diff options
Diffstat (limited to 'drivers/net/phy/phy.c')
-rw-r--r-- | drivers/net/phy/phy.c | 316 |
1 files changed, 298 insertions, 18 deletions
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 3cbda08..7ca2ff9 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -15,6 +15,9 @@ * option) any later version. * */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/string.h> #include <linux/errno.h> @@ -32,6 +35,7 @@ #include <linux/phy.h> #include <linux/timer.h> #include <linux/workqueue.h> +#include <linux/mdio.h> #include <linux/atomic.h> #include <asm/io.h> @@ -44,18 +48,16 @@ */ void phy_print_status(struct phy_device *phydev) { - pr_info("PHY: %s - Link is %s", dev_name(&phydev->dev), - phydev->link ? "Up" : "Down"); if (phydev->link) - printk(KERN_CONT " - %d/%s", phydev->speed, - DUPLEX_FULL == phydev->duplex ? - "Full" : "Half"); - - printk(KERN_CONT "\n"); + pr_info("%s - Link is Up - %d/%s\n", + dev_name(&phydev->dev), + phydev->speed, + DUPLEX_FULL == phydev->duplex ? "Full" : "Half"); + else + pr_info("%s - Link is Down\n", dev_name(&phydev->dev)); } EXPORT_SYMBOL(phy_print_status); - /** * phy_clear_interrupt - Ack the phy device's interrupt * @phydev: the phy_device struct @@ -482,9 +484,8 @@ static void phy_force_reduction(struct phy_device *phydev) phydev->speed = settings[idx].speed; phydev->duplex = settings[idx].duplex; - pr_info("Trying %d/%s\n", phydev->speed, - DUPLEX_FULL == phydev->duplex ? - "FULL" : "HALF"); + pr_info("Trying %d/%s\n", + phydev->speed, DUPLEX_FULL == phydev->duplex ? "FULL" : "HALF"); } @@ -598,9 +599,8 @@ int phy_start_interrupts(struct phy_device *phydev) IRQF_SHARED, "phy_interrupt", phydev) < 0) { - printk(KERN_WARNING "%s: Can't get IRQ %d (PHY)\n", - phydev->bus->name, - phydev->irq); + pr_warn("%s: Can't get IRQ %d (PHY)\n", + phydev->bus->name, phydev->irq); phydev->irq = PHY_POLL; return 0; } @@ -838,10 +838,10 @@ void phy_state_machine(struct work_struct *work) phydev->autoneg = AUTONEG_DISABLE; - pr_info("Trying %d/%s\n", phydev->speed, - DUPLEX_FULL == - phydev->duplex ? - "FULL" : "HALF"); + pr_info("Trying %d/%s\n", + phydev->speed, + DUPLEX_FULL == phydev->duplex ? + "FULL" : "HALF"); } break; case PHY_NOLINK: @@ -968,3 +968,283 @@ void phy_state_machine(struct work_struct *work) schedule_delayed_work(&phydev->state_queue, PHY_STATE_TIME * HZ); } + +static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad, + int addr) +{ + /* Write the desired MMD Devad */ + bus->write(bus, addr, MII_MMD_CTRL, devad); + + /* Write the desired MMD register address */ + bus->write(bus, addr, MII_MMD_DATA, prtad); + + /* Select the Function : DATA with no post increment */ + bus->write(bus, addr, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR)); +} + +/** + * phy_read_mmd_indirect - reads data from the MMD registers + * @bus: the target MII bus + * @prtad: MMD Address + * @devad: MMD DEVAD + * @addr: PHY address on the MII bus + * + * Description: it reads data from the MMD registers (clause 22 to access to + * clause 45) of the specified phy address. + * To read these register we have: + * 1) Write reg 13 // DEVAD + * 2) Write reg 14 // MMD Address + * 3) Write reg 13 // MMD Data Command for MMD DEVAD + * 3) Read reg 14 // Read MMD data + */ +static int phy_read_mmd_indirect(struct mii_bus *bus, int prtad, int devad, + int addr) +{ + u32 ret; + + mmd_phy_indirect(bus, prtad, devad, addr); + + /* Read the content of the MMD's selected register */ + ret = bus->read(bus, addr, MII_MMD_DATA); + + return ret; +} + +/** + * phy_write_mmd_indirect - writes data to the MMD registers + * @bus: the target MII bus + * @prtad: MMD Address + * @devad: MMD DEVAD + * @addr: PHY address on the MII bus + * @data: data to write in the MMD register + * + * Description: Write data from the MMD registers of the specified + * phy address. + * To write these register we have: + * 1) Write reg 13 // DEVAD + * 2) Write reg 14 // MMD Address + * 3) Write reg 13 // MMD Data Command for MMD DEVAD + * 3) Write reg 14 // Write MMD data + */ +static void phy_write_mmd_indirect(struct mii_bus *bus, int prtad, int devad, + int addr, u32 data) +{ + mmd_phy_indirect(bus, prtad, devad, addr); + + /* Write the data into MMD's selected register */ + bus->write(bus, addr, MII_MMD_DATA, data); +} + +static u32 phy_eee_to_adv(u16 eee_adv) +{ + u32 adv = 0; + + if (eee_adv & MDIO_EEE_100TX) + adv |= ADVERTISED_100baseT_Full; + if (eee_adv & MDIO_EEE_1000T) + adv |= ADVERTISED_1000baseT_Full; + if (eee_adv & MDIO_EEE_10GT) + adv |= ADVERTISED_10000baseT_Full; + if (eee_adv & MDIO_EEE_1000KX) + adv |= ADVERTISED_1000baseKX_Full; + if (eee_adv & MDIO_EEE_10GKX4) + adv |= ADVERTISED_10000baseKX4_Full; + if (eee_adv & MDIO_EEE_10GKR) + adv |= ADVERTISED_10000baseKR_Full; + + return adv; +} + +static u32 phy_eee_to_supported(u16 eee_caported) +{ + u32 supported = 0; + + if (eee_caported & MDIO_EEE_100TX) + supported |= SUPPORTED_100baseT_Full; + if (eee_caported & MDIO_EEE_1000T) + supported |= SUPPORTED_1000baseT_Full; + if (eee_caported & MDIO_EEE_10GT) + supported |= SUPPORTED_10000baseT_Full; + if (eee_caported & MDIO_EEE_1000KX) + supported |= SUPPORTED_1000baseKX_Full; + if (eee_caported & MDIO_EEE_10GKX4) + supported |= SUPPORTED_10000baseKX4_Full; + if (eee_caported & MDIO_EEE_10GKR) + supported |= SUPPORTED_10000baseKR_Full; + + return supported; +} + +static u16 phy_adv_to_eee(u32 adv) +{ + u16 reg = 0; + + if (adv & ADVERTISED_100baseT_Full) + reg |= MDIO_EEE_100TX; + if (adv & ADVERTISED_1000baseT_Full) + reg |= MDIO_EEE_1000T; + if (adv & ADVERTISED_10000baseT_Full) + reg |= MDIO_EEE_10GT; + if (adv & ADVERTISED_1000baseKX_Full) + reg |= MDIO_EEE_1000KX; + if (adv & ADVERTISED_10000baseKX4_Full) + reg |= MDIO_EEE_10GKX4; + if (adv & ADVERTISED_10000baseKR_Full) + reg |= MDIO_EEE_10GKR; + + return reg; +} + +/** + * phy_init_eee - init and check the EEE feature + * @phydev: target phy_device struct + * @clk_stop_enable: PHY may stop the clock during LPI + * + * Description: it checks if the Energy-Efficient Ethernet (EEE) + * is supported by looking at the MMD registers 3.20 and 7.60/61 + * and it programs the MMD register 3.0 setting the "Clock stop enable" + * bit if required. + */ +int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) +{ + int ret = -EPROTONOSUPPORT; + + /* According to 802.3az,the EEE is supported only in full duplex-mode. + * Also EEE feature is active when core is operating with MII, GMII + * or RGMII. + */ + if ((phydev->duplex == DUPLEX_FULL) && + ((phydev->interface == PHY_INTERFACE_MODE_MII) || + (phydev->interface == PHY_INTERFACE_MODE_GMII) || + (phydev->interface == PHY_INTERFACE_MODE_RGMII))) { + int eee_lp, eee_cap, eee_adv; + u32 lp, cap, adv; + int idx, status; + + /* Read phy status to properly get the right settings */ + status = phy_read_status(phydev); + if (status) + return status; + + /* First check if the EEE ability is supported */ + eee_cap = phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_ABLE, + MDIO_MMD_PCS, phydev->addr); + if (eee_cap < 0) + return eee_cap; + + cap = phy_eee_to_supported(eee_cap); + if (!cap) + goto eee_exit; + + /* Check which link settings negotiated and verify it in + * the EEE advertising registers. + */ + eee_lp = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_LPABLE, + MDIO_MMD_AN, phydev->addr); + if (eee_lp < 0) + return eee_lp; + + eee_adv = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV, + MDIO_MMD_AN, phydev->addr); + if (eee_adv < 0) + return eee_adv; + + adv = phy_eee_to_adv(eee_adv); + lp = phy_eee_to_adv(eee_lp); + idx = phy_find_setting(phydev->speed, phydev->duplex); + if ((lp & adv & settings[idx].setting)) + goto eee_exit; + + if (clk_stop_enable) { + /* Configure the PHY to stop receiving xMII + * clock while it is signaling LPI. + */ + int val = phy_read_mmd_indirect(phydev->bus, MDIO_CTRL1, + MDIO_MMD_PCS, + phydev->addr); + if (val < 0) + return val; + + val |= MDIO_PCS_CTRL1_CLKSTOP_EN; + phy_write_mmd_indirect(phydev->bus, MDIO_CTRL1, + MDIO_MMD_PCS, phydev->addr, val); + } + + ret = 0; /* EEE supported */ + } + +eee_exit: + return ret; +} +EXPORT_SYMBOL(phy_init_eee); + +/** + * phy_get_eee_err - report the EEE wake error count + * @phydev: target phy_device struct + * + * Description: it is to report the number of time where the PHY + * failed to complete its normal wake sequence. + */ +int phy_get_eee_err(struct phy_device *phydev) +{ + return phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_WK_ERR, + MDIO_MMD_PCS, phydev->addr); + +} +EXPORT_SYMBOL(phy_get_eee_err); + +/** + * phy_ethtool_get_eee - get EEE supported and status + * @phydev: target phy_device struct + * @data: ethtool_eee data + * + * Description: it reportes the Supported/Advertisement/LP Advertisement + * capabilities. + */ +int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data) +{ + int val; + + /* Get Supported EEE */ + val = phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_ABLE, + MDIO_MMD_PCS, phydev->addr); + if (val < 0) + return val; + data->supported = phy_eee_to_supported(val); + + /* Get advertisement EEE */ + val = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV, + MDIO_MMD_AN, phydev->addr); + if (val < 0) + return val; + data->advertised = phy_eee_to_adv(val); + + /* Get LP advertisement EEE */ + val = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_LPABLE, + MDIO_MMD_AN, phydev->addr); + if (val < 0) + return val; + data->lp_advertised = phy_eee_to_adv(val); + + return 0; +} +EXPORT_SYMBOL(phy_ethtool_get_eee); + +/** + * phy_ethtool_set_eee - set EEE supported and status + * @phydev: target phy_device struct + * @data: ethtool_eee data + * + * Description: it is to program the Advertisement EEE register. + */ +int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data) +{ + int val; + + val = phy_adv_to_eee(data->advertised); + phy_write_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV, MDIO_MMD_AN, + phydev->addr, val); + + return 0; +} +EXPORT_SYMBOL(phy_ethtool_set_eee); |