summaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/bnx2x/bnx2x_link.c467
-rw-r--r--drivers/net/bnx2x/bnx2x_reg.h12
2 files changed, 471 insertions, 8 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index b777d2c..73938f9 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -134,6 +134,9 @@
#define LINK_10GXFD LINK_STATUS_SPEED_AND_DUPLEX_10GXFD
#define LINK_20GTFD LINK_STATUS_SPEED_AND_DUPLEX_20GTFD
#define LINK_20GXFD LINK_STATUS_SPEED_AND_DUPLEX_20GXFD
+
+
+
/* */
#define SFP_EEPROM_CON_TYPE_ADDR 0x2
#define SFP_EEPROM_CON_TYPE_VAL_LC 0x7
@@ -2060,6 +2063,83 @@ static u32 bnx2x_get_emac_base(struct bnx2x *bp,
}
/******************************************************************/
+/* CL22 access functions */
+/******************************************************************/
+static int bnx2x_cl22_write(struct bnx2x *bp,
+ struct bnx2x_phy *phy,
+ u16 reg, u16 val)
+{
+ u32 tmp, mode;
+ u8 i;
+ int rc = 0;
+ /* Switch to CL22 */
+ mode = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+ REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE,
+ mode & ~EMAC_MDIO_MODE_CLAUSE_45);
+
+ /* address */
+ tmp = ((phy->addr << 21) | (reg << 16) | val |
+ EMAC_MDIO_COMM_COMMAND_WRITE_22 |
+ EMAC_MDIO_COMM_START_BUSY);
+ REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
+
+ for (i = 0; i < 50; i++) {
+ udelay(10);
+
+ tmp = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
+ if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
+ udelay(5);
+ break;
+ }
+ }
+ if (tmp & EMAC_MDIO_COMM_START_BUSY) {
+ DP(NETIF_MSG_LINK, "write phy register failed\n");
+ rc = -EFAULT;
+ }
+ REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, mode);
+ return rc;
+}
+
+static int bnx2x_cl22_read(struct bnx2x *bp,
+ struct bnx2x_phy *phy,
+ u16 reg, u16 *ret_val)
+{
+ u32 val, mode;
+ u16 i;
+ int rc = 0;
+
+ /* Switch to CL22 */
+ mode = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+ REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE,
+ mode & ~EMAC_MDIO_MODE_CLAUSE_45);
+
+ /* address */
+ val = ((phy->addr << 21) | (reg << 16) |
+ EMAC_MDIO_COMM_COMMAND_READ_22 |
+ EMAC_MDIO_COMM_START_BUSY);
+ REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
+
+ for (i = 0; i < 50; i++) {
+ udelay(10);
+
+ val = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
+ if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
+ *ret_val = (u16)(val & EMAC_MDIO_COMM_DATA);
+ udelay(5);
+ break;
+ }
+ }
+ if (val & EMAC_MDIO_COMM_START_BUSY) {
+ DP(NETIF_MSG_LINK, "read phy register failed\n");
+
+ *ret_val = 0;
+ rc = -EFAULT;
+ }
+ REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, mode);
+ return rc;
+}
+
+/******************************************************************/
/* CL45 access functions */
/******************************************************************/
static int bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy,
@@ -2649,12 +2729,19 @@ static u8 bnx2x_ext_phy_resolve_fc(struct bnx2x_phy *phy,
vars->flow_ctrl = params->req_fc_auto_adv;
else if (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) {
ret = 1;
- bnx2x_cl45_read(bp, phy,
- MDIO_AN_DEVAD,
- MDIO_AN_REG_ADV_PAUSE, &ld_pause);
- bnx2x_cl45_read(bp, phy,
- MDIO_AN_DEVAD,
- MDIO_AN_REG_LP_AUTO_NEG, &lp_pause);
+ if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54616) {
+ bnx2x_cl22_read(bp, phy,
+ 0x4, &ld_pause);
+ bnx2x_cl22_read(bp, phy,
+ 0x5, &lp_pause);
+ } else {
+ bnx2x_cl45_read(bp, phy,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_ADV_PAUSE, &ld_pause);
+ bnx2x_cl45_read(bp, phy,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_LP_AUTO_NEG, &lp_pause);
+ }
pause_result = (ld_pause &
MDIO_AN_REG_ADV_PAUSE_MASK) >> 8;
pause_result |= (lp_pause &
@@ -4653,8 +4740,13 @@ static u16 bnx2x_wait_reset_complete(struct bnx2x *bp,
u16 cnt, ctrl;
/* Wait for soft reset to get cleared up to 1 sec */
for (cnt = 0; cnt < 1000; cnt++) {
- bnx2x_cl45_read(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, &ctrl);
+ if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54616)
+ bnx2x_cl22_read(bp, phy,
+ MDIO_PMA_REG_CTRL, &ctrl);
+ else
+ bnx2x_cl45_read(bp, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_CTRL, &ctrl);
if (!(ctrl & (1<<15)))
break;
msleep(1);
@@ -8808,6 +8900,329 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy,
}
}
/******************************************************************/
+/* 54616S PHY SECTION */
+/******************************************************************/
+static int bnx2x_54616s_config_init(struct bnx2x_phy *phy,
+ struct link_params *params,
+ struct link_vars *vars)
+{
+ struct bnx2x *bp = params->bp;
+ u8 port;
+ u16 autoneg_val, an_1000_val, an_10_100_val, fc_val, temp;
+ u32 cfg_pin;
+
+ DP(NETIF_MSG_LINK, "54616S cfg init\n");
+ usleep_range(1000, 1000);
+
+ /* This works with E3 only, no need to check the chip
+ before determining the port. */
+ port = params->port;
+
+ cfg_pin = (REG_RD(bp, params->shmem_base +
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[port].e3_cmn_pin_cfg)) &
+ PORT_HW_CFG_E3_PHY_RESET_MASK) >>
+ PORT_HW_CFG_E3_PHY_RESET_SHIFT;
+
+ /* Drive pin high to bring the GPHY out of reset. */
+ bnx2x_set_cfg_pin(bp, cfg_pin, 1);
+
+ /* wait for GPHY to reset */
+ msleep(50);
+
+ /* reset phy */
+ bnx2x_cl22_write(bp, phy,
+ MDIO_PMA_REG_CTRL, 0x8000);
+ bnx2x_wait_reset_complete(bp, phy, params);
+
+ /*wait for GPHY to reset */
+ msleep(50);
+
+ /* Configure LED4: set to INTR (0x6). */
+ /* Accessing shadow register 0xe. */
+ bnx2x_cl22_write(bp, phy,
+ MDIO_REG_GPHY_SHADOW,
+ MDIO_REG_GPHY_SHADOW_LED_SEL2);
+ bnx2x_cl22_read(bp, phy,
+ MDIO_REG_GPHY_SHADOW,
+ &temp);
+ temp &= ~(0xf << 4);
+ temp |= (0x6 << 4);
+ bnx2x_cl22_write(bp, phy,
+ MDIO_REG_GPHY_SHADOW,
+ MDIO_REG_GPHY_SHADOW_WR_ENA | temp);
+ /* Configure INTR based on link status change. */
+ bnx2x_cl22_write(bp, phy,
+ MDIO_REG_INTR_MASK,
+ ~MDIO_REG_INTR_MASK_LINK_STATUS);
+
+ /* Flip the signal detect polarity (set 0x1c.0x1e[8]). */
+ bnx2x_cl22_write(bp, phy,
+ MDIO_REG_GPHY_SHADOW,
+ MDIO_REG_GPHY_SHADOW_AUTO_DET_MED);
+ bnx2x_cl22_read(bp, phy,
+ MDIO_REG_GPHY_SHADOW,
+ &temp);
+ temp |= MDIO_REG_GPHY_SHADOW_INVERT_FIB_SD;
+ bnx2x_cl22_write(bp, phy,
+ MDIO_REG_GPHY_SHADOW,
+ MDIO_REG_GPHY_SHADOW_WR_ENA | temp);
+
+ /* Set up fc */
+ /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
+ bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc);
+ fc_val = 0;
+ if ((vars->ieee_fc & MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC)
+ fc_val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC;
+
+ if ((vars->ieee_fc & MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH)
+ fc_val |= MDIO_AN_REG_ADV_PAUSE_PAUSE;
+
+ /* read all advertisement */
+ bnx2x_cl22_read(bp, phy,
+ 0x09,
+ &an_1000_val);
+
+ bnx2x_cl22_read(bp, phy,
+ 0x04,
+ &an_10_100_val);
+
+ bnx2x_cl22_read(bp, phy,
+ MDIO_PMA_REG_CTRL,
+ &autoneg_val);
+
+ /* Disable forced speed */
+ autoneg_val &= ~((1<<6) | (1<<8) | (1<<9) | (1<<12) | (1<<13));
+ an_10_100_val &= ~((1<<5) | (1<<6) | (1<<7) | (1<<8) | (1<<10) |
+ (1<<11));
+
+ if (((phy->req_line_speed == SPEED_AUTO_NEG) &&
+ (phy->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
+ (phy->req_line_speed == SPEED_1000)) {
+ an_1000_val |= (1<<8);
+ autoneg_val |= (1<<9 | 1<<12);
+ if (phy->req_duplex == DUPLEX_FULL)
+ an_1000_val |= (1<<9);
+ DP(NETIF_MSG_LINK, "Advertising 1G\n");
+ } else
+ an_1000_val &= ~((1<<8) | (1<<9));
+
+ bnx2x_cl22_write(bp, phy,
+ 0x09,
+ an_1000_val);
+ bnx2x_cl22_read(bp, phy,
+ 0x09,
+ &an_1000_val);
+
+ /* set 100 speed advertisement */
+ if (((phy->req_line_speed == SPEED_AUTO_NEG) &&
+ (phy->speed_cap_mask &
+ (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL |
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)))) {
+ an_10_100_val |= (1<<7);
+ /* Enable autoneg and restart autoneg for legacy speeds */
+ autoneg_val |= (1<<9 | 1<<12);
+
+ if (phy->req_duplex == DUPLEX_FULL)
+ an_10_100_val |= (1<<8);
+ DP(NETIF_MSG_LINK, "Advertising 100M\n");
+ }
+
+ /* set 10 speed advertisement */
+ if (((phy->req_line_speed == SPEED_AUTO_NEG) &&
+ (phy->speed_cap_mask &
+ (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL |
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)))) {
+ an_10_100_val |= (1<<5);
+ autoneg_val |= (1<<9 | 1<<12);
+ if (phy->req_duplex == DUPLEX_FULL)
+ an_10_100_val |= (1<<6);
+ DP(NETIF_MSG_LINK, "Advertising 10M\n");
+ }
+
+ /* Only 10/100 are allowed to work in FORCE mode */
+ if (phy->req_line_speed == SPEED_100) {
+ autoneg_val |= (1<<13);
+ /* Enabled AUTO-MDIX when autoneg is disabled */
+ bnx2x_cl22_write(bp, phy,
+ 0x18,
+ (1<<15 | 1<<9 | 7<<0));
+ DP(NETIF_MSG_LINK, "Setting 100M force\n");
+ }
+ if (phy->req_line_speed == SPEED_10) {
+ /* Enabled AUTO-MDIX when autoneg is disabled */
+ bnx2x_cl22_write(bp, phy,
+ 0x18,
+ (1<<15 | 1<<9 | 7<<0));
+ DP(NETIF_MSG_LINK, "Setting 10M force\n");
+ }
+
+ bnx2x_cl22_write(bp, phy,
+ 0x04,
+ an_10_100_val | fc_val);
+
+ if (phy->req_duplex == DUPLEX_FULL)
+ autoneg_val |= (1<<8);
+
+ bnx2x_cl22_write(bp, phy,
+ MDIO_PMA_REG_CTRL, autoneg_val);
+
+ return 0;
+}
+
+static void bnx2x_54616s_set_link_led(struct bnx2x_phy *phy,
+ struct link_params *params, u8 mode)
+{
+ struct bnx2x *bp = params->bp;
+ DP(NETIF_MSG_LINK, "54616S set link led (mode=%x)\n", mode);
+ switch (mode) {
+ case LED_MODE_FRONT_PANEL_OFF:
+ case LED_MODE_OFF:
+ case LED_MODE_OPER:
+ case LED_MODE_ON:
+ default:
+ break;
+ }
+ return;
+}
+
+static void bnx2x_54616s_link_reset(struct bnx2x_phy *phy,
+ struct link_params *params)
+{
+ struct bnx2x *bp = params->bp;
+ u32 cfg_pin;
+ u8 port;
+
+ /* This works with E3 only, no need to check the chip
+ before determining the port. */
+ port = params->port;
+ cfg_pin = (REG_RD(bp, params->shmem_base +
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[port].e3_cmn_pin_cfg)) &
+ PORT_HW_CFG_E3_PHY_RESET_MASK) >>
+ PORT_HW_CFG_E3_PHY_RESET_SHIFT;
+
+ /* Drive pin low to put GPHY in reset. */
+ bnx2x_set_cfg_pin(bp, cfg_pin, 0);
+}
+
+static u8 bnx2x_54616s_read_status(struct bnx2x_phy *phy,
+ struct link_params *params,
+ struct link_vars *vars)
+{
+ struct bnx2x *bp = params->bp;
+ u16 val;
+ u8 link_up = 0;
+ u16 legacy_status, legacy_speed;
+
+ /* Get speed operation status */
+ bnx2x_cl22_read(bp, phy,
+ 0x19,
+ &legacy_status);
+ DP(NETIF_MSG_LINK, "54616S read_status: 0x%x\n", legacy_status);
+
+ /* Read status to clear the PHY interrupt. */
+ bnx2x_cl22_read(bp, phy,
+ MDIO_REG_INTR_STATUS,
+ &val);
+
+ link_up = ((legacy_status & (1<<2)) == (1<<2));
+
+ if (link_up) {
+ legacy_speed = (legacy_status & (7<<8));
+ if (legacy_speed == (7<<8)) {
+ vars->line_speed = SPEED_1000;
+ vars->duplex = DUPLEX_FULL;
+ } else if (legacy_speed == (6<<8)) {
+ vars->line_speed = SPEED_1000;
+ vars->duplex = DUPLEX_HALF;
+ } else if (legacy_speed == (5<<8)) {
+ vars->line_speed = SPEED_100;
+ vars->duplex = DUPLEX_FULL;
+ }
+ /* Omitting 100Base-T4 for now */
+ else if (legacy_speed == (3<<8)) {
+ vars->line_speed = SPEED_100;
+ vars->duplex = DUPLEX_HALF;
+ } else if (legacy_speed == (2<<8)) {
+ vars->line_speed = SPEED_10;
+ vars->duplex = DUPLEX_FULL;
+ } else if (legacy_speed == (1<<8)) {
+ vars->line_speed = SPEED_10;
+ vars->duplex = DUPLEX_HALF;
+ } else /* Should not happen */
+ vars->line_speed = 0;
+
+ DP(NETIF_MSG_LINK, "Link is up in %dMbps,"
+ " is_duplex_full= %d\n", vars->line_speed,
+ (vars->duplex == DUPLEX_FULL));
+
+ /* Check legacy speed AN resolution */
+ bnx2x_cl22_read(bp, phy,
+ 0x01,
+ &val);
+ if (val & (1<<5))
+ vars->link_status |=
+ LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;
+ bnx2x_cl22_read(bp, phy,
+ 0x06,
+ &val);
+ if ((val & (1<<0)) == 0)
+ vars->link_status |=
+ LINK_STATUS_PARALLEL_DETECTION_USED;
+
+ DP(NETIF_MSG_LINK, "BCM54616S: link speed is %d\n",
+ vars->line_speed);
+ bnx2x_ext_phy_resolve_fc(phy, params, vars);
+ }
+ return link_up;
+}
+
+static void bnx2x_54616s_config_loopback(struct bnx2x_phy *phy,
+ struct link_params *params)
+{
+ struct bnx2x *bp = params->bp;
+ u16 val;
+ u32 umac_base = params->port ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
+
+ DP(NETIF_MSG_LINK, "2PMA/PMD ext_phy_loopback: 54616s\n");
+
+ /* Enable master/slave manual mmode and set to master */
+ /* mii write 9 [bits set 11 12] */
+ bnx2x_cl22_write(bp, phy, 0x09, 3<<11);
+
+ /* forced 1G and disable autoneg */
+ /* set val [mii read 0] */
+ /* set val [expr $val & [bits clear 6 12 13]] */
+ /* set val [expr $val | [bits set 6 8]] */
+ /* mii write 0 $val */
+ bnx2x_cl22_read(bp, phy, 0x00, &val);
+ val &= ~((1<<6) | (1<<12) | (1<<13));
+ val |= (1<<6) | (1<<8);
+ bnx2x_cl22_write(bp, phy, 0x00, val);
+
+ /* Set external loopback and Tx using 6dB coding */
+ /* mii write 0x18 7 */
+ /* set val [mii read 0x18] */
+ /* mii write 0x18 [expr $val | [bits set 10 15]] */
+ bnx2x_cl22_write(bp, phy, 0x18, 7);
+ bnx2x_cl22_read(bp, phy, 0x18, &val);
+ bnx2x_cl22_write(bp, phy, 0x18, val | (1<<10) | (1<<15));
+
+ /* This register opens the gate for the UMAC despite its name */
+ REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + params->port*4, 1);
+
+ /*
+ * Maximum Frame Length (RW). Defines a 14-Bit maximum frame
+ * length used by the MAC receive logic to check frames.
+ */
+ REG_WR(bp, umac_base + UMAC_REG_MAXFR, 0x2710);
+}
+
+/******************************************************************/
/* SFX7101 PHY SECTION */
/******************************************************************/
static void bnx2x_7101_config_loopback(struct bnx2x_phy *phy,
@@ -9390,6 +9805,39 @@ static struct bnx2x_phy phy_84833 = {
.phy_specific_func = (phy_specific_func_t)NULL
};
+static struct bnx2x_phy phy_54616s = {
+ .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54616,
+ .addr = 0xff,
+ .def_md_devad = 0,
+ .flags = FLAGS_INIT_XGXS_FIRST,
+ .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .mdio_ctrl = 0,
+ .supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_TP |
+ SUPPORTED_Autoneg |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause),
+ .media_type = ETH_PHY_BASE_T,
+ .ver_addr = 0,
+ .req_flow_ctrl = 0,
+ .req_line_speed = 0,
+ .speed_cap_mask = 0,
+ /* req_duplex = */0,
+ /* rsrv = */0,
+ .config_init = (config_init_t)bnx2x_54616s_config_init,
+ .read_status = (read_status_t)bnx2x_54616s_read_status,
+ .link_reset = (link_reset_t)bnx2x_54616s_link_reset,
+ .config_loopback = (config_loopback_t)bnx2x_54616s_config_loopback,
+ .format_fw_ver = (format_fw_ver_t)NULL,
+ .hw_reset = (hw_reset_t)NULL,
+ .set_link_led = (set_link_led_t)bnx2x_54616s_set_link_led,
+ .phy_specific_func = (phy_specific_func_t)NULL
+};
/*****************************************************************/
/* */
/* Populate the phy according. Main function: bnx2x_populate_phy */
@@ -9630,6 +10078,9 @@ static int bnx2x_populate_ext_phy(struct bnx2x *bp,
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833:
*phy = phy_84833;
break;
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54616:
+ *phy = phy_54616s;
+ break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
*phy = phy_7101;
break;
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h
index 23c89a8..bf43b9b 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/bnx2x/bnx2x_reg.h
@@ -5420,7 +5420,9 @@
#define EMAC_LED_OVERRIDE (1L<<0)
#define EMAC_LED_TRAFFIC (1L<<6)
#define EMAC_MDIO_COMM_COMMAND_ADDRESS (0L<<26)
+#define EMAC_MDIO_COMM_COMMAND_READ_22 (2L<<26)
#define EMAC_MDIO_COMM_COMMAND_READ_45 (3L<<26)
+#define EMAC_MDIO_COMM_COMMAND_WRITE_22 (1L<<26)
#define EMAC_MDIO_COMM_COMMAND_WRITE_45 (1L<<26)
#define EMAC_MDIO_COMM_DATA (0xffffL<<0)
#define EMAC_MDIO_COMM_START_BUSY (1L<<29)
@@ -6737,6 +6739,16 @@ Theotherbitsarereservedandshouldbezero*/
#define DIGITAL5_ACTUAL_SPEED_TX_MASK 0x003f
+/* 54616s */
+#define MDIO_REG_INTR_STATUS 0x1a
+#define MDIO_REG_INTR_MASK 0x1b
+#define MDIO_REG_INTR_MASK_LINK_STATUS (0x1 << 1)
+#define MDIO_REG_GPHY_SHADOW 0x1c
+#define MDIO_REG_GPHY_SHADOW_LED_SEL2 (0x0e << 10)
+#define MDIO_REG_GPHY_SHADOW_WR_ENA (0x1 << 15)
+#define MDIO_REG_GPHY_SHADOW_AUTO_DET_MED (0x1e << 10)
+#define MDIO_REG_GPHY_SHADOW_INVERT_FIB_SD (0x1 << 8)
+
#define IGU_FUNC_BASE 0x0400
#define IGU_ADDR_MSIX 0x0000
generated by cgit v0.10.2 at 2024-11-03 11:13:34 (GMT)