diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/wireless/mwl8k.c | 104 |
1 files changed, 57 insertions, 47 deletions
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 19fe712..0ae56cb 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -127,20 +127,22 @@ struct mwl8k_tx_queue { }; struct mwl8k_priv { - void __iomem *sram; - void __iomem *regs; struct ieee80211_hw *hw; - struct pci_dev *pdev; struct mwl8k_device_info *device_info; - bool ap_fw; - struct rxd_ops *rxd_ops; - /* firmware files and meta data */ + void __iomem *sram; + void __iomem *regs; + + /* firmware */ struct firmware *fw_helper; struct firmware *fw_ucode; + /* hardware/firmware parameters */ + bool ap_fw; + struct rxd_ops *rxd_ops; + /* firmware access */ struct mutex fw_mutex; struct task_struct *fw_mutex_owner; @@ -547,7 +549,6 @@ static int mwl8k_load_firmware(struct ieee80211_hw *hw) { struct mwl8k_priv *priv = hw->priv; struct firmware *fw = priv->fw_ucode; - struct mwl8k_device_info *di = priv->device_info; int rc; int loops; @@ -579,7 +580,7 @@ static int mwl8k_load_firmware(struct ieee80211_hw *hw) return rc; } - if (di->modes & BIT(NL80211_IFTYPE_AP)) + if (priv->device_info->modes & BIT(NL80211_IFTYPE_AP)) iowrite32(MWL8K_MODE_AP, priv->regs + MWL8K_HIU_GEN_PTR); else iowrite32(MWL8K_MODE_STA, priv->regs + MWL8K_HIU_GEN_PTR); @@ -3300,6 +3301,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, printed_version = 1; } + rc = pci_enable_device(pdev); if (rc) { printk(KERN_ERR "%s: Cannot enable new PCI device\n", @@ -3316,6 +3318,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, pci_set_master(pdev); + hw = ieee80211_alloc_hw(sizeof(*priv), &mwl8k_ops); if (hw == NULL) { printk(KERN_ERR "%s: ieee80211 alloc failed\n", MWL8K_NAME); @@ -3323,17 +3326,14 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, goto err_free_reg; } + SET_IEEE80211_DEV(hw, &pdev->dev); + pci_set_drvdata(pdev, hw); + priv = hw->priv; priv->hw = hw; priv->pdev = pdev; priv->device_info = &mwl8k_info_tbl[id->driver_data]; - priv->rxd_ops = priv->device_info->rxd_ops; - priv->sniffer_enabled = false; - priv->wmm_enabled = false; - priv->pending_tx_pkts = 0; - SET_IEEE80211_DEV(hw, &pdev->dev); - pci_set_drvdata(pdev, hw); priv->sram = pci_iomap(pdev, 0, 0x10000); if (priv->sram == NULL) { @@ -3356,6 +3356,37 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, } } + + /* Reset firmware and hardware */ + mwl8k_hw_reset(priv); + + /* Ask userland hotplug daemon for the device firmware */ + rc = mwl8k_request_firmware(priv); + if (rc) { + printk(KERN_ERR "%s: Firmware files not found\n", + wiphy_name(hw->wiphy)); + goto err_stop_firmware; + } + + /* Load firmware into hardware */ + rc = mwl8k_load_firmware(hw); + if (rc) { + printk(KERN_ERR "%s: Cannot start firmware\n", + wiphy_name(hw->wiphy)); + goto err_stop_firmware; + } + + /* Reclaim memory once firmware is successfully loaded */ + mwl8k_release_firmware(priv); + + + priv->rxd_ops = priv->device_info->rxd_ops; + + priv->sniffer_enabled = false; + priv->wmm_enabled = false; + priv->pending_tx_pkts = 0; + + memcpy(priv->channels, mwl8k_channels, sizeof(mwl8k_channels)); priv->band.band = IEEE80211_BAND_2GHZ; priv->band.channels = priv->channels; @@ -3400,11 +3431,11 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, /* Power management cookie */ priv->cookie = pci_alloc_consistent(priv->pdev, 4, &priv->cookie_dma); if (priv->cookie == NULL) - goto err_iounmap; + goto err_stop_firmware; rc = mwl8k_rxq_init(hw, 0); if (rc) - goto err_iounmap; + goto err_free_cookie; rxq_refill(hw, 0, INT_MAX); mutex_init(&priv->fw_mutex); @@ -3435,28 +3466,6 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, goto err_free_queues; } - /* Reset firmware and hardware */ - mwl8k_hw_reset(priv); - - /* Ask userland hotplug daemon for the device firmware */ - rc = mwl8k_request_firmware(priv); - if (rc) { - printk(KERN_ERR "%s: Firmware files not found\n", - wiphy_name(hw->wiphy)); - goto err_free_irq; - } - - /* Load firmware into hardware */ - rc = mwl8k_load_firmware(hw); - if (rc) { - printk(KERN_ERR "%s: Cannot start firmware\n", - wiphy_name(hw->wiphy)); - goto err_stop_firmware; - } - - /* Reclaim memory once firmware is successfully loaded */ - mwl8k_release_firmware(priv); - /* * Temporarily enable interrupts. Initial firmware host * commands use interrupts and avoids polling. Disable @@ -3475,14 +3484,14 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, if (rc) { printk(KERN_ERR "%s: Cannot initialise firmware\n", wiphy_name(hw->wiphy)); - goto err_stop_firmware; + goto err_free_irq; } /* Turn radio off */ rc = mwl8k_cmd_radio_disable(hw); if (rc) { printk(KERN_ERR "%s: Cannot disable\n", wiphy_name(hw->wiphy)); - goto err_stop_firmware; + goto err_free_irq; } /* Clear MAC address */ @@ -3490,7 +3499,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, if (rc) { printk(KERN_ERR "%s: Cannot clear MAC address\n", wiphy_name(hw->wiphy)); - goto err_stop_firmware; + goto err_free_irq; } /* Disable interrupts */ @@ -3501,7 +3510,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, if (rc) { printk(KERN_ERR "%s: Cannot register device\n", wiphy_name(hw->wiphy)); - goto err_stop_firmware; + goto err_free_irq; } printk(KERN_INFO "%s: %s v%d, %pM, %s firmware %u.%u.%u.%u\n", @@ -3513,10 +3522,6 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, return 0; -err_stop_firmware: - mwl8k_hw_reset(priv); - mwl8k_release_firmware(priv); - err_free_irq: iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK); free_irq(priv->pdev->irq, hw); @@ -3526,11 +3531,16 @@ err_free_queues: mwl8k_txq_deinit(hw, i); mwl8k_rxq_deinit(hw, 0); -err_iounmap: +err_free_cookie: if (priv->cookie != NULL) pci_free_consistent(priv->pdev, 4, priv->cookie, priv->cookie_dma); +err_stop_firmware: + mwl8k_hw_reset(priv); + mwl8k_release_firmware(priv); + +err_iounmap: if (priv->regs != NULL) pci_iounmap(pdev, priv->regs); |