summaryrefslogtreecommitdiff
path: root/drivers/net/sfc/efx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sfc/efx.c')
-rw-r--r--drivers/net/sfc/efx.c2208
1 files changed, 2208 insertions, 0 deletions
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
new file mode 100644
index 0000000..59edcf7
--- /dev/null
+++ b/drivers/net/sfc/efx.c
@@ -0,0 +1,2208 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2005-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/notifier.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/in.h>
+#include <linux/crc32.h>
+#include <linux/ethtool.h>
+#include "net_driver.h"
+#include "gmii.h"
+#include "ethtool.h"
+#include "tx.h"
+#include "rx.h"
+#include "efx.h"
+#include "mdio_10g.h"
+#include "falcon.h"
+#include "workarounds.h"
+#include "mac.h"
+
+#define EFX_MAX_MTU (9 * 1024)
+
+/* RX slow fill workqueue. If memory allocation fails in the fast path,
+ * a work item is pushed onto this work queue to retry the allocation later,
+ * to avoid the NIC being starved of RX buffers. Since this is a per cpu
+ * workqueue, there is nothing to be gained in making it per NIC
+ */
+static struct workqueue_struct *refill_workqueue;
+
+/**************************************************************************
+ *
+ * Configurable values
+ *
+ *************************************************************************/
+
+/*
+ * Enable large receive offload (LRO) aka soft segment reassembly (SSR)
+ *
+ * This sets the default for new devices. It can be controlled later
+ * using ethtool.
+ */
+static int lro = 1;
+module_param(lro, int, 0644);
+MODULE_PARM_DESC(lro, "Large receive offload acceleration");
+
+/*
+ * Use separate channels for TX and RX events
+ *
+ * Set this to 1 to use separate channels for TX and RX. It allows us to
+ * apply a higher level of interrupt moderation to TX events.
+ *
+ * This is forced to 0 for MSI interrupt mode as the interrupt vector
+ * is not written
+ */
+static unsigned int separate_tx_and_rx_channels = 1;
+
+/* This is the weight assigned to each of the (per-channel) virtual
+ * NAPI devices.
+ */
+static int napi_weight = 64;
+
+/* This is the time (in jiffies) between invocations of the hardware
+ * monitor, which checks for known hardware bugs and resets the
+ * hardware and driver as necessary.
+ */
+unsigned int efx_monitor_interval = 1 * HZ;
+
+/* This controls whether or not the hardware monitor will trigger a
+ * reset when it detects an error condition.
+ */
+static unsigned int monitor_reset = 1;
+
+/* This controls whether or not the driver will initialise devices
+ * with invalid MAC addresses stored in the EEPROM or flash. If true,
+ * such devices will be initialised with a random locally-generated
+ * MAC address. This allows for loading the sfc_mtd driver to
+ * reprogram the flash, even if the flash contents (including the MAC
+ * address) have previously been erased.
+ */
+static unsigned int allow_bad_hwaddr;
+
+/* Initial interrupt moderation settings. They can be modified after
+ * module load with ethtool.
+ *
+ * The default for RX should strike a balance between increasing the
+ * round-trip latency and reducing overhead.
+ */
+static unsigned int rx_irq_mod_usec = 60;
+
+/* Initial interrupt moderation settings. They can be modified after
+ * module load with ethtool.
+ *
+ * This default is chosen to ensure that a 10G link does not go idle
+ * while a TX queue is stopped after it has become full. A queue is
+ * restarted when it drops below half full. The time this takes (assuming
+ * worst case 3 descriptors per packet and 1024 descriptors) is
+ * 512 / 3 * 1.2 = 205 usec.
+ */
+static unsigned int tx_irq_mod_usec = 150;
+
+/* This is the first interrupt mode to try out of:
+ * 0 => MSI-X
+ * 1 => MSI
+ * 2 => legacy
+ */
+static unsigned int interrupt_mode;
+
+/* This is the requested number of CPUs to use for Receive-Side Scaling (RSS),
+ * i.e. the number of CPUs among which we may distribute simultaneous
+ * interrupt handling.
+ *
+ * Cards without MSI-X will only target one CPU via legacy or MSI interrupt.
+ * The default (0) means to assign an interrupt to each package (level II cache)
+ */
+static unsigned int rss_cpus;
+module_param(rss_cpus, uint, 0444);
+MODULE_PARM_DESC(rss_cpus, "Number of CPUs to use for Receive-Side Scaling");
+
+/**************************************************************************
+ *
+ * Utility functions and prototypes
+ *
+ *************************************************************************/
+static void efx_remove_channel(struct efx_channel *channel);
+static void efx_remove_port(struct efx_nic *efx);
+static void efx_fini_napi(struct efx_nic *efx);
+static void efx_fini_channels(struct efx_nic *efx);
+
+#define EFX_ASSERT_RESET_SERIALISED(efx) \
+ do { \
+ if ((efx->state == STATE_RUNNING) || \
+ (efx->state == STATE_RESETTING)) \
+ ASSERT_RTNL(); \
+ } while (0)
+
+/**************************************************************************
+ *
+ * Event queue processing
+ *
+ *************************************************************************/
+
+/* Process channel's event queue
+ *
+ * This function is responsible for processing the event queue of a
+ * single channel. The caller must guarantee that this function will
+ * never be concurrently called more than once on the same channel,
+ * though different channels may be being processed concurrently.
+ */
+static inline int efx_process_channel(struct efx_channel *channel, int rx_quota)
+{
+ int rxdmaqs;
+ struct efx_rx_queue *rx_queue;
+
+ if (unlikely(channel->efx->reset_pending != RESET_TYPE_NONE ||
+ !channel->enabled))
+ return rx_quota;
+
+ rxdmaqs = falcon_process_eventq(channel, &rx_quota);
+
+ /* Deliver last RX packet. */
+ if (channel->rx_pkt) {
+ __efx_rx_packet(channel, channel->rx_pkt,
+ channel->rx_pkt_csummed);
+ channel->rx_pkt = NULL;
+ }
+
+ efx_flush_lro(channel);
+ efx_rx_strategy(channel);
+
+ /* Refill descriptor rings as necessary */
+ rx_queue = &channel->efx->rx_queue[0];
+ while (rxdmaqs) {
+ if (rxdmaqs & 0x01)
+ efx_fast_push_rx_descriptors(rx_queue);
+ rx_queue++;
+ rxdmaqs >>= 1;
+ }
+
+ return rx_quota;
+}
+
+/* Mark channel as finished processing
+ *
+ * Note that since we will not receive further interrupts for this
+ * channel before we finish processing and call the eventq_read_ack()
+ * method, there is no need to use the interrupt hold-off timers.
+ */
+static inline void efx_channel_processed(struct efx_channel *channel)
+{
+ /* Write to EVQ_RPTR_REG. If a new event arrived in a race
+ * with finishing processing, a new interrupt will be raised.
+ */
+ channel->work_pending = 0;
+ smp_wmb(); /* Ensure channel updated before any new interrupt. */
+ falcon_eventq_read_ack(channel);
+}
+
+/* NAPI poll handler
+ *
+ * NAPI guarantees serialisation of polls of the same device, which
+ * provides the guarantee required by efx_process_channel().
+ */
+static int efx_poll(struct napi_struct *napi, int budget)
+{
+ struct efx_channel *channel =
+ container_of(napi, struct efx_channel, napi_str);
+ struct net_device *napi_dev = channel->napi_dev;
+ int unused;
+ int rx_packets;
+
+ EFX_TRACE(channel->efx, "channel %d NAPI poll executing on CPU %d\n",
+ channel->channel, raw_smp_processor_id());
+
+ unused = efx_process_channel(channel, budget);
+ rx_packets = (budget - unused);
+
+ if (rx_packets < budget) {
+ /* There is no race here; although napi_disable() will
+ * only wait for netif_rx_complete(), this isn't a problem
+ * since efx_channel_processed() will have no effect if
+ * interrupts have already been disabled.
+ */
+ netif_rx_complete(napi_dev, napi);
+ efx_channel_processed(channel);
+ }
+
+ return rx_packets;
+}
+
+/* Process the eventq of the specified channel immediately on this CPU
+ *
+ * Disable hardware generated interrupts, wait for any existing
+ * processing to finish, then directly poll (and ack ) the eventq.
+ * Finally reenable NAPI and interrupts.
+ *
+ * Since we are touching interrupts the caller should hold the suspend lock
+ */
+void efx_process_channel_now(struct efx_channel *channel)
+{
+ struct efx_nic *efx = channel->efx;
+
+ BUG_ON(!channel->used_flags);
+ BUG_ON(!channel->enabled);
+
+ /* Disable interrupts and wait for ISRs to complete */
+ falcon_disable_interrupts(efx);
+ if (efx->legacy_irq)
+ synchronize_irq(efx->legacy_irq);
+ if (channel->has_interrupt && channel->irq)
+ synchronize_irq(channel->irq);
+
+ /* Wait for any NAPI processing to complete */
+ napi_disable(&channel->napi_str);
+
+ /* Poll the channel */
+ (void) efx_process_channel(channel, efx->type->evq_size);
+
+ /* Ack the eventq. This may cause an interrupt to be generated
+ * when they are reenabled */
+ efx_channel_processed(channel);
+
+ napi_enable(&channel->napi_str);
+ falcon_enable_interrupts(efx);
+}
+
+/* Create event queue
+ * Event queue memory allocations are done only once. If the channel
+ * is reset, the memory buffer will be reused; this guards against
+ * errors during channel reset and also simplifies interrupt handling.
+ */
+static int efx_probe_eventq(struct efx_channel *channel)
+{
+ EFX_LOG(channel->efx, "chan %d create event queue\n", channel->channel);
+
+ return falcon_probe_eventq(channel);
+}
+
+/* Prepare channel's event queue */
+static int efx_init_eventq(struct efx_channel *channel)
+{
+ EFX_LOG(channel->efx, "chan %d init event queue\n", channel->channel);
+
+ channel->eventq_read_ptr = 0;
+
+ return falcon_init_eventq(channel);
+}
+
+static void efx_fini_eventq(struct efx_channel *channel)
+{
+ EFX_LOG(channel->efx, "chan %d fini event queue\n", channel->channel);
+
+ falcon_fini_eventq(channel);
+}
+
+static void efx_remove_eventq(struct efx_channel *channel)
+{
+ EFX_LOG(channel->efx, "chan %d remove event queue\n", channel->channel);
+
+ falcon_remove_eventq(channel);
+}
+
+/**************************************************************************
+ *
+ * Channel handling
+ *
+ *************************************************************************/
+
+/* Setup per-NIC RX buffer parameters.
+ * Calculate the rx buffer allocation parameters required to support
+ * the current MTU, including padding for header alignment and overruns.
+ */
+static void efx_calc_rx_buffer_params(struct efx_nic *efx)
+{
+ unsigned int order, len;
+
+ len = (max(EFX_PAGE_IP_ALIGN, NET_IP_ALIGN) +
+ EFX_MAX_FRAME_LEN(efx->net_dev->mtu) +
+ efx->type->rx_buffer_padding);
+
+ /* Calculate page-order */
+ for (order = 0; ((1u << order) * PAGE_SIZE) < len; ++order)
+ ;
+
+ efx->rx_buffer_len = len;
+ efx->rx_buffer_order = order;
+}
+
+static int efx_probe_channel(struct efx_channel *channel)
+{
+ struct efx_tx_queue *tx_queue;
+ struct efx_rx_queue *rx_queue;
+ int rc;
+
+ EFX_LOG(channel->efx, "creating channel %d\n", channel->channel);
+
+ rc = efx_probe_eventq(channel);
+ if (rc)
+ goto fail1;
+
+ efx_for_each_channel_tx_queue(tx_queue, channel) {
+ rc = efx_probe_tx_queue(tx_queue);
+ if (rc)
+ goto fail2;
+ }
+
+ efx_for_each_channel_rx_queue(rx_queue, channel) {
+ rc = efx_probe_rx_queue(rx_queue);
+ if (rc)
+ goto fail3;
+ }
+
+ channel->n_rx_frm_trunc = 0;
+
+ return 0;
+
+ fail3:
+ efx_for_each_channel_rx_queue(rx_queue, channel)
+ efx_remove_rx_queue(rx_queue);
+ fail2:
+ efx_for_each_channel_tx_queue(tx_queue, channel)
+ efx_remove_tx_queue(tx_queue);
+ fail1:
+ return rc;
+}
+
+
+/* Channels are shutdown and reinitialised whilst the NIC is running
+ * to propagate configuration changes (mtu, checksum offload), or
+ * to clear hardware error conditions
+ */
+static int efx_init_channels(struct efx_nic *efx)
+{
+ struct efx_tx_queue *tx_queue;
+ struct efx_rx_queue *rx_queue;
+ struct efx_channel *channel;
+ int rc = 0;
+
+ efx_calc_rx_buffer_params(efx);
+
+ /* Initialise the channels */
+ efx_for_each_channel(channel, efx) {
+ EFX_LOG(channel->efx, "init chan %d\n", channel->channel);
+
+ rc = efx_init_eventq(channel);
+ if (rc)
+ goto err;
+
+ efx_for_each_channel_tx_queue(tx_queue, channel) {
+ rc = efx_init_tx_queue(tx_queue);
+ if (rc)
+ goto err;
+ }
+
+ /* The rx buffer allocation strategy is MTU dependent */
+ efx_rx_strategy(channel);
+
+ efx_for_each_channel_rx_queue(rx_queue, channel) {
+ rc = efx_init_rx_queue(rx_queue);
+ if (rc)
+ goto err;
+ }
+
+ WARN_ON(channel->rx_pkt != NULL);
+ efx_rx_strategy(channel);
+ }
+
+ return 0;
+
+ err:
+ EFX_ERR(efx, "failed to initialise channel %d\n",
+ channel ? channel->channel : -1);
+ efx_fini_channels(efx);
+ return rc;
+}
+
+/* This enables event queue processing and packet transmission.
+ *
+ * Note that this function is not allowed to fail, since that would
+ * introduce too much complexity into the suspend/resume path.
+ */
+static void efx_start_channel(struct efx_channel *channel)
+{
+ struct efx_rx_queue *rx_queue;
+
+ EFX_LOG(channel->efx, "starting chan %d\n", channel->channel);
+
+ if (!(channel->efx->net_dev->flags & IFF_UP))
+ netif_napi_add(channel->napi_dev, &channel->napi_str,
+ efx_poll, napi_weight);
+
+ channel->work_pending = 0;
+ channel->enabled = 1;
+ smp_wmb(); /* ensure channel updated before first interrupt */
+
+ napi_enable(&channel->napi_str);
+
+ /* Load up RX descriptors */
+ efx_for_each_channel_rx_queue(rx_queue, channel)
+ efx_fast_push_rx_descriptors(rx_queue);
+}
+
+/* This disables event queue processing and packet transmission.
+ * This function does not guarantee that all queue processing
+ * (e.g. RX refill) is complete.
+ */
+static void efx_stop_channel(struct efx_channel *channel)
+{
+ struct efx_rx_queue *rx_queue;
+
+ if (!channel->enabled)
+ return;
+
+ EFX_LOG(channel->efx, "stop chan %d\n", channel->channel);
+
+ channel->enabled = 0;
+ napi_disable(&channel->napi_str);
+
+ /* Ensure that any worker threads have exited or will be no-ops */
+ efx_for_each_channel_rx_queue(rx_queue, channel) {
+ spin_lock_bh(&rx_queue->add_lock);
+ spin_unlock_bh(&rx_queue->add_lock);
+ }
+}
+
+static void efx_fini_channels(struct efx_nic *efx)
+{
+ struct efx_channel *channel;
+ struct efx_tx_queue *tx_queue;
+ struct efx_rx_queue *rx_queue;
+
+ EFX_ASSERT_RESET_SERIALISED(efx);
+ BUG_ON(efx->port_enabled);
+
+ efx_for_each_channel(channel, efx) {
+ EFX_LOG(channel->efx, "shut down chan %d\n", channel->channel);
+
+ efx_for_each_channel_rx_queue(rx_queue, channel)
+ efx_fini_rx_queue(rx_queue);
+ efx_for_each_channel_tx_queue(tx_queue, channel)
+ efx_fini_tx_queue(tx_queue);
+ }
+
+ /* Do the event queues last so that we can handle flush events
+ * for all DMA queues. */
+ efx_for_each_channel(channel, efx) {
+ EFX_LOG(channel->efx, "shut down evq %d\n", channel->channel);
+
+ efx_fini_eventq(channel);
+ }
+}
+
+static void efx_remove_channel(struct efx_channel *channel)
+{
+ struct efx_tx_queue *tx_queue;
+ struct efx_rx_queue *rx_queue;
+
+ EFX_LOG(channel->efx, "destroy chan %d\n", channel->channel);
+
+ efx_for_each_channel_rx_queue(rx_queue, channel)
+ efx_remove_rx_queue(rx_queue);
+ efx_for_each_channel_tx_queue(tx_queue, channel)
+ efx_remove_tx_queue(tx_queue);
+ efx_remove_eventq(channel);
+
+ channel->used_flags = 0;
+}
+
+void efx_schedule_slow_fill(struct efx_rx_queue *rx_queue, int delay)
+{
+ queue_delayed_work(refill_workqueue, &rx_queue->work, delay);
+}
+
+/**************************************************************************
+ *
+ * Port handling
+ *
+ **************************************************************************/
+
+/* This ensures that the kernel is kept informed (via
+ * netif_carrier_on/off) of the link status, and also maintains the
+ * link status's stop on the port's TX queue.
+ */
+static void efx_link_status_changed(struct efx_nic *efx)
+{
+ int carrier_ok;
+
+ /* SFC Bug 5356: A net_dev notifier is registered, so we must ensure
+ * that no events are triggered between unregister_netdev() and the
+ * driver unloading. A more general condition is that NETDEV_CHANGE
+ * can only be generated between NETDEV_UP and NETDEV_DOWN */
+ if (!netif_running(efx->net_dev))
+ return;
+
+ carrier_ok = netif_carrier_ok(efx->net_dev) ? 1 : 0;
+ if (efx->link_up != carrier_ok) {
+ efx->n_link_state_changes++;
+
+ if (efx->link_up)
+ netif_carrier_on(efx->net_dev);
+ else
+ netif_carrier_off(efx->net_dev);
+ }
+
+ /* Status message for kernel log */
+ if (efx->link_up) {
+ struct mii_if_info *gmii = &efx->mii;
+ unsigned adv, lpa;
+ /* NONE here means direct XAUI from the controller, with no
+ * MDIO-attached device we can query. */
+ if (efx->phy_type != PHY_TYPE_NONE) {
+ adv = gmii_advertised(gmii);
+ lpa = gmii_lpa(gmii);
+ } else {
+ lpa = GM_LPA_10000 | LPA_DUPLEX;
+ adv = lpa;
+ }
+ EFX_INFO(efx, "link up at %dMbps %s-duplex "
+ "(adv %04x lpa %04x) (MTU %d)%s\n",
+ (efx->link_options & GM_LPA_10000 ? 10000 :
+ (efx->link_options & GM_LPA_1000 ? 1000 :
+ (efx->link_options & GM_LPA_100 ? 100 :
+ 10))),
+ (efx->link_options & GM_LPA_DUPLEX ?
+ "full" : "half"),
+ adv, lpa,
+ efx->net_dev->mtu,
+ (efx->promiscuous ? " [PROMISC]" : ""));
+ } else {
+ EFX_INFO(efx, "link down\n");
+ }
+
+}
+
+/* This call reinitialises the MAC to pick up new PHY settings. The
+ * caller must hold the mac_lock */
+static void __efx_reconfigure_port(struct efx_nic *efx)
+{
+ WARN_ON(!mutex_is_locked(&efx->mac_lock));
+
+ EFX_LOG(efx, "reconfiguring MAC from PHY settings on CPU %d\n",
+ raw_smp_processor_id());
+
+ falcon_reconfigure_xmac(efx);
+
+ /* Inform kernel of loss/gain of carrier */
+ efx_link_status_changed(efx);
+}
+
+/* Reinitialise the MAC to pick up new PHY settings, even if the port is
+ * disabled. */
+void efx_reconfigure_port(struct efx_nic *efx)
+{
+ EFX_ASSERT_RESET_SERIALISED(efx);
+
+ mutex_lock(&efx->mac_lock);
+ __efx_reconfigure_port(efx);
+ mutex_unlock(&efx->mac_lock);
+}
+
+/* Asynchronous efx_reconfigure_port work item. To speed up efx_flush_all()
+ * we don't efx_reconfigure_port() if the port is disabled. Care is taken
+ * in efx_stop_all() and efx_start_port() to prevent PHY events being lost */
+static void efx_reconfigure_work(struct work_struct *data)
+{
+ struct efx_nic *efx = container_of(data, struct efx_nic,
+ reconfigure_work);
+
+ mutex_lock(&efx->mac_lock);
+ if (efx->port_enabled)
+ __efx_reconfigure_port(efx);
+ mutex_unlock(&efx->mac_lock);
+}
+
+static int efx_probe_port(struct efx_nic *efx)
+{
+ int rc;
+
+ EFX_LOG(efx, "create port\n");
+
+ /* Connect up MAC/PHY operations table and read MAC address */
+ rc = falcon_probe_port(efx);
+ if (rc)
+ goto err;
+
+ /* Sanity check MAC address */
+ if (is_valid_ether_addr(efx->mac_address)) {
+ memcpy(efx->net_dev->dev_addr, efx->mac_address, ETH_ALEN);
+ } else {
+ DECLARE_MAC_BUF(mac);
+
+ EFX_ERR(efx, "invalid MAC address %s\n",
+ print_mac(mac, efx->mac_address));
+ if (!allow_bad_hwaddr) {
+ rc = -EINVAL;
+ goto err;
+ }
+ random_ether_addr(efx->net_dev->dev_addr);
+ EFX_INFO(efx, "using locally-generated MAC %s\n",
+ print_mac(mac, efx->net_dev->dev_addr));
+ }
+
+ return 0;
+
+ err:
+ efx_remove_port(efx);
+ return rc;
+}
+
+static int efx_init_port(struct efx_nic *efx)
+{
+ int rc;
+
+ EFX_LOG(efx, "init port\n");
+
+ /* Initialise the MAC and PHY */
+ rc = falcon_init_xmac(efx);
+ if (rc)
+ return rc;
+
+ efx->port_initialized = 1;
+
+ /* Reconfigure port to program MAC registers */
+ falcon_reconfigure_xmac(efx);
+
+ return 0;
+}
+
+/* Allow efx_reconfigure_port() to be scheduled, and close the window
+ * between efx_stop_port and efx_flush_all whereby a previously scheduled
+ * efx_reconfigure_port() may have been cancelled */
+static void efx_start_port(struct efx_nic *efx)
+{
+ EFX_LOG(efx, "start port\n");
+ BUG_ON(efx->port_enabled);
+
+ mutex_lock(&efx->mac_lock);
+ efx->port_enabled = 1;
+ __efx_reconfigure_port(efx);
+ mutex_unlock(&efx->mac_lock);
+}
+
+/* Prevent efx_reconfigure_work and efx_monitor() from executing, and
+ * efx_set_multicast_list() from scheduling efx_reconfigure_work.
+ * efx_reconfigure_work can still be scheduled via NAPI processing
+ * until efx_flush_all() is called */
+static void efx_stop_port(struct efx_nic *efx)
+{
+ EFX_LOG(efx, "stop port\n");
+
+ mutex_lock(&efx->mac_lock);
+ efx->port_enabled = 0;
+ mutex_unlock(&efx->mac_lock);
+
+ /* Serialise against efx_set_multicast_list() */
+ if (NET_DEV_REGISTERED(efx)) {
+ netif_tx_lock_bh(efx->net_dev);
+ netif_tx_unlock_bh(efx->net_dev);
+ }
+}
+
+static void efx_fini_port(struct efx_nic *efx)
+{
+ EFX_LOG(efx, "shut down port\n");
+
+ if (!efx->port_initialized)
+ return;
+
+ falcon_fini_xmac(efx);
+ efx->port_initialized = 0;
+
+ efx->link_up = 0;
+ efx_link_status_changed(efx);
+}
+
+static void efx_remove_port(struct efx_nic *efx)
+{
+ EFX_LOG(efx, "destroying port\n");
+
+ falcon_remove_port(efx);
+}
+
+/**************************************************************************
+ *
+ * NIC handling
+ *
+ **************************************************************************/
+
+/* This configures the PCI device to enable I/O and DMA. */
+static int efx_init_io(struct efx_nic *efx)
+{
+ struct pci_dev *pci_dev = efx->pci_dev;
+ dma_addr_t dma_mask = efx->type->max_dma_mask;
+ int rc;
+
+ EFX_LOG(efx, "initialising I/O\n");
+
+ rc = pci_enable_device(pci_dev);
+ if (rc) {
+ EFX_ERR(efx, "failed to enable PCI device\n");
+ goto fail1;
+ }
+
+ pci_set_master(pci_dev);
+
+ /* Set the PCI DMA mask. Try all possibilities from our
+ * genuine mask down to 32 bits, because some architectures
+ * (e.g. x86_64 with iommu_sac_force set) will allow 40 bit
+ * masks event though they reject 46 bit masks.
+ */
+ while (dma_mask > 0x7fffffffUL) {
+ if (pci_dma_supported(pci_dev, dma_mask) &&
+ ((rc = pci_set_dma_mask(pci_dev, dma_mask)) == 0))
+ break;
+ dma_mask >>= 1;
+ }
+ if (rc) {
+ EFX_ERR(efx, "could not find a suitable DMA mask\n");
+ goto fail2;
+ }
+ EFX_LOG(efx, "using DMA mask %llx\n", (unsigned long long) dma_mask);
+ rc = pci_set_consistent_dma_mask(pci_dev, dma_mask);
+ if (rc) {
+ /* pci_set_consistent_dma_mask() is not *allowed* to
+ * fail with a mask that pci_set_dma_mask() accepted,
+ * but just in case...
+ */
+ EFX_ERR(efx, "failed to set consistent DMA mask\n");
+ goto fail2;
+ }
+
+ efx->membase_phys = pci_resource_start(efx->pci_dev,
+ efx->type->mem_bar);
+ rc = pci_request_region(pci_dev, efx->type->mem_bar, "sfc");
+ if (rc) {
+ EFX_ERR(efx, "request for memory BAR failed\n");
+ rc = -EIO;
+ goto fail3;
+ }
+ efx->membase = ioremap_nocache(efx->membase_phys,
+ efx->type->mem_map_size);
+ if (!efx->membase) {
+ EFX_ERR(efx, "could not map memory BAR %d at %lx+%x\n",
+ efx->type->mem_bar, efx->membase_phys,
+ efx->type->mem_map_size);
+ rc = -ENOMEM;
+ goto fail4;
+ }
+ EFX_LOG(efx, "memory BAR %u at %lx+%x (virtual %p)\n",
+ efx->type->mem_bar, efx->membase_phys, efx->type->mem_map_size,
+ efx->membase);
+
+ return 0;
+
+ fail4:
+ release_mem_region(efx->membase_phys, efx->type->mem_map_size);
+ fail3:
+ efx->membase_phys = 0UL;
+ fail2:
+ pci_disable_device(efx->pci_dev);
+ fail1:
+ return rc;
+}
+
+static void efx_fini_io(struct efx_nic *efx)
+{
+ EFX_LOG(efx, "shutting down I/O\n");
+
+ if (efx->membase) {
+ iounmap(efx->membase);
+ efx->membase = NULL;
+ }
+
+ if (efx->membase_phys) {
+ pci_release_region(efx->pci_dev, efx->type->mem_bar);
+ efx->membase_phys = 0UL;
+ }
+
+ pci_disable_device(efx->pci_dev);
+}
+
+/* Probe the number and type of interrupts we are able to obtain. */
+static void efx_probe_interrupts(struct efx_nic *efx)
+{
+ int max_channel = efx->type->phys_addr_channels - 1;
+ struct msix_entry xentries[EFX_MAX_CHANNELS];
+ int rc, i;
+
+ if (efx->interrupt_mode == EFX_INT_MODE_MSIX) {
+ BUG_ON(!pci_find_capability(efx->pci_dev, PCI_CAP_ID_MSIX));
+
+ efx->rss_queues = rss_cpus ? rss_cpus : num_online_cpus();
+ efx->rss_queues = min(efx->rss_queues, max_channel + 1);
+ efx->rss_queues = min(efx->rss_queues, EFX_MAX_CHANNELS);
+
+ /* Request maximum number of MSI interrupts, and fill out
+ * the channel interrupt information the allowed allocation */
+ for (i = 0; i < efx->rss_queues; i++)
+ xentries[i].entry = i;
+ rc = pci_enable_msix(efx->pci_dev, xentries, efx->rss_queues);
+ if (rc > 0) {
+ EFX_BUG_ON_PARANOID(rc >= efx->rss_queues);
+ efx->rss_queues = rc;
+ rc = pci_enable_msix(efx->pci_dev, xentries,
+ efx->rss_queues);
+ }
+
+ if (rc == 0) {
+ for (i = 0; i < efx->rss_queues; i++) {
+ efx->channel[i].has_interrupt = 1;
+ efx->channel[i].irq = xentries[i].vector;
+ }
+ } else {
+ /* Fall back to single channel MSI */
+ efx->interrupt_mode = EFX_INT_MODE_MSI;
+ EFX_ERR(efx, "could not enable MSI-X\n");
+ }
+ }
+
+ /* Try single interrupt MSI */
+ if (efx->interrupt_mode == EFX_INT_MODE_MSI) {
+ efx->rss_queues = 1;
+ rc = pci_enable_msi(efx->pci_dev);
+ if (rc == 0) {
+ efx->channel[0].irq = efx->pci_dev->irq;
+ efx->channel[0].has_interrupt = 1;
+ } else {
+ EFX_ERR(efx, "could not enable MSI\n");
+ efx->interrupt_mode = EFX_INT_MODE_LEGACY;
+ }
+ }
+
+ /* Assume legacy interrupts */
+ if (efx->interrupt_mode == EFX_INT_MODE_LEGACY) {
+ efx->rss_queues = 1;
+ /* Every channel is interruptible */
+ for (i = 0; i < EFX_MAX_CHANNELS; i++)
+ efx->channel[i].has_interrupt = 1;
+ efx->legacy_irq = efx->pci_dev->irq;
+ }
+}
+
+static void efx_remove_interrupts(struct efx_nic *efx)
+{
+ struct efx_channel *channel;
+
+ /* Remove MSI/MSI-X interrupts */
+ efx_for_each_channel_with_interrupt(channel, efx)
+ channel->irq = 0;
+ pci_disable_msi(efx->pci_dev);
+ pci_disable_msix(efx->pci_dev);
+
+ /* Remove legacy interrupt */
+ efx->legacy_irq = 0;
+}
+
+/* Select number of used resources
+ * Should be called after probe_interrupts()
+ */
+static void efx_select_used(struct efx_nic *efx)
+{
+ struct efx_tx_queue *tx_queue;
+ struct efx_rx_queue *rx_queue;
+ int i;
+
+ /* TX queues. One per port per channel with TX capability
+ * (more than one per port won't work on Linux, due to out
+ * of order issues... but will be fine on Solaris)
+ */
+ tx_queue = &efx->tx_queue[0];
+
+ /* Perform this for each channel with TX capabilities.
+ * At the moment, we only support a single TX queue
+ */
+ tx_queue->used = 1;
+ if ((!EFX_INT_MODE_USE_MSI(efx)) && separate_tx_and_rx_channels)
+ tx_queue->channel = &efx->channel[1];
+ else
+ tx_queue->channel = &efx->channel[0];
+ tx_queue->channel->used_flags |= EFX_USED_BY_TX;
+ tx_queue++;
+
+ /* RX queues. Each has a dedicated channel. */
+ for (i = 0; i < EFX_MAX_RX_QUEUES; i++) {
+ rx_queue = &efx->rx_queue[i];
+
+ if (i < efx->rss_queues) {
+ rx_queue->used = 1;
+ /* If we allow multiple RX queues per channel
+ * we need to decide that here
+ */
+ rx_queue->channel = &efx->channel[rx_queue->queue];
+ rx_queue->channel->used_flags |= EFX_USED_BY_RX;
+ rx_queue++;
+ }
+ }
+}
+
+static int efx_probe_nic(struct efx_nic *efx)
+{
+ int rc;
+
+ EFX_LOG(efx, "creating NIC\n");
+
+ /* Carry out hardware-type specific initialisation */
+ rc = falcon_probe_nic(efx);
+ if (rc)
+ return rc;
+
+ /* Determine the number of channels and RX queues by trying to hook
+ * in MSI-X interrupts. */
+ efx_probe_interrupts(efx);
+
+ /* Determine number of RX queues and TX queues */
+ efx_select_used(efx);
+
+ /* Initialise the interrupt moderation settings */
+ efx_init_irq_moderation(efx, tx_irq_mod_usec, rx_irq_mod_usec);
+
+ return 0;
+}
+
+static void efx_remove_nic(struct efx_nic *efx)
+{
+ EFX_LOG(efx, "destroying NIC\n");
+
+ efx_remove_interrupts(efx);
+ falcon_remove_nic(efx);
+}
+
+/**************************************************************************
+ *
+ * NIC startup/shutdown
+ *
+ *************************************************************************/
+
+static int efx_probe_all(struct efx_nic *efx)
+{
+ struct efx_channel *channel;
+ int rc;
+
+ /* Create NIC */
+ rc = efx_probe_nic(efx);
+ if (rc) {
+ EFX_ERR(efx, "failed to create NIC\n");
+ goto fail1;
+ }
+
+ /* Create port */
+ rc = efx_probe_port(efx);
+ if (rc) {
+ EFX_ERR(efx, "failed to create port\n");
+ goto fail2;
+ }
+
+ /* Create channels */
+ efx_for_each_channel(channel, efx) {
+ rc = efx_probe_channel(channel);
+ if (rc) {
+ EFX_ERR(efx, "failed to create channel %d\n",
+ channel->channel);
+ goto fail3;
+ }
+ }
+
+ return 0;
+
+ fail3:
+ efx_for_each_channel(channel, efx)
+ efx_remove_channel(channel);
+ efx_remove_port(efx);
+ fail2:
+ efx_remove_nic(efx);
+ fail1:
+ return rc;
+}
+
+/* Called after previous invocation(s) of efx_stop_all, restarts the
+ * port, kernel transmit queue, NAPI processing and hardware interrupts,
+ * and ensures that the port is scheduled to be reconfigured.
+ * This function is safe to call multiple times when the NIC is in any
+ * state. */
+static void efx_start_all(struct efx_nic *efx)
+{
+ struct efx_channel *channel;
+
+ EFX_ASSERT_RESET_SERIALISED(efx);
+
+ /* Check that it is appropriate to restart the interface. All
+ * of these flags are safe to read under just the rtnl lock */
+ if (efx->port_enabled)
+ return;
+ if ((efx->state != STATE_RUNNING) && (efx->state != STATE_INIT))
+ return;
+ if (NET_DEV_REGISTERED(efx) && !netif_running(efx->net_dev))
+ return;
+
+ /* Mark the port as enabled so port reconfigurations can start, then
+ * restart the transmit interface early so the watchdog timer stops */
+ efx_start_port(efx);
+ efx_wake_queue(efx);
+
+ efx_for_each_channel(channel, efx)
+ efx_start_channel(channel);
+
+ falcon_enable_interrupts(efx);
+
+ /* Start hardware monitor if we're in RUNNING */
+ if (efx->state == STATE_RUNNING)
+ queue_delayed_work(efx->workqueue, &efx->monitor_work,
+ efx_monitor_interval);
+}
+
+/* Flush all delayed work. Should only be called when no more delayed work
+ * will be scheduled. This doesn't flush pending online resets (efx_reset),
+ * since we're holding the rtnl_lock at this point. */
+static void efx_flush_all(struct efx_nic *efx)
+{
+ struct efx_rx_queue *rx_queue;
+
+ /* Make sure the hardware monitor is stopped */
+ cancel_delayed_work_sync(&efx->monitor_work);
+
+ /* Ensure that all RX slow refills are complete. */
+ efx_for_each_rx_queue(rx_queue, efx) {
+ cancel_delayed_work_sync(&rx_queue->work);
+ }
+
+ /* Stop scheduled port reconfigurations */
+ cancel_work_sync(&efx->reconfigure_work);
+
+}
+
+/* Quiesce hardware and software without bringing the link down.
+ * Safe to call multiple times, when the nic and interface is in any
+ * state. The caller is guaranteed to subsequently be in a position
+ * to modify any hardware and software state they see fit without
+ * taking locks. */
+static void efx_stop_all(struct efx_nic *efx)
+{
+ struct efx_channel *channel;
+
+ EFX_ASSERT_RESET_SERIALISED(efx);
+
+ /* port_enabled can be read safely under the rtnl lock */
+ if (!efx->port_enabled)
+ return;
+
+ /* Disable interrupts and wait for ISR to complete */
+ falcon_disable_interrupts(efx);
+ if (efx->legacy_irq)
+ synchronize_irq(efx->legacy_irq);
+ efx_for_each_channel_with_interrupt(channel, efx)
+ if (channel->irq)
+ synchronize_irq(channel->irq);
+
+ /* Stop all NAPI processing and synchronous rx refills */
+ efx_for_each_channel(channel, efx)
+ efx_stop_channel(channel);
+
+ /* Stop all asynchronous port reconfigurations. Since all
+ * event processing has already been stopped, there is no
+ * window to loose phy events */
+ efx_stop_port(efx);
+
+ /* Flush reconfigure_work, refill_workqueue, monitor_work */
+ efx_flush_all(efx);
+
+ /* Isolate the MAC from the TX and RX engines, so that queue
+ * flushes will complete in a timely fashion. */
+ falcon_deconfigure_mac_wrapper(efx);
+ falcon_drain_tx_fifo(efx);
+
+ /* Stop the kernel transmit interface late, so the watchdog
+ * timer isn't ticking over the flush */
+ efx_stop_queue(efx);
+ if (NET_DEV_REGISTERED(efx)) {
+ netif_tx_lock_bh(efx->net_dev);
+ netif_tx_unlock_bh(efx->net_dev);
+ }
+}
+
+static void efx_remove_all(struct efx_nic *efx)
+{
+ struct efx_channel *channel;
+
+ efx_for_each_channel(channel, efx)
+ efx_remove_channel(channel);
+ efx_remove_port(efx);
+ efx_remove_nic(efx);
+}
+
+/* A convinience function to safely flush all the queues */
+int efx_flush_queues(struct efx_nic *efx)
+{
+ int rc;
+
+ EFX_ASSERT_RESET_SERIALISED(efx);
+
+ efx_stop_all(efx);
+
+ efx_fini_channels(efx);
+ rc = efx_init_channels(efx);
+ if (rc) {
+ efx_schedule_reset(efx, RESET_TYPE_DISABLE);
+ return rc;
+ }
+
+ efx_start_all(efx);
+
+ return 0;
+}
+
+/**************************************************************************
+ *
+ * Interrupt moderation
+ *
+ **************************************************************************/
+
+/* Set interrupt moderation parameters */
+void efx_init_irq_moderation(struct efx_nic *efx, int tx_usecs, int rx_usecs)
+{
+ struct efx_tx_queue *tx_queue;
+ struct efx_rx_queue *rx_queue;
+
+ EFX_ASSERT_RESET_SERIALISED(efx);
+
+ efx_for_each_tx_queue(tx_queue, efx)
+ tx_queue->channel->irq_moderation = tx_usecs;
+
+ efx_for_each_rx_queue(rx_queue, efx)
+ rx_queue->channel->irq_moderation = rx_usecs;
+}
+
+/**************************************************************************
+ *
+ * Hardware monitor
+ *
+ **************************************************************************/
+
+/* Run periodically off the general workqueue. Serialised against
+ * efx_reconfigure_port via the mac_lock */
+static void efx_monitor(struct work_struct *data)
+{
+ struct efx_nic *efx = container_of(data, struct efx_nic,
+ monitor_work.work);
+ int rc = 0;
+
+ EFX_TRACE(efx, "hardware monitor executing on CPU %d\n",
+ raw_smp_processor_id());
+
+
+ /* If the mac_lock is already held then it is likely a port
+ * reconfiguration is already in place, which will likely do
+ * most of the work of check_hw() anyway. */
+ if (!mutex_trylock(&efx->mac_lock)) {
+ queue_delayed_work(efx->workqueue, &efx->monitor_work,
+ efx_monitor_interval);
+ return;
+ }
+
+ if (efx->port_enabled)
+ rc = falcon_check_xmac(efx);
+ mutex_unlock(&efx->mac_lock);
+
+ if (rc) {
+ if (monitor_reset) {
+ EFX_ERR(efx, "hardware monitor detected a fault: "
+ "triggering reset\n");
+ efx_schedule_reset(efx, RESET_TYPE_MONITOR);
+ } else {
+ EFX_ERR(efx, "hardware monitor detected a fault, "
+ "skipping reset\n");
+ }
+ }
+
+ queue_delayed_work(efx->workqueue, &efx->monitor_work,
+ efx_monitor_interval);
+}
+
+/**************************************************************************
+ *
+ * ioctls
+ *
+ *************************************************************************/
+
+/* Net device ioctl
+ * Context: process, rtnl_lock() held.
+ */
+static int efx_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd)
+{
+ struct efx_nic *efx = net_dev->priv;
+
+ EFX_ASSERT_RESET_SERIALISED(efx);
+
+ return generic_mii_ioctl(&efx->mii, if_mii(ifr), cmd, NULL);
+}
+
+/**************************************************************************
+ *
+ * NAPI interface
+ *
+ **************************************************************************/
+
+static int efx_init_napi(struct efx_nic *efx)
+{
+ struct efx_channel *channel;
+ int rc;
+
+ efx_for_each_channel(channel, efx) {
+ channel->napi_dev = efx->net_dev;
+ rc = efx_lro_init(&channel->lro_mgr, efx);
+ if (rc)
+ goto err;
+ }
+ return 0;
+ err:
+ efx_fini_napi(efx);
+ return rc;
+}
+
+static void efx_fini_napi(struct efx_nic *efx)
+{
+ struct efx_channel *channel;
+
+ efx_for_each_channel(channel, efx) {
+ efx_lro_fini(&channel->lro_mgr);
+ channel->napi_dev = NULL;
+ }
+}
+
+/**************************************************************************
+ *
+ * Kernel netpoll interface
+ *
+ *************************************************************************/
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+
+/* Although in the common case interrupts will be disabled, this is not
+ * guaranteed. However, all our work happens inside the NAPI callback,
+ * so no locking is required.
+ */
+static void efx_netpoll(struct net_device *net_dev)
+{
+ struct efx_nic *efx = net_dev->priv;
+ struct efx_channel *channel;
+
+ efx_for_each_channel_with_interrupt(channel, efx)
+ efx_schedule_channel(channel);
+}
+
+#endif
+
+/**************************************************************************
+ *
+ * Kernel net device interface
+ *
+ *************************************************************************/
+
+/* Context: process, rtnl_lock() held. */
+static int efx_net_open(struct net_device *net_dev)
+{
+ struct efx_nic *efx = net_dev->priv;
+ EFX_ASSERT_RESET_SERIALISED(efx);
+
+ EFX_LOG(efx, "opening device %s on CPU %d\n", net_dev->name,
+ raw_smp_processor_id());
+
+ efx_start_all(efx);
+ return 0;
+}
+
+/* Context: process, rtnl_lock() held.
+ * Note that the kernel will ignore our return code; this method
+ * should really be a void.
+ */
+static int efx_net_stop(struct net_device *net_dev)
+{
+ struct efx_nic *efx = net_dev->priv;
+ int rc;
+
+ EFX_LOG(efx, "closing %s on CPU %d\n", net_dev->name,
+ raw_smp_processor_id());
+
+ /* Stop the device and flush all the channels */
+ efx_stop_all(efx);
+ efx_fini_channels(efx);
+ rc = efx_init_channels(efx);
+ if (rc)
+ efx_schedule_reset(efx, RESET_TYPE_DISABLE);
+
+ return 0;
+}
+
+/* Context: process, dev_base_lock held, non-blocking. */
+static struct net_device_stats *efx_net_stats(struct net_device *net_dev)
+{
+ struct efx_nic *efx = net_dev->priv;
+ struct efx_mac_stats *mac_stats = &efx->mac_stats;
+ struct net_device_stats *stats = &net_dev->stats;
+
+ if (!spin_trylock(&efx->stats_lock))
+ return stats;
+ if (efx->state == STATE_RUNNING) {
+ falcon_update_stats_xmac(efx);
+ falcon_update_nic_stats(efx);
+ }
+ spin_unlock(&efx->stats_lock);
+
+ stats->rx_packets = mac_stats->rx_packets;
+ stats->tx_packets = mac_stats->tx_packets;
+ stats->rx_bytes = mac_stats->rx_bytes;
+ stats->tx_bytes = mac_stats->tx_bytes;
+ stats->multicast = mac_stats->rx_multicast;
+ stats->collisions = mac_stats->tx_collision;
+ stats->rx_length_errors = (mac_stats->rx_gtjumbo +
+ mac_stats->rx_length_error);
+ stats->rx_over_errors = efx->n_rx_nodesc_drop_cnt;
+ stats->rx_crc_errors = mac_stats->rx_bad;
+ stats->rx_frame_errors = mac_stats->rx_align_error;
+ stats->rx_fifo_errors = mac_stats->rx_overflow;
+ stats->rx_missed_errors = mac_stats->rx_missed;
+ stats->tx_window_errors = mac_stats->tx_late_collision;
+
+ stats->rx_errors = (stats->rx_length_errors +
+ stats->rx_over_errors +
+ stats->rx_crc_errors +
+ stats->rx_frame_errors +
+ stats->rx_fifo_errors +
+ stats->rx_missed_errors +
+ mac_stats->rx_symbol_error);
+ stats->tx_errors = (stats->tx_window_errors +
+ mac_stats->tx_bad);
+
+ return stats;
+}
+
+/* Context: netif_tx_lock held, BHs disabled. */
+static void efx_watchdog(struct net_device *net_dev)
+{
+ struct efx_nic *efx = net_dev->priv;
+
+ EFX_ERR(efx, "TX stuck with stop_count=%d port_enabled=%d: %s\n",
+ atomic_read(&efx->netif_stop_count), efx->port_enabled,
+ monitor_reset ? "resetting channels" : "skipping reset");
+
+ if (monitor_reset)
+ efx_schedule_reset(efx, RESET_TYPE_MONITOR);
+}
+
+
+/* Context: process, rtnl_lock() held. */
+static int efx_change_mtu(struct net_device *net_dev, int new_mtu)
+{
+ struct efx_nic *efx = net_dev->priv;
+ int rc = 0;
+
+ EFX_ASSERT_RESET_SERIALISED(efx);
+
+ if (new_mtu > EFX_MAX_MTU)
+ return -EINVAL;
+
+ efx_stop_all(efx);
+
+ EFX_LOG(efx, "changing MTU to %d\n", new_mtu);
+
+ efx_fini_channels(efx);
+ net_dev->mtu = new_mtu;
+ rc = efx_init_channels(efx);
+ if (rc)
+ goto fail;
+
+ efx_start_all(efx);
+ return rc;
+
+ fail:
+ efx_schedule_reset(efx, RESET_TYPE_DISABLE);
+ return rc;
+}
+
+static int efx_set_mac_address(struct net_device *net_dev, void *data)
+{
+ struct efx_nic *efx = net_dev->priv;
+ struct sockaddr *addr = data;
+ char *new_addr = addr->sa_data;
+
+ EFX_ASSERT_RESET_SERIALISED(efx);
+
+ if (!is_valid_ether_addr(new_addr)) {
+ DECLARE_MAC_BUF(mac);
+ EFX_ERR(efx, "invalid ethernet MAC address requested: %s\n",
+ print_mac(mac, new_addr));
+ return -EINVAL;
+ }
+
+ memcpy(net_dev->dev_addr, new_addr, net_dev->addr_len);
+
+ /* Reconfigure the MAC */
+ efx_reconfigure_port(efx);
+
+ return 0;
+}
+
+/* Context: netif_tx_lock held, BHs disabled. */
+static void efx_set_multicast_list(struct net_device *net_dev)
+{
+ struct efx_nic *efx = net_dev->priv;
+ struct dev_mc_list *mc_list = net_dev->mc_list;
+ union efx_multicast_hash *mc_hash = &efx->multicast_hash;
+ int promiscuous;
+ u32 crc;
+ int bit;
+ int i;
+
+ /* Set per-MAC promiscuity flag and reconfigure MAC if necessary */
+ promiscuous = (net_dev->flags & IFF_PROMISC) ? 1 : 0;
+ if (efx->promiscuous != promiscuous) {
+ efx->promiscuous = promiscuous;
+ /* Close the window between efx_stop_port() and efx_flush_all()
+ * by only queuing work when the port is enabled. */
+ if (efx->port_enabled)
+ queue_work(efx->workqueue, &efx->reconfigure_work);
+ }
+
+ /* Build multicast hash table */
+ if (promiscuous || (net_dev->flags & IFF_ALLMULTI)) {
+ memset(mc_hash, 0xff, sizeof(*mc_hash));
+ } else {
+ memset(mc_hash, 0x00, sizeof(*mc_hash));
+ for (i = 0; i < net_dev->mc_count; i++) {
+ crc = ether_crc_le(ETH_ALEN, mc_list->dmi_addr);
+ bit = crc & (EFX_MCAST_HASH_ENTRIES - 1);
+ set_bit_le(bit, mc_hash->byte);
+ mc_list = mc_list->next;
+ }
+ }
+
+ /* Create and activate new global multicast hash table */
+ falcon_set_multicast_hash(efx);
+}
+
+static int efx_netdev_event(struct notifier_block *this,
+ unsigned long event, void *ptr)
+{
+ struct net_device *net_dev = (struct net_device *)ptr;
+
+ if (net_dev->open == efx_net_open && event == NETDEV_CHANGENAME) {
+ struct efx_nic *efx = net_dev->priv;
+
+ strcpy(efx->name, net_dev->name);
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block efx_netdev_notifier = {
+ .notifier_call = efx_netdev_event,
+};
+
+static int efx_register_netdev(struct efx_nic *efx)
+{
+ struct net_device *net_dev = efx->net_dev;
+ int rc;
+
+ net_dev->watchdog_timeo = 5 * HZ;
+ net_dev->irq = efx->pci_dev->irq;
+ net_dev->open = efx_net_open;
+ net_dev->stop = efx_net_stop;
+ net_dev->get_stats = efx_net_stats;
+ net_dev->tx_timeout = &efx_watchdog;
+ net_dev->hard_start_xmit = efx_hard_start_xmit;
+ net_dev->do_ioctl = efx_ioctl;
+ net_dev->change_mtu = efx_change_mtu;
+ net_dev->set_mac_address = efx_set_mac_address;
+ net_dev->set_multicast_list = efx_set_multicast_list;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ net_dev->poll_controller = efx_netpoll;
+#endif
+ SET_NETDEV_DEV(net_dev, &efx->pci_dev->dev);
+ SET_ETHTOOL_OPS(net_dev, &efx_ethtool_ops);
+
+ /* Always start with carrier off; PHY events will detect the link */
+ netif_carrier_off(efx->net_dev);
+
+ /* Clear MAC statistics */
+ falcon_update_stats_xmac(efx);
+ memset(&efx->mac_stats, 0, sizeof(efx->mac_stats));
+
+ rc = register_netdev(net_dev);
+ if (rc) {
+ EFX_ERR(efx, "could not register net dev\n");
+ return rc;
+ }
+ strcpy(efx->name, net_dev->name);
+
+ return 0;
+}
+
+static void efx_unregister_netdev(struct efx_nic *efx)
+{
+ struct efx_tx_queue *tx_queue;
+
+ if (!efx->net_dev)
+ return;
+
+ BUG_ON(efx->net_dev->priv != efx);
+
+ /* Free up any skbs still remaining. This has to happen before
+ * we try to unregister the netdev as running their destructors
+ * may be needed to get the device ref. count to 0. */
+ efx_for_each_tx_queue(tx_queue, efx)
+ efx_release_tx_buffers(tx_queue);
+
+ if (NET_DEV_REGISTERED(efx)) {
+ strlcpy(efx->name, pci_name(efx->pci_dev), sizeof(efx->name));
+ unregister_netdev(efx->net_dev);
+ }
+}
+
+/**************************************************************************
+ *
+ * Device reset and suspend
+ *
+ **************************************************************************/
+
+/* The final hardware and software finalisation before reset. */
+static int efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+{
+ int rc;
+
+ EFX_ASSERT_RESET_SERIALISED(efx);
+
+ rc = falcon_xmac_get_settings(efx, ecmd);
+ if (rc) {
+ EFX_ERR(efx, "could not back up PHY settings\n");
+ goto fail;
+ }
+
+ efx_fini_channels(efx);
+ return 0;
+
+ fail:
+ return rc;
+}
+
+/* The first part of software initialisation after a hardware reset
+ * This function does not handle serialisation with the kernel, it
+ * assumes the caller has done this */
+static int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+{
+ int rc;
+
+ rc = efx_init_channels(efx);
+ if (rc)
+ goto fail1;
+
+ /* Restore MAC and PHY settings. */
+ rc = falcon_xmac_set_settings(efx, ecmd);
+ if (rc) {
+ EFX_ERR(efx, "could not restore PHY settings\n");
+ goto fail2;
+ }
+
+ return 0;
+
+ fail2:
+ efx_fini_channels(efx);
+ fail1:
+ return rc;
+}
+
+/* Reset the NIC as transparently as possible. Do not reset the PHY
+ * Note that the reset may fail, in which case the card will be left
+ * in a most-probably-unusable state.
+ *
+ * This function will sleep. You cannot reset from within an atomic
+ * state; use efx_schedule_reset() instead.
+ *
+ * Grabs the rtnl_lock.
+ */
+static int efx_reset(struct efx_nic *efx)
+{
+ struct ethtool_cmd ecmd;
+ enum reset_type method = efx->reset_pending;
+ int rc;
+
+ /* Serialise with kernel interfaces */
+ rtnl_lock();
+
+ /* If we're not RUNNING then don't reset. Leave the reset_pending
+ * flag set so that efx_pci_probe_main will be retried */
+ if (efx->state != STATE_RUNNING) {
+ EFX_INFO(efx, "scheduled reset quenched. NIC not RUNNING\n");
+ goto unlock_rtnl;
+ }
+
+ efx->state = STATE_RESETTING;
+ EFX_INFO(efx, "resetting (%d)\n", method);
+
+ /* The net_dev->get_stats handler is quite slow, and will fail
+ * if a fetch is pending over reset. Serialise against it. */
+ spin_lock(&efx->stats_lock);
+ spin_unlock(&efx->stats_lock);
+
+ efx_stop_all(efx);
+ mutex_lock(&efx->mac_lock);
+
+ rc = efx_reset_down(efx, &ecmd);
+ if (rc)
+ goto fail1;
+
+ rc = falcon_reset_hw(efx, method);
+ if (rc) {
+ EFX_ERR(efx, "failed to reset hardware\n");
+ goto fail2;
+ }
+
+ /* Allow resets to be rescheduled. */
+ efx->reset_pending = RESET_TYPE_NONE;
+
+ /* Reinitialise bus-mastering, which may have been turned off before
+ * the reset was scheduled. This is still appropriate, even in the
+ * RESET_TYPE_DISABLE since this driver generally assumes the hardware
+ * can respond to requests. */
+ pci_set_master(efx->pci_dev);
+
+ /* Reinitialise device. This is appropriate in the RESET_TYPE_DISABLE
+ * case so the driver can talk to external SRAM */
+ rc = falcon_init_nic(efx);
+ if (rc) {
+ EFX_ERR(efx, "failed to initialise NIC\n");
+ goto fail3;
+ }
+
+ /* Leave device stopped if necessary */
+ if (method == RESET_TYPE_DISABLE) {
+ /* Reinitialise the device anyway so the driver unload sequence
+ * can talk to the external SRAM */
+ (void) falcon_init_nic(efx);
+ rc = -EIO;
+ goto fail4;
+ }
+
+ rc = efx_reset_up(efx, &ecmd);
+ if (rc)
+ goto fail5;
+
+ mutex_unlock(&efx->mac_lock);
+ EFX_LOG(efx, "reset complete\n");
+
+ efx->state = STATE_RUNNING;
+ efx_start_all(efx);
+
+ unlock_rtnl:
+ rtnl_unlock();
+ return 0;
+
+ fail5:
+ fail4:
+ fail3:
+ fail2:
+ fail1:
+ EFX_ERR(efx, "has been disabled\n");
+ efx->state = STATE_DISABLED;
+
+ mutex_unlock(&efx->mac_lock);
+ rtnl_unlock();
+ efx_unregister_netdev(efx);
+ efx_fini_port(efx);
+ return rc;
+}
+
+/* The worker thread exists so that code that cannot sleep can
+ * schedule a reset for later.
+ */
+static void efx_reset_work(struct work_struct *data)
+{
+ struct efx_nic *nic = container_of(data, struct efx_nic, reset_work);
+
+ efx_reset(nic);
+}
+
+void efx_schedule_reset(struct efx_nic *efx, enum reset_type type)
+{
+ enum reset_type method;
+
+ if (efx->reset_pending != RESET_TYPE_NONE) {
+ EFX_INFO(efx, "quenching already scheduled reset\n");
+ return;
+ }
+
+ switch (type) {
+ case RESET_TYPE_INVISIBLE:
+ case RESET_TYPE_ALL:
+ case RESET_TYPE_WORLD:
+ case RESET_TYPE_DISABLE:
+ method = type;
+ break;
+ case RESET_TYPE_RX_RECOVERY:
+ case RESET_TYPE_RX_DESC_FETCH:
+ case RESET_TYPE_TX_DESC_FETCH:
+ case RESET_TYPE_TX_SKIP:
+ method = RESET_TYPE_INVISIBLE;
+ break;
+ default:
+ method = RESET_TYPE_ALL;
+ break;
+ }
+
+ if (method != type)
+ EFX_LOG(efx, "scheduling reset (%d:%d)\n", type, method);
+ else
+ EFX_LOG(efx, "scheduling reset (%d)\n", method);
+
+ efx->reset_pending = method;
+
+ queue_work(efx->workqueue, &efx->reset_work);
+}
+
+/**************************************************************************
+ *
+ * List of NICs we support
+ *
+ **************************************************************************/
+
+/* PCI device ID table */
+static struct pci_device_id efx_pci_table[] __devinitdata = {
+ {PCI_DEVICE(EFX_VENDID_SFC, FALCON_A_P_DEVID),
+ .driver_data = (unsigned long) &falcon_a_nic_type},
+ {PCI_DEVICE(EFX_VENDID_SFC, FALCON_B_P_DEVID),
+ .driver_data = (unsigned long) &falcon_b_nic_type},
+ {0} /* end of list */
+};
+
+/**************************************************************************
+ *
+ * Dummy PHY/MAC/Board operations
+ *
+ * Can be used where the MAC does not implement this operation
+ * Needed so all function pointers are valid and do not have to be tested
+ * before use
+ *
+ **************************************************************************/
+int efx_port_dummy_op_int(struct efx_nic *efx)
+{
+ return 0;
+}
+void efx_port_dummy_op_void(struct efx_nic *efx) {}
+void efx_port_dummy_op_blink(struct efx_nic *efx, int blink) {}
+
+static struct efx_phy_operations efx_dummy_phy_operations = {
+ .init = efx_port_dummy_op_int,
+ .reconfigure = efx_port_dummy_op_void,
+ .check_hw = efx_port_dummy_op_int,
+ .fini = efx_port_dummy_op_void,
+ .clear_interrupt = efx_port_dummy_op_void,
+ .reset_xaui = efx_port_dummy_op_void,
+};
+
+/* Dummy board operations */
+static int efx_nic_dummy_op_int(struct efx_nic *nic)
+{
+ return 0;
+}
+
+static struct efx_board efx_dummy_board_info = {
+ .init = efx_nic_dummy_op_int,
+ .init_leds = efx_port_dummy_op_int,
+ .set_fault_led = efx_port_dummy_op_blink,
+};
+
+/**************************************************************************
+ *
+ * Data housekeeping
+ *
+ **************************************************************************/
+
+/* This zeroes out and then fills in the invariants in a struct
+ * efx_nic (including all sub-structures).
+ */
+static int efx_init_struct(struct efx_nic *efx, struct efx_nic_type *type,
+ struct pci_dev *pci_dev, struct net_device *net_dev)
+{
+ struct efx_channel *channel;
+ struct efx_tx_queue *tx_queue;
+ struct efx_rx_queue *rx_queue;
+ int i, rc;
+
+ /* Initialise common structures */
+ memset(efx, 0, sizeof(*efx));
+ spin_lock_init(&efx->biu_lock);
+ spin_lock_init(&efx->phy_lock);
+ INIT_WORK(&efx->reset_work, efx_reset_work);
+ INIT_DELAYED_WORK(&efx->monitor_work, efx_monitor);
+ efx->pci_dev = pci_dev;
+ efx->state = STATE_INIT;
+ efx->reset_pending = RESET_TYPE_NONE;
+ strlcpy(efx->name, pci_name(pci_dev), sizeof(efx->name));
+ efx->board_info = efx_dummy_board_info;
+
+ efx->net_dev = net_dev;
+ efx->rx_checksum_enabled = 1;
+ spin_lock_init(&efx->netif_stop_lock);
+ spin_lock_init(&efx->stats_lock);
+ mutex_init(&efx->mac_lock);
+ efx->phy_op = &efx_dummy_phy_operations;
+ efx->mii.dev = net_dev;
+ INIT_WORK(&efx->reconfigure_work, efx_reconfigure_work);
+ atomic_set(&efx->netif_stop_count, 1);
+
+ for (i = 0; i < EFX_MAX_CHANNELS; i++) {
+ channel = &efx->channel[i];
+ channel->efx = efx;
+ channel->channel = i;
+ channel->evqnum = i;
+ channel->work_pending = 0;
+ }
+ for (i = 0; i < EFX_MAX_TX_QUEUES; i++) {
+ tx_queue = &efx->tx_queue[i];
+ tx_queue->efx = efx;
+ tx_queue->queue = i;
+ tx_queue->buffer = NULL;
+ tx_queue->channel = &efx->channel[0]; /* for safety */
+ }
+ for (i = 0; i < EFX_MAX_RX_QUEUES; i++) {
+ rx_queue = &efx->rx_queue[i];
+ rx_queue->efx = efx;
+ rx_queue->queue = i;
+ rx_queue->channel = &efx->channel[0]; /* for safety */
+ rx_queue->buffer = NULL;
+ spin_lock_init(&rx_queue->add_lock);
+ INIT_DELAYED_WORK(&rx_queue->work, efx_rx_work);
+ }
+
+ efx->type = type;
+
+ /* Sanity-check NIC type */
+ EFX_BUG_ON_PARANOID(efx->type->txd_ring_mask &
+ (efx->type->txd_ring_mask + 1));
+ EFX_BUG_ON_PARANOID(efx->type->rxd_ring_mask &
+ (efx->type->rxd_ring_mask + 1));
+ EFX_BUG_ON_PARANOID(efx->type->evq_size &
+ (efx->type->evq_size - 1));
+ /* As close as we can get to guaranteeing that we don't overflow */
+ EFX_BUG_ON_PARANOID(efx->type->evq_size <
+ (efx->type->txd_ring_mask + 1 +
+ efx->type->rxd_ring_mask + 1));
+ EFX_BUG_ON_PARANOID(efx->type->phys_addr_channels > EFX_MAX_CHANNELS);
+
+ /* Higher numbered interrupt modes are less capable! */
+ efx->interrupt_mode = max(efx->type->max_interrupt_mode,
+ interrupt_mode);
+
+ efx->workqueue = create_singlethread_workqueue("sfc_work");
+ if (!efx->workqueue) {
+ rc = -ENOMEM;
+ goto fail1;
+ }
+
+ return 0;
+
+ fail1:
+ return rc;
+}
+
+static void efx_fini_struct(struct efx_nic *efx)
+{
+ if (efx->workqueue) {
+ destroy_workqueue(efx->workqueue);
+ efx->workqueue = NULL;
+ }
+}
+
+/**************************************************************************
+ *
+ * PCI interface
+ *
+ **************************************************************************/
+
+/* Main body of final NIC shutdown code
+ * This is called only at module unload (or hotplug removal).
+ */
+static void efx_pci_remove_main(struct efx_nic *efx)
+{
+ EFX_ASSERT_RESET_SERIALISED(efx);
+
+ /* Skip everything if we never obtained a valid membase */
+ if (!efx->membase)
+ return;
+
+ efx_fini_channels(efx);
+ efx_fini_port(efx);
+
+ /* Shutdown the board, then the NIC and board state */
+ falcon_fini_interrupt(efx);
+
+ efx_fini_napi(efx);
+ efx_remove_all(efx);
+}
+
+/* Final NIC shutdown
+ * This is called only at module unload (or hotplug removal).
+ */
+static void efx_pci_remove(struct pci_dev *pci_dev)
+{
+ struct efx_nic *efx;
+
+ efx = pci_get_drvdata(pci_dev);
+ if (!efx)
+ return;
+
+ /* Mark the NIC as fini, then stop the interface */
+ rtnl_lock();
+ efx->state = STATE_FINI;
+ dev_close(efx->net_dev);
+
+ /* Allow any queued efx_resets() to complete */
+ rtnl_unlock();
+
+ if (efx->membase == NULL)
+ goto out;
+
+ efx_unregister_netdev(efx);
+
+ /* Wait for any scheduled resets to complete. No more will be
+ * scheduled from this point because efx_stop_all() has been
+ * called, we are no longer registered with driverlink, and
+ * the net_device's have been removed. */
+ flush_workqueue(efx->workqueue);
+
+ efx_pci_remove_main(efx);
+
+out:
+ efx_fini_io(efx);
+ EFX_LOG(efx, "shutdown successful\n");
+
+ pci_set_drvdata(pci_dev, NULL);
+ efx_fini_struct(efx);
+ free_netdev(efx->net_dev);
+};
+
+/* Main body of NIC initialisation
+ * This is called at module load (or hotplug insertion, theoretically).
+ */
+static int efx_pci_probe_main(struct efx_nic *efx)
+{
+ int rc;
+
+ /* Do start-of-day initialisation */
+ rc = efx_probe_all(efx);
+ if (rc)
+ goto fail1;
+
+ rc = efx_init_napi(efx);
+ if (rc)
+ goto fail2;
+
+ /* Initialise the board */
+ rc = efx->board_info.init(efx);
+ if (rc) {
+ EFX_ERR(efx, "failed to initialise board\n");
+ goto fail3;
+ }
+
+ rc = falcon_init_nic(efx);
+ if (rc) {
+ EFX_ERR(efx, "failed to initialise NIC\n");
+ goto fail4;
+ }
+
+ rc = efx_init_port(efx);
+ if (rc) {
+ EFX_ERR(efx, "failed to initialise port\n");
+ goto fail5;
+ }
+
+ rc = efx_init_channels(efx);
+ if (rc)
+ goto fail6;
+
+ rc = falcon_init_interrupt(efx);
+ if (rc)
+ goto fail7;
+
+ return 0;
+
+ fail7:
+ efx_fini_channels(efx);
+ fail6:
+ efx_fini_port(efx);
+ fail5:
+ fail4:
+ fail3:
+ efx_fini_napi(efx);
+ fail2:
+ efx_remove_all(efx);
+ fail1:
+ return rc;
+}
+
+/* NIC initialisation
+ *
+ * This is called at module load (or hotplug insertion,
+ * theoretically). It sets up PCI mappings, tests and resets the NIC,
+ * sets up and registers the network devices with the kernel and hooks
+ * the interrupt service routine. It does not prepare the device for
+ * transmission; this is left to the first time one of the network
+ * interfaces is brought up (i.e. efx_net_open).
+ */
+static int __devinit efx_pci_probe(struct pci_dev *pci_dev,
+ const struct pci_device_id *entry)
+{
+ struct efx_nic_type *type = (struct efx_nic_type *) entry->driver_data;
+ struct net_device *net_dev;
+ struct efx_nic *efx;
+ int i, rc;
+
+ /* Allocate and initialise a struct net_device and struct efx_nic */
+ net_dev = alloc_etherdev(sizeof(*efx));
+ if (!net_dev)
+ return -ENOMEM;
+ net_dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_HIGHDMA;
+ if (lro)
+ net_dev->features |= NETIF_F_LRO;
+ efx = net_dev->priv;
+ pci_set_drvdata(pci_dev, efx);
+ rc = efx_init_struct(efx, type, pci_dev, net_dev);
+ if (rc)
+ goto fail1;
+
+ EFX_INFO(efx, "Solarflare Communications NIC detected\n");
+
+ /* Set up basic I/O (BAR mappings etc) */
+ rc = efx_init_io(efx);
+ if (rc)
+ goto fail2;
+
+ /* No serialisation is required with the reset path because
+ * we're in STATE_INIT. */
+ for (i = 0; i < 5; i++) {
+ rc = efx_pci_probe_main(efx);
+ if (rc == 0)
+ break;
+
+ /* Serialise against efx_reset(). No more resets will be
+ * scheduled since efx_stop_all() has been called, and we
+ * have not and never have been registered with either
+ * the rtnetlink or driverlink layers. */
+ cancel_work_sync(&efx->reset_work);
+
+ /* Retry if a recoverably reset event has been scheduled */
+ if ((efx->reset_pending != RESET_TYPE_INVISIBLE) &&
+ (efx->reset_pending != RESET_TYPE_ALL))
+ goto fail3;
+
+ efx->reset_pending = RESET_TYPE_NONE;
+ }
+
+ if (rc) {
+ EFX_ERR(efx, "Could not reset NIC\n");
+ goto fail4;
+ }
+
+ /* Switch to the running state before we expose the device to
+ * the OS. This is to ensure that the initial gathering of
+ * MAC stats succeeds. */
+ rtnl_lock();
+ efx->state = STATE_RUNNING;
+ rtnl_unlock();
+
+ rc = efx_register_netdev(efx);
+ if (rc)
+ goto fail5;
+
+ EFX_LOG(efx, "initialisation successful\n");
+
+ return 0;
+
+ fail5:
+ efx_pci_remove_main(efx);
+ fail4:
+ fail3:
+ efx_fini_io(efx);
+ fail2:
+ efx_fini_struct(efx);
+ fail1:
+ EFX_LOG(efx, "initialisation failed. rc=%d\n", rc);
+ free_netdev(net_dev);
+ return rc;
+}
+
+static struct pci_driver efx_pci_driver = {
+ .name = EFX_DRIVER_NAME,
+ .id_table = efx_pci_table,
+ .probe = efx_pci_probe,
+ .remove = efx_pci_remove,
+};
+
+/**************************************************************************
+ *
+ * Kernel module interface
+ *
+ *************************************************************************/
+
+module_param(interrupt_mode, uint, 0444);
+MODULE_PARM_DESC(interrupt_mode,
+ "Interrupt mode (0=>MSIX 1=>MSI 2=>legacy)");
+
+static int __init efx_init_module(void)
+{
+ int rc;
+
+ printk(KERN_INFO "Solarflare NET driver v" EFX_DRIVER_VERSION "\n");
+
+ rc = register_netdevice_notifier(&efx_netdev_notifier);
+ if (rc)
+ goto err_notifier;
+
+ refill_workqueue = create_workqueue("sfc_refill");
+ if (!refill_workqueue) {
+ rc = -ENOMEM;
+ goto err_refill;
+ }
+
+ rc = pci_register_driver(&efx_pci_driver);
+ if (rc < 0)
+ goto err_pci;
+
+ return 0;
+
+ err_pci:
+ destroy_workqueue(refill_workqueue);
+ err_refill:
+ unregister_netdevice_notifier(&efx_netdev_notifier);
+ err_notifier:
+ return rc;
+}
+
+static void __exit efx_exit_module(void)
+{
+ printk(KERN_INFO "Solarflare NET driver unloading\n");
+
+ pci_unregister_driver(&efx_pci_driver);
+ destroy_workqueue(refill_workqueue);
+ unregister_netdevice_notifier(&efx_netdev_notifier);
+
+}
+
+module_init(efx_init_module);
+module_exit(efx_exit_module);
+
+MODULE_AUTHOR("Michael Brown <mbrown@fensystems.co.uk> and "
+ "Solarflare Communications");
+MODULE_DESCRIPTION("Solarflare Communications network driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, efx_pci_table);