diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/media/video/cx18/cx18-ioctl.c | 20 | ||||
| -rw-r--r-- | drivers/media/video/cx18/cx18-streams.c | 79 |
2 files changed, 71 insertions, 28 deletions
diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index a454ede..0f0cd56 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -42,13 +42,6 @@ #include <media/v4l2-chip-ident.h> #include <linux/i2c-id.h> -static int cx18_vbi_streaming(struct cx18 *cx) -{ - struct cx18_stream *s_vbi = &cx->streams[CX18_ENC_STREAM_TYPE_VBI]; - return (s_vbi->handle != CX18_INVALID_TASK_HANDLE) && - test_bit(CX18_F_S_STREAMING, &s_vbi->s_flags); -} - u16 cx18_service2vbi(int type) { switch (type) { @@ -312,7 +305,11 @@ static int cx18_s_fmt_vbi_cap(struct file *file, void *fh, if (ret) return ret; - if (!cx18_raw_vbi(cx) && cx18_vbi_streaming(cx)) + /* + * Changing the Encoder's Raw VBI parameters won't have any effect + * if any analog capture is ongoing + */ + if (!cx18_raw_vbi(cx) && atomic_read(&cx->ana_capturing) > 0) return -EBUSY; /* @@ -345,8 +342,13 @@ static int cx18_s_fmt_sliced_vbi_cap(struct file *file, void *fh, cx18_try_fmt_sliced_vbi_cap(file, fh, fmt); - if (cx18_raw_vbi(cx) && cx18_vbi_streaming(cx)) + /* + * Changing the Encoder's Raw VBI parameters won't have any effect + * if any analog capture is ongoing + */ + if (cx18_raw_vbi(cx) && atomic_read(&cx->ana_capturing) > 0) return -EBUSY; + /* * Set the service_lines requested in the digitizer/slicer registers. * Note, cx18_av_vbi() wipes some "impossible" service lines in the diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index a89f7f8..f074fdb2 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -349,6 +349,14 @@ static void cx18_vbi_setup(struct cx18_stream *s) /* setup VBI registers */ cx18_av_cmd(cx, VIDIOC_S_FMT, &cx->vbi.in); + /* + * Send the CX18_CPU_SET_RAW_VBI_PARAM API command to setup Encoder Raw + * VBI when the first analog capture channel starts, as once it starts + * (e.g. MPEG), we can't effect any change in the Encoder Raw VBI setup + * (i.e. for the VBI capture channels). We also send it for each + * analog capture channel anyway just to make sure we get the proper + * behavior + */ if (raw) { lines = cx->vbi.count * 2; } else { @@ -410,8 +418,7 @@ static void cx18_vbi_setup(struct cx18_stream *s) CX18_DEBUG_INFO("Setup VBI h: %d lines %x bpl %d fr %d %x %x\n", data[0], data[1], data[2], data[3], data[4], data[5]); - if (s->type == CX18_ENC_STREAM_TYPE_VBI) - cx18_api(cx, CX18_CPU_SET_RAW_VBI_PARAM, 6, data); + cx18_api(cx, CX18_CPU_SET_RAW_VBI_PARAM, 6, data); } struct cx18_queue *cx18_stream_put_buf_fw(struct cx18_stream *s, @@ -460,8 +467,8 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) u32 data[MAX_MB_ARGUMENTS]; struct cx18 *cx = s->cx; struct cx18_buffer *buf; - int ts = 0; int captype = 0; + struct cx18_api_func_private priv; if (s->video_dev == NULL && s->dvb.enabled == 0) return -EINVAL; @@ -479,7 +486,6 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) case CX18_ENC_STREAM_TYPE_TS: captype = CAPTURE_CHANNEL_TYPE_TS; - ts = 1; break; case CX18_ENC_STREAM_TYPE_YUV: captype = CAPTURE_CHANNEL_TYPE_YUV; @@ -488,8 +494,16 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) captype = CAPTURE_CHANNEL_TYPE_PCM; break; case CX18_ENC_STREAM_TYPE_VBI: +#ifdef CX18_ENCODER_PARSES_SLICED captype = cx18_raw_vbi(cx) ? CAPTURE_CHANNEL_TYPE_VBI : CAPTURE_CHANNEL_TYPE_SLICED_VBI; +#else + /* + * Currently we set things up so that Sliced VBI from the + * digitizer is handled as Raw VBI by the encoder + */ + captype = CAPTURE_CHANNEL_TYPE_VBI; +#endif cx->vbi.frame = 0; cx->vbi.inserted_frame = 0; memset(cx->vbi.sliced_mpeg_size, @@ -499,10 +513,6 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) return -EINVAL; } - /* mute/unmute video */ - cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, - s->handle, !!test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)); - /* Clear Streamoff flags in case left from last capture */ clear_bit(CX18_F_S_STREAMOFF, &s->s_flags); @@ -510,31 +520,62 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) s->handle = data[0]; cx18_vapi(cx, CX18_CPU_SET_CHANNEL_TYPE, 2, s->handle, captype); - if (atomic_read(&cx->ana_capturing) == 0 && !ts) { - struct cx18_api_func_private priv; - - /* Stuff from Windows, we don't know what it is */ + /* + * For everything but CAPTURE_CHANNEL_TYPE_TS, play it safe and + * set up all the parameters, as it is not obvious which parameters the + * firmware shares across capture channel types and which it does not. + * + * Some of the cx18_vapi() calls below apply to only certain capture + * channel types. We're hoping there's no harm in calling most of them + * anyway, as long as the values are all consistent. Setting some + * shared parameters will have no effect once an analog capture channel + * has started streaming. + */ + if (captype != CAPTURE_CHANNEL_TYPE_TS) { cx18_vapi(cx, CX18_CPU_SET_VER_CROP_LINE, 2, s->handle, 0); cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 3, 1); cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 8, 0); cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 4, 1); - cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2, s->handle, 12); + /* + * Audio related reset according to + * Documentation/video4linux/cx2341x/fw-encoder-api.txt + */ + if (atomic_read(&cx->ana_capturing) == 0) + cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2, + s->handle, 12); + + /* + * Number of lines for Field 1 & Field 2 according to + * Documentation/video4linux/cx2341x/fw-encoder-api.txt + * FIXME - currently we set this to 0 & 0 but things seem OK + */ cx18_vapi(cx, CX18_CPU_SET_CAPTURE_LINE_NO, 3, - s->handle, cx->digitizer, cx->digitizer); + s->handle, cx->digitizer, cx->digitizer); - /* Setup VBI */ if (cx->v4l2_cap & V4L2_CAP_VBI_CAPTURE) cx18_vbi_setup(s); - /* assign program index info. - Mask 7: select I/P/B, Num_req: 400 max */ + /* + * assign program index info. + * Mask 7: select I/P/B, Num_req: 400 max + * FIXME - currently we have this hardcoded as disabled + */ cx18_vapi_result(cx, data, CX18_CPU_SET_INDEXTABLE, 1, 0); - /* Setup API for Stream */ + /* Call out to the common CX2341x API setup for user controls */ priv.cx = cx; priv.s = s; cx2341x_update(&priv, cx18_api_func, NULL, &cx->params); + + /* + * When starting a capture and we're set for radio, + * ensure the video is muted, despite the user control. + */ + if (!cx->params.video_mute && + test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) + cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle, + (cx->params.video_mute_yuv << 8) | 1); } if (atomic_read(&cx->tot_capturing) == 0) { @@ -578,7 +619,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) } /* you're live! sit back and await interrupts :) */ - if (!ts) + if (captype != CAPTURE_CHANNEL_TYPE_TS) atomic_inc(&cx->ana_capturing); atomic_inc(&cx->tot_capturing); return 0; |