diff options
Diffstat (limited to 'drivers/net/wireless')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-agn-rs.h | 28 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-agn-sta.c | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-agn.h | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-commands.h | 591 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-core.c | 1 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-dev.h | 235 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-eeprom.h | 185 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-hcmd.c | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-prph.h | 11 |
9 files changed, 63 insertions, 994 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h index 184828c..b356a39 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h @@ -41,20 +41,6 @@ struct iwl_rate_info { u8 next_rs_tgg; /* next rate used in TGG rs algo */ }; -struct iwl3945_rate_info { - u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */ - u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */ - u8 prev_ieee; /* previous rate in IEEE speeds */ - u8 next_ieee; /* next rate in IEEE speeds */ - u8 prev_rs; /* previous rate used in rs algo */ - u8 next_rs; /* next rate used in rs algo */ - u8 prev_rs_tgg; /* previous rate used in TGG rs algo */ - u8 next_rs_tgg; /* next rate used in TGG rs algo */ - u8 table_rs_index; /* index in rate scale table cmd */ - u8 prev_table_rs; /* prev in rate table cmd */ -}; - - /* * These serve as indexes into * struct iwl_rate_info iwl_rates[IWL_RATE_COUNT]; @@ -75,7 +61,6 @@ enum { IWL_RATE_60M_INDEX, IWL_RATE_COUNT, /*FIXME:RS:change to IWL_RATE_INDEX_COUNT,*/ IWL_RATE_COUNT_LEGACY = IWL_RATE_COUNT - 1, /* Excluding 60M */ - IWL_RATE_COUNT_3945 = IWL_RATE_COUNT - 1, IWL_RATE_INVM_INDEX = IWL_RATE_COUNT, IWL_RATE_INVALID = IWL_RATE_COUNT, }; @@ -213,7 +198,6 @@ enum { IWL_CCK_BASIC_RATES_MASK) #define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1) -#define IWL_RATES_MASK_3945 ((1 << IWL_RATE_COUNT_3945) - 1) #define IWL_INVALID_VALUE -1 @@ -453,19 +437,9 @@ static inline u8 first_antenna(u8 mask) } -/** - * iwl3945_rate_scale_init - Initialize the rate scale table based on assoc info - * - * The specific throughput table used is based on the type of network - * the associated with, including A, B, G, and G w/ TGG protection - */ -extern void iwl3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id); - /* Initialize station's rate scaling information after adding station */ extern void iwl_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_id); -extern void iwl3945_rs_rate_init(struct iwl_priv *priv, - struct ieee80211_sta *sta, u8 sta_id); /** * iwl_rate_control_register - Register the rate control algorithm callbacks @@ -478,7 +452,6 @@ extern void iwl3945_rs_rate_init(struct iwl_priv *priv, * */ extern int iwlagn_rate_control_register(void); -extern int iwl3945_rate_control_register(void); /** * iwl_rate_control_unregister - Unregister the rate control callbacks @@ -487,6 +460,5 @@ extern int iwl3945_rate_control_register(void); * the driver is unloaded. */ extern void iwlagn_rate_control_unregister(void); -extern void iwl3945_rate_control_unregister(void); #endif /* __iwl_agn__rs__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c index 35f085a..3782fe8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c @@ -474,7 +474,7 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, memset(&priv->stations[sta_id].keyinfo, 0, sizeof(struct iwl_hw_key)); memset(&priv->stations[sta_id].sta.key, 0, - sizeof(struct iwl4965_keyinfo)); + sizeof(struct iwl_keyinfo)); priv->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID; priv->stations[sta_id].sta.key.key_offset = WEP_INVALID_OFFSET; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.h b/drivers/net/wireless/iwlwifi/iwl-agn.h index 39313ac..80de8a1 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.h +++ b/drivers/net/wireless/iwlwifi/iwl-agn.h @@ -66,7 +66,6 @@ #include "iwl-dev.h" /* configuration for the _agn devices */ -extern struct iwl_cfg iwl4965_agn_cfg; extern struct iwl_cfg iwl5300_agn_cfg; extern struct iwl_cfg iwl5100_agn_cfg; extern struct iwl_cfg iwl5350_agn_cfg; @@ -114,7 +113,6 @@ extern struct iwl_hcmd_ops iwlagn_bt_hcmd; extern struct iwl_hcmd_utils_ops iwlagn_hcmd_utils; extern struct ieee80211_ops iwlagn_hw_ops; -extern struct ieee80211_ops iwl4965_hw_ops; int iwl_reset_ict(struct iwl_priv *priv); void iwl_disable_ict(struct iwl_priv *priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index cc21514..e6058436 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -103,9 +103,7 @@ enum { REPLY_WEPKEY = 0x20, /* RX, TX, LEDs */ - REPLY_3945_RX = 0x1b, /* 3945 only */ REPLY_TX = 0x1c, - REPLY_RATE_SCALE = 0x47, /* 3945 only */ REPLY_LEDS_CMD = 0x48, REPLY_TX_LINK_QUALITY_CMD = 0x4e, /* for 4965 and up */ @@ -229,7 +227,7 @@ struct iwl_cmd_header { * There is one exception: uCode sets bit 15 when it originates * the response/notification, i.e. when the response/notification * is not a direct response to a command sent by the driver. For - * example, uCode issues REPLY_3945_RX when it sends a received frame + * example, uCode issues REPLY_RX when it sends a received frame * to the driver; it is not a direct response to any driver command. * * The Linux driver uses the following format: @@ -249,36 +247,6 @@ struct iwl_cmd_header { /** - * struct iwl3945_tx_power - * - * Used in REPLY_TX_PWR_TABLE_CMD, REPLY_SCAN_CMD, REPLY_CHANNEL_SWITCH - * - * Each entry contains two values: - * 1) DSP gain (or sometimes called DSP attenuation). This is a fine-grained - * linear value that multiplies the output of the digital signal processor, - * before being sent to the analog radio. - * 2) Radio gain. This sets the analog gain of the radio Tx path. - * It is a coarser setting, and behaves in a logarithmic (dB) fashion. - * - * Driver obtains values from struct iwl3945_tx_power power_gain_table[][]. - */ -struct iwl3945_tx_power { - u8 tx_gain; /* gain for analog radio */ - u8 dsp_atten; /* gain for DSP */ -} __packed; - -/** - * struct iwl3945_power_per_rate - * - * Used in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH - */ -struct iwl3945_power_per_rate { - u8 rate; /* plcp */ - struct iwl3945_tx_power tpc; - u8 reserved; -} __packed; - -/** * iwlagn rate_n_flags bit fields * * rate_n_flags format is used in following iwlagn commands: @@ -377,30 +345,6 @@ struct iwl3945_power_per_rate { #define IWL_PWR_CCK_ENTRIES 2 /** - * union iwl4965_tx_power_dual_stream - * - * Host format used for REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH - * Use __le32 version (struct tx_power_dual_stream) when building command. - * - * Driver provides radio gain and DSP attenuation settings to device in pairs, - * one value for each transmitter chain. The first value is for transmitter A, - * second for transmitter B. - * - * For SISO bit rates, both values in a pair should be identical. - * For MIMO rates, one value may be different from the other, - * in order to balance the Tx output between the two transmitters. - * - * See more details in doc for TXPOWER in iwl-4965-hw.h. - */ -union iwl4965_tx_power_dual_stream { - struct { - u8 radio_tx_gain[2]; - u8 dsp_predis_atten[2]; - } s; - u32 dw; -}; - -/** * struct tx_power_dual_stream * * Table entries in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH @@ -412,15 +356,6 @@ struct tx_power_dual_stream { } __packed; /** - * struct iwl4965_tx_power_db - * - * Entire table within REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH - */ -struct iwl4965_tx_power_db { - struct tx_power_dual_stream power_tbl[POWER_TABLE_NUM_ENTRIES]; -} __packed; - -/** * Command REPLY_TX_POWER_DBM_CMD = 0x98 * struct iwlagn_tx_power_dbm_cmd */ @@ -724,46 +659,6 @@ enum { * regardless of whether RXON_FILTER_ASSOC_MSK is set. */ -struct iwl3945_rxon_cmd { - u8 node_addr[6]; - __le16 reserved1; - u8 bssid_addr[6]; - __le16 reserved2; - u8 wlap_bssid_addr[6]; - __le16 reserved3; - u8 dev_type; - u8 air_propagation; - __le16 reserved4; - u8 ofdm_basic_rates; - u8 cck_basic_rates; - __le16 assoc_id; - __le32 flags; - __le32 filter_flags; - __le16 channel; - __le16 reserved5; -} __packed; - -struct iwl4965_rxon_cmd { - u8 node_addr[6]; - __le16 reserved1; - u8 bssid_addr[6]; - __le16 reserved2; - u8 wlap_bssid_addr[6]; - __le16 reserved3; - u8 dev_type; - u8 air_propagation; - __le16 rx_chain; - u8 ofdm_basic_rates; - u8 cck_basic_rates; - __le16 assoc_id; - __le32 flags; - __le32 filter_flags; - __le16 channel; - u8 ofdm_ht_single_stream_basic_rates; - u8 ofdm_ht_dual_stream_basic_rates; -} __packed; - -/* 5000 HW just extend this command */ struct iwl_rxon_cmd { u8 node_addr[6]; __le16 reserved1; @@ -791,25 +686,6 @@ struct iwl_rxon_cmd { /* * REPLY_RXON_ASSOC = 0x11 (command, has simple generic response) */ -struct iwl3945_rxon_assoc_cmd { - __le32 flags; - __le32 filter_flags; - u8 ofdm_basic_rates; - u8 cck_basic_rates; - __le16 reserved; -} __packed; - -struct iwl4965_rxon_assoc_cmd { - __le32 flags; - __le32 filter_flags; - u8 ofdm_basic_rates; - u8 cck_basic_rates; - u8 ofdm_ht_single_stream_basic_rates; - u8 ofdm_ht_dual_stream_basic_rates; - __le16 rx_chain_select_flags; - __le16 reserved; -} __packed; - struct iwl5000_rxon_assoc_cmd { __le32 flags; __le32 filter_flags; @@ -845,26 +721,6 @@ struct iwl_rxon_time_cmd { /* * REPLY_CHANNEL_SWITCH = 0x72 (command, has simple generic response) */ -struct iwl3945_channel_switch_cmd { - u8 band; - u8 expect_beacon; - __le16 channel; - __le32 rxon_flags; - __le32 rxon_filter_flags; - __le32 switch_time; - struct iwl3945_power_per_rate power[IWL_MAX_RATES]; -} __packed; - -struct iwl4965_channel_switch_cmd { - u8 band; - u8 expect_beacon; - __le16 channel; - __le32 rxon_flags; - __le32 rxon_filter_flags; - __le32 switch_time; - struct iwl4965_tx_power_db tx_power; -} __packed; - /** * struct iwl5000_channel_switch_cmd * @band: 0- 5.2GHz, 1- 2.4GHz @@ -978,15 +834,10 @@ struct iwl_qosparam_cmd { #define IWL_AP_ID 0 #define IWL_AP_ID_PAN 1 #define IWL_STA_ID 2 -#define IWL3945_BROADCAST_ID 24 -#define IWL3945_STATION_COUNT 25 -#define IWL4965_BROADCAST_ID 31 -#define IWL4965_STATION_COUNT 32 #define IWLAGN_PAN_BCAST_ID 14 #define IWLAGN_BROADCAST_ID 15 #define IWLAGN_STATION_COUNT 16 -#define IWL_STATION_COUNT 32 /* MAX(3945,4965)*/ #define IWL_INVALID_STATION 255 #define STA_FLG_TX_RATE_MSK cpu_to_le32(1 << 2) @@ -1034,16 +885,6 @@ struct iwl_qosparam_cmd { * combined with Traffic ID (QOS priority), in format used by Tx Scheduler */ #define BUILD_RAxTID(sta_id, tid) (((sta_id) << 4) + (tid)) -struct iwl4965_keyinfo { - __le16 key_flags; - u8 tkip_rx_tsc_byte2; /* TSC[2] for key mix ph1 detection */ - u8 reserved1; - __le16 tkip_rx_ttak[5]; /* 10-byte unicast TKIP TTAK */ - u8 key_offset; - u8 reserved2; - u8 key[16]; /* 16-byte unicast decryption key */ -} __packed; - /* agn */ struct iwl_keyinfo { __le16 key_flags; @@ -1085,7 +926,6 @@ struct sta_id_modify { * with info on security keys, aggregation parameters, and Tx rates for * initial Tx attempt and any retries (agn devices uses * REPLY_TX_LINK_QUALITY_CMD, - * 3945 uses REPLY_RATE_SCALE to set up rate tables). * * REPLY_ADD_STA sets up the table entry for one station, either creating * a new entry, or modifying a pre-existing one. @@ -1105,72 +945,6 @@ struct sta_id_modify { * entries for all STAs in network, starting with index IWL_STA_ID. */ -struct iwl3945_addsta_cmd { - u8 mode; /* 1: modify existing, 0: add new station */ - u8 reserved[3]; - struct sta_id_modify sta; - struct iwl4965_keyinfo key; - __le32 station_flags; /* STA_FLG_* */ - __le32 station_flags_msk; /* STA_FLG_* */ - - /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID) - * corresponding to bit (e.g. bit 5 controls TID 5). - * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */ - __le16 tid_disable_tx; - - __le16 rate_n_flags; - - /* TID for which to add block-ack support. - * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ - u8 add_immediate_ba_tid; - - /* TID for which to remove block-ack support. - * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */ - u8 remove_immediate_ba_tid; - - /* Starting Sequence Number for added block-ack support. - * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ - __le16 add_immediate_ba_ssn; -} __packed; - -struct iwl4965_addsta_cmd { - u8 mode; /* 1: modify existing, 0: add new station */ - u8 reserved[3]; - struct sta_id_modify sta; - struct iwl4965_keyinfo key; - __le32 station_flags; /* STA_FLG_* */ - __le32 station_flags_msk; /* STA_FLG_* */ - - /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID) - * corresponding to bit (e.g. bit 5 controls TID 5). - * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */ - __le16 tid_disable_tx; - - __le16 reserved1; - - /* TID for which to add block-ack support. - * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ - u8 add_immediate_ba_tid; - - /* TID for which to remove block-ack support. - * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */ - u8 remove_immediate_ba_tid; - - /* Starting Sequence Number for added block-ack support. - * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ - __le16 add_immediate_ba_ssn; - - /* - * Number of packets OK to transmit to station even though - * it is asleep -- used to synchronise PS-poll and u-APSD - * responses while ucode keeps track of STA sleep state. - */ - __le16 sleep_tx_count; - - __le16 reserved2; -} __packed; - -/* agn */ struct iwl_addsta_cmd { u8 mode; /* 1: modify existing, 0: add new station */ u8 reserved[3]; @@ -1339,62 +1113,6 @@ struct iwl_wep_cmd { #define RX_MPDU_RES_STATUS_DEC_DONE_MSK (0x800) -struct iwl3945_rx_frame_stats { - u8 phy_count; - u8 id; - u8 rssi; - u8 agc; - __le16 sig_avg; - __le16 noise_diff; - u8 payload[0]; -} __packed; - -struct iwl3945_rx_frame_hdr { - __le16 channel; - __le16 phy_flags; - u8 reserved1; - u8 rate; - __le16 len; - u8 payload[0]; -} __packed; - -struct iwl3945_rx_frame_end { - __le32 status; - __le64 timestamp; - __le32 beacon_timestamp; -} __packed; - -/* - * REPLY_3945_RX = 0x1b (response only, not a command) - * - * NOTE: DO NOT dereference from casts to this structure - * It is provided only for calculating minimum data set size. - * The actual offsets of the hdr and end are dynamic based on - * stats.phy_count - */ -struct iwl3945_rx_frame { - struct iwl3945_rx_frame_stats stats; - struct iwl3945_rx_frame_hdr hdr; - struct iwl3945_rx_frame_end end; -} __packed; - -#define IWL39_RX_FRAME_SIZE (4 + sizeof(struct iwl3945_rx_frame)) - -/* Fixed (non-configurable) rx data from phy */ - -#define IWL49_RX_RES_PHY_CNT 14 -#define IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET (4) -#define IWL49_RX_PHY_FLAGS_ANTENNAE_MASK (0x70) -#define IWL49_AGC_DB_MASK (0x3f80) /* MASK(7,13) */ -#define IWL49_AGC_DB_POS (7) -struct iwl4965_rx_non_cfg_phy { - __le16 ant_selection; /* ant A bit 4, ant B bit 5, ant C bit 6 */ - __le16 agc_info; /* agc code 0:6, agc dB 7:13, reserved 14:15 */ - u8 rssi_info[6]; /* we use even entries, 0/2/4 for A/B/C rssi */ - u8 pad[0]; -} __packed; - - #define IWLAGN_RX_RES_PHY_CNT 8 #define IWLAGN_RX_RES_AGC_IDX 1 #define IWLAGN_RX_RES_RSSI_AB_IDX 2 @@ -1578,80 +1296,6 @@ struct iwl_rx_mpdu_res_start { * REPLY_TX = 0x1c (command) */ -struct iwl3945_tx_cmd { - /* - * MPDU byte count: - * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size, - * + 8 byte IV for CCM or TKIP (not used for WEP) - * + Data payload - * + 8-byte MIC (not used for CCM/WEP) - * NOTE: Does not include Tx command bytes, post-MAC pad bytes, - * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i - * Range: 14-2342 bytes. - */ - __le16 len; - - /* - * MPDU or MSDU byte count for next frame. - * Used for fragmentation and bursting, but not 11n aggregation. - * Same as "len", but for next frame. Set to 0 if not applicable. - */ - __le16 next_frame_len; - - __le32 tx_flags; /* TX_CMD_FLG_* */ - - u8 rate; - - /* Index of recipient station in uCode's station table */ - u8 sta_id; - u8 tid_tspec; - u8 sec_ctl; - u8 key[16]; - union { - u8 byte[8]; - __le16 word[4]; - __le32 dw[2]; - } tkip_mic; - __le32 next_frame_info; - union { - __le32 life_time; - __le32 attempt; - } stop_time; - u8 supp_rates[2]; - u8 rts_retry_limit; /*byte 50 */ - u8 data_retry_limit; /*byte 51 */ - union { - __le16 pm_frame_timeout; - __le16 attempt_duration; - } timeout; - - /* - * Duration of EDCA burst Tx Opportunity, in 32-usec units. - * Set this if txop time is not specified by HCCA protocol (e.g. by AP). - */ - __le16 driver_txop; - - /* - * MAC header goes here, followed by 2 bytes padding if MAC header - * length is 26 or 30 bytes, followed by payload data - */ - u8 payload[0]; - struct ieee80211_hdr hdr[0]; -} __packed; - -/* - * REPLY_TX = 0x1c (response) - */ -struct iwl3945_tx_resp { - u8 failure_rts; - u8 failure_frame; - u8 bt_kill_count; - u8 rate; - __le32 wireless_media_time; - __le32 status; /* TX status */ -} __packed; - - /* * 4965 uCode updates these Tx attempt count values in host DRAM. * Used for managing Tx retries when expecting block-acks. @@ -1742,54 +1386,6 @@ struct iwl_tx_cmd { struct ieee80211_hdr hdr[0]; } __packed; -/* TX command response is sent after *3945* transmission attempts. - * - * NOTES: - * - * TX_STATUS_FAIL_NEXT_FRAG - * - * If the fragment flag in the MAC header for the frame being transmitted - * is set and there is insufficient time to transmit the next frame, the - * TX status will be returned with 'TX_STATUS_FAIL_NEXT_FRAG'. - * - * TX_STATUS_FIFO_UNDERRUN - * - * Indicates the host did not provide bytes to the FIFO fast enough while - * a TX was in progress. - * - * TX_STATUS_FAIL_MGMNT_ABORT - * - * This status is only possible if the ABORT ON MGMT RX parameter was - * set to true with the TX command. - * - * If the MSB of the status parameter is set then an abort sequence is - * required. This sequence consists of the host activating the TX Abort - * control line, and then waiting for the TX Abort command response. This - * indicates that a the device is no longer in a transmit state, and that the - * command FIFO has been cleared. The host must then deactivate the TX Abort - * control line. Receiving is still allowed in this case. - */ -enum { - TX_3945_STATUS_SUCCESS = 0x01, - TX_3945_STATUS_DIRECT_DONE = 0x02, - TX_3945_STATUS_FAIL_SHORT_LIMIT = 0x82, - TX_3945_STATUS_FAIL_LONG_LIMIT = 0x83, - TX_3945_STATUS_FAIL_FIFO_UNDERRUN = 0x84, - TX_3945_STATUS_FAIL_MGMNT_ABORT = 0x85, - TX_3945_STATUS_FAIL_NEXT_FRAG = 0x86, - TX_3945_STATUS_FAIL_LIFE_EXPIRE = 0x87, - TX_3945_STATUS_FAIL_DEST_PS = 0x88, - TX_3945_STATUS_FAIL_ABORTED = 0x89, - TX_3945_STATUS_FAIL_BT_RETRY = 0x8a, - TX_3945_STATUS_FAIL_STA_INVALID = 0x8b, - TX_3945_STATUS_FAIL_FRAG_DROPPED = 0x8c, - TX_3945_STATUS_FAIL_TID_DISABLE = 0x8d, - TX_3945_STATUS_FAIL_FRAME_FLUSHED = 0x8e, - TX_3945_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f, - TX_3945_STATUS_FAIL_TX_LOCKED = 0x90, - TX_3945_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91, -}; - /* * TX command response is sent after *agn* transmission attempts. * @@ -1907,43 +1503,6 @@ struct agg_tx_status { __le16 sequence; } __packed; -struct iwl4965_tx_resp { - u8 frame_count; /* 1 no aggregation, >1 aggregation */ - u8 bt_kill_count; /* # blocked by bluetooth (unused for agg) */ - u8 failure_rts; /* # failures due to unsuccessful RTS */ - u8 failure_frame; /* # failures due to no ACK (unused for agg) */ - - /* For non-agg: Rate at which frame was successful. - * For agg: Rate at which all frames were transmitted. */ - __le32 rate_n_flags; /* RATE_MCS_* */ - - /* For non-agg: RTS + CTS + frame tx attempts time + ACK. - * For agg: RTS + CTS + aggregation tx time + block-ack time. */ - __le16 wireless_media_time; /* uSecs */ - - __le16 reserved; - __le32 pa_power1; /* RF power amplifier measurement (not used) */ - __le32 pa_power2; - - /* - * For non-agg: frame status TX_STATUS_* - * For agg: status of 1st frame, AGG_TX_STATE_*; other frame status - * fields follow this one, up to frame_count. - * Bit fields: - * 11- 0: AGG_TX_STATE_* status code - * 15-12: Retry count for 1st frame in aggregation (retries - * occur if tx failed for this frame when it was a - * member of a previous aggregation block). If rate - * scaling is used, retry count indicates the rate - * table entry used for all frames in the new agg. - * 31-16: Sequence # for this frame's Tx cmd (not SSN!) - */ - union { - __le32 status; - struct agg_tx_status agg_status[0]; /* for each agg frame */ - } u; -} __packed; - /* * definitions for initial rate index field * bits [3:0] initial rate index @@ -2032,52 +1591,8 @@ struct iwl_compressed_ba_resp { /* * REPLY_TX_PWR_TABLE_CMD = 0x97 (command, has simple generic response) * - * See details under "TXPOWER" in iwl-4965-hw.h. */ -struct iwl3945_txpowertable_cmd { - u8 band; /* 0: 5 GHz, 1: 2.4 GHz */ - u8 reserved; - __le16 channel; - struct iwl3945_power_per_rate power[IWL_MAX_RATES]; -} __packed; - -struct iwl4965_txpowertable_cmd { - u8 band; /* 0: 5 GHz, 1: 2.4 GHz */ - u8 reserved; - __le16 channel; - struct iwl4965_tx_power_db tx_power; -} __packed; - - -/** - * struct iwl3945_rate_scaling_cmd - Rate Scaling Command & Response - * - * REPLY_RATE_SCALE = 0x47 (command, has simple generic response) - * - * NOTE: The table of rates passed to the uCode via the - * RATE_SCALE command sets up the corresponding order of - * rates used for all related commands, including rate - * masks, etc. - * - * For example, if you set 9MB (PLCP 0x0f) as the first - * rate in the rate table, the bit mask for that rate - * when passed through ofdm_basic_rates on the REPLY_RXON - * command would be bit 0 (1 << 0) - */ -struct iwl3945_rate_scaling_info { - __le16 rate_n_flags; - u8 try_cnt; - u8 next_rate_index; -} __packed; - -struct iwl3945_rate_scaling_cmd { - u8 table_id; - u8 reserved[3]; - struct iwl3945_rate_scaling_info table[IWL_MAX_RATES]; -} __packed; - - /*RS_NEW_API: only TLC_RTS remains and moved to bit 0 */ #define LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK (1 << 0) @@ -2698,14 +2213,6 @@ struct iwl_spectrum_notification { #define IWL_POWER_BT_SCO_ENA cpu_to_le16(BIT(8)) #define IWL_POWER_ADVANCE_PM_ENA_MSK cpu_to_le16(BIT(9)) -struct iwl3945_powertable_cmd { - __le16 flags; - u8 reserved[2]; - __le32 rx_data_timeout; - __le32 tx_data_timeout; - __le32 sleep_interval[IWL_POWER_VEC_SIZE]; -} __packed; - struct iwl_powertable_cmd { __le16 flags; u8 keep_alive_seconds; /* 3945 reserved */ @@ -2808,25 +2315,6 @@ struct iwl_ct_kill_throttling_config { * active_dwell < max_out_time */ -/* FIXME: rename to AP1, remove tpc */ -struct iwl3945_scan_channel { - /* - * type is defined as: - * 0:0 1 = active, 0 = passive - * 1:4 SSID direct bit map; if a bit is set, then corresponding - * SSID IE is transmitted in probe request. - * 5:7 reserved - */ - u8 type; - u8 channel; /* band is selected by iwl3945_scan_cmd "flags" field */ - struct iwl3945_tx_power tpc; - __le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */ - __le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */ -} __packed; - -/* set number of direct probes u8 type */ -#define IWL39_SCAN_PROBE_MASK(n) ((BIT(n) | (BIT(n) - BIT(1)))) - struct iwl_scan_channel { /* * type is defined as: @@ -2922,50 +2410,6 @@ struct iwl_ssid_ie { * struct iwl_scan_channel. */ -struct iwl3945_scan_cmd { - __le16 len; - u8 reserved0; - u8 channel_count; /* # channels in channel list */ - __le16 quiet_time; /* dwell only this # millisecs on quiet channel - * (only for active scan) */ - __le16 quiet_plcp_th; /* quiet chnl is < this # pkts (typ. 1) */ - __le16 good_CRC_th; /* passive -> active promotion threshold */ - __le16 reserved1; - __le32 max_out_time; /* max usec to be away from associated (service) - * channel */ - __le32 suspend_time; /* pause scan this long (in "extended beacon - * format") when returning to service channel: - * 3945; 31:24 # beacons, 19:0 additional usec, - * 4965; 31:22 # beacons, 21:0 additional usec. - */ - __le32 flags; /* RXON_FLG_* */ - __le32 filter_flags; /* RXON_FILTER_* */ - - /* For active scans (set to all-0s for passive scans). - * Does not include payload. Must specify Tx rate; no rate scaling. */ - struct iwl3945_tx_cmd tx_cmd; - - /* For directed active scans (set to all-0s otherwise) */ - struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX_3945]; - - /* - * Probe request frame, followed by channel list. - * - * Size of probe request frame is specified by byte count in tx_cmd. - * Channel list follows immediately after probe request frame. - * Number of channels in list is specified by channel_count. - * Each channel in list is of type: - * - * struct iwl3945_scan_channel channels[0]; - * - * NOTE: Only one band of channels can be scanned per pass. You - * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait - * for one scan to complete (i.e. receive SCAN_COMPLETE_NOTIFICATION) - * before requesting another scan. - */ - u8 data[0]; -} __packed; - enum iwl_scan_flags { /* BIT(0) currently unused */ IWL_SCAN_FLAGS_ACTION_FRAME_TX = BIT(1), @@ -3092,20 +2536,6 @@ enum iwl_ibss_manager { * BEACON_NOTIFICATION = 0x90 (notification only, not a command) */ -struct iwl3945_beacon_notif { - struct iwl3945_tx_resp beacon_notify_hdr; - __le32 low_tsf; - __le32 high_tsf; - __le32 ibss_mgr_status; -} __packed; - -struct iwl4965_beacon_notif { - struct iwl4965_tx_resp beacon_notify_hdr; - __le32 low_tsf; - __le32 high_tsf; - __le32 ibss_mgr_status; -} __packed; - struct iwlagn_beacon_notif { struct iwlagn_tx_resp beacon_notify_hdr; __le32 low_tsf; @@ -3117,14 +2547,6 @@ struct iwlagn_beacon_notif { * REPLY_TX_BEACON = 0x91 (command, has simple generic response) */ -struct iwl3945_tx_beacon_cmd { - struct iwl3945_tx_cmd tx; - __le16 tim_idx; - u8 tim_size; - u8 reserved1; - struct ieee80211_hdr frame[0]; /* beacon frame */ -} __packed; - struct iwl_tx_beacon_cmd { struct iwl_tx_cmd tx; __le16 tim_idx; @@ -3473,13 +2895,6 @@ struct iwl_statistics_cmd { #define STATISTICS_REPLY_FLG_BAND_24G_MSK cpu_to_le32(0x2) #define STATISTICS_REPLY_FLG_HT40_MODE_MSK cpu_to_le32(0x8) -struct iwl3945_notif_statistics { - __le32 flag; - struct iwl39_statistics_rx rx; - struct iwl39_statistics_tx tx; - struct iwl39_statistics_general general; -} __packed; - struct iwl_notif_statistics { __le32 flag; struct statistics_rx rx; @@ -4453,10 +3868,6 @@ struct iwl_rx_packet { __le32 len_n_flags; struct iwl_cmd_header hdr; union { - struct iwl3945_rx_frame rx_frame; - struct iwl3945_tx_resp tx_resp; - struct iwl3945_beacon_notif beacon_status; - struct iwl_alive_resp alive_frame; struct iwl_spectrum_notification spectrum_notif; struct iwl_csa_notification csa_notif; diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 6c30fa6..d778f52 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -1430,7 +1430,6 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw, iwl_teardown_interface(priv, vif, false); - memset(priv->bssid, 0, ETH_ALEN); mutex_unlock(&priv->mutex); IWL_DEBUG_MAC80211(priv, "leave\n"); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 1c9d2dd..8dc209a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -26,7 +26,6 @@ /* * Please use this file (iwl-dev.h) for driver implementation definitions. * Please use iwl-commands.h for uCode API definitions. - * Please use iwl-4965-hw.h for hardware-related definitions. */ #ifndef __iwl_dev_h__ @@ -179,53 +178,12 @@ struct iwl_tx_queue { #define IWL_NUM_SCAN_RATES (2) -struct iwl4965_channel_tgd_info { - u8 type; - s8 max_power; -}; - -struct iwl4965_channel_tgh_info { - s64 last_radar_time; -}; - -#define IWL4965_MAX_RATE (33) - -struct iwl3945_clip_group { - /* maximum power level to prevent clipping for each rate, derived by - * us from this band's saturation power in EEPROM */ - const s8 clip_powers[IWL_MAX_RATES]; -}; - -/* current Tx power values to use, one for each rate for each channel. - * requested power is limited by: - * -- regulatory EEPROM limits for this channel - * -- hardware capabilities (clip-powers) - * -- spectrum management - * -- user preference (e.g. iwconfig) - * when requested power is set, base power index must also be set. */ -struct iwl3945_channel_power_info { - struct iwl3945_tx_power tpc; /* actual radio and DSP gain settings */ - s8 power_table_index; /* actual (compenst'd) index into gain table */ - s8 base_power_index; /* gain index for power at factory temp. */ - s8 requested_power; /* power (dBm) requested for this chnl/rate */ -}; - -/* current scan Tx power values to use, one for each scan rate for each - * channel. */ -struct iwl3945_scan_power_info { - struct iwl3945_tx_power tpc; /* actual radio and DSP gain settings */ - s8 power_table_index; /* actual (compenst'd) index into gain table */ - s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */ -}; - /* * One for each channel, holds all channel setup data * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant * with one another! */ struct iwl_channel_info { - struct iwl4965_channel_tgd_info tgd; - struct iwl4965_channel_tgh_info tgh; struct iwl_eeprom_channel eeprom; /* EEPROM regulatory limit */ struct iwl_eeprom_channel ht40_eeprom; /* EEPROM regulatory limit for * HT40 channel */ @@ -245,14 +203,6 @@ struct iwl_channel_info { s8 ht40_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ u8 ht40_flags; /* flags copied from EEPROM */ u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */ - - /* Radio/DSP gain settings for each "normal" data Tx rate. - * These include, in addition to RF and DSP gain, a few fields for - * remembering/modifying gain settings (indexes). */ - struct iwl3945_channel_power_info power_info[IWL4965_MAX_RATE]; - - /* Radio/DSP gain settings for each scan rate, for directed scans. */ - struct iwl3945_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES]; }; #define IWL_TX_FIFO_BK 0 /* shared */ @@ -501,9 +451,6 @@ struct iwl_station_priv_common { * When mac80211 creates a station it reserves some space (hw->sta_data_size) * in the structure for use by driver. This structure is places in that * space. - * - * The common struct MUST be first because it is shared between - * 3945 and agn! */ struct iwl_station_priv { struct iwl_station_priv_common common; @@ -621,14 +568,6 @@ struct iwl_tlv_ucode_header { u8 data[0]; }; -struct iwl4965_ibss_seq { - u8 mac[ETH_ALEN]; - u16 seq_num; - u16 frag_num; - unsigned long packet_time; - struct list_head list; -}; - struct iwl_sensitivity_ranges { u16 min_nrg_cck; u16 max_nrg_cck; @@ -724,8 +663,6 @@ struct iwl_hw_params { * Naming convention -- * iwl_ <-- Is part of iwlwifi * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX) - * iwl4965_bg_ <-- Called from work queue context - * iwl4965_mac_ <-- mac80211 callback * ****************************************************************************/ extern void iwl_update_chain_flags(struct iwl_priv *priv); @@ -774,7 +711,6 @@ struct iwl_dma_ptr { /* Sensitivity and chain noise calibration */ #define INITIALIZATION_VALUE 0xFFFF -#define IWL4965_CAL_NUM_BEACONS 20 #define IWL_CAL_NUM_BEACONS 16 #define MAXIMUM_ALLOWED_PATHLOSS 15 @@ -808,24 +744,19 @@ struct iwl_dma_ptr { #define NRG_NUM_PREV_STAT_L 20 #define NUM_RX_CHAINS 3 -enum iwl4965_false_alarm_state { +enum iwlagn_false_alarm_state { IWL_FA_TOO_MANY = 0, IWL_FA_TOO_FEW = 1, IWL_FA_GOOD_RANGE = 2, }; -enum iwl4965_chain_noise_state { +enum iwlagn_chain_noise_state { IWL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */ IWL_CHAIN_NOISE_ACCUMULATE, IWL_CHAIN_NOISE_CALIBRATED, IWL_CHAIN_NOISE_DONE, }; -enum iwl4965_calib_enabled_state { - IWL_CALIB_DISABLED = 0, /* must be 0 */ - IWL_CALIB_ENABLED = 1, -}; - /* * enum iwl_calib @@ -1133,12 +1064,6 @@ struct iwl_force_reset { /* extend beacon time format bit shifting */ /* - * for _3945 devices - * bits 31:24 - extended - * bits 23:0 - interval - */ -#define IWL3945_EXT_BEACON_TIME_POS 24 -/* * for _agn devices * bits 31:22 - extended * bits 21:0 - interval @@ -1391,15 +1316,12 @@ struct iwl_priv { struct iwl_power_mgr power_data; struct iwl_tt_mgmt thermal_throttle; - /* context information */ - u8 bssid[ETH_ALEN]; /* used only on 3945 but filled by core */ - /* station table variables */ /* Note: if lock and sta_lock are needed, lock must be acquired first */ spinlock_t sta_lock; int num_stations; - struct iwl_station_entry stations[IWL_STATION_COUNT]; + struct iwl_station_entry stations[IWLAGN_STATION_COUNT]; unsigned long ucode_key_table; /* queue refcounts */ @@ -1423,101 +1345,66 @@ struct iwl_priv { /* Last Rx'd beacon timestamp */ u64 timestamp; - union { -#if defined(CONFIG_IWL3945) || defined(CONFIG_IWL3945_MODULE) - struct { - void *shared_virt; - dma_addr_t shared_phys; - - struct delayed_work thermal_periodic; - struct delayed_work rfkill_poll; - - struct iwl3945_notif_statistics statistics; -#ifdef CONFIG_IWLWIFI_DEBUGFS - struct iwl3945_notif_statistics accum_statistics; - struct iwl3945_notif_statistics delta_statistics; - struct iwl3945_notif_statistics max_delta; -#endif - - u32 sta_supp_rates; - int last_rx_rssi; /* From Rx packet statistics */ - - /* Rx'd packet timing information */ - u32 last_beacon_time; - u64 last_tsf; - - /* - * each calibration channel group in the - * EEPROM has a derived clip setting for - * each rate. - */ - const struct iwl3945_clip_group clip_groups[5]; - - } _3945; -#endif -#if defined(CONFIG_IWLAGN) || defined(CONFIG_IWLAGN_MODULE) - struct { - /* INT ICT Table */ - __le32 *ict_tbl; - void *ict_tbl_vir; - dma_addr_t ict_tbl_dma; - dma_addr_t aligned_ict_tbl_dma; - int ict_index; - u32 inta; - bool use_ict; - /* - * reporting the number of tids has AGG on. 0 means - * no AGGREGATION - */ - u8 agg_tids_count; - - struct iwl_rx_phy_res last_phy_res; - bool last_phy_res_valid; - - struct completion firmware_loading_complete; - - u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr; - u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr; - - /* - * chain noise reset and gain commands are the - * two extra calibration commands follows the standard - * phy calibration commands - */ - u8 phy_calib_chain_noise_reset_cmd; - u8 phy_calib_chain_noise_gain_cmd; - - struct iwl_notif_statistics statistics; - struct iwl_bt_notif_statistics statistics_bt; - /* counts reply_tx error */ - struct reply_tx_error_statistics reply_tx_stats; - struct reply_agg_tx_error_statistics reply_agg_tx_stats; + struct { + /* INT ICT Table */ + __le32 *ict_tbl; + void *ict_tbl_vir; + dma_addr_t ict_tbl_dma; + dma_addr_t aligned_ict_tbl_dma; + int ict_index; + u32 inta; + bool use_ict; + /* + * reporting the number of tids has AGG on. 0 means + * no AGGREGATION + */ + u8 agg_tids_count; + + struct iwl_rx_phy_res last_phy_res; + bool last_phy_res_valid; + + struct completion firmware_loading_complete; + + u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr; + u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr; + + /* + * chain noise reset and gain commands are the + * two extra calibration commands follows the standard + * phy calibration commands + */ + u8 phy_calib_chain_noise_reset_cmd; + u8 phy_calib_chain_noise_gain_cmd; + + struct iwl_notif_statistics statistics; + struct iwl_bt_notif_statistics statistics_bt; + /* counts reply_tx error */ + struct reply_tx_error_statistics reply_tx_stats; + struct reply_agg_tx_error_statistics reply_agg_tx_stats; #ifdef CONFIG_IWLWIFI_DEBUGFS - struct iwl_notif_statistics accum_statistics; - struct iwl_notif_statistics delta_statistics; - struct iwl_notif_statistics max_delta; - struct iwl_bt_notif_statistics accum_statistics_bt; - struct iwl_bt_notif_statistics delta_statistics_bt; - struct iwl_bt_notif_statistics max_delta_bt; -#endif - - /* notification wait support */ - struct list_head notif_waits; - spinlock_t notif_wait_lock; - wait_queue_head_t notif_waitq; - - /* remain-on-channel offload support */ - struct ieee80211_channel *hw_roc_channel; - struct delayed_work hw_roc_work; - enum nl80211_channel_type hw_roc_chantype; - int hw_roc_duration; - - struct sk_buff *offchan_tx_skb; - int offchan_tx_timeout; - struct ieee80211_channel *offchan_tx_chan; - } _agn; + struct iwl_notif_statistics accum_statistics; + struct iwl_notif_statistics delta_statistics; + struct iwl_notif_statistics max_delta; + struct iwl_bt_notif_statistics accum_statistics_bt; + struct iwl_bt_notif_statistics delta_statistics_bt; + struct iwl_bt_notif_statistics max_delta_bt; #endif - }; + /* notification wait support */ + struct list_head notif_waits; + spinlock_t notif_wait_lock; + wait_queue_head_t notif_waitq; + + /* remain-on-channel offload support */ + struct ieee80211_channel *hw_roc_channel; + struct delayed_work hw_roc_work; + enum nl80211_channel_type hw_roc_chantype; + int hw_roc_duration; + bool hw_roc_setup; + + struct sk_buff *offchan_tx_skb; + int offchan_tx_timeout; + struct ieee80211_channel *offchan_tx_chan; + } _agn; /* bt coex */ u8 bt_enable_flag; diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h index 98aa8af..d0f858a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h @@ -110,10 +110,6 @@ enum { }; /* SKU Capabilities */ -/* 3945 only */ -#define EEPROM_SKU_CAP_SW_RF_KILL_ENABLE (1 << 0) -#define EEPROM_SKU_CAP_HW_RF_KILL_ENABLE (1 << 1) - /* 5000 and up */ #define EEPROM_SKU_CAP_BAND_POS (4) #define EEPROM_SKU_CAP_BAND_SELECTION \ @@ -168,28 +164,6 @@ struct iwl_eeprom_enhanced_txpwr { s8 mimo3_max; } __packed; -/* 3945 Specific */ -#define EEPROM_3945_EEPROM_VERSION (0x2f) - -/* 4965 has two radio transmitters (and 3 radio receivers) */ -#define EEPROM_TX_POWER_TX_CHAINS (2) - -/* 4965 has room for up to 8 sets of txpower calibration data */ -#define EEPROM_TX_POWER_BANDS (8) - -/* 4965 factory calibration measures txpower gain settings for - * each of 3 target output levels */ -#define EEPROM_TX_POWER_MEASUREMENTS (3) - -/* 4965 Specific */ -/* 4965 driver does not work with txpower calibration version < 5 */ -#define EEPROM_4965_TX_POWER_VERSION (5) -#define EEPROM_4965_EEPROM_VERSION (0x2f) -#define EEPROM_4965_CALIB_VERSION_OFFSET (2*0xB6) /* 2 bytes */ -#define EEPROM_4965_CALIB_TXPOWER_OFFSET (2*0xE8) /* 48 bytes */ -#define EEPROM_4965_BOARD_REVISION (2*0x4F) /* 2 bytes */ -#define EEPROM_4965_BOARD_PBA (2*0x56+1) /* 9 bytes */ - /* 5000 Specific */ #define EEPROM_5000_TX_POWER_VERSION (4) #define EEPROM_5000_EEPROM_VERSION (0x11A) @@ -282,90 +256,6 @@ struct iwl_eeprom_enhanced_txpwr { /* 2.4 GHz */ extern const u8 iwl_eeprom_band_1[14]; -/* - * factory calibration data for one txpower level, on one channel, - * measured on one of the 2 tx chains (radio transmitter and associated - * antenna). EEPROM contains: - * - * 1) Temperature (degrees Celsius) of device when measurement was made. - * - * 2) Gain table index used to achieve the target measurement power. - * This refers to the "well-known" gain tables (see iwl-4965-hw.h). - * - * 3) Actual measured output power, in half-dBm ("34" = 17 dBm). - * - * 4) RF power amplifier detector level measurement (not used). - */ -struct iwl_eeprom_calib_measure { - u8 temperature; /* Device temperature (Celsius) */ - u8 gain_idx; /* Index into gain table */ - u8 actual_pow; /* Measured RF output power, half-dBm */ - s8 pa_det; /* Power amp detector level (not used) */ -} __packed; - - -/* - * measurement set for one channel. EEPROM contains: - * - * 1) Channel number measured - * - * 2) Measurements for each of 3 power levels for each of 2 radio transmitters - * (a.k.a. "tx chains") (6 measurements altogether) - */ -struct iwl_eeprom_calib_ch_info { - u8 ch_num; - struct iwl_eeprom_calib_measure - measurements[EEPROM_TX_POWER_TX_CHAINS] - [EEPROM_TX_POWER_MEASUREMENTS]; -} __packed; - -/* - * txpower subband info. - * - * For each frequency subband, EEPROM contains the following: - * - * 1) First and last channels within range of the subband. "0" values - * indicate that this sample set is not being used. - * - * 2) Sample measurement sets for 2 channels close to the range endpoints. - */ -struct iwl_eeprom_calib_subband_info { - u8 ch_from; /* channel number of lowest channel in subband */ - u8 ch_to; /* channel number of highest channel in subband */ - struct iwl_eeprom_calib_ch_info ch1; - struct iwl_eeprom_calib_ch_info ch2; -} __packed; - - -/* - * txpower calibration info. EEPROM contains: - * - * 1) Factory-measured saturation power levels (maximum levels at which - * tx power amplifier can output a signal without too much distortion). - * There is one level for 2.4 GHz band and one for 5 GHz band. These - * values apply to all channels within each of the bands. - * - * 2) Factory-measured power supply voltage level. This is assumed to be - * constant (i.e. same value applies to all channels/bands) while the - * factory measurements are being made. - * - * 3) Up to 8 sets of factory-measured txpower calibration values. - * These are for different frequency ranges, since txpower gain - * characteristics of the analog radio circuitry vary with frequency. - * - * Not all sets need to be filled with data; - * struct iwl_eeprom_calib_subband_info contains range of channels - * (0 if unused) for each set of data. - */ -struct iwl_eeprom_calib_info { - u8 saturation_power24; /* half-dBm (e.g. "34" = 17 dBm) */ - u8 saturation_power52; /* half-dBm */ - __le16 voltage; /* signed */ - struct iwl_eeprom_calib_subband_info - band_info[EEPROM_TX_POWER_BANDS]; -} __packed; - - #define ADDRESS_MSK 0x0000FFFF #define INDIRECT_TYPE_MSK 0x000F0000 #define INDIRECT_HOST 0x00010000 @@ -398,83 +288,8 @@ struct iwl_eeprom_calib_info { #define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */ #define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */ -#define EEPROM_3945_RF_CFG_TYPE_MAX 0x0 -#define EEPROM_4965_RF_CFG_TYPE_MAX 0x1 - -/* Radio Config for 5000 and up */ -#define EEPROM_RF_CONFIG_TYPE_R3x3 0x0 -#define EEPROM_RF_CONFIG_TYPE_R2x2 0x1 -#define EEPROM_RF_CONFIG_TYPE_R1x2 0x2 #define EEPROM_RF_CONFIG_TYPE_MAX 0x3 -/* - * Per-channel regulatory data. - * - * Each channel that *might* be supported by iwl has a fixed location - * in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory - * txpower (MSB). - * - * Entries immediately below are for 20 MHz channel width. HT40 (40 MHz) - * channels (only for 4965, not supported by 3945) appear later in the EEPROM. - * - * 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 - */ -#define EEPROM_REGULATORY_SKU_ID (2*0x60) /* 4 bytes */ -#define EEPROM_REGULATORY_BAND_1 (2*0x62) /* 2 bytes */ -#define EEPROM_REGULATORY_BAND_1_CHANNELS (2*0x63) /* 28 bytes */ - -/* - * 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196, - * 5.0 GHz channels 7, 8, 11, 12, 16 - * (4915-5080MHz) (none of these is ever supported) - */ -#define EEPROM_REGULATORY_BAND_2 (2*0x71) /* 2 bytes */ -#define EEPROM_REGULATORY_BAND_2_CHANNELS (2*0x72) /* 26 bytes */ - -/* - * 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 - * (5170-5320MHz) - */ -#define EEPROM_REGULATORY_BAND_3 (2*0x7F) /* 2 bytes */ -#define EEPROM_REGULATORY_BAND_3_CHANNELS (2*0x80) /* 24 bytes */ - -/* - * 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 - * (5500-5700MHz) - */ -#define EEPROM_REGULATORY_BAND_4 (2*0x8C) /* 2 bytes */ -#define EEPROM_REGULATORY_BAND_4_CHANNELS (2*0x8D) /* 22 bytes */ - -/* - * 5.7 GHz channels 145, 149, 153, 157, 161, 165 - * (5725-5825MHz) - */ -#define EEPROM_REGULATORY_BAND_5 (2*0x98) /* 2 bytes */ -#define EEPROM_REGULATORY_BAND_5_CHANNELS (2*0x99) /* 12 bytes */ - -/* - * 2.4 GHz HT40 channels 1 (5), 2 (6), 3 (7), 4 (8), 5 (9), 6 (10), 7 (11) - * - * The channel listed is the center of the lower 20 MHz half of the channel. - * The overall center frequency is actually 2 channels (10 MHz) above that, - * and the upper half of each HT40 channel is centered 4 channels (20 MHz) away - * from the lower half; e.g. the upper half of HT40 channel 1 is channel 5, - * and the overall HT40 channel width centers on channel 3. - * - * NOTE: The RXON command uses 20 MHz channel numbers to specify the - * control channel to which to tune. RXON also specifies whether the - * control channel is the upper or lower half of a HT40 channel. - * - * NOTE: 4965 does not support HT40 channels on 2.4 GHz. - */ -#define EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS (2*0xA0) /* 14 bytes */ - -/* - * 5.2 GHz HT40 channels 36 (40), 44 (48), 52 (56), 60 (64), - * 100 (104), 108 (112), 116 (120), 124 (128), 132 (136), 149 (153), 157 (161) - */ -#define EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS (2*0xA8) /* 22 bytes */ - #define EEPROM_REGULATORY_BAND_NO_HT40 (0) struct iwl_eeprom_ops { diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c index c71c0a4..165e756 100644 --- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c @@ -51,9 +51,7 @@ const char *get_cmd_string(u8 cmd) IWL_CMD(REPLY_REMOVE_ALL_STA); IWL_CMD(REPLY_TXFIFO_FLUSH); IWL_CMD(REPLY_WEPKEY); - IWL_CMD(REPLY_3945_RX); IWL_CMD(REPLY_TX); - IWL_CMD(REPLY_RATE_SCALE); IWL_CMD(REPLY_LEDS_CMD); IWL_CMD(REPLY_TX_LINK_QUALITY_CMD); IWL_CMD(COEX_PRIORITY_TABLE_CMD); diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index 86f5123..81c4647 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -91,7 +91,6 @@ #define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000) #define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000) #define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000) -#define APMG_PS_CTRL_VAL_PWR_SRC_MAX (0x01000000) /* 3945 only */ #define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000) #define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK (0x000001E0) /* bit 8:5 */ #define APMG_SVR_DIGITAL_VOLTAGE_1_32 (0x00000060) @@ -234,16 +233,6 @@ #define BSM_SRAM_SIZE (1024) /* bytes */ -/* 3945 Tx scheduler registers */ -#define ALM_SCD_BASE (PRPH_BASE + 0x2E00) -#define ALM_SCD_MODE_REG (ALM_SCD_BASE + 0x000) -#define ALM_SCD_ARASTAT_REG (ALM_SCD_BASE + 0x004) -#define ALM_SCD_TXFACT_REG (ALM_SCD_BASE + 0x010) -#define ALM_SCD_TXF4MF_REG (ALM_SCD_BASE + 0x014) -#define ALM_SCD_TXF5MF_REG (ALM_SCD_BASE + 0x020) -#define ALM_SCD_SBYP_MODE_1_REG (ALM_SCD_BASE + 0x02C) -#define ALM_SCD_SBYP_MODE_2_REG (ALM_SCD_BASE + 0x030) - /** * Tx Scheduler * |