diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-6000.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-6000.c | 345 |
1 files changed, 335 insertions, 10 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index 9fbf54c..afdeec5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -71,6 +71,10 @@ #define _IWL6000G2A_MODULE_FIRMWARE(api) IWL6000G2A_FW_PRE #api ".ucode" #define IWL6000G2A_MODULE_FIRMWARE(api) _IWL6000G2A_MODULE_FIRMWARE(api) +#define IWL6000G2B_FW_PRE "iwlwifi-6000g2b-" +#define _IWL6000G2B_MODULE_FIRMWARE(api) IWL6000G2B_FW_PRE #api ".ucode" +#define IWL6000G2B_MODULE_FIRMWARE(api) _IWL6000G2B_MODULE_FIRMWARE(api) + static void iwl6000_set_ct_threshold(struct iwl_priv *priv) { @@ -183,6 +187,8 @@ static int iwl6000_hw_set_hw_params(struct iwl_priv *priv) BIT(IWL_CALIB_TX_IQ) | BIT(IWL_CALIB_BASE_BAND); + priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS; + return 0; } @@ -228,37 +234,74 @@ static int iwl6050_hw_set_hw_params(struct iwl_priv *priv) BIT(IWL_CALIB_TX_IQ) | BIT(IWL_CALIB_BASE_BAND); + priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS; + return 0; } -static int iwl6000_hw_channel_switch(struct iwl_priv *priv, u16 channel) +static int iwl6000_hw_channel_switch(struct iwl_priv *priv, + struct ieee80211_channel_switch *ch_switch) { struct iwl6000_channel_switch_cmd cmd; const struct iwl_channel_info *ch_info; + u32 switch_time_in_usec, ucode_switch_time; + u16 ch; + u32 tsf_low; + u8 switch_count; + u16 beacon_interval = le16_to_cpu(priv->rxon_timing.beacon_interval); + struct ieee80211_vif *vif = priv->vif; struct iwl_host_cmd hcmd = { .id = REPLY_CHANNEL_SWITCH, .len = sizeof(cmd), - .flags = CMD_SIZE_HUGE, + .flags = CMD_SYNC, .data = &cmd, }; - IWL_DEBUG_11H(priv, "channel switch from %d to %d\n", - priv->active_rxon.channel, channel); - cmd.band = priv->band == IEEE80211_BAND_2GHZ; - cmd.channel = cpu_to_le16(channel); + ch = ieee80211_frequency_to_channel(ch_switch->channel->center_freq); + IWL_DEBUG_11H(priv, "channel switch from %u to %u\n", + priv->active_rxon.channel, ch); + cmd.channel = cpu_to_le16(ch); cmd.rxon_flags = priv->staging_rxon.flags; cmd.rxon_filter_flags = priv->staging_rxon.filter_flags; - cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); - ch_info = iwl_get_channel_info(priv, priv->band, channel); + switch_count = ch_switch->count; + tsf_low = ch_switch->timestamp & 0x0ffffffff; + /* + * calculate the ucode channel switch time + * adding TSF as one of the factor for when to switch + */ + if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) { + if (switch_count > ((priv->ucode_beacon_time - tsf_low) / + beacon_interval)) { + switch_count -= (priv->ucode_beacon_time - + tsf_low) / beacon_interval; + } else + switch_count = 0; + } + if (switch_count <= 1) + cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); + else { + switch_time_in_usec = + vif->bss_conf.beacon_int * switch_count * TIME_UNIT; + ucode_switch_time = iwl_usecs_to_beacons(priv, + switch_time_in_usec, + beacon_interval); + cmd.switch_time = iwl_add_beacon_time(priv, + priv->ucode_beacon_time, + ucode_switch_time, + beacon_interval); + } + IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", + cmd.switch_time); + ch_info = iwl_get_channel_info(priv, priv->band, ch); if (ch_info) cmd.expect_beacon = is_channel_radar(ch_info); else { IWL_ERR(priv, "invalid channel switch from %u to %u\n", - priv->active_rxon.channel, channel); + priv->active_rxon.channel, ch); return -EFAULT; } - priv->switch_rxon.channel = cpu_to_le16(channel); + priv->switch_rxon.channel = cmd.channel; priv->switch_rxon.switch_in_progress = true; return iwl_send_cmd_sync(priv, &hcmd); @@ -335,6 +378,25 @@ static const struct iwl_ops iwl6000_ops = { .led = &iwlagn_led_ops, }; +static void do_not_send_bt_config(struct iwl_priv *priv) +{ +} + +static struct iwl_hcmd_ops iwl6000g2b_hcmd = { + .rxon_assoc = iwlagn_send_rxon_assoc, + .commit_rxon = iwl_commit_rxon, + .set_rxon_chain = iwl_set_rxon_chain, + .set_tx_ant = iwlagn_send_tx_ant_config, + .send_bt_config = do_not_send_bt_config, +}; + +static const struct iwl_ops iwl6000g2b_ops = { + .lib = &iwl6000_lib, + .hcmd = &iwl6000g2b_hcmd, + .utils = &iwlagn_hcmd_utils, + .led = &iwlagn_led_ops, +}; + static struct iwl_lib_ops iwl6050_lib = { .set_hw_params = iwl6050_hw_set_hw_params, .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl, @@ -445,6 +507,268 @@ struct iwl_cfg iwl6000g2a_2agn_cfg = { .chain_noise_calib_by_driver = true, }; +struct iwl_cfg iwl6000g2a_2abg_cfg = { + .name = "6000 Series 2x2 ABG Gen2a", + .fw_name_pre = IWL6000G2A_FW_PRE, + .ucode_api_max = IWL6000G2_UCODE_API_MAX, + .ucode_api_min = IWL6000G2_UCODE_API_MIN, + .sku = IWL_SKU_A|IWL_SKU_G, + .ops = &iwl6000_ops, + .eeprom_size = OTP_LOW_IMAGE_SIZE, + .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, + .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, + .num_of_queues = IWLAGN_NUM_QUEUES, + .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, + .mod_params = &iwlagn_mod_params, + .valid_tx_ant = ANT_AB, + .valid_rx_ant = ANT_AB, + .pll_cfg_val = 0, + .set_l0s = true, + .use_bsm = false, + .pa_type = IWL_PA_SYSTEM, + .max_ll_items = OTP_MAX_LL_ITEMS_6x00, + .shadow_ram_support = true, + .led_compensation = 51, + .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, + .supports_idle = true, + .adv_thermal_throttle = true, + .support_ct_kill_exit = true, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, + .chain_noise_scale = 1000, + .monitor_recover_period = IWL_MONITORING_PERIOD, + .max_event_log_size = 512, +}; + +struct iwl_cfg iwl6000g2a_2bg_cfg = { + .name = "6000 Series 2x2 BG Gen2a", + .fw_name_pre = IWL6000G2A_FW_PRE, + .ucode_api_max = IWL6000G2_UCODE_API_MAX, + .ucode_api_min = IWL6000G2_UCODE_API_MIN, + .sku = IWL_SKU_G, + .ops = &iwl6000_ops, + .eeprom_size = OTP_LOW_IMAGE_SIZE, + .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, + .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, + .num_of_queues = IWLAGN_NUM_QUEUES, + .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, + .mod_params = &iwlagn_mod_params, + .valid_tx_ant = ANT_AB, + .valid_rx_ant = ANT_AB, + .pll_cfg_val = 0, + .set_l0s = true, + .use_bsm = false, + .pa_type = IWL_PA_SYSTEM, + .max_ll_items = OTP_MAX_LL_ITEMS_6x00, + .shadow_ram_support = true, + .led_compensation = 51, + .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, + .supports_idle = true, + .adv_thermal_throttle = true, + .support_ct_kill_exit = true, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, + .chain_noise_scale = 1000, + .monitor_recover_period = IWL_MONITORING_PERIOD, + .max_event_log_size = 512, +}; + +struct iwl_cfg iwl6000g2b_2agn_cfg = { + .name = "6000 Series 2x2 AGN Gen2b", + .fw_name_pre = IWL6000G2B_FW_PRE, + .ucode_api_max = IWL6000G2_UCODE_API_MAX, + .ucode_api_min = IWL6000G2_UCODE_API_MIN, + .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, + .ops = &iwl6000g2b_ops, + .eeprom_size = OTP_LOW_IMAGE_SIZE, + .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, + .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, + .num_of_queues = IWLAGN_NUM_QUEUES, + .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, + .mod_params = &iwlagn_mod_params, + .valid_tx_ant = ANT_AB, + .valid_rx_ant = ANT_AB, + .pll_cfg_val = 0, + .set_l0s = true, + .use_bsm = false, + .pa_type = IWL_PA_SYSTEM, + .max_ll_items = OTP_MAX_LL_ITEMS_6x00, + .shadow_ram_support = true, + .ht_greenfield_support = true, + .led_compensation = 51, + .use_rts_for_ht = true, /* use rts/cts protection */ + .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, + .supports_idle = true, + .adv_thermal_throttle = true, + .support_ct_kill_exit = true, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, + .chain_noise_scale = 1000, + .monitor_recover_period = IWL_MONITORING_PERIOD, + .max_event_log_size = 512, +}; + +struct iwl_cfg iwl6000g2b_2abg_cfg = { + .name = "6000 Series 2x2 ABG Gen2b", + .fw_name_pre = IWL6000G2B_FW_PRE, + .ucode_api_max = IWL6000G2_UCODE_API_MAX, + .ucode_api_min = IWL6000G2_UCODE_API_MIN, + .sku = IWL_SKU_A|IWL_SKU_G, + .ops = &iwl6000g2b_ops, + .eeprom_size = OTP_LOW_IMAGE_SIZE, + .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, + .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, + .num_of_queues = IWLAGN_NUM_QUEUES, + .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, + .mod_params = &iwlagn_mod_params, + .valid_tx_ant = ANT_AB, + .valid_rx_ant = ANT_AB, + .pll_cfg_val = 0, + .set_l0s = true, + .use_bsm = false, + .pa_type = IWL_PA_SYSTEM, + .max_ll_items = OTP_MAX_LL_ITEMS_6x00, + .shadow_ram_support = true, + .led_compensation = 51, + .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, + .supports_idle = true, + .adv_thermal_throttle = true, + .support_ct_kill_exit = true, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, + .chain_noise_scale = 1000, + .monitor_recover_period = IWL_MONITORING_PERIOD, + .max_event_log_size = 512, +}; + +struct iwl_cfg iwl6000g2b_2bgn_cfg = { + .name = "6000 Series 2x2 BGN Gen2b", + .fw_name_pre = IWL6000G2B_FW_PRE, + .ucode_api_max = IWL6000G2_UCODE_API_MAX, + .ucode_api_min = IWL6000G2_UCODE_API_MIN, + .sku = IWL_SKU_G|IWL_SKU_N, + .ops = &iwl6000g2b_ops, + .eeprom_size = OTP_LOW_IMAGE_SIZE, + .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, + .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, + .num_of_queues = IWLAGN_NUM_QUEUES, + .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, + .mod_params = &iwlagn_mod_params, + .valid_tx_ant = ANT_AB, + .valid_rx_ant = ANT_AB, + .pll_cfg_val = 0, + .set_l0s = true, + .use_bsm = false, + .pa_type = IWL_PA_SYSTEM, + .max_ll_items = OTP_MAX_LL_ITEMS_6x00, + .shadow_ram_support = true, + .ht_greenfield_support = true, + .led_compensation = 51, + .use_rts_for_ht = true, /* use rts/cts protection */ + .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, + .supports_idle = true, + .adv_thermal_throttle = true, + .support_ct_kill_exit = true, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, + .chain_noise_scale = 1000, + .monitor_recover_period = IWL_MONITORING_PERIOD, + .max_event_log_size = 512, +}; + +struct iwl_cfg iwl6000g2b_2bg_cfg = { + .name = "6000 Series 2x2 BG Gen2b", + .fw_name_pre = IWL6000G2B_FW_PRE, + .ucode_api_max = IWL6000G2_UCODE_API_MAX, + .ucode_api_min = IWL6000G2_UCODE_API_MIN, + .sku = IWL_SKU_G, + .ops = &iwl6000g2b_ops, + .eeprom_size = OTP_LOW_IMAGE_SIZE, + .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, + .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, + .num_of_queues = IWLAGN_NUM_QUEUES, + .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, + .mod_params = &iwlagn_mod_params, + .valid_tx_ant = ANT_AB, + .valid_rx_ant = ANT_AB, + .pll_cfg_val = 0, + .set_l0s = true, + .use_bsm = false, + .pa_type = IWL_PA_SYSTEM, + .max_ll_items = OTP_MAX_LL_ITEMS_6x00, + .shadow_ram_support = true, + .led_compensation = 51, + .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, + .supports_idle = true, + .adv_thermal_throttle = true, + .support_ct_kill_exit = true, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, + .chain_noise_scale = 1000, + .monitor_recover_period = IWL_MONITORING_PERIOD, + .max_event_log_size = 512, +}; + +struct iwl_cfg iwl6000g2b_bgn_cfg = { + .name = "6000 Series 1x2 BGN Gen2b", + .fw_name_pre = IWL6000G2B_FW_PRE, + .ucode_api_max = IWL6000G2_UCODE_API_MAX, + .ucode_api_min = IWL6000G2_UCODE_API_MIN, + .sku = IWL_SKU_G|IWL_SKU_N, + .ops = &iwl6000g2b_ops, + .eeprom_size = OTP_LOW_IMAGE_SIZE, + .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, + .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, + .num_of_queues = IWLAGN_NUM_QUEUES, + .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, + .mod_params = &iwlagn_mod_params, + .valid_tx_ant = ANT_A, + .valid_rx_ant = ANT_AB, + .pll_cfg_val = 0, + .set_l0s = true, + .use_bsm = false, + .pa_type = IWL_PA_SYSTEM, + .max_ll_items = OTP_MAX_LL_ITEMS_6x00, + .shadow_ram_support = true, + .ht_greenfield_support = true, + .led_compensation = 51, + .use_rts_for_ht = true, /* use rts/cts protection */ + .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, + .supports_idle = true, + .adv_thermal_throttle = true, + .support_ct_kill_exit = true, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, + .chain_noise_scale = 1000, + .monitor_recover_period = IWL_MONITORING_PERIOD, + .max_event_log_size = 512, +}; + +struct iwl_cfg iwl6000g2b_bg_cfg = { + .name = "6000 Series 1x2 BG Gen2b", + .fw_name_pre = IWL6000G2B_FW_PRE, + .ucode_api_max = IWL6000G2_UCODE_API_MAX, + .ucode_api_min = IWL6000G2_UCODE_API_MIN, + .sku = IWL_SKU_G, + .ops = &iwl6000g2b_ops, + .eeprom_size = OTP_LOW_IMAGE_SIZE, + .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, + .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, + .num_of_queues = IWLAGN_NUM_QUEUES, + .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, + .mod_params = &iwlagn_mod_params, + .valid_tx_ant = ANT_A, + .valid_rx_ant = ANT_AB, + .pll_cfg_val = 0, + .set_l0s = true, + .use_bsm = false, + .pa_type = IWL_PA_SYSTEM, + .max_ll_items = OTP_MAX_LL_ITEMS_6x00, + .shadow_ram_support = true, + .led_compensation = 51, + .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, + .supports_idle = true, + .adv_thermal_throttle = true, + .support_ct_kill_exit = true, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, + .chain_noise_scale = 1000, + .monitor_recover_period = IWL_MONITORING_PERIOD, + .max_event_log_size = 512, +}; + /* * "i": Internal configuration, use internal Power Amplifier */ @@ -667,3 +991,4 @@ struct iwl_cfg iwl6000_3agn_cfg = { MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX)); MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX)); MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX)); +MODULE_FIRMWARE(IWL6000G2B_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX)); |