg = MANTIS_MASK_BRRDY	|
-		 MANTIS_MASK_WRACK	|
-		 MANTIS_MASK_EXTIRQ	|
-		 MANTIS_MASK_WSTO	|
-		 MANTIS_MASK_OTHERR	|
-		 MANTIS_MASK_OVFLW;
-
-	mmwrite(irqcfg, MANTIS_GPIF_IRQCFG);
-	mutex_unlock(&ca->ca_lock);
-
-	return 0;
-}
-
-void mantis_hif_exit(struct mantis_ca *ca)
-{
-	struct mantis_pci *mantis = ca->ca_priv;
-	u32 irqcfg;
-
-	dprintk(MANTIS_ERROR, 1, "Adapter(%d) Exiting Mantis Host Interface", mantis->num);
-	mutex_lock(&ca->ca_lock);
-	irqcfg = mmread(MANTIS_GPIF_IRQCFG);
-	irqcfg &= ~MANTIS_MASK_BRRDY;
-	mmwrite(irqcfg, MANTIS_GPIF_IRQCFG);
-	mutex_unlock(&ca->ca_lock);
-}
diff --git a/drivers/media/dvb/mantis/mantis_hif.h b/drivers/media/dvb/mantis/mantis_hif.h
deleted file mode 100644
index 9094f9e..0000000
--- a/drivers/media/dvb/mantis/mantis_hif.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MANTIS_HIF_H
-#define __MANTIS_HIF_H
-
-#define MANTIS_HIF_MEMRD		1
-#define MANTIS_HIF_MEMWR		2
-#define MANTIS_HIF_IOMRD		3
-#define MANTIS_HIF_IOMWR		4
-
-#endif /* __MANTIS_HIF_H */
diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c
deleted file mode 100644
index e779451..0000000
--- a/drivers/media/dvb/mantis/mantis_i2c.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <asm/io.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/i2c.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "mantis_common.h"
-#include "mantis_reg.h"
-#include "mantis_i2c.h"
-
-#define TRIALS			10000
-
-static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg)
-{
-	u32 rxd, i, stat, trials;
-
-	dprintk(MANTIS_INFO, 0, "        %s:  Address=[0x%02x] <R>[ ",
-		__func__, msg->addr);
-
-	for (i = 0; i < msg->len; i++) {
-		rxd = (msg->addr << 25) | (1 << 24)
-					| MANTIS_I2C_RATE_3
-					| MANTIS_I2C_STOP
-					| MANTIS_I2C_PGMODE;
-
-		if (i == (msg->len - 1))
-			rxd &= ~MANTIS_I2C_STOP;
-
-		mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT);
-		mmwrite(rxd, MANTIS_I2CDATA_CTL);
-
-		/* wait for xfer completion */
-		for (trials = 0; trials < TRIALS; trials++) {
-			stat = mmread(MANTIS_INT_STAT);
-			if (stat & MANTIS_INT_I2CDONE)
-				break;
-		}
-
-		dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials);
-
-		/* wait for xfer completion */
-		for (trials = 0; trials < TRIALS; trials++) {
-			stat = mmread(MANTIS_INT_STAT);
-			if (stat & MANTIS_INT_I2CRACK)
-				break;
-		}
-
-		dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials);
-
-		rxd = mmread(MANTIS_I2CDATA_CTL);
-		msg->buf[i] = (u8)((rxd >> 8) & 0xFF);
-		dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]);
-	}
-	dprintk(MANTIS_INFO, 0, "]\n");
-
-	return 0;
-}
-
-static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg)
-{
-	int i;
-	u32 txd = 0, stat, trials;
-
-	dprintk(MANTIS_INFO, 0, "        %s: Address=[0x%02x] <W>[ ",
-		__func__, msg->addr);
-
-	for (i = 0; i < msg->len; i++) {
-		dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]);
-		txd = (msg->addr << 25) | (msg->buf[i] << 8)
-					| MANTIS_I2C_RATE_3
-					| MANTIS_I2C_STOP
-					| MANTIS_I2C_PGMODE;
-
-		if (i == (msg->len - 1))
-			txd &= ~MANTIS_I2C_STOP;
-
-		mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT);
-		mmwrite(txd, MANTIS_I2CDATA_CTL);
-
-		/* wait for xfer completion */
-		for (trials = 0; trials < TRIALS; trials++) {
-			stat = mmread(MANTIS_INT_STAT);
-			if (stat & MANTIS_INT_I2CDONE)
-				break;
-		}
-
-		dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials);
-
-		/* wait for xfer completion */
-		for (trials = 0; trials < TRIALS; trials++) {
-			stat = mmread(MANTIS_INT_STAT);
-			if (stat & MANTIS_INT_I2CRACK)
-				break;
-		}
-
-		dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials);
-	}
-	dprintk(MANTIS_INFO, 0, "]\n");
-
-	return 0;
-}
-
-static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
-{
-	int ret = 0, i = 0, trials;
-	u32 stat, data, txd;
-	struct mantis_pci *mantis;
-	struct mantis_hwconfig *config;
-
-	mantis = i2c_get_adapdata(adapter);
-	BUG_ON(!mantis);
-	config = mantis->hwconfig;
-	BUG_ON(!config);
-
-	dprintk(MANTIS_DEBUG, 1, "Messages:%d", num);
-	mutex_lock(&mantis->i2c_lock);
-
-	while (i < num) {
-		/* Byte MODE */
-		if ((config->i2c_mode & MANTIS_BYTE_MODE) &&
-		    ((i + 1) < num)			&&
-		    (msgs[i].len < 2)			&&
-		    (msgs[i + 1].len < 2)		&&
-		    (msgs[i + 1].flags & I2C_M_RD)) {
-
-			dprintk(MANTIS_DEBUG, 0, "        Byte MODE:\n");
-
-			/* Read operation */
-			txd = msgs[i].addr << 25 | (0x1 << 24)
-						 | (msgs[i].buf[0] << 16)
-						 | MANTIS_I2C_RATE_3;
-
-			mmwrite(txd, MANTIS_I2CDATA_CTL);
-			/* wait for xfer completion */
-			for (trials = 0; trials < TRIALS; trials++) {
-				stat = mmread(MANTIS_INT_STAT);
-				if (stat & MANTIS_INT_I2CDONE)
-					break;
-			}
-
-			/* check for xfer completion */
-			if (stat & MANTIS_INT_I2CDONE) {
-				/* check xfer was acknowledged */
-				if (stat & MANTIS_INT_I2CRACK) {
-					data = mmread(MANTIS_I2CDATA_CTL);
-					msgs[i + 1].buf[0] = (data >> 8) & 0xff;
-					dprintk(MANTIS_DEBUG, 0, "        Byte <%d> RXD=0x%02x  [%02x]\n", 0x0, data, msgs[i + 1].buf[0]);
-				} else {
-					/* I/O error */
-					dprintk(MANTIS_ERROR, 1, "        I/O error, LINE:%d", __LINE__);
-					ret = -EIO;
-					break;
-				}
-			} else {
-				/* I/O error */
-				dprintk(MANTIS_ERROR, 1, "        I/O error, LINE:%d", __LINE__);
-				ret = -EIO;
-				break;
-			}
-			i += 2; /* Write/Read operation in one go */
-		}
-
-		if (i < num) {
-			if (msgs[i].flags & I2C_M_RD)
-				ret = mantis_i2c_read(mantis, &msgs[i]);
-			else
-				ret = mantis_i2c_write(mantis, &msgs[i]);
-
-			i++;
-			if (ret < 0)
-				goto bail_out;
-		}
-
-	}
-
-	mutex_unlock(&mantis->i2c_lock);
-
-	return num;
-
-bail_out:
-	mutex_unlock(&mantis->i2c_lock);
-	return ret;
-}
-
-static u32 mantis_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_SMBUS_EMUL;
-}
-
-static struct i2c_algorithm mantis_algo = {
-	.master_xfer		= mantis_i2c_xfer,
-	.functionality		= mantis_i2c_func,
-};
-
-int __devinit mantis_i2c_init(struct mantis_pci *mantis)
-{
-	u32 intstat, intmask;
-	struct i2c_adapter *i2c_adapter = &mantis->adapter;
-	struct pci_dev *pdev		= mantis->pdev;
-
-	init_waitqueue_head(&mantis->i2c_wq);
-	mutex_init(&mantis->i2c_lock);
-	strncpy(i2c_adapter->name, "Mantis I2C", sizeof(i2c_adapter->name));
-	i2c_set_adapdata(i2c_adapter, mantis);
-
-	i2c_adapter->owner	= THIS_MODULE;
-	i2c_adapter->algo	= &mantis_algo;
-	i2c_adapter->algo_data	= NULL;
-	i2c_adapter->timeout	= 500;
-	i2c_adapter->retries	= 3;
-	i2c_adapter->dev.parent	= &pdev->dev;
-
-	mantis->i2c_rc		= i2c_add_adapter(i2c_adapter);
-	if (mantis->i2c_rc < 0)
-		return mantis->i2c_rc;
-
-	dprintk(MANTIS_DEBUG, 1, "Initializing I2C ..");
-
-	intstat = mmread(MANTIS_INT_STAT);
-	intmask = mmread(MANTIS_INT_MASK);
-	mmwrite(intstat, MANTIS_INT_STAT);
-	dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt");
-	intmask = mmread(MANTIS_INT_MASK);
-	mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(mantis_i2c_init);
-
-int mantis_i2c_exit(struct mantis_pci *mantis)
-{
-	u32 intmask;
-
-	dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt");
-	intmask = mmread(MANTIS_INT_MASK);
-	mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK);
-
-	dprintk(MANTIS_DEBUG, 1, "Removing I2C adapter");
-	return i2c_del_adapter(&mantis->adapter);
-}
-EXPORT_SYMBOL_GPL(mantis_i2c_exit);
diff --git a/drivers/media/dvb/mantis/mantis_i2c.h b/drivers/media/dvb/mantis/mantis_i2c.h
deleted file mode 100644
index 1342df2..0000000
--- a/drivers/media/dvb/mantis/mantis_i2c.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MANTIS_I2C_H
-#define __MANTIS_I2C_H
-
-#define I2C_STOP		(1 <<  0)
-#define I2C_READ		(1 <<  1)
-
-extern int mantis_i2c_init(struct mantis_pci *mantis);
-extern int mantis_i2c_exit(struct mantis_pci *mantis);
-
-#endif /* __MANTIS_I2C_H */
diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c
deleted file mode 100644
index db6d54d..0000000
--- a/drivers/media/dvb/mantis/mantis_input.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <media/rc-core.h>
-#include <linux/pci.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "mantis_common.h"
-#include "mantis_reg.h"
-#include "mantis_uart.h"
-
-#define MODULE_NAME "mantis_core"
-#define RC_MAP_MANTIS "rc-mantis"
-
-static struct rc_map_table mantis_ir_table[] = {
-	{ 0x29, KEY_POWER	},
-	{ 0x28, KEY_FAVORITES	},
-	{ 0x30, KEY_TEXT	},
-	{ 0x17, KEY_INFO	}, /* Preview */
-	{ 0x23, KEY_EPG		},
-	{ 0x3b, KEY_F22		}, /* Record List */
-	{ 0x3c, KEY_1		},
-	{ 0x3e, KEY_2		},
-	{ 0x39, KEY_3		},
-	{ 0x36, KEY_4		},
-	{ 0x22, KEY_5		},
-	{ 0x20, KEY_6		},
-	{ 0x32, KEY_7		},
-	{ 0x26, KEY_8		},
-	{ 0x24, KEY_9		},
-	{ 0x2a, KEY_0		},
-
-	{ 0x33, KEY_CANCEL	},
-	{ 0x2c, KEY_BACK	},
-	{ 0x15, KEY_CLEAR	},
-	{ 0x3f, KEY_TAB		},
-	{ 0x10, KEY_ENTER	},
-	{ 0x14, KEY_UP		},
-	{ 0x0d, KEY_RIGHT	},
-	{ 0x0e, KEY_DOWN	},
-	{ 0x11, KEY_LEFT	},
-
-	{ 0x21, KEY_VOLUMEUP	},
-	{ 0x35, KEY_VOLUMEDOWN	},
-	{ 0x3d, KEY_CHANNELDOWN	},
-	{ 0x3a, KEY_CHANNELUP	},
-	{ 0x2e, KEY_RECORD	},
-	{ 0x2b, KEY_PLAY	},
-	{ 0x13, KEY_PAUSE	},
-	{ 0x25, KEY_STOP	},
-
-	{ 0x1f, KEY_REWIND	},
-	{ 0x2d, KEY_FASTFORWARD	},
-	{ 0x1e, KEY_PREVIOUS	}, /* Replay |< */
-	{ 0x1d, KEY_NEXT	}, /* Skip   >| */
-
-	{ 0x0b, KEY_CAMERA	}, /* Capture */
-	{ 0x0f, KEY_LANGUAGE	}, /* SAP */
-	{ 0x18, KEY_MODE	}, /* PIP */
-	{ 0x12, KEY_ZOOM	}, /* Full screen */
-	{ 0x1c, KEY_SUBTITLE	},
-	{ 0x2f, KEY_MUTE	},
-	{ 0x16, KEY_F20		}, /* L/R */
-	{ 0x38, KEY_F21		}, /* Hibernate */
-
-	{ 0x37, KEY_SWITCHVIDEOMODE }, /* A/V */
-	{ 0x31, KEY_AGAIN	}, /* Recall */
-	{ 0x1a, KEY_KPPLUS	}, /* Zoom+ */
-	{ 0x19, KEY_KPMINUS	}, /* Zoom- */
-	{ 0x27, KEY_RED		},
-	{ 0x0C, KEY_GREEN	},
-	{ 0x01, KEY_YELLOW	},
-	{ 0x00, KEY_BLUE	},
-};
-
-static struct rc_map_list ir_mantis_map = {
-	.map = {
-		.scan = mantis_ir_table,
-		.size = ARRAY_SIZE(mantis_ir_table),
-		.rc_type = RC_TYPE_UNKNOWN,
-		.name = RC_MAP_MANTIS,
-	}
-};
-
-int mantis_input_init(struct mantis_pci *mantis)
-{
-	struct rc_dev *dev;
-	int err;
-
-	err = rc_map_register(&ir_mantis_map);
-	if (err)
-		goto out;
-
-	dev = rc_allocate_device();
-	if (!dev) {
-		dprintk(MANTIS_ERROR, 1, "Remote device allocation failed");
-		err = -ENOMEM;
-		goto out_map;
-	}
-
-	sprintf(mantis->input_name, "Mantis %s IR receiver", mantis->hwconfig->model_name);
-	sprintf(mantis->input_phys, "pci-%s/ir0", pci_name(mantis->pdev));
-
-	dev->input_name         = mantis->input_name;
-	dev->input_phys         = mantis->input_phys;
-	dev->input_id.bustype   = BUS_PCI;
-	dev->input_id.vendor    = mantis->vendor_id;
-	dev->input_id.product   = mantis->device_id;
-	dev->input_id.version   = 1;
-	dev->driver_name        = MODULE_NAME;
-	dev->map_name           = RC_MAP_MANTIS;
-	dev->dev.parent         = &mantis->pdev->dev;
-
-	err = rc_register_device(dev);
-	if (err) {
-		dprintk(MANTIS_ERROR, 1, "IR device registration failed, ret = %d", err);
-		goto out_dev;
-	}
-
-	mantis->rc = dev;
-	return 0;
-
-out_dev:
-	rc_free_device(dev);
-out_map:
-	rc_map_unregister(&ir_mantis_map);
-out:
-	return err;
-}
-
-int mantis_exit(struct mantis_pci *mantis)
-{
-	rc_unregister_device(mantis->rc);
-	rc_map_unregister(&ir_mantis_map);
-	return 0;
-}
-
diff --git a/drivers/media/dvb/mantis/mantis_ioc.c b/drivers/media/dvb/mantis/mantis_ioc.c
deleted file mode 100644
index 24fcdc6..0000000
--- a/drivers/media/dvb/mantis/mantis_ioc.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "mantis_common.h"
-#include "mantis_reg.h"
-#include "mantis_ioc.h"
-
-static int read_eeprom_bytes(struct mantis_pci *mantis, u8 reg, u8 *data, u8 length)
-{
-	struct i2c_adapter *adapter = &mantis->adapter;
-	int err;
-	u8 buf = reg;
-
-	struct i2c_msg msg[] = {
-		{ .addr = 0x50, .flags = 0, .buf = &buf, .len = 1 },
-		{ .addr = 0x50, .flags = I2C_M_RD, .buf = data, .len = length },
-	};
-
-	err = i2c_transfer(adapter, msg, 2);
-	if (err < 0) {
-		dprintk(MANTIS_ERROR, 1, "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >",
-			err, data[0], data[1]);
-
-		return err;
-	}
-
-	return 0;
-}
-int mantis_get_mac(struct mantis_pci *mantis)
-{
-	int err;
-	u8 mac_addr[6] = {0};
-
-	err = read_eeprom_bytes(mantis, 0x08, mac_addr, 6);
-	if (err < 0) {
-		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis EEPROM read error <%d>", err);
-
-		return err;
-	}
-
-	dprintk(MANTIS_ERROR, 0, "    MAC Address=[%pM]\n", mac_addr);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(mantis_get_mac);
-
-/* Turn the given bit on or off. */
-void mantis_gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
-{
-	u32 cur;
-
-	dprintk(MANTIS_DEBUG, 1, "Set Bit <%d> to <%d>", bitpos, value);
-	cur = mmread(MANTIS_GPIF_ADDR);
-	if (value)
-		mantis->gpio_status = cur | (1 << bitpos);
-	else
-		mantis->gpio_status = cur & (~(1 << bitpos));
-
-	dprintk(MANTIS_DEBUG, 1, "GPIO Value <%02x>", mantis->gpio_status);
-	mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
-	mmwrite(0x00, MANTIS_GPIF_DOUT);
-}
-EXPORT_SYMBOL_GPL(mantis_gpio_set_bits);
-
-int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl)
-{
-	u32 reg;
-
-	reg = mmread(MANTIS_CONTROL);
-	switch (stream_ctl) {
-	case STREAM_TO_HIF:
-		dprintk(MANTIS_DEBUG, 1, "Set stream to HIF");
-		reg &= 0xff - MANTIS_BYPASS;
-		mmwrite(reg, MANTIS_CONTROL);
-		reg |= MANTIS_BYPASS;
-		mmwrite(reg, MANTIS_CONTROL);
-		break;
-
-	case STREAM_TO_CAM:
-		dprintk(MANTIS_DEBUG, 1, "Set stream to CAM");
-		reg |= MANTIS_BYPASS;
-		mmwrite(reg, MANTIS_CONTROL);
-		reg &= 0xff - MANTIS_BYPASS;
-		mmwrite(reg, MANTIS_CONTROL);
-		break;
-	default:
-		dprintk(MANTIS_ERROR, 1, "Unknown MODE <%02x>", stream_ctl);
-		return -1;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(mantis_stream_control);
diff --git a/drivers/media/dvb/mantis/mantis_ioc.h b/drivers/media/dvb/mantis/mantis_ioc.h
deleted file mode 100644
index d56e002..0000000
--- a/drivers/media/dvb/mantis/mantis_ioc.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MANTIS_IOC_H
-#define __MANTIS_IOC_H
-
-#define GPIF_A00		0x00
-#define GPIF_A01		0x01
-#define GPIF_A02		0x02
-#define GPIF_A03		0x03
-#define GPIF_A04		0x04
-#define GPIF_A05		0x05
-#define GPIF_A06		0x06
-#define GPIF_A07		0x07
-#define GPIF_A08		0x08
-#define GPIF_A09		0x09
-#define GPIF_A10		0x0a
-#define GPIF_A11		0x0b
-
-#define GPIF_A12		0x0c
-#define GPIF_A13		0x0d
-#define GPIF_A14		0x0e
-
-enum mantis_stream_control {
-	STREAM_TO_HIF = 0,
-	STREAM_TO_CAM
-};
-
-extern int mantis_get_mac(struct mantis_pci *mantis);
-extern void mantis_gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value);
-
-extern int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl);
-
-#endif /* __MANTIS_IOC_H */
diff --git a/drivers/media/dvb/mantis/mantis_link.h b/drivers/media/dvb/mantis/mantis_link.h
deleted file mode 100644
index 2a81477..0000000
--- a/drivers/media/dvb/mantis/mantis_link.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MANTIS_LINK_H
-#define __MANTIS_LINK_H
-
-#include <linux/mutex.h>
-#include <linux/workqueue.h>
-#include "dvb_ca_en50221.h"
-
-enum mantis_sbuf_status {
-	MANTIS_SBUF_DATA_AVAIL		= 1,
-	MANTIS_SBUF_DATA_EMPTY		= 2,
-	MANTIS_SBUF_DATA_OVFLW		= 3
-};
-
-struct mantis_slot {
-	u32				timeout;
-	u32				slave_cfg;
-	u32				bar;
-};
-
-/* Physical layer */
-enum mantis_slot_state {
-	MODULE_INSERTED			= 3,
-	MODULE_XTRACTED			= 4
-};
-
-struct mantis_ca {
-	struct mantis_slot		slot[4];
-
-	struct work_struct		hif_evm_work;
-
-	u32				hif_event;
-	wait_queue_head_t		hif_opdone_wq;
-	wait_queue_head_t		hif_brrdyw_wq;
-	wait_queue_head_t		hif_data_wq;
-	wait_queue_head_t		hif_write_wq; /* HIF Write op */
-
-	enum mantis_sbuf_status		sbuf_status;
-
-	enum mantis_slot_state		slot_state;
-
-	void				*ca_priv;
-
-	struct dvb_ca_en50221		en50221;
-	struct mutex			ca_lock;
-};
-
-/* CA */
-extern void mantis_event_cam_plugin(struct mantis_ca *ca);
-extern void mantis_event_cam_unplug(struct mantis_ca *ca);
-extern int mantis_pcmcia_init(struct mantis_ca *ca);
-extern void mantis_pcmcia_exit(struct mantis_ca *ca);
-extern int mantis_evmgr_init(struct mantis_ca *ca);
-extern void mantis_evmgr_exit(struct mantis_ca *ca);
-
-/* HIF */
-extern int mantis_hif_init(struct mantis_ca *ca);
-extern void mantis_hif_exit(struct mantis_ca *ca);
-extern int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr);
-extern int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data);
-extern int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr);
-extern int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data);
-
-#endif /* __MANTIS_LINK_H */
diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c
deleted file mode 100644
index 371558a..0000000
--- a/drivers/media/dvb/mantis/mantis_pci.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <linux/kmod.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/pci.h>
-
-#include <asm/irq.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "mantis_common.h"
-#include "mantis_reg.h"
-#include "mantis_pci.h"
-
-#define DRIVER_NAME		"Mantis Core"
-
-int __devinit mantis_pci_init(struct mantis_pci *mantis)
-{
-	u8 latency;
-	struct mantis_hwconfig *config	= mantis->hwconfig;
-	struct pci_dev *pdev		= mantis->pdev;
-	int err, ret = 0;
-
-	dprintk(MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n",
-		config->model_name,
-		config->dev_type,
-		mantis->pdev->bus->number,
-		PCI_SLOT(mantis->pdev->devfn),
-		PCI_FUNC(mantis->pdev->devfn));
-
-	err = pci_enable_device(pdev);
-	if (err != 0) {
-		ret = -ENODEV;
-		dprintk(MANTIS_ERROR, 1, "ERROR: PCI enable failed <%i>", err);
-		goto fail0;
-	}
-
-	err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
-	if (err != 0) {
-		dprintk(MANTIS_ERROR, 1, "ERROR: Unable to obtain 32 bit DMA <%i>", err);
-		ret = -ENOMEM;
-		goto fail1;
-	}
-
-	pci_set_master(pdev);
-
-	if (!request_mem_region(pci_resource_start(pdev, 0),
-				pci_resource_len(pdev, 0),
-				DRIVER_NAME)) {
-
-		dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 Request failed !");
-		ret = -ENODEV;
-		goto fail1;
-	}
-
-	mantis->mmio = ioremap(pci_resource_start(pdev, 0),
-			       pci_resource_len(pdev, 0));
-
-	if (!mantis->mmio) {
-		dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 remap failed !");
-		ret = -ENODEV;
-		goto fail2;
-	}
-
-	pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency);
-	mantis->latency = latency;
-	mantis->revision = pdev->revision;
-
-	dprintk(MANTIS_ERROR, 0, "    Mantis Rev %d [%04x:%04x], ",
-		mantis->revision,
-		mantis->pdev->subsystem_vendor,
-		mantis->pdev->subsystem_device);
-
-	dprintk(MANTIS_ERROR, 0,
-		"irq: %d, latency: %d\n    memory: 0x%lx, mmio: 0x%p\n",
-		mantis->pdev->irq,
-		mantis->latency,
-		mantis->mantis_addr,
-		mantis->mmio);
-
-	err = request_irq(pdev->irq,
-			  config->irq_handler,
-			  IRQF_SHARED,
-			  DRIVER_NAME,
-			  mantis);
-
-	if (err != 0) {
-
-		dprintk(MANTIS_ERROR, 1, "ERROR: IRQ registration failed ! <%d>", err);
-		ret = -ENODEV;
-		goto fail3;
-	}
-
-	pci_set_drvdata(pdev, mantis);
-	return ret;
-
-	/* Error conditions */
-fail3:
-	dprintk(MANTIS_ERROR, 1, "ERROR: <%d> I/O unmap", ret);
-	if (mantis->mmio)
-		iounmap(mantis->mmio);
-
-fail2:
-	dprintk(MANTIS_ERROR, 1, "ERROR: <%d> releasing regions", ret);
-	release_mem_region(pci_resource_start(pdev, 0),
-			   pci_resource_len(pdev, 0));
-
-fail1:
-	dprintk(MANTIS_ERROR, 1, "ERROR: <%d> disabling device", ret);
-	pci_disable_device(pdev);
-
-fail0:
-	dprintk(MANTIS_ERROR, 1, "ERROR: <%d> exiting", ret);
-	pci_set_drvdata(pdev, NULL);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(mantis_pci_init);
-
-void mantis_pci_exit(struct mantis_pci *mantis)
-{
-	struct pci_dev *pdev = mantis->pdev;
-
-	dprintk(MANTIS_NOTICE, 1, " mem: 0x%p", mantis->mmio);
-	free_irq(pdev->irq, mantis);
-	if (mantis->mmio) {
-		iounmap(mantis->mmio);
-		release_mem_region(pci_resource_start(pdev, 0),
-				   pci_resource_len(pdev, 0));
-	}
-
-	pci_disable_device(pdev);
-	pci_set_drvdata(pdev, NULL);
-}
-EXPORT_SYMBOL_GPL(mantis_pci_exit);
-
-MODULE_DESCRIPTION("Mantis PCI DTV bridge driver");
-MODULE_AUTHOR("Manu Abraham");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/mantis/mantis_pci.h b/drivers/media/dvb/mantis/mantis_pci.h
deleted file mode 100644
index 65f0045..0000000
--- a/drivers/media/dvb/mantis/mantis_pci.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MANTIS_PCI_H
-#define __MANTIS_PCI_H
-
-extern int mantis_pci_init(struct mantis_pci *mantis);
-extern void mantis_pci_exit(struct mantis_pci *mantis);
-
-#endif /* __MANTIS_PCI_H */
diff --git a/drivers/media/dvb/mantis/mantis_pcmcia.c b/drivers/media/dvb/mantis/mantis_pcmcia.c
deleted file mode 100644
index 2f188c0..0000000
--- a/drivers/media/dvb/mantis/mantis_pcmcia.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/kernel.h>
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "mantis_common.h"
-#include "mantis_link.h" /* temporary due to physical layer stuff */
-#include "mantis_reg.h"
-
-/*
- * If Slot state is already PLUG_IN event and we are called
- * again, definitely it is jitter alone
- */
-void mantis_event_cam_plugin(struct mantis_ca *ca)
-{
-	struct mantis_pci *mantis = ca->ca_priv;
-
-	u32 gpif_irqcfg;
-
-	if (ca->slot_state == MODULE_XTRACTED) {
-		dprintk(MANTIS_DEBUG, 1, "Event: CAM Plugged IN: Adapter(%d) Slot(0)", mantis->num);
-		udelay(50);
-		mmwrite(0xda000000, MANTIS_CARD_RESET);
-		gpif_irqcfg  = mmread(MANTIS_GPIF_IRQCFG);
-		gpif_irqcfg |= MANTIS_MASK_PLUGOUT;
-		gpif_irqcfg &= ~MANTIS_MASK_PLUGIN;
-		mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG);
-		udelay(500);
-		ca->slot_state = MODULE_INSERTED;
-	}
-	udelay(100);
-}
-
-/*
- * If Slot state is already UN_PLUG event and we are called
- * again, definitely it is jitter alone
- */
-void mantis_event_cam_unplug(struct mantis_ca *ca)
-{
-	struct mantis_pci *mantis = ca->ca_priv;
-
-	u32 gpif_irqcfg;
-
-	if (ca->slot_state == MODULE_INSERTED) {
-		dprintk(MANTIS_DEBUG, 1, "Event: CAM Unplugged: Adapter(%d) Slot(0)", mantis->num);
-		udelay(50);
-		mmwrite(0x00da0000, MANTIS_CARD_RESET);
-		gpif_irqcfg  = mmread(MANTIS_GPIF_IRQCFG);
-		gpif_irqcfg |= MANTIS_MASK_PLUGIN;
-		gpif_irqcfg &= ~MANTIS_MASK_PLUGOUT;
-		mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG);
-		udelay(500);
-		ca->slot_state = MODULE_XTRACTED;
-	}
-	udelay(100);
-}
-
-int mantis_pcmcia_init(struct mantis_ca *ca)
-{
-	struct mantis_pci *mantis = ca->ca_priv;
-
-	u32 gpif_stat, card_stat;
-
-	mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_IRQ0, MANTIS_INT_MASK);
-	gpif_stat = mmread(MANTIS_GPIF_STATUS);
-	card_stat = mmread(MANTIS_GPIF_IRQCFG);
-
-	if (gpif_stat & MANTIS_GPIF_DETSTAT) {
-		dprintk(MANTIS_DEBUG, 1, "CAM found on Adapter(%d) Slot(0)", mantis->num);
-		mmwrite(card_stat | MANTIS_MASK_PLUGOUT, MANTIS_GPIF_IRQCFG);
-		ca->slot_state = MODULE_INSERTED;
-		dvb_ca_en50221_camchange_irq(&ca->en50221,
-					     0,
-					     DVB_CA_EN50221_CAMCHANGE_INSERTED);
-	} else {
-		dprintk(MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num);
-		mmwrite(card_stat | MANTIS_MASK_PLUGIN, MANTIS_GPIF_IRQCFG);
-		ca->slot_state = MODULE_XTRACTED;
-		dvb_ca_en50221_camchange_irq(&ca->en50221,
-					     0,
-					     DVB_CA_EN50221_CAMCHANGE_REMOVED);
-	}
-
-	return 0;
-}
-
-void mantis_pcmcia_exit(struct mantis_ca *ca)
-{
-	struct mantis_pci *mantis = ca->ca_priv;
-
-	mmwrite(mmread(MANTIS_GPIF_STATUS) & (~MANTIS_CARD_PLUGOUT | ~MANTIS_CARD_PLUGIN), MANTIS_GPIF_STATUS);
-	mmwrite(mmread(MANTIS_INT_MASK) & ~MANTIS_INT_IRQ0, MANTIS_INT_MASK);
-}
diff --git a/drivers/media/dvb/mantis/mantis_reg.h b/drivers/media/dvb/mantis/mantis_reg.h
deleted file mode 100644
index 7761f9d..0000000
--- a/drivers/media/dvb/mantis/mantis_reg.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MANTIS_REG_H
-#define __MANTIS_REG_H
-
-/* Interrupts */
-#define MANTIS_INT_STAT			0x00
-#define MANTIS_INT_MASK			0x04
-
-#define MANTIS_INT_RISCSTAT		(0x0f << 28)
-#define MANTIS_INT_RISCEN		(0x01 << 27)
-#define MANTIS_INT_I2CRACK		(0x01 << 26)
-
-/* #define MANTIS_INT_GPIF			(0xff << 12) */
-
-#define MANTIS_INT_PCMCIA7		(0x01 << 19)
-#define MANTIS_INT_PCMCIA6		(0x01 << 18)
-#define MANTIS_INT_PCMCIA5		(0x01 << 17)
-#define MANTIS_INT_PCMCIA4		(0x01 << 16)
-#define MANTIS_INT_PCMCIA3		(0x01 << 15)
-#define MANTIS_INT_PCMCIA2		(0x01 << 14)
-#define MANTIS_INT_PCMCIA1		(0x01 << 13)
-#define MANTIS_INT_PCMCIA0		(0x01 << 12)
-#define MANTIS_INT_IRQ1			(0x01 << 11)
-#define MANTIS_INT_IRQ0			(0x01 << 10)
-#define MANTIS_INT_OCERR		(0x01 <<  8)
-#define MANTIS_INT_PABORT		(0x01 <<  7)
-#define MANTIS_INT_RIPERR		(0x01 <<  6)
-#define MANTIS_INT_PPERR		(0x01 <<  5)
-#define MANTIS_INT_FTRGT		(0x01 <<  3)
-#define MANTIS_INT_RISCI		(0x01 <<  1)
-#define MANTIS_INT_I2CDONE		(0x01 <<  0)
-
-/* DMA */
-#define MANTIS_DMA_CTL			0x08
-#define MANTIS_GPIF_RD			(0xff << 24)
-#define MANTIS_GPIF_WR			(0xff << 16)
-#define MANTIS_CPU_DO			(0x01 << 10)
-#define MANTIS_DRV_DO			(0x01 <<  9)
-#define	MANTIS_I2C_RD			(0x01 <<  7)
-#define MANTIS_I2C_WR			(0x01 <<  6)
-#define MANTIS_DCAP_MODE		(0x01 <<  5)
-#define MANTIS_FIFO_TP_4		(0x00 <<  3)
-#define MANTIS_FIFO_TP_8		(0x01 <<  3)
-#define MANTIS_FIFO_TP_16		(0x02 <<  3)
-#define MANTIS_FIFO_EN			(0x01 <<  2)
-#define MANTIS_DCAP_EN			(0x01 <<  1)
-#define MANTIS_RISC_EN			(0x01 <<  0)
-
-/* DEBUG */
-#define MANTIS_DEBUGREG			0x0c
-#define MANTIS_DATINV			(0x0e <<  7)
-#define MANTIS_TOP_DEBUGSEL		(0x07 <<  4)
-#define MANTIS_PCMCIA_DEBUGSEL		(0x0f <<  0)
-
-#define MANTIS_RISC_START		0x10
-#define MANTIS_RISC_PC			0x14
-
-/* I2C */
-#define MANTIS_I2CDATA_CTL		0x18
-#define MANTIS_I2C_RATE_1		(0x00 <<  6)
-#define MANTIS_I2C_RATE_2		(0x01 <<  6)
-#define MANTIS_I2C_RATE_3		(0x02 <<  6)
-#define MANTIS_I2C_RATE_4		(0x03 <<  6)
-#define MANTIS_I2C_STOP			(0x01 <<  5)
-#define MANTIS_I2C_PGMODE		(0x01 <<  3)
-
-/* DATA */
-#define MANTIS_CMD_DATA_R1		0x20
-#define MANTIS_CMD_DATA_3		(0xff << 24)
-#define MANTIS_CMD_DATA_2		(0xff << 16)
-#define MANTIS_CMD_DATA_1		(0xff <<  8)
-#define MANTIS_CMD_DATA_0		(0xff <<  0)
-
-#define MANTIS_CMD_DATA_R2		0x24
-#define MANTIS_CMD_DATA_7		(0xff << 24)
-#define MANTIS_CMD_DATA_6		(0xff << 16)
-#define MANTIS_CMD_DATA_5		(0xff <<  8)
-#define MANTIS_CMD_DATA_4		(0xff <<  0)
-
-#define MANTIS_CONTROL			0x28
-#define MANTIS_DET			(0x01 <<  7)
-#define MANTIS_DAT_CF_EN		(0x01 <<  6)
-#define MANTIS_ACS			(0x03 <<  4)
-#define MANTIS_VCCEN			(0x01 <<  3)
-#define MANTIS_BYPASS			(0x01 <<  2)
-#define MANTIS_MRST			(0x01 <<  1)
-#define MANTIS_CRST_INT			(0x01 <<  0)
-
-#define MANTIS_GPIF_CFGSLA		0x84
-#define MANTIS_GPIF_WAITSMPL		(0x07 << 28)
-#define MANTIS_GPIF_BYTEADDRSUB		(0x01 << 25)
-#define MANTIS_GPIF_WAITPOL		(0x01 << 24)
-#define MANTIS_GPIF_NCDELAY		(0x07 << 20)
-#define MANTIS_GPIF_RW2CSDELAY		(0x07 << 16)
-#define MANTIS_GPIF_SLFTIMEDMODE	(0x01 << 15)
-#define MANTIS_GPIF_SLFTIMEDDELY	(0x7f <<  8)
-#define MANTIS_GPIF_DEVTYPE		(0x07 <<  4)
-#define MANTIS_GPIF_BIGENDIAN		(0x01 <<  3)
-#define MANTIS_GPIF_FETCHCMD		(0x03 <<  1)
-#define MANTIS_GPIF_HWORDDEV		(0x01 <<  0)
-
-#define MANTIS_GPIF_WSTOPER		0x90
-#define MANTIS_GPIF_WSTOPERWREN3	(0x01 << 31)
-#define MANTIS_GPIF_PARBOOTN		(0x01 << 29)
-#define MANTIS_GPIF_WSTOPERSLID3	(0x1f << 24)
-#define MANTIS_GPIF_WSTOPERWREN2	(0x01 << 23)
-#define MANTIS_GPIF_WSTOPERSLID2	(0x1f << 16)
-#define MANTIS_GPIF_WSTOPERWREN1	(0x01 << 15)
-#define MANTIS_GPIF_WSTOPERSLID1	(0x1f <<  8)
-#define MANTIS_GPIF_WSTOPERWREN0	(0x01 <<  7)
-#define MANTIS_GPIF_WSTOPERSLID0	(0x1f <<  0)
-
-#define MANTIS_GPIF_CS2RW		0x94
-#define MANTIS_GPIF_CS2RWWREN3		(0x01 << 31)
-#define MANTIS_GPIF_CS2RWDELY3		(0x3f << 24)
-#define MANTIS_GPIF_CS2RWWREN2		(0x01 << 23)
-#define MANTIS_GPIF_CS2RWDELY2		(0x3f << 16)
-#define MANTIS_GPIF_CS2RWWREN1		(0x01 << 15)
-#define MANTIS_GPIF_CS2RWDELY1		(0x3f <<  8)
-#define MANTIS_GPIF_CS2RWWREN0		(0x01 <<  7)
-#define MANTIS_GPIF_CS2RWDELY0		(0x3f <<  0)
-
-#define MANTIS_GPIF_IRQCFG		0x98
-#define MANTIS_GPIF_IRQPOL		(0x01 <<  8)
-#define MANTIS_MASK_WRACK		(0x01 <<  7)
-#define MANTIS_MASK_BRRDY		(0x01 <<  6)
-#define MANTIS_MASK_OVFLW		(0x01 <<  5)
-#define MANTIS_MASK_OTHERR		(0x01 <<  4)
-#define MANTIS_MASK_WSTO		(0x01 <<  3)
-#define MANTIS_MASK_EXTIRQ		(0x01 <<  2)
-#define MANTIS_MASK_PLUGIN		(0x01 <<  1)
-#define MANTIS_MASK_PLUGOUT		(0x01 <<  0)
-
-#define MANTIS_GPIF_STATUS		0x9c
-#define MANTIS_SBUF_KILLOP		(0x01 << 15)
-#define MANTIS_SBUF_OPDONE		(0x01 << 14)
-#define MANTIS_SBUF_EMPTY		(0x01 << 13)
-#define MANTIS_GPIF_DETSTAT		(0x01 <<  9)
-#define MANTIS_GPIF_INTSTAT		(0x01 <<  8)
-#define MANTIS_GPIF_WRACK		(0x01 <<  7)
-#define MANTIS_GPIF_BRRDY		(0x01 <<  6)
-#define MANTIS_SBUF_OVFLW		(0x01 <<  5)
-#define MANTIS_GPIF_OTHERR		(0x01 <<  4)
-#define MANTIS_SBUF_WSTO		(0x01 <<  3)
-#define MANTIS_GPIF_EXTIRQ		(0x01 <<  2)
-#define MANTIS_CARD_PLUGIN		(0x01 <<  1)
-#define MANTIS_CARD_PLUGOUT		(0x01 <<  0)
-
-#define MANTIS_GPIF_BRADDR		0xa0
-#define MANTIS_GPIF_PCMCIAREG		(0x01 		<< 27)
-#define MANTIS_GPIF_PCMCIAIOM		(0x01 		<< 26)
-#define MANTIS_GPIF_BR_ADDR		(0xfffffff	<<  0)
-
-#define MANTIS_GPIF_BRBYTES		0xa4
-#define MANTIS_GPIF_BRCNT		(0xfff 		<<  0)
-
-#define MANTIS_PCMCIA_RESET		0xa8
-#define MANTIS_PCMCIA_RSTVAL		(0xff << 0)
-
-#define MANTIS_CARD_RESET		0xac
-
-#define MANTIS_GPIF_ADDR		0xb0
-#define MANTIS_GPIF_HIFRDWRN		(0x01		<< 31)
-#define MANTIS_GPIF_PCMCIAREG		(0x01		<< 27)
-#define MANTIS_GPIF_PCMCIAIOM		(0x01		<< 26)
-#define MANTIS_GPIF_HIFADDR		(0xfffffff	<<  0)
-
-#define MANTIS_GPIF_DOUT		0xb4
-#define MANTIS_GPIF_HIFDOUT		(0xfffffff	<<  0)
-
-#define MANTIS_GPIF_DIN			0xb8
-#define MANTIS_GPIF_HIFDIN		(0xfffffff	<<  0)
-
-#define MANTIS_GPIF_SPARE		0xbc
-#define MANTIS_GPIF_LOGICRD		(0xffff		<< 16)
-#define MANTIS_GPIF_LOGICRW		(0xffff		<<  0)
-
-#endif /* __MANTIS_REG_H */
diff --git a/drivers/media/dvb/mantis/mantis_uart.c b/drivers/media/dvb/mantis/mantis_uart.c
deleted file mode 100644
index 85e9778..0000000
--- a/drivers/media/dvb/mantis/mantis_uart.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <asm/io.h>
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "mantis_common.h"
-#include "mantis_reg.h"
-#include "mantis_uart.h"
-
-struct mantis_uart_params {
-	enum mantis_baud	baud_rate;
-	enum mantis_parity	parity;
-};
-
-static struct {
-	char string[7];
-} rates[5] = {
-	{ "9600" },
-	{ "19200" },
-	{ "38400" },
-	{ "57600" },
-	{ "115200" }
-};
-
-static struct {
-	char string[5];
-} parity[3] = {
-	{ "NONE" },
-	{ "ODD" },
-	{ "EVEN" }
-};
-
-#define UART_MAX_BUF			16
-
-int mantis_uart_read(struct mantis_pci *mantis, u8 *data)
-{
-	struct mantis_hwconfig *config = mantis->hwconfig;
-	u32 stat = 0, i;
-
-	/* get data */
-	for (i = 0; i < (config->bytes + 1); i++) {
-
-		stat = mmread(MANTIS_UART_STAT);
-
-		if (stat & MANTIS_UART_RXFIFO_FULL) {
-			dprintk(MANTIS_ERROR, 1, "RX Fifo FULL");
-		}
-		data[i] = mmread(MANTIS_UART_RXD) & 0x3f;
-
-		dprintk(MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f);
-
-		if (data[i] & (1 << 7)) {
-			dprintk(MANTIS_ERROR, 1, "UART framing error");
-			return -EINVAL;
-		}
-		if (data[i] & (1 << 6)) {
-			dprintk(MANTIS_ERROR, 1, "UART parity error");
-			return -EINVAL;
-		}
-	}
-
-	return 0;
-}
-
-static void mantis_uart_work(struct work_struct *work)
-{
-	struct mantis_pci *mantis = container_of(work, struct mantis_pci, uart_work);
-	struct mantis_hwconfig *config = mantis->hwconfig;
-	u8 buf[16];
-	int i;
-
-	mantis_uart_read(mantis, buf);
-
-	for (i = 0; i < (config->bytes + 1); i++)
-		dprintk(MANTIS_INFO, 1, "UART BUF:%d <%02x> ", i, buf[i]);
-
-	dprintk(MANTIS_DEBUG, 0, "\n");
-}
-
-static int mantis_uart_setup(struct mantis_pci *mantis,
-			     struct mantis_uart_params *params)
-{
-	u32 reg;
-
-	mmwrite((mmread(MANTIS_UART_CTL) | (params->parity & 0x3)), MANTIS_UART_CTL);
-
-	reg = mmread(MANTIS_UART_BAUD);
-
-	switch (params->baud_rate) {
-	case MANTIS_BAUD_9600:
-		reg |= 0xd8;
-		break;
-	case MANTIS_BAUD_19200:
-		reg |= 0x6c;
-		break;
-	case MANTIS_BAUD_38400:
-		reg |= 0x36;
-		break;
-	case MANTIS_BAUD_57600:
-		reg |= 0x23;
-		break;
-	case MANTIS_BAUD_115200:
-		reg |= 0x11;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	mmwrite(reg, MANTIS_UART_BAUD);
-
-	return 0;
-}
-
-int mantis_uart_init(struct mantis_pci *mantis)
-{
-	struct mantis_hwconfig *config = mantis->hwconfig;
-	struct mantis_uart_params params;
-
-	/* default parity: */
-	params.baud_rate = config->baud_rate;
-	params.parity = config->parity;
-	dprintk(MANTIS_INFO, 1, "Initializing UART @ %sbps parity:%s",
-		rates[params.baud_rate].string,
-		parity[params.parity].string);
-
-	init_waitqueue_head(&mantis->uart_wq);
-	spin_lock_init(&mantis->uart_lock);
-
-	INIT_WORK(&mantis->uart_work, mantis_uart_work);
-
-	/* disable interrupt */
-	mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
-
-	mantis_uart_setup(mantis, &params);
-
-	/* default 1 byte */
-	mmwrite((mmread(MANTIS_UART_BAUD) | (config->bytes << 8)), MANTIS_UART_BAUD);
-
-	/* flush buffer */
-	mmwrite((mmread(MANTIS_UART_CTL) | MANTIS_UART_RXFLUSH), MANTIS_UART_CTL);
-
-	/* enable interrupt */
-	mmwrite(mmread(MANTIS_INT_MASK) | 0x800, MANTIS_INT_MASK);
-	mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL);
-
-	schedule_work(&mantis->uart_work);
-	dprintk(MANTIS_DEBUG, 1, "UART successfully initialized");
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(mantis_uart_init);
-
-void mantis_uart_exit(struct mantis_pci *mantis)
-{
-	/* disable interrupt */
-	mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
-	flush_work(&mantis->uart_work);
-}
-EXPORT_SYMBOL_GPL(mantis_uart_exit);
diff --git a/drivers/media/dvb/mantis/mantis_uart.h b/drivers/media/dvb/mantis/mantis_uart.h
deleted file mode 100644
index ffb62a0..0000000
--- a/drivers/media/dvb/mantis/mantis_uart.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MANTIS_UART_H
-#define __MANTIS_UART_H
-
-#define MANTIS_UART_CTL			0xe0
-#define MANTIS_UART_RXINT		(1 << 4)
-#define MANTIS_UART_RXFLUSH		(1 << 2)
-
-#define MANTIS_UART_RXD			0xe8
-#define MANTIS_UART_BAUD		0xec
-
-#define MANTIS_UART_STAT		0xf0
-#define MANTIS_UART_RXFIFO_DATA		(1 << 7)
-#define MANTIS_UART_RXFIFO_EMPTY	(1 << 6)
-#define MANTIS_UART_RXFIFO_FULL		(1 << 3)
-#define MANTIS_UART_FRAME_ERR		(1 << 2)
-#define MANTIS_UART_PARITY_ERR		(1 << 1)
-#define MANTIS_UART_RXTHRESH_INT	(1 << 0)
-
-enum mantis_baud {
-	MANTIS_BAUD_9600	= 0,
-	MANTIS_BAUD_19200,
-	MANTIS_BAUD_38400,
-	MANTIS_BAUD_57600,
-	MANTIS_BAUD_115200
-};
-
-enum mantis_parity {
-	MANTIS_PARITY_NONE	= 0,
-	MANTIS_PARITY_EVEN,
-	MANTIS_PARITY_ODD,
-};
-
-struct mantis_pci;
-
-extern int mantis_uart_init(struct mantis_pci *mantis);
-extern void mantis_uart_exit(struct mantis_pci *mantis);
-
-#endif /* __MANTIS_UART_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/dvb/mantis/mantis_vp1033.c
deleted file mode 100644
index ad013e9..0000000
--- a/drivers/media/dvb/mantis/mantis_vp1033.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
-	Mantis VP-1033 driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "stv0299.h"
-#include "mantis_common.h"
-#include "mantis_ioc.h"
-#include "mantis_dvb.h"
-#include "mantis_vp1033.h"
-#include "mantis_reg.h"
-
-u8 lgtdqcs001f_inittab[] = {
-	0x01, 0x15,
-	0x02, 0x30,
-	0x03, 0x00,
-	0x04, 0x2a,
-	0x05, 0x85,
-	0x06, 0x02,
-	0x07, 0x00,
-	0x08, 0x00,
-	0x0c, 0x01,
-	0x0d, 0x81,
-	0x0e, 0x44,
-	0x0f, 0x94,
-	0x10, 0x3c,
-	0x11, 0x84,
-	0x12, 0xb9,
-	0x13, 0xb5,
-	0x14, 0x4f,
-	0x15, 0xc9,
-	0x16, 0x80,
-	0x17, 0x36,
-	0x18, 0xfb,
-	0x19, 0xcf,
-	0x1a, 0xbc,
-	0x1c, 0x2b,
-	0x1d, 0x27,
-	0x1e, 0x00,
-	0x1f, 0x0b,
-	0x20, 0xa1,
-	0x21, 0x60,
-	0x22, 0x00,
-	0x23, 0x00,
-	0x28, 0x00,
-	0x29, 0x28,
-	0x2a, 0x14,
-	0x2b, 0x0f,
-	0x2c, 0x09,
-	0x2d, 0x05,
-	0x31, 0x1f,
-	0x32, 0x19,
-	0x33, 0xfc,
-	0x34, 0x13,
-	0xff, 0xff,
-};
-
-#define MANTIS_MODEL_NAME	"VP-1033"
-#define MANTIS_DEV_TYPE		"DVB-S/DSS"
-
-int lgtdqcs001f_tuner_set(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct mantis_pci *mantis	= fe->dvb->priv;
-	struct i2c_adapter *adapter	= &mantis->adapter;
-
-	u8 buf[4];
-	u32 div;
-
-
-	struct i2c_msg msg = {.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf)};
-
-	div = p->frequency / 250;
-
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] =  div & 0xff;
-	buf[2] =  0x83;
-	buf[3] =  0xc0;
-
-	if (p->frequency < 1531000)
-		buf[3] |= 0x04;
-	else
-		buf[3] &= ~0x04;
-	if (i2c_transfer(adapter, &msg, 1) < 0) {
-		dprintk(MANTIS_ERROR, 1, "Write: I2C Transfer failed");
-		return -EIO;
-	}
-	msleep_interruptible(100);
-
-	return 0;
-}
-
-int lgtdqcs001f_set_symbol_rate(struct dvb_frontend *fe,
-				u32 srate, u32 ratio)
-{
-	u8 aclk = 0;
-	u8 bclk = 0;
-
-	if (srate < 1500000) {
-		aclk = 0xb7;
-		bclk = 0x47;
-	} else if (srate < 3000000) {
-		aclk = 0xb7;
-		bclk = 0x4b;
-	} else if (srate < 7000000) {
-		aclk = 0xb7;
-		bclk = 0x4f;
-	} else if (srate < 14000000) {
-		aclk = 0xb7;
-		bclk = 0x53;
-	} else if (srate < 30000000) {
-		aclk = 0xb6;
-		bclk = 0x53;
-	} else if (srate < 45000000) {
-		aclk = 0xb4;
-		bclk = 0x51;
-	}
-	stv0299_writereg(fe, 0x13, aclk);
-	stv0299_writereg(fe, 0x14, bclk);
-
-	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
-	stv0299_writereg(fe, 0x20, (ratio >>  8) & 0xff);
-	stv0299_writereg(fe, 0x21,  ratio & 0xf0);
-
-	return 0;
-}
-
-struct stv0299_config lgtdqcs001f_config = {
-	.demod_address		= 0x68,
-	.inittab		= lgtdqcs001f_inittab,
-	.mclk			= 88000000UL,
-	.invert			= 0,
-	.skip_reinit		= 0,
-	.volt13_op0_op1		= STV0299_VOLT13_OP0,
-	.min_delay_ms		= 100,
-	.set_symbol_rate	= lgtdqcs001f_set_symbol_rate,
-};
-
-static int vp1033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
-{
-	struct i2c_adapter *adapter	= &mantis->adapter;
-
-	int err = 0;
-
-	err = mantis_frontend_power(mantis, POWER_ON);
-	if (err == 0) {
-		mantis_frontend_soft_reset(mantis);
-		msleep(250);
-
-		dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)");
-		fe = dvb_attach(stv0299_attach, &lgtdqcs001f_config, adapter);
-
-		if (fe) {
-			fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set;
-			dprintk(MANTIS_ERROR, 1, "found STV0299 DVB-S frontend @ 0x%02x",
-				lgtdqcs001f_config.demod_address);
-
-			dprintk(MANTIS_ERROR, 1, "Mantis DVB-S STV0299 frontend attach success");
-		} else {
-			return -1;
-		}
-	} else {
-		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
-			adapter->name,
-			err);
-
-		return -EIO;
-	}
-	mantis->fe = fe;
-	dprintk(MANTIS_ERROR, 1, "Done!");
-
-	return 0;
-}
-
-struct mantis_hwconfig vp1033_config = {
-	.model_name		= MANTIS_MODEL_NAME,
-	.dev_type		= MANTIS_DEV_TYPE,
-	.ts_size		= MANTIS_TS_204,
-
-	.baud_rate		= MANTIS_BAUD_9600,
-	.parity			= MANTIS_PARITY_NONE,
-	.bytes			= 0,
-
-	.frontend_init		= vp1033_frontend_init,
-	.power			= GPIF_A12,
-	.reset			= GPIF_A13,
-};
diff --git a/drivers/media/dvb/mantis/mantis_vp1033.h b/drivers/media/dvb/mantis/mantis_vp1033.h
deleted file mode 100644
index 7daaa1b..0000000
--- a/drivers/media/dvb/mantis/mantis_vp1033.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
-	Mantis VP-1033 driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MANTIS_VP1033_H
-#define __MANTIS_VP1033_H
-
-#include "mantis_common.h"
-
-#define MANTIS_VP_1033_DVB_S	0x0016
-
-extern struct mantis_hwconfig vp1033_config;
-
-#endif /* __MANTIS_VP1033_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/dvb/mantis/mantis_vp1034.c
deleted file mode 100644
index 430ae84..0000000
--- a/drivers/media/dvb/mantis/mantis_vp1034.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
-	Mantis VP-1034 driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "mb86a16.h"
-#include "mantis_common.h"
-#include "mantis_ioc.h"
-#include "mantis_dvb.h"
-#include "mantis_vp1034.h"
-#include "mantis_reg.h"
-
-struct mb86a16_config vp1034_mb86a16_config = {
-	.demod_address	= 0x08,
-	.set_voltage	= vp1034_set_voltage,
-};
-
-#define MANTIS_MODEL_NAME	"VP-1034"
-#define MANTIS_DEV_TYPE		"DVB-S/DSS"
-
-int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-{
-	struct mantis_pci *mantis = fe->dvb->priv;
-
-	switch (voltage) {
-	case SEC_VOLTAGE_13:
-		dprintk(MANTIS_ERROR, 1, "Polarization=[13V]");
-		mantis_gpio_set_bits(mantis, 13, 1);
-		mantis_gpio_set_bits(mantis, 14, 0);
-		break;
-	case SEC_VOLTAGE_18:
-		dprintk(MANTIS_ERROR, 1, "Polarization=[18V]");
-		mantis_gpio_set_bits(mantis, 13, 1);
-		mantis_gpio_set_bits(mantis, 14, 1);
-		break;
-	case SEC_VOLTAGE_OFF:
-		dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN");
-		break;
-	default:
-		dprintk(MANTIS_ERROR, 1, "Invalid = (%d)", (u32) voltage);
-		return -EINVAL;
-	}
-	mmwrite(0x00, MANTIS_GPIF_DOUT);
-
-	return 0;
-}
-
-static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
-{
-	struct i2c_adapter *adapter	= &mantis->adapter;
-
-	int err = 0;
-
-	err = mantis_frontend_power(mantis, POWER_ON);
-	if (err == 0) {
-		mantis_frontend_soft_reset(mantis);
-		msleep(250);
-
-		dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)");
-		fe = dvb_attach(mb86a16_attach, &vp1034_mb86a16_config, adapter);
-		if (fe) {
-			dprintk(MANTIS_ERROR, 1,
-			"found MB86A16 DVB-S/DSS frontend @0x%02x",
-			vp1034_mb86a16_config.demod_address);
-
-		} else {
-			return -1;
-		}
-	} else {
-		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
-			adapter->name,
-			err);
-
-		return -EIO;
-	}
-	mantis->fe = fe;
-	dprintk(MANTIS_ERROR, 1, "Done!");
-
-	return 0;
-}
-
-struct mantis_hwconfig vp1034_config = {
-	.model_name	= MANTIS_MODEL_NAME,
-	.dev_type	= MANTIS_DEV_TYPE,
-	.ts_size	= MANTIS_TS_204,
-
-	.baud_rate	= MANTIS_BAUD_9600,
-	.parity		= MANTIS_PARITY_NONE,
-	.bytes		= 0,
-
-	.frontend_init	= vp1034_frontend_init,
-	.power		= GPIF_A12,
-	.reset		= GPIF_A13,
-};
diff --git a/drivers/media/dvb/mantis/mantis_vp1034.h b/drivers/media/dvb/mantis/mantis_vp1034.h
deleted file mode 100644
index 323f38e..0000000
--- a/drivers/media/dvb/mantis/mantis_vp1034.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
-	Mantis VP-1034 driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MANTIS_VP1034_H
-#define __MANTIS_VP1034_H
-
-#include "dvb_frontend.h"
-#include "mantis_common.h"
-
-
-#define MANTIS_VP_1034_DVB_S	0x0014
-
-extern struct mantis_hwconfig vp1034_config;
-extern int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage);
-
-#endif /* __MANTIS_VP1034_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c
deleted file mode 100644
index 07aa887..0000000
--- a/drivers/media/dvb/mantis/mantis_vp1041.c
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
-	Mantis VP-1041 driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "mantis_common.h"
-#include "mantis_ioc.h"
-#include "mantis_dvb.h"
-#include "mantis_vp1041.h"
-#include "stb0899_reg.h"
-#include "stb0899_drv.h"
-#include "stb0899_cfg.h"
-#include "stb6100_cfg.h"
-#include "stb6100.h"
-#include "lnbp21.h"
-
-#define MANTIS_MODEL_NAME	"VP-1041"
-#define MANTIS_DEV_TYPE		"DSS/DVB-S/DVB-S2"
-
-static const struct stb0899_s1_reg vp1041_stb0899_s1_init_1[] = {
-
-	/* 0x0000000b, *//* SYSREG */
-	{ STB0899_DEV_ID		, 0x30 },
-	{ STB0899_DISCNTRL1		, 0x32 },
-	{ STB0899_DISCNTRL2     	, 0x80 },
-	{ STB0899_DISRX_ST0     	, 0x04 },
-	{ STB0899_DISRX_ST1     	, 0x00 },
-	{ STB0899_DISPARITY     	, 0x00 },
-	{ STB0899_DISSTATUS		, 0x20 },
-	{ STB0899_DISF22        	, 0x99 },
-	{ STB0899_DISF22RX      	, 0xa8 },
-	/* SYSREG ? */
-	{ STB0899_ACRPRESC      	, 0x11 },
-	{ STB0899_ACRDIV1       	, 0x0a },
-	{ STB0899_ACRDIV2       	, 0x05 },
-	{ STB0899_DACR1         	, 0x00 },
-	{ STB0899_DACR2         	, 0x00 },
-	{ STB0899_OUTCFG        	, 0x00 },
-	{ STB0899_MODECFG       	, 0x00 },
-	{ STB0899_IRQSTATUS_3		, 0xfe },
-	{ STB0899_IRQSTATUS_2		, 0x03 },
-	{ STB0899_IRQSTATUS_1		, 0x7c },
-	{ STB0899_IRQSTATUS_0		, 0xf4 },
-	{ STB0899_IRQMSK_3      	, 0xf3 },
-	{ STB0899_IRQMSK_2      	, 0xfc },
-	{ STB0899_IRQMSK_1      	, 0xff },
-	{ STB0899_IRQMSK_0		, 0xff },
-	{ STB0899_IRQCFG		, 0x00 },
-	{ STB0899_I2CCFG        	, 0x88 },
-	{ STB0899_I2CRPT        	, 0x58 },
-	{ STB0899_IOPVALUE5		, 0x00 },
-	{ STB0899_IOPVALUE4		, 0x33 },
-	{ STB0899_IOPVALUE3		, 0x6d },
-	{ STB0899_IOPVALUE2		, 0x90 },
-	{ STB0899_IOPVALUE1		, 0x60 },
-	{ STB0899_IOPVALUE0		, 0x00 },
-	{ STB0899_GPIO00CFG     	, 0x82 },
-	{ STB0899_GPIO01CFG     	, 0x82 },
-	{ STB0899_GPIO02CFG     	, 0x82 },
-	{ STB0899_GPIO03CFG     	, 0x82 },
-	{ STB0899_GPIO04CFG     	, 0x82 },
-	{ STB0899_GPIO05CFG     	, 0x82 },
-	{ STB0899_GPIO06CFG     	, 0x82 },
-	{ STB0899_GPIO07CFG     	, 0x82 },
-	{ STB0899_GPIO08CFG     	, 0x82 },
-	{ STB0899_GPIO09CFG     	, 0x82 },
-	{ STB0899_GPIO10CFG     	, 0x82 },
-	{ STB0899_GPIO11CFG     	, 0x82 },
-	{ STB0899_GPIO12CFG     	, 0x82 },
-	{ STB0899_GPIO13CFG     	, 0x82 },
-	{ STB0899_GPIO14CFG     	, 0x82 },
-	{ STB0899_GPIO15CFG     	, 0x82 },
-	{ STB0899_GPIO16CFG     	, 0x82 },
-	{ STB0899_GPIO17CFG     	, 0x82 },
-	{ STB0899_GPIO18CFG     	, 0x82 },
-	{ STB0899_GPIO19CFG     	, 0x82 },
-	{ STB0899_GPIO20CFG     	, 0x82 },
-	{ STB0899_SDATCFG       	, 0xb8 },
-	{ STB0899_SCLTCFG       	, 0xba },
-	{ STB0899_AGCRFCFG      	, 0x1c }, /* 0x11 */
-	{ STB0899_GPIO22        	, 0x82 }, /* AGCBB2CFG */
-	{ STB0899_GPIO21        	, 0x91 }, /* AGCBB1CFG */
-	{ STB0899_DIRCLKCFG     	, 0x82 },
-	{ STB0899_CLKOUT27CFG   	, 0x7e },
-	{ STB0899_STDBYCFG      	, 0x82 },
-	{ STB0899_CS0CFG        	, 0x82 },
-	{ STB0899_CS1CFG        	, 0x82 },
-	{ STB0899_DISEQCOCFG    	, 0x20 },
-	{ STB0899_GPIO32CFG		, 0x82 },
-	{ STB0899_GPIO33CFG		, 0x82 },
-	{ STB0899_GPIO34CFG		, 0x82 },
-	{ STB0899_GPIO35CFG		, 0x82 },
-	{ STB0899_GPIO36CFG		, 0x82 },
-	{ STB0899_GPIO37CFG		, 0x82 },
-	{ STB0899_GPIO38CFG		, 0x82 },
-	{ STB0899_GPIO39CFG		, 0x82 },
-	{ STB0899_NCOARSE       	, 0x17 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */
-	{ STB0899_SYNTCTRL      	, 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */
-	{ STB0899_FILTCTRL      	, 0x00 },
-	{ STB0899_SYSCTRL       	, 0x01 },
-	{ STB0899_STOPCLK1      	, 0x20 },
-	{ STB0899_STOPCLK2      	, 0x00 },
-	{ STB0899_INTBUFSTATUS		, 0x00 },
-	{ STB0899_INTBUFCTRL    	, 0x0a },
-	{ 0xffff			, 0xff },
-};
-
-static const struct stb0899_s1_reg vp1041_stb0899_s1_init_3[] = {
-	{ STB0899_DEMOD         	, 0x00 },
-	{ STB0899_RCOMPC        	, 0xc9 },
-	{ STB0899_AGC1CN        	, 0x01 },
-	{ STB0899_AGC1REF       	, 0x10 },
-	{ STB0899_RTC			, 0x23 },
-	{ STB0899_TMGCFG        	, 0x4e },
-	{ STB0899_AGC2REF       	, 0x34 },
-	{ STB0899_TLSR          	, 0x84 },
-	{ STB0899_CFD           	, 0xf7 },
-	{ STB0899_ACLC			, 0x87 },
-	{ STB0899_BCLC          	, 0x94 },
-	{ STB0899_EQON          	, 0x41 },
-	{ STB0899_LDT           	, 0xf1 },
-	{ STB0899_LDT2          	, 0xe3 },
-	{ STB0899_EQUALREF      	, 0xb4 },
-	{ STB0899_TMGRAMP       	, 0x10 },
-	{ STB0899_TMGTHD        	, 0x30 },
-	{ STB0899_IDCCOMP		, 0xfd },
-	{ STB0899_QDCCOMP		, 0xff },
-	{ STB0899_POWERI		, 0x0c },
-	{ STB0899_POWERQ		, 0x0f },
-	{ STB0899_RCOMP			, 0x6c },
-	{ STB0899_AGCIQIN		, 0x80 },
-	{ STB0899_AGC2I1		, 0x06 },
-	{ STB0899_AGC2I2		, 0x00 },
-	{ STB0899_TLIR			, 0x30 },
-	{ STB0899_RTF			, 0x7f },
-	{ STB0899_DSTATUS		, 0x00 },
-	{ STB0899_LDI			, 0xbc },
-	{ STB0899_CFRM			, 0xea },
-	{ STB0899_CFRL			, 0x31 },
-	{ STB0899_NIRM			, 0x2b },
-	{ STB0899_NIRL			, 0x80 },
-	{ STB0899_ISYMB			, 0x1d },
-	{ STB0899_QSYMB			, 0xa6 },
-	{ STB0899_SFRH          	, 0x2f },
-	{ STB0899_SFRM          	, 0x68 },
-	{ STB0899_SFRL          	, 0x40 },
-	{ STB0899_SFRUPH        	, 0x2f },
-	{ STB0899_SFRUPM        	, 0x68 },
-	{ STB0899_SFRUPL        	, 0x40 },
-	{ STB0899_EQUAI1		, 0x02 },
-	{ STB0899_EQUAQ1		, 0xff },
-	{ STB0899_EQUAI2		, 0x04 },
-	{ STB0899_EQUAQ2		, 0x05 },
-	{ STB0899_EQUAI3		, 0x02 },
-	{ STB0899_EQUAQ3		, 0xfd },
-	{ STB0899_EQUAI4		, 0x03 },
-	{ STB0899_EQUAQ4		, 0x07 },
-	{ STB0899_EQUAI5		, 0x08 },
-	{ STB0899_EQUAQ5		, 0xf5 },
-	{ STB0899_DSTATUS2		, 0x00 },
-	{ STB0899_VSTATUS       	, 0x00 },
-	{ STB0899_VERROR		, 0x86 },
-	{ STB0899_IQSWAP		, 0x2a },
-	{ STB0899_ECNT1M		, 0x00 },
-	{ STB0899_ECNT1L		, 0x00 },
-	{ STB0899_ECNT2M		, 0x00 },
-	{ STB0899_ECNT2L		, 0x00 },
-	{ STB0899_ECNT3M		, 0x0a },
-	{ STB0899_ECNT3L		, 0xad },
-	{ STB0899_FECAUTO1      	, 0x06 },
-	{ STB0899_FECM			, 0x01 },
-	{ STB0899_VTH12         	, 0xb0 },
-	{ STB0899_VTH23         	, 0x7a },
-	{ STB0899_VTH34			, 0x58 },
-	{ STB0899_VTH56         	, 0x38 },
-	{ STB0899_VTH67         	, 0x34 },
-	{ STB0899_VTH78         	, 0x24 },
-	{ STB0899_PRVIT         	, 0xff },
-	{ STB0899_VITSYNC       	, 0x19 },
-	{ STB0899_RSULC         	, 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
-	{ STB0899_TSULC         	, 0x42 },
-	{ STB0899_RSLLC         	, 0x41 },
-	{ STB0899_TSLPL			, 0x12 },
-	{ STB0899_TSCFGH        	, 0x0c },
-	{ STB0899_TSCFGM        	, 0x00 },
-	{ STB0899_TSCFGL        	, 0x00 },
-	{ STB0899_TSOUT			, 0x69 }, /* 0x0d for CAM */
-	{ STB0899_RSSYNCDEL     	, 0x00 },
-	{ STB0899_TSINHDELH     	, 0x02 },
-	{ STB0899_TSINHDELM		, 0x00 },
-	{ STB0899_TSINHDELL		, 0x00 },
-	{ STB0899_TSLLSTKM		, 0x1b },
-	{ STB0899_TSLLSTKL		, 0xb3 },
-	{ STB0899_TSULSTKM		, 0x00 },
-	{ STB0899_TSULSTKL		, 0x00 },
-	{ STB0899_PCKLENUL		, 0xbc },
-	{ STB0899_PCKLENLL		, 0xcc },
-	{ STB0899_RSPCKLEN		, 0xbd },
-	{ STB0899_TSSTATUS		, 0x90 },
-	{ STB0899_ERRCTRL1      	, 0xb6 },
-	{ STB0899_ERRCTRL2      	, 0x95 },
-	{ STB0899_ERRCTRL3      	, 0x8d },
-	{ STB0899_DMONMSK1		, 0x27 },
-	{ STB0899_DMONMSK0		, 0x03 },
-	{ STB0899_DEMAPVIT      	, 0x5c },
-	{ STB0899_PLPARM		, 0x19 },
-	{ STB0899_PDELCTRL      	, 0x48 },
-	{ STB0899_PDELCTRL2     	, 0x00 },
-	{ STB0899_BBHCTRL1      	, 0x00 },
-	{ STB0899_BBHCTRL2      	, 0x00 },
-	{ STB0899_HYSTTHRESH    	, 0x77 },
-	{ STB0899_MATCSTM		, 0x00 },
-	{ STB0899_MATCSTL		, 0x00 },
-	{ STB0899_UPLCSTM		, 0x00 },
-	{ STB0899_UPLCSTL		, 0x00 },
-	{ STB0899_DFLCSTM		, 0x00 },
-	{ STB0899_DFLCSTL		, 0x00 },
-	{ STB0899_SYNCCST		, 0x00 },
-	{ STB0899_SYNCDCSTM		, 0x00 },
-	{ STB0899_SYNCDCSTL		, 0x00 },
-	{ STB0899_ISI_ENTRY		, 0x00 },
-	{ STB0899_ISI_BIT_EN		, 0x00 },
-	{ STB0899_MATSTRM		, 0xf0 },
-	{ STB0899_MATSTRL		, 0x02 },
-	{ STB0899_UPLSTRM		, 0x45 },
-	{ STB0899_UPLSTRL		, 0x60 },
-	{ STB0899_DFLSTRM		, 0xe3 },
-	{ STB0899_DFLSTRL		, 0x00 },
-	{ STB0899_SYNCSTR		, 0x47 },
-	{ STB0899_SYNCDSTRM		, 0x05 },
-	{ STB0899_SYNCDSTRL		, 0x18 },
-	{ STB0899_CFGPDELSTATUS1	, 0x19 },
-	{ STB0899_CFGPDELSTATUS2	, 0x2b },
-	{ STB0899_BBFERRORM		, 0x00 },
-	{ STB0899_BBFERRORL		, 0x01 },
-	{ STB0899_UPKTERRORM		, 0x00 },
-	{ STB0899_UPKTERRORL		, 0x00 },
-	{ 0xffff			, 0xff },
-};
-
-struct stb0899_config vp1041_stb0899_config = {
-	.init_dev		= vp1041_stb0899_s1_init_1,
-	.init_s2_demod		= stb0899_s2_init_2,
-	.init_s1_demod		= vp1041_stb0899_s1_init_3,
-	.init_s2_fec		= stb0899_s2_init_4,
-	.init_tst		= stb0899_s1_init_5,
-
-	.demod_address 		= 0x68, /*  0xd0 >> 1 */
-
-	.xtal_freq		= 27000000,
-	.inversion		= IQ_SWAP_ON, /* 1 */
-
-	.lo_clk			= 76500000,
-	.hi_clk			= 99000000,
-
-	.esno_ave		= STB0899_DVBS2_ESNO_AVE,
-	.esno_quant		= STB0899_DVBS2_ESNO_QUANT,
-	.avframes_coarse	= STB0899_DVBS2_AVFRAMES_COARSE,
-	.avframes_fine		= STB0899_DVBS2_AVFRAMES_FINE,
-	.miss_threshold		= STB0899_DVBS2_MISS_THRESHOLD,
-	.uwp_threshold_acq	= STB0899_DVBS2_UWP_THRESHOLD_ACQ,
-	.uwp_threshold_track	= STB0899_DVBS2_UWP_THRESHOLD_TRACK,
-	.uwp_threshold_sof	= STB0899_DVBS2_UWP_THRESHOLD_SOF,
-	.sof_search_timeout	= STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
-
-	.btr_nco_bits		= STB0899_DVBS2_BTR_NCO_BITS,
-	.btr_gain_shift_offset	= STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
-	.crl_nco_bits		= STB0899_DVBS2_CRL_NCO_BITS,
-	.ldpc_max_iter		= STB0899_DVBS2_LDPC_MAX_ITER,
-
-	.tuner_get_frequency	= stb6100_get_frequency,
-	.tuner_set_frequency	= stb6100_set_frequency,
-	.tuner_set_bandwidth	= stb6100_set_bandwidth,
-	.tuner_get_bandwidth	= stb6100_get_bandwidth,
-	.tuner_set_rfsiggain	= NULL,
-};
-
-struct stb6100_config vp1041_stb6100_config = {
-	.tuner_address	= 0x60,
-	.refclock	= 27000000,
-};
-
-static int vp1041_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
-{
-	struct i2c_adapter *adapter	= &mantis->adapter;
-
-	int err = 0;
-
-	err = mantis_frontend_power(mantis, POWER_ON);
-	if (err == 0) {
-		mantis_frontend_soft_reset(mantis);
-		msleep(250);
-		mantis->fe = dvb_attach(stb0899_attach, &vp1041_stb0899_config, adapter);
-		if (mantis->fe) {
-			dprintk(MANTIS_ERROR, 1,
-				"found STB0899 DVB-S/DVB-S2 frontend @0x%02x",
-				vp1041_stb0899_config.demod_address);
-
-			if (dvb_attach(stb6100_attach, mantis->fe, &vp1041_stb6100_config, adapter)) {
-				if (!dvb_attach(lnbp21_attach, mantis->fe, adapter, 0, 0))
-					dprintk(MANTIS_ERROR, 1, "No LNBP21 found!");
-			}
-		} else {
-			return -EREMOTEIO;
-		}
-	} else {
-		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
-			adapter->name,
-			err);
-
-		return -EIO;
-	}
-
-
-	dprintk(MANTIS_ERROR, 1, "Done!");
-
-	return 0;
-}
-
-struct mantis_hwconfig vp1041_config = {
-	.model_name	= MANTIS_MODEL_NAME,
-	.dev_type	= MANTIS_DEV_TYPE,
-	.ts_size	= MANTIS_TS_188,
-
-	.baud_rate	= MANTIS_BAUD_9600,
-	.parity		= MANTIS_PARITY_NONE,
-	.bytes		= 0,
-
-	.frontend_init	= vp1041_frontend_init,
-	.power		= GPIF_A12,
-	.reset		= GPIF_A13,
-};
diff --git a/drivers/media/dvb/mantis/mantis_vp1041.h b/drivers/media/dvb/mantis/mantis_vp1041.h
deleted file mode 100644
index 1ae5b3d..0000000
--- a/drivers/media/dvb/mantis/mantis_vp1041.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
-	Mantis VP-1041 driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MANTIS_VP1041_H
-#define __MANTIS_VP1041_H
-
-#include "mantis_common.h"
-
-#define MANTIS_VP_1041_DVB_S2	0x0031
-#define SKYSTAR_HD2_10		0x0001
-#define SKYSTAR_HD2_20		0x0003
-#define CINERGY_S2_PCI_HD	0x1179
-
-extern struct mantis_hwconfig vp1041_config;
-
-#endif /* __MANTIS_VP1041_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c
deleted file mode 100644
index 1ca6837..0000000
--- a/drivers/media/dvb/mantis/mantis_vp2033.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
-	Mantis VP-2033 driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "tda1002x.h"
-#include "mantis_common.h"
-#include "mantis_ioc.h"
-#include "mantis_dvb.h"
-#include "mantis_vp2033.h"
-
-#define MANTIS_MODEL_NAME	"VP-2033"
-#define MANTIS_DEV_TYPE		"DVB-C"
-
-struct tda1002x_config vp2033_tda1002x_cu1216_config = {
-	.demod_address = 0x18 >> 1,
-	.invert = 1,
-};
-
-struct tda10023_config vp2033_tda10023_cu1216_config = {
-	.demod_address = 0x18 >> 1,
-	.invert = 1,
-};
-
-static u8 read_pwm(struct mantis_pci *mantis)
-{
-	struct i2c_adapter *adapter = &mantis->adapter;
-
-	u8 b = 0xff;
-	u8 pwm;
-	struct i2c_msg msg[] = {
-		{.addr = 0x50, .flags = 0, .buf = &b, .len = 1},
-		{.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1}
-	};
-
-	if ((i2c_transfer(adapter, msg, 2) != 2)
-	    || (pwm == 0xff))
-		pwm = 0x48;
-
-	return pwm;
-}
-
-static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct mantis_pci *mantis = fe->dvb->priv;
-	struct i2c_adapter *adapter = &mantis->adapter;
-
-	u8 buf[6];
-	struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)};
-	int i;
-
-#define CU1216_IF 36125000
-#define TUNER_MUL 62500
-
-	u32 div = (p->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
-
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = div & 0xff;
-	buf[2] = 0xce;
-	buf[3] = (p->frequency < 150000000 ? 0x01 :
-		  p->frequency < 445000000 ? 0x02 : 0x04);
-	buf[4] = 0xde;
-	buf[5] = 0x20;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	if (i2c_transfer(adapter, &msg, 1) != 1)
-		return -EIO;
-
-	/* wait for the pll lock */
-	msg.flags = I2C_M_RD;
-	msg.len = 1;
-	for (i = 0; i < 20; i++) {
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 1);
-
-		if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40))
-			break;
-
-		msleep(10);
-	}
-
-	/* switch the charge pump to the lower current */
-	msg.flags = 0;
-	msg.len = 2;
-	msg.buf = &buf[2];
-	buf[2] &= ~0x40;
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	if (i2c_transfer(adapter, &msg, 1) != 1)
-		return -EIO;
-
-	return 0;
-}
-
-static int vp2033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
-{
-	struct i2c_adapter *adapter = &mantis->adapter;
-
-	int err = 0;
-
-	err = mantis_frontend_power(mantis, POWER_ON);
-	if (err == 0) {
-		mantis_frontend_soft_reset(mantis);
-		msleep(250);
-
-		dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
-		fe = dvb_attach(tda10021_attach, &vp2033_tda1002x_cu1216_config,
-				     adapter,
-				     read_pwm(mantis));
-
-		if (fe) {
-			dprintk(MANTIS_ERROR, 1,
-				"found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
-				vp2033_tda1002x_cu1216_config.demod_address);
-		} else {
-			fe = dvb_attach(tda10023_attach, &vp2033_tda10023_cu1216_config,
-					     adapter,
-					     read_pwm(mantis));
-
-			if (fe) {
-				dprintk(MANTIS_ERROR, 1,
-					"found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
-					vp2033_tda1002x_cu1216_config.demod_address);
-			}
-		}
-
-		if (fe) {
-			fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
-			dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
-		} else {
-			return -1;
-		}
-	} else {
-		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
-			adapter->name,
-			err);
-
-		return -EIO;
-	}
-
-	mantis->fe = fe;
-	dprintk(MANTIS_DEBUG, 1, "Done!");
-
-	return 0;
-}
-
-struct mantis_hwconfig vp2033_config = {
-	.model_name	= MANTIS_MODEL_NAME,
-	.dev_type	= MANTIS_DEV_TYPE,
-	.ts_size	= MANTIS_TS_204,
-
-	.baud_rate	= MANTIS_BAUD_9600,
-	.parity		= MANTIS_PARITY_NONE,
-	.bytes		= 0,
-
-	.frontend_init	= vp2033_frontend_init,
-	.power		= GPIF_A12,
-	.reset		= GPIF_A13,
-};
diff --git a/drivers/media/dvb/mantis/mantis_vp2033.h b/drivers/media/dvb/mantis/mantis_vp2033.h
deleted file mode 100644
index c55242b..0000000
--- a/drivers/media/dvb/mantis/mantis_vp2033.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
-	Mantis VP-2033 driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MANTIS_VP2033_H
-#define __MANTIS_VP2033_H
-
-#include "mantis_common.h"
-
-#define MANTIS_VP_2033_DVB_C	0x0008
-
-extern struct mantis_hwconfig vp2033_config;
-
-#endif /* __MANTIS_VP2033_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp2040.c b/drivers/media/dvb/mantis/mantis_vp2040.c
deleted file mode 100644
index d480741..0000000
--- a/drivers/media/dvb/mantis/mantis_vp2040.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
-	Mantis VP-2040 driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "tda1002x.h"
-#include "mantis_common.h"
-#include "mantis_ioc.h"
-#include "mantis_dvb.h"
-#include "mantis_vp2040.h"
-
-#define MANTIS_MODEL_NAME	"VP-2040"
-#define MANTIS_DEV_TYPE		"DVB-C"
-
-struct tda1002x_config vp2040_tda1002x_cu1216_config = {
-	.demod_address	= 0x18 >> 1,
-	.invert		= 1,
-};
-
-struct tda10023_config vp2040_tda10023_cu1216_config = {
-	.demod_address	= 0x18 >> 1,
-	.invert		= 1,
-};
-
-static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct mantis_pci *mantis	= fe->dvb->priv;
-	struct i2c_adapter *adapter	= &mantis->adapter;
-
-	u8 buf[6];
-	struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)};
-	int i;
-
-#define CU1216_IF 36125000
-#define TUNER_MUL 62500
-
-	u32 div = (p->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
-
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = div & 0xff;
-	buf[2] = 0xce;
-	buf[3] = (p->frequency < 150000000 ? 0x01 :
-		  p->frequency < 445000000 ? 0x02 : 0x04);
-	buf[4] = 0xde;
-	buf[5] = 0x20;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	if (i2c_transfer(adapter, &msg, 1) != 1)
-		return -EIO;
-
-	/* wait for the pll lock */
-	msg.flags = I2C_M_RD;
-	msg.len = 1;
-	for (i = 0; i < 20; i++) {
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 1);
-
-		if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40))
-			break;
-
-		msleep(10);
-	}
-
-	/* switch the charge pump to the lower current */
-	msg.flags = 0;
-	msg.len = 2;
-	msg.buf = &buf[2];
-	buf[2] &= ~0x40;
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	if (i2c_transfer(adapter, &msg, 1) != 1)
-		return -EIO;
-
-	return 0;
-}
-
-static u8 read_pwm(struct mantis_pci *mantis)
-{
-	struct i2c_adapter *adapter = &mantis->adapter;
-
-	u8 b = 0xff;
-	u8 pwm;
-	struct i2c_msg msg[] = {
-		{.addr = 0x50, .flags = 0, .buf = &b, .len = 1},
-		{.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1}
-	};
-
-	if ((i2c_transfer(adapter, msg, 2) != 2)
-	    || (pwm == 0xff))
-		pwm = 0x48;
-
-	return pwm;
-}
-
-static int vp2040_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
-{
-	struct i2c_adapter *adapter = &mantis->adapter;
-
-	int err = 0;
-
-	err = mantis_frontend_power(mantis, POWER_ON);
-	if (err == 0) {
-		mantis_frontend_soft_reset(mantis);
-		msleep(250);
-
-		dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
-		fe = dvb_attach(tda10021_attach, &vp2040_tda1002x_cu1216_config,
-				     adapter,
-				     read_pwm(mantis));
-
-		if (fe) {
-			dprintk(MANTIS_ERROR, 1,
-				"found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
-				vp2040_tda1002x_cu1216_config.demod_address);
-		} else {
-			fe = dvb_attach(tda10023_attach, &vp2040_tda10023_cu1216_config,
-					     adapter,
-					     read_pwm(mantis));
-
-			if (fe) {
-				dprintk(MANTIS_ERROR, 1,
-					"found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
-					vp2040_tda1002x_cu1216_config.demod_address);
-			}
-		}
-
-		if (fe) {
-			fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
-			dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
-		} else {
-			return -1;
-		}
-	} else {
-		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
-			adapter->name,
-			err);
-
-		return -EIO;
-	}
-	mantis->fe = fe;
-	dprintk(MANTIS_DEBUG, 1, "Done!");
-
-	return 0;
-}
-
-struct mantis_hwconfig vp2040_config = {
-	.model_name	= MANTIS_MODEL_NAME,
-	.dev_type	= MANTIS_DEV_TYPE,
-	.ts_size	= MANTIS_TS_204,
-
-	.baud_rate	= MANTIS_BAUD_9600,
-	.parity		= MANTIS_PARITY_NONE,
-	.bytes		= 0,
-
-	.frontend_init	= vp2040_frontend_init,
-	.power		= GPIF_A12,
-	.reset		= GPIF_A13,
-};
diff --git a/drivers/media/dvb/mantis/mantis_vp2040.h b/drivers/media/dvb/mantis/mantis_vp2040.h
deleted file mode 100644
index d125e21..0000000
--- a/drivers/media/dvb/mantis/mantis_vp2040.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
-	Mantis VP-2040 driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MANTIS_VP2040_H
-#define __MANTIS_VP2040_H
-
-#include "mantis_common.h"
-
-#define MANTIS_VP_2040_DVB_C	0x0043
-#define CINERGY_C		0x1178
-#define CABLESTAR_HD2		0x0002
-
-extern struct mantis_hwconfig vp2040_config;
-
-#endif /* __MANTIS_VP2040_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp3028.c b/drivers/media/dvb/mantis/mantis_vp3028.c
deleted file mode 100644
index 4155c83..0000000
--- a/drivers/media/dvb/mantis/mantis_vp3028.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
-	Mantis VP-3028 driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include "mantis_common.h"
-#include "mantis_vp3028.h"
-
-struct zl10353_config mantis_vp3028_config = {
-	.demod_address	= 0x0f,
-};
-
-#define MANTIS_MODEL_NAME	"VP-3028"
-#define MANTIS_DEV_TYPE		"DVB-T"
-
-struct mantis_hwconfig vp3028_mantis_config = {
-	.model_name	= MANTIS_MODEL_NAME,
-	.dev_type	= MANTIS_DEV_TYPE,
-	.ts_size	= MANTIS_TS_188,
-	.baud_rate	= MANTIS_BAUD_9600,
-	.parity		= MANTIS_PARITY_NONE,
-	.bytes		= 0,
-};
diff --git a/drivers/media/dvb/mantis/mantis_vp3028.h b/drivers/media/dvb/mantis/mantis_vp3028.h
deleted file mode 100644
index b07be6a..0000000
--- a/drivers/media/dvb/mantis/mantis_vp3028.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
-	Mantis VP-3028 driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MANTIS_VP3028_H
-#define __MANTIS_VP3028_H
-
-#include "dvb_frontend.h"
-#include "mantis_common.h"
-#include "zl10353.h"
-
-#define MANTIS_VP_3028_DVB_T	0x0028
-
-extern struct zl10353_config mantis_vp3028_config;
-extern struct mantis_hwconfig vp3028_mantis_config;
-
-#endif /* __MANTIS_VP3028_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp3030.c b/drivers/media/dvb/mantis/mantis_vp3030.c
deleted file mode 100644
index c09308cd..0000000
--- a/drivers/media/dvb/mantis/mantis_vp3030.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
-	Mantis VP-3030 driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "zl10353.h"
-#include "tda665x.h"
-#include "mantis_common.h"
-#include "mantis_ioc.h"
-#include "mantis_dvb.h"
-#include "mantis_vp3030.h"
-
-struct zl10353_config mantis_vp3030_config = {
-	.demod_address		= 0x0f,
-};
-
-struct tda665x_config env57h12d5_config = {
-	.name			= "ENV57H12D5 (ET-50DT)",
-	.addr			= 0x60,
-	.frequency_min		=  47000000,
-	.frequency_max		= 862000000,
-	.frequency_offst	=   3616667,
-	.ref_multiplier		= 6, /* 1/6 MHz */
-	.ref_divider		= 100000, /* 1/6 MHz */
-};
-
-#define MANTIS_MODEL_NAME	"VP-3030"
-#define MANTIS_DEV_TYPE		"DVB-T"
-
-
-static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
-{
-	struct i2c_adapter *adapter	= &mantis->adapter;
-	struct mantis_hwconfig *config	= mantis->hwconfig;
-	int err = 0;
-
-	mantis_gpio_set_bits(mantis, config->reset, 0);
-	msleep(100);
-	err = mantis_frontend_power(mantis, POWER_ON);
-	msleep(100);
-	mantis_gpio_set_bits(mantis, config->reset, 1);
-
-	if (err == 0) {
-		msleep(250);
-		dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
-		fe = dvb_attach(zl10353_attach, &mantis_vp3030_config, adapter);
-
-		if (!fe)
-			return -1;
-
-		dvb_attach(tda665x_attach, fe, &env57h12d5_config, adapter);
-	} else {
-		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
-			adapter->name,
-			err);
-
-		return -EIO;
-
-	}
-	mantis->fe = fe;
-	dprintk(MANTIS_ERROR, 1, "Done!");
-
-	return 0;
-}
-
-struct mantis_hwconfig vp3030_config = {
-	.model_name	= MANTIS_MODEL_NAME,
-	.dev_type	= MANTIS_DEV_TYPE,
-	.ts_size	= MANTIS_TS_188,
-
-	.baud_rate	= MANTIS_BAUD_9600,
-	.parity		= MANTIS_PARITY_NONE,
-	.bytes		= 0,
-
-	.frontend_init	= vp3030_frontend_init,
-	.power		= GPIF_A12,
-	.reset		= GPIF_A13,
-
-	.i2c_mode	= MANTIS_BYTE_MODE
-};
diff --git a/drivers/media/dvb/mantis/mantis_vp3030.h b/drivers/media/dvb/mantis/mantis_vp3030.h
deleted file mode 100644
index 5f12c42..0000000
--- a/drivers/media/dvb/mantis/mantis_vp3030.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
-	Mantis VP-3030 driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MANTIS_VP3030_H
-#define __MANTIS_VP3030_H
-
-#include "mantis_common.h"
-
-#define MANTIS_VP_3030_DVB_T	0x0024
-
-extern struct mantis_hwconfig vp3030_config;
-
-#endif /* __MANTIS_VP3030_H */
diff --git a/drivers/media/dvb/ngene/Kconfig b/drivers/media/dvb/ngene/Kconfig
deleted file mode 100644
index 64c8470..0000000
--- a/drivers/media/dvb/ngene/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-config DVB_NGENE
-	tristate "Micronas nGene support"
-	depends on DVB_CORE && PCI && I2C
-	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
-	select DVB_STV6110x if !DVB_FE_CUSTOMISE
-	select DVB_STV090x if !DVB_FE_CUSTOMISE
-	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
-	select DVB_DRXK if !DVB_FE_CUSTOMISE
-	select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMISE
-	---help---
-	  Support for Micronas PCI express cards with nGene bridge.
-
diff --git a/drivers/media/dvb/ngene/Makefile b/drivers/media/dvb/ngene/Makefile
deleted file mode 100644
index 13ebeff..0000000
--- a/drivers/media/dvb/ngene/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# Makefile for the nGene device driver
-#
-
-ngene-objs := ngene-core.o ngene-i2c.o ngene-cards.o ngene-dvb.o
-
-obj-$(CONFIG_DVB_NGENE) += ngene.o
-
-ccflags-y += -Idrivers/media/dvb/dvb-core/
-ccflags-y += -Idrivers/media/dvb/frontends/
-ccflags-y += -Idrivers/media/common/tuners/
-
-# For the staging CI driver cxd2099
-ccflags-y += -Idrivers/staging/media/cxd2099/
diff --git a/drivers/media/dvb/ngene/ngene-cards.c b/drivers/media/dvb/ngene/ngene-cards.c
deleted file mode 100644
index 0a497be..0000000
--- a/drivers/media/dvb/ngene/ngene-cards.c
+++ /dev/null
@@ -1,560 +0,0 @@
-/*
- * ngene-cards.c: nGene PCIe bridge driver - card specific info
- *
- * Copyright (C) 2005-2007 Micronas
- *
- * Copyright (C) 2008-2009 Ralph Metzler <rjkm@metzlerbros.de>
- *                         Modifications for new nGene firmware,
- *                         support for EEPROM-copying,
- *                         support for new dual DVB-S2 card prototype
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 only, as published by the Free Software Foundation.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-
-#include "ngene.h"
-
-/* demods/tuners */
-#include "stv6110x.h"
-#include "stv090x.h"
-#include "lnbh24.h"
-#include "lgdt330x.h"
-#include "mt2131.h"
-#include "tda18271c2dd.h"
-#include "drxk.h"
-
-
-/****************************************************************************/
-/* Demod/tuner attachment ***************************************************/
-/****************************************************************************/
-
-static int tuner_attach_stv6110(struct ngene_channel *chan)
-{
-	struct i2c_adapter *i2c;
-	struct stv090x_config *feconf = (struct stv090x_config *)
-		chan->dev->card_info->fe_config[chan->number];
-	struct stv6110x_config *tunerconf = (struct stv6110x_config *)
-		chan->dev->card_info->tuner_config[chan->number];
-	struct stv6110x_devctl *ctl;
-
-	/* tuner 1+2: i2c adapter #0, tuner 3+4: i2c adapter #1 */
-	if (chan->number < 2)
-		i2c = &chan->dev->channel[0].i2c_adapter;
-	else
-		i2c = &chan->dev->channel[1].i2c_adapter;
-
-	ctl = dvb_attach(stv6110x_attach, chan->fe, tunerconf, i2c);
-	if (ctl == NULL) {
-		printk(KERN_ERR	DEVICE_NAME ": No STV6110X found!\n");
-		return -ENODEV;
-	}
-
-	feconf->tuner_init          = ctl->tuner_init;
-	feconf->tuner_sleep         = ctl->tuner_sleep;
-	feconf->tuner_set_mode      = ctl->tuner_set_mode;
-	feconf->tuner_set_frequency = ctl->tuner_set_frequency;
-	feconf->tuner_get_frequency = ctl->tuner_get_frequency;
-	feconf->tuner_set_bandwidth = ctl->tuner_set_bandwidth;
-	feconf->tuner_get_bandwidth = ctl->tuner_get_bandwidth;
-	feconf->tuner_set_bbgain    = ctl->tuner_set_bbgain;
-	feconf->tuner_get_bbgain    = ctl->tuner_get_bbgain;
-	feconf->tuner_set_refclk    = ctl->tuner_set_refclk;
-	feconf->tuner_get_status    = ctl->tuner_get_status;
-
-	return 0;
-}
-
-
-static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	struct ngene_channel *chan = fe->sec_priv;
-	int status;
-
-	if (enable) {
-		down(&chan->dev->pll_mutex);
-		status = chan->gate_ctrl(fe, 1);
-	} else {
-		status = chan->gate_ctrl(fe, 0);
-		up(&chan->dev->pll_mutex);
-	}
-	return status;
-}
-
-static int tuner_attach_tda18271(struct ngene_channel *chan)
-{
-	struct i2c_adapter *i2c;
-	struct dvb_frontend *fe;
-
-	i2c = &chan->dev->channel[0].i2c_adapter;
-	if (chan->fe->ops.i2c_gate_ctrl)
-		chan->fe->ops.i2c_gate_ctrl(chan->fe, 1);
-	fe = dvb_attach(tda18271c2dd_attach, chan->fe, i2c, 0x60);
-	if (chan->fe->ops.i2c_gate_ctrl)
-		chan->fe->ops.i2c_gate_ctrl(chan->fe, 0);
-	if (!fe) {
-		printk(KERN_ERR "No TDA18271 found!\n");
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-static int tuner_attach_probe(struct ngene_channel *chan)
-{
-	if (chan->demod_type == 0)
-		return tuner_attach_stv6110(chan);
-	if (chan->demod_type == 1)
-		return tuner_attach_tda18271(chan);
-	return -EINVAL;
-}
-
-static int demod_attach_stv0900(struct ngene_channel *chan)
-{
-	struct i2c_adapter *i2c;
-	struct stv090x_config *feconf = (struct stv090x_config *)
-		chan->dev->card_info->fe_config[chan->number];
-
-	/* tuner 1+2: i2c adapter #0, tuner 3+4: i2c adapter #1 */
-	/* Note: Both adapters share the same i2c bus, but the demod     */
-	/*       driver requires that each demod has its own i2c adapter */
-	if (chan->number < 2)
-		i2c = &chan->dev->channel[0].i2c_adapter;
-	else
-		i2c = &chan->dev->channel[1].i2c_adapter;
-
-	chan->fe = dvb_attach(stv090x_attach, feconf, i2c,
-			(chan->number & 1) == 0 ? STV090x_DEMODULATOR_0
-						: STV090x_DEMODULATOR_1);
-	if (chan->fe == NULL) {
-		printk(KERN_ERR	DEVICE_NAME ": No STV0900 found!\n");
-		return -ENODEV;
-	}
-
-	/* store channel info */
-	if (feconf->tuner_i2c_lock)
-		chan->fe->analog_demod_priv = chan;
-
-	if (!dvb_attach(lnbh24_attach, chan->fe, i2c, 0,
-			0, chan->dev->card_info->lnb[chan->number])) {
-		printk(KERN_ERR DEVICE_NAME ": No LNBH24 found!\n");
-		dvb_frontend_detach(chan->fe);
-		chan->fe = NULL;
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-static void cineS2_tuner_i2c_lock(struct dvb_frontend *fe, int lock)
-{
-	struct ngene_channel *chan = fe->analog_demod_priv;
-
-	if (lock)
-		down(&chan->dev->pll_mutex);
-	else
-		up(&chan->dev->pll_mutex);
-}
-
-static int i2c_read(struct i2c_adapter *adapter, u8 adr, u8 *val)
-{
-	struct i2c_msg msgs[1] = {{.addr = adr,  .flags = I2C_M_RD,
-				   .buf  = val,  .len   = 1 } };
-	return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1;
-}
-
-static int i2c_read_reg16(struct i2c_adapter *adapter, u8 adr,
-			  u16 reg, u8 *val)
-{
-	u8 msg[2] = {reg>>8, reg&0xff};
-	struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
-				   .buf  = msg, .len   = 2},
-				  {.addr = adr, .flags = I2C_M_RD,
-				   .buf  = val, .len   = 1} };
-	return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1;
-}
-
-static int port_has_stv0900(struct i2c_adapter *i2c, int port)
-{
-	u8 val;
-	if (i2c_read_reg16(i2c, 0x68+port/2, 0xf100, &val) < 0)
-		return 0;
-	return 1;
-}
-
-static int port_has_drxk(struct i2c_adapter *i2c, int port)
-{
-	u8 val;
-
-	if (i2c_read(i2c, 0x29+port, &val) < 0)
-		return 0;
-	return 1;
-}
-
-static int demod_attach_drxk(struct ngene_channel *chan,
-			     struct i2c_adapter *i2c)
-{
-	struct drxk_config config;
-
-	memset(&config, 0, sizeof(config));
-	config.microcode_name = "drxk_a3.mc";
-	config.qam_demod_parameter_count = 4;
-	config.adr = 0x29 + (chan->number ^ 2);
-
-	chan->fe = dvb_attach(drxk_attach, &config, i2c);
-	if (!chan->fe) {
-		printk(KERN_ERR "No DRXK found!\n");
-		return -ENODEV;
-	}
-	chan->fe->sec_priv = chan;
-	chan->gate_ctrl = chan->fe->ops.i2c_gate_ctrl;
-	chan->fe->ops.i2c_gate_ctrl = drxk_gate_ctrl;
-	return 0;
-}
-
-static int cineS2_probe(struct ngene_channel *chan)
-{
-	struct i2c_adapter *i2c;
-	struct stv090x_config *fe_conf;
-	u8 buf[3];
-	struct i2c_msg i2c_msg = { .flags = 0, .buf = buf };
-	int rc;
-
-	/* tuner 1+2: i2c adapter #0, tuner 3+4: i2c adapter #1 */
-	if (chan->number < 2)
-		i2c = &chan->dev->channel[0].i2c_adapter;
-	else
-		i2c = &chan->dev->channel[1].i2c_adapter;
-
-	if (port_has_stv0900(i2c, chan->number)) {
-		chan->demod_type = 0;
-		fe_conf = chan->dev->card_info->fe_config[chan->number];
-		/* demod found, attach it */
-		rc = demod_attach_stv0900(chan);
-		if (rc < 0 || chan->number < 2)
-			return rc;
-
-		/* demod #2: reprogram outputs DPN1 & DPN2 */
-		i2c_msg.addr = fe_conf->address;
-		i2c_msg.len = 3;
-		buf[0] = 0xf1;
-		switch (chan->number) {
-		case 2:
-			buf[1] = 0x5c;
-			buf[2] = 0xc2;
-			break;
-		case 3:
-			buf[1] = 0x61;
-			buf[2] = 0xcc;
-			break;
-		default:
-			return -ENODEV;
-		}
-		rc = i2c_transfer(i2c, &i2c_msg, 1);
-		if (rc != 1) {
-			printk(KERN_ERR DEVICE_NAME ": could not setup DPNx\n");
-			return -EIO;
-		}
-	} else if (port_has_drxk(i2c, chan->number^2)) {
-		chan->demod_type = 1;
-		demod_attach_drxk(chan, i2c);
-	} else {
-		printk(KERN_ERR "No demod found on chan %d\n", chan->number);
-		return -ENODEV;
-	}
-	return 0;
-}
-
-
-static struct lgdt330x_config aver_m780 = {
-	.demod_address = 0xb2 >> 1,
-	.demod_chip    = LGDT3303,
-	.serial_mpeg   = 0x00, /* PARALLEL */
-	.clock_polarity_flip = 1,
-};
-
-static struct mt2131_config m780_tunerconfig = {
-	0xc0 >> 1
-};
-
-/* A single func to attach the demo and tuner, rather than
- * use two sep funcs like the current design mandates.
- */
-static int demod_attach_lg330x(struct ngene_channel *chan)
-{
-	chan->fe = dvb_attach(lgdt330x_attach, &aver_m780, &chan->i2c_adapter);
-	if (chan->fe == NULL) {
-		printk(KERN_ERR	DEVICE_NAME ": No LGDT330x found!\n");
-		return -ENODEV;
-	}
-
-	dvb_attach(mt2131_attach, chan->fe, &chan->i2c_adapter,
-		   &m780_tunerconfig, 0);
-
-	return (chan->fe) ? 0 : -ENODEV;
-}
-
-/****************************************************************************/
-/* Switch control (I2C gates, etc.) *****************************************/
-/****************************************************************************/
-
-
-static struct stv090x_config fe_cineS2 = {
-	.device         = STV0900,
-	.demod_mode     = STV090x_DUAL,
-	.clk_mode       = STV090x_CLK_EXT,
-
-	.xtal           = 27000000,
-	.address        = 0x68,
-
-	.ts1_mode       = STV090x_TSMODE_SERIAL_PUNCTURED,
-	.ts2_mode       = STV090x_TSMODE_SERIAL_PUNCTURED,
-
-	.repeater_level = STV090x_RPTLEVEL_16,
-
-	.adc1_range	= STV090x_ADC_1Vpp,
-	.adc2_range	= STV090x_ADC_1Vpp,
-
-	.diseqc_envelope_mode = true,
-
-	.tuner_i2c_lock = cineS2_tuner_i2c_lock,
-};
-
-static struct stv090x_config fe_cineS2_2 = {
-	.device         = STV0900,
-	.demod_mode     = STV090x_DUAL,
-	.clk_mode       = STV090x_CLK_EXT,
-
-	.xtal           = 27000000,
-	.address        = 0x69,
-
-	.ts1_mode       = STV090x_TSMODE_SERIAL_PUNCTURED,
-	.ts2_mode       = STV090x_TSMODE_SERIAL_PUNCTURED,
-
-	.repeater_level = STV090x_RPTLEVEL_16,
-
-	.adc1_range	= STV090x_ADC_1Vpp,
-	.adc2_range	= STV090x_ADC_1Vpp,
-
-	.diseqc_envelope_mode = true,
-
-	.tuner_i2c_lock = cineS2_tuner_i2c_lock,
-};
-
-static struct stv6110x_config tuner_cineS2_0 = {
-	.addr	= 0x60,
-	.refclk	= 27000000,
-	.clk_div = 1,
-};
-
-static struct stv6110x_config tuner_cineS2_1 = {
-	.addr	= 0x63,
-	.refclk	= 27000000,
-	.clk_div = 1,
-};
-
-static struct ngene_info ngene_info_cineS2 = {
-	.type		= NGENE_SIDEWINDER,
-	.name		= "Linux4Media cineS2 DVB-S2 Twin Tuner",
-	.io_type	= {NGENE_IO_TSIN, NGENE_IO_TSIN},
-	.demod_attach	= {demod_attach_stv0900, demod_attach_stv0900},
-	.tuner_attach	= {tuner_attach_stv6110, tuner_attach_stv6110},
-	.fe_config	= {&fe_cineS2, &fe_cineS2},
-	.tuner_config	= {&tuner_cineS2_0, &tuner_cineS2_1},
-	.lnb		= {0x0b, 0x08},
-	.tsf		= {3, 3},
-	.fw_version	= 18,
-	.msi_supported	= true,
-};
-
-static struct ngene_info ngene_info_satixS2 = {
-	.type		= NGENE_SIDEWINDER,
-	.name		= "Mystique SaTiX-S2 Dual",
-	.io_type	= {NGENE_IO_TSIN, NGENE_IO_TSIN},
-	.demod_attach	= {demod_attach_stv0900, demod_attach_stv0900},
-	.tuner_attach	= {tuner_attach_stv6110, tuner_attach_stv6110},
-	.fe_config	= {&fe_cineS2, &fe_cineS2},
-	.tuner_config	= {&tuner_cineS2_0, &tuner_cineS2_1},
-	.lnb		= {0x0b, 0x08},
-	.tsf		= {3, 3},
-	.fw_version	= 18,
-	.msi_supported	= true,
-};
-
-static struct ngene_info ngene_info_satixS2v2 = {
-	.type		= NGENE_SIDEWINDER,
-	.name		= "Mystique SaTiX-S2 Dual (v2)",
-	.io_type	= {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN,
-			   NGENE_IO_TSOUT},
-	.demod_attach	= {demod_attach_stv0900, demod_attach_stv0900, cineS2_probe, cineS2_probe},
-	.tuner_attach	= {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_probe, tuner_attach_probe},
-	.fe_config	= {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2},
-	.tuner_config	= {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1},
-	.lnb		= {0x0a, 0x08, 0x0b, 0x09},
-	.tsf		= {3, 3},
-	.fw_version	= 18,
-	.msi_supported	= true,
-};
-
-static struct ngene_info ngene_info_cineS2v5 = {
-	.type		= NGENE_SIDEWINDER,
-	.name		= "Linux4Media cineS2 DVB-S2 Twin Tuner (v5)",
-	.io_type	= {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN,
-			   NGENE_IO_TSOUT},
-	.demod_attach	= {demod_attach_stv0900, demod_attach_stv0900, cineS2_probe, cineS2_probe},
-	.tuner_attach	= {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_probe, tuner_attach_probe},
-	.fe_config	= {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2},
-	.tuner_config	= {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1},
-	.lnb		= {0x0a, 0x08, 0x0b, 0x09},
-	.tsf		= {3, 3},
-	.fw_version	= 18,
-	.msi_supported	= true,
-};
-
-
-static struct ngene_info ngene_info_duoFlex = {
-	.type           = NGENE_SIDEWINDER,
-	.name           = "Digital Devices DuoFlex PCIe or miniPCIe",
-	.io_type        = {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN,
-			   NGENE_IO_TSOUT},
-	.demod_attach   = {cineS2_probe, cineS2_probe, cineS2_probe, cineS2_probe},
-	.tuner_attach   = {tuner_attach_probe, tuner_attach_probe, tuner_attach_probe, tuner_attach_probe},
-	.fe_config      = {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2},
-	.tuner_config   = {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1},
-	.lnb            = {0x0a, 0x08, 0x0b, 0x09},
-	.tsf            = {3, 3},
-	.fw_version     = 18,
-	.msi_supported	= true,
-};
-
-static struct ngene_info ngene_info_m780 = {
-	.type           = NGENE_APP,
-	.name           = "Aver M780 ATSC/QAM-B",
-
-	/* Channel 0 is analog, which is currently unsupported */
-	.io_type        = { NGENE_IO_NONE, NGENE_IO_TSIN },
-	.demod_attach   = { NULL, demod_attach_lg330x },
-
-	/* Ensure these are NULL else the frame will call them (as funcs) */
-	.tuner_attach   = { 0, 0, 0, 0 },
-	.fe_config      = { NULL, &aver_m780 },
-	.avf            = { 0 },
-
-	/* A custom electrical interface config for the demod to bridge */
-	.tsf		= { 4, 4 },
-	.fw_version	= 15,
-};
-
-/****************************************************************************/
-
-
-
-/****************************************************************************/
-/* PCI Subsystem ID *********************************************************/
-/****************************************************************************/
-
-#define NGENE_ID(_subvend, _subdev, _driverdata) { \
-	.vendor = NGENE_VID, .device = NGENE_PID, \
-	.subvendor = _subvend, .subdevice = _subdev, \
-	.driver_data = (unsigned long) &_driverdata }
-
-/****************************************************************************/
-
-static const struct pci_device_id ngene_id_tbl[] __devinitdata = {
-	NGENE_ID(0x18c3, 0xabc3, ngene_info_cineS2),
-	NGENE_ID(0x18c3, 0xabc4, ngene_info_cineS2),
-	NGENE_ID(0x18c3, 0xdb01, ngene_info_satixS2),
-	NGENE_ID(0x18c3, 0xdb02, ngene_info_satixS2v2),
-	NGENE_ID(0x18c3, 0xdd00, ngene_info_cineS2v5),
-	NGENE_ID(0x18c3, 0xdd10, ngene_info_duoFlex),
-	NGENE_ID(0x18c3, 0xdd20, ngene_info_duoFlex),
-	NGENE_ID(0x1461, 0x062e, ngene_info_m780),
-	{0}
-};
-MODULE_DEVICE_TABLE(pci, ngene_id_tbl);
-
-/****************************************************************************/
-/* Init/Exit ****************************************************************/
-/****************************************************************************/
-
-static pci_ers_result_t ngene_error_detected(struct pci_dev *dev,
-					     enum pci_channel_state state)
-{
-	printk(KERN_ERR DEVICE_NAME ": PCI error\n");
-	if (state == pci_channel_io_perm_failure)
-		return PCI_ERS_RESULT_DISCONNECT;
-	if (state == pci_channel_io_frozen)
-		return PCI_ERS_RESULT_NEED_RESET;
-	return PCI_ERS_RESULT_CAN_RECOVER;
-}
-
-static pci_ers_result_t ngene_link_reset(struct pci_dev *dev)
-{
-	printk(KERN_INFO DEVICE_NAME ": link reset\n");
-	return 0;
-}
-
-static pci_ers_result_t ngene_slot_reset(struct pci_dev *dev)
-{
-	printk(KERN_INFO DEVICE_NAME ": slot reset\n");
-	return 0;
-}
-
-static void ngene_resume(struct pci_dev *dev)
-{
-	printk(KERN_INFO DEVICE_NAME ": resume\n");
-}
-
-static const struct pci_error_handlers ngene_errors = {
-	.error_detected = ngene_error_detected,
-	.link_reset = ngene_link_reset,
-	.slot_reset = ngene_slot_reset,
-	.resume = ngene_resume,
-};
-
-static struct pci_driver ngene_pci_driver = {
-	.name        = "ngene",
-	.id_table    = ngene_id_tbl,
-	.probe       = ngene_probe,
-	.remove      = __devexit_p(ngene_remove),
-	.err_handler = &ngene_errors,
-	.shutdown    = ngene_shutdown,
-};
-
-static __init int module_init_ngene(void)
-{
-	printk(KERN_INFO
-	       "nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas\n");
-	return pci_register_driver(&ngene_pci_driver);
-}
-
-static __exit void module_exit_ngene(void)
-{
-	pci_unregister_driver(&ngene_pci_driver);
-}
-
-module_init(module_init_ngene);
-module_exit(module_exit_ngene);
-
-MODULE_DESCRIPTION("nGene");
-MODULE_AUTHOR("Micronas, Ralph Metzler, Manfred Voelkel");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/ngene/ngene-core.c b/drivers/media/dvb/ngene/ngene-core.c
deleted file mode 100644
index 3985738..0000000
--- a/drivers/media/dvb/ngene/ngene-core.c
+++ /dev/null
@@ -1,1713 +0,0 @@
-/*
- * ngene.c: nGene PCIe bridge driver
- *
- * Copyright (C) 2005-2007 Micronas
- *
- * Copyright (C) 2008-2009 Ralph Metzler <rjkm@metzlerbros.de>
- *                         Modifications for new nGene firmware,
- *                         support for EEPROM-copying,
- *                         support for new dual DVB-S2 card prototype
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 only, as published by the Free Software Foundation.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/poll.h>
-#include <linux/io.h>
-#include <asm/div64.h>
-#include <linux/pci.h>
-#include <linux/timer.h>
-#include <linux/byteorder/generic.h>
-#include <linux/firmware.h>
-#include <linux/vmalloc.h>
-
-#include "ngene.h"
-
-static int one_adapter;
-module_param(one_adapter, int, 0444);
-MODULE_PARM_DESC(one_adapter, "Use only one adapter.");
-
-static int shutdown_workaround;
-module_param(shutdown_workaround, int, 0644);
-MODULE_PARM_DESC(shutdown_workaround, "Activate workaround for shutdown problem with some chipsets.");
-
-static int debug;
-module_param(debug, int, 0444);
-MODULE_PARM_DESC(debug, "Print debugging information.");
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-#define dprintk	if (debug) printk
-
-#define ngwriteb(dat, adr)         writeb((dat), (char *)(dev->iomem + (adr)))
-#define ngwritel(dat, adr)         writel((dat), (char *)(dev->iomem + (adr)))
-#define ngwriteb(dat, adr)         writeb((dat), (char *)(dev->iomem + (adr)))
-#define ngreadl(adr)               readl(dev->iomem + (adr))
-#define ngreadb(adr)               readb(dev->iomem + (adr))
-#define ngcpyto(adr, src, count)   memcpy_toio((char *) \
-				   (dev->iomem + (adr)), (src), (count))
-#define ngcpyfrom(dst, adr, count) memcpy_fromio((dst), (char *) \
-				   (dev->iomem + (adr)), (count))
-
-/****************************************************************************/
-/* nGene interrupt handler **************************************************/
-/****************************************************************************/
-
-static void event_tasklet(unsigned long data)
-{
-	struct ngene *dev = (struct ngene *)data;
-
-	while (dev->EventQueueReadIndex != dev->EventQueueWriteIndex) {
-		struct EVENT_BUFFER Event =
-			dev->EventQueue[dev->EventQueueReadIndex];
-		dev->EventQueueReadIndex =
-			(dev->EventQueueReadIndex + 1) & (EVENT_QUEUE_SIZE - 1);
-
-		if ((Event.UARTStatus & 0x01) && (dev->TxEventNotify))
-			dev->TxEventNotify(dev, Event.TimeStamp);
-		if ((Event.UARTStatus & 0x02) && (dev->RxEventNotify))
-			dev->RxEventNotify(dev, Event.TimeStamp,
-					   Event.RXCharacter);
-	}
-}
-
-static void demux_tasklet(unsigned long data)
-{
-	struct ngene_channel *chan = (struct ngene_channel *)data;
-	struct SBufferHeader *Cur = chan->nextBuffer;
-
-	spin_lock_irq(&chan->state_lock);
-
-	while (Cur->ngeneBuffer.SR.Flags & 0x80) {
-		if (chan->mode & NGENE_IO_TSOUT) {
-			u32 Flags = chan->DataFormatFlags;
-			if (Cur->ngeneBuffer.SR.Flags & 0x20)
-				Flags |= BEF_OVERFLOW;
-			if (chan->pBufferExchange) {
-				if (!chan->pBufferExchange(chan,
-							   Cur->Buffer1,
-							   chan->Capture1Length,
-							   Cur->ngeneBuffer.SR.
-							   Clock, Flags)) {
-					/*
-					   We didn't get data
-					   Clear in service flag to make sure we
-					   get called on next interrupt again.
-					   leave fill/empty (0x80) flag alone
-					   to avoid hardware running out of
-					   buffers during startup, we hold only
-					   in run state ( the source may be late
-					   delivering data )
-					*/
-
-					if (chan->HWState == HWSTATE_RUN) {
-						Cur->ngeneBuffer.SR.Flags &=
-							~0x40;
-						break;
-						/* Stop processing stream */
-					}
-				} else {
-					/* We got a valid buffer,
-					   so switch to run state */
-					chan->HWState = HWSTATE_RUN;
-				}
-			} else {
-				printk(KERN_ERR DEVICE_NAME ": OOPS\n");
-				if (chan->HWState == HWSTATE_RUN) {
-					Cur->ngeneBuffer.SR.Flags &= ~0x40;
-					break;	/* Stop processing stream */
-				}
-			}
-			if (chan->AudioDTOUpdated) {
-				printk(KERN_INFO DEVICE_NAME
-				       ": Update AudioDTO = %d\n",
-				       chan->AudioDTOValue);
-				Cur->ngeneBuffer.SR.DTOUpdate =
-					chan->AudioDTOValue;
-				chan->AudioDTOUpdated = 0;
-			}
-		} else {
-			if (chan->HWState == HWSTATE_RUN) {
-				u32 Flags = chan->DataFormatFlags;
-				IBufferExchange *exch1 = chan->pBufferExchange;
-				IBufferExchange *exch2 = chan->pBufferExchange2;
-				if (Cur->ngeneBuffer.SR.Flags & 0x01)
-					Flags |= BEF_EVEN_FIELD;
-				if (Cur->ngeneBuffer.SR.Flags & 0x20)
-					Flags |= BEF_OVERFLOW;
-				spin_unlock_irq(&chan->state_lock);
-				if (exch1)
-					exch1(chan, Cur->Buffer1,
-						chan->Capture1Length,
-						Cur->ngeneBuffer.SR.Clock,
-						Flags);
-				if (exch2)
-					exch2(chan, Cur->Buffer2,
-						chan->Capture2Length,
-						Cur->ngeneBuffer.SR.Clock,
-						Flags);
-				spin_lock_irq(&chan->state_lock);
-			} else if (chan->HWState != HWSTATE_STOP)
-				chan->HWState = HWSTATE_RUN;
-		}
-		Cur->ngeneBuffer.SR.Flags = 0x00;
-		Cur = Cur->Next;
-	}
-	chan->nextBuffer = Cur;
-
-	spin_unlock_irq(&chan->state_lock);
-}
-
-static irqreturn_t irq_handler(int irq, void *dev_id)
-{
-	struct ngene *dev = (struct ngene *)dev_id;
-	u32 icounts = 0;
-	irqreturn_t rc = IRQ_NONE;
-	u32 i = MAX_STREAM;
-	u8 *tmpCmdDoneByte;
-
-	if (dev->BootFirmware) {
-		icounts = ngreadl(NGENE_INT_COUNTS);
-		if (icounts != dev->icounts) {
-			ngwritel(0, FORCE_NMI);
-			dev->cmd_done = 1;
-			wake_up(&dev->cmd_wq);
-			dev->icounts = icounts;
-			rc = IRQ_HANDLED;
-		}
-		return rc;
-	}
-
-	ngwritel(0, FORCE_NMI);
-
-	spin_lock(&dev->cmd_lock);
-	tmpCmdDoneByte = dev->CmdDoneByte;
-	if (tmpCmdDoneByte &&
-	    (*tmpCmdDoneByte ||
-	    (dev->ngenetohost[0] == 1 && dev->ngenetohost[1] != 0))) {
-		dev->CmdDoneByte = NULL;
-		dev->cmd_done = 1;
-		wake_up(&dev->cmd_wq);
-		rc = IRQ_HANDLED;
-	}
-	spin_unlock(&dev->cmd_lock);
-
-	if (dev->EventBuffer->EventStatus & 0x80) {
-		u8 nextWriteIndex =
-			(dev->EventQueueWriteIndex + 1) &
-			(EVENT_QUEUE_SIZE - 1);
-		if (nextWriteIndex != dev->EventQueueReadIndex) {
-			dev->EventQueue[dev->EventQueueWriteIndex] =
-				*(dev->EventBuffer);
-			dev->EventQueueWriteIndex = nextWriteIndex;
-		} else {
-			printk(KERN_ERR DEVICE_NAME ": event overflow\n");
-			dev->EventQueueOverflowCount += 1;
-			dev->EventQueueOverflowFlag = 1;
-		}
-		dev->EventBuffer->EventStatus &= ~0x80;
-		tasklet_schedule(&dev->event_tasklet);
-		rc = IRQ_HANDLED;
-	}
-
-	while (i > 0) {
-		i--;
-		spin_lock(&dev->channel[i].state_lock);
-		/* if (dev->channel[i].State>=KSSTATE_RUN) { */
-		if (dev->channel[i].nextBuffer) {
-			if ((dev->channel[i].nextBuffer->
-			     ngeneBuffer.SR.Flags & 0xC0) == 0x80) {
-				dev->channel[i].nextBuffer->
-					ngeneBuffer.SR.Flags |= 0x40;
-				tasklet_schedule(
-					&dev->channel[i].demux_tasklet);
-				rc = IRQ_HANDLED;
-			}
-		}
-		spin_unlock(&dev->channel[i].state_lock);
-	}
-
-	/* Request might have been processed by a previous call. */
-	return IRQ_HANDLED;
-}
-
-/****************************************************************************/
-/* nGene command interface **************************************************/
-/****************************************************************************/
-
-static void dump_command_io(struct ngene *dev)
-{
-	u8 buf[8], *b;
-
-	ngcpyfrom(buf, HOST_TO_NGENE, 8);
-	printk(KERN_ERR "host_to_ngene (%04x): %02x %02x %02x %02x %02x %02x %02x %02x\n",
-		HOST_TO_NGENE, buf[0], buf[1], buf[2], buf[3],
-		buf[4], buf[5], buf[6], buf[7]);
-
-	ngcpyfrom(buf, NGENE_TO_HOST, 8);
-	printk(KERN_ERR "ngene_to_host (%04x): %02x %02x %02x %02x %02x %02x %02x %02x\n",
-		NGENE_TO_HOST, buf[0], buf[1], buf[2], buf[3],
-		buf[4], buf[5], buf[6], buf[7]);
-
-	b = dev->hosttongene;
-	printk(KERN_ERR "dev->hosttongene (%p): %02x %02x %02x %02x %02x %02x %02x %02x\n",
-		b, b[0], b[1], b[2], b[3], b[4], b[5], b[6], b[7]);
-
-	b = dev->ngenetohost;
-	printk(KERN_ERR "dev->ngenetohost (%p): %02x %02x %02x %02x %02x %02x %02x %02x\n",
-		b, b[0], b[1], b[2], b[3], b[4], b[5], b[6], b[7]);
-}
-
-static int ngene_command_mutex(struct ngene *dev, struct ngene_command *com)
-{
-	int ret;
-	u8 *tmpCmdDoneByte;
-
-	dev->cmd_done = 0;
-
-	if (com->cmd.hdr.Opcode == CMD_FWLOAD_PREPARE) {
-		dev->BootFirmware = 1;
-		dev->icounts = ngreadl(NGENE_INT_COUNTS);
-		ngwritel(0, NGENE_COMMAND);
-		ngwritel(0, NGENE_COMMAND_HI);
-		ngwritel(0, NGENE_STATUS);
-		ngwritel(0, NGENE_STATUS_HI);
-		ngwritel(0, NGENE_EVENT);
-		ngwritel(0, NGENE_EVENT_HI);
-	} else if (com->cmd.hdr.Opcode == CMD_FWLOAD_FINISH) {
-		u64 fwio = dev->PAFWInterfaceBuffer;
-
-		ngwritel(fwio & 0xffffffff, NGENE_COMMAND);
-		ngwritel(fwio >> 32, NGENE_COMMAND_HI);
-		ngwritel((fwio + 256) & 0xffffffff, NGENE_STATUS);
-		ngwritel((fwio + 256) >> 32, NGENE_STATUS_HI);
-		ngwritel((fwio + 512) & 0xffffffff, NGENE_EVENT);
-		ngwritel((fwio + 512) >> 32, NGENE_EVENT_HI);
-	}
-
-	memcpy(dev->FWInterfaceBuffer, com->cmd.raw8, com->in_len + 2);
-
-	if (dev->BootFirmware)
-		ngcpyto(HOST_TO_NGENE, com->cmd.raw8, com->in_len + 2);
-
-	spin_lock_irq(&dev->cmd_lock);
-	tmpCmdDoneByte = dev->ngenetohost + com->out_len;
-	if (!com->out_len)
-		tmpCmdDoneByte++;
-	*tmpCmdDoneByte = 0;
-	dev->ngenetohost[0] = 0;
-	dev->ngenetohost[1] = 0;
-	dev->CmdDoneByte = tmpCmdDoneByte;
-	spin_unlock_irq(&dev->cmd_lock);
-
-	/* Notify 8051. */
-	ngwritel(1, FORCE_INT);
-
-	ret = wait_event_timeout(dev->cmd_wq, dev->cmd_done == 1, 2 * HZ);
-	if (!ret) {
-		/*ngwritel(0, FORCE_NMI);*/
-
-		printk(KERN_ERR DEVICE_NAME
-		       ": Command timeout cmd=%02x prev=%02x\n",
-		       com->cmd.hdr.Opcode, dev->prev_cmd);
-		dump_command_io(dev);
-		return -1;
-	}
-	if (com->cmd.hdr.Opcode == CMD_FWLOAD_FINISH)
-		dev->BootFirmware = 0;
-
-	dev->prev_cmd = com->cmd.hdr.Opcode;
-
-	if (!com->out_len)
-		return 0;
-
-	memcpy(com->cmd.raw8, dev->ngenetohost, com->out_len);
-
-	return 0;
-}
-
-int ngene_command(struct ngene *dev, struct ngene_command *com)
-{
-	int result;
-
-	down(&dev->cmd_mutex);
-	result = ngene_command_mutex(dev, com);
-	up(&dev->cmd_mutex);
-	return result;
-}
-
-
-static int ngene_command_load_firmware(struct ngene *dev,
-				       u8 *ngene_fw, u32 size)
-{
-#define FIRSTCHUNK (1024)
-	u32 cleft;
-	struct ngene_command com;
-
-	com.cmd.hdr.Opcode = CMD_FWLOAD_PREPARE;
-	com.cmd.hdr.Length = 0;
-	com.in_len = 0;
-	com.out_len = 0;
-
-	ngene_command(dev, &com);
-
-	cleft = (size + 3) & ~3;
-	if (cleft > FIRSTCHUNK) {
-		ngcpyto(PROGRAM_SRAM + FIRSTCHUNK, ngene_fw + FIRSTCHUNK,
-			cleft - FIRSTCHUNK);
-		cleft = FIRSTCHUNK;
-	}
-	ngcpyto(DATA_FIFO_AREA, ngene_fw, cleft);
-
-	memset(&com, 0, sizeof(struct ngene_command));
-	com.cmd.hdr.Opcode = CMD_FWLOAD_FINISH;
-	com.cmd.hdr.Length = 4;
-	com.cmd.FWLoadFinish.Address = DATA_FIFO_AREA;
-	com.cmd.FWLoadFinish.Length = (unsigned short)cleft;
-	com.in_len = 4;
-	com.out_len = 0;
-
-	return ngene_command(dev, &com);
-}
-
-
-static int ngene_command_config_buf(struct ngene *dev, u8 config)
-{
-	struct ngene_command com;
-
-	com.cmd.hdr.Opcode = CMD_CONFIGURE_BUFFER;
-	com.cmd.hdr.Length = 1;
-	com.cmd.ConfigureBuffers.config = config;
-	com.in_len = 1;
-	com.out_len = 0;
-
-	if (ngene_command(dev, &com) < 0)
-		return -EIO;
-	return 0;
-}
-
-static int ngene_command_config_free_buf(struct ngene *dev, u8 *config)
-{
-	struct ngene_command com;
-
-	com.cmd.hdr.Opcode = CMD_CONFIGURE_FREE_BUFFER;
-	com.cmd.hdr.Length = 6;
-	memcpy(&com.cmd.ConfigureBuffers.config, config, 6);
-	com.in_len = 6;
-	com.out_len = 0;
-
-	if (ngene_command(dev, &com) < 0)
-		return -EIO;
-
-	return 0;
-}
-
-int ngene_command_gpio_set(struct ngene *dev, u8 select, u8 level)
-{
-	struct ngene_command com;
-
-	com.cmd.hdr.Opcode = CMD_SET_GPIO_PIN;
-	com.cmd.hdr.Length = 1;
-	com.cmd.SetGpioPin.select = select | (level << 7);
-	com.in_len = 1;
-	com.out_len = 0;
-
-	return ngene_command(dev, &com);
-}
-
-
-/*
- 02000640 is sample on rising edge.
- 02000740 is sample on falling edge.
- 02000040 is ignore "valid" signal
-
- 0: FD_CTL1 Bit 7,6 must be 0,1
-    7   disable(fw controlled)
-    6   0-AUX,1-TS
-    5   0-par,1-ser
-    4   0-lsb/1-msb
-    3,2 reserved
-    1,0 0-no sync, 1-use ext. start, 2-use 0x47, 3-both
- 1: FD_CTL2 has 3-valid must be hi, 2-use valid, 1-edge
- 2: FD_STA is read-only. 0-sync
- 3: FD_INSYNC is number of 47s to trigger "in sync".
- 4: FD_OUTSYNC is number of 47s to trigger "out of sync".
- 5: FD_MAXBYTE1 is low-order of bytes per packet.
- 6: FD_MAXBYTE2 is high-order of bytes per packet.
- 7: Top byte is unused.
-*/
-
-/****************************************************************************/
-
-static u8 TSFeatureDecoderSetup[8 * 5] = {
-	0x42, 0x00, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00,
-	0x40, 0x06, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00,	/* DRXH */
-	0x71, 0x07, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00,	/* DRXHser */
-	0x72, 0x00, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00,	/* S2ser */
-	0x40, 0x07, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, /* LGDT3303 */
-};
-
-/* Set NGENE I2S Config to 16 bit packed */
-static u8 I2SConfiguration[] = {
-	0x00, 0x10, 0x00, 0x00,
-	0x80, 0x10, 0x00, 0x00,
-};
-
-static u8 SPDIFConfiguration[10] = {
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-/* Set NGENE I2S Config to transport stream compatible mode */
-
-static u8 TS_I2SConfiguration[4] = { 0x3E, 0x18, 0x00, 0x00 };
-
-static u8 TS_I2SOutConfiguration[4] = { 0x80, 0x04, 0x00, 0x00 };
-
-static u8 ITUDecoderSetup[4][16] = {
-	{0x1c, 0x13, 0x01, 0x68, 0x3d, 0x90, 0x14, 0x20,  /* SDTV */
-	 0x00, 0x00, 0x01, 0xb0, 0x9c, 0x00, 0x00, 0x00},
-	{0x9c, 0x03, 0x23, 0xC0, 0x60, 0x0E, 0x13, 0x00,
-	 0x00, 0x00, 0x00, 0x01, 0xB0, 0x00, 0x00, 0x00},
-	{0x9f, 0x00, 0x23, 0xC0, 0x60, 0x0F, 0x13, 0x00,  /* HDTV 1080i50 */
-	 0x00, 0x00, 0x00, 0x01, 0xB0, 0x00, 0x00, 0x00},
-	{0x9c, 0x01, 0x23, 0xC0, 0x60, 0x0E, 0x13, 0x00,  /* HDTV 1080i60 */
-	 0x00, 0x00, 0x00, 0x01, 0xB0, 0x00, 0x00, 0x00},
-};
-
-/*
- * 50 48 60 gleich
- * 27p50 9f 00 22 80 42 69 18 ...
- * 27p60 93 00 22 80 82 69 1c ...
- */
-
-/* Maxbyte to 1144 (for raw data) */
-static u8 ITUFeatureDecoderSetup[8] = {
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x04, 0x00
-};
-
-void FillTSBuffer(void *Buffer, int Length, u32 Flags)
-{
-	u32 *ptr = Buffer;
-
-	memset(Buffer, TS_FILLER, Length);
-	while (Length > 0) {
-		if (Flags & DF_SWAP32)
-			*ptr = 0x471FFF10;
-		else
-			*ptr = 0x10FF1F47;
-		ptr += (188 / 4);
-		Length -= 188;
-	}
-}
-
-
-static void flush_buffers(struct ngene_channel *chan)
-{
-	u8 val;
-
-	do {
-		msleep(1);
-		spin_lock_irq(&chan->state_lock);
-		val = chan->nextBuffer->ngeneBuffer.SR.Flags & 0x80;
-		spin_unlock_irq(&chan->state_lock);
-	} while (val);
-}
-
-static void clear_buffers(struct ngene_channel *chan)
-{
-	struct SBufferHeader *Cur = chan->nextBuffer;
-
-	do {
-		memset(&Cur->ngeneBuffer.SR, 0, sizeof(Cur->ngeneBuffer.SR));
-		if (chan->mode & NGENE_IO_TSOUT)
-			FillTSBuffer(Cur->Buffer1,
-				     chan->Capture1Length,
-				     chan->DataFormatFlags);
-		Cur = Cur->Next;
-	} while (Cur != chan->nextBuffer);
-
-	if (chan->mode & NGENE_IO_TSOUT) {
-		chan->nextBuffer->ngeneBuffer.SR.DTOUpdate =
-			chan->AudioDTOValue;
-		chan->AudioDTOUpdated = 0;
-
-		Cur = chan->TSIdleBuffer.Head;
-
-		do {
-			memset(&Cur->ngeneBuffer.SR, 0,
-			       sizeof(Cur->ngeneBuffer.SR));
-			FillTSBuffer(Cur->Buffer1,
-				     chan->Capture1Length,
-				     chan->DataFormatFlags);
-			Cur = Cur->Next;
-		} while (Cur != chan->TSIdleBuffer.Head);
-	}
-}
-
-static int ngene_command_stream_control(struct ngene *dev, u8 stream,
-					u8 control, u8 mode, u8 flags)
-{
-	struct ngene_channel *chan = &dev->channel[stream];
-	struct ngene_command com;
-	u16 BsUVI = ((stream & 1) ? 0x9400 : 0x9300);
-	u16 BsSDI = ((stream & 1) ? 0x9600 : 0x9500);
-	u16 BsSPI = ((stream & 1) ? 0x9800 : 0x9700);
-	u16 BsSDO = 0x9B00;
-
-	down(&dev->stream_mutex);
-	memset(&com, 0, sizeof(com));
-	com.cmd.hdr.Opcode = CMD_CONTROL;
-	com.cmd.hdr.Length = sizeof(struct FW_STREAM_CONTROL) - 2;
-	com.cmd.StreamControl.Stream = stream | (control ? 8 : 0);
-	if (chan->mode & NGENE_IO_TSOUT)
-		com.cmd.StreamControl.Stream |= 0x07;
-	com.cmd.StreamControl.Control = control |
-		(flags & SFLAG_ORDER_LUMA_CHROMA);
-	com.cmd.StreamControl.Mode = mode;
-	com.in_len = sizeof(struct FW_STREAM_CONTROL);
-	com.out_len = 0;
-
-	dprintk(KERN_INFO DEVICE_NAME
-		": Stream=%02x, Control=%02x, Mode=%02x\n",
-		com.cmd.StreamControl.Stream, com.cmd.StreamControl.Control,
-		com.cmd.StreamControl.Mode);
-
-	chan->Mode = mode;
-
-	if (!(control & 0x80)) {
-		spin_lock_irq(&chan->state_lock);
-		if (chan->State == KSSTATE_RUN) {
-			chan->State = KSSTATE_ACQUIRE;
-			chan->HWState = HWSTATE_STOP;
-			spin_unlock_irq(&chan->state_lock);
-			if (ngene_command(dev, &com) < 0) {
-				up(&dev->stream_mutex);
-				return -1;
-			}
-			/* clear_buffers(chan); */
-			flush_buffers(chan);
-			up(&dev->stream_mutex);
-			return 0;
-		}
-		spin_unlock_irq(&chan->state_lock);
-		up(&dev->stream_mutex);
-		return 0;
-	}
-
-	if (mode & SMODE_AUDIO_CAPTURE) {
-		com.cmd.StreamControl.CaptureBlockCount =
-			chan->Capture1Length / AUDIO_BLOCK_SIZE;
-		com.cmd.StreamControl.Buffer_Address = chan->RingBuffer.PAHead;
-	} else if (mode & SMODE_TRANSPORT_STREAM) {
-		com.cmd.StreamControl.CaptureBlockCount =
-			chan->Capture1Length / TS_BLOCK_SIZE;
-		com.cmd.StreamControl.MaxLinesPerField =
-			chan->Capture1Length / TS_BLOCK_SIZE;
-		com.cmd.StreamControl.Buffer_Address =
-			chan->TSRingBuffer.PAHead;
-		if (chan->mode & NGENE_IO_TSOUT) {
-			com.cmd.StreamControl.BytesPerVBILine =
-				chan->Capture1Length / TS_BLOCK_SIZE;
-			com.cmd.StreamControl.Stream |= 0x07;
-		}
-	} else {
-		com.cmd.StreamControl.BytesPerVideoLine = chan->nBytesPerLine;
-		com.cmd.StreamControl.MaxLinesPerField = chan->nLines;
-		com.cmd.StreamControl.MinLinesPerField = 100;
-		com.cmd.StreamControl.Buffer_Address = chan->RingBuffer.PAHead;
-
-		if (mode & SMODE_VBI_CAPTURE) {
-			com.cmd.StreamControl.MaxVBILinesPerField =
-				chan->nVBILines;
-			com.cmd.StreamControl.MinVBILinesPerField = 0;
-			com.cmd.StreamControl.BytesPerVBILine =
-				chan->nBytesPerVBILine;
-		}
-		if (flags & SFLAG_COLORBAR)
-			com.cmd.StreamControl.Stream |= 0x04;
-	}
-
-	spin_lock_irq(&chan->state_lock);
-	if (mode & SMODE_AUDIO_CAPTURE) {
-		chan->nextBuffer = chan->RingBuffer.Head;
-		if (mode & SMODE_AUDIO_SPDIF) {
-			com.cmd.StreamControl.SetupDataLen =
-				sizeof(SPDIFConfiguration);
-			com.cmd.StreamControl.SetupDataAddr = BsSPI;
-			memcpy(com.cmd.StreamControl.SetupData,
-			       SPDIFConfiguration, sizeof(SPDIFConfiguration));
-		} else {
-			com.cmd.StreamControl.SetupDataLen = 4;
-			com.cmd.StreamControl.SetupDataAddr = BsSDI;
-			memcpy(com.cmd.StreamControl.SetupData,
-			       I2SConfiguration +
-			       4 * dev->card_info->i2s[stream], 4);
-		}
-	} else if (mode & SMODE_TRANSPORT_STREAM) {
-		chan->nextBuffer = chan->TSRingBuffer.Head;
-		if (stream >= STREAM_AUDIOIN1) {
-			if (chan->mode & NGENE_IO_TSOUT) {
-				com.cmd.StreamControl.SetupDataLen =
-					sizeof(TS_I2SOutConfiguration);
-				com.cmd.StreamControl.SetupDataAddr = BsSDO;
-				memcpy(com.cmd.StreamControl.SetupData,
-				       TS_I2SOutConfiguration,
-				       sizeof(TS_I2SOutConfiguration));
-			} else {
-				com.cmd.StreamControl.SetupDataLen =
-					sizeof(TS_I2SConfiguration);
-				com.cmd.StreamControl.SetupDataAddr = BsSDI;
-				memcpy(com.cmd.StreamControl.SetupData,
-				       TS_I2SConfiguration,
-				       sizeof(TS_I2SConfiguration));
-			}
-		} else {
-			com.cmd.StreamControl.SetupDataLen = 8;
-			com.cmd.StreamControl.SetupDataAddr = BsUVI + 0x10;
-			memcpy(com.cmd.StreamControl.SetupData,
-			       TSFeatureDecoderSetup +
-			       8 * dev->card_info->tsf[stream], 8);
-		}
-	} else {
-		chan->nextBuffer = chan->RingBuffer.Head;
-		com.cmd.StreamControl.SetupDataLen =
-			16 + sizeof(ITUFeatureDecoderSetup);
-		com.cmd.StreamControl.SetupDataAddr = BsUVI;
-		memcpy(com.cmd.StreamControl.SetupData,
-		       ITUDecoderSetup[chan->itumode], 16);
-		memcpy(com.cmd.StreamControl.SetupData + 16,
-		       ITUFeatureDecoderSetup, sizeof(ITUFeatureDecoderSetup));
-	}
-	clear_buffers(chan);
-	chan->State = KSSTATE_RUN;
-	if (mode & SMODE_TRANSPORT_STREAM)
-		chan->HWState = HWSTATE_RUN;
-	else
-		chan->HWState = HWSTATE_STARTUP;
-	spin_unlock_irq(&chan->state_lock);
-
-	if (ngene_command(dev, &com) < 0) {
-		up(&dev->stream_mutex);
-		return -1;
-	}
-	up(&dev->stream_mutex);
-	return 0;
-}
-
-void set_transfer(struct ngene_channel *chan, int state)
-{
-	u8 control = 0, mode = 0, flags = 0;
-	struct ngene *dev = chan->dev;
-	int ret;
-
-	/*
-	printk(KERN_INFO DEVICE_NAME ": st %d\n", state);
-	msleep(100);
-	*/
-
-	if (state) {
-		if (chan->running) {
-			printk(KERN_INFO DEVICE_NAME ": already running\n");
-			return;
-		}
-	} else {
-		if (!chan->running) {
-			printk(KERN_INFO DEVICE_NAME ": already stopped\n");
-			return;
-		}
-	}
-
-	if (dev->card_info->switch_ctrl)
-		dev->card_info->switch_ctrl(chan, 1, state ^ 1);
-
-	if (state) {
-		spin_lock_irq(&chan->state_lock);
-
-		/* printk(KERN_INFO DEVICE_NAME ": lock=%08x\n",
-			  ngreadl(0x9310)); */
-		dvb_ringbuffer_flush(&dev->tsout_rbuf);
-		control = 0x80;
-		if (chan->mode & (NGENE_IO_TSIN | NGENE_IO_TSOUT)) {
-			chan->Capture1Length = 512 * 188;
-			mode = SMODE_TRANSPORT_STREAM;
-		}
-		if (chan->mode & NGENE_IO_TSOUT) {
-			chan->pBufferExchange = tsout_exchange;
-			/* 0x66666666 = 50MHz *2^33 /250MHz */
-			chan->AudioDTOValue = 0x80000000;
-			chan->AudioDTOUpdated = 1;
-		}
-		if (chan->mode & NGENE_IO_TSIN)
-			chan->pBufferExchange = tsin_exchange;
-		spin_unlock_irq(&chan->state_lock);
-	} else
-		;/* printk(KERN_INFO DEVICE_NAME ": lock=%08x\n",
-			   ngreadl(0x9310)); */
-
-	ret = ngene_command_stream_control(dev, chan->number,
-					   control, mode, flags);
-	if (!ret)
-		chan->running = state;
-	else
-		printk(KERN_ERR DEVICE_NAME ": set_transfer %d failed\n",
-		       state);
-	if (!state) {
-		spin_lock_irq(&chan->state_lock);
-		chan->pBufferExchange = NULL;
-		dvb_ringbuffer_flush(&dev->tsout_rbuf);
-		spin_unlock_irq(&chan->state_lock);
-	}
-}
-
-
-/****************************************************************************/
-/* nGene hardware init and release functions ********************************/
-/****************************************************************************/
-
-static void free_ringbuffer(struct ngene *dev, struct SRingBufferDescriptor *rb)
-{
-	struct SBufferHeader *Cur = rb->Head;
-	u32 j;
-
-	if (!Cur)
-		return;
-
-	for (j = 0; j < rb->NumBuffers; j++, Cur = Cur->Next) {
-		if (Cur->Buffer1)
-			pci_free_consistent(dev->pci_dev,
-					    rb->Buffer1Length,
-					    Cur->Buffer1,
-					    Cur->scList1->Address);
-
-		if (Cur->Buffer2)
-			pci_free_consistent(dev->pci_dev,
-					    rb->Buffer2Length,
-					    Cur->Buffer2,
-					    Cur->scList2->Address);
-	}
-
-	if (rb->SCListMem)
-		pci_free_consistent(dev->pci_dev, rb->SCListMemSize,
-				    rb->SCListMem, rb->PASCListMem);
-
-	pci_free_consistent(dev->pci_dev, rb->MemSize, rb->Head, rb->PAHead);
-}
-
-static void free_idlebuffer(struct ngene *dev,
-		     struct SRingBufferDescriptor *rb,
-		     struct SRingBufferDescriptor *tb)
-{
-	int j;
-	struct SBufferHeader *Cur = tb->Head;
-
-	if (!rb->Head)
-		return;
-	free_ringbuffer(dev, rb);
-	for (j = 0; j < tb->NumBuffers; j++, Cur = Cur->Next) {
-		Cur->Buffer2 = NULL;
-		Cur->scList2 = NULL;
-		Cur->ngeneBuffer.Address_of_first_entry_2 = 0;
-		Cur->ngeneBuffer.Number_of_entries_2 = 0;
-	}
-}
-
-static void free_common_buffers(struct ngene *dev)
-{
-	u32 i;
-	struct ngene_channel *chan;
-
-	for (i = STREAM_VIDEOIN1; i < MAX_STREAM; i++) {
-		chan = &dev->channel[i];
-		free_idlebuffer(dev, &chan->TSIdleBuffer, &chan->TSRingBuffer);
-		free_ringbuffer(dev, &chan->RingBuffer);
-		free_ringbuffer(dev, &chan->TSRingBuffer);
-	}
-
-	if (dev->OverflowBuffer)
-		pci_free_consistent(dev->pci_dev,
-				    OVERFLOW_BUFFER_SIZE,
-				    dev->OverflowBuffer, dev->PAOverflowBuffer);
-
-	if (dev->FWInterfaceBuffer)
-		pci_free_consistent(dev->pci_dev,
-				    4096,
-				    dev->FWInterfaceBuffer,
-				    dev->PAFWInterfaceBuffer);
-}
-
-/****************************************************************************/
-/* Ring buffer handling *****************************************************/
-/****************************************************************************/
-
-static int create_ring_buffer(struct pci_dev *pci_dev,
-		       struct SRingBufferDescriptor *descr, u32 NumBuffers)
-{
-	dma_addr_t tmp;
-	struct SBufferHeader *Head;
-	u32 i;
-	u32 MemSize = SIZEOF_SBufferHeader * NumBuffers;
-	u64 PARingBufferHead;
-	u64 PARingBufferCur;
-	u64 PARingBufferNext;
-	struct SBufferHeader *Cur, *Next;
-
-	descr->Head = NULL;
-	descr->MemSize = 0;
-	descr->PAHead = 0;
-	descr->NumBuffers = 0;
-
-	if (MemSize < 4096)
-		MemSize = 4096;
-
-	Head = pci_alloc_consistent(pci_dev, MemSize, &tmp);
-	PARingBufferHead = tmp;
-
-	if (!Head)
-		return -ENOMEM;
-
-	memset(Head, 0, MemSize);
-
-	PARingBufferCur = PARingBufferHead;
-	Cur = Head;
-
-	for (i = 0; i < NumBuffers - 1; i++) {
-		Next = (struct SBufferHeader *)
-			(((u8 *) Cur) + SIZEOF_SBufferHeader);
-		PARingBufferNext = PARingBufferCur + SIZEOF_SBufferHeader;
-		Cur->Next = Next;
-		Cur->ngeneBuffer.Next = PARingBufferNext;
-		Cur = Next;
-		PARingBufferCur = PARingBufferNext;
-	}
-	/* Last Buffer points back to first one */
-	Cur->Next = Head;
-	Cur->ngeneBuffer.Next = PARingBufferHead;
-
-	descr->Head       = Head;
-	descr->MemSize    = MemSize;
-	descr->PAHead     = PARingBufferHead;
-	descr->NumBuffers = NumBuffers;
-
-	return 0;
-}
-
-static int AllocateRingBuffers(struct pci_dev *pci_dev,
-			       dma_addr_t of,
-			       struct SRingBufferDescriptor *pRingBuffer,
-			       u32 Buffer1Length, u32 Buffer2Length)
-{
-	dma_addr_t tmp;
-	u32 i, j;
-	int status = 0;
-	u32 SCListMemSize = pRingBuffer->NumBuffers
-		* ((Buffer2Length != 0) ? (NUM_SCATTER_GATHER_ENTRIES * 2) :
-		    NUM_SCATTER_GATHER_ENTRIES)
-		* sizeof(struct HW_SCATTER_GATHER_ELEMENT);
-
-	u64 PASCListMem;
-	struct HW_SCATTER_GATHER_ELEMENT *SCListEntry;
-	u64 PASCListEntry;
-	struct SBufferHeader *Cur;
-	void *SCListMem;
-
-	if (SCListMemSize < 4096)
-		SCListMemSize = 4096;
-
-	SCListMem = pci_alloc_consistent(pci_dev, SCListMemSize, &tmp);
-
-	PASCListMem = tmp;
-	if (SCListMem == NULL)
-		return -ENOMEM;
-
-	memset(SCListMem, 0, SCListMemSize);
-
-	pRingBuffer->SCListMem = SCListMem;
-	pRingBuffer->PASCListMem = PASCListMem;
-	pRingBuffer->SCListMemSize = SCListMemSize;
-	pRingBuffer->Buffer1Length = Buffer1Length;
-	pRingBuffer->Buffer2Length = Buffer2Length;
-
-	SCListEntry = SCListMem;
-	PASCListEntry = PASCListMem;
-	Cur = pRingBuffer->Head;
-
-	for (i = 0; i < pRingBuffer->NumBuffers; i += 1, Cur = Cur->Next) {
-		u64 PABuffer;
-
-		void *Buffer = pci_alloc_consistent(pci_dev, Buffer1Length,
-						    &tmp);
-		PABuffer = tmp;
-
-		if (Buffer == NULL)
-			return -ENOMEM;
-
-		Cur->Buffer1 = Buffer;
-
-		SCListEntry->Address = PABuffer;
-		SCListEntry->Length  = Buffer1Length;
-
-		Cur->scList1 = SCListEntry;
-		Cur->ngeneBuffer.Address_of_first_entry_1 = PASCListEntry;
-		Cur->ngeneBuffer.Number_of_entries_1 =
-			NUM_SCATTER_GATHER_ENTRIES;
-
-		SCListEntry += 1;
-		PASCListEntry += sizeof(struct HW_SCATTER_GATHER_ELEMENT);
-
-#if NUM_SCATTER_GATHER_ENTRIES > 1
-		for (j = 0; j < NUM_SCATTER_GATHER_ENTRIES - 1; j += 1) {
-			SCListEntry->Address = of;
-			SCListEntry->Length = OVERFLOW_BUFFER_SIZE;
-			SCListEntry += 1;
-			PASCListEntry +=
-				sizeof(struct HW_SCATTER_GATHER_ELEMENT);
-		}
-#endif
-
-		if (!Buffer2Length)
-			continue;
-
-		Buffer = pci_alloc_consistent(pci_dev, Buffer2Length, &tmp);
-		PABuffer = tmp;
-
-		if (Buffer == NULL)
-			return -ENOMEM;
-
-		Cur->Buffer2 = Buffer;
-
-		SCListEntry->Address = PABuffer;
-		SCListEntry->Length  = Buffer2Length;
-
-		Cur->scList2 = SCListEntry;
-		Cur->ngeneBuffer.Address_of_first_entry_2 = PASCListEntry;
-		Cur->ngeneBuffer.Number_of_entries_2 =
-			NUM_SCATTER_GATHER_ENTRIES;
-
-		SCListEntry   += 1;
-		PASCListEntry += sizeof(struct HW_SCATTER_GATHER_ELEMENT);
-
-#if NUM_SCATTER_GATHER_ENTRIES > 1
-		for (j = 0; j < NUM_SCATTER_GATHER_ENTRIES - 1; j++) {
-			SCListEntry->Address = of;
-			SCListEntry->Length = OVERFLOW_BUFFER_SIZE;
-			SCListEntry += 1;
-			PASCListEntry +=
-				sizeof(struct HW_SCATTER_GATHER_ELEMENT);
-		}
-#endif
-
-	}
-
-	return status;
-}
-
-static int FillTSIdleBuffer(struct SRingBufferDescriptor *pIdleBuffer,
-			    struct SRingBufferDescriptor *pRingBuffer)
-{
-	int status = 0;
-
-	/* Copy pointer to scatter gather list in TSRingbuffer
-	   structure for buffer 2
-	   Load number of buffer
-	*/
-	u32 n = pRingBuffer->NumBuffers;
-
-	/* Point to first buffer entry */
-	struct SBufferHeader *Cur = pRingBuffer->Head;
-	int i;
-	/* Loop thru all buffer and set Buffer 2 pointers to TSIdlebuffer */
-	for (i = 0; i < n; i++) {
-		Cur->Buffer2 = pIdleBuffer->Head->Buffer1;
-		Cur->scList2 = pIdleBuffer->Head->scList1;
-		Cur->ngeneBuffer.Address_of_first_entry_2 =
-			pIdleBuffer->Head->ngeneBuffer.
-			Address_of_first_entry_1;
-		Cur->ngeneBuffer.Number_of_entries_2 =
-			pIdleBuffer->Head->ngeneBuffer.Number_of_entries_1;
-		Cur = Cur->Next;
-	}
-	return status;
-}
-
-static u32 RingBufferSizes[MAX_STREAM] = {
-	RING_SIZE_VIDEO,
-	RING_SIZE_VIDEO,
-	RING_SIZE_AUDIO,
-	RING_SIZE_AUDIO,
-	RING_SIZE_AUDIO,
-};
-
-static u32 Buffer1Sizes[MAX_STREAM] = {
-	MAX_VIDEO_BUFFER_SIZE,
-	MAX_VIDEO_BUFFER_SIZE,
-	MAX_AUDIO_BUFFER_SIZE,
-	MAX_AUDIO_BUFFER_SIZE,
-	MAX_AUDIO_BUFFER_SIZE
-};
-
-static u32 Buffer2Sizes[MAX_STREAM] = {
-	MAX_VBI_BUFFER_SIZE,
-	MAX_VBI_BUFFER_SIZE,
-	0,
-	0,
-	0
-};
-
-
-static int AllocCommonBuffers(struct ngene *dev)
-{
-	int status = 0, i;
-
-	dev->FWInterfaceBuffer = pci_alloc_consistent(dev->pci_dev, 4096,
-						     &dev->PAFWInterfaceBuffer);
-	if (!dev->FWInterfaceBuffer)
-		return -ENOMEM;
-	dev->hosttongene = dev->FWInterfaceBuffer;
-	dev->ngenetohost = dev->FWInterfaceBuffer + 256;
-	dev->EventBuffer = dev->FWInterfaceBuffer + 512;
-
-	dev->OverflowBuffer = pci_alloc_consistent(dev->pci_dev,
-						   OVERFLOW_BUFFER_SIZE,
-						   &dev->PAOverflowBuffer);
-	if (!dev->OverflowBuffer)
-		return -ENOMEM;
-	memset(dev->OverflowBuffer, 0, OVERFLOW_BUFFER_SIZE);
-
-	for (i = STREAM_VIDEOIN1; i < MAX_STREAM; i++) {
-		int type = dev->card_info->io_type[i];
-
-		dev->channel[i].State = KSSTATE_STOP;
-
-		if (type & (NGENE_IO_TV | NGENE_IO_HDTV | NGENE_IO_AIN)) {
-			status = create_ring_buffer(dev->pci_dev,
-						    &dev->channel[i].RingBuffer,
-						    RingBufferSizes[i]);
-			if (status < 0)
-				break;
-
-			if (type & (NGENE_IO_TV | NGENE_IO_AIN)) {
-				status = AllocateRingBuffers(dev->pci_dev,
-							     dev->
-							     PAOverflowBuffer,
-							     &dev->channel[i].
-							     RingBuffer,
-							     Buffer1Sizes[i],
-							     Buffer2Sizes[i]);
-				if (status < 0)
-					break;
-			} else if (type & NGENE_IO_HDTV) {
-				status = AllocateRingBuffers(dev->pci_dev,
-							     dev->
-							     PAOverflowBuffer,
-							     &dev->channel[i].
-							     RingBuffer,
-							   MAX_HDTV_BUFFER_SIZE,
-							     0);
-				if (status < 0)
-					break;
-			}
-		}
-
-		if (type & (NGENE_IO_TSIN | NGENE_IO_TSOUT)) {
-
-			status = create_ring_buffer(dev->pci_dev,
-						    &dev->channel[i].
-						    TSRingBuffer, RING_SIZE_TS);
-			if (status < 0)
-				break;
-
-			status = AllocateRingBuffers(dev->pci_dev,
-						     dev->PAOverflowBuffer,
-						     &dev->channel[i].
-						     TSRingBuffer,
-						     MAX_TS_BUFFER_SIZE, 0);
-			if (status)
-				break;
-		}
-
-		if (type & NGENE_IO_TSOUT) {
-			status = create_ring_buffer(dev->pci_dev,
-						    &dev->channel[i].
-						    TSIdleBuffer, 1);
-			if (status < 0)
-				break;
-			status = AllocateRingBuffers(dev->pci_dev,
-						     dev->PAOverflowBuffer,
-						     &dev->channel[i].
-						     TSIdleBuffer,
-						     MAX_TS_BUFFER_SIZE, 0);
-			if (status)
-				break;
-			FillTSIdleBuffer(&dev->channel[i].TSIdleBuffer,
-					 &dev->channel[i].TSRingBuffer);
-		}
-	}
-	return status;
-}
-
-static void ngene_release_buffers(struct ngene *dev)
-{
-	if (dev->iomem)
-		iounmap(dev->iomem);
-	free_common_buffers(dev);
-	vfree(dev->tsout_buf);
-	vfree(dev->tsin_buf);
-	vfree(dev->ain_buf);
-	vfree(dev->vin_buf);
-	vfree(dev);
-}
-
-static int ngene_get_buffers(struct ngene *dev)
-{
-	if (AllocCommonBuffers(dev))
-		return -ENOMEM;
-	if (dev->card_info->io_type[4] & NGENE_IO_TSOUT) {
-		dev->tsout_buf = vmalloc(TSOUT_BUF_SIZE);
-		if (!dev->tsout_buf)
-			return -ENOMEM;
-		dvb_ringbuffer_init(&dev->tsout_rbuf,
-				    dev->tsout_buf, TSOUT_BUF_SIZE);
-	}
-	if (dev->card_info->io_type[2]&NGENE_IO_TSIN) {
-		dev->tsin_buf = vmalloc(TSIN_BUF_SIZE);
-		if (!dev->tsin_buf)
-			return -ENOMEM;
-		dvb_ringbuffer_init(&dev->tsin_rbuf,
-				    dev->tsin_buf, TSIN_BUF_SIZE);
-	}
-	if (dev->card_info->io_type[2] & NGENE_IO_AIN) {
-		dev->ain_buf = vmalloc(AIN_BUF_SIZE);
-		if (!dev->ain_buf)
-			return -ENOMEM;
-		dvb_ringbuffer_init(&dev->ain_rbuf, dev->ain_buf, AIN_BUF_SIZE);
-	}
-	if (dev->card_info->io_type[0] & NGENE_IO_HDTV) {
-		dev->vin_buf = vmalloc(VIN_BUF_SIZE);
-		if (!dev->vin_buf)
-			return -ENOMEM;
-		dvb_ringbuffer_init(&dev->vin_rbuf, dev->vin_buf, VIN_BUF_SIZE);
-	}
-	dev->iomem = ioremap(pci_resource_start(dev->pci_dev, 0),
-			     pci_resource_len(dev->pci_dev, 0));
-	if (!dev->iomem)
-		return -ENOMEM;
-
-	return 0;
-}
-
-static void ngene_init(struct ngene *dev)
-{
-	int i;
-
-	tasklet_init(&dev->event_tasklet, event_tasklet, (unsigned long)dev);
-
-	memset_io(dev->iomem + 0xc000, 0x00, 0x220);
-	memset_io(dev->iomem + 0xc400, 0x00, 0x100);
-
-	for (i = 0; i < MAX_STREAM; i++) {
-		dev->channel[i].dev = dev;
-		dev->channel[i].number = i;
-	}
-
-	dev->fw_interface_version = 0;
-
-	ngwritel(0, NGENE_INT_ENABLE);
-
-	dev->icounts = ngreadl(NGENE_INT_COUNTS);
-
-	dev->device_version = ngreadl(DEV_VER) & 0x0f;
-	printk(KERN_INFO DEVICE_NAME ": Device version %d\n",
-	       dev->device_version);
-}
-
-static int ngene_load_firm(struct ngene *dev)
-{
-	u32 size;
-	const struct firmware *fw = NULL;
-	u8 *ngene_fw;
-	char *fw_name;
-	int err, version;
-
-	version = dev->card_info->fw_version;
-
-	switch (version) {
-	default:
-	case 15:
-		version = 15;
-		size = 23466;
-		fw_name = "ngene_15.fw";
-		dev->cmd_timeout_workaround = true;
-		break;
-	case 16:
-		size = 23498;
-		fw_name = "ngene_16.fw";
-		dev->cmd_timeout_workaround = true;
-		break;
-	case 17:
-		size = 24446;
-		fw_name = "ngene_17.fw";
-		dev->cmd_timeout_workaround = true;
-		break;
-	case 18:
-		size = 0;
-		fw_name = "ngene_18.fw";
-		break;
-	}
-
-	if (request_firmware(&fw, fw_name, &dev->pci_dev->dev) < 0) {
-		printk(KERN_ERR DEVICE_NAME
-			": Could not load firmware file %s.\n", fw_name);
-		printk(KERN_INFO DEVICE_NAME
-			": Copy %s to your hotplug directory!\n", fw_name);
-		return -1;
-	}
-	if (size == 0)
-		size = fw->size;
-	if (size != fw->size) {
-		printk(KERN_ERR DEVICE_NAME
-			": Firmware %s has invalid size!", fw_name);
-		err = -1;
-	} else {
-		printk(KERN_INFO DEVICE_NAME
-			": Loading firmware file %s.\n", fw_name);
-		ngene_fw = (u8 *) fw->data;
-		err = ngene_command_load_firmware(dev, ngene_fw, size);
-	}
-
-	release_firmware(fw);
-
-	return err;
-}
-
-static void ngene_stop(struct ngene *dev)
-{
-	down(&dev->cmd_mutex);
-	i2c_del_adapter(&(dev->channel[0].i2c_adapter));
-	i2c_del_adapter(&(dev->channel[1].i2c_adapter));
-	ngwritel(0, NGENE_INT_ENABLE);
-	ngwritel(0, NGENE_COMMAND);
-	ngwritel(0, NGENE_COMMAND_HI);
-	ngwritel(0, NGENE_STATUS);
-	ngwritel(0, NGENE_STATUS_HI);
-	ngwritel(0, NGENE_EVENT);
-	ngwritel(0, NGENE_EVENT_HI);
-	free_irq(dev->pci_dev->irq, dev);
-#ifdef CONFIG_PCI_MSI
-	if (dev->msi_enabled)
-		pci_disable_msi(dev->pci_dev);
-#endif
-}
-
-static int ngene_buffer_config(struct ngene *dev)
-{
-	int stat;
-
-	if (dev->card_info->fw_version >= 17) {
-		u8 tsin12_config[6]   = { 0x60, 0x60, 0x00, 0x00, 0x00, 0x00 };
-		u8 tsin1234_config[6] = { 0x30, 0x30, 0x00, 0x30, 0x30, 0x00 };
-		u8 tsio1235_config[6] = { 0x30, 0x30, 0x00, 0x28, 0x00, 0x38 };
-		u8 *bconf = tsin12_config;
-
-		if (dev->card_info->io_type[2]&NGENE_IO_TSIN &&
-		    dev->card_info->io_type[3]&NGENE_IO_TSIN) {
-			bconf = tsin1234_config;
-			if (dev->card_info->io_type[4]&NGENE_IO_TSOUT &&
-			    dev->ci.en)
-				bconf = tsio1235_config;
-		}
-		stat = ngene_command_config_free_buf(dev, bconf);
-	} else {
-		int bconf = BUFFER_CONFIG_4422;
-
-		if (dev->card_info->io_type[3] == NGENE_IO_TSIN)
-			bconf = BUFFER_CONFIG_3333;
-		stat = ngene_command_config_buf(dev, bconf);
-	}
-	return stat;
-}
-
-
-static int ngene_start(struct ngene *dev)
-{
-	int stat;
-	int i;
-
-	pci_set_master(dev->pci_dev);
-	ngene_init(dev);
-
-	stat = request_irq(dev->pci_dev->irq, irq_handler,
-			   IRQF_SHARED, "nGene",
-			   (void *)dev);
-	if (stat < 0)
-		return stat;
-
-	init_waitqueue_head(&dev->cmd_wq);
-	init_waitqueue_head(&dev->tx_wq);
-	init_waitqueue_head(&dev->rx_wq);
-	sema_init(&dev->cmd_mutex, 1);
-	sema_init(&dev->stream_mutex, 1);
-	sema_init(&dev->pll_mutex, 1);
-	sema_init(&dev->i2c_switch_mutex, 1);
-	spin_lock_init(&dev->cmd_lock);
-	for (i = 0; i < MAX_STREAM; i++)
-		spin_lock_init(&dev->channel[i].state_lock);
-	ngwritel(1, TIMESTAMPS);
-
-	ngwritel(1, NGENE_INT_ENABLE);
-
-	stat = ngene_load_firm(dev);
-	if (stat < 0)
-		goto fail;
-
-#ifdef CONFIG_PCI_MSI
-	/* enable MSI if kernel and card support it */
-	if (pci_msi_enabled() && dev->card_info->msi_supported) {
-		unsigned long flags;
-
-		ngwritel(0, NGENE_INT_ENABLE);
-		free_irq(dev->pci_dev->irq, dev);
-		stat = pci_enable_msi(dev->pci_dev);
-		if (stat) {
-			printk(KERN_INFO DEVICE_NAME
-				": MSI not available\n");
-			flags = IRQF_SHARED;
-		} else {
-			flags = 0;
-			dev->msi_enabled = true;
-		}
-		stat = request_irq(dev->pci_dev->irq, irq_handler,
-					flags, "nGene", dev);
-		if (stat < 0)
-			goto fail2;
-		ngwritel(1, NGENE_INT_ENABLE);
-	}
-#endif
-
-	stat = ngene_i2c_init(dev, 0);
-	if (stat < 0)
-		goto fail;
-
-	stat = ngene_i2c_init(dev, 1);
-	if (stat < 0)
-		goto fail;
-
-	return 0;
-
-fail:
-	ngwritel(0, NGENE_INT_ENABLE);
-	free_irq(dev->pci_dev->irq, dev);
-#ifdef CONFIG_PCI_MSI
-fail2:
-	if (dev->msi_enabled)
-		pci_disable_msi(dev->pci_dev);
-#endif
-	return stat;
-}
-
-/****************************************************************************/
-/****************************************************************************/
-/****************************************************************************/
-
-static void release_channel(struct ngene_channel *chan)
-{
-	struct dvb_demux *dvbdemux = &chan->demux;
-	struct ngene *dev = chan->dev;
-
-	if (chan->running)
-		set_transfer(chan, 0);
-
-	tasklet_kill(&chan->demux_tasklet);
-
-	if (chan->ci_dev) {
-		dvb_unregister_device(chan->ci_dev);
-		chan->ci_dev = NULL;
-	}
-
-	if (chan->fe2)
-		dvb_unregister_frontend(chan->fe2);
-
-	if (chan->fe) {
-		dvb_unregister_frontend(chan->fe);
-		dvb_frontend_detach(chan->fe);
-		chan->fe = NULL;
-	}
-
-	if (chan->has_demux) {
-		dvb_net_release(&chan->dvbnet);
-		dvbdemux->dmx.close(&dvbdemux->dmx);
-		dvbdemux->dmx.remove_frontend(&dvbdemux->dmx,
-					      &chan->hw_frontend);
-		dvbdemux->dmx.remove_frontend(&dvbdemux->dmx,
-					      &chan->mem_frontend);
-		dvb_dmxdev_release(&chan->dmxdev);
-		dvb_dmx_release(&chan->demux);
-		chan->has_demux = false;
-	}
-
-	if (chan->has_adapter) {
-		dvb_unregister_adapter(&dev->adapter[chan->number]);
-		chan->has_adapter = false;
-	}
-}
-
-static int init_channel(struct ngene_channel *chan)
-{
-	int ret = 0, nr = chan->number;
-	struct dvb_adapter *adapter = NULL;
-	struct dvb_demux *dvbdemux = &chan->demux;
-	struct ngene *dev = chan->dev;
-	struct ngene_info *ni = dev->card_info;
-	int io = ni->io_type[nr];
-
-	tasklet_init(&chan->demux_tasklet, demux_tasklet, (unsigned long)chan);
-	chan->users = 0;
-	chan->type = io;
-	chan->mode = chan->type;	/* for now only one mode */
-
-	if (io & NGENE_IO_TSIN) {
-		chan->fe = NULL;
-		if (ni->demod_attach[nr]) {
-			ret = ni->demod_attach[nr](chan);
-			if (ret < 0)
-				goto err;
-		}
-		if (chan->fe && ni->tuner_attach[nr]) {
-			ret = ni->tuner_attach[nr](chan);
-			if (ret < 0)
-				goto err;
-		}
-	}
-
-	if (!dev->ci.en && (io & NGENE_IO_TSOUT))
-		return 0;
-
-	if (io & (NGENE_IO_TSIN | NGENE_IO_TSOUT)) {
-		if (nr >= STREAM_AUDIOIN1)
-			chan->DataFormatFlags = DF_SWAP32;
-
-		if (nr == 0 || !one_adapter || dev->first_adapter == NULL) {
-			adapter = &dev->adapter[nr];
-			ret = dvb_register_adapter(adapter, "nGene",
-						   THIS_MODULE,
-						   &chan->dev->pci_dev->dev,
-						   adapter_nr);
-			if (ret < 0)
-				goto err;
-			if (dev->first_adapter == NULL)
-				dev->first_adapter = adapter;
-			chan->has_adapter = true;
-		} else
-			adapter = dev->first_adapter;
-	}
-
-	if (dev->ci.en && (io & NGENE_IO_TSOUT)) {
-		dvb_ca_en50221_init(adapter, dev->ci.en, 0, 1);
-		set_transfer(chan, 1);
-		chan->dev->channel[2].DataFormatFlags = DF_SWAP32;
-		set_transfer(&chan->dev->channel[2], 1);
-		dvb_register_device(adapter, &chan->ci_dev,
-				    &ngene_dvbdev_ci, (void *) chan,
-				    DVB_DEVICE_SEC);
-		if (!chan->ci_dev)
-			goto err;
-	}
-
-	if (chan->fe) {
-		if (dvb_register_frontend(adapter, chan->fe) < 0)
-			goto err;
-		chan->has_demux = true;
-	}
-	if (chan->fe2) {
-		if (dvb_register_frontend(adapter, chan->fe2) < 0)
-			goto err;
-		chan->fe2->tuner_priv = chan->fe->tuner_priv;
-		memcpy(&chan->fe2->ops.tuner_ops,
-		       &chan->fe->ops.tuner_ops,
-		       sizeof(struct dvb_tuner_ops));
-	}
-
-	if (chan->has_demux) {
-		ret = my_dvb_dmx_ts_card_init(dvbdemux, "SW demux",
-					      ngene_start_feed,
-					      ngene_stop_feed, chan);
-		ret = my_dvb_dmxdev_ts_card_init(&chan->dmxdev, &chan->demux,
-						 &chan->hw_frontend,
-						 &chan->mem_frontend, adapter);
-		ret = dvb_net_init(adapter, &chan->dvbnet, &chan->demux.dmx);
-	}
-
-	return ret;
-
-err:
-	if (chan->fe) {
-		dvb_frontend_detach(chan->fe);
-		chan->fe = NULL;
-	}
-	release_channel(chan);
-	return 0;
-}
-
-static int init_channels(struct ngene *dev)
-{
-	int i, j;
-
-	for (i = 0; i < MAX_STREAM; i++) {
-		dev->channel[i].number = i;
-		if (init_channel(&dev->channel[i]) < 0) {
-			for (j = i - 1; j >= 0; j--)
-				release_channel(&dev->channel[j]);
-			return -1;
-		}
-	}
-	return 0;
-}
-
-static struct cxd2099_cfg cxd_cfg = {
-	.bitrate = 62000,
-	.adr = 0x40,
-	.polarity = 0,
-	.clock_mode = 0,
-};
-
-static void cxd_attach(struct ngene *dev)
-{
-	struct ngene_ci *ci = &dev->ci;
-
-	ci->en = cxd2099_attach(&cxd_cfg, dev, &dev->channel[0].i2c_adapter);
-	ci->dev = dev;
-	return;
-}
-
-static void cxd_detach(struct ngene *dev)
-{
-	struct ngene_ci *ci = &dev->ci;
-
-	dvb_ca_en50221_release(ci->en);
-	kfree(ci->en);
-	ci->en = 0;
-}
-
-/***********************************/
-/* workaround for shutdown failure */
-/***********************************/
-
-static void ngene_unlink(struct ngene *dev)
-{
-	struct ngene_command com;
-
-	com.cmd.hdr.Opcode = CMD_MEM_WRITE;
-	com.cmd.hdr.Length = 3;
-	com.cmd.MemoryWrite.address = 0x910c;
-	com.cmd.MemoryWrite.data = 0xff;
-	com.in_len = 3;
-	com.out_len = 1;
-
-	down(&dev->cmd_mutex);
-	ngwritel(0, NGENE_INT_ENABLE);
-	ngene_command_mutex(dev, &com);
-	up(&dev->cmd_mutex);
-}
-
-void ngene_shutdown(struct pci_dev *pdev)
-{
-	struct ngene *dev = (struct ngene *)pci_get_drvdata(pdev);
-
-	if (!dev || !shutdown_workaround)
-		return;
-
-	printk(KERN_INFO DEVICE_NAME ": shutdown workaround...\n");
-	ngene_unlink(dev);
-	pci_disable_device(pdev);
-}
-
-/****************************************************************************/
-/* device probe/remove calls ************************************************/
-/****************************************************************************/
-
-void __devexit ngene_remove(struct pci_dev *pdev)
-{
-	struct ngene *dev = pci_get_drvdata(pdev);
-	int i;
-
-	tasklet_kill(&dev->event_tasklet);
-	for (i = MAX_STREAM - 1; i >= 0; i--)
-		release_channel(&dev->channel[i]);
-	if (dev->ci.en)
-		cxd_detach(dev);
-	ngene_stop(dev);
-	ngene_release_buffers(dev);
-	pci_set_drvdata(pdev, NULL);
-	pci_disable_device(pdev);
-}
-
-int __devinit ngene_probe(struct pci_dev *pci_dev,
-			  const struct pci_device_id *id)
-{
-	struct ngene *dev;
-	int stat = 0;
-
-	if (pci_enable_device(pci_dev) < 0)
-		return -ENODEV;
-
-	dev = vzalloc(sizeof(struct ngene));
-	if (dev == NULL) {
-		stat = -ENOMEM;
-		goto fail0;
-	}
-
-	dev->pci_dev = pci_dev;
-	dev->card_info = (struct ngene_info *)id->driver_data;
-	printk(KERN_INFO DEVICE_NAME ": Found %s\n", dev->card_info->name);
-
-	pci_set_drvdata(pci_dev, dev);
-
-	/* Alloc buffers and start nGene */
-	stat = ngene_get_buffers(dev);
-	if (stat < 0)
-		goto fail1;
-	stat = ngene_start(dev);
-	if (stat < 0)
-		goto fail1;
-
-	cxd_attach(dev);
-
-	stat = ngene_buffer_config(dev);
-	if (stat < 0)
-		goto fail1;
-
-
-	dev->i2c_current_bus = -1;
-
-	/* Register DVB adapters and devices for both channels */
-	if (init_channels(dev) < 0)
-		goto fail2;
-
-	return 0;
-
-fail2:
-	ngene_stop(dev);
-fail1:
-	ngene_release_buffers(dev);
-fail0:
-	pci_disable_device(pci_dev);
-	pci_set_drvdata(pci_dev, NULL);
-	return stat;
-}
diff --git a/drivers/media/dvb/ngene/ngene-dvb.c b/drivers/media/dvb/ngene/ngene-dvb.c
deleted file mode 100644
index fcb16a6..0000000
--- a/drivers/media/dvb/ngene/ngene-dvb.c
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * ngene-dvb.c: nGene PCIe bridge driver - DVB functions
- *
- * Copyright (C) 2005-2007 Micronas
- *
- * Copyright (C) 2008-2009 Ralph Metzler <rjkm@metzlerbros.de>
- *                         Modifications for new nGene firmware,
- *                         support for EEPROM-copying,
- *                         support for new dual DVB-S2 card prototype
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 only, as published by the Free Software Foundation.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
-#include <linux/io.h>
-#include <asm/div64.h>
-#include <linux/pci.h>
-#include <linux/timer.h>
-#include <linux/byteorder/generic.h>
-#include <linux/firmware.h>
-#include <linux/vmalloc.h>
-
-#include "ngene.h"
-
-
-/****************************************************************************/
-/* COMMAND API interface ****************************************************/
-/****************************************************************************/
-
-static ssize_t ts_write(struct file *file, const char *buf,
-			size_t count, loff_t *ppos)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct ngene_channel *chan = dvbdev->priv;
-	struct ngene *dev = chan->dev;
-
-	if (wait_event_interruptible(dev->tsout_rbuf.queue,
-				     dvb_ringbuffer_free
-				     (&dev->tsout_rbuf) >= count) < 0)
-		return 0;
-
-	dvb_ringbuffer_write(&dev->tsout_rbuf, buf, count);
-
-	return count;
-}
-
-static ssize_t ts_read(struct file *file, char *buf,
-		       size_t count, loff_t *ppos)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct ngene_channel *chan = dvbdev->priv;
-	struct ngene *dev = chan->dev;
-	int left, avail;
-
-	left = count;
-	while (left) {
-		if (wait_event_interruptible(
-			    dev->tsin_rbuf.queue,
-			    dvb_ringbuffer_avail(&dev->tsin_rbuf) > 0) < 0)
-			return -EAGAIN;
-		avail = dvb_ringbuffer_avail(&dev->tsin_rbuf);
-		if (avail > left)
-			avail = left;
-		dvb_ringbuffer_read_user(&dev->tsin_rbuf, buf, avail);
-		left -= avail;
-		buf += avail;
-	}
-	return count;
-}
-
-static const struct file_operations ci_fops = {
-	.owner   = THIS_MODULE,
-	.read    = ts_read,
-	.write   = ts_write,
-	.open    = dvb_generic_open,
-	.release = dvb_generic_release,
-};
-
-struct dvb_device ngene_dvbdev_ci = {
-	.priv    = 0,
-	.readers = -1,
-	.writers = -1,
-	.users   = -1,
-	.fops    = &ci_fops,
-};
-
-
-/****************************************************************************/
-/* DVB functions and API interface ******************************************/
-/****************************************************************************/
-
-static void swap_buffer(u32 *p, u32 len)
-{
-	while (len) {
-		*p = swab32(*p);
-		p++;
-		len -= 4;
-	}
-}
-
-/* start of filler packet */
-static u8 fill_ts[] = { 0x47, 0x1f, 0xff, 0x10, TS_FILLER };
-
-/* #define DEBUG_CI_XFER */
-#ifdef DEBUG_CI_XFER
-static u32 ok;
-static u32 overflow;
-static u32 stripped;
-#endif
-
-void *tsin_exchange(void *priv, void *buf, u32 len, u32 clock, u32 flags)
-{
-	struct ngene_channel *chan = priv;
-	struct ngene *dev = chan->dev;
-
-
-	if (flags & DF_SWAP32)
-		swap_buffer(buf, len);
-
-	if (dev->ci.en && chan->number == 2) {
-		while (len >= 188) {
-			if (memcmp(buf, fill_ts, sizeof fill_ts) != 0) {
-				if (dvb_ringbuffer_free(&dev->tsin_rbuf) >= 188) {
-					dvb_ringbuffer_write(&dev->tsin_rbuf, buf, 188);
-					wake_up(&dev->tsin_rbuf.queue);
-#ifdef DEBUG_CI_XFER
-					ok++;
-#endif
-				}
-#ifdef DEBUG_CI_XFER
-				else
-					overflow++;
-#endif
-			}
-#ifdef DEBUG_CI_XFER
-			else
-				stripped++;
-
-			if (ok % 100 == 0 && overflow)
-				printk(KERN_WARNING "%s: ok %u overflow %u dropped %u\n", __func__, ok, overflow, stripped);
-#endif
-			buf += 188;
-			len -= 188;
-		}
-		return NULL;
-	}
-
-	if (chan->users > 0)
-		dvb_dmx_swfilter(&chan->demux, buf, len);
-
-	return NULL;
-}
-
-void *tsout_exchange(void *priv, void *buf, u32 len, u32 clock, u32 flags)
-{
-	struct ngene_channel *chan = priv;
-	struct ngene *dev = chan->dev;
-	u32 alen;
-
-	alen = dvb_ringbuffer_avail(&dev->tsout_rbuf);
-	alen -= alen % 188;
-
-	if (alen < len)
-		FillTSBuffer(buf + alen, len - alen, flags);
-	else
-		alen = len;
-	dvb_ringbuffer_read(&dev->tsout_rbuf, buf, alen);
-	if (flags & DF_SWAP32)
-		swap_buffer((u32 *)buf, alen);
-	wake_up_interruptible(&dev->tsout_rbuf.queue);
-	return buf;
-}
-
-
-
-int ngene_start_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
-	struct ngene_channel *chan = dvbdmx->priv;
-
-	if (chan->users == 0) {
-		if (!chan->dev->cmd_timeout_workaround || !chan->running)
-			set_transfer(chan, 1);
-	}
-
-	return ++chan->users;
-}
-
-int ngene_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
-	struct ngene_channel *chan = dvbdmx->priv;
-
-	if (--chan->users)
-		return chan->users;
-
-	if (!chan->dev->cmd_timeout_workaround)
-		set_transfer(chan, 0);
-
-	return 0;
-}
-
-int my_dvb_dmx_ts_card_init(struct dvb_demux *dvbdemux, char *id,
-			    int (*start_feed)(struct dvb_demux_feed *),
-			    int (*stop_feed)(struct dvb_demux_feed *),
-			    void *priv)
-{
-	dvbdemux->priv = priv;
-
-	dvbdemux->filternum = 256;
-	dvbdemux->feednum = 256;
-	dvbdemux->start_feed = start_feed;
-	dvbdemux->stop_feed = stop_feed;
-	dvbdemux->write_to_decoder = NULL;
-	dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
-				      DMX_SECTION_FILTERING |
-				      DMX_MEMORY_BASED_FILTERING);
-	return dvb_dmx_init(dvbdemux);
-}
-
-int my_dvb_dmxdev_ts_card_init(struct dmxdev *dmxdev,
-			       struct dvb_demux *dvbdemux,
-			       struct dmx_frontend *hw_frontend,
-			       struct dmx_frontend *mem_frontend,
-			       struct dvb_adapter *dvb_adapter)
-{
-	int ret;
-
-	dmxdev->filternum = 256;
-	dmxdev->demux = &dvbdemux->dmx;
-	dmxdev->capabilities = 0;
-	ret = dvb_dmxdev_init(dmxdev, dvb_adapter);
-	if (ret < 0)
-		return ret;
-
-	hw_frontend->source = DMX_FRONTEND_0;
-	dvbdemux->dmx.add_frontend(&dvbdemux->dmx, hw_frontend);
-	mem_frontend->source = DMX_MEMORY_FE;
-	dvbdemux->dmx.add_frontend(&dvbdemux->dmx, mem_frontend);
-	return dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, hw_frontend);
-}
diff --git a/drivers/media/dvb/ngene/ngene-i2c.c b/drivers/media/dvb/ngene/ngene-i2c.c
deleted file mode 100644
index d28554f..0000000
--- a/drivers/media/dvb/ngene/ngene-i2c.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * ngene-i2c.c: nGene PCIe bridge driver i2c functions
- *
- * Copyright (C) 2005-2007 Micronas
- *
- * Copyright (C) 2008-2009 Ralph Metzler <rjkm@metzlerbros.de>
- *                         Modifications for new nGene firmware,
- *                         support for EEPROM-copying,
- *                         support for new dual DVB-S2 card prototype
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 only, as published by the Free Software Foundation.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- */
-
-/* FIXME - some of these can probably be removed */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
-#include <linux/io.h>
-#include <asm/div64.h>
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-#include <linux/timer.h>
-#include <linux/byteorder/generic.h>
-#include <linux/firmware.h>
-#include <linux/vmalloc.h>
-
-#include "ngene.h"
-
-/* Firmware command for i2c operations */
-static int ngene_command_i2c_read(struct ngene *dev, u8 adr,
-			   u8 *out, u8 outlen, u8 *in, u8 inlen, int flag)
-{
-	struct ngene_command com;
-
-	com.cmd.hdr.Opcode = CMD_I2C_READ;
-	com.cmd.hdr.Length = outlen + 3;
-	com.cmd.I2CRead.Device = adr << 1;
-	memcpy(com.cmd.I2CRead.Data, out, outlen);
-	com.cmd.I2CRead.Data[outlen] = inlen;
-	com.cmd.I2CRead.Data[outlen + 1] = 0;
-	com.in_len = outlen + 3;
-	com.out_len = inlen + 1;
-
-	if (ngene_command(dev, &com) < 0)
-		return -EIO;
-
-	if ((com.cmd.raw8[0] >> 1) != adr)
-		return -EIO;
-
-	if (flag)
-		memcpy(in, com.cmd.raw8, inlen + 1);
-	else
-		memcpy(in, com.cmd.raw8 + 1, inlen);
-	return 0;
-}
-
-static int ngene_command_i2c_write(struct ngene *dev, u8 adr,
-				   u8 *out, u8 outlen)
-{
-	struct ngene_command com;
-
-
-	com.cmd.hdr.Opcode = CMD_I2C_WRITE;
-	com.cmd.hdr.Length = outlen + 1;
-	com.cmd.I2CRead.Device = adr << 1;
-	memcpy(com.cmd.I2CRead.Data, out, outlen);
-	com.in_len = outlen + 1;
-	com.out_len = 1;
-
-	if (ngene_command(dev, &com) < 0)
-		return -EIO;
-
-	if (com.cmd.raw8[0] == 1)
-		return -EIO;
-
-	return 0;
-}
-
-static void ngene_i2c_set_bus(struct ngene *dev, int bus)
-{
-	if (!(dev->card_info->i2c_access & 2))
-		return;
-	if (dev->i2c_current_bus == bus)
-		return;
-
-	switch (bus) {
-	case 0:
-		ngene_command_gpio_set(dev, 3, 0);
-		ngene_command_gpio_set(dev, 2, 1);
-		break;
-
-	case 1:
-		ngene_command_gpio_set(dev, 2, 0);
-		ngene_command_gpio_set(dev, 3, 1);
-		break;
-	}
-	dev->i2c_current_bus = bus;
-}
-
-static int ngene_i2c_master_xfer(struct i2c_adapter *adapter,
-				 struct i2c_msg msg[], int num)
-{
-	struct ngene_channel *chan =
-		(struct ngene_channel *)i2c_get_adapdata(adapter);
-	struct ngene *dev = chan->dev;
-
-	down(&dev->i2c_switch_mutex);
-	ngene_i2c_set_bus(dev, chan->number);
-
-	if (num == 2 && msg[1].flags & I2C_M_RD && !(msg[0].flags & I2C_M_RD))
-		if (!ngene_command_i2c_read(dev, msg[0].addr,
-					    msg[0].buf, msg[0].len,
-					    msg[1].buf, msg[1].len, 0))
-			goto done;
-
-	if (num == 1 && !(msg[0].flags & I2C_M_RD))
-		if (!ngene_command_i2c_write(dev, msg[0].addr,
-					     msg[0].buf, msg[0].len))
-			goto done;
-	if (num == 1 && (msg[0].flags & I2C_M_RD))
-		if (!ngene_command_i2c_read(dev, msg[0].addr, NULL, 0,
-					    msg[0].buf, msg[0].len, 0))
-			goto done;
-
-	up(&dev->i2c_switch_mutex);
-	return -EIO;
-
-done:
-	up(&dev->i2c_switch_mutex);
-	return num;
-}
-
-
-static u32 ngene_i2c_functionality(struct i2c_adapter *adap)
-{
-	return I2C_FUNC_SMBUS_EMUL;
-}
-
-static struct i2c_algorithm ngene_i2c_algo = {
-	.master_xfer = ngene_i2c_master_xfer,
-	.functionality = ngene_i2c_functionality,
-};
-
-int ngene_i2c_init(struct ngene *dev, int dev_nr)
-{
-	struct i2c_adapter *adap = &(dev->channel[dev_nr].i2c_adapter);
-
-	i2c_set_adapdata(adap, &(dev->channel[dev_nr]));
-
-	strcpy(adap->name, "nGene");
-
-	adap->algo = &ngene_i2c_algo;
-	adap->algo_data = (void *)&(dev->channel[dev_nr]);
-	adap->dev.parent = &dev->pci_dev->dev;
-
-	return i2c_add_adapter(adap);
-}
-
diff --git a/drivers/media/dvb/ngene/ngene.h b/drivers/media/dvb/ngene/ngene.h
deleted file mode 100644
index 5443dc0..0000000
--- a/drivers/media/dvb/ngene/ngene.h
+++ /dev/null
@@ -1,921 +0,0 @@
-/*
- * ngene.h: nGene PCIe bridge driver
- *
- * Copyright (C) 2005-2007 Micronas
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 only, as published by the Free Software Foundation.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef _NGENE_H_
-#define _NGENE_H_
-
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <asm/dma.h>
-#include <linux/scatterlist.h>
-
-#include <linux/dvb/frontend.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_ca_en50221.h"
-#include "dvb_frontend.h"
-#include "dvb_ringbuffer.h"
-#include "dvb_net.h"
-#include "cxd2099.h"
-
-#define DEVICE_NAME "ngene"
-
-#define NGENE_VID       0x18c3
-#define NGENE_PID       0x0720
-
-#ifndef VIDEO_CAP_VC1
-#define VIDEO_CAP_AVC   128
-#define VIDEO_CAP_H264  128
-#define VIDEO_CAP_VC1   256
-#define VIDEO_CAP_WMV9  256
-#define VIDEO_CAP_MPEG4 512
-#endif
-
-enum STREAM {
-	STREAM_VIDEOIN1 = 0,        /* ITU656 or TS Input */
-	STREAM_VIDEOIN2,
-	STREAM_AUDIOIN1,            /* I2S or SPI Input */
-	STREAM_AUDIOIN2,
-	STREAM_AUDIOOUT,
-	MAX_STREAM
-};
-
-enum SMODE_BITS {
-	SMODE_AUDIO_SPDIF = 0x20,
-	SMODE_AVSYNC = 0x10,
-	SMODE_TRANSPORT_STREAM = 0x08,
-	SMODE_AUDIO_CAPTURE = 0x04,
-	SMODE_VBI_CAPTURE = 0x02,
-	SMODE_VIDEO_CAPTURE = 0x01
-};
-
-enum STREAM_FLAG_BITS {
-	SFLAG_CHROMA_FORMAT_2COMP  = 0x01, /* Chroma Format : 2's complement */
-	SFLAG_CHROMA_FORMAT_OFFSET = 0x00, /* Chroma Format : Binary offset */
-	SFLAG_ORDER_LUMA_CHROMA    = 0x02, /* Byte order: Y,Cb,Y,Cr */
-	SFLAG_ORDER_CHROMA_LUMA    = 0x00, /* Byte order: Cb,Y,Cr,Y */
-	SFLAG_COLORBAR             = 0x04, /* Select colorbar */
-};
-
-#define PROGRAM_ROM     0x0000
-#define PROGRAM_SRAM    0x1000
-#define PERIPHERALS0    0x8000
-#define PERIPHERALS1    0x9000
-#define SHARED_BUFFER   0xC000
-
-#define HOST_TO_NGENE    (SHARED_BUFFER+0x0000)
-#define NGENE_TO_HOST    (SHARED_BUFFER+0x0100)
-#define NGENE_COMMAND    (SHARED_BUFFER+0x0200)
-#define NGENE_COMMAND_HI (SHARED_BUFFER+0x0204)
-#define NGENE_STATUS     (SHARED_BUFFER+0x0208)
-#define NGENE_STATUS_HI  (SHARED_BUFFER+0x020C)
-#define NGENE_EVENT      (SHARED_BUFFER+0x0210)
-#define NGENE_EVENT_HI   (SHARED_BUFFER+0x0214)
-#define VARIABLES        (SHARED_BUFFER+0x0210)
-
-#define NGENE_INT_COUNTS       (SHARED_BUFFER+0x0260)
-#define NGENE_INT_ENABLE       (SHARED_BUFFER+0x0264)
-#define NGENE_VBI_LINE_COUNT   (SHARED_BUFFER+0x0268)
-
-#define BUFFER_GP_XMIT  (SHARED_BUFFER+0x0800)
-#define BUFFER_GP_RECV  (SHARED_BUFFER+0x0900)
-#define EEPROM_AREA     (SHARED_BUFFER+0x0A00)
-
-#define SG_V_IN_1       (SHARED_BUFFER+0x0A80)
-#define SG_VBI_1        (SHARED_BUFFER+0x0B00)
-#define SG_A_IN_1       (SHARED_BUFFER+0x0B80)
-#define SG_V_IN_2       (SHARED_BUFFER+0x0C00)
-#define SG_VBI_2        (SHARED_BUFFER+0x0C80)
-#define SG_A_IN_2       (SHARED_BUFFER+0x0D00)
-#define SG_V_OUT        (SHARED_BUFFER+0x0D80)
-#define SG_A_OUT2       (SHARED_BUFFER+0x0E00)
-
-#define DATA_A_IN_1     (SHARED_BUFFER+0x0E80)
-#define DATA_A_IN_2     (SHARED_BUFFER+0x0F00)
-#define DATA_A_OUT      (SHARED_BUFFER+0x0F80)
-#define DATA_V_IN_1     (SHARED_BUFFER+0x1000)
-#define DATA_V_IN_2     (SHARED_BUFFER+0x2000)
-#define DATA_V_OUT      (SHARED_BUFFER+0x3000)
-
-#define DATA_FIFO_AREA  (SHARED_BUFFER+0x1000)
-
-#define TIMESTAMPS      0xA000
-#define SCRATCHPAD      0xA080
-#define FORCE_INT       0xA088
-#define FORCE_NMI       0xA090
-#define INT_STATUS      0xA0A0
-
-#define DEV_VER         0x9004
-
-#define FW_DEBUG_DEFAULT (PROGRAM_SRAM+0x00FF)
-
-struct SG_ADDR {
-	u64 start;
-	u64 curr;
-	u16 curr_ptr;
-	u16 elements;
-	u32 pad[3];
-} __attribute__ ((__packed__));
-
-struct SHARED_MEMORY {
-	/* C000 */
-	u32 HostToNgene[64];
-
-	/* C100 */
-	u32 NgeneToHost[64];
-
-	/* C200 */
-	u64 NgeneCommand;
-	u64 NgeneStatus;
-	u64 NgeneEvent;
-
-	/* C210 */
-	u8 pad1[0xc260 - 0xc218];
-
-	/* C260 */
-	u32 IntCounts;
-	u32 IntEnable;
-
-	/* C268 */
-	u8 pad2[0xd000 - 0xc268];
-
-} __attribute__ ((__packed__));
-
-struct BUFFER_STREAM_RESULTS {
-	u32 Clock;           /* Stream time in 100ns units */
-	u16 RemainingLines;  /* Remaining lines in this field.
-				0 for complete field */
-	u8  FieldCount;      /* Video field number */
-	u8  Flags;           /* Bit 7 = Done, Bit 6 = seen, Bit 5 = overflow,
-				Bit 0 = FieldID */
-	u16 BlockCount;      /* Audio block count (unused) */
-	u8  Reserved[2];
-	u32 DTOUpdate;
-} __attribute__ ((__packed__));
-
-struct HW_SCATTER_GATHER_ELEMENT {
-	u64 Address;
-	u32 Length;
-	u32 Reserved;
-} __attribute__ ((__packed__));
-
-struct BUFFER_HEADER {
-	u64    Next;
-	struct BUFFER_STREAM_RESULTS SR;
-
-	u32    Number_of_entries_1;
-	u32    Reserved5;
-	u64    Address_of_first_entry_1;
-
-	u32    Number_of_entries_2;
-	u32    Reserved7;
-	u64    Address_of_first_entry_2;
-} __attribute__ ((__packed__));
-
-struct EVENT_BUFFER {
-	u32    TimeStamp;
-	u8     GPIOStatus;
-	u8     UARTStatus;
-	u8     RXCharacter;
-	u8     EventStatus;
-	u32    Reserved[2];
-} __attribute__ ((__packed__));
-
-/* Firmware commands. */
-
-enum OPCODES {
-	CMD_NOP = 0,
-	CMD_FWLOAD_PREPARE  = 0x01,
-	CMD_FWLOAD_FINISH   = 0x02,
-	CMD_I2C_READ        = 0x03,
-	CMD_I2C_WRITE       = 0x04,
-
-	CMD_I2C_WRITE_NOSTOP = 0x05,
-	CMD_I2C_CONTINUE_WRITE = 0x06,
-	CMD_I2C_CONTINUE_WRITE_NOSTOP = 0x07,
-
-	CMD_DEBUG_OUTPUT    = 0x09,
-
-	CMD_CONTROL         = 0x10,
-	CMD_CONFIGURE_BUFFER = 0x11,
-	CMD_CONFIGURE_FREE_BUFFER = 0x12,
-
-	CMD_SPI_READ        = 0x13,
-	CMD_SPI_WRITE       = 0x14,
-
-	CMD_MEM_READ        = 0x20,
-	CMD_MEM_WRITE	    = 0x21,
-	CMD_SFR_READ	    = 0x22,
-	CMD_SFR_WRITE	    = 0x23,
-	CMD_IRAM_READ	    = 0x24,
-	CMD_IRAM_WRITE	    = 0x25,
-	CMD_SET_GPIO_PIN    = 0x26,
-	CMD_SET_GPIO_INT    = 0x27,
-	CMD_CONFIGURE_UART  = 0x28,
-	CMD_WRITE_UART      = 0x29,
-	MAX_CMD
-};
-
-enum RESPONSES {
-	OK = 0,
-	ERROR = 1
-};
-
-struct FW_HEADER {
-	u8 Opcode;
-	u8 Length;
-} __attribute__ ((__packed__));
-
-struct FW_I2C_WRITE {
-	struct FW_HEADER hdr;
-	u8 Device;
-	u8 Data[250];
-} __attribute__ ((__packed__));
-
-struct FW_I2C_CONTINUE_WRITE {
-	struct FW_HEADER hdr;
-	u8 Data[250];
-} __attribute__ ((__packed__));
-
-struct FW_I2C_READ {
-	struct FW_HEADER hdr;
-	u8 Device;
-	u8 Data[252];    /* followed by two bytes of read data count */
-} __attribute__ ((__packed__));
-
-struct FW_SPI_WRITE {
-	struct FW_HEADER hdr;
-	u8 ModeSelect;
-	u8 Data[250];
-} __attribute__ ((__packed__));
-
-struct FW_SPI_READ {
-	struct FW_HEADER hdr;
-	u8 ModeSelect;
-	u8 Data[252];    /* followed by two bytes of read data count */
-} __attribute__ ((__packed__));
-
-struct FW_FWLOAD_PREPARE {
-	struct FW_HEADER hdr;
-} __attribute__ ((__packed__));
-
-struct FW_FWLOAD_FINISH {
-	struct FW_HEADER hdr;
-	u16 Address;     /* address of final block */
-	u16 Length;
-} __attribute__ ((__packed__));
-
-/*
- * Meaning of FW_STREAM_CONTROL::Mode bits:
- *  Bit 7: Loopback PEXin to PEXout using TVOut channel
- *  Bit 6: AVLOOP
- *  Bit 5: Audio select; 0=I2S, 1=SPDIF
- *  Bit 4: AVSYNC
- *  Bit 3: Enable transport stream
- *  Bit 2: Enable audio capture
- *  Bit 1: Enable ITU-Video VBI capture
- *  Bit 0: Enable ITU-Video capture
- *
- * Meaning of FW_STREAM_CONTROL::Control bits (see UVI1_CTL)
- *  Bit 7: continuous capture
- *  Bit 6: capture one field
- *  Bit 5: capture one frame
- *  Bit 4: unused
- *  Bit 3: starting field; 0=odd, 1=even
- *  Bit 2: sample size; 0=8-bit, 1=10-bit
- *  Bit 1: data format; 0=UYVY, 1=YUY2
- *  Bit 0: resets buffer pointers
-*/
-
-enum FSC_MODE_BITS {
-	SMODE_LOOPBACK          = 0x80,
-	SMODE_AVLOOP            = 0x40,
-	_SMODE_AUDIO_SPDIF      = 0x20,
-	_SMODE_AVSYNC           = 0x10,
-	_SMODE_TRANSPORT_STREAM = 0x08,
-	_SMODE_AUDIO_CAPTURE    = 0x04,
-	_SMODE_VBI_CAPTURE      = 0x02,
-	_SMODE_VIDEO_CAPTURE    = 0x01
-};
-
-
-/* Meaning of FW_STREAM_CONTROL::Stream bits:
- * Bit 3: Audio sample count:  0 = relative, 1 = absolute
- * Bit 2: color bar select; 1=color bars, 0=CV3 decoder
- * Bits 1-0: stream select, UVI1, UVI2, TVOUT
- */
-
-struct FW_STREAM_CONTROL {
-	struct FW_HEADER hdr;
-	u8     Stream;             /* Stream number (UVI1, UVI2, TVOUT) */
-	u8     Control;            /* Value written to UVI1_CTL */
-	u8     Mode;               /* Controls clock source */
-	u8     SetupDataLen;	   /* Length of setup data, MSB=1 write
-				      backwards */
-	u16    CaptureBlockCount;  /* Blocks (a 256 Bytes) to capture per buffer
-				      for TS and Audio */
-	u64    Buffer_Address;	   /* Address of first buffer header */
-	u16    BytesPerVideoLine;
-	u16    MaxLinesPerField;
-	u16    MinLinesPerField;
-	u16    Reserved_1;
-	u16    BytesPerVBILine;
-	u16    MaxVBILinesPerField;
-	u16    MinVBILinesPerField;
-	u16    SetupDataAddr;      /* ngene relative address of setup data */
-	u8     SetupData[32];      /* setup data */
-} __attribute__((__packed__));
-
-#define AUDIO_BLOCK_SIZE    256
-#define TS_BLOCK_SIZE       256
-
-struct FW_MEM_READ {
-	struct FW_HEADER hdr;
-	u16   address;
-} __attribute__ ((__packed__));
-
-struct FW_MEM_WRITE {
-	struct FW_HEADER hdr;
-	u16   address;
-	u8    data;
-} __attribute__ ((__packed__));
-
-struct FW_SFR_IRAM_READ {
-	struct FW_HEADER hdr;
-	u8    address;
-} __attribute__ ((__packed__));
-
-struct FW_SFR_IRAM_WRITE {
-	struct FW_HEADER hdr;
-	u8    address;
-	u8    data;
-} __attribute__ ((__packed__));
-
-struct FW_SET_GPIO_PIN {
-	struct FW_HEADER hdr;
-	u8    select;
-} __attribute__ ((__packed__));
-
-struct FW_SET_GPIO_INT {
-	struct FW_HEADER hdr;
-	u8    select;
-} __attribute__ ((__packed__));
-
-struct FW_SET_DEBUGMODE {
-	struct FW_HEADER hdr;
-	u8   debug_flags;
-} __attribute__ ((__packed__));
-
-struct FW_CONFIGURE_BUFFERS {
-	struct FW_HEADER hdr;
-	u8   config;
-} __attribute__ ((__packed__));
-
-enum _BUFFER_CONFIGS {
-	/* 4k UVI1, 4k UVI2, 2k AUD1, 2k AUD2  (standard usage) */
-	BUFFER_CONFIG_4422 = 0,
-	/* 3k UVI1, 3k UVI2, 3k AUD1, 3k AUD2  (4x TS input usage) */
-	BUFFER_CONFIG_3333 = 1,
-	/* 8k UVI1, 0k UVI2, 2k AUD1, 2k I2SOut  (HDTV decoder usage) */
-	BUFFER_CONFIG_8022 = 2,
-	BUFFER_CONFIG_FW17 = 255, /* Use new FW 17 command */
-};
-
-struct FW_CONFIGURE_FREE_BUFFERS {
-	struct FW_HEADER hdr;
-	u8   UVI1_BufferLength;
-	u8   UVI2_BufferLength;
-	u8   TVO_BufferLength;
-	u8   AUD1_BufferLength;
-	u8   AUD2_BufferLength;
-	u8   TVA_BufferLength;
-} __attribute__ ((__packed__));
-
-struct FW_CONFIGURE_UART {
-	struct FW_HEADER hdr;
-	u8 UartControl;
-} __attribute__ ((__packed__));
-
-enum _UART_CONFIG {
-	_UART_BAUDRATE_19200 = 0,
-	_UART_BAUDRATE_9600  = 1,
-	_UART_BAUDRATE_4800  = 2,
-	_UART_BAUDRATE_2400  = 3,
-	_UART_RX_ENABLE      = 0x40,
-	_UART_TX_ENABLE      = 0x80,
-};
-
-struct FW_WRITE_UART {
-	struct FW_HEADER hdr;
-	u8 Data[252];
-} __attribute__ ((__packed__));
-
-
-struct ngene_command {
-	u32 in_len;
-	u32 out_len;
-	union {
-		u32                              raw[64];
-		u8                               raw8[256];
-		struct FW_HEADER                 hdr;
-		struct FW_I2C_WRITE              I2CWrite;
-		struct FW_I2C_CONTINUE_WRITE     I2CContinueWrite;
-		struct FW_I2C_READ               I2CRead;
-		struct FW_STREAM_CONTROL         StreamControl;
-		struct FW_FWLOAD_PREPARE         FWLoadPrepare;
-		struct FW_FWLOAD_FINISH          FWLoadFinish;
-		struct FW_MEM_READ		 MemoryRead;
-		struct FW_MEM_WRITE		 MemoryWrite;
-		struct FW_SFR_IRAM_READ		 SfrIramRead;
-		struct FW_SFR_IRAM_WRITE         SfrIramWrite;
-		struct FW_SPI_WRITE              SPIWrite;
-		struct FW_SPI_READ               SPIRead;
-		struct FW_SET_GPIO_PIN           SetGpioPin;
-		struct FW_SET_GPIO_INT           SetGpioInt;
-		struct FW_SET_DEBUGMODE          SetDebugMode;
-		struct FW_CONFIGURE_BUFFERS      ConfigureBuffers;
-		struct FW_CONFIGURE_FREE_BUFFERS ConfigureFreeBuffers;
-		struct FW_CONFIGURE_UART         ConfigureUart;
-		struct FW_WRITE_UART             WriteUart;
-	} cmd;
-} __attribute__ ((__packed__));
-
-#define NGENE_INTERFACE_VERSION 0x103
-#define MAX_VIDEO_BUFFER_SIZE   (417792) /* 288*1440 rounded up to next page */
-#define MAX_AUDIO_BUFFER_SIZE     (8192) /* Gives room for about 23msec@48KHz */
-#define MAX_VBI_BUFFER_SIZE      (28672) /* 1144*18 rounded up to next page */
-#define MAX_TS_BUFFER_SIZE       (98304) /* 512*188 rounded up to next page */
-#define MAX_HDTV_BUFFER_SIZE   (2080768) /* 541*1920*2 rounded up to next page
-					    Max: (1920x1080i60) */
-
-#define OVERFLOW_BUFFER_SIZE    (8192)
-
-#define RING_SIZE_VIDEO     4
-#define RING_SIZE_AUDIO     8
-#define RING_SIZE_TS        8
-
-#define NUM_SCATTER_GATHER_ENTRIES  8
-
-#define MAX_DMA_LENGTH (((MAX_VIDEO_BUFFER_SIZE + MAX_VBI_BUFFER_SIZE) * \
-			RING_SIZE_VIDEO * 2) + \
-			(MAX_AUDIO_BUFFER_SIZE * RING_SIZE_AUDIO * 2) + \
-			(MAX_TS_BUFFER_SIZE * RING_SIZE_TS * 4) + \
-			(RING_SIZE_VIDEO * PAGE_SIZE * 2) + \
-			(RING_SIZE_AUDIO * PAGE_SIZE * 2) + \
-			(RING_SIZE_TS    * PAGE_SIZE * 4) + \
-			 8 * PAGE_SIZE + OVERFLOW_BUFFER_SIZE + PAGE_SIZE)
-
-#define EVENT_QUEUE_SIZE    16
-
-/* Gathers the current state of a single channel. */
-
-struct SBufferHeader {
-	struct BUFFER_HEADER   ngeneBuffer; /* Physical descriptor */
-	struct SBufferHeader  *Next;
-	void                  *Buffer1;
-	struct HW_SCATTER_GATHER_ELEMENT *scList1;
-	void                  *Buffer2;
-	struct HW_SCATTER_GATHER_ELEMENT *scList2;
-};
-
-/* Sizeof SBufferHeader aligned to next 64 Bit boundary (hw restriction) */
-#define SIZEOF_SBufferHeader ((sizeof(struct SBufferHeader) + 63) & ~63)
-
-enum HWSTATE {
-	HWSTATE_STOP,
-	HWSTATE_STARTUP,
-	HWSTATE_RUN,
-	HWSTATE_PAUSE,
-};
-
-enum KSSTATE {
-	KSSTATE_STOP,
-	KSSTATE_ACQUIRE,
-	KSSTATE_PAUSE,
-	KSSTATE_RUN,
-};
-
-struct SRingBufferDescriptor {
-	struct SBufferHeader *Head; /* Points to first buffer in ring buffer
-				       structure*/
-	u64   PAHead;         /* Physical address of first buffer */
-	u32   MemSize;        /* Memory size of allocated ring buffers
-				 (needed for freeing) */
-	u32   NumBuffers;     /* Number of buffers in the ring */
-	u32   Buffer1Length;  /* Allocated length of Buffer 1 */
-	u32   Buffer2Length;  /* Allocated length of Buffer 2 */
-	void *SCListMem;      /* Memory to hold scatter gather lists for this
-				 ring */
-	u64   PASCListMem;    /* Physical address  .. */
-	u32   SCListMemSize;  /* Size of this memory */
-};
-
-enum STREAMMODEFLAGS {
-	StreamMode_NONE   = 0, /* Stream not used */
-	StreamMode_ANALOG = 1, /* Analog: Stream 0,1 = Video, 2,3 = Audio */
-	StreamMode_TSIN   = 2, /* Transport stream input (all) */
-	StreamMode_HDTV   = 4, /* HDTV: Maximum 1920x1080p30,1920x1080i60
-				  (only stream 0) */
-	StreamMode_TSOUT  = 8, /* Transport stream output (only stream 3) */
-};
-
-
-enum BufferExchangeFlags {
-	BEF_EVEN_FIELD   = 0x00000001,
-	BEF_CONTINUATION = 0x00000002,
-	BEF_MORE_DATA    = 0x00000004,
-	BEF_OVERFLOW     = 0x00000008,
-	DF_SWAP32        = 0x00010000,
-};
-
-typedef void *(IBufferExchange)(void *, void *, u32, u32, u32);
-
-struct MICI_STREAMINFO {
-	IBufferExchange    *pExchange;
-	IBufferExchange    *pExchangeVBI;     /* Secondary (VBI, ancillary) */
-	u8  Stream;
-	u8  Flags;
-	u8  Mode;
-	u8  Reserved;
-	u16 nLinesVideo;
-	u16 nBytesPerLineVideo;
-	u16 nLinesVBI;
-	u16 nBytesPerLineVBI;
-	u32 CaptureLength;    /* Used for audio and transport stream */
-};
-
-/****************************************************************************/
-/* STRUCTS ******************************************************************/
-/****************************************************************************/
-
-/* sound hardware definition */
-#define MIXER_ADDR_TVTUNER      0
-#define MIXER_ADDR_LAST         0
-
-struct ngene_channel;
-
-/*struct sound chip*/
-
-struct mychip {
-	struct ngene_channel *chan;
-	struct snd_card *card;
-	struct pci_dev *pci;
-	struct snd_pcm_substream *substream;
-	struct snd_pcm *pcm;
-	unsigned long port;
-	int irq;
-	spinlock_t mixer_lock;
-	spinlock_t lock;
-	int mixer_volume[MIXER_ADDR_LAST + 1][2];
-	int capture_source[MIXER_ADDR_LAST + 1][2];
-};
-
-#ifdef NGENE_V4L
-struct ngene_overlay {
-	int                    tvnorm;
-	struct v4l2_rect       w;
-	enum v4l2_field        field;
-	struct v4l2_clip       *clips;
-	int                    nclips;
-	int                    setup_ok;
-};
-
-struct ngene_tvnorm {
-	int   v4l2_id;
-	char  *name;
-	u16   swidth, sheight; /* scaled standard width, height */
-	int   tuner_norm;
-	int   soundstd;
-};
-
-struct ngene_vopen {
-	struct ngene_channel      *ch;
-	enum v4l2_priority         prio;
-	int                        width;
-	int                        height;
-	int                        depth;
-	struct videobuf_queue      vbuf_q;
-	struct videobuf_queue      vbi;
-	int                        fourcc;
-	int                        picxcount;
-	int                        resources;
-	enum v4l2_buf_type         type;
-	const struct ngene_format *fmt;
-
-	const struct ngene_format *ovfmt;
-	struct ngene_overlay       ov;
-};
-#endif
-
-struct ngene_channel {
-	struct device         device;
-	struct i2c_adapter    i2c_adapter;
-
-	struct ngene         *dev;
-	int                   number;
-	int                   type;
-	int                   mode;
-	bool                  has_adapter;
-	bool                  has_demux;
-	int                   demod_type;
-	int (*gate_ctrl)(struct dvb_frontend *, int);
-
-	struct dvb_frontend  *fe;
-	struct dvb_frontend  *fe2;
-	struct dmxdev         dmxdev;
-	struct dvb_demux      demux;
-	struct dvb_net        dvbnet;
-	struct dmx_frontend   hw_frontend;
-	struct dmx_frontend   mem_frontend;
-	int                   users;
-	struct video_device  *v4l_dev;
-	struct dvb_device    *ci_dev;
-	struct tasklet_struct demux_tasklet;
-
-	struct SBufferHeader *nextBuffer;
-	enum KSSTATE          State;
-	enum HWSTATE          HWState;
-	u8                    Stream;
-	u8                    Flags;
-	u8                    Mode;
-	IBufferExchange      *pBufferExchange;
-	IBufferExchange      *pBufferExchange2;
-
-	spinlock_t            state_lock;
-	u16                   nLines;
-	u16                   nBytesPerLine;
-	u16                   nVBILines;
-	u16                   nBytesPerVBILine;
-	u16                   itumode;
-	u32                   Capture1Length;
-	u32                   Capture2Length;
-	struct SRingBufferDescriptor RingBuffer;
-	struct SRingBufferDescriptor TSRingBuffer;
-	struct SRingBufferDescriptor TSIdleBuffer;
-
-	u32                   DataFormatFlags;
-
-	int                   AudioDTOUpdated;
-	u32                   AudioDTOValue;
-
-	int (*set_tone)(struct dvb_frontend *, fe_sec_tone_mode_t);
-	u8 lnbh;
-
-	/* stuff from analog driver */
-
-	int minor;
-	struct mychip        *mychip;
-	struct snd_card      *soundcard;
-	u8                   *evenbuffer;
-	u8                    dma_on;
-	int                   soundstreamon;
-	int                   audiomute;
-	int                   soundbuffisallocated;
-	int                   sndbuffflag;
-	int                   tun_rdy;
-	int                   dec_rdy;
-	int                   tun_dec_rdy;
-	int                   lastbufferflag;
-
-	struct ngene_tvnorm  *tvnorms;
-	int                   tvnorm_num;
-	int                   tvnorm;
-
-#ifdef NGENE_V4L
-	int                   videousers;
-	struct v4l2_prio_state prio;
-	struct ngene_vopen    init;
-	int                   resources;
-	struct v4l2_framebuffer fbuf;
-	struct ngene_buffer  *screen;     /* overlay             */
-	struct list_head      capture;    /* video capture queue */
-	spinlock_t s_lock;
-	struct semaphore reslock;
-#endif
-
-	int running;
-};
-
-
-struct ngene_ci {
-	struct device         device;
-	struct i2c_adapter    i2c_adapter;
-
-	struct ngene         *dev;
-	struct dvb_ca_en50221 *en;
-};
-
-struct ngene;
-
-typedef void (rx_cb_t)(struct ngene *, u32, u8);
-typedef void (tx_cb_t)(struct ngene *, u32);
-
-struct ngene {
-	int                   nr;
-	struct pci_dev       *pci_dev;
-	unsigned char        *iomem;
-
-	/*struct i2c_adapter  i2c_adapter;*/
-
-	u32                   device_version;
-	u32                   fw_interface_version;
-	u32                   icounts;
-	bool                  msi_enabled;
-	bool                  cmd_timeout_workaround;
-
-	u8                   *CmdDoneByte;
-	int                   BootFirmware;
-	void                 *OverflowBuffer;
-	dma_addr_t            PAOverflowBuffer;
-	void                 *FWInterfaceBuffer;
-	dma_addr_t            PAFWInterfaceBuffer;
-	u8                   *ngenetohost;
-	u8                   *hosttongene;
-
-	struct EVENT_BUFFER   EventQueue[EVENT_QUEUE_SIZE];
-	int                   EventQueueOverflowCount;
-	int                   EventQueueOverflowFlag;
-	struct tasklet_struct event_tasklet;
-	struct EVENT_BUFFER  *EventBuffer;
-	int                   EventQueueWriteIndex;
-	int                   EventQueueReadIndex;
-
-	wait_queue_head_t     cmd_wq;
-	int                   cmd_done;
-	struct semaphore      cmd_mutex;
-	struct semaphore      stream_mutex;
-	struct semaphore      pll_mutex;
-	struct semaphore      i2c_switch_mutex;
-	int                   i2c_current_channel;
-	int                   i2c_current_bus;
-	spinlock_t            cmd_lock;
-
-	struct dvb_adapter    adapter[MAX_STREAM];
-	struct dvb_adapter    *first_adapter; /* "one_adapter" modprobe opt */
-	struct ngene_channel  channel[MAX_STREAM];
-
-	struct ngene_info    *card_info;
-
-	tx_cb_t              *TxEventNotify;
-	rx_cb_t              *RxEventNotify;
-	int                   tx_busy;
-	wait_queue_head_t     tx_wq;
-	wait_queue_head_t     rx_wq;
-#define UART_RBUF_LEN 4096
-	u8                    uart_rbuf[UART_RBUF_LEN];
-	int                   uart_rp, uart_wp;
-
-#define TS_FILLER  0x6f
-
-	u8                   *tsout_buf;
-#define TSOUT_BUF_SIZE (512*188*8)
-	struct dvb_ringbuffer tsout_rbuf;
-
-	u8                   *tsin_buf;
-#define TSIN_BUF_SIZE (512*188*8)
-	struct dvb_ringbuffer tsin_rbuf;
-
-	u8                   *ain_buf;
-#define AIN_BUF_SIZE (128*1024)
-	struct dvb_ringbuffer ain_rbuf;
-
-
-	u8                   *vin_buf;
-#define VIN_BUF_SIZE (4*1920*1080)
-	struct dvb_ringbuffer vin_rbuf;
-
-	unsigned long         exp_val;
-	int prev_cmd;
-
-	struct ngene_ci       ci;
-};
-
-struct ngene_info {
-	int   type;
-#define NGENE_APP        0
-#define NGENE_TERRATEC   1
-#define NGENE_SIDEWINDER 2
-#define NGENE_RACER      3
-#define NGENE_VIPER      4
-#define NGENE_PYTHON     5
-#define NGENE_VBOX_V1	 6
-#define NGENE_VBOX_V2	 7
-
-	int   fw_version;
-	bool  msi_supported;
-	char *name;
-
-	int   io_type[MAX_STREAM];
-#define NGENE_IO_NONE    0
-#define NGENE_IO_TV      1
-#define NGENE_IO_HDTV    2
-#define NGENE_IO_TSIN    4
-#define NGENE_IO_TSOUT   8
-#define NGENE_IO_AIN     16
-
-	void *fe_config[4];
-	void *tuner_config[4];
-
-	int (*demod_attach[4])(struct ngene_channel *);
-	int (*tuner_attach[4])(struct ngene_channel *);
-
-	u8    avf[4];
-	u8    msp[4];
-	u8    demoda[4];
-	u8    lnb[4];
-	int   i2c_access;
-	u8    ntsc;
-	u8    tsf[4];
-	u8    i2s[4];
-
-	int (*gate_ctrl)(struct dvb_frontend *, int);
-	int (*switch_ctrl)(struct ngene_channel *, int, int);
-};
-
-#ifdef NGENE_V4L
-struct ngene_format {
-	char *name;
-	int   fourcc;          /* video4linux 2      */
-	int   btformat;        /* BT848_COLOR_FMT_*  */
-	int   format;
-	int   btswap;          /* BT848_COLOR_CTL_*  */
-	int   depth;           /* bit/pixel          */
-	int   flags;
-	int   hshift, vshift;  /* for planar modes   */
-	int   palette;
-};
-
-#define RESOURCE_OVERLAY       1
-#define RESOURCE_VIDEO         2
-#define RESOURCE_VBI           4
-
-struct ngene_buffer {
-	/* common v4l buffer stuff -- must be first */
-	struct videobuf_buffer     vb;
-
-	/* ngene specific */
-	const struct ngene_format *fmt;
-	int                        tvnorm;
-	int                        btformat;
-	int                        btswap;
-};
-#endif
-
-
-/* Provided by ngene-core.c */
-int __devinit ngene_probe(struct pci_dev *pci_dev,
-			  const struct pci_device_id *id);
-void __devexit ngene_remove(struct pci_dev *pdev);
-void ngene_shutdown(struct pci_dev *pdev);
-int ngene_command(struct ngene *dev, struct ngene_command *com);
-int ngene_command_gpio_set(struct ngene *dev, u8 select, u8 level);
-void set_transfer(struct ngene_channel *chan, int state);
-void FillTSBuffer(void *Buffer, int Length, u32 Flags);
-
-/* Provided by ngene-i2c.c */
-int ngene_i2c_init(struct ngene *dev, int dev_nr);
-
-/* Provided by ngene-dvb.c */
-extern struct dvb_device ngene_dvbdev_ci;
-void *tsout_exchange(void *priv, void *buf, u32 len, u32 clock, u32 flags);
-void *tsin_exchange(void *priv, void *buf, u32 len, u32 clock, u32 flags);
-int ngene_start_feed(struct dvb_demux_feed *dvbdmxfeed);
-int ngene_stop_feed(struct dvb_demux_feed *dvbdmxfeed);
-int my_dvb_dmx_ts_card_init(struct dvb_demux *dvbdemux, char *id,
-			    int (*start_feed)(struct dvb_demux_feed *),
-			    int (*stop_feed)(struct dvb_demux_feed *),
-			    void *priv);
-int my_dvb_dmxdev_ts_card_init(struct dmxdev *dmxdev,
-			       struct dvb_demux *dvbdemux,
-			       struct dmx_frontend *hw_frontend,
-			       struct dmx_frontend *mem_frontend,
-			       struct dvb_adapter *dvb_adapter);
-
-#endif
-
-/*  LocalWords:  Endif
- */
diff --git a/drivers/media/dvb/pluto2/Kconfig b/drivers/media/dvb/pluto2/Kconfig
deleted file mode 100644
index 7d8e6e8..0000000
--- a/drivers/media/dvb/pluto2/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-config DVB_PLUTO2
-	tristate "Pluto2 cards"
-	depends on DVB_CORE && PCI && I2C
-	select I2C_ALGOBIT
-	select DVB_TDA1004X
-	help
-	  Support for PCI cards based on the Pluto2 FPGA like the Satelco
-	  Easywatch Mobile Terrestrial DVB-T Receiver.
-
-	  Since these cards have no MPEG decoder onboard, they transmit
-	  only compressed MPEG data over the PCI bus, so you need
-	  an external software decoder to watch TV on your computer.
-
-	  Say Y or M if you own such a device and want to use it.
-
diff --git a/drivers/media/dvb/pluto2/Makefile b/drivers/media/dvb/pluto2/Makefile
deleted file mode 100644
index 7008223..0000000
--- a/drivers/media/dvb/pluto2/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-$(CONFIG_DVB_PLUTO2) += pluto2.o
-
-ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c
deleted file mode 100644
index f148b19..0000000
--- a/drivers/media/dvb/pluto2/pluto2.c
+++ /dev/null
@@ -1,815 +0,0 @@
-/*
- * pluto2.c - Satelco Easywatch Mobile Terrestrial Receiver [DVB-T]
- *
- * Copyright (C) 2005 Andreas Oberritter <obi@linuxtv.org>
- *
- * based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/
- * 	by Dany Salman <salmandany@yahoo.fr>
- *	Copyright (c) 2004 TDF
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/slab.h>
-
-#include "demux.h"
-#include "dmxdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-#include "dvbdev.h"
-#include "tda1004x.h"
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-#define DRIVER_NAME		"pluto2"
-
-#define REG_PIDn(n)		((n) << 2)	/* PID n pattern registers */
-#define REG_PCAR		0x0020		/* PC address register */
-#define REG_TSCR		0x0024		/* TS ctrl & status */
-#define REG_MISC		0x0028		/* miscellaneous */
-#define REG_MMAC		0x002c		/* MSB MAC address */
-#define REG_IMAC		0x0030		/* ISB MAC address */
-#define REG_LMAC		0x0034		/* LSB MAC address */
-#define REG_SPID		0x0038		/* SPI data */
-#define REG_SLCS		0x003c		/* serial links ctrl/status */
-
-#define PID0_NOFIL		(0x0001 << 16)
-#define PIDn_ENP		(0x0001 << 15)
-#define PID0_END		(0x0001 << 14)
-#define PID0_AFIL		(0x0001 << 13)
-#define PIDn_PID		(0x1fff <<  0)
-
-#define TSCR_NBPACKETS		(0x00ff << 24)
-#define TSCR_DEM		(0x0001 << 17)
-#define TSCR_DE			(0x0001 << 16)
-#define TSCR_RSTN		(0x0001 << 15)
-#define TSCR_MSKO		(0x0001 << 14)
-#define TSCR_MSKA		(0x0001 << 13)
-#define TSCR_MSKL		(0x0001 << 12)
-#define TSCR_OVR		(0x0001 << 11)
-#define TSCR_AFUL		(0x0001 << 10)
-#define TSCR_LOCK		(0x0001 <<  9)
-#define TSCR_IACK		(0x0001 <<  8)
-#define TSCR_ADEF		(0x007f <<  0)
-
-#define MISC_DVR		(0x0fff <<  4)
-#define MISC_ALED		(0x0001 <<  3)
-#define MISC_FRST		(0x0001 <<  2)
-#define MISC_LED1		(0x0001 <<  1)
-#define MISC_LED0		(0x0001 <<  0)
-
-#define SPID_SPIDR		(0x00ff <<  0)
-
-#define SLCS_SCL		(0x0001 <<  7)
-#define SLCS_SDA		(0x0001 <<  6)
-#define SLCS_CSN		(0x0001 <<  2)
-#define SLCS_OVR		(0x0001 <<  1)
-#define SLCS_SWC		(0x0001 <<  0)
-
-#define TS_DMA_PACKETS		(8)
-#define TS_DMA_BYTES		(188 * TS_DMA_PACKETS)
-
-#define I2C_ADDR_TDA10046	0x10
-#define I2C_ADDR_TUA6034	0xc2
-#define NHWFILTERS		8
-
-struct pluto {
-	/* pci */
-	struct pci_dev *pdev;
-	u8 __iomem *io_mem;
-
-	/* dvb */
-	struct dmx_frontend hw_frontend;
-	struct dmx_frontend mem_frontend;
-	struct dmxdev dmxdev;
-	struct dvb_adapter dvb_adapter;
-	struct dvb_demux demux;
-	struct dvb_frontend *fe;
-	struct dvb_net dvbnet;
-	unsigned int full_ts_users;
-	unsigned int users;
-
-	/* i2c */
-	struct i2c_algo_bit_data i2c_bit;
-	struct i2c_adapter i2c_adap;
-	unsigned int i2cbug;
-
-	/* irq */
-	unsigned int overflow;
-	unsigned int dead;
-
-	/* dma */
-	dma_addr_t dma_addr;
-	u8 dma_buf[TS_DMA_BYTES];
-	u8 dummy[4096];
-};
-
-static inline struct pluto *feed_to_pluto(struct dvb_demux_feed *feed)
-{
-	return container_of(feed->demux, struct pluto, demux);
-}
-
-static inline struct pluto *frontend_to_pluto(struct dvb_frontend *fe)
-{
-	return container_of(fe->dvb, struct pluto, dvb_adapter);
-}
-
-static inline u32 pluto_readreg(struct pluto *pluto, u32 reg)
-{
-	return readl(&pluto->io_mem[reg]);
-}
-
-static inline void pluto_writereg(struct pluto *pluto, u32 reg, u32 val)
-{
-	writel(val, &pluto->io_mem[reg]);
-}
-
-static inline void pluto_rw(struct pluto *pluto, u32 reg, u32 mask, u32 bits)
-{
-	u32 val = readl(&pluto->io_mem[reg]);
-	val &= ~mask;
-	val |= bits;
-	writel(val, &pluto->io_mem[reg]);
-}
-
-static void pluto_write_tscr(struct pluto *pluto, u32 val)
-{
-	/* set the number of packets */
-	val &= ~TSCR_ADEF;
-	val |= TS_DMA_PACKETS / 2;
-
-	pluto_writereg(pluto, REG_TSCR, val);
-}
-
-static void pluto_setsda(void *data, int state)
-{
-	struct pluto *pluto = data;
-
-	if (state)
-		pluto_rw(pluto, REG_SLCS, SLCS_SDA, SLCS_SDA);
-	else
-		pluto_rw(pluto, REG_SLCS, SLCS_SDA, 0);
-}
-
-static void pluto_setscl(void *data, int state)
-{
-	struct pluto *pluto = data;
-
-	if (state)
-		pluto_rw(pluto, REG_SLCS, SLCS_SCL, SLCS_SCL);
-	else
-		pluto_rw(pluto, REG_SLCS, SLCS_SCL, 0);
-
-	/* try to detect i2c_inb() to workaround hardware bug:
-	 * reset SDA to high after SCL has been set to low */
-	if ((state) && (pluto->i2cbug == 0)) {
-		pluto->i2cbug = 1;
-	} else {
-		if ((!state) && (pluto->i2cbug == 1))
-			pluto_setsda(pluto, 1);
-		pluto->i2cbug = 0;
-	}
-}
-
-static int pluto_getsda(void *data)
-{
-	struct pluto *pluto = data;
-
-	return pluto_readreg(pluto, REG_SLCS) & SLCS_SDA;
-}
-
-static int pluto_getscl(void *data)
-{
-	struct pluto *pluto = data;
-
-	return pluto_readreg(pluto, REG_SLCS) & SLCS_SCL;
-}
-
-static void pluto_reset_frontend(struct pluto *pluto, int reenable)
-{
-	u32 val = pluto_readreg(pluto, REG_MISC);
-
-	if (val & MISC_FRST) {
-		val &= ~MISC_FRST;
-		pluto_writereg(pluto, REG_MISC, val);
-	}
-	if (reenable) {
-		val |= MISC_FRST;
-		pluto_writereg(pluto, REG_MISC, val);
-	}
-}
-
-static void pluto_reset_ts(struct pluto *pluto, int reenable)
-{
-	u32 val = pluto_readreg(pluto, REG_TSCR);
-
-	if (val & TSCR_RSTN) {
-		val &= ~TSCR_RSTN;
-		pluto_write_tscr(pluto, val);
-	}
-	if (reenable) {
-		val |= TSCR_RSTN;
-		pluto_write_tscr(pluto, val);
-	}
-}
-
-static void pluto_set_dma_addr(struct pluto *pluto)
-{
-	pluto_writereg(pluto, REG_PCAR, pluto->dma_addr);
-}
-
-static int __devinit pluto_dma_map(struct pluto *pluto)
-{
-	pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf,
-			TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
-
-	return pci_dma_mapping_error(pluto->pdev, pluto->dma_addr);
-}
-
-static void pluto_dma_unmap(struct pluto *pluto)
-{
-	pci_unmap_single(pluto->pdev, pluto->dma_addr,
-			TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
-}
-
-static int pluto_start_feed(struct dvb_demux_feed *f)
-{
-	struct pluto *pluto = feed_to_pluto(f);
-
-	/* enable PID filtering */
-	if (pluto->users++ == 0)
-		pluto_rw(pluto, REG_PIDn(0), PID0_AFIL | PID0_NOFIL, 0);
-
-	if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
-		pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, PIDn_ENP | f->pid);
-	else if (pluto->full_ts_users++ == 0)
-		pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, PID0_NOFIL);
-
-	return 0;
-}
-
-static int pluto_stop_feed(struct dvb_demux_feed *f)
-{
-	struct pluto *pluto = feed_to_pluto(f);
-
-	/* disable PID filtering */
-	if (--pluto->users == 0)
-		pluto_rw(pluto, REG_PIDn(0), PID0_AFIL, PID0_AFIL);
-
-	if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
-		pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, 0x1fff);
-	else if (--pluto->full_ts_users == 0)
-		pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, 0);
-
-	return 0;
-}
-
-static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets)
-{
-	/* synchronize the DMA transfer with the CPU
-	 * first so that we see updated contents. */
-	pci_dma_sync_single_for_cpu(pluto->pdev, pluto->dma_addr,
-			TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
-
-	/* Workaround for broken hardware:
-	 * [1] On startup NBPACKETS seems to contain an uninitialized value,
-	 *     but no packets have been transferred.
-	 * [2] Sometimes (actually very often) NBPACKETS stays at zero
-	 *     although one packet has been transferred.
-	 * [3] Sometimes (actually rarely), the card gets into an erroneous
-	 *     mode where it continuously generates interrupts, claiming it
-	 *     has received nbpackets>TS_DMA_PACKETS packets, but no packet
-	 *     has been transferred. Only a reset seems to solve this
-	 */
-	if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) {
-		unsigned int i = 0;
-		while (pluto->dma_buf[i] == 0x47)
-			i += 188;
-		nbpackets = i / 188;
-		if (i == 0) {
-			pluto_reset_ts(pluto, 1);
-			dev_printk(KERN_DEBUG, &pluto->pdev->dev, "resetting TS because of invalid packet counter\n");
-		}
-	}
-
-	dvb_dmx_swfilter_packets(&pluto->demux, pluto->dma_buf, nbpackets);
-
-	/* clear the dma buffer. this is needed to be able to identify
-	 * new valid ts packets above */
-	memset(pluto->dma_buf, 0, nbpackets * 188);
-
-	/* reset the dma address */
-	pluto_set_dma_addr(pluto);
-
-	/* sync the buffer and give it back to the card */
-	pci_dma_sync_single_for_device(pluto->pdev, pluto->dma_addr,
-			TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
-}
-
-static irqreturn_t pluto_irq(int irq, void *dev_id)
-{
-	struct pluto *pluto = dev_id;
-	u32 tscr;
-
-	/* check whether an interrupt occurred on this device */
-	tscr = pluto_readreg(pluto, REG_TSCR);
-	if (!(tscr & (TSCR_DE | TSCR_OVR)))
-		return IRQ_NONE;
-
-	if (tscr == 0xffffffff) {
-		if (pluto->dead == 0)
-			dev_err(&pluto->pdev->dev, "card has hung or been ejected.\n");
-		/* It's dead Jim */
-		pluto->dead = 1;
-		return IRQ_HANDLED;
-	}
-
-	/* dma end interrupt */
-	if (tscr & TSCR_DE) {
-		pluto_dma_end(pluto, (tscr & TSCR_NBPACKETS) >> 24);
-		/* overflow interrupt */
-		if (tscr & TSCR_OVR)
-			pluto->overflow++;
-		if (pluto->overflow) {
-			dev_err(&pluto->pdev->dev, "overflow irq (%d)\n",
-					pluto->overflow);
-			pluto_reset_ts(pluto, 1);
-			pluto->overflow = 0;
-		}
-	} else if (tscr & TSCR_OVR) {
-		pluto->overflow++;
-	}
-
-	/* ACK the interrupt */
-	pluto_write_tscr(pluto, tscr | TSCR_IACK);
-
-	return IRQ_HANDLED;
-}
-
-static void __devinit pluto_enable_irqs(struct pluto *pluto)
-{
-	u32 val = pluto_readreg(pluto, REG_TSCR);
-
-	/* disable AFUL and LOCK interrupts */
-	val |= (TSCR_MSKA | TSCR_MSKL);
-	/* enable DMA and OVERFLOW interrupts */
-	val &= ~(TSCR_DEM | TSCR_MSKO);
-	/* clear pending interrupts */
-	val |= TSCR_IACK;
-
-	pluto_write_tscr(pluto, val);
-}
-
-static void pluto_disable_irqs(struct pluto *pluto)
-{
-	u32 val = pluto_readreg(pluto, REG_TSCR);
-
-	/* disable all interrupts */
-	val |= (TSCR_DEM | TSCR_MSKO | TSCR_MSKA | TSCR_MSKL);
-	/* clear pending interrupts */
-	val |= TSCR_IACK;
-
-	pluto_write_tscr(pluto, val);
-}
-
-static int __devinit pluto_hw_init(struct pluto *pluto)
-{
-	pluto_reset_frontend(pluto, 1);
-
-	/* set automatic LED control by FPGA */
-	pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED);
-
-	/* set data endianess */
-#ifdef __LITTLE_ENDIAN
-	pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END);
-#else
-	pluto_rw(pluto, REG_PIDn(0), PID0_END, 0);
-#endif
-	/* map DMA and set address */
-	pluto_dma_map(pluto);
-	pluto_set_dma_addr(pluto);
-
-	/* enable interrupts */
-	pluto_enable_irqs(pluto);
-
-	/* reset TS logic */
-	pluto_reset_ts(pluto, 1);
-
-	return 0;
-}
-
-static void pluto_hw_exit(struct pluto *pluto)
-{
-	/* disable interrupts */
-	pluto_disable_irqs(pluto);
-
-	pluto_reset_ts(pluto, 0);
-
-	/* LED: disable automatic control, enable yellow, disable green */
-	pluto_rw(pluto, REG_MISC, MISC_ALED | MISC_LED1 | MISC_LED0, MISC_LED1);
-
-	/* unmap DMA */
-	pluto_dma_unmap(pluto);
-
-	pluto_reset_frontend(pluto, 0);
-}
-
-static inline u32 divide(u32 numerator, u32 denominator)
-{
-	if (denominator == 0)
-		return ~0;
-
-	return DIV_ROUND_CLOSEST(numerator, denominator);
-}
-
-/* LG Innotek TDTE-E001P (Infineon TUA6034) */
-static int lg_tdtpe001p_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct pluto *pluto = frontend_to_pluto(fe);
-	struct i2c_msg msg;
-	int ret;
-	u8 buf[4];
-	u32 div;
-
-	// Fref = 166.667 Hz
-	// Fref * 3 = 500.000 Hz
-	// IF = 36166667
-	// IF / Fref = 217
-	//div = divide(p->frequency + 36166667, 166667);
-	div = divide(p->frequency * 3, 500000) + 217;
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = (div >> 0) & 0xff;
-
-	if (p->frequency < 611000000)
-		buf[2] = 0xb4;
-	else if (p->frequency < 811000000)
-		buf[2] = 0xbc;
-	else
-		buf[2] = 0xf4;
-
-	// VHF: 174-230 MHz
-	// center: 350 MHz
-	// UHF: 470-862 MHz
-	if (p->frequency < 350000000)
-		buf[3] = 0x02;
-	else
-		buf[3] = 0x04;
-
-	if (p->bandwidth_hz == 8000000)
-		buf[3] |= 0x08;
-
-	msg.addr = I2C_ADDR_TUA6034 >> 1;
-	msg.flags = 0;
-	msg.buf = buf;
-	msg.len = sizeof(buf);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	ret = i2c_transfer(&pluto->i2c_adap, &msg, 1);
-	if (ret < 0)
-		return ret;
-	else if (ret == 0)
-		return -EREMOTEIO;
-
-	return 0;
-}
-
-static int pluto2_request_firmware(struct dvb_frontend *fe,
-				   const struct firmware **fw, char *name)
-{
-	struct pluto *pluto = frontend_to_pluto(fe);
-
-	return request_firmware(fw, name, &pluto->pdev->dev);
-}
-
-static struct tda1004x_config pluto2_fe_config __devinitdata = {
-	.demod_address = I2C_ADDR_TDA10046 >> 1,
-	.invert = 1,
-	.invert_oclk = 0,
-	.xtal_freq = TDA10046_XTAL_16M,
-	.agc_config = TDA10046_AGC_DEFAULT,
-	.if_freq = TDA10046_FREQ_3617,
-	.request_firmware = pluto2_request_firmware,
-};
-
-static int __devinit frontend_init(struct pluto *pluto)
-{
-	int ret;
-
-	pluto->fe = tda10046_attach(&pluto2_fe_config, &pluto->i2c_adap);
-	if (!pluto->fe) {
-		dev_err(&pluto->pdev->dev, "could not attach frontend\n");
-		return -ENODEV;
-	}
-	pluto->fe->ops.tuner_ops.set_params = lg_tdtpe001p_tuner_set_params;
-
-	ret = dvb_register_frontend(&pluto->dvb_adapter, pluto->fe);
-	if (ret < 0) {
-		if (pluto->fe->ops.release)
-			pluto->fe->ops.release(pluto->fe);
-		return ret;
-	}
-
-	return 0;
-}
-
-static void __devinit pluto_read_rev(struct pluto *pluto)
-{
-	u32 val = pluto_readreg(pluto, REG_MISC) & MISC_DVR;
-	dev_info(&pluto->pdev->dev, "board revision %d.%d\n",
-			(val >> 12) & 0x0f, (val >> 4) & 0xff);
-}
-
-static void __devinit pluto_read_mac(struct pluto *pluto, u8 *mac)
-{
-	u32 val = pluto_readreg(pluto, REG_MMAC);
-	mac[0] = (val >> 8) & 0xff;
-	mac[1] = (val >> 0) & 0xff;
-
-	val = pluto_readreg(pluto, REG_IMAC);
-	mac[2] = (val >> 8) & 0xff;
-	mac[3] = (val >> 0) & 0xff;
-
-	val = pluto_readreg(pluto, REG_LMAC);
-	mac[4] = (val >> 8) & 0xff;
-	mac[5] = (val >> 0) & 0xff;
-
-	dev_info(&pluto->pdev->dev, "MAC %pM\n", mac);
-}
-
-static int __devinit pluto_read_serial(struct pluto *pluto)
-{
-	struct pci_dev *pdev = pluto->pdev;
-	unsigned int i, j;
-	u8 __iomem *cis;
-
-	cis = pci_iomap(pdev, 1, 0);
-	if (!cis)
-		return -EIO;
-
-	dev_info(&pdev->dev, "S/N ");
-
-	for (i = 0xe0; i < 0x100; i += 4) {
-		u32 val = readl(&cis[i]);
-		for (j = 0; j < 32; j += 8) {
-			if ((val & 0xff) == 0xff)
-				goto out;
-			printk("%c", val & 0xff);
-			val >>= 8;
-		}
-	}
-out:
-	printk("\n");
-	pci_iounmap(pdev, cis);
-
-	return 0;
-}
-
-static int __devinit pluto2_probe(struct pci_dev *pdev,
-				  const struct pci_device_id *ent)
-{
-	struct pluto *pluto;
-	struct dvb_adapter *dvb_adapter;
-	struct dvb_demux *dvbdemux;
-	struct dmx_demux *dmx;
-	int ret = -ENOMEM;
-
-	pluto = kzalloc(sizeof(struct pluto), GFP_KERNEL);
-	if (!pluto)
-		goto out;
-
-	pluto->pdev = pdev;
-
-	ret = pci_enable_device(pdev);
-	if (ret < 0)
-		goto err_kfree;
-
-	/* enable interrupts */
-	pci_write_config_dword(pdev, 0x6c, 0x8000);
-
-	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-	if (ret < 0)
-		goto err_pci_disable_device;
-
-	pci_set_master(pdev);
-
-	ret = pci_request_regions(pdev, DRIVER_NAME);
-	if (ret < 0)
-		goto err_pci_disable_device;
-
-	pluto->io_mem = pci_iomap(pdev, 0, 0x40);
-	if (!pluto->io_mem) {
-		ret = -EIO;
-		goto err_pci_release_regions;
-	}
-
-	pci_set_drvdata(pdev, pluto);
-
-	ret = request_irq(pdev->irq, pluto_irq, IRQF_SHARED, DRIVER_NAME, pluto);
-	if (ret < 0)
-		goto err_pci_iounmap;
-
-	ret = pluto_hw_init(pluto);
-	if (ret < 0)
-		goto err_free_irq;
-
-	/* i2c */
-	i2c_set_adapdata(&pluto->i2c_adap, pluto);
-	strcpy(pluto->i2c_adap.name, DRIVER_NAME);
-	pluto->i2c_adap.owner = THIS_MODULE;
-	pluto->i2c_adap.dev.parent = &pdev->dev;
-	pluto->i2c_adap.algo_data = &pluto->i2c_bit;
-	pluto->i2c_bit.data = pluto;
-	pluto->i2c_bit.setsda = pluto_setsda;
-	pluto->i2c_bit.setscl = pluto_setscl;
-	pluto->i2c_bit.getsda = pluto_getsda;
-	pluto->i2c_bit.getscl = pluto_getscl;
-	pluto->i2c_bit.udelay = 10;
-	pluto->i2c_bit.timeout = 10;
-
-	/* Raise SCL and SDA */
-	pluto_setsda(pluto, 1);
-	pluto_setscl(pluto, 1);
-
-	ret = i2c_bit_add_bus(&pluto->i2c_adap);
-	if (ret < 0)
-		goto err_pluto_hw_exit;
-
-	/* dvb */
-	ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME,
-				   THIS_MODULE, &pdev->dev, adapter_nr);
-	if (ret < 0)
-		goto err_i2c_del_adapter;
-
-	dvb_adapter = &pluto->dvb_adapter;
-
-	pluto_read_rev(pluto);
-	pluto_read_serial(pluto);
-	pluto_read_mac(pluto, dvb_adapter->proposed_mac);
-
-	dvbdemux = &pluto->demux;
-	dvbdemux->filternum = 256;
-	dvbdemux->feednum = 256;
-	dvbdemux->start_feed = pluto_start_feed;
-	dvbdemux->stop_feed = pluto_stop_feed;
-	dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
-			DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
-	ret = dvb_dmx_init(dvbdemux);
-	if (ret < 0)
-		goto err_dvb_unregister_adapter;
-
-	dmx = &dvbdemux->dmx;
-
-	pluto->hw_frontend.source = DMX_FRONTEND_0;
-	pluto->mem_frontend.source = DMX_MEMORY_FE;
-	pluto->dmxdev.filternum = NHWFILTERS;
-	pluto->dmxdev.demux = dmx;
-
-	ret = dvb_dmxdev_init(&pluto->dmxdev, dvb_adapter);
-	if (ret < 0)
-		goto err_dvb_dmx_release;
-
-	ret = dmx->add_frontend(dmx, &pluto->hw_frontend);
-	if (ret < 0)
-		goto err_dvb_dmxdev_release;
-
-	ret = dmx->add_frontend(dmx, &pluto->mem_frontend);
-	if (ret < 0)
-		goto err_remove_hw_frontend;
-
-	ret = dmx->connect_frontend(dmx, &pluto->hw_frontend);
-	if (ret < 0)
-		goto err_remove_mem_frontend;
-
-	ret = frontend_init(pluto);
-	if (ret < 0)
-		goto err_disconnect_frontend;
-
-	dvb_net_init(dvb_adapter, &pluto->dvbnet, dmx);
-out:
-	return ret;
-
-err_disconnect_frontend:
-	dmx->disconnect_frontend(dmx);
-err_remove_mem_frontend:
-	dmx->remove_frontend(dmx, &pluto->mem_frontend);
-err_remove_hw_frontend:
-	dmx->remove_frontend(dmx, &pluto->hw_frontend);
-err_dvb_dmxdev_release:
-	dvb_dmxdev_release(&pluto->dmxdev);
-err_dvb_dmx_release:
-	dvb_dmx_release(dvbdemux);
-err_dvb_unregister_adapter:
-	dvb_unregister_adapter(dvb_adapter);
-err_i2c_del_adapter:
-	i2c_del_adapter(&pluto->i2c_adap);
-err_pluto_hw_exit:
-	pluto_hw_exit(pluto);
-err_free_irq:
-	free_irq(pdev->irq, pluto);
-err_pci_iounmap:
-	pci_iounmap(pdev, pluto->io_mem);
-err_pci_release_regions:
-	pci_release_regions(pdev);
-err_pci_disable_device:
-	pci_disable_device(pdev);
-err_kfree:
-	pci_set_drvdata(pdev, NULL);
-	kfree(pluto);
-	goto out;
-}
-
-static void __devexit pluto2_remove(struct pci_dev *pdev)
-{
-	struct pluto *pluto = pci_get_drvdata(pdev);
-	struct dvb_adapter *dvb_adapter = &pluto->dvb_adapter;
-	struct dvb_demux *dvbdemux = &pluto->demux;
-	struct dmx_demux *dmx = &dvbdemux->dmx;
-
-	dmx->close(dmx);
-	dvb_net_release(&pluto->dvbnet);
-	if (pluto->fe)
-		dvb_unregister_frontend(pluto->fe);
-
-	dmx->disconnect_frontend(dmx);
-	dmx->remove_frontend(dmx, &pluto->mem_frontend);
-	dmx->remove_frontend(dmx, &pluto->hw_frontend);
-	dvb_dmxdev_release(&pluto->dmxdev);
-	dvb_dmx_release(dvbdemux);
-	dvb_unregister_adapter(dvb_adapter);
-	i2c_del_adapter(&pluto->i2c_adap);
-	pluto_hw_exit(pluto);
-	free_irq(pdev->irq, pluto);
-	pci_iounmap(pdev, pluto->io_mem);
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-	pci_set_drvdata(pdev, NULL);
-	kfree(pluto);
-}
-
-#ifndef PCI_VENDOR_ID_SCM
-#define PCI_VENDOR_ID_SCM	0x0432
-#endif
-#ifndef PCI_DEVICE_ID_PLUTO2
-#define PCI_DEVICE_ID_PLUTO2	0x0001
-#endif
-
-static struct pci_device_id pluto2_id_table[] __devinitdata = {
-	{
-		.vendor = PCI_VENDOR_ID_SCM,
-		.device = PCI_DEVICE_ID_PLUTO2,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-	}, {
-		/* empty */
-	},
-};
-
-MODULE_DEVICE_TABLE(pci, pluto2_id_table);
-
-static struct pci_driver pluto2_driver = {
-	.name = DRIVER_NAME,
-	.id_table = pluto2_id_table,
-	.probe = pluto2_probe,
-	.remove = __devexit_p(pluto2_remove),
-};
-
-static int __init pluto2_init(void)
-{
-	return pci_register_driver(&pluto2_driver);
-}
-
-static void __exit pluto2_exit(void)
-{
-	pci_unregister_driver(&pluto2_driver);
-}
-
-module_init(pluto2_init);
-module_exit(pluto2_exit);
-
-MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
-MODULE_DESCRIPTION("Pluto2 driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/pt1/Kconfig b/drivers/media/dvb/pt1/Kconfig
deleted file mode 100644
index 24501d5..0000000
--- a/drivers/media/dvb/pt1/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-config DVB_PT1
-	tristate "PT1 cards"
-	depends on DVB_CORE && PCI && I2C
-	help
-	  Support for Earthsoft PT1 PCI cards.
-
-	  Since these cards have no MPEG decoder onboard, they transmit
-	  only compressed MPEG data over the PCI bus, so you need
-	  an external software decoder to watch TV on your computer.
-
-	  Say Y or M if you own such a device and want to use it.
-
diff --git a/drivers/media/dvb/pt1/Makefile b/drivers/media/dvb/pt1/Makefile
deleted file mode 100644
index d80d8e8..0000000
--- a/drivers/media/dvb/pt1/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-earth-pt1-objs := pt1.o va1j5jf8007s.o va1j5jf8007t.o
-
-obj-$(CONFIG_DVB_PT1) += earth-pt1.o
-
-ccflags-y += -Idrivers/media/dvb/dvb-core -Idrivers/media/dvb/frontends
diff --git a/drivers/media/dvb/pt1/pt1.c b/drivers/media/dvb/pt1/pt1.c
deleted file mode 100644
index 15b35c4..0000000
--- a/drivers/media/dvb/pt1/pt1.c
+++ /dev/null
@@ -1,1246 +0,0 @@
-/*
- * driver for Earthsoft PT1/PT2
- *
- * Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info>
- *
- * based on pt1dvr - http://pt1dvr.sourceforge.jp/
- * 	by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/pci.h>
-#include <linux/kthread.h>
-#include <linux/freezer.h>
-#include <linux/ratelimit.h>
-
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dmxdev.h"
-#include "dvb_net.h"
-#include "dvb_frontend.h"
-
-#include "va1j5jf8007t.h"
-#include "va1j5jf8007s.h"
-
-#define DRIVER_NAME "earth-pt1"
-
-#define PT1_PAGE_SHIFT 12
-#define PT1_PAGE_SIZE (1 << PT1_PAGE_SHIFT)
-#define PT1_NR_UPACKETS 1024
-#define PT1_NR_BUFS 511
-
-struct pt1_buffer_page {
-	__le32 upackets[PT1_NR_UPACKETS];
-};
-
-struct pt1_table_page {
-	__le32 next_pfn;
-	__le32 buf_pfns[PT1_NR_BUFS];
-};
-
-struct pt1_buffer {
-	struct pt1_buffer_page *page;
-	dma_addr_t addr;
-};
-
-struct pt1_table {
-	struct pt1_table_page *page;
-	dma_addr_t addr;
-	struct pt1_buffer bufs[PT1_NR_BUFS];
-};
-
-#define PT1_NR_ADAPS 4
-
-struct pt1_adapter;
-
-struct pt1 {
-	struct pci_dev *pdev;
-	void __iomem *regs;
-	struct i2c_adapter i2c_adap;
-	int i2c_running;
-	struct pt1_adapter *adaps[PT1_NR_ADAPS];
-	struct pt1_table *tables;
-	struct task_struct *kthread;
-	int table_index;
-	int buf_index;
-
-	struct mutex lock;
-	int power;
-	int reset;
-};
-
-struct pt1_adapter {
-	struct pt1 *pt1;
-	int index;
-
-	u8 *buf;
-	int upacket_count;
-	int packet_count;
-	int st_count;
-
-	struct dvb_adapter adap;
-	struct dvb_demux demux;
-	int users;
-	struct dmxdev dmxdev;
-	struct dvb_frontend *fe;
-	int (*orig_set_voltage)(struct dvb_frontend *fe,
-				fe_sec_voltage_t voltage);
-	int (*orig_sleep)(struct dvb_frontend *fe);
-	int (*orig_init)(struct dvb_frontend *fe);
-
-	fe_sec_voltage_t voltage;
-	int sleep;
-};
-
-#define pt1_printk(level, pt1, format, arg...)	\
-	dev_printk(level, &(pt1)->pdev->dev, format, ##arg)
-
-static void pt1_write_reg(struct pt1 *pt1, int reg, u32 data)
-{
-	writel(data, pt1->regs + reg * 4);
-}
-
-static u32 pt1_read_reg(struct pt1 *pt1, int reg)
-{
-	return readl(pt1->regs + reg * 4);
-}
-
-static int pt1_nr_tables = 8;
-module_param_named(nr_tables, pt1_nr_tables, int, 0);
-
-static void pt1_increment_table_count(struct pt1 *pt1)
-{
-	pt1_write_reg(pt1, 0, 0x00000020);
-}
-
-static void pt1_init_table_count(struct pt1 *pt1)
-{
-	pt1_write_reg(pt1, 0, 0x00000010);
-}
-
-static void pt1_register_tables(struct pt1 *pt1, u32 first_pfn)
-{
-	pt1_write_reg(pt1, 5, first_pfn);
-	pt1_write_reg(pt1, 0, 0x0c000040);
-}
-
-static void pt1_unregister_tables(struct pt1 *pt1)
-{
-	pt1_write_reg(pt1, 0, 0x08080000);
-}
-
-static int pt1_sync(struct pt1 *pt1)
-{
-	int i;
-	for (i = 0; i < 57; i++) {
-		if (pt1_read_reg(pt1, 0) & 0x20000000)
-			return 0;
-		pt1_write_reg(pt1, 0, 0x00000008);
-	}
-	pt1_printk(KERN_ERR, pt1, "could not sync\n");
-	return -EIO;
-}
-
-static u64 pt1_identify(struct pt1 *pt1)
-{
-	int i;
-	u64 id;
-	id = 0;
-	for (i = 0; i < 57; i++) {
-		id |= (u64)(pt1_read_reg(pt1, 0) >> 30 & 1) << i;
-		pt1_write_reg(pt1, 0, 0x00000008);
-	}
-	return id;
-}
-
-static int pt1_unlock(struct pt1 *pt1)
-{
-	int i;
-	pt1_write_reg(pt1, 0, 0x00000008);
-	for (i = 0; i < 3; i++) {
-		if (pt1_read_reg(pt1, 0) & 0x80000000)
-			return 0;
-		schedule_timeout_uninterruptible((HZ + 999) / 1000);
-	}
-	pt1_printk(KERN_ERR, pt1, "could not unlock\n");
-	return -EIO;
-}
-
-static int pt1_reset_pci(struct pt1 *pt1)
-{
-	int i;
-	pt1_write_reg(pt1, 0, 0x01010000);
-	pt1_write_reg(pt1, 0, 0x01000000);
-	for (i = 0; i < 10; i++) {
-		if (pt1_read_reg(pt1, 0) & 0x00000001)
-			return 0;
-		schedule_timeout_uninterruptible((HZ + 999) / 1000);
-	}
-	pt1_printk(KERN_ERR, pt1, "could not reset PCI\n");
-	return -EIO;
-}
-
-static int pt1_reset_ram(struct pt1 *pt1)
-{
-	int i;
-	pt1_write_reg(pt1, 0, 0x02020000);
-	pt1_write_reg(pt1, 0, 0x02000000);
-	for (i = 0; i < 10; i++) {
-		if (pt1_read_reg(pt1, 0) & 0x00000002)
-			return 0;
-		schedule_timeout_uninterruptible((HZ + 999) / 1000);
-	}
-	pt1_printk(KERN_ERR, pt1, "could not reset RAM\n");
-	return -EIO;
-}
-
-static int pt1_do_enable_ram(struct pt1 *pt1)
-{
-	int i, j;
-	u32 status;
-	status = pt1_read_reg(pt1, 0) & 0x00000004;
-	pt1_write_reg(pt1, 0, 0x00000002);
-	for (i = 0; i < 10; i++) {
-		for (j = 0; j < 1024; j++) {
-			if ((pt1_read_reg(pt1, 0) & 0x00000004) != status)
-				return 0;
-		}
-		schedule_timeout_uninterruptible((HZ + 999) / 1000);
-	}
-	pt1_printk(KERN_ERR, pt1, "could not enable RAM\n");
-	return -EIO;
-}
-
-static int pt1_enable_ram(struct pt1 *pt1)
-{
-	int i, ret;
-	int phase;
-	schedule_timeout_uninterruptible((HZ + 999) / 1000);
-	phase = pt1->pdev->device == 0x211a ? 128 : 166;
-	for (i = 0; i < phase; i++) {
-		ret = pt1_do_enable_ram(pt1);
-		if (ret < 0)
-			return ret;
-	}
-	return 0;
-}
-
-static void pt1_disable_ram(struct pt1 *pt1)
-{
-	pt1_write_reg(pt1, 0, 0x0b0b0000);
-}
-
-static void pt1_set_stream(struct pt1 *pt1, int index, int enabled)
-{
-	pt1_write_reg(pt1, 2, 1 << (index + 8) | enabled << index);
-}
-
-static void pt1_init_streams(struct pt1 *pt1)
-{
-	int i;
-	for (i = 0; i < PT1_NR_ADAPS; i++)
-		pt1_set_stream(pt1, i, 0);
-}
-
-static int pt1_filter(struct pt1 *pt1, struct pt1_buffer_page *page)
-{
-	u32 upacket;
-	int i;
-	int index;
-	struct pt1_adapter *adap;
-	int offset;
-	u8 *buf;
-	int sc;
-
-	if (!page->upackets[PT1_NR_UPACKETS - 1])
-		return 0;
-
-	for (i = 0; i < PT1_NR_UPACKETS; i++) {
-		upacket = le32_to_cpu(page->upackets[i]);
-		index = (upacket >> 29) - 1;
-		if (index < 0 || index >=  PT1_NR_ADAPS)
-			continue;
-
-		adap = pt1->adaps[index];
-		if (upacket >> 25 & 1)
-			adap->upacket_count = 0;
-		else if (!adap->upacket_count)
-			continue;
-
-		if (upacket >> 24 & 1)
-			printk_ratelimited(KERN_INFO "earth-pt1: device "
-				"buffer overflowing. table[%d] buf[%d]\n",
-				pt1->table_index, pt1->buf_index);
-		sc = upacket >> 26 & 0x7;
-		if (adap->st_count != -1 && sc != ((adap->st_count + 1) & 0x7))
-			printk_ratelimited(KERN_INFO "earth-pt1: data loss"
-				" in streamID(adapter)[%d]\n", index);
-		adap->st_count = sc;
-
-		buf = adap->buf;
-		offset = adap->packet_count * 188 + adap->upacket_count * 3;
-		buf[offset] = upacket >> 16;
-		buf[offset + 1] = upacket >> 8;
-		if (adap->upacket_count != 62)
-			buf[offset + 2] = upacket;
-
-		if (++adap->upacket_count >= 63) {
-			adap->upacket_count = 0;
-			if (++adap->packet_count >= 21) {
-				dvb_dmx_swfilter_packets(&adap->demux, buf, 21);
-				adap->packet_count = 0;
-			}
-		}
-	}
-
-	page->upackets[PT1_NR_UPACKETS - 1] = 0;
-	return 1;
-}
-
-static int pt1_thread(void *data)
-{
-	struct pt1 *pt1;
-	struct pt1_buffer_page *page;
-
-	pt1 = data;
-	set_freezable();
-
-	while (!kthread_should_stop()) {
-		try_to_freeze();
-
-		page = pt1->tables[pt1->table_index].bufs[pt1->buf_index].page;
-		if (!pt1_filter(pt1, page)) {
-			schedule_timeout_interruptible((HZ + 999) / 1000);
-			continue;
-		}
-
-		if (++pt1->buf_index >= PT1_NR_BUFS) {
-			pt1_increment_table_count(pt1);
-			pt1->buf_index = 0;
-			if (++pt1->table_index >= pt1_nr_tables)
-				pt1->table_index = 0;
-		}
-	}
-
-	return 0;
-}
-
-static void pt1_free_page(struct pt1 *pt1, void *page, dma_addr_t addr)
-{
-	dma_free_coherent(&pt1->pdev->dev, PT1_PAGE_SIZE, page, addr);
-}
-
-static void *pt1_alloc_page(struct pt1 *pt1, dma_addr_t *addrp, u32 *pfnp)
-{
-	void *page;
-	dma_addr_t addr;
-
-	page = dma_alloc_coherent(&pt1->pdev->dev, PT1_PAGE_SIZE, &addr,
-				  GFP_KERNEL);
-	if (page == NULL)
-		return NULL;
-
-	BUG_ON(addr & (PT1_PAGE_SIZE - 1));
-	BUG_ON(addr >> PT1_PAGE_SHIFT >> 31 >> 1);
-
-	*addrp = addr;
-	*pfnp = addr >> PT1_PAGE_SHIFT;
-	return page;
-}
-
-static void pt1_cleanup_buffer(struct pt1 *pt1, struct pt1_buffer *buf)
-{
-	pt1_free_page(pt1, buf->page, buf->addr);
-}
-
-static int
-pt1_init_buffer(struct pt1 *pt1, struct pt1_buffer *buf,  u32 *pfnp)
-{
-	struct pt1_buffer_page *page;
-	dma_addr_t addr;
-
-	page = pt1_alloc_page(pt1, &addr, pfnp);
-	if (page == NULL)
-		return -ENOMEM;
-
-	page->upackets[PT1_NR_UPACKETS - 1] = 0;
-
-	buf->page = page;
-	buf->addr = addr;
-	return 0;
-}
-
-static void pt1_cleanup_table(struct pt1 *pt1, struct pt1_table *table)
-{
-	int i;
-
-	for (i = 0; i < PT1_NR_BUFS; i++)
-		pt1_cleanup_buffer(pt1, &table->bufs[i]);
-
-	pt1_free_page(pt1, table->page, table->addr);
-}
-
-static int
-pt1_init_table(struct pt1 *pt1, struct pt1_table *table, u32 *pfnp)
-{
-	struct pt1_table_page *page;
-	dma_addr_t addr;
-	int i, ret;
-	u32 buf_pfn;
-
-	page = pt1_alloc_page(pt1, &addr, pfnp);
-	if (page == NULL)
-		return -ENOMEM;
-
-	for (i = 0; i < PT1_NR_BUFS; i++) {
-		ret = pt1_init_buffer(pt1, &table->bufs[i], &buf_pfn);
-		if (ret < 0)
-			goto err;
-
-		page->buf_pfns[i] = cpu_to_le32(buf_pfn);
-	}
-
-	pt1_increment_table_count(pt1);
-	table->page = page;
-	table->addr = addr;
-	return 0;
-
-err:
-	while (i--)
-		pt1_cleanup_buffer(pt1, &table->bufs[i]);
-
-	pt1_free_page(pt1, page, addr);
-	return ret;
-}
-
-static void pt1_cleanup_tables(struct pt1 *pt1)
-{
-	struct pt1_table *tables;
-	int i;
-
-	tables = pt1->tables;
-	pt1_unregister_tables(pt1);
-
-	for (i = 0; i < pt1_nr_tables; i++)
-		pt1_cleanup_table(pt1, &tables[i]);
-
-	vfree(tables);
-}
-
-static int pt1_init_tables(struct pt1 *pt1)
-{
-	struct pt1_table *tables;
-	int i, ret;
-	u32 first_pfn, pfn;
-
-	tables = vmalloc(sizeof(struct pt1_table) * pt1_nr_tables);
-	if (tables == NULL)
-		return -ENOMEM;
-
-	pt1_init_table_count(pt1);
-
-	i = 0;
-	if (pt1_nr_tables) {
-		ret = pt1_init_table(pt1, &tables[0], &first_pfn);
-		if (ret)
-			goto err;
-		i++;
-	}
-
-	while (i < pt1_nr_tables) {
-		ret = pt1_init_table(pt1, &tables[i], &pfn);
-		if (ret)
-			goto err;
-		tables[i - 1].page->next_pfn = cpu_to_le32(pfn);
-		i++;
-	}
-
-	tables[pt1_nr_tables - 1].page->next_pfn = cpu_to_le32(first_pfn);
-
-	pt1_register_tables(pt1, first_pfn);
-	pt1->tables = tables;
-	return 0;
-
-err:
-	while (i--)
-		pt1_cleanup_table(pt1, &tables[i]);
-
-	vfree(tables);
-	return ret;
-}
-
-static int pt1_start_polling(struct pt1 *pt1)
-{
-	int ret = 0;
-
-	mutex_lock(&pt1->lock);
-	if (!pt1->kthread) {
-		pt1->kthread = kthread_run(pt1_thread, pt1, "earth-pt1");
-		if (IS_ERR(pt1->kthread)) {
-			ret = PTR_ERR(pt1->kthread);
-			pt1->kthread = NULL;
-		}
-	}
-	mutex_unlock(&pt1->lock);
-	return ret;
-}
-
-static int pt1_start_feed(struct dvb_demux_feed *feed)
-{
-	struct pt1_adapter *adap;
-	adap = container_of(feed->demux, struct pt1_adapter, demux);
-	if (!adap->users++) {
-		int ret;
-
-		ret = pt1_start_polling(adap->pt1);
-		if (ret)
-			return ret;
-		pt1_set_stream(adap->pt1, adap->index, 1);
-	}
-	return 0;
-}
-
-static void pt1_stop_polling(struct pt1 *pt1)
-{
-	int i, count;
-
-	mutex_lock(&pt1->lock);
-	for (i = 0, count = 0; i < PT1_NR_ADAPS; i++)
-		count += pt1->adaps[i]->users;
-
-	if (count == 0 && pt1->kthread) {
-		kthread_stop(pt1->kthread);
-		pt1->kthread = NULL;
-	}
-	mutex_unlock(&pt1->lock);
-}
-
-static int pt1_stop_feed(struct dvb_demux_feed *feed)
-{
-	struct pt1_adapter *adap;
-	adap = container_of(feed->demux, struct pt1_adapter, demux);
-	if (!--adap->users) {
-		pt1_set_stream(adap->pt1, adap->index, 0);
-		pt1_stop_polling(adap->pt1);
-	}
-	return 0;
-}
-
-static void
-pt1_update_power(struct pt1 *pt1)
-{
-	int bits;
-	int i;
-	struct pt1_adapter *adap;
-	static const int sleep_bits[] = {
-		1 << 4,
-		1 << 6 | 1 << 7,
-		1 << 5,
-		1 << 6 | 1 << 8,
-	};
-
-	bits = pt1->power | !pt1->reset << 3;
-	mutex_lock(&pt1->lock);
-	for (i = 0; i < PT1_NR_ADAPS; i++) {
-		adap = pt1->adaps[i];
-		switch (adap->voltage) {
-		case SEC_VOLTAGE_13: /* actually 11V */
-			bits |= 1 << 1;
-			break;
-		case SEC_VOLTAGE_18: /* actually 15V */
-			bits |= 1 << 1 | 1 << 2;
-			break;
-		default:
-			break;
-		}
-
-		/* XXX: The bits should be changed depending on adap->sleep. */
-		bits |= sleep_bits[i];
-	}
-	pt1_write_reg(pt1, 1, bits);
-	mutex_unlock(&pt1->lock);
-}
-
-static int pt1_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-{
-	struct pt1_adapter *adap;
-
-	adap = container_of(fe->dvb, struct pt1_adapter, adap);
-	adap->voltage = voltage;
-	pt1_update_power(adap->pt1);
-
-	if (adap->orig_set_voltage)
-		return adap->orig_set_voltage(fe, voltage);
-	else
-		return 0;
-}
-
-static int pt1_sleep(struct dvb_frontend *fe)
-{
-	struct pt1_adapter *adap;
-
-	adap = container_of(fe->dvb, struct pt1_adapter, adap);
-	adap->sleep = 1;
-	pt1_update_power(adap->pt1);
-
-	if (adap->orig_sleep)
-		return adap->orig_sleep(fe);
-	else
-		return 0;
-}
-
-static int pt1_wakeup(struct dvb_frontend *fe)
-{
-	struct pt1_adapter *adap;
-
-	adap = container_of(fe->dvb, struct pt1_adapter, adap);
-	adap->sleep = 0;
-	pt1_update_power(adap->pt1);
-	schedule_timeout_uninterruptible((HZ + 999) / 1000);
-
-	if (adap->orig_init)
-		return adap->orig_init(fe);
-	else
-		return 0;
-}
-
-static void pt1_free_adapter(struct pt1_adapter *adap)
-{
-	adap->demux.dmx.close(&adap->demux.dmx);
-	dvb_dmxdev_release(&adap->dmxdev);
-	dvb_dmx_release(&adap->demux);
-	dvb_unregister_adapter(&adap->adap);
-	free_page((unsigned long)adap->buf);
-	kfree(adap);
-}
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static struct pt1_adapter *
-pt1_alloc_adapter(struct pt1 *pt1)
-{
-	struct pt1_adapter *adap;
-	void *buf;
-	struct dvb_adapter *dvb_adap;
-	struct dvb_demux *demux;
-	struct dmxdev *dmxdev;
-	int ret;
-
-	adap = kzalloc(sizeof(struct pt1_adapter), GFP_KERNEL);
-	if (!adap) {
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	adap->pt1 = pt1;
-
-	adap->voltage = SEC_VOLTAGE_OFF;
-	adap->sleep = 1;
-
-	buf = (u8 *)__get_free_page(GFP_KERNEL);
-	if (!buf) {
-		ret = -ENOMEM;
-		goto err_kfree;
-	}
-
-	adap->buf = buf;
-	adap->upacket_count = 0;
-	adap->packet_count = 0;
-	adap->st_count = -1;
-
-	dvb_adap = &adap->adap;
-	dvb_adap->priv = adap;
-	ret = dvb_register_adapter(dvb_adap, DRIVER_NAME, THIS_MODULE,
-				   &pt1->pdev->dev, adapter_nr);
-	if (ret < 0)
-		goto err_free_page;
-
-	demux = &adap->demux;
-	demux->dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING;
-	demux->priv = adap;
-	demux->feednum = 256;
-	demux->filternum = 256;
-	demux->start_feed = pt1_start_feed;
-	demux->stop_feed = pt1_stop_feed;
-	demux->write_to_decoder = NULL;
-	ret = dvb_dmx_init(demux);
-	if (ret < 0)
-		goto err_unregister_adapter;
-
-	dmxdev = &adap->dmxdev;
-	dmxdev->filternum = 256;
-	dmxdev->demux = &demux->dmx;
-	dmxdev->capabilities = 0;
-	ret = dvb_dmxdev_init(dmxdev, dvb_adap);
-	if (ret < 0)
-		goto err_dmx_release;
-
-	return adap;
-
-err_dmx_release:
-	dvb_dmx_release(demux);
-err_unregister_adapter:
-	dvb_unregister_adapter(dvb_adap);
-err_free_page:
-	free_page((unsigned long)buf);
-err_kfree:
-	kfree(adap);
-err:
-	return ERR_PTR(ret);
-}
-
-static void pt1_cleanup_adapters(struct pt1 *pt1)
-{
-	int i;
-	for (i = 0; i < PT1_NR_ADAPS; i++)
-		pt1_free_adapter(pt1->adaps[i]);
-}
-
-static int pt1_init_adapters(struct pt1 *pt1)
-{
-	int i;
-	struct pt1_adapter *adap;
-	int ret;
-
-	for (i = 0; i < PT1_NR_ADAPS; i++) {
-		adap = pt1_alloc_adapter(pt1);
-		if (IS_ERR(adap)) {
-			ret = PTR_ERR(adap);
-			goto err;
-		}
-
-		adap->index = i;
-		pt1->adaps[i] = adap;
-	}
-	return 0;
-
-err:
-	while (i--)
-		pt1_free_adapter(pt1->adaps[i]);
-
-	return ret;
-}
-
-static void pt1_cleanup_frontend(struct pt1_adapter *adap)
-{
-	dvb_unregister_frontend(adap->fe);
-}
-
-static int pt1_init_frontend(struct pt1_adapter *adap, struct dvb_frontend *fe)
-{
-	int ret;
-
-	adap->orig_set_voltage = fe->ops.set_voltage;
-	adap->orig_sleep = fe->ops.sleep;
-	adap->orig_init = fe->ops.init;
-	fe->ops.set_voltage = pt1_set_voltage;
-	fe->ops.sleep = pt1_sleep;
-	fe->ops.init = pt1_wakeup;
-
-	ret = dvb_register_frontend(&adap->adap, fe);
-	if (ret < 0)
-		return ret;
-
-	adap->fe = fe;
-	return 0;
-}
-
-static void pt1_cleanup_frontends(struct pt1 *pt1)
-{
-	int i;
-	for (i = 0; i < PT1_NR_ADAPS; i++)
-		pt1_cleanup_frontend(pt1->adaps[i]);
-}
-
-struct pt1_config {
-	struct va1j5jf8007s_config va1j5jf8007s_config;
-	struct va1j5jf8007t_config va1j5jf8007t_config;
-};
-
-static const struct pt1_config pt1_configs[2] = {
-	{
-		{
-			.demod_address = 0x1b,
-			.frequency = VA1J5JF8007S_20MHZ,
-		},
-		{
-			.demod_address = 0x1a,
-			.frequency = VA1J5JF8007T_20MHZ,
-		},
-	}, {
-		{
-			.demod_address = 0x19,
-			.frequency = VA1J5JF8007S_20MHZ,
-		},
-		{
-			.demod_address = 0x18,
-			.frequency = VA1J5JF8007T_20MHZ,
-		},
-	},
-};
-
-static const struct pt1_config pt2_configs[2] = {
-	{
-		{
-			.demod_address = 0x1b,
-			.frequency = VA1J5JF8007S_25MHZ,
-		},
-		{
-			.demod_address = 0x1a,
-			.frequency = VA1J5JF8007T_25MHZ,
-		},
-	}, {
-		{
-			.demod_address = 0x19,
-			.frequency = VA1J5JF8007S_25MHZ,
-		},
-		{
-			.demod_address = 0x18,
-			.frequency = VA1J5JF8007T_25MHZ,
-		},
-	},
-};
-
-static int pt1_init_frontends(struct pt1 *pt1)
-{
-	int i, j;
-	struct i2c_adapter *i2c_adap;
-	const struct pt1_config *configs, *config;
-	struct dvb_frontend *fe[4];
-	int ret;
-
-	i = 0;
-	j = 0;
-
-	i2c_adap = &pt1->i2c_adap;
-	configs = pt1->pdev->device == 0x211a ? pt1_configs : pt2_configs;
-	do {
-		config = &configs[i / 2];
-
-		fe[i] = va1j5jf8007s_attach(&config->va1j5jf8007s_config,
-					    i2c_adap);
-		if (!fe[i]) {
-			ret = -ENODEV; /* This does not sound nice... */
-			goto err;
-		}
-		i++;
-
-		fe[i] = va1j5jf8007t_attach(&config->va1j5jf8007t_config,
-					    i2c_adap);
-		if (!fe[i]) {
-			ret = -ENODEV;
-			goto err;
-		}
-		i++;
-
-		ret = va1j5jf8007s_prepare(fe[i - 2]);
-		if (ret < 0)
-			goto err;
-
-		ret = va1j5jf8007t_prepare(fe[i - 1]);
-		if (ret < 0)
-			goto err;
-
-	} while (i < 4);
-
-	do {
-		ret = pt1_init_frontend(pt1->adaps[j], fe[j]);
-		if (ret < 0)
-			goto err;
-	} while (++j < 4);
-
-	return 0;
-
-err:
-	while (i-- > j)
-		fe[i]->ops.release(fe[i]);
-
-	while (j--)
-		dvb_unregister_frontend(fe[j]);
-
-	return ret;
-}
-
-static void pt1_i2c_emit(struct pt1 *pt1, int addr, int busy, int read_enable,
-			 int clock, int data, int next_addr)
-{
-	pt1_write_reg(pt1, 4, addr << 18 | busy << 13 | read_enable << 12 |
-		      !clock << 11 | !data << 10 | next_addr);
-}
-
-static void pt1_i2c_write_bit(struct pt1 *pt1, int addr, int *addrp, int data)
-{
-	pt1_i2c_emit(pt1, addr,     1, 0, 0, data, addr + 1);
-	pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, data, addr + 2);
-	pt1_i2c_emit(pt1, addr + 2, 1, 0, 0, data, addr + 3);
-	*addrp = addr + 3;
-}
-
-static void pt1_i2c_read_bit(struct pt1 *pt1, int addr, int *addrp)
-{
-	pt1_i2c_emit(pt1, addr,     1, 0, 0, 1, addr + 1);
-	pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 1, addr + 2);
-	pt1_i2c_emit(pt1, addr + 2, 1, 1, 1, 1, addr + 3);
-	pt1_i2c_emit(pt1, addr + 3, 1, 0, 0, 1, addr + 4);
-	*addrp = addr + 4;
-}
-
-static void pt1_i2c_write_byte(struct pt1 *pt1, int addr, int *addrp, int data)
-{
-	int i;
-	for (i = 0; i < 8; i++)
-		pt1_i2c_write_bit(pt1, addr, &addr, data >> (7 - i) & 1);
-	pt1_i2c_write_bit(pt1, addr, &addr, 1);
-	*addrp = addr;
-}
-
-static void pt1_i2c_read_byte(struct pt1 *pt1, int addr, int *addrp, int last)
-{
-	int i;
-	for (i = 0; i < 8; i++)
-		pt1_i2c_read_bit(pt1, addr, &addr);
-	pt1_i2c_write_bit(pt1, addr, &addr, last);
-	*addrp = addr;
-}
-
-static void pt1_i2c_prepare(struct pt1 *pt1, int addr, int *addrp)
-{
-	pt1_i2c_emit(pt1, addr,     1, 0, 1, 1, addr + 1);
-	pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 0, addr + 2);
-	pt1_i2c_emit(pt1, addr + 2, 1, 0, 0, 0, addr + 3);
-	*addrp = addr + 3;
-}
-
-static void
-pt1_i2c_write_msg(struct pt1 *pt1, int addr, int *addrp, struct i2c_msg *msg)
-{
-	int i;
-	pt1_i2c_prepare(pt1, addr, &addr);
-	pt1_i2c_write_byte(pt1, addr, &addr, msg->addr << 1);
-	for (i = 0; i < msg->len; i++)
-		pt1_i2c_write_byte(pt1, addr, &addr, msg->buf[i]);
-	*addrp = addr;
-}
-
-static void
-pt1_i2c_read_msg(struct pt1 *pt1, int addr, int *addrp, struct i2c_msg *msg)
-{
-	int i;
-	pt1_i2c_prepare(pt1, addr, &addr);
-	pt1_i2c_write_byte(pt1, addr, &addr, msg->addr << 1 | 1);
-	for (i = 0; i < msg->len; i++)
-		pt1_i2c_read_byte(pt1, addr, &addr, i == msg->len - 1);
-	*addrp = addr;
-}
-
-static int pt1_i2c_end(struct pt1 *pt1, int addr)
-{
-	pt1_i2c_emit(pt1, addr,     1, 0, 0, 0, addr + 1);
-	pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 0, addr + 2);
-	pt1_i2c_emit(pt1, addr + 2, 1, 0, 1, 1, 0);
-
-	pt1_write_reg(pt1, 0, 0x00000004);
-	do {
-		if (signal_pending(current))
-			return -EINTR;
-		schedule_timeout_interruptible((HZ + 999) / 1000);
-	} while (pt1_read_reg(pt1, 0) & 0x00000080);
-	return 0;
-}
-
-static void pt1_i2c_begin(struct pt1 *pt1, int *addrp)
-{
-	int addr;
-	addr = 0;
-
-	pt1_i2c_emit(pt1, addr,     0, 0, 1, 1, addr /* itself */);
-	addr = addr + 1;
-
-	if (!pt1->i2c_running) {
-		pt1_i2c_emit(pt1, addr,     1, 0, 1, 1, addr + 1);
-		pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 0, addr + 2);
-		addr = addr + 2;
-		pt1->i2c_running = 1;
-	}
-	*addrp = addr;
-}
-
-static int pt1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
-{
-	struct pt1 *pt1;
-	int i;
-	struct i2c_msg *msg, *next_msg;
-	int addr, ret;
-	u16 len;
-	u32 word;
-
-	pt1 = i2c_get_adapdata(adap);
-
-	for (i = 0; i < num; i++) {
-		msg = &msgs[i];
-		if (msg->flags & I2C_M_RD)
-			return -ENOTSUPP;
-
-		if (i + 1 < num)
-			next_msg = &msgs[i + 1];
-		else
-			next_msg = NULL;
-
-		if (next_msg && next_msg->flags & I2C_M_RD) {
-			i++;
-
-			len = next_msg->len;
-			if (len > 4)
-				return -ENOTSUPP;
-
-			pt1_i2c_begin(pt1, &addr);
-			pt1_i2c_write_msg(pt1, addr, &addr, msg);
-			pt1_i2c_read_msg(pt1, addr, &addr, next_msg);
-			ret = pt1_i2c_end(pt1, addr);
-			if (ret < 0)
-				return ret;
-
-			word = pt1_read_reg(pt1, 2);
-			while (len--) {
-				next_msg->buf[len] = word;
-				word >>= 8;
-			}
-		} else {
-			pt1_i2c_begin(pt1, &addr);
-			pt1_i2c_write_msg(pt1, addr, &addr, msg);
-			ret = pt1_i2c_end(pt1, addr);
-			if (ret < 0)
-				return ret;
-		}
-	}
-
-	return num;
-}
-
-static u32 pt1_i2c_func(struct i2c_adapter *adap)
-{
-	return I2C_FUNC_I2C;
-}
-
-static const struct i2c_algorithm pt1_i2c_algo = {
-	.master_xfer = pt1_i2c_xfer,
-	.functionality = pt1_i2c_func,
-};
-
-static void pt1_i2c_wait(struct pt1 *pt1)
-{
-	int i;
-	for (i = 0; i < 128; i++)
-		pt1_i2c_emit(pt1, 0, 0, 0, 1, 1, 0);
-}
-
-static void pt1_i2c_init(struct pt1 *pt1)
-{
-	int i;
-	for (i = 0; i < 1024; i++)
-		pt1_i2c_emit(pt1, i, 0, 0, 1, 1, 0);
-}
-
-static void __devexit pt1_remove(struct pci_dev *pdev)
-{
-	struct pt1 *pt1;
-	void __iomem *regs;
-
-	pt1 = pci_get_drvdata(pdev);
-	regs = pt1->regs;
-
-	if (pt1->kthread)
-		kthread_stop(pt1->kthread);
-	pt1_cleanup_tables(pt1);
-	pt1_cleanup_frontends(pt1);
-	pt1_disable_ram(pt1);
-	pt1->power = 0;
-	pt1->reset = 1;
-	pt1_update_power(pt1);
-	pt1_cleanup_adapters(pt1);
-	i2c_del_adapter(&pt1->i2c_adap);
-	pci_set_drvdata(pdev, NULL);
-	kfree(pt1);
-	pci_iounmap(pdev, regs);
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-}
-
-static int __devinit
-pt1_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
-	int ret;
-	void __iomem *regs;
-	struct pt1 *pt1;
-	struct i2c_adapter *i2c_adap;
-
-	ret = pci_enable_device(pdev);
-	if (ret < 0)
-		goto err;
-
-	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-	if (ret < 0)
-		goto err_pci_disable_device;
-
-	pci_set_master(pdev);
-
-	ret = pci_request_regions(pdev, DRIVER_NAME);
-	if (ret < 0)
-		goto err_pci_disable_device;
-
-	regs = pci_iomap(pdev, 0, 0);
-	if (!regs) {
-		ret = -EIO;
-		goto err_pci_release_regions;
-	}
-
-	pt1 = kzalloc(sizeof(struct pt1), GFP_KERNEL);
-	if (!pt1) {
-		ret = -ENOMEM;
-		goto err_pci_iounmap;
-	}
-
-	mutex_init(&pt1->lock);
-	pt1->pdev = pdev;
-	pt1->regs = regs;
-	pci_set_drvdata(pdev, pt1);
-
-	ret = pt1_init_adapters(pt1);
-	if (ret < 0)
-		goto err_kfree;
-
-	mutex_init(&pt1->lock);
-
-	pt1->power = 0;
-	pt1->reset = 1;
-	pt1_update_power(pt1);
-
-	i2c_adap = &pt1->i2c_adap;
-	i2c_adap->algo = &pt1_i2c_algo;
-	i2c_adap->algo_data = NULL;
-	i2c_adap->dev.parent = &pdev->dev;
-	strcpy(i2c_adap->name, DRIVER_NAME);
-	i2c_set_adapdata(i2c_adap, pt1);
-	ret = i2c_add_adapter(i2c_adap);
-	if (ret < 0)
-		goto err_pt1_cleanup_adapters;
-
-	pt1_i2c_init(pt1);
-	pt1_i2c_wait(pt1);
-
-	ret = pt1_sync(pt1);
-	if (ret < 0)
-		goto err_i2c_del_adapter;
-
-	pt1_identify(pt1);
-
-	ret = pt1_unlock(pt1);
-	if (ret < 0)
-		goto err_i2c_del_adapter;
-
-	ret = pt1_reset_pci(pt1);
-	if (ret < 0)
-		goto err_i2c_del_adapter;
-
-	ret = pt1_reset_ram(pt1);
-	if (ret < 0)
-		goto err_i2c_del_adapter;
-
-	ret = pt1_enable_ram(pt1);
-	if (ret < 0)
-		goto err_i2c_del_adapter;
-
-	pt1_init_streams(pt1);
-
-	pt1->power = 1;
-	pt1_update_power(pt1);
-	schedule_timeout_uninterruptible((HZ + 49) / 50);
-
-	pt1->reset = 0;
-	pt1_update_power(pt1);
-	schedule_timeout_uninterruptible((HZ + 999) / 1000);
-
-	ret = pt1_init_frontends(pt1);
-	if (ret < 0)
-		goto err_pt1_disable_ram;
-
-	ret = pt1_init_tables(pt1);
-	if (ret < 0)
-		goto err_pt1_cleanup_frontends;
-
-	return 0;
-
-err_pt1_cleanup_frontends:
-	pt1_cleanup_frontends(pt1);
-err_pt1_disable_ram:
-	pt1_disable_ram(pt1);
-	pt1->power = 0;
-	pt1->reset = 1;
-	pt1_update_power(pt1);
-err_i2c_del_adapter:
-	i2c_del_adapter(i2c_adap);
-err_pt1_cleanup_adapters:
-	pt1_cleanup_adapters(pt1);
-err_kfree:
-	pci_set_drvdata(pdev, NULL);
-	kfree(pt1);
-err_pci_iounmap:
-	pci_iounmap(pdev, regs);
-err_pci_release_regions:
-	pci_release_regions(pdev);
-err_pci_disable_device:
-	pci_disable_device(pdev);
-err:
-	return ret;
-
-}
-
-static struct pci_device_id pt1_id_table[] = {
-	{ PCI_DEVICE(0x10ee, 0x211a) },
-	{ PCI_DEVICE(0x10ee, 0x222a) },
-	{ },
-};
-MODULE_DEVICE_TABLE(pci, pt1_id_table);
-
-static struct pci_driver pt1_driver = {
-	.name		= DRIVER_NAME,
-	.probe		= pt1_probe,
-	.remove		= __devexit_p(pt1_remove),
-	.id_table	= pt1_id_table,
-};
-
-
-static int __init pt1_init(void)
-{
-	return pci_register_driver(&pt1_driver);
-}
-
-
-static void __exit pt1_cleanup(void)
-{
-	pci_unregister_driver(&pt1_driver);
-}
-
-module_init(pt1_init);
-module_exit(pt1_cleanup);
-
-MODULE_AUTHOR("Takahito HIRANO <hiranotaka@zng.info>");
-MODULE_DESCRIPTION("Earthsoft PT1/PT2 Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/pt1/va1j5jf8007s.c b/drivers/media/dvb/pt1/va1j5jf8007s.c
deleted file mode 100644
index d980dfb..0000000
--- a/drivers/media/dvb/pt1/va1j5jf8007s.c
+++ /dev/null
@@ -1,735 +0,0 @@
-/*
- * ISDB-S driver for VA1J5JF8007/VA1J5JF8011
- *
- * Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info>
- *
- * based on pt1dvr - http://pt1dvr.sourceforge.jp/
- * 	by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-#include "va1j5jf8007s.h"
-
-enum va1j5jf8007s_tune_state {
-	VA1J5JF8007S_IDLE,
-	VA1J5JF8007S_SET_FREQUENCY_1,
-	VA1J5JF8007S_SET_FREQUENCY_2,
-	VA1J5JF8007S_SET_FREQUENCY_3,
-	VA1J5JF8007S_CHECK_FREQUENCY,
-	VA1J5JF8007S_SET_MODULATION,
-	VA1J5JF8007S_CHECK_MODULATION,
-	VA1J5JF8007S_SET_TS_ID,
-	VA1J5JF8007S_CHECK_TS_ID,
-	VA1J5JF8007S_TRACK,
-};
-
-struct va1j5jf8007s_state {
-	const struct va1j5jf8007s_config *config;
-	struct i2c_adapter *adap;
-	struct dvb_frontend fe;
-	enum va1j5jf8007s_tune_state tune_state;
-};
-
-static int va1j5jf8007s_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct va1j5jf8007s_state *state;
-	u8 addr;
-	int i;
-	u8 write_buf[1], read_buf[1];
-	struct i2c_msg msgs[2];
-	s32 word, x1, x2, x3, x4, x5, y;
-
-	state = fe->demodulator_priv;
-	addr = state->config->demod_address;
-
-	word = 0;
-	for (i = 0; i < 2; i++) {
-		write_buf[0] = 0xbc + i;
-
-		msgs[0].addr = addr;
-		msgs[0].flags = 0;
-		msgs[0].len = sizeof(write_buf);
-		msgs[0].buf = write_buf;
-
-		msgs[1].addr = addr;
-		msgs[1].flags = I2C_M_RD;
-		msgs[1].len = sizeof(read_buf);
-		msgs[1].buf = read_buf;
-
-		if (i2c_transfer(state->adap, msgs, 2) != 2)
-			return -EREMOTEIO;
-
-		word <<= 8;
-		word |= read_buf[0];
-	}
-
-	word -= 3000;
-	if (word < 0)
-		word = 0;
-
-	x1 = int_sqrt(word << 16) * ((15625ll << 21) / 1000000);
-	x2 = (s64)x1 * x1 >> 31;
-	x3 = (s64)x2 * x1 >> 31;
-	x4 = (s64)x2 * x2 >> 31;
-	x5 = (s64)x4 * x1 >> 31;
-
-	y = (58857ll << 23) / 1000;
-	y -= (s64)x1 * ((89565ll << 24) / 1000) >> 30;
-	y += (s64)x2 * ((88977ll << 24) / 1000) >> 28;
-	y -= (s64)x3 * ((50259ll << 25) / 1000) >> 27;
-	y += (s64)x4 * ((14341ll << 27) / 1000) >> 27;
-	y -= (s64)x5 * ((16346ll << 30) / 10000) >> 28;
-
-	*snr = y < 0 ? 0 : y >> 15;
-	return 0;
-}
-
-static int va1j5jf8007s_get_frontend_algo(struct dvb_frontend *fe)
-{
-	return DVBFE_ALGO_HW;
-}
-
-static int
-va1j5jf8007s_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct va1j5jf8007s_state *state;
-
-	state = fe->demodulator_priv;
-
-	switch (state->tune_state) {
-	case VA1J5JF8007S_IDLE:
-	case VA1J5JF8007S_SET_FREQUENCY_1:
-	case VA1J5JF8007S_SET_FREQUENCY_2:
-	case VA1J5JF8007S_SET_FREQUENCY_3:
-	case VA1J5JF8007S_CHECK_FREQUENCY:
-		*status = 0;
-		return 0;
-
-
-	case VA1J5JF8007S_SET_MODULATION:
-	case VA1J5JF8007S_CHECK_MODULATION:
-		*status |= FE_HAS_SIGNAL;
-		return 0;
-
-	case VA1J5JF8007S_SET_TS_ID:
-	case VA1J5JF8007S_CHECK_TS_ID:
-		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER;
-		return 0;
-
-	case VA1J5JF8007S_TRACK:
-		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK;
-		return 0;
-	}
-
-	BUG();
-}
-
-struct va1j5jf8007s_cb_map {
-	u32 frequency;
-	u8 cb;
-};
-
-static const struct va1j5jf8007s_cb_map va1j5jf8007s_cb_maps[] = {
-	{  986000, 0xb2 },
-	{ 1072000, 0xd2 },
-	{ 1154000, 0xe2 },
-	{ 1291000, 0x20 },
-	{ 1447000, 0x40 },
-	{ 1615000, 0x60 },
-	{ 1791000, 0x80 },
-	{ 1972000, 0xa0 },
-};
-
-static u8 va1j5jf8007s_lookup_cb(u32 frequency)
-{
-	int i;
-	const struct va1j5jf8007s_cb_map *map;
-
-	for (i = 0; i < ARRAY_SIZE(va1j5jf8007s_cb_maps); i++) {
-		map = &va1j5jf8007s_cb_maps[i];
-		if (frequency < map->frequency)
-			return map->cb;
-	}
-	return 0xc0;
-}
-
-static int va1j5jf8007s_set_frequency_1(struct va1j5jf8007s_state *state)
-{
-	u32 frequency;
-	u16 word;
-	u8 buf[6];
-	struct i2c_msg msg;
-
-	frequency = state->fe.dtv_property_cache.frequency;
-
-	word = (frequency + 500) / 1000;
-	if (frequency < 1072000)
-		word = (word << 1 & ~0x1f) | (word & 0x0f);
-
-	buf[0] = 0xfe;
-	buf[1] = 0xc0;
-	buf[2] = 0x40 | word >> 8;
-	buf[3] = word;
-	buf[4] = 0xe0;
-	buf[5] = va1j5jf8007s_lookup_cb(frequency);
-
-	msg.addr = state->config->demod_address;
-	msg.flags = 0;
-	msg.len = sizeof(buf);
-	msg.buf = buf;
-
-	if (i2c_transfer(state->adap, &msg, 1) != 1)
-		return -EREMOTEIO;
-
-	return 0;
-}
-
-static int va1j5jf8007s_set_frequency_2(struct va1j5jf8007s_state *state)
-{
-	u8 buf[3];
-	struct i2c_msg msg;
-
-	buf[0] = 0xfe;
-	buf[1] = 0xc0;
-	buf[2] = 0xe4;
-
-	msg.addr = state->config->demod_address;
-	msg.flags = 0;
-	msg.len = sizeof(buf);
-	msg.buf = buf;
-
-	if (i2c_transfer(state->adap, &msg, 1) != 1)
-		return -EREMOTEIO;
-
-	return 0;
-}
-
-static int va1j5jf8007s_set_frequency_3(struct va1j5jf8007s_state *state)
-{
-	u32 frequency;
-	u8 buf[4];
-	struct i2c_msg msg;
-
-	frequency = state->fe.dtv_property_cache.frequency;
-
-	buf[0] = 0xfe;
-	buf[1] = 0xc0;
-	buf[2] = 0xf4;
-	buf[3] = va1j5jf8007s_lookup_cb(frequency) | 0x4;
-
-	msg.addr = state->config->demod_address;
-	msg.flags = 0;
-	msg.len = sizeof(buf);
-	msg.buf = buf;
-
-	if (i2c_transfer(state->adap, &msg, 1) != 1)
-		return -EREMOTEIO;
-
-	return 0;
-}
-
-static int
-va1j5jf8007s_check_frequency(struct va1j5jf8007s_state *state, int *lock)
-{
-	u8 addr;
-	u8 write_buf[2], read_buf[1];
-	struct i2c_msg msgs[2];
-
-	addr = state->config->demod_address;
-
-	write_buf[0] = 0xfe;
-	write_buf[1] = 0xc1;
-
-	msgs[0].addr = addr;
-	msgs[0].flags = 0;
-	msgs[0].len = sizeof(write_buf);
-	msgs[0].buf = write_buf;
-
-	msgs[1].addr = addr;
-	msgs[1].flags = I2C_M_RD;
-	msgs[1].len = sizeof(read_buf);
-	msgs[1].buf = read_buf;
-
-	if (i2c_transfer(state->adap, msgs, 2) != 2)
-		return -EREMOTEIO;
-
-	*lock = read_buf[0] & 0x40;
-	return 0;
-}
-
-static int va1j5jf8007s_set_modulation(struct va1j5jf8007s_state *state)
-{
-	u8 buf[2];
-	struct i2c_msg msg;
-
-	buf[0] = 0x03;
-	buf[1] = 0x01;
-
-	msg.addr = state->config->demod_address;
-	msg.flags = 0;
-	msg.len = sizeof(buf);
-	msg.buf = buf;
-
-	if (i2c_transfer(state->adap, &msg, 1) != 1)
-		return -EREMOTEIO;
-
-	return 0;
-}
-
-static int
-va1j5jf8007s_check_modulation(struct va1j5jf8007s_state *state, int *lock)
-{
-	u8 addr;
-	u8 write_buf[1], read_buf[1];
-	struct i2c_msg msgs[2];
-
-	addr = state->config->demod_address;
-
-	write_buf[0] = 0xc3;
-
-	msgs[0].addr = addr;
-	msgs[0].flags = 0;
-	msgs[0].len = sizeof(write_buf);
-	msgs[0].buf = write_buf;
-
-	msgs[1].addr = addr;
-	msgs[1].flags = I2C_M_RD;
-	msgs[1].len = sizeof(read_buf);
-	msgs[1].buf = read_buf;
-
-	if (i2c_transfer(state->adap, msgs, 2) != 2)
-		return -EREMOTEIO;
-
-	*lock = !(read_buf[0] & 0x10);
-	return 0;
-}
-
-static int
-va1j5jf8007s_set_ts_id(struct va1j5jf8007s_state *state)
-{
-	u32 ts_id;
-	u8 buf[3];
-	struct i2c_msg msg;
-
-	ts_id = state->fe.dtv_property_cache.isdbs_ts_id;
-	if (!ts_id)
-		return 0;
-
-	buf[0] = 0x8f;
-	buf[1] = ts_id >> 8;
-	buf[2] = ts_id;
-
-	msg.addr = state->config->demod_address;
-	msg.flags = 0;
-	msg.len = sizeof(buf);
-	msg.buf = buf;
-
-	if (i2c_transfer(state->adap, &msg, 1) != 1)
-		return -EREMOTEIO;
-
-	return 0;
-}
-
-static int
-va1j5jf8007s_check_ts_id(struct va1j5jf8007s_state *state, int *lock)
-{
-	u8 addr;
-	u8 write_buf[1], read_buf[2];
-	struct i2c_msg msgs[2];
-	u32 ts_id;
-
-	ts_id = state->fe.dtv_property_cache.isdbs_ts_id;
-	if (!ts_id) {
-		*lock = 1;
-		return 0;
-	}
-
-	addr = state->config->demod_address;
-
-	write_buf[0] = 0xe6;
-
-	msgs[0].addr = addr;
-	msgs[0].flags = 0;
-	msgs[0].len = sizeof(write_buf);
-	msgs[0].buf = write_buf;
-
-	msgs[1].addr = addr;
-	msgs[1].flags = I2C_M_RD;
-	msgs[1].len = sizeof(read_buf);
-	msgs[1].buf = read_buf;
-
-	if (i2c_transfer(state->adap, msgs, 2) != 2)
-		return -EREMOTEIO;
-
-	*lock = (read_buf[0] << 8 | read_buf[1]) == ts_id;
-	return 0;
-}
-
-static int
-va1j5jf8007s_tune(struct dvb_frontend *fe,
-		  bool re_tune,
-		  unsigned int mode_flags,  unsigned int *delay,
-		  fe_status_t *status)
-{
-	struct va1j5jf8007s_state *state;
-	int ret;
-	int lock = 0;
-
-	state = fe->demodulator_priv;
-
-	if (re_tune)
-		state->tune_state = VA1J5JF8007S_SET_FREQUENCY_1;
-
-	switch (state->tune_state) {
-	case VA1J5JF8007S_IDLE:
-		*delay = 3 * HZ;
-		*status = 0;
-		return 0;
-
-	case VA1J5JF8007S_SET_FREQUENCY_1:
-		ret = va1j5jf8007s_set_frequency_1(state);
-		if (ret < 0)
-			return ret;
-
-		state->tune_state = VA1J5JF8007S_SET_FREQUENCY_2;
-		*delay = 0;
-		*status = 0;
-		return 0;
-
-	case VA1J5JF8007S_SET_FREQUENCY_2:
-		ret = va1j5jf8007s_set_frequency_2(state);
-		if (ret < 0)
-			return ret;
-
-		state->tune_state = VA1J5JF8007S_SET_FREQUENCY_3;
-		*delay = (HZ + 99) / 100;
-		*status = 0;
-		return 0;
-
-	case VA1J5JF8007S_SET_FREQUENCY_3:
-		ret = va1j5jf8007s_set_frequency_3(state);
-		if (ret < 0)
-			return ret;
-
-		state->tune_state = VA1J5JF8007S_CHECK_FREQUENCY;
-		*delay = 0;
-		*status = 0;
-		return 0;
-
-	case VA1J5JF8007S_CHECK_FREQUENCY:
-		ret = va1j5jf8007s_check_frequency(state, &lock);
-		if (ret < 0)
-			return ret;
-
-		if (!lock)  {
-			*delay = (HZ + 999) / 1000;
-			*status = 0;
-			return 0;
-		}
-
-		state->tune_state = VA1J5JF8007S_SET_MODULATION;
-		*delay = 0;
-		*status = FE_HAS_SIGNAL;
-		return 0;
-
-	case VA1J5JF8007S_SET_MODULATION:
-		ret = va1j5jf8007s_set_modulation(state);
-		if (ret < 0)
-			return ret;
-
-		state->tune_state = VA1J5JF8007S_CHECK_MODULATION;
-		*delay = 0;
-		*status = FE_HAS_SIGNAL;
-		return 0;
-
-	case VA1J5JF8007S_CHECK_MODULATION:
-		ret = va1j5jf8007s_check_modulation(state, &lock);
-		if (ret < 0)
-			return ret;
-
-		if (!lock)  {
-			*delay = (HZ + 49) / 50;
-			*status = FE_HAS_SIGNAL;
-			return 0;
-		}
-
-		state->tune_state = VA1J5JF8007S_SET_TS_ID;
-		*delay = 0;
-		*status = FE_HAS_SIGNAL | FE_HAS_CARRIER;
-		return 0;
-
-	case VA1J5JF8007S_SET_TS_ID:
-		ret = va1j5jf8007s_set_ts_id(state);
-		if (ret < 0)
-			return ret;
-
-		state->tune_state = VA1J5JF8007S_CHECK_TS_ID;
-		return 0;
-
-	case VA1J5JF8007S_CHECK_TS_ID:
-		ret = va1j5jf8007s_check_ts_id(state, &lock);
-		if (ret < 0)
-			return ret;
-
-		if (!lock)  {
-			*delay = (HZ + 99) / 100;
-			*status = FE_HAS_SIGNAL | FE_HAS_CARRIER;
-			return 0;
-		}
-
-		state->tune_state = VA1J5JF8007S_TRACK;
-		/* fall through */
-
-	case VA1J5JF8007S_TRACK:
-		*delay = 3 * HZ;
-		*status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK;
-		return 0;
-	}
-
-	BUG();
-}
-
-static int va1j5jf8007s_init_frequency(struct va1j5jf8007s_state *state)
-{
-	u8 buf[4];
-	struct i2c_msg msg;
-
-	buf[0] = 0xfe;
-	buf[1] = 0xc0;
-	buf[2] = 0xf0;
-	buf[3] = 0x04;
-
-	msg.addr = state->config->demod_address;
-	msg.flags = 0;
-	msg.len = sizeof(buf);
-	msg.buf = buf;
-
-	if (i2c_transfer(state->adap, &msg, 1) != 1)
-		return -EREMOTEIO;
-
-	return 0;
-}
-
-static int va1j5jf8007s_set_sleep(struct va1j5jf8007s_state *state, int sleep)
-{
-	u8 buf[2];
-	struct i2c_msg msg;
-
-	buf[0] = 0x17;
-	buf[1] = sleep ? 0x01 : 0x00;
-
-	msg.addr = state->config->demod_address;
-	msg.flags = 0;
-	msg.len = sizeof(buf);
-	msg.buf = buf;
-
-	if (i2c_transfer(state->adap, &msg, 1) != 1)
-		return -EREMOTEIO;
-
-	return 0;
-}
-
-static int va1j5jf8007s_sleep(struct dvb_frontend *fe)
-{
-	struct va1j5jf8007s_state *state;
-	int ret;
-
-	state = fe->demodulator_priv;
-
-	ret = va1j5jf8007s_init_frequency(state);
-	if (ret < 0)
-		return ret;
-
-	return va1j5jf8007s_set_sleep(state, 1);
-}
-
-static int va1j5jf8007s_init(struct dvb_frontend *fe)
-{
-	struct va1j5jf8007s_state *state;
-
-	state = fe->demodulator_priv;
-	state->tune_state = VA1J5JF8007S_IDLE;
-
-	return va1j5jf8007s_set_sleep(state, 0);
-}
-
-static void va1j5jf8007s_release(struct dvb_frontend *fe)
-{
-	struct va1j5jf8007s_state *state;
-	state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops va1j5jf8007s_ops = {
-	.delsys = { SYS_ISDBS },
-	.info = {
-		.name = "VA1J5JF8007/VA1J5JF8011 ISDB-S",
-		.frequency_min = 950000,
-		.frequency_max = 2150000,
-		.frequency_stepsize = 1000,
-		.caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_AUTO |
-			FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO |
-			FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO,
-	},
-
-	.read_snr = va1j5jf8007s_read_snr,
-	.get_frontend_algo = va1j5jf8007s_get_frontend_algo,
-	.read_status = va1j5jf8007s_read_status,
-	.tune = va1j5jf8007s_tune,
-	.sleep = va1j5jf8007s_sleep,
-	.init = va1j5jf8007s_init,
-	.release = va1j5jf8007s_release,
-};
-
-static int va1j5jf8007s_prepare_1(struct va1j5jf8007s_state *state)
-{
-	u8 addr;
-	u8 write_buf[1], read_buf[1];
-	struct i2c_msg msgs[2];
-
-	addr = state->config->demod_address;
-
-	write_buf[0] = 0x07;
-
-	msgs[0].addr = addr;
-	msgs[0].flags = 0;
-	msgs[0].len = sizeof(write_buf);
-	msgs[0].buf = write_buf;
-
-	msgs[1].addr = addr;
-	msgs[1].flags = I2C_M_RD;
-	msgs[1].len = sizeof(read_buf);
-	msgs[1].buf = read_buf;
-
-	if (i2c_transfer(state->adap, msgs, 2) != 2)
-		return -EREMOTEIO;
-
-	if (read_buf[0] != 0x41)
-		return -EIO;
-
-	return 0;
-}
-
-static const u8 va1j5jf8007s_20mhz_prepare_bufs[][2] = {
-	{0x04, 0x02}, {0x0d, 0x55}, {0x11, 0x40}, {0x13, 0x80}, {0x17, 0x01},
-	{0x1c, 0x0a}, {0x1d, 0xaa}, {0x1e, 0x20}, {0x1f, 0x88}, {0x51, 0xb0},
-	{0x52, 0x89}, {0x53, 0xb3}, {0x5a, 0x2d}, {0x5b, 0xd3}, {0x85, 0x69},
-	{0x87, 0x04}, {0x8e, 0x02}, {0xa3, 0xf7}, {0xa5, 0xc0},
-};
-
-static const u8 va1j5jf8007s_25mhz_prepare_bufs[][2] = {
-	{0x04, 0x02}, {0x11, 0x40}, {0x13, 0x80}, {0x17, 0x01}, {0x1c, 0x0a},
-	{0x1d, 0xaa}, {0x1e, 0x20}, {0x1f, 0x88}, {0x51, 0xb0}, {0x52, 0x89},
-	{0x53, 0xb3}, {0x5a, 0x2d}, {0x5b, 0xd3}, {0x85, 0x69}, {0x87, 0x04},
-	{0x8e, 0x26}, {0xa3, 0xf7}, {0xa5, 0xc0},
-};
-
-static int va1j5jf8007s_prepare_2(struct va1j5jf8007s_state *state)
-{
-	const u8 (*bufs)[2];
-	int size;
-	u8 addr;
-	u8 buf[2];
-	struct i2c_msg msg;
-	int i;
-
-	switch (state->config->frequency) {
-	case VA1J5JF8007S_20MHZ:
-		bufs = va1j5jf8007s_20mhz_prepare_bufs;
-		size = ARRAY_SIZE(va1j5jf8007s_20mhz_prepare_bufs);
-		break;
-	case VA1J5JF8007S_25MHZ:
-		bufs = va1j5jf8007s_25mhz_prepare_bufs;
-		size = ARRAY_SIZE(va1j5jf8007s_25mhz_prepare_bufs);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	addr = state->config->demod_address;
-
-	msg.addr = addr;
-	msg.flags = 0;
-	msg.len = 2;
-	msg.buf = buf;
-	for (i = 0; i < size; i++) {
-		memcpy(buf, bufs[i], sizeof(buf));
-		if (i2c_transfer(state->adap, &msg, 1) != 1)
-			return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-/* must be called after va1j5jf8007t_attach */
-int va1j5jf8007s_prepare(struct dvb_frontend *fe)
-{
-	struct va1j5jf8007s_state *state;
-	int ret;
-
-	state = fe->demodulator_priv;
-
-	ret = va1j5jf8007s_prepare_1(state);
-	if (ret < 0)
-		return ret;
-
-	ret = va1j5jf8007s_prepare_2(state);
-	if (ret < 0)
-		return ret;
-
-	return va1j5jf8007s_init_frequency(state);
-}
-
-struct dvb_frontend *
-va1j5jf8007s_attach(const struct va1j5jf8007s_config *config,
-		    struct i2c_adapter *adap)
-{
-	struct va1j5jf8007s_state *state;
-	struct dvb_frontend *fe;
-	u8 buf[2];
-	struct i2c_msg msg;
-
-	state = kzalloc(sizeof(struct va1j5jf8007s_state), GFP_KERNEL);
-	if (!state)
-		return NULL;
-
-	state->config = config;
-	state->adap = adap;
-
-	fe = &state->fe;
-	memcpy(&fe->ops, &va1j5jf8007s_ops, sizeof(struct dvb_frontend_ops));
-	fe->demodulator_priv = state;
-
-	buf[0] = 0x01;
-	buf[1] = 0x80;
-
-	msg.addr = state->config->demod_address;
-	msg.flags = 0;
-	msg.len = sizeof(buf);
-	msg.buf = buf;
-
-	if (i2c_transfer(state->adap, &msg, 1) != 1) {
-		kfree(state);
-		return NULL;
-	}
-
-	return fe;
-}
diff --git a/drivers/media/dvb/pt1/va1j5jf8007s.h b/drivers/media/dvb/pt1/va1j5jf8007s.h
deleted file mode 100644
index b7d6f05..0000000
--- a/drivers/media/dvb/pt1/va1j5jf8007s.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * ISDB-S driver for VA1J5JF8007/VA1J5JF8011
- *
- * Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info>
- *
- * based on pt1dvr - http://pt1dvr.sourceforge.jp/
- * 	by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef VA1J5JF8007S_H
-#define VA1J5JF8007S_H
-
-enum va1j5jf8007s_frequency {
-	VA1J5JF8007S_20MHZ,
-	VA1J5JF8007S_25MHZ,
-};
-
-struct va1j5jf8007s_config {
-	u8 demod_address;
-	enum va1j5jf8007s_frequency frequency;
-};
-
-struct i2c_adapter;
-
-struct dvb_frontend *
-va1j5jf8007s_attach(const struct va1j5jf8007s_config *config,
-		    struct i2c_adapter *adap);
-
-/* must be called after va1j5jf8007t_attach */
-int va1j5jf8007s_prepare(struct dvb_frontend *fe);
-
-#endif
diff --git a/drivers/media/dvb/pt1/va1j5jf8007t.c b/drivers/media/dvb/pt1/va1j5jf8007t.c
deleted file mode 100644
index 2db15159..0000000
--- a/drivers/media/dvb/pt1/va1j5jf8007t.c
+++ /dev/null
@@ -1,536 +0,0 @@
-/*
- * ISDB-T driver for VA1J5JF8007/VA1J5JF8011
- *
- * Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info>
- *
- * based on pt1dvr - http://pt1dvr.sourceforge.jp/
- * 	by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-#include "dvb_math.h"
-#include "va1j5jf8007t.h"
-
-enum va1j5jf8007t_tune_state {
-	VA1J5JF8007T_IDLE,
-	VA1J5JF8007T_SET_FREQUENCY,
-	VA1J5JF8007T_CHECK_FREQUENCY,
-	VA1J5JF8007T_SET_MODULATION,
-	VA1J5JF8007T_CHECK_MODULATION,
-	VA1J5JF8007T_TRACK,
-	VA1J5JF8007T_ABORT,
-};
-
-struct va1j5jf8007t_state {
-	const struct va1j5jf8007t_config *config;
-	struct i2c_adapter *adap;
-	struct dvb_frontend fe;
-	enum va1j5jf8007t_tune_state tune_state;
-};
-
-static int va1j5jf8007t_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	struct va1j5jf8007t_state *state;
-	u8 addr;
-	int i;
-	u8 write_buf[1], read_buf[1];
-	struct i2c_msg msgs[2];
-	s32 word, x, y;
-
-	state = fe->demodulator_priv;
-	addr = state->config->demod_address;
-
-	word = 0;
-	for (i = 0; i < 3; i++) {
-		write_buf[0] = 0x8b + i;
-
-		msgs[0].addr = addr;
-		msgs[0].flags = 0;
-		msgs[0].len = sizeof(write_buf);
-		msgs[0].buf = write_buf;
-
-		msgs[1].addr = addr;
-		msgs[1].flags = I2C_M_RD;
-		msgs[1].len = sizeof(read_buf);
-		msgs[1].buf = read_buf;
-
-		if (i2c_transfer(state->adap, msgs, 2) != 2)
-			return -EREMOTEIO;
-
-		word <<= 8;
-		word |= read_buf[0];
-	}
-
-	if (!word)
-		return -EIO;
-
-	x = 10 * (intlog10(0x540000 * 100 / word) - (2 << 24));
-	y = (24ll << 46) / 1000000;
-	y = ((s64)y * x >> 30) - (16ll << 40) / 10000;
-	y = ((s64)y * x >> 29) + (398ll << 35) / 10000;
-	y = ((s64)y * x >> 30) + (5491ll << 29) / 10000;
-	y = ((s64)y * x >> 30) + (30965ll << 23) / 10000;
-	*snr = y >> 15;
-	return 0;
-}
-
-static int va1j5jf8007t_get_frontend_algo(struct dvb_frontend *fe)
-{
-	return DVBFE_ALGO_HW;
-}
-
-static int
-va1j5jf8007t_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct va1j5jf8007t_state *state;
-
-	state = fe->demodulator_priv;
-
-	switch (state->tune_state) {
-	case VA1J5JF8007T_IDLE:
-	case VA1J5JF8007T_SET_FREQUENCY:
-	case VA1J5JF8007T_CHECK_FREQUENCY:
-		*status = 0;
-		return 0;
-
-
-	case VA1J5JF8007T_SET_MODULATION:
-	case VA1J5JF8007T_CHECK_MODULATION:
-	case VA1J5JF8007T_ABORT:
-		*status |= FE_HAS_SIGNAL;
-		return 0;
-
-	case VA1J5JF8007T_TRACK:
-		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK;
-		return 0;
-	}
-
-	BUG();
-}
-
-struct va1j5jf8007t_cb_map {
-	u32 frequency;
-	u8 cb;
-};
-
-static const struct va1j5jf8007t_cb_map va1j5jf8007t_cb_maps[] = {
-	{  90000000, 0x80 },
-	{ 140000000, 0x81 },
-	{ 170000000, 0xa1 },
-	{ 220000000, 0x62 },
-	{ 330000000, 0xa2 },
-	{ 402000000, 0xe2 },
-	{ 450000000, 0x64 },
-	{ 550000000, 0x84 },
-	{ 600000000, 0xa4 },
-	{ 700000000, 0xc4 },
-};
-
-static u8 va1j5jf8007t_lookup_cb(u32 frequency)
-{
-	int i;
-	const struct va1j5jf8007t_cb_map *map;
-
-	for (i = 0; i < ARRAY_SIZE(va1j5jf8007t_cb_maps); i++) {
-		map = &va1j5jf8007t_cb_maps[i];
-		if (frequency < map->frequency)
-			return map->cb;
-	}
-	return 0xe4;
-}
-
-static int va1j5jf8007t_set_frequency(struct va1j5jf8007t_state *state)
-{
-	u32 frequency;
-	u16 word;
-	u8 buf[6];
-	struct i2c_msg msg;
-
-	frequency = state->fe.dtv_property_cache.frequency;
-
-	word = (frequency + 71428) / 142857 + 399;
-	buf[0] = 0xfe;
-	buf[1] = 0xc2;
-	buf[2] = word >> 8;
-	buf[3] = word;
-	buf[4] = 0x80;
-	buf[5] = va1j5jf8007t_lookup_cb(frequency);
-
-	msg.addr = state->config->demod_address;
-	msg.flags = 0;
-	msg.len = sizeof(buf);
-	msg.buf = buf;
-
-	if (i2c_transfer(state->adap, &msg, 1) != 1)
-		return -EREMOTEIO;
-
-	return 0;
-}
-
-static int
-va1j5jf8007t_check_frequency(struct va1j5jf8007t_state *state, int *lock)
-{
-	u8 addr;
-	u8 write_buf[2], read_buf[1];
-	struct i2c_msg msgs[2];
-
-	addr = state->config->demod_address;
-
-	write_buf[0] = 0xfe;
-	write_buf[1] = 0xc3;
-
-	msgs[0].addr = addr;
-	msgs[0].flags = 0;
-	msgs[0].len = sizeof(write_buf);
-	msgs[0].buf = write_buf;
-
-	msgs[1].addr = addr;
-	msgs[1].flags = I2C_M_RD;
-	msgs[1].len = sizeof(read_buf);
-	msgs[1].buf = read_buf;
-
-	if (i2c_transfer(state->adap, msgs, 2) != 2)
-		return -EREMOTEIO;
-
-	*lock = read_buf[0] & 0x40;
-	return 0;
-}
-
-static int va1j5jf8007t_set_modulation(struct va1j5jf8007t_state *state)
-{
-	u8 buf[2];
-	struct i2c_msg msg;
-
-	buf[0] = 0x01;
-	buf[1] = 0x40;
-
-	msg.addr = state->config->demod_address;
-	msg.flags = 0;
-	msg.len = sizeof(buf);
-	msg.buf = buf;
-
-	if (i2c_transfer(state->adap, &msg, 1) != 1)
-		return -EREMOTEIO;
-
-	return 0;
-}
-
-static int va1j5jf8007t_check_modulation(struct va1j5jf8007t_state *state,
-					 int *lock, int *retry)
-{
-	u8 addr;
-	u8 write_buf[1], read_buf[1];
-	struct i2c_msg msgs[2];
-
-	addr = state->config->demod_address;
-
-	write_buf[0] = 0x80;
-
-	msgs[0].addr = addr;
-	msgs[0].flags = 0;
-	msgs[0].len = sizeof(write_buf);
-	msgs[0].buf = write_buf;
-
-	msgs[1].addr = addr;
-	msgs[1].flags = I2C_M_RD;
-	msgs[1].len = sizeof(read_buf);
-	msgs[1].buf = read_buf;
-
-	if (i2c_transfer(state->adap, msgs, 2) != 2)
-		return -EREMOTEIO;
-
-	*lock = !(read_buf[0] & 0x10);
-	*retry = read_buf[0] & 0x80;
-	return 0;
-}
-
-static int
-va1j5jf8007t_tune(struct dvb_frontend *fe,
-		  bool re_tune,
-		  unsigned int mode_flags,  unsigned int *delay,
-		  fe_status_t *status)
-{
-	struct va1j5jf8007t_state *state;
-	int ret;
-	int lock = 0, retry = 0;
-
-	state = fe->demodulator_priv;
-
-	if (re_tune)
-		state->tune_state = VA1J5JF8007T_SET_FREQUENCY;
-
-	switch (state->tune_state) {
-	case VA1J5JF8007T_IDLE:
-		*delay = 3 * HZ;
-		*status = 0;
-		return 0;
-
-	case VA1J5JF8007T_SET_FREQUENCY:
-		ret = va1j5jf8007t_set_frequency(state);
-		if (ret < 0)
-			return ret;
-
-		state->tune_state = VA1J5JF8007T_CHECK_FREQUENCY;
-		*delay = 0;
-		*status = 0;
-		return 0;
-
-	case VA1J5JF8007T_CHECK_FREQUENCY:
-		ret = va1j5jf8007t_check_frequency(state, &lock);
-		if (ret < 0)
-			return ret;
-
-		if (!lock)  {
-			*delay = (HZ + 999) / 1000;
-			*status = 0;
-			return 0;
-		}
-
-		state->tune_state = VA1J5JF8007T_SET_MODULATION;
-		*delay = 0;
-		*status = FE_HAS_SIGNAL;
-		return 0;
-
-	case VA1J5JF8007T_SET_MODULATION:
-		ret = va1j5jf8007t_set_modulation(state);
-		if (ret < 0)
-			return ret;
-
-		state->tune_state = VA1J5JF8007T_CHECK_MODULATION;
-		*delay = 0;
-		*status = FE_HAS_SIGNAL;
-		return 0;
-
-	case VA1J5JF8007T_CHECK_MODULATION:
-		ret = va1j5jf8007t_check_modulation(state, &lock, &retry);
-		if (ret < 0)
-			return ret;
-
-		if (!lock)  {
-			if (!retry)  {
-				state->tune_state = VA1J5JF8007T_ABORT;
-				*delay = 3 * HZ;
-				*status = FE_HAS_SIGNAL;
-				return 0;
-			}
-			*delay = (HZ + 999) / 1000;
-			*status = FE_HAS_SIGNAL;
-			return 0;
-		}
-
-		state->tune_state = VA1J5JF8007T_TRACK;
-		/* fall through */
-
-	case VA1J5JF8007T_TRACK:
-		*delay = 3 * HZ;
-		*status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK;
-		return 0;
-
-	case VA1J5JF8007T_ABORT:
-		*delay = 3 * HZ;
-		*status = FE_HAS_SIGNAL;
-		return 0;
-	}
-
-	BUG();
-}
-
-static int va1j5jf8007t_init_frequency(struct va1j5jf8007t_state *state)
-{
-	u8 buf[7];
-	struct i2c_msg msg;
-
-	buf[0] = 0xfe;
-	buf[1] = 0xc2;
-	buf[2] = 0x01;
-	buf[3] = 0x8f;
-	buf[4] = 0xc1;
-	buf[5] = 0x80;
-	buf[6] = 0x80;
-
-	msg.addr = state->config->demod_address;
-	msg.flags = 0;
-	msg.len = sizeof(buf);
-	msg.buf = buf;
-
-	if (i2c_transfer(state->adap, &msg, 1) != 1)
-		return -EREMOTEIO;
-
-	return 0;
-}
-
-static int va1j5jf8007t_set_sleep(struct va1j5jf8007t_state *state, int sleep)
-{
-	u8 buf[2];
-	struct i2c_msg msg;
-
-	buf[0] = 0x03;
-	buf[1] = sleep ? 0x90 : 0x80;
-
-	msg.addr = state->config->demod_address;
-	msg.flags = 0;
-	msg.len = sizeof(buf);
-	msg.buf = buf;
-
-	if (i2c_transfer(state->adap, &msg, 1) != 1)
-		return -EREMOTEIO;
-
-	return 0;
-}
-
-static int va1j5jf8007t_sleep(struct dvb_frontend *fe)
-{
-	struct va1j5jf8007t_state *state;
-	int ret;
-
-	state = fe->demodulator_priv;
-
-	ret = va1j5jf8007t_init_frequency(state);
-	if (ret < 0)
-		return ret;
-
-	return va1j5jf8007t_set_sleep(state, 1);
-}
-
-static int va1j5jf8007t_init(struct dvb_frontend *fe)
-{
-	struct va1j5jf8007t_state *state;
-
-	state = fe->demodulator_priv;
-	state->tune_state = VA1J5JF8007T_IDLE;
-
-	return va1j5jf8007t_set_sleep(state, 0);
-}
-
-static void va1j5jf8007t_release(struct dvb_frontend *fe)
-{
-	struct va1j5jf8007t_state *state;
-	state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops va1j5jf8007t_ops = {
-	.delsys = { SYS_ISDBT },
-	.info = {
-		.name = "VA1J5JF8007/VA1J5JF8011 ISDB-T",
-		.frequency_min = 90000000,
-		.frequency_max = 770000000,
-		.frequency_stepsize = 142857,
-		.caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_AUTO |
-			FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO |
-			FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO,
-	},
-
-	.read_snr = va1j5jf8007t_read_snr,
-	.get_frontend_algo = va1j5jf8007t_get_frontend_algo,
-	.read_status = va1j5jf8007t_read_status,
-	.tune = va1j5jf8007t_tune,
-	.sleep = va1j5jf8007t_sleep,
-	.init = va1j5jf8007t_init,
-	.release = va1j5jf8007t_release,
-};
-
-static const u8 va1j5jf8007t_20mhz_prepare_bufs[][2] = {
-	{0x03, 0x90}, {0x14, 0x8f}, {0x1c, 0x2a}, {0x1d, 0xa8}, {0x1e, 0xa2},
-	{0x22, 0x83}, {0x31, 0x0d}, {0x32, 0xe0}, {0x39, 0xd3}, {0x3a, 0x00},
-	{0x5c, 0x40}, {0x5f, 0x80}, {0x75, 0x02}, {0x76, 0x4e}, {0x77, 0x03},
-	{0xef, 0x01}
-};
-
-static const u8 va1j5jf8007t_25mhz_prepare_bufs[][2] = {
-	{0x03, 0x90}, {0x1c, 0x2a}, {0x1d, 0xa8}, {0x1e, 0xa2}, {0x22, 0x83},
-	{0x3a, 0x00}, {0x5c, 0x40}, {0x5f, 0x80}, {0x75, 0x0a}, {0x76, 0x4c},
-	{0x77, 0x03}, {0xef, 0x01}
-};
-
-int va1j5jf8007t_prepare(struct dvb_frontend *fe)
-{
-	struct va1j5jf8007t_state *state;
-	const u8 (*bufs)[2];
-	int size;
-	u8 buf[2];
-	struct i2c_msg msg;
-	int i;
-
-	state = fe->demodulator_priv;
-
-	switch (state->config->frequency) {
-	case VA1J5JF8007T_20MHZ:
-		bufs = va1j5jf8007t_20mhz_prepare_bufs;
-		size = ARRAY_SIZE(va1j5jf8007t_20mhz_prepare_bufs);
-		break;
-	case VA1J5JF8007T_25MHZ:
-		bufs = va1j5jf8007t_25mhz_prepare_bufs;
-		size = ARRAY_SIZE(va1j5jf8007t_25mhz_prepare_bufs);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	msg.addr = state->config->demod_address;
-	msg.flags = 0;
-	msg.len = sizeof(buf);
-	msg.buf = buf;
-
-	for (i = 0; i < size; i++) {
-		memcpy(buf, bufs[i], sizeof(buf));
-		if (i2c_transfer(state->adap, &msg, 1) != 1)
-			return -EREMOTEIO;
-	}
-
-	return va1j5jf8007t_init_frequency(state);
-}
-
-struct dvb_frontend *
-va1j5jf8007t_attach(const struct va1j5jf8007t_config *config,
-		    struct i2c_adapter *adap)
-{
-	struct va1j5jf8007t_state *state;
-	struct dvb_frontend *fe;
-	u8 buf[2];
-	struct i2c_msg msg;
-
-	state = kzalloc(sizeof(struct va1j5jf8007t_state), GFP_KERNEL);
-	if (!state)
-		return NULL;
-
-	state->config = config;
-	state->adap = adap;
-
-	fe = &state->fe;
-	memcpy(&fe->ops, &va1j5jf8007t_ops, sizeof(struct dvb_frontend_ops));
-	fe->demodulator_priv = state;
-
-	buf[0] = 0x01;
-	buf[1] = 0x80;
-
-	msg.addr = state->config->demod_address;
-	msg.flags = 0;
-	msg.len = sizeof(buf);
-	msg.buf = buf;
-
-	if (i2c_transfer(state->adap, &msg, 1) != 1) {
-		kfree(state);
-		return NULL;
-	}
-
-	return fe;
-}
diff --git a/drivers/media/dvb/pt1/va1j5jf8007t.h b/drivers/media/dvb/pt1/va1j5jf8007t.h
deleted file mode 100644
index 2903be5..0000000
--- a/drivers/media/dvb/pt1/va1j5jf8007t.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * ISDB-T driver for VA1J5JF8007/VA1J5JF8011
- *
- * Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info>
- *
- * based on pt1dvr - http://pt1dvr.sourceforge.jp/
- * 	by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef VA1J5JF8007T_H
-#define VA1J5JF8007T_H
-
-enum va1j5jf8007t_frequency {
-	VA1J5JF8007T_20MHZ,
-	VA1J5JF8007T_25MHZ,
-};
-
-struct va1j5jf8007t_config {
-	u8 demod_address;
-	enum va1j5jf8007t_frequency frequency;
-};
-
-struct i2c_adapter;
-
-struct dvb_frontend *
-va1j5jf8007t_attach(const struct va1j5jf8007t_config *config,
-		    struct i2c_adapter *adap);
-
-/* must be called after va1j5jf8007s_attach */
-int va1j5jf8007t_prepare(struct dvb_frontend *fe);
-
-#endif
diff --git a/drivers/media/dvb/siano/Kconfig b/drivers/media/dvb/siano/Kconfig
deleted file mode 100644
index bc6456e..0000000
--- a/drivers/media/dvb/siano/Kconfig
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# Siano Mobile Silicon Digital TV device configuration
-#
-
-config SMS_SIANO_MDTV
-	tristate "Siano SMS1xxx based MDTV receiver"
-	depends on DVB_CORE && RC_CORE && HAS_DMA
-	---help---
-	  Choose Y or M here if you have MDTV receiver with a Siano chipset.
-
-	  To compile this driver as a module, choose M here
-	  (The module will be called smsmdtv).
-
-	  Further documentation on this driver can be found on the WWW
-	  at http://www.siano-ms.com/
-
-if SMS_SIANO_MDTV
-menu "Siano module components"
-
-# Hardware interfaces support
-
-config SMS_USB_DRV
-	tristate "USB interface support"
-	depends on DVB_CORE && USB
-	---help---
-	  Choose if you would like to have Siano's support for USB interface
-
-config SMS_SDIO_DRV
-	tristate "SDIO interface support"
-	depends on DVB_CORE && MMC
-	---help---
-	  Choose if you would like to have Siano's support for SDIO interface
-endmenu
-endif # SMS_SIANO_MDTV
diff --git a/drivers/media/dvb/siano/Makefile b/drivers/media/dvb/siano/Makefile
deleted file mode 100644
index f233b57..0000000
--- a/drivers/media/dvb/siano/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-
-smsmdtv-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o
-
-obj-$(CONFIG_SMS_SIANO_MDTV) += smsmdtv.o smsdvb.o
-obj-$(CONFIG_SMS_USB_DRV) += smsusb.o
-obj-$(CONFIG_SMS_SDIO_DRV) += smssdio.o
-
-ccflags-y += -Idrivers/media/dvb/dvb-core
-
-ccflags-y += $(extra-cflags-y) $(extra-cflags-m)
-
diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c
deleted file mode 100644
index 680c781..0000000
--- a/drivers/media/dvb/siano/sms-cards.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- *  Card-specific functions for the Siano SMS1xxx USB dongle
- *
- *  Copyright (c) 2008 Michael Krufky <mkrufky@linuxtv.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation;
- *
- *  Software distributed under the License is distributed on an "AS IS"
- *  basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
- *
- *  See the GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "sms-cards.h"
-#include "smsir.h"
-#include <linux/module.h>
-
-static int sms_dbg;
-module_param_named(cards_dbg, sms_dbg, int, 0644);
-MODULE_PARM_DESC(cards_dbg, "set debug level (info=1, adv=2 (or-able))");
-
-static struct sms_board sms_boards[] = {
-	[SMS_BOARD_UNKNOWN] = {
-		.name	= "Unknown board",
-	},
-	[SMS1XXX_BOARD_SIANO_STELLAR] = {
-		.name	= "Siano Stellar Digital Receiver",
-		.type	= SMS_STELLAR,
-	},
-	[SMS1XXX_BOARD_SIANO_NOVA_A] = {
-		.name	= "Siano Nova A Digital Receiver",
-		.type	= SMS_NOVA_A0,
-	},
-	[SMS1XXX_BOARD_SIANO_NOVA_B] = {
-		.name	= "Siano Nova B Digital Receiver",
-		.type	= SMS_NOVA_B0,
-	},
-	[SMS1XXX_BOARD_SIANO_VEGA] = {
-		.name	= "Siano Vega Digital Receiver",
-		.type	= SMS_VEGA,
-	},
-	[SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT] = {
-		.name	= "Hauppauge Catamount",
-		.type	= SMS_STELLAR,
-		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-stellar-dvbt-01.fw",
-	},
-	[SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A] = {
-		.name	= "Hauppauge Okemo-A",
-		.type	= SMS_NOVA_A0,
-		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-a-dvbt-01.fw",
-	},
-	[SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B] = {
-		.name	= "Hauppauge Okemo-B",
-		.type	= SMS_NOVA_B0,
-		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-b-dvbt-01.fw",
-	},
-	[SMS1XXX_BOARD_HAUPPAUGE_WINDHAM] = {
-		.name	= "Hauppauge WinTV MiniStick",
-		.type	= SMS_NOVA_B0,
-		.fw[DEVICE_MODE_ISDBT_BDA] = "sms1xxx-hcw-55xxx-isdbt-02.fw",
-		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
-		.rc_codes = RC_MAP_HAUPPAUGE,
-		.board_cfg.leds_power = 26,
-		.board_cfg.led0 = 27,
-		.board_cfg.led1 = 28,
-		.board_cfg.ir = 9,
-		.led_power = 26,
-		.led_lo    = 27,
-		.led_hi    = 28,
-	},
-	[SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD] = {
-		.name	= "Hauppauge WinTV MiniCard",
-		.type	= SMS_NOVA_B0,
-		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
-		.lna_ctrl  = 29,
-		.board_cfg.foreign_lna0_ctrl = 29,
-		.rf_switch = 17,
-		.board_cfg.rf_switch_uhf = 17,
-	},
-	[SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2] = {
-		.name	= "Hauppauge WinTV MiniCard",
-		.type	= SMS_NOVA_B0,
-		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
-		.lna_ctrl  = -1,
-	},
-	[SMS1XXX_BOARD_SIANO_NICE] = {
-	/* 11 */
-		.name = "Siano Nice Digital Receiver",
-		.type = SMS_NOVA_B0,
-	},
-	[SMS1XXX_BOARD_SIANO_VENICE] = {
-	/* 12 */
-		.name = "Siano Venice Digital Receiver",
-		.type = SMS_VEGA,
-	},
-};
-
-struct sms_board *sms_get_board(unsigned id)
-{
-	BUG_ON(id >= ARRAY_SIZE(sms_boards));
-
-	return &sms_boards[id];
-}
-EXPORT_SYMBOL_GPL(sms_get_board);
-static inline void sms_gpio_assign_11xx_default_led_config(
-		struct smscore_gpio_config *pGpioConfig) {
-	pGpioConfig->Direction = SMS_GPIO_DIRECTION_OUTPUT;
-	pGpioConfig->InputCharacteristics =
-		SMS_GPIO_INPUT_CHARACTERISTICS_NORMAL;
-	pGpioConfig->OutputDriving = SMS_GPIO_OUTPUT_DRIVING_4mA;
-	pGpioConfig->OutputSlewRate = SMS_GPIO_OUTPUT_SLEW_RATE_0_45_V_NS;
-	pGpioConfig->PullUpDown = SMS_GPIO_PULL_UP_DOWN_NONE;
-}
-
-int sms_board_event(struct smscore_device_t *coredev,
-		enum SMS_BOARD_EVENTS gevent) {
-	struct smscore_gpio_config MyGpioConfig;
-
-	sms_gpio_assign_11xx_default_led_config(&MyGpioConfig);
-
-	switch (gevent) {
-	case BOARD_EVENT_POWER_INIT: /* including hotplug */
-		break; /* BOARD_EVENT_BIND */
-
-	case BOARD_EVENT_POWER_SUSPEND:
-		break; /* BOARD_EVENT_POWER_SUSPEND */
-
-	case BOARD_EVENT_POWER_RESUME:
-		break; /* BOARD_EVENT_POWER_RESUME */
-
-	case BOARD_EVENT_BIND:
-		break; /* BOARD_EVENT_BIND */
-
-	case BOARD_EVENT_SCAN_PROG:
-		break; /* BOARD_EVENT_SCAN_PROG */
-	case BOARD_EVENT_SCAN_COMP:
-		break; /* BOARD_EVENT_SCAN_COMP */
-	case BOARD_EVENT_EMERGENCY_WARNING_SIGNAL:
-		break; /* BOARD_EVENT_EMERGENCY_WARNING_SIGNAL */
-	case BOARD_EVENT_FE_LOCK:
-		break; /* BOARD_EVENT_FE_LOCK */
-	case BOARD_EVENT_FE_UNLOCK:
-		break; /* BOARD_EVENT_FE_UNLOCK */
-	case BOARD_EVENT_DEMOD_LOCK:
-		break; /* BOARD_EVENT_DEMOD_LOCK */
-	case BOARD_EVENT_DEMOD_UNLOCK:
-		break; /* BOARD_EVENT_DEMOD_UNLOCK */
-	case BOARD_EVENT_RECEPTION_MAX_4:
-		break; /* BOARD_EVENT_RECEPTION_MAX_4 */
-	case BOARD_EVENT_RECEPTION_3:
-		break; /* BOARD_EVENT_RECEPTION_3 */
-	case BOARD_EVENT_RECEPTION_2:
-		break; /* BOARD_EVENT_RECEPTION_2 */
-	case BOARD_EVENT_RECEPTION_1:
-		break; /* BOARD_EVENT_RECEPTION_1 */
-	case BOARD_EVENT_RECEPTION_LOST_0:
-		break; /* BOARD_EVENT_RECEPTION_LOST_0 */
-	case BOARD_EVENT_MULTIPLEX_OK:
-		break; /* BOARD_EVENT_MULTIPLEX_OK */
-	case BOARD_EVENT_MULTIPLEX_ERRORS:
-		break; /* BOARD_EVENT_MULTIPLEX_ERRORS */
-
-	default:
-		sms_err("Unknown SMS board event");
-		break;
-	}
-	return 0;
-}
-EXPORT_SYMBOL_GPL(sms_board_event);
-
-static int sms_set_gpio(struct smscore_device_t *coredev, int pin, int enable)
-{
-	int lvl, ret;
-	u32 gpio;
-	struct smscore_config_gpio gpioconfig = {
-		.direction            = SMS_GPIO_DIRECTION_OUTPUT,
-		.pullupdown           = SMS_GPIO_PULLUPDOWN_NONE,
-		.inputcharacteristics = SMS_GPIO_INPUTCHARACTERISTICS_NORMAL,
-		.outputslewrate       = SMS_GPIO_OUTPUTSLEWRATE_FAST,
-		.outputdriving        = SMS_GPIO_OUTPUTDRIVING_4mA,
-	};
-
-	if (pin == 0)
-		return -EINVAL;
-
-	if (pin < 0) {
-		/* inverted gpio */
-		gpio = pin * -1;
-		lvl = enable ? 0 : 1;
-	} else {
-		gpio = pin;
-		lvl = enable ? 1 : 0;
-	}
-
-	ret = smscore_configure_gpio(coredev, gpio, &gpioconfig);
-	if (ret < 0)
-		return ret;
-
-	return smscore_set_gpio(coredev, gpio, lvl);
-}
-
-int sms_board_setup(struct smscore_device_t *coredev)
-{
-	int board_id = smscore_get_board_id(coredev);
-	struct sms_board *board = sms_get_board(board_id);
-
-	switch (board_id) {
-	case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
-		/* turn off all LEDs */
-		sms_set_gpio(coredev, board->led_power, 0);
-		sms_set_gpio(coredev, board->led_hi, 0);
-		sms_set_gpio(coredev, board->led_lo, 0);
-		break;
-	case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
-	case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
-		/* turn off LNA */
-		sms_set_gpio(coredev, board->lna_ctrl, 0);
-		break;
-	}
-	return 0;
-}
-EXPORT_SYMBOL_GPL(sms_board_setup);
-
-int sms_board_power(struct smscore_device_t *coredev, int onoff)
-{
-	int board_id = smscore_get_board_id(coredev);
-	struct sms_board *board = sms_get_board(board_id);
-
-	switch (board_id) {
-	case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
-		/* power LED */
-		sms_set_gpio(coredev,
-			     board->led_power, onoff ? 1 : 0);
-		break;
-	case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
-	case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
-		/* LNA */
-		if (!onoff)
-			sms_set_gpio(coredev, board->lna_ctrl, 0);
-		break;
-	}
-	return 0;
-}
-EXPORT_SYMBOL_GPL(sms_board_power);
-
-int sms_board_led_feedback(struct smscore_device_t *coredev, int led)
-{
-	int board_id = smscore_get_board_id(coredev);
-	struct sms_board *board = sms_get_board(board_id);
-
-	/* dont touch GPIO if LEDs are already set */
-	if (smscore_led_state(coredev, -1) == led)
-		return 0;
-
-	switch (board_id) {
-	case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
-		sms_set_gpio(coredev,
-			     board->led_lo, (led & SMS_LED_LO) ? 1 : 0);
-		sms_set_gpio(coredev,
-			     board->led_hi, (led & SMS_LED_HI) ? 1 : 0);
-
-		smscore_led_state(coredev, led);
-		break;
-	}
-	return 0;
-}
-EXPORT_SYMBOL_GPL(sms_board_led_feedback);
-
-int sms_board_lna_control(struct smscore_device_t *coredev, int onoff)
-{
-	int board_id = smscore_get_board_id(coredev);
-	struct sms_board *board = sms_get_board(board_id);
-
-	sms_debug("%s: LNA %s", __func__, onoff ? "enabled" : "disabled");
-
-	switch (board_id) {
-	case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
-	case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
-		sms_set_gpio(coredev,
-			     board->rf_switch, onoff ? 1 : 0);
-		return sms_set_gpio(coredev,
-				    board->lna_ctrl, onoff ? 1 : 0);
-	}
-	return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(sms_board_lna_control);
-
-int sms_board_load_modules(int id)
-{
-	switch (id) {
-	case SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT:
-	case SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A:
-	case SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B:
-	case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
-	case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
-	case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
-		request_module("smsdvb");
-		break;
-	default:
-		/* do nothing */
-		break;
-	}
-	return 0;
-}
-EXPORT_SYMBOL_GPL(sms_board_load_modules);
diff --git a/drivers/media/dvb/siano/sms-cards.h b/drivers/media/dvb/siano/sms-cards.h
deleted file mode 100644
index d8cdf75..0000000
--- a/drivers/media/dvb/siano/sms-cards.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- *  Card-specific functions for the Siano SMS1xxx USB dongle
- *
- *  Copyright (c) 2008 Michael Krufky <mkrufky@linuxtv.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation;
- *
- *  Software distributed under the License is distributed on an "AS IS"
- *  basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
- *
- *  See the GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __SMS_CARDS_H__
-#define __SMS_CARDS_H__
-
-#include <linux/usb.h>
-#include "smscoreapi.h"
-#include "smsir.h"
-
-#define SMS_BOARD_UNKNOWN 0
-#define SMS1XXX_BOARD_SIANO_STELLAR 1
-#define SMS1XXX_BOARD_SIANO_NOVA_A  2
-#define SMS1XXX_BOARD_SIANO_NOVA_B  3
-#define SMS1XXX_BOARD_SIANO_VEGA    4
-#define SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT 5
-#define SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A 6
-#define SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B 7
-#define SMS1XXX_BOARD_HAUPPAUGE_WINDHAM 8
-#define SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD 9
-#define SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2 10
-#define SMS1XXX_BOARD_SIANO_NICE	11
-#define SMS1XXX_BOARD_SIANO_VENICE	12
-
-struct sms_board_gpio_cfg {
-	int lna_vhf_exist;
-	int lna_vhf_ctrl;
-	int lna_uhf_exist;
-	int lna_uhf_ctrl;
-	int lna_uhf_d_ctrl;
-	int lna_sband_exist;
-	int lna_sband_ctrl;
-	int lna_sband_d_ctrl;
-	int foreign_lna0_ctrl;
-	int foreign_lna1_ctrl;
-	int foreign_lna2_ctrl;
-	int rf_switch_vhf;
-	int rf_switch_uhf;
-	int rf_switch_sband;
-	int leds_power;
-	int led0;
-	int led1;
-	int led2;
-	int led3;
-	int led4;
-	int ir;
-	int eeprom_wp;
-	int mrc_sense;
-	int mrc_pdn_resetn;
-	int mrc_gp0; /* mrcs spi int */
-	int mrc_gp1;
-	int mrc_gp2;
-	int mrc_gp3;
-	int mrc_gp4;
-	int host_spi_gsp_ts_int;
-};
-
-struct sms_board {
-	enum sms_device_type_st type;
-	char *name, *fw[DEVICE_MODE_MAX];
-	struct sms_board_gpio_cfg board_cfg;
-	char *rc_codes;				/* Name of IR codes table */
-
-	/* gpios */
-	int led_power, led_hi, led_lo, lna_ctrl, rf_switch;
-};
-
-struct sms_board *sms_get_board(unsigned id);
-
-extern struct smscore_device_t *coredev;
-
-enum SMS_BOARD_EVENTS {
-	BOARD_EVENT_POWER_INIT,
-	BOARD_EVENT_POWER_SUSPEND,
-	BOARD_EVENT_POWER_RESUME,
-	BOARD_EVENT_BIND,
-	BOARD_EVENT_SCAN_PROG,
-	BOARD_EVENT_SCAN_COMP,
-	BOARD_EVENT_EMERGENCY_WARNING_SIGNAL,
-	BOARD_EVENT_FE_LOCK,
-	BOARD_EVENT_FE_UNLOCK,
-	BOARD_EVENT_DEMOD_LOCK,
-	BOARD_EVENT_DEMOD_UNLOCK,
-	BOARD_EVENT_RECEPTION_MAX_4,
-	BOARD_EVENT_RECEPTION_3,
-	BOARD_EVENT_RECEPTION_2,
-	BOARD_EVENT_RECEPTION_1,
-	BOARD_EVENT_RECEPTION_LOST_0,
-	BOARD_EVENT_MULTIPLEX_OK,
-	BOARD_EVENT_MULTIPLEX_ERRORS
-};
-
-int sms_board_event(struct smscore_device_t *coredev,
-		enum SMS_BOARD_EVENTS gevent);
-
-int sms_board_setup(struct smscore_device_t *coredev);
-
-#define SMS_LED_OFF 0
-#define SMS_LED_LO  1
-#define SMS_LED_HI  2
-int sms_board_led_feedback(struct smscore_device_t *coredev, int led);
-int sms_board_power(struct smscore_device_t *coredev, int onoff);
-int sms_board_lna_control(struct smscore_device_t *coredev, int onoff);
-
-extern int sms_board_load_modules(int id);
-
-#endif /* __SMS_CARDS_H__ */
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
deleted file mode 100644
index 9cc5554..0000000
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ /dev/null
@@ -1,1637 +0,0 @@
-/*
- *  Siano core API module
- *
- *  This file contains implementation for the interface to sms core component
- *
- *  author: Uri Shkolnik
- *
- *  Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation;
- *
- *  Software distributed under the License is distributed on an "AS IS"
- *  basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
- *
- *  See the GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <linux/firmware.h>
-#include <linux/wait.h>
-#include <asm/byteorder.h>
-
-#include "smscoreapi.h"
-#include "sms-cards.h"
-#include "smsir.h"
-#include "smsendian.h"
-
-static int sms_dbg;
-module_param_named(debug, sms_dbg, int, 0644);
-MODULE_PARM_DESC(debug, "set debug level (info=1, adv=2 (or-able))");
-
-struct smscore_device_notifyee_t {
-	struct list_head entry;
-	hotplug_t hotplug;
-};
-
-struct smscore_idlist_t {
-	struct list_head entry;
-	int		id;
-	int		data_type;
-};
-
-struct smscore_client_t {
-	struct list_head entry;
-	struct smscore_device_t *coredev;
-	void			*context;
-	struct list_head 	idlist;
-	onresponse_t	onresponse_handler;
-	onremove_t		onremove_handler;
-};
-
-void smscore_set_board_id(struct smscore_device_t *core, int id)
-{
-	core->board_id = id;
-}
-
-int smscore_led_state(struct smscore_device_t *core, int led)
-{
-	if (led >= 0)
-		core->led_state = led;
-	return core->led_state;
-}
-EXPORT_SYMBOL_GPL(smscore_set_board_id);
-
-int smscore_get_board_id(struct smscore_device_t *core)
-{
-	return core->board_id;
-}
-EXPORT_SYMBOL_GPL(smscore_get_board_id);
-
-struct smscore_registry_entry_t {
-	struct list_head entry;
-	char			devpath[32];
-	int				mode;
-	enum sms_device_type_st	type;
-};
-
-static struct list_head g_smscore_notifyees;
-static struct list_head g_smscore_devices;
-static struct mutex g_smscore_deviceslock;
-
-static struct list_head g_smscore_registry;
-static struct mutex g_smscore_registrylock;
-
-static int default_mode = 4;
-
-module_param(default_mode, int, 0644);
-MODULE_PARM_DESC(default_mode, "default firmware id (device mode)");
-
-static struct smscore_registry_entry_t *smscore_find_registry(char *devpath)
-{
-	struct smscore_registry_entry_t *entry;
-	struct list_head *next;
-
-	kmutex_lock(&g_smscore_registrylock);
-	for (next = g_smscore_registry.next;
-	     next != &g_smscore_registry;
-	     next = next->next) {
-		entry = (struct smscore_registry_entry_t *) next;
-		if (!strcmp(entry->devpath, devpath)) {
-			kmutex_unlock(&g_smscore_registrylock);
-			return entry;
-		}
-	}
-	entry = kmalloc(sizeof(struct smscore_registry_entry_t), GFP_KERNEL);
-	if (entry) {
-		entry->mode = default_mode;
-		strcpy(entry->devpath, devpath);
-		list_add(&entry->entry, &g_smscore_registry);
-	} else
-		sms_err("failed to create smscore_registry.");
-	kmutex_unlock(&g_smscore_registrylock);
-	return entry;
-}
-
-int smscore_registry_getmode(char *devpath)
-{
-	struct smscore_registry_entry_t *entry;
-
-	entry = smscore_find_registry(devpath);
-	if (entry)
-		return entry->mode;
-	else
-		sms_err("No registry found.");
-
-	return default_mode;
-}
-EXPORT_SYMBOL_GPL(smscore_registry_getmode);
-
-static enum sms_device_type_st smscore_registry_gettype(char *devpath)
-{
-	struct smscore_registry_entry_t *entry;
-
-	entry = smscore_find_registry(devpath);
-	if (entry)
-		return entry->type;
-	else
-		sms_err("No registry found.");
-
-	return -1;
-}
-
-void smscore_registry_setmode(char *devpath, int mode)
-{
-	struct smscore_registry_entry_t *entry;
-
-	entry = smscore_find_registry(devpath);
-	if (entry)
-		entry->mode = mode;
-	else
-		sms_err("No registry found.");
-}
-
-static void smscore_registry_settype(char *devpath,
-				     enum sms_device_type_st type)
-{
-	struct smscore_registry_entry_t *entry;
-
-	entry = smscore_find_registry(devpath);
-	if (entry)
-		entry->type = type;
-	else
-		sms_err("No registry found.");
-}
-
-
-static void list_add_locked(struct list_head *new, struct list_head *head,
-			    spinlock_t *lock)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(lock, flags);
-
-	list_add(new, head);
-
-	spin_unlock_irqrestore(lock, flags);
-}
-
-/**
- * register a client callback that called when device plugged in/unplugged
- * NOTE: if devices exist callback is called immediately for each device
- *
- * @param hotplug callback
- *
- * @return 0 on success, <0 on error.
- */
-int smscore_register_hotplug(hotplug_t hotplug)
-{
-	struct smscore_device_notifyee_t *notifyee;
-	struct list_head *next, *first;
-	int rc = 0;
-
-	kmutex_lock(&g_smscore_deviceslock);
-
-	notifyee = kmalloc(sizeof(struct smscore_device_notifyee_t),
-			   GFP_KERNEL);
-	if (notifyee) {
-		/* now notify callback about existing devices */
-		first = &g_smscore_devices;
-		for (next = first->next;
-		     next != first && !rc;
-		     next = next->next) {
-			struct smscore_device_t *coredev =
-				(struct smscore_device_t *) next;
-			rc = hotplug(coredev, coredev->device, 1);
-		}
-
-		if (rc >= 0) {
-			notifyee->hotplug = hotplug;
-			list_add(&notifyee->entry, &g_smscore_notifyees);
-		} else
-			kfree(notifyee);
-	} else
-		rc = -ENOMEM;
-
-	kmutex_unlock(&g_smscore_deviceslock);
-
-	return rc;
-}
-EXPORT_SYMBOL_GPL(smscore_register_hotplug);
-
-/**
- * unregister a client callback that called when device plugged in/unplugged
- *
- * @param hotplug callback
- *
- */
-void smscore_unregister_hotplug(hotplug_t hotplug)
-{
-	struct list_head *next, *first;
-
-	kmutex_lock(&g_smscore_deviceslock);
-
-	first = &g_smscore_notifyees;
-
-	for (next = first->next; next != first;) {
-		struct smscore_device_notifyee_t *notifyee =
-			(struct smscore_device_notifyee_t *) next;
-		next = next->next;
-
-		if (notifyee->hotplug == hotplug) {
-			list_del(&notifyee->entry);
-			kfree(notifyee);
-		}
-	}
-
-	kmutex_unlock(&g_smscore_deviceslock);
-}
-EXPORT_SYMBOL_GPL(smscore_unregister_hotplug);
-
-static void smscore_notify_clients(struct smscore_device_t *coredev)
-{
-	struct smscore_client_t *client;
-
-	/* the client must call smscore_unregister_client from remove handler */
-	while (!list_empty(&coredev->clients)) {
-		client = (struct smscore_client_t *) coredev->clients.next;
-		client->onremove_handler(client->context);
-	}
-}
-
-static int smscore_notify_callbacks(struct smscore_device_t *coredev,
-				    struct device *device, int arrival)
-{
-	struct smscore_device_notifyee_t *elem;
-	int rc = 0;
-
-	/* note: must be called under g_deviceslock */
-
-	list_for_each_entry(elem, &g_smscore_notifyees, entry) {
-		rc = elem->hotplug(coredev, device, arrival);
-		if (rc < 0)
-			break;
-	}
-
-	return rc;
-}
-
-static struct
-smscore_buffer_t *smscore_createbuffer(u8 *buffer, void *common_buffer,
-				       dma_addr_t common_buffer_phys)
-{
-	struct smscore_buffer_t *cb =
-		kmalloc(sizeof(struct smscore_buffer_t), GFP_KERNEL);
-	if (!cb) {
-		sms_info("kmalloc(...) failed");
-		return NULL;
-	}
-
-	cb->p = buffer;
-	cb->offset_in_common = buffer - (u8 *) common_buffer;
-	cb->phys = common_buffer_phys + cb->offset_in_common;
-
-	return cb;
-}
-
-/**
- * creates coredev object for a device, prepares buffers,
- * creates buffer mappings, notifies registered hotplugs about new device.
- *
- * @param params device pointer to struct with device specific parameters
- *               and handlers
- * @param coredev pointer to a value that receives created coredev object
- *
- * @return 0 on success, <0 on error.
- */
-int smscore_register_device(struct smsdevice_params_t *params,
-			    struct smscore_device_t **coredev)
-{
-	struct smscore_device_t *dev;
-	u8 *buffer;
-
-	dev = kzalloc(sizeof(struct smscore_device_t), GFP_KERNEL);
-	if (!dev) {
-		sms_info("kzalloc(...) failed");
-		return -ENOMEM;
-	}
-
-	/* init list entry so it could be safe in smscore_unregister_device */
-	INIT_LIST_HEAD(&dev->entry);
-
-	/* init queues */
-	INIT_LIST_HEAD(&dev->clients);
-	INIT_LIST_HEAD(&dev->buffers);
-
-	/* init locks */
-	spin_lock_init(&dev->clientslock);
-	spin_lock_init(&dev->bufferslock);
-
-	/* init completion events */
-	init_completion(&dev->version_ex_done);
-	init_completion(&dev->data_download_done);
-	init_completion(&dev->trigger_done);
-	init_completion(&dev->init_device_done);
-	init_completion(&dev->reload_start_done);
-	init_completion(&dev->resume_done);
-	init_completion(&dev->gpio_configuration_done);
-	init_completion(&dev->gpio_set_level_done);
-	init_completion(&dev->gpio_get_level_done);
-	init_completion(&dev->ir_init_done);
-
-	/* Buffer management */
-	init_waitqueue_head(&dev->buffer_mng_waitq);
-
-	/* alloc common buffer */
-	dev->common_buffer_size = params->buffer_size * params->num_buffers;
-	dev->common_buffer = dma_alloc_coherent(NULL, dev->common_buffer_size,
-						&dev->common_buffer_phys,
-						GFP_KERNEL | GFP_DMA);
-	if (!dev->common_buffer) {
-		smscore_unregister_device(dev);
-		return -ENOMEM;
-	}
-
-	/* prepare dma buffers */
-	for (buffer = dev->common_buffer;
-	     dev->num_buffers < params->num_buffers;
-	     dev->num_buffers++, buffer += params->buffer_size) {
-		struct smscore_buffer_t *cb =
-			smscore_createbuffer(buffer, dev->common_buffer,
-					     dev->common_buffer_phys);
-		if (!cb) {
-			smscore_unregister_device(dev);
-			return -ENOMEM;
-		}
-
-		smscore_putbuffer(dev, cb);
-	}
-
-	sms_info("allocated %d buffers", dev->num_buffers);
-
-	dev->mode = DEVICE_MODE_NONE;
-	dev->context = params->context;
-	dev->device = params->device;
-	dev->setmode_handler = params->setmode_handler;
-	dev->detectmode_handler = params->detectmode_handler;
-	dev->sendrequest_handler = params->sendrequest_handler;
-	dev->preload_handler = params->preload_handler;
-	dev->postload_handler = params->postload_handler;
-
-	dev->device_flags = params->flags;
-	strcpy(dev->devpath, params->devpath);
-
-	smscore_registry_settype(dev->devpath, params->device_type);
-
-	/* add device to devices list */
-	kmutex_lock(&g_smscore_deviceslock);
-	list_add(&dev->entry, &g_smscore_devices);
-	kmutex_unlock(&g_smscore_deviceslock);
-
-	*coredev = dev;
-
-	sms_info("device %p created", dev);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(smscore_register_device);
-
-
-static int smscore_sendrequest_and_wait(struct smscore_device_t *coredev,
-		void *buffer, size_t size, struct completion *completion) {
-	int rc = coredev->sendrequest_handler(coredev->context, buffer, size);
-	if (rc < 0) {
-		sms_info("sendrequest returned error %d", rc);
-		return rc;
-	}
-
-	return wait_for_completion_timeout(completion,
-			msecs_to_jiffies(SMS_PROTOCOL_MAX_RAOUNDTRIP_MS)) ?
-			0 : -ETIME;
-}
-
-/**
- * Starts & enables IR operations
- *
- * @return 0 on success, < 0 on error.
- */
-static int smscore_init_ir(struct smscore_device_t *coredev)
-{
-	int ir_io;
-	int rc;
-	void *buffer;
-
-	coredev->ir.dev = NULL;
-	ir_io = sms_get_board(smscore_get_board_id(coredev))->board_cfg.ir;
-	if (ir_io) {/* only if IR port exist we use IR sub-module */
-		sms_info("IR loading");
-		rc = sms_ir_init(coredev);
-
-		if	(rc != 0)
-			sms_err("Error initialization DTV IR sub-module");
-		else {
-			buffer = kmalloc(sizeof(struct SmsMsgData_ST2) +
-						SMS_DMA_ALIGNMENT,
-						GFP_KERNEL | GFP_DMA);
-			if (buffer) {
-				struct SmsMsgData_ST2 *msg =
-				(struct SmsMsgData_ST2 *)
-				SMS_ALIGN_ADDRESS(buffer);
-
-				SMS_INIT_MSG(&msg->xMsgHeader,
-						MSG_SMS_START_IR_REQ,
-						sizeof(struct SmsMsgData_ST2));
-				msg->msgData[0] = coredev->ir.controller;
-				msg->msgData[1] = coredev->ir.timeout;
-
-				smsendian_handle_tx_message(
-					(struct SmsMsgHdr_ST2 *)msg);
-				rc = smscore_sendrequest_and_wait(coredev, msg,
-						msg->xMsgHeader. msgLength,
-						&coredev->ir_init_done);
-
-				kfree(buffer);
-			} else
-				sms_err
-				("Sending IR initialization message failed");
-		}
-	} else
-		sms_info("IR port has not been detected");
-
-	return 0;
-}
-
-/**
- * sets initial device mode and notifies client hotplugs that device is ready
- *
- * @param coredev pointer to a coredev object returned by
- * 		  smscore_register_device
- *
- * @return 0 on success, <0 on error.
- */
-int smscore_start_device(struct smscore_device_t *coredev)
-{
-	int rc = smscore_set_device_mode(
-			coredev, smscore_registry_getmode(coredev->devpath));
-	if (rc < 0) {
-		sms_info("set device mode faile , rc %d", rc);
-		return rc;
-	}
-
-	kmutex_lock(&g_smscore_deviceslock);
-
-	rc = smscore_notify_callbacks(coredev, coredev->device, 1);
-	smscore_init_ir(coredev);
-
-	sms_info("device %p started, rc %d", coredev, rc);
-
-	kmutex_unlock(&g_smscore_deviceslock);
-
-	return rc;
-}
-EXPORT_SYMBOL_GPL(smscore_start_device);
-
-
-static int smscore_load_firmware_family2(struct smscore_device_t *coredev,
-					 void *buffer, size_t size)
-{
-	struct SmsFirmware_ST *firmware = (struct SmsFirmware_ST *) buffer;
-	struct SmsMsgHdr_ST *msg;
-	u32 mem_address;
-	u8 *payload = firmware->Payload;
-	int rc = 0;
-	firmware->StartAddress = le32_to_cpu(firmware->StartAddress);
-	firmware->Length = le32_to_cpu(firmware->Length);
-
-	mem_address = firmware->StartAddress;
-
-	sms_info("loading FW to addr 0x%x size %d",
-		 mem_address, firmware->Length);
-	if (coredev->preload_handler) {
-		rc = coredev->preload_handler(coredev->context);
-		if (rc < 0)
-			return rc;
-	}
-
-	/* PAGE_SIZE buffer shall be enough and dma aligned */
-	msg = kmalloc(PAGE_SIZE, GFP_KERNEL | GFP_DMA);
-	if (!msg)
-		return -ENOMEM;
-
-	if (coredev->mode != DEVICE_MODE_NONE) {
-		sms_debug("sending reload command.");
-		SMS_INIT_MSG(msg, MSG_SW_RELOAD_START_REQ,
-			     sizeof(struct SmsMsgHdr_ST));
-		rc = smscore_sendrequest_and_wait(coredev, msg,
-						  msg->msgLength,
-						  &coredev->reload_start_done);
-		mem_address = *(u32 *) &payload[20];
-	}
-
-	while (size && rc >= 0) {
-		struct SmsDataDownload_ST *DataMsg =
-			(struct SmsDataDownload_ST *) msg;
-		int payload_size = min((int) size, SMS_MAX_PAYLOAD_SIZE);
-
-		SMS_INIT_MSG(msg, MSG_SMS_DATA_DOWNLOAD_REQ,
-			     (u16)(sizeof(struct SmsMsgHdr_ST) +
-				      sizeof(u32) + payload_size));
-
-		DataMsg->MemAddr = mem_address;
-		memcpy(DataMsg->Payload, payload, payload_size);
-
-		if ((coredev->device_flags & SMS_ROM_NO_RESPONSE) &&
-		    (coredev->mode == DEVICE_MODE_NONE))
-			rc = coredev->sendrequest_handler(
-				coredev->context, DataMsg,
-				DataMsg->xMsgHeader.msgLength);
-		else
-			rc = smscore_sendrequest_and_wait(
-				coredev, DataMsg,
-				DataMsg->xMsgHeader.msgLength,
-				&coredev->data_download_done);
-
-		payload += payload_size;
-		size -= payload_size;
-		mem_address += payload_size;
-	}
-
-	if (rc >= 0) {
-		if (coredev->mode == DEVICE_MODE_NONE) {
-			struct SmsMsgData_ST *TriggerMsg =
-				(struct SmsMsgData_ST *) msg;
-
-			SMS_INIT_MSG(msg, MSG_SMS_SWDOWNLOAD_TRIGGER_REQ,
-				     sizeof(struct SmsMsgHdr_ST) +
-				     sizeof(u32) * 5);
-
-			TriggerMsg->msgData[0] = firmware->StartAddress;
-						/* Entry point */
-			TriggerMsg->msgData[1] = 5; /* Priority */
-			TriggerMsg->msgData[2] = 0x200; /* Stack size */
-			TriggerMsg->msgData[3] = 0; /* Parameter */
-			TriggerMsg->msgData[4] = 4; /* Task ID */
-
-			if (coredev->device_flags & SMS_ROM_NO_RESPONSE) {
-				rc = coredev->sendrequest_handler(
-					coredev->context, TriggerMsg,
-					TriggerMsg->xMsgHeader.msgLength);
-				msleep(100);
-			} else
-				rc = smscore_sendrequest_and_wait(
-					coredev, TriggerMsg,
-					TriggerMsg->xMsgHeader.msgLength,
-					&coredev->trigger_done);
-		} else {
-			SMS_INIT_MSG(msg, MSG_SW_RELOAD_EXEC_REQ,
-				     sizeof(struct SmsMsgHdr_ST));
-
-			rc = coredev->sendrequest_handler(coredev->context,
-							  msg, msg->msgLength);
-		}
-		msleep(500);
-	}
-
-	sms_debug("rc=%d, postload=%p ", rc,
-		  coredev->postload_handler);
-
-	kfree(msg);
-
-	return ((rc >= 0) && coredev->postload_handler) ?
-		coredev->postload_handler(coredev->context) :
-		rc;
-}
-
-/**
- * loads specified firmware into a buffer and calls device loadfirmware_handler
- *
- * @param coredev pointer to a coredev object returned by
- *                smscore_register_device
- * @param filename null-terminated string specifies firmware file name
- * @param loadfirmware_handler device handler that loads firmware
- *
- * @return 0 on success, <0 on error.
- */
-static int smscore_load_firmware_from_file(struct smscore_device_t *coredev,
-					   char *filename,
-					   loadfirmware_t loadfirmware_handler)
-{
-	int rc = -ENOENT;
-	const struct firmware *fw;
-	u8 *fw_buffer;
-
-	if (loadfirmware_handler == NULL && !(coredev->device_flags &
-					      SMS_DEVICE_FAMILY2))
-		return -EINVAL;
-
-	rc = request_firmware(&fw, filename, coredev->device);
-	if (rc < 0) {
-		sms_info("failed to open \"%s\"", filename);
-		return rc;
-	}
-	sms_info("read FW %s, size=%zd", filename, fw->size);
-	fw_buffer = kmalloc(ALIGN(fw->size, SMS_ALLOC_ALIGNMENT),
-			    GFP_KERNEL | GFP_DMA);
-	if (fw_buffer) {
-		memcpy(fw_buffer, fw->data, fw->size);
-
-		rc = (coredev->device_flags & SMS_DEVICE_FAMILY2) ?
-		      smscore_load_firmware_family2(coredev,
-						    fw_buffer,
-						    fw->size) :
-		      loadfirmware_handler(coredev->context,
-					   fw_buffer, fw->size);
-
-		kfree(fw_buffer);
-	} else {
-		sms_info("failed to allocate firmware buffer");
-		rc = -ENOMEM;
-	}
-
-	release_firmware(fw);
-
-	return rc;
-}
-
-/**
- * notifies all clients registered with the device, notifies hotplugs,
- * frees all buffers and coredev object
- *
- * @param coredev pointer to a coredev object returned by
- *                smscore_register_device
- *
- * @return 0 on success, <0 on error.
- */
-void smscore_unregister_device(struct smscore_device_t *coredev)
-{
-	struct smscore_buffer_t *cb;
-	int num_buffers = 0;
-	int retry = 0;
-
-	kmutex_lock(&g_smscore_deviceslock);
-
-	/* Release input device (IR) resources */
-	sms_ir_exit(coredev);
-
-	smscore_notify_clients(coredev);
-	smscore_notify_callbacks(coredev, NULL, 0);
-
-	/* at this point all buffers should be back
-	 * onresponse must no longer be called */
-
-	while (1) {
-		while (!list_empty(&coredev->buffers)) {
-			cb = (struct smscore_buffer_t *) coredev->buffers.next;
-			list_del(&cb->entry);
-			kfree(cb);
-			num_buffers++;
-		}
-		if (num_buffers == coredev->num_buffers)
-			break;
-		if (++retry > 10) {
-			sms_info("exiting although "
-				 "not all buffers released.");
-			break;
-		}
-
-		sms_info("waiting for %d buffer(s)",
-			 coredev->num_buffers - num_buffers);
-		msleep(100);
-	}
-
-	sms_info("freed %d buffers", num_buffers);
-
-	if (coredev->common_buffer)
-		dma_free_coherent(NULL, coredev->common_buffer_size,
-			coredev->common_buffer, coredev->common_buffer_phys);
-
-	if (coredev->fw_buf != NULL)
-		kfree(coredev->fw_buf);
-
-	list_del(&coredev->entry);
-	kfree(coredev);
-
-	kmutex_unlock(&g_smscore_deviceslock);
-
-	sms_info("device %p destroyed", coredev);
-}
-EXPORT_SYMBOL_GPL(smscore_unregister_device);
-
-static int smscore_detect_mode(struct smscore_device_t *coredev)
-{
-	void *buffer = kmalloc(sizeof(struct SmsMsgHdr_ST) + SMS_DMA_ALIGNMENT,
-			       GFP_KERNEL | GFP_DMA);
-	struct SmsMsgHdr_ST *msg =
-		(struct SmsMsgHdr_ST *) SMS_ALIGN_ADDRESS(buffer);
-	int rc;
-
-	if (!buffer)
-		return -ENOMEM;
-
-	SMS_INIT_MSG(msg, MSG_SMS_GET_VERSION_EX_REQ,
-		     sizeof(struct SmsMsgHdr_ST));
-
-	rc = smscore_sendrequest_and_wait(coredev, msg, msg->msgLength,
-					  &coredev->version_ex_done);
-	if (rc == -ETIME) {
-		sms_err("MSG_SMS_GET_VERSION_EX_REQ failed first try");
-
-		if (wait_for_completion_timeout(&coredev->resume_done,
-						msecs_to_jiffies(5000))) {
-			rc = smscore_sendrequest_and_wait(
-				coredev, msg, msg->msgLength,
-				&coredev->version_ex_done);
-			if (rc < 0)
-				sms_err("MSG_SMS_GET_VERSION_EX_REQ failed "
-					"second try, rc %d", rc);
-		} else
-			rc = -ETIME;
-	}
-
-	kfree(buffer);
-
-	return rc;
-}
-
-static char *smscore_fw_lkup[][SMS_NUM_OF_DEVICE_TYPES] = {
-	/*Stellar		NOVA A0		Nova B0		VEGA*/
-	/*DVBT*/
-	{"none", "dvb_nova_12mhz.inp", "dvb_nova_12mhz_b0.inp", "none"},
-	/*DVBH*/
-	{"none", "dvb_nova_12mhz.inp", "dvb_nova_12mhz_b0.inp", "none"},
-	/*TDMB*/
-	{"none", "tdmb_nova_12mhz.inp", "tdmb_nova_12mhz_b0.inp", "none"},
-	/*DABIP*/
-	{"none", "none", "none", "none"},
-	/*BDA*/
-	{"none", "dvb_nova_12mhz.inp", "dvb_nova_12mhz_b0.inp", "none"},
-	/*ISDBT*/
-	{"none", "isdbt_nova_12mhz.inp", "isdbt_nova_12mhz_b0.inp", "none"},
-	/*ISDBTBDA*/
-	{"none", "isdbt_nova_12mhz.inp", "isdbt_nova_12mhz_b0.inp", "none"},
-	/*CMMB*/
-	{"none", "none", "none", "cmmb_vega_12mhz.inp"}
-};
-
-static inline char *sms_get_fw_name(struct smscore_device_t *coredev,
-				    int mode, enum sms_device_type_st type)
-{
-	char **fw = sms_get_board(smscore_get_board_id(coredev))->fw;
-	return (fw && fw[mode]) ? fw[mode] : smscore_fw_lkup[mode][type];
-}
-
-/**
- * calls device handler to change mode of operation
- * NOTE: stellar/usb may disconnect when changing mode
- *
- * @param coredev pointer to a coredev object returned by
- *                smscore_register_device
- * @param mode requested mode of operation
- *
- * @return 0 on success, <0 on error.
- */
-int smscore_set_device_mode(struct smscore_device_t *coredev, int mode)
-{
-	void *buffer;
-	int rc = 0;
-	enum sms_device_type_st type;
-
-	sms_debug("set device mode to %d", mode);
-	if (coredev->device_flags & SMS_DEVICE_FAMILY2) {
-		if (mode < DEVICE_MODE_DVBT || mode >= DEVICE_MODE_RAW_TUNER) {
-			sms_err("invalid mode specified %d", mode);
-			return -EINVAL;
-		}
-
-		smscore_registry_setmode(coredev->devpath, mode);
-
-		if (!(coredev->device_flags & SMS_DEVICE_NOT_READY)) {
-			rc = smscore_detect_mode(coredev);
-			if (rc < 0) {
-				sms_err("mode detect failed %d", rc);
-				return rc;
-			}
-		}
-
-		if (coredev->mode == mode) {
-			sms_info("device mode %d already set", mode);
-			return 0;
-		}
-
-		if (!(coredev->modes_supported & (1 << mode))) {
-			char *fw_filename;
-
-			type = smscore_registry_gettype(coredev->devpath);
-			fw_filename = sms_get_fw_name(coredev, mode, type);
-
-			rc = smscore_load_firmware_from_file(coredev,
-							     fw_filename, NULL);
-			if (rc < 0) {
-				sms_warn("error %d loading firmware: %s, "
-					 "trying again with default firmware",
-					 rc, fw_filename);
-
-				/* try again with the default firmware */
-				fw_filename = smscore_fw_lkup[mode][type];
-				rc = smscore_load_firmware_from_file(coredev,
-							     fw_filename, NULL);
-
-				if (rc < 0) {
-					sms_warn("error %d loading "
-						 "firmware: %s", rc,
-						 fw_filename);
-					return rc;
-				}
-			}
-			sms_log("firmware download success: %s", fw_filename);
-		} else
-			sms_info("mode %d supported by running "
-				 "firmware", mode);
-
-		buffer = kmalloc(sizeof(struct SmsMsgData_ST) +
-				 SMS_DMA_ALIGNMENT, GFP_KERNEL | GFP_DMA);
-		if (buffer) {
-			struct SmsMsgData_ST *msg =
-				(struct SmsMsgData_ST *)
-					SMS_ALIGN_ADDRESS(buffer);
-
-			SMS_INIT_MSG(&msg->xMsgHeader, MSG_SMS_INIT_DEVICE_REQ,
-				     sizeof(struct SmsMsgData_ST));
-			msg->msgData[0] = mode;
-
-			rc = smscore_sendrequest_and_wait(
-				coredev, msg, msg->xMsgHeader.msgLength,
-				&coredev->init_device_done);
-
-			kfree(buffer);
-		} else {
-			sms_err("Could not allocate buffer for "
-				"init device message.");
-			rc = -ENOMEM;
-		}
-	} else {
-		if (mode < DEVICE_MODE_DVBT || mode > DEVICE_MODE_DVBT_BDA) {
-			sms_err("invalid mode specified %d", mode);
-			return -EINVAL;
-		}
-
-		smscore_registry_setmode(coredev->devpath, mode);
-
-		if (coredev->detectmode_handler)
-			coredev->detectmode_handler(coredev->context,
-						    &coredev->mode);
-
-		if (coredev->mode != mode && coredev->setmode_handler)
-			rc = coredev->setmode_handler(coredev->context, mode);
-	}
-
-	if (rc >= 0) {
-		coredev->mode = mode;
-		coredev->device_flags &= ~SMS_DEVICE_NOT_READY;
-	}
-
-	if (rc < 0)
-		sms_err("return error code %d.", rc);
-	return rc;
-}
-
-/**
- * calls device handler to get current mode of operation
- *
- * @param coredev pointer to a coredev object returned by
- *                smscore_register_device
- *
- * @return current mode
- */
-int smscore_get_device_mode(struct smscore_device_t *coredev)
-{
-	return coredev->mode;
-}
-EXPORT_SYMBOL_GPL(smscore_get_device_mode);
-
-/**
- * find client by response id & type within the clients list.
- * return client handle or NULL.
- *
- * @param coredev pointer to a coredev object returned by
- *                smscore_register_device
- * @param data_type client data type (SMS_DONT_CARE for all types)
- * @param id client id (SMS_DONT_CARE for all id)
- *
- */
-static struct
-smscore_client_t *smscore_find_client(struct smscore_device_t *coredev,
-				      int data_type, int id)
-{
-	struct list_head *first;
-	struct smscore_client_t *client;
-	unsigned long flags;
-	struct list_head *firstid;
-	struct smscore_idlist_t *client_id;
-
-	spin_lock_irqsave(&coredev->clientslock, flags);
-	first = &coredev->clients;
-	list_for_each_entry(client, first, entry) {
-		firstid = &client->idlist;
-		list_for_each_entry(client_id, firstid, entry) {
-			if ((client_id->id == id) &&
-			    (client_id->data_type == data_type ||
-			    (client_id->data_type == 0)))
-				goto found;
-		}
-	}
-	client = NULL;
-found:
-	spin_unlock_irqrestore(&coredev->clientslock, flags);
-	return client;
-}
-
-/**
- * find client by response id/type, call clients onresponse handler
- * return buffer to pool on error
- *
- * @param coredev pointer to a coredev object returned by
- *                smscore_register_device
- * @param cb pointer to response buffer descriptor
- *
- */
-void smscore_onresponse(struct smscore_device_t *coredev,
-		struct smscore_buffer_t *cb) {
-	struct SmsMsgHdr_ST *phdr = (struct SmsMsgHdr_ST *) ((u8 *) cb->p
-			+ cb->offset);
-	struct smscore_client_t *client;
-	int rc = -EBUSY;
-	static unsigned long last_sample_time; /* = 0; */
-	static int data_total; /* = 0; */
-	unsigned long time_now = jiffies_to_msecs(jiffies);
-
-	if (!last_sample_time)
-		last_sample_time = time_now;
-
-	if (time_now - last_sample_time > 10000) {
-		sms_debug("\ndata rate %d bytes/secs",
-			  (int)((data_total * 1000) /
-				(time_now - last_sample_time)));
-
-		last_sample_time = time_now;
-		data_total = 0;
-	}
-
-	data_total += cb->size;
-	/* Do we need to re-route? */
-	if ((phdr->msgType == MSG_SMS_HO_PER_SLICES_IND) ||
-			(phdr->msgType == MSG_SMS_TRANSMISSION_IND)) {
-		if (coredev->mode == DEVICE_MODE_DVBT_BDA)
-			phdr->msgDstId = DVBT_BDA_CONTROL_MSG_ID;
-	}
-
-
-	client = smscore_find_client(coredev, phdr->msgType, phdr->msgDstId);
-
-	/* If no client registered for type & id,
-	 * check for control client where type is not registered */
-	if (client)
-		rc = client->onresponse_handler(client->context, cb);
-
-	if (rc < 0) {
-		switch (phdr->msgType) {
-		case MSG_SMS_GET_VERSION_EX_RES:
-		{
-			struct SmsVersionRes_ST *ver =
-				(struct SmsVersionRes_ST *) phdr;
-			sms_debug("MSG_SMS_GET_VERSION_EX_RES "
-				  "id %d prots 0x%x ver %d.%d",
-				  ver->FirmwareId, ver->SupportedProtocols,
-				  ver->RomVersionMajor, ver->RomVersionMinor);
-
-			coredev->mode = ver->FirmwareId == 255 ?
-				DEVICE_MODE_NONE : ver->FirmwareId;
-			coredev->modes_supported = ver->SupportedProtocols;
-
-			complete(&coredev->version_ex_done);
-			break;
-		}
-		case MSG_SMS_INIT_DEVICE_RES:
-			sms_debug("MSG_SMS_INIT_DEVICE_RES");
-			complete(&coredev->init_device_done);
-			break;
-		case MSG_SW_RELOAD_START_RES:
-			sms_debug("MSG_SW_RELOAD_START_RES");
-			complete(&coredev->reload_start_done);
-			break;
-		case MSG_SMS_DATA_DOWNLOAD_RES:
-			complete(&coredev->data_download_done);
-			break;
-		case MSG_SW_RELOAD_EXEC_RES:
-			sms_debug("MSG_SW_RELOAD_EXEC_RES");
-			break;
-		case MSG_SMS_SWDOWNLOAD_TRIGGER_RES:
-			sms_debug("MSG_SMS_SWDOWNLOAD_TRIGGER_RES");
-			complete(&coredev->trigger_done);
-			break;
-		case MSG_SMS_SLEEP_RESUME_COMP_IND:
-			complete(&coredev->resume_done);
-			break;
-		case MSG_SMS_GPIO_CONFIG_EX_RES:
-			sms_debug("MSG_SMS_GPIO_CONFIG_EX_RES");
-			complete(&coredev->gpio_configuration_done);
-			break;
-		case MSG_SMS_GPIO_SET_LEVEL_RES:
-			sms_debug("MSG_SMS_GPIO_SET_LEVEL_RES");
-			complete(&coredev->gpio_set_level_done);
-			break;
-		case MSG_SMS_GPIO_GET_LEVEL_RES:
-		{
-			u32 *msgdata = (u32 *) phdr;
-			coredev->gpio_get_res = msgdata[1];
-			sms_debug("MSG_SMS_GPIO_GET_LEVEL_RES gpio level %d",
-					coredev->gpio_get_res);
-			complete(&coredev->gpio_get_level_done);
-			break;
-		}
-		case MSG_SMS_START_IR_RES:
-			complete(&coredev->ir_init_done);
-			break;
-		case MSG_SMS_IR_SAMPLES_IND:
-			sms_ir_event(coredev,
-				(const char *)
-				((char *)phdr
-				+ sizeof(struct SmsMsgHdr_ST)),
-				(int)phdr->msgLength
-				- sizeof(struct SmsMsgHdr_ST));
-			break;
-
-		default:
-			break;
-		}
-		smscore_putbuffer(coredev, cb);
-	}
-}
-EXPORT_SYMBOL_GPL(smscore_onresponse);
-
-/**
- * return pointer to next free buffer descriptor from core pool
- *
- * @param coredev pointer to a coredev object returned by
- *                smscore_register_device
- *
- * @return pointer to descriptor on success, NULL on error.
- */
-
-struct smscore_buffer_t *get_entry(struct smscore_device_t *coredev)
-{
-	struct smscore_buffer_t *cb = NULL;
-	unsigned long flags;
-
-	spin_lock_irqsave(&coredev->bufferslock, flags);
-	if (!list_empty(&coredev->buffers)) {
-		cb = (struct smscore_buffer_t *) coredev->buffers.next;
-		list_del(&cb->entry);
-	}
-	spin_unlock_irqrestore(&coredev->bufferslock, flags);
-	return cb;
-}
-
-struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev)
-{
-	struct smscore_buffer_t *cb = NULL;
-
-	wait_event(coredev->buffer_mng_waitq, (cb = get_entry(coredev)));
-
-	return cb;
-}
-EXPORT_SYMBOL_GPL(smscore_getbuffer);
-
-/**
- * return buffer descriptor to a pool
- *
- * @param coredev pointer to a coredev object returned by
- *                smscore_register_device
- * @param cb pointer buffer descriptor
- *
- */
-void smscore_putbuffer(struct smscore_device_t *coredev,
-		struct smscore_buffer_t *cb) {
-	wake_up_interruptible(&coredev->buffer_mng_waitq);
-	list_add_locked(&cb->entry, &coredev->buffers, &coredev->bufferslock);
-}
-EXPORT_SYMBOL_GPL(smscore_putbuffer);
-
-static int smscore_validate_client(struct smscore_device_t *coredev,
-				   struct smscore_client_t *client,
-				   int data_type, int id)
-{
-	struct smscore_idlist_t *listentry;
-	struct smscore_client_t *registered_client;
-
-	if (!client) {
-		sms_err("bad parameter.");
-		return -EINVAL;
-	}
-	registered_client = smscore_find_client(coredev, data_type, id);
-	if (registered_client == client)
-		return 0;
-
-	if (registered_client) {
-		sms_err("The msg ID already registered to another client.");
-		return -EEXIST;
-	}
-	listentry = kzalloc(sizeof(struct smscore_idlist_t), GFP_KERNEL);
-	if (!listentry) {
-		sms_err("Can't allocate memory for client id.");
-		return -ENOMEM;
-	}
-	listentry->id = id;
-	listentry->data_type = data_type;
-	list_add_locked(&listentry->entry, &client->idlist,
-			&coredev->clientslock);
-	return 0;
-}
-
-/**
- * creates smsclient object, check that id is taken by another client
- *
- * @param coredev pointer to a coredev object from clients hotplug
- * @param initial_id all messages with this id would be sent to this client
- * @param data_type all messages of this type would be sent to this client
- * @param onresponse_handler client handler that is called to
- *                           process incoming messages
- * @param onremove_handler client handler that is called when device is removed
- * @param context client-specific context
- * @param client pointer to a value that receives created smsclient object
- *
- * @return 0 on success, <0 on error.
- */
-int smscore_register_client(struct smscore_device_t *coredev,
-			    struct smsclient_params_t *params,
-			    struct smscore_client_t **client)
-{
-	struct smscore_client_t *newclient;
-	/* check that no other channel with same parameters exists */
-	if (smscore_find_client(coredev, params->data_type,
-				params->initial_id)) {
-		sms_err("Client already exist.");
-		return -EEXIST;
-	}
-
-	newclient = kzalloc(sizeof(struct smscore_client_t), GFP_KERNEL);
-	if (!newclient) {
-		sms_err("Failed to allocate memory for client.");
-		return -ENOMEM;
-	}
-
-	INIT_LIST_HEAD(&newclient->idlist);
-	newclient->coredev = coredev;
-	newclient->onresponse_handler = params->onresponse_handler;
-	newclient->onremove_handler = params->onremove_handler;
-	newclient->context = params->context;
-	list_add_locked(&newclient->entry, &coredev->clients,
-			&coredev->clientslock);
-	smscore_validate_client(coredev, newclient, params->data_type,
-				params->initial_id);
-	*client = newclient;
-	sms_debug("%p %d %d", params->context, params->data_type,
-		  params->initial_id);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(smscore_register_client);
-
-/**
- * frees smsclient object and all subclients associated with it
- *
- * @param client pointer to smsclient object returned by
- *               smscore_register_client
- *
- */
-void smscore_unregister_client(struct smscore_client_t *client)
-{
-	struct smscore_device_t *coredev = client->coredev;
-	unsigned long flags;
-
-	spin_lock_irqsave(&coredev->clientslock, flags);
-
-
-	while (!list_empty(&client->idlist)) {
-		struct smscore_idlist_t *identry =
-			(struct smscore_idlist_t *) client->idlist.next;
-		list_del(&identry->entry);
-		kfree(identry);
-	}
-
-	sms_info("%p", client->context);
-
-	list_del(&client->entry);
-	kfree(client);
-
-	spin_unlock_irqrestore(&coredev->clientslock, flags);
-}
-EXPORT_SYMBOL_GPL(smscore_unregister_client);
-
-/**
- * verifies that source id is not taken by another client,
- * calls device handler to send requests to the device
- *
- * @param client pointer to smsclient object returned by
- *               smscore_register_client
- * @param buffer pointer to a request buffer
- * @param size size (in bytes) of request buffer
- *
- * @return 0 on success, <0 on error.
- */
-int smsclient_sendrequest(struct smscore_client_t *client,
-			  void *buffer, size_t size)
-{
-	struct smscore_device_t *coredev;
-	struct SmsMsgHdr_ST *phdr = (struct SmsMsgHdr_ST *) buffer;
-	int rc;
-
-	if (client == NULL) {
-		sms_err("Got NULL client");
-		return -EINVAL;
-	}
-
-	coredev = client->coredev;
-
-	/* check that no other channel with same id exists */
-	if (coredev == NULL) {
-		sms_err("Got NULL coredev");
-		return -EINVAL;
-	}
-
-	rc = smscore_validate_client(client->coredev, client, 0,
-				     phdr->msgSrcId);
-	if (rc < 0)
-		return rc;
-
-	return coredev->sendrequest_handler(coredev->context, buffer, size);
-}
-EXPORT_SYMBOL_GPL(smsclient_sendrequest);
-
-
-/* old GPIO managements implementation */
-int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin,
-			   struct smscore_config_gpio *pinconfig)
-{
-	struct {
-		struct SmsMsgHdr_ST hdr;
-		u32 data[6];
-	} msg;
-
-	if (coredev->device_flags & SMS_DEVICE_FAMILY2) {
-		msg.hdr.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
-		msg.hdr.msgDstId = HIF_TASK;
-		msg.hdr.msgFlags = 0;
-		msg.hdr.msgType  = MSG_SMS_GPIO_CONFIG_EX_REQ;
-		msg.hdr.msgLength = sizeof(msg);
-
-		msg.data[0] = pin;
-		msg.data[1] = pinconfig->pullupdown;
-
-		/* Convert slew rate for Nova: Fast(0) = 3 / Slow(1) = 0; */
-		msg.data[2] = pinconfig->outputslewrate == 0 ? 3 : 0;
-
-		switch (pinconfig->outputdriving) {
-		case SMS_GPIO_OUTPUTDRIVING_16mA:
-			msg.data[3] = 7; /* Nova - 16mA */
-			break;
-		case SMS_GPIO_OUTPUTDRIVING_12mA:
-			msg.data[3] = 5; /* Nova - 11mA */
-			break;
-		case SMS_GPIO_OUTPUTDRIVING_8mA:
-			msg.data[3] = 3; /* Nova - 7mA */
-			break;
-		case SMS_GPIO_OUTPUTDRIVING_4mA:
-		default:
-			msg.data[3] = 2; /* Nova - 4mA */
-			break;
-		}
-
-		msg.data[4] = pinconfig->direction;
-		msg.data[5] = 0;
-	} else /* TODO: SMS_DEVICE_FAMILY1 */
-		return -EINVAL;
-
-	return coredev->sendrequest_handler(coredev->context,
-					    &msg, sizeof(msg));
-}
-
-int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level)
-{
-	struct {
-		struct SmsMsgHdr_ST hdr;
-		u32 data[3];
-	} msg;
-
-	if (pin > MAX_GPIO_PIN_NUMBER)
-		return -EINVAL;
-
-	msg.hdr.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
-	msg.hdr.msgDstId = HIF_TASK;
-	msg.hdr.msgFlags = 0;
-	msg.hdr.msgType  = MSG_SMS_GPIO_SET_LEVEL_REQ;
-	msg.hdr.msgLength = sizeof(msg);
-
-	msg.data[0] = pin;
-	msg.data[1] = level ? 1 : 0;
-	msg.data[2] = 0;
-
-	return coredev->sendrequest_handler(coredev->context,
-					    &msg, sizeof(msg));
-}
-
-/* new GPIO management implementation */
-static int GetGpioPinParams(u32 PinNum, u32 *pTranslatedPinNum,
-		u32 *pGroupNum, u32 *pGroupCfg) {
-
-	*pGroupCfg = 1;
-
-	if (PinNum <= 1)	{
-		*pTranslatedPinNum = 0;
-		*pGroupNum = 9;
-		*pGroupCfg = 2;
-	} else if (PinNum >= 2 && PinNum <= 6) {
-		*pTranslatedPinNum = 2;
-		*pGroupNum = 0;
-		*pGroupCfg = 2;
-	} else if (PinNum >= 7 && PinNum <= 11) {
-		*pTranslatedPinNum = 7;
-		*pGroupNum = 1;
-	} else if (PinNum >= 12 && PinNum <= 15) {
-		*pTranslatedPinNum = 12;
-		*pGroupNum = 2;
-		*pGroupCfg = 3;
-	} else if (PinNum == 16) {
-		*pTranslatedPinNum = 16;
-		*pGroupNum = 23;
-	} else if (PinNum >= 17 && PinNum <= 24) {
-		*pTranslatedPinNum = 17;
-		*pGroupNum = 3;
-	} else if (PinNum == 25) {
-		*pTranslatedPinNum = 25;
-		*pGroupNum = 6;
-	} else if (PinNum >= 26 && PinNum <= 28) {
-		*pTranslatedPinNum = 26;
-		*pGroupNum = 4;
-	} else if (PinNum == 29) {
-		*pTranslatedPinNum = 29;
-		*pGroupNum = 5;
-		*pGroupCfg = 2;
-	} else if (PinNum == 30) {
-		*pTranslatedPinNum = 30;
-		*pGroupNum = 8;
-	} else if (PinNum == 31) {
-		*pTranslatedPinNum = 31;
-		*pGroupNum = 17;
-	} else
-		return -1;
-
-	*pGroupCfg <<= 24;
-
-	return 0;
-}
-
-int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum,
-		struct smscore_gpio_config *pGpioConfig) {
-
-	u32 totalLen;
-	u32 TranslatedPinNum = 0;
-	u32 GroupNum = 0;
-	u32 ElectricChar;
-	u32 groupCfg;
-	void *buffer;
-	int rc;
-
-	struct SetGpioMsg {
-		struct SmsMsgHdr_ST xMsgHeader;
-		u32 msgData[6];
-	} *pMsg;
-
-
-	if (PinNum > MAX_GPIO_PIN_NUMBER)
-		return -EINVAL;
-
-	if (pGpioConfig == NULL)
-		return -EINVAL;
-
-	totalLen = sizeof(struct SmsMsgHdr_ST) + (sizeof(u32) * 6);
-
-	buffer = kmalloc(totalLen + SMS_DMA_ALIGNMENT,
-			GFP_KERNEL | GFP_DMA);
-	if (!buffer)
-		return -ENOMEM;
-
-	pMsg = (struct SetGpioMsg *) SMS_ALIGN_ADDRESS(buffer);
-
-	pMsg->xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
-	pMsg->xMsgHeader.msgDstId = HIF_TASK;
-	pMsg->xMsgHeader.msgFlags = 0;
-	pMsg->xMsgHeader.msgLength = (u16) totalLen;
-	pMsg->msgData[0] = PinNum;
-
-	if (!(coredev->device_flags & SMS_DEVICE_FAMILY2)) {
-		pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_CONFIG_REQ;
-		if (GetGpioPinParams(PinNum, &TranslatedPinNum, &GroupNum,
-				&groupCfg) != 0) {
-			rc = -EINVAL;
-			goto free;
-		}
-
-		pMsg->msgData[1] = TranslatedPinNum;
-		pMsg->msgData[2] = GroupNum;
-		ElectricChar = (pGpioConfig->PullUpDown)
-				| (pGpioConfig->InputCharacteristics << 2)
-				| (pGpioConfig->OutputSlewRate << 3)
-				| (pGpioConfig->OutputDriving << 4);
-		pMsg->msgData[3] = ElectricChar;
-		pMsg->msgData[4] = pGpioConfig->Direction;
-		pMsg->msgData[5] = groupCfg;
-	} else {
-		pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_CONFIG_EX_REQ;
-		pMsg->msgData[1] = pGpioConfig->PullUpDown;
-		pMsg->msgData[2] = pGpioConfig->OutputSlewRate;
-		pMsg->msgData[3] = pGpioConfig->OutputDriving;
-		pMsg->msgData[4] = pGpioConfig->Direction;
-		pMsg->msgData[5] = 0;
-	}
-
-	smsendian_handle_tx_message((struct SmsMsgHdr_ST *)pMsg);
-	rc = smscore_sendrequest_and_wait(coredev, pMsg, totalLen,
-			&coredev->gpio_configuration_done);
-
-	if (rc != 0) {
-		if (rc == -ETIME)
-			sms_err("smscore_gpio_configure timeout");
-		else
-			sms_err("smscore_gpio_configure error");
-	}
-free:
-	kfree(buffer);
-
-	return rc;
-}
-
-int smscore_gpio_set_level(struct smscore_device_t *coredev, u8 PinNum,
-		u8 NewLevel) {
-
-	u32 totalLen;
-	int rc;
-	void *buffer;
-
-	struct SetGpioMsg {
-		struct SmsMsgHdr_ST xMsgHeader;
-		u32 msgData[3]; /* keep it 3 ! */
-	} *pMsg;
-
-	if ((NewLevel > 1) || (PinNum > MAX_GPIO_PIN_NUMBER))
-		return -EINVAL;
-
-	totalLen = sizeof(struct SmsMsgHdr_ST) +
-			(3 * sizeof(u32)); /* keep it 3 ! */
-
-	buffer = kmalloc(totalLen + SMS_DMA_ALIGNMENT,
-			GFP_KERNEL | GFP_DMA);
-	if (!buffer)
-		return -ENOMEM;
-
-	pMsg = (struct SetGpioMsg *) SMS_ALIGN_ADDRESS(buffer);
-
-	pMsg->xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
-	pMsg->xMsgHeader.msgDstId = HIF_TASK;
-	pMsg->xMsgHeader.msgFlags = 0;
-	pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_SET_LEVEL_REQ;
-	pMsg->xMsgHeader.msgLength = (u16) totalLen;
-	pMsg->msgData[0] = PinNum;
-	pMsg->msgData[1] = NewLevel;
-
-	/* Send message to SMS */
-	smsendian_handle_tx_message((struct SmsMsgHdr_ST *)pMsg);
-	rc = smscore_sendrequest_and_wait(coredev, pMsg, totalLen,
-			&coredev->gpio_set_level_done);
-
-	if (rc != 0) {
-		if (rc == -ETIME)
-			sms_err("smscore_gpio_set_level timeout");
-		else
-			sms_err("smscore_gpio_set_level error");
-	}
-	kfree(buffer);
-
-	return rc;
-}
-
-int smscore_gpio_get_level(struct smscore_device_t *coredev, u8 PinNum,
-		u8 *level) {
-
-	u32 totalLen;
-	int rc;
-	void *buffer;
-
-	struct SetGpioMsg {
-		struct SmsMsgHdr_ST xMsgHeader;
-		u32 msgData[2];
-	} *pMsg;
-
-
-	if (PinNum > MAX_GPIO_PIN_NUMBER)
-		return -EINVAL;
-
-	totalLen = sizeof(struct SmsMsgHdr_ST) + (2 * sizeof(u32));
-
-	buffer = kmalloc(totalLen + SMS_DMA_ALIGNMENT,
-			GFP_KERNEL | GFP_DMA);
-	if (!buffer)
-		return -ENOMEM;
-
-	pMsg = (struct SetGpioMsg *) SMS_ALIGN_ADDRESS(buffer);
-
-	pMsg->xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
-	pMsg->xMsgHeader.msgDstId = HIF_TASK;
-	pMsg->xMsgHeader.msgFlags = 0;
-	pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_GET_LEVEL_REQ;
-	pMsg->xMsgHeader.msgLength = (u16) totalLen;
-	pMsg->msgData[0] = PinNum;
-	pMsg->msgData[1] = 0;
-
-	/* Send message to SMS */
-	smsendian_handle_tx_message((struct SmsMsgHdr_ST *)pMsg);
-	rc = smscore_sendrequest_and_wait(coredev, pMsg, totalLen,
-			&coredev->gpio_get_level_done);
-
-	if (rc != 0) {
-		if (rc == -ETIME)
-			sms_err("smscore_gpio_get_level timeout");
-		else
-			sms_err("smscore_gpio_get_level error");
-	}
-	kfree(buffer);
-
-	/* Its a race between other gpio_get_level() and the copy of the single
-	 * global 'coredev->gpio_get_res' to  the function's variable 'level'
-	 */
-	*level = coredev->gpio_get_res;
-
-	return rc;
-}
-
-static int __init smscore_module_init(void)
-{
-	int rc = 0;
-
-	INIT_LIST_HEAD(&g_smscore_notifyees);
-	INIT_LIST_HEAD(&g_smscore_devices);
-	kmutex_init(&g_smscore_deviceslock);
-
-	INIT_LIST_HEAD(&g_smscore_registry);
-	kmutex_init(&g_smscore_registrylock);
-
-	return rc;
-}
-
-static void __exit smscore_module_exit(void)
-{
-	kmutex_lock(&g_smscore_deviceslock);
-	while (!list_empty(&g_smscore_notifyees)) {
-		struct smscore_device_notifyee_t *notifyee =
-			(struct smscore_device_notifyee_t *)
-				g_smscore_notifyees.next;
-
-		list_del(&notifyee->entry);
-		kfree(notifyee);
-	}
-	kmutex_unlock(&g_smscore_deviceslock);
-
-	kmutex_lock(&g_smscore_registrylock);
-	while (!list_empty(&g_smscore_registry)) {
-		struct smscore_registry_entry_t *entry =
-			(struct smscore_registry_entry_t *)
-				g_smscore_registry.next;
-
-		list_del(&entry->entry);
-		kfree(entry);
-	}
-	kmutex_unlock(&g_smscore_registrylock);
-
-	sms_debug("");
-}
-
-module_init(smscore_module_init);
-module_exit(smscore_module_exit);
-
-MODULE_DESCRIPTION("Siano MDTV Core module");
-MODULE_AUTHOR("Siano Mobile Silicon, Inc. (uris@siano-ms.com)");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/siano/smscoreapi.h b/drivers/media/dvb/siano/smscoreapi.h
deleted file mode 100644
index c592ae0..0000000
--- a/drivers/media/dvb/siano/smscoreapi.h
+++ /dev/null
@@ -1,775 +0,0 @@
-/****************************************************************
-
-Siano Mobile Silicon, Inc.
-MDTV receiver kernel modules.
-Copyright (C) 2006-2008, Uri Shkolnik, Anatoly Greenblat
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-****************************************************************/
-
-#ifndef __SMS_CORE_API_H__
-#define __SMS_CORE_API_H__
-
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/mm.h>
-#include <linux/scatterlist.h>
-#include <linux/types.h>
-#include <linux/mutex.h>
-#include <linux/wait.h>
-#include <linux/timer.h>
-
-#include <asm/page.h>
-
-#include "smsir.h"
-
-#define kmutex_init(_p_) mutex_init(_p_)
-#define kmutex_lock(_p_) mutex_lock(_p_)
-#define kmutex_trylock(_p_) mutex_trylock(_p_)
-#define kmutex_unlock(_p_) mutex_unlock(_p_)
-
-#ifndef min
-#define min(a, b) (((a) < (b)) ? (a) : (b))
-#endif
-
-#define SMS_PROTOCOL_MAX_RAOUNDTRIP_MS			(10000)
-#define SMS_ALLOC_ALIGNMENT				128
-#define SMS_DMA_ALIGNMENT				16
-#define SMS_ALIGN_ADDRESS(addr) \
-	((((uintptr_t)(addr)) + (SMS_DMA_ALIGNMENT-1)) & ~(SMS_DMA_ALIGNMENT-1))
-
-#define SMS_DEVICE_FAMILY2				1
-#define SMS_ROM_NO_RESPONSE				2
-#define SMS_DEVICE_NOT_READY				0x8000000
-
-enum sms_device_type_st {
-	SMS_STELLAR = 0,
-	SMS_NOVA_A0,
-	SMS_NOVA_B0,
-	SMS_VEGA,
-	SMS_NUM_OF_DEVICE_TYPES
-};
-
-struct smscore_device_t;
-struct smscore_client_t;
-struct smscore_buffer_t;
-
-typedef int (*hotplug_t)(struct smscore_device_t *coredev,
-			 struct device *device, int arrival);
-
-typedef int (*setmode_t)(void *context, int mode);
-typedef void (*detectmode_t)(void *context, int *mode);
-typedef int (*sendrequest_t)(void *context, void *buffer, size_t size);
-typedef int (*loadfirmware_t)(void *context, void *buffer, size_t size);
-typedef int (*preload_t)(void *context);
-typedef int (*postload_t)(void *context);
-
-typedef int (*onresponse_t)(void *context, struct smscore_buffer_t *cb);
-typedef void (*onremove_t)(void *context);
-
-struct smscore_buffer_t {
-	/* public members, once passed to clients can be changed freely */
-	struct list_head entry;
-	int size;
-	int offset;
-
-	/* private members, read-only for clients */
-	void *p;
-	dma_addr_t phys;
-	unsigned long offset_in_common;
-};
-
-struct smsdevice_params_t {
-	struct device	*device;
-
-	int				buffer_size;
-	int				num_buffers;
-
-	char			devpath[32];
-	unsigned long	flags;
-
-	setmode_t		setmode_handler;
-	detectmode_t	detectmode_handler;
-	sendrequest_t	sendrequest_handler;
-	preload_t		preload_handler;
-	postload_t		postload_handler;
-
-	void			*context;
-	enum sms_device_type_st device_type;
-};
-
-struct smsclient_params_t {
-	int				initial_id;
-	int				data_type;
-	onresponse_t	onresponse_handler;
-	onremove_t		onremove_handler;
-	void			*context;
-};
-
-struct smscore_device_t {
-	struct list_head entry;
-
-	struct list_head clients;
-	struct list_head subclients;
-	spinlock_t clientslock;
-
-	struct list_head buffers;
-	spinlock_t bufferslock;
-	int num_buffers;
-
-	void *common_buffer;
-	int common_buffer_size;
-	dma_addr_t common_buffer_phys;
-
-	void *context;
-	struct device *device;
-
-	char devpath[32];
-	unsigned long device_flags;
-
-	setmode_t setmode_handler;
-	detectmode_t detectmode_handler;
-	sendrequest_t sendrequest_handler;
-	preload_t preload_handler;
-	postload_t postload_handler;
-
-	int mode, modes_supported;
-
-	/* host <--> device messages */
-	struct completion version_ex_done, data_download_done, trigger_done;
-	struct completion init_device_done, reload_start_done, resume_done;
-	struct completion gpio_configuration_done, gpio_set_level_done;
-	struct completion gpio_get_level_done, ir_init_done;
-
-	/* Buffer management */
-	wait_queue_head_t buffer_mng_waitq;
-
-	/* GPIO */
-	int gpio_get_res;
-
-	/* Target hardware board */
-	int board_id;
-
-	/* Firmware */
-	u8 *fw_buf;
-	u32 fw_buf_size;
-
-	/* Infrared (IR) */
-	struct ir_t ir;
-
-	int led_state;
-};
-
-/* GPIO definitions for antenna frequency domain control (SMS8021) */
-#define SMS_ANTENNA_GPIO_0					1
-#define SMS_ANTENNA_GPIO_1					0
-
-#define BW_8_MHZ							0
-#define BW_7_MHZ							1
-#define BW_6_MHZ							2
-#define BW_5_MHZ							3
-#define BW_ISDBT_1SEG						4
-#define BW_ISDBT_3SEG						5
-
-#define MSG_HDR_FLAG_SPLIT_MSG				4
-
-#define MAX_GPIO_PIN_NUMBER					31
-
-#define HIF_TASK							11
-#define SMS_HOST_LIB						150
-#define DVBT_BDA_CONTROL_MSG_ID				201
-
-#define SMS_MAX_PAYLOAD_SIZE				240
-#define SMS_TUNE_TIMEOUT					500
-
-#define MSG_SMS_GPIO_CONFIG_REQ				507
-#define MSG_SMS_GPIO_CONFIG_RES				508
-#define MSG_SMS_GPIO_SET_LEVEL_REQ			509
-#define MSG_SMS_GPIO_SET_LEVEL_RES			510
-#define MSG_SMS_GPIO_GET_LEVEL_REQ			511
-#define MSG_SMS_GPIO_GET_LEVEL_RES			512
-#define MSG_SMS_RF_TUNE_REQ					561
-#define MSG_SMS_RF_TUNE_RES					562
-#define MSG_SMS_INIT_DEVICE_REQ				578
-#define MSG_SMS_INIT_DEVICE_RES				579
-#define MSG_SMS_ADD_PID_FILTER_REQ			601
-#define MSG_SMS_ADD_PID_FILTER_RES			602
-#define MSG_SMS_REMOVE_PID_FILTER_REQ			603
-#define MSG_SMS_REMOVE_PID_FILTER_RES			604
-#define MSG_SMS_DAB_CHANNEL				607
-#define MSG_SMS_GET_PID_FILTER_LIST_REQ			608
-#define MSG_SMS_GET_PID_FILTER_LIST_RES			609
-#define MSG_SMS_GET_STATISTICS_RES			616
-#define MSG_SMS_GET_STATISTICS_REQ			615
-#define MSG_SMS_HO_PER_SLICES_IND			630
-#define MSG_SMS_SET_ANTENNA_CONFIG_REQ			651
-#define MSG_SMS_SET_ANTENNA_CONFIG_RES			652
-#define MSG_SMS_SLEEP_RESUME_COMP_IND			655
-#define MSG_SMS_DATA_DOWNLOAD_REQ			660
-#define MSG_SMS_DATA_DOWNLOAD_RES			661
-#define MSG_SMS_SWDOWNLOAD_TRIGGER_REQ		664
-#define MSG_SMS_SWDOWNLOAD_TRIGGER_RES		665
-#define MSG_SMS_SWDOWNLOAD_BACKDOOR_REQ		666
-#define MSG_SMS_SWDOWNLOAD_BACKDOOR_RES		667
-#define MSG_SMS_GET_VERSION_EX_REQ			668
-#define MSG_SMS_GET_VERSION_EX_RES			669
-#define MSG_SMS_SET_CLOCK_OUTPUT_REQ		670
-#define MSG_SMS_I2C_SET_FREQ_REQ			685
-#define MSG_SMS_GENERIC_I2C_REQ				687
-#define MSG_SMS_GENERIC_I2C_RES				688
-#define MSG_SMS_DVBT_BDA_DATA				693
-#define MSG_SW_RELOAD_REQ					697
-#define MSG_SMS_DATA_MSG					699
-#define MSG_SW_RELOAD_START_REQ				702
-#define MSG_SW_RELOAD_START_RES				703
-#define MSG_SW_RELOAD_EXEC_REQ				704
-#define MSG_SW_RELOAD_EXEC_RES				705
-#define MSG_SMS_SPI_INT_LINE_SET_REQ		710
-#define MSG_SMS_GPIO_CONFIG_EX_REQ			712
-#define MSG_SMS_GPIO_CONFIG_EX_RES			713
-#define MSG_SMS_ISDBT_TUNE_REQ				776
-#define MSG_SMS_ISDBT_TUNE_RES				777
-#define MSG_SMS_TRANSMISSION_IND			782
-#define MSG_SMS_START_IR_REQ				800
-#define MSG_SMS_START_IR_RES				801
-#define MSG_SMS_IR_SAMPLES_IND				802
-#define MSG_SMS_SIGNAL_DETECTED_IND			827
-#define MSG_SMS_NO_SIGNAL_IND				828
-
-#define SMS_INIT_MSG_EX(ptr, type, src, dst, len) do { \
-	(ptr)->msgType = type; (ptr)->msgSrcId = src; (ptr)->msgDstId = dst; \
-	(ptr)->msgLength = len; (ptr)->msgFlags = 0; \
-} while (0)
-
-#define SMS_INIT_MSG(ptr, type, len) \
-	SMS_INIT_MSG_EX(ptr, type, 0, HIF_TASK, len)
-
-enum SMS_DVB3_EVENTS {
-	DVB3_EVENT_INIT = 0,
-	DVB3_EVENT_SLEEP,
-	DVB3_EVENT_HOTPLUG,
-	DVB3_EVENT_FE_LOCK,
-	DVB3_EVENT_FE_UNLOCK,
-	DVB3_EVENT_UNC_OK,
-	DVB3_EVENT_UNC_ERR
-};
-
-enum SMS_DEVICE_MODE {
-	DEVICE_MODE_NONE = -1,
-	DEVICE_MODE_DVBT = 0,
-	DEVICE_MODE_DVBH,
-	DEVICE_MODE_DAB_TDMB,
-	DEVICE_MODE_DAB_TDMB_DABIP,
-	DEVICE_MODE_DVBT_BDA,
-	DEVICE_MODE_ISDBT,
-	DEVICE_MODE_ISDBT_BDA,
-	DEVICE_MODE_CMMB,
-	DEVICE_MODE_RAW_TUNER,
-	DEVICE_MODE_MAX,
-};
-
-struct SmsMsgHdr_ST {
-	u16	msgType;
-	u8	msgSrcId;
-	u8	msgDstId;
-	u16	msgLength; /* Length of entire message, including header */
-	u16	msgFlags;
-};
-
-struct SmsMsgData_ST {
-	struct SmsMsgHdr_ST xMsgHeader;
-	u32 msgData[1];
-};
-
-struct SmsMsgData_ST2 {
-	struct SmsMsgHdr_ST xMsgHeader;
-	u32 msgData[2];
-};
-
-struct SmsDataDownload_ST {
-	struct SmsMsgHdr_ST	xMsgHeader;
-	u32			MemAddr;
-	u8			Payload[SMS_MAX_PAYLOAD_SIZE];
-};
-
-struct SmsVersionRes_ST {
-	struct SmsMsgHdr_ST	xMsgHeader;
-
-	u16		ChipModel; /* e.g. 0x1102 for SMS-1102 "Nova" */
-	u8		Step; /* 0 - Step A */
-	u8		MetalFix; /* 0 - Metal 0 */
-
-	/* FirmwareId 0xFF if ROM, otherwise the
-	 * value indicated by SMSHOSTLIB_DEVICE_MODES_E */
-	u8 FirmwareId;
-	/* SupportedProtocols Bitwise OR combination of
-					     * supported protocols */
-	u8 SupportedProtocols;
-
-	u8		VersionMajor;
-	u8		VersionMinor;
-	u8		VersionPatch;
-	u8		VersionFieldPatch;
-
-	u8		RomVersionMajor;
-	u8		RomVersionMinor;
-	u8		RomVersionPatch;
-	u8		RomVersionFieldPatch;
-
-	u8		TextLabel[34];
-};
-
-struct SmsFirmware_ST {
-	u32			CheckSum;
-	u32			Length;
-	u32			StartAddress;
-	u8			Payload[1];
-};
-
-/* Statistics information returned as response for
- * SmsHostApiGetStatistics_Req */
-struct SMSHOSTLIB_STATISTICS_ST {
-	u32 Reserved;		/* Reserved */
-
-	/* Common parameters */
-	u32 IsRfLocked;		/* 0 - not locked, 1 - locked */
-	u32 IsDemodLocked;	/* 0 - not locked, 1 - locked */
-	u32 IsExternalLNAOn;	/* 0 - external LNA off, 1 - external LNA on */
-
-	/* Reception quality */
-	s32 SNR;		/* dB */
-	u32 BER;		/* Post Viterbi BER [1E-5] */
-	u32 FIB_CRC;		/* CRC errors percentage, valid only for DAB */
-	u32 TS_PER;		/* Transport stream PER,
-	0xFFFFFFFF indicate N/A, valid only for DVB-T/H */
-	u32 MFER;		/* DVB-H frame error rate in percentage,
-	0xFFFFFFFF indicate N/A, valid only for DVB-H */
-	s32 RSSI;		/* dBm */
-	s32 InBandPwr;		/* In band power in dBM */
-	s32 CarrierOffset;	/* Carrier Offset in bin/1024 */
-
-	/* Transmission parameters */
-	u32 Frequency;		/* Frequency in Hz */
-	u32 Bandwidth;		/* Bandwidth in MHz, valid only for DVB-T/H */
-	u32 TransmissionMode;	/* Transmission Mode, for DAB modes 1-4,
-	for DVB-T/H FFT mode carriers in Kilos */
-	u32 ModemState;		/* from SMSHOSTLIB_DVB_MODEM_STATE_ET,
-	valid only for DVB-T/H */
-	u32 GuardInterval;	/* Guard Interval from
-	SMSHOSTLIB_GUARD_INTERVALS_ET, 	valid only for DVB-T/H */
-	u32 CodeRate;		/* Code Rate from SMSHOSTLIB_CODE_RATE_ET,
-	valid only for DVB-T/H */
-	u32 LPCodeRate;		/* Low Priority Code Rate from
-	SMSHOSTLIB_CODE_RATE_ET, valid only for DVB-T/H */
-	u32 Hierarchy;		/* Hierarchy from SMSHOSTLIB_HIERARCHY_ET,
-	valid only for DVB-T/H */
-	u32 Constellation;	/* Constellation from
-	SMSHOSTLIB_CONSTELLATION_ET, valid only for DVB-T/H */
-
-	/* Burst parameters, valid only for DVB-H */
-	u32 BurstSize;		/* Current burst size in bytes,
-	valid only for DVB-H */
-	u32 BurstDuration;	/* Current burst duration in mSec,
-	valid only for DVB-H */
-	u32 BurstCycleTime;	/* Current burst cycle time in mSec,
-	valid only for DVB-H */
-	u32 CalculatedBurstCycleTime;/* Current burst cycle time in mSec,
-	as calculated by demodulator, valid only for DVB-H */
-	u32 NumOfRows;		/* Number of rows in MPE table,
-	valid only for DVB-H */
-	u32 NumOfPaddCols;	/* Number of padding columns in MPE table,
-	valid only for DVB-H */
-	u32 NumOfPunctCols;	/* Number of puncturing columns in MPE table,
-	valid only for DVB-H */
-	u32 ErrorTSPackets;	/* Number of erroneous
-	transport-stream packets */
-	u32 TotalTSPackets;	/* Total number of transport-stream packets */
-	u32 NumOfValidMpeTlbs;	/* Number of MPE tables which do not include
-	errors after MPE RS decoding */
-	u32 NumOfInvalidMpeTlbs;/* Number of MPE tables which include errors
-	after MPE RS decoding */
-	u32 NumOfCorrectedMpeTlbs;/* Number of MPE tables which were
-	corrected by MPE RS decoding */
-	/* Common params */
-	u32 BERErrorCount;	/* Number of errornous SYNC bits. */
-	u32 BERBitCount;	/* Total number of SYNC bits. */
-
-	/* Interface information */
-	u32 SmsToHostTxErrors;	/* Total number of transmission errors. */
-
-	/* DAB/T-DMB */
-	u32 PreBER; 		/* DAB/T-DMB only: Pre Viterbi BER [1E-5] */
-
-	/* DVB-H TPS parameters */
-	u32 CellId;		/* TPS Cell ID in bits 15..0, bits 31..16 zero;
-	 if set to 0xFFFFFFFF cell_id not yet recovered */
-	u32 DvbhSrvIndHP;	/* DVB-H service indication info, bit 1 -
-	Time Slicing indicator, bit 0 - MPE-FEC indicator */
-	u32 DvbhSrvIndLP;	/* DVB-H service indication info, bit 1 -
-	Time Slicing indicator, bit 0 - MPE-FEC indicator */
-
-	u32 NumMPEReceived;	/* DVB-H, Num MPE section received */
-
-	u32 ReservedFields[10];	/* Reserved */
-};
-
-struct SmsMsgStatisticsInfo_ST {
-	u32 RequestResult;
-
-	struct SMSHOSTLIB_STATISTICS_ST Stat;
-
-	/* Split the calc of the SNR in DAB */
-	u32 Signal; /* dB */
-	u32 Noise; /* dB */
-
-};
-
-struct SMSHOSTLIB_ISDBT_LAYER_STAT_ST {
-	/* Per-layer information */
-	u32 CodeRate; /* Code Rate from SMSHOSTLIB_CODE_RATE_ET,
-		       * 255 means layer does not exist */
-	u32 Constellation; /* Constellation from SMSHOSTLIB_CONSTELLATION_ET,
-			    * 255 means layer does not exist */
-	u32 BER; /* Post Viterbi BER [1E-5], 0xFFFFFFFF indicate N/A */
-	u32 BERErrorCount; /* Post Viterbi Error Bits Count */
-	u32 BERBitCount; /* Post Viterbi Total Bits Count */
-	u32 PreBER; /* Pre Viterbi BER [1E-5], 0xFFFFFFFF indicate N/A */
-	u32 TS_PER; /* Transport stream PER [%], 0xFFFFFFFF indicate N/A */
-	u32 ErrorTSPackets; /* Number of erroneous transport-stream packets */
-	u32 TotalTSPackets; /* Total number of transport-stream packets */
-	u32 TILdepthI; /* Time interleaver depth I parameter,
-			* 255 means layer does not exist */
-	u32 NumberOfSegments; /* Number of segments in layer A,
-			       * 255 means layer does not exist */
-	u32 TMCCErrors; /* TMCC errors */
-};
-
-struct SMSHOSTLIB_STATISTICS_ISDBT_ST {
-	u32 StatisticsType; /* Enumerator identifying the type of the
-				* structure.  Values are the same as
-				* SMSHOSTLIB_DEVICE_MODES_E
-				*
-				* This field MUST always be first in any
-				* statistics structure */
-
-	u32 FullSize; /* Total size of the structure returned by the modem.
-		       * If the size requested by the host is smaller than
-		       * FullSize, the struct will be truncated */
-
-	/* Common parameters */
-	u32 IsRfLocked; /* 0 - not locked, 1 - locked */
-	u32 IsDemodLocked; /* 0 - not locked, 1 - locked */
-	u32 IsExternalLNAOn; /* 0 - external LNA off, 1 - external LNA on */
-
-	/* Reception quality */
-	s32  SNR; /* dB */
-	s32  RSSI; /* dBm */
-	s32  InBandPwr; /* In band power in dBM */
-	s32  CarrierOffset; /* Carrier Offset in Hz */
-
-	/* Transmission parameters */
-	u32 Frequency; /* Frequency in Hz */
-	u32 Bandwidth; /* Bandwidth in MHz */
-	u32 TransmissionMode; /* ISDB-T transmission mode */
-	u32 ModemState; /* 0 - Acquisition, 1 - Locked */
-	u32 GuardInterval; /* Guard Interval, 1 divided by value */
-	u32 SystemType; /* ISDB-T system type (ISDB-T / ISDB-Tsb) */
-	u32 PartialReception; /* TRUE - partial reception, FALSE otherwise */
-	u32 NumOfLayers; /* Number of ISDB-T layers in the network */
-
-	/* Per-layer information */
-	/* Layers A, B and C */
-	struct SMSHOSTLIB_ISDBT_LAYER_STAT_ST	LayerInfo[3];
-	/* Per-layer statistics, see SMSHOSTLIB_ISDBT_LAYER_STAT_ST */
-
-	/* Interface information */
-	u32 SmsToHostTxErrors; /* Total number of transmission errors. */
-};
-
-struct PID_STATISTICS_DATA_S {
-	struct PID_BURST_S {
-		u32 size;
-		u32 padding_cols;
-		u32 punct_cols;
-		u32 duration;
-		u32 cycle;
-		u32 calc_cycle;
-	} burst;
-
-	u32 tot_tbl_cnt;
-	u32 invalid_tbl_cnt;
-	u32 tot_cor_tbl;
-};
-
-struct PID_DATA_S {
-	u32 pid;
-	u32 num_rows;
-	struct PID_STATISTICS_DATA_S pid_statistics;
-};
-
-#define CORRECT_STAT_RSSI(_stat) ((_stat).RSSI *= -1)
-#define CORRECT_STAT_BANDWIDTH(_stat) (_stat.Bandwidth = 8 - _stat.Bandwidth)
-#define CORRECT_STAT_TRANSMISSON_MODE(_stat) \
-	if (_stat.TransmissionMode == 0) \
-		_stat.TransmissionMode = 2; \
-	else if (_stat.TransmissionMode == 1) \
-		_stat.TransmissionMode = 8; \
-		else \
-			_stat.TransmissionMode = 4;
-
-struct TRANSMISSION_STATISTICS_S {
-	u32 Frequency;		/* Frequency in Hz */
-	u32 Bandwidth;		/* Bandwidth in MHz */
-	u32 TransmissionMode;	/* FFT mode carriers in Kilos */
-	u32 GuardInterval;	/* Guard Interval from
-	SMSHOSTLIB_GUARD_INTERVALS_ET */
-	u32 CodeRate;		/* Code Rate from SMSHOSTLIB_CODE_RATE_ET */
-	u32 LPCodeRate;		/* Low Priority Code Rate from
-	SMSHOSTLIB_CODE_RATE_ET */
-	u32 Hierarchy;		/* Hierarchy from SMSHOSTLIB_HIERARCHY_ET */
-	u32 Constellation;	/* Constellation from
-	SMSHOSTLIB_CONSTELLATION_ET */
-
-	/* DVB-H TPS parameters */
-	u32 CellId;		/* TPS Cell ID in bits 15..0, bits 31..16 zero;
-	 if set to 0xFFFFFFFF cell_id not yet recovered */
-	u32 DvbhSrvIndHP;	/* DVB-H service indication info, bit 1 -
-	 Time Slicing indicator, bit 0 - MPE-FEC indicator */
-	u32 DvbhSrvIndLP;	/* DVB-H service indication info, bit 1 -
-	 Time Slicing indicator, bit 0 - MPE-FEC indicator */
-	u32 IsDemodLocked;	/* 0 - not locked, 1 - locked */
-};
-
-struct RECEPTION_STATISTICS_S {
-	u32 IsRfLocked;		/* 0 - not locked, 1 - locked */
-	u32 IsDemodLocked;	/* 0 - not locked, 1 - locked */
-	u32 IsExternalLNAOn;	/* 0 - external LNA off, 1 - external LNA on */
-
-	u32 ModemState;		/* from SMSHOSTLIB_DVB_MODEM_STATE_ET */
-	s32 SNR;		/* dB */
-	u32 BER;		/* Post Viterbi BER [1E-5] */
-	u32 BERErrorCount;	/* Number of erronous SYNC bits. */
-	u32 BERBitCount;	/* Total number of SYNC bits. */
-	u32 TS_PER;		/* Transport stream PER,
-	0xFFFFFFFF indicate N/A */
-	u32 MFER;		/* DVB-H frame error rate in percentage,
-	0xFFFFFFFF indicate N/A, valid only for DVB-H */
-	s32 RSSI;		/* dBm */
-	s32 InBandPwr;		/* In band power in dBM */
-	s32 CarrierOffset;	/* Carrier Offset in bin/1024 */
-	u32 ErrorTSPackets;	/* Number of erroneous
-	transport-stream packets */
-	u32 TotalTSPackets;	/* Total number of transport-stream packets */
-
-	s32 MRC_SNR;		/* dB */
-	s32 MRC_RSSI;		/* dBm */
-	s32 MRC_InBandPwr;	/* In band power in dBM */
-};
-
-
-/* Statistics information returned as response for
- * SmsHostApiGetStatisticsEx_Req for DVB applications, SMS1100 and up */
-struct SMSHOSTLIB_STATISTICS_DVB_S {
-	/* Reception */
-	struct RECEPTION_STATISTICS_S ReceptionData;
-
-	/* Transmission parameters */
-	struct TRANSMISSION_STATISTICS_S TransmissionData;
-
-	/* Burst parameters, valid only for DVB-H */
-#define	SRVM_MAX_PID_FILTERS 8
-	struct PID_DATA_S PidData[SRVM_MAX_PID_FILTERS];
-};
-
-struct SRVM_SIGNAL_STATUS_S {
-	u32 result;
-	u32 snr;
-	u32 tsPackets;
-	u32 etsPackets;
-	u32 constellation;
-	u32 hpCode;
-	u32 tpsSrvIndLP;
-	u32 tpsSrvIndHP;
-	u32 cellId;
-	u32 reason;
-
-	s32 inBandPower;
-	u32 requestId;
-};
-
-struct SMSHOSTLIB_I2C_REQ_ST {
-	u32	DeviceAddress; /* I2c device address */
-	u32	WriteCount; /* number of bytes to write */
-	u32	ReadCount; /* number of bytes to read */
-	u8	Data[1];
-};
-
-struct SMSHOSTLIB_I2C_RES_ST {
-	u32	Status; /* non-zero value in case of failure */
-	u32	ReadCount; /* number of bytes read */
-	u8	Data[1];
-};
-
-
-struct smscore_config_gpio {
-#define SMS_GPIO_DIRECTION_INPUT  0
-#define SMS_GPIO_DIRECTION_OUTPUT 1
-	u8 direction;
-
-#define SMS_GPIO_PULLUPDOWN_NONE     0
-#define SMS_GPIO_PULLUPDOWN_PULLDOWN 1
-#define SMS_GPIO_PULLUPDOWN_PULLUP   2
-#define SMS_GPIO_PULLUPDOWN_KEEPER   3
-	u8 pullupdown;
-
-#define SMS_GPIO_INPUTCHARACTERISTICS_NORMAL  0
-#define SMS_GPIO_INPUTCHARACTERISTICS_SCHMITT 1
-	u8 inputcharacteristics;
-
-#define SMS_GPIO_OUTPUTSLEWRATE_FAST 0
-#define SMS_GPIO_OUTPUTSLEWRATE_SLOW 1
-	u8 outputslewrate;
-
-#define SMS_GPIO_OUTPUTDRIVING_4mA  0
-#define SMS_GPIO_OUTPUTDRIVING_8mA  1
-#define SMS_GPIO_OUTPUTDRIVING_12mA 2
-#define SMS_GPIO_OUTPUTDRIVING_16mA 3
-	u8 outputdriving;
-};
-
-struct smscore_gpio_config {
-#define SMS_GPIO_DIRECTION_INPUT  0
-#define SMS_GPIO_DIRECTION_OUTPUT 1
-	u8 Direction;
-
-#define SMS_GPIO_PULL_UP_DOWN_NONE     0
-#define SMS_GPIO_PULL_UP_DOWN_PULLDOWN 1
-#define SMS_GPIO_PULL_UP_DOWN_PULLUP   2
-#define SMS_GPIO_PULL_UP_DOWN_KEEPER   3
-	u8 PullUpDown;
-
-#define SMS_GPIO_INPUT_CHARACTERISTICS_NORMAL  0
-#define SMS_GPIO_INPUT_CHARACTERISTICS_SCHMITT 1
-	u8 InputCharacteristics;
-
-#define SMS_GPIO_OUTPUT_SLEW_RATE_SLOW		1 /* 10xx */
-#define SMS_GPIO_OUTPUT_SLEW_RATE_FAST		0 /* 10xx */
-
-
-#define SMS_GPIO_OUTPUT_SLEW_RATE_0_45_V_NS	0 /* 11xx */
-#define SMS_GPIO_OUTPUT_SLEW_RATE_0_9_V_NS	1 /* 11xx */
-#define SMS_GPIO_OUTPUT_SLEW_RATE_1_7_V_NS	2 /* 11xx */
-#define SMS_GPIO_OUTPUT_SLEW_RATE_3_3_V_NS	3 /* 11xx */
-	u8 OutputSlewRate;
-
-#define SMS_GPIO_OUTPUT_DRIVING_S_4mA		0 /* 10xx */
-#define SMS_GPIO_OUTPUT_DRIVING_S_8mA		1 /* 10xx */
-#define SMS_GPIO_OUTPUT_DRIVING_S_12mA		2 /* 10xx */
-#define SMS_GPIO_OUTPUT_DRIVING_S_16mA		3 /* 10xx */
-
-#define SMS_GPIO_OUTPUT_DRIVING_1_5mA		0 /* 11xx */
-#define SMS_GPIO_OUTPUT_DRIVING_2_8mA		1 /* 11xx */
-#define SMS_GPIO_OUTPUT_DRIVING_4mA		2 /* 11xx */
-#define SMS_GPIO_OUTPUT_DRIVING_7mA		3 /* 11xx */
-#define SMS_GPIO_OUTPUT_DRIVING_10mA		4 /* 11xx */
-#define SMS_GPIO_OUTPUT_DRIVING_11mA		5 /* 11xx */
-#define SMS_GPIO_OUTPUT_DRIVING_14mA		6 /* 11xx */
-#define SMS_GPIO_OUTPUT_DRIVING_16mA		7 /* 11xx */
-	u8 OutputDriving;
-};
-
-extern void smscore_registry_setmode(char *devpath, int mode);
-extern int smscore_registry_getmode(char *devpath);
-
-extern int smscore_register_hotplug(hotplug_t hotplug);
-extern void smscore_unregister_hotplug(hotplug_t hotplug);
-
-extern int smscore_register_device(struct smsdevice_params_t *params,
-				   struct smscore_device_t **coredev);
-extern void smscore_unregister_device(struct smscore_device_t *coredev);
-
-extern int smscore_start_device(struct smscore_device_t *coredev);
-extern int smscore_load_firmware(struct smscore_device_t *coredev,
-				 char *filename,
-				 loadfirmware_t loadfirmware_handler);
-
-extern int smscore_set_device_mode(struct smscore_device_t *coredev, int mode);
-extern int smscore_get_device_mode(struct smscore_device_t *coredev);
-
-extern int smscore_register_client(struct smscore_device_t *coredev,
-				    struct smsclient_params_t *params,
-				    struct smscore_client_t **client);
-extern void smscore_unregister_client(struct smscore_client_t *client);
-
-extern int smsclient_sendrequest(struct smscore_client_t *client,
-				 void *buffer, size_t size);
-extern void smscore_onresponse(struct smscore_device_t *coredev,
-			       struct smscore_buffer_t *cb);
-
-extern int smscore_get_common_buffer_size(struct smscore_device_t *coredev);
-extern int smscore_map_common_buffer(struct smscore_device_t *coredev,
-				      struct vm_area_struct *vma);
-extern int smscore_get_fw_filename(struct smscore_device_t *coredev,
-				   int mode, char *filename);
-extern int smscore_send_fw_file(struct smscore_device_t *coredev,
-				u8 *ufwbuf, int size);
-
-extern
-struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev);
-extern void smscore_putbuffer(struct smscore_device_t *coredev,
-			      struct smscore_buffer_t *cb);
-
-/* old GPIO management */
-int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin,
-			   struct smscore_config_gpio *pinconfig);
-int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level);
-
-/* new GPIO management */
-extern int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum,
-		struct smscore_gpio_config *pGpioConfig);
-extern int smscore_gpio_set_level(struct smscore_device_t *coredev, u8 PinNum,
-		u8 NewLevel);
-extern int smscore_gpio_get_level(struct smscore_device_t *coredev, u8 PinNum,
-		u8 *level);
-
-void smscore_set_board_id(struct smscore_device_t *core, int id);
-int smscore_get_board_id(struct smscore_device_t *core);
-
-int smscore_led_state(struct smscore_device_t *core, int led);
-
-
-/* ------------------------------------------------------------------------ */
-
-#define DBG_INFO 1
-#define DBG_ADV  2
-
-#define sms_printk(kern, fmt, arg...) \
-	printk(kern "%s: " fmt "\n", __func__, ##arg)
-
-#define dprintk(kern, lvl, fmt, arg...) do {\
-	if (sms_dbg & lvl) \
-		sms_printk(kern, fmt, ##arg); } while (0)
-
-#define sms_log(fmt, arg...) sms_printk(KERN_INFO, fmt, ##arg)
-#define sms_err(fmt, arg...) \
-	sms_printk(KERN_ERR, "line: %d: " fmt, __LINE__, ##arg)
-#define sms_warn(fmt, arg...)  sms_printk(KERN_WARNING, fmt, ##arg)
-#define sms_info(fmt, arg...) \
-	dprintk(KERN_INFO, DBG_INFO, fmt, ##arg)
-#define sms_debug(fmt, arg...) \
-	dprintk(KERN_DEBUG, DBG_ADV, fmt, ##arg)
-
-
-#endif /* __SMS_CORE_API_H__ */
diff --git a/drivers/media/dvb/siano/smsdvb.c b/drivers/media/dvb/siano/smsdvb.c
deleted file mode 100644
index aa77e54..0000000
--- a/drivers/media/dvb/siano/smsdvb.c
+++ /dev/null
@@ -1,1078 +0,0 @@
-/****************************************************************
-
-Siano Mobile Silicon, Inc.
-MDTV receiver kernel modules.
-Copyright (C) 2006-2008, Uri Shkolnik
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-****************************************************************/
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-
-#include "smscoreapi.h"
-#include "smsendian.h"
-#include "sms-cards.h"
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-struct smsdvb_client_t {
-	struct list_head entry;
-
-	struct smscore_device_t *coredev;
-	struct smscore_client_t *smsclient;
-
-	struct dvb_adapter      adapter;
-	struct dvb_demux        demux;
-	struct dmxdev           dmxdev;
-	struct dvb_frontend     frontend;
-
-	fe_status_t             fe_status;
-
-	struct completion       tune_done;
-
-	struct SMSHOSTLIB_STATISTICS_DVB_S sms_stat_dvb;
-	int event_fe_state;
-	int event_unc_state;
-};
-
-static struct list_head g_smsdvb_clients;
-static struct mutex g_smsdvb_clientslock;
-
-static int sms_dbg;
-module_param_named(debug, sms_dbg, int, 0644);
-MODULE_PARM_DESC(debug, "set debug level (info=1, adv=2 (or-able))");
-
-/* Events that may come from DVB v3 adapter */
-static void sms_board_dvb3_event(struct smsdvb_client_t *client,
-		enum SMS_DVB3_EVENTS event) {
-
-	struct smscore_device_t *coredev = client->coredev;
-	switch (event) {
-	case DVB3_EVENT_INIT:
-		sms_debug("DVB3_EVENT_INIT");
-		sms_board_event(coredev, BOARD_EVENT_BIND);
-		break;
-	case DVB3_EVENT_SLEEP:
-		sms_debug("DVB3_EVENT_SLEEP");
-		sms_board_event(coredev, BOARD_EVENT_POWER_SUSPEND);
-		break;
-	case DVB3_EVENT_HOTPLUG:
-		sms_debug("DVB3_EVENT_HOTPLUG");
-		sms_board_event(coredev, BOARD_EVENT_POWER_INIT);
-		break;
-	case DVB3_EVENT_FE_LOCK:
-		if (client->event_fe_state != DVB3_EVENT_FE_LOCK) {
-			client->event_fe_state = DVB3_EVENT_FE_LOCK;
-			sms_debug("DVB3_EVENT_FE_LOCK");
-			sms_board_event(coredev, BOARD_EVENT_FE_LOCK);
-		}
-		break;
-	case DVB3_EVENT_FE_UNLOCK:
-		if (client->event_fe_state != DVB3_EVENT_FE_UNLOCK) {
-			client->event_fe_state = DVB3_EVENT_FE_UNLOCK;
-			sms_debug("DVB3_EVENT_FE_UNLOCK");
-			sms_board_event(coredev, BOARD_EVENT_FE_UNLOCK);
-		}
-		break;
-	case DVB3_EVENT_UNC_OK:
-		if (client->event_unc_state != DVB3_EVENT_UNC_OK) {
-			client->event_unc_state = DVB3_EVENT_UNC_OK;
-			sms_debug("DVB3_EVENT_UNC_OK");
-			sms_board_event(coredev, BOARD_EVENT_MULTIPLEX_OK);
-		}
-		break;
-	case DVB3_EVENT_UNC_ERR:
-		if (client->event_unc_state != DVB3_EVENT_UNC_ERR) {
-			client->event_unc_state = DVB3_EVENT_UNC_ERR;
-			sms_debug("DVB3_EVENT_UNC_ERR");
-			sms_board_event(coredev, BOARD_EVENT_MULTIPLEX_ERRORS);
-		}
-		break;
-
-	default:
-		sms_err("Unknown dvb3 api event");
-		break;
-	}
-}
-
-
-static void smsdvb_update_dvb_stats(struct RECEPTION_STATISTICS_S *pReceptionData,
-				   struct SMSHOSTLIB_STATISTICS_ST *p)
-{
-	if (sms_dbg & 2) {
-		printk(KERN_DEBUG "Reserved = %d", p->Reserved);
-		printk(KERN_DEBUG "IsRfLocked = %d", p->IsRfLocked);
-		printk(KERN_DEBUG "IsDemodLocked = %d", p->IsDemodLocked);
-		printk(KERN_DEBUG "IsExternalLNAOn = %d", p->IsExternalLNAOn);
-		printk(KERN_DEBUG "SNR = %d", p->SNR);
-		printk(KERN_DEBUG "BER = %d", p->BER);
-		printk(KERN_DEBUG "FIB_CRC = %d", p->FIB_CRC);
-		printk(KERN_DEBUG "TS_PER = %d", p->TS_PER);
-		printk(KERN_DEBUG "MFER = %d", p->MFER);
-		printk(KERN_DEBUG "RSSI = %d", p->RSSI);
-		printk(KERN_DEBUG "InBandPwr = %d", p->InBandPwr);
-		printk(KERN_DEBUG "CarrierOffset = %d", p->CarrierOffset);
-		printk(KERN_DEBUG "Frequency = %d", p->Frequency);
-		printk(KERN_DEBUG "Bandwidth = %d", p->Bandwidth);
-		printk(KERN_DEBUG "TransmissionMode = %d", p->TransmissionMode);
-		printk(KERN_DEBUG "ModemState = %d", p->ModemState);
-		printk(KERN_DEBUG "GuardInterval = %d", p->GuardInterval);
-		printk(KERN_DEBUG "CodeRate = %d", p->CodeRate);
-		printk(KERN_DEBUG "LPCodeRate = %d", p->LPCodeRate);
-		printk(KERN_DEBUG "Hierarchy = %d", p->Hierarchy);
-		printk(KERN_DEBUG "Constellation = %d", p->Constellation);
-		printk(KERN_DEBUG "BurstSize = %d", p->BurstSize);
-		printk(KERN_DEBUG "BurstDuration = %d", p->BurstDuration);
-		printk(KERN_DEBUG "BurstCycleTime = %d", p->BurstCycleTime);
-		printk(KERN_DEBUG "CalculatedBurstCycleTime = %d", p->CalculatedBurstCycleTime);
-		printk(KERN_DEBUG "NumOfRows = %d", p->NumOfRows);
-		printk(KERN_DEBUG "NumOfPaddCols = %d", p->NumOfPaddCols);
-		printk(KERN_DEBUG "NumOfPunctCols = %d", p->NumOfPunctCols);
-		printk(KERN_DEBUG "ErrorTSPackets = %d", p->ErrorTSPackets);
-		printk(KERN_DEBUG "TotalTSPackets = %d", p->TotalTSPackets);
-		printk(KERN_DEBUG "NumOfValidMpeTlbs = %d", p->NumOfValidMpeTlbs);
-		printk(KERN_DEBUG "NumOfInvalidMpeTlbs = %d", p->NumOfInvalidMpeTlbs);
-		printk(KERN_DEBUG "NumOfCorrectedMpeTlbs = %d", p->NumOfCorrectedMpeTlbs);
-		printk(KERN_DEBUG "BERErrorCount = %d", p->BERErrorCount);
-		printk(KERN_DEBUG "BERBitCount = %d", p->BERBitCount);
-		printk(KERN_DEBUG "SmsToHostTxErrors = %d", p->SmsToHostTxErrors);
-		printk(KERN_DEBUG "PreBER = %d", p->PreBER);
-		printk(KERN_DEBUG "CellId = %d", p->CellId);
-		printk(KERN_DEBUG "DvbhSrvIndHP = %d", p->DvbhSrvIndHP);
-		printk(KERN_DEBUG "DvbhSrvIndLP = %d", p->DvbhSrvIndLP);
-		printk(KERN_DEBUG "NumMPEReceived = %d", p->NumMPEReceived);
-	}
-
-	pReceptionData->IsDemodLocked = p->IsDemodLocked;
-
-	pReceptionData->SNR = p->SNR;
-	pReceptionData->BER = p->BER;
-	pReceptionData->BERErrorCount = p->BERErrorCount;
-	pReceptionData->InBandPwr = p->InBandPwr;
-	pReceptionData->ErrorTSPackets = p->ErrorTSPackets;
-};
-
-
-static void smsdvb_update_isdbt_stats(struct RECEPTION_STATISTICS_S *pReceptionData,
-				    struct SMSHOSTLIB_STATISTICS_ISDBT_ST *p)
-{
-	int i;
-
-	if (sms_dbg & 2) {
-		printk(KERN_DEBUG "IsRfLocked = %d", p->IsRfLocked);
-		printk(KERN_DEBUG "IsDemodLocked = %d", p->IsDemodLocked);
-		printk(KERN_DEBUG "IsExternalLNAOn = %d", p->IsExternalLNAOn);
-		printk(KERN_DEBUG "SNR = %d", p->SNR);
-		printk(KERN_DEBUG "RSSI = %d", p->RSSI);
-		printk(KERN_DEBUG "InBandPwr = %d", p->InBandPwr);
-		printk(KERN_DEBUG "CarrierOffset = %d", p->CarrierOffset);
-		printk(KERN_DEBUG "Frequency = %d", p->Frequency);
-		printk(KERN_DEBUG "Bandwidth = %d", p->Bandwidth);
-		printk(KERN_DEBUG "TransmissionMode = %d", p->TransmissionMode);
-		printk(KERN_DEBUG "ModemState = %d", p->ModemState);
-		printk(KERN_DEBUG "GuardInterval = %d", p->GuardInterval);
-		printk(KERN_DEBUG "SystemType = %d", p->SystemType);
-		printk(KERN_DEBUG "PartialReception = %d", p->PartialReception);
-		printk(KERN_DEBUG "NumOfLayers = %d", p->NumOfLayers);
-		printk(KERN_DEBUG "SmsToHostTxErrors = %d", p->SmsToHostTxErrors);
-
-		for (i = 0; i < 3; i++) {
-			printk(KERN_DEBUG "%d: CodeRate = %d", i, p->LayerInfo[i].CodeRate);
-			printk(KERN_DEBUG "%d: Constellation = %d", i, p->LayerInfo[i].Constellation);
-			printk(KERN_DEBUG "%d: BER = %d", i, p->LayerInfo[i].BER);
-			printk(KERN_DEBUG "%d: BERErrorCount = %d", i, p->LayerInfo[i].BERErrorCount);
-			printk(KERN_DEBUG "%d: BERBitCount = %d", i, p->LayerInfo[i].BERBitCount);
-			printk(KERN_DEBUG "%d: PreBER = %d", i, p->LayerInfo[i].PreBER);
-			printk(KERN_DEBUG "%d: TS_PER = %d", i, p->LayerInfo[i].TS_PER);
-			printk(KERN_DEBUG "%d: ErrorTSPackets = %d", i, p->LayerInfo[i].ErrorTSPackets);
-			printk(KERN_DEBUG "%d: TotalTSPackets = %d", i, p->LayerInfo[i].TotalTSPackets);
-			printk(KERN_DEBUG "%d: TILdepthI = %d", i, p->LayerInfo[i].TILdepthI);
-			printk(KERN_DEBUG "%d: NumberOfSegments = %d", i, p->LayerInfo[i].NumberOfSegments);
-			printk(KERN_DEBUG "%d: TMCCErrors = %d", i, p->LayerInfo[i].TMCCErrors);
-		}
-	}
-
-	pReceptionData->IsDemodLocked = p->IsDemodLocked;
-
-	pReceptionData->SNR = p->SNR;
-	pReceptionData->InBandPwr = p->InBandPwr;
-
-	pReceptionData->ErrorTSPackets = 0;
-	pReceptionData->BER = 0;
-	pReceptionData->BERErrorCount = 0;
-	for (i = 0; i < 3; i++) {
-		pReceptionData->BER += p->LayerInfo[i].BER;
-		pReceptionData->BERErrorCount += p->LayerInfo[i].BERErrorCount;
-		pReceptionData->ErrorTSPackets += p->LayerInfo[i].ErrorTSPackets;
-	}
-}
-
-static int smsdvb_onresponse(void *context, struct smscore_buffer_t *cb)
-{
-	struct smsdvb_client_t *client = (struct smsdvb_client_t *) context;
-	struct SmsMsgHdr_ST *phdr = (struct SmsMsgHdr_ST *) (((u8 *) cb->p)
-			+ cb->offset);
-	u32 *pMsgData = (u32 *) phdr + 1;
-	/*u32 MsgDataLen = phdr->msgLength - sizeof(struct SmsMsgHdr_ST);*/
-	bool is_status_update = false;
-
-	smsendian_handle_rx_message((struct SmsMsgData_ST *) phdr);
-
-	switch (phdr->msgType) {
-	case MSG_SMS_DVBT_BDA_DATA:
-		dvb_dmx_swfilter(&client->demux, (u8 *)(phdr + 1),
-				 cb->size - sizeof(struct SmsMsgHdr_ST));
-		break;
-
-	case MSG_SMS_RF_TUNE_RES:
-	case MSG_SMS_ISDBT_TUNE_RES:
-		complete(&client->tune_done);
-		break;
-
-	case MSG_SMS_SIGNAL_DETECTED_IND:
-		sms_info("MSG_SMS_SIGNAL_DETECTED_IND");
-		client->sms_stat_dvb.TransmissionData.IsDemodLocked = true;
-		is_status_update = true;
-		break;
-
-	case MSG_SMS_NO_SIGNAL_IND:
-		sms_info("MSG_SMS_NO_SIGNAL_IND");
-		client->sms_stat_dvb.TransmissionData.IsDemodLocked = false;
-		is_status_update = true;
-		break;
-
-	case MSG_SMS_TRANSMISSION_IND: {
-		sms_info("MSG_SMS_TRANSMISSION_IND");
-
-		pMsgData++;
-		memcpy(&client->sms_stat_dvb.TransmissionData, pMsgData,
-				sizeof(struct TRANSMISSION_STATISTICS_S));
-
-		/* Mo need to correct guard interval
-		 * (as opposed to old statistics message).
-		 */
-		CORRECT_STAT_BANDWIDTH(client->sms_stat_dvb.TransmissionData);
-		CORRECT_STAT_TRANSMISSON_MODE(
-				client->sms_stat_dvb.TransmissionData);
-		is_status_update = true;
-		break;
-	}
-	case MSG_SMS_HO_PER_SLICES_IND: {
-		struct RECEPTION_STATISTICS_S *pReceptionData =
-				&client->sms_stat_dvb.ReceptionData;
-		struct SRVM_SIGNAL_STATUS_S SignalStatusData;
-
-		/*sms_info("MSG_SMS_HO_PER_SLICES_IND");*/
-		pMsgData++;
-		SignalStatusData.result = pMsgData[0];
-		SignalStatusData.snr = pMsgData[1];
-		SignalStatusData.inBandPower = (s32) pMsgData[2];
-		SignalStatusData.tsPackets = pMsgData[3];
-		SignalStatusData.etsPackets = pMsgData[4];
-		SignalStatusData.constellation = pMsgData[5];
-		SignalStatusData.hpCode = pMsgData[6];
-		SignalStatusData.tpsSrvIndLP = pMsgData[7] & 0x03;
-		SignalStatusData.tpsSrvIndHP = pMsgData[8] & 0x03;
-		SignalStatusData.cellId = pMsgData[9] & 0xFFFF;
-		SignalStatusData.reason = pMsgData[10];
-		SignalStatusData.requestId = pMsgData[11];
-		pReceptionData->IsRfLocked = pMsgData[16];
-		pReceptionData->IsDemodLocked = pMsgData[17];
-		pReceptionData->ModemState = pMsgData[12];
-		pReceptionData->SNR = pMsgData[1];
-		pReceptionData->BER = pMsgData[13];
-		pReceptionData->RSSI = pMsgData[14];
-		CORRECT_STAT_RSSI(client->sms_stat_dvb.ReceptionData);
-
-		pReceptionData->InBandPwr = (s32) pMsgData[2];
-		pReceptionData->CarrierOffset = (s32) pMsgData[15];
-		pReceptionData->TotalTSPackets = pMsgData[3];
-		pReceptionData->ErrorTSPackets = pMsgData[4];
-
-		/* TS PER */
-		if ((SignalStatusData.tsPackets + SignalStatusData.etsPackets)
-				> 0) {
-			pReceptionData->TS_PER = (SignalStatusData.etsPackets
-					* 100) / (SignalStatusData.tsPackets
-					+ SignalStatusData.etsPackets);
-		} else {
-			pReceptionData->TS_PER = 0;
-		}
-
-		pReceptionData->BERBitCount = pMsgData[18];
-		pReceptionData->BERErrorCount = pMsgData[19];
-
-		pReceptionData->MRC_SNR = pMsgData[20];
-		pReceptionData->MRC_InBandPwr = pMsgData[21];
-		pReceptionData->MRC_RSSI = pMsgData[22];
-
-		is_status_update = true;
-		break;
-	}
-	case MSG_SMS_GET_STATISTICS_RES: {
-		union {
-			struct SMSHOSTLIB_STATISTICS_ISDBT_ST  isdbt;
-			struct SmsMsgStatisticsInfo_ST         dvb;
-		} *p = (void *) (phdr + 1);
-		struct RECEPTION_STATISTICS_S *pReceptionData =
-				&client->sms_stat_dvb.ReceptionData;
-
-		sms_info("MSG_SMS_GET_STATISTICS_RES");
-
-		is_status_update = true;
-
-		switch (smscore_get_device_mode(client->coredev)) {
-		case DEVICE_MODE_ISDBT:
-		case DEVICE_MODE_ISDBT_BDA:
-			smsdvb_update_isdbt_stats(pReceptionData, &p->isdbt);
-			break;
-		default:
-			smsdvb_update_dvb_stats(pReceptionData, &p->dvb.Stat);
-		}
-		if (!pReceptionData->IsDemodLocked) {
-			pReceptionData->SNR = 0;
-			pReceptionData->BER = 0;
-			pReceptionData->BERErrorCount = 0;
-			pReceptionData->InBandPwr = 0;
-			pReceptionData->ErrorTSPackets = 0;
-		}
-
-		complete(&client->tune_done);
-		break;
-	}
-	default:
-		sms_info("Unhandled message %d", phdr->msgType);
-
-	}
-	smscore_putbuffer(client->coredev, cb);
-
-	if (is_status_update) {
-		if (client->sms_stat_dvb.ReceptionData.IsDemodLocked) {
-			client->fe_status = FE_HAS_SIGNAL | FE_HAS_CARRIER
-				| FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
-			sms_board_dvb3_event(client, DVB3_EVENT_FE_LOCK);
-			if (client->sms_stat_dvb.ReceptionData.ErrorTSPackets
-					== 0)
-				sms_board_dvb3_event(client, DVB3_EVENT_UNC_OK);
-			else
-				sms_board_dvb3_event(client,
-						DVB3_EVENT_UNC_ERR);
-
-		} else {
-			if (client->sms_stat_dvb.ReceptionData.IsRfLocked)
-				client->fe_status = FE_HAS_SIGNAL | FE_HAS_CARRIER;
-			else
-				client->fe_status = 0;
-			sms_board_dvb3_event(client, DVB3_EVENT_FE_UNLOCK);
-		}
-	}
-
-	return 0;
-}
-
-static void smsdvb_unregister_client(struct smsdvb_client_t *client)
-{
-	/* must be called under clientslock */
-
-	list_del(&client->entry);
-
-	smscore_unregister_client(client->smsclient);
-	dvb_unregister_frontend(&client->frontend);
-	dvb_dmxdev_release(&client->dmxdev);
-	dvb_dmx_release(&client->demux);
-	dvb_unregister_adapter(&client->adapter);
-	kfree(client);
-}
-
-static void smsdvb_onremove(void *context)
-{
-	kmutex_lock(&g_smsdvb_clientslock);
-
-	smsdvb_unregister_client((struct smsdvb_client_t *) context);
-
-	kmutex_unlock(&g_smsdvb_clientslock);
-}
-
-static int smsdvb_start_feed(struct dvb_demux_feed *feed)
-{
-	struct smsdvb_client_t *client =
-		container_of(feed->demux, struct smsdvb_client_t, demux);
-	struct SmsMsgData_ST PidMsg;
-
-	sms_debug("add pid %d(%x)",
-		  feed->pid, feed->pid);
-
-	PidMsg.xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
-	PidMsg.xMsgHeader.msgDstId = HIF_TASK;
-	PidMsg.xMsgHeader.msgFlags = 0;
-	PidMsg.xMsgHeader.msgType  = MSG_SMS_ADD_PID_FILTER_REQ;
-	PidMsg.xMsgHeader.msgLength = sizeof(PidMsg);
-	PidMsg.msgData[0] = feed->pid;
-
-	smsendian_handle_tx_message((struct SmsMsgHdr_ST *)&PidMsg);
-	return smsclient_sendrequest(client->smsclient,
-				     &PidMsg, sizeof(PidMsg));
-}
-
-static int smsdvb_stop_feed(struct dvb_demux_feed *feed)
-{
-	struct smsdvb_client_t *client =
-		container_of(feed->demux, struct smsdvb_client_t, demux);
-	struct SmsMsgData_ST PidMsg;
-
-	sms_debug("remove pid %d(%x)",
-		  feed->pid, feed->pid);
-
-	PidMsg.xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
-	PidMsg.xMsgHeader.msgDstId = HIF_TASK;
-	PidMsg.xMsgHeader.msgFlags = 0;
-	PidMsg.xMsgHeader.msgType  = MSG_SMS_REMOVE_PID_FILTER_REQ;
-	PidMsg.xMsgHeader.msgLength = sizeof(PidMsg);
-	PidMsg.msgData[0] = feed->pid;
-
-	smsendian_handle_tx_message((struct SmsMsgHdr_ST *)&PidMsg);
-	return smsclient_sendrequest(client->smsclient,
-				     &PidMsg, sizeof(PidMsg));
-}
-
-static int smsdvb_sendrequest_and_wait(struct smsdvb_client_t *client,
-					void *buffer, size_t size,
-					struct completion *completion)
-{
-	int rc;
-
-	smsendian_handle_tx_message((struct SmsMsgHdr_ST *)buffer);
-	rc = smsclient_sendrequest(client->smsclient, buffer, size);
-	if (rc < 0)
-		return rc;
-
-	return wait_for_completion_timeout(completion,
-					   msecs_to_jiffies(2000)) ?
-						0 : -ETIME;
-}
-
-static int smsdvb_send_statistics_request(struct smsdvb_client_t *client)
-{
-	int rc;
-	struct SmsMsgHdr_ST Msg = { MSG_SMS_GET_STATISTICS_REQ,
-				    DVBT_BDA_CONTROL_MSG_ID,
-				    HIF_TASK,
-				    sizeof(struct SmsMsgHdr_ST), 0 };
-
-	rc = smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
-					  &client->tune_done);
-
-	return rc;
-}
-
-static inline int led_feedback(struct smsdvb_client_t *client)
-{
-	if (client->fe_status & FE_HAS_LOCK)
-		return sms_board_led_feedback(client->coredev,
-			(client->sms_stat_dvb.ReceptionData.BER
-			== 0) ? SMS_LED_HI : SMS_LED_LO);
-	else
-		return sms_board_led_feedback(client->coredev, SMS_LED_OFF);
-}
-
-static int smsdvb_read_status(struct dvb_frontend *fe, fe_status_t *stat)
-{
-	int rc;
-	struct smsdvb_client_t *client;
-	client = container_of(fe, struct smsdvb_client_t, frontend);
-
-	rc = smsdvb_send_statistics_request(client);
-
-	*stat = client->fe_status;
-
-	led_feedback(client);
-
-	return rc;
-}
-
-static int smsdvb_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
-	int rc;
-	struct smsdvb_client_t *client;
-	client = container_of(fe, struct smsdvb_client_t, frontend);
-
-	rc = smsdvb_send_statistics_request(client);
-
-	*ber = client->sms_stat_dvb.ReceptionData.BER;
-
-	led_feedback(client);
-
-	return rc;
-}
-
-static int smsdvb_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
-{
-	int rc;
-
-	struct smsdvb_client_t *client;
-	client = container_of(fe, struct smsdvb_client_t, frontend);
-
-	rc = smsdvb_send_statistics_request(client);
-
-	if (client->sms_stat_dvb.ReceptionData.InBandPwr < -95)
-		*strength = 0;
-		else if (client->sms_stat_dvb.ReceptionData.InBandPwr > -29)
-			*strength = 100;
-		else
-			*strength =
-				(client->sms_stat_dvb.ReceptionData.InBandPwr
-				+ 95) * 3 / 2;
-
-	led_feedback(client);
-
-	return rc;
-}
-
-static int smsdvb_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
-	int rc;
-	struct smsdvb_client_t *client;
-	client = container_of(fe, struct smsdvb_client_t, frontend);
-
-	rc = smsdvb_send_statistics_request(client);
-
-	*snr = client->sms_stat_dvb.ReceptionData.SNR;
-
-	led_feedback(client);
-
-	return rc;
-}
-
-static int smsdvb_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
-	int rc;
-	struct smsdvb_client_t *client;
-	client = container_of(fe, struct smsdvb_client_t, frontend);
-
-	rc = smsdvb_send_statistics_request(client);
-
-	*ucblocks = client->sms_stat_dvb.ReceptionData.ErrorTSPackets;
-
-	led_feedback(client);
-
-	return rc;
-}
-
-static int smsdvb_get_tune_settings(struct dvb_frontend *fe,
-				    struct dvb_frontend_tune_settings *tune)
-{
-	sms_debug("");
-
-	tune->min_delay_ms = 400;
-	tune->step_size = 250000;
-	tune->max_drift = 0;
-	return 0;
-}
-
-static int smsdvb_dvbt_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct smsdvb_client_t *client =
-		container_of(fe, struct smsdvb_client_t, frontend);
-
-	struct {
-		struct SmsMsgHdr_ST	Msg;
-		u32		Data[3];
-	} Msg;
-
-	int ret;
-
-	client->fe_status = FE_HAS_SIGNAL;
-	client->event_fe_state = -1;
-	client->event_unc_state = -1;
-	fe->dtv_property_cache.delivery_system = SYS_DVBT;
-
-	Msg.Msg.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
-	Msg.Msg.msgDstId = HIF_TASK;
-	Msg.Msg.msgFlags = 0;
-	Msg.Msg.msgType = MSG_SMS_RF_TUNE_REQ;
-	Msg.Msg.msgLength = sizeof(Msg);
-	Msg.Data[0] = c->frequency;
-	Msg.Data[2] = 12000000;
-
-	sms_info("%s: freq %d band %d", __func__, c->frequency,
-		 c->bandwidth_hz);
-
-	switch (c->bandwidth_hz / 1000000) {
-	case 8:
-		Msg.Data[1] = BW_8_MHZ;
-		break;
-	case 7:
-		Msg.Data[1] = BW_7_MHZ;
-		break;
-	case 6:
-		Msg.Data[1] = BW_6_MHZ;
-		break;
-	case 0:
-		return -EOPNOTSUPP;
-	default:
-		return -EINVAL;
-	}
-	/* Disable LNA, if any. An error is returned if no LNA is present */
-	ret = sms_board_lna_control(client->coredev, 0);
-	if (ret == 0) {
-		fe_status_t status;
-
-		/* tune with LNA off at first */
-		ret = smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
-						  &client->tune_done);
-
-		smsdvb_read_status(fe, &status);
-
-		if (status & FE_HAS_LOCK)
-			return ret;
-
-		/* previous tune didn't lock - enable LNA and tune again */
-		sms_board_lna_control(client->coredev, 1);
-	}
-
-	return smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
-					   &client->tune_done);
-}
-
-static int smsdvb_isdbt_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct smsdvb_client_t *client =
-		container_of(fe, struct smsdvb_client_t, frontend);
-
-	struct {
-		struct SmsMsgHdr_ST	Msg;
-		u32		Data[4];
-	} Msg;
-
-	fe->dtv_property_cache.delivery_system = SYS_ISDBT;
-
-	Msg.Msg.msgSrcId  = DVBT_BDA_CONTROL_MSG_ID;
-	Msg.Msg.msgDstId  = HIF_TASK;
-	Msg.Msg.msgFlags  = 0;
-	Msg.Msg.msgType   = MSG_SMS_ISDBT_TUNE_REQ;
-	Msg.Msg.msgLength = sizeof(Msg);
-
-	if (c->isdbt_sb_segment_idx == -1)
-		c->isdbt_sb_segment_idx = 0;
-
-	switch (c->isdbt_sb_segment_count) {
-	case 3:
-		Msg.Data[1] = BW_ISDBT_3SEG;
-		break;
-	case 1:
-		Msg.Data[1] = BW_ISDBT_1SEG;
-		break;
-	case 0:	/* AUTO */
-		switch (c->bandwidth_hz / 1000000) {
-		case 8:
-		case 7:
-			c->isdbt_sb_segment_count = 3;
-			Msg.Data[1] = BW_ISDBT_3SEG;
-			break;
-		case 6:
-			c->isdbt_sb_segment_count = 1;
-			Msg.Data[1] = BW_ISDBT_1SEG;
-			break;
-		default: /* Assumes 6 MHZ bw */
-			c->isdbt_sb_segment_count = 1;
-			c->bandwidth_hz = 6000;
-			Msg.Data[1] = BW_ISDBT_1SEG;
-			break;
-		}
-		break;
-	default:
-		sms_info("Segment count %d not supported", c->isdbt_sb_segment_count);
-		return -EINVAL;
-	}
-
-	Msg.Data[0] = c->frequency;
-	Msg.Data[2] = 12000000;
-	Msg.Data[3] = c->isdbt_sb_segment_idx;
-
-	sms_info("%s: freq %d segwidth %d segindex %d\n", __func__,
-		 c->frequency, c->isdbt_sb_segment_count,
-		 c->isdbt_sb_segment_idx);
-
-	return smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
-					   &client->tune_done);
-}
-
-static int smsdvb_set_frontend(struct dvb_frontend *fe)
-{
-	struct smsdvb_client_t *client =
-		container_of(fe, struct smsdvb_client_t, frontend);
-	struct smscore_device_t *coredev = client->coredev;
-
-	switch (smscore_get_device_mode(coredev)) {
-	case DEVICE_MODE_DVBT:
-	case DEVICE_MODE_DVBT_BDA:
-		return smsdvb_dvbt_set_frontend(fe);
-	case DEVICE_MODE_ISDBT:
-	case DEVICE_MODE_ISDBT_BDA:
-		return smsdvb_isdbt_set_frontend(fe);
-	default:
-		return -EINVAL;
-	}
-}
-
-static int smsdvb_get_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
-	struct smsdvb_client_t *client =
-		container_of(fe, struct smsdvb_client_t, frontend);
-	struct smscore_device_t *coredev = client->coredev;
-	struct TRANSMISSION_STATISTICS_S *td =
-		&client->sms_stat_dvb.TransmissionData;
-
-	switch (smscore_get_device_mode(coredev)) {
-	case DEVICE_MODE_DVBT:
-	case DEVICE_MODE_DVBT_BDA:
-		fep->frequency = td->Frequency;
-
-		switch (td->Bandwidth) {
-		case 6:
-			fep->bandwidth_hz = 6000000;
-			break;
-		case 7:
-			fep->bandwidth_hz = 7000000;
-			break;
-		case 8:
-			fep->bandwidth_hz = 8000000;
-			break;
-		}
-
-		switch (td->TransmissionMode) {
-		case 2:
-			fep->transmission_mode = TRANSMISSION_MODE_2K;
-			break;
-		case 8:
-			fep->transmission_mode = TRANSMISSION_MODE_8K;
-		}
-
-		switch (td->GuardInterval) {
-		case 0:
-			fep->guard_interval = GUARD_INTERVAL_1_32;
-			break;
-		case 1:
-			fep->guard_interval = GUARD_INTERVAL_1_16;
-			break;
-		case 2:
-			fep->guard_interval = GUARD_INTERVAL_1_8;
-			break;
-		case 3:
-			fep->guard_interval = GUARD_INTERVAL_1_4;
-			break;
-		}
-
-		switch (td->CodeRate) {
-		case 0:
-			fep->code_rate_HP = FEC_1_2;
-			break;
-		case 1:
-			fep->code_rate_HP = FEC_2_3;
-			break;
-		case 2:
-			fep->code_rate_HP = FEC_3_4;
-			break;
-		case 3:
-			fep->code_rate_HP = FEC_5_6;
-			break;
-		case 4:
-			fep->code_rate_HP = FEC_7_8;
-			break;
-		}
-
-		switch (td->LPCodeRate) {
-		case 0:
-			fep->code_rate_LP = FEC_1_2;
-			break;
-		case 1:
-			fep->code_rate_LP = FEC_2_3;
-			break;
-		case 2:
-			fep->code_rate_LP = FEC_3_4;
-			break;
-		case 3:
-			fep->code_rate_LP = FEC_5_6;
-			break;
-		case 4:
-			fep->code_rate_LP = FEC_7_8;
-			break;
-		}
-
-		switch (td->Constellation) {
-		case 0:
-			fep->modulation = QPSK;
-			break;
-		case 1:
-			fep->modulation = QAM_16;
-			break;
-		case 2:
-			fep->modulation = QAM_64;
-			break;
-		}
-
-		switch (td->Hierarchy) {
-		case 0:
-			fep->hierarchy = HIERARCHY_NONE;
-			break;
-		case 1:
-			fep->hierarchy = HIERARCHY_1;
-			break;
-		case 2:
-			fep->hierarchy = HIERARCHY_2;
-			break;
-		case 3:
-			fep->hierarchy = HIERARCHY_4;
-			break;
-		}
-
-		fep->inversion = INVERSION_AUTO;
-		break;
-	case DEVICE_MODE_ISDBT:
-	case DEVICE_MODE_ISDBT_BDA:
-		fep->frequency = td->Frequency;
-		fep->bandwidth_hz = 6000000;
-		/* todo: retrive the other parameters */
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int smsdvb_init(struct dvb_frontend *fe)
-{
-	struct smsdvb_client_t *client =
-		container_of(fe, struct smsdvb_client_t, frontend);
-
-	sms_board_power(client->coredev, 1);
-
-	sms_board_dvb3_event(client, DVB3_EVENT_INIT);
-	return 0;
-}
-
-static int smsdvb_sleep(struct dvb_frontend *fe)
-{
-	struct smsdvb_client_t *client =
-		container_of(fe, struct smsdvb_client_t, frontend);
-
-	sms_board_led_feedback(client->coredev, SMS_LED_OFF);
-	sms_board_power(client->coredev, 0);
-
-	sms_board_dvb3_event(client, DVB3_EVENT_SLEEP);
-
-	return 0;
-}
-
-static void smsdvb_release(struct dvb_frontend *fe)
-{
-	/* do nothing */
-}
-
-static struct dvb_frontend_ops smsdvb_fe_ops = {
-	.info = {
-		.name			= "Siano Mobile Digital MDTV Receiver",
-		.frequency_min		= 44250000,
-		.frequency_max		= 867250000,
-		.frequency_stepsize	= 250000,
-		.caps = FE_CAN_INVERSION_AUTO |
-			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
-			FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO |
-			FE_CAN_GUARD_INTERVAL_AUTO |
-			FE_CAN_RECOVER |
-			FE_CAN_HIERARCHY_AUTO,
-	},
-
-	.release = smsdvb_release,
-
-	.set_frontend = smsdvb_set_frontend,
-	.get_frontend = smsdvb_get_frontend,
-	.get_tune_settings = smsdvb_get_tune_settings,
-
-	.read_status = smsdvb_read_status,
-	.read_ber = smsdvb_read_ber,
-	.read_signal_strength = smsdvb_read_signal_strength,
-	.read_snr = smsdvb_read_snr,
-	.read_ucblocks = smsdvb_read_ucblocks,
-
-	.init = smsdvb_init,
-	.sleep = smsdvb_sleep,
-};
-
-static int smsdvb_hotplug(struct smscore_device_t *coredev,
-			  struct device *device, int arrival)
-{
-	struct smsclient_params_t params;
-	struct smsdvb_client_t *client;
-	int rc;
-
-	/* device removal handled by onremove callback */
-	if (!arrival)
-		return 0;
-	client = kzalloc(sizeof(struct smsdvb_client_t), GFP_KERNEL);
-	if (!client) {
-		sms_err("kmalloc() failed");
-		return -ENOMEM;
-	}
-
-	/* register dvb adapter */
-	rc = dvb_register_adapter(&client->adapter,
-				  sms_get_board(
-					smscore_get_board_id(coredev))->name,
-				  THIS_MODULE, device, adapter_nr);
-	if (rc < 0) {
-		sms_err("dvb_register_adapter() failed %d", rc);
-		goto adapter_error;
-	}
-
-	/* init dvb demux */
-	client->demux.dmx.capabilities = DMX_TS_FILTERING;
-	client->demux.filternum = 32; /* todo: nova ??? */
-	client->demux.feednum = 32;
-	client->demux.start_feed = smsdvb_start_feed;
-	client->demux.stop_feed = smsdvb_stop_feed;
-
-	rc = dvb_dmx_init(&client->demux);
-	if (rc < 0) {
-		sms_err("dvb_dmx_init failed %d", rc);
-		goto dvbdmx_error;
-	}
-
-	/* init dmxdev */
-	client->dmxdev.filternum = 32;
-	client->dmxdev.demux = &client->demux.dmx;
-	client->dmxdev.capabilities = 0;
-
-	rc = dvb_dmxdev_init(&client->dmxdev, &client->adapter);
-	if (rc < 0) {
-		sms_err("dvb_dmxdev_init failed %d", rc);
-		goto dmxdev_error;
-	}
-
-	/* init and register frontend */
-	memcpy(&client->frontend.ops, &smsdvb_fe_ops,
-	       sizeof(struct dvb_frontend_ops));
-
-	switch (smscore_get_device_mode(coredev)) {
-	case DEVICE_MODE_DVBT:
-	case DEVICE_MODE_DVBT_BDA:
-		client->frontend.ops.delsys[0] = SYS_DVBT;
-		break;
-	case DEVICE_MODE_ISDBT:
-	case DEVICE_MODE_ISDBT_BDA:
-		client->frontend.ops.delsys[0] = SYS_ISDBT;
-		break;
-	}
-
-	rc = dvb_register_frontend(&client->adapter, &client->frontend);
-	if (rc < 0) {
-		sms_err("frontend registration failed %d", rc);
-		goto frontend_error;
-	}
-
-	params.initial_id = 1;
-	params.data_type = MSG_SMS_DVBT_BDA_DATA;
-	params.onresponse_handler = smsdvb_onresponse;
-	params.onremove_handler = smsdvb_onremove;
-	params.context = client;
-
-	rc = smscore_register_client(coredev, &params, &client->smsclient);
-	if (rc < 0) {
-		sms_err("smscore_register_client() failed %d", rc);
-		goto client_error;
-	}
-
-	client->coredev = coredev;
-
-	init_completion(&client->tune_done);
-
-	kmutex_lock(&g_smsdvb_clientslock);
-
-	list_add(&client->entry, &g_smsdvb_clients);
-
-	kmutex_unlock(&g_smsdvb_clientslock);
-
-	client->event_fe_state = -1;
-	client->event_unc_state = -1;
-	sms_board_dvb3_event(client, DVB3_EVENT_HOTPLUG);
-
-	sms_info("success");
-	sms_board_setup(coredev);
-
-	return 0;
-
-client_error:
-	dvb_unregister_frontend(&client->frontend);
-
-frontend_error:
-	dvb_dmxdev_release(&client->dmxdev);
-
-dmxdev_error:
-	dvb_dmx_release(&client->demux);
-
-dvbdmx_error:
-	dvb_unregister_adapter(&client->adapter);
-
-adapter_error:
-	kfree(client);
-	return rc;
-}
-
-static int __init smsdvb_module_init(void)
-{
-	int rc;
-
-	INIT_LIST_HEAD(&g_smsdvb_clients);
-	kmutex_init(&g_smsdvb_clientslock);
-
-	rc = smscore_register_hotplug(smsdvb_hotplug);
-
-	sms_debug("");
-
-	return rc;
-}
-
-static void __exit smsdvb_module_exit(void)
-{
-	smscore_unregister_hotplug(smsdvb_hotplug);
-
-	kmutex_lock(&g_smsdvb_clientslock);
-
-	while (!list_empty(&g_smsdvb_clients))
-	       smsdvb_unregister_client(
-			(struct smsdvb_client_t *) g_smsdvb_clients.next);
-
-	kmutex_unlock(&g_smsdvb_clientslock);
-}
-
-module_init(smsdvb_module_init);
-module_exit(smsdvb_module_exit);
-
-MODULE_DESCRIPTION("SMS DVB subsystem adaptation module");
-MODULE_AUTHOR("Siano Mobile Silicon, Inc. (uris@siano-ms.com)");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/siano/smsendian.c b/drivers/media/dvb/siano/smsendian.c
deleted file mode 100644
index e2657c2..0000000
--- a/drivers/media/dvb/siano/smsendian.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/****************************************************************
-
- Siano Mobile Silicon, Inc.
- MDTV receiver kernel modules.
- Copyright (C) 2006-2009, Uri Shkolnik
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
- ****************************************************************/
-
-#include <linux/export.h>
-#include <asm/byteorder.h>
-
-#include "smsendian.h"
-#include "smscoreapi.h"
-
-void smsendian_handle_tx_message(void *buffer)
-{
-#ifdef __BIG_ENDIAN
-	struct SmsMsgData_ST *msg = (struct SmsMsgData_ST *)buffer;
-	int i;
-	int msgWords;
-
-	switch (msg->xMsgHeader.msgType) {
-	case MSG_SMS_DATA_DOWNLOAD_REQ:
-	{
-		msg->msgData[0] = le32_to_cpu(msg->msgData[0]);
-		break;
-	}
-
-	default:
-		msgWords = (msg->xMsgHeader.msgLength -
-				sizeof(struct SmsMsgHdr_ST))/4;
-
-		for (i = 0; i < msgWords; i++)
-			msg->msgData[i] = le32_to_cpu(msg->msgData[i]);
-
-		break;
-	}
-#endif /* __BIG_ENDIAN */
-}
-EXPORT_SYMBOL_GPL(smsendian_handle_tx_message);
-
-void smsendian_handle_rx_message(void *buffer)
-{
-#ifdef __BIG_ENDIAN
-	struct SmsMsgData_ST *msg = (struct SmsMsgData_ST *)buffer;
-	int i;
-	int msgWords;
-
-	switch (msg->xMsgHeader.msgType) {
-	case MSG_SMS_GET_VERSION_EX_RES:
-	{
-		struct SmsVersionRes_ST *ver =
-			(struct SmsVersionRes_ST *) msg;
-		ver->ChipModel = le16_to_cpu(ver->ChipModel);
-		break;
-	}
-
-	case MSG_SMS_DVBT_BDA_DATA:
-	case MSG_SMS_DAB_CHANNEL:
-	case MSG_SMS_DATA_MSG:
-	{
-		break;
-	}
-
-	default:
-	{
-		msgWords = (msg->xMsgHeader.msgLength -
-				sizeof(struct SmsMsgHdr_ST))/4;
-
-		for (i = 0; i < msgWords; i++)
-			msg->msgData[i] = le32_to_cpu(msg->msgData[i]);
-
-		break;
-	}
-	}
-#endif /* __BIG_ENDIAN */
-}
-EXPORT_SYMBOL_GPL(smsendian_handle_rx_message);
-
-void smsendian_handle_message_header(void *msg)
-{
-#ifdef __BIG_ENDIAN
-	struct SmsMsgHdr_ST *phdr = (struct SmsMsgHdr_ST *)msg;
-
-	phdr->msgType = le16_to_cpu(phdr->msgType);
-	phdr->msgLength = le16_to_cpu(phdr->msgLength);
-	phdr->msgFlags = le16_to_cpu(phdr->msgFlags);
-#endif /* __BIG_ENDIAN */
-}
-EXPORT_SYMBOL_GPL(smsendian_handle_message_header);
diff --git a/drivers/media/dvb/siano/smsendian.h b/drivers/media/dvb/siano/smsendian.h
deleted file mode 100644
index 1624d6f..0000000
--- a/drivers/media/dvb/siano/smsendian.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/****************************************************************
-
-Siano Mobile Silicon, Inc.
-MDTV receiver kernel modules.
-Copyright (C) 2006-2009, Uri Shkolnik
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-****************************************************************/
-
-#ifndef __SMS_ENDIAN_H__
-#define __SMS_ENDIAN_H__
-
-#include <asm/byteorder.h>
-
-extern void smsendian_handle_tx_message(void *buffer);
-extern void smsendian_handle_rx_message(void *buffer);
-extern void smsendian_handle_message_header(void *msg);
-
-#endif /* __SMS_ENDIAN_H__ */
-
diff --git a/drivers/media/dvb/siano/smsir.c b/drivers/media/dvb/siano/smsir.c
deleted file mode 100644
index 37bc5c4..0000000
--- a/drivers/media/dvb/siano/smsir.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/****************************************************************
-
- Siano Mobile Silicon, Inc.
- MDTV receiver kernel modules.
- Copyright (C) 2006-2009, Uri Shkolnik
-
- Copyright (c) 2010 - Mauro Carvalho Chehab
-	- Ported the driver to use rc-core
-	- IR raw event decoding is now done at rc-core
-	- Code almost re-written
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
- ****************************************************************/
-
-
-#include <linux/types.h>
-#include <linux/input.h>
-
-#include "smscoreapi.h"
-#include "smsir.h"
-#include "sms-cards.h"
-
-#define MODULE_NAME "smsmdtv"
-
-void sms_ir_event(struct smscore_device_t *coredev, const char *buf, int len)
-{
-	int i;
-	const s32 *samples = (const void *)buf;
-
-	for (i = 0; i < len >> 2; i++) {
-		DEFINE_IR_RAW_EVENT(ev);
-
-		ev.duration = abs(samples[i]) * 1000; /* Convert to ns */
-		ev.pulse = (samples[i] > 0) ? false : true;
-
-		ir_raw_event_store(coredev->ir.dev, &ev);
-	}
-	ir_raw_event_handle(coredev->ir.dev);
-}
-
-int sms_ir_init(struct smscore_device_t *coredev)
-{
-	int err;
-	int board_id = smscore_get_board_id(coredev);
-	struct rc_dev *dev;
-
-	sms_log("Allocating rc device");
-	dev = rc_allocate_device();
-	if (!dev) {
-		sms_err("Not enough memory");
-		return -ENOMEM;
-	}
-
-	coredev->ir.controller = 0;	/* Todo: vega/nova SPI number */
-	coredev->ir.timeout = IR_DEFAULT_TIMEOUT;
-	sms_log("IR port %d, timeout %d ms",
-			coredev->ir.controller, coredev->ir.timeout);
-
-	snprintf(coredev->ir.name, sizeof(coredev->ir.name),
-		 "SMS IR (%s)", sms_get_board(board_id)->name);
-
-	strlcpy(coredev->ir.phys, coredev->devpath, sizeof(coredev->ir.phys));
-	strlcat(coredev->ir.phys, "/ir0", sizeof(coredev->ir.phys));
-
-	dev->input_name = coredev->ir.name;
-	dev->input_phys = coredev->ir.phys;
-	dev->dev.parent = coredev->device;
-
-#if 0
-	/* TODO: properly initialize the parameters bellow */
-	dev->input_id.bustype = BUS_USB;
-	dev->input_id.version = 1;
-	dev->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
-	dev->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
-#endif
-
-	dev->priv = coredev;
-	dev->driver_type = RC_DRIVER_IR_RAW;
-	dev->allowed_protos = RC_TYPE_ALL;
-	dev->map_name = sms_get_board(board_id)->rc_codes;
-	dev->driver_name = MODULE_NAME;
-
-	sms_log("Input device (IR) %s is set for key events", dev->input_name);
-
-	err = rc_register_device(dev);
-	if (err < 0) {
-		sms_err("Failed to register device");
-		rc_free_device(dev);
-		return err;
-	}
-
-	coredev->ir.dev = dev;
-	return 0;
-}
-
-void sms_ir_exit(struct smscore_device_t *coredev)
-{
-	if (coredev->ir.dev)
-		rc_unregister_device(coredev->ir.dev);
-
-	sms_log("");
-}
diff --git a/drivers/media/dvb/siano/smsir.h b/drivers/media/dvb/siano/smsir.h
deleted file mode 100644
index ae92b3a..0000000
--- a/drivers/media/dvb/siano/smsir.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/****************************************************************
-
-Siano Mobile Silicon, Inc.
-MDTV receiver kernel modules.
-Copyright (C) 2006-2009, Uri Shkolnik
-
- Copyright (c) 2010 - Mauro Carvalho Chehab
-	- Ported the driver to use rc-core
-	- IR raw event decoding is now done at rc-core
-	- Code almost re-written
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-****************************************************************/
-
-#ifndef __SMS_IR_H__
-#define __SMS_IR_H__
-
-#include <linux/input.h>
-#include <media/rc-core.h>
-
-#define IR_DEFAULT_TIMEOUT		100
-
-struct smscore_device_t;
-
-struct ir_t {
-	struct rc_dev *dev;
-	char name[40];
-	char phys[32];
-
-	char *rc_codes;
-	u64 protocol;
-
-	u32 timeout;
-	u32 controller;
-};
-
-int sms_ir_init(struct smscore_device_t *coredev);
-void sms_ir_exit(struct smscore_device_t *coredev);
-void sms_ir_event(struct smscore_device_t *coredev,
-			const char *buf, int len);
-
-#endif /* __SMS_IR_H__ */
-
diff --git a/drivers/media/dvb/siano/smssdio.c b/drivers/media/dvb/siano/smssdio.c
deleted file mode 100644
index d6f3f10..0000000
--- a/drivers/media/dvb/siano/smssdio.c
+++ /dev/null
@@ -1,365 +0,0 @@
-/*
- *  smssdio.c - Siano 1xxx SDIO interface driver
- *
- *  Copyright 2008 Pierre Ossman
- *
- * Based on code by Siano Mobile Silicon, Inc.,
- * Copyright (C) 2006-2008, Uri Shkolnik
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- *
- * This hardware is a bit odd in that all transfers should be done
- * to/from the SMSSDIO_DATA register, yet the "increase address" bit
- * always needs to be set.
- *
- * Also, buffers from the card are always aligned to 128 byte
- * boundaries.
- */
-
-/*
- * General cleanup notes:
- *
- * - only typedefs should be name *_t
- *
- * - use ERR_PTR and friends for smscore_register_device()
- *
- * - smscore_getbuffer should zero fields
- *
- * Fix stop command
- */
-
-#include <linux/moduleparam.h>
-#include <linux/slab.h>
-#include <linux/firmware.h>
-#include <linux/delay.h>
-#include <linux/mmc/card.h>
-#include <linux/mmc/sdio_func.h>
-#include <linux/mmc/sdio_ids.h>
-#include <linux/module.h>
-
-#include "smscoreapi.h"
-#include "sms-cards.h"
-
-/* Registers */
-
-#define SMSSDIO_DATA		0x00
-#define SMSSDIO_INT		0x04
-#define SMSSDIO_BLOCK_SIZE	128
-
-static const struct sdio_device_id smssdio_ids[] __devinitconst = {
-	{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_STELLAR),
-	 .driver_data = SMS1XXX_BOARD_SIANO_STELLAR},
-	{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_NOVA_A0),
-	 .driver_data = SMS1XXX_BOARD_SIANO_NOVA_A},
-	{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_NOVA_B0),
-	 .driver_data = SMS1XXX_BOARD_SIANO_NOVA_B},
-	{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_VEGA_A0),
-	 .driver_data = SMS1XXX_BOARD_SIANO_VEGA},
-	{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_VENICE),
-	 .driver_data = SMS1XXX_BOARD_SIANO_VEGA},
-	{ /* end: all zeroes */ },
-};
-
-MODULE_DEVICE_TABLE(sdio, smssdio_ids);
-
-struct smssdio_device {
-	struct sdio_func *func;
-
-	struct smscore_device_t *coredev;
-
-	struct smscore_buffer_t *split_cb;
-};
-
-/*******************************************************************/
-/* Siano core callbacks                                            */
-/*******************************************************************/
-
-static int smssdio_sendrequest(void *context, void *buffer, size_t size)
-{
-	int ret = 0;
-	struct smssdio_device *smsdev;
-
-	smsdev = context;
-
-	sdio_claim_host(smsdev->func);
-
-	while (size >= smsdev->func->cur_blksize) {
-		ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA,
-					buffer, smsdev->func->cur_blksize);
-		if (ret)
-			goto out;
-
-		buffer += smsdev->func->cur_blksize;
-		size -= smsdev->func->cur_blksize;
-	}
-
-	if (size) {
-		ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA,
-					buffer, size);
-	}
-
-out:
-	sdio_release_host(smsdev->func);
-
-	return ret;
-}
-
-/*******************************************************************/
-/* SDIO callbacks                                                  */
-/*******************************************************************/
-
-static void smssdio_interrupt(struct sdio_func *func)
-{
-	int ret;
-
-	struct smssdio_device *smsdev;
-	struct smscore_buffer_t *cb;
-	struct SmsMsgHdr_ST *hdr;
-	size_t size;
-
-	smsdev = sdio_get_drvdata(func);
-
-	/*
-	 * The interrupt register has no defined meaning. It is just
-	 * a way of turning of the level triggered interrupt.
-	 */
-	(void)sdio_readb(func, SMSSDIO_INT, &ret);
-	if (ret) {
-		sms_err("Unable to read interrupt register!\n");
-		return;
-	}
-
-	if (smsdev->split_cb == NULL) {
-		cb = smscore_getbuffer(smsdev->coredev);
-		if (!cb) {
-			sms_err("Unable to allocate data buffer!\n");
-			return;
-		}
-
-		ret = sdio_memcpy_fromio(smsdev->func,
-					 cb->p,
-					 SMSSDIO_DATA,
-					 SMSSDIO_BLOCK_SIZE);
-		if (ret) {
-			sms_err("Error %d reading initial block!\n", ret);
-			return;
-		}
-
-		hdr = cb->p;
-
-		if (hdr->msgFlags & MSG_HDR_FLAG_SPLIT_MSG) {
-			smsdev->split_cb = cb;
-			return;
-		}
-
-		if (hdr->msgLength > smsdev->func->cur_blksize)
-			size = hdr->msgLength - smsdev->func->cur_blksize;
-		else
-			size = 0;
-	} else {
-		cb = smsdev->split_cb;
-		hdr = cb->p;
-
-		size = hdr->msgLength - sizeof(struct SmsMsgHdr_ST);
-
-		smsdev->split_cb = NULL;
-	}
-
-	if (size) {
-		void *buffer;
-
-		buffer = cb->p + (hdr->msgLength - size);
-		size = ALIGN(size, SMSSDIO_BLOCK_SIZE);
-
-		BUG_ON(smsdev->func->cur_blksize != SMSSDIO_BLOCK_SIZE);
-
-		/*
-		 * First attempt to transfer all of it in one go...
-		 */
-		ret = sdio_memcpy_fromio(smsdev->func,
-					 buffer,
-					 SMSSDIO_DATA,
-					 size);
-		if (ret && ret != -EINVAL) {
-			smscore_putbuffer(smsdev->coredev, cb);
-			sms_err("Error %d reading data from card!\n", ret);
-			return;
-		}
-
-		/*
-		 * ..then fall back to one block at a time if that is
-		 * not possible...
-		 *
-		 * (we have to do this manually because of the
-		 * problem with the "increase address" bit)
-		 */
-		if (ret == -EINVAL) {
-			while (size) {
-				ret = sdio_memcpy_fromio(smsdev->func,
-						  buffer, SMSSDIO_DATA,
-						  smsdev->func->cur_blksize);
-				if (ret) {
-					smscore_putbuffer(smsdev->coredev, cb);
-					sms_err("Error %d reading "
-						"data from card!\n", ret);
-					return;
-				}
-
-				buffer += smsdev->func->cur_blksize;
-				if (size > smsdev->func->cur_blksize)
-					size -= smsdev->func->cur_blksize;
-				else
-					size = 0;
-			}
-		}
-	}
-
-	cb->size = hdr->msgLength;
-	cb->offset = 0;
-
-	smscore_onresponse(smsdev->coredev, cb);
-}
-
-static int __devinit smssdio_probe(struct sdio_func *func,
-			 const struct sdio_device_id *id)
-{
-	int ret;
-
-	int board_id;
-	struct smssdio_device *smsdev;
-	struct smsdevice_params_t params;
-
-	board_id = id->driver_data;
-
-	smsdev = kzalloc(sizeof(struct smssdio_device), GFP_KERNEL);
-	if (!smsdev)
-		return -ENOMEM;
-
-	smsdev->func = func;
-
-	memset(&params, 0, sizeof(struct smsdevice_params_t));
-
-	params.device = &func->dev;
-	params.buffer_size = 0x5000;	/* ?? */
-	params.num_buffers = 22;	/* ?? */
-	params.context = smsdev;
-
-	snprintf(params.devpath, sizeof(params.devpath),
-		 "sdio\\%s", sdio_func_id(func));
-
-	params.sendrequest_handler = smssdio_sendrequest;
-
-	params.device_type = sms_get_board(board_id)->type;
-
-	if (params.device_type != SMS_STELLAR)
-		params.flags |= SMS_DEVICE_FAMILY2;
-	else {
-		/*
-		 * FIXME: Stellar needs special handling...
-		 */
-		ret = -ENODEV;
-		goto free;
-	}
-
-	ret = smscore_register_device(&params, &smsdev->coredev);
-	if (ret < 0)
-		goto free;
-
-	smscore_set_board_id(smsdev->coredev, board_id);
-
-	sdio_claim_host(func);
-
-	ret = sdio_enable_func(func);
-	if (ret)
-		goto release;
-
-	ret = sdio_set_block_size(func, SMSSDIO_BLOCK_SIZE);
-	if (ret)
-		goto disable;
-
-	ret = sdio_claim_irq(func, smssdio_interrupt);
-	if (ret)
-		goto disable;
-
-	sdio_set_drvdata(func, smsdev);
-
-	sdio_release_host(func);
-
-	ret = smscore_start_device(smsdev->coredev);
-	if (ret < 0)
-		goto reclaim;
-
-	return 0;
-
-reclaim:
-	sdio_claim_host(func);
-	sdio_release_irq(func);
-disable:
-	sdio_disable_func(func);
-release:
-	sdio_release_host(func);
-	smscore_unregister_device(smsdev->coredev);
-free:
-	kfree(smsdev);
-
-	return ret;
-}
-
-static void smssdio_remove(struct sdio_func *func)
-{
-	struct smssdio_device *smsdev;
-
-	smsdev = sdio_get_drvdata(func);
-
-	/* FIXME: racy! */
-	if (smsdev->split_cb)
-		smscore_putbuffer(smsdev->coredev, smsdev->split_cb);
-
-	smscore_unregister_device(smsdev->coredev);
-
-	sdio_claim_host(func);
-	sdio_release_irq(func);
-	sdio_disable_func(func);
-	sdio_release_host(func);
-
-	kfree(smsdev);
-}
-
-static struct sdio_driver smssdio_driver = {
-	.name = "smssdio",
-	.id_table = smssdio_ids,
-	.probe = smssdio_probe,
-	.remove = smssdio_remove,
-};
-
-/*******************************************************************/
-/* Module functions                                                */
-/*******************************************************************/
-
-static int __init smssdio_module_init(void)
-{
-	int ret = 0;
-
-	printk(KERN_INFO "smssdio: Siano SMS1xxx SDIO driver\n");
-	printk(KERN_INFO "smssdio: Copyright Pierre Ossman\n");
-
-	ret = sdio_register_driver(&smssdio_driver);
-
-	return ret;
-}
-
-static void __exit smssdio_module_exit(void)
-{
-	sdio_unregister_driver(&smssdio_driver);
-}
-
-module_init(smssdio_module_init);
-module_exit(smssdio_module_exit);
-
-MODULE_DESCRIPTION("Siano SMS1xxx SDIO driver");
-MODULE_AUTHOR("Pierre Ossman");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c
deleted file mode 100644
index aac6222..0000000
--- a/drivers/media/dvb/siano/smsusb.c
+++ /dev/null
@@ -1,568 +0,0 @@
-/****************************************************************
-
-Siano Mobile Silicon, Inc.
-MDTV receiver kernel modules.
-Copyright (C) 2005-2009, Uri Shkolnik, Anatoly Greenblat
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-****************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/usb.h>
-#include <linux/firmware.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-
-#include "smscoreapi.h"
-#include "sms-cards.h"
-#include "smsendian.h"
-
-static int sms_dbg;
-module_param_named(debug, sms_dbg, int, 0644);
-MODULE_PARM_DESC(debug, "set debug level (info=1, adv=2 (or-able))");
-
-#define USB1_BUFFER_SIZE		0x1000
-#define USB2_BUFFER_SIZE		0x4000
-
-#define MAX_BUFFERS		50
-#define MAX_URBS		10
-
-struct smsusb_device_t;
-
-struct smsusb_urb_t {
-	struct smscore_buffer_t *cb;
-	struct smsusb_device_t	*dev;
-
-	struct urb urb;
-};
-
-struct smsusb_device_t {
-	struct usb_device *udev;
-	struct smscore_device_t *coredev;
-
-	struct smsusb_urb_t 	surbs[MAX_URBS];
-
-	int		response_alignment;
-	int		buffer_size;
-};
-
-static int smsusb_submit_urb(struct smsusb_device_t *dev,
-			     struct smsusb_urb_t *surb);
-
-static void smsusb_onresponse(struct urb *urb)
-{
-	struct smsusb_urb_t *surb = (struct smsusb_urb_t *) urb->context;
-	struct smsusb_device_t *dev = surb->dev;
-
-	if (urb->status == -ESHUTDOWN) {
-		sms_err("error, urb status %d (-ESHUTDOWN), %d bytes",
-			urb->status, urb->actual_length);
-		return;
-	}
-
-	if ((urb->actual_length > 0) && (urb->status == 0)) {
-		struct SmsMsgHdr_ST *phdr = (struct SmsMsgHdr_ST *)surb->cb->p;
-
-		smsendian_handle_message_header(phdr);
-		if (urb->actual_length >= phdr->msgLength) {
-			surb->cb->size = phdr->msgLength;
-
-			if (dev->response_alignment &&
-			    (phdr->msgFlags & MSG_HDR_FLAG_SPLIT_MSG)) {
-
-				surb->cb->offset =
-					dev->response_alignment +
-					((phdr->msgFlags >> 8) & 3);
-
-				/* sanity check */
-				if (((int) phdr->msgLength +
-				     surb->cb->offset) > urb->actual_length) {
-					sms_err("invalid response "
-						"msglen %d offset %d "
-						"size %d",
-						phdr->msgLength,
-						surb->cb->offset,
-						urb->actual_length);
-					goto exit_and_resubmit;
-				}
-
-				/* move buffer pointer and
-				 * copy header to its new location */
-				memcpy((char *) phdr + surb->cb->offset,
-				       phdr, sizeof(struct SmsMsgHdr_ST));
-			} else
-				surb->cb->offset = 0;
-
-			smscore_onresponse(dev->coredev, surb->cb);
-			surb->cb = NULL;
-		} else {
-			sms_err("invalid response "
-				"msglen %d actual %d",
-				phdr->msgLength, urb->actual_length);
-		}
-	} else
-		sms_err("error, urb status %d, %d bytes",
-			urb->status, urb->actual_length);
-
-
-exit_and_resubmit:
-	smsusb_submit_urb(dev, surb);
-}
-
-static int smsusb_submit_urb(struct smsusb_device_t *dev,
-			     struct smsusb_urb_t *surb)
-{
-	if (!surb->cb) {
-		surb->cb = smscore_getbuffer(dev->coredev);
-		if (!surb->cb) {
-			sms_err("smscore_getbuffer(...) returned NULL");
-			return -ENOMEM;
-		}
-	}
-
-	usb_fill_bulk_urb(
-		&surb->urb,
-		dev->udev,
-		usb_rcvbulkpipe(dev->udev, 0x81),
-		surb->cb->p,
-		dev->buffer_size,
-		smsusb_onresponse,
-		surb
-	);
-	surb->urb.transfer_dma = surb->cb->phys;
-	surb->urb.transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	return usb_submit_urb(&surb->urb, GFP_ATOMIC);
-}
-
-static void smsusb_stop_streaming(struct smsusb_device_t *dev)
-{
-	int i;
-
-	for (i = 0; i < MAX_URBS; i++) {
-		usb_kill_urb(&dev->surbs[i].urb);
-
-		if (dev->surbs[i].cb) {
-			smscore_putbuffer(dev->coredev, dev->surbs[i].cb);
-			dev->surbs[i].cb = NULL;
-		}
-	}
-}
-
-static int smsusb_start_streaming(struct smsusb_device_t *dev)
-{
-	int i, rc;
-
-	for (i = 0; i < MAX_URBS; i++) {
-		rc = smsusb_submit_urb(dev, &dev->surbs[i]);
-		if (rc < 0) {
-			sms_err("smsusb_submit_urb(...) failed");
-			smsusb_stop_streaming(dev);
-			break;
-		}
-	}
-
-	return rc;
-}
-
-static int smsusb_sendrequest(void *context, void *buffer, size_t size)
-{
-	struct smsusb_device_t *dev = (struct smsusb_device_t *) context;
-	int dummy;
-
-	smsendian_handle_message_header((struct SmsMsgHdr_ST *)buffer);
-	return usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 2),
-			    buffer, size, &dummy, 1000);
-}
-
-static char *smsusb1_fw_lkup[] = {
-	"dvbt_stellar_usb.inp",
-	"dvbh_stellar_usb.inp",
-	"tdmb_stellar_usb.inp",
-	"none",
-	"dvbt_bda_stellar_usb.inp",
-};
-
-static inline char *sms_get_fw_name(int mode, int board_id)
-{
-	char **fw = sms_get_board(board_id)->fw;
-	return (fw && fw[mode]) ? fw[mode] : smsusb1_fw_lkup[mode];
-}
-
-static int smsusb1_load_firmware(struct usb_device *udev, int id, int board_id)
-{
-	const struct firmware *fw;
-	u8 *fw_buffer;
-	int rc, dummy;
-	char *fw_filename;
-
-	if (id < DEVICE_MODE_DVBT || id > DEVICE_MODE_DVBT_BDA) {
-		sms_err("invalid firmware id specified %d", id);
-		return -EINVAL;
-	}
-
-	fw_filename = sms_get_fw_name(id, board_id);
-
-	rc = request_firmware(&fw, fw_filename, &udev->dev);
-	if (rc < 0) {
-		sms_warn("failed to open \"%s\" mode %d, "
-			 "trying again with default firmware", fw_filename, id);
-
-		fw_filename = smsusb1_fw_lkup[id];
-		rc = request_firmware(&fw, fw_filename, &udev->dev);
-		if (rc < 0) {
-			sms_warn("failed to open \"%s\" mode %d",
-				 fw_filename, id);
-
-			return rc;
-		}
-	}
-
-	fw_buffer = kmalloc(fw->size, GFP_KERNEL);
-	if (fw_buffer) {
-		memcpy(fw_buffer, fw->data, fw->size);
-
-		rc = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 2),
-				  fw_buffer, fw->size, &dummy, 1000);
-
-		sms_info("sent %zd(%d) bytes, rc %d", fw->size, dummy, rc);
-
-		kfree(fw_buffer);
-	} else {
-		sms_err("failed to allocate firmware buffer");
-		rc = -ENOMEM;
-	}
-	sms_info("read FW %s, size=%zd", fw_filename, fw->size);
-
-	release_firmware(fw);
-
-	return rc;
-}
-
-static void smsusb1_detectmode(void *context, int *mode)
-{
-	char *product_string =
-		((struct smsusb_device_t *) context)->udev->product;
-
-	*mode = DEVICE_MODE_NONE;
-
-	if (!product_string) {
-		product_string = "none";
-		sms_err("product string not found");
-	} else if (strstr(product_string, "DVBH"))
-		*mode = 1;
-	else if (strstr(product_string, "BDA"))
-		*mode = 4;
-	else if (strstr(product_string, "DVBT"))
-		*mode = 0;
-	else if (strstr(product_string, "TDMB"))
-		*mode = 2;
-
-	sms_info("%d \"%s\"", *mode, product_string);
-}
-
-static int smsusb1_setmode(void *context, int mode)
-{
-	struct SmsMsgHdr_ST Msg = { MSG_SW_RELOAD_REQ, 0, HIF_TASK,
-			     sizeof(struct SmsMsgHdr_ST), 0 };
-
-	if (mode < DEVICE_MODE_DVBT || mode > DEVICE_MODE_DVBT_BDA) {
-		sms_err("invalid firmware id specified %d", mode);
-		return -EINVAL;
-	}
-
-	return smsusb_sendrequest(context, &Msg, sizeof(Msg));
-}
-
-static void smsusb_term_device(struct usb_interface *intf)
-{
-	struct smsusb_device_t *dev = usb_get_intfdata(intf);
-
-	if (dev) {
-		smsusb_stop_streaming(dev);
-
-		/* unregister from smscore */
-		if (dev->coredev)
-			smscore_unregister_device(dev->coredev);
-
-		sms_info("device %p destroyed", dev);
-		kfree(dev);
-	}
-
-	usb_set_intfdata(intf, NULL);
-}
-
-static int smsusb_init_device(struct usb_interface *intf, int board_id)
-{
-	struct smsdevice_params_t params;
-	struct smsusb_device_t *dev;
-	int i, rc;
-
-	/* create device object */
-	dev = kzalloc(sizeof(struct smsusb_device_t), GFP_KERNEL);
-	if (!dev) {
-		sms_err("kzalloc(sizeof(struct smsusb_device_t) failed");
-		return -ENOMEM;
-	}
-
-	memset(&params, 0, sizeof(params));
-	usb_set_intfdata(intf, dev);
-	dev->udev = interface_to_usbdev(intf);
-
-	params.device_type = sms_get_board(board_id)->type;
-
-	switch (params.device_type) {
-	case SMS_STELLAR:
-		dev->buffer_size = USB1_BUFFER_SIZE;
-
-		params.setmode_handler = smsusb1_setmode;
-		params.detectmode_handler = smsusb1_detectmode;
-		break;
-	default:
-		sms_err("Unspecified sms device type!");
-		/* fall-thru */
-	case SMS_NOVA_A0:
-	case SMS_NOVA_B0:
-	case SMS_VEGA:
-		dev->buffer_size = USB2_BUFFER_SIZE;
-		dev->response_alignment =
-		    le16_to_cpu(dev->udev->ep_in[1]->desc.wMaxPacketSize) -
-		    sizeof(struct SmsMsgHdr_ST);
-
-		params.flags |= SMS_DEVICE_FAMILY2;
-		break;
-	}
-
-	params.device = &dev->udev->dev;
-	params.buffer_size = dev->buffer_size;
-	params.num_buffers = MAX_BUFFERS;
-	params.sendrequest_handler = smsusb_sendrequest;
-	params.context = dev;
-	usb_make_path(dev->udev, params.devpath, sizeof(params.devpath));
-
-	/* register in smscore */
-	rc = smscore_register_device(&params, &dev->coredev);
-	if (rc < 0) {
-		sms_err("smscore_register_device(...) failed, rc %d", rc);
-		smsusb_term_device(intf);
-		return rc;
-	}
-
-	smscore_set_board_id(dev->coredev, board_id);
-
-	/* initialize urbs */
-	for (i = 0; i < MAX_URBS; i++) {
-		dev->surbs[i].dev = dev;
-		usb_init_urb(&dev->surbs[i].urb);
-	}
-
-	sms_info("smsusb_start_streaming(...).");
-	rc = smsusb_start_streaming(dev);
-	if (rc < 0) {
-		sms_err("smsusb_start_streaming(...) failed");
-		smsusb_term_device(intf);
-		return rc;
-	}
-
-	rc = smscore_start_device(dev->coredev);
-	if (rc < 0) {
-		sms_err("smscore_start_device(...) failed");
-		smsusb_term_device(intf);
-		return rc;
-	}
-
-	sms_info("device %p created", dev);
-
-	return rc;
-}
-
-static int __devinit smsusb_probe(struct usb_interface *intf,
-			const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev(intf);
-	char devpath[32];
-	int i, rc;
-
-	rc = usb_clear_halt(udev, usb_rcvbulkpipe(udev, 0x81));
-	rc = usb_clear_halt(udev, usb_rcvbulkpipe(udev, 0x02));
-
-	if (intf->num_altsetting > 0) {
-		rc = usb_set_interface(
-			udev, intf->cur_altsetting->desc.bInterfaceNumber, 0);
-		if (rc < 0) {
-			sms_err("usb_set_interface failed, rc %d", rc);
-			return rc;
-		}
-	}
-
-	sms_info("smsusb_probe %d",
-	       intf->cur_altsetting->desc.bInterfaceNumber);
-	for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++)
-		sms_info("endpoint %d %02x %02x %d", i,
-		       intf->cur_altsetting->endpoint[i].desc.bEndpointAddress,
-		       intf->cur_altsetting->endpoint[i].desc.bmAttributes,
-		       intf->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
-
-	if ((udev->actconfig->desc.bNumInterfaces == 2) &&
-	    (intf->cur_altsetting->desc.bInterfaceNumber == 0)) {
-		sms_err("rom interface 0 is not used");
-		return -ENODEV;
-	}
-
-	if (intf->cur_altsetting->desc.bInterfaceNumber == 1) {
-		snprintf(devpath, sizeof(devpath), "usb\\%d-%s",
-			 udev->bus->busnum, udev->devpath);
-		sms_info("stellar device was found.");
-		return smsusb1_load_firmware(
-				udev, smscore_registry_getmode(devpath),
-				id->driver_info);
-	}
-
-	rc = smsusb_init_device(intf, id->driver_info);
-	sms_info("rc %d", rc);
-	sms_board_load_modules(id->driver_info);
-	return rc;
-}
-
-static void smsusb_disconnect(struct usb_interface *intf)
-{
-	smsusb_term_device(intf);
-}
-
-static int smsusb_suspend(struct usb_interface *intf, pm_message_t msg)
-{
-	struct smsusb_device_t *dev = usb_get_intfdata(intf);
-	printk(KERN_INFO "%s: Entering status %d.\n", __func__, msg.event);
-	smsusb_stop_streaming(dev);
-	return 0;
-}
-
-static int smsusb_resume(struct usb_interface *intf)
-{
-	int rc, i;
-	struct smsusb_device_t *dev = usb_get_intfdata(intf);
-	struct usb_device *udev = interface_to_usbdev(intf);
-
-	printk(KERN_INFO "%s: Entering.\n", __func__);
-	usb_clear_halt(udev, usb_rcvbulkpipe(udev, 0x81));
-	usb_clear_halt(udev, usb_rcvbulkpipe(udev, 0x02));
-
-	for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++)
-		printk(KERN_INFO "endpoint %d %02x %02x %d\n", i,
-		       intf->cur_altsetting->endpoint[i].desc.bEndpointAddress,
-		       intf->cur_altsetting->endpoint[i].desc.bmAttributes,
-		       intf->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
-
-	if (intf->num_altsetting > 0) {
-		rc = usb_set_interface(udev,
-				       intf->cur_altsetting->desc.
-				       bInterfaceNumber, 0);
-		if (rc < 0) {
-			printk(KERN_INFO "%s usb_set_interface failed, "
-			       "rc %d\n", __func__, rc);
-			return rc;
-		}
-	}
-
-	smsusb_start_streaming(dev);
-	return 0;
-}
-
-static const struct usb_device_id smsusb_id_table[] = {
-	{ USB_DEVICE(0x187f, 0x0010),
-		.driver_info = SMS1XXX_BOARD_SIANO_STELLAR },
-	{ USB_DEVICE(0x187f, 0x0100),
-		.driver_info = SMS1XXX_BOARD_SIANO_STELLAR },
-	{ USB_DEVICE(0x187f, 0x0200),
-		.driver_info = SMS1XXX_BOARD_SIANO_NOVA_A },
-	{ USB_DEVICE(0x187f, 0x0201),
-		.driver_info = SMS1XXX_BOARD_SIANO_NOVA_B },
-	{ USB_DEVICE(0x187f, 0x0300),
-		.driver_info = SMS1XXX_BOARD_SIANO_VEGA },
-	{ USB_DEVICE(0x2040, 0x1700),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT },
-	{ USB_DEVICE(0x2040, 0x1800),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A },
-	{ USB_DEVICE(0x2040, 0x1801),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B },
-	{ USB_DEVICE(0x2040, 0x2000),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD },
-	{ USB_DEVICE(0x2040, 0x2009),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2 },
-	{ USB_DEVICE(0x2040, 0x200a),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD },
-	{ USB_DEVICE(0x2040, 0x2010),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD },
-	{ USB_DEVICE(0x2040, 0x2011),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD },
-	{ USB_DEVICE(0x2040, 0x2019),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD },
-	{ USB_DEVICE(0x2040, 0x5500),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
-	{ USB_DEVICE(0x2040, 0x5510),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
-	{ USB_DEVICE(0x2040, 0x5520),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
-	{ USB_DEVICE(0x2040, 0x5530),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
-	{ USB_DEVICE(0x2040, 0x5580),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
-	{ USB_DEVICE(0x2040, 0x5590),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
-	{ USB_DEVICE(0x187f, 0x0202),
-		.driver_info = SMS1XXX_BOARD_SIANO_NICE },
-	{ USB_DEVICE(0x187f, 0x0301),
-		.driver_info = SMS1XXX_BOARD_SIANO_VENICE },
-	{ USB_DEVICE(0x2040, 0xb900),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
-	{ USB_DEVICE(0x2040, 0xb910),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
-	{ USB_DEVICE(0x2040, 0xb980),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
-	{ USB_DEVICE(0x2040, 0xb990),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
-	{ USB_DEVICE(0x2040, 0xc000),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
-	{ USB_DEVICE(0x2040, 0xc010),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
-	{ USB_DEVICE(0x2040, 0xc080),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
-	{ USB_DEVICE(0x2040, 0xc090),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
-	{ USB_DEVICE(0x2040, 0xc0a0),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
-	{ USB_DEVICE(0x2040, 0xf5a0),
-		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
-	{ } /* Terminating entry */
-	};
-
-MODULE_DEVICE_TABLE(usb, smsusb_id_table);
-
-static struct usb_driver smsusb_driver = {
-	.name			= "smsusb",
-	.probe			= smsusb_probe,
-	.disconnect		= smsusb_disconnect,
-	.id_table		= smsusb_id_table,
-
-	.suspend		= smsusb_suspend,
-	.resume			= smsusb_resume,
-};
-
-module_usb_driver(smsusb_driver);
-
-MODULE_DESCRIPTION("Driver for the Siano SMS1xxx USB dongle");
-MODULE_AUTHOR("Siano Mobile Silicon, INC. (uris@siano-ms.com)");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
deleted file mode 100644
index 9d83ced..0000000
--- a/drivers/media/dvb/ttpci/Kconfig
+++ /dev/null
@@ -1,159 +0,0 @@
-config TTPCI_EEPROM
-	tristate
-	depends on I2C
-	default n
-
-config DVB_AV7110
-	tristate "AV7110 cards"
-	depends on DVB_CORE && PCI && I2C
-	select TTPCI_EEPROM
-	select VIDEO_SAA7146_VV
-	depends on VIDEO_DEV	# dependencies of VIDEO_SAA7146_VV
-	select DVB_VES1820 if !DVB_FE_CUSTOMISE
-	select DVB_VES1X93 if !DVB_FE_CUSTOMISE
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_TDA8083 if !DVB_FE_CUSTOMISE
-	select DVB_SP8870 if !DVB_FE_CUSTOMISE
-	select DVB_STV0297 if !DVB_FE_CUSTOMISE
-	select DVB_L64781 if !DVB_FE_CUSTOMISE
-	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
-	help
-	  Support for SAA7146 and AV7110 based DVB cards as produced
-	  by Fujitsu-Siemens, Technotrend, Hauppauge and others.
-
-	  This driver only supports the fullfeatured cards with
-	  onboard MPEG2 decoder.
-
-	  This driver needs an external firmware. Please use the script
-	  "<kerneldir>/Documentation/dvb/get_dvb_firmware av7110" to
-	  download/extract it, and then copy it to /usr/lib/hotplug/firmware
-	  or /lib/firmware (depending on configuration of firmware hotplug).
-
-	  Alternatively, you can download the file and use the kernel's
-	  EXTRA_FIRMWARE configuration option to build it into your
-	  kernel image by adding the filename to the EXTRA_FIRMWARE
-	  configuration option string.
-
-	  Say Y if you own such a card and want to use it.
-
-config DVB_AV7110_OSD
-	bool "AV7110 OSD support"
-	depends on DVB_AV7110
-	default y if DVB_AV7110=y || DVB_AV7110=m
-	help
-	  The AV7110 firmware provides some code to generate an OnScreenDisplay
-	  on the video output. This is kind of nonstandard and not guaranteed to
-	  be maintained.
-
-	  Anyway, some popular DVB software like VDR uses this OSD to render
-	  its menus, so say Y if you want to use this software.
-
-	  All other people say N.
-
-config DVB_BUDGET_CORE
-	tristate "SAA7146 DVB cards (aka Budget, Nova-PCI)"
-	depends on DVB_CORE && PCI && I2C
-	select VIDEO_SAA7146
-	select TTPCI_EEPROM
-	help
-	  Support for simple SAA7146 based DVB cards
-	  (so called Budget- or Nova-PCI cards) without onboard
-	  MPEG2 decoder.
-
-config DVB_BUDGET
-	tristate "Budget cards"
-	depends on DVB_BUDGET_CORE && I2C
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_VES1X93 if !DVB_FE_CUSTOMISE
-	select DVB_VES1820 if !DVB_FE_CUSTOMISE
-	select DVB_L64781 if !DVB_FE_CUSTOMISE
-	select DVB_TDA8083 if !DVB_FE_CUSTOMISE
-	select DVB_S5H1420 if !DVB_FE_CUSTOMISE
-	select DVB_TDA10086 if !DVB_FE_CUSTOMISE
-	select DVB_TDA826X if !DVB_FE_CUSTOMISE
-	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
-	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
-	select DVB_ISL6423 if !DVB_FE_CUSTOMISE
-	select DVB_STV090x if !DVB_FE_CUSTOMISE
-	select DVB_STV6110x if !DVB_FE_CUSTOMISE
-	help
-	  Support for simple SAA7146 based DVB cards (so called Budget-
-	  or Nova-PCI cards) without onboard MPEG2 decoder, and without
-	  analog inputs or an onboard Common Interface connector.
-
-	  Say Y if you own such a card and want to use it.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called budget.
-
-config DVB_BUDGET_CI
-	tristate "Budget cards with onboard CI connector"
-	depends on DVB_BUDGET_CORE && I2C
-	select DVB_STV0297 if !DVB_FE_CUSTOMISE
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
-	select DVB_STB0899 if !DVB_FE_CUSTOMISE
-	select DVB_STB6100 if !DVB_FE_CUSTOMISE
-	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
-	select DVB_STV0288 if !DVB_FE_CUSTOMISE
-	select DVB_STB6000 if !DVB_FE_CUSTOMISE
-	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE
-	depends on RC_CORE
-	help
-	  Support for simple SAA7146 based DVB cards
-	  (so called Budget- or Nova-PCI cards) without onboard
-	  MPEG2 decoder, but with onboard Common Interface connector.
-
-	  Note: The Common Interface is not yet supported by this driver
-	  due to lack of information from the vendor.
-
-	  Say Y if you own such a card and want to use it.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called budget-ci.
-
-config DVB_BUDGET_AV
-	tristate "Budget cards with analog video inputs"
-	depends on DVB_BUDGET_CORE && I2C
-	select VIDEO_SAA7146_VV
-	depends on VIDEO_DEV	# dependencies of VIDEO_SAA7146_VV
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
-	select DVB_TDA10021 if !DVB_FE_CUSTOMISE
-	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
-	select DVB_STB0899 if !DVB_FE_CUSTOMISE
-	select DVB_TDA8261 if !DVB_FE_CUSTOMISE
-	select DVB_TUA6100 if !DVB_FE_CUSTOMISE
-	help
-	  Support for simple SAA7146 based DVB cards
-	  (so called Budget- or Nova-PCI cards) without onboard
-	  MPEG2 decoder, but with one or more analog video inputs.
-
-	  Say Y if you own such a card and want to use it.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called budget-av.
-
-config DVB_BUDGET_PATCH
-	tristate "AV7110 cards with Budget Patch"
-	depends on DVB_BUDGET_CORE && I2C
-	depends on DVB_AV7110
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_VES1X93 if !DVB_FE_CUSTOMISE
-	select DVB_TDA8083 if !DVB_FE_CUSTOMISE
-	help
-	  Support for Budget Patch (full TS) modification on
-	  SAA7146+AV7110 based cards (DVB-S cards). This
-	  driver doesn't use onboard MPEG2 decoder. The
-	  card is driven in Budget-only mode. Card is
-	  required to have loaded firmware to tune properly.
-	  Firmware can be loaded by insertion and removal of
-	  standard AV7110 driver prior to loading this
-	  driver.
-
-	  Say Y if you own such a card and want to use it.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called budget-patch.
diff --git a/drivers/media/dvb/ttpci/Makefile b/drivers/media/dvb/ttpci/Makefile
deleted file mode 100644
index f6e8693..0000000
--- a/drivers/media/dvb/ttpci/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Makefile for the kernel SAA7146 FULL TS DVB device driver
-# and the AV7110 DVB device driver
-#
-
-dvb-ttpci-objs := av7110_hw.o av7110_v4l.o av7110_av.o av7110_ca.o av7110.o av7110_ipack.o
-
-ifdef CONFIG_INPUT_EVDEV
-dvb-ttpci-objs += av7110_ir.o
-endif
-
-obj-$(CONFIG_TTPCI_EEPROM) += ttpci-eeprom.o
-obj-$(CONFIG_DVB_BUDGET_CORE) += budget-core.o
-obj-$(CONFIG_DVB_BUDGET) += budget.o
-obj-$(CONFIG_DVB_BUDGET_AV) += budget-av.o
-obj-$(CONFIG_DVB_BUDGET_CI) += budget-ci.o
-obj-$(CONFIG_DVB_BUDGET_PATCH) += budget-patch.o
-obj-$(CONFIG_DVB_AV7110) += dvb-ttpci.o
-
-ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
-ccflags-y += -Idrivers/media/common/tuners
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
deleted file mode 100644
index 4bd8bd5..0000000
--- a/drivers/media/dvb/ttpci/av7110.c
+++ /dev/null
@@ -1,2939 +0,0 @@
-/*
- * driver for the SAA7146 based AV110 cards (like the Fujitsu-Siemens DVB)
- * av7110.c: initialization and demux stuff
- *
- * Copyright (C) 1999-2002 Ralph  Metzler
- *                       & Marcus Metzler for convergence integrated media GmbH
- *
- * originally based on code by:
- * Copyright (C) 1998,1999 Christian Theiss <mistert@rz.fh-augsburg.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org/ 
- */
-
-
-#include <linux/module.h>
-#include <linux/kmod.h>
-#include <linux/delay.h>
-#include <linux/fs.h>
-#include <linux/timer.h>
-#include <linux/poll.h>
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <linux/vmalloc.h>
-#include <linux/firmware.h>
-#include <linux/crc32.h>
-#include <linux/i2c.h>
-#include <linux/kthread.h>
-#include <linux/slab.h>
-#include <asm/unaligned.h>
-#include <asm/byteorder.h>
-
-
-#include <linux/dvb/frontend.h>
-
-#include "dvb_frontend.h"
-
-#include "ttpci-eeprom.h"
-#include "av7110.h"
-#include "av7110_hw.h"
-#include "av7110_av.h"
-#include "av7110_ca.h"
-#include "av7110_ipack.h"
-
-#include "bsbe1.h"
-#include "lnbp21.h"
-#include "bsru6.h"
-
-#define TS_WIDTH  376
-#define TS_HEIGHT 512
-#define TS_BUFLEN (TS_WIDTH*TS_HEIGHT)
-#define TS_MAX_PACKETS (TS_BUFLEN/TS_SIZE)
-
-
-int av7110_debug;
-
-static int vidmode = CVBS_RGB_OUT;
-static int pids_off;
-static int adac = DVB_ADAC_TI;
-static int hw_sections;
-static int rgb_on;
-static int volume = 255;
-static int budgetpatch;
-static int wss_cfg_4_3 = 0x4008;
-static int wss_cfg_16_9 = 0x0007;
-static int tv_standard;
-static int full_ts;
-
-module_param_named(debug, av7110_debug, int, 0644);
-MODULE_PARM_DESC(debug, "debug level (bitmask, default 0)");
-module_param(vidmode, int, 0444);
-MODULE_PARM_DESC(vidmode,"analog video out: 0 off, 1 CVBS+RGB (default), 2 CVBS+YC, 3 YC");
-module_param(pids_off, int, 0444);
-MODULE_PARM_DESC(pids_off,"clear video/audio/PCR PID filters when demux is closed");
-module_param(adac, int, 0444);
-MODULE_PARM_DESC(adac,"audio DAC type: 0 TI, 1 CRYSTAL, 2 MSP (use if autodetection fails)");
-module_param(hw_sections, int, 0444);
-MODULE_PARM_DESC(hw_sections, "0 use software section filter, 1 use hardware");
-module_param(rgb_on, int, 0444);
-MODULE_PARM_DESC(rgb_on, "For Siemens DVB-C cards only: Enable RGB control"
-		" signal on SCART pin 16 to switch SCART video mode from CVBS to RGB");
-module_param(volume, int, 0444);
-MODULE_PARM_DESC(volume, "initial volume: default 255 (range 0-255)");
-module_param(budgetpatch, int, 0444);
-MODULE_PARM_DESC(budgetpatch, "use budget-patch hardware modification: default 0 (0 no, 1 autodetect, 2 always)");
-module_param(full_ts, int, 0444);
-MODULE_PARM_DESC(full_ts, "enable code for full-ts hardware modification: 0 disable (default), 1 enable");
-module_param(wss_cfg_4_3, int, 0444);
-MODULE_PARM_DESC(wss_cfg_4_3, "WSS 4:3 - default 0x4008 - bit 15: disable, 14: burst mode, 13..0: wss data");
-module_param(wss_cfg_16_9, int, 0444);
-MODULE_PARM_DESC(wss_cfg_16_9, "WSS 16:9 - default 0x0007 - bit 15: disable, 14: burst mode, 13..0: wss data");
-module_param(tv_standard, int, 0444);
-MODULE_PARM_DESC(tv_standard, "TV standard: 0 PAL (default), 1 NTSC");
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static void restart_feeds(struct av7110 *av7110);
-static int budget_start_feed(struct dvb_demux_feed *feed);
-static int budget_stop_feed(struct dvb_demux_feed *feed);
-
-static int av7110_num;
-
-#define FE_FUNC_OVERRIDE(fe_func, av7110_copy, av7110_func) \
-{\
-	if (fe_func != NULL) { \
-		av7110_copy = fe_func; \
-		fe_func = av7110_func; \
-	} \
-}
-
-
-static void init_av7110_av(struct av7110 *av7110)
-{
-	int ret;
-	struct saa7146_dev *dev = av7110->dev;
-
-	/* set internal volume control to maximum */
-	av7110->adac_type = DVB_ADAC_TI;
-	ret = av7110_set_volume(av7110, av7110->mixer.volume_left, av7110->mixer.volume_right);
-	if (ret < 0)
-		printk("dvb-ttpci:cannot set internal volume to maximum:%d\n",ret);
-
-	ret = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetMonitorType,
-			    1, (u16) av7110->display_ar);
-	if (ret < 0)
-		printk("dvb-ttpci: unable to set aspect ratio\n");
-	ret = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetPanScanType,
-			    1, av7110->display_panscan);
-	if (ret < 0)
-		printk("dvb-ttpci: unable to set pan scan\n");
-
-	ret = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetWSSConfig, 2, 2, wss_cfg_4_3);
-	if (ret < 0)
-		printk("dvb-ttpci: unable to configure 4:3 wss\n");
-	ret = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetWSSConfig, 2, 3, wss_cfg_16_9);
-	if (ret < 0)
-		printk("dvb-ttpci: unable to configure 16:9 wss\n");
-
-	ret = av7710_set_video_mode(av7110, vidmode);
-	if (ret < 0)
-		printk("dvb-ttpci:cannot set video mode:%d\n",ret);
-
-	/* handle different card types */
-	/* remaining inits according to card and frontend type */
-	av7110->analog_tuner_flags = 0;
-	av7110->current_input = 0;
-	if (dev->pci->subsystem_vendor == 0x13c2 && dev->pci->subsystem_device == 0x000a)
-		av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, ADSwitch, 1, 0); // SPDIF on
-	if (i2c_writereg(av7110, 0x20, 0x00, 0x00) == 1) {
-		printk ("dvb-ttpci: Crystal audio DAC @ card %d detected\n",
-			av7110->dvb_adapter.num);
-		av7110->adac_type = DVB_ADAC_CRYSTAL;
-		i2c_writereg(av7110, 0x20, 0x01, 0xd2);
-		i2c_writereg(av7110, 0x20, 0x02, 0x49);
-		i2c_writereg(av7110, 0x20, 0x03, 0x00);
-		i2c_writereg(av7110, 0x20, 0x04, 0x00);
-
-		/**
-		 * some special handling for the Siemens DVB-C cards...
-		 */
-	} else if (0 == av7110_init_analog_module(av7110)) {
-		/* done. */
-	}
-	else if (dev->pci->subsystem_vendor == 0x110a) {
-		printk("dvb-ttpci: DVB-C w/o analog module @ card %d detected\n",
-			av7110->dvb_adapter.num);
-		av7110->adac_type = DVB_ADAC_NONE;
-	}
-	else {
-		av7110->adac_type = adac;
-		printk("dvb-ttpci: adac type set to %d @ card %d\n",
-			av7110->adac_type, av7110->dvb_adapter.num);
-	}
-
-	if (av7110->adac_type == DVB_ADAC_NONE || av7110->adac_type == DVB_ADAC_MSP34x0) {
-		// switch DVB SCART on
-		ret = av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, MainSwitch, 1, 0);
-		if (ret < 0)
-			printk("dvb-ttpci:cannot switch on SCART(Main):%d\n",ret);
-		ret = av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, ADSwitch, 1, 1);
-		if (ret < 0)
-			printk("dvb-ttpci:cannot switch on SCART(AD):%d\n",ret);
-		if (rgb_on &&
-		    ((av7110->dev->pci->subsystem_vendor == 0x110a) ||
-		     (av7110->dev->pci->subsystem_vendor == 0x13c2)) &&
-		     (av7110->dev->pci->subsystem_device == 0x0000)) {
-			saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); // RGB on, SCART pin 16
-			//saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); // SCARTpin 8
-		}
-	}
-
-	if (dev->pci->subsystem_vendor == 0x13c2 && dev->pci->subsystem_device == 0x000e)
-		av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, SpdifSwitch, 1, 0); // SPDIF on
-
-	ret = av7110_set_volume(av7110, av7110->mixer.volume_left, av7110->mixer.volume_right);
-	if (ret < 0)
-		printk("dvb-ttpci:cannot set volume :%d\n",ret);
-}
-
-static void recover_arm(struct av7110 *av7110)
-{
-	dprintk(4, "%p\n",av7110);
-
-	av7110_bootarm(av7110);
-	msleep(100);
-
-	init_av7110_av(av7110);
-
-	/* card-specific recovery */
-	if (av7110->recover)
-		av7110->recover(av7110);
-
-	restart_feeds(av7110);
-
-#if defined(CONFIG_INPUT_EVDEV) || defined(CONFIG_INPUT_EVDEV_MODULE)
-	av7110_check_ir_config(av7110, true);
-#endif
-}
-
-static void av7110_arm_sync(struct av7110 *av7110)
-{
-	if (av7110->arm_thread)
-		kthread_stop(av7110->arm_thread);
-
-	av7110->arm_thread = NULL;
-}
-
-static int arm_thread(void *data)
-{
-	struct av7110 *av7110 = data;
-	u16 newloops = 0;
-	int timeout;
-
-	dprintk(4, "%p\n",av7110);
-
-	for (;;) {
-		timeout = wait_event_interruptible_timeout(av7110->arm_wait,
-			kthread_should_stop(), 5 * HZ);
-
-		if (-ERESTARTSYS == timeout || kthread_should_stop()) {
-			/* got signal or told to quit*/
-			break;
-		}
-
-		if (!av7110->arm_ready)
-			continue;
-
-#if defined(CONFIG_INPUT_EVDEV) || defined(CONFIG_INPUT_EVDEV_MODULE)
-		av7110_check_ir_config(av7110, false);
-#endif
-
-		if (mutex_lock_interruptible(&av7110->dcomlock))
-			break;
-		newloops = rdebi(av7110, DEBINOSWAP, STATUS_LOOPS, 0, 2);
-		mutex_unlock(&av7110->dcomlock);
-
-		if (newloops == av7110->arm_loops || av7110->arm_errors > 3) {
-			printk(KERN_ERR "dvb-ttpci: ARM crashed @ card %d\n",
-			       av7110->dvb_adapter.num);
-
-			recover_arm(av7110);
-
-			if (mutex_lock_interruptible(&av7110->dcomlock))
-				break;
-			newloops = rdebi(av7110, DEBINOSWAP, STATUS_LOOPS, 0, 2) - 1;
-			mutex_unlock(&av7110->dcomlock);
-		}
-		av7110->arm_loops = newloops;
-		av7110->arm_errors = 0;
-	}
-
-	return 0;
-}
-
-
-/****************************************************************************
- * IRQ handling
- ****************************************************************************/
-
-static int DvbDmxFilterCallback(u8 *buffer1, size_t buffer1_len,
-				u8 *buffer2, size_t buffer2_len,
-				struct dvb_demux_filter *dvbdmxfilter,
-				enum dmx_success success,
-				struct av7110 *av7110)
-{
-	if (!dvbdmxfilter->feed->demux->dmx.frontend)
-		return 0;
-	if (dvbdmxfilter->feed->demux->dmx.frontend->source == DMX_MEMORY_FE)
-		return 0;
-
-	switch (dvbdmxfilter->type) {
-	case DMX_TYPE_SEC:
-		if ((((buffer1[1] << 8) | buffer1[2]) & 0xfff) + 3 != buffer1_len)
-			return 0;
-		if (dvbdmxfilter->doneq) {
-			struct dmx_section_filter *filter = &dvbdmxfilter->filter;
-			int i;
-			u8 xor, neq = 0;
-
-			for (i = 0; i < DVB_DEMUX_MASK_MAX; i++) {
-				xor = filter->filter_value[i] ^ buffer1[i];
-				neq |= dvbdmxfilter->maskandnotmode[i] & xor;
-			}
-			if (!neq)
-				return 0;
-		}
-		return dvbdmxfilter->feed->cb.sec(buffer1, buffer1_len,
-						  buffer2, buffer2_len,
-						  &dvbdmxfilter->filter,
-						  DMX_OK);
-	case DMX_TYPE_TS:
-		if (!(dvbdmxfilter->feed->ts_type & TS_PACKET))
-			return 0;
-		if (dvbdmxfilter->feed->ts_type & TS_PAYLOAD_ONLY)
-			return dvbdmxfilter->feed->cb.ts(buffer1, buffer1_len,
-							 buffer2, buffer2_len,
-							 &dvbdmxfilter->feed->feed.ts,
-							 DMX_OK);
-		else
-			av7110_p2t_write(buffer1, buffer1_len,
-					 dvbdmxfilter->feed->pid,
-					 &av7110->p2t_filter[dvbdmxfilter->index]);
-	default:
-		return 0;
-	}
-}
-
-
-//#define DEBUG_TIMING
-static inline void print_time(char *s)
-{
-#ifdef DEBUG_TIMING
-	struct timeval tv;
-	do_gettimeofday(&tv);
-	printk("%s: %d.%d\n", s, (int)tv.tv_sec, (int)tv.tv_usec);
-#endif
-}
-
-#define DEBI_READ 0
-#define DEBI_WRITE 1
-static inline void start_debi_dma(struct av7110 *av7110, int dir,
-				  unsigned long addr, unsigned int len)
-{
-	dprintk(8, "%c %08lx %u\n", dir == DEBI_READ ? 'R' : 'W', addr, len);
-	if (saa7146_wait_for_debi_done(av7110->dev, 0)) {
-		printk(KERN_ERR "%s: saa7146_wait_for_debi_done timed out\n", __func__);
-		return;
-	}
-
-	SAA7146_ISR_CLEAR(av7110->dev, MASK_19); /* for good measure */
-	SAA7146_IER_ENABLE(av7110->dev, MASK_19);
-	if (len < 5)
-		len = 5; /* we want a real DEBI DMA */
-	if (dir == DEBI_WRITE)
-		iwdebi(av7110, DEBISWAB, addr, 0, (len + 3) & ~3);
-	else
-		irdebi(av7110, DEBISWAB, addr, 0, len);
-}
-
-static void debiirq(unsigned long cookie)
-{
-	struct av7110 *av7110 = (struct av7110 *)cookie;
-	int type = av7110->debitype;
-	int handle = (type >> 8) & 0x1f;
-	unsigned int xfer = 0;
-
-	print_time("debi");
-	dprintk(4, "type 0x%04x\n", type);
-
-	if (type == -1) {
-		printk("DEBI irq oops @ %ld, psr:0x%08x, ssr:0x%08x\n",
-		       jiffies, saa7146_read(av7110->dev, PSR),
-		       saa7146_read(av7110->dev, SSR));
-		goto debi_done;
-	}
-	av7110->debitype = -1;
-
-	switch (type & 0xff) {
-
-	case DATA_TS_RECORD:
-		dvb_dmx_swfilter_packets(&av7110->demux,
-					 (const u8 *) av7110->debi_virt,
-					 av7110->debilen / 188);
-		xfer = RX_BUFF;
-		break;
-
-	case DATA_PES_RECORD:
-		if (av7110->demux.recording)
-			av7110_record_cb(&av7110->p2t[handle],
-					 (u8 *) av7110->debi_virt,
-					 av7110->debilen);
-		xfer = RX_BUFF;
-		break;
-
-	case DATA_IPMPE:
-	case DATA_FSECTION:
-	case DATA_PIPING:
-		if (av7110->handle2filter[handle])
-			DvbDmxFilterCallback((u8 *)av7110->debi_virt,
-					     av7110->debilen, NULL, 0,
-					     av7110->handle2filter[handle],
-					     DMX_OK, av7110);
-		xfer = RX_BUFF;
-		break;
-
-	case DATA_CI_GET:
-	{
-		u8 *data = av7110->debi_virt;
-
-		if ((data[0] < 2) && data[2] == 0xff) {
-			int flags = 0;
-			if (data[5] > 0)
-				flags |= CA_CI_MODULE_PRESENT;
-			if (data[5] > 5)
-				flags |= CA_CI_MODULE_READY;
-			av7110->ci_slot[data[0]].flags = flags;
-		} else
-			ci_get_data(&av7110->ci_rbuffer,
-				    av7110->debi_virt,
-				    av7110->debilen);
-		xfer = RX_BUFF;
-		break;
-	}
-
-	case DATA_COMMON_INTERFACE:
-		CI_handle(av7110, (u8 *)av7110->debi_virt, av7110->debilen);
-#if 0
-	{
-		int i;
-
-		printk("av7110%d: ", av7110->num);
-		printk("%02x ", *(u8 *)av7110->debi_virt);
-		printk("%02x ", *(1+(u8 *)av7110->debi_virt));
-		for (i = 2; i < av7110->debilen; i++)
-			printk("%02x ", (*(i+(unsigned char *)av7110->debi_virt)));
-		for (i = 2; i < av7110->debilen; i++)
-			printk("%c", chtrans(*(i+(unsigned char *)av7110->debi_virt)));
-
-		printk("\n");
-	}
-#endif
-		xfer = RX_BUFF;
-		break;
-
-	case DATA_DEBUG_MESSAGE:
-		((s8*)av7110->debi_virt)[Reserved_SIZE - 1] = 0;
-		printk("%s\n", (s8 *) av7110->debi_virt);
-		xfer = RX_BUFF;
-		break;
-
-	case DATA_CI_PUT:
-		dprintk(4, "debi DATA_CI_PUT\n");
-	case DATA_MPEG_PLAY:
-		dprintk(4, "debi DATA_MPEG_PLAY\n");
-	case DATA_BMP_LOAD:
-		dprintk(4, "debi DATA_BMP_LOAD\n");
-		xfer = TX_BUFF;
-		break;
-	default:
-		break;
-	}
-debi_done:
-	spin_lock(&av7110->debilock);
-	if (xfer)
-		iwdebi(av7110, DEBINOSWAP, xfer, 0, 2);
-	ARM_ClearMailBox(av7110);
-	spin_unlock(&av7110->debilock);
-}
-
-/* irq from av7110 firmware writing the mailbox register in the DPRAM */
-static void gpioirq(unsigned long cookie)
-{
-	struct av7110 *av7110 = (struct av7110 *)cookie;
-	u32 rxbuf, txbuf;
-	int len;
-
-	if (av7110->debitype != -1)
-		/* we shouldn't get any irq while a debi xfer is running */
-		printk("dvb-ttpci: GPIO0 irq oops @ %ld, psr:0x%08x, ssr:0x%08x\n",
-		       jiffies, saa7146_read(av7110->dev, PSR),
-		       saa7146_read(av7110->dev, SSR));
-
-	if (saa7146_wait_for_debi_done(av7110->dev, 0)) {
-		printk(KERN_ERR "%s: saa7146_wait_for_debi_done timed out\n", __func__);
-		BUG(); /* maybe we should try resetting the debi? */
-	}
-
-	spin_lock(&av7110->debilock);
-	ARM_ClearIrq(av7110);
-
-	/* see what the av7110 wants */
-	av7110->debitype = irdebi(av7110, DEBINOSWAP, IRQ_STATE, 0, 2);
-	av7110->debilen  = irdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2);
-	rxbuf = irdebi(av7110, DEBINOSWAP, RX_BUFF, 0, 2);
-	txbuf = irdebi(av7110, DEBINOSWAP, TX_BUFF, 0, 2);
-	len = (av7110->debilen + 3) & ~3;
-
-	print_time("gpio");
-	dprintk(8, "GPIO0 irq 0x%04x %d\n", av7110->debitype, av7110->debilen);
-
-	switch (av7110->debitype & 0xff) {
-
-	case DATA_TS_PLAY:
-	case DATA_PES_PLAY:
-		break;
-
-	case DATA_MPEG_VIDEO_EVENT:
-	{
-		u32 h_ar;
-		struct video_event event;
-
-		av7110->video_size.w = irdebi(av7110, DEBINOSWAP, STATUS_MPEG_WIDTH, 0, 2);
-		h_ar = irdebi(av7110, DEBINOSWAP, STATUS_MPEG_HEIGHT_AR, 0, 2);
-
-		iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2);
-		iwdebi(av7110, DEBINOSWAP, RX_BUFF, 0, 2);
-
-		av7110->video_size.h = h_ar & 0xfff;
-
-		event.type = VIDEO_EVENT_SIZE_CHANGED;
-		event.u.size.w = av7110->video_size.w;
-		event.u.size.h = av7110->video_size.h;
-		switch ((h_ar >> 12) & 0xf)
-		{
-		case 3:
-			av7110->video_size.aspect_ratio = VIDEO_FORMAT_16_9;
-			event.u.size.aspect_ratio = VIDEO_FORMAT_16_9;
-			av7110->videostate.video_format = VIDEO_FORMAT_16_9;
-			break;
-		case 4:
-			av7110->video_size.aspect_ratio = VIDEO_FORMAT_221_1;
-			event.u.size.aspect_ratio = VIDEO_FORMAT_221_1;
-			av7110->videostate.video_format = VIDEO_FORMAT_221_1;
-			break;
-		default:
-			av7110->video_size.aspect_ratio = VIDEO_FORMAT_4_3;
-			event.u.size.aspect_ratio = VIDEO_FORMAT_4_3;
-			av7110->videostate.video_format = VIDEO_FORMAT_4_3;
-		}
-
-		dprintk(8, "GPIO0 irq: DATA_MPEG_VIDEO_EVENT: w/h/ar = %u/%u/%u\n",
-			av7110->video_size.w, av7110->video_size.h,
-			av7110->video_size.aspect_ratio);
-
-		dvb_video_add_event(av7110, &event);
-		break;
-	}
-
-	case DATA_CI_PUT:
-	{
-		int avail;
-		struct dvb_ringbuffer *cibuf = &av7110->ci_wbuffer;
-
-		avail = dvb_ringbuffer_avail(cibuf);
-		if (avail <= 2) {
-			iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2);
-			iwdebi(av7110, DEBINOSWAP, TX_LEN, 0, 2);
-			iwdebi(av7110, DEBINOSWAP, TX_BUFF, 0, 2);
-			break;
-		}
-		len = DVB_RINGBUFFER_PEEK(cibuf, 0) << 8;
-		len |= DVB_RINGBUFFER_PEEK(cibuf, 1);
-		if (avail < len + 2) {
-			iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2);
-			iwdebi(av7110, DEBINOSWAP, TX_LEN, 0, 2);
-			iwdebi(av7110, DEBINOSWAP, TX_BUFF, 0, 2);
-			break;
-		}
-		DVB_RINGBUFFER_SKIP(cibuf, 2);
-
-		dvb_ringbuffer_read(cibuf, av7110->debi_virt, len);
-
-		iwdebi(av7110, DEBINOSWAP, TX_LEN, len, 2);
-		iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, len, 2);
-		dprintk(8, "DMA: CI\n");
-		start_debi_dma(av7110, DEBI_WRITE, DPRAM_BASE + txbuf, len);
-		spin_unlock(&av7110->debilock);
-		wake_up(&cibuf->queue);
-		return;
-	}
-
-	case DATA_MPEG_PLAY:
-		if (!av7110->playing) {
-			iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2);
-			iwdebi(av7110, DEBINOSWAP, TX_LEN, 0, 2);
-			iwdebi(av7110, DEBINOSWAP, TX_BUFF, 0, 2);
-			break;
-		}
-		len = 0;
-		if (av7110->debitype & 0x100) {
-			spin_lock(&av7110->aout.lock);
-			len = av7110_pes_play(av7110->debi_virt, &av7110->aout, 2048);
-			spin_unlock(&av7110->aout.lock);
-		}
-		if (len <= 0 && (av7110->debitype & 0x200)
-		    &&av7110->videostate.play_state != VIDEO_FREEZED) {
-			spin_lock(&av7110->avout.lock);
-			len = av7110_pes_play(av7110->debi_virt, &av7110->avout, 2048);
-			spin_unlock(&av7110->avout.lock);
-		}
-		if (len <= 0) {
-			iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2);
-			iwdebi(av7110, DEBINOSWAP, TX_LEN, 0, 2);
-			iwdebi(av7110, DEBINOSWAP, TX_BUFF, 0, 2);
-			break;
-		}
-		dprintk(8, "GPIO0 PES_PLAY len=%04x\n", len);
-		iwdebi(av7110, DEBINOSWAP, TX_LEN, len, 2);
-		iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, len, 2);
-		dprintk(8, "DMA: MPEG_PLAY\n");
-		start_debi_dma(av7110, DEBI_WRITE, DPRAM_BASE + txbuf, len);
-		spin_unlock(&av7110->debilock);
-		return;
-
-	case DATA_BMP_LOAD:
-		len = av7110->debilen;
-		dprintk(8, "gpio DATA_BMP_LOAD len %d\n", len);
-		if (!len) {
-			av7110->bmp_state = BMP_LOADED;
-			iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2);
-			iwdebi(av7110, DEBINOSWAP, TX_LEN, 0, 2);
-			iwdebi(av7110, DEBINOSWAP, TX_BUFF, 0, 2);
-			wake_up(&av7110->bmpq);
-			dprintk(8, "gpio DATA_BMP_LOAD done\n");
-			break;
-		}
-		if (len > av7110->bmplen)
-			len = av7110->bmplen;
-		if (len > 2 * 1024)
-			len = 2 * 1024;
-		iwdebi(av7110, DEBINOSWAP, TX_LEN, len, 2);
-		iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, len, 2);
-		memcpy(av7110->debi_virt, av7110->bmpbuf+av7110->bmpp, len);
-		av7110->bmpp += len;
-		av7110->bmplen -= len;
-		dprintk(8, "gpio DATA_BMP_LOAD DMA len %d\n", len);
-		start_debi_dma(av7110, DEBI_WRITE, DPRAM_BASE+txbuf, len);
-		spin_unlock(&av7110->debilock);
-		return;
-
-	case DATA_CI_GET:
-	case DATA_COMMON_INTERFACE:
-	case DATA_FSECTION:
-	case DATA_IPMPE:
-	case DATA_PIPING:
-		if (!len || len > 4 * 1024) {
-			iwdebi(av7110, DEBINOSWAP, RX_BUFF, 0, 2);
-			break;
-		}
-		/* fall through */
-
-	case DATA_TS_RECORD:
-	case DATA_PES_RECORD:
-		dprintk(8, "DMA: TS_REC etc.\n");
-		start_debi_dma(av7110, DEBI_READ, DPRAM_BASE+rxbuf, len);
-		spin_unlock(&av7110->debilock);
-		return;
-
-	case DATA_DEBUG_MESSAGE:
-		if (!len || len > 0xff) {
-			iwdebi(av7110, DEBINOSWAP, RX_BUFF, 0, 2);
-			break;
-		}
-		start_debi_dma(av7110, DEBI_READ, Reserved, len);
-		spin_unlock(&av7110->debilock);
-		return;
-
-	case DATA_IRCOMMAND:
-		if (av7110->ir.ir_handler)
-			av7110->ir.ir_handler(av7110,
-				swahw32(irdebi(av7110, DEBINOSWAP, Reserved, 0, 4)));
-		iwdebi(av7110, DEBINOSWAP, RX_BUFF, 0, 2);
-		break;
-
-	default:
-		printk("dvb-ttpci: gpioirq unknown type=%d len=%d\n",
-		       av7110->debitype, av7110->debilen);
-		break;
-	}
-	av7110->debitype = -1;
-	ARM_ClearMailBox(av7110);
-	spin_unlock(&av7110->debilock);
-}
-
-
-#ifdef CONFIG_DVB_AV7110_OSD
-static int dvb_osd_ioctl(struct file *file,
-			 unsigned int cmd, void *parg)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct av7110 *av7110 = dvbdev->priv;
-
-	dprintk(4, "%p\n", av7110);
-
-	if (cmd == OSD_SEND_CMD)
-		return av7110_osd_cmd(av7110, (osd_cmd_t *) parg);
-	if (cmd == OSD_GET_CAPABILITY)
-		return av7110_osd_capability(av7110, (osd_cap_t *) parg);
-
-	return -EINVAL;
-}
-
-
-static const struct file_operations dvb_osd_fops = {
-	.owner		= THIS_MODULE,
-	.unlocked_ioctl	= dvb_generic_ioctl,
-	.open		= dvb_generic_open,
-	.release	= dvb_generic_release,
-	.llseek		= noop_llseek,
-};
-
-static struct dvb_device dvbdev_osd = {
-	.priv		= NULL,
-	.users		= 1,
-	.writers	= 1,
-	.fops		= &dvb_osd_fops,
-	.kernel_ioctl	= dvb_osd_ioctl,
-};
-#endif /* CONFIG_DVB_AV7110_OSD */
-
-
-static inline int SetPIDs(struct av7110 *av7110, u16 vpid, u16 apid, u16 ttpid,
-			  u16 subpid, u16 pcrpid)
-{
-	u16 aflags = 0;
-
-	dprintk(4, "%p\n", av7110);
-
-	if (vpid == 0x1fff || apid == 0x1fff ||
-	    ttpid == 0x1fff || subpid == 0x1fff || pcrpid == 0x1fff) {
-		vpid = apid = ttpid = subpid = pcrpid = 0;
-		av7110->pids[DMX_PES_VIDEO] = 0;
-		av7110->pids[DMX_PES_AUDIO] = 0;
-		av7110->pids[DMX_PES_TELETEXT] = 0;
-		av7110->pids[DMX_PES_PCR] = 0;
-	}
-
-	if (av7110->audiostate.bypass_mode)
-		aflags |= 0x8000;
-
-	return av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, MultiPID, 6,
-			     pcrpid, vpid, apid, ttpid, subpid, aflags);
-}
-
-int ChangePIDs(struct av7110 *av7110, u16 vpid, u16 apid, u16 ttpid,
-		u16 subpid, u16 pcrpid)
-{
-	int ret = 0;
-	dprintk(4, "%p\n", av7110);
-
-	if (mutex_lock_interruptible(&av7110->pid_mutex))
-		return -ERESTARTSYS;
-
-	if (!(vpid & 0x8000))
-		av7110->pids[DMX_PES_VIDEO] = vpid;
-	if (!(apid & 0x8000))
-		av7110->pids[DMX_PES_AUDIO] = apid;
-	if (!(ttpid & 0x8000))
-		av7110->pids[DMX_PES_TELETEXT] = ttpid;
-	if (!(pcrpid & 0x8000))
-		av7110->pids[DMX_PES_PCR] = pcrpid;
-
-	av7110->pids[DMX_PES_SUBTITLE] = 0;
-
-	if (av7110->fe_synced) {
-		pcrpid = av7110->pids[DMX_PES_PCR];
-		ret = SetPIDs(av7110, vpid, apid, ttpid, subpid, pcrpid);
-	}
-
-	mutex_unlock(&av7110->pid_mutex);
-	return ret;
-}
-
-
-/******************************************************************************
- * hardware filter functions
- ******************************************************************************/
-
-static int StartHWFilter(struct dvb_demux_filter *dvbdmxfilter)
-{
-	struct dvb_demux_feed *dvbdmxfeed = dvbdmxfilter->feed;
-	struct av7110 *av7110 = dvbdmxfeed->demux->priv;
-	u16 buf[20];
-	int ret, i;
-	u16 handle;
-//	u16 mode = 0x0320;
-	u16 mode = 0xb96a;
-
-	dprintk(4, "%p\n", av7110);
-
-	if (av7110->full_ts)
-		return 0;
-
-	if (dvbdmxfilter->type == DMX_TYPE_SEC) {
-		if (hw_sections) {
-			buf[4] = (dvbdmxfilter->filter.filter_value[0] << 8) |
-				dvbdmxfilter->maskandmode[0];
-			for (i = 3; i < 18; i++)
-				buf[i + 4 - 2] =
-					(dvbdmxfilter->filter.filter_value[i] << 8) |
-					dvbdmxfilter->maskandmode[i];
-			mode = 4;
-		}
-	} else if ((dvbdmxfeed->ts_type & TS_PACKET) &&
-		   !(dvbdmxfeed->ts_type & TS_PAYLOAD_ONLY)) {
-		av7110_p2t_init(&av7110->p2t_filter[dvbdmxfilter->index], dvbdmxfeed);
-	}
-
-	buf[0] = (COMTYPE_PID_FILTER << 8) + AddPIDFilter;
-	buf[1] = 16;
-	buf[2] = dvbdmxfeed->pid;
-	buf[3] = mode;
-
-	ret = av7110_fw_request(av7110, buf, 20, &handle, 1);
-	if (ret != 0 || handle >= 32) {
-		printk("dvb-ttpci: %s error  buf %04x %04x %04x %04x  "
-				"ret %d  handle %04x\n",
-				__func__, buf[0], buf[1], buf[2], buf[3],
-				ret, handle);
-		dvbdmxfilter->hw_handle = 0xffff;
-		if (!ret)
-			ret = -1;
-		return ret;
-	}
-
-	av7110->handle2filter[handle] = dvbdmxfilter;
-	dvbdmxfilter->hw_handle = handle;
-
-	return ret;
-}
-
-static int StopHWFilter(struct dvb_demux_filter *dvbdmxfilter)
-{
-	struct av7110 *av7110 = dvbdmxfilter->feed->demux->priv;
-	u16 buf[3];
-	u16 answ[2];
-	int ret;
-	u16 handle;
-
-	dprintk(4, "%p\n", av7110);
-
-	if (av7110->full_ts)
-		return 0;
-
-	handle = dvbdmxfilter->hw_handle;
-	if (handle >= 32) {
-		printk("%s tried to stop invalid filter %04x, filter type = %x\n",
-				__func__, handle, dvbdmxfilter->type);
-		return -EINVAL;
-	}
-
-	av7110->handle2filter[handle] = NULL;
-
-	buf[0] = (COMTYPE_PID_FILTER << 8) + DelPIDFilter;
-	buf[1] = 1;
-	buf[2] = handle;
-	ret = av7110_fw_request(av7110, buf, 3, answ, 2);
-	if (ret != 0 || answ[1] != handle) {
-		printk("dvb-ttpci: %s error  cmd %04x %04x %04x  ret %x  "
-				"resp %04x %04x  pid %d\n",
-				__func__, buf[0], buf[1], buf[2], ret,
-				answ[0], answ[1], dvbdmxfilter->feed->pid);
-		if (!ret)
-			ret = -1;
-	}
-	return ret;
-}
-
-
-static int dvb_feed_start_pid(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
-	struct av7110 *av7110 = dvbdmx->priv;
-	u16 *pid = dvbdmx->pids, npids[5];
-	int i;
-	int ret = 0;
-
-	dprintk(4, "%p\n", av7110);
-
-	npids[0] = npids[1] = npids[2] = npids[3] = npids[4] = 0xffff;
-	i = dvbdmxfeed->pes_type;
-	npids[i] = (pid[i]&0x8000) ? 0 : pid[i];
-	if ((i == 2) && npids[i] && (dvbdmxfeed->ts_type & TS_PACKET)) {
-		npids[i] = 0;
-		ret = ChangePIDs(av7110, npids[1], npids[0], npids[2], npids[3], npids[4]);
-		if (!ret)
-			ret = StartHWFilter(dvbdmxfeed->filter);
-		return ret;
-	}
-	if (dvbdmxfeed->pes_type <= 2 || dvbdmxfeed->pes_type == 4) {
-		ret = ChangePIDs(av7110, npids[1], npids[0], npids[2], npids[3], npids[4]);
-		if (ret)
-			return ret;
-	}
-
-	if (dvbdmxfeed->pes_type < 2 && npids[0])
-		if (av7110->fe_synced)
-		{
-			ret = av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, Scan, 0);
-			if (ret)
-				return ret;
-		}
-
-	if ((dvbdmxfeed->ts_type & TS_PACKET) && !av7110->full_ts) {
-		if (dvbdmxfeed->pes_type == 0 && !(dvbdmx->pids[0] & 0x8000))
-			ret = av7110_av_start_record(av7110, RP_AUDIO, dvbdmxfeed);
-		if (dvbdmxfeed->pes_type == 1 && !(dvbdmx->pids[1] & 0x8000))
-			ret = av7110_av_start_record(av7110, RP_VIDEO, dvbdmxfeed);
-	}
-	return ret;
-}
-
-static int dvb_feed_stop_pid(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
-	struct av7110 *av7110 = dvbdmx->priv;
-	u16 *pid = dvbdmx->pids, npids[5];
-	int i;
-
-	int ret = 0;
-
-	dprintk(4, "%p\n", av7110);
-
-	if (dvbdmxfeed->pes_type <= 1) {
-		ret = av7110_av_stop(av7110, dvbdmxfeed->pes_type ?  RP_VIDEO : RP_AUDIO);
-		if (ret)
-			return ret;
-		if (!av7110->rec_mode)
-			dvbdmx->recording = 0;
-		if (!av7110->playing)
-			dvbdmx->playing = 0;
-	}
-	npids[0] = npids[1] = npids[2] = npids[3] = npids[4] = 0xffff;
-	i = dvbdmxfeed->pes_type;
-	switch (i) {
-	case 2: //teletext
-		if (dvbdmxfeed->ts_type & TS_PACKET)
-			ret = StopHWFilter(dvbdmxfeed->filter);
-		npids[2] = 0;
-		break;
-	case 0:
-	case 1:
-	case 4:
-		if (!pids_off)
-			return 0;
-		npids[i] = (pid[i]&0x8000) ? 0 : pid[i];
-		break;
-	}
-	if (!ret)
-		ret = ChangePIDs(av7110, npids[1], npids[0], npids[2], npids[3], npids[4]);
-	return ret;
-}
-
-static int av7110_start_feed(struct dvb_demux_feed *feed)
-{
-	struct dvb_demux *demux = feed->demux;
-	struct av7110 *av7110 = demux->priv;
-	int ret = 0;
-
-	dprintk(4, "%p\n", av7110);
-
-	if (!demux->dmx.frontend)
-		return -EINVAL;
-
-	if (!av7110->full_ts && feed->pid > 0x1fff)
-		return -EINVAL;
-
-	if (feed->type == DMX_TYPE_TS) {
-		if ((feed->ts_type & TS_DECODER) &&
-		    (feed->pes_type <= DMX_TS_PES_PCR)) {
-			switch (demux->dmx.frontend->source) {
-			case DMX_MEMORY_FE:
-				if (feed->ts_type & TS_DECODER)
-				       if (feed->pes_type < 2 &&
-					   !(demux->pids[0] & 0x8000) &&
-					   !(demux->pids[1] & 0x8000)) {
-					       dvb_ringbuffer_flush_spinlock_wakeup(&av7110->avout);
-					       dvb_ringbuffer_flush_spinlock_wakeup(&av7110->aout);
-					       ret = av7110_av_start_play(av7110,RP_AV);
-					       if (!ret)
-						       demux->playing = 1;
-					}
-				break;
-			default:
-				ret = dvb_feed_start_pid(feed);
-				break;
-			}
-		} else if ((feed->ts_type & TS_PACKET) &&
-			   (demux->dmx.frontend->source != DMX_MEMORY_FE)) {
-			ret = StartHWFilter(feed->filter);
-		}
-	}
-
-	if (av7110->full_ts) {
-		budget_start_feed(feed);
-		return ret;
-	}
-
-	if (feed->type == DMX_TYPE_SEC) {
-		int i;
-
-		for (i = 0; i < demux->filternum; i++) {
-			if (demux->filter[i].state != DMX_STATE_READY)
-				continue;
-			if (demux->filter[i].type != DMX_TYPE_SEC)
-				continue;
-			if (demux->filter[i].filter.parent != &feed->feed.sec)
-				continue;
-			demux->filter[i].state = DMX_STATE_GO;
-			if (demux->dmx.frontend->source != DMX_MEMORY_FE) {
-				ret = StartHWFilter(&demux->filter[i]);
-				if (ret)
-					break;
-			}
-		}
-	}
-
-	return ret;
-}
-
-
-static int av7110_stop_feed(struct dvb_demux_feed *feed)
-{
-	struct dvb_demux *demux = feed->demux;
-	struct av7110 *av7110 = demux->priv;
-	int i, rc, ret = 0;
-	dprintk(4, "%p\n", av7110);
-
-	if (feed->type == DMX_TYPE_TS) {
-		if (feed->ts_type & TS_DECODER) {
-			if (feed->pes_type >= DMX_TS_PES_OTHER ||
-			    !demux->pesfilter[feed->pes_type])
-				return -EINVAL;
-			demux->pids[feed->pes_type] |= 0x8000;
-			demux->pesfilter[feed->pes_type] = NULL;
-		}
-		if (feed->ts_type & TS_DECODER &&
-		    feed->pes_type < DMX_TS_PES_OTHER) {
-			ret = dvb_feed_stop_pid(feed);
-		} else
-			if ((feed->ts_type & TS_PACKET) &&
-			    (demux->dmx.frontend->source != DMX_MEMORY_FE))
-				ret = StopHWFilter(feed->filter);
-	}
-
-	if (av7110->full_ts) {
-		budget_stop_feed(feed);
-		return ret;
-	}
-
-	if (feed->type == DMX_TYPE_SEC) {
-		for (i = 0; i<demux->filternum; i++) {
-			if (demux->filter[i].state == DMX_STATE_GO &&
-			    demux->filter[i].filter.parent == &feed->feed.sec) {
-				demux->filter[i].state = DMX_STATE_READY;
-				if (demux->dmx.frontend->source != DMX_MEMORY_FE) {
-					rc = StopHWFilter(&demux->filter[i]);
-					if (!ret)
-						ret = rc;
-					/* keep going, stop as many filters as possible */
-				}
-			}
-		}
-	}
-
-	return ret;
-}
-
-
-static void restart_feeds(struct av7110 *av7110)
-{
-	struct dvb_demux *dvbdmx = &av7110->demux;
-	struct dvb_demux_feed *feed;
-	int mode;
-	int feeding;
-	int i, j;
-
-	dprintk(4, "%p\n", av7110);
-
-	mode = av7110->playing;
-	av7110->playing = 0;
-	av7110->rec_mode = 0;
-
-	feeding = av7110->feeding1; /* full_ts mod */
-
-	for (i = 0; i < dvbdmx->feednum; i++) {
-		feed = &dvbdmx->feed[i];
-		if (feed->state == DMX_STATE_GO) {
-			if (feed->type == DMX_TYPE_SEC) {
-				for (j = 0; j < dvbdmx->filternum; j++) {
-					if (dvbdmx->filter[j].type != DMX_TYPE_SEC)
-						continue;
-					if (dvbdmx->filter[j].filter.parent != &feed->feed.sec)
-						continue;
-					if (dvbdmx->filter[j].state == DMX_STATE_GO)
-						dvbdmx->filter[j].state = DMX_STATE_READY;
-				}
-			}
-			av7110_start_feed(feed);
-		}
-	}
-
-	av7110->feeding1 = feeding; /* full_ts mod */
-
-	if (mode)
-		av7110_av_start_play(av7110, mode);
-}
-
-static int dvb_get_stc(struct dmx_demux *demux, unsigned int num,
-		       uint64_t *stc, unsigned int *base)
-{
-	int ret;
-	u16 fwstc[4];
-	u16 tag = ((COMTYPE_REQUEST << 8) + ReqSTC);
-	struct dvb_demux *dvbdemux;
-	struct av7110 *av7110;
-
-	/* pointer casting paranoia... */
-	BUG_ON(!demux);
-	dvbdemux = demux->priv;
-	BUG_ON(!dvbdemux);
-	av7110 = dvbdemux->priv;
-
-	dprintk(4, "%p\n", av7110);
-
-	if (num != 0)
-		return -EINVAL;
-
-	ret = av7110_fw_request(av7110, &tag, 0, fwstc, 4);
-	if (ret) {
-		printk(KERN_ERR "%s: av7110_fw_request error\n", __func__);
-		return ret;
-	}
-	dprintk(2, "fwstc = %04hx %04hx %04hx %04hx\n",
-		fwstc[0], fwstc[1], fwstc[2], fwstc[3]);
-
-	*stc =	(((uint64_t) ((fwstc[3] & 0x8000) >> 15)) << 32) |
-		(((uint64_t)  fwstc[1]) << 16) | ((uint64_t) fwstc[0]);
-	*base = 1;
-
-	dprintk(4, "stc = %lu\n", (unsigned long)*stc);
-
-	return 0;
-}
-
-
-/******************************************************************************
- * SEC device file operations
- ******************************************************************************/
-
-
-static int av7110_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
-{
-	struct av7110* av7110 = fe->dvb->priv;
-
-	switch (tone) {
-	case SEC_TONE_ON:
-		return Set22K(av7110, 1);
-
-	case SEC_TONE_OFF:
-		return Set22K(av7110, 0);
-
-	default:
-		return -EINVAL;
-	}
-}
-
-static int av7110_diseqc_send_master_cmd(struct dvb_frontend* fe,
-					 struct dvb_diseqc_master_cmd* cmd)
-{
-	struct av7110* av7110 = fe->dvb->priv;
-
-	return av7110_diseqc_send(av7110, cmd->msg_len, cmd->msg, -1);
-}
-
-static int av7110_diseqc_send_burst(struct dvb_frontend* fe,
-				    fe_sec_mini_cmd_t minicmd)
-{
-	struct av7110* av7110 = fe->dvb->priv;
-
-	return av7110_diseqc_send(av7110, 0, NULL, minicmd);
-}
-
-/* simplified code from budget-core.c */
-static int stop_ts_capture(struct av7110 *budget)
-{
-	dprintk(2, "budget: %p\n", budget);
-
-	if (--budget->feeding1)
-		return budget->feeding1;
-	saa7146_write(budget->dev, MC1, MASK_20);	/* DMA3 off */
-	SAA7146_IER_DISABLE(budget->dev, MASK_10);
-	SAA7146_ISR_CLEAR(budget->dev, MASK_10);
-	return 0;
-}
-
-static int start_ts_capture(struct av7110 *budget)
-{
-	dprintk(2, "budget: %p\n", budget);
-
-	if (budget->feeding1)
-		return ++budget->feeding1;
-	memset(budget->grabbing, 0x00, TS_BUFLEN);
-	budget->ttbp = 0;
-	SAA7146_ISR_CLEAR(budget->dev, MASK_10);  /* VPE */
-	SAA7146_IER_ENABLE(budget->dev, MASK_10); /* VPE */
-	saa7146_write(budget->dev, MC1, (MASK_04 | MASK_20)); /* DMA3 on */
-	return ++budget->feeding1;
-}
-
-static int budget_start_feed(struct dvb_demux_feed *feed)
-{
-	struct dvb_demux *demux = feed->demux;
-	struct av7110 *budget = demux->priv;
-	int status;
-
-	dprintk(2, "av7110: %p\n", budget);
-
-	spin_lock(&budget->feedlock1);
-	feed->pusi_seen = 0; /* have a clean section start */
-	status = start_ts_capture(budget);
-	spin_unlock(&budget->feedlock1);
-	return status;
-}
-
-static int budget_stop_feed(struct dvb_demux_feed *feed)
-{
-	struct dvb_demux *demux = feed->demux;
-	struct av7110 *budget = demux->priv;
-	int status;
-
-	dprintk(2, "budget: %p\n", budget);
-
-	spin_lock(&budget->feedlock1);
-	status = stop_ts_capture(budget);
-	spin_unlock(&budget->feedlock1);
-	return status;
-}
-
-static void vpeirq(unsigned long cookie)
-{
-	struct av7110 *budget = (struct av7110 *)cookie;
-	u8 *mem = (u8 *) (budget->grabbing);
-	u32 olddma = budget->ttbp;
-	u32 newdma = saa7146_read(budget->dev, PCI_VDP3);
-	struct dvb_demux *demux = budget->full_ts ? &budget->demux : &budget->demux1;
-
-	/* nearest lower position divisible by 188 */
-	newdma -= newdma % 188;
-
-	if (newdma >= TS_BUFLEN)
-		return;
-
-	budget->ttbp = newdma;
-
-	if (!budget->feeding1 || (newdma == olddma))
-		return;
-
-	/* Ensure streamed PCI data is synced to CPU */
-	pci_dma_sync_sg_for_cpu(budget->dev->pci, budget->pt.slist, budget->pt.nents, PCI_DMA_FROMDEVICE);
-
-#if 0
-	/* track rps1 activity */
-	printk("vpeirq: %02x Event Counter 1 0x%04x\n",
-	       mem[olddma],
-	       saa7146_read(budget->dev, EC1R) & 0x3fff);
-#endif
-
-	if (newdma > olddma)
-		/* no wraparound, dump olddma..newdma */
-		dvb_dmx_swfilter_packets(demux, mem + olddma, (newdma - olddma) / 188);
-	else {
-		/* wraparound, dump olddma..buflen and 0..newdma */
-		dvb_dmx_swfilter_packets(demux, mem + olddma, (TS_BUFLEN - olddma) / 188);
-		dvb_dmx_swfilter_packets(demux, mem, newdma / 188);
-	}
-}
-
-static int av7110_register(struct av7110 *av7110)
-{
-	int ret, i;
-	struct dvb_demux *dvbdemux = &av7110->demux;
-	struct dvb_demux *dvbdemux1 = &av7110->demux1;
-
-	dprintk(4, "%p\n", av7110);
-
-	if (av7110->registered)
-		return -1;
-
-	av7110->registered = 1;
-
-	dvbdemux->priv = (void *) av7110;
-
-	for (i = 0; i < 32; i++)
-		av7110->handle2filter[i] = NULL;
-
-	dvbdemux->filternum = (av7110->full_ts) ? 256 : 32;
-	dvbdemux->feednum = (av7110->full_ts) ? 256 : 32;
-	dvbdemux->start_feed = av7110_start_feed;
-	dvbdemux->stop_feed = av7110_stop_feed;
-	dvbdemux->write_to_decoder = av7110_write_to_decoder;
-	dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING |
-				      DMX_MEMORY_BASED_FILTERING);
-
-	dvb_dmx_init(&av7110->demux);
-	av7110->demux.dmx.get_stc = dvb_get_stc;
-
-	av7110->dmxdev.filternum = (av7110->full_ts) ? 256 : 32;
-	av7110->dmxdev.demux = &dvbdemux->dmx;
-	av7110->dmxdev.capabilities = 0;
-
-	dvb_dmxdev_init(&av7110->dmxdev, &av7110->dvb_adapter);
-
-	av7110->hw_frontend.source = DMX_FRONTEND_0;
-
-	ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &av7110->hw_frontend);
-
-	if (ret < 0)
-		return ret;
-
-	av7110->mem_frontend.source = DMX_MEMORY_FE;
-
-	ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &av7110->mem_frontend);
-
-	if (ret < 0)
-		return ret;
-
-	ret = dvbdemux->dmx.connect_frontend(&dvbdemux->dmx,
-					     &av7110->hw_frontend);
-	if (ret < 0)
-		return ret;
-
-	av7110_av_register(av7110);
-	av7110_ca_register(av7110);
-
-#ifdef CONFIG_DVB_AV7110_OSD
-	dvb_register_device(&av7110->dvb_adapter, &av7110->osd_dev,
-			    &dvbdev_osd, av7110, DVB_DEVICE_OSD);
-#endif
-
-	dvb_net_init(&av7110->dvb_adapter, &av7110->dvb_net, &dvbdemux->dmx);
-
-	if (budgetpatch) {
-		/* initialize software demux1 without its own frontend
-		 * demux1 hardware is connected to frontend0 of demux0
-		 */
-		dvbdemux1->priv = (void *) av7110;
-
-		dvbdemux1->filternum = 256;
-		dvbdemux1->feednum = 256;
-		dvbdemux1->start_feed = budget_start_feed;
-		dvbdemux1->stop_feed = budget_stop_feed;
-		dvbdemux1->write_to_decoder = NULL;
-
-		dvbdemux1->dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING |
-					       DMX_MEMORY_BASED_FILTERING);
-
-		dvb_dmx_init(&av7110->demux1);
-
-		av7110->dmxdev1.filternum = 256;
-		av7110->dmxdev1.demux = &dvbdemux1->dmx;
-		av7110->dmxdev1.capabilities = 0;
-
-		dvb_dmxdev_init(&av7110->dmxdev1, &av7110->dvb_adapter);
-
-		dvb_net_init(&av7110->dvb_adapter, &av7110->dvb_net1, &dvbdemux1->dmx);
-		printk("dvb-ttpci: additional demux1 for budget-patch registered\n");
-	}
-	return 0;
-}
-
-
-static void dvb_unregister(struct av7110 *av7110)
-{
-	struct dvb_demux *dvbdemux = &av7110->demux;
-	struct dvb_demux *dvbdemux1 = &av7110->demux1;
-
-	dprintk(4, "%p\n", av7110);
-
-	if (!av7110->registered)
-		return;
-
-	if (budgetpatch) {
-		dvb_net_release(&av7110->dvb_net1);
-		dvbdemux->dmx.close(&dvbdemux1->dmx);
-		dvb_dmxdev_release(&av7110->dmxdev1);
-		dvb_dmx_release(&av7110->demux1);
-	}
-
-	dvb_net_release(&av7110->dvb_net);
-
-	dvbdemux->dmx.close(&dvbdemux->dmx);
-	dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &av7110->hw_frontend);
-	dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &av7110->mem_frontend);
-
-	dvb_dmxdev_release(&av7110->dmxdev);
-	dvb_dmx_release(&av7110->demux);
-
-	if (av7110->fe != NULL) {
-		dvb_unregister_frontend(av7110->fe);
-		dvb_frontend_detach(av7110->fe);
-	}
-	dvb_unregister_device(av7110->osd_dev);
-	av7110_av_unregister(av7110);
-	av7110_ca_unregister(av7110);
-}
-
-
-/****************************************************************************
- * I2C client commands
- ****************************************************************************/
-
-int i2c_writereg(struct av7110 *av7110, u8 id, u8 reg, u8 val)
-{
-	u8 msg[2] = { reg, val };
-	struct i2c_msg msgs;
-
-	msgs.flags = 0;
-	msgs.addr = id / 2;
-	msgs.len = 2;
-	msgs.buf = msg;
-	return i2c_transfer(&av7110->i2c_adap, &msgs, 1);
-}
-
-u8 i2c_readreg(struct av7110 *av7110, u8 id, u8 reg)
-{
-	u8 mm1[] = {0x00};
-	u8 mm2[] = {0x00};
-	struct i2c_msg msgs[2];
-
-	msgs[0].flags = 0;
-	msgs[1].flags = I2C_M_RD;
-	msgs[0].addr = msgs[1].addr = id / 2;
-	mm1[0] = reg;
-	msgs[0].len = 1; msgs[1].len = 1;
-	msgs[0].buf = mm1; msgs[1].buf = mm2;
-	i2c_transfer(&av7110->i2c_adap, msgs, 2);
-
-	return mm2[0];
-}
-
-/****************************************************************************
- * INITIALIZATION
- ****************************************************************************/
-
-
-static int check_firmware(struct av7110* av7110)
-{
-	u32 crc = 0, len = 0;
-	unsigned char *ptr;
-
-	/* check for firmware magic */
-	ptr = av7110->bin_fw;
-	if (ptr[0] != 'A' || ptr[1] != 'V' ||
-	    ptr[2] != 'F' || ptr[3] != 'W') {
-		printk("dvb-ttpci: this is not an av7110 firmware\n");
-		return -EINVAL;
-	}
-	ptr += 4;
-
-	/* check dpram file */
-	crc = get_unaligned_be32(ptr);
-	ptr += 4;
-	len = get_unaligned_be32(ptr);
-	ptr += 4;
-	if (len >= 512) {
-		printk("dvb-ttpci: dpram file is way too big.\n");
-		return -EINVAL;
-	}
-	if (crc != crc32_le(0, ptr, len)) {
-		printk("dvb-ttpci: crc32 of dpram file does not match.\n");
-		return -EINVAL;
-	}
-	av7110->bin_dpram = ptr;
-	av7110->size_dpram = len;
-	ptr += len;
-
-	/* check root file */
-	crc = get_unaligned_be32(ptr);
-	ptr += 4;
-	len = get_unaligned_be32(ptr);
-	ptr += 4;
-
-	if (len <= 200000 || len >= 300000 ||
-	    len > ((av7110->bin_fw + av7110->size_fw) - ptr)) {
-		printk("dvb-ttpci: root file has strange size (%d). aborting.\n", len);
-		return -EINVAL;
-	}
-	if( crc != crc32_le(0, ptr, len)) {
-		printk("dvb-ttpci: crc32 of root file does not match.\n");
-		return -EINVAL;
-	}
-	av7110->bin_root = ptr;
-	av7110->size_root = len;
-	return 0;
-}
-
-static void put_firmware(struct av7110* av7110)
-{
-	vfree(av7110->bin_fw);
-}
-
-static int get_firmware(struct av7110* av7110)
-{
-	int ret;
-	const struct firmware *fw;
-
-	/* request the av7110 firmware, this will block until someone uploads it */
-	ret = request_firmware(&fw, "dvb-ttpci-01.fw", &av7110->dev->pci->dev);
-	if (ret) {
-		if (ret == -ENOENT) {
-			printk(KERN_ERR "dvb-ttpci: could not load firmware,"
-			       " file not found: dvb-ttpci-01.fw\n");
-			printk(KERN_ERR "dvb-ttpci: usually this should be in "
-			       "/usr/lib/hotplug/firmware or /lib/firmware\n");
-			printk(KERN_ERR "dvb-ttpci: and can be downloaded from"
-			       " http://www.linuxtv.org/download/dvb/firmware/\n");
-		} else
-			printk(KERN_ERR "dvb-ttpci: cannot request firmware"
-			       " (error %i)\n", ret);
-		return -EINVAL;
-	}
-
-	if (fw->size <= 200000) {
-		printk("dvb-ttpci: this firmware is way too small.\n");
-		release_firmware(fw);
-		return -EINVAL;
-	}
-
-	/* check if the firmware is available */
-	av7110->bin_fw = vmalloc(fw->size);
-	if (NULL == av7110->bin_fw) {
-		dprintk(1, "out of memory\n");
-		release_firmware(fw);
-		return -ENOMEM;
-	}
-
-	memcpy(av7110->bin_fw, fw->data, fw->size);
-	av7110->size_fw = fw->size;
-	if ((ret = check_firmware(av7110)))
-		vfree(av7110->bin_fw);
-
-	release_firmware(fw);
-	return ret;
-}
-
-static int alps_bsrv2_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct av7110* av7110 = fe->dvb->priv;
-	u8 pwr = 0;
-	u8 buf[4];
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
-	u32 div = (p->frequency + 479500) / 125;
-
-	if (p->frequency > 2000000)
-		pwr = 3;
-	else if (p->frequency > 1800000)
-		pwr = 2;
-	else if (p->frequency > 1600000)
-		pwr = 1;
-	else if (p->frequency > 1200000)
-		pwr = 0;
-	else if (p->frequency >= 1100000)
-		pwr = 1;
-	else
-		pwr = 2;
-
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = div & 0xff;
-	buf[2] = ((div & 0x18000) >> 10) | 0x95;
-	buf[3] = (pwr << 6) | 0x30;
-
-	// NOTE: since we're using a prescaler of 2, we set the
-	// divisor frequency to 62.5kHz and divide by 125 above
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer (&av7110->i2c_adap, &msg, 1) != 1)
-		return -EIO;
-	return 0;
-}
-
-static struct ves1x93_config alps_bsrv2_config = {
-	.demod_address = 0x08,
-	.xin = 90100000UL,
-	.invert_pwm = 0,
-};
-
-static int alps_tdbe2_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct av7110* av7110 = fe->dvb->priv;
-	u32 div;
-	u8 data[4];
-	struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) };
-
-	div = (p->frequency + 35937500 + 31250) / 62500;
-
-	data[0] = (div >> 8) & 0x7f;
-	data[1] = div & 0xff;
-	data[2] = 0x85 | ((div >> 10) & 0x60);
-	data[3] = (p->frequency < 174000000 ? 0x88 : p->frequency < 470000000 ? 0x84 : 0x81);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&av7110->i2c_adap, &msg, 1) != 1)
-		return -EIO;
-	return 0;
-}
-
-static struct ves1820_config alps_tdbe2_config = {
-	.demod_address = 0x09,
-	.xin = 57840000UL,
-	.invert = 1,
-	.selagc = VES1820_SELAGC_SIGNAMPERR,
-};
-
-
-
-
-static int grundig_29504_451_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct av7110* av7110 = fe->dvb->priv;
-	u32 div;
-	u8 data[4];
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
-
-	div = p->frequency / 125;
-	data[0] = (div >> 8) & 0x7f;
-	data[1] = div & 0xff;
-	data[2] = 0x8e;
-	data[3] = 0x00;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&av7110->i2c_adap, &msg, 1) != 1)
-		return -EIO;
-	return 0;
-}
-
-static struct tda8083_config grundig_29504_451_config = {
-	.demod_address = 0x68,
-};
-
-
-
-static int philips_cd1516_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct av7110* av7110 = fe->dvb->priv;
-	u32 div;
-	u32 f = p->frequency;
-	u8 data[4];
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
-
-	div = (f + 36125000 + 31250) / 62500;
-
-	data[0] = (div >> 8) & 0x7f;
-	data[1] = div & 0xff;
-	data[2] = 0x8e;
-	data[3] = (f < 174000000 ? 0xa1 : f < 470000000 ? 0x92 : 0x34);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&av7110->i2c_adap, &msg, 1) != 1)
-		return -EIO;
-	return 0;
-}
-
-static struct ves1820_config philips_cd1516_config = {
-	.demod_address = 0x09,
-	.xin = 57840000UL,
-	.invert = 1,
-	.selagc = VES1820_SELAGC_SIGNAMPERR,
-};
-
-
-
-static int alps_tdlb7_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct av7110* av7110 = fe->dvb->priv;
-	u32 div, pwr;
-	u8 data[4];
-	struct i2c_msg msg = { .addr = 0x60, .flags = 0, .buf = data, .len = sizeof(data) };
-
-	div = (p->frequency + 36200000) / 166666;
-
-	if (p->frequency <= 782000000)
-		pwr = 1;
-	else
-		pwr = 2;
-
-	data[0] = (div >> 8) & 0x7f;
-	data[1] = div & 0xff;
-	data[2] = 0x85;
-	data[3] = pwr << 6;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&av7110->i2c_adap, &msg, 1) != 1)
-		return -EIO;
-	return 0;
-}
-
-static int alps_tdlb7_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
-{
-#if defined(CONFIG_DVB_SP8870) || defined(CONFIG_DVB_SP8870_MODULE)
-	struct av7110* av7110 = fe->dvb->priv;
-
-	return request_firmware(fw, name, &av7110->dev->pci->dev);
-#else
-	return -EINVAL;
-#endif
-}
-
-static struct sp8870_config alps_tdlb7_config = {
-
-	.demod_address = 0x71,
-	.request_firmware = alps_tdlb7_request_firmware,
-};
-
-
-static u8 nexusca_stv0297_inittab[] = {
-	0x80, 0x01,
-	0x80, 0x00,
-	0x81, 0x01,
-	0x81, 0x00,
-	0x00, 0x09,
-	0x01, 0x69,
-	0x03, 0x00,
-	0x04, 0x00,
-	0x07, 0x00,
-	0x08, 0x00,
-	0x20, 0x00,
-	0x21, 0x40,
-	0x22, 0x00,
-	0x23, 0x00,
-	0x24, 0x40,
-	0x25, 0x88,
-	0x30, 0xff,
-	0x31, 0x00,
-	0x32, 0xff,
-	0x33, 0x00,
-	0x34, 0x50,
-	0x35, 0x7f,
-	0x36, 0x00,
-	0x37, 0x20,
-	0x38, 0x00,
-	0x40, 0x1c,
-	0x41, 0xff,
-	0x42, 0x29,
-	0x43, 0x00,
-	0x44, 0xff,
-	0x45, 0x00,
-	0x46, 0x00,
-	0x49, 0x04,
-	0x4a, 0x00,
-	0x4b, 0x7b,
-	0x52, 0x30,
-	0x55, 0xae,
-	0x56, 0x47,
-	0x57, 0xe1,
-	0x58, 0x3a,
-	0x5a, 0x1e,
-	0x5b, 0x34,
-	0x60, 0x00,
-	0x63, 0x00,
-	0x64, 0x00,
-	0x65, 0x00,
-	0x66, 0x00,
-	0x67, 0x00,
-	0x68, 0x00,
-	0x69, 0x00,
-	0x6a, 0x02,
-	0x6b, 0x00,
-	0x70, 0xff,
-	0x71, 0x00,
-	0x72, 0x00,
-	0x73, 0x00,
-	0x74, 0x0c,
-	0x80, 0x00,
-	0x81, 0x00,
-	0x82, 0x00,
-	0x83, 0x00,
-	0x84, 0x04,
-	0x85, 0x80,
-	0x86, 0x24,
-	0x87, 0x78,
-	0x88, 0x10,
-	0x89, 0x00,
-	0x90, 0x01,
-	0x91, 0x01,
-	0xa0, 0x04,
-	0xa1, 0x00,
-	0xa2, 0x00,
-	0xb0, 0x91,
-	0xb1, 0x0b,
-	0xc0, 0x53,
-	0xc1, 0x70,
-	0xc2, 0x12,
-	0xd0, 0x00,
-	0xd1, 0x00,
-	0xd2, 0x00,
-	0xd3, 0x00,
-	0xd4, 0x00,
-	0xd5, 0x00,
-	0xde, 0x00,
-	0xdf, 0x00,
-	0x61, 0x49,
-	0x62, 0x0b,
-	0x53, 0x08,
-	0x59, 0x08,
-	0xff, 0xff,
-};
-
-static int nexusca_stv0297_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct av7110* av7110 = fe->dvb->priv;
-	u32 div;
-	u8 data[4];
-	struct i2c_msg msg = { .addr = 0x63, .flags = 0, .buf = data, .len = sizeof(data) };
-	struct i2c_msg readmsg = { .addr = 0x63, .flags = I2C_M_RD, .buf = data, .len = 1 };
-	int i;
-
-	div = (p->frequency + 36150000 + 31250) / 62500;
-
-	data[0] = (div >> 8) & 0x7f;
-	data[1] = div & 0xff;
-	data[2] = 0xce;
-
-	if (p->frequency < 45000000)
-		return -EINVAL;
-	else if (p->frequency < 137000000)
-		data[3] = 0x01;
-	else if (p->frequency < 403000000)
-		data[3] = 0x02;
-	else if (p->frequency < 860000000)
-		data[3] = 0x04;
-	else
-		return -EINVAL;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&av7110->i2c_adap, &msg, 1) != 1) {
-		printk("nexusca: pll transfer failed!\n");
-		return -EIO;
-	}
-
-	// wait for PLL lock
-	for(i = 0; i < 20; i++) {
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 1);
-		if (i2c_transfer(&av7110->i2c_adap, &readmsg, 1) == 1)
-			if (data[0] & 0x40) break;
-		msleep(10);
-	}
-
-	return 0;
-}
-
-static struct stv0297_config nexusca_stv0297_config = {
-
-	.demod_address = 0x1C,
-	.inittab = nexusca_stv0297_inittab,
-	.invert = 1,
-	.stop_during_read = 1,
-};
-
-
-
-static int grundig_29504_401_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct av7110* av7110 = fe->dvb->priv;
-	u32 div;
-	u8 cfg, cpump, band_select;
-	u8 data[4];
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
-
-	div = (36125000 + p->frequency) / 166666;
-
-	cfg = 0x88;
-
-	if (p->frequency < 175000000)
-		cpump = 2;
-	else if (p->frequency < 390000000)
-		cpump = 1;
-	else if (p->frequency < 470000000)
-		cpump = 2;
-	else if (p->frequency < 750000000)
-		cpump = 1;
-	else
-		cpump = 3;
-
-	if (p->frequency < 175000000)
-		band_select = 0x0e;
-	else if (p->frequency < 470000000)
-		band_select = 0x05;
-	else
-		band_select = 0x03;
-
-	data[0] = (div >> 8) & 0x7f;
-	data[1] = div & 0xff;
-	data[2] = ((div >> 10) & 0x60) | cfg;
-	data[3] = (cpump << 6) | band_select;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer (&av7110->i2c_adap, &msg, 1) != 1) return -EIO;
-	return 0;
-}
-
-static struct l64781_config grundig_29504_401_config = {
-	.demod_address = 0x55,
-};
-
-
-
-static int av7110_fe_lock_fix(struct av7110* av7110, fe_status_t status)
-{
-	int ret = 0;
-	int synced = (status & FE_HAS_LOCK) ? 1 : 0;
-
-	av7110->fe_status = status;
-
-	if (av7110->fe_synced == synced)
-		return 0;
-
-	if (av7110->playing) {
-		av7110->fe_synced = synced;
-		return 0;
-	}
-
-	if (mutex_lock_interruptible(&av7110->pid_mutex))
-		return -ERESTARTSYS;
-
-	if (synced) {
-		ret = SetPIDs(av7110, av7110->pids[DMX_PES_VIDEO],
-			av7110->pids[DMX_PES_AUDIO],
-			av7110->pids[DMX_PES_TELETEXT], 0,
-			av7110->pids[DMX_PES_PCR]);
-		if (!ret)
-			ret = av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, Scan, 0);
-	} else {
-		ret = SetPIDs(av7110, 0, 0, 0, 0, 0);
-		if (!ret) {
-			ret = av7110_fw_cmd(av7110, COMTYPE_PID_FILTER, FlushTSQueue, 0);
-			if (!ret)
-				ret = av7110_wait_msgstate(av7110, GPMQBusy);
-		}
-	}
-
-	if (!ret)
-		av7110->fe_synced = synced;
-
-	mutex_unlock(&av7110->pid_mutex);
-	return ret;
-}
-
-static int av7110_fe_set_frontend(struct dvb_frontend *fe)
-{
-	struct av7110* av7110 = fe->dvb->priv;
-
-	int ret = av7110_fe_lock_fix(av7110, 0);
-	if (!ret)
-		ret = av7110->fe_set_frontend(fe);
-
-	return ret;
-}
-
-static int av7110_fe_init(struct dvb_frontend* fe)
-{
-	struct av7110* av7110 = fe->dvb->priv;
-
-	int ret = av7110_fe_lock_fix(av7110, 0);
-	if (!ret)
-		ret = av7110->fe_init(fe);
-	return ret;
-}
-
-static int av7110_fe_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct av7110* av7110 = fe->dvb->priv;
-
-	/* call the real implementation */
-	int ret = av7110->fe_read_status(fe, status);
-	if (!ret)
-		if (((*status ^ av7110->fe_status) & FE_HAS_LOCK) && (*status & FE_HAS_LOCK))
-			ret = av7110_fe_lock_fix(av7110, *status);
-	return ret;
-}
-
-static int av7110_fe_diseqc_reset_overload(struct dvb_frontend* fe)
-{
-	struct av7110* av7110 = fe->dvb->priv;
-
-	int ret = av7110_fe_lock_fix(av7110, 0);
-	if (!ret)
-		ret = av7110->fe_diseqc_reset_overload(fe);
-	return ret;
-}
-
-static int av7110_fe_diseqc_send_master_cmd(struct dvb_frontend* fe,
-					    struct dvb_diseqc_master_cmd* cmd)
-{
-	struct av7110* av7110 = fe->dvb->priv;
-
-	int ret = av7110_fe_lock_fix(av7110, 0);
-	if (!ret) {
-		av7110->saved_master_cmd = *cmd;
-		ret = av7110->fe_diseqc_send_master_cmd(fe, cmd);
-	}
-	return ret;
-}
-
-static int av7110_fe_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
-{
-	struct av7110* av7110 = fe->dvb->priv;
-
-	int ret = av7110_fe_lock_fix(av7110, 0);
-	if (!ret) {
-		av7110->saved_minicmd = minicmd;
-		ret = av7110->fe_diseqc_send_burst(fe, minicmd);
-	}
-	return ret;
-}
-
-static int av7110_fe_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
-{
-	struct av7110* av7110 = fe->dvb->priv;
-
-	int ret = av7110_fe_lock_fix(av7110, 0);
-	if (!ret) {
-		av7110->saved_tone = tone;
-		ret = av7110->fe_set_tone(fe, tone);
-	}
-	return ret;
-}
-
-static int av7110_fe_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
-{
-	struct av7110* av7110 = fe->dvb->priv;
-
-	int ret = av7110_fe_lock_fix(av7110, 0);
-	if (!ret) {
-		av7110->saved_voltage = voltage;
-		ret = av7110->fe_set_voltage(fe, voltage);
-	}
-	return ret;
-}
-
-static int av7110_fe_dishnetwork_send_legacy_command(struct dvb_frontend* fe, unsigned long cmd)
-{
-	struct av7110* av7110 = fe->dvb->priv;
-
-	int ret = av7110_fe_lock_fix(av7110, 0);
-	if (!ret)
-		ret = av7110->fe_dishnetwork_send_legacy_command(fe, cmd);
-	return ret;
-}
-
-static void dvb_s_recover(struct av7110* av7110)
-{
-	av7110_fe_init(av7110->fe);
-
-	av7110_fe_set_voltage(av7110->fe, av7110->saved_voltage);
-	if (av7110->saved_master_cmd.msg_len) {
-		msleep(20);
-		av7110_fe_diseqc_send_master_cmd(av7110->fe, &av7110->saved_master_cmd);
-	}
-	msleep(20);
-	av7110_fe_diseqc_send_burst(av7110->fe, av7110->saved_minicmd);
-	msleep(20);
-	av7110_fe_set_tone(av7110->fe, av7110->saved_tone);
-
-	av7110_fe_set_frontend(av7110->fe);
-}
-
-static u8 read_pwm(struct av7110* av7110)
-{
-	u8 b = 0xff;
-	u8 pwm;
-	struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
-				 { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };
-
-	if ((i2c_transfer(&av7110->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
-		pwm = 0x48;
-
-	return pwm;
-}
-
-static int frontend_init(struct av7110 *av7110)
-{
-	int ret;
-
-	if (av7110->dev->pci->subsystem_vendor == 0x110a) {
-		switch(av7110->dev->pci->subsystem_device) {
-		case 0x0000: // Fujitsu/Siemens DVB-Cable (ves1820/Philips CD1516(??))
-			av7110->fe = dvb_attach(ves1820_attach, &philips_cd1516_config,
-						    &av7110->i2c_adap, read_pwm(av7110));
-			if (av7110->fe) {
-				av7110->fe->ops.tuner_ops.set_params = philips_cd1516_tuner_set_params;
-			}
-			break;
-		}
-
-	} else if (av7110->dev->pci->subsystem_vendor == 0x13c2) {
-		switch(av7110->dev->pci->subsystem_device) {
-		case 0x0000: // Hauppauge/TT WinTV DVB-S rev1.X
-		case 0x0003: // Hauppauge/TT WinTV Nexus-S Rev 2.X
-		case 0x1002: // Hauppauge/TT WinTV DVB-S rev1.3SE
-
-			// try the ALPS BSRV2 first of all
-			av7110->fe = dvb_attach(ves1x93_attach, &alps_bsrv2_config, &av7110->i2c_adap);
-			if (av7110->fe) {
-				av7110->fe->ops.tuner_ops.set_params = alps_bsrv2_tuner_set_params;
-				av7110->fe->ops.diseqc_send_master_cmd = av7110_diseqc_send_master_cmd;
-				av7110->fe->ops.diseqc_send_burst = av7110_diseqc_send_burst;
-				av7110->fe->ops.set_tone = av7110_set_tone;
-				av7110->recover = dvb_s_recover;
-				break;
-			}
-
-			// try the ALPS BSRU6 now
-			av7110->fe = dvb_attach(stv0299_attach, &alps_bsru6_config, &av7110->i2c_adap);
-			if (av7110->fe) {
-				av7110->fe->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
-				av7110->fe->tuner_priv = &av7110->i2c_adap;
-
-				av7110->fe->ops.diseqc_send_master_cmd = av7110_diseqc_send_master_cmd;
-				av7110->fe->ops.diseqc_send_burst = av7110_diseqc_send_burst;
-				av7110->fe->ops.set_tone = av7110_set_tone;
-				av7110->recover = dvb_s_recover;
-				break;
-			}
-
-			// Try the grundig 29504-451
-			av7110->fe = dvb_attach(tda8083_attach, &grundig_29504_451_config, &av7110->i2c_adap);
-			if (av7110->fe) {
-				av7110->fe->ops.tuner_ops.set_params = grundig_29504_451_tuner_set_params;
-				av7110->fe->ops.diseqc_send_master_cmd = av7110_diseqc_send_master_cmd;
-				av7110->fe->ops.diseqc_send_burst = av7110_diseqc_send_burst;
-				av7110->fe->ops.set_tone = av7110_set_tone;
-				av7110->recover = dvb_s_recover;
-				break;
-			}
-
-			/* Try DVB-C cards */
-			switch(av7110->dev->pci->subsystem_device) {
-			case 0x0000:
-				/* Siemens DVB-C (full-length card) VES1820/Philips CD1516 */
-				av7110->fe = dvb_attach(ves1820_attach, &philips_cd1516_config, &av7110->i2c_adap,
-							read_pwm(av7110));
-				if (av7110->fe) {
-					av7110->fe->ops.tuner_ops.set_params = philips_cd1516_tuner_set_params;
-				}
-				break;
-			case 0x0003:
-				/* Hauppauge DVB-C 2.1 VES1820/ALPS TDBE2 */
-				av7110->fe = dvb_attach(ves1820_attach, &alps_tdbe2_config, &av7110->i2c_adap,
-							read_pwm(av7110));
-				if (av7110->fe) {
-					av7110->fe->ops.tuner_ops.set_params = alps_tdbe2_tuner_set_params;
-				}
-				break;
-			}
-			break;
-
-		case 0x0001: // Hauppauge/TT Nexus-T premium rev1.X
-			// try ALPS TDLB7 first, then Grundig 29504-401
-			av7110->fe = dvb_attach(sp8870_attach, &alps_tdlb7_config, &av7110->i2c_adap);
-			if (av7110->fe) {
-				av7110->fe->ops.tuner_ops.set_params = alps_tdlb7_tuner_set_params;
-				break;
-			}
-			/* fall-thru */
-
-		case 0x0008: // Hauppauge/TT DVB-T
-			// Grundig 29504-401
-			av7110->fe = dvb_attach(l64781_attach, &grundig_29504_401_config, &av7110->i2c_adap);
-			if (av7110->fe)
-				av7110->fe->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params;
-			break;
-
-		case 0x0002: // Hauppauge/TT DVB-C premium rev2.X
-
-			av7110->fe = dvb_attach(ves1820_attach, &alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110));
-			if (av7110->fe) {
-				av7110->fe->ops.tuner_ops.set_params = alps_tdbe2_tuner_set_params;
-			}
-			break;
-
-		case 0x0004: // Galaxis DVB-S rev1.3
-			/* ALPS BSRV2 */
-			av7110->fe = dvb_attach(ves1x93_attach, &alps_bsrv2_config, &av7110->i2c_adap);
-			if (av7110->fe) {
-				av7110->fe->ops.tuner_ops.set_params = alps_bsrv2_tuner_set_params;
-				av7110->fe->ops.diseqc_send_master_cmd = av7110_diseqc_send_master_cmd;
-				av7110->fe->ops.diseqc_send_burst = av7110_diseqc_send_burst;
-				av7110->fe->ops.set_tone = av7110_set_tone;
-				av7110->recover = dvb_s_recover;
-			}
-			break;
-
-		case 0x0006: /* Fujitsu-Siemens DVB-S rev 1.6 */
-			/* Grundig 29504-451 */
-			av7110->fe = dvb_attach(tda8083_attach, &grundig_29504_451_config, &av7110->i2c_adap);
-			if (av7110->fe) {
-				av7110->fe->ops.tuner_ops.set_params = grundig_29504_451_tuner_set_params;
-				av7110->fe->ops.diseqc_send_master_cmd = av7110_diseqc_send_master_cmd;
-				av7110->fe->ops.diseqc_send_burst = av7110_diseqc_send_burst;
-				av7110->fe->ops.set_tone = av7110_set_tone;
-				av7110->recover = dvb_s_recover;
-			}
-			break;
-
-		case 0x000A: // Hauppauge/TT Nexus-CA rev1.X
-
-			av7110->fe = dvb_attach(stv0297_attach, &nexusca_stv0297_config, &av7110->i2c_adap);
-			if (av7110->fe) {
-				av7110->fe->ops.tuner_ops.set_params = nexusca_stv0297_tuner_set_params;
-
-				/* set TDA9819 into DVB mode */
-				saa7146_setgpio(av7110->dev, 1, SAA7146_GPIO_OUTLO); // TDA9819 pin9(STD)
-				saa7146_setgpio(av7110->dev, 3, SAA7146_GPIO_OUTLO); // TDA9819 pin30(VIF)
-
-				/* tuner on this needs a slower i2c bus speed */
-				av7110->dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
-				break;
-			}
-			break;
-
-		case 0x000E: /* Hauppauge/TT Nexus-S rev 2.3 */
-			/* ALPS BSBE1 */
-			av7110->fe = dvb_attach(stv0299_attach, &alps_bsbe1_config, &av7110->i2c_adap);
-			if (av7110->fe) {
-				av7110->fe->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params;
-				av7110->fe->tuner_priv = &av7110->i2c_adap;
-
-				if (dvb_attach(lnbp21_attach, av7110->fe, &av7110->i2c_adap, 0, 0) == NULL) {
-					printk("dvb-ttpci: LNBP21 not found!\n");
-					if (av7110->fe->ops.release)
-						av7110->fe->ops.release(av7110->fe);
-					av7110->fe = NULL;
-				} else {
-					av7110->fe->ops.dishnetwork_send_legacy_command = NULL;
-					av7110->recover = dvb_s_recover;
-				}
-			}
-			break;
-		}
-	}
-
-	if (!av7110->fe) {
-		/* FIXME: propagate the failure code from the lower layers */
-		ret = -ENOMEM;
-		printk("dvb-ttpci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
-		       av7110->dev->pci->vendor,
-		       av7110->dev->pci->device,
-		       av7110->dev->pci->subsystem_vendor,
-		       av7110->dev->pci->subsystem_device);
-	} else {
-		FE_FUNC_OVERRIDE(av7110->fe->ops.init, av7110->fe_init, av7110_fe_init);
-		FE_FUNC_OVERRIDE(av7110->fe->ops.read_status, av7110->fe_read_status, av7110_fe_read_status);
-		FE_FUNC_OVERRIDE(av7110->fe->ops.diseqc_reset_overload, av7110->fe_diseqc_reset_overload, av7110_fe_diseqc_reset_overload);
-		FE_FUNC_OVERRIDE(av7110->fe->ops.diseqc_send_master_cmd, av7110->fe_diseqc_send_master_cmd, av7110_fe_diseqc_send_master_cmd);
-		FE_FUNC_OVERRIDE(av7110->fe->ops.diseqc_send_burst, av7110->fe_diseqc_send_burst, av7110_fe_diseqc_send_burst);
-		FE_FUNC_OVERRIDE(av7110->fe->ops.set_tone, av7110->fe_set_tone, av7110_fe_set_tone);
-		FE_FUNC_OVERRIDE(av7110->fe->ops.set_voltage, av7110->fe_set_voltage, av7110_fe_set_voltage);
-		FE_FUNC_OVERRIDE(av7110->fe->ops.dishnetwork_send_legacy_command, av7110->fe_dishnetwork_send_legacy_command, av7110_fe_dishnetwork_send_legacy_command);
-		FE_FUNC_OVERRIDE(av7110->fe->ops.set_frontend, av7110->fe_set_frontend, av7110_fe_set_frontend);
-
-		ret = dvb_register_frontend(&av7110->dvb_adapter, av7110->fe);
-		if (ret < 0) {
-			printk("av7110: Frontend registration failed!\n");
-			dvb_frontend_detach(av7110->fe);
-			av7110->fe = NULL;
-		}
-	}
-	return ret;
-}
-
-/* Budgetpatch note:
- * Original hardware design by Roberto Deza:
- * There is a DVB_Wiki at
- * http://www.linuxtv.org/
- *
- * New software triggering design by Emard that works on
- * original Roberto Deza's hardware:
- *
- * rps1 code for budgetpatch will copy internal HS event to GPIO3 pin.
- * GPIO3 is in budget-patch hardware connectd to port B VSYNC
- * HS is an internal event of 7146, accessible with RPS
- * and temporarily raised high every n lines
- * (n in defined in the RPS_THRESH1 counter threshold)
- * I think HS is raised high on the beginning of the n-th line
- * and remains high until this n-th line that triggered
- * it is completely received. When the receiption of n-th line
- * ends, HS is lowered.
- *
- * To transmit data over DMA, 7146 needs changing state at
- * port B VSYNC pin. Any changing of port B VSYNC will
- * cause some DMA data transfer, with more or less packets loss.
- * It depends on the phase and frequency of VSYNC and
- * the way of 7146 is instructed to trigger on port B (defined
- * in DD1_INIT register, 3rd nibble from the right valid
- * numbers are 0-7, see datasheet)
- *
- * The correct triggering can minimize packet loss,
- * dvbtraffic should give this stable bandwidths:
- *   22k transponder = 33814 kbit/s
- * 27.5k transponder = 38045 kbit/s
- * by experiment it is found that the best results
- * (stable bandwidths and almost no packet loss)
- * are obtained using DD1_INIT triggering number 2
- * (Va at rising edge of VS Fa = HS x VS-failing forced toggle)
- * and a VSYNC phase that occurs in the middle of DMA transfer
- * (about byte 188*512=96256 in the DMA window).
- *
- * Phase of HS is still not clear to me how to control,
- * It just happens to be so. It can be seen if one enables
- * RPS_IRQ and print Event Counter 1 in vpeirq(). Every
- * time RPS_INTERRUPT is called, the Event Counter 1 will
- * increment. That's how the 7146 is programmed to do event
- * counting in this budget-patch.c
- * I *think* HPS setting has something to do with the phase
- * of HS but I can't be 100% sure in that.
- *
- * hardware debug note: a working budget card (including budget patch)
- * with vpeirq() interrupt setup in mode "0x90" (every 64K) will
- * generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes
- * and that means 3*25=75 Hz of interrupt freqency, as seen by
- * watch cat /proc/interrupts
- *
- * If this frequency is 3x lower (and data received in the DMA
- * buffer don't start with 0x47, but in the middle of packets,
- * whose lengths appear to be like 188 292 188 104 etc.
- * this means VSYNC line is not connected in the hardware.
- * (check soldering pcb and pins)
- * The same behaviour of missing VSYNC can be duplicated on budget
- * cards, by seting DD1_INIT trigger mode 7 in 3rd nibble.
- */
-static int __devinit av7110_attach(struct saa7146_dev* dev,
-				   struct saa7146_pci_extension_data *pci_ext)
-{
-	const int length = TS_WIDTH * TS_HEIGHT;
-	struct pci_dev *pdev = dev->pci;
-	struct av7110 *av7110;
-	struct task_struct *thread;
-	int ret, count = 0;
-
-	dprintk(4, "dev: %p\n", dev);
-
-	/* Set RPS_IRQ to 1 to track rps1 activity.
-	 * Enabling this won't send any interrupt to PC CPU.
-	 */
-#define RPS_IRQ 0
-
-	if (budgetpatch == 1) {
-		budgetpatch = 0;
-		/* autodetect the presence of budget patch
-		 * this only works if saa7146 has been recently
-		 * reset with with MASK_31 to MC1
-		 *
-		 * will wait for VBI_B event (vertical blank at port B)
-		 * and will reset GPIO3 after VBI_B is detected.
-		 * (GPIO3 should be raised high by CPU to
-		 * test if GPIO3 will generate vertical blank signal
-		 * in budget patch GPIO3 is connected to VSYNC_B
-		 */
-
-		/* RESET SAA7146 */
-		saa7146_write(dev, MC1, MASK_31);
-		/* autodetection success seems to be time-dependend after reset */
-
-		/* Fix VSYNC level */
-		saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
-		/* set vsync_b triggering */
-		saa7146_write(dev, DD1_STREAM_B, 0);
-		/* port B VSYNC at rising edge */
-		saa7146_write(dev, DD1_INIT, 0x00000200);
-		saa7146_write(dev, BRS_CTRL, 0x00000000);  // VBI
-		saa7146_write(dev, MC2,
-			      1 * (MASK_08 | MASK_24)  |   // BRS control
-			      0 * (MASK_09 | MASK_25)  |   // a
-			      1 * (MASK_10 | MASK_26)  |   // b
-			      0 * (MASK_06 | MASK_22)  |   // HPS_CTRL1
-			      0 * (MASK_05 | MASK_21)  |   // HPS_CTRL2
-			      0 * (MASK_01 | MASK_15)      // DEBI
-		);
-
-		/* start writing RPS1 code from beginning */
-		count = 0;
-		/* Disable RPS1 */
-		saa7146_write(dev, MC1, MASK_29);
-		/* RPS1 timeout disable */
-		saa7146_write(dev, RPS_TOV1, 0);
-		WRITE_RPS1(CMD_PAUSE | EVT_VBI_B);
-		WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
-		WRITE_RPS1(GPIO3_MSK);
-		WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
-#if RPS_IRQ
-		/* issue RPS1 interrupt to increment counter */
-		WRITE_RPS1(CMD_INTERRUPT);
-#endif
-		WRITE_RPS1(CMD_STOP);
-		/* Jump to begin of RPS program as safety measure               (p37) */
-		WRITE_RPS1(CMD_JUMP);
-		WRITE_RPS1(dev->d_rps1.dma_handle);
-
-#if RPS_IRQ
-		/* set event counter 1 source as RPS1 interrupt (0x03)          (rE4 p53)
-		 * use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled
-		 * use 0x15 to track VPE  interrupts - increase by 1 every vpeirq() is called
-		 */
-		saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
-		/* set event counter 1 threshold to maximum allowed value        (rEC p55) */
-		saa7146_write(dev, ECT1R,  0x3fff );
-#endif
-		/* Set RPS1 Address register to point to RPS code               (r108 p42) */
-		saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
-		/* Enable RPS1,                                                 (rFC p33) */
-		saa7146_write(dev, MC1, (MASK_13 | MASK_29 ));
-
-		mdelay(10);
-		/* now send VSYNC_B to rps1 by rising GPIO3 */
-		saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
-		mdelay(10);
-		/* if rps1 responded by lowering the GPIO3,
-		 * then we have budgetpatch hardware
-		 */
-		if ((saa7146_read(dev, GPIO_CTRL) & 0x10000000) == 0) {
-			budgetpatch = 1;
-			printk("dvb-ttpci: BUDGET-PATCH DETECTED.\n");
-		}
-		/* Disable RPS1 */
-		saa7146_write(dev, MC1, ( MASK_29 ));
-#if RPS_IRQ
-		printk("dvb-ttpci: Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff );
-#endif
-	}
-
-	/* prepare the av7110 device struct */
-	av7110 = kzalloc(sizeof(struct av7110), GFP_KERNEL);
-	if (!av7110) {
-		dprintk(1, "out of memory\n");
-		return -ENOMEM;
-	}
-
-	av7110->card_name = (char*) pci_ext->ext_priv;
-	av7110->dev = dev;
-	dev->ext_priv = av7110;
-
-	ret = get_firmware(av7110);
-	if (ret < 0)
-		goto err_kfree_0;
-
-	ret = dvb_register_adapter(&av7110->dvb_adapter, av7110->card_name,
-				   THIS_MODULE, &dev->pci->dev, adapter_nr);
-	if (ret < 0)
-		goto err_put_firmware_1;
-
-	/* the Siemens DVB needs this if you want to have the i2c chips
-	   get recognized before the main driver is fully loaded */
-	saa7146_write(dev, GPIO_CTRL, 0x500000);
-
-	strlcpy(av7110->i2c_adap.name, pci_ext->ext_priv, sizeof(av7110->i2c_adap.name));
-
-	saa7146_i2c_adapter_prepare(dev, &av7110->i2c_adap, SAA7146_I2C_BUS_BIT_RATE_120); /* 275 kHz */
-
-	ret = i2c_add_adapter(&av7110->i2c_adap);
-	if (ret < 0)
-		goto err_dvb_unregister_adapter_2;
-
-	ttpci_eeprom_parse_mac(&av7110->i2c_adap,
-			       av7110->dvb_adapter.proposed_mac);
-	ret = -ENOMEM;
-
-	/* full-ts mod? */
-	if (full_ts)
-		av7110->full_ts = true;
-
-	/* check for full-ts flag in eeprom */
-	if (i2c_readreg(av7110, 0xaa, 0) == 0x4f && i2c_readreg(av7110, 0xaa, 1) == 0x45) {
-		u8 flags = i2c_readreg(av7110, 0xaa, 2);
-		if (flags != 0xff && (flags & 0x01))
-			av7110->full_ts = true;
-	}
-
-	if (av7110->full_ts) {
-		printk(KERN_INFO "dvb-ttpci: full-ts mode enabled for saa7146 port B\n");
-		spin_lock_init(&av7110->feedlock1);
-		av7110->grabbing = saa7146_vmalloc_build_pgtable(pdev, length,
-								 &av7110->pt);
-		if (!av7110->grabbing)
-			goto err_i2c_del_3;
-
-		saa7146_write(dev, DD1_STREAM_B, 0x00000000);
-		saa7146_write(dev, MC2, (MASK_10 | MASK_26));
-
-		saa7146_write(dev, DD1_INIT, 0x00000600);
-		saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
-
-		saa7146_write(dev, BRS_CTRL, 0x60000000);
-		saa7146_write(dev, MC2, MASK_08 | MASK_24);
-
-		/* dma3 */
-		saa7146_write(dev, PCI_BT_V1, 0x001c0000 | (saa7146_read(dev, PCI_BT_V1) & ~0x001f0000));
-		saa7146_write(dev, BASE_ODD3, 0);
-		saa7146_write(dev, BASE_EVEN3, 0);
-		saa7146_write(dev, PROT_ADDR3, TS_WIDTH * TS_HEIGHT);
-		saa7146_write(dev, PITCH3, TS_WIDTH);
-		saa7146_write(dev, BASE_PAGE3, av7110->pt.dma | ME1 | 0x90);
-		saa7146_write(dev, NUM_LINE_BYTE3, (TS_HEIGHT << 16) | TS_WIDTH);
-		saa7146_write(dev, MC2, MASK_04 | MASK_20);
-
-		tasklet_init(&av7110->vpe_tasklet, vpeirq, (unsigned long) av7110);
-
-	} else if (budgetpatch) {
-		spin_lock_init(&av7110->feedlock1);
-		av7110->grabbing = saa7146_vmalloc_build_pgtable(pdev, length,
-								 &av7110->pt);
-		if (!av7110->grabbing)
-			goto err_i2c_del_3;
-
-		saa7146_write(dev, PCI_BT_V1, 0x1c1f101f);
-		saa7146_write(dev, BCS_CTRL, 0x80400040);
-		/* set dd1 stream a & b */
-		saa7146_write(dev, DD1_STREAM_B, 0x00000000);
-		saa7146_write(dev, DD1_INIT, 0x03000200);
-		saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
-		saa7146_write(dev, BRS_CTRL, 0x60000000);
-		saa7146_write(dev, BASE_ODD3, 0);
-		saa7146_write(dev, BASE_EVEN3, 0);
-		saa7146_write(dev, PROT_ADDR3, TS_WIDTH * TS_HEIGHT);
-		saa7146_write(dev, BASE_PAGE3, av7110->pt.dma | ME1 | 0x90);
-
-		saa7146_write(dev, PITCH3, TS_WIDTH);
-		saa7146_write(dev, NUM_LINE_BYTE3, (TS_HEIGHT << 16) | TS_WIDTH);
-
-		/* upload all */
-		saa7146_write(dev, MC2, 0x077c077c);
-		saa7146_write(dev, GPIO_CTRL, 0x000000);
-#if RPS_IRQ
-		/* set event counter 1 source as RPS1 interrupt (0x03)          (rE4 p53)
-		 * use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled
-		 * use 0x15 to track VPE  interrupts - increase by 1 every vpeirq() is called
-		 */
-		saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
-		/* set event counter 1 threshold to maximum allowed value        (rEC p55) */
-		saa7146_write(dev, ECT1R,  0x3fff );
-#endif
-		/* Setup BUDGETPATCH MAIN RPS1 "program" (p35) */
-		count = 0;
-
-		/* Wait Source Line Counter Threshold                           (p36) */
-		WRITE_RPS1(CMD_PAUSE | EVT_HS);
-		/* Set GPIO3=1                                                  (p42) */
-		WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
-		WRITE_RPS1(GPIO3_MSK);
-		WRITE_RPS1(SAA7146_GPIO_OUTHI<<24);
-#if RPS_IRQ
-		/* issue RPS1 interrupt */
-		WRITE_RPS1(CMD_INTERRUPT);
-#endif
-		/* Wait reset Source Line Counter Threshold                     (p36) */
-		WRITE_RPS1(CMD_PAUSE | RPS_INV | EVT_HS);
-		/* Set GPIO3=0                                                  (p42) */
-		WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
-		WRITE_RPS1(GPIO3_MSK);
-		WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
-#if RPS_IRQ
-		/* issue RPS1 interrupt */
-		WRITE_RPS1(CMD_INTERRUPT);
-#endif
-		/* Jump to begin of RPS program                                 (p37) */
-		WRITE_RPS1(CMD_JUMP);
-		WRITE_RPS1(dev->d_rps1.dma_handle);
-
-		/* Fix VSYNC level */
-		saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
-		/* Set RPS1 Address register to point to RPS code               (r108 p42) */
-		saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
-		/* Set Source Line Counter Threshold, using BRS                 (rCC p43)
-		 * It generates HS event every TS_HEIGHT lines
-		 * this is related to TS_WIDTH set in register
-		 * NUM_LINE_BYTE3. If NUM_LINE_BYTE low 16 bits
-		 * are set to TS_WIDTH bytes (TS_WIDTH=2*188),
-		 * then RPS_THRESH1 should be set to trigger
-		 * every TS_HEIGHT (512) lines.
-		 */
-		saa7146_write(dev, RPS_THRESH1, (TS_HEIGHT*1) | MASK_12 );
-
-		/* Enable RPS1                                                  (rFC p33) */
-		saa7146_write(dev, MC1, (MASK_13 | MASK_29));
-
-		/* end of budgetpatch register initialization */
-		tasklet_init (&av7110->vpe_tasklet,  vpeirq,  (unsigned long) av7110);
-	} else {
-		saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
-		saa7146_write(dev, BCS_CTRL, 0x80400040);
-
-		/* set dd1 stream a & b */
-		saa7146_write(dev, DD1_STREAM_B, 0x00000000);
-		saa7146_write(dev, DD1_INIT, 0x03000000);
-		saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
-
-		/* upload all */
-		saa7146_write(dev, MC2, 0x077c077c);
-		saa7146_write(dev, GPIO_CTRL, 0x000000);
-	}
-
-	tasklet_init (&av7110->debi_tasklet, debiirq, (unsigned long) av7110);
-	tasklet_init (&av7110->gpio_tasklet, gpioirq, (unsigned long) av7110);
-
-	mutex_init(&av7110->pid_mutex);
-
-	/* locks for data transfers from/to AV7110 */
-	spin_lock_init(&av7110->debilock);
-	mutex_init(&av7110->dcomlock);
-	av7110->debitype = -1;
-
-	/* default OSD window */
-	av7110->osdwin = 1;
-	mutex_init(&av7110->osd_mutex);
-
-	/* TV standard */
-	av7110->vidmode = tv_standard == 1 ? AV7110_VIDEO_MODE_NTSC
-					   : AV7110_VIDEO_MODE_PAL;
-
-	/* ARM "watchdog" */
-	init_waitqueue_head(&av7110->arm_wait);
-	av7110->arm_thread = NULL;
-
-	/* allocate and init buffers */
-	av7110->debi_virt = pci_alloc_consistent(pdev, 8192, &av7110->debi_bus);
-	if (!av7110->debi_virt)
-		goto err_saa71466_vfree_4;
-
-
-	av7110->iobuf = vmalloc(AVOUTLEN+AOUTLEN+BMPLEN+4*IPACKS);
-	if (!av7110->iobuf)
-		goto err_pci_free_5;
-
-	ret = av7110_av_init(av7110);
-	if (ret < 0)
-		goto err_iobuf_vfree_6;
-
-	/* init BMP buffer */
-	av7110->bmpbuf = av7110->iobuf+AVOUTLEN+AOUTLEN;
-	init_waitqueue_head(&av7110->bmpq);
-
-	ret = av7110_ca_init(av7110);
-	if (ret < 0)
-		goto err_av7110_av_exit_7;
-
-	/* load firmware into AV7110 cards */
-	ret = av7110_bootarm(av7110);
-	if (ret < 0)
-		goto err_av7110_ca_exit_8;
-
-	ret = av7110_firmversion(av7110);
-	if (ret < 0)
-		goto err_stop_arm_9;
-
-	if (FW_VERSION(av7110->arm_app)<0x2501)
-		printk ("dvb-ttpci: Warning, firmware version 0x%04x is too old. "
-			"System might be unstable!\n", FW_VERSION(av7110->arm_app));
-
-	thread = kthread_run(arm_thread, (void *) av7110, "arm_mon");
-	if (IS_ERR(thread)) {
-		ret = PTR_ERR(thread);
-		goto err_stop_arm_9;
-	}
-	av7110->arm_thread = thread;
-
-	/* set initial volume in mixer struct */
-	av7110->mixer.volume_left  = volume;
-	av7110->mixer.volume_right = volume;
-
-	ret = av7110_register(av7110);
-	if (ret < 0)
-		goto err_arm_thread_stop_10;
-
-	init_av7110_av(av7110);
-
-	/* special case DVB-C: these cards have an analog tuner
-	   plus need some special handling, so we have separate
-	   saa7146_ext_vv data for these... */
-	ret = av7110_init_v4l(av7110);
-	if (ret < 0)
-		goto err_av7110_unregister_11;
-
-	av7110->dvb_adapter.priv = av7110;
-	ret = frontend_init(av7110);
-	if (ret < 0)
-		goto err_av7110_exit_v4l_12;
-
-#if defined(CONFIG_INPUT_EVDEV) || defined(CONFIG_INPUT_EVDEV_MODULE)
-	av7110_ir_init(av7110);
-#endif
-	printk(KERN_INFO "dvb-ttpci: found av7110-%d.\n", av7110_num);
-	av7110_num++;
-out:
-	return ret;
-
-err_av7110_exit_v4l_12:
-	av7110_exit_v4l(av7110);
-err_av7110_unregister_11:
-	dvb_unregister(av7110);
-err_arm_thread_stop_10:
-	av7110_arm_sync(av7110);
-err_stop_arm_9:
-	/* Nothing to do. Rejoice. */
-err_av7110_ca_exit_8:
-	av7110_ca_exit(av7110);
-err_av7110_av_exit_7:
-	av7110_av_exit(av7110);
-err_iobuf_vfree_6:
-	vfree(av7110->iobuf);
-err_pci_free_5:
-	pci_free_consistent(pdev, 8192, av7110->debi_virt, av7110->debi_bus);
-err_saa71466_vfree_4:
-	if (av7110->grabbing)
-		saa7146_vfree_destroy_pgtable(pdev, av7110->grabbing, &av7110->pt);
-err_i2c_del_3:
-	i2c_del_adapter(&av7110->i2c_adap);
-err_dvb_unregister_adapter_2:
-	dvb_unregister_adapter(&av7110->dvb_adapter);
-err_put_firmware_1:
-	put_firmware(av7110);
-err_kfree_0:
-	kfree(av7110);
-	goto out;
-}
-
-static int __devexit av7110_detach(struct saa7146_dev* saa)
-{
-	struct av7110 *av7110 = saa->ext_priv;
-	dprintk(4, "%p\n", av7110);
-
-#if defined(CONFIG_INPUT_EVDEV) || defined(CONFIG_INPUT_EVDEV_MODULE)
-	av7110_ir_exit(av7110);
-#endif
-	if (budgetpatch || av7110->full_ts) {
-		if (budgetpatch) {
-			/* Disable RPS1 */
-			saa7146_write(saa, MC1, MASK_29);
-			/* VSYNC LOW (inactive) */
-			saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
-		}
-		saa7146_write(saa, MC1, MASK_20);	/* DMA3 off */
-		SAA7146_IER_DISABLE(saa, MASK_10);
-		SAA7146_ISR_CLEAR(saa, MASK_10);
-		msleep(50);
-		tasklet_kill(&av7110->vpe_tasklet);
-		saa7146_vfree_destroy_pgtable(saa->pci, av7110->grabbing, &av7110->pt);
-	}
-	av7110_exit_v4l(av7110);
-
-	av7110_arm_sync(av7110);
-
-	tasklet_kill(&av7110->debi_tasklet);
-	tasklet_kill(&av7110->gpio_tasklet);
-
-	dvb_unregister(av7110);
-
-	SAA7146_IER_DISABLE(saa, MASK_19 | MASK_03);
-	SAA7146_ISR_CLEAR(saa, MASK_19 | MASK_03);
-
-	av7110_ca_exit(av7110);
-	av7110_av_exit(av7110);
-
-	vfree(av7110->iobuf);
-	pci_free_consistent(saa->pci, 8192, av7110->debi_virt,
-			    av7110->debi_bus);
-
-	i2c_del_adapter(&av7110->i2c_adap);
-
-	dvb_unregister_adapter (&av7110->dvb_adapter);
-
-	av7110_num--;
-
-	put_firmware(av7110);
-
-	kfree(av7110);
-
-	saa->ext_priv = NULL;
-
-	return 0;
-}
-
-
-static void av7110_irq(struct saa7146_dev* dev, u32 *isr)
-{
-	struct av7110 *av7110 = dev->ext_priv;
-
-	//print_time("av7110_irq");
-
-	/* Note: Don't try to handle the DEBI error irq (MASK_18), in
-	 * intel mode the timeout is asserted all the time...
-	 */
-
-	if (*isr & MASK_19) {
-		//printk("av7110_irq: DEBI\n");
-		/* Note 1: The DEBI irq is level triggered: We must enable it
-		 * only after we started a DMA xfer, and disable it here
-		 * immediately, or it will be signalled all the time while
-		 * DEBI is idle.
-		 * Note 2: You would think that an irq which is masked is
-		 * not signalled by the hardware. Not so for the SAA7146:
-		 * An irq is signalled as long as the corresponding bit
-		 * in the ISR is set, and disabling irqs just prevents the
-		 * hardware from setting the ISR bit. This means a) that we
-		 * must clear the ISR *after* disabling the irq (which is why
-		 * we must do it here even though saa7146_core did it already),
-		 * and b) that if we were to disable an edge triggered irq
-		 * (like the gpio irqs sadly are) temporarily we would likely
-		 * loose some. This sucks :-(
-		 */
-		SAA7146_IER_DISABLE(av7110->dev, MASK_19);
-		SAA7146_ISR_CLEAR(av7110->dev, MASK_19);
-		tasklet_schedule(&av7110->debi_tasklet);
-	}
-
-	if (*isr & MASK_03) {
-		//printk("av7110_irq: GPIO\n");
-		tasklet_schedule(&av7110->gpio_tasklet);
-	}
-
-	if (*isr & MASK_10)
-		tasklet_schedule(&av7110->vpe_tasklet);
-}
-
-
-static struct saa7146_extension av7110_extension_driver;
-
-#define MAKE_AV7110_INFO(x_var,x_name) \
-static struct saa7146_pci_extension_data x_var = { \
-	.ext_priv = x_name, \
-	.ext = &av7110_extension_driver }
-
-MAKE_AV7110_INFO(tts_1_X_fsc,"Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu Siemens DVB-C");
-MAKE_AV7110_INFO(ttt_1_X,    "Technotrend/Hauppauge WinTV DVB-T rev1.X");
-MAKE_AV7110_INFO(ttc_1_X,    "Technotrend/Hauppauge WinTV Nexus-CA rev1.X");
-MAKE_AV7110_INFO(ttc_2_X,    "Technotrend/Hauppauge WinTV DVB-C rev2.X");
-MAKE_AV7110_INFO(tts_2_X,    "Technotrend/Hauppauge WinTV Nexus-S rev2.X");
-MAKE_AV7110_INFO(tts_2_3,    "Technotrend/Hauppauge WinTV Nexus-S rev2.3");
-MAKE_AV7110_INFO(tts_1_3se,  "Technotrend/Hauppauge WinTV DVB-S rev1.3 SE");
-MAKE_AV7110_INFO(ttt,        "Technotrend/Hauppauge DVB-T");
-MAKE_AV7110_INFO(fsc,        "Fujitsu Siemens DVB-C");
-MAKE_AV7110_INFO(fss,        "Fujitsu Siemens DVB-S rev1.6");
-MAKE_AV7110_INFO(gxs_1_3,    "Galaxis DVB-S rev1.3");
-
-static struct pci_device_id pci_tbl[] = {
-	MAKE_EXTENSION_PCI(fsc,         0x110a, 0x0000),
-	MAKE_EXTENSION_PCI(tts_1_X_fsc, 0x13c2, 0x0000),
-	MAKE_EXTENSION_PCI(ttt_1_X,     0x13c2, 0x0001),
-	MAKE_EXTENSION_PCI(ttc_2_X,     0x13c2, 0x0002),
-	MAKE_EXTENSION_PCI(tts_2_X,     0x13c2, 0x0003),
-	MAKE_EXTENSION_PCI(gxs_1_3,     0x13c2, 0x0004),
-	MAKE_EXTENSION_PCI(fss,         0x13c2, 0x0006),
-	MAKE_EXTENSION_PCI(ttt,         0x13c2, 0x0008),
-	MAKE_EXTENSION_PCI(ttc_1_X,     0x13c2, 0x000a),
-	MAKE_EXTENSION_PCI(tts_2_3,     0x13c2, 0x000e),
-	MAKE_EXTENSION_PCI(tts_1_3se,   0x13c2, 0x1002),
-
-/*	MAKE_EXTENSION_PCI(???, 0x13c2, 0x0005), UNDEFINED CARD */ // Technisat SkyStar1
-/*	MAKE_EXTENSION_PCI(???, 0x13c2, 0x0009), UNDEFINED CARD */ // TT/Hauppauge WinTV Nexus-CA v????
-
-	{
-		.vendor    = 0,
-	}
-};
-
-MODULE_DEVICE_TABLE(pci, pci_tbl);
-
-
-static struct saa7146_extension av7110_extension_driver = {
-	.name		= "av7110",
-	.flags		= SAA7146_USE_I2C_IRQ,
-
-	.module		= THIS_MODULE,
-	.pci_tbl	= &pci_tbl[0],
-	.attach		= av7110_attach,
-	.detach		= __devexit_p(av7110_detach),
-
-	.irq_mask	= MASK_19 | MASK_03 | MASK_10,
-	.irq_func	= av7110_irq,
-};
-
-
-static int __init av7110_init(void)
-{
-	int retval;
-	retval = saa7146_register_extension(&av7110_extension_driver);
-	return retval;
-}
-
-
-static void __exit av7110_exit(void)
-{
-	saa7146_unregister_extension(&av7110_extension_driver);
-}
-
-module_init(av7110_init);
-module_exit(av7110_exit);
-
-MODULE_DESCRIPTION("driver for the SAA7146 based AV110 PCI DVB cards by "
-		   "Siemens, Technotrend, Hauppauge");
-MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, others");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/ttpci/av7110.h b/drivers/media/dvb/ttpci/av7110.h
deleted file mode 100644
index 88b3b2d..0000000
--- a/drivers/media/dvb/ttpci/av7110.h
+++ /dev/null
@@ -1,314 +0,0 @@
-#ifndef _AV7110_H_
-#define _AV7110_H_
-
-#include <linux/interrupt.h>
-#include <linux/socket.h>
-#include <linux/netdevice.h>
-#include <linux/i2c.h>
-#include <linux/input.h>
-
-#include <linux/dvb/video.h>
-#include <linux/dvb/audio.h>
-#include <linux/dvb/dmx.h>
-#include <linux/dvb/ca.h>
-#include <linux/dvb/osd.h>
-#include <linux/dvb/net.h>
-#include <linux/mutex.h>
-
-#include "dvbdev.h"
-#include "demux.h"
-#include "dvb_demux.h"
-#include "dmxdev.h"
-#include "dvb_filter.h"
-#include "dvb_net.h"
-#include "dvb_ringbuffer.h"
-#include "dvb_frontend.h"
-#include "ves1820.h"
-#include "ves1x93.h"
-#include "stv0299.h"
-#include "tda8083.h"
-#include "sp8870.h"
-#include "stv0297.h"
-#include "l64781.h"
-
-#include <media/saa7146_vv.h>
-
-
-#define ANALOG_TUNER_VES1820 1
-#define ANALOG_TUNER_STV0297 2
-
-extern int av7110_debug;
-
-#define dprintk(level,args...) \
-	    do { if ((av7110_debug & level)) { printk("dvb-ttpci: %s(): ", __func__); printk(args); } } while (0)
-
-#define MAXFILT 32
-
-enum {AV_PES_STREAM, PS_STREAM, TS_STREAM, PES_STREAM};
-
-enum av7110_video_mode {
-	AV7110_VIDEO_MODE_PAL 	= 0,
-	AV7110_VIDEO_MODE_NTSC	= 1
-};
-
-struct av7110_p2t {
-	u8		  pes[TS_SIZE];
-	u8		  counter;
-	long int	  pos;
-	int		  frags;
-	struct dvb_demux_feed *feed;
-};
-
-/* video MPEG decoder events: */
-/* (code copied from dvb_frontend.c, should maybe be factored out...) */
-#define MAX_VIDEO_EVENT 8
-struct dvb_video_events {
-	struct video_event	  events[MAX_VIDEO_EVENT];
-	int			  eventw;
-	int			  eventr;
-	int			  overflow;
-	wait_queue_head_t	  wait_queue;
-	spinlock_t		  lock;
-};
-
-
-struct av7110;
-
-/* infrared remote control */
-struct infrared {
-	u16	key_map[256];
-	struct input_dev	*input_dev;
-	char			input_phys[32];
-	struct timer_list	keyup_timer;
-	struct tasklet_struct	ir_tasklet;
-	void			(*ir_handler)(struct av7110 *av7110, u32 ircom);
-	u32			ir_command;
-	u32			ir_config;
-	u32			device_mask;
-	u8			protocol;
-	u8			inversion;
-	u16			last_key;
-	u16			last_toggle;
-	u8			delay_timer_finished;
-};
-
-
-/* place to store all the necessary device information */
-struct av7110 {
-
-	/* devices */
-
-	struct dvb_device	dvb_dev;
-	struct dvb_net		dvb_net;
-
-	struct video_device	*v4l_dev;
-	struct video_device	*vbi_dev;
-
-	struct saa7146_dev	*dev;
-
-	struct i2c_adapter	i2c_adap;
-
-	char			*card_name;
-
-	/* support for analog module of dvb-c */
-	int			analog_tuner_flags;
-	int			current_input;
-	u32			current_freq;
-
-	struct tasklet_struct	debi_tasklet;
-	struct tasklet_struct	gpio_tasklet;
-
-	int adac_type;	       /* audio DAC type */
-#define DVB_ADAC_TI	  0
-#define DVB_ADAC_CRYSTAL  1
-#define DVB_ADAC_MSP34x0  2
-#define DVB_ADAC_MSP34x5  3
-#define DVB_ADAC_NONE	 -1
-
-
-	/* buffers */
-
-	void		       *iobuf;	 /* memory for all buffers */
-	struct dvb_ringbuffer	avout;   /* buffer for video or A/V mux */
-#define AVOUTLEN (128*1024)
-	struct dvb_ringbuffer	aout;    /* buffer for audio */
-#define AOUTLEN (64*1024)
-	void		       *bmpbuf;
-#define BMPLEN (8*32768+1024)
-
-	/* bitmap buffers and states */
-
-	int			bmpp;
-	int			bmplen;
-	volatile int		bmp_state;
-#define BMP_NONE     0
-#define BMP_LOADING  1
-#define BMP_LOADED   2
-	wait_queue_head_t	bmpq;
-
-
-	/* DEBI and polled command interface */
-
-	spinlock_t		debilock;
-	struct mutex		dcomlock;
-	volatile int		debitype;
-	volatile int		debilen;
-
-
-	/* Recording and playback flags */
-
-	int			rec_mode;
-	int			playing;
-#define RP_NONE  0
-#define RP_VIDEO 1
-#define RP_AUDIO 2
-#define RP_AV	 3
-
-
-	/* OSD */
-
-	int			osdwin;      /* currently active window */
-	u16			osdbpp[8];
-	struct mutex		osd_mutex;
-
-	/* CA */
-
-	ca_slot_info_t		ci_slot[2];
-
-	enum av7110_video_mode	vidmode;
-	struct dmxdev		dmxdev;
-	struct dvb_demux	demux;
-
-	struct dmx_frontend	hw_frontend;
-	struct dmx_frontend	mem_frontend;
-
-	/* for budget mode demux1 */
-	struct dmxdev		dmxdev1;
-	struct dvb_demux	demux1;
-	struct dvb_net		dvb_net1;
-	spinlock_t		feedlock1;
-	int			feeding1;
-	u32			ttbp;
-	unsigned char           *grabbing;
-	struct saa7146_pgtable  pt;
-	struct tasklet_struct   vpe_tasklet;
-	bool			full_ts;
-
-	int			fe_synced;
-	struct mutex		pid_mutex;
-
-	int			video_blank;
-	struct video_status	videostate;
-	u16			display_panscan;
-	int			display_ar;
-	int			trickmode;
-#define TRICK_NONE   0
-#define TRICK_FAST   1
-#define TRICK_SLOW   2
-#define TRICK_FREEZE 3
-	struct audio_status	audiostate;
-
-	struct dvb_demux_filter *handle2filter[32];
-	struct av7110_p2t	 p2t_filter[MAXFILT];
-	struct dvb_filter_pes2ts p2t[2];
-	struct ipack		 ipack[2];
-	u8			*kbuf[2];
-
-	int sinfo;
-	int feeding;
-
-	int arm_errors;
-	int registered;
-
-
-	/* AV711X */
-
-	u32		    arm_fw;
-	u32		    arm_rtsl;
-	u32		    arm_vid;
-	u32		    arm_app;
-	u32		    avtype;
-	int		    arm_ready;
-	struct task_struct *arm_thread;
-	wait_queue_head_t   arm_wait;
-	u16		    arm_loops;
-
-	void		   *debi_virt;
-	dma_addr_t	    debi_bus;
-
-	u16		    pids[DMX_PES_OTHER];
-
-	struct dvb_ringbuffer	 ci_rbuffer;
-	struct dvb_ringbuffer	 ci_wbuffer;
-
-	struct audio_mixer	mixer;
-
-	struct dvb_adapter	 dvb_adapter;
-	struct dvb_device	 *video_dev;
-	struct dvb_device	 *audio_dev;
-	struct dvb_device	 *ca_dev;
-	struct dvb_device	 *osd_dev;
-
-	struct dvb_video_events  video_events;
-	video_size_t		 video_size;
-
-	u16			wssMode;
-	u16			wssData;
-
-	struct infrared		ir;
-
-	/* firmware stuff */
-	unsigned char *bin_fw;
-	unsigned long size_fw;
-
-	unsigned char *bin_dpram;
-	unsigned long size_dpram;
-
-	unsigned char *bin_root;
-	unsigned long size_root;
-
-	struct dvb_frontend* fe;
-	fe_status_t fe_status;
-
-	/* crash recovery */
-	void				(*recover)(struct av7110* av7110);
-	fe_sec_voltage_t		saved_voltage;
-	fe_sec_tone_mode_t		saved_tone;
-	struct dvb_diseqc_master_cmd	saved_master_cmd;
-	fe_sec_mini_cmd_t		saved_minicmd;
-
-	int (*fe_init)(struct dvb_frontend* fe);
-	int (*fe_read_status)(struct dvb_frontend* fe, fe_status_t* status);
-	int (*fe_diseqc_reset_overload)(struct dvb_frontend* fe);
-	int (*fe_diseqc_send_master_cmd)(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd);
-	int (*fe_diseqc_send_burst)(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd);
-	int (*fe_set_tone)(struct dvb_frontend* fe, fe_sec_tone_mode_t tone);
-	int (*fe_set_voltage)(struct dvb_frontend* fe, fe_sec_voltage_t voltage);
-	int (*fe_dishnetwork_send_legacy_command)(struct dvb_frontend* fe, unsigned long cmd);
-	int (*fe_set_frontend)(struct dvb_frontend *fe);
-};
-
-
-extern int ChangePIDs(struct av7110 *av7110, u16 vpid, u16 apid, u16 ttpid,
-		       u16 subpid, u16 pcrpid);
-
-extern int av7110_check_ir_config(struct av7110 *av7110, int force);
-extern int av7110_ir_init(struct av7110 *av7110);
-extern void av7110_ir_exit(struct av7110 *av7110);
-
-/* msp3400 i2c subaddresses */
-#define MSP_WR_DEM 0x10
-#define MSP_RD_DEM 0x11
-#define MSP_WR_DSP 0x12
-#define MSP_RD_DSP 0x13
-
-extern int i2c_writereg(struct av7110 *av7110, u8 id, u8 reg, u8 val);
-extern u8 i2c_readreg(struct av7110 *av7110, u8 id, u8 reg);
-extern int msp_writereg(struct av7110 *av7110, u8 dev, u16 reg, u16 val);
-
-
-extern int av7110_init_analog_module(struct av7110 *av7110);
-extern int av7110_init_v4l(struct av7110 *av7110);
-extern int av7110_exit_v4l(struct av7110 *av7110);
-
-#endif /* _AV7110_H_ */
diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c
deleted file mode 100644
index 952b33d..0000000
--- a/drivers/media/dvb/ttpci/av7110_av.c
+++ /dev/null
@@ -1,1626 +0,0 @@
-/*
- * av7110_av.c: audio and video MPEG decoder stuff
- *
- * Copyright (C) 1999-2002 Ralph  Metzler
- *                       & Marcus Metzler for convergence integrated media GmbH
- *
- * originally based on code by:
- * Copyright (C) 1998,1999 Christian Theiss <mistert@rz.fh-augsburg.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org/ 
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/fs.h>
-
-#include "av7110.h"
-#include "av7110_hw.h"
-#include "av7110_av.h"
-#include "av7110_ipack.h"
-
-/* MPEG-2 (ISO 13818 / H.222.0) stream types */
-#define PROG_STREAM_MAP  0xBC
-#define PRIVATE_STREAM1  0xBD
-#define PADDING_STREAM	 0xBE
-#define PRIVATE_STREAM2  0xBF
-#define AUDIO_STREAM_S	 0xC0
-#define AUDIO_STREAM_E	 0xDF
-#define VIDEO_STREAM_S	 0xE0
-#define VIDEO_STREAM_E	 0xEF
-#define ECM_STREAM	 0xF0
-#define EMM_STREAM	 0xF1
-#define DSM_CC_STREAM	 0xF2
-#define ISO13522_STREAM  0xF3
-#define PROG_STREAM_DIR  0xFF
-
-#define PTS_DTS_FLAGS	 0xC0
-
-//pts_dts flags
-#define PTS_ONLY	 0x80
-#define PTS_DTS		 0xC0
-#define TS_SIZE		 188
-#define TRANS_ERROR	 0x80
-#define PAY_START	 0x40
-#define TRANS_PRIO	 0x20
-#define PID_MASK_HI	 0x1F
-//flags
-#define TRANS_SCRMBL1	 0x80
-#define TRANS_SCRMBL2	 0x40
-#define ADAPT_FIELD	 0x20
-#define PAYLOAD		 0x10
-#define COUNT_MASK	 0x0F
-
-// adaptation flags
-#define DISCON_IND	 0x80
-#define RAND_ACC_IND	 0x40
-#define ES_PRI_IND	 0x20
-#define PCR_FLAG	 0x10
-#define OPCR_FLAG	 0x08
-#define SPLICE_FLAG	 0x04
-#define TRANS_PRIV	 0x02
-#define ADAP_EXT_FLAG	 0x01
-
-// adaptation extension flags
-#define LTW_FLAG	 0x80
-#define PIECE_RATE	 0x40
-#define SEAM_SPLICE	 0x20
-
-
-static void p_to_t(u8 const *buf, long int length, u16 pid,
-		   u8 *counter, struct dvb_demux_feed *feed);
-static int write_ts_to_decoder(struct av7110 *av7110, int type, const u8 *buf, size_t len);
-
-
-int av7110_record_cb(struct dvb_filter_pes2ts *p2t, u8 *buf, size_t len)
-{
-	struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *) p2t->priv;
-
-	if (!(dvbdmxfeed->ts_type & TS_PACKET))
-		return 0;
-	if (buf[3] == 0xe0)	 // video PES do not have a length in TS
-		buf[4] = buf[5] = 0;
-	if (dvbdmxfeed->ts_type & TS_PAYLOAD_ONLY)
-		return dvbdmxfeed->cb.ts(buf, len, NULL, 0,
-					 &dvbdmxfeed->feed.ts, DMX_OK);
-	else
-		return dvb_filter_pes2ts(p2t, buf, len, 1);
-}
-
-static int dvb_filter_pes2ts_cb(void *priv, unsigned char *data)
-{
-	struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *) priv;
-
-	dvbdmxfeed->cb.ts(data, 188, NULL, 0,
-			  &dvbdmxfeed->feed.ts, DMX_OK);
-	return 0;
-}
-
-int av7110_av_start_record(struct av7110 *av7110, int av,
-			   struct dvb_demux_feed *dvbdmxfeed)
-{
-	int ret = 0;
-	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
-
-	dprintk(2, "av7110:%p, , dvb_demux_feed:%p\n", av7110, dvbdmxfeed);
-
-	if (av7110->playing || (av7110->rec_mode & av))
-		return -EBUSY;
-	av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Stop, 0);
-	dvbdmx->recording = 1;
-	av7110->rec_mode |= av;
-
-	switch (av7110->rec_mode) {
-	case RP_AUDIO:
-		dvb_filter_pes2ts_init(&av7110->p2t[0],
-				       dvbdmx->pesfilter[0]->pid,
-				       dvb_filter_pes2ts_cb,
-				       (void *) dvbdmx->pesfilter[0]);
-		ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Record, 2, AudioPES, 0);
-		break;
-
-	case RP_VIDEO:
-		dvb_filter_pes2ts_init(&av7110->p2t[1],
-				       dvbdmx->pesfilter[1]->pid,
-				       dvb_filter_pes2ts_cb,
-				       (void *) dvbdmx->pesfilter[1]);
-		ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Record, 2, VideoPES, 0);
-		break;
-
-	case RP_AV:
-		dvb_filter_pes2ts_init(&av7110->p2t[0],
-				       dvbdmx->pesfilter[0]->pid,
-				       dvb_filter_pes2ts_cb,
-				       (void *) dvbdmx->pesfilter[0]);
-		dvb_filter_pes2ts_init(&av7110->p2t[1],
-				       dvbdmx->pesfilter[1]->pid,
-				       dvb_filter_pes2ts_cb,
-				       (void *) dvbdmx->pesfilter[1]);
-		ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Record, 2, AV_PES, 0);
-		break;
-	}
-	return ret;
-}
-
-int av7110_av_start_play(struct av7110 *av7110, int av)
-{
-	int ret = 0;
-	dprintk(2, "av7110:%p, \n", av7110);
-
-	if (av7110->rec_mode)
-		return -EBUSY;
-	if (av7110->playing & av)
-		return -EBUSY;
-
-	av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Stop, 0);
-
-	if (av7110->playing == RP_NONE) {
-		av7110_ipack_reset(&av7110->ipack[0]);
-		av7110_ipack_reset(&av7110->ipack[1]);
-	}
-
-	av7110->playing |= av;
-	switch (av7110->playing) {
-	case RP_AUDIO:
-		ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, AudioPES, 0);
-		break;
-	case RP_VIDEO:
-		ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, VideoPES, 0);
-		av7110->sinfo = 0;
-		break;
-	case RP_AV:
-		av7110->sinfo = 0;
-		ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, AV_PES, 0);
-		break;
-	}
-	return ret;
-}
-
-int av7110_av_stop(struct av7110 *av7110, int av)
-{
-	int ret = 0;
-	dprintk(2, "av7110:%p, \n", av7110);
-
-	if (!(av7110->playing & av) && !(av7110->rec_mode & av))
-		return 0;
-	av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Stop, 0);
-	if (av7110->playing) {
-		av7110->playing &= ~av;
-		switch (av7110->playing) {
-		case RP_AUDIO:
-			ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, AudioPES, 0);
-			break;
-		case RP_VIDEO:
-			ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, VideoPES, 0);
-			break;
-		case RP_NONE:
-			ret = av7110_set_vidmode(av7110, av7110->vidmode);
-			break;
-		}
-	} else {
-		av7110->rec_mode &= ~av;
-		switch (av7110->rec_mode) {
-		case RP_AUDIO:
-			ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Record, 2, AudioPES, 0);
-			break;
-		case RP_VIDEO:
-			ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Record, 2, VideoPES, 0);
-			break;
-		case RP_NONE:
-			break;
-		}
-	}
-	return ret;
-}
-
-
-int av7110_pes_play(void *dest, struct dvb_ringbuffer *buf, int dlen)
-{
-	int len;
-	u32 sync;
-	u16 blen;
-
-	if (!dlen) {
-		wake_up(&buf->queue);
-		return -1;
-	}
-	while (1) {
-		len = dvb_ringbuffer_avail(buf);
-		if (len < 6) {
-			wake_up(&buf->queue);
-			return -1;
-		}
-		sync =  DVB_RINGBUFFER_PEEK(buf, 0) << 24;
-		sync |= DVB_RINGBUFFER_PEEK(buf, 1) << 16;
-		sync |= DVB_RINGBUFFER_PEEK(buf, 2) << 8;
-		sync |= DVB_RINGBUFFER_PEEK(buf, 3);
-
-		if (((sync &~ 0x0f) == 0x000001e0) ||
-		    ((sync &~ 0x1f) == 0x000001c0) ||
-		    (sync == 0x000001bd))
-			break;
-		printk("resync\n");
-		DVB_RINGBUFFER_SKIP(buf, 1);
-	}
-	blen =  DVB_RINGBUFFER_PEEK(buf, 4) << 8;
-	blen |= DVB_RINGBUFFER_PEEK(buf, 5);
-	blen += 6;
-	if (len < blen || blen > dlen) {
-		//printk("buffer empty - avail %d blen %u dlen %d\n", len, blen, dlen);
-		wake_up(&buf->queue);
-		return -1;
-	}
-
-	dvb_ringbuffer_read(buf, dest, (size_t) blen);
-
-	dprintk(2, "pread=0x%08lx, pwrite=0x%08lx\n",
-	       (unsigned long) buf->pread, (unsigned long) buf->pwrite);
-	wake_up(&buf->queue);
-	return blen;
-}
-
-
-int av7110_set_volume(struct av7110 *av7110, int volleft, int volright)
-{
-	int err, vol, val, balance = 0;
-
-	dprintk(2, "av7110:%p, \n", av7110);
-
-	av7110->mixer.volume_left = volleft;
-	av7110->mixer.volume_right = volright;
-
-	switch (av7110->adac_type) {
-	case DVB_ADAC_TI:
-		volleft = (volleft * 256) / 1036;
-		volright = (volright * 256) / 1036;
-		if (volleft > 0x3f)
-			volleft = 0x3f;
-		if (volright > 0x3f)
-			volright = 0x3f;
-		if ((err = SendDAC(av7110, 3, 0x80 + volleft)))
-			return err;
-		return SendDAC(av7110, 4, volright);
-
-	case DVB_ADAC_CRYSTAL:
-		volleft = 127 - volleft / 2;
-		volright = 127 - volright / 2;
-		i2c_writereg(av7110, 0x20, 0x03, volleft);
-		i2c_writereg(av7110, 0x20, 0x04, volright);
-		return 0;
-
-	case DVB_ADAC_MSP34x0:
-		vol  = (volleft > volright) ? volleft : volright;
-		val	= (vol * 0x73 / 255) << 8;
-		if (vol > 0)
-		       balance = ((volright - volleft) * 127) / vol;
-		msp_writereg(av7110, MSP_WR_DSP, 0x0001, balance << 8);
-		msp_writereg(av7110, MSP_WR_DSP, 0x0000, val); /* loudspeaker */
-		msp_writereg(av7110, MSP_WR_DSP, 0x0006, val); /* headphonesr */
-		return 0;
-
-	case DVB_ADAC_MSP34x5:
-		vol = (volleft > volright) ? volleft : volright;
-		val = (vol * 0x73 / 255) << 8;
-		if (vol > 0)
-			balance = ((volright - volleft) * 127) / vol;
-		msp_writereg(av7110, MSP_WR_DSP, 0x0001, balance << 8);
-		msp_writereg(av7110, MSP_WR_DSP, 0x0000, val); /* loudspeaker */
-		return 0;
-	}
-
-	return 0;
-}
-
-int av7110_set_vidmode(struct av7110 *av7110, enum av7110_video_mode mode)
-{
-	int ret;
-	dprintk(2, "av7110:%p, \n", av7110);
-
-	ret = av7110_fw_cmd(av7110, COMTYPE_ENCODER, LoadVidCode, 1, mode);
-
-	if (!ret && !av7110->playing) {
-		ret = ChangePIDs(av7110, av7110->pids[DMX_PES_VIDEO],
-			   av7110->pids[DMX_PES_AUDIO],
-			   av7110->pids[DMX_PES_TELETEXT],
-			   0, av7110->pids[DMX_PES_PCR]);
-		if (!ret)
-			ret = av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, Scan, 0);
-	}
-	return ret;
-}
-
-
-static enum av7110_video_mode sw2mode[16] = {
-	AV7110_VIDEO_MODE_PAL, AV7110_VIDEO_MODE_NTSC,
-	AV7110_VIDEO_MODE_NTSC, AV7110_VIDEO_MODE_PAL,
-	AV7110_VIDEO_MODE_NTSC, AV7110_VIDEO_MODE_NTSC,
-	AV7110_VIDEO_MODE_PAL, AV7110_VIDEO_MODE_NTSC,
-	AV7110_VIDEO_MODE_PAL, AV7110_VIDEO_MODE_PAL,
-	AV7110_VIDEO_MODE_PAL, AV7110_VIDEO_MODE_PAL,
-	AV7110_VIDEO_MODE_PAL, AV7110_VIDEO_MODE_PAL,
-	AV7110_VIDEO_MODE_PAL, AV7110_VIDEO_MODE_PAL,
-};
-
-static int get_video_format(struct av7110 *av7110, u8 *buf, int count)
-{
-	int i;
-	int hsize, vsize;
-	int sw;
-	u8 *p;
-	int ret = 0;
-
-	dprintk(2, "av7110:%p, \n", av7110);
-
-	if (av7110->sinfo)
-		return 0;
-	for (i = 7; i < count - 10; i++) {
-		p = buf + i;
-		if (p[0] || p[1] || p[2] != 0x01 || p[3] != 0xb3)
-			continue;
-		p += 4;
-		hsize = ((p[1] &0xF0) >> 4) | (p[0] << 4);
-		vsize = ((p[1] &0x0F) << 8) | (p[2]);
-		sw = (p[3] & 0x0F);
-		ret = av7110_set_vidmode(av7110, sw2mode[sw]);
-		if (!ret) {
-			dprintk(2, "playback %dx%d fr=%d\n", hsize, vsize, sw);
-			av7110->sinfo = 1;
-		}
-		break;
-	}
-	return ret;
-}
-
-
-/****************************************************************************
- * I/O buffer management and control
- ****************************************************************************/
-
-static inline long aux_ring_buffer_write(struct dvb_ringbuffer *rbuf,
-					 const u8 *buf, unsigned long count)
-{
-	unsigned long todo = count;
-	int free;
-
-	while (todo > 0) {
-		if (dvb_ringbuffer_free(rbuf) < 2048) {
-			if (wait_event_interruptible(rbuf->queue,
-						     (dvb_ringbuffer_free(rbuf) >= 2048)))
-				return count - todo;
-		}
-		free = dvb_ringbuffer_free(rbuf);
-		if (free > todo)
-			free = todo;
-		dvb_ringbuffer_write(rbuf, buf, free);
-		todo -= free;
-		buf += free;
-	}
-
-	return count - todo;
-}
-
-static void play_video_cb(u8 *buf, int count, void *priv)
-{
-	struct av7110 *av7110 = (struct av7110 *) priv;
-	dprintk(2, "av7110:%p, \n", av7110);
-
-	if ((buf[3] & 0xe0) == 0xe0) {
-		get_video_format(av7110, buf, count);
-		aux_ring_buffer_write(&av7110->avout, buf, count);
-	} else
-		aux_ring_buffer_write(&av7110->aout, buf, count);
-}
-
-static void play_audio_cb(u8 *buf, int count, void *priv)
-{
-	struct av7110 *av7110 = (struct av7110 *) priv;
-	dprintk(2, "av7110:%p, \n", av7110);
-
-	aux_ring_buffer_write(&av7110->aout, buf, count);
-}
-
-
-#define FREE_COND_TS (dvb_ringbuffer_free(rb) >= 4096)
-
-static ssize_t ts_play(struct av7110 *av7110, const char __user *buf,
-		       unsigned long count, int nonblock, int type)
-{
-	struct dvb_ringbuffer *rb;
-	u8 *kb;
-	unsigned long todo = count;
-
-	dprintk(2, "%s: type %d cnt %lu\n", __func__, type, count);
-
-	rb = (type) ? &av7110->avout : &av7110->aout;
-	kb = av7110->kbuf[type];
-
-	if (!kb)
-		return -ENOBUFS;
-
-	if (nonblock && !FREE_COND_TS)
-		return -EWOULDBLOCK;
-
-	while (todo >= TS_SIZE) {
-		if (!FREE_COND_TS) {
-			if (nonblock)
-				return count - todo;
-			if (wait_event_interruptible(rb->queue, FREE_COND_TS))
-				return count - todo;
-		}
-		if (copy_from_user(kb, buf, TS_SIZE))
-			return -EFAULT;
-		write_ts_to_decoder(av7110, type, kb, TS_SIZE);
-		todo -= TS_SIZE;
-		buf += TS_SIZE;
-	}
-
-	return count - todo;
-}
-
-
-#define FREE_COND (dvb_ringbuffer_free(&av7110->avout) >= 20 * 1024 && \
-		   dvb_ringbuffer_free(&av7110->aout) >= 20 * 1024)
-
-static ssize_t dvb_play(struct av7110 *av7110, const char __user *buf,
-			unsigned long count, int nonblock, int type)
-{
-	unsigned long todo = count, n;
-	dprintk(2, "av7110:%p, \n", av7110);
-
-	if (!av7110->kbuf[type])
-		return -ENOBUFS;
-
-	if (nonblock && !FREE_COND)
-		return -EWOULDBLOCK;
-
-	while (todo > 0) {
-		if (!FREE_COND) {
-			if (nonblock)
-				return count - todo;
-			if (wait_event_interruptible(av7110->avout.queue,
-						     FREE_COND))
-				return count - todo;
-		}
-		n = todo;
-		if (n > IPACKS * 2)
-			n = IPACKS * 2;
-		if (copy_from_user(av7110->kbuf[type], buf, n))
-			return -EFAULT;
-		av7110_ipack_instant_repack(av7110->kbuf[type], n,
-					    &av7110->ipack[type]);
-		todo -= n;
-		buf += n;
-	}
-	return count - todo;
-}
-
-static ssize_t dvb_play_kernel(struct av7110 *av7110, const u8 *buf,
-			unsigned long count, int nonblock, int type)
-{
-	unsigned long todo = count, n;
-	dprintk(2, "av7110:%p, \n", av7110);
-
-	if (!av7110->kbuf[type])
-		return -ENOBUFS;
-
-	if (nonblock && !FREE_COND)
-		return -EWOULDBLOCK;
-
-	while (todo > 0) {
-		if (!FREE_COND) {
-			if (nonblock)
-				return count - todo;
-			if (wait_event_interruptible(av7110->avout.queue,
-						     FREE_COND))
-				return count - todo;
-		}
-		n = todo;
-		if (n > IPACKS * 2)
-			n = IPACKS * 2;
-		av7110_ipack_instant_repack(buf, n, &av7110->ipack[type]);
-		todo -= n;
-		buf += n;
-	}
-	return count - todo;
-}
-
-static ssize_t dvb_aplay(struct av7110 *av7110, const char __user *buf,
-			 unsigned long count, int nonblock, int type)
-{
-	unsigned long todo = count, n;
-	dprintk(2, "av7110:%p, \n", av7110);
-
-	if (!av7110->kbuf[type])
-		return -ENOBUFS;
-	if (nonblock && dvb_ringbuffer_free(&av7110->aout) < 20 * 1024)
-		return -EWOULDBLOCK;
-
-	while (todo > 0) {
-		if (dvb_ringbuffer_free(&av7110->aout) < 20 * 1024) {
-			if (nonblock)
-				return count - todo;
-			if (wait_event_interruptible(av7110->aout.queue,
-					(dvb_ringbuffer_free(&av7110->aout) >= 20 * 1024)))
-				return count-todo;
-		}
-		n = todo;
-		if (n > IPACKS * 2)
-			n = IPACKS * 2;
-		if (copy_from_user(av7110->kbuf[type], buf, n))
-			return -EFAULT;
-		av7110_ipack_instant_repack(av7110->kbuf[type], n,
-					    &av7110->ipack[type]);
-		todo -= n;
-		buf += n;
-	}
-	return count - todo;
-}
-
-void av7110_p2t_init(struct av7110_p2t *p, struct dvb_demux_feed *feed)
-{
-	memset(p->pes, 0, TS_SIZE);
-	p->counter = 0;
-	p->pos = 0;
-	p->frags = 0;
-	if (feed)
-		p->feed = feed;
-}
-
-static void clear_p2t(struct av7110_p2t *p)
-{
-	memset(p->pes, 0, TS_SIZE);
-//	p->counter = 0;
-	p->pos = 0;
-	p->frags = 0;
-}
-
-
-static int find_pes_header(u8 const *buf, long int length, int *frags)
-{
-	int c = 0;
-	int found = 0;
-
-	*frags = 0;
-
-	while (c < length - 3 && !found) {
-		if (buf[c] == 0x00 && buf[c + 1] == 0x00 &&
-		    buf[c + 2] == 0x01) {
-			switch ( buf[c + 3] ) {
-			case PROG_STREAM_MAP:
-			case PRIVATE_STREAM2:
-			case PROG_STREAM_DIR:
-			case ECM_STREAM     :
-			case EMM_STREAM     :
-			case PADDING_STREAM :
-			case DSM_CC_STREAM  :
-			case ISO13522_STREAM:
-			case PRIVATE_STREAM1:
-			case AUDIO_STREAM_S ... AUDIO_STREAM_E:
-			case VIDEO_STREAM_S ... VIDEO_STREAM_E:
-				found = 1;
-				break;
-
-			default:
-				c++;
-				break;
-			}
-		} else
-			c++;
-	}
-	if (c == length - 3 && !found) {
-		if (buf[length - 1] == 0x00)
-			*frags = 1;
-		if (buf[length - 2] == 0x00 &&
-		    buf[length - 1] == 0x00)
-			*frags = 2;
-		if (buf[length - 3] == 0x00 &&
-		    buf[length - 2] == 0x00 &&
-		    buf[length - 1] == 0x01)
-			*frags = 3;
-		return -1;
-	}
-
-	return c;
-}
-
-void av7110_p2t_write(u8 const *buf, long int length, u16 pid, struct av7110_p2t *p)
-{
-	int c, c2, l, add;
-	int check, rest;
-
-	c = 0;
-	c2 = 0;
-	if (p->frags){
-		check = 0;
-		switch(p->frags) {
-		case 1:
-			if (buf[c] == 0x00 && buf[c + 1] == 0x01) {
-				check = 1;
-				c += 2;
-			}
-			break;
-		case 2:
-			if (buf[c] == 0x01) {
-				check = 1;
-				c++;
-			}
-			break;
-		case 3:
-			check = 1;
-		}
-		if (check) {
-			switch (buf[c]) {
-			case PROG_STREAM_MAP:
-			case PRIVATE_STREAM2:
-			case PROG_STREAM_DIR:
-			case ECM_STREAM     :
-			case EMM_STREAM     :
-			case PADDING_STREAM :
-			case DSM_CC_STREAM  :
-			case ISO13522_STREAM:
-			case PRIVATE_STREAM1:
-			case AUDIO_STREAM_S ... AUDIO_STREAM_E:
-			case VIDEO_STREAM_S ... VIDEO_STREAM_E:
-				p->pes[0] = 0x00;
-				p->pes[1] = 0x00;
-				p->pes[2] = 0x01;
-				p->pes[3] = buf[c];
-				p->pos = 4;
-				memcpy(p->pes + p->pos, buf + c, (TS_SIZE - 4) - p->pos);
-				c += (TS_SIZE - 4) - p->pos;
-				p_to_t(p->pes, (TS_SIZE - 4), pid, &p->counter, p->feed);
-				clear_p2t(p);
-				break;
-
-			default:
-				c = 0;
-				break;
-			}
-		}
-		p->frags = 0;
-	}
-
-	if (p->pos) {
-		c2 = find_pes_header(buf + c, length - c, &p->frags);
-		if (c2 >= 0 && c2 < (TS_SIZE - 4) - p->pos)
-			l = c2+c;
-		else
-			l = (TS_SIZE - 4) - p->pos;
-		memcpy(p->pes + p->pos, buf, l);
-		c += l;
-		p->pos += l;
-		p_to_t(p->pes, p->pos, pid, &p->counter, p->feed);
-		clear_p2t(p);
-	}
-
-	add = 0;
-	while (c < length) {
-		c2 = find_pes_header(buf + c + add, length - c - add, &p->frags);
-		if (c2 >= 0) {
-			c2 += c + add;
-			if (c2 > c){
-				p_to_t(buf + c, c2 - c, pid, &p->counter, p->feed);
-				c = c2;
-				clear_p2t(p);
-				add = 0;
-			} else
-				add = 1;
-		} else {
-			l = length - c;
-			rest = l % (TS_SIZE - 4);
-			l -= rest;
-			p_to_t(buf + c, l, pid, &p->counter, p->feed);
-			memcpy(p->pes, buf + c + l, rest);
-			p->pos = rest;
-			c = length;
-		}
-	}
-}
-
-
-static int write_ts_header2(u16 pid, u8 *counter, int pes_start, u8 *buf, u8 length)
-{
-	int i;
-	int c = 0;
-	int fill;
-	u8 tshead[4] = { 0x47, 0x00, 0x00, 0x10 };
-
-	fill = (TS_SIZE - 4) - length;
-	if (pes_start)
-		tshead[1] = 0x40;
-	if (fill)
-		tshead[3] = 0x30;
-	tshead[1] |= (u8)((pid & 0x1F00) >> 8);
-	tshead[2] |= (u8)(pid & 0x00FF);
-	tshead[3] |= ((*counter)++ & 0x0F);
-	memcpy(buf, tshead, 4);
-	c += 4;
-
-	if (fill) {
-		buf[4] = fill - 1;
-		c++;
-		if (fill > 1) {
-			buf[5] = 0x00;
-			c++;
-		}
-		for (i = 6; i < fill + 4; i++) {
-			buf[i] = 0xFF;
-			c++;
-		}
-	}
-
-	return c;
-}
-
-
-static void p_to_t(u8 const *buf, long int length, u16 pid, u8 *counter,
-		   struct dvb_demux_feed *feed)
-{
-	int l, pes_start;
-	u8 obuf[TS_SIZE];
-	long c = 0;
-
-	pes_start = 0;
-	if (length > 3 &&
-	     buf[0] == 0x00 && buf[1] == 0x00 && buf[2] == 0x01)
-		switch (buf[3]) {
-			case PROG_STREAM_MAP:
-			case PRIVATE_STREAM2:
-			case PROG_STREAM_DIR:
-			case ECM_STREAM     :
-			case EMM_STREAM     :
-			case PADDING_STREAM :
-			case DSM_CC_STREAM  :
-			case ISO13522_STREAM:
-			case PRIVATE_STREAM1:
-			case AUDIO_STREAM_S ... AUDIO_STREAM_E:
-			case VIDEO_STREAM_S ... VIDEO_STREAM_E:
-				pes_start = 1;
-				break;
-
-			default:
-				break;
-		}
-
-	while (c < length) {
-		memset(obuf, 0, TS_SIZE);
-		if (length - c >= (TS_SIZE - 4)){
-			l = write_ts_header2(pid, counter, pes_start,
-					     obuf, (TS_SIZE - 4));
-			memcpy(obuf + l, buf + c, TS_SIZE - l);
-			c += TS_SIZE - l;
-		} else {
-			l = write_ts_header2(pid, counter, pes_start,
-					     obuf, length - c);
-			memcpy(obuf + l, buf + c, TS_SIZE - l);
-			c = length;
-		}
-		feed->cb.ts(obuf, 188, NULL, 0, &feed->feed.ts, DMX_OK);
-		pes_start = 0;
-	}
-}
-
-
-static int write_ts_to_decoder(struct av7110 *av7110, int type, const u8 *buf, size_t len)
-{
-	struct ipack *ipack = &av7110->ipack[type];
-
-	if (buf[1] & TRANS_ERROR) {
-		av7110_ipack_reset(ipack);
-		return -1;
-	}
-
-	if (!(buf[3] & PAYLOAD))
-		return -1;
-
-	if (buf[1] & PAY_START)
-		av7110_ipack_flush(ipack);
-
-	if (buf[3] & ADAPT_FIELD) {
-		len -= buf[4] + 1;
-		buf += buf[4] + 1;
-		if (!len)
-			return 0;
-	}
-
-	av7110_ipack_instant_repack(buf + 4, len - 4, ipack);
-	return 0;
-}
-
-
-int av7110_write_to_decoder(struct dvb_demux_feed *feed, const u8 *buf, size_t len)
-{
-	struct dvb_demux *demux = feed->demux;
-	struct av7110 *av7110 = (struct av7110 *) demux->priv;
-
-	dprintk(2, "av7110:%p, \n", av7110);
-
-	if (av7110->full_ts && demux->dmx.frontend->source != DMX_MEMORY_FE)
-		return 0;
-
-	switch (feed->pes_type) {
-	case 0:
-		if (av7110->audiostate.stream_source == AUDIO_SOURCE_MEMORY)
-			return -EINVAL;
-		break;
-	case 1:
-		if (av7110->videostate.stream_source == VIDEO_SOURCE_MEMORY)
-			return -EINVAL;
-		break;
-	default:
-		return -1;
-	}
-
-	return write_ts_to_decoder(av7110, feed->pes_type, buf, len);
-}
-
-
-
-/******************************************************************************
- * Video MPEG decoder events
- ******************************************************************************/
-void dvb_video_add_event(struct av7110 *av7110, struct video_event *event)
-{
-	struct dvb_video_events *events = &av7110->video_events;
-	int wp;
-
-	spin_lock_bh(&events->lock);
-
-	wp = (events->eventw + 1) % MAX_VIDEO_EVENT;
-	if (wp == events->eventr) {
-		events->overflow = 1;
-		events->eventr = (events->eventr + 1) % MAX_VIDEO_EVENT;
-	}
-
-	//FIXME: timestamp?
-	memcpy(&events->events[events->eventw], event, sizeof(struct video_event));
-	events->eventw = wp;
-
-	spin_unlock_bh(&events->lock);
-
-	wake_up_interruptible(&events->wait_queue);
-}
-
-
-static int dvb_video_get_event (struct av7110 *av7110, struct video_event *event, int flags)
-{
-	struct dvb_video_events *events = &av7110->video_events;
-
-	if (events->overflow) {
-		events->overflow = 0;
-		return -EOVERFLOW;
-	}
-	if (events->eventw == events->eventr) {
-		int ret;
-
-		if (flags & O_NONBLOCK)
-			return -EWOULDBLOCK;
-
-		ret = wait_event_interruptible(events->wait_queue,
-					       events->eventw != events->eventr);
-		if (ret < 0)
-			return ret;
-	}
-
-	spin_lock_bh(&events->lock);
-
-	memcpy(event, &events->events[events->eventr],
-	       sizeof(struct video_event));
-	events->eventr = (events->eventr + 1) % MAX_VIDEO_EVENT;
-
-	spin_unlock_bh(&events->lock);
-
-	return 0;
-}
-
-
-/******************************************************************************
- * DVB device file operations
- ******************************************************************************/
-
-static unsigned int dvb_video_poll(struct file *file, poll_table *wait)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct av7110 *av7110 = dvbdev->priv;
-	unsigned int mask = 0;
-
-	dprintk(2, "av7110:%p, \n", av7110);
-
-	if ((file->f_flags & O_ACCMODE) != O_RDONLY)
-		poll_wait(file, &av7110->avout.queue, wait);
-
-	poll_wait(file, &av7110->video_events.wait_queue, wait);
-
-	if (av7110->video_events.eventw != av7110->video_events.eventr)
-		mask = POLLPRI;
-
-	if ((file->f_flags & O_ACCMODE) != O_RDONLY) {
-		if (av7110->playing) {
-			if (FREE_COND)
-				mask |= (POLLOUT | POLLWRNORM);
-			} else /* if not playing: may play if asked for */
-				mask |= (POLLOUT | POLLWRNORM);
-	}
-
-	return mask;
-}
-
-static ssize_t dvb_video_write(struct file *file, const char __user *buf,
-			       size_t count, loff_t *ppos)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct av7110 *av7110 = dvbdev->priv;
-	unsigned char c;
-
-	dprintk(2, "av7110:%p, \n", av7110);
-
-	if ((file->f_flags & O_ACCMODE) == O_RDONLY)
-		return -EPERM;
-
-	if (av7110->videostate.stream_source != VIDEO_SOURCE_MEMORY)
-		return -EPERM;
-
-	if (get_user(c, buf))
-		return -EFAULT;
-	if (c == 0x47 && count % TS_SIZE == 0)
-		return ts_play(av7110, buf, count, file->f_flags & O_NONBLOCK, 1);
-	else
-		return dvb_play(av7110, buf, count, file->f_flags & O_NONBLOCK, 1);
-}
-
-static unsigned int dvb_audio_poll(struct file *file, poll_table *wait)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct av7110 *av7110 = dvbdev->priv;
-	unsigned int mask = 0;
-
-	dprintk(2, "av7110:%p, \n", av7110);
-
-	poll_wait(file, &av7110->aout.queue, wait);
-
-	if (av7110->playing) {
-		if (dvb_ringbuffer_free(&av7110->aout) >= 20 * 1024)
-			mask |= (POLLOUT | POLLWRNORM);
-	} else /* if not playing: may play if asked for */
-		mask = (POLLOUT | POLLWRNORM);
-
-	return mask;
-}
-
-static ssize_t dvb_audio_write(struct file *file, const char __user *buf,
-			       size_t count, loff_t *ppos)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct av7110 *av7110 = dvbdev->priv;
-	unsigned char c;
-
-	dprintk(2, "av7110:%p, \n", av7110);
-
-	if (av7110->audiostate.stream_source != AUDIO_SOURCE_MEMORY) {
-		printk(KERN_ERR "not audio source memory\n");
-		return -EPERM;
-	}
-
-	if (get_user(c, buf))
-		return -EFAULT;
-	if (c == 0x47 && count % TS_SIZE == 0)
-		return ts_play(av7110, buf, count, file->f_flags & O_NONBLOCK, 0);
-	else
-		return dvb_aplay(av7110, buf, count, file->f_flags & O_NONBLOCK, 0);
-}
-
-static u8 iframe_header[] = { 0x00, 0x00, 0x01, 0xe0, 0x00, 0x00, 0x80, 0x00, 0x00 };
-
-#define MIN_IFRAME 400000
-
-static int play_iframe(struct av7110 *av7110, char __user *buf, unsigned int len, int nonblock)
-{
-	unsigned i, n;
-	int progressive = 0;
-	int match = 0;
-
-	dprintk(2, "av7110:%p, \n", av7110);
-
-	if (!(av7110->playing & RP_VIDEO)) {
-		if (av7110_av_start_play(av7110, RP_VIDEO) < 0)
-			return -EBUSY;
-	}
-
-	/* search in buf for instances of 00 00 01 b5 1? */
-	for (i = 0; i < len; i++) {
-		unsigned char c;
-		if (get_user(c, buf + i))
-			return -EFAULT;
-		if (match == 5) {
-			progressive = c & 0x08;
-			match = 0;
-		}
-		if (c == 0x00) {
-			match = (match == 1 || match == 2) ? 2 : 1;
-			continue;
-		}
-		switch (match++) {
-		case 2: if (c == 0x01)
-				continue;
-			break;
-		case 3: if (c == 0xb5)
-				continue;
-			break;
-		case 4: if ((c & 0xf0) == 0x10)
-				continue;
-			break;
-		}
-		match = 0;
-	}
-
-	/* setting n always > 1, fixes problems when playing stillframes
-	   consisting of I- and P-Frames */
-	n = MIN_IFRAME / len + 1;
-
-	/* FIXME: nonblock? */
-	dvb_play_kernel(av7110, iframe_header, sizeof(iframe_header), 0, 1);
-
-	for (i = 0; i < n; i++)
-		dvb_play(av7110, buf, len, 0, 1);
-
-	av7110_ipack_flush(&av7110->ipack[1]);
-
-	if (progressive)
-		return vidcom(av7110, AV_VIDEO_CMD_FREEZE, 1);
-	else
-		return 0;
-}
-
-
-static int dvb_video_ioctl(struct file *file,
-			   unsigned int cmd, void *parg)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct av7110 *av7110 = dvbdev->priv;
-	unsigned long arg = (unsigned long) parg;
-	int ret = 0;
-
-	dprintk(1, "av7110:%p, cmd=%04x\n", av7110,cmd);
-
-	if ((file->f_flags & O_ACCMODE) == O_RDONLY) {
-		if ( cmd != VIDEO_GET_STATUS && cmd != VIDEO_GET_EVENT &&
-		     cmd != VIDEO_GET_SIZE ) {
-			return -EPERM;
-		}
-	}
-
-	switch (cmd) {
-	case VIDEO_STOP:
-		av7110->videostate.play_state = VIDEO_STOPPED;
-		if (av7110->videostate.stream_source == VIDEO_SOURCE_MEMORY)
-			ret = av7110_av_stop(av7110, RP_VIDEO);
-		else
-			ret = vidcom(av7110, AV_VIDEO_CMD_STOP,
-			       av7110->videostate.video_blank ? 0 : 1);
-		if (!ret)
-			av7110->trickmode = TRICK_NONE;
-		break;
-
-	case VIDEO_PLAY:
-		av7110->trickmode = TRICK_NONE;
-		if (av7110->videostate.play_state == VIDEO_FREEZED) {
-			av7110->videostate.play_state = VIDEO_PLAYING;
-			ret = vidcom(av7110, AV_VIDEO_CMD_PLAY, 0);
-			if (ret)
-				break;
-		}
-		if (av7110->videostate.stream_source == VIDEO_SOURCE_MEMORY) {
-			if (av7110->playing == RP_AV) {
-				ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Stop, 0);
-				if (ret)
-					break;
-				av7110->playing &= ~RP_VIDEO;
-			}
-			ret = av7110_av_start_play(av7110, RP_VIDEO);
-		}
-		if (!ret)
-			ret = vidcom(av7110, AV_VIDEO_CMD_PLAY, 0);
-		if (!ret)
-			av7110->videostate.play_state = VIDEO_PLAYING;
-		break;
-
-	case VIDEO_FREEZE:
-		av7110->videostate.play_state = VIDEO_FREEZED;
-		if (av7110->playing & RP_VIDEO)
-			ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Pause, 0);
-		else
-			ret = vidcom(av7110, AV_VIDEO_CMD_FREEZE, 1);
-		if (!ret)
-			av7110->trickmode = TRICK_FREEZE;
-		break;
-
-	case VIDEO_CONTINUE:
-		if (av7110->playing & RP_VIDEO)
-			ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Continue, 0);
-		if (!ret)
-			ret = vidcom(av7110, AV_VIDEO_CMD_PLAY, 0);
-		if (!ret) {
-			av7110->videostate.play_state = VIDEO_PLAYING;
-			av7110->trickmode = TRICK_NONE;
-		}
-		break;
-
-	case VIDEO_SELECT_SOURCE:
-		av7110->videostate.stream_source = (video_stream_source_t) arg;
-		break;
-
-	case VIDEO_SET_BLANK:
-		av7110->videostate.video_blank = (int) arg;
-		break;
-
-	case VIDEO_GET_STATUS:
-		memcpy(parg, &av7110->videostate, sizeof(struct video_status));
-		break;
-
-	case VIDEO_GET_EVENT:
-		ret = dvb_video_get_event(av7110, parg, file->f_flags);
-		break;
-
-	case VIDEO_GET_SIZE:
-		memcpy(parg, &av7110->video_size, sizeof(video_size_t));
-		break;
-
-	case VIDEO_SET_DISPLAY_FORMAT:
-	{
-		video_displayformat_t format = (video_displayformat_t) arg;
-		switch (format) {
-		case VIDEO_PAN_SCAN:
-			av7110->display_panscan = VID_PAN_SCAN_PREF;
-			break;
-		case VIDEO_LETTER_BOX:
-			av7110->display_panscan = VID_VC_AND_PS_PREF;
-			break;
-		case VIDEO_CENTER_CUT_OUT:
-			av7110->display_panscan = VID_CENTRE_CUT_PREF;
-			break;
-		default:
-			ret = -EINVAL;
-		}
-		if (ret < 0)
-			break;
-		av7110->videostate.display_format = format;
-		ret = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetPanScanType,
-				    1, av7110->display_panscan);
-		break;
-	}
-
-	case VIDEO_SET_FORMAT:
-		if (arg > 1) {
-			ret = -EINVAL;
-			break;
-		}
-		av7110->display_ar = arg;
-		ret = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetMonitorType,
-				    1, (u16) arg);
-		break;
-
-	case VIDEO_STILLPICTURE:
-	{
-		struct video_still_picture *pic =
-			(struct video_still_picture *) parg;
-		av7110->videostate.stream_source = VIDEO_SOURCE_MEMORY;
-		dvb_ringbuffer_flush_spinlock_wakeup(&av7110->avout);
-		ret = play_iframe(av7110, pic->iFrame, pic->size,
-				  file->f_flags & O_NONBLOCK);
-		break;
-	}
-
-	case VIDEO_FAST_FORWARD:
-		//note: arg is ignored by firmware
-		if (av7110->playing & RP_VIDEO)
-			ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY,
-					    __Scan_I, 2, AV_PES, 0);
-		else
-			ret = vidcom(av7110, AV_VIDEO_CMD_FFWD, arg);
-		if (!ret) {
-			av7110->trickmode = TRICK_FAST;
-			av7110->videostate.play_state = VIDEO_PLAYING;
-		}
-		break;
-
-	case VIDEO_SLOWMOTION:
-		if (av7110->playing&RP_VIDEO) {
-			if (av7110->trickmode != TRICK_SLOW)
-				ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Slow, 2, 0, 0);
-			if (!ret)
-				ret = vidcom(av7110, AV_VIDEO_CMD_SLOW, arg);
-		} else {
-			ret = vidcom(av7110, AV_VIDEO_CMD_PLAY, 0);
-			if (!ret)
-				ret = vidcom(av7110, AV_VIDEO_CMD_STOP, 0);
-			if (!ret)
-				ret = vidcom(av7110, AV_VIDEO_CMD_SLOW, arg);
-		}
-		if (!ret) {
-			av7110->trickmode = TRICK_SLOW;
-			av7110->videostate.play_state = VIDEO_PLAYING;
-		}
-		break;
-
-	case VIDEO_GET_CAPABILITIES:
-		*(int *)parg = VIDEO_CAP_MPEG1 | VIDEO_CAP_MPEG2 |
-			VIDEO_CAP_SYS | VIDEO_CAP_PROG;
-		break;
-
-	case VIDEO_CLEAR_BUFFER:
-		dvb_ringbuffer_flush_spinlock_wakeup(&av7110->avout);
-		av7110_ipack_reset(&av7110->ipack[1]);
-		if (av7110->playing == RP_AV) {
-			ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY,
-					    __Play, 2, AV_PES, 0);
-			if (ret)
-				break;
-			if (av7110->trickmode == TRICK_FAST)
-				ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY,
-						    __Scan_I, 2, AV_PES, 0);
-			if (av7110->trickmode == TRICK_SLOW) {
-				ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY,
-						    __Slow, 2, 0, 0);
-				if (!ret)
-					ret = vidcom(av7110, AV_VIDEO_CMD_SLOW, arg);
-			}
-			if (av7110->trickmode == TRICK_FREEZE)
-				ret = vidcom(av7110, AV_VIDEO_CMD_STOP, 1);
-		}
-		break;
-
-	case VIDEO_SET_STREAMTYPE:
-		break;
-
-	default:
-		ret = -ENOIOCTLCMD;
-		break;
-	}
-
-	return ret;
-}
-
-static int dvb_audio_ioctl(struct file *file,
-			   unsigned int cmd, void *parg)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct av7110 *av7110 = dvbdev->priv;
-	unsigned long arg = (unsigned long) parg;
-	int ret = 0;
-
-	dprintk(1, "av7110:%p, cmd=%04x\n", av7110,cmd);
-
-	if (((file->f_flags & O_ACCMODE) == O_RDONLY) &&
-	    (cmd != AUDIO_GET_STATUS))
-		return -EPERM;
-
-	switch (cmd) {
-	case AUDIO_STOP:
-		if (av7110->audiostate.stream_source == AUDIO_SOURCE_MEMORY)
-			ret = av7110_av_stop(av7110, RP_AUDIO);
-		else
-			ret = audcom(av7110, AUDIO_CMD_MUTE);
-		if (!ret)
-			av7110->audiostate.play_state = AUDIO_STOPPED;
-		break;
-
-	case AUDIO_PLAY:
-		if (av7110->audiostate.stream_source == AUDIO_SOURCE_MEMORY)
-			ret = av7110_av_start_play(av7110, RP_AUDIO);
-		if (!ret)
-			ret = audcom(av7110, AUDIO_CMD_UNMUTE);
-		if (!ret)
-			av7110->audiostate.play_state = AUDIO_PLAYING;
-		break;
-
-	case AUDIO_PAUSE:
-		ret = audcom(av7110, AUDIO_CMD_MUTE);
-		if (!ret)
-			av7110->audiostate.play_state = AUDIO_PAUSED;
-		break;
-
-	case AUDIO_CONTINUE:
-		if (av7110->audiostate.play_state == AUDIO_PAUSED) {
-			av7110->audiostate.play_state = AUDIO_PLAYING;
-			ret = audcom(av7110, AUDIO_CMD_UNMUTE | AUDIO_CMD_PCM16);
-		}
-		break;
-
-	case AUDIO_SELECT_SOURCE:
-		av7110->audiostate.stream_source = (audio_stream_source_t) arg;
-		break;
-
-	case AUDIO_SET_MUTE:
-	{
-		ret = audcom(av7110, arg ? AUDIO_CMD_MUTE : AUDIO_CMD_UNMUTE);
-		if (!ret)
-			av7110->audiostate.mute_state = (int) arg;
-		break;
-	}
-
-	case AUDIO_SET_AV_SYNC:
-		av7110->audiostate.AV_sync_state = (int) arg;
-		ret = audcom(av7110, arg ? AUDIO_CMD_SYNC_ON : AUDIO_CMD_SYNC_OFF);
-		break;
-
-	case AUDIO_SET_BYPASS_MODE:
-		if (FW_VERSION(av7110->arm_app) < 0x2621)
-			ret = -EINVAL;
-		av7110->audiostate.bypass_mode = (int)arg;
-		break;
-
-	case AUDIO_CHANNEL_SELECT:
-		av7110->audiostate.channel_select = (audio_channel_select_t) arg;
-		switch(av7110->audiostate.channel_select) {
-		case AUDIO_STEREO:
-			ret = audcom(av7110, AUDIO_CMD_STEREO);
-			if (!ret) {
-				if (av7110->adac_type == DVB_ADAC_CRYSTAL)
-					i2c_writereg(av7110, 0x20, 0x02, 0x49);
-				else if (av7110->adac_type == DVB_ADAC_MSP34x5)
-					msp_writereg(av7110, MSP_WR_DSP, 0x0008, 0x0220);
-			}
-			break;
-		case AUDIO_MONO_LEFT:
-			ret = audcom(av7110, AUDIO_CMD_MONO_L);
-			if (!ret) {
-				if (av7110->adac_type == DVB_ADAC_CRYSTAL)
-					i2c_writereg(av7110, 0x20, 0x02, 0x4a);
-				else if (av7110->adac_type == DVB_ADAC_MSP34x5)
-					msp_writereg(av7110, MSP_WR_DSP, 0x0008, 0x0200);
-			}
-			break;
-		case AUDIO_MONO_RIGHT:
-			ret = audcom(av7110, AUDIO_CMD_MONO_R);
-			if (!ret) {
-				if (av7110->adac_type == DVB_ADAC_CRYSTAL)
-					i2c_writereg(av7110, 0x20, 0x02, 0x45);
-				else if (av7110->adac_type == DVB_ADAC_MSP34x5)
-					msp_writereg(av7110, MSP_WR_DSP, 0x0008, 0x0210);
-			}
-			break;
-		default:
-			ret = -EINVAL;
-			break;
-		}
-		break;
-
-	case AUDIO_GET_STATUS:
-		memcpy(parg, &av7110->audiostate, sizeof(struct audio_status));
-		break;
-
-	case AUDIO_GET_CAPABILITIES:
-		if (FW_VERSION(av7110->arm_app) < 0x2621)
-			*(unsigned int *)parg = AUDIO_CAP_LPCM | AUDIO_CAP_MP1 | AUDIO_CAP_MP2;
-		else
-			*(unsigned int *)parg = AUDIO_CAP_LPCM | AUDIO_CAP_DTS | AUDIO_CAP_AC3 |
-						AUDIO_CAP_MP1 | AUDIO_CAP_MP2;
-		break;
-
-	case AUDIO_CLEAR_BUFFER:
-		dvb_ringbuffer_flush_spinlock_wakeup(&av7110->aout);
-		av7110_ipack_reset(&av7110->ipack[0]);
-		if (av7110->playing == RP_AV)
-			ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY,
-					    __Play, 2, AV_PES, 0);
-		break;
-
-	case AUDIO_SET_ID:
-		break;
-
-	case AUDIO_SET_MIXER:
-	{
-		struct audio_mixer *amix = (struct audio_mixer *)parg;
-		ret = av7110_set_volume(av7110, amix->volume_left, amix->volume_right);
-		break;
-	}
-
-	case AUDIO_SET_STREAMTYPE:
-		break;
-
-	default:
-		ret = -ENOIOCTLCMD;
-	}
-
-	return ret;
-}
-
-
-static int dvb_video_open(struct inode *inode, struct file *file)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct av7110 *av7110 = dvbdev->priv;
-	int err;
-
-	dprintk(2, "av7110:%p, \n", av7110);
-
-	if ((err = dvb_generic_open(inode, file)) < 0)
-		return err;
-
-	if ((file->f_flags & O_ACCMODE) != O_RDONLY) {
-		dvb_ringbuffer_flush_spinlock_wakeup(&av7110->aout);
-		dvb_ringbuffer_flush_spinlock_wakeup(&av7110->avout);
-		av7110->video_blank = 1;
-		av7110->audiostate.AV_sync_state = 1;
-		av7110->videostate.stream_source = VIDEO_SOURCE_DEMUX;
-
-		/*  empty event queue */
-		av7110->video_events.eventr = av7110->video_events.eventw = 0;
-	}
-
-	return 0;
-}
-
-static int dvb_video_release(struct inode *inode, struct file *file)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct av7110 *av7110 = dvbdev->priv;
-
-	dprintk(2, "av7110:%p, \n", av7110);
-
-	if ((file->f_flags & O_ACCMODE) != O_RDONLY) {
-		av7110_av_stop(av7110, RP_VIDEO);
-	}
-
-	return dvb_generic_release(inode, file);
-}
-
-static int dvb_audio_open(struct inode *inode, struct file *file)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct av7110 *av7110 = dvbdev->priv;
-	int err = dvb_generic_open(inode, file);
-
-	dprintk(2, "av7110:%p, \n", av7110);
-
-	if (err < 0)
-		return err;
-	dvb_ringbuffer_flush_spinlock_wakeup(&av7110->aout);
-	av7110->audiostate.stream_source = AUDIO_SOURCE_DEMUX;
-	return 0;
-}
-
-static int dvb_audio_release(struct inode *inode, struct file *file)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct av7110 *av7110 = dvbdev->priv;
-
-	dprintk(2, "av7110:%p, \n", av7110);
-
-	av7110_av_stop(av7110, RP_AUDIO);
-	return dvb_generic_release(inode, file);
-}
-
-
-
-/******************************************************************************
- * driver registration
- ******************************************************************************/
-
-static const struct file_operations dvb_video_fops = {
-	.owner		= THIS_MODULE,
-	.write		= dvb_video_write,
-	.unlocked_ioctl	= dvb_generic_ioctl,
-	.open		= dvb_video_open,
-	.release	= dvb_video_release,
-	.poll		= dvb_video_poll,
-	.llseek		= noop_llseek,
-};
-
-static struct dvb_device dvbdev_video = {
-	.priv		= NULL,
-	.users		= 6,
-	.readers	= 5,	/* arbitrary */
-	.writers	= 1,
-	.fops		= &dvb_video_fops,
-	.kernel_ioctl	= dvb_video_ioctl,
-};
-
-static const struct file_operations dvb_audio_fops = {
-	.owner		= THIS_MODULE,
-	.write		= dvb_audio_write,
-	.unlocked_ioctl	= dvb_generic_ioctl,
-	.open		= dvb_audio_open,
-	.release	= dvb_audio_release,
-	.poll		= dvb_audio_poll,
-	.llseek		= noop_llseek,
-};
-
-static struct dvb_device dvbdev_audio = {
-	.priv		= NULL,
-	.users		= 1,
-	.writers	= 1,
-	.fops		= &dvb_audio_fops,
-	.kernel_ioctl	= dvb_audio_ioctl,
-};
-
-
-int av7110_av_register(struct av7110 *av7110)
-{
-	av7110->audiostate.AV_sync_state = 0;
-	av7110->audiostate.mute_state = 0;
-	av7110->audiostate.play_state = AUDIO_STOPPED;
-	av7110->audiostate.stream_source = AUDIO_SOURCE_DEMUX;
-	av7110->audiostate.channel_select = AUDIO_STEREO;
-	av7110->audiostate.bypass_mode = 0;
-
-	av7110->videostate.video_blank = 0;
-	av7110->videostate.play_state = VIDEO_STOPPED;
-	av7110->videostate.stream_source = VIDEO_SOURCE_DEMUX;
-	av7110->videostate.video_format = VIDEO_FORMAT_4_3;
-	av7110->videostate.display_format = VIDEO_LETTER_BOX;
-	av7110->display_ar = VIDEO_FORMAT_4_3;
-	av7110->display_panscan = VID_VC_AND_PS_PREF;
-
-	init_waitqueue_head(&av7110->video_events.wait_queue);
-	spin_lock_init(&av7110->video_events.lock);
-	av7110->video_events.eventw = av7110->video_events.eventr = 0;
-	av7110->video_events.overflow = 0;
-	memset(&av7110->video_size, 0, sizeof (video_size_t));
-
-	dvb_register_device(&av7110->dvb_adapter, &av7110->video_dev,
-			    &dvbdev_video, av7110, DVB_DEVICE_VIDEO);
-
-	dvb_register_device(&av7110->dvb_adapter, &av7110->audio_dev,
-			    &dvbdev_audio, av7110, DVB_DEVICE_AUDIO);
-
-	return 0;
-}
-
-void av7110_av_unregister(struct av7110 *av7110)
-{
-	dvb_unregister_device(av7110->audio_dev);
-	dvb_unregister_device(av7110->video_dev);
-}
-
-int av7110_av_init(struct av7110 *av7110)
-{
-	void (*play[])(u8 *, int, void *) = { play_audio_cb, play_video_cb };
-	int i, ret;
-
-	for (i = 0; i < 2; i++) {
-		struct ipack *ipack = av7110->ipack + i;
-
-		ret = av7110_ipack_init(ipack, IPACKS, play[i]);
-		if (ret < 0) {
-			if (i)
-				av7110_ipack_free(--ipack);
-			goto out;
-		}
-		ipack->data = av7110;
-	}
-
-	dvb_ringbuffer_init(&av7110->avout, av7110->iobuf, AVOUTLEN);
-	dvb_ringbuffer_init(&av7110->aout, av7110->iobuf + AVOUTLEN, AOUTLEN);
-
-	av7110->kbuf[0] = (u8 *)(av7110->iobuf + AVOUTLEN + AOUTLEN + BMPLEN);
-	av7110->kbuf[1] = av7110->kbuf[0] + 2 * IPACKS;
-out:
-	return ret;
-}
-
-void av7110_av_exit(struct av7110 *av7110)
-{
-	av7110_ipack_free(&av7110->ipack[0]);
-	av7110_ipack_free(&av7110->ipack[1]);
-}
diff --git a/drivers/media/dvb/ttpci/av7110_av.h b/drivers/media/dvb/ttpci/av7110_av.h
deleted file mode 100644
index 5f02ef8..0000000
--- a/drivers/media/dvb/ttpci/av7110_av.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef _AV7110_AV_H_
-#define _AV7110_AV_H_
-
-struct av7110;
-
-extern int av7110_set_vidmode(struct av7110 *av7110,
-			      enum av7110_video_mode mode);
-
-extern int av7110_record_cb(struct dvb_filter_pes2ts *p2t, u8 *buf, size_t len);
-extern int av7110_pes_play(void *dest, struct dvb_ringbuffer *buf, int dlen);
-extern int av7110_write_to_decoder(struct dvb_demux_feed *feed, const u8 *buf, size_t len);
-
-extern int av7110_set_volume(struct av7110 *av7110, int volleft, int volright);
-extern int av7110_av_stop(struct av7110 *av7110, int av);
-extern int av7110_av_start_record(struct av7110 *av7110, int av,
-			  struct dvb_demux_feed *dvbdmxfeed);
-extern int av7110_av_start_play(struct av7110 *av7110, int av);
-
-extern void dvb_video_add_event(struct av7110 *av7110, struct video_event *event);
-
-extern void av7110_p2t_init(struct av7110_p2t *p, struct dvb_demux_feed *feed);
-extern void av7110_p2t_write(u8 const *buf, long int length, u16 pid, struct av7110_p2t *p);
-
-extern int av7110_av_register(struct av7110 *av7110);
-extern void av7110_av_unregister(struct av7110 *av7110);
-extern int av7110_av_init(struct av7110 *av7110);
-extern void av7110_av_exit(struct av7110 *av7110);
-
-
-#endif /* _AV7110_AV_H_ */
diff --git a/drivers/media/dvb/ttpci/av7110_ca.c b/drivers/media/dvb/ttpci/av7110_ca.c
deleted file mode 100644
index 9fc1dd0..0000000
--- a/drivers/media/dvb/ttpci/av7110_ca.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * av7110_ca.c: CA and CI stuff
- *
- * Copyright (C) 1999-2002 Ralph  Metzler
- *                       & Marcus Metzler for convergence integrated media GmbH
- *
- * originally based on code by:
- * Copyright (C) 1998,1999 Christian Theiss <mistert@rz.fh-augsburg.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org/ 
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/fs.h>
-#include <linux/timer.h>
-#include <linux/poll.h>
-#include <linux/gfp.h>
-
-#include "av7110.h"
-#include "av7110_hw.h"
-#include "av7110_ca.h"
-
-
-void CI_handle(struct av7110 *av7110, u8 *data, u16 len)
-{
-	dprintk(8, "av7110:%p\n",av7110);
-
-	if (len < 3)
-		return;
-	switch (data[0]) {
-	case CI_MSG_CI_INFO:
-		if (data[2] != 1 && data[2] != 2)
-			break;
-		switch (data[1]) {
-		case 0:
-			av7110->ci_slot[data[2] - 1].flags = 0;
-			break;
-		case 1:
-			av7110->ci_slot[data[2] - 1].flags |= CA_CI_MODULE_PRESENT;
-			break;
-		case 2:
-			av7110->ci_slot[data[2] - 1].flags |= CA_CI_MODULE_READY;
-			break;
-		}
-		break;
-	case CI_SWITCH_PRG_REPLY:
-		//av7110->ci_stat=data[1];
-		break;
-	default:
-		break;
-	}
-}
-
-
-void ci_get_data(struct dvb_ringbuffer *cibuf, u8 *data, int len)
-{
-	if (dvb_ringbuffer_free(cibuf) < len + 2)
-		return;
-
-	DVB_RINGBUFFER_WRITE_BYTE(cibuf, len >> 8);
-	DVB_RINGBUFFER_WRITE_BYTE(cibuf, len & 0xff);
-	dvb_ringbuffer_write(cibuf, data, len);
-	wake_up_interruptible(&cibuf->queue);
-}
-
-
-/******************************************************************************
- * CI link layer file ops
- ******************************************************************************/
-
-static int ci_ll_init(struct dvb_ringbuffer *cirbuf, struct dvb_ringbuffer *ciwbuf, int size)
-{
-	struct dvb_ringbuffer *tab[] = { cirbuf, ciwbuf, NULL }, **p;
-	void *data;
-
-	for (p = tab; *p; p++) {
-		data = vmalloc(size);
-		if (!data) {
-			while (p-- != tab) {
-				vfree(p[0]->data);
-				p[0]->data = NULL;
-			}
-			return -ENOMEM;
-		}
-		dvb_ringbuffer_init(*p, data, size);
-	}
-	return 0;
-}
-
-static void ci_ll_flush(struct dvb_ringbuffer *cirbuf, struct dvb_ringbuffer *ciwbuf)
-{
-	dvb_ringbuffer_flush_spinlock_wakeup(cirbuf);
-	dvb_ringbuffer_flush_spinlock_wakeup(ciwbuf);
-}
-
-static void ci_ll_release(struct dvb_ringbuffer *cirbuf, struct dvb_ringbuffer *ciwbuf)
-{
-	vfree(cirbuf->data);
-	cirbuf->data = NULL;
-	vfree(ciwbuf->data);
-	ciwbuf->data = NULL;
-}
-
-static int ci_ll_reset(struct dvb_ringbuffer *cibuf, struct file *file,
-		       int slots, ca_slot_info_t *slot)
-{
-	int i;
-	int len = 0;
-	u8 msg[8] = { 0x00, 0x06, 0x00, 0x00, 0xff, 0x02, 0x00, 0x00 };
-
-	for (i = 0; i < 2; i++) {
-		if (slots & (1 << i))
-			len += 8;
-	}
-
-	if (dvb_ringbuffer_free(cibuf) < len)
-		return -EBUSY;
-
-	for (i = 0; i < 2; i++) {
-		if (slots & (1 << i)) {
-			msg[2] = i;
-			dvb_ringbuffer_write(cibuf, msg, 8);
-			slot[i].flags = 0;
-		}
-	}
-
-	return 0;
-}
-
-static ssize_t ci_ll_write(struct dvb_ringbuffer *cibuf, struct file *file,
-			   const char __user *buf, size_t count, loff_t *ppos)
-{
-	int free;
-	int non_blocking = file->f_flags & O_NONBLOCK;
-	u8 *page = (u8 *)__get_free_page(GFP_USER);
-	int res;
-
-	if (!page)
-		return -ENOMEM;
-
-	res = -EINVAL;
-	if (count > 2048)
-		goto out;
-
-	res = -EFAULT;
-	if (copy_from_user(page, buf, count))
-		goto out;
-
-	free = dvb_ringbuffer_free(cibuf);
-	if (count + 2 > free) {
-		res = -EWOULDBLOCK;
-		if (non_blocking)
-			goto out;
-		res = -ERESTARTSYS;
-		if (wait_event_interruptible(cibuf->queue,
-					     (dvb_ringbuffer_free(cibuf) >= count + 2)))
-			goto out;
-	}
-
-	DVB_RINGBUFFER_WRITE_BYTE(cibuf, count >> 8);
-	DVB_RINGBUFFER_WRITE_BYTE(cibuf, count & 0xff);
-
-	res = dvb_ringbuffer_write(cibuf, page, count);
-out:
-	free_page((unsigned long)page);
-	return res;
-}
-
-static ssize_t ci_ll_read(struct dvb_ringbuffer *cibuf, struct file *file,
-			  char __user *buf, size_t count, loff_t *ppos)
-{
-	int avail;
-	int non_blocking = file->f_flags & O_NONBLOCK;
-	ssize_t len;
-
-	if (!cibuf->data || !count)
-		return 0;
-	if (non_blocking && (dvb_ringbuffer_empty(cibuf)))
-		return -EWOULDBLOCK;
-	if (wait_event_interruptible(cibuf->queue,
-				     !dvb_ringbuffer_empty(cibuf)))
-		return -ERESTARTSYS;
-	avail = dvb_ringbuffer_avail(cibuf);
-	if (avail < 4)
-		return 0;
-	len = DVB_RINGBUFFER_PEEK(cibuf, 0) << 8;
-	len |= DVB_RINGBUFFER_PEEK(cibuf, 1);
-	if (avail < len + 2 || count < len)
-		return -EINVAL;
-	DVB_RINGBUFFER_SKIP(cibuf, 2);
-
-	return dvb_ringbuffer_read_user(cibuf, buf, len);
-}
-
-static int dvb_ca_open(struct inode *inode, struct file *file)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct av7110 *av7110 = dvbdev->priv;
-	int err = dvb_generic_open(inode, file);
-
-	dprintk(8, "av7110:%p\n",av7110);
-
-	if (err < 0)
-		return err;
-	ci_ll_flush(&av7110->ci_rbuffer, &av7110->ci_wbuffer);
-	return 0;
-}
-
-static unsigned int dvb_ca_poll (struct file *file, poll_table *wait)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct av7110 *av7110 = dvbdev->priv;
-	struct dvb_ringbuffer *rbuf = &av7110->ci_rbuffer;
-	struct dvb_ringbuffer *wbuf = &av7110->ci_wbuffer;
-	unsigned int mask = 0;
-
-	dprintk(8, "av7110:%p\n",av7110);
-
-	poll_wait(file, &rbuf->queue, wait);
-	poll_wait(file, &wbuf->queue, wait);
-
-	if (!dvb_ringbuffer_empty(rbuf))
-		mask |= (POLLIN | POLLRDNORM);
-
-	if (dvb_ringbuffer_free(wbuf) > 1024)
-		mask |= (POLLOUT | POLLWRNORM);
-
-	return mask;
-}
-
-static int dvb_ca_ioctl(struct file *file, unsigned int cmd, void *parg)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct av7110 *av7110 = dvbdev->priv;
-	unsigned long arg = (unsigned long) parg;
-
-	dprintk(8, "av7110:%p\n",av7110);
-
-	switch (cmd) {
-	case CA_RESET:
-		return ci_ll_reset(&av7110->ci_wbuffer, file, arg, &av7110->ci_slot[0]);
-		break;
-	case CA_GET_CAP:
-	{
-		ca_caps_t cap;
-
-		cap.slot_num = 2;
-		cap.slot_type = (FW_CI_LL_SUPPORT(av7110->arm_app) ?
-				 CA_CI_LINK : CA_CI) | CA_DESCR;
-		cap.descr_num = 16;
-		cap.descr_type = CA_ECD;
-		memcpy(parg, &cap, sizeof(cap));
-		break;
-	}
-
-	case CA_GET_SLOT_INFO:
-	{
-		ca_slot_info_t *info=(ca_slot_info_t *)parg;
-
-		if (info->num < 0 || info->num > 1)
-			return -EINVAL;
-		av7110->ci_slot[info->num].num = info->num;
-		av7110->ci_slot[info->num].type = FW_CI_LL_SUPPORT(av7110->arm_app) ?
-							CA_CI_LINK : CA_CI;
-		memcpy(info, &av7110->ci_slot[info->num], sizeof(ca_slot_info_t));
-		break;
-	}
-
-	case CA_GET_MSG:
-		break;
-
-	case CA_SEND_MSG:
-		break;
-
-	case CA_GET_DESCR_INFO:
-	{
-		ca_descr_info_t info;
-
-		info.num = 16;
-		info.type = CA_ECD;
-		memcpy(parg, &info, sizeof (info));
-		break;
-	}
-
-	case CA_SET_DESCR:
-	{
-		ca_descr_t *descr = (ca_descr_t*) parg;
-
-		if (descr->index >= 16)
-			return -EINVAL;
-		if (descr->parity > 1)
-			return -EINVAL;
-		av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, SetDescr, 5,
-			      (descr->index<<8)|descr->parity,
-			      (descr->cw[0]<<8)|descr->cw[1],
-			      (descr->cw[2]<<8)|descr->cw[3],
-			      (descr->cw[4]<<8)|descr->cw[5],
-			      (descr->cw[6]<<8)|descr->cw[7]);
-		break;
-	}
-
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static ssize_t dvb_ca_write(struct file *file, const char __user *buf,
-			    size_t count, loff_t *ppos)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct av7110 *av7110 = dvbdev->priv;
-
-	dprintk(8, "av7110:%p\n",av7110);
-	return ci_ll_write(&av7110->ci_wbuffer, file, buf, count, ppos);
-}
-
-static ssize_t dvb_ca_read(struct file *file, char __user *buf,
-			   size_t count, loff_t *ppos)
-{
-	struct dvb_device *dvbdev = file->private_data;
-	struct av7110 *av7110 = dvbdev->priv;
-
-	dprintk(8, "av7110:%p\n",av7110);
-	return ci_ll_read(&av7110->ci_rbuffer, file, buf, count, ppos);
-}
-
-static const struct file_operations dvb_ca_fops = {
-	.owner		= THIS_MODULE,
-	.read		= dvb_ca_read,
-	.write		= dvb_ca_write,
-	.unlocked_ioctl	= dvb_generic_ioctl,
-	.open		= dvb_ca_open,
-	.release	= dvb_generic_release,
-	.poll		= dvb_ca_poll,
-	.llseek		= default_llseek,
-};
-
-static struct dvb_device dvbdev_ca = {
-	.priv		= NULL,
-	.users		= 1,
-	.writers	= 1,
-	.fops		= &dvb_ca_fops,
-	.kernel_ioctl	= dvb_ca_ioctl,
-};
-
-
-int av7110_ca_register(struct av7110 *av7110)
-{
-	return dvb_register_device(&av7110->dvb_adapter, &av7110->ca_dev,
-				   &dvbdev_ca, av7110, DVB_DEVICE_CA);
-}
-
-void av7110_ca_unregister(struct av7110 *av7110)
-{
-	dvb_unregister_device(av7110->ca_dev);
-}
-
-int av7110_ca_init(struct av7110* av7110)
-{
-	return ci_ll_init(&av7110->ci_rbuffer, &av7110->ci_wbuffer, 8192);
-}
-
-void av7110_ca_exit(struct av7110* av7110)
-{
-	ci_ll_release(&av7110->ci_rbuffer, &av7110->ci_wbuffer);
-}
diff --git a/drivers/media/dvb/ttpci/av7110_ca.h b/drivers/media/dvb/ttpci/av7110_ca.h
deleted file mode 100644
index 70ee855..0000000
--- a/drivers/media/dvb/ttpci/av7110_ca.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _AV7110_CA_H_
-#define _AV7110_CA_H_
-
-struct av7110;
-
-extern void CI_handle(struct av7110 *av7110, u8 *data, u16 len);
-extern void ci_get_data(struct dvb_ringbuffer *cibuf, u8 *data, int len);
-
-extern int av7110_ca_register(struct av7110 *av7110);
-extern void av7110_ca_unregister(struct av7110 *av7110);
-extern int av7110_ca_init(struct av7110* av7110);
-extern void av7110_ca_exit(struct av7110* av7110);
-
-#endif /* _AV7110_CA_H_ */
diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c
deleted file mode 100644
index f1cbfe5..0000000
--- a/drivers/media/dvb/ttpci/av7110_hw.c
+++ /dev/null
@@ -1,1208 +0,0 @@
-/*
- * av7110_hw.c: av7110 low level hardware access and firmware interface
- *
- * Copyright (C) 1999-2002 Ralph  Metzler
- *                       & Marcus Metzler for convergence integrated media GmbH
- *
- * originally based on code by:
- * Copyright (C) 1998,1999 Christian Theiss <mistert@rz.fh-augsburg.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- * the project's page is at http://www.linuxtv.org/ 
- */
-
-/* for debugging ARM communication: */
-//#define COM_DEBUG
-
-#include <stdarg.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/fs.h>
-
-#include "av7110.h"
-#include "av7110_hw.h"
-
-#define _NOHANDSHAKE
-
-/****************************************************************************
- * DEBI functions
- ****************************************************************************/
-
-/* This DEBI code is based on the Stradis driver
-   by Nathan Laredo <laredo@gnu.org> */
-
-int av7110_debiwrite(struct av7110 *av7110, u32 config,
-		     int addr, u32 val, int count)
-{
-	struct saa7146_dev *dev = av7110->dev;
-
-	if (count <= 0 || count > 32764) {
-		printk("%s: invalid count %d\n", __func__, count);
-		return -1;
-	}
-	if (saa7146_wait_for_debi_done(av7110->dev, 0) < 0) {
-		printk("%s: wait_for_debi_done failed\n", __func__);
-		return -1;
-	}
-	saa7146_write(dev, DEBI_CONFIG, config);
-	if (count <= 4)		/* immediate transfer */
-		saa7146_write(dev, DEBI_AD, val);
-	else			/* block transfer */
-		saa7146_write(dev, DEBI_AD, av7110->debi_bus);
-	saa7146_write(dev, DEBI_COMMAND, (count << 17) | (addr & 0xffff));
-	saa7146_write(dev, MC2, (2 << 16) | 2);
-	return 0;
-}
-
-u32 av7110_debiread(struct av7110 *av7110, u32 config, int addr, int count)
-{
-	struct saa7146_dev *dev = av7110->dev;
-	u32 result = 0;
-
-	if (count > 32764 || count <= 0) {
-		printk("%s: invalid count %d\n", __func__, count);
-		return 0;
-	}
-	if (saa7146_wait_for_debi_done(av7110->dev, 0) < 0) {
-		printk("%s: wait_for_debi_done #1 failed\n", __func__);
-		return 0;
-	}
-	saa7146_write(dev, DEBI_AD, av7110->debi_bus);
-	saa7146_write(dev, DEBI_COMMAND, (count << 17) | 0x10000 | (addr & 0xffff));
-
-	saa7146_write(dev, DEBI_CONFIG, config);
-	saa7146_write(dev, MC2, (2 << 16) | 2);
-	if (count > 4)
-		return count;
-	if (saa7146_wait_for_debi_done(av7110->dev, 0) < 0) {
-		printk("%s: wait_for_debi_done #2 failed\n", __func__);
-		return 0;
-	}
-
-	result = saa7146_read(dev, DEBI_AD);
-	result &= (0xffffffffUL >> ((4 - count) * 8));
-	return result;
-}
-
-
-
-/* av7110 ARM core boot stuff */
-#if 0
-void av7110_reset_arm(struct av7110 *av7110)
-{
-	saa7146_setgpio(av7110->dev, RESET_LINE, SAA7146_GPIO_OUTLO);
-
-	/* Disable DEBI and GPIO irq */
-	SAA7146_IER_DISABLE(av7110->dev, MASK_19 | MASK_03);
-	SAA7146_ISR_CLEAR(av7110->dev, MASK_19 | MASK_03);
-
-	saa7146_setgpio(av7110->dev, RESET_LINE, SAA7146_GPIO_OUTHI);
-	msleep(30);	/* the firmware needs some time to initialize */
-
-	ARM_ResetMailBox(av7110);
-
-	SAA7146_ISR_CLEAR(av7110->dev, MASK_19 | MASK_03);
-	SAA7146_IER_ENABLE(av7110->dev, MASK_03);
-
-	av7110->arm_ready = 1;
-	dprintk(1, "reset ARM\n");
-}
-#endif  /*  0  */
-
-static int waitdebi(struct av7110 *av7110, int adr, int state)
-{
-	int k;
-
-	dprintk(4, "%p\n", av7110);
-
-	for (k = 0; k < 100; k++) {
-		if (irdebi(av7110, DEBINOSWAP, adr, 0, 2) == state)
-			return 0;
-		udelay(5);
-	}
-	return -ETIMEDOUT;
-}
-
-static int load_dram(struct av7110 *av7110, u32 *data, int len)
-{
-	int i;
-	int blocks, rest;
-	u32 base, bootblock = AV7110_BOOT_BLOCK;
-
-	dprintk(4, "%p\n", av7110);
-
-	blocks = len / AV7110_BOOT_MAX_SIZE;
-	rest = len % AV7110_BOOT_MAX_SIZE;
-	base = DRAM_START_CODE;
-
-	for (i = 0; i < blocks; i++) {
-		if (waitdebi(av7110, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_EMPTY) < 0) {
-			printk(KERN_ERR "dvb-ttpci: load_dram(): timeout at block %d\n", i);
-			return -ETIMEDOUT;
-		}
-		dprintk(4, "writing DRAM block %d\n", i);
-		mwdebi(av7110, DEBISWAB, bootblock,
-		       ((u8 *)data) + i * AV7110_BOOT_MAX_SIZE, AV7110_BOOT_MAX_SIZE);
-		bootblock ^= 0x1400;
-		iwdebi(av7110, DEBISWAB, AV7110_BOOT_BASE, swab32(base), 4);
-		iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_SIZE, AV7110_BOOT_MAX_SIZE, 2);
-		iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2);
-		base += AV7110_BOOT_MAX_SIZE;
-	}
-
-	if (rest > 0) {
-		if (waitdebi(av7110, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_EMPTY) < 0) {
-			printk(KERN_ERR "dvb-ttpci: load_dram(): timeout at last block\n");
-			return -ETIMEDOUT;
-		}
-		if (rest > 4)
-			mwdebi(av7110, DEBISWAB, bootblock,
-			       ((u8 *)data) + i * AV7110_BOOT_MAX_SIZE, rest);
-		else
-			mwdebi(av7110, DEBISWAB, bootblock,
-			       ((u8 *)data) + i * AV7110_BOOT_MAX_SIZE - 4, rest + 4);
-
-		iwdebi(av7110, DEBISWAB, AV7110_BOOT_BASE, swab32(base), 4);
-		iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_SIZE, rest, 2);
-		iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2);
-	}
-	if (waitdebi(av7110, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_EMPTY) < 0) {
-		printk(KERN_ERR "dvb-ttpci: load_dram(): timeout after last block\n");
-		return -ETIMEDOUT;
-	}
-	iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_SIZE, 0, 2);
-	iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2);
-	if (waitdebi(av7110, AV7110_BOOT_STATE, BOOTSTATE_AV7110_BOOT_COMPLETE) < 0) {
-		printk(KERN_ERR "dvb-ttpci: load_dram(): final handshake timeout\n");
-		return -ETIMEDOUT;
-	}
-	return 0;
-}
-
-
-/* we cannot write av7110 DRAM directly, so load a bootloader into
- * the DPRAM which implements a simple boot protocol */
-int av7110_bootarm(struct av7110 *av7110)
-{
-	const struct firmware *fw;
-	const char *fw_name = "av7110/bootcode.bin";
-	struct saa7146_dev *dev = av7110->dev;
-	u32 ret;
-	int i;
-
-	dprintk(4, "%p\n", av7110);
-
-	av7110->arm_ready = 0;
-
-	saa7146_setgpio(dev, RESET_LINE, SAA7146_GPIO_OUTLO);
-
-	/* Disable DEBI and GPIO irq */
-	SAA7146_IER_DISABLE(av7110->dev, MASK_03 | MASK_19);
-	SAA7146_ISR_CLEAR(av7110->dev, MASK_19 | MASK_03);
-
-	/* enable DEBI */
-	saa7146_write(av7110->dev, MC1, 0x08800880);
-	saa7146_write(av7110->dev, DD1_STREAM_B, 0x00000000);
-	saa7146_write(av7110->dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
-
-	/* test DEBI */
-	iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4);
-	/* FIXME: Why does Nexus CA require 2x iwdebi for first init? */
-	iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4);
-
-	if ((ret=irdebi(av7110, DEBINOSWAP, DPRAM_BASE, 0, 4)) != 0x10325476) {
-		printk(KERN_ERR "dvb-ttpci: debi test in av7110_bootarm() failed: "
-		       "%08x != %08x (check your BIOS 'Plug&Play OS' settings)\n",
-		       ret, 0x10325476);
-		return -1;
-	}
-	for (i = 0; i < 8192; i += 4)
-		iwdebi(av7110, DEBISWAP, DPRAM_BASE + i, 0x00, 4);
-	dprintk(2, "debi test OK\n");
-
-	/* boot */
-	dprintk(1, "load boot code\n");
-	saa7146_setgpio(dev, ARM_IRQ_LINE, SAA7146_GPIO_IRQLO);
-	//saa7146_setgpio(dev, DEBI_DONE_LINE, SAA7146_GPIO_INPUT);
-	//saa7146_setgpio(dev, 3, SAA7146_GPIO_INPUT);
-
-	ret = request_firmware(&fw, fw_name, &dev->pci->dev);
-	if (ret) {
-		printk(KERN_ERR "dvb-ttpci: Failed to load firmware \"%s\"\n",
-			fw_name);
-		return ret;
-	}
-
-	mwdebi(av7110, DEBISWAB, DPRAM_BASE, fw->data, fw->size);
-	release_firmware(fw);
-	iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2);
-
-	if (saa7146_wait_for_debi_done(av7110->dev, 1)) {
-		printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): "
-		       "saa7146_wait_for_debi_done() timed out\n");
-		return -ETIMEDOUT;
-	}
-	saa7146_setgpio(dev, RESET_LINE, SAA7146_GPIO_OUTHI);
-	mdelay(1);
-
-	dprintk(1, "load dram code\n");
-	if (load_dram(av7110, (u32 *)av7110->bin_root, av7110->size_root) < 0) {
-		printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): "
-		       "load_dram() failed\n");
-		return -1;
-	}
-
-	saa7146_setgpio(dev, RESET_LINE, SAA7146_GPIO_OUTLO);
-	mdelay(1);
-
-	dprintk(1, "load dpram code\n");
-	mwdebi(av7110, DEBISWAB, DPRAM_BASE, av7110->bin_dpram, av7110->size_dpram);
-
-	if (saa7146_wait_for_debi_done(av7110->dev, 1)) {
-		printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): "
-		       "saa7146_wait_for_debi_done() timed out after loading DRAM\n");
-		return -ETIMEDOUT;
-	}
-	saa7146_setgpio(dev, RESET_LINE, SAA7146_GPIO_OUTHI);
-	msleep(30);	/* the firmware needs some time to initialize */
-
-	//ARM_ClearIrq(av7110);
-	ARM_ResetMailBox(av7110);
-	SAA7146_ISR_CLEAR(av7110->dev, MASK_19 | MASK_03);
-	SAA7146_IER_ENABLE(av7110->dev, MASK_03);
-
-	av7110->arm_errors = 0;
-	av7110->arm_ready = 1;
-	return 0;
-}
-MODULE_FIRMWARE("av7110/bootcode.bin");
-
-/****************************************************************************
- * DEBI command polling
- ****************************************************************************/
-
-int av7110_wait_msgstate(struct av7110 *av7110, u16 flags)
-{
-	unsigned long start;
-	u32 stat;
-	int err;
-
-	if (FW_VERSION(av7110->arm_app) <= 0x261c) {
-		/* not supported by old firmware */
-		msleep(50);
-		return 0;
-	}
-
-	/* new firmware */
-	start = jiffies;
-	for (;;) {
-		err = time_after(jiffies, start + ARM_WAIT_FREE);
-		if (mutex_lock_interruptible(&av7110->dcomlock))
-			return -ERESTARTSYS;
-		stat = rdebi(av7110, DEBINOSWAP, MSGSTATE, 0, 2);
-		mutex_unlock(&av7110->dcomlock);
-		if ((stat & flags) == 0)
-			break;
-		if (err) {
-			printk(KERN_ERR "%s: timeout waiting for MSGSTATE %04x\n",
-				__func__, stat & flags);
-			return -ETIMEDOUT;
-		}
-		msleep(1);
-	}
-	return 0;
-}
-
-static int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length)
-{
-	int i;
-	unsigned long start;
-	char *type = NULL;
-	u16 flags[2] = {0, 0};
-	u32 stat;
-	int err;
-
-//	dprintk(4, "%p\n", av7110);
-
-	if (!av7110->arm_ready) {
-		dprintk(1, "arm not ready.\n");
-		return -ENXIO;
-	}
-
-	start = jiffies;
-	while (1) {
-		err = time_after(jiffies, start + ARM_WAIT_FREE);
-		if (rdebi(av7110, DEBINOSWAP, COMMAND, 0, 2) == 0)
-			break;
-		if (err) {
-			printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for COMMAND idle\n", __func__);
-			av7110->arm_errors++;
-			return -ETIMEDOUT;
-		}
-		msleep(1);
-	}
-
-	if (FW_VERSION(av7110->arm_app) <= 0x261f)
-		wdebi(av7110, DEBINOSWAP, COM_IF_LOCK, 0xffff, 2);
-
-#ifndef _NOHANDSHAKE
-	start = jiffies;
-	while (1) {
-		err = time_after(jiffies, start + ARM_WAIT_SHAKE);
-		if (rdebi(av7110, DEBINOSWAP, HANDSHAKE_REG, 0, 2) == 0)
-			break;
-		if (err) {
-			printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for HANDSHAKE_REG\n", __func__);
-			return -ETIMEDOUT;
-		}
-		msleep(1);
-	}
-#endif
-
-	switch ((buf[0] >> 8) & 0xff) {
-	case COMTYPE_PIDFILTER:
-	case COMTYPE_ENCODER:
-	case COMTYPE_REC_PLAY:
-	case COMTYPE_MPEGDECODER:
-		type = "MSG";
-		flags[0] = GPMQOver;
-		flags[1] = GPMQFull;
-		break;
-	case COMTYPE_OSD:
-		type = "OSD";
-		flags[0] = OSDQOver;
-		flags[1] = OSDQFull;
-		break;
-	case COMTYPE_MISC:
-		if (FW_VERSION(av7110->arm_app) >= 0x261d) {
-			type = "MSG";
-			flags[0] = GPMQOver;
-			flags[1] = GPMQBusy;
-		}
-		break;
-	default:
-		break;
-	}
-
-	if (type != NULL) {
-		/* non-immediate COMMAND type */
-		start = jiffies;
-		for (;;) {
-			err = time_after(jiffies, start + ARM_WAIT_FREE);
-			stat = rdebi(av7110, DEBINOSWAP, MSGSTATE, 0, 2);
-			if (stat & flags[0]) {
-				printk(KERN_ERR "%s: %s QUEUE overflow\n",
-					__func__, type);
-				return -1;
-			}
-			if ((stat & flags[1]) == 0)
-				break;
-			if (err) {
-				printk(KERN_ERR "%s: timeout waiting on busy %s QUEUE\n",
-					__func__, type);
-				av7110->arm_errors++;
-				return -ETIMEDOUT;
-			}
-			msleep(1);
-		}
-	}
-
-	for (i = 2; i < length; i++)
-		wdebi(av7110, DEBINOSWAP, COMMAND + 2 * i, (u32) buf[i], 2);
-
-	if (length)
-		wdebi(av7110, DEBINOSWAP, COMMAND + 2, (u32) buf[1], 2);
-	else
-		wdebi(av7110, DEBINOSWAP, COMMAND + 2, 0, 2);
-
-	wdebi(av7110, DEBINOSWAP, COMMAND, (u32) buf[0], 2);
-
-	if (FW_VERSION(av7110->arm_app) <= 0x261f)
-		wdebi(av7110, DEBINOSWAP, COM_IF_LOCK, 0x0000, 2);
-
-#ifdef COM_DEBUG
-	start = jiffies;
-	while (1) {
-		err = time_after(jiffies, start + ARM_WAIT_FREE);
-		if (rdebi(av7110, DEBINOSWAP, COMMAND, 0, 2) == 0)
-			break;
-		if (err) {
-			printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for COMMAND %d to complete\n",
-			       __func__, (buf[0] >> 8) & 0xff);
-			return -ETIMEDOUT;
-		}
-		msleep(1);
-	}
-
-	stat = rdebi(av7110, DEBINOSWAP, MSGSTATE, 0, 2);
-	if (stat & GPMQOver) {
-		printk(KERN_ERR "dvb-ttpci: %s(): GPMQOver\n", __func__);
-		return -ENOSPC;
-	}
-	else if (stat & OSDQOver) {
-		printk(KERN_ERR "dvb-ttpci: %s(): OSDQOver\n", __func__);
-		return -ENOSPC;
-	}
-#endif
-
-	return 0;
-}
-
-static int av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length)
-{
-	int ret;
-
-//	dprintk(4, "%p\n", av7110);
-
-	if (!av7110->arm_ready) {
-		dprintk(1, "arm not ready.\n");
-		return -1;
-	}
-	if (mutex_lock_interruptible(&av7110->dcomlock))
-		return -ERESTARTSYS;
-
-	ret = __av7110_send_fw_cmd(av7110, buf, length);
-	mutex_unlock(&av7110->dcomlock);
-	if (ret && ret!=-ERESTARTSYS)
-		printk(KERN_ERR "dvb-ttpci: %s(): av7110_send_fw_cmd error %d\n",
-		       __func__, ret);
-	return ret;
-}
-
-int av7110_fw_cmd(struct av7110 *av7110, int type, int com, int num, ...)
-{
-	va_list args;
-	u16 buf[num + 2];
-	int i, ret;
-
-//	dprintk(4, "%p\n", av7110);
-
-	buf[0] = ((type << 8) | com);
-	buf[1] = num;
-
-	if (num) {
-		va_start(args, num);
-		for (i = 0; i < num; i++)
-			buf[i + 2] = va_arg(args, u32);
-		va_end(args);
-	}
-
-	ret = av7110_send_fw_cmd(av7110, buf, num + 2);
-	if (ret && ret != -ERESTARTSYS)
-		printk(KERN_ERR "dvb-ttpci: av7110_fw_cmd error %d\n", ret);
-	return ret;
-}
-
-#if 0
-int av7110_send_ci_cmd(struct av7110 *av7110, u8 subcom, u8 *buf, u8 len)
-{
-	int i, ret;
-	u16 cmd[18] = { ((COMTYPE_COMMON_IF << 8) + subcom),
-		16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
-
-	dprintk(4, "%p\n", av7110);
-
-	for(i = 0; i < len && i < 32; i++)
-	{
-		if(i % 2 == 0)
-			cmd[(i / 2) + 2] = (u16)(buf[i]) << 8;
-		else
-			cmd[(i / 2) + 2] |= buf[i];
-	}
-
-	ret = av7110_send_fw_cmd(av7110, cmd, 18);
-	if (ret && ret != -ERESTARTSYS)
-		printk(KERN_ERR "dvb-ttpci: av7110_send_ci_cmd error %d\n", ret);
-	return ret;
-}
-#endif  /*  0  */
-
-int av7110_fw_request(struct av7110 *av7110, u16 *request_buf,
-		      int request_buf_len, u16 *reply_buf, int reply_buf_len)
-{
-	int err;
-	s16 i;
-	unsigned long start;
-#ifdef COM_DEBUG
-	u32 stat;
-#endif
-
-	dprintk(4, "%p\n", av7110);
-
-	if (!av7110->arm_ready) {
-		dprintk(1, "arm not ready.\n");
-		return -1;
-	}
-
-	if (mutex_lock_interruptible(&av7110->dcomlock))
-		return -ERESTARTSYS;
-
-	if ((err = __av7110_send_fw_cmd(av7110, request_buf, request_buf_len)) < 0) {
-		mutex_unlock(&av7110->dcomlock);
-		printk(KERN_ERR "dvb-ttpci: av7110_fw_request error %d\n", err);
-		return err;
-	}
-
-	start = jiffies;
-	while (1) {
-		err = time_after(jiffies, start + ARM_WAIT_FREE);
-		if (rdebi(av7110, DEBINOSWAP, COMMAND, 0, 2) == 0)
-			break;
-		if (err) {
-			printk(KERN_ERR "%s: timeout waiting for COMMAND to complete\n", __func__);
-			mutex_unlock(&av7110->dcomlock);
-			return -ETIMEDOUT;
-		}
-#ifdef _NOHANDSHAKE
-		msleep(1);
-#endif
-	}
-
-#ifndef _NOHANDSHAKE
-	start = jiffies;
-	while (1) {
-		err = time_after(jiffies, start + ARM_WAIT_SHAKE);
-		if (rdebi(av7110, DEBINOSWAP, HANDSHAKE_REG, 0, 2) == 0)
-			break;
-		if (err) {
-			printk(KERN_ERR "%s: timeout waiting for HANDSHAKE_REG\n", __func__);
-			mutex_unlock(&av7110->dcomlock);
-			return -ETIMEDOUT;
-		}
-		msleep(1);
-	}
-#endif
-
-#ifdef COM_DEBUG
-	stat = rdebi(av7110, DEBINOSWAP, MSGSTATE, 0, 2);
-	if (stat & GPMQOver) {
-		printk(KERN_ERR "%s: GPMQOver\n", __func__);
-		mutex_unlock(&av7110->dcomlock);
-		return -1;
-	}
-	else if (stat & OSDQOver) {
-		printk(KERN_ERR "%s: OSDQOver\n", __func__);
-		mutex_unlock(&av7110->dcomlock);
-		return -1;
-	}
-#endif
-
-	for (i = 0; i < reply_buf_len; i++)
-		reply_buf[i] = rdebi(av7110, DEBINOSWAP, COM_BUFF + 2 * i, 0, 2);
-
-	mutex_unlock(&av7110->dcomlock);
-	return 0;
-}
-
-static int av7110_fw_query(struct av7110 *av7110, u16 tag, u16* buf, s16 length)
-{
-	int ret;
-	ret = av7110_fw_request(av7110, &tag, 0, buf, length);
-	if (ret)
-		printk(KERN_ERR "dvb-ttpci: av7110_fw_query error %d\n", ret);
-	return ret;
-}
-
-
-/****************************************************************************
- * Firmware commands
- ****************************************************************************/
-
-/* get version of the firmware ROM, RTSL, video ucode and ARM application  */
-int av7110_firmversion(struct av7110 *av7110)
-{
-	u16 buf[20];
-	u16 tag = ((COMTYPE_REQUEST << 8) + ReqVersion);
-
-	dprintk(4, "%p\n", av7110);
-
-	if (av7110_fw_query(av7110, tag, buf, 16)) {
-		printk("dvb-ttpci: failed to boot firmware @ card %d\n",
-		       av7110->dvb_adapter.num);
-		return -EIO;
-	}
-
-	av7110->arm_fw = (buf[0] << 16) + buf[1];
-	av7110->arm_rtsl = (buf[2] << 16) + buf[3];
-	av7110->arm_vid = (buf[4] << 16) + buf[5];
-	av7110->arm_app = (buf[6] << 16) + buf[7];
-	av7110->avtype = (buf[8] << 16) + buf[9];
-
-	printk("dvb-ttpci: info @ card %d: firm %08x, rtsl %08x, vid %08x, app %08x\n",
-	       av7110->dvb_adapter.num, av7110->arm_fw,
-	       av7110->arm_rtsl, av7110->arm_vid, av7110->arm_app);
-
-	/* print firmware capabilities */
-	if (FW_CI_LL_SUPPORT(av7110->arm_app))
-		printk("dvb-ttpci: firmware @ card %d supports CI link layer interface\n",
-		       av7110->dvb_adapter.num);
-	else
-		printk("dvb-ttpci: no firmware support for CI link layer interface @ card %d\n",
-		       av7110->dvb_adapter.num);
-
-	return 0;
-}
-
-
-int av7110_diseqc_send(struct av7110 *av7110, int len, u8 *msg, unsigned long burst)
-{
-	int i, ret;
-	u16 buf[18] = { ((COMTYPE_AUDIODAC << 8) + SendDiSEqC),
-			16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
-
-	dprintk(4, "%p\n", av7110);
-
-	if (len > 10)
-		len = 10;
-
-	buf[1] = len + 2;
-	buf[2] = len;
-
-	if (burst != -1)
-		buf[3] = burst ? 0x01 : 0x00;
-	else
-		buf[3] = 0xffff;
-
-	for (i = 0; i < len; i++)
-		buf[i + 4] = msg[i];
-
-	ret = av7110_send_fw_cmd(av7110, buf, 18);
-	if (ret && ret!=-ERESTARTSYS)
-		printk(KERN_ERR "dvb-ttpci: av7110_diseqc_send error %d\n", ret);
-	return ret;
-}
-
-
-#ifdef CONFIG_DVB_AV7110_OSD
-
-static inline int SetColorBlend(struct av7110 *av7110, u8 windownr)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_OSD, SetCBlend, 1, windownr);
-}
-
-static inline int SetBlend_(struct av7110 *av7110, u8 windownr,
-		     enum av7110_osd_palette_type colordepth, u16 index, u8 blending)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_OSD, SetBlend, 4,
-			     windownr, colordepth, index, blending);
-}
-
-static inline int SetColor_(struct av7110 *av7110, u8 windownr,
-		     enum av7110_osd_palette_type colordepth, u16 index, u16 colorhi, u16 colorlo)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_OSD, SetColor, 5,
-			     windownr, colordepth, index, colorhi, colorlo);
-}
-
-static inline int SetFont(struct av7110 *av7110, u8 windownr, u8 fontsize,
-			  u16 colorfg, u16 colorbg)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_OSD, Set_Font, 4,
-			     windownr, fontsize, colorfg, colorbg);
-}
-
-static int FlushText(struct av7110 *av7110)
-{
-	unsigned long start;
-	int err;
-
-	if (mutex_lock_interruptible(&av7110->dcomlock))
-		return -ERESTARTSYS;
-	start = jiffies;
-	while (1) {
-		err = time_after(jiffies, start + ARM_WAIT_OSD);
-		if (rdebi(av7110, DEBINOSWAP, BUFF1_BASE, 0, 2) == 0)
-			break;
-		if (err) {
-			printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for BUFF1_BASE == 0\n",
-			       __func__);
-			mutex_unlock(&av7110->dcomlock);
-			return -ETIMEDOUT;
-		}
-		msleep(1);
-	}
-	mutex_unlock(&av7110->dcomlock);
-	return 0;
-}
-
-static int WriteText(struct av7110 *av7110, u8 win, u16 x, u16 y, char *buf)
-{
-	int i, ret;
-	unsigned long start;
-	int length = strlen(buf) + 1;
-	u16 cbuf[5] = { (COMTYPE_OSD << 8) + DText, 3, win, x, y };
-
-	if (mutex_lock_interruptible(&av7110->dcomlock))
-		return -ERESTARTSYS;
-
-	start = jiffies;
-	while (1) {
-		ret = time_after(jiffies, start + ARM_WAIT_OSD);
-		if (rdebi(av7110, DEBINOSWAP, BUFF1_BASE, 0, 2) == 0)
-			break;
-		if (ret) {
-			printk(KERN_ERR "dvb-ttpci: %s: timeout waiting for BUFF1_BASE == 0\n",
-			       __func__);
-			mutex_unlock(&av7110->dcomlock);
-			return -ETIMEDOUT;
-		}
-		msleep(1);
-	}
-#ifndef _NOHANDSHAKE
-	start = jiffies;
-	while (1) {
-		ret = time_after(jiffies, start + ARM_WAIT_SHAKE);
-		if (rdebi(av7110, DEBINOSWAP, HANDSHAKE_REG, 0, 2) == 0)
-			break;
-		if (ret) {
-			printk(KERN_ERR "dvb-ttpci: %s: timeout waiting for HANDSHAKE_REG\n",
-			       __func__);
-			mutex_unlock(&av7110->dcomlock);
-			return -ETIMEDOUT;
-		}
-		msleep(1);
-	}
-#endif
-	for (i = 0; i < length / 2; i++)
-		wdebi(av7110, DEBINOSWAP, BUFF1_BASE + i * 2,
-		      swab16(*(u16 *)(buf + 2 * i)), 2);
-	if (length & 1)
-		wdebi(av7110, DEBINOSWAP, BUFF1_BASE + i * 2, 0, 2);
-	ret = __av7110_send_fw_cmd(av7110, cbuf, 5);
-	mutex_unlock(&av7110->dcomlock);
-	if (ret && ret!=-ERESTARTSYS)
-		printk(KERN_ERR "dvb-ttpci: WriteText error %d\n", ret);
-	return ret;
-}
-
-static inline int DrawLine(struct av7110 *av7110, u8 windownr,
-			   u16 x, u16 y, u16 dx, u16 dy, u16 color)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_OSD, DLine, 6,
-			     windownr, x, y, dx, dy, color);
-}
-
-static inline int DrawBlock(struct av7110 *av7110, u8 windownr,
-			    u16 x, u16 y, u16 dx, u16 dy, u16 color)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_OSD, DBox, 6,
-			     windownr, x, y, dx, dy, color);
-}
-
-static inline int HideWindow(struct av7110 *av7110, u8 windownr)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_OSD, WHide, 1, windownr);
-}
-
-static inline int MoveWindowRel(struct av7110 *av7110, u8 windownr, u16 x, u16 y)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_OSD, WMoveD, 3, windownr, x, y);
-}
-
-static inline int MoveWindowAbs(struct av7110 *av7110, u8 windownr, u16 x, u16 y)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_OSD, WMoveA, 3, windownr, x, y);
-}
-
-static inline int DestroyOSDWindow(struct av7110 *av7110, u8 windownr)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_OSD, WDestroy, 1, windownr);
-}
-
-static inline int CreateOSDWindow(struct av7110 *av7110, u8 windownr,
-				  osd_raw_window_t disptype,
-				  u16 width, u16 height)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_OSD, WCreate, 4,
-			     windownr, disptype, width, height);
-}
-
-
-static enum av7110_osd_palette_type bpp2pal[8] = {
-	Pal1Bit, Pal2Bit, 0, Pal4Bit, 0, 0, 0, Pal8Bit
-};
-static osd_raw_window_t bpp2bit[8] = {
-	OSD_BITMAP1, OSD_BITMAP2, 0, OSD_BITMAP4, 0, 0, 0, OSD_BITMAP8
-};
-
-static inline int WaitUntilBmpLoaded(struct av7110 *av7110)
-{
-	int ret = wait_event_timeout(av7110->bmpq,
-				av7110->bmp_state != BMP_LOADING, 10*HZ);
-	if (ret == 0) {
-		printk("dvb-ttpci: warning: timeout waiting in LoadBitmap: %d, %d\n",
-		       ret, av7110->bmp_state);
-		av7110->bmp_state = BMP_NONE;
-		return -ETIMEDOUT;
-	}
-	return 0;
-}
-
-static inline int LoadBitmap(struct av7110 *av7110,
-			     u16 dx, u16 dy, int inc, u8 __user * data)
-{
-	u16 format;
-	int bpp;
-	int i;
-	int d, delta;
-	u8 c;
-	int ret;
-
-	dprintk(4, "%p\n", av7110);
-
-	format = bpp2bit[av7110->osdbpp[av7110->osdwin]];
-
-	av7110->bmp_state = BMP_LOADING;
-	if	(format == OSD_BITMAP8) {
-		bpp=8; delta = 1;
-	} else if (format == OSD_BITMAP4) {
-		bpp=4; delta = 2;
-	} else if (format == OSD_BITMAP2) {
-		bpp=2; delta = 4;
-	} else if (format == OSD_BITMAP1) {
-		bpp=1; delta = 8;
-	} else {
-		av7110->bmp_state = BMP_NONE;
-		return -EINVAL;
-	}
-	av7110->bmplen = ((dx * dy * bpp + 7) & ~7) / 8;
-	av7110->bmpp = 0;
-	if (av7110->bmplen > 32768) {
-		av7110->bmp_state = BMP_NONE;
-		return -EINVAL;
-	}
-	for (i = 0; i < dy; i++) {
-		if (copy_from_user(av7110->bmpbuf + 1024 + i * dx, data + i * inc, dx)) {
-			av7110->bmp_state = BMP_NONE;
-			return -EINVAL;
-		}
-	}
-	if (format != OSD_BITMAP8) {
-		for (i = 0; i < dx * dy / delta; i++) {
-			c = ((u8 *)av7110->bmpbuf)[1024 + i * delta + delta - 1];
-			for (d = delta - 2; d >= 0; d--) {
-				c |= (((u8 *)av7110->bmpbuf)[1024 + i * delta + d]
-				      << ((delta - d - 1) * bpp));
-				((u8 *)av7110->bmpbuf)[1024 + i] = c;
-			}
-		}
-	}
-	av7110->bmplen += 1024;
-	dprintk(4, "av7110_fw_cmd: LoadBmp size %d\n", av7110->bmplen);
-	ret = av7110_fw_cmd(av7110, COMTYPE_OSD, LoadBmp, 3, format, dx, dy);
-	if (!ret)
-		ret = WaitUntilBmpLoaded(av7110);
-	return ret;
-}
-
-static int BlitBitmap(struct av7110 *av7110, u16 x, u16 y)
-{
-	dprintk(4, "%p\n", av7110);
-
-	return av7110_fw_cmd(av7110, COMTYPE_OSD, BlitBmp, 4, av7110->osdwin, x, y, 0);
-}
-
-static inline int ReleaseBitmap(struct av7110 *av7110)
-{
-	dprintk(4, "%p\n", av7110);
-
-	if (av7110->bmp_state != BMP_LOADED && FW_VERSION(av7110->arm_app) < 0x261e)
-		return -1;
-	if (av7110->bmp_state == BMP_LOADING)
-		dprintk(1,"ReleaseBitmap called while BMP_LOADING\n");
-	av7110->bmp_state = BMP_NONE;
-	return av7110_fw_cmd(av7110, COMTYPE_OSD, ReleaseBmp, 0);
-}
-
-static u32 RGB2YUV(u16 R, u16 G, u16 B)
-{
-	u16 y, u, v;
-	u16 Y, Cr, Cb;
-
-	y = R * 77 + G * 150 + B * 29;	/* Luma=0.299R+0.587G+0.114B 0..65535 */
-	u = 2048 + B * 8 -(y >> 5);	/* Cr 0..4095 */
-	v = 2048 + R * 8 -(y >> 5);	/* Cb 0..4095 */
-
-	Y = y / 256;
-	Cb = u / 16;
-	Cr = v / 16;
-
-	return Cr | (Cb << 16) | (Y << 8);
-}
-
-static int OSDSetColor(struct av7110 *av7110, u8 color, u8 r, u8 g, u8 b, u8 blend)
-{
-	int ret;
-
-	u16 ch, cl;
-	u32 yuv;
-
-	yuv = blend ? RGB2YUV(r,g,b) : 0;
-	cl = (yuv & 0xffff);
-	ch = ((yuv >> 16) & 0xffff);
-	ret = SetColor_(av7110, av7110->osdwin, bpp2pal[av7110->osdbpp[av7110->osdwin]],
-			color, ch, cl);
-	if (!ret)
-		ret = SetBlend_(av7110, av7110->osdwin, bpp2pal[av7110->osdbpp[av7110->osdwin]],
-				color, ((blend >> 4) & 0x0f));
-	return ret;
-}
-
-static int OSDSetPalette(struct av7110 *av7110, u32 __user * colors, u8 first, u8 last)
-{
-	int i;
-	int length = last - first + 1;
-
-	if (length * 4 > DATA_BUFF3_SIZE)
-		return -EINVAL;
-
-	for (i = 0; i < length; i++) {
-		u32 color, blend, yuv;
-
-		if (get_user(color, colors + i))
-			return -EFAULT;
-		blend = (color & 0xF0000000) >> 4;
-		yuv = blend ? RGB2YUV(color & 0xFF, (color >> 8) & 0xFF,
-				     (color >> 16) & 0xFF) | blend : 0;
-		yuv = ((yuv & 0xFFFF0000) >> 16) | ((yuv & 0x0000FFFF) << 16);
-		wdebi(av7110, DEBINOSWAP, DATA_BUFF3_BASE + i * 4, yuv, 4);
-	}
-	return av7110_fw_cmd(av7110, COMTYPE_OSD, Set_Palette, 4,
-			    av7110->osdwin,
-			    bpp2pal[av7110->osdbpp[av7110->osdwin]],
-			    first, last);
-}
-
-static int OSDSetBlock(struct av7110 *av7110, int x0, int y0,
-		       int x1, int y1, int inc, u8 __user * data)
-{
-	uint w, h, bpp, bpl, size, lpb, bnum, brest;
-	int i;
-	int rc,release_rc;
-
-	w = x1 - x0 + 1;
-	h = y1 - y0 + 1;
-	if (inc <= 0)
-		inc = w;
-	if (w <= 0 || w > 720 || h <= 0 || h > 576)
-		return -EINVAL;
-	bpp = av7110->osdbpp[av7110->osdwin] + 1;
-	bpl = ((w * bpp + 7) & ~7) / 8;
-	size = h * bpl;
-	lpb = (32 * 1024) / bpl;
-	bnum = size / (lpb * bpl);
-	brest = size - bnum * lpb * bpl;
-
-	if (av7110->bmp_state == BMP_LOADING) {
-		/* possible if syscall is repeated by -ERESTARTSYS and if firmware cannot abort */
-		BUG_ON (FW_VERSION(av7110->arm_app) >= 0x261e);
-		rc = WaitUntilBmpLoaded(av7110);
-		if (rc)
-			return rc;
-		/* just continue. This should work for all fw versions
-		 * if bnum==1 && !brest && LoadBitmap was successful
-		 */
-	}
-
-	rc = 0;
-	for (i = 0; i < bnum; i++) {
-		rc = LoadBitmap(av7110, w, lpb, inc, data);
-		if (rc)
-			break;
-		rc = BlitBitmap(av7110, x0, y0 + i * lpb);
-		if (rc)
-			break;
-		data += lpb * inc;
-	}
-	if (!rc && brest) {
-		rc = LoadBitmap(av7110, w, brest / bpl, inc, data);
-		if (!rc)
-			rc = BlitBitmap(av7110, x0, y0 + bnum * lpb);
-	}
-	release_rc = ReleaseBitmap(av7110);
-	if (!rc)
-		rc = release_rc;
-	if (rc)
-		dprintk(1,"returns %d\n",rc);
-	return rc;
-}
-
-int av7110_osd_cmd(struct av7110 *av7110, osd_cmd_t *dc)
-{
-	int ret;
-
-	if (mutex_lock_interruptible(&av7110->osd_mutex))
-		return -ERESTARTSYS;
-
-	switch (dc->cmd) {
-	case OSD_Close:
-		ret = DestroyOSDWindow(av7110, av7110->osdwin);
-		break;
-	case OSD_Open:
-		av7110->osdbpp[av7110->osdwin] = (dc->color - 1) & 7;
-		ret = CreateOSDWindow(av7110, av7110->osdwin,
-				bpp2bit[av7110->osdbpp[av7110->osdwin]],
-				dc->x1 - dc->x0 + 1, dc->y1 - dc->y0 + 1);
-		if (ret)
-			break;
-		if (!dc->data) {
-			ret = MoveWindowAbs(av7110, av7110->osdwin, dc->x0, dc->y0);
-			if (ret)
-				break;
-			ret = SetColorBlend(av7110, av7110->osdwin);
-		}
-		break;
-	case OSD_Show:
-		ret = MoveWindowRel(av7110, av7110->osdwin, 0, 0);
-		break;
-	case OSD_Hide:
-		ret = HideWindow(av7110, av7110->osdwin);
-		break;
-	case OSD_Clear:
-		ret = DrawBlock(av7110, av7110->osdwin, 0, 0, 720, 576, 0);
-		break;
-	case OSD_Fill:
-		ret = DrawBlock(av7110, av7110->osdwin, 0, 0, 720, 576, dc->color);
-		break;
-	case OSD_SetColor:
-		ret = OSDSetColor(av7110, dc->color, dc->x0, dc->y0, dc->x1, dc->y1);
-		break;
-	case OSD_SetPalette:
-		if (FW_VERSION(av7110->arm_app) >= 0x2618)
-			ret = OSDSetPalette(av7110, dc->data, dc->color, dc->x0);
-		else {
-			int i, len = dc->x0-dc->color+1;
-			u8 __user *colors = (u8 __user *)dc->data;
-			u8 r, g = 0, b = 0, blend = 0;
-			ret = 0;
-			for (i = 0; i<len; i++) {
-				if (get_user(r, colors + i * 4) ||
-				    get_user(g, colors + i * 4 + 1) ||
-				    get_user(b, colors + i * 4 + 2) ||
-				    get_user(blend, colors + i * 4 + 3)) {
-					ret = -EFAULT;
-					break;
-				    }
-				ret = OSDSetColor(av7110, dc->color + i, r, g, b, blend);
-				if (ret)
-					break;
-			}
-		}
-		break;
-	case OSD_SetPixel:
-		ret = DrawLine(av7110, av7110->osdwin,
-			 dc->x0, dc->y0, 0, 0, dc->color);
-		break;
-	case OSD_SetRow:
-		dc->y1 = dc->y0;
-		/* fall through */
-	case OSD_SetBlock:
-		ret = OSDSetBlock(av7110, dc->x0, dc->y0, dc->x1, dc->y1, dc->color, dc->data);
-		break;
-	case OSD_FillRow:
-		ret = DrawBlock(av7110, av7110->osdwin, dc->x0, dc->y0,
-			  dc->x1-dc->x0+1, dc->y1, dc->color);
-		break;
-	case OSD_FillBlock:
-		ret = DrawBlock(av7110, av7110->osdwin, dc->x0, dc->y0,
-			  dc->x1 - dc->x0 + 1, dc->y1 - dc->y0 + 1, dc->color);
-		break;
-	case OSD_Line:
-		ret = DrawLine(av7110, av7110->osdwin,
-			 dc->x0, dc->y0, dc->x1 - dc->x0, dc->y1 - dc->y0, dc->color);
-		break;
-	case OSD_Text:
-	{
-		char textbuf[240];
-
-		if (strncpy_from_user(textbuf, dc->data, 240) < 0) {
-			ret = -EFAULT;
-			break;
-		}
-		textbuf[239] = 0;
-		if (dc->x1 > 3)
-			dc->x1 = 3;
-		ret = SetFont(av7110, av7110->osdwin, dc->x1,
-			(u16) (dc->color & 0xffff), (u16) (dc->color >> 16));
-		if (!ret)
-			ret = FlushText(av7110);
-		if (!ret)
-			ret = WriteText(av7110, av7110->osdwin, dc->x0, dc->y0, textbuf);
-		break;
-	}
-	case OSD_SetWindow:
-		if (dc->x0 < 1 || dc->x0 > 7)
-			ret = -EINVAL;
-		else {
-			av7110->osdwin = dc->x0;
-			ret = 0;
-		}
-		break;
-	case OSD_MoveWindow:
-		ret = MoveWindowAbs(av7110, av7110->osdwin, dc->x0, dc->y0);
-		if (!ret)
-			ret = SetColorBlend(av7110, av7110->osdwin);
-		break;
-	case OSD_OpenRaw:
-		if (dc->color < OSD_BITMAP1 || dc->color > OSD_CURSOR) {
-			ret = -EINVAL;
-			break;
-		}
-		if (dc->color >= OSD_BITMAP1 && dc->color <= OSD_BITMAP8HR)
-			av7110->osdbpp[av7110->osdwin] = (1 << (dc->color & 3)) - 1;
-		else
-			av7110->osdbpp[av7110->osdwin] = 0;
-		ret = CreateOSDWindow(av7110, av7110->osdwin, (osd_raw_window_t)dc->color,
-				dc->x1 - dc->x0 + 1, dc->y1 - dc->y0 + 1);
-		if (ret)
-			break;
-		if (!dc->data) {
-			ret = MoveWindowAbs(av7110, av7110->osdwin, dc->x0, dc->y0);
-			if (!ret)
-				ret = SetColorBlend(av7110, av7110->osdwin);
-		}
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-
-	mutex_unlock(&av7110->osd_mutex);
-	if (ret==-ERESTARTSYS)
-		dprintk(1, "av7110_osd_cmd(%d) returns with -ERESTARTSYS\n",dc->cmd);
-	else if (ret)
-		dprintk(1, "av7110_osd_cmd(%d) returns with %d\n",dc->cmd,ret);
-
-	return ret;
-}
-
-int av7110_osd_capability(struct av7110 *av7110, osd_cap_t *cap)
-{
-	switch (cap->cmd) {
-	case OSD_CAP_MEMSIZE:
-		if (FW_4M_SDRAM(av7110->arm_app))
-			cap->val = 1000000;
-		else
-			cap->val = 92000;
-		return 0;
-	default:
-		return -EINVAL;
-	}
-}
-#endif /* CONFIG_DVB_AV7110_OSD */
diff --git a/drivers/media/dvb/ttpci/av7110_hw.h b/drivers/media/dvb/ttpci/av7110_hw.h
deleted file mode 100644
index 1634aba..0000000
--- a/drivers/media/dvb/ttpci/av7110_hw.h
+++ /dev/null
@@ -1,495 +0,0 @@
-#ifndef _AV7110_HW_H_
-#define _AV7110_HW_H_
-
-#include "av7110.h"
-
-/* DEBI transfer mode defs */
-
-#define DEBINOSWAP 0x000e0000
-#define DEBISWAB   0x001e0000
-#define DEBISWAP   0x002e0000
-
-#define ARM_WAIT_FREE  (HZ)
-#define ARM_WAIT_SHAKE (HZ/5)
-#define ARM_WAIT_OSD (HZ)
-
-
-enum av7110_bootstate
-{
-	BOOTSTATE_BUFFER_EMPTY	= 0,
-	BOOTSTATE_BUFFER_FULL	= 1,
-	BOOTSTATE_AV7110_BOOT_COMPLETE	= 2
-};
-
-enum av7110_type_rec_play_format
-{	RP_None,
-	AudioPES,
-	AudioMp2,
-	AudioPCM,
-	VideoPES,
-	AV_PES
-};
-
-enum av7110_osd_palette_type
-{
-	NoPalet =  0,	   /* No palette */
-	Pal1Bit =  2,	   /* 2 colors for 1 Bit Palette    */
-	Pal2Bit =  4,	   /* 4 colors for 2 bit palette    */
-	Pal4Bit =  16,	   /* 16 colors for 4 bit palette   */
-	Pal8Bit =  256	   /* 256 colors for 16 bit palette */
-};
-
-/* switch defines */
-#define SB_GPIO 3
-#define SB_OFF	SAA7146_GPIO_OUTLO  /* SlowBlank off (TV-Mode) */
-#define SB_ON	SAA7146_GPIO_INPUT  /* SlowBlank on  (AV-Mode) */
-#define SB_WIDE SAA7146_GPIO_OUTHI  /* SlowBlank 6V  (16/9-Mode) (not implemented) */
-
-#define FB_GPIO 1
-#define FB_OFF	SAA7146_GPIO_LO     /* FastBlank off (CVBS-Mode) */
-#define FB_ON	SAA7146_GPIO_OUTHI  /* FastBlank on  (RGB-Mode) */
-#define FB_LOOP	SAA7146_GPIO_INPUT  /* FastBlank loop-through (PC graphics ???) */
-
-enum av7110_video_output_mode
-{
-	NO_OUT	     = 0,		/* disable analog output */
-	CVBS_RGB_OUT = 1,
-	CVBS_YC_OUT  = 2,
-	YC_OUT	     = 3
-};
-
-/* firmware internal msg q status: */
-#define GPMQFull	0x0001		/* Main Message Queue Full */
-#define GPMQOver	0x0002		/* Main Message Queue Overflow */
-#define HPQFull		0x0004		/* High Priority Msg Queue Full */
-#define HPQOver		0x0008
-#define OSDQFull	0x0010		/* OSD Queue Full */
-#define OSDQOver	0x0020
-#define GPMQBusy	0x0040		/* Queue not empty, FW >= 261d */
-#define HPQBusy		0x0080
-#define OSDQBusy	0x0100
-
-/* hw section filter flags */
-#define	SECTION_EIT		0x01
-#define	SECTION_SINGLE		0x00
-#define	SECTION_CYCLE		0x02
-#define	SECTION_CONTINUOS	0x04
-#define	SECTION_MODE		0x06
-#define SECTION_IPMPE		0x0C	/* size up to 4k */
-#define SECTION_HIGH_SPEED	0x1C	/* larger buffer */
-#define DATA_PIPING_FLAG	0x20	/* for Data Piping Filter */
-
-#define	PBUFSIZE_NONE 0x0000
-#define	PBUFSIZE_1P   0x0100
-#define	PBUFSIZE_2P   0x0200
-#define	PBUFSIZE_1K   0x0300
-#define	PBUFSIZE_2K   0x0400
-#define	PBUFSIZE_4K   0x0500
-#define	PBUFSIZE_8K   0x0600
-#define PBUFSIZE_16K  0x0700
-#define PBUFSIZE_32K  0x0800
-
-
-/* firmware command codes */
-enum av7110_osd_command {
-	WCreate,
-	WDestroy,
-	WMoveD,
-	WMoveA,
-	WHide,
-	WTop,
-	DBox,
-	DLine,
-	DText,
-	Set_Font,
-	SetColor,
-	SetBlend,
-	SetWBlend,
-	SetCBlend,
-	SetNonBlend,
-	LoadBmp,
-	BlitBmp,
-	ReleaseBmp,
-	SetWTrans,
-	SetWNoTrans,
-	Set_Palette
-};
-
-enum av7110_pid_command {
-	MultiPID,
-	VideoPID,
-	AudioPID,
-	InitFilt,
-	FiltError,
-	NewVersion,
-	CacheError,
-	AddPIDFilter,
-	DelPIDFilter,
-	Scan,
-	SetDescr,
-	SetIR,
-	FlushTSQueue
-};
-
-enum av7110_mpeg_command {
-	SelAudChannels
-};
-
-enum av7110_audio_command {
-	AudioDAC,
-	CabADAC,
-	ON22K,
-	OFF22K,
-	MainSwitch,
-	ADSwitch,
-	SendDiSEqC,
-	SetRegister,
-	SpdifSwitch
-};
-
-enum av7110_request_command {
-	AudioState,
-	AudioBuffState,
-	VideoState1,
-	VideoState2,
-	VideoState3,
-	CrashCounter,
-	ReqVersion,
-	ReqVCXO,
-	ReqRegister,
-	ReqSecFilterError,
-	ReqSTC
-};
-
-enum av7110_encoder_command {
-	SetVidMode,
-	SetTestMode,
-	LoadVidCode,
-	SetMonitorType,
-	SetPanScanType,
-	SetFreezeMode,
-	SetWSSConfig
-};
-
-enum av7110_rec_play_state {
-	__Record,
-	__Stop,
-	__Play,
-	__Pause,
-	__Slow,
-	__FF_IP,
-	__Scan_I,
-	__Continue
-};
-
-enum av7110_fw_cmd_misc {
-	AV7110_FW_VIDEO_ZOOM = 1,
-	AV7110_FW_VIDEO_COMMAND,
-	AV7110_FW_AUDIO_COMMAND
-};
-
-enum av7110_command_type {
-	COMTYPE_NOCOM,
-	COMTYPE_PIDFILTER,
-	COMTYPE_MPEGDECODER,
-	COMTYPE_OSD,
-	COMTYPE_BMP,
-	COMTYPE_ENCODER,
-	COMTYPE_AUDIODAC,
-	COMTYPE_REQUEST,
-	COMTYPE_SYSTEM,
-	COMTYPE_REC_PLAY,
-	COMTYPE_COMMON_IF,
-	COMTYPE_PID_FILTER,
-	COMTYPE_PES,
-	COMTYPE_TS,
-	COMTYPE_VIDEO,
-	COMTYPE_AUDIO,
-	COMTYPE_CI_LL,
-	COMTYPE_MISC = 0x80
-};
-
-#define VID_NONE_PREF		0x00	/* No aspect ration processing preferred */
-#define VID_PAN_SCAN_PREF	0x01	/* Pan and Scan Display preferred */
-#define VID_VERT_COMP_PREF	0x02	/* Vertical compression display preferred */
-#define VID_VC_AND_PS_PREF	0x03	/* PanScan and vertical Compression if allowed */
-#define VID_CENTRE_CUT_PREF	0x05	/* PanScan with zero vector */
-
-/* MPEG video decoder commands */
-#define AV_VIDEO_CMD_STOP	0x000e
-#define AV_VIDEO_CMD_PLAY	0x000d
-#define AV_VIDEO_CMD_FREEZE	0x0102
-#define AV_VIDEO_CMD_FFWD	0x0016
-#define AV_VIDEO_CMD_SLOW	0x0022
-
-/* MPEG audio decoder commands */
-#define AUDIO_CMD_MUTE		0x0001
-#define AUDIO_CMD_UNMUTE	0x0002
-#define AUDIO_CMD_PCM16		0x0010
-#define AUDIO_CMD_STEREO	0x0080
-#define AUDIO_CMD_MONO_L	0x0100
-#define AUDIO_CMD_MONO_R	0x0200
-#define AUDIO_CMD_SYNC_OFF	0x000e
-#define AUDIO_CMD_SYNC_ON	0x000f
-
-/* firmware data interface codes */
-#define DATA_NONE		 0x00
-#define DATA_FSECTION		 0x01
-#define DATA_IPMPE		 0x02
-#define DATA_MPEG_RECORD	 0x03
-#define DATA_DEBUG_MESSAGE	 0x04
-#define DATA_COMMON_INTERFACE	 0x05
-#define DATA_MPEG_PLAY		 0x06
-#define DATA_BMP_LOAD		 0x07
-#define DATA_IRCOMMAND		 0x08
-#define DATA_PIPING		 0x09
-#define DATA_STREAMING		 0x0a
-#define DATA_CI_GET		 0x0b
-#define DATA_CI_PUT		 0x0c
-#define DATA_MPEG_VIDEO_EVENT	 0x0d
-
-#define DATA_PES_RECORD		 0x10
-#define DATA_PES_PLAY		 0x11
-#define DATA_TS_RECORD		 0x12
-#define DATA_TS_PLAY		 0x13
-
-/* ancient CI command codes, only two are actually still used
- * by the link level CI firmware */
-#define CI_CMD_ERROR		 0x00
-#define CI_CMD_ACK		 0x01
-#define CI_CMD_SYSTEM_READY	 0x02
-#define CI_CMD_KEYPRESS		 0x03
-#define CI_CMD_ON_TUNED		 0x04
-#define CI_CMD_ON_SWITCH_PROGRAM 0x05
-#define CI_CMD_SECTION_ARRIVED	 0x06
-#define CI_CMD_SECTION_TIMEOUT	 0x07
-#define CI_CMD_TIME		 0x08
-#define CI_CMD_ENTER_MENU	 0x09
-#define CI_CMD_FAST_PSI		 0x0a
-#define CI_CMD_GET_SLOT_INFO	 0x0b
-
-#define CI_MSG_NONE		 0x00
-#define CI_MSG_CI_INFO		 0x01
-#define CI_MSG_MENU		 0x02
-#define CI_MSG_LIST		 0x03
-#define CI_MSG_TEXT		 0x04
-#define CI_MSG_REQUEST_INPUT	 0x05
-#define CI_MSG_INPUT_COMPLETE	 0x06
-#define CI_MSG_LIST_MORE	 0x07
-#define CI_MSG_MENU_MORE	 0x08
-#define CI_MSG_CLOSE_MMI_IMM	 0x09
-#define CI_MSG_SECTION_REQUEST	 0x0a
-#define CI_MSG_CLOSE_FILTER	 0x0b
-#define CI_PSI_COMPLETE		 0x0c
-#define CI_MODULE_READY		 0x0d
-#define CI_SWITCH_PRG_REPLY	 0x0e
-#define CI_MSG_TEXT_MORE	 0x0f
-
-#define CI_MSG_CA_PMT		 0xe0
-#define CI_MSG_ERROR		 0xf0
-
-
-/* base address of the dual ported RAM which serves as communication
- * area between PCI bus and av7110,
- * as seen by the DEBI bus of the saa7146 */
-#define	DPRAM_BASE 0x4000
-
-/* boot protocol area */
-#define AV7110_BOOT_STATE	(DPRAM_BASE + 0x3F8)
-#define AV7110_BOOT_SIZE	(DPRAM_BASE + 0x3FA)
-#define AV7110_BOOT_BASE	(DPRAM_BASE + 0x3FC)
-#define AV7110_BOOT_BLOCK	(DPRAM_BASE + 0x400)
-#define AV7110_BOOT_MAX_SIZE	0xc00
-
-/* firmware command protocol area */
-#define IRQ_STATE	(DPRAM_BASE + 0x0F4)
-#define IRQ_STATE_EXT	(DPRAM_BASE + 0x0F6)
-#define MSGSTATE	(DPRAM_BASE + 0x0F8)
-#define COMMAND		(DPRAM_BASE + 0x0FC)
-#define COM_BUFF	(DPRAM_BASE + 0x100)
-#define COM_BUFF_SIZE	0x20
-
-/* various data buffers */
-#define BUFF1_BASE	(DPRAM_BASE + 0x120)
-#define BUFF1_SIZE	0xE0
-
-#define DATA_BUFF0_BASE	(DPRAM_BASE + 0x200)
-#define DATA_BUFF0_SIZE	0x0800
-
-#define DATA_BUFF1_BASE	(DATA_BUFF0_BASE+DATA_BUFF0_SIZE)
-#define DATA_BUFF1_SIZE	0x0800
-
-#define DATA_BUFF2_BASE	(DATA_BUFF1_BASE+DATA_BUFF1_SIZE)
-#define DATA_BUFF2_SIZE	0x0800
-
-#define DATA_BUFF3_BASE (DATA_BUFF2_BASE+DATA_BUFF2_SIZE)
-#define DATA_BUFF3_SIZE 0x0400
-
-#define Reserved	(DPRAM_BASE + 0x1E00)
-#define Reserved_SIZE	0x1C0
-
-
-/* firmware status area */
-#define STATUS_BASE	(DPRAM_BASE + 0x1FC0)
-#define STATUS_LOOPS	(STATUS_BASE + 0x08)
-
-#define STATUS_MPEG_WIDTH     (STATUS_BASE + 0x0C)
-/* ((aspect_ratio & 0xf) << 12) | (height & 0xfff) */
-#define STATUS_MPEG_HEIGHT_AR (STATUS_BASE + 0x0E)
-
-/* firmware data protocol area */
-#define RX_TYPE		(DPRAM_BASE + 0x1FE8)
-#define RX_LEN		(DPRAM_BASE + 0x1FEA)
-#define TX_TYPE		(DPRAM_BASE + 0x1FEC)
-#define TX_LEN		(DPRAM_BASE + 0x1FEE)
-
-#define RX_BUFF		(DPRAM_BASE + 0x1FF4)
-#define TX_BUFF		(DPRAM_BASE + 0x1FF6)
-
-#define HANDSHAKE_REG	(DPRAM_BASE + 0x1FF8)
-#define COM_IF_LOCK	(DPRAM_BASE + 0x1FFA)
-
-#define IRQ_RX		(DPRAM_BASE + 0x1FFC)
-#define IRQ_TX		(DPRAM_BASE + 0x1FFE)
-
-/* used by boot protocol to load firmware into av7110 DRAM */
-#define DRAM_START_CODE		0x2e000404
-#define DRAM_MAX_CODE_SIZE	0x00100000
-
-/* saa7146 gpio lines */
-#define RESET_LINE		2
-#define DEBI_DONE_LINE		1
-#define ARM_IRQ_LINE		0
-
-
-
-extern int av7110_bootarm(struct av7110 *av7110);
-extern int av7110_firmversion(struct av7110 *av7110);
-#define FW_CI_LL_SUPPORT(arm_app) ((arm_app) & 0x80000000)
-#define FW_4M_SDRAM(arm_app)      ((arm_app) & 0x40000000)
-#define FW_VERSION(arm_app)	  ((arm_app) & 0x0000FFFF)
-
-extern int av7110_wait_msgstate(struct av7110 *av7110, u16 flags);
-extern int av7110_fw_cmd(struct av7110 *av7110, int type, int com, int num, ...);
-extern int av7110_fw_request(struct av7110 *av7110, u16 *request_buf,
-			     int request_buf_len, u16 *reply_buf, int reply_buf_len);
-
-
-/* DEBI (saa7146 data extension bus interface) access */
-extern int av7110_debiwrite(struct av7110 *av7110, u32 config,
-			    int addr, u32 val, int count);
-extern u32 av7110_debiread(struct av7110 *av7110, u32 config,
-			   int addr, int count);
-
-
-/* DEBI during interrupt */
-/* single word writes */
-static inline void iwdebi(struct av7110 *av7110, u32 config, int addr, u32 val, int count)
-{
-	av7110_debiwrite(av7110, config, addr, val, count);
-}
-
-/* buffer writes */
-static inline void mwdebi(struct av7110 *av7110, u32 config, int addr,
-			  const u8 *val, int count)
-{
-	memcpy(av7110->debi_virt, val, count);
-	av7110_debiwrite(av7110, config, addr, 0, count);
-}
-
-static inline u32 irdebi(struct av7110 *av7110, u32 config, int addr, u32 val, int count)
-{
-	u32 res;
-
-	res=av7110_debiread(av7110, config, addr, count);
-	if (count<=4)
-		memcpy(av7110->debi_virt, (char *) &res, count);
-	return res;
-}
-
-/* DEBI outside interrupts, only for count <= 4! */
-static inline void wdebi(struct av7110 *av7110, u32 config, int addr, u32 val, int count)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&av7110->debilock, flags);
-	av7110_debiwrite(av7110, config, addr, val, count);
-	spin_unlock_irqrestore(&av7110->debilock, flags);
-}
-
-static inline u32 rdebi(struct av7110 *av7110, u32 config, int addr, u32 val, int count)
-{
-	unsigned long flags;
-	u32 res;
-
-	spin_lock_irqsave(&av7110->debilock, flags);
-	res=av7110_debiread(av7110, config, addr, count);
-	spin_unlock_irqrestore(&av7110->debilock, flags);
-	return res;
-}
-
-/* handle mailbox registers of the dual ported RAM */
-static inline void ARM_ResetMailBox(struct av7110 *av7110)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&av7110->debilock, flags);
-	av7110_debiread(av7110, DEBINOSWAP, IRQ_RX, 2);
-	av7110_debiwrite(av7110, DEBINOSWAP, IRQ_RX, 0, 2);
-	spin_unlock_irqrestore(&av7110->debilock, flags);
-}
-
-static inline void ARM_ClearMailBox(struct av7110 *av7110)
-{
-	iwdebi(av7110, DEBINOSWAP, IRQ_RX, 0, 2);
-}
-
-static inline void ARM_ClearIrq(struct av7110 *av7110)
-{
-	irdebi(av7110, DEBINOSWAP, IRQ_RX, 0, 2);
-}
-
-/****************************************************************************
- * Firmware commands
- ****************************************************************************/
-
-static inline int SendDAC(struct av7110 *av7110, u8 addr, u8 data)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, AudioDAC, 2, addr, data);
-}
-
-static inline int av7710_set_video_mode(struct av7110 *av7110, int mode)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetVidMode, 1, mode);
-}
-
-static inline int vidcom(struct av7110 *av7110, u32 com, u32 arg)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_MISC, AV7110_FW_VIDEO_COMMAND, 4,
-			     (com>>16), (com&0xffff),
-			     (arg>>16), (arg&0xffff));
-}
-
-static inline int audcom(struct av7110 *av7110, u32 com)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_MISC, AV7110_FW_AUDIO_COMMAND, 2,
-			     (com>>16), (com&0xffff));
-}
-
-static inline int Set22K(struct av7110 *av7110, int state)
-{
-	return av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, (state ? ON22K : OFF22K), 0);
-}
-
-
-extern int av7110_diseqc_send(struct av7110 *av7110, int len, u8 *msg, unsigned long burst);
-
-
-#ifdef CONFIG_DVB_AV7110_OSD
-extern int av7110_osd_cmd(struct av7110 *av7110, osd_cmd_t *dc);
-extern int av7110_osd_capability(struct av7110 *av7110, osd_cap_t *cap);
-#endif /* CONFIG_DVB_AV7110_OSD */
-
-
-
-#endif /* _AV7110_HW_H_ */
diff --git a/drivers/media/dvb/ttpci/av7110_ipack.c b/drivers/media/dvb/ttpci/av7110_ipack.c
deleted file mode 100644
index 699ef8b..0000000
--- a/drivers/media/dvb/ttpci/av7110_ipack.c
+++ /dev/null
@@ -1,403 +0,0 @@
-#include "dvb_filter.h"
-#include "av7110_ipack.h"
-#include <linux/string.h>	/* for memcpy() */
-#include <linux/vmalloc.h>
-
-
-void av7110_ipack_reset(struct ipack *p)
-{
-	p->found = 0;
-	p->cid = 0;
-	p->plength = 0;
-	p->flag1 = 0;
-	p->flag2 = 0;
-	p->hlength = 0;
-	p->mpeg = 0;
-	p->check = 0;
-	p->which = 0;
-	p->done = 0;
-	p->count = 0;
-}
-
-
-int av7110_ipack_init(struct ipack *p, int size,
-		      void (*func)(u8 *buf, int size, void *priv))
-{
-	if (!(p->buf = vmalloc(size*sizeof(u8)))) {
-		printk(KERN_WARNING "Couldn't allocate memory for ipack\n");
-		return -ENOMEM;
-	}
-	p->size = size;
-	p->func = func;
-	p->repack_subids = 0;
-	av7110_ipack_reset(p);
-	return 0;
-}
-
-
-void av7110_ipack_free(struct ipack *p)
-{
-	vfree(p->buf);
-}
-
-
-static void send_ipack(struct ipack *p)
-{
-	int off;
-	struct dvb_audio_info ai;
-	int ac3_off = 0;
-	int streamid = 0;
-	int nframes = 0;
-	int f = 0;
-
-	switch (p->mpeg) {
-	case 2:
-		if (p->count < 10)
-			return;
-		p->buf[3] = p->cid;
-		p->buf[4] = (u8)(((p->count - 6) & 0xff00) >> 8);
-		p->buf[5] = (u8)((p->count - 6) & 0x00ff);
-		if (p->repack_subids && p->cid == PRIVATE_STREAM1) {
-			off = 9 + p->buf[8];
-			streamid = p->buf[off];
-			if ((streamid & 0xf8) == 0x80) {
-				ai.off = 0;
-				ac3_off = ((p->buf[off + 2] << 8)|
-					   p->buf[off + 3]);
-				if (ac3_off < p->count)
-					f = dvb_filter_get_ac3info(p->buf + off + 3 + ac3_off,
-								   p->count - ac3_off, &ai, 0);
-				if (!f) {
-					nframes = (p->count - off - 3 - ac3_off) /
-						ai.framesize + 1;
-					p->buf[off + 2] = (ac3_off >> 8) & 0xff;
-					p->buf[off + 3] = (ac3_off) & 0xff;
-					p->buf[off + 1] = nframes;
-					ac3_off +=  nframes * ai.framesize - p->count;
-				}
-			}
-		}
-		p->func(p->buf, p->count, p->data);
-
-		p->buf[6] = 0x80;
-		p->buf[7] = 0x00;
-		p->buf[8] = 0x00;
-		p->count = 9;
-		if (p->repack_subids && p->cid == PRIVATE_STREAM1
-		    && (streamid & 0xf8) == 0x80) {
-			p->count += 4;
-			p->buf[9] = streamid;
-			p->buf[10] = (ac3_off >> 8) & 0xff;
-			p->buf[11] = (ac3_off) & 0xff;
-			p->buf[12] = 0;
-		}
-		break;
-
-	case 1:
-		if (p->count < 8)
-			return;
-		p->buf[3] = p->cid;
-		p->buf[4] = (u8)(((p->count - 6) & 0xff00) >> 8);
-		p->buf[5] = (u8)((p->count - 6) & 0x00ff);
-		p->func(p->buf, p->count, p->data);
-
-		p->buf[6] = 0x0f;
-		p->count = 7;
-		break;
-	}
-}
-
-
-void av7110_ipack_flush(struct ipack *p)
-{
-	if (p->plength != MMAX_PLENGTH - 6 || p->found <= 6)
-		return;
-	p->plength = p->found - 6;
-	p->found = 0;
-	send_ipack(p);
-	av7110_ipack_reset(p);
-}
-
-
-static void write_ipack(struct ipack *p, const u8 *data, int count)
-{
-	u8 headr[3] = { 0x00, 0x00, 0x01 };
-
-	if (p->count < 6) {
-		memcpy(p->buf, headr, 3);
-		p->count = 6;
-	}
-
-	if (p->count + count < p->size){
-		memcpy(p->buf+p->count, data, count);
-		p->count += count;
-	} else {
-		int rest = p->size - p->count;
-		memcpy(p->buf+p->count, data, rest);
-		p->count += rest;
-		send_ipack(p);
-		if (count - rest > 0)
-			write_ipack(p, data + rest, count - rest);
-	}
-}
-
-
-int av7110_ipack_instant_repack (const u8 *buf, int count, struct ipack *p)
-{
-	int l;
-	int c = 0;
-
-	while (c < count && (p->mpeg == 0 ||
-			     (p->mpeg == 1 && p->found < 7) ||
-			     (p->mpeg == 2 && p->found < 9))
-	       &&  (p->found < 5 || !p->done)) {
-		switch (p->found) {
-		case 0:
-		case 1:
-			if (buf[c] == 0x00)
-				p->found++;
-			else
-				p->found = 0;
-			c++;
-			break;
-		case 2:
-			if (buf[c] == 0x01)
-				p->found++;
-			else if (buf[c] == 0)
-				p->found = 2;
-			else
-				p->found = 0;
-			c++;
-			break;
-		case 3:
-			p->cid = 0;
-			switch (buf[c]) {
-			case PROG_STREAM_MAP:
-			case PRIVATE_STREAM2:
-			case PROG_STREAM_DIR:
-			case ECM_STREAM     :
-			case EMM_STREAM     :
-			case PADDING_STREAM :
-			case DSM_CC_STREAM  :
-			case ISO13522_STREAM:
-				p->done = 1;
-				/* fall through */
-			case PRIVATE_STREAM1:
-			case VIDEO_STREAM_S ... VIDEO_STREAM_E:
-			case AUDIO_STREAM_S ... AUDIO_STREAM_E:
-				p->found++;
-				p->cid = buf[c];
-				c++;
-				break;
-			default:
-				p->found = 0;
-				break;
-			}
-			break;
-
-		case 4:
-			if (count-c > 1) {
-				p->plen[0] = buf[c];
-				c++;
-				p->plen[1] = buf[c];
-				c++;
-				p->found += 2;
-				p->plength = (p->plen[0] << 8) | p->plen[1];
-			} else {
-				p->plen[0] = buf[c];
-				p->found++;
-				return count;
-			}
-			break;
-		case 5:
-			p->plen[1] = buf[c];
-			c++;
-			p->found++;
-			p->plength = (p->plen[0] << 8) | p->plen[1];
-			break;
-		case 6:
-			if (!p->done) {
-				p->flag1 = buf[c];
-				c++;
-				p->found++;
-				if ((p->flag1 & 0xc0) == 0x80)
-					p->mpeg = 2;
-				else {
-					p->hlength = 0;
-					p->which = 0;
-					p->mpeg = 1;
-					p->flag2 = 0;
-				}
-			}
-			break;
-
-		case 7:
-			if (!p->done && p->mpeg == 2) {
-				p->flag2 = buf[c];
-				c++;
-				p->found++;
-			}
-			break;
-
-		case 8:
-			if (!p->done && p->mpeg == 2) {
-				p->hlength = buf[c];
-				c++;
-				p->found++;
-			}
-			break;
-		}
-	}
-
-	if (c == count)
-		return count;
-
-	if (!p->plength)
-		p->plength = MMAX_PLENGTH - 6;
-
-	if (p->done || ((p->mpeg == 2 && p->found >= 9) ||
-			(p->mpeg == 1 && p->found >= 7))) {
-		switch (p->cid) {
-		case AUDIO_STREAM_S ... AUDIO_STREAM_E:
-		case VIDEO_STREAM_S ... VIDEO_STREAM_E:
-		case PRIVATE_STREAM1:
-			if (p->mpeg == 2 && p->found == 9) {
-				write_ipack(p, &p->flag1, 1);
-				write_ipack(p, &p->flag2, 1);
-				write_ipack(p, &p->hlength, 1);
-			}
-
-			if (p->mpeg == 1 && p->found == 7)
-				write_ipack(p, &p->flag1, 1);
-
-			if (p->mpeg == 2 && (p->flag2 & PTS_ONLY) &&
-			    p->found < 14) {
-				while (c < count && p->found < 14) {
-					p->pts[p->found - 9] = buf[c];
-					write_ipack(p, buf + c, 1);
-					c++;
-					p->found++;
-				}
-				if (c == count)
-					return count;
-			}
-
-			if (p->mpeg == 1 && p->which < 2000) {
-
-				if (p->found == 7) {
-					p->check = p->flag1;
-					p->hlength = 1;
-				}
-
-				while (!p->which && c < count &&
-				       p->check == 0xff){
-					p->check = buf[c];
-					write_ipack(p, buf + c, 1);
-					c++;
-					p->found++;
-					p->hlength++;
-				}
-
-				if (c == count)
-					return count;
-
-				if ((p->check & 0xc0) == 0x40 && !p->which) {
-					p->check = buf[c];
-					write_ipack(p, buf + c, 1);
-					c++;
-					p->found++;
-					p->hlength++;
-
-					p->which = 1;
-					if (c == count)
-						return count;
-					p->check = buf[c];
-					write_ipack(p, buf + c, 1);
-					c++;
-					p->found++;
-					p->hlength++;
-					p->which = 2;
-					if (c == count)
-						return count;
-				}
-
-				if (p->which == 1) {
-					p->check = buf[c];
-					write_ipack(p, buf + c, 1);
-					c++;
-					p->found++;
-					p->hlength++;
-					p->which = 2;
-					if (c == count)
-						return count;
-				}
-
-				if ((p->check & 0x30) && p->check != 0xff) {
-					p->flag2 = (p->check & 0xf0) << 2;
-					p->pts[0] = p->check;
-					p->which = 3;
-				}
-
-				if (c == count)
-					return count;
-				if (p->which > 2){
-					if ((p->flag2 & PTS_DTS_FLAGS) == PTS_ONLY) {
-						while (c < count && p->which < 7) {
-							p->pts[p->which - 2] = buf[c];
-							write_ipack(p, buf + c, 1);
-							c++;
-							p->found++;
-							p->which++;
-							p->hlength++;
-						}
-						if (c == count)
-							return count;
-					} else if ((p->flag2 & PTS_DTS_FLAGS) == PTS_DTS) {
-						while (c < count && p->which < 12) {
-							if (p->which < 7)
-								p->pts[p->which - 2] = buf[c];
-							write_ipack(p, buf + c, 1);
-							c++;
-							p->found++;
-							p->which++;
-							p->hlength++;
-						}
-						if (c == count)
-							return count;
-					}
-					p->which = 2000;
-				}
-
-			}
-
-			while (c < count && p->found < p->plength + 6) {
-				l = count - c;
-				if (l + p->found > p->plength + 6)
-					l = p->plength + 6 - p->found;
-				write_ipack(p, buf + c, l);
-				p->found += l;
-				c += l;
-			}
-			break;
-		}
-
-
-		if (p->done) {
-			if (p->found + count - c < p->plength + 6) {
-				p->found += count - c;
-				c = count;
-			} else {
-				c += p->plength + 6 - p->found;
-				p->found = p->plength + 6;
-			}
-		}
-
-		if (p->plength && p->found == p->plength + 6) {
-			send_ipack(p);
-			av7110_ipack_reset(p);
-			if (c < count)
-				av7110_ipack_instant_repack(buf + c, count - c, p);
-		}
-	}
-	return count;
-}
diff --git a/drivers/media/dvb/ttpci/av7110_ipack.h b/drivers/media/dvb/ttpci/av7110_ipack.h
deleted file mode 100644
index becf94d..0000000
--- a/drivers/media/dvb/ttpci/av7110_ipack.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _AV7110_IPACK_H_
-#define _AV7110_IPACK_H_
-
-extern int av7110_ipack_init(struct ipack *p, int size,
-			     void (*func)(u8 *buf,  int size, void *priv));
-
-extern void av7110_ipack_reset(struct ipack *p);
-extern int  av7110_ipack_instant_repack(const u8 *buf, int count, struct ipack *p);
-extern void av7110_ipack_free(struct ipack * p);
-extern void av7110_ipack_flush(struct ipack *p);
-
-#endif
diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/dvb/ttpci/av7110_ir.c
deleted file mode 100644
index 908f272..0000000
--- a/drivers/media/dvb/ttpci/av7110_ir.c
+++ /dev/null
@@ -1,415 +0,0 @@
-/*
- * Driver for the remote control of SAA7146 based AV7110 cards
- *
- * Copyright (C) 1999-2003 Holger Waechtler <holger@convergence.de>
- * Copyright (C) 2003-2007 Oliver Endriss <o.endriss@gmx.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- */
-
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/proc_fs.h>
-#include <linux/kernel.h>
-#include <linux/bitops.h>
-
-#include "av7110.h"
-#include "av7110_hw.h"
-
-
-#define AV_CNT		4
-
-#define IR_RC5		0
-#define IR_RCMM		1
-#define IR_RC5_EXT	2 /* internal only */
-
-#define IR_ALL		0xffffffff
-
-#define UP_TIMEOUT	(HZ*7/25)
-
-
-/* Note: enable ir debugging by or'ing debug with 16 */
-
-static int ir_protocol[AV_CNT] = { IR_RCMM, IR_RCMM, IR_RCMM, IR_RCMM};
-module_param_array(ir_protocol, int, NULL, 0644);
-MODULE_PARM_DESC(ir_protocol, "Infrared protocol: 0 RC5, 1 RCMM (default)");
-
-static int ir_inversion[AV_CNT];
-module_param_array(ir_inversion, int, NULL, 0644);
-MODULE_PARM_DESC(ir_inversion, "Inversion of infrared signal: 0 not inverted (default), 1 inverted");
-
-static uint ir_device_mask[AV_CNT] = { IR_ALL, IR_ALL, IR_ALL, IR_ALL };
-module_param_array(ir_device_mask, uint, NULL, 0644);
-MODULE_PARM_DESC(ir_device_mask, "Bitmask of infrared devices: bit 0..31 = device 0..31 (default: all)");
-
-
-static int av_cnt;
-static struct av7110 *av_list[AV_CNT];
-
-static u16 default_key_map [256] = {
-	KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7,
-	KEY_8, KEY_9, KEY_BACK, 0, KEY_POWER, KEY_MUTE, 0, KEY_INFO,
-	KEY_VOLUMEUP, KEY_VOLUMEDOWN, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	KEY_CHANNELUP, KEY_CHANNELDOWN, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, KEY_TEXT, 0, 0, KEY_TV, 0, 0, 0, 0, 0, KEY_SETUP, 0, 0,
-	0, 0, 0, KEY_SUBTITLE, 0, 0, KEY_LANGUAGE, 0,
-	KEY_RADIO, 0, 0, 0, 0, KEY_EXIT, 0, 0,
-	KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_OK, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_RED, KEY_GREEN, KEY_YELLOW,
-	KEY_BLUE, 0, 0, 0, 0, 0, 0, 0, KEY_MENU, KEY_LIST, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, KEY_UP, KEY_UP, KEY_DOWN, KEY_DOWN,
-	0, 0, 0, 0, KEY_EPG, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_VCR
-};
-
-
-/* key-up timer */
-static void av7110_emit_keyup(unsigned long parm)
-{
-	struct infrared *ir = (struct infrared *) parm;
-
-	if (!ir || !test_bit(ir->last_key, ir->input_dev->key))
-		return;
-
-	input_report_key(ir->input_dev, ir->last_key, 0);
-	input_sync(ir->input_dev);
-}
-
-
-/* tasklet */
-static void av7110_emit_key(unsigned long parm)
-{
-	struct infrared *ir = (struct infrared *) parm;
-	u32 ircom = ir->ir_command;
-	u8 data;
-	u8 addr;
-	u16 toggle;
-	u16 keycode;
-
-	/* extract device address and data */
-	switch (ir->protocol) {
-	case IR_RC5: /* RC5: 5 bits device address, 6 bits data */
-		data = ircom & 0x3f;
-		addr = (ircom >> 6) & 0x1f;
-		toggle = ircom & 0x0800;
-		break;
-
-	case IR_RCMM: /* RCMM: ? bits device address, ? bits data */
-		data = ircom & 0xff;
-		addr = (ircom >> 8) & 0x1f;
-		toggle = ircom & 0x8000;
-		break;
-
-	case IR_RC5_EXT: /* extended RC5: 5 bits device address, 7 bits data */
-		data = ircom & 0x3f;
-		addr = (ircom >> 6) & 0x1f;
-		/* invert 7th data bit for backward compatibility with RC5 keymaps */
-		if (!(ircom & 0x1000))
-			data |= 0x40;
-		toggle = ircom & 0x0800;
-		break;
-
-	default:
-		printk("%s invalid protocol %x\n", __func__, ir->protocol);
-		return;
-	}
-
-	input_event(ir->input_dev, EV_MSC, MSC_RAW, (addr << 16) | data);
-	input_event(ir->input_dev, EV_MSC, MSC_SCAN, data);
-
-	keycode = ir->key_map[data];
-
-	dprintk(16, "%s: code %08x -> addr %i data 0x%02x -> keycode %i\n",
-		__func__, ircom, addr, data, keycode);
-
-	/* check device address */
-	if (!(ir->device_mask & (1 << addr)))
-		return;
-
-	if (!keycode) {
-		printk ("%s: code %08x -> addr %i data 0x%02x -> unknown key!\n",
-			__func__, ircom, addr, data);
-		return;
-	}
-
-	if (timer_pending(&ir->keyup_timer)) {
-		del_timer(&ir->keyup_timer);
-		if (ir->last_key != keycode || toggle != ir->last_toggle) {
-			ir->delay_timer_finished = 0;
-			input_event(ir->input_dev, EV_KEY, ir->last_key, 0);
-			input_event(ir->input_dev, EV_KEY, keycode, 1);
-			input_sync(ir->input_dev);
-		} else if (ir->delay_timer_finished) {
-			input_event(ir->input_dev, EV_KEY, keycode, 2);
-			input_sync(ir->input_dev);
-		}
-	} else {
-		ir->delay_timer_finished = 0;
-		input_event(ir->input_dev, EV_KEY, keycode, 1);
-		input_sync(ir->input_dev);
-	}
-
-	ir->last_key = keycode;
-	ir->last_toggle = toggle;
-
-	ir->keyup_timer.expires = jiffies + UP_TIMEOUT;
-	add_timer(&ir->keyup_timer);
-
-}
-
-
-/* register with input layer */
-static void input_register_keys(struct infrared *ir)
-{
-	int i;
-
-	set_bit(EV_KEY, ir->input_dev->evbit);
-	set_bit(EV_REP, ir->input_dev->evbit);
-	set_bit(EV_MSC, ir->input_dev->evbit);
-
-	set_bit(MSC_RAW, ir->input_dev->mscbit);
-	set_bit(MSC_SCAN, ir->input_dev->mscbit);
-
-	memset(ir->input_dev->keybit, 0, sizeof(ir->input_dev->keybit));
-
-	for (i = 0; i < ARRAY_SIZE(ir->key_map); i++) {
-		if (ir->key_map[i] > KEY_MAX)
-			ir->key_map[i] = 0;
-		else if (ir->key_map[i] > KEY_RESERVED)
-			set_bit(ir->key_map[i], ir->input_dev->keybit);
-	}
-
-	ir->input_dev->keycode = ir->key_map;
-	ir->input_dev->keycodesize = sizeof(ir->key_map[0]);
-	ir->input_dev->keycodemax = ARRAY_SIZE(ir->key_map);
-}
-
-
-/* called by the input driver after rep[REP_DELAY] ms */
-static void input_repeat_key(unsigned long parm)
-{
-	struct infrared *ir = (struct infrared *) parm;
-
-	ir->delay_timer_finished = 1;
-}
-
-
-/* check for configuration changes */
-int av7110_check_ir_config(struct av7110 *av7110, int force)
-{
-	int i;
-	int modified = force;
-	int ret = -ENODEV;
-
-	for (i = 0; i < av_cnt; i++)
-		if (av7110 == av_list[i])
-			break;
-
-	if (i < av_cnt && av7110) {
-		if ((av7110->ir.protocol & 1) != ir_protocol[i] ||
-		    av7110->ir.inversion != ir_inversion[i])
-			modified = true;
-
-		if (modified) {
-			/* protocol */
-			if (ir_protocol[i]) {
-				ir_protocol[i] = 1;
-				av7110->ir.protocol = IR_RCMM;
-				av7110->ir.ir_config = 0x0001;
-			} else if (FW_VERSION(av7110->arm_app) >= 0x2620) {
-				av7110->ir.protocol = IR_RC5_EXT;
-				av7110->ir.ir_config = 0x0002;
-			} else {
-				av7110->ir.protocol = IR_RC5;
-				av7110->ir.ir_config = 0x0000;
-			}
-			/* inversion */
-			if (ir_inversion[i]) {
-				ir_inversion[i] = 1;
-				av7110->ir.ir_config |= 0x8000;
-			}
-			av7110->ir.inversion = ir_inversion[i];
-			/* update ARM */
-			ret = av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, SetIR, 1,
-						av7110->ir.ir_config);
-		} else
-			ret = 0;
-
-		/* address */
-		if (av7110->ir.device_mask != ir_device_mask[i])
-			av7110->ir.device_mask = ir_device_mask[i];
-	}
-
-	return ret;
-}
-
-
-/* /proc/av7110_ir interface */
-static ssize_t av7110_ir_proc_write(struct file *file, const char __user *buffer,
-				    size_t count, loff_t *pos)
-{
-	char *page;
-	u32 ir_config;
-	int size = sizeof ir_config + sizeof av_list[0]->ir.key_map;
-	int i;
-
-	if (count < size)
-		return -EINVAL;
-
-	page = vmalloc(size);
-	if (!page)
-		return -ENOMEM;
-
-	if (copy_from_user(page, buffer, size)) {
-		vfree(page);
-		return -EFAULT;
-	}
-
-	memcpy(&ir_config, page, sizeof ir_config);
-
-	for (i = 0; i < av_cnt; i++) {
-		/* keymap */
-		memcpy(av_list[i]->ir.key_map, page + sizeof ir_config,
-			sizeof(av_list[i]->ir.key_map));
-		/* protocol, inversion, address */
-		ir_protocol[i] = ir_config & 0x0001;
-		ir_inversion[i] = ir_config & 0x8000 ? 1 : 0;
-		if (ir_config & 0x4000)
-			ir_device_mask[i] = 1 << ((ir_config >> 16) & 0x1f);
-		else
-			ir_device_mask[i] = IR_ALL;
-		/* update configuration */
-		av7110_check_ir_config(av_list[i], false);
-		input_register_keys(&av_list[i]->ir);
-	}
-	vfree(page);
-	return count;
-}
-
-static const struct file_operations av7110_ir_proc_fops = {
-	.owner		= THIS_MODULE,
-	.write		= av7110_ir_proc_write,
-	.llseek		= noop_llseek,
-};
-
-/* interrupt handler */
-static void ir_handler(struct av7110 *av7110, u32 ircom)
-{
-	dprintk(4, "ir command = %08x\n", ircom);
-	av7110->ir.ir_command = ircom;
-	tasklet_schedule(&av7110->ir.ir_tasklet);
-}
-
-
-int __devinit av7110_ir_init(struct av7110 *av7110)
-{
-	struct input_dev *input_dev;
-	static struct proc_dir_entry *e;
-	int err;
-
-	if (av_cnt >= ARRAY_SIZE(av_list))
-		return -ENOSPC;
-
-	av_list[av_cnt++] = av7110;
-	av7110_check_ir_config(av7110, true);
-
-	init_timer(&av7110->ir.keyup_timer);
-	av7110->ir.keyup_timer.function = av7110_emit_keyup;
-	av7110->ir.keyup_timer.data = (unsigned long) &av7110->ir;
-
-	input_dev = input_allocate_device();
-	if (!input_dev)
-		return -ENOMEM;
-
-	av7110->ir.input_dev = input_dev;
-	snprintf(av7110->ir.input_phys, sizeof(av7110->ir.input_phys),
-		"pci-%s/ir0", pci_name(av7110->dev->pci));
-
-	input_dev->name = "DVB on-card IR receiver";
-
-	input_dev->phys = av7110->ir.input_phys;
-	input_dev->id.bustype = BUS_PCI;
-	input_dev->id.version = 2;
-	if (av7110->dev->pci->subsystem_vendor) {
-		input_dev->id.vendor = av7110->dev->pci->subsystem_vendor;
-		input_dev->id.product = av7110->dev->pci->subsystem_device;
-	} else {
-		input_dev->id.vendor = av7110->dev->pci->vendor;
-		input_dev->id.product = av7110->dev->pci->device;
-	}
-	input_dev->dev.parent = &av7110->dev->pci->dev;
-	/* initial keymap */
-	memcpy(av7110->ir.key_map, default_key_map, sizeof av7110->ir.key_map);
-	input_register_keys(&av7110->ir);
-	err = input_register_device(input_dev);
-	if (err) {
-		input_free_device(input_dev);
-		return err;
-	}
-	input_dev->timer.function = input_repeat_key;
-	input_dev->timer.data = (unsigned long) &av7110->ir;
-
-	if (av_cnt == 1) {
-		e = proc_create("av7110_ir", S_IWUSR, NULL, &av7110_ir_proc_fops);
-		if (e)
-			e->size = 4 + 256 * sizeof(u16);
-	}
-
-	tasklet_init(&av7110->ir.ir_tasklet, av7110_emit_key, (unsigned long) &av7110->ir);
-	av7110->ir.ir_handler = ir_handler;
-
-	return 0;
-}
-
-
-void __devexit av7110_ir_exit(struct av7110 *av7110)
-{
-	int i;
-
-	if (av_cnt == 0)
-		return;
-
-	del_timer_sync(&av7110->ir.keyup_timer);
-	av7110->ir.ir_handler = NULL;
-	tasklet_kill(&av7110->ir.ir_tasklet);
-
-	for (i = 0; i < av_cnt; i++)
-		if (av_list[i] == av7110) {
-			av_list[i] = av_list[av_cnt-1];
-			av_list[av_cnt-1] = NULL;
-			break;
-		}
-
-	if (av_cnt == 1)
-		remove_proc_entry("av7110_ir", NULL);
-
-	input_unregister_device(av7110->ir.input_dev);
-
-	av_cnt--;
-}
-
-//MODULE_AUTHOR("Holger Waechtler <holger@convergence.de>, Oliver Endriss <o.endriss@gmx.de>");
-//MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c
deleted file mode 100644
index 1b2d151..0000000
--- a/drivers/media/dvb/ttpci/av7110_v4l.c
+++ /dev/null
@@ -1,966 +0,0 @@
-/*
- * av7110_v4l.c: av7110 video4linux interface for DVB and Siemens DVB-C analog module
- *
- * Copyright (C) 1999-2002 Ralph  Metzler
- *                       & Marcus Metzler for convergence integrated media GmbH
- *
- * originally based on code by:
- * Copyright (C) 1998,1999 Christian Theiss <mistert@rz.fh-augsburg.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- * the project's page is at http://www.linuxtv.org/ 
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/fs.h>
-#include <linux/timer.h>
-#include <linux/poll.h>
-
-#include "av7110.h"
-#include "av7110_hw.h"
-#include "av7110_av.h"
-
-int msp_writereg(struct av7110 *av7110, u8 dev, u16 reg, u16 val)
-{
-	u8 msg[5] = { dev, reg >> 8, reg & 0xff, val >> 8 , val & 0xff };
-	struct i2c_msg msgs = { .flags = 0, .len = 5, .buf = msg };
-
-	switch (av7110->adac_type) {
-	case DVB_ADAC_MSP34x0:
-		msgs.addr = 0x40;
-		break;
-	case DVB_ADAC_MSP34x5:
-		msgs.addr = 0x42;
-		break;
-	default:
-		return 0;
-	}
-
-	if (i2c_transfer(&av7110->i2c_adap, &msgs, 1) != 1) {
-		dprintk(1, "dvb-ttpci: failed @ card %d, %u = %u\n",
-		       av7110->dvb_adapter.num, reg, val);
-		return -EIO;
-	}
-	return 0;
-}
-
-static int msp_readreg(struct av7110 *av7110, u8 dev, u16 reg, u16 *val)
-{
-	u8 msg1[3] = { dev, reg >> 8, reg & 0xff };
-	u8 msg2[2];
-	struct i2c_msg msgs[2] = {
-		{ .flags = 0	   , .len = 3, .buf = msg1 },
-		{ .flags = I2C_M_RD, .len = 2, .buf = msg2 }
-	};
-
-	switch (av7110->adac_type) {
-	case DVB_ADAC_MSP34x0:
-		msgs[0].addr = 0x40;
-		msgs[1].addr = 0x40;
-		break;
-	case DVB_ADAC_MSP34x5:
-		msgs[0].addr = 0x42;
-		msgs[1].addr = 0x42;
-		break;
-	default:
-		return 0;
-	}
-
-	if (i2c_transfer(&av7110->i2c_adap, &msgs[0], 2) != 2) {
-		dprintk(1, "dvb-ttpci: failed @ card %d, %u\n",
-		       av7110->dvb_adapter.num, reg);
-		return -EIO;
-	}
-	*val = (msg2[0] << 8) | msg2[1];
-	return 0;
-}
-
-static struct v4l2_input inputs[4] = {
-	{
-		.index		= 0,
-		.name		= "DVB",
-		.type		= V4L2_INPUT_TYPE_CAMERA,
-		.audioset	= 1,
-		.tuner		= 0, /* ignored */
-		.std		= V4L2_STD_PAL_BG|V4L2_STD_NTSC_M,
-		.status		= 0,
-		.capabilities	= V4L2_IN_CAP_STD,
-	}, {
-		.index		= 1,
-		.name		= "Television",
-		.type		= V4L2_INPUT_TYPE_TUNER,
-		.audioset	= 1,
-		.tuner		= 0,
-		.std		= V4L2_STD_PAL_BG|V4L2_STD_NTSC_M,
-		.status		= 0,
-		.capabilities	= V4L2_IN_CAP_STD,
-	}, {
-		.index		= 2,
-		.name		= "Video",
-		.type		= V4L2_INPUT_TYPE_CAMERA,
-		.audioset	= 0,
-		.tuner		= 0,
-		.std		= V4L2_STD_PAL_BG|V4L2_STD_NTSC_M,
-		.status		= 0,
-		.capabilities	= V4L2_IN_CAP_STD,
-	}, {
-		.index		= 3,
-		.name		= "Y/C",
-		.type		= V4L2_INPUT_TYPE_CAMERA,
-		.audioset	= 0,
-		.tuner		= 0,
-		.std		= V4L2_STD_PAL_BG|V4L2_STD_NTSC_M,
-		.status		= 0,
-		.capabilities	= V4L2_IN_CAP_STD,
-	}
-};
-
-static int ves1820_writereg(struct saa7146_dev *dev, u8 addr, u8 reg, u8 data)
-{
-	struct av7110 *av7110 = dev->ext_priv;
-	u8 buf[] = { 0x00, reg, data };
-	struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 3 };
-
-	dprintk(4, "dev: %p\n", dev);
-
-	if (1 != i2c_transfer(&av7110->i2c_adap, &msg, 1))
-		return -1;
-	return 0;
-}
-
-static int tuner_write(struct saa7146_dev *dev, u8 addr, u8 data [4])
-{
-	struct av7110 *av7110 = dev->ext_priv;
-	struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = data, .len = 4 };
-
-	dprintk(4, "dev: %p\n", dev);
-
-	if (1 != i2c_transfer(&av7110->i2c_adap, &msg, 1))
-		return -1;
-	return 0;
-}
-
-static int ves1820_set_tv_freq(struct saa7146_dev *dev, u32 freq)
-{
-	u32 div;
-	u8 config;
-	u8 buf[4];
-
-	dprintk(4, "freq: 0x%08x\n", freq);
-
-	/* magic number: 614. tuning with the frequency given by v4l2
-	   is always off by 614*62.5 = 38375 kHz...*/
-	div = freq + 614;
-
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = div & 0xff;
-	buf[2] = 0x8e;
-
-	if (freq < (u32) (16 * 168.25))
-		config = 0xa0;
-	else if (freq < (u32) (16 * 447.25))
-		config = 0x90;
-	else
-		config = 0x30;
-	config &= ~0x02;
-
-	buf[3] = config;
-
-	return tuner_write(dev, 0x61, buf);
-}
-
-static int stv0297_set_tv_freq(struct saa7146_dev *dev, u32 freq)
-{
-	struct av7110 *av7110 = (struct av7110*)dev->ext_priv;
-	u32 div;
-	u8 data[4];
-
-	div = (freq + 38900000 + 31250) / 62500;
-
-	data[0] = (div >> 8) & 0x7f;
-	data[1] = div & 0xff;
-	data[2] = 0xce;
-
-	if (freq < 45000000)
-		return -EINVAL;
-	else if (freq < 137000000)
-		data[3] = 0x01;
-	else if (freq < 403000000)
-		data[3] = 0x02;
-	else if (freq < 860000000)
-		data[3] = 0x04;
-	else
-		return -EINVAL;
-
-	if (av7110->fe->ops.i2c_gate_ctrl)
-		av7110->fe->ops.i2c_gate_ctrl(av7110->fe, 1);
-	return tuner_write(dev, 0x63, data);
-}
-
-
-
-static struct saa7146_standard analog_standard[];
-static struct saa7146_standard dvb_standard[];
-static struct saa7146_standard standard[];
-
-static struct v4l2_audio msp3400_v4l2_audio = {
-	.index = 0,
-	.name = "Television",
-	.capability = V4L2_AUDCAP_STEREO
-};
-
-static int av7110_dvb_c_switch(struct saa7146_fh *fh)
-{
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-	struct av7110 *av7110 = (struct av7110*)dev->ext_priv;
-	u16 adswitch;
-	int source, sync, err;
-
-	dprintk(4, "%p\n", av7110);
-
-	if ((vv->video_status & STATUS_OVERLAY) != 0) {
-		vv->ov_suspend = vv->video_fh;
-		err = saa7146_stop_preview(vv->video_fh); /* side effect: video_status is now 0, video_fh is NULL */
-		if (err != 0) {
-			dprintk(2, "suspending video failed\n");
-			vv->ov_suspend = NULL;
-		}
-	}
-
-	if (0 != av7110->current_input) {
-		dprintk(1, "switching to analog TV:\n");
-		adswitch = 1;
-		source = SAA7146_HPS_SOURCE_PORT_B;
-		sync = SAA7146_HPS_SYNC_PORT_B;
-		memcpy(standard, analog_standard, sizeof(struct saa7146_standard) * 2);
-
-		switch (av7110->current_input) {
-		case 1:
-			dprintk(1, "switching SAA7113 to Analog Tuner Input\n");
-			msp_writereg(av7110, MSP_WR_DSP, 0x0008, 0x0000); // loudspeaker source
-			msp_writereg(av7110, MSP_WR_DSP, 0x0009, 0x0000); // headphone source
-			msp_writereg(av7110, MSP_WR_DSP, 0x000a, 0x0000); // SCART 1 source
-			msp_writereg(av7110, MSP_WR_DSP, 0x000e, 0x3000); // FM matrix, mono
-			msp_writereg(av7110, MSP_WR_DSP, 0x0000, 0x4f00); // loudspeaker + headphone
-			msp_writereg(av7110, MSP_WR_DSP, 0x0007, 0x4f00); // SCART 1 volume
-
-			if (av7110->analog_tuner_flags & ANALOG_TUNER_VES1820) {
-				if (ves1820_writereg(dev, 0x09, 0x0f, 0x60))
-					dprintk(1, "setting band in demodulator failed\n");
-			} else if (av7110->analog_tuner_flags & ANALOG_TUNER_STV0297) {
-				saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); // TDA9819 pin9(STD)
-				saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); // TDA9819 pin30(VIF)
-			}
-			if (i2c_writereg(av7110, 0x48, 0x02, 0xd0) != 1)
-				dprintk(1, "saa7113 write failed @ card %d", av7110->dvb_adapter.num);
-			break;
-		case 2:
-			dprintk(1, "switching SAA7113 to Video AV CVBS Input\n");
-			if (i2c_writereg(av7110, 0x48, 0x02, 0xd2) != 1)
-				dprintk(1, "saa7113 write failed @ card %d", av7110->dvb_adapter.num);
-			break;
-		case 3:
-			dprintk(1, "switching SAA7113 to Video AV Y/C Input\n");
-			if (i2c_writereg(av7110, 0x48, 0x02, 0xd9) != 1)
-				dprintk(1, "saa7113 write failed @ card %d", av7110->dvb_adapter.num);
-			break;
-		default:
-			dprintk(1, "switching SAA7113 to Input: AV7110: SAA7113: invalid input\n");
-		}
-	} else {
-		adswitch = 0;
-		source = SAA7146_HPS_SOURCE_PORT_A;
-		sync = SAA7146_HPS_SYNC_PORT_A;
-		memcpy(standard, dvb_standard, sizeof(struct saa7146_standard) * 2);
-		dprintk(1, "switching DVB mode\n");
-		msp_writereg(av7110, MSP_WR_DSP, 0x0008, 0x0220); // loudspeaker source
-		msp_writereg(av7110, MSP_WR_DSP, 0x0009, 0x0220); // headphone source
-		msp_writereg(av7110, MSP_WR_DSP, 0x000a, 0x0220); // SCART 1 source
-		msp_writereg(av7110, MSP_WR_DSP, 0x000e, 0x3000); // FM matrix, mono
-		msp_writereg(av7110, MSP_WR_DSP, 0x0000, 0x7f00); // loudspeaker + headphone
-		msp_writereg(av7110, MSP_WR_DSP, 0x0007, 0x7f00); // SCART 1 volume
-
-		if (av7110->analog_tuner_flags & ANALOG_TUNER_VES1820) {
-			if (ves1820_writereg(dev, 0x09, 0x0f, 0x20))
-				dprintk(1, "setting band in demodulator failed\n");
-		} else if (av7110->analog_tuner_flags & ANALOG_TUNER_STV0297) {
-			saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO); // TDA9819 pin9(STD)
-			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); // TDA9819 pin30(VIF)
-		}
-	}
-
-	/* hmm, this does not do anything!? */
-	if (av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, ADSwitch, 1, adswitch))
-		dprintk(1, "ADSwitch error\n");
-
-	saa7146_set_hps_source_and_sync(dev, source, sync);
-
-	if (vv->ov_suspend != NULL) {
-		saa7146_start_preview(vv->ov_suspend);
-		vv->ov_suspend = NULL;
-	}
-
-	return 0;
-}
-
-static int vidioc_g_tuner(struct file *file, void *fh, struct v4l2_tuner *t)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct av7110 *av7110 = (struct av7110 *)dev->ext_priv;
-	u16 stereo_det;
-	s8 stereo;
-
-	dprintk(2, "VIDIOC_G_TUNER: %d\n", t->index);
-
-	if (!av7110->analog_tuner_flags || t->index != 0)
-		return -EINVAL;
-
-	memset(t, 0, sizeof(*t));
-	strcpy((char *)t->name, "Television");
-
-	t->type = V4L2_TUNER_ANALOG_TV;
-	t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO |
-		V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP;
-	t->rangelow = 772;	/* 48.25 MHZ / 62.5 kHz = 772, see fi1216mk2-specs, page 2 */
-	t->rangehigh = 13684;	/* 855.25 MHz / 62.5 kHz = 13684 */
-	/* FIXME: add the real signal strength here */
-	t->signal = 0xffff;
-	t->afc = 0;
-
-	/* FIXME: standard / stereo detection is still broken */
-	msp_readreg(av7110, MSP_RD_DEM, 0x007e, &stereo_det);
-	dprintk(1, "VIDIOC_G_TUNER: msp3400 TV standard detection: 0x%04x\n", stereo_det);
-	msp_readreg(av7110, MSP_RD_DSP, 0x0018, &stereo_det);
-	dprintk(1, "VIDIOC_G_TUNER: msp3400 stereo detection: 0x%04x\n", stereo_det);
-	stereo = (s8)(stereo_det >> 8);
-	if (stereo > 0x10) {
-		/* stereo */
-		t->rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO;
-		t->audmode = V4L2_TUNER_MODE_STEREO;
-	} else if (stereo < -0x10) {
-		/* bilingual */
-		t->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
-		t->audmode = V4L2_TUNER_MODE_LANG1;
-	} else /* mono */
-		t->rxsubchans = V4L2_TUNER_SUB_MONO;
-
-	return 0;
-}
-
-static int vidioc_s_tuner(struct file *file, void *fh, struct v4l2_tuner *t)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct av7110 *av7110 = (struct av7110 *)dev->ext_priv;
-	u16 fm_matrix, src;
-	dprintk(2, "VIDIOC_S_TUNER: %d\n", t->index);
-
-	if (!av7110->analog_tuner_flags || av7110->current_input != 1)
-		return -EINVAL;
-
-	switch (t->audmode) {
-	case V4L2_TUNER_MODE_STEREO:
-		dprintk(2, "VIDIOC_S_TUNER: V4L2_TUNER_MODE_STEREO\n");
-		fm_matrix = 0x3001; /* stereo */
-		src = 0x0020;
-		break;
-	case V4L2_TUNER_MODE_LANG1_LANG2:
-		dprintk(2, "VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG1_LANG2\n");
-		fm_matrix = 0x3000; /* bilingual */
-		src = 0x0020;
-		break;
-	case V4L2_TUNER_MODE_LANG1:
-		dprintk(2, "VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG1\n");
-		fm_matrix = 0x3000; /* mono */
-		src = 0x0000;
-		break;
-	case V4L2_TUNER_MODE_LANG2:
-		dprintk(2, "VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG2\n");
-		fm_matrix = 0x3000; /* mono */
-		src = 0x0010;
-		break;
-	default: /* case V4L2_TUNER_MODE_MONO: */
-		dprintk(2, "VIDIOC_S_TUNER: TDA9840_SET_MONO\n");
-		fm_matrix = 0x3000; /* mono */
-		src = 0x0030;
-		break;
-	}
-	msp_writereg(av7110, MSP_WR_DSP, 0x000e, fm_matrix);
-	msp_writereg(av7110, MSP_WR_DSP, 0x0008, src);
-	msp_writereg(av7110, MSP_WR_DSP, 0x0009, src);
-	msp_writereg(av7110, MSP_WR_DSP, 0x000a, src);
-	return 0;
-}
-
-static int vidioc_g_frequency(struct file *file, void *fh, struct v4l2_frequency *f)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct av7110 *av7110 = (struct av7110 *)dev->ext_priv;
-
-	dprintk(2, "VIDIOC_G_FREQ: freq:0x%08x\n", f->frequency);
-
-	if (!av7110->analog_tuner_flags || av7110->current_input != 1)
-		return -EINVAL;
-
-	memset(f, 0, sizeof(*f));
-	f->type = V4L2_TUNER_ANALOG_TV;
-	f->frequency =	av7110->current_freq;
-	return 0;
-}
-
-static int vidioc_s_frequency(struct file *file, void *fh, struct v4l2_frequency *f)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct av7110 *av7110 = (struct av7110 *)dev->ext_priv;
-
-	dprintk(2, "VIDIOC_S_FREQUENCY: freq:0x%08x\n", f->frequency);
-
-	if (!av7110->analog_tuner_flags || av7110->current_input != 1)
-		return -EINVAL;
-
-	if (V4L2_TUNER_ANALOG_TV != f->type)
-		return -EINVAL;
-
-	msp_writereg(av7110, MSP_WR_DSP, 0x0000, 0xffe0); /* fast mute */
-	msp_writereg(av7110, MSP_WR_DSP, 0x0007, 0xffe0);
-
-	/* tune in desired frequency */
-	if (av7110->analog_tuner_flags & ANALOG_TUNER_VES1820)
-		ves1820_set_tv_freq(dev, f->frequency);
-	else if (av7110->analog_tuner_flags & ANALOG_TUNER_STV0297)
-		stv0297_set_tv_freq(dev, f->frequency);
-	av7110->current_freq = f->frequency;
-
-	msp_writereg(av7110, MSP_WR_DSP, 0x0015, 0x003f); /* start stereo detection */
-	msp_writereg(av7110, MSP_WR_DSP, 0x0015, 0x0000);
-	msp_writereg(av7110, MSP_WR_DSP, 0x0000, 0x4f00); /* loudspeaker + headphone */
-	msp_writereg(av7110, MSP_WR_DSP, 0x0007, 0x4f00); /* SCART 1 volume */
-	return 0;
-}
-
-static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct av7110 *av7110 = (struct av7110 *)dev->ext_priv;
-
-	dprintk(2, "VIDIOC_ENUMINPUT: %d\n", i->index);
-
-	if (av7110->analog_tuner_flags) {
-		if (i->index >= 4)
-			return -EINVAL;
-	} else {
-		if (i->index != 0)
-			return -EINVAL;
-	}
-
-	memcpy(i, &inputs[i->index], sizeof(struct v4l2_input));
-
-	return 0;
-}
-
-static int vidioc_g_input(struct file *file, void *fh, unsigned int *input)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct av7110 *av7110 = (struct av7110 *)dev->ext_priv;
-
-	*input = av7110->current_input;
-	dprintk(2, "VIDIOC_G_INPUT: %d\n", *input);
-	return 0;
-}
-
-static int vidioc_s_input(struct file *file, void *fh, unsigned int input)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct av7110 *av7110 = (struct av7110 *)dev->ext_priv;
-
-	dprintk(2, "VIDIOC_S_INPUT: %d\n", input);
-
-	if (!av7110->analog_tuner_flags)
-		return input ? -EINVAL : 0;
-
-	if (input >= 4)
-		return -EINVAL;
-
-	av7110->current_input = input;
-	return av7110_dvb_c_switch(fh);
-}
-
-static int vidioc_enumaudio(struct file *file, void *fh, struct v4l2_audio *a)
-{
-	dprintk(2, "VIDIOC_G_AUDIO: %d\n", a->index);
-	if (a->index != 0)
-		return -EINVAL;
-	*a = msp3400_v4l2_audio;
-	return 0;
-}
-
-static int vidioc_g_audio(struct file *file, void *fh, struct v4l2_audio *a)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct av7110 *av7110 = (struct av7110 *)dev->ext_priv;
-
-	dprintk(2, "VIDIOC_G_AUDIO: %d\n", a->index);
-	if (a->index != 0)
-		return -EINVAL;
-	if (av7110->current_input >= 2)
-		return -EINVAL;
-	*a = msp3400_v4l2_audio;
-	return 0;
-}
-
-static int vidioc_s_audio(struct file *file, void *fh, struct v4l2_audio *a)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct av7110 *av7110 = (struct av7110 *)dev->ext_priv;
-
-	dprintk(2, "VIDIOC_S_AUDIO: %d\n", a->index);
-	if (av7110->current_input >= 2)
-		return -EINVAL;
-	return a->index ? -EINVAL : 0;
-}
-
-static int vidioc_g_sliced_vbi_cap(struct file *file, void *fh,
-					struct v4l2_sliced_vbi_cap *cap)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct av7110 *av7110 = (struct av7110 *)dev->ext_priv;
-
-	dprintk(2, "VIDIOC_G_SLICED_VBI_CAP\n");
-	if (cap->type != V4L2_BUF_TYPE_SLICED_VBI_OUTPUT)
-		return -EINVAL;
-	if (FW_VERSION(av7110->arm_app) >= 0x2623) {
-		cap->service_set = V4L2_SLICED_WSS_625;
-		cap->service_lines[0][23] = V4L2_SLICED_WSS_625;
-	}
-	return 0;
-}
-
-static int vidioc_g_fmt_sliced_vbi_out(struct file *file, void *fh,
-					struct v4l2_format *f)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct av7110 *av7110 = (struct av7110 *)dev->ext_priv;
-
-	dprintk(2, "VIDIOC_G_FMT:\n");
-	if (FW_VERSION(av7110->arm_app) < 0x2623)
-		return -EINVAL;
-	memset(&f->fmt.sliced, 0, sizeof f->fmt.sliced);
-	if (av7110->wssMode) {
-		f->fmt.sliced.service_set = V4L2_SLICED_WSS_625;
-		f->fmt.sliced.service_lines[0][23] = V4L2_SLICED_WSS_625;
-		f->fmt.sliced.io_size = sizeof(struct v4l2_sliced_vbi_data);
-	}
-	return 0;
-}
-
-static int vidioc_s_fmt_sliced_vbi_out(struct file *file, void *fh,
-					struct v4l2_format *f)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct av7110 *av7110 = (struct av7110 *)dev->ext_priv;
-
-	dprintk(2, "VIDIOC_S_FMT\n");
-	if (FW_VERSION(av7110->arm_app) < 0x2623)
-		return -EINVAL;
-	if (f->fmt.sliced.service_set != V4L2_SLICED_WSS_625 &&
-	    f->fmt.sliced.service_lines[0][23] != V4L2_SLICED_WSS_625) {
-		memset(&f->fmt.sliced, 0, sizeof(f->fmt.sliced));
-		/* WSS controlled by firmware */
-		av7110->wssMode = 0;
-		av7110->wssData = 0;
-		return av7110_fw_cmd(av7110, COMTYPE_ENCODER,
-				     SetWSSConfig, 1, 0);
-	} else {
-		memset(&f->fmt.sliced, 0, sizeof(f->fmt.sliced));
-		f->fmt.sliced.service_set = V4L2_SLICED_WSS_625;
-		f->fmt.sliced.service_lines[0][23] = V4L2_SLICED_WSS_625;
-		f->fmt.sliced.io_size = sizeof(struct v4l2_sliced_vbi_data);
-		/* WSS controlled by userspace */
-		av7110->wssMode = 1;
-		av7110->wssData = 0;
-	}
-	return 0;
-}
-
-static int av7110_vbi_reset(struct file *file)
-{
-	struct saa7146_fh *fh = file->private_data;
-	struct saa7146_dev *dev = fh->dev;
-	struct av7110 *av7110 = (struct av7110*) dev->ext_priv;
-
-	dprintk(2, "%s\n", __func__);
-	av7110->wssMode = 0;
-	av7110->wssData = 0;
-	if (FW_VERSION(av7110->arm_app) < 0x2623)
-		return 0;
-	else
-		return av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetWSSConfig, 1, 0);
-}
-
-static ssize_t av7110_vbi_write(struct file *file, const char __user *data, size_t count, loff_t *ppos)
-{
-	struct saa7146_fh *fh = file->private_data;
-	struct saa7146_dev *dev = fh->dev;
-	struct av7110 *av7110 = (struct av7110*) dev->ext_priv;
-	struct v4l2_sliced_vbi_data d;
-	int rc;
-
-	dprintk(2, "%s\n", __func__);
-	if (FW_VERSION(av7110->arm_app) < 0x2623 || !av7110->wssMode || count != sizeof d)
-		return -EINVAL;
-	if (copy_from_user(&d, data, count))
-		return -EFAULT;
-	if ((d.id != 0 && d.id != V4L2_SLICED_WSS_625) || d.field != 0 || d.line != 23)
-		return -EINVAL;
-	if (d.id)
-		av7110->wssData = ((d.data[1] << 8) & 0x3f00) | d.data[0];
-	else
-		av7110->wssData = 0x8000;
-	rc = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetWSSConfig, 2, 1, av7110->wssData);
-	return (rc < 0) ? rc : count;
-}
-
-/****************************************************************************
- * INITIALIZATION
- ****************************************************************************/
-
-static u8 saa7113_init_regs[] = {
-	0x02, 0xd0,
-	0x03, 0x23,
-	0x04, 0x00,
-	0x05, 0x00,
-	0x06, 0xe9,
-	0x07, 0x0d,
-	0x08, 0x98,
-	0x09, 0x02,
-	0x0a, 0x80,
-	0x0b, 0x40,
-	0x0c, 0x40,
-	0x0d, 0x00,
-	0x0e, 0x01,
-	0x0f, 0x7c,
-	0x10, 0x48,
-	0x11, 0x0c,
-	0x12, 0x8b,
-	0x13, 0x1a,
-	0x14, 0x00,
-	0x15, 0x00,
-	0x16, 0x00,
-	0x17, 0x00,
-	0x18, 0x00,
-	0x19, 0x00,
-	0x1a, 0x00,
-	0x1b, 0x00,
-	0x1c, 0x00,
-	0x1d, 0x00,
-	0x1e, 0x00,
-
-	0x41, 0x77,
-	0x42, 0x77,
-	0x43, 0x77,
-	0x44, 0x77,
-	0x45, 0x77,
-	0x46, 0x77,
-	0x47, 0x77,
-	0x48, 0x77,
-	0x49, 0x77,
-	0x4a, 0x77,
-	0x4b, 0x77,
-	0x4c, 0x77,
-	0x4d, 0x77,
-	0x4e, 0x77,
-	0x4f, 0x77,
-	0x50, 0x77,
-	0x51, 0x77,
-	0x52, 0x77,
-	0x53, 0x77,
-	0x54, 0x77,
-	0x55, 0x77,
-	0x56, 0x77,
-	0x57, 0xff,
-
-	0xff
-};
-
-
-static struct saa7146_ext_vv av7110_vv_data_st;
-static struct saa7146_ext_vv av7110_vv_data_c;
-
-int av7110_init_analog_module(struct av7110 *av7110)
-{
-	u16 version1, version2;
-
-	if (i2c_writereg(av7110, 0x80, 0x0, 0x80) == 1 &&
-	    i2c_writereg(av7110, 0x80, 0x0, 0) == 1) {
-		pr_info("DVB-C analog module @ card %d detected, initializing MSP3400\n",
-			av7110->dvb_adapter.num);
-		av7110->adac_type = DVB_ADAC_MSP34x0;
-	} else if (i2c_writereg(av7110, 0x84, 0x0, 0x80) == 1 &&
-		   i2c_writereg(av7110, 0x84, 0x0, 0) == 1) {
-		pr_info("DVB-C analog module @ card %d detected, initializing MSP3415\n",
-			av7110->dvb_adapter.num);
-		av7110->adac_type = DVB_ADAC_MSP34x5;
-	} else
-		return -ENODEV;
-
-	msleep(100); // the probing above resets the msp...
-	msp_readreg(av7110, MSP_RD_DSP, 0x001e, &version1);
-	msp_readreg(av7110, MSP_RD_DSP, 0x001f, &version2);
-	dprintk(1, "dvb-ttpci: @ card %d MSP34xx version 0x%04x 0x%04x\n",
-		av7110->dvb_adapter.num, version1, version2);
-	msp_writereg(av7110, MSP_WR_DSP, 0x0013, 0x0c00);
-	msp_writereg(av7110, MSP_WR_DSP, 0x0000, 0x7f00); // loudspeaker + headphone
-	msp_writereg(av7110, MSP_WR_DSP, 0x0008, 0x0220); // loudspeaker source
-	msp_writereg(av7110, MSP_WR_DSP, 0x0009, 0x0220); // headphone source
-	msp_writereg(av7110, MSP_WR_DSP, 0x0004, 0x7f00); // loudspeaker volume
-	msp_writereg(av7110, MSP_WR_DSP, 0x000a, 0x0220); // SCART 1 source
-	msp_writereg(av7110, MSP_WR_DSP, 0x0007, 0x7f00); // SCART 1 volume
-	msp_writereg(av7110, MSP_WR_DSP, 0x000d, 0x1900); // prescale SCART
-
-	if (i2c_writereg(av7110, 0x48, 0x01, 0x00)!=1) {
-		pr_info("saa7113 not accessible\n");
-	} else {
-		u8 *i = saa7113_init_regs;
-
-		if ((av7110->dev->pci->subsystem_vendor == 0x110a) && (av7110->dev->pci->subsystem_device == 0x0000)) {
-			/* Fujitsu/Siemens DVB-Cable */
-			av7110->analog_tuner_flags |= ANALOG_TUNER_VES1820;
-		} else if ((av7110->dev->pci->subsystem_vendor == 0x13c2) && (av7110->dev->pci->subsystem_device == 0x0002)) {
-			/* Hauppauge/TT DVB-C premium */
-			av7110->analog_tuner_flags |= ANALOG_TUNER_VES1820;
-		} else if ((av7110->dev->pci->subsystem_vendor == 0x13c2) && (av7110->dev->pci->subsystem_device == 0x000A)) {
-			/* Hauppauge/TT DVB-C premium */
-			av7110->analog_tuner_flags |= ANALOG_TUNER_STV0297;
-		}
-
-		/* setup for DVB by default */
-		if (av7110->analog_tuner_flags & ANALOG_TUNER_VES1820) {
-			if (ves1820_writereg(av7110->dev, 0x09, 0x0f, 0x20))
-				dprintk(1, "setting band in demodulator failed\n");
-		} else if (av7110->analog_tuner_flags & ANALOG_TUNER_STV0297) {
-			saa7146_setgpio(av7110->dev, 1, SAA7146_GPIO_OUTLO); // TDA9819 pin9(STD)
-			saa7146_setgpio(av7110->dev, 3, SAA7146_GPIO_OUTLO); // TDA9819 pin30(VIF)
-		}
-
-		/* init the saa7113 */
-		while (*i != 0xff) {
-			if (i2c_writereg(av7110, 0x48, i[0], i[1]) != 1) {
-				dprintk(1, "saa7113 initialization failed @ card %d", av7110->dvb_adapter.num);
-				break;
-			}
-			i += 2;
-		}
-		/* setup msp for analog sound: B/G Dual-FM */
-		msp_writereg(av7110, MSP_WR_DEM, 0x00bb, 0x02d0); // AD_CV
-		msp_writereg(av7110, MSP_WR_DEM, 0x0001,  3); // FIR1
-		msp_writereg(av7110, MSP_WR_DEM, 0x0001, 18); // FIR1
-		msp_writereg(av7110, MSP_WR_DEM, 0x0001, 27); // FIR1
-		msp_writereg(av7110, MSP_WR_DEM, 0x0001, 48); // FIR1
-		msp_writereg(av7110, MSP_WR_DEM, 0x0001, 66); // FIR1
-		msp_writereg(av7110, MSP_WR_DEM, 0x0001, 72); // FIR1
-		msp_writereg(av7110, MSP_WR_DEM, 0x0005,  4); // FIR2
-		msp_writereg(av7110, MSP_WR_DEM, 0x0005, 64); // FIR2
-		msp_writereg(av7110, MSP_WR_DEM, 0x0005,  0); // FIR2
-		msp_writereg(av7110, MSP_WR_DEM, 0x0005,  3); // FIR2
-		msp_writereg(av7110, MSP_WR_DEM, 0x0005, 18); // FIR2
-		msp_writereg(av7110, MSP_WR_DEM, 0x0005, 27); // FIR2
-		msp_writereg(av7110, MSP_WR_DEM, 0x0005, 48); // FIR2
-		msp_writereg(av7110, MSP_WR_DEM, 0x0005, 66); // FIR2
-		msp_writereg(av7110, MSP_WR_DEM, 0x0005, 72); // FIR2
-		msp_writereg(av7110, MSP_WR_DEM, 0x0083, 0xa000); // MODE_REG
-		msp_writereg(av7110, MSP_WR_DEM, 0x0093, 0x00aa); // DCO1_LO 5.74MHz
-		msp_writereg(av7110, MSP_WR_DEM, 0x009b, 0x04fc); // DCO1_HI
-		msp_writereg(av7110, MSP_WR_DEM, 0x00a3, 0x038e); // DCO2_LO 5.5MHz
-		msp_writereg(av7110, MSP_WR_DEM, 0x00ab, 0x04c6); // DCO2_HI
-		msp_writereg(av7110, MSP_WR_DEM, 0x0056, 0); // LOAD_REG 1/2
-	}
-
-	memcpy(standard, dvb_standard, sizeof(struct saa7146_standard) * 2);
-	/* set dd1 stream a & b */
-	saa7146_write(av7110->dev, DD1_STREAM_B, 0x00000000);
-	saa7146_write(av7110->dev, DD1_INIT, 0x03000700);
-	saa7146_write(av7110->dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
-
-	return 0;
-}
-
-int av7110_init_v4l(struct av7110 *av7110)
-{
-	struct saa7146_dev* dev = av7110->dev;
-	struct saa7146_ext_vv *vv_data;
-	int ret;
-
-	/* special case DVB-C: these cards have an analog tuner
-	   plus need some special handling, so we have separate
-	   saa7146_ext_vv data for these... */
-	if (av7110->analog_tuner_flags)
-		vv_data = &av7110_vv_data_c;
-	else
-		vv_data = &av7110_vv_data_st;
-	ret = saa7146_vv_init(dev, vv_data);
-
-	if (ret) {
-		ERR("cannot init capture device. skipping\n");
-		return -ENODEV;
-	}
-	vv_data->vid_ops.vidioc_enum_input = vidioc_enum_input;
-	vv_data->vid_ops.vidioc_g_input = vidioc_g_input;
-	vv_data->vid_ops.vidioc_s_input = vidioc_s_input;
-	vv_data->vid_ops.vidioc_g_tuner = vidioc_g_tuner;
-	vv_data->vid_ops.vidioc_s_tuner = vidioc_s_tuner;
-	vv_data->vid_ops.vidioc_g_frequency = vidioc_g_frequency;
-	vv_data->vid_ops.vidioc_s_frequency = vidioc_s_frequency;
-	vv_data->vid_ops.vidioc_enumaudio = vidioc_enumaudio;
-	vv_data->vid_ops.vidioc_g_audio = vidioc_g_audio;
-	vv_data->vid_ops.vidioc_s_audio = vidioc_s_audio;
-	vv_data->vid_ops.vidioc_g_fmt_vbi_cap = NULL;
-
-	vv_data->vbi_ops.vidioc_g_tuner = vidioc_g_tuner;
-	vv_data->vbi_ops.vidioc_s_tuner = vidioc_s_tuner;
-	vv_data->vbi_ops.vidioc_g_frequency = vidioc_g_frequency;
-	vv_data->vbi_ops.vidioc_s_frequency = vidioc_s_frequency;
-	vv_data->vbi_ops.vidioc_g_fmt_vbi_cap = NULL;
-	vv_data->vbi_ops.vidioc_g_sliced_vbi_cap = vidioc_g_sliced_vbi_cap;
-	vv_data->vbi_ops.vidioc_g_fmt_sliced_vbi_out = vidioc_g_fmt_sliced_vbi_out;
-	vv_data->vbi_ops.vidioc_s_fmt_sliced_vbi_out = vidioc_s_fmt_sliced_vbi_out;
-
-	if (FW_VERSION(av7110->arm_app) < 0x2623)
-		vv_data->capabilities &= ~V4L2_CAP_SLICED_VBI_OUTPUT;
-
-	if (saa7146_register_device(&av7110->v4l_dev, dev, "av7110", VFL_TYPE_GRABBER)) {
-		ERR("cannot register capture device. skipping\n");
-		saa7146_vv_release(dev);
-		return -ENODEV;
-	}
-	if (FW_VERSION(av7110->arm_app) >= 0x2623) {
-		if (saa7146_register_device(&av7110->vbi_dev, dev, "av7110", VFL_TYPE_VBI))
-			ERR("cannot register vbi v4l2 device. skipping\n");
-	}
-	return 0;
-}
-
-int av7110_exit_v4l(struct av7110 *av7110)
-{
-	struct saa7146_dev* dev = av7110->dev;
-
-	saa7146_unregister_device(&av7110->v4l_dev, av7110->dev);
-	saa7146_unregister_device(&av7110->vbi_dev, av7110->dev);
-
-	saa7146_vv_release(dev);
-
-	return 0;
-}
-
-
-
-/* FIXME: these values are experimental values that look better than the
-   values from the latest "official" driver -- at least for me... (MiHu) */
-static struct saa7146_standard standard[] = {
-	{
-		.name	= "PAL",	.id		= V4L2_STD_PAL_BG,
-		.v_offset	= 0x15,	.v_field	= 288,
-		.h_offset	= 0x48,	.h_pixels	= 708,
-		.v_max_out	= 576,	.h_max_out	= 768,
-	}, {
-		.name	= "NTSC",	.id		= V4L2_STD_NTSC,
-		.v_offset	= 0x10,	.v_field	= 244,
-		.h_offset	= 0x40,	.h_pixels	= 708,
-		.v_max_out	= 480,	.h_max_out	= 640,
-	}
-};
-
-static struct saa7146_standard analog_standard[] = {
-	{
-		.name	= "PAL",	.id		= V4L2_STD_PAL_BG,
-		.v_offset	= 0x1b,	.v_field	= 288,
-		.h_offset	= 0x08,	.h_pixels	= 708,
-		.v_max_out	= 576,	.h_max_out	= 768,
-	}, {
-		.name	= "NTSC",	.id		= V4L2_STD_NTSC,
-		.v_offset	= 0x10,	.v_field	= 244,
-		.h_offset	= 0x40,	.h_pixels	= 708,
-		.v_max_out	= 480,	.h_max_out	= 640,
-	}
-};
-
-static struct saa7146_standard dvb_standard[] = {
-	{
-		.name	= "PAL",	.id		= V4L2_STD_PAL_BG,
-		.v_offset	= 0x14,	.v_field	= 288,
-		.h_offset	= 0x48,	.h_pixels	= 708,
-		.v_max_out	= 576,	.h_max_out	= 768,
-	}, {
-		.name	= "NTSC",	.id		= V4L2_STD_NTSC,
-		.v_offset	= 0x10,	.v_field	= 244,
-		.h_offset	= 0x40,	.h_pixels	= 708,
-		.v_max_out	= 480,	.h_max_out	= 640,
-	}
-};
-
-static int std_callback(struct saa7146_dev* dev, struct saa7146_standard *std)
-{
-	struct av7110 *av7110 = (struct av7110*) dev->ext_priv;
-
-	if (std->id & V4L2_STD_PAL) {
-		av7110->vidmode = AV7110_VIDEO_MODE_PAL;
-		av7110_set_vidmode(av7110, av7110->vidmode);
-	}
-	else if (std->id & V4L2_STD_NTSC) {
-		av7110->vidmode = AV7110_VIDEO_MODE_NTSC;
-		av7110_set_vidmode(av7110, av7110->vidmode);
-	}
-	else
-		return -1;
-
-	return 0;
-}
-
-
-static struct saa7146_ext_vv av7110_vv_data_st = {
-	.inputs		= 1,
-	.audios		= 1,
-	.capabilities	= V4L2_CAP_SLICED_VBI_OUTPUT | V4L2_CAP_AUDIO,
-	.flags		= 0,
-
-	.stds		= &standard[0],
-	.num_stds	= ARRAY_SIZE(standard),
-	.std_callback	= &std_callback,
-
-	.vbi_fops.open	= av7110_vbi_reset,
-	.vbi_fops.release = av7110_vbi_reset,
-	.vbi_fops.write	= av7110_vbi_write,
-};
-
-static struct saa7146_ext_vv av7110_vv_data_c = {
-	.inputs		= 1,
-	.audios		= 1,
-	.capabilities	= V4L2_CAP_TUNER | V4L2_CAP_SLICED_VBI_OUTPUT | V4L2_CAP_AUDIO,
-	.flags		= SAA7146_USE_PORT_B_FOR_VBI,
-
-	.stds		= &standard[0],
-	.num_stds	= ARRAY_SIZE(standard),
-	.std_callback	= &std_callback,
-
-	.vbi_fops.open	= av7110_vbi_reset,
-	.vbi_fops.release = av7110_vbi_reset,
-	.vbi_fops.write	= av7110_vbi_write,
-};
-
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
deleted file mode 100644
index 12ddb53..0000000
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ /dev/null
@@ -1,1640 +0,0 @@
-/*
- * budget-av.c: driver for the SAA7146 based Budget DVB cards
- *              with analog video in
- *
- * Compiled from various sources by Michael Hunold <michael@mihu.de>
- *
- * CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> &
- *                               Andrew de Quincey <adq_dvb@lidskialf.net>
- *
- * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
- *
- * Copyright (C) 1999-2002 Ralph  Metzler
- *                       & Marcus Metzler for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org/ 
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include "budget.h"
-#include "stv0299.h"
-#include "stb0899_drv.h"
-#include "stb0899_reg.h"
-#include "stb0899_cfg.h"
-#include "tda8261.h"
-#include "tda8261_cfg.h"
-#include "tda1002x.h"
-#include "tda1004x.h"
-#include "tua6100.h"
-#include "dvb-pll.h"
-#include <media/saa7146_vv.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/spinlock.h>
-
-#include "dvb_ca_en50221.h"
-
-#define DEBICICAM		0x02420000
-
-#define SLOTSTATUS_NONE         1
-#define SLOTSTATUS_PRESENT      2
-#define SLOTSTATUS_RESET        4
-#define SLOTSTATUS_READY        8
-#define SLOTSTATUS_OCCUPIED     (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY)
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-struct budget_av {
-	struct budget budget;
-	struct video_device *vd;
-	int cur_input;
-	int has_saa7113;
-	struct tasklet_struct ciintf_irq_tasklet;
-	int slot_status;
-	struct dvb_ca_en50221 ca;
-	u8 reinitialise_demod:1;
-};
-
-static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot);
-
-
-/* GPIO Connections:
- * 0 - Vcc/Reset (Reset is controlled by capacitor). Resets the frontend *AS WELL*!
- * 1 - CI memory select 0=>IO memory, 1=>Attribute Memory
- * 2 - CI Card Enable (Active Low)
- * 3 - CI Card Detect
- */
-
-/****************************************************************************
- * INITIALIZATION
- ****************************************************************************/
-
-static u8 i2c_readreg(struct i2c_adapter *i2c, u8 id, u8 reg)
-{
-	u8 mm1[] = { 0x00 };
-	u8 mm2[] = { 0x00 };
-	struct i2c_msg msgs[2];
-
-	msgs[0].flags = 0;
-	msgs[1].flags = I2C_M_RD;
-	msgs[0].addr = msgs[1].addr = id / 2;
-	mm1[0] = reg;
-	msgs[0].len = 1;
-	msgs[1].len = 1;
-	msgs[0].buf = mm1;
-	msgs[1].buf = mm2;
-
-	i2c_transfer(i2c, msgs, 2);
-
-	return mm2[0];
-}
-
-static int i2c_readregs(struct i2c_adapter *i2c, u8 id, u8 reg, u8 * buf, u8 len)
-{
-	u8 mm1[] = { reg };
-	struct i2c_msg msgs[2] = {
-		{.addr = id / 2,.flags = 0,.buf = mm1,.len = 1},
-		{.addr = id / 2,.flags = I2C_M_RD,.buf = buf,.len = len}
-	};
-
-	if (i2c_transfer(i2c, msgs, 2) != 2)
-		return -EIO;
-
-	return 0;
-}
-
-static int i2c_writereg(struct i2c_adapter *i2c, u8 id, u8 reg, u8 val)
-{
-	u8 msg[2] = { reg, val };
-	struct i2c_msg msgs;
-
-	msgs.flags = 0;
-	msgs.addr = id / 2;
-	msgs.len = 2;
-	msgs.buf = msg;
-	return i2c_transfer(i2c, &msgs, 1);
-}
-
-static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
-{
-	struct budget_av *budget_av = (struct budget_av *) ca->data;
-	int result;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
-	udelay(1);
-
-	result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 1);
-	if (result == -ETIMEDOUT) {
-		ciintf_slot_shutdown(ca, slot);
-		pr_info("cam ejected 1\n");
-	}
-	return result;
-}
-
-static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value)
-{
-	struct budget_av *budget_av = (struct budget_av *) ca->data;
-	int result;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
-	udelay(1);
-
-	result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 1);
-	if (result == -ETIMEDOUT) {
-		ciintf_slot_shutdown(ca, slot);
-		pr_info("cam ejected 2\n");
-	}
-	return result;
-}
-
-static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address)
-{
-	struct budget_av *budget_av = (struct budget_av *) ca->data;
-	int result;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
-	udelay(1);
-
-	result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0);
-	if (result == -ETIMEDOUT) {
-		ciintf_slot_shutdown(ca, slot);
-		pr_info("cam ejected 3\n");
-		return -ETIMEDOUT;
-	}
-	return result;
-}
-
-static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value)
-{
-	struct budget_av *budget_av = (struct budget_av *) ca->data;
-	int result;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
-	udelay(1);
-
-	result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0);
-	if (result == -ETIMEDOUT) {
-		ciintf_slot_shutdown(ca, slot);
-		pr_info("cam ejected 5\n");
-	}
-	return result;
-}
-
-static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
-{
-	struct budget_av *budget_av = (struct budget_av *) ca->data;
-	struct saa7146_dev *saa = budget_av->budget.dev;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	dprintk(1, "ciintf_slot_reset\n");
-	budget_av->slot_status = SLOTSTATUS_RESET;
-
-	saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
-
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
-	msleep(2);
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); /* Vcc on */
-	msleep(20); /* 20 ms Vcc settling time */
-
-	saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */
-	ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
-	msleep(20);
-
-	/* reinitialise the frontend if necessary */
-	if (budget_av->reinitialise_demod)
-		dvb_frontend_reinitialise(budget_av->budget.dvb_frontend);
-
-	return 0;
-}
-
-static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
-{
-	struct budget_av *budget_av = (struct budget_av *) ca->data;
-	struct saa7146_dev *saa = budget_av->budget.dev;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	dprintk(1, "ciintf_slot_shutdown\n");
-
-	ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
-	budget_av->slot_status = SLOTSTATUS_NONE;
-
-	return 0;
-}
-
-static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
-{
-	struct budget_av *budget_av = (struct budget_av *) ca->data;
-	struct saa7146_dev *saa = budget_av->budget.dev;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status);
-
-	ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
-
-	return 0;
-}
-
-static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
-{
-	struct budget_av *budget_av = (struct budget_av *) ca->data;
-	struct saa7146_dev *saa = budget_av->budget.dev;
-	int result;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	/* test the card detect line - needs to be done carefully
-	 * since it never goes high for some CAMs on this interface (e.g. topuptv) */
-	if (budget_av->slot_status == SLOTSTATUS_NONE) {
-		saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
-		udelay(1);
-		if (saa7146_read(saa, PSR) & MASK_06) {
-			if (budget_av->slot_status == SLOTSTATUS_NONE) {
-				budget_av->slot_status = SLOTSTATUS_PRESENT;
-				pr_info("cam inserted A\n");
-			}
-		}
-		saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
-	}
-
-	/* We also try and read from IO memory to work round the above detection bug. If
-	 * there is no CAM, we will get a timeout. Only done if there is no cam
-	 * present, since this test actually breaks some cams :(
-	 *
-	 * if the CI interface is not open, we also do the above test since we
-	 * don't care if the cam has problems - we'll be resetting it on open() anyway */
-	if ((budget_av->slot_status == SLOTSTATUS_NONE) || (!open)) {
-		saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
-		result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1);
-		if ((result >= 0) && (budget_av->slot_status == SLOTSTATUS_NONE)) {
-			budget_av->slot_status = SLOTSTATUS_PRESENT;
-			pr_info("cam inserted B\n");
-		} else if (result < 0) {
-			if (budget_av->slot_status != SLOTSTATUS_NONE) {
-				ciintf_slot_shutdown(ca, slot);
-				pr_info("cam ejected 5\n");
-				return 0;
-			}
-		}
-	}
-
-	/* read from attribute memory in reset/ready state to know when the CAM is ready */
-	if (budget_av->slot_status == SLOTSTATUS_RESET) {
-		result = ciintf_read_attribute_mem(ca, slot, 0);
-		if (result == 0x1d) {
-			budget_av->slot_status = SLOTSTATUS_READY;
-		}
-	}
-
-	/* work out correct return code */
-	if (budget_av->slot_status != SLOTSTATUS_NONE) {
-		if (budget_av->slot_status & SLOTSTATUS_READY) {
-			return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
-		}
-		return DVB_CA_EN50221_POLL_CAM_PRESENT;
-	}
-	return 0;
-}
-
-static int ciintf_init(struct budget_av *budget_av)
-{
-	struct saa7146_dev *saa = budget_av->budget.dev;
-	int result;
-
-	memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221));
-
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
-	saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO);
-	saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO);
-	saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
-
-	/* Enable DEBI pins */
-	saa7146_write(saa, MC1, MASK_27 | MASK_11);
-
-	/* register CI interface */
-	budget_av->ca.owner = THIS_MODULE;
-	budget_av->ca.read_attribute_mem = ciintf_read_attribute_mem;
-	budget_av->ca.write_attribute_mem = ciintf_write_attribute_mem;
-	budget_av->ca.read_cam_control = ciintf_read_cam_control;
-	budget_av->ca.write_cam_control = ciintf_write_cam_control;
-	budget_av->ca.slot_reset = ciintf_slot_reset;
-	budget_av->ca.slot_shutdown = ciintf_slot_shutdown;
-	budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable;
-	budget_av->ca.poll_slot_status = ciintf_poll_slot_status;
-	budget_av->ca.data = budget_av;
-	budget_av->budget.ci_present = 1;
-	budget_av->slot_status = SLOTSTATUS_NONE;
-
-	if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter,
-					  &budget_av->ca, 0, 1)) != 0) {
-		pr_err("ci initialisation failed\n");
-		goto error;
-	}
-
-	pr_info("ci interface initialised\n");
-	return 0;
-
-error:
-	saa7146_write(saa, MC1, MASK_27);
-	return result;
-}
-
-static void ciintf_deinit(struct budget_av *budget_av)
-{
-	struct saa7146_dev *saa = budget_av->budget.dev;
-
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
-	saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT);
-	saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT);
-	saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
-
-	/* release the CA device */
-	dvb_ca_en50221_release(&budget_av->ca);
-
-	/* disable DEBI pins */
-	saa7146_write(saa, MC1, MASK_27);
-}
-
-
-static const u8 saa7113_tab[] = {
-	0x01, 0x08,
-	0x02, 0xc0,
-	0x03, 0x33,
-	0x04, 0x00,
-	0x05, 0x00,
-	0x06, 0xeb,
-	0x07, 0xe0,
-	0x08, 0x28,
-	0x09, 0x00,
-	0x0a, 0x80,
-	0x0b, 0x47,
-	0x0c, 0x40,
-	0x0d, 0x00,
-	0x0e, 0x01,
-	0x0f, 0x44,
-
-	0x10, 0x08,
-	0x11, 0x0c,
-	0x12, 0x7b,
-	0x13, 0x00,
-	0x15, 0x00, 0x16, 0x00, 0x17, 0x00,
-
-	0x57, 0xff,
-	0x40, 0x82, 0x58, 0x00, 0x59, 0x54, 0x5a, 0x07,
-	0x5b, 0x83, 0x5e, 0x00,
-	0xff
-};
-
-static int saa7113_init(struct budget_av *budget_av)
-{
-	struct budget *budget = &budget_av->budget;
-	struct saa7146_dev *saa = budget->dev;
-	const u8 *data = saa7113_tab;
-
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
-	msleep(200);
-
-	if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) {
-		dprintk(1, "saa7113 not found on KNC card\n");
-		return -ENODEV;
-	}
-
-	dprintk(1, "saa7113 detected and initializing\n");
-
-	while (*data != 0xff) {
-		i2c_writereg(&budget->i2c_adap, 0x4a, *data, *(data + 1));
-		data += 2;
-	}
-
-	dprintk(1, "saa7113  status=%02x\n", i2c_readreg(&budget->i2c_adap, 0x4a, 0x1f));
-
-	return 0;
-}
-
-static int saa7113_setinput(struct budget_av *budget_av, int input)
-{
-	struct budget *budget = &budget_av->budget;
-
-	if (1 != budget_av->has_saa7113)
-		return -ENODEV;
-
-	if (input == 1) {
-		i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc7);
-		i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x80);
-	} else if (input == 0) {
-		i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc0);
-		i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x00);
-	} else
-		return -EINVAL;
-
-	budget_av->cur_input = input;
-	return 0;
-}
-
-
-static int philips_su1278_ty_ci_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
-{
-	u8 aclk = 0;
-	u8 bclk = 0;
-	u8 m1;
-
-	aclk = 0xb5;
-	if (srate < 2000000)
-		bclk = 0x86;
-	else if (srate < 5000000)
-		bclk = 0x89;
-	else if (srate < 15000000)
-		bclk = 0x8f;
-	else if (srate < 45000000)
-		bclk = 0x95;
-
-	m1 = 0x14;
-	if (srate < 4000000)
-		m1 = 0x10;
-
-	stv0299_writereg(fe, 0x13, aclk);
-	stv0299_writereg(fe, 0x14, bclk);
-	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
-	stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
-	stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
-	stv0299_writereg(fe, 0x0f, 0x80 | m1);
-
-	return 0;
-}
-
-static int philips_su1278_ty_ci_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	u32 div;
-	u8 buf[4];
-	struct budget *budget = (struct budget *) fe->dvb->priv;
-	struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
-
-	if ((c->frequency < 950000) || (c->frequency > 2150000))
-		return -EINVAL;
-
-	div = (c->frequency + (125 - 1)) / 125;	/* round correctly */
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = div & 0xff;
-	buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
-	buf[3] = 0x20;
-
-	if (c->symbol_rate < 4000000)
-		buf[3] |= 1;
-
-	if (c->frequency < 1250000)
-		buf[3] |= 0;
-	else if (c->frequency < 1550000)
-		buf[3] |= 0x40;
-	else if (c->frequency < 2050000)
-		buf[3] |= 0x80;
-	else if (c->frequency < 2150000)
-		buf[3] |= 0xC0;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
-		return -EIO;
-	return 0;
-}
-
-static u8 typhoon_cinergy1200s_inittab[] = {
-	0x01, 0x15,
-	0x02, 0x30,
-	0x03, 0x00,
-	0x04, 0x7d,		/* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
-	0x05, 0x35,		/* I2CT = 0, SCLT = 1, SDAT = 1 */
-	0x06, 0x40,		/* DAC not used, set to high impendance mode */
-	0x07, 0x00,		/* DAC LSB */
-	0x08, 0x40,		/* DiSEqC off */
-	0x09, 0x00,		/* FIFO */
-	0x0c, 0x51,		/* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
-	0x0d, 0x82,		/* DC offset compensation = ON, beta_agc1 = 2 */
-	0x0e, 0x23,		/* alpha_tmg = 2, beta_tmg = 3 */
-	0x10, 0x3f,		// AGC2  0x3d
-	0x11, 0x84,
-	0x12, 0xb9,
-	0x15, 0xc9,		// lock detector threshold
-	0x16, 0x00,
-	0x17, 0x00,
-	0x18, 0x00,
-	0x19, 0x00,
-	0x1a, 0x00,
-	0x1f, 0x50,
-	0x20, 0x00,
-	0x21, 0x00,
-	0x22, 0x00,
-	0x23, 0x00,
-	0x28, 0x00,		// out imp: normal  out type: parallel FEC mode:0
-	0x29, 0x1e,		// 1/2 threshold
-	0x2a, 0x14,		// 2/3 threshold
-	0x2b, 0x0f,		// 3/4 threshold
-	0x2c, 0x09,		// 5/6 threshold
-	0x2d, 0x05,		// 7/8 threshold
-	0x2e, 0x01,
-	0x31, 0x1f,		// test all FECs
-	0x32, 0x19,		// viterbi and synchro search
-	0x33, 0xfc,		// rs control
-	0x34, 0x93,		// error control
-	0x0f, 0x92,
-	0xff, 0xff
-};
-
-static struct stv0299_config typhoon_config = {
-	.demod_address = 0x68,
-	.inittab = typhoon_cinergy1200s_inittab,
-	.mclk = 88000000UL,
-	.invert = 0,
-	.skip_reinit = 0,
-	.lock_output = STV0299_LOCKOUTPUT_1,
-	.volt13_op0_op1 = STV0299_VOLT13_OP0,
-	.min_delay_ms = 100,
-	.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
-};
-
-
-static struct stv0299_config cinergy_1200s_config = {
-	.demod_address = 0x68,
-	.inittab = typhoon_cinergy1200s_inittab,
-	.mclk = 88000000UL,
-	.invert = 0,
-	.skip_reinit = 0,
-	.lock_output = STV0299_LOCKOUTPUT_0,
-	.volt13_op0_op1 = STV0299_VOLT13_OP0,
-	.min_delay_ms = 100,
-	.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
-};
-
-static struct stv0299_config cinergy_1200s_1894_0010_config = {
-	.demod_address = 0x68,
-	.inittab = typhoon_cinergy1200s_inittab,
-	.mclk = 88000000UL,
-	.invert = 1,
-	.skip_reinit = 0,
-	.lock_output = STV0299_LOCKOUTPUT_1,
-	.volt13_op0_op1 = STV0299_VOLT13_OP0,
-	.min_delay_ms = 100,
-	.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
-};
-
-static int philips_cu1216_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct budget *budget = (struct budget *) fe->dvb->priv;
-	u8 buf[6];
-	struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) };
-	int i;
-
-#define CU1216_IF 36125000
-#define TUNER_MUL 62500
-
-	u32 div = (c->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
-
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = div & 0xff;
-	buf[2] = 0xce;
-	buf[3] = (c->frequency < 150000000 ? 0x01 :
-		  c->frequency < 445000000 ? 0x02 : 0x04);
-	buf[4] = 0xde;
-	buf[5] = 0x20;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
-		return -EIO;
-
-	/* wait for the pll lock */
-	msg.flags = I2C_M_RD;
-	msg.len = 1;
-	for (i = 0; i < 20; i++) {
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 1);
-		if (i2c_transfer(&budget->i2c_adap, &msg, 1) == 1 && (buf[0] & 0x40))
-			break;
-		msleep(10);
-	}
-
-	/* switch the charge pump to the lower current */
-	msg.flags = 0;
-	msg.len = 2;
-	msg.buf = &buf[2];
-	buf[2] &= ~0x40;
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
-		return -EIO;
-
-	return 0;
-}
-
-static struct tda1002x_config philips_cu1216_config = {
-	.demod_address = 0x0c,
-	.invert = 1,
-};
-
-static struct tda1002x_config philips_cu1216_config_altaddress = {
-	.demod_address = 0x0d,
-	.invert = 0,
-};
-
-static struct tda10023_config philips_cu1216_tda10023_config = {
-	.demod_address = 0x0c,
-	.invert = 1,
-};
-
-static int philips_tu1216_tuner_init(struct dvb_frontend *fe)
-{
-	struct budget *budget = (struct budget *) fe->dvb->priv;
-	static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
-	struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
-
-	// setup PLL configuration
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
-		return -EIO;
-	msleep(1);
-
-	return 0;
-}
-
-static int philips_tu1216_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct budget *budget = (struct budget *) fe->dvb->priv;
-	u8 tuner_buf[4];
-	struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,.len =
-			sizeof(tuner_buf) };
-	int tuner_frequency = 0;
-	u8 band, cp, filter;
-
-	// determine charge pump
-	tuner_frequency = c->frequency + 36166000;
-	if (tuner_frequency < 87000000)
-		return -EINVAL;
-	else if (tuner_frequency < 130000000)
-		cp = 3;
-	else if (tuner_frequency < 160000000)
-		cp = 5;
-	else if (tuner_frequency < 200000000)
-		cp = 6;
-	else if (tuner_frequency < 290000000)
-		cp = 3;
-	else if (tuner_frequency < 420000000)
-		cp = 5;
-	else if (tuner_frequency < 480000000)
-		cp = 6;
-	else if (tuner_frequency < 620000000)
-		cp = 3;
-	else if (tuner_frequency < 830000000)
-		cp = 5;
-	else if (tuner_frequency < 895000000)
-		cp = 7;
-	else
-		return -EINVAL;
-
-	// determine band
-	if (c->frequency < 49000000)
-		return -EINVAL;
-	else if (c->frequency < 161000000)
-		band = 1;
-	else if (c->frequency < 444000000)
-		band = 2;
-	else if (c->frequency < 861000000)
-		band = 4;
-	else
-		return -EINVAL;
-
-	// setup PLL filter
-	switch (c->bandwidth_hz) {
-	case 6000000:
-		filter = 0;
-		break;
-
-	case 7000000:
-		filter = 0;
-		break;
-
-	case 8000000:
-		filter = 1;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	// calculate divisor
-	// ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
-	tuner_frequency = (((c->frequency / 1000) * 6) + 217496) / 1000;
-
-	// setup tuner buffer
-	tuner_buf[0] = (tuner_frequency >> 8) & 0x7f;
-	tuner_buf[1] = tuner_frequency & 0xff;
-	tuner_buf[2] = 0xca;
-	tuner_buf[3] = (cp << 5) | (filter << 3) | band;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
-		return -EIO;
-
-	msleep(1);
-	return 0;
-}
-
-static int philips_tu1216_request_firmware(struct dvb_frontend *fe,
-					   const struct firmware **fw, char *name)
-{
-	struct budget *budget = (struct budget *) fe->dvb->priv;
-
-	return request_firmware(fw, name, &budget->dev->pci->dev);
-}
-
-static struct tda1004x_config philips_tu1216_config = {
-
-	.demod_address = 0x8,
-	.invert = 1,
-	.invert_oclk = 1,
-	.xtal_freq = TDA10046_XTAL_4M,
-	.agc_config = TDA10046_AGC_DEFAULT,
-	.if_freq = TDA10046_FREQ_3617,
-	.request_firmware = philips_tu1216_request_firmware,
-};
-
-static u8 philips_sd1878_inittab[] = {
-	0x01, 0x15,
-	0x02, 0x30,
-	0x03, 0x00,
-	0x04, 0x7d,
-	0x05, 0x35,
-	0x06, 0x40,
-	0x07, 0x00,
-	0x08, 0x43,
-	0x09, 0x02,
-	0x0C, 0x51,
-	0x0D, 0x82,
-	0x0E, 0x23,
-	0x10, 0x3f,
-	0x11, 0x84,
-	0x12, 0xb9,
-	0x15, 0xc9,
-	0x16, 0x19,
-	0x17, 0x8c,
-	0x18, 0x59,
-	0x19, 0xf8,
-	0x1a, 0xfe,
-	0x1c, 0x7f,
-	0x1d, 0x00,
-	0x1e, 0x00,
-	0x1f, 0x50,
-	0x20, 0x00,
-	0x21, 0x00,
-	0x22, 0x00,
-	0x23, 0x00,
-	0x28, 0x00,
-	0x29, 0x28,
-	0x2a, 0x14,
-	0x2b, 0x0f,
-	0x2c, 0x09,
-	0x2d, 0x09,
-	0x31, 0x1f,
-	0x32, 0x19,
-	0x33, 0xfc,
-	0x34, 0x93,
-	0xff, 0xff
-};
-
-static int philips_sd1878_ci_set_symbol_rate(struct dvb_frontend *fe,
-		u32 srate, u32 ratio)
-{
-	u8 aclk = 0;
-	u8 bclk = 0;
-	u8 m1;
-
-	aclk = 0xb5;
-	if (srate < 2000000)
-		bclk = 0x86;
-	else if (srate < 5000000)
-		bclk = 0x89;
-	else if (srate < 15000000)
-		bclk = 0x8f;
-	else if (srate < 45000000)
-		bclk = 0x95;
-
-	m1 = 0x14;
-	if (srate < 4000000)
-		m1 = 0x10;
-
-	stv0299_writereg(fe, 0x0e, 0x23);
-	stv0299_writereg(fe, 0x0f, 0x94);
-	stv0299_writereg(fe, 0x10, 0x39);
-	stv0299_writereg(fe, 0x13, aclk);
-	stv0299_writereg(fe, 0x14, bclk);
-	stv0299_writereg(fe, 0x15, 0xc9);
-	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
-	stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
-	stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
-	stv0299_writereg(fe, 0x0f, 0x80 | m1);
-
-	return 0;
-}
-
-static struct stv0299_config philips_sd1878_config = {
-	.demod_address = 0x68,
-     .inittab = philips_sd1878_inittab,
-	.mclk = 88000000UL,
-	.invert = 0,
-	.skip_reinit = 0,
-	.lock_output = STV0299_LOCKOUTPUT_1,
-	.volt13_op0_op1 = STV0299_VOLT13_OP0,
-	.min_delay_ms = 100,
-	.set_symbol_rate = philips_sd1878_ci_set_symbol_rate,
-};
-
-/* KNC1 DVB-S (STB0899) Inittab	*/
-static const struct stb0899_s1_reg knc1_stb0899_s1_init_1[] = {
-
-	{ STB0899_DEV_ID		, 0x81 },
-	{ STB0899_DISCNTRL1		, 0x32 },
-	{ STB0899_DISCNTRL2		, 0x80 },
-	{ STB0899_DISRX_ST0		, 0x04 },
-	{ STB0899_DISRX_ST1		, 0x00 },
-	{ STB0899_DISPARITY		, 0x00 },
-	{ STB0899_DISSTATUS		, 0x20 },
-	{ STB0899_DISF22		, 0x8c },
-	{ STB0899_DISF22RX		, 0x9a },
-	{ STB0899_SYSREG		, 0x0b },
-	{ STB0899_ACRPRESC		, 0x11 },
-	{ STB0899_ACRDIV1		, 0x0a },
-	{ STB0899_ACRDIV2		, 0x05 },
-	{ STB0899_DACR1			, 0x00 },
-	{ STB0899_DACR2			, 0x00 },
-	{ STB0899_OUTCFG		, 0x00 },
-	{ STB0899_MODECFG		, 0x00 },
-	{ STB0899_IRQSTATUS_3		, 0x30 },
-	{ STB0899_IRQSTATUS_2		, 0x00 },
-	{ STB0899_IRQSTATUS_1		, 0x00 },
-	{ STB0899_IRQSTATUS_0		, 0x00 },
-	{ STB0899_IRQMSK_3		, 0xf3 },
-	{ STB0899_IRQMSK_2		, 0xfc },
-	{ STB0899_IRQMSK_1		, 0xff },
-	{ STB0899_IRQMSK_0		, 0xff },
-	{ STB0899_IRQCFG		, 0x00 },
-	{ STB0899_I2CCFG		, 0x88 },
-	{ STB0899_I2CRPT		, 0x58 }, /* Repeater=8, Stop=disabled */
-	{ STB0899_IOPVALUE5		, 0x00 },
-	{ STB0899_IOPVALUE4		, 0x20 },
-	{ STB0899_IOPVALUE3		, 0xc9 },
-	{ STB0899_IOPVALUE2		, 0x90 },
-	{ STB0899_IOPVALUE1		, 0x40 },
-	{ STB0899_IOPVALUE0		, 0x00 },
-	{ STB0899_GPIO00CFG		, 0x82 },
-	{ STB0899_GPIO01CFG		, 0x82 },
-	{ STB0899_GPIO02CFG		, 0x82 },
-	{ STB0899_GPIO03CFG		, 0x82 },
-	{ STB0899_GPIO04CFG		, 0x82 },
-	{ STB0899_GPIO05CFG		, 0x82 },
-	{ STB0899_GPIO06CFG		, 0x82 },
-	{ STB0899_GPIO07CFG		, 0x82 },
-	{ STB0899_GPIO08CFG		, 0x82 },
-	{ STB0899_GPIO09CFG		, 0x82 },
-	{ STB0899_GPIO10CFG		, 0x82 },
-	{ STB0899_GPIO11CFG		, 0x82 },
-	{ STB0899_GPIO12CFG		, 0x82 },
-	{ STB0899_GPIO13CFG		, 0x82 },
-	{ STB0899_GPIO14CFG		, 0x82 },
-	{ STB0899_GPIO15CFG		, 0x82 },
-	{ STB0899_GPIO16CFG		, 0x82 },
-	{ STB0899_GPIO17CFG		, 0x82 },
-	{ STB0899_GPIO18CFG		, 0x82 },
-	{ STB0899_GPIO19CFG		, 0x82 },
-	{ STB0899_GPIO20CFG		, 0x82 },
-	{ STB0899_SDATCFG		, 0xb8 },
-	{ STB0899_SCLTCFG		, 0xba },
-	{ STB0899_AGCRFCFG		, 0x08 }, /* 0x1c */
-	{ STB0899_GPIO22		, 0x82 }, /* AGCBB2CFG */
-	{ STB0899_GPIO21		, 0x91 }, /* AGCBB1CFG */
-	{ STB0899_DIRCLKCFG		, 0x82 },
-	{ STB0899_CLKOUT27CFG		, 0x7e },
-	{ STB0899_STDBYCFG		, 0x82 },
-	{ STB0899_CS0CFG		, 0x82 },
-	{ STB0899_CS1CFG		, 0x82 },
-	{ STB0899_DISEQCOCFG		, 0x20 },
-	{ STB0899_GPIO32CFG		, 0x82 },
-	{ STB0899_GPIO33CFG		, 0x82 },
-	{ STB0899_GPIO34CFG		, 0x82 },
-	{ STB0899_GPIO35CFG		, 0x82 },
-	{ STB0899_GPIO36CFG		, 0x82 },
-	{ STB0899_GPIO37CFG		, 0x82 },
-	{ STB0899_GPIO38CFG		, 0x82 },
-	{ STB0899_GPIO39CFG		, 0x82 },
-	{ STB0899_NCOARSE		, 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */
-	{ STB0899_SYNTCTRL		, 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */
-	{ STB0899_FILTCTRL		, 0x00 },
-	{ STB0899_SYSCTRL		, 0x00 },
-	{ STB0899_STOPCLK1		, 0x20 },
-	{ STB0899_STOPCLK2		, 0x00 },
-	{ STB0899_INTBUFSTATUS		, 0x00 },
-	{ STB0899_INTBUFCTRL		, 0x0a },
-	{ 0xffff			, 0xff },
-};
-
-static const struct stb0899_s1_reg knc1_stb0899_s1_init_3[] = {
-	{ STB0899_DEMOD			, 0x00 },
-	{ STB0899_RCOMPC		, 0xc9 },
-	{ STB0899_AGC1CN		, 0x41 },
-	{ STB0899_AGC1REF		, 0x08 },
-	{ STB0899_RTC			, 0x7a },
-	{ STB0899_TMGCFG		, 0x4e },
-	{ STB0899_AGC2REF		, 0x33 },
-	{ STB0899_TLSR			, 0x84 },
-	{ STB0899_CFD			, 0xee },
-	{ STB0899_ACLC			, 0x87 },
-	{ STB0899_BCLC			, 0x94 },
-	{ STB0899_EQON			, 0x41 },
-	{ STB0899_LDT			, 0xdd },
-	{ STB0899_LDT2			, 0xc9 },
-	{ STB0899_EQUALREF		, 0xb4 },
-	{ STB0899_TMGRAMP		, 0x10 },
-	{ STB0899_TMGTHD		, 0x30 },
-	{ STB0899_IDCCOMP		, 0xfb },
-	{ STB0899_QDCCOMP		, 0x03 },
-	{ STB0899_POWERI		, 0x3b },
-	{ STB0899_POWERQ		, 0x3d },
-	{ STB0899_RCOMP			, 0x81 },
-	{ STB0899_AGCIQIN		, 0x80 },
-	{ STB0899_AGC2I1		, 0x04 },
-	{ STB0899_AGC2I2		, 0xf5 },
-	{ STB0899_TLIR			, 0x25 },
-	{ STB0899_RTF			, 0x80 },
-	{ STB0899_DSTATUS		, 0x00 },
-	{ STB0899_LDI			, 0xca },
-	{ STB0899_CFRM			, 0xf1 },
-	{ STB0899_CFRL			, 0xf3 },
-	{ STB0899_NIRM			, 0x2a },
-	{ STB0899_NIRL			, 0x05 },
-	{ STB0899_ISYMB			, 0x17 },
-	{ STB0899_QSYMB			, 0xfa },
-	{ STB0899_SFRH			, 0x2f },
-	{ STB0899_SFRM			, 0x68 },
-	{ STB0899_SFRL			, 0x40 },
-	{ STB0899_SFRUPH		, 0x2f },
-	{ STB0899_SFRUPM		, 0x68 },
-	{ STB0899_SFRUPL		, 0x40 },
-	{ STB0899_EQUAI1		, 0xfd },
-	{ STB0899_EQUAQ1		, 0x04 },
-	{ STB0899_EQUAI2		, 0x0f },
-	{ STB0899_EQUAQ2		, 0xff },
-	{ STB0899_EQUAI3		, 0xdf },
-	{ STB0899_EQUAQ3		, 0xfa },
-	{ STB0899_EQUAI4		, 0x37 },
-	{ STB0899_EQUAQ4		, 0x0d },
-	{ STB0899_EQUAI5		, 0xbd },
-	{ STB0899_EQUAQ5		, 0xf7 },
-	{ STB0899_DSTATUS2		, 0x00 },
-	{ STB0899_VSTATUS		, 0x00 },
-	{ STB0899_VERROR		, 0xff },
-	{ STB0899_IQSWAP		, 0x2a },
-	{ STB0899_ECNT1M		, 0x00 },
-	{ STB0899_ECNT1L		, 0x00 },
-	{ STB0899_ECNT2M		, 0x00 },
-	{ STB0899_ECNT2L		, 0x00 },
-	{ STB0899_ECNT3M		, 0x00 },
-	{ STB0899_ECNT3L		, 0x00 },
-	{ STB0899_FECAUTO1		, 0x06 },
-	{ STB0899_FECM			, 0x01 },
-	{ STB0899_VTH12			, 0xf0 },
-	{ STB0899_VTH23			, 0xa0 },
-	{ STB0899_VTH34			, 0x78 },
-	{ STB0899_VTH56			, 0x4e },
-	{ STB0899_VTH67			, 0x48 },
-	{ STB0899_VTH78			, 0x38 },
-	{ STB0899_PRVIT			, 0xff },
-	{ STB0899_VITSYNC		, 0x19 },
-	{ STB0899_RSULC			, 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
-	{ STB0899_TSULC			, 0x42 },
-	{ STB0899_RSLLC			, 0x40 },
-	{ STB0899_TSLPL			, 0x12 },
-	{ STB0899_TSCFGH		, 0x0c },
-	{ STB0899_TSCFGM		, 0x00 },
-	{ STB0899_TSCFGL		, 0x0c },
-	{ STB0899_TSOUT			, 0x4d }, /* 0x0d for CAM */
-	{ STB0899_RSSYNCDEL		, 0x00 },
-	{ STB0899_TSINHDELH		, 0x02 },
-	{ STB0899_TSINHDELM		, 0x00 },
-	{ STB0899_TSINHDELL		, 0x00 },
-	{ STB0899_TSLLSTKM		, 0x00 },
-	{ STB0899_TSLLSTKL		, 0x00 },
-	{ STB0899_TSULSTKM		, 0x00 },
-	{ STB0899_TSULSTKL		, 0xab },
-	{ STB0899_PCKLENUL		, 0x00 },
-	{ STB0899_PCKLENLL		, 0xcc },
-	{ STB0899_RSPCKLEN		, 0xcc },
-	{ STB0899_TSSTATUS		, 0x80 },
-	{ STB0899_ERRCTRL1		, 0xb6 },
-	{ STB0899_ERRCTRL2		, 0x96 },
-	{ STB0899_ERRCTRL3		, 0x89 },
-	{ STB0899_DMONMSK1		, 0x27 },
-	{ STB0899_DMONMSK0		, 0x03 },
-	{ STB0899_DEMAPVIT		, 0x5c },
-	{ STB0899_PLPARM		, 0x1f },
-	{ STB0899_PDELCTRL		, 0x48 },
-	{ STB0899_PDELCTRL2		, 0x00 },
-	{ STB0899_BBHCTRL1		, 0x00 },
-	{ STB0899_BBHCTRL2		, 0x00 },
-	{ STB0899_HYSTTHRESH		, 0x77 },
-	{ STB0899_MATCSTM		, 0x00 },
-	{ STB0899_MATCSTL		, 0x00 },
-	{ STB0899_UPLCSTM		, 0x00 },
-	{ STB0899_UPLCSTL		, 0x00 },
-	{ STB0899_DFLCSTM		, 0x00 },
-	{ STB0899_DFLCSTL		, 0x00 },
-	{ STB0899_SYNCCST		, 0x00 },
-	{ STB0899_SYNCDCSTM		, 0x00 },
-	{ STB0899_SYNCDCSTL		, 0x00 },
-	{ STB0899_ISI_ENTRY		, 0x00 },
-	{ STB0899_ISI_BIT_EN		, 0x00 },
-	{ STB0899_MATSTRM		, 0x00 },
-	{ STB0899_MATSTRL		, 0x00 },
-	{ STB0899_UPLSTRM		, 0x00 },
-	{ STB0899_UPLSTRL		, 0x00 },
-	{ STB0899_DFLSTRM		, 0x00 },
-	{ STB0899_DFLSTRL		, 0x00 },
-	{ STB0899_SYNCSTR		, 0x00 },
-	{ STB0899_SYNCDSTRM		, 0x00 },
-	{ STB0899_SYNCDSTRL		, 0x00 },
-	{ STB0899_CFGPDELSTATUS1	, 0x10 },
-	{ STB0899_CFGPDELSTATUS2	, 0x00 },
-	{ STB0899_BBFERRORM		, 0x00 },
-	{ STB0899_BBFERRORL		, 0x00 },
-	{ STB0899_UPKTERRORM		, 0x00 },
-	{ STB0899_UPKTERRORL		, 0x00 },
-	{ 0xffff			, 0xff },
-};
-
-/* STB0899 demodulator config for the KNC1 and clones */
-static struct stb0899_config knc1_dvbs2_config = {
-	.init_dev		= knc1_stb0899_s1_init_1,
-	.init_s2_demod		= stb0899_s2_init_2,
-	.init_s1_demod		= knc1_stb0899_s1_init_3,
-	.init_s2_fec		= stb0899_s2_init_4,
-	.init_tst		= stb0899_s1_init_5,
-
-	.postproc		= NULL,
-
-	.demod_address		= 0x68,
-//	.ts_output_mode		= STB0899_OUT_PARALLEL,	/* types = SERIAL/PARALLEL	*/
-	.block_sync_mode	= STB0899_SYNC_FORCED,	/* DSS, SYNC_FORCED/UNSYNCED	*/
-//	.ts_pfbit_toggle	= STB0899_MPEG_NORMAL,	/* DirecTV, MPEG toggling seq	*/
-
-	.xtal_freq		= 27000000,
-	.inversion		= IQ_SWAP_OFF, /* 1 */
-
-	.lo_clk			= 76500000,
-	.hi_clk			= 90000000,
-
-	.esno_ave		= STB0899_DVBS2_ESNO_AVE,
-	.esno_quant		= STB0899_DVBS2_ESNO_QUANT,
-	.avframes_coarse	= STB0899_DVBS2_AVFRAMES_COARSE,
-	.avframes_fine		= STB0899_DVBS2_AVFRAMES_FINE,
-	.miss_threshold		= STB0899_DVBS2_MISS_THRESHOLD,
-	.uwp_threshold_acq	= STB0899_DVBS2_UWP_THRESHOLD_ACQ,
-	.uwp_threshold_track	= STB0899_DVBS2_UWP_THRESHOLD_TRACK,
-	.uwp_threshold_sof	= STB0899_DVBS2_UWP_THRESHOLD_SOF,
-	.sof_search_timeout	= STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
-
-	.btr_nco_bits		= STB0899_DVBS2_BTR_NCO_BITS,
-	.btr_gain_shift_offset	= STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
-	.crl_nco_bits		= STB0899_DVBS2_CRL_NCO_BITS,
-	.ldpc_max_iter		= STB0899_DVBS2_LDPC_MAX_ITER,
-
-	.tuner_get_frequency	= tda8261_get_frequency,
-	.tuner_set_frequency	= tda8261_set_frequency,
-	.tuner_set_bandwidth	= NULL,
-	.tuner_get_bandwidth	= tda8261_get_bandwidth,
-	.tuner_set_rfsiggain	= NULL
-};
-
-/*
- * SD1878/SHA tuner config
- * 1F, Single I/P, Horizontal mount, High Sensitivity
- */
-static const struct tda8261_config sd1878c_config = {
-//	.name		= "SD1878/SHA",
-	.addr		= 0x60,
-	.step_size	= TDA8261_STEP_1000 /* kHz */
-};
-
-static u8 read_pwm(struct budget_av *budget_av)
-{
-	u8 b = 0xff;
-	u8 pwm;
-	struct i2c_msg msg[] = { {.addr = 0x50,.flags = 0,.buf = &b,.len = 1},
-	{.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1}
-	};
-
-	if ((i2c_transfer(&budget_av->budget.i2c_adap, msg, 2) != 2)
-	    || (pwm == 0xff))
-		pwm = 0x48;
-
-	return pwm;
-}
-
-#define SUBID_DVBS_KNC1			0x0010
-#define SUBID_DVBS_KNC1_PLUS		0x0011
-#define SUBID_DVBS_TYPHOON		0x4f56
-#define SUBID_DVBS_CINERGY1200		0x1154
-#define SUBID_DVBS_CYNERGY1200N 	0x1155
-#define SUBID_DVBS_TV_STAR		0x0014
-#define SUBID_DVBS_TV_STAR_PLUS_X4	0x0015
-#define SUBID_DVBS_TV_STAR_CI		0x0016
-#define SUBID_DVBS2_KNC1		0x0018
-#define SUBID_DVBS2_KNC1_OEM		0x0019
-#define SUBID_DVBS_EASYWATCH_1  	0x001a
-#define SUBID_DVBS_EASYWATCH_2  	0x001b
-#define SUBID_DVBS2_EASYWATCH		0x001d
-#define SUBID_DVBS_EASYWATCH		0x001e
-
-#define SUBID_DVBC_EASYWATCH		0x002a
-#define SUBID_DVBC_EASYWATCH_MK3	0x002c
-#define SUBID_DVBC_KNC1			0x0020
-#define SUBID_DVBC_KNC1_PLUS		0x0021
-#define SUBID_DVBC_KNC1_MK3		0x0022
-#define SUBID_DVBC_KNC1_TDA10024	0x0028
-#define SUBID_DVBC_KNC1_PLUS_MK3	0x0023
-#define SUBID_DVBC_CINERGY1200		0x1156
-#define SUBID_DVBC_CINERGY1200_MK3	0x1176
-
-#define SUBID_DVBT_EASYWATCH		0x003a
-#define SUBID_DVBT_KNC1_PLUS		0x0031
-#define SUBID_DVBT_KNC1			0x0030
-#define SUBID_DVBT_CINERGY1200		0x1157
-
-static void frontend_init(struct budget_av *budget_av)
-{
-	struct saa7146_dev * saa = budget_av->budget.dev;
-	struct dvb_frontend * fe = NULL;
-
-	/* Enable / PowerON Frontend */
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
-
-	/* Wait for PowerON */
-	msleep(100);
-
-	/* additional setup necessary for the PLUS cards */
-	switch (saa->pci->subsystem_device) {
-		case SUBID_DVBS_KNC1_PLUS:
-		case SUBID_DVBC_KNC1_PLUS:
-		case SUBID_DVBT_KNC1_PLUS:
-		case SUBID_DVBC_EASYWATCH:
-		case SUBID_DVBC_KNC1_PLUS_MK3:
-		case SUBID_DVBS2_KNC1:
-		case SUBID_DVBS2_KNC1_OEM:
-		case SUBID_DVBS2_EASYWATCH:
-			saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
-			break;
-	}
-
-	switch (saa->pci->subsystem_device) {
-
-	case SUBID_DVBS_KNC1:
-		/*
-		 * maybe that setting is needed for other dvb-s cards as well,
-		 * but so far it has been only confirmed for this type
-		 */
-		budget_av->reinitialise_demod = 1;
-		/* fall through */
-	case SUBID_DVBS_KNC1_PLUS:
-	case SUBID_DVBS_EASYWATCH_1:
-		if (saa->pci->subsystem_vendor == 0x1894) {
-			fe = dvb_attach(stv0299_attach, &cinergy_1200s_1894_0010_config,
-					     &budget_av->budget.i2c_adap);
-			if (fe) {
-				dvb_attach(tua6100_attach, fe, 0x60, &budget_av->budget.i2c_adap);
-			}
-		} else {
-			fe = dvb_attach(stv0299_attach, &typhoon_config,
-					     &budget_av->budget.i2c_adap);
-			if (fe) {
-				fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
-			}
-		}
-		break;
-
-	case SUBID_DVBS_TV_STAR:
-	case SUBID_DVBS_TV_STAR_PLUS_X4:
-	case SUBID_DVBS_TV_STAR_CI:
-	case SUBID_DVBS_CYNERGY1200N:
-	case SUBID_DVBS_EASYWATCH:
-	case SUBID_DVBS_EASYWATCH_2:
-		fe = dvb_attach(stv0299_attach, &philips_sd1878_config,
-				&budget_av->budget.i2c_adap);
-		if (fe) {
-			dvb_attach(dvb_pll_attach, fe, 0x60,
-				   &budget_av->budget.i2c_adap,
-				   DVB_PLL_PHILIPS_SD1878_TDA8261);
-		}
-		break;
-
-	case SUBID_DVBS_TYPHOON:
-		fe = dvb_attach(stv0299_attach, &typhoon_config,
-				    &budget_av->budget.i2c_adap);
-		if (fe) {
-			fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
-		}
-		break;
-	case SUBID_DVBS2_KNC1:
-	case SUBID_DVBS2_KNC1_OEM:
-	case SUBID_DVBS2_EASYWATCH:
-		budget_av->reinitialise_demod = 1;
-		if ((fe = dvb_attach(stb0899_attach, &knc1_dvbs2_config, &budget_av->budget.i2c_adap)))
-			dvb_attach(tda8261_attach, fe, &sd1878c_config, &budget_av->budget.i2c_adap);
-
-		break;
-	case SUBID_DVBS_CINERGY1200:
-		fe = dvb_attach(stv0299_attach, &cinergy_1200s_config,
-				    &budget_av->budget.i2c_adap);
-		if (fe) {
-			fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
-		}
-		break;
-
-	case SUBID_DVBC_KNC1:
-	case SUBID_DVBC_KNC1_PLUS:
-	case SUBID_DVBC_CINERGY1200:
-	case SUBID_DVBC_EASYWATCH:
-		budget_av->reinitialise_demod = 1;
-		budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
-		fe = dvb_attach(tda10021_attach, &philips_cu1216_config,
-				     &budget_av->budget.i2c_adap,
-				     read_pwm(budget_av));
-		if (fe == NULL)
-			fe = dvb_attach(tda10021_attach, &philips_cu1216_config_altaddress,
-					     &budget_av->budget.i2c_adap,
-					     read_pwm(budget_av));
-		if (fe) {
-			fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
-		}
-		break;
-
-	case SUBID_DVBC_EASYWATCH_MK3:
-	case SUBID_DVBC_CINERGY1200_MK3:
-	case SUBID_DVBC_KNC1_MK3:
-	case SUBID_DVBC_KNC1_TDA10024:
-	case SUBID_DVBC_KNC1_PLUS_MK3:
-		budget_av->reinitialise_demod = 1;
-		budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
-		fe = dvb_attach(tda10023_attach,
-			&philips_cu1216_tda10023_config,
-			&budget_av->budget.i2c_adap,
-			read_pwm(budget_av));
-		if (fe) {
-			fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
-		}
-		break;
-
-	case SUBID_DVBT_EASYWATCH:
-	case SUBID_DVBT_KNC1:
-	case SUBID_DVBT_KNC1_PLUS:
-	case SUBID_DVBT_CINERGY1200:
-		budget_av->reinitialise_demod = 1;
-		fe = dvb_attach(tda10046_attach, &philips_tu1216_config,
-				     &budget_av->budget.i2c_adap);
-		if (fe) {
-			fe->ops.tuner_ops.init = philips_tu1216_tuner_init;
-			fe->ops.tuner_ops.set_params = philips_tu1216_tuner_set_params;
-		}
-		break;
-	}
-
-	if (fe == NULL) {
-		pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
-		       saa->pci->vendor,
-		       saa->pci->device,
-		       saa->pci->subsystem_vendor,
-		       saa->pci->subsystem_device);
-		return;
-	}
-
-	budget_av->budget.dvb_frontend = fe;
-
-	if (dvb_register_frontend(&budget_av->budget.dvb_adapter,
-				  budget_av->budget.dvb_frontend)) {
-		pr_err("Frontend registration failed!\n");
-		dvb_frontend_detach(budget_av->budget.dvb_frontend);
-		budget_av->budget.dvb_frontend = NULL;
-	}
-}
-
-
-static void budget_av_irq(struct saa7146_dev *dev, u32 * isr)
-{
-	struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
-
-	dprintk(8, "dev: %p, budget_av: %p\n", dev, budget_av);
-
-	if (*isr & MASK_10)
-		ttpci_budget_irq10_handler(dev, isr);
-}
-
-static int budget_av_detach(struct saa7146_dev *dev)
-{
-	struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
-	int err;
-
-	dprintk(2, "dev: %p\n", dev);
-
-	if (1 == budget_av->has_saa7113) {
-		saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
-
-		msleep(200);
-
-		saa7146_unregister_device(&budget_av->vd, dev);
-
-		saa7146_vv_release(dev);
-	}
-
-	if (budget_av->budget.ci_present)
-		ciintf_deinit(budget_av);
-
-	if (budget_av->budget.dvb_frontend != NULL) {
-		dvb_unregister_frontend(budget_av->budget.dvb_frontend);
-		dvb_frontend_detach(budget_av->budget.dvb_frontend);
-	}
-	err = ttpci_budget_deinit(&budget_av->budget);
-
-	kfree(budget_av);
-
-	return err;
-}
-
-#define KNC1_INPUTS 2
-static struct v4l2_input knc1_inputs[KNC1_INPUTS] = {
-	{ 0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0,
-		V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
-	{ 1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0,
-		V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
-};
-
-static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
-{
-	dprintk(1, "VIDIOC_ENUMINPUT %d\n", i->index);
-	if (i->index >= KNC1_INPUTS)
-		return -EINVAL;
-	memcpy(i, &knc1_inputs[i->index], sizeof(struct v4l2_input));
-	return 0;
-}
-
-static int vidioc_g_input(struct file *file, void *fh, unsigned int *i)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct budget_av *budget_av = (struct budget_av *)dev->ext_priv;
-
-	*i = budget_av->cur_input;
-
-	dprintk(1, "VIDIOC_G_INPUT %d\n", *i);
-	return 0;
-}
-
-static int vidioc_s_input(struct file *file, void *fh, unsigned int input)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct budget_av *budget_av = (struct budget_av *)dev->ext_priv;
-
-	dprintk(1, "VIDIOC_S_INPUT %d\n", input);
-	return saa7113_setinput(budget_av, input);
-}
-
-static struct saa7146_ext_vv vv_data;
-
-static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
-{
-	struct budget_av *budget_av;
-	u8 *mac;
-	int err;
-
-	dprintk(2, "dev: %p\n", dev);
-
-	if (!(budget_av = kzalloc(sizeof(struct budget_av), GFP_KERNEL)))
-		return -ENOMEM;
-
-	budget_av->has_saa7113 = 0;
-	budget_av->budget.ci_present = 0;
-
-	dev->ext_priv = budget_av;
-
-	err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE,
-				adapter_nr);
-	if (err) {
-		kfree(budget_av);
-		return err;
-	}
-
-	/* knc1 initialization */
-	saa7146_write(dev, DD1_STREAM_B, 0x04000000);
-	saa7146_write(dev, DD1_INIT, 0x07000600);
-	saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26);
-
-	if (saa7113_init(budget_av) == 0) {
-		budget_av->has_saa7113 = 1;
-
-		if (0 != saa7146_vv_init(dev, &vv_data)) {
-			/* fixme: proper cleanup here */
-			ERR("cannot init vv subsystem\n");
-			return err;
-		}
-		vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
-		vv_data.vid_ops.vidioc_g_input = vidioc_g_input;
-		vv_data.vid_ops.vidioc_s_input = vidioc_s_input;
-
-		if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_GRABBER))) {
-			/* fixme: proper cleanup here */
-			ERR("cannot register capture v4l2 device\n");
-			saa7146_vv_release(dev);
-			return err;
-		}
-
-		/* beware: this modifies dev->vv ... */
-		saa7146_set_hps_source_and_sync(dev, SAA7146_HPS_SOURCE_PORT_A,
-						SAA7146_HPS_SYNC_PORT_A);
-
-		saa7113_setinput(budget_av, 0);
-	}
-
-	/* fixme: find some sane values here... */
-	saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
-
-	mac = budget_av->budget.dvb_adapter.proposed_mac;
-	if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) {
-		pr_err("KNC1-%d: Could not read MAC from KNC1 card\n",
-		       budget_av->budget.dvb_adapter.num);
-		memset(mac, 0, 6);
-	} else {
-		pr_info("KNC1-%d: MAC addr = %pM\n",
-			budget_av->budget.dvb_adapter.num, mac);
-	}
-
-	budget_av->budget.dvb_adapter.priv = budget_av;
-	frontend_init(budget_av);
-	ciintf_init(budget_av);
-
-	ttpci_budget_init_hooks(&budget_av->budget);
-
-	return 0;
-}
-
-static struct saa7146_standard standard[] = {
-	{.name = "PAL",.id = V4L2_STD_PAL,
-	 .v_offset = 0x17,.v_field = 288,
-	 .h_offset = 0x14,.h_pixels = 680,
-	 .v_max_out = 576,.h_max_out = 768 },
-
-	{.name = "NTSC",.id = V4L2_STD_NTSC,
-	 .v_offset = 0x16,.v_field = 240,
-	 .h_offset = 0x06,.h_pixels = 708,
-	 .v_max_out = 480,.h_max_out = 640, },
-};
-
-static struct saa7146_ext_vv vv_data = {
-	.inputs = 2,
-	.capabilities = 0,	// perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113
-	.flags = 0,
-	.stds = &standard[0],
-	.num_stds = ARRAY_SIZE(standard),
-};
-
-static struct saa7146_extension budget_extension;
-
-MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S);
-MAKE_BUDGET_INFO(knc1s2,"KNC1 DVB-S2", BUDGET_KNC1S2);
-MAKE_BUDGET_INFO(sates2,"Satelco EasyWatch DVB-S2", BUDGET_KNC1S2);
-MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C);
-MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T);
-MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR);
-MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR);
-MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light", BUDGET_KNC1S);
-MAKE_BUDGET_INFO(satewps, "Satelco EasyWatch DVB-S", BUDGET_KNC1S);
-MAKE_BUDGET_INFO(satewplc, "Satelco EasyWatch DVB-C", BUDGET_KNC1CP);
-MAKE_BUDGET_INFO(satewcmk3, "Satelco EasyWatch DVB-C MK3", BUDGET_KNC1C_MK3);
-MAKE_BUDGET_INFO(satewt, "Satelco EasyWatch DVB-T", BUDGET_KNC1T);
-MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
-MAKE_BUDGET_INFO(knc1spx4, "KNC1 DVB-S Plus X4", BUDGET_KNC1SP);
-MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
-MAKE_BUDGET_INFO(knc1cmk3, "KNC1 DVB-C MK3", BUDGET_KNC1C_MK3);
-MAKE_BUDGET_INFO(knc1ctda10024, "KNC1 DVB-C TDA10024", BUDGET_KNC1C_TDA10024);
-MAKE_BUDGET_INFO(knc1cpmk3, "KNC1 DVB-C Plus MK3", BUDGET_KNC1CP_MK3);
-MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
-MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
-MAKE_BUDGET_INFO(cin1200sn, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
-MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C);
-MAKE_BUDGET_INFO(cin1200cmk3, "Terratec Cinergy 1200 DVB-C MK3", BUDGET_CIN1200C_MK3);
-MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T);
-
-static struct pci_device_id pci_tbl[] = {
-	MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56),
-	MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010),
-	MAKE_EXTENSION_PCI(knc1s, 0x1894, 0x0010),
-	MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011),
-	MAKE_EXTENSION_PCI(knc1sp, 0x1894, 0x0011),
-	MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014),
-	MAKE_EXTENSION_PCI(knc1spx4, 0x1894, 0x0015),
-	MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016),
-	MAKE_EXTENSION_PCI(knc1s2, 0x1894, 0x0018),
-	MAKE_EXTENSION_PCI(knc1s2, 0x1894, 0x0019),
-	MAKE_EXTENSION_PCI(sates2, 0x1894, 0x001d),
-	MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e),
-	MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a),
-	MAKE_EXTENSION_PCI(satewps, 0x1894, 0x001b),
-	MAKE_EXTENSION_PCI(satewplc, 0x1894, 0x002a),
-	MAKE_EXTENSION_PCI(satewcmk3, 0x1894, 0x002c),
-	MAKE_EXTENSION_PCI(satewt, 0x1894, 0x003a),
-	MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
-	MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
-	MAKE_EXTENSION_PCI(knc1cmk3, 0x1894, 0x0022),
-	MAKE_EXTENSION_PCI(knc1ctda10024, 0x1894, 0x0028),
-	MAKE_EXTENSION_PCI(knc1cpmk3, 0x1894, 0x0023),
-	MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
-	MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031),
-	MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154),
-	MAKE_EXTENSION_PCI(cin1200sn, 0x153b, 0x1155),
-	MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156),
-	MAKE_EXTENSION_PCI(cin1200cmk3, 0x153b, 0x1176),
-	MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157),
-	{
-	 .vendor = 0,
-	}
-};
-
-MODULE_DEVICE_TABLE(pci, pci_tbl);
-
-static struct saa7146_extension budget_extension = {
-	.name = "budget_av",
-	.flags = SAA7146_USE_I2C_IRQ,
-
-	.pci_tbl = pci_tbl,
-
-	.module = THIS_MODULE,
-	.attach = budget_av_attach,
-	.detach = budget_av_detach,
-
-	.irq_mask = MASK_10,
-	.irq_func = budget_av_irq,
-};
-
-static int __init budget_av_init(void)
-{
-	return saa7146_register_extension(&budget_extension);
-}
-
-static void __exit budget_av_exit(void)
-{
-	saa7146_unregister_extension(&budget_extension);
-}
-
-module_init(budget_av_init);
-module_exit(budget_av_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
-MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
-		   "budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)");
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
deleted file mode 100644
index 98e5241..0000000
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ /dev/null
@@ -1,1591 +0,0 @@
-/*
- * budget-ci.c: driver for the SAA7146 based Budget DVB cards
- *
- * Compiled from various sources by Michael Hunold <michael@mihu.de>
- *
- *     msp430 IR support contributed by Jack Thomasson <jkt@Helius.COM>
- *     partially based on the Siemens DVB driver by Ralph+Marcus Metzler
- *
- * CI interface support (c) 2004 Andrew de Quincey <adq_dvb@lidskialf.net>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org/
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <media/rc-core.h>
-
-#include "budget.h"
-
-#include "dvb_ca_en50221.h"
-#include "stv0299.h"
-#include "stv0297.h"
-#include "tda1004x.h"
-#include "stb0899_drv.h"
-#include "stb0899_reg.h"
-#include "stb0899_cfg.h"
-#include "stb6100.h"
-#include "stb6100_cfg.h"
-#include "lnbp21.h"
-#include "bsbe1.h"
-#include "bsru6.h"
-#include "tda1002x.h"
-#include "tda827x.h"
-#include "bsbe1-d01a.h"
-
-#define MODULE_NAME "budget_ci"
-
-/*
- * Regarding DEBIADDR_IR:
- * Some CI modules hang if random addresses are read.
- * Using address 0x4000 for the IR read means that we
- * use the same address as for CI version, which should
- * be a safe default.
- */
-#define DEBIADDR_IR		0x4000
-#define DEBIADDR_CICONTROL	0x0000
-#define DEBIADDR_CIVERSION	0x4000
-#define DEBIADDR_IO		0x1000
-#define DEBIADDR_ATTR		0x3000
-
-#define CICONTROL_RESET		0x01
-#define CICONTROL_ENABLETS	0x02
-#define CICONTROL_CAMDETECT	0x08
-
-#define DEBICICTL		0x00420000
-#define DEBICICAM		0x02420000
-
-#define SLOTSTATUS_NONE		1
-#define SLOTSTATUS_PRESENT	2
-#define SLOTSTATUS_RESET	4
-#define SLOTSTATUS_READY	8
-#define SLOTSTATUS_OCCUPIED	(SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY)
-
-/* RC5 device wildcard */
-#define IR_DEVICE_ANY		255
-
-static int rc5_device = -1;
-module_param(rc5_device, int, 0644);
-MODULE_PARM_DESC(rc5_device, "only IR commands to given RC5 device (device = 0 - 31, any device = 255, default: autodetect)");
-
-static int ir_debug;
-module_param(ir_debug, int, 0644);
-MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding");
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-struct budget_ci_ir {
-	struct rc_dev *dev;
-	struct tasklet_struct msp430_irq_tasklet;
-	char name[72]; /* 40 + 32 for (struct saa7146_dev).name */
-	char phys[32];
-	int rc5_device;
-	u32 ir_key;
-	bool have_command;
-	bool full_rc5;		/* Outputs a full RC5 code */
-};
-
-struct budget_ci {
-	struct budget budget;
-	struct tasklet_struct ciintf_irq_tasklet;
-	int slot_status;
-	int ci_irq;
-	struct dvb_ca_en50221 ca;
-	struct budget_ci_ir ir;
-	u8 tuner_pll_address; /* used for philips_tdm1316l configs */
-};
-
-static void msp430_ir_interrupt(unsigned long data)
-{
-	struct budget_ci *budget_ci = (struct budget_ci *) data;
-	struct rc_dev *dev = budget_ci->ir.dev;
-	u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8;
-
-	/*
-	 * The msp430 chip can generate two different bytes, command and device
-	 *
-	 * type1: X1CCCCCC, C = command bits (0 - 63)
-	 * type2: X0TDDDDD, D = device bits (0 - 31), T = RC5 toggle bit
-	 *
-	 * Each signal from the remote control can generate one or more command
-	 * bytes and one or more device bytes. For the repeated bytes, the
-	 * highest bit (X) is set. The first command byte is always generated
-	 * before the first device byte. Other than that, no specific order
-	 * seems to apply. To make life interesting, bytes can also be lost.
-	 *
-	 * Only when we have a command and device byte, a keypress is
-	 * generated.
-	 */
-
-	if (ir_debug)
-		printk("budget_ci: received byte 0x%02x\n", command);
-
-	/* Remove repeat bit, we use every command */
-	command = command & 0x7f;
-
-	/* Is this a RC5 command byte? */
-	if (command & 0x40) {
-		budget_ci->ir.have_command = true;
-		budget_ci->ir.ir_key = command & 0x3f;
-		return;
-	}
-
-	/* It's a RC5 device byte */
-	if (!budget_ci->ir.have_command)
-		return;
-	budget_ci->ir.have_command = false;
-
-	if (budget_ci->ir.rc5_device != IR_DEVICE_ANY &&
-	    budget_ci->ir.rc5_device != (command & 0x1f))
-		return;
-
-	if (budget_ci->ir.full_rc5) {
-		rc_keydown(dev,
-			   budget_ci->ir.rc5_device <<8 | budget_ci->ir.ir_key,
-			   (command & 0x20) ? 1 : 0);
-		return;
-	}
-
-	/* FIXME: We should generate complete scancodes for all devices */
-	rc_keydown(dev, budget_ci->ir.ir_key, (command & 0x20) ? 1 : 0);
-}
-
-static int msp430_ir_init(struct budget_ci *budget_ci)
-{
-	struct saa7146_dev *saa = budget_ci->budget.dev;
-	struct rc_dev *dev;
-	int error;
-
-	dev = rc_allocate_device();
-	if (!dev) {
-		printk(KERN_ERR "budget_ci: IR interface initialisation failed\n");
-		return -ENOMEM;
-	}
-
-	snprintf(budget_ci->ir.name, sizeof(budget_ci->ir.name),
-		 "Budget-CI dvb ir receiver %s", saa->name);
-	snprintf(budget_ci->ir.phys, sizeof(budget_ci->ir.phys),
-		 "pci-%s/ir0", pci_name(saa->pci));
-
-	dev->driver_name = MODULE_NAME;
-	dev->input_name = budget_ci->ir.name;
-	dev->input_phys = budget_ci->ir.phys;
-	dev->input_id.bustype = BUS_PCI;
-	dev->input_id.version = 1;
-	if (saa->pci->subsystem_vendor) {
-		dev->input_id.vendor = saa->pci->subsystem_vendor;
-		dev->input_id.product = saa->pci->subsystem_device;
-	} else {
-		dev->input_id.vendor = saa->pci->vendor;
-		dev->input_id.product = saa->pci->device;
-	}
-	dev->dev.parent = &saa->pci->dev;
-
-	if (rc5_device < 0)
-		budget_ci->ir.rc5_device = IR_DEVICE_ANY;
-	else
-		budget_ci->ir.rc5_device = rc5_device;
-
-	/* Select keymap and address */
-	switch (budget_ci->budget.dev->pci->subsystem_device) {
-	case 0x100c:
-	case 0x100f:
-	case 0x1011:
-	case 0x1012:
-		/* The hauppauge keymap is a superset of these remotes */
-		dev->map_name = RC_MAP_HAUPPAUGE;
-		budget_ci->ir.full_rc5 = true;
-
-		if (rc5_device < 0)
-			budget_ci->ir.rc5_device = 0x1f;
-		break;
-	case 0x1010:
-	case 0x1017:
-	case 0x1019:
-	case 0x101a:
-	case 0x101b:
-		/* for the Technotrend 1500 bundled remote */
-		dev->map_name = RC_MAP_TT_1500;
-		break;
-	default:
-		/* unknown remote */
-		dev->map_name = RC_MAP_BUDGET_CI_OLD;
-		break;
-	}
-	if (!budget_ci->ir.full_rc5)
-		dev->scanmask = 0xff;
-
-	error = rc_register_device(dev);
-	if (error) {
-		printk(KERN_ERR "budget_ci: could not init driver for IR device (code %d)\n", error);
-		rc_free_device(dev);
-		return error;
-	}
-
-	budget_ci->ir.dev = dev;
-
-	tasklet_init(&budget_ci->ir.msp430_irq_tasklet, msp430_ir_interrupt,
-		     (unsigned long) budget_ci);
-
-	SAA7146_IER_ENABLE(saa, MASK_06);
-	saa7146_setgpio(saa, 3, SAA7146_GPIO_IRQHI);
-
-	return 0;
-}
-
-static void msp430_ir_deinit(struct budget_ci *budget_ci)
-{
-	struct saa7146_dev *saa = budget_ci->budget.dev;
-
-	SAA7146_IER_DISABLE(saa, MASK_06);
-	saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
-	tasklet_kill(&budget_ci->ir.msp430_irq_tasklet);
-
-	rc_unregister_device(budget_ci->ir.dev);
-}
-
-static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
-{
-	struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM,
-				     DEBIADDR_ATTR | (address & 0xfff), 1, 1, 0);
-}
-
-static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value)
-{
-	struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM,
-				      DEBIADDR_ATTR | (address & 0xfff), 1, value, 1, 0);
-}
-
-static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address)
-{
-	struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM,
-				     DEBIADDR_IO | (address & 3), 1, 1, 0);
-}
-
-static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value)
-{
-	struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM,
-				      DEBIADDR_IO | (address & 3), 1, value, 1, 0);
-}
-
-static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
-{
-	struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
-	struct saa7146_dev *saa = budget_ci->budget.dev;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	if (budget_ci->ci_irq) {
-		// trigger on RISING edge during reset so we know when READY is re-asserted
-		saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
-	}
-	budget_ci->slot_status = SLOTSTATUS_RESET;
-	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
-	msleep(1);
-	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
-			       CICONTROL_RESET, 1, 0);
-
-	saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI);
-	ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
-	return 0;
-}
-
-static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
-{
-	struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
-	struct saa7146_dev *saa = budget_ci->budget.dev;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI);
-	ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
-	return 0;
-}
-
-static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
-{
-	struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
-	struct saa7146_dev *saa = budget_ci->budget.dev;
-	int tmp;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO);
-
-	tmp = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
-	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
-			       tmp | CICONTROL_ENABLETS, 1, 0);
-
-	ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
-	return 0;
-}
-
-static void ciintf_interrupt(unsigned long data)
-{
-	struct budget_ci *budget_ci = (struct budget_ci *) data;
-	struct saa7146_dev *saa = budget_ci->budget.dev;
-	unsigned int flags;
-
-	// ensure we don't get spurious IRQs during initialisation
-	if (!budget_ci->budget.ci_present)
-		return;
-
-	// read the CAM status
-	flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
-	if (flags & CICONTROL_CAMDETECT) {
-
-		// GPIO should be set to trigger on falling edge if a CAM is present
-		saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
-
-		if (budget_ci->slot_status & SLOTSTATUS_NONE) {
-			// CAM insertion IRQ
-			budget_ci->slot_status = SLOTSTATUS_PRESENT;
-			dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0,
-						     DVB_CA_EN50221_CAMCHANGE_INSERTED);
-
-		} else if (budget_ci->slot_status & SLOTSTATUS_RESET) {
-			// CAM ready (reset completed)
-			budget_ci->slot_status = SLOTSTATUS_READY;
-			dvb_ca_en50221_camready_irq(&budget_ci->ca, 0);
-
-		} else if (budget_ci->slot_status & SLOTSTATUS_READY) {
-			// FR/DA IRQ
-			dvb_ca_en50221_frda_irq(&budget_ci->ca, 0);
-		}
-	} else {
-
-		// trigger on rising edge if a CAM is not present - when a CAM is inserted, we
-		// only want to get the IRQ when it sets READY. If we trigger on the falling edge,
-		// the CAM might not actually be ready yet.
-		saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
-
-		// generate a CAM removal IRQ if we haven't already
-		if (budget_ci->slot_status & SLOTSTATUS_OCCUPIED) {
-			// CAM removal IRQ
-			budget_ci->slot_status = SLOTSTATUS_NONE;
-			dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0,
-						     DVB_CA_EN50221_CAMCHANGE_REMOVED);
-		}
-	}
-}
-
-static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
-{
-	struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
-	unsigned int flags;
-
-	// ensure we don't get spurious IRQs during initialisation
-	if (!budget_ci->budget.ci_present)
-		return -EINVAL;
-
-	// read the CAM status
-	flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
-	if (flags & CICONTROL_CAMDETECT) {
-		// mark it as present if it wasn't before
-		if (budget_ci->slot_status & SLOTSTATUS_NONE) {
-			budget_ci->slot_status = SLOTSTATUS_PRESENT;
-		}
-
-		// during a RESET, we check if we can read from IO memory to see when CAM is ready
-		if (budget_ci->slot_status & SLOTSTATUS_RESET) {
-			if (ciintf_read_attribute_mem(ca, slot, 0) == 0x1d) {
-				budget_ci->slot_status = SLOTSTATUS_READY;
-			}
-		}
-	} else {
-		budget_ci->slot_status = SLOTSTATUS_NONE;
-	}
-
-	if (budget_ci->slot_status != SLOTSTATUS_NONE) {
-		if (budget_ci->slot_status & SLOTSTATUS_READY) {
-			return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
-		}
-		return DVB_CA_EN50221_POLL_CAM_PRESENT;
-	}
-
-	return 0;
-}
-
-static int ciintf_init(struct budget_ci *budget_ci)
-{
-	struct saa7146_dev *saa = budget_ci->budget.dev;
-	int flags;
-	int result;
-	int ci_version;
-	int ca_flags;
-
-	memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221));
-
-	// enable DEBI pins
-	saa7146_write(saa, MC1, MASK_27 | MASK_11);
-
-	// test if it is there
-	ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0);
-	if ((ci_version & 0xa0) != 0xa0) {
-		result = -ENODEV;
-		goto error;
-	}
-
-	// determine whether a CAM is present or not
-	flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
-	budget_ci->slot_status = SLOTSTATUS_NONE;
-	if (flags & CICONTROL_CAMDETECT)
-		budget_ci->slot_status = SLOTSTATUS_PRESENT;
-
-	// version 0xa2 of the CI firmware doesn't generate interrupts
-	if (ci_version == 0xa2) {
-		ca_flags = 0;
-		budget_ci->ci_irq = 0;
-	} else {
-		ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE |
-				DVB_CA_EN50221_FLAG_IRQ_FR |
-				DVB_CA_EN50221_FLAG_IRQ_DA;
-		budget_ci->ci_irq = 1;
-	}
-
-	// register CI interface
-	budget_ci->ca.owner = THIS_MODULE;
-	budget_ci->ca.read_attribute_mem = ciintf_read_attribute_mem;
-	budget_ci->ca.write_attribute_mem = ciintf_write_attribute_mem;
-	budget_ci->ca.read_cam_control = ciintf_read_cam_control;
-	budget_ci->ca.write_cam_control = ciintf_write_cam_control;
-	budget_ci->ca.slot_reset = ciintf_slot_reset;
-	budget_ci->ca.slot_shutdown = ciintf_slot_shutdown;
-	budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable;
-	budget_ci->ca.poll_slot_status = ciintf_poll_slot_status;
-	budget_ci->ca.data = budget_ci;
-	if ((result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter,
-					  &budget_ci->ca,
-					  ca_flags, 1)) != 0) {
-		printk("budget_ci: CI interface detected, but initialisation failed.\n");
-		goto error;
-	}
-
-	// Setup CI slot IRQ
-	if (budget_ci->ci_irq) {
-		tasklet_init(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt, (unsigned long) budget_ci);
-		if (budget_ci->slot_status != SLOTSTATUS_NONE) {
-			saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
-		} else {
-			saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
-		}
-		SAA7146_IER_ENABLE(saa, MASK_03);
-	}
-
-	// enable interface
-	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
-			       CICONTROL_RESET, 1, 0);
-
-	// success!
-	printk("budget_ci: CI interface initialised\n");
-	budget_ci->budget.ci_present = 1;
-
-	// forge a fake CI IRQ so the CAM state is setup correctly
-	if (budget_ci->ci_irq) {
-		flags = DVB_CA_EN50221_CAMCHANGE_REMOVED;
-		if (budget_ci->slot_status != SLOTSTATUS_NONE)
-			flags = DVB_CA_EN50221_CAMCHANGE_INSERTED;
-		dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags);
-	}
-
-	return 0;
-
-error:
-	saa7146_write(saa, MC1, MASK_27);
-	return result;
-}
-
-static void ciintf_deinit(struct budget_ci *budget_ci)
-{
-	struct saa7146_dev *saa = budget_ci->budget.dev;
-
-	// disable CI interrupts
-	if (budget_ci->ci_irq) {
-		SAA7146_IER_DISABLE(saa, MASK_03);
-		saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
-		tasklet_kill(&budget_ci->ciintf_irq_tasklet);
-	}
-
-	// reset interface
-	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
-	msleep(1);
-	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
-			       CICONTROL_RESET, 1, 0);
-
-	// disable TS data stream to CI interface
-	saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT);
-
-	// release the CA device
-	dvb_ca_en50221_release(&budget_ci->ca);
-
-	// disable DEBI pins
-	saa7146_write(saa, MC1, MASK_27);
-}
-
-static void budget_ci_irq(struct saa7146_dev *dev, u32 * isr)
-{
-	struct budget_ci *budget_ci = (struct budget_ci *) dev->ext_priv;
-
-	dprintk(8, "dev: %p, budget_ci: %p\n", dev, budget_ci);
-
-	if (*isr & MASK_06)
-		tasklet_schedule(&budget_ci->ir.msp430_irq_tasklet);
-
-	if (*isr & MASK_10)
-		ttpci_budget_irq10_handler(dev, isr);
-
-	if ((*isr & MASK_03) && (budget_ci->budget.ci_present) && (budget_ci->ci_irq))
-		tasklet_schedule(&budget_ci->ciintf_irq_tasklet);
-}
-
-static u8 philips_su1278_tt_inittab[] = {
-	0x01, 0x0f,
-	0x02, 0x30,
-	0x03, 0x00,
-	0x04, 0x5b,
-	0x05, 0x85,
-	0x06, 0x02,
-	0x07, 0x00,
-	0x08, 0x02,
-	0x09, 0x00,
-	0x0C, 0x01,
-	0x0D, 0x81,
-	0x0E, 0x44,
-	0x0f, 0x14,
-	0x10, 0x3c,
-	0x11, 0x84,
-	0x12, 0xda,
-	0x13, 0x97,
-	0x14, 0x95,
-	0x15, 0xc9,
-	0x16, 0x19,
-	0x17, 0x8c,
-	0x18, 0x59,
-	0x19, 0xf8,
-	0x1a, 0xfe,
-	0x1c, 0x7f,
-	0x1d, 0x00,
-	0x1e, 0x00,
-	0x1f, 0x50,
-	0x20, 0x00,
-	0x21, 0x00,
-	0x22, 0x00,
-	0x23, 0x00,
-	0x28, 0x00,
-	0x29, 0x28,
-	0x2a, 0x14,
-	0x2b, 0x0f,
-	0x2c, 0x09,
-	0x2d, 0x09,
-	0x31, 0x1f,
-	0x32, 0x19,
-	0x33, 0xfc,
-	0x34, 0x93,
-	0xff, 0xff
-};
-
-static int philips_su1278_tt_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
-{
-	stv0299_writereg(fe, 0x0e, 0x44);
-	if (srate >= 10000000) {
-		stv0299_writereg(fe, 0x13, 0x97);
-		stv0299_writereg(fe, 0x14, 0x95);
-		stv0299_writereg(fe, 0x15, 0xc9);
-		stv0299_writereg(fe, 0x17, 0x8c);
-		stv0299_writereg(fe, 0x1a, 0xfe);
-		stv0299_writereg(fe, 0x1c, 0x7f);
-		stv0299_writereg(fe, 0x2d, 0x09);
-	} else {
-		stv0299_writereg(fe, 0x13, 0x99);
-		stv0299_writereg(fe, 0x14, 0x8d);
-		stv0299_writereg(fe, 0x15, 0xce);
-		stv0299_writereg(fe, 0x17, 0x43);
-		stv0299_writereg(fe, 0x1a, 0x1d);
-		stv0299_writereg(fe, 0x1c, 0x12);
-		stv0299_writereg(fe, 0x2d, 0x05);
-	}
-	stv0299_writereg(fe, 0x0e, 0x23);
-	stv0299_writereg(fe, 0x0f, 0x94);
-	stv0299_writereg(fe, 0x10, 0x39);
-	stv0299_writereg(fe, 0x15, 0xc9);
-
-	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
-	stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
-	stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
-
-	return 0;
-}
-
-static int philips_su1278_tt_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
-	u32 div;
-	u8 buf[4];
-	struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) };
-
-	if ((p->frequency < 950000) || (p->frequency > 2150000))
-		return -EINVAL;
-
-	div = (p->frequency + (500 - 1)) / 500;	/* round correctly */
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = div & 0xff;
-	buf[2] = 0x80 | ((div & 0x18000) >> 10) | 2;
-	buf[3] = 0x20;
-
-	if (p->symbol_rate < 4000000)
-		buf[3] |= 1;
-
-	if (p->frequency < 1250000)
-		buf[3] |= 0;
-	else if (p->frequency < 1550000)
-		buf[3] |= 0x40;
-	else if (p->frequency < 2050000)
-		buf[3] |= 0x80;
-	else if (p->frequency < 2150000)
-		buf[3] |= 0xC0;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&budget_ci->budget.i2c_adap, &msg, 1) != 1)
-		return -EIO;
-	return 0;
-}
-
-static struct stv0299_config philips_su1278_tt_config = {
-
-	.demod_address = 0x68,
-	.inittab = philips_su1278_tt_inittab,
-	.mclk = 64000000UL,
-	.invert = 0,
-	.skip_reinit = 1,
-	.lock_output = STV0299_LOCKOUTPUT_1,
-	.volt13_op0_op1 = STV0299_VOLT13_OP1,
-	.min_delay_ms = 50,
-	.set_symbol_rate = philips_su1278_tt_set_symbol_rate,
-};
-
-
-
-static int philips_tdm1316l_tuner_init(struct dvb_frontend *fe)
-{
-	struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
-	static u8 td1316_init[] = { 0x0b, 0xf5, 0x85, 0xab };
-	static u8 disable_mc44BC374c[] = { 0x1d, 0x74, 0xa0, 0x68 };
-	struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = td1316_init,.len =
-			sizeof(td1316_init) };
-
-	// setup PLL configuration
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
-		return -EIO;
-	msleep(1);
-
-	// disable the mc44BC374c (do not check for errors)
-	tuner_msg.addr = 0x65;
-	tuner_msg.buf = disable_mc44BC374c;
-	tuner_msg.len = sizeof(disable_mc44BC374c);
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) {
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 1);
-		i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1);
-	}
-
-	return 0;
-}
-
-static int philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
-	u8 tuner_buf[4];
-	struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = tuner_buf,.len = sizeof(tuner_buf) };
-	int tuner_frequency = 0;
-	u8 band, cp, filter;
-
-	// determine charge pump
-	tuner_frequency = p->frequency + 36130000;
-	if (tuner_frequency < 87000000)
-		return -EINVAL;
-	else if (tuner_frequency < 130000000)
-		cp = 3;
-	else if (tuner_frequency < 160000000)
-		cp = 5;
-	else if (tuner_frequency < 200000000)
-		cp = 6;
-	else if (tuner_frequency < 290000000)
-		cp = 3;
-	else if (tuner_frequency < 420000000)
-		cp = 5;
-	else if (tuner_frequency < 480000000)
-		cp = 6;
-	else if (tuner_frequency < 620000000)
-		cp = 3;
-	else if (tuner_frequency < 830000000)
-		cp = 5;
-	else if (tuner_frequency < 895000000)
-		cp = 7;
-	else
-		return -EINVAL;
-
-	// determine band
-	if (p->frequency < 49000000)
-		return -EINVAL;
-	else if (p->frequency < 159000000)
-		band = 1;
-	else if (p->frequency < 444000000)
-		band = 2;
-	else if (p->frequency < 861000000)
-		band = 4;
-	else
-		return -EINVAL;
-
-	// setup PLL filter and TDA9889
-	switch (p->bandwidth_hz) {
-	case 6000000:
-		tda1004x_writereg(fe, 0x0C, 0x14);
-		filter = 0;
-		break;
-
-	case 7000000:
-		tda1004x_writereg(fe, 0x0C, 0x80);
-		filter = 0;
-		break;
-
-	case 8000000:
-		tda1004x_writereg(fe, 0x0C, 0x14);
-		filter = 1;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	// calculate divisor
-	// ((36130000+((1000000/6)/2)) + Finput)/(1000000/6)
-	tuner_frequency = (((p->frequency / 1000) * 6) + 217280) / 1000;
-
-	// setup tuner buffer
-	tuner_buf[0] = tuner_frequency >> 8;
-	tuner_buf[1] = tuner_frequency & 0xff;
-	tuner_buf[2] = 0xca;
-	tuner_buf[3] = (cp << 5) | (filter << 3) | band;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
-		return -EIO;
-
-	msleep(1);
-	return 0;
-}
-
-static int philips_tdm1316l_request_firmware(struct dvb_frontend *fe,
-					     const struct firmware **fw, char *name)
-{
-	struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
-
-	return request_firmware(fw, name, &budget_ci->budget.dev->pci->dev);
-}
-
-static struct tda1004x_config philips_tdm1316l_config = {
-
-	.demod_address = 0x8,
-	.invert = 0,
-	.invert_oclk = 0,
-	.xtal_freq = TDA10046_XTAL_4M,
-	.agc_config = TDA10046_AGC_DEFAULT,
-	.if_freq = TDA10046_FREQ_3617,
-	.request_firmware = philips_tdm1316l_request_firmware,
-};
-
-static struct tda1004x_config philips_tdm1316l_config_invert = {
-
-	.demod_address = 0x8,
-	.invert = 1,
-	.invert_oclk = 0,
-	.xtal_freq = TDA10046_XTAL_4M,
-	.agc_config = TDA10046_AGC_DEFAULT,
-	.if_freq = TDA10046_FREQ_3617,
-	.request_firmware = philips_tdm1316l_request_firmware,
-};
-
-static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
-	u8 tuner_buf[5];
-	struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,
-				    .flags = 0,
-				    .buf = tuner_buf,
-				    .len = sizeof(tuner_buf) };
-	int tuner_frequency = 0;
-	u8 band, cp, filter;
-
-	// determine charge pump
-	tuner_frequency = p->frequency + 36125000;
-	if (tuner_frequency < 87000000)
-		return -EINVAL;
-	else if (tuner_frequency < 130000000) {
-		cp = 3;
-		band = 1;
-	} else if (tuner_frequency < 160000000) {
-		cp = 5;
-		band = 1;
-	} else if (tuner_frequency < 200000000) {
-		cp = 6;
-		band = 1;
-	} else if (tuner_frequency < 290000000) {
-		cp = 3;
-		band = 2;
-	} else if (tuner_frequency < 420000000) {
-		cp = 5;
-		band = 2;
-	} else if (tuner_frequency < 480000000) {
-		cp = 6;
-		band = 2;
-	} else if (tuner_frequency < 620000000) {
-		cp = 3;
-		band = 4;
-	} else if (tuner_frequency < 830000000) {
-		cp = 5;
-		band = 4;
-	} else if (tuner_frequency < 895000000) {
-		cp = 7;
-		band = 4;
-	} else
-		return -EINVAL;
-
-	// assume PLL filter should always be 8MHz for the moment.
-	filter = 1;
-
-	// calculate divisor
-	tuner_frequency = (p->frequency + 36125000 + (62500/2)) / 62500;
-
-	// setup tuner buffer
-	tuner_buf[0] = tuner_frequency >> 8;
-	tuner_buf[1] = tuner_frequency & 0xff;
-	tuner_buf[2] = 0xc8;
-	tuner_buf[3] = (cp << 5) | (filter << 3) | band;
-	tuner_buf[4] = 0x80;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
-		return -EIO;
-
-	msleep(50);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
-		return -EIO;
-
-	msleep(1);
-
-	return 0;
-}
-
-static u8 dvbc_philips_tdm1316l_inittab[] = {
-	0x80, 0x01,
-	0x80, 0x00,
-	0x81, 0x01,
-	0x81, 0x00,
-	0x00, 0x09,
-	0x01, 0x69,
-	0x03, 0x00,
-	0x04, 0x00,
-	0x07, 0x00,
-	0x08, 0x00,
-	0x20, 0x00,
-	0x21, 0x40,
-	0x22, 0x00,
-	0x23, 0x00,
-	0x24, 0x40,
-	0x25, 0x88,
-	0x30, 0xff,
-	0x31, 0x00,
-	0x32, 0xff,
-	0x33, 0x00,
-	0x34, 0x50,
-	0x35, 0x7f,
-	0x36, 0x00,
-	0x37, 0x20,
-	0x38, 0x00,
-	0x40, 0x1c,
-	0x41, 0xff,
-	0x42, 0x29,
-	0x43, 0x20,
-	0x44, 0xff,
-	0x45, 0x00,
-	0x46, 0x00,
-	0x49, 0x04,
-	0x4a, 0x00,
-	0x4b, 0x7b,
-	0x52, 0x30,
-	0x55, 0xae,
-	0x56, 0x47,
-	0x57, 0xe1,
-	0x58, 0x3a,
-	0x5a, 0x1e,
-	0x5b, 0x34,
-	0x60, 0x00,
-	0x63, 0x00,
-	0x64, 0x00,
-	0x65, 0x00,
-	0x66, 0x00,
-	0x67, 0x00,
-	0x68, 0x00,
-	0x69, 0x00,
-	0x6a, 0x02,
-	0x6b, 0x00,
-	0x70, 0xff,
-	0x71, 0x00,
-	0x72, 0x00,
-	0x73, 0x00,
-	0x74, 0x0c,
-	0x80, 0x00,
-	0x81, 0x00,
-	0x82, 0x00,
-	0x83, 0x00,
-	0x84, 0x04,
-	0x85, 0x80,
-	0x86, 0x24,
-	0x87, 0x78,
-	0x88, 0x10,
-	0x89, 0x00,
-	0x90, 0x01,
-	0x91, 0x01,
-	0xa0, 0x04,
-	0xa1, 0x00,
-	0xa2, 0x00,
-	0xb0, 0x91,
-	0xb1, 0x0b,
-	0xc0, 0x53,
-	0xc1, 0x70,
-	0xc2, 0x12,
-	0xd0, 0x00,
-	0xd1, 0x00,
-	0xd2, 0x00,
-	0xd3, 0x00,
-	0xd4, 0x00,
-	0xd5, 0x00,
-	0xde, 0x00,
-	0xdf, 0x00,
-	0x61, 0x38,
-	0x62, 0x0a,
-	0x53, 0x13,
-	0x59, 0x08,
-	0xff, 0xff,
-};
-
-static struct stv0297_config dvbc_philips_tdm1316l_config = {
-	.demod_address = 0x1c,
-	.inittab = dvbc_philips_tdm1316l_inittab,
-	.invert = 0,
-	.stop_during_read = 1,
-};
-
-static struct tda10023_config tda10023_config = {
-	.demod_address = 0xc,
-	.invert = 0,
-	.xtal = 16000000,
-	.pll_m = 11,
-	.pll_p = 3,
-	.pll_n = 1,
-	.deltaf = 0xa511,
-};
-
-static struct tda827x_config tda827x_config = {
-	.config = 0,
-};
-
-/* TT S2-3200 DVB-S (STB0899) Inittab */
-static const struct stb0899_s1_reg tt3200_stb0899_s1_init_1[] = {
-
-	{ STB0899_DEV_ID		, 0x81 },
-	{ STB0899_DISCNTRL1		, 0x32 },
-	{ STB0899_DISCNTRL2     	, 0x80 },
-	{ STB0899_DISRX_ST0     	, 0x04 },
-	{ STB0899_DISRX_ST1     	, 0x00 },
-	{ STB0899_DISPARITY     	, 0x00 },
-	{ STB0899_DISSTATUS		, 0x20 },
-	{ STB0899_DISF22        	, 0x8c },
-	{ STB0899_DISF22RX      	, 0x9a },
-	{ STB0899_SYSREG		, 0x0b },
-	{ STB0899_ACRPRESC      	, 0x11 },
-	{ STB0899_ACRDIV1       	, 0x0a },
-	{ STB0899_ACRDIV2       	, 0x05 },
-	{ STB0899_DACR1         	, 0x00 },
-	{ STB0899_DACR2         	, 0x00 },
-	{ STB0899_OUTCFG        	, 0x00 },
-	{ STB0899_MODECFG       	, 0x00 },
-	{ STB0899_IRQSTATUS_3		, 0x30 },
-	{ STB0899_IRQSTATUS_2		, 0x00 },
-	{ STB0899_IRQSTATUS_1		, 0x00 },
-	{ STB0899_IRQSTATUS_0		, 0x00 },
-	{ STB0899_IRQMSK_3      	, 0xf3 },
-	{ STB0899_IRQMSK_2      	, 0xfc },
-	{ STB0899_IRQMSK_1      	, 0xff },
-	{ STB0899_IRQMSK_0		, 0xff },
-	{ STB0899_IRQCFG		, 0x00 },
-	{ STB0899_I2CCFG        	, 0x88 },
-	{ STB0899_I2CRPT        	, 0x48 }, /* 12k Pullup, Repeater=16, Stop=disabled */
-	{ STB0899_IOPVALUE5		, 0x00 },
-	{ STB0899_IOPVALUE4		, 0x20 },
-	{ STB0899_IOPVALUE3		, 0xc9 },
-	{ STB0899_IOPVALUE2		, 0x90 },
-	{ STB0899_IOPVALUE1		, 0x40 },
-	{ STB0899_IOPVALUE0		, 0x00 },
-	{ STB0899_GPIO00CFG     	, 0x82 },
-	{ STB0899_GPIO01CFG     	, 0x82 },
-	{ STB0899_GPIO02CFG     	, 0x82 },
-	{ STB0899_GPIO03CFG     	, 0x82 },
-	{ STB0899_GPIO04CFG     	, 0x82 },
-	{ STB0899_GPIO05CFG     	, 0x82 },
-	{ STB0899_GPIO06CFG     	, 0x82 },
-	{ STB0899_GPIO07CFG     	, 0x82 },
-	{ STB0899_GPIO08CFG     	, 0x82 },
-	{ STB0899_GPIO09CFG     	, 0x82 },
-	{ STB0899_GPIO10CFG     	, 0x82 },
-	{ STB0899_GPIO11CFG     	, 0x82 },
-	{ STB0899_GPIO12CFG     	, 0x82 },
-	{ STB0899_GPIO13CFG     	, 0x82 },
-	{ STB0899_GPIO14CFG     	, 0x82 },
-	{ STB0899_GPIO15CFG     	, 0x82 },
-	{ STB0899_GPIO16CFG     	, 0x82 },
-	{ STB0899_GPIO17CFG     	, 0x82 },
-	{ STB0899_GPIO18CFG     	, 0x82 },
-	{ STB0899_GPIO19CFG     	, 0x82 },
-	{ STB0899_GPIO20CFG     	, 0x82 },
-	{ STB0899_SDATCFG       	, 0xb8 },
-	{ STB0899_SCLTCFG       	, 0xba },
-	{ STB0899_AGCRFCFG      	, 0x1c }, /* 0x11 */
-	{ STB0899_GPIO22        	, 0x82 }, /* AGCBB2CFG */
-	{ STB0899_GPIO21        	, 0x91 }, /* AGCBB1CFG */
-	{ STB0899_DIRCLKCFG     	, 0x82 },
-	{ STB0899_CLKOUT27CFG   	, 0x7e },
-	{ STB0899_STDBYCFG      	, 0x82 },
-	{ STB0899_CS0CFG        	, 0x82 },
-	{ STB0899_CS1CFG        	, 0x82 },
-	{ STB0899_DISEQCOCFG    	, 0x20 },
-	{ STB0899_GPIO32CFG		, 0x82 },
-	{ STB0899_GPIO33CFG		, 0x82 },
-	{ STB0899_GPIO34CFG		, 0x82 },
-	{ STB0899_GPIO35CFG		, 0x82 },
-	{ STB0899_GPIO36CFG		, 0x82 },
-	{ STB0899_GPIO37CFG		, 0x82 },
-	{ STB0899_GPIO38CFG		, 0x82 },
-	{ STB0899_GPIO39CFG		, 0x82 },
-	{ STB0899_NCOARSE       	, 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */
-	{ STB0899_SYNTCTRL      	, 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */
-	{ STB0899_FILTCTRL      	, 0x00 },
-	{ STB0899_SYSCTRL       	, 0x00 },
-	{ STB0899_STOPCLK1      	, 0x20 },
-	{ STB0899_STOPCLK2      	, 0x00 },
-	{ STB0899_INTBUFSTATUS		, 0x00 },
-	{ STB0899_INTBUFCTRL    	, 0x0a },
-	{ 0xffff			, 0xff },
-};
-
-static const struct stb0899_s1_reg tt3200_stb0899_s1_init_3[] = {
-	{ STB0899_DEMOD         	, 0x00 },
-	{ STB0899_RCOMPC        	, 0xc9 },
-	{ STB0899_AGC1CN        	, 0x41 },
-	{ STB0899_AGC1REF       	, 0x10 },
-	{ STB0899_RTC			, 0x7a },
-	{ STB0899_TMGCFG        	, 0x4e },
-	{ STB0899_AGC2REF       	, 0x34 },
-	{ STB0899_TLSR          	, 0x84 },
-	{ STB0899_CFD           	, 0xc7 },
-	{ STB0899_ACLC			, 0x87 },
-	{ STB0899_BCLC          	, 0x94 },
-	{ STB0899_EQON          	, 0x41 },
-	{ STB0899_LDT           	, 0xdd },
-	{ STB0899_LDT2          	, 0xc9 },
-	{ STB0899_EQUALREF      	, 0xb4 },
-	{ STB0899_TMGRAMP       	, 0x10 },
-	{ STB0899_TMGTHD        	, 0x30 },
-	{ STB0899_IDCCOMP		, 0xfb },
-	{ STB0899_QDCCOMP		, 0x03 },
-	{ STB0899_POWERI		, 0x3b },
-	{ STB0899_POWERQ		, 0x3d },
-	{ STB0899_RCOMP			, 0x81 },
-	{ STB0899_AGCIQIN		, 0x80 },
-	{ STB0899_AGC2I1		, 0x04 },
-	{ STB0899_AGC2I2		, 0xf5 },
-	{ STB0899_TLIR			, 0x25 },
-	{ STB0899_RTF			, 0x80 },
-	{ STB0899_DSTATUS		, 0x00 },
-	{ STB0899_LDI			, 0xca },
-	{ STB0899_CFRM			, 0xf1 },
-	{ STB0899_CFRL			, 0xf3 },
-	{ STB0899_NIRM			, 0x2a },
-	{ STB0899_NIRL			, 0x05 },
-	{ STB0899_ISYMB			, 0x17 },
-	{ STB0899_QSYMB			, 0xfa },
-	{ STB0899_SFRH          	, 0x2f },
-	{ STB0899_SFRM          	, 0x68 },
-	{ STB0899_SFRL          	, 0x40 },
-	{ STB0899_SFRUPH        	, 0x2f },
-	{ STB0899_SFRUPM        	, 0x68 },
-	{ STB0899_SFRUPL        	, 0x40 },
-	{ STB0899_EQUAI1		, 0xfd },
-	{ STB0899_EQUAQ1		, 0x04 },
-	{ STB0899_EQUAI2		, 0x0f },
-	{ STB0899_EQUAQ2		, 0xff },
-	{ STB0899_EQUAI3		, 0xdf },
-	{ STB0899_EQUAQ3		, 0xfa },
-	{ STB0899_EQUAI4		, 0x37 },
-	{ STB0899_EQUAQ4		, 0x0d },
-	{ STB0899_EQUAI5		, 0xbd },
-	{ STB0899_EQUAQ5		, 0xf7 },
-	{ STB0899_DSTATUS2		, 0x00 },
-	{ STB0899_VSTATUS       	, 0x00 },
-	{ STB0899_VERROR		, 0xff },
-	{ STB0899_IQSWAP		, 0x2a },
-	{ STB0899_ECNT1M		, 0x00 },
-	{ STB0899_ECNT1L		, 0x00 },
-	{ STB0899_ECNT2M		, 0x00 },
-	{ STB0899_ECNT2L		, 0x00 },
-	{ STB0899_ECNT3M		, 0x00 },
-	{ STB0899_ECNT3L		, 0x00 },
-	{ STB0899_FECAUTO1      	, 0x06 },
-	{ STB0899_FECM			, 0x01 },
-	{ STB0899_VTH12         	, 0xf0 },
-	{ STB0899_VTH23         	, 0xa0 },
-	{ STB0899_VTH34			, 0x78 },
-	{ STB0899_VTH56         	, 0x4e },
-	{ STB0899_VTH67         	, 0x48 },
-	{ STB0899_VTH78         	, 0x38 },
-	{ STB0899_PRVIT         	, 0xff },
-	{ STB0899_VITSYNC       	, 0x19 },
-	{ STB0899_RSULC         	, 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
-	{ STB0899_TSULC         	, 0x42 },
-	{ STB0899_RSLLC         	, 0x40 },
-	{ STB0899_TSLPL			, 0x12 },
-	{ STB0899_TSCFGH        	, 0x0c },
-	{ STB0899_TSCFGM        	, 0x00 },
-	{ STB0899_TSCFGL        	, 0x0c },
-	{ STB0899_TSOUT			, 0x4d }, /* 0x0d for CAM */
-	{ STB0899_RSSYNCDEL     	, 0x00 },
-	{ STB0899_TSINHDELH     	, 0x02 },
-	{ STB0899_TSINHDELM		, 0x00 },
-	{ STB0899_TSINHDELL		, 0x00 },
-	{ STB0899_TSLLSTKM		, 0x00 },
-	{ STB0899_TSLLSTKL		, 0x00 },
-	{ STB0899_TSULSTKM		, 0x00 },
-	{ STB0899_TSULSTKL		, 0xab },
-	{ STB0899_PCKLENUL		, 0x00 },
-	{ STB0899_PCKLENLL		, 0xcc },
-	{ STB0899_RSPCKLEN		, 0xcc },
-	{ STB0899_TSSTATUS		, 0x80 },
-	{ STB0899_ERRCTRL1      	, 0xb6 },
-	{ STB0899_ERRCTRL2      	, 0x96 },
-	{ STB0899_ERRCTRL3      	, 0x89 },
-	{ STB0899_DMONMSK1		, 0x27 },
-	{ STB0899_DMONMSK0		, 0x03 },
-	{ STB0899_DEMAPVIT      	, 0x5c },
-	{ STB0899_PLPARM		, 0x1f },
-	{ STB0899_PDELCTRL      	, 0x48 },
-	{ STB0899_PDELCTRL2     	, 0x00 },
-	{ STB0899_BBHCTRL1      	, 0x00 },
-	{ STB0899_BBHCTRL2      	, 0x00 },
-	{ STB0899_HYSTTHRESH    	, 0x77 },
-	{ STB0899_MATCSTM		, 0x00 },
-	{ STB0899_MATCSTL		, 0x00 },
-	{ STB0899_UPLCSTM		, 0x00 },
-	{ STB0899_UPLCSTL		, 0x00 },
-	{ STB0899_DFLCSTM		, 0x00 },
-	{ STB0899_DFLCSTL		, 0x00 },
-	{ STB0899_SYNCCST		, 0x00 },
-	{ STB0899_SYNCDCSTM		, 0x00 },
-	{ STB0899_SYNCDCSTL		, 0x00 },
-	{ STB0899_ISI_ENTRY		, 0x00 },
-	{ STB0899_ISI_BIT_EN		, 0x00 },
-	{ STB0899_MATSTRM		, 0x00 },
-	{ STB0899_MATSTRL		, 0x00 },
-	{ STB0899_UPLSTRM		, 0x00 },
-	{ STB0899_UPLSTRL		, 0x00 },
-	{ STB0899_DFLSTRM		, 0x00 },
-	{ STB0899_DFLSTRL		, 0x00 },
-	{ STB0899_SYNCSTR		, 0x00 },
-	{ STB0899_SYNCDSTRM		, 0x00 },
-	{ STB0899_SYNCDSTRL		, 0x00 },
-	{ STB0899_CFGPDELSTATUS1	, 0x10 },
-	{ STB0899_CFGPDELSTATUS2	, 0x00 },
-	{ STB0899_BBFERRORM		, 0x00 },
-	{ STB0899_BBFERRORL		, 0x00 },
-	{ STB0899_UPKTERRORM		, 0x00 },
-	{ STB0899_UPKTERRORL		, 0x00 },
-	{ 0xffff			, 0xff },
-};
-
-static struct stb0899_config tt3200_config = {
-	.init_dev		= tt3200_stb0899_s1_init_1,
-	.init_s2_demod		= stb0899_s2_init_2,
-	.init_s1_demod		= tt3200_stb0899_s1_init_3,
-	.init_s2_fec		= stb0899_s2_init_4,
-	.init_tst		= stb0899_s1_init_5,
-
-	.postproc		= NULL,
-
-	.demod_address 		= 0x68,
-
-	.xtal_freq		= 27000000,
-	.inversion		= IQ_SWAP_ON, /* 1 */
-
-	.lo_clk			= 76500000,
-	.hi_clk			= 99000000,
-
-	.esno_ave		= STB0899_DVBS2_ESNO_AVE,
-	.esno_quant		= STB0899_DVBS2_ESNO_QUANT,
-	.avframes_coarse	= STB0899_DVBS2_AVFRAMES_COARSE,
-	.avframes_fine		= STB0899_DVBS2_AVFRAMES_FINE,
-	.miss_threshold		= STB0899_DVBS2_MISS_THRESHOLD,
-	.uwp_threshold_acq	= STB0899_DVBS2_UWP_THRESHOLD_ACQ,
-	.uwp_threshold_track	= STB0899_DVBS2_UWP_THRESHOLD_TRACK,
-	.uwp_threshold_sof	= STB0899_DVBS2_UWP_THRESHOLD_SOF,
-	.sof_search_timeout	= STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
-
-	.btr_nco_bits		= STB0899_DVBS2_BTR_NCO_BITS,
-	.btr_gain_shift_offset	= STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
-	.crl_nco_bits		= STB0899_DVBS2_CRL_NCO_BITS,
-	.ldpc_max_iter		= STB0899_DVBS2_LDPC_MAX_ITER,
-
-	.tuner_get_frequency	= stb6100_get_frequency,
-	.tuner_set_frequency	= stb6100_set_frequency,
-	.tuner_set_bandwidth	= stb6100_set_bandwidth,
-	.tuner_get_bandwidth	= stb6100_get_bandwidth,
-	.tuner_set_rfsiggain	= NULL
-};
-
-static struct stb6100_config tt3200_stb6100_config = {
-	.tuner_address	= 0x60,
-	.refclock	= 27000000,
-};
-
-static void frontend_init(struct budget_ci *budget_ci)
-{
-	switch (budget_ci->budget.dev->pci->subsystem_device) {
-	case 0x100c:		// Hauppauge/TT Nova-CI budget (stv0299/ALPS BSRU6(tsa5059))
-		budget_ci->budget.dvb_frontend =
-			dvb_attach(stv0299_attach, &alps_bsru6_config, &budget_ci->budget.i2c_adap);
-		if (budget_ci->budget.dvb_frontend) {
-			budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
-			budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap;
-			break;
-		}
-		break;
-
-	case 0x100f:		// Hauppauge/TT Nova-CI budget (stv0299b/Philips su1278(tsa5059))
-		budget_ci->budget.dvb_frontend =
-			dvb_attach(stv0299_attach, &philips_su1278_tt_config, &budget_ci->budget.i2c_adap);
-		if (budget_ci->budget.dvb_frontend) {
-			budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_su1278_tt_tuner_set_params;
-			break;
-		}
-		break;
-
-	case 0x1010:		// TT DVB-C CI budget (stv0297/Philips tdm1316l(tda6651tt))
-		budget_ci->tuner_pll_address = 0x61;
-		budget_ci->budget.dvb_frontend =
-			dvb_attach(stv0297_attach, &dvbc_philips_tdm1316l_config, &budget_ci->budget.i2c_adap);
-		if (budget_ci->budget.dvb_frontend) {
-			budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = dvbc_philips_tdm1316l_tuner_set_params;
-			break;
-		}
-		break;
-
-	case 0x1011:		// Hauppauge/TT Nova-T budget (tda10045/Philips tdm1316l(tda6651tt) + TDA9889)
-		budget_ci->tuner_pll_address = 0x63;
-		budget_ci->budget.dvb_frontend =
-			dvb_attach(tda10045_attach, &philips_tdm1316l_config, &budget_ci->budget.i2c_adap);
-		if (budget_ci->budget.dvb_frontend) {
-			budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init;
-			budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params;
-			break;
-		}
-		break;
-
-	case 0x1012:		// TT DVB-T CI budget (tda10046/Philips tdm1316l(tda6651tt))
-		budget_ci->tuner_pll_address = 0x60;
-		budget_ci->budget.dvb_frontend =
-			dvb_attach(tda10046_attach, &philips_tdm1316l_config_invert, &budget_ci->budget.i2c_adap);
-		if (budget_ci->budget.dvb_frontend) {
-			budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init;
-			budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params;
-			break;
-		}
-		break;
-
-	case 0x1017:		// TT S-1500 PCI
-		budget_ci->budget.dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config, &budget_ci->budget.i2c_adap);
-		if (budget_ci->budget.dvb_frontend) {
-			budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params;
-			budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap;
-
-			budget_ci->budget.dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
-			if (dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, LNBP21_LLC, 0) == NULL) {
-				printk("%s: No LNBP21 found!\n", __func__);
-				dvb_frontend_detach(budget_ci->budget.dvb_frontend);
-				budget_ci->budget.dvb_frontend = NULL;
-			}
-		}
-		break;
-
-	case 0x101a: /* TT Budget-C-1501 (philips tda10023/philips tda8274A) */
-		budget_ci->budget.dvb_frontend = dvb_attach(tda10023_attach, &tda10023_config, &budget_ci->budget.i2c_adap, 0x48);
-		if (budget_ci->budget.dvb_frontend) {
-			if (dvb_attach(tda827x_attach, budget_ci->budget.dvb_frontend, 0x61, &budget_ci->budget.i2c_adap, &tda827x_config) == NULL) {
-				printk(KERN_ERR "%s: No tda827x found!\n", __func__);
-				dvb_frontend_detach(budget_ci->budget.dvb_frontend);
-				budget_ci->budget.dvb_frontend = NULL;
-			}
-		}
-		break;
-
-	case 0x101b: /* TT S-1500B (BSBE1-D01A - STV0288/STB6000/LNBP21) */
-		budget_ci->budget.dvb_frontend = dvb_attach(stv0288_attach, &stv0288_bsbe1_d01a_config, &budget_ci->budget.i2c_adap);
-		if (budget_ci->budget.dvb_frontend) {
-			if (dvb_attach(stb6000_attach, budget_ci->budget.dvb_frontend, 0x63, &budget_ci->budget.i2c_adap)) {
-				if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) {
-					printk(KERN_ERR "%s: No LNBP21 found!\n", __func__);
-					dvb_frontend_detach(budget_ci->budget.dvb_frontend);
-					budget_ci->budget.dvb_frontend = NULL;
-				}
-			} else {
-				printk(KERN_ERR "%s: No STB6000 found!\n", __func__);
-				dvb_frontend_detach(budget_ci->budget.dvb_frontend);
-				budget_ci->budget.dvb_frontend = NULL;
-			}
-		}
-		break;
-
-	case 0x1019:		// TT S2-3200 PCI
-		/*
-		 * NOTE! on some STB0899 versions, the internal PLL takes a longer time
-		 * to settle, aka LOCK. On the older revisions of the chip, we don't see
-		 * this, as a result on the newer chips the entire clock tree, will not
-		 * be stable after a freshly POWER 'ed up situation.
-		 * In this case, we should RESET the STB0899 (Active LOW) and wait for
-		 * PLL stabilization.
-		 *
-		 * On the TT S2 3200 and clones, the STB0899 demodulator's RESETB is
-		 * connected to the SAA7146 GPIO, GPIO2, Pin 142
-		 */
-		/* Reset Demodulator */
-		saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTLO);
-		/* Wait for everything to die */
-		msleep(50);
-		/* Pull it up out of Reset state */
-		saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTHI);
-		/* Wait for PLL to stabilize */
-		msleep(250);
-		/*
-		 * PLL state should be stable now. Ideally, we should check
-		 * for PLL LOCK status. But well, never mind!
-		 */
-		budget_ci->budget.dvb_frontend = dvb_attach(stb0899_attach, &tt3200_config, &budget_ci->budget.i2c_adap);
-		if (budget_ci->budget.dvb_frontend) {
-			if (dvb_attach(stb6100_attach, budget_ci->budget.dvb_frontend, &tt3200_stb6100_config, &budget_ci->budget.i2c_adap)) {
-				if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) {
-					printk("%s: No LNBP21 found!\n", __func__);
-					dvb_frontend_detach(budget_ci->budget.dvb_frontend);
-					budget_ci->budget.dvb_frontend = NULL;
-				}
-			} else {
-					dvb_frontend_detach(budget_ci->budget.dvb_frontend);
-					budget_ci->budget.dvb_frontend = NULL;
-			}
-		}
-		break;
-
-	}
-
-	if (budget_ci->budget.dvb_frontend == NULL) {
-		printk("budget-ci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
-		       budget_ci->budget.dev->pci->vendor,
-		       budget_ci->budget.dev->pci->device,
-		       budget_ci->budget.dev->pci->subsystem_vendor,
-		       budget_ci->budget.dev->pci->subsystem_device);
-	} else {
-		if (dvb_register_frontend
-		    (&budget_ci->budget.dvb_adapter, budget_ci->budget.dvb_frontend)) {
-			printk("budget-ci: Frontend registration failed!\n");
-			dvb_frontend_detach(budget_ci->budget.dvb_frontend);
-			budget_ci->budget.dvb_frontend = NULL;
-		}
-	}
-}
-
-static int budget_ci_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
-{
-	struct budget_ci *budget_ci;
-	int err;
-
-	budget_ci = kzalloc(sizeof(struct budget_ci), GFP_KERNEL);
-	if (!budget_ci) {
-		err = -ENOMEM;
-		goto out1;
-	}
-
-	dprintk(2, "budget_ci: %p\n", budget_ci);
-
-	dev->ext_priv = budget_ci;
-
-	err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE,
-				adapter_nr);
-	if (err)
-		goto out2;
-
-	err = msp430_ir_init(budget_ci);
-	if (err)
-		goto out3;
-
-	ciintf_init(budget_ci);
-
-	budget_ci->budget.dvb_adapter.priv = budget_ci;
-	frontend_init(budget_ci);
-
-	ttpci_budget_init_hooks(&budget_ci->budget);
-
-	return 0;
-
-out3:
-	ttpci_budget_deinit(&budget_ci->budget);
-out2:
-	kfree(budget_ci);
-out1:
-	return err;
-}
-
-static int budget_ci_detach(struct saa7146_dev *dev)
-{
-	struct budget_ci *budget_ci = (struct budget_ci *) dev->ext_priv;
-	struct saa7146_dev *saa = budget_ci->budget.dev;
-	int err;
-
-	if (budget_ci->budget.ci_present)
-		ciintf_deinit(budget_ci);
-	msp430_ir_deinit(budget_ci);
-	if (budget_ci->budget.dvb_frontend) {
-		dvb_unregister_frontend(budget_ci->budget.dvb_frontend);
-		dvb_frontend_detach(budget_ci->budget.dvb_frontend);
-	}
-	err = ttpci_budget_deinit(&budget_ci->budget);
-
-	// disable frontend and CI interface
-	saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT);
-
-	kfree(budget_ci);
-
-	return err;
-}
-
-static struct saa7146_extension budget_extension;
-
-MAKE_BUDGET_INFO(ttbs2, "TT-Budget/S-1500 PCI", BUDGET_TT);
-MAKE_BUDGET_INFO(ttbci, "TT-Budget/WinTV-NOVA-CI PCI", BUDGET_TT_HW_DISEQC);
-MAKE_BUDGET_INFO(ttbt2, "TT-Budget/WinTV-NOVA-T	 PCI", BUDGET_TT);
-MAKE_BUDGET_INFO(ttbtci, "TT-Budget-T-CI PCI", BUDGET_TT);
-MAKE_BUDGET_INFO(ttbcci, "TT-Budget-C-CI PCI", BUDGET_TT);
-MAKE_BUDGET_INFO(ttc1501, "TT-Budget C-1501 PCI", BUDGET_TT);
-MAKE_BUDGET_INFO(tt3200, "TT-Budget S2-3200 PCI", BUDGET_TT);
-MAKE_BUDGET_INFO(ttbs1500b, "TT-Budget S-1500B PCI", BUDGET_TT);
-
-static struct pci_device_id pci_tbl[] = {
-	MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100c),
-	MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100f),
-	MAKE_EXTENSION_PCI(ttbcci, 0x13c2, 0x1010),
-	MAKE_EXTENSION_PCI(ttbt2, 0x13c2, 0x1011),
-	MAKE_EXTENSION_PCI(ttbtci, 0x13c2, 0x1012),
-	MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017),
-	MAKE_EXTENSION_PCI(ttc1501, 0x13c2, 0x101a),
-	MAKE_EXTENSION_PCI(tt3200, 0x13c2, 0x1019),
-	MAKE_EXTENSION_PCI(ttbs1500b, 0x13c2, 0x101b),
-	{
-	 .vendor = 0,
-	 }
-};
-
-MODULE_DEVICE_TABLE(pci, pci_tbl);
-
-static struct saa7146_extension budget_extension = {
-	.name = "budget_ci dvb",
-	.flags = SAA7146_USE_I2C_IRQ,
-
-	.module = THIS_MODULE,
-	.pci_tbl = &pci_tbl[0],
-	.attach = budget_ci_attach,
-	.detach = budget_ci_detach,
-
-	.irq_mask = MASK_03 | MASK_06 | MASK_10,
-	.irq_func = budget_ci_irq,
-};
-
-static int __init budget_ci_init(void)
-{
-	return saa7146_register_extension(&budget_extension);
-}
-
-static void __exit budget_ci_exit(void)
-{
-	saa7146_unregister_extension(&budget_extension);
-}
-
-module_init(budget_ci_init);
-module_exit(budget_ci_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Michael Hunold, Jack Thomasson, Andrew de Quincey, others");
-MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
-		   "budget PCI DVB cards w/ CI-module produced by "
-		   "Siemens, Technotrend, Hauppauge");
diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c
deleted file mode 100644
index 37d02fe..0000000
--- a/drivers/media/dvb/ttpci/budget-core.c
+++ /dev/null
@@ -1,602 +0,0 @@
-/*
- * budget-core.c: driver for the SAA7146 based Budget DVB cards
- *
- * Compiled from various sources by Michael Hunold <michael@mihu.de>
- *
- * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
- *
- * Copyright (C) 1999-2002 Ralph  Metzler
- *			 & Marcus Metzler for convergence integrated media GmbH
- *
- * 26feb2004 Support for FS Activy Card (Grundig tuner) by
- *	     Michael Dreher <michael@5dot1.de>,
- *	     Oliver Endriss <o.endriss@gmx.de>,
- *	     Andreas 'randy' Weinberger
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org/ 
- */
-
-
-#include "budget.h"
-#include "ttpci-eeprom.h"
-
-#define TS_WIDTH		(2 * TS_SIZE)
-#define TS_WIDTH_ACTIVY		TS_SIZE
-#define TS_WIDTH_DVBC		TS_SIZE
-#define TS_HEIGHT_MASK		0xf00
-#define TS_HEIGHT_MASK_ACTIVY	0xc00
-#define TS_HEIGHT_MASK_DVBC	0xe00
-#define TS_MIN_BUFSIZE_K	188
-#define TS_MAX_BUFSIZE_K	1410
-#define TS_MAX_BUFSIZE_K_ACTIVY	564
-#define TS_MAX_BUFSIZE_K_DVBC	1316
-#define BUFFER_WARNING_WAIT	(30*HZ)
-
-int budget_debug;
-static int dma_buffer_size = TS_MIN_BUFSIZE_K;
-module_param_named(debug, budget_debug, int, 0644);
-module_param_named(bufsize, dma_buffer_size, int, 0444);
-MODULE_PARM_DESC(debug, "Turn on/off budget debugging (default:off).");
-MODULE_PARM_DESC(bufsize, "DMA buffer size in KB, default: 188, min: 188, max: 1410 (Activy: 564)");
-
-/****************************************************************************
- * TT budget / WinTV Nova
- ****************************************************************************/
-
-static int stop_ts_capture(struct budget *budget)
-{
-	dprintk(2, "budget: %p\n", budget);
-
-	saa7146_write(budget->dev, MC1, MASK_20);	// DMA3 off
-	SAA7146_IER_DISABLE(budget->dev, MASK_10);
-	return 0;
-}
-
-static int start_ts_capture(struct budget *budget)
-{
-	struct saa7146_dev *dev = budget->dev;
-
-	dprintk(2, "budget: %p\n", budget);
-
-	if (!budget->feeding || !budget->fe_synced)
-		return 0;
-
-	saa7146_write(dev, MC1, MASK_20);	// DMA3 off
-
-	memset(budget->grabbing, 0x00, budget->buffer_size);
-
-	saa7146_write(dev, PCI_BT_V1, 0x001c0000 | (saa7146_read(dev, PCI_BT_V1) & ~0x001f0000));
-
-	budget->ttbp = 0;
-
-	/*
-	 *  Signal path on the Activy:
-	 *
-	 *  tuner -> SAA7146 port A -> SAA7146 BRS -> SAA7146 DMA3 -> memory
-	 *
-	 *  Since the tuner feeds 204 bytes packets into the SAA7146,
-	 *  DMA3 is configured to strip the trailing 16 FEC bytes:
-	 *      Pitch: 188, NumBytes3: 188, NumLines3: 1024
-	 */
-
-	switch(budget->card->type) {
-	case BUDGET_FS_ACTIVY:
-		saa7146_write(dev, DD1_INIT, 0x04000000);
-		saa7146_write(dev, MC2, (MASK_09 | MASK_25));
-		saa7146_write(dev, BRS_CTRL, 0x00000000);
-		break;
-	case BUDGET_PATCH:
-		saa7146_write(dev, DD1_INIT, 0x00000200);
-		saa7146_write(dev, MC2, (MASK_10 | MASK_26));
-		saa7146_write(dev, BRS_CTRL, 0x60000000);
-		break;
-	case BUDGET_CIN1200C_MK3:
-	case BUDGET_KNC1C_MK3:
-	case BUDGET_KNC1C_TDA10024:
-	case BUDGET_KNC1CP_MK3:
-		if (budget->video_port == BUDGET_VIDEO_PORTA) {
-			saa7146_write(dev, DD1_INIT, 0x06000200);
-			saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
-			saa7146_write(dev, BRS_CTRL, 0x00000000);
-		} else {
-			saa7146_write(dev, DD1_INIT, 0x00000600);
-			saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
-			saa7146_write(dev, BRS_CTRL, 0x60000000);
-		}
-		break;
-	default:
-		if (budget->video_port == BUDGET_VIDEO_PORTA) {
-			saa7146_write(dev, DD1_INIT, 0x06000200);
-			saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
-			saa7146_write(dev, BRS_CTRL, 0x00000000);
-		} else {
-			saa7146_write(dev, DD1_INIT, 0x02000600);
-			saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
-			saa7146_write(dev, BRS_CTRL, 0x60000000);
-		}
-	}
-
-	saa7146_write(dev, MC2, (MASK_08 | MASK_24));
-	mdelay(10);
-
-	saa7146_write(dev, BASE_ODD3, 0);
-	if (budget->buffer_size > budget->buffer_height * budget->buffer_width) {
-		// using odd/even buffers
-		saa7146_write(dev, BASE_EVEN3, budget->buffer_height * budget->buffer_width);
-	} else {
-		// using a single buffer
-		saa7146_write(dev, BASE_EVEN3, 0);
-	}
-	saa7146_write(dev, PROT_ADDR3, budget->buffer_size);
-	saa7146_write(dev, BASE_PAGE3, budget->pt.dma | ME1 | 0x90);
-
-	saa7146_write(dev, PITCH3, budget->buffer_width);
-	saa7146_write(dev, NUM_LINE_BYTE3,
-			(budget->buffer_height << 16) | budget->buffer_width);
-
-	saa7146_write(dev, MC2, (MASK_04 | MASK_20));
-
-	SAA7146_ISR_CLEAR(budget->dev, MASK_10);	/* VPE */
-	SAA7146_IER_ENABLE(budget->dev, MASK_10);	/* VPE */
-	saa7146_write(dev, MC1, (MASK_04 | MASK_20));	/* DMA3 on */
-
-	return 0;
-}
-
-static int budget_read_fe_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct budget *budget = (struct budget *) fe->dvb->priv;
-	int synced;
-	int ret;
-
-	if (budget->read_fe_status)
-		ret = budget->read_fe_status(fe, status);
-	else
-		ret = -EINVAL;
-
-	if (!ret) {
-		synced = (*status & FE_HAS_LOCK);
-		if (synced != budget->fe_synced) {
-			budget->fe_synced = synced;
-			spin_lock(&budget->feedlock);
-			if (synced)
-				start_ts_capture(budget);
-			else
-				stop_ts_capture(budget);
-			spin_unlock(&budget->feedlock);
-		}
-	}
-	return ret;
-}
-
-static void vpeirq(unsigned long data)
-{
-	struct budget *budget = (struct budget *) data;
-	u8 *mem = (u8 *) (budget->grabbing);
-	u32 olddma = budget->ttbp;
-	u32 newdma = saa7146_read(budget->dev, PCI_VDP3);
-	u32 count;
-
-	/* Ensure streamed PCI data is synced to CPU */
-	pci_dma_sync_sg_for_cpu(budget->dev->pci, budget->pt.slist, budget->pt.nents, PCI_DMA_FROMDEVICE);
-
-	/* nearest lower position divisible by 188 */
-	newdma -= newdma % 188;
-
-	if (newdma >= budget->buffer_size)
-		return;
-
-	budget->ttbp = newdma;
-
-	if (budget->feeding == 0 || newdma == olddma)
-		return;
-
-	if (newdma > olddma) {	/* no wraparound, dump olddma..newdma */
-		count = newdma - olddma;
-		dvb_dmx_swfilter_packets(&budget->demux, mem + olddma, count / 188);
-	} else {		/* wraparound, dump olddma..buflen and 0..newdma */
-		count = budget->buffer_size - olddma;
-		dvb_dmx_swfilter_packets(&budget->demux, mem + olddma, count / 188);
-		count += newdma;
-		dvb_dmx_swfilter_packets(&budget->demux, mem, newdma / 188);
-	}
-
-	if (count > budget->buffer_warning_threshold)
-		budget->buffer_warnings++;
-
-	if (budget->buffer_warnings && time_after(jiffies, budget->buffer_warning_time)) {
-		printk("%s %s: used %d times >80%% of buffer (%u bytes now)\n",
-			budget->dev->name, __func__, budget->buffer_warnings, count);
-		budget->buffer_warning_time = jiffies + BUFFER_WARNING_WAIT;
-		budget->buffer_warnings = 0;
-	}
-}
-
-
-int ttpci_budget_debiread(struct budget *budget, u32 config, int addr, int count,
-			  int uselocks, int nobusyloop)
-{
-	struct saa7146_dev *saa = budget->dev;
-	int result = 0;
-	unsigned long flags = 0;
-
-	if (count > 4 || count <= 0)
-		return 0;
-
-	if (uselocks)
-		spin_lock_irqsave(&budget->debilock, flags);
-
-	if ((result = saa7146_wait_for_debi_done(saa, nobusyloop)) < 0) {
-		if (uselocks)
-			spin_unlock_irqrestore(&budget->debilock, flags);
-		return result;
-	}
-
-	saa7146_write(saa, DEBI_COMMAND, (count << 17) | 0x10000 | (addr & 0xffff));
-	saa7146_write(saa, DEBI_CONFIG, config);
-	saa7146_write(saa, DEBI_PAGE, 0);
-	saa7146_write(saa, MC2, (2 << 16) | 2);
-
-	if ((result = saa7146_wait_for_debi_done(saa, nobusyloop)) < 0) {
-		if (uselocks)
-			spin_unlock_irqrestore(&budget->debilock, flags);
-		return result;
-	}
-
-	result = saa7146_read(saa, DEBI_AD);
-	result &= (0xffffffffUL >> ((4 - count) * 8));
-
-	if (uselocks)
-		spin_unlock_irqrestore(&budget->debilock, flags);
-
-	return result;
-}
-
-int ttpci_budget_debiwrite(struct budget *budget, u32 config, int addr,
-			   int count, u32 value, int uselocks, int nobusyloop)
-{
-	struct saa7146_dev *saa = budget->dev;
-	unsigned long flags = 0;
-	int result;
-
-	if (count > 4 || count <= 0)
-		return 0;
-
-	if (uselocks)
-		spin_lock_irqsave(&budget->debilock, flags);
-
-	if ((result = saa7146_wait_for_debi_done(saa, nobusyloop)) < 0) {
-		if (uselocks)
-			spin_unlock_irqrestore(&budget->debilock, flags);
-		return result;
-	}
-
-	saa7146_write(saa, DEBI_COMMAND, (count << 17) | 0x00000 | (addr & 0xffff));
-	saa7146_write(saa, DEBI_CONFIG, config);
-	saa7146_write(saa, DEBI_PAGE, 0);
-	saa7146_write(saa, DEBI_AD, value);
-	saa7146_write(saa, MC2, (2 << 16) | 2);
-
-	if ((result = saa7146_wait_for_debi_done(saa, nobusyloop)) < 0) {
-		if (uselocks)
-			spin_unlock_irqrestore(&budget->debilock, flags);
-		return result;
-	}
-
-	if (uselocks)
-		spin_unlock_irqrestore(&budget->debilock, flags);
-	return 0;
-}
-
-
-/****************************************************************************
- * DVB API SECTION
- ****************************************************************************/
-
-static int budget_start_feed(struct dvb_demux_feed *feed)
-{
-	struct dvb_demux *demux = feed->demux;
-	struct budget *budget = (struct budget *) demux->priv;
-	int status = 0;
-
-	dprintk(2, "budget: %p\n", budget);
-
-	if (!demux->dmx.frontend)
-		return -EINVAL;
-
-	spin_lock(&budget->feedlock);
-	feed->pusi_seen = 0; /* have a clean section start */
-	if (budget->feeding++ == 0)
-		status = start_ts_capture(budget);
-	spin_unlock(&budget->feedlock);
-	return status;
-}
-
-static int budget_stop_feed(struct dvb_demux_feed *feed)
-{
-	struct dvb_demux *demux = feed->demux;
-	struct budget *budget = (struct budget *) demux->priv;
-	int status = 0;
-
-	dprintk(2, "budget: %p\n", budget);
-
-	spin_lock(&budget->feedlock);
-	if (--budget->feeding == 0)
-		status = stop_ts_capture(budget);
-	spin_unlock(&budget->feedlock);
-	return status;
-}
-
-static int budget_register(struct budget *budget)
-{
-	struct dvb_demux *dvbdemux = &budget->demux;
-	int ret;
-
-	dprintk(2, "budget: %p\n", budget);
-
-	dvbdemux->priv = (void *) budget;
-
-	dvbdemux->filternum = 256;
-	dvbdemux->feednum = 256;
-	dvbdemux->start_feed = budget_start_feed;
-	dvbdemux->stop_feed = budget_stop_feed;
-	dvbdemux->write_to_decoder = NULL;
-
-	dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING |
-				      DMX_MEMORY_BASED_FILTERING);
-
-	dvb_dmx_init(&budget->demux);
-
-	budget->dmxdev.filternum = 256;
-	budget->dmxdev.demux = &dvbdemux->dmx;
-	budget->dmxdev.capabilities = 0;
-
-	dvb_dmxdev_init(&budget->dmxdev, &budget->dvb_adapter);
-
-	budget->hw_frontend.source = DMX_FRONTEND_0;
-
-	ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &budget->hw_frontend);
-
-	if (ret < 0)
-		return ret;
-
-	budget->mem_frontend.source = DMX_MEMORY_FE;
-	ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &budget->mem_frontend);
-	if (ret < 0)
-		return ret;
-
-	ret = dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, &budget->hw_frontend);
-	if (ret < 0)
-		return ret;
-
-	dvb_net_init(&budget->dvb_adapter, &budget->dvb_net, &dvbdemux->dmx);
-
-	return 0;
-}
-
-static void budget_unregister(struct budget *budget)
-{
-	struct dvb_demux *dvbdemux = &budget->demux;
-
-	dprintk(2, "budget: %p\n", budget);
-
-	dvb_net_release(&budget->dvb_net);
-
-	dvbdemux->dmx.close(&dvbdemux->dmx);
-	dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &budget->hw_frontend);
-	dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &budget->mem_frontend);
-
-	dvb_dmxdev_release(&budget->dmxdev);
-	dvb_dmx_release(&budget->demux);
-}
-
-int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev,
-		      struct saa7146_pci_extension_data *info,
-		      struct module *owner, short *adapter_nums)
-{
-	int ret = 0;
-	struct budget_info *bi = info->ext_priv;
-	int max_bufsize;
-	int height_mask;
-
-	memset(budget, 0, sizeof(struct budget));
-
-	dprintk(2, "dev: %p, budget: %p\n", dev, budget);
-
-	budget->card = bi;
-	budget->dev = (struct saa7146_dev *) dev;
-
-	switch(budget->card->type) {
-	case BUDGET_FS_ACTIVY:
-		budget->buffer_width = TS_WIDTH_ACTIVY;
-		max_bufsize = TS_MAX_BUFSIZE_K_ACTIVY;
-		height_mask = TS_HEIGHT_MASK_ACTIVY;
-		break;
-
-	case BUDGET_KNC1C:
-	case BUDGET_KNC1CP:
-	case BUDGET_CIN1200C:
-	case BUDGET_KNC1C_MK3:
-	case BUDGET_KNC1C_TDA10024:
-	case BUDGET_KNC1CP_MK3:
-	case BUDGET_CIN1200C_MK3:
-		budget->buffer_width = TS_WIDTH_DVBC;
-		max_bufsize = TS_MAX_BUFSIZE_K_DVBC;
-		height_mask = TS_HEIGHT_MASK_DVBC;
-		break;
-
-	default:
-		budget->buffer_width = TS_WIDTH;
-		max_bufsize = TS_MAX_BUFSIZE_K;
-		height_mask = TS_HEIGHT_MASK;
-	}
-
-	if (dma_buffer_size < TS_MIN_BUFSIZE_K)
-		dma_buffer_size = TS_MIN_BUFSIZE_K;
-	else if (dma_buffer_size > max_bufsize)
-		dma_buffer_size = max_bufsize;
-
-	budget->buffer_height = dma_buffer_size * 1024 / budget->buffer_width;
-	if (budget->buffer_height > 0xfff) {
-		budget->buffer_height /= 2;
-		budget->buffer_height &= height_mask;
-		budget->buffer_size = 2 * budget->buffer_height * budget->buffer_width;
-	} else {
-		budget->buffer_height &= height_mask;
-		budget->buffer_size = budget->buffer_height * budget->buffer_width;
-	}
-	budget->buffer_warning_threshold = budget->buffer_size * 80/100;
-	budget->buffer_warnings = 0;
-	budget->buffer_warning_time = jiffies;
-
-	dprintk(2, "%s: buffer type = %s, width = %d, height = %d\n",
-		budget->dev->name,
-		budget->buffer_size > budget->buffer_width * budget->buffer_height ? "odd/even" : "single",
-		budget->buffer_width, budget->buffer_height);
-	printk("%s: dma buffer size %u\n", budget->dev->name, budget->buffer_size);
-
-	ret = dvb_register_adapter(&budget->dvb_adapter, budget->card->name,
-				   owner, &budget->dev->pci->dev, adapter_nums);
-	if (ret < 0)
-		return ret;
-
-	/* set dd1 stream a & b */
-	saa7146_write(dev, DD1_STREAM_B, 0x00000000);
-	saa7146_write(dev, MC2, (MASK_09 | MASK_25));
-	saa7146_write(dev, MC2, (MASK_10 | MASK_26));
-	saa7146_write(dev, DD1_INIT, 0x02000000);
-	saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
-
-	if (bi->type != BUDGET_FS_ACTIVY)
-		budget->video_port = BUDGET_VIDEO_PORTB;
-	else
-		budget->video_port = BUDGET_VIDEO_PORTA;
-	spin_lock_init(&budget->feedlock);
-	spin_lock_init(&budget->debilock);
-
-	/* the Siemens DVB needs this if you want to have the i2c chips
-	   get recognized before the main driver is loaded */
-	if (bi->type != BUDGET_FS_ACTIVY)
-		saa7146_write(dev, GPIO_CTRL, 0x500000);	/* GPIO 3 = 1 */
-
-	strlcpy(budget->i2c_adap.name, budget->card->name, sizeof(budget->i2c_adap.name));
-
-	saa7146_i2c_adapter_prepare(dev, &budget->i2c_adap, SAA7146_I2C_BUS_BIT_RATE_120);
-	strcpy(budget->i2c_adap.name, budget->card->name);
-
-	if (i2c_add_adapter(&budget->i2c_adap) < 0) {
-		ret = -ENOMEM;
-		goto err_dvb_unregister;
-	}
-
-	ttpci_eeprom_parse_mac(&budget->i2c_adap, budget->dvb_adapter.proposed_mac);
-
-	budget->grabbing = saa7146_vmalloc_build_pgtable(dev->pci, budget->buffer_size, &budget->pt);
-	if (NULL == budget->grabbing) {
-		ret = -ENOMEM;
-		goto err_del_i2c;
-	}
-
-	saa7146_write(dev, PCI_BT_V1, 0x001c0000);
-	/* upload all */
-	saa7146_write(dev, GPIO_CTRL, 0x000000);
-
-	tasklet_init(&budget->vpe_tasklet, vpeirq, (unsigned long) budget);
-
-	/* frontend power on */
-	if (bi->type != BUDGET_FS_ACTIVY)
-		saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
-
-	if ((ret = budget_register(budget)) == 0)
-		return 0; /* Everything OK */
-
-	/* An error occurred, cleanup resources */
-	saa7146_vfree_destroy_pgtable(dev->pci, budget->grabbing, &budget->pt);
-
-err_del_i2c:
-	i2c_del_adapter(&budget->i2c_adap);
-
-err_dvb_unregister:
-	dvb_unregister_adapter(&budget->dvb_adapter);
-
-	return ret;
-}
-
-void ttpci_budget_init_hooks(struct budget *budget)
-{
-	if (budget->dvb_frontend && !budget->read_fe_status) {
-		budget->read_fe_status = budget->dvb_frontend->ops.read_status;
-		budget->dvb_frontend->ops.read_status = budget_read_fe_status;
-	}
-}
-
-int ttpci_budget_deinit(struct budget *budget)
-{
-	struct saa7146_dev *dev = budget->dev;
-
-	dprintk(2, "budget: %p\n", budget);
-
-	budget_unregister(budget);
-
-	tasklet_kill(&budget->vpe_tasklet);
-
-	saa7146_vfree_destroy_pgtable(dev->pci, budget->grabbing, &budget->pt);
-
-	i2c_del_adapter(&budget->i2c_adap);
-
-	dvb_unregister_adapter(&budget->dvb_adapter);
-
-	return 0;
-}
-
-void ttpci_budget_irq10_handler(struct saa7146_dev *dev, u32 * isr)
-{
-	struct budget *budget = (struct budget *) dev->ext_priv;
-
-	dprintk(8, "dev: %p, budget: %p\n", dev, budget);
-
-	if (*isr & MASK_10)
-		tasklet_schedule(&budget->vpe_tasklet);
-}
-
-void ttpci_budget_set_video_port(struct saa7146_dev *dev, int video_port)
-{
-	struct budget *budget = (struct budget *) dev->ext_priv;
-
-	spin_lock(&budget->feedlock);
-	budget->video_port = video_port;
-	if (budget->feeding) {
-		stop_ts_capture(budget);
-		start_ts_capture(budget);
-	}
-	spin_unlock(&budget->feedlock);
-}
-
-EXPORT_SYMBOL_GPL(ttpci_budget_debiread);
-EXPORT_SYMBOL_GPL(ttpci_budget_debiwrite);
-EXPORT_SYMBOL_GPL(ttpci_budget_init);
-EXPORT_SYMBOL_GPL(ttpci_budget_init_hooks);
-EXPORT_SYMBOL_GPL(ttpci_budget_deinit);
-EXPORT_SYMBOL_GPL(ttpci_budget_irq10_handler);
-EXPORT_SYMBOL_GPL(ttpci_budget_set_video_port);
-EXPORT_SYMBOL_GPL(budget_debug);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
deleted file mode 100644
index 2cb35c2..0000000
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ /dev/null
@@ -1,680 +0,0 @@
-/*
- * budget-patch.c: driver for Budget Patch,
- * hardware modification of DVB-S cards enabling full TS
- *
- * Written by Emard <emard@softhome.net>
- *
- * Original idea by Roberto Deza <rdeza@unav.es>
- *
- * Special thanks to Holger Waechtler, Michael Hunold, Marian Durkovic
- * and Metzlerbros
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org/ 
- */
-
-#include "av7110.h"
-#include "av7110_hw.h"
-#include "budget.h"
-#include "stv0299.h"
-#include "ves1x93.h"
-#include "tda8083.h"
-
-#include "bsru6.h"
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-#define budget_patch budget
-
-static struct saa7146_extension budget_extension;
-
-MAKE_BUDGET_INFO(ttbp, "TT-Budget/Patch DVB-S 1.x PCI", BUDGET_PATCH);
-//MAKE_BUDGET_INFO(satel,"TT-Budget/Patch SATELCO PCI", BUDGET_TT_HW_DISEQC);
-
-static struct pci_device_id pci_tbl[] = {
-	MAKE_EXTENSION_PCI(ttbp,0x13c2, 0x0000),
-//        MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
-	{
-		.vendor    = 0,
-	}
-};
-
-/* those lines are for budget-patch to be tried
-** on a true budget card and observe the
-** behaviour of VSYNC generated by rps1.
-** this code was shamelessly copy/pasted from budget.c
-*/
-static void gpio_Set22K (struct budget *budget, int state)
-{
-	struct saa7146_dev *dev=budget->dev;
-	dprintk(2, "budget: %p\n", budget);
-	saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO));
-}
-
-/* Diseqc functions only for TT Budget card */
-/* taken from the Skyvision DVB driver by
-   Ralph Metzler <rjkm@metzlerbros.de> */
-
-static void DiseqcSendBit (struct budget *budget, int data)
-{
-	struct saa7146_dev *dev=budget->dev;
-	dprintk(2, "budget: %p\n", budget);
-
-	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
-	udelay(data ? 500 : 1000);
-	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
-	udelay(data ? 1000 : 500);
-}
-
-static void DiseqcSendByte (struct budget *budget, int data)
-{
-	int i, par=1, d;
-
-	dprintk(2, "budget: %p\n", budget);
-
-	for (i=7; i>=0; i--) {
-		d = (data>>i)&1;
-		par ^= d;
-		DiseqcSendBit(budget, d);
-	}
-
-	DiseqcSendBit(budget, par);
-}
-
-static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long burst)
-{
-	struct saa7146_dev *dev=budget->dev;
-	int i;
-
-	dprintk(2, "budget: %p\n", budget);
-
-	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
-	mdelay(16);
-
-	for (i=0; i<len; i++)
-		DiseqcSendByte(budget, msg[i]);
-
-	mdelay(16);
-
-	if (burst!=-1) {
-		if (burst)
-			DiseqcSendByte(budget, 0xff);
-		else {
-			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
-			mdelay(12);
-			udelay(500);
-			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
-		}
-		msleep(20);
-	}
-
-	return 0;
-}
-
-/* shamelessly copy/pasted from budget.c
-*/
-static int budget_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
-{
-	struct budget* budget = (struct budget*) fe->dvb->priv;
-
-	switch (tone) {
-	case SEC_TONE_ON:
-		gpio_Set22K (budget, 1);
-		break;
-
-	case SEC_TONE_OFF:
-		gpio_Set22K (budget, 0);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
-{
-	struct budget* budget = (struct budget*) fe->dvb->priv;
-
-	SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0);
-
-	return 0;
-}
-
-static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
-{
-	struct budget* budget = (struct budget*) fe->dvb->priv;
-
-	SendDiSEqCMsg (budget, 0, NULL, minicmd);
-
-	return 0;
-}
-
-static int budget_av7110_send_fw_cmd(struct budget_patch *budget, u16* buf, int length)
-{
-	int i;
-
-	dprintk(2, "budget: %p\n", budget);
-
-	for (i = 2; i < length; i++)
-	{
-		  ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2*i, 2, (u32) buf[i], 0,0);
-		  msleep(5);
-	}
-	if (length)
-		  ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, (u32) buf[1], 0,0);
-	else
-		  ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, 0, 0,0);
-	msleep(5);
-	ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND, 2, (u32) buf[0], 0,0);
-	msleep(5);
-	return 0;
-}
-
-static void av7110_set22k(struct budget_patch *budget, int state)
-{
-	u16 buf[2] = {( COMTYPE_AUDIODAC << 8) | (state ? ON22K : OFF22K), 0};
-
-	dprintk(2, "budget: %p\n", budget);
-	budget_av7110_send_fw_cmd(budget, buf, 2);
-}
-
-static int av7110_send_diseqc_msg(struct budget_patch *budget, int len, u8 *msg, int burst)
-{
-	int i;
-	u16 buf[18] = { ((COMTYPE_AUDIODAC << 8) | SendDiSEqC),
-		16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
-
-	dprintk(2, "budget: %p\n", budget);
-
-	if (len>10)
-		len=10;
-
-	buf[1] = len+2;
-	buf[2] = len;
-
-	if (burst != -1)
-		buf[3]=burst ? 0x01 : 0x00;
-	else
-		buf[3]=0xffff;
-
-	for (i=0; i<len; i++)
-		buf[i+4]=msg[i];
-
-	budget_av7110_send_fw_cmd(budget, buf, 18);
-	return 0;
-}
-
-static int budget_patch_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
-{
-	struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
-
-	switch (tone) {
-	case SEC_TONE_ON:
-		av7110_set22k (budget, 1);
-		break;
-
-	case SEC_TONE_OFF:
-		av7110_set22k (budget, 0);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int budget_patch_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
-{
-	struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
-
-	av7110_send_diseqc_msg (budget, cmd->msg_len, cmd->msg, 0);
-
-	return 0;
-}
-
-static int budget_patch_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
-{
-	struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
-
-	av7110_send_diseqc_msg (budget, 0, NULL, minicmd);
-
-	return 0;
-}
-
-static int alps_bsrv2_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
-	u8 pwr = 0;
-	u8 buf[4];
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
-	u32 div = (p->frequency + 479500) / 125;
-
-	if (p->frequency > 2000000)
-		pwr = 3;
-	else if (p->frequency > 1800000)
-		pwr = 2;
-	else if (p->frequency > 1600000)
-		pwr = 1;
-	else if (p->frequency > 1200000)
-		pwr = 0;
-	else if (p->frequency >= 1100000)
-		pwr = 1;
-	else pwr = 2;
-
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = div & 0xff;
-	buf[2] = ((div & 0x18000) >> 10) | 0x95;
-	buf[3] = (pwr << 6) | 0x30;
-
-	// NOTE: since we're using a prescaler of 2, we set the
-	// divisor frequency to 62.5kHz and divide by 125 above
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1)
-		return -EIO;
-	return 0;
-}
-
-static struct ves1x93_config alps_bsrv2_config = {
-	.demod_address = 0x08,
-	.xin = 90100000UL,
-	.invert_pwm = 0,
-};
-
-static int grundig_29504_451_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
-	u32 div;
-	u8 data[4];
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
-
-	div = p->frequency / 125;
-	data[0] = (div >> 8) & 0x7f;
-	data[1] = div & 0xff;
-	data[2] = 0x8e;
-	data[3] = 0x00;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1)
-		return -EIO;
-	return 0;
-}
-
-static struct tda8083_config grundig_29504_451_config = {
-	.demod_address = 0x68,
-};
-
-static void frontend_init(struct budget_patch* budget)
-{
-	switch(budget->dev->pci->subsystem_device) {
-	case 0x0000: // Hauppauge/TT WinTV DVB-S rev1.X
-	case 0x1013: // SATELCO Multimedia PCI
-
-		// try the ALPS BSRV2 first of all
-		budget->dvb_frontend = dvb_attach(ves1x93_attach, &alps_bsrv2_config, &budget->i2c_adap);
-		if (budget->dvb_frontend) {
-			budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsrv2_tuner_set_params;
-			budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_patch_diseqc_send_master_cmd;
-			budget->dvb_frontend->ops.diseqc_send_burst = budget_patch_diseqc_send_burst;
-			budget->dvb_frontend->ops.set_tone = budget_patch_set_tone;
-			break;
-		}
-
-		// try the ALPS BSRU6 now
-		budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap);
-		if (budget->dvb_frontend) {
-			budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
-			budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
-
-			budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
-			budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst;
-			budget->dvb_frontend->ops.set_tone = budget_set_tone;
-			break;
-		}
-
-		// Try the grundig 29504-451
-		budget->dvb_frontend = dvb_attach(tda8083_attach, &grundig_29504_451_config, &budget->i2c_adap);
-		if (budget->dvb_frontend) {
-			budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_451_tuner_set_params;
-			budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
-			budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst;
-			budget->dvb_frontend->ops.set_tone = budget_set_tone;
-			break;
-		}
-		break;
-	}
-
-	if (budget->dvb_frontend == NULL) {
-		printk("dvb-ttpci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
-		       budget->dev->pci->vendor,
-		       budget->dev->pci->device,
-		       budget->dev->pci->subsystem_vendor,
-		       budget->dev->pci->subsystem_device);
-	} else {
-		if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) {
-			printk("budget-av: Frontend registration failed!\n");
-			dvb_frontend_detach(budget->dvb_frontend);
-			budget->dvb_frontend = NULL;
-		}
-	}
-}
-
-/* written by Emard */
-static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
-{
-	struct budget_patch *budget;
-	int err;
-	int count = 0;
-	int detected = 0;
-
-#define PATCH_RESET 0
-#define RPS_IRQ 0
-#define HPS_SETUP 0
-#if PATCH_RESET
-	saa7146_write(dev, MC1, MASK_31);
-	msleep(40);
-#endif
-#if HPS_SETUP
-	// initialize registers. Better to have it like this
-	// than leaving something unconfigured
-	saa7146_write(dev, DD1_STREAM_B, 0);
-	// port B VSYNC at rising edge
-	saa7146_write(dev, DD1_INIT, 0x00000200);  // have this in budget-core too!
-	saa7146_write(dev, BRS_CTRL, 0x00000000);  // VBI
-
-	// debi config
-	// saa7146_write(dev, DEBI_CONFIG, MASK_30|MASK_28|MASK_18);
-
-	// zero all HPS registers
-	saa7146_write(dev, HPS_H_PRESCALE, 0);                  // r68
-	saa7146_write(dev, HPS_H_SCALE, 0);                     // r6c
-	saa7146_write(dev, BCS_CTRL, 0);                        // r70
-	saa7146_write(dev, HPS_V_SCALE, 0);                     // r60
-	saa7146_write(dev, HPS_V_GAIN, 0);                      // r64
-	saa7146_write(dev, CHROMA_KEY_RANGE, 0);                // r74
-	saa7146_write(dev, CLIP_FORMAT_CTRL, 0);                // r78
-	// Set HPS prescaler for port B input
-	saa7146_write(dev, HPS_CTRL, (1<<30) | (0<<29) | (1<<28) | (0<<12) );
-	saa7146_write(dev, MC2,
-	  0 * (MASK_08 | MASK_24)  |   // BRS control
-	  0 * (MASK_09 | MASK_25)  |   // a
-	  0 * (MASK_10 | MASK_26)  |   // b
-	  1 * (MASK_06 | MASK_22)  |   // HPS_CTRL1
-	  1 * (MASK_05 | MASK_21)  |   // HPS_CTRL2
-	  0 * (MASK_01 | MASK_15)      // DEBI
-	   );
-#endif
-	// Disable RPS1 and RPS0
-	saa7146_write(dev, MC1, ( MASK_29 | MASK_28));
-	// RPS1 timeout disable
-	saa7146_write(dev, RPS_TOV1, 0);
-
-	// code for autodetection
-	// will wait for VBI_B event (vertical blank at port B)
-	// and will reset GPIO3 after VBI_B is detected.
-	// (GPIO3 should be raised high by CPU to
-	// test if GPIO3 will generate vertical blank signal
-	// in budget patch GPIO3 is connected to VSYNC_B
-	count = 0;
-#if 0
-	WRITE_RPS1(CMD_UPLOAD |
-	  MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 );
-#endif
-	WRITE_RPS1(CMD_PAUSE | EVT_VBI_B);
-	WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
-	WRITE_RPS1(GPIO3_MSK);
-	WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
-#if RPS_IRQ
-	// issue RPS1 interrupt to increment counter
-	WRITE_RPS1(CMD_INTERRUPT);
-	// at least a NOP is neede between two interrupts
-	WRITE_RPS1(CMD_NOP);
-	// interrupt again
-	WRITE_RPS1(CMD_INTERRUPT);
-#endif
-	WRITE_RPS1(CMD_STOP);
-
-#if RPS_IRQ
-	// set event counter 1 source as RPS1 interrupt (0x03)          (rE4 p53)
-	// use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled
-	// use 0x15 to track VPE  interrupts - increase by 1 every vpeirq() is called
-	saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
-	// set event counter 1 threshold to maximum allowed value        (rEC p55)
-	saa7146_write(dev, ECT1R,  0x3fff );
-#endif
-	// Fix VSYNC level
-	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
-	// Set RPS1 Address register to point to RPS code               (r108 p42)
-	saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
-	// Enable RPS1,                                                 (rFC p33)
-	saa7146_write(dev, MC1, (MASK_13 | MASK_29 ));
-
-
-	mdelay(50);
-	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
-	mdelay(150);
-
-
-	if( (saa7146_read(dev, GPIO_CTRL) & 0x10000000) == 0)
-		detected = 1;
-
-#if RPS_IRQ
-	printk("Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff );
-#endif
-	// Disable RPS1
-	saa7146_write(dev, MC1, ( MASK_29 ));
-
-	if(detected == 0)
-		printk("budget-patch not detected or saa7146 in non-default state.\n"
-		       "try enabling ressetting of 7146 with MASK_31 in MC1 register\n");
-
-	else
-		printk("BUDGET-PATCH DETECTED.\n");
-
-
-/*      OLD (Original design by Roberto Deza):
-**      This code will setup the SAA7146_RPS1 to generate a square
-**      wave on GPIO3, changing when a field (TS_HEIGHT/2 "lines" of
-**      TS_WIDTH packets) has been acquired on SAA7146_D1B video port;
-**      then, this GPIO3 output which is connected to the D1B_VSYNC
-**      input, will trigger the acquisition of the alternate field
-**      and so on.
-**      Currently, the TT_budget / WinTV_Nova cards have two ICs
-**      (74HCT4040, LVC74) for the generation of this VSYNC signal,
-**      which seems that can be done perfectly without this :-)).
-*/
-
-/*      New design (By Emard)
-**      this rps1 code will copy internal HS event to GPIO3 pin.
-**      GPIO3 is in budget-patch hardware connected to port B VSYNC
-
-**      HS is an internal event of 7146, accessible with RPS
-**      and temporarily raised high every n lines
-**      (n in defined in the RPS_THRESH1 counter threshold)
-**      I think HS is raised high on the beginning of the n-th line
-**      and remains high until this n-th line that triggered
-**      it is completely received. When the reception of n-th line
-**      ends, HS is lowered.
-
-**      To transmit data over DMA, 7146 needs changing state at
-**      port B VSYNC pin. Any changing of port B VSYNC will
-**      cause some DMA data transfer, with more or less packets loss.
-**      It depends on the phase and frequency of VSYNC and
-**      the way of 7146 is instructed to trigger on port B (defined
-**      in DD1_INIT register, 3rd nibble from the right valid
-**      numbers are 0-7, see datasheet)
-**
-**      The correct triggering can minimize packet loss,
-**      dvbtraffic should give this stable bandwidths:
-**        22k transponder = 33814 kbit/s
-**      27.5k transponder = 38045 kbit/s
-**      by experiment it is found that the best results
-**      (stable bandwidths and almost no packet loss)
-**      are obtained using DD1_INIT triggering number 2
-**      (Va at rising edge of VS Fa = HS x VS-failing forced toggle)
-**      and a VSYNC phase that occurs in the middle of DMA transfer
-**      (about byte 188*512=96256 in the DMA window).
-**
-**      Phase of HS is still not clear to me how to control,
-**      It just happens to be so. It can be seen if one enables
-**      RPS_IRQ and print Event Counter 1 in vpeirq(). Every
-**      time RPS_INTERRUPT is called, the Event Counter 1 will
-**      increment. That's how the 7146 is programmed to do event
-**      counting in this budget-patch.c
-**      I *think* HPS setting has something to do with the phase
-**      of HS but I can't be 100% sure in that.
-
-**      hardware debug note: a working budget card (including budget patch)
-**      with vpeirq() interrupt setup in mode "0x90" (every 64K) will
-**      generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes
-**      and that means 3*25=75 Hz of interrupt frequency, as seen by
-**      watch cat /proc/interrupts
-**
-**      If this frequency is 3x lower (and data received in the DMA
-**      buffer don't start with 0x47, but in the middle of packets,
-**      whose lengths appear to be like 188 292 188 104 etc.
-**      this means VSYNC line is not connected in the hardware.
-**      (check soldering pcb and pins)
-**      The same behaviour of missing VSYNC can be duplicated on budget
-**      cards, by setting DD1_INIT trigger mode 7 in 3rd nibble.
-*/
-
-	// Setup RPS1 "program" (p35)
-	count = 0;
-
-
-	// Wait Source Line Counter Threshold                           (p36)
-	WRITE_RPS1(CMD_PAUSE | EVT_HS);
-	// Set GPIO3=1                                                  (p42)
-	WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
-	WRITE_RPS1(GPIO3_MSK);
-	WRITE_RPS1(SAA7146_GPIO_OUTHI<<24);
-#if RPS_IRQ
-	// issue RPS1 interrupt
-	WRITE_RPS1(CMD_INTERRUPT);
-#endif
-	// Wait reset Source Line Counter Threshold                     (p36)
-	WRITE_RPS1(CMD_PAUSE | RPS_INV | EVT_HS);
-	// Set GPIO3=0                                                  (p42)
-	WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
-	WRITE_RPS1(GPIO3_MSK);
-	WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
-#if RPS_IRQ
-	// issue RPS1 interrupt
-	WRITE_RPS1(CMD_INTERRUPT);
-#endif
-	// Jump to begin of RPS program                                 (p37)
-	WRITE_RPS1(CMD_JUMP);
-	WRITE_RPS1(dev->d_rps1.dma_handle);
-
-	// Fix VSYNC level
-	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
-	// Set RPS1 Address register to point to RPS code               (r108 p42)
-	saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
-
-	if (!(budget = kmalloc (sizeof(struct budget_patch), GFP_KERNEL)))
-		return -ENOMEM;
-
-	dprintk(2, "budget: %p\n", budget);
-
-	err = ttpci_budget_init(budget, dev, info, THIS_MODULE, adapter_nr);
-	if (err) {
-		kfree(budget);
-		return err;
-	}
-
-	// Set Source Line Counter Threshold, using BRS                 (rCC p43)
-	// It generates HS event every TS_HEIGHT lines
-	// this is related to TS_WIDTH set in register
-	// NUM_LINE_BYTE3 in budget-core.c. If NUM_LINE_BYTE
-	// low 16 bits are set to TS_WIDTH bytes (TS_WIDTH=2*188
-	//,then RPS_THRESH1
-	// should be set to trigger every TS_HEIGHT (512) lines.
-	//
-	saa7146_write(dev, RPS_THRESH1, budget->buffer_height | MASK_12 );
-
-	// saa7146_write(dev, RPS_THRESH0, ((TS_HEIGHT/2)<<16) |MASK_28| (TS_HEIGHT/2) |MASK_12 );
-	// Enable RPS1                                                  (rFC p33)
-	saa7146_write(dev, MC1, (MASK_13 | MASK_29));
-
-
-	dev->ext_priv = budget;
-
-	budget->dvb_adapter.priv = budget;
-	frontend_init(budget);
-
-	ttpci_budget_init_hooks(budget);
-
-	return 0;
-}
-
-static int budget_patch_detach (struct saa7146_dev* dev)
-{
-	struct budget_patch *budget = (struct budget_patch*) dev->ext_priv;
-	int err;
-
-	if (budget->dvb_frontend) {
-		dvb_unregister_frontend(budget->dvb_frontend);
-		dvb_frontend_detach(budget->dvb_frontend);
-	}
-	err = ttpci_budget_deinit (budget);
-
-	kfree (budget);
-
-	return err;
-}
-
-static int __init budget_patch_init(void)
-{
-	return saa7146_register_extension(&budget_extension);
-}
-
-static void __exit budget_patch_exit(void)
-{
-	saa7146_unregister_extension(&budget_extension);
-}
-
-static struct saa7146_extension budget_extension = {
-	.name           = "budget_patch dvb",
-	.flags          = 0,
-
-	.module         = THIS_MODULE,
-	.pci_tbl        = pci_tbl,
-	.attach         = budget_patch_attach,
-	.detach         = budget_patch_detach,
-
-	.irq_mask       = MASK_10,
-	.irq_func       = ttpci_budget_irq10_handler,
-};
-
-module_init(budget_patch_init);
-module_exit(budget_patch_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Emard, Roberto Deza, Holger Waechtler, Michael Hunold, others");
-MODULE_DESCRIPTION("Driver for full TS modified DVB-S SAA7146+AV7110 "
-		   "based so-called Budget Patch cards");
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
deleted file mode 100644
index b21bcce..0000000
--- a/drivers/media/dvb/ttpci/budget.c
+++ /dev/null
@@ -1,811 +0,0 @@
-/*
- * budget.c: driver for the SAA7146 based Budget DVB cards
- *
- * Compiled from various sources by Michael Hunold <michael@mihu.de>
- *
- * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
- *
- * Copyright (C) 1999-2002 Ralph  Metzler
- *                       & Marcus Metzler for convergence integrated media GmbH
- *
- * 26feb2004 Support for FS Activy Card (Grundig tuner) by
- *           Michael Dreher <michael@5dot1.de>,
- *           Oliver Endriss <o.endriss@gmx.de> and
- *           Andreas 'randy' Weinberger
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org/ 
- */
-
-#include "budget.h"
-#include "stv0299.h"
-#include "ves1x93.h"
-#include "ves1820.h"
-#include "l64781.h"
-#include "tda8083.h"
-#include "s5h1420.h"
-#include "tda10086.h"
-#include "tda826x.h"
-#include "lnbp21.h"
-#include "bsru6.h"
-#include "bsbe1.h"
-#include "tdhd1.h"
-#include "stv6110x.h"
-#include "stv090x.h"
-#include "isl6423.h"
-
-static int diseqc_method;
-module_param(diseqc_method, int, 0444);
-MODULE_PARM_DESC(diseqc_method, "Select DiSEqC method for subsystem id 13c2:1003, 0: default, 1: more reliable (for newer revisions only)");
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static void Set22K (struct budget *budget, int state)
-{
-	struct saa7146_dev *dev=budget->dev;
-	dprintk(2, "budget: %p\n", budget);
-	saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO));
-}
-
-/* Diseqc functions only for TT Budget card */
-/* taken from the Skyvision DVB driver by
-   Ralph Metzler <rjkm@metzlerbros.de> */
-
-static void DiseqcSendBit (struct budget *budget, int data)
-{
-	struct saa7146_dev *dev=budget->dev;
-	dprintk(2, "budget: %p\n", budget);
-
-	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
-	udelay(data ? 500 : 1000);
-	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
-	udelay(data ? 1000 : 500);
-}
-
-static void DiseqcSendByte (struct budget *budget, int data)
-{
-	int i, par=1, d;
-
-	dprintk(2, "budget: %p\n", budget);
-
-	for (i=7; i>=0; i--) {
-		d = (data>>i)&1;
-		par ^= d;
-		DiseqcSendBit(budget, d);
-	}
-
-	DiseqcSendBit(budget, par);
-}
-
-static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long burst)
-{
-	struct saa7146_dev *dev=budget->dev;
-	int i;
-
-	dprintk(2, "budget: %p\n", budget);
-
-	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
-	mdelay(16);
-
-	for (i=0; i<len; i++)
-		DiseqcSendByte(budget, msg[i]);
-
-	mdelay(16);
-
-	if (burst!=-1) {
-		if (burst)
-			DiseqcSendByte(budget, 0xff);
-		else {
-			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
-			mdelay(12);
-			udelay(500);
-			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
-		}
-		msleep(20);
-	}
-
-	return 0;
-}
-
-/*
- *   Routines for the Fujitsu Siemens Activy budget card
- *   22 kHz tone and DiSEqC are handled by the frontend.
- *   Voltage must be set here.
- *   GPIO 1: LNBP EN, GPIO 2: LNBP VSEL
- */
-static int SetVoltage_Activy (struct budget *budget, fe_sec_voltage_t voltage)
-{
-	struct saa7146_dev *dev=budget->dev;
-
-	dprintk(2, "budget: %p\n", budget);
-
-	switch (voltage) {
-		case SEC_VOLTAGE_13:
-			saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI);
-			saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO);
-			break;
-		case SEC_VOLTAGE_18:
-			saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI);
-			saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
-			break;
-		case SEC_VOLTAGE_OFF:
-			saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO);
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int siemens_budget_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
-{
-	struct budget* budget = (struct budget*) fe->dvb->priv;
-
-	return SetVoltage_Activy (budget, voltage);
-}
-
-static int budget_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
-{
-	struct budget* budget = (struct budget*) fe->dvb->priv;
-
-	switch (tone) {
-	case SEC_TONE_ON:
-		Set22K (budget, 1);
-		break;
-
-	case SEC_TONE_OFF:
-		Set22K (budget, 0);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
-{
-	struct budget* budget = (struct budget*) fe->dvb->priv;
-
-	SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0);
-
-	return 0;
-}
-
-static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
-{
-	struct budget* budget = (struct budget*) fe->dvb->priv;
-
-	SendDiSEqCMsg (budget, 0, NULL, minicmd);
-
-	return 0;
-}
-
-static int alps_bsrv2_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct budget* budget = (struct budget*) fe->dvb->priv;
-	u8 pwr = 0;
-	u8 buf[4];
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
-	u32 div = (c->frequency + 479500) / 125;
-
-	if (c->frequency > 2000000)
-		pwr = 3;
-	else if (c->frequency > 1800000)
-		pwr = 2;
-	else if (c->frequency > 1600000)
-		pwr = 1;
-	else if (c->frequency > 1200000)
-		pwr = 0;
-	else if (c->frequency >= 1100000)
-		pwr = 1;
-	else pwr = 2;
-
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = div & 0xff;
-	buf[2] = ((div & 0x18000) >> 10) | 0x95;
-	buf[3] = (pwr << 6) | 0x30;
-
-	// NOTE: since we're using a prescaler of 2, we set the
-	// divisor frequency to 62.5kHz and divide by 125 above
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-	return 0;
-}
-
-static struct ves1x93_config alps_bsrv2_config =
-{
-	.demod_address = 0x08,
-	.xin = 90100000UL,
-	.invert_pwm = 0,
-};
-
-static int alps_tdbe2_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct budget* budget = (struct budget*) fe->dvb->priv;
-	u32 div;
-	u8 data[4];
-	struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) };
-
-	div = (c->frequency + 35937500 + 31250) / 62500;
-
-	data[0] = (div >> 8) & 0x7f;
-	data[1] = div & 0xff;
-	data[2] = 0x85 | ((div >> 10) & 0x60);
-	data[3] = (c->frequency < 174000000 ? 0x88 : c->frequency < 470000000 ? 0x84 : 0x81);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-	return 0;
-}
-
-static struct ves1820_config alps_tdbe2_config = {
-	.demod_address = 0x09,
-	.xin = 57840000UL,
-	.invert = 1,
-	.selagc = VES1820_SELAGC_SIGNAMPERR,
-};
-
-static int grundig_29504_401_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct budget *budget = fe->dvb->priv;
-	u8 *tuner_addr = fe->tuner_priv;
-	u32 div;
-	u8 cfg, cpump, band_select;
-	u8 data[4];
-	struct i2c_msg msg = { .flags = 0, .buf = data, .len = sizeof(data) };
-
-	if (tuner_addr)
-		msg.addr = *tuner_addr;
-	else
-		msg.addr = 0x61;
-
-	div = (36125000 + c->frequency) / 166666;
-
-	cfg = 0x88;
-
-	if (c->frequency < 175000000)
-		cpump = 2;
-	else if (c->frequency < 390000000)
-		cpump = 1;
-	else if (c->frequency < 470000000)
-		cpump = 2;
-	else if (c->frequency < 750000000)
-		cpump = 1;
-	else
-		cpump = 3;
-
-	if (c->frequency < 175000000)
-		band_select = 0x0e;
-	else if (c->frequency < 470000000)
-		band_select = 0x05;
-	else
-		band_select = 0x03;
-
-	data[0] = (div >> 8) & 0x7f;
-	data[1] = div & 0xff;
-	data[2] = ((div >> 10) & 0x60) | cfg;
-	data[3] = (cpump << 6) | band_select;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-	return 0;
-}
-
-static struct l64781_config grundig_29504_401_config = {
-	.demod_address = 0x55,
-};
-
-static struct l64781_config grundig_29504_401_config_activy = {
-	.demod_address = 0x54,
-};
-
-static u8 tuner_address_grundig_29504_401_activy = 0x60;
-
-static int grundig_29504_451_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct budget* budget = (struct budget*) fe->dvb->priv;
-	u32 div;
-	u8 data[4];
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
-
-	div = c->frequency / 125;
-	data[0] = (div >> 8) & 0x7f;
-	data[1] = div & 0xff;
-	data[2] = 0x8e;
-	data[3] = 0x00;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-	return 0;
-}
-
-static struct tda8083_config grundig_29504_451_config = {
-	.demod_address = 0x68,
-};
-
-static int s5h1420_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct budget* budget = (struct budget*) fe->dvb->priv;
-	u32 div;
-	u8 data[4];
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
-
-	div = c->frequency / 1000;
-	data[0] = (div >> 8) & 0x7f;
-	data[1] = div & 0xff;
-	data[2] = 0xc2;
-
-	if (div < 1450)
-		data[3] = 0x00;
-	else if (div < 1850)
-		data[3] = 0x40;
-	else if (div < 2000)
-		data[3] = 0x80;
-	else
-		data[3] = 0xc0;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-
-	return 0;
-}
-
-static struct s5h1420_config s5h1420_config = {
-	.demod_address = 0x53,
-	.invert = 1,
-	.cdclk_polarity = 1,
-};
-
-static struct tda10086_config tda10086_config = {
-	.demod_address = 0x0e,
-	.invert = 0,
-	.diseqc_tone = 1,
-	.xtal_freq = TDA10086_XTAL_16M,
-};
-
-static struct stv0299_config alps_bsru6_config_activy = {
-	.demod_address = 0x68,
-	.inittab = alps_bsru6_inittab,
-	.mclk = 88000000UL,
-	.invert = 1,
-	.op0_off = 1,
-	.min_delay_ms = 100,
-	.set_symbol_rate = alps_bsru6_set_symbol_rate,
-};
-
-static struct stv0299_config alps_bsbe1_config_activy = {
-	.demod_address = 0x68,
-	.inittab = alps_bsbe1_inittab,
-	.mclk = 88000000UL,
-	.invert = 1,
-	.op0_off = 1,
-	.min_delay_ms = 100,
-	.set_symbol_rate = alps_bsbe1_set_symbol_rate,
-};
-
-static int alps_tdhd1_204_request_firmware(struct dvb_frontend *fe, const struct firmware **fw, char *name)
-{
-	struct budget *budget = (struct budget *)fe->dvb->priv;
-
-	return request_firmware(fw, name, &budget->dev->pci->dev);
-}
-
-
-static int i2c_readreg(struct i2c_adapter *i2c, u8 adr, u8 reg)
-{
-	u8 val;
-	struct i2c_msg msg[] = {
-		{ .addr = adr, .flags = 0, .buf = &reg, .len = 1 },
-		{ .addr = adr, .flags = I2C_M_RD, .buf = &val, .len = 1 }
-	};
-
-	return (i2c_transfer(i2c, msg, 2) != 2) ? -EIO : val;
-}
-
-static u8 read_pwm(struct budget* budget)
-{
-	u8 b = 0xff;
-	u8 pwm;
-	struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
-				 { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };
-
-	if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
-		pwm = 0x48;
-
-	return pwm;
-}
-
-static struct stv090x_config tt1600_stv090x_config = {
-	.device			= STV0903,
-	.demod_mode		= STV090x_SINGLE,
-	.clk_mode		= STV090x_CLK_EXT,
-
-	.xtal			= 13500000,
-	.address		= 0x68,
-
-	.ts1_mode		= STV090x_TSMODE_DVBCI,
-	.ts2_mode		= STV090x_TSMODE_SERIAL_CONTINUOUS,
-
-	.repeater_level		= STV090x_RPTLEVEL_16,
-
-	.tuner_init		= NULL,
-	.tuner_sleep		= NULL,
-	.tuner_set_mode		= NULL,
-	.tuner_set_frequency	= NULL,
-	.tuner_get_frequency	= NULL,
-	.tuner_set_bandwidth	= NULL,
-	.tuner_get_bandwidth	= NULL,
-	.tuner_set_bbgain	= NULL,
-	.tuner_get_bbgain	= NULL,
-	.tuner_set_refclk	= NULL,
-	.tuner_get_status	= NULL,
-};
-
-static struct stv6110x_config tt1600_stv6110x_config = {
-	.addr			= 0x60,
-	.refclk			= 27000000,
-	.clk_div		= 2,
-};
-
-static struct isl6423_config tt1600_isl6423_config = {
-	.current_max		= SEC_CURRENT_515m,
-	.curlim			= SEC_CURRENT_LIM_ON,
-	.mod_extern		= 1,
-	.addr			= 0x08,
-};
-
-static void frontend_init(struct budget *budget)
-{
-	(void)alps_bsbe1_config; /* avoid warning */
-
-	switch(budget->dev->pci->subsystem_device) {
-	case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659))
-	case 0x1013:
-		// try the ALPS BSRV2 first of all
-		budget->dvb_frontend = dvb_attach(ves1x93_attach, &alps_bsrv2_config, &budget->i2c_adap);
-		if (budget->dvb_frontend) {
-			budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsrv2_tuner_set_params;
-			budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
-			budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst;
-			budget->dvb_frontend->ops.set_tone = budget_set_tone;
-			break;
-		}
-
-		// try the ALPS BSRU6 now
-		budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap);
-		if (budget->dvb_frontend) {
-			budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
-			budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
-			if (budget->dev->pci->subsystem_device == 0x1003 && diseqc_method == 0) {
-				budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
-				budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst;
-				budget->dvb_frontend->ops.set_tone = budget_set_tone;
-			}
-			break;
-		}
-		break;
-
-	case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659))
-
-		budget->dvb_frontend = dvb_attach(ves1820_attach, &alps_tdbe2_config, &budget->i2c_adap, read_pwm(budget));
-		if (budget->dvb_frontend) {
-			budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdbe2_tuner_set_params;
-			break;
-		}
-		break;
-
-	case 0x1005: // Hauppauge/TT Nova-T budget (L64781/Grundig 29504-401(tsa5060))
-
-		budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config, &budget->i2c_adap);
-		if (budget->dvb_frontend) {
-			budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params;
-			budget->dvb_frontend->tuner_priv = NULL;
-			break;
-		}
-		break;
-
-	case 0x4f60: /* Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/tsa5059) */
-	{
-		int subtype = i2c_readreg(&budget->i2c_adap, 0x50, 0x67);
-
-		if (subtype < 0)
-			break;
-		/* fixme: find a better way to identify the card */
-		if (subtype < 0x36) {
-			/* assume ALPS BSRU6 */
-			budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config_activy, &budget->i2c_adap);
-			if (budget->dvb_frontend) {
-				printk(KERN_INFO "budget: tuner ALPS BSRU6 detected\n");
-				budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
-				budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
-				budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
-				budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
-				break;
-			}
-		} else {
-			/* assume ALPS BSBE1 */
-			/* reset tuner */
-			saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTLO);
-			msleep(50);
-			saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTHI);
-			msleep(250);
-			budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config_activy, &budget->i2c_adap);
-			if (budget->dvb_frontend) {
-				printk(KERN_INFO "budget: tuner ALPS BSBE1 detected\n");
-				budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params;
-				budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
-				budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
-				budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
-				break;
-			}
-		}
-		break;
-	}
-
-	case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI rev GR (tda8083/Grundig 29504-451(tsa5522))
-		budget->dvb_frontend = dvb_attach(tda8083_attach, &grundig_29504_451_config, &budget->i2c_adap);
-		if (budget->dvb_frontend) {
-			budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_451_tuner_set_params;
-			budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
-			budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
-		}
-		break;
-
-	case 0x5f60: /* Fujitsu Siemens Activy Budget-T PCI rev AL (tda10046/ALPS TDHD1-204A) */
-		budget->dvb_frontend = dvb_attach(tda10046_attach, &alps_tdhd1_204a_config, &budget->i2c_adap);
-		if (budget->dvb_frontend) {
-			budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdhd1_204a_tuner_set_params;
-			budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
-		}
-		break;
-
-	case 0x5f61: /* Fujitsu Siemens Activy Budget-T PCI rev GR (L64781/Grundig 29504-401(tsa5060)) */
-		budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config_activy, &budget->i2c_adap);
-		if (budget->dvb_frontend) {
-			budget->dvb_frontend->tuner_priv = &tuner_address_grundig_29504_401_activy;
-			budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params;
-		}
-		break;
-
-	case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260))
-		budget->dvb_frontend = dvb_attach(s5h1420_attach, &s5h1420_config, &budget->i2c_adap);
-		if (budget->dvb_frontend) {
-			budget->dvb_frontend->ops.tuner_ops.set_params = s5h1420_tuner_set_params;
-			if (dvb_attach(lnbp21_attach, budget->dvb_frontend, &budget->i2c_adap, 0, 0) == NULL) {
-				printk("%s: No LNBP21 found!\n", __func__);
-				goto error_out;
-			}
-			break;
-		}
-
-	case 0x1018: // TT Budget-S-1401 (philips tda10086/philips tda8262)
-		// gpio2 is connected to CLB - reset it + leave it high
-		saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO);
-		msleep(1);
-		saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI);
-		msleep(1);
-
-		budget->dvb_frontend = dvb_attach(tda10086_attach, &tda10086_config, &budget->i2c_adap);
-		if (budget->dvb_frontend) {
-			if (dvb_attach(tda826x_attach, budget->dvb_frontend, 0x60, &budget->i2c_adap, 0) == NULL)
-				printk("%s: No tda826x found!\n", __func__);
-			if (dvb_attach(lnbp21_attach, budget->dvb_frontend, &budget->i2c_adap, 0, 0) == NULL) {
-				printk("%s: No LNBP21 found!\n", __func__);
-				goto error_out;
-			}
-			break;
-		}
-
-	case 0x101c: { /* TT S2-1600 */
-			struct stv6110x_devctl *ctl;
-			saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO);
-			msleep(50);
-			saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI);
-			msleep(250);
-
-			budget->dvb_frontend = dvb_attach(stv090x_attach,
-							  &tt1600_stv090x_config,
-							  &budget->i2c_adap,
-							  STV090x_DEMODULATOR_0);
-
-			if (budget->dvb_frontend) {
-
-				ctl = dvb_attach(stv6110x_attach,
-						 budget->dvb_frontend,
-						 &tt1600_stv6110x_config,
-						 &budget->i2c_adap);
-
-				if (ctl) {
-					tt1600_stv090x_config.tuner_init	  = ctl->tuner_init;
-					tt1600_stv090x_config.tuner_sleep	  = ctl->tuner_sleep;
-					tt1600_stv090x_config.tuner_set_mode	  = ctl->tuner_set_mode;
-					tt1600_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency;
-					tt1600_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency;
-					tt1600_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth;
-					tt1600_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth;
-					tt1600_stv090x_config.tuner_set_bbgain	  = ctl->tuner_set_bbgain;
-					tt1600_stv090x_config.tuner_get_bbgain	  = ctl->tuner_get_bbgain;
-					tt1600_stv090x_config.tuner_set_refclk	  = ctl->tuner_set_refclk;
-					tt1600_stv090x_config.tuner_get_status	  = ctl->tuner_get_status;
-
-					/* call the init function once to initialize
-					   tuner's clock output divider and demod's
-					   master clock */
-					if (budget->dvb_frontend->ops.init)
-						budget->dvb_frontend->ops.init(budget->dvb_frontend);
-
-					if (dvb_attach(isl6423_attach,
-						       budget->dvb_frontend,
-						       &budget->i2c_adap,
-						       &tt1600_isl6423_config) == NULL) {
-						printk(KERN_ERR "%s: No Intersil ISL6423 found!\n", __func__);
-						goto error_out;
-					}
-				} else {
-					printk(KERN_ERR "%s: No STV6110(A) Silicon Tuner found!\n", __func__);
-					goto error_out;
-				}
-			}
-		}
-		break;
-	}
-
-	if (budget->dvb_frontend == NULL) {
-		printk("budget: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
-		       budget->dev->pci->vendor,
-		       budget->dev->pci->device,
-		       budget->dev->pci->subsystem_vendor,
-		       budget->dev->pci->subsystem_device);
-	} else {
-		if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend))
-			goto error_out;
-	}
-	return;
-
-error_out:
-	printk("budget: Frontend registration failed!\n");
-	dvb_frontend_detach(budget->dvb_frontend);
-	budget->dvb_frontend = NULL;
-	return;
-}
-
-static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
-{
-	struct budget *budget = NULL;
-	int err;
-
-	budget = kmalloc(sizeof(struct budget), GFP_KERNEL);
-	if( NULL == budget ) {
-		return -ENOMEM;
-	}
-
-	dprintk(2, "dev:%p, info:%p, budget:%p\n", dev, info, budget);
-
-	dev->ext_priv = budget;
-
-	err = ttpci_budget_init(budget, dev, info, THIS_MODULE, adapter_nr);
-	if (err) {
-		printk("==> failed\n");
-		kfree (budget);
-		return err;
-	}
-
-	budget->dvb_adapter.priv = budget;
-	frontend_init(budget);
-
-	ttpci_budget_init_hooks(budget);
-
-	return 0;
-}
-
-static int budget_detach (struct saa7146_dev* dev)
-{
-	struct budget *budget = (struct budget*) dev->ext_priv;
-	int err;
-
-	if (budget->dvb_frontend) {
-		dvb_unregister_frontend(budget->dvb_frontend);
-		dvb_frontend_detach(budget->dvb_frontend);
-	}
-
-	err = ttpci_budget_deinit (budget);
-
-	kfree (budget);
-	dev->ext_priv = NULL;
-
-	return err;
-}
-
-static struct saa7146_extension budget_extension;
-
-MAKE_BUDGET_INFO(ttbs,	"TT-Budget/WinTV-NOVA-S  PCI",	BUDGET_TT);
-MAKE_BUDGET_INFO(ttbc,	"TT-Budget/WinTV-NOVA-C  PCI",	BUDGET_TT);
-MAKE_BUDGET_INFO(ttbt,	"TT-Budget/WinTV-NOVA-T  PCI",	BUDGET_TT);
-MAKE_BUDGET_INFO(satel,	"SATELCO Multimedia PCI",	BUDGET_TT_HW_DISEQC);
-MAKE_BUDGET_INFO(ttbs1401, "TT-Budget-S-1401 PCI", BUDGET_TT);
-MAKE_BUDGET_INFO(tt1600, "TT-Budget S2-1600 PCI", BUDGET_TT);
-MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY);
-MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY);
-MAKE_BUDGET_INFO(fsact,	 "Fujitsu Siemens Activy Budget-T PCI (rev GR/Grundig frontend)", BUDGET_FS_ACTIVY);
-MAKE_BUDGET_INFO(fsact1, "Fujitsu Siemens Activy Budget-T PCI (rev AL/ALPS TDHD1-204A)", BUDGET_FS_ACTIVY);
-
-static struct pci_device_id pci_tbl[] = {
-	MAKE_EXTENSION_PCI(ttbs,  0x13c2, 0x1003),
-	MAKE_EXTENSION_PCI(ttbc,  0x13c2, 0x1004),
-	MAKE_EXTENSION_PCI(ttbt,  0x13c2, 0x1005),
-	MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
-	MAKE_EXTENSION_PCI(ttbs,  0x13c2, 0x1016),
-	MAKE_EXTENSION_PCI(ttbs1401, 0x13c2, 0x1018),
-	MAKE_EXTENSION_PCI(tt1600, 0x13c2, 0x101c),
-	MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60),
-	MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61),
-	MAKE_EXTENSION_PCI(fsact1, 0x1131, 0x5f60),
-	MAKE_EXTENSION_PCI(fsact, 0x1131, 0x5f61),
-	{
-		.vendor    = 0,
-	}
-};
-
-MODULE_DEVICE_TABLE(pci, pci_tbl);
-
-static struct saa7146_extension budget_extension = {
-	.name		= "budget dvb",
-	.flags		= SAA7146_USE_I2C_IRQ,
-
-	.module		= THIS_MODULE,
-	.pci_tbl	= pci_tbl,
-	.attach		= budget_attach,
-	.detach		= budget_detach,
-
-	.irq_mask	= MASK_10,
-	.irq_func	= ttpci_budget_irq10_handler,
-};
-
-static int __init budget_init(void)
-{
-	return saa7146_register_extension(&budget_extension);
-}
-
-static void __exit budget_exit(void)
-{
-	saa7146_unregister_extension(&budget_extension);
-}
-
-module_init(budget_init);
-module_exit(budget_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
-MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
-		   "budget PCI DVB cards by Siemens, Technotrend, Hauppauge");
diff --git a/drivers/media/dvb/ttpci/budget.h b/drivers/media/dvb/ttpci/budget.h
deleted file mode 100644
index 3d8a806..0000000
--- a/drivers/media/dvb/ttpci/budget.h
+++ /dev/null
@@ -1,124 +0,0 @@
-
-#ifndef __BUDGET_DVB__
-#define __BUDGET_DVB__
-
-#include "dvb_frontend.h"
-#include "dvbdev.h"
-#include "demux.h"
-#include "dvb_demux.h"
-#include "dmxdev.h"
-#include "dvb_filter.h"
-#include "dvb_net.h"
-
-#include <linux/module.h>
-#include <linux/mutex.h>
-
-#include <media/saa7146.h>
-
-extern int budget_debug;
-
-#ifdef dprintk
-#undef dprintk
-#endif
-
-#define dprintk(level,args...) \
-	    do { if ((budget_debug & level)) { printk("%s: %s(): ", KBUILD_MODNAME, __func__); printk(args); } } while (0)
-
-struct budget_info {
-	char *name;
-	int type;
-};
-
-/* place to store all the necessary device information */
-struct budget {
-
-	/* devices */
-	struct dvb_device dvb_dev;
-	struct dvb_net dvb_net;
-
-	struct saa7146_dev *dev;
-
-	struct i2c_adapter i2c_adap;
-	struct budget_info *card;
-
-	unsigned char *grabbing;
-	struct saa7146_pgtable pt;
-
-	struct tasklet_struct fidb_tasklet;
-	struct tasklet_struct vpe_tasklet;
-
-	struct dmxdev dmxdev;
-	struct dvb_demux demux;
-
-	struct dmx_frontend hw_frontend;
-	struct dmx_frontend mem_frontend;
-
-	int ci_present;
-	int video_port;
-
-	u32 buffer_width;
-	u32 buffer_height;
-	u32 buffer_size;
-	u32 buffer_warning_threshold;
-	u32 buffer_warnings;
-	unsigned long buffer_warning_time;
-
-	u32 ttbp;
-	int feeding;
-
-	spinlock_t feedlock;
-
-	spinlock_t debilock;
-
-	struct dvb_adapter dvb_adapter;
-	struct dvb_frontend *dvb_frontend;
-	int (*read_fe_status)(struct dvb_frontend *fe, fe_status_t *status);
-	int fe_synced;
-
-	void *priv;
-};
-
-#define MAKE_BUDGET_INFO(x_var,x_name,x_type) \
-static struct budget_info x_var ## _info = { \
-	.name=x_name,	\
-	.type=x_type };	\
-static struct saa7146_pci_extension_data x_var = { \
-	.ext_priv = &x_var ## _info, \
-	.ext = &budget_extension };
-
-#define BUDGET_TT		   0
-#define BUDGET_TT_HW_DISEQC	   1
-#define BUDGET_PATCH		   3
-#define BUDGET_FS_ACTIVY	   4
-#define BUDGET_CIN1200S		   5
-#define BUDGET_CIN1200C		   6
-#define BUDGET_CIN1200T		   7
-#define BUDGET_KNC1S		   8
-#define BUDGET_KNC1C		   9
-#define BUDGET_KNC1T		   10
-#define BUDGET_KNC1SP		   11
-#define BUDGET_KNC1CP		   12
-#define BUDGET_KNC1TP		   13
-#define BUDGET_TVSTAR		   14
-#define BUDGET_CIN1200C_MK3	   15
-#define BUDGET_KNC1C_MK3	   16
-#define BUDGET_KNC1CP_MK3	   17
-#define BUDGET_KNC1S2              18
-#define BUDGET_KNC1C_TDA10024	   19
-
-#define BUDGET_VIDEO_PORTA         0
-#define BUDGET_VIDEO_PORTB         1
-
-extern int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev,
-			     struct saa7146_pci_extension_data *info,
-			     struct module *owner, short *adapter_nums);
-extern void ttpci_budget_init_hooks(struct budget *budget);
-extern int ttpci_budget_deinit(struct budget *budget);
-extern void ttpci_budget_irq10_handler(struct saa7146_dev *dev, u32 * isr);
-extern void ttpci_budget_set_video_port(struct saa7146_dev *dev, int video_port);
-extern int ttpci_budget_debiread(struct budget *budget, u32 config, int addr, int count,
-				 int uselocks, int nobusyloop);
-extern int ttpci_budget_debiwrite(struct budget *budget, u32 config, int addr, int count, u32 value,
-				  int uselocks, int nobusyloop);
-
-#endif
diff --git a/drivers/media/dvb/ttpci/ttpci-eeprom.c b/drivers/media/dvb/ttpci/ttpci-eeprom.c
deleted file mode 100644
index 32d4315..0000000
--- a/drivers/media/dvb/ttpci/ttpci-eeprom.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
-    Retrieve encoded MAC address from 24C16 serial 2-wire EEPROM,
-    decode it and store it in the associated adapter struct for
-    use by dvb_net.c
-
-    This card appear to have the 24C16 write protect held to ground,
-    thus permitting normal read/write operation. Theoretically it
-    would be possible to write routines to burn a different (encoded)
-    MAC address into the EEPROM.
-
-    Robert Schlabbach	GMX
-    Michael Glaum	KVH Industries
-    Holger Waechtler	Convergence
-
-    Copyright (C) 2002-2003 Ralph Metzler <rjkm@metzlerbros.de>
-			    Metzler Brothers Systementwicklung GbR
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <asm/errno.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/i2c.h>
-
-#include "ttpci-eeprom.h"
-
-#if 1
-#define dprintk(x...) do { printk(x); } while (0)
-#else
-#define dprintk(x...) do { } while (0)
-#endif
-
-
-static int check_mac_tt(u8 *buf)
-{
-	int i;
-	u16 tmp = 0xffff;
-
-	for (i = 0; i < 8; i++) {
-		tmp  = (tmp << 8) | ((tmp >> 8) ^ buf[i]);
-		tmp ^= (tmp >> 4) & 0x0f;
-		tmp ^= (tmp << 12) ^ ((tmp & 0xff) << 5);
-	}
-	tmp ^= 0xffff;
-	return (((tmp >> 8) ^ buf[8]) | ((tmp & 0xff) ^ buf[9]));
-}
-
-static int getmac_tt(u8 * decodedMAC, u8 * encodedMAC)
-{
-	u8 xor[20] = { 0x72, 0x23, 0x68, 0x19, 0x5c, 0xa8, 0x71, 0x2c,
-		       0x54, 0xd3, 0x7b, 0xf1, 0x9E, 0x23, 0x16, 0xf6,
-		       0x1d, 0x36, 0x64, 0x78};
-	u8 data[20];
-	int i;
-
-	/* In case there is a sig check failure have the orig contents available */
-	memcpy(data, encodedMAC, 20);
-
-	for (i = 0; i < 20; i++)
-		data[i] ^= xor[i];
-	for (i = 0; i < 10; i++)
-		data[i] = ((data[2 * i + 1] << 8) | data[2 * i])
-			>> ((data[2 * i + 1] >> 6) & 3);
-
-	if (check_mac_tt(data))
-		return -ENODEV;
-
-	decodedMAC[0] = data[2]; decodedMAC[1] = data[1]; decodedMAC[2] = data[0];
-	decodedMAC[3] = data[6]; decodedMAC[4] = data[5]; decodedMAC[5] = data[4];
-	return 0;
-}
-
-int ttpci_eeprom_decode_mac(u8 *decodedMAC, u8 *encodedMAC)
-{
-	u8 xor[20] = { 0x72, 0x23, 0x68, 0x19, 0x5c, 0xa8, 0x71, 0x2c,
-		       0x54, 0xd3, 0x7b, 0xf1, 0x9E, 0x23, 0x16, 0xf6,
-		       0x1d, 0x36, 0x64, 0x78};
-	u8 data[20];
-	int i;
-
-	memcpy(data, encodedMAC, 20);
-
-	for (i = 0; i < 20; i++)
-		data[i] ^= xor[i];
-	for (i = 0; i < 10; i++)
-		data[i] = ((data[2 * i + 1] << 8) | data[2 * i])
-			>> ((data[2 * i + 1] >> 6) & 3);
-
-	if (check_mac_tt(data))
-		return -ENODEV;
-
-	decodedMAC[0] = data[2];
-	decodedMAC[1] = data[1];
-	decodedMAC[2] = data[0];
-	decodedMAC[3] = data[6];
-	decodedMAC[4] = data[5];
-	decodedMAC[5] = data[4];
-	return 0;
-}
-EXPORT_SYMBOL(ttpci_eeprom_decode_mac);
-
-static int ttpci_eeprom_read_encodedMAC(struct i2c_adapter *adapter, u8 * encodedMAC)
-{
-	int ret;
-	u8 b0[] = { 0xcc };
-
-	struct i2c_msg msg[] = {
-		{ .addr = 0x50, .flags = 0, .buf = b0, .len = 1 },
-		{ .addr = 0x50, .flags = I2C_M_RD, .buf = encodedMAC, .len = 20 }
-	};
-
-	/* dprintk("%s\n", __func__); */
-
-	ret = i2c_transfer(adapter, msg, 2);
-
-	if (ret != 2)		/* Assume EEPROM isn't there */
-		return (-ENODEV);
-
-	return 0;
-}
-
-
-int ttpci_eeprom_parse_mac(struct i2c_adapter *adapter, u8 *proposed_mac)
-{
-	int ret, i;
-	u8 encodedMAC[20];
-	u8 decodedMAC[6];
-
-	ret = ttpci_eeprom_read_encodedMAC(adapter, encodedMAC);
-
-	if (ret != 0) {		/* Will only be -ENODEV */
-		dprintk("Couldn't read from EEPROM: not there?\n");
-		memset(proposed_mac, 0, 6);
-		return ret;
-	}
-
-	ret = getmac_tt(decodedMAC, encodedMAC);
-	if( ret != 0 ) {
-		dprintk("adapter failed MAC signature check\n");
-		dprintk("encoded MAC from EEPROM was " );
-		for(i=0; i<19; i++) {
-			dprintk( "%.2x:", encodedMAC[i]);
-		}
-		dprintk("%.2x\n", encodedMAC[19]);
-		memset(proposed_mac, 0, 6);
-		return ret;
-	}
-
-	memcpy(proposed_mac, decodedMAC, 6);
-	dprintk("adapter has MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
-		decodedMAC[0], decodedMAC[1], decodedMAC[2],
-		decodedMAC[3], decodedMAC[4], decodedMAC[5]);
-	return 0;
-}
-
-EXPORT_SYMBOL(ttpci_eeprom_parse_mac);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, others");
-MODULE_DESCRIPTION("Decode dvb_net MAC address from EEPROM of PCI DVB cards "
-		"made by Siemens, Technotrend, Hauppauge");
diff --git a/drivers/media/dvb/ttpci/ttpci-eeprom.h b/drivers/media/dvb/ttpci/ttpci-eeprom.h
deleted file mode 100644
index dcc33d5..0000000
--- a/drivers/media/dvb/ttpci/ttpci-eeprom.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
-    Retrieve encoded MAC address from ATMEL ttpci_eeprom serial 2-wire EEPROM,
-    decode it and store it in associated adapter net device
-
-    Robert Schlabbach	GMX
-    Michael Glaum	KVH Industries
-    Holger Waechtler	Convergence
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef __TTPCI_EEPROM_H__
-#define __TTPCI_EEPROM_H__
-
-#include <linux/types.h>
-#include <linux/i2c.h>
-
-extern int ttpci_eeprom_decode_mac(u8 *decodedMAC, u8 *encodedMAC);
-extern int ttpci_eeprom_parse_mac(struct i2c_adapter *adapter, u8 *propsed_mac);
-
-#endif
diff --git a/drivers/media/dvb/ttusb-budget/Kconfig b/drivers/media/dvb/ttusb-budget/Kconfig
deleted file mode 100644
index 2663ae3..0000000
--- a/drivers/media/dvb/ttusb-budget/Kconfig
+++ /dev/null
@@ -1,18 +0,0 @@
-config DVB_TTUSB_BUDGET
-	tristate "Technotrend/Hauppauge Nova-USB devices"
-	depends on DVB_CORE && USB && I2C && PCI
-	select DVB_CX22700 if !DVB_FE_CUSTOMISE
-	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
-	select DVB_VES1820 if !DVB_FE_CUSTOMISE
-	select DVB_TDA8083 if !DVB_FE_CUSTOMISE
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_STV0297 if !DVB_FE_CUSTOMISE
-	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
-	help
-	  Support for external USB adapters designed by Technotrend and
-	  produced by Hauppauge, shipped under the brand name 'Nova-USB'.
-
-	  These devices don't have a MPEG decoder built in, so you need
-	  an external software decoder to watch TV.
-
-	  Say Y if you own such a device and want to use it.
diff --git a/drivers/media/dvb/ttusb-budget/Makefile b/drivers/media/dvb/ttusb-budget/Makefile
deleted file mode 100644
index 8d6c4ac..0000000
--- a/drivers/media/dvb/ttusb-budget/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-$(CONFIG_DVB_TTUSB_BUDGET) += dvb-ttusb-budget.o
-
-ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends
diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
deleted file mode 100644
index 5b682cc..0000000
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ /dev/null
@@ -1,1816 +0,0 @@
-/*
- * TTUSB DVB driver
- *
- * Copyright (c) 2002 Holger Waechtler <holger@convergence.de>
- * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net>
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation; either version 2 of
- *	the License, or (at your option) any later version.
- */
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/wait.h>
-#include <linux/fs.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/delay.h>
-#include <linux/time.h>
-#include <linux/errno.h>
-#include <linux/jiffies.h>
-#include <linux/mutex.h>
-#include <linux/firmware.h>
-
-#include "dvb_frontend.h"
-#include "dmxdev.h"
-#include "dvb_demux.h"
-#include "dvb_net.h"
-#include "ves1820.h"
-#include "cx22700.h"
-#include "tda1004x.h"
-#include "stv0299.h"
-#include "tda8083.h"
-#include "stv0297.h"
-#include "lnbp21.h"
-
-#include <linux/dvb/frontend.h>
-#include <linux/dvb/dmx.h>
-#include <linux/pci.h>
-
-/*
-  TTUSB_HWSECTIONS:
-    the DSP supports filtering in hardware, however, since the "muxstream"
-    is a bit braindead (no matching channel masks or no matching filter mask),
-    we won't support this - yet. it doesn't event support negative filters,
-    so the best way is maybe to keep TTUSB_HWSECTIONS undef'd and just
-    parse TS data. USB bandwidth will be a problem when having large
-    datastreams, especially for dvb-net, but hey, that's not my problem.
-
-  TTUSB_DISEQC, TTUSB_TONE:
-    let the STC do the diseqc/tone stuff. this isn't supported at least with
-    my TTUSB, so let it undef'd unless you want to implement another
-    frontend. never tested.
-
-  debug:
-    define it to > 3 for really hardcore debugging. you probably don't want
-    this unless the device doesn't load at all. > 2 for bandwidth statistics.
-*/
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-#define dprintk(x...) do { if (debug) printk(KERN_DEBUG x); } while (0)
-
-#define ISO_BUF_COUNT      4
-#define FRAMES_PER_ISO_BUF 4
-#define ISO_FRAME_SIZE     912
-#define TTUSB_MAXCHANNEL   32
-#ifdef TTUSB_HWSECTIONS
-#define TTUSB_MAXFILTER    16	/* ??? */
-#endif
-
-#define TTUSB_REV_2_2	0x22
-#define TTUSB_BUDGET_NAME "ttusb_stc_fw"
-
-/**
- *  since we're casting (struct ttusb*) <-> (struct dvb_demux*) around
- *  the dvb_demux field must be the first in struct!!
- */
-struct ttusb {
-	struct dvb_demux dvb_demux;
-	struct dmxdev dmxdev;
-	struct dvb_net dvbnet;
-
-	/* and one for USB access. */
-	struct mutex semi2c;
-	struct mutex semusb;
-
-	struct dvb_adapter adapter;
-	struct usb_device *dev;
-
-	struct i2c_adapter i2c_adap;
-
-	int disconnecting;
-	int iso_streaming;
-
-	unsigned int bulk_out_pipe;
-	unsigned int bulk_in_pipe;
-	unsigned int isoc_in_pipe;
-
-	void *iso_buffer;
-	dma_addr_t iso_dma_handle;
-
-	struct urb *iso_urb[ISO_BUF_COUNT];
-
-	int running_feed_count;
-	int last_channel;
-	int last_filter;
-
-	u8 c;			/* transaction counter, wraps around...  */
-	fe_sec_tone_mode_t tone;
-	fe_sec_voltage_t voltage;
-
-	int mux_state;		// 0..2 - MuxSyncWord, 3 - nMuxPacks,    4 - muxpack
-	u8 mux_npacks;
-	u8 muxpack[256 + 8];
-	int muxpack_ptr, muxpack_len;
-
-	int insync;
-
-	int cc;			/* MuxCounter - will increment on EVERY MUX PACKET */
-	/* (including stuffing. yes. really.) */
-
-	u8 last_result[32];
-
-	int revision;
-
-	struct dvb_frontend* fe;
-};
-
-/* ugly workaround ... don't know why it's necessary to read */
-/* all result codes. */
-
-static int ttusb_cmd(struct ttusb *ttusb,
-	      const u8 * data, int len, int needresult)
-{
-	int actual_len;
-	int err;
-	int i;
-
-	if (debug >= 3) {
-		printk(KERN_DEBUG ">");
-		for (i = 0; i < len; ++i)
-			printk(KERN_CONT " %02x", data[i]);
-		printk(KERN_CONT "\n");
-	}
-
-	if (mutex_lock_interruptible(&ttusb->semusb) < 0)
-		return -EAGAIN;
-
-	err = usb_bulk_msg(ttusb->dev, ttusb->bulk_out_pipe,
-			   (u8 *) data, len, &actual_len, 1000);
-	if (err != 0) {
-		dprintk("%s: usb_bulk_msg(send) failed, err == %i!\n",
-			__func__, err);
-		mutex_unlock(&ttusb->semusb);
-		return err;
-	}
-	if (actual_len != len) {
-		dprintk("%s: only wrote %d of %d bytes\n", __func__,
-			actual_len, len);
-		mutex_unlock(&ttusb->semusb);
-		return -1;
-	}
-
-	err = usb_bulk_msg(ttusb->dev, ttusb->bulk_in_pipe,
-			   ttusb->last_result, 32, &actual_len, 1000);
-
-	if (err != 0) {
-		printk("%s: failed, receive error %d\n", __func__,
-		       err);
-		mutex_unlock(&ttusb->semusb);
-		return err;
-	}
-
-	if (debug >= 3) {
-		actual_len = ttusb->last_result[3] + 4;
-		printk(KERN_DEBUG "<");
-		for (i = 0; i < actual_len; ++i)
-			printk(KERN_CONT " %02x", ttusb->last_result[i]);
-		printk(KERN_CONT "\n");
-	}
-
-	if (!needresult)
-		mutex_unlock(&ttusb->semusb);
-	return 0;
-}
-
-static int ttusb_result(struct ttusb *ttusb, u8 * data, int len)
-{
-	memcpy(data, ttusb->last_result, len);
-	mutex_unlock(&ttusb->semusb);
-	return 0;
-}
-
-static int ttusb_i2c_msg(struct ttusb *ttusb,
-		  u8 addr, u8 * snd_buf, u8 snd_len, u8 * rcv_buf,
-		  u8 rcv_len)
-{
-	u8 b[0x28];
-	u8 id = ++ttusb->c;
-	int i, err;
-
-	if (snd_len > 0x28 - 7 || rcv_len > 0x20 - 7)
-		return -EINVAL;
-
-	b[0] = 0xaa;
-	b[1] = id;
-	b[2] = 0x31;
-	b[3] = snd_len + 3;
-	b[4] = addr << 1;
-	b[5] = snd_len;
-	b[6] = rcv_len;
-
-	for (i = 0; i < snd_len; i++)
-		b[7 + i] = snd_buf[i];
-
-	err = ttusb_cmd(ttusb, b, snd_len + 7, 1);
-
-	if (err)
-		return -EREMOTEIO;
-
-	err = ttusb_result(ttusb, b, 0x20);
-
-	/* check if the i2c transaction was successful */
-	if ((snd_len != b[5]) || (rcv_len != b[6])) return -EREMOTEIO;
-
-	if (rcv_len > 0) {
-
-		if (err || b[0] != 0x55 || b[1] != id) {
-			dprintk
-			    ("%s: usb_bulk_msg(recv) failed, err == %i, id == %02x, b == ",
-			     __func__, err, id);
-			return -EREMOTEIO;
-		}
-
-		for (i = 0; i < rcv_len; i++)
-			rcv_buf[i] = b[7 + i];
-	}
-
-	return rcv_len;
-}
-
-static int master_xfer(struct i2c_adapter* adapter, struct i2c_msg *msg, int num)
-{
-	struct ttusb *ttusb = i2c_get_adapdata(adapter);
-	int i = 0;
-	int inc;
-
-	if (mutex_lock_interruptible(&ttusb->semi2c) < 0)
-		return -EAGAIN;
-
-	while (i < num) {
-		u8 addr, snd_len, rcv_len, *snd_buf, *rcv_buf;
-		int err;
-
-		if (num > i + 1 && (msg[i + 1].flags & I2C_M_RD)) {
-			addr = msg[i].addr;
-			snd_buf = msg[i].buf;
-			snd_len = msg[i].len;
-			rcv_buf = msg[i + 1].buf;
-			rcv_len = msg[i + 1].len;
-			inc = 2;
-		} else {
-			addr = msg[i].addr;
-			snd_buf = msg[i].buf;
-			snd_len = msg[i].len;
-			rcv_buf = NULL;
-			rcv_len = 0;
-			inc = 1;
-		}
-
-		err = ttusb_i2c_msg(ttusb, addr,
-				    snd_buf, snd_len, rcv_buf, rcv_len);
-
-		if (err < rcv_len) {
-			dprintk("%s: i == %i\n", __func__, i);
-			break;
-		}
-
-		i += inc;
-	}
-
-	mutex_unlock(&ttusb->semi2c);
-	return i;
-}
-
-static int ttusb_boot_dsp(struct ttusb *ttusb)
-{
-	const struct firmware *fw;
-	int i, err;
-	u8 b[40];
-
-	err = request_firmware(&fw, "ttusb-budget/dspbootcode.bin",
-			       &ttusb->dev->dev);
-	if (err) {
-		printk(KERN_ERR "ttusb-budget: failed to request firmware\n");
-		return err;
-	}
-
-	/* BootBlock */
-	b[0] = 0xaa;
-	b[2] = 0x13;
-	b[3] = 28;
-
-	/* upload dsp code in 32 byte steps (36 didn't work for me ...) */
-	/* 32 is max packet size, no messages should be splitted. */
-	for (i = 0; i < fw->size; i += 28) {
-		memcpy(&b[4], &fw->data[i], 28);
-
-		b[1] = ++ttusb->c;
-
-		err = ttusb_cmd(ttusb, b, 32, 0);
-		if (err)
-			goto done;
-	}
-
-	/* last block ... */
-	b[1] = ++ttusb->c;
-	b[2] = 0x13;
-	b[3] = 0;
-
-	err = ttusb_cmd(ttusb, b, 4, 0);
-	if (err)
-		goto done;
-
-	/* BootEnd */
-	b[1] = ++ttusb->c;
-	b[2] = 0x14;
-	b[3] = 0;
-
-	err = ttusb_cmd(ttusb, b, 4, 0);
-
-      done:
-	release_firmware(fw);
-	if (err) {
-		dprintk("%s: usb_bulk_msg() failed, return value %i!\n",
-			__func__, err);
-	}
-
-	return err;
-}
-
-static int ttusb_set_channel(struct ttusb *ttusb, int chan_id, int filter_type,
-		      int pid)
-{
-	int err;
-	/* SetChannel */
-	u8 b[] = { 0xaa, ++ttusb->c, 0x22, 4, chan_id, filter_type,
-		(pid >> 8) & 0xff, pid & 0xff
-	};
-
-	err = ttusb_cmd(ttusb, b, sizeof(b), 0);
-	return err;
-}
-
-static int ttusb_del_channel(struct ttusb *ttusb, int channel_id)
-{
-	int err;
-	/* DelChannel */
-	u8 b[] = { 0xaa, ++ttusb->c, 0x23, 1, channel_id };
-
-	err = ttusb_cmd(ttusb, b, sizeof(b), 0);
-	return err;
-}
-
-#ifdef TTUSB_HWSECTIONS
-static int ttusb_set_filter(struct ttusb *ttusb, int filter_id,
-		     int associated_chan, u8 filter[8], u8 mask[8])
-{
-	int err;
-	/* SetFilter */
-	u8 b[] = { 0xaa, 0, 0x24, 0x1a, filter_id, associated_chan,
-		filter[0], filter[1], filter[2], filter[3],
-		filter[4], filter[5], filter[6], filter[7],
-		filter[8], filter[9], filter[10], filter[11],
-		mask[0], mask[1], mask[2], mask[3],
-		mask[4], mask[5], mask[6], mask[7],
-		mask[8], mask[9], mask[10], mask[11]
-	};
-
-	err = ttusb_cmd(ttusb, b, sizeof(b), 0);
-	return err;
-}
-
-static int ttusb_del_filter(struct ttusb *ttusb, int filter_id)
-{
-	int err;
-	/* DelFilter */
-	u8 b[] = { 0xaa, ++ttusb->c, 0x25, 1, filter_id };
-
-	err = ttusb_cmd(ttusb, b, sizeof(b), 0);
-	return err;
-}
-#endif
-
-static int ttusb_init_controller(struct ttusb *ttusb)
-{
-	u8 b0[] = { 0xaa, ++ttusb->c, 0x15, 1, 0 };
-	u8 b1[] = { 0xaa, ++ttusb->c, 0x15, 1, 1 };
-	u8 b2[] = { 0xaa, ++ttusb->c, 0x32, 1, 0 };
-	/* i2c write read: 5 bytes, addr 0x10, 0x02 bytes write, 1 bytes read. */
-	u8 b3[] =
-	    { 0xaa, ++ttusb->c, 0x31, 5, 0x10, 0x02, 0x01, 0x00, 0x1e };
-	u8 b4[] =
-	    { 0x55, ttusb->c, 0x31, 4, 0x10, 0x02, 0x01, 0x00, 0x1e };
-
-	u8 get_version[] = { 0xaa, ++ttusb->c, 0x17, 5, 0, 0, 0, 0, 0 };
-	u8 get_dsp_version[0x20] =
-	    { 0xaa, ++ttusb->c, 0x26, 28, 0, 0, 0, 0, 0 };
-	int err;
-
-	/* reset board */
-	if ((err = ttusb_cmd(ttusb, b0, sizeof(b0), 0)))
-		return err;
-
-	/* reset board (again?) */
-	if ((err = ttusb_cmd(ttusb, b1, sizeof(b1), 0)))
-		return err;
-
-	ttusb_boot_dsp(ttusb);
-
-	/* set i2c bit rate */
-	if ((err = ttusb_cmd(ttusb, b2, sizeof(b2), 0)))
-		return err;
-
-	if ((err = ttusb_cmd(ttusb, b3, sizeof(b3), 1)))
-		return err;
-
-	err = ttusb_result(ttusb, b4, sizeof(b4));
-
-	if ((err = ttusb_cmd(ttusb, get_version, sizeof(get_version), 1)))
-		return err;
-
-	if ((err = ttusb_result(ttusb, get_version, sizeof(get_version))))
-		return err;
-
-	dprintk("%s: stc-version: %c%c%c%c%c\n", __func__,
-		get_version[4], get_version[5], get_version[6],
-		get_version[7], get_version[8]);
-
-	if (memcmp(get_version + 4, "V 0.0", 5) &&
-	    memcmp(get_version + 4, "V 1.1", 5) &&
-	    memcmp(get_version + 4, "V 2.1", 5) &&
-	    memcmp(get_version + 4, "V 2.2", 5)) {
-		printk
-		    ("%s: unknown STC version %c%c%c%c%c, please report!\n",
-		     __func__, get_version[4], get_version[5],
-		     get_version[6], get_version[7], get_version[8]);
-	}
-
-	ttusb->revision = ((get_version[6] - '0') << 4) |
-			   (get_version[8] - '0');
-
-	err =
-	    ttusb_cmd(ttusb, get_dsp_version, sizeof(get_dsp_version), 1);
-	if (err)
-		return err;
-
-	err =
-	    ttusb_result(ttusb, get_dsp_version, sizeof(get_dsp_version));
-	if (err)
-		return err;
-	printk("%s: dsp-version: %c%c%c\n", __func__,
-	       get_dsp_version[4], get_dsp_version[5], get_dsp_version[6]);
-	return 0;
-}
-
-#ifdef TTUSB_DISEQC
-static int ttusb_send_diseqc(struct dvb_frontend* fe,
-			     const struct dvb_diseqc_master_cmd *cmd)
-{
-	struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv;
-	u8 b[12] = { 0xaa, ++ttusb->c, 0x18 };
-
-	int err;
-
-	b[3] = 4 + 2 + cmd->msg_len;
-	b[4] = 0xFF;		/* send diseqc master, not burst */
-	b[5] = cmd->msg_len;
-
-	memcpy(b + 5, cmd->msg, cmd->msg_len);
-
-	/* Diseqc */
-	if ((err = ttusb_cmd(ttusb, b, 4 + b[3], 0))) {
-		dprintk("%s: usb_bulk_msg() failed, return value %i!\n",
-			__func__, err);
-	}
-
-	return err;
-}
-#endif
-
-static int ttusb_update_lnb(struct ttusb *ttusb)
-{
-	u8 b[] = { 0xaa, ++ttusb->c, 0x16, 5, /*power: */ 1,
-		ttusb->voltage == SEC_VOLTAGE_18 ? 0 : 1,
-		ttusb->tone == SEC_TONE_ON ? 1 : 0, 1, 1
-	};
-	int err;
-
-	/* SetLNB */
-	if ((err = ttusb_cmd(ttusb, b, sizeof(b), 0))) {
-		dprintk("%s: usb_bulk_msg() failed, return value %i!\n",
-			__func__, err);
-	}
-
-	return err;
-}
-
-static int ttusb_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
-{
-	struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv;
-
-	ttusb->voltage = voltage;
-	return ttusb_update_lnb(ttusb);
-}
-
-#ifdef TTUSB_TONE
-static int ttusb_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
-{
-	struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv;
-
-	ttusb->tone = tone;
-	return ttusb_update_lnb(ttusb);
-}
-#endif
-
-
-#if 0
-static void ttusb_set_led_freq(struct ttusb *ttusb, u8 freq)
-{
-	u8 b[] = { 0xaa, ++ttusb->c, 0x19, 1, freq };
-	int err, actual_len;
-
-	err = ttusb_cmd(ttusb, b, sizeof(b), 0);
-	if (err) {
-		dprintk("%s: usb_bulk_msg() failed, return value %i!\n",
-			__func__, err);
-	}
-}
-#endif
-
-/*****************************************************************************/
-
-#ifdef TTUSB_HWSECTIONS
-static void ttusb_handle_ts_data(struct ttusb_channel *channel,
-				 const u8 * data, int len);
-static void ttusb_handle_sec_data(struct ttusb_channel *channel,
-				  const u8 * data, int len);
-#endif
-
-static int numpkt, numts, numstuff, numsec, numinvalid;
-static unsigned long lastj;
-
-static void ttusb_process_muxpack(struct ttusb *ttusb, const u8 * muxpack,
-			   int len)
-{
-	u16 csum = 0, cc;
-	int i;
-	for (i = 0; i < len; i += 2)
-		csum ^= le16_to_cpup((__le16 *) (muxpack + i));
-	if (csum) {
-		printk("%s: muxpack with incorrect checksum, ignoring\n",
-		       __func__);
-		numinvalid++;
-		return;
-	}
-
-	cc = (muxpack[len - 4] << 8) | muxpack[len - 3];
-	cc &= 0x7FFF;
-	if ((cc != ttusb->cc) && (ttusb->cc != -1))
-		printk("%s: cc discontinuity (%d frames missing)\n",
-		       __func__, (cc - ttusb->cc) & 0x7FFF);
-	ttusb->cc = (cc + 1) & 0x7FFF;
-	if (muxpack[0] & 0x80) {
-#ifdef TTUSB_HWSECTIONS
-		/* section data */
-		int pusi = muxpack[0] & 0x40;
-		int channel = muxpack[0] & 0x1F;
-		int payload = muxpack[1];
-		const u8 *data = muxpack + 2;
-		/* check offset flag */
-		if (muxpack[0] & 0x20)
-			data++;
-
-		ttusb_handle_sec_data(ttusb->channel + channel, data,
-				      payload);
-		data += payload;
-
-		if ((!!(ttusb->muxpack[0] & 0x20)) ^
-		    !!(ttusb->muxpack[1] & 1))
-			data++;
-#warning TODO: pusi
-		printk("cc: %04x\n", (data[0] << 8) | data[1]);
-#endif
-		numsec++;
-	} else if (muxpack[0] == 0x47) {
-#ifdef TTUSB_HWSECTIONS
-		/* we have TS data here! */
-		int pid = ((muxpack[1] & 0x0F) << 8) | muxpack[2];
-		int channel;
-		for (channel = 0; channel < TTUSB_MAXCHANNEL; ++channel)
-			if (ttusb->channel[channel].active
-			    && (pid == ttusb->channel[channel].pid))
-				ttusb_handle_ts_data(ttusb->channel +
-						     channel, muxpack,
-						     188);
-#endif
-		numts++;
-		dvb_dmx_swfilter_packets(&ttusb->dvb_demux, muxpack, 1);
-	} else if (muxpack[0] != 0) {
-		numinvalid++;
-		printk("illegal muxpack type %02x\n", muxpack[0]);
-	} else
-		numstuff++;
-}
-
-static void ttusb_process_frame(struct ttusb *ttusb, u8 * data, int len)
-{
-	int maxwork = 1024;
-	while (len) {
-		if (!(maxwork--)) {
-			printk("%s: too much work\n", __func__);
-			break;
-		}
-
-		switch (ttusb->mux_state) {
-		case 0:
-		case 1:
-		case 2:
-			len--;
-			if (*data++ == 0xAA)
-				++ttusb->mux_state;
-			else {
-				ttusb->mux_state = 0;
-				if (ttusb->insync) {
-					dprintk("%s: %02x\n",
-						__func__, data[-1]);
-					printk(KERN_INFO "%s: lost sync.\n",
-					       __func__);
-					ttusb->insync = 0;
-				}
-			}
-			break;
-		case 3:
-			ttusb->insync = 1;
-			len--;
-			ttusb->mux_npacks = *data++;
-			++ttusb->mux_state;
-			ttusb->muxpack_ptr = 0;
-			/* maximum bytes, until we know the length */
-			ttusb->muxpack_len = 2;
-			break;
-		case 4:
-			{
-				int avail;
-				avail = len;
-				if (avail >
-				    (ttusb->muxpack_len -
-				     ttusb->muxpack_ptr))
-					avail =
-					    ttusb->muxpack_len -
-					    ttusb->muxpack_ptr;
-				memcpy(ttusb->muxpack + ttusb->muxpack_ptr,
-				       data, avail);
-				ttusb->muxpack_ptr += avail;
-				BUG_ON(ttusb->muxpack_ptr > 264);
-				data += avail;
-				len -= avail;
-				/* determine length */
-				if (ttusb->muxpack_ptr == 2) {
-					if (ttusb->muxpack[0] & 0x80) {
-						ttusb->muxpack_len =
-						    ttusb->muxpack[1] + 2;
-						if (ttusb->
-						    muxpack[0] & 0x20)
-							ttusb->
-							    muxpack_len++;
-						if ((!!
-						     (ttusb->
-						      muxpack[0] & 0x20)) ^
-						    !!(ttusb->
-						       muxpack[1] & 1))
-							ttusb->
-							    muxpack_len++;
-						ttusb->muxpack_len += 4;
-					} else if (ttusb->muxpack[0] ==
-						   0x47)
-						ttusb->muxpack_len =
-						    188 + 4;
-					else if (ttusb->muxpack[0] == 0x00)
-						ttusb->muxpack_len =
-						    ttusb->muxpack[1] + 2 +
-						    4;
-					else {
-						dprintk
-						    ("%s: invalid state: first byte is %x\n",
-						     __func__,
-						     ttusb->muxpack[0]);
-						ttusb->mux_state = 0;
-					}
-				}
-
-			/**
-			 * if length is valid and we reached the end:
-			 * goto next muxpack
-			 */
-				if ((ttusb->muxpack_ptr >= 2) &&
-				    (ttusb->muxpack_ptr ==
-				     ttusb->muxpack_len)) {
-					ttusb_process_muxpack(ttusb,
-							      ttusb->
-							      muxpack,
-							      ttusb->
-							      muxpack_ptr);
-					ttusb->muxpack_ptr = 0;
-					/* maximum bytes, until we know the length */
-					ttusb->muxpack_len = 2;
-
-				/**
-				 * no muxpacks left?
-				 * return to search-sync state
-				 */
-					if (!ttusb->mux_npacks--) {
-						ttusb->mux_state = 0;
-						break;
-					}
-				}
-				break;
-			}
-		default:
-			BUG();
-			break;
-		}
-	}
-}
-
-static void ttusb_iso_irq(struct urb *urb)
-{
-	struct ttusb *ttusb = urb->context;
-	struct usb_iso_packet_descriptor *d;
-	u8 *data;
-	int len, i;
-
-	if (!ttusb->iso_streaming)
-		return;
-
-#if 0
-	printk("%s: status %d, errcount == %d, length == %i\n",
-	       __func__,
-	       urb->status, urb->error_count, urb->actual_length);
-#endif
-
-	if (!urb->status) {
-		for (i = 0; i < urb->number_of_packets; ++i) {
-			numpkt++;
-			if (time_after_eq(jiffies, lastj + HZ)) {
-				dprintk("frames/s: %lu (ts: %d, stuff %d, "
-					"sec: %d, invalid: %d, all: %d)\n",
-					numpkt * HZ / (jiffies - lastj),
-					numts, numstuff, numsec, numinvalid,
-					numts + numstuff + numsec + numinvalid);
-				numts = numstuff = numsec = numinvalid = 0;
-				lastj = jiffies;
-				numpkt = 0;
-			}
-			d = &urb->iso_frame_desc[i];
-			data = urb->transfer_buffer + d->offset;
-			len = d->actual_length;
-			d->actual_length = 0;
-			d->status = 0;
-			ttusb_process_frame(ttusb, data, len);
-		}
-	}
-	usb_submit_urb(urb, GFP_ATOMIC);
-}
-
-static void ttusb_free_iso_urbs(struct ttusb *ttusb)
-{
-	int i;
-
-	for (i = 0; i < ISO_BUF_COUNT; i++)
-		if (ttusb->iso_urb[i])
-			usb_free_urb(ttusb->iso_urb[i]);
-
-	pci_free_consistent(NULL,
-			    ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF *
-			    ISO_BUF_COUNT, ttusb->iso_buffer,
-			    ttusb->iso_dma_handle);
-}
-
-static int ttusb_alloc_iso_urbs(struct ttusb *ttusb)
-{
-	int i;
-
-	ttusb->iso_buffer = pci_alloc_consistent(NULL,
-						 ISO_FRAME_SIZE *
-						 FRAMES_PER_ISO_BUF *
-						 ISO_BUF_COUNT,
-						 &ttusb->iso_dma_handle);
-
-	if (!ttusb->iso_buffer) {
-		dprintk("%s: pci_alloc_consistent - not enough memory\n",
-			__func__);
-		return -ENOMEM;
-	}
-
-	memset(ttusb->iso_buffer, 0,
-	       ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF * ISO_BUF_COUNT);
-
-	for (i = 0; i < ISO_BUF_COUNT; i++) {
-		struct urb *urb;
-
-		if (!
-		    (urb =
-		     usb_alloc_urb(FRAMES_PER_ISO_BUF, GFP_ATOMIC))) {
-			ttusb_free_iso_urbs(ttusb);
-			return -ENOMEM;
-		}
-
-		ttusb->iso_urb[i] = urb;
-	}
-
-	return 0;
-}
-
-static void ttusb_stop_iso_xfer(struct ttusb *ttusb)
-{
-	int i;
-
-	for (i = 0; i < ISO_BUF_COUNT; i++)
-		usb_kill_urb(ttusb->iso_urb[i]);
-
-	ttusb->iso_streaming = 0;
-}
-
-static int ttusb_start_iso_xfer(struct ttusb *ttusb)
-{
-	int i, j, err, buffer_offset = 0;
-
-	if (ttusb->iso_streaming) {
-		printk("%s: iso xfer already running!\n", __func__);
-		return 0;
-	}
-
-	ttusb->cc = -1;
-	ttusb->insync = 0;
-	ttusb->mux_state = 0;
-
-	for (i = 0; i < ISO_BUF_COUNT; i++) {
-		int frame_offset = 0;
-		struct urb *urb = ttusb->iso_urb[i];
-
-		urb->dev = ttusb->dev;
-		urb->context = ttusb;
-		urb->complete = ttusb_iso_irq;
-		urb->pipe = ttusb->isoc_in_pipe;
-		urb->transfer_flags = URB_ISO_ASAP;
-		urb->interval = 1;
-		urb->number_of_packets = FRAMES_PER_ISO_BUF;
-		urb->transfer_buffer_length =
-		    ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF;
-		urb->transfer_buffer = ttusb->iso_buffer + buffer_offset;
-		buffer_offset += ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF;
-
-		for (j = 0; j < FRAMES_PER_ISO_BUF; j++) {
-			urb->iso_frame_desc[j].offset = frame_offset;
-			urb->iso_frame_desc[j].length = ISO_FRAME_SIZE;
-			frame_offset += ISO_FRAME_SIZE;
-		}
-	}
-
-	for (i = 0; i < ISO_BUF_COUNT; i++) {
-		if ((err = usb_submit_urb(ttusb->iso_urb[i], GFP_ATOMIC))) {
-			ttusb_stop_iso_xfer(ttusb);
-			printk
-			    ("%s: failed urb submission (%i: err = %i)!\n",
-			     __func__, i, err);
-			return err;
-		}
-	}
-
-	ttusb->iso_streaming = 1;
-
-	return 0;
-}
-
-#ifdef TTUSB_HWSECTIONS
-static void ttusb_handle_ts_data(struct dvb_demux_feed *dvbdmxfeed, const u8 * data,
-			  int len)
-{
-	dvbdmxfeed->cb.ts(data, len, 0, 0, &dvbdmxfeed->feed.ts, 0);
-}
-
-static void ttusb_handle_sec_data(struct dvb_demux_feed *dvbdmxfeed, const u8 * data,
-			   int len)
-{
-//      struct dvb_demux_feed *dvbdmxfeed = channel->dvbdmxfeed;
-#error TODO: handle ugly stuff
-//      dvbdmxfeed->cb.sec(data, len, 0, 0, &dvbdmxfeed->feed.sec, 0);
-}
-#endif
-
-static int ttusb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct ttusb *ttusb = (struct ttusb *) dvbdmxfeed->demux;
-	int feed_type = 1;
-
-	dprintk("ttusb_start_feed\n");
-
-	switch (dvbdmxfeed->type) {
-	case DMX_TYPE_TS:
-		break;
-	case DMX_TYPE_SEC:
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (dvbdmxfeed->type == DMX_TYPE_TS) {
-		switch (dvbdmxfeed->pes_type) {
-		case DMX_TS_PES_VIDEO:
-		case DMX_TS_PES_AUDIO:
-		case DMX_TS_PES_TELETEXT:
-		case DMX_TS_PES_PCR:
-		case DMX_TS_PES_OTHER:
-			break;
-		default:
-			return -EINVAL;
-		}
-	}
-
-#ifdef TTUSB_HWSECTIONS
-#error TODO: allocate filters
-	if (dvbdmxfeed->type == DMX_TYPE_TS) {
-		feed_type = 1;
-	} else if (dvbdmxfeed->type == DMX_TYPE_SEC) {
-		feed_type = 2;
-	}
-#endif
-
-	ttusb_set_channel(ttusb, dvbdmxfeed->index, feed_type, dvbdmxfeed->pid);
-
-	if (0 == ttusb->running_feed_count++)
-		ttusb_start_iso_xfer(ttusb);
-
-	return 0;
-}
-
-static int ttusb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct ttusb *ttusb = (struct ttusb *) dvbdmxfeed->demux;
-
-	ttusb_del_channel(ttusb, dvbdmxfeed->index);
-
-	if (--ttusb->running_feed_count == 0)
-		ttusb_stop_iso_xfer(ttusb);
-
-	return 0;
-}
-
-static int ttusb_setup_interfaces(struct ttusb *ttusb)
-{
-	usb_set_interface(ttusb->dev, 1, 1);
-
-	ttusb->bulk_out_pipe = usb_sndbulkpipe(ttusb->dev, 1);
-	ttusb->bulk_in_pipe = usb_rcvbulkpipe(ttusb->dev, 1);
-	ttusb->isoc_in_pipe = usb_rcvisocpipe(ttusb->dev, 2);
-
-	return 0;
-}
-
-#if 0
-static u8 stc_firmware[8192];
-
-static int stc_open(struct inode *inode, struct file *file)
-{
-	struct ttusb *ttusb = file->private_data;
-	int addr;
-
-	for (addr = 0; addr < 8192; addr += 16) {
-		u8 snd_buf[2] = { addr >> 8, addr & 0xFF };
-		ttusb_i2c_msg(ttusb, 0x50, snd_buf, 2, stc_firmware + addr,
-			      16);
-	}
-
-	return 0;
-}
-
-static ssize_t stc_read(struct file *file, char *buf, size_t count,
-		 loff_t *offset)
-{
-	return simple_read_from_buffer(buf, count, offset, stc_firmware, 8192);
-}
-
-static int stc_release(struct inode *inode, struct file *file)
-{
-	return 0;
-}
-
-static const struct file_operations stc_fops = {
-	.owner = THIS_MODULE,
-	.read = stc_read,
-	.open = stc_open,
-	.release = stc_release,
-};
-#endif
-
-static u32 functionality(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-
-
-static int alps_tdmb7_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv;
-	u8 data[4];
-	struct i2c_msg msg = {.addr=0x61, .flags=0, .buf=data, .len=sizeof(data) };
-	u32 div;
-
-	div = (p->frequency + 36166667) / 166667;
-
-	data[0] = (div >> 8) & 0x7f;
-	data[1] = div & 0xff;
-	data[2] = ((div >> 10) & 0x60) | 0x85;
-	data[3] = p->frequency < 592000000 ? 0x40 : 0x80;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&ttusb->i2c_adap, &msg, 1) != 1) return -EIO;
-	return 0;
-}
-
-static struct cx22700_config alps_tdmb7_config = {
-	.demod_address = 0x43,
-};
-
-
-
-
-
-static int philips_tdm1316l_tuner_init(struct dvb_frontend* fe)
-{
-	struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv;
-	static u8 td1316_init[] = { 0x0b, 0xf5, 0x85, 0xab };
-	static u8 disable_mc44BC374c[] = { 0x1d, 0x74, 0xa0, 0x68 };
-	struct i2c_msg tuner_msg = { .addr=0x60, .flags=0, .buf=td1316_init, .len=sizeof(td1316_init) };
-
-	// setup PLL configuration
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) return -EIO;
-	msleep(1);
-
-	// disable the mc44BC374c (do not check for errors)
-	tuner_msg.addr = 0x65;
-	tuner_msg.buf = disable_mc44BC374c;
-	tuner_msg.len = sizeof(disable_mc44BC374c);
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) {
-		i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1);
-	}
-
-	return 0;
-}
-
-static int philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv;
-	u8 tuner_buf[4];
-	struct i2c_msg tuner_msg = {.addr=0x60, .flags=0, .buf=tuner_buf, .len=sizeof(tuner_buf) };
-	int tuner_frequency = 0;
-	u8 band, cp, filter;
-
-	// determine charge pump
-	tuner_frequency = p->frequency + 36130000;
-	if (tuner_frequency < 87000000) return -EINVAL;
-	else if (tuner_frequency < 130000000) cp = 3;
-	else if (tuner_frequency < 160000000) cp = 5;
-	else if (tuner_frequency < 200000000) cp = 6;
-	else if (tuner_frequency < 290000000) cp = 3;
-	else if (tuner_frequency < 420000000) cp = 5;
-	else if (tuner_frequency < 480000000) cp = 6;
-	else if (tuner_frequency < 620000000) cp = 3;
-	else if (tuner_frequency < 830000000) cp = 5;
-	else if (tuner_frequency < 895000000) cp = 7;
-	else return -EINVAL;
-
-	// determine band
-	if (p->frequency < 49000000)
-		return -EINVAL;
-	else if (p->frequency < 159000000)
-		band = 1;
-	else if (p->frequency < 444000000)
-		band = 2;
-	else if (p->frequency < 861000000)
-		band = 4;
-	else return -EINVAL;
-
-	// setup PLL filter
-	switch (p->bandwidth_hz) {
-	case 6000000:
-		tda1004x_writereg(fe, 0x0C, 0);
-		filter = 0;
-		break;
-
-	case 7000000:
-		tda1004x_writereg(fe, 0x0C, 0);
-		filter = 0;
-		break;
-
-	case 8000000:
-		tda1004x_writereg(fe, 0x0C, 0xFF);
-		filter = 1;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	// calculate divisor
-	// ((36130000+((1000000/6)/2)) + Finput)/(1000000/6)
-	tuner_frequency = (((p->frequency / 1000) * 6) + 217280) / 1000;
-
-	// setup tuner buffer
-	tuner_buf[0] = tuner_frequency >> 8;
-	tuner_buf[1] = tuner_frequency & 0xff;
-	tuner_buf[2] = 0xca;
-	tuner_buf[3] = (cp << 5) | (filter << 3) | band;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1)
-		return -EIO;
-
-	msleep(1);
-	return 0;
-}
-
-static int philips_tdm1316l_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
-{
-	struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv;
-
-	return request_firmware(fw, name, &ttusb->dev->dev);
-}
-
-static struct tda1004x_config philips_tdm1316l_config = {
-
-	.demod_address = 0x8,
-	.invert = 1,
-	.invert_oclk = 0,
-	.request_firmware = philips_tdm1316l_request_firmware,
-};
-
-static u8 alps_bsbe1_inittab[] = {
-	0x01, 0x15,
-	0x02, 0x30,
-	0x03, 0x00,
-	0x04, 0x7d,             /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
-	0x05, 0x35,             /* I2CT = 0, SCLT = 1, SDAT = 1 */
-	0x06, 0x40,             /* DAC not used, set to high impendance mode */
-	0x07, 0x00,             /* DAC LSB */
-	0x08, 0x40,             /* DiSEqC off, LNB power on OP2/LOCK pin on */
-	0x09, 0x00,             /* FIFO */
-	0x0c, 0x51,             /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
-	0x0d, 0x82,             /* DC offset compensation = ON, beta_agc1 = 2 */
-	0x0e, 0x23,             /* alpha_tmg = 2, beta_tmg = 3 */
-	0x10, 0x3f,             // AGC2  0x3d
-	0x11, 0x84,
-	0x12, 0xb9,
-	0x15, 0xc9,             // lock detector threshold
-	0x16, 0x00,
-	0x17, 0x00,
-	0x18, 0x00,
-	0x19, 0x00,
-	0x1a, 0x00,
-	0x1f, 0x50,
-	0x20, 0x00,
-	0x21, 0x00,
-	0x22, 0x00,
-	0x23, 0x00,
-	0x28, 0x00,             // out imp: normal  out type: parallel FEC mode:0
-	0x29, 0x1e,             // 1/2 threshold
-	0x2a, 0x14,             // 2/3 threshold
-	0x2b, 0x0f,             // 3/4 threshold
-	0x2c, 0x09,             // 5/6 threshold
-	0x2d, 0x05,             // 7/8 threshold
-	0x2e, 0x01,
-	0x31, 0x1f,             // test all FECs
-	0x32, 0x19,             // viterbi and synchro search
-	0x33, 0xfc,             // rs control
-	0x34, 0x93,             // error control
-	0x0f, 0x92,
-	0xff, 0xff
-};
-
-static u8 alps_bsru6_inittab[] = {
-	0x01, 0x15,
-	0x02, 0x30,
-	0x03, 0x00,
-	0x04, 0x7d,		/* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
-	0x05, 0x35,		/* I2CT = 0, SCLT = 1, SDAT = 1 */
-	0x06, 0x40,		/* DAC not used, set to high impendance mode */
-	0x07, 0x00,		/* DAC LSB */
-	0x08, 0x40,		/* DiSEqC off, LNB power on OP2/LOCK pin on */
-	0x09, 0x00,		/* FIFO */
-	0x0c, 0x51,		/* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
-	0x0d, 0x82,		/* DC offset compensation = ON, beta_agc1 = 2 */
-	0x0e, 0x23,		/* alpha_tmg = 2, beta_tmg = 3 */
-	0x10, 0x3f,		// AGC2  0x3d
-	0x11, 0x84,
-	0x12, 0xb9,
-	0x15, 0xc9,		// lock detector threshold
-	0x16, 0x00,
-	0x17, 0x00,
-	0x18, 0x00,
-	0x19, 0x00,
-	0x1a, 0x00,
-	0x1f, 0x50,
-	0x20, 0x00,
-	0x21, 0x00,
-	0x22, 0x00,
-	0x23, 0x00,
-	0x28, 0x00,		// out imp: normal  out type: parallel FEC mode:0
-	0x29, 0x1e,		// 1/2 threshold
-	0x2a, 0x14,		// 2/3 threshold
-	0x2b, 0x0f,		// 3/4 threshold
-	0x2c, 0x09,		// 5/6 threshold
-	0x2d, 0x05,		// 7/8 threshold
-	0x2e, 0x01,
-	0x31, 0x1f,		// test all FECs
-	0x32, 0x19,		// viterbi and synchro search
-	0x33, 0xfc,		// rs control
-	0x34, 0x93,		// error control
-	0x0f, 0x52,
-	0xff, 0xff
-};
-
-static int alps_stv0299_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
-{
-	u8 aclk = 0;
-	u8 bclk = 0;
-
-	if (srate < 1500000) {
-		aclk = 0xb7;
-		bclk = 0x47;
-	} else if (srate < 3000000) {
-		aclk = 0xb7;
-		bclk = 0x4b;
-	} else if (srate < 7000000) {
-		aclk = 0xb7;
-		bclk = 0x4f;
-	} else if (srate < 14000000) {
-		aclk = 0xb7;
-		bclk = 0x53;
-	} else if (srate < 30000000) {
-		aclk = 0xb6;
-		bclk = 0x53;
-	} else if (srate < 45000000) {
-		aclk = 0xb4;
-		bclk = 0x51;
-	}
-
-	stv0299_writereg(fe, 0x13, aclk);
-	stv0299_writereg(fe, 0x14, bclk);
-	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
-	stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
-	stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
-
-	return 0;
-}
-
-static int philips_tsa5059_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv;
-	u8 buf[4];
-	u32 div;
-	struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
-
-	if ((p->frequency < 950000) || (p->frequency > 2150000))
-		return -EINVAL;
-
-	div = (p->frequency + (125 - 1)) / 125;	/* round correctly */
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = div & 0xff;
-	buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
-	buf[3] = 0xC4;
-
-	if (p->frequency > 1530000)
-		buf[3] = 0xC0;
-
-	/* BSBE1 wants XCE bit set */
-	if (ttusb->revision == TTUSB_REV_2_2)
-		buf[3] |= 0x20;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&ttusb->i2c_adap, &msg, 1) != 1)
-		return -EIO;
-
-	return 0;
-}
-
-static struct stv0299_config alps_stv0299_config = {
-	.demod_address = 0x68,
-	.inittab = alps_bsru6_inittab,
-	.mclk = 88000000UL,
-	.invert = 1,
-	.skip_reinit = 0,
-	.lock_output = STV0299_LOCKOUTPUT_1,
-	.volt13_op0_op1 = STV0299_VOLT13_OP1,
-	.min_delay_ms = 100,
-	.set_symbol_rate = alps_stv0299_set_symbol_rate,
-};
-
-static int ttusb_novas_grundig_29504_491_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv;
-	u8 buf[4];
-	u32 div;
-	struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
-
-	div = p->frequency / 125;
-
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = div & 0xff;
-	buf[2] = 0x8e;
-	buf[3] = 0x00;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&ttusb->i2c_adap, &msg, 1) != 1)
-		return -EIO;
-
-	return 0;
-}
-
-static struct tda8083_config ttusb_novas_grundig_29504_491_config = {
-
-	.demod_address = 0x68,
-};
-
-static int alps_tdbe2_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct ttusb* ttusb = fe->dvb->priv;
-	u32 div;
-	u8 data[4];
-	struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) };
-
-	div = (p->frequency + 35937500 + 31250) / 62500;
-
-	data[0] = (div >> 8) & 0x7f;
-	data[1] = div & 0xff;
-	data[2] = 0x85 | ((div >> 10) & 0x60);
-	data[3] = (p->frequency < 174000000 ? 0x88 : p->frequency < 470000000 ? 0x84 : 0x81);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer (&ttusb->i2c_adap, &msg, 1) != 1)
-		return -EIO;
-
-	return 0;
-}
-
-
-static struct ves1820_config alps_tdbe2_config = {
-	.demod_address = 0x09,
-	.xin = 57840000UL,
-	.invert = 1,
-	.selagc = VES1820_SELAGC_SIGNAMPERR,
-};
-
-static u8 read_pwm(struct ttusb* ttusb)
-{
-	u8 b = 0xff;
-	u8 pwm;
-	struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
-				{ .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };
-
-	if ((i2c_transfer(&ttusb->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
-		pwm = 0x48;
-
-	return pwm;
-}
-
-
-static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct ttusb *ttusb = (struct ttusb *) fe->dvb->priv;
-	u8 tuner_buf[5];
-	struct i2c_msg tuner_msg = {.addr = 0x60,
-				    .flags = 0,
-				    .buf = tuner_buf,
-				    .len = sizeof(tuner_buf) };
-	int tuner_frequency = 0;
-	u8 band, cp, filter;
-
-	// determine charge pump
-	tuner_frequency = p->frequency;
-	if      (tuner_frequency <  87000000) {return -EINVAL;}
-	else if (tuner_frequency < 130000000) {cp = 3; band = 1;}
-	else if (tuner_frequency < 160000000) {cp = 5; band = 1;}
-	else if (tuner_frequency < 200000000) {cp = 6; band = 1;}
-	else if (tuner_frequency < 290000000) {cp = 3; band = 2;}
-	else if (tuner_frequency < 420000000) {cp = 5; band = 2;}
-	else if (tuner_frequency < 480000000) {cp = 6; band = 2;}
-	else if (tuner_frequency < 620000000) {cp = 3; band = 4;}
-	else if (tuner_frequency < 830000000) {cp = 5; band = 4;}
-	else if (tuner_frequency < 895000000) {cp = 7; band = 4;}
-	else {return -EINVAL;}
-
-	// assume PLL filter should always be 8MHz for the moment.
-	filter = 1;
-
-	// calculate divisor
-	// (Finput + Fif)/Fref; Fif = 36125000 Hz, Fref = 62500 Hz
-	tuner_frequency = ((p->frequency + 36125000) / 62500);
-
-	// setup tuner buffer
-	tuner_buf[0] = tuner_frequency >> 8;
-	tuner_buf[1] = tuner_frequency & 0xff;
-	tuner_buf[2] = 0xc8;
-	tuner_buf[3] = (cp << 5) | (filter << 3) | band;
-	tuner_buf[4] = 0x80;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) {
-		printk("dvb-ttusb-budget: dvbc_philips_tdm1316l_pll_set Error 1\n");
-		return -EIO;
-	}
-
-	msleep(50);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) {
-		printk("dvb-ttusb-budget: dvbc_philips_tdm1316l_pll_set Error 2\n");
-		return -EIO;
-	}
-
-	msleep(1);
-
-	return 0;
-}
-
-static u8 dvbc_philips_tdm1316l_inittab[] = {
-	0x80, 0x21,
-	0x80, 0x20,
-	0x81, 0x01,
-	0x81, 0x00,
-	0x00, 0x09,
-	0x01, 0x69,
-	0x03, 0x00,
-	0x04, 0x00,
-	0x07, 0x00,
-	0x08, 0x00,
-	0x20, 0x00,
-	0x21, 0x40,
-	0x22, 0x00,
-	0x23, 0x00,
-	0x24, 0x40,
-	0x25, 0x88,
-	0x30, 0xff,
-	0x31, 0x00,
-	0x32, 0xff,
-	0x33, 0x00,
-	0x34, 0x50,
-	0x35, 0x7f,
-	0x36, 0x00,
-	0x37, 0x20,
-	0x38, 0x00,
-	0x40, 0x1c,
-	0x41, 0xff,
-	0x42, 0x29,
-	0x43, 0x20,
-	0x44, 0xff,
-	0x45, 0x00,
-	0x46, 0x00,
-	0x49, 0x04,
-	0x4a, 0xff,
-	0x4b, 0x7f,
-	0x52, 0x30,
-	0x55, 0xae,
-	0x56, 0x47,
-	0x57, 0xe1,
-	0x58, 0x3a,
-	0x5a, 0x1e,
-	0x5b, 0x34,
-	0x60, 0x00,
-	0x63, 0x00,
-	0x64, 0x00,
-	0x65, 0x00,
-	0x66, 0x00,
-	0x67, 0x00,
-	0x68, 0x00,
-	0x69, 0x00,
-	0x6a, 0x02,
-	0x6b, 0x00,
-	0x70, 0xff,
-	0x71, 0x00,
-	0x72, 0x00,
-	0x73, 0x00,
-	0x74, 0x0c,
-	0x80, 0x00,
-	0x81, 0x00,
-	0x82, 0x00,
-	0x83, 0x00,
-	0x84, 0x04,
-	0x85, 0x80,
-	0x86, 0x24,
-	0x87, 0x78,
-	0x88, 0x00,
-	0x89, 0x00,
-	0x90, 0x01,
-	0x91, 0x01,
-	0xa0, 0x00,
-	0xa1, 0x00,
-	0xa2, 0x00,
-	0xb0, 0x91,
-	0xb1, 0x0b,
-	0xc0, 0x4b,
-	0xc1, 0x00,
-	0xc2, 0x00,
-	0xd0, 0x00,
-	0xd1, 0x00,
-	0xd2, 0x00,
-	0xd3, 0x00,
-	0xd4, 0x00,
-	0xd5, 0x00,
-	0xde, 0x00,
-	0xdf, 0x00,
-	0x61, 0x38,
-	0x62, 0x0a,
-	0x53, 0x13,
-	0x59, 0x08,
-	0x55, 0x00,
-	0x56, 0x40,
-	0x57, 0x08,
-	0x58, 0x3d,
-	0x88, 0x10,
-	0xa0, 0x00,
-	0xa0, 0x00,
-	0xa0, 0x00,
-	0xa0, 0x04,
-	0xff, 0xff,
-};
-
-static struct stv0297_config dvbc_philips_tdm1316l_config = {
-	.demod_address = 0x1c,
-	.inittab = dvbc_philips_tdm1316l_inittab,
-	.invert = 0,
-};
-
-static void frontend_init(struct ttusb* ttusb)
-{
-	switch(le16_to_cpu(ttusb->dev->descriptor.idProduct)) {
-	case 0x1003: // Hauppauge/TT Nova-USB-S budget (stv0299/ALPS BSRU6|BSBE1(tsa5059))
-		// try the stv0299 based first
-		ttusb->fe = dvb_attach(stv0299_attach, &alps_stv0299_config, &ttusb->i2c_adap);
-		if (ttusb->fe != NULL) {
-			ttusb->fe->ops.tuner_ops.set_params = philips_tsa5059_tuner_set_params;
-
-			if(ttusb->revision == TTUSB_REV_2_2) { // ALPS BSBE1
-				alps_stv0299_config.inittab = alps_bsbe1_inittab;
-				dvb_attach(lnbp21_attach, ttusb->fe, &ttusb->i2c_adap, 0, 0);
-			} else { // ALPS BSRU6
-				ttusb->fe->ops.set_voltage = ttusb_set_voltage;
-			}
-			break;
-		}
-
-		// Grundig 29504-491
-		ttusb->fe = dvb_attach(tda8083_attach, &ttusb_novas_grundig_29504_491_config, &ttusb->i2c_adap);
-		if (ttusb->fe != NULL) {
-			ttusb->fe->ops.tuner_ops.set_params = ttusb_novas_grundig_29504_491_tuner_set_params;
-			ttusb->fe->ops.set_voltage = ttusb_set_voltage;
-			break;
-		}
-		break;
-
-	case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659))
-		ttusb->fe = dvb_attach(ves1820_attach, &alps_tdbe2_config, &ttusb->i2c_adap, read_pwm(ttusb));
-		if (ttusb->fe != NULL) {
-			ttusb->fe->ops.tuner_ops.set_params = alps_tdbe2_tuner_set_params;
-			break;
-		}
-
-		ttusb->fe = dvb_attach(stv0297_attach, &dvbc_philips_tdm1316l_config, &ttusb->i2c_adap);
-		if (ttusb->fe != NULL) {
-			ttusb->fe->ops.tuner_ops.set_params = dvbc_philips_tdm1316l_tuner_set_params;
-			break;
-		}
-		break;
-
-	case 0x1005: // Hauppauge/TT Nova-USB-t budget (tda10046/Philips td1316(tda6651tt) OR cx22700/ALPS TDMB7(??))
-		// try the ALPS TDMB7 first
-		ttusb->fe = dvb_attach(cx22700_attach, &alps_tdmb7_config, &ttusb->i2c_adap);
-		if (ttusb->fe != NULL) {
-			ttusb->fe->ops.tuner_ops.set_params = alps_tdmb7_tuner_set_params;
-			break;
-		}
-
-		// Philips td1316
-		ttusb->fe = dvb_attach(tda10046_attach, &philips_tdm1316l_config, &ttusb->i2c_adap);
-		if (ttusb->fe != NULL) {
-			ttusb->fe->ops.tuner_ops.init = philips_tdm1316l_tuner_init;
-			ttusb->fe->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params;
-			break;
-		}
-		break;
-	}
-
-	if (ttusb->fe == NULL) {
-		printk("dvb-ttusb-budget: A frontend driver was not found for device [%04x:%04x]\n",
-		       le16_to_cpu(ttusb->dev->descriptor.idVendor),
-		       le16_to_cpu(ttusb->dev->descriptor.idProduct));
-	} else {
-		if (dvb_register_frontend(&ttusb->adapter, ttusb->fe)) {
-			printk("dvb-ttusb-budget: Frontend registration failed!\n");
-			dvb_frontend_detach(ttusb->fe);
-			ttusb->fe = NULL;
-		}
-	}
-}
-
-
-
-static struct i2c_algorithm ttusb_dec_algo = {
-	.master_xfer	= master_xfer,
-	.functionality	= functionality,
-};
-
-static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
-	struct usb_device *udev;
-	struct ttusb *ttusb;
-	int result;
-
-	dprintk("%s: TTUSB DVB connected\n", __func__);
-
-	udev = interface_to_usbdev(intf);
-
-	if (intf->altsetting->desc.bInterfaceNumber != 1) return -ENODEV;
-
-	if (!(ttusb = kzalloc(sizeof(struct ttusb), GFP_KERNEL)))
-		return -ENOMEM;
-
-	ttusb->dev = udev;
-	ttusb->c = 0;
-	ttusb->mux_state = 0;
-	mutex_init(&ttusb->semi2c);
-
-	mutex_lock(&ttusb->semi2c);
-
-	mutex_init(&ttusb->semusb);
-
-	ttusb_setup_interfaces(ttusb);
-
-	result = ttusb_alloc_iso_urbs(ttusb);
-	if (result < 0) {
-		dprintk("%s: ttusb_alloc_iso_urbs - failed\n", __func__);
-		mutex_unlock(&ttusb->semi2c);
-		kfree(ttusb);
-		return result;
-	}
-
-	if (ttusb_init_controller(ttusb))
-		printk("ttusb_init_controller: error\n");
-
-	mutex_unlock(&ttusb->semi2c);
-
-	result = dvb_register_adapter(&ttusb->adapter,
-				      "Technotrend/Hauppauge Nova-USB",
-				      THIS_MODULE, &udev->dev, adapter_nr);
-	if (result < 0) {
-		ttusb_free_iso_urbs(ttusb);
-		kfree(ttusb);
-		return result;
-	}
-	ttusb->adapter.priv = ttusb;
-
-	/* i2c */
-	memset(&ttusb->i2c_adap, 0, sizeof(struct i2c_adapter));
-	strcpy(ttusb->i2c_adap.name, "TTUSB DEC");
-
-	i2c_set_adapdata(&ttusb->i2c_adap, ttusb);
-
-	ttusb->i2c_adap.algo              = &ttusb_dec_algo;
-	ttusb->i2c_adap.algo_data         = NULL;
-	ttusb->i2c_adap.dev.parent	  = &udev->dev;
-
-	result = i2c_add_adapter(&ttusb->i2c_adap);
-	if (result)
-		goto err_unregister_adapter;
-
-	memset(&ttusb->dvb_demux, 0, sizeof(ttusb->dvb_demux));
-
-	ttusb->dvb_demux.dmx.capabilities =
-	    DMX_TS_FILTERING | DMX_SECTION_FILTERING;
-	ttusb->dvb_demux.priv = NULL;
-#ifdef TTUSB_HWSECTIONS
-	ttusb->dvb_demux.filternum = TTUSB_MAXFILTER;
-#else
-	ttusb->dvb_demux.filternum = 32;
-#endif
-	ttusb->dvb_demux.feednum = TTUSB_MAXCHANNEL;
-	ttusb->dvb_demux.start_feed = ttusb_start_feed;
-	ttusb->dvb_demux.stop_feed = ttusb_stop_feed;
-	ttusb->dvb_demux.write_to_decoder = NULL;
-
-	result = dvb_dmx_init(&ttusb->dvb_demux);
-	if (result < 0) {
-		printk("ttusb_dvb: dvb_dmx_init failed (errno = %d)\n", result);
-		result = -ENODEV;
-		goto err_i2c_del_adapter;
-	}
-//FIXME dmxdev (nur WAS?)
-	ttusb->dmxdev.filternum = ttusb->dvb_demux.filternum;
-	ttusb->dmxdev.demux = &ttusb->dvb_demux.dmx;
-	ttusb->dmxdev.capabilities = 0;
-
-	result = dvb_dmxdev_init(&ttusb->dmxdev, &ttusb->adapter);
-	if (result < 0) {
-		printk("ttusb_dvb: dvb_dmxdev_init failed (errno = %d)\n",
-		       result);
-		result = -ENODEV;
-		goto err_release_dmx;
-	}
-
-	if (dvb_net_init(&ttusb->adapter, &ttusb->dvbnet, &ttusb->dvb_demux.dmx)) {
-		printk("ttusb_dvb: dvb_net_init failed!\n");
-		result = -ENODEV;
-		goto err_release_dmxdev;
-	}
-
-	usb_set_intfdata(intf, (void *) ttusb);
-
-	frontend_init(ttusb);
-
-	return 0;
-
-err_release_dmxdev:
-	dvb_dmxdev_release(&ttusb->dmxdev);
-err_release_dmx:
-	dvb_dmx_release(&ttusb->dvb_demux);
-err_i2c_del_adapter:
-	i2c_del_adapter(&ttusb->i2c_adap);
-err_unregister_adapter:
-	dvb_unregister_adapter (&ttusb->adapter);
-	return result;
-}
-
-static void ttusb_disconnect(struct usb_interface *intf)
-{
-	struct ttusb *ttusb = usb_get_intfdata(intf);
-
-	usb_set_intfdata(intf, NULL);
-
-	ttusb->disconnecting = 1;
-
-	ttusb_stop_iso_xfer(ttusb);
-
-	ttusb->dvb_demux.dmx.close(&ttusb->dvb_demux.dmx);
-	dvb_net_release(&ttusb->dvbnet);
-	dvb_dmxdev_release(&ttusb->dmxdev);
-	dvb_dmx_release(&ttusb->dvb_demux);
-	if (ttusb->fe != NULL) {
-		dvb_unregister_frontend(ttusb->fe);
-		dvb_frontend_detach(ttusb->fe);
-	}
-	i2c_del_adapter(&ttusb->i2c_adap);
-	dvb_unregister_adapter(&ttusb->adapter);
-
-	ttusb_free_iso_urbs(ttusb);
-
-	kfree(ttusb);
-
-	dprintk("%s: TTUSB DVB disconnected\n", __func__);
-}
-
-static struct usb_device_id ttusb_table[] = {
-	{USB_DEVICE(0xb48, 0x1003)},
-	{USB_DEVICE(0xb48, 0x1004)},
-	{USB_DEVICE(0xb48, 0x1005)},
-	{}
-};
-
-MODULE_DEVICE_TABLE(usb, ttusb_table);
-
-static struct usb_driver ttusb_driver = {
-      .name		= "ttusb",
-      .probe		= ttusb_probe,
-      .disconnect	= ttusb_disconnect,
-      .id_table		= ttusb_table,
-};
-
-module_usb_driver(ttusb_driver);
-
-MODULE_AUTHOR("Holger Waechtler <holger@convergence.de>");
-MODULE_DESCRIPTION("TTUSB DVB Driver");
-MODULE_LICENSE("GPL");
-MODULE_FIRMWARE("ttusb-budget/dspbootcode.bin");
diff --git a/drivers/media/dvb/ttusb-dec/Kconfig b/drivers/media/dvb/ttusb-dec/Kconfig
deleted file mode 100644
index 290254a..0000000
--- a/drivers/media/dvb/ttusb-dec/Kconfig
+++ /dev/null
@@ -1,21 +0,0 @@
-config DVB_TTUSB_DEC
-	tristate "Technotrend/Hauppauge USB DEC devices"
-	depends on DVB_CORE && USB && INPUT && PCI
-	select CRC32
-	help
-	  Support for external USB adapters designed by Technotrend and
-	  produced by Hauppauge, shipped under the brand name 'DEC2000-t'
-	  and 'DEC3000-s'.
-
-	  Even if these devices have a MPEG decoder built in, they transmit
-	  only compressed MPEG data over the USB bus, so you need
-	  an external software decoder to watch TV on your computer.
-
-	  This driver needs external firmware. Please use the commands
-	  "<kerneldir>/Documentation/dvb/get_dvb_firmware dec2000t",
-	  "<kerneldir>/Documentation/dvb/get_dvb_firmware dec2540t",
-	  "<kerneldir>/Documentation/dvb/get_dvb_firmware dec3000s",
-	  download/extract them, and then copy them to /usr/lib/hotplug/firmware
-	  or /lib/firmware (depending on configuration of firmware hotplug).
-
-	  Say Y if you own such a device and want to use it.
diff --git a/drivers/media/dvb/ttusb-dec/Makefile b/drivers/media/dvb/ttusb-dec/Makefile
deleted file mode 100644
index ed28b53..0000000
--- a/drivers/media/dvb/ttusb-dec/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-$(CONFIG_DVB_TTUSB_DEC) += ttusb_dec.o ttusbdecfe.o
-
-ccflags-y += -Idrivers/media/dvb/dvb-core/
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
deleted file mode 100644
index 504c812..0000000
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ /dev/null
@@ -1,1764 +0,0 @@
-/*
- * TTUSB DEC Driver
- *
- * Copyright (C) 2003-2004 Alex Woods <linux-dvb@giblets.org>
- * IR support by Peter Beutner <p.beutner@gmx.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/usb.h>
-#include <linux/interrupt.h>
-#include <linux/firmware.h>
-#include <linux/crc32.h>
-#include <linux/init.h>
-#include <linux/input.h>
-
-#include <linux/mutex.h>
-
-#include "dmxdev.h"
-#include "dvb_demux.h"
-#include "dvb_filter.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-#include "ttusbdecfe.h"
-
-static int debug;
-static int output_pva;
-static int enable_rc;
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
-module_param(output_pva, int, 0444);
-MODULE_PARM_DESC(output_pva, "Output PVA from dvr device (default:off)");
-module_param(enable_rc, int, 0644);
-MODULE_PARM_DESC(enable_rc, "Turn on/off IR remote control(default: off)");
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-#define dprintk	if (debug) printk
-
-#define DRIVER_NAME		"TechnoTrend/Hauppauge DEC USB"
-
-#define COMMAND_PIPE		0x03
-#define RESULT_PIPE		0x04
-#define IN_PIPE			0x08
-#define OUT_PIPE		0x07
-#define IRQ_PIPE		0x0A
-
-#define COMMAND_PACKET_SIZE	0x3c
-#define ARM_PACKET_SIZE		0x1000
-#define IRQ_PACKET_SIZE		0x8
-
-#define ISO_BUF_COUNT		0x04
-#define FRAMES_PER_ISO_BUF	0x04
-#define ISO_FRAME_SIZE		0x0380
-
-#define	MAX_PVA_LENGTH		6144
-
-enum ttusb_dec_model {
-	TTUSB_DEC2000T,
-	TTUSB_DEC2540T,
-	TTUSB_DEC3000S
-};
-
-enum ttusb_dec_packet_type {
-	TTUSB_DEC_PACKET_PVA,
-	TTUSB_DEC_PACKET_SECTION,
-	TTUSB_DEC_PACKET_EMPTY
-};
-
-enum ttusb_dec_interface {
-	TTUSB_DEC_INTERFACE_INITIAL,
-	TTUSB_DEC_INTERFACE_IN,
-	TTUSB_DEC_INTERFACE_OUT
-};
-
-struct ttusb_dec {
-	enum ttusb_dec_model		model;
-	char				*model_name;
-	char				*firmware_name;
-	int				can_playback;
-
-	/* DVB bits */
-	struct dvb_adapter		adapter;
-	struct dmxdev			dmxdev;
-	struct dvb_demux		demux;
-	struct dmx_frontend		frontend;
-	struct dvb_net			dvb_net;
-	struct dvb_frontend*		fe;
-
-	u16			pid[DMX_PES_OTHER];
-
-	/* USB bits */
-	struct usb_device		*udev;
-	u8				trans_count;
-	unsigned int			command_pipe;
-	unsigned int			result_pipe;
-	unsigned int			in_pipe;
-	unsigned int			out_pipe;
-	unsigned int			irq_pipe;
-	enum ttusb_dec_interface	interface;
-	struct mutex			usb_mutex;
-
-	void			*irq_buffer;
-	struct urb		*irq_urb;
-	dma_addr_t		irq_dma_handle;
-	void			*iso_buffer;
-	dma_addr_t		iso_dma_handle;
-	struct urb		*iso_urb[ISO_BUF_COUNT];
-	int			iso_stream_count;
-	struct mutex		iso_mutex;
-
-	u8				packet[MAX_PVA_LENGTH + 4];
-	enum ttusb_dec_packet_type	packet_type;
-	int				packet_state;
-	int				packet_length;
-	int				packet_payload_length;
-	u16				next_packet_id;
-
-	int				pva_stream_count;
-	int				filter_stream_count;
-
-	struct dvb_filter_pes2ts	a_pes2ts;
-	struct dvb_filter_pes2ts	v_pes2ts;
-
-	u8			v_pes[16 + MAX_PVA_LENGTH];
-	int			v_pes_length;
-	int			v_pes_postbytes;
-
-	struct list_head	urb_frame_list;
-	struct tasklet_struct	urb_tasklet;
-	spinlock_t		urb_frame_list_lock;
-
-	struct dvb_demux_filter	*audio_filter;
-	struct dvb_demux_filter	*video_filter;
-	struct list_head	filter_info_list;
-	spinlock_t		filter_info_list_lock;
-
-	struct input_dev	*rc_input_dev;
-	char			rc_phys[64];
-
-	int			active; /* Loaded successfully */
-};
-
-struct urb_frame {
-	u8			data[ISO_FRAME_SIZE];
-	int			length;
-	struct list_head	urb_frame_list;
-};
-
-struct filter_info {
-	u8			stream_id;
-	struct dvb_demux_filter	*filter;
-	struct list_head	filter_info_list;
-};
-
-static u16 rc_keys[] = {
-	KEY_POWER,
-	KEY_MUTE,
-	KEY_1,
-	KEY_2,
-	KEY_3,
-	KEY_4,
-	KEY_5,
-	KEY_6,
-	KEY_7,
-	KEY_8,
-	KEY_9,
-	KEY_0,
-	KEY_CHANNELUP,
-	KEY_VOLUMEDOWN,
-	KEY_OK,
-	KEY_VOLUMEUP,
-	KEY_CHANNELDOWN,
-	KEY_PREVIOUS,
-	KEY_ESC,
-	KEY_RED,
-	KEY_GREEN,
-	KEY_YELLOW,
-	KEY_BLUE,
-	KEY_OPTION,
-	KEY_M,
-	KEY_RADIO
-};
-
-static void ttusb_dec_set_model(struct ttusb_dec *dec,
-				enum ttusb_dec_model model);
-
-static void ttusb_dec_handle_irq( struct urb *urb)
-{
-	struct ttusb_dec * dec = urb->context;
-	char *buffer = dec->irq_buffer;
-	int retval;
-
-	switch(urb->status) {
-		case 0: /*success*/
-			break;
-		case -ECONNRESET:
-		case -ENOENT:
-		case -ESHUTDOWN:
-		case -ETIME:
-			/* this urb is dead, cleanup */
-			dprintk("%s:urb shutting down with status: %d\n",
-					__func__, urb->status);
-			return;
-		default:
-			dprintk("%s:nonzero status received: %d\n",
-					__func__,urb->status);
-			goto exit;
-	}
-
-	if( (buffer[0] == 0x1) && (buffer[2] == 0x15) )  {
-		/* IR - Event */
-		/* this is an fact a bit too simple implementation;
-		 * the box also reports a keyrepeat signal
-		 * (with buffer[3] == 0x40) in an intervall of ~100ms.
-		 * But to handle this correctly we had to imlemenent some
-		 * kind of timer which signals a 'key up' event if no
-		 * keyrepeat signal is received for lets say 200ms.
-		 * this should/could be added later ...
-		 * for now lets report each signal as a key down and up*/
-		dprintk("%s:rc signal:%d\n", __func__, buffer[4]);
-		input_report_key(dec->rc_input_dev, rc_keys[buffer[4] - 1], 1);
-		input_sync(dec->rc_input_dev);
-		input_report_key(dec->rc_input_dev, rc_keys[buffer[4] - 1], 0);
-		input_sync(dec->rc_input_dev);
-	}
-
-exit:	retval = usb_submit_urb(urb, GFP_ATOMIC);
-	if(retval)
-		printk("%s - usb_commit_urb failed with result: %d\n",
-			__func__, retval);
-}
-
-static u16 crc16(u16 crc, const u8 *buf, size_t len)
-{
-	u16 tmp;
-
-	while (len--) {
-		crc ^= *buf++;
-		crc ^= (u8)crc >> 4;
-		tmp = (u8)crc;
-		crc ^= (tmp ^ (tmp << 1)) << 4;
-	}
-	return crc;
-}
-
-static int ttusb_dec_send_command(struct ttusb_dec *dec, const u8 command,
-				  int param_length, const u8 params[],
-				  int *result_length, u8 cmd_result[])
-{
-	int result, actual_len, i;
-	u8 *b;
-
-	dprintk("%s\n", __func__);
-
-	b = kmalloc(COMMAND_PACKET_SIZE + 4, GFP_KERNEL);
-	if (!b)
-		return -ENOMEM;
-
-	if ((result = mutex_lock_interruptible(&dec->usb_mutex))) {
-		kfree(b);
-		printk("%s: Failed to lock usb mutex.\n", __func__);
-		return result;
-	}
-
-	b[0] = 0xaa;
-	b[1] = ++dec->trans_count;
-	b[2] = command;
-	b[3] = param_length;
-
-	if (params)
-		memcpy(&b[4], params, param_length);
-
-	if (debug) {
-		printk("%s: command: ", __func__);
-		for (i = 0; i < param_length + 4; i++)
-			printk("0x%02X ", b[i]);
-		printk("\n");
-	}
-
-	result = usb_bulk_msg(dec->udev, dec->command_pipe, b,
-			      COMMAND_PACKET_SIZE + 4, &actual_len, 1000);
-
-	if (result) {
-		printk("%s: command bulk message failed: error %d\n",
-		       __func__, result);
-		mutex_unlock(&dec->usb_mutex);
-		kfree(b);
-		return result;
-	}
-
-	result = usb_bulk_msg(dec->udev, dec->result_pipe, b,
-			      COMMAND_PACKET_SIZE + 4, &actual_len, 1000);
-
-	if (result) {
-		printk("%s: result bulk message failed: error %d\n",
-		       __func__, result);
-		mutex_unlock(&dec->usb_mutex);
-		kfree(b);
-		return result;
-	} else {
-		if (debug) {
-			printk("%s: result: ", __func__);
-			for (i = 0; i < actual_len; i++)
-				printk("0x%02X ", b[i]);
-			printk("\n");
-		}
-
-		if (result_length)
-			*result_length = b[3];
-		if (cmd_result && b[3] > 0)
-			memcpy(cmd_result, &b[4], b[3]);
-
-		mutex_unlock(&dec->usb_mutex);
-
-		kfree(b);
-		return 0;
-	}
-}
-
-static int ttusb_dec_get_stb_state (struct ttusb_dec *dec, unsigned int *mode,
-				    unsigned int *model, unsigned int *version)
-{
-	u8 c[COMMAND_PACKET_SIZE];
-	int c_length;
-	int result;
-	__be32 tmp;
-
-	dprintk("%s\n", __func__);
-
-	result = ttusb_dec_send_command(dec, 0x08, 0, NULL, &c_length, c);
-	if (result)
-		return result;
-
-	if (c_length >= 0x0c) {
-		if (mode != NULL) {
-			memcpy(&tmp, c, 4);
-			*mode = ntohl(tmp);
-		}
-		if (model != NULL) {
-			memcpy(&tmp, &c[4], 4);
-			*model = ntohl(tmp);
-		}
-		if (version != NULL) {
-			memcpy(&tmp, &c[8], 4);
-			*version = ntohl(tmp);
-		}
-		return 0;
-	} else {
-		return -1;
-	}
-}
-
-static int ttusb_dec_audio_pes2ts_cb(void *priv, unsigned char *data)
-{
-	struct ttusb_dec *dec = priv;
-
-	dec->audio_filter->feed->cb.ts(data, 188, NULL, 0,
-				       &dec->audio_filter->feed->feed.ts,
-				       DMX_OK);
-
-	return 0;
-}
-
-static int ttusb_dec_video_pes2ts_cb(void *priv, unsigned char *data)
-{
-	struct ttusb_dec *dec = priv;
-
-	dec->video_filter->feed->cb.ts(data, 188, NULL, 0,
-				       &dec->video_filter->feed->feed.ts,
-				       DMX_OK);
-
-	return 0;
-}
-
-static void ttusb_dec_set_pids(struct ttusb_dec *dec)
-{
-	u8 b[] = { 0x00, 0x00, 0x00, 0x00,
-		   0x00, 0x00, 0xff, 0xff,
-		   0xff, 0xff, 0xff, 0xff };
-
-	__be16 pcr = htons(dec->pid[DMX_PES_PCR]);
-	__be16 audio = htons(dec->pid[DMX_PES_AUDIO]);
-	__be16 video = htons(dec->pid[DMX_PES_VIDEO]);
-
-	dprintk("%s\n", __func__);
-
-	memcpy(&b[0], &pcr, 2);
-	memcpy(&b[2], &audio, 2);
-	memcpy(&b[4], &video, 2);
-
-	ttusb_dec_send_command(dec, 0x50, sizeof(b), b, NULL, NULL);
-
-	dvb_filter_pes2ts_init(&dec->a_pes2ts, dec->pid[DMX_PES_AUDIO],
-			       ttusb_dec_audio_pes2ts_cb, dec);
-	dvb_filter_pes2ts_init(&dec->v_pes2ts, dec->pid[DMX_PES_VIDEO],
-			       ttusb_dec_video_pes2ts_cb, dec);
-	dec->v_pes_length = 0;
-	dec->v_pes_postbytes = 0;
-}
-
-static void ttusb_dec_process_pva(struct ttusb_dec *dec, u8 *pva, int length)
-{
-	if (length < 8) {
-		printk("%s: packet too short - discarding\n", __func__);
-		return;
-	}
-
-	if (length > 8 + MAX_PVA_LENGTH) {
-		printk("%s: packet too long - discarding\n", __func__);
-		return;
-	}
-
-	switch (pva[2]) {
-
-	case 0x01: {		/* VideoStream */
-		int prebytes = pva[5] & 0x03;
-		int postbytes = (pva[5] & 0x0c) >> 2;
-		__be16 v_pes_payload_length;
-
-		if (output_pva) {
-			dec->video_filter->feed->cb.ts(pva, length, NULL, 0,
-				&dec->video_filter->feed->feed.ts, DMX_OK);
-			return;
-		}
-
-		if (dec->v_pes_postbytes > 0 &&
-		    dec->v_pes_postbytes == prebytes) {
-			memcpy(&dec->v_pes[dec->v_pes_length],
-			       &pva[12], prebytes);
-
-			dvb_filter_pes2ts(&dec->v_pes2ts, dec->v_pes,
-					  dec->v_pes_length + prebytes, 1);
-		}
-
-		if (pva[5] & 0x10) {
-			dec->v_pes[7] = 0x80;
-			dec->v_pes[8] = 0x05;
-
-			dec->v_pes[9] = 0x21 | ((pva[8] & 0xc0) >> 5);
-			dec->v_pes[10] = ((pva[8] & 0x3f) << 2) |
-					 ((pva[9] & 0xc0) >> 6);
-			dec->v_pes[11] = 0x01 |
-					 ((pva[9] & 0x3f) << 2) |
-					 ((pva[10] & 0x80) >> 6);
-			dec->v_pes[12] = ((pva[10] & 0x7f) << 1) |
-					 ((pva[11] & 0xc0) >> 7);
-			dec->v_pes[13] = 0x01 | ((pva[11] & 0x7f) << 1);
-
-			memcpy(&dec->v_pes[14], &pva[12 + prebytes],
-			       length - 12 - prebytes);
-			dec->v_pes_length = 14 + length - 12 - prebytes;
-		} else {
-			dec->v_pes[7] = 0x00;
-			dec->v_pes[8] = 0x00;
-
-			memcpy(&dec->v_pes[9], &pva[8], length - 8);
-			dec->v_pes_length = 9 + length - 8;
-		}
-
-		dec->v_pes_postbytes = postbytes;
-
-		if (dec->v_pes[9 + dec->v_pes[8]] == 0x00 &&
-		    dec->v_pes[10 + dec->v_pes[8]] == 0x00 &&
-		    dec->v_pes[11 + dec->v_pes[8]] == 0x01)
-			dec->v_pes[6] = 0x84;
-		else
-			dec->v_pes[6] = 0x80;
-
-		v_pes_payload_length = htons(dec->v_pes_length - 6 +
-					     postbytes);
-		memcpy(&dec->v_pes[4], &v_pes_payload_length, 2);
-
-		if (postbytes == 0)
-			dvb_filter_pes2ts(&dec->v_pes2ts, dec->v_pes,
-					  dec->v_pes_length, 1);
-
-		break;
-	}
-
-	case 0x02:		/* MainAudioStream */
-		if (output_pva) {
-			dec->audio_filter->feed->cb.ts(pva, length, NULL, 0,
-				&dec->audio_filter->feed->feed.ts, DMX_OK);
-			return;
-		}
-
-		dvb_filter_pes2ts(&dec->a_pes2ts, &pva[8], length - 8,
-				  pva[5] & 0x10);
-		break;
-
-	default:
-		printk("%s: unknown PVA type: %02x.\n", __func__,
-		       pva[2]);
-		break;
-	}
-}
-
-static void ttusb_dec_process_filter(struct ttusb_dec *dec, u8 *packet,
-				     int length)
-{
-	struct list_head *item;
-	struct filter_info *finfo;
-	struct dvb_demux_filter *filter = NULL;
-	unsigned long flags;
-	u8 sid;
-
-	sid = packet[1];
-	spin_lock_irqsave(&dec->filter_info_list_lock, flags);
-	for (item = dec->filter_info_list.next; item != &dec->filter_info_list;
-	     item = item->next) {
-		finfo = list_entry(item, struct filter_info, filter_info_list);
-		if (finfo->stream_id == sid) {
-			filter = finfo->filter;
-			break;
-		}
-	}
-	spin_unlock_irqrestore(&dec->filter_info_list_lock, flags);
-
-	if (filter)
-		filter->feed->cb.sec(&packet[2], length - 2, NULL, 0,
-				     &filter->filter, DMX_OK);
-}
-
-static void ttusb_dec_process_packet(struct ttusb_dec *dec)
-{
-	int i;
-	u16 csum = 0;
-	u16 packet_id;
-
-	if (dec->packet_length % 2) {
-		printk("%s: odd sized packet - discarding\n", __func__);
-		return;
-	}
-
-	for (i = 0; i < dec->packet_length; i += 2)
-		csum ^= ((dec->packet[i] << 8) + dec->packet[i + 1]);
-
-	if (csum) {
-		printk("%s: checksum failed - discarding\n", __func__);
-		return;
-	}
-
-	packet_id = dec->packet[dec->packet_length - 4] << 8;
-	packet_id += dec->packet[dec->packet_length - 3];
-
-	if ((packet_id != dec->next_packet_id) && dec->next_packet_id) {
-		printk("%s: warning: lost packets between %u and %u\n",
-		       __func__, dec->next_packet_id - 1, packet_id);
-	}
-
-	if (packet_id == 0xffff)
-		dec->next_packet_id = 0x8000;
-	else
-		dec->next_packet_id = packet_id + 1;
-
-	switch (dec->packet_type) {
-	case TTUSB_DEC_PACKET_PVA:
-		if (dec->pva_stream_count)
-			ttusb_dec_process_pva(dec, dec->packet,
-					      dec->packet_payload_length);
-		break;
-
-	case TTUSB_DEC_PACKET_SECTION:
-		if (dec->filter_stream_count)
-			ttusb_dec_process_filter(dec, dec->packet,
-						 dec->packet_payload_length);
-		break;
-
-	case TTUSB_DEC_PACKET_EMPTY:
-		break;
-	}
-}
-
-static void swap_bytes(u8 *b, int length)
-{
-	u8 c;
-
-	length -= length % 2;
-	for (; length; b += 2, length -= 2) {
-		c = *b;
-		*b = *(b + 1);
-		*(b + 1) = c;
-	}
-}
-
-static void ttusb_dec_process_urb_frame(struct ttusb_dec *dec, u8 *b,
-					int length)
-{
-	swap_bytes(b, length);
-
-	while (length) {
-		switch (dec->packet_state) {
-
-		case 0:
-		case 1:
-		case 2:
-			if (*b++ == 0xaa)
-				dec->packet_state++;
-			else
-				dec->packet_state = 0;
-
-			length--;
-			break;
-
-		case 3:
-			if (*b == 0x00) {
-				dec->packet_state++;
-				dec->packet_length = 0;
-			} else if (*b != 0xaa) {
-				dec->packet_state = 0;
-			}
-
-			b++;
-			length--;
-			break;
-
-		case 4:
-			dec->packet[dec->packet_length++] = *b++;
-
-			if (dec->packet_length == 2) {
-				if (dec->packet[0] == 'A' &&
-				    dec->packet[1] == 'V') {
-					dec->packet_type =
-						TTUSB_DEC_PACKET_PVA;
-					dec->packet_state++;
-				} else if (dec->packet[0] == 'S') {
-					dec->packet_type =
-						TTUSB_DEC_PACKET_SECTION;
-					dec->packet_state++;
-				} else if (dec->packet[0] == 0x00) {
-					dec->packet_type =
-						TTUSB_DEC_PACKET_EMPTY;
-					dec->packet_payload_length = 2;
-					dec->packet_state = 7;
-				} else {
-					printk("%s: unknown packet type: "
-					       "%02x%02x\n", __func__,
-					       dec->packet[0], dec->packet[1]);
-					dec->packet_state = 0;
-				}
-			}
-
-			length--;
-			break;
-
-		case 5:
-			dec->packet[dec->packet_length++] = *b++;
-
-			if (dec->packet_type == TTUSB_DEC_PACKET_PVA &&
-			    dec->packet_length == 8) {
-				dec->packet_state++;
-				dec->packet_payload_length = 8 +
-					(dec->packet[6] << 8) +
-					dec->packet[7];
-			} else if (dec->packet_type ==
-					TTUSB_DEC_PACKET_SECTION &&
-				   dec->packet_length == 5) {
-				dec->packet_state++;
-				dec->packet_payload_length = 5 +
-					((dec->packet[3] & 0x0f) << 8) +
-					dec->packet[4];
-			}
-
-			length--;
-			break;
-
-		case 6: {
-			int remainder = dec->packet_payload_length -
-					dec->packet_length;
-
-			if (length >= remainder) {
-				memcpy(dec->packet + dec->packet_length,
-				       b, remainder);
-				dec->packet_length += remainder;
-				b += remainder;
-				length -= remainder;
-				dec->packet_state++;
-			} else {
-				memcpy(&dec->packet[dec->packet_length],
-				       b, length);
-				dec->packet_length += length;
-				length = 0;
-			}
-
-			break;
-		}
-
-		case 7: {
-			int tail = 4;
-
-			dec->packet[dec->packet_length++] = *b++;
-
-			if (dec->packet_type == TTUSB_DEC_PACKET_SECTION &&
-			    dec->packet_payload_length % 2)
-				tail++;
-
-			if (dec->packet_length ==
-			    dec->packet_payload_length + tail) {
-				ttusb_dec_process_packet(dec);
-				dec->packet_state = 0;
-			}
-
-			length--;
-			break;
-		}
-
-		default:
-			printk("%s: illegal packet state encountered.\n",
-			       __func__);
-			dec->packet_state = 0;
-		}
-	}
-}
-
-static void ttusb_dec_process_urb_frame_list(unsigned long data)
-{
-	struct ttusb_dec *dec = (struct ttusb_dec *)data;
-	struct list_head *item;
-	struct urb_frame *frame;
-	unsigned long flags;
-
-	while (1) {
-		spin_lock_irqsave(&dec->urb_frame_list_lock, flags);
-		if ((item = dec->urb_frame_list.next) != &dec->urb_frame_list) {
-			frame = list_entry(item, struct urb_frame,
-					   urb_frame_list);
-			list_del(&frame->urb_frame_list);
-		} else {
-			spin_unlock_irqrestore(&dec->urb_frame_list_lock,
-					       flags);
-			return;
-		}
-		spin_unlock_irqrestore(&dec->urb_frame_list_lock, flags);
-
-		ttusb_dec_process_urb_frame(dec, frame->data, frame->length);
-		kfree(frame);
-	}
-}
-
-static void ttusb_dec_process_urb(struct urb *urb)
-{
-	struct ttusb_dec *dec = urb->context;
-
-	if (!urb->status) {
-		int i;
-
-		for (i = 0; i < FRAMES_PER_ISO_BUF; i++) {
-			struct usb_iso_packet_descriptor *d;
-			u8 *b;
-			int length;
-			struct urb_frame *frame;
-
-			d = &urb->iso_frame_desc[i];
-			b = urb->transfer_buffer + d->offset;
-			length = d->actual_length;
-
-			if ((frame = kmalloc(sizeof(struct urb_frame),
-					     GFP_ATOMIC))) {
-				unsigned long flags;
-
-				memcpy(frame->data, b, length);
-				frame->length = length;
-
-				spin_lock_irqsave(&dec->urb_frame_list_lock,
-						     flags);
-				list_add_tail(&frame->urb_frame_list,
-					      &dec->urb_frame_list);
-				spin_unlock_irqrestore(&dec->urb_frame_list_lock,
-						       flags);
-
-				tasklet_schedule(&dec->urb_tasklet);
-			}
-		}
-	} else {
-		 /* -ENOENT is expected when unlinking urbs */
-		if (urb->status != -ENOENT)
-			dprintk("%s: urb error: %d\n", __func__,
-				urb->status);
-	}
-
-	if (dec->iso_stream_count)
-		usb_submit_urb(urb, GFP_ATOMIC);
-}
-
-static void ttusb_dec_setup_urbs(struct ttusb_dec *dec)
-{
-	int i, j, buffer_offset = 0;
-
-	dprintk("%s\n", __func__);
-
-	for (i = 0; i < ISO_BUF_COUNT; i++) {
-		int frame_offset = 0;
-		struct urb *urb = dec->iso_urb[i];
-
-		urb->dev = dec->udev;
-		urb->context = dec;
-		urb->complete = ttusb_dec_process_urb;
-		urb->pipe = dec->in_pipe;
-		urb->transfer_flags = URB_ISO_ASAP;
-		urb->interval = 1;
-		urb->number_of_packets = FRAMES_PER_ISO_BUF;
-		urb->transfer_buffer_length = ISO_FRAME_SIZE *
-					      FRAMES_PER_ISO_BUF;
-		urb->transfer_buffer = dec->iso_buffer + buffer_offset;
-		buffer_offset += ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF;
-
-		for (j = 0; j < FRAMES_PER_ISO_BUF; j++) {
-			urb->iso_frame_desc[j].offset = frame_offset;
-			urb->iso_frame_desc[j].length = ISO_FRAME_SIZE;
-			frame_offset += ISO_FRAME_SIZE;
-		}
-	}
-}
-
-static void ttusb_dec_stop_iso_xfer(struct ttusb_dec *dec)
-{
-	int i;
-
-	dprintk("%s\n", __func__);
-
-	if (mutex_lock_interruptible(&dec->iso_mutex))
-		return;
-
-	dec->iso_stream_count--;
-
-	if (!dec->iso_stream_count) {
-		for (i = 0; i < ISO_BUF_COUNT; i++)
-			usb_kill_urb(dec->iso_urb[i]);
-	}
-
-	mutex_unlock(&dec->iso_mutex);
-}
-
-/* Setting the interface of the DEC tends to take down the USB communications
- * for a short period, so it's important not to call this function just before
- * trying to talk to it.
- */
-static int ttusb_dec_set_interface(struct ttusb_dec *dec,
-				   enum ttusb_dec_interface interface)
-{
-	int result = 0;
-	u8 b[] = { 0x05 };
-
-	if (interface != dec->interface) {
-		switch (interface) {
-		case TTUSB_DEC_INTERFACE_INITIAL:
-			result = usb_set_interface(dec->udev, 0, 0);
-			break;
-		case TTUSB_DEC_INTERFACE_IN:
-			result = ttusb_dec_send_command(dec, 0x80, sizeof(b),
-							b, NULL, NULL);
-			if (result)
-				return result;
-			result = usb_set_interface(dec->udev, 0, 8);
-			break;
-		case TTUSB_DEC_INTERFACE_OUT:
-			result = usb_set_interface(dec->udev, 0, 1);
-			break;
-		}
-
-		if (result)
-			return result;
-
-		dec->interface = interface;
-	}
-
-	return 0;
-}
-
-static int ttusb_dec_start_iso_xfer(struct ttusb_dec *dec)
-{
-	int i, result;
-
-	dprintk("%s\n", __func__);
-
-	if (mutex_lock_interruptible(&dec->iso_mutex))
-		return -EAGAIN;
-
-	if (!dec->iso_stream_count) {
-		ttusb_dec_setup_urbs(dec);
-
-		dec->packet_state = 0;
-		dec->v_pes_postbytes = 0;
-		dec->next_packet_id = 0;
-
-		for (i = 0; i < ISO_BUF_COUNT; i++) {
-			if ((result = usb_submit_urb(dec->iso_urb[i],
-						     GFP_ATOMIC))) {
-				printk("%s: failed urb submission %d: "
-				       "error %d\n", __func__, i, result);
-
-				while (i) {
-					usb_kill_urb(dec->iso_urb[i - 1]);
-					i--;
-				}
-
-				mutex_unlock(&dec->iso_mutex);
-				return result;
-			}
-		}
-	}
-
-	dec->iso_stream_count++;
-
-	mutex_unlock(&dec->iso_mutex);
-
-	return 0;
-}
-
-static int ttusb_dec_start_ts_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
-	struct ttusb_dec *dec = dvbdmx->priv;
-	u8 b0[] = { 0x05 };
-	int result = 0;
-
-	dprintk("%s\n", __func__);
-
-	dprintk("  ts_type:");
-
-	if (dvbdmxfeed->ts_type & TS_DECODER)
-		dprintk(" TS_DECODER");
-
-	if (dvbdmxfeed->ts_type & TS_PACKET)
-		dprintk(" TS_PACKET");
-
-	if (dvbdmxfeed->ts_type & TS_PAYLOAD_ONLY)
-		dprintk(" TS_PAYLOAD_ONLY");
-
-	dprintk("\n");
-
-	switch (dvbdmxfeed->pes_type) {
-
-	case DMX_TS_PES_VIDEO:
-		dprintk("  pes_type: DMX_TS_PES_VIDEO\n");
-		dec->pid[DMX_PES_PCR] = dvbdmxfeed->pid;
-		dec->pid[DMX_PES_VIDEO] = dvbdmxfeed->pid;
-		dec->video_filter = dvbdmxfeed->filter;
-		ttusb_dec_set_pids(dec);
-		break;
-
-	case DMX_TS_PES_AUDIO:
-		dprintk("  pes_type: DMX_TS_PES_AUDIO\n");
-		dec->pid[DMX_PES_AUDIO] = dvbdmxfeed->pid;
-		dec->audio_filter = dvbdmxfeed->filter;
-		ttusb_dec_set_pids(dec);
-		break;
-
-	case DMX_TS_PES_TELETEXT:
-		dec->pid[DMX_PES_TELETEXT] = dvbdmxfeed->pid;
-		dprintk("  pes_type: DMX_TS_PES_TELETEXT(not supported)\n");
-		return -ENOSYS;
-
-	case DMX_TS_PES_PCR:
-		dprintk("  pes_type: DMX_TS_PES_PCR\n");
-		dec->pid[DMX_PES_PCR] = dvbdmxfeed->pid;
-		ttusb_dec_set_pids(dec);
-		break;
-
-	case DMX_TS_PES_OTHER:
-		dprintk("  pes_type: DMX_TS_PES_OTHER(not supported)\n");
-		return -ENOSYS;
-
-	default:
-		dprintk("  pes_type: unknown (%d)\n", dvbdmxfeed->pes_type);
-		return -EINVAL;
-
-	}
-
-	result = ttusb_dec_send_command(dec, 0x80, sizeof(b0), b0, NULL, NULL);
-	if (result)
-		return result;
-
-	dec->pva_stream_count++;
-	return ttusb_dec_start_iso_xfer(dec);
-}
-
-static int ttusb_dec_start_sec_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct ttusb_dec *dec = dvbdmxfeed->demux->priv;
-	u8 b0[] = { 0x00, 0x00, 0x00, 0x01,
-		    0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00,
-		    0x00, 0xff, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00,
-		    0x00 };
-	__be16 pid;
-	u8 c[COMMAND_PACKET_SIZE];
-	int c_length;
-	int result;
-	struct filter_info *finfo;
-	unsigned long flags;
-	u8 x = 1;
-
-	dprintk("%s\n", __func__);
-
-	pid = htons(dvbdmxfeed->pid);
-	memcpy(&b0[0], &pid, 2);
-	memcpy(&b0[4], &x, 1);
-	memcpy(&b0[5], &dvbdmxfeed->filter->filter.filter_value[0], 1);
-
-	result = ttusb_dec_send_command(dec, 0x60, sizeof(b0), b0,
-					&c_length, c);
-
-	if (!result) {
-		if (c_length == 2) {
-			if (!(finfo = kmalloc(sizeof(struct filter_info),
-					      GFP_ATOMIC)))
-				return -ENOMEM;
-
-			finfo->stream_id = c[1];
-			finfo->filter = dvbdmxfeed->filter;
-
-			spin_lock_irqsave(&dec->filter_info_list_lock, flags);
-			list_add_tail(&finfo->filter_info_list,
-				      &dec->filter_info_list);
-			spin_unlock_irqrestore(&dec->filter_info_list_lock,
-					       flags);
-
-			dvbdmxfeed->priv = finfo;
-
-			dec->filter_stream_count++;
-			return ttusb_dec_start_iso_xfer(dec);
-		}
-
-		return -EAGAIN;
-	} else
-		return result;
-}
-
-static int ttusb_dec_start_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
-
-	dprintk("%s\n", __func__);
-
-	if (!dvbdmx->dmx.frontend)
-		return -EINVAL;
-
-	dprintk("  pid: 0x%04X\n", dvbdmxfeed->pid);
-
-	switch (dvbdmxfeed->type) {
-
-	case DMX_TYPE_TS:
-		return ttusb_dec_start_ts_feed(dvbdmxfeed);
-		break;
-
-	case DMX_TYPE_SEC:
-		return ttusb_dec_start_sec_feed(dvbdmxfeed);
-		break;
-
-	default:
-		dprintk("  type: unknown (%d)\n", dvbdmxfeed->type);
-		return -EINVAL;
-
-	}
-}
-
-static int ttusb_dec_stop_ts_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct ttusb_dec *dec = dvbdmxfeed->demux->priv;
-	u8 b0[] = { 0x00 };
-
-	ttusb_dec_send_command(dec, 0x81, sizeof(b0), b0, NULL, NULL);
-
-	dec->pva_stream_count--;
-
-	ttusb_dec_stop_iso_xfer(dec);
-
-	return 0;
-}
-
-static int ttusb_dec_stop_sec_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	struct ttusb_dec *dec = dvbdmxfeed->demux->priv;
-	u8 b0[] = { 0x00, 0x00 };
-	struct filter_info *finfo = (struct filter_info *)dvbdmxfeed->priv;
-	unsigned long flags;
-
-	b0[1] = finfo->stream_id;
-	spin_lock_irqsave(&dec->filter_info_list_lock, flags);
-	list_del(&finfo->filter_info_list);
-	spin_unlock_irqrestore(&dec->filter_info_list_lock, flags);
-	kfree(finfo);
-	ttusb_dec_send_command(dec, 0x62, sizeof(b0), b0, NULL, NULL);
-
-	dec->filter_stream_count--;
-
-	ttusb_dec_stop_iso_xfer(dec);
-
-	return 0;
-}
-
-static int ttusb_dec_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-	dprintk("%s\n", __func__);
-
-	switch (dvbdmxfeed->type) {
-	case DMX_TYPE_TS:
-		return ttusb_dec_stop_ts_feed(dvbdmxfeed);
-		break;
-
-	case DMX_TYPE_SEC:
-		return ttusb_dec_stop_sec_feed(dvbdmxfeed);
-		break;
-	}
-
-	return 0;
-}
-
-static void ttusb_dec_free_iso_urbs(struct ttusb_dec *dec)
-{
-	int i;
-
-	dprintk("%s\n", __func__);
-
-	for (i = 0; i < ISO_BUF_COUNT; i++)
-		usb_free_urb(dec->iso_urb[i]);
-
-	pci_free_consistent(NULL,
-			    ISO_FRAME_SIZE * (FRAMES_PER_ISO_BUF *
-					      ISO_BUF_COUNT),
-			    dec->iso_buffer, dec->iso_dma_handle);
-}
-
-static int ttusb_dec_alloc_iso_urbs(struct ttusb_dec *dec)
-{
-	int i;
-
-	dprintk("%s\n", __func__);
-
-	dec->iso_buffer = pci_alloc_consistent(NULL,
-					       ISO_FRAME_SIZE *
-					       (FRAMES_PER_ISO_BUF *
-						ISO_BUF_COUNT),
-					       &dec->iso_dma_handle);
-
-	if (!dec->iso_buffer) {
-		dprintk("%s: pci_alloc_consistent - not enough memory\n",
-			__func__);
-		return -ENOMEM;
-	}
-
-	memset(dec->iso_buffer, 0,
-	       ISO_FRAME_SIZE * (FRAMES_PER_ISO_BUF * ISO_BUF_COUNT));
-
-	for (i = 0; i < ISO_BUF_COUNT; i++) {
-		struct urb *urb;
-
-		if (!(urb = usb_alloc_urb(FRAMES_PER_ISO_BUF, GFP_ATOMIC))) {
-			ttusb_dec_free_iso_urbs(dec);
-			return -ENOMEM;
-		}
-
-		dec->iso_urb[i] = urb;
-	}
-
-	ttusb_dec_setup_urbs(dec);
-
-	return 0;
-}
-
-static void ttusb_dec_init_tasklet(struct ttusb_dec *dec)
-{
-	spin_lock_init(&dec->urb_frame_list_lock);
-	INIT_LIST_HEAD(&dec->urb_frame_list);
-	tasklet_init(&dec->urb_tasklet, ttusb_dec_process_urb_frame_list,
-		     (unsigned long)dec);
-}
-
-static int ttusb_init_rc( struct ttusb_dec *dec)
-{
-	struct input_dev *input_dev;
-	u8 b[] = { 0x00, 0x01 };
-	int i;
-	int err;
-
-	usb_make_path(dec->udev, dec->rc_phys, sizeof(dec->rc_phys));
-	strlcat(dec->rc_phys, "/input0", sizeof(dec->rc_phys));
-
-	input_dev = input_allocate_device();
-	if (!input_dev)
-		return -ENOMEM;
-
-	input_dev->name = "ttusb_dec remote control";
-	input_dev->phys = dec->rc_phys;
-	input_dev->evbit[0] = BIT_MASK(EV_KEY);
-	input_dev->keycodesize = sizeof(u16);
-	input_dev->keycodemax = 0x1a;
-	input_dev->keycode = rc_keys;
-
-	for (i = 0; i < ARRAY_SIZE(rc_keys); i++)
-		  set_bit(rc_keys[i], input_dev->keybit);
-
-	err = input_register_device(input_dev);
-	if (err) {
-		input_free_device(input_dev);
-		return err;
-	}
-
-	dec->rc_input_dev = input_dev;
-	if (usb_submit_urb(dec->irq_urb, GFP_KERNEL))
-		printk("%s: usb_submit_urb failed\n",__func__);
-	/* enable irq pipe */
-	ttusb_dec_send_command(dec,0xb0,sizeof(b),b,NULL,NULL);
-
-	return 0;
-}
-
-static void ttusb_dec_init_v_pes(struct ttusb_dec *dec)
-{
-	dprintk("%s\n", __func__);
-
-	dec->v_pes[0] = 0x00;
-	dec->v_pes[1] = 0x00;
-	dec->v_pes[2] = 0x01;
-	dec->v_pes[3] = 0xe0;
-}
-
-static int ttusb_dec_init_usb(struct ttusb_dec *dec)
-{
-	dprintk("%s\n", __func__);
-
-	mutex_init(&dec->usb_mutex);
-	mutex_init(&dec->iso_mutex);
-
-	dec->command_pipe = usb_sndbulkpipe(dec->udev, COMMAND_PIPE);
-	dec->result_pipe = usb_rcvbulkpipe(dec->udev, RESULT_PIPE);
-	dec->in_pipe = usb_rcvisocpipe(dec->udev, IN_PIPE);
-	dec->out_pipe = usb_sndisocpipe(dec->udev, OUT_PIPE);
-	dec->irq_pipe = usb_rcvintpipe(dec->udev, IRQ_PIPE);
-
-	if(enable_rc) {
-		dec->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
-		if(!dec->irq_urb) {
-			return -ENOMEM;
-		}
-		dec->irq_buffer = usb_alloc_coherent(dec->udev,IRQ_PACKET_SIZE,
-					GFP_ATOMIC, &dec->irq_dma_handle);
-		if(!dec->irq_buffer) {
-			usb_free_urb(dec->irq_urb);
-			return -ENOMEM;
-		}
-		usb_fill_int_urb(dec->irq_urb, dec->udev,dec->irq_pipe,
-				 dec->irq_buffer, IRQ_PACKET_SIZE,
-				 ttusb_dec_handle_irq, dec, 1);
-		dec->irq_urb->transfer_dma = dec->irq_dma_handle;
-		dec->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-	}
-
-	return ttusb_dec_alloc_iso_urbs(dec);
-}
-
-static int ttusb_dec_boot_dsp(struct ttusb_dec *dec)
-{
-	int i, j, actual_len, result, size, trans_count;
-	u8 b0[] = { 0x00, 0x00, 0x00, 0x00,
-		    0x00, 0x00, 0x00, 0x00,
-		    0x61, 0x00 };
-	u8 b1[] = { 0x61 };
-	u8 *b;
-	char idstring[21];
-	const u8 *firmware = NULL;
-	size_t firmware_size = 0;
-	u16 firmware_csum = 0;
-	__be16 firmware_csum_ns;
-	__be32 firmware_size_nl;
-	u32 crc32_csum, crc32_check;
-	__be32 tmp;
-	const struct firmware *fw_entry = NULL;
-
-	dprintk("%s\n", __func__);
-
-	if (request_firmware(&fw_entry, dec->firmware_name, &dec->udev->dev)) {
-		printk(KERN_ERR "%s: Firmware (%s) unavailable.\n",
-		       __func__, dec->firmware_name);
-		return 1;
-	}
-
-	firmware = fw_entry->data;
-	firmware_size = fw_entry->size;
-
-	if (firmware_size < 60) {
-		printk("%s: firmware size too small for DSP code (%zu < 60).\n",
-			__func__, firmware_size);
-		release_firmware(fw_entry);
-		return -1;
-	}
-
-	/* a 32 bit checksum over the first 56 bytes of the DSP Code is stored
-	   at offset 56 of file, so use it to check if the firmware file is
-	   valid. */
-	crc32_csum = crc32(~0L, firmware, 56) ^ ~0L;
-	memcpy(&tmp, &firmware[56], 4);
-	crc32_check = ntohl(tmp);
-	if (crc32_csum != crc32_check) {
-		printk("%s: crc32 check of DSP code failed (calculated "
-		       "0x%08x != 0x%08x in file), file invalid.\n",
-			__func__, crc32_csum, crc32_check);
-		release_firmware(fw_entry);
-		return -1;
-	}
-	memcpy(idstring, &firmware[36], 20);
-	idstring[20] = '\0';
-	printk(KERN_INFO "ttusb_dec: found DSP code \"%s\".\n", idstring);
-
-	firmware_size_nl = htonl(firmware_size);
-	memcpy(b0, &firmware_size_nl, 4);
-	firmware_csum = crc16(~0, firmware, firmware_size) ^ ~0;
-	firmware_csum_ns = htons(firmware_csum);
-	memcpy(&b0[6], &firmware_csum_ns, 2);
-
-	result = ttusb_dec_send_command(dec, 0x41, sizeof(b0), b0, NULL, NULL);
-
-	if (result) {
-		release_firmware(fw_entry);
-		return result;
-	}
-
-	trans_count = 0;
-	j = 0;
-
-	b = kmalloc(ARM_PACKET_SIZE, GFP_KERNEL);
-	if (b == NULL) {
-		release_firmware(fw_entry);
-		return -ENOMEM;
-	}
-
-	for (i = 0; i < firmware_size; i += COMMAND_PACKET_SIZE) {
-		size = firmware_size - i;
-		if (size > COMMAND_PACKET_SIZE)
-			size = COMMAND_PACKET_SIZE;
-
-		b[j + 0] = 0xaa;
-		b[j + 1] = trans_count++;
-		b[j + 2] = 0xf0;
-		b[j + 3] = size;
-		memcpy(&b[j + 4], &firmware[i], size);
-
-		j += COMMAND_PACKET_SIZE + 4;
-
-		if (j >= ARM_PACKET_SIZE) {
-			result = usb_bulk_msg(dec->udev, dec->command_pipe, b,
-					      ARM_PACKET_SIZE, &actual_len,
-					      100);
-			j = 0;
-		} else if (size < COMMAND_PACKET_SIZE) {
-			result = usb_bulk_msg(dec->udev, dec->command_pipe, b,
-					      j - COMMAND_PACKET_SIZE + size,
-					      &actual_len, 100);
-		}
-	}
-
-	result = ttusb_dec_send_command(dec, 0x43, sizeof(b1), b1, NULL, NULL);
-
-	release_firmware(fw_entry);
-	kfree(b);
-
-	return result;
-}
-
-static int ttusb_dec_init_stb(struct ttusb_dec *dec)
-{
-	int result;
-	unsigned int mode = 0, model = 0, version = 0;
-
-	dprintk("%s\n", __func__);
-
-	result = ttusb_dec_get_stb_state(dec, &mode, &model, &version);
-
-	if (!result) {
-		if (!mode) {
-			if (version == 0xABCDEFAB)
-				printk(KERN_INFO "ttusb_dec: no version "
-				       "info in Firmware\n");
-			else
-				printk(KERN_INFO "ttusb_dec: Firmware "
-				       "%x.%02x%c%c\n",
-				       version >> 24, (version >> 16) & 0xff,
-				       (version >> 8) & 0xff, version & 0xff);
-
-			result = ttusb_dec_boot_dsp(dec);
-			if (result)
-				return result;
-			else
-				return 1;
-		} else {
-			/* We can't trust the USB IDs that some firmwares
-			   give the box */
-			switch (model) {
-			case 0x00070001:
-			case 0x00070008:
-			case 0x0007000c:
-				ttusb_dec_set_model(dec, TTUSB_DEC3000S);
-				break;
-			case 0x00070009:
-			case 0x00070013:
-				ttusb_dec_set_model(dec, TTUSB_DEC2000T);
-				break;
-			case 0x00070011:
-				ttusb_dec_set_model(dec, TTUSB_DEC2540T);
-				break;
-			default:
-				printk(KERN_ERR "%s: unknown model returned "
-				       "by firmware (%08x) - please report\n",
-				       __func__, model);
-				return -1;
-				break;
-			}
-
-			if (version >= 0x01770000)
-				dec->can_playback = 1;
-
-			return 0;
-		}
-	}
-	else
-		return result;
-}
-
-static int ttusb_dec_init_dvb(struct ttusb_dec *dec)
-{
-	int result;
-
-	dprintk("%s\n", __func__);
-
-	if ((result = dvb_register_adapter(&dec->adapter,
-					   dec->model_name, THIS_MODULE,
-					   &dec->udev->dev,
-					   adapter_nr)) < 0) {
-		printk("%s: dvb_register_adapter failed: error %d\n",
-		       __func__, result);
-
-		return result;
-	}
-
-	dec->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING;
-
-	dec->demux.priv = (void *)dec;
-	dec->demux.filternum = 31;
-	dec->demux.feednum = 31;
-	dec->demux.start_feed = ttusb_dec_start_feed;
-	dec->demux.stop_feed = ttusb_dec_stop_feed;
-	dec->demux.write_to_decoder = NULL;
-
-	if ((result = dvb_dmx_init(&dec->demux)) < 0) {
-		printk("%s: dvb_dmx_init failed: error %d\n", __func__,
-		       result);
-
-		dvb_unregister_adapter(&dec->adapter);
-
-		return result;
-	}
-
-	dec->dmxdev.filternum = 32;
-	dec->dmxdev.demux = &dec->demux.dmx;
-	dec->dmxdev.capabilities = 0;
-
-	if ((result = dvb_dmxdev_init(&dec->dmxdev, &dec->adapter)) < 0) {
-		printk("%s: dvb_dmxdev_init failed: error %d\n",
-		       __func__, result);
-
-		dvb_dmx_release(&dec->demux);
-		dvb_unregister_adapter(&dec->adapter);
-
-		return result;
-	}
-
-	dec->frontend.source = DMX_FRONTEND_0;
-
-	if ((result = dec->demux.dmx.add_frontend(&dec->demux.dmx,
-						  &dec->frontend)) < 0) {
-		printk("%s: dvb_dmx_init failed: error %d\n", __func__,
-		       result);
-
-		dvb_dmxdev_release(&dec->dmxdev);
-		dvb_dmx_release(&dec->demux);
-		dvb_unregister_adapter(&dec->adapter);
-
-		return result;
-	}
-
-	if ((result = dec->demux.dmx.connect_frontend(&dec->demux.dmx,
-						      &dec->frontend)) < 0) {
-		printk("%s: dvb_dmx_init failed: error %d\n", __func__,
-		       result);
-
-		dec->demux.dmx.remove_frontend(&dec->demux.dmx, &dec->frontend);
-		dvb_dmxdev_release(&dec->dmxdev);
-		dvb_dmx_release(&dec->demux);
-		dvb_unregister_adapter(&dec->adapter);
-
-		return result;
-	}
-
-	dvb_net_init(&dec->adapter, &dec->dvb_net, &dec->demux.dmx);
-
-	return 0;
-}
-
-static void ttusb_dec_exit_dvb(struct ttusb_dec *dec)
-{
-	dprintk("%s\n", __func__);
-
-	dvb_net_release(&dec->dvb_net);
-	dec->demux.dmx.close(&dec->demux.dmx);
-	dec->demux.dmx.remove_frontend(&dec->demux.dmx, &dec->frontend);
-	dvb_dmxdev_release(&dec->dmxdev);
-	dvb_dmx_release(&dec->demux);
-	if (dec->fe) {
-		dvb_unregister_frontend(dec->fe);
-		if (dec->fe->ops.release)
-			dec->fe->ops.release(dec->fe);
-	}
-	dvb_unregister_adapter(&dec->adapter);
-}
-
-static void ttusb_dec_exit_rc(struct ttusb_dec *dec)
-{
-
-	dprintk("%s\n", __func__);
-	/* we have to check whether the irq URB is already submitted.
-	  * As the irq is submitted after the interface is changed,
-	  * this is the best method i figured out.
-	  * Any others?*/
-	if (dec->interface == TTUSB_DEC_INTERFACE_IN)
-		usb_kill_urb(dec->irq_urb);
-
-	usb_free_urb(dec->irq_urb);
-
-	usb_free_coherent(dec->udev,IRQ_PACKET_SIZE,
-			  dec->irq_buffer, dec->irq_dma_handle);
-
-	if (dec->rc_input_dev) {
-		input_unregister_device(dec->rc_input_dev);
-		dec->rc_input_dev = NULL;
-	}
-}
-
-
-static void ttusb_dec_exit_usb(struct ttusb_dec *dec)
-{
-	int i;
-
-	dprintk("%s\n", __func__);
-
-	dec->iso_stream_count = 0;
-
-	for (i = 0; i < ISO_BUF_COUNT; i++)
-		usb_kill_urb(dec->iso_urb[i]);
-
-	ttusb_dec_free_iso_urbs(dec);
-}
-
-static void ttusb_dec_exit_tasklet(struct ttusb_dec *dec)
-{
-	struct list_head *item;
-	struct urb_frame *frame;
-
-	tasklet_kill(&dec->urb_tasklet);
-
-	while ((item = dec->urb_frame_list.next) != &dec->urb_frame_list) {
-		frame = list_entry(item, struct urb_frame, urb_frame_list);
-		list_del(&frame->urb_frame_list);
-		kfree(frame);
-	}
-}
-
-static void ttusb_dec_init_filters(struct ttusb_dec *dec)
-{
-	INIT_LIST_HEAD(&dec->filter_info_list);
-	spin_lock_init(&dec->filter_info_list_lock);
-}
-
-static void ttusb_dec_exit_filters(struct ttusb_dec *dec)
-{
-	struct list_head *item;
-	struct filter_info *finfo;
-
-	while ((item = dec->filter_info_list.next) != &dec->filter_info_list) {
-		finfo = list_entry(item, struct filter_info, filter_info_list);
-		list_del(&finfo->filter_info_list);
-		kfree(finfo);
-	}
-}
-
-static int fe_send_command(struct dvb_frontend* fe, const u8 command,
-			   int param_length, const u8 params[],
-			   int *result_length, u8 cmd_result[])
-{
-	struct ttusb_dec* dec = fe->dvb->priv;
-	return ttusb_dec_send_command(dec, command, param_length, params, result_length, cmd_result);
-}
-
-static struct ttusbdecfe_config fe_config = {
-	.send_command = fe_send_command
-};
-
-static int ttusb_dec_probe(struct usb_interface *intf,
-			   const struct usb_device_id *id)
-{
-	struct usb_device *udev;
-	struct ttusb_dec *dec;
-
-	dprintk("%s\n", __func__);
-
-	udev = interface_to_usbdev(intf);
-
-	if (!(dec = kzalloc(sizeof(struct ttusb_dec), GFP_KERNEL))) {
-		printk("%s: couldn't allocate memory.\n", __func__);
-		return -ENOMEM;
-	}
-
-	usb_set_intfdata(intf, (void *)dec);
-
-	switch (id->idProduct) {
-	case 0x1006:
-		ttusb_dec_set_model(dec, TTUSB_DEC3000S);
-		break;
-
-	case 0x1008:
-		ttusb_dec_set_model(dec, TTUSB_DEC2000T);
-		break;
-
-	case 0x1009:
-		ttusb_dec_set_model(dec, TTUSB_DEC2540T);
-		break;
-	}
-
-	dec->udev = udev;
-
-	if (ttusb_dec_init_usb(dec))
-		return 0;
-	if (ttusb_dec_init_stb(dec)) {
-		ttusb_dec_exit_usb(dec);
-		return 0;
-	}
-	ttusb_dec_init_dvb(dec);
-
-	dec->adapter.priv = dec;
-	switch (id->idProduct) {
-	case 0x1006:
-		dec->fe = ttusbdecfe_dvbs_attach(&fe_config);
-		break;
-
-	case 0x1008:
-	case 0x1009:
-		dec->fe = ttusbdecfe_dvbt_attach(&fe_config);
-		break;
-	}
-
-	if (dec->fe == NULL) {
-		printk("dvb-ttusb-dec: A frontend driver was not found for device [%04x:%04x]\n",
-		       le16_to_cpu(dec->udev->descriptor.idVendor),
-		       le16_to_cpu(dec->udev->descriptor.idProduct));
-	} else {
-		if (dvb_register_frontend(&dec->adapter, dec->fe)) {
-			printk("budget-ci: Frontend registration failed!\n");
-			if (dec->fe->ops.release)
-				dec->fe->ops.release(dec->fe);
-			dec->fe = NULL;
-		}
-	}
-
-	ttusb_dec_init_v_pes(dec);
-	ttusb_dec_init_filters(dec);
-	ttusb_dec_init_tasklet(dec);
-
-	dec->active = 1;
-
-	ttusb_dec_set_interface(dec, TTUSB_DEC_INTERFACE_IN);
-
-	if (enable_rc)
-		ttusb_init_rc(dec);
-
-	return 0;
-}
-
-static void ttusb_dec_disconnect(struct usb_interface *intf)
-{
-	struct ttusb_dec *dec = usb_get_intfdata(intf);
-
-	usb_set_intfdata(intf, NULL);
-
-	dprintk("%s\n", __func__);
-
-	if (dec->active) {
-		ttusb_dec_exit_tasklet(dec);
-		ttusb_dec_exit_filters(dec);
-		if(enable_rc)
-			ttusb_dec_exit_rc(dec);
-		ttusb_dec_exit_usb(dec);
-		ttusb_dec_exit_dvb(dec);
-	}
-
-	kfree(dec);
-}
-
-static void ttusb_dec_set_model(struct ttusb_dec *dec,
-				enum ttusb_dec_model model)
-{
-	dec->model = model;
-
-	switch (model) {
-	case TTUSB_DEC2000T:
-		dec->model_name = "DEC2000-t";
-		dec->firmware_name = "dvb-ttusb-dec-2000t.fw";
-		break;
-
-	case TTUSB_DEC2540T:
-		dec->model_name = "DEC2540-t";
-		dec->firmware_name = "dvb-ttusb-dec-2540t.fw";
-		break;
-
-	case TTUSB_DEC3000S:
-		dec->model_name = "DEC3000-s";
-		dec->firmware_name = "dvb-ttusb-dec-3000s.fw";
-		break;
-	}
-}
-
-static struct usb_device_id ttusb_dec_table[] = {
-	{USB_DEVICE(0x0b48, 0x1006)},	/* DEC3000-s */
-	/*{USB_DEVICE(0x0b48, 0x1007)},	   Unconfirmed */
-	{USB_DEVICE(0x0b48, 0x1008)},	/* DEC2000-t */
-	{USB_DEVICE(0x0b48, 0x1009)},	/* DEC2540-t */
-	{}
-};
-
-static struct usb_driver ttusb_dec_driver = {
-	.name		= "ttusb-dec",
-	.probe		= ttusb_dec_probe,
-	.disconnect	= ttusb_dec_disconnect,
-	.id_table	= ttusb_dec_table,
-};
-
-module_usb_driver(ttusb_dec_driver);
-
-MODULE_AUTHOR("Alex Woods <linux-dvb@giblets.org>");
-MODULE_DESCRIPTION(DRIVER_NAME);
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(usb, ttusb_dec_table);
diff --git a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c
deleted file mode 100644
index 5c45c9d..0000000
--- a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * TTUSB DEC Frontend Driver
- *
- * Copyright (C) 2003-2004 Alex Woods <linux-dvb@giblets.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include "dvb_frontend.h"
-#include "ttusbdecfe.h"
-
-
-#define LOF_HI			10600000
-#define LOF_LO			9750000
-
-struct ttusbdecfe_state {
-
-	/* configuration settings */
-	const struct ttusbdecfe_config* config;
-
-	struct dvb_frontend frontend;
-
-	u8 hi_band;
-	u8 voltage;
-};
-
-
-static int ttusbdecfe_dvbs_read_status(struct dvb_frontend *fe,
-	fe_status_t *status)
-{
-	*status = FE_HAS_SIGNAL | FE_HAS_VITERBI |
-		FE_HAS_SYNC | FE_HAS_CARRIER | FE_HAS_LOCK;
-	return 0;
-}
-
-
-static int ttusbdecfe_dvbt_read_status(struct dvb_frontend *fe,
-	fe_status_t *status)
-{
-	struct ttusbdecfe_state* state = fe->demodulator_priv;
-	u8 b[] = { 0x00, 0x00, 0x00, 0x00,
-		   0x00, 0x00, 0x00, 0x00 };
-	u8 result[4];
-	int len, ret;
-
-	*status=0;
-
-	ret=state->config->send_command(fe, 0x73, sizeof(b), b, &len, result);
-	if(ret)
-		return ret;
-
-	if(len != 4) {
-		printk(KERN_ERR "%s: unexpected reply\n", __func__);
-		return -EIO;
-	}
-
-	switch(result[3]) {
-		case 1:  /* not tuned yet */
-		case 2:  /* no signal/no lock*/
-			break;
-		case 3:	 /* signal found and locked*/
-			*status = FE_HAS_SIGNAL | FE_HAS_VITERBI |
-			FE_HAS_SYNC | FE_HAS_CARRIER | FE_HAS_LOCK;
-			break;
-		case 4:
-			*status = FE_TIMEDOUT;
-			break;
-		default:
-			pr_info("%s: returned unknown value: %d\n",
-				__func__, result[3]);
-			return -EIO;
-	}
-
-	return 0;
-}
-
-static int ttusbdecfe_dvbt_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct ttusbdecfe_state* state = (struct ttusbdecfe_state*) fe->demodulator_priv;
-	u8 b[] = { 0x00, 0x00, 0x00, 0x03,
-		   0x00, 0x00, 0x00, 0x00,
-		   0x00, 0x00, 0x00, 0x01,
-		   0x00, 0x00, 0x00, 0xff,
-		   0x00, 0x00, 0x00, 0xff };
-
-	__be32 freq = htonl(p->frequency / 1000);
-	memcpy(&b[4], &freq, sizeof (u32));
-	state->config->send_command(fe, 0x71, sizeof(b), b, NULL, NULL);
-
-	return 0;
-}
-
-static int ttusbdecfe_dvbt_get_tune_settings(struct dvb_frontend* fe,
-					struct dvb_frontend_tune_settings* fesettings)
-{
-		fesettings->min_delay_ms = 1500;
-		/* Drift compensation makes no sense for DVB-T */
-		fesettings->step_size = 0;
-		fesettings->max_drift = 0;
-		return 0;
-}
-
-static int ttusbdecfe_dvbs_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct ttusbdecfe_state* state = (struct ttusbdecfe_state*) fe->demodulator_priv;
-
-	u8 b[] = { 0x00, 0x00, 0x00, 0x01,
-		   0x00, 0x00, 0x00, 0x00,
-		   0x00, 0x00, 0x00, 0x01,
-		   0x00, 0x00, 0x00, 0x00,
-		   0x00, 0x00, 0x00, 0x00,
-		   0x00, 0x00, 0x00, 0x00,
-		   0x00, 0x00, 0x00, 0x00,
-		   0x00, 0x00, 0x00, 0x00,
-		   0x00, 0x00, 0x00, 0x00,
-		   0x00, 0x00, 0x00, 0x00 };
-	__be32 freq;
-	__be32 sym_rate;
-	__be32 band;
-	__be32 lnb_voltage;
-
-	freq = htonl(p->frequency +
-	       (state->hi_band ? LOF_HI : LOF_LO));
-	memcpy(&b[4], &freq, sizeof(u32));
-	sym_rate = htonl(p->symbol_rate);
-	memcpy(&b[12], &sym_rate, sizeof(u32));
-	band = htonl(state->hi_band ? LOF_HI : LOF_LO);
-	memcpy(&b[24], &band, sizeof(u32));
-	lnb_voltage = htonl(state->voltage);
-	memcpy(&b[28], &lnb_voltage, sizeof(u32));
-
-	state->config->send_command(fe, 0x71, sizeof(b), b, NULL, NULL);
-
-	return 0;
-}
-
-static int ttusbdecfe_dvbs_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *cmd)
-{
-	struct ttusbdecfe_state* state = (struct ttusbdecfe_state*) fe->demodulator_priv;
-	u8 b[] = { 0x00, 0xff, 0x00, 0x00,
-		   0x00, 0x00, 0x00, 0x00,
-		   0x00, 0x00 };
-
-	memcpy(&b[4], cmd->msg, cmd->msg_len);
-
-	state->config->send_command(fe, 0x72,
-				    sizeof(b) - (6 - cmd->msg_len), b,
-				    NULL, NULL);
-
-	return 0;
-}
-
-
-static int ttusbdecfe_dvbs_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
-{
-	struct ttusbdecfe_state* state = (struct ttusbdecfe_state*) fe->demodulator_priv;
-
-	state->hi_band = (SEC_TONE_ON == tone);
-
-	return 0;
-}
-
-
-static int ttusbdecfe_dvbs_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
-{
-	struct ttusbdecfe_state* state = (struct ttusbdecfe_state*) fe->demodulator_priv;
-
-	switch (voltage) {
-	case SEC_VOLTAGE_13:
-		state->voltage = 13;
-		break;
-	case SEC_VOLTAGE_18:
-		state->voltage = 18;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static void ttusbdecfe_release(struct dvb_frontend* fe)
-{
-	struct ttusbdecfe_state* state = (struct ttusbdecfe_state*) fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops ttusbdecfe_dvbt_ops;
-
-struct dvb_frontend* ttusbdecfe_dvbt_attach(const struct ttusbdecfe_config* config)
-{
-	struct ttusbdecfe_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct ttusbdecfe_state), GFP_KERNEL);
-	if (state == NULL)
-		return NULL;
-
-	/* setup the state */
-	state->config = config;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &ttusbdecfe_dvbt_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-}
-
-static struct dvb_frontend_ops ttusbdecfe_dvbs_ops;
-
-struct dvb_frontend* ttusbdecfe_dvbs_attach(const struct ttusbdecfe_config* config)
-{
-	struct ttusbdecfe_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct ttusbdecfe_state), GFP_KERNEL);
-	if (state == NULL)
-		return NULL;
-
-	/* setup the state */
-	state->config = config;
-	state->voltage = 0;
-	state->hi_band = 0;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &ttusbdecfe_dvbs_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-}
-
-static struct dvb_frontend_ops ttusbdecfe_dvbt_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name			= "TechnoTrend/Hauppauge DEC2000-t Frontend",
-		.frequency_min		= 51000000,
-		.frequency_max		= 858000000,
-		.frequency_stepsize	= 62500,
-		.caps =	FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
-			FE_CAN_HIERARCHY_AUTO,
-	},
-
-	.release = ttusbdecfe_release,
-
-	.set_frontend = ttusbdecfe_dvbt_set_frontend,
-
-	.get_tune_settings = ttusbdecfe_dvbt_get_tune_settings,
-
-	.read_status = ttusbdecfe_dvbt_read_status,
-};
-
-static struct dvb_frontend_ops ttusbdecfe_dvbs_ops = {
-	.delsys = { SYS_DVBS },
-	.info = {
-		.name			= "TechnoTrend/Hauppauge DEC3000-s Frontend",
-		.frequency_min		= 950000,
-		.frequency_max		= 2150000,
-		.frequency_stepsize	= 125,
-		.symbol_rate_min        = 1000000,  /* guessed */
-		.symbol_rate_max        = 45000000, /* guessed */
-		.caps =	FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK
-	},
-
-	.release = ttusbdecfe_release,
-
-	.set_frontend = ttusbdecfe_dvbs_set_frontend,
-
-	.read_status = ttusbdecfe_dvbs_read_status,
-
-	.diseqc_send_master_cmd = ttusbdecfe_dvbs_diseqc_send_master_cmd,
-	.set_voltage = ttusbdecfe_dvbs_set_voltage,
-	.set_tone = ttusbdecfe_dvbs_set_tone,
-};
-
-MODULE_DESCRIPTION("TTUSB DEC DVB-T/S Demodulator driver");
-MODULE_AUTHOR("Alex Woods/Andrew de Quincey");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(ttusbdecfe_dvbt_attach);
-EXPORT_SYMBOL(ttusbdecfe_dvbs_attach);
diff --git a/drivers/media/dvb/ttusb-dec/ttusbdecfe.h b/drivers/media/dvb/ttusb-dec/ttusbdecfe.h
deleted file mode 100644
index 15ccc3d..0000000
--- a/drivers/media/dvb/ttusb-dec/ttusbdecfe.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * TTUSB DEC Driver
- *
- * Copyright (C) 2003-2004 Alex Woods <linux-dvb@giblets.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef TTUSBDECFE_H
-#define TTUSBDECFE_H
-
-#include <linux/dvb/frontend.h>
-
-struct ttusbdecfe_config
-{
-	int (*send_command)(struct dvb_frontend* fe, const u8 command,
-			    int param_length, const u8 params[],
-			    int *result_length, u8 cmd_result[]);
-};
-
-extern struct dvb_frontend* ttusbdecfe_dvbs_attach(const struct ttusbdecfe_config* config);
-
-extern struct dvb_frontend* ttusbdecfe_dvbt_attach(const struct ttusbdecfe_config* config);
-
-#endif // TTUSBDECFE_H