diff options
Diffstat (limited to 'drivers/s390/net/iucv.c')
| -rw-r--r-- | drivers/s390/net/iucv.c | 2540 |
1 files changed, 0 insertions, 2540 deletions
diff --git a/drivers/s390/net/iucv.c b/drivers/s390/net/iucv.c deleted file mode 100644 index 1476ce2..0000000 --- a/drivers/s390/net/iucv.c +++ /dev/null @@ -1,2540 +0,0 @@ -/* - * IUCV network driver - * - * Copyright (C) 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): - * Original source: - * Alan Altmark (Alan_Altmark@us.ibm.com) Sept. 2000 - * Xenia Tkatschow (xenia@us.ibm.com) - * 2Gb awareness and general cleanup: - * Fritz Elfert (elfert@de.ibm.com, felfert@millenux.com) - * - * Documentation used: - * The original source - * CP Programming Service, IBM document # SC24-5760 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -/* #define DEBUG */ - -#include <linux/module.h> -#include <linux/moduleparam.h> - -#include <linux/spinlock.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <asm/atomic.h> -#include "iucv.h" -#include <asm/io.h> -#include <asm/s390_ext.h> -#include <asm/ebcdic.h> -#include <asm/smp.h> -#include <asm/s390_rdev.h> - -/* FLAGS: - * All flags are defined in the field IPFLAGS1 of each function - * and can be found in CP Programming Services. - * IPSRCCLS - Indicates you have specified a source class - * IPFGMCL - Indicates you have specified a target class - * IPFGPID - Indicates you have specified a pathid - * IPFGMID - Indicates you have specified a message ID - * IPANSLST - Indicates that you are using an address list for - * reply data - * IPBUFLST - Indicates that you are using an address list for - * message data - */ - -#define IPSRCCLS 0x01 -#define IPFGMCL 0x01 -#define IPFGPID 0x02 -#define IPFGMID 0x04 -#define IPANSLST 0x08 -#define IPBUFLST 0x40 - -static int -iucv_bus_match (struct device *dev, struct device_driver *drv) -{ - return 0; -} - -struct bus_type iucv_bus = { - .name = "iucv", - .match = iucv_bus_match, -}; - -struct device *iucv_root; - -/* General IUCV interrupt structure */ -typedef struct { - __u16 ippathid; - __u8 res1; - __u8 iptype; - __u32 res2; - __u8 ipvmid[8]; - __u8 res3[24]; -} iucv_GeneralInterrupt; - -static iucv_GeneralInterrupt *iucv_external_int_buffer = NULL; - -/* Spin Lock declaration */ - -static DEFINE_SPINLOCK(iucv_lock); - -static int messagesDisabled = 0; - -/***************INTERRUPT HANDLING ***************/ - -typedef struct { - struct list_head queue; - iucv_GeneralInterrupt data; -} iucv_irqdata; - -static struct list_head iucv_irq_queue; -static DEFINE_SPINLOCK(iucv_irq_queue_lock); - -/* - *Internal function prototypes - */ -static void iucv_tasklet_handler(unsigned long); -static void iucv_irq_handler(__u16); - -static DECLARE_TASKLET(iucv_tasklet,iucv_tasklet_handler,0); - -/************ FUNCTION ID'S ****************************/ - -#define ACCEPT 10 -#define CONNECT 11 -#define DECLARE_BUFFER 12 -#define PURGE 9 -#define QUERY 0 -#define QUIESCE 13 -#define RECEIVE 5 -#define REJECT 8 -#define REPLY 6 -#define RESUME 14 -#define RETRIEVE_BUFFER 2 -#define SEND 4 -#define SETMASK 16 -#define SEVER 15 - -/** - * Structure: handler - * members: list - list management. - * structure: id - * userid - 8 char array of machine identification - * user_data - 16 char array for user identification - * mask - 24 char array used to compare the 2 previous - * interrupt_table - vector of interrupt functions. - * pgm_data - ulong, application data that is passed - * to the interrupt handlers -*/ -typedef struct handler_t { - struct list_head list; - struct { - __u8 userid[8]; - __u8 user_data[16]; - __u8 mask[24]; - } id; - iucv_interrupt_ops_t *interrupt_table; - void *pgm_data; -} handler; - -/** - * iucv_handler_table: List of registered handlers. - */ -static struct list_head iucv_handler_table; - -/** - * iucv_pathid_table: an array of *handler pointing into - * iucv_handler_table for fast indexing by pathid; - */ -static handler **iucv_pathid_table; - -static unsigned long max_connections; - -/** - * iucv_cpuid: contains the logical cpu number of the cpu which - * has declared the iucv buffer by issuing DECLARE_BUFFER. - * If no cpu has done the initialization iucv_cpuid contains -1. - */ -static int iucv_cpuid = -1; -/** - * register_flag: is 0 when external interrupt has not been registered - */ -static int register_flag; - -/****************FIVE 40-BYTE PARAMETER STRUCTURES******************/ -/* Data struct 1: iparml_control - * Used for iucv_accept - * iucv_connect - * iucv_quiesce - * iucv_resume - * iucv_sever - * iucv_retrieve_buffer - * Data struct 2: iparml_dpl (data in parameter list) - * Used for iucv_send_prmmsg - * iucv_send2way_prmmsg - * iucv_send2way_prmmsg_array - * iucv_reply_prmmsg - * Data struct 3: iparml_db (data in a buffer) - * Used for iucv_receive - * iucv_receive_array - * iucv_reject - * iucv_reply - * iucv_reply_array - * iucv_send - * iucv_send_array - * iucv_send2way - * iucv_send2way_array - * iucv_declare_buffer - * Data struct 4: iparml_purge - * Used for iucv_purge - * iucv_query - * Data struct 5: iparml_set_mask - * Used for iucv_set_mask - */ - -typedef struct { - __u16 ippathid; - __u8 ipflags1; - __u8 iprcode; - __u16 ipmsglim; - __u16 res1; - __u8 ipvmid[8]; - __u8 ipuser[16]; - __u8 iptarget[8]; -} iparml_control; - -typedef struct { - __u16 ippathid; - __u8 ipflags1; - __u8 iprcode; - __u32 ipmsgid; - __u32 iptrgcls; - __u8 iprmmsg[8]; - __u32 ipsrccls; - __u32 ipmsgtag; - __u32 ipbfadr2; - __u32 ipbfln2f; - __u32 res; -} iparml_dpl; - -typedef struct { - __u16 ippathid; - __u8 ipflags1; - __u8 iprcode; - __u32 ipmsgid; - __u32 iptrgcls; - __u32 ipbfadr1; - __u32 ipbfln1f; - __u32 ipsrccls; - __u32 ipmsgtag; - __u32 ipbfadr2; - __u32 ipbfln2f; - __u32 res; -} iparml_db; - -typedef struct { - __u16 ippathid; - __u8 ipflags1; - __u8 iprcode; - __u32 ipmsgid; - __u8 ipaudit[3]; - __u8 res1[5]; - __u32 res2; - __u32 ipsrccls; - __u32 ipmsgtag; - __u32 res3[3]; -} iparml_purge; - -typedef struct { - __u8 ipmask; - __u8 res1[2]; - __u8 iprcode; - __u32 res2[9]; -} iparml_set_mask; - -typedef struct { - union { - iparml_control p_ctrl; - iparml_dpl p_dpl; - iparml_db p_db; - iparml_purge p_purge; - iparml_set_mask p_set_mask; - } param; - atomic_t in_use; - __u32 res; -} __attribute__ ((aligned(8))) iucv_param; -#define PARAM_POOL_SIZE (PAGE_SIZE / sizeof(iucv_param)) - -static iucv_param * iucv_param_pool; - -MODULE_AUTHOR("(C) 2001 IBM Corp. by Fritz Elfert (felfert@millenux.com)"); -MODULE_DESCRIPTION("Linux for S/390 IUCV lowlevel driver"); -MODULE_LICENSE("GPL"); - -/* - * Debugging stuff - *******************************************************************************/ - - -#ifdef DEBUG -static int debuglevel = 0; - -module_param(debuglevel, int, 0); -MODULE_PARM_DESC(debuglevel, - "Specifies the debug level (0=off ... 3=all)"); - -static void -iucv_dumpit(char *title, void *buf, int len) -{ - int i; - __u8 *p = (__u8 *)buf; - - if (debuglevel < 3) - return; - - printk(KERN_DEBUG "%s\n", title); - printk(" "); - for (i = 0; i < len; i++) { - if (!(i % 16) && i != 0) - printk ("\n "); - else if (!(i % 4) && i != 0) - printk(" "); - printk("%02X", *p++); - } - if (len % 16) - printk ("\n"); - return; -} -#define iucv_debug(lvl, fmt, args...) \ -do { \ - if (debuglevel >= lvl) \ - printk(KERN_DEBUG "%s: " fmt "\n", __FUNCTION__ , ## args); \ -} while (0) - -#else - -#define iucv_debug(lvl, fmt, args...) do { } while (0) -#define iucv_dumpit(title, buf, len) do { } while (0) - -#endif - -/* - * Internal functions - *******************************************************************************/ - -/** - * print start banner - */ -static void -iucv_banner(void) -{ - printk(KERN_INFO "IUCV lowlevel driver initialized\n"); -} - -/** - * iucv_init - Initialization - * - * Allocates and initializes various data structures. - */ -static int -iucv_init(void) -{ - int ret; - - if (iucv_external_int_buffer) - return 0; - - if (!MACHINE_IS_VM) { - printk(KERN_ERR "IUCV: IUCV connection needs VM as base\n"); - return -EPROTONOSUPPORT; - } - - ret = bus_register(&iucv_bus); - if (ret) { - printk(KERN_ERR "IUCV: failed to register bus.\n"); - return ret; - } - - iucv_root = s390_root_dev_register("iucv"); - if (IS_ERR(iucv_root)) { - printk(KERN_ERR "IUCV: failed to register iucv root.\n"); - bus_unregister(&iucv_bus); - return PTR_ERR(iucv_root); - } - - /* Note: GFP_DMA used used to get memory below 2G */ - iucv_external_int_buffer = kzalloc(sizeof(iucv_GeneralInterrupt), - GFP_KERNEL|GFP_DMA); - if (!iucv_external_int_buffer) { - printk(KERN_WARNING - "%s: Could not allocate external interrupt buffer\n", - __FUNCTION__); - s390_root_dev_unregister(iucv_root); - bus_unregister(&iucv_bus); - return -ENOMEM; - } - - /* Initialize parameter pool */ - iucv_param_pool = kzalloc(sizeof(iucv_param) * PARAM_POOL_SIZE, - GFP_KERNEL|GFP_DMA); - if (!iucv_param_pool) { - printk(KERN_WARNING "%s: Could not allocate param pool\n", - __FUNCTION__); - kfree(iucv_external_int_buffer); - iucv_external_int_buffer = NULL; - s390_root_dev_unregister(iucv_root); - bus_unregister(&iucv_bus); - return -ENOMEM; - } - - /* Initialize irq queue */ - INIT_LIST_HEAD(&iucv_irq_queue); - - /* Initialize handler table */ - INIT_LIST_HEAD(&iucv_handler_table); - - iucv_banner(); - return 0; -} - -/** - * iucv_exit - De-Initialization - * - * Frees everything allocated from iucv_init. - */ -static int iucv_retrieve_buffer (void); - -static void -iucv_exit(void) -{ - iucv_retrieve_buffer(); - kfree(iucv_external_int_buffer); - iucv_external_int_buffer = NULL; - kfree(iucv_param_pool); - iucv_param_pool = NULL; - s390_root_dev_unregister(iucv_root); - bus_unregister(&iucv_bus); - printk(KERN_INFO "IUCV lowlevel driver unloaded\n"); -} - -/** - * grab_param: - Get a parameter buffer from the pre-allocated pool. - * - * This function searches for an unused element in the pre-allocated pool - * of parameter buffers. If one is found, it marks it "in use" and returns - * a pointer to it. The calling function is responsible for releasing it - * when it has finished its usage. - * - * Returns: A pointer to iucv_param. - */ -static __inline__ iucv_param * -grab_param(void) -{ - iucv_param *ptr; - static int hint = 0; - - ptr = iucv_param_pool + hint; - do { - ptr++; - if (ptr >= iucv_param_pool + PARAM_POOL_SIZE) - ptr = iucv_param_pool; - } while (atomic_cmpxchg(&ptr->in_use, 0, 1) != 0); - hint = ptr - iucv_param_pool; - - memset(&ptr->param, 0, sizeof(ptr->param)); - return ptr; -} - -/** - * release_param - Release a parameter buffer. - * @p: A pointer to a struct iucv_param, previously obtained by calling - * grab_param(). - * - * This function marks the specified parameter buffer "unused". - */ -static __inline__ void -release_param(void *p) -{ - atomic_set(&((iucv_param *)p)->in_use, 0); -} - -/** - * iucv_add_handler: - Add a new handler - * @new_handler: handle that is being entered into chain. - * - * Places new handle on iucv_handler_table, if identical handler is not - * found. - * - * Returns: 0 on success, !0 on failure (handler already in chain). - */ -static int -iucv_add_handler (handler *new) -{ - ulong flags; - - iucv_debug(1, "entering"); - iucv_dumpit("handler:", new, sizeof(handler)); - - spin_lock_irqsave (&iucv_lock, flags); - if (!list_empty(&iucv_handler_table)) { - struct list_head *lh; - - /** - * Search list for handler with identical id. If one - * is found, the new handler is _not_ added. - */ - list_for_each(lh, &iucv_handler_table) { - handler *h = list_entry(lh, handler, list); - if (!memcmp(&new->id, &h->id, sizeof(h->id))) { - iucv_debug(1, "ret 1"); - spin_unlock_irqrestore (&iucv_lock, flags); - return 1; - } - } - } - /** - * If we get here, no handler was found. - */ - INIT_LIST_HEAD(&new->list); - list_add(&new->list, &iucv_handler_table); - spin_unlock_irqrestore (&iucv_lock, flags); - - iucv_debug(1, "exiting"); - return 0; -} - -/** - * b2f0: - * @code: identifier of IUCV call to CP. - * @parm: pointer to 40 byte iparml area passed to CP - * - * Calls CP to execute IUCV commands. - * - * Returns: return code from CP's IUCV call - */ -static inline ulong b2f0(__u32 code, void *parm) -{ - register unsigned long reg0 asm ("0"); - register unsigned long reg1 asm ("1"); - iucv_dumpit("iparml before b2f0 call:", parm, sizeof(iucv_param)); - - reg0 = code; - reg1 = virt_to_phys(parm); - asm volatile(".long 0xb2f01000" : : "d" (reg0), "a" (reg1)); - - iucv_dumpit("iparml after b2f0 call:", parm, sizeof(iucv_param)); - - return (unsigned long)*((__u8 *)(parm + 3)); -} - -/* - * Name: iucv_add_pathid - * Purpose: Adds a path id to the system. - * Input: pathid - pathid that is going to be entered into system - * handle - address of handler that the pathid will be associated - * with. - * pgm_data - token passed in by application. - * Output: 0: successful addition of pathid - * - EINVAL - pathid entry is being used by another application - * - ENOMEM - storage allocation for a new pathid table failed -*/ -static int -__iucv_add_pathid(__u16 pathid, handler *handler) -{ - - iucv_debug(1, "entering"); - - iucv_debug(1, "handler is pointing to %p", handler); - - if (pathid > (max_connections - 1)) - return -EINVAL; - - if (iucv_pathid_table[pathid]) { - iucv_debug(1, "pathid entry is %p", iucv_pathid_table[pathid]); - printk(KERN_WARNING - "%s: Pathid being used, error.\n", __FUNCTION__); - return -EINVAL; - } - iucv_pathid_table[pathid] = handler; - - iucv_debug(1, "exiting"); - return 0; -} /* end of add_pathid function */ - -static int -iucv_add_pathid(__u16 pathid, handler *handler) -{ - ulong flags; - int rc; - - spin_lock_irqsave (&iucv_lock, flags); - rc = __iucv_add_pathid(pathid, handler); - spin_unlock_irqrestore (&iucv_lock, flags); - return rc; -} - -static void -iucv_remove_pathid(__u16 pathid) -{ - ulong flags; - - if (pathid > (max_connections - 1)) - return; - - spin_lock_irqsave (&iucv_lock, flags); - iucv_pathid_table[pathid] = NULL; - spin_unlock_irqrestore (&iucv_lock, flags); -} - -/** - * iucv_declare_buffer_cpuid - * Register at VM for subsequent IUCV operations. This is executed - * on the reserved CPU iucv_cpuid. Called from iucv_declare_buffer(). - */ -static void -iucv_declare_buffer_cpuid (void *result) -{ - iparml_db *parm; - - parm = (iparml_db *)grab_param(); - parm->ipbfadr1 = virt_to_phys(iucv_external_int_buffer); - if ((*((ulong *)result) = b2f0(DECLARE_BUFFER, parm)) == 1) - *((ulong *)result) = parm->iprcode; - release_param(parm); -} - -/** - * iucv_retrieve_buffer_cpuid: - * Unregister IUCV usage at VM. This is always executed on the same - * cpu that registered the buffer to VM. - * Called from iucv_retrieve_buffer(). - */ -static void -iucv_retrieve_buffer_cpuid (void *cpu) -{ - iparml_control *parm; - - parm = (iparml_control *)grab_param(); - b2f0(RETRIEVE_BUFFER, parm); - release_param(parm); -} - -/** - * Name: iucv_declare_buffer - * Purpose: Specifies the guests real address of an external - * interrupt. - * Input: void - * Output: iprcode - return code from b2f0 call - */ -static int -iucv_declare_buffer (void) -{ - unsigned long flags; - ulong b2f0_result; - - iucv_debug(1, "entering"); - b2f0_result = -ENODEV; - spin_lock_irqsave (&iucv_lock, flags); - if (iucv_cpuid == -1) { - /* Reserve any cpu for use by iucv. */ - iucv_cpuid = smp_get_cpu(CPU_MASK_ALL); - spin_unlock_irqrestore (&iucv_lock, flags); - smp_call_function_on(iucv_declare_buffer_cpuid, - &b2f0_result, 0, 1, iucv_cpuid); - if (b2f0_result) { - smp_put_cpu(iucv_cpuid); - iucv_cpuid = -1; - } - iucv_debug(1, "Address of EIB = %p", iucv_external_int_buffer); - } else { - spin_unlock_irqrestore (&iucv_lock, flags); - b2f0_result = 0; - } - iucv_debug(1, "exiting"); - return b2f0_result; -} - -/** - * iucv_retrieve_buffer: - * - * Terminates all use of IUCV. - * Returns: return code from CP - */ -static int -iucv_retrieve_buffer (void) -{ - iucv_debug(1, "entering"); - if (iucv_cpuid != -1) { - smp_call_function_on(iucv_retrieve_buffer_cpuid, - NULL, 0, 1, iucv_cpuid); - /* Release the cpu reserved by iucv_declare_buffer. */ - smp_put_cpu(iucv_cpuid); - iucv_cpuid = -1; - } - iucv_debug(1, "exiting"); - return 0; -} - -/** - * iucv_remove_handler: - * @users_handler: handler to be removed - * - * Remove handler when application unregisters. - */ -static void -iucv_remove_handler(handler *handler) -{ - unsigned long flags; - - if ((!iucv_pathid_table) || (!handler)) - return; - - iucv_debug(1, "entering"); - - spin_lock_irqsave (&iucv_lock, flags); - list_del(&handler->list); - if (list_empty(&iucv_handler_table)) { - if (register_flag) { - unregister_external_interrupt(0x4000, iucv_irq_handler); - register_flag = 0; - } - } - spin_unlock_irqrestore (&iucv_lock, flags); - - iucv_debug(1, "exiting"); - return; -} - -/** - * iucv_register_program: - * @pgmname: user identification - * @userid: machine identification - * @pgmmask: Indicates which bits in the pgmname and userid combined will be - * used to determine who is given control. - * @ops: Address of interrupt handler table. - * @pgm_data: Application data to be passed to interrupt handlers. - * - * Registers an application with IUCV. - * Returns: - * The address of handler, or NULL on failure. - * NOTE on pgmmask: - * If pgmname, userid and pgmmask are provided, pgmmask is entered into the - * handler as is. - * If pgmmask is NULL, the internal mask is set to all 0xff's - * When userid is NULL, the first 8 bytes of the internal mask are forced - * to 0x00. - * If pgmmask and userid are NULL, the first 8 bytes of the internal mask - * are forced to 0x00 and the last 16 bytes to 0xff. - */ - -iucv_handle_t -iucv_register_program (__u8 pgmname[16], - __u8 userid[8], - __u8 pgmmask[24], - iucv_interrupt_ops_t * ops, void *pgm_data) -{ - ulong rc = 0; /* return code from function calls */ - handler *new_handler; - - iucv_debug(1, "entering"); - - if (ops == NULL) { - /* interrupt table is not defined */ - printk(KERN_WARNING "%s: Interrupt table is not defined, " - "exiting\n", __FUNCTION__); - return NULL; - } - if (!pgmname) { - printk(KERN_WARNING "%s: pgmname not provided\n", __FUNCTION__); - return NULL; - } - - /* Allocate handler entry */ - new_handler = (handler *)kmalloc(sizeof(handler), GFP_ATOMIC); - if (new_handler == NULL) { - printk(KERN_WARNING "%s: storage allocation for new handler " - "failed.\n", __FUNCTION__); - return NULL; - } - - if (!iucv_pathid_table) { - if (iucv_init()) { - kfree(new_handler); - return NULL; - } - - max_connections = iucv_query_maxconn(); - iucv_pathid_table = kcalloc(max_connections, sizeof(handler *), - GFP_ATOMIC); - if (iucv_pathid_table == NULL) { - printk(KERN_WARNING "%s: iucv_pathid_table storage " - "allocation failed\n", __FUNCTION__); - kfree(new_handler); - return NULL; - } - } - memset(new_handler, 0, sizeof (handler)); - memcpy(new_handler->id.user_data, pgmname, - sizeof (new_handler->id.user_data)); - if (userid) { - memcpy (new_handler->id.userid, userid, - sizeof (new_handler->id.userid)); - ASCEBC (new_handler->id.userid, - sizeof (new_handler->id.userid)); - EBC_TOUPPER (new_handler->id.userid, - sizeof (new_handler->id.userid)); - - if (pgmmask) { - memcpy (new_handler->id.mask, pgmmask, - sizeof (new_handler->id.mask)); - } else { - memset (new_handler->id.mask, 0xFF, - sizeof (new_handler->id.mask)); - } - } else { - if (pgmmask) { - memcpy (new_handler->id.mask, pgmmask, - sizeof (new_handler->id.mask)); - } else { - memset (new_handler->id.mask, 0xFF, - sizeof (new_handler->id.mask)); - } - memset (new_handler->id.userid, 0x00, - sizeof (new_handler->id.userid)); - } - /* fill in the rest of handler */ - new_handler->pgm_data = pgm_data; - new_handler->interrupt_table = ops; - - /* - * Check if someone else is registered with same pgmname, userid - * and mask. If someone is already registered with same pgmname, - * userid and mask, registration will fail and NULL will be returned - * to the application. - * If identical handler not found, then handler is added to list. - */ - rc = iucv_add_handler(new_handler); - if (rc) { - printk(KERN_WARNING "%s: Someone already registered with same " - "pgmname, userid, pgmmask\n", __FUNCTION__); - kfree (new_handler); - return NULL; - } - - rc = iucv_declare_buffer(); - if (rc) { - char *err = "Unknown"; - iucv_remove_handler(new_handler); - kfree(new_handler); - switch(rc) { - case 0x03: - err = "Directory error"; - break; - case 0x0a: - err = "Invalid length"; - break; - case 0x13: - err = "Buffer already exists"; - break; - case 0x3e: - err = "Buffer overlap"; - break; - case 0x5c: - err = "Paging or storage error"; - break; - } - printk(KERN_WARNING "%s: iucv_declare_buffer " - "returned error 0x%02lx (%s)\n", __FUNCTION__, rc, err); - return NULL; - } - if (!register_flag) { - /* request the 0x4000 external interrupt */ - rc = register_external_interrupt (0x4000, iucv_irq_handler); - if (rc) { - iucv_remove_handler(new_handler); - kfree (new_handler); - printk(KERN_WARNING "%s: " - "register_external_interrupt returned %ld\n", - __FUNCTION__, rc); - return NULL; - - } - register_flag = 1; - } - iucv_debug(1, "exiting"); - return new_handler; -} /* end of register function */ - -/** - * iucv_unregister_program: - * @handle: address of handler - * - * Unregister application with IUCV. - * Returns: - * 0 on success, -EINVAL, if specified handle is invalid. - */ - -int -iucv_unregister_program (iucv_handle_t handle) -{ - handler *h = NULL; - struct list_head *lh; - int i; - ulong flags; - - iucv_debug(1, "entering"); - iucv_debug(1, "address of handler is %p", h); - - /* Checking if handle is valid */ - spin_lock_irqsave (&iucv_lock, flags); - list_for_each(lh, &iucv_handler_table) { - if ((handler *)handle == list_entry(lh, handler, list)) { - h = (handler *)handle; - break; - } - } - if (!h) { - spin_unlock_irqrestore (&iucv_lock, flags); - if (handle) - printk(KERN_WARNING - "%s: Handler not found in iucv_handler_table.\n", - __FUNCTION__); - else - printk(KERN_WARNING - "%s: NULL handle passed by application.\n", - __FUNCTION__); - return -EINVAL; - } - - /** - * First, walk thru iucv_pathid_table and sever any pathid which is - * still pointing to the handler to be removed. - */ - for (i = 0; i < max_connections; i++) - if (iucv_pathid_table[i] == h) { - spin_unlock_irqrestore (&iucv_lock, flags); - iucv_sever(i, h->id.user_data); - spin_lock_irqsave(&iucv_lock, flags); - } - spin_unlock_irqrestore (&iucv_lock, flags); - - iucv_remove_handler(h); - kfree(h); - - iucv_debug(1, "exiting"); - return 0; -} - -/** - * iucv_accept: - * @pathid: Path identification number - * @msglim_reqstd: The number of outstanding messages requested. - * @user_data: Data specified by the iucv_connect function. - * @flags1: Contains options for this path. - * - IPPRTY (0x20) Specifies if you want to send priority message. - * - IPRMDATA (0x80) Specifies whether your program can handle a message - * in the parameter list. - * - IPQUSCE (0x40) Specifies whether you want to quiesce the path being - * established. - * @handle: Address of handler. - * @pgm_data: Application data passed to interrupt handlers. - * @flags1_out: Pointer to an int. If not NULL, on return the options for - * the path are stored at the given location: - * - IPPRTY (0x20) Indicates you may send a priority message. - * @msglim: Pointer to an __u16. If not NULL, on return the maximum - * number of outstanding messages is stored at the given - * location. - * - * This function is issued after the user receives a Connection Pending external - * interrupt and now wishes to complete the IUCV communication path. - * Returns: - * return code from CP - */ -int -iucv_accept(__u16 pathid, __u16 msglim_reqstd, - __u8 user_data[16], int flags1, - iucv_handle_t handle, void *pgm_data, - int *flags1_out, __u16 * msglim) -{ - ulong b2f0_result = 0; - ulong flags; - struct list_head *lh; - handler *h = NULL; - iparml_control *parm; - - iucv_debug(1, "entering"); - iucv_debug(1, "pathid = %d", pathid); - - /* Checking if handle is valid */ - spin_lock_irqsave (&iucv_lock, flags); - list_for_each(lh, &iucv_handler_table) { - if ((handler *)handle == list_entry(lh, handler, list)) { - h = (handler *)handle; - break; - } - } - spin_unlock_irqrestore (&iucv_lock, flags); - - if (!h) { - if (handle) - printk(KERN_WARNING - "%s: Handler not found in iucv_handler_table.\n", - __FUNCTION__); - else - printk(KERN_WARNING - "%s: NULL handle passed by application.\n", - __FUNCTION__); - return -EINVAL; - } - - parm = (iparml_control *)grab_param(); - - parm->ippathid = pathid; - parm->ipmsglim = msglim_reqstd; - if (user_data) - memcpy(parm->ipuser, user_data, sizeof(parm->ipuser)); - - parm->ipflags1 = (__u8)flags1; - b2f0_result = b2f0(ACCEPT, parm); - - if (!b2f0_result) { - if (msglim) - *msglim = parm->ipmsglim; - if (pgm_data) - h->pgm_data = pgm_data; - if (flags1_out) - *flags1_out = (parm->ipflags1 & IPPRTY) ? IPPRTY : 0; - } - release_param(parm); - - iucv_debug(1, "exiting"); - return b2f0_result; -} - -/** - * iucv_connect: - * @pathid: Path identification number - * @msglim_reqstd: Number of outstanding messages requested - * @user_data: 16-byte user data - * @userid: 8-byte of user identification - * @system_name: 8-byte identifying the system name - * @flags1: Specifies options for this path: - * - IPPRTY (0x20) Specifies if you want to send priority message. - * - IPRMDATA (0x80) Specifies whether your program can handle a message - * in the parameter list. - * - IPQUSCE (0x40) Specifies whether you want to quiesce the path being - * established. - * - IPLOCAL (0x01) Allows an application to force the partner to be on the - * local system. If local is specified then target class - * cannot be specified. - * @flags1_out: Pointer to an int. If not NULL, on return the options for - * the path are stored at the given location: - * - IPPRTY (0x20) Indicates you may send a priority message. - * @msglim: Pointer to an __u16. If not NULL, on return the maximum - * number of outstanding messages is stored at the given - * location. - * @handle: Address of handler. - * @pgm_data: Application data to be passed to interrupt handlers. - * - * This function establishes an IUCV path. Although the connect may complete - * successfully, you are not able to use the path until you receive an IUCV - * Connection Complete external interrupt. - * Returns: return code from CP, or one of the following - * - ENOMEM - * - return code from iucv_declare_buffer - * - EINVAL - invalid handle passed by application - * - EINVAL - pathid address is NULL - * - ENOMEM - pathid table storage allocation failed - * - return code from internal function add_pathid - */ -int -iucv_connect (__u16 *pathid, __u16 msglim_reqstd, - __u8 user_data[16], __u8 userid[8], - __u8 system_name[8], int flags1, - int *flags1_out, __u16 * msglim, - iucv_handle_t handle, void *pgm_data) -{ - iparml_control *parm; - iparml_control local_parm; - struct list_head *lh; - ulong b2f0_result = 0; - ulong flags; - int add_pathid_result = 0; - handler *h = NULL; - __u8 no_memory[16] = "NO MEMORY"; - - iucv_debug(1, "entering"); - - /* Checking if handle is valid */ - spin_lock_irqsave (&iucv_lock, flags); - list_for_each(lh, &iucv_handler_table) { - if ((handler *)handle == list_entry(lh, handler, list)) { - h = (handler *)handle; - break; - } - } - spin_unlock_irqrestore (&iucv_lock, flags); - - if (!h) { - if (handle) - printk(KERN_WARNING - "%s: Handler not found in iucv_handler_table.\n", - __FUNCTION__); - else - printk(KERN_WARNING - "%s: NULL handle passed by application.\n", - __FUNCTION__); - return -EINVAL; - } - - if (pathid == NULL) { - printk(KERN_WARNING "%s: NULL pathid pointer\n", - __FUNCTION__); - return -EINVAL; - } - - parm = (iparml_control *)grab_param(); - - parm->ipmsglim = msglim_reqstd; - - if (user_data) - memcpy(parm->ipuser, user_data, sizeof(parm->ipuser)); - - if (userid) { - memcpy(parm->ipvmid, userid, sizeof(parm->ipvmid)); - ASCEBC(parm->ipvmid, sizeof(parm->ipvmid)); - EBC_TOUPPER(parm->ipvmid, sizeof(parm->ipvmid)); - } - - if (system_name) { - memcpy(parm->iptarget, system_name, sizeof(parm->iptarget)); - ASCEBC(parm->iptarget, sizeof(parm->iptarget)); - EBC_TOUPPER(parm->iptarget, sizeof(parm->iptarget)); - } - - /* In order to establish an IUCV connection, the procedure is: - * - * b2f0(CONNECT) - * take the ippathid from the b2f0 call - * register the handler to the ippathid - * - * Unfortunately, the ConnectionEstablished message gets sent after the - * b2f0(CONNECT) call but before the register is handled. - * - * In order for this race condition to be eliminated, the IUCV Control - * Interrupts must be disabled for the above procedure. - * - * David Kennedy <dkennedy@linuxcare.com> - */ - - /* Enable everything but IUCV Control messages */ - iucv_setmask(~(AllInterrupts)); - messagesDisabled = 1; - - spin_lock_irqsave (&iucv_lock, flags); - parm->ipflags1 = (__u8)flags1; - b2f0_result = b2f0(CONNECT, parm); - memcpy(&local_parm, parm, sizeof(local_parm)); - release_param(parm); - parm = &local_parm; - if (!b2f0_result) - add_pathid_result = __iucv_add_pathid(parm->ippathid, h); - spin_unlock_irqrestore (&iucv_lock, flags); - - if (b2f0_result) { - iucv_setmask(~0); - messagesDisabled = 0; - return b2f0_result; - } - - *pathid = parm->ippathid; - - /* Enable everything again */ - iucv_setmask(IUCVControlInterruptsFlag); - - if (msglim) - *msglim = parm->ipmsglim; - if (flags1_out) - *flags1_out = (parm->ipflags1 & IPPRTY) ? IPPRTY : 0; - - if (add_pathid_result) { - iucv_sever(*pathid, no_memory); - printk(KERN_WARNING "%s: add_pathid failed with rc =" - " %d\n", __FUNCTION__, add_pathid_result); - return(add_pathid_result); - } - - iucv_debug(1, "exiting"); - return b2f0_result; -} - -/** - * iucv_purge: - * @pathid: Path identification number - * @msgid: Message ID of message to purge. - * @srccls: Message class of the message to purge. - * @audit: Pointer to an __u32. If not NULL, on return, information about - * asynchronous errors that may have affected the normal completion - * of this message ist stored at the given location. - * - * Cancels a message you have sent. - * Returns: return code from CP - */ -int -iucv_purge (__u16 pathid, __u32 msgid, __u32 srccls, __u32 *audit) -{ - iparml_purge *parm; - ulong b2f0_result = 0; - - iucv_debug(1, "entering"); - iucv_debug(1, "pathid = %d", pathid); - - parm = (iparml_purge *)grab_param(); - - parm->ipmsgid = msgid; - parm->ippathid = pathid; - parm->ipsrccls = srccls; - parm->ipflags1 |= (IPSRCCLS | IPFGMID | IPFGPID); - b2f0_result = b2f0(PURGE, parm); - - if (!b2f0_result && audit) { - memcpy(audit, parm->ipaudit, sizeof(parm->ipaudit)); - /* parm->ipaudit has only 3 bytes */ - *audit >>= 8; - } - - release_param(parm); - - iucv_debug(1, "b2f0_result = %ld", b2f0_result); - iucv_debug(1, "exiting"); - return b2f0_result; -} - -/** - * iucv_query_generic: - * @want_maxconn: Flag, describing which value is to be returned. - * - * Helper function for iucv_query_maxconn() and iucv_query_bufsize(). - * - * Returns: The buffersize, if want_maxconn is 0; the maximum number of - * connections, if want_maxconn is 1 or an error-code < 0 on failure. - */ -static int -iucv_query_generic(int want_maxconn) -{ - register unsigned long reg0 asm ("0"); - register unsigned long reg1 asm ("1"); - iparml_purge *parm = (iparml_purge *)grab_param(); - int bufsize, maxconn; - int ccode; - - /** - * Call b2f0 and store R0 (max buffer size), - * R1 (max connections) and CC. - */ - reg0 = QUERY; - reg1 = virt_to_phys(parm); - asm volatile( - " .long 0xb2f01000\n" - " ipm %0\n" - " srl %0,28\n" - : "=d" (ccode), "+d" (reg0), "+d" (reg1) : : "cc"); - bufsize = reg0; - maxconn = reg1; - release_param(parm); - - if (ccode) - return -EPERM; - if (want_maxconn) - return maxconn; - return bufsize; -} - -/** - * iucv_query_maxconn: - * - * Determines the maximum number of connections thay may be established. - * - * Returns: Maximum number of connections that can be. - */ -ulong -iucv_query_maxconn(void) -{ - return iucv_query_generic(1); -} - -/** - * iucv_query_bufsize: - * - * Determines the size of the external interrupt buffer. - * - * Returns: Size of external interrupt buffer. - */ -ulong -iucv_query_bufsize (void) -{ - return iucv_query_generic(0); -} - -/** - * iucv_quiesce: - * @pathid: Path identification number - * @user_data: 16-byte user data - * - * Temporarily suspends incoming messages on an IUCV path. - * You can later reactivate the path by invoking the iucv_resume function. - * Returns: return code from CP - */ -int -iucv_quiesce (__u16 pathid, __u8 user_data[16]) -{ - iparml_control *parm; - ulong b2f0_result = 0; - - iucv_debug(1, "entering"); - iucv_debug(1, "pathid = %d", pathid); - - parm = (iparml_control *)grab_param(); - - memcpy(parm->ipuser, user_data, sizeof(parm->ipuser)); - parm->ippathid = pathid; - - b2f0_result = b2f0(QUIESCE, parm); - release_param(parm); - - iucv_debug(1, "b2f0_result = %ld", b2f0_result); - iucv_debug(1, "exiting"); - - return b2f0_result; -} - -/** - * iucv_receive: - * @pathid: Path identification number. - * @buffer: Address of buffer to receive. Must be below 2G. - * @buflen: Length of buffer to receive. - * @msgid: Specifies the message ID. - * @trgcls: Specifies target class. - * @flags1_out: Receives options for path on return. - * - IPNORPY (0x10) Specifies whether a reply is required - * - IPPRTY (0x20) Specifies if you want to send priority message - * - IPRMDATA (0x80) Specifies the data is contained in the parameter list - * @residual_buffer: Receives the address of buffer updated by the number - * of bytes you have received on return. - * @residual_length: On return, receives one of the following values: - * - 0 If the receive buffer is the same length as - * the message. - * - Remaining bytes in buffer If the receive buffer is longer than the - * message. - * - Remaining bytes in message If the receive buffer is shorter than the - * message. - * - * This function receives messages that are being sent to you over established - * paths. - * Returns: return code from CP IUCV call; If the receive buffer is shorter - * than the message, always 5 - * -EINVAL - buffer address is pointing to NULL - */ -int -iucv_receive (__u16 pathid, __u32 msgid, __u32 trgcls, - void *buffer, ulong buflen, - int *flags1_out, ulong * residual_buffer, ulong * residual_length) -{ - iparml_db *parm; - ulong b2f0_result; - int moved = 0; /* number of bytes moved from parmlist to buffer */ - - iucv_debug(2, "entering"); - - if (!buffer) - return -EINVAL; - - parm = (iparml_db *)grab_param(); - - parm->ipbfadr1 = (__u32) (addr_t) buffer; - parm->ipbfln1f = (__u32) ((ulong) buflen); - parm->ipmsgid = msgid; - parm->ippathid = pathid; - parm->iptrgcls = trgcls; - parm->ipflags1 = (IPFGPID | IPFGMID | IPFGMCL); - - b2f0_result = b2f0(RECEIVE, parm); - - if (!b2f0_result || b2f0_result == 5) { - if (flags1_out) { - iucv_debug(2, "*flags1_out = %d", *flags1_out); - *flags1_out = (parm->ipflags1 & (~0x07)); - iucv_debug(2, "*flags1_out = %d", *flags1_out); - } - - if (!(parm->ipflags1 & IPRMDATA)) { /*msg not in parmlist */ - if (residual_length) - *residual_length = parm->ipbfln1f; - - if (residual_buffer) - *residual_buffer = parm->ipbfadr1; - } else { - moved = min_t (unsigned long, buflen, 8); - - memcpy ((char *) buffer, - (char *) &parm->ipbfadr1, moved); - - if (buflen < 8) - b2f0_result = 5; - - if (residual_length) - *residual_length = abs (buflen - 8); - - if (residual_buffer) - *residual_buffer = (ulong) (buffer + moved); - } - } - release_param(parm); - - iucv_debug(2, "exiting"); - return b2f0_result; -} - -/* - * Name: iucv_receive_array - * Purpose: This function receives messages that are being sent to you - * over established paths. - * Input: pathid - path identification number - * buffer - address of array of buffers - * buflen - total length of buffers - * msgid - specifies the message ID. - * trgcls - specifies target class - * Output: - * flags1_out: Options for path. - * IPNORPY - 0x10 specifies whether a reply is required - * IPPRTY - 0x20 specifies if you want to send priority message - * IPRMDATA - 0x80 specifies the data is contained in the parameter list - * residual_buffer - address points to the current list entry IUCV - * is working on. - * residual_length - - * Contains one of the following values, if the receive buffer is: - * The same length as the message, this field is zero. - * Longer than the message, this field contains the number of - * bytes remaining in the buffer. - * Shorter than the message, this field contains the residual - * count (that is, the number of bytes remaining in the - * message that does not fit into the buffer. In this case - * b2f0_result = 5. - * Return: b2f0_result - return code from CP - * (-EINVAL) - buffer address is NULL - */ -int -iucv_receive_array (__u16 pathid, - __u32 msgid, __u32 trgcls, - iucv_array_t * buffer, ulong buflen, - int *flags1_out, - ulong * residual_buffer, ulong * residual_length) -{ - iparml_db *parm; - ulong b2f0_result; - int i = 0, moved = 0, need_to_move = 8, dyn_len; - - iucv_debug(2, "entering"); - - if (!buffer) - return -EINVAL; - - parm = (iparml_db *)grab_param(); - - parm->ipbfadr1 = (__u32) ((ulong) buffer); - parm->ipbfln1f = (__u32) buflen; - parm->ipmsgid = msgid; - parm->ippathid = pathid; - parm->iptrgcls = trgcls; - parm->ipflags1 = (IPBUFLST | IPFGPID | IPFGMID | IPFGMCL); - - b2f0_result = b2f0(RECEIVE, parm); - - if (!b2f0_result || b2f0_result == 5) { - - if (flags1_out) { - iucv_debug(2, "*flags1_out = %d", *flags1_out); - *flags1_out = (parm->ipflags1 & (~0x07)); - iucv_debug(2, "*flags1_out = %d", *flags1_out); - } - - if (!(parm->ipflags1 & IPRMDATA)) { /*msg not in parmlist */ - - if (residual_length) - *residual_length = parm->ipbfln1f; - - if (residual_buffer) - *residual_buffer = parm->ipbfadr1; - - } else { - /* copy msg from parmlist to users array. */ - - while ((moved < 8) && (moved < buflen)) { - dyn_len = - min_t (unsigned int, - (buffer + i)->length, need_to_move); - - memcpy ((char *)((ulong)((buffer + i)->address)), - ((char *) &parm->ipbfadr1) + moved, - dyn_len); - - moved += dyn_len; - need_to_move -= dyn_len; - - (buffer + i)->address = - (__u32) - ((ulong)(__u8 *) ((ulong)(buffer + i)->address) - + dyn_len); - - (buffer + i)->length -= dyn_len; - i++; - } - - if (need_to_move) /* buflen < 8 bytes */ - b2f0_result = 5; - - if (residual_length) - *residual_length = abs (buflen - 8); - - if (residual_buffer) { - if (!moved) - *residual_buffer = (ulong) buffer; - else - *residual_buffer = - (ulong) (buffer + (i - 1)); - } - - } - } - release_param(parm); - - iucv_debug(2, "exiting"); - return b2f0_result; -} - -/** - * iucv_reject: - * @pathid: Path identification number. - * @msgid: Message ID of the message to reject. - * @trgcls: Target class of the message to reject. - * Returns: return code from CP - * - * Refuses a specified message. Between the time you are notified of a - * message and the time that you complete the message, the message may - * be rejected. - */ -int -iucv_reject (__u16 pathid, __u32 msgid, __u32 trgcls) -{ - iparml_db *parm; - ulong b2f0_result = 0; - - iucv_debug(1, "entering"); - iucv_debug(1, "pathid = %d", pathid); - - parm = (iparml_db *)grab_param(); - - parm->ippathid = pathid; - parm->ipmsgid = msgid; - parm->iptrgcls = trgcls; - parm->ipflags1 = (IPFGMCL | IPFGMID | IPFGPID); - - b2f0_result = b2f0(REJECT, parm); - release_param(parm); - - iucv_debug(1, "b2f0_result = %ld", b2f0_result); - iucv_debug(1, "exiting"); - - return b2f0_result; -} - -/* - * Name: iucv_reply - * Purpose: This function responds to the two-way messages that you - * receive. You must identify completely the message to - * which you wish to reply. ie, pathid, msgid, and trgcls. - * Input: pathid - path identification number - * msgid - specifies the message ID. - * trgcls - specifies target class - * flags1 - option for path - * IPPRTY- 0x20 - specifies if you want to send priority message - * buffer - address of reply buffer - * buflen - length of reply buffer - * Output: ipbfadr2 - Address of buffer updated by the number - * of bytes you have moved. - * ipbfln2f - Contains one of the following values: - * If the answer buffer is the same length as the reply, this field - * contains zero. - * If the answer buffer is longer than the reply, this field contains - * the number of bytes remaining in the buffer. - * If the answer buffer is shorter than the reply, this field contains - * a residual count (that is, the number of bytes remianing in the - * reply that does not fit into the buffer. In this - * case b2f0_result = 5. - * Return: b2f0_result - return code from CP - * (-EINVAL) - buffer address is NULL - */ -int -iucv_reply (__u16 pathid, - __u32 msgid, __u32 trgcls, - int flags1, - void *buffer, ulong buflen, ulong * ipbfadr2, ulong * ipbfln2f) -{ - iparml_db *parm; - ulong b2f0_result; - - iucv_debug(2, "entering"); - - if (!buffer) - return -EINVAL; - - parm = (iparml_db *)grab_param(); - - parm->ipbfadr2 = (__u32) ((ulong) buffer); - parm->ipbfln2f = (__u32) buflen; /* length of message */ - parm->ippathid = pathid; - parm->ipmsgid = msgid; - parm->iptrgcls = trgcls; - parm->ipflags1 = (__u8) flags1; /* priority message */ - - b2f0_result = b2f0(REPLY, parm); - - if ((!b2f0_result) || (b2f0_result == 5)) { - if (ipbfadr2) - *ipbfadr2 = parm->ipbfadr2; - if (ipbfln2f) - *ipbfln2f = parm->ipbfln2f; - } - release_param(parm); - - iucv_debug(2, "exiting"); - - return b2f0_result; -} - -/* - * Name: iucv_reply_array - * Purpose: This function responds to the two-way messages that you - * receive. You must identify completely the message to - * which you wish to reply. ie, pathid, msgid, and trgcls. - * The array identifies a list of addresses and lengths of - * discontiguous buffers that contains the reply data. - * Input: pathid - path identification number - * msgid - specifies the message ID. - * trgcls - specifies target class - * flags1 - option for path - * IPPRTY- specifies if you want to send priority message - * buffer - address of array of reply buffers - * buflen - total length of reply buffers - * Output: ipbfadr2 - Address of buffer which IUCV is currently working on. - * ipbfln2f - Contains one of the following values: - * If the answer buffer is the same length as the reply, this field - * contains zero. - * If the answer buffer is longer than the reply, this field contains - * the number of bytes remaining in the buffer. - * If the answer buffer is shorter than the reply, this field contains - * a residual count (that is, the number of bytes remianing in the - * reply that does not fit into the buffer. In this - * case b2f0_result = 5. - * Return: b2f0_result - return code from CP - * (-EINVAL) - buffer address is NULL -*/ -int -iucv_reply_array (__u16 pathid, - __u32 msgid, __u32 trgcls, - int flags1, - iucv_array_t * buffer, - ulong buflen, ulong * ipbfadr2, ulong * ipbfln2f) -{ - iparml_db *parm; - ulong b2f0_result; - - iucv_debug(2, "entering"); - - if (!buffer) - return -EINVAL; - - parm = (iparml_db *)grab_param(); - - parm->ipbfadr2 = (__u32) ((ulong) buffer); - parm->ipbfln2f = buflen; /* length of message */ - parm->ippathid = pathid; - parm->ipmsgid = msgid; - parm->iptrgcls = trgcls; - parm->ipflags1 = (IPANSLST | flags1); - - b2f0_result = b2f0(REPLY, parm); - - if ((!b2f0_result) || (b2f0_result == 5)) { - - if (ipbfadr2) - *ipbfadr2 = parm->ipbfadr2; - if (ipbfln2f) - *ipbfln2f = parm->ipbfln2f; - } - release_param(parm); - - iucv_debug(2, "exiting"); - - return b2f0_result; -} - -/* - * Name: iucv_reply_prmmsg - * Purpose: This function responds to the two-way messages that you - * receive. You must identify completely the message to - * which you wish to reply. ie, pathid, msgid, and trgcls. - * Prmmsg signifies the data is moved into the - * parameter list. - * Input: pathid - path identification number - * msgid - specifies the message ID. - * trgcls - specifies target class - * flags1 - option for path - * IPPRTY- specifies if you want to send priority message - * prmmsg - 8-bytes of data to be placed into the parameter - * list. - * Output: NA - * Return: b2f0_result - return code from CP -*/ -int -iucv_reply_prmmsg (__u16 pathid, - __u32 msgid, __u32 trgcls, int flags1, __u8 prmmsg[8]) -{ - iparml_dpl *parm; - ulong b2f0_result; - - iucv_debug(2, "entering"); - - parm = (iparml_dpl *)grab_param(); - - parm->ippathid = pathid; - parm->ipmsgid = msgid; - parm->iptrgcls = trgcls; - memcpy(parm->iprmmsg, prmmsg, sizeof (parm->iprmmsg)); - parm->ipflags1 = (IPRMDATA | flags1); - - b2f0_result = b2f0(REPLY, parm); - release_param(parm); - - iucv_debug(2, "exiting"); - - return b2f0_result; -} - -/** - * iucv_resume: - * @pathid: Path identification number - * @user_data: 16-byte of user data - * - * This function restores communication over a quiesced path. - * Returns: return code from CP - */ -int -iucv_resume (__u16 pathid, __u8 user_data[16]) -{ - iparml_control *parm; - ulong b2f0_result = 0; - - iucv_debug(1, "entering"); - iucv_debug(1, "pathid = %d", pathid); - - parm = (iparml_control *)grab_param(); - - memcpy (parm->ipuser, user_data, sizeof (*user_data)); - parm->ippathid = pathid; - - b2f0_result = b2f0(RESUME, parm); - release_param(parm); - - iucv_debug(1, "exiting"); - - return b2f0_result; -} - -/* - * Name: iucv_send - * Purpose: sends messages - * Input: pathid - ushort, pathid - * msgid - ulong *, id of message returned to caller - * trgcls - ulong, target message class - * srccls - ulong, source message class - * msgtag - ulong, message tag - * flags1 - Contains options for this path. - * IPPRTY - Ox20 - specifies if you want to send a priority message. - * buffer - pointer to buffer - * buflen - ulong, length of buffer - * Output: b2f0_result - return code from b2f0 call - * msgid - returns message id - */ -int -iucv_send (__u16 pathid, __u32 * msgid, - __u32 trgcls, __u32 srccls, - __u32 msgtag, int flags1, void *buffer, ulong buflen) -{ - iparml_db *parm; - ulong b2f0_result; - - iucv_debug(2, "entering"); - - if (!buffer) - return -EINVAL; - - parm = (iparml_db *)grab_param(); - - parm->ipbfadr1 = (__u32) ((ulong) buffer); - parm->ippathid = pathid; - parm->iptrgcls = trgcls; - parm->ipbfln1f = (__u32) buflen; /* length of message */ - parm->ipsrccls = srccls; - parm->ipmsgtag = msgtag; - parm->ipflags1 = (IPNORPY | flags1); /* one way priority message */ - - b2f0_result = b2f0(SEND, parm); - - if ((!b2f0_result) && (msgid)) - *msgid = parm->ipmsgid; - release_param(parm); - - iucv_debug(2, "exiting"); - - return b2f0_result; -} - -/* - * Name: iucv_send_array - * Purpose: This function transmits data to another application. - * The contents of buffer is the address of the array of - * addresses and lengths of discontiguous buffers that hold - * the message text. This is a one-way message and the - * receiver will not reply to the message. - * Input: pathid - path identification number - * trgcls - specifies target class - * srccls - specifies the source message class - * msgtag - specifies a tag to be associated witht the message - * flags1 - option for path - * IPPRTY- specifies if you want to send priority message - * buffer - address of array of send buffers - * buflen - total length of send buffers - * Output: msgid - specifies the message ID. - * Return: b2f0_result - return code from CP - * (-EINVAL) - buffer address is NULL - */ -int -iucv_send_array (__u16 pathid, - __u32 * msgid, - __u32 trgcls, - __u32 srccls, - __u32 msgtag, int flags1, iucv_array_t * buffer, ulong buflen) -{ - iparml_db *parm; - ulong b2f0_result; - - iucv_debug(2, "entering"); - - if (!buffer) - return -EINVAL; - - parm = (iparml_db *)grab_param(); - - parm->ippathid = pathid; - parm->iptrgcls = trgcls; - parm->ipbfadr1 = (__u32) ((ulong) buffer); - parm->ipbfln1f = (__u32) buflen; /* length of message */ - parm->ipsrccls = srccls; - parm->ipmsgtag = msgtag; - parm->ipflags1 = (IPNORPY | IPBUFLST | flags1); - b2f0_result = b2f0(SEND, parm); - - if ((!b2f0_result) && (msgid)) - *msgid = parm->ipmsgid; - release_param(parm); - - iucv_debug(2, "exiting"); - return b2f0_result; -} - -/* - * Name: iucv_send_prmmsg - * Purpose: This function transmits data to another application. - * Prmmsg specifies that the 8-bytes of data are to be moved - * into the parameter list. This is a one-way message and the - * receiver will not reply to the message. - * Input: pathid - path identification number - * trgcls - specifies target class - * srccls - specifies the source message class - * msgtag - specifies a tag to be associated with the message - * flags1 - option for path - * IPPRTY- specifies if you want to send priority message - * prmmsg - 8-bytes of data to be placed into parameter list - * Output: msgid - specifies the message ID. - * Return: b2f0_result - return code from CP -*/ -int -iucv_send_prmmsg (__u16 pathid, - __u32 * msgid, - __u32 trgcls, - __u32 srccls, __u32 msgtag, int flags1, __u8 prmmsg[8]) -{ - iparml_dpl *parm; - ulong b2f0_result; - - iucv_debug(2, "entering"); - - parm = (iparml_dpl *)grab_param(); - - parm->ippathid = pathid; - parm->iptrgcls = trgcls; - parm->ipsrccls = srccls; - parm->ipmsgtag = msgtag; - parm->ipflags1 = (IPRMDATA | IPNORPY | flags1); - memcpy(parm->iprmmsg, prmmsg, sizeof(parm->iprmmsg)); - - b2f0_result = b2f0(SEND, parm); - - if ((!b2f0_result) && (msgid)) - *msgid = parm->ipmsgid; - release_param(parm); - - iucv_debug(2, "exiting"); - - return b2f0_result; -} - -/* - * Name: iucv_send2way - * Purpose: This function transmits data to another application. - * Data to be transmitted is in a buffer. The receiver - * of the send is expected to reply to the message and - * a buffer is provided into which IUCV moves the reply - * to this message. - * Input: pathid - path identification number - * trgcls - specifies target class - * srccls - specifies the source message class - * msgtag - specifies a tag associated with the message - * flags1 - option for path - * IPPRTY- specifies if you want to send priority message - * buffer - address of send buffer - * buflen - length of send buffer - * ansbuf - address of buffer to reply with - * anslen - length of buffer to reply with - * Output: msgid - specifies the message ID. - * Return: b2f0_result - return code from CP - * (-EINVAL) - buffer or ansbuf address is NULL - */ -int -iucv_send2way (__u16 pathid, - __u32 * msgid, - __u32 trgcls, - __u32 srccls, - __u32 msgtag, - int flags1, - void *buffer, ulong buflen, void *ansbuf, ulong anslen) -{ - iparml_db *parm; - ulong b2f0_result; - - iucv_debug(2, "entering"); - - if (!buffer || !ansbuf) - return -EINVAL; - - parm = (iparml_db *)grab_param(); - - parm->ippathid = pathid; - parm->iptrgcls = trgcls; - parm->ipbfadr1 = (__u32) ((ulong) buffer); - parm->ipbfln1f = (__u32) buflen; /* length of message */ - parm->ipbfadr2 = (__u32) ((ulong) ansbuf); - parm->ipbfln2f = (__u32) anslen; - parm->ipsrccls = srccls; - parm->ipmsgtag = msgtag; - parm->ipflags1 = flags1; /* priority message */ - - b2f0_result = b2f0(SEND, parm); - - if ((!b2f0_result) && (msgid)) - *msgid = parm->ipmsgid; - release_param(parm); - - iucv_debug(2, "exiting"); - - return b2f0_result; -} - -/* - * Name: iucv_send2way_array - * Purpose: This function transmits data to another application. - * The contents of buffer is the address of the array of - * addresses and lengths of discontiguous buffers that hold - * the message text. The receiver of the send is expected to - * reply to the message and a buffer is provided into which - * IUCV moves the reply to this message. - * Input: pathid - path identification number - * trgcls - specifies target class - * srccls - specifies the source message class - * msgtag - spcifies a tag to be associated with the message - * flags1 - option for path - * IPPRTY- specifies if you want to send priority message - * buffer - address of array of send buffers - * buflen - total length of send buffers - * ansbuf - address of buffer to reply with - * anslen - length of buffer to reply with - * Output: msgid - specifies the message ID. - * Return: b2f0_result - return code from CP - * (-EINVAL) - buffer address is NULL - */ -int -iucv_send2way_array (__u16 pathid, - __u32 * msgid, - __u32 trgcls, - __u32 srccls, - __u32 msgtag, - int flags1, - iucv_array_t * buffer, - ulong buflen, iucv_array_t * ansbuf, ulong anslen) -{ - iparml_db *parm; - ulong b2f0_result; - - iucv_debug(2, "entering"); - - if (!buffer || !ansbuf) - return -EINVAL; - - parm = (iparml_db *)grab_param(); - - parm->ippathid = pathid; - parm->iptrgcls = trgcls; - parm->ipbfadr1 = (__u32) ((ulong) buffer); - parm->ipbfln1f = (__u32) buflen; /* length of message */ - parm->ipbfadr2 = (__u32) ((ulong) ansbuf); - parm->ipbfln2f = (__u32) anslen; - parm->ipsrccls = srccls; - parm->ipmsgtag = msgtag; - parm->ipflags1 = (IPBUFLST | IPANSLST | flags1); - b2f0_result = b2f0(SEND, parm); - if ((!b2f0_result) && (msgid)) - *msgid = parm->ipmsgid; - release_param(parm); - - iucv_debug(2, "exiting"); - return b2f0_result; -} - -/* - * Name: iucv_send2way_prmmsg - * Purpose: This function transmits data to another application. - * Prmmsg specifies that the 8-bytes of data are to be moved - * into the parameter list. This is a two-way message and the - * receiver of the message is expected to reply. A buffer - * is provided into which IUCV moves the reply to this - * message. - * Input: pathid - path identification number - * trgcls - specifies target class - * srccls - specifies the source message class - * msgtag - specifies a tag to be associated with the message - * flags1 - option for path - * IPPRTY- specifies if you want to send priority message - * prmmsg - 8-bytes of data to be placed in parameter list - * ansbuf - address of buffer to reply with - * anslen - length of buffer to reply with - * Output: msgid - specifies the message ID. - * Return: b2f0_result - return code from CP - * (-EINVAL) - buffer address is NULL -*/ -int -iucv_send2way_prmmsg (__u16 pathid, - __u32 * msgid, - __u32 trgcls, - __u32 srccls, - __u32 msgtag, - ulong flags1, __u8 prmmsg[8], void *ansbuf, ulong anslen) -{ - iparml_dpl *parm; - ulong b2f0_result; - - iucv_debug(2, "entering"); - - if (!ansbuf) - return -EINVAL; - - parm = (iparml_dpl *)grab_param(); - - parm->ippathid = pathid; - parm->iptrgcls = trgcls; - parm->ipsrccls = srccls; - parm->ipmsgtag = msgtag; - parm->ipbfadr2 = (__u32) ((ulong) ansbuf); - parm->ipbfln2f = (__u32) anslen; - parm->ipflags1 = (IPRMDATA | flags1); /* message in prmlist */ - memcpy(parm->iprmmsg, prmmsg, sizeof(parm->iprmmsg)); - - b2f0_result = b2f0(SEND, parm); - - if ((!b2f0_result) && (msgid)) - *msgid = parm->ipmsgid; - release_param(parm); - - iucv_debug(2, "exiting"); - - return b2f0_result; -} - -/* - * Name: iucv_send2way_prmmsg_array - * Purpose: This function transmits data to another application. - * Prmmsg specifies that the 8-bytes of data are to be moved - * into the parameter list. This is a two-way message and the - * receiver of the message is expected to reply. A buffer - * is provided into which IUCV moves the reply to this - * message. The contents of ansbuf is the address of the - * array of addresses and lengths of discontiguous buffers - * that contain the reply. - * Input: pathid - path identification number - * trgcls - specifies target class - * srccls - specifies the source message class - * msgtag - specifies a tag to be associated with the message - * flags1 - option for path - * IPPRTY- specifies if you want to send priority message - * prmmsg - 8-bytes of data to be placed into the parameter list - * ansbuf - address of buffer to reply with - * anslen - length of buffer to reply with - * Output: msgid - specifies the message ID. - * Return: b2f0_result - return code from CP - * (-EINVAL) - ansbuf address is NULL - */ -int -iucv_send2way_prmmsg_array (__u16 pathid, - __u32 * msgid, - __u32 trgcls, - __u32 srccls, - __u32 msgtag, - int flags1, - __u8 prmmsg[8], - iucv_array_t * ansbuf, ulong anslen) -{ - iparml_dpl *parm; - ulong b2f0_result; - - iucv_debug(2, "entering"); - - if (!ansbuf) - return -EINVAL; - - parm = (iparml_dpl *)grab_param(); - - parm->ippathid = pathid; - parm->iptrgcls = trgcls; - parm->ipsrccls = srccls; - parm->ipmsgtag = msgtag; - parm->ipbfadr2 = (__u32) ((ulong) ansbuf); - parm->ipbfln2f = (__u32) anslen; - parm->ipflags1 = (IPRMDATA | IPANSLST | flags1); - memcpy(parm->iprmmsg, prmmsg, sizeof(parm->iprmmsg)); - b2f0_result = b2f0(SEND, parm); - if ((!b2f0_result) && (msgid)) - *msgid = parm->ipmsgid; - release_param(parm); - - iucv_debug(2, "exiting"); - return b2f0_result; -} - -void -iucv_setmask_cpuid (void *result) -{ - iparml_set_mask *parm; - - iucv_debug(1, "entering"); - parm = (iparml_set_mask *)grab_param(); - parm->ipmask = *((__u8*)result); - *((ulong *)result) = b2f0(SETMASK, parm); - release_param(parm); - - iucv_debug(1, "b2f0_result = %ld", *((ulong *)result)); - iucv_debug(1, "exiting"); -} - -/* - * Name: iucv_setmask - * Purpose: This function enables or disables the following IUCV - * external interruptions: Nonpriority and priority message - * interrupts, nonpriority and priority reply interrupts. - * Input: SetMaskFlag - options for interrupts - * 0x80 - Nonpriority_MessagePendingInterruptsFlag - * 0x40 - Priority_MessagePendingInterruptsFlag - * 0x20 - Nonpriority_MessageCompletionInterruptsFlag - * 0x10 - Priority_MessageCompletionInterruptsFlag - * 0x08 - IUCVControlInterruptsFlag - * Output: NA - * Return: b2f0_result - return code from CP -*/ -int -iucv_setmask (int SetMaskFlag) -{ - union { - ulong result; - __u8 param; - } u; - int cpu; - - u.param = SetMaskFlag; - cpu = get_cpu(); - smp_call_function_on(iucv_setmask_cpuid, &u, 0, 1, iucv_cpuid); - put_cpu(); - - return u.result; -} - -/** - * iucv_sever: - * @pathid: Path identification number - * @user_data: 16-byte of user data - * - * This function terminates an iucv path. - * Returns: return code from CP - */ -int -iucv_sever(__u16 pathid, __u8 user_data[16]) -{ - iparml_control *parm; - ulong b2f0_result = 0; - - iucv_debug(1, "entering"); - parm = (iparml_control *)grab_param(); - - memcpy(parm->ipuser, user_data, sizeof(parm->ipuser)); - parm->ippathid = pathid; - - b2f0_result = b2f0(SEVER, parm); - - if (!b2f0_result) - iucv_remove_pathid(pathid); - release_param(parm); - - iucv_debug(1, "exiting"); - return b2f0_result; -} - -/* - * Interrupt Handlers - *******************************************************************************/ - -/** - * iucv_irq_handler: - * @regs: Current registers - * @code: irq code - * - * Handles external interrupts coming in from CP. - * Places the interrupt buffer on a queue and schedules iucv_tasklet_handler(). - */ -static void -iucv_irq_handler(__u16 code) -{ - iucv_irqdata *irqdata; - - irqdata = kmalloc(sizeof(iucv_irqdata), GFP_ATOMIC); - if (!irqdata) { - printk(KERN_WARNING "%s: out of memory\n", __FUNCTION__); - return; - } - - memcpy(&irqdata->data, iucv_external_int_buffer, - sizeof(iucv_GeneralInterrupt)); - - spin_lock(&iucv_irq_queue_lock); - list_add_tail(&irqdata->queue, &iucv_irq_queue); - spin_unlock(&iucv_irq_queue_lock); - - tasklet_schedule(&iucv_tasklet); -} - -/** - * iucv_do_int: - * @int_buf: Pointer to copy of external interrupt buffer - * - * The workhorse for handling interrupts queued by iucv_irq_handler(). - * This function is called from the bottom half iucv_tasklet_handler(). - */ -static void -iucv_do_int(iucv_GeneralInterrupt * int_buf) -{ - handler *h = NULL; - struct list_head *lh; - ulong flags; - iucv_interrupt_ops_t *interrupt = NULL; /* interrupt addresses */ - __u8 temp_buff1[24], temp_buff2[24]; /* masked handler id. */ - int rc = 0, j = 0; - __u8 no_listener[16] = "NO LISTENER"; - - iucv_debug(2, "entering, pathid %d, type %02X", - int_buf->ippathid, int_buf->iptype); - iucv_dumpit("External Interrupt Buffer:", - int_buf, sizeof(iucv_GeneralInterrupt)); - - ASCEBC (no_listener, 16); - - if (int_buf->iptype != 01) { - if ((int_buf->ippathid) > (max_connections - 1)) { - printk(KERN_WARNING "%s: Got interrupt with pathid %d" - " > max_connections (%ld)\n", __FUNCTION__, - int_buf->ippathid, max_connections - 1); - } else { - h = iucv_pathid_table[int_buf->ippathid]; - interrupt = h->interrupt_table; - iucv_dumpit("Handler:", h, sizeof(handler)); - } - } - - /* end of if statement */ - switch (int_buf->iptype) { - case 0x01: /* connection pending */ - if (messagesDisabled) { - iucv_setmask(~0); - messagesDisabled = 0; - } - spin_lock_irqsave(&iucv_lock, flags); - list_for_each(lh, &iucv_handler_table) { - h = list_entry(lh, handler, list); - memcpy(temp_buff1, &(int_buf->ipvmid), 24); - memcpy(temp_buff2, &(h->id.userid), 24); - for (j = 0; j < 24; j++) { - temp_buff1[j] &= (h->id.mask)[j]; - temp_buff2[j] &= (h->id.mask)[j]; - } - - iucv_dumpit("temp_buff1:", - temp_buff1, sizeof(temp_buff1)); - iucv_dumpit("temp_buff2", - temp_buff2, sizeof(temp_buff2)); - - if (!memcmp (temp_buff1, temp_buff2, 24)) { - - iucv_debug(2, - "found a matching handler"); - break; - } else - h = NULL; - } - spin_unlock_irqrestore (&iucv_lock, flags); - if (h) { - /* ADD PATH TO PATHID TABLE */ - rc = iucv_add_pathid(int_buf->ippathid, h); - if (rc) { - iucv_sever (int_buf->ippathid, - no_listener); - iucv_debug(1, - "add_pathid failed, rc = %d", - rc); - } else { - interrupt = h->interrupt_table; - if (interrupt->ConnectionPending) { - EBCASC (int_buf->ipvmid, 8); - interrupt->ConnectionPending( - (iucv_ConnectionPending *)int_buf, - h->pgm_data); - } else - iucv_sever(int_buf->ippathid, - no_listener); - } - } else - iucv_sever(int_buf->ippathid, no_listener); - break; - - case 0x02: /*connection complete */ - if (messagesDisabled) { - iucv_setmask(~0); - messagesDisabled = 0; - } - if (h) { - if (interrupt->ConnectionComplete) - { - interrupt->ConnectionComplete( - (iucv_ConnectionComplete *)int_buf, - h->pgm_data); - } - else - iucv_debug(1, - "ConnectionComplete not called"); - } else - iucv_sever(int_buf->ippathid, no_listener); - break; - - case 0x03: /* connection severed */ - if (messagesDisabled) { - iucv_setmask(~0); - messagesDisabled = 0; - } - if (h) { - if (interrupt->ConnectionSevered) - interrupt->ConnectionSevered( - (iucv_ConnectionSevered *)int_buf, - h->pgm_data); - - else - iucv_sever (int_buf->ippathid, no_listener); - } else - iucv_sever(int_buf->ippathid, no_listener); - break; - - case 0x04: /* connection quiesced */ - if (messagesDisabled) { - iucv_setmask(~0); - messagesDisabled = 0; - } - if (h) { - if (interrupt->ConnectionQuiesced) - interrupt->ConnectionQuiesced( - (iucv_ConnectionQuiesced *)int_buf, - h->pgm_data); - else - iucv_debug(1, - "ConnectionQuiesced not called"); - } - break; - - case 0x05: /* connection resumed */ - if (messagesDisabled) { - iucv_setmask(~0); - messagesDisabled = 0; - } - if (h) { - if (interrupt->ConnectionResumed) - interrupt->ConnectionResumed( - (iucv_ConnectionResumed *)int_buf, - h->pgm_data); - else - iucv_debug(1, - "ConnectionResumed not called"); - } - break; - - case 0x06: /* priority message complete */ - case 0x07: /* nonpriority message complete */ - if (h) { - if (interrupt->MessageComplete) - interrupt->MessageComplete( - (iucv_MessageComplete *)int_buf, - h->pgm_data); - else - iucv_debug(2, - "MessageComplete not called"); - } - break; - - case 0x08: /* priority message pending */ - case 0x09: /* nonpriority message pending */ - if (h) { - if (interrupt->MessagePending) - interrupt->MessagePending( - (iucv_MessagePending *) int_buf, - h->pgm_data); - else - iucv_debug(2, - "MessagePending not called"); - } - break; - default: /* unknown iucv type */ - printk(KERN_WARNING "%s: unknown iucv interrupt\n", - __FUNCTION__); - break; - } /* end switch */ - - iucv_debug(2, "exiting pathid %d, type %02X", - int_buf->ippathid, int_buf->iptype); - - return; -} - -/** - * iucv_tasklet_handler: - * - * This function loops over the queue of irq buffers and runs iucv_do_int() - * on every queue element. - */ -static void -iucv_tasklet_handler(unsigned long ignored) -{ - struct list_head head; - struct list_head *next; - ulong flags; - - spin_lock_irqsave(&iucv_irq_queue_lock, flags); - list_add(&head, &iucv_irq_queue); - list_del_init(&iucv_irq_queue); - spin_unlock_irqrestore (&iucv_irq_queue_lock, flags); - - next = head.next; - while (next != &head) { - iucv_irqdata *p = list_entry(next, iucv_irqdata, queue); - - next = next->next; - iucv_do_int(&p->data); - kfree(p); - } - - return; -} - -subsys_initcall(iucv_init); -module_exit(iucv_exit); - -/** - * Export all public stuff - */ -EXPORT_SYMBOL (iucv_bus); -EXPORT_SYMBOL (iucv_root); -EXPORT_SYMBOL (iucv_accept); -EXPORT_SYMBOL (iucv_connect); -#if 0 -EXPORT_SYMBOL (iucv_purge); -EXPORT_SYMBOL (iucv_query_maxconn); -EXPORT_SYMBOL (iucv_query_bufsize); -EXPORT_SYMBOL (iucv_quiesce); -#endif -EXPORT_SYMBOL (iucv_receive); -#if 0 -EXPORT_SYMBOL (iucv_receive_array); -#endif -EXPORT_SYMBOL (iucv_reject); -#if 0 -EXPORT_SYMBOL (iucv_reply); -EXPORT_SYMBOL (iucv_reply_array); -EXPORT_SYMBOL (iucv_resume); -#endif -EXPORT_SYMBOL (iucv_reply_prmmsg); -EXPORT_SYMBOL (iucv_send); -EXPORT_SYMBOL (iucv_send2way); -EXPORT_SYMBOL (iucv_send2way_array); -EXPORT_SYMBOL (iucv_send2way_prmmsg); -EXPORT_SYMBOL (iucv_send2way_prmmsg_array); -#if 0 -EXPORT_SYMBOL (iucv_send_array); -EXPORT_SYMBOL (iucv_send_prmmsg); -EXPORT_SYMBOL (iucv_setmask); -#endif -EXPORT_SYMBOL (iucv_sever); -EXPORT_SYMBOL (iucv_register_program); -EXPORT_SYMBOL (iucv_unregister_program); |