diff options
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r-- | drivers/usb/serial/Kconfig | 7 | ||||
-rw-r--r-- | drivers/usb/serial/Makefile | 1 | ||||
-rw-r--r-- | drivers/usb/serial/cp210x.c | 4 | ||||
-rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 31 | ||||
-rw-r--r-- | drivers/usb/serial/ftdi_sio_ids.h | 34 | ||||
-rw-r--r-- | drivers/usb/serial/mos7840.c | 175 | ||||
-rw-r--r-- | drivers/usb/serial/option.c | 23 | ||||
-rw-r--r-- | drivers/usb/serial/suunto.c | 41 | ||||
-rw-r--r-- | drivers/usb/serial/ti_usb_3410_5052.c | 2 |
9 files changed, 228 insertions, 90 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 8c3a42e..7eef9b3 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -719,6 +719,13 @@ config USB_SERIAL_FLASHLOADER To compile this driver as a module, choose M here: the module will be called flashloader. +config USB_SERIAL_SUUNTO + tristate "USB Suunto ANT+ driver" + help + Say Y here if you want to use the Suunto ANT+ USB device. + + To compile this driver as a module, choose M here: the + module will be called suunto. config USB_SERIAL_DEBUG tristate "USB Debugging Device" diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index f713011..a14a870 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -54,6 +54,7 @@ obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI) += siemens_mpi.o obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o obj-$(CONFIG_USB_SERIAL_SPCP8X5) += spcp8x5.o obj-$(CONFIG_USB_SERIAL_SSU100) += ssu100.o +obj-$(CONFIG_USB_SERIAL_SUUNTO) += suunto.o obj-$(CONFIG_USB_SERIAL_SYMBOL) += symbolserial.o obj-$(CONFIG_USB_SERIAL_WWAN) += usb_wwan.o obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index d6ef2f8..0eae4ba 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -53,6 +53,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ { USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */ + { USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */ { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */ { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */ { USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */ @@ -118,6 +119,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */ { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */ { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */ + { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */ + { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */ @@ -148,6 +151,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */ { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ + { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */ { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */ { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */ { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 7260ec6..b65e657 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -735,9 +735,34 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID), .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) }, - { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) }, - { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) }, - { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_RTS01_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S03_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_59_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57A_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57B_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29A_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29B_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29F_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_62B_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S01_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_63_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29C_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_81B_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_82B_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K5D_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K4Y_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K5G_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S05_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_60_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_61_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_62_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_63B_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_64_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_65_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_92_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_92D_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_W5R_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_A5R_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_PW1_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) }, { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 6dd7925..1b8af46 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -815,11 +815,35 @@ /* * RT Systems programming cables for various ham radios */ -#define RTSYSTEMS_VID 0x2100 /* Vendor ID */ -#define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */ -#define RTSYSTEMS_CT29B_PID 0x9e54 /* CT29B Radio Cable */ -#define RTSYSTEMS_RTS01_PID 0x9e57 /* USB-RTS01 Radio Cable */ - +#define RTSYSTEMS_VID 0x2100 /* Vendor ID */ +#define RTSYSTEMS_USB_S03_PID 0x9001 /* RTS-03 USB to Serial Adapter */ +#define RTSYSTEMS_USB_59_PID 0x9e50 /* USB-59 USB to 8 pin plug */ +#define RTSYSTEMS_USB_57A_PID 0x9e51 /* USB-57A USB to 4pin 3.5mm plug */ +#define RTSYSTEMS_USB_57B_PID 0x9e52 /* USB-57B USB to extended 4pin 3.5mm plug */ +#define RTSYSTEMS_USB_29A_PID 0x9e53 /* USB-29A USB to 3.5mm stereo plug */ +#define RTSYSTEMS_USB_29B_PID 0x9e54 /* USB-29B USB to 6 pin mini din */ +#define RTSYSTEMS_USB_29F_PID 0x9e55 /* USB-29F USB to 6 pin modular plug */ +#define RTSYSTEMS_USB_62B_PID 0x9e56 /* USB-62B USB to 8 pin mini din plug*/ +#define RTSYSTEMS_USB_S01_PID 0x9e57 /* USB-RTS01 USB to 3.5 mm stereo plug*/ +#define RTSYSTEMS_USB_63_PID 0x9e58 /* USB-63 USB to 9 pin female*/ +#define RTSYSTEMS_USB_29C_PID 0x9e59 /* USB-29C USB to 4 pin modular plug*/ +#define RTSYSTEMS_USB_81B_PID 0x9e5A /* USB-81 USB to 8 pin mini din plug*/ +#define RTSYSTEMS_USB_82B_PID 0x9e5B /* USB-82 USB to 2.5 mm stereo plug*/ +#define RTSYSTEMS_USB_K5D_PID 0x9e5C /* USB-K5D USB to 8 pin modular plug*/ +#define RTSYSTEMS_USB_K4Y_PID 0x9e5D /* USB-K4Y USB to 2.5/3.5 mm plugs*/ +#define RTSYSTEMS_USB_K5G_PID 0x9e5E /* USB-K5G USB to 8 pin modular plug*/ +#define RTSYSTEMS_USB_S05_PID 0x9e5F /* USB-RTS05 USB to 2.5 mm stereo plug*/ +#define RTSYSTEMS_USB_60_PID 0x9e60 /* USB-60 USB to 6 pin din*/ +#define RTSYSTEMS_USB_61_PID 0x9e61 /* USB-61 USB to 6 pin mini din*/ +#define RTSYSTEMS_USB_62_PID 0x9e62 /* USB-62 USB to 8 pin mini din*/ +#define RTSYSTEMS_USB_63B_PID 0x9e63 /* USB-63 USB to 9 pin female*/ +#define RTSYSTEMS_USB_64_PID 0x9e64 /* USB-64 USB to 9 pin male*/ +#define RTSYSTEMS_USB_65_PID 0x9e65 /* USB-65 USB to 9 pin female null modem*/ +#define RTSYSTEMS_USB_92_PID 0x9e66 /* USB-92 USB to 12 pin plug*/ +#define RTSYSTEMS_USB_92D_PID 0x9e67 /* USB-92D USB to 12 pin plug data*/ +#define RTSYSTEMS_USB_W5R_PID 0x9e68 /* USB-W5R USB to 8 pin modular plug*/ +#define RTSYSTEMS_USB_A5R_PID 0x9e69 /* USB-A5R USB to 8 pin modular plug*/ +#define RTSYSTEMS_USB_PW1_PID 0x9e6A /* USB-PW1 USB to 8 pin modular plug*/ /* * Physik Instrumente diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 0a818b2..d953d67 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -183,7 +183,10 @@ #define LED_ON_MS 500 #define LED_OFF_MS 500 -static int device_type; +enum mos7840_flag { + MOS7840_FLAG_CTRL_BUSY, + MOS7840_FLAG_LED_BUSY, +}; static const struct usb_device_id id_table[] = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, @@ -238,9 +241,12 @@ struct moschip_port { /* For device(s) with LED indicator */ bool has_led; - bool led_flag; struct timer_list led_timer1; /* Timer for LED on */ struct timer_list led_timer2; /* Timer for LED off */ + struct urb *led_urb; + struct usb_ctrlrequest *led_dr; + + unsigned long flags; }; /* @@ -460,10 +466,10 @@ static void mos7840_control_callback(struct urb *urb) case -ESHUTDOWN: /* this urb is terminated, clean up */ dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); - return; + goto out; default: dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); - return; + goto out; } dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length); @@ -476,6 +482,8 @@ static void mos7840_control_callback(struct urb *urb) mos7840_handle_new_msr(mos7840_port, regval); else if (mos7840_port->MsrLsr == 1) mos7840_handle_new_lsr(mos7840_port, regval); +out: + clear_bit_unlock(MOS7840_FLAG_CTRL_BUSY, &mos7840_port->flags); } static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg, @@ -486,6 +494,9 @@ static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg, unsigned char *buffer = mcs->ctrl_buf; int ret; + if (test_and_set_bit_lock(MOS7840_FLAG_CTRL_BUSY, &mcs->flags)) + return -EBUSY; + dr->bRequestType = MCS_RD_RTYPE; dr->bRequest = MCS_RDREQ; dr->wValue = cpu_to_le16(Wval); /* 0 */ @@ -497,6 +508,9 @@ static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg, mos7840_control_callback, mcs); mcs->control_urb->transfer_buffer_length = 2; ret = usb_submit_urb(mcs->control_urb, GFP_ATOMIC); + if (ret) + clear_bit_unlock(MOS7840_FLAG_CTRL_BUSY, &mcs->flags); + return ret; } @@ -523,7 +537,7 @@ static void mos7840_set_led_async(struct moschip_port *mcs, __u16 wval, __u16 reg) { struct usb_device *dev = mcs->port->serial->dev; - struct usb_ctrlrequest *dr = mcs->dr; + struct usb_ctrlrequest *dr = mcs->led_dr; dr->bRequestType = MCS_WR_RTYPE; dr->bRequest = MCS_WRREQ; @@ -531,10 +545,10 @@ static void mos7840_set_led_async(struct moschip_port *mcs, __u16 wval, dr->wIndex = cpu_to_le16(reg); dr->wLength = cpu_to_le16(0); - usb_fill_control_urb(mcs->control_urb, dev, usb_sndctrlpipe(dev, 0), + usb_fill_control_urb(mcs->led_urb, dev, usb_sndctrlpipe(dev, 0), (unsigned char *)dr, NULL, 0, mos7840_set_led_callback, NULL); - usb_submit_urb(mcs->control_urb, GFP_ATOMIC); + usb_submit_urb(mcs->led_urb, GFP_ATOMIC); } static void mos7840_set_led_sync(struct usb_serial_port *port, __u16 reg, @@ -560,7 +574,19 @@ static void mos7840_led_flag_off(unsigned long arg) { struct moschip_port *mcs = (struct moschip_port *) arg; - mcs->led_flag = false; + clear_bit_unlock(MOS7840_FLAG_LED_BUSY, &mcs->flags); +} + +static void mos7840_led_activity(struct usb_serial_port *port) +{ + struct moschip_port *mos7840_port = usb_get_serial_port_data(port); + + if (test_and_set_bit_lock(MOS7840_FLAG_LED_BUSY, &mos7840_port->flags)) + return; + + mos7840_set_led_async(mos7840_port, 0x0301, MODEM_CONTROL_REGISTER); + mod_timer(&mos7840_port->led_timer1, + jiffies + msecs_to_jiffies(LED_ON_MS)); } /***************************************************************************** @@ -758,14 +784,8 @@ static void mos7840_bulk_in_callback(struct urb *urb) return; } - /* Turn on LED */ - if (mos7840_port->has_led && !mos7840_port->led_flag) { - mos7840_port->led_flag = true; - mos7840_set_led_async(mos7840_port, 0x0301, - MODEM_CONTROL_REGISTER); - mod_timer(&mos7840_port->led_timer1, - jiffies + msecs_to_jiffies(LED_ON_MS)); - } + if (mos7840_port->has_led) + mos7840_led_activity(port); mos7840_port->read_urb_busy = true; retval = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); @@ -816,18 +836,6 @@ static void mos7840_bulk_out_data_callback(struct urb *urb) /************************************************************************/ /* D R I V E R T T Y I N T E R F A C E F U N C T I O N S */ /************************************************************************/ -#ifdef MCSSerialProbe -static int mos7840_serial_probe(struct usb_serial *serial, - const struct usb_device_id *id) -{ - - /*need to implement the mode_reg reading and updating\ - structures usb_serial_ device_type\ - (i.e num_ports, num_bulkin,bulkout etc) */ - /* Also we can update the changes attach */ - return 1; -} -#endif /***************************************************************************** * mos7840_open @@ -905,20 +913,20 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); if (status < 0) { dev_dbg(&port->dev, "Reading Spreg failed\n"); - return -1; + goto err; } Data |= 0x80; status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); if (status < 0) { dev_dbg(&port->dev, "writing Spreg failed\n"); - return -1; + goto err; } Data &= ~0x80; status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); if (status < 0) { dev_dbg(&port->dev, "writing Spreg failed\n"); - return -1; + goto err; } /* End of block to be checked */ @@ -927,7 +935,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) &Data); if (status < 0) { dev_dbg(&port->dev, "Reading Controlreg failed\n"); - return -1; + goto err; } Data |= 0x08; /* Driver done bit */ Data |= 0x20; /* rx_disable */ @@ -935,7 +943,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) mos7840_port->ControlRegOffset, Data); if (status < 0) { dev_dbg(&port->dev, "writing Controlreg failed\n"); - return -1; + goto err; } /* do register settings here */ /* Set all regs to the device default values. */ @@ -946,21 +954,21 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); if (status < 0) { dev_dbg(&port->dev, "disabling interrupts failed\n"); - return -1; + goto err; } /* Set FIFO_CONTROL_REGISTER to the default value */ Data = 0x00; status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); if (status < 0) { dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n"); - return -1; + goto err; } Data = 0xcf; status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); if (status < 0) { dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n"); - return -1; + goto err; } Data = 0x03; @@ -1103,6 +1111,15 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) /* mos7840_change_port_settings(mos7840_port,old_termios); */ return 0; +err: + for (j = 0; j < NUM_URBS; ++j) { + urb = mos7840_port->write_urb_pool[j]; + if (!urb) + continue; + kfree(urb->transfer_buffer); + usb_free_urb(urb); + } + return status; } /***************************************************************************** @@ -1445,13 +1462,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, data1 = urb->transfer_buffer; dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress); - /* Turn on LED */ - if (mos7840_port->has_led && !mos7840_port->led_flag) { - mos7840_port->led_flag = true; - mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0301); - mod_timer(&mos7840_port->led_timer1, - jiffies + msecs_to_jiffies(LED_ON_MS)); - } + if (mos7840_port->has_led) + mos7840_led_activity(port); /* send it down the pipe */ status = usb_submit_urb(urb, GFP_ATOMIC); @@ -2178,38 +2190,48 @@ static int mos7810_check(struct usb_serial *serial) return 0; } -static int mos7840_calc_num_ports(struct usb_serial *serial) +static int mos7840_probe(struct usb_serial *serial, + const struct usb_device_id *id) { - __u16 data = 0x00; + u16 product = serial->dev->descriptor.idProduct; u8 *buf; - int mos7840_num_ports; + int device_type; + + if (product == MOSCHIP_DEVICE_ID_7810 || + product == MOSCHIP_DEVICE_ID_7820) { + device_type = product; + goto out; + } buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL); - if (buf) { - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + if (!buf) + return -ENOMEM; + + usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); - data = *buf; - kfree(buf); - } - if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 || - serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) { - device_type = serial->dev->descriptor.idProduct; - } else { - /* For a MCS7840 device GPIO0 must be set to 1 */ - if ((data & 0x01) == 1) - device_type = MOSCHIP_DEVICE_ID_7840; - else if (mos7810_check(serial)) - device_type = MOSCHIP_DEVICE_ID_7810; - else - device_type = MOSCHIP_DEVICE_ID_7820; - } + /* For a MCS7840 device GPIO0 must be set to 1 */ + if (buf[0] & 0x01) + device_type = MOSCHIP_DEVICE_ID_7840; + else if (mos7810_check(serial)) + device_type = MOSCHIP_DEVICE_ID_7810; + else + device_type = MOSCHIP_DEVICE_ID_7820; + + kfree(buf); +out: + usb_set_serial_data(serial, (void *)(unsigned long)device_type); + + return 0; +} + +static int mos7840_calc_num_ports(struct usb_serial *serial) +{ + int device_type = (unsigned long)usb_get_serial_data(serial); + int mos7840_num_ports; mos7840_num_ports = (device_type >> 4) & 0x000F; - serial->num_bulk_in = mos7840_num_ports; - serial->num_bulk_out = mos7840_num_ports; - serial->num_ports = mos7840_num_ports; return mos7840_num_ports; } @@ -2217,6 +2239,7 @@ static int mos7840_calc_num_ports(struct usb_serial *serial) static int mos7840_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; + int device_type = (unsigned long)usb_get_serial_data(serial); struct moschip_port *mos7840_port; int status; int pnum; @@ -2392,6 +2415,14 @@ static int mos7840_port_probe(struct usb_serial_port *port) if (device_type == MOSCHIP_DEVICE_ID_7810) { mos7840_port->has_led = true; + mos7840_port->led_urb = usb_alloc_urb(0, GFP_KERNEL); + mos7840_port->led_dr = kmalloc(sizeof(*mos7840_port->led_dr), + GFP_KERNEL); + if (!mos7840_port->led_urb || !mos7840_port->led_dr) { + status = -ENOMEM; + goto error; + } + init_timer(&mos7840_port->led_timer1); mos7840_port->led_timer1.function = mos7840_led_off; mos7840_port->led_timer1.expires = @@ -2404,8 +2435,6 @@ static int mos7840_port_probe(struct usb_serial_port *port) jiffies + msecs_to_jiffies(LED_OFF_MS); mos7840_port->led_timer2.data = (unsigned long)mos7840_port; - mos7840_port->led_flag = false; - /* Turn off LED */ mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300); } @@ -2427,6 +2456,8 @@ out: } return 0; error: + kfree(mos7840_port->led_dr); + usb_free_urb(mos7840_port->led_urb); kfree(mos7840_port->dr); kfree(mos7840_port->ctrl_buf); usb_free_urb(mos7840_port->control_urb); @@ -2447,6 +2478,10 @@ static int mos7840_port_remove(struct usb_serial_port *port) del_timer_sync(&mos7840_port->led_timer1); del_timer_sync(&mos7840_port->led_timer2); + + usb_kill_urb(mos7840_port->led_urb); + usb_free_urb(mos7840_port->led_urb); + kfree(mos7840_port->led_dr); } usb_kill_urb(mos7840_port->control_urb); usb_free_urb(mos7840_port->control_urb); @@ -2473,9 +2508,7 @@ static struct usb_serial_driver moschip7840_4port_device = { .throttle = mos7840_throttle, .unthrottle = mos7840_unthrottle, .calc_num_ports = mos7840_calc_num_ports, -#ifdef MCSSerialProbe - .probe = mos7840_serial_probe, -#endif + .probe = mos7840_probe, .ioctl = mos7840_ioctl, .set_termios = mos7840_set_termios, .break_ctl = mos7840_break, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5dd857d..1cf6f12 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -341,17 +341,12 @@ static void option_instat_callback(struct urb *urb); #define OLIVETTI_VENDOR_ID 0x0b3c #define OLIVETTI_PRODUCT_OLICARD100 0xc000 #define OLIVETTI_PRODUCT_OLICARD145 0xc003 +#define OLIVETTI_PRODUCT_OLICARD200 0xc005 /* Celot products */ #define CELOT_VENDOR_ID 0x211f #define CELOT_PRODUCT_CT680M 0x6801 -/* ONDA Communication vendor id */ -#define ONDA_VENDOR_ID 0x1ee8 - -/* ONDA MT825UP HSDPA 14.2 modem */ -#define ONDA_MT825UP 0x000b - /* Samsung products */ #define SAMSUNG_VENDOR_ID 0x04e8 #define SAMSUNG_PRODUCT_GT_B3730 0x6889 @@ -444,7 +439,8 @@ static void option_instat_callback(struct urb *urb); /* Hyundai Petatel Inc. products */ #define PETATEL_VENDOR_ID 0x1ff4 -#define PETATEL_PRODUCT_NP10T 0x600e +#define PETATEL_PRODUCT_NP10T_600A 0x600a +#define PETATEL_PRODUCT_NP10T_600E 0x600e /* TP-LINK Incorporated products */ #define TPLINK_VENDOR_ID 0x2357 @@ -782,6 +778,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) }, @@ -817,7 +814,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, @@ -1256,8 +1254,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) }, + { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200) }, { USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */ - { USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */ { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) }, { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM610) }, @@ -1329,9 +1327,12 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) }, { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) }, { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) }, - { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) }, + { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600A) }, + { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600E) }, { USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE(TPLINK_VENDOR_ID, 0x9000), /* TP-Link MA260 */ + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) }, { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x02, 0x01) }, /* D-Link DWM-156 (variant) */ { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x00, 0x00) }, /* D-Link DWM-156 (variant) */ @@ -1339,6 +1340,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x00, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x02, 0x01) }, { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/suunto.c b/drivers/usb/serial/suunto.c new file mode 100644 index 0000000..2248e7a --- /dev/null +++ b/drivers/usb/serial/suunto.c @@ -0,0 +1,41 @@ +/* + * Suunto ANT+ USB Driver + * + * Copyright (C) 2013 Greg Kroah-Hartman <gregkh@linuxfoundation.org> + * Copyright (C) 2013 Linux Foundation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation only. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/uaccess.h> + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(0x0fcf, 0x1008) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_serial_driver suunto_device = { + .driver = { + .owner = THIS_MODULE, + .name = KBUILD_MODNAME, + }, + .id_table = id_table, + .num_ports = 1, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &suunto_device, + NULL, +}; + +module_usb_serial_driver(serial_drivers, id_table); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 7182bb7..375b5a4 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -371,7 +371,7 @@ static int ti_startup(struct usb_serial *serial) usb_set_serial_data(serial, tdev); /* determine device type */ - if (usb_match_id(serial->interface, ti_id_table_3410)) + if (serial->type == &ti_1port_device) tdev->td_is_3410 = 1; dev_dbg(&dev->dev, "%s - device type is %s\n", __func__, tdev->td_is_3410 ? "3410" : "5052"); |