diff options
Diffstat (limited to 'drivers/mmc/wbsd.c')
| -rw-r--r-- | drivers/mmc/wbsd.c | 102 |
1 files changed, 66 insertions, 36 deletions
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c index 7a28267..a44d877 100644 --- a/drivers/mmc/wbsd.c +++ b/drivers/mmc/wbsd.c @@ -1,7 +1,7 @@ /* * linux/drivers/mmc/wbsd.c - Winbond W83L51xD SD/MMC driver * - * Copyright (C) 2004-2005 Pierre Ossman, All Rights Reserved. + * Copyright (C) 2004-2006 Pierre Ossman, All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -272,16 +272,9 @@ static inline int wbsd_next_sg(struct wbsd_host *host) return host->num_sg; } -static inline char *wbsd_kmap_sg(struct wbsd_host *host) +static inline char *wbsd_sg_to_buffer(struct wbsd_host *host) { - host->mapped_sg = kmap_atomic(host->cur_sg->page, KM_BIO_SRC_IRQ) + - host->cur_sg->offset; - return host->mapped_sg; -} - -static inline void wbsd_kunmap_sg(struct wbsd_host *host) -{ - kunmap_atomic(host->mapped_sg, KM_BIO_SRC_IRQ); + return page_address(host->cur_sg->page) + host->cur_sg->offset; } static inline void wbsd_sg_to_dma(struct wbsd_host *host, struct mmc_data *data) @@ -302,12 +295,11 @@ static inline void wbsd_sg_to_dma(struct wbsd_host *host, struct mmc_data *data) * we do not transfer too much. */ for (i = 0; i < len; i++) { - sgbuf = kmap_atomic(sg[i].page, KM_BIO_SRC_IRQ) + sg[i].offset; + sgbuf = page_address(sg[i].page) + sg[i].offset; if (size < sg[i].length) memcpy(dmabuf, sgbuf, size); else memcpy(dmabuf, sgbuf, sg[i].length); - kunmap_atomic(sgbuf, KM_BIO_SRC_IRQ); dmabuf += sg[i].length; if (size < sg[i].length) @@ -347,7 +339,7 @@ static inline void wbsd_dma_to_sg(struct wbsd_host *host, struct mmc_data *data) * we do not transfer too much. */ for (i = 0; i < len; i++) { - sgbuf = kmap_atomic(sg[i].page, KM_BIO_SRC_IRQ) + sg[i].offset; + sgbuf = page_address(sg[i].page) + sg[i].offset; if (size < sg[i].length) memcpy(sgbuf, dmabuf, size); else @@ -497,7 +489,7 @@ static void wbsd_empty_fifo(struct wbsd_host *host) if (data->bytes_xfered == host->size) return; - buffer = wbsd_kmap_sg(host) + host->offset; + buffer = wbsd_sg_to_buffer(host) + host->offset; /* * Drain the fifo. This has a tendency to loop longer @@ -526,17 +518,13 @@ static void wbsd_empty_fifo(struct wbsd_host *host) /* * Transfer done? */ - if (data->bytes_xfered == host->size) { - wbsd_kunmap_sg(host); + if (data->bytes_xfered == host->size) return; - } /* * End of scatter list entry? */ if (host->remain == 0) { - wbsd_kunmap_sg(host); - /* * Get next entry. Check if last. */ @@ -554,13 +542,11 @@ static void wbsd_empty_fifo(struct wbsd_host *host) return; } - buffer = wbsd_kmap_sg(host); + buffer = wbsd_sg_to_buffer(host); } } } - wbsd_kunmap_sg(host); - /* * This is a very dirty hack to solve a * hardware problem. The chip doesn't trigger @@ -583,7 +569,7 @@ static void wbsd_fill_fifo(struct wbsd_host *host) if (data->bytes_xfered == host->size) return; - buffer = wbsd_kmap_sg(host) + host->offset; + buffer = wbsd_sg_to_buffer(host) + host->offset; /* * Fill the fifo. This has a tendency to loop longer @@ -612,17 +598,13 @@ static void wbsd_fill_fifo(struct wbsd_host *host) /* * Transfer done? */ - if (data->bytes_xfered == host->size) { - wbsd_kunmap_sg(host); + if (data->bytes_xfered == host->size) return; - } /* * End of scatter list entry? */ if (host->remain == 0) { - wbsd_kunmap_sg(host); - /* * Get next entry. Check if last. */ @@ -640,13 +622,11 @@ static void wbsd_fill_fifo(struct wbsd_host *host) return; } - buffer = wbsd_kmap_sg(host); + buffer = wbsd_sg_to_buffer(host); } } } - wbsd_kunmap_sg(host); - /* * The controller stops sending interrupts for * 'FIFO empty' under certain conditions. So we @@ -910,6 +890,45 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq) */ if (cmd->data && (cmd->error == MMC_ERR_NONE)) { /* + * The hardware is so delightfully stupid that it has a list + * of "data" commands. If a command isn't on this list, it'll + * just go back to the idle state and won't send any data + * interrupts. + */ + switch (cmd->opcode) { + case 11: + case 17: + case 18: + case 20: + case 24: + case 25: + case 26: + case 27: + case 30: + case 42: + case 56: + break; + + /* ACMDs. We don't keep track of state, so we just treat them + * like any other command. */ + case 51: + break; + + default: +#ifdef CONFIG_MMC_DEBUG + printk(KERN_WARNING "%s: Data command %d is not " + "supported by this controller.\n", + mmc_hostname(host->mmc), cmd->opcode); +#endif + cmd->data->error = MMC_ERR_INVALID; + + if (cmd->data->stop) + wbsd_send_command(host, cmd->data->stop); + + goto done; + }; + + /* * Dirty fix for hardware bug. */ if (host->dma == -1) @@ -1343,16 +1362,27 @@ static int __devinit wbsd_alloc_mmc(struct device *dev) mmc->max_phys_segs = 128; /* - * Maximum number of sectors in one transfer. Also limited by 64kB - * buffer. + * Maximum request size. Also limited by 64KiB buffer. */ - mmc->max_sectors = 128; + mmc->max_req_size = 65536; /* * Maximum segment size. Could be one segment with the maximum number - * of segments. + * of bytes. + */ + mmc->max_seg_size = mmc->max_req_size; + + /* + * Maximum block size. We have 12 bits (= 4095) but have to subtract + * space for CRC. So the maximum is 4095 - 4*2 = 4087. + */ + mmc->max_blk_size = 4087; + + /* + * Maximum block count. There is no real limit so the maximum + * request size will be the only restriction. */ - mmc->max_seg_size = mmc->max_sectors * 512; + mmc->max_blk_count = mmc->max_req_size; dev_set_drvdata(dev, mmc); |