diff options
Diffstat (limited to 'drivers/media/video/pwc/pwc-if.c')
-rw-r--r-- | drivers/media/video/pwc/pwc-if.c | 43 |
1 files changed, 16 insertions, 27 deletions
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 6bff33b..d2a1f3f 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -133,7 +133,7 @@ static int default_fps = 10; #ifdef CONFIG_USB_PWC_DEBUG int pwc_trace = PWC_DEBUG_LEVEL; #endif -static int power_save; +static int power_save = -1; static int led_on = 100, led_off; /* defaults to LED that is on while in use */ static int pwc_preferred_compression = 1; /* 0..3 = uncompressed..high */ static struct { @@ -720,7 +720,6 @@ static int pwc_video_open(struct file *file) return -EBUSY; } - pwc_construct(pdev); /* set min/max sizes correct */ if (!pdev->usb_init) { PWC_DEBUG_OPEN("Doing first time initialization.\n"); pdev->usb_init = 1; @@ -735,16 +734,9 @@ static int pwc_video_open(struct file *file) } } - /* Turn on camera */ - if (power_save) { - i = pwc_camera_power(pdev, 1); - if (i < 0) - PWC_DEBUG_OPEN("Failed to restore power to the camera! (%d)\n", i); - } - /* Set LED on/off time */ - if (pwc_set_leds(pdev, led_on, led_off) < 0) - PWC_DEBUG_OPEN("Failed to set LED on/off time.\n"); - + /* Turn on camera and set LEDS on */ + pwc_camera_power(pdev, 1); + pwc_set_leds(pdev, led_on, led_off); /* So far, so good. Allocate memory. */ i = pwc_allocate_buffers(pdev); @@ -756,7 +748,6 @@ static int pwc_video_open(struct file *file) /* Reset buffers & parameters */ pdev->visoc_errors = 0; - pwc_construct(pdev); /* set min/max sizes correct */ /* Set some defaults */ pdev->vsnapshot = 0; @@ -815,7 +806,6 @@ static int pwc_video_close(struct file *file) { struct video_device *vdev = file->private_data; struct pwc_device *pdev; - int i; PWC_DEBUG_OPEN(">> video_close called(vdev = 0x%p).\n", vdev); @@ -833,14 +823,8 @@ static int pwc_video_close(struct file *file) /* Turn off LEDS and power down camera, but only when not unplugged */ if (pdev->udev) { - /* Turn LEDs off */ - if (pwc_set_leds(pdev, 0, 0) < 0) - PWC_DEBUG_MODULE("Failed to set LED on/off time.\n"); - if (power_save) { - i = pwc_camera_power(pdev, 0); - if (i < 0) - PWC_ERROR("Failed to power down camera (%d)\n", i); - } + pwc_set_leds(pdev, 0, 0); + pwc_camera_power(pdev, 0); pdev->vopen--; PWC_DEBUG_OPEN("<< video_close() vopen=%d\n", pdev->vopen); } @@ -1016,6 +1000,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id int hint, rc; int features = 0; int video_nr = -1; /* default: use next available device */ + int my_power_save = power_save; char serial_number[30], *name; vendor_id = le16_to_cpu(udev->descriptor.idVendor); @@ -1133,7 +1118,8 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id PWC_INFO("Logitech QuickCam Zoom (new model) USB webcam detected.\n"); name = "Logitech QuickCam Zoom"; type_id = 740; /* CCD sensor */ - power_save = 1; + if (my_power_save == -1) + my_power_save = 1; break; case 0x08b5: PWC_INFO("Logitech QuickCam Orbit/Sphere USB webcam detected.\n"); @@ -1250,6 +1236,9 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id else return -ENODEV; /* Not any of the know types; but the list keeps growing. */ + if (my_power_save == -1) + my_power_save = 0; + memset(serial_number, 0, 30); usb_string(udev, udev->descriptor.iSerialNumber, serial_number, 29); PWC_DEBUG_PROBE("Device serial number is %s\n", serial_number); @@ -1278,6 +1267,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id pdev->angle_range.tilt_min = -3000; pdev->angle_range.tilt_max = 2500; } + pwc_construct(pdev); /* set min/max sizes correct */ mutex_init(&pdev->modlock); spin_lock_init(&pdev->queued_bufs_lock); @@ -1285,6 +1275,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id pdev->udev = udev; pdev->vcompression = pwc_preferred_compression; + pdev->power_save = my_power_save; /* Init videobuf2 queue structure */ memset(&pdev->vb_queue, 0, sizeof(pdev->vb_queue)); @@ -1424,7 +1415,7 @@ module_param(fps, int, 0444); #ifdef CONFIG_USB_PWC_DEBUG module_param_named(trace, pwc_trace, int, 0644); #endif -module_param(power_save, int, 0444); +module_param(power_save, int, 0644); module_param(compression, int, 0444); module_param_array(leds, int, &leds_nargs, 0444); module_param_array(dev_hint, charp, &dev_hint_nargs, 0444); @@ -1434,7 +1425,7 @@ MODULE_PARM_DESC(fps, "Initial frames per second. Varies with model, useful rang #ifdef CONFIG_USB_PWC_DEBUG MODULE_PARM_DESC(trace, "For debugging purposes"); #endif -MODULE_PARM_DESC(power_save, "Turn power save feature in camera on or off"); +MODULE_PARM_DESC(power_save, "Turn power saving for new cameras on or off"); MODULE_PARM_DESC(compression, "Preferred compression quality. Range 0 (uncompressed) to 3 (high compression)"); MODULE_PARM_DESC(leds, "LED on,off time in milliseconds"); MODULE_PARM_DESC(dev_hint, "Device node hints"); @@ -1491,8 +1482,6 @@ static int __init usb_pwc_init(void) pwc_preferred_compression = compression; PWC_DEBUG_MODULE("Preferred compression set to %d.\n", pwc_preferred_compression); } - if (power_save) - PWC_DEBUG_MODULE("Enabling power save on open/close.\n"); if (leds[0] >= 0) led_on = leds[0]; if (leds[1] >= 0) |