diff options
Diffstat (limited to 'drivers/net/wan')
-rw-r--r-- | drivers/net/wan/hostess_sv11.c | 11 | ||||
-rw-r--r-- | drivers/net/wan/lapbether.c | 18 | ||||
-rw-r--r-- | drivers/net/wan/pc300_drv.c | 4 | ||||
-rw-r--r-- | drivers/net/wan/sbni.c | 67 | ||||
-rw-r--r-- | drivers/net/wan/sealevel.c | 11 | ||||
-rw-r--r-- | drivers/net/wan/x25_asy.c | 47 | ||||
-rw-r--r-- | drivers/net/wan/z85230.c | 34 |
7 files changed, 96 insertions, 96 deletions
diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c index e817583..3d80e42 100644 --- a/drivers/net/wan/hostess_sv11.c +++ b/drivers/net/wan/hostess_sv11.c @@ -20,6 +20,8 @@ * Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl> */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/kernel.h> #include <linux/mm.h> @@ -192,8 +194,7 @@ static struct z8530_dev *sv11_init(int iobase, int irq) */ if (!request_region(iobase, 8, "Comtrol SV11")) { - printk(KERN_WARNING "hostess: I/O 0x%X already in use.\n", - iobase); + pr_warn("I/O 0x%X already in use\n", iobase); return NULL; } @@ -221,7 +222,7 @@ static struct z8530_dev *sv11_init(int iobase, int irq) if (request_irq(irq, z8530_interrupt, IRQF_DISABLED, "Hostess SV11", sv) < 0) { - printk(KERN_WARNING "hostess: IRQ %d already in use.\n", irq); + pr_warn("IRQ %d already in use\n", irq); goto err_irq; } @@ -255,7 +256,7 @@ static struct z8530_dev *sv11_init(int iobase, int irq) */ if (z8530_init(sv)) { - printk(KERN_ERR "Z8530 series device not found.\n"); + pr_err("Z8530 series device not found\n"); enable_irq(irq); goto free_dma; } @@ -282,7 +283,7 @@ static struct z8530_dev *sv11_init(int iobase, int irq) netdev->irq = irq; if (register_hdlc_device(netdev)) { - printk(KERN_ERR "hostess: unable to register HDLC device.\n"); + pr_err("unable to register HDLC device\n"); free_netdev(netdev); goto free_dma; } diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c index eec463f..a817081 100644 --- a/drivers/net/wan/lapbether.c +++ b/drivers/net/wan/lapbether.c @@ -20,6 +20,8 @@ * 2000-11-14 Henner Eisen dev_hold/put, NETDEV_GOING_DOWN support */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/errno.h> #include <linux/types.h> #include <linux/socket.h> @@ -165,13 +167,11 @@ static netdev_tx_t lapbeth_xmit(struct sk_buff *skb, break; case X25_IFACE_CONNECT: if ((err = lapb_connect_request(dev)) != LAPB_OK) - printk(KERN_ERR "lapbeth: lapb_connect_request " - "error: %d\n", err); + pr_err("lapb_connect_request error: %d\n", err); goto drop; case X25_IFACE_DISCONNECT: if ((err = lapb_disconnect_request(dev)) != LAPB_OK) - printk(KERN_ERR "lapbeth: lapb_disconnect_request " - "err: %d\n", err); + pr_err("lapb_disconnect_request err: %d\n", err); /* Fall thru */ default: goto drop; @@ -180,7 +180,7 @@ static netdev_tx_t lapbeth_xmit(struct sk_buff *skb, skb_pull(skb, 1); if ((err = lapb_data_request(dev, skb)) != LAPB_OK) { - printk(KERN_ERR "lapbeth: lapb_data_request error - %d\n", err); + pr_err("lapb_data_request error - %d\n", err); goto drop; } out: @@ -220,7 +220,7 @@ static void lapbeth_connected(struct net_device *dev, int reason) struct sk_buff *skb = dev_alloc_skb(1); if (!skb) { - printk(KERN_ERR "lapbeth: out of memory\n"); + pr_err("out of memory\n"); return; } @@ -237,7 +237,7 @@ static void lapbeth_disconnected(struct net_device *dev, int reason) struct sk_buff *skb = dev_alloc_skb(1); if (!skb) { - printk(KERN_ERR "lapbeth: out of memory\n"); + pr_err("out of memory\n"); return; } @@ -277,7 +277,7 @@ static int lapbeth_open(struct net_device *dev) int err; if ((err = lapb_register(dev, &lapbeth_callbacks)) != LAPB_OK) { - printk(KERN_ERR "lapbeth: lapb_register error - %d\n", err); + pr_err("lapb_register error: %d\n", err); return -ENODEV; } @@ -292,7 +292,7 @@ static int lapbeth_close(struct net_device *dev) netif_stop_queue(dev); if ((err = lapb_unregister(dev)) != LAPB_OK) - printk(KERN_ERR "lapbeth: lapb_unregister error - %d\n", err); + pr_err("lapb_unregister error: %d\n", err); return 0; } diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c index 9617d3d..1eeedd6 100644 --- a/drivers/net/wan/pc300_drv.c +++ b/drivers/net/wan/pc300_drv.c @@ -212,6 +212,8 @@ static const char rcsid[] = * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/kernel.h> #include <linux/mm.h> @@ -3242,7 +3244,7 @@ static inline void show_version(void) rcsdate++; tmp = strrchr(rcsdate, ' '); *tmp = '\0'; - printk(KERN_INFO "Cyclades-PC300 driver %s %s\n", rcsvers, rcsdate); + pr_info("Cyclades-PC300 driver %s %s\n", rcsvers, rcsdate); } /* show_version */ static const struct net_device_ops cpc_netdev_ops = { diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c index cff13a9..40e95fa 100644 --- a/drivers/net/wan/sbni.c +++ b/drivers/net/wan/sbni.c @@ -37,6 +37,8 @@ * Known problem: this driver wasn't tested on multiprocessor machine. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/kernel.h> #include <linux/ptrace.h> @@ -200,8 +202,8 @@ sbni_isa_probe( struct net_device *dev ) return 0; else { - printk( KERN_ERR "sbni: base address 0x%lx is busy, or adapter " - "is malfunctional!\n", dev->base_addr ); + pr_err("base address 0x%lx is busy, or adapter is malfunctional!\n", + dev->base_addr); return -ENODEV; } } @@ -226,7 +228,6 @@ static void __init sbni_devsetup(struct net_device *dev) int __init sbni_probe(int unit) { struct net_device *dev; - static unsigned version_printed __initdata = 0; int err; dev = alloc_netdev(sizeof(struct net_local), "sbni", sbni_devsetup); @@ -250,8 +251,7 @@ int __init sbni_probe(int unit) free_netdev(dev); return err; } - if( version_printed++ == 0 ) - printk( KERN_INFO "%s", version ); + pr_info_once("%s", version); return 0; } @@ -326,9 +326,9 @@ sbni_pci_probe( struct net_device *dev ) } if (pci_irq_line <= 0 || pci_irq_line >= nr_irqs) - printk( KERN_WARNING - " WARNING: The PCI BIOS assigned this PCI card to IRQ %d, which is unlikely to work!.\n" - " You should use the PCI BIOS setup to assign a valid IRQ line.\n", + pr_warn( +"WARNING: The PCI BIOS assigned this PCI card to IRQ %d, which is unlikely to work!.\n" +"You should use the PCI BIOS setup to assign a valid IRQ line.\n", pci_irq_line ); /* avoiding re-enable dual adapters */ @@ -372,8 +372,7 @@ sbni_probe1( struct net_device *dev, unsigned long ioaddr, int irq ) outb( 0, ioaddr + CSR0 ); if( !irq ) { - printk( KERN_ERR "%s: can't detect device irq!\n", - dev->name ); + pr_err("%s: can't detect device irq!\n", dev->name); release_region( ioaddr, SBNI_IO_EXTENT ); return NULL; } @@ -386,7 +385,7 @@ sbni_probe1( struct net_device *dev, unsigned long ioaddr, int irq ) /* Fill in sbni-specific dev fields. */ nl = netdev_priv(dev); if( !nl ) { - printk( KERN_ERR "%s: unable to get memory!\n", dev->name ); + pr_err("%s: unable to get memory!\n", dev->name); release_region( ioaddr, SBNI_IO_EXTENT ); return NULL; } @@ -415,21 +414,21 @@ sbni_probe1( struct net_device *dev, unsigned long ioaddr, int irq ) if( inb( ioaddr + CSR0 ) & 0x01 ) nl->state |= FL_SLOW_MODE; - printk( KERN_NOTICE "%s: ioaddr %#lx, irq %d, " - "MAC: 00:ff:01:%02x:%02x:%02x\n", - dev->name, dev->base_addr, dev->irq, - ((u8 *) dev->dev_addr) [3], - ((u8 *) dev->dev_addr) [4], - ((u8 *) dev->dev_addr) [5] ); + pr_notice("%s: ioaddr %#lx, irq %d, MAC: 00:ff:01:%02x:%02x:%02x\n", + dev->name, dev->base_addr, dev->irq, + ((u8 *)dev->dev_addr)[3], + ((u8 *)dev->dev_addr)[4], + ((u8 *)dev->dev_addr)[5]); - printk( KERN_NOTICE "%s: speed %d, receive level ", dev->name, - ( (nl->state & FL_SLOW_MODE) ? 500000 : 2000000) - / (1 << nl->csr1.rate) ); + pr_notice("%s: speed %d", + dev->name, + ((nl->state & FL_SLOW_MODE) ? 500000 : 2000000) + / (1 << nl->csr1.rate)); if( nl->delta_rxl == 0 ) - printk( "0x%x (fixed)\n", nl->cur_rxl_index ); + pr_cont(", receive level 0x%x (fixed)\n", nl->cur_rxl_index); else - printk( "(auto)\n"); + pr_cont(", receive level (auto)\n"); #ifdef CONFIG_SBNI_MULTILINE nl->master = dev; @@ -568,7 +567,7 @@ handle_channel( struct net_device *dev ) */ csr0 = inb( ioaddr + CSR0 ); if( !(csr0 & TR_RDY) || (csr0 & RC_RDY) ) - printk( KERN_ERR "%s: internal error!\n", dev->name ); + netdev_err(dev, "internal error!\n"); /* if state & FL_NEED_RESEND != 0 then tx_frameno != 0 */ if( req_ans || nl->tx_frameno != 0 ) @@ -851,7 +850,7 @@ prepare_to_send( struct sk_buff *skb, struct net_device *dev ) /* nl->tx_buf_p == NULL here! */ if( nl->tx_buf_p ) - printk( KERN_ERR "%s: memory leak!\n", dev->name ); + netdev_err(dev, "memory leak!\n"); nl->outpos = 0; nl->state &= ~(FL_WAIT_ACK | FL_NEED_RESEND); @@ -1179,16 +1178,15 @@ sbni_open( struct net_device *dev ) ((struct net_local *) (netdev_priv(*p))) ->second = dev; - printk( KERN_NOTICE "%s: using shared irq " - "with %s\n", dev->name, (*p)->name ); + netdev_notice(dev, "using shared irq with %s\n", + (*p)->name); nl->state |= FL_SECONDARY; goto handler_attached; } } if( request_irq(dev->irq, sbni_interrupt, IRQF_SHARED, dev->name, dev) ) { - printk( KERN_ERR "%s: unable to get IRQ %d.\n", - dev->name, dev->irq ); + netdev_err(dev, "unable to get IRQ %d\n", dev->irq); return -EAGAIN; } @@ -1220,8 +1218,8 @@ sbni_close( struct net_device *dev ) struct net_local *nl = netdev_priv(dev); if( nl->second && nl->second->flags & IFF_UP ) { - printk( KERN_NOTICE "Secondary channel (%s) is active!\n", - nl->second->name ); + netdev_notice(dev, "Secondary channel (%s) is active!\n", + nl->second->name); return -EBUSY; } @@ -1363,8 +1361,8 @@ sbni_ioctl( struct net_device *dev, struct ifreq *ifr, int cmd ) return -EFAULT; slave_dev = dev_get_by_name(&init_net, slave_name ); if( !slave_dev || !(slave_dev->flags & IFF_UP) ) { - printk( KERN_ERR "%s: trying to enslave non-active " - "device %s\n", dev->name, slave_name ); + netdev_err(dev, "trying to enslave non-active device %s\n", + slave_name); return -EPERM; } @@ -1417,8 +1415,7 @@ enslave( struct net_device *dev, struct net_device *slave_dev ) spin_unlock( &snl->lock ); spin_unlock( &nl->lock ); - printk( KERN_NOTICE "%s: slave device (%s) attached.\n", - dev->name, slave_dev->name ); + netdev_notice(dev, "slave device (%s) attached\n", slave_dev->name); return 0; } @@ -1547,7 +1544,7 @@ sbni_setup( char *p ) break; } bad_param: - printk( KERN_ERR "Error in sbni kernel parameter!\n" ); + pr_err("Error in sbni kernel parameter!\n"); return 0; } diff --git a/drivers/net/wan/sealevel.c b/drivers/net/wan/sealevel.c index e91457d..0b4fd05 100644 --- a/drivers/net/wan/sealevel.c +++ b/drivers/net/wan/sealevel.c @@ -12,6 +12,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/kernel.h> #include <linux/mm.h> @@ -190,7 +192,7 @@ static int slvl_setup(struct slvl_device *sv, int iobase, int irq) dev->irq = irq; if (register_hdlc_device(dev)) { - printk(KERN_ERR "sealevel: unable to register HDLC device\n"); + pr_err("unable to register HDLC device\n"); free_netdev(dev); return -1; } @@ -215,8 +217,7 @@ static __init struct slvl_board *slvl_init(int iobase, int irq, */ if (!request_region(iobase, 8, "Sealevel 4021")) { - printk(KERN_WARNING "sealevel: I/O 0x%X already in use.\n", - iobase); + pr_warn("I/O 0x%X already in use\n", iobase); return NULL; } @@ -267,7 +268,7 @@ static __init struct slvl_board *slvl_init(int iobase, int irq, if (request_irq(irq, z8530_interrupt, IRQF_DISABLED, "SeaLevel", dev) < 0) { - printk(KERN_WARNING "sealevel: IRQ %d already in use.\n", irq); + pr_warn("IRQ %d already in use\n", irq); goto err_request_irq; } @@ -292,7 +293,7 @@ static __init struct slvl_board *slvl_init(int iobase, int irq, */ if (z8530_init(dev) != 0) { - printk(KERN_ERR "Z8530 series device not found.\n"); + pr_err("Z8530 series device not found\n"); enable_irq(irq); goto free_hw; } diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c index 24297b2..46ceb3a 100644 --- a/drivers/net/wan/x25_asy.c +++ b/drivers/net/wan/x25_asy.c @@ -14,6 +14,8 @@ * 2000-10-29 Henner Eisen lapb_data_indication() return status. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <asm/system.h> @@ -96,7 +98,7 @@ static struct x25_asy *x25_asy_alloc(void) x25_asy_devs[i] = dev; return sl; } else { - printk(KERN_WARNING "x25_asy_alloc() - register_netdev() failure.\n"); + pr_warn("%s(): register_netdev() failure\n", __func__); free_netdev(dev); } } @@ -114,8 +116,7 @@ static void x25_asy_free(struct x25_asy *sl) sl->xbuff = NULL; if (!test_and_clear_bit(SLF_INUSE, &sl->flags)) - printk(KERN_ERR "%s: x25_asy_free for already free unit.\n", - sl->dev->name); + netdev_err(sl->dev, "x25_asy_free for already free unit\n"); } static int x25_asy_change_mtu(struct net_device *dev, int newmtu) @@ -128,8 +129,7 @@ static int x25_asy_change_mtu(struct net_device *dev, int newmtu) rbuff = kmalloc(len + 4, GFP_ATOMIC); if (xbuff == NULL || rbuff == NULL) { - printk(KERN_WARNING "%s: unable to grow X.25 buffers, MTU change cancelled.\n", - dev->name); + netdev_warn(dev, "unable to grow X.25 buffers, MTU change cancelled\n"); kfree(xbuff); kfree(rbuff); return -ENOMEM; @@ -198,8 +198,7 @@ static void x25_asy_bump(struct x25_asy *sl) skb = dev_alloc_skb(count+1); if (skb == NULL) { - printk(KERN_WARNING "%s: memory squeeze, dropping packet.\n", - sl->dev->name); + netdev_warn(sl->dev, "memory squeeze, dropping packet\n"); dev->stats.rx_dropped++; return; } @@ -287,9 +286,9 @@ static void x25_asy_timeout(struct net_device *dev) /* May be we must check transmitter timeout here ? * 14 Oct 1994 Dmitry Gorodchanin. */ - printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name, - (tty_chars_in_buffer(sl->tty) || sl->xleft) ? - "bad line quality" : "driver error"); + netdev_warn(dev, "transmit timed out, %s?\n", + (tty_chars_in_buffer(sl->tty) || sl->xleft) ? + "bad line quality" : "driver error"); sl->xleft = 0; clear_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags); x25_asy_unlock(sl); @@ -306,8 +305,7 @@ static netdev_tx_t x25_asy_xmit(struct sk_buff *skb, int err; if (!netif_running(sl->dev)) { - printk(KERN_ERR "%s: xmit call when iface is down\n", - dev->name); + netdev_err(dev, "xmit call when iface is down\n"); kfree_skb(skb); return NETDEV_TX_OK; } @@ -318,13 +316,15 @@ static netdev_tx_t x25_asy_xmit(struct sk_buff *skb, case X25_IFACE_CONNECT: /* Connection request .. do nothing */ err = lapb_connect_request(dev); if (err != LAPB_OK) - printk(KERN_ERR "x25_asy: lapb_connect_request error - %d\n", err); + netdev_err(dev, "lapb_connect_request error: %d\n", + err); kfree_skb(skb); return NETDEV_TX_OK; case X25_IFACE_DISCONNECT: /* do nothing - hang up ?? */ err = lapb_disconnect_request(dev); if (err != LAPB_OK) - printk(KERN_ERR "x25_asy: lapb_disconnect_request error - %d\n", err); + netdev_err(dev, "lapb_disconnect_request error: %d\n", + err); default: kfree_skb(skb); return NETDEV_TX_OK; @@ -343,7 +343,7 @@ static netdev_tx_t x25_asy_xmit(struct sk_buff *skb, err = lapb_data_request(dev, skb); if (err != LAPB_OK) { - printk(KERN_ERR "x25_asy: lapb_data_request error - %d\n", err); + netdev_err(dev, "lapb_data_request error: %d\n", err); kfree_skb(skb); return NETDEV_TX_OK; } @@ -378,7 +378,7 @@ static void x25_asy_data_transmit(struct net_device *dev, struct sk_buff *skb) spin_lock(&sl->lock); if (netif_queue_stopped(sl->dev) || sl->tty == NULL) { spin_unlock(&sl->lock); - printk(KERN_ERR "x25_asy: tbusy drop\n"); + netdev_err(dev, "tbusy drop\n"); kfree_skb(skb); return; } @@ -404,7 +404,7 @@ static void x25_asy_connected(struct net_device *dev, int reason) skb = dev_alloc_skb(1); if (skb == NULL) { - printk(KERN_ERR "x25_asy: out of memory\n"); + netdev_err(dev, "out of memory\n"); return; } @@ -423,7 +423,7 @@ static void x25_asy_disconnected(struct net_device *dev, int reason) skb = dev_alloc_skb(1); if (skb == NULL) { - printk(KERN_ERR "x25_asy: out of memory\n"); + netdev_err(dev, "out of memory\n"); return; } @@ -603,8 +603,8 @@ static void x25_asy_close_tty(struct tty_struct *tty) err = lapb_unregister(sl->dev); if (err != LAPB_OK) - printk(KERN_ERR "x25_asy_close: lapb_unregister error -%d\n", - err); + pr_err("x25_asy_close: lapb_unregister error: %d\n", + err); tty->disc_data = NULL; sl->tty = NULL; @@ -782,14 +782,13 @@ static int __init init_x25_asy(void) if (x25_asy_maxdev < 4) x25_asy_maxdev = 4; /* Sanity */ - printk(KERN_INFO "X.25 async: version 0.00 ALPHA " - "(dynamic channels, max=%d).\n", x25_asy_maxdev); + pr_info("X.25 async: version 0.00 ALPHA (dynamic channels, max=%d)\n", + x25_asy_maxdev); x25_asy_devs = kcalloc(x25_asy_maxdev, sizeof(struct net_device *), GFP_KERNEL); if (!x25_asy_devs) { - printk(KERN_WARNING "X25 async: Can't allocate x25_asy_ctrls[] " - "array! Uaargh! (-> No X.25 available)\n"); + pr_warn("Can't allocate x25_asy_ctrls[] array! Uaargh! (-> No X.25 available)\n"); return -ENOMEM; } diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c index 0806232..0e57690 100644 --- a/drivers/net/wan/z85230.c +++ b/drivers/net/wan/z85230.c @@ -36,6 +36,8 @@ * Synchronous mode without DMA is unlikely to pass about 2400 baud. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/kernel.h> #include <linux/mm.h> @@ -365,7 +367,7 @@ static void z8530_rx(struct z8530_channel *c) c->count=0; if(stat&Rx_OVR) { - printk(KERN_WARNING "%s: overrun\n", c->dev->name); + pr_warn("%s: overrun\n", c->dev->name); c->rx_overrun++; } if(stat&CRC_ERR) @@ -464,12 +466,12 @@ static void z8530_status(struct z8530_channel *chan) if (altered & chan->dcdcheck) { if (status & chan->dcdcheck) { - printk(KERN_INFO "%s: DCD raised\n", chan->dev->name); + pr_info("%s: DCD raised\n", chan->dev->name); write_zsreg(chan, R3, chan->regs[3] | RxENABLE); if (chan->netdevice) netif_carrier_on(chan->netdevice); } else { - printk(KERN_INFO "%s: DCD lost\n", chan->dev->name); + pr_info("%s: DCD lost\n", chan->dev->name); write_zsreg(chan, R3, chan->regs[3] & ~RxENABLE); z8530_flush_fifo(chan); if (chan->netdevice) @@ -538,12 +540,12 @@ static void z8530_dma_tx(struct z8530_channel *chan) { if(!chan->dma_tx) { - printk(KERN_WARNING "Hey who turned the DMA off?\n"); + pr_warn("Hey who turned the DMA off?\n"); z8530_tx(chan); return; } /* This shouldn't occur in DMA mode */ - printk(KERN_ERR "DMA tx - bogus event!\n"); + pr_err("DMA tx - bogus event!\n"); z8530_tx(chan); } @@ -585,12 +587,12 @@ static void z8530_dma_status(struct z8530_channel *chan) if (altered & chan->dcdcheck) { if (status & chan->dcdcheck) { - printk(KERN_INFO "%s: DCD raised\n", chan->dev->name); + pr_info("%s: DCD raised\n", chan->dev->name); write_zsreg(chan, R3, chan->regs[3] | RxENABLE); if (chan->netdevice) netif_carrier_on(chan->netdevice); } else { - printk(KERN_INFO "%s:DCD lost\n", chan->dev->name); + pr_info("%s: DCD lost\n", chan->dev->name); write_zsreg(chan, R3, chan->regs[3] & ~RxENABLE); z8530_flush_fifo(chan); if (chan->netdevice) @@ -712,7 +714,7 @@ irqreturn_t z8530_interrupt(int irq, void *dev_id) if(locker) { - printk(KERN_ERR "IRQ re-enter\n"); + pr_err("IRQ re-enter\n"); return IRQ_NONE; } locker=1; @@ -758,7 +760,8 @@ irqreturn_t z8530_interrupt(int irq, void *dev_id) } spin_unlock(&dev->lock); if(work==5000) - printk(KERN_ERR "%s: interrupt jammed - abort(0x%X)!\n", dev->name, intr); + pr_err("%s: interrupt jammed - abort(0x%X)!\n", + dev->name, intr); /* Ok all done */ locker=0; return IRQ_HANDLED; @@ -1225,7 +1228,7 @@ static const char *z8530_type_name[]={ void z8530_describe(struct z8530_dev *dev, char *mapping, unsigned long io) { - printk(KERN_INFO "%s: %s found at %s 0x%lX, IRQ %d.\n", + pr_info("%s: %s found at %s 0x%lX, IRQ %d\n", dev->name, z8530_type_name[dev->type], mapping, @@ -1621,8 +1624,7 @@ static void z8530_rx_done(struct z8530_channel *c) else /* Can't occur as we dont reenable the DMA irq until after the flip is done */ - printk(KERN_WARNING "%s: DMA flip overrun!\n", - c->netdevice->name); + netdev_warn(c->netdevice, "DMA flip overrun!\n"); release_dma_lock(flags); @@ -1637,8 +1639,7 @@ static void z8530_rx_done(struct z8530_channel *c) skb = dev_alloc_skb(ct); if (skb == NULL) { c->netdevice->stats.rx_dropped++; - printk(KERN_WARNING "%s: Memory squeeze.\n", - c->netdevice->name); + netdev_warn(c->netdevice, "Memory squeeze\n"); } else { skb_put(skb, ct); skb_copy_to_linear_data(skb, rxb, ct); @@ -1678,8 +1679,7 @@ static void z8530_rx_done(struct z8530_channel *c) c->skb2 = dev_alloc_skb(c->mtu); if (c->skb2 == NULL) - printk(KERN_WARNING "%s: memory squeeze.\n", - c->netdevice->name); + netdev_warn(c->netdevice, "memory squeeze\n"); else skb_put(c->skb2, c->mtu); c->netdevice->stats.rx_packets++; @@ -1693,7 +1693,7 @@ static void z8530_rx_done(struct z8530_channel *c) c->rx_function(c, skb); } else { c->netdevice->stats.rx_dropped++; - printk(KERN_ERR "%s: Lost a frame\n", c->netdevice->name); + netdev_err(c->netdevice, "Lost a frame\n"); } } |