summaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/wireless/ath/ath9k/Kconfig3
-rw-r--r--drivers/net/wireless/ath/ath9k/Makefile3
-rw-r--r--drivers/net/wireless/ath/ath9k/ath9k.h95
-rw-r--r--drivers/net/wireless/ath/ath9k/common.c326
-rw-r--r--drivers/net/wireless/ath/ath9k/common.h123
-rw-r--r--drivers/net/wireless/ath/ath9k/rc.h2
-rw-r--r--drivers/net/wireless/ath/ath9k/recv.c284
7 files changed, 467 insertions, 369 deletions
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index b735fb3..006364f 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -1,5 +1,7 @@
config ATH9K_HW
tristate
+config ATH9K_COMMON
+ tristate
config ATH9K
tristate "Atheros 802.11n wireless cards support"
@@ -8,6 +10,7 @@ config ATH9K
select MAC80211_LEDS
select LEDS_CLASS
select NEW_LEDS
+ select ATH9K_COMMON
---help---
This module adds support for wireless adapters based on
Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 8caf2a8..e53f9680 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -23,3 +23,6 @@ ath9k_hw-y:= hw.o \
mac.o \
obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
+
+obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o
+ath9k_common-y:= common.o
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 88969cb..d9bcc3a 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -19,14 +19,16 @@
#include <linux/etherdevice.h>
#include <linux/device.h>
-#include <net/mac80211.h>
#include <linux/leds.h>
-#include "hw.h"
#include "rc.h"
#include "debug.h"
-#include "../ath.h"
-#include "../debug.h"
+#include "common.h"
+
+/*
+ * Header for the ath9k.ko driver core *only* -- hw code nor any other driver
+ * should rely on this file or its contents.
+ */
struct ath_node;
@@ -99,18 +101,6 @@ enum buffer_type {
BUF_XRETRY = BIT(5),
};
-struct ath_buf_state {
- int bfs_nframes;
- u16 bfs_al;
- u16 bfs_frmlen;
- int bfs_seqno;
- int bfs_tidno;
- int bfs_retries;
- u8 bf_type;
- u32 bfs_keyix;
- enum ath9k_key_type bfs_keytype;
-};
-
#define bf_nframes bf_state.bfs_nframes
#define bf_al bf_state.bfs_al
#define bf_frmlen bf_state.bfs_frmlen
@@ -125,21 +115,6 @@ struct ath_buf_state {
#define bf_isretried(bf) (bf->bf_state.bf_type & BUF_RETRY)
#define bf_isxretried(bf) (bf->bf_state.bf_type & BUF_XRETRY)
-struct ath_buf {
- struct list_head list;
- struct ath_buf *bf_lastbf; /* last buf of this unit (a frame or
- an aggregate) */
- struct ath_buf *bf_next; /* next subframe in the aggregate */
- struct sk_buff *bf_mpdu; /* enclosing frame structure */
- struct ath_desc *bf_desc; /* virtual addr of desc */
- dma_addr_t bf_daddr; /* physical addr of desc */
- dma_addr_t bf_buf_addr; /* physical addr of data buffer */
- bool bf_stale;
- u16 bf_flags;
- struct ath_buf_state bf_state;
- dma_addr_t bf_dmacontext;
-};
-
struct ath_descdma {
struct ath_desc *dd_desc;
dma_addr_t dd_desc_paddr;
@@ -159,13 +134,9 @@ void ath_descdma_cleanup(struct ath_softc *sc, struct ath_descdma *dd,
#define ATH_MAX_ANTENNA 3
#define ATH_RXBUF 512
-#define WME_NUM_TID 16
#define ATH_TXBUF 512
#define ATH_TXMAXTRY 13
#define ATH_MGT_TXMAXTRY 4
-#define WME_BA_BMP_SIZE 64
-#define WME_MAX_BA WME_BA_BMP_SIZE
-#define ATH_TID_MAX_BUFS (2 * WME_MAX_BA)
#define TID_TO_WME_AC(_tid) \
((((_tid) == 0) || ((_tid) == 3)) ? WME_AC_BE : \
@@ -173,12 +144,6 @@ void ath_descdma_cleanup(struct ath_softc *sc, struct ath_descdma *dd,
(((_tid) == 4) || ((_tid) == 5)) ? WME_AC_VI : \
WME_AC_VO)
-#define WME_AC_BE 0
-#define WME_AC_BK 1
-#define WME_AC_VI 2
-#define WME_AC_VO 3
-#define WME_NUM_AC 4
-
#define ADDBA_EXCHANGE_ATTEMPTS 10
#define ATH_AGGR_DELIM_SZ 4
#define ATH_AGGR_MINPLEN 256 /* in bytes, minimum packet length */
@@ -252,30 +217,6 @@ struct ath_txq {
#define AGGR_ADDBA_COMPLETE BIT(2)
#define AGGR_ADDBA_PROGRESS BIT(3)
-struct ath_atx_tid {
- struct list_head list;
- struct list_head buf_q;
- struct ath_node *an;
- struct ath_atx_ac *ac;
- struct ath_buf *tx_buf[ATH_TID_MAX_BUFS];
- u16 seq_start;
- u16 seq_next;
- u16 baw_size;
- int tidno;
- int baw_head; /* first un-acked tx buffer */
- int baw_tail; /* next unused tx buffer slot */
- int sched;
- int paused;
- u8 state;
-};
-
-struct ath_atx_ac {
- int sched;
- int qnum;
- struct list_head list;
- struct list_head tid_q;
-};
-
struct ath_tx_control {
struct ath_txq *txq;
int if_id;
@@ -286,29 +227,6 @@ struct ath_tx_control {
#define ATH_TX_XRETRY 0x02
#define ATH_TX_BAR 0x04
-#define ATH_RSSI_LPF_LEN 10
-#define RSSI_LPF_THRESHOLD -20
-#define ATH_RSSI_EP_MULTIPLIER (1<<7)
-#define ATH_EP_MUL(x, mul) ((x) * (mul))
-#define ATH_RSSI_IN(x) (ATH_EP_MUL((x), ATH_RSSI_EP_MULTIPLIER))
-#define ATH_LPF_RSSI(x, y, len) \
- ((x != ATH_RSSI_DUMMY_MARKER) ? (((x) * ((len) - 1) + (y)) / (len)) : (y))
-#define ATH_RSSI_LPF(x, y) do { \
- if ((y) >= RSSI_LPF_THRESHOLD) \
- x = ATH_LPF_RSSI((x), ATH_RSSI_IN((y)), ATH_RSSI_LPF_LEN); \
-} while (0)
-#define ATH_EP_RND(x, mul) \
- ((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul))
-
-struct ath_node {
- struct ath_softc *an_sc;
- struct ath_atx_tid tid[WME_NUM_TID];
- struct ath_atx_ac ac[WME_NUM_AC];
- u16 maxampdu;
- u8 mpdudensity;
- int last_rssi;
-};
-
struct ath_tx {
u16 seq_no;
u32 txqsetup;
@@ -493,7 +411,6 @@ struct ath_led {
#define IEEE80211_WEP_NKID 4 /* number of key ids */
#define ATH_TXPOWER_MAX 100 /* .5 dBm units */
-#define ATH_RSSI_DUMMY_MARKER 0x127
#define ATH_RATE_DUMMY_MARKER 0
#define SC_OP_INVALID BIT(0)
diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
new file mode 100644
index 0000000..5fb164e
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -0,0 +1,326 @@
+/*
+ * Copyright (c) 2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * Module for common driver code between ath9k and ath9k_htc
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "common.h"
+
+MODULE_AUTHOR("Atheros Communications");
+MODULE_DESCRIPTION("Shared library for Atheros wireless 802.11n LAN cards.");
+MODULE_LICENSE("Dual BSD/GPL");
+
+/* Common RX processing */
+
+/* Assumes you've already done the endian to CPU conversion */
+static bool ath9k_rx_accept(struct ath_common *common,
+ struct sk_buff *skb,
+ struct ieee80211_rx_status *rxs,
+ struct ath_rx_status *rx_stats,
+ bool *decrypt_error)
+{
+ struct ath_hw *ah = common->ah;
+ struct ieee80211_hdr *hdr;
+ __le16 fc;
+
+ hdr = (struct ieee80211_hdr *) skb->data;
+ fc = hdr->frame_control;
+
+ if (!rx_stats->rs_datalen)
+ return false;
+ /*
+ * rs_status follows rs_datalen so if rs_datalen is too large
+ * we can take a hint that hardware corrupted it, so ignore
+ * those frames.
+ */
+ if (rx_stats->rs_datalen > common->rx_bufsize)
+ return false;
+
+ if (rx_stats->rs_more) {
+ /*
+ * Frame spans multiple descriptors; this cannot happen yet
+ * as we don't support jumbograms. If not in monitor mode,
+ * discard the frame. Enable this if you want to see
+ * error frames in Monitor mode.
+ */
+ if (ah->opmode != NL80211_IFTYPE_MONITOR)
+ return false;
+ } else if (rx_stats->rs_status != 0) {
+ if (rx_stats->rs_status & ATH9K_RXERR_CRC)
+ rxs->flag |= RX_FLAG_FAILED_FCS_CRC;
+ if (rx_stats->rs_status & ATH9K_RXERR_PHY)
+ return false;
+
+ if (rx_stats->rs_status & ATH9K_RXERR_DECRYPT) {
+ *decrypt_error = true;
+ } else if (rx_stats->rs_status & ATH9K_RXERR_MIC) {
+ if (ieee80211_is_ctl(fc))
+ /*
+ * Sometimes, we get invalid
+ * MIC failures on valid control frames.
+ * Remove these mic errors.
+ */
+ rx_stats->rs_status &= ~ATH9K_RXERR_MIC;
+ else
+ rxs->flag |= RX_FLAG_MMIC_ERROR;
+ }
+ /*
+ * Reject error frames with the exception of
+ * decryption and MIC failures. For monitor mode,
+ * we also ignore the CRC error.
+ */
+ if (ah->opmode == NL80211_IFTYPE_MONITOR) {
+ if (rx_stats->rs_status &
+ ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC |
+ ATH9K_RXERR_CRC))
+ return false;
+ } else {
+ if (rx_stats->rs_status &
+ ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC)) {
+ return false;
+ }
+ }
+ }
+ return true;
+}
+
+static u8 ath9k_process_rate(struct ath_common *common,
+ struct ieee80211_hw *hw,
+ struct ath_rx_status *rx_stats,
+ struct ieee80211_rx_status *rxs,
+ struct sk_buff *skb)
+{
+ struct ieee80211_supported_band *sband;
+ enum ieee80211_band band;
+ unsigned int i = 0;
+
+ band = hw->conf.channel->band;
+ sband = hw->wiphy->bands[band];
+
+ if (rx_stats->rs_rate & 0x80) {
+ /* HT rate */
+ rxs->flag |= RX_FLAG_HT;
+ if (rx_stats->rs_flags & ATH9K_RX_2040)
+ rxs->flag |= RX_FLAG_40MHZ;
+ if (rx_stats->rs_flags & ATH9K_RX_GI)
+ rxs->flag |= RX_FLAG_SHORT_GI;
+ return rx_stats->rs_rate & 0x7f;
+ }
+
+ for (i = 0; i < sband->n_bitrates; i++) {
+ if (sband->bitrates[i].hw_value == rx_stats->rs_rate)
+ return i;
+ if (sband->bitrates[i].hw_value_short == rx_stats->rs_rate) {
+ rxs->flag |= RX_FLAG_SHORTPRE;
+ return i;
+ }
+ }
+
+ /* No valid hardware bitrate found -- we should not get here */
+ ath_print(common, ATH_DBG_XMIT, "unsupported hw bitrate detected "
+ "0x%02x using 1 Mbit\n", rx_stats->rs_rate);
+ if ((common->debug_mask & ATH_DBG_XMIT))
+ print_hex_dump_bytes("", DUMP_PREFIX_NONE, skb->data, skb->len);
+
+ return 0;
+}
+
+/*
+ * Theory for reporting quality:
+ *
+ * At a hardware RSSI of 45 you will be able to use MCS 7 reliably.
+ * At a hardware RSSI of 45 you will be able to use MCS 15 reliably.
+ * At a hardware RSSI of 35 you should be able use 54 Mbps reliably.
+ *
+ * MCS 7 is the highets MCS index usable by a 1-stream device.
+ * MCS 15 is the highest MCS index usable by a 2-stream device.
+ *
+ * All ath9k devices are either 1-stream or 2-stream.
+ *
+ * How many bars you see is derived from the qual reporting.
+ *
+ * A more elaborate scheme can be used here but it requires tables
+ * of SNR/throughput for each possible mode used. For the MCS table
+ * you can refer to the wireless wiki:
+ *
+ * http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n
+ *
+ */
+static int ath9k_compute_qual(struct ieee80211_hw *hw,
+ struct ath_rx_status *rx_stats)
+{
+ int qual;
+
+ if (conf_is_ht(&hw->conf))
+ qual = rx_stats->rs_rssi * 100 / 45;
+ else
+ qual = rx_stats->rs_rssi * 100 / 35;
+
+ /*
+ * rssi can be more than 45 though, anything above that
+ * should be considered at 100%
+ */
+ if (qual > 100)
+ qual = 100;
+
+ return qual;
+}
+
+static void ath9k_process_rssi(struct ath_common *common,
+ struct ieee80211_hw *hw,
+ struct sk_buff *skb,
+ struct ath_rx_status *rx_stats)
+{
+ struct ath_hw *ah = common->ah;
+ struct ieee80211_sta *sta;
+ struct ieee80211_hdr *hdr;
+ struct ath_node *an;
+ int last_rssi = ATH_RSSI_DUMMY_MARKER;
+ __le16 fc;
+
+ hdr = (struct ieee80211_hdr *)skb->data;
+ fc = hdr->frame_control;
+
+ rcu_read_lock();
+ /*
+ * XXX: use ieee80211_find_sta! This requires quite a bit of work
+ * under the current ath9k virtual wiphy implementation as we have
+ * no way of tying a vif to wiphy. Typically vifs are attached to
+ * at least one sdata of a wiphy on mac80211 but with ath9k virtual
+ * wiphy you'd have to iterate over every wiphy and each sdata.
+ */
+ sta = ieee80211_find_sta_by_hw(hw, hdr->addr2);
+ if (sta) {
+ an = (struct ath_node *) sta->drv_priv;
+ if (rx_stats->rs_rssi != ATH9K_RSSI_BAD &&
+ !rx_stats->rs_moreaggr)
+ ATH_RSSI_LPF(an->last_rssi, rx_stats->rs_rssi);
+ last_rssi = an->last_rssi;
+ }
+ rcu_read_unlock();
+
+ if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER))
+ rx_stats->rs_rssi = ATH_EP_RND(last_rssi,
+ ATH_RSSI_EP_MULTIPLIER);
+ if (rx_stats->rs_rssi < 0)
+ rx_stats->rs_rssi = 0;
+ else if (rx_stats->rs_rssi > 127)
+ rx_stats->rs_rssi = 127;
+
+ /* Update Beacon RSSI, this is used by ANI. */
+ if (ieee80211_is_beacon(fc))
+ ah->stats.avgbrssi = rx_stats->rs_rssi;
+}
+
+/*
+ * For Decrypt or Demic errors, we only mark packet status here and always push
+ * up the frame up to let mac80211 handle the actual error case, be it no
+ * decryption key or real decryption error. This let us keep statistics there.
+ */
+int ath9k_cmn_rx_skb_preprocess(struct ath_common *common,
+ struct ieee80211_hw *hw,
+ struct sk_buff *skb,
+ struct ath_rx_status *rx_stats,
+ struct ieee80211_rx_status *rx_status,
+ bool *decrypt_error)
+{
+ struct ath_hw *ah = common->ah;
+
+ if (!ath9k_rx_accept(common, skb, rx_status, rx_stats, decrypt_error))
+ return -EINVAL;
+
+ ath9k_process_rssi(common, hw, skb, rx_stats);
+
+ rx_status->rate_idx = ath9k_process_rate(common, hw,
+ rx_stats, rx_status, skb);
+ rx_status->mactime = ath9k_hw_extend_tsf(ah, rx_stats->rs_tstamp);
+ rx_status->band = hw->conf.channel->band;
+ rx_status->freq = hw->conf.channel->center_freq;
+ rx_status->noise = common->ani.noise_floor;
+ rx_status->signal = ATH_DEFAULT_NOISE_FLOOR + rx_stats->rs_rssi;
+ rx_status->antenna = rx_stats->rs_antenna;
+ rx_status->qual = ath9k_compute_qual(hw, rx_stats);
+ rx_status->flag |= RX_FLAG_TSFT;
+
+ return 0;
+}
+EXPORT_SYMBOL(ath9k_cmn_rx_skb_preprocess);
+
+void ath9k_cmn_rx_skb_postprocess(struct ath_common *common,
+ struct sk_buff *skb,
+ struct ath_rx_status *rx_stats,
+ struct ieee80211_rx_status *rxs,
+ bool decrypt_error)
+{
+ struct ath_hw *ah = common->ah;
+ struct ieee80211_hdr *hdr;
+ int hdrlen, padsize;
+ u8 keyix;
+ __le16 fc;
+
+ /* see if any padding is done by the hw and remove it */
+ hdr = (struct ieee80211_hdr *) skb->data;
+ hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+ fc = hdr->frame_control;
+
+ /* The MAC header is padded to have 32-bit boundary if the
+ * packet payload is non-zero. The general calculation for
+ * padsize would take into account odd header lengths:
+ * padsize = (4 - hdrlen % 4) % 4; However, since only
+ * even-length headers are used, padding can only be 0 or 2
+ * bytes and we can optimize this a bit. In addition, we must
+ * not try to remove padding from short control frames that do
+ * not have payload. */
+ padsize = hdrlen & 3;
+ if (padsize && hdrlen >= 24) {
+ memmove(skb->data + padsize, skb->data, hdrlen);
+ skb_pull(skb, padsize);
+ }
+
+ keyix = rx_stats->rs_keyix;
+
+ if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error) {
+ rxs->flag |= RX_FLAG_DECRYPTED;
+ } else if (ieee80211_has_protected(fc)
+ && !decrypt_error && skb->len >= hdrlen + 4) {
+ keyix = skb->data[hdrlen + 3] >> 6;
+
+ if (test_bit(keyix, common->keymap))
+ rxs->flag |= RX_FLAG_DECRYPTED;
+ }
+ if (ah->sw_mgmt_crypto &&
+ (rxs->flag & RX_FLAG_DECRYPTED) &&
+ ieee80211_is_mgmt(fc))
+ /* Use software decrypt for management frames. */
+ rxs->flag &= ~RX_FLAG_DECRYPTED;
+}
+EXPORT_SYMBOL(ath9k_cmn_rx_skb_postprocess);
+
+static int __init ath9k_cmn_init(void)
+{
+ return 0;
+}
+module_init(ath9k_cmn_init);
+
+static void __exit ath9k_cmn_exit(void)
+{
+ return;
+}
+module_exit(ath9k_cmn_exit);
diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h
new file mode 100644
index 0000000..292e3d8
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/common.h
@@ -0,0 +1,123 @@
+/*
+ * Copyright (c) 2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <net/mac80211.h>
+
+#include "../ath.h"
+#include "../debug.h"
+
+#include "hw.h"
+
+/* Common header for Atheros 802.11n base driver cores */
+
+#define WME_NUM_TID 16
+#define WME_BA_BMP_SIZE 64
+#define WME_MAX_BA WME_BA_BMP_SIZE
+#define ATH_TID_MAX_BUFS (2 * WME_MAX_BA)
+
+#define WME_AC_BE 0
+#define WME_AC_BK 1
+#define WME_AC_VI 2
+#define WME_AC_VO 3
+#define WME_NUM_AC 4
+
+#define ATH_RSSI_DUMMY_MARKER 0x127
+#define ATH_RSSI_LPF_LEN 10
+#define RSSI_LPF_THRESHOLD -20
+#define ATH_RSSI_EP_MULTIPLIER (1<<7)
+#define ATH_EP_MUL(x, mul) ((x) * (mul))
+#define ATH_RSSI_IN(x) (ATH_EP_MUL((x), ATH_RSSI_EP_MULTIPLIER))
+#define ATH_LPF_RSSI(x, y, len) \
+ ((x != ATH_RSSI_DUMMY_MARKER) ? (((x) * ((len) - 1) + (y)) / (len)) : (y))
+#define ATH_RSSI_LPF(x, y) do { \
+ if ((y) >= RSSI_LPF_THRESHOLD) \
+ x = ATH_LPF_RSSI((x), ATH_RSSI_IN((y)), ATH_RSSI_LPF_LEN); \
+} while (0)
+#define ATH_EP_RND(x, mul) \
+ ((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul))
+
+struct ath_atx_ac {
+ int sched;
+ int qnum;
+ struct list_head list;
+ struct list_head tid_q;
+};
+
+struct ath_buf_state {
+ int bfs_nframes;
+ u16 bfs_al;
+ u16 bfs_frmlen;
+ int bfs_seqno;
+ int bfs_tidno;
+ int bfs_retries;
+ u8 bf_type;
+ u32 bfs_keyix;
+ enum ath9k_key_type bfs_keytype;
+};
+
+struct ath_buf {
+ struct list_head list;
+ struct ath_buf *bf_lastbf; /* last buf of this unit (a frame or
+ an aggregate) */
+ struct ath_buf *bf_next; /* next subframe in the aggregate */
+ struct sk_buff *bf_mpdu; /* enclosing frame structure */
+ struct ath_desc *bf_desc; /* virtual addr of desc */
+ dma_addr_t bf_daddr; /* physical addr of desc */
+ dma_addr_t bf_buf_addr; /* physical addr of data buffer */
+ bool bf_stale;
+ u16 bf_flags;
+ struct ath_buf_state bf_state;
+ dma_addr_t bf_dmacontext;
+};
+
+struct ath_atx_tid {
+ struct list_head list;
+ struct list_head buf_q;
+ struct ath_node *an;
+ struct ath_atx_ac *ac;
+ struct ath_buf *tx_buf[ATH_TID_MAX_BUFS];
+ u16 seq_start;
+ u16 seq_next;
+ u16 baw_size;
+ int tidno;
+ int baw_head; /* first un-acked tx buffer */
+ int baw_tail; /* next unused tx buffer slot */
+ int sched;
+ int paused;
+ u8 state;
+};
+
+struct ath_node {
+ struct ath_common *common;
+ struct ath_atx_tid tid[WME_NUM_TID];
+ struct ath_atx_ac ac[WME_NUM_AC];
+ u16 maxampdu;
+ u8 mpdudensity;
+ int last_rssi;
+};
+
+int ath9k_cmn_rx_skb_preprocess(struct ath_common *common,
+ struct ieee80211_hw *hw,
+ struct sk_buff *skb,
+ struct ath_rx_status *rx_stats,
+ struct ieee80211_rx_status *rx_status,
+ bool *decrypt_error);
+
+void ath9k_cmn_rx_skb_postprocess(struct ath_common *common,
+ struct sk_buff *skb,
+ struct ath_rx_status *rx_stats,
+ struct ieee80211_rx_status *rxs,
+ bool decrypt_error);
diff --git a/drivers/net/wireless/ath/ath9k/rc.h b/drivers/net/wireless/ath/ath9k/rc.h
index fa21a62..94cb9f8 100644
--- a/drivers/net/wireless/ath/ath9k/rc.h
+++ b/drivers/net/wireless/ath/ath9k/rc.h
@@ -19,6 +19,8 @@
#ifndef RC_H
#define RC_H
+#include "hw.h"
+
struct ath_softc;
#define ATH_RATE_MAX 30
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 8b7489d..477365e 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -89,282 +89,6 @@ static void ath_setdefantenna(struct ath_softc *sc, u32 antenna)
sc->rx.rxotherant = 0;
}
-/* Assumes you've already done the endian to CPU conversion */
-static bool ath9k_rx_accept(struct ath_common *common,
- struct sk_buff *skb,
- struct ieee80211_rx_status *rxs,
- struct ath_rx_status *rx_stats,
- bool *decrypt_error)
-{
- struct ath_hw *ah = common->ah;
- struct ieee80211_hdr *hdr;
- __le16 fc;
-
- hdr = (struct ieee80211_hdr *) skb->data;
- fc = hdr->frame_control;
-
- if (!rx_stats->rs_datalen)
- return false;
- /*
- * rs_status follows rs_datalen so if rs_datalen is too large
- * we can take a hint that hardware corrupted it, so ignore
- * those frames.
- */
- if (rx_stats->rs_datalen > common->rx_bufsize)
- return false;
-
- if (rx_stats->rs_more) {
- /*
- * Frame spans multiple descriptors; this cannot happen yet
- * as we don't support jumbograms. If not in monitor mode,
- * discard the frame. Enable this if you want to see
- * error frames in Monitor mode.
- */
- if (ah->opmode != NL80211_IFTYPE_MONITOR)
- return false;
- } else if (rx_stats->rs_status != 0) {
- if (rx_stats->rs_status & ATH9K_RXERR_CRC)
- rxs->flag |= RX_FLAG_FAILED_FCS_CRC;
- if (rx_stats->rs_status & ATH9K_RXERR_PHY)
- return false;
-
- if (rx_stats->rs_status & ATH9K_RXERR_DECRYPT) {
- *decrypt_error = true;
- } else if (rx_stats->rs_status & ATH9K_RXERR_MIC) {
- if (ieee80211_is_ctl(fc))
- /*
- * Sometimes, we get invalid
- * MIC failures on valid control frames.
- * Remove these mic errors.
- */
- rx_stats->rs_status &= ~ATH9K_RXERR_MIC;
- else
- rxs->flag |= RX_FLAG_MMIC_ERROR;
- }
- /*
- * Reject error frames with the exception of
- * decryption and MIC failures. For monitor mode,
- * we also ignore the CRC error.
- */
- if (ah->opmode == NL80211_IFTYPE_MONITOR) {
- if (rx_stats->rs_status &
- ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC |
- ATH9K_RXERR_CRC))
- return false;
- } else {
- if (rx_stats->rs_status &
- ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC)) {
- return false;
- }
- }
- }
- return true;
-}
-
-static u8 ath9k_process_rate(struct ath_common *common,
- struct ieee80211_hw *hw,
- struct ath_rx_status *rx_stats,
- struct ieee80211_rx_status *rxs,
- struct sk_buff *skb)
-{
- struct ieee80211_supported_band *sband;
- enum ieee80211_band band;
- unsigned int i = 0;
-
- band = hw->conf.channel->band;
- sband = hw->wiphy->bands[band];
-
- if (rx_stats->rs_rate & 0x80) {
- /* HT rate */
- rxs->flag |= RX_FLAG_HT;
- if (rx_stats->rs_flags & ATH9K_RX_2040)
- rxs->flag |= RX_FLAG_40MHZ;
- if (rx_stats->rs_flags & ATH9K_RX_GI)
- rxs->flag |= RX_FLAG_SHORT_GI;
- return rx_stats->rs_rate & 0x7f;
- }
-
- for (i = 0; i < sband->n_bitrates; i++) {
- if (sband->bitrates[i].hw_value == rx_stats->rs_rate)
- return i;
- if (sband->bitrates[i].hw_value_short == rx_stats->rs_rate) {
- rxs->flag |= RX_FLAG_SHORTPRE;
- return i;
- }
- }
-
- /* No valid hardware bitrate found -- we should not get here */
- ath_print(common, ATH_DBG_XMIT, "unsupported hw bitrate detected "
- "0x%02x using 1 Mbit\n", rx_stats->rs_rate);
- if ((common->debug_mask & ATH_DBG_XMIT))
- print_hex_dump_bytes("", DUMP_PREFIX_NONE, skb->data, skb->len);
-
- return 0;
-}
-
-/*
- * Theory for reporting quality:
- *
- * At a hardware RSSI of 45 you will be able to use MCS 7 reliably.
- * At a hardware RSSI of 45 you will be able to use MCS 15 reliably.
- * At a hardware RSSI of 35 you should be able use 54 Mbps reliably.
- *
- * MCS 7 is the highets MCS index usable by a 1-stream device.
- * MCS 15 is the highest MCS index usable by a 2-stream device.
- *
- * All ath9k devices are either 1-stream or 2-stream.
- *
- * How many bars you see is derived from the qual reporting.
- *
- * A more elaborate scheme can be used here but it requires tables
- * of SNR/throughput for each possible mode used. For the MCS table
- * you can refer to the wireless wiki:
- *
- * http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n
- *
- */
-static int ath9k_compute_qual(struct ieee80211_hw *hw,
- struct ath_rx_status *rx_stats)
-{
- int qual;
-
- if (conf_is_ht(&hw->conf))
- qual = rx_stats->rs_rssi * 100 / 45;
- else
- qual = rx_stats->rs_rssi * 100 / 35;
-
- /*
- * rssi can be more than 45 though, anything above that
- * should be considered at 100%
- */
- if (qual > 100)
- qual = 100;
-
- return qual;
-}
-
-static void ath9k_process_rssi(struct ath_common *common,
- struct ieee80211_hw *hw,
- struct sk_buff *skb,
- struct ath_rx_status *rx_stats)
-{
- struct ath_hw *ah = common->ah;
- struct ieee80211_sta *sta;
- struct ieee80211_hdr *hdr;
- struct ath_node *an;
- int last_rssi = ATH_RSSI_DUMMY_MARKER;
- __le16 fc;
-
- hdr = (struct ieee80211_hdr *)skb->data;
- fc = hdr->frame_control;
-
- rcu_read_lock();
- /* XXX: use ieee80211_find_sta! */
- sta = ieee80211_find_sta_by_hw(hw, hdr->addr2);
- if (sta) {
- an = (struct ath_node *) sta->drv_priv;
- if (rx_stats->rs_rssi != ATH9K_RSSI_BAD &&
- !rx_stats->rs_moreaggr)
- ATH_RSSI_LPF(an->last_rssi, rx_stats->rs_rssi);
- last_rssi = an->last_rssi;
- }
- rcu_read_unlock();
-
- if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER))
- rx_stats->rs_rssi = ATH_EP_RND(last_rssi,
- ATH_RSSI_EP_MULTIPLIER);
- if (rx_stats->rs_rssi < 0)
- rx_stats->rs_rssi = 0;
- else if (rx_stats->rs_rssi > 127)
- rx_stats->rs_rssi = 127;
-
- /* Update Beacon RSSI, this is used by ANI. */
- if (ieee80211_is_beacon(fc))
- ah->stats.avgbrssi = rx_stats->rs_rssi;
-}
-
-/*
- * For Decrypt or Demic errors, we only mark packet status here and always push
- * up the frame up to let mac80211 handle the actual error case, be it no
- * decryption key or real decryption error. This let us keep statistics there.
- */
-static int ath9k_rx_skb_preprocess(struct ath_common *common,
- struct ieee80211_hw *hw,
- struct sk_buff *skb,
- struct ath_rx_status *rx_stats,
- struct ieee80211_rx_status *rx_status,
- bool *decrypt_error)
-{
- struct ath_hw *ah = common->ah;
-
- if (!ath9k_rx_accept(common, skb, rx_status, rx_stats, decrypt_error))
- return -EINVAL;
-
- ath9k_process_rssi(common, hw, skb, rx_stats);
-
- rx_status->rate_idx = ath9k_process_rate(common, hw,
- rx_stats, rx_status, skb);
- rx_status->mactime = ath9k_hw_extend_tsf(ah, rx_stats->rs_tstamp);
- rx_status->band = hw->conf.channel->band;
- rx_status->freq = hw->conf.channel->center_freq;
- rx_status->noise = common->ani.noise_floor;
- rx_status->signal = ATH_DEFAULT_NOISE_FLOOR + rx_stats->rs_rssi;
- rx_status->antenna = rx_stats->rs_antenna;
- rx_status->qual = ath9k_compute_qual(hw, rx_stats);
- rx_status->flag |= RX_FLAG_TSFT;
-
- return 0;
-}
-
-static void ath9k_rx_skb_postprocess(struct ath_common *common,
- struct sk_buff *skb,
- struct ath_rx_status *rx_stats,
- struct ieee80211_rx_status *rxs,
- bool decrypt_error)
-{
- struct ath_hw *ah = common->ah;
- struct ieee80211_hdr *hdr;
- int hdrlen, padsize;
- u8 keyix;
- __le16 fc;
-
- /* see if any padding is done by the hw and remove it */
- hdr = (struct ieee80211_hdr *) skb->data;
- hdrlen = ieee80211_get_hdrlen_from_skb(skb);
- fc = hdr->frame_control;
-
- /* The MAC header is padded to have 32-bit boundary if the
- * packet payload is non-zero. The general calculation for
- * padsize would take into account odd header lengths:
- * padsize = (4 - hdrlen % 4) % 4; However, since only
- * even-length headers are used, padding can only be 0 or 2
- * bytes and we can optimize this a bit. In addition, we must
- * not try to remove padding from short control frames that do
- * not have payload. */
- padsize = hdrlen & 3;
- if (padsize && hdrlen >= 24) {
- memmove(skb->data + padsize, skb->data, hdrlen);
- skb_pull(skb, padsize);
- }
-
- keyix = rx_stats->rs_keyix;
-
- if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error) {
- rxs->flag |= RX_FLAG_DECRYPTED;
- } else if (ieee80211_has_protected(fc)
- && !decrypt_error && skb->len >= hdrlen + 4) {
- keyix = skb->data[hdrlen + 3] >> 6;
-
- if (test_bit(keyix, common->keymap))
- rxs->flag |= RX_FLAG_DECRYPTED;
- }
- if (ah->sw_mgmt_crypto &&
- (rxs->flag & RX_FLAG_DECRYPTED) &&
- ieee80211_is_mgmt(fc))
- /* Use software decrypt for management frames. */
- rxs->flag &= ~RX_FLAG_DECRYPTED;
-}
-
static void ath_opmode_init(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
@@ -854,8 +578,8 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
if (flush)
goto requeue;
- retval = ath9k_rx_skb_preprocess(common, hw, skb, rx_stats,
- rxs, &decrypt_error);
+ retval = ath9k_cmn_rx_skb_preprocess(common, hw, skb, rx_stats,
+ rxs, &decrypt_error);
if (retval)
goto requeue;
@@ -877,8 +601,8 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
skb_put(skb, rx_stats->rs_datalen);
- ath9k_rx_skb_postprocess(common, skb, rx_stats,
- rxs, decrypt_error);
+ ath9k_cmn_rx_skb_postprocess(common, skb, rx_stats,
+ rxs, decrypt_error);
/* We will now give hardware our shiny new allocated skb */
bf->bf_mpdu = requeue_skb;
generated by cgit v0.10.2 at 2024-11-07 16:27:07 (GMT)