summaryrefslogtreecommitdiff
path: root/drivers/mtd/devices/m25p80.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/devices/m25p80.c')
-rw-r--r--drivers/mtd/devices/m25p80.c81
1 files changed, 60 insertions, 21 deletions
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 2f3d2a5..26b14f9 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -43,17 +43,24 @@
#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */
#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */
#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */
+#define OPCODE_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */
#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */
#define OPCODE_CHIP_ERASE 0xc7 /* Erase whole flash chip */
#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */
#define OPCODE_RDID 0x9f /* Read JEDEC ID */
+/* 4-byte address opcodes - used on Spansion and some Macronix flashes. */
+#define OPCODE_NORM_READ_4B 0x13 /* Read data bytes (low frequency) */
+#define OPCODE_FAST_READ_4B 0x0c /* Read data bytes (high frequency) */
+#define OPCODE_PP_4B 0x12 /* Page program (up to 256 bytes) */
+#define OPCODE_SE_4B 0xdc /* Sector erase (usually 64KiB) */
+
/* Used for SST flashes only. */
#define OPCODE_BP 0x02 /* Byte program */
#define OPCODE_WRDI 0x04 /* Write disable */
#define OPCODE_AAI_WP 0xad /* Auto address increment word program */
-/* Used for Macronix flashes only. */
+/* Used for Macronix and Winbond flashes. */
#define OPCODE_EN4B 0xb7 /* Enter 4-byte mode */
#define OPCODE_EX4B 0xe9 /* Exit 4-byte mode */
@@ -84,6 +91,8 @@ struct m25p {
u16 page_size;
u16 addr_width;
u8 erase_opcode;
+ u8 read_opcode;
+ u8 program_opcode;
u8 *command;
bool fast_read;
};
@@ -161,6 +170,7 @@ static inline int set_4byte(struct m25p *flash, u32 jedec_id, int enable)
{
switch (JEDEC_MFR(jedec_id)) {
case CFI_MFR_MACRONIX:
+ case CFI_MFR_ST: /* Micron, actually */
case 0xEF /* winbond */:
flash->command[0] = enable ? OPCODE_EN4B : OPCODE_EX4B;
return spi_write(flash->spi, flash->command, 1);
@@ -371,7 +381,7 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
*/
/* Set up the write data buffer. */
- opcode = flash->fast_read ? OPCODE_FAST_READ : OPCODE_NORM_READ;
+ opcode = flash->read_opcode;
flash->command[0] = opcode;
m25p_addr2cmd(flash, from, flash->command);
@@ -422,7 +432,7 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
write_enable(flash);
/* Set up the opcode in the write buffer. */
- flash->command[0] = OPCODE_PP;
+ flash->command[0] = flash->program_opcode;
m25p_addr2cmd(flash, to, flash->command);
page_offset = to & (flash->page_size - 1);
@@ -682,6 +692,8 @@ struct flash_info {
#define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly */
#define M25P_NO_ERASE 0x02 /* No erase command needed */
#define SST_WRITE 0x04 /* use SST byte programming */
+#define M25P_NO_FR 0x08 /* Can't do fastread */
+#define SECT_4K_PMC 0x10 /* OPCODE_BE_4K_PMC works uniformly */
};
#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
@@ -694,13 +706,13 @@ struct flash_info {
.flags = (_flags), \
})
-#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width) \
+#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags) \
((kernel_ulong_t)&(struct flash_info) { \
.sector_size = (_sector_size), \
.n_sectors = (_n_sectors), \
.page_size = (_page_size), \
.addr_width = (_addr_width), \
- .flags = M25P_NO_ERASE, \
+ .flags = (_flags), \
})
/* NOTE: double check command sets and memory organization when you add
@@ -732,7 +744,8 @@ static const struct spi_device_id m25p_ids[] = {
{ "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) },
/* Everspin */
- { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2) },
+ { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, M25P_NO_ERASE | M25P_NO_FR) },
+ { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, M25P_NO_ERASE | M25P_NO_FR) },
/* GigaDevice */
{ "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) },
@@ -762,6 +775,11 @@ static const struct spi_device_id m25p_ids[] = {
{ "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) },
{ "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) },
+ /* PMC */
+ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
+ { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) },
+ { "pm25lq032", INFO(0x7f9d46, 0, 64 * 1024, 64, SECT_4K) },
+
/* Spansion -- single (large) sector size only, at least
* for the chips listed here (without boot sectors).
*/
@@ -840,17 +858,18 @@ static const struct spi_device_id m25p_ids[] = {
{ "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64, SECT_4K) },
{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
+ { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
{ "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K) },
/* Catalyst / On Semiconductor -- non-JEDEC */
- { "cat25c11", CAT25_INFO( 16, 8, 16, 1) },
- { "cat25c03", CAT25_INFO( 32, 8, 16, 2) },
- { "cat25c09", CAT25_INFO( 128, 8, 32, 2) },
- { "cat25c17", CAT25_INFO( 256, 8, 32, 2) },
- { "cat25128", CAT25_INFO(2048, 8, 64, 2) },
+ { "cat25c11", CAT25_INFO( 16, 8, 16, 1, M25P_NO_ERASE | M25P_NO_FR) },
+ { "cat25c03", CAT25_INFO( 32, 8, 16, 2, M25P_NO_ERASE | M25P_NO_FR) },
+ { "cat25c09", CAT25_INFO( 128, 8, 32, 2, M25P_NO_ERASE | M25P_NO_FR) },
+ { "cat25c17", CAT25_INFO( 256, 8, 32, 2, M25P_NO_ERASE | M25P_NO_FR) },
+ { "cat25128", CAT25_INFO(2048, 8, 64, 2, M25P_NO_ERASE | M25P_NO_FR) },
{ },
};
MODULE_DEVICE_TABLE(spi, m25p_ids);
@@ -920,7 +939,7 @@ static int m25p_probe(struct spi_device *spi)
* a chip ID, try the JEDEC id commands; they'll work for most
* newer chips, even if we don't recognize the particular chip.
*/
- data = spi->dev.platform_data;
+ data = dev_get_platdata(&spi->dev);
if (data && data->type) {
const struct spi_device_id *plat_id;
@@ -972,7 +991,7 @@ static int m25p_probe(struct spi_device *spi)
flash->spi = spi;
mutex_init(&flash->lock);
- dev_set_drvdata(&spi->dev, flash);
+ spi_set_drvdata(spi, flash);
/*
* Atmel, SST and Intel/Numonyx serial flash tend to power
@@ -1014,6 +1033,9 @@ static int m25p_probe(struct spi_device *spi)
if (info->flags & SECT_4K) {
flash->erase_opcode = OPCODE_BE_4K;
flash->mtd.erasesize = 4096;
+ } else if (info->flags & SECT_4K_PMC) {
+ flash->erase_opcode = OPCODE_BE_4K_PMC;
+ flash->mtd.erasesize = 4096;
} else {
flash->erase_opcode = OPCODE_SE;
flash->mtd.erasesize = info->sector_size;
@@ -1028,24 +1050,41 @@ static int m25p_probe(struct spi_device *spi)
flash->mtd.writebufsize = flash->page_size;
flash->fast_read = false;
-#ifdef CONFIG_OF
if (np && of_property_read_bool(np, "m25p,fast-read"))
flash->fast_read = true;
-#endif
#ifdef CONFIG_M25PXX_USE_FAST_READ
flash->fast_read = true;
#endif
+ if (info->flags & M25P_NO_FR)
+ flash->fast_read = false;
+
+ /* Default commands */
+ if (flash->fast_read)
+ flash->read_opcode = OPCODE_FAST_READ;
+ else
+ flash->read_opcode = OPCODE_NORM_READ;
+
+ flash->program_opcode = OPCODE_PP;
if (info->addr_width)
flash->addr_width = info->addr_width;
- else {
+ else if (flash->mtd.size > 0x1000000) {
/* enable 4-byte addressing if the device exceeds 16MiB */
- if (flash->mtd.size > 0x1000000) {
- flash->addr_width = 4;
- set_4byte(flash, info->jedec_id, 1);
+ flash->addr_width = 4;
+ if (JEDEC_MFR(info->jedec_id) == CFI_MFR_AMD) {
+ /* Dedicated 4-byte command set */
+ flash->read_opcode = flash->fast_read ?
+ OPCODE_FAST_READ_4B :
+ OPCODE_NORM_READ_4B;
+ flash->program_opcode = OPCODE_PP_4B;
+ /* No small sector erase for 4-byte command set */
+ flash->erase_opcode = OPCODE_SE_4B;
+ flash->mtd.erasesize = info->sector_size;
} else
- flash->addr_width = 3;
+ set_4byte(flash, info->jedec_id, 1);
+ } else {
+ flash->addr_width = 3;
}
dev_info(&spi->dev, "%s (%lld Kbytes)\n", id->name,
@@ -1080,7 +1119,7 @@ static int m25p_probe(struct spi_device *spi)
static int m25p_remove(struct spi_device *spi)
{
- struct m25p *flash = dev_get_drvdata(&spi->dev);
+ struct m25p *flash = spi_get_drvdata(spi);
int status;
/* Clean up MTD stuff. */
generated by cgit v0.10.2 at 2024-08-19 10:33:55 (GMT)