diff options
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/bnx2x/bnx2x_link.c | 133 |
1 files changed, 66 insertions, 67 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index e992d40..3be2ce0 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -171,13 +171,13 @@ /* INTERFACE */ /**********************************************************/ -#define CL45_WR_OVER_CL22(_bp, _phy, _bank, _addr, _val) \ +#define CL22_WR_OVER_CL45(_bp, _phy, _bank, _addr, _val) \ bnx2x_cl45_write(_bp, _phy, \ (_phy)->def_md_devad, \ (_bank + (_addr & 0xf)), \ _val) -#define CL45_RD_OVER_CL22(_bp, _phy, _bank, _addr, _val) \ +#define CL22_RD_OVER_CL45(_bp, _phy, _bank, _addr, _val) \ bnx2x_cl45_read(_bp, _phy, \ (_phy)->def_md_devad, \ (_bank + (_addr & 0xf)), \ @@ -1553,13 +1553,13 @@ static void bnx2x_set_aer_mmd_xgxs(struct link_params *params, aer_val = 0x3800 + offset - 1; else aer_val = 0x3800 + offset; - CL45_WR_OVER_CL22(bp, phy, MDIO_REG_BANK_AER_BLOCK, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, MDIO_AER_BLOCK_AER_REG, aer_val); } static void bnx2x_set_aer_mmd_serdes(struct bnx2x *bp, struct bnx2x_phy *phy) { - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, MDIO_AER_BLOCK_AER_REG, 0x3800); } @@ -1758,12 +1758,12 @@ static void bnx2x_set_master_ln(struct link_params *params, PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); /* set the master_ln for AN */ - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_XGXS_BLOCK2, MDIO_XGXS_BLOCK2_TEST_MODE_LANE, &new_master_ln); - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_XGXS_BLOCK2 , MDIO_XGXS_BLOCK2_TEST_MODE_LANE, (new_master_ln | ser_lane)); @@ -1776,13 +1776,12 @@ static u8 bnx2x_reset_unicore(struct link_params *params, struct bnx2x *bp = params->bp; u16 mii_control; u16 i; - - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_COMBO_IEEE0, MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control); /* reset the unicore */ - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_COMBO_IEEE0, MDIO_COMBO_IEEE0_MII_CONTROL, (mii_control | @@ -1795,7 +1794,7 @@ static u8 bnx2x_reset_unicore(struct link_params *params, udelay(5); /* the reset erased the previous bank value */ - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_COMBO_IEEE0, MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control); @@ -1830,26 +1829,26 @@ static void bnx2x_set_swap_lanes(struct link_params *params, PORT_HW_CFG_LANE_SWAP_CFG_TX_SHIFT); if (rx_lane_swap != 0x1b) { - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_XGXS_BLOCK2, MDIO_XGXS_BLOCK2_RX_LN_SWAP, (rx_lane_swap | MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE | MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE)); } else { - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_XGXS_BLOCK2, MDIO_XGXS_BLOCK2_RX_LN_SWAP, 0); } if (tx_lane_swap != 0x1b) { - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_XGXS_BLOCK2, MDIO_XGXS_BLOCK2_TX_LN_SWAP, (tx_lane_swap | MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE)); } else { - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_XGXS_BLOCK2, MDIO_XGXS_BLOCK2_TX_LN_SWAP, 0); } @@ -1860,7 +1859,7 @@ static void bnx2x_set_parallel_detection(struct bnx2x_phy *phy, { struct bnx2x *bp = params->bp; u16 control2; - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_SERDES_DIGITAL, MDIO_SERDES_DIGITAL_A_1000X_CONTROL2, &control2); @@ -1870,7 +1869,7 @@ static void bnx2x_set_parallel_detection(struct bnx2x_phy *phy, control2 &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN; DP(NETIF_MSG_LINK, "phy->speed_cap_mask = 0x%x, control2 = 0x%x\n", phy->speed_cap_mask, control2); - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_SERDES_DIGITAL, MDIO_SERDES_DIGITAL_A_1000X_CONTROL2, control2); @@ -1880,12 +1879,12 @@ static void bnx2x_set_parallel_detection(struct bnx2x_phy *phy, PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) { DP(NETIF_MSG_LINK, "XGXS\n"); - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_10G_PARALLEL_DETECT, MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK, MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT); - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_10G_PARALLEL_DETECT, MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, &control2); @@ -1894,13 +1893,13 @@ static void bnx2x_set_parallel_detection(struct bnx2x_phy *phy, control2 |= MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN; - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_10G_PARALLEL_DETECT, MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, control2); /* Disable parallel detection of HiG */ - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_XGXS_BLOCK2, MDIO_XGXS_BLOCK2_UNICORE_MODE_10G, MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS | @@ -1917,7 +1916,7 @@ static void bnx2x_set_autoneg(struct bnx2x_phy *phy, u16 reg_val; /* CL37 Autoneg */ - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_COMBO_IEEE0, MDIO_COMBO_IEEE0_MII_CONTROL, ®_val); @@ -1928,13 +1927,13 @@ static void bnx2x_set_autoneg(struct bnx2x_phy *phy, reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN | MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN); - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_COMBO_IEEE0, MDIO_COMBO_IEEE0_MII_CONTROL, reg_val); /* Enable/Disable Autodetection */ - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_SERDES_DIGITAL, MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, ®_val); reg_val &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN | @@ -1945,12 +1944,12 @@ static void bnx2x_set_autoneg(struct bnx2x_phy *phy, else reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET; - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_SERDES_DIGITAL, MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, reg_val); /* Enable TetonII and BAM autoneg */ - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_BAM_NEXT_PAGE, MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL, ®_val); @@ -1963,20 +1962,20 @@ static void bnx2x_set_autoneg(struct bnx2x_phy *phy, reg_val &= ~(MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE | MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN); } - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_BAM_NEXT_PAGE, MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL, reg_val); if (enable_cl73) { /* Enable Cl73 FSM status bits */ - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_CL73_USERB0, MDIO_CL73_USERB0_CL73_UCTRL, 0xe); /* Enable BAM Station Manager*/ - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_CL73_USERB0, MDIO_CL73_USERB0_CL73_BAM_CTRL1, MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN | @@ -1984,7 +1983,7 @@ static void bnx2x_set_autoneg(struct bnx2x_phy *phy, MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN); /* Advertise CL73 link speeds */ - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_CL73_IEEEB1, MDIO_CL73_IEEEB1_AN_ADV2, ®_val); @@ -1995,7 +1994,7 @@ static void bnx2x_set_autoneg(struct bnx2x_phy *phy, PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX; - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_CL73_IEEEB1, MDIO_CL73_IEEEB1_AN_ADV2, reg_val); @@ -2006,7 +2005,7 @@ static void bnx2x_set_autoneg(struct bnx2x_phy *phy, } else /* CL73 Autoneg Disabled */ reg_val = 0; - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_CL73_IEEEB0, MDIO_CL73_IEEEB0_CL73_AN_CONTROL, reg_val); } @@ -2020,7 +2019,7 @@ static void bnx2x_program_serdes(struct bnx2x_phy *phy, u16 reg_val; /* program duplex, disable autoneg and sgmii*/ - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_COMBO_IEEE0, MDIO_COMBO_IEEE0_MII_CONTROL, ®_val); reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX | @@ -2028,13 +2027,13 @@ static void bnx2x_program_serdes(struct bnx2x_phy *phy, MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK); if (phy->req_duplex == DUPLEX_FULL) reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX; - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_COMBO_IEEE0, MDIO_COMBO_IEEE0_MII_CONTROL, reg_val); /* program speed - needed only if the speed is greater than 1G (2.5G or 10G) */ - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_SERDES_DIGITAL, MDIO_SERDES_DIGITAL_MISC1, ®_val); /* clearing the speed value before setting the right speed */ @@ -2057,7 +2056,7 @@ static void bnx2x_program_serdes(struct bnx2x_phy *phy, MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G; } - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_SERDES_DIGITAL, MDIO_SERDES_DIGITAL_MISC1, reg_val); @@ -2076,11 +2075,11 @@ static void bnx2x_set_brcm_cl37_advertisment(struct bnx2x_phy *phy, val |= MDIO_OVER_1G_UP1_2_5G; if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) val |= MDIO_OVER_1G_UP1_10G; - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_OVER_1G, MDIO_OVER_1G_UP1, val); - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_OVER_1G, MDIO_OVER_1G_UP3, 0x400); } @@ -2126,15 +2125,15 @@ static void bnx2x_set_ieee_aneg_advertisment(struct bnx2x_phy *phy, u16 val; /* for AN, we are always publishing full duplex */ - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_COMBO_IEEE0, MDIO_COMBO_IEEE0_AUTO_NEG_ADV, ieee_fc); - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_CL73_IEEEB1, MDIO_CL73_IEEEB1_AN_ADV1, &val); val &= ~MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH; val |= ((ieee_fc<<3) & MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK); - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_CL73_IEEEB1, MDIO_CL73_IEEEB1_AN_ADV1, val); } @@ -2150,12 +2149,12 @@ static void bnx2x_restart_autoneg(struct bnx2x_phy *phy, /* Enable and restart BAM/CL37 aneg */ if (enable_cl73) { - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_CL73_IEEEB0, MDIO_CL73_IEEEB0_CL73_AN_CONTROL, &mii_control); - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_CL73_IEEEB0, MDIO_CL73_IEEEB0_CL73_AN_CONTROL, (mii_control | @@ -2163,14 +2162,14 @@ static void bnx2x_restart_autoneg(struct bnx2x_phy *phy, MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN)); } else { - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_COMBO_IEEE0, MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control); DP(NETIF_MSG_LINK, "bnx2x_restart_autoneg mii_control before = 0x%x\n", mii_control); - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_COMBO_IEEE0, MDIO_COMBO_IEEE0_MII_CONTROL, (mii_control | @@ -2188,7 +2187,7 @@ static void bnx2x_initialize_sgmii_process(struct bnx2x_phy *phy, /* in SGMII mode, the unicore is always slave */ - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_SERDES_DIGITAL, MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, &control1); @@ -2197,7 +2196,7 @@ static void bnx2x_initialize_sgmii_process(struct bnx2x_phy *phy, control1 &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE | MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET | MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE); - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_SERDES_DIGITAL, MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, control1); @@ -2207,7 +2206,7 @@ static void bnx2x_initialize_sgmii_process(struct bnx2x_phy *phy, /* set speed, disable autoneg */ u16 mii_control; - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_COMBO_IEEE0, MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control); @@ -2238,7 +2237,7 @@ static void bnx2x_initialize_sgmii_process(struct bnx2x_phy *phy, if (phy->req_duplex == DUPLEX_FULL) mii_control |= MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX; - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_COMBO_IEEE0, MDIO_COMBO_IEEE0_MII_CONTROL, mii_control); @@ -2288,11 +2287,11 @@ static u8 bnx2x_direct_parallel_detect_used(struct bnx2x_phy *phy, u16 pd_10g, status2_1000x; if (phy->req_line_speed != SPEED_AUTO_NEG) return 0; - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_SERDES_DIGITAL, MDIO_SERDES_DIGITAL_A_1000X_STATUS2, &status2_1000x); - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_SERDES_DIGITAL, MDIO_SERDES_DIGITAL_A_1000X_STATUS2, &status2_1000x); @@ -2302,7 +2301,7 @@ static u8 bnx2x_direct_parallel_detect_used(struct bnx2x_phy *phy, return 1; } - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_10G_PARALLEL_DETECT, MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS, &pd_10g); @@ -2344,11 +2343,11 @@ static void bnx2x_flow_ctrl_resolve(struct bnx2x_phy *phy, (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE | MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE)) { - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_CL73_IEEEB1, MDIO_CL73_IEEEB1_AN_ADV1, &ld_pause); - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_CL73_IEEEB1, MDIO_CL73_IEEEB1_AN_LP_ADV1, &lp_pause); @@ -2361,11 +2360,11 @@ static void bnx2x_flow_ctrl_resolve(struct bnx2x_phy *phy, DP(NETIF_MSG_LINK, "pause_result CL73 0x%x\n", pause_result); } else { - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_COMBO_IEEE0, MDIO_COMBO_IEEE0_AUTO_NEG_ADV, &ld_pause); - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_COMBO_IEEE0, MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1, &lp_pause); @@ -2388,7 +2387,7 @@ static void bnx2x_check_fallback_to_cl37(struct bnx2x_phy *phy, u16 rx_status, ustat_val, cl37_fsm_recieved; DP(NETIF_MSG_LINK, "bnx2x_check_fallback_to_cl37\n"); /* Step 1: Make sure signal is detected */ - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_RX0, MDIO_RX0_RX_STATUS, &rx_status); @@ -2396,14 +2395,14 @@ static void bnx2x_check_fallback_to_cl37(struct bnx2x_phy *phy, (MDIO_RX0_RX_STATUS_SIGDET)) { DP(NETIF_MSG_LINK, "Signal is not detected. Restoring CL73." "rx_status(0x80b0) = 0x%x\n", rx_status); - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_CL73_IEEEB0, MDIO_CL73_IEEEB0_CL73_AN_CONTROL, MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN); return; } /* Step 2: Check CL73 state machine */ - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_CL73_USERB0, MDIO_CL73_USERB0_CL73_USTAT1, &ustat_val); @@ -2418,7 +2417,7 @@ static void bnx2x_check_fallback_to_cl37(struct bnx2x_phy *phy, } /* Step 3: Check CL37 Message Pages received to indicate LP supports only CL37 */ - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_REMOTE_PHY, MDIO_REMOTE_PHY_MISC_RX_STATUS, &cl37_fsm_recieved); @@ -2436,7 +2435,7 @@ static void bnx2x_check_fallback_to_cl37(struct bnx2x_phy *phy, connected to a device which does not support cl73, but does support cl37 BAM. In this case we disable cl73 and restart cl37 auto-neg */ /* Disable CL73 */ - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_CL73_IEEEB0, MDIO_CL73_IEEEB0_CL73_AN_CONTROL, 0); @@ -2468,7 +2467,7 @@ static u8 bnx2x_link_settings_status(struct bnx2x_phy *phy, u8 rc = 0; /* Read gp_status */ - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_GP_STATUS, MDIO_GP_STATUS_TOP_AN_STATUS1, &gp_status); @@ -2608,7 +2607,7 @@ static void bnx2x_set_gmii_tx_driver(struct link_params *params) u16 bank; /* read precomp */ - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_OVER_1G, MDIO_OVER_1G_LP_UP2, &lp_up2); @@ -2622,7 +2621,7 @@ static void bnx2x_set_gmii_tx_driver(struct link_params *params) for (bank = MDIO_REG_BANK_TX0; bank <= MDIO_REG_BANK_TX3; bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0)) { - CL45_RD_OVER_CL22(bp, phy, + CL22_RD_OVER_CL45(bp, phy, bank, MDIO_TX0_TX_DRIVER, &tx_driver); @@ -2631,7 +2630,7 @@ static void bnx2x_set_gmii_tx_driver(struct link_params *params) (tx_driver & MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK)) { tx_driver &= ~MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK; tx_driver |= lp_up2; - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, bank, MDIO_TX0_TX_DRIVER, tx_driver); } @@ -2694,7 +2693,7 @@ static void bnx2x_set_preemphasis(struct bnx2x_phy *phy, for (bank = MDIO_REG_BANK_RX0, i = 0; bank <= MDIO_REG_BANK_RX3; bank += (MDIO_REG_BANK_RX1-MDIO_REG_BANK_RX0), i++) { - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, bank, MDIO_RX0_RX_EQ_BOOST, phy->rx_preemphasis[i]); @@ -2702,7 +2701,7 @@ static void bnx2x_set_preemphasis(struct bnx2x_phy *phy, for (bank = MDIO_REG_BANK_TX0, i = 0; bank <= MDIO_REG_BANK_TX3; bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0), i++) { - CL45_WR_OVER_CL22(bp, phy, + CL22_WR_OVER_CL45(bp, phy, bank, MDIO_TX0_TX_DRIVER, phy->tx_preemphasis[i]); @@ -3208,7 +3207,7 @@ u8 bnx2x_test_link(struct link_params *params, struct link_vars *vars, u8 ext_phy_link_up = 0, serdes_phy_type; struct link_vars temp_vars; - CL45_RD_OVER_CL22(bp, ¶ms->phy[INT_PHY], + CL22_RD_OVER_CL45(bp, ¶ms->phy[INT_PHY], MDIO_REG_BANK_GP_STATUS, MDIO_GP_STATUS_TOP_AN_STATUS1, &gp_status); |