diff options
Diffstat (limited to 'drivers/mmc/core/sdio.c')
| -rw-r--r-- | drivers/mmc/core/sdio.c | 15 |
1 files changed, 12 insertions, 3 deletions
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index bd7bacc..2c7c83f 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -98,10 +98,11 @@ fail: return ret; } -static int sdio_read_cccr(struct mmc_card *card) +static int sdio_read_cccr(struct mmc_card *card, u32 ocr) { int ret; int cccr_vsn; + int uhs = ocr & R4_18V_PRESENT; unsigned char data; unsigned char speed; @@ -149,7 +150,7 @@ static int sdio_read_cccr(struct mmc_card *card) card->scr.sda_spec3 = 0; card->sw_caps.sd3_bus_mode = 0; card->sw_caps.sd3_drv_type = 0; - if (cccr_vsn >= SDIO_CCCR_REV_3_00) { + if (cccr_vsn >= SDIO_CCCR_REV_3_00 && uhs) { card->scr.sda_spec3 = 1; ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_UHS, 0, &data); @@ -584,6 +585,9 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, * Inform the card of the voltage */ if (!powered_resume) { + /* The initialization should be done at 3.3 V I/O voltage. */ + mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0); + err = mmc_send_io_op_cond(host, host->ocr, &ocr); if (err) goto err; @@ -712,7 +716,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, /* * Read the common registers. */ - err = sdio_read_cccr(card); + err = sdio_read_cccr(card, ocr); if (err) goto remove; @@ -995,6 +999,11 @@ static int mmc_sdio_power_restore(struct mmc_host *host) * With these steps taken, mmc_select_voltage() is also required to * restore the correct voltage setting of the card. */ + + /* The initialization should be done at 3.3 V I/O voltage. */ + if (!mmc_card_keep_power(host)) + mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0); + sdio_reset(host); mmc_go_idle(host); mmc_send_if_cond(host, host->ocr_avail); |