diff options
Diffstat (limited to 'drivers/usb/serial/ftdi_sio.c')
| -rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 67 |
1 files changed, 12 insertions, 55 deletions
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index b65e657..c45f9c0 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -51,8 +51,6 @@ #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr, Johan Hovold <jhovold@gmail.com>" #define DRIVER_DESC "USB FTDI Serial Converters Driver" -static __u16 vendor = FTDI_VID; -static __u16 product; struct ftdi_private { enum ftdi_chip_type chip_type; @@ -144,8 +142,8 @@ static struct ftdi_sio_quirk ftdi_8u2232c_quirk = { /* - * Device ID not listed? Test via module params product/vendor or - * /sys/bus/usb/ftdi_sio/new_id, then send patch/report! + * Device ID not listed? Test it using + * /sys/bus/usb-serial/drivers/ftdi_sio/new_id and send a patch or report. */ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID) }, @@ -906,7 +904,6 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) }, /* Crucible Devices */ { USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) }, - { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -930,9 +927,6 @@ static const char *ftdi_chip_name[] = { #define FTDI_STATUS_B1_MASK (FTDI_RS_BI) /* End TIOCMIWAIT */ -#define FTDI_IMPL_ASYNC_FLAGS = (ASYNC_SPD_HI | ASYNC_SPD_VHI \ - | ASYNC_SPD_CUST | ASYNC_SPD_SHI | ASYNC_SPD_WARP) - /* function prototypes for a FTDI serial converter */ static int ftdi_sio_probe(struct usb_serial *serial, const struct usb_device_id *id); @@ -999,10 +993,6 @@ static struct usb_serial_driver * const serial_drivers[] = { #define WDR_TIMEOUT 5000 /* default urb timeout */ #define WDR_SHORT_TIMEOUT 1000 /* shorter urb timeout */ -/* High and low are for DTR, RTS etc etc */ -#define HIGH 1 -#define LOW 0 - /* * *************************************************************************** * Utility functions @@ -1571,8 +1561,8 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port) * *************************************************************************** */ -static ssize_t show_latency_timer(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t latency_timer_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); @@ -1582,11 +1572,10 @@ static ssize_t show_latency_timer(struct device *dev, return sprintf(buf, "%i\n", priv->latency); } - /* Write a new value of the latency timer, in units of milliseconds. */ -static ssize_t store_latency_timer(struct device *dev, - struct device_attribute *attr, const char *valbuf, - size_t count) +static ssize_t latency_timer_store(struct device *dev, + struct device_attribute *attr, + const char *valbuf, size_t count) { struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); @@ -1599,6 +1588,7 @@ static ssize_t store_latency_timer(struct device *dev, return -EIO; return count; } +static DEVICE_ATTR_RW(latency_timer); /* Write an event character directly to the FTDI register. The ASCII value is in the low 8 bits, with the enable bit in the 9th bit. */ @@ -1626,9 +1616,6 @@ static ssize_t store_event_char(struct device *dev, return count; } - -static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer, - store_latency_timer); static DEVICE_ATTR(event_char, S_IWUSR, NULL, store_event_char); static int create_sysfs_attrs(struct usb_serial_port *port) @@ -1867,7 +1854,6 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) { - struct ktermios dummy; struct usb_device *dev = port->serial->dev; struct ftdi_private *priv = usb_get_serial_port_data(port); @@ -1883,10 +1869,8 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) This is same behaviour as serial.c/rs_open() - Kuba */ /* ftdi_set_termios will send usb control messages */ - if (tty) { - memset(&dummy, 0, sizeof(dummy)); - ftdi_set_termios(tty, port, &dummy); - } + if (tty) + ftdi_set_termios(tty, port, NULL); return usb_serial_generic_open(tty, port); } @@ -2215,7 +2199,7 @@ no_data_parity_stop_changes: dev_err(ddev, "%s urb failed to set baudrate\n", __func__); mutex_unlock(&priv->cfg_lock); /* Ensure RTS and DTR are raised when baudrate changed from 0 */ - if (!old_termios || (old_termios->c_cflag & CBAUD) == B0) + if (old_termios && (old_termios->c_cflag & CBAUD) == B0) set_mctrl(port, TIOCM_DTR | TIOCM_RTS); } @@ -2405,38 +2389,11 @@ static int ftdi_ioctl(struct tty_struct *tty, return -ENOIOCTLCMD; } -static int __init ftdi_init(void) -{ - if (vendor > 0 && product > 0) { - /* Add user specified VID/PID to reserved element of table. */ - int i; - for (i = 0; id_table_combined[i].idVendor; i++) - ; - id_table_combined[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE; - id_table_combined[i].idVendor = vendor; - id_table_combined[i].idProduct = product; - } - return usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, id_table_combined); -} - -static void __exit ftdi_exit(void) -{ - usb_serial_deregister_drivers(serial_drivers); -} - - -module_init(ftdi_init); -module_exit(ftdi_exit); +module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -module_param(vendor, ushort, 0); -MODULE_PARM_DESC(vendor, "User specified vendor ID (default=" - __MODULE_STRING(FTDI_VID)")"); -module_param(product, ushort, 0); -MODULE_PARM_DESC(product, "User specified product ID"); - module_param(ndi_latency_timer, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(ndi_latency_timer, "NDI device latency timer override"); |