diff options
Diffstat (limited to 'drivers/usb/c67x00/c67x00.h')
| -rw-r--r-- | drivers/usb/c67x00/c67x00.h | 285 |
1 files changed, 285 insertions, 0 deletions
diff --git a/drivers/usb/c67x00/c67x00.h b/drivers/usb/c67x00/c67x00.h new file mode 100644 index 0000000..1f1a2ee --- /dev/null +++ b/drivers/usb/c67x00/c67x00.h @@ -0,0 +1,285 @@ +/* + * c67x00.h: Cypress C67X00 USB register and field definitions + * + * Copyright (C) 2006-2008 Barco N.V. + * Derived from the Cypress cy7c67200/300 ezusb linux driver and + * based on multiple host controller drivers inside the linux kernel. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. + */ + +#ifndef _USB_C67X00_H +#define _USB_C67X00_H + +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/completion.h> +#include <linux/mutex.h> + +/* --------------------------------------------------------------------- + * Cypress C67x00 register definitions + */ + +/* Hardware Revision Register */ +#define HW_REV_REG 0xC004 + +/* General USB registers */ +/* ===================== */ + +/* USB Control Register */ +#define USB_CTL_REG(x) ((x) ? 0xC0AA : 0xC08A) + +#define LOW_SPEED_PORT(x) ((x) ? 0x0800 : 0x0400) +#define HOST_MODE 0x0200 +#define PORT_RES_EN(x) ((x) ? 0x0100 : 0x0080) +#define SOF_EOP_EN(x) ((x) ? 0x0002 : 0x0001) + +/* USB status register - Notice it has different content in hcd/udc mode */ +#define USB_STAT_REG(x) ((x) ? 0xC0B0 : 0xC090) + +#define EP0_IRQ_FLG 0x0001 +#define EP1_IRQ_FLG 0x0002 +#define EP2_IRQ_FLG 0x0004 +#define EP3_IRQ_FLG 0x0008 +#define EP4_IRQ_FLG 0x0010 +#define EP5_IRQ_FLG 0x0020 +#define EP6_IRQ_FLG 0x0040 +#define EP7_IRQ_FLG 0x0080 +#define RESET_IRQ_FLG 0x0100 +#define SOF_EOP_IRQ_FLG 0x0200 +#define ID_IRQ_FLG 0x4000 +#define VBUS_IRQ_FLG 0x8000 + +/* USB Host only registers */ +/* ======================= */ + +/* Host n Control Register */ +#define HOST_CTL_REG(x) ((x) ? 0xC0A0 : 0xC080) + +#define PREAMBLE_EN 0x0080 /* Preamble enable */ +#define SEQ_SEL 0x0040 /* Data Toggle Sequence Bit Select */ +#define ISO_EN 0x0010 /* Isochronous enable */ +#define ARM_EN 0x0001 /* Arm operation */ + +/* Host n Interrupt Enable Register */ +#define HOST_IRQ_EN_REG(x) ((x) ? 0xC0AC : 0xC08C) + +#define SOF_EOP_IRQ_EN 0x0200 /* SOF/EOP Interrupt Enable */ +#define SOF_EOP_TMOUT_IRQ_EN 0x0800 /* SOF/EOP Timeout Interrupt Enable */ +#define ID_IRQ_EN 0x4000 /* ID interrupt enable */ +#define VBUS_IRQ_EN 0x8000 /* VBUS interrupt enable */ +#define DONE_IRQ_EN 0x0001 /* Done Interrupt Enable */ + +/* USB status register */ +#define HOST_STAT_MASK 0x02FD +#define PORT_CONNECT_CHANGE(x) ((x) ? 0x0020 : 0x0010) +#define PORT_SE0_STATUS(x) ((x) ? 0x0008 : 0x0004) + +/* Host Frame Register */ +#define HOST_FRAME_REG(x) ((x) ? 0xC0B6 : 0xC096) + +#define HOST_FRAME_MASK 0x07FF + +/* USB Peripheral only registers */ +/* ============================= */ + +/* Device n Port Sel reg */ +#define DEVICE_N_PORT_SEL(x) ((x) ? 0xC0A4 : 0xC084) + +/* Device n Interrupt Enable Register */ +#define DEVICE_N_IRQ_EN_REG(x) ((x) ? 0xC0AC : 0xC08C) + +#define DEVICE_N_ENDPOINT_N_CTL_REG(dev, ep) ((dev) \ + ? (0x0280 + (ep << 4)) \ + : (0x0200 + (ep << 4))) +#define DEVICE_N_ENDPOINT_N_STAT_REG(dev, ep) ((dev) \ + ? (0x0286 + (ep << 4)) \ + : (0x0206 + (ep << 4))) + +#define DEVICE_N_ADDRESS(dev) ((dev) ? (0xC0AE) : (0xC08E)) + +/* HPI registers */ +/* ============= */ + +/* HPI Status register */ +#define SOFEOP_FLG(x) (1 << ((x) ? 12 : 10)) +#define SIEMSG_FLG(x) (1 << (4 + (x))) +#define RESET_FLG(x) ((x) ? 0x0200 : 0x0002) +#define DONE_FLG(x) (1 << (2 + (x))) +#define RESUME_FLG(x) (1 << (6 + (x))) +#define MBX_OUT_FLG 0x0001 /* Message out available */ +#define MBX_IN_FLG 0x0100 +#define ID_FLG 0x4000 +#define VBUS_FLG 0x8000 + +/* Interrupt routing register */ +#define HPI_IRQ_ROUTING_REG 0x0142 + +#define HPI_SWAP_ENABLE(x) ((x) ? 0x0100 : 0x0001) +#define RESET_TO_HPI_ENABLE(x) ((x) ? 0x0200 : 0x0002) +#define DONE_TO_HPI_ENABLE(x) ((x) ? 0x0008 : 0x0004) +#define RESUME_TO_HPI_ENABLE(x) ((x) ? 0x0080 : 0x0040) +#define SOFEOP_TO_HPI_EN(x) ((x) ? 0x2000 : 0x0800) +#define SOFEOP_TO_CPU_EN(x) ((x) ? 0x1000 : 0x0400) +#define ID_TO_HPI_ENABLE 0x4000 +#define VBUS_TO_HPI_ENABLE 0x8000 + +/* SIE msg registers */ +#define SIEMSG_REG(x) ((x) ? 0x0148 : 0x0144) + +#define HUSB_TDListDone 0x1000 + +#define SUSB_EP0_MSG 0x0001 +#define SUSB_EP1_MSG 0x0002 +#define SUSB_EP2_MSG 0x0004 +#define SUSB_EP3_MSG 0x0008 +#define SUSB_EP4_MSG 0x0010 +#define SUSB_EP5_MSG 0x0020 +#define SUSB_EP6_MSG 0x0040 +#define SUSB_EP7_MSG 0x0080 +#define SUSB_RST_MSG 0x0100 +#define SUSB_SOF_MSG 0x0200 +#define SUSB_CFG_MSG 0x0400 +#define SUSB_SUS_MSG 0x0800 +#define SUSB_ID_MSG 0x4000 +#define SUSB_VBUS_MSG 0x8000 + +/* BIOS interrupt routines */ + +#define SUSBx_RECEIVE_INT(x) ((x) ? 97 : 81) +#define SUSBx_SEND_INT(x) ((x) ? 96 : 80) + +#define SUSBx_DEV_DESC_VEC(x) ((x) ? 0x00D4 : 0x00B4) +#define SUSBx_CONF_DESC_VEC(x) ((x) ? 0x00D6 : 0x00B6) +#define SUSBx_STRING_DESC_VEC(x) ((x) ? 0x00D8 : 0x00B8) + +#define CY_HCD_BUF_ADDR 0x500 /* Base address for host */ +#define SIE_TD_SIZE 0x200 /* size of the td list */ +#define SIE_TD_BUF_SIZE 0x400 /* size of the data buffer */ + +#define SIE_TD_OFFSET(host) ((host) ? (SIE_TD_SIZE+SIE_TD_BUF_SIZE) : 0) +#define SIE_BUF_OFFSET(host) (SIE_TD_OFFSET(host) + SIE_TD_SIZE) + +/* Base address of HCD + 2 x TD_SIZE + 2 x TD_BUF_SIZE */ +#define CY_UDC_REQ_HEADER_BASE 0x1100 +/* 8- byte request headers for IN/OUT transfers */ +#define CY_UDC_REQ_HEADER_SIZE 8 + +#define CY_UDC_REQ_HEADER_ADDR(ep_num) (CY_UDC_REQ_HEADER_BASE + \ + ((ep_num) * CY_UDC_REQ_HEADER_SIZE)) +#define CY_UDC_DESC_BASE_ADDRESS (CY_UDC_REQ_HEADER_ADDR(8)) + +#define CY_UDC_BIOS_REPLACE_BASE 0x1800 +#define CY_UDC_REQ_BUFFER_BASE 0x2000 +#define CY_UDC_REQ_BUFFER_SIZE 0x0400 +#define CY_UDC_REQ_BUFFER_ADDR(ep_num) (CY_UDC_REQ_BUFFER_BASE + \ + ((ep_num) * CY_UDC_REQ_BUFFER_SIZE)) + +/* --------------------------------------------------------------------- + * Driver data structures + */ + +struct c67x00_device; + +/** + * struct c67x00_sie - Common data associated with a SIE + * @lock: lock to protect this struct and the associated chip registers + * @private_data: subdriver dependent data + * @irq: subdriver dependent irq handler, set NULL when not used + * @dev: link to common driver structure + * @sie_num: SIE number on chip, starting from 0 + * @mode: SIE mode (host/peripheral/otg/not used) + */ +struct c67x00_sie { + /* Entries to be used by the subdrivers */ + spinlock_t lock; /* protect this structure */ + void *private_data; + void (*irq) (struct c67x00_sie *sie, u16 int_status, u16 msg); + + /* Read only: */ + struct c67x00_device *dev; + int sie_num; + int mode; +}; + +#define sie_dev(s) (&(s)->dev->pdev->dev) + +/** + * struct c67x00_lcp + */ +struct c67x00_lcp { + /* Internal use only */ + struct mutex mutex; + struct completion msg_received; + u16 last_msg; +}; + +/* + * struct c67x00_hpi + */ +struct c67x00_hpi { + void __iomem *base; + int regstep; + spinlock_t lock; + struct c67x00_lcp lcp; +}; + +#define C67X00_SIES 2 +#define C67X00_PORTS 2 + +/** + * struct c67x00_device - Common data associated with a c67x00 instance + * @hpi: hpi addresses + * @sie: array of sie's on this chip + * @pdev: platform device of instance + * @pdata: configuration provided by the platform + */ +struct c67x00_device { + struct c67x00_hpi hpi; + struct c67x00_sie sie[C67X00_SIES]; + struct platform_device *pdev; + struct c67x00_platform_data *pdata; +}; + +/* --------------------------------------------------------------------- + * Low level interface functions + */ + +/* Host Port Interface (HPI) functions */ +u16 c67x00_ll_hpi_status(struct c67x00_device *dev); +void c67x00_ll_hpi_reg_init(struct c67x00_device *dev); +void c67x00_ll_hpi_enable_sofeop(struct c67x00_sie *sie); +void c67x00_ll_hpi_disable_sofeop(struct c67x00_sie *sie); + +/* General functions */ +u16 c67x00_ll_fetch_siemsg(struct c67x00_device *dev, int sie_num); +u16 c67x00_ll_get_usb_ctl(struct c67x00_sie *sie); +void c67x00_ll_usb_clear_status(struct c67x00_sie *sie, u16 bits); +u16 c67x00_ll_usb_get_status(struct c67x00_sie *sie); +void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr, + void *data, int len); +void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr, + void *data, int len); + +/* Called by c67x00_irq to handle lcp interrupts */ +void c67x00_ll_irq(struct c67x00_device *dev, u16 int_status); + +/* Setup and teardown */ +void c67x00_ll_init(struct c67x00_device *dev); +void c67x00_ll_release(struct c67x00_device *dev); +int c67x00_ll_reset(struct c67x00_device *dev); + +#endif /* _USB_C67X00_H */ |