diff options
Diffstat (limited to 'drivers/media/video/tuner-xc2028-types.h')
-rw-r--r-- | drivers/media/video/tuner-xc2028-types.h | 141 |
1 files changed, 0 insertions, 141 deletions
diff --git a/drivers/media/video/tuner-xc2028-types.h b/drivers/media/video/tuner-xc2028-types.h deleted file mode 100644 index 74dc46a..0000000 --- a/drivers/media/video/tuner-xc2028-types.h +++ /dev/null @@ -1,141 +0,0 @@ -/* tuner-xc2028_types - * - * This file includes internal tipes to be used inside tuner-xc2028. - * Shouldn't be included outside tuner-xc2028 - * - * Copyright (c) 2007-2008 Mauro Carvalho Chehab (mchehab@infradead.org) - * This code is placed under the terms of the GNU General Public License v2 - */ - -/* xc3028 firmware types */ - -/* BASE firmware should be loaded before any other firmware */ -#define BASE (1<<0) -#define BASE_TYPES (BASE|F8MHZ|MTS|FM|INPUT1|INPUT2|INIT1) - -/* F8MHZ marks BASE firmwares for 8 MHz Bandwidth */ -#define F8MHZ (1<<1) - -/* Multichannel Television Sound (MTS) - Those firmwares are capable of using xc2038 DSP to decode audio and - produce a baseband audio output on some pins of the chip. - There are MTS firmwares for the most used video standards. It should be - required to use MTS firmwares, depending on the way audio is routed into - the bridge chip - */ -#define MTS (1<<2) - -/* FIXME: I have no idea what's the difference between - D2620 and D2633 firmwares - */ -#define D2620 (1<<3) -#define D2633 (1<<4) - -/* DTV firmwares for 6, 7 and 8 MHz - DTV6 - 6MHz - ATSC/DVB-C/DVB-T/ISDB-T/DOCSIS - DTV8 - 8MHz - DVB-C/DVB-T - */ -#define DTV6 (1 << 5) -#define QAM (1 << 6) -#define DTV7 (1<<7) -#define DTV78 (1<<8) -#define DTV8 (1<<9) - -#define DTV_TYPES (D2620|D2633|DTV6|QAM|DTV7|DTV78|DTV8|ATSC) - -/* There's a FM | BASE firmware + FM specific firmware (std=0) */ -#define FM (1<<10) - -#define STD_SPECIFIC_TYPES (MTS|FM|LCD|NOGD) - -/* Applies only for FM firmware - Makes it use RF input 1 (pin #2) instead of input 2 (pin #4) - */ -#define INPUT1 (1<<11) - - -/* LCD firmwares exist only for MTS STD/MN (PAL or NTSC/M) - and for non-MTS STD/MN (PAL, NTSC/M or NTSC/Kr) - There are variants both with and without NOGD - Those firmwares produce better result with LCD displays - */ -#define LCD (1<<12) - -/* NOGD firmwares exist only for MTS STD/MN (PAL or NTSC/M) - and for non-MTS STD/MN (PAL, NTSC/M or NTSC/Kr) - The NOGD firmwares don't have group delay compensation filter - */ -#define NOGD (1<<13) - -/* Old firmwares were broken into init0 and init1 */ -#define INIT1 (1<<14) - -/* SCODE firmware selects particular behaviours */ -#define MONO (1 << 15) -#define ATSC (1 << 16) -#define IF (1 << 17) -#define LG60 (1 << 18) -#define ATI638 (1 << 19) -#define OREN538 (1 << 20) -#define OREN36 (1 << 21) -#define TOYOTA388 (1 << 22) -#define TOYOTA794 (1 << 23) -#define DIBCOM52 (1 << 24) -#define ZARLINK456 (1 << 25) -#define CHINA (1 << 26) -#define F6MHZ (1 << 27) -#define INPUT2 (1 << 28) -#define SCODE (1 << 29) - -/* This flag identifies that the scode table has a new format */ -#define HAS_IF (1 << 30) - -/* There are different scode tables for MTS and non-MTS. - The MTS firmwares support mono only - */ -#define SCODE_TYPES (SCODE | MTS) - - -/* Newer types not defined on videodev2.h. - The original idea were to move all those types to videodev2.h, but - it seemed overkill, since, with the exception of SECAM/K3, the other - types seem to be autodetected. - It is not clear where secam/k3 is used, nor we have a feedback of this - working or being autodetected by the standard secam firmware. - */ - -#define V4L2_STD_SECAM_K3 (0x04000000) - -/* Audio types */ - -#define V4L2_STD_A2_A (1LL<<32) -#define V4L2_STD_A2_B (1LL<<33) -#define V4L2_STD_NICAM_A (1LL<<34) -#define V4L2_STD_NICAM_B (1LL<<35) -#define V4L2_STD_AM (1LL<<36) -#define V4L2_STD_BTSC (1LL<<37) -#define V4L2_STD_EIAJ (1LL<<38) - -#define V4L2_STD_A2 (V4L2_STD_A2_A | V4L2_STD_A2_B) -#define V4L2_STD_NICAM (V4L2_STD_NICAM_A | V4L2_STD_NICAM_B) - -/* To preserve backward compatibilty, - (std & V4L2_STD_AUDIO) = 0 means that ALL audio stds are supported - */ - -#define V4L2_STD_AUDIO (V4L2_STD_A2 | \ - V4L2_STD_NICAM | \ - V4L2_STD_AM | \ - V4L2_STD_BTSC | \ - V4L2_STD_EIAJ) - -/* Used standards with audio restrictions */ - -#define V4L2_STD_PAL_BG_A2_A (V4L2_STD_PAL_BG | V4L2_STD_A2_A) -#define V4L2_STD_PAL_BG_A2_B (V4L2_STD_PAL_BG | V4L2_STD_A2_B) -#define V4L2_STD_PAL_BG_NICAM_A (V4L2_STD_PAL_BG | V4L2_STD_NICAM_A) -#define V4L2_STD_PAL_BG_NICAM_B (V4L2_STD_PAL_BG | V4L2_STD_NICAM_B) -#define V4L2_STD_PAL_DK_A2 (V4L2_STD_PAL_DK | V4L2_STD_A2) -#define V4L2_STD_PAL_DK_NICAM (V4L2_STD_PAL_DK | V4L2_STD_NICAM) -#define V4L2_STD_SECAM_L_NICAM (V4L2_STD_SECAM_L | V4L2_STD_NICAM) -#define V4L2_STD_SECAM_L_AM (V4L2_STD_SECAM_L | V4L2_STD_AM) |