diff options
Diffstat (limited to 'include/linux')
-rw-r--r-- | include/linux/amba/serial.h | 3 | ||||
-rw-r--r-- | include/linux/platform_data/serial-sccnxp.h | 4 | ||||
-rw-r--r-- | include/linux/serial_s3c.h | 260 | ||||
-rw-r--r-- | include/linux/tty.h | 41 | ||||
-rw-r--r-- | include/linux/tty_ldisc.h | 132 |
5 files changed, 366 insertions, 74 deletions
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index f612c78..62d9303 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -203,6 +203,9 @@ struct amba_pl011_data { bool (*dma_filter)(struct dma_chan *chan, void *filter_param); void *dma_rx_param; void *dma_tx_param; + bool dma_rx_poll_enable; + unsigned int dma_rx_poll_rate; + unsigned int dma_rx_poll_timeout; void (*init) (void); void (*exit) (void); }; diff --git a/include/linux/platform_data/serial-sccnxp.h b/include/linux/platform_data/serial-sccnxp.h index 215574d..bdc510d 100644 --- a/include/linux/platform_data/serial-sccnxp.h +++ b/include/linux/platform_data/serial-sccnxp.h @@ -86,10 +86,6 @@ struct sccnxp_pdata { const u32 mctrl_cfg[SCCNXP_MAX_UARTS]; /* Timer value for polling mode (usecs) */ const unsigned int poll_time_us; - /* Called during startup */ - void (*init)(void); - /* Called before finish */ - void (*exit)(void); }; #endif diff --git a/include/linux/serial_s3c.h b/include/linux/serial_s3c.h new file mode 100644 index 0000000..907d9d1 --- /dev/null +++ b/include/linux/serial_s3c.h @@ -0,0 +1,260 @@ +/* + * Internal header file for Samsung S3C2410 serial ports (UART0-2) + * + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * + * Additional defines, Copyright 2003 Simtec Electronics (linux@simtec.co.uk) + * + * Adapted from: + * + * Internal header file for MX1ADS serial ports (UART1 & 2) + * + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#ifndef __ASM_ARM_REGS_SERIAL_H +#define __ASM_ARM_REGS_SERIAL_H + +#define S3C2410_URXH (0x24) +#define S3C2410_UTXH (0x20) +#define S3C2410_ULCON (0x00) +#define S3C2410_UCON (0x04) +#define S3C2410_UFCON (0x08) +#define S3C2410_UMCON (0x0C) +#define S3C2410_UBRDIV (0x28) +#define S3C2410_UTRSTAT (0x10) +#define S3C2410_UERSTAT (0x14) +#define S3C2410_UFSTAT (0x18) +#define S3C2410_UMSTAT (0x1C) + +#define S3C2410_LCON_CFGMASK ((0xF<<3)|(0x3)) + +#define S3C2410_LCON_CS5 (0x0) +#define S3C2410_LCON_CS6 (0x1) +#define S3C2410_LCON_CS7 (0x2) +#define S3C2410_LCON_CS8 (0x3) +#define S3C2410_LCON_CSMASK (0x3) + +#define S3C2410_LCON_PNONE (0x0) +#define S3C2410_LCON_PEVEN (0x5 << 3) +#define S3C2410_LCON_PODD (0x4 << 3) +#define S3C2410_LCON_PMASK (0x7 << 3) + +#define S3C2410_LCON_STOPB (1<<2) +#define S3C2410_LCON_IRM (1<<6) + +#define S3C2440_UCON_CLKMASK (3<<10) +#define S3C2440_UCON_CLKSHIFT (10) +#define S3C2440_UCON_PCLK (0<<10) +#define S3C2440_UCON_UCLK (1<<10) +#define S3C2440_UCON_PCLK2 (2<<10) +#define S3C2440_UCON_FCLK (3<<10) +#define S3C2443_UCON_EPLL (3<<10) + +#define S3C6400_UCON_CLKMASK (3<<10) +#define S3C6400_UCON_CLKSHIFT (10) +#define S3C6400_UCON_PCLK (0<<10) +#define S3C6400_UCON_PCLK2 (2<<10) +#define S3C6400_UCON_UCLK0 (1<<10) +#define S3C6400_UCON_UCLK1 (3<<10) + +#define S3C2440_UCON2_FCLK_EN (1<<15) +#define S3C2440_UCON0_DIVMASK (15 << 12) +#define S3C2440_UCON1_DIVMASK (15 << 12) +#define S3C2440_UCON2_DIVMASK (7 << 12) +#define S3C2440_UCON_DIVSHIFT (12) + +#define S3C2412_UCON_CLKMASK (3<<10) +#define S3C2412_UCON_CLKSHIFT (10) +#define S3C2412_UCON_UCLK (1<<10) +#define S3C2412_UCON_USYSCLK (3<<10) +#define S3C2412_UCON_PCLK (0<<10) +#define S3C2412_UCON_PCLK2 (2<<10) + +#define S3C2410_UCON_CLKMASK (1 << 10) +#define S3C2410_UCON_CLKSHIFT (10) +#define S3C2410_UCON_UCLK (1<<10) +#define S3C2410_UCON_SBREAK (1<<4) + +#define S3C2410_UCON_TXILEVEL (1<<9) +#define S3C2410_UCON_RXILEVEL (1<<8) +#define S3C2410_UCON_TXIRQMODE (1<<2) +#define S3C2410_UCON_RXIRQMODE (1<<0) +#define S3C2410_UCON_RXFIFO_TOI (1<<7) +#define S3C2443_UCON_RXERR_IRQEN (1<<6) +#define S3C2443_UCON_LOOPBACK (1<<5) + +#define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI) + +#define S3C2410_UFCON_FIFOMODE (1<<0) +#define S3C2410_UFCON_TXTRIG0 (0<<6) +#define S3C2410_UFCON_RXTRIG8 (1<<4) +#define S3C2410_UFCON_RXTRIG12 (2<<4) + +/* S3C2440 FIFO trigger levels */ +#define S3C2440_UFCON_RXTRIG1 (0<<4) +#define S3C2440_UFCON_RXTRIG8 (1<<4) +#define S3C2440_UFCON_RXTRIG16 (2<<4) +#define S3C2440_UFCON_RXTRIG32 (3<<4) + +#define S3C2440_UFCON_TXTRIG0 (0<<6) +#define S3C2440_UFCON_TXTRIG16 (1<<6) +#define S3C2440_UFCON_TXTRIG32 (2<<6) +#define S3C2440_UFCON_TXTRIG48 (3<<6) + +#define S3C2410_UFCON_RESETBOTH (3<<1) +#define S3C2410_UFCON_RESETTX (1<<2) +#define S3C2410_UFCON_RESETRX (1<<1) + +#define S3C2410_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S3C2410_UFCON_TXTRIG0 | \ + S3C2410_UFCON_RXTRIG8 ) + +#define S3C2410_UMCOM_AFC (1<<4) +#define S3C2410_UMCOM_RTS_LOW (1<<0) + +#define S3C2412_UMCON_AFC_63 (0<<5) /* same as s3c2443 */ +#define S3C2412_UMCON_AFC_56 (1<<5) +#define S3C2412_UMCON_AFC_48 (2<<5) +#define S3C2412_UMCON_AFC_40 (3<<5) +#define S3C2412_UMCON_AFC_32 (4<<5) +#define S3C2412_UMCON_AFC_24 (5<<5) +#define S3C2412_UMCON_AFC_16 (6<<5) +#define S3C2412_UMCON_AFC_8 (7<<5) + +#define S3C2410_UFSTAT_TXFULL (1<<9) +#define S3C2410_UFSTAT_RXFULL (1<<8) +#define S3C2410_UFSTAT_TXMASK (15<<4) +#define S3C2410_UFSTAT_TXSHIFT (4) +#define S3C2410_UFSTAT_RXMASK (15<<0) +#define S3C2410_UFSTAT_RXSHIFT (0) + +/* UFSTAT S3C2443 same as S3C2440 */ +#define S3C2440_UFSTAT_TXFULL (1<<14) +#define S3C2440_UFSTAT_RXFULL (1<<6) +#define S3C2440_UFSTAT_TXSHIFT (8) +#define S3C2440_UFSTAT_RXSHIFT (0) +#define S3C2440_UFSTAT_TXMASK (63<<8) +#define S3C2440_UFSTAT_RXMASK (63) + +#define S3C2410_UTRSTAT_TXE (1<<2) +#define S3C2410_UTRSTAT_TXFE (1<<1) +#define S3C2410_UTRSTAT_RXDR (1<<0) + +#define S3C2410_UERSTAT_OVERRUN (1<<0) +#define S3C2410_UERSTAT_FRAME (1<<2) +#define S3C2410_UERSTAT_BREAK (1<<3) +#define S3C2443_UERSTAT_PARITY (1<<1) + +#define S3C2410_UERSTAT_ANY (S3C2410_UERSTAT_OVERRUN | \ + S3C2410_UERSTAT_FRAME | \ + S3C2410_UERSTAT_BREAK) + +#define S3C2410_UMSTAT_CTS (1<<0) +#define S3C2410_UMSTAT_DeltaCTS (1<<2) + +#define S3C2443_DIVSLOT (0x2C) + +/* S3C64XX interrupt registers. */ +#define S3C64XX_UINTP 0x30 +#define S3C64XX_UINTSP 0x34 +#define S3C64XX_UINTM 0x38 + +#define S3C64XX_UINTM_RXD (0) +#define S3C64XX_UINTM_TXD (2) +#define S3C64XX_UINTM_RXD_MSK (1 << S3C64XX_UINTM_RXD) +#define S3C64XX_UINTM_TXD_MSK (1 << S3C64XX_UINTM_TXD) + +/* Following are specific to S5PV210 */ +#define S5PV210_UCON_CLKMASK (1<<10) +#define S5PV210_UCON_CLKSHIFT (10) +#define S5PV210_UCON_PCLK (0<<10) +#define S5PV210_UCON_UCLK (1<<10) + +#define S5PV210_UFCON_TXTRIG0 (0<<8) +#define S5PV210_UFCON_TXTRIG4 (1<<8) +#define S5PV210_UFCON_TXTRIG8 (2<<8) +#define S5PV210_UFCON_TXTRIG16 (3<<8) +#define S5PV210_UFCON_TXTRIG32 (4<<8) +#define S5PV210_UFCON_TXTRIG64 (5<<8) +#define S5PV210_UFCON_TXTRIG128 (6<<8) +#define S5PV210_UFCON_TXTRIG256 (7<<8) + +#define S5PV210_UFCON_RXTRIG1 (0<<4) +#define S5PV210_UFCON_RXTRIG4 (1<<4) +#define S5PV210_UFCON_RXTRIG8 (2<<4) +#define S5PV210_UFCON_RXTRIG16 (3<<4) +#define S5PV210_UFCON_RXTRIG32 (4<<4) +#define S5PV210_UFCON_RXTRIG64 (5<<4) +#define S5PV210_UFCON_RXTRIG128 (6<<4) +#define S5PV210_UFCON_RXTRIG256 (7<<4) + +#define S5PV210_UFSTAT_TXFULL (1<<24) +#define S5PV210_UFSTAT_RXFULL (1<<8) +#define S5PV210_UFSTAT_TXMASK (255<<16) +#define S5PV210_UFSTAT_TXSHIFT (16) +#define S5PV210_UFSTAT_RXMASK (255<<0) +#define S5PV210_UFSTAT_RXSHIFT (0) + +#define S3C2410_UCON_CLKSEL0 (1 << 0) +#define S3C2410_UCON_CLKSEL1 (1 << 1) +#define S3C2410_UCON_CLKSEL2 (1 << 2) +#define S3C2410_UCON_CLKSEL3 (1 << 3) + +/* Default values for s5pv210 UCON and UFCON uart registers */ +#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +#ifndef __ASSEMBLY__ + +/* configuration structure for per-machine configurations for the + * serial port + * + * the pointer is setup by the machine specific initialisation from the + * arch/arm/mach-s3c2410/ directory. +*/ + +struct s3c2410_uartcfg { + unsigned char hwport; /* hardware port number */ + unsigned char unused; + unsigned short flags; + upf_t uart_flags; /* default uart flags */ + unsigned int clk_sel; + + unsigned int has_fracval; + + unsigned long ucon; /* value of ucon for port */ + unsigned long ulcon; /* value of ulcon for port */ + unsigned long ufcon; /* value of ufcon for port */ +}; + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_ARM_REGS_SERIAL_H */ + diff --git a/include/linux/tty.h b/include/linux/tty.h index c75d886..367a9df 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -255,9 +255,9 @@ struct tty_struct { int count; struct winsize winsize; /* termios mutex */ unsigned char stopped:1, hw_stopped:1, flow_stopped:1, packet:1; - unsigned char warned:1; unsigned char ctrl_status; /* ctrl_lock */ unsigned int receive_room; /* Bytes free for queue */ + int flow_change; struct tty_struct *link; struct fasync_struct *fasync; @@ -315,9 +315,25 @@ struct tty_file_private { #define TTY_NO_WRITE_SPLIT 17 /* Preserve write boundaries to driver */ #define TTY_HUPPED 18 /* Post driver->hangup() */ #define TTY_HUPPING 21 /* ->hangup() in progress */ +#define TTY_LDISC_HALTED 22 /* Line discipline is halted */ #define TTY_WRITE_FLUSH(tty) tty_write_flush((tty)) +/* Values for tty->flow_change */ +#define TTY_THROTTLE_SAFE 1 +#define TTY_UNTHROTTLE_SAFE 2 + +static inline void __tty_set_flow_change(struct tty_struct *tty, int val) +{ + tty->flow_change = val; +} + +static inline void tty_set_flow_change(struct tty_struct *tty, int val) +{ + tty->flow_change = val; + smp_mb(); +} + #ifdef CONFIG_TTY extern void console_init(void); extern void tty_kref_put(struct tty_struct *tty); @@ -400,6 +416,8 @@ extern int tty_write_room(struct tty_struct *tty); extern void tty_driver_flush_buffer(struct tty_struct *tty); extern void tty_throttle(struct tty_struct *tty); extern void tty_unthrottle(struct tty_struct *tty); +extern int tty_throttle_safe(struct tty_struct *tty); +extern int tty_unthrottle_safe(struct tty_struct *tty); extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws); extern void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *tty); @@ -419,13 +437,28 @@ extern void tty_flush_to_ldisc(struct tty_struct *tty); extern void tty_buffer_free_all(struct tty_port *port); extern void tty_buffer_flush(struct tty_struct *tty); extern void tty_buffer_init(struct tty_port *port); -extern speed_t tty_get_baud_rate(struct tty_struct *tty); extern speed_t tty_termios_baud_rate(struct ktermios *termios); extern speed_t tty_termios_input_baud_rate(struct ktermios *termios); extern void tty_termios_encode_baud_rate(struct ktermios *termios, speed_t ibaud, speed_t obaud); extern void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud); + +/** + * tty_get_baud_rate - get tty bit rates + * @tty: tty to query + * + * Returns the baud rate as an integer for this terminal. The + * termios lock must be held by the caller and the terminal bit + * flags may be updated. + * + * Locking: none + */ +static inline speed_t tty_get_baud_rate(struct tty_struct *tty) +{ + return tty_termios_baud_rate(&tty->termios); +} + extern void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old); extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b); extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt); @@ -502,6 +535,8 @@ extern int tty_port_carrier_raised(struct tty_port *port); extern void tty_port_raise_dtr_rts(struct tty_port *port); extern void tty_port_lower_dtr_rts(struct tty_port *port); extern void tty_port_hangup(struct tty_port *port); +extern void tty_port_tty_hangup(struct tty_port *port, bool check_clocal); +extern void tty_port_tty_wakeup(struct tty_port *port); extern int tty_port_block_til_ready(struct tty_port *port, struct tty_struct *tty, struct file *filp); extern int tty_port_close_start(struct tty_port *port, @@ -526,8 +561,6 @@ extern void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty); extern void tty_ldisc_init(struct tty_struct *tty); extern void tty_ldisc_deinit(struct tty_struct *tty); extern void tty_ldisc_begin(void); -/* This last one is just for the tty layer internals and shouldn't be used elsewhere */ -extern void tty_ldisc_enable(struct tty_struct *tty); /* n_tty.c */ diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h index 455a0d7..58390c7 100644 --- a/include/linux/tty_ldisc.h +++ b/include/linux/tty_ldisc.h @@ -9,89 +9,89 @@ * * int (*open)(struct tty_struct *); * - * This function is called when the line discipline is associated - * with the tty. The line discipline can use this as an - * opportunity to initialize any state needed by the ldisc routines. - * + * This function is called when the line discipline is associated + * with the tty. The line discipline can use this as an + * opportunity to initialize any state needed by the ldisc routines. + * * void (*close)(struct tty_struct *); * * This function is called when the line discipline is being - * shutdown, either because the tty is being closed or because - * the tty is being changed to use a new line discipline - * + * shutdown, either because the tty is being closed or because + * the tty is being changed to use a new line discipline + * * void (*flush_buffer)(struct tty_struct *tty); * - * This function instructs the line discipline to clear its - * buffers of any input characters it may have queued to be - * delivered to the user mode process. - * + * This function instructs the line discipline to clear its + * buffers of any input characters it may have queued to be + * delivered to the user mode process. + * * ssize_t (*chars_in_buffer)(struct tty_struct *tty); * - * This function returns the number of input characters the line + * This function returns the number of input characters the line * discipline may have queued up to be delivered to the user mode * process. - * + * * ssize_t (*read)(struct tty_struct * tty, struct file * file, * unsigned char * buf, size_t nr); * - * This function is called when the user requests to read from - * the tty. The line discipline will return whatever characters - * it has buffered up for the user. If this function is not - * defined, the user will receive an EIO error. - * + * This function is called when the user requests to read from + * the tty. The line discipline will return whatever characters + * it has buffered up for the user. If this function is not + * defined, the user will receive an EIO error. + * * ssize_t (*write)(struct tty_struct * tty, struct file * file, - * const unsigned char * buf, size_t nr); - * - * This function is called when the user requests to write to the - * tty. The line discipline will deliver the characters to the - * low-level tty device for transmission, optionally performing - * some processing on the characters first. If this function is - * not defined, the user will receive an EIO error. - * + * const unsigned char * buf, size_t nr); + * + * This function is called when the user requests to write to the + * tty. The line discipline will deliver the characters to the + * low-level tty device for transmission, optionally performing + * some processing on the characters first. If this function is + * not defined, the user will receive an EIO error. + * * int (*ioctl)(struct tty_struct * tty, struct file * file, - * unsigned int cmd, unsigned long arg); + * unsigned int cmd, unsigned long arg); * * This function is called when the user requests an ioctl which - * is not handled by the tty layer or the low-level tty driver. - * It is intended for ioctls which affect line discpline - * operation. Note that the search order for ioctls is (1) tty - * layer, (2) tty low-level driver, (3) line discpline. So a - * low-level driver can "grab" an ioctl request before the line - * discpline has a chance to see it. - * + * is not handled by the tty layer or the low-level tty driver. + * It is intended for ioctls which affect line discpline + * operation. Note that the search order for ioctls is (1) tty + * layer, (2) tty low-level driver, (3) line discpline. So a + * low-level driver can "grab" an ioctl request before the line + * discpline has a chance to see it. + * * long (*compat_ioctl)(struct tty_struct * tty, struct file * file, - * unsigned int cmd, unsigned long arg); + * unsigned int cmd, unsigned long arg); * - * Process ioctl calls from 32-bit process on 64-bit system + * Process ioctl calls from 32-bit process on 64-bit system * * void (*set_termios)(struct tty_struct *tty, struct ktermios * old); * - * This function notifies the line discpline that a change has - * been made to the termios structure. - * + * This function notifies the line discpline that a change has + * been made to the termios structure. + * * int (*poll)(struct tty_struct * tty, struct file * file, - * poll_table *wait); + * poll_table *wait); * - * This function is called when a user attempts to select/poll on a - * tty device. It is solely the responsibility of the line - * discipline to handle poll requests. + * This function is called when a user attempts to select/poll on a + * tty device. It is solely the responsibility of the line + * discipline to handle poll requests. * * void (*receive_buf)(struct tty_struct *, const unsigned char *cp, - * char *fp, int count); - * - * This function is called by the low-level tty driver to send - * characters received by the hardware to the line discpline for - * processing. <cp> is a pointer to the buffer of input - * character received by the device. <fp> is a pointer to a - * pointer of flag bytes which indicate whether a character was - * received with a parity error, etc. - * + * char *fp, int count); + * + * This function is called by the low-level tty driver to send + * characters received by the hardware to the line discpline for + * processing. <cp> is a pointer to the buffer of input + * character received by the device. <fp> is a pointer to a + * pointer of flag bytes which indicate whether a character was + * received with a parity error, etc. + * * void (*write_wakeup)(struct tty_struct *); * - * This function is called by the low-level tty driver to signal - * that line discpline should try to send more characters to the - * low-level driver for transmission. If the line discpline does - * not have any more data to send, it can just return. + * This function is called by the low-level tty driver to signal + * that line discpline should try to send more characters to the + * low-level driver for transmission. If the line discpline does + * not have any more data to send, it can just return. * * int (*hangup)(struct tty_struct *) * @@ -115,7 +115,7 @@ struct tty_ldisc_ops { char *name; int num; int flags; - + /* * The following routines are called from above. */ @@ -123,19 +123,19 @@ struct tty_ldisc_ops { void (*close)(struct tty_struct *); void (*flush_buffer)(struct tty_struct *tty); ssize_t (*chars_in_buffer)(struct tty_struct *tty); - ssize_t (*read)(struct tty_struct * tty, struct file * file, - unsigned char __user * buf, size_t nr); - ssize_t (*write)(struct tty_struct * tty, struct file * file, - const unsigned char * buf, size_t nr); - int (*ioctl)(struct tty_struct * tty, struct file * file, + ssize_t (*read)(struct tty_struct *tty, struct file *file, + unsigned char __user *buf, size_t nr); + ssize_t (*write)(struct tty_struct *tty, struct file *file, + const unsigned char *buf, size_t nr); + int (*ioctl)(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); - long (*compat_ioctl)(struct tty_struct * tty, struct file * file, + long (*compat_ioctl)(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); - void (*set_termios)(struct tty_struct *tty, struct ktermios * old); + void (*set_termios)(struct tty_struct *tty, struct ktermios *old); unsigned int (*poll)(struct tty_struct *, struct file *, struct poll_table_struct *); int (*hangup)(struct tty_struct *tty); - + /* * The following routines are called from below. */ @@ -145,7 +145,7 @@ struct tty_ldisc_ops { void (*dcd_change)(struct tty_struct *, unsigned int); struct module *owner; - + int refcount; }; |