diff options
Diffstat (limited to 'drivers/net/sky2.c')
-rw-r--r-- | drivers/net/sky2.c | 845 |
1 files changed, 495 insertions, 350 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 7eeefa2..fb1d2c3 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -10,8 +10,7 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation; either version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -50,19 +49,18 @@ #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "1.7" +#define DRV_VERSION "1.10" #define PFX DRV_NAME " " /* * The Yukon II chipset takes 64 bit command blocks (called list elements) * that are organized into three (receive, transmit, status) different rings - * similar to Tigon3. A transmit can require several elements; - * a receive requires one (or two if using 64 bit dma). + * similar to Tigon3. */ -#define RX_LE_SIZE 512 +#define RX_LE_SIZE 1024 #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le)) -#define RX_MAX_PENDING (RX_LE_SIZE/2 - 2) +#define RX_MAX_PENDING (RX_LE_SIZE/6 - 2) #define RX_DEF_PENDING RX_MAX_PENDING #define RX_SKB_ALIGN 8 #define RX_BUF_WRITE 16 @@ -74,7 +72,6 @@ #define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */ #define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le)) -#define ETH_JUMBO_MTU 9000 #define TX_WATCHDOG (5 * HZ) #define NAPI_WEIGHT 64 #define PHY_RETRIES 1000 @@ -90,7 +87,7 @@ static int debug = -1; /* defaults above */ module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); -static int copybreak __read_mostly = 256; +static int copybreak __read_mostly = 128; module_param(copybreak, int, 0); MODULE_PARM_DESC(copybreak, "Receive copy threshold"); @@ -98,37 +95,37 @@ static int disable_msi = 0; module_param(disable_msi, int, 0); MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)"); -static int idle_timeout = 100; +static int idle_timeout = 0; module_param(idle_timeout, int, 0); -MODULE_PARM_DESC(idle_timeout, "Idle timeout workaround for lost interrupts (ms)"); +MODULE_PARM_DESC(idle_timeout, "Watchdog timer for lost interrupts (ms)"); static const struct pci_device_id sky2_id_table[] = { - { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, - { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, + { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */ + { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, /* DGE-550SX */ - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B02) }, /* DGE-560SX */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, /* 88E8021 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, /* 88E8022 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, /* 88E8061 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) }, /* 88E8062 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) }, /* 88E8021 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) }, /* 88E8022 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) }, /* 88E8061 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) }, /* 88E8062 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, /* 88E8035 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, /* 88E8036 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */ { 0 } }; @@ -286,6 +283,31 @@ static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port) gma_write16(hw, port, GM_RX_CTRL, reg); } +/* flow control to advertise bits */ +static const u16 copper_fc_adv[] = { + [FC_NONE] = 0, + [FC_TX] = PHY_M_AN_ASP, + [FC_RX] = PHY_M_AN_PC, + [FC_BOTH] = PHY_M_AN_PC | PHY_M_AN_ASP, +}; + +/* flow control to advertise bits when using 1000BaseX */ +static const u16 fiber_fc_adv[] = { + [FC_BOTH] = PHY_M_P_BOTH_MD_X, + [FC_TX] = PHY_M_P_ASYM_MD_X, + [FC_RX] = PHY_M_P_SYM_MD_X, + [FC_NONE] = PHY_M_P_NO_PAUSE_X, +}; + +/* flow control to GMA disable bits */ +static const u16 gm_fc_disable[] = { + [FC_NONE] = GM_GPCR_FC_RX_DIS | GM_GPCR_FC_TX_DIS, + [FC_TX] = GM_GPCR_FC_RX_DIS, + [FC_RX] = GM_GPCR_FC_TX_DIS, + [FC_BOTH] = 0, +}; + + static void sky2_phy_init(struct sky2_hw *hw, unsigned port) { struct sky2_port *sky2 = netdev_priv(hw->dev[port]); @@ -358,16 +380,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); } - ctrl = gm_phy_read(hw, port, PHY_MARV_CTRL); - if (sky2->autoneg == AUTONEG_DISABLE) - ctrl &= ~PHY_CT_ANE; - else - ctrl |= PHY_CT_ANE; - - ctrl |= PHY_CT_RESET; - gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); - - ctrl = 0; + ctrl = PHY_CT_RESET; ct1000 = 0; adv = PHY_AN_CSMA; reg = 0; @@ -386,20 +399,16 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) adv |= PHY_M_AN_10_FD; if (sky2->advertising & ADVERTISED_10baseT_Half) adv |= PHY_M_AN_10_HD; + + adv |= copper_fc_adv[sky2->flow_mode]; } else { /* special defines for FIBER (88E1040S only) */ if (sky2->advertising & ADVERTISED_1000baseT_Full) adv |= PHY_M_AN_1000X_AFD; if (sky2->advertising & ADVERTISED_1000baseT_Half) adv |= PHY_M_AN_1000X_AHD; - } - /* Set Flow-control capabilities */ - if (sky2->tx_pause && sky2->rx_pause) - adv |= PHY_AN_PAUSE_CAP; /* symmetric */ - else if (sky2->rx_pause && !sky2->tx_pause) - adv |= PHY_AN_PAUSE_ASYM | PHY_AN_PAUSE_CAP; - else if (!sky2->rx_pause && sky2->tx_pause) - adv |= PHY_AN_PAUSE_ASYM; /* local */ + adv |= fiber_fc_adv[sky2->flow_mode]; + } /* Restart Auto-negotiation */ ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG; @@ -424,25 +433,17 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) if (sky2->duplex == DUPLEX_FULL) { reg |= GM_GPCR_DUP_FULL; ctrl |= PHY_CT_DUP_MD; - } else if (sky2->speed != SPEED_1000 && hw->chip_id != CHIP_ID_YUKON_EC_U) { - /* Turn off flow control for 10/100mbps */ - sky2->rx_pause = 0; - sky2->tx_pause = 0; - } + } else if (sky2->speed < SPEED_1000) + sky2->flow_mode = FC_NONE; - if (!sky2->rx_pause) - reg |= GM_GPCR_FC_RX_DIS; - if (!sky2->tx_pause) - reg |= GM_GPCR_FC_TX_DIS; + reg |= gm_fc_disable[sky2->flow_mode]; /* Forward pause packets to GMAC? */ - if (sky2->tx_pause || sky2->rx_pause) + if (sky2->flow_mode & FC_RX) sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON); else sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); - - ctrl |= PHY_CT_RESET; } gma_write16(hw, port, GM_GP_CTRL, reg); @@ -520,7 +521,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */ ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL; /* turn off the Rx LED (LED_RX) */ - ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); + ledover &= ~PHY_M_LED_MO_RX; } if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == CHIP_REV_YU_EC_A1) { @@ -543,7 +544,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) { /* turn on 100 Mbps LED (LED_LINK100) */ - ledover |= PHY_M_LED_MO_100(MO_LED_ON); + ledover |= PHY_M_LED_MO_100; } if (ledover) @@ -675,10 +676,8 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) /* Flush Rx MAC FIFO on any flow control or error */ sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR); - /* Set threshold to 0xa (64 bytes) - * ASF disabled so no need to do WA dev #4.30 - */ - sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF); + /* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */ + sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF+1); /* Configure Tx MAC FIFO */ sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); @@ -697,16 +696,15 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) } -/* Assign Ram Buffer allocation. - * start and end are in units of 4k bytes - * ram registers are in units of 64bit words - */ -static void sky2_ramset(struct sky2_hw *hw, u16 q, u8 startk, u8 endk) +/* Assign Ram Buffer allocation to queue */ +static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, u32 space) { - u32 start, end; + u32 end; - start = startk * 4096/8; - end = (endk * 4096/8) - 1; + /* convert from K bytes to qwords used for hw register */ + start *= 1024/8; + space *= 1024/8; + end = start + space - 1; sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR); sky2_write32(hw, RB_ADDR(q, RB_START), start); @@ -715,7 +713,6 @@ static void sky2_ramset(struct sky2_hw *hw, u16 q, u8 startk, u8 endk) sky2_write32(hw, RB_ADDR(q, RB_RP), start); if (q == Q_R1 || q == Q_R2) { - u32 space = (endk - startk) * 4096/8; u32 tp = space - space/4; /* On receive queue's set the thresholds @@ -769,9 +766,16 @@ static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2) struct sky2_tx_le *le = sky2->tx_le + sky2->tx_prod; sky2->tx_prod = RING_NEXT(sky2->tx_prod, TX_RING_SIZE); + le->ctrl = 0; return le; } +static inline struct tx_ring_info *tx_le_re(struct sky2_port *sky2, + struct sky2_tx_le *le) +{ + return sky2->tx_ring + (le - sky2->tx_le); +} + /* Update chip's next pointer */ static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx) { @@ -786,6 +790,7 @@ static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2) { struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put; sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE); + le->ctrl = 0; return le; } @@ -795,17 +800,16 @@ static inline u32 high32(dma_addr_t a) return sizeof(a) > sizeof(u32) ? (a >> 16) >> 16 : 0; } -/* Build description to hardware about buffer */ -static void sky2_rx_add(struct sky2_port *sky2, dma_addr_t map) +/* Build description to hardware for one receive segment */ +static void sky2_rx_add(struct sky2_port *sky2, u8 op, + dma_addr_t map, unsigned len) { struct sky2_rx_le *le; u32 hi = high32(map); - u16 len = sky2->rx_bufsize; if (sky2->rx_addr64 != hi) { le = sky2_next_rx(sky2); le->addr = cpu_to_le32(hi); - le->ctrl = 0; le->opcode = OP_ADDR64 | HW_OWNER; sky2->rx_addr64 = high32(map + len); } @@ -813,10 +817,52 @@ static void sky2_rx_add(struct sky2_port *sky2, dma_addr_t map) le = sky2_next_rx(sky2); le->addr = cpu_to_le32((u32) map); le->length = cpu_to_le16(len); - le->ctrl = 0; - le->opcode = OP_PACKET | HW_OWNER; + le->opcode = op | HW_OWNER; } +/* Build description to hardware for one possibly fragmented skb */ +static void sky2_rx_submit(struct sky2_port *sky2, + const struct rx_ring_info *re) +{ + int i; + + sky2_rx_add(sky2, OP_PACKET, re->data_addr, sky2->rx_data_size); + + for (i = 0; i < skb_shinfo(re->skb)->nr_frags; i++) + sky2_rx_add(sky2, OP_BUFFER, re->frag_addr[i], PAGE_SIZE); +} + + +static void sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re, + unsigned size) +{ + struct sk_buff *skb = re->skb; + int i; + + re->data_addr = pci_map_single(pdev, skb->data, size, PCI_DMA_FROMDEVICE); + pci_unmap_len_set(re, data_size, size); + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) + re->frag_addr[i] = pci_map_page(pdev, + skb_shinfo(skb)->frags[i].page, + skb_shinfo(skb)->frags[i].page_offset, + skb_shinfo(skb)->frags[i].size, + PCI_DMA_FROMDEVICE); +} + +static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re) +{ + struct sk_buff *skb = re->skb; + int i; + + pci_unmap_single(pdev, re->data_addr, pci_unmap_len(re, data_size), + PCI_DMA_FROMDEVICE); + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) + pci_unmap_page(pdev, re->frag_addr[i], + skb_shinfo(skb)->frags[i].size, + PCI_DMA_FROMDEVICE); +} /* Tell chip where to start receive checksum. * Actually has two checksums, but set both same to avoid possible byte @@ -877,12 +923,10 @@ static void sky2_rx_clean(struct sky2_port *sky2) memset(sky2->rx_le, 0, RX_LE_BYTES); for (i = 0; i < sky2->rx_pending; i++) { - struct ring_info *re = sky2->rx_ring + i; + struct rx_ring_info *re = sky2->rx_ring + i; if (re->skb) { - pci_unmap_single(sky2->hw->pdev, - re->mapaddr, sky2->rx_bufsize, - PCI_DMA_FROMDEVICE); + sky2_rx_unmap_skb(sky2->hw->pdev, re); kfree_skb(re->skb); re->skb = NULL; } @@ -936,13 +980,13 @@ static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp struct sky2_hw *hw = sky2->hw; u16 port = sky2->port; - spin_lock_bh(&sky2->tx_lock); + netif_tx_lock_bh(dev); sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_ON); sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_ON); sky2->vlgrp = grp; - spin_unlock_bh(&sky2->tx_lock); + netif_tx_unlock_bh(dev); } static void sky2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) @@ -951,83 +995,137 @@ static void sky2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) struct sky2_hw *hw = sky2->hw; u16 port = sky2->port; - spin_lock_bh(&sky2->tx_lock); + netif_tx_lock_bh(dev); sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_OFF); sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_OFF); if (sky2->vlgrp) sky2->vlgrp->vlan_devices[vid] = NULL; - spin_unlock_bh(&sky2->tx_lock); + netif_tx_unlock_bh(dev); } #endif /* + * Allocate an skb for receiving. If the MTU is large enough + * make the skb non-linear with a fragment list of pages. + * * It appears the hardware has a bug in the FIFO logic that * cause it to hang if the FIFO gets overrun and the receive buffer * is not 64 byte aligned. The buffer returned from netdev_alloc_skb is * aligned except if slab debugging is enabled. */ -static inline struct sk_buff *sky2_alloc_skb(struct net_device *dev, - unsigned int length, - gfp_t gfp_mask) +static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2) { struct sk_buff *skb; + unsigned long p; + int i; - skb = __netdev_alloc_skb(dev, length + RX_SKB_ALIGN, gfp_mask); - if (likely(skb)) { - unsigned long p = (unsigned long) skb->data; - skb_reserve(skb, ALIGN(p, RX_SKB_ALIGN) - p); + skb = netdev_alloc_skb(sky2->netdev, sky2->rx_data_size + RX_SKB_ALIGN); + if (!skb) + goto nomem; + + p = (unsigned long) skb->data; + skb_reserve(skb, ALIGN(p, RX_SKB_ALIGN) - p); + + for (i = 0; i < sky2->rx_nfrags; i++) { + struct page *page = alloc_page(GFP_ATOMIC); + + if (!page) + goto free_partial; + skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE); } return skb; +free_partial: + kfree_skb(skb); +nomem: + return NULL; } /* * Allocate and setup receiver buffer pool. - * In case of 64 bit dma, there are 2X as many list elements - * available as ring entries - * and need to reserve one list element so we don't wrap around. + * Normal case this ends up creating one list element for skb + * in the receive ring. Worst case if using large MTU and each + * allocation falls on a different 64 bit region, that results + * in 6 list elements per ring entry. + * One element is used for checksum enable/disable, and one + * extra to avoid wrap. */ static int sky2_rx_start(struct sky2_port *sky2) { struct sky2_hw *hw = sky2->hw; + struct rx_ring_info *re; unsigned rxq = rxqaddr[sky2->port]; - int i; - unsigned thresh; + unsigned i, size, space, thresh; sky2->rx_put = sky2->rx_next = 0; sky2_qset(hw, rxq); - if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) { - /* MAC Rx RAM Read is controlled by hardware */ + /* On PCI express lowering the watermark gives better performance */ + if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) + sky2_write32(hw, Q_ADDR(rxq, Q_WM), BMU_WM_PEX); + + /* These chips have no ram buffer? + * MAC Rx RAM Read is controlled by hardware */ + if (hw->chip_id == CHIP_ID_YUKON_EC_U && + (hw->chip_rev == CHIP_REV_YU_EC_U_A1 + || hw->chip_rev == CHIP_REV_YU_EC_U_B0)) sky2_write32(hw, Q_ADDR(rxq, Q_F), F_M_RX_RAM_DIS); - } sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1); rx_set_checksum(sky2); + + /* Space needed for frame data + headers rounded up */ + size = ALIGN(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8) + + 8; + + /* Stopping point for hardware truncation */ + thresh = (size - 8) / sizeof(u32); + + /* Account for overhead of skb - to avoid order > 0 allocation */ + space = SKB_DATA_ALIGN(size) + NET_SKB_PAD + + sizeof(struct skb_shared_info); + + sky2->rx_nfrags = space >> PAGE_SHIFT; + BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr)); + + if (sky2->rx_nfrags != 0) { + /* Compute residue after pages */ + space = sky2->rx_nfrags << PAGE_SHIFT; + + if (space < size) + size -= space; + else + size = 0; + + /* Optimize to handle small packets and headers */ + if (size < copybreak) + size = copybreak; + if (size < ETH_HLEN) + size = ETH_HLEN; + } + sky2->rx_data_size = size; + + /* Fill Rx ring */ for (i = 0; i < sky2->rx_pending; i++) { - struct ring_info *re = sky2->rx_ring + i; + re = sky2->rx_ring + i; - re->skb = sky2_alloc_skb(sky2->netdev, sky2->rx_bufsize, - GFP_KERNEL); + re->skb = sky2_rx_alloc(sky2); if (!re->skb) goto nomem; - re->mapaddr = pci_map_single(hw->pdev, re->skb->data, - sky2->rx_bufsize, PCI_DMA_FROMDEVICE); - sky2_rx_add(sky2, re->mapaddr); + sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size); + sky2_rx_submit(sky2, re); } - /* * The receiver hangs if it receives frames larger than the * packet buffer. As a workaround, truncate oversize frames, but * the register is limited to 9 bits, so if you do frames > 2052 * you better get the MTU right! */ - thresh = (sky2->rx_bufsize - 8) / sizeof(u32); if (thresh > 0x1ff) sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF); else { @@ -1035,7 +1133,6 @@ static int sky2_rx_start(struct sky2_port *sky2) sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON); } - /* Tell chip about available buffers */ sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put); return 0; @@ -1050,7 +1147,7 @@ static int sky2_up(struct net_device *dev) struct sky2_port *sky2 = netdev_priv(dev); struct sky2_hw *hw = sky2->hw; unsigned port = sky2->port; - u32 ramsize, rxspace, imask; + u32 ramsize, imask; int cap, err = -ENOMEM; struct net_device *otherdev = hw->dev[sky2->port^1]; @@ -1094,7 +1191,7 @@ static int sky2_up(struct net_device *dev) goto err_out; memset(sky2->rx_le, 0, RX_LE_BYTES); - sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct ring_info), + sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct rx_ring_info), GFP_KERNEL); if (!sky2->rx_ring) goto err_out; @@ -1103,28 +1200,31 @@ static int sky2_up(struct net_device *dev) sky2_mac_init(hw, port); - /* Determine available ram buffer space (in 4K blocks). - * Note: not sure about the FE setting below yet - */ - if (hw->chip_id == CHIP_ID_YUKON_FE) - ramsize = 4; - else - ramsize = sky2_read8(hw, B2_E_0); + /* Register is number of 4K blocks on internal RAM buffer. */ + ramsize = sky2_read8(hw, B2_E_0) * 4; + printk(KERN_INFO PFX "%s: ram buffer %dK\n", dev->name, ramsize); - /* Give transmitter one third (rounded up) */ - rxspace = ramsize - (ramsize + 2) / 3; + if (ramsize > 0) { + u32 rxspace; - sky2_ramset(hw, rxqaddr[port], 0, rxspace); - sky2_ramset(hw, txqaddr[port], rxspace, ramsize); + if (ramsize < 16) + rxspace = ramsize / 2; + else + rxspace = 8 + (2*(ramsize - 16))/3; - /* Make sure SyncQ is disabled */ - sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL), - RB_RST_SET); + sky2_ramset(hw, rxqaddr[port], 0, rxspace); + sky2_ramset(hw, txqaddr[port], rxspace, ramsize - rxspace); + + /* Make sure SyncQ is disabled */ + sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL), + RB_RST_SET); + } sky2_qset(hw, txqaddr[port]); /* Set almost empty threshold */ - if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == 1) + if (hw->chip_id == CHIP_ID_YUKON_EC_U + && hw->chip_rev == CHIP_REV_YU_EC_U_A0) sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0); sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map, @@ -1195,8 +1295,6 @@ static unsigned tx_le_req(const struct sk_buff *skb) * A single packet can generate multiple list elements, and * the number of ring elements will probably be less than the number * of list elements used. - * - * No BH disabling for tx_lock here (like tg3) */ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) { @@ -1210,27 +1308,8 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) u16 mss; u8 ctrl; - /* No BH disabling for tx_lock here. We are running in BH disabled - * context and TX reclaim runs via poll inside of a software - * interrupt, and no related locks in IRQ processing. - */ - if (!spin_trylock(&sky2->tx_lock)) - return NETDEV_TX_LOCKED; - - if (unlikely(tx_avail(sky2) < tx_le_req(skb))) { - /* There is a known but harmless race with lockless tx - * and netif_stop_queue. - */ - if (!netif_queue_stopped(dev)) { - netif_stop_queue(dev); - if (net_ratelimit()) - printk(KERN_WARNING PFX "%s: ring full when queue awake!\n", - dev->name); - } - spin_unlock(&sky2->tx_lock); - - return NETDEV_TX_BUSY; - } + if (unlikely(tx_avail(sky2) < tx_le_req(skb))) + return NETDEV_TX_BUSY; if (unlikely(netif_msg_tx_queued(sky2))) printk(KERN_DEBUG "%s: tx queued, slot %u, len %d\n", @@ -1240,13 +1319,10 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE); addr64 = high32(mapping); - re = sky2->tx_ring + sky2->tx_prod; - /* Send high bits if changed or crosses boundary */ if (addr64 != sky2->tx_addr64 || high32(mapping + len) != sky2->tx_addr64) { le = get_tx_le(sky2); le->addr = cpu_to_le32(addr64); - le->ctrl = 0; le->opcode = OP_ADDR64 | HW_OWNER; sky2->tx_addr64 = high32(mapping + len); } @@ -1262,7 +1338,6 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) le = get_tx_le(sky2); le->addr = cpu_to_le32(mss); le->opcode = OP_LRGLEN | HW_OWNER; - le->ctrl = 0; sky2->tx_last_mss = mss; } } @@ -1275,7 +1350,6 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) le = get_tx_le(sky2); le->addr = 0; le->opcode = OP_VLAN|HW_OWNER; - le->ctrl = 0; } else le->opcode |= OP_VLAN; le->length = cpu_to_be16(vlan_tx_tag_get(skb)); @@ -1289,7 +1363,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) u32 tcpsum; tcpsum = offset << 16; /* sum start */ - tcpsum |= offset + skb->csum; /* sum write */ + tcpsum |= offset + skb->csum_offset; /* sum write */ ctrl = CALSUM | WR_SUM | INIT_SUM | LOCK_SUM; if (skb->nh.iph->protocol == IPPROTO_UDP) @@ -1312,13 +1386,13 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) le->ctrl = ctrl; le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER); - /* Record the transmit mapping info */ + re = tx_le_re(sky2, le); re->skb = skb; pci_unmap_addr_set(re, mapaddr, mapping); + pci_unmap_len_set(re, maplen, len); for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { - skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; - struct tx_ring_info *fre; + const skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset, frag->size, PCI_DMA_TODEVICE); @@ -1337,12 +1411,12 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) le->ctrl = ctrl; le->opcode = OP_BUFFER | HW_OWNER; - fre = sky2->tx_ring - + RING_NEXT((re - sky2->tx_ring) + i, TX_RING_SIZE); - pci_unmap_addr_set(fre, mapaddr, mapping); + re = tx_le_re(sky2, le); + re->skb = skb; + pci_unmap_addr_set(re, mapaddr, mapping); + pci_unmap_len_set(re, maplen, frag->size); } - re->idx = sky2->tx_prod; le->ctrl |= EOP; if (tx_avail(sky2) <= MAX_SKB_TX_LE) @@ -1350,8 +1424,6 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod); - spin_unlock(&sky2->tx_lock); - dev->trans_start = jiffies; return NETDEV_TX_OK; } @@ -1360,59 +1432,59 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) * Free ring elements from starting at tx_cons until "done" * * NB: the hardware will tell us about partial completion of multi-part - * buffers; these are deferred until completion. + * buffers so make sure not to free skb to early. */ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) { struct net_device *dev = sky2->netdev; struct pci_dev *pdev = sky2->hw->pdev; - u16 nxt, put; - unsigned i; + unsigned idx; BUG_ON(done >= TX_RING_SIZE); - if (unlikely(netif_msg_tx_done(sky2))) - printk(KERN_DEBUG "%s: tx done, up to %u\n", - dev->name, done); - - for (put = sky2->tx_cons; put != done; put = nxt) { - struct tx_ring_info *re = sky2->tx_ring + put; - struct sk_buff *skb = re->skb; - - nxt = re->idx; - BUG_ON(nxt >= TX_RING_SIZE); - prefetch(sky2->tx_ring + nxt); - - /* Check for partial status */ - if (tx_dist(put, done) < tx_dist(put, nxt)) + for (idx = sky2->tx_cons; idx != done; + idx = RING_NEXT(idx, TX_RING_SIZE)) { + struct sky2_tx_le *le = sky2->tx_le + idx; + struct tx_ring_info *re = sky2->tx_ring + idx; + + switch(le->opcode & ~HW_OWNER) { + case OP_LARGESEND: + case OP_PACKET: + pci_unmap_single(pdev, + pci_unmap_addr(re, mapaddr), + pci_unmap_len(re, maplen), + PCI_DMA_TODEVICE); break; - - skb = re->skb; - pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr), - skb_headlen(skb), PCI_DMA_TODEVICE); - - for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { - struct tx_ring_info *fre; - fre = sky2->tx_ring + RING_NEXT(put + i, TX_RING_SIZE); - pci_unmap_page(pdev, pci_unmap_addr(fre, mapaddr), - skb_shinfo(skb)->frags[i].size, + case OP_BUFFER: + pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr), + pci_unmap_len(re, maplen), PCI_DMA_TODEVICE); + break; } - dev_kfree_skb(skb); + if (le->ctrl & EOP) { + if (unlikely(netif_msg_tx_done(sky2))) + printk(KERN_DEBUG "%s: tx done %u\n", + dev->name, idx); + dev_kfree_skb_any(re->skb); + } + + le->opcode = 0; /* paranoia */ } - sky2->tx_cons = put; + sky2->tx_cons = idx; if (tx_avail(sky2) > MAX_SKB_TX_LE + 4) netif_wake_queue(dev); } /* Cleanup all untransmitted buffers, assume transmitter not running */ -static void sky2_tx_clean(struct sky2_port *sky2) +static void sky2_tx_clean(struct net_device *dev) { - spin_lock_bh(&sky2->tx_lock); + struct sky2_port *sky2 = netdev_priv(dev); + + netif_tx_lock_bh(dev); sky2_tx_complete(sky2, sky2->tx_prod); - spin_unlock_bh(&sky2->tx_lock); + netif_tx_unlock_bh(dev); } /* Network shutdown */ @@ -1434,6 +1506,11 @@ static int sky2_down(struct net_device *dev) /* Stop more packets from being queued */ netif_stop_queue(dev); + /* Disable port IRQ */ + imask = sky2_read32(hw, B0_IMSK); + imask &= ~portirq_msk[port]; + sky2_write32(hw, B0_IMSK, imask); + sky2_gmac_reset(hw, port); /* Stop transmitter */ @@ -1443,6 +1520,13 @@ static int sky2_down(struct net_device *dev) sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET | RB_DIS_OP_MD); + /* WA for dev. #4.209 */ + if (hw->chip_id == CHIP_ID_YUKON_EC_U + && (hw->chip_rev == CHIP_REV_YU_EC_U_A1 || hw->chip_rev == CHIP_REV_YU_EC_U_B0)) + sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), + sky2->speed != SPEED_1000 ? + TX_STFW_ENA : TX_STFW_DIS); + ctrl = gma_read16(hw, port, GM_GP_CTRL); ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA); gma_write16(hw, port, GM_GP_CTRL, ctrl); @@ -1477,11 +1561,6 @@ static int sky2_down(struct net_device *dev) sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); - /* Disable port IRQ */ - imask = sky2_read32(hw, B0_IMSK); - imask &= ~portirq_msk[port]; - sky2_write32(hw, B0_IMSK, imask); - sky2_phy_power(hw, port, 0); /* turn off LED's */ @@ -1489,7 +1568,7 @@ static int sky2_down(struct net_device *dev) synchronize_irq(hw->pdev->irq); - sky2_tx_clean(sky2); + sky2_tx_clean(dev); sky2_rx_clean(sky2); pci_free_consistent(hw->pdev, RX_LE_BYTES, @@ -1533,6 +1612,12 @@ static void sky2_link_up(struct sky2_port *sky2) struct sky2_hw *hw = sky2->hw; unsigned port = sky2->port; u16 reg; + static const char *fc_name[] = { + [FC_NONE] = "none", + [FC_TX] = "tx", + [FC_RX] = "rx", + [FC_BOTH] = "both", + }; /* enable Rx/Tx */ reg = gma_read16(hw, port, GM_GP_CTRL); @@ -1576,8 +1661,7 @@ static void sky2_link_up(struct sky2_port *sky2) "%s: Link is up at %d Mbps, %s duplex, flow control %s\n", sky2->netdev->name, sky2->speed, sky2->duplex == DUPLEX_FULL ? "full" : "half", - (sky2->tx_pause && sky2->rx_pause) ? "both" : - sky2->tx_pause ? "tx" : sky2->rx_pause ? "rx" : "none"); + fc_name[sky2->flow_status]); } static void sky2_link_down(struct sky2_port *sky2) @@ -1592,7 +1676,7 @@ static void sky2_link_down(struct sky2_port *sky2) reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA); gma_write16(hw, port, GM_GP_CTRL, reg); - if (sky2->rx_pause && !sky2->tx_pause) { + if (sky2->flow_status == FC_RX) { /* restore Asymmetric Pause bit */ gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, gm_phy_read(hw, port, PHY_MARV_AUNE_ADV) @@ -1611,6 +1695,14 @@ static void sky2_link_down(struct sky2_port *sky2) sky2_phy_init(hw, port); } +static enum flow_control sky2_flow(int rx, int tx) +{ + if (rx) + return tx ? FC_BOTH : FC_RX; + else + return tx ? FC_TX : FC_NONE; +} + static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux) { struct sky2_hw *hw = sky2->hw; @@ -1624,35 +1716,27 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux) return -1; } - if (hw->chip_id != CHIP_ID_YUKON_FE && - gm_phy_read(hw, port, PHY_MARV_1000T_STAT) & PHY_B_1000S_MSF) { - printk(KERN_ERR PFX "%s: master/slave fault", - sky2->netdev->name); - return -1; - } - if (!(aux & PHY_M_PS_SPDUP_RES)) { printk(KERN_ERR PFX "%s: speed/duplex mismatch", sky2->netdev->name); return -1; } - sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF; - sky2->speed = sky2_phy_speed(hw, aux); + sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF; /* Pause bits are offset (9..8) */ if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U) aux >>= 6; - sky2->rx_pause = (aux & PHY_M_PS_RX_P_EN) != 0; - sky2->tx_pause = (aux & PHY_M_PS_TX_P_EN) != 0; + sky2->flow_status = sky2_flow(aux & PHY_M_PS_RX_P_EN, + aux & PHY_M_PS_TX_P_EN); - if (sky2->duplex == DUPLEX_HALF && sky2->speed != SPEED_1000 + if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000 && hw->chip_id != CHIP_ID_YUKON_EC_U) - sky2->rx_pause = sky2->tx_pause = 0; + sky2->flow_status = FC_NONE; - if (sky2->rx_pause || sky2->tx_pause) + if (aux & PHY_M_PS_RX_P_EN) sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON); else sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); @@ -1667,13 +1751,13 @@ static void sky2_phy_intr(struct sky2_hw *hw, unsigned port) struct sky2_port *sky2 = netdev_priv(dev); u16 istatus, phystat; + if (!netif_running(dev)) + return; + spin_lock(&sky2->phy_lock); istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT); phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT); - if (!netif_running(dev)) - goto out; - if (netif_msg_intr(sky2)) printk(KERN_INFO PFX "%s: phy interrupt status 0x%x 0x%x\n", sky2->netdev->name, istatus, phystat); @@ -1730,31 +1814,22 @@ static void sky2_tx_timeout(struct net_device *dev) } else if (report != sky2->tx_cons) { printk(KERN_INFO PFX "status report lost?\n"); - spin_lock_bh(&sky2->tx_lock); + netif_tx_lock_bh(dev); sky2_tx_complete(sky2, report); - spin_unlock_bh(&sky2->tx_lock); + netif_tx_unlock_bh(dev); } else { printk(KERN_INFO PFX "hardware hung? flushing\n"); sky2_write32(hw, Q_ADDR(txq, Q_CSR), BMU_STOP); sky2_write32(hw, Y2_QADDR(txq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); - sky2_tx_clean(sky2); + sky2_tx_clean(dev); sky2_qset(hw, txq); sky2_prefetch_init(hw, txq, sky2->tx_le_map, TX_RING_SIZE - 1); } } - -/* Want receive buffer size to be multiple of 64 bits - * and incl room for vlan and truncation - */ -static inline unsigned sky2_buf_size(int mtu) -{ - return ALIGN(mtu + ETH_HLEN + VLAN_HLEN, 8) + 8; -} - static int sky2_change_mtu(struct net_device *dev, int new_mtu) { struct sky2_port *sky2 = netdev_priv(dev); @@ -1789,7 +1864,7 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) sky2_rx_clean(sky2); dev->mtu = new_mtu; - sky2->rx_bufsize = sky2_buf_size(new_mtu); + mode = DATA_BLIND_VAL(DATA_BLIND_DEF) | GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF); @@ -1815,16 +1890,100 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) return err; } +/* For small just reuse existing skb for next receive */ +static struct sk_buff *receive_copy(struct sky2_port *sky2, + const struct rx_ring_info *re, + unsigned length) +{ + struct sk_buff *skb; + + skb = netdev_alloc_skb(sky2->netdev, length + 2); + if (likely(skb)) { + skb_reserve(skb, 2); + pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->data_addr, + length, PCI_DMA_FROMDEVICE); + memcpy(skb->data, re->skb->data, length); + skb->ip_summed = re->skb->ip_summed; + skb->csum = re->skb->csum; + pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr, + length, PCI_DMA_FROMDEVICE); + re->skb->ip_summed = CHECKSUM_NONE; + skb_put(skb, length); + } + return skb; +} + +/* Adjust length of skb with fragments to match received data */ +static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space, + unsigned int length) +{ + int i, num_frags; + unsigned int size; + + /* put header into skb */ + size = min(length, hdr_space); + skb->tail += size; + skb->len += size; + length -= size; + + num_frags = skb_shinfo(skb)->nr_frags; + for (i = 0; i < num_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + if (length == 0) { + /* don't need this page */ + __free_page(frag->page); + --skb_shinfo(skb)->nr_frags; + } else { + size = min(length, (unsigned) PAGE_SIZE); + + frag->size = size; + skb->data_len += size; + skb->truesize += size; + skb->len += size; + length -= size; + } + } +} + +/* Normal packet - take skb from ring element and put in a new one */ +static struct sk_buff *receive_new(struct sky2_port *sky2, + struct rx_ring_info *re, + unsigned int length) +{ + struct sk_buff *skb, *nskb; + unsigned hdr_space = sky2->rx_data_size; + + pr_debug(PFX "receive new length=%d\n", length); + + /* Don't be tricky about reusing pages (yet) */ + nskb = sky2_rx_alloc(sky2); + if (unlikely(!nskb)) + return NULL; + + skb = re->skb; + sky2_rx_unmap_skb(sky2->hw->pdev, re); + + prefetch(skb->data); + re->skb = nskb; + sky2_rx_map_skb(sky2->hw->pdev, re, hdr_space); + + if (skb_shinfo(skb)->nr_frags) + skb_put_frags(skb, hdr_space, length); + else + skb_put(skb, length); + return skb; +} + /* * Receive one packet. - * For small packets or errors, just reuse existing skb. * For larger packets, get new buffer. */ static struct sk_buff *sky2_receive(struct net_device *dev, u16 length, u32 status) { struct sky2_port *sky2 = netdev_priv(dev); - struct ring_info *re = sky2->rx_ring + sky2->rx_next; + struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next; struct sk_buff *skb = NULL; if (unlikely(netif_msg_rx_status(sky2))) @@ -1843,40 +2002,12 @@ static struct sk_buff *sky2_receive(struct net_device *dev, if (length > dev->mtu + ETH_HLEN) goto oversize; - if (length < copybreak) { - skb = netdev_alloc_skb(dev, length + 2); - if (!skb) - goto resubmit; - - skb_reserve(skb, 2); - pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->mapaddr, - length, PCI_DMA_FROMDEVICE); - memcpy(skb->data, re->skb->data, length); - skb->ip_summed = re->skb->ip_summed; - skb->csum = re->skb->csum; - pci_dma_sync_single_for_device(sky2->hw->pdev, re->mapaddr, - length, PCI_DMA_FROMDEVICE); - } else { - struct sk_buff *nskb; - - nskb = sky2_alloc_skb(dev, sky2->rx_bufsize, GFP_ATOMIC); - if (!nskb) - goto resubmit; - - skb = re->skb; - re->skb = nskb; - pci_unmap_single(sky2->hw->pdev, re->mapaddr, - sky2->rx_bufsize, PCI_DMA_FROMDEVICE); - prefetch(skb->data); - - re->mapaddr = pci_map_single(sky2->hw->pdev, nskb->data, - sky2->rx_bufsize, PCI_DMA_FROMDEVICE); - } - - skb_put(skb, length); + if (length < copybreak) + skb = receive_copy(sky2, re, length); + else + skb = receive_new(sky2, re, length); resubmit: - re->skb->ip_summed = CHECKSUM_NONE; - sky2_rx_add(sky2, re->mapaddr); + sky2_rx_submit(sky2, re); return skb; @@ -1886,6 +2017,10 @@ oversize: error: ++sky2->net_stats.rx_errors; + if (status & GMR_FS_RX_FF_OV) { + sky2->net_stats.rx_fifo_errors++; + goto resubmit; + } if (netif_msg_rx_err(sky2) && net_ratelimit()) printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n", @@ -1897,8 +2032,6 @@ error: sky2->net_stats.rx_frame_errors++; if (status & GMR_FS_CRC_ERR) sky2->net_stats.rx_crc_errors++; - if (status & GMR_FS_RX_FF_OV) - sky2->net_stats.rx_fifo_errors++; goto resubmit; } @@ -1909,9 +2042,9 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last) struct sky2_port *sky2 = netdev_priv(dev); if (netif_running(dev)) { - spin_lock(&sky2->tx_lock); + netif_tx_lock(dev); sky2_tx_complete(sky2, last); - spin_unlock(&sky2->tx_lock); + netif_tx_unlock(dev); } } @@ -1945,7 +2078,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) case OP_RXSTAT: skb = sky2_receive(dev, length, status); if (!skb) - break; + goto force_update; skb->protocol = eth_type_trans(skb, dev); dev->last_rx = jiffies; @@ -1961,8 +2094,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) /* Update receiver after 16 frames */ if (++buf_write[le->link] == RX_BUF_WRITE) { - sky2_put_idx(hw, rxqaddr[le->link], - sky2->rx_put); +force_update: + sky2_put_idx(hw, rxqaddr[le->link], sky2->rx_put); buf_write[le->link] = 0; } @@ -2082,7 +2215,7 @@ static void sky2_hw_intr(struct sky2_hw *hw) sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); sky2_pci_write16(hw, PCI_STATUS, - pci_err | PCI_STATUS_ERROR_BITS); + pci_err | PCI_STATUS_ERROR_BITS); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } @@ -2228,7 +2361,7 @@ static int sky2_poll(struct net_device *dev0, int *budget) } } -static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t sky2_intr(int irq, void *dev_id) { struct sky2_hw *hw = dev_id; struct net_device *dev0 = hw->dev[0]; @@ -2618,7 +2751,7 @@ static int sky2_nway_reset(struct net_device *dev) { struct sky2_port *sky2 = netdev_priv(dev); - if (sky2->autoneg != AUTONEG_ENABLE) + if (!netif_running(dev) || sky2->autoneg != AUTONEG_ENABLE) return -EINVAL; sky2_phy_reinit(sky2); @@ -2720,6 +2853,14 @@ static int sky2_set_mac_address(struct net_device *dev, void *p) return 0; } +static void inline sky2_add_filter(u8 filter[8], const u8 *addr) +{ + u32 bit; + + bit = ether_crc(ETH_ALEN, addr) & 63; + filter[bit >> 3] |= 1 << (bit & 7); +} + static void sky2_set_multicast(struct net_device *dev) { struct sky2_port *sky2 = netdev_priv(dev); @@ -2728,7 +2869,10 @@ static void sky2_set_multicast(struct net_device *dev) struct dev_mc_list *list = dev->mc_list; u16 reg; u8 filter[8]; + int rx_pause; + static const u8 pause_mc_addr[ETH_ALEN] = { 0x1, 0x80, 0xc2, 0x0, 0x0, 0x1 }; + rx_pause = (sky2->flow_status == FC_RX || sky2->flow_status == FC_BOTH); memset(filter, 0, sizeof(filter)); reg = gma_read16(hw, port, GM_RX_CTRL); @@ -2736,18 +2880,19 @@ static void sky2_set_multicast(struct net_device *dev) if (dev->flags & IFF_PROMISC) /* promiscuous */ reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); - else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count > 16) /* all multicast */ + else if (dev->flags & IFF_ALLMULTI) memset(filter, 0xff, sizeof(filter)); - else if (dev->mc_count == 0) /* no multicast */ + else if (dev->mc_count == 0 && !rx_pause) reg &= ~GM_RXCR_MCF_ENA; else { int i; reg |= GM_RXCR_MCF_ENA; - for (i = 0; list && i < dev->mc_count; i++, list = list->next) { - u32 bit = ether_crc(ETH_ALEN, list->dmi_addr) & 0x3f; - filter[bit / 8] |= 1 << (bit % 8); - } + if (rx_pause) + sky2_add_filter(filter, pause_mc_addr); + + for (i = 0; list && i < dev->mc_count; i++, list = list->next) + sky2_add_filter(filter, list->dmi_addr); } gma_write16(hw, port, GM_MC_ADDR_H1, @@ -2785,18 +2930,8 @@ static void sky2_led(struct sky2_hw *hw, unsigned port, int on) default: gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); - gm_phy_write(hw, port, PHY_MARV_LED_OVER, - on ? PHY_M_LED_MO_DUP(MO_LED_ON) | - PHY_M_LED_MO_10(MO_LED_ON) | - PHY_M_LED_MO_100(MO_LED_ON) | - PHY_M_LED_MO_1000(MO_LED_ON) | - PHY_M_LED_MO_RX(MO_LED_ON) - : PHY_M_LED_MO_DUP(MO_LED_OFF) | - PHY_M_LED_MO_10(MO_LED_OFF) | - PHY_M_LED_MO_100(MO_LED_OFF) | - PHY_M_LED_MO_1000(MO_LED_OFF) | - PHY_M_LED_MO_RX(MO_LED_OFF)); - + gm_phy_write(hw, port, PHY_MARV_LED_OVER, + on ? PHY_M_LED_ALL : 0); } } @@ -2860,8 +2995,20 @@ static void sky2_get_pauseparam(struct net_device *dev, { struct sky2_port *sky2 = netdev_priv(dev); - ecmd->tx_pause = sky2->tx_pause; - ecmd->rx_pause = sky2->rx_pause; + switch (sky2->flow_mode) { + case FC_NONE: + ecmd->tx_pause = ecmd->rx_pause = 0; + break; + case FC_TX: + ecmd->tx_pause = 1, ecmd->rx_pause = 0; + break; + case FC_RX: + ecmd->tx_pause = 0, ecmd->rx_pause = 1; + break; + case FC_BOTH: + ecmd->tx_pause = ecmd->rx_pause = 1; + } + ecmd->autoneg = sky2->autoneg; } @@ -2871,10 +3018,10 @@ static int sky2_set_pauseparam(struct net_device *dev, struct sky2_port *sky2 = netdev_priv(dev); sky2->autoneg = ecmd->autoneg; - sky2->tx_pause = ecmd->tx_pause != 0; - sky2->rx_pause = ecmd->rx_pause != 0; + sky2->flow_mode = sky2_flow(ecmd->rx_pause, ecmd->tx_pause); - sky2_phy_reinit(sky2); + if (netif_running(dev)) + sky2_phy_reinit(sky2); return 0; } @@ -3094,7 +3241,11 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, dev->poll = sky2_poll; dev->weight = NAPI_WEIGHT; #ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = sky2_netpoll; + /* Network console (only works on port 0) + * because netpoll makes assumptions about NAPI + */ + if (port == 0) + dev->poll_controller = sky2_netpoll; #endif sky2 = netdev_priv(dev); @@ -3102,11 +3253,10 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, sky2->hw = hw; sky2->msg_enable = netif_msg_init(debug, default_msg); - spin_lock_init(&sky2->tx_lock); /* Auto speed and flow control */ sky2->autoneg = AUTONEG_ENABLE; - sky2->tx_pause = 1; - sky2->rx_pause = 1; + sky2->flow_mode = FC_BOTH; + sky2->duplex = -1; sky2->speed = -1; sky2->advertising = sky2_supported_modes(hw); @@ -3115,13 +3265,11 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, spin_lock_init(&sky2->phy_lock); sky2->tx_pending = TX_DEF_PENDING; sky2->rx_pending = RX_DEF_PENDING; - sky2->rx_bufsize = sky2_buf_size(ETH_DATA_LEN); hw->dev[port] = dev; sky2->port = port; - dev->features |= NETIF_F_LLTX; if (hw->chip_id != CHIP_ID_YUKON_EC_U) dev->features |= NETIF_F_TSO; if (highmem) @@ -3157,8 +3305,7 @@ static void __devinit sky2_show_addr(struct net_device *dev) } /* Handle software interrupt used during MSI test */ -static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id, - struct pt_regs *regs) +static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id) { struct sky2_hw *hw = dev_id; u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2); @@ -3167,7 +3314,7 @@ static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id, return IRQ_NONE; if (status & Y2_IS_IRQ_SW) { - hw->msi_detected = 1; + hw->msi = 1; wake_up(&hw->msi_wait); sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ); } @@ -3186,7 +3333,7 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw) sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW); - err = request_irq(pdev->irq, sky2_test_intr, IRQF_SHARED, DRV_NAME, hw); + err = request_irq(pdev->irq, sky2_test_intr, 0, DRV_NAME, hw); if (err) { printk(KERN_ERR PFX "%s: cannot assign irq %d\n", pci_name(pdev), pdev->irq); @@ -3196,13 +3343,12 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw) sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ); sky2_read8(hw, B0_CTST); - wait_event_timeout(hw->msi_wait, hw->msi_detected, HZ/10); + wait_event_timeout(hw->msi_wait, hw->msi, HZ/10); - if (!hw->msi_detected) { + if (!hw->msi) { /* MSI test failed, go back to INTx mode */ - printk(KERN_WARNING PFX "%s: No interrupt was generated using MSI, " - "switching to INTx mode. Please report this failure to " - "the PCI maintainer and include system chipset information.\n", + printk(KERN_INFO PFX "%s: No interrupt generated using MSI, " + "switching to INTx mode.\n", pci_name(pdev)); err = -EOPNOTSUPP; @@ -3210,6 +3356,7 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw) } sky2_write32(hw, B0_IMSK, 0); + sky2_read32(hw, B0_IMSK); free_irq(pdev->irq, hw); @@ -3316,6 +3463,14 @@ static int __devinit sky2_probe(struct pci_dev *pdev, if (!dev) goto err_out_free_pci; + if (!disable_msi && pci_enable_msi(pdev) == 0) { + err = sky2_test_msi(hw); + if (err == -EOPNOTSUPP) + pci_disable_msi(pdev); + else if (err) + goto err_out_free_netdev; + } + err = register_netdev(dev); if (err) { printk(KERN_ERR PFX "%s: cannot register net device\n", @@ -3323,6 +3478,15 @@ static int __devinit sky2_probe(struct pci_dev *pdev, goto err_out_free_netdev; } + err = request_irq(pdev->irq, sky2_intr, hw->msi ? 0 : IRQF_SHARED, + dev->name, hw); + if (err) { + printk(KERN_ERR PFX "%s: cannot assign irq %d\n", + pci_name(pdev), pdev->irq); + goto err_out_unregister; + } + sky2_write32(hw, B0_IMSK, Y2_IS_BASE); + sky2_show_addr(dev); if (hw->ports > 1 && (dev1 = sky2_init_netdev(hw, 1, using_dac))) { @@ -3337,23 +3501,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev, } } - if (!disable_msi && pci_enable_msi(pdev) == 0) { - err = sky2_test_msi(hw); - if (err == -EOPNOTSUPP) - pci_disable_msi(pdev); - else if (err) - goto err_out_unregister; - } - - err = request_irq(pdev->irq, sky2_intr, IRQF_SHARED, DRV_NAME, hw); - if (err) { - printk(KERN_ERR PFX "%s: cannot assign irq %d\n", - pci_name(pdev), pdev->irq); - goto err_out_unregister; - } - - sky2_write32(hw, B0_IMSK, Y2_IS_BASE); - setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw); sky2_idle_start(hw); @@ -3362,11 +3509,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev, return 0; err_out_unregister: - pci_disable_msi(pdev); - if (dev1) { - unregister_netdev(dev1); - free_netdev(dev1); - } + if (hw->msi) + pci_disable_msi(pdev); unregister_netdev(dev); err_out_free_netdev: free_netdev(dev); @@ -3409,7 +3553,8 @@ static void __devexit sky2_remove(struct pci_dev *pdev) sky2_read8(hw, B0_CTST); free_irq(pdev->irq, hw); - pci_disable_msi(pdev); + if (hw->msi) + pci_disable_msi(pdev); pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma); pci_release_regions(pdev); pci_disable_device(pdev); |