diff options
Diffstat (limited to 'drivers/scsi/mpt3sas')
| -rw-r--r-- | drivers/scsi/mpt3sas/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2.h | 12 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 15 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_init.h | 2 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 10 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_raid.h | 10 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_sas.h | 2 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_tool.h | 10 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_type.h | 2 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_base.c | 22 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_base.h | 8 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_config.c | 2 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_ctl.c | 2 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_ctl.h | 2 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_debug.h | 2 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_scsih.c | 54 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_transport.c | 2 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c | 2 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h | 2 |
19 files changed, 103 insertions, 60 deletions
diff --git a/drivers/scsi/mpt3sas/Kconfig b/drivers/scsi/mpt3sas/Kconfig index 81471bf..d53e1b0 100644 --- a/drivers/scsi/mpt3sas/Kconfig +++ b/drivers/scsi/mpt3sas/Kconfig @@ -2,7 +2,7 @@ # Kernel configuration file for the MPT3SAS # # This code is based on drivers/scsi/mpt3sas/Kconfig -# Copyright (C) 2012 LSI Corporation +# Copyright (C) 2012-2013 LSI Corporation # (mailto:DL-MPTFusionLinux@lsi.com) # This program is free software; you can redistribute it and/or diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h index 03317ff..20da8f9 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2000-2012 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2.h @@ -8,7 +8,7 @@ * scatter/gather formats. * Creation Date: June 21, 2006 * - * mpi2.h Version: 02.00.26 + * mpi2.h Version: 02.00.29 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -82,6 +82,10 @@ * 03-29-12 02.00.25 Bumped MPI2_HEADER_VERSION_UNIT. * Added Hard Reset delay timings. * 07-10-12 02.00.26 Bumped MPI2_HEADER_VERSION_UNIT. + * 07-26-12 02.00.27 Bumped MPI2_HEADER_VERSION_UNIT. + * 11-27-12 02.00.28 Bumped MPI2_HEADER_VERSION_UNIT. + * 12-20-12 02.00.29 Bumped MPI2_HEADER_VERSION_UNIT. + * Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET. * -------------------------------------------------------------------------- */ @@ -115,7 +119,7 @@ #define MPI2_VERSION_02_05 (0x0205) /*Unit and Dev versioning for this MPI header set */ -#define MPI2_HEADER_VERSION_UNIT (0x1A) +#define MPI2_HEADER_VERSION_UNIT (0x1D) #define MPI2_HEADER_VERSION_DEV (0x00) #define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00) #define MPI2_HEADER_VERSION_UNIT_SHIFT (8) @@ -274,6 +278,8 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS { #define MPI2_REPLY_POST_HOST_INDEX_MASK (0x00FFFFFF) #define MPI2_RPHI_MSIX_INDEX_MASK (0xFF000000) #define MPI2_RPHI_MSIX_INDEX_SHIFT (24) +#define MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET (0x0000030C) /*MPI v2.5 only*/ + /* *Defines for the HCBSize and address diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h index d8b2c3e..889aa70 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2011 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_cnfg.h * Title: MPI Configuration messages and pages * Creation Date: November 10, 2006 * - * mpi2_cnfg.h Version: 02.00.22 + * mpi2_cnfg.h Version: 02.00.24 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -155,6 +155,11 @@ * Added UEFIVersion field to BIOS Page 1 and defined new * BiosOptions bits. * Incorporating additions for MPI v2.5. + * 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER. + * Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID. + * 12-20-12 02.00.24 Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as + * obsolete for MPI v2.5 and later. + * Added some defines for 12G SAS speeds. * -------------------------------------------------------------------------- */ @@ -714,6 +719,7 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_7 { #define MPI2_MANUFACTURING7_PAGEVERSION (0x01) /*defines for the Flags field */ +#define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER (0x00000002) #define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001) @@ -1310,6 +1316,9 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 { #define MPI2_BIOSPAGE1_PAGEVERSION (0x05) /*values for BIOS Page 1 BiosOptions field */ +#define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0) +#define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000) + #define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006) #define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000) #define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002) @@ -1884,6 +1893,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 { #define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80) #define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90) #define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0) +#define MPI25_SAS_PRATE_MAX_RATE_12_0 (0xB0) #define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F) #define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00) #define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08) @@ -1897,6 +1907,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 { #define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80) #define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90) #define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0) +#define MPI25_SAS_HWRATE_MAX_RATE_12_0 (0xB0) #define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F) #define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08) #define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09) diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h index a079e52..f7928bf 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_init.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2000-2012 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_init.h diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h index 0de425d..e2bb821 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2012 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_ioc.h * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: October 11, 2006 * - * mpi2_ioc.h Version: 02.00.21 + * mpi2_ioc.h Version: 02.00.22 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -124,6 +124,9 @@ * Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete. * 11-18-11 02.00.20 Incorporating additions for MPI v2.5. * 03-29-12 02.00.21 Added a product specific range to event values. + * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE. + * Added ElapsedSeconds field to + * MPI2_EVENT_DATA_IR_OPERATION_STATUS. * -------------------------------------------------------------------------- */ @@ -283,6 +286,7 @@ typedef struct _MPI2_IOC_FACTS_REPLY { #define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0) /*IOCExceptions */ +#define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200) #define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100) #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0) @@ -634,7 +638,7 @@ typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS { U8 RAIDOperation; /*0x04 */ U8 PercentComplete; /*0x05 */ U16 Reserved2; /*0x06 */ - U32 Resereved3; /*0x08 */ + U32 ElapsedSeconds; /*0x08 */ } MPI2_EVENT_DATA_IR_OPERATION_STATUS, *PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS, Mpi2EventDataIrOperationStatus_t, diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_raid.h b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h index d1d9866..7176523 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_raid.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2012 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_raid.h * Title: MPI Integrated RAID messages and structures * Creation Date: April 26, 2007 * - * mpi2_raid.h Version: 02.00.08 + * mpi2_raid.h Version: 02.00.09 * * Version History * --------------- @@ -28,6 +28,8 @@ * Added product-specific range to RAID Action values. * 11-18-11 02.00.07 Incorporating additions for MPI v2.5. * 02-06-12 02.00.08 Added MPI2_RAID_ACTION_PHYSDISK_HIDDEN. + * 07-26-12 02.00.09 Added ElapsedSeconds field to MPI2_RAID_VOL_INDICATOR. + * Added MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID define. * -------------------------------------------------------------------------- */ @@ -269,10 +271,12 @@ typedef struct _MPI2_RAID_VOL_INDICATOR { U64 TotalBlocks; /*0x00 */ U64 BlocksRemaining; /*0x08 */ U32 Flags; /*0x10 */ + U32 ElapsedSeconds; /* 0x14 */ } MPI2_RAID_VOL_INDICATOR, *PTR_MPI2_RAID_VOL_INDICATOR, Mpi2RaidVolIndicator_t, *pMpi2RaidVolIndicator_t; /*defines for RAID Volume Indicator Flags field */ +#define MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID (0x80000000) #define MPI2_RAID_VOL_FLAGS_OP_MASK (0x0000000F) #define MPI2_RAID_VOL_FLAGS_OP_BACKGROUND_INIT (0x00000000) #define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001) @@ -312,7 +316,7 @@ typedef struct _MPI2_RAID_COMPATIBILITY_RESULT_STRUCT { /*RAID Action Reply ActionData union */ typedef union _MPI2_RAID_ACTION_REPLY_DATA { - U32 Word[5]; + U32 Word[6]; MPI2_RAID_VOL_INDICATOR RaidVolumeIndicator; U16 VolDevHandle; U8 VolumeState; diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_sas.h b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h index b4e7084a..cba046f 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_sas.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2000-2012 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_sas.h diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h index 71453d1..34e9a7b 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2012 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_tool.h * Title: MPI diagnostic tool structures and definitions * Creation Date: March 26, 2007 * - * mpi2_tool.h Version: 02.00.09 + * mpi2_tool.h Version: 02.00.10 * * Version History * --------------- @@ -30,6 +30,8 @@ * 11-18-11 02.00.08 Incorporating additions for MPI v2.5. * 07-10-12 02.00.09 Add MPI v2.5 Toolbox Diagnostic CLI Tool Request * message. + * 07-26-12 02.00.10 Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that + * it uses MPI Chain SGE as well as MPI Simple SGE. * -------------------------------------------------------------------------- */ @@ -279,7 +281,7 @@ typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST { U16 Reserved6; /*0x0E */ U32 DataLength; /*0x10 */ U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];/*0x14 */ - MPI2_SGE_SIMPLE_UNION SGL; /*0x70 */ + MPI2_MPI_SGE_IO_UNION SGL; /*0x70 */ } MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST, *PTR_MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST, Mpi2ToolboxDiagnosticCliRequest_t, @@ -302,7 +304,7 @@ typedef struct _MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST { U32 Reserved5; /*0x0C */ U32 DataLength; /*0x10 */ U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];/*0x14 */ - MPI25_SGE_IO_UNION SGL; /*0x70 */ + MPI25_SGE_IO_UNION SGL; /* 0x70 */ } MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST, *PTR_MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST, Mpi25ToolboxDiagnosticCliRequest_t, diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_type.h b/drivers/scsi/mpt3sas/mpi/mpi2_type.h index 516f959..ba1fed5 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_type.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_type.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2000-2007 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_type.h diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 1836003..5dc280c 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -3,7 +3,7 @@ * for access to MPT (Message Passing Technology) firmware. * * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c - * Copyright (C) 2012 LSI Corporation + * Copyright (C) 2012-2013 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or @@ -4090,11 +4090,15 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER, &ioc->chip->HostDiagnostic); - /* don't access any registers for 50 milliseconds */ - msleep(50); + /*This delay allows the chip PCIe hardware time to finish reset tasks*/ + if (sleep_flag == CAN_SLEEP) + msleep(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000); + else + mdelay(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000); - /* 300 second max wait */ - for (count = 0; count < 3000000 ; count++) { + /* Approximately 300 second max wait */ + for (count = 0; count < (300000000 / + MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) { host_diagnostic = readl(&ioc->chip->HostDiagnostic); @@ -4103,11 +4107,13 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER)) break; - /* wait 1 msec */ + /* Wait to pass the second read delay window */ if (sleep_flag == CAN_SLEEP) - usleep_range(1000, 1500); + msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC + / 1000); else - mdelay(1); + mdelay(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC + / 1000); } if (host_diagnostic & MPI2_DIAG_HCB_MODE) { diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 994656c..0ebf5d9 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -3,7 +3,7 @@ * for access to MPT (Message Passing Technology) firmware. * * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h - * Copyright (C) 2012 LSI Corporation + * Copyright (C) 2012-2013 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or @@ -70,10 +70,10 @@ #define MPT3SAS_DRIVER_NAME "mpt3sas" #define MPT3SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>" #define MPT3SAS_DESCRIPTION "LSI MPT Fusion SAS 3.0 Device Driver" -#define MPT3SAS_DRIVER_VERSION "01.100.01.00" -#define MPT3SAS_MAJOR_VERSION 1 +#define MPT3SAS_DRIVER_VERSION "02.100.00.00" +#define MPT3SAS_MAJOR_VERSION 2 #define MPT3SAS_MINOR_VERSION 100 -#define MPT3SAS_BUILD_VERSION 1 +#define MPT3SAS_BUILD_VERSION 0 #define MPT3SAS_RELEASE_VERSION 00 /* diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c index 4db0c7a..936ec03 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_config.c +++ b/drivers/scsi/mpt3sas/mpt3sas_config.c @@ -2,7 +2,7 @@ * This module provides common API for accessing firmware configuration pages * * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c - * Copyright (C) 2012 LSI Corporation + * Copyright (C) 2012-2013 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index 0b402b6..9b89de1 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -3,7 +3,7 @@ * controllers * * This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.c - * Copyright (C) 2012 LSI Corporation + * Copyright (C) 2012-2013 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.h b/drivers/scsi/mpt3sas/mpt3sas_ctl.h index bd89f4f..53b0c48 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.h +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.h @@ -3,7 +3,7 @@ * controllers * * This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.h - * Copyright (C) 2012 LSI Corporation + * Copyright (C) 2012-2013 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or diff --git a/drivers/scsi/mpt3sas/mpt3sas_debug.h b/drivers/scsi/mpt3sas/mpt3sas_debug.h index 35405e7..545b22d 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_debug.h +++ b/drivers/scsi/mpt3sas/mpt3sas_debug.h @@ -2,7 +2,7 @@ * Logging Support for MPT (Message Passing Technology) based controllers * * This code is based on drivers/scsi/mpt3sas/mpt3sas_debug.c - * Copyright (C) 2012 LSI Corporation + * Copyright (C) 2012-2013 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index dcbf7c8..8cbe8fd 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -2,7 +2,7 @@ * Scsi Host Layer for MPT (Message Passing Technology) based controllers * * This code is based on drivers/scsi/mpt3sas/mpt3sas_scsih.c - * Copyright (C) 2012 LSI Corporation + * Copyright (C) 2012-2013 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or @@ -675,11 +675,12 @@ _scsih_sas_device_add(struct MPT3SAS_ADAPTER *ioc, * devices while scanning is turned on due to an oops in * scsi_sysfs_add_sdev()->add_device()->sysfs_addrm_start() */ - if (!ioc->is_driver_loading) + if (!ioc->is_driver_loading) { mpt3sas_transport_port_remove(ioc, sas_device->sas_address, sas_device->sas_address_parent); - _scsih_sas_device_remove(ioc, sas_device); + _scsih_sas_device_remove(ioc, sas_device); + } } } @@ -1273,6 +1274,7 @@ _scsih_slave_alloc(struct scsi_device *sdev) struct MPT3SAS_DEVICE *sas_device_priv_data; struct scsi_target *starget; struct _raid_device *raid_device; + struct _sas_device *sas_device; unsigned long flags; sas_device_priv_data = kzalloc(sizeof(struct scsi_device), GFP_KERNEL); @@ -1301,6 +1303,19 @@ _scsih_slave_alloc(struct scsi_device *sdev) spin_unlock_irqrestore(&ioc->raid_device_lock, flags); } + if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc, + sas_target_priv_data->sas_address); + if (sas_device && (sas_device->starget == NULL)) { + sdev_printk(KERN_INFO, sdev, + "%s : sas_device->starget set to starget @ %d\n", + __func__, __LINE__); + sas_device->starget = starget; + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + } + return 0; } @@ -6392,7 +6407,7 @@ _scsih_search_responding_sas_devices(struct MPT3SAS_ADAPTER *ioc) handle))) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; - if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) break; handle = le16_to_cpu(sas_device_pg0.DevHandle); device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); @@ -6494,7 +6509,7 @@ _scsih_search_responding_raid_devices(struct MPT3SAS_ADAPTER *ioc) &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; - if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) break; handle = le16_to_cpu(volume_pg1.DevHandle); @@ -6518,7 +6533,7 @@ _scsih_search_responding_raid_devices(struct MPT3SAS_ADAPTER *ioc) phys_disk_num))) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; - if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) break; phys_disk_num = pd_pg0.PhysDiskNum; handle = le16_to_cpu(pd_pg0.DevHandle); @@ -6597,7 +6612,7 @@ _scsih_search_responding_expanders(struct MPT3SAS_ADAPTER *ioc) ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; - if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) break; handle = le16_to_cpu(expander_pg0.DevHandle); @@ -6742,8 +6757,6 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; - if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) - break; if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { pr_info(MPT3SAS_FMT "\tbreak from expander scan: " \ "ioc_status(0x%04x), loginfo(0x%08x)\n", @@ -6787,8 +6800,6 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) phys_disk_num))) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; - if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) - break; if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { pr_info(MPT3SAS_FMT "\tbreak from phys disk scan: "\ "ioc_status(0x%04x), loginfo(0x%08x)\n", @@ -6854,8 +6865,6 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; - if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) - break; if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { pr_info(MPT3SAS_FMT "\tbreak from volume scan: " \ "ioc_status(0x%04x), loginfo(0x%08x)\n", @@ -6914,8 +6923,6 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) handle))) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; - if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) - break; if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { pr_info(MPT3SAS_FMT "\tbreak from end device scan:"\ " ioc_status(0x%04x), loginfo(0x%08x)\n", @@ -7525,10 +7532,12 @@ _scsih_probe_boot_devices(struct MPT3SAS_ADAPTER *ioc) sas_address_parent)) { _scsih_sas_device_remove(ioc, sas_device); } else if (!sas_device->starget) { - if (!ioc->is_driver_loading) - mpt3sas_transport_port_remove(ioc, sas_address, + if (!ioc->is_driver_loading) { + mpt3sas_transport_port_remove(ioc, + sas_address, sas_address_parent); - _scsih_sas_device_remove(ioc, sas_device); + _scsih_sas_device_remove(ioc, sas_device); + } } } } @@ -7584,13 +7593,14 @@ _scsih_probe_sas(struct MPT3SAS_ADAPTER *ioc) * oops in scsi_sysfs_add_sdev()->add_device()-> * sysfs_addrm_start() */ - if (!ioc->is_driver_loading) + if (!ioc->is_driver_loading) { mpt3sas_transport_port_remove(ioc, sas_device->sas_address, sas_device->sas_address_parent); - list_del(&sas_device->list); - kfree(sas_device); - continue; + list_del(&sas_device->list); + kfree(sas_device); + continue; + } } spin_lock_irqsave(&ioc->sas_device_lock, flags); diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c index 87ca2b7..dcadd56 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_transport.c +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c @@ -2,7 +2,7 @@ * SAS Transport Layer for MPT (Message Passing Technology) based controllers * * This code is based on drivers/scsi/mpt3sas/mpt3sas_transport.c - * Copyright (C) 2012 LSI Corporation + * Copyright (C) 2012-2013 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or diff --git a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c index 6f8d621..f6533ab 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c +++ b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c @@ -3,7 +3,7 @@ * (Message Passing Technology) based controllers * * This code is based on drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c - * Copyright (C) 2012 LSI Corporation + * Copyright (C) 2012-2013 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or diff --git a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h index a10c309..bb69392 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h +++ b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h @@ -4,7 +4,7 @@ * controllers * * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h - * Copyright (C) 2012 LSI Corporation + * Copyright (C) 2012-2013 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or |