diff options
Diffstat (limited to 'drivers/mfd/wm8994-regmap.c')
| -rw-r--r-- | drivers/mfd/wm8994-regmap.c | 20 |
1 files changed, 2 insertions, 18 deletions
diff --git a/drivers/mfd/wm8994-regmap.c b/drivers/mfd/wm8994-regmap.c index 7605b60..bfd25af 100644 --- a/drivers/mfd/wm8994-regmap.c +++ b/drivers/mfd/wm8994-regmap.c @@ -20,7 +20,6 @@ #include "wm8994.h" static struct reg_default wm1811_defaults[] = { - { 0x0000, 0x1811 }, /* R0 - Software Reset */ { 0x0001, 0x0000 }, /* R1 - Power Management (1) */ { 0x0002, 0x6000 }, /* R2 - Power Management (2) */ { 0x0003, 0x0000 }, /* R3 - Power Management (3) */ @@ -61,7 +60,7 @@ static struct reg_default wm1811_defaults[] = { { 0x0036, 0x0000 }, /* R54 - Speaker Mixer */ { 0x0037, 0x0000 }, /* R55 - Additional Control */ { 0x0038, 0x0000 }, /* R56 - AntiPOP (1) */ - { 0x0039, 0x0180 }, /* R57 - AntiPOP (2) */ + { 0x0039, 0x0000 }, /* R57 - AntiPOP (2) */ { 0x003B, 0x000D }, /* R59 - LDO 1 */ { 0x003C, 0x0003 }, /* R60 - LDO 2 */ { 0x003D, 0x0039 }, /* R61 - MICBIAS1 */ @@ -69,16 +68,12 @@ static struct reg_default wm1811_defaults[] = { { 0x004C, 0x1F25 }, /* R76 - Charge Pump (1) */ { 0x004D, 0xAB19 }, /* R77 - Charge Pump (2) */ { 0x0051, 0x0004 }, /* R81 - Class W (1) */ - { 0x0054, 0x0000 }, /* R84 - DC Servo (1) */ { 0x0055, 0x054A }, /* R85 - DC Servo (2) */ - { 0x0058, 0x0000 }, /* R88 - DC Servo Readback */ { 0x0059, 0x0000 }, /* R89 - DC Servo (4) */ { 0x0060, 0x0000 }, /* R96 - Analogue HP (1) */ { 0x00C5, 0x0000 }, /* R197 - Class D Test (5) */ { 0x00D0, 0x7600 }, /* R208 - Mic Detect 1 */ { 0x00D1, 0x007F }, /* R209 - Mic Detect 2 */ - { 0x00D2, 0x0000 }, /* R210 - Mic Detect 3 */ - { 0x0100, 0x0100 }, /* R256 - Chip Revision */ { 0x0101, 0x8004 }, /* R257 - Control Interface */ { 0x0200, 0x0000 }, /* R512 - AIF1 Clocking (1) */ { 0x0201, 0x0000 }, /* R513 - AIF1 Clocking (2) */ @@ -88,7 +83,6 @@ static struct reg_default wm1811_defaults[] = { { 0x0209, 0x0000 }, /* R521 - Clocking (2) */ { 0x0210, 0x0083 }, /* R528 - AIF1 Rate */ { 0x0211, 0x0083 }, /* R529 - AIF2 Rate */ - { 0x0212, 0x0000 }, /* R530 - Rate Status */ { 0x0220, 0x0000 }, /* R544 - FLL1 Control (1) */ { 0x0221, 0x0000 }, /* R545 - FLL1 Control (2) */ { 0x0222, 0x0000 }, /* R546 - FLL1 Control (3) */ @@ -218,8 +212,6 @@ static struct reg_default wm1811_defaults[] = { { 0x070A, 0xA101 }, /* R1802 - GPIO 11 */ { 0x0720, 0x0000 }, /* R1824 - Pull Control (1) */ { 0x0721, 0x0156 }, /* R1825 - Pull Control (2) */ - { 0x0730, 0x0000 }, /* R1840 - Interrupt Status 1 */ - { 0x0731, 0x0000 }, /* R1841 - Interrupt Status 2 */ { 0x0732, 0x0000 }, /* R1842 - Interrupt Raw Status 2 */ { 0x0738, 0x07FF }, /* R1848 - Interrupt Status 1 Mask */ { 0x0739, 0xDFEF }, /* R1849 - Interrupt Status 2 Mask */ @@ -228,7 +220,6 @@ static struct reg_default wm1811_defaults[] = { }; static struct reg_default wm8994_defaults[] = { - { 0x0000, 0x8994 }, /* R0 - Software Reset */ { 0x0001, 0x0000 }, /* R1 - Power Management (1) */ { 0x0002, 0x6000 }, /* R2 - Power Management (2) */ { 0x0003, 0x0000 }, /* R3 - Power Management (3) */ @@ -275,12 +266,9 @@ static struct reg_default wm8994_defaults[] = { { 0x003C, 0x0003 }, /* R60 - LDO 2 */ { 0x004C, 0x1F25 }, /* R76 - Charge Pump (1) */ { 0x0051, 0x0004 }, /* R81 - Class W (1) */ - { 0x0054, 0x0000 }, /* R84 - DC Servo (1) */ { 0x0055, 0x054A }, /* R85 - DC Servo (2) */ { 0x0057, 0x0000 }, /* R87 - DC Servo (4) */ - { 0x0058, 0x0000 }, /* R88 - DC Servo Readback */ { 0x0060, 0x0000 }, /* R96 - Analogue HP (1) */ - { 0x0100, 0x0003 }, /* R256 - Chip Revision */ { 0x0101, 0x8004 }, /* R257 - Control Interface */ { 0x0110, 0x0000 }, /* R272 - Write Sequencer Ctrl (1) */ { 0x0111, 0x0000 }, /* R273 - Write Sequencer Ctrl (2) */ @@ -292,7 +280,6 @@ static struct reg_default wm8994_defaults[] = { { 0x0209, 0x0000 }, /* R521 - Clocking (2) */ { 0x0210, 0x0083 }, /* R528 - AIF1 Rate */ { 0x0211, 0x0083 }, /* R529 - AIF2 Rate */ - { 0x0212, 0x0000 }, /* R530 - Rate Status */ { 0x0220, 0x0000 }, /* R544 - FLL1 Control (1) */ { 0x0221, 0x0000 }, /* R545 - FLL1 Control (2) */ { 0x0222, 0x0000 }, /* R546 - FLL1 Control (3) */ @@ -445,9 +432,6 @@ static struct reg_default wm8994_defaults[] = { { 0x070A, 0xA101 }, /* R1802 - GPIO 11 */ { 0x0720, 0x0000 }, /* R1824 - Pull Control (1) */ { 0x0721, 0x0156 }, /* R1825 - Pull Control (2) */ - { 0x0730, 0x0000 }, /* R1840 - Interrupt Status 1 */ - { 0x0731, 0x0000 }, /* R1841 - Interrupt Status 2 */ - { 0x0732, 0x0000 }, /* R1842 - Interrupt Raw Status 2 */ { 0x0738, 0x07FF }, /* R1848 - Interrupt Status 1 Mask */ { 0x0739, 0xFFFF }, /* R1849 - Interrupt Status 2 Mask */ { 0x0740, 0x0000 }, /* R1856 - Interrupt Control */ @@ -455,7 +439,6 @@ static struct reg_default wm8994_defaults[] = { }; static struct reg_default wm8958_defaults[] = { - { 0x0000, 0x8958 }, /* R0 - Software Reset */ { 0x0001, 0x0000 }, /* R1 - Power Management (1) */ { 0x0002, 0x6000 }, /* R2 - Power Management (2) */ { 0x0003, 0x0000 }, /* R3 - Power Management (3) */ @@ -970,6 +953,7 @@ static bool wm8994_readable_register(struct device *dev, unsigned int reg) { switch (reg) { case WM8994_DC_SERVO_READBACK: + case WM8994_MICBIAS: case WM8994_WRITE_SEQUENCER_CTRL_1: case WM8994_WRITE_SEQUENCER_CTRL_2: case WM8994_AIF1_ADC2_LEFT_VOLUME: |