diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/dvm/lib.c')
-rw-r--r-- | drivers/net/wireless/iwlwifi/dvm/lib.c | 1291 |
1 files changed, 1291 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/dvm/lib.c b/drivers/net/wireless/iwlwifi/dvm/lib.c new file mode 100644 index 0000000..cb1ca7a --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/lib.c @@ -0,0 +1,1291 @@ +/****************************************************************************** + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ +#include <linux/etherdevice.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <net/mac80211.h> + +#include "iwl-io.h" +#include "iwl-agn-hw.h" +#include "iwl-trans.h" +#include "iwl-modparams.h" + +#include "dev.h" +#include "agn.h" + +int iwlagn_hw_valid_rtc_data_addr(u32 addr) +{ + return (addr >= IWLAGN_RTC_DATA_LOWER_BOUND) && + (addr < IWLAGN_RTC_DATA_UPPER_BOUND); +} + +int iwlagn_send_tx_power(struct iwl_priv *priv) +{ + struct iwlagn_tx_power_dbm_cmd tx_power_cmd; + u8 tx_ant_cfg_cmd; + + if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status), + "TX Power requested while scanning!\n")) + return -EAGAIN; + + /* half dBm need to multiply */ + tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt); + + if (tx_power_cmd.global_lmt > priv->eeprom_data->max_tx_pwr_half_dbm) { + /* + * For the newer devices which using enhanced/extend tx power + * table in EEPROM, the format is in half dBm. driver need to + * convert to dBm format before report to mac80211. + * By doing so, there is a possibility of 1/2 dBm resolution + * lost. driver will perform "round-up" operation before + * reporting, but it will cause 1/2 dBm tx power over the + * regulatory limit. Perform the checking here, if the + * "tx_power_user_lmt" is higher than EEPROM value (in + * half-dBm format), lower the tx power based on EEPROM + */ + tx_power_cmd.global_lmt = + priv->eeprom_data->max_tx_pwr_half_dbm; + } + tx_power_cmd.flags = IWLAGN_TX_POWER_NO_CLOSED; + tx_power_cmd.srv_chan_lmt = IWLAGN_TX_POWER_AUTO; + + if (IWL_UCODE_API(priv->fw->ucode_ver) == 1) + tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD_V1; + else + tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD; + + return iwl_dvm_send_cmd_pdu(priv, tx_ant_cfg_cmd, CMD_SYNC, + sizeof(tx_power_cmd), &tx_power_cmd); +} + +void iwlagn_temperature(struct iwl_priv *priv) +{ + lockdep_assert_held(&priv->statistics.lock); + + /* store temperature from correct statistics (in Celsius) */ + priv->temperature = le32_to_cpu(priv->statistics.common.temperature); + iwl_tt_handler(priv); +} + +int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band) +{ + int idx = 0; + int band_offset = 0; + + /* HT rate format: mac80211 wants an MCS number, which is just LSB */ + if (rate_n_flags & RATE_MCS_HT_MSK) { + idx = (rate_n_flags & 0xff); + return idx; + /* Legacy rate format, search for match in table */ + } else { + if (band == IEEE80211_BAND_5GHZ) + band_offset = IWL_FIRST_OFDM_RATE; + for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++) + if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF)) + return idx - band_offset; + } + + return -1; +} + +int iwlagn_manage_ibss_station(struct iwl_priv *priv, + struct ieee80211_vif *vif, bool add) +{ + struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; + + if (add) + return iwlagn_add_bssid_station(priv, vif_priv->ctx, + vif->bss_conf.bssid, + &vif_priv->ibss_bssid_sta_id); + return iwl_remove_station(priv, vif_priv->ibss_bssid_sta_id, + vif->bss_conf.bssid); +} + +/** + * iwlagn_txfifo_flush: send REPLY_TXFIFO_FLUSH command to uCode + * + * pre-requirements: + * 1. acquire mutex before calling + * 2. make sure rf is on and not in exit state + */ +int iwlagn_txfifo_flush(struct iwl_priv *priv, u16 flush_control) +{ + struct iwl_txfifo_flush_cmd flush_cmd; + struct iwl_host_cmd cmd = { + .id = REPLY_TXFIFO_FLUSH, + .len = { sizeof(struct iwl_txfifo_flush_cmd), }, + .flags = CMD_SYNC, + .data = { &flush_cmd, }, + }; + + might_sleep(); + + memset(&flush_cmd, 0, sizeof(flush_cmd)); + if (flush_control & BIT(IWL_RXON_CTX_BSS)) + flush_cmd.fifo_control = IWL_SCD_VO_MSK | IWL_SCD_VI_MSK | + IWL_SCD_BE_MSK | IWL_SCD_BK_MSK | + IWL_SCD_MGMT_MSK; + if ((flush_control & BIT(IWL_RXON_CTX_PAN)) && + (priv->valid_contexts != BIT(IWL_RXON_CTX_BSS))) + flush_cmd.fifo_control |= IWL_PAN_SCD_VO_MSK | + IWL_PAN_SCD_VI_MSK | IWL_PAN_SCD_BE_MSK | + IWL_PAN_SCD_BK_MSK | IWL_PAN_SCD_MGMT_MSK | + IWL_PAN_SCD_MULTICAST_MSK; + + if (priv->hw_params.sku & EEPROM_SKU_CAP_11N_ENABLE) + flush_cmd.fifo_control |= IWL_AGG_TX_QUEUE_MSK; + + IWL_DEBUG_INFO(priv, "fifo queue control: 0X%x\n", + flush_cmd.fifo_control); + flush_cmd.flush_control = cpu_to_le16(flush_control); + + return iwl_dvm_send_cmd(priv, &cmd); +} + +void iwlagn_dev_txfifo_flush(struct iwl_priv *priv, u16 flush_control) +{ + mutex_lock(&priv->mutex); + ieee80211_stop_queues(priv->hw); + if (iwlagn_txfifo_flush(priv, IWL_DROP_ALL)) { + IWL_ERR(priv, "flush request fail\n"); + goto done; + } + IWL_DEBUG_INFO(priv, "wait transmit/flush all frames\n"); + iwl_trans_wait_tx_queue_empty(priv->trans); +done: + ieee80211_wake_queues(priv->hw); + mutex_unlock(&priv->mutex); +} + +/* + * BT coex + */ +/* Notmal TDM */ +static const __le32 iwlagn_def_3w_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = { + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaeaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xcc00ff28), + cpu_to_le32(0x0000aaaa), + cpu_to_le32(0xcc00aaaa), + cpu_to_le32(0x0000aaaa), + cpu_to_le32(0xc0004000), + cpu_to_le32(0x00004000), + cpu_to_le32(0xf0005000), + cpu_to_le32(0xf0005000), +}; + + +/* Loose Coex */ +static const __le32 iwlagn_loose_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = { + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaeaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xcc00ff28), + cpu_to_le32(0x0000aaaa), + cpu_to_le32(0xcc00aaaa), + cpu_to_le32(0x0000aaaa), + cpu_to_le32(0x00000000), + cpu_to_le32(0x00000000), + cpu_to_le32(0xf0005000), + cpu_to_le32(0xf0005000), +}; + +/* Full concurrency */ +static const __le32 iwlagn_concurrent_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = { + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0x00000000), + cpu_to_le32(0x00000000), + cpu_to_le32(0x00000000), + cpu_to_le32(0x00000000), +}; + +void iwlagn_send_advance_bt_config(struct iwl_priv *priv) +{ + struct iwl_basic_bt_cmd basic = { + .max_kill = IWLAGN_BT_MAX_KILL_DEFAULT, + .bt3_timer_t7_value = IWLAGN_BT3_T7_DEFAULT, + .bt3_prio_sample_time = IWLAGN_BT3_PRIO_SAMPLE_DEFAULT, + .bt3_timer_t2_value = IWLAGN_BT3_T2_DEFAULT, + }; + struct iwl_bt_cmd_v1 bt_cmd_v1; + struct iwl_bt_cmd_v2 bt_cmd_v2; + int ret; + + BUILD_BUG_ON(sizeof(iwlagn_def_3w_lookup) != + sizeof(basic.bt3_lookup_table)); + + if (priv->cfg->bt_params) { + /* + * newer generation of devices (2000 series and newer) + * use the version 2 of the bt command + * we need to make sure sending the host command + * with correct data structure to avoid uCode assert + */ + if (priv->cfg->bt_params->bt_session_2) { + bt_cmd_v2.prio_boost = cpu_to_le32( + priv->cfg->bt_params->bt_prio_boost); + bt_cmd_v2.tx_prio_boost = 0; + bt_cmd_v2.rx_prio_boost = 0; + } else { + bt_cmd_v1.prio_boost = + priv->cfg->bt_params->bt_prio_boost; + bt_cmd_v1.tx_prio_boost = 0; + bt_cmd_v1.rx_prio_boost = 0; + } + } else { + IWL_ERR(priv, "failed to construct BT Coex Config\n"); + return; + } + + /* + * Possible situations when BT needs to take over for receive, + * at the same time where STA needs to response to AP's frame(s), + * reduce the tx power of the required response frames, by that, + * allow the concurrent BT receive & WiFi transmit + * (BT - ANT A, WiFi -ANT B), without interference to one another + * + * Reduced tx power apply to control frames only (ACK/Back/CTS) + * when indicated by the BT config command + */ + basic.kill_ack_mask = priv->kill_ack_mask; + basic.kill_cts_mask = priv->kill_cts_mask; + if (priv->reduced_txpower) + basic.reduce_txpower = IWLAGN_BT_REDUCED_TX_PWR; + basic.valid = priv->bt_valid; + + /* + * Configure BT coex mode to "no coexistence" when the + * user disabled BT coexistence, we have no interface + * (might be in monitor mode), or the interface is in + * IBSS mode (no proper uCode support for coex then). + */ + if (!iwlwifi_mod_params.bt_coex_active || + priv->iw_mode == NL80211_IFTYPE_ADHOC) { + basic.flags = IWLAGN_BT_FLAG_COEX_MODE_DISABLED; + } else { + basic.flags = IWLAGN_BT_FLAG_COEX_MODE_3W << + IWLAGN_BT_FLAG_COEX_MODE_SHIFT; + + if (!priv->bt_enable_pspoll) + basic.flags |= IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE; + else + basic.flags &= ~IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE; + + if (priv->bt_ch_announce) + basic.flags |= IWLAGN_BT_FLAG_CHANNEL_INHIBITION; + IWL_DEBUG_COEX(priv, "BT coex flag: 0X%x\n", basic.flags); + } + priv->bt_enable_flag = basic.flags; + if (priv->bt_full_concurrent) + memcpy(basic.bt3_lookup_table, iwlagn_concurrent_lookup, + sizeof(iwlagn_concurrent_lookup)); + else + memcpy(basic.bt3_lookup_table, iwlagn_def_3w_lookup, + sizeof(iwlagn_def_3w_lookup)); + + IWL_DEBUG_COEX(priv, "BT coex %s in %s mode\n", + basic.flags ? "active" : "disabled", + priv->bt_full_concurrent ? + "full concurrency" : "3-wire"); + + if (priv->cfg->bt_params->bt_session_2) { + memcpy(&bt_cmd_v2.basic, &basic, + sizeof(basic)); + ret = iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG, + CMD_SYNC, sizeof(bt_cmd_v2), &bt_cmd_v2); + } else { + memcpy(&bt_cmd_v1.basic, &basic, + sizeof(basic)); + ret = iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG, + CMD_SYNC, sizeof(bt_cmd_v1), &bt_cmd_v1); + } + if (ret) + IWL_ERR(priv, "failed to send BT Coex Config\n"); + +} + +void iwlagn_bt_adjust_rssi_monitor(struct iwl_priv *priv, bool rssi_ena) +{ + struct iwl_rxon_context *ctx, *found_ctx = NULL; + bool found_ap = false; + + lockdep_assert_held(&priv->mutex); + + /* Check whether AP or GO mode is active. */ + if (rssi_ena) { + for_each_context(priv, ctx) { + if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_AP && + iwl_is_associated_ctx(ctx)) { + found_ap = true; + break; + } + } + } + + /* + * If disable was received or If GO/AP mode, disable RSSI + * measurements. + */ + if (!rssi_ena || found_ap) { + if (priv->cur_rssi_ctx) { + ctx = priv->cur_rssi_ctx; + ieee80211_disable_rssi_reports(ctx->vif); + priv->cur_rssi_ctx = NULL; + } + return; + } + + /* + * If rssi measurements need to be enabled, consider all cases now. + * Figure out how many contexts are active. + */ + for_each_context(priv, ctx) { + if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION && + iwl_is_associated_ctx(ctx)) { + found_ctx = ctx; + break; + } + } + + /* + * rssi monitor already enabled for the correct interface...nothing + * to do. + */ + if (found_ctx == priv->cur_rssi_ctx) + return; + + /* + * Figure out if rssi monitor is currently enabled, and needs + * to be changed. If rssi monitor is already enabled, disable + * it first else just enable rssi measurements on the + * interface found above. + */ + if (priv->cur_rssi_ctx) { + ctx = priv->cur_rssi_ctx; + if (ctx->vif) + ieee80211_disable_rssi_reports(ctx->vif); + } + + priv->cur_rssi_ctx = found_ctx; + + if (!found_ctx) + return; + + ieee80211_enable_rssi_reports(found_ctx->vif, + IWLAGN_BT_PSP_MIN_RSSI_THRESHOLD, + IWLAGN_BT_PSP_MAX_RSSI_THRESHOLD); +} + +static bool iwlagn_bt_traffic_is_sco(struct iwl_bt_uart_msg *uart_msg) +{ + return BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3 >> + BT_UART_MSG_FRAME3SCOESCO_POS; +} + +static void iwlagn_bt_traffic_change_work(struct work_struct *work) +{ + struct iwl_priv *priv = + container_of(work, struct iwl_priv, bt_traffic_change_work); + struct iwl_rxon_context *ctx; + int smps_request = -1; + + if (priv->bt_enable_flag == IWLAGN_BT_FLAG_COEX_MODE_DISABLED) { + /* bt coex disabled */ + return; + } + + /* + * Note: bt_traffic_load can be overridden by scan complete and + * coex profile notifications. Ignore that since only bad consequence + * can be not matching debug print with actual state. + */ + IWL_DEBUG_COEX(priv, "BT traffic load changes: %d\n", + priv->bt_traffic_load); + + switch (priv->bt_traffic_load) { + case IWL_BT_COEX_TRAFFIC_LOAD_NONE: + if (priv->bt_status) + smps_request = IEEE80211_SMPS_DYNAMIC; + else + smps_request = IEEE80211_SMPS_AUTOMATIC; + break; + case IWL_BT_COEX_TRAFFIC_LOAD_LOW: + smps_request = IEEE80211_SMPS_DYNAMIC; + break; + case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: + case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: + smps_request = IEEE80211_SMPS_STATIC; + break; + default: + IWL_ERR(priv, "Invalid BT traffic load: %d\n", + priv->bt_traffic_load); + break; + } + + mutex_lock(&priv->mutex); + + /* + * We can not send command to firmware while scanning. When the scan + * complete we will schedule this work again. We do check with mutex + * locked to prevent new scan request to arrive. We do not check + * STATUS_SCANNING to avoid race when queue_work two times from + * different notifications, but quit and not perform any work at all. + */ + if (test_bit(STATUS_SCAN_HW, &priv->status)) + goto out; + + iwl_update_chain_flags(priv); + + if (smps_request != -1) { + priv->current_ht_config.smps = smps_request; + for_each_context(priv, ctx) { + if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION) + ieee80211_request_smps(ctx->vif, smps_request); + } + } + + /* + * Dynamic PS poll related functionality. Adjust RSSI measurements if + * necessary. + */ + iwlagn_bt_coex_rssi_monitor(priv); +out: + mutex_unlock(&priv->mutex); +} + +/* + * If BT sco traffic, and RSSI monitor is enabled, move measurements to the + * correct interface or disable it if this is the last interface to be + * removed. + */ +void iwlagn_bt_coex_rssi_monitor(struct iwl_priv *priv) +{ + if (priv->bt_is_sco && + priv->bt_traffic_load == IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS) + iwlagn_bt_adjust_rssi_monitor(priv, true); + else + iwlagn_bt_adjust_rssi_monitor(priv, false); +} + +static void iwlagn_print_uartmsg(struct iwl_priv *priv, + struct iwl_bt_uart_msg *uart_msg) +{ + IWL_DEBUG_COEX(priv, "Message Type = 0x%X, SSN = 0x%X, " + "Update Req = 0x%X\n", + (BT_UART_MSG_FRAME1MSGTYPE_MSK & uart_msg->frame1) >> + BT_UART_MSG_FRAME1MSGTYPE_POS, + (BT_UART_MSG_FRAME1SSN_MSK & uart_msg->frame1) >> + BT_UART_MSG_FRAME1SSN_POS, + (BT_UART_MSG_FRAME1UPDATEREQ_MSK & uart_msg->frame1) >> + BT_UART_MSG_FRAME1UPDATEREQ_POS); + + IWL_DEBUG_COEX(priv, "Open connections = 0x%X, Traffic load = 0x%X, " + "Chl_SeqN = 0x%X, In band = 0x%X\n", + (BT_UART_MSG_FRAME2OPENCONNECTIONS_MSK & uart_msg->frame2) >> + BT_UART_MSG_FRAME2OPENCONNECTIONS_POS, + (BT_UART_MSG_FRAME2TRAFFICLOAD_MSK & uart_msg->frame2) >> + BT_UART_MSG_FRAME2TRAFFICLOAD_POS, + (BT_UART_MSG_FRAME2CHLSEQN_MSK & uart_msg->frame2) >> + BT_UART_MSG_FRAME2CHLSEQN_POS, + (BT_UART_MSG_FRAME2INBAND_MSK & uart_msg->frame2) >> + BT_UART_MSG_FRAME2INBAND_POS); + + IWL_DEBUG_COEX(priv, "SCO/eSCO = 0x%X, Sniff = 0x%X, A2DP = 0x%X, " + "ACL = 0x%X, Master = 0x%X, OBEX = 0x%X\n", + (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3) >> + BT_UART_MSG_FRAME3SCOESCO_POS, + (BT_UART_MSG_FRAME3SNIFF_MSK & uart_msg->frame3) >> + BT_UART_MSG_FRAME3SNIFF_POS, + (BT_UART_MSG_FRAME3A2DP_MSK & uart_msg->frame3) >> + BT_UART_MSG_FRAME3A2DP_POS, + (BT_UART_MSG_FRAME3ACL_MSK & uart_msg->frame3) >> + BT_UART_MSG_FRAME3ACL_POS, + (BT_UART_MSG_FRAME3MASTER_MSK & uart_msg->frame3) >> + BT_UART_MSG_FRAME3MASTER_POS, + (BT_UART_MSG_FRAME3OBEX_MSK & uart_msg->frame3) >> + BT_UART_MSG_FRAME3OBEX_POS); + + IWL_DEBUG_COEX(priv, "Idle duration = 0x%X\n", + (BT_UART_MSG_FRAME4IDLEDURATION_MSK & uart_msg->frame4) >> + BT_UART_MSG_FRAME4IDLEDURATION_POS); + + IWL_DEBUG_COEX(priv, "Tx Activity = 0x%X, Rx Activity = 0x%X, " + "eSCO Retransmissions = 0x%X\n", + (BT_UART_MSG_FRAME5TXACTIVITY_MSK & uart_msg->frame5) >> + BT_UART_MSG_FRAME5TXACTIVITY_POS, + (BT_UART_MSG_FRAME5RXACTIVITY_MSK & uart_msg->frame5) >> + BT_UART_MSG_FRAME5RXACTIVITY_POS, + (BT_UART_MSG_FRAME5ESCORETRANSMIT_MSK & uart_msg->frame5) >> + BT_UART_MSG_FRAME5ESCORETRANSMIT_POS); + + IWL_DEBUG_COEX(priv, "Sniff Interval = 0x%X, Discoverable = 0x%X\n", + (BT_UART_MSG_FRAME6SNIFFINTERVAL_MSK & uart_msg->frame6) >> + BT_UART_MSG_FRAME6SNIFFINTERVAL_POS, + (BT_UART_MSG_FRAME6DISCOVERABLE_MSK & uart_msg->frame6) >> + BT_UART_MSG_FRAME6DISCOVERABLE_POS); + + IWL_DEBUG_COEX(priv, "Sniff Activity = 0x%X, Page = " + "0x%X, Inquiry = 0x%X, Connectable = 0x%X\n", + (BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK & uart_msg->frame7) >> + BT_UART_MSG_FRAME7SNIFFACTIVITY_POS, + (BT_UART_MSG_FRAME7PAGE_MSK & uart_msg->frame7) >> + BT_UART_MSG_FRAME7PAGE_POS, + (BT_UART_MSG_FRAME7INQUIRY_MSK & uart_msg->frame7) >> + BT_UART_MSG_FRAME7INQUIRY_POS, + (BT_UART_MSG_FRAME7CONNECTABLE_MSK & uart_msg->frame7) >> + BT_UART_MSG_FRAME7CONNECTABLE_POS); +} + +static bool iwlagn_set_kill_msk(struct iwl_priv *priv, + struct iwl_bt_uart_msg *uart_msg) +{ + bool need_update = false; + u8 kill_msk = IWL_BT_KILL_REDUCE; + static const __le32 bt_kill_ack_msg[3] = { + IWLAGN_BT_KILL_ACK_MASK_DEFAULT, + IWLAGN_BT_KILL_ACK_CTS_MASK_SCO, + IWLAGN_BT_KILL_ACK_CTS_MASK_REDUCE}; + static const __le32 bt_kill_cts_msg[3] = { + IWLAGN_BT_KILL_CTS_MASK_DEFAULT, + IWLAGN_BT_KILL_ACK_CTS_MASK_SCO, + IWLAGN_BT_KILL_ACK_CTS_MASK_REDUCE}; + + if (!priv->reduced_txpower) + kill_msk = (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3) + ? IWL_BT_KILL_OVERRIDE : IWL_BT_KILL_DEFAULT; + if (priv->kill_ack_mask != bt_kill_ack_msg[kill_msk] || + priv->kill_cts_mask != bt_kill_cts_msg[kill_msk]) { + priv->bt_valid |= IWLAGN_BT_VALID_KILL_ACK_MASK; + priv->kill_ack_mask = bt_kill_ack_msg[kill_msk]; + priv->bt_valid |= IWLAGN_BT_VALID_KILL_CTS_MASK; + priv->kill_cts_mask = bt_kill_cts_msg[kill_msk]; + need_update = true; + } + return need_update; +} + +/* + * Upon RSSI changes, sends a bt config command with following changes + * 1. enable/disable "reduced control frames tx power + * 2. update the "kill)ack_mask" and "kill_cts_mask" + * + * If "reduced tx power" is enabled, uCode shall + * 1. ACK/Back/CTS rate shall reduced to 6Mbps + * 2. not use duplciate 20/40MHz mode + */ +static bool iwlagn_fill_txpower_mode(struct iwl_priv *priv, + struct iwl_bt_uart_msg *uart_msg) +{ + bool need_update = false; + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + int ave_rssi; + + if (!ctx->vif || (ctx->vif->type != NL80211_IFTYPE_STATION)) { + IWL_DEBUG_INFO(priv, "BSS ctx not active or not in sta mode\n"); + return false; + } + + ave_rssi = ieee80211_ave_rssi(ctx->vif); + if (!ave_rssi) { + /* no rssi data, no changes to reduce tx power */ + IWL_DEBUG_COEX(priv, "no rssi data available\n"); + return need_update; + } + if (!priv->reduced_txpower && + !iwl_is_associated(priv, IWL_RXON_CTX_PAN) && + (ave_rssi > BT_ENABLE_REDUCED_TXPOWER_THRESHOLD) && + (uart_msg->frame3 & (BT_UART_MSG_FRAME3ACL_MSK | + BT_UART_MSG_FRAME3OBEX_MSK)) && + !(uart_msg->frame3 & (BT_UART_MSG_FRAME3SCOESCO_MSK | + BT_UART_MSG_FRAME3SNIFF_MSK | BT_UART_MSG_FRAME3A2DP_MSK))) { + /* enabling reduced tx power */ + priv->reduced_txpower = true; + priv->bt_valid |= IWLAGN_BT_VALID_REDUCED_TX_PWR; + need_update = true; + } else if (priv->reduced_txpower && + (iwl_is_associated(priv, IWL_RXON_CTX_PAN) || + (ave_rssi < BT_DISABLE_REDUCED_TXPOWER_THRESHOLD) || + (uart_msg->frame3 & (BT_UART_MSG_FRAME3SCOESCO_MSK | + BT_UART_MSG_FRAME3SNIFF_MSK | BT_UART_MSG_FRAME3A2DP_MSK)) || + !(uart_msg->frame3 & (BT_UART_MSG_FRAME3ACL_MSK | + BT_UART_MSG_FRAME3OBEX_MSK)))) { + /* disable reduced tx power */ + priv->reduced_txpower = false; + priv->bt_valid |= IWLAGN_BT_VALID_REDUCED_TX_PWR; + need_update = true; + } + + return need_update; +} + +int iwlagn_bt_coex_profile_notif(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_bt_coex_profile_notif *coex = (void *)pkt->data; + struct iwl_bt_uart_msg *uart_msg = &coex->last_bt_uart_msg; + + if (priv->bt_enable_flag == IWLAGN_BT_FLAG_COEX_MODE_DISABLED) { + /* bt coex disabled */ + return 0; + } + + IWL_DEBUG_COEX(priv, "BT Coex notification:\n"); + IWL_DEBUG_COEX(priv, " status: %d\n", coex->bt_status); + IWL_DEBUG_COEX(priv, " traffic load: %d\n", coex->bt_traffic_load); + IWL_DEBUG_COEX(priv, " CI compliance: %d\n", + coex->bt_ci_compliance); + iwlagn_print_uartmsg(priv, uart_msg); + + priv->last_bt_traffic_load = priv->bt_traffic_load; + priv->bt_is_sco = iwlagn_bt_traffic_is_sco(uart_msg); + + if (priv->iw_mode != NL80211_IFTYPE_ADHOC) { + if (priv->bt_status != coex->bt_status || + priv->last_bt_traffic_load != coex->bt_traffic_load) { + if (coex->bt_status) { + /* BT on */ + if (!priv->bt_ch_announce) + priv->bt_traffic_load = + IWL_BT_COEX_TRAFFIC_LOAD_HIGH; + else + priv->bt_traffic_load = + coex->bt_traffic_load; + } else { + /* BT off */ + priv->bt_traffic_load = + IWL_BT_COEX_TRAFFIC_LOAD_NONE; + } + priv->bt_status = coex->bt_status; + queue_work(priv->workqueue, + &priv->bt_traffic_change_work); + } + } + + /* schedule to send runtime bt_config */ + /* check reduce power before change ack/cts kill mask */ + if (iwlagn_fill_txpower_mode(priv, uart_msg) || + iwlagn_set_kill_msk(priv, uart_msg)) + queue_work(priv->workqueue, &priv->bt_runtime_config); + + + /* FIXME: based on notification, adjust the prio_boost */ + + priv->bt_ci_compliance = coex->bt_ci_compliance; + return 0; +} + +void iwlagn_bt_rx_handler_setup(struct iwl_priv *priv) +{ + priv->rx_handlers[REPLY_BT_COEX_PROFILE_NOTIF] = + iwlagn_bt_coex_profile_notif; +} + +void iwlagn_bt_setup_deferred_work(struct iwl_priv *priv) +{ + INIT_WORK(&priv->bt_traffic_change_work, + iwlagn_bt_traffic_change_work); +} + +void iwlagn_bt_cancel_deferred_work(struct iwl_priv *priv) +{ + cancel_work_sync(&priv->bt_traffic_change_work); +} + +static bool is_single_rx_stream(struct iwl_priv *priv) +{ + return priv->current_ht_config.smps == IEEE80211_SMPS_STATIC || + priv->current_ht_config.single_chain_sufficient; +} + +#define IWL_NUM_RX_CHAINS_MULTIPLE 3 +#define IWL_NUM_RX_CHAINS_SINGLE 2 +#define IWL_NUM_IDLE_CHAINS_DUAL 2 +#define IWL_NUM_IDLE_CHAINS_SINGLE 1 + +/* + * Determine how many receiver/antenna chains to use. + * + * More provides better reception via diversity. Fewer saves power + * at the expense of throughput, but only when not in powersave to + * start with. + * + * MIMO (dual stream) requires at least 2, but works better with 3. + * This does not determine *which* chains to use, just how many. + */ +static int iwl_get_active_rx_chain_count(struct iwl_priv *priv) +{ + if (priv->cfg->bt_params && + priv->cfg->bt_params->advanced_bt_coexist && + (priv->bt_full_concurrent || + priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) { + /* + * only use chain 'A' in bt high traffic load or + * full concurrency mode + */ + return IWL_NUM_RX_CHAINS_SINGLE; + } + /* # of Rx chains to use when expecting MIMO. */ + if (is_single_rx_stream(priv)) + return IWL_NUM_RX_CHAINS_SINGLE; + else + return IWL_NUM_RX_CHAINS_MULTIPLE; +} + +/* + * When we are in power saving mode, unless device support spatial + * multiplexing power save, use the active count for rx chain count. + */ +static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) +{ + /* # Rx chains when idling, depending on SMPS mode */ + switch (priv->current_ht_config.smps) { + case IEEE80211_SMPS_STATIC: + case IEEE80211_SMPS_DYNAMIC: + return IWL_NUM_IDLE_CHAINS_SINGLE; + case IEEE80211_SMPS_AUTOMATIC: + case IEEE80211_SMPS_OFF: + return active_cnt; + default: + WARN(1, "invalid SMPS mode %d", + priv->current_ht_config.smps); + return active_cnt; + } +} + +/* up to 4 chains */ +static u8 iwl_count_chain_bitmap(u32 chain_bitmap) +{ + u8 res; + res = (chain_bitmap & BIT(0)) >> 0; + res += (chain_bitmap & BIT(1)) >> 1; + res += (chain_bitmap & BIT(2)) >> 2; + res += (chain_bitmap & BIT(3)) >> 3; + return res; +} + +/** + * iwlagn_set_rxon_chain - Set up Rx chain usage in "staging" RXON image + * + * Selects how many and which Rx receivers/antennas/chains to use. + * This should not be used for scan command ... it puts data in wrong place. + */ +void iwlagn_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx) +{ + bool is_single = is_single_rx_stream(priv); + bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); + u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt; + u32 active_chains; + u16 rx_chain; + + /* Tell uCode which antennas are actually connected. + * Before first association, we assume all antennas are connected. + * Just after first association, iwl_chain_noise_calibration() + * checks which antennas actually *are* connected. */ + if (priv->chain_noise_data.active_chains) + active_chains = priv->chain_noise_data.active_chains; + else + active_chains = priv->eeprom_data->valid_rx_ant; + + if (priv->cfg->bt_params && + priv->cfg->bt_params->advanced_bt_coexist && + (priv->bt_full_concurrent || + priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) { + /* + * only use chain 'A' in bt high traffic load or + * full concurrency mode + */ + active_chains = first_antenna(active_chains); + } + + rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS; + + /* How many receivers should we use? */ + active_rx_cnt = iwl_get_active_rx_chain_count(priv); + idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt); + + + /* correct rx chain count according hw settings + * and chain noise calibration + */ + valid_rx_cnt = iwl_count_chain_bitmap(active_chains); + if (valid_rx_cnt < active_rx_cnt) + active_rx_cnt = valid_rx_cnt; + + if (valid_rx_cnt < idle_rx_cnt) + idle_rx_cnt = valid_rx_cnt; + + rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; + rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; + + ctx->staging.rx_chain = cpu_to_le16(rx_chain); + + if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam) + ctx->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; + else + ctx->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; + + IWL_DEBUG_ASSOC(priv, "rx_chain=0x%X active=%d idle=%d\n", + ctx->staging.rx_chain, + active_rx_cnt, idle_rx_cnt); + + WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 || + active_rx_cnt < idle_rx_cnt); +} + +u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant, u8 valid) +{ + int i; + u8 ind = ant; + + if (priv->band == IEEE80211_BAND_2GHZ && + priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) + return 0; + + for (i = 0; i < RATE_ANT_NUM - 1; i++) { + ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0; + if (valid & BIT(ind)) + return ind; + } + return ant; +} + +#ifdef CONFIG_PM_SLEEP +static void iwlagn_convert_p1k(u16 *p1k, __le16 *out) +{ + int i; + + for (i = 0; i < IWLAGN_P1K_SIZE; i++) + out[i] = cpu_to_le16(p1k[i]); +} + +struct wowlan_key_data { + struct iwl_rxon_context *ctx; + struct iwlagn_wowlan_rsc_tsc_params_cmd *rsc_tsc; + struct iwlagn_wowlan_tkip_params_cmd *tkip; + const u8 *bssid; + bool error, use_rsc_tsc, use_tkip; +}; + + +static void iwlagn_wowlan_program_keys(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key, + void *_data) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + struct wowlan_key_data *data = _data; + struct iwl_rxon_context *ctx = data->ctx; + struct aes_sc *aes_sc, *aes_tx_sc = NULL; + struct tkip_sc *tkip_sc, *tkip_tx_sc = NULL; + struct iwlagn_p1k_cache *rx_p1ks; + u8 *rx_mic_key; + struct ieee80211_key_seq seq; + u32 cur_rx_iv32 = 0; + u16 p1k[IWLAGN_P1K_SIZE]; + int ret, i; + + mutex_lock(&priv->mutex); + + if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 || + key->cipher == WLAN_CIPHER_SUITE_WEP104) && + !sta && !ctx->key_mapping_keys) + ret = iwl_set_default_wep_key(priv, ctx, key); + else + ret = iwl_set_dynamic_key(priv, ctx, key, sta); + + if (ret) { + IWL_ERR(priv, "Error setting key during suspend!\n"); + data->error = true; + } + + switch (key->cipher) { + case WLAN_CIPHER_SUITE_TKIP: + if (sta) { + tkip_sc = data->rsc_tsc->all_tsc_rsc.tkip.unicast_rsc; + tkip_tx_sc = &data->rsc_tsc->all_tsc_rsc.tkip.tsc; + + rx_p1ks = data->tkip->rx_uni; + + ieee80211_get_key_tx_seq(key, &seq); + tkip_tx_sc->iv16 = cpu_to_le16(seq.tkip.iv16); + tkip_tx_sc->iv32 = cpu_to_le32(seq.tkip.iv32); + + ieee80211_get_tkip_p1k_iv(key, seq.tkip.iv32, p1k); + iwlagn_convert_p1k(p1k, data->tkip->tx.p1k); + + memcpy(data->tkip->mic_keys.tx, + &key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY], + IWLAGN_MIC_KEY_SIZE); + + rx_mic_key = data->tkip->mic_keys.rx_unicast; + } else { + tkip_sc = + data->rsc_tsc->all_tsc_rsc.tkip.multicast_rsc; + rx_p1ks = data->tkip->rx_multi; + rx_mic_key = data->tkip->mic_keys.rx_mcast; + } + + /* + * For non-QoS this relies on the fact that both the uCode and + * mac80211 use TID 0 (as they need to to avoid replay attacks) + * for checking the IV in the frames. + */ + for (i = 0; i < IWLAGN_NUM_RSC; i++) { + ieee80211_get_key_rx_seq(key, i, &seq); + tkip_sc[i].iv16 = cpu_to_le16(seq.tkip.iv16); + tkip_sc[i].iv32 = cpu_to_le32(seq.tkip.iv32); + /* wrapping isn't allowed, AP must rekey */ + if (seq.tkip.iv32 > cur_rx_iv32) + cur_rx_iv32 = seq.tkip.iv32; + } + + ieee80211_get_tkip_rx_p1k(key, data->bssid, cur_rx_iv32, p1k); + iwlagn_convert_p1k(p1k, rx_p1ks[0].p1k); + ieee80211_get_tkip_rx_p1k(key, data->bssid, + cur_rx_iv32 + 1, p1k); + iwlagn_convert_p1k(p1k, rx_p1ks[1].p1k); + + memcpy(rx_mic_key, + &key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY], + IWLAGN_MIC_KEY_SIZE); + + data->use_tkip = true; + data->use_rsc_tsc = true; + break; + case WLAN_CIPHER_SUITE_CCMP: + if (sta) { + u8 *pn = seq.ccmp.pn; + + aes_sc = data->rsc_tsc->all_tsc_rsc.aes.unicast_rsc; + aes_tx_sc = &data->rsc_tsc->all_tsc_rsc.aes.tsc; + + ieee80211_get_key_tx_seq(key, &seq); + aes_tx_sc->pn = cpu_to_le64( + (u64)pn[5] | + ((u64)pn[4] << 8) | + ((u64)pn[3] << 16) | + ((u64)pn[2] << 24) | + ((u64)pn[1] << 32) | + ((u64)pn[0] << 40)); + } else + aes_sc = data->rsc_tsc->all_tsc_rsc.aes.multicast_rsc; + + /* + * For non-QoS this relies on the fact that both the uCode and + * mac80211 use TID 0 for checking the IV in the frames. + */ + for (i = 0; i < IWLAGN_NUM_RSC; i++) { + u8 *pn = seq.ccmp.pn; + + ieee80211_get_key_rx_seq(key, i, &seq); + aes_sc->pn = cpu_to_le64( + (u64)pn[5] | + ((u64)pn[4] << 8) | + ((u64)pn[3] << 16) | + ((u64)pn[2] << 24) | + ((u64)pn[1] << 32) | + ((u64)pn[0] << 40)); + } + data->use_rsc_tsc = true; + break; + } + + mutex_unlock(&priv->mutex); +} + +int iwlagn_send_patterns(struct iwl_priv *priv, + struct cfg80211_wowlan *wowlan) +{ + struct iwlagn_wowlan_patterns_cmd *pattern_cmd; + struct iwl_host_cmd cmd = { + .id = REPLY_WOWLAN_PATTERNS, + .dataflags[0] = IWL_HCMD_DFL_NOCOPY, + .flags = CMD_SYNC, + }; + int i, err; + + if (!wowlan->n_patterns) + return 0; + + cmd.len[0] = sizeof(*pattern_cmd) + + wowlan->n_patterns * sizeof(struct iwlagn_wowlan_pattern); + + pattern_cmd = kmalloc(cmd.len[0], GFP_KERNEL); + if (!pattern_cmd) + return -ENOMEM; + + pattern_cmd->n_patterns = cpu_to_le32(wowlan->n_patterns); + + for (i = 0; i < wowlan->n_patterns; i++) { + int mask_len = DIV_ROUND_UP(wowlan->patterns[i].pattern_len, 8); + + memcpy(&pattern_cmd->patterns[i].mask, + wowlan->patterns[i].mask, mask_len); + memcpy(&pattern_cmd->patterns[i].pattern, + wowlan->patterns[i].pattern, + wowlan->patterns[i].pattern_len); + pattern_cmd->patterns[i].mask_size = mask_len; + pattern_cmd->patterns[i].pattern_size = + wowlan->patterns[i].pattern_len; + } + + cmd.data[0] = pattern_cmd; + err = iwl_dvm_send_cmd(priv, &cmd); + kfree(pattern_cmd); + return err; +} + +int iwlagn_suspend(struct iwl_priv *priv, struct cfg80211_wowlan *wowlan) +{ + struct iwlagn_wowlan_wakeup_filter_cmd wakeup_filter_cmd; + struct iwl_rxon_cmd rxon; + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + struct iwlagn_wowlan_kek_kck_material_cmd kek_kck_cmd; + struct iwlagn_wowlan_tkip_params_cmd tkip_cmd = {}; + struct iwlagn_d3_config_cmd d3_cfg_cmd = {}; + struct wowlan_key_data key_data = { + .ctx = ctx, + .bssid = ctx->active.bssid_addr, + .use_rsc_tsc = false, + .tkip = &tkip_cmd, + .use_tkip = false, + }; + int ret, i; + u16 seq; + + key_data.rsc_tsc = kzalloc(sizeof(*key_data.rsc_tsc), GFP_KERNEL); + if (!key_data.rsc_tsc) + return -ENOMEM; + + memset(&wakeup_filter_cmd, 0, sizeof(wakeup_filter_cmd)); + + /* + * We know the last used seqno, and the uCode expects to know that + * one, it will increment before TX. + */ + seq = le16_to_cpu(priv->last_seq_ctl) & IEEE80211_SCTL_SEQ; + wakeup_filter_cmd.non_qos_seq = cpu_to_le16(seq); + + /* + * For QoS counters, we store the one to use next, so subtract 0x10 + * since the uCode will add 0x10 before using the value. + */ + for (i = 0; i < IWL_MAX_TID_COUNT; i++) { + seq = priv->tid_data[IWL_AP_ID][i].seq_number; + seq -= 0x10; + wakeup_filter_cmd.qos_seq[i] = cpu_to_le16(seq); + } + + if (wowlan->disconnect) + wakeup_filter_cmd.enabled |= + cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_BEACON_MISS | + IWLAGN_WOWLAN_WAKEUP_LINK_CHANGE); + if (wowlan->magic_pkt) + wakeup_filter_cmd.enabled |= + cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_MAGIC_PACKET); + if (wowlan->gtk_rekey_failure) + wakeup_filter_cmd.enabled |= + cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_GTK_REKEY_FAIL); + if (wowlan->eap_identity_req) + wakeup_filter_cmd.enabled |= + cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_EAP_IDENT_REQ); + if (wowlan->four_way_handshake) + wakeup_filter_cmd.enabled |= + cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_4WAY_HANDSHAKE); + if (wowlan->n_patterns) + wakeup_filter_cmd.enabled |= + cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_PATTERN_MATCH); + + if (wowlan->rfkill_release) + d3_cfg_cmd.wakeup_flags |= + cpu_to_le32(IWLAGN_D3_WAKEUP_RFKILL); + + iwl_scan_cancel_timeout(priv, 200); + + memcpy(&rxon, &ctx->active, sizeof(rxon)); + + priv->ucode_loaded = false; + iwl_trans_stop_device(priv->trans); + + priv->wowlan = true; + + ret = iwl_load_ucode_wait_alive(priv, IWL_UCODE_WOWLAN); + if (ret) + goto out; + + /* now configure WoWLAN ucode */ + ret = iwl_alive_start(priv); + if (ret) + goto out; + + memcpy(&ctx->staging, &rxon, sizeof(rxon)); + ret = iwlagn_commit_rxon(priv, ctx); + if (ret) + goto out; + + ret = iwl_power_update_mode(priv, true); + if (ret) + goto out; + + if (!iwlwifi_mod_params.sw_crypto) { + /* mark all keys clear */ + priv->ucode_key_table = 0; + ctx->key_mapping_keys = 0; + + /* + * This needs to be unlocked due to lock ordering + * constraints. Since we're in the suspend path + * that isn't really a problem though. + */ + mutex_unlock(&priv->mutex); + ieee80211_iter_keys(priv->hw, ctx->vif, + iwlagn_wowlan_program_keys, + &key_data); + mutex_lock(&priv->mutex); + if (key_data.error) { + ret = -EIO; + goto out; + } + + if (key_data.use_rsc_tsc) { + struct iwl_host_cmd rsc_tsc_cmd = { + .id = REPLY_WOWLAN_TSC_RSC_PARAMS, + .flags = CMD_SYNC, + .data[0] = key_data.rsc_tsc, + .dataflags[0] = IWL_HCMD_DFL_NOCOPY, + .len[0] = sizeof(*key_data.rsc_tsc), + }; + + ret = iwl_dvm_send_cmd(priv, &rsc_tsc_cmd); + if (ret) + goto out; + } + + if (key_data.use_tkip) { + ret = iwl_dvm_send_cmd_pdu(priv, + REPLY_WOWLAN_TKIP_PARAMS, + CMD_SYNC, sizeof(tkip_cmd), + &tkip_cmd); + if (ret) + goto out; + } + + if (priv->have_rekey_data) { + memset(&kek_kck_cmd, 0, sizeof(kek_kck_cmd)); + memcpy(kek_kck_cmd.kck, priv->kck, NL80211_KCK_LEN); + kek_kck_cmd.kck_len = cpu_to_le16(NL80211_KCK_LEN); + memcpy(kek_kck_cmd.kek, priv->kek, NL80211_KEK_LEN); + kek_kck_cmd.kek_len = cpu_to_le16(NL80211_KEK_LEN); + kek_kck_cmd.replay_ctr = priv->replay_ctr; + + ret = iwl_dvm_send_cmd_pdu(priv, + REPLY_WOWLAN_KEK_KCK_MATERIAL, + CMD_SYNC, sizeof(kek_kck_cmd), + &kek_kck_cmd); + if (ret) + goto out; + } + } + + ret = iwl_dvm_send_cmd_pdu(priv, REPLY_D3_CONFIG, CMD_SYNC, + sizeof(d3_cfg_cmd), &d3_cfg_cmd); + if (ret) + goto out; + + ret = iwl_dvm_send_cmd_pdu(priv, REPLY_WOWLAN_WAKEUP_FILTER, + CMD_SYNC, sizeof(wakeup_filter_cmd), + &wakeup_filter_cmd); + if (ret) + goto out; + + ret = iwlagn_send_patterns(priv, wowlan); + out: + kfree(key_data.rsc_tsc); + return ret; +} +#endif + +int iwl_dvm_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) +{ + if (iwl_is_rfkill(priv) || iwl_is_ctkill(priv)) { + IWL_WARN(priv, "Not sending command - %s KILL\n", + iwl_is_rfkill(priv) ? "RF" : "CT"); + return -EIO; + } + + if (test_bit(STATUS_FW_ERROR, &priv->status)) { + IWL_ERR(priv, "Command %s failed: FW Error\n", + iwl_dvm_get_cmd_string(cmd->id)); + return -EIO; + } + + /* + * Synchronous commands from this op-mode must hold + * the mutex, this ensures we don't try to send two + * (or more) synchronous commands at a time. + */ + if (cmd->flags & CMD_SYNC) + lockdep_assert_held(&priv->mutex); + + if (priv->ucode_owner == IWL_OWNERSHIP_TM && + !(cmd->flags & CMD_ON_DEMAND)) { + IWL_DEBUG_HC(priv, "tm own the uCode, no regular hcmd send\n"); + return -EIO; + } + + return iwl_trans_send_cmd(priv->trans, cmd); +} + +int iwl_dvm_send_cmd_pdu(struct iwl_priv *priv, u8 id, + u32 flags, u16 len, const void *data) +{ + struct iwl_host_cmd cmd = { + .id = id, + .len = { len, }, + .data = { data, }, + .flags = flags, + }; + + return iwl_dvm_send_cmd(priv, &cmd); +} |