diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_attr.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_attr.c | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index e058f10..82005b8 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -23,6 +23,7 @@ #include <linux/delay.h> #include <linux/pci.h> #include <linux/interrupt.h> +#include <linux/aer.h> #include <scsi/scsi.h> #include <scsi/scsi_device.h> @@ -2766,6 +2767,179 @@ static DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR, lpfc_link_speed_show, lpfc_link_speed_store); /* +# lpfc_aer_support: Support PCIe device Advanced Error Reporting (AER) +# 0 = aer disabled or not supported +# 1 = aer supported and enabled (default) +# Value range is [0,1]. Default value is 1. +*/ + +/** + * lpfc_aer_support_store - Set the adapter for aer support + * + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: containing the string "selective". + * @count: unused variable. + * + * Description: + * If the val is 1 and currently the device's AER capability was not + * enabled, invoke the kernel's enable AER helper routine, trying to + * enable the device's AER capability. If the helper routine enabling + * AER returns success, update the device's cfg_aer_support flag to + * indicate AER is supported by the device; otherwise, if the device + * AER capability is already enabled to support AER, then do nothing. + * + * If the val is 0 and currently the device's AER support was enabled, + * invoke the kernel's disable AER helper routine. After that, update + * the device's cfg_aer_support flag to indicate AER is not supported + * by the device; otherwise, if the device AER capability is already + * disabled from supporting AER, then do nothing. + * + * Returns: + * length of the buf on success if val is in range the intended mode + * is supported. + * -EINVAL if val out of range or intended mode is not supported. + **/ +static ssize_t +lpfc_aer_support_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int val = 0, rc = -EINVAL; + + if (!isdigit(buf[0])) + return -EINVAL; + if (sscanf(buf, "%i", &val) != 1) + return -EINVAL; + + switch (val) { + case 0: + if (phba->hba_flag & HBA_AER_ENABLED) { + rc = pci_disable_pcie_error_reporting(phba->pcidev); + if (!rc) { + spin_lock_irq(&phba->hbalock); + phba->hba_flag &= ~HBA_AER_ENABLED; + spin_unlock_irq(&phba->hbalock); + phba->cfg_aer_support = 0; + rc = strlen(buf); + } else + rc = -EINVAL; + } else + phba->cfg_aer_support = 0; + rc = strlen(buf); + break; + case 1: + if (!(phba->hba_flag & HBA_AER_ENABLED)) { + rc = pci_enable_pcie_error_reporting(phba->pcidev); + if (!rc) { + spin_lock_irq(&phba->hbalock); + phba->hba_flag |= HBA_AER_ENABLED; + spin_unlock_irq(&phba->hbalock); + phba->cfg_aer_support = 1; + rc = strlen(buf); + } else + rc = -EINVAL; + } else + phba->cfg_aer_support = 1; + rc = strlen(buf); + break; + default: + rc = -EINVAL; + break; + } + return rc; +} + +static int lpfc_aer_support = 1; +module_param(lpfc_aer_support, int, 1); +MODULE_PARM_DESC(lpfc_aer_support, "Enable PCIe device AER support"); +lpfc_param_show(aer_support) + +/** + * lpfc_aer_support_init - Set the initial adapters aer support flag + * @phba: lpfc_hba pointer. + * @val: link speed value. + * + * Description: + * If val is in a valid range [0,1], then set the adapter's initial + * cfg_aer_support field. It will be up to the driver's probe_one + * routine to determine whether the device's AER support can be set + * or not. + * + * Notes: + * If the value is not in range log a kernel error message, and + * choose the default value of setting AER support and return. + * + * Returns: + * zero if val saved. + * -EINVAL val out of range + **/ +static int +lpfc_aer_support_init(struct lpfc_hba *phba, int val) +{ + if (val == 0 || val == 1) { + phba->cfg_aer_support = val; + return 0; + } + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2712 lpfc_aer_support attribute value %d out " + "of range, allowed values are 0|1, setting it " + "to default value of 1\n", val); + phba->cfg_aer_support = 1; + return -EINVAL; +} + +static DEVICE_ATTR(lpfc_aer_support, S_IRUGO | S_IWUSR, + lpfc_aer_support_show, lpfc_aer_support_store); + +/** + * lpfc_aer_cleanup_state - Clean up aer state to the aer enabled device + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: containing the string "selective". + * @count: unused variable. + * + * Description: + * If the @buf contains 1 and the device currently has the AER support + * enabled, then invokes the kernel AER helper routine + * pci_cleanup_aer_uncorrect_error_status to clean up the uncorrectable + * error status register. + * + * Notes: + * + * Returns: + * -EINVAL if the buf does not contain the 1 or the device is not currently + * enabled with the AER support. + **/ +static ssize_t +lpfc_aer_cleanup_state(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int val, rc = -1; + + if (!isdigit(buf[0])) + return -EINVAL; + if (sscanf(buf, "%i", &val) != 1) + return -EINVAL; + + if (val == 1 && phba->hba_flag & HBA_AER_ENABLED) + rc = pci_cleanup_aer_uncorrect_error_status(phba->pcidev); + + if (rc == 0) + return strlen(buf); + else + return -EINVAL; +} + +static DEVICE_ATTR(lpfc_aer_state_cleanup, S_IWUSR, NULL, + lpfc_aer_cleanup_state); + +/* # lpfc_fcp_class: Determines FC class to use for the FCP protocol. # Value range is [2,3]. Default value is 3. */ @@ -3068,6 +3242,8 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_max_scsicmpl_time, &dev_attr_lpfc_stat_data_ctrl, &dev_attr_lpfc_prot_sg_seg_cnt, + &dev_attr_lpfc_aer_support, + &dev_attr_lpfc_aer_state_cleanup, NULL, }; @@ -4244,6 +4420,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth); lpfc_enable_fip_init(phba, lpfc_enable_fip); lpfc_hba_log_verbose_init(phba, lpfc_log_verbose); + lpfc_aer_support_init(phba, lpfc_aer_support); return; } |