diff options
Diffstat (limited to 'drivers/usb/gadget')
-rw-r--r-- | drivers/usb/gadget/dummy_hcd.c | 2 | ||||
-rw-r--r-- | drivers/usb/gadget/file_storage.c | 10 | ||||
-rw-r--r-- | drivers/usb/gadget/fsl_usb2_udc.c | 77 | ||||
-rw-r--r-- | drivers/usb/gadget/pxa2xx_udc.c | 4 | ||||
-rw-r--r-- | drivers/usb/gadget/serial.c | 25 |
5 files changed, 62 insertions, 56 deletions
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index f2fbdc7..d008d13 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -34,8 +34,6 @@ * bypassing some hardware (and driver) issues. UML could help too. */ -#define DEBUG - #include <linux/module.h> #include <linux/kernel.h> #include <linux/delay.h> diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index be7a1bd..965ad7b 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -599,7 +599,6 @@ enum fsg_buffer_state { struct fsg_buffhd { void *buf; - dma_addr_t dma; enum fsg_buffer_state state; struct fsg_buffhd *next; @@ -1295,6 +1294,7 @@ static int class_setup_req(struct fsg_dev *fsg, struct usb_request *req = fsg->ep0req; int value = -EOPNOTSUPP; u16 w_index = le16_to_cpu(ctrl->wIndex); + u16 w_value = le16_to_cpu(ctrl->wValue); u16 w_length = le16_to_cpu(ctrl->wLength); if (!fsg->config) @@ -1308,7 +1308,7 @@ static int class_setup_req(struct fsg_dev *fsg, if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != 0) { + if (w_index != 0 || w_value != 0) { value = -EDOM; break; } @@ -1324,7 +1324,7 @@ static int class_setup_req(struct fsg_dev *fsg, if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != 0) { + if (w_index != 0 || w_value != 0) { value = -EDOM; break; } @@ -1343,7 +1343,7 @@ static int class_setup_req(struct fsg_dev *fsg, if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != 0) { + if (w_index != 0 || w_value != 0) { value = -EDOM; break; } @@ -2611,7 +2611,6 @@ static int send_status(struct fsg_dev *fsg) fsg->intr_buffhd = bh; // Point to the right buffhd fsg->intreq->buf = bh->inreq->buf; - fsg->intreq->dma = bh->inreq->dma; fsg->intreq->context = bh; start_transfer(fsg, fsg->intr_in, fsg->intreq, &fsg->intreq_busy, &bh->state); @@ -3200,7 +3199,6 @@ reset: if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0) goto reset; bh->inreq->buf = bh->outreq->buf = bh->buf; - bh->inreq->dma = bh->outreq->dma = bh->dma; bh->inreq->context = bh->outreq->context = bh; bh->inreq->complete = bulk_in_complete; bh->outreq->complete = bulk_out_complete; diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index 10b2b33..d57bcfb 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -1277,31 +1277,32 @@ static void setup_received_irq(struct fsl_udc *udc, udc_reset_ep_queue(udc, 0); + /* We process some stardard setup requests here */ switch (setup->bRequest) { - /* Request that need Data+Status phase from udc */ case USB_REQ_GET_STATUS: - if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_STANDARD)) + /* Data+Status phase from udc */ + if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK)) != (USB_DIR_IN | USB_TYPE_STANDARD)) break; ch9getstatus(udc, setup->bRequestType, wValue, wIndex, wLength); - break; + return; - /* Requests that need Status phase from udc */ case USB_REQ_SET_ADDRESS: + /* Status phase from udc */ if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE)) break; ch9setaddress(udc, wValue, wIndex, wLength); - break; + return; - /* Handled by udc, no data, status by udc */ case USB_REQ_CLEAR_FEATURE: case USB_REQ_SET_FEATURE: - { /* status transaction */ + /* Status phase from udc */ + { int rc = -EOPNOTSUPP; - if ((setup->bRequestType & USB_RECIP_MASK) - == USB_RECIP_ENDPOINT) { + if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK)) + == (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) { int pipe = get_pipe_by_windex(wIndex); struct fsl_ep *ep; @@ -1315,8 +1316,9 @@ static void setup_received_irq(struct fsl_udc *udc, ? 1 : 0); spin_lock(&udc->lock); - } else if ((setup->bRequestType & USB_RECIP_MASK) - == USB_RECIP_DEVICE) { + } else if ((setup->bRequestType & (USB_RECIP_MASK + | USB_TYPE_MASK)) == (USB_RECIP_DEVICE + | USB_TYPE_STANDARD)) { /* Note: The driver has not include OTG support yet. * This will be set when OTG support is added */ if (!udc->gadget.is_otg) @@ -1329,39 +1331,42 @@ static void setup_received_irq(struct fsl_udc *udc, USB_DEVICE_A_ALT_HNP_SUPPORT) udc->gadget.a_alt_hnp_support = 1; rc = 0; - } + } else + break; + if (rc == 0) { if (ep0_prime_status(udc, EP_DIR_IN)) ep0stall(udc); } - break; + return; } - /* Requests handled by gadget */ - default: - if (wLength) { - /* Data phase from gadget, status phase from udc */ - udc->ep0_dir = (setup->bRequestType & USB_DIR_IN) - ? USB_DIR_IN : USB_DIR_OUT; - spin_unlock(&udc->lock); - if (udc->driver->setup(&udc->gadget, - &udc->local_setup_buff) < 0) - ep0stall(udc); - spin_lock(&udc->lock); - udc->ep0_state = (setup->bRequestType & USB_DIR_IN) - ? DATA_STATE_XMIT : DATA_STATE_RECV; - } else { - /* No data phase, IN status from gadget */ - udc->ep0_dir = USB_DIR_IN; - spin_unlock(&udc->lock); - if (udc->driver->setup(&udc->gadget, - &udc->local_setup_buff) < 0) - ep0stall(udc); - spin_lock(&udc->lock); - udc->ep0_state = WAIT_FOR_OUT_STATUS; - } + default: break; } + + /* Requests handled by gadget */ + if (wLength) { + /* Data phase from gadget, status phase from udc */ + udc->ep0_dir = (setup->bRequestType & USB_DIR_IN) + ? USB_DIR_IN : USB_DIR_OUT; + spin_unlock(&udc->lock); + if (udc->driver->setup(&udc->gadget, + &udc->local_setup_buff) < 0) + ep0stall(udc); + spin_lock(&udc->lock); + udc->ep0_state = (setup->bRequestType & USB_DIR_IN) + ? DATA_STATE_XMIT : DATA_STATE_RECV; + } else { + /* No data phase, IN status from gadget */ + udc->ep0_dir = USB_DIR_IN; + spin_unlock(&udc->lock); + if (udc->driver->setup(&udc->gadget, + &udc->local_setup_buff) < 0) + ep0stall(udc); + spin_lock(&udc->lock); + udc->ep0_state = WAIT_FOR_OUT_STATUS; + } } /* Process request for Data or Status phase of ep0 diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 72b4ebb..1407ad1 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -967,7 +967,7 @@ static int pxa2xx_udc_pullup(struct usb_gadget *_gadget, int is_active) udc = container_of(_gadget, struct pxa2xx_udc, gadget); /* not all boards support pullup control */ - if (!udc->mach->udc_command) + if (!udc->mach->gpio_pullup && !udc->mach->udc_command) return -EOPNOTSUPP; is_active = (is_active != 0); @@ -2309,7 +2309,7 @@ static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state) { struct pxa2xx_udc *udc = platform_get_drvdata(dev); - if (!udc->mach->udc_command) + if (!udc->mach->gpio_pullup && !udc->mach->udc_command) WARN("USB host won't detect disconnect!\n"); pullup(udc, 0); diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index 9cd98e7..ce4d2e0 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -1691,14 +1691,12 @@ static int gs_setup_class(struct usb_gadget *gadget, switch (ctrl->bRequest) { case USB_CDC_REQ_SET_LINE_CODING: - ret = min(wLength, - (u16)sizeof(struct usb_cdc_line_coding)); - if (port) { - spin_lock(&port->port_lock); - memcpy(&port->port_line_coding, req->buf, ret); - spin_unlock(&port->port_lock); - } - ret = 0; + /* FIXME Submit req to read the data; have its completion + * handler copy that data to port->port_line_coding (iff + * it's valid) and maybe pass it on. Until then, fail. + */ + printk(KERN_WARNING "gs_setup: set_line_coding " + "unuspported\n"); break; case USB_CDC_REQ_GET_LINE_CODING: @@ -1713,11 +1711,18 @@ static int gs_setup_class(struct usb_gadget *gadget, break; case USB_CDC_REQ_SET_CONTROL_LINE_STATE: - ret = 0; + /* FIXME Submit req to read the data; have its completion + * handler use that to set the state (iff it's valid) and + * maybe pass it on. Until then, fail. + */ + printk(KERN_WARNING "gs_setup: set_control_line_state " + "unuspported\n"); break; default: - printk(KERN_ERR "gs_setup: unknown class request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n", + printk(KERN_ERR "gs_setup: unknown class request, " + "type=%02x, request=%02x, value=%04x, " + "index=%04x, length=%d\n", ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength); break; |