diff options
Diffstat (limited to 'drivers')
32 files changed, 692 insertions, 987 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5987e0b..6bdedd7 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -820,7 +820,7 @@ config PATA_PLATFORM config PATA_OF_PLATFORM tristate "OpenFirmware platform device PATA support" - depends on PATA_PLATFORM && PPC_OF + depends on PATA_PLATFORM && OF help This option enables support for generic directly connected ATA devices commonly found on embedded systems with OpenFirmware @@ -831,6 +831,7 @@ config PATA_OF_PLATFORM config PATA_QDI tristate "QDI VLB PATA support" depends on ISA + select PATA_LEGACY help Support for QDI 6500 and 6580 PATA controllers on VESA local bus. diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 9550d69..6ece5b7 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -88,7 +88,6 @@ obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o -obj-$(CONFIG_PATA_QDI) += pata_qdi.o obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 6fef1fa..c03277d 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -23,6 +23,41 @@ #include <linux/ahci_platform.h> #include "ahci.h" +enum ahci_type { + AHCI, /* standard platform ahci */ + IMX53_AHCI, /* ahci on i.mx53 */ +}; + +static struct platform_device_id ahci_devtype[] = { + { + .name = "ahci", + .driver_data = AHCI, + }, { + .name = "imx53-ahci", + .driver_data = IMX53_AHCI, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, ahci_devtype); + + +static const struct ata_port_info ahci_port_info[] = { + /* by features */ + [AHCI] = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, + [IMX53_AHCI] = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_pmp_retry_srst_ops, + }, +}; + static struct scsi_host_template ahci_platform_sht = { AHCI_SHT("ahci_platform"), }; @@ -31,12 +66,8 @@ static int __init ahci_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct ahci_platform_data *pdata = dev->platform_data; - struct ata_port_info pi = { - .flags = AHCI_FLAG_COMMON, - .pio_mask = ATA_PIO4, - .udma_mask = ATA_UDMA6, - .port_ops = &ahci_ops, - }; + const struct platform_device_id *id = platform_get_device_id(pdev); + struct ata_port_info pi = ahci_port_info[id->driver_data]; const struct ata_port_info *ppi[] = { &pi, NULL }; struct ahci_host_priv *hpriv; struct ata_host *host; @@ -177,6 +208,7 @@ static struct platform_driver ahci_driver = { .name = "ahci", .owner = THIS_MODULE, }, + .id_table = ahci_devtype, }; static int __init ahci_init(void) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 43107e9..69ac373 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -113,6 +113,8 @@ enum { PIIX_PATA_FLAGS = ATA_FLAG_SLAVE_POSS, PIIX_SATA_FLAGS = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR, + PIIX_FLAG_PIO16 = (1 << 30), /*support 16bit PIO only*/ + PIIX_80C_PRI = (1 << 5) | (1 << 4), PIIX_80C_SEC = (1 << 7) | (1 << 6), @@ -147,6 +149,7 @@ enum piix_controller_ids { ich8m_apple_sata, /* locks up on second port enable */ tolapai_sata, piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */ + ich8_sata_snb, }; struct piix_map_db { @@ -177,6 +180,7 @@ static int piix_sidpr_scr_write(struct ata_link *link, static int piix_sidpr_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, unsigned hints); static bool piix_irq_check(struct ata_port *ap); +static int piix_port_start(struct ata_port *ap); #ifdef CONFIG_PM static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); static int piix_pci_device_resume(struct pci_dev *pdev); @@ -298,21 +302,21 @@ static const struct pci_device_id piix_pci_tbl[] = { /* SATA Controller IDE (PCH) */ { 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* SATA Controller IDE (CPT) */ - { 0x8086, 0x1c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + { 0x8086, 0x1c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, /* SATA Controller IDE (CPT) */ - { 0x8086, 0x1c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + { 0x8086, 0x1c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, /* SATA Controller IDE (CPT) */ { 0x8086, 0x1c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (CPT) */ { 0x8086, 0x1c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (PBG) */ - { 0x8086, 0x1d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + { 0x8086, 0x1d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, /* SATA Controller IDE (PBG) */ { 0x8086, 0x1d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (Panther Point) */ - { 0x8086, 0x1e00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + { 0x8086, 0x1e00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, /* SATA Controller IDE (Panther Point) */ - { 0x8086, 0x1e01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + { 0x8086, 0x1e01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, /* SATA Controller IDE (Panther Point) */ { 0x8086, 0x1e08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (Panther Point) */ @@ -338,6 +342,7 @@ static struct scsi_host_template piix_sht = { static struct ata_port_operations piix_sata_ops = { .inherits = &ata_bmdma32_port_ops, .sff_irq_check = piix_irq_check, + .port_start = piix_port_start, }; static struct ata_port_operations piix_pata_ops = { @@ -478,6 +483,7 @@ static const struct piix_map_db *piix_map_db_table[] = { [ich8_2port_sata] = &ich8_2port_map_db, [ich8m_apple_sata] = &ich8m_apple_map_db, [tolapai_sata] = &tolapai_map_db, + [ich8_sata_snb] = &ich8_map_db, }; static struct ata_port_info piix_port_info[] = { @@ -606,6 +612,19 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_vmw_ops, }, + /* + * some Sandybridge chipsets have broken 32 mode up to now, + * see https://bugzilla.kernel.org/show_bug.cgi?id=40592 + */ + [ich8_sata_snb] = + { + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR | PIIX_FLAG_PIO16, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, + }, + }; static struct pci_bits piix_enable_bits[] = { @@ -649,6 +668,14 @@ static const struct ich_laptop ich_laptop[] = { { 0, } }; +static int piix_port_start(struct ata_port *ap) +{ + if (!(ap->flags & PIIX_FLAG_PIO16)) + ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE; + + return ata_bmdma_port_start(ap); +} + /** * ich_pata_cable_detect - Probe host controller cable detect info * @ap: Port for which cable detect info is desired @@ -704,22 +731,11 @@ static int piix_pata_prereset(struct ata_link *link, unsigned long deadline) static DEFINE_SPINLOCK(piix_lock); -/** - * piix_set_piomode - Initialize host controller PATA PIO timings - * @ap: Port whose timings we are configuring - * @adev: um - * - * Set PIO mode for device, in host controller PCI config space. - * - * LOCKING: - * None (inherited from caller). - */ - -static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev) +static void piix_set_timings(struct ata_port *ap, struct ata_device *adev, + u8 pio) { struct pci_dev *dev = to_pci_dev(ap->host->dev); unsigned long flags; - unsigned int pio = adev->pio_mode - XFER_PIO_0; unsigned int is_slave = (adev->devno != 0); unsigned int master_port= ap->port_no ? 0x42 : 0x40; unsigned int slave_port = 0x44; @@ -744,10 +760,16 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev) control |= 1; /* TIME1 enable */ if (ata_pio_need_iordy(adev)) control |= 2; /* IE enable */ - /* Intel specifies that the PPE functionality is for disk only */ if (adev->class == ATA_DEV_ATA) control |= 4; /* PPE enable */ + /* + * If the drive MWDMA is faster than it can do PIO then + * we must force PIO into PIO0 + */ + if (adev->pio_mode < XFER_PIO_0 + pio) + /* Enable DMA timing only */ + control |= 8; /* PIO cycles in PIO0 */ spin_lock_irqsave(&piix_lock, flags); @@ -759,8 +781,6 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev) if (is_slave) { /* clear TIME1|IE1|PPE1|DTE1 */ master_data &= 0xff0f; - /* Enable SITRE (separate slave timing register) */ - master_data |= 0x4000; /* enable PPE1, IE1 and TIME1 as needed */ master_data |= (control << 4); pci_read_config_byte(dev, slave_port, &slave_data); @@ -778,6 +798,9 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev) (timings[pio][0] << 12) | (timings[pio][1] << 8); } + + /* Enable SITRE (separate slave timing register) */ + master_data |= 0x4000; pci_write_config_word(dev, master_port, master_data); if (is_slave) pci_write_config_byte(dev, slave_port, slave_data); @@ -795,6 +818,22 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev) } /** + * piix_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Drive in question + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + piix_set_timings(ap, adev, adev->pio_mode - XFER_PIO_0); +} + +/** * do_pata_set_dmamode - Initialize host controller PATA PIO timings * @ap: Port whose timings we are configuring * @adev: Drive in question @@ -810,31 +849,20 @@ static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, in { struct pci_dev *dev = to_pci_dev(ap->host->dev); unsigned long flags; - u8 master_port = ap->port_no ? 0x42 : 0x40; - u16 master_data; u8 speed = adev->dma_mode; int devid = adev->devno + 2 * ap->port_no; u8 udma_enable = 0; - static const /* ISP RTC */ - u8 timings[][2] = { { 0, 0 }, - { 0, 0 }, - { 1, 0 }, - { 2, 1 }, - { 2, 3 }, }; - - spin_lock_irqsave(&piix_lock, flags); - - pci_read_config_word(dev, master_port, &master_data); - if (ap->udma_mask) - pci_read_config_byte(dev, 0x48, &udma_enable); - if (speed >= XFER_UDMA_0) { - unsigned int udma = adev->dma_mode - XFER_UDMA_0; + unsigned int udma = speed - XFER_UDMA_0; u16 udma_timing; u16 ideconf; int u_clock, u_speed; + spin_lock_irqsave(&piix_lock, flags); + + pci_read_config_byte(dev, 0x48, &udma_enable); + /* * UDMA is handled by a combination of clock switching and * selection of dividers @@ -867,56 +895,21 @@ static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, in performance (WR_PingPong_En) */ pci_write_config_word(dev, 0x54, ideconf); } + + pci_write_config_byte(dev, 0x48, udma_enable); + + spin_unlock_irqrestore(&piix_lock, flags); } else { - /* - * MWDMA is driven by the PIO timings. We must also enable - * IORDY unconditionally along with TIME1. PPE has already - * been set when the PIO timing was set. - */ - unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0; - unsigned int control; - u8 slave_data; + /* MWDMA is driven by the PIO timings. */ + unsigned int mwdma = speed - XFER_MW_DMA_0; const unsigned int needed_pio[3] = { XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 }; int pio = needed_pio[mwdma] - XFER_PIO_0; - control = 3; /* IORDY|TIME1 */ - - /* If the drive MWDMA is faster than it can do PIO then - we must force PIO into PIO0 */ - - if (adev->pio_mode < needed_pio[mwdma]) - /* Enable DMA timing only */ - control |= 8; /* PIO cycles in PIO0 */ - - if (adev->devno) { /* Slave */ - master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */ - master_data |= control << 4; - pci_read_config_byte(dev, 0x44, &slave_data); - slave_data &= (ap->port_no ? 0x0f : 0xf0); - /* Load the matching timing */ - slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0); - pci_write_config_byte(dev, 0x44, slave_data); - } else { /* Master */ - master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY - and master timing bits */ - master_data |= control; - master_data |= - (timings[pio][0] << 12) | - (timings[pio][1] << 8); - } - - if (ap->udma_mask) - udma_enable &= ~(1 << devid); - - pci_write_config_word(dev, master_port, master_data); + /* XFER_PIO_0 is never used currently */ + piix_set_timings(ap, adev, pio); } - /* Don't scribble on 0x48 if the controller does not support UDMA */ - if (ap->udma_mask) - pci_write_config_byte(dev, 0x48, udma_enable); - - spin_unlock_irqrestore(&piix_lock, flags); } /** diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 4a3a5ae..32fc41c 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2938,7 +2938,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ memset(&p, 0, sizeof(p)); - if (speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) { + if (speed >= XFER_PIO_0 && speed < XFER_SW_DMA_0) { if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO]; else if ((speed <= XFER_PIO_4) || diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index ed16fbe..c021186 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2532,8 +2532,7 @@ static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset, return reset(link, classes, deadline); } -static int ata_eh_followup_srst_needed(struct ata_link *link, - int rc, const unsigned int *classes) +static int ata_eh_followup_srst_needed(struct ata_link *link, int rc) { if ((link->flags & ATA_LFLAG_NO_SRST) || ata_link_offline(link)) return 0; @@ -2726,7 +2725,7 @@ int ata_eh_reset(struct ata_link *link, int classify, /* perform follow-up SRST if necessary */ if (reset == hardreset && - ata_eh_followup_srst_needed(link, rc, classes)) { + ata_eh_followup_srst_needed(link, rc)) { reset = softreset; if (!reset) { diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index c24127d..239bfa6 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -569,7 +569,7 @@ unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf, /* Transfer trailing byte, if any. */ if (unlikely(buflen & 0x01)) { - unsigned char pad[2]; + unsigned char pad[2] = { }; /* Point buf to the tail of buffer */ buf += buflen - 1; @@ -628,7 +628,7 @@ unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf, /* Transfer trailing bytes, if any */ if (unlikely(slop)) { - unsigned char pad[4]; + unsigned char pad[4] = { }; /* Point buf to the tail of buffer */ buf += buflen - slop; @@ -678,7 +678,7 @@ unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev, unsigned char *buf, unsigned int consumed; local_irq_save(flags); - consumed = ata_sff_data_xfer(dev, buf, buflen, rw); + consumed = ata_sff_data_xfer32(dev, buf, buflen, rw); local_irq_restore(flags); return consumed; @@ -2507,31 +2507,10 @@ static const struct ata_port_info *ata_sff_find_valid_pi( return NULL; } -/** - * ata_pci_sff_init_one - Initialize/register PIO-only PCI IDE controller - * @pdev: Controller to be initialized - * @ppi: array of port_info, must be enough for two ports - * @sht: scsi_host_template to use when registering the host - * @host_priv: host private_data - * @hflag: host flags - * - * This is a helper function which can be called from a driver's - * xxx_init_one() probe function if the hardware uses traditional - * IDE taskfile registers and is PIO only. - * - * ASSUMPTION: - * Nobody makes a single channel controller that appears solely as - * the secondary legacy port on PCI. - * - * LOCKING: - * Inherited from PCI layer (may sleep). - * - * RETURNS: - * Zero on success, negative on errno-based value on error. - */ -int ata_pci_sff_init_one(struct pci_dev *pdev, - const struct ata_port_info * const *ppi, - struct scsi_host_template *sht, void *host_priv, int hflag) +static int ata_pci_init_one(struct pci_dev *pdev, + const struct ata_port_info * const *ppi, + struct scsi_host_template *sht, void *host_priv, + int hflags, bool bmdma) { struct device *dev = &pdev->dev; const struct ata_port_info *pi; @@ -2553,14 +2532,22 @@ int ata_pci_sff_init_one(struct pci_dev *pdev, if (rc) goto out; - /* prepare and activate SFF host */ - rc = ata_pci_sff_prepare_host(pdev, ppi, &host); + if (bmdma) + /* prepare and activate BMDMA host */ + rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); + else + /* prepare and activate SFF host */ + rc = ata_pci_sff_prepare_host(pdev, ppi, &host); if (rc) goto out; host->private_data = host_priv; - host->flags |= hflag; + host->flags |= hflags; - rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht); + if (bmdma) { + pci_set_master(pdev); + rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht); + } else + rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht); out: if (rc == 0) devres_remove_group(&pdev->dev, NULL); @@ -2569,6 +2556,35 @@ out: return rc; } + +/** + * ata_pci_sff_init_one - Initialize/register PIO-only PCI IDE controller + * @pdev: Controller to be initialized + * @ppi: array of port_info, must be enough for two ports + * @sht: scsi_host_template to use when registering the host + * @host_priv: host private_data + * @hflag: host flags + * + * This is a helper function which can be called from a driver's + * xxx_init_one() probe function if the hardware uses traditional + * IDE taskfile registers and is PIO only. + * + * ASSUMPTION: + * Nobody makes a single channel controller that appears solely as + * the secondary legacy port on PCI. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, negative on errno-based value on error. + */ +int ata_pci_sff_init_one(struct pci_dev *pdev, + const struct ata_port_info * const *ppi, + struct scsi_host_template *sht, void *host_priv, int hflag) +{ + return ata_pci_init_one(pdev, ppi, sht, host_priv, hflag, 0); +} EXPORT_SYMBOL_GPL(ata_pci_sff_init_one); #endif /* CONFIG_PCI */ @@ -3286,42 +3302,7 @@ int ata_pci_bmdma_init_one(struct pci_dev *pdev, struct scsi_host_template *sht, void *host_priv, int hflags) { - struct device *dev = &pdev->dev; - const struct ata_port_info *pi; - struct ata_host *host = NULL; - int rc; - - DPRINTK("ENTER\n"); - - pi = ata_sff_find_valid_pi(ppi); - if (!pi) { - dev_err(&pdev->dev, "no valid port_info specified\n"); - return -EINVAL; - } - - if (!devres_open_group(dev, NULL, GFP_KERNEL)) - return -ENOMEM; - - rc = pcim_enable_device(pdev); - if (rc) - goto out; - - /* prepare and activate BMDMA host */ - rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); - if (rc) - goto out; - host->private_data = host_priv; - host->flags |= hflags; - - pci_set_master(pdev); - rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht); - out: - if (rc == 0) - devres_remove_group(&pdev->dev, NULL); - else - devres_release_group(&pdev->dev, NULL); - - return rc; + return ata_pci_init_one(pdev, ppi, sht, host_priv, hflags, 1); } EXPORT_SYMBOL_GPL(ata_pci_bmdma_init_one); diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index cadd679..61da069 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -56,7 +56,7 @@ static const struct dmi_system_id cable_dmi_table[] = { }, }, { - .ident = "Toshiba Satelite S1800-814", + .ident = "Toshiba Satellite S1800-814", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"), diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c index 719bb73..e8574bb 100644 --- a/drivers/ata/pata_arasan_cf.c +++ b/drivers/ata/pata_arasan_cf.c @@ -922,8 +922,7 @@ static int __devexit arasan_cf_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int arasan_cf_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct ata_host *host = dev_get_drvdata(dev); struct arasan_cf_dev *acdev = host->ports[0]->private_data; if (acdev->dma_chan) { @@ -937,8 +936,7 @@ static int arasan_cf_suspend(struct device *dev) static int arasan_cf_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct ata_host *host = dev_get_drvdata(dev); struct arasan_cf_dev *acdev = host->ports[0]->private_data; cf_init(acdev); diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c index 78a93b6..4b8b22e 100644 --- a/drivers/ata/pata_artop.c +++ b/drivers/ata/pata_artop.c @@ -2,7 +2,7 @@ * pata_artop.c - ARTOP ATA controller driver * * (C) 2006 Red Hat - * (C) 2007 Bartlomiej Zolnierkiewicz + * (C) 2007,2011 Bartlomiej Zolnierkiewicz * * Based in part on drivers/ide/pci/aec62xx.c * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org> @@ -28,7 +28,7 @@ #include <linux/ata.h> #define DRV_NAME "pata_artop" -#define DRV_VERSION "0.4.5" +#define DRV_VERSION "0.4.6" /* * The ARTOP has 33 Mhz and "over clocked" timing tables. Until we @@ -39,31 +39,15 @@ static int clock = 0; -static int artop6210_pre_reset(struct ata_link *link, unsigned long deadline) -{ - struct ata_port *ap = link->ap; - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - const struct pci_bits artop_enable_bits[] = { - { 0x4AU, 1U, 0x02UL, 0x02UL }, /* port 0 */ - { 0x4AU, 1U, 0x04UL, 0x04UL }, /* port 1 */ - }; - - if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no])) - return -ENOENT; - - return ata_sff_prereset(link, deadline); -} - /** - * artop6260_pre_reset - check for 40/80 pin + * artop62x0_pre_reset - probe begin * @link: link * @deadline: deadline jiffies for the operation * - * The ARTOP hardware reports the cable detect bits in register 0x49. * Nothing complicated needed here. */ -static int artop6260_pre_reset(struct ata_link *link, unsigned long deadline) +static int artop62x0_pre_reset(struct ata_link *link, unsigned long deadline) { static const struct pci_bits artop_enable_bits[] = { { 0x4AU, 1U, 0x02UL, 0x02UL }, /* port 0 */ @@ -73,7 +57,7 @@ static int artop6260_pre_reset(struct ata_link *link, unsigned long deadline) struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - /* Odd numbered device ids are the units with enable bits (the -R cards) */ + /* Odd numbered device ids are the units with enable bits. */ if ((pdev->device & 1) && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no])) return -ENOENT; @@ -317,7 +301,7 @@ static struct ata_port_operations artop6210_ops = { .cable_detect = ata_cable_40wire, .set_piomode = artop6210_set_piomode, .set_dmamode = artop6210_set_dmamode, - .prereset = artop6210_pre_reset, + .prereset = artop62x0_pre_reset, .qc_defer = artop6210_qc_defer, }; @@ -326,9 +310,36 @@ static struct ata_port_operations artop6260_ops = { .cable_detect = artop6260_cable_detect, .set_piomode = artop6260_set_piomode, .set_dmamode = artop6260_set_dmamode, - .prereset = artop6260_pre_reset, + .prereset = artop62x0_pre_reset, }; +static void atp8xx_fixup(struct pci_dev *pdev) +{ + if (pdev->device == 0x0005) + /* BIOS may have left us in UDMA, clear it before libata probe */ + pci_write_config_byte(pdev, 0x54, 0); + else if (pdev->device == 0x0008 || pdev->device == 0x0009) { + u8 reg; + + /* Mac systems come up with some registers not set as we + will need them */ + + /* Clear reset & test bits */ + pci_read_config_byte(pdev, 0x49, ®); + pci_write_config_byte(pdev, 0x49, reg & ~0x30); + + /* PCI latency must be > 0x80 for burst mode, tweak it + * if required. + */ + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, ®); + if (reg <= 0x80) + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x90); + + /* Enable IRQ output and burst mode */ + pci_read_config_byte(pdev, 0x4a, ®); + pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80); + } +} /** * artop_init_one - Register ARTOP ATA PCI device with kernel services @@ -383,42 +394,22 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) if (rc) return rc; - if (id->driver_data == 0) { /* 6210 variant */ + if (id->driver_data == 0) /* 6210 variant */ ppi[0] = &info_6210; - /* BIOS may have left us in UDMA, clear it before libata probe */ - pci_write_config_byte(pdev, 0x54, 0); - } else if (id->driver_data == 1) /* 6260 */ ppi[0] = &info_626x; else if (id->driver_data == 2) { /* 6280 or 6280 + fast */ unsigned long io = pci_resource_start(pdev, 4); - u8 reg; ppi[0] = &info_628x; if (inb(io) & 0x10) ppi[0] = &info_628x_fast; - /* Mac systems come up with some registers not set as we - will need them */ - - /* Clear reset & test bits */ - pci_read_config_byte(pdev, 0x49, ®); - pci_write_config_byte(pdev, 0x49, reg & ~ 0x30); - - /* PCI latency must be > 0x80 for burst mode, tweak it - * if required. - */ - pci_read_config_byte(pdev, PCI_LATENCY_TIMER, ®); - if (reg <= 0x80) - pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x90); - - /* Enable IRQ output and burst mode */ - pci_read_config_byte(pdev, 0x4a, ®); - pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80); - } BUG_ON(ppi[0] == NULL); + atp8xx_fixup(pdev); + return ata_pci_bmdma_init_one(pdev, ppi, &artop_sht, NULL, 0); } @@ -432,11 +423,32 @@ static const struct pci_device_id artop_pci_tbl[] = { { } /* terminate list */ }; +#ifdef CONFIG_PM +static int atp8xx_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + atp8xx_fixup(pdev); + + ata_host_resume(host); + return 0; +} +#endif + static struct pci_driver artop_pci_driver = { .name = DRV_NAME, .id_table = artop_pci_tbl, .probe = artop_init_one, .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = ata_pci_device_suspend, + .resume = atp8xx_reinit_one, +#endif }; static int __init artop_init(void) @@ -452,9 +464,8 @@ static void __exit artop_exit(void) module_init(artop_init); module_exit(artop_exit); -MODULE_AUTHOR("Alan Cox"); +MODULE_AUTHOR("Alan Cox, Bartlomiej Zolnierkiewicz"); MODULE_DESCRIPTION("SCSI low-level driver for ARTOP PATA"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, artop_pci_tbl); MODULE_VERSION(DRV_VERSION); - diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c index 960c725..c6d1409 100644 --- a/drivers/ata/pata_at91.c +++ b/drivers/ata/pata_at91.c @@ -414,10 +414,13 @@ static int __devinit pata_at91_probe(struct platform_device *pdev) host->private_data = info; - return ata_host_activate(host, irq ? gpio_to_irq(irq) : 0, + ret = ata_host_activate(host, irq ? gpio_to_irq(irq) : 0, irq ? ata_sff_interrupt : NULL, irq_flags, &pata_at91_sht); + if (!ret) + return 0; + err_put: clk_put(info->mck); return ret; diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index 4375561..be1aa14 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -49,6 +49,31 @@ static int atiixp_cable_detect(struct ata_port *ap) static DEFINE_SPINLOCK(atiixp_lock); /** + * atiixp_prereset - perform reset handling + * @link: ATA link + * @deadline: deadline jiffies for the operation + * + * Reset sequence checking enable bits to see which ports are + * active. + */ + +static int atiixp_prereset(struct ata_link *link, unsigned long deadline) +{ + static const struct pci_bits atiixp_enable_bits[] = { + { 0x48, 1, 0x01, 0x00 }, + { 0x48, 1, 0x08, 0x00 } + }; + + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no])) + return -ENOENT; + + return ata_sff_prereset(link, deadline); +} + +/** * atiixp_set_pio_timing - set initial PIO mode data * @ap: ATA interface * @adev: ATA device @@ -221,6 +246,7 @@ static struct ata_port_operations atiixp_port_ops = { .bmdma_start = atiixp_bmdma_start, .bmdma_stop = atiixp_bmdma_stop, + .prereset = atiixp_prereset, .cable_detect = atiixp_cable_detect, .set_piomode = atiixp_set_piomode, .set_dmamode = atiixp_set_dmamode, @@ -235,16 +261,7 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .udma_mask = ATA_UDMA5, .port_ops = &atiixp_port_ops }; - static const struct pci_bits atiixp_enable_bits[] = { - { 0x48, 1, 0x01, 0x00 }, - { 0x48, 1, 0x08, 0x00 } - }; const struct ata_port_info *ppi[] = { &info, &info }; - int i; - - for (i = 0; i < 2; i++) - if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i])) - ppi[i] = &ata_dummy_port_info; return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL, ATA_HOST_PARALLEL_SCAN); diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index 7bafc16..e1fb39a 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -82,7 +82,7 @@ static int cmd648_cable_detect(struct ata_port *ap) } /** - * cmd64x_set_piomode - set PIO and MWDMA timing + * cmd64x_set_timing - set PIO and MWDMA timing * @ap: ATA interface * @adev: ATA device * @mode: mode @@ -288,6 +288,22 @@ static struct ata_port_operations cmd648_port_ops = { .cable_detect = cmd648_cable_detect, }; +static void cmd64x_fixup(struct pci_dev *pdev) +{ + u8 mrdmode; + + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64); + pci_read_config_byte(pdev, MRDMODE, &mrdmode); + mrdmode &= ~0x30; /* IRQ set up */ + mrdmode |= 0x02; /* Memory read line enable */ + pci_write_config_byte(pdev, MRDMODE, mrdmode); + + /* PPC specific fixup copied from old driver */ +#ifdef CONFIG_PPC + pci_write_config_byte(pdev, UDIDETCR0, 0xF0); +#endif +} + static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info cmd_info[6] = { @@ -336,7 +352,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) &cmd_info[id->driver_data], NULL }; - u8 mrdmode, reg; + u8 reg; int rc; struct pci_dev *bridge = pdev->bus->self; /* mobility split bridges don't report enabled ports correctly */ @@ -368,11 +384,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) cntrl_ch0_ok = 0; } - pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64); - pci_read_config_byte(pdev, MRDMODE, &mrdmode); - mrdmode &= ~ 0x30; /* IRQ set up */ - mrdmode |= 0x02; /* Memory read line enable */ - pci_write_config_byte(pdev, MRDMODE, mrdmode); + cmd64x_fixup(pdev); /* check for enabled ports */ pci_read_config_byte(pdev, CNTRL, ®); @@ -388,13 +400,6 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) ppi[1] = &ata_dummy_port_info; } - /* Force PIO 0 here.. */ - - /* PPC specific fixup copied from old driver */ -#ifdef CONFIG_PPC - pci_write_config_byte(pdev, UDIDETCR0, 0xF0); -#endif - return ata_pci_bmdma_init_one(pdev, ppi, &cmd64x_sht, NULL, 0); } @@ -402,21 +407,14 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) static int cmd64x_reinit_one(struct pci_dev *pdev) { struct ata_host *host = dev_get_drvdata(&pdev->dev); - u8 mrdmode; int rc; rc = ata_pci_device_do_resume(pdev); if (rc) return rc; - pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64); - pci_read_config_byte(pdev, MRDMODE, &mrdmode); - mrdmode &= ~ 0x30; /* IRQ set up */ - mrdmode |= 0x02; /* Memory read line enable */ - pci_write_config_byte(pdev, MRDMODE, mrdmode); -#ifdef CONFIG_PPC - pci_write_config_byte(pdev, UDIDETCR0, 0xF0); -#endif + cmd64x_fixup(pdev); + ata_host_resume(host); return 0; } diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index 03a9318..a0b4640 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -38,7 +38,7 @@ #include <linux/libata.h> #include <asm/msr.h> -#define DRV_NAME "cs5535" +#define DRV_NAME "pata_cs5535" #define DRV_VERSION "0.2.12" /* @@ -67,8 +67,6 @@ #define CS5535_CABLE_DETECT 0x48 -#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL)==0x00009172 ) - /** * cs5535_cable_detect - detect cable type * @ap: Port to detect on @@ -188,16 +186,6 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) }; const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; - u32 timings, dummy; - - /* Check the BIOS set the initial timing clock. If not set the - timings for PIO0 */ - rdmsr(ATAC_CH0D0_PIO, timings, dummy); - if (CS5535_BAD_PIO(timings)) - wrmsr(ATAC_CH0D0_PIO, 0xF7F4F7F4UL, 0); - rdmsr(ATAC_CH0D1_PIO, timings, dummy); - if (CS5535_BAD_PIO(timings)) - wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0); return ata_pci_bmdma_init_one(dev, ppi, &cs5535_sht, NULL, 0); } @@ -230,7 +218,7 @@ static void __exit cs5535_exit(void) } MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch"); -MODULE_DESCRIPTION("low-level driver for the NS/AMD 5530"); +MODULE_DESCRIPTION("low-level driver for the NS/AMD 5535"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, cs5535); MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index aca47e4..f0243ed 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -73,7 +73,7 @@ static DEFINE_SPINLOCK(efar_lock); /** * efar_set_piomode - Initialize host controller PATA PIO timings * @ap: Port whose timings we are configuring - * @adev: um + * @adev: Device to program * * Set PIO mode for device, in host controller PCI config space. * @@ -85,9 +85,9 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) { unsigned int pio = adev->pio_mode - XFER_PIO_0; struct pci_dev *dev = to_pci_dev(ap->host->dev); - unsigned int idetm_port= ap->port_no ? 0x42 : 0x40; + unsigned int master_port = ap->port_no ? 0x42 : 0x40; unsigned long flags; - u16 idetm_data; + u16 master_data; u8 udma_enable; int control = 0; @@ -113,20 +113,20 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) spin_lock_irqsave(&efar_lock, flags); - pci_read_config_word(dev, idetm_port, &idetm_data); + pci_read_config_word(dev, master_port, &master_data); /* Set PPE, IE, and TIME as appropriate */ if (adev->devno == 0) { - idetm_data &= 0xCCF0; - idetm_data |= control; - idetm_data |= (timings[pio][0] << 12) | + master_data &= 0xCCF0; + master_data |= control; + master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8); } else { int shift = 4 * ap->port_no; u8 slave_data; - idetm_data &= 0xFF0F; - idetm_data |= (control << 4); + master_data &= 0xFF0F; + master_data |= (control << 4); /* Slave timing in separate register */ pci_read_config_byte(dev, 0x44, &slave_data); @@ -135,8 +135,8 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) pci_write_config_byte(dev, 0x44, slave_data); } - idetm_data |= 0x4000; /* Ensure SITRE is set */ - pci_write_config_word(dev, idetm_port, idetm_data); + master_data |= 0x4000; /* Ensure SITRE is set */ + pci_write_config_word(dev, master_port, master_data); pci_read_config_byte(dev, 0x48, &udma_enable); udma_enable &= ~(1 << (2 * ap->port_no + adev->devno)); diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index 6c77d68..42cffd3 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -111,6 +111,28 @@ static const struct hpt_clock hpt366_25[] = { { 0, 0x01208585 } }; +/** + * hpt36x_find_mode - find the hpt36x timing + * @ap: ATA port + * @speed: transfer mode + * + * Return the 32bit register programming information for this channel + * that matches the speed provided. + */ + +static u32 hpt36x_find_mode(struct ata_port *ap, int speed) +{ + struct hpt_clock *clocks = ap->host->private_data; + + while (clocks->xfer_mode) { + if (clocks->xfer_mode == speed) + return clocks->timing; + clocks++; + } + BUG(); + return 0xffffffffU; /* silence compiler warning */ +} + static const char * const bad_ata33[] = { "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", "Maxtor 90845U3", "Maxtor 90650U2", @@ -210,10 +232,9 @@ static int hpt36x_cable_detect(struct ata_port *ap) static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mode) { - struct hpt_clock *clocks = ap->host->private_data; struct pci_dev *pdev = to_pci_dev(ap->host->dev); u32 addr = 0x40 + 4 * adev->devno; - u32 mask, reg; + u32 mask, reg, t; /* determine timing mask and find matching clock entry */ if (mode < XFER_MW_DMA_0) @@ -223,13 +244,7 @@ static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev, else mask = 0x30070000; - while (clocks->xfer_mode) { - if (clocks->xfer_mode == mode) - break; - clocks++; - } - if (!clocks->xfer_mode) - BUG(); + t = hpt36x_find_mode(ap, mode); /* * Combine new mode bits with old config bits and disable @@ -237,7 +252,7 @@ static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev, * problems handling I/O errors later. */ pci_read_config_dword(pdev, addr, ®); - reg = ((reg & ~mask) | (clocks->timing & mask)) & ~0xc0000000; + reg = ((reg & ~mask) | (t & mask)) & ~0xc0000000; pci_write_config_dword(pdev, addr, reg); } diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c index 998af0e..cf9164d 100644 --- a/drivers/ata/pata_it8213.c +++ b/drivers/ata/pata_it8213.c @@ -76,8 +76,8 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev) { unsigned int pio = adev->pio_mode - XFER_PIO_0; struct pci_dev *dev = to_pci_dev(ap->host->dev); - unsigned int idetm_port= ap->port_no ? 0x42 : 0x40; - u16 idetm_data; + unsigned int master_port = ap->port_no ? 0x42 : 0x40; + u16 master_data; int control = 0; /* @@ -100,19 +100,19 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev) if (adev->class != ATA_DEV_ATA) control |= 4; /* PPE */ - pci_read_config_word(dev, idetm_port, &idetm_data); + pci_read_config_word(dev, master_port, &master_data); /* Set PPE, IE, and TIME as appropriate */ if (adev->devno == 0) { - idetm_data &= 0xCCF0; - idetm_data |= control; - idetm_data |= (timings[pio][0] << 12) | + master_data &= 0xCCF0; + master_data |= control; + master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8); } else { u8 slave_data; - idetm_data &= 0xFF0F; - idetm_data |= (control << 4); + master_data &= 0xFF0F; + master_data |= (control << 4); /* Slave timing in separate register */ pci_read_config_byte(dev, 0x44, &slave_data); @@ -121,8 +121,8 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev) pci_write_config_byte(dev, 0x44, slave_data); } - idetm_data |= 0x4000; /* Ensure SITRE is set */ - pci_write_config_word(dev, idetm_port, idetm_data); + master_data |= 0x4000; /* Ensure SITRE is set */ + pci_write_config_word(dev, master_port, master_data); } /** @@ -163,7 +163,7 @@ static void it8213_set_dmamode (struct ata_port *ap, struct ata_device *adev) /* Clocks follow the PIIX style */ u_speed = min(2 - (udma & 1), udma); - if (udma == 5) + if (udma > 4) u_clock = 0x1000; /* 100Mhz */ else if (udma > 2) u_clock = 1; /* 66Mhz */ @@ -262,7 +262,7 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA12_ONLY, - .udma_mask = ATA_UDMA4, /* FIXME: want UDMA 100? */ + .udma_mask = ATA_UDMA6, .port_ops = &it8213_ops, }; /* Current IT8213 stuff is single port */ diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index d960f8e..35aca7d 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -79,15 +79,6 @@ static int all; module_param(all, int, 0444); MODULE_PARM_DESC(all, "Grab all legacy port devices, even if PCI(0=off, 1=on)"); -struct legacy_data { - unsigned long timing; - u8 clock[2]; - u8 last; - int fast; - struct platform_device *platform_dev; - -}; - enum controller { BIOS = 0, SNOOP = 1, @@ -104,6 +95,14 @@ enum controller { UNKNOWN = -1 }; +struct legacy_data { + unsigned long timing; + u8 clock[2]; + u8 last; + int fast; + enum controller type; + struct platform_device *platform_dev; +}; struct legacy_probe { unsigned char *name; @@ -137,11 +136,17 @@ static int ht6560a; /* HT 6560A on primary 1, second 2, both 3 */ static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */ static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */ static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */ -static int qdi; /* Set to probe QDI controllers */ static int autospeed; /* Chip present which snoops speed changes */ static int pio_mask = ATA_PIO4; /* PIO range for autospeed devices */ static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */ +/* Set to probe QDI controllers */ +#ifdef CONFIG_PATA_QDI_MODULE +static int qdi = 1; +#else +static int qdi; +#endif + #ifdef CONFIG_PATA_WINBOND_VLB_MODULE static int winbond = 1; /* Set to probe Winbond controllers, give I/O port if non standard */ @@ -631,40 +636,20 @@ static struct ata_port_operations opti82c46x_port_ops = { .qc_issue = opti82c46x_qc_issue, }; -static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev) -{ - struct ata_timing t; - struct legacy_data *ld_qdi = ap->host->private_data; - int active, recovery; - u8 timing; - - /* Get the timing data in cycles */ - ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); - - if (ld_qdi->fast) { - active = 8 - clamp_val(t.active, 1, 8); - recovery = 18 - clamp_val(t.recover, 3, 18); - } else { - active = 9 - clamp_val(t.active, 2, 9); - recovery = 15 - clamp_val(t.recover, 0, 15); - } - timing = (recovery << 4) | active | 0x08; - - ld_qdi->clock[adev->devno] = timing; - - outb(timing, ld_qdi->timing); -} - /** - * qdi6580dp_set_piomode - PIO setup for dual channel + * qdi65x0_set_piomode - PIO setup for QDI65x0 * @ap: Port * @adev: Device * + * In single channel mode the 6580 has one clock per device and we can + * avoid the requirement to clock switch. We also have to load the timing + * into the right clock according to whether we are master or slave. + * * In dual channel mode the 6580 has one clock per channel and we have * to software clockswitch in qc_issue. */ -static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev) +static void qdi65x0_set_piomode(struct ata_port *ap, struct ata_device *adev) { struct ata_timing t; struct legacy_data *ld_qdi = ap->host->private_data; @@ -682,47 +667,15 @@ static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev) recovery = 15 - clamp_val(t.recover, 0, 15); } timing = (recovery << 4) | active | 0x08; - ld_qdi->clock[adev->devno] = timing; - outb(timing, ld_qdi->timing + 2 * ap->port_no); - /* Clear the FIFO */ - if (adev->class != ATA_DEV_ATA) - outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3); -} - -/** - * qdi6580_set_piomode - PIO setup for single channel - * @ap: Port - * @adev: Device - * - * In single channel mode the 6580 has one clock per device and we can - * avoid the requirement to clock switch. We also have to load the timing - * into the right clock according to whether we are master or slave. - */ - -static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev) -{ - struct ata_timing t; - struct legacy_data *ld_qdi = ap->host->private_data; - int active, recovery; - u8 timing; - - /* Get the timing data in cycles */ - ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + if (ld_qdi->type == QDI6580) + outb(timing, ld_qdi->timing + 2 * adev->devno); + else + outb(timing, ld_qdi->timing + 2 * ap->port_no); - if (ld_qdi->fast) { - active = 8 - clamp_val(t.active, 1, 8); - recovery = 18 - clamp_val(t.recover, 3, 18); - } else { - active = 9 - clamp_val(t.active, 2, 9); - recovery = 15 - clamp_val(t.recover, 0, 15); - } - timing = (recovery << 4) | active | 0x08; - ld_qdi->clock[adev->devno] = timing; - outb(timing, ld_qdi->timing + 2 * adev->devno); /* Clear the FIFO */ - if (adev->class != ATA_DEV_ATA) + if (ld_qdi->type != QDI6500 && adev->class != ATA_DEV_ATA) outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3); } @@ -789,20 +742,20 @@ static int qdi_port(struct platform_device *dev, static struct ata_port_operations qdi6500_port_ops = { .inherits = &legacy_base_port_ops, - .set_piomode = qdi6500_set_piomode, + .set_piomode = qdi65x0_set_piomode, .qc_issue = qdi_qc_issue, .sff_data_xfer = vlb32_data_xfer, }; static struct ata_port_operations qdi6580_port_ops = { .inherits = &legacy_base_port_ops, - .set_piomode = qdi6580_set_piomode, + .set_piomode = qdi65x0_set_piomode, .sff_data_xfer = vlb32_data_xfer, }; static struct ata_port_operations qdi6580dp_port_ops = { .inherits = &legacy_base_port_ops, - .set_piomode = qdi6580dp_set_piomode, + .set_piomode = qdi65x0_set_piomode, .qc_issue = qdi_qc_issue, .sff_data_xfer = vlb32_data_xfer, }; @@ -879,29 +832,29 @@ static struct ata_port_operations winbond_port_ops = { }; static struct legacy_controller controllers[] = { - {"BIOS", &legacy_port_ops, 0x1F, + {"BIOS", &legacy_port_ops, ATA_PIO4, ATA_FLAG_NO_IORDY, 0, NULL }, - {"Snooping", &simple_port_ops, 0x1F, + {"Snooping", &simple_port_ops, ATA_PIO4, 0, 0, NULL }, - {"PDC20230", &pdc20230_port_ops, 0x7, + {"PDC20230", &pdc20230_port_ops, ATA_PIO2, ATA_FLAG_NO_IORDY, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, NULL }, - {"HT6560A", &ht6560a_port_ops, 0x07, + {"HT6560A", &ht6560a_port_ops, ATA_PIO2, ATA_FLAG_NO_IORDY, 0, NULL }, - {"HT6560B", &ht6560b_port_ops, 0x1F, + {"HT6560B", &ht6560b_port_ops, ATA_PIO4, ATA_FLAG_NO_IORDY, 0, NULL }, - {"OPTI82C611A", &opti82c611a_port_ops, 0x0F, + {"OPTI82C611A", &opti82c611a_port_ops, ATA_PIO3, 0, 0, NULL }, - {"OPTI82C46X", &opti82c46x_port_ops, 0x0F, + {"OPTI82C46X", &opti82c46x_port_ops, ATA_PIO3, 0, 0, NULL }, - {"QDI6500", &qdi6500_port_ops, 0x07, + {"QDI6500", &qdi6500_port_ops, ATA_PIO2, ATA_FLAG_NO_IORDY, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, - {"QDI6580", &qdi6580_port_ops, 0x1F, + {"QDI6580", &qdi6580_port_ops, ATA_PIO4, 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, - {"QDI6580DP", &qdi6580dp_port_ops, 0x1F, + {"QDI6580DP", &qdi6580dp_port_ops, ATA_PIO4, 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, - {"W83759A", &winbond_port_ops, 0x1F, + {"W83759A", &winbond_port_ops, ATA_PIO4, 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, winbond_port } }; @@ -1022,6 +975,7 @@ static __init int legacy_init_one(struct legacy_probe *probe) ctrl_addr = devm_ioport_map(&pdev->dev, io + 0x0206, 1); if (!io_addr || !ctrl_addr) goto fail; + ld->type = probe->type; if (controller->setup) if (controller->setup(pdev, probe, ld) < 0) goto fail; @@ -1306,6 +1260,7 @@ MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("low-level driver for legacy ATA"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); +MODULE_ALIAS("pata_qdi"); MODULE_ALIAS("pata_winbond"); module_param(probe_all, int, 0); diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index 2fcac51..3e17463 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -780,7 +780,7 @@ mpc52xx_ata_probe(struct platform_device *op) } task_irq = bcom_get_task_irq(dmatsk); - ret = request_irq(task_irq, &mpc52xx_ata_task_irq, IRQF_DISABLED, + ret = request_irq(task_irq, &mpc52xx_ata_task_irq, 0, "ATA task", priv); if (ret) { dev_err(&op->dev, "error requesting DMA IRQ\n"); diff --git a/drivers/ata/pata_of_platform.c b/drivers/ata/pata_of_platform.c index f305400..a72ab0d 100644 --- a/drivers/ata/pata_of_platform.c +++ b/drivers/ata/pata_of_platform.c @@ -11,6 +11,8 @@ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/ata_platform.h> @@ -57,11 +59,11 @@ static int __devinit pata_of_platform_probe(struct platform_device *ofdev) prop = of_get_property(dn, "reg-shift", NULL); if (prop) - reg_shift = *prop; + reg_shift = be32_to_cpup(prop); prop = of_get_property(dn, "pio-mode", NULL); if (prop) { - pio_mode = *prop; + pio_mode = be32_to_cpup(prop); if (pio_mode > 6) { dev_err(&ofdev->dev, "invalid pio-mode\n"); return -EINVAL; diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index b1511f3..7d63f24 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -63,6 +63,7 @@ enum { }; static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static int pdc2027x_reinit_one(struct pci_dev *pdev); static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline); static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev); static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev); @@ -126,6 +127,10 @@ static struct pci_driver pdc2027x_pci_driver = { .id_table = pdc2027x_pci_tbl, .probe = pdc2027x_init_one, .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = ata_pci_device_suspend, + .resume = pdc2027x_reinit_one, +#endif }; static struct scsi_host_template pdc2027x_sht = { @@ -754,6 +759,31 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de IRQF_SHARED, &pdc2027x_sht); } +#ifdef CONFIG_PM +static int pdc2027x_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + unsigned int board_idx; + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + if (pdev->device == PCI_DEVICE_ID_PROMISE_20268 || + pdev->device == PCI_DEVICE_ID_PROMISE_20270) + board_idx = PDC_UDMA_100; + else + board_idx = PDC_UDMA_133; + + if (pdc_hardware_init(host, board_idx)) + return -EIO; + + ata_host_resume(host); + return 0; +} +#endif + /** * pdc2027x_init - Called after this module is loaded into the kernel. */ diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c deleted file mode 100644 index 45879dc..0000000 --- a/drivers/ata/pata_qdi.c +++ /dev/null @@ -1,366 +0,0 @@ -/* - * pata_qdi.c - QDI VLB ATA controllers - * (C) 2006 Red Hat - * - * This driver mostly exists as a proof of concept for non PCI devices under - * libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly - * useful. - * - * Tuning code written from the documentation at - * http://www.ryston.cz/petr/vlb/qd6500.html - * http://www.ryston.cz/petr/vlb/qd6580.html - * - * Probe code based on drivers/ide/legacy/qd65xx.c - * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by - * Samuel Thibault <samuel.thibault@ens-lyon.org> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <scsi/scsi_host.h> -#include <linux/libata.h> -#include <linux/platform_device.h> - -#define DRV_NAME "pata_qdi" -#define DRV_VERSION "0.3.1" - -#define NR_HOST 4 /* Two 6580s */ - -struct qdi_data { - unsigned long timing; - u8 clock[2]; - u8 last; - int fast; - struct platform_device *platform_dev; - -}; - -static struct ata_host *qdi_host[NR_HOST]; -static struct qdi_data qdi_data[NR_HOST]; -static int nr_qdi_host; - -#ifdef MODULE -static int probe_qdi = 1; -#else -static int probe_qdi; -#endif - -static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev) -{ - struct ata_timing t; - struct qdi_data *qdi = ap->host->private_data; - int active, recovery; - u8 timing; - - /* Get the timing data in cycles */ - ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); - - if (qdi->fast) { - active = 8 - clamp_val(t.active, 1, 8); - recovery = 18 - clamp_val(t.recover, 3, 18); - } else { - active = 9 - clamp_val(t.active, 2, 9); - recovery = 15 - clamp_val(t.recover, 0, 15); - } - timing = (recovery << 4) | active | 0x08; - - qdi->clock[adev->devno] = timing; - - outb(timing, qdi->timing); -} - -static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev) -{ - struct ata_timing t; - struct qdi_data *qdi = ap->host->private_data; - int active, recovery; - u8 timing; - - /* Get the timing data in cycles */ - ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); - - if (qdi->fast) { - active = 8 - clamp_val(t.active, 1, 8); - recovery = 18 - clamp_val(t.recover, 3, 18); - } else { - active = 9 - clamp_val(t.active, 2, 9); - recovery = 15 - clamp_val(t.recover, 0, 15); - } - timing = (recovery << 4) | active | 0x08; - - qdi->clock[adev->devno] = timing; - - outb(timing, qdi->timing); - - /* Clear the FIFO */ - if (adev->class != ATA_DEV_ATA) - outb(0x5F, (qdi->timing & 0xFFF0) + 3); -} - -/** - * qdi_qc_issue - command issue - * @qc: command pending - * - * Called when the libata layer is about to issue a command. We wrap - * this interface so that we can load the correct ATA timings. - */ - -static unsigned int qdi_qc_issue(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct ata_device *adev = qc->dev; - struct qdi_data *qdi = ap->host->private_data; - - if (qdi->clock[adev->devno] != qdi->last) { - if (adev->pio_mode) { - qdi->last = qdi->clock[adev->devno]; - outb(qdi->clock[adev->devno], qdi->timing); - } - } - return ata_sff_qc_issue(qc); -} - -static unsigned int qdi_data_xfer(struct ata_device *dev, unsigned char *buf, - unsigned int buflen, int rw) -{ - if (ata_id_has_dword_io(dev->id)) { - struct ata_port *ap = dev->link->ap; - int slop = buflen & 3; - - if (rw == READ) - ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); - else - iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); - - if (unlikely(slop)) { - __le32 pad; - if (rw == READ) { - pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); - memcpy(buf + buflen - slop, &pad, slop); - } else { - memcpy(&pad, buf + buflen - slop, slop); - iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); - } - buflen += 4 - slop; - } - } else - buflen = ata_sff_data_xfer(dev, buf, buflen, rw); - - return buflen; -} - -static struct scsi_host_template qdi_sht = { - ATA_PIO_SHT(DRV_NAME), -}; - -static struct ata_port_operations qdi6500_port_ops = { - .inherits = &ata_sff_port_ops, - .qc_issue = qdi_qc_issue, - .sff_data_xfer = qdi_data_xfer, - .cable_detect = ata_cable_40wire, - .set_piomode = qdi6500_set_piomode, -}; - -static struct ata_port_operations qdi6580_port_ops = { - .inherits = &qdi6500_port_ops, - .set_piomode = qdi6580_set_piomode, -}; - -/** - * qdi_init_one - attach a qdi interface - * @type: Type to display - * @io: I/O port start - * @irq: interrupt line - * @fast: True if on a > 33Mhz VLB - * - * Register an ISA bus IDE interface. Such interfaces are PIO and we - * assume do not support IRQ sharing. - */ - -static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast) -{ - unsigned long ctl = io + 0x206; - struct platform_device *pdev; - struct ata_host *host; - struct ata_port *ap; - void __iomem *io_addr, *ctl_addr; - int ret; - - /* - * Fill in a probe structure first of all - */ - - pdev = platform_device_register_simple(DRV_NAME, nr_qdi_host, NULL, 0); - if (IS_ERR(pdev)) - return PTR_ERR(pdev); - - ret = -ENOMEM; - io_addr = devm_ioport_map(&pdev->dev, io, 8); - ctl_addr = devm_ioport_map(&pdev->dev, ctl, 1); - if (!io_addr || !ctl_addr) - goto fail; - - ret = -ENOMEM; - host = ata_host_alloc(&pdev->dev, 1); - if (!host) - goto fail; - ap = host->ports[0]; - - if (type == 6580) { - ap->ops = &qdi6580_port_ops; - ap->pio_mask = ATA_PIO4; - ap->flags |= ATA_FLAG_SLAVE_POSS; - } else { - ap->ops = &qdi6500_port_ops; - ap->pio_mask = ATA_PIO2; /* Actually PIO3 !IORDY is possible */ - ap->flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY; - } - - ap->ioaddr.cmd_addr = io_addr; - ap->ioaddr.altstatus_addr = ctl_addr; - ap->ioaddr.ctl_addr = ctl_addr; - ata_sff_std_ports(&ap->ioaddr); - - ata_port_desc(ap, "cmd %lx ctl %lx", io, ctl); - - /* - * Hook in a private data structure per channel - */ - ap->private_data = &qdi_data[nr_qdi_host]; - - qdi_data[nr_qdi_host].timing = port; - qdi_data[nr_qdi_host].fast = fast; - qdi_data[nr_qdi_host].platform_dev = pdev; - - printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io); - - /* activate */ - ret = ata_host_activate(host, irq, ata_sff_interrupt, 0, &qdi_sht); - if (ret) - goto fail; - - qdi_host[nr_qdi_host++] = dev_get_drvdata(&pdev->dev); - return 0; - - fail: - platform_device_unregister(pdev); - return ret; -} - -/** - * qdi_init - attach qdi interfaces - * - * Attach qdi IDE interfaces by scanning the ports it may occupy. - */ - -static __init int qdi_init(void) -{ - unsigned long flags; - static const unsigned long qd_port[2] = { 0x30, 0xB0 }; - static const unsigned long ide_port[2] = { 0x170, 0x1F0 }; - static const int ide_irq[2] = { 14, 15 }; - - int ct = 0; - int i; - - if (probe_qdi == 0) - return -ENODEV; - - /* - * Check each possible QD65xx base address - */ - - for (i = 0; i < 2; i++) { - unsigned long port = qd_port[i]; - u8 r, res; - - - if (request_region(port, 2, "pata_qdi")) { - /* Check for a card */ - local_irq_save(flags); - r = inb_p(port); - outb_p(0x19, port); - res = inb_p(port); - outb_p(r, port); - local_irq_restore(flags); - - /* Fail */ - if (res == 0x19) - { - release_region(port, 2); - continue; - } - - /* Passes the presence test */ - r = inb_p(port + 1); /* Check port agrees with port set */ - if ((r & 2) >> 1 != i) { - release_region(port, 2); - continue; - } - - /* Check card type */ - if ((r & 0xF0) == 0xC0) { - /* QD6500: single channel */ - if (r & 8) { - /* Disabled ? */ - release_region(port, 2); - continue; - } - if (qdi_init_one(port, 6500, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04) == 0) - ct++; - } - if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) { - /* QD6580: dual channel */ - if (!request_region(port + 2 , 2, "pata_qdi")) - { - release_region(port, 2); - continue; - } - res = inb(port + 3); - if (res & 1) { - /* Single channel mode */ - if (qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04) == 0) - ct++; - } else { - /* Dual channel mode */ - if (qdi_init_one(port, 6580, 0x1F0, 14, r & 0x04) == 0) - ct++; - if (qdi_init_one(port + 2, 6580, 0x170, 15, r & 0x04) == 0) - ct++; - } - } - } - } - if (ct != 0) - return 0; - return -ENODEV; -} - -static __exit void qdi_exit(void) -{ - int i; - - for (i = 0; i < nr_qdi_host; i++) { - ata_host_detach(qdi_host[i]); - /* Free the control resource. The 6580 dual channel has the resources - * claimed as a pair of 2 byte resources so we need no special cases... - */ - release_region(qdi_data[i].timing, 2); - platform_device_unregister(qdi_data[i].platform_dev); - } -} - -MODULE_AUTHOR("Alan Cox"); -MODULE_DESCRIPTION("low-level driver for qdi ATA"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); - -module_init(qdi_init); -module_exit(qdi_exit); - -module_param(probe_qdi, int, 0); - diff --git a/drivers/ata/pata_rdc.c b/drivers/ata/pata_rdc.c index 4d318f8..e6a2dd7 100644 --- a/drivers/ata/pata_rdc.c +++ b/drivers/ata/pata_rdc.c @@ -86,6 +86,8 @@ static int rdc_pata_prereset(struct ata_link *link, unsigned long deadline) return ata_sff_prereset(link, deadline); } +static DEFINE_SPINLOCK(rdc_lock); + /** * rdc_set_piomode - Initialize host controller PATA PIO timings * @ap: Port whose timings we are configuring @@ -101,6 +103,7 @@ static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev) { unsigned int pio = adev->pio_mode - XFER_PIO_0; struct pci_dev *dev = to_pci_dev(ap->host->dev); + unsigned long flags; unsigned int is_slave = (adev->devno != 0); unsigned int master_port= ap->port_no ? 0x42 : 0x40; unsigned int slave_port = 0x44; @@ -124,6 +127,8 @@ static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev) if (adev->class == ATA_DEV_ATA) control |= 4; /* PPE enable */ + spin_lock_irqsave(&rdc_lock, flags); + /* PIO configuration clears DTE unconditionally. It will be * programmed in set_dmamode which is guaranteed to be called * after set_piomode if any DMA mode is available. @@ -161,6 +166,8 @@ static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev) pci_read_config_byte(dev, 0x48, &udma_enable); udma_enable &= ~(1 << (2 * ap->port_no + adev->devno)); pci_write_config_byte(dev, 0x48, udma_enable); + + spin_unlock_irqrestore(&rdc_lock, flags); } /** @@ -177,6 +184,7 @@ static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev) static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *dev = to_pci_dev(ap->host->dev); + unsigned long flags; u8 master_port = ap->port_no ? 0x42 : 0x40; u16 master_data; u8 speed = adev->dma_mode; @@ -190,6 +198,8 @@ static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev) { 2, 1 }, { 2, 3 }, }; + spin_lock_irqsave(&rdc_lock, flags); + pci_read_config_word(dev, master_port, &master_data); pci_read_config_byte(dev, 0x48, &udma_enable); @@ -271,6 +281,8 @@ static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev) pci_write_config_word(dev, master_port, master_data); } pci_write_config_byte(dev, 0x48, udma_enable); + + spin_unlock_irqrestore(&rdc_lock, flags); } static struct ata_port_operations rdc_pata_ops = { @@ -375,6 +387,10 @@ static struct pci_driver rdc_pci_driver = { .id_table = rdc_pci_tbl, .probe = rdc_init_one, .remove = rdc_remove_one, +#ifdef CONFIG_PM + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif }; diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index e2c1825..c0e603a 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -38,7 +38,7 @@ #include <scsi/scsi_host.h> #include <linux/libata.h> -#define DRV_NAME "sc1200" +#define DRV_NAME "pata_sc1200" #define DRV_VERSION "0.2.6" #define SC1200_REV_A 0x00 @@ -86,10 +86,14 @@ static int sc1200_clock(void) static void sc1200_set_piomode(struct ata_port *ap, struct ata_device *adev) { static const u32 pio_timings[4][5] = { - {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, // format0 33Mhz - {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}, // format1, 33Mhz - {0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021}, // format1, 48Mhz - {0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131} // format1, 66Mhz + /* format0, 33Mhz */ + { 0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010 }, + /* format1, 33Mhz */ + { 0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010 }, + /* format1, 48Mhz */ + { 0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021 }, + /* format1, 66Mhz */ + { 0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131 } }; struct pci_dev *pdev = to_pci_dev(ap->host->dev); diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index eb748e3..e265f83 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -826,18 +826,6 @@ static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf, } /** - * scc_pata_prereset - prepare for reset - * @ap: ATA port to be reset - * @deadline: deadline jiffies for the operation - */ - -static int scc_pata_prereset(struct ata_link *link, unsigned long deadline) -{ - link->ap->cbl = ATA_CBL_PATA80; - return ata_sff_prereset(link, deadline); -} - -/** * scc_postreset - standard postreset callback * @ap: the target ata_port * @classes: classes of attached devices @@ -946,7 +934,7 @@ static struct ata_port_operations scc_pata_ops = { .bmdma_status = scc_bmdma_status, .sff_data_xfer = scc_data_xfer, - .prereset = scc_pata_prereset, + .cable_detect = ata_cable_80wire, .softreset = scc_softreset, .postreset = scc_postreset, diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index 86dd714..71eaf38 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -58,31 +58,15 @@ static const char *csb_bad_ata100[] = { }; /** - * dell_cable - Dell serverworks cable detection + * oem_cable - Dell/Sun serverworks cable detection * @ap: ATA port to do cable detect * - * Dell hide the 40/80 pin select for their interfaces in the top two - * bits of the subsystem ID. + * Dell PowerEdge and Sun Cobalt 'Alpine' hide the 40/80 pin select + * for their interfaces in the top two bits of the subsystem ID. */ -static int dell_cable(struct ata_port *ap) { - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - - if (pdev->subsystem_device & (1 << (ap->port_no + 14))) - return ATA_CBL_PATA80; - return ATA_CBL_PATA40; -} - -/** - * sun_cable - Sun Cobalt 'Alpine' cable detection - * @ap: ATA port to do cable select - * - * Cobalt CSB5 IDE hides the 40/80pin in the top two bits of the - * subsystem ID the same as dell. We could use one function but we may - * need to extend the Dell one in future - */ - -static int sun_cable(struct ata_port *ap) { +static int oem_cable(struct ata_port *ap) +{ struct pci_dev *pdev = to_pci_dev(ap->host->dev); if (pdev->subsystem_device & (1 << (ap->port_no + 14))) @@ -90,49 +74,21 @@ static int sun_cable(struct ata_port *ap) { return ATA_CBL_PATA40; } -/** - * osb4_cable - OSB4 cable detect - * @ap: ATA port to check - * - * The OSB4 isn't UDMA66 capable so this is easy - */ - -static int osb4_cable(struct ata_port *ap) { - return ATA_CBL_PATA40; -} - -/** - * csb_cable - CSB5/6 cable detect - * @ap: ATA port to check - * - * Serverworks default arrangement is to use the drive side detection - * only. - */ - -static int csb_cable(struct ata_port *ap) { - return ATA_CBL_PATA_UNK; -} - struct sv_cable_table { int device; int subvendor; int (*cable_detect)(struct ata_port *ap); }; -/* - * Note that we don't copy the old serverworks code because the old - * code contains obvious mistakes - */ - static struct sv_cable_table cable_detect[] = { - { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, dell_cable }, - { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, dell_cable }, - { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN, sun_cable }, - { PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, osb4_cable }, - { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, csb_cable }, - { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, csb_cable }, - { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, csb_cable }, - { PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, csb_cable }, + { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, oem_cable }, + { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, oem_cable }, + { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN, oem_cable }, + { PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, ata_cable_40wire }, + { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, ata_cable_unknown }, + { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, ata_cable_unknown }, + { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, ata_cable_unknown }, + { PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, ata_cable_unknown }, { } }; @@ -393,6 +349,31 @@ static void serverworks_fixup_ht1000(struct pci_dev *pdev) pci_write_config_byte(pdev, 0x5A, btr); } +static int serverworks_fixup(struct pci_dev *pdev) +{ + int rc = 0; + + /* Force master latency timer to 64 PCI clocks */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40); + + switch (pdev->device) { + case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE: + rc = serverworks_fixup_osb4(pdev); + break; + case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE: + ata_pci_bmdma_clear_simplex(pdev); + /* fall through */ + case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE: + case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2: + rc = serverworks_fixup_csb(pdev); + break; + case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE: + serverworks_fixup_ht1000(pdev); + break; + } + + return rc; +} static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { @@ -430,13 +411,12 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id if (rc) return rc; - /* Force master latency timer to 64 PCI clocks */ - pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40); + rc = serverworks_fixup(pdev); /* OSB4 : South Bridge and IDE */ if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { /* Select non UDMA capable OSB4 if we can't do fixups */ - if ( serverworks_fixup_osb4(pdev) < 0) + if (rc < 0) ppi[0] = &info[1]; } /* setup CSB5/CSB6 : South Bridge and IDE option RAID */ @@ -446,19 +426,13 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id /* If the returned btr is the newer revision then select the right info block */ - if (serverworks_fixup_csb(pdev) == 3) + if (rc == 3) ppi[0] = &info[3]; /* Is this the 3rd channel CSB6 IDE ? */ if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2) ppi[1] = &ata_dummy_port_info; } - /* setup HT1000E */ - else if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) - serverworks_fixup_ht1000(pdev); - - if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) - ata_pci_bmdma_clear_simplex(pdev); return ata_pci_bmdma_init_one(pdev, ppi, &serverworks_sht, NULL, 0); } @@ -473,24 +447,7 @@ static int serverworks_reinit_one(struct pci_dev *pdev) if (rc) return rc; - /* Force master latency timer to 64 PCI clocks */ - pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40); - - switch (pdev->device) { - case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE: - serverworks_fixup_osb4(pdev); - break; - case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE: - ata_pci_bmdma_clear_simplex(pdev); - /* fall through */ - case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE: - case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2: - serverworks_fixup_csb(pdev); - break; - case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE: - serverworks_fixup_ht1000(pdev); - break; - } + (void)serverworks_fixup(pdev); ata_host_resume(host); return 0; diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index 31f759b..b92eacf 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -38,11 +38,12 @@ /** * sil680_selreg - return register base - * @hwif: interface + * @ap: ATA interface * @r: config offset * - * Turn a config register offset into the right address in either - * PCI space or MMIO space to access the control register in question + * Turn a config register offset into the right address in PCI space + * to access the control register in question. + * * Thankfully this is a configuration operation so isn't performance * criticial. */ @@ -56,12 +57,12 @@ static unsigned long sil680_selreg(struct ata_port *ap, int r) /** * sil680_seldev - return register base - * @hwif: interface + * @ap: ATA interface * @r: config offset * - * Turn a config register offset into the right address in either - * PCI space or MMIO space to access the control register in question - * including accounting for the unit shift. + * Turn a config register offset into the right address in PCI space + * to access the control register in question including accounting for + * the unit shift. */ static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r) @@ -81,7 +82,8 @@ static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, * space for us. */ -static int sil680_cable_detect(struct ata_port *ap) { +static int sil680_cable_detect(struct ata_port *ap) +{ struct pci_dev *pdev = to_pci_dev(ap->host->dev); unsigned long addr = sil680_selreg(ap, 0); u8 ata66; @@ -93,7 +95,7 @@ static int sil680_cable_detect(struct ata_port *ap) { } /** - * sil680_set_piomode - set initial PIO mode data + * sil680_set_piomode - set PIO mode data * @ap: ATA interface * @adev: ATA device * @@ -104,8 +106,12 @@ static int sil680_cable_detect(struct ata_port *ap) { static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev) { - static u16 speed_p[5] = { 0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1 }; - static u16 speed_t[5] = { 0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1 }; + static const u16 speed_p[5] = { + 0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1 + }; + static const u16 speed_t[5] = { + 0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1 + }; unsigned long tfaddr = sil680_selreg(ap, 0x02); unsigned long addr = sil680_seldev(ap, adev, 0x04); @@ -140,22 +146,23 @@ static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev) } /** - * sil680_set_dmamode - set initial DMA mode data + * sil680_set_dmamode - set DMA mode data * @ap: ATA interface * @adev: ATA device * - * Program the MWDMA/UDMA modes for the sil680 k - * chipset. The MWDMA mode values are pulled from a lookup table + * Program the MWDMA/UDMA modes for the sil680 chipset. + * + * The MWDMA mode values are pulled from a lookup table * while the chipset uses mode number for UDMA. */ static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev) { - static u8 ultra_table[2][7] = { + static const u8 ultra_table[2][7] = { { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01, 0xFF }, /* 100MHz */ { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }, /* 133Mhz */ }; - static u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 }; + static const u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 }; struct pci_dev *pdev = to_pci_dev(ap->host->dev); unsigned long ma = sil680_seldev(ap, adev, 0x08); @@ -175,7 +182,7 @@ static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev) mode &= ~(0x03 << port_shift); /* Extract scsc */ - scsc = (scsc & 0x30) ? 1: 0; + scsc = (scsc & 0x30) ? 1 : 0; if (adev->dma_mode >= XFER_UDMA_0) { multi = 0x10C1; @@ -248,7 +255,7 @@ static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio) { u8 tmpbyte = 0; - /* FIXME: double check */ + /* FIXME: double check */ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, pdev->revision ? 1 : 255); @@ -266,22 +273,22 @@ static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio) *try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5); #endif - switch(tmpbyte & 0x30) { - case 0x00: - /* 133 clock attempt to force it on */ - pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10); - break; - case 0x30: - /* if clocking is disabled */ - /* 133 clock attempt to force it on */ - pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20); - break; - case 0x10: - /* 133 already */ - break; - case 0x20: - /* BIOS set PCI x2 clocking */ - break; + switch (tmpbyte & 0x30) { + case 0x00: + /* 133 clock attempt to force it on */ + pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10); + break; + case 0x30: + /* if clocking is disabled */ + /* 133 clock attempt to force it on */ + pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20); + break; + case 0x10: + /* 133 already */ + break; + case 0x20: + /* BIOS set PCI x2 clocking */ + break; } pci_read_config_byte(pdev, 0x8A, &tmpbyte); @@ -299,12 +306,19 @@ static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio) pci_write_config_dword(pdev, 0xB8, 0x43924392); pci_write_config_dword(pdev, 0xBC, 0x40094009); - switch(tmpbyte & 0x30) { - case 0x00: printk(KERN_INFO "sil680: 100MHz clock.\n");break; - case 0x10: printk(KERN_INFO "sil680: 133MHz clock.\n");break; - case 0x20: printk(KERN_INFO "sil680: Using PCI clock.\n");break; - /* This last case is _NOT_ ok */ - case 0x30: printk(KERN_ERR "sil680: Clock disabled ?\n"); + switch (tmpbyte & 0x30) { + case 0x00: + printk(KERN_INFO "sil680: 100MHz clock.\n"); + break; + case 0x10: + printk(KERN_INFO "sil680: 133MHz clock.\n"); + break; + case 0x20: + printk(KERN_INFO "sil680: Using PCI clock.\n"); + break; + /* This last case is _NOT_ ok */ + case 0x30: + printk(KERN_ERR "sil680: Clock disabled ?\n"); } return tmpbyte & 0x30; } diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 533f2ae..b0edc7d 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -55,7 +55,7 @@ static const struct sis_laptop sis_laptop[] = { /* devid, subvendor, subdev */ { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ { 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */ - { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */ + { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */ /* end marker */ { 0, } }; @@ -76,7 +76,7 @@ static int sis_short_ata40(struct pci_dev *dev) } /** - * sis_old_port_base - return PCI configuration base for dev + * sis_old_port_base - return PCI configuration base for dev * @adev: device * * Returns the base of the PCI configuration registers for this port @@ -85,11 +85,34 @@ static int sis_short_ata40(struct pci_dev *dev) static int sis_old_port_base(struct ata_device *adev) { - return 0x40 + (4 * adev->link->ap->port_no) + (2 * adev->devno); + return 0x40 + (4 * adev->link->ap->port_no) + (2 * adev->devno); } /** - * sis_133_cable_detect - check for 40/80 pin + * sis_port_base - return PCI configuration base for dev + * @adev: device + * + * Returns the base of the PCI configuration registers for this port + * number. + */ + +static int sis_port_base(struct ata_device *adev) +{ + struct ata_port *ap = adev->link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = 0x40; + u32 reg54; + + /* If bit 30 is set then the registers are mapped at 0x70 not 0x40 */ + pci_read_config_dword(pdev, 0x54, ®54); + if (reg54 & 0x40000000) + port = 0x70; + + return port + (8 * ap->port_no) + (4 * adev->devno); +} + +/** + * sis_133_cable_detect - check for 40/80 pin * @ap: Port * @deadline: deadline jiffies for the operation * @@ -110,7 +133,7 @@ static int sis_133_cable_detect(struct ata_port *ap) } /** - * sis_66_cable_detect - check for 40/80 pin + * sis_66_cable_detect - check for 40/80 pin * @ap: Port * * Perform cable detection on the UDMA66, UDMA100 and early UDMA133 @@ -132,7 +155,7 @@ static int sis_66_cable_detect(struct ata_port *ap) /** - * sis_pre_reset - probe begin + * sis_pre_reset - probe begin * @link: ATA link * @deadline: deadline jiffies for the operation * @@ -160,7 +183,7 @@ static int sis_pre_reset(struct ata_link *link, unsigned long deadline) /** - * sis_set_fifo - Set RWP fifo bits for this device + * sis_set_fifo - Set RWP fifo bits for this device * @ap: Port * @adev: Device * @@ -203,13 +226,13 @@ static void sis_set_fifo(struct ata_port *ap, struct ata_device *adev) static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev) { - struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); int port = sis_old_port_base(adev); u8 t1, t2; int speed = adev->pio_mode - XFER_PIO_0; - const u8 active[] = { 0x00, 0x07, 0x04, 0x03, 0x01 }; - const u8 recovery[] = { 0x00, 0x06, 0x04, 0x03, 0x03 }; + static const u8 active[] = { 0x00, 0x07, 0x04, 0x03, 0x01 }; + static const u8 recovery[] = { 0x00, 0x06, 0x04, 0x03, 0x03 }; sis_set_fifo(ap, adev); @@ -240,11 +263,11 @@ static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev) static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev) { - struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); int port = sis_old_port_base(adev); int speed = adev->pio_mode - XFER_PIO_0; - const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 }; + static const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 }; sis_set_fifo(ap, adev); @@ -265,20 +288,19 @@ static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev) static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev) { - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - int port = 0x40; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port; u32 t1; - u32 reg54; int speed = adev->pio_mode - XFER_PIO_0; - const u32 timing133[] = { + static const u32 timing133[] = { 0x28269000, /* Recovery << 24 | Act << 16 | Ini << 12 */ 0x0C266000, 0x04263000, 0x0C0A3000, 0x05093000 }; - const u32 timing100[] = { + static const u32 timing100[] = { 0x1E1C6000, /* Recovery << 24 | Act << 16 | Ini << 12 */ 0x091C4000, 0x031C2000, @@ -288,12 +310,7 @@ static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev) sis_set_fifo(ap, adev); - /* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */ - pci_read_config_dword(pdev, 0x54, ®54); - if (reg54 & 0x40000000) - port = 0x70; - port += 8 * ap->port_no + 4 * adev->devno; - + port = sis_port_base(adev); pci_read_config_dword(pdev, port, &t1); t1 &= 0xC0C00FFF; /* Mask out timing */ @@ -319,13 +336,13 @@ static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev) static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev) { - struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); int speed = adev->dma_mode - XFER_MW_DMA_0; int drive_pci = sis_old_port_base(adev); u16 timing; - const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 }; - const u16 udma_bits[] = { 0xE000, 0xC000, 0xA000 }; + static const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 }; + static const u16 udma_bits[] = { 0xE000, 0xC000, 0xA000 }; pci_read_config_word(pdev, drive_pci, &timing); @@ -358,14 +375,14 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev) static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev) { - struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); int speed = adev->dma_mode - XFER_MW_DMA_0; int drive_pci = sis_old_port_base(adev); u16 timing; /* MWDMA 0-2 and UDMA 0-5 */ - const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 }; - const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 }; + static const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 }; + static const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 }; pci_read_config_word(pdev, drive_pci, &timing); @@ -397,12 +414,12 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev) static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev) { - struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); int speed = adev->dma_mode - XFER_MW_DMA_0; int drive_pci = sis_old_port_base(adev); u8 timing; - const u8 udma_bits[] = { 0x8B, 0x87, 0x85, 0x83, 0x82, 0x81}; + static const u8 udma_bits[] = { 0x8B, 0x87, 0x85, 0x83, 0x82, 0x81}; pci_read_config_byte(pdev, drive_pci + 1, &timing); @@ -431,7 +448,7 @@ static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev) static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *adev) { - struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); int speed = adev->dma_mode - XFER_MW_DMA_0; int drive_pci = sis_old_port_base(adev); u8 timing; @@ -464,32 +481,34 @@ static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *a static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev) { - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - int speed = adev->dma_mode - XFER_MW_DMA_0; - int port = 0x40; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port; u32 t1; - u32 reg54; - - /* bits 4- cycle time 8 - cvs time */ - static const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 }; - static const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 }; - - /* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */ - pci_read_config_dword(pdev, 0x54, ®54); - if (reg54 & 0x40000000) - port = 0x70; - port += (8 * ap->port_no) + (4 * adev->devno); + port = sis_port_base(adev); pci_read_config_dword(pdev, port, &t1); if (adev->dma_mode < XFER_UDMA_0) { + /* Recovery << 24 | Act << 16 | Ini << 12, like PIO modes */ + static const u32 timing_u100[] = { 0x19154000, 0x06072000, 0x04062000 }; + static const u32 timing_u133[] = { 0x221C6000, 0x0C0A3000, 0x05093000 }; + int speed = adev->dma_mode - XFER_MW_DMA_0; + + t1 &= 0xC0C00FFF; + /* disable UDMA */ t1 &= ~0x00000004; - /* FIXME: need data sheet to add MWDMA here. Also lacking on - ide/pci driver */ + if (t1 & 0x08) + t1 |= timing_u133[speed]; + else + t1 |= timing_u100[speed]; } else { - speed = adev->dma_mode - XFER_UDMA_0; - /* if & 8 no UDMA133 - need info for ... */ + /* bits 4- cycle time 8 - cvs time */ + static const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 }; + static const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 }; + int speed = adev->dma_mode - XFER_UDMA_0; + t1 &= ~0x00000FF0; + /* enable UDMA */ t1 |= 0x00000004; if (t1 & 0x08) t1 |= timing_u133[speed]; @@ -499,6 +518,27 @@ static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev) pci_write_config_dword(pdev, port, t1); } +/** + * sis_133_mode_filter - mode selection filter + * @adev: ATA device + * + * Block UDMA6 on devices that do not support it. + */ + +static unsigned long sis_133_mode_filter(struct ata_device *adev, unsigned long mask) +{ + struct ata_port *ap = adev->link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = sis_port_base(adev); + u32 t1; + + pci_read_config_dword(pdev, port, &t1); + /* if ATA133 is disabled, mask it out */ + if (!(t1 & 0x08)) + mask &= ~(0xC0 << ATA_SHIFT_UDMA); + return mask; +} + static struct scsi_host_template sis_sht = { ATA_BMDMA_SHT(DRV_NAME), }; @@ -520,6 +560,7 @@ static struct ata_port_operations sis_133_ops = { .set_piomode = sis_133_set_piomode, .set_dmamode = sis_133_set_dmamode, .cable_detect = sis_133_cable_detect, + .mode_filter = sis_133_mode_filter, }; static struct ata_port_operations sis_133_early_ops = { @@ -588,7 +629,7 @@ static const struct ata_port_info sis_info100_early = { static const struct ata_port_info sis_info133 = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, - /* No MWDMA */ + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &sis_133_ops, }; @@ -669,7 +710,7 @@ static void sis_fixup(struct pci_dev *pdev, struct sis_chipset *sis) * @pdev: PCI device to register * @ent: Entry in sis_pci_tbl matching with @pdev * - * Called from kernel PCI layer. We probe for combined mode (sigh), + * Called from kernel PCI layer. We probe for combined mode (sigh), * and then hand over control to libata, for it to do the rest. * * LOCKING: @@ -769,17 +810,20 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) switch(trueid) { case 0x5518: /* SIS 962/963 */ + dev_info(&pdev->dev, + "SiS 962/963 MuTIOL IDE UDMA133 controller\n"); chipset = &sis133; if ((idemisc & 0x40000000) == 0) { pci_write_config_dword(pdev, 0x54, idemisc | 0x40000000); - printk(KERN_INFO "SIS5513: Switching to 5513 register mapping\n"); + dev_info(&pdev->dev, + "Switching to 5513 register mapping\n"); } break; case 0x0180: /* SIS 965/965L */ - chipset = &sis133; + chipset = &sis133; break; case 0x1180: /* SIS 966/966L */ - chipset = &sis133; + chipset = &sis133; break; } } diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index c06ce8c..24cf200 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -1,6 +1,7 @@ /* * pata_sl82c105.c - SL82C105 PATA for new ATA layer * (C) 2005 Red Hat Inc + * (C) 2011 Bartlomiej Zolnierkiewicz * * Based in part on linux/drivers/ide/pci/sl82c105.c * SL82C105/Winbond 553 IDE driver @@ -289,6 +290,14 @@ static int sl82c105_bridge_revision(struct pci_dev *pdev) return bridge->revision; } +static void sl82c105_fixup(struct pci_dev *pdev) +{ + u32 val; + + pci_read_config_dword(pdev, 0x40, &val); + val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; + pci_write_config_dword(pdev, 0x40, val); +} static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id) { @@ -306,7 +315,6 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id /* for now use only the first port */ const struct ata_port_info *ppi[] = { &info_early, NULL }; - u32 val; int rev; int rc; @@ -325,13 +333,28 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id else ppi[0] = &info_dma; - pci_read_config_dword(dev, 0x40, &val); - val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; - pci_write_config_dword(dev, 0x40, val); + sl82c105_fixup(dev); return ata_pci_bmdma_init_one(dev, ppi, &sl82c105_sht, NULL, 0); } +#ifdef CONFIG_PM +static int sl82c105_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + sl82c105_fixup(pdev); + + ata_host_resume(host); + return 0; +} +#endif + static const struct pci_device_id sl82c105[] = { { PCI_VDEVICE(WINBOND, PCI_DEVICE_ID_WINBOND_82C105), }, @@ -342,7 +365,11 @@ static struct pci_driver sl82c105_pci_driver = { .name = DRV_NAME, .id_table = sl82c105, .probe = sl82c105_init_one, - .remove = ata_pci_remove_one + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = ata_pci_device_suspend, + .resume = sl82c105_reinit_one, +#endif }; static int __init sl82c105_init(void) diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 8e9f504..255f336 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -509,6 +509,27 @@ static void via_config_fifo(struct pci_dev *pdev, unsigned int flags) } } +static void via_fixup(struct pci_dev *pdev, const struct via_isa_bridge *config) +{ + u32 timing; + + /* Initialise the FIFO for the enabled channels. */ + via_config_fifo(pdev, config->flags); + + if (config->udma_mask == ATA_UDMA4) { + /* The 66 MHz devices require we enable the clock */ + pci_read_config_dword(pdev, 0x50, &timing); + timing |= 0x80008; + pci_write_config_dword(pdev, 0x50, timing); + } + if (config->flags & VIA_BAD_CLK66) { + /* Disable the 66MHz clock on problem devices */ + pci_read_config_dword(pdev, 0x50, &timing); + timing &= ~0x80008; + pci_write_config_dword(pdev, 0x50, timing); + } +} + /** * via_init_one - discovery callback * @pdev: PCI device @@ -570,7 +591,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) struct pci_dev *isa; const struct via_isa_bridge *config; u8 enable; - u32 timing; unsigned long flags = id->driver_data; int rc; @@ -609,9 +629,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) return -ENODEV; } - /* Initialise the FIFO for the enabled channels. */ - via_config_fifo(pdev, config->flags); - /* Clock set up */ switch (config->udma_mask) { case 0x00: @@ -637,12 +654,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) return -ENODEV; } - if (config->flags & VIA_BAD_CLK66) { - /* Disable the 66MHz clock on problem devices */ - pci_read_config_dword(pdev, 0x50, &timing); - timing &= ~0x80008; - pci_write_config_dword(pdev, 0x50, timing); - } + via_fixup(pdev, config); /* We have established the device type, now fire it up */ return ata_pci_bmdma_init_one(pdev, ppi, &via_sht, (void *)config, 0); @@ -661,29 +673,14 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) static int via_reinit_one(struct pci_dev *pdev) { - u32 timing; struct ata_host *host = dev_get_drvdata(&pdev->dev); - const struct via_isa_bridge *config = host->private_data; int rc; rc = ata_pci_device_do_resume(pdev); if (rc) return rc; - via_config_fifo(pdev, config->flags); - - if (config->udma_mask == ATA_UDMA4) { - /* The 66 MHz devices require we enable the clock */ - pci_read_config_dword(pdev, 0x50, &timing); - timing |= 0x80008; - pci_write_config_dword(pdev, 0x50, timing); - } - if (config->flags & VIA_BAD_CLK66) { - /* Disable the 66MHz clock on problem devices */ - pci_read_config_dword(pdev, 0x50, &timing); - timing &= ~0x80008; - pci_write_config_dword(pdev, 0x50, timing); - } + via_fixup(pdev, host->private_data); ata_host_resume(host); return 0; diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 4b6b209..0b8b8b4 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -4087,8 +4087,11 @@ static int mv_platform_probe(struct platform_device *pdev) dev_info(&pdev->dev, "slots %u ports %d\n", (unsigned)MV_MAX_Q_DEPTH, host->n_ports); - return ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt, - IRQF_SHARED, &mv6_sht); + rc = ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt, + IRQF_SHARED, &mv6_sht); + if (!rc) + return 0; + err: #if defined(CONFIG_HAVE_CLK) if (!IS_ERR(hpriv->clk)) { @@ -4110,8 +4113,7 @@ err: */ static int __devexit mv_platform_remove(struct platform_device *pdev) { - struct device *dev = &pdev->dev; - struct ata_host *host = dev_get_drvdata(dev); + struct ata_host *host = platform_get_drvdata(pdev); #if defined(CONFIG_HAVE_CLK) struct mv_host_priv *hpriv = host->private_data; #endif @@ -4129,7 +4131,7 @@ static int __devexit mv_platform_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int mv_platform_suspend(struct platform_device *pdev, pm_message_t state) { - struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct ata_host *host = platform_get_drvdata(pdev); if (host) return ata_host_suspend(host, state); else @@ -4138,7 +4140,7 @@ static int mv_platform_suspend(struct platform_device *pdev, pm_message_t state) static int mv_platform_resume(struct platform_device *pdev) { - struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct ata_host *host = platform_get_drvdata(pdev); int ret; if (host) { @@ -4353,7 +4355,7 @@ static int mv_pci_init_one(struct pci_dev *pdev, #ifdef CONFIG_PM static int mv_pci_device_resume(struct pci_dev *pdev) { - struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct ata_host *host = pci_get_drvdata(pdev); int rc; rc = ata_pci_device_do_resume(pdev); diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 55470f3..1e91406 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -268,7 +268,7 @@ union sil24_cmd_block { struct sil24_atapi_block atapi; }; -static struct sil24_cerr_info { +static const struct sil24_cerr_info { unsigned int err_mask, action; const char *desc; } sil24_cerr_db[] = { @@ -1019,7 +1019,7 @@ static void sil24_error_intr(struct ata_port *ap) /* deal with command error */ if (irq_stat & PORT_IRQ_ERROR) { - struct sil24_cerr_info *ci = NULL; + const struct sil24_cerr_info *ci = NULL; unsigned int err_mask = 0, action = 0; u32 context, cerr; int pmp; |