diff options
Diffstat (limited to 'drivers/mmc/core/core.c')
-rw-r--r-- | drivers/mmc/core/core.c | 206 |
1 files changed, 122 insertions, 84 deletions
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index a3a780f..6625c05 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -22,6 +22,7 @@ #include <linux/scatterlist.h> #include <linux/log2.h> #include <linux/regulator/consumer.h> +#include <linux/pm_runtime.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h> @@ -130,6 +131,8 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq) if (mrq->done) mrq->done(mrq); + + mmc_host_clk_gate(host); } } @@ -190,6 +193,7 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) mrq->stop->mrq = mrq; } } + mmc_host_clk_ungate(host); host->ops->request(host, mrq); } @@ -295,8 +299,9 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) unsigned int timeout_us, limit_us; timeout_us = data->timeout_ns / 1000; - timeout_us += data->timeout_clks * 1000 / - (card->host->ios.clock / 1000); + if (mmc_host_clk_rate(card->host)) + timeout_us += data->timeout_clks * 1000 / + (mmc_host_clk_rate(card->host) / 1000); if (data->flags & MMC_DATA_WRITE) /* @@ -614,6 +619,8 @@ static inline void mmc_set_ios(struct mmc_host *host) ios->power_mode, ios->chip_select, ios->vdd, ios->bus_width, ios->timing); + if (ios->clock > 0) + mmc_set_ungated(host); host->ops->set_ios(host, ios); } @@ -641,6 +648,61 @@ void mmc_set_clock(struct mmc_host *host, unsigned int hz) mmc_set_ios(host); } +#ifdef CONFIG_MMC_CLKGATE +/* + * This gates the clock by setting it to 0 Hz. + */ +void mmc_gate_clock(struct mmc_host *host) +{ + unsigned long flags; + + spin_lock_irqsave(&host->clk_lock, flags); + host->clk_old = host->ios.clock; + host->ios.clock = 0; + host->clk_gated = true; + spin_unlock_irqrestore(&host->clk_lock, flags); + mmc_set_ios(host); +} + +/* + * This restores the clock from gating by using the cached + * clock value. + */ +void mmc_ungate_clock(struct mmc_host *host) +{ + /* + * We should previously have gated the clock, so the clock shall + * be 0 here! The clock may however be 0 during initialization, + * when some request operations are performed before setting + * the frequency. When ungate is requested in that situation + * we just ignore the call. + */ + if (host->clk_old) { + BUG_ON(host->ios.clock); + /* This call will also set host->clk_gated to false */ + mmc_set_clock(host, host->clk_old); + } +} + +void mmc_set_ungated(struct mmc_host *host) +{ + unsigned long flags; + + /* + * We've been given a new frequency while the clock is gated, + * so make sure we regard this as ungating it. + */ + spin_lock_irqsave(&host->clk_lock, flags); + host->clk_gated = false; + spin_unlock_irqrestore(&host->clk_lock, flags); +} + +#else +void mmc_set_ungated(struct mmc_host *host) +{ +} +#endif + /* * Change the bus mode (open drain/push-pull) of a host. */ @@ -1424,35 +1486,57 @@ int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen) } EXPORT_SYMBOL(mmc_set_blocklen); +static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq) +{ + host->f_init = freq; + +#ifdef CONFIG_MMC_DEBUG + pr_info("%s: %s: trying to init card at %u Hz\n", + mmc_hostname(host), __func__, host->f_init); +#endif + mmc_power_up(host); + sdio_reset(host); + mmc_go_idle(host); + + mmc_send_if_cond(host, host->ocr_avail); + + /* Order's important: probe SDIO, then SD, then MMC */ + if (!mmc_attach_sdio(host)) + return 0; + if (!mmc_attach_sd(host)) + return 0; + if (!mmc_attach_mmc(host)) + return 0; + + mmc_power_off(host); + return -EIO; +} + void mmc_rescan(struct work_struct *work) { + static const unsigned freqs[] = { 400000, 300000, 200000, 100000 }; struct mmc_host *host = container_of(work, struct mmc_host, detect.work); - u32 ocr; - int err; - unsigned long flags; int i; - const unsigned freqs[] = { 400000, 300000, 200000, 100000 }; - - spin_lock_irqsave(&host->lock, flags); - if (host->rescan_disable) { - spin_unlock_irqrestore(&host->lock, flags); + if (host->rescan_disable) return; - } - - spin_unlock_irqrestore(&host->lock, flags); - mmc_bus_get(host); - /* if there is a card registered, check whether it is still present */ - if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead) + /* + * if there is a _removable_ card registered, check whether it is + * still present + */ + if (host->bus_ops && host->bus_ops->detect && !host->bus_dead + && mmc_card_is_removable(host)) host->bus_ops->detect(host); + /* + * Let mmc_bus_put() free the bus/bus_ops if we've found that + * the card is no longer present. + */ mmc_bus_put(host); - - mmc_bus_get(host); /* if there still is a card present, stop here */ @@ -1461,8 +1545,6 @@ void mmc_rescan(struct work_struct *work) goto out; } - /* detect a newly inserted card */ - /* * Only we can add a new handler, so it's safe to * release the lock here. @@ -1472,72 +1554,16 @@ void mmc_rescan(struct work_struct *work) if (host->ops->get_cd && host->ops->get_cd(host) == 0) goto out; + mmc_claim_host(host); for (i = 0; i < ARRAY_SIZE(freqs); i++) { - mmc_claim_host(host); - - if (freqs[i] >= host->f_min) - host->f_init = freqs[i]; - else if (!i || freqs[i-1] > host->f_min) - host->f_init = host->f_min; - else { - mmc_release_host(host); - goto out; - } -#ifdef CONFIG_MMC_DEBUG - pr_info("%s: %s: trying to init card at %u Hz\n", - mmc_hostname(host), __func__, host->f_init); -#endif - mmc_power_up(host); - sdio_reset(host); - mmc_go_idle(host); - - mmc_send_if_cond(host, host->ocr_avail); - - /* - * First we search for SDIO... - */ - err = mmc_send_io_op_cond(host, 0, &ocr); - if (!err) { - if (mmc_attach_sdio(host, ocr)) { - mmc_claim_host(host); - /* - * Try SDMEM (but not MMC) even if SDIO - * is broken. - */ - if (mmc_send_app_op_cond(host, 0, &ocr)) - goto out_fail; - - if (mmc_attach_sd(host, ocr)) - mmc_power_off(host); - } - goto out; - } - - /* - * ...then normal SD... - */ - err = mmc_send_app_op_cond(host, 0, &ocr); - if (!err) { - if (mmc_attach_sd(host, ocr)) - mmc_power_off(host); - goto out; - } - - /* - * ...and finally MMC. - */ - err = mmc_send_op_cond(host, 0, &ocr); - if (!err) { - if (mmc_attach_mmc(host, ocr)) - mmc_power_off(host); - goto out; - } - -out_fail: - mmc_release_host(host); - mmc_power_off(host); + if (!mmc_rescan_try_freq(host, max(freqs[i], host->f_min))) + break; + if (freqs[i] < host->f_min) + break; } -out: + mmc_release_host(host); + + out: if (host->caps & MMC_CAP_NEEDS_POLL) mmc_schedule_delayed_work(&host->detect, HZ); } @@ -1721,6 +1747,18 @@ int mmc_resume_host(struct mmc_host *host) if (!(host->pm_flags & MMC_PM_KEEP_POWER)) { mmc_power_up(host); mmc_select_voltage(host, host->ocr); + /* + * Tell runtime PM core we just powered up the card, + * since it still believes the card is powered off. + * Note that currently runtime PM is only enabled + * for SDIO cards that are MMC_CAP_POWER_OFF_CARD + */ + if (mmc_card_sdio(host->card) && + (host->caps & MMC_CAP_POWER_OFF_CARD)) { + pm_runtime_disable(&host->card->dev); + pm_runtime_set_active(&host->card->dev); + pm_runtime_enable(&host->card->dev); + } } BUG_ON(!host->bus_ops->resume); err = host->bus_ops->resume(host); |