diff options
Diffstat (limited to 'include/asm-arm/arch-ixp2000')
| -rw-r--r-- | include/asm-arm/arch-ixp2000/gpio.h | 31 | ||||
| -rw-r--r-- | include/asm-arm/arch-ixp2000/io.h | 112 | ||||
| -rw-r--r-- | include/asm-arm/arch-ixp2000/ixdp2x00.h | 4 | ||||
| -rw-r--r-- | include/asm-arm/arch-ixp2000/ixdp2x01.h | 4 | ||||
| -rw-r--r-- | include/asm-arm/arch-ixp2000/ixp2000-regs.h | 22 | ||||
| -rw-r--r-- | include/asm-arm/arch-ixp2000/platform.h | 22 | ||||
| -rw-r--r-- | include/asm-arm/arch-ixp2000/vmalloc.h | 2 |
7 files changed, 135 insertions, 62 deletions
diff --git a/include/asm-arm/arch-ixp2000/gpio.h b/include/asm-arm/arch-ixp2000/gpio.h index 84634af..03cbbe1 100644 --- a/include/asm-arm/arch-ixp2000/gpio.h +++ b/include/asm-arm/arch-ixp2000/gpio.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-ixp2000/ixp2000-gpio.h + * include/asm-arm/arch-ixp2000/gpio.h * * Copyright (C) 2002 Intel Corporation. * @@ -16,26 +16,18 @@ * Use this instead of directly setting the GPIO registers. * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb) */ -#ifndef _ASM_ARCH_IXP2000_GPIO_H_ -#define _ASM_ARCH_IXP2000_GPIO_H_ +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H #ifndef __ASSEMBLY__ -#define GPIO_OUT 0x0 -#define GPIO_IN 0x80 + +#define GPIO_IN 0 +#define GPIO_OUT 1 #define IXP2000_GPIO_LOW 0 #define IXP2000_GPIO_HIGH 1 -#define GPIO_NO_EDGES 0 -#define GPIO_FALLING_EDGE 1 -#define GPIO_RISING_EDGE 2 -#define GPIO_BOTH_EDGES 3 -#define GPIO_LEVEL_LOW 4 -#define GPIO_LEVEL_HIGH 8 - -extern void set_GPIO_IRQ_edge(int gpio_nr, int edge); -extern void set_GPIO_IRQ_level(int gpio_nr, int level); -extern void gpio_line_config(int line, int style); +extern void gpio_line_config(int line, int direction); static inline int gpio_line_get(int line) { @@ -45,11 +37,12 @@ static inline int gpio_line_get(int line) static inline void gpio_line_set(int line, int value) { if (value == IXP2000_GPIO_HIGH) { - ixp_reg_write(IXP2000_GPIO_POSR, BIT(line)); - } else if (value == IXP2000_GPIO_LOW) - ixp_reg_write(IXP2000_GPIO_POCR, BIT(line)); + ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line); + } else if (value == IXP2000_GPIO_LOW) { + ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line); + } } #endif /* !__ASSEMBLY__ */ -#endif /* ASM_ARCH_IXP2000_GPIO_H_ */ +#endif /* ASM_ARCH_IXP2000_GPIO_H_ */ diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h index a8e3c2d..3241cd6 100644 --- a/include/asm-arm/arch-ixp2000/io.h +++ b/include/asm-arm/arch-ixp2000/io.h @@ -17,18 +17,23 @@ #define IO_SPACE_LIMIT 0xffffffff #define __mem_pci(a) (a) -#define ___io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE)) /* - * The IXP2400 before revision B0 asserts byte lanes for PCI I/O + * The A? revisions of the IXP2000s assert byte lanes for PCI I/O * transactions the other way round (MEM transactions don't have this - * issue), so we need to override the standard functions. B0 and later - * have a bit that can be set to 1 to get the 'proper' behavior, but - * since that isn't available on the A? revisions we just keep doing - * things manually. + * issue), so if we want to support those models, we need to override + * the standard I/O functions. + * + * B0 and later have a bit that can be set to 1 to get the proper + * behavior for I/O transactions, which then allows us to use the + * standard I/O functions. This is what we do if the user does not + * explicitly ask for support for pre-B0. */ -#define alignb(addr) (void __iomem *)((unsigned long)addr ^ 3) -#define alignw(addr) (void __iomem *)((unsigned long)addr ^ 2) +#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO +#define ___io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE)) + +#define alignb(addr) (void __iomem *)((unsigned long)(addr) ^ 3) +#define alignw(addr) (void __iomem *)((unsigned long)(addr) ^ 2) #define outb(v,p) __raw_writeb((v),alignb(___io(p))) #define outw(v,p) __raw_writew((v),alignw(___io(p))) @@ -48,6 +53,81 @@ #define insw(p,d,l) __raw_readsw(alignw(___io(p)),d,l) #define insl(p,d,l) __raw_readsl(___io(p),d,l) +#define __is_io_address(p) ((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE) + +#define ioread8(p) \ + ({ \ + unsigned int __v; \ + \ + if (__is_io_address(p)) { \ + __v = __raw_readb(alignb(p)); \ + } else { \ + __v = __raw_readb(p); \ + } \ + \ + __v; \ + }) \ + +#define ioread16(p) \ + ({ \ + unsigned int __v; \ + \ + if (__is_io_address(p)) { \ + __v = __raw_readw(alignw(p)); \ + } else { \ + __v = le16_to_cpu(__raw_readw(p)); \ + } \ + \ + __v; \ + }) + +#define ioread32(p) \ + ({ \ + unsigned int __v; \ + \ + if (__is_io_address(p)) { \ + __v = __raw_readl(p); \ + } else { \ + __v = le32_to_cpu(__raw_readl(p)); \ + } \ + \ + __v; \ + }) + +#define iowrite8(v,p) \ + ({ \ + if (__is_io_address(p)) { \ + __raw_writeb((v), alignb(p)); \ + } else { \ + __raw_writeb((v), p); \ + } \ + }) + +#define iowrite16(v,p) \ + ({ \ + if (__is_io_address(p)) { \ + __raw_writew((v), alignw(p)); \ + } else { \ + __raw_writew(cpu_to_le16(v), p); \ + } \ + }) + +#define iowrite32(v,p) \ + ({ \ + if (__is_io_address(p)) { \ + __raw_writel((v), p); \ + } else { \ + __raw_writel(cpu_to_le32(v), p); \ + } \ + }) + +#define ioport_map(port, nr) ___io(port) + +#define ioport_unmap(addr) +#else +#define __io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE)) +#endif + #ifdef CONFIG_ARCH_IXDP2X01 /* @@ -75,8 +155,8 @@ static inline void insw(u32 ptr, void *buf, int length) * Is this cycle meant for the CS8900? */ if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && - ((port >= IXDP2X01_CS8900_VIRT_BASE) && - (port <= IXDP2X01_CS8900_VIRT_END))) { + (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) && + ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) { u8 *buf8 = (u8*)buf; register u32 tmp32; @@ -100,8 +180,8 @@ static inline void outsw(u32 ptr, void *buf, int length) * Is this cycle meant for the CS8900? */ if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && - ((port >= IXDP2X01_CS8900_VIRT_BASE) && - (port <= IXDP2X01_CS8900_VIRT_END))) { + (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) && + ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) { register u32 tmp32; u8 *buf8 = (u8*)buf; do { @@ -124,8 +204,8 @@ static inline u16 inw(u32 ptr) * Is this cycle meant for the CS8900? */ if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && - ((port >= IXDP2X01_CS8900_VIRT_BASE) && - (port <= IXDP2X01_CS8900_VIRT_END))) { + (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) && + ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) { return (u16)(*port); } @@ -137,8 +217,8 @@ static inline void outw(u16 value, u32 ptr) register volatile u32 *port = (volatile u32 *)ptr; if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && - ((port >= IXDP2X01_CS8900_VIRT_BASE) && - (port <= IXDP2X01_CS8900_VIRT_END))) { + (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) && + ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) { *port = value; return; } diff --git a/include/asm-arm/arch-ixp2000/ixdp2x00.h b/include/asm-arm/arch-ixp2000/ixdp2x00.h index 3a398df..229381c 100644 --- a/include/asm-arm/arch-ixp2000/ixdp2x00.h +++ b/include/asm-arm/arch-ixp2000/ixdp2x00.h @@ -21,8 +21,8 @@ * On board CPLD memory map */ #define IXDP2X00_PHYS_CPLD_BASE 0xc7000000 -#define IXDP2X00_VIRT_CPLD_BASE 0xfafff000 -#define IXDP2X00_CPLD_SIZE 0x00001000 +#define IXDP2X00_VIRT_CPLD_BASE 0xfe000000 +#define IXDP2X00_CPLD_SIZE 0x00100000 #define IXDP2X00_CPLD_REG(x) \ diff --git a/include/asm-arm/arch-ixp2000/ixdp2x01.h b/include/asm-arm/arch-ixp2000/ixdp2x01.h index b3a1bcd..b768009 100644 --- a/include/asm-arm/arch-ixp2000/ixdp2x01.h +++ b/include/asm-arm/arch-ixp2000/ixdp2x01.h @@ -18,8 +18,8 @@ #define __IXDP2X01_H__ #define IXDP2X01_PHYS_CPLD_BASE 0xc6024000 -#define IXDP2X01_VIRT_CPLD_BASE 0xfafff000 -#define IXDP2X01_CPLD_REGION_SIZE 0x00001000 +#define IXDP2X01_VIRT_CPLD_BASE 0xfe000000 +#define IXDP2X01_CPLD_REGION_SIZE 0x00100000 #define IXDP2X01_CPLD_VIRT_REG(reg) (volatile unsigned long*)(IXDP2X01_VIRT_CPLD_BASE | reg) #define IXDP2X01_CPLD_PHYS_REG(reg) (volatile u32*)(IXDP2X01_PHYS_CPLD_BASE | reg) diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h index 6c56708..75623f8 100644 --- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h +++ b/include/asm-arm/arch-ixp2000/ixp2000-regs.h @@ -18,6 +18,21 @@ #ifndef _IXP2000_REGS_H_ #define _IXP2000_REGS_H_ +/* + * IXP2000 linux memory map: + * + * virt phys size + * fb000000 db000000 16M PCI CFG1 + * fc000000 da000000 16M PCI CFG0 + * fd000000 d8000000 16M PCI I/O + * fe[0-7]00000 8M per-platform mappings + * feb00000 c8000000 1M MSF + * fec00000 df000000 1M PCI CSRs + * fed00000 de000000 1M PCI CREG + * fee00000 d6000000 1M INTCTL + * fef00000 c0000000 1M CAP + */ + /* * Static I/O regions. * @@ -71,6 +86,10 @@ #define IXP2000_PCI_CSR_VIRT_BASE 0xfec00000 #define IXP2000_PCI_CSR_SIZE 0x00100000 +#define IXP2000_MSF_PHYS_BASE 0xc8000000 +#define IXP2000_MSF_VIRT_BASE 0xfeb00000 +#define IXP2000_MSF_SIZE 0x00100000 + #define IXP2000_PCI_IO_PHYS_BASE 0xd8000000 #define IXP2000_PCI_IO_VIRT_BASE 0xfd000000 #define IXP2000_PCI_IO_SIZE 0x01000000 @@ -241,7 +260,7 @@ #define PCI_CONTROL_BE_DEI (1 << 21) /* Big Endian Data Enable In */ #define PCI_CONTROL_BE_BEO (1 << 20) /* Big Endian Byte Enable Out */ #define PCI_CONTROL_BE_BEI (1 << 19) /* Big Endian Byte Enable In */ -#define PCI_CONTROL_PNR (1 << 17) /* PCI Not Reset bit */ +#define PCI_CONTROL_IEE (1 << 17) /* I/O cycle Endian swap Enable */ #define IXP2000_PCI_RST_REL (1 << 2) #define CFG_RST_DIR (*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF) @@ -363,6 +382,7 @@ #define IXP2000_MIN_REV_MASK 0x0000000F #define IXP2000_PROD_ID_MASK 0xFFFFFFFF +#define IXP2000_PRODUCT_ID GLOBAL_REG(0x00) #define IXP2000_MISC_CONTROL GLOBAL_REG(0x04) #define IXP2000_MSF_CLK_CNTRL GLOBAL_REG(0x08) #define IXP2000_RESET0 GLOBAL_REG(0x0c) diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h index 901bba6..52ded51 100644 --- a/include/asm-arm/arch-ixp2000/platform.h +++ b/include/asm-arm/arch-ixp2000/platform.h @@ -138,30 +138,10 @@ struct ixp2000_flash_data { unsigned long (*bank_setup)(unsigned long); }; -/* - * GPIO helper functions - */ -#define GPIO_IN 0 -#define GPIO_OUT 1 - -extern void gpio_line_config(int line, int style); - -static inline int gpio_line_get(int line) -{ - return (((*IXP2000_GPIO_PLR) >> line) & 1); -} - -static inline void gpio_line_set(int line, int value) -{ - if (value) - ixp2000_reg_write(IXP2000_GPIO_POSR, (1 << line)); - else - ixp2000_reg_write(IXP2000_GPIO_POCR, (1 << line)); -} - struct ixp2000_i2c_pins { unsigned long sda_pin; unsigned long scl_pin; }; + #endif /* !__ASSEMBLY__ */ diff --git a/include/asm-arm/arch-ixp2000/vmalloc.h b/include/asm-arm/arch-ixp2000/vmalloc.h index 473dff4..2751369 100644 --- a/include/asm-arm/arch-ixp2000/vmalloc.h +++ b/include/asm-arm/arch-ixp2000/vmalloc.h @@ -17,4 +17,4 @@ * The vmalloc() routines leaves a hole of 4kB between each vmalloced * area for the same reason. ;) */ -#define VMALLOC_END 0xfaffefff +#define VMALLOC_END 0xfb000000 |