diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2800pci.c')
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2800pci.c | 192 |
1 files changed, 131 insertions, 61 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index bfc2fc5..8f4dfc3 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -200,11 +200,22 @@ static void rt2800pci_start_queue(struct data_queue *queue) rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); break; case QID_BEACON: + /* + * Allow beacon tasklets to be scheduled for periodic + * beacon updates. + */ + tasklet_enable(&rt2x00dev->tbtt_tasklet); + tasklet_enable(&rt2x00dev->pretbtt_tasklet); + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1); rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); + + rt2800_register_read(rt2x00dev, INT_TIMER_EN, ®); + rt2x00_set_field32(®, INT_TIMER_EN_PRE_TBTT_TIMER, 1); + rt2800_register_write(rt2x00dev, INT_TIMER_EN, reg); break; default: break; @@ -250,6 +261,16 @@ static void rt2800pci_stop_queue(struct data_queue *queue) rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0); rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); + + rt2800_register_read(rt2x00dev, INT_TIMER_EN, ®); + rt2x00_set_field32(®, INT_TIMER_EN_PRE_TBTT_TIMER, 0); + rt2800_register_write(rt2x00dev, INT_TIMER_EN, reg); + + /* + * Wait for tbtt tasklets to finish. + */ + tasklet_disable(&rt2x00dev->tbtt_tasklet); + tasklet_disable(&rt2x00dev->pretbtt_tasklet); break; default: break; @@ -397,9 +418,9 @@ static int rt2800pci_init_queues(struct rt2x00_dev *rt2x00dev) static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev, enum dev_state state) { - int mask = (state == STATE_RADIO_IRQ_ON) || - (state == STATE_RADIO_IRQ_ON_ISR); + int mask = (state == STATE_RADIO_IRQ_ON); u32 reg; + unsigned long flags; /* * When interrupts are being enabled, the interrupt registers @@ -408,8 +429,17 @@ static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev, if (state == STATE_RADIO_IRQ_ON) { rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, ®); rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, reg); + + /* + * Enable tasklets. The beacon related tasklets are + * enabled when the beacon queue is started. + */ + tasklet_enable(&rt2x00dev->txstatus_tasklet); + tasklet_enable(&rt2x00dev->rxdone_tasklet); + tasklet_enable(&rt2x00dev->autowake_tasklet); } + spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags); rt2800_register_read(rt2x00dev, INT_MASK_CSR, ®); rt2x00_set_field32(®, INT_MASK_CSR_RXDELAYINT, 0); rt2x00_set_field32(®, INT_MASK_CSR_TXDELAYINT, 0); @@ -430,6 +460,17 @@ static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, INT_MASK_CSR_RX_COHERENT, 0); rt2x00_set_field32(®, INT_MASK_CSR_TX_COHERENT, 0); rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg); + spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags); + + if (state == STATE_RADIO_IRQ_OFF) { + /* + * Ensure that all tasklets are finished before + * disabling the interrupts. + */ + tasklet_disable(&rt2x00dev->txstatus_tasklet); + tasklet_disable(&rt2x00dev->rxdone_tasklet); + tasklet_disable(&rt2x00dev->autowake_tasklet); + } } static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev) @@ -522,9 +563,7 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev, rt2800pci_set_state(rt2x00dev, STATE_SLEEP); break; case STATE_RADIO_IRQ_ON: - case STATE_RADIO_IRQ_ON_ISR: case STATE_RADIO_IRQ_OFF: - case STATE_RADIO_IRQ_OFF_ISR: rt2800pci_toggle_irq(rt2x00dev, state); break; case STATE_DEEP_SLEEP: @@ -636,6 +675,12 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry, */ rxdesc->flags |= RX_FLAG_IV_STRIPPED; + /* + * The hardware has already checked the Michael Mic and has + * stripped it from the frame. Signal this to mac80211. + */ + rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; + if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) rxdesc->flags |= RX_FLAG_DECRYPTED; else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) @@ -710,45 +755,60 @@ static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev) } } -static void rt2800pci_txstatus_tasklet(unsigned long data) -{ - rt2800pci_txdone((struct rt2x00_dev *)data); -} - -static irqreturn_t rt2800pci_interrupt_thread(int irq, void *dev_instance) +static void rt2800pci_enable_interrupt(struct rt2x00_dev *rt2x00dev, + struct rt2x00_field32 irq_field) { - struct rt2x00_dev *rt2x00dev = dev_instance; - u32 reg = rt2x00dev->irqvalue[0]; + unsigned long flags; + u32 reg; /* - * 1 - Pre TBTT interrupt. + * Enable a single interrupt. The interrupt mask register + * access needs locking. */ - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT)) - rt2x00lib_pretbtt(rt2x00dev); + spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags); + rt2800_register_read(rt2x00dev, INT_MASK_CSR, ®); + rt2x00_set_field32(®, irq_field, 1); + rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg); + spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags); +} - /* - * 2 - Beacondone interrupt. - */ - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TBTT)) - rt2x00lib_beacondone(rt2x00dev); +static void rt2800pci_txstatus_tasklet(unsigned long data) +{ + rt2800pci_txdone((struct rt2x00_dev *)data); /* - * 3 - Rx ring done interrupt. + * No need to enable the tx status interrupt here as we always + * leave it enabled to minimize the possibility of a tx status + * register overflow. See comment in interrupt handler. */ - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE)) - rt2x00pci_rxdone(rt2x00dev); +} - /* - * 4 - Auto wakeup interrupt. - */ - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP)) - rt2800pci_wakeup(rt2x00dev); +static void rt2800pci_pretbtt_tasklet(unsigned long data) +{ + struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; + rt2x00lib_pretbtt(rt2x00dev); + rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_PRE_TBTT); +} - /* Enable interrupts again. */ - rt2x00dev->ops->lib->set_device_state(rt2x00dev, - STATE_RADIO_IRQ_ON_ISR); +static void rt2800pci_tbtt_tasklet(unsigned long data) +{ + struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; + rt2x00lib_beacondone(rt2x00dev); + rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_TBTT); +} - return IRQ_HANDLED; +static void rt2800pci_rxdone_tasklet(unsigned long data) +{ + struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; + rt2x00pci_rxdone(rt2x00dev); + rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RX_DONE); +} + +static void rt2800pci_autowake_tasklet(unsigned long data) +{ + struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; + rt2800pci_wakeup(rt2x00dev); + rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_AUTO_WAKEUP); } static void rt2800pci_txstatus_interrupt(struct rt2x00_dev *rt2x00dev) @@ -794,8 +854,8 @@ static void rt2800pci_txstatus_interrupt(struct rt2x00_dev *rt2x00dev) static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance) { struct rt2x00_dev *rt2x00dev = dev_instance; - u32 reg; - irqreturn_t ret = IRQ_HANDLED; + u32 reg, mask; + unsigned long flags; /* Read status and ACK all interrupts */ rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, ®); @@ -807,38 +867,44 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance) if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) - rt2800pci_txstatus_interrupt(rt2x00dev); + /* + * Since INT_MASK_CSR and INT_SOURCE_CSR use the same bits + * for interrupts and interrupt masks we can just use the value of + * INT_SOURCE_CSR to create the interrupt mask. + */ + mask = ~reg; - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT) || - rt2x00_get_field32(reg, INT_SOURCE_CSR_TBTT) || - rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE) || - rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP)) { + if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) { + rt2800pci_txstatus_interrupt(rt2x00dev); /* - * All other interrupts are handled in the interrupt thread. - * Store irqvalue for use in the interrupt thread. + * Never disable the TX_FIFO_STATUS interrupt. */ - rt2x00dev->irqvalue[0] = reg; + rt2x00_set_field32(&mask, INT_MASK_CSR_TX_FIFO_STATUS, 1); + } - /* - * Disable interrupts, will be enabled again in the - * interrupt thread. - */ - rt2x00dev->ops->lib->set_device_state(rt2x00dev, - STATE_RADIO_IRQ_OFF_ISR); + if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT)) + tasklet_hi_schedule(&rt2x00dev->pretbtt_tasklet); - /* - * Leave the TX_FIFO_STATUS interrupt enabled to not lose any - * tx status reports. - */ - rt2800_register_read(rt2x00dev, INT_MASK_CSR, ®); - rt2x00_set_field32(®, INT_MASK_CSR_TX_FIFO_STATUS, 1); - rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg); + if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TBTT)) + tasklet_hi_schedule(&rt2x00dev->tbtt_tasklet); - ret = IRQ_WAKE_THREAD; - } + if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE)) + tasklet_schedule(&rt2x00dev->rxdone_tasklet); - return ret; + if (rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP)) + tasklet_schedule(&rt2x00dev->autowake_tasklet); + + /* + * Disable all interrupts for which a tasklet was scheduled right now, + * the tasklet will reenable the appropriate interrupts. + */ + spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags); + rt2800_register_read(rt2x00dev, INT_MASK_CSR, ®); + reg &= mask; + rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg); + spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags); + + return IRQ_HANDLED; } /* @@ -953,8 +1019,11 @@ static const struct rt2800_ops rt2800pci_rt2800_ops = { static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { .irq_handler = rt2800pci_interrupt, - .irq_handler_thread = rt2800pci_interrupt_thread, - .txstatus_tasklet = rt2800pci_txstatus_tasklet, + .txstatus_tasklet = rt2800pci_txstatus_tasklet, + .pretbtt_tasklet = rt2800pci_pretbtt_tasklet, + .tbtt_tasklet = rt2800pci_tbtt_tasklet, + .rxdone_tasklet = rt2800pci_rxdone_tasklet, + .autowake_tasklet = rt2800pci_autowake_tasklet, .probe_hw = rt2800pci_probe_hw, .get_firmware_name = rt2800pci_get_firmware_name, .check_firmware = rt2800_check_firmware, @@ -974,6 +1043,7 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { .write_tx_desc = rt2800pci_write_tx_desc, .write_tx_data = rt2800_write_tx_data, .write_beacon = rt2800_write_beacon, + .clear_beacon = rt2800_clear_beacon, .fill_rxdone = rt2800pci_fill_rxdone, .config_shared_key = rt2800_config_shared_key, .config_pairwise_key = rt2800_config_pairwise_key, |