diff options
Diffstat (limited to 'drivers/net/ethernet/freescale/fman/inc/Peripherals/fm_ext.h')
| -rw-r--r-- | drivers/net/ethernet/freescale/fman/inc/Peripherals/fm_ext.h | 1681 |
1 files changed, 1681 insertions, 0 deletions
diff --git a/drivers/net/ethernet/freescale/fman/inc/Peripherals/fm_ext.h b/drivers/net/ethernet/freescale/fman/inc/Peripherals/fm_ext.h new file mode 100644 index 0000000..6acf50b --- /dev/null +++ b/drivers/net/ethernet/freescale/fman/inc/Peripherals/fm_ext.h @@ -0,0 +1,1681 @@ +/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +/**************************************************************************//** + @File fm_ext.h + + @Description FM Application Programming Interface. +*//***************************************************************************/ +#ifndef __FM_EXT +#define __FM_EXT + +#include "error_ext.h" +#include "std_ext.h" +#include "dpaa_ext.h" + + +/**************************************************************************//** + @Group FM_grp Frame Manager API + + @Description FM API functions, definitions and enums. + + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Group FM_lib_grp FM library + + @Description FM API functions, definitions and enums + + The FM module is the main driver module and is a mandatory module + for FM driver users. This module must be initialized first prior + to any other drivers modules. + The FM is a "singleton" module. It is responsible of the common + HW modules: FPM, DMA, common QMI and common BMI initializations and + run-time control routines. This module must be initialized always + when working with any of the FM modules. + NOTE - We assume that the FM library will be initialized only by core No. 0! + + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Description Enum for defining port types +*//***************************************************************************/ +typedef enum e_FmPortType { + e_FM_PORT_TYPE_OH_OFFLINE_PARSING = 0, /**< Offline parsing port */ + e_FM_PORT_TYPE_RX, /**< 1G Rx port */ + e_FM_PORT_TYPE_RX_10G, /**< 10G Rx port */ + e_FM_PORT_TYPE_TX, /**< 1G Tx port */ + e_FM_PORT_TYPE_TX_10G, /**< 10G Tx port */ + e_FM_PORT_TYPE_DUMMY +} e_FmPortType; + +/**************************************************************************//** + @Collection General FM defines +*//***************************************************************************/ +#define FM_MAX_NUM_OF_PARTITIONS 64 /**< Maximum number of partitions */ +#define FM_PHYS_ADDRESS_SIZE 6 /**< FM Physical address size */ +/* @} */ + + +#if defined(__MWERKS__) && !defined(__GNUC__) +#pragma pack(push,1) +#endif /* defined(__MWERKS__) && ... */ + +/**************************************************************************//** + @Description FM physical Address +*//***************************************************************************/ +typedef _Packed struct t_FmPhysAddr { + volatile uint8_t high; /**< High part of the physical address */ + volatile uint32_t low; /**< Low part of the physical address */ +} _PackedType t_FmPhysAddr; + +/**************************************************************************//** + @Description Parse results memory layout +*//***************************************************************************/ +typedef _Packed struct t_FmPrsResult { + volatile uint8_t lpid; /**< Logical port id */ + volatile uint8_t shimr; /**< Shim header result */ + volatile uint16_t l2r; /**< Layer 2 result */ + volatile uint16_t l3r; /**< Layer 3 result */ + volatile uint8_t l4r; /**< Layer 4 result */ + volatile uint8_t cplan; /**< Classification plan id */ + volatile uint16_t nxthdr; /**< Next Header */ + volatile uint16_t cksum; /**< Running-sum */ + volatile uint16_t flags_frag_off; /**< Flags & fragment-offset field of the last IP-header */ + volatile uint8_t route_type; /**< Routing type field of a IPv6 routing extension header */ + volatile uint8_t rhp_ip_valid; /**< Routing Extension Header Present; last bit is IP valid */ + volatile uint8_t shim_off[2]; /**< Shim offset */ + volatile uint8_t ip_pid_off; /**< IP PID (last IP-proto) offset */ + volatile uint8_t eth_off; /**< ETH offset */ + volatile uint8_t llc_snap_off; /**< LLC_SNAP offset */ + volatile uint8_t vlan_off[2]; /**< VLAN offset */ + volatile uint8_t etype_off; /**< ETYPE offset */ + volatile uint8_t pppoe_off; /**< PPP offset */ + volatile uint8_t mpls_off[2]; /**< MPLS offset */ + volatile uint8_t ip_off[2]; /**< IP offset */ + volatile uint8_t gre_off; /**< GRE offset */ + volatile uint8_t l4_off; /**< Layer 4 offset */ + volatile uint8_t nxthdr_off; /**< Parser end point */ +} _PackedType t_FmPrsResult; + +/**************************************************************************//** + @Collection FM Parser results +*//***************************************************************************/ +#define FM_PR_L2_VLAN_STACK 0x00000100 /**< Parse Result: VLAN stack */ +#define FM_PR_L2_ETHERNET 0x00008000 /**< Parse Result: Ethernet*/ +#define FM_PR_L2_VLAN 0x00004000 /**< Parse Result: VLAN */ +#define FM_PR_L2_LLC_SNAP 0x00002000 /**< Parse Result: LLC_SNAP */ +#define FM_PR_L2_MPLS 0x00001000 /**< Parse Result: MPLS */ +#define FM_PR_L2_PPPoE 0x00000800 /**< Parse Result: PPPoE */ +/* @} */ + +/**************************************************************************//** + @Collection FM Frame descriptor macros +*//***************************************************************************/ +#define FM_FD_CMD_FCO 0x80000000 /**< Frame queue Context Override */ +#define FM_FD_CMD_RPD 0x40000000 /**< Read Prepended Data */ +#define FM_FD_CMD_UPD 0x20000000 /**< Update Prepended Data */ +#define FM_FD_CMD_DTC 0x10000000 /**< Do L4 Checksum */ +#define FM_FD_CMD_DCL4C 0x10000000 /**< Didn't calculate L4 Checksum */ +#define FM_FD_CMD_CFQ 0x00ffffff /**< Confirmation Frame Queue */ + +#define FM_FD_ERR_UNSUPPORTED_FORMAT 0x04000000 /**< Not for Rx-Port! Unsupported Format */ +#define FM_FD_ERR_LENGTH 0x02000000 /**< Not for Rx-Port! Length Error */ +#define FM_FD_ERR_DMA 0x01000000 /**< DMA Data error */ + +#define FM_FD_IPR 0x00000001 /**< IPR frame (not error) */ + +#define FM_FD_ERR_IPR_NCSP (0x00100000 | FM_FD_IPR) /**< IPR non-consistent-sp */ +#define FM_FD_ERR_IPR (0x00200000 | FM_FD_IPR) /**< IPR error */ +#define FM_FD_ERR_IPR_TO (0x00300000 | FM_FD_IPR) /**< IPR timeout */ + +#ifdef FM_CAPWAP_SUPPORT +#define FM_FD_ERR_CRE 0x00200000 +#define FM_FD_ERR_CHE 0x00100000 +#endif /* FM_CAPWAP_SUPPORT */ + +#define FM_FD_ERR_PHYSICAL 0x00080000 /**< Rx FIFO overflow, FCS error, code error, running disparity + error (SGMII and TBI modes), FIFO parity error. PHY + Sequence error, PHY error control character detected. */ +#define FM_FD_ERR_SIZE 0x00040000 /**< Frame too long OR Frame size exceeds max_length_frame */ +#define FM_FD_ERR_CLS_DISCARD 0x00020000 /**< classification discard */ +#define FM_FD_ERR_EXTRACTION 0x00008000 /**< Extract Out of Frame */ +#define FM_FD_ERR_NO_SCHEME 0x00004000 /**< No Scheme Selected */ +#define FM_FD_ERR_KEYSIZE_OVERFLOW 0x00002000 /**< Keysize Overflow */ +#define FM_FD_ERR_COLOR_RED 0x00000800 /**< Frame color is red */ +#define FM_FD_ERR_COLOR_YELLOW 0x00000400 /**< Frame color is yellow */ +#define FM_FD_ERR_ILL_PLCR 0x00000200 /**< Illegal Policer Profile selected */ +#define FM_FD_ERR_PLCR_FRAME_LEN 0x00000100 /**< Policer frame length error */ +#define FM_FD_ERR_PRS_TIMEOUT 0x00000080 /**< Parser Time out Exceed */ +#define FM_FD_ERR_PRS_ILL_INSTRUCT 0x00000040 /**< Invalid Soft Parser instruction */ +#define FM_FD_ERR_PRS_HDR_ERR 0x00000020 /**< Header error was identified during parsing */ +#define FM_FD_ERR_BLOCK_LIMIT_EXCEEDED 0x00000008 /**< Frame parsed beyind 256 first bytes */ + +#define FM_FD_TX_STATUS_ERR_MASK (FM_FD_ERR_UNSUPPORTED_FORMAT | \ + FM_FD_ERR_LENGTH | \ + FM_FD_ERR_DMA) /**< TX Error FD bits */ + +#define FM_FD_RX_STATUS_ERR_MASK (FM_FD_ERR_UNSUPPORTED_FORMAT | \ + FM_FD_ERR_LENGTH | \ + FM_FD_ERR_DMA | \ + FM_FD_ERR_IPR | \ + FM_FD_ERR_IPR_TO | \ + FM_FD_ERR_IPR_NCSP | \ + FM_FD_ERR_PHYSICAL | \ + FM_FD_ERR_SIZE | \ + FM_FD_ERR_CLS_DISCARD | \ + FM_FD_ERR_COLOR_RED | \ + FM_FD_ERR_COLOR_YELLOW | \ + FM_FD_ERR_ILL_PLCR | \ + FM_FD_ERR_PLCR_FRAME_LEN | \ + FM_FD_ERR_EXTRACTION | \ + FM_FD_ERR_NO_SCHEME | \ + FM_FD_ERR_KEYSIZE_OVERFLOW | \ + FM_FD_ERR_PRS_TIMEOUT | \ + FM_FD_ERR_PRS_ILL_INSTRUCT | \ + FM_FD_ERR_PRS_HDR_ERR | \ + FM_FD_ERR_BLOCK_LIMIT_EXCEEDED) /**< RX Error FD bits */ + +#define FM_FD_RX_STATUS_ERR_NON_FM 0x00400000 /**< non Frame-Manager error */ +/* @} */ + +/**************************************************************************//** + @Description Context A +*//***************************************************************************/ +typedef _Packed struct t_FmContextA { + volatile uint32_t command; /**< ContextA Command */ + volatile uint8_t res0[4]; /**< ContextA Reserved bits */ +} _PackedType t_FmContextA; + +/**************************************************************************//** + @Description Context B +*//***************************************************************************/ +typedef uint32_t t_FmContextB; + +/**************************************************************************//** + @Collection Special Operation options +*//***************************************************************************/ +typedef uint32_t fmSpecialOperations_t; /**< typedef for defining Special Operation options */ + +#define FM_SP_OP_IPSEC 0x80000000 /**< activate features that related to IPSec (e.g fix Eth-type) */ +#define FM_SP_OP_IPSEC_UPDATE_UDP_LEN 0x40000000 /**< update the UDP-Len after Encryption */ +#define FM_SP_OP_IPSEC_MANIP 0x20000000 /**< handle the IPSec-manip options */ +#define FM_SP_OP_RPD 0x10000000 /**< Set the RPD bit */ +#define FM_SP_OP_DCL4C 0x08000000 /**< Set the DCL4C bit */ +#define FM_SP_OP_CHECK_SEC_ERRORS 0x04000000 /**< Check SEC errors */ +/* @} */ + +/**************************************************************************//** + @Collection Context A macros +*//***************************************************************************/ +#define FM_CONTEXTA_OVERRIDE_MASK 0x80000000 +#define FM_CONTEXTA_ICMD_MASK 0x40000000 +#define FM_CONTEXTA_A1_VALID_MASK 0x20000000 +#define FM_CONTEXTA_MACCMD_MASK 0x00ff0000 +#define FM_CONTEXTA_MACCMD_VALID_MASK 0x00800000 +#define FM_CONTEXTA_MACCMD_SECURED_MASK 0x00100000 +#define FM_CONTEXTA_MACCMD_SC_MASK 0x000f0000 +#define FM_CONTEXTA_A1_MASK 0x0000ffff + +#define FM_CONTEXTA_GET_OVERRIDE(contextA) ((((t_FmContextA *)contextA)->command & FM_CONTEXTA_OVERRIDE_MASK) >> (31-0)) +#define FM_CONTEXTA_GET_ICMD(contextA) ((((t_FmContextA *)contextA)->command & FM_CONTEXTA_ICMD_MASK) >> (31-1)) +#define FM_CONTEXTA_GET_A1_VALID(contextA) ((((t_FmContextA *)contextA)->command & FM_CONTEXTA_A1_VALID_MASK) >> (31-2)) +#define FM_CONTEXTA_GET_A1(contextA) ((((t_FmContextA *)contextA)->command & FM_CONTEXTA_A1_MASK) >> (31-31)) +#define FM_CONTEXTA_GET_MACCMD(contextA) ((((t_FmContextA *)contextA)->command & FM_CONTEXTA_MACCMD_MASK) >> (31-15)) +#define FM_CONTEXTA_GET_MACCMD_VALID(contextA) ((((t_FmContextA *)contextA)->command & FM_CONTEXTA_MACCMD_VALID_MASK) >> (31-8)) +#define FM_CONTEXTA_GET_MACCMD_SECURED(contextA) ((((t_FmContextA *)contextA)->command & FM_CONTEXTA_MACCMD_SECURED_MASK) >> (31-11)) +#define FM_CONTEXTA_GET_MACCMD_SECURE_CHANNEL(contextA) ((((t_FmContextA *)contextA)->command & FM_CONTEXTA_MACCMD_SC_MASK) >> (31-15)) + +#define FM_CONTEXTA_SET_OVERRIDE(contextA,val) (((t_FmContextA *)contextA)->command = (uint32_t)((((t_FmContextA *)contextA)->command & ~FM_CONTEXTA_OVERRIDE_MASK) | (((uint32_t)(val) << (31-0)) & FM_CONTEXTA_OVERRIDE_MASK) )) +#define FM_CONTEXTA_SET_ICMD(contextA,val) (((t_FmContextA *)contextA)->command = (uint32_t)((((t_FmContextA *)contextA)->command & ~FM_CONTEXTA_ICMD_MASK) | (((val) << (31-1)) & FM_CONTEXTA_ICMD_MASK) )) +#define FM_CONTEXTA_SET_A1_VALID(contextA,val) (((t_FmContextA *)contextA)->command = (uint32_t)((((t_FmContextA *)contextA)->command & ~FM_CONTEXTA_A1_VALID_MASK) | (((val) << (31-2)) & FM_CONTEXTA_A1_VALID_MASK) )) +#define FM_CONTEXTA_SET_A1(contextA,val) (((t_FmContextA *)contextA)->command = (uint32_t)((((t_FmContextA *)contextA)->command & ~FM_CONTEXTA_A1_MASK) | (((val) << (31-31)) & FM_CONTEXTA_A1_MASK) )) +#define FM_CONTEXTA_SET_MACCMD(contextA,val) (((t_FmContextA *)contextA)->command = (uint32_t)((((t_FmContextA *)contextA)->command & ~FM_CONTEXTA_MACCMD_MASK) | (((val) << (31-15)) & FM_CONTEXTA_MACCMD_MASK) )) +#define FM_CONTEXTA_SET_MACCMD_VALID(contextA,val) (((t_FmContextA *)contextA)->command = (uint32_t)((((t_FmContextA *)contextA)->command & ~FM_CONTEXTA_MACCMD_VALID_MASK) | (((val) << (31-8)) & FM_CONTEXTA_MACCMD_VALID_MASK) )) +#define FM_CONTEXTA_SET_MACCMD_SECURED(contextA,val) (((t_FmContextA *)contextA)->command = (uint32_t)((((t_FmContextA *)contextA)->command & ~FM_CONTEXTA_MACCMD_SECURED_MASK) | (((val) << (31-11)) & FM_CONTEXTA_MACCMD_SECURED_MASK) )) +#define FM_CONTEXTA_SET_MACCMD_SECURE_CHANNEL(contextA,val) (((t_FmContextA *)contextA)->command = (uint32_t)((((t_FmContextA *)contextA)->command & ~FM_CONTEXTA_MACCMD_SC_MASK) | (((val) << (31-15)) & FM_CONTEXTA_MACCMD_SC_MASK) )) +/* @} */ + +/**************************************************************************//** + @Collection Context B macros +*//***************************************************************************/ +#define FM_CONTEXTB_FQID_MASK 0x00ffffff + +#define FM_CONTEXTB_GET_FQID(contextB) (*((t_FmContextB *)contextB) & FM_CONTEXTB_FQID_MASK) +#define FM_CONTEXTB_SET_FQID(contextB,val) (*((t_FmContextB *)contextB) = ((*((t_FmContextB *)contextB) & ~FM_CONTEXTB_FQID_MASK) | ((val) & FM_CONTEXTB_FQID_MASK))) +/* @} */ + +#if defined(__MWERKS__) && !defined(__GNUC__) +#pragma pack(pop) +#endif /* defined(__MWERKS__) && ... */ + + +/**************************************************************************//** + @Description FM Exceptions +*//***************************************************************************/ +typedef enum e_FmExceptions { + e_FM_EX_DMA_BUS_ERROR = 0, /**< DMA bus error. */ + e_FM_EX_DMA_READ_ECC, /**< Read Buffer ECC error (Valid for FM rev < 6)*/ + e_FM_EX_DMA_SYSTEM_WRITE_ECC, /**< Write Buffer ECC error on system side (Valid for FM rev < 6)*/ + e_FM_EX_DMA_FM_WRITE_ECC, /**< Write Buffer ECC error on FM side (Valid for FM rev < 6)*/ + e_FM_EX_DMA_SINGLE_PORT_ECC, /**< Single Port ECC error on FM side (Valid for FM rev > 6)*/ + e_FM_EX_FPM_STALL_ON_TASKS, /**< Stall of tasks on FPM */ + e_FM_EX_FPM_SINGLE_ECC, /**< Single ECC on FPM. */ + e_FM_EX_FPM_DOUBLE_ECC, /**< Double ECC error on FPM ram access */ + e_FM_EX_QMI_SINGLE_ECC, /**< Single ECC on QMI. */ + e_FM_EX_QMI_DOUBLE_ECC, /**< Double bit ECC occurred on QMI */ + e_FM_EX_QMI_DEQ_FROM_UNKNOWN_PORTID,/**< Dequeue from unknown port id */ + e_FM_EX_BMI_LIST_RAM_ECC, /**< Linked List RAM ECC error */ + e_FM_EX_BMI_STORAGE_PROFILE_ECC, /**< Storage Profile ECC Error */ + e_FM_EX_BMI_STATISTICS_RAM_ECC, /**< Statistics Count RAM ECC Error Enable */ + e_FM_EX_BMI_DISPATCH_RAM_ECC, /**< Dispatch RAM ECC Error Enable */ + e_FM_EX_IRAM_ECC, /**< Double bit ECC occurred on IRAM*/ + e_FM_EX_MURAM_ECC /**< Double bit ECC occurred on MURAM*/ +} e_FmExceptions; + +/**************************************************************************//** + @Description Enum for defining port DMA swap mode +*//***************************************************************************/ +typedef enum e_FmDmaSwapOption { + e_FM_DMA_NO_SWP, /**< No swap, transfer data as is.*/ + e_FM_DMA_SWP_PPC_LE, /**< The transferred data should be swapped + in PowerPc Little Endian mode. */ + e_FM_DMA_SWP_BE /**< The transferred data should be swapped + in Big Endian mode */ +} e_FmDmaSwapOption; + +/**************************************************************************//** + @Description Enum for defining port DMA cache attributes +*//***************************************************************************/ +typedef enum e_FmDmaCacheOption { + e_FM_DMA_NO_STASH = 0, /**< Cacheable, no Allocate (No Stashing) */ + e_FM_DMA_STASH = 1 /**< Cacheable and Allocate (Stashing on) */ +} e_FmDmaCacheOption; + + +/**************************************************************************//** + @Group FM_init_grp FM Initialization Unit + + @Description FM Initialization Unit + + Initialization Flow + Initialization of the FM Module will be carried out by the application + according to the following sequence: + - Calling the configuration routine with basic parameters. + - Calling the advance initialization routines to change driver's defaults. + - Calling the initialization routine. + + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Function t_FmExceptionsCallback + + @Description Exceptions user callback routine, will be called upon an + exception passing the exception identification. + + @Param[in] h_App - User's application descriptor. + @Param[in] exception - The exception. +*//***************************************************************************/ +typedef void (t_FmExceptionsCallback)(t_Handle h_App, + e_FmExceptions exception); + + +/**************************************************************************//** + @Function t_FmBusErrorCallback + + @Description Bus error user callback routine, will be called upon a + bus error, passing parameters describing the errors and the owner. + + @Param[in] h_App - User's application descriptor. + @Param[in] portType - Port type (e_FmPortType) + @Param[in] portId - Port id - relative to type. + @Param[in] addr - Address that caused the error + @Param[in] tnum - Owner of error + @Param[in] liodn - Logical IO device number +*//***************************************************************************/ +typedef void (t_FmBusErrorCallback) (t_Handle h_App, + e_FmPortType portType, + uint8_t portId, + uint64_t addr, + uint8_t tnum, + uint16_t liodn); + +/**************************************************************************//** + @Description A structure for defining buffer prefix area content. +*//***************************************************************************/ +typedef struct t_FmBufferPrefixContent { + uint16_t privDataSize; /**< Number of bytes to be left at the beginning + of the external buffer; Note that the private-area will + start from the base of the buffer address. */ + bool passPrsResult; /**< TRUE to pass the parse result to/from the FM; + User may use FM_PORT_GetBufferPrsResult() in order to + get the parser-result from a buffer. */ + bool passTimeStamp; /**< TRUE to pass the timeStamp to/from the FM + User may use FM_PORT_GetBufferTimeStamp() in order to + get the parser-result from a buffer. */ + bool passHashResult; /**< TRUE to pass the KG hash result to/from the FM + User may use FM_PORT_GetBufferHashResult() in order to + get the parser-result from a buffer. */ + bool passAllOtherPCDInfo;/**< Add all other Internal-Context information: + AD, hash-result, key, etc. */ + uint16_t dataAlign; /**< 0 to use driver's default alignment [64], + other value for selecting a data alignment (must be a power of 2); + if write optimization is used, must be >= 16. */ + uint8_t manipExtraSpace; /**< Maximum extra size needed (insertion-size minus removal-size); + Note that this field impacts the size of the buffer-prefix + (i.e. it pushes the data offset); + This field is irrelevant if DPAA_VERSION==10 */ +} t_FmBufferPrefixContent; + +/**************************************************************************//** + @Description A structure of information about each of the external + buffer pools used by a port or storage-profile. +*//***************************************************************************/ +typedef struct t_FmExtPoolParams { + uint8_t id; /**< External buffer pool id */ + uint16_t size; /**< External buffer pool buffer size */ +} t_FmExtPoolParams; + +/**************************************************************************//** + @Description A structure for informing the driver about the external + buffer pools allocated in the BM and used by a port or a + storage-profile. +*//***************************************************************************/ +typedef struct t_FmExtPools { + uint8_t numOfPoolsUsed; /**< Number of pools use by this port */ + t_FmExtPoolParams extBufPool[FM_PORT_MAX_NUM_OF_EXT_POOLS]; + /**< Parameters for each port */ +} t_FmExtPools; + +/**************************************************************************//** + @Description A structure for defining backup BM Pools. +*//***************************************************************************/ +typedef struct t_FmBackupBmPools { + uint8_t numOfBackupPools; /**< Number of BM backup pools - + must be smaller than the total number of + pools defined for the specified port.*/ + uint8_t poolIds[FM_PORT_MAX_NUM_OF_EXT_POOLS]; + /**< numOfBackupPools pool id's, specifying which + pools should be used only as backup. Pool + id's specified here must be a subset of the + pools used by the specified port.*/ +} t_FmBackupBmPools; + +/**************************************************************************//** + @Description A structure for defining BM pool depletion criteria +*//***************************************************************************/ +typedef struct t_FmBufPoolDepletion { + bool poolsGrpModeEnable; /**< select mode in which pause frames will be sent after + a number of pools (all together!) are depleted */ + uint8_t numOfPools; /**< the number of depleted pools that will invoke + pause frames transmission. */ + bool poolsToConsider[BM_MAX_NUM_OF_POOLS]; + /**< For each pool, TRUE if it should be considered for + depletion (Note - this pool must be used by this port!). */ + bool singlePoolModeEnable; /**< select mode in which pause frames will be sent after + a single-pool is depleted; */ + bool poolsToConsiderForSingleMode[BM_MAX_NUM_OF_POOLS]; + /**< For each pool, TRUE if it should be considered for + depletion (Note - this pool must be used by this port!) */ +#if (DPAA_VERSION >= 11) + bool pfcPrioritiesEn[FM_MAX_NUM_OF_PFC_PRIORITIES]; + /**< This field is used by the MAC as the Priority Enable Vector in the PFC frame which is transmitted */ +#endif /* (DPAA_VERSION >= 11) */ +} t_FmBufPoolDepletion; + +/**************************************************************************//** + @Description A Structure for defining Ucode patch for loading. +*//***************************************************************************/ +typedef struct t_FmFirmwareParams { + uint32_t size; /**< Size of uCode */ + uint32_t *p_Code; /**< A pointer to the uCode */ +} t_FmFirmwareParams; + +/**************************************************************************//** + @Description A Structure for defining FM initialization parameters +*//***************************************************************************/ +typedef struct t_FmParams { + uint8_t fmId; /**< Index of the FM */ + uint8_t guestId; /**< FM Partition Id */ + uintptr_t baseAddr; /**< A pointer to base of memory mapped FM registers (virtual); + this field is optional when the FM runs in "guest-mode" + (i.e. guestId != NCSW_MASTER_ID); in that case, the driver will + use the memory-map instead of calling the IPC where possible; + NOTE that this should include ALL common registers of the FM including + the PCD registers area (i.e. until the VSP pages - 880KB). */ + t_Handle h_FmMuram; /**< A handle of an initialized MURAM object, + to be used by the FM. */ + uint16_t fmClkFreq; /**< In Mhz; + Relevant when FM not runs in "guest-mode". */ + t_FmExceptionsCallback *f_Exception; /**< An application callback routine to handle exceptions; + Relevant when FM not runs in "guest-mode". */ + t_FmBusErrorCallback *f_BusError; /**< An application callback routine to handle exceptions; + Relevant when FM not runs in "guest-mode". */ + t_Handle h_App; /**< A handle to an application layer object; This handle will + be passed by the driver upon calling the above callbacks; + Relevant when FM not runs in "guest-mode". */ + int irq; /**< FM interrupt source for normal events; + Relevant when FM not runs in "guest-mode". */ + int errIrq; /**< FM interrupt source for errors; + Relevant when FM not runs in "guest-mode". */ + t_FmFirmwareParams firmware; /**< The firmware parameters structure; + Relevant when FM not runs in "guest-mode". */ + +#if (DPAA_VERSION >= 11) + uintptr_t vspBaseAddr; /**< A pointer to base of memory mapped FM VSP registers (virtual); + i.e. up to 24KB, depending on the specific chip. */ + uint8_t partVSPBase; /**< The first Virtual-Storage-Profile-id dedicated to this partition. + NOTE: this parameter relevant only when working with multiple partitions. */ + uint8_t partNumOfVSPs; /**< Number of VSPs dedicated to this partition. + NOTE: this parameter relevant only when working with multiple partitions. */ +#endif /* (DPAA_VERSION >= 11) */ +} t_FmParams; + + +/**************************************************************************//** + @Function FM_Config + + @Description Creates the FM module and returns its handle (descriptor). + This descriptor must be passed as first parameter to all other + FM function calls. + + No actual initialization or configuration of FM hardware is + done by this routine. All FM parameters get default values that + may be changed by calling one or more of the advance config routines. + + @Param[in] p_FmParams - A pointer to a data structure of mandatory FM parameters + + @Return A handle to the FM object, or NULL for Failure. +*//***************************************************************************/ +t_Handle FM_Config(t_FmParams *p_FmParams); + +/**************************************************************************//** + @Function FM_Init + + @Description Initializes the FM module by defining the software structure + and configuring the hardware registers. + + @Param[in] h_Fm - FM module descriptor + + @Return E_OK on success; Error code otherwise. +*//***************************************************************************/ +t_Error FM_Init(t_Handle h_Fm); + +/**************************************************************************//** + @Function FM_Free + + @Description Frees all resources that were assigned to FM module. + + Calling this routine invalidates the descriptor. + + @Param[in] h_Fm - FM module descriptor + + @Return E_OK on success; Error code otherwise. +*//***************************************************************************/ +t_Error FM_Free(t_Handle h_Fm); + + +/**************************************************************************//** + @Group FM_advanced_init_grp FM Advanced Configuration Unit + + @Description Advanced configuration routines are optional routines that may + be called in order to change the default driver settings. + + Note: Advanced configuration routines are not available for guest partition. + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Description Enum for selecting DMA debug mode +*//***************************************************************************/ +typedef enum e_FmDmaDbgCntMode { + e_FM_DMA_DBG_NO_CNT = 0, /**< No counting */ + e_FM_DMA_DBG_CNT_DONE, /**< Count DONE commands */ + e_FM_DMA_DBG_CNT_COMM_Q_EM, /**< count command queue emergency signals */ + e_FM_DMA_DBG_CNT_INT_READ_EM, /**< Count Internal Read buffer emergency signal */ + e_FM_DMA_DBG_CNT_INT_WRITE_EM, /**< Count Internal Write buffer emergency signal */ + e_FM_DMA_DBG_CNT_FPM_WAIT, /**< Count FPM WAIT signal */ + e_FM_DMA_DBG_CNT_SIGLE_BIT_ECC, /**< Single bit ECC errors. */ + e_FM_DMA_DBG_CNT_RAW_WAR_PROT /**< Number of times there was a need for RAW & WAR protection. */ +} e_FmDmaDbgCntMode; + +/**************************************************************************//** + @Description Enum for selecting DMA Cache Override +*//***************************************************************************/ +typedef enum e_FmDmaCacheOverride { + e_FM_DMA_NO_CACHE_OR = 0, /**< No override of the Cache field */ + e_FM_DMA_NO_STASH_DATA, /**< Data should not be stashed in system level cache */ + e_FM_DMA_MAY_STASH_DATA, /**< Data may be stashed in system level cache */ + e_FM_DMA_STASH_DATA /**< Data should be stashed in system level cache */ +} e_FmDmaCacheOverride; + +/**************************************************************************//** + @Description Enum for selecting DMA External Bus Priority +*//***************************************************************************/ +typedef enum e_FmDmaExtBusPri { + e_FM_DMA_EXT_BUS_NORMAL = 0, /**< Normal priority */ + e_FM_DMA_EXT_BUS_EBS, /**< AXI extended bus service priority */ + e_FM_DMA_EXT_BUS_SOS, /**< AXI sos priority */ + e_FM_DMA_EXT_BUS_EBS_AND_SOS /**< AXI ebs + sos priority */ +} e_FmDmaExtBusPri; + +/**************************************************************************//** + @Description Enum for choosing the field that will be output on AID +*//***************************************************************************/ +typedef enum e_FmDmaAidMode { + e_FM_DMA_AID_OUT_PORT_ID = 0, /**< 4 LSB of PORT_ID */ + e_FM_DMA_AID_OUT_TNUM /**< 4 LSB of TNUM */ +} e_FmDmaAidMode; + +/**************************************************************************//** + @Description Enum for selecting FPM Catastrophic error behavior +*//***************************************************************************/ +typedef enum e_FmCatastrophicErr { + e_FM_CATASTROPHIC_ERR_STALL_PORT = 0, /**< Port_ID is stalled (only reset can release it) */ + e_FM_CATASTROPHIC_ERR_STALL_TASK /**< Only erroneous task is stalled */ +} e_FmCatastrophicErr; + +/**************************************************************************//** + @Description Enum for selecting FPM DMA Error behavior +*//***************************************************************************/ +typedef enum e_FmDmaErr { + e_FM_DMA_ERR_CATASTROPHIC = 0, /**< Dma error is treated as a catastrophic + error (e_FmCatastrophicErr)*/ + e_FM_DMA_ERR_REPORT /**< Dma error is just reported */ +} e_FmDmaErr; + +/**************************************************************************//** + @Description Enum for selecting DMA Emergency level by BMI emergency signal +*//***************************************************************************/ +typedef enum e_FmDmaEmergencyLevel { + e_FM_DMA_EM_EBS = 0, /**< EBS emergency */ + e_FM_DMA_EM_SOS /**< SOS emergency */ +} e_FmDmaEmergencyLevel; + +/**************************************************************************//** + @Collection Enum for selecting DMA Emergency options +*//***************************************************************************/ +typedef uint32_t fmEmergencyBus_t; /**< DMA emergency options */ + +#define FM_DMA_MURAM_READ_EMERGENCY 0x00800000 /**< Enable emergency for MURAM1 */ +#define FM_DMA_MURAM_WRITE_EMERGENCY 0x00400000 /**< Enable emergency for MURAM2 */ +#define FM_DMA_EXT_BUS_EMERGENCY 0x00100000 /**< Enable emergency for external bus */ +/* @} */ + +/**************************************************************************//** + @Description A structure for defining DMA emergency level +*//***************************************************************************/ +typedef struct t_FmDmaEmergency { + fmEmergencyBus_t emergencyBusSelect; /**< An OR of the busses where emergency + should be enabled */ + e_FmDmaEmergencyLevel emergencyLevel; /**< EBS/SOS */ +} t_FmDmaEmergency; + +/**************************************************************************//* + @Description structure for defining FM threshold +*//***************************************************************************/ +typedef struct t_FmThresholds { + uint8_t dispLimit; /**< The number of times a frames may + be passed in the FM before assumed to + be looping. */ + uint8_t prsDispTh; /**< This is the number pf packets that may be + queued in the parser dispatch queue*/ + uint8_t plcrDispTh; /**< This is the number pf packets that may be + queued in the policer dispatch queue*/ + uint8_t kgDispTh; /**< This is the number pf packets that may be + queued in the keygen dispatch queue*/ + uint8_t bmiDispTh; /**< This is the number pf packets that may be + queued in the BMI dispatch queue*/ + uint8_t qmiEnqDispTh; /**< This is the number pf packets that may be + queued in the QMI enqueue dispatch queue*/ + uint8_t qmiDeqDispTh; /**< This is the number pf packets that may be + queued in the QMI dequeue dispatch queue*/ + uint8_t fmCtl1DispTh; /**< This is the number pf packets that may be + queued in fmCtl1 dispatch queue*/ + uint8_t fmCtl2DispTh; /**< This is the number pf packets that may be + queued in fmCtl2 dispatch queue*/ +} t_FmThresholds; + +/**************************************************************************//* + @Description structure for defining DMA thresholds +*//***************************************************************************/ +typedef struct t_FmDmaThresholds { + uint8_t assertEmergency; /**< When this value is reached, + assert emergency (Threshold)*/ + uint8_t clearEmergency; /**< After emergency is asserted, it is held + until this value is reached (Hystheresis) */ +} t_FmDmaThresholds; + + +/**************************************************************************//** + @Function FM_ConfigResetOnInit + + @Description Define whether to reset the FM before initialization. + Change the default configuration [FALSE]. + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] enable When TRUE, FM will be reset before any initialization. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigResetOnInit(t_Handle h_Fm, bool enable); + +/**************************************************************************//** + @Function FM_ConfigTotalFifoSize + + @Description Define Total FIFO size for the whole FM. + Calling this routine changes the total Fifo size in the internal driver + data base from its default configuration [major] + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] totalFifoSize The selected new value. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigTotalFifoSize(t_Handle h_Fm, uint32_t totalFifoSize); + + /**************************************************************************//** + @Function FM_ConfigDmaCacheOverride + + @Description Define cache override mode. + Calling this routine changes the cache override mode + in the internal driver data base from its default configuration [e_FM_DMA_NO_CACHE_OR] + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] cacheOverride The selected new value. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigDmaCacheOverride(t_Handle h_Fm, e_FmDmaCacheOverride cacheOverride); + +/**************************************************************************//** + @Function FM_ConfigDmaAidOverride + + @Description Define DMA AID override mode. + Calling this routine changes the AID override mode + in the internal driver data base from its default configuration [TRUE] + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] aidOverride The selected new value. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigDmaAidOverride(t_Handle h_Fm, bool aidOverride); + +/**************************************************************************//** + @Function FM_ConfigDmaAidMode + + @Description Define DMA AID mode. + Calling this routine changes the AID mode in the internal + driver data base from its default configuration [e_FM_DMA_AID_OUT_TNUM] + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] aidMode The selected new value. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigDmaAidMode(t_Handle h_Fm, e_FmDmaAidMode aidMode); + +/**************************************************************************//** + @Function FM_ConfigDmaAxiDbgNumOfBeats + + @Description Define DMA AXI number of beats. + Calling this routine changes the AXI number of beats in the internal + driver data base from its default configuration [1] + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] axiDbgNumOfBeats The selected new value. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigDmaAxiDbgNumOfBeats(t_Handle h_Fm, uint8_t axiDbgNumOfBeats); + +/**************************************************************************//** + @Function FM_ConfigDmaCamNumOfEntries + + @Description Define number of CAM entries. + Calling this routine changes the number of CAM entries in the internal + driver data base from its default configuration [32]. + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] numOfEntries The selected new value. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigDmaCamNumOfEntries(t_Handle h_Fm, uint8_t numOfEntries); + +/**************************************************************************//** + @Function FM_ConfigEnableCounters + + @Description Obsolete, always return E_OK. + + @Param[in] h_Fm A handle to an FM Module. + + @Return E_OK on success; Error code otherwise. +*//***************************************************************************/ +t_Error FM_ConfigEnableCounters(t_Handle h_Fm); + +/**************************************************************************//** + @Function FM_ConfigDmaDbgCounter + + @Description Define DMA debug counter. + Calling this routine changes the number of the DMA debug counter in the internal + driver data base from its default configuration [e_FM_DMA_DBG_NO_CNT]. + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] fmDmaDbgCntMode An enum selecting the debug counter mode. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigDmaDbgCounter(t_Handle h_Fm, e_FmDmaDbgCntMode fmDmaDbgCntMode); + +/**************************************************************************//** + @Function FM_ConfigDmaStopOnBusErr + + @Description Define bus error behavior. + Calling this routine changes the bus error behavior definition + in the internal driver data base from its default + configuration [FALSE]. + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] stop TRUE to stop on bus error, FALSE to continue. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + Only if bus error is enabled. + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigDmaStopOnBusErr(t_Handle h_Fm, bool stop); + +/**************************************************************************//** + @Function FM_ConfigDmaEmergency + + @Description Define DMA emergency. + Calling this routine changes the DMA emergency definition + in the internal driver data base from its default + configuration where's it's disabled. + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] p_Emergency An OR mask of all required options. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigDmaEmergency(t_Handle h_Fm, t_FmDmaEmergency *p_Emergency); + +/**************************************************************************//** + @Function FM_ConfigDmaErr + + @Description DMA error treatment. + Calling this routine changes the DMA error treatment + in the internal driver data base from its default + configuration [e_FM_DMA_ERR_CATASTROPHIC]. + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] dmaErr The selected new choice. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigDmaErr(t_Handle h_Fm, e_FmDmaErr dmaErr); + +/**************************************************************************//** + @Function FM_ConfigCatastrophicErr + + @Description Define FM behavior on catastrophic error. + Calling this routine changes the FM behavior on catastrophic + error in the internal driver data base from its default + [e_FM_CATASTROPHIC_ERR_STALL_PORT]. + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] catastrophicErr The selected new choice. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigCatastrophicErr(t_Handle h_Fm, e_FmCatastrophicErr catastrophicErr); + +/**************************************************************************//** + @Function FM_ConfigEnableMuramTestMode + + @Description Enable MURAM test mode. + Calling this routine changes the internal driver data base + from its default selection of test mode where it's disabled. + This routine is only avaiable on old FM revisions (FMan v2). + + @Param[in] h_Fm A handle to an FM Module. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigEnableMuramTestMode(t_Handle h_Fm); + +/**************************************************************************//** + @Function FM_ConfigEnableIramTestMode + + @Description Enable IRAM test mode. + Calling this routine changes the internal driver data base + from its default selection of test mode where it's disabled. + This routine is only avaiable on old FM revisions (FMan v2). + + @Param[in] h_Fm A handle to an FM Module. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigEnableIramTestMode(t_Handle h_Fm); + +/**************************************************************************//** + @Function FM_ConfigHaltOnExternalActivation + + @Description Define FM behavior on external halt activation. + Calling this routine changes the FM behavior on external halt + activation in the internal driver data base from its default + [FALSE]. + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] enable TRUE to enable halt on external halt + activation. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigHaltOnExternalActivation(t_Handle h_Fm, bool enable); + +/**************************************************************************//** + @Function FM_ConfigHaltOnUnrecoverableEccError + + @Description Define FM behavior on external halt activation. + Calling this routine changes the FM behavior on unrecoverable + ECC error in the internal driver data base from its default + [FALSE]. + This routine is only avaiable on old FM revisions (FMan v2). + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] enable TRUE to enable halt on unrecoverable Ecc error + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigHaltOnUnrecoverableEccError(t_Handle h_Fm, bool enable); + +/**************************************************************************//** + @Function FM_ConfigException + + @Description Define FM exceptions. + Calling this routine changes the exceptions defaults in the + internal driver data base where all exceptions are enabled. + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] exception The exception to be selected. + @Param[in] enable TRUE to enable interrupt, FALSE to mask it. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigException(t_Handle h_Fm, e_FmExceptions exception, bool enable); + +/**************************************************************************//** + @Function FM_ConfigExternalEccRamsEnable + + @Description Select external ECC enabling. + Calling this routine changes the ECC enabling control in the internal + driver data base from its default [FALSE]. + When this option is enabled Rams ECC enabling is not effected + by FM_EnableRamsEcc/FM_DisableRamsEcc, but by a JTAG. + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] enable TRUE to enable this option. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigExternalEccRamsEnable(t_Handle h_Fm, bool enable); + +/**************************************************************************//** + @Function FM_ConfigTnumAgingPeriod + + @Description Define Tnum aging period. + Calling this routine changes the Tnum aging of dequeue TNUM's + in the QMI in the internal driver data base from its default + [0]. + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] tnumAgingPeriod Tnum Aging Period in microseconds. + Note that period is recalculated in units of + 64 FM clocks. Driver will pick the closest + possible period. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigTnumAgingPeriod(t_Handle h_Fm, uint16_t tnumAgingPeriod); + +/**************************************************************************//* + @Function FM_ConfigDmaEmergencySmoother + + @Description Define DMA emergency smoother. + Calling this routine changes the definition of the minimum + amount of DATA beats transferred on the AXI READ and WRITE + ports before lowering the emergency level. + By default smoother is disabled. + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] emergencyCnt emergency switching counter. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigDmaEmergencySmoother(t_Handle h_Fm, uint32_t emergencyCnt); + +/**************************************************************************//* + @Function FM_ConfigThresholds + + @Description Calling this routine changes the internal driver data base + from its default FM threshold configuration: + dispLimit: [0] + prsDispTh: [16] + plcrDispTh: [16] + kgDispTh: [16] + bmiDispTh: [16] + qmiEnqDispTh: [16] + qmiDeqDispTh: [16] + fmCtl1DispTh: [16] + fmCtl2DispTh: [16] + + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] p_FmThresholds A structure of threshold parameters. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigThresholds(t_Handle h_Fm, t_FmThresholds *p_FmThresholds); + +/**************************************************************************//* + @Function FM_ConfigDmaSosEmergencyThreshold + + @Description Calling this routine changes the internal driver data base + from its default dma SOS emergency configuration [0] + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] dmaSosEmergency The selected new value. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigDmaSosEmergencyThreshold(t_Handle h_Fm, uint32_t dmaSosEmergency); + +/**************************************************************************//* + @Function FM_ConfigDmaWriteBufThresholds + + @Description Calling this routine changes the internal driver data base + from its default configuration of DMA write buffer threshold + assertEmergency: [DMA_THRESH_MAX_BUF] + clearEmergency: [DMA_THRESH_MAX_BUF] + This routine is only avaiable on old FM revisions (FMan v2). + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] p_FmDmaThresholds A structure of thresholds to define emergency behavior - + When 'assertEmergency' value is reached, emergency is asserted, + then it is held until 'clearEmergency' value is reached. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigDmaWriteBufThresholds(t_Handle h_Fm, t_FmDmaThresholds *p_FmDmaThresholds); + + /**************************************************************************//* + @Function FM_ConfigDmaCommQThresholds + + @Description Calling this routine changes the internal driver data base + from its default configuration of DMA command queue threshold + assertEmergency: [DMA_THRESH_MAX_COMMQ] + clearEmergency: [DMA_THRESH_MAX_COMMQ] + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] p_FmDmaThresholds A structure of thresholds to define emergency behavior - + When 'assertEmergency' value is reached, emergency is asserted, + then it is held until 'clearEmergency' value is reached.. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigDmaCommQThresholds(t_Handle h_Fm, t_FmDmaThresholds *p_FmDmaThresholds); + +/**************************************************************************//* + @Function FM_ConfigDmaReadBufThresholds + + @Description Calling this routine changes the internal driver data base + from its default configuration of DMA read buffer threshold + assertEmergency: [DMA_THRESH_MAX_BUF] + clearEmergency: [DMA_THRESH_MAX_BUF] + This routine is only avaiable on old FM revisions (FMan v2). + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] p_FmDmaThresholds A structure of thresholds to define emergency behavior - + When 'assertEmergency' value is reached, emergency is asserted, + then it is held until 'clearEmergency' value is reached.. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigDmaReadBufThresholds(t_Handle h_Fm, t_FmDmaThresholds *p_FmDmaThresholds); + +/**************************************************************************//* + @Function FM_ConfigDmaWatchdog + + @Description Calling this routine changes the internal driver data base + from its default watchdog configuration, which is disabled + [0]. + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] watchDogValue The selected new value - in microseconds. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ConfigDmaWatchdog(t_Handle h_Fm, uint32_t watchDogValue); + +/** @} */ /* end of FM_advanced_init_grp group */ +/** @} */ /* end of FM_init_grp group */ + + +/**************************************************************************//** + @Group FM_runtime_control_grp FM Runtime Control Unit + + @Description FM Runtime control unit API functions, definitions and enums. + The FM driver provides a set of control routines. + These routines may only be called after the module was fully + initialized (both configuration and initialization routines were + called). They are typically used to get information from hardware + (status, counters/statistics, revision etc.), to modify a current + state or to force/enable a required action. Run-time control may + be called whenever necessary and as many times as needed. + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Collection General FM defines. +*//***************************************************************************/ +#define FM_MAX_NUM_OF_VALID_PORTS (FM_MAX_NUM_OF_OH_PORTS + \ + FM_MAX_NUM_OF_1G_RX_PORTS + \ + FM_MAX_NUM_OF_10G_RX_PORTS + \ + FM_MAX_NUM_OF_1G_TX_PORTS + \ + FM_MAX_NUM_OF_10G_TX_PORTS) /**< Number of available FM ports */ +/* @} */ + +/**************************************************************************//* + @Description A Structure for Port bandwidth requirement. Port is identified + by type and relative id. +*//***************************************************************************/ +typedef struct t_FmPortBandwidth { + e_FmPortType type; /**< FM port type */ + uint8_t relativePortId; /**< Type relative port id */ + uint8_t bandwidth; /**< bandwidth - (in term of percents) */ +} t_FmPortBandwidth; + +/**************************************************************************//* + @Description A Structure containing an array of Port bandwidth requirements. + The user should state the ports requiring bandwidth in terms of + percentage - i.e. all port's bandwidths in the array must add + up to 100. +*//***************************************************************************/ +typedef struct t_FmPortsBandwidthParams { + uint8_t numOfPorts; /**< The number of relevant ports, which is the + number of valid entries in the array below */ + t_FmPortBandwidth portsBandwidths[FM_MAX_NUM_OF_VALID_PORTS]; + /**< for each port, it's bandwidth (all port's + bandwidths must add up to 100.*/ +} t_FmPortsBandwidthParams; + +/**************************************************************************//** + @Description DMA Emergency control on MURAM +*//***************************************************************************/ +typedef enum e_FmDmaMuramPort { + e_FM_DMA_MURAM_PORT_WRITE, /**< MURAM write port */ + e_FM_DMA_MURAM_PORT_READ /**< MURAM read port */ +} e_FmDmaMuramPort; + +/**************************************************************************//** + @Description Enum for defining FM counters +*//***************************************************************************/ +typedef enum e_FmCounters { + e_FM_COUNTERS_ENQ_TOTAL_FRAME = 0, /**< QMI total enqueued frames counter */ + e_FM_COUNTERS_DEQ_TOTAL_FRAME, /**< QMI total dequeued frames counter */ + e_FM_COUNTERS_DEQ_0, /**< QMI 0 frames from QMan counter */ + e_FM_COUNTERS_DEQ_1, /**< QMI 1 frames from QMan counter */ + e_FM_COUNTERS_DEQ_2, /**< QMI 2 frames from QMan counter */ + e_FM_COUNTERS_DEQ_3, /**< QMI 3 frames from QMan counter */ + e_FM_COUNTERS_DEQ_FROM_DEFAULT, /**< QMI dequeue from default queue counter */ + e_FM_COUNTERS_DEQ_FROM_CONTEXT, /**< QMI dequeue from FQ context counter */ + e_FM_COUNTERS_DEQ_FROM_FD, /**< QMI dequeue from FD command field counter */ + e_FM_COUNTERS_DEQ_CONFIRM /**< QMI dequeue confirm counter */ +} e_FmCounters; + +/**************************************************************************//** + @Description A Structure for returning FM revision information +*//***************************************************************************/ +typedef struct t_FmRevisionInfo { + uint8_t majorRev; /**< Major revision */ + uint8_t minorRev; /**< Minor revision */ +} t_FmRevisionInfo; + +/**************************************************************************//** + @Description A Structure for returning FM ctrl code revision information +*//***************************************************************************/ +typedef struct t_FmCtrlCodeRevisionInfo { + uint16_t packageRev; /**< Package revision */ + uint8_t majorRev; /**< Major revision */ + uint8_t minorRev; /**< Minor revision */ +} t_FmCtrlCodeRevisionInfo; + +/**************************************************************************//** + @Description A Structure for defining DMA status +*//***************************************************************************/ +typedef struct t_FmDmaStatus { + bool cmqNotEmpty; /**< Command queue is not empty */ + bool busError; /**< Bus error occurred */ + bool readBufEccError; /**< Double ECC error on buffer Read (Valid for FM rev < 6)*/ + bool writeBufEccSysError; /**< Double ECC error on buffer write from system side (Valid for FM rev < 6)*/ + bool writeBufEccFmError; /**< Double ECC error on buffer write from FM side (Valid for FM rev < 6) */ + bool singlePortEccError; /**< Single Port ECC error from FM side (Valid for FM rev >= 6)*/ +} t_FmDmaStatus; + +/**************************************************************************//** + @Description A Structure for obtaining FM controller monitor values +*//***************************************************************************/ +typedef struct t_FmCtrlMon { + uint8_t percentCnt[2]; /**< Percentage value */ +} t_FmCtrlMon; + + +#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0)) +/**************************************************************************//** + @Function FM_DumpRegs + + @Description Dumps all FM registers + + @Param[in] h_Fm A handle to an FM Module. + + @Return E_OK on success; + + @Cautions Allowed only following FM_Init(). +*//***************************************************************************/ +t_Error FM_DumpRegs(t_Handle h_Fm); +#endif /* (defined(DEBUG_ERRORS) && ... */ + +/**************************************************************************//** + @Function FM_SetException + + @Description Calling this routine enables/disables the specified exception. + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] exception The exception to be selected. + @Param[in] enable TRUE to enable interrupt, FALSE to mask it. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_SetException(t_Handle h_Fm, e_FmExceptions exception, bool enable); + +/**************************************************************************//** + @Function FM_EnableRamsEcc + + @Description Enables ECC mechanism for all the different FM RAM's; E.g. IRAM, + MURAM, Parser, Keygen, Policer, etc. + Note: + If FM_ConfigExternalEccRamsEnable was called to enable external + setting of ECC, this routine effects IRAM ECC only. + This routine is also called by the driver if an ECC exception is + enabled. + + @Param[in] h_Fm A handle to an FM Module. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_EnableRamsEcc(t_Handle h_Fm); + +/**************************************************************************//** + @Function FM_DisableRamsEcc + + @Description Disables ECC mechanism for all the different FM RAM's; E.g. IRAM, + MURAM, Parser, Keygen, Policer, etc. + Note: + If FM_ConfigExternalEccRamsEnable was called to enable external + setting of ECC, this routine effects IRAM ECC only. + In opposed to FM_EnableRamsEcc, this routine must be called + explicitly to disable all Rams ECC. + + @Param[in] h_Fm A handle to an FM Module. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Config() and before FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_DisableRamsEcc(t_Handle h_Fm); + +/**************************************************************************//** + @Function FM_GetRevision + + @Description Returns the FM revision + + @Param[in] h_Fm A handle to an FM Module. + @Param[out] p_FmRevisionInfo A structure of revision information parameters. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Init(). +*//***************************************************************************/ +t_Error FM_GetRevision(t_Handle h_Fm, t_FmRevisionInfo *p_FmRevisionInfo); + +/**************************************************************************//** + @Function FM_GetFmanCtrlCodeRevision + + @Description Returns the Fman controller code revision + + @Param[in] h_Fm A handle to an FM Module. + @Param[out] p_RevisionInfo A structure of revision information parameters. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Init(). +*//***************************************************************************/ +t_Error FM_GetFmanCtrlCodeRevision(t_Handle h_Fm, t_FmCtrlCodeRevisionInfo *p_RevisionInfo); + +/**************************************************************************//** + @Function FM_GetCounter + + @Description Reads one of the FM counters. + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] counter The requested counter. + + @Return Counter's current value. + + @Cautions Allowed only following FM_Init(). + Note that it is user's responsibility to call this routine only + for enabled counters, and there will be no indication if a + disabled counter is accessed. +*//***************************************************************************/ +uint32_t FM_GetCounter(t_Handle h_Fm, e_FmCounters counter); + +/**************************************************************************//** + @Function FM_ModifyCounter + + @Description Sets a value to an enabled counter. Use "0" to reset the counter. + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] counter The requested counter. + @Param[in] val The requested value to be written into the counter. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ModifyCounter(t_Handle h_Fm, e_FmCounters counter, uint32_t val); + +/**************************************************************************//** + @Function FM_Resume + + @Description Release FM after halt FM command or after unrecoverable ECC error. + + @Param[in] h_Fm A handle to an FM Module. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +void FM_Resume(t_Handle h_Fm); + +/**************************************************************************//** + @Function FM_SetDmaEmergency + + @Description Manual emergency set + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] muramPort MURAM direction select. + @Param[in] enable TRUE to manually enable emergency, FALSE to disable. + + @Return None. + + @Cautions Allowed only following FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +void FM_SetDmaEmergency(t_Handle h_Fm, e_FmDmaMuramPort muramPort, bool enable); + +/**************************************************************************//** + @Function FM_SetDmaExtBusPri + + @Description Set the DMA external bus priority + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] pri External bus priority select + + @Return None. + + @Cautions Allowed only following FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +void FM_SetDmaExtBusPri(t_Handle h_Fm, e_FmDmaExtBusPri pri); + +/**************************************************************************//** + @Function FM_GetDmaStatus + + @Description Reads the DMA current status + + @Param[in] h_Fm A handle to an FM Module. + @Param[out] p_FmDmaStatus A structure of DMA status parameters. + + @Cautions Allowed only following FM_Init(). +*//***************************************************************************/ +void FM_GetDmaStatus(t_Handle h_Fm, t_FmDmaStatus *p_FmDmaStatus); + +/**************************************************************************//** + @Function FM_ErrorIsr + + @Description FM interrupt-service-routine for errors. + + @Param[in] h_Fm A handle to an FM Module. + + @Return E_OK on success; E_EMPTY if no errors found in register, other + error code otherwise. + + @Cautions Allowed only following FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ErrorIsr(t_Handle h_Fm); + +/**************************************************************************//** + @Function FM_EventIsr + + @Description FM interrupt-service-routine for normal events. + + @Param[in] h_Fm A handle to an FM Module. + + @Cautions Allowed only following FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +void FM_EventIsr(t_Handle h_Fm); + +/**************************************************************************//** + @Function FM_GetSpecialOperationCoding + + @Description Return a specific coding according to the input mask. + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] spOper special operation mask. + @Param[out] p_SpOperCoding special operation code. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Init(). +*//***************************************************************************/ +t_Error FM_GetSpecialOperationCoding(t_Handle h_Fm, + fmSpecialOperations_t spOper, + uint8_t *p_SpOperCoding); + +/**************************************************************************//** + @Function FM_CtrlMonStart + + @Description Start monitoring utilization of all available FM controllers. + + In order to obtain FM controllers utilization the following sequence + should be used: + -# FM_CtrlMonStart() + -# FM_CtrlMonStop() + -# FM_CtrlMonGetCounters() - issued for each FM controller + + @Param[in] h_Fm A handle to an FM Module. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID). +*//***************************************************************************/ +t_Error FM_CtrlMonStart(t_Handle h_Fm); + +/**************************************************************************//** + @Function FM_CtrlMonStop + + @Description Stop monitoring utilization of all available FM controllers. + + In order to obtain FM controllers utilization the following sequence + should be used: + -# FM_CtrlMonStart() + -# FM_CtrlMonStop() + -# FM_CtrlMonGetCounters() - issued for each FM controller + + @Param[in] h_Fm A handle to an FM Module. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID). +*//***************************************************************************/ +t_Error FM_CtrlMonStop(t_Handle h_Fm); + +/**************************************************************************//** + @Function FM_CtrlMonGetCounters + + @Description Obtain FM controller utilization parameters. + + In order to obtain FM controllers utilization the following sequence + should be used: + -# FM_CtrlMonStart() + -# FM_CtrlMonStop() + -# FM_CtrlMonGetCounters() - issued for each FM controller + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] fmCtrlIndex FM Controller index for that utilization results + are requested. + @Param[in] p_Mon Pointer to utilization results structure. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID). +*//***************************************************************************/ +t_Error FM_CtrlMonGetCounters(t_Handle h_Fm, uint8_t fmCtrlIndex, t_FmCtrlMon *p_Mon); + + +/**************************************************************************//* + @Function FM_ForceIntr + + @Description Causes an interrupt event on the requested source. + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] exception An exception to be forced. + + @Return E_OK on success; Error code if the exception is not enabled, + or is not able to create interrupt. + + @Cautions Allowed only following FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_ForceIntr (t_Handle h_Fm, e_FmExceptions exception); + +/**************************************************************************//* + @Function FM_SetPortsBandwidth + + @Description Sets relative weights between ports when accessing common resources. + + @Param[in] h_Fm A handle to an FM Module. + @Param[in] p_PortsBandwidth A structure of ports bandwidths in percentage, i.e. + total must equal 100. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_Init(). + This routine should NOT be called from guest-partition + (i.e. guestId != NCSW_MASTER_ID) +*//***************************************************************************/ +t_Error FM_SetPortsBandwidth(t_Handle h_Fm, t_FmPortsBandwidthParams *p_PortsBandwidth); + +/** @} */ /* end of FM_runtime_control_grp group */ +/** @} */ /* end of FM_lib_grp group */ +/** @} */ /* end of FM_grp group */ + + +#ifdef NCSW_BACKWARD_COMPATIBLE_API +typedef t_FmFirmwareParams t_FmPcdFirmwareParams; +typedef t_FmBufferPrefixContent t_FmPortBufferPrefixContent; +typedef t_FmExtPoolParams t_FmPortExtPoolParams; +typedef t_FmExtPools t_FmPortExtPools; +typedef t_FmBackupBmPools t_FmPortBackupBmPools; +typedef t_FmBufPoolDepletion t_FmPortBufPoolDepletion; +typedef e_FmDmaSwapOption e_FmPortDmaSwapOption; +typedef e_FmDmaCacheOption e_FmPortDmaCacheOption; + +#define FM_CONTEXTA_GET_OVVERIDE FM_CONTEXTA_GET_OVERRIDE +#define FM_CONTEXTA_SET_OVVERIDE FM_CONTEXTA_SET_OVERRIDE + +#define e_FM_EX_BMI_PIPELINE_ECC e_FM_EX_BMI_STORAGE_PROFILE_ECC +#define e_FM_PORT_DMA_NO_SWP e_FM_DMA_NO_SWP +#define e_FM_PORT_DMA_SWP_PPC_LE e_FM_DMA_SWP_PPC_LE +#define e_FM_PORT_DMA_SWP_BE e_FM_DMA_SWP_BE +#define e_FM_PORT_DMA_NO_STASH e_FM_DMA_NO_STASH +#define e_FM_PORT_DMA_STASH e_FM_DMA_STASH +#endif /* NCSW_BACKWARD_COMPATIBLE_API */ + + +#endif /* __FM_EXT */ |