diff options
Diffstat (limited to 'drivers/mtd')
-rw-r--r--[-rwxr-xr-x] | drivers/mtd/chips/cfi_util.c | 0 | ||||
-rw-r--r-- | drivers/mtd/chips/jedec_probe.c | 2 | ||||
-rw-r--r--[-rwxr-xr-x] | drivers/mtd/inftlcore.c | 0 | ||||
-rw-r--r-- | drivers/mtd/maps/pismo.c | 2 | ||||
-rw-r--r-- | drivers/mtd/maps/plat-ram.c | 2 | ||||
-rw-r--r-- | drivers/mtd/nand/Kconfig | 2 | ||||
-rw-r--r-- | drivers/mtd/nand/bcm_umi_nand.c | 4 | ||||
-rw-r--r-- | drivers/mtd/nand/mxc_nand.c | 2 | ||||
-rw-r--r-- | drivers/mtd/ubi/build.c | 136 | ||||
-rw-r--r-- | drivers/mtd/ubi/debug.h | 4 | ||||
-rw-r--r-- | drivers/mtd/ubi/io.c | 120 | ||||
-rw-r--r-- | drivers/mtd/ubi/scan.c | 11 | ||||
-rw-r--r-- | drivers/mtd/ubi/wl.c | 17 |
13 files changed, 207 insertions, 95 deletions
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c index ca584d0..ca584d0 100755..100644 --- a/drivers/mtd/chips/cfi_util.c +++ b/drivers/mtd/chips/cfi_util.c diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index 1bec5e1..8db1148 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -226,7 +226,7 @@ struct unlock_addr { * exists, but is for MTD_UADDR_NOT_SUPPORTED - and, therefore, * should not be used. The problem is that structures with * initializers have extra fields initialized to 0. It is _very_ - * desireable to have the unlock address entries for unsupported + * desirable to have the unlock address entries for unsupported * data widths automatically initialized - that means that * MTD_UADDR_NOT_SUPPORTED must be 0 and the first entry here * must go unused. diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c index 8aca552..8aca552 100755..100644 --- a/drivers/mtd/inftlcore.c +++ b/drivers/mtd/inftlcore.c diff --git a/drivers/mtd/maps/pismo.c b/drivers/mtd/maps/pismo.c index c48cad2..30e12c8 100644 --- a/drivers/mtd/maps/pismo.c +++ b/drivers/mtd/maps/pismo.c @@ -118,7 +118,7 @@ static int __devinit pismo_add_device(struct pismo_data *pismo, int i, { struct platform_device *dev; struct resource res = { }; - phys_addr_t base = region.base; + phys_addr_t base = region->base; int ret; if (base == ~0) diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c index dafb919..76a76be 100644 --- a/drivers/mtd/maps/plat-ram.c +++ b/drivers/mtd/maps/plat-ram.c @@ -4,7 +4,7 @@ * http://www.simtec.co.uk/products/SWLINUX/ * Ben Dooks <ben@simtec.co.uk> * - * Generic platfrom device based RAM map + * Generic platform device based RAM map * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index bb64656..1157d56 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -444,7 +444,7 @@ config MTD_NAND_FSL_UPM config MTD_NAND_MXC tristate "MXC NAND support" - depends on ARCH_MX2 || ARCH_MX3 + depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 help This enables the driver for the NAND flash controller on the MXC processors. diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c index 087bcd7..7d1cca7a 100644 --- a/drivers/mtd/nand/bcm_umi_nand.c +++ b/drivers/mtd/nand/bcm_umi_nand.c @@ -381,7 +381,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev) if (!r) return -ENXIO; - /* map physical adress */ + /* map physical address */ bcm_umi_io_base = ioremap(r->start, r->end - r->start + 1); if (!bcm_umi_io_base) { @@ -525,7 +525,7 @@ static int bcm_umi_nand_remove(struct platform_device *pdev) /* Release resources, unregister device */ nand_release(board_mtd); - /* unmap physical adress */ + /* unmap physical address */ iounmap(bcm_umi_io_base); /* Free the MTD device structure */ diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 45dec57..b2900d8 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -507,7 +507,7 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr) * MXC NANDFC can only perform full page+spare or * spare-only read/write. When the upper layers * layers perform a read/write buf operation, - * we will used the saved column adress to index into + * we will used the saved column address to index into * the full page. */ send_addr(host, 0, page_addr == -1); diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 14cec04..fad40aa 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -37,6 +37,7 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/stringify.h> +#include <linux/namei.h> #include <linux/stat.h> #include <linux/miscdevice.h> #include <linux/log2.h> @@ -50,7 +51,8 @@ /** * struct mtd_dev_param - MTD device parameter description data structure. - * @name: MTD device name or number string + * @name: MTD character device node path, MTD device name, or MTD device number + * string * @vid_hdr_offs: VID header offset */ struct mtd_dev_param { @@ -59,10 +61,10 @@ struct mtd_dev_param { }; /* Numbers of elements set in the @mtd_dev_param array */ -static int mtd_devs; +static int __initdata mtd_devs; /* MTD devices specification parameters */ -static struct mtd_dev_param mtd_dev_param[UBI_MAX_DEVICES]; +static struct mtd_dev_param __initdata mtd_dev_param[UBI_MAX_DEVICES]; /* Root UBI "class" object (corresponds to '/<sysfs>/class/ubi/') */ struct class *ubi_class; @@ -87,7 +89,8 @@ DEFINE_MUTEX(ubi_devices_mutex); static DEFINE_SPINLOCK(ubi_devices_lock); /* "Show" method for files in '/<sysfs>/class/ubi/' */ -static ssize_t ubi_version_show(struct class *class, char *buf) +static ssize_t ubi_version_show(struct class *class, struct class_attribute *attr, + char *buf) { return sprintf(buf, "%d\n", UBI_VERSION); } @@ -363,11 +366,13 @@ static void dev_release(struct device *dev) /** * ubi_sysfs_init - initialize sysfs for an UBI device. * @ubi: UBI device description object + * @ref: set to %1 on exit in case of failure if a reference to @ubi->dev was + * taken * * This function returns zero in case of success and a negative error code in * case of failure. */ -static int ubi_sysfs_init(struct ubi_device *ubi) +static int ubi_sysfs_init(struct ubi_device *ubi, int *ref) { int err; @@ -379,6 +384,7 @@ static int ubi_sysfs_init(struct ubi_device *ubi) if (err) return err; + *ref = 1; err = device_create_file(&ubi->dev, &dev_eraseblock_size); if (err) return err; @@ -434,7 +440,7 @@ static void ubi_sysfs_close(struct ubi_device *ubi) } /** - * kill_volumes - destroy all volumes. + * kill_volumes - destroy all user volumes. * @ubi: UBI device description object */ static void kill_volumes(struct ubi_device *ubi) @@ -447,36 +453,29 @@ static void kill_volumes(struct ubi_device *ubi) } /** - * free_user_volumes - free all user volumes. - * @ubi: UBI device description object - * - * Normally the volumes are freed at the release function of the volume device - * objects. However, on error paths the volumes have to be freed before the - * device objects have been initialized. - */ -static void free_user_volumes(struct ubi_device *ubi) -{ - int i; - - for (i = 0; i < ubi->vtbl_slots; i++) - if (ubi->volumes[i]) { - kfree(ubi->volumes[i]->eba_tbl); - kfree(ubi->volumes[i]); - } -} - -/** * uif_init - initialize user interfaces for an UBI device. * @ubi: UBI device description object + * @ref: set to %1 on exit in case of failure if a reference to @ubi->dev was + * taken, otherwise set to %0 + * + * This function initializes various user interfaces for an UBI device. If the + * initialization fails at an early stage, this function frees all the + * resources it allocated, returns an error, and @ref is set to %0. However, + * if the initialization fails after the UBI device was registered in the + * driver core subsystem, this function takes a reference to @ubi->dev, because + * otherwise the release function ('dev_release()') would free whole @ubi + * object. The @ref argument is set to %1 in this case. The caller has to put + * this reference. * * This function returns zero in case of success and a negative error code in - * case of failure. Note, this function destroys all volumes if it fails. + * case of failure. */ -static int uif_init(struct ubi_device *ubi) +static int uif_init(struct ubi_device *ubi, int *ref) { int i, err; dev_t dev; + *ref = 0; sprintf(ubi->ubi_name, UBI_NAME_STR "%d", ubi->ubi_num); /* @@ -504,7 +503,7 @@ static int uif_init(struct ubi_device *ubi) goto out_unreg; } - err = ubi_sysfs_init(ubi); + err = ubi_sysfs_init(ubi, ref); if (err) goto out_sysfs; @@ -522,6 +521,8 @@ static int uif_init(struct ubi_device *ubi) out_volumes: kill_volumes(ubi); out_sysfs: + if (*ref) + get_device(&ubi->dev); ubi_sysfs_close(ubi); cdev_del(&ubi->cdev); out_unreg: @@ -875,7 +876,7 @@ static int ubi_reboot_notifier(struct notifier_block *n, unsigned long state, int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset) { struct ubi_device *ubi; - int i, err, do_free = 1; + int i, err, ref = 0; /* * Check if we already have the same MTD device attached. @@ -975,9 +976,9 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset) goto out_detach; } - err = uif_init(ubi); + err = uif_init(ubi, &ref); if (err) - goto out_nofree; + goto out_detach; ubi->bgt_thread = kthread_create(ubi_thread, ubi, ubi->bgt_name); if (IS_ERR(ubi->bgt_thread)) { @@ -1025,12 +1026,8 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset) out_uif: uif_close(ubi); -out_nofree: - do_free = 0; out_detach: ubi_wl_close(ubi); - if (do_free) - free_user_volumes(ubi); free_internal_volumes(ubi); vfree(ubi->vtbl); out_free: @@ -1039,7 +1036,10 @@ out_free: #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID vfree(ubi->dbg_peb_buf); #endif - kfree(ubi); + if (ref) + put_device(&ubi->dev); + else + kfree(ubi); return err; } @@ -1096,7 +1096,7 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway) /* * Get a reference to the device in order to prevent 'dev_release()' - * from freeing @ubi object. + * from freeing the @ubi object. */ get_device(&ubi->dev); @@ -1116,13 +1116,50 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway) } /** - * find_mtd_device - open an MTD device by its name or number. - * @mtd_dev: name or number of the device + * open_mtd_by_chdev - open an MTD device by its character device node path. + * @mtd_dev: MTD character device node path + * + * This helper function opens an MTD device by its character node device path. + * Returns MTD device description object in case of success and a negative + * error code in case of failure. + */ +static struct mtd_info * __init open_mtd_by_chdev(const char *mtd_dev) +{ + int err, major, minor, mode; + struct path path; + + /* Probably this is an MTD character device node path */ + err = kern_path(mtd_dev, LOOKUP_FOLLOW, &path); + if (err) + return ERR_PTR(err); + + /* MTD device number is defined by the major / minor numbers */ + major = imajor(path.dentry->d_inode); + minor = iminor(path.dentry->d_inode); + mode = path.dentry->d_inode->i_mode; + path_put(&path); + if (major != MTD_CHAR_MAJOR || !S_ISCHR(mode)) + return ERR_PTR(-EINVAL); + + if (minor & 1) + /* + * Just do not think the "/dev/mtdrX" devices support is need, + * so do not support them to avoid doing extra work. + */ + return ERR_PTR(-EINVAL); + + return get_mtd_device(NULL, minor / 2); +} + +/** + * open_mtd_device - open MTD device by name, character device path, or number. + * @mtd_dev: name, character device node path, or MTD device device number * * This function tries to open and MTD device described by @mtd_dev string, - * which is first treated as an ASCII number, and if it is not true, it is - * treated as MTD device name. Returns MTD device description object in case of - * success and a negative error code in case of failure. + * which is first treated as ASCII MTD device number, and if it is not true, it + * is treated as MTD device name, and if that is also not true, it is treated + * as MTD character device node path. Returns MTD device description object in + * case of success and a negative error code in case of failure. */ static struct mtd_info * __init open_mtd_device(const char *mtd_dev) { @@ -1137,6 +1174,9 @@ static struct mtd_info * __init open_mtd_device(const char *mtd_dev) * MTD device name. */ mtd = get_mtd_device_nm(mtd_dev); + if (IS_ERR(mtd) && PTR_ERR(mtd) == -ENODEV) + /* Probably this is an MTD character device node path */ + mtd = open_mtd_by_chdev(mtd_dev); } else mtd = get_mtd_device(NULL, mtd_num); @@ -1352,13 +1392,15 @@ static int __init ubi_mtd_param_parse(const char *val, struct kernel_param *kp) module_param_call(mtd, ubi_mtd_param_parse, NULL, NULL, 000); MODULE_PARM_DESC(mtd, "MTD devices to attach. Parameter format: " - "mtd=<name|num>[,<vid_hdr_offs>].\n" + "mtd=<name|num|path>[,<vid_hdr_offs>].\n" "Multiple \"mtd\" parameters may be specified.\n" - "MTD devices may be specified by their number or name.\n" + "MTD devices may be specified by their number, name, or " + "path to the MTD character device node.\n" "Optional \"vid_hdr_offs\" parameter specifies UBI VID " - "header position and data starting position to be used " - "by UBI.\n" - "Example: mtd=content,1984 mtd=4 - attach MTD device" + "header position to be used by UBI.\n" + "Example 1: mtd=/dev/mtd0 - attach MTD device " + "/dev/mtd0.\n" + "Example 2: mtd=content,1984 mtd=4 - attach MTD device " "with name \"content\" using VID header offset 1984, and " "MTD device number 4 with default VID header offset."); diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h index f30bcb3..17a1071 100644 --- a/drivers/mtd/ubi/debug.h +++ b/drivers/mtd/ubi/debug.h @@ -96,8 +96,11 @@ void ubi_dbg_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len); #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len); +int ubi_dbg_check_write(struct ubi_device *ubi, const void *buf, int pnum, + int offset, int len); #else #define ubi_dbg_check_all_ff(ubi, pnum, offset, len) 0 +#define ubi_dbg_check_write(ubi, buf, pnum, offset, len) 0 #endif #ifdef CONFIG_MTD_UBI_DEBUG_DISABLE_BGT @@ -176,6 +179,7 @@ static inline int ubi_dbg_is_erase_failure(void) #define ubi_dbg_is_write_failure() 0 #define ubi_dbg_is_erase_failure() 0 #define ubi_dbg_check_all_ff(ubi, pnum, offset, len) 0 +#define ubi_dbg_check_write(ubi, buf, pnum, offset, len) 0 #endif /* !CONFIG_MTD_UBI_DEBUG */ #endif /* !__UBI_DEBUG_H__ */ diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c index 8aa51e7..b4ecc84 100644 --- a/drivers/mtd/ubi/io.c +++ b/drivers/mtd/ubi/io.c @@ -143,7 +143,7 @@ int ubi_io_read(const struct ubi_device *ubi, void *buf, int pnum, int offset, err = paranoid_check_not_bad(ubi, pnum); if (err) - return err > 0 ? -EINVAL : err; + return err; addr = (loff_t)pnum * ubi->peb_size + offset; retry: @@ -236,12 +236,12 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset, err = paranoid_check_not_bad(ubi, pnum); if (err) - return err > 0 ? -EINVAL : err; + return err; /* The area we are writing to has to contain all 0xFF bytes */ err = ubi_dbg_check_all_ff(ubi, pnum, offset, len); if (err) - return err > 0 ? -EINVAL : err; + return err; if (offset >= ubi->leb_start) { /* @@ -250,10 +250,10 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset, */ err = paranoid_check_peb_ec_hdr(ubi, pnum); if (err) - return err > 0 ? -EINVAL : err; + return err; err = paranoid_check_peb_vid_hdr(ubi, pnum); if (err) - return err > 0 ? -EINVAL : err; + return err; } if (ubi_dbg_is_write_failure()) { @@ -273,6 +273,21 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset, } else ubi_assert(written == len); + if (!err) { + err = ubi_dbg_check_write(ubi, buf, pnum, offset, len); + if (err) + return err; + + /* + * Since we always write sequentially, the rest of the PEB has + * to contain only 0xFF bytes. + */ + offset += len; + len = ubi->peb_size - offset; + if (len) + err = ubi_dbg_check_all_ff(ubi, pnum, offset, len); + } + return err; } @@ -348,7 +363,7 @@ retry: err = ubi_dbg_check_all_ff(ubi, pnum, 0, ubi->peb_size); if (err) - return err > 0 ? -EINVAL : err; + return err; if (ubi_dbg_is_erase_failure() && !err) { dbg_err("cannot erase PEB %d (emulated)", pnum); @@ -542,7 +557,7 @@ int ubi_io_sync_erase(struct ubi_device *ubi, int pnum, int torture) err = paranoid_check_not_bad(ubi, pnum); if (err != 0) - return err > 0 ? -EINVAL : err; + return err; if (ubi->ro_mode) { ubi_err("read-only mode"); @@ -819,7 +834,7 @@ int ubi_io_write_ec_hdr(struct ubi_device *ubi, int pnum, err = paranoid_check_ec_hdr(ubi, pnum, ec_hdr); if (err) - return -EINVAL; + return err; err = ubi_io_write(ubi, ec_hdr, pnum, 0, ubi->ec_hdr_alsize); return err; @@ -1083,7 +1098,7 @@ int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum, err = paranoid_check_peb_ec_hdr(ubi, pnum); if (err) - return err > 0 ? -EINVAL : err; + return err; vid_hdr->magic = cpu_to_be32(UBI_VID_HDR_MAGIC); vid_hdr->version = UBI_VERSION; @@ -1092,7 +1107,7 @@ int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum, err = paranoid_check_vid_hdr(ubi, pnum, vid_hdr); if (err) - return -EINVAL; + return err; p = (char *)vid_hdr - ubi->vid_hdr_shift; err = ubi_io_write(ubi, p, pnum, ubi->vid_hdr_aloffset, @@ -1107,8 +1122,8 @@ int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum, * @ubi: UBI device description object * @pnum: physical eraseblock number to check * - * This function returns zero if the physical eraseblock is good, a positive - * number if it is bad and a negative error code if an error occurred. + * This function returns zero if the physical eraseblock is good, %-EINVAL if + * it is bad and a negative error code if an error occurred. */ static int paranoid_check_not_bad(const struct ubi_device *ubi, int pnum) { @@ -1120,7 +1135,7 @@ static int paranoid_check_not_bad(const struct ubi_device *ubi, int pnum) ubi_err("paranoid check failed for PEB %d", pnum); ubi_dbg_dump_stack(); - return err; + return err > 0 ? -EINVAL : err; } /** @@ -1130,7 +1145,7 @@ static int paranoid_check_not_bad(const struct ubi_device *ubi, int pnum) * @ec_hdr: the erase counter header to check * * This function returns zero if the erase counter header contains valid - * values, and %1 if not. + * values, and %-EINVAL if not. */ static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum, const struct ubi_ec_hdr *ec_hdr) @@ -1156,7 +1171,7 @@ static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum, fail: ubi_dbg_dump_ec_hdr(ec_hdr); ubi_dbg_dump_stack(); - return 1; + return -EINVAL; } /** @@ -1164,8 +1179,8 @@ fail: * @ubi: UBI device description object * @pnum: the physical eraseblock number to check * - * This function returns zero if the erase counter header is all right, %1 if - * not, and a negative error code if an error occurred. + * This function returns zero if the erase counter header is all right and and + * a negative error code if not or if an error occurred. */ static int paranoid_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum) { @@ -1188,7 +1203,7 @@ static int paranoid_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum) ubi_err("paranoid check failed for PEB %d", pnum); ubi_dbg_dump_ec_hdr(ec_hdr); ubi_dbg_dump_stack(); - err = 1; + err = -EINVAL; goto exit; } @@ -1206,7 +1221,7 @@ exit: * @vid_hdr: the volume identifier header to check * * This function returns zero if the volume identifier header is all right, and - * %1 if not. + * %-EINVAL if not. */ static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum, const struct ubi_vid_hdr *vid_hdr) @@ -1233,7 +1248,7 @@ fail: ubi_err("paranoid check failed for PEB %d", pnum); ubi_dbg_dump_vid_hdr(vid_hdr); ubi_dbg_dump_stack(); - return 1; + return -EINVAL; } @@ -1243,7 +1258,7 @@ fail: * @pnum: the physical eraseblock number to check * * This function returns zero if the volume identifier header is all right, - * %1 if not, and a negative error code if an error occurred. + * and a negative error code if not or if an error occurred. */ static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum) { @@ -1270,7 +1285,7 @@ static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum) ubi_err("paranoid check failed for PEB %d", pnum); ubi_dbg_dump_vid_hdr(vid_hdr); ubi_dbg_dump_stack(); - err = 1; + err = -EINVAL; goto exit; } @@ -1282,6 +1297,61 @@ exit: } /** + * ubi_dbg_check_write - make sure write succeeded. + * @ubi: UBI device description object + * @buf: buffer with data which were written + * @pnum: physical eraseblock number the data were written to + * @offset: offset within the physical eraseblock the data were written to + * @len: how many bytes were written + * + * This functions reads data which were recently written and compares it with + * the original data buffer - the data have to match. Returns zero if the data + * match and a negative error code if not or in case of failure. + */ +int ubi_dbg_check_write(struct ubi_device *ubi, const void *buf, int pnum, + int offset, int len) +{ + int err, i; + + mutex_lock(&ubi->dbg_buf_mutex); + err = ubi_io_read(ubi, ubi->dbg_peb_buf, pnum, offset, len); + if (err) + goto out_unlock; + + for (i = 0; i < len; i++) { + uint8_t c = ((uint8_t *)buf)[i]; + uint8_t c1 = ((uint8_t *)ubi->dbg_peb_buf)[i]; + int dump_len; + + if (c == c1) + continue; + + ubi_err("paranoid check failed for PEB %d:%d, len %d", + pnum, offset, len); + ubi_msg("data differ at position %d", i); + dump_len = max_t(int, 128, len - i); + ubi_msg("hex dump of the original buffer from %d to %d", + i, i + dump_len); + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, + buf + i, dump_len, 1); + ubi_msg("hex dump of the read buffer from %d to %d", + i, i + dump_len); + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, + ubi->dbg_peb_buf + i, dump_len, 1); + ubi_dbg_dump_stack(); + err = -EINVAL; + goto out_unlock; + } + mutex_unlock(&ubi->dbg_buf_mutex); + + return 0; + +out_unlock: + mutex_unlock(&ubi->dbg_buf_mutex); + return err; +} + +/** * ubi_dbg_check_all_ff - check that a region of flash is empty. * @ubi: UBI device description object * @pnum: the physical eraseblock number to check @@ -1289,8 +1359,8 @@ exit: * @len: the length of the region to check * * This function returns zero if only 0xFF bytes are present at offset - * @offset of the physical eraseblock @pnum, %1 if not, and a negative error - * code if an error occurred. + * @offset of the physical eraseblock @pnum, and a negative error code if not + * or if an error occurred. */ int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len) { @@ -1321,7 +1391,7 @@ fail: ubi_msg("hex dump of the %d-%d region", offset, offset + len); print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, ubi->dbg_peb_buf, len, 1); - err = 1; + err = -EINVAL; error: ubi_dbg_dump_stack(); mutex_unlock(&ubi->dbg_buf_mutex); diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index 90af61a..594184b 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -974,11 +974,8 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi) seb->ec = si->mean_ec; err = paranoid_check_si(ubi, si); - if (err) { - if (err > 0) - err = -EINVAL; + if (err) goto out_vidh; - } ubi_free_vid_hdr(ubi, vidh); kfree(ech); @@ -1086,8 +1083,8 @@ void ubi_scan_destroy_si(struct ubi_scan_info *si) * @ubi: UBI device description object * @si: scanning information * - * This function returns zero if the scanning information is all right, %1 if - * not and a negative error code if an error occurred. + * This function returns zero if the scanning information is all right, and a + * negative error code if not or if an error occurred. */ static int paranoid_check_si(struct ubi_device *ubi, struct ubi_scan_info *si) { @@ -1346,7 +1343,7 @@ bad_vid_hdr: out: ubi_dbg_dump_stack(); - return 1; + return -EINVAL; } #endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */ diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 600c722..f64ddab 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -464,7 +464,7 @@ retry: ubi->peb_size - ubi->vid_hdr_aloffset); if (err) { ubi_err("new PEB %d does not contain all 0xFF bytes", e->pnum); - return err > 0 ? -EINVAL : err; + return err; } return e->pnum; @@ -513,7 +513,7 @@ static int sync_erase(struct ubi_device *ubi, struct ubi_wl_entry *e, dbg_wl("erase PEB %d, old EC %llu", e->pnum, ec); err = paranoid_check_ec(ubi, e->pnum, e->ec); - if (err > 0) + if (err) return -EINVAL; ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_NOFS); @@ -1572,8 +1572,7 @@ void ubi_wl_close(struct ubi_device *ubi) * @ec: the erase counter to check * * This function returns zero if the erase counter of physical eraseblock @pnum - * is equivalent to @ec, %1 if not, and a negative error code if an error - * occurred. + * is equivalent to @ec, and a negative error code if not or if an error occurred. */ static int paranoid_check_ec(struct ubi_device *ubi, int pnum, int ec) { @@ -1611,8 +1610,8 @@ out_free: * @e: the wear-leveling entry to check * @root: the root of the tree * - * This function returns zero if @e is in the @root RB-tree and %1 if it is - * not. + * This function returns zero if @e is in the @root RB-tree and %-EINVAL if it + * is not. */ static int paranoid_check_in_wl_tree(struct ubi_wl_entry *e, struct rb_root *root) @@ -1623,7 +1622,7 @@ static int paranoid_check_in_wl_tree(struct ubi_wl_entry *e, ubi_err("paranoid check failed for PEB %d, EC %d, RB-tree %p ", e->pnum, e->ec, root); ubi_dbg_dump_stack(); - return 1; + return -EINVAL; } /** @@ -1632,7 +1631,7 @@ static int paranoid_check_in_wl_tree(struct ubi_wl_entry *e, * @ubi: UBI device description object * @e: the wear-leveling entry to check * - * This function returns zero if @e is in @ubi->pq and %1 if it is not. + * This function returns zero if @e is in @ubi->pq and %-EINVAL if it is not. */ static int paranoid_check_in_pq(struct ubi_device *ubi, struct ubi_wl_entry *e) { @@ -1647,6 +1646,6 @@ static int paranoid_check_in_pq(struct ubi_device *ubi, struct ubi_wl_entry *e) ubi_err("paranoid check failed for PEB %d, EC %d, Protect queue", e->pnum, e->ec); ubi_dbg_dump_stack(); - return 1; + return -EINVAL; } #endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */ |