diff options
Diffstat (limited to 'drivers/staging/vme')
-rw-r--r-- | drivers/staging/vme/Kconfig | 17 | ||||
-rw-r--r-- | drivers/staging/vme/Makefile | 7 | ||||
-rw-r--r-- | drivers/staging/vme/TODO | 98 | ||||
-rw-r--r-- | drivers/staging/vme/bridges/Kconfig | 13 | ||||
-rw-r--r-- | drivers/staging/vme/bridges/Makefile | 2 | ||||
-rw-r--r-- | drivers/staging/vme/bridges/vme_ca91cx42.c | 1933 | ||||
-rw-r--r-- | drivers/staging/vme/bridges/vme_ca91cx42.h | 505 | ||||
-rw-r--r-- | drivers/staging/vme/bridges/vme_tsi148.c | 2925 | ||||
-rw-r--r-- | drivers/staging/vme/bridges/vme_tsi148.h | 1387 | ||||
-rw-r--r-- | drivers/staging/vme/devices/Kconfig | 8 | ||||
-rw-r--r-- | drivers/staging/vme/devices/Makefile | 5 | ||||
-rw-r--r-- | drivers/staging/vme/devices/vme_user.c | 826 | ||||
-rw-r--r-- | drivers/staging/vme/devices/vme_user.h | 52 | ||||
-rw-r--r-- | drivers/staging/vme/vme.c | 1497 | ||||
-rw-r--r-- | drivers/staging/vme/vme.h | 161 | ||||
-rw-r--r-- | drivers/staging/vme/vme_api.txt | 372 | ||||
-rw-r--r-- | drivers/staging/vme/vme_bridge.h | 261 |
17 files changed, 10069 insertions, 0 deletions
diff --git a/drivers/staging/vme/Kconfig b/drivers/staging/vme/Kconfig new file mode 100644 index 0000000..ae628a5 --- /dev/null +++ b/drivers/staging/vme/Kconfig @@ -0,0 +1,17 @@ +# +# VME configuration. +# + +menuconfig VME_BUS + tristate "VME bridge support" + depends on PCI + ---help--- + If you say Y here you get support for the VME bridge Framework. + +if VME_BUS + +source "drivers/staging/vme/bridges/Kconfig" + +source "drivers/staging/vme/devices/Kconfig" + +endif # VME diff --git a/drivers/staging/vme/Makefile b/drivers/staging/vme/Makefile new file mode 100644 index 0000000..8c3b90e --- /dev/null +++ b/drivers/staging/vme/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the VME bridge device drivers. +# +obj-$(CONFIG_VME_BUS) += vme.o + +obj-y += bridges/ +obj-y += devices/ diff --git a/drivers/staging/vme/TODO b/drivers/staging/vme/TODO new file mode 100644 index 0000000..adc5fca --- /dev/null +++ b/drivers/staging/vme/TODO @@ -0,0 +1,98 @@ + TODO + ==== + +API +=== + +DMA Resource Allocation incomplete +---------------------------------- + +The current DMA resource Allocation provides no means of selecting the +suitability of a DMA controller based on it's supported modes of operation, as +opposed to the resource allocation mechanisms for master and slave windows: + + struct vme_resource *vme_request_dma(struct device *dev); + +As opposed to: + + struct vme_resource * vme_master_request(struct device *dev, + vme_address_t aspace, vme_cycle_t cycle, vme_width_t width); + +The TSI148 can perform, VME-to-PCI, PCI-to-VME, PATTERN-to-VME, PATTERN-to-PCI, +VME-to-VME and PCI-to-PCI transfers. The CA91C142 can only provide VME-to-PCI +and PCI-to-VME. + +Add a mechanism to select a VME controller based on source/target type, +required aspace, cycle and width requirements. + + +Master window broadcast select mask +----------------------------------- + +API currently provides no method to set or get Broadcast Select mask. Suggest +somthing like: + + int vme_master_bmsk_set (struct vme_resource *res, int mask); + int vme_master_bmsk_get (struct vme_resource *res, int *mask); + + +Interrupt Generation +-------------------- + +Add optional timeout when waiting for an IACK. + + +CR/CSR Buffer +------------- + +The VME API provides no functions to access the buffer mapped into the CR/CSR +space. + + +Mailboxes +--------- + +Whilst not part of the VME specification, they are provided by a number of +chips. They are currently not supported at all by the API. + + +Core +==== + +- Rename vme_master_resource's "pci_resource" to be bus agnostic. +- Improve generic sanity checks (Such as does an offset and size fit within a + window and parameter checking). + +Bridge Support +============== + +Tempe (tsi148) +-------------- + +- Driver can currently only support a single bridge. +- 2eSST Broadcast mode. +- Mailboxes unsupported. +- Improve error detection. +- Control of prefetch size, threshold. +- Arbiter control +- Requestor control + +Universe II (ca91c142) +---------------------- + +- Driver can currently only support a single bridge. +- DMA unsupported. +- RMW transactions unsupported. +- Location Monitors unsupported. +- Mailboxes unsupported. +- Error Detection. +- Control of prefetch size, threshold. +- Arbiter control +- Requestor control +- Slot detection + +Universe I (ca91x042) +--------------------- + +Currently completely unsupported. + diff --git a/drivers/staging/vme/bridges/Kconfig b/drivers/staging/vme/bridges/Kconfig new file mode 100644 index 0000000..023cceb --- /dev/null +++ b/drivers/staging/vme/bridges/Kconfig @@ -0,0 +1,13 @@ +comment "VME Bridge Drivers" + +config VME_CA91CX42 + tristate "Universe II" + help + If you say Y here you get support for the Tundra CA91C142 + (Universe II) VME bridge chip. + +config VME_TSI148 + tristate "Tempe" + help + If you say Y here you get support for the Tundra TSI148 VME bridge + chip. diff --git a/drivers/staging/vme/bridges/Makefile b/drivers/staging/vme/bridges/Makefile new file mode 100644 index 0000000..59638af --- /dev/null +++ b/drivers/staging/vme/bridges/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_VME_CA91CX42) += vme_ca91cx42.o +obj-$(CONFIG_VME_TSI148) += vme_tsi148.o diff --git a/drivers/staging/vme/bridges/vme_ca91cx42.c b/drivers/staging/vme/bridges/vme_ca91cx42.c new file mode 100644 index 0000000..3d2a84c --- /dev/null +++ b/drivers/staging/vme/bridges/vme_ca91cx42.c @@ -0,0 +1,1933 @@ +/* + * Support for the Tundra Universe I/II VME-PCI Bridge Chips + * + * Author: Martyn Welch <martyn.welch@gefanuc.com> + * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * + * Based on work by Tom Armistead and Ajit Prem + * Copyright 2004 Motorola Inc. + * + * Derived from ca91c042.c by Michael Wyrick + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/poll.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/uaccess.h> + +#include "../vme.h" +#include "../vme_bridge.h" +#include "vme_ca91cx42.h" + +static int __init ca91cx42_init(void); +static int ca91cx42_probe(struct pci_dev *, const struct pci_device_id *); +static void ca91cx42_remove(struct pci_dev *); +static void __exit ca91cx42_exit(void); + +struct vme_bridge *ca91cx42_bridge; +wait_queue_head_t dma_queue; +wait_queue_head_t iack_queue; +wait_queue_head_t lm_queue; +wait_queue_head_t mbox_queue; + +void (*lm_callback[4])(int); /* Called in interrupt handler, be careful! */ +void *crcsr_kernel; +dma_addr_t crcsr_bus; + +struct mutex vme_rmw; /* Only one RMW cycle at a time */ +struct mutex vme_int; /* + * Only one VME interrupt can be + * generated at a time, provide locking + */ +struct mutex vme_irq; /* Locking for VME irq callback configuration */ + + + +static char driver_name[] = "vme_ca91cx42"; + +static struct pci_device_id ca91cx42_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_TUNDRA, PCI_DEVICE_ID_TUNDRA_CA91C142) }, + { }, +}; + +static struct pci_driver ca91cx42_driver = { + .name = driver_name, + .id_table = ca91cx42_ids, + .probe = ca91cx42_probe, + .remove = ca91cx42_remove, +}; + +static u32 ca91cx42_DMA_irqhandler(void) +{ + wake_up(&dma_queue); + + return CA91CX42_LINT_DMA; +} + +static u32 ca91cx42_LM_irqhandler(u32 stat) +{ + int i; + u32 serviced = 0; + + for (i = 0; i < 4; i++) { + if (stat & CA91CX42_LINT_LM[i]) { + /* We only enable interrupts if the callback is set */ + lm_callback[i](i); + serviced |= CA91CX42_LINT_LM[i]; + } + } + + return serviced; +} + +/* XXX This needs to be split into 4 queues */ +static u32 ca91cx42_MB_irqhandler(int mbox_mask) +{ + wake_up(&mbox_queue); + + return CA91CX42_LINT_MBOX; +} + +static u32 ca91cx42_IACK_irqhandler(void) +{ + wake_up(&iack_queue); + + return CA91CX42_LINT_SW_IACK; +} + +#if 0 +int ca91cx42_bus_error_chk(int clrflag) +{ + int tmp; + tmp = ioread32(ca91cx42_bridge->base + PCI_COMMAND); + if (tmp & 0x08000000) { /* S_TA is Set */ + if (clrflag) + iowrite32(tmp | 0x08000000, + ca91cx42_bridge->base + PCI_COMMAND); + return 1; + } + return 0; +} +#endif + +static u32 ca91cx42_VERR_irqhandler(void) +{ + int val; + + val = ioread32(ca91cx42_bridge->base + DGCS); + + if (!(val & 0x00000800)) { + printk(KERN_ERR "ca91c042: ca91cx42_VERR_irqhandler DMA Read " + "Error DGCS=%08X\n", val); + } + + return CA91CX42_LINT_VERR; +} + +static u32 ca91cx42_LERR_irqhandler(void) +{ + int val; + + val = ioread32(ca91cx42_bridge->base + DGCS); + + if (!(val & 0x00000800)) { + printk(KERN_ERR "ca91c042: ca91cx42_LERR_irqhandler DMA Read " + "Error DGCS=%08X\n", val); + + } + + return CA91CX42_LINT_LERR; +} + + +static u32 ca91cx42_VIRQ_irqhandler(int stat) +{ + int vec, i, serviced = 0; + void (*call)(int, int, void *); + void *priv_data; + + for (i = 7; i > 0; i--) { + if (stat & (1 << i)) { + vec = ioread32(ca91cx42_bridge->base + + CA91CX42_V_STATID[i]) & 0xff; + + call = ca91cx42_bridge->irq[i - 1].callback[vec].func; + priv_data = + ca91cx42_bridge->irq[i - 1].callback[vec].priv_data; + + if (call != NULL) + call(i, vec, priv_data); + else + printk("Spurilous VME interrupt, level:%x, " + "vector:%x\n", i, vec); + + serviced |= (1 << i); + } + } + + return serviced; +} + +static irqreturn_t ca91cx42_irqhandler(int irq, void *dev_id) +{ + u32 stat, enable, serviced = 0; + + if (dev_id != ca91cx42_bridge->base) + return IRQ_NONE; + + enable = ioread32(ca91cx42_bridge->base + LINT_EN); + stat = ioread32(ca91cx42_bridge->base + LINT_STAT); + + /* Only look at unmasked interrupts */ + stat &= enable; + + if (unlikely(!stat)) + return IRQ_NONE; + + if (stat & CA91CX42_LINT_DMA) + serviced |= ca91cx42_DMA_irqhandler(); + if (stat & (CA91CX42_LINT_LM0 | CA91CX42_LINT_LM1 | CA91CX42_LINT_LM2 | + CA91CX42_LINT_LM3)) + serviced |= ca91cx42_LM_irqhandler(stat); + if (stat & CA91CX42_LINT_MBOX) + serviced |= ca91cx42_MB_irqhandler(stat); + if (stat & CA91CX42_LINT_SW_IACK) + serviced |= ca91cx42_IACK_irqhandler(); + if (stat & CA91CX42_LINT_VERR) + serviced |= ca91cx42_VERR_irqhandler(); + if (stat & CA91CX42_LINT_LERR) + serviced |= ca91cx42_LERR_irqhandler(); + if (stat & (CA91CX42_LINT_VIRQ1 | CA91CX42_LINT_VIRQ2 | + CA91CX42_LINT_VIRQ3 | CA91CX42_LINT_VIRQ4 | + CA91CX42_LINT_VIRQ5 | CA91CX42_LINT_VIRQ6 | + CA91CX42_LINT_VIRQ7)) + serviced |= ca91cx42_VIRQ_irqhandler(stat); + + /* Clear serviced interrupts */ + iowrite32(stat, ca91cx42_bridge->base + LINT_STAT); + + return IRQ_HANDLED; +} + +static int ca91cx42_irq_init(struct vme_bridge *bridge) +{ + int result, tmp; + struct pci_dev *pdev; + + /* Need pdev */ + pdev = container_of(bridge->parent, struct pci_dev, dev); + + /* Initialise list for VME bus errors */ + INIT_LIST_HEAD(&(bridge->vme_errors)); + + /* Disable interrupts from PCI to VME */ + iowrite32(0, bridge->base + VINT_EN); + + /* Disable PCI interrupts */ + iowrite32(0, bridge->base + LINT_EN); + /* Clear Any Pending PCI Interrupts */ + iowrite32(0x00FFFFFF, bridge->base + LINT_STAT); + + result = request_irq(pdev->irq, ca91cx42_irqhandler, IRQF_SHARED, + driver_name, pdev); + if (result) { + dev_err(&pdev->dev, "Can't get assigned pci irq vector %02X\n", + pdev->irq); + return result; + } + + /* Ensure all interrupts are mapped to PCI Interrupt 0 */ + iowrite32(0, bridge->base + LINT_MAP0); + iowrite32(0, bridge->base + LINT_MAP1); + iowrite32(0, bridge->base + LINT_MAP2); + + /* Enable DMA, mailbox & LM Interrupts */ + tmp = CA91CX42_LINT_MBOX3 | CA91CX42_LINT_MBOX2 | CA91CX42_LINT_MBOX1 | + CA91CX42_LINT_MBOX0 | CA91CX42_LINT_SW_IACK | + CA91CX42_LINT_VERR | CA91CX42_LINT_LERR | CA91CX42_LINT_DMA; + + iowrite32(tmp, bridge->base + LINT_EN); + + return 0; +} + +static void ca91cx42_irq_exit(struct pci_dev *pdev) +{ + /* Disable interrupts from PCI to VME */ + iowrite32(0, ca91cx42_bridge->base + VINT_EN); + + /* Disable PCI interrupts */ + iowrite32(0, ca91cx42_bridge->base + LINT_EN); + /* Clear Any Pending PCI Interrupts */ + iowrite32(0x00FFFFFF, ca91cx42_bridge->base + LINT_STAT); + + free_irq(pdev->irq, pdev); +} + +/* + * Set up an VME interrupt + */ +int ca91cx42_request_irq(int level, int statid, + void (*callback)(int level, int vector, void *priv_data), + void *priv_data) +{ + u32 tmp; + + mutex_lock(&(vme_irq)); + + if (ca91cx42_bridge->irq[level - 1].callback[statid].func) { + mutex_unlock(&(vme_irq)); + printk("VME Interrupt already taken\n"); + return -EBUSY; + } + + + ca91cx42_bridge->irq[level - 1].count++; + ca91cx42_bridge->irq[level - 1].callback[statid].priv_data = priv_data; + ca91cx42_bridge->irq[level - 1].callback[statid].func = callback; + + /* Enable IRQ level */ + tmp = ioread32(ca91cx42_bridge->base + LINT_EN); + tmp |= CA91CX42_LINT_VIRQ[level]; + iowrite32(tmp, ca91cx42_bridge->base + LINT_EN); + + mutex_unlock(&(vme_irq)); + + return 0; +} + +/* + * Free VME interrupt + */ +void ca91cx42_free_irq(int level, int statid) +{ + u32 tmp; + struct pci_dev *pdev; + + mutex_lock(&(vme_irq)); + + ca91cx42_bridge->irq[level - 1].count--; + + /* Disable IRQ level if no more interrupts attached at this level*/ + if (ca91cx42_bridge->irq[level - 1].count == 0) { + tmp = ioread32(ca91cx42_bridge->base + LINT_EN); + tmp &= ~CA91CX42_LINT_VIRQ[level]; + iowrite32(tmp, ca91cx42_bridge->base + LINT_EN); + + pdev = container_of(ca91cx42_bridge->parent, struct pci_dev, + dev); + + synchronize_irq(pdev->irq); + } + + ca91cx42_bridge->irq[level - 1].callback[statid].func = NULL; + ca91cx42_bridge->irq[level - 1].callback[statid].priv_data = NULL; + + mutex_unlock(&(vme_irq)); +} + +int ca91cx42_generate_irq(int level, int statid) +{ + u32 tmp; + + /* Universe can only generate even vectors */ + if (statid & 1) + return -EINVAL; + + mutex_lock(&(vme_int)); + + tmp = ioread32(ca91cx42_bridge->base + VINT_EN); + + /* Set Status/ID */ + iowrite32(statid << 24, ca91cx42_bridge->base + STATID); + + /* Assert VMEbus IRQ */ + tmp = tmp | (1 << (level + 24)); + iowrite32(tmp, ca91cx42_bridge->base + VINT_EN); + + /* Wait for IACK */ + wait_event_interruptible(iack_queue, 0); + + /* Return interrupt to low state */ + tmp = ioread32(ca91cx42_bridge->base + VINT_EN); + tmp = tmp & ~(1 << (level + 24)); + iowrite32(tmp, ca91cx42_bridge->base + VINT_EN); + + mutex_unlock(&(vme_int)); + + return 0; +} + +int ca91cx42_slave_set(struct vme_slave_resource *image, int enabled, + unsigned long long vme_base, unsigned long long size, + dma_addr_t pci_base, vme_address_t aspace, vme_cycle_t cycle) +{ + unsigned int i, addr = 0, granularity = 0; + unsigned int temp_ctl = 0; + unsigned int vme_bound, pci_offset; + + i = image->number; + + switch (aspace) { + case VME_A16: + addr |= CA91CX42_VSI_CTL_VAS_A16; + break; + case VME_A24: + addr |= CA91CX42_VSI_CTL_VAS_A24; + break; + case VME_A32: + addr |= CA91CX42_VSI_CTL_VAS_A32; + break; + case VME_USER1: + addr |= CA91CX42_VSI_CTL_VAS_USER1; + break; + case VME_USER2: + addr |= CA91CX42_VSI_CTL_VAS_USER2; + break; + case VME_A64: + case VME_CRCSR: + case VME_USER3: + case VME_USER4: + default: + printk(KERN_ERR "Invalid address space\n"); + return -EINVAL; + break; + } + + /* + * Bound address is a valid address for the window, adjust + * accordingly + */ + vme_bound = vme_base + size - granularity; + pci_offset = pci_base - vme_base; + + /* XXX Need to check that vme_base, vme_bound and pci_offset aren't + * too big for registers + */ + + if ((i == 0) || (i == 4)) + granularity = 0x1000; + else + granularity = 0x10000; + + if (vme_base & (granularity - 1)) { + printk(KERN_ERR "Invalid VME base alignment\n"); + return -EINVAL; + } + if (vme_bound & (granularity - 1)) { + printk(KERN_ERR "Invalid VME bound alignment\n"); + return -EINVAL; + } + if (pci_offset & (granularity - 1)) { + printk(KERN_ERR "Invalid PCI Offset alignment\n"); + return -EINVAL; + } + + /* Disable while we are mucking around */ + temp_ctl = ioread32(ca91cx42_bridge->base + CA91CX42_VSI_CTL[i]); + temp_ctl &= ~CA91CX42_VSI_CTL_EN; + iowrite32(temp_ctl, ca91cx42_bridge->base + CA91CX42_VSI_CTL[i]); + + /* Setup mapping */ + iowrite32(vme_base, ca91cx42_bridge->base + CA91CX42_VSI_BS[i]); + iowrite32(vme_bound, ca91cx42_bridge->base + CA91CX42_VSI_BD[i]); + iowrite32(pci_offset, ca91cx42_bridge->base + CA91CX42_VSI_TO[i]); + +/* XXX Prefetch stuff currently unsupported */ +#if 0 + if (vmeIn->wrPostEnable) + temp_ctl |= CA91CX42_VSI_CTL_PWEN; + if (vmeIn->prefetchEnable) + temp_ctl |= CA91CX42_VSI_CTL_PREN; + if (vmeIn->rmwLock) + temp_ctl |= CA91CX42_VSI_CTL_LLRMW; + if (vmeIn->data64BitCapable) + temp_ctl |= CA91CX42_VSI_CTL_LD64EN; +#endif + + /* Setup address space */ + temp_ctl &= ~CA91CX42_VSI_CTL_VAS_M; + temp_ctl |= addr; + + /* Setup cycle types */ + temp_ctl &= ~(CA91CX42_VSI_CTL_PGM_M | CA91CX42_VSI_CTL_SUPER_M); + if (cycle & VME_SUPER) + temp_ctl |= CA91CX42_VSI_CTL_SUPER_SUPR; + if (cycle & VME_USER) + temp_ctl |= CA91CX42_VSI_CTL_SUPER_NPRIV; + if (cycle & VME_PROG) + temp_ctl |= CA91CX42_VSI_CTL_PGM_PGM; + if (cycle & VME_DATA) + temp_ctl |= CA91CX42_VSI_CTL_PGM_DATA; + + /* Write ctl reg without enable */ + iowrite32(temp_ctl, ca91cx42_bridge->base + CA91CX42_VSI_CTL[i]); + + if (enabled) + temp_ctl |= CA91CX42_VSI_CTL_EN; + + iowrite32(temp_ctl, ca91cx42_bridge->base + CA91CX42_VSI_CTL[i]); + + return 0; +} + +int ca91cx42_slave_get(struct vme_slave_resource *image, int *enabled, + unsigned long long *vme_base, unsigned long long *size, + dma_addr_t *pci_base, vme_address_t *aspace, vme_cycle_t *cycle) +{ + unsigned int i, granularity = 0, ctl = 0; + unsigned long long vme_bound, pci_offset; + + i = image->number; + + if ((i == 0) || (i == 4)) + granularity = 0x1000; + else + granularity = 0x10000; + + /* Read Registers */ + ctl = ioread32(ca91cx42_bridge->base + CA91CX42_VSI_CTL[i]); + + *vme_base = ioread32(ca91cx42_bridge->base + CA91CX42_VSI_BS[i]); + vme_bound = ioread32(ca91cx42_bridge->base + CA91CX42_VSI_BD[i]); + pci_offset = ioread32(ca91cx42_bridge->base + CA91CX42_VSI_TO[i]); + + *pci_base = (dma_addr_t)vme_base + pci_offset; + *size = (unsigned long long)((vme_bound - *vme_base) + granularity); + + *enabled = 0; + *aspace = 0; + *cycle = 0; + + if (ctl & CA91CX42_VSI_CTL_EN) + *enabled = 1; + + if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_A16) + *aspace = VME_A16; + if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_A24) + *aspace = VME_A24; + if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_A32) + *aspace = VME_A32; + if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_USER1) + *aspace = VME_USER1; + if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_USER2) + *aspace = VME_USER2; + + if (ctl & CA91CX42_VSI_CTL_SUPER_SUPR) + *cycle |= VME_SUPER; + if (ctl & CA91CX42_VSI_CTL_SUPER_NPRIV) + *cycle |= VME_USER; + if (ctl & CA91CX42_VSI_CTL_PGM_PGM) + *cycle |= VME_PROG; + if (ctl & CA91CX42_VSI_CTL_PGM_DATA) + *cycle |= VME_DATA; + + return 0; +} + +/* + * Allocate and map PCI Resource + */ +static int ca91cx42_alloc_resource(struct vme_master_resource *image, + unsigned long long size) +{ + unsigned long long existing_size; + int retval = 0; + struct pci_dev *pdev; + + /* Find pci_dev container of dev */ + if (ca91cx42_bridge->parent == NULL) { + printk(KERN_ERR "Dev entry NULL\n"); + return -EINVAL; + } + pdev = container_of(ca91cx42_bridge->parent, struct pci_dev, dev); + + existing_size = (unsigned long long)(image->pci_resource.end - + image->pci_resource.start); + + /* If the existing size is OK, return */ + if (existing_size == (size - 1)) + return 0; + + if (existing_size != 0) { + iounmap(image->kern_base); + image->kern_base = NULL; + if (image->pci_resource.name != NULL) + kfree(image->pci_resource.name); + release_resource(&(image->pci_resource)); + memset(&(image->pci_resource), 0, sizeof(struct resource)); + } + + if (image->pci_resource.name == NULL) { + image->pci_resource.name = kmalloc(VMENAMSIZ+3, GFP_KERNEL); + if (image->pci_resource.name == NULL) { + printk(KERN_ERR "Unable to allocate memory for resource" + " name\n"); + retval = -ENOMEM; + goto err_name; + } + } + + sprintf((char *)image->pci_resource.name, "%s.%d", + ca91cx42_bridge->name, image->number); + + image->pci_resource.start = 0; + image->pci_resource.end = (unsigned long)size; + image->pci_resource.flags = IORESOURCE_MEM; + + retval = pci_bus_alloc_resource(pdev->bus, + &(image->pci_resource), size, size, PCIBIOS_MIN_MEM, + 0, NULL, NULL); + if (retval) { + printk(KERN_ERR "Failed to allocate mem resource for " + "window %d size 0x%lx start 0x%lx\n", + image->number, (unsigned long)size, + (unsigned long)image->pci_resource.start); + goto err_resource; + } + + image->kern_base = ioremap_nocache( + image->pci_resource.start, size); + if (image->kern_base == NULL) { + printk(KERN_ERR "Failed to remap resource\n"); + retval = -ENOMEM; + goto err_remap; + } + + return 0; + + iounmap(image->kern_base); + image->kern_base = NULL; +err_remap: + release_resource(&(image->pci_resource)); +err_resource: + kfree(image->pci_resource.name); + memset(&(image->pci_resource), 0, sizeof(struct resource)); +err_name: + return retval; +} + +/* + * * Free and unmap PCI Resource + * */ +static void ca91cx42_free_resource(struct vme_master_resource *image) +{ + iounmap(image->kern_base); + image->kern_base = NULL; + release_resource(&(image->pci_resource)); + kfree(image->pci_resource.name); + memset(&(image->pci_resource), 0, sizeof(struct resource)); +} + + +int ca91cx42_master_set(struct vme_master_resource *image, int enabled, + unsigned long long vme_base, unsigned long long size, + vme_address_t aspace, vme_cycle_t cycle, vme_width_t dwidth) +{ + int retval = 0; + unsigned int i; + unsigned int temp_ctl = 0; + unsigned long long pci_bound, vme_offset, pci_base; + + /* Verify input data */ + if (vme_base & 0xFFF) { + printk(KERN_ERR "Invalid VME Window alignment\n"); + retval = -EINVAL; + goto err_window; + } + if (size & 0xFFF) { + printk(KERN_ERR "Invalid VME Window alignment\n"); + retval = -EINVAL; + goto err_window; + } + + spin_lock(&(image->lock)); + + /* XXX We should do this much later, so that we can exit without + * needing to redo the mapping... + */ + /* + * Let's allocate the resource here rather than further up the stack as + * it avoids pushing loads of bus dependant stuff up the stack + */ + retval = ca91cx42_alloc_resource(image, size); + if (retval) { + spin_unlock(&(image->lock)); + printk(KERN_ERR "Unable to allocate memory for resource " + "name\n"); + retval = -ENOMEM; + goto err_res; + } + + pci_base = (unsigned long long)image->pci_resource.start; + + /* + * Bound address is a valid address for the window, adjust + * according to window granularity. + */ + pci_bound = pci_base + (size - 0x1000); + vme_offset = vme_base - pci_base; + + i = image->number; + + /* Disable while we are mucking around */ + temp_ctl = ioread32(ca91cx42_bridge->base + CA91CX42_LSI_CTL[i]); + temp_ctl &= ~CA91CX42_LSI_CTL_EN; + iowrite32(temp_ctl, ca91cx42_bridge->base + CA91CX42_LSI_CTL[i]); + +/* XXX Prefetch stuff currently unsupported */ +#if 0 + if (vmeOut->wrPostEnable) + temp_ctl |= 0x40000000; +#endif + + /* Setup cycle types */ + temp_ctl &= ~CA91CX42_LSI_CTL_VCT_M; + if (cycle & VME_BLT) + temp_ctl |= CA91CX42_LSI_CTL_VCT_BLT; + if (cycle & VME_MBLT) + temp_ctl |= CA91CX42_LSI_CTL_VCT_MBLT; + + /* Setup data width */ + temp_ctl &= ~CA91CX42_LSI_CTL_VDW_M; + switch (dwidth) { + case VME_D8: + temp_ctl |= CA91CX42_LSI_CTL_VDW_D8; + break; + case VME_D16: + temp_ctl |= CA91CX42_LSI_CTL_VDW_D16; + break; + case VME_D32: + temp_ctl |= CA91CX42_LSI_CTL_VDW_D32; + break; + case VME_D64: + temp_ctl |= CA91CX42_LSI_CTL_VDW_D64; + break; + default: + spin_unlock(&(image->lock)); + printk(KERN_ERR "Invalid data width\n"); + retval = -EINVAL; + goto err_dwidth; + break; + } + + /* Setup address space */ + temp_ctl &= ~CA91CX42_LSI_CTL_VAS_M; + switch (aspace) { + case VME_A16: + temp_ctl |= CA91CX42_LSI_CTL_VAS_A16; + break; + case VME_A24: + temp_ctl |= CA91CX42_LSI_CTL_VAS_A24; + break; + case VME_A32: + temp_ctl |= CA91CX42_LSI_CTL_VAS_A32; + break; + case VME_CRCSR: + temp_ctl |= CA91CX42_LSI_CTL_VAS_CRCSR; + break; + case VME_USER1: + temp_ctl |= CA91CX42_LSI_CTL_VAS_USER1; + break; + case VME_USER2: + temp_ctl |= CA91CX42_LSI_CTL_VAS_USER2; + break; + case VME_A64: + case VME_USER3: + case VME_USER4: + default: + spin_unlock(&(image->lock)); + printk(KERN_ERR "Invalid address space\n"); + retval = -EINVAL; + goto err_aspace; + break; + } + + temp_ctl &= ~(CA91CX42_LSI_CTL_PGM_M | CA91CX42_LSI_CTL_SUPER_M); + if (cycle & VME_SUPER) + temp_ctl |= CA91CX42_LSI_CTL_SUPER_SUPR; + if (cycle & VME_PROG) + temp_ctl |= CA91CX42_LSI_CTL_PGM_PGM; + + /* Setup mapping */ + iowrite32(pci_base, ca91cx42_bridge->base + CA91CX42_LSI_BS[i]); + iowrite32(pci_bound, ca91cx42_bridge->base + CA91CX42_LSI_BD[i]); + iowrite32(vme_offset, ca91cx42_bridge->base + CA91CX42_LSI_TO[i]); + + /* Write ctl reg without enable */ + iowrite32(temp_ctl, ca91cx42_bridge->base + CA91CX42_LSI_CTL[i]); + + if (enabled) + temp_ctl |= CA91CX42_LSI_CTL_EN; + + iowrite32(temp_ctl, ca91cx42_bridge->base + CA91CX42_LSI_CTL[i]); + + spin_unlock(&(image->lock)); + return 0; + +err_aspace: +err_dwidth: + ca91cx42_free_resource(image); +err_res: +err_window: + return retval; +} + +int __ca91cx42_master_get(struct vme_master_resource *image, int *enabled, + unsigned long long *vme_base, unsigned long long *size, + vme_address_t *aspace, vme_cycle_t *cycle, vme_width_t *dwidth) +{ + unsigned int i, ctl; + unsigned long long pci_base, pci_bound, vme_offset; + + i = image->number; + + ctl = ioread32(ca91cx42_bridge->base + CA91CX42_LSI_CTL[i]); + + pci_base = ioread32(ca91cx42_bridge->base + CA91CX42_LSI_BS[i]); + vme_offset = ioread32(ca91cx42_bridge->base + CA91CX42_LSI_TO[i]); + pci_bound = ioread32(ca91cx42_bridge->base + CA91CX42_LSI_BD[i]); + + *vme_base = pci_base + vme_offset; + *size = (pci_bound - pci_base) + 0x1000; + + *enabled = 0; + *aspace = 0; + *cycle = 0; + *dwidth = 0; + + if (ctl & CA91CX42_LSI_CTL_EN) + *enabled = 1; + + /* Setup address space */ + switch (ctl & CA91CX42_LSI_CTL_VAS_M) { + case CA91CX42_LSI_CTL_VAS_A16: + *aspace = VME_A16; + break; + case CA91CX42_LSI_CTL_VAS_A24: + *aspace = VME_A24; + break; + case CA91CX42_LSI_CTL_VAS_A32: + *aspace = VME_A32; + break; + case CA91CX42_LSI_CTL_VAS_CRCSR: + *aspace = VME_CRCSR; + break; + case CA91CX42_LSI_CTL_VAS_USER1: + *aspace = VME_USER1; + break; + case CA91CX42_LSI_CTL_VAS_USER2: + *aspace = VME_USER2; + break; + } + + /* XXX Not sure howto check for MBLT */ + /* Setup cycle types */ + if (ctl & CA91CX42_LSI_CTL_VCT_BLT) + *cycle |= VME_BLT; + else + *cycle |= VME_SCT; + + if (ctl & CA91CX42_LSI_CTL_SUPER_SUPR) + *cycle |= VME_SUPER; + else + *cycle |= VME_USER; + + if (ctl & CA91CX42_LSI_CTL_PGM_PGM) + *cycle = VME_PROG; + else + *cycle = VME_DATA; + + /* Setup data width */ + switch (ctl & CA91CX42_LSI_CTL_VDW_M) { + case CA91CX42_LSI_CTL_VDW_D8: + *dwidth = VME_D8; + break; + case CA91CX42_LSI_CTL_VDW_D16: + *dwidth = VME_D16; + break; + case CA91CX42_LSI_CTL_VDW_D32: + *dwidth = VME_D32; + break; + case CA91CX42_LSI_CTL_VDW_D64: + *dwidth = VME_D64; + break; + } + +/* XXX Prefetch stuff currently unsupported */ +#if 0 + if (ctl & 0x40000000) + vmeOut->wrPostEnable = 1; +#endif + + return 0; +} + +int ca91cx42_master_get(struct vme_master_resource *image, int *enabled, + unsigned long long *vme_base, unsigned long long *size, + vme_address_t *aspace, vme_cycle_t *cycle, vme_width_t *dwidth) +{ + int retval; + + spin_lock(&(image->lock)); + + retval = __ca91cx42_master_get(image, enabled, vme_base, size, aspace, + cycle, dwidth); + + spin_unlock(&(image->lock)); + + return retval; +} + +ssize_t ca91cx42_master_read(struct vme_master_resource *image, void *buf, + size_t count, loff_t offset) +{ + int retval; + + spin_lock(&(image->lock)); + + memcpy_fromio(buf, image->kern_base + offset, (unsigned int)count); + retval = count; + + spin_unlock(&(image->lock)); + + return retval; +} + +ssize_t ca91cx42_master_write(struct vme_master_resource *image, void *buf, + size_t count, loff_t offset) +{ + int retval = 0; + + spin_lock(&(image->lock)); + + memcpy_toio(image->kern_base + offset, buf, (unsigned int)count); + retval = count; + + spin_unlock(&(image->lock)); + + return retval; +} + +int ca91cx42_slot_get(void) +{ + u32 slot = 0; + + slot = ioread32(ca91cx42_bridge->base + VCSR_BS); + slot = ((slot & CA91CX42_VCSR_BS_SLOT_M) >> 27); + return (int)slot; + +} + +static int __init ca91cx42_init(void) +{ + return pci_register_driver(&ca91cx42_driver); +} + +/* + * Configure CR/CSR space + * + * Access to the CR/CSR can be configured at power-up. The location of the + * CR/CSR registers in the CR/CSR address space is determined by the boards + * Auto-ID or Geographic address. This function ensures that the window is + * enabled at an offset consistent with the boards geopgraphic address. + */ +static int ca91cx42_crcsr_init(struct pci_dev *pdev) +{ + unsigned int crcsr_addr; + int tmp, slot; + +/* XXX We may need to set this somehow as the Universe II does not support + * geographical addressing. + */ +#if 0 + if (vme_slotnum != -1) + iowrite32(vme_slotnum << 27, ca91cx42_bridge->base + VCSR_BS); +#endif + slot = ca91cx42_slot_get(); + dev_info(&pdev->dev, "CR/CSR Offset: %d\n", slot); + if (slot == 0) { + dev_err(&pdev->dev, "Slot number is unset, not configuring " + "CR/CSR space\n"); + return -EINVAL; + } + + /* Allocate mem for CR/CSR image */ + crcsr_kernel = pci_alloc_consistent(pdev, VME_CRCSR_BUF_SIZE, + &crcsr_bus); + if (crcsr_kernel == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for CR/CSR " + "image\n"); + return -ENOMEM; + } + + memset(crcsr_kernel, 0, VME_CRCSR_BUF_SIZE); + + crcsr_addr = slot * (512 * 1024); + iowrite32(crcsr_bus - crcsr_addr, ca91cx42_bridge->base + VCSR_TO); + + tmp = ioread32(ca91cx42_bridge->base + VCSR_CTL); + tmp |= CA91CX42_VCSR_CTL_EN; + iowrite32(tmp, ca91cx42_bridge->base + VCSR_CTL); + + return 0; +} + +static void ca91cx42_crcsr_exit(struct pci_dev *pdev) +{ + u32 tmp; + + /* Turn off CR/CSR space */ + tmp = ioread32(ca91cx42_bridge->base + VCSR_CTL); + tmp &= ~CA91CX42_VCSR_CTL_EN; + iowrite32(tmp, ca91cx42_bridge->base + VCSR_CTL); + + /* Free image */ + iowrite32(0, ca91cx42_bridge->base + VCSR_TO); + + pci_free_consistent(pdev, VME_CRCSR_BUF_SIZE, crcsr_kernel, crcsr_bus); +} + +static int ca91cx42_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + int retval, i; + u32 data; + struct list_head *pos = NULL; + struct vme_master_resource *master_image; + struct vme_slave_resource *slave_image; +#if 0 + struct vme_dma_resource *dma_ctrlr; +#endif + struct vme_lm_resource *lm; + + /* We want to support more than one of each bridge so we need to + * dynamically allocate the bridge structure + */ + ca91cx42_bridge = kmalloc(sizeof(struct vme_bridge), GFP_KERNEL); + + if (ca91cx42_bridge == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for device " + "structure\n"); + retval = -ENOMEM; + goto err_struct; + } + + memset(ca91cx42_bridge, 0, sizeof(struct vme_bridge)); + + /* Enable the device */ + retval = pci_enable_device(pdev); + if (retval) { + dev_err(&pdev->dev, "Unable to enable device\n"); + goto err_enable; + } + + /* Map Registers */ + retval = pci_request_regions(pdev, driver_name); + if (retval) { + dev_err(&pdev->dev, "Unable to reserve resources\n"); + goto err_resource; + } + + /* map registers in BAR 0 */ + ca91cx42_bridge->base = ioremap_nocache(pci_resource_start(pdev, 0), + 4096); + if (!ca91cx42_bridge->base) { + dev_err(&pdev->dev, "Unable to remap CRG region\n"); + retval = -EIO; + goto err_remap; + } + + /* Check to see if the mapping worked out */ + data = ioread32(ca91cx42_bridge->base + CA91CX42_PCI_ID) & 0x0000FFFF; + if (data != PCI_VENDOR_ID_TUNDRA) { + dev_err(&pdev->dev, "PCI_ID check failed\n"); + retval = -EIO; + goto err_test; + } + + /* Initialize wait queues & mutual exclusion flags */ + /* XXX These need to be moved to the vme_bridge structure */ + init_waitqueue_head(&dma_queue); + init_waitqueue_head(&iack_queue); + mutex_init(&(vme_int)); + mutex_init(&(vme_irq)); + mutex_init(&(vme_rmw)); + + ca91cx42_bridge->parent = &(pdev->dev); + strcpy(ca91cx42_bridge->name, driver_name); + + /* Setup IRQ */ + retval = ca91cx42_irq_init(ca91cx42_bridge); + if (retval != 0) { + dev_err(&pdev->dev, "Chip Initialization failed.\n"); + goto err_irq; + } + + /* Add master windows to list */ + INIT_LIST_HEAD(&(ca91cx42_bridge->master_resources)); + for (i = 0; i < CA91C142_MAX_MASTER; i++) { + master_image = kmalloc(sizeof(struct vme_master_resource), + GFP_KERNEL); + if (master_image == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "master resource structure\n"); + retval = -ENOMEM; + goto err_master; + } + master_image->parent = ca91cx42_bridge; + spin_lock_init(&(master_image->lock)); + master_image->locked = 0; + master_image->number = i; + master_image->address_attr = VME_A16 | VME_A24 | VME_A32 | + VME_CRCSR | VME_USER1 | VME_USER2; + master_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | + VME_SUPER | VME_USER | VME_PROG | VME_DATA; + master_image->width_attr = VME_D8 | VME_D16 | VME_D32 | VME_D64; + memset(&(master_image->pci_resource), 0, + sizeof(struct resource)); + master_image->kern_base = NULL; + list_add_tail(&(master_image->list), + &(ca91cx42_bridge->master_resources)); + } + + /* Add slave windows to list */ + INIT_LIST_HEAD(&(ca91cx42_bridge->slave_resources)); + for (i = 0; i < CA91C142_MAX_SLAVE; i++) { + slave_image = kmalloc(sizeof(struct vme_slave_resource), + GFP_KERNEL); + if (slave_image == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "slave resource structure\n"); + retval = -ENOMEM; + goto err_slave; + } + slave_image->parent = ca91cx42_bridge; + mutex_init(&(slave_image->mtx)); + slave_image->locked = 0; + slave_image->number = i; + slave_image->address_attr = VME_A24 | VME_A32 | VME_USER1 | + VME_USER2; + + /* Only windows 0 and 4 support A16 */ + if (i == 0 || i == 4) + slave_image->address_attr |= VME_A16; + + slave_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | + VME_SUPER | VME_USER | VME_PROG | VME_DATA; + list_add_tail(&(slave_image->list), + &(ca91cx42_bridge->slave_resources)); + } +#if 0 + /* Add dma engines to list */ + INIT_LIST_HEAD(&(ca91cx42_bridge->dma_resources)); + for (i = 0; i < CA91C142_MAX_DMA; i++) { + dma_ctrlr = kmalloc(sizeof(struct vme_dma_resource), + GFP_KERNEL); + if (dma_ctrlr == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "dma resource structure\n"); + retval = -ENOMEM; + goto err_dma; + } + dma_ctrlr->parent = ca91cx42_bridge; + mutex_init(&(dma_ctrlr->mtx)); + dma_ctrlr->locked = 0; + dma_ctrlr->number = i; + INIT_LIST_HEAD(&(dma_ctrlr->pending)); + INIT_LIST_HEAD(&(dma_ctrlr->running)); + list_add_tail(&(dma_ctrlr->list), + &(ca91cx42_bridge->dma_resources)); + } +#endif + /* Add location monitor to list */ + INIT_LIST_HEAD(&(ca91cx42_bridge->lm_resources)); + lm = kmalloc(sizeof(struct vme_lm_resource), GFP_KERNEL); + if (lm == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "location monitor resource structure\n"); + retval = -ENOMEM; + goto err_lm; + } + lm->parent = ca91cx42_bridge; + mutex_init(&(lm->mtx)); + lm->locked = 0; + lm->number = 1; + lm->monitors = 4; + list_add_tail(&(lm->list), &(ca91cx42_bridge->lm_resources)); + + ca91cx42_bridge->slave_get = ca91cx42_slave_get; + ca91cx42_bridge->slave_set = ca91cx42_slave_set; + ca91cx42_bridge->master_get = ca91cx42_master_get; + ca91cx42_bridge->master_set = ca91cx42_master_set; + ca91cx42_bridge->master_read = ca91cx42_master_read; + ca91cx42_bridge->master_write = ca91cx42_master_write; +#if 0 + ca91cx42_bridge->master_rmw = ca91cx42_master_rmw; + ca91cx42_bridge->dma_list_add = ca91cx42_dma_list_add; + ca91cx42_bridge->dma_list_exec = ca91cx42_dma_list_exec; + ca91cx42_bridge->dma_list_empty = ca91cx42_dma_list_empty; +#endif + ca91cx42_bridge->request_irq = ca91cx42_request_irq; + ca91cx42_bridge->free_irq = ca91cx42_free_irq; + ca91cx42_bridge->generate_irq = ca91cx42_generate_irq; +#if 0 + ca91cx42_bridge->lm_set = ca91cx42_lm_set; + ca91cx42_bridge->lm_get = ca91cx42_lm_get; + ca91cx42_bridge->lm_attach = ca91cx42_lm_attach; + ca91cx42_bridge->lm_detach = ca91cx42_lm_detach; +#endif + ca91cx42_bridge->slot_get = ca91cx42_slot_get; + + data = ioread32(ca91cx42_bridge->base + MISC_CTL); + dev_info(&pdev->dev, "Board is%s the VME system controller\n", + (data & CA91CX42_MISC_CTL_SYSCON) ? "" : " not"); + dev_info(&pdev->dev, "Slot ID is %d\n", ca91cx42_slot_get()); + + if (ca91cx42_crcsr_init(pdev)) { + dev_err(&pdev->dev, "CR/CSR configuration failed.\n"); + retval = -EINVAL; +#if 0 + goto err_crcsr; +#endif + } + + /* Need to save ca91cx42_bridge pointer locally in link list for use in + * ca91cx42_remove() + */ + retval = vme_register_bridge(ca91cx42_bridge); + if (retval != 0) { + dev_err(&pdev->dev, "Chip Registration failed.\n"); + goto err_reg; + } + + return 0; + + vme_unregister_bridge(ca91cx42_bridge); +err_reg: + ca91cx42_crcsr_exit(pdev); +err_crcsr: +err_lm: + /* resources are stored in link list */ + list_for_each(pos, &(ca91cx42_bridge->lm_resources)) { + lm = list_entry(pos, struct vme_lm_resource, list); + list_del(pos); + kfree(lm); + } +#if 0 +err_dma: + /* resources are stored in link list */ + list_for_each(pos, &(ca91cx42_bridge->dma_resources)) { + dma_ctrlr = list_entry(pos, struct vme_dma_resource, list); + list_del(pos); + kfree(dma_ctrlr); + } +#endif +err_slave: + /* resources are stored in link list */ + list_for_each(pos, &(ca91cx42_bridge->slave_resources)) { + slave_image = list_entry(pos, struct vme_slave_resource, list); + list_del(pos); + kfree(slave_image); + } +err_master: + /* resources are stored in link list */ + list_for_each(pos, &(ca91cx42_bridge->master_resources)) { + master_image = list_entry(pos, struct vme_master_resource, + list); + list_del(pos); + kfree(master_image); + } + + ca91cx42_irq_exit(pdev); +err_irq: +err_test: + iounmap(ca91cx42_bridge->base); +err_remap: + pci_release_regions(pdev); +err_resource: + pci_disable_device(pdev); +err_enable: + kfree(ca91cx42_bridge); +err_struct: + return retval; + +} + +void ca91cx42_remove(struct pci_dev *pdev) +{ + struct list_head *pos = NULL; + struct vme_master_resource *master_image; + struct vme_slave_resource *slave_image; + struct vme_dma_resource *dma_ctrlr; + struct vme_lm_resource *lm; + int i; + + /* Turn off Ints */ + iowrite32(0, ca91cx42_bridge->base + LINT_EN); + + /* Turn off the windows */ + iowrite32(0x00800000, ca91cx42_bridge->base + LSI0_CTL); + iowrite32(0x00800000, ca91cx42_bridge->base + LSI1_CTL); + iowrite32(0x00800000, ca91cx42_bridge->base + LSI2_CTL); + iowrite32(0x00800000, ca91cx42_bridge->base + LSI3_CTL); + iowrite32(0x00800000, ca91cx42_bridge->base + LSI4_CTL); + iowrite32(0x00800000, ca91cx42_bridge->base + LSI5_CTL); + iowrite32(0x00800000, ca91cx42_bridge->base + LSI6_CTL); + iowrite32(0x00800000, ca91cx42_bridge->base + LSI7_CTL); + iowrite32(0x00F00000, ca91cx42_bridge->base + VSI0_CTL); + iowrite32(0x00F00000, ca91cx42_bridge->base + VSI1_CTL); + iowrite32(0x00F00000, ca91cx42_bridge->base + VSI2_CTL); + iowrite32(0x00F00000, ca91cx42_bridge->base + VSI3_CTL); + iowrite32(0x00F00000, ca91cx42_bridge->base + VSI4_CTL); + iowrite32(0x00F00000, ca91cx42_bridge->base + VSI5_CTL); + iowrite32(0x00F00000, ca91cx42_bridge->base + VSI6_CTL); + iowrite32(0x00F00000, ca91cx42_bridge->base + VSI7_CTL); + + vme_unregister_bridge(ca91cx42_bridge); +#if 0 + ca91cx42_crcsr_exit(pdev); +#endif + /* resources are stored in link list */ + list_for_each(pos, &(ca91cx42_bridge->lm_resources)) { + lm = list_entry(pos, struct vme_lm_resource, list); + list_del(pos); + kfree(lm); + } + + /* resources are stored in link list */ + list_for_each(pos, &(ca91cx42_bridge->dma_resources)) { + dma_ctrlr = list_entry(pos, struct vme_dma_resource, list); + list_del(pos); + kfree(dma_ctrlr); + } + + /* resources are stored in link list */ + list_for_each(pos, &(ca91cx42_bridge->slave_resources)) { + slave_image = list_entry(pos, struct vme_slave_resource, list); + list_del(pos); + kfree(slave_image); + } + + /* resources are stored in link list */ + list_for_each(pos, &(ca91cx42_bridge->master_resources)) { + master_image = list_entry(pos, struct vme_master_resource, + list); + list_del(pos); + kfree(master_image); + } + + ca91cx42_irq_exit(pdev); + + iounmap(ca91cx42_bridge->base); + + pci_release_regions(pdev); + + pci_disable_device(pdev); + + kfree(ca91cx42_bridge); +} + +static void __exit ca91cx42_exit(void) +{ + pci_unregister_driver(&ca91cx42_driver); +} + +MODULE_DESCRIPTION("VME driver for the Tundra Universe II VME bridge"); +MODULE_LICENSE("GPL"); + +module_init(ca91cx42_init); +module_exit(ca91cx42_exit); + +/*---------------------------------------------------------------------------- + * STAGING + *--------------------------------------------------------------------------*/ + +#if 0 +#define SWIZZLE(X) ( ((X & 0xFF000000) >> 24) | ((X & 0x00FF0000) >> 8) | ((X & 0x0000FF00) << 8) | ((X & 0x000000FF) << 24)) + +int ca91cx42_master_rmw(vmeRmwCfg_t *vmeRmw) +{ + int temp_ctl = 0; + int tempBS = 0; + int tempBD = 0; + int tempTO = 0; + int vmeBS = 0; + int vmeBD = 0; + int *rmw_pci_data_ptr = NULL; + int *vaDataPtr = NULL; + int i; + vmeOutWindowCfg_t vmeOut; + if (vmeRmw->maxAttempts < 1) { + return -EINVAL; + } + if (vmeRmw->targetAddrU) { + return -EINVAL; + } + /* Find the PCI address that maps to the desired VME address */ + for (i = 0; i < 8; i++) { + temp_ctl = ioread32(ca91cx42_bridge->base + + CA91CX42_LSI_CTL[i]); + if ((temp_ctl & 0x80000000) == 0) { + continue; + } + memset(&vmeOut, 0, sizeof(vmeOut)); + vmeOut.windowNbr = i; + ca91cx42_get_out_bound(&vmeOut); + if (vmeOut.addrSpace != vmeRmw->addrSpace) { + continue; + } + tempBS = ioread32(ca91cx42_bridge->base + CA91CX42_LSI_BS[i]); + tempBD = ioread32(ca91cx42_bridge->base + CA91CX42_LSI_BD[i]); + tempTO = ioread32(ca91cx42_bridge->base + CA91CX42_LSI_TO[i]); + vmeBS = tempBS + tempTO; + vmeBD = tempBD + tempTO; + if ((vmeRmw->targetAddr >= vmeBS) && + (vmeRmw->targetAddr < vmeBD)) { + rmw_pci_data_ptr = + (int *)(tempBS + (vmeRmw->targetAddr - vmeBS)); + vaDataPtr = + (int *)(out_image_va[i] + + (vmeRmw->targetAddr - vmeBS)); + break; + } + } + + /* If no window - fail. */ + if (rmw_pci_data_ptr == NULL) { + return -EINVAL; + } + /* Setup the RMW registers. */ + iowrite32(0, ca91cx42_bridge->base + SCYC_CTL); + iowrite32(SWIZZLE(vmeRmw->enableMask), ca91cx42_bridge->base + SCYC_EN); + iowrite32(SWIZZLE(vmeRmw->compareData), ca91cx42_bridge->base + + SCYC_CMP); + iowrite32(SWIZZLE(vmeRmw->swapData), ca91cx42_bridge->base + SCYC_SWP); + iowrite32((int)rmw_pci_data_ptr, ca91cx42_bridge->base + SCYC_ADDR); + iowrite32(1, ca91cx42_bridge->base + SCYC_CTL); + + /* Run the RMW cycle until either success or max attempts. */ + vmeRmw->numAttempts = 1; + while (vmeRmw->numAttempts <= vmeRmw->maxAttempts) { + + if ((ioread32(vaDataPtr) & vmeRmw->enableMask) == + (vmeRmw->swapData & vmeRmw->enableMask)) { + + iowrite32(0, ca91cx42_bridge->base + SCYC_CTL); + break; + + } + vmeRmw->numAttempts++; + } + + /* If no success, set num Attempts to be greater than max attempts */ + if (vmeRmw->numAttempts > vmeRmw->maxAttempts) { + vmeRmw->numAttempts = vmeRmw->maxAttempts + 1; + } + + return 0; +} + +int uniSetupDctlReg(vmeDmaPacket_t * vmeDma, int *dctlregreturn) +{ + unsigned int dctlreg = 0x80; + struct vmeAttr *vmeAttr; + + if (vmeDma->srcBus == VME_DMA_VME) { + dctlreg = 0; + vmeAttr = &vmeDma->srcVmeAttr; + } else { + dctlreg = 0x80000000; + vmeAttr = &vmeDma->dstVmeAttr; + } + + switch (vmeAttr->maxDataWidth) { + case VME_D8: + break; + case VME_D16: + dctlreg |= 0x00400000; + break; + case VME_D32: + dctlreg |= 0x00800000; + break; + case VME_D64: + dctlreg |= 0x00C00000; + break; + } + + switch (vmeAttr->addrSpace) { + case VME_A16: + break; + case VME_A24: + dctlreg |= 0x00010000; + break; + case VME_A32: + dctlreg |= 0x00020000; + break; + case VME_USER1: + dctlreg |= 0x00060000; + break; + case VME_USER2: + dctlreg |= 0x00070000; + break; + + case VME_A64: /* not supported in Universe DMA */ + case VME_CRCSR: + case VME_USER3: + case VME_USER4: + return -EINVAL; + break; + } + if (vmeAttr->userAccessType == VME_PROG) { + dctlreg |= 0x00004000; + } + if (vmeAttr->dataAccessType == VME_SUPER) { + dctlreg |= 0x00001000; + } + if (vmeAttr->xferProtocol != VME_SCT) { + dctlreg |= 0x00000100; + } + *dctlregreturn = dctlreg; + return 0; +} + +unsigned int +ca91cx42_start_dma(int channel, unsigned int dgcsreg, TDMA_Cmd_Packet *vmeLL) +{ + unsigned int val; + + /* Setup registers as needed for direct or chained. */ + if (dgcsreg & 0x8000000) { + iowrite32(0, ca91cx42_bridge->base + DTBC); + iowrite32((unsigned int)vmeLL, ca91cx42_bridge->base + DCPP); + } else { +#if 0 + printk(KERN_ERR "Starting: DGCS = %08x\n", dgcsreg); + printk(KERN_ERR "Starting: DVA = %08x\n", + ioread32(&vmeLL->dva)); + printk(KERN_ERR "Starting: DLV = %08x\n", + ioread32(&vmeLL->dlv)); + printk(KERN_ERR "Starting: DTBC = %08x\n", + ioread32(&vmeLL->dtbc)); + printk(KERN_ERR "Starting: DCTL = %08x\n", + ioread32(&vmeLL->dctl)); +#endif + /* Write registers */ + iowrite32(ioread32(&vmeLL->dva), ca91cx42_bridge->base + DVA); + iowrite32(ioread32(&vmeLL->dlv), ca91cx42_bridge->base + DLA); + iowrite32(ioread32(&vmeLL->dtbc), ca91cx42_bridge->base + DTBC); + iowrite32(ioread32(&vmeLL->dctl), ca91cx42_bridge->base + DCTL); + iowrite32(0, ca91cx42_bridge->base + DCPP); + } + + /* Start the operation */ + iowrite32(dgcsreg, ca91cx42_bridge->base + DGCS); + val = get_tbl(); + iowrite32(dgcsreg | 0x8000000F, ca91cx42_bridge->base + DGCS); + return val; +} + +TDMA_Cmd_Packet *ca91cx42_setup_dma(vmeDmaPacket_t * vmeDma) +{ + vmeDmaPacket_t *vmeCur; + int maxPerPage; + int currentLLcount; + TDMA_Cmd_Packet *startLL; + TDMA_Cmd_Packet *currentLL; + TDMA_Cmd_Packet *nextLL; + unsigned int dctlreg = 0; + + maxPerPage = PAGESIZE / sizeof(TDMA_Cmd_Packet) - 1; + startLL = (TDMA_Cmd_Packet *) __get_free_pages(GFP_KERNEL, 0); + if (startLL == 0) { + return startLL; + } + /* First allocate pages for descriptors and create linked list */ + vmeCur = vmeDma; + currentLL = startLL; + currentLLcount = 0; + while (vmeCur != 0) { + if (vmeCur->pNextPacket != 0) { + currentLL->dcpp = (unsigned int)(currentLL + 1); + currentLLcount++; + if (currentLLcount >= maxPerPage) { + currentLL->dcpp = + __get_free_pages(GFP_KERNEL, 0); + currentLLcount = 0; + } + currentLL = (TDMA_Cmd_Packet *) currentLL->dcpp; + } else { + currentLL->dcpp = (unsigned int)0; + } + vmeCur = vmeCur->pNextPacket; + } + + /* Next fill in information for each descriptor */ + vmeCur = vmeDma; + currentLL = startLL; + while (vmeCur != 0) { + if (vmeCur->srcBus == VME_DMA_VME) { + iowrite32(vmeCur->srcAddr, ¤tLL->dva); + iowrite32(vmeCur->dstAddr, ¤tLL->dlv); + } else { + iowrite32(vmeCur->srcAddr, ¤tLL->dlv); + iowrite32(vmeCur->dstAddr, ¤tLL->dva); + } + uniSetupDctlReg(vmeCur, &dctlreg); + iowrite32(dctlreg, ¤tLL->dctl); + iowrite32(vmeCur->byteCount, ¤tLL->dtbc); + + currentLL = (TDMA_Cmd_Packet *) currentLL->dcpp; + vmeCur = vmeCur->pNextPacket; + } + + /* Convert Links to PCI addresses. */ + currentLL = startLL; + while (currentLL != 0) { + nextLL = (TDMA_Cmd_Packet *) currentLL->dcpp; + if (nextLL == 0) { + iowrite32(1, ¤tLL->dcpp); + } else { + iowrite32((unsigned int)virt_to_bus(nextLL), + ¤tLL->dcpp); + } + currentLL = nextLL; + } + + /* Return pointer to descriptors list */ + return startLL; +} + +int ca91cx42_free_dma(TDMA_Cmd_Packet *startLL) +{ + TDMA_Cmd_Packet *currentLL; + TDMA_Cmd_Packet *prevLL; + TDMA_Cmd_Packet *nextLL; + unsigned int dcppreg; + + /* Convert Links to virtual addresses. */ + currentLL = startLL; + while (currentLL != 0) { + dcppreg = ioread32(¤tLL->dcpp); + dcppreg &= ~6; + if (dcppreg & 1) { + currentLL->dcpp = 0; + } else { + currentLL->dcpp = (unsigned int)bus_to_virt(dcppreg); + } + currentLL = (TDMA_Cmd_Packet *) currentLL->dcpp; + } + + /* Free all pages associated with the descriptors. */ + currentLL = startLL; + prevLL = currentLL; + while (currentLL != 0) { + nextLL = (TDMA_Cmd_Packet *) currentLL->dcpp; + if (currentLL + 1 != nextLL) { + free_pages((int)prevLL, 0); + prevLL = nextLL; + } + currentLL = nextLL; + } + + /* Return pointer to descriptors list */ + return 0; +} + +int ca91cx42_do_dma(vmeDmaPacket_t *vmeDma) +{ + unsigned int dgcsreg = 0; + unsigned int dctlreg = 0; + int val; + int channel, x; + vmeDmaPacket_t *curDma; + TDMA_Cmd_Packet *dmaLL; + + /* Sanity check the VME chain. */ + channel = vmeDma->channel_number; + if (channel > 0) { + return -EINVAL; + } + curDma = vmeDma; + while (curDma != 0) { + if (curDma->byteCount == 0) { + return -EINVAL; + } + if (curDma->byteCount >= 0x1000000) { + return -EINVAL; + } + if ((curDma->srcAddr & 7) != (curDma->dstAddr & 7)) { + return -EINVAL; + } + switch (curDma->srcBus) { + case VME_DMA_PCI: + if (curDma->dstBus != VME_DMA_VME) { + return -EINVAL; + } + break; + case VME_DMA_VME: + if (curDma->dstBus != VME_DMA_PCI) { + return -EINVAL; + } + break; + default: + return -EINVAL; + break; + } + if (uniSetupDctlReg(curDma, &dctlreg) < 0) { + return -EINVAL; + } + + curDma = curDma->pNextPacket; + if (curDma == vmeDma) { /* Endless Loop! */ + return -EINVAL; + } + } + + /* calculate control register */ + if (vmeDma->pNextPacket != 0) { + dgcsreg = 0x8000000; + } else { + dgcsreg = 0; + } + + for (x = 0; x < 8; x++) { /* vme block size */ + if ((256 << x) >= vmeDma->maxVmeBlockSize) { + break; + } + } + if (x == 8) + x = 7; + dgcsreg |= (x << 20); + + if (vmeDma->vmeBackOffTimer) { + for (x = 1; x < 8; x++) { /* vme timer */ + if ((16 << (x - 1)) >= vmeDma->vmeBackOffTimer) { + break; + } + } + if (x == 8) + x = 7; + dgcsreg |= (x << 16); + } + /*` Setup the dma chain */ + dmaLL = ca91cx42_setup_dma(vmeDma); + + /* Start the DMA */ + if (dgcsreg & 0x8000000) { + vmeDma->vmeDmaStartTick = + ca91cx42_start_dma(channel, dgcsreg, + (TDMA_Cmd_Packet *) virt_to_phys(dmaLL)); + } else { + vmeDma->vmeDmaStartTick = + ca91cx42_start_dma(channel, dgcsreg, dmaLL); + } + + wait_event_interruptible(dma_queue, + ioread32(ca91cx42_bridge->base + DGCS) & 0x800); + + val = ioread32(ca91cx42_bridge->base + DGCS); + iowrite32(val | 0xF00, ca91cx42_bridge->base + DGCS); + + vmeDma->vmeDmaStatus = 0; + + if (!(val & 0x00000800)) { + vmeDma->vmeDmaStatus = val & 0x700; + printk(KERN_ERR "ca91c042: DMA Error in ca91cx42_DMA_irqhandler" + " DGCS=%08X\n", val); + val = ioread32(ca91cx42_bridge->base + DCPP); + printk(KERN_ERR "ca91c042: DCPP=%08X\n", val); + val = ioread32(ca91cx42_bridge->base + DCTL); + printk(KERN_ERR "ca91c042: DCTL=%08X\n", val); + val = ioread32(ca91cx42_bridge->base + DTBC); + printk(KERN_ERR "ca91c042: DTBC=%08X\n", val); + val = ioread32(ca91cx42_bridge->base + DLA); + printk(KERN_ERR "ca91c042: DLA=%08X\n", val); + val = ioread32(ca91cx42_bridge->base + DVA); + printk(KERN_ERR "ca91c042: DVA=%08X\n", val); + + } + /* Free the dma chain */ + ca91cx42_free_dma(dmaLL); + + return 0; +} + +int ca91cx42_lm_set(vmeLmCfg_t *vmeLm) +{ + int temp_ctl = 0; + + if (vmeLm->addrU) + return -EINVAL; + + switch (vmeLm->addrSpace) { + case VME_A64: + case VME_USER3: + case VME_USER4: + return -EINVAL; + case VME_A16: + temp_ctl |= 0x00000; + break; + case VME_A24: + temp_ctl |= 0x10000; + break; + case VME_A32: + temp_ctl |= 0x20000; + break; + case VME_CRCSR: + temp_ctl |= 0x50000; + break; + case VME_USER1: + temp_ctl |= 0x60000; + break; + case VME_USER2: + temp_ctl |= 0x70000; + break; + } + + /* Disable while we are mucking around */ + iowrite32(0x00000000, ca91cx42_bridge->base + LM_CTL); + + iowrite32(vmeLm->addr, ca91cx42_bridge->base + LM_BS); + + /* Setup CTL register. */ + if (vmeLm->userAccessType & VME_SUPER) + temp_ctl |= 0x00200000; + if (vmeLm->userAccessType & VME_USER) + temp_ctl |= 0x00100000; + if (vmeLm->dataAccessType & VME_PROG) + temp_ctl |= 0x00800000; + if (vmeLm->dataAccessType & VME_DATA) + temp_ctl |= 0x00400000; + + + /* Write ctl reg and enable */ + iowrite32(0x80000000 | temp_ctl, ca91cx42_bridge->base + LM_CTL); + temp_ctl = ioread32(ca91cx42_bridge->base + LM_CTL); + + return 0; +} + +int ca91cx42_wait_lm(vmeLmCfg_t *vmeLm) +{ + unsigned long flags; + unsigned int tmp; + + spin_lock_irqsave(&lm_lock, flags); + spin_unlock_irqrestore(&lm_lock, flags); + if (tmp == 0) { + if (vmeLm->lmWait < 10) + vmeLm->lmWait = 10; + interruptible_sleep_on_timeout(&lm_queue, vmeLm->lmWait); + } + iowrite32(0x00000000, ca91cx42_bridge->base + LM_CTL); + + return 0; +} + + + +int ca91cx42_set_arbiter(vmeArbiterCfg_t *vmeArb) +{ + int temp_ctl = 0; + int vbto = 0; + + temp_ctl = ioread32(ca91cx42_bridge->base + MISC_CTL); + temp_ctl &= 0x00FFFFFF; + + if (vmeArb->globalTimeoutTimer == 0xFFFFFFFF) { + vbto = 7; + } else if (vmeArb->globalTimeoutTimer > 1024) { + return -EINVAL; + } else if (vmeArb->globalTimeoutTimer == 0) { + vbto = 0; + } else { + vbto = 1; + while ((16 * (1 << (vbto - 1))) < vmeArb->globalTimeoutTimer) + vbto += 1; + } + temp_ctl |= (vbto << 28); + + if (vmeArb->arbiterMode == VME_PRIORITY_MODE) + temp_ctl |= 1 << 26; + + if (vmeArb->arbiterTimeoutFlag) + temp_ctl |= 2 << 24; + + iowrite32(temp_ctl, ca91cx42_bridge->base + MISC_CTL); + return 0; +} + +int ca91cx42_get_arbiter(vmeArbiterCfg_t *vmeArb) +{ + int temp_ctl = 0; + int vbto = 0; + + temp_ctl = ioread32(ca91cx42_bridge->base + MISC_CTL); + + vbto = (temp_ctl >> 28) & 0xF; + if (vbto != 0) + vmeArb->globalTimeoutTimer = (16 * (1 << (vbto - 1))); + + if (temp_ctl & (1 << 26)) + vmeArb->arbiterMode = VME_PRIORITY_MODE; + else + vmeArb->arbiterMode = VME_R_ROBIN_MODE; + + if (temp_ctl & (3 << 24)) + vmeArb->arbiterTimeoutFlag = 1; + + return 0; +} + +int ca91cx42_set_requestor(vmeRequesterCfg_t *vmeReq) +{ + int temp_ctl = 0; + + temp_ctl = ioread32(ca91cx42_bridge->base + MAST_CTL); + temp_ctl &= 0xFF0FFFFF; + + if (vmeReq->releaseMode == 1) + temp_ctl |= (1 << 20); + + if (vmeReq->fairMode == 1) + temp_ctl |= (1 << 21); + + temp_ctl |= (vmeReq->requestLevel << 22); + + iowrite32(temp_ctl, ca91cx42_bridge->base + MAST_CTL); + return 0; +} + +int ca91cx42_get_requestor(vmeRequesterCfg_t *vmeReq) +{ + int temp_ctl = 0; + + temp_ctl = ioread32(ca91cx42_bridge->base + MAST_CTL); + + if (temp_ctl & (1 << 20)) + vmeReq->releaseMode = 1; + + if (temp_ctl & (1 << 21)) + vmeReq->fairMode = 1; + + vmeReq->requestLevel = (temp_ctl & 0xC00000) >> 22; + + return 0; +} + + +#endif diff --git a/drivers/staging/vme/bridges/vme_ca91cx42.h b/drivers/staging/vme/bridges/vme_ca91cx42.h new file mode 100644 index 0000000..95a42c2 --- /dev/null +++ b/drivers/staging/vme/bridges/vme_ca91cx42.h @@ -0,0 +1,505 @@ +/* + * ca91c042.h + * + * Support for the Tundra Universe 1 and Universe II VME bridge chips + * + * Author: Tom Armistead + * Updated by Ajit Prem + * Copyright 2004 Motorola Inc. + * + * Further updated by Martyn Welch <martyn.welch@gefanuc.com> + * Copyright 2009 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * + * Derived from ca91c042.h by Michael Wyrick + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef _CA91CX42_H +#define _CA91CX42_H + +#ifndef PCI_VENDOR_ID_TUNDRA +#define PCI_VENDOR_ID_TUNDRA 0x10e3 +#endif + +#ifndef PCI_DEVICE_ID_TUNDRA_CA91C142 +#define PCI_DEVICE_ID_TUNDRA_CA91C142 0x0000 +#endif + +/* + * Define the number of each that the CA91C142 supports. + */ +#define CA91C142_MAX_MASTER 8 /* Max Master Windows */ +#define CA91C142_MAX_SLAVE 8 /* Max Slave Windows */ +#define CA91C142_MAX_DMA 1 /* Max DMA Controllers */ +#define CA91C142_MAX_MAILBOX 4 /* Max Mail Box registers */ + +/* See Page 2-77 in the Universe User Manual */ +struct ca91cx42_dma_descriptor { + unsigned int dctl; /* DMA Control */ + unsigned int dtbc; /* Transfer Byte Count */ + unsigned int dlv; /* PCI Address */ + unsigned int res1; /* Reserved */ + unsigned int dva; /* Vme Address */ + unsigned int res2; /* Reserved */ + unsigned int dcpp; /* Pointer to Numed Cmd Packet with rPN */ + unsigned int res3; /* Reserved */ +}; + +struct ca91cx42_dma_entry { + struct ca91cx42_dma_descriptor descriptor; + struct list_head list; +}; + +/* Universe Register Offsets */ +/* general PCI configuration registers */ +#define CA91CX42_PCI_ID 0x000 +#define CA91CX42_PCI_CSR 0x004 +#define CA91CX42_PCI_CLASS 0x008 +#define CA91CX42_PCI_MISC0 0x00C +#define CA91CX42_PCI_BS 0x010 +#define CA91CX42_PCI_MISC1 0x03C + +#define LSI0_CTL 0x0100 +#define LSI0_BS 0x0104 +#define LSI0_BD 0x0108 +#define LSI0_TO 0x010C + +#define LSI1_CTL 0x0114 +#define LSI1_BS 0x0118 +#define LSI1_BD 0x011C +#define LSI1_TO 0x0120 + +#define LSI2_CTL 0x0128 +#define LSI2_BS 0x012C +#define LSI2_BD 0x0130 +#define LSI2_TO 0x0134 + +#define LSI3_CTL 0x013C +#define LSI3_BS 0x0140 +#define LSI3_BD 0x0144 +#define LSI3_TO 0x0148 + +#define LSI4_CTL 0x01A0 +#define LSI4_BS 0x01A4 +#define LSI4_BD 0x01A8 +#define LSI4_TO 0x01AC + +#define LSI5_CTL 0x01B4 +#define LSI5_BS 0x01B8 +#define LSI5_BD 0x01BC +#define LSI5_TO 0x01C0 + +#define LSI6_CTL 0x01C8 +#define LSI6_BS 0x01CC +#define LSI6_BD 0x01D0 +#define LSI6_TO 0x01D4 + +#define LSI7_CTL 0x01DC +#define LSI7_BS 0x01E0 +#define LSI7_BD 0x01E4 +#define LSI7_TO 0x01E8 + +static const int CA91CX42_LSI_CTL[] = { LSI0_CTL, LSI1_CTL, LSI2_CTL, LSI3_CTL, + LSI4_CTL, LSI5_CTL, LSI6_CTL, LSI7_CTL }; + +static const int CA91CX42_LSI_BS[] = { LSI0_BS, LSI1_BS, LSI2_BS, LSI3_BS, + LSI4_BS, LSI5_BS, LSI6_BS, LSI7_BS }; + +static const int CA91CX42_LSI_BD[] = { LSI0_BD, LSI1_BD, LSI2_BD, LSI3_BD, + LSI4_BD, LSI5_BD, LSI6_BD, LSI7_BD }; + +static const int CA91CX42_LSI_TO[] = { LSI0_TO, LSI1_TO, LSI2_TO, LSI3_TO, + LSI4_TO, LSI5_TO, LSI6_TO, LSI7_TO }; + +#define SCYC_CTL 0x0170 +#define SCYC_ADDR 0x0174 +#define SCYC_EN 0x0178 +#define SCYC_CMP 0x017C +#define SCYC_SWP 0x0180 +#define LMISC 0x0184 +#define SLSI 0x0188 +#define L_CMDERR 0x018C +#define LAERR 0x0190 + +#define DCTL 0x0200 +#define DTBC 0x0204 +#define DLA 0x0208 +#define DVA 0x0210 +#define DCPP 0x0218 +#define DGCS 0x0220 +#define D_LLUE 0x0224 + +#define LINT_EN 0x0300 +#define LINT_STAT 0x0304 +#define LINT_MAP0 0x0308 +#define LINT_MAP1 0x030C +#define VINT_EN 0x0310 +#define VINT_STAT 0x0314 +#define VINT_MAP0 0x0318 +#define VINT_MAP1 0x031C +#define STATID 0x0320 + +#define V1_STATID 0x0324 +#define V2_STATID 0x0328 +#define V3_STATID 0x032C +#define V4_STATID 0x0330 +#define V5_STATID 0x0334 +#define V6_STATID 0x0338 +#define V7_STATID 0x033C + +static const int CA91CX42_V_STATID[8] = { 0, V1_STATID, V2_STATID, V3_STATID, + V4_STATID, V5_STATID, V6_STATID, + V7_STATID }; + +#define LINT_MAP2 0x0340 +#define VINT_MAP2 0x0344 + +#define MBOX0 0x0348 +#define MBOX1 0x034C +#define MBOX2 0x0350 +#define MBOX3 0x0354 +#define SEMA0 0x0358 +#define SEMA1 0x035C + +#define MAST_CTL 0x0400 +#define MISC_CTL 0x0404 +#define MISC_STAT 0x0408 +#define USER_AM 0x040C + +#define VSI0_CTL 0x0F00 +#define VSI0_BS 0x0F04 +#define VSI0_BD 0x0F08 +#define VSI0_TO 0x0F0C + +#define VSI1_CTL 0x0F14 +#define VSI1_BS 0x0F18 +#define VSI1_BD 0x0F1C +#define VSI1_TO 0x0F20 + +#define VSI2_CTL 0x0F28 +#define VSI2_BS 0x0F2C +#define VSI2_BD 0x0F30 +#define VSI2_TO 0x0F34 + +#define VSI3_CTL 0x0F3C +#define VSI3_BS 0x0F40 +#define VSI3_BD 0x0F44 +#define VSI3_TO 0x0F48 + +#define LM_CTL 0x0F64 +#define LM_BS 0x0F68 + +#define VRAI_CTL 0x0F70 + +#define VRAI_BS 0x0F74 +#define VCSR_CTL 0x0F80 +#define VCSR_TO 0x0F84 +#define V_AMERR 0x0F88 +#define VAERR 0x0F8C + +#define VSI4_CTL 0x0F90 +#define VSI4_BS 0x0F94 +#define VSI4_BD 0x0F98 +#define VSI4_TO 0x0F9C + +#define VSI5_CTL 0x0FA4 +#define VSI5_BS 0x0FA8 +#define VSI5_BD 0x0FAC +#define VSI5_TO 0x0FB0 + +#define VSI6_CTL 0x0FB8 +#define VSI6_BS 0x0FBC +#define VSI6_BD 0x0FC0 +#define VSI6_TO 0x0FC4 + +#define VSI7_CTL 0x0FCC +#define VSI7_BS 0x0FD0 +#define VSI7_BD 0x0FD4 +#define VSI7_TO 0x0FD8 + +static const int CA91CX42_VSI_CTL[] = { VSI0_CTL, VSI1_CTL, VSI2_CTL, VSI3_CTL, + VSI4_CTL, VSI5_CTL, VSI6_CTL, VSI7_CTL }; + +static const int CA91CX42_VSI_BS[] = { VSI0_BS, VSI1_BS, VSI2_BS, VSI3_BS, + VSI4_BS, VSI5_BS, VSI6_BS, VSI7_BS }; + +static const int CA91CX42_VSI_BD[] = { VSI0_BD, VSI1_BD, VSI2_BD, VSI3_BD, + VSI4_BD, VSI5_BD, VSI6_BD, VSI7_BD }; + +static const int CA91CX42_VSI_TO[] = { VSI0_TO, VSI1_TO, VSI2_TO, VSI3_TO, + VSI4_TO, VSI5_TO, VSI6_TO, VSI7_TO }; + +#define VCSR_CLR 0x0FF4 +#define VCSR_SET 0x0FF8 +#define VCSR_BS 0x0FFC + +// DMA General Control/Status Register DGCS (0x220) +// 32-24 || GO | STOPR | HALTR | 0 || CHAIN | 0 | 0 | 0 || +// 23-16 || VON || VOFF || +// 15-08 || ACT | STOP | HALT | 0 || DONE | LERR | VERR | P_ERR || +// 07-00 || 0 | INT_S | INT_H | 0 || I_DNE | I_LER | I_VER | I_PER || + +// VON - Length Per DMA VMEBus Transfer +// 0000 = None +// 0001 = 256 Bytes +// 0010 = 512 +// 0011 = 1024 +// 0100 = 2048 +// 0101 = 4096 +// 0110 = 8192 +// 0111 = 16384 + +// VOFF - wait between DMA tenures +// 0000 = 0 us +// 0001 = 16 +// 0010 = 32 +// 0011 = 64 +// 0100 = 128 +// 0101 = 256 +// 0110 = 512 +// 0111 = 1024 + +/* + * PCI Class Register + * offset 008 + */ +#define CA91CX42_BM_PCI_CLASS_BASE 0xFF000000 +#define CA91CX42_OF_PCI_CLASS_BASE 24 +#define CA91CX42_BM_PCI_CLASS_SUB 0x00FF0000 +#define CA91CX42_OF_PCI_CLASS_SUB 16 +#define CA91CX42_BM_PCI_CLASS_PROG 0x0000FF00 +#define CA91CX42_OF_PCI_CLASS_PROG 8 +#define CA91CX42_BM_PCI_CLASS_RID 0x000000FF +#define CA91CX42_OF_PCI_CLASS_RID 0 + +#define CA91CX42_OF_PCI_CLASS_RID_UNIVERSE_I 0 +#define CA91CX42_OF_PCI_CLASS_RID_UNIVERSE_II 1 + +/* + * PCI Misc Register + * offset 00C + */ +#define CA91CX42_BM_PCI_MISC0_BISTC 0x80000000 +#define CA91CX42_BM_PCI_MISC0_SBIST 0x60000000 +#define CA91CX42_BM_PCI_MISC0_CCODE 0x0F000000 +#define CA91CX42_BM_PCI_MISC0_MFUNCT 0x00800000 +#define CA91CX42_BM_PCI_MISC0_LAYOUT 0x007F0000 +#define CA91CX42_BM_PCI_MISC0_LTIMER 0x0000FF00 +#define CA91CX42_OF_PCI_MISC0_LTIMER 8 + + +/* + * LSI Control Register + * offset 100 + */ +#define CA91CX42_LSI_CTL_EN (1<<31) +#define CA91CX42_LSI_CTL_PWEN (1<<30) + +#define CA91CX42_LSI_CTL_VDW_M (3<<22) +#define CA91CX42_LSI_CTL_VDW_D8 0 +#define CA91CX42_LSI_CTL_VDW_D16 (1<<22) +#define CA91CX42_LSI_CTL_VDW_D32 (1<<23) +#define CA91CX42_LSI_CTL_VDW_D64 (3<<22) + +#define CA91CX42_LSI_CTL_VAS_M (7<<16) +#define CA91CX42_LSI_CTL_VAS_A16 0 +#define CA91CX42_LSI_CTL_VAS_A24 (1<<16) +#define CA91CX42_LSI_CTL_VAS_A32 (1<<17) +#define CA91CX42_LSI_CTL_VAS_CRCSR (5<<16) +#define CA91CX42_LSI_CTL_VAS_USER1 (3<<17) +#define CA91CX42_LSI_CTL_VAS_USER2 (7<<16) + +#define CA91CX42_LSI_CTL_PGM_M (1<<14) +#define CA91CX42_LSI_CTL_PGM_DATA 0 +#define CA91CX42_LSI_CTL_PGM_PGM (1<<14) + +#define CA91CX42_LSI_CTL_SUPER_M (1<<12) +#define CA91CX42_LSI_CTL_SUPER_NPRIV 0 +#define CA91CX42_LSI_CTL_SUPER_SUPR (1<<12) + +#define CA91CX42_LSI_CTL_VCT_M (1<<8) +#define CA91CX42_LSI_CTL_VCT_BLT (1<<8) +#define CA91CX42_LSI_CTL_VCT_MBLT (1<<8) +#define CA91CX42_LSI_CTL_LAS (1<<0) + + +/* + * LMISC Register + * offset 184 + */ +#define CA91CX42_BM_LMISC_CRT 0xF0000000 +#define CA91CX42_OF_LMISC_CRT 28 +#define CA91CX42_BM_LMISC_CWT 0x0F000000 +#define CA91CX42_OF_LMISC_CWT 24 + +/* + * SLSI Register + * offset 188 + */ +#define CA91CX42_BM_SLSI_EN 0x80000000 +#define CA91CX42_BM_SLSI_PWEN 0x40000000 +#define CA91CX42_BM_SLSI_VDW 0x00F00000 +#define CA91CX42_OF_SLSI_VDW 20 +#define CA91CX42_BM_SLSI_PGM 0x0000F000 +#define CA91CX42_OF_SLSI_PGM 12 +#define CA91CX42_BM_SLSI_SUPER 0x00000F00 +#define CA91CX42_OF_SLSI_SUPER 8 +#define CA91CX42_BM_SLSI_BS 0x000000F6 +#define CA91CX42_OF_SLSI_BS 2 +#define CA91CX42_BM_SLSI_LAS 0x00000003 +#define CA91CX42_OF_SLSI_LAS 0 +#define CA91CX42_BM_SLSI_RESERVED 0x3F0F0000 + +/* + * PCI Interrupt Enable Register + * offset 300 + */ +#define CA91CX42_LINT_LM3 0x00800000 +#define CA91CX42_LINT_LM2 0x00400000 +#define CA91CX42_LINT_LM1 0x00200000 +#define CA91CX42_LINT_LM0 0x00100000 +#define CA91CX42_LINT_MBOX3 0x00080000 +#define CA91CX42_LINT_MBOX2 0x00040000 +#define CA91CX42_LINT_MBOX1 0x00020000 +#define CA91CX42_LINT_MBOX0 0x00010000 +#define CA91CX42_LINT_ACFAIL 0x00008000 +#define CA91CX42_LINT_SYSFAIL 0x00004000 +#define CA91CX42_LINT_SW_INT 0x00002000 +#define CA91CX42_LINT_SW_IACK 0x00001000 + +#define CA91CX42_LINT_VERR 0x00000400 +#define CA91CX42_LINT_LERR 0x00000200 +#define CA91CX42_LINT_DMA 0x00000100 +#define CA91CX42_LINT_VIRQ7 0x00000080 +#define CA91CX42_LINT_VIRQ6 0x00000040 +#define CA91CX42_LINT_VIRQ5 0x00000020 +#define CA91CX42_LINT_VIRQ4 0x00000010 +#define CA91CX42_LINT_VIRQ3 0x00000008 +#define CA91CX42_LINT_VIRQ2 0x00000004 +#define CA91CX42_LINT_VIRQ1 0x00000002 +#define CA91CX42_LINT_VOWN 0x00000001 + +static const int CA91CX42_LINT_VIRQ[] = { 0, CA91CX42_LINT_VIRQ1, + CA91CX42_LINT_VIRQ2, CA91CX42_LINT_VIRQ3, + CA91CX42_LINT_VIRQ4, CA91CX42_LINT_VIRQ5, + CA91CX42_LINT_VIRQ6, CA91CX42_LINT_VIRQ7 }; + +#define CA91CX42_LINT_MBOX 0x000F0000 + +static const int CA91CX42_LINT_LM[] = { CA91CX42_LINT_LM0, CA91CX42_LINT_LM1, + CA91CX42_LINT_LM2, CA91CX42_LINT_LM3 }; + +/* + * MAST_CTL Register + * offset 400 + */ +#define CA91CX42_BM_MAST_CTL_MAXRTRY 0xF0000000 +#define CA91CX42_OF_MAST_CTL_MAXRTRY 28 +#define CA91CX42_BM_MAST_CTL_PWON 0x0F000000 +#define CA91CX42_OF_MAST_CTL_PWON 24 +#define CA91CX42_BM_MAST_CTL_VRL 0x00C00000 +#define CA91CX42_OF_MAST_CTL_VRL 22 +#define CA91CX42_BM_MAST_CTL_VRM 0x00200000 +#define CA91CX42_BM_MAST_CTL_VREL 0x00100000 +#define CA91CX42_BM_MAST_CTL_VOWN 0x00080000 +#define CA91CX42_BM_MAST_CTL_VOWN_ACK 0x00040000 +#define CA91CX42_BM_MAST_CTL_PABS 0x00001000 +#define CA91CX42_BM_MAST_CTL_BUS_NO 0x0000000F +#define CA91CX42_OF_MAST_CTL_BUS_NO 0 + +/* + * MISC_CTL Register + * offset 404 + */ +#define CA91CX42_MISC_CTL_VBTO 0xF0000000 +#define CA91CX42_MISC_CTL_VARB 0x04000000 +#define CA91CX42_MISC_CTL_VARBTO 0x03000000 +#define CA91CX42_MISC_CTL_SW_LRST 0x00800000 +#define CA91CX42_MISC_CTL_SW_SRST 0x00400000 +#define CA91CX42_MISC_CTL_BI 0x00100000 +#define CA91CX42_MISC_CTL_ENGBI 0x00080000 +#define CA91CX42_MISC_CTL_RESCIND 0x00040000 +#define CA91CX42_MISC_CTL_SYSCON 0x00020000 +#define CA91CX42_MISC_CTL_V64AUTO 0x00010000 +#define CA91CX42_MISC_CTL_RESERVED 0x0820FFFF + +#define CA91CX42_OF_MISC_CTL_VARBTO 24 +#define CA91CX42_OF_MISC_CTL_VBTO 28 + +/* + * MISC_STAT Register + * offset 408 + */ +#define CA91CX42_BM_MISC_STAT_ENDIAN 0x80000000 +#define CA91CX42_BM_MISC_STAT_LCLSIZE 0x40000000 +#define CA91CX42_BM_MISC_STAT_DY4AUTO 0x08000000 +#define CA91CX42_BM_MISC_STAT_MYBBSY 0x00200000 +#define CA91CX42_BM_MISC_STAT_DY4DONE 0x00080000 +#define CA91CX42_BM_MISC_STAT_TXFE 0x00040000 +#define CA91CX42_BM_MISC_STAT_RXFE 0x00020000 +#define CA91CX42_BM_MISC_STAT_DY4AUTOID 0x0000FF00 +#define CA91CX42_OF_MISC_STAT_DY4AUTOID 8 + +/* + * VSI Control Register + * offset F00 + */ +#define CA91CX42_VSI_CTL_EN (1<<31) +#define CA91CX42_VSI_CTL_PWEN (1<<30) +#define CA91CX42_VSI_CTL_PREN (1<<29) + +#define CA91CX42_VSI_CTL_PGM_M (3<<22) +#define CA91CX42_VSI_CTL_PGM_DATA (1<<22) +#define CA91CX42_VSI_CTL_PGM_PGM (1<<23) + +#define CA91CX42_VSI_CTL_SUPER_M (3<<20) +#define CA91CX42_VSI_CTL_SUPER_NPRIV (1<<20) +#define CA91CX42_VSI_CTL_SUPER_SUPR (1<<21) + +#define CA91CX42_VSI_CTL_VAS_M (7<<16) +#define CA91CX42_VSI_CTL_VAS_A16 0 +#define CA91CX42_VSI_CTL_VAS_A24 (1<<16) +#define CA91CX42_VSI_CTL_VAS_A32 (1<<17) +#define CA91CX42_VSI_CTL_VAS_USER1 (3<<17) +#define CA91CX42_VSI_CTL_VAS_USER2 (7<<16) + +#define CA91CX42_VSI_CTL_LD64EN (1<<7) +#define CA91CX42_VSI_CTL_LLRMW (1<<6) + +#define CA91CX42_VSI_CTL_LAS_M (3<<0) +#define CA91CX42_VSI_CTL_LAS_PCI_MS 0 +#define CA91CX42_VSI_CTL_LAS_PCI_IO (1<<0) +#define CA91CX42_VSI_CTL_LAS_PCI_CONF (1<<1) + +/* + * VRAI_CTL Register + * offset F70 + */ +#define CA91CX42_BM_VRAI_CTL_EN 0x80000000 +#define CA91CX42_BM_VRAI_CTL_PGM 0x00C00000 +#define CA91CX42_OF_VRAI_CTL_PGM 22 +#define CA91CX42_BM_VRAI_CTL_SUPER 0x00300000 +#define CA91CX42_OF_VRAI_CTL_SUPER 20 +#define CA91CX42_BM_VRAI_CTL_VAS 0x00030000 +#define CA91CX42_OF_VRAI_CTL_VAS 16 + +/* VCSR_CTL Register + * offset F80 + */ +#define CA91CX42_VCSR_CTL_EN (1<<31) + +#define CA91CX42_VCSR_CTL_LAS_M (3<<0) +#define CA91CX42_VCSR_CTL_LAS_PCI_MS 0 +#define CA91CX42_VCSR_CTL_LAS_PCI_IO (1<<0) +#define CA91CX42_VCSR_CTL_LAS_PCI_CONF (1<<1) + +/* VCSR_BS Register + * offset FFC + */ +#define CA91CX42_VCSR_BS_SLOT_M (0x1F<<27) + +#endif /* _CA91CX42_H */ diff --git a/drivers/staging/vme/bridges/vme_tsi148.c b/drivers/staging/vme/bridges/vme_tsi148.c new file mode 100644 index 0000000..8960fa9 --- /dev/null +++ b/drivers/staging/vme/bridges/vme_tsi148.c @@ -0,0 +1,2925 @@ +/* + * Support for the Tundra TSI148 VME-PCI Bridge Chip + * + * Author: Martyn Welch <martyn.welch@gefanuc.com> + * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * + * Based on work by Tom Armistead and Ajit Prem + * Copyright 2004 Motorola Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/mm.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/proc_fs.h> +#include <linux/pci.h> +#include <linux/poll.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/uaccess.h> + +#include "../vme.h" +#include "../vme_bridge.h" +#include "vme_tsi148.h" + +static int __init tsi148_init(void); +static int tsi148_probe(struct pci_dev *, const struct pci_device_id *); +static void tsi148_remove(struct pci_dev *); +static void __exit tsi148_exit(void); + + +int tsi148_slave_set(struct vme_slave_resource *, int, unsigned long long, + unsigned long long, dma_addr_t, vme_address_t, vme_cycle_t); +int tsi148_slave_get(struct vme_slave_resource *, int *, unsigned long long *, + unsigned long long *, dma_addr_t *, vme_address_t *, vme_cycle_t *); + +int tsi148_master_get(struct vme_master_resource *, int *, unsigned long long *, + unsigned long long *, vme_address_t *, vme_cycle_t *, vme_width_t *); +int tsi148_master_set(struct vme_master_resource *, int, unsigned long long, + unsigned long long, vme_address_t, vme_cycle_t, vme_width_t); +ssize_t tsi148_master_read(struct vme_master_resource *, void *, size_t, + loff_t); +ssize_t tsi148_master_write(struct vme_master_resource *, void *, size_t, + loff_t); +unsigned int tsi148_master_rmw(struct vme_master_resource *, unsigned int, + unsigned int, unsigned int, loff_t); +int tsi148_dma_list_add (struct vme_dma_list *, struct vme_dma_attr *, + struct vme_dma_attr *, size_t); +int tsi148_dma_list_exec(struct vme_dma_list *); +int tsi148_dma_list_empty(struct vme_dma_list *); +int tsi148_generate_irq(int, int); +int tsi148_slot_get(void); + +/* Modue parameter */ +int err_chk = 0; + +/* XXX These should all be in a per device structure */ +struct vme_bridge *tsi148_bridge; +wait_queue_head_t dma_queue[2]; +wait_queue_head_t iack_queue; +void (*lm_callback[4])(int); /* Called in interrupt handler, be careful! */ +void *crcsr_kernel; +dma_addr_t crcsr_bus; +struct vme_master_resource *flush_image; +struct mutex vme_rmw; /* Only one RMW cycle at a time */ +struct mutex vme_int; /* + * Only one VME interrupt can be + * generated at a time, provide locking + */ +struct mutex vme_irq; /* Locking for VME irq callback configuration */ + + +static char driver_name[] = "vme_tsi148"; + +static struct pci_device_id tsi148_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_TUNDRA, PCI_DEVICE_ID_TUNDRA_TSI148) }, + { }, +}; + +static struct pci_driver tsi148_driver = { + .name = driver_name, + .id_table = tsi148_ids, + .probe = tsi148_probe, + .remove = tsi148_remove, +}; + +static void reg_join(unsigned int high, unsigned int low, + unsigned long long *variable) +{ + *variable = (unsigned long long)high << 32; + *variable |= (unsigned long long)low; +} + +static void reg_split(unsigned long long variable, unsigned int *high, + unsigned int *low) +{ + *low = (unsigned int)variable & 0xFFFFFFFF; + *high = (unsigned int)(variable >> 32); +} + +/* + * Wakes up DMA queue. + */ +static u32 tsi148_DMA_irqhandler(int channel_mask) +{ + u32 serviced = 0; + + if (channel_mask & TSI148_LCSR_INTS_DMA0S) { + wake_up(&dma_queue[0]); + serviced |= TSI148_LCSR_INTC_DMA0C; + } + if (channel_mask & TSI148_LCSR_INTS_DMA1S) { + wake_up(&dma_queue[1]); + serviced |= TSI148_LCSR_INTC_DMA1C; + } + + return serviced; +} + +/* + * Wake up location monitor queue + */ +static u32 tsi148_LM_irqhandler(u32 stat) +{ + int i; + u32 serviced = 0; + + for (i = 0; i < 4; i++) { + if(stat & TSI148_LCSR_INTS_LMS[i]) { + /* We only enable interrupts if the callback is set */ + lm_callback[i](i); + serviced |= TSI148_LCSR_INTC_LMC[i]; + } + } + + return serviced; +} + +/* + * Wake up mail box queue. + * + * XXX This functionality is not exposed up though API. + */ +static u32 tsi148_MB_irqhandler(u32 stat) +{ + int i; + u32 val; + u32 serviced = 0; + + for (i = 0; i < 4; i++) { + if(stat & TSI148_LCSR_INTS_MBS[i]) { + val = ioread32be(tsi148_bridge->base + + TSI148_GCSR_MBOX[i]); + printk("VME Mailbox %d received: 0x%x\n", i, val); + serviced |= TSI148_LCSR_INTC_MBC[i]; + } + } + + return serviced; +} + +/* + * Display error & status message when PERR (PCI) exception interrupt occurs. + */ +static u32 tsi148_PERR_irqhandler(void) +{ + printk(KERN_ERR + "PCI Exception at address: 0x%08x:%08x, attributes: %08x\n", + ioread32be(tsi148_bridge->base + TSI148_LCSR_EDPAU), + ioread32be(tsi148_bridge->base + TSI148_LCSR_EDPAL), + ioread32be(tsi148_bridge->base + TSI148_LCSR_EDPAT) + ); + printk(KERN_ERR + "PCI-X attribute reg: %08x, PCI-X split completion reg: %08x\n", + ioread32be(tsi148_bridge->base + TSI148_LCSR_EDPXA), + ioread32be(tsi148_bridge->base + TSI148_LCSR_EDPXS) + ); + + iowrite32be(TSI148_LCSR_EDPAT_EDPCL, + tsi148_bridge->base + TSI148_LCSR_EDPAT); + + return TSI148_LCSR_INTC_PERRC; +} + +/* + * Save address and status when VME error interrupt occurs. + */ +static u32 tsi148_VERR_irqhandler(void) +{ + unsigned int error_addr_high, error_addr_low; + unsigned long long error_addr; + u32 error_attrib; + struct vme_bus_error *error; + + error_addr_high = ioread32be(tsi148_bridge->base + TSI148_LCSR_VEAU); + error_addr_low = ioread32be(tsi148_bridge->base + TSI148_LCSR_VEAL); + error_attrib = ioread32be(tsi148_bridge->base + TSI148_LCSR_VEAT); + + reg_join(error_addr_high, error_addr_low, &error_addr); + + /* Check for exception register overflow (we have lost error data) */ + if(error_attrib & TSI148_LCSR_VEAT_VEOF) { + printk(KERN_ERR "VME Bus Exception Overflow Occurred\n"); + } + + error = (struct vme_bus_error *)kmalloc(sizeof (struct vme_bus_error), + GFP_ATOMIC); + if (error) { + error->address = error_addr; + error->attributes = error_attrib; + list_add_tail(&(error->list), &(tsi148_bridge->vme_errors)); + } else { + printk(KERN_ERR + "Unable to alloc memory for VMEbus Error reporting\n"); + printk(KERN_ERR + "VME Bus Error at address: 0x%llx, attributes: %08x\n", + error_addr, error_attrib); + } + + /* Clear Status */ + iowrite32be(TSI148_LCSR_VEAT_VESCL, + tsi148_bridge->base + TSI148_LCSR_VEAT); + + return TSI148_LCSR_INTC_VERRC; +} + +/* + * Wake up IACK queue. + */ +static u32 tsi148_IACK_irqhandler(void) +{ + printk("tsi148_IACK_irqhandler\n"); + wake_up(&iack_queue); + + return TSI148_LCSR_INTC_IACKC; +} + +/* + * Calling VME bus interrupt callback if provided. + */ +static u32 tsi148_VIRQ_irqhandler(u32 stat) +{ + int vec, i, serviced = 0; + void (*call)(int, int, void *); + void *priv_data; + + for (i = 7; i > 0; i--) { + if (stat & (1 << i)) { + /* + * Note: Even though the registers are defined + * as 32-bits in the spec, we only want to issue + * 8-bit IACK cycles on the bus, read from offset + * 3. + */ + vec = ioread8(tsi148_bridge->base + + TSI148_LCSR_VIACK[i] + 3); + + call = tsi148_bridge->irq[i - 1].callback[vec].func; + priv_data = + tsi148_bridge->irq[i-1].callback[vec].priv_data; + + if (call != NULL) + call(i, vec, priv_data); + else + printk("Spurilous VME interrupt, level:%x, " + "vector:%x\n", i, vec); + + serviced |= (1 << i); + } + } + + return serviced; +} + +/* + * Top level interrupt handler. Clears appropriate interrupt status bits and + * then calls appropriate sub handler(s). + */ +static irqreturn_t tsi148_irqhandler(int irq, void *dev_id) +{ + u32 stat, enable, serviced = 0; + + /* Determine which interrupts are unmasked and set */ + enable = ioread32be(tsi148_bridge->base + TSI148_LCSR_INTEO); + stat = ioread32be(tsi148_bridge->base + TSI148_LCSR_INTS); + + /* Only look at unmasked interrupts */ + stat &= enable; + + if (unlikely(!stat)) { + return IRQ_NONE; + } + + /* Call subhandlers as appropriate */ + /* DMA irqs */ + if (stat & (TSI148_LCSR_INTS_DMA1S | TSI148_LCSR_INTS_DMA0S)) + serviced |= tsi148_DMA_irqhandler(stat); + + /* Location monitor irqs */ + if (stat & (TSI148_LCSR_INTS_LM3S | TSI148_LCSR_INTS_LM2S | + TSI148_LCSR_INTS_LM1S | TSI148_LCSR_INTS_LM0S)) + serviced |= tsi148_LM_irqhandler(stat); + + /* Mail box irqs */ + if (stat & (TSI148_LCSR_INTS_MB3S | TSI148_LCSR_INTS_MB2S | + TSI148_LCSR_INTS_MB1S | TSI148_LCSR_INTS_MB0S)) + serviced |= tsi148_MB_irqhandler(stat); + + /* PCI bus error */ + if (stat & TSI148_LCSR_INTS_PERRS) + serviced |= tsi148_PERR_irqhandler(); + + /* VME bus error */ + if (stat & TSI148_LCSR_INTS_VERRS) + serviced |= tsi148_VERR_irqhandler(); + + /* IACK irq */ + if (stat & TSI148_LCSR_INTS_IACKS) + serviced |= tsi148_IACK_irqhandler(); + + /* VME bus irqs */ + if (stat & (TSI148_LCSR_INTS_IRQ7S | TSI148_LCSR_INTS_IRQ6S | + TSI148_LCSR_INTS_IRQ5S | TSI148_LCSR_INTS_IRQ4S | + TSI148_LCSR_INTS_IRQ3S | TSI148_LCSR_INTS_IRQ2S | + TSI148_LCSR_INTS_IRQ1S)) + serviced |= tsi148_VIRQ_irqhandler(stat); + + /* Clear serviced interrupts */ + iowrite32be(serviced, tsi148_bridge->base + TSI148_LCSR_INTC); + + return IRQ_HANDLED; +} + +static int tsi148_irq_init(struct vme_bridge *bridge) +{ + int result; + unsigned int tmp; + struct pci_dev *pdev; + + /* Need pdev */ + pdev = container_of(bridge->parent, struct pci_dev, dev); + + /* Initialise list for VME bus errors */ + INIT_LIST_HEAD(&(bridge->vme_errors)); + + result = request_irq(pdev->irq, + tsi148_irqhandler, + IRQF_SHARED, + driver_name, pdev); + if (result) { + dev_err(&pdev->dev, "Can't get assigned pci irq vector %02X\n", + pdev->irq); + return result; + } + + /* Enable and unmask interrupts */ + tmp = TSI148_LCSR_INTEO_DMA1EO | TSI148_LCSR_INTEO_DMA0EO | + TSI148_LCSR_INTEO_MB3EO | TSI148_LCSR_INTEO_MB2EO | + TSI148_LCSR_INTEO_MB1EO | TSI148_LCSR_INTEO_MB0EO | + TSI148_LCSR_INTEO_PERREO | TSI148_LCSR_INTEO_VERREO | + TSI148_LCSR_INTEO_IACKEO; + + /* XXX This leaves the following interrupts masked. + * TSI148_LCSR_INTEO_VIEEO + * TSI148_LCSR_INTEO_SYSFLEO + * TSI148_LCSR_INTEO_ACFLEO + */ + + /* Don't enable Location Monitor interrupts here - they will be + * enabled when the location monitors are properly configured and + * a callback has been attached. + * TSI148_LCSR_INTEO_LM0EO + * TSI148_LCSR_INTEO_LM1EO + * TSI148_LCSR_INTEO_LM2EO + * TSI148_LCSR_INTEO_LM3EO + */ + + /* Don't enable VME interrupts until we add a handler, else the board + * will respond to it and we don't want that unless it knows how to + * properly deal with it. + * TSI148_LCSR_INTEO_IRQ7EO + * TSI148_LCSR_INTEO_IRQ6EO + * TSI148_LCSR_INTEO_IRQ5EO + * TSI148_LCSR_INTEO_IRQ4EO + * TSI148_LCSR_INTEO_IRQ3EO + * TSI148_LCSR_INTEO_IRQ2EO + * TSI148_LCSR_INTEO_IRQ1EO + */ + + iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); + iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN); + + return 0; +} + +static void tsi148_irq_exit(struct pci_dev *pdev) +{ + /* Turn off interrupts */ + iowrite32be(0x0, tsi148_bridge->base + TSI148_LCSR_INTEO); + iowrite32be(0x0, tsi148_bridge->base + TSI148_LCSR_INTEN); + + /* Clear all interrupts */ + iowrite32be(0xFFFFFFFF, tsi148_bridge->base + TSI148_LCSR_INTC); + + /* Detach interrupt handler */ + free_irq(pdev->irq, pdev); +} + +/* + * Check to see if an IACk has been received, return true (1) or false (0). + */ +int tsi148_iack_received(void) +{ + u32 tmp; + + tmp = ioread32be(tsi148_bridge->base + TSI148_LCSR_VICR); + + if (tmp & TSI148_LCSR_VICR_IRQS) + return 0; + else + return 1; +} + +/* + * Set up an VME interrupt + */ +int tsi148_request_irq(int level, int statid, + void (*callback)(int level, int vector, void *priv_data), + void *priv_data) +{ + u32 tmp; + + mutex_lock(&(vme_irq)); + + if(tsi148_bridge->irq[level - 1].callback[statid].func) { + mutex_unlock(&(vme_irq)); + printk("VME Interrupt already taken\n"); + return -EBUSY; + } + + + tsi148_bridge->irq[level - 1].count++; + tsi148_bridge->irq[level - 1].callback[statid].priv_data = priv_data; + tsi148_bridge->irq[level - 1].callback[statid].func = callback; + + /* Enable IRQ level */ + tmp = ioread32be(tsi148_bridge->base + TSI148_LCSR_INTEO); + tmp |= TSI148_LCSR_INTEO_IRQEO[level - 1]; + iowrite32be(tmp, tsi148_bridge->base + TSI148_LCSR_INTEO); + + tmp = ioread32be(tsi148_bridge->base + TSI148_LCSR_INTEN); + tmp |= TSI148_LCSR_INTEN_IRQEN[level - 1]; + iowrite32be(tmp, tsi148_bridge->base + TSI148_LCSR_INTEN); + + mutex_unlock(&(vme_irq)); + + return 0; +} + +/* + * Free VME interrupt + */ +void tsi148_free_irq(int level, int statid) +{ + u32 tmp; + struct pci_dev *pdev; + + mutex_lock(&(vme_irq)); + + tsi148_bridge->irq[level - 1].count--; + + /* Disable IRQ level if no more interrupts attached at this level*/ + if (tsi148_bridge->irq[level - 1].count == 0) { + tmp = ioread32be(tsi148_bridge->base + TSI148_LCSR_INTEN); + tmp &= ~TSI148_LCSR_INTEN_IRQEN[level - 1]; + iowrite32be(tmp, tsi148_bridge->base + TSI148_LCSR_INTEN); + + tmp = ioread32be(tsi148_bridge->base + TSI148_LCSR_INTEO); + tmp &= ~TSI148_LCSR_INTEO_IRQEO[level - 1]; + iowrite32be(tmp, tsi148_bridge->base + TSI148_LCSR_INTEO); + + pdev = container_of(tsi148_bridge->parent, struct pci_dev, dev); + + synchronize_irq(pdev->irq); + } + + tsi148_bridge->irq[level - 1].callback[statid].func = NULL; + tsi148_bridge->irq[level - 1].callback[statid].priv_data = NULL; + + mutex_unlock(&(vme_irq)); +} + +/* + * Generate a VME bus interrupt at the requested level & vector. Wait for + * interrupt to be acked. + */ +int tsi148_generate_irq(int level, int statid) +{ + u32 tmp; + + mutex_lock(&(vme_int)); + + /* Read VICR register */ + tmp = ioread32be(tsi148_bridge->base + TSI148_LCSR_VICR); + + /* Set Status/ID */ + tmp = (tmp & ~TSI148_LCSR_VICR_STID_M) | + (statid & TSI148_LCSR_VICR_STID_M); + iowrite32be(tmp, tsi148_bridge->base + TSI148_LCSR_VICR); + + /* Assert VMEbus IRQ */ + tmp = tmp | TSI148_LCSR_VICR_IRQL[level]; + iowrite32be(tmp, tsi148_bridge->base + TSI148_LCSR_VICR); + + /* XXX Consider implementing a timeout? */ + wait_event_interruptible(iack_queue, tsi148_iack_received()); + + mutex_unlock(&(vme_int)); + + return 0; +} + +/* + * Find the first error in this address range + */ +static struct vme_bus_error *tsi148_find_error(vme_address_t aspace, + unsigned long long address, size_t count) +{ + struct list_head *err_pos; + struct vme_bus_error *vme_err, *valid = NULL; + unsigned long long bound; + + bound = address + count; + + /* + * XXX We are currently not looking at the address space when parsing + * for errors. This is because parsing the Address Modifier Codes + * is going to be quite resource intensive to do properly. We + * should be OK just looking at the addresses and this is certainly + * much better than what we had before. + */ + err_pos = NULL; + /* Iterate through errors */ + list_for_each(err_pos, &(tsi148_bridge->vme_errors)) { + vme_err = list_entry(err_pos, struct vme_bus_error, list); + if((vme_err->address >= address) && (vme_err->address < bound)){ + valid = vme_err; + break; + } + } + + return valid; +} + +/* + * Clear errors in the provided address range. + */ +static void tsi148_clear_errors(vme_address_t aspace, + unsigned long long address, size_t count) +{ + struct list_head *err_pos, *temp; + struct vme_bus_error *vme_err; + unsigned long long bound; + + bound = address + count; + + /* + * XXX We are currently not looking at the address space when parsing + * for errors. This is because parsing the Address Modifier Codes + * is going to be quite resource intensive to do properly. We + * should be OK just looking at the addresses and this is certainly + * much better than what we had before. + */ + err_pos = NULL; + /* Iterate through errors */ + list_for_each_safe(err_pos, temp, &(tsi148_bridge->vme_errors)) { + vme_err = list_entry(err_pos, struct vme_bus_error, list); + + if((vme_err->address >= address) && (vme_err->address < bound)){ + list_del(err_pos); + kfree(vme_err); + } + } +} + +/* + * Initialize a slave window with the requested attributes. + */ +int tsi148_slave_set(struct vme_slave_resource *image, int enabled, + unsigned long long vme_base, unsigned long long size, + dma_addr_t pci_base, vme_address_t aspace, vme_cycle_t cycle) +{ + unsigned int i, addr = 0, granularity = 0; + unsigned int temp_ctl = 0; + unsigned int vme_base_low, vme_base_high; + unsigned int vme_bound_low, vme_bound_high; + unsigned int pci_offset_low, pci_offset_high; + unsigned long long vme_bound, pci_offset; + +#if 0 + printk("Set slave image %d to:\n", image->number); + printk("\tEnabled: %s\n", (enabled == 1)? "yes" : "no"); + printk("\tVME Base:0x%llx\n", vme_base); + printk("\tWindow Size:0x%llx\n", size); + printk("\tPCI Base:0x%lx\n", (unsigned long)pci_base); + printk("\tAddress Space:0x%x\n", aspace); + printk("\tTransfer Cycle Properties:0x%x\n", cycle); +#endif + + i = image->number; + + switch (aspace) { + case VME_A16: + granularity = 0x10; + addr |= TSI148_LCSR_ITAT_AS_A16; + break; + case VME_A24: + granularity = 0x1000; + addr |= TSI148_LCSR_ITAT_AS_A24; + break; + case VME_A32: + granularity = 0x10000; + addr |= TSI148_LCSR_ITAT_AS_A32; + break; + case VME_A64: + granularity = 0x10000; + addr |= TSI148_LCSR_ITAT_AS_A64; + break; + case VME_CRCSR: + case VME_USER1: + case VME_USER2: + case VME_USER3: + case VME_USER4: + default: + printk("Invalid address space\n"); + return -EINVAL; + break; + } + + /* Convert 64-bit variables to 2x 32-bit variables */ + reg_split(vme_base, &vme_base_high, &vme_base_low); + + /* + * Bound address is a valid address for the window, adjust + * accordingly + */ + vme_bound = vme_base + size - granularity; + reg_split(vme_bound, &vme_bound_high, &vme_bound_low); + pci_offset = (unsigned long long)pci_base - vme_base; + reg_split(pci_offset, &pci_offset_high, &pci_offset_low); + + if (vme_base_low & (granularity - 1)) { + printk("Invalid VME base alignment\n"); + return -EINVAL; + } + if (vme_bound_low & (granularity - 1)) { + printk("Invalid VME bound alignment\n"); + return -EINVAL; + } + if (pci_offset_low & (granularity - 1)) { + printk("Invalid PCI Offset alignment\n"); + return -EINVAL; + } + +#if 0 + printk("\tVME Bound:0x%llx\n", vme_bound); + printk("\tPCI Offset:0x%llx\n", pci_offset); +#endif + + /* Disable while we are mucking around */ + temp_ctl = ioread32be(tsi148_bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITAT); + temp_ctl &= ~TSI148_LCSR_ITAT_EN; + iowrite32be(temp_ctl, tsi148_bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITAT); + + /* Setup mapping */ + iowrite32be(vme_base_high, tsi148_bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITSAU); + iowrite32be(vme_base_low, tsi148_bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITSAL); + iowrite32be(vme_bound_high, tsi148_bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITEAU); + iowrite32be(vme_bound_low, tsi148_bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITEAL); + iowrite32be(pci_offset_high, tsi148_bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITOFU); + iowrite32be(pci_offset_low, tsi148_bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITOFL); + +/* XXX Prefetch stuff currently unsupported */ +#if 0 + + for (x = 0; x < 4; x++) { + if ((64 << x) >= vmeIn->prefetchSize) { + break; + } + } + if (x == 4) + x--; + temp_ctl |= (x << 16); + + if (vmeIn->prefetchThreshold) + if (vmeIn->prefetchThreshold) + temp_ctl |= 0x40000; +#endif + + /* Setup 2eSST speeds */ + temp_ctl &= ~TSI148_LCSR_ITAT_2eSSTM_M; + switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { + case VME_2eSST160: + temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_160; + break; + case VME_2eSST267: + temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_267; + break; + case VME_2eSST320: + temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_320; + break; + } + + /* Setup cycle types */ + temp_ctl &= ~(0x1F << 7); + if (cycle & VME_BLT) + temp_ctl |= TSI148_LCSR_ITAT_BLT; + if (cycle & VME_MBLT) + temp_ctl |= TSI148_LCSR_ITAT_MBLT; + if (cycle & VME_2eVME) + temp_ctl |= TSI148_LCSR_ITAT_2eVME; + if (cycle & VME_2eSST) + temp_ctl |= TSI148_LCSR_ITAT_2eSST; + if (cycle & VME_2eSSTB) + temp_ctl |= TSI148_LCSR_ITAT_2eSSTB; + + /* Setup address space */ + temp_ctl &= ~TSI148_LCSR_ITAT_AS_M; + temp_ctl |= addr; + + temp_ctl &= ~0xF; + if (cycle & VME_SUPER) + temp_ctl |= TSI148_LCSR_ITAT_SUPR ; + if (cycle & VME_USER) + temp_ctl |= TSI148_LCSR_ITAT_NPRIV; + if (cycle & VME_PROG) + temp_ctl |= TSI148_LCSR_ITAT_PGM; + if (cycle & VME_DATA) + temp_ctl |= TSI148_LCSR_ITAT_DATA; + + /* Write ctl reg without enable */ + iowrite32be(temp_ctl, tsi148_bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITAT); + + if (enabled) + temp_ctl |= TSI148_LCSR_ITAT_EN; + + iowrite32be(temp_ctl, tsi148_bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITAT); + + return 0; +} + +/* + * Get slave window configuration. + * + * XXX Prefetch currently unsupported. + */ +int tsi148_slave_get(struct vme_slave_resource *image, int *enabled, + unsigned long long *vme_base, unsigned long long *size, + dma_addr_t *pci_base, vme_address_t *aspace, vme_cycle_t *cycle) +{ + unsigned int i, granularity = 0, ctl = 0; + unsigned int vme_base_low, vme_base_high; + unsigned int vme_bound_low, vme_bound_high; + unsigned int pci_offset_low, pci_offset_high; + unsigned long long vme_bound, pci_offset; + + + i = image->number; + + /* Read registers */ + ctl = ioread32be(tsi148_bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITAT); + + vme_base_high = ioread32be(tsi148_bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITSAU); + vme_base_low = ioread32be(tsi148_bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITSAL); + vme_bound_high = ioread32be(tsi148_bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITEAU); + vme_bound_low = ioread32be(tsi148_bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITEAL); + pci_offset_high = ioread32be(tsi148_bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITOFU); + pci_offset_low = ioread32be(tsi148_bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITOFL); + + /* Convert 64-bit variables to 2x 32-bit variables */ + reg_join(vme_base_high, vme_base_low, vme_base); + reg_join(vme_bound_high, vme_bound_low, &vme_bound); + reg_join(pci_offset_high, pci_offset_low, &pci_offset); + + *pci_base = (dma_addr_t)vme_base + pci_offset; + + *enabled = 0; + *aspace = 0; + *cycle = 0; + + if (ctl & TSI148_LCSR_ITAT_EN) + *enabled = 1; + + if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A16) { + granularity = 0x10; + *aspace |= VME_A16; + } + if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A24) { + granularity = 0x1000; + *aspace |= VME_A24; + } + if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A32) { + granularity = 0x10000; + *aspace |= VME_A32; + } + if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A64) { + granularity = 0x10000; + *aspace |= VME_A64; + } + + /* Need granularity before we set the size */ + *size = (unsigned long long)((vme_bound - *vme_base) + granularity); + + + if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_160) + *cycle |= VME_2eSST160; + if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_267) + *cycle |= VME_2eSST267; + if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_320) + *cycle |= VME_2eSST320; + + if (ctl & TSI148_LCSR_ITAT_BLT) + *cycle |= VME_BLT; + if (ctl & TSI148_LCSR_ITAT_MBLT) + *cycle |= VME_MBLT; + if (ctl & TSI148_LCSR_ITAT_2eVME) + *cycle |= VME_2eVME; + if (ctl & TSI148_LCSR_ITAT_2eSST) + *cycle |= VME_2eSST; + if (ctl & TSI148_LCSR_ITAT_2eSSTB) + *cycle |= VME_2eSSTB; + + if (ctl & TSI148_LCSR_ITAT_SUPR) + *cycle |= VME_SUPER; + if (ctl & TSI148_LCSR_ITAT_NPRIV) + *cycle |= VME_USER; + if (ctl & TSI148_LCSR_ITAT_PGM) + *cycle |= VME_PROG; + if (ctl & TSI148_LCSR_ITAT_DATA) + *cycle |= VME_DATA; + + return 0; +} + +/* + * Allocate and map PCI Resource + */ +static int tsi148_alloc_resource(struct vme_master_resource *image, + unsigned long long size) +{ + unsigned long long existing_size; + int retval = 0; + struct pci_dev *pdev; + + /* Find pci_dev container of dev */ + if (tsi148_bridge->parent == NULL) { + printk("Dev entry NULL\n"); + return -EINVAL; + } + pdev = container_of(tsi148_bridge->parent, struct pci_dev, dev); + + existing_size = (unsigned long long)(image->pci_resource.end - + image->pci_resource.start); + + /* If the existing size is OK, return */ + if (existing_size == (size - 1)) + return 0; + + if (existing_size != 0) { + iounmap(image->kern_base); + image->kern_base = NULL; + if (image->pci_resource.name != NULL) + kfree(image->pci_resource.name); + release_resource(&(image->pci_resource)); + memset(&(image->pci_resource), 0, sizeof(struct resource)); + } + + if (image->pci_resource.name == NULL) { + image->pci_resource.name = kmalloc(VMENAMSIZ+3, GFP_KERNEL); + if (image->pci_resource.name == NULL) { + printk(KERN_ERR "Unable to allocate memory for resource" + " name\n"); + retval = -ENOMEM; + goto err_name; + } + } + + sprintf((char *)image->pci_resource.name, "%s.%d", tsi148_bridge->name, + image->number); + + image->pci_resource.start = 0; + image->pci_resource.end = (unsigned long)size; + image->pci_resource.flags = IORESOURCE_MEM; + + retval = pci_bus_alloc_resource(pdev->bus, + &(image->pci_resource), size, size, PCIBIOS_MIN_MEM, + 0, NULL, NULL); + if (retval) { + printk(KERN_ERR "Failed to allocate mem resource for " + "window %d size 0x%lx start 0x%lx\n", + image->number, (unsigned long)size, + (unsigned long)image->pci_resource.start); + goto err_resource; + } + + image->kern_base = ioremap_nocache( + image->pci_resource.start, size); + if (image->kern_base == NULL) { + printk(KERN_ERR "Failed to remap resource\n"); + retval = -ENOMEM; + goto err_remap; + } + + return 0; + + iounmap(image->kern_base); + image->kern_base = NULL; +err_remap: + release_resource(&(image->pci_resource)); +err_resource: + kfree(image->pci_resource.name); + memset(&(image->pci_resource), 0, sizeof(struct resource)); +err_name: + return retval; +} + +/* + * Free and unmap PCI Resource + */ +static void tsi148_free_resource(struct vme_master_resource *image) +{ + iounmap(image->kern_base); + image->kern_base = NULL; + release_resource(&(image->pci_resource)); + kfree(image->pci_resource.name); + memset(&(image->pci_resource), 0, sizeof(struct resource)); +} + +/* + * Set the attributes of an outbound window. + */ +int tsi148_master_set( struct vme_master_resource *image, int enabled, + unsigned long long vme_base, unsigned long long size, + vme_address_t aspace, vme_cycle_t cycle, vme_width_t dwidth) +{ + int retval = 0; + unsigned int i; + unsigned int temp_ctl = 0; + unsigned int pci_base_low, pci_base_high; + unsigned int pci_bound_low, pci_bound_high; + unsigned int vme_offset_low, vme_offset_high; + unsigned long long pci_bound, vme_offset, pci_base; + + /* Verify input data */ + if (vme_base & 0xFFFF) { + printk("Invalid VME Window alignment\n"); + retval = -EINVAL; + goto err_window; + } + if (size < 0x10000) { + printk("Invalid VME Window size\n"); + retval = -EINVAL; + goto err_window; + } + + spin_lock(&(image->lock)); + + /* Let's allocate the resource here rather than further up the stack as + * it avoids pushing loads of bus dependant stuff up the stack + */ + retval = tsi148_alloc_resource(image, size); + if (retval) { + spin_unlock(&(image->lock)); + printk(KERN_ERR "Unable to allocate memory for resource " + "name\n"); + retval = -ENOMEM; + goto err_res; + } + + pci_base = (unsigned long long)image->pci_resource.start; + + + /* + * Bound address is a valid address for the window, adjust + * according to window granularity. + */ + pci_bound = pci_base + (size - 0x10000); + vme_offset = vme_base - pci_base; + + /* Convert 64-bit variables to 2x 32-bit variables */ + reg_split(pci_base, &pci_base_high, &pci_base_low); + reg_split(pci_bound, &pci_bound_high, &pci_bound_low); + reg_split(vme_offset, &vme_offset_high, &vme_offset_low); + + if (pci_base_low & 0xFFFF) { + spin_unlock(&(image->lock)); + printk("Invalid PCI base alignment\n"); + retval = -EINVAL; + goto err_gran; + } + if (pci_bound_low & 0xFFFF) { + spin_unlock(&(image->lock)); + printk("Invalid PCI bound alignment\n"); + retval = -EINVAL; + goto err_gran; + } + if (vme_offset_low & 0xFFFF) { + spin_unlock(&(image->lock)); + printk("Invalid VME Offset alignment\n"); + retval = -EINVAL; + goto err_gran; + } + + i = image->number; + + /* Disable while we are mucking around */ + temp_ctl = ioread32be(tsi148_bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTAT); + temp_ctl &= ~TSI148_LCSR_OTAT_EN; + iowrite32be(temp_ctl, tsi148_bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTAT); + +/* XXX Prefetch stuff currently unsupported */ +#if 0 + if (vmeOut->prefetchEnable) { + temp_ctl |= 0x40000; + for (x = 0; x < 4; x++) { + if ((2 << x) >= vmeOut->prefetchSize) + break; + } + if (x == 4) + x = 3; + temp_ctl |= (x << 16); + } +#endif + + /* Setup 2eSST speeds */ + temp_ctl &= ~TSI148_LCSR_OTAT_2eSSTM_M; + switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { + case VME_2eSST160: + temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_160; + break; + case VME_2eSST267: + temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_267; + break; + case VME_2eSST320: + temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_320; + break; + } + + /* Setup cycle types */ + if (cycle & VME_BLT) { + temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; + temp_ctl |= TSI148_LCSR_OTAT_TM_BLT; + } + if (cycle & VME_MBLT) { + temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; + temp_ctl |= TSI148_LCSR_OTAT_TM_MBLT; + } + if (cycle & VME_2eVME) { + temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; + temp_ctl |= TSI148_LCSR_OTAT_TM_2eVME; + } + if (cycle & VME_2eSST) { + temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; + temp_ctl |= TSI148_LCSR_OTAT_TM_2eSST; + } + if (cycle & VME_2eSSTB) { + printk("Currently not setting Broadcast Select Registers\n"); + temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; + temp_ctl |= TSI148_LCSR_OTAT_TM_2eSSTB; + } + + /* Setup data width */ + temp_ctl &= ~TSI148_LCSR_OTAT_DBW_M; + switch (dwidth) { + case VME_D16: + temp_ctl |= TSI148_LCSR_OTAT_DBW_16; + break; + case VME_D32: + temp_ctl |= TSI148_LCSR_OTAT_DBW_32; + break; + default: + spin_unlock(&(image->lock)); + printk("Invalid data width\n"); + retval = -EINVAL; + goto err_dwidth; + } + + /* Setup address space */ + temp_ctl &= ~TSI148_LCSR_OTAT_AMODE_M; + switch (aspace) { + case VME_A16: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_A16; + break; + case VME_A24: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_A24; + break; + case VME_A32: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_A32; + break; + case VME_A64: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_A64; + break; + case VME_CRCSR: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_CRCSR; + break; + case VME_USER1: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER1; + break; + case VME_USER2: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER2; + break; + case VME_USER3: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER3; + break; + case VME_USER4: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER4; + break; + default: + spin_unlock(&(image->lock)); + printk("Invalid address space\n"); + retval = -EINVAL; + goto err_aspace; + break; + } + + temp_ctl &= ~(3<<4); + if (cycle & VME_SUPER) + temp_ctl |= TSI148_LCSR_OTAT_SUP; + if (cycle & VME_PROG) + temp_ctl |= TSI148_LCSR_OTAT_PGM; + + /* Setup mapping */ + iowrite32be(pci_base_high, tsi148_bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTSAU); + iowrite32be(pci_base_low, tsi148_bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTSAL); + iowrite32be(pci_bound_high, tsi148_bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTEAU); + iowrite32be(pci_bound_low, tsi148_bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTEAL); + iowrite32be(vme_offset_high, tsi148_bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTOFU); + iowrite32be(vme_offset_low, tsi148_bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTOFL); + +/* XXX We need to deal with OTBS */ +#if 0 + iowrite32be(vmeOut->bcastSelect2esst, tsi148_bridge->base + + TSI148_LCSR_OT[i] + TSI148_LCSR_OFFSET_OTBS); +#endif + + /* Write ctl reg without enable */ + iowrite32be(temp_ctl, tsi148_bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTAT); + + if (enabled) + temp_ctl |= TSI148_LCSR_OTAT_EN; + + iowrite32be(temp_ctl, tsi148_bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTAT); + + spin_unlock(&(image->lock)); + return 0; + +err_aspace: +err_dwidth: +err_gran: + tsi148_free_resource(image); +err_res: +err_window: + return retval; + +} + +/* + * Set the attributes of an outbound window. + * + * XXX Not parsing prefetch information. + */ +int __tsi148_master_get( struct vme_master_resource *image, int *enabled, + unsigned long long *vme_base, unsigned long long *size, + vme_address_t *aspace, vme_cycle_t *cycle, vme_width_t *dwidth) +{ + unsigned int i, ctl; + unsigned int pci_base_low, pci_base_high; + unsigned int pci_bound_low, pci_bound_high; + unsigned int vme_offset_low, vme_offset_high; + + unsigned long long pci_base, pci_bound, vme_offset; + + i = image->number; + + ctl = ioread32be(tsi148_bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTAT); + + pci_base_high = ioread32be(tsi148_bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTSAU); + pci_base_low = ioread32be(tsi148_bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTSAL); + pci_bound_high = ioread32be(tsi148_bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTEAU); + pci_bound_low = ioread32be(tsi148_bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTEAL); + vme_offset_high = ioread32be(tsi148_bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTOFU); + vme_offset_low = ioread32be(tsi148_bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTOFL); + + /* Convert 64-bit variables to 2x 32-bit variables */ + reg_join(pci_base_high, pci_base_low, &pci_base); + reg_join(pci_bound_high, pci_bound_low, &pci_bound); + reg_join(vme_offset_high, vme_offset_low, &vme_offset); + + *vme_base = pci_base + vme_offset; + *size = (unsigned long long)(pci_bound - pci_base) + 0x10000; + + *enabled = 0; + *aspace = 0; + *cycle = 0; + *dwidth = 0; + + if (ctl & TSI148_LCSR_OTAT_EN) + *enabled = 1; + + /* Setup address space */ + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A16) + *aspace |= VME_A16; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A24) + *aspace |= VME_A24; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A32) + *aspace |= VME_A32; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A64) + *aspace |= VME_A64; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_CRCSR) + *aspace |= VME_CRCSR; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER1) + *aspace |= VME_USER1; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER2) + *aspace |= VME_USER2; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER3) + *aspace |= VME_USER3; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER4) + *aspace |= VME_USER4; + + /* Setup 2eSST speeds */ + if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_160) + *cycle |= VME_2eSST160; + if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_267) + *cycle |= VME_2eSST267; + if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_320) + *cycle |= VME_2eSST320; + + /* Setup cycle types */ + if ((ctl & TSI148_LCSR_OTAT_TM_M ) == TSI148_LCSR_OTAT_TM_SCT) + *cycle |= VME_SCT; + if ((ctl & TSI148_LCSR_OTAT_TM_M ) == TSI148_LCSR_OTAT_TM_BLT) + *cycle |= VME_BLT; + if ((ctl & TSI148_LCSR_OTAT_TM_M ) == TSI148_LCSR_OTAT_TM_MBLT) + *cycle |= VME_MBLT; + if ((ctl & TSI148_LCSR_OTAT_TM_M ) == TSI148_LCSR_OTAT_TM_2eVME) + *cycle |= VME_2eVME; + if ((ctl & TSI148_LCSR_OTAT_TM_M ) == TSI148_LCSR_OTAT_TM_2eSST) + *cycle |= VME_2eSST; + if ((ctl & TSI148_LCSR_OTAT_TM_M ) == TSI148_LCSR_OTAT_TM_2eSSTB) + *cycle |= VME_2eSSTB; + + if (ctl & TSI148_LCSR_OTAT_SUP) + *cycle |= VME_SUPER; + else + *cycle |= VME_USER; + + if (ctl & TSI148_LCSR_OTAT_PGM) + *cycle |= VME_PROG; + else + *cycle |= VME_DATA; + + /* Setup data width */ + if ((ctl & TSI148_LCSR_OTAT_DBW_M) == TSI148_LCSR_OTAT_DBW_16) + *dwidth = VME_D16; + if ((ctl & TSI148_LCSR_OTAT_DBW_M) == TSI148_LCSR_OTAT_DBW_32) + *dwidth = VME_D32; + + return 0; +} + + +int tsi148_master_get( struct vme_master_resource *image, int *enabled, + unsigned long long *vme_base, unsigned long long *size, + vme_address_t *aspace, vme_cycle_t *cycle, vme_width_t *dwidth) +{ + int retval; + + spin_lock(&(image->lock)); + + retval = __tsi148_master_get(image, enabled, vme_base, size, aspace, + cycle, dwidth); + + spin_unlock(&(image->lock)); + + return retval; +} + +ssize_t tsi148_master_read(struct vme_master_resource *image, void *buf, + size_t count, loff_t offset) +{ + int retval, enabled; + unsigned long long vme_base, size; + vme_address_t aspace; + vme_cycle_t cycle; + vme_width_t dwidth; + struct vme_bus_error *vme_err = NULL; + + spin_lock(&(image->lock)); + + memcpy_fromio(buf, image->kern_base + offset, (unsigned int)count); + retval = count; + + if (!err_chk) + goto skip_chk; + + __tsi148_master_get(image, &enabled, &vme_base, &size, &aspace, &cycle, + &dwidth); + + vme_err = tsi148_find_error(aspace, vme_base + offset, count); + if(vme_err != NULL) { + dev_err(image->parent->parent, "First VME read error detected " + "an at address 0x%llx\n", vme_err->address); + retval = vme_err->address - (vme_base + offset); + /* Clear down save errors in this address range */ + tsi148_clear_errors(aspace, vme_base + offset, count); + } + +skip_chk: + spin_unlock(&(image->lock)); + + return retval; +} + + +/* XXX We need to change vme_master_resource->mtx to a spinlock so that read + * and write functions can be used in an interrupt context + */ +ssize_t tsi148_master_write(struct vme_master_resource *image, void *buf, + size_t count, loff_t offset) +{ + int retval = 0, enabled; + unsigned long long vme_base, size; + vme_address_t aspace; + vme_cycle_t cycle; + vme_width_t dwidth; + + struct vme_bus_error *vme_err = NULL; + + spin_lock(&(image->lock)); + + memcpy_toio(image->kern_base + offset, buf, (unsigned int)count); + retval = count; + + /* + * Writes are posted. We need to do a read on the VME bus to flush out + * all of the writes before we check for errors. We can't guarentee + * that reading the data we have just written is safe. It is believed + * that there isn't any read, write re-ordering, so we can read any + * location in VME space, so lets read the Device ID from the tsi148's + * own registers as mapped into CR/CSR space. + * + * We check for saved errors in the written address range/space. + */ + + if (!err_chk) + goto skip_chk; + + /* + * Get window info first, to maximise the time that the buffers may + * fluch on their own + */ + __tsi148_master_get(image, &enabled, &vme_base, &size, &aspace, &cycle, + &dwidth); + + ioread16(flush_image->kern_base + 0x7F000); + + vme_err = tsi148_find_error(aspace, vme_base + offset, count); + if(vme_err != NULL) { + printk("First VME write error detected an at address 0x%llx\n", + vme_err->address); + retval = vme_err->address - (vme_base + offset); + /* Clear down save errors in this address range */ + tsi148_clear_errors(aspace, vme_base + offset, count); + } + +skip_chk: + spin_unlock(&(image->lock)); + + return retval; +} + +/* + * Perform an RMW cycle on the VME bus. + * + * Requires a previously configured master window, returns final value. + */ +unsigned int tsi148_master_rmw(struct vme_master_resource *image, + unsigned int mask, unsigned int compare, unsigned int swap, + loff_t offset) +{ + unsigned long long pci_addr; + unsigned int pci_addr_high, pci_addr_low; + u32 tmp, result; + int i; + + + /* Find the PCI address that maps to the desired VME address */ + i = image->number; + + /* Locking as we can only do one of these at a time */ + mutex_lock(&(vme_rmw)); + + /* Lock image */ + spin_lock(&(image->lock)); + + pci_addr_high = ioread32be(tsi148_bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTSAU); + pci_addr_low = ioread32be(tsi148_bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTSAL); + + reg_join(pci_addr_high, pci_addr_low, &pci_addr); + reg_split(pci_addr + offset, &pci_addr_high, &pci_addr_low); + + /* Configure registers */ + iowrite32be(mask, tsi148_bridge->base + TSI148_LCSR_RMWEN); + iowrite32be(compare, tsi148_bridge->base + TSI148_LCSR_RMWC); + iowrite32be(swap, tsi148_bridge->base + TSI148_LCSR_RMWS); + iowrite32be(pci_addr_high, tsi148_bridge->base + TSI148_LCSR_RMWAU); + iowrite32be(pci_addr_low, tsi148_bridge->base + TSI148_LCSR_RMWAL); + + /* Enable RMW */ + tmp = ioread32be(tsi148_bridge->base + TSI148_LCSR_VMCTRL); + tmp |= TSI148_LCSR_VMCTRL_RMWEN; + iowrite32be(tmp, tsi148_bridge->base + TSI148_LCSR_VMCTRL); + + /* Kick process off with a read to the required address. */ + result = ioread32be(image->kern_base + offset); + + /* Disable RMW */ + tmp = ioread32be(tsi148_bridge->base + TSI148_LCSR_VMCTRL); + tmp &= ~TSI148_LCSR_VMCTRL_RMWEN; + iowrite32be(tmp, tsi148_bridge->base + TSI148_LCSR_VMCTRL); + + spin_unlock(&(image->lock)); + + mutex_unlock(&(vme_rmw)); + + return result; +} + +static int tsi148_dma_set_vme_src_attributes (u32 *attr, vme_address_t aspace, + vme_cycle_t cycle, vme_width_t dwidth) +{ + /* Setup 2eSST speeds */ + switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { + case VME_2eSST160: + *attr |= TSI148_LCSR_DSAT_2eSSTM_160; + break; + case VME_2eSST267: + *attr |= TSI148_LCSR_DSAT_2eSSTM_267; + break; + case VME_2eSST320: + *attr |= TSI148_LCSR_DSAT_2eSSTM_320; + break; + } + + /* Setup cycle types */ + if (cycle & VME_SCT) { + *attr |= TSI148_LCSR_DSAT_TM_SCT; + } + if (cycle & VME_BLT) { + *attr |= TSI148_LCSR_DSAT_TM_BLT; + } + if (cycle & VME_MBLT) { + *attr |= TSI148_LCSR_DSAT_TM_MBLT; + } + if (cycle & VME_2eVME) { + *attr |= TSI148_LCSR_DSAT_TM_2eVME; + } + if (cycle & VME_2eSST) { + *attr |= TSI148_LCSR_DSAT_TM_2eSST; + } + if (cycle & VME_2eSSTB) { + printk("Currently not setting Broadcast Select Registers\n"); + *attr |= TSI148_LCSR_DSAT_TM_2eSSTB; + } + + /* Setup data width */ + switch (dwidth) { + case VME_D16: + *attr |= TSI148_LCSR_DSAT_DBW_16; + break; + case VME_D32: + *attr |= TSI148_LCSR_DSAT_DBW_32; + break; + default: + printk("Invalid data width\n"); + return -EINVAL; + } + + /* Setup address space */ + switch (aspace) { + case VME_A16: + *attr |= TSI148_LCSR_DSAT_AMODE_A16; + break; + case VME_A24: + *attr |= TSI148_LCSR_DSAT_AMODE_A24; + break; + case VME_A32: + *attr |= TSI148_LCSR_DSAT_AMODE_A32; + break; + case VME_A64: + *attr |= TSI148_LCSR_DSAT_AMODE_A64; + break; + case VME_CRCSR: + *attr |= TSI148_LCSR_DSAT_AMODE_CRCSR; + break; + case VME_USER1: + *attr |= TSI148_LCSR_DSAT_AMODE_USER1; + break; + case VME_USER2: + *attr |= TSI148_LCSR_DSAT_AMODE_USER2; + break; + case VME_USER3: + *attr |= TSI148_LCSR_DSAT_AMODE_USER3; + break; + case VME_USER4: + *attr |= TSI148_LCSR_DSAT_AMODE_USER4; + break; + default: + printk("Invalid address space\n"); + return -EINVAL; + break; + } + + if (cycle & VME_SUPER) + *attr |= TSI148_LCSR_DSAT_SUP; + if (cycle & VME_PROG) + *attr |= TSI148_LCSR_DSAT_PGM; + + return 0; +} + +static int tsi148_dma_set_vme_dest_attributes(u32 *attr, vme_address_t aspace, + vme_cycle_t cycle, vme_width_t dwidth) +{ + /* Setup 2eSST speeds */ + switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { + case VME_2eSST160: + *attr |= TSI148_LCSR_DDAT_2eSSTM_160; + break; + case VME_2eSST267: + *attr |= TSI148_LCSR_DDAT_2eSSTM_267; + break; + case VME_2eSST320: + *attr |= TSI148_LCSR_DDAT_2eSSTM_320; + break; + } + + /* Setup cycle types */ + if (cycle & VME_SCT) { + *attr |= TSI148_LCSR_DDAT_TM_SCT; + } + if (cycle & VME_BLT) { + *attr |= TSI148_LCSR_DDAT_TM_BLT; + } + if (cycle & VME_MBLT) { + *attr |= TSI148_LCSR_DDAT_TM_MBLT; + } + if (cycle & VME_2eVME) { + *attr |= TSI148_LCSR_DDAT_TM_2eVME; + } + if (cycle & VME_2eSST) { + *attr |= TSI148_LCSR_DDAT_TM_2eSST; + } + if (cycle & VME_2eSSTB) { + printk("Currently not setting Broadcast Select Registers\n"); + *attr |= TSI148_LCSR_DDAT_TM_2eSSTB; + } + + /* Setup data width */ + switch (dwidth) { + case VME_D16: + *attr |= TSI148_LCSR_DDAT_DBW_16; + break; + case VME_D32: + *attr |= TSI148_LCSR_DDAT_DBW_32; + break; + default: + printk("Invalid data width\n"); + return -EINVAL; + } + + /* Setup address space */ + switch (aspace) { + case VME_A16: + *attr |= TSI148_LCSR_DDAT_AMODE_A16; + break; + case VME_A24: + *attr |= TSI148_LCSR_DDAT_AMODE_A24; + break; + case VME_A32: + *attr |= TSI148_LCSR_DDAT_AMODE_A32; + break; + case VME_A64: + *attr |= TSI148_LCSR_DDAT_AMODE_A64; + break; + case VME_CRCSR: + *attr |= TSI148_LCSR_DDAT_AMODE_CRCSR; + break; + case VME_USER1: + *attr |= TSI148_LCSR_DDAT_AMODE_USER1; + break; + case VME_USER2: + *attr |= TSI148_LCSR_DDAT_AMODE_USER2; + break; + case VME_USER3: + *attr |= TSI148_LCSR_DDAT_AMODE_USER3; + break; + case VME_USER4: + *attr |= TSI148_LCSR_DDAT_AMODE_USER4; + break; + default: + printk("Invalid address space\n"); + return -EINVAL; + break; + } + + if (cycle & VME_SUPER) + *attr |= TSI148_LCSR_DDAT_SUP; + if (cycle & VME_PROG) + *attr |= TSI148_LCSR_DDAT_PGM; + + return 0; +} + +/* + * Add a link list descriptor to the list + * + * XXX Need to handle 2eSST Broadcast select bits + */ +int tsi148_dma_list_add (struct vme_dma_list *list, struct vme_dma_attr *src, + struct vme_dma_attr *dest, size_t count) +{ + struct tsi148_dma_entry *entry, *prev; + u32 address_high, address_low; + struct vme_dma_pattern *pattern_attr; + struct vme_dma_pci *pci_attr; + struct vme_dma_vme *vme_attr; + dma_addr_t desc_ptr; + int retval = 0; + + /* XXX descriptor must be aligned on 64-bit boundaries */ + entry = (struct tsi148_dma_entry *)kmalloc( + sizeof(struct tsi148_dma_entry), GFP_KERNEL); + if (entry == NULL) { + printk("Failed to allocate memory for dma resource " + "structure\n"); + retval = -ENOMEM; + goto err_mem; + } + + /* Test descriptor alignment */ + if ((unsigned long)&(entry->descriptor) & 0x7) { + printk("Descriptor not aligned to 8 byte boundary as " + "required: %p\n", &(entry->descriptor)); + retval = -EINVAL; + goto err_align; + } + + /* Given we are going to fill out the structure, we probably don't + * need to zero it, but better safe than sorry for now. + */ + memset(&(entry->descriptor), 0, sizeof(struct tsi148_dma_descriptor)); + + /* Fill out source part */ + switch (src->type) { + case VME_DMA_PATTERN: + pattern_attr = (struct vme_dma_pattern *)src->private; + + entry->descriptor.dsal = pattern_attr->pattern; + entry->descriptor.dsat = TSI148_LCSR_DSAT_TYP_PAT; + /* Default behaviour is 32 bit pattern */ + if (pattern_attr->type & VME_DMA_PATTERN_BYTE) { + entry->descriptor.dsat |= TSI148_LCSR_DSAT_PSZ; + } + /* It seems that the default behaviour is to increment */ + if ((pattern_attr->type & VME_DMA_PATTERN_INCREMENT) == 0) { + entry->descriptor.dsat |= TSI148_LCSR_DSAT_NIN; + } + break; + case VME_DMA_PCI: + pci_attr = (struct vme_dma_pci *)src->private; + + reg_split((unsigned long long)pci_attr->address, &address_high, + &address_low); + entry->descriptor.dsau = address_high; + entry->descriptor.dsal = address_low; + entry->descriptor.dsat = TSI148_LCSR_DSAT_TYP_PCI; + break; + case VME_DMA_VME: + vme_attr = (struct vme_dma_vme *)src->private; + + reg_split((unsigned long long)vme_attr->address, &address_high, + &address_low); + entry->descriptor.dsau = address_high; + entry->descriptor.dsal = address_low; + entry->descriptor.dsat = TSI148_LCSR_DSAT_TYP_VME; + + retval = tsi148_dma_set_vme_src_attributes( + &(entry->descriptor.dsat), vme_attr->aspace, + vme_attr->cycle, vme_attr->dwidth); + if(retval < 0 ) + goto err_source; + break; + default: + printk("Invalid source type\n"); + retval = -EINVAL; + goto err_source; + break; + } + + /* Assume last link - this will be over-written by adding another */ + entry->descriptor.dnlau = 0; + entry->descriptor.dnlal = TSI148_LCSR_DNLAL_LLA; + + + /* Fill out destination part */ + switch (dest->type) { + case VME_DMA_PCI: + pci_attr = (struct vme_dma_pci *)dest->private; + + reg_split((unsigned long long)pci_attr->address, &address_high, + &address_low); + entry->descriptor.ddau = address_high; + entry->descriptor.ddal = address_low; + entry->descriptor.ddat = TSI148_LCSR_DDAT_TYP_PCI; + break; + case VME_DMA_VME: + vme_attr = (struct vme_dma_vme *)dest->private; + + reg_split((unsigned long long)vme_attr->address, &address_high, + &address_low); + entry->descriptor.ddau = address_high; + entry->descriptor.ddal = address_low; + entry->descriptor.ddat = TSI148_LCSR_DDAT_TYP_VME; + + retval = tsi148_dma_set_vme_dest_attributes( + &(entry->descriptor.ddat), vme_attr->aspace, + vme_attr->cycle, vme_attr->dwidth); + if(retval < 0 ) + goto err_dest; + break; + default: + printk("Invalid destination type\n"); + retval = -EINVAL; + goto err_dest; + break; + } + + /* Fill out count */ + entry->descriptor.dcnt = (u32)count; + + /* Add to list */ + list_add_tail(&(entry->list), &(list->entries)); + + /* Fill out previous descriptors "Next Address" */ + if(entry->list.prev != &(list->entries)){ + prev = list_entry(entry->list.prev, struct tsi148_dma_entry, + list); + /* We need the bus address for the pointer */ + desc_ptr = virt_to_bus(&(entry->descriptor)); + reg_split(desc_ptr, &(prev->descriptor.dnlau), + &(prev->descriptor.dnlal)); + } + + return 0; + +err_dest: +err_source: +err_align: + kfree(entry); +err_mem: + return retval; +} + +/* + * Check to see if the provided DMA channel is busy. + */ +static int tsi148_dma_busy(int channel) +{ + u32 tmp; + + tmp = ioread32be(tsi148_bridge->base + TSI148_LCSR_DMA[channel] + + TSI148_LCSR_OFFSET_DSTA); + + if (tmp & TSI148_LCSR_DSTA_BSY) + return 0; + else + return 1; + +} + +/* + * Execute a previously generated link list + * + * XXX Need to provide control register configuration. + */ +int tsi148_dma_list_exec(struct vme_dma_list *list) +{ + struct vme_dma_resource *ctrlr; + int channel, retval = 0; + struct tsi148_dma_entry *entry; + dma_addr_t bus_addr; + u32 bus_addr_high, bus_addr_low; + u32 val, dctlreg = 0; +#if 0 + int x; +#endif + + ctrlr = list->parent; + + mutex_lock(&(ctrlr->mtx)); + + channel = ctrlr->number; + + if (! list_empty(&(ctrlr->running))) { + /* + * XXX We have an active DMA transfer and currently haven't + * sorted out the mechanism for "pending" DMA transfers. + * Return busy. + */ + /* Need to add to pending here */ + mutex_unlock(&(ctrlr->mtx)); + return -EBUSY; + } else { + list_add(&(list->list), &(ctrlr->running)); + } +#if 0 + /* XXX Still todo */ + for (x = 0; x < 8; x++) { /* vme block size */ + if ((32 << x) >= vmeDma->maxVmeBlockSize) { + break; + } + } + if (x == 8) + x = 7; + dctlreg |= (x << 12); + + for (x = 0; x < 8; x++) { /* pci block size */ + if ((32 << x) >= vmeDma->maxPciBlockSize) { + break; + } + } + if (x == 8) + x = 7; + dctlreg |= (x << 4); + + if (vmeDma->vmeBackOffTimer) { + for (x = 1; x < 8; x++) { /* vme timer */ + if ((1 << (x - 1)) >= vmeDma->vmeBackOffTimer) { + break; + } + } + if (x == 8) + x = 7; + dctlreg |= (x << 8); + } + + if (vmeDma->pciBackOffTimer) { + for (x = 1; x < 8; x++) { /* pci timer */ + if ((1 << (x - 1)) >= vmeDma->pciBackOffTimer) { + break; + } + } + if (x == 8) + x = 7; + dctlreg |= (x << 0); + } +#endif + + /* Get first bus address and write into registers */ + entry = list_first_entry(&(list->entries), struct tsi148_dma_entry, + list); + + bus_addr = virt_to_bus(&(entry->descriptor)); + + mutex_unlock(&(ctrlr->mtx)); + + reg_split(bus_addr, &bus_addr_high, &bus_addr_low); + + iowrite32be(bus_addr_high, tsi148_bridge->base + + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DNLAU); + iowrite32be(bus_addr_low, tsi148_bridge->base + + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DNLAL); + + /* Start the operation */ + iowrite32be(dctlreg | TSI148_LCSR_DCTL_DGO, tsi148_bridge->base + + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DCTL); + + wait_event_interruptible(dma_queue[channel], tsi148_dma_busy(channel)); + /* + * Read status register, this register is valid until we kick off a + * new transfer. + */ + val = ioread32be(tsi148_bridge->base + TSI148_LCSR_DMA[channel] + + TSI148_LCSR_OFFSET_DSTA); + + if (val & TSI148_LCSR_DSTA_VBE) { + printk(KERN_ERR "tsi148: DMA Error. DSTA=%08X\n", val); + retval = -EIO; + } + + /* Remove list from running list */ + mutex_lock(&(ctrlr->mtx)); + list_del(&(list->list)); + mutex_unlock(&(ctrlr->mtx)); + + return retval; +} + +/* + * Clean up a previously generated link list + * + * We have a separate function, don't assume that the chain can't be reused. + */ +int tsi148_dma_list_empty(struct vme_dma_list *list) +{ + struct list_head *pos, *temp; + struct tsi148_dma_entry *entry; + + /* detach and free each entry */ + list_for_each_safe(pos, temp, &(list->entries)) { + list_del(pos); + entry = list_entry(pos, struct tsi148_dma_entry, list); + kfree(entry); + } + + return (0); +} + +/* + * All 4 location monitors reside at the same base - this is therefore a + * system wide configuration. + * + * This does not enable the LM monitor - that should be done when the first + * callback is attached and disabled when the last callback is removed. + */ +int tsi148_lm_set(struct vme_lm_resource *lm, unsigned long long lm_base, + vme_address_t aspace, vme_cycle_t cycle) +{ + u32 lm_base_high, lm_base_low, lm_ctl = 0; + int i; + + mutex_lock(&(lm->mtx)); + + /* If we already have a callback attached, we can't move it! */ + for (i = 0; i < lm->monitors; i++) { + if(lm_callback[i] != NULL) { + mutex_unlock(&(lm->mtx)); + printk("Location monitor callback attached, can't " + "reset\n"); + return -EBUSY; + } + } + + switch (aspace) { + case VME_A16: + lm_ctl |= TSI148_LCSR_LMAT_AS_A16; + break; + case VME_A24: + lm_ctl |= TSI148_LCSR_LMAT_AS_A24; + break; + case VME_A32: + lm_ctl |= TSI148_LCSR_LMAT_AS_A32; + break; + case VME_A64: + lm_ctl |= TSI148_LCSR_LMAT_AS_A64; + break; + default: + mutex_unlock(&(lm->mtx)); + printk("Invalid address space\n"); + return -EINVAL; + break; + } + + if (cycle & VME_SUPER) + lm_ctl |= TSI148_LCSR_LMAT_SUPR ; + if (cycle & VME_USER) + lm_ctl |= TSI148_LCSR_LMAT_NPRIV; + if (cycle & VME_PROG) + lm_ctl |= TSI148_LCSR_LMAT_PGM; + if (cycle & VME_DATA) + lm_ctl |= TSI148_LCSR_LMAT_DATA; + + reg_split(lm_base, &lm_base_high, &lm_base_low); + + iowrite32be(lm_base_high, tsi148_bridge->base + TSI148_LCSR_LMBAU); + iowrite32be(lm_base_low, tsi148_bridge->base + TSI148_LCSR_LMBAL); + iowrite32be(lm_ctl, tsi148_bridge->base + TSI148_LCSR_LMAT); + + mutex_unlock(&(lm->mtx)); + + return 0; +} + +/* Get configuration of the callback monitor and return whether it is enabled + * or disabled. + */ +int tsi148_lm_get(struct vme_lm_resource *lm, unsigned long long *lm_base, + vme_address_t *aspace, vme_cycle_t *cycle) +{ + u32 lm_base_high, lm_base_low, lm_ctl, enabled = 0; + + mutex_lock(&(lm->mtx)); + + lm_base_high = ioread32be(tsi148_bridge->base + TSI148_LCSR_LMBAU); + lm_base_low = ioread32be(tsi148_bridge->base + TSI148_LCSR_LMBAL); + lm_ctl = ioread32be(tsi148_bridge->base + TSI148_LCSR_LMAT); + + reg_join(lm_base_high, lm_base_low, lm_base); + + if (lm_ctl & TSI148_LCSR_LMAT_EN) + enabled = 1; + + if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A16) { + *aspace |= VME_A16; + } + if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A24) { + *aspace |= VME_A24; + } + if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A32) { + *aspace |= VME_A32; + } + if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A64) { + *aspace |= VME_A64; + } + + if (lm_ctl & TSI148_LCSR_LMAT_SUPR) + *cycle |= VME_SUPER; + if (lm_ctl & TSI148_LCSR_LMAT_NPRIV) + *cycle |= VME_USER; + if (lm_ctl & TSI148_LCSR_LMAT_PGM) + *cycle |= VME_PROG; + if (lm_ctl & TSI148_LCSR_LMAT_DATA) + *cycle |= VME_DATA; + + mutex_unlock(&(lm->mtx)); + + return enabled; +} + +/* + * Attach a callback to a specific location monitor. + * + * Callback will be passed the monitor triggered. + */ +int tsi148_lm_attach(struct vme_lm_resource *lm, int monitor, + void (*callback)(int)) +{ + u32 lm_ctl, tmp; + + mutex_lock(&(lm->mtx)); + + /* Ensure that the location monitor is configured - need PGM or DATA */ + lm_ctl = ioread32be(tsi148_bridge->base + TSI148_LCSR_LMAT); + if ((lm_ctl & (TSI148_LCSR_LMAT_PGM | TSI148_LCSR_LMAT_DATA)) == 0) { + mutex_unlock(&(lm->mtx)); + printk("Location monitor not properly configured\n"); + return -EINVAL; + } + + /* Check that a callback isn't already attached */ + if (lm_callback[monitor] != NULL) { + mutex_unlock(&(lm->mtx)); + printk("Existing callback attached\n"); + return -EBUSY; + } + + /* Attach callback */ + lm_callback[monitor] = callback; + + /* Enable Location Monitor interrupt */ + tmp = ioread32be(tsi148_bridge->base + TSI148_LCSR_INTEN); + tmp |= TSI148_LCSR_INTEN_LMEN[monitor]; + iowrite32be(tmp, tsi148_bridge->base + TSI148_LCSR_INTEN); + + tmp = ioread32be(tsi148_bridge->base + TSI148_LCSR_INTEO); + tmp |= TSI148_LCSR_INTEO_LMEO[monitor]; + iowrite32be(tmp, tsi148_bridge->base + TSI148_LCSR_INTEO); + + /* Ensure that global Location Monitor Enable set */ + if ((lm_ctl & TSI148_LCSR_LMAT_EN) == 0) { + lm_ctl |= TSI148_LCSR_LMAT_EN; + iowrite32be(lm_ctl, tsi148_bridge->base + TSI148_LCSR_LMAT); + } + + mutex_unlock(&(lm->mtx)); + + return 0; +} + +/* + * Detach a callback function forn a specific location monitor. + */ +int tsi148_lm_detach(struct vme_lm_resource *lm, int monitor) +{ + u32 lm_en, tmp; + + mutex_lock(&(lm->mtx)); + + /* Disable Location Monitor and ensure previous interrupts are clear */ + lm_en = ioread32be(tsi148_bridge->base + TSI148_LCSR_INTEN); + lm_en &= ~TSI148_LCSR_INTEN_LMEN[monitor]; + iowrite32be(lm_en, tsi148_bridge->base + TSI148_LCSR_INTEN); + + tmp = ioread32be(tsi148_bridge->base + TSI148_LCSR_INTEO); + tmp &= ~TSI148_LCSR_INTEO_LMEO[monitor]; + iowrite32be(tmp, tsi148_bridge->base + TSI148_LCSR_INTEO); + + iowrite32be(TSI148_LCSR_INTC_LMC[monitor], + tsi148_bridge->base + TSI148_LCSR_INTEO); + + /* Detach callback */ + lm_callback[monitor] = NULL; + + /* If all location monitors disabled, disable global Location Monitor */ + if ((lm_en & (TSI148_LCSR_INTS_LM0S | TSI148_LCSR_INTS_LM1S | + TSI148_LCSR_INTS_LM2S | TSI148_LCSR_INTS_LM3S)) == 0) { + tmp = ioread32be(tsi148_bridge->base + TSI148_LCSR_LMAT); + tmp &= ~TSI148_LCSR_LMAT_EN; + iowrite32be(tmp, tsi148_bridge->base + TSI148_LCSR_LMAT); + } + + mutex_unlock(&(lm->mtx)); + + return 0; +} + +/* + * Determine Geographical Addressing + */ +int tsi148_slot_get(void) +{ + u32 slot = 0; + + slot = ioread32be(tsi148_bridge->base + TSI148_LCSR_VSTAT); + slot = slot & TSI148_LCSR_VSTAT_GA_M; + return (int)slot; +} + +static int __init tsi148_init(void) +{ + return pci_register_driver(&tsi148_driver); +} + +/* + * Configure CR/CSR space + * + * Access to the CR/CSR can be configured at power-up. The location of the + * CR/CSR registers in the CR/CSR address space is determined by the boards + * Auto-ID or Geographic address. This function ensures that the window is + * enabled at an offset consistent with the boards geopgraphic address. + * + * Each board has a 512kB window, with the highest 4kB being used for the + * boards registers, this means there is a fix length 508kB window which must + * be mapped onto PCI memory. + */ +static int tsi148_crcsr_init(struct pci_dev *pdev) +{ + u32 cbar, crat, vstat; + u32 crcsr_bus_high, crcsr_bus_low; + int retval; + + /* Allocate mem for CR/CSR image */ + crcsr_kernel = pci_alloc_consistent(pdev, VME_CRCSR_BUF_SIZE, + &crcsr_bus); + if (crcsr_kernel == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for CR/CSR " + "image\n"); + return -ENOMEM; + } + + memset(crcsr_kernel, 0, VME_CRCSR_BUF_SIZE); + + reg_split(crcsr_bus, &crcsr_bus_high, &crcsr_bus_low); + + iowrite32be(crcsr_bus_high, tsi148_bridge->base + TSI148_LCSR_CROU); + iowrite32be(crcsr_bus_low, tsi148_bridge->base + TSI148_LCSR_CROL); + + /* Ensure that the CR/CSR is configured at the correct offset */ + cbar = ioread32be(tsi148_bridge->base + TSI148_CBAR); + cbar = (cbar & TSI148_CRCSR_CBAR_M)>>3; + + vstat = tsi148_slot_get(); + + if (cbar != vstat) { + dev_info(&pdev->dev, "Setting CR/CSR offset\n"); + iowrite32be(cbar<<3, tsi148_bridge->base + TSI148_CBAR); + } + dev_info(&pdev->dev, "CR/CSR Offset: %d\n", cbar); + + crat = ioread32be(tsi148_bridge->base + TSI148_LCSR_CRAT); + if (crat & TSI148_LCSR_CRAT_EN) { + dev_info(&pdev->dev, "Enabling CR/CSR space\n"); + iowrite32be(crat | TSI148_LCSR_CRAT_EN, + tsi148_bridge->base + TSI148_LCSR_CRAT); + } else + dev_info(&pdev->dev, "CR/CSR already enabled\n"); + + /* If we want flushed, error-checked writes, set up a window + * over the CR/CSR registers. We read from here to safely flush + * through VME writes. + */ + if(err_chk) { + retval = tsi148_master_set(flush_image, 1, (vstat * 0x80000), + 0x80000, VME_CRCSR, VME_SCT, VME_D16); + if (retval) + dev_err(&pdev->dev, "Configuring flush image failed\n"); + } + + return 0; + +} + +static void tsi148_crcsr_exit(struct pci_dev *pdev) +{ + u32 crat; + + /* Turn off CR/CSR space */ + crat = ioread32be(tsi148_bridge->base + TSI148_LCSR_CRAT); + iowrite32be(crat & ~TSI148_LCSR_CRAT_EN, + tsi148_bridge->base + TSI148_LCSR_CRAT); + + /* Free image */ + iowrite32be(0, tsi148_bridge->base + TSI148_LCSR_CROU); + iowrite32be(0, tsi148_bridge->base + TSI148_LCSR_CROL); + + pci_free_consistent(pdev, VME_CRCSR_BUF_SIZE, crcsr_kernel, crcsr_bus); +} + +static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + int retval, i, master_num; + u32 data; + struct list_head *pos = NULL; + struct vme_master_resource *master_image; + struct vme_slave_resource *slave_image; + struct vme_dma_resource *dma_ctrlr; + struct vme_lm_resource *lm; + + /* If we want to support more than one of each bridge, we need to + * dynamically generate this so we get one per device + */ + tsi148_bridge = (struct vme_bridge *)kmalloc(sizeof(struct vme_bridge), + GFP_KERNEL); + if (tsi148_bridge == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for device " + "structure\n"); + retval = -ENOMEM; + goto err_struct; + } + + memset(tsi148_bridge, 0, sizeof(struct vme_bridge)); + + /* Enable the device */ + retval = pci_enable_device(pdev); + if (retval) { + dev_err(&pdev->dev, "Unable to enable device\n"); + goto err_enable; + } + + /* Map Registers */ + retval = pci_request_regions(pdev, driver_name); + if (retval) { + dev_err(&pdev->dev, "Unable to reserve resources\n"); + goto err_resource; + } + + /* map registers in BAR 0 */ + tsi148_bridge->base = ioremap_nocache(pci_resource_start(pdev, 0), 4096); + if (!tsi148_bridge->base) { + dev_err(&pdev->dev, "Unable to remap CRG region\n"); + retval = -EIO; + goto err_remap; + } + + /* Check to see if the mapping worked out */ + data = ioread32(tsi148_bridge->base + TSI148_PCFS_ID) & 0x0000FFFF; + if (data != PCI_VENDOR_ID_TUNDRA) { + dev_err(&pdev->dev, "CRG region check failed\n"); + retval = -EIO; + goto err_test; + } + + /* Initialize wait queues & mutual exclusion flags */ + /* XXX These need to be moved to the vme_bridge structure */ + init_waitqueue_head(&dma_queue[0]); + init_waitqueue_head(&dma_queue[1]); + init_waitqueue_head(&iack_queue); + mutex_init(&(vme_int)); + mutex_init(&(vme_irq)); + mutex_init(&(vme_rmw)); + + tsi148_bridge->parent = &(pdev->dev); + strcpy(tsi148_bridge->name, driver_name); + + /* Setup IRQ */ + retval = tsi148_irq_init(tsi148_bridge); + if (retval != 0) { + dev_err(&pdev->dev, "Chip Initialization failed.\n"); + goto err_irq; + } + + /* If we are going to flush writes, we need to read from the VME bus. + * We need to do this safely, thus we read the devices own CR/CSR + * register. To do this we must set up a window in CR/CSR space and + * hence have one less master window resource available. + */ + master_num = TSI148_MAX_MASTER; + if(err_chk){ + master_num--; + /* XXX */ + flush_image = (struct vme_master_resource *)kmalloc( + sizeof(struct vme_master_resource), GFP_KERNEL); + if (flush_image == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "flush resource structure\n"); + retval = -ENOMEM; + goto err_master; + } + flush_image->parent = tsi148_bridge; + spin_lock_init(&(flush_image->lock)); + flush_image->locked = 1; + flush_image->number = master_num; + flush_image->address_attr = VME_A16 | VME_A24 | VME_A32 | + VME_A64; + flush_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | + VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | + VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER | + VME_PROG | VME_DATA; + flush_image->width_attr = VME_D16 | VME_D32; + memset(&(flush_image->pci_resource), 0, + sizeof(struct resource)); + flush_image->kern_base = NULL; + } + + /* Add master windows to list */ + INIT_LIST_HEAD(&(tsi148_bridge->master_resources)); + for (i = 0; i < master_num; i++) { + master_image = (struct vme_master_resource *)kmalloc( + sizeof(struct vme_master_resource), GFP_KERNEL); + if (master_image == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "master resource structure\n"); + retval = -ENOMEM; + goto err_master; + } + master_image->parent = tsi148_bridge; + spin_lock_init(&(master_image->lock)); + master_image->locked = 0; + master_image->number = i; + master_image->address_attr = VME_A16 | VME_A24 | VME_A32 | + VME_A64; + master_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | + VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | + VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER | + VME_PROG | VME_DATA; + master_image->width_attr = VME_D16 | VME_D32; + memset(&(master_image->pci_resource), 0, + sizeof(struct resource)); + master_image->kern_base = NULL; + list_add_tail(&(master_image->list), + &(tsi148_bridge->master_resources)); + } + + /* Add slave windows to list */ + INIT_LIST_HEAD(&(tsi148_bridge->slave_resources)); + for (i = 0; i < TSI148_MAX_SLAVE; i++) { + slave_image = (struct vme_slave_resource *)kmalloc( + sizeof(struct vme_slave_resource), GFP_KERNEL); + if (slave_image == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "slave resource structure\n"); + retval = -ENOMEM; + goto err_slave; + } + slave_image->parent = tsi148_bridge; + mutex_init(&(slave_image->mtx)); + slave_image->locked = 0; + slave_image->number = i; + slave_image->address_attr = VME_A16 | VME_A24 | VME_A32 | + VME_A64 | VME_CRCSR | VME_USER1 | VME_USER2 | + VME_USER3 | VME_USER4; + slave_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | + VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | + VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER | + VME_PROG | VME_DATA; + list_add_tail(&(slave_image->list), + &(tsi148_bridge->slave_resources)); + } + + /* Add dma engines to list */ + INIT_LIST_HEAD(&(tsi148_bridge->dma_resources)); + for (i = 0; i < TSI148_MAX_DMA; i++) { + dma_ctrlr = (struct vme_dma_resource *)kmalloc( + sizeof(struct vme_dma_resource), GFP_KERNEL); + if (dma_ctrlr == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "dma resource structure\n"); + retval = -ENOMEM; + goto err_dma; + } + dma_ctrlr->parent = tsi148_bridge; + mutex_init(&(dma_ctrlr->mtx)); + dma_ctrlr->locked = 0; + dma_ctrlr->number = i; + INIT_LIST_HEAD(&(dma_ctrlr->pending)); + INIT_LIST_HEAD(&(dma_ctrlr->running)); + list_add_tail(&(dma_ctrlr->list), + &(tsi148_bridge->dma_resources)); + } + + /* Add location monitor to list */ + INIT_LIST_HEAD(&(tsi148_bridge->lm_resources)); + lm = kmalloc(sizeof(struct vme_lm_resource), GFP_KERNEL); + if (lm == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "location monitor resource structure\n"); + retval = -ENOMEM; + goto err_lm; + } + lm->parent = tsi148_bridge; + mutex_init(&(lm->mtx)); + lm->locked = 0; + lm->number = 1; + lm->monitors = 4; + list_add_tail(&(lm->list), &(tsi148_bridge->lm_resources)); + + tsi148_bridge->slave_get = tsi148_slave_get; + tsi148_bridge->slave_set = tsi148_slave_set; + tsi148_bridge->master_get = tsi148_master_get; + tsi148_bridge->master_set = tsi148_master_set; + tsi148_bridge->master_read = tsi148_master_read; + tsi148_bridge->master_write = tsi148_master_write; + tsi148_bridge->master_rmw = tsi148_master_rmw; + tsi148_bridge->dma_list_add = tsi148_dma_list_add; + tsi148_bridge->dma_list_exec = tsi148_dma_list_exec; + tsi148_bridge->dma_list_empty = tsi148_dma_list_empty; + tsi148_bridge->request_irq = tsi148_request_irq; + tsi148_bridge->free_irq = tsi148_free_irq; + tsi148_bridge->generate_irq = tsi148_generate_irq; + tsi148_bridge->lm_set = tsi148_lm_set; + tsi148_bridge->lm_get = tsi148_lm_get; + tsi148_bridge->lm_attach = tsi148_lm_attach; + tsi148_bridge->lm_detach = tsi148_lm_detach; + tsi148_bridge->slot_get = tsi148_slot_get; + + data = ioread32be(tsi148_bridge->base + TSI148_LCSR_VSTAT); + dev_info(&pdev->dev, "Board is%s the VME system controller\n", + (data & TSI148_LCSR_VSTAT_SCONS)? "" : " not"); + dev_info(&pdev->dev, "VME geographical address is %d\n", + data & TSI148_LCSR_VSTAT_GA_M); + dev_info(&pdev->dev, "VME Write and flush and error check is %s\n", + err_chk ? "enabled" : "disabled"); + + if(tsi148_crcsr_init(pdev)) { + dev_err(&pdev->dev, "CR/CSR configuration failed.\n"); + goto err_crcsr; + + } + + /* Need to save tsi148_bridge pointer locally in link list for use in + * tsi148_remove() + */ + retval = vme_register_bridge(tsi148_bridge); + if (retval != 0) { + dev_err(&pdev->dev, "Chip Registration failed.\n"); + goto err_reg; + } + + /* Clear VME bus "board fail", and "power-up reset" lines */ + data = ioread32be(tsi148_bridge->base + TSI148_LCSR_VSTAT); + data &= ~TSI148_LCSR_VSTAT_BRDFL; + data |= TSI148_LCSR_VSTAT_CPURST; + iowrite32be(data, tsi148_bridge->base + TSI148_LCSR_VSTAT); + + return 0; + + vme_unregister_bridge(tsi148_bridge); +err_reg: + tsi148_crcsr_exit(pdev); +err_crcsr: +err_lm: + /* resources are stored in link list */ + list_for_each(pos, &(tsi148_bridge->lm_resources)) { + lm = list_entry(pos, struct vme_lm_resource, list); + list_del(pos); + kfree(lm); + } +err_dma: + /* resources are stored in link list */ + list_for_each(pos, &(tsi148_bridge->dma_resources)) { + dma_ctrlr = list_entry(pos, struct vme_dma_resource, list); + list_del(pos); + kfree(dma_ctrlr); + } +err_slave: + /* resources are stored in link list */ + list_for_each(pos, &(tsi148_bridge->slave_resources)) { + slave_image = list_entry(pos, struct vme_slave_resource, list); + list_del(pos); + kfree(slave_image); + } +err_master: + /* resources are stored in link list */ + list_for_each(pos, &(tsi148_bridge->master_resources)) { + master_image = list_entry(pos, struct vme_master_resource, list); + list_del(pos); + kfree(master_image); + } + + tsi148_irq_exit(pdev); +err_irq: +err_test: + iounmap(tsi148_bridge->base); +err_remap: + pci_release_regions(pdev); +err_resource: + pci_disable_device(pdev); +err_enable: + kfree(tsi148_bridge); +err_struct: + return retval; + +} + +static void tsi148_remove(struct pci_dev *pdev) +{ + struct list_head *pos = NULL; + struct vme_master_resource *master_image; + struct vme_slave_resource *slave_image; + struct vme_dma_resource *dma_ctrlr; + int i; + + dev_dbg(&pdev->dev, "Driver is being unloaded.\n"); + + /* XXX We need to find the pdev->dev in the list of vme_bridge->dev's */ + + /* + * Shutdown all inbound and outbound windows. + */ + for (i = 0; i < 8; i++) { + iowrite32be(0, tsi148_bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITAT); + iowrite32be(0, tsi148_bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTAT); + } + + /* + * Shutdown Location monitor. + */ + iowrite32be(0, tsi148_bridge->base + TSI148_LCSR_LMAT); + + /* + * Shutdown CRG map. + */ + iowrite32be(0, tsi148_bridge->base + TSI148_LCSR_CSRAT); + + /* + * Clear error status. + */ + iowrite32be(0xFFFFFFFF, tsi148_bridge->base + TSI148_LCSR_EDPAT); + iowrite32be(0xFFFFFFFF, tsi148_bridge->base + TSI148_LCSR_VEAT); + iowrite32be(0x07000700, tsi148_bridge->base + TSI148_LCSR_PSTAT); + + /* + * Remove VIRQ interrupt (if any) + */ + if (ioread32be(tsi148_bridge->base + TSI148_LCSR_VICR) & 0x800) { + iowrite32be(0x8000, tsi148_bridge->base + TSI148_LCSR_VICR); + } + + /* + * Disable and clear all interrupts. + */ + iowrite32be(0x0, tsi148_bridge->base + TSI148_LCSR_INTEO); + iowrite32be(0xFFFFFFFF, tsi148_bridge->base + TSI148_LCSR_INTC); + iowrite32be(0xFFFFFFFF, tsi148_bridge->base + TSI148_LCSR_INTEN); + + /* + * Map all Interrupts to PCI INTA + */ + iowrite32be(0x0, tsi148_bridge->base + TSI148_LCSR_INTM1); + iowrite32be(0x0, tsi148_bridge->base + TSI148_LCSR_INTM2); + + tsi148_irq_exit(pdev); + + vme_unregister_bridge(tsi148_bridge); + + tsi148_crcsr_exit(pdev); + + /* resources are stored in link list */ + list_for_each(pos, &(tsi148_bridge->dma_resources)) { + dma_ctrlr = list_entry(pos, struct vme_dma_resource, list); + list_del(pos); + kfree(dma_ctrlr); + } + + /* resources are stored in link list */ + list_for_each(pos, &(tsi148_bridge->slave_resources)) { + slave_image = list_entry(pos, struct vme_slave_resource, list); + list_del(pos); + kfree(slave_image); + } + + /* resources are stored in link list */ + list_for_each(pos, &(tsi148_bridge->master_resources)) { + master_image = list_entry(pos, struct vme_master_resource, list); + list_del(pos); + kfree(master_image); + } + + tsi148_irq_exit(pdev); + + iounmap(tsi148_bridge->base); + + pci_release_regions(pdev); + + pci_disable_device(pdev); + + kfree(tsi148_bridge); +} + +static void __exit tsi148_exit(void) +{ + pci_unregister_driver(&tsi148_driver); + + printk(KERN_DEBUG "Driver removed.\n"); +} + +MODULE_PARM_DESC(err_chk, "Check for VME errors on reads and writes"); +module_param(err_chk, bool, 0); + +MODULE_DESCRIPTION("VME driver for the Tundra Tempe VME bridge"); +MODULE_LICENSE("GPL"); + +module_init(tsi148_init); +module_exit(tsi148_exit); + +/*---------------------------------------------------------------------------- + * STAGING + *--------------------------------------------------------------------------*/ + +#if 0 +/* + * Direct Mode DMA transfer + * + * XXX Not looking at direct mode for now, we can always use link list mode + * with a single entry. + */ +int tsi148_dma_run(struct vme_dma_resource *resource, struct vme_dma_attr src, + struct vme_dma_attr dest, size_t count) +{ + u32 dctlreg = 0; + unsigned int tmp; + int val; + int channel, x; + struct vmeDmaPacket *cur_dma; + struct tsi148_dma_descriptor *dmaLL; + + /* direct mode */ + dctlreg = 0x800000; + + for (x = 0; x < 8; x++) { /* vme block size */ + if ((32 << x) >= vmeDma->maxVmeBlockSize) { + break; + } + } + if (x == 8) + x = 7; + dctlreg |= (x << 12); + + for (x = 0; x < 8; x++) { /* pci block size */ + if ((32 << x) >= vmeDma->maxPciBlockSize) { + break; + } + } + if (x == 8) + x = 7; + dctlreg |= (x << 4); + + if (vmeDma->vmeBackOffTimer) { + for (x = 1; x < 8; x++) { /* vme timer */ + if ((1 << (x - 1)) >= vmeDma->vmeBackOffTimer) { + break; + } + } + if (x == 8) + x = 7; + dctlreg |= (x << 8); + } + + if (vmeDma->pciBackOffTimer) { + for (x = 1; x < 8; x++) { /* pci timer */ + if ((1 << (x - 1)) >= vmeDma->pciBackOffTimer) { + break; + } + } + if (x == 8) + x = 7; + dctlreg |= (x << 0); + } + + /* Program registers for DMA transfer */ + iowrite32be(dmaLL->dsau, tsi148_bridge->base + + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DSAU); + iowrite32be(dmaLL->dsal, tsi148_bridge->base + + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DSAL); + iowrite32be(dmaLL->ddau, tsi148_bridge->base + + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DDAU); + iowrite32be(dmaLL->ddal, tsi148_bridge->base + + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DDAL); + iowrite32be(dmaLL->dsat, tsi148_bridge->base + + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DSAT); + iowrite32be(dmaLL->ddat, tsi148_bridge->base + + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DDAT); + iowrite32be(dmaLL->dcnt, tsi148_bridge->base + + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DCNT); + iowrite32be(dmaLL->ddbs, tsi148_bridge->base + + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DDBS); + + /* Start the operation */ + iowrite32be(dctlreg | 0x2000000, tsi148_bridge->base + + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DCTL); + + tmp = ioread32be(tsi148_bridge->base + TSI148_LCSR_DMA[channel] + + TSI148_LCSR_OFFSET_DSTA); + wait_event_interruptible(dma_queue[channel], (tmp & 0x1000000) == 0); + + /* + * Read status register, we should probably do this in some error + * handler rather than here so that we can be sure we haven't kicked off + * another DMA transfer. + */ + val = ioread32be(tsi148_bridge->base + TSI148_LCSR_DMA[channel] + + TSI148_LCSR_OFFSET_DSTA); + + vmeDma->vmeDmaStatus = 0; + if (val & 0x10000000) { + printk(KERN_ERR + "DMA Error in DMA_tempe_irqhandler DSTA=%08X\n", + val); + vmeDma->vmeDmaStatus = val; + + } + return (0); +} +#endif + +#if 0 + +/* Global VME controller information */ +struct pci_dev *vme_pci_dev; + +/* + * Set the VME bus arbiter with the requested attributes + */ +int tempe_set_arbiter(vmeArbiterCfg_t * vmeArb) +{ + int temp_ctl = 0; + int gto = 0; + + temp_ctl = ioread32be(tsi148_bridge->base + TSI148_LCSR_VCTRL); + temp_ctl &= 0xFFEFFF00; + + if (vmeArb->globalTimeoutTimer == 0xFFFFFFFF) { + gto = 8; + } else if (vmeArb->globalTimeoutTimer > 2048) { + return (-EINVAL); + } else if (vmeArb->globalTimeoutTimer == 0) { + gto = 0; + } else { + gto = 1; + while ((16 * (1 << (gto - 1))) < vmeArb->globalTimeoutTimer) { + gto += 1; + } + } + temp_ctl |= gto; + + if (vmeArb->arbiterMode != VME_PRIORITY_MODE) { + temp_ctl |= 1 << 6; + } + + if (vmeArb->arbiterTimeoutFlag) { + temp_ctl |= 1 << 7; + } + + if (vmeArb->noEarlyReleaseFlag) { + temp_ctl |= 1 << 20; + } + iowrite32be(temp_ctl, tsi148_bridge->base + TSI148_LCSR_VCTRL); + + return (0); +} + +/* + * Return the attributes of the VME bus arbiter. + */ +int tempe_get_arbiter(vmeArbiterCfg_t * vmeArb) +{ + int temp_ctl = 0; + int gto = 0; + + + temp_ctl = ioread32be(tsi148_bridge->base + TSI148_LCSR_VCTRL); + + gto = temp_ctl & 0xF; + if (gto != 0) { + vmeArb->globalTimeoutTimer = (16 * (1 << (gto - 1))); + } + + if (temp_ctl & (1 << 6)) { + vmeArb->arbiterMode = VME_R_ROBIN_MODE; + } else { + vmeArb->arbiterMode = VME_PRIORITY_MODE; + } + + if (temp_ctl & (1 << 7)) { + vmeArb->arbiterTimeoutFlag = 1; + } + + if (temp_ctl & (1 << 20)) { + vmeArb->noEarlyReleaseFlag = 1; + } + + return (0); +} + +/* + * Set the VME bus requestor with the requested attributes + */ +int tempe_set_requestor(vmeRequesterCfg_t * vmeReq) +{ + int temp_ctl = 0; + + temp_ctl = ioread32be(tsi148_bridge->base + TSI148_LCSR_VMCTRL); + temp_ctl &= 0xFFFF0000; + + if (vmeReq->releaseMode == 1) { + temp_ctl |= (1 << 3); + } + + if (vmeReq->fairMode == 1) { + temp_ctl |= (1 << 2); + } + + temp_ctl |= (vmeReq->timeonTimeoutTimer & 7) << 8; + temp_ctl |= (vmeReq->timeoffTimeoutTimer & 7) << 12; + temp_ctl |= vmeReq->requestLevel; + + iowrite32be(temp_ctl, tsi148_bridge->base + TSI148_LCSR_VMCTRL); + return (0); +} + +/* + * Return the attributes of the VME bus requestor + */ +int tempe_get_requestor(vmeRequesterCfg_t * vmeReq) +{ + int temp_ctl = 0; + + temp_ctl = ioread32be(tsi148_bridge->base + TSI148_LCSR_VMCTRL); + + if (temp_ctl & 0x18) { + vmeReq->releaseMode = 1; + } + + if (temp_ctl & (1 << 2)) { + vmeReq->fairMode = 1; + } + + vmeReq->requestLevel = temp_ctl & 3; + vmeReq->timeonTimeoutTimer = (temp_ctl >> 8) & 7; + vmeReq->timeoffTimeoutTimer = (temp_ctl >> 12) & 7; + + return (0); +} + + +#endif diff --git a/drivers/staging/vme/bridges/vme_tsi148.h b/drivers/staging/vme/bridges/vme_tsi148.h new file mode 100644 index 0000000..6f0f705 --- /dev/null +++ b/drivers/staging/vme/bridges/vme_tsi148.h @@ -0,0 +1,1387 @@ +/* + * tsi148.h + * + * Support for the Tundra TSI148 VME Bridge chip + * + * Author: Tom Armistead + * Updated and maintained by Ajit Prem + * Copyright 2004 Motorola Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef TSI148_H +#define TSI148_H + +#ifndef PCI_VENDOR_ID_TUNDRA +#define PCI_VENDOR_ID_TUNDRA 0x10e3 +#endif + +#ifndef PCI_DEVICE_ID_TUNDRA_TSI148 +#define PCI_DEVICE_ID_TUNDRA_TSI148 0x148 +#endif + +/* + * Define the number of each that the Tsi148 supports. + */ +#define TSI148_MAX_MASTER 8 /* Max Master Windows */ +#define TSI148_MAX_SLAVE 8 /* Max Slave Windows */ +#define TSI148_MAX_DMA 2 /* Max DMA Controllers */ +#define TSI148_MAX_MAILBOX 4 /* Max Mail Box registers */ +#define TSI148_MAX_SEMAPHORE 8 /* Max Semaphores */ + +/* + * Layout of a DMAC Linked-List Descriptor + * + * Note: This structure is accessed via the chip and therefore must be + * correctly laid out - It must also be aligned on 64-bit boundaries. + */ +struct tsi148_dma_descriptor { + u32 dsau; /* Source Address */ + u32 dsal; + u32 ddau; /* Destination Address */ + u32 ddal; + u32 dsat; /* Source attributes */ + u32 ddat; /* Destination attributes */ + u32 dnlau; /* Next link address */ + u32 dnlal; + u32 dcnt; /* Byte count */ + u32 ddbs; /* 2eSST Broadcast select */ +}; + +struct tsi148_dma_entry { + /* + * The descriptor needs to be aligned on a 64-bit boundary, we increase + * the chance of this by putting it first in the structure. + */ + struct tsi148_dma_descriptor descriptor; + struct list_head list; +}; + +/* + * TSI148 ASIC register structure overlays and bit field definitions. + * + * Note: Tsi148 Register Group (CRG) consists of the following + * combination of registers: + * PCFS - PCI Configuration Space Registers + * LCSR - Local Control and Status Registers + * GCSR - Global Control and Status Registers + * CR/CSR - Subset of Configuration ROM / + * Control and Status Registers + */ + + +/* + * Command/Status Registers (CRG + $004) + */ +#define TSI148_PCFS_ID 0x0 +#define TSI148_PCFS_CSR 0x4 +#define TSI148_PCFS_CLASS 0x8 +#define TSI148_PCFS_MISC0 0xC +#define TSI148_PCFS_MBARL 0x10 +#define TSI148_PCFS_MBARU 0x14 + +#define TSI148_PCFS_SUBID 0x28 + +#define TSI148_PCFS_CAPP 0x34 + +#define TSI148_PCFS_MISC1 0x3C + +#define TSI148_PCFS_XCAPP 0x40 +#define TSI148_PCFS_XSTAT 0x44 + +/* + * LCSR definitions + */ + +/* + * Outbound Translations + */ +#define TSI148_LCSR_OT0_OTSAU 0x100 +#define TSI148_LCSR_OT0_OTSAL 0x104 +#define TSI148_LCSR_OT0_OTEAU 0x108 +#define TSI148_LCSR_OT0_OTEAL 0x10C +#define TSI148_LCSR_OT0_OTOFU 0x110 +#define TSI148_LCSR_OT0_OTOFL 0x114 +#define TSI148_LCSR_OT0_OTBS 0x118 +#define TSI148_LCSR_OT0_OTAT 0x11C + +#define TSI148_LCSR_OT1_OTSAU 0x120 +#define TSI148_LCSR_OT1_OTSAL 0x124 +#define TSI148_LCSR_OT1_OTEAU 0x128 +#define TSI148_LCSR_OT1_OTEAL 0x12C +#define TSI148_LCSR_OT1_OTOFU 0x130 +#define TSI148_LCSR_OT1_OTOFL 0x134 +#define TSI148_LCSR_OT1_OTBS 0x138 +#define TSI148_LCSR_OT1_OTAT 0x13C + +#define TSI148_LCSR_OT2_OTSAU 0x140 +#define TSI148_LCSR_OT2_OTSAL 0x144 +#define TSI148_LCSR_OT2_OTEAU 0x148 +#define TSI148_LCSR_OT2_OTEAL 0x14C +#define TSI148_LCSR_OT2_OTOFU 0x150 +#define TSI148_LCSR_OT2_OTOFL 0x154 +#define TSI148_LCSR_OT2_OTBS 0x158 +#define TSI148_LCSR_OT2_OTAT 0x15C + +#define TSI148_LCSR_OT3_OTSAU 0x160 +#define TSI148_LCSR_OT3_OTSAL 0x164 +#define TSI148_LCSR_OT3_OTEAU 0x168 +#define TSI148_LCSR_OT3_OTEAL 0x16C +#define TSI148_LCSR_OT3_OTOFU 0x170 +#define TSI148_LCSR_OT3_OTOFL 0x174 +#define TSI148_LCSR_OT3_OTBS 0x178 +#define TSI148_LCSR_OT3_OTAT 0x17C + +#define TSI148_LCSR_OT4_OTSAU 0x180 +#define TSI148_LCSR_OT4_OTSAL 0x184 +#define TSI148_LCSR_OT4_OTEAU 0x188 +#define TSI148_LCSR_OT4_OTEAL 0x18C +#define TSI148_LCSR_OT4_OTOFU 0x190 +#define TSI148_LCSR_OT4_OTOFL 0x194 +#define TSI148_LCSR_OT4_OTBS 0x198 +#define TSI148_LCSR_OT4_OTAT 0x19C + +#define TSI148_LCSR_OT5_OTSAU 0x1A0 +#define TSI148_LCSR_OT5_OTSAL 0x1A4 +#define TSI148_LCSR_OT5_OTEAU 0x1A8 +#define TSI148_LCSR_OT5_OTEAL 0x1AC +#define TSI148_LCSR_OT5_OTOFU 0x1B0 +#define TSI148_LCSR_OT5_OTOFL 0x1B4 +#define TSI148_LCSR_OT5_OTBS 0x1B8 +#define TSI148_LCSR_OT5_OTAT 0x1BC + +#define TSI148_LCSR_OT6_OTSAU 0x1C0 +#define TSI148_LCSR_OT6_OTSAL 0x1C4 +#define TSI148_LCSR_OT6_OTEAU 0x1C8 +#define TSI148_LCSR_OT6_OTEAL 0x1CC +#define TSI148_LCSR_OT6_OTOFU 0x1D0 +#define TSI148_LCSR_OT6_OTOFL 0x1D4 +#define TSI148_LCSR_OT6_OTBS 0x1D8 +#define TSI148_LCSR_OT6_OTAT 0x1DC + +#define TSI148_LCSR_OT7_OTSAU 0x1E0 +#define TSI148_LCSR_OT7_OTSAL 0x1E4 +#define TSI148_LCSR_OT7_OTEAU 0x1E8 +#define TSI148_LCSR_OT7_OTEAL 0x1EC +#define TSI148_LCSR_OT7_OTOFU 0x1F0 +#define TSI148_LCSR_OT7_OTOFL 0x1F4 +#define TSI148_LCSR_OT7_OTBS 0x1F8 +#define TSI148_LCSR_OT7_OTAT 0x1FC + +#define TSI148_LCSR_OT0 0x100 +#define TSI148_LCSR_OT1 0x120 +#define TSI148_LCSR_OT2 0x140 +#define TSI148_LCSR_OT3 0x160 +#define TSI148_LCSR_OT4 0x180 +#define TSI148_LCSR_OT5 0x1A0 +#define TSI148_LCSR_OT6 0x1C0 +#define TSI148_LCSR_OT7 0x1E0 + +static const int TSI148_LCSR_OT[8] = { TSI148_LCSR_OT0, TSI148_LCSR_OT1, + TSI148_LCSR_OT2, TSI148_LCSR_OT3, + TSI148_LCSR_OT4, TSI148_LCSR_OT5, + TSI148_LCSR_OT6, TSI148_LCSR_OT7 }; + +#define TSI148_LCSR_OFFSET_OTSAU 0x0 +#define TSI148_LCSR_OFFSET_OTSAL 0x4 +#define TSI148_LCSR_OFFSET_OTEAU 0x8 +#define TSI148_LCSR_OFFSET_OTEAL 0xC +#define TSI148_LCSR_OFFSET_OTOFU 0x10 +#define TSI148_LCSR_OFFSET_OTOFL 0x14 +#define TSI148_LCSR_OFFSET_OTBS 0x18 +#define TSI148_LCSR_OFFSET_OTAT 0x1C + +/* + * VMEbus interupt ack + * offset 200 + */ +#define TSI148_LCSR_VIACK1 0x204 +#define TSI148_LCSR_VIACK2 0x208 +#define TSI148_LCSR_VIACK3 0x20C +#define TSI148_LCSR_VIACK4 0x210 +#define TSI148_LCSR_VIACK5 0x214 +#define TSI148_LCSR_VIACK6 0x218 +#define TSI148_LCSR_VIACK7 0x21C + +static const int TSI148_LCSR_VIACK[8] = { 0, TSI148_LCSR_VIACK1, + TSI148_LCSR_VIACK2, TSI148_LCSR_VIACK3, + TSI148_LCSR_VIACK4, TSI148_LCSR_VIACK5, + TSI148_LCSR_VIACK6, TSI148_LCSR_VIACK7 }; + +/* + * RMW + * offset 220 + */ +#define TSI148_LCSR_RMWAU 0x220 +#define TSI148_LCSR_RMWAL 0x224 +#define TSI148_LCSR_RMWEN 0x228 +#define TSI148_LCSR_RMWC 0x22C +#define TSI148_LCSR_RMWS 0x230 + +/* + * VMEbus control + * offset 234 + */ +#define TSI148_LCSR_VMCTRL 0x234 +#define TSI148_LCSR_VCTRL 0x238 +#define TSI148_LCSR_VSTAT 0x23C + +/* + * PCI status + * offset 240 + */ +#define TSI148_LCSR_PSTAT 0x240 + +/* + * VME filter. + * offset 250 + */ +#define TSI148_LCSR_VMEFL 0x250 + + /* + * VME exception. + * offset 260 + */ +#define TSI148_LCSR_VEAU 0x260 +#define TSI148_LCSR_VEAL 0x264 +#define TSI148_LCSR_VEAT 0x268 + + /* + * PCI error + * offset 270 + */ +#define TSI148_LCSR_EDPAU 0x270 +#define TSI148_LCSR_EDPAL 0x274 +#define TSI148_LCSR_EDPXA 0x278 +#define TSI148_LCSR_EDPXS 0x27C +#define TSI148_LCSR_EDPAT 0x280 + + /* + * Inbound Translations + * offset 300 + */ +#define TSI148_LCSR_IT0_ITSAU 0x300 +#define TSI148_LCSR_IT0_ITSAL 0x304 +#define TSI148_LCSR_IT0_ITEAU 0x308 +#define TSI148_LCSR_IT0_ITEAL 0x30C +#define TSI148_LCSR_IT0_ITOFU 0x310 +#define TSI148_LCSR_IT0_ITOFL 0x314 +#define TSI148_LCSR_IT0_ITAT 0x318 + +#define TSI148_LCSR_IT1_ITSAU 0x320 +#define TSI148_LCSR_IT1_ITSAL 0x324 +#define TSI148_LCSR_IT1_ITEAU 0x328 +#define TSI148_LCSR_IT1_ITEAL 0x32C +#define TSI148_LCSR_IT1_ITOFU 0x330 +#define TSI148_LCSR_IT1_ITOFL 0x334 +#define TSI148_LCSR_IT1_ITAT 0x338 + +#define TSI148_LCSR_IT2_ITSAU 0x340 +#define TSI148_LCSR_IT2_ITSAL 0x344 +#define TSI148_LCSR_IT2_ITEAU 0x348 +#define TSI148_LCSR_IT2_ITEAL 0x34C +#define TSI148_LCSR_IT2_ITOFU 0x350 +#define TSI148_LCSR_IT2_ITOFL 0x354 +#define TSI148_LCSR_IT2_ITAT 0x358 + +#define TSI148_LCSR_IT3_ITSAU 0x360 +#define TSI148_LCSR_IT3_ITSAL 0x364 +#define TSI148_LCSR_IT3_ITEAU 0x368 +#define TSI148_LCSR_IT3_ITEAL 0x36C +#define TSI148_LCSR_IT3_ITOFU 0x370 +#define TSI148_LCSR_IT3_ITOFL 0x374 +#define TSI148_LCSR_IT3_ITAT 0x378 + +#define TSI148_LCSR_IT4_ITSAU 0x380 +#define TSI148_LCSR_IT4_ITSAL 0x384 +#define TSI148_LCSR_IT4_ITEAU 0x388 +#define TSI148_LCSR_IT4_ITEAL 0x38C +#define TSI148_LCSR_IT4_ITOFU 0x390 +#define TSI148_LCSR_IT4_ITOFL 0x394 +#define TSI148_LCSR_IT4_ITAT 0x398 + +#define TSI148_LCSR_IT5_ITSAU 0x3A0 +#define TSI148_LCSR_IT5_ITSAL 0x3A4 +#define TSI148_LCSR_IT5_ITEAU 0x3A8 +#define TSI148_LCSR_IT5_ITEAL 0x3AC +#define TSI148_LCSR_IT5_ITOFU 0x3B0 +#define TSI148_LCSR_IT5_ITOFL 0x3B4 +#define TSI148_LCSR_IT5_ITAT 0x3B8 + +#define TSI148_LCSR_IT6_ITSAU 0x3C0 +#define TSI148_LCSR_IT6_ITSAL 0x3C4 +#define TSI148_LCSR_IT6_ITEAU 0x3C8 +#define TSI148_LCSR_IT6_ITEAL 0x3CC +#define TSI148_LCSR_IT6_ITOFU 0x3D0 +#define TSI148_LCSR_IT6_ITOFL 0x3D4 +#define TSI148_LCSR_IT6_ITAT 0x3D8 + +#define TSI148_LCSR_IT7_ITSAU 0x3E0 +#define TSI148_LCSR_IT7_ITSAL 0x3E4 +#define TSI148_LCSR_IT7_ITEAU 0x3E8 +#define TSI148_LCSR_IT7_ITEAL 0x3EC +#define TSI148_LCSR_IT7_ITOFU 0x3F0 +#define TSI148_LCSR_IT7_ITOFL 0x3F4 +#define TSI148_LCSR_IT7_ITAT 0x3F8 + + +#define TSI148_LCSR_IT0 0x300 +#define TSI148_LCSR_IT1 0x320 +#define TSI148_LCSR_IT2 0x340 +#define TSI148_LCSR_IT3 0x360 +#define TSI148_LCSR_IT4 0x380 +#define TSI148_LCSR_IT5 0x3A0 +#define TSI148_LCSR_IT6 0x3C0 +#define TSI148_LCSR_IT7 0x3E0 + +static const int TSI148_LCSR_IT[8] = { TSI148_LCSR_IT0, TSI148_LCSR_IT1, + TSI148_LCSR_IT2, TSI148_LCSR_IT3, + TSI148_LCSR_IT4, TSI148_LCSR_IT5, + TSI148_LCSR_IT6, TSI148_LCSR_IT7 }; + +#define TSI148_LCSR_OFFSET_ITSAU 0x0 +#define TSI148_LCSR_OFFSET_ITSAL 0x4 +#define TSI148_LCSR_OFFSET_ITEAU 0x8 +#define TSI148_LCSR_OFFSET_ITEAL 0xC +#define TSI148_LCSR_OFFSET_ITOFU 0x10 +#define TSI148_LCSR_OFFSET_ITOFL 0x14 +#define TSI148_LCSR_OFFSET_ITAT 0x18 + + /* + * Inbound Translation GCSR + * offset 400 + */ +#define TSI148_LCSR_GBAU 0x400 +#define TSI148_LCSR_GBAL 0x404 +#define TSI148_LCSR_GCSRAT 0x408 + + /* + * Inbound Translation CRG + * offset 40C + */ +#define TSI148_LCSR_CBAU 0x40C +#define TSI148_LCSR_CBAL 0x410 +#define TSI148_LCSR_CSRAT 0x414 + + /* + * Inbound Translation CR/CSR + * CRG + * offset 418 + */ +#define TSI148_LCSR_CROU 0x418 +#define TSI148_LCSR_CROL 0x41C +#define TSI148_LCSR_CRAT 0x420 + + /* + * Inbound Translation Location Monitor + * offset 424 + */ +#define TSI148_LCSR_LMBAU 0x424 +#define TSI148_LCSR_LMBAL 0x428 +#define TSI148_LCSR_LMAT 0x42C + + /* + * VMEbus Interrupt Control. + * offset 430 + */ +#define TSI148_LCSR_BCU 0x430 +#define TSI148_LCSR_BCL 0x434 +#define TSI148_LCSR_BPGTR 0x438 +#define TSI148_LCSR_BPCTR 0x43C +#define TSI148_LCSR_VICR 0x440 + + /* + * Local Bus Interrupt Control. + * offset 448 + */ +#define TSI148_LCSR_INTEN 0x448 +#define TSI148_LCSR_INTEO 0x44C +#define TSI148_LCSR_INTS 0x450 +#define TSI148_LCSR_INTC 0x454 +#define TSI148_LCSR_INTM1 0x458 +#define TSI148_LCSR_INTM2 0x45C + + /* + * DMA Controllers + * offset 500 + */ +#define TSI148_LCSR_DCTL0 0x500 +#define TSI148_LCSR_DSTA0 0x504 +#define TSI148_LCSR_DCSAU0 0x508 +#define TSI148_LCSR_DCSAL0 0x50C +#define TSI148_LCSR_DCDAU0 0x510 +#define TSI148_LCSR_DCDAL0 0x514 +#define TSI148_LCSR_DCLAU0 0x518 +#define TSI148_LCSR_DCLAL0 0x51C +#define TSI148_LCSR_DSAU0 0x520 +#define TSI148_LCSR_DSAL0 0x524 +#define TSI148_LCSR_DDAU0 0x528 +#define TSI148_LCSR_DDAL0 0x52C +#define TSI148_LCSR_DSAT0 0x530 +#define TSI148_LCSR_DDAT0 0x534 +#define TSI148_LCSR_DNLAU0 0x538 +#define TSI148_LCSR_DNLAL0 0x53C +#define TSI148_LCSR_DCNT0 0x540 +#define TSI148_LCSR_DDBS0 0x544 + +#define TSI148_LCSR_DCTL1 0x580 +#define TSI148_LCSR_DSTA1 0x584 +#define TSI148_LCSR_DCSAU1 0x588 +#define TSI148_LCSR_DCSAL1 0x58C +#define TSI148_LCSR_DCDAU1 0x590 +#define TSI148_LCSR_DCDAL1 0x594 +#define TSI148_LCSR_DCLAU1 0x598 +#define TSI148_LCSR_DCLAL1 0x59C +#define TSI148_LCSR_DSAU1 0x5A0 +#define TSI148_LCSR_DSAL1 0x5A4 +#define TSI148_LCSR_DDAU1 0x5A8 +#define TSI148_LCSR_DDAL1 0x5AC +#define TSI148_LCSR_DSAT1 0x5B0 +#define TSI148_LCSR_DDAT1 0x5B4 +#define TSI148_LCSR_DNLAU1 0x5B8 +#define TSI148_LCSR_DNLAL1 0x5BC +#define TSI148_LCSR_DCNT1 0x5C0 +#define TSI148_LCSR_DDBS1 0x5C4 + +#define TSI148_LCSR_DMA0 0x500 +#define TSI148_LCSR_DMA1 0x580 + + +static const int TSI148_LCSR_DMA[TSI148_MAX_DMA] = { TSI148_LCSR_DMA0, + TSI148_LCSR_DMA1 }; + +#define TSI148_LCSR_OFFSET_DCTL 0x0 +#define TSI148_LCSR_OFFSET_DSTA 0x4 +#define TSI148_LCSR_OFFSET_DCSAU 0x8 +#define TSI148_LCSR_OFFSET_DCSAL 0xC +#define TSI148_LCSR_OFFSET_DCDAU 0x10 +#define TSI148_LCSR_OFFSET_DCDAL 0x14 +#define TSI148_LCSR_OFFSET_DCLAU 0x18 +#define TSI148_LCSR_OFFSET_DCLAL 0x1C +#define TSI148_LCSR_OFFSET_DSAU 0x20 +#define TSI148_LCSR_OFFSET_DSAL 0x24 +#define TSI148_LCSR_OFFSET_DDAU 0x28 +#define TSI148_LCSR_OFFSET_DDAL 0x2C +#define TSI148_LCSR_OFFSET_DSAT 0x30 +#define TSI148_LCSR_OFFSET_DDAT 0x34 +#define TSI148_LCSR_OFFSET_DNLAU 0x38 +#define TSI148_LCSR_OFFSET_DNLAL 0x3C +#define TSI148_LCSR_OFFSET_DCNT 0x40 +#define TSI148_LCSR_OFFSET_DDBS 0x44 + + /* + * GCSR Register Group + */ + + /* + * GCSR CRG + * offset 00 600 - DEVI/VENI + * offset 04 604 - CTRL/GA/REVID + * offset 08 608 - Semaphore3/2/1/0 + * offset 0C 60C - Seamphore7/6/5/4 + */ +#define TSI148_GCSR_ID 0x600 +#define TSI148_GCSR_CSR 0x604 +#define TSI148_GCSR_SEMA0 0x608 +#define TSI148_GCSR_SEMA1 0x60C + + /* + * Mail Box + * GCSR CRG + * offset 10 610 - Mailbox0 + */ +#define TSI148_GCSR_MBOX0 0x610 +#define TSI148_GCSR_MBOX1 0x614 +#define TSI148_GCSR_MBOX2 0x618 +#define TSI148_GCSR_MBOX3 0x61C + +static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0, + TSI148_GCSR_MBOX1, + TSI148_GCSR_MBOX2, + TSI148_GCSR_MBOX3 }; + + /* + * CR/CSR + */ + + /* + * CR/CSR CRG + * offset 7FFF4 FF4 - CSRBCR + * offset 7FFF8 FF8 - CSRBSR + * offset 7FFFC FFC - CBAR + */ +#define TSI148_CSRBCR 0xFF4 +#define TSI148_CSRBSR 0xFF8 +#define TSI148_CBAR 0xFFC + + + + + /* + * TSI148 Register Bit Definitions + */ + + /* + * PFCS Register Set + */ +#define TSI148_PCFS_CMMD_SERR (1<<8) /* SERR_L out pin ssys err */ +#define TSI148_PCFS_CMMD_PERR (1<<6) /* PERR_L out pin parity */ +#define TSI148_PCFS_CMMD_MSTR (1<<2) /* PCI bus master */ +#define TSI148_PCFS_CMMD_MEMSP (1<<1) /* PCI mem space access */ +#define TSI148_PCFS_CMMD_IOSP (1<<0) /* PCI I/O space enable */ + +#define TSI148_PCFS_STAT_RCPVE (1<<15) /* Detected Parity Error */ +#define TSI148_PCFS_STAT_SIGSE (1<<14) /* Signalled System Error */ +#define TSI148_PCFS_STAT_RCVMA (1<<13) /* Received Master Abort */ +#define TSI148_PCFS_STAT_RCVTA (1<<12) /* Received Target Abort */ +#define TSI148_PCFS_STAT_SIGTA (1<<11) /* Signalled Target Abort */ +#define TSI148_PCFS_STAT_SELTIM (3<<9) /* DELSEL Timing */ +#define TSI148_PCFS_STAT_DPAR (1<<8) /* Data Parity Err Reported */ +#define TSI148_PCFS_STAT_FAST (1<<7) /* Fast back-to-back Cap */ +#define TSI148_PCFS_STAT_P66M (1<<5) /* 66 MHz Capable */ +#define TSI148_PCFS_STAT_CAPL (1<<4) /* Capab List - address $34 */ + +/* + * Revision ID/Class Code Registers (CRG +$008) + */ +#define TSI148_PCFS_CLAS_M (0xFF<<24) /* Class ID */ +#define TSI148_PCFS_SUBCLAS_M (0xFF<<16) /* Sub-Class ID */ +#define TSI148_PCFS_PROGIF_M (0xFF<<8) /* Sub-Class ID */ +#define TSI148_PCFS_REVID_M (0xFF<<0) /* Rev ID */ + +/* + * Cache Line Size/ Master Latency Timer/ Header Type Registers (CRG + $00C) + */ +#define TSI148_PCFS_HEAD_M (0xFF<<16) /* Master Lat Timer */ +#define TSI148_PCFS_MLAT_M (0xFF<<8) /* Master Lat Timer */ +#define TSI148_PCFS_CLSZ_M (0xFF<<0) /* Cache Line Size */ + +/* + * Memory Base Address Lower Reg (CRG + $010) + */ +#define TSI148_PCFS_MBARL_BASEL_M (0xFFFFF<<12) /* Base Addr Lower Mask */ +#define TSI148_PCFS_MBARL_PRE (1<<3) /* Prefetch */ +#define TSI148_PCFS_MBARL_MTYPE_M (3<<1) /* Memory Type Mask */ +#define TSI148_PCFS_MBARL_IOMEM (1<<0) /* I/O Space Indicator */ + +/* + * Message Signaled Interrupt Capabilities Register (CRG + $040) + */ +#define TSI148_PCFS_MSICAP_64BAC (1<<7) /* 64-bit Address Capable */ +#define TSI148_PCFS_MSICAP_MME_M (7<<4) /* Multiple Msg Enable Mask */ +#define TSI148_PCFS_MSICAP_MMC_M (7<<1) /* Multiple Msg Capable Mask */ +#define TSI148_PCFS_MSICAP_MSIEN (1<<0) /* Msg signaled INT Enable */ + +/* + * Message Address Lower Register (CRG +$044) + */ +#define TSI148_PCFS_MSIAL_M (0x3FFFFFFF<<2) /* Mask */ + +/* + * Message Data Register (CRG + 4C) + */ +#define TSI148_PCFS_MSIMD_M (0xFFFF<<0) /* Mask */ + +/* + * PCI-X Capabilities Register (CRG + $050) + */ +#define TSI148_PCFS_PCIXCAP_MOST_M (7<<4) /* Max outstanding Split Tran */ +#define TSI148_PCFS_PCIXCAP_MMRBC_M (3<<2) /* Max Mem Read byte cnt */ +#define TSI148_PCFS_PCIXCAP_ERO (1<<1) /* Enable Relaxed Ordering */ +#define TSI148_PCFS_PCIXCAP_DPERE (1<<0) /* Data Parity Recover Enable */ + +/* + * PCI-X Status Register (CRG +$054) + */ +#define TSI148_PCFS_PCIXSTAT_RSCEM (1<<29) /* Recieved Split Comp Error */ +#define TSI148_PCFS_PCIXSTAT_DMCRS_M (7<<26) /* max Cumulative Read Size */ +#define TSI148_PCFS_PCIXSTAT_DMOST_M (7<<23) /* max outstanding Split Trans */ +#define TSI148_PCFS_PCIXSTAT_DMMRC_M (3<<21) /* max mem read byte count */ +#define TSI148_PCFS_PCIXSTAT_DC (1<<20) /* Device Complexity */ +#define TSI148_PCFS_PCIXSTAT_USC (1<<19) /* Unexpected Split comp */ +#define TSI148_PCFS_PCIXSTAT_SCD (1<<18) /* Split completion discard */ +#define TSI148_PCFS_PCIXSTAT_133C (1<<17) /* 133MHz capable */ +#define TSI148_PCFS_PCIXSTAT_64D (1<<16) /* 64 bit device */ +#define TSI148_PCFS_PCIXSTAT_BN_M (0xFF<<8) /* Bus number */ +#define TSI148_PCFS_PCIXSTAT_DN_M (0x1F<<3) /* Device number */ +#define TSI148_PCFS_PCIXSTAT_FN_M (7<<0) /* Function Number */ + +/* + * LCSR Registers + */ + +/* + * Outbound Translation Starting Address Lower + */ +#define TSI148_LCSR_OTSAL_M (0xFFFF<<16) /* Mask */ + +/* + * Outbound Translation Ending Address Lower + */ +#define TSI148_LCSR_OTEAL_M (0xFFFF<<16) /* Mask */ + +/* + * Outbound Translation Offset Lower + */ +#define TSI148_LCSR_OTOFFL_M (0xFFFF<<16) /* Mask */ + +/* + * Outbound Translation 2eSST Broadcast Select + */ +#define TSI148_LCSR_OTBS_M (0xFFFFF<<0) /* Mask */ + +/* + * Outbound Translation Attribute + */ +#define TSI148_LCSR_OTAT_EN (1<<31) /* Window Enable */ +#define TSI148_LCSR_OTAT_MRPFD (1<<18) /* Prefetch Disable */ + +#define TSI148_LCSR_OTAT_PFS_M (3<<16) /* Prefetch Size Mask */ +#define TSI148_LCSR_OTAT_PFS_2 (0<<16) /* 2 Cache Lines P Size */ +#define TSI148_LCSR_OTAT_PFS_4 (1<<16) /* 4 Cache Lines P Size */ +#define TSI148_LCSR_OTAT_PFS_8 (2<<16) /* 8 Cache Lines P Size */ +#define TSI148_LCSR_OTAT_PFS_16 (3<<16) /* 16 Cache Lines P Size */ + +#define TSI148_LCSR_OTAT_2eSSTM_M (7<<11) /* 2eSST Xfer Rate Mask */ +#define TSI148_LCSR_OTAT_2eSSTM_160 (0<<11) /* 160MB/s 2eSST Xfer Rate */ +#define TSI148_LCSR_OTAT_2eSSTM_267 (1<<11) /* 267MB/s 2eSST Xfer Rate */ +#define TSI148_LCSR_OTAT_2eSSTM_320 (2<<11) /* 320MB/s 2eSST Xfer Rate */ + +#define TSI148_LCSR_OTAT_TM_M (7<<8) /* Xfer Protocol Mask */ +#define TSI148_LCSR_OTAT_TM_SCT (0<<8) /* SCT Xfer Protocol */ +#define TSI148_LCSR_OTAT_TM_BLT (1<<8) /* BLT Xfer Protocol */ +#define TSI148_LCSR_OTAT_TM_MBLT (2<<8) /* MBLT Xfer Protocol */ +#define TSI148_LCSR_OTAT_TM_2eVME (3<<8) /* 2eVME Xfer Protocol */ +#define TSI148_LCSR_OTAT_TM_2eSST (4<<8) /* 2eSST Xfer Protocol */ +#define TSI148_LCSR_OTAT_TM_2eSSTB (5<<8) /* 2eSST Bcast Xfer Protocol */ + +#define TSI148_LCSR_OTAT_DBW_M (3<<6) /* Max Data Width */ +#define TSI148_LCSR_OTAT_DBW_16 (0<<6) /* 16-bit Data Width */ +#define TSI148_LCSR_OTAT_DBW_32 (1<<6) /* 32-bit Data Width */ + +#define TSI148_LCSR_OTAT_SUP (1<<5) /* Supervisory Access */ +#define TSI148_LCSR_OTAT_PGM (1<<4) /* Program Access */ + +#define TSI148_LCSR_OTAT_AMODE_M (0xf<<0) /* Address Mode Mask */ +#define TSI148_LCSR_OTAT_AMODE_A16 (0<<0) /* A16 Address Space */ +#define TSI148_LCSR_OTAT_AMODE_A24 (1<<0) /* A24 Address Space */ +#define TSI148_LCSR_OTAT_AMODE_A32 (2<<0) /* A32 Address Space */ +#define TSI148_LCSR_OTAT_AMODE_A64 (4<<0) /* A32 Address Space */ +#define TSI148_LCSR_OTAT_AMODE_CRCSR (5<<0) /* CR/CSR Address Space */ +#define TSI148_LCSR_OTAT_AMODE_USER1 (8<<0) /* User1 Address Space */ +#define TSI148_LCSR_OTAT_AMODE_USER2 (9<<0) /* User2 Address Space */ +#define TSI148_LCSR_OTAT_AMODE_USER3 (10<<0) /* User3 Address Space */ +#define TSI148_LCSR_OTAT_AMODE_USER4 (11<<0) /* User4 Address Space */ + +/* + * VME Master Control Register CRG+$234 + */ +#define TSI148_LCSR_VMCTRL_VSA (1<<27) /* VMEbus Stop Ack */ +#define TSI148_LCSR_VMCTRL_VS (1<<26) /* VMEbus Stop */ +#define TSI148_LCSR_VMCTRL_DHB (1<<25) /* Device Has Bus */ +#define TSI148_LCSR_VMCTRL_DWB (1<<24) /* Device Wants Bus */ + +#define TSI148_LCSR_VMCTRL_RMWEN (1<<20) /* RMW Enable */ + +#define TSI148_LCSR_VMCTRL_ATO_M (7<<16) /* Master Access Time-out Mask */ +#define TSI148_LCSR_VMCTRL_ATO_32 (0<<16) /* 32 us */ +#define TSI148_LCSR_VMCTRL_ATO_128 (1<<16) /* 128 us */ +#define TSI148_LCSR_VMCTRL_ATO_512 (2<<16) /* 512 us */ +#define TSI148_LCSR_VMCTRL_ATO_2M (3<<16) /* 2 ms */ +#define TSI148_LCSR_VMCTRL_ATO_8M (4<<16) /* 8 ms */ +#define TSI148_LCSR_VMCTRL_ATO_32M (5<<16) /* 32 ms */ +#define TSI148_LCSR_VMCTRL_ATO_128M (6<<16) /* 128 ms */ +#define TSI148_LCSR_VMCTRL_ATO_DIS (7<<16) /* Disabled */ + +#define TSI148_LCSR_VMCTRL_VTOFF_M (7<<12) /* VMEbus Master Time off */ +#define TSI148_LCSR_VMCTRL_VTOFF_0 (0<<12) /* 0us */ +#define TSI148_LCSR_VMCTRL_VTOFF_1 (1<<12) /* 1us */ +#define TSI148_LCSR_VMCTRL_VTOFF_2 (2<<12) /* 2us */ +#define TSI148_LCSR_VMCTRL_VTOFF_4 (3<<12) /* 4us */ +#define TSI148_LCSR_VMCTRL_VTOFF_8 (4<<12) /* 8us */ +#define TSI148_LCSR_VMCTRL_VTOFF_16 (5<<12) /* 16us */ +#define TSI148_LCSR_VMCTRL_VTOFF_32 (6<<12) /* 32us */ +#define TSI148_LCSR_VMCTRL_VTOFF_64 (7<<12) /* 64us */ + +#define TSI148_LCSR_VMCTRL_VTON_M (7<<8) /* VMEbus Master Time On */ +#define TSI148_LCSR_VMCTRL_VTON_4 (0<<8) /* 8us */ +#define TSI148_LCSR_VMCTRL_VTON_8 (1<<8) /* 8us */ +#define TSI148_LCSR_VMCTRL_VTON_16 (2<<8) /* 16us */ +#define TSI148_LCSR_VMCTRL_VTON_32 (3<<8) /* 32us */ +#define TSI148_LCSR_VMCTRL_VTON_64 (4<<8) /* 64us */ +#define TSI148_LCSR_VMCTRL_VTON_128 (5<<8) /* 128us */ +#define TSI148_LCSR_VMCTRL_VTON_256 (6<<8) /* 256us */ +#define TSI148_LCSR_VMCTRL_VTON_512 (7<<8) /* 512us */ + +#define TSI148_LCSR_VMCTRL_VREL_M (3<<3) /* VMEbus Master Rel Mode Mask */ +#define TSI148_LCSR_VMCTRL_VREL_T_D (0<<3) /* Time on or Done */ +#define TSI148_LCSR_VMCTRL_VREL_T_R_D (1<<3) /* Time on and REQ or Done */ +#define TSI148_LCSR_VMCTRL_VREL_T_B_D (2<<3) /* Time on and BCLR or Done */ +#define TSI148_LCSR_VMCTRL_VREL_T_D_R (3<<3) /* Time on or Done and REQ */ + +#define TSI148_LCSR_VMCTRL_VFAIR (1<<2) /* VMEbus Master Fair Mode */ +#define TSI148_LCSR_VMCTRL_VREQL_M (3<<0) /* VMEbus Master Req Level Mask */ + +/* + * VMEbus Control Register CRG+$238 + */ +#define TSI148_LCSR_VCTRL_LRE (1<<31) /* Late Retry Enable */ + +#define TSI148_LCSR_VCTRL_DLT_M (0xF<<24) /* Deadlock Timer */ +#define TSI148_LCSR_VCTRL_DLT_OFF (0<<24) /* Deadlock Timer Off */ +#define TSI148_LCSR_VCTRL_DLT_16 (1<<24) /* 16 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_32 (2<<24) /* 32 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_64 (3<<24) /* 64 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_128 (4<<24) /* 128 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_256 (5<<24) /* 256 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_512 (6<<24) /* 512 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_1024 (7<<24) /* 1024 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_2048 (8<<24) /* 2048 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_4096 (9<<24) /* 4096 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_8192 (0xA<<24) /* 8192 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_16384 (0xB<<24) /* 16384 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_32768 (0xC<<24) /* 32768 VCLKS */ + +#define TSI148_LCSR_VCTRL_NERBB (1<<20) /* No Early Release of Bus Busy */ + +#define TSI148_LCSR_VCTRL_SRESET (1<<17) /* System Reset */ +#define TSI148_LCSR_VCTRL_LRESET (1<<16) /* Local Reset */ + +#define TSI148_LCSR_VCTRL_SFAILAI (1<<15) /* SYSFAIL Auto Slot ID */ +#define TSI148_LCSR_VCTRL_BID_M (0x1F<<8) /* Broadcast ID Mask */ + +#define TSI148_LCSR_VCTRL_ATOEN (1<<7) /* Arbiter Time-out Enable */ +#define TSI148_LCSR_VCTRL_ROBIN (1<<6) /* VMEbus Round Robin */ + +#define TSI148_LCSR_VCTRL_GTO_M (7<<0) /* VMEbus Global Time-out Mask */ +#define TSI148_LCSR_VCTRL_GTO_8 (0<<0) /* 8 us */ +#define TSI148_LCSR_VCTRL_GTO_16 (1<<0) /* 16 us */ +#define TSI148_LCSR_VCTRL_GTO_32 (2<<0) /* 32 us */ +#define TSI148_LCSR_VCTRL_GTO_64 (3<<0) /* 64 us */ +#define TSI148_LCSR_VCTRL_GTO_128 (4<<0) /* 128 us */ +#define TSI148_LCSR_VCTRL_GTO_256 (5<<0) /* 256 us */ +#define TSI148_LCSR_VCTRL_GTO_512 (6<<0) /* 512 us */ +#define TSI148_LCSR_VCTRL_GTO_DIS (7<<0) /* Disabled */ + +/* + * VMEbus Status Register CRG + $23C + */ +#define TSI148_LCSR_VSTAT_CPURST (1<<15) /* Clear power up reset */ +#define TSI148_LCSR_VSTAT_BRDFL (1<<14) /* Board fail */ +#define TSI148_LCSR_VSTAT_PURSTS (1<<12) /* Power up reset status */ +#define TSI148_LCSR_VSTAT_BDFAILS (1<<11) /* Board Fail Status */ +#define TSI148_LCSR_VSTAT_SYSFAILS (1<<10) /* System Fail Status */ +#define TSI148_LCSR_VSTAT_ACFAILS (1<<9) /* AC fail status */ +#define TSI148_LCSR_VSTAT_SCONS (1<<8) /* System Cont Status */ +#define TSI148_LCSR_VSTAT_GAP (1<<5) /* Geographic Addr Parity */ +#define TSI148_LCSR_VSTAT_GA_M (0x1F<<0) /* Geographic Addr Mask */ + +/* + * PCI Configuration Status Register CRG+$240 + */ +#define TSI148_LCSR_PSTAT_REQ64S (1<<6) /* Request 64 status set */ +#define TSI148_LCSR_PSTAT_M66ENS (1<<5) /* M66ENS 66Mhz enable */ +#define TSI148_LCSR_PSTAT_FRAMES (1<<4) /* Frame Status */ +#define TSI148_LCSR_PSTAT_IRDYS (1<<3) /* IRDY status */ +#define TSI148_LCSR_PSTAT_DEVSELS (1<<2) /* DEVL status */ +#define TSI148_LCSR_PSTAT_STOPS (1<<1) /* STOP status */ +#define TSI148_LCSR_PSTAT_TRDYS (1<<0) /* TRDY status */ + +/* + * VMEbus Exception Attributes Register CRG + $268 + */ +#define TSI148_LCSR_VEAT_VES (1<<31) /* Status */ +#define TSI148_LCSR_VEAT_VEOF (1<<30) /* Overflow */ +#define TSI148_LCSR_VEAT_VESCL (1<<29) /* Status Clear */ +#define TSI148_LCSR_VEAT_2EOT (1<<21) /* 2e Odd Termination */ +#define TSI148_LCSR_VEAT_2EST (1<<20) /* 2e Slave terminated */ +#define TSI148_LCSR_VEAT_BERR (1<<19) /* Bus Error */ +#define TSI148_LCSR_VEAT_LWORD (1<<18) /* LWORD_ signal state */ +#define TSI148_LCSR_VEAT_WRITE (1<<17) /* WRITE_ signal state */ +#define TSI148_LCSR_VEAT_IACK (1<<16) /* IACK_ signal state */ +#define TSI148_LCSR_VEAT_DS1 (1<<15) /* DS1_ signal state */ +#define TSI148_LCSR_VEAT_DS0 (1<<14) /* DS0_ signal state */ +#define TSI148_LCSR_VEAT_AM_M (0x3F<<8) /* Address Mode Mask */ +#define TSI148_LCSR_VEAT_XAM_M (0xFF<<0) /* Master AMode Mask */ + + +/* + * VMEbus PCI Error Diagnostics PCI/X Attributes Register CRG + $280 + */ +#define TSI148_LCSR_EDPAT_EDPCL (1<<29) + +/* + * Inbound Translation Starting Address Lower + */ +#define TSI148_LCSR_ITSAL6432_M (0xFFFF<<16) /* Mask */ +#define TSI148_LCSR_ITSAL24_M (0x00FFF<<12) /* Mask */ +#define TSI148_LCSR_ITSAL16_M (0x0000FFF<<4) /* Mask */ + +/* + * Inbound Translation Ending Address Lower + */ +#define TSI148_LCSR_ITEAL6432_M (0xFFFF<<16) /* Mask */ +#define TSI148_LCSR_ITEAL24_M (0x00FFF<<12) /* Mask */ +#define TSI148_LCSR_ITEAL16_M (0x0000FFF<<4) /* Mask */ + +/* + * Inbound Translation Offset Lower + */ +#define TSI148_LCSR_ITOFFL6432_M (0xFFFF<<16) /* Mask */ +#define TSI148_LCSR_ITOFFL24_M (0xFFFFF<<12) /* Mask */ +#define TSI148_LCSR_ITOFFL16_M (0xFFFFFFF<<4) /* Mask */ + +/* + * Inbound Translation Attribute + */ +#define TSI148_LCSR_ITAT_EN (1<<31) /* Window Enable */ +#define TSI148_LCSR_ITAT_TH (1<<18) /* Prefetch Threshold */ + +#define TSI148_LCSR_ITAT_VFS_M (3<<16) /* Virtual FIFO Size Mask */ +#define TSI148_LCSR_ITAT_VFS_64 (0<<16) /* 64 bytes Virtual FIFO Size */ +#define TSI148_LCSR_ITAT_VFS_128 (1<<16) /* 128 bytes Virtual FIFO Sz */ +#define TSI148_LCSR_ITAT_VFS_256 (2<<16) /* 256 bytes Virtual FIFO Sz */ +#define TSI148_LCSR_ITAT_VFS_512 (3<<16) /* 512 bytes Virtual FIFO Sz */ + +#define TSI148_LCSR_ITAT_2eSSTM_M (7<<12) /* 2eSST Xfer Rate Mask */ +#define TSI148_LCSR_ITAT_2eSSTM_160 (0<<12) /* 160MB/s 2eSST Xfer Rate */ +#define TSI148_LCSR_ITAT_2eSSTM_267 (1<<12) /* 267MB/s 2eSST Xfer Rate */ +#define TSI148_LCSR_ITAT_2eSSTM_320 (2<<12) /* 320MB/s 2eSST Xfer Rate */ + +#define TSI148_LCSR_ITAT_2eSSTB (1<<11) /* 2eSST Bcast Xfer Protocol */ +#define TSI148_LCSR_ITAT_2eSST (1<<10) /* 2eSST Xfer Protocol */ +#define TSI148_LCSR_ITAT_2eVME (1<<9) /* 2eVME Xfer Protocol */ +#define TSI148_LCSR_ITAT_MBLT (1<<8) /* MBLT Xfer Protocol */ +#define TSI148_LCSR_ITAT_BLT (1<<7) /* BLT Xfer Protocol */ + +#define TSI148_LCSR_ITAT_AS_M (7<<4) /* Address Space Mask */ +#define TSI148_LCSR_ITAT_AS_A16 (0<<4) /* A16 Address Space */ +#define TSI148_LCSR_ITAT_AS_A24 (1<<4) /* A24 Address Space */ +#define TSI148_LCSR_ITAT_AS_A32 (2<<4) /* A32 Address Space */ +#define TSI148_LCSR_ITAT_AS_A64 (4<<4) /* A64 Address Space */ + +#define TSI148_LCSR_ITAT_SUPR (1<<3) /* Supervisor Access */ +#define TSI148_LCSR_ITAT_NPRIV (1<<2) /* Non-Priv (User) Access */ +#define TSI148_LCSR_ITAT_PGM (1<<1) /* Program Access */ +#define TSI148_LCSR_ITAT_DATA (1<<0) /* Data Access */ + +/* + * GCSR Base Address Lower Address CRG +$404 + */ +#define TSI148_LCSR_GBAL_M (0x7FFFFFF<<5) /* Mask */ + +/* + * GCSR Attribute Register CRG + $408 + */ +#define TSI148_LCSR_GCSRAT_EN (1<<7) /* Enable access to GCSR */ + +#define TSI148_LCSR_GCSRAT_AS_M (7<<4) /* Address Space Mask */ +#define TSI148_LCSR_GCSRAT_AS_A16 (0<<4) /* Address Space 16 */ +#define TSI148_LCSR_GCSRAT_AS_A24 (1<<4) /* Address Space 24 */ +#define TSI148_LCSR_GCSRAT_AS_A32 (2<<4) /* Address Space 32 */ +#define TSI148_LCSR_GCSRAT_AS_A64 (4<<4) /* Address Space 64 */ + +#define TSI148_LCSR_GCSRAT_SUPR (1<<3) /* Sup set -GCSR decoder */ +#define TSI148_LCSR_GCSRAT_NPRIV (1<<2) /* Non-Privliged set - CGSR */ +#define TSI148_LCSR_GCSRAT_PGM (1<<1) /* Program set - GCSR decoder */ +#define TSI148_LCSR_GCSRAT_DATA (1<<0) /* DATA set GCSR decoder */ + +/* + * CRG Base Address Lower Address CRG + $410 + */ +#define TSI148_LCSR_CBAL_M (0xFFFFF<<12) + +/* + * CRG Attribute Register CRG + $414 + */ +#define TSI148_LCSR_CRGAT_EN (1<<7) /* Enable PRG Access */ + +#define TSI148_LCSR_CRGAT_AS_M (7<<4) /* Address Space */ +#define TSI148_LCSR_CRGAT_AS_A16 (0<<4) /* Address Space 16 */ +#define TSI148_LCSR_CRGAT_AS_A24 (1<<4) /* Address Space 24 */ +#define TSI148_LCSR_CRGAT_AS_A32 (2<<4) /* Address Space 32 */ +#define TSI148_LCSR_CRGAT_AS_A64 (4<<4) /* Address Space 64 */ + +#define TSI148_LCSR_CRGAT_SUPR (1<<3) /* Supervisor Access */ +#define TSI148_LCSR_CRGAT_NPRIV (1<<2) /* Non-Privliged(User) Access */ +#define TSI148_LCSR_CRGAT_PGM (1<<1) /* Program Access */ +#define TSI148_LCSR_CRGAT_DATA (1<<0) /* Data Access */ + +/* + * CR/CSR Offset Lower Register CRG + $41C + */ +#define TSI148_LCSR_CROL_M (0x1FFF<<19) /* Mask */ + +/* + * CR/CSR Attribute register CRG + $420 + */ +#define TSI148_LCSR_CRAT_EN (1<<7) /* Enable access to CR/CSR */ + +/* + * Location Monitor base address lower register CRG + $428 + */ +#define TSI148_LCSR_LMBAL_M (0x7FFFFFF<<5) /* Mask */ + +/* + * Location Monitor Attribute Register CRG + $42C + */ +#define TSI148_LCSR_LMAT_EN (1<<7) /* Enable Location Monitor */ + +#define TSI148_LCSR_LMAT_AS_M (7<<4) /* Address Space MASK */ +#define TSI148_LCSR_LMAT_AS_A16 (0<<4) /* A16 */ +#define TSI148_LCSR_LMAT_AS_A24 (1<<4) /* A24 */ +#define TSI148_LCSR_LMAT_AS_A32 (2<<4) /* A32 */ +#define TSI148_LCSR_LMAT_AS_A64 (4<<4) /* A64 */ + +#define TSI148_LCSR_LMAT_SUPR (1<<3) /* Supervisor Access */ +#define TSI148_LCSR_LMAT_NPRIV (1<<2) /* Non-Priv (User) Access */ +#define TSI148_LCSR_LMAT_PGM (1<<1) /* Program Access */ +#define TSI148_LCSR_LMAT_DATA (1<<0) /* Data Access */ + +/* + * Broadcast Pulse Generator Timer Register CRG + $438 + */ +#define TSI148_LCSR_BPGTR_BPGT_M (0xFFFF<<0) /* Mask */ + +/* + * Broadcast Programmable Clock Timer Register CRG + $43C + */ +#define TSI148_LCSR_BPCTR_BPCT_M (0xFFFFFF<<0) /* Mask */ + +/* + * VMEbus Interrupt Control Register CRG + $43C + */ +#define TSI148_LCSR_VICR_CNTS_M (3<<22) /* Cntr Source MASK */ +#define TSI148_LCSR_VICR_CNTS_DIS (1<<22) /* Cntr Disable */ +#define TSI148_LCSR_VICR_CNTS_IRQ1 (2<<22) /* IRQ1 to Cntr */ +#define TSI148_LCSR_VICR_CNTS_IRQ2 (3<<22) /* IRQ2 to Cntr */ + +#define TSI148_LCSR_VICR_EDGIS_M (3<<20) /* Edge interupt MASK */ +#define TSI148_LCSR_VICR_EDGIS_DIS (1<<20) /* Edge interupt Disable */ +#define TSI148_LCSR_VICR_EDGIS_IRQ1 (2<<20) /* IRQ1 to Edge */ +#define TSI148_LCSR_VICR_EDGIS_IRQ2 (3<<20) /* IRQ2 to Edge */ + +#define TSI148_LCSR_VICR_IRQIF_M (3<<18) /* IRQ1* Function MASK */ +#define TSI148_LCSR_VICR_IRQIF_NORM (1<<18) /* Normal */ +#define TSI148_LCSR_VICR_IRQIF_PULSE (2<<18) /* Pulse Generator */ +#define TSI148_LCSR_VICR_IRQIF_PROG (3<<18) /* Programmable Clock */ +#define TSI148_LCSR_VICR_IRQIF_1U (4<<18) /* 1us Clock */ + +#define TSI148_LCSR_VICR_IRQ2F_M (3<<16) /* IRQ2* Function MASK */ +#define TSI148_LCSR_VICR_IRQ2F_NORM (1<<16) /* Normal */ +#define TSI148_LCSR_VICR_IRQ2F_PULSE (2<<16) /* Pulse Generator */ +#define TSI148_LCSR_VICR_IRQ2F_PROG (3<<16) /* Programmable Clock */ +#define TSI148_LCSR_VICR_IRQ2F_1U (4<<16) /* 1us Clock */ + +#define TSI148_LCSR_VICR_BIP (1<<15) /* Broadcast Interrupt Pulse */ + +#define TSI148_LCSR_VICR_IRQC (1<<12) /* VMEbus IRQ Clear */ +#define TSI148_LCSR_VICR_IRQS (1<<11) /* VMEbus IRQ Status */ + +#define TSI148_LCSR_VICR_IRQL_M (7<<8) /* VMEbus SW IRQ Level Mask */ +#define TSI148_LCSR_VICR_IRQL_1 (1<<8) /* VMEbus SW IRQ Level 1 */ +#define TSI148_LCSR_VICR_IRQL_2 (2<<8) /* VMEbus SW IRQ Level 2 */ +#define TSI148_LCSR_VICR_IRQL_3 (3<<8) /* VMEbus SW IRQ Level 3 */ +#define TSI148_LCSR_VICR_IRQL_4 (4<<8) /* VMEbus SW IRQ Level 4 */ +#define TSI148_LCSR_VICR_IRQL_5 (5<<8) /* VMEbus SW IRQ Level 5 */ +#define TSI148_LCSR_VICR_IRQL_6 (6<<8) /* VMEbus SW IRQ Level 6 */ +#define TSI148_LCSR_VICR_IRQL_7 (7<<8) /* VMEbus SW IRQ Level 7 */ + +static const int TSI148_LCSR_VICR_IRQL[8] = { 0, TSI148_LCSR_VICR_IRQL_1, + TSI148_LCSR_VICR_IRQL_2, TSI148_LCSR_VICR_IRQL_3, + TSI148_LCSR_VICR_IRQL_4, TSI148_LCSR_VICR_IRQL_5, + TSI148_LCSR_VICR_IRQL_6, TSI148_LCSR_VICR_IRQL_7 }; + +#define TSI148_LCSR_VICR_STID_M (0xFF<<0) /* Status/ID Mask */ + +/* + * Interrupt Enable Register CRG + $440 + */ +#define TSI148_LCSR_INTEN_DMA1EN (1<<25) /* DMAC 1 */ +#define TSI148_LCSR_INTEN_DMA0EN (1<<24) /* DMAC 0 */ +#define TSI148_LCSR_INTEN_LM3EN (1<<23) /* Location Monitor 3 */ +#define TSI148_LCSR_INTEN_LM2EN (1<<22) /* Location Monitor 2 */ +#define TSI148_LCSR_INTEN_LM1EN (1<<21) /* Location Monitor 1 */ +#define TSI148_LCSR_INTEN_LM0EN (1<<20) /* Location Monitor 0 */ +#define TSI148_LCSR_INTEN_MB3EN (1<<19) /* Mail Box 3 */ +#define TSI148_LCSR_INTEN_MB2EN (1<<18) /* Mail Box 2 */ +#define TSI148_LCSR_INTEN_MB1EN (1<<17) /* Mail Box 1 */ +#define TSI148_LCSR_INTEN_MB0EN (1<<16) /* Mail Box 0 */ +#define TSI148_LCSR_INTEN_PERREN (1<<13) /* PCI/X Error */ +#define TSI148_LCSR_INTEN_VERREN (1<<12) /* VMEbus Error */ +#define TSI148_LCSR_INTEN_VIEEN (1<<11) /* VMEbus IRQ Edge */ +#define TSI148_LCSR_INTEN_IACKEN (1<<10) /* IACK */ +#define TSI148_LCSR_INTEN_SYSFLEN (1<<9) /* System Fail */ +#define TSI148_LCSR_INTEN_ACFLEN (1<<8) /* AC Fail */ +#define TSI148_LCSR_INTEN_IRQ7EN (1<<7) /* IRQ7 */ +#define TSI148_LCSR_INTEN_IRQ6EN (1<<6) /* IRQ6 */ +#define TSI148_LCSR_INTEN_IRQ5EN (1<<5) /* IRQ5 */ +#define TSI148_LCSR_INTEN_IRQ4EN (1<<4) /* IRQ4 */ +#define TSI148_LCSR_INTEN_IRQ3EN (1<<3) /* IRQ3 */ +#define TSI148_LCSR_INTEN_IRQ2EN (1<<2) /* IRQ2 */ +#define TSI148_LCSR_INTEN_IRQ1EN (1<<1) /* IRQ1 */ + +static const int TSI148_LCSR_INTEN_LMEN[4] = { TSI148_LCSR_INTEN_LM0EN, + TSI148_LCSR_INTEN_LM1EN, + TSI148_LCSR_INTEN_LM2EN, + TSI148_LCSR_INTEN_LM3EN }; + +static const int TSI148_LCSR_INTEN_IRQEN[7] = { TSI148_LCSR_INTEN_IRQ1EN, + TSI148_LCSR_INTEN_IRQ2EN, + TSI148_LCSR_INTEN_IRQ3EN, + TSI148_LCSR_INTEN_IRQ4EN, + TSI148_LCSR_INTEN_IRQ5EN, + TSI148_LCSR_INTEN_IRQ6EN, + TSI148_LCSR_INTEN_IRQ7EN }; + +/* + * Interrupt Enable Out Register CRG + $444 + */ +#define TSI148_LCSR_INTEO_DMA1EO (1<<25) /* DMAC 1 */ +#define TSI148_LCSR_INTEO_DMA0EO (1<<24) /* DMAC 0 */ +#define TSI148_LCSR_INTEO_LM3EO (1<<23) /* Loc Monitor 3 */ +#define TSI148_LCSR_INTEO_LM2EO (1<<22) /* Loc Monitor 2 */ +#define TSI148_LCSR_INTEO_LM1EO (1<<21) /* Loc Monitor 1 */ +#define TSI148_LCSR_INTEO_LM0EO (1<<20) /* Location Monitor 0 */ +#define TSI148_LCSR_INTEO_MB3EO (1<<19) /* Mail Box 3 */ +#define TSI148_LCSR_INTEO_MB2EO (1<<18) /* Mail Box 2 */ +#define TSI148_LCSR_INTEO_MB1EO (1<<17) /* Mail Box 1 */ +#define TSI148_LCSR_INTEO_MB0EO (1<<16) /* Mail Box 0 */ +#define TSI148_LCSR_INTEO_PERREO (1<<13) /* PCI/X Error */ +#define TSI148_LCSR_INTEO_VERREO (1<<12) /* VMEbus Error */ +#define TSI148_LCSR_INTEO_VIEEO (1<<11) /* VMEbus IRQ Edge */ +#define TSI148_LCSR_INTEO_IACKEO (1<<10) /* IACK */ +#define TSI148_LCSR_INTEO_SYSFLEO (1<<9) /* System Fail */ +#define TSI148_LCSR_INTEO_ACFLEO (1<<8) /* AC Fail */ +#define TSI148_LCSR_INTEO_IRQ7EO (1<<7) /* IRQ7 */ +#define TSI148_LCSR_INTEO_IRQ6EO (1<<6) /* IRQ6 */ +#define TSI148_LCSR_INTEO_IRQ5EO (1<<5) /* IRQ5 */ +#define TSI148_LCSR_INTEO_IRQ4EO (1<<4) /* IRQ4 */ +#define TSI148_LCSR_INTEO_IRQ3EO (1<<3) /* IRQ3 */ +#define TSI148_LCSR_INTEO_IRQ2EO (1<<2) /* IRQ2 */ +#define TSI148_LCSR_INTEO_IRQ1EO (1<<1) /* IRQ1 */ + +static const int TSI148_LCSR_INTEO_LMEO[4] = { TSI148_LCSR_INTEO_LM0EO, + TSI148_LCSR_INTEO_LM1EO, + TSI148_LCSR_INTEO_LM2EO, + TSI148_LCSR_INTEO_LM3EO }; + +static const int TSI148_LCSR_INTEO_IRQEO[7] = { TSI148_LCSR_INTEO_IRQ1EO, + TSI148_LCSR_INTEO_IRQ2EO, + TSI148_LCSR_INTEO_IRQ3EO, + TSI148_LCSR_INTEO_IRQ4EO, + TSI148_LCSR_INTEO_IRQ5EO, + TSI148_LCSR_INTEO_IRQ6EO, + TSI148_LCSR_INTEO_IRQ7EO }; + +/* + * Interrupt Status Register CRG + $448 + */ +#define TSI148_LCSR_INTS_DMA1S (1<<25) /* DMA 1 */ +#define TSI148_LCSR_INTS_DMA0S (1<<24) /* DMA 0 */ +#define TSI148_LCSR_INTS_LM3S (1<<23) /* Location Monitor 3 */ +#define TSI148_LCSR_INTS_LM2S (1<<22) /* Location Monitor 2 */ +#define TSI148_LCSR_INTS_LM1S (1<<21) /* Location Monitor 1 */ +#define TSI148_LCSR_INTS_LM0S (1<<20) /* Location Monitor 0 */ +#define TSI148_LCSR_INTS_MB3S (1<<19) /* Mail Box 3 */ +#define TSI148_LCSR_INTS_MB2S (1<<18) /* Mail Box 2 */ +#define TSI148_LCSR_INTS_MB1S (1<<17) /* Mail Box 1 */ +#define TSI148_LCSR_INTS_MB0S (1<<16) /* Mail Box 0 */ +#define TSI148_LCSR_INTS_PERRS (1<<13) /* PCI/X Error */ +#define TSI148_LCSR_INTS_VERRS (1<<12) /* VMEbus Error */ +#define TSI148_LCSR_INTS_VIES (1<<11) /* VMEbus IRQ Edge */ +#define TSI148_LCSR_INTS_IACKS (1<<10) /* IACK */ +#define TSI148_LCSR_INTS_SYSFLS (1<<9) /* System Fail */ +#define TSI148_LCSR_INTS_ACFLS (1<<8) /* AC Fail */ +#define TSI148_LCSR_INTS_IRQ7S (1<<7) /* IRQ7 */ +#define TSI148_LCSR_INTS_IRQ6S (1<<6) /* IRQ6 */ +#define TSI148_LCSR_INTS_IRQ5S (1<<5) /* IRQ5 */ +#define TSI148_LCSR_INTS_IRQ4S (1<<4) /* IRQ4 */ +#define TSI148_LCSR_INTS_IRQ3S (1<<3) /* IRQ3 */ +#define TSI148_LCSR_INTS_IRQ2S (1<<2) /* IRQ2 */ +#define TSI148_LCSR_INTS_IRQ1S (1<<1) /* IRQ1 */ + +static const int TSI148_LCSR_INTS_LMS[4] = { TSI148_LCSR_INTS_LM0S, + TSI148_LCSR_INTS_LM1S, + TSI148_LCSR_INTS_LM2S, + TSI148_LCSR_INTS_LM3S }; + +static const int TSI148_LCSR_INTS_MBS[4] = { TSI148_LCSR_INTS_MB0S, + TSI148_LCSR_INTS_MB1S, + TSI148_LCSR_INTS_MB2S, + TSI148_LCSR_INTS_MB3S }; + +/* + * Interrupt Clear Register CRG + $44C + */ +#define TSI148_LCSR_INTC_DMA1C (1<<25) /* DMA 1 */ +#define TSI148_LCSR_INTC_DMA0C (1<<24) /* DMA 0 */ +#define TSI148_LCSR_INTC_LM3C (1<<23) /* Location Monitor 3 */ +#define TSI148_LCSR_INTC_LM2C (1<<22) /* Location Monitor 2 */ +#define TSI148_LCSR_INTC_LM1C (1<<21) /* Location Monitor 1 */ +#define TSI148_LCSR_INTC_LM0C (1<<20) /* Location Monitor 0 */ +#define TSI148_LCSR_INTC_MB3C (1<<19) /* Mail Box 3 */ +#define TSI148_LCSR_INTC_MB2C (1<<18) /* Mail Box 2 */ +#define TSI148_LCSR_INTC_MB1C (1<<17) /* Mail Box 1 */ +#define TSI148_LCSR_INTC_MB0C (1<<16) /* Mail Box 0 */ +#define TSI148_LCSR_INTC_PERRC (1<<13) /* VMEbus Error */ +#define TSI148_LCSR_INTC_VERRC (1<<12) /* VMEbus Access Time-out */ +#define TSI148_LCSR_INTC_VIEC (1<<11) /* VMEbus IRQ Edge */ +#define TSI148_LCSR_INTC_IACKC (1<<10) /* IACK */ +#define TSI148_LCSR_INTC_SYSFLC (1<<9) /* System Fail */ +#define TSI148_LCSR_INTC_ACFLC (1<<8) /* AC Fail */ + +static const int TSI148_LCSR_INTC_LMC[4] = { TSI148_LCSR_INTC_LM0C, + TSI148_LCSR_INTC_LM1C, + TSI148_LCSR_INTC_LM2C, + TSI148_LCSR_INTC_LM3C }; + +static const int TSI148_LCSR_INTC_MBC[4] = { TSI148_LCSR_INTC_MB0C, + TSI148_LCSR_INTC_MB1C, + TSI148_LCSR_INTC_MB2C, + TSI148_LCSR_INTC_MB3C }; + +/* + * Interrupt Map Register 1 CRG + $458 + */ +#define TSI148_LCSR_INTM1_DMA1M_M (3<<18) /* DMA 1 */ +#define TSI148_LCSR_INTM1_DMA0M_M (3<<16) /* DMA 0 */ +#define TSI148_LCSR_INTM1_LM3M_M (3<<14) /* Location Monitor 3 */ +#define TSI148_LCSR_INTM1_LM2M_M (3<<12) /* Location Monitor 2 */ +#define TSI148_LCSR_INTM1_LM1M_M (3<<10) /* Location Monitor 1 */ +#define TSI148_LCSR_INTM1_LM0M_M (3<<8) /* Location Monitor 0 */ +#define TSI148_LCSR_INTM1_MB3M_M (3<<6) /* Mail Box 3 */ +#define TSI148_LCSR_INTM1_MB2M_M (3<<4) /* Mail Box 2 */ +#define TSI148_LCSR_INTM1_MB1M_M (3<<2) /* Mail Box 1 */ +#define TSI148_LCSR_INTM1_MB0M_M (3<<0) /* Mail Box 0 */ + +/* + * Interrupt Map Register 2 CRG + $45C + */ +#define TSI148_LCSR_INTM2_PERRM_M (3<<26) /* PCI Bus Error */ +#define TSI148_LCSR_INTM2_VERRM_M (3<<24) /* VMEbus Error */ +#define TSI148_LCSR_INTM2_VIEM_M (3<<22) /* VMEbus IRQ Edge */ +#define TSI148_LCSR_INTM2_IACKM_M (3<<20) /* IACK */ +#define TSI148_LCSR_INTM2_SYSFLM_M (3<<18) /* System Fail */ +#define TSI148_LCSR_INTM2_ACFLM_M (3<<16) /* AC Fail */ +#define TSI148_LCSR_INTM2_IRQ7M_M (3<<14) /* IRQ7 */ +#define TSI148_LCSR_INTM2_IRQ6M_M (3<<12) /* IRQ6 */ +#define TSI148_LCSR_INTM2_IRQ5M_M (3<<10) /* IRQ5 */ +#define TSI148_LCSR_INTM2_IRQ4M_M (3<<8) /* IRQ4 */ +#define TSI148_LCSR_INTM2_IRQ3M_M (3<<6) /* IRQ3 */ +#define TSI148_LCSR_INTM2_IRQ2M_M (3<<4) /* IRQ2 */ +#define TSI148_LCSR_INTM2_IRQ1M_M (3<<2) /* IRQ1 */ + +/* + * DMA Control (0-1) Registers CRG + $500 + */ +#define TSI148_LCSR_DCTL_ABT (1<<27) /* Abort */ +#define TSI148_LCSR_DCTL_PAU (1<<26) /* Pause */ +#define TSI148_LCSR_DCTL_DGO (1<<25) /* DMA Go */ + +#define TSI148_LCSR_DCTL_MOD (1<<23) /* Mode */ + +#define TSI148_LCSR_DCTL_VBKS_M (7<<12) /* VMEbus block Size MASK */ +#define TSI148_LCSR_DCTL_VBKS_32 (0<<12) /* VMEbus block Size 32 */ +#define TSI148_LCSR_DCTL_VBKS_64 (1<<12) /* VMEbus block Size 64 */ +#define TSI148_LCSR_DCTL_VBKS_128 (2<<12) /* VMEbus block Size 128 */ +#define TSI148_LCSR_DCTL_VBKS_256 (3<<12) /* VMEbus block Size 256 */ +#define TSI148_LCSR_DCTL_VBKS_512 (4<<12) /* VMEbus block Size 512 */ +#define TSI148_LCSR_DCTL_VBKS_1024 (5<<12) /* VMEbus block Size 1024 */ +#define TSI148_LCSR_DCTL_VBKS_2048 (6<<12) /* VMEbus block Size 2048 */ +#define TSI148_LCSR_DCTL_VBKS_4096 (7<<12) /* VMEbus block Size 4096 */ + +#define TSI148_LCSR_DCTL_VBOT_M (7<<8) /* VMEbus back-off MASK */ +#define TSI148_LCSR_DCTL_VBOT_0 (0<<8) /* VMEbus back-off 0us */ +#define TSI148_LCSR_DCTL_VBOT_1 (1<<8) /* VMEbus back-off 1us */ +#define TSI148_LCSR_DCTL_VBOT_2 (2<<8) /* VMEbus back-off 2us */ +#define TSI148_LCSR_DCTL_VBOT_4 (3<<8) /* VMEbus back-off 4us */ +#define TSI148_LCSR_DCTL_VBOT_8 (4<<8) /* VMEbus back-off 8us */ +#define TSI148_LCSR_DCTL_VBOT_16 (5<<8) /* VMEbus back-off 16us */ +#define TSI148_LCSR_DCTL_VBOT_32 (6<<8) /* VMEbus back-off 32us */ +#define TSI148_LCSR_DCTL_VBOT_64 (7<<8) /* VMEbus back-off 64us */ + +#define TSI148_LCSR_DCTL_PBKS_M (7<<4) /* PCI block size MASK */ +#define TSI148_LCSR_DCTL_PBKS_32 (0<<4) /* PCI block size 32 bytes */ +#define TSI148_LCSR_DCTL_PBKS_64 (1<<4) /* PCI block size 64 bytes */ +#define TSI148_LCSR_DCTL_PBKS_128 (2<<4) /* PCI block size 128 bytes */ +#define TSI148_LCSR_DCTL_PBKS_256 (3<<4) /* PCI block size 256 bytes */ +#define TSI148_LCSR_DCTL_PBKS_512 (4<<4) /* PCI block size 512 bytes */ +#define TSI148_LCSR_DCTL_PBKS_1024 (5<<4) /* PCI block size 1024 bytes */ +#define TSI148_LCSR_DCTL_PBKS_2048 (6<<4) /* PCI block size 2048 bytes */ +#define TSI148_LCSR_DCTL_PBKS_4096 (7<<4) /* PCI block size 4096 bytes */ + +#define TSI148_LCSR_DCTL_PBOT_M (7<<0) /* PCI back off MASK */ +#define TSI148_LCSR_DCTL_PBOT_0 (0<<0) /* PCI back off 0us */ +#define TSI148_LCSR_DCTL_PBOT_1 (1<<0) /* PCI back off 1us */ +#define TSI148_LCSR_DCTL_PBOT_2 (2<<0) /* PCI back off 2us */ +#define TSI148_LCSR_DCTL_PBOT_4 (3<<0) /* PCI back off 3us */ +#define TSI148_LCSR_DCTL_PBOT_8 (4<<0) /* PCI back off 4us */ +#define TSI148_LCSR_DCTL_PBOT_16 (5<<0) /* PCI back off 8us */ +#define TSI148_LCSR_DCTL_PBOT_32 (6<<0) /* PCI back off 16us */ +#define TSI148_LCSR_DCTL_PBOT_64 (7<<0) /* PCI back off 32us */ + +/* + * DMA Status Registers (0-1) CRG + $504 + */ +#define TSI148_LCSR_DSTA_SMA (1<<31) /* PCI Signalled Master Abt */ +#define TSI148_LCSR_DSTA_RTA (1<<30) /* PCI Received Target Abt */ +#define TSI148_LCSR_DSTA_MRC (1<<29) /* PCI Max Retry Count */ +#define TSI148_LCSR_DSTA_VBE (1<<28) /* VMEbus error */ +#define TSI148_LCSR_DSTA_ABT (1<<27) /* Abort */ +#define TSI148_LCSR_DSTA_PAU (1<<26) /* Pause */ +#define TSI148_LCSR_DSTA_DON (1<<25) /* Done */ +#define TSI148_LCSR_DSTA_BSY (1<<24) /* Busy */ + +/* + * DMA Current Link Address Lower (0-1) + */ +#define TSI148_LCSR_DCLAL_M (0x3FFFFFF<<6) /* Mask */ + +/* + * DMA Source Attribute (0-1) Reg + */ +#define TSI148_LCSR_DSAT_TYP_M (3<<28) /* Source Bus Type */ +#define TSI148_LCSR_DSAT_TYP_PCI (0<<28) /* PCI Bus */ +#define TSI148_LCSR_DSAT_TYP_VME (1<<28) /* VMEbus */ +#define TSI148_LCSR_DSAT_TYP_PAT (2<<28) /* Data Pattern */ + +#define TSI148_LCSR_DSAT_PSZ (1<<25) /* Pattern Size */ +#define TSI148_LCSR_DSAT_NIN (1<<24) /* No Increment */ + +#define TSI148_LCSR_DSAT_2eSSTM_M (3<<11) /* 2eSST Trans Rate Mask */ +#define TSI148_LCSR_DSAT_2eSSTM_160 (0<<11) /* 160 MB/s */ +#define TSI148_LCSR_DSAT_2eSSTM_267 (1<<11) /* 267 MB/s */ +#define TSI148_LCSR_DSAT_2eSSTM_320 (2<<11) /* 320 MB/s */ + +#define TSI148_LCSR_DSAT_TM_M (7<<8) /* Bus Transfer Protocol Mask */ +#define TSI148_LCSR_DSAT_TM_SCT (0<<8) /* SCT */ +#define TSI148_LCSR_DSAT_TM_BLT (1<<8) /* BLT */ +#define TSI148_LCSR_DSAT_TM_MBLT (2<<8) /* MBLT */ +#define TSI148_LCSR_DSAT_TM_2eVME (3<<8) /* 2eVME */ +#define TSI148_LCSR_DSAT_TM_2eSST (4<<8) /* 2eSST */ +#define TSI148_LCSR_DSAT_TM_2eSSTB (5<<8) /* 2eSST Broadcast */ + +#define TSI148_LCSR_DSAT_DBW_M (3<<6) /* Max Data Width MASK */ +#define TSI148_LCSR_DSAT_DBW_16 (0<<6) /* 16 Bits */ +#define TSI148_LCSR_DSAT_DBW_32 (1<<6) /* 32 Bits */ + +#define TSI148_LCSR_DSAT_SUP (1<<5) /* Supervisory Mode */ +#define TSI148_LCSR_DSAT_PGM (1<<4) /* Program Mode */ + +#define TSI148_LCSR_DSAT_AMODE_M (0xf<<0) /* Address Space Mask */ +#define TSI148_LCSR_DSAT_AMODE_A16 (0<<0) /* A16 */ +#define TSI148_LCSR_DSAT_AMODE_A24 (1<<0) /* A24 */ +#define TSI148_LCSR_DSAT_AMODE_A32 (2<<0) /* A32 */ +#define TSI148_LCSR_DSAT_AMODE_A64 (4<<0) /* A64 */ +#define TSI148_LCSR_DSAT_AMODE_CRCSR (5<<0) /* CR/CSR */ +#define TSI148_LCSR_DSAT_AMODE_USER1 (8<<0) /* User1 */ +#define TSI148_LCSR_DSAT_AMODE_USER2 (9<<0) /* User2 */ +#define TSI148_LCSR_DSAT_AMODE_USER3 (0xa<<0) /* User3 */ +#define TSI148_LCSR_DSAT_AMODE_USER4 (0xb<<0) /* User4 */ + +/* + * DMA Destination Attribute Registers (0-1) + */ +#define TSI148_LCSR_DDAT_TYP_PCI (0<<28) /* Destination PCI Bus */ +#define TSI148_LCSR_DDAT_TYP_VME (1<<28) /* Destination VMEbus */ + +#define TSI148_LCSR_DDAT_2eSSTM_M (3<<11) /* 2eSST Transfer Rate Mask */ +#define TSI148_LCSR_DDAT_2eSSTM_160 (0<<11) /* 160 MB/s */ +#define TSI148_LCSR_DDAT_2eSSTM_267 (1<<11) /* 267 MB/s */ +#define TSI148_LCSR_DDAT_2eSSTM_320 (2<<11) /* 320 MB/s */ + +#define TSI148_LCSR_DDAT_TM_M (7<<8) /* Bus Transfer Protocol Mask */ +#define TSI148_LCSR_DDAT_TM_SCT (0<<8) /* SCT */ +#define TSI148_LCSR_DDAT_TM_BLT (1<<8) /* BLT */ +#define TSI148_LCSR_DDAT_TM_MBLT (2<<8) /* MBLT */ +#define TSI148_LCSR_DDAT_TM_2eVME (3<<8) /* 2eVME */ +#define TSI148_LCSR_DDAT_TM_2eSST (4<<8) /* 2eSST */ +#define TSI148_LCSR_DDAT_TM_2eSSTB (5<<8) /* 2eSST Broadcast */ + +#define TSI148_LCSR_DDAT_DBW_M (3<<6) /* Max Data Width MASK */ +#define TSI148_LCSR_DDAT_DBW_16 (0<<6) /* 16 Bits */ +#define TSI148_LCSR_DDAT_DBW_32 (1<<6) /* 32 Bits */ + +#define TSI148_LCSR_DDAT_SUP (1<<5) /* Supervisory/User Access */ +#define TSI148_LCSR_DDAT_PGM (1<<4) /* Program/Data Access */ + +#define TSI148_LCSR_DDAT_AMODE_M (0xf<<0) /* Address Space Mask */ +#define TSI148_LCSR_DDAT_AMODE_A16 (0<<0) /* A16 */ +#define TSI148_LCSR_DDAT_AMODE_A24 (1<<0) /* A24 */ +#define TSI148_LCSR_DDAT_AMODE_A32 (2<<0) /* A32 */ +#define TSI148_LCSR_DDAT_AMODE_A64 (4<<0) /* A64 */ +#define TSI148_LCSR_DDAT_AMODE_CRCSR (5<<0) /* CRC/SR */ +#define TSI148_LCSR_DDAT_AMODE_USER1 (8<<0) /* User1 */ +#define TSI148_LCSR_DDAT_AMODE_USER2 (9<<0) /* User2 */ +#define TSI148_LCSR_DDAT_AMODE_USER3 (0xa<<0) /* User3 */ +#define TSI148_LCSR_DDAT_AMODE_USER4 (0xb<<0) /* User4 */ + +/* + * DMA Next Link Address Lower + */ +#define TSI148_LCSR_DNLAL_DNLAL_M (0x3FFFFFF<<6) /* Address Mask */ +#define TSI148_LCSR_DNLAL_LLA (1<<0) /* Last Link Address Indicator */ + +/* + * DMA 2eSST Broadcast Select + */ +#define TSI148_LCSR_DBS_M (0x1FFFFF<<0) /* Mask */ + +/* + * GCSR Register Group + */ + +/* + * GCSR Control and Status Register CRG + $604 + */ +#define TSI148_GCSR_GCTRL_LRST (1<<15) /* Local Reset */ +#define TSI148_GCSR_GCTRL_SFAILEN (1<<14) /* System Fail enable */ +#define TSI148_GCSR_GCTRL_BDFAILS (1<<13) /* Board Fail Status */ +#define TSI148_GCSR_GCTRL_SCON (1<<12) /* System Copntroller */ +#define TSI148_GCSR_GCTRL_MEN (1<<11) /* Module Enable (READY) */ + +#define TSI148_GCSR_GCTRL_LMI3S (1<<7) /* Loc Monitor 3 Int Status */ +#define TSI148_GCSR_GCTRL_LMI2S (1<<6) /* Loc Monitor 2 Int Status */ +#define TSI148_GCSR_GCTRL_LMI1S (1<<5) /* Loc Monitor 1 Int Status */ +#define TSI148_GCSR_GCTRL_LMI0S (1<<4) /* Loc Monitor 0 Int Status */ +#define TSI148_GCSR_GCTRL_MBI3S (1<<3) /* Mail box 3 Int Status */ +#define TSI148_GCSR_GCTRL_MBI2S (1<<2) /* Mail box 2 Int Status */ +#define TSI148_GCSR_GCTRL_MBI1S (1<<1) /* Mail box 1 Int Status */ +#define TSI148_GCSR_GCTRL_MBI0S (1<<0) /* Mail box 0 Int Status */ + +#define TSI148_GCSR_GAP (1<<5) /* Geographic Addr Parity */ +#define TSI148_GCSR_GA_M (0x1F<<0) /* Geographic Address Mask */ + +/* + * CR/CSR Register Group + */ + +/* + * CR/CSR Bit Clear Register CRG + $FF4 + */ +#define TSI148_CRCSR_CSRBCR_LRSTC (1<<7) /* Local Reset Clear */ +#define TSI148_CRCSR_CSRBCR_SFAILC (1<<6) /* System Fail Enable Clear */ +#define TSI148_CRCSR_CSRBCR_BDFAILS (1<<5) /* Board Fail Status */ +#define TSI148_CRCSR_CSRBCR_MENC (1<<4) /* Module Enable Clear */ +#define TSI148_CRCSR_CSRBCR_BERRSC (1<<3) /* Bus Error Status Clear */ + +/* + * CR/CSR Bit Set Register CRG+$FF8 + */ +#define TSI148_CRCSR_CSRBSR_LISTS (1<<7) /* Local Reset Clear */ +#define TSI148_CRCSR_CSRBSR_SFAILS (1<<6) /* System Fail Enable Clear */ +#define TSI148_CRCSR_CSRBSR_BDFAILS (1<<5) /* Board Fail Status */ +#define TSI148_CRCSR_CSRBSR_MENS (1<<4) /* Module Enable Clear */ +#define TSI148_CRCSR_CSRBSR_BERRS (1<<3) /* Bus Error Status Clear */ + +/* + * CR/CSR Base Address Register CRG + FFC + */ +#define TSI148_CRCSR_CBAR_M (0x1F<<3) /* Mask */ + +#endif /* TSI148_H */ diff --git a/drivers/staging/vme/devices/Kconfig b/drivers/staging/vme/devices/Kconfig new file mode 100644 index 0000000..ca5ba89 --- /dev/null +++ b/drivers/staging/vme/devices/Kconfig @@ -0,0 +1,8 @@ +comment "VME Device Drivers" + +config VME_USER + tristate "VME user space access driver" + help + If you say Y here you want to be able to access a limited number of + VME windows in a manner at least semi-compatible with the interface + provided with the original driver at http://vmelinux.org/. diff --git a/drivers/staging/vme/devices/Makefile b/drivers/staging/vme/devices/Makefile new file mode 100644 index 0000000..459742a --- /dev/null +++ b/drivers/staging/vme/devices/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the VME device drivers. +# + +obj-$(CONFIG_VME_USER) += vme_user.o diff --git a/drivers/staging/vme/devices/vme_user.c b/drivers/staging/vme/devices/vme_user.c new file mode 100644 index 0000000..7891288 --- /dev/null +++ b/drivers/staging/vme/devices/vme_user.c @@ -0,0 +1,826 @@ +/* + * VMEbus User access driver + * + * Author: Martyn Welch <martyn.welch@gefanuc.com> + * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * + * Based on work by: + * Tom Armistead and Ajit Prem + * Copyright 2004 Motorola Inc. + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/cdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/ioctl.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/pagemap.h> +#include <linux/pci.h> +#include <linux/semaphore.h> +#include <linux/spinlock.h> +#include <linux/syscalls.h> +#include <linux/types.h> +#include <linux/version.h> + +#include <asm/io.h> +#include <asm/uaccess.h> + +#include "../vme.h" +#include "vme_user.h" + +static char driver_name[] = "vme_user"; + +static int bus[USER_BUS_MAX]; +static int bus_num; + +/* Currently Documentation/devices.txt defines the following for VME: + * + * 221 char VME bus + * 0 = /dev/bus/vme/m0 First master image + * 1 = /dev/bus/vme/m1 Second master image + * 2 = /dev/bus/vme/m2 Third master image + * 3 = /dev/bus/vme/m3 Fourth master image + * 4 = /dev/bus/vme/s0 First slave image + * 5 = /dev/bus/vme/s1 Second slave image + * 6 = /dev/bus/vme/s2 Third slave image + * 7 = /dev/bus/vme/s3 Fourth slave image + * 8 = /dev/bus/vme/ctl Control + * + * It is expected that all VME bus drivers will use the + * same interface. For interface documentation see + * http://www.vmelinux.org/. + * + * However the VME driver at http://www.vmelinux.org/ is rather old and doesn't + * even support the tsi148 chipset (which has 8 master and 8 slave windows). + * We'll run with this or now as far as possible, however it probably makes + * sense to get rid of the old mappings and just do everything dynamically. + * + * So for now, we'll restrict the driver to providing 4 masters and 4 slaves as + * defined above and try to support at least some of the interface from + * http://www.vmelinux.org/ as an alternative drive can be written providing a + * saner interface later. + * + * The vmelinux.org driver never supported slave images, the devices reserved + * for slaves were repurposed to support all 8 master images on the UniverseII! + * We shall support 4 masters and 4 slaves with this driver. + */ +#define VME_MAJOR 221 /* VME Major Device Number */ +#define VME_DEVS 9 /* Number of dev entries */ + +#define MASTER_MINOR 0 +#define MASTER_MAX 3 +#define SLAVE_MINOR 4 +#define SLAVE_MAX 7 +#define CONTROL_MINOR 8 + +#define PCI_BUF_SIZE 0x20000 /* Size of one slave image buffer */ + +/* + * Structure to handle image related parameters. + */ +typedef struct { + void __iomem *kern_buf; /* Buffer address in kernel space */ + dma_addr_t pci_buf; /* Buffer address in PCI address space */ + unsigned long long size_buf; /* Buffer size */ + struct semaphore sem; /* Semaphore for locking image */ + struct device *device; /* Sysfs device */ + struct vme_resource *resource; /* VME resource */ + int users; /* Number of current users */ +} image_desc_t; +static image_desc_t image[VME_DEVS]; + +typedef struct { + unsigned long reads; + unsigned long writes; + unsigned long ioctls; + unsigned long irqs; + unsigned long berrs; + unsigned long dmaErrors; + unsigned long timeouts; + unsigned long external; +} driver_stats_t; +static driver_stats_t statistics; + +struct cdev *vme_user_cdev; /* Character device */ +struct class *vme_user_sysfs_class; /* Sysfs class */ +struct device *vme_user_bridge; /* Pointer to the bridge device */ + + +static const int type[VME_DEVS] = { MASTER_MINOR, MASTER_MINOR, + MASTER_MINOR, MASTER_MINOR, + SLAVE_MINOR, SLAVE_MINOR, + SLAVE_MINOR, SLAVE_MINOR, + CONTROL_MINOR + }; + + +static int vme_user_open(struct inode *, struct file *); +static int vme_user_release(struct inode *, struct file *); +static ssize_t vme_user_read(struct file *, char *, size_t, loff_t *); +static ssize_t vme_user_write(struct file *, const char *, size_t, loff_t *); +static loff_t vme_user_llseek(struct file *, loff_t, int); +static int vme_user_ioctl(struct inode *, struct file *, unsigned int, + unsigned long); + +static int __init vme_user_probe(struct device *, int, int); +static int __exit vme_user_remove(struct device *, int, int); + +static struct file_operations vme_user_fops = { + .open = vme_user_open, + .release = vme_user_release, + .read = vme_user_read, + .write = vme_user_write, + .llseek = vme_user_llseek, + .ioctl = vme_user_ioctl, +}; + + +/* + * Reset all the statistic counters + */ +static void reset_counters(void) +{ + statistics.reads = 0; + statistics.writes = 0; + statistics.ioctls = 0; + statistics.irqs = 0; + statistics.berrs = 0; + statistics.dmaErrors = 0; + statistics.timeouts = 0; +} + +static int vme_user_open(struct inode *inode, struct file *file) +{ + int err; + unsigned int minor = MINOR(inode->i_rdev); + + down(&image[minor].sem); + /* Only allow device to be opened if a resource is allocated */ + if (image[minor].resource == NULL) { + printk(KERN_ERR "No resources allocated for device\n"); + err = -EINVAL; + goto err_res; + } + + /* Increment user count */ + image[minor].users++; + + up(&image[minor].sem); + + return 0; + +err_res: + up(&image[minor].sem); + + return err; +} + +static int vme_user_release(struct inode *inode, struct file *file) +{ + unsigned int minor = MINOR(inode->i_rdev); + + down(&image[minor].sem); + + /* Decrement user count */ + image[minor].users--; + + up(&image[minor].sem); + + return 0; +} + +/* + * We are going ot alloc a page during init per window for small transfers. + * Small transfers will go VME -> buffer -> user space. Larger (more than a + * page) transfers will lock the user space buffer into memory and then + * transfer the data directly into the user space buffers. + */ +static ssize_t resource_to_user(int minor, char __user *buf, size_t count, + loff_t *ppos) +{ + ssize_t retval; + ssize_t copied = 0; + + if (count <= image[minor].size_buf) { + /* We copy to kernel buffer */ + copied = vme_master_read(image[minor].resource, + image[minor].kern_buf, count, *ppos); + if (copied < 0) { + return (int)copied; + } + + retval = __copy_to_user(buf, image[minor].kern_buf, + (unsigned long)copied); + if (retval != 0) { + copied = (copied - retval); + printk("User copy failed\n"); + return -EINVAL; + } + + } else { + /* XXX Need to write this */ + printk("Currently don't support large transfers\n"); + /* Map in pages from userspace */ + + /* Call vme_master_read to do the transfer */ + return -EINVAL; + } + + return copied; +} + +/* + * We are going ot alloc a page during init per window for small transfers. + * Small transfers will go user space -> buffer -> VME. Larger (more than a + * page) transfers will lock the user space buffer into memory and then + * transfer the data directly from the user space buffers out to VME. + */ +static ssize_t resource_from_user(unsigned int minor, const char *buf, + size_t count, loff_t *ppos) +{ + ssize_t retval; + ssize_t copied = 0; + + if (count <= image[minor].size_buf) { + retval = __copy_from_user(image[minor].kern_buf, buf, + (unsigned long)count); + if (retval != 0) + copied = (copied - retval); + else + copied = count; + + copied = vme_master_write(image[minor].resource, + image[minor].kern_buf, copied, *ppos); + } else { + /* XXX Need to write this */ + printk("Currently don't support large transfers\n"); + /* Map in pages from userspace */ + + /* Call vme_master_write to do the transfer */ + return -EINVAL; + } + + return copied; +} + +static ssize_t buffer_to_user(unsigned int minor, char __user *buf, + size_t count, loff_t *ppos) +{ + void __iomem *image_ptr; + ssize_t retval; + + image_ptr = image[minor].kern_buf + *ppos; + + retval = __copy_to_user(buf, image_ptr, (unsigned long)count); + if (retval != 0) { + retval = (count - retval); + printk(KERN_WARNING "Partial copy to userspace\n"); + } else + retval = count; + + /* Return number of bytes successfully read */ + return retval; +} + +static ssize_t buffer_from_user(unsigned int minor, const char *buf, + size_t count, loff_t *ppos) +{ + void __iomem *image_ptr; + size_t retval; + + image_ptr = image[minor].kern_buf + *ppos; + + retval = __copy_from_user(image_ptr, buf, (unsigned long)count); + if (retval != 0) { + retval = (count - retval); + printk(KERN_WARNING "Partial copy to userspace\n"); + } else + retval = count; + + /* Return number of bytes successfully read */ + return retval; +} + +static ssize_t vme_user_read(struct file *file, char *buf, size_t count, + loff_t * ppos) +{ + unsigned int minor = MINOR(file->f_dentry->d_inode->i_rdev); + ssize_t retval; + size_t image_size; + size_t okcount; + + down(&image[minor].sem); + + /* XXX Do we *really* want this helper - we can use vme_*_get ? */ + image_size = vme_get_size(image[minor].resource); + + /* Ensure we are starting at a valid location */ + if ((*ppos < 0) || (*ppos > (image_size - 1))) { + up(&image[minor].sem); + return 0; + } + + /* Ensure not reading past end of the image */ + if (*ppos + count > image_size) + okcount = image_size - *ppos; + else + okcount = count; + + switch (type[minor]){ + case MASTER_MINOR: + retval = resource_to_user(minor, buf, okcount, ppos); + break; + case SLAVE_MINOR: + retval = buffer_to_user(minor, buf, okcount, ppos); + break; + default: + retval = -EINVAL; + } + + up(&image[minor].sem); + + if (retval > 0) + *ppos += retval; + + return retval; +} + +static ssize_t vme_user_write(struct file *file, const char *buf, size_t count, + loff_t *ppos) +{ + unsigned int minor = MINOR(file->f_dentry->d_inode->i_rdev); + ssize_t retval; + size_t image_size; + size_t okcount; + + down(&image[minor].sem); + + image_size = vme_get_size(image[minor].resource); + + /* Ensure we are starting at a valid location */ + if ((*ppos < 0) || (*ppos > (image_size - 1))) { + up(&image[minor].sem); + return 0; + } + + /* Ensure not reading past end of the image */ + if (*ppos + count > image_size) + okcount = image_size - *ppos; + else + okcount = count; + + switch (type[minor]){ + case MASTER_MINOR: + retval = resource_from_user(minor, buf, okcount, ppos); + break; + case SLAVE_MINOR: + retval = buffer_from_user(minor, buf, okcount, ppos); + break; + default: + retval = -EINVAL; + } + + up(&image[minor].sem); + + if (retval > 0) + *ppos += retval; + + return retval; +} + +static loff_t vme_user_llseek(struct file *file, loff_t off, int whence) +{ + printk(KERN_ERR "Llseek currently incomplete\n"); + return -EINVAL; +} + +/* + * The ioctls provided by the old VME access method (the one at vmelinux.org) + * are most certainly wrong as the effectively push the registers layout + * through to user space. Given that the VME core can handle multiple bridges, + * with different register layouts this is most certainly not the way to go. + * + * We aren't using the structures defined in the Motorola driver either - these + * are also quite low level, however we should use the definitions that have + * already been defined. + */ +static int vme_user_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct vme_master master; + struct vme_slave slave; + unsigned long copied; + unsigned int minor = MINOR(inode->i_rdev); + int retval; + dma_addr_t pci_addr; + + statistics.ioctls++; + + switch (type[minor]) { + case CONTROL_MINOR: + break; + case MASTER_MINOR: + switch (cmd) { + case VME_GET_MASTER: + memset(&master, 0, sizeof(struct vme_master)); + + /* XXX We do not want to push aspace, cycle and width + * to userspace as they are + */ + retval = vme_master_get(image[minor].resource, + &(master.enable), &(master.vme_addr), + &(master.size), &(master.aspace), + &(master.cycle), &(master.dwidth)); + + copied = copy_to_user((char *)arg, &master, + sizeof(struct vme_master)); + if (copied != 0) { + printk(KERN_WARNING "Partial copy to " + "userspace\n"); + return -EFAULT; + } + + return retval; + break; + + case VME_SET_MASTER: + + copied = copy_from_user(&master, (char *)arg, + sizeof(master)); + if (copied != 0) { + printk(KERN_WARNING "Partial copy from " + "userspace\n"); + return -EFAULT; + } + + /* XXX We do not want to push aspace, cycle and width + * to userspace as they are + */ + return vme_master_set(image[minor].resource, + master.enable, master.vme_addr, master.size, + master.aspace, master.cycle, master.dwidth); + + break; + } + break; + case SLAVE_MINOR: + switch (cmd) { + case VME_GET_SLAVE: + memset(&slave, 0, sizeof(struct vme_slave)); + + /* XXX We do not want to push aspace, cycle and width + * to userspace as they are + */ + retval = vme_slave_get(image[minor].resource, + &(slave.enable), &(slave.vme_addr), + &(slave.size), &pci_addr, &(slave.aspace), + &(slave.cycle)); + + copied = copy_to_user((char *)arg, &slave, + sizeof(struct vme_slave)); + if (copied != 0) { + printk(KERN_WARNING "Partial copy to " + "userspace\n"); + return -EFAULT; + } + + return retval; + break; + + case VME_SET_SLAVE: + + copied = copy_from_user(&slave, (char *)arg, + sizeof(slave)); + if (copied != 0) { + printk(KERN_WARNING "Partial copy from " + "userspace\n"); + return -EFAULT; + } + + /* XXX We do not want to push aspace, cycle and width + * to userspace as they are + */ + return vme_slave_set(image[minor].resource, + slave.enable, slave.vme_addr, slave.size, + image[minor].pci_buf, slave.aspace, + slave.cycle); + + break; + } + break; + } + + return -EINVAL; +} + + +/* + * Unallocate a previously allocated buffer + */ +static void buf_unalloc (int num) +{ + if (image[num].kern_buf) { +#ifdef VME_DEBUG + printk(KERN_DEBUG "UniverseII:Releasing buffer at %p\n", + image[num].pci_buf); +#endif + + vme_free_consistent(image[num].resource, image[num].size_buf, + image[num].kern_buf, image[num].pci_buf); + + image[num].kern_buf = NULL; + image[num].pci_buf = 0; + image[num].size_buf = 0; + +#ifdef VME_DEBUG + } else { + printk(KERN_DEBUG "UniverseII: Buffer not allocated\n"); +#endif + } +} + +static struct vme_driver vme_user_driver = { + .name = driver_name, + .probe = vme_user_probe, + .remove = vme_user_remove, +}; + + +static int __init vme_user_init(void) +{ + int retval = 0; + int i; + struct vme_device_id *ids; + + printk(KERN_INFO "VME User Space Access Driver\n"); + + if (bus_num == 0) { + printk(KERN_ERR "%s: No cards, skipping registration\n", + driver_name); + goto err_nocard; + } + + /* Let's start by supporting one bus, we can support more than one + * in future revisions if that ever becomes necessary. + */ + if (bus_num > USER_BUS_MAX) { + printk(KERN_ERR "%s: Driver only able to handle %d PIO2 " + "Cards\n", driver_name, USER_BUS_MAX); + bus_num = USER_BUS_MAX; + } + + + /* Dynamically create the bind table based on module parameters */ + ids = kmalloc(sizeof(struct vme_device_id) * (bus_num + 1), GFP_KERNEL); + if (ids == NULL) { + printk(KERN_ERR "%s: Unable to allocate ID table\n", + driver_name); + goto err_id; + } + + memset(ids, 0, (sizeof(struct vme_device_id) * (bus_num + 1))); + + for (i = 0; i < bus_num; i++) { + ids[i].bus = bus[i]; + /* + * We register the driver against the slot occupied by *this* + * card, since it's really a low level way of controlling + * the VME bridge + */ + ids[i].slot = VME_SLOT_CURRENT; + } + + vme_user_driver.bind_table = ids; + + retval = vme_register_driver(&vme_user_driver); + if (retval != 0) + goto err_reg; + + return retval; + + vme_unregister_driver(&vme_user_driver); +err_reg: + kfree(ids); +err_id: +err_nocard: + return retval; +} + +/* + * In this simple access driver, the old behaviour is being preserved as much + * as practical. We will therefore reserve the buffers and request the images + * here so that we don't have to do it later. + */ +static int __init vme_user_probe(struct device *dev, int cur_bus, int cur_slot) +{ + int i, err; + char name[8]; + + /* Save pointer to the bridge device */ + if (vme_user_bridge != NULL) { + printk(KERN_ERR "%s: Driver can only be loaded for 1 device\n", + driver_name); + err = -EINVAL; + goto err_dev; + } + vme_user_bridge = dev; + + /* Initialise descriptors */ + for (i = 0; i < VME_DEVS; i++) { + image[i].kern_buf = NULL; + image[i].pci_buf = 0; + init_MUTEX(&(image[i].sem)); + image[i].device = NULL; + image[i].resource = NULL; + image[i].users = 0; + } + + /* Initialise statistics counters */ + reset_counters(); + + /* Assign major and minor numbers for the driver */ + err = register_chrdev_region(MKDEV(VME_MAJOR, 0), VME_DEVS, + driver_name); + if (err) { + printk(KERN_WARNING "%s: Error getting Major Number %d for " + "driver.\n", driver_name, VME_MAJOR); + goto err_region; + } + + /* Register the driver as a char device */ + vme_user_cdev = cdev_alloc(); + vme_user_cdev->ops = &vme_user_fops; + vme_user_cdev->owner = THIS_MODULE; + err = cdev_add(vme_user_cdev, MKDEV(VME_MAJOR, 0), VME_DEVS); + if (err) { + printk(KERN_WARNING "%s: cdev_all failed\n", driver_name); + goto err_char; + } + + /* Request slave resources and allocate buffers (128kB wide) */ + for (i = SLAVE_MINOR; i < (SLAVE_MAX + 1); i++) { + /* XXX Need to properly request attributes */ + image[i].resource = vme_slave_request(vme_user_bridge, + VME_A16, VME_SCT); + if (image[i].resource == NULL) { + printk(KERN_WARNING "Unable to allocate slave " + "resource\n"); + goto err_slave; + } + image[i].size_buf = PCI_BUF_SIZE; + image[i].kern_buf = vme_alloc_consistent(image[i].resource, + image[i].size_buf, &(image[i].pci_buf)); + if (image[i].kern_buf == NULL) { + printk(KERN_WARNING "Unable to allocate memory for " + "buffer\n"); + image[i].pci_buf = 0; + vme_slave_free(image[i].resource); + err = -ENOMEM; + goto err_slave; + } + } + + /* + * Request master resources allocate page sized buffers for small + * reads and writes + */ + for (i = MASTER_MINOR; i < (MASTER_MAX + 1); i++) { + /* XXX Need to properly request attributes */ + image[i].resource = vme_master_request(vme_user_bridge, + VME_A32, VME_SCT, VME_D32); + if (image[i].resource == NULL) { + printk(KERN_WARNING "Unable to allocate master " + "resource\n"); + goto err_master; + } + } + + /* Create sysfs entries - on udev systems this creates the dev files */ + vme_user_sysfs_class = class_create(THIS_MODULE, driver_name); + if (IS_ERR(vme_user_sysfs_class)) { + printk(KERN_ERR "Error creating vme_user class.\n"); + err = PTR_ERR(vme_user_sysfs_class); + goto err_class; + } + + /* Add sysfs Entries */ + for (i=0; i<VME_DEVS; i++) { + switch (type[i]) { + case MASTER_MINOR: + sprintf(name,"bus/vme/m%%d"); + break; + case CONTROL_MINOR: + sprintf(name,"bus/vme/ctl"); + break; + case SLAVE_MINOR: + sprintf(name,"bus/vme/s%%d"); + break; + default: + err = -EINVAL; + goto err_sysfs; + break; + } + + image[i].device = + device_create(vme_user_sysfs_class, NULL, + MKDEV(VME_MAJOR, i), NULL, name, + (type[i] == SLAVE_MINOR)? i - (MASTER_MAX + 1) : i); + if (IS_ERR(image[i].device)) { + printk("%s: Error creating sysfs device\n", + driver_name); + err = PTR_ERR(image[i].device); + goto err_sysfs; + } + } + + return 0; + + /* Ensure counter set correcty to destroy all sysfs devices */ + i = VME_DEVS; +err_sysfs: + while (i > 0){ + i--; + device_destroy(vme_user_sysfs_class, MKDEV(VME_MAJOR, i)); + } + class_destroy(vme_user_sysfs_class); + + /* Ensure counter set correcty to unalloc all master windows */ + i = MASTER_MAX + 1; +err_master: + while (i > MASTER_MINOR) { + i--; + vme_master_free(image[i].resource); + } + + /* + * Ensure counter set correcty to unalloc all slave windows and buffers + */ + i = SLAVE_MAX + 1; +err_slave: + while (i > SLAVE_MINOR) { + i--; + vme_slave_free(image[i].resource); + buf_unalloc(i); + } +err_class: + cdev_del(vme_user_cdev); +err_char: + unregister_chrdev_region(MKDEV(VME_MAJOR, 0), VME_DEVS); +err_region: +err_dev: + return err; +} + +static int __exit vme_user_remove(struct device *dev, int cur_bus, int cur_slot) +{ + int i; + + /* Remove sysfs Entries */ + for(i=0; i<VME_DEVS; i++) { + device_destroy(vme_user_sysfs_class, MKDEV(VME_MAJOR, i)); + } + class_destroy(vme_user_sysfs_class); + + for (i = SLAVE_MINOR; i < (SLAVE_MAX + 1); i++) { + vme_slave_set(image[i].resource, 0, 0, 0, 0, VME_A32, 0); + vme_slave_free(image[i].resource); + buf_unalloc(i); + } + + /* Unregister device driver */ + cdev_del(vme_user_cdev); + + /* Unregiser the major and minor device numbers */ + unregister_chrdev_region(MKDEV(VME_MAJOR, 0), VME_DEVS); + + return 0; +} + +static void __exit vme_user_exit(void) +{ + vme_unregister_driver(&vme_user_driver); + + kfree(vme_user_driver.bind_table); +} + + +MODULE_PARM_DESC(bus, "Enumeration of VMEbus to which the driver is connected"); +module_param_array(bus, int, &bus_num, 0); + +MODULE_DESCRIPTION("VME User Space Access Driver"); +MODULE_AUTHOR("Martyn Welch <martyn.welch@gefanuc.com"); +MODULE_LICENSE("GPL"); + +module_init(vme_user_init); +module_exit(vme_user_exit); diff --git a/drivers/staging/vme/devices/vme_user.h b/drivers/staging/vme/devices/vme_user.h new file mode 100644 index 0000000..ede77d7 --- /dev/null +++ b/drivers/staging/vme/devices/vme_user.h @@ -0,0 +1,52 @@ +#ifndef _VME_USER_H_ +#define _VME_USER_H_ + +#define USER_BUS_MAX 1 + +/* + * VMEbus Master Window Configuration Structure + */ +struct vme_master { + int enable; /* State of Window */ + unsigned long long vme_addr; /* Starting Address on the VMEbus */ + unsigned long long size; /* Window Size */ + vme_address_t aspace; /* Address Space */ + vme_cycle_t cycle; /* Cycle properties */ + vme_width_t dwidth; /* Maximum Data Width */ +#if 0 + char prefetchEnable; /* Prefetch Read Enable State */ + int prefetchSize; /* Prefetch Read Size (Cache Lines) */ + char wrPostEnable; /* Write Post State */ +#endif +}; + + +/* + * IOCTL Commands and structures + */ + +/* Magic number for use in ioctls */ +#define VME_IOC_MAGIC 0xAE + + +/* VMEbus Slave Window Configuration Structure */ +struct vme_slave { + int enable; /* State of Window */ + unsigned long long vme_addr; /* Starting Address on the VMEbus */ + unsigned long long size; /* Window Size */ + vme_address_t aspace; /* Address Space */ + vme_cycle_t cycle; /* Cycle properties */ +#if 0 + char wrPostEnable; /* Write Post State */ + char rmwLock; /* Lock PCI during RMW Cycles */ + char data64BitCapable; /* non-VMEbus capable of 64-bit Data */ +#endif +}; + +#define VME_GET_SLAVE _IOR(VME_IOC_MAGIC, 1, struct vme_slave) +#define VME_SET_SLAVE _IOW(VME_IOC_MAGIC, 2, struct vme_slave) +#define VME_GET_MASTER _IOR(VME_IOC_MAGIC, 3, struct vme_master) +#define VME_SET_MASTER _IOW(VME_IOC_MAGIC, 4, struct vme_master) + +#endif /* _VME_USER_H_ */ + diff --git a/drivers/staging/vme/vme.c b/drivers/staging/vme/vme.c new file mode 100644 index 0000000..477a1ad --- /dev/null +++ b/drivers/staging/vme/vme.c @@ -0,0 +1,1497 @@ +/* + * VME Bridge Framework + * + * Author: Martyn Welch <martyn.welch@gefanuc.com> + * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * + * Based on work by Tom Armistead and Ajit Prem + * Copyright 2004 Motorola Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/mm.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/poll.h> +#include <linux/highmem.h> +#include <linux/interrupt.h> +#include <linux/pagemap.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/syscalls.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> + +#include "vme.h" +#include "vme_bridge.h" + +/* Bitmask and mutex to keep track of bridge numbers */ +static unsigned int vme_bus_numbers; +DEFINE_MUTEX(vme_bus_num_mtx); + +static void __exit vme_exit (void); +static int __init vme_init (void); + + +/* + * Find the bridge resource associated with a specific device resource + */ +static struct vme_bridge *dev_to_bridge(struct device *dev) +{ + return dev->platform_data; +} + +/* + * Find the bridge that the resource is associated with. + */ +static struct vme_bridge *find_bridge(struct vme_resource *resource) +{ + /* Get list to search */ + switch (resource->type) { + case VME_MASTER: + return list_entry(resource->entry, struct vme_master_resource, + list)->parent; + break; + case VME_SLAVE: + return list_entry(resource->entry, struct vme_slave_resource, + list)->parent; + break; + case VME_DMA: + return list_entry(resource->entry, struct vme_dma_resource, + list)->parent; + break; + case VME_LM: + return list_entry(resource->entry, struct vme_lm_resource, + list)->parent; + break; + default: + printk(KERN_ERR "Unknown resource type\n"); + return NULL; + break; + } +} + +/* + * Allocate a contiguous block of memory for use by the driver. This is used to + * create the buffers for the slave windows. + * + * XXX VME bridges could be available on buses other than PCI. At the momment + * this framework only supports PCI devices. + */ +void * vme_alloc_consistent(struct vme_resource *resource, size_t size, + dma_addr_t *dma) +{ + struct vme_bridge *bridge; + struct pci_dev *pdev; + + if(resource == NULL) { + printk("No resource\n"); + return NULL; + } + + bridge = find_bridge(resource); + if(bridge == NULL) { + printk("Can't find bridge\n"); + return NULL; + } + + /* Find pci_dev container of dev */ + if (bridge->parent == NULL) { + printk("Dev entry NULL\n"); + return NULL; + } + pdev = container_of(bridge->parent, struct pci_dev, dev); + + return pci_alloc_consistent(pdev, size, dma); +} +EXPORT_SYMBOL(vme_alloc_consistent); + +/* + * Free previously allocated contiguous block of memory. + * + * XXX VME bridges could be available on buses other than PCI. At the momment + * this framework only supports PCI devices. + */ +void vme_free_consistent(struct vme_resource *resource, size_t size, + void *vaddr, dma_addr_t dma) +{ + struct vme_bridge *bridge; + struct pci_dev *pdev; + + if(resource == NULL) { + printk("No resource\n"); + return; + } + + bridge = find_bridge(resource); + if(bridge == NULL) { + printk("Can't find bridge\n"); + return; + } + + /* Find pci_dev container of dev */ + pdev = container_of(bridge->parent, struct pci_dev, dev); + + pci_free_consistent(pdev, size, vaddr, dma); +} +EXPORT_SYMBOL(vme_free_consistent); + +size_t vme_get_size(struct vme_resource *resource) +{ + int enabled, retval; + unsigned long long base, size; + dma_addr_t buf_base; + vme_address_t aspace; + vme_cycle_t cycle; + vme_width_t dwidth; + + switch (resource->type) { + case VME_MASTER: + retval = vme_master_get(resource, &enabled, &base, &size, + &aspace, &cycle, &dwidth); + + return size; + break; + case VME_SLAVE: + retval = vme_slave_get(resource, &enabled, &base, &size, + &buf_base, &aspace, &cycle); + + return size; + break; + case VME_DMA: + return 0; + break; + default: + printk(KERN_ERR "Unknown resource type\n"); + return 0; + break; + } +} +EXPORT_SYMBOL(vme_get_size); + +static int vme_check_window(vme_address_t aspace, unsigned long long vme_base, + unsigned long long size) +{ + int retval = 0; + + switch (aspace) { + case VME_A16: + if (((vme_base + size) > VME_A16_MAX) || + (vme_base > VME_A16_MAX)) + retval = -EFAULT; + break; + case VME_A24: + if (((vme_base + size) > VME_A24_MAX) || + (vme_base > VME_A24_MAX)) + retval = -EFAULT; + break; + case VME_A32: + if (((vme_base + size) > VME_A32_MAX) || + (vme_base > VME_A32_MAX)) + retval = -EFAULT; + break; + case VME_A64: + /* + * Any value held in an unsigned long long can be used as the + * base + */ + break; + case VME_CRCSR: + if (((vme_base + size) > VME_CRCSR_MAX) || + (vme_base > VME_CRCSR_MAX)) + retval = -EFAULT; + break; + case VME_USER1: + case VME_USER2: + case VME_USER3: + case VME_USER4: + /* User Defined */ + break; + default: + printk("Invalid address space\n"); + retval = -EINVAL; + break; + } + + return retval; +} + +/* + * Request a slave image with specific attributes, return some unique + * identifier. + */ +struct vme_resource * vme_slave_request(struct device *dev, + vme_address_t address, vme_cycle_t cycle) +{ + struct vme_bridge *bridge; + struct list_head *slave_pos = NULL; + struct vme_slave_resource *allocated_image = NULL; + struct vme_slave_resource *slave_image = NULL; + struct vme_resource *resource = NULL; + + bridge = dev_to_bridge(dev); + if (bridge == NULL) { + printk(KERN_ERR "Can't find VME bus\n"); + goto err_bus; + } + + /* Loop through slave resources */ + list_for_each(slave_pos, &(bridge->slave_resources)) { + slave_image = list_entry(slave_pos, + struct vme_slave_resource, list); + + if (slave_image == NULL) { + printk("Registered NULL Slave resource\n"); + continue; + } + + /* Find an unlocked and compatible image */ + mutex_lock(&(slave_image->mtx)); + if(((slave_image->address_attr & address) == address) && + ((slave_image->cycle_attr & cycle) == cycle) && + (slave_image->locked == 0)) { + + slave_image->locked = 1; + mutex_unlock(&(slave_image->mtx)); + allocated_image = slave_image; + break; + } + mutex_unlock(&(slave_image->mtx)); + } + + /* No free image */ + if (allocated_image == NULL) + goto err_image; + + resource = kmalloc(sizeof(struct vme_resource), GFP_KERNEL); + if (resource == NULL) { + printk(KERN_WARNING "Unable to allocate resource structure\n"); + goto err_alloc; + } + resource->type = VME_SLAVE; + resource->entry = &(allocated_image->list); + + return resource; + +err_alloc: + /* Unlock image */ + mutex_lock(&(slave_image->mtx)); + slave_image->locked = 0; + mutex_unlock(&(slave_image->mtx)); +err_image: +err_bus: + return NULL; +} +EXPORT_SYMBOL(vme_slave_request); + +int vme_slave_set (struct vme_resource *resource, int enabled, + unsigned long long vme_base, unsigned long long size, + dma_addr_t buf_base, vme_address_t aspace, vme_cycle_t cycle) +{ + struct vme_bridge *bridge = find_bridge(resource); + struct vme_slave_resource *image; + int retval; + + if (resource->type != VME_SLAVE) { + printk("Not a slave resource\n"); + return -EINVAL; + } + + image = list_entry(resource->entry, struct vme_slave_resource, list); + + if (bridge->slave_set == NULL) { + printk("Function not supported\n"); + return -ENOSYS; + } + + if(!(((image->address_attr & aspace) == aspace) && + ((image->cycle_attr & cycle) == cycle))) { + printk("Invalid attributes\n"); + return -EINVAL; + } + + retval = vme_check_window(aspace, vme_base, size); + if(retval) + return retval; + + return bridge->slave_set(image, enabled, vme_base, size, buf_base, + aspace, cycle); +} +EXPORT_SYMBOL(vme_slave_set); + +int vme_slave_get (struct vme_resource *resource, int *enabled, + unsigned long long *vme_base, unsigned long long *size, + dma_addr_t *buf_base, vme_address_t *aspace, vme_cycle_t *cycle) +{ + struct vme_bridge *bridge = find_bridge(resource); + struct vme_slave_resource *image; + + if (resource->type != VME_SLAVE) { + printk("Not a slave resource\n"); + return -EINVAL; + } + + image = list_entry(resource->entry, struct vme_slave_resource, list); + + if (bridge->slave_get == NULL) { + printk("vme_slave_get not supported\n"); + return -EINVAL; + } + + return bridge->slave_get(image, enabled, vme_base, size, buf_base, + aspace, cycle); +} +EXPORT_SYMBOL(vme_slave_get); + +void vme_slave_free(struct vme_resource *resource) +{ + struct vme_slave_resource *slave_image; + + if (resource->type != VME_SLAVE) { + printk("Not a slave resource\n"); + return; + } + + slave_image = list_entry(resource->entry, struct vme_slave_resource, + list); + if (slave_image == NULL) { + printk("Can't find slave resource\n"); + return; + } + + /* Unlock image */ + mutex_lock(&(slave_image->mtx)); + if (slave_image->locked == 0) + printk(KERN_ERR "Image is already free\n"); + + slave_image->locked = 0; + mutex_unlock(&(slave_image->mtx)); + + /* Free up resource memory */ + kfree(resource); +} +EXPORT_SYMBOL(vme_slave_free); + +/* + * Request a master image with specific attributes, return some unique + * identifier. + */ +struct vme_resource * vme_master_request(struct device *dev, + vme_address_t address, vme_cycle_t cycle, vme_width_t dwidth) +{ + struct vme_bridge *bridge; + struct list_head *master_pos = NULL; + struct vme_master_resource *allocated_image = NULL; + struct vme_master_resource *master_image = NULL; + struct vme_resource *resource = NULL; + + bridge = dev_to_bridge(dev); + if (bridge == NULL) { + printk(KERN_ERR "Can't find VME bus\n"); + goto err_bus; + } + + /* Loop through master resources */ + list_for_each(master_pos, &(bridge->master_resources)) { + master_image = list_entry(master_pos, + struct vme_master_resource, list); + + if (master_image == NULL) { + printk(KERN_WARNING "Registered NULL master resource\n"); + continue; + } + + /* Find an unlocked and compatible image */ + spin_lock(&(master_image->lock)); + if(((master_image->address_attr & address) == address) && + ((master_image->cycle_attr & cycle) == cycle) && + ((master_image->width_attr & dwidth) == dwidth) && + (master_image->locked == 0)) { + + master_image->locked = 1; + spin_unlock(&(master_image->lock)); + allocated_image = master_image; + break; + } + spin_unlock(&(master_image->lock)); + } + + /* Check to see if we found a resource */ + if (allocated_image == NULL) { + printk(KERN_ERR "Can't find a suitable resource\n"); + goto err_image; + } + + resource = kmalloc(sizeof(struct vme_resource), GFP_KERNEL); + if (resource == NULL) { + printk(KERN_ERR "Unable to allocate resource structure\n"); + goto err_alloc; + } + resource->type = VME_MASTER; + resource->entry = &(allocated_image->list); + + return resource; + + kfree(resource); +err_alloc: + /* Unlock image */ + spin_lock(&(master_image->lock)); + master_image->locked = 0; + spin_unlock(&(master_image->lock)); +err_image: +err_bus: + return NULL; +} +EXPORT_SYMBOL(vme_master_request); + +int vme_master_set (struct vme_resource *resource, int enabled, + unsigned long long vme_base, unsigned long long size, + vme_address_t aspace, vme_cycle_t cycle, vme_width_t dwidth) +{ + struct vme_bridge *bridge = find_bridge(resource); + struct vme_master_resource *image; + int retval; + + if (resource->type != VME_MASTER) { + printk("Not a master resource\n"); + return -EINVAL; + } + + image = list_entry(resource->entry, struct vme_master_resource, list); + + if (bridge->master_set == NULL) { + printk("vme_master_set not supported\n"); + return -EINVAL; + } + + if(!(((image->address_attr & aspace) == aspace) && + ((image->cycle_attr & cycle) == cycle) && + ((image->width_attr & dwidth) == dwidth))) { + printk("Invalid attributes\n"); + return -EINVAL; + } + + retval = vme_check_window(aspace, vme_base, size); + if(retval) + return retval; + + return bridge->master_set(image, enabled, vme_base, size, aspace, + cycle, dwidth); +} +EXPORT_SYMBOL(vme_master_set); + +int vme_master_get (struct vme_resource *resource, int *enabled, + unsigned long long *vme_base, unsigned long long *size, + vme_address_t *aspace, vme_cycle_t *cycle, vme_width_t *dwidth) +{ + struct vme_bridge *bridge = find_bridge(resource); + struct vme_master_resource *image; + + if (resource->type != VME_MASTER) { + printk("Not a master resource\n"); + return -EINVAL; + } + + image = list_entry(resource->entry, struct vme_master_resource, list); + + if (bridge->master_get == NULL) { + printk("vme_master_set not supported\n"); + return -EINVAL; + } + + return bridge->master_get(image, enabled, vme_base, size, aspace, + cycle, dwidth); +} +EXPORT_SYMBOL(vme_master_get); + +/* + * Read data out of VME space into a buffer. + */ +ssize_t vme_master_read (struct vme_resource *resource, void *buf, size_t count, + loff_t offset) +{ + struct vme_bridge *bridge = find_bridge(resource); + struct vme_master_resource *image; + size_t length; + + if (bridge->master_read == NULL) { + printk("Reading from resource not supported\n"); + return -EINVAL; + } + + if (resource->type != VME_MASTER) { + printk("Not a master resource\n"); + return -EINVAL; + } + + image = list_entry(resource->entry, struct vme_master_resource, list); + + length = vme_get_size(resource); + + if (offset > length) { + printk("Invalid Offset\n"); + return -EFAULT; + } + + if ((offset + count) > length) + count = length - offset; + + return bridge->master_read(image, buf, count, offset); + +} +EXPORT_SYMBOL(vme_master_read); + +/* + * Write data out to VME space from a buffer. + */ +ssize_t vme_master_write (struct vme_resource *resource, void *buf, + size_t count, loff_t offset) +{ + struct vme_bridge *bridge = find_bridge(resource); + struct vme_master_resource *image; + size_t length; + + if (bridge->master_write == NULL) { + printk("Writing to resource not supported\n"); + return -EINVAL; + } + + if (resource->type != VME_MASTER) { + printk("Not a master resource\n"); + return -EINVAL; + } + + image = list_entry(resource->entry, struct vme_master_resource, list); + + length = vme_get_size(resource); + + if (offset > length) { + printk("Invalid Offset\n"); + return -EFAULT; + } + + if ((offset + count) > length) + count = length - offset; + + return bridge->master_write(image, buf, count, offset); +} +EXPORT_SYMBOL(vme_master_write); + +/* + * Perform RMW cycle to provided location. + */ +unsigned int vme_master_rmw (struct vme_resource *resource, unsigned int mask, + unsigned int compare, unsigned int swap, loff_t offset) +{ + struct vme_bridge *bridge = find_bridge(resource); + struct vme_master_resource *image; + + if (bridge->master_rmw == NULL) { + printk("Writing to resource not supported\n"); + return -EINVAL; + } + + if (resource->type != VME_MASTER) { + printk("Not a master resource\n"); + return -EINVAL; + } + + image = list_entry(resource->entry, struct vme_master_resource, list); + + return bridge->master_rmw(image, mask, compare, swap, offset); +} +EXPORT_SYMBOL(vme_master_rmw); + +void vme_master_free(struct vme_resource *resource) +{ + struct vme_master_resource *master_image; + + if (resource->type != VME_MASTER) { + printk("Not a master resource\n"); + return; + } + + master_image = list_entry(resource->entry, struct vme_master_resource, + list); + if (master_image == NULL) { + printk("Can't find master resource\n"); + return; + } + + /* Unlock image */ + spin_lock(&(master_image->lock)); + if (master_image->locked == 0) + printk(KERN_ERR "Image is already free\n"); + + master_image->locked = 0; + spin_unlock(&(master_image->lock)); + + /* Free up resource memory */ + kfree(resource); +} +EXPORT_SYMBOL(vme_master_free); + +/* + * Request a DMA controller with specific attributes, return some unique + * identifier. + */ +struct vme_resource *vme_request_dma(struct device *dev) +{ + struct vme_bridge *bridge; + struct list_head *dma_pos = NULL; + struct vme_dma_resource *allocated_ctrlr = NULL; + struct vme_dma_resource *dma_ctrlr = NULL; + struct vme_resource *resource = NULL; + + /* XXX Not checking resource attributes */ + printk(KERN_ERR "No VME resource Attribute tests done\n"); + + bridge = dev_to_bridge(dev); + if (bridge == NULL) { + printk(KERN_ERR "Can't find VME bus\n"); + goto err_bus; + } + + /* Loop through DMA resources */ + list_for_each(dma_pos, &(bridge->dma_resources)) { + dma_ctrlr = list_entry(dma_pos, + struct vme_dma_resource, list); + + if (dma_ctrlr == NULL) { + printk("Registered NULL DMA resource\n"); + continue; + } + + /* Find an unlocked controller */ + mutex_lock(&(dma_ctrlr->mtx)); + if(dma_ctrlr->locked == 0) { + dma_ctrlr->locked = 1; + mutex_unlock(&(dma_ctrlr->mtx)); + allocated_ctrlr = dma_ctrlr; + break; + } + mutex_unlock(&(dma_ctrlr->mtx)); + } + + /* Check to see if we found a resource */ + if (allocated_ctrlr == NULL) + goto err_ctrlr; + + resource = kmalloc(sizeof(struct vme_resource), GFP_KERNEL); + if (resource == NULL) { + printk(KERN_WARNING "Unable to allocate resource structure\n"); + goto err_alloc; + } + resource->type = VME_DMA; + resource->entry = &(allocated_ctrlr->list); + + return resource; + +err_alloc: + /* Unlock image */ + mutex_lock(&(dma_ctrlr->mtx)); + dma_ctrlr->locked = 0; + mutex_unlock(&(dma_ctrlr->mtx)); +err_ctrlr: +err_bus: + return NULL; +} +EXPORT_SYMBOL(vme_request_dma); + +/* + * Start new list + */ +struct vme_dma_list *vme_new_dma_list(struct vme_resource *resource) +{ + struct vme_dma_resource *ctrlr; + struct vme_dma_list *dma_list; + + if (resource->type != VME_DMA) { + printk("Not a DMA resource\n"); + return NULL; + } + + ctrlr = list_entry(resource->entry, struct vme_dma_resource, list); + + dma_list = (struct vme_dma_list *)kmalloc( + sizeof(struct vme_dma_list), GFP_KERNEL); + if(dma_list == NULL) { + printk("Unable to allocate memory for new dma list\n"); + return NULL; + } + INIT_LIST_HEAD(&(dma_list->entries)); + dma_list->parent = ctrlr; + mutex_init(&(dma_list->mtx)); + + return dma_list; +} +EXPORT_SYMBOL(vme_new_dma_list); + +/* + * Create "Pattern" type attributes + */ +struct vme_dma_attr *vme_dma_pattern_attribute(u32 pattern, + vme_pattern_t type) +{ + struct vme_dma_attr *attributes; + struct vme_dma_pattern *pattern_attr; + + attributes = (struct vme_dma_attr *)kmalloc( + sizeof(struct vme_dma_attr), GFP_KERNEL); + if(attributes == NULL) { + printk("Unable to allocate memory for attributes structure\n"); + goto err_attr; + } + + pattern_attr = (struct vme_dma_pattern *)kmalloc( + sizeof(struct vme_dma_pattern), GFP_KERNEL); + if(pattern_attr == NULL) { + printk("Unable to allocate memory for pattern attributes\n"); + goto err_pat; + } + + attributes->type = VME_DMA_PATTERN; + attributes->private = (void *)pattern_attr; + + pattern_attr->pattern = pattern; + pattern_attr->type = type; + + return attributes; + + kfree(pattern_attr); +err_pat: + kfree(attributes); +err_attr: + return NULL; +} +EXPORT_SYMBOL(vme_dma_pattern_attribute); + +/* + * Create "PCI" type attributes + */ +struct vme_dma_attr *vme_dma_pci_attribute(dma_addr_t address) +{ + struct vme_dma_attr *attributes; + struct vme_dma_pci *pci_attr; + + /* XXX Run some sanity checks here */ + + attributes = (struct vme_dma_attr *)kmalloc( + sizeof(struct vme_dma_attr), GFP_KERNEL); + if(attributes == NULL) { + printk("Unable to allocate memory for attributes structure\n"); + goto err_attr; + } + + pci_attr = (struct vme_dma_pci *)kmalloc(sizeof(struct vme_dma_pci), + GFP_KERNEL); + if(pci_attr == NULL) { + printk("Unable to allocate memory for pci attributes\n"); + goto err_pci; + } + + + + attributes->type = VME_DMA_PCI; + attributes->private = (void *)pci_attr; + + pci_attr->address = address; + + return attributes; + + kfree(pci_attr); +err_pci: + kfree(attributes); +err_attr: + return NULL; +} +EXPORT_SYMBOL(vme_dma_pci_attribute); + +/* + * Create "VME" type attributes + */ +struct vme_dma_attr *vme_dma_vme_attribute(unsigned long long address, + vme_address_t aspace, vme_cycle_t cycle, vme_width_t dwidth) +{ + struct vme_dma_attr *attributes; + struct vme_dma_vme *vme_attr; + + /* XXX Run some sanity checks here */ + + attributes = (struct vme_dma_attr *)kmalloc( + sizeof(struct vme_dma_attr), GFP_KERNEL); + if(attributes == NULL) { + printk("Unable to allocate memory for attributes structure\n"); + goto err_attr; + } + + vme_attr = (struct vme_dma_vme *)kmalloc(sizeof(struct vme_dma_vme), + GFP_KERNEL); + if(vme_attr == NULL) { + printk("Unable to allocate memory for vme attributes\n"); + goto err_vme; + } + + attributes->type = VME_DMA_VME; + attributes->private = (void *)vme_attr; + + vme_attr->address = address; + vme_attr->aspace = aspace; + vme_attr->cycle = cycle; + vme_attr->dwidth = dwidth; + + return attributes; + + kfree(vme_attr); +err_vme: + kfree(attributes); +err_attr: + return NULL; +} +EXPORT_SYMBOL(vme_dma_vme_attribute); + +/* + * Free attribute + */ +void vme_dma_free_attribute(struct vme_dma_attr *attributes) +{ + kfree(attributes->private); + kfree(attributes); +} +EXPORT_SYMBOL(vme_dma_free_attribute); + +int vme_dma_list_add(struct vme_dma_list *list, struct vme_dma_attr *src, + struct vme_dma_attr *dest, size_t count) +{ + struct vme_bridge *bridge = list->parent->parent; + int retval; + + if (bridge->dma_list_add == NULL) { + printk("Link List DMA generation not supported\n"); + return -EINVAL; + } + + if (mutex_trylock(&(list->mtx))) { + printk("Link List already submitted\n"); + return -EINVAL; + } + + retval = bridge->dma_list_add(list, src, dest, count); + + mutex_unlock(&(list->mtx)); + + return retval; +} +EXPORT_SYMBOL(vme_dma_list_add); + +int vme_dma_list_exec(struct vme_dma_list *list) +{ + struct vme_bridge *bridge = list->parent->parent; + int retval; + + if (bridge->dma_list_exec == NULL) { + printk("Link List DMA execution not supported\n"); + return -EINVAL; + } + + mutex_lock(&(list->mtx)); + + retval = bridge->dma_list_exec(list); + + mutex_unlock(&(list->mtx)); + + return retval; +} +EXPORT_SYMBOL(vme_dma_list_exec); + +int vme_dma_list_free(struct vme_dma_list *list) +{ + struct vme_bridge *bridge = list->parent->parent; + int retval; + + if (bridge->dma_list_empty == NULL) { + printk("Emptying of Link Lists not supported\n"); + return -EINVAL; + } + + if (mutex_trylock(&(list->mtx))) { + printk("Link List in use\n"); + return -EINVAL; + } + + /* + * Empty out all of the entries from the dma list. We need to go to the + * low level driver as dma entries are driver specific. + */ + retval = bridge->dma_list_empty(list); + if (retval) { + printk("Unable to empty link-list entries\n"); + mutex_unlock(&(list->mtx)); + return retval; + } + mutex_unlock(&(list->mtx)); + kfree(list); + + return retval; +} +EXPORT_SYMBOL(vme_dma_list_free); + +int vme_dma_free(struct vme_resource *resource) +{ + struct vme_dma_resource *ctrlr; + + if (resource->type != VME_DMA) { + printk("Not a DMA resource\n"); + return -EINVAL; + } + + ctrlr = list_entry(resource->entry, struct vme_dma_resource, list); + + if (mutex_trylock(&(ctrlr->mtx))) { + printk("Resource busy, can't free\n"); + return -EBUSY; + } + + if (!(list_empty(&(ctrlr->pending)) && list_empty(&(ctrlr->running)))) { + printk("Resource still processing transfers\n"); + mutex_unlock(&(ctrlr->mtx)); + return -EBUSY; + } + + ctrlr->locked = 0; + + mutex_unlock(&(ctrlr->mtx)); + + return 0; +} +EXPORT_SYMBOL(vme_dma_free); + +int vme_request_irq(struct device *dev, int level, int statid, + void (*callback)(int level, int vector, void *priv_data), + void *priv_data) +{ + struct vme_bridge *bridge; + + bridge = dev_to_bridge(dev); + if (bridge == NULL) { + printk(KERN_ERR "Can't find VME bus\n"); + return -EINVAL; + } + + if((level < 1) || (level > 7)) { + printk(KERN_WARNING "Invalid interrupt level\n"); + return -EINVAL; + } + + if (bridge->request_irq == NULL) { + printk("Registering interrupts not supported\n"); + return -EINVAL; + } + + return bridge->request_irq(level, statid, callback, priv_data); +} +EXPORT_SYMBOL(vme_request_irq); + +void vme_free_irq(struct device *dev, int level, int statid) +{ + struct vme_bridge *bridge; + + bridge = dev_to_bridge(dev); + if (bridge == NULL) { + printk(KERN_ERR "Can't find VME bus\n"); + return; + } + + if((level < 1) || (level > 7)) { + printk(KERN_WARNING "Invalid interrupt level\n"); + return; + } + + if (bridge->free_irq == NULL) { + printk("Freeing interrupts not supported\n"); + return; + } + + bridge->free_irq(level, statid); +} +EXPORT_SYMBOL(vme_free_irq); + +int vme_generate_irq(struct device *dev, int level, int statid) +{ + struct vme_bridge *bridge; + + bridge = dev_to_bridge(dev); + if (bridge == NULL) { + printk(KERN_ERR "Can't find VME bus\n"); + return -EINVAL; + } + + if((level < 1) || (level > 7)) { + printk(KERN_WARNING "Invalid interrupt level\n"); + return -EINVAL; + } + + if (bridge->generate_irq == NULL) { + printk("Interrupt generation not supported\n"); + return -EINVAL; + } + + return bridge->generate_irq(level, statid); +} +EXPORT_SYMBOL(vme_generate_irq); + +/* + * Request the location monitor, return resource or NULL + */ +struct vme_resource *vme_lm_request(struct device *dev) +{ + struct vme_bridge *bridge; + struct list_head *lm_pos = NULL; + struct vme_lm_resource *allocated_lm = NULL; + struct vme_lm_resource *lm = NULL; + struct vme_resource *resource = NULL; + + bridge = dev_to_bridge(dev); + if (bridge == NULL) { + printk(KERN_ERR "Can't find VME bus\n"); + goto err_bus; + } + + /* Loop through DMA resources */ + list_for_each(lm_pos, &(bridge->lm_resources)) { + lm = list_entry(lm_pos, + struct vme_lm_resource, list); + + if (lm == NULL) { + printk(KERN_ERR "Registered NULL Location Monitor " + "resource\n"); + continue; + } + + /* Find an unlocked controller */ + mutex_lock(&(lm->mtx)); + if (lm->locked == 0) { + lm->locked = 1; + mutex_unlock(&(lm->mtx)); + allocated_lm = lm; + break; + } + mutex_unlock(&(lm->mtx)); + } + + /* Check to see if we found a resource */ + if (allocated_lm == NULL) + goto err_lm; + + resource = kmalloc(sizeof(struct vme_resource), GFP_KERNEL); + if (resource == NULL) { + printk(KERN_ERR "Unable to allocate resource structure\n"); + goto err_alloc; + } + resource->type = VME_LM; + resource->entry = &(allocated_lm->list); + + return resource; + +err_alloc: + /* Unlock image */ + mutex_lock(&(lm->mtx)); + lm->locked = 0; + mutex_unlock(&(lm->mtx)); +err_lm: +err_bus: + return NULL; +} +EXPORT_SYMBOL(vme_lm_request); + +int vme_lm_count(struct vme_resource *resource) +{ + struct vme_lm_resource *lm; + + if (resource->type != VME_LM) { + printk(KERN_ERR "Not a Location Monitor resource\n"); + return -EINVAL; + } + + lm = list_entry(resource->entry, struct vme_lm_resource, list); + + return lm->monitors; +} +EXPORT_SYMBOL(vme_lm_count); + +int vme_lm_set(struct vme_resource *resource, unsigned long long lm_base, + vme_address_t aspace, vme_cycle_t cycle) +{ + struct vme_bridge *bridge = find_bridge(resource); + struct vme_lm_resource *lm; + + if (resource->type != VME_LM) { + printk(KERN_ERR "Not a Location Monitor resource\n"); + return -EINVAL; + } + + lm = list_entry(resource->entry, struct vme_lm_resource, list); + + if (bridge->lm_set == NULL) { + printk(KERN_ERR "vme_lm_set not supported\n"); + return -EINVAL; + } + + /* XXX Check parameters */ + + return lm->parent->lm_set(lm, lm_base, aspace, cycle); +} +EXPORT_SYMBOL(vme_lm_set); + +int vme_lm_get(struct vme_resource *resource, unsigned long long *lm_base, + vme_address_t *aspace, vme_cycle_t *cycle) +{ + struct vme_bridge *bridge = find_bridge(resource); + struct vme_lm_resource *lm; + + if (resource->type != VME_LM) { + printk(KERN_ERR "Not a Location Monitor resource\n"); + return -EINVAL; + } + + lm = list_entry(resource->entry, struct vme_lm_resource, list); + + if (bridge->lm_get == NULL) { + printk(KERN_ERR "vme_lm_get not supported\n"); + return -EINVAL; + } + + return bridge->lm_get(lm, lm_base, aspace, cycle); +} +EXPORT_SYMBOL(vme_lm_get); + +int vme_lm_attach(struct vme_resource *resource, int monitor, + void (*callback)(int)) +{ + struct vme_bridge *bridge = find_bridge(resource); + struct vme_lm_resource *lm; + + if (resource->type != VME_LM) { + printk(KERN_ERR "Not a Location Monitor resource\n"); + return -EINVAL; + } + + lm = list_entry(resource->entry, struct vme_lm_resource, list); + + if (bridge->lm_attach == NULL) { + printk(KERN_ERR "vme_lm_attach not supported\n"); + return -EINVAL; + } + + return bridge->lm_attach(lm, monitor, callback); +} +EXPORT_SYMBOL(vme_lm_attach); + +int vme_lm_detach(struct vme_resource *resource, int monitor) +{ + struct vme_bridge *bridge = find_bridge(resource); + struct vme_lm_resource *lm; + + if (resource->type != VME_LM) { + printk(KERN_ERR "Not a Location Monitor resource\n"); + return -EINVAL; + } + + lm = list_entry(resource->entry, struct vme_lm_resource, list); + + if (bridge->lm_detach == NULL) { + printk(KERN_ERR "vme_lm_detach not supported\n"); + return -EINVAL; + } + + return bridge->lm_detach(lm, monitor); +} +EXPORT_SYMBOL(vme_lm_detach); + +void vme_lm_free(struct vme_resource *resource) +{ + struct vme_lm_resource *lm; + + if (resource->type != VME_LM) { + printk(KERN_ERR "Not a Location Monitor resource\n"); + return; + } + + lm = list_entry(resource->entry, struct vme_lm_resource, list); + + if (mutex_trylock(&(lm->mtx))) { + printk(KERN_ERR "Resource busy, can't free\n"); + return; + } + + /* XXX Check to see that there aren't any callbacks still attached */ + + lm->locked = 0; + + mutex_unlock(&(lm->mtx)); +} +EXPORT_SYMBOL(vme_lm_free); + +int vme_slot_get(struct device *bus) +{ + struct vme_bridge *bridge; + + bridge = dev_to_bridge(bus); + if (bridge == NULL) { + printk(KERN_ERR "Can't find VME bus\n"); + return -EINVAL; + } + + if (bridge->slot_get == NULL) { + printk("vme_slot_get not supported\n"); + return -EINVAL; + } + + return bridge->slot_get(); +} +EXPORT_SYMBOL(vme_slot_get); + + +/* - Bridge Registration --------------------------------------------------- */ + +static int vme_alloc_bus_num(void) +{ + int i; + + mutex_lock(&vme_bus_num_mtx); + for (i = 0; i < sizeof(vme_bus_numbers) * 8; i++) { + if (((vme_bus_numbers >> i) & 0x1) == 0) { + vme_bus_numbers |= (0x1 << i); + break; + } + } + mutex_unlock(&vme_bus_num_mtx); + + return i; +} + +static void vme_free_bus_num(int bus) +{ + mutex_lock(&vme_bus_num_mtx); + vme_bus_numbers |= ~(0x1 << bus); + mutex_unlock(&vme_bus_num_mtx); +} + +int vme_register_bridge (struct vme_bridge *bridge) +{ + struct device *dev; + int retval; + int i; + + bridge->num = vme_alloc_bus_num(); + + /* This creates 32 vme "slot" devices. This equates to a slot for each + * ID available in a system conforming to the ANSI/VITA 1-1994 + * specification. + */ + for (i = 0; i < VME_SLOTS_MAX; i++) { + dev = &(bridge->dev[i]); + memset(dev, 0, sizeof(struct device)); + + dev->parent = bridge->parent; + dev->bus = &(vme_bus_type); + /* + * We save a pointer to the bridge in platform_data so that we + * can get to it later. We keep driver_data for use by the + * driver that binds against the slot + */ + dev->platform_data = bridge; + dev_set_name(dev, "vme-%x.%x", bridge->num, i + 1); + + retval = device_register(dev); + if(retval) + goto err_reg; + } + + return retval; + + i = VME_SLOTS_MAX; +err_reg: + while (i > -1) { + dev = &(bridge->dev[i]); + device_unregister(dev); + } + vme_free_bus_num(bridge->num); + return retval; +} +EXPORT_SYMBOL(vme_register_bridge); + +void vme_unregister_bridge (struct vme_bridge *bridge) +{ + int i; + struct device *dev; + + + for (i = 0; i < VME_SLOTS_MAX; i++) { + dev = &(bridge->dev[i]); + device_unregister(dev); + } + vme_free_bus_num(bridge->num); +} +EXPORT_SYMBOL(vme_unregister_bridge); + + +/* - Driver Registration --------------------------------------------------- */ + +int vme_register_driver (struct vme_driver *drv) +{ + drv->driver.name = drv->name; + drv->driver.bus = &vme_bus_type; + + return driver_register(&drv->driver); +} +EXPORT_SYMBOL(vme_register_driver); + +void vme_unregister_driver (struct vme_driver *drv) +{ + driver_unregister(&drv->driver); +} +EXPORT_SYMBOL(vme_unregister_driver); + +/* - Bus Registration ------------------------------------------------------ */ + +int vme_calc_slot(struct device *dev) +{ + struct vme_bridge *bridge; + int num; + + bridge = dev_to_bridge(dev); + + /* Determine slot number */ + num = 0; + while(num < VME_SLOTS_MAX) { + if(&(bridge->dev[num]) == dev) { + break; + } + num++; + } + if (num == VME_SLOTS_MAX) { + dev_err(dev, "Failed to identify slot\n"); + num = 0; + goto err_dev; + } + num++; + +err_dev: + return num; +} + +static struct vme_driver *dev_to_vme_driver(struct device *dev) +{ + if(dev->driver == NULL) + printk("Bugger dev->driver is NULL\n"); + + return container_of(dev->driver, struct vme_driver, driver); +} + +static int vme_bus_match(struct device *dev, struct device_driver *drv) +{ + struct vme_bridge *bridge; + struct vme_driver *driver; + int i, num; + + bridge = dev_to_bridge(dev); + driver = container_of(drv, struct vme_driver, driver); + + num = vme_calc_slot(dev); + if (!num) + goto err_dev; + + if (driver->bind_table == NULL) { + dev_err(dev, "Bind table NULL\n"); + goto err_table; + } + + i = 0; + while((driver->bind_table[i].bus != 0) || + (driver->bind_table[i].slot != 0)) { + + if (bridge->num == driver->bind_table[i].bus) { + if (num == driver->bind_table[i].slot) + return 1; + + if (driver->bind_table[i].slot == VME_SLOT_ALL) + return 1; + + if ((driver->bind_table[i].slot == VME_SLOT_CURRENT) && + (num == vme_slot_get(dev))) + return 1; + } + i++; + } + +err_dev: +err_table: + return 0; +} + +static int vme_bus_probe(struct device *dev) +{ + struct vme_bridge *bridge; + struct vme_driver *driver; + int retval = -ENODEV; + + driver = dev_to_vme_driver(dev); + bridge = dev_to_bridge(dev); + + if(driver->probe != NULL) { + retval = driver->probe(dev, bridge->num, vme_calc_slot(dev)); + } + + return retval; +} + +static int vme_bus_remove(struct device *dev) +{ + struct vme_bridge *bridge; + struct vme_driver *driver; + int retval = -ENODEV; + + driver = dev_to_vme_driver(dev); + bridge = dev_to_bridge(dev); + + if(driver->remove != NULL) { + retval = driver->remove(dev, bridge->num, vme_calc_slot(dev)); + } + + return retval; +} + +struct bus_type vme_bus_type = { + .name = "vme", + .match = vme_bus_match, + .probe = vme_bus_probe, + .remove = vme_bus_remove, +}; +EXPORT_SYMBOL(vme_bus_type); + +static int __init vme_init (void) +{ + return bus_register(&vme_bus_type); +} + +static void __exit vme_exit (void) +{ + bus_unregister(&vme_bus_type); +} + +MODULE_DESCRIPTION("VME bridge driver framework"); +MODULE_AUTHOR("Martyn Welch <martyn.welch@gefanuc.com"); +MODULE_LICENSE("GPL"); + +module_init(vme_init); +module_exit(vme_exit); diff --git a/drivers/staging/vme/vme.h b/drivers/staging/vme/vme.h new file mode 100644 index 0000000..6206e91 --- /dev/null +++ b/drivers/staging/vme/vme.h @@ -0,0 +1,161 @@ +#ifndef _VME_H_ +#define _VME_H_ + +/* Resource Type */ +enum vme_resource_type { + VME_MASTER, + VME_SLAVE, + VME_DMA, + VME_LM +}; + +/* VME Address Spaces */ +typedef u32 vme_address_t; +#define VME_A16 0x1 +#define VME_A24 0x2 +#define VME_A32 0x4 +#define VME_A64 0x8 +#define VME_CRCSR 0x10 +#define VME_USER1 0x20 +#define VME_USER2 0x40 +#define VME_USER3 0x80 +#define VME_USER4 0x100 + +#define VME_A16_MAX 0x10000ULL +#define VME_A24_MAX 0x1000000ULL +#define VME_A32_MAX 0x100000000ULL +#define VME_A64_MAX 0x10000000000000000ULL +#define VME_CRCSR_MAX 0x1000000ULL + + +/* VME Cycle Types */ +typedef u32 vme_cycle_t; +#define VME_SCT 0x1 +#define VME_BLT 0x2 +#define VME_MBLT 0x4 +#define VME_2eVME 0x8 +#define VME_2eSST 0x10 +#define VME_2eSSTB 0x20 + +#define VME_2eSST160 0x100 +#define VME_2eSST267 0x200 +#define VME_2eSST320 0x400 + +#define VME_SUPER 0x1000 +#define VME_USER 0x2000 +#define VME_PROG 0x4000 +#define VME_DATA 0x8000 + +/* VME Data Widths */ +typedef u32 vme_width_t; +#define VME_D8 0x1 +#define VME_D16 0x2 +#define VME_D32 0x4 +#define VME_D64 0x8 + +/* Arbitration Scheduling Modes */ +typedef u32 vme_arbitration_t; +#define VME_R_ROBIN_MODE 0x1 +#define VME_PRIORITY_MODE 0x2 + +typedef u32 vme_dma_t; +#define VME_DMA_PATTERN (1<<0) +#define VME_DMA_PCI (1<<1) +#define VME_DMA_VME (1<<2) + +typedef u32 vme_pattern_t; +#define VME_DMA_PATTERN_BYTE (1<<0) +#define VME_DMA_PATTERN_WORD (1<<1) +#define VME_DMA_PATTERN_INCREMENT (1<<2) + +struct vme_dma_attr { + vme_dma_t type; + void *private; +}; + +struct vme_resource { + enum vme_resource_type type; + struct list_head *entry; +}; + +extern struct bus_type vme_bus_type; + +#define VME_SLOT_CURRENT -1 +#define VME_SLOT_ALL -2 + +struct vme_device_id { + int bus; + int slot; +}; + +struct vme_driver { + struct list_head node; + char *name; + const struct vme_device_id *bind_table; + int (*probe) (struct device *, int, int); + int (*remove) (struct device *, int, int); + void (*shutdown) (void); + struct device_driver driver; +}; + +void * vme_alloc_consistent(struct vme_resource *, size_t, dma_addr_t *); +void vme_free_consistent(struct vme_resource *, size_t, void *, + dma_addr_t); + +size_t vme_get_size(struct vme_resource *); + +struct vme_resource * vme_slave_request(struct device *, vme_address_t, vme_cycle_t); +int vme_slave_set (struct vme_resource *, int, unsigned long long, + unsigned long long, dma_addr_t, vme_address_t, vme_cycle_t); +int vme_slave_get (struct vme_resource *, int *, unsigned long long *, + unsigned long long *, dma_addr_t *, vme_address_t *, vme_cycle_t *); +void vme_slave_free(struct vme_resource *); + +struct vme_resource * vme_master_request(struct device *, vme_address_t, vme_cycle_t, + vme_width_t); +int vme_master_set (struct vme_resource *, int, unsigned long long, + unsigned long long, vme_address_t, vme_cycle_t, vme_width_t); +int vme_master_get (struct vme_resource *, int *, unsigned long long *, + unsigned long long *, vme_address_t *, vme_cycle_t *, vme_width_t *); +ssize_t vme_master_read(struct vme_resource *, void *, size_t, loff_t); +ssize_t vme_master_write(struct vme_resource *, void *, size_t, loff_t); +unsigned int vme_master_rmw (struct vme_resource *, unsigned int, unsigned int, + unsigned int, loff_t); +void vme_master_free(struct vme_resource *); + +struct vme_resource *vme_request_dma(struct device *); +struct vme_dma_list *vme_new_dma_list(struct vme_resource *); +struct vme_dma_attr *vme_dma_pattern_attribute(u32, vme_pattern_t); +struct vme_dma_attr *vme_dma_pci_attribute(dma_addr_t); +struct vme_dma_attr *vme_dma_vme_attribute(unsigned long long, vme_address_t, + vme_cycle_t, vme_width_t); +void vme_dma_free_attribute(struct vme_dma_attr *); +int vme_dma_list_add(struct vme_dma_list *, struct vme_dma_attr *, + struct vme_dma_attr *, size_t); +int vme_dma_list_exec(struct vme_dma_list *); +int vme_dma_list_free(struct vme_dma_list *); +int vme_dma_free(struct vme_resource *); + +int vme_request_irq(struct device *, int, int, + void (*callback)(int, int, void *), void *); +void vme_free_irq(struct device *, int, int); +int vme_generate_irq(struct device *, int, int); + +struct vme_resource * vme_lm_request(struct device *); +int vme_lm_count(struct vme_resource *); +int vme_lm_set(struct vme_resource *, unsigned long long, vme_address_t, + vme_cycle_t); +int vme_lm_get(struct vme_resource *, unsigned long long *, vme_address_t *, + vme_cycle_t *); +int vme_lm_attach(struct vme_resource *, int, void (*callback)(int)); +int vme_lm_detach(struct vme_resource *, int); +void vme_lm_free(struct vme_resource *); + +int vme_slot_get(struct device *); + +int vme_register_driver (struct vme_driver *); +void vme_unregister_driver (struct vme_driver *); + + +#endif /* _VME_H_ */ + diff --git a/drivers/staging/vme/vme_api.txt b/drivers/staging/vme/vme_api.txt new file mode 100644 index 0000000..591eba5 --- /dev/null +++ b/drivers/staging/vme/vme_api.txt @@ -0,0 +1,372 @@ + VME Device Driver API + ===================== + +Driver registration +=================== + +As with other subsystems within the Linux kernel, VME device drivers register +with the VME subsystem, typically called from the devices init routine. This is +achieved via a call to the follwoing function: + + int vme_register_driver (struct vme_driver *driver); + +If driver registration is successful this function returns zero, if an error +occurred a negative error code will be returned. + +A pointer to a structure of type 'vme_driver' must be provided to the +registration function. The structure is as follows: + + struct vme_driver { + struct list_head node; + char *name; + const struct vme_device_id *bind_table; + int (*probe) (struct device *, int, int); + int (*remove) (struct device *, int, int); + void (*shutdown) (void); + struct device_driver driver; + }; + +At the minimum, the '.name', '.probe' and '.bind_table' elements of this +structure should be correctly set. The '.name' element is a pointer to a string +holding the device driver's name. The '.probe' element should contain a pointer +to the probe routine. + +The arguments of the probe routine are as follows: + + probe(struct device *dev, int bus, int slot); + +The '.bind_table' is a pointer to an array of type 'vme_device_id': + + struct vme_device_id { + int bus; + int slot; + }; + +Each structure in this array should provide a bus and slot number where the core +should probe, using the driver's probe routine, for a device on the specified +VME bus. + +The VME subsystem supports a single VME driver per 'slot'. There are considered +to be 32 slots per bus, one for each slot-ID as defined in the ANSI/VITA 1-1994 +specification and are analogious to the physical slots on the VME backplane. + +A function is also provided to unregister the driver from the VME core and is +usually called from the device driver's exit routine: + + void vme_unregister_driver (struct vme_driver *driver); + + +Resource management +=================== + +Once a driver has registered with the VME core the provided probe routine will +be called for each of the bus/slot combination that becomes valid as VME buses +are themselves registered. The probe routine is passed a pointer to the devices +device structure. This pointer should be saved, it will be required for +requesting VME resources. + +The driver can request ownership of one or more master windows, slave windows +and/or dma channels. Rather than allowing the device driver to request a +specific window or DMA channel (which may be used by a different driver) this +driver allows a resource to be assigned based on the required attributes of the +driver in question: + + struct vme_resource * vme_master_request(struct device *dev, + vme_address_t aspace, vme_cycle_t cycle, vme_width_t width); + + struct vme_resource * vme_slave_request(struct device *dev, + vme_address_t aspace, vme_cycle_t cycle); + + struct vme_resource *vme_request_dma(struct device *dev); + +For slave windows these attributes are split into those of type 'vme_address_t' +and 'vme_cycle_t'. Master windows add a further set of attributes 'vme_cycle_t'. +These attributes are defined as bitmasks and as such any combination of the +attributes can be requested for a single window, the core will assign a window +that meets the requirements, returning a pointer of type vme_resource that +should be used to identify the allocated resource when it is used. If an +unallocated window fitting the requirements can not be found a NULL pointer will +be returned. + +Functions are also provided to free window allocations once they are no longer +required. These functions should be passed the pointer to the resource provided +during resource allocation: + + void vme_master_free(struct vme_resource *res); + + void vme_slave_free(struct vme_resource *res); + + void vme_dma_free(struct vme_resource *res); + + +Master windows +============== + +Master windows provide access from the local processor[s] out onto the VME bus. +The number of windows available and the available access modes is dependant on +the underlying chipset. A window must be configured before it can be used. + + +Master window configuration +--------------------------- + +Once a master window has been assigned the following functions can be used to +configure it and retrieve the current settings: + + int vme_master_set (struct vme_resource *res, int enabled, + unsigned long long base, unsigned long long size, + vme_address_t aspace, vme_cycle_t cycle, vme_width_t width); + + int vme_master_get (struct vme_resource *res, int *enabled, + unsigned long long *base, unsigned long long *size, + vme_address_t *aspace, vme_cycle_t *cycle, vme_width_t *width); + +The address spaces, transfer widths and cycle types are the same as described +under resource management, however some of the options are mutually exclusive. +For example, only one address space may be specified. + +These functions return 0 on success or an error code should the call fail. + + +Master window access +-------------------- + +The following functions can be used to read from and write to configured master +windows. These functions return the number of bytes copied: + + ssize_t vme_master_read(struct vme_resource *res, void *buf, + size_t count, loff_t offset); + + ssize_t vme_master_write(struct vme_resource *res, void *buf, + size_t count, loff_t offset); + +In addition to simple reads and writes, a function is provided to do a +read-modify-write transaction. This function returns the original value of the +VME bus location : + + unsigned int vme_master_rmw (struct vme_resource *res, + unsigned int mask, unsigned int compare, unsigned int swap, + loff_t offset); + +This functions by reading the offset, applying the mask. If the bits selected in +the mask match with the values of the corresponding bits in the compare field, +the value of swap is written the specified offset. + + +Slave windows +============= + +Slave windows provide devices on the VME bus access into mapped portions of the +local memory. The number of windows available and the access modes that can be +used is dependant on the underlying chipset. A window must be configured before +it can be used. + + +Slave window configuration +-------------------------- + +Once a slave window has been assigned the following functions can be used to +configure it and retrieve the current settings: + + int vme_slave_set (struct vme_resource *res, int enabled, + unsigned long long base, unsigned long long size, + dma_addr_t mem, vme_address_t aspace, vme_cycle_t cycle); + + int vme_slave_get (struct vme_resource *res, int *enabled, + unsigned long long *base, unsigned long long *size, + dma_addr_t *mem, vme_address_t *aspace, vme_cycle_t *cycle); + +The address spaces, transfer widths and cycle types are the same as described +under resource management, however some of the options are mutually exclusive. +For example, only one address space may be specified. + +These functions return 0 on success or an error code should the call fail. + + +Slave window buffer allocation +------------------------------ + +Functions are provided to allow the user to allocate and free a contiguous +buffers which will be accessible by the VME bridge. These functions do not have +to be used, other methods can be used to allocate a buffer, though care must be +taken to ensure that they are contiguous and accessible by the VME bridge: + + void * vme_alloc_consistent(struct vme_resource *res, size_t size, + dma_addr_t *mem); + + void vme_free_consistent(struct vme_resource *res, size_t size, + void *virt, dma_addr_t mem); + + +Slave window access +------------------- + +Slave windows map local memory onto the VME bus, the standard methods for +accessing memory should be used. + + +DMA channels +============ + +The VME DMA transfer provides the ability to run link-list DMA transfers. The +API introduces the concept of DMA lists. Each DMA list is a link-list which can +be passed to a DMA controller. Multiple lists can be created, extended, +executed, reused and destroyed. + + +List Management +--------------- + +The following functions are provided to create and destroy DMA lists. Execution +of a list will not automatically destroy the list, thus enabling a list to be +reused for repetitive tasks: + + struct vme_dma_list *vme_new_dma_list(struct vme_resource *res); + + int vme_dma_list_free(struct vme_dma_list *list); + + +List Population +--------------- + +An item can be added to a list using the following function ( the source and +destination attributes need to be created before calling this function, this is +covered under "Transfer Attributes"): + + int vme_dma_list_add(struct vme_dma_list *list, + struct vme_dma_attr *src, struct vme_dma_attr *dest, + size_t count); + + +Transfer Attributes +------------------- + +The attributes for the source and destination are handled separately from adding +an item to a list. This is due to the diverse attributes required for each type +of source and destination. There are functions to create attributes for PCI, VME +and pattern sources and destinations (where appropriate): + +Pattern source: + + struct vme_dma_attr *vme_dma_pattern_attribute(u32 pattern, + vme_pattern_t type); + +PCI source or destination: + + struct vme_dma_attr *vme_dma_pci_attribute(dma_addr_t mem); + +VME source or destination: + + struct vme_dma_attr *vme_dma_vme_attribute(unsigned long long base, + vme_address_t aspace, vme_cycle_t cycle, vme_width_t width); + +The following function should be used to free an attribute: + + void vme_dma_free_attribute(struct vme_dma_attr *attr); + + +List Execution +-------------- + +The following function queues a list for execution. The function will return +once the list has been executed: + + int vme_dma_list_exec(struct vme_dma_list *list); + + +Interrupts +========== + +The VME API provides functions to attach and detach callbacks to specific VME +level and status ID combinations and for the generation of VME interrupts with +specific VME level and status IDs. + + +Attaching Interrupt Handlers +---------------------------- + +The following functions can be used to attach and free a specific VME level and +status ID combination. Any given combination can only be assigned a single +callback function. A void pointer parameter is provided, the value of which is +passed to the callback function, the use of this pointer is user undefined: + + int vme_request_irq(struct device *dev, int level, int statid, + void (*callback)(int, int, void *), void *priv); + + void vme_free_irq(struct device *dev, int level, int statid); + +The callback parameters are as follows. Care must be taken in writing a callback +function, callback functions run in interrupt context: + + void callback(int level, int statid, void *priv); + + +Interrupt Generation +-------------------- + +The following function can be used to generate a VME interrupt at a given VME +level and VME status ID: + + int vme_generate_irq(struct device *dev, int level, int statid); + + +Location monitors +================= + +The VME API provides the following functionality to configure the location +monitor. + + +Location Monitor Management +--------------------------- + +The following functions are provided to request the use of a block of location +monitors and to free them after they are no longer required: + + struct vme_resource * vme_lm_request(struct device *dev); + + void vme_lm_free(struct vme_resource * res); + +Each block may provide a number of location monitors, monitoring adjacent +locations. The following function can be used to determine how many locations +are provided: + + int vme_lm_count(struct vme_resource * res); + + +Location Monitor Configuration +------------------------------ + +Once a bank of location monitors has been allocated, the following functions +are provided to configure the location and mode of the location monitor: + + int vme_lm_set(struct vme_resource *res, unsigned long long base, + vme_address_t aspace, vme_cycle_t cycle); + + int vme_lm_get(struct vme_resource *res, unsigned long long *base, + vme_address_t *aspace, vme_cycle_t *cycle); + + +Location Monitor Use +-------------------- + +The following functions allow a callback to be attached and detached from each +location monitor location. Each location monitor can monitor a number of +adjacent locations: + + int vme_lm_attach(struct vme_resource *res, int num, + void (*callback)(int)); + + int vme_lm_detach(struct vme_resource *res, int num); + +The callback function is declared as follows. + + void callback(int num); + + +Slot Detection +============== + +This function returns the slot ID of the provided bridge. + + int vme_slot_get(struct device *dev); diff --git a/drivers/staging/vme/vme_bridge.h b/drivers/staging/vme/vme_bridge.h new file mode 100644 index 0000000..e43cc19 --- /dev/null +++ b/drivers/staging/vme/vme_bridge.h @@ -0,0 +1,261 @@ +#ifndef _VME_BRIDGE_H_ +#define _VME_BRIDGE_H_ + +#define VME_CRCSR_BUF_SIZE (508*1024) +#define VME_SLOTS_MAX 32 +/* + * Resource structures + */ +struct vme_master_resource { + struct list_head list; + struct vme_bridge *parent; + /* + * We are likely to need to access the VME bus in interrupt context, so + * protect master routines with a spinlock rather than a mutex. + */ + spinlock_t lock; + int locked; + int number; + vme_address_t address_attr; + vme_cycle_t cycle_attr; + vme_width_t width_attr; + struct resource pci_resource; /* XXX Rename to be bus agnostic */ + void *kern_base; +}; + +struct vme_slave_resource { + struct list_head list; + struct vme_bridge *parent; + struct mutex mtx; + int locked; + int number; + vme_address_t address_attr; + vme_cycle_t cycle_attr; +}; + +struct vme_dma_pattern { + u32 pattern; + vme_pattern_t type; +}; + +struct vme_dma_pci { + dma_addr_t address; +}; + +struct vme_dma_vme { + unsigned long long address; + vme_address_t aspace; + vme_cycle_t cycle; + vme_width_t dwidth; +}; + +struct vme_dma_list { + struct list_head list; + struct vme_dma_resource *parent; + struct list_head entries; + struct mutex mtx; +}; + +struct vme_dma_resource { + struct list_head list; + struct vme_bridge *parent; + struct mutex mtx; + int locked; + int number; + struct list_head pending; + struct list_head running; +}; + +struct vme_lm_resource { + struct list_head list; + struct vme_bridge *parent; + struct mutex mtx; + int locked; + int number; + int monitors; +}; + +struct vme_bus_error { + struct list_head list; + unsigned long long address; + u32 attributes; +}; + +struct vme_callback { + void (*func)(int, int, void*); + void *priv_data; +}; + +struct vme_irq { + int count; + struct vme_callback callback[255]; +}; + +/* Allow 16 characters for name (including null character) */ +#define VMENAMSIZ 16 + +/* This structure stores all the information about one bridge + * The structure should be dynamically allocated by the driver and one instance + * of the structure should be present for each VME chip present in the system. + * + * Currently we assume that all chips are PCI-based + */ +struct vme_bridge { + char name[VMENAMSIZ]; + int num; + struct list_head master_resources; + struct list_head slave_resources; + struct list_head dma_resources; + struct list_head lm_resources; + + struct list_head vme_errors; /* List for errors generated on VME */ + + /* Bridge Info - XXX Move to private structure? */ + struct device *parent; /* Generic device struct (pdev->dev for PCI) */ + void * base; /* Base Address of device registers */ + + struct device dev[VME_SLOTS_MAX]; /* Device registered with + * device model on VME bus + */ + + /* Interrupt callbacks */ + struct vme_irq irq[7]; + + /* Slave Functions */ + int (*slave_get) (struct vme_slave_resource *, int *, + unsigned long long *, unsigned long long *, dma_addr_t *, + vme_address_t *, vme_cycle_t *); + int (*slave_set) (struct vme_slave_resource *, int, unsigned long long, + unsigned long long, dma_addr_t, vme_address_t, vme_cycle_t); + + /* Master Functions */ + int (*master_get) (struct vme_master_resource *, int *, + unsigned long long *, unsigned long long *, vme_address_t *, + vme_cycle_t *, vme_width_t *); + int (*master_set) (struct vme_master_resource *, int, + unsigned long long, unsigned long long, vme_address_t, + vme_cycle_t, vme_width_t); + ssize_t (*master_read) (struct vme_master_resource *, void *, size_t, + loff_t); + ssize_t (*master_write) (struct vme_master_resource *, void *, size_t, + loff_t); + unsigned int (*master_rmw) (struct vme_master_resource *, unsigned int, + unsigned int, unsigned int, loff_t); + + /* DMA Functions */ + int (*dma_list_add) (struct vme_dma_list *, struct vme_dma_attr *, + struct vme_dma_attr *, size_t); + int (*dma_list_exec) (struct vme_dma_list *); + int (*dma_list_empty) (struct vme_dma_list *); + + /* Interrupt Functions */ + int (*request_irq) (int, int, void (*cback)(int, int, void*), void *); + void (*free_irq) (int, int); + int (*generate_irq) (int, int); + + /* Location monitor functions */ + int (*lm_set) (struct vme_lm_resource *, unsigned long long, + vme_address_t, vme_cycle_t); + int (*lm_get) (struct vme_lm_resource *, unsigned long long *, + vme_address_t *, vme_cycle_t *); + int (*lm_attach) (struct vme_lm_resource *, int, void (*callback)(int)); + int (*lm_detach) (struct vme_lm_resource *, int); + + /* CR/CSR space functions */ + int (*slot_get) (void); + /* Use standard master read and write functions to access CR/CSR */ + +#if 0 + int (*set_prefetch) (void); + int (*get_prefetch) (void); + int (*set_arbiter) (void); + int (*get_arbiter) (void); + int (*set_requestor) (void); + int (*get_requestor) (void); +#endif +}; + +int vme_register_bridge (struct vme_bridge *); +void vme_unregister_bridge (struct vme_bridge *); + +#endif /* _VME_BRIDGE_H_ */ + +#if 0 +/* + * VMEbus GET INFO Arg Structure + */ +struct vmeInfoCfg { + int vmeSlotNum; /* VME slot number of interest */ + int boardResponded; /* Board responded */ + char sysConFlag; /* System controller flag */ + int vmeControllerID; /* Vendor/device ID of VME bridge */ + int vmeControllerRev; /* Revision of VME bridge */ + char osName[8]; /* Name of OS e.g. "Linux" */ + int vmeSharedDataValid; /* Validity of data struct */ + int vmeDriverRev; /* Revision of VME driver */ + unsigned int vmeAddrHi[8]; /* Address on VME bus */ + unsigned int vmeAddrLo[8]; /* Address on VME bus */ + unsigned int vmeSize[8]; /* Size on VME bus */ + unsigned int vmeAm[8]; /* Address modifier on VME bus */ + int reserved; /* For future use */ +}; +typedef struct vmeInfoCfg vmeInfoCfg_t; + +/* + * VMEbus Requester Arg Structure + */ +struct vmeRequesterCfg { + int requestLevel; /* Requester Bus Request Level */ + char fairMode; /* Requester Fairness Mode Indicator */ + int releaseMode; /* Requester Bus Release Mode */ + int timeonTimeoutTimer; /* Master Time-on Time-out Timer */ + int timeoffTimeoutTimer; /* Master Time-off Time-out Timer */ + int reserved; /* For future use */ +}; +typedef struct vmeRequesterCfg vmeRequesterCfg_t; + +/* + * VMEbus Arbiter Arg Structure + */ +struct vmeArbiterCfg { + vme_arbitration_t arbiterMode; /* Arbitration Scheduling Algorithm */ + char arbiterTimeoutFlag; /* Arbiter Time-out Timer Indicator */ + int globalTimeoutTimer; /* VMEbus Global Time-out Timer */ + char noEarlyReleaseFlag; /* No Early Release on BBUSY */ + int reserved; /* For future use */ +}; +typedef struct vmeArbiterCfg vmeArbiterCfg_t; + + +/* + * VMEbus RMW Configuration Data + */ +struct vmeRmwCfg { + unsigned int targetAddrU; /* VME Address (Upper) to trigger RMW cycle */ + unsigned int targetAddr; /* VME Address (Lower) to trigger RMW cycle */ + vme_address_t addrSpace; /* VME Address Space */ + int enableMask; /* Bit mask defining the bits of interest */ + int compareData; /* Data to be compared with the data read */ + int swapData; /* Data written to the VMEbus on success */ + int maxAttempts; /* Maximum times to try */ + int numAttempts; /* Number of attempts before success */ + int reserved; /* For future use */ + +}; +typedef struct vmeRmwCfg vmeRmwCfg_t; + +/* + * VMEbus Location Monitor Arg Structure + */ +struct vmeLmCfg { + unsigned int addrU; /* Location Monitor Address upper */ + unsigned int addr; /* Location Monitor Address lower */ + vme_address_t addrSpace; /* Address Space */ + int userAccessType; /* User/Supervisor Access Type */ + int dataAccessType; /* Data/Program Access Type */ + int lmWait; /* Time to wait for access */ + int lmEvents; /* Lm event mask */ + int reserved; /* For future use */ +}; +typedef struct vmeLmCfg vmeLmCfg_t; +#endif |