diff options
Diffstat (limited to 'drivers/staging/csr/csr_wifi_hip_card_sdio_intr.c')
-rw-r--r-- | drivers/staging/csr/csr_wifi_hip_card_sdio_intr.c | 2595 |
1 files changed, 0 insertions, 2595 deletions
diff --git a/drivers/staging/csr/csr_wifi_hip_card_sdio_intr.c b/drivers/staging/csr/csr_wifi_hip_card_sdio_intr.c deleted file mode 100644 index cfe186e..0000000 --- a/drivers/staging/csr/csr_wifi_hip_card_sdio_intr.c +++ /dev/null @@ -1,2595 +0,0 @@ -/***************************************************************************** - - (c) Cambridge Silicon Radio Limited 2012 - All rights reserved and confidential information of CSR - - Refer to LICENSE.txt included with this source for details - on the license terms. - -*****************************************************************************/ - -/* - * --------------------------------------------------------------------------- - * FILE: csr_wifi_hip_card_sdio_intr.c - * - * PURPOSE: - * Interrupt processing for the UniFi SDIO driver. - * - * We may need another signal queue of responses to UniFi to hold - * bulk data commands generated by read_to_host_signals(). - * - * --------------------------------------------------------------------------- - */ -#undef CSR_WIFI_HIP_NOISY - -#include "csr_wifi_hip_unifi.h" -#include "csr_wifi_hip_conversions.h" -#include "csr_wifi_hip_card.h" -#include "csr_wifi_hip_xbv.h" - - -/* - * If the SDIO link is idle for this time (in milliseconds), - * signal UniFi to go into Deep Sleep. - * Valid return value of unifi_bh(). - */ -#define UNIFI_DEFAULT_HOST_IDLE_TIMEOUT 5 -/* - * If the UniFi has not woken up for this time (in milliseconds), - * signal the bottom half to take action. - * Valid return value of unifi_bh(). - */ -#define UNIFI_DEFAULT_WAKE_TIMEOUT 1000 - - -static CsrResult process_bh(card_t *card); -static CsrResult handle_host_protocol(card_t *card, u8 *processed_something); - -static CsrResult flush_fh_buffer(card_t *card); - -static CsrResult check_fh_sig_slots(card_t *card, u16 needed, s32 *space); - -static CsrResult read_to_host_signals(card_t *card, s32 *processed); -static CsrResult process_to_host_signals(card_t *card, s32 *processed); - -static CsrResult process_bulk_data_command(card_t *card, - const u8 *cmdptr, - s16 cmd, u16 len); -static CsrResult process_clear_slot_command(card_t *card, - const u8 *cmdptr); -static CsrResult process_fh_cmd_queue(card_t *card, s32 *processed); -static CsrResult process_fh_traffic_queue(card_t *card, s32 *processed); -static void restart_packet_flow(card_t *card); -static CsrResult process_clock_request(card_t *card); - -#ifdef CSR_WIFI_HIP_NOISY -s16 dump_fh_buf = 0; -#endif /* CSR_WIFI_HIP_NOISY */ - -#ifdef CSR_WIFI_HIP_DEBUG_OFFLINE - -/* - * The unifi_debug_output buffer can be used to debug the HIP behaviour offline - * i.e. without using the tracing functions that change the timing. - * - * Call unifi_debug_log_to_buf() with printf arguments to store a string into - * unifi_debug_output. When unifi_debug_buf_dump() is called, the contents of the - * buffer are dumped with dump_str() which has to be implemented in the - * OS layer, during the porting exercise. The offset printed, holds the - * offset where the last character is (always a zero). - * - */ - -#define UNIFI_DEBUG_GBUFFER_SIZE 8192 -static char unifi_debug_output[UNIFI_DEBUG_GBUFFER_SIZE]; -static char *unifi_dbgbuf_ptr = unifi_debug_output; -static char *unifi_dbgbuf_start = unifi_debug_output; - -static void append_char(char c) -{ - /* write char and advance pointer */ - *unifi_dbgbuf_ptr++ = c; - /* wrap pointer at end of buffer */ - if ((unifi_dbgbuf_ptr - unifi_debug_output) >= UNIFI_DEBUG_GBUFFER_SIZE) - { - unifi_dbgbuf_ptr = unifi_debug_output; - } -} /* append_char() */ - - -void unifi_debug_string_to_buf(const char *str) -{ - const char *p = str; - while (*p) - { - append_char(*p); - p++; - } - /* Update start-of-buffer pointer */ - unifi_dbgbuf_start = unifi_dbgbuf_ptr + 1; - if ((unifi_dbgbuf_start - unifi_debug_output) >= UNIFI_DEBUG_GBUFFER_SIZE) - { - unifi_dbgbuf_start = unifi_debug_output; - } -} - - -void unifi_debug_log_to_buf(const char *fmt, ...) -{ -#define DEBUG_BUFFER_SIZE 80 - static char s[DEBUG_BUFFER_SIZE]; - va_list args; - - va_start(args, fmt); - vsnprintf(s, DEBUG_BUFFER_SIZE, fmt, args); - va_end(args); - - unifi_debug_string_to_buf(s); -} /* unifi_debug_log_to_buf() */ - - -/* Convert signed 32 bit (or less) integer to string */ -static void CsrUInt16ToHex(u16 number, char *str) -{ - u16 index; - u16 currentValue; - - for (index = 0; index < 4; index++) - { - currentValue = (u16) (number & 0x000F); - number >>= 4; - str[3 - index] = (char) (currentValue > 9 ? currentValue + 55 : currentValue + '0'); - } - str[4] = '\0'; -} - - -/* - * --------------------------------------------------------------------------- - * unifi_debug_hex_to_buf - * - * puts the contents of the passed buffer into the debug buffer as a hex string - * - * Arguments: - * buff buffer to print as hex - * length number of chars to print - * - * Returns: - * None. - * - * --------------------------------------------------------------------------- - */ -void unifi_debug_hex_to_buf(const char *buff, u16 length) -{ - char s[5]; - u16 i; - - for (i = 0; i < length; i = i + 2) - { - CsrUInt16ToHex(*((u16 *)(buff + i)), s); - unifi_debug_string_to_buf(s); - } -} - - -void unifi_debug_buf_dump(void) -{ - s32 offset = unifi_dbgbuf_ptr - unifi_debug_output; - - unifi_error(NULL, "HIP debug buffer offset=%d\n", offset); - dump_str(unifi_debug_output + offset, UNIFI_DEBUG_GBUFFER_SIZE - offset); - dump_str(unifi_debug_output, offset); -} /* unifi_debug_buf_dump() */ - - -#endif /* CSR_WIFI_HIP_DEBUG_OFFLINE */ - -#ifdef CSR_PRE_ALLOC_NET_DATA -#define NETDATA_PRE_ALLOC_BUF_SIZE 8000 - -void prealloc_netdata_free(card_t *card) -{ - unifi_warning(card->ospriv, "prealloc_netdata_free: IN: w=%d r=%d\n", card->prealloc_netdata_w, card->prealloc_netdata_r); - - while (card->bulk_data_desc_list[card->prealloc_netdata_r].data_length != 0) - { - unifi_warning(card->ospriv, "prealloc_netdata_free: r=%d\n", card->prealloc_netdata_r); - - unifi_net_data_free(card->ospriv, &card->bulk_data_desc_list[card->prealloc_netdata_r]); - card->prealloc_netdata_r++; - card->prealloc_netdata_r %= BULK_DATA_PRE_ALLOC_NUM; - } - card->prealloc_netdata_r = card->prealloc_netdata_w = 0; - - unifi_warning(card->ospriv, "prealloc_netdata_free: OUT: w=%d r=%d\n", card->prealloc_netdata_w, card->prealloc_netdata_r); -} - - -CsrResult prealloc_netdata_alloc(card_t *card) -{ - CsrResult r; - - unifi_trace(card->ospriv, UDBG5, "prealloc_netdata_alloc: IN: w=%d r=%d\n", card->prealloc_netdata_w, card->prealloc_netdata_r); - - while (card->bulk_data_desc_list[card->prealloc_netdata_w].data_length == 0) - { - r = unifi_net_data_malloc(card->ospriv, &card->bulk_data_desc_list[card->prealloc_netdata_w], NETDATA_PRE_ALLOC_BUF_SIZE); - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, "prealloc_netdata_alloc: Failed to allocate t-h bulk data\n"); - return CSR_RESULT_FAILURE; - } - card->prealloc_netdata_w++; - card->prealloc_netdata_w %= BULK_DATA_PRE_ALLOC_NUM; - } - unifi_trace(card->ospriv, UDBG5, "prealloc_netdata_alloc: OUT: w=%d r=%d\n", card->prealloc_netdata_w, card->prealloc_netdata_r); - - return CSR_RESULT_SUCCESS; -} - - -static CsrResult prealloc_netdata_get(card_t *card, bulk_data_desc_t *bulk_data_slot, u32 size) -{ - CsrResult r; - - unifi_trace(card->ospriv, UDBG5, "prealloc_netdata_get: IN: w=%d r=%d\n", card->prealloc_netdata_w, card->prealloc_netdata_r); - - if (card->bulk_data_desc_list[card->prealloc_netdata_r].data_length == 0) - { - unifi_error(card->ospriv, "prealloc_netdata_get: data_length = 0\n"); - } - - if ((size > NETDATA_PRE_ALLOC_BUF_SIZE) || (card->bulk_data_desc_list[card->prealloc_netdata_r].data_length == 0)) - { - unifi_warning(card->ospriv, "prealloc_netdata_get: Calling net_data_malloc\n"); - - r = unifi_net_data_malloc(card->ospriv, bulk_data_slot, size); - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, "prealloc_netdata_get: Failed to allocate t-h bulk data\n"); - return CSR_RESULT_FAILURE; - } - return CSR_RESULT_SUCCESS; - } - - *bulk_data_slot = card->bulk_data_desc_list[card->prealloc_netdata_r]; - card->bulk_data_desc_list[card->prealloc_netdata_r].os_data_ptr = NULL; - card->bulk_data_desc_list[card->prealloc_netdata_r].os_net_buf_ptr = NULL; - card->bulk_data_desc_list[card->prealloc_netdata_r].net_buf_length = 0; - card->bulk_data_desc_list[card->prealloc_netdata_r].data_length = 0; - - card->prealloc_netdata_r++; - card->prealloc_netdata_r %= BULK_DATA_PRE_ALLOC_NUM; - - unifi_trace(card->ospriv, UDBG5, "prealloc_netdata_get: OUT: w=%d r=%d\n", card->prealloc_netdata_w, card->prealloc_netdata_r); - - return CSR_RESULT_SUCCESS; -} - - -#endif - -/* - * --------------------------------------------------------------------------- - * unifi_sdio_interrupt_handler - * - * This function should be called by the OS-dependent code to handle - * an SDIO interrupt from the UniFi. - * - * Arguments: - * card Pointer to card context structure. - * - * Returns: - * None. - * - * Notes: This function may be called in DRS context. In this case, - * tracing with the unifi_trace(), etc, is not allowed. - * --------------------------------------------------------------------------- - */ -void unifi_sdio_interrupt_handler(card_t *card) -{ - /* - * Set the flag to say reason for waking was SDIO interrupt. - * Then ask the OS layer to run the unifi_bh to give attention to the UniFi. - */ - card->bh_reason_unifi = 1; - (void)unifi_run_bh(card->ospriv); -} /* sdio_interrupt_handler() */ - - -/* - * --------------------------------------------------------------------------- - * unifi_configure_low_power_mode - * - * This function should be called by the OS-dependent when - * the deep sleep signaling needs to be enabled or disabled. - * - * Arguments: - * card Pointer to card context structure. - * low_power_mode Disable/Enable the deep sleep signaling - * periodic_wake_mode UniFi wakes host periodically. - * - * Returns: - * CSR_RESULT_SUCCESS on success or a CSR error code. - * --------------------------------------------------------------------------- - */ -CsrResult unifi_configure_low_power_mode(card_t *card, - enum unifi_low_power_mode low_power_mode, - enum unifi_periodic_wake_mode periodic_wake_mode) -{ - card->low_power_mode = low_power_mode; - card->periodic_wake_mode = periodic_wake_mode; - - unifi_trace(card->ospriv, UDBG1, - "unifi_configure_low_power_mode: new mode = %s, wake_host = %s\n", - (low_power_mode == UNIFI_LOW_POWER_DISABLED)?"disabled" : "enabled", - (periodic_wake_mode == UNIFI_PERIODIC_WAKE_HOST_DISABLED)?"FALSE" : "TRUE"); - - (void)unifi_run_bh(card->ospriv); - return CSR_RESULT_SUCCESS; -} /* unifi_configure_low_power_mode() */ - - -/* - * --------------------------------------------------------------------------- - * unifi_force_low_power_mode - * - * This function should be called by the OS-dependent when - * UniFi needs to be set to the low power mode (e.g. on suspend) - * - * Arguments: - * card Pointer to card context structure. - * - * Returns: - * CSR_RESULT_SUCCESS on success or a CSR error code. - * --------------------------------------------------------------------------- - */ -CsrResult unifi_force_low_power_mode(card_t *card) -{ - if (card->low_power_mode == UNIFI_LOW_POWER_DISABLED) - { - unifi_error(card->ospriv, "Attempt to set mode to TORPID when lower power mode is disabled\n"); - return CSR_WIFI_HIP_RESULT_INVALID_VALUE; - } - - return unifi_set_host_state(card, UNIFI_HOST_STATE_TORPID); -} /* unifi_force_low_power_mode() */ - - -/* - * --------------------------------------------------------------------------- - * unifi_bh - * - * This function should be called by the OS-dependent code when - * host and/or UniFi has requested an exchange of messages. - * - * Arguments: - * card Pointer to card context structure. - * - * Returns: - * CSR_RESULT_SUCCESS on success or a CSR error code. - * --------------------------------------------------------------------------- - */ -CsrResult unifi_bh(card_t *card, u32 *remaining) -{ - CsrResult r; - CsrResult csrResult; - u8 pending; - s32 iostate, j; - const enum unifi_low_power_mode low_power_mode = card->low_power_mode; - u16 data_slots_used = 0; - - - /* Process request to raise the maximum SDIO clock */ - r = process_clock_request(card); - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, "Error setting maximum SDIO clock\n"); - goto exit; - } - - /* - * Why was the BH thread woken? - * If it was an SDIO interrupt, UniFi is awake and we need to process it. - * If it was a host process queueing data, then we need to awaken UniFi. - * - * Priority of flags is top down. - * - * ----------------------------------------------------------+ - * \state| AWAKE | DROWSY | TORPID | - * flag\ | | | | - * ---------+--------------+----------------+----------------| - * | do the host | go to AWAKE and| go to AWAKE and| - * unifi | protocol | do the host | do the host | - * | | protocol | protocol | - * ---------+--------------+----------------+----------------| - * | do the host | | | - * host | protocol | do nothing | go to DROWSY | - * | | | | - * ---------+--------------+----------------+----------------| - * | | | should not | - * timeout | go to TORPID | error, unifi | occur | - * | | didn't wake up | do nothing | - * ----------------------------------------------------------+ - * - * Note that if we end up in the AWAKE state we always do the host protocol. - */ - - do - { - /* - * When the host state is set to DROWSY, then we can not disable the - * interrupts as UniFi can generate an interrupt even when the INT_ENABLE - * register has the interrupts disabled. This interrupt will be lost. - */ - if (card->host_state == UNIFI_HOST_STATE_DROWSY || card->host_state == UNIFI_HOST_STATE_TORPID) - { - u8 reason_unifi; - - /* - * An interrupt may occur while or after we cache the reason. - * This interrupt will cause the unifi_bh() to be scheduled again. - * Any interrupt that has happened before the register is read - * and is considered spurious has to acknowledged. - */ - reason_unifi = card->bh_reason_unifi; - - /* - * If an interrupt is received, check if it was a real one, - * set the host state to AWAKE and run the BH. - */ - r = CardPendingInt(card, &pending); - if (r != CSR_RESULT_SUCCESS) - { - goto exit; - } - - if (pending) - { - unifi_trace(card->ospriv, UDBG5, - "UNIFI_HOST_STATE_%s: Set state to AWAKE.\n", - (card->host_state == UNIFI_HOST_STATE_TORPID)?"TORPID" : "DROWSY"); - - r = unifi_set_host_state(card, UNIFI_HOST_STATE_AWAKE); - if (r == CSR_RESULT_SUCCESS) - { - (*remaining) = 0; - break; - } - } - else if (reason_unifi) - { - CsrSdioInterruptAcknowledge(card->sdio_if); - } - - /* - * If an chip is in TORPID, and the host wants to wake it up, - * set the host state to DROWSY and wait for the wake-up interrupt. - */ - if ((card->host_state == UNIFI_HOST_STATE_TORPID) && card->bh_reason_host) - { - r = unifi_set_host_state(card, UNIFI_HOST_STATE_DROWSY); - if (r == CSR_RESULT_SUCCESS) - { - /* - * set the timeout value to UNIFI_DEFAULT_WAKE_TIMEOUT - * to capture a wake error. - */ - card->bh_reason_host = 0; - (*remaining) = UNIFI_DEFAULT_WAKE_TIMEOUT; - return CSR_RESULT_SUCCESS; - } - - goto exit; - } - - /* - * If the chip is in DROWSY, and the timeout expires, - * we need to reset the chip. This should never occur. - * (If it does, check that the calling thread set "remaining" - * according to the time remaining when unifi_bh() was called). - */ - if ((card->host_state == UNIFI_HOST_STATE_DROWSY) && ((*remaining) == 0)) - { - unifi_error(card->ospriv, "UniFi did not wake up on time...\n"); - - /* - * Check if Function1 has gone away or - * if we missed an SDIO interrupt. - */ - r = unifi_check_io_status(card, &iostate); - if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE) - { - goto exit; - } - /* Need to reset and reboot */ - return CSR_RESULT_FAILURE; - } - } - else - { - if (card->bh_reason_unifi || card->bh_reason_host) - { - break; - } - - if (((*remaining) == 0) && (low_power_mode == UNIFI_LOW_POWER_ENABLED)) - { - r = unifi_set_host_state(card, UNIFI_HOST_STATE_TORPID); - if (r == CSR_RESULT_SUCCESS) - { - (*remaining) = 0; - return CSR_RESULT_SUCCESS; - } - - goto exit; - } - } - - /* No need to run the host protocol */ - return CSR_RESULT_SUCCESS; - } while (0); - - - /* Disable the SDIO interrupts while doing SDIO ops */ - csrResult = CsrSdioInterruptDisable(card->sdio_if); - if (csrResult == CSR_SDIO_RESULT_NO_DEVICE) - { - r = CSR_WIFI_HIP_RESULT_NO_DEVICE; - goto exit; - } - if (csrResult != CSR_RESULT_SUCCESS) - { - r = ConvertCsrSdioToCsrHipResult(card, csrResult); - unifi_error(card->ospriv, "Failed to disable SDIO interrupts. unifi_bh queues error.\n"); - goto exit; - } - - /* Now that the interrupts are disabled, ack the interrupt */ - CsrSdioInterruptAcknowledge(card->sdio_if); - - /* Run the HIP */ - r = process_bh(card); - if (r != CSR_RESULT_SUCCESS) - { - goto exit; - } - - /* - * If host is now idle, schedule a timer for the delay before we - * let UniFi go into deep sleep. - * If the timer goes off, we will move to TORPID state. - * If UniFi raises an interrupt in the meantime, we will cancel - * the timer and start a new one when we become idle. - */ - for (j = 0; j < UNIFI_NO_OF_TX_QS; j++) - { - data_slots_used += CSR_WIFI_HIP_Q_SLOTS_USED(&card->fh_traffic_queue[j]); - } - - if ((low_power_mode == UNIFI_LOW_POWER_ENABLED) && (data_slots_used == 0)) - { -#ifndef CSR_WIFI_HIP_TA_DISABLE - if (card->ta_sampling.traffic_type != CSR_WIFI_ROUTER_CTRL_TRAFFIC_TYPE_PERIODIC) - { -#endif - /* return the UNIFI_DEFAULT_HOST_IDLE_TIMEOUT, so we can go to sleep. */ - unifi_trace(card->ospriv, UDBG5, - "Traffic is not periodic, set timer for TORPID.\n"); - (*remaining) = UNIFI_DEFAULT_HOST_IDLE_TIMEOUT; -#ifndef CSR_WIFI_HIP_TA_DISABLE - } - else - { - unifi_trace(card->ospriv, UDBG5, - "Traffic is periodic, set unifi to TORPID immediately.\n"); - if (CardAreAllFromHostDataSlotsEmpty(card) == 1) - { - r = unifi_set_host_state(card, UNIFI_HOST_STATE_TORPID); - if (r != CSR_RESULT_SUCCESS) - { - goto exit; - } - } - } -#endif - } - - csrResult = CsrSdioInterruptEnable(card->sdio_if); - if (csrResult == CSR_SDIO_RESULT_NO_DEVICE) - { - r = CSR_WIFI_HIP_RESULT_NO_DEVICE; - } - if (csrResult != CSR_RESULT_SUCCESS) - { - r = ConvertCsrSdioToCsrHipResult(card, csrResult); - unifi_error(card->ospriv, "Failed to enable SDIO interrupt\n"); - } - -exit: - - unifi_trace(card->ospriv, UDBG4, "New state=%d\n", card->host_state); - - if (r != CSR_RESULT_SUCCESS) - { -#if defined (CSR_WIFI_HIP_DEBUG_OFFLINE) && defined (CSR_WIFI_HIP_SDIO_TRACE) - unifi_debug_buf_dump(); -#endif - /* If an interrupt has been raised, ack it here */ - if (card->bh_reason_unifi) - { - CsrSdioInterruptAcknowledge(card->sdio_if); - } - - unifi_error(card->ospriv, - "unifi_bh: state=%d %c, clock=%dkHz, interrupt=%d host=%d, power_save=%s\n", - card->host_state, - (card->host_state == UNIFI_HOST_STATE_AWAKE)?'A' : (card->host_state == UNIFI_HOST_STATE_DROWSY)?'D' : 'T', - card->sdio_clock_speed / 1000, - card->bh_reason_unifi, card->bh_reason_host, - (low_power_mode == UNIFI_LOW_POWER_DISABLED)?"disabled" : "enabled"); - - /* Try to capture firmware panic codes */ - (void)unifi_capture_panic(card); - - /* Ask for a mini-coredump when the driver has reset UniFi */ - (void)unifi_coredump_request_at_next_reset(card, 1); - } - - return r; -} /* unifi_bh() */ - - -/* - * --------------------------------------------------------------------------- - * process_clock_request - * - * Handle request from the OS layer to increase the SDIO clock speed. - * The fast clock is limited until the firmware has indicated that it has - * completed initialisation to the OS layer. - * - * Arguments: - * card Pointer to card context structure. - * - * Returns: - * CSR_RESULT_SUCCESS on success or CSR error code. - * --------------------------------------------------------------------------- - */ -static CsrResult process_clock_request(card_t *card) -{ - CsrResult r = CSR_RESULT_SUCCESS; - CsrResult csrResult; - - if (!card->request_max_clock) - { - return CSR_RESULT_SUCCESS; /* No pending request */ - } - - /* - * The SDIO clock speed request from the OS layer is only acted upon if - * the UniFi is awake. If it was in any other state, the clock speed will - * transition through SAFE to MAX while the host wakes it up, and the - * final speed reached will be UNIFI_SDIO_CLOCK_MAX_HZ. - * This assumes that the SME never requests low power mode while the f/w - * initialisation takes place. - */ - if (card->host_state == UNIFI_HOST_STATE_AWAKE) - { - unifi_trace(card->ospriv, UDBG1, "Set SDIO max clock\n"); - csrResult = CsrSdioMaxBusClockFrequencySet(card->sdio_if, UNIFI_SDIO_CLOCK_MAX_HZ); - if (csrResult != CSR_RESULT_SUCCESS) - { - r = ConvertCsrSdioToCsrHipResult(card, csrResult); - } - else - { - card->sdio_clock_speed = UNIFI_SDIO_CLOCK_MAX_HZ; /* log the new freq */ - } - } - else - { - unifi_trace(card->ospriv, UDBG1, "Will set SDIO max clock after wakeup\n"); - } - - /* Cancel the request now that it has been acted upon, or is about to be - * by the wakeup mechanism - */ - card->request_max_clock = 0; - - return r; -} - - -/* - * --------------------------------------------------------------------------- - * process_bh - * - * Exchange messages with UniFi - * - * Arguments: - * card Pointer to card context structure. - * - * Returns: - * CSR_RESULT_SUCCESS on success or CSR error code. - * --------------------------------------------------------------------------- - */ -static CsrResult process_bh(card_t *card) -{ - CsrResult r; - u8 more; - more = FALSE; - - /* Process the reasons (interrupt, signals) */ - do - { - /* - * Run in a while loop, to save clearing the interrupts - * every time around the outside loop. - */ - do - { - /* If configured to run the HIP just once, skip first loop */ - if (card->intmode & CSR_WIFI_INTMODE_RUN_BH_ONCE) - { - break; - } - - r = handle_host_protocol(card, &more); - if (r != CSR_RESULT_SUCCESS) - { - return r; - } - -#if defined (CSR_WIFI_HIP_DEBUG_OFFLINE) && defined (CSR_WIFI_HIP_DATA_PLANE_PROFILE) - unifi_debug_log_to_buf("c52=%d c53=%d tx=%d txc=%d rx=%d s=%d t=%d fc=%d\n", - card->cmd_prof.cmd52_count, - card->cmd_prof.cmd53_count, - card->cmd_prof.tx_count, - card->cmd_prof.tx_cfm_count, - card->cmd_prof.rx_count, - card->cmd_prof.sdio_cmd_signal, - card->cmd_prof.sdio_cmd_to_host, - card->cmd_prof.sdio_cmd_from_host_and_clear - ); - - card->cmd_prof.cmd52_count = card->cmd_prof.cmd53_count = 0; - card->cmd_prof.tx_count = card->cmd_prof.tx_cfm_count = card->cmd_prof.rx_count = 0; - - card->cmd_prof.cmd52_f0_r_count = 0; - card->cmd_prof.cmd52_f0_w_count = 0; - card->cmd_prof.cmd52_r8or16_count = 0; - card->cmd_prof.cmd52_w8or16_count = 0; - card->cmd_prof.cmd52_r16_count = 0; - card->cmd_prof.cmd52_w16_count = 0; - card->cmd_prof.cmd52_r32_count = 0; - - card->cmd_prof.sdio_cmd_signal = 0; - card->cmd_prof.sdio_cmd_clear_slot = 0; - card->cmd_prof.sdio_cmd_to_host = 0; - card->cmd_prof.sdio_cmd_from_host = 0; - card->cmd_prof.sdio_cmd_from_host_and_clear = 0; -#endif - - - } while (more || card->bh_reason_unifi || card->bh_reason_host); - - /* Acknowledge the h/w interrupt */ - r = CardClearInt(card); - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, "Failed to acknowledge interrupt.\n"); - return r; - } - - /* - * UniFi may have tried to generate an interrupt during the - * CardClearInt() was running. So, we need to run the host - * protocol again, to check if there are any pending requests. - */ - r = handle_host_protocol(card, &more); - if (r != CSR_RESULT_SUCCESS) - { - return r; - } - -#if defined (CSR_WIFI_HIP_DEBUG_OFFLINE) && defined (CSR_WIFI_HIP_DATA_PLANE_PROFILE) - unifi_debug_log_to_buf("c52=%d c53=%d tx=%d txc=%d rx=%d s=%d t=%d fc=%d\n", - card->cmd_prof.cmd52_count, - card->cmd_prof.cmd53_count, - card->cmd_prof.tx_count, - card->cmd_prof.tx_cfm_count, - card->cmd_prof.rx_count, - card->cmd_prof.sdio_cmd_signal, - card->cmd_prof.sdio_cmd_to_host, - card->cmd_prof.sdio_cmd_from_host_and_clear - ); - - card->cmd_prof.cmd52_count = card->cmd_prof.cmd53_count = 0; - card->cmd_prof.tx_count = card->cmd_prof.tx_cfm_count = card->cmd_prof.rx_count = 0; - - card->cmd_prof.cmd52_f0_r_count = 0; - card->cmd_prof.cmd52_f0_w_count = 0; - card->cmd_prof.cmd52_r8or16_count = 0; - card->cmd_prof.cmd52_w8or16_count = 0; - card->cmd_prof.cmd52_r16_count = 0; - card->cmd_prof.cmd52_w16_count = 0; - card->cmd_prof.cmd52_r32_count = 0; - - card->cmd_prof.sdio_cmd_signal = 0; - card->cmd_prof.sdio_cmd_clear_slot = 0; - card->cmd_prof.sdio_cmd_to_host = 0; - card->cmd_prof.sdio_cmd_from_host = 0; - card->cmd_prof.sdio_cmd_from_host_and_clear = 0; -#endif - /* If configured to run the HIP just once, work is now done */ - if (card->intmode & CSR_WIFI_INTMODE_RUN_BH_ONCE) - { - break; - } - - } while (more || card->bh_reason_unifi || card->bh_reason_host); - -#if defined (CSR_WIFI_HIP_DEBUG_OFFLINE) && defined (CSR_WIFI_HIP_DATA_PLANE_PROFILE) - if ((card->intmode & CSR_WIFI_INTMODE_RUN_BH_ONCE) == 0) - { - unifi_debug_log_to_buf("proc=%d\n", - card->cmd_prof.process_count); - } -#endif - - return CSR_RESULT_SUCCESS; -} /* process_bh() */ - - -/* - * --------------------------------------------------------------------------- - * handle_host_protocol - * - * This function implements the Host Interface Protocol (HIP) as - * described in the Host Interface Protocol Specification. - * - * Arguments: - * card Pointer to card context structure. - * processed_something Pointer to location to update processing status: - * TRUE when data was transferred - * FALSE when no data was transferred (queues empty) - * - * Returns: - * CSR_RESULT_SUCCESS on success or CSR error code. - * --------------------------------------------------------------------------- - */ -static CsrResult handle_host_protocol(card_t *card, u8 *processed_something) -{ - CsrResult r; - s32 done; - - *processed_something = FALSE; - -#ifdef CSR_WIFI_HIP_NOISY - unifi_error(card->ospriv, " ======================== \n"); -#endif /* CSR_WIFI_HIP_NOISY */ - -#ifdef CSR_WIFI_HIP_DATA_PLANE_PROFILE - card->cmd_prof.process_count++; -#endif - - card->bh_reason_unifi = card->bh_reason_host = 0; - card->generate_interrupt = 0; - - - /* - * (Re)fill the T-H signal buffer - */ - r = read_to_host_signals(card, &done); - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, "Error occurred reading to-host signals\n"); - return r; - } - if (done > 0) - { - *processed_something = TRUE; - } - - /* - * Process any to-host signals. - * Perform any requested CMD53 transfers here, but just queue any - * bulk data command responses. - */ - r = process_to_host_signals(card, &done); - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, "Error occurred processing to-host signals\n"); - return r; - } - - /* Now send any signals in the F-H queues */ - /* Give precedence to the command queue */ - r = process_fh_cmd_queue(card, &done); - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, "Error occurred processing from-host signals\n"); - return r; - } - if (done > 0) - { - *processed_something = TRUE; - } - - r = process_fh_traffic_queue(card, &done); - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, "Error occurred processing from-host data signals\n"); - return r; - } - if (done > 0) - { - *processed_something = TRUE; - } - - /* Flush out the batch of signals to the UniFi. */ - r = flush_fh_buffer(card); - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, "Failed to copy from-host signals to UniFi\n"); - return r; - } - - - /* - * Send the host interrupt to say the queues have been modified. - */ - if (card->generate_interrupt) - { - r = CardGenInt(card); - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, "Failed to notify UniFi that queues have been modified.\n"); - return r; - } - } - -#ifdef CSR_WIFI_RX_PATH_SPLIT -#ifdef CSR_WIFI_RX_PATH_SPLIT_DONT_USE_WQ - unifi_rx_queue_flush(card->ospriv); -#endif -#endif - - /* See if we can re-enable transmission now */ - restart_packet_flow(card); - -#ifdef CSR_PRE_ALLOC_NET_DATA - r = prealloc_netdata_alloc(card); - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, "prealloc_netdata failed\n"); - return r; - } -#endif - - /* - * Don't put the thread sleep if we just interacted with the chip, - * there might be more to do if we look again. - */ - return r; -} /* handle_host_protocol() */ - - -/* - * Rounds the given signal length in bytes to a whole number - * of sig_frag_size. - */ -#define GET_CHUNKS_FOR(SIG_FRAG_SIZE, LENGTH) (((LENGTH) + ((SIG_FRAG_SIZE)-1)) / (SIG_FRAG_SIZE)) - - -/* - * --------------------------------------------------------------------------- - * read_to_host_signals - * - * Read everything pending in the UniFi TH signal buffer. - * Only do it if the local buffer is empty. - * - * Arguments: - * card Pointer to card context struct - * processed Number of signals read: - * 0 if there were no signals pending, - * 1 if we read at least one signal - * Returns: - * CSR error code if an error occurred. - * --------------------------------------------------------------------------- - */ -static CsrResult read_to_host_signals(card_t *card, s32 *processed) -{ - s32 count_thw, count_thr; - s32 unread_chunks, unread_bytes; - CsrResult r; - - *processed = 0; - - /* Read any pending signals or bulk data commands */ - count_thw = unifi_read_shared_count(card, card->sdio_ctrl_addr + 4); - if (count_thw < 0) - { - unifi_error(card->ospriv, "Failed to read to-host sig written count\n"); - return CSR_RESULT_FAILURE; - } - card->to_host_signals_w = count_thw; /* diag */ - - count_thr = card->to_host_signals_r; - - if (count_thw == count_thr) - { - return CSR_RESULT_SUCCESS; - } - - unread_chunks = - (((count_thw - count_thr) + 128) % 128) - card->th_buffer.count; - - if (unread_chunks == 0) - { - return CSR_RESULT_SUCCESS; - } - - unread_bytes = card->config_data.sig_frag_size * unread_chunks; - - - r = unifi_bulk_rw(card, - card->config_data.tohost_sigbuf_handle, - card->th_buffer.ptr, - unread_bytes, - UNIFI_SDIO_READ); - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, "Failed to read ToHost signal\n"); - return r; - } - - card->th_buffer.ptr += unread_bytes; - card->th_buffer.count += (u16)unread_chunks; - - *processed = 1; - - return CSR_RESULT_SUCCESS; -} /* read_to_host_signals() */ - - -/* - * --------------------------------------------------------------------------- - * update_to_host_signals_r - * - * Advance the shared-memory count of chunks read from the to-host - * signal buffer. - * Raise a UniFi internal interrupt to tell the firmware that the - * count has changed. - * - * Arguments: - * card Pointer to card context struct - * pending Number of chunks remaining - * - * Returns: - * CSR_RESULT_SUCCESS on success or CSR error code - * --------------------------------------------------------------------------- - */ -static CsrResult update_to_host_signals_r(card_t *card, s16 pending) -{ - CsrResult r; - - card->to_host_signals_r = - (card->to_host_signals_r + (card->th_buffer.count - pending)) % 128; - card->th_buffer.count = pending; - - /* Update the count of signals read */ - r = unifi_write_8_or_16(card, card->sdio_ctrl_addr + 6, - (u8)card->to_host_signals_r); - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, "Failed to update to-host signals read\n"); - return r; - } - - r = CardGenInt(card); - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, "Failed to notify UniFi that we processed to-host signals.\n"); - return r; - } - - card->generate_interrupt = 0; - - return CSR_RESULT_SUCCESS; -} /* update_to_host_signals_r() */ - - -/* - * --------------------------------------------------------------------------- - * read_unpack_cmd - * - * Converts a wire-formatted command to the host bulk_data_cmd_t structure. - * - * Arguments: - * ptr Pointer to the command - * bulk_data_cmd Pointer to the host structure - * - * Returns: - * None. - * --------------------------------------------------------------------------- - */ -static void read_unpack_cmd(const u8 *ptr, bulk_data_cmd_t *bulk_data_cmd) -{ - s16 index = 0; - bulk_data_cmd->cmd_and_len = CSR_GET_UINT16_FROM_LITTLE_ENDIAN(ptr + index); - index += SIZEOF_UINT16; - bulk_data_cmd->data_slot = CSR_GET_UINT16_FROM_LITTLE_ENDIAN(ptr + index); - index += SIZEOF_UINT16; - bulk_data_cmd->offset = CSR_GET_UINT16_FROM_LITTLE_ENDIAN(ptr + index); - index += SIZEOF_UINT16; - bulk_data_cmd->buffer_handle = CSR_GET_UINT16_FROM_LITTLE_ENDIAN(ptr + index); - index += SIZEOF_UINT16; -} /* read_unpack_cmd */ - - -/* - * --------------------------------------------------------------------------- - * process_to_host_signals - * - * Read and dispatch signals from the UniFi - * - * Arguments: - * card Pointer to card context struct - * processed Pointer to location to write processing result: - * 0 if there were no signals pending, - * 1 if we read at least one signal - * - * Returns: - * CSR error code if there was an error - * - * Notes: - * Since bulk data transfers can take a long time, if we wait until - * all are done before we acknowledge the signals, the UniFi runs out - * of buffer space. Therefore we keep a count of the bytes transferred - * in bulk data commands, and update the to-host-signals-read count - * if we've done a large transfer. - * - * All data in the f/w is stored in a little endian format, without any - * padding bytes. Every read from the memory has to be transformed in - * host (cpu specific) format, before we can process it. Therefore we - * use read_unpack_cmd() and read_unpack_signal() to convert the raw data - * contained in the card->th_buffer.buf to host structures. - * Important: UDI clients use wire-formatted structures, so we need to - * indicate all data, as we have read it from the device. - * --------------------------------------------------------------------------- - */ -static CsrResult process_to_host_signals(card_t *card, s32 *processed) -{ - s16 pending; - s16 remaining; - u8 *bufptr; - bulk_data_param_t data_ptrs; - s16 cmd; - u16 sig_len; - s16 i; - u16 chunks_in_buf; - u16 bytes_transferred = 0; - CsrResult r = CSR_RESULT_SUCCESS; - - *processed = 0; - - pending = card->th_buffer.count; - - /* Are there new to-host signals? */ - unifi_trace(card->ospriv, UDBG4, "handling %d to-host chunks\n", pending); - - if (!pending) - { - return CSR_RESULT_SUCCESS; - } - - /* - * This is a pointer to the raw data we have read from the f/w. - * Can be a signal or a command. Note that we need to convert - * it to a host structure before we process it. - */ - bufptr = card->th_buffer.buf; - - while (pending > 0) - { - s16 f_flush_count = 0; - - /* - * Command and length are common to signal and bulk data msgs. - * If command == 0 (i.e. a signal), len is number of bytes - * *following* the 2-byte header. - */ - cmd = bufptr[1] >> 4; - sig_len = bufptr[0] + ((bufptr[1] & 0x0F) << 8); - -#ifdef CSR_WIFI_HIP_NOISY - unifi_error(card->ospriv, "Received UniFi msg cmd=%d, len=%d\n", - cmd, sig_len); -#endif /* CSR_WIFI_HIP_NOISY */ - - if ((sig_len == 0) && - ((cmd != SDIO_CMD_CLEAR_SLOT) && (cmd != SDIO_CMD_PADDING))) - { - unifi_error(card->ospriv, "incomplete signal or command: has size zero\n"); - return CSR_RESULT_FAILURE; - } - /* - * Make sure the buffer contains a complete message. - * Signals may occupy multiple chunks, bulk-data commands occupy - * one chunk. - */ - if (cmd == SDIO_CMD_SIGNAL) - { - chunks_in_buf = GET_CHUNKS_FOR(card->config_data.sig_frag_size, (u16)(sig_len + 2)); - } - else - { - chunks_in_buf = 1; - } - - if (chunks_in_buf > (u16)pending) - { - unifi_error(card->ospriv, "incomplete signal (0x%x?): need %d chunks, got %d\n", - GET_SIGNAL_ID(bufptr + 2), - chunks_in_buf, pending); - unifi_error(card->ospriv, " thsw=%d, thsr=%d\n", - card->to_host_signals_w, - card->to_host_signals_r); - return CSR_RESULT_FAILURE; - } - - - switch (cmd) - { - case SDIO_CMD_SIGNAL: - /* This is a signal. Read the rest of it and then handle it. */ -#if defined (CSR_WIFI_HIP_DEBUG_OFFLINE) && defined (CSR_WIFI_HIP_DATA_PLANE_PROFILE) - card->cmd_prof.sdio_cmd_signal++; -#endif - - for (i = 0; i < UNIFI_MAX_DATA_REFERENCES; i++) - { - /* Retrieve dataRefs[i].DataLength */ - u16 data_len = GET_PACKED_DATAREF_LEN(bufptr + 2, i); - - /* - * The bulk data length in the signal can not be greater than - * the maximun length allowed by the SDIO config structure. - */ - if (data_len > card->config_data.data_slot_size) - { - unifi_error(card->ospriv, - "Bulk Data length (%d) exceeds Maximum Bulk Data length (%d)\n", - data_len, card->config_data.data_slot_size); - return CSR_RESULT_FAILURE; - } - - /* - * Len here might not be the same as the length in the - * bulk data slot. The slot length will always be even, - * but len could be odd. - */ - if (data_len != 0) - { - /* Retrieve dataRefs[i].SlotNumber */ - s16 slot = GET_PACKED_DATAREF_SLOT(bufptr + 2, i); - - if (slot >= card->config_data.num_tohost_data_slots) - { - unifi_error(card->ospriv, "!!!bad slot number in to-host signal: %d, sig 0x%X\n", - slot, cmd); - return CSR_RESULT_FAILURE; - } - - data_ptrs.d[i].os_data_ptr = card->to_host_data[slot].os_data_ptr; - data_ptrs.d[i].os_net_buf_ptr = card->to_host_data[slot].os_net_buf_ptr; - data_ptrs.d[i].net_buf_length = card->to_host_data[slot].net_buf_length; - data_ptrs.d[i].data_length = data_len; - } - else - { - UNIFI_INIT_BULK_DATA(&data_ptrs.d[i]); - } - } - - /* - * Log the signal to the UDI, before call unifi_receive_event() as - * it can modify the bulk data. - */ - if (card->udi_hook) - { - (*card->udi_hook)(card->ospriv, bufptr + 2, sig_len, - &data_ptrs, UDI_LOG_TO_HOST); - } - -#ifdef CSR_WIFI_HIP_DATA_PLANE_PROFILE - if (GET_SIGNAL_ID(bufptr + 2) == CSR_MA_PACKET_CONFIRM_ID) - { - card->cmd_prof.tx_cfm_count++; - } - else if (GET_SIGNAL_ID(bufptr + 2) == CSR_MA_PACKET_INDICATION_ID) - { - if (data_ptrs.d[0].os_data_ptr) - { - if ((*data_ptrs.d[0].os_data_ptr) & 0x08) - { - card->cmd_prof.rx_count++; - } - } - } -#endif - /* - * Check if the signal is MA-PACKET.cfm and if so check the status. - * If the status is failure, search through the slot records to find - * if any slots are occupied for this host tag. This can happen if - * f/w has not downloaded the bulkdata and before that itself it has - * signalled the confirm with failure. If it finds a slot with that - * host tag then, it clears the corresponding slot - */ - - if (GET_SIGNAL_ID(bufptr + 2) == CSR_MA_PACKET_CONFIRM_ID) - { - /* Get host tag and transmission status */ - u32 host_tag = GET_PACKED_MA_PACKET_CONFIRM_HOST_TAG(bufptr + 2); - u16 status = GET_PACKED_MA_PACKET_CONFIRM_TRANSMISSION_STATUS(bufptr + 2); - - unifi_trace(card->ospriv, UDBG4, "process_to_host_signals signal ID=%x host Tag=%x status=%x\n", - GET_SIGNAL_ID(bufptr + 2), host_tag, status); - - /* If transmission status is failure then search through the slot records - * and if for any slot records the clear slot is not done then do it now - */ - - if (status && (card->fh_slot_host_tag_record)) - { - u16 num_fh_slots = card->config_data.num_fromhost_data_slots; - - /* search through the list of slot records and match with host tag - * If a slot is not yet cleared then clear the slot from here - */ - for (i = 0; i < num_fh_slots; i++) - { - if (card->fh_slot_host_tag_record[i] == host_tag) - { -#ifdef CSR_WIFI_REQUEUE_PACKET_TO_HAL - /* Invoke the HAL module function to requeue it back to HAL Queues */ - r = unifi_reque_ma_packet_request(card->ospriv, host_tag, status, &card->from_host_data[i].bd); - card->fh_slot_host_tag_record[i] = CSR_WIFI_HIP_RESERVED_HOST_TAG; - if (CSR_RESULT_SUCCESS != r) - { - unifi_trace(card->ospriv, UDBG5, "process_to_host_signals: Failed to requeue Packet(hTag:%x) back to HAL \n", host_tag); - CardClearFromHostDataSlot(card, i); - } - else - { - CardClearFromHostDataSlotWithoutFreeingBulkData(card, i); - } - -#else - unifi_trace(card->ospriv, UDBG4, "process_to_host_signals Clear slot=%x host tag=%x\n", i, host_tag); - card->fh_slot_host_tag_record[i] = CSR_WIFI_HIP_RESERVED_HOST_TAG; - - /* Set length field in from_host_data array to 0 */ - CardClearFromHostDataSlot(card, i); -#endif - break; - } - } - } - } - - /* Pass event to OS layer */ - unifi_receive_event(card->ospriv, bufptr + 2, sig_len, &data_ptrs); - - /* Initialise the to_host data, so it can be re-used. */ - for (i = 0; i < UNIFI_MAX_DATA_REFERENCES; i++) - { - /* The slot is only valid if the length is non-zero. */ - if (GET_PACKED_DATAREF_LEN(bufptr + 2, i) != 0) - { - s16 slot = GET_PACKED_DATAREF_SLOT(bufptr + 2, i); - if (slot < card->config_data.num_tohost_data_slots) - { - UNIFI_INIT_BULK_DATA(&card->to_host_data[slot]); - } - } - } - -#ifndef CSR_WIFI_DEFER_TH_FLUSH - /* - * If we have previously transferred a lot of data, ack - * the signals read so far, so f/w can reclaim the buffer - * memory sooner. - */ - if (bytes_transferred >= TO_HOST_FLUSH_THRESHOLD) - { - f_flush_count = 1; - } -#endif - break; - - - case SDIO_CMD_CLEAR_SLOT: -#if defined (CSR_WIFI_HIP_DEBUG_OFFLINE) && defined (CSR_WIFI_HIP_DATA_PLANE_PROFILE) - card->cmd_prof.sdio_cmd_clear_slot++; -#endif - /* This is a clear slot command. */ - if (sig_len != 0) - { - unifi_error(card->ospriv, "process_to_host_signals: clear slot, bad data len: 0x%X at offset %d\n", - sig_len, bufptr - card->th_buffer.buf); - return CSR_RESULT_FAILURE; - } - - r = process_clear_slot_command(card, bufptr); - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, "Failed to process clear slot\n"); - return r; - } - break; - - case SDIO_CMD_TO_HOST_TRANSFER: - case SDIO_CMD_FROM_HOST_TRANSFER: - case SDIO_CMD_FROM_HOST_AND_CLEAR: - case SDIO_CMD_OVERLAY_TRANSFER: - /* This is a bulk data command. */ - if (sig_len & 1) - { - unifi_error(card->ospriv, "process_to_host_signals: bulk data, bad data len: 0x%X at offset %d\n", - sig_len, bufptr - card->th_buffer.buf); - return CSR_RESULT_FAILURE; - } - - r = process_bulk_data_command(card, bufptr, cmd, sig_len); - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, "Failed to process bulk cmd\n"); - return r; - } - /* Count the bytes transferred */ - bytes_transferred += sig_len; - - if (cmd == SDIO_CMD_FROM_HOST_AND_CLEAR) - { -#if defined (CSR_WIFI_HIP_DEBUG_OFFLINE) && defined (CSR_WIFI_HIP_DATA_PLANE_PROFILE) - card->cmd_prof.sdio_cmd_from_host_and_clear++; -#endif -#ifndef CSR_WIFI_DEFER_TH_FLUSH - f_flush_count = 1; -#endif - } -#if defined (CSR_WIFI_HIP_DEBUG_OFFLINE) && defined (CSR_WIFI_HIP_DATA_PLANE_PROFILE) - else if (cmd == SDIO_CMD_FROM_HOST_TRANSFER) - { - card->cmd_prof.sdio_cmd_from_host++; - } - else if (cmd == SDIO_CMD_TO_HOST_TRANSFER) - { - card->cmd_prof.sdio_cmd_to_host++; - } -#endif - break; - - case SDIO_CMD_PADDING: - break; - - default: - unifi_error(card->ospriv, "Unrecognised to-host command: %d\n", cmd); - break; - } - - bufptr += chunks_in_buf * card->config_data.sig_frag_size; - pending -= chunks_in_buf; - - /* - * Write out the host signal count when a significant - * number of bytes of bulk data have been transferred or - * when we have performed a CopyFromHostAndClear. - */ - if (f_flush_count) - { - r = update_to_host_signals_r(card, pending); - if (r != CSR_RESULT_SUCCESS) - { - return r; - } - bytes_transferred = 0; - } - } - - if (pending) - { - unifi_warning(card->ospriv, "proc_th_sigs: %d unprocessed\n", pending); - } - - /* If we processed any signals, write the updated count to UniFi */ - if (card->th_buffer.count != pending) - { - r = update_to_host_signals_r(card, pending); - if (r != CSR_RESULT_SUCCESS) - { - return r; - } - } - - /* - * Reset the buffer pointer, copying down any un-processed signals. - * This can happen if we enable the optimisation in read_to_host_signals() - * that limits the length to whole blocks. - */ - remaining = card->th_buffer.ptr - bufptr; - if (remaining < 0) - { - unifi_error(card->ospriv, "Processing TH signals overran the buffer\n"); - return CSR_RESULT_FAILURE; - } - if (remaining > 0) - { - /* Use a safe copy because source and destination may overlap */ - u8 *d = card->th_buffer.buf; - u8 *s = bufptr; - s32 n = remaining; - while (n--) - { - *d++ = *s++; - } - } - card->th_buffer.ptr = card->th_buffer.buf + remaining; - - - /* If we reach here then we processed something */ - *processed = 1; - return CSR_RESULT_SUCCESS; -} /* process_to_host_signals() */ - - -/* - * --------------------------------------------------------------------------- - * process_clear_slot_command - * - * Process a clear slot command fom the UniFi. - * - * Arguments: - * card Pointer to card context struct - * bdcmd Pointer to bulk-data command msg from UniFi - * - * Returns: - * 0 on success, CSR error code on error - * --------------------------------------------------------------------------- - */ -static CsrResult process_clear_slot_command(card_t *card, const u8 *cmdptr) -{ - u16 data_slot; - s16 slot; - - data_slot = CSR_GET_UINT16_FROM_LITTLE_ENDIAN(cmdptr + SIZEOF_UINT16); - - unifi_trace(card->ospriv, UDBG4, "Processing clear slot cmd, slot=0x%X\n", - data_slot); - - slot = data_slot & 0x7FFF; - -#ifdef CSR_WIFI_HIP_NOISY - unifi_error(card->ospriv, "CMD clear data slot 0x%04x\n", data_slot); -#endif /* CSR_WIFI_HIP_NOISY */ - - if (data_slot & SLOT_DIR_TO_HOST) - { - if (slot >= card->config_data.num_tohost_data_slots) - { - unifi_error(card->ospriv, - "Invalid to-host data slot in SDIO_CMD_CLEAR_SLOT: %d\n", - slot); - return CSR_RESULT_FAILURE; - } - /* clear to-host data slot */ - unifi_warning(card->ospriv, "Unexpected clear to-host data slot cmd: 0x%04x\n", - data_slot); - } - else - { - if (slot >= card->config_data.num_fromhost_data_slots) - { - unifi_error(card->ospriv, - "Invalid from-host data slot in SDIO_CMD_CLEAR_SLOT: %d\n", - slot); - return CSR_RESULT_FAILURE; - } - - /* - * The driver is the owner to clear all slots now - * Ref - comment in process_fh_traffic_queue - * so it will just ignore the clear slot command from firmware - * and return success - */ - return CSR_RESULT_SUCCESS; - - /* Set length field in from_host_data array to 0 */ - /* CardClearFromHostDataSlot(card, slot); */ - } - - return CSR_RESULT_SUCCESS; -} /* process_clear_slot_command() */ - - -/* - * --------------------------------------------------------------------------- - * process_bulk_data_command - * - * Process a bulk data request from the UniFi. - * - * Arguments: - * card Pointer to card context struct - * bdcmd Pointer to bulk-data command msg from UniFi - * cmd, len Decoded values of command and length from the msg header - * Cmd will only be one of: - * SDIO_CMD_TO_HOST_TRANSFER - * SDIO_CMD_FROM_HOST_TRANSFER - * SDIO_CMD_FROM_HOST_AND_CLEAR - * SDIO_CMD_OVERLAY_TRANSFER - * - * Returns: - * CSR_RESULT_SUCCESS on success, CSR error code on error - * --------------------------------------------------------------------------- - */ -static CsrResult process_bulk_data_command(card_t *card, const u8 *cmdptr, - s16 cmd, u16 len) -{ - bulk_data_desc_t *bdslot; -#ifdef CSR_WIFI_ALIGNMENT_WORKAROUND - u8 *host_bulk_data_slot; -#endif - bulk_data_cmd_t bdcmd; - s16 offset; - s16 slot; - s16 dir; - CsrResult r; - - read_unpack_cmd(cmdptr, &bdcmd); - - unifi_trace(card->ospriv, UDBG4, "Processing bulk data cmd %d %s, len=%d, slot=0x%X\n", - cmd, lookup_bulkcmd_name(cmd), len, bdcmd.data_slot); - - /* - * Round up the transfer length if required. - * This is useful to force all transfers to be a multiple of the SDIO block - * size, so the SDIO driver won't try to use a byte-mode CMD53. These are - * broken on some hardware platforms. - */ - if (card->sdio_io_block_pad) - { - len = (len + card->sdio_io_block_size - 1) & ~(card->sdio_io_block_size - 1); - unifi_trace(card->ospriv, UDBG4, "Rounded bulk data length up to %d\n", len); - } - - slot = bdcmd.data_slot & 0x7FFF; - - if (cmd == SDIO_CMD_OVERLAY_TRANSFER) - { - return CSR_WIFI_HIP_RESULT_INVALID_VALUE; /* Not used on CSR6xxx */ - } - else - { - if (bdcmd.data_slot & SLOT_DIR_TO_HOST) - { - /* Request is for to-host bulk data */ - - /* Check sanity of slot number */ - if (slot >= card->config_data.num_tohost_data_slots) - { - unifi_error(card->ospriv, - "Invalid to-host data slot in SDIO bulk xfr req: %d\n", - slot); - return CSR_RESULT_FAILURE; - } - - /* Allocate memory for card->to_host_data[slot] bulk data here. */ -#ifdef CSR_PRE_ALLOC_NET_DATA - r = prealloc_netdata_get(card, &card->to_host_data[slot], len); -#else - r = unifi_net_data_malloc(card->ospriv, &card->to_host_data[slot], len); -#endif - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, "Failed to allocate t-h bulk data\n"); - return CSR_RESULT_FAILURE; - } - - bdslot = &card->to_host_data[slot]; - - /* Make sure that the buffer is 4-bytes aligned */ - r = unifi_net_dma_align(card->ospriv, bdslot); - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, "Failed to align t-h bulk data buffer for DMA\n"); - return CSR_RESULT_FAILURE; - } - } - else - { - /* Request is for from-host bulk data */ - - if (slot >= card->config_data.num_fromhost_data_slots) - { - unifi_error(card->ospriv, - "Invalid from-host data slot in SDIO bulk xfr req: %d\n", - slot); - return CSR_RESULT_FAILURE; - } - bdslot = &card->from_host_data[slot].bd; - } - offset = bdcmd.offset; - } - /* Do the transfer */ - dir = (cmd == SDIO_CMD_TO_HOST_TRANSFER)? - UNIFI_SDIO_READ : UNIFI_SDIO_WRITE; - - unifi_trace(card->ospriv, UDBG4, - "Bulk %c %s len=%d, handle %d - slot=%d %p+(%d)\n", - (dir == UNIFI_SDIO_READ)?'R' : 'W', - lookup_bulkcmd_name(cmd), - len, - bdcmd.buffer_handle, - slot, bdslot->os_data_ptr, offset); -#ifdef CSR_WIFI_HIP_NOISY - unifi_error(card->ospriv, "Bulk %s len=%d, handle %d - slot=%d %p+(%d)\n", - lookup_bulkcmd_name(cmd), - len, - bdcmd.buffer_handle, - slot, bdslot->os_data_ptr, offset); -#endif /* CSR_WIFI_HIP_NOISY */ - - - if (bdslot->os_data_ptr == NULL) - { - unifi_error(card->ospriv, "Null os_data_ptr - Bulk %s handle %d - slot=%d o=(%d)\n", - lookup_bulkcmd_name(cmd), - bdcmd.buffer_handle, - slot, - offset); - return CSR_WIFI_HIP_RESULT_INVALID_VALUE; - } - -#ifdef CSR_WIFI_ALIGNMENT_WORKAROUND - /* if os_data_ptr is not 4-byte aligned, then allocate a new buffer and copy data - to new buffer to ensure the address passed to unifi_bulk_rw is 4-byte aligned */ - - if (len != 0 && (dir == UNIFI_SDIO_WRITE) && (((ptrdiff_t)bdslot->os_data_ptr + offset) & 3)) - { - host_bulk_data_slot = kmalloc(len, GFP_KERNEL); - - if (!host_bulk_data_slot) - { - unifi_error(card->ospriv, " failed to allocate request_data before unifi_bulk_rw\n"); - return -1; - } - - memcpy((void *)host_bulk_data_slot, - (void *)(bdslot->os_data_ptr + offset), len); - - r = unifi_bulk_rw(card, - bdcmd.buffer_handle, - (void *)host_bulk_data_slot, - len, - dir); - } - else -#endif - { - r = unifi_bulk_rw(card, - bdcmd.buffer_handle, - (void *)(bdslot->os_data_ptr + offset), - len, - dir); - } - - if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE) - { - return r; - } - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, - "Failed: %s hlen=%d, slen=%d, handle %d - slot=%d %p+0x%X\n", - lookup_bulkcmd_name(cmd), - len, /* Header length */ - bdslot->data_length, /* Length stored in slot */ - bdcmd.buffer_handle, - slot, bdslot->os_data_ptr, offset); - return r; - } - - bdslot->data_length = len; - - if (cmd == SDIO_CMD_FROM_HOST_AND_CLEAR) - { - if (slot >= card->config_data.num_fromhost_data_slots) - { - unifi_error(card->ospriv, - "Invalid from-host data slot in SDIO_CMD_FROM_HOST_AND_CLEAR: %d\n", - slot); - return CSR_RESULT_FAILURE; - } - -#ifdef CSR_WIFI_ALIGNMENT_WORKAROUND - /* moving this check before we clear host data slot */ - if ((len != 0) && (dir == UNIFI_SDIO_WRITE) && (((ptrdiff_t)bdslot->os_data_ptr + offset) & 3)) - { - kfree(host_bulk_data_slot); - } -#endif - - if (card->fh_slot_host_tag_record) - { - unifi_trace(card->ospriv, UDBG5, "CopyFromHostAndClearSlot Reset entry for slot=%d\n", slot); - - /* reset the host tag entry for the corresponding slot */ - card->fh_slot_host_tag_record[slot] = CSR_WIFI_HIP_RESERVED_HOST_TAG; - } - - - /* Set length field in from_host_data array to 0 */ - CardClearFromHostDataSlot(card, slot); - } - - return CSR_RESULT_SUCCESS; -} /* process_bulk_data_command() */ - - -/* - * --------------------------------------------------------------------------- - * check_fh_sig_slots - * - * Check whether there are <n> free signal slots available on UniFi. - * This takes into account the signals already batched since the - * from_host_signal counts were last read. - * If the from_host_signal counts indicate not enough space, we read - * the latest count from UniFi to see if some more have been freed. - * - * Arguments: - * None. - * - * Returns: - * CSR_RESULT_SUCCESS, otherwise CSR error code on error. - * --------------------------------------------------------------------------- - */ -static CsrResult check_fh_sig_slots(card_t *card, u16 needed, s32 *space_fh) -{ - u32 count_fhw; - u32 occupied_fh, slots_fh; - s32 count_fhr; - - count_fhw = card->from_host_signals_w; - count_fhr = card->from_host_signals_r; - slots_fh = card->config_data.num_fromhost_sig_frags; - - /* Only read the space in from-host queue if necessary */ - occupied_fh = (count_fhw - count_fhr) % 128; - - if (slots_fh < occupied_fh) - { - *space_fh = 0; - } - else - { - *space_fh = slots_fh - occupied_fh; - } - - if ((occupied_fh != 0) && (*space_fh < needed)) - { - count_fhr = unifi_read_shared_count(card, card->sdio_ctrl_addr + 2); - if (count_fhr < 0) - { - unifi_error(card->ospriv, "Failed to read from-host sig read count\n"); - return CSR_RESULT_FAILURE; - } - card->from_host_signals_r = count_fhr; /* diag */ - - occupied_fh = (count_fhw - count_fhr) % 128; - *space_fh = slots_fh - occupied_fh; - } - - return CSR_RESULT_SUCCESS; -} /* check_fh_sig_slots() */ - - -/* -* If we are padding the From-Host signals to the SDIO block size, -* we need to round up the needed_chunks to the SDIO block size. -*/ -#define ROUND_UP_NEEDED_CHUNKS(_card, _needed_chunks) \ - { \ - u16 _chunks_per_block; \ - u16 _chunks_in_last_block; \ - \ - if (_card->sdio_io_block_pad) \ - { \ - _chunks_per_block = _card->sdio_io_block_size / _card->config_data.sig_frag_size; \ - _chunks_in_last_block = _needed_chunks % _chunks_per_block; \ - if (_chunks_in_last_block != 0) \ - { \ - _needed_chunks = _needed_chunks + (_chunks_per_block - _chunks_in_last_block); \ - } \ - } \ - } - - -#define ROUND_UP_SPACE_CHUNKS(_card, _space_chunks) \ - { \ - u16 _chunks_per_block; \ - \ - if (_card->sdio_io_block_pad) \ - { \ - _chunks_per_block = _card->sdio_io_block_size / _card->config_data.sig_frag_size; \ - _space_chunks = ((_space_chunks / _chunks_per_block) * _chunks_per_block); \ - } \ - } - - - - - -/* - * --------------------------------------------------------------------------- - * process_fh_cmd_queue - * - * Take one signal off the from-host queue and copy it to the UniFi. - * Does nothing if the UniFi has no slots free. - * - * Arguments: - * card Pointer to card context struct - * processed Location to write: - * 0 if there is nothing on the queue to process - * 1 if a signal was successfully processed - * - * Returns: - * CSR error code if an error occurred. - * - * Notes: - * The from-host queue contains signal requests from the network driver - * and any UDI clients interspersed. UDI clients' requests have been stored - * in the from-host queue using the wire-format structures, as they arrive. - * All other requests are stored in the from-host queue using the host - * (cpu specific) structures. We use the is_packed member of the card_signal_t - * structure that describes the queue to make the distinction. - * --------------------------------------------------------------------------- - */ -static CsrResult process_fh_cmd_queue(card_t *card, s32 *processed) -{ - q_t *sigq = &card->fh_command_queue; - - CsrResult r; - u16 pending_sigs; - u16 pending_chunks; - u16 needed_chunks; - s32 space_chunks; - u16 q_index; - - *processed = 0; - - /* Get the number of pending signals. */ - pending_sigs = CSR_WIFI_HIP_Q_SLOTS_USED(sigq); - unifi_trace(card->ospriv, UDBG5, "proc_fh: %d pending\n", pending_sigs); - if (pending_sigs == 0) - { - /* Nothing to do */ - return CSR_RESULT_SUCCESS; - } - - /* Work out how many chunks we have waiting to send */ - for (pending_chunks = 0, q_index = CSR_WIFI_HIP_Q_NEXT_R_SLOT(sigq); - q_index != CSR_WIFI_HIP_Q_NEXT_W_SLOT(sigq); - q_index = CSR_WIFI_HIP_Q_WRAP(sigq, q_index + 1)) - { - card_signal_t *csptr = CSR_WIFI_HIP_Q_SLOT_DATA(sigq, q_index); - - /* - * Note that GET_CHUNKS_FOR() needs the size of the packed - * (wire-formatted) structure - */ - pending_chunks += GET_CHUNKS_FOR(card->config_data.sig_frag_size, (u16)(csptr->signal_length + 2)); - } - - /* - * Check whether UniFi has space for all the buffered bulk-data - * commands and signals as well. - */ - needed_chunks = pending_chunks + card->fh_buffer.count; - - /* Round up to the block size if necessary */ - ROUND_UP_NEEDED_CHUNKS(card, needed_chunks); - - r = check_fh_sig_slots(card, needed_chunks, &space_chunks); - if (r != CSR_RESULT_SUCCESS) - { - /* Error */ - unifi_error(card->ospriv, "Failed to read fh sig count\n"); - return r; - } - -#ifdef CSR_WIFI_HIP_NOISY - unifi_error(card->ospriv, "proc_fh: %d chunks free, need %d\n", - space_chunks, needed_chunks); -#endif /* CSR_WIFI_HIP_NOISY */ - - - /* - * Coalesce as many from-host signals as possible - * into a single block and write using a single CMD53 - */ - if (needed_chunks > (u16)space_chunks) - { - /* Round up to the block size if necessary */ - ROUND_UP_SPACE_CHUNKS(card, space_chunks); - - /* - * If the f/w has less free chunks than those already pending - * return immediately. - */ - if ((u16)space_chunks <= card->fh_buffer.count) - { - /* - * No room in UniFi for any signals after the buffered bulk - * data commands have been sent. - */ - unifi_error(card->ospriv, "not enough room to send signals, need %d chunks, %d free\n", - card->fh_buffer.count, space_chunks); - card->generate_interrupt = 1; - return CSR_RESULT_SUCCESS; - } - pending_chunks = (u16)(space_chunks - card->fh_buffer.count); - } - - while (pending_sigs-- && pending_chunks > 0) - { - card_signal_t *csptr; - s16 i; - u16 sig_chunks, total_length, free_chunks_in_fh_buffer; - bulk_data_param_t bulkdata; - u8 *packed_sigptr; - u16 signal_length = 0; - - /* Retrieve the entry at the head of the queue */ - q_index = CSR_WIFI_HIP_Q_NEXT_R_SLOT(sigq); - - /* Get a pointer to the containing card_signal_t struct */ - csptr = CSR_WIFI_HIP_Q_SLOT_DATA(sigq, q_index); - - /* Get the new length of the packed signal */ - signal_length = csptr->signal_length; - - if ((signal_length & 1) || (signal_length > UNIFI_PACKED_SIGBUF_SIZE)) - { - unifi_error(card->ospriv, "process_fh_queue: Bad len: %d\n", signal_length); - return CSR_RESULT_FAILURE; - } - - /* Need space for 2-byte SDIO protocol header + signal */ - sig_chunks = GET_CHUNKS_FOR(card->config_data.sig_frag_size, (u16)(signal_length + 2)); - - free_chunks_in_fh_buffer = GET_CHUNKS_FOR(card->config_data.sig_frag_size, - (u16)((card->fh_buffer.buf + UNIFI_FH_BUF_SIZE) - card->fh_buffer.ptr)); - if (free_chunks_in_fh_buffer < sig_chunks) - { - /* No more room */ - unifi_notice(card->ospriv, "proc_fh_cmd_q: no room in fh buffer for 0x%.4X, deferring\n", - (u16)(GET_SIGNAL_ID(csptr->sigbuf))); - break; - } - - packed_sigptr = csptr->sigbuf; - - /* Claim and set up a from-host data slot */ - if (CSR_RESULT_FAILURE == CardWriteBulkData(card, csptr, UNIFI_TRAFFIC_Q_MLME)) - { - unifi_notice(card->ospriv, "proc_fh_cmd_q: no fh data slots for 0x%.4X, deferring\n", - (u16)(GET_SIGNAL_ID(csptr->sigbuf))); - break; - } - - for (i = 0; i < UNIFI_MAX_DATA_REFERENCES; i++) - { - if (csptr->bulkdata[i].data_length == 0) - { - UNIFI_INIT_BULK_DATA(&bulkdata.d[i]); - } - else - { - bulkdata.d[i].os_data_ptr = csptr->bulkdata[i].os_data_ptr; - bulkdata.d[i].data_length = csptr->bulkdata[i].data_length; - } - - /* Pass the free responsibility to the lower layer. */ - UNIFI_INIT_BULK_DATA(&csptr->bulkdata[i]); - } - - unifi_trace(card->ospriv, UDBG2, "Sending signal 0x%.4X\n", - GET_SIGNAL_ID(packed_sigptr)); -#ifdef CSR_WIFI_HIP_NOISY - unifi_error(card->ospriv, "Sending signal 0x%.4X\n", - GET_SIGNAL_ID(packed_sigptr)); -#endif /* CSR_WIFI_HIP_NOISY */ - - - /* Append packed signal to F-H buffer */ - total_length = sig_chunks * card->config_data.sig_frag_size; - - card->fh_buffer.ptr[0] = (u8)(signal_length & 0xff); - card->fh_buffer.ptr[1] = - (u8)(((signal_length >> 8) & 0xf) | (SDIO_CMD_SIGNAL << 4)); - - memcpy(card->fh_buffer.ptr + 2, packed_sigptr, signal_length); - memset(card->fh_buffer.ptr + 2 + signal_length, 0, - total_length - (2 + signal_length)); - -#ifdef CSR_WIFI_HIP_NOISY - unifi_error(card->ospriv, "proc_fh: fh_buffer %d bytes \n", - signal_length + 2); - dump(card->fh_buffer.ptr, signal_length + 2); - unifi_trace(card->ospriv, UDBG1, " \n"); -#endif /* CSR_WIFI_HIP_NOISY */ - - card->fh_buffer.ptr += total_length; - card->fh_buffer.count += sig_chunks; - -#ifdef CSR_WIFI_HIP_NOISY - unifi_error(card->ospriv, "Added %d to fh buf, len now %d, count %d\n", - signal_length, - card->fh_buffer.ptr - card->fh_buffer.buf, - card->fh_buffer.count); -#endif /* CSR_WIFI_HIP_NOISY */ - - (*processed)++; - pending_chunks -= sig_chunks; - - /* Log the signal to the UDI. */ - /* UDI will get the packed structure */ - /* Can not log the unpacked signal, unless we reconstruct it! */ - if (card->udi_hook) - { - (*card->udi_hook)(card->ospriv, packed_sigptr, signal_length, - &bulkdata, UDI_LOG_FROM_HOST); - } - - /* Remove entry from q */ - csptr->signal_length = 0; - CSR_WIFI_HIP_Q_INC_R(sigq); - } - - return CSR_RESULT_SUCCESS; -} /* process_fh_cmd_queue() */ - - -/* - * --------------------------------------------------------------------------- - * process_fh_traffic_queue - * - * Take signals off the from-host queue and copy them to the UniFi. - * Does nothing if the UniFi has no slots free. - * - * Arguments: - * card Pointer to card context struct - * sigq Pointer to the traffic queue - * processed Pointer to location to write: - * 0 if there is nothing on the queue to process - * 1 if a signal was successfully processed - * - * Returns: - * CSR error code if an error occurred. - * - * Notes: - * The from-host queue contains signal requests from the network driver - * and any UDI clients interspersed. - * --------------------------------------------------------------------------- - */ -static CsrResult process_fh_traffic_queue(card_t *card, s32 *processed) -{ - q_t *sigq = card->fh_traffic_queue; - - CsrResult r; - s16 n = 0; - s32 q_no; - u16 pending_sigs = 0; - u16 pending_chunks = 0; - u16 needed_chunks; - s32 space_chunks; - u16 q_index; - u32 host_tag = 0; - u16 slot_num = 0; - - *processed = 0; - - /* calculate how many signals are in queues and how many chunks are needed. */ - for (n = UNIFI_NO_OF_TX_QS - 1; n >= 0; n--) - { - /* Get the number of pending signals. */ - pending_sigs += CSR_WIFI_HIP_Q_SLOTS_USED(&sigq[n]); - unifi_trace(card->ospriv, UDBG5, "proc_fh%d: %d pending\n", n, pending_sigs); - - /* Work out how many chunks we have waiting to send */ - for (q_index = CSR_WIFI_HIP_Q_NEXT_R_SLOT(&sigq[n]); - q_index != CSR_WIFI_HIP_Q_NEXT_W_SLOT(&sigq[n]); - q_index = CSR_WIFI_HIP_Q_WRAP(&sigq[n], q_index + 1)) - { - card_signal_t *csptr = CSR_WIFI_HIP_Q_SLOT_DATA(&sigq[n], q_index); - - /* - * Note that GET_CHUNKS_FOR() needs the size of the packed - * (wire-formatted) structure - */ - pending_chunks += GET_CHUNKS_FOR(card->config_data.sig_frag_size, (u16)(csptr->signal_length + 2)); - } - } - - /* If there are no pending signals, just return */ - if (pending_sigs == 0) - { - /* Nothing to do */ - return CSR_RESULT_SUCCESS; - } - - /* - * Check whether UniFi has space for all the buffered bulk-data - * commands and signals as well. - */ - needed_chunks = pending_chunks + card->fh_buffer.count; - - /* Round up to the block size if necessary */ - ROUND_UP_NEEDED_CHUNKS(card, needed_chunks); - - r = check_fh_sig_slots(card, needed_chunks, &space_chunks); - if (r != CSR_RESULT_SUCCESS) - { - /* Error */ - unifi_error(card->ospriv, "Failed to read fh sig count\n"); - return r; - } - -#ifdef CSR_WIFI_HIP_NOISY - unifi_error(card->ospriv, - "process_fh_traffic_queue: %d chunks free, need %d\n", - space_chunks, needed_chunks); - read_fhsr(card); /* debugging only */ -#endif /* CSR_WIFI_HIP_NOISY */ - - /* Coalesce as many from-host signals as possible - into a single block and write using a single CMD53 */ - if (needed_chunks > (u16)space_chunks) - { - /* Round up to the block size if necessary */ - ROUND_UP_SPACE_CHUNKS(card, space_chunks); - - if ((u16)space_chunks <= card->fh_buffer.count) - { - /* - * No room in UniFi for any signals after the buffered bulk - * data commands have been sent. - */ - unifi_error(card->ospriv, "not enough room to send signals, need %d chunks, %d free\n", - card->fh_buffer.count, space_chunks); - card->generate_interrupt = 1; - return 0; - } - - pending_chunks = (u16)space_chunks - card->fh_buffer.count; - } - - q_no = UNIFI_NO_OF_TX_QS - 1; - - /* - * pending_sigs will be exhausted if there are is no restriction to the pending - * signals per queue. pending_chunks may be exhausted if there is a restriction. - * q_no check will be exhausted if there is a restriction and our round-robin - * algorith fails to fill all chunks. - */ - do - { - card_signal_t *csptr; - u16 sig_chunks, total_length, free_chunks_in_fh_buffer; - bulk_data_param_t bulkdata; - u8 *packed_sigptr; - u16 signal_length = 0; - - /* if this queue is empty go to next one. */ - if (CSR_WIFI_HIP_Q_SLOTS_USED(&sigq[q_no]) == 0) - { - q_no--; - continue; - } - - /* Retrieve the entry at the head of the queue */ - q_index = CSR_WIFI_HIP_Q_NEXT_R_SLOT(&sigq[q_no]); - - /* Get a pointer to the containing card_signal_t struct */ - csptr = CSR_WIFI_HIP_Q_SLOT_DATA(&sigq[q_no], q_index); - - /* Get the new length of the packed signal */ - signal_length = csptr->signal_length; - - if ((signal_length & 1) || (signal_length > UNIFI_PACKED_SIGBUF_SIZE)) - { - unifi_error(card->ospriv, "process_fh_traffic_queue: Bad len: %d\n", signal_length); - return CSR_RESULT_FAILURE; - } - - /* Need space for 2-byte SDIO protocol header + signal */ - sig_chunks = GET_CHUNKS_FOR(card->config_data.sig_frag_size, (u16)(signal_length + 2)); - free_chunks_in_fh_buffer = GET_CHUNKS_FOR(card->config_data.sig_frag_size, - (u16)((card->fh_buffer.buf + UNIFI_FH_BUF_SIZE) - card->fh_buffer.ptr)); - if (free_chunks_in_fh_buffer < sig_chunks) - { - /* No more room */ - unifi_notice(card->ospriv, "process_fh_traffic_queue: no more chunks.\n"); - break; - } - - packed_sigptr = csptr->sigbuf; - /* Claim and set up a from-host data slot */ - if (CSR_RESULT_FAILURE == CardWriteBulkData(card, csptr, (unifi_TrafficQueue)q_no)) - { - q_no--; - continue; - } - - /* Sanity check: MA-PACKET.req must have a valid bulk data */ - if ((csptr->bulkdata[0].data_length == 0) || (csptr->bulkdata[0].os_data_ptr == NULL)) - { - unifi_error(card->ospriv, "MA-PACKET.req with empty bulk data (%d bytes in %p)\n", - csptr->bulkdata[0].data_length, csptr->bulkdata[0].os_data_ptr); - dump(packed_sigptr, signal_length); - return CSR_RESULT_FAILURE; - } - - bulkdata.d[0].os_data_ptr = csptr->bulkdata[0].os_data_ptr; - bulkdata.d[0].data_length = csptr->bulkdata[0].data_length; - bulkdata.d[0].os_net_buf_ptr = csptr->bulkdata[0].os_net_buf_ptr; - bulkdata.d[0].net_buf_length = csptr->bulkdata[0].net_buf_length; - - /* The driver owns clearing of HIP slots for following scenario - * - driver has requested a MA-PACKET.req signal - * - The f/w after receiving the signal decides it can't send it out due to various reasons - * - So the f/w without downloading the bulk data decides to just send a confirmation with fail - * - and then sends a clear slot signal to HIP - * - * But in some cases the clear slot signal never comes and the slot remains --NOT-- freed for ever - * - * To handle this, HIP will keep the record of host tag for each occupied slot - * and then based on status of that Host tag and slot the driver will decide if the slot is - * cleared by f/w signal or the slot has to be freed by driver - */ - - if (card->fh_slot_host_tag_record) - { - /* Update the f-h slot record for the corresponding host tag */ - host_tag = GET_PACKED_MA_PACKET_REQUEST_HOST_TAG(packed_sigptr); - slot_num = GET_PACKED_DATAREF_SLOT(packed_sigptr, 0) & 0x00FF; - - unifi_trace(card->ospriv, UDBG5, - "process_fh_traffic_queue signal ID =%x fh slot=%x Host tag =%x\n", - GET_SIGNAL_ID(packed_sigptr), slot_num, host_tag); - card->fh_slot_host_tag_record[slot_num] = host_tag; - } - UNIFI_INIT_BULK_DATA(&bulkdata.d[1]); - UNIFI_INIT_BULK_DATA(&csptr->bulkdata[0]); - UNIFI_INIT_BULK_DATA(&csptr->bulkdata[1]); - -#ifdef CSR_WIFI_HIP_DATA_PLANE_PROFILE - if (bulkdata.d[0].os_data_ptr) - { - if ((*bulkdata.d[0].os_data_ptr) & 0x08) - { - card->cmd_prof.tx_count++; - } - } -#endif - unifi_trace(card->ospriv, UDBG3, "Sending signal 0x%.4X\n", - GET_SIGNAL_ID(packed_sigptr)); -#ifdef CSR_WIFI_HIP_NOISY - unifi_error(card->ospriv, "Sending signal 0x%.4X\n", - GET_SIGNAL_ID(packed_sigptr)); -#endif /* CSR_WIFI_HIP_NOISY */ - - /* Append packed signal to F-H buffer */ - total_length = sig_chunks * card->config_data.sig_frag_size; - - card->fh_buffer.ptr[0] = (u8)(signal_length & 0xff); - card->fh_buffer.ptr[1] = - (u8)(((signal_length >> 8) & 0xf) | (SDIO_CMD_SIGNAL << 4)); - - memcpy(card->fh_buffer.ptr + 2, packed_sigptr, signal_length); - memset(card->fh_buffer.ptr + 2 + signal_length, 0, - total_length - (2 + signal_length)); - -#ifdef CSR_WIFI_HIP_NOISY - unifi_error(card->ospriv, "proc_fh: fh_buffer %d bytes \n", - signal_length + 2); - dump(card->fh_buffer.ptr, signal_length + 2); - unifi_trace(card->ospriv, UDBG1, " \n"); -#endif /* CSR_WIFI_HIP_NOISY */ - - card->fh_buffer.ptr += total_length; - card->fh_buffer.count += sig_chunks; - -#ifdef CSR_WIFI_HIP_NOISY - unifi_error(card->ospriv, "Added %d to fh buf, len now %d, count %d\n", - signal_length, - card->fh_buffer.ptr - card->fh_buffer.buf, - card->fh_buffer.count); -#endif /* CSR_WIFI_HIP_NOISY */ - - (*processed)++; - pending_sigs--; - pending_chunks -= sig_chunks; - - /* Log the signal to the UDI. */ - /* UDI will get the packed structure */ - /* Can not log the unpacked signal, unless we reconstruct it! */ - if (card->udi_hook) - { - (*card->udi_hook)(card->ospriv, packed_sigptr, signal_length, - &bulkdata, UDI_LOG_FROM_HOST); - } - - /* Remove entry from q */ - csptr->signal_length = 0; - /* Note that the traffic queue has only one valid bulk data buffer. */ - csptr->bulkdata[0].data_length = 0; - - CSR_WIFI_HIP_Q_INC_R(&sigq[q_no]); - } while ((pending_sigs > 0) && (pending_chunks > 0) && (q_no >= 0)); - - return CSR_RESULT_SUCCESS; -} /* process_fh_traffic_queue() */ - - -/* - * --------------------------------------------------------------------------- - * flush_fh_buffer - * - * Write out the cache from-hosts signals to the UniFi. - * - * Arguments: - * card Pointer to card context struct - * - * Returns: - * CSR error code if an SDIO error occurred. - * --------------------------------------------------------------------------- - */ -static CsrResult flush_fh_buffer(card_t *card) -{ - CsrResult r; - u16 len; - u16 sig_units; - u16 data_round; - u16 chunks_in_last_block; - u16 padding_chunks; - u16 i; - - len = card->fh_buffer.ptr - card->fh_buffer.buf; - -#ifdef CSR_WIFI_HIP_NOISY - unifi_error(card->ospriv, "fh_buffer is at %p, ptr= %p\n", - card->fh_buffer.buf, card->fh_buffer.ptr); -#endif /* CSR_WIFI_HIP_NOISY */ - - if (len == 0) - { - return CSR_RESULT_SUCCESS; - } - -#ifdef CSR_WIFI_HIP_NOISY - if (dump_fh_buf) - { - dump(card->fh_buffer.buf, len); - dump_fh_buf = 0; - } -#endif /* CSR_WIFI_HIP_NOISY */ - - if (card->sdio_io_block_pad) - { - /* Both of these are powers of 2 */ - sig_units = card->config_data.sig_frag_size; - data_round = card->sdio_io_block_size; - - if (data_round > sig_units) - { - chunks_in_last_block = (len % data_round) / sig_units; - - if (chunks_in_last_block != 0) - { - padding_chunks = (data_round / sig_units) - chunks_in_last_block; - - memset(card->fh_buffer.ptr, 0, padding_chunks * sig_units); - for (i = 0; i < padding_chunks; i++) - { - card->fh_buffer.ptr[1] = SDIO_CMD_PADDING << 4; - card->fh_buffer.ptr += sig_units; - } - - card->fh_buffer.count += padding_chunks; - len += padding_chunks * sig_units; - } - } - } - - r = unifi_bulk_rw(card, - card->config_data.fromhost_sigbuf_handle, - card->fh_buffer.buf, - len, UNIFI_SDIO_WRITE); - if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE) - { - return r; - } - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, "Failed to write fh signals: %u bytes, error %d\n", len, r); - return r; - } - - /* Update from-host-signals-written signal count */ - card->from_host_signals_w = - (card->from_host_signals_w + card->fh_buffer.count) % 128u; - r = unifi_write_8_or_16(card, card->sdio_ctrl_addr + 0, - (u8)card->from_host_signals_w); - if (r != CSR_RESULT_SUCCESS) - { - unifi_error(card->ospriv, "Failed to write fh signal count %u with error %d\n", - card->from_host_signals_w, r); - return r; - } - card->generate_interrupt = 1; - - /* Reset the fh buffer pointer */ - card->fh_buffer.ptr = card->fh_buffer.buf; - card->fh_buffer.count = 0; - -#ifdef CSR_WIFI_HIP_NOISY - unifi_error(card->ospriv, "END flush: fh len %d, count %d\n", - card->fh_buffer.ptr - card->fh_buffer.buf, - card->fh_buffer.count); -#endif /* CSR_WIFI_HIP_NOISY */ - - return CSR_RESULT_SUCCESS; -} /* flush_fh_buffer() */ - - -/* - * --------------------------------------------------------------------------- - * restart_packet_flow - * - * This function is called before the bottom-half thread sleeps. - * It checks whether both data and signal resources are available and - * then calls the OS-layer function to re-enable packet transmission. - * - * Arguments: - * card Pointer to card context struct - * - * Returns: - * None. - * --------------------------------------------------------------------------- - */ -static void restart_packet_flow(card_t *card) -{ - u8 q; - - /* - * We only look at the fh_traffic_queue, because that is where packets from - * the network stack are placed. - */ - for (q = 0; q <= UNIFI_TRAFFIC_Q_VO; q++) - { - if (card_is_tx_q_paused(card, q) && - CSR_WIFI_HIP_Q_SLOTS_FREE(&card->fh_traffic_queue[q]) >= RESUME_XMIT_THRESHOLD) - { -#if defined (CSR_WIFI_HIP_DEBUG_OFFLINE) && defined (CSR_WIFI_HIP_DATA_PLANE_PROFILE) - unifi_debug_log_to_buf("U"); -#endif - card_tx_q_unpause(card, q); - unifi_restart_xmit(card->ospriv, (unifi_TrafficQueue)q); - } - } -} /* restart_packet_flow() */ - - |