diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_init.c')
-rw-r--r-- | drivers/scsi/lpfc/lpfc_init.c | 96 |
1 files changed, 72 insertions, 24 deletions
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 12ab1ea..6192583 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -28,6 +28,7 @@ #include <linux/pci.h> #include <linux/spinlock.h> #include <linux/ctype.h> +#include <linux/aer.h> #include <scsi/scsi.h> #include <scsi/scsi_device.h> @@ -7098,6 +7099,7 @@ lpfc_pci_resume_one_s3(struct pci_dev *pdev) /* Restore device state from PCI config space */ pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); + if (pdev->is_busmaster) pci_set_master(pdev); @@ -7132,6 +7134,53 @@ lpfc_pci_resume_one_s3(struct pci_dev *pdev) } /** + * lpfc_sli_prep_dev_for_reset - Prepare SLI3 device for pci slot reset + * @phba: pointer to lpfc hba data structure. + * + * This routine is called to prepare the SLI3 device for PCI slot reset. It + * disables the device interrupt and pci device, and aborts the internal FCP + * pending I/Os. + **/ +static void +lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba) +{ + struct lpfc_sli *psli = &phba->sli; + struct lpfc_sli_ring *pring; + + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2710 PCI channel I/O frozen\n"); + /* Disable interrupt and pci device */ + lpfc_sli_disable_intr(phba); + pci_disable_device(phba->pcidev); + /* + * There may be I/Os dropped by the firmware. + * Error iocb (I/O) on txcmplq and let the SCSI layer + * retry it after re-establishing link. + */ + pring = &psli->ring[psli->fcp_ring]; + lpfc_sli_abort_iocb_ring(phba, pring); +} + +/** + * lpfc_sli_prep_dev_for_perm_failure - Prepare SLI3 dev for pci slot disable + * @phba: pointer to lpfc hba data structure. + * + * This routine is called to prepare the SLI3 device for PCI slot permanently + * disabling. It blocks the SCSI transport layer traffic and flushes the FCP + * pending I/Os. + **/ +static void +lpfc_prep_dev_for_perm_failure(struct lpfc_hba *phba) +{ + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2711 PCI channel I/O permanent failure\n"); + /* Block all SCSI devices' I/Os on the host */ + lpfc_scsi_dev_block(phba); + /* Clean up all driver's outstanding SCSI I/Os */ + lpfc_sli_flush_fcp_rings(phba); +} + +/** * lpfc_io_error_detected_s3 - Method for handling SLI-3 device PCI I/O error * @pdev: pointer to PCI device. * @state: the current PCI connection state. @@ -7145,6 +7194,7 @@ lpfc_pci_resume_one_s3(struct pci_dev *pdev) * as desired. * * Return codes + * PCI_ERS_RESULT_CAN_RECOVER - can be recovered with reset_link * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery * PCI_ERS_RESULT_DISCONNECT - device could not be recovered **/ @@ -7153,33 +7203,26 @@ lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state) { struct Scsi_Host *shost = pci_get_drvdata(pdev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; - struct lpfc_sli *psli = &phba->sli; - struct lpfc_sli_ring *pring; - if (state == pci_channel_io_perm_failure) { - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "0472 PCI channel I/O permanent failure\n"); - /* Block all SCSI devices' I/Os on the host */ - lpfc_scsi_dev_block(phba); - /* Clean up all driver's outstanding SCSI I/Os */ - lpfc_sli_flush_fcp_rings(phba); + switch (state) { + case pci_channel_io_normal: + /* Non-fatal error, do nothing */ + return PCI_ERS_RESULT_CAN_RECOVER; + case pci_channel_io_frozen: + /* Fatal error, prepare for slot reset */ + lpfc_sli_prep_dev_for_reset(phba); + return PCI_ERS_RESULT_NEED_RESET; + case pci_channel_io_perm_failure: + /* Permanent failure, prepare for device down */ + lpfc_prep_dev_for_perm_failure(phba); return PCI_ERS_RESULT_DISCONNECT; + default: + /* Unknown state, prepare and request slot reset */ + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0472 Unknown PCI error state: x%x\n", state); + lpfc_sli_prep_dev_for_reset(phba); + return PCI_ERS_RESULT_NEED_RESET; } - - pci_disable_device(pdev); - /* - * There may be I/Os dropped by the firmware. - * Error iocb (I/O) on txcmplq and let the SCSI layer - * retry it after re-establishing link. - */ - pring = &psli->ring[psli->fcp_ring]; - lpfc_sli_abort_iocb_ring(phba, pring); - - /* Disable interrupt */ - lpfc_sli_disable_intr(phba); - - /* Request a slot reset. */ - return PCI_ERS_RESULT_NEED_RESET; } /** @@ -7259,7 +7302,12 @@ lpfc_io_resume_s3(struct pci_dev *pdev) struct Scsi_Host *shost = pci_get_drvdata(pdev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; + /* Bring the device online */ lpfc_online(phba); + + /* Clean up Advanced Error Reporting (AER) if needed */ + if (phba->hba_flag & HBA_AER_ENABLED) + pci_cleanup_aer_uncorrect_error_status(pdev); } /** |