diff options
Diffstat (limited to 'drivers/net/phy/broadcom.c')
| -rw-r--r-- | drivers/net/phy/broadcom.c | 43 |
1 files changed, 43 insertions, 0 deletions
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index bddf4a4..7491433 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -25,6 +25,9 @@ #define BRCM_PHY_MODEL(phydev) \ ((phydev)->drv->phy_id & (phydev)->drv->phy_id_mask) +#define BRCM_PHY_REV(phydev) \ + ((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask)) + #define MII_BCM54XX_ECR 0x10 /* BCM54xx extended control register */ #define MII_BCM54XX_ECR_IM 0x1000 /* Interrupt mask */ @@ -95,11 +98,16 @@ #define BCM_LED_SRC_OFF 0xe /* Tied high */ #define BCM_LED_SRC_ON 0xf /* Tied low */ + /* * BCM5482: Shadow registers * Shadow values go into bits [14:10] of register 0x1c to select a shadow * register to access. */ +/* 00101: Spare Control Register 3 */ +#define BCM54XX_SHD_SCR3 0x05 +#define BCM54XX_SHD_SCR3_DEF_CLK125 0x0001 + #define BCM5482_SHD_LEDS1 0x0d /* 01101: LED Selector 1 */ /* LED3 / ~LINKSPD[2] selector */ #define BCM5482_SHD_LEDS1_LED3(src) ((src & 0xf) << 4) @@ -112,6 +120,7 @@ #define BCM5482_SHD_MODE 0x1f /* 11111: Mode Control Register */ #define BCM5482_SHD_MODE_1000BX 0x0001 /* Enable 1000BASE-X registers */ + /* * EXPANSION SHADOW ACCESS REGISTERS. (PHY REG 0x15, 0x16, and 0x17) */ @@ -309,6 +318,37 @@ error: return err ? err : err2; } +static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev) +{ + u32 val, orig; + + /* Abort if we are using an untested phy. */ + if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 || + BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M) + return; + + val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3); + if (val < 0) + return; + + orig = val; + + if (phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) { + if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 || + BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) && + BRCM_PHY_REV(phydev) >= 0x3) { + /* Here, bit 0 _disables_ CLK125 when set */ + val |= BCM54XX_SHD_SCR3_DEF_CLK125; + } else { + /* Here, bit 0 _enables_ CLK125 when set */ + val &= ~BCM54XX_SHD_SCR3_DEF_CLK125; + } + } + + if (orig != val) + bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val); +} + static int bcm54xx_config_init(struct phy_device *phydev) { int reg, err; @@ -336,6 +376,9 @@ static int bcm54xx_config_init(struct phy_device *phydev) (phydev->dev_flags & PHY_BRCM_CLEAR_RGMII_MODE)) bcm54xx_shadow_write(phydev, BCM54XX_SHD_RGMII_MODE, 0); + if (phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) + bcm54xx_adjust_rxrefclk(phydev); + bcm54xx_phydsp_config(phydev); return 0; |