5 files changed, 56 insertions, 18 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 471f87c..5583214 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -692,6 +692,8 @@ enum rt2x00_state_flags {
 	 */
 	CONFIG_CHANNEL_HT40,
 	CONFIG_POWERSAVING,
+	CONFIG_HT_DISABLED,
+	CONFIG_QOS_DISABLED,
 
 	/*
 	 * Mark we currently are sequentially reading TX_STA_FIFO register
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 293676b..e7361d9 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -217,6 +217,11 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
 	libconf.conf = conf;
 
 	if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL) {
+		if (!conf_is_ht(conf))
+			set_bit(CONFIG_HT_DISABLED, &rt2x00dev->flags);
+		else
+			clear_bit(CONFIG_HT_DISABLED, &rt2x00dev->flags);
+
 		if (conf_is_ht40(conf)) {
 			set_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags);
 			hw_value = rt2x00ht_center_channel(rt2x00dev, conf);
diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.c b/drivers/net/wireless/rt2x00/rt2x00leds.c
index ca585e3..8679d78 100644
--- a/drivers/net/wireless/rt2x00/rt2x00leds.c
+++ b/drivers/net/wireless/rt2x00/rt2x00leds.c
@@ -124,17 +124,15 @@ static int rt2x00leds_register_led(struct rt2x00_dev *rt2x00dev,
 
 void rt2x00leds_register(struct rt2x00_dev *rt2x00dev)
 {
-	char dev_name[16];
-	char name[32];
+	char name[36];
 	int retval;
 	unsigned long on_period;
 	unsigned long off_period;
-
-	snprintf(dev_name, sizeof(dev_name), "%s-%s",
-		 rt2x00dev->ops->name, wiphy_name(rt2x00dev->hw->wiphy));
+	const char *phy_name = wiphy_name(rt2x00dev->hw->wiphy);
 
 	if (rt2x00dev->led_radio.flags & LED_INITIALIZED) {
-		snprintf(name, sizeof(name), "%s::radio", dev_name);
+		snprintf(name, sizeof(name), "%s-%s::radio",
+			 rt2x00dev->ops->name, phy_name);
 
 		retval = rt2x00leds_register_led(rt2x00dev,
 						 &rt2x00dev->led_radio,
@@ -144,7 +142,8 @@ void rt2x00leds_register(struct rt2x00_dev *rt2x00dev)
 	}
 
 	if (rt2x00dev->led_assoc.flags & LED_INITIALIZED) {
-		snprintf(name, sizeof(name), "%s::assoc", dev_name);
+		snprintf(name, sizeof(name), "%s-%s::assoc",
+			 rt2x00dev->ops->name, phy_name);
 
 		retval = rt2x00leds_register_led(rt2x00dev,
 						 &rt2x00dev->led_assoc,
@@ -154,7 +153,8 @@ void rt2x00leds_register(struct rt2x00_dev *rt2x00dev)
 	}
 
 	if (rt2x00dev->led_qual.flags & LED_INITIALIZED) {
-		snprintf(name, sizeof(name), "%s::quality", dev_name);
+		snprintf(name, sizeof(name), "%s-%s::quality",
+			 rt2x00dev->ops->name, phy_name);
 
 		retval = rt2x00leds_register_led(rt2x00dev,
 						 &rt2x00dev->led_qual,
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 2df2eb6..b49773e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -709,9 +709,19 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
 			rt2x00dev->intf_associated--;
 
 		rt2x00leds_led_assoc(rt2x00dev, !!rt2x00dev->intf_associated);
+
+		clear_bit(CONFIG_QOS_DISABLED, &rt2x00dev->flags);
 	}
 
 	/*
+	 * Check for access point which do not support 802.11e . We have to
+	 * generate data frames sequence number in S/W for such AP, because
+	 * of H/W bug.
+	 */
+	if (changes & BSS_CHANGED_QOS && !bss_conf->qos)
+		set_bit(CONFIG_QOS_DISABLED, &rt2x00dev->flags);
+
+	/*
 	 * When the erp information has changed, we should perform
 	 * additional configuration steps. For all other changes we are done.
 	 */
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 9b1b2b7..8ecf409 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -213,8 +213,19 @@ static void rt2x00queue_create_tx_descriptor_seq(struct rt2x00_dev *rt2x00dev,
 
 	__set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
 
-	if (!test_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags))
-		return;
+	if (!test_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags)) {
+		/*
+		 * rt2800 has a H/W (or F/W) bug, device incorrectly increase
+		 * seqno on retransmited data (non-QOS) frames. To workaround
+		 * the problem let's generate seqno in software if QOS is
+		 * disabled.
+		 */
+		if (test_bit(CONFIG_QOS_DISABLED, &rt2x00dev->flags))
+			__clear_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
+		else
+			/* H/W will generate sequence number */
+			return;
+	}
 
 	/*
 	 * The hardware is not able to insert a sequence number. Assign a
@@ -320,14 +331,6 @@ static void rt2x00queue_create_tx_descriptor_ht(struct rt2x00_dev *rt2x00dev,
 		txdesc->u.ht.wcid = sta_priv->wcid;
 	}
 
-	txdesc->u.ht.ba_size = 7;	/* FIXME: What value is needed? */
-
-	/*
-	 * Only one STBC stream is supported for now.
-	 */
-	if (tx_info->flags & IEEE80211_TX_CTL_STBC)
-		txdesc->u.ht.stbc = 1;
-
 	/*
 	 * If IEEE80211_TX_RC_MCS is set txrate->idx just contains the
 	 * mcs rate to be used
@@ -351,6 +354,24 @@ static void rt2x00queue_create_tx_descriptor_ht(struct rt2x00_dev *rt2x00dev,
 			txdesc->u.ht.mcs |= 0x08;
 	}
 
+	if (test_bit(CONFIG_HT_DISABLED, &rt2x00dev->flags)) {
+		if (!(tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT))
+			txdesc->u.ht.txop = TXOP_SIFS;
+		else
+			txdesc->u.ht.txop = TXOP_BACKOFF;
+
+		/* Left zero on all other settings. */
+		return;
+	}
+
+	txdesc->u.ht.ba_size = 7;	/* FIXME: What value is needed? */
+
+	/*
+	 * Only one STBC stream is supported for now.
+	 */
+	if (tx_info->flags & IEEE80211_TX_CTL_STBC)
+		txdesc->u.ht.stbc = 1;
+
 	/*
 	 * This frame is eligible for an AMPDU, however, don't aggregate
 	 * frames that are intended to probe a specific tx rate.