summaryrefslogtreecommitdiff
path: root/include/asm-x86/uaccess_32.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-x86/uaccess_32.h')
-rw-r--r--include/asm-x86/uaccess_32.h422
1 files changed, 0 insertions, 422 deletions
diff --git a/include/asm-x86/uaccess_32.h b/include/asm-x86/uaccess_32.h
index 8e7595c..6fdef39 100644
--- a/include/asm-x86/uaccess_32.h
+++ b/include/asm-x86/uaccess_32.h
@@ -11,426 +11,6 @@
#include <asm/asm.h>
#include <asm/page.h>
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not. If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-
-
-#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL)
-#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
-
-#define get_ds() (KERNEL_DS)
-#define get_fs() (current_thread_info()->addr_limit)
-#define set_fs(x) (current_thread_info()->addr_limit = (x))
-
-#define segment_eq(a, b) ((a).seg == (b).seg)
-
-/*
- * movsl can be slow when source and dest are not both 8-byte aligned
- */
-#ifdef CONFIG_X86_INTEL_USERCOPY
-extern struct movsl_mask {
- int mask;
-} ____cacheline_aligned_in_smp movsl_mask;
-#endif
-
-#define __addr_ok(addr) \
- ((unsigned long __force)(addr) < \
- (current_thread_info()->addr_limit.seg))
-
-/*
- * Test whether a block of memory is a valid user space address.
- * Returns 0 if the range is valid, nonzero otherwise.
- *
- * This is equivalent to the following test:
- * (u33)addr + (u33)size >= (u33)current->addr_limit.seg
- *
- * This needs 33-bit arithmetic. We have a carry...
- */
-#define __range_ok(addr, size) \
-({ \
- unsigned long flag, roksum; \
- __chk_user_ptr(addr); \
- asm("addl %3,%1 ; sbbl %0,%0; cmpl %1,%4; sbbl $0,%0" \
- :"=&r" (flag), "=r" (roksum) \
- :"1" (addr), "g" ((int)(size)), \
- "rm" (current_thread_info()->addr_limit.seg)); \
- flag; \
-})
-
-/**
- * access_ok: - Checks if a user space pointer is valid
- * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that
- * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
- * to write to a block, it is always safe to read from it.
- * @addr: User space pointer to start of block to check
- * @size: Size of block to check
- *
- * Context: User context only. This function may sleep.
- *
- * Checks if a pointer to a block of memory in user space is valid.
- *
- * Returns true (nonzero) if the memory block may be valid, false (zero)
- * if it is definitely invalid.
- *
- * Note that, depending on architecture, this function probably just
- * checks that the pointer is in the user space range - after calling
- * this function, memory access functions may still return -EFAULT.
- */
-#define access_ok(type, addr, size) (likely(__range_ok(addr, size) == 0))
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
- unsigned long insn, fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
-/*
- * These are the main single-value transfer routines. They automatically
- * use the right size if we just have the right pointer type.
- *
- * This gets kind of ugly. We want to return _two_ values in "get_user()"
- * and yet we don't want to do any pointers, because that is too much
- * of a performance impact. Thus we have a few rather ugly macros here,
- * and hide all the ugliness from the user.
- *
- * The "__xxx" versions of the user access functions are versions that
- * do not verify the address space, that must have been done previously
- * with a separate "access_ok()" call (this is used when we do multiple
- * accesses to the same area of user memory).
- */
-
-extern void __get_user_1(void);
-extern void __get_user_2(void);
-extern void __get_user_4(void);
-
-#define __get_user_x(size, ret, x, ptr) \
- asm volatile("call __get_user_" #size \
- :"=a" (ret),"=d" (x) \
- :"0" (ptr))
-
-
-/* Careful: we have to cast the result to the type of the pointer
- * for sign reasons */
-
-/**
- * get_user: - Get a simple variable from user space.
- * @x: Variable to store result.
- * @ptr: Source address, in user space.
- *
- * Context: User context only. This function may sleep.
- *
- * This macro copies a single simple variable from user space to kernel
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and the result of
- * dereferencing @ptr must be assignable to @x without a cast.
- *
- * Returns zero on success, or -EFAULT on error.
- * On error, the variable @x is set to zero.
- */
-#define get_user(x, ptr) \
-({ \
- int __ret_gu; \
- unsigned long __val_gu; \
- __chk_user_ptr(ptr); \
- switch (sizeof(*(ptr))) { \
- case 1: \
- __get_user_x(1, __ret_gu, __val_gu, ptr); \
- break; \
- case 2: \
- __get_user_x(2, __ret_gu, __val_gu, ptr); \
- break; \
- case 4: \
- __get_user_x(4, __ret_gu, __val_gu, ptr); \
- break; \
- default: \
- __get_user_x(X, __ret_gu, __val_gu, ptr); \
- break; \
- } \
- (x) = (__typeof__(*(ptr)))__val_gu; \
- __ret_gu; \
-})
-
-extern void __put_user_bad(void);
-
-/*
- * Strange magic calling convention: pointer in %ecx,
- * value in %eax(:%edx), return value in %eax, no clobbers.
- */
-extern void __put_user_1(void);
-extern void __put_user_2(void);
-extern void __put_user_4(void);
-extern void __put_user_8(void);
-
-#define __put_user_1(x, ptr) \
- asm volatile("call __put_user_1" : "=a" (__ret_pu) \
- : "0" ((typeof(*(ptr)))(x)), "c" (ptr))
-
-#define __put_user_2(x, ptr) \
- asm volatile("call __put_user_2" : "=a" (__ret_pu) \
- : "0" ((typeof(*(ptr)))(x)), "c" (ptr))
-
-#define __put_user_4(x, ptr) \
- asm volatile("call __put_user_4" : "=a" (__ret_pu) \
- : "0" ((typeof(*(ptr)))(x)), "c" (ptr))
-
-#define __put_user_8(x, ptr) \
- asm volatile("call __put_user_8" : "=a" (__ret_pu) \
- : "A" ((typeof(*(ptr)))(x)), "c" (ptr))
-
-#define __put_user_X(x, ptr) \
- asm volatile("call __put_user_X" : "=a" (__ret_pu) \
- : "c" (ptr))
-
-/**
- * put_user: - Write a simple value into user space.
- * @x: Value to copy to user space.
- * @ptr: Destination address, in user space.
- *
- * Context: User context only. This function may sleep.
- *
- * This macro copies a single simple value from kernel space to user
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and @x must be assignable
- * to the result of dereferencing @ptr.
- *
- * Returns zero on success, or -EFAULT on error.
- */
-#ifdef CONFIG_X86_WP_WORKS_OK
-
-#define put_user(x, ptr) \
-({ \
- int __ret_pu; \
- __typeof__(*(ptr)) __pu_val; \
- __chk_user_ptr(ptr); \
- __pu_val = x; \
- switch (sizeof(*(ptr))) { \
- case 1: \
- __put_user_1(__pu_val, ptr); \
- break; \
- case 2: \
- __put_user_2(__pu_val, ptr); \
- break; \
- case 4: \
- __put_user_4(__pu_val, ptr); \
- break; \
- case 8: \
- __put_user_8(__pu_val, ptr); \
- break; \
- default: \
- __put_user_X(__pu_val, ptr); \
- break; \
- } \
- __ret_pu; \
-})
-
-#else
-#define put_user(x, ptr) \
-({ \
- int __ret_pu; \
- __typeof__(*(ptr))__pus_tmp = x; \
- __ret_pu = 0; \
- if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, \
- sizeof(*(ptr))) != 0)) \
- __ret_pu = -EFAULT; \
- __ret_pu; \
-})
-
-
-#endif
-
-/**
- * __get_user: - Get a simple variable from user space, with less checking.
- * @x: Variable to store result.
- * @ptr: Source address, in user space.
- *
- * Context: User context only. This function may sleep.
- *
- * This macro copies a single simple variable from user space to kernel
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and the result of
- * dereferencing @ptr must be assignable to @x without a cast.
- *
- * Caller must check the pointer with access_ok() before calling this
- * function.
- *
- * Returns zero on success, or -EFAULT on error.
- * On error, the variable @x is set to zero.
- */
-#define __get_user(x, ptr) \
- __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
-
-
-/**
- * __put_user: - Write a simple value into user space, with less checking.
- * @x: Value to copy to user space.
- * @ptr: Destination address, in user space.
- *
- * Context: User context only. This function may sleep.
- *
- * This macro copies a single simple value from kernel space to user
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and @x must be assignable
- * to the result of dereferencing @ptr.
- *
- * Caller must check the pointer with access_ok() before calling this
- * function.
- *
- * Returns zero on success, or -EFAULT on error.
- */
-#define __put_user(x, ptr) \
- __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-
-#define __put_user_nocheck(x, ptr, size) \
-({ \
- long __pu_err; \
- __put_user_size((x), (ptr), (size), __pu_err, -EFAULT); \
- __pu_err; \
-})
-
-
-#define __put_user_u64(x, addr, err) \
- asm volatile("1: movl %%eax,0(%2)\n" \
- "2: movl %%edx,4(%2)\n" \
- "3:\n" \
- ".section .fixup,\"ax\"\n" \
- "4: movl %3,%0\n" \
- " jmp 3b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b, 4b) \
- _ASM_EXTABLE(2b, 4b) \
- : "=r" (err) \
- : "A" (x), "r" (addr), "i" (-EFAULT), "0" (err))
-
-#ifdef CONFIG_X86_WP_WORKS_OK
-
-#define __put_user_size(x, ptr, size, retval, errret) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: \
- __put_user_asm(x, ptr, retval, "b", "b", "iq", errret); \
- break; \
- case 2: \
- __put_user_asm(x, ptr, retval, "w", "w", "ir", errret); \
- break; \
- case 4: \
- __put_user_asm(x, ptr, retval, "l", "", "ir", errret); \
- break; \
- case 8: \
- __put_user_u64((__typeof__(*ptr))(x), ptr, retval); \
- break; \
- default: \
- __put_user_bad(); \
- } \
-} while (0)
-
-#else
-
-#define __put_user_size(x, ptr, size, retval, errret) \
-do { \
- __typeof__(*(ptr))__pus_tmp = x; \
- retval = 0; \
- \
- if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, size) != 0)) \
- retval = errret; \
-} while (0)
-
-#endif
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct __user *)(x))
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-#define __put_user_asm(x, addr, err, itype, rtype, ltype, errret) \
- asm volatile("1: mov"itype" %"rtype"1,%2\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: movl %3,%0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b, 3b) \
- : "=r"(err) \
- : ltype (x), "m" (__m(addr)), "i" (errret), "0" (err))
-
-
-#define __get_user_nocheck(x, ptr, size) \
-({ \
- long __gu_err; \
- unsigned long __gu_val; \
- __get_user_size(__gu_val, (ptr), (size), __gu_err, -EFAULT); \
- (x) = (__typeof__(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-extern long __get_user_bad(void);
-
-#define __get_user_size(x, ptr, size, retval, errret) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: \
- __get_user_asm(x, ptr, retval, "b", "b", "=q", errret); \
- break; \
- case 2: \
- __get_user_asm(x, ptr, retval, "w", "w", "=r", errret); \
- break; \
- case 4: \
- __get_user_asm(x, ptr, retval, "l", "", "=r", errret); \
- break; \
- default: \
- (x) = __get_user_bad(); \
- } \
-} while (0)
-
-#define __get_user_asm(x, addr, err, itype, rtype, ltype, errret) \
- asm volatile("1: mov"itype" %2,%"rtype"1\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: movl %3,%0\n" \
- " xor"itype" %"rtype"1,%"rtype"1\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b, 3b) \
- : "=r" (err), ltype (x) \
- : "m" (__m(addr)), "i" (errret), "0" (err))
-
-
unsigned long __must_check __copy_to_user_ll
(void __user *to, const void *from, unsigned long n);
unsigned long __must_check __copy_from_user_ll
@@ -576,8 +156,6 @@ __copy_from_user(void *to, const void __user *from, unsigned long n)
return __copy_from_user_ll(to, from, n);
}
-#define ARCH_HAS_NOCACHE_UACCESS
-
static __always_inline unsigned long __copy_from_user_nocache(void *to,
const void __user *from, unsigned long n)
{