diff options
Diffstat (limited to 'drivers/net/atl1c/atl1c_hw.c')
| -rw-r--r-- | drivers/net/atl1c/atl1c_hw.c | 527 |
1 files changed, 527 insertions, 0 deletions
diff --git a/drivers/net/atl1c/atl1c_hw.c b/drivers/net/atl1c/atl1c_hw.c new file mode 100644 index 0000000..3e69b94 --- /dev/null +++ b/drivers/net/atl1c/atl1c_hw.c @@ -0,0 +1,527 @@ +/* + * Copyright(c) 2007 Atheros Corporation. All rights reserved. + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/mii.h> +#include <linux/crc32.h> + +#include "atl1c.h" + +/* + * check_eeprom_exist + * return 1 if eeprom exist + */ +int atl1c_check_eeprom_exist(struct atl1c_hw *hw) +{ + u32 data; + + AT_READ_REG(hw, REG_TWSI_DEBUG, &data); + if (data & TWSI_DEBUG_DEV_EXIST) + return 1; + + return 0; +} + +void atl1c_hw_set_mac_addr(struct atl1c_hw *hw) +{ + u32 value; + /* + * 00-0B-6A-F6-00-DC + * 0: 6AF600DC 1: 000B + * low dword + */ + value = (((u32)hw->mac_addr[2]) << 24) | + (((u32)hw->mac_addr[3]) << 16) | + (((u32)hw->mac_addr[4]) << 8) | + (((u32)hw->mac_addr[5])) ; + AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value); + /* hight dword */ + value = (((u32)hw->mac_addr[0]) << 8) | + (((u32)hw->mac_addr[1])) ; + AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value); +} + +/* + * atl1c_get_permanent_address + * return 0 if get valid mac address, + */ +static int atl1c_get_permanent_address(struct atl1c_hw *hw) +{ + u32 addr[2]; + u32 i; + u32 otp_ctrl_data; + u32 twsi_ctrl_data; + u8 eth_addr[ETH_ALEN]; + + /* init */ + addr[0] = addr[1] = 0; + AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data); + if (atl1c_check_eeprom_exist(hw)) { + /* Enable OTP CLK */ + if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) { + otp_ctrl_data |= OTP_CTRL_CLK_EN; + AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data); + AT_WRITE_FLUSH(hw); + msleep(1); + } + + AT_READ_REG(hw, REG_TWSI_CTRL, &twsi_ctrl_data); + twsi_ctrl_data |= TWSI_CTRL_SW_LDSTART; + AT_WRITE_REG(hw, REG_TWSI_CTRL, twsi_ctrl_data); + for (i = 0; i < AT_TWSI_EEPROM_TIMEOUT; i++) { + msleep(10); + AT_READ_REG(hw, REG_TWSI_CTRL, &twsi_ctrl_data); + if ((twsi_ctrl_data & TWSI_CTRL_SW_LDSTART) == 0) + break; + } + if (i >= AT_TWSI_EEPROM_TIMEOUT) + return -1; + } + /* Disable OTP_CLK */ + if (otp_ctrl_data & OTP_CTRL_CLK_EN) { + otp_ctrl_data &= ~OTP_CTRL_CLK_EN; + AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data); + AT_WRITE_FLUSH(hw); + msleep(1); + } + + /* maybe MAC-address is from BIOS */ + AT_READ_REG(hw, REG_MAC_STA_ADDR, &addr[0]); + AT_READ_REG(hw, REG_MAC_STA_ADDR + 4, &addr[1]); + *(u32 *) ð_addr[2] = swab32(addr[0]); + *(u16 *) ð_addr[0] = swab16(*(u16 *)&addr[1]); + + if (is_valid_ether_addr(eth_addr)) { + memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); + return 0; + } + + return -1; +} + +bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value) +{ + int i; + int ret = false; + u32 otp_ctrl_data; + u32 control; + u32 data; + + if (offset & 3) + return ret; /* address do not align */ + + AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data); + if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) + AT_WRITE_REG(hw, REG_OTP_CTRL, + (otp_ctrl_data | OTP_CTRL_CLK_EN)); + + AT_WRITE_REG(hw, REG_EEPROM_DATA_LO, 0); + control = (offset & EEPROM_CTRL_ADDR_MASK) << EEPROM_CTRL_ADDR_SHIFT; + AT_WRITE_REG(hw, REG_EEPROM_CTRL, control); + + for (i = 0; i < 10; i++) { + udelay(100); + AT_READ_REG(hw, REG_EEPROM_CTRL, &control); + if (control & EEPROM_CTRL_RW) + break; + } + if (control & EEPROM_CTRL_RW) { + AT_READ_REG(hw, REG_EEPROM_CTRL, &data); + AT_READ_REG(hw, REG_EEPROM_DATA_LO, p_value); + data = data & 0xFFFF; + *p_value = swab32((data << 16) | (*p_value >> 16)); + ret = true; + } + if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) + AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data); + + return ret; +} +/* + * Reads the adapter's MAC address from the EEPROM + * + * hw - Struct containing variables accessed by shared code + */ +int atl1c_read_mac_addr(struct atl1c_hw *hw) +{ + int err = 0; + + err = atl1c_get_permanent_address(hw); + if (err) + random_ether_addr(hw->perm_mac_addr); + + memcpy(hw->mac_addr, hw->perm_mac_addr, sizeof(hw->perm_mac_addr)); + return 0; +} + +/* + * atl1c_hash_mc_addr + * purpose + * set hash value for a multicast address + * hash calcu processing : + * 1. calcu 32bit CRC for multicast address + * 2. reverse crc with MSB to LSB + */ +u32 atl1c_hash_mc_addr(struct atl1c_hw *hw, u8 *mc_addr) +{ + u32 crc32; + u32 value = 0; + int i; + + crc32 = ether_crc_le(6, mc_addr); + for (i = 0; i < 32; i++) + value |= (((crc32 >> i) & 1) << (31 - i)); + + return value; +} + +/* + * Sets the bit in the multicast table corresponding to the hash value. + * hw - Struct containing variables accessed by shared code + * hash_value - Multicast address hash value + */ +void atl1c_hash_set(struct atl1c_hw *hw, u32 hash_value) +{ + u32 hash_bit, hash_reg; + u32 mta; + + /* + * The HASH Table is a register array of 2 32-bit registers. + * It is treated like an array of 64 bits. We want to set + * bit BitArray[hash_value]. So we figure out what register + * the bit is in, read it, OR in the new bit, then write + * back the new value. The register is determined by the + * upper bit of the hash value and the bit within that + * register are determined by the lower 5 bits of the value. + */ + hash_reg = (hash_value >> 31) & 0x1; + hash_bit = (hash_value >> 26) & 0x1F; + + mta = AT_READ_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg); + + mta |= (1 << hash_bit); + + AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg, mta); +} + +/* + * Reads the value from a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to read + */ +int atl1c_read_phy_reg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data) +{ + u32 val; + int i; + + val = ((u32)(reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT | + MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | + MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; + + AT_WRITE_REG(hw, REG_MDIO_CTRL, val); + + for (i = 0; i < MDIO_WAIT_TIMES; i++) { + udelay(2); + AT_READ_REG(hw, REG_MDIO_CTRL, &val); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + if (!(val & (MDIO_START | MDIO_BUSY))) { + *phy_data = (u16)val; + return 0; + } + + return -1; +} + +/* + * Writes a value to a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to write + * data - data to write to the PHY + */ +int atl1c_write_phy_reg(struct atl1c_hw *hw, u32 reg_addr, u16 phy_data) +{ + int i; + u32 val; + + val = ((u32)(phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT | + (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT | + MDIO_SUP_PREAMBLE | MDIO_START | + MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; + + AT_WRITE_REG(hw, REG_MDIO_CTRL, val); + + for (i = 0; i < MDIO_WAIT_TIMES; i++) { + udelay(2); + AT_READ_REG(hw, REG_MDIO_CTRL, &val); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + + if (!(val & (MDIO_START | MDIO_BUSY))) + return 0; + + return -1; +} + +/* + * Configures PHY autoneg and flow control advertisement settings + * + * hw - Struct containing variables accessed by shared code + */ +static int atl1c_phy_setup_adv(struct atl1c_hw *hw) +{ + u16 mii_adv_data = ADVERTISE_DEFAULT_CAP & ~ADVERTISE_SPEED_MASK; + u16 mii_giga_ctrl_data = GIGA_CR_1000T_DEFAULT_CAP & + ~GIGA_CR_1000T_SPEED_MASK; + + if (hw->autoneg_advertised & ADVERTISED_10baseT_Half) + mii_adv_data |= ADVERTISE_10HALF; + if (hw->autoneg_advertised & ADVERTISED_10baseT_Full) + mii_adv_data |= ADVERTISE_10FULL; + if (hw->autoneg_advertised & ADVERTISED_100baseT_Half) + mii_adv_data |= ADVERTISE_100HALF; + if (hw->autoneg_advertised & ADVERTISED_100baseT_Full) + mii_adv_data |= ADVERTISE_100FULL; + + if (hw->autoneg_advertised & ADVERTISED_Autoneg) + mii_adv_data |= ADVERTISE_10HALF | ADVERTISE_10FULL | + ADVERTISE_100HALF | ADVERTISE_100FULL; + + if (hw->ctrl_flags & ATL1C_LINK_CAP_1000M) { + if (hw->autoneg_advertised & ADVERTISED_1000baseT_Half) + mii_giga_ctrl_data |= ADVERTISE_1000HALF; + if (hw->autoneg_advertised & ADVERTISED_1000baseT_Full) + mii_giga_ctrl_data |= ADVERTISE_1000FULL; + if (hw->autoneg_advertised & ADVERTISED_Autoneg) + mii_giga_ctrl_data |= ADVERTISE_1000HALF | + ADVERTISE_1000FULL; + } + + if (atl1c_write_phy_reg(hw, MII_ADVERTISE, mii_adv_data) != 0 || + atl1c_write_phy_reg(hw, MII_GIGA_CR, mii_giga_ctrl_data) != 0) + return -1; + return 0; +} + +void atl1c_phy_disable(struct atl1c_hw *hw) +{ + AT_WRITE_REGW(hw, REG_GPHY_CTRL, + GPHY_CTRL_PW_WOL_DIS | GPHY_CTRL_EXT_RESET); +} + +static void atl1c_phy_magic_data(struct atl1c_hw *hw) +{ + u16 data; + + data = ANA_LOOP_SEL_10BT | ANA_EN_MASK_TB | ANA_EN_10BT_IDLE | + ((1 & ANA_INTERVAL_SEL_TIMER_MASK) << + ANA_INTERVAL_SEL_TIMER_SHIFT); + + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_18); + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + + data = (2 & ANA_SERDES_CDR_BW_MASK) | ANA_MS_PAD_DBG | + ANA_SERDES_EN_DEEM | ANA_SERDES_SEL_HSP | ANA_SERDES_EN_PLL | + ANA_SERDES_EN_LCKDT; + + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_5); + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + + data = (44 & ANA_LONG_CABLE_TH_100_MASK) | + ((33 & ANA_SHORT_CABLE_TH_100_MASK) << + ANA_SHORT_CABLE_TH_100_SHIFT) | ANA_BP_BAD_LINK_ACCUM | + ANA_BP_SMALL_BW; + + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_54); + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + + data = (11 & ANA_IECHO_ADJ_MASK) | ((11 & ANA_IECHO_ADJ_MASK) << + ANA_IECHO_ADJ_2_SHIFT) | ((8 & ANA_IECHO_ADJ_MASK) << + ANA_IECHO_ADJ_1_SHIFT) | ((8 & ANA_IECHO_ADJ_MASK) << + ANA_IECHO_ADJ_0_SHIFT); + + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_4); + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + + data = ANA_RESTART_CAL | ((7 & ANA_MANUL_SWICH_ON_MASK) << + ANA_MANUL_SWICH_ON_SHIFT) | ANA_MAN_ENABLE | + ANA_SEL_HSP | ANA_EN_HB | ANA_OEN_125M; + + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_0); + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + + if (hw->ctrl_flags & ATL1C_HIB_DISABLE) { + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_41); + if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &data) != 0) + return; + data &= ~ANA_TOP_PS_EN; + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_11); + if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &data) != 0) + return; + data &= ~ANA_PS_HIB_EN; + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + } +} + +int atl1c_phy_reset(struct atl1c_hw *hw) +{ + struct atl1c_adapter *adapter = hw->adapter; + struct pci_dev *pdev = adapter->pdev; + u32 phy_ctrl_data = GPHY_CTRL_DEFAULT; + u32 mii_ier_data = IER_LINK_UP | IER_LINK_DOWN; + int err; + + if (hw->ctrl_flags & ATL1C_HIB_DISABLE) + phy_ctrl_data &= ~GPHY_CTRL_HIB_EN; + + AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data); + AT_WRITE_FLUSH(hw); + msleep(40); + phy_ctrl_data |= GPHY_CTRL_EXT_RESET; + AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data); + AT_WRITE_FLUSH(hw); + msleep(10); + + /*Enable PHY LinkChange Interrupt */ + err = atl1c_write_phy_reg(hw, MII_IER, mii_ier_data); + if (err) { + if (netif_msg_hw(adapter)) + dev_err(&pdev->dev, + "Error enable PHY linkChange Interrupt\n"); + return err; + } + if (!(hw->ctrl_flags & ATL1C_FPGA_VERSION)) + atl1c_phy_magic_data(hw); + return 0; +} + +int atl1c_phy_init(struct atl1c_hw *hw) +{ + struct atl1c_adapter *adapter = (struct atl1c_adapter *)hw->adapter; + struct pci_dev *pdev = adapter->pdev; + int ret_val; + u16 mii_bmcr_data = BMCR_RESET; + u16 phy_id1, phy_id2; + + if ((atl1c_read_phy_reg(hw, MII_PHYSID1, &phy_id1) != 0) || + (atl1c_read_phy_reg(hw, MII_PHYSID2, &phy_id2) != 0)) { + if (netif_msg_link(adapter)) + dev_err(&pdev->dev, "Error get phy ID\n"); + return -1; + } + switch (hw->media_type) { + case MEDIA_TYPE_AUTO_SENSOR: + ret_val = atl1c_phy_setup_adv(hw); + if (ret_val) { + if (netif_msg_link(adapter)) + dev_err(&pdev->dev, + "Error Setting up Auto-Negotiation\n"); + return ret_val; + } + mii_bmcr_data |= BMCR_AUTO_NEG_EN | BMCR_RESTART_AUTO_NEG; + break; + case MEDIA_TYPE_100M_FULL: + mii_bmcr_data |= BMCR_SPEED_100 | BMCR_FULL_DUPLEX; + break; + case MEDIA_TYPE_100M_HALF: + mii_bmcr_data |= BMCR_SPEED_100; + break; + case MEDIA_TYPE_10M_FULL: + mii_bmcr_data |= BMCR_SPEED_10 | BMCR_FULL_DUPLEX; + break; + case MEDIA_TYPE_10M_HALF: + mii_bmcr_data |= BMCR_SPEED_10; + break; + default: + if (netif_msg_link(adapter)) + dev_err(&pdev->dev, "Wrong Media type %d\n", + hw->media_type); + return -1; + break; + } + + ret_val = atl1c_write_phy_reg(hw, MII_BMCR, mii_bmcr_data); + if (ret_val) + return ret_val; + hw->phy_configured = true; + + return 0; +} + +/* + * Detects the current speed and duplex settings of the hardware. + * + * hw - Struct containing variables accessed by shared code + * speed - Speed of the connection + * duplex - Duplex setting of the connection + */ +int atl1c_get_speed_and_duplex(struct atl1c_hw *hw, u16 *speed, u16 *duplex) +{ + int err; + u16 phy_data; + + /* Read PHY Specific Status Register (17) */ + err = atl1c_read_phy_reg(hw, MII_GIGA_PSSR, &phy_data); + if (err) + return err; + + if (!(phy_data & GIGA_PSSR_SPD_DPLX_RESOLVED)) + return -1; + + switch (phy_data & GIGA_PSSR_SPEED) { + case GIGA_PSSR_1000MBS: + *speed = SPEED_1000; + break; + case GIGA_PSSR_100MBS: + *speed = SPEED_100; + break; + case GIGA_PSSR_10MBS: + *speed = SPEED_10; + break; + default: + return -1; + break; + } + + if (phy_data & GIGA_PSSR_DPLX) + *duplex = FULL_DUPLEX; + else + *duplex = HALF_DUPLEX; + + return 0; +} + +int atl1c_restart_autoneg(struct atl1c_hw *hw) +{ + int err = 0; + u16 mii_bmcr_data = BMCR_RESET; + + err = atl1c_phy_setup_adv(hw); + if (err) + return err; + mii_bmcr_data |= BMCR_AUTO_NEG_EN | BMCR_RESTART_AUTO_NEG; + + return atl1c_write_phy_reg(hw, MII_BMCR, mii_bmcr_data); +} |