diff options
Diffstat (limited to 'drivers/media/i2c/smiapp-pll.c')
| -rw-r--r-- | drivers/media/i2c/smiapp-pll.c | 19 |
1 files changed, 15 insertions, 4 deletions
diff --git a/drivers/media/i2c/smiapp-pll.c b/drivers/media/i2c/smiapp-pll.c index d7e3475..d324360 100644 --- a/drivers/media/i2c/smiapp-pll.c +++ b/drivers/media/i2c/smiapp-pll.c @@ -371,7 +371,7 @@ int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits, int rval = -EINVAL; if (pll->flags & SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE) - lane_op_clock_ratio = pll->lanes; + lane_op_clock_ratio = pll->csi2.lanes; else lane_op_clock_ratio = 1; dev_dbg(dev, "lane_op_clock_ratio: %d\n", lane_op_clock_ratio); @@ -379,9 +379,20 @@ int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits, dev_dbg(dev, "binning: %dx%d\n", pll->binning_horizontal, pll->binning_vertical); - /* CSI transfers 2 bits per clock per lane; thus times 2 */ - pll->pll_op_clk_freq_hz = pll->link_freq * 2 - * (pll->lanes / lane_op_clock_ratio); + switch (pll->bus_type) { + case SMIAPP_PLL_BUS_TYPE_CSI2: + /* CSI transfers 2 bits per clock per lane; thus times 2 */ + pll->pll_op_clk_freq_hz = pll->link_freq * 2 + * (pll->csi2.lanes / lane_op_clock_ratio); + break; + case SMIAPP_PLL_BUS_TYPE_PARALLEL: + pll->pll_op_clk_freq_hz = pll->link_freq * pll->bits_per_pixel + / DIV_ROUND_UP(pll->bits_per_pixel, + pll->parallel.bus_width); + break; + default: + return -EINVAL; + } /* Figure out limits for pre-pll divider based on extclk */ dev_dbg(dev, "min / max pre_pll_clk_div: %d / %d\n", |