diff options
Diffstat (limited to 'drivers/pci/msi.h')
| -rw-r--r-- | drivers/pci/msi.h | 133 |
1 files changed, 71 insertions, 62 deletions
diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h index 4ac52d4..56951c3 100644 --- a/drivers/pci/msi.h +++ b/drivers/pci/msi.h @@ -6,6 +6,68 @@ #ifndef MSI_H #define MSI_H +/* + * MSI operation vector. Used by the msi core code (drivers/pci/msi.c) + * to abstract platform-specific tasks relating to MSI address generation + * and resource management. + */ +struct msi_ops { + /** + * setup - generate an MSI bus address and data for a given vector + * @pdev: PCI device context (in) + * @vector: vector allocated by the msi core (in) + * @addr_hi: upper 32 bits of PCI bus MSI address (out) + * @addr_lo: lower 32 bits of PCI bus MSI address (out) + * @data: MSI data payload (out) + * + * Description: The setup op is used to generate a PCI bus addres and + * data which the msi core will program into the card MSI capability + * registers. The setup routine is responsible for picking an initial + * cpu to target the MSI at. The setup routine is responsible for + * examining pdev to determine the MSI capabilities of the card and + * generating a suitable address/data. The setup routine is + * responsible for allocating and tracking any system resources it + * needs to route the MSI to the cpu it picks, and for associating + * those resources with the passed in vector. + * + * Returns 0 if the MSI address/data was successfully setup. + **/ + + int (*setup) (struct pci_dev *pdev, unsigned int vector, + u32 *addr_hi, u32 *addr_lo, u32 *data); + + /** + * teardown - release resources allocated by setup + * @vector: vector context for resources (in) + * + * Description: The teardown op is used to release any resources + * that were allocated in the setup routine associated with the passed + * in vector. + **/ + + void (*teardown) (unsigned int vector); + + /** + * target - retarget an MSI at a different cpu + * @vector: vector context for resources (in) + * @cpu: new cpu to direct vector at (in) + * @addr_hi: new value of PCI bus upper 32 bits (in/out) + * @addr_lo: new value of PCI bus lower 32 bits (in/out) + * + * Description: The target op is used to redirect an MSI vector + * at a different cpu. addr_hi/addr_lo coming in are the existing + * values that the MSI core has programmed into the card. The + * target code is responsible for freeing any resources (if any) + * associated with the old address, and generating a new PCI bus + * addr_hi/addr_lo that will redirect the vector at the indicated cpu. + **/ + + void (*target) (unsigned int vector, unsigned int cpu, + u32 *addr_hi, u32 *addr_lo); +}; + +extern int msi_register(struct msi_ops *ops); + #include <asm/msi.h> /* @@ -63,67 +125,6 @@ extern int pci_vector_resources(int last, int nr_released); #define msix_mask(address) (address | PCI_MSIX_FLAGS_BITMASK) #define msix_is_pending(address) (address & PCI_MSIX_FLAGS_PENDMASK) -/* - * MSI Defined Data Structures - */ -#define MSI_ADDRESS_HEADER 0xfee -#define MSI_ADDRESS_HEADER_SHIFT 12 -#define MSI_ADDRESS_HEADER_MASK 0xfff000 -#define MSI_ADDRESS_DEST_ID_MASK 0xfff0000f -#define MSI_TARGET_CPU_MASK 0xff -#define MSI_DELIVERY_MODE 0 -#define MSI_LEVEL_MODE 1 /* Edge always assert */ -#define MSI_TRIGGER_MODE 0 /* MSI is edge sensitive */ -#define MSI_PHYSICAL_MODE 0 -#define MSI_LOGICAL_MODE 1 -#define MSI_REDIRECTION_HINT_MODE 0 - -struct msg_data { -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u32 vector : 8; - __u32 delivery_mode : 3; /* 000b: FIXED | 001b: lowest prior */ - __u32 reserved_1 : 3; - __u32 level : 1; /* 0: deassert | 1: assert */ - __u32 trigger : 1; /* 0: edge | 1: level */ - __u32 reserved_2 : 16; -#elif defined(__BIG_ENDIAN_BITFIELD) - __u32 reserved_2 : 16; - __u32 trigger : 1; /* 0: edge | 1: level */ - __u32 level : 1; /* 0: deassert | 1: assert */ - __u32 reserved_1 : 3; - __u32 delivery_mode : 3; /* 000b: FIXED | 001b: lowest prior */ - __u32 vector : 8; -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif -} __attribute__ ((packed)); - -struct msg_address { - union { - struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u32 reserved_1 : 2; - __u32 dest_mode : 1; /*0:physic | 1:logic */ - __u32 redirection_hint: 1; /*0: dedicated CPU - 1: lowest priority */ - __u32 reserved_2 : 4; - __u32 dest_id : 24; /* Destination ID */ -#elif defined(__BIG_ENDIAN_BITFIELD) - __u32 dest_id : 24; /* Destination ID */ - __u32 reserved_2 : 4; - __u32 redirection_hint: 1; /*0: dedicated CPU - 1: lowest priority */ - __u32 dest_mode : 1; /*0:physic | 1:logic */ - __u32 reserved_1 : 2; -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif - }u; - __u32 value; - }lo_address; - __u32 hi_address; -} __attribute__ ((packed)); - struct msi_desc { struct { __u8 type : 5; /* {0: unused, 5h:MSI, 11h:MSI-X} */ @@ -132,7 +133,7 @@ struct msi_desc { __u8 reserved: 1; /* reserved */ __u8 entry_nr; /* specific enabled entry */ __u8 default_vector; /* default pre-assigned vector */ - __u8 current_cpu; /* current destination cpu */ + __u8 unused; /* formerly unused destination cpu*/ }msi_attrib; struct { @@ -142,6 +143,14 @@ struct msi_desc { void __iomem *mask_base; struct pci_dev *dev; + +#ifdef CONFIG_PM + /* PM save area for MSIX address/data */ + + u32 address_hi_save; + u32 address_lo_save; + u32 data_save; +#endif }; #endif /* MSI_H */ |