3 files changed, 39 insertions, 4 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 70b6a05..97b3d32 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -246,8 +246,37 @@ enum {
 	BNX2X_MAX_CNIC_ETH_CL_ID_IDX,
 };
 
-#define BNX2X_CNIC_START_ETH_CID(bp)	(BNX2X_NUM_NON_CNIC_QUEUES(bp) *\
+/* use a value high enough to be above all the PFs, which has least significant
+ * nibble as 8, so when cnic needs to come up with a CID for UIO to use to
+ * calculate doorbell address according to old doorbell configuration scheme
+ * (db_msg_sz 1 << 7 * cid + 0x40 DPM offset) it can come up with a valid number
+ * We must avoid coming up with cid 8 for iscsi since according to this method
+ * the designated UIO cid will come out 0 and it has a special handling for that
+ * case which doesn't suit us. Therefore will will cieling to closes cid which
+ * has least signigifcant nibble 8 and if it is 8 we will move forward to 0x18.
+ */
+
+#define BNX2X_1st_NON_L2_ETH_CID(bp)	(BNX2X_NUM_NON_CNIC_QUEUES(bp) * \
 					 (bp)->max_cos)
+/* amount of cids traversed by UIO's DPM addition to doorbell */
+#define UIO_DPM				8
+/* roundup to DPM offset */
+#define UIO_ROUNDUP(bp)			(roundup(BNX2X_1st_NON_L2_ETH_CID(bp), \
+					 UIO_DPM))
+/* offset to nearest value which has lsb nibble matching DPM */
+#define UIO_CID_OFFSET(bp)		((UIO_ROUNDUP(bp) + UIO_DPM) % \
+					 (UIO_DPM * 2))
+/* add offset to rounded-up cid to get a value which could be used with UIO */
+#define UIO_DPM_ALIGN(bp)		(UIO_ROUNDUP(bp) + UIO_CID_OFFSET(bp))
+/* but wait - avoid UIO special case for cid 0 */
+#define UIO_DPM_CID0_OFFSET(bp)		((UIO_DPM * 2) * \
+					 (UIO_DPM_ALIGN(bp) == UIO_DPM))
+/* Properly DPM aligned CID dajusted to cid 0 secal case */
+#define BNX2X_CNIC_START_ETH_CID(bp)	(UIO_DPM_ALIGN(bp) + \
+					 (UIO_DPM_CID0_OFFSET(bp)))
+/* how many cids were wasted  - need this value for cid allocation */
+#define UIO_CID_PAD(bp)			(BNX2X_CNIC_START_ETH_CID(bp) - \
+					 BNX2X_1st_NON_L2_ETH_CID(bp))
 	/* iSCSI L2 */
 #define	BNX2X_ISCSI_ETH_CID(bp)		(BNX2X_CNIC_START_ETH_CID(bp))
 	/* FCoE L2 */
@@ -1680,10 +1709,11 @@ struct bnx2x {
  * Maximum CID count that might be required by the bnx2x:
  * Max RSS * Max_Tx_Multi_Cos + FCoE + iSCSI
  */
+
 #define BNX2X_L2_CID_COUNT(bp)	(BNX2X_NUM_ETH_QUEUES(bp) * BNX2X_MULTI_TX_COS \
-				+ 2 * CNIC_SUPPORT(bp))
+				+ CNIC_SUPPORT(bp) * (2 + UIO_CID_PAD(bp)))
 #define BNX2X_L2_MAX_CID(bp)	(BNX2X_MAX_RSS_COUNT(bp) * BNX2X_MULTI_TX_COS \
-				+ 2 * CNIC_SUPPORT(bp))
+				+ CNIC_SUPPORT(bp) * (2 + UIO_CID_PAD(bp)))
 #define L2_ILT_LINES(bp)	(DIV_ROUND_UP(BNX2X_L2_CID_COUNT(bp),\
 					ILT_PAGE_CIDS))
 
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 62c59ed..a6704b5 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -13632,6 +13632,10 @@ void bnx2x_setup_cnic_info(struct bnx2x *bp)
 	cp->fcoe_init_cid = BNX2X_FCOE_ETH_CID(bp);
 	cp->iscsi_l2_cid = BNX2X_ISCSI_ETH_CID(bp);
 
+	DP(NETIF_MSG_IFUP, "BNX2X_1st_NON_L2_ETH_CID(bp) %x, cp->starting_cid %x, cp->fcoe_init_cid %x, cp->iscsi_l2_cid %x\n",
+	   BNX2X_1st_NON_L2_ETH_CID(bp), cp->starting_cid, cp->fcoe_init_cid,
+	   cp->iscsi_l2_cid);
+
 	if (NO_ISCSI_OOO(bp))
 		cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO;
 }
diff --git a/drivers/net/ethernet/broadcom/cnic.c b/drivers/net/ethernet/broadcom/cnic.c
index 8142480..93da16b 100644
--- a/drivers/net/ethernet/broadcom/cnic.c
+++ b/drivers/net/ethernet/broadcom/cnic.c
@@ -5217,7 +5217,8 @@ static void cnic_init_rings(struct cnic_dev *dev)
 				"iSCSI CLIENT_SETUP did not complete\n");
 		cnic_spq_completion(dev, DRV_CTL_RET_L2_SPQ_CREDIT_CMD, 1);
 		cnic_ring_ctl(dev, cid, cli, 1);
-		*cid_ptr = cid;
+		*cid_ptr = cid >> 4;
+		*(cid_ptr + 1) = cid * bp->db_size;
 	}
 }