diff options
Diffstat (limited to 'drivers/regulator/ab8500.c')
-rw-r--r-- | drivers/regulator/ab8500.c | 161 |
1 files changed, 82 insertions, 79 deletions
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index 9a3dc79..ccb0bfd 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -3,18 +3,13 @@ * * License Terms: GNU General Public License v2 * - * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson + * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson + * Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson * * AB8500 peripheral regulators * - * AB8500 supports the following regulators, - * LDOs - VAUDIO, VANAMIC2/2, VDIGMIC, VINTCORE12, VTVOUT, - * VAUX1/2/3, VANA - * - * for DB8500 cut 1.0 and previous versions of the silicon, all accesses - * to registers are through the DB8500 SPI. In cut 1.1 onwards, these - * accesses are through the DB8500 PRCMU I2C - * + * AB8500 supports the following regulators: + * VAUX1/2/3, VINTCORE, VTVOUT, VAUDIO, VAMIC1/2, VDMIC, VANA */ #include <linux/init.h> #include <linux/kernel.h> @@ -28,6 +23,7 @@ /** * struct ab8500_regulator_info - ab8500 regulator information + * @dev: device pointer * @desc: regulator description * @regulator_dev: regulator device * @max_uV: maximum voltage (for variable voltage supplies) @@ -35,12 +31,12 @@ * @fixed_uV: typical voltage (for fixed voltage supplies) * @update_bank: bank to control on/off * @update_reg: register to control on/off - * @mask: mask to enable/disable regulator - * @enable: bits to enable the regulator in normal(high power) mode + * @update_mask: mask to enable/disable regulator + * @update_val_enable: bits to enable the regulator in normal (high power) mode * @voltage_bank: bank to control regulator voltage * @voltage_reg: register to control regulator voltage * @voltage_mask: mask to control regulator voltage - * @supported_voltages: supported voltage table + * @voltages: supported voltage table * @voltages_len: number of supported voltages for the regulator */ struct ab8500_regulator_info { @@ -52,12 +48,12 @@ struct ab8500_regulator_info { int fixed_uV; u8 update_bank; u8 update_reg; - u8 mask; - u8 enable; + u8 update_mask; + u8 update_val_enable; u8 voltage_bank; u8 voltage_reg; u8 voltage_mask; - int const *supported_voltages; + int const *voltages; int voltages_len; }; @@ -112,7 +108,8 @@ static int ab8500_regulator_enable(struct regulator_dev *rdev) return -EINVAL; ret = abx500_mask_and_set_register_interruptible(info->dev, - info->update_bank, info->update_reg, info->mask, info->enable); + info->update_bank, info->update_reg, + info->update_mask, info->update_val_enable); if (ret < 0) dev_err(rdev_get_dev(rdev), "couldn't set enable bits for regulator\n"); @@ -129,7 +126,8 @@ static int ab8500_regulator_disable(struct regulator_dev *rdev) return -EINVAL; ret = abx500_mask_and_set_register_interruptible(info->dev, - info->update_bank, info->update_reg, info->mask, 0x0); + info->update_bank, info->update_reg, + info->update_mask, 0x0); if (ret < 0) dev_err(rdev_get_dev(rdev), "couldn't set disable bits for regulator\n"); @@ -154,7 +152,7 @@ static int ab8500_regulator_is_enabled(struct regulator_dev *rdev) return ret; } - if (value & info->mask) + if (value & info->update_mask) return true; else return false; @@ -176,7 +174,7 @@ static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector) if (selector >= info->voltages_len) return -EINVAL; - return info->supported_voltages[selector]; + return info->voltages[selector]; } static int ab8500_regulator_get_voltage(struct regulator_dev *rdev) @@ -200,9 +198,9 @@ static int ab8500_regulator_get_voltage(struct regulator_dev *rdev) /* vintcore has a different layout */ value &= info->voltage_mask; if (regulator_id == AB8500_LDO_INTCORE) - ret = info->supported_voltages[value >> 0x3]; + ret = info->voltages[value >> 0x3]; else - ret = info->supported_voltages[value]; + ret = info->voltages[value]; return ret; } @@ -215,8 +213,8 @@ static int ab8500_get_best_voltage_index(struct regulator_dev *rdev, /* check the supported voltage */ for (i = 0; i < info->voltages_len; i++) { - if ((info->supported_voltages[i] >= min_uV) && - (info->supported_voltages[i] <= max_uV)) + if ((info->voltages[i] >= min_uV) && + (info->voltages[i] <= max_uV)) return i; } @@ -284,74 +282,79 @@ static struct regulator_ops ab8500_ldo_fixed_ops = { .list_voltage = ab8500_list_voltage, }; -#define AB8500_LDO(_id, min, max, bank, reg, reg_mask, \ - reg_enable, volt_bank, volt_reg, volt_mask, \ - voltages, len_volts) \ -{ \ +#define AB8500_LDO(_id, _min_mV, _max_mV, \ + _u_bank, _u_reg, _u_mask, _u_val_enable, \ + _v_bank, _v_reg, _v_mask, _v_table, _v_table_len) \ +[AB8500_LDO_##_id] = { \ .desc = { \ - .name = "LDO-" #_id, \ - .ops = &ab8500_regulator_ops, \ - .type = REGULATOR_VOLTAGE, \ - .id = AB8500_LDO_##_id, \ - .owner = THIS_MODULE, \ + .name = "LDO-" #_id, \ + .ops = &ab8500_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = AB8500_LDO_##_id, \ + .owner = THIS_MODULE, \ }, \ - .min_uV = (min) * 1000, \ - .max_uV = (max) * 1000, \ - .update_bank = bank, \ - .update_reg = reg, \ - .mask = reg_mask, \ - .enable = reg_enable, \ - .voltage_bank = volt_bank, \ - .voltage_reg = volt_reg, \ - .voltage_mask = volt_mask, \ - .supported_voltages = voltages, \ - .voltages_len = len_volts, \ - .fixed_uV = 0, \ + .min_uV = (_min_mV) * 1000, \ + .max_uV = (_max_mV) * 1000, \ + .update_bank = _u_bank, \ + .update_reg = _u_reg, \ + .update_mask = _u_mask, \ + .update_val_enable = _u_val_enable, \ + .voltage_bank = _v_bank, \ + .voltage_reg = _v_reg, \ + .voltage_mask = _v_mask, \ + .voltages = _v_table, \ + .voltages_len = _v_table_len, \ + .fixed_uV = 0, \ } -#define AB8500_FIXED_LDO(_id, fixed, bank, reg, \ - reg_mask, reg_enable) \ -{ \ - .desc = { \ - .name = "LDO-" #_id, \ - .ops = &ab8500_ldo_fixed_ops, \ - .type = REGULATOR_VOLTAGE, \ - .id = AB8500_LDO_##_id, \ - .owner = THIS_MODULE, \ - }, \ - .fixed_uV = fixed * 1000, \ - .update_bank = bank, \ - .update_reg = reg, \ - .mask = reg_mask, \ - .enable = reg_enable, \ +#define AB8500_FIXED_LDO(_id, _fixed_mV, \ + _u_bank, _u_reg, _u_mask, _u_val_enable) \ +[AB8500_LDO_##_id] = { \ + .desc = { \ + .name = "LDO-" #_id, \ + .ops = &ab8500_ldo_fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = AB8500_LDO_##_id, \ + .owner = THIS_MODULE, \ + }, \ + .fixed_uV = (_fixed_mV) * 1000, \ + .update_bank = _u_bank, \ + .update_reg = _u_reg, \ + .update_mask = _u_mask, \ + .update_val_enable = _u_val_enable, \ } static struct ab8500_regulator_info ab8500_regulator_info[] = { /* - * Variable Voltage LDOs - * name, min uV, max uV, ctrl bank, ctrl reg, reg mask, enable mask, - * volt ctrl bank, volt ctrl reg, volt ctrl mask, volt table, - * num supported volts + * Variable Voltage Regulators + * name, min mV, max mV, + * update bank, reg, mask, enable val + * volt bank, reg, mask, table, table length */ - AB8500_LDO(AUX1, 1100, 3300, 0x04, 0x09, 0x3, 0x1, 0x04, 0x1f, 0xf, - ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)), - AB8500_LDO(AUX2, 1100, 3300, 0x04, 0x09, 0xc, 0x4, 0x04, 0x20, 0xf, - ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)), - AB8500_LDO(AUX3, 1100, 3300, 0x04, 0x0a, 0x3, 0x1, 0x04, 0x21, 0x7, - ldo_vaux3_voltages, ARRAY_SIZE(ldo_vaux3_voltages)), - AB8500_LDO(INTCORE, 1100, 3300, 0x03, 0x80, 0x44, 0x4, 0x03, 0x80, 0x38, + AB8500_LDO(AUX1, 1100, 3300, + 0x04, 0x09, 0x03, 0x01, 0x04, 0x1f, 0x0f, + ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)), + AB8500_LDO(AUX2, 1100, 3300, + 0x04, 0x09, 0x0c, 0x04, 0x04, 0x20, 0x0f, + ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)), + AB8500_LDO(AUX3, 1100, 3300, + 0x04, 0x0a, 0x03, 0x01, 0x04, 0x21, 0x07, + ldo_vaux3_voltages, ARRAY_SIZE(ldo_vaux3_voltages)), + AB8500_LDO(INTCORE, 1100, 3300, + 0x03, 0x80, 0x44, 0x04, 0x03, 0x80, 0x38, ldo_vintcore_voltages, ARRAY_SIZE(ldo_vintcore_voltages)), /* - * Fixed Voltage LDOs - * name, o/p uV, ctrl bank, ctrl reg, enable, disable + * Fixed Voltage Regulators + * name, fixed mV, + * update bank, reg, mask, enable val */ - AB8500_FIXED_LDO(TVOUT, 2000, 0x03, 0x80, 0x82, 0x2), - AB8500_FIXED_LDO(AUDIO, 2000, 0x03, 0x83, 0x2, 0x2), - AB8500_FIXED_LDO(ANAMIC1, 2050, 0x03, 0x83, 0x08, 0x08), - AB8500_FIXED_LDO(ANAMIC2, 2050, 0x03, 0x83, 0x10, 0x10), - AB8500_FIXED_LDO(DMIC, 1800, 0x03, 0x83, 0x04, 0x04), - AB8500_FIXED_LDO(ANA, 1200, 0x04, 0x06, 0xc, 0x4), + AB8500_FIXED_LDO(TVOUT, 2000, 0x03, 0x80, 0x82, 0x02), + AB8500_FIXED_LDO(AUDIO, 2000, 0x03, 0x83, 0x02, 0x02), + AB8500_FIXED_LDO(ANAMIC1, 2050, 0x03, 0x83, 0x08, 0x08), + AB8500_FIXED_LDO(ANAMIC2, 2050, 0x03, 0x83, 0x10, 0x10), + AB8500_FIXED_LDO(DMIC, 1800, 0x03, 0x83, 0x04, 0x04), + AB8500_FIXED_LDO(ANA, 1200, 0x04, 0x06, 0x0c, 0x04), }; static __devinit int ab8500_regulator_probe(struct platform_device *pdev) @@ -385,7 +388,7 @@ static __devinit int ab8500_regulator_probe(struct platform_device *pdev) if (info->desc.id == AB8500_LDO_AUX3) { info->desc.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages); - info->supported_voltages = ldo_vauxn_voltages; + info->voltages = ldo_vauxn_voltages; info->voltages_len = ARRAY_SIZE(ldo_vauxn_voltages); info->voltage_mask = 0xf; |