diff options
Diffstat (limited to 'drivers/scsi/qla2xxx')
-rw-r--r-- | drivers/scsi/qla2xxx/qla_def.h | 2 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_gbl.h | 1 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_gs.c | 24 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_init.c | 76 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_isr.c | 15 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_mbx.c | 12 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_os.c | 59 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_version.h | 2 |
8 files changed, 107 insertions, 84 deletions
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index c4fc40f..2c10130 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -1602,6 +1602,7 @@ typedef struct fc_port { #define CT_REJECT_RESPONSE 0x8001 #define CT_ACCEPT_RESPONSE 0x8002 +#define CT_REASON_INVALID_COMMAND_CODE 0x01 #define CT_REASON_CANNOT_PERFORM 0x09 #define CT_EXPL_ALREADY_REGISTERED 0x10 @@ -2079,6 +2080,7 @@ typedef struct scsi_qla_host { uint32_t msi_enabled :1; uint32_t msix_enabled :1; uint32_t disable_serdes :1; + uint32_t gpsc_supported :1; } flags; atomic_t loop_state; diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 32ebeec..e4dd12f 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -45,7 +45,6 @@ extern void qla2x00_update_fcports(scsi_qla_host_t *); extern int qla2x00_abort_isp(scsi_qla_host_t *); extern void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *); -extern void qla2x00_reg_remote_port(scsi_qla_host_t *, fc_port_t *); extern void qla2x00_alloc_fw_dump(scsi_qla_host_t *); extern void qla2x00_try_to_stop_firmware(scsi_qla_host_t *); diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index 97fbc62..ec5b2dd 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -127,8 +127,8 @@ qla2x00_chk_ms_status(scsi_qla_host_t *ha, ms_iocb_entry_t *ms_pkt, ha->host_no, routine, ms_pkt->entry_status)); } else { if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) - comp_status = - ((struct ct_entry_24xx *)ms_pkt)->comp_status; + comp_status = le16_to_cpu( + ((struct ct_entry_24xx *)ms_pkt)->comp_status); else comp_status = le16_to_cpu(ms_pkt->status); switch (comp_status) { @@ -143,6 +143,7 @@ qla2x00_chk_ms_status(scsi_qla_host_t *ha, ms_iocb_entry_t *ms_pkt, DEBUG2_3(qla2x00_dump_buffer( (uint8_t *)&ct_rsp->header, sizeof(struct ct_rsp_hdr))); + rval = QLA_INVALID_COMMAND; } else rval = QLA_SUCCESS; break; @@ -1683,7 +1684,7 @@ qla2x00_gfpn_id(scsi_qla_host_t *ha, sw_info_t *list) memset(list[i].fabric_port_name, 0, WWN_SIZE); /* Prepare common MS IOCB */ - ms_pkt = qla2x00_prep_ms_iocb(ha, GFPN_ID_REQ_SIZE, + ms_pkt = ha->isp_ops.prep_ms_iocb(ha, GFPN_ID_REQ_SIZE, GFPN_ID_RSP_SIZE); /* Prepare CT request */ @@ -1784,6 +1785,8 @@ qla2x00_gpsc(scsi_qla_host_t *ha, sw_info_t *list) if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha)) return QLA_FUNCTION_FAILED; + if (!ha->flags.gpsc_supported) + return QLA_FUNCTION_FAILED; rval = qla2x00_mgmt_svr_login(ha); if (rval) @@ -1813,8 +1816,19 @@ qla2x00_gpsc(scsi_qla_host_t *ha, sw_info_t *list) /*EMPTY*/ DEBUG2_3(printk("scsi(%ld): GPSC issue IOCB " "failed (%d).\n", ha->host_no, rval)); - } else if (qla2x00_chk_ms_status(ha, ms_pkt, ct_rsp, - "GPSC") != QLA_SUCCESS) { + } else if ((rval = qla2x00_chk_ms_status(ha, ms_pkt, ct_rsp, + "GPSC")) != QLA_SUCCESS) { + /* FM command unsupported? */ + if (rval == QLA_INVALID_COMMAND && + ct_rsp->header.reason_code == + CT_REASON_INVALID_COMMAND_CODE) { + DEBUG2(printk("scsi(%ld): GPSC command " + "unsupported, disabling query...\n", + ha->host_no)); + ha->flags.gpsc_supported = 0; + rval = QLA_FUNCTION_FAILED; + break; + } rval = QLA_FUNCTION_FAILED; } else { /* Save portname */ diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index a823f0b..b3dac26 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -2103,40 +2103,7 @@ qla2x00_iidma_fcport(scsi_qla_host_t *ha, fc_port_t *fcport) } } -/* - * qla2x00_update_fcport - * Updates device on list. - * - * Input: - * ha = adapter block pointer. - * fcport = port structure pointer. - * - * Return: - * 0 - Success - * BIT_0 - error - * - * Context: - * Kernel context. - */ -void -qla2x00_update_fcport(scsi_qla_host_t *ha, fc_port_t *fcport) -{ - fcport->ha = ha; - fcport->login_retry = 0; - fcport->port_login_retry_count = ha->port_down_retry_count * - PORT_RETRY_TIME; - atomic_set(&fcport->port_down_timer, ha->port_down_retry_count * - PORT_RETRY_TIME); - fcport->flags &= ~FCF_LOGIN_NEEDED; - - qla2x00_iidma_fcport(ha, fcport); - - atomic_set(&fcport->state, FCS_ONLINE); - - qla2x00_reg_remote_port(ha, fcport); -} - -void +static void qla2x00_reg_remote_port(scsi_qla_host_t *ha, fc_port_t *fcport) { struct fc_rport_identifiers rport_ids; @@ -2179,6 +2146,39 @@ qla2x00_reg_remote_port(scsi_qla_host_t *ha, fc_port_t *fcport) } /* + * qla2x00_update_fcport + * Updates device on list. + * + * Input: + * ha = adapter block pointer. + * fcport = port structure pointer. + * + * Return: + * 0 - Success + * BIT_0 - error + * + * Context: + * Kernel context. + */ +void +qla2x00_update_fcport(scsi_qla_host_t *ha, fc_port_t *fcport) +{ + fcport->ha = ha; + fcport->login_retry = 0; + fcport->port_login_retry_count = ha->port_down_retry_count * + PORT_RETRY_TIME; + atomic_set(&fcport->port_down_timer, ha->port_down_retry_count * + PORT_RETRY_TIME); + fcport->flags &= ~FCF_LOGIN_NEEDED; + + qla2x00_iidma_fcport(ha, fcport); + + atomic_set(&fcport->state, FCS_ONLINE); + + qla2x00_reg_remote_port(ha, fcport); +} + +/* * qla2x00_configure_fabric * Setup SNS devices with loop ID's. * @@ -3476,9 +3476,11 @@ qla24xx_nvram_config(scsi_qla_host_t *ha) /* Set host adapter parameters. */ ha->flags.disable_risc_code_load = 0; - ha->flags.enable_lip_reset = 1; - ha->flags.enable_lip_full_login = 1; - ha->flags.enable_target_reset = 1; + ha->flags.enable_lip_reset = 0; + ha->flags.enable_lip_full_login = + le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0; + ha->flags.enable_target_reset = + le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0; ha->flags.enable_led_scheme = 0; ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0; diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index d3b6df4..39fd17b 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -134,11 +134,11 @@ qla2300_intr_handler(int irq, void *dev_id) if (stat & HSR_RISC_PAUSED) { hccr = RD_REG_WORD(®->hccr); if (hccr & (BIT_15 | BIT_13 | BIT_11 | BIT_8)) - qla_printk(KERN_INFO, ha, - "Parity error -- HCCR=%x.\n", hccr); + qla_printk(KERN_INFO, ha, "Parity error -- " + "HCCR=%x, Dumping firmware!\n", hccr); else - qla_printk(KERN_INFO, ha, - "RISC paused -- HCCR=%x.\n", hccr); + qla_printk(KERN_INFO, ha, "RISC paused -- " + "HCCR=%x, Dumping firmware!\n", hccr); /* * Issue a "HARD" reset in order for the RISC @@ -147,6 +147,8 @@ qla2300_intr_handler(int irq, void *dev_id) */ WRT_REG_WORD(®->hccr, HCCR_RESET_RISC); RD_REG_WORD(®->hccr); + + ha->isp_ops.fw_dump(ha, 1); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); break; } else if ((stat & HSR_RISC_INT) == 0) @@ -475,6 +477,8 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) set_bit(RESET_MARKER_NEEDED, &ha->dpc_flags); } set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags); + + ha->flags.gpsc_supported = 1; break; case MBA_CHG_IN_CONNECTION: /* Change in connection mode */ @@ -1440,8 +1444,7 @@ qla24xx_intr_handler(int irq, void *dev_id) qla_printk(KERN_INFO, ha, "RISC paused -- HCCR=%x, " "Dumping firmware!\n", hccr); - qla24xx_fw_dump(ha, 1); - + ha->isp_ops.fw_dump(ha, 1); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); break; } else if ((stat & HSRX_RISC_INT) == 0) diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 4cde76c..077e578 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -1339,9 +1339,9 @@ qla2x00_lip_reset(scsi_qla_host_t *ha) if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) { mcp->mb[0] = MBC_LIP_FULL_LOGIN; - mcp->mb[1] = BIT_0; - mcp->mb[2] = 0xff; - mcp->mb[3] = 0; + mcp->mb[1] = BIT_6; + mcp->mb[2] = 0; + mcp->mb[3] = ha->loop_reset_delay; mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0; } else { mcp->mb[0] = MBC_LIP_RESET; @@ -1823,8 +1823,8 @@ qla2x00_full_login_lip(scsi_qla_host_t *ha) ha->host_no)); mcp->mb[0] = MBC_LIP_FULL_LOGIN; - mcp->mb[1] = 0; - mcp->mb[2] = 0xff; + mcp->mb[1] = IS_QLA24XX(ha) || IS_QLA54XX(ha) ? BIT_3: 0; + mcp->mb[2] = 0; mcp->mb[3] = 0; mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0; mcp->in_mb = MBX_0; @@ -2486,7 +2486,7 @@ qla2x00_trace_control(scsi_qla_host_t *ha, uint16_t ctrl, dma_addr_t eft_dma, mcp->mb[4] = LSW(MSD(eft_dma)); mcp->mb[5] = MSW(MSD(eft_dma)); mcp->mb[6] = buffers; - mcp->mb[7] = buffers; + mcp->mb[7] = 0; mcp->out_mb |= MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2; } mcp->tov = 30; diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index d03523d..d6445ae 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1037,48 +1037,49 @@ eh_host_reset_lock: static int qla2x00_loop_reset(scsi_qla_host_t *ha) { - int status = QLA_SUCCESS; + int ret; struct fc_port *fcport; + if (ha->flags.enable_lip_full_login) { + ret = qla2x00_full_login_lip(ha); + if (ret != QLA_SUCCESS) { + DEBUG2_3(printk("%s(%ld): bus_reset failed: " + "full_login_lip=%d.\n", __func__, ha->host_no, + ret)); + } + atomic_set(&ha->loop_state, LOOP_DOWN); + atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME); + qla2x00_mark_all_devices_lost(ha, 0); + qla2x00_wait_for_loop_ready(ha); + } + if (ha->flags.enable_lip_reset) { - status = qla2x00_lip_reset(ha); + ret = qla2x00_lip_reset(ha); + if (ret != QLA_SUCCESS) { + DEBUG2_3(printk("%s(%ld): bus_reset failed: " + "lip_reset=%d.\n", __func__, ha->host_no, ret)); + } + qla2x00_wait_for_loop_ready(ha); } - if (status == QLA_SUCCESS && ha->flags.enable_target_reset) { + if (ha->flags.enable_target_reset) { list_for_each_entry(fcport, &ha->fcports, list) { if (fcport->port_type != FCT_TARGET) continue; - status = qla2x00_device_reset(ha, fcport); - if (status != QLA_SUCCESS) - break; + ret = qla2x00_device_reset(ha, fcport); + if (ret != QLA_SUCCESS) { + DEBUG2_3(printk("%s(%ld): bus_reset failed: " + "target_reset=%d d_id=%x.\n", __func__, + ha->host_no, ret, fcport->d_id.b24)); + } } } - if (status == QLA_SUCCESS && - ((!ha->flags.enable_target_reset && - !ha->flags.enable_lip_reset) || - ha->flags.enable_lip_full_login)) { - - status = qla2x00_full_login_lip(ha); - } - /* Issue marker command only when we are going to start the I/O */ ha->marker_needed = 1; - if (status) { - /* Empty */ - DEBUG2_3(printk("%s(%ld): **** FAILED ****\n", - __func__, - ha->host_no)); - } else { - /* Empty */ - DEBUG3(printk("%s(%ld): exiting normally.\n", - __func__, - ha->host_no)); - } - - return(status); + return QLA_SUCCESS; } /* @@ -1413,7 +1414,9 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) sht = &qla2x00_driver_template; if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 || - pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432) + pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432 || + pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5422 || + pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5432) sht = &qla24xx_driver_template; host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t)); if (host == NULL) { diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 1fa0bce..459e0d6 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.01.07-k3" +#define QLA2XXX_VERSION "8.01.07-k4" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 1 |