diff options
Diffstat (limited to 'drivers/mtd/nand/nand_base.c')
| -rw-r--r-- | drivers/mtd/nand/nand_base.c | 480 |
1 files changed, 121 insertions, 359 deletions
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 7785350..649c238 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -139,23 +139,12 @@ static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len); static int nand_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, uint8_t *buf); -static int nand_read_ecc(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, uint8_t *buf, uint8_t *eccbuf, - struct nand_oobinfo *oobsel); static int nand_read_oob(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, uint8_t *buf); static int nand_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const uint8_t *buf); -static int nand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const uint8_t *buf, uint8_t *eccbuf, - struct nand_oobinfo *oobsel); static int nand_write_oob(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const uint8_t *buf); -static int nand_writev(struct mtd_info *mtd, const struct kvec *vecs, - unsigned long count, loff_t to, size_t *retlen); -static int nand_writev_ecc(struct mtd_info *mtd, const struct kvec *vecs, - unsigned long count, loff_t to, size_t *retlen, - uint8_t *eccbuf, struct nand_oobinfo *oobsel); static int nand_erase(struct mtd_info *mtd, struct erase_info *instr); static void nand_sync(struct mtd_info *mtd); @@ -175,6 +164,12 @@ static int nand_verify_pages(struct mtd_info *mtd, struct nand_chip *this, static int nand_get_device(struct nand_chip *this, struct mtd_info *mtd, int new_state); +/* + * For devices which display every fart in the system on a seperate LED. Is + * compiled away when LED support is disabled. + */ +DEFINE_LED_TRIGGER(nand_led_trigger); + /** * nand_release_device - [GENERIC] release chip * @mtd: MTD device structure @@ -209,19 +204,6 @@ static uint8_t nand_read_byte(struct mtd_info *mtd) } /** - * nand_write_byte - [DEFAULT] write one byte to the chip - * @mtd: MTD device structure - * @byte: pointer to data byte to write - * - * Default write function for 8it buswith - */ -static void nand_write_byte(struct mtd_info *mtd, uint8_t byte) -{ - struct nand_chip *this = mtd->priv; - writeb(byte, this->IO_ADDR_W); -} - -/** * nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip * @mtd: MTD device structure * @@ -235,20 +217,6 @@ static uint8_t nand_read_byte16(struct mtd_info *mtd) } /** - * nand_write_byte16 - [DEFAULT] write one byte endianess aware to the chip - * @mtd: MTD device structure - * @byte: pointer to data byte to write - * - * Default write function for 16bit buswith with - * endianess conversion - */ -static void nand_write_byte16(struct mtd_info *mtd, uint8_t byte) -{ - struct nand_chip *this = mtd->priv; - writew(le16_to_cpu((u16) byte), this->IO_ADDR_W); -} - -/** * nand_read_word - [DEFAULT] read one word from the chip * @mtd: MTD device structure * @@ -262,20 +230,6 @@ static u16 nand_read_word(struct mtd_info *mtd) } /** - * nand_write_word - [DEFAULT] write one word to the chip - * @mtd: MTD device structure - * @word: data word to write - * - * Default write function for 16bit buswith without - * endianess conversion - */ -static void nand_write_word(struct mtd_info *mtd, u16 word) -{ - struct nand_chip *this = mtd->priv; - writew(word, this->IO_ADDR_W); -} - -/** * nand_select_chip - [DEFAULT] control CE line * @mtd: MTD device structure * @chip: chipnumber to select, -1 for deselect @@ -287,10 +241,10 @@ static void nand_select_chip(struct mtd_info *mtd, int chip) struct nand_chip *this = mtd->priv; switch (chip) { case -1: - this->hwcontrol(mtd, NAND_CTL_CLRNCE); + this->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE); break; case 0: - this->hwcontrol(mtd, NAND_CTL_SETNCE); + this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); break; default: @@ -528,8 +482,6 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip, return nand_isbad_bbt(mtd, ofs, allowbbt); } -DEFINE_LED_TRIGGER(nand_led_trigger); - /* * Wait for the ready pin, after a command * The timeout is catched later. @@ -559,13 +511,12 @@ static void nand_wait_ready(struct mtd_info *mtd) * Send command to NAND device. This function is used for small page * devices (256/512 Bytes per page) */ -static void nand_command(struct mtd_info *mtd, unsigned command, int column, - int page_addr) +static void nand_command(struct mtd_info *mtd, unsigned int command, + int column, int page_addr) { register struct nand_chip *this = mtd->priv; + int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE; - /* Begin command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_SETCLE); /* * Write out the command to the device. */ @@ -583,33 +534,32 @@ static void nand_command(struct mtd_info *mtd, unsigned command, int column, column -= 256; readcmd = NAND_CMD_READ1; } - this->write_byte(mtd, readcmd); + this->cmd_ctrl(mtd, readcmd, ctrl); + ctrl &= ~NAND_CTRL_CHANGE; } - this->write_byte(mtd, command); - - /* Set ALE and clear CLE to start address cycle */ - this->hwcontrol(mtd, NAND_CTL_CLRCLE); - - if (column != -1 || page_addr != -1) { - this->hwcontrol(mtd, NAND_CTL_SETALE); + this->cmd_ctrl(mtd, command, ctrl); - /* Serially input address */ - if (column != -1) { - /* Adjust columns for 16 bit buswidth */ - if (this->options & NAND_BUSWIDTH_16) - column >>= 1; - this->write_byte(mtd, column); - } - if (page_addr != -1) { - this->write_byte(mtd, (uint8_t)(page_addr & 0xff)); - this->write_byte(mtd, (uint8_t)((page_addr >> 8) & 0xff)); - /* One more address cycle for devices > 32MiB */ - if (this->chipsize > (32 << 20)) - this->write_byte(mtd, (uint8_t)((page_addr >> 16) & 0x0f)); - } - /* Latch in address */ - this->hwcontrol(mtd, NAND_CTL_CLRALE); + /* + * Address cycle, when necessary + */ + ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE; + /* Serially input address */ + if (column != -1) { + /* Adjust columns for 16 bit buswidth */ + if (this->options & NAND_BUSWIDTH_16) + column >>= 1; + this->cmd_ctrl(mtd, column, ctrl); + ctrl &= ~NAND_CTRL_CHANGE; + } + if (page_addr != -1) { + this->cmd_ctrl(mtd, page_addr, ctrl); + ctrl &= ~NAND_CTRL_CHANGE; + this->cmd_ctrl(mtd, page_addr >> 8, ctrl); + /* One more address cycle for devices > 32MiB */ + if (this->chipsize > (32 << 20)) + this->cmd_ctrl(mtd, page_addr >> 16, ctrl); } + this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); /* * program and erase have their own busy handlers @@ -622,15 +572,16 @@ static void nand_command(struct mtd_info *mtd, unsigned command, int column, case NAND_CMD_ERASE2: case NAND_CMD_SEQIN: case NAND_CMD_STATUS: + this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE); return; case NAND_CMD_RESET: if (this->dev_ready) break; udelay(this->chip_delay); - this->hwcontrol(mtd, NAND_CTL_SETCLE); - this->write_byte(mtd, NAND_CMD_STATUS); - this->hwcontrol(mtd, NAND_CTL_CLRCLE); + this->cmd_ctrl(mtd, NAND_CMD_STATUS, + NAND_CTRL_CLE | NAND_CTRL_CHANGE); + this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE); while (!(this->read_byte(mtd) & NAND_STATUS_READY)) ; return; @@ -659,12 +610,13 @@ static void nand_command(struct mtd_info *mtd, unsigned command, int column, * @column: the column address for this command, -1 if none * @page_addr: the page address for this command, -1 if none * - * Send command to NAND device. This is the version for the new large page devices - * We dont have the separate regions as we have in the small page devices. - * We must emulate NAND_CMD_READOOB to keep the code compatible. + * Send command to NAND device. This is the version for the new large page + * devices We dont have the separate regions as we have in the small page + * devices. We must emulate NAND_CMD_READOOB to keep the code compatible. * */ -static void nand_command_lp(struct mtd_info *mtd, unsigned command, int column, int page_addr) +static void nand_command_lp(struct mtd_info *mtd, unsigned int command, + int column, int page_addr) { register struct nand_chip *this = mtd->priv; @@ -674,34 +626,33 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned command, int column, command = NAND_CMD_READ0; } - /* Begin command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_SETCLE); - /* Write out the command to the device. */ - this->write_byte(mtd, (command & 0xff)); - /* End command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_CLRCLE); + /* Command latch cycle */ + this->cmd_ctrl(mtd, command & 0xff, + NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); if (column != -1 || page_addr != -1) { - this->hwcontrol(mtd, NAND_CTL_SETALE); + int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE; /* Serially input address */ if (column != -1) { /* Adjust columns for 16 bit buswidth */ if (this->options & NAND_BUSWIDTH_16) column >>= 1; - this->write_byte(mtd, column & 0xff); - this->write_byte(mtd, column >> 8); + this->cmd_ctrl(mtd, column, ctrl); + ctrl &= ~NAND_CTRL_CHANGE; + this->cmd_ctrl(mtd, column >> 8, ctrl); } if (page_addr != -1) { - this->write_byte(mtd, (uint8_t)(page_addr & 0xff)); - this->write_byte(mtd, (uint8_t)((page_addr >> 8) & 0xff)); + this->cmd_ctrl(mtd, page_addr, ctrl); + this->cmd_ctrl(mtd, page_addr >> 8, + NAND_NCE | NAND_ALE); /* One more address cycle for devices > 128MiB */ if (this->chipsize > (128 << 20)) - this->write_byte(mtd, (uint8_t)((page_addr >> 16) & 0xff)); + this->cmd_ctrl(mtd, page_addr >> 16, + NAND_NCE | NAND_ALE); } - /* Latch in address */ - this->hwcontrol(mtd, NAND_CTL_CLRALE); } + this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); /* * program and erase have their own busy handlers @@ -733,20 +684,14 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned command, int column, if (this->dev_ready) break; udelay(this->chip_delay); - this->hwcontrol(mtd, NAND_CTL_SETCLE); - this->write_byte(mtd, NAND_CMD_STATUS); - this->hwcontrol(mtd, NAND_CTL_CLRCLE); + this->cmd_ctrl(mtd, NAND_CMD_STATUS, NAND_NCE | NAND_CLE); + this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE); while (!(this->read_byte(mtd) & NAND_STATUS_READY)) ; return; case NAND_CMD_READ0: - /* Begin command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_SETCLE); - /* Write out the start read command */ - this->write_byte(mtd, NAND_CMD_READSTART); - /* End command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_CLRCLE); - /* Fall through into ready check */ + this->cmd_ctrl(mtd, NAND_CMD_READSTART, NAND_NCE | NAND_CLE); + this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE); /* This applies to read commands */ default: @@ -1085,27 +1030,6 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retl } /** - * nand_read_ecc - [MTD Interface] MTD compability function for nand_do_read_ecc - * @mtd: MTD device structure - * @from: offset to read from - * @len: number of bytes to read - * @retlen: pointer to variable to store the number of read bytes - * @buf: the databuffer to put data - * @oob_buf: filesystem supplied oob data buffer - * @oobsel: oob selection structure - * - * This function simply calls nand_do_read_ecc with flags = 0xff - */ -static int nand_read_ecc(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, uint8_t *buf, uint8_t *oob_buf, struct nand_oobinfo *oobsel) -{ - /* use userspace supplied oobinfo, if zero */ - if (oobsel == NULL) - oobsel = &mtd->oobinfo; - return nand_do_read_ecc(mtd, from, len, retlen, buf, oob_buf, oobsel, 0xff); -} - -/** * nand_do_read_ecc - [MTD Interface] Read data with ECC * @mtd: MTD device structure * @from: offset to read from @@ -1529,6 +1453,56 @@ int nand_read_raw(struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, s } /** + * nand_write_raw - [GENERIC] Write raw data including oob + * @mtd: MTD device structure + * @buf: source buffer + * @to: offset to write to + * @len: number of bytes to write + * @buf: source buffer + * @oob: oob buffer + * + * Write raw data including oob + */ +int nand_write_raw(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, + uint8_t *buf, uint8_t *oob) +{ + struct nand_chip *this = mtd->priv; + int page = (int)(to >> this->page_shift); + int chip = (int)(to >> this->chip_shift); + int ret; + + *retlen = 0; + + /* Do not allow writes past end of device */ + if ((to + len) > mtd->size) { + DEBUG(MTD_DEBUG_LEVEL0, "nand_read_raw: Attempt write " + "beyond end of device\n"); + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + nand_get_device(this, mtd, FL_WRITING); + + this->select_chip(mtd, chip); + this->data_poi = buf; + + while (len != *retlen) { + ret = nand_write_page(mtd, this, page, oob, &mtd->oobinfo, 0); + if (ret) + return ret; + page++; + *retlen += mtd->writesize; + this->data_poi += mtd->writesize; + oob += mtd->oobsize; + } + + /* Deselect and wake up anyone waiting on the device */ + nand_release_device(mtd); + return 0; +} +EXPORT_SYMBOL_GPL(nand_write_raw); + +/** * nand_prepare_oobbuf - [GENERIC] Prepare the out of band buffer * @mtd: MTD device structure * @fsbuf: buffer given by fs driver @@ -1590,57 +1564,39 @@ static uint8_t *nand_prepare_oobbuf(struct mtd_info *mtd, uint8_t *fsbuf, struct #define NOTALIGNED(x) (x & (mtd->writesize-1)) != 0 /** - * nand_write - [MTD Interface] compability function for nand_write_ecc + * nand_write - [MTD Interface] NAND write with ECC * @mtd: MTD device structure * @to: offset to write to * @len: number of bytes to write * @retlen: pointer to variable to store the number of written bytes * @buf: the data to write * - * This function simply calls nand_write_ecc with oob buffer and oobsel = NULL - * -*/ -static int nand_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const uint8_t *buf) -{ - return (nand_write_ecc(mtd, to, len, retlen, buf, NULL, NULL)); -} - -/** - * nand_write_ecc - [MTD Interface] NAND write with ECC - * @mtd: MTD device structure - * @to: offset to write to - * @len: number of bytes to write - * @retlen: pointer to variable to store the number of written bytes - * @buf: the data to write - * @eccbuf: filesystem supplied oob data buffer - * @oobsel: oob selection structure - * * NAND write with ECC */ -static int nand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const uint8_t *buf, uint8_t *eccbuf, - struct nand_oobinfo *oobsel) +static int nand_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const uint8_t *buf) { int startpage, page, ret = -EIO, oob = 0, written = 0, chipnr; int autoplace = 0, numpages, totalpages; struct nand_chip *this = mtd->priv; - uint8_t *oobbuf, *bufstart; + uint8_t *oobbuf, *bufstart, *eccbuf = NULL; int ppblock = (1 << (this->phys_erase_shift - this->page_shift)); + struct nand_oobinfo *oobsel = &mtd->oobinfo; - DEBUG(MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int)to, (int)len); + DEBUG(MTD_DEBUG_LEVEL3, "nand_write: to = 0x%08x, len = %i\n", (unsigned int)to, (int)len); /* Initialize retlen, in case of early exit */ *retlen = 0; /* Do not allow write past end of device */ if ((to + len) > mtd->size) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_write_ecc: Attempt to write past end of page\n"); + DEBUG(MTD_DEBUG_LEVEL0, "nand_write: Attempt to write past end of page\n"); return -EINVAL; } /* reject writes, which are not page aligned */ if (NOTALIGNED(to) || NOTALIGNED(len)) { - printk(KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n"); + printk(KERN_NOTICE "nand_write: Attempt to write not page aligned data\n"); return -EINVAL; } @@ -1656,10 +1612,6 @@ static int nand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len, if (nand_check_wp(mtd)) goto out; - /* if oobsel is NULL, use chip defaults */ - if (oobsel == NULL) - oobsel = &mtd->oobinfo; - /* Autoplace of oob data ? Use the default placement scheme */ if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) { oobsel = this->autooob; @@ -1694,7 +1646,7 @@ static int nand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len, */ ret = nand_write_page(mtd, this, page, &oobbuf[oob], oobsel, (--numpages > 0)); if (ret) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_write_ecc: write_page failed %d\n", ret); + DEBUG(MTD_DEBUG_LEVEL0, "nand_write: write_page failed %d\n", ret); goto out; } /* Next oob page */ @@ -1717,7 +1669,7 @@ static int nand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len, ret = nand_verify_pages(mtd, this, startpage, page - startpage, oobbuf, oobsel, chipnr, (eccbuf != NULL)); if (ret) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret); + DEBUG(MTD_DEBUG_LEVEL0, "nand_write: verify_pages failed %d\n", ret); goto out; } *retlen = written; @@ -1746,7 +1698,7 @@ static int nand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len, if (!ret) *retlen = written; else - DEBUG(MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret); + DEBUG(MTD_DEBUG_LEVEL0, "nand_write: verify_pages failed %d\n", ret); out: /* Deselect and wake up anyone waiting on the device */ @@ -1857,187 +1809,6 @@ static int nand_write_oob(struct mtd_info *mtd, loff_t to, size_t len, size_t *r } /** - * nand_writev - [MTD Interface] compabilty function for nand_writev_ecc - * @mtd: MTD device structure - * @vecs: the iovectors to write - * @count: number of vectors - * @to: offset to write to - * @retlen: pointer to variable to store the number of written bytes - * - * NAND write with kvec. This just calls the ecc function - */ -static int nand_writev(struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, - loff_t to, size_t *retlen) -{ - return (nand_writev_ecc(mtd, vecs, count, to, retlen, NULL, NULL)); -} - -/** - * nand_writev_ecc - [MTD Interface] write with iovec with ecc - * @mtd: MTD device structure - * @vecs: the iovectors to write - * @count: number of vectors - * @to: offset to write to - * @retlen: pointer to variable to store the number of written bytes - * @eccbuf: filesystem supplied oob data buffer - * @oobsel: oob selection structure - * - * NAND write with iovec with ecc - */ -static int nand_writev_ecc(struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, - loff_t to, size_t *retlen, uint8_t *eccbuf, struct nand_oobinfo *oobsel) -{ - int i, page, len, total_len, ret = -EIO, written = 0, chipnr; - int oob, numpages, autoplace = 0, startpage; - struct nand_chip *this = mtd->priv; - int ppblock = (1 << (this->phys_erase_shift - this->page_shift)); - uint8_t *oobbuf, *bufstart; - - /* Preset written len for early exit */ - *retlen = 0; - - /* Calculate total length of data */ - total_len = 0; - for (i = 0; i < count; i++) - total_len += (int)vecs[i].iov_len; - - DEBUG(MTD_DEBUG_LEVEL3, "nand_writev: to = 0x%08x, len = %i, count = %ld\n", (unsigned int)to, (unsigned int)total_len, count); - - /* Do not allow write past end of page */ - if ((to + total_len) > mtd->size) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_writev: Attempted write past end of device\n"); - return -EINVAL; - } - - /* reject writes, which are not page aligned */ - if (NOTALIGNED(to) || NOTALIGNED(total_len)) { - printk(KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n"); - return -EINVAL; - } - - /* Grab the lock and see if the device is available */ - nand_get_device(this, mtd, FL_WRITING); - - /* Get the current chip-nr */ - chipnr = (int)(to >> this->chip_shift); - /* Select the NAND device */ - this->select_chip(mtd, chipnr); - - /* Check, if it is write protected */ - if (nand_check_wp(mtd)) - goto out; - - /* if oobsel is NULL, use chip defaults */ - if (oobsel == NULL) - oobsel = &mtd->oobinfo; - - /* Autoplace of oob data ? Use the default placement scheme */ - if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) { - oobsel = this->autooob; - autoplace = 1; - } - if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR) - autoplace = 1; - - /* Setup start page */ - page = (int)(to >> this->page_shift); - /* Invalidate the page cache, if we write to the cached page */ - if (page <= this->pagebuf && this->pagebuf < ((to + total_len) >> this->page_shift)) - this->pagebuf = -1; - - startpage = page & this->pagemask; - - /* Loop until all kvec' data has been written */ - len = 0; - while (count) { - /* If the given tuple is >= pagesize then - * write it out from the iov - */ - if ((vecs->iov_len - len) >= mtd->writesize) { - /* Calc number of pages we can write - * out of this iov in one go */ - numpages = (vecs->iov_len - len) >> this->page_shift; - /* Do not cross block boundaries */ - numpages = min(ppblock - (startpage & (ppblock - 1)), numpages); - oobbuf = nand_prepare_oobbuf(mtd, NULL, oobsel, autoplace, numpages); - bufstart = (uint8_t *) vecs->iov_base; - bufstart += len; - this->data_poi = bufstart; - oob = 0; - for (i = 1; i <= numpages; i++) { - /* Write one page. If this is the last page to write - * then use the real pageprogram command, else select - * cached programming if supported by the chip. - */ - ret = nand_write_page(mtd, this, page & this->pagemask, - &oobbuf[oob], oobsel, i != numpages); - if (ret) - goto out; - this->data_poi += mtd->writesize; - len += mtd->writesize; - oob += mtd->oobsize; - page++; - } - /* Check, if we have to switch to the next tuple */ - if (len >= (int)vecs->iov_len) { - vecs++; - len = 0; - count--; - } - } else { - /* We must use the internal buffer, read data out of each - * tuple until we have a full page to write - */ - int cnt = 0; - while (cnt < mtd->writesize) { - if (vecs->iov_base != NULL && vecs->iov_len) - this->data_buf[cnt++] = ((uint8_t *) vecs->iov_base)[len++]; - /* Check, if we have to switch to the next tuple */ - if (len >= (int)vecs->iov_len) { - vecs++; - len = 0; - count--; - } - } - this->pagebuf = page; - this->data_poi = this->data_buf; - bufstart = this->data_poi; - numpages = 1; - oobbuf = nand_prepare_oobbuf(mtd, NULL, oobsel, autoplace, numpages); - ret = nand_write_page(mtd, this, page & this->pagemask, oobbuf, oobsel, 0); - if (ret) - goto out; - page++; - } - - this->data_poi = bufstart; - ret = nand_verify_pages(mtd, this, startpage, numpages, oobbuf, oobsel, chipnr, 0); - if (ret) - goto out; - - written += mtd->writesize * numpages; - /* All done ? */ - if (!count) - break; - - startpage = page & this->pagemask; - /* Check, if we cross a chip boundary */ - if (!startpage) { - chipnr++; - this->select_chip(mtd, -1); - this->select_chip(mtd, chipnr); - } - } - ret = 0; - out: - /* Deselect and wake up anyone waiting on the device */ - nand_release_device(mtd); - - *retlen = written; - return ret; -} - -/** * single_erease_cmd - [GENERIC] NAND standard block erase command function * @mtd: MTD device structure * @page: the page address of the block which will be erased @@ -2392,12 +2163,8 @@ static void nand_set_defaults(struct nand_chip *this, int busw) if (!this->select_chip) this->select_chip = nand_select_chip; - if (!this->write_byte) - this->write_byte = busw ? nand_write_byte16 : nand_write_byte; if (!this->read_byte) this->read_byte = busw ? nand_read_byte16 : nand_read_byte; - if (!this->write_word) - this->write_word = nand_write_word; if (!this->read_word) this->read_word = nand_read_word; if (!this->block_bad) @@ -2713,13 +2480,8 @@ int nand_scan(struct mtd_info *mtd, int maxchips) mtd->unpoint = NULL; mtd->read = nand_read; mtd->write = nand_write; - mtd->read_ecc = nand_read_ecc; - mtd->write_ecc = nand_write_ecc; mtd->read_oob = nand_read_oob; mtd->write_oob = nand_write_oob; - mtd->readv = NULL; - mtd->writev = nand_writev; - mtd->writev_ecc = nand_writev_ecc; mtd->sync = nand_sync; mtd->lock = NULL; mtd->unlock = NULL; |