diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/Kbuild | 1 | ||||
| -rw-r--r-- | include/linux/if_strip.h | 27 | ||||
| -rw-r--r-- | include/linux/iio/buffer.h | 22 | ||||
| -rw-r--r-- | include/linux/iio/consumer.h | 34 | ||||
| -rw-r--r-- | include/linux/iio/dac/ad5421.h | 28 | ||||
| -rw-r--r-- | include/linux/iio/dac/ad5504.h | 16 | ||||
| -rw-r--r-- | include/linux/iio/dac/ad5791.h | 25 | ||||
| -rw-r--r-- | include/linux/iio/dac/max517.h | 15 | ||||
| -rw-r--r-- | include/linux/iio/dac/mcp4725.h | 16 | ||||
| -rw-r--r-- | include/linux/iio/events.h | 6 | ||||
| -rw-r--r-- | include/linux/iio/frequency/ad9523.h | 195 | ||||
| -rw-r--r-- | include/linux/iio/frequency/adf4350.h | 126 | ||||
| -rw-r--r-- | include/linux/iio/iio.h | 108 | ||||
| -rw-r--r-- | include/linux/iio/machine.h | 2 | ||||
| -rw-r--r-- | include/linux/iio/sysfs.h | 2 | ||||
| -rw-r--r-- | include/linux/iio/triggered_buffer.h | 15 | ||||
| -rw-r--r-- | include/linux/iio/types.h | 8 | ||||
| -rw-r--r-- | include/linux/platform_data/ad7266.h | 54 | ||||
| -rw-r--r-- | include/linux/pstore.h | 20 | ||||
| -rw-r--r-- | include/linux/pstore_ram.h | 33 |
20 files changed, 653 insertions, 100 deletions
diff --git a/include/linux/Kbuild b/include/linux/Kbuild index cb2a7d1..9547dad 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -183,7 +183,6 @@ header-y += if_ppp.h header-y += if_pppol2tp.h header-y += if_pppox.h header-y += if_slip.h -header-y += if_strip.h header-y += if_team.h header-y += if_tun.h header-y += if_tunnel.h diff --git a/include/linux/if_strip.h b/include/linux/if_strip.h deleted file mode 100644 index 6526a62..0000000 --- a/include/linux/if_strip.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * if_strip.h -- - * - * Definitions for the STRIP interface - * - * Copyright 1996 The Board of Trustees of The Leland Stanford - * Junior University. All Rights Reserved. - * - * Permission to use, copy, modify, and distribute this - * software and its documentation for any purpose and without - * fee is hereby granted, provided that the above copyright - * notice appear in all copies. Stanford University - * makes no representations about the suitability of this - * software for any purpose. It is provided "as is" without - * express or implied warranty. - */ - -#ifndef __LINUX_STRIP_H -#define __LINUX_STRIP_H - -#include <linux/types.h> - -typedef struct { - __u8 c[6]; -} MetricomAddress; - -#endif diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h index fb0fe46..8ba516f 100644 --- a/include/linux/iio/buffer.h +++ b/include/linux/iio/buffer.h @@ -85,7 +85,7 @@ struct iio_buffer { /** * iio_buffer_init() - Initialize the buffer structure - * @buffer: buffer to be initialized + * @buffer: buffer to be initialized **/ void iio_buffer_init(struct iio_buffer *buffer); @@ -107,8 +107,9 @@ int iio_scan_mask_query(struct iio_dev *indio_dev, /** * iio_scan_mask_set() - set particular bit in the scan mask - * @buffer: the buffer whose scan mask we are interested in - * @bit: the bit to be set. + * @indio_dev IIO device structure + * @buffer: the buffer whose scan mask we are interested in + * @bit: the bit to be set. **/ int iio_scan_mask_set(struct iio_dev *indio_dev, struct iio_buffer *buffer, int bit); @@ -116,8 +117,8 @@ int iio_scan_mask_set(struct iio_dev *indio_dev, /** * iio_push_to_buffer() - push to a registered buffer. * @buffer: IIO buffer structure for device - * @scan: Full scan. - * @timestamp: + * @data: the data to push to the buffer + * @timestamp: timestamp to associate with the data */ int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data, s64 timestamp); @@ -126,7 +127,9 @@ int iio_update_demux(struct iio_dev *indio_dev); /** * iio_buffer_register() - register the buffer with IIO core - * @indio_dev: device with the buffer to be registered + * @indio_dev: device with the buffer to be registered + * @channels: the channel descriptions used to construct buffer + * @num_channels: the number of channels **/ int iio_buffer_register(struct iio_dev *indio_dev, const struct iio_chan_spec *channels, @@ -134,7 +137,7 @@ int iio_buffer_register(struct iio_dev *indio_dev, /** * iio_buffer_unregister() - unregister the buffer from IIO core - * @indio_dev: the device with the buffer to be unregistered + * @indio_dev: the device with the buffer to be unregistered **/ void iio_buffer_unregister(struct iio_dev *indio_dev); @@ -174,6 +177,9 @@ ssize_t iio_buffer_show_enable(struct device *dev, int iio_sw_buffer_preenable(struct iio_dev *indio_dev); +bool iio_validate_scan_mask_onehot(struct iio_dev *indio_dev, + const unsigned long *mask); + #else /* CONFIG_IIO_BUFFER */ static inline int iio_buffer_register(struct iio_dev *indio_dev, @@ -184,7 +190,7 @@ static inline int iio_buffer_register(struct iio_dev *indio_dev, } static inline void iio_buffer_unregister(struct iio_dev *indio_dev) -{}; +{} #endif /* CONFIG_IIO_BUFFER */ diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h index 1a15e560..e2657e6 100644 --- a/include/linux/iio/consumer.h +++ b/include/linux/iio/consumer.h @@ -33,17 +33,17 @@ struct iio_channel { * side. This typically describes the channels use within * the consumer. E.g. 'battery_voltage' */ -struct iio_channel *iio_st_channel_get(const char *name, - const char *consumer_channel); +struct iio_channel *iio_channel_get(const char *name, + const char *consumer_channel); /** - * iio_st_channel_release() - release channels obtained via iio_st_channel_get + * iio_channel_release() - release channels obtained via iio_channel_get * @chan: The channel to be released. */ -void iio_st_channel_release(struct iio_channel *chan); +void iio_channel_release(struct iio_channel *chan); /** - * iio_st_channel_get_all() - get all channels associated with a client + * iio_channel_get_all() - get all channels associated with a client * @name: name of consumer device. * * Returns an array of iio_channel structures terminated with one with @@ -51,37 +51,37 @@ void iio_st_channel_release(struct iio_channel *chan); * This function is used by fairly generic consumers to get all the * channels registered as having this consumer. */ -struct iio_channel *iio_st_channel_get_all(const char *name); +struct iio_channel *iio_channel_get_all(const char *name); /** - * iio_st_channel_release_all() - reverse iio_st_get_all + * iio_channel_release_all() - reverse iio_channel_get_all * @chan: Array of channels to be released. */ -void iio_st_channel_release_all(struct iio_channel *chan); +void iio_channel_release_all(struct iio_channel *chan); /** - * iio_st_read_channel_raw() - read from a given channel + * iio_read_channel_raw() - read from a given channel * @channel: The channel being queried. * @val: Value read back. * * Note raw reads from iio channels are in adc counts and hence * scale will need to be applied if standard units required. */ -int iio_st_read_channel_raw(struct iio_channel *chan, - int *val); +int iio_read_channel_raw(struct iio_channel *chan, + int *val); /** - * iio_st_get_channel_type() - get the type of a channel + * iio_get_channel_type() - get the type of a channel * @channel: The channel being queried. * @type: The type of the channel. * * returns the enum iio_chan_type of the channel */ -int iio_st_get_channel_type(struct iio_channel *channel, - enum iio_chan_type *type); +int iio_get_channel_type(struct iio_channel *channel, + enum iio_chan_type *type); /** - * iio_st_read_channel_scale() - read the scale value for a channel + * iio_read_channel_scale() - read the scale value for a channel * @channel: The channel being queried. * @val: First part of value read back. * @val2: Second part of value read back. @@ -90,7 +90,7 @@ int iio_st_get_channel_type(struct iio_channel *channel, * as IIO_VAL_INT_PLUS_MICRO telling us we have a value of val * + val2/1e6 */ -int iio_st_read_channel_scale(struct iio_channel *chan, int *val, - int *val2); +int iio_read_channel_scale(struct iio_channel *chan, int *val, + int *val2); #endif diff --git a/include/linux/iio/dac/ad5421.h b/include/linux/iio/dac/ad5421.h new file mode 100644 index 0000000..8fd8f05 --- /dev/null +++ b/include/linux/iio/dac/ad5421.h @@ -0,0 +1,28 @@ +#ifndef __IIO_DAC_AD5421_H__ +#define __IIO_DAC_AD5421_H__ + +/** + * enum ad5421_current_range - Current range the AD5421 is configured for. + * @AD5421_CURRENT_RANGE_4mA_20mA: 4 mA to 20 mA (RANGE1,0 pins = 00) + * @AD5421_CURRENT_RANGE_3mA8_21mA: 3.8 mA to 21 mA (RANGE1,0 pins = x1) + * @AD5421_CURRENT_RANGE_3mA2_24mA: 3.2 mA to 24 mA (RANGE1,0 pins = 10) + */ + +enum ad5421_current_range { + AD5421_CURRENT_RANGE_4mA_20mA, + AD5421_CURRENT_RANGE_3mA8_21mA, + AD5421_CURRENT_RANGE_3mA2_24mA, +}; + +/** + * struct ad5421_platform_data - AD5421 DAC driver platform data + * @external_vref: whether an external reference voltage is used or not + * @current_range: Current range the AD5421 is configured for + */ + +struct ad5421_platform_data { + bool external_vref; + enum ad5421_current_range current_range; +}; + +#endif diff --git a/include/linux/iio/dac/ad5504.h b/include/linux/iio/dac/ad5504.h new file mode 100644 index 0000000..4389537 --- /dev/null +++ b/include/linux/iio/dac/ad5504.h @@ -0,0 +1,16 @@ +/* + * AD5504 SPI DAC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef SPI_AD5504_H_ +#define SPI_AD5504_H_ + +struct ad5504_platform_data { + u16 vref_mv; +}; + +#endif /* SPI_AD5504_H_ */ diff --git a/include/linux/iio/dac/ad5791.h b/include/linux/iio/dac/ad5791.h new file mode 100644 index 0000000..45ee281 --- /dev/null +++ b/include/linux/iio/dac/ad5791.h @@ -0,0 +1,25 @@ +/* + * AD5791 SPI DAC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef SPI_AD5791_H_ +#define SPI_AD5791_H_ + +/** + * struct ad5791_platform_data - platform specific information + * @vref_pos_mv: Vdd Positive Analog Supply Volatge (mV) + * @vref_neg_mv: Vdd Negative Analog Supply Volatge (mV) + * @use_rbuf_gain2: ext. amplifier connected in gain of two configuration + */ + +struct ad5791_platform_data { + u16 vref_pos_mv; + u16 vref_neg_mv; + bool use_rbuf_gain2; +}; + +#endif /* SPI_AD5791_H_ */ diff --git a/include/linux/iio/dac/max517.h b/include/linux/iio/dac/max517.h new file mode 100644 index 0000000..f6d1d25 --- /dev/null +++ b/include/linux/iio/dac/max517.h @@ -0,0 +1,15 @@ +/* + * MAX517 DAC driver + * + * Copyright 2011 Roland Stigge <stigge@antcom.de> + * + * Licensed under the GPL-2 or later. + */ +#ifndef IIO_DAC_MAX517_H_ +#define IIO_DAC_MAX517_H_ + +struct max517_platform_data { + u16 vref_mv[2]; +}; + +#endif /* IIO_DAC_MAX517_H_ */ diff --git a/include/linux/iio/dac/mcp4725.h b/include/linux/iio/dac/mcp4725.h new file mode 100644 index 0000000..91530e6 --- /dev/null +++ b/include/linux/iio/dac/mcp4725.h @@ -0,0 +1,16 @@ +/* + * MCP4725 DAC driver + * + * Copyright (C) 2012 Peter Meerwald <pmeerw@pmeerw.net> + * + * Licensed under the GPL-2 or later. + */ + +#ifndef IIO_DAC_MCP4725_H_ +#define IIO_DAC_MCP4725_H_ + +struct mcp4725_platform_data { + u16 vref_mv; +}; + +#endif /* IIO_DAC_MCP4725_H_ */ diff --git a/include/linux/iio/events.h b/include/linux/iio/events.h index b5acbf9..13ce220 100644 --- a/include/linux/iio/events.h +++ b/include/linux/iio/events.h @@ -46,7 +46,7 @@ enum iio_event_direction { * @diff: Whether the event is for an differential channel or not. * @modifier: Modifier for the channel. Should be one of enum iio_modifier. * @direction: Direction of the event. One of enum iio_event_direction. - * @type: Type of the event. Should be one enum iio_event_type. + * @type: Type of the event. Should be one of enum iio_event_type. * @chan: Channel number for non-differential channels. * @chan1: First channel number for differential channels. * @chan2: Second channel number for differential channels. @@ -69,7 +69,7 @@ enum iio_event_direction { * @chan_type: Type of the channel. Should be one of enum iio_chan_type. * @number: Channel number. * @modifier: Modifier for the channel. Should be one of enum iio_modifier. - * @type: Type of the event. Should be one enum iio_event_type. + * @type: Type of the event. Should be one of enum iio_event_type. * @direction: Direction of the event. One of enum iio_event_direction. */ @@ -81,7 +81,7 @@ enum iio_event_direction { * IIO_UNMOD_EVENT_CODE() - create event identifier for unmodified channels * @chan_type: Type of the channel. Should be one of enum iio_chan_type. * @number: Channel number. - * @type: Type of the event. Should be one enum iio_event_type. + * @type: Type of the event. Should be one of enum iio_event_type. * @direction: Direction of the event. One of enum iio_event_direction. */ diff --git a/include/linux/iio/frequency/ad9523.h b/include/linux/iio/frequency/ad9523.h new file mode 100644 index 0000000..12ce3ee --- /dev/null +++ b/include/linux/iio/frequency/ad9523.h @@ -0,0 +1,195 @@ +/* + * AD9523 SPI Low Jitter Clock Generator + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef IIO_FREQUENCY_AD9523_H_ +#define IIO_FREQUENCY_AD9523_H_ + +enum outp_drv_mode { + TRISTATE, + LVPECL_8mA, + LVDS_4mA, + LVDS_7mA, + HSTL0_16mA, + HSTL1_8mA, + CMOS_CONF1, + CMOS_CONF2, + CMOS_CONF3, + CMOS_CONF4, + CMOS_CONF5, + CMOS_CONF6, + CMOS_CONF7, + CMOS_CONF8, + CMOS_CONF9 +}; + +enum ref_sel_mode { + NONEREVERTIVE_STAY_ON_REFB, + REVERT_TO_REFA, + SELECT_REFA, + SELECT_REFB, + EXT_REF_SEL +}; + +/** + * struct ad9523_channel_spec - Output channel configuration + * + * @channel_num: Output channel number. + * @divider_output_invert_en: Invert the polarity of the output clock. + * @sync_ignore_en: Ignore chip-level SYNC signal. + * @low_power_mode_en: Reduce power used in the differential output modes. + * @use_alt_clock_src: Channel divider uses alternative clk source. + * @output_dis: Disables, powers down the entire channel. + * @driver_mode: Output driver mode (logic level family). + * @divider_phase: Divider initial phase after a SYNC. Range 0..63 + LSB = 1/2 of a period of the divider input clock. + * @channel_divider: 10-bit channel divider. + * @extended_name: Optional descriptive channel name. + */ + +struct ad9523_channel_spec { + unsigned channel_num; + bool divider_output_invert_en; + bool sync_ignore_en; + bool low_power_mode_en; + /* CH0..CH3 VCXO, CH4..CH9 VCO2 */ + bool use_alt_clock_src; + bool output_dis; + enum outp_drv_mode driver_mode; + unsigned char divider_phase; + unsigned short channel_divider; + char extended_name[16]; +}; + +enum pll1_rzero_resistor { + RZERO_883_OHM, + RZERO_677_OHM, + RZERO_341_OHM, + RZERO_135_OHM, + RZERO_10_OHM, + RZERO_USE_EXT_RES = 8, +}; + +enum rpole2_resistor { + RPOLE2_900_OHM, + RPOLE2_450_OHM, + RPOLE2_300_OHM, + RPOLE2_225_OHM, +}; + +enum rzero_resistor { + RZERO_3250_OHM, + RZERO_2750_OHM, + RZERO_2250_OHM, + RZERO_2100_OHM, + RZERO_3000_OHM, + RZERO_2500_OHM, + RZERO_2000_OHM, + RZERO_1850_OHM, +}; + +enum cpole1_capacitor { + CPOLE1_0_PF, + CPOLE1_8_PF, + CPOLE1_16_PF, + CPOLE1_24_PF, + _CPOLE1_24_PF, /* place holder */ + CPOLE1_32_PF, + CPOLE1_40_PF, + CPOLE1_48_PF, +}; + +/** + * struct ad9523_platform_data - platform specific information + * + * @vcxo_freq: External VCXO frequency in Hz + * @refa_diff_rcv_en: REFA differential/single-ended input selection. + * @refb_diff_rcv_en: REFB differential/single-ended input selection. + * @zd_in_diff_en: Zero Delay differential/single-ended input selection. + * @osc_in_diff_en: OSC differential/ single-ended input selection. + * @refa_cmos_neg_inp_en: REFA single-ended neg./pos. input enable. + * @refb_cmos_neg_inp_en: REFB single-ended neg./pos. input enable. + * @zd_in_cmos_neg_inp_en: Zero Delay single-ended neg./pos. input enable. + * @osc_in_cmos_neg_inp_en: OSC single-ended neg./pos. input enable. + * @refa_r_div: PLL1 10-bit REFA R divider. + * @refb_r_div: PLL1 10-bit REFB R divider. + * @pll1_feedback_div: PLL1 10-bit Feedback N divider. + * @pll1_charge_pump_current_nA: Magnitude of PLL1 charge pump current (nA). + * @zero_delay_mode_internal_en: Internal, external Zero Delay mode selection. + * @osc_in_feedback_en: PLL1 feedback path, local feedback from + * the OSC_IN receiver or zero delay mode + * @pll1_loop_filter_rzero: PLL1 Loop Filter Zero Resistor selection. + * @ref_mode: Reference selection mode. + * @pll2_charge_pump_current_nA: Magnitude of PLL2 charge pump current (nA). + * @pll2_ndiv_a_cnt: PLL2 Feedback N-divider, A Counter, range 0..4. + * @pll2_ndiv_b_cnt: PLL2 Feedback N-divider, B Counter, range 0..63. + * @pll2_freq_doubler_en: PLL2 frequency doubler enable. + * @pll2_r2_div: PLL2 R2 divider, range 0..31. + * @pll2_vco_diff_m1: VCO1 divider, range 3..5. + * @pll2_vco_diff_m2: VCO2 divider, range 3..5. + * @rpole2: PLL2 loop filter Rpole resistor value. + * @rzero: PLL2 loop filter Rzero resistor value. + * @cpole1: PLL2 loop filter Cpole capacitor value. + * @rzero_bypass_en: PLL2 loop filter Rzero bypass enable. + * @num_channels: Array size of struct ad9523_channel_spec. + * @channels: Pointer to channel array. + * @name: Optional alternative iio device name. + */ + +struct ad9523_platform_data { + unsigned long vcxo_freq; + + /* Differential/ Single-Ended Input Configuration */ + bool refa_diff_rcv_en; + bool refb_diff_rcv_en; + bool zd_in_diff_en; + bool osc_in_diff_en; + + /* + * Valid if differential input disabled + * if false defaults to pos input + */ + bool refa_cmos_neg_inp_en; + bool refb_cmos_neg_inp_en; + bool zd_in_cmos_neg_inp_en; + bool osc_in_cmos_neg_inp_en; + + /* PLL1 Setting */ + unsigned short refa_r_div; + unsigned short refb_r_div; + unsigned short pll1_feedback_div; + unsigned short pll1_charge_pump_current_nA; + bool zero_delay_mode_internal_en; + bool osc_in_feedback_en; + enum pll1_rzero_resistor pll1_loop_filter_rzero; + + /* Reference */ + enum ref_sel_mode ref_mode; + + /* PLL2 Setting */ + unsigned int pll2_charge_pump_current_nA; + unsigned char pll2_ndiv_a_cnt; + unsigned char pll2_ndiv_b_cnt; + bool pll2_freq_doubler_en; + unsigned char pll2_r2_div; + unsigned char pll2_vco_diff_m1; /* 3..5 */ + unsigned char pll2_vco_diff_m2; /* 3..5 */ + + /* Loop Filter PLL2 */ + enum rpole2_resistor rpole2; + enum rzero_resistor rzero; + enum cpole1_capacitor cpole1; + bool rzero_bypass_en; + + /* Output Channel Configuration */ + int num_channels; + struct ad9523_channel_spec *channels; + + char name[SPI_NAME_SIZE]; +}; + +#endif /* IIO_FREQUENCY_AD9523_H_ */ diff --git a/include/linux/iio/frequency/adf4350.h b/include/linux/iio/frequency/adf4350.h new file mode 100644 index 0000000..b76b4a8 --- /dev/null +++ b/include/linux/iio/frequency/adf4350.h @@ -0,0 +1,126 @@ +/* + * ADF4350/ADF4351 SPI PLL driver + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef IIO_PLL_ADF4350_H_ +#define IIO_PLL_ADF4350_H_ + +/* Registers */ +#define ADF4350_REG0 0 +#define ADF4350_REG1 1 +#define ADF4350_REG2 2 +#define ADF4350_REG3 3 +#define ADF4350_REG4 4 +#define ADF4350_REG5 5 + +/* REG0 Bit Definitions */ +#define ADF4350_REG0_FRACT(x) (((x) & 0xFFF) << 3) +#define ADF4350_REG0_INT(x) (((x) & 0xFFFF) << 15) + +/* REG1 Bit Definitions */ +#define ADF4350_REG1_MOD(x) (((x) & 0xFFF) << 3) +#define ADF4350_REG1_PHASE(x) (((x) & 0xFFF) << 15) +#define ADF4350_REG1_PRESCALER (1 << 27) + +/* REG2 Bit Definitions */ +#define ADF4350_REG2_COUNTER_RESET_EN (1 << 3) +#define ADF4350_REG2_CP_THREESTATE_EN (1 << 4) +#define ADF4350_REG2_POWER_DOWN_EN (1 << 5) +#define ADF4350_REG2_PD_POLARITY_POS (1 << 6) +#define ADF4350_REG2_LDP_6ns (1 << 7) +#define ADF4350_REG2_LDP_10ns (0 << 7) +#define ADF4350_REG2_LDF_FRACT_N (0 << 8) +#define ADF4350_REG2_LDF_INT_N (1 << 8) +#define ADF4350_REG2_CHARGE_PUMP_CURR_uA(x) (((((x)-312) / 312) & 0xF) << 9) +#define ADF4350_REG2_DOUBLE_BUFF_EN (1 << 13) +#define ADF4350_REG2_10BIT_R_CNT(x) ((x) << 14) +#define ADF4350_REG2_RDIV2_EN (1 << 24) +#define ADF4350_REG2_RMULT2_EN (1 << 25) +#define ADF4350_REG2_MUXOUT(x) ((x) << 26) +#define ADF4350_REG2_NOISE_MODE(x) ((x) << 29) +#define ADF4350_MUXOUT_THREESTATE 0 +#define ADF4350_MUXOUT_DVDD 1 +#define ADF4350_MUXOUT_GND 2 +#define ADF4350_MUXOUT_R_DIV_OUT 3 +#define ADF4350_MUXOUT_N_DIV_OUT 4 +#define ADF4350_MUXOUT_ANALOG_LOCK_DETECT 5 +#define ADF4350_MUXOUT_DIGITAL_LOCK_DETECT 6 + +/* REG3 Bit Definitions */ +#define ADF4350_REG3_12BIT_CLKDIV(x) ((x) << 3) +#define ADF4350_REG3_12BIT_CLKDIV_MODE(x) ((x) << 16) +#define ADF4350_REG3_12BIT_CSR_EN (1 << 18) +#define ADF4351_REG3_CHARGE_CANCELLATION_EN (1 << 21) +#define ADF4351_REG3_ANTI_BACKLASH_3ns_EN (1 << 22) +#define ADF4351_REG3_BAND_SEL_CLOCK_MODE_HIGH (1 << 23) + +/* REG4 Bit Definitions */ +#define ADF4350_REG4_OUTPUT_PWR(x) ((x) << 3) +#define ADF4350_REG4_RF_OUT_EN (1 << 5) +#define ADF4350_REG4_AUX_OUTPUT_PWR(x) ((x) << 6) +#define ADF4350_REG4_AUX_OUTPUT_EN (1 << 8) +#define ADF4350_REG4_AUX_OUTPUT_FUND (1 << 9) +#define ADF4350_REG4_AUX_OUTPUT_DIV (0 << 9) +#define ADF4350_REG4_MUTE_TILL_LOCK_EN (1 << 10) +#define ADF4350_REG4_VCO_PWRDOWN_EN (1 << 11) +#define ADF4350_REG4_8BIT_BAND_SEL_CLKDIV(x) ((x) << 12) +#define ADF4350_REG4_RF_DIV_SEL(x) ((x) << 20) +#define ADF4350_REG4_FEEDBACK_DIVIDED (0 << 23) +#define ADF4350_REG4_FEEDBACK_FUND (1 << 23) + +/* REG5 Bit Definitions */ +#define ADF4350_REG5_LD_PIN_MODE_LOW (0 << 22) +#define ADF4350_REG5_LD_PIN_MODE_DIGITAL (1 << 22) +#define ADF4350_REG5_LD_PIN_MODE_HIGH (3 << 22) + +/* Specifications */ +#define ADF4350_MAX_OUT_FREQ 4400000000ULL /* Hz */ +#define ADF4350_MIN_OUT_FREQ 137500000 /* Hz */ +#define ADF4351_MIN_OUT_FREQ 34375000 /* Hz */ +#define ADF4350_MIN_VCO_FREQ 2200000000ULL /* Hz */ +#define ADF4350_MAX_FREQ_45_PRESC 3000000000ULL /* Hz */ +#define ADF4350_MAX_FREQ_PFD 32000000 /* Hz */ +#define ADF4350_MAX_BANDSEL_CLK 125000 /* Hz */ +#define ADF4350_MAX_FREQ_REFIN 250000000 /* Hz */ +#define ADF4350_MAX_MODULUS 4095 + +/** + * struct adf4350_platform_data - platform specific information + * @name: Optional device name. + * @clkin: REFin frequency in Hz. + * @channel_spacing: Channel spacing in Hz (influences MODULUS). + * @power_up_frequency: Optional, If set in Hz the PLL tunes to the desired + * frequency on probe. + * @ref_div_factor: Optional, if set the driver skips dynamic calculation + * and uses this default value instead. + * @ref_doubler_en: Enables reference doubler. + * @ref_div2_en: Enables reference divider. + * @r2_user_settings: User defined settings for ADF4350/1 REGISTER_2. + * @r3_user_settings: User defined settings for ADF4350/1 REGISTER_3. + * @r4_user_settings: User defined settings for ADF4350/1 REGISTER_4. + * @gpio_lock_detect: Optional, if set with a valid GPIO number, + * pll lock state is tested upon read. + * If not used - set to -1. + */ + +struct adf4350_platform_data { + char name[32]; + unsigned long clkin; + unsigned long channel_spacing; + unsigned long long power_up_frequency; + + unsigned short ref_div_factor; /* 10-bit R counter */ + bool ref_doubler_en; + bool ref_div2_en; + + unsigned r2_user_settings; + unsigned r3_user_settings; + unsigned r4_user_settings; + int gpio_lock_detect; +}; + +#endif /* IIO_PLL_ADF4350_H_ */ diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 3a4f6a3..be82936 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -130,14 +130,78 @@ struct iio_chan_spec_ext_info { }; /** + * struct iio_enum - Enum channel info attribute + * @items: An array of strings. + * @num_items: Length of the item array. + * @set: Set callback function, may be NULL. + * @get: Get callback function, may be NULL. + * + * The iio_enum struct can be used to implement enum style channel attributes. + * Enum style attributes are those which have a set of strings which map to + * unsigned integer values. The IIO enum helper code takes care of mapping + * between value and string as well as generating a "_available" file which + * contains a list of all available items. The set callback will be called when + * the attribute is updated. The last parameter is the index to the newly + * activated item. The get callback will be used to query the currently active + * item and is supposed to return the index for it. + */ +struct iio_enum { + const char * const *items; + unsigned int num_items; + int (*set)(struct iio_dev *, const struct iio_chan_spec *, unsigned int); + int (*get)(struct iio_dev *, const struct iio_chan_spec *); +}; + +ssize_t iio_enum_available_read(struct iio_dev *indio_dev, + uintptr_t priv, const struct iio_chan_spec *chan, char *buf); +ssize_t iio_enum_read(struct iio_dev *indio_dev, + uintptr_t priv, const struct iio_chan_spec *chan, char *buf); +ssize_t iio_enum_write(struct iio_dev *indio_dev, + uintptr_t priv, const struct iio_chan_spec *chan, const char *buf, + size_t len); + +/** + * IIO_ENUM() - Initialize enum extended channel attribute + * @_name: Attribute name + * @_shared: Whether the attribute is shared between all channels + * @_e: Pointer to a iio_enum struct + * + * This should usually be used together with IIO_ENUM_AVAILABLE() + */ +#define IIO_ENUM(_name, _shared, _e) \ +{ \ + .name = (_name), \ + .shared = (_shared), \ + .read = iio_enum_read, \ + .write = iio_enum_write, \ + .private = (uintptr_t)(_e), \ +} + +/** + * IIO_ENUM_AVAILABLE() - Initialize enum available extended channel attribute + * @_name: Attribute name ("_available" will be appended to the name) + * @_e: Pointer to a iio_enum struct + * + * Creates a read only attribute which list all the available enum items in a + * space separated list. This should usually be used together with IIO_ENUM() + */ +#define IIO_ENUM_AVAILABLE(_name, _e) \ +{ \ + .name = (_name "_available"), \ + .shared = true, \ + .read = iio_enum_available_read, \ + .private = (uintptr_t)(_e), \ +} + +/** * struct iio_chan_spec - specification of a single channel * @type: What type of measurement is the channel making. - * @channel: What number or name do we wish to assign the channel. + * @channel: What number do we wish to assign the channel. * @channel2: If there is a second number for a differential * channel then this is it. If modified is set then the * value here specifies the modifier. * @address: Driver specific identifier. - * @scan_index: Monotonic index to give ordering in scans when read + * @scan_index: Monotonic index to give ordering in scans when read * from a buffer. * @scan_type: Sign: 's' or 'u' to specify signed or unsigned * realbits: Number of valid bits of data @@ -147,14 +211,14 @@ struct iio_chan_spec_ext_info { * endianness: little or big endian * @info_mask: What information is to be exported about this channel. * This includes calibbias, scale etc. - * @event_mask: What events can this channel produce. + * @event_mask: What events can this channel produce. * @ext_info: Array of extended info attributes for this channel. * The array is NULL terminated, the last element should - * have it's name field set to NULL. + * have its name field set to NULL. * @extend_name: Allows labeling of channel attributes with an * informative name. Note this has no effect codes etc, * unlike modifiers. - * @datasheet_name: A name used in in kernel mapping of channels. It should + * @datasheet_name: A name used in in-kernel mapping of channels. It should * correspond to the first name that the channel is referred * to by in the datasheet (e.g. IND), or the nearest * possible compound name (e.g. IND-INC). @@ -163,9 +227,8 @@ struct iio_chan_spec_ext_info { * channel2. Examples are IIO_MOD_X for axial sensors about * the 'x' axis. * @indexed: Specify the channel has a numerical index. If not, - * the value in channel will be suppressed for attribute - * but not for event codes. Typically set it to 0 when - * the index is false. + * the channel index number will be suppressed for sysfs + * attributes but not for event codes. * @differential: Channel is differential. */ struct iio_chan_spec { @@ -300,12 +363,16 @@ struct iio_info { * @predisable: [DRIVER] function to run prior to marking buffer * disabled * @postdisable: [DRIVER] function to run after marking buffer disabled + * @validate_scan_mask: [DRIVER] function callback to check whether a given + * scan mask is valid for the device. */ struct iio_buffer_setup_ops { int (*preenable)(struct iio_dev *); int (*postenable)(struct iio_dev *); int (*predisable)(struct iio_dev *); int (*postdisable)(struct iio_dev *); + bool (*validate_scan_mask)(struct iio_dev *indio_dev, + const unsigned long *scan_mask); }; /** @@ -329,7 +396,7 @@ struct iio_buffer_setup_ops { * @trig: [INTERN] current device trigger (buffer modes) * @pollfunc: [DRIVER] function run on trigger being received * @channels: [DRIVER] channel specification structure table - * @num_channels: [DRIVER] number of chanels specified in @channels. + * @num_channels: [DRIVER] number of channels specified in @channels. * @channel_attr_list: [INTERN] keep track of automatically created channel * attributes * @chan_attr_group: [INTERN] group for all attrs in base directory @@ -419,7 +486,7 @@ extern struct bus_type iio_bus_type; /** * iio_device_put() - reference counted deallocation of struct device - * @dev: the iio_device containing the device + * @indio_dev: IIO device structure containing the device **/ static inline void iio_device_put(struct iio_dev *indio_dev) { @@ -429,7 +496,7 @@ static inline void iio_device_put(struct iio_dev *indio_dev) /** * dev_to_iio_dev() - Get IIO device struct from a device struct - * @dev: The device embedded in the IIO device + * @dev: The device embedded in the IIO device * * Note: The device must be a IIO device, otherwise the result is undefined. */ @@ -438,11 +505,22 @@ static inline struct iio_dev *dev_to_iio_dev(struct device *dev) return container_of(dev, struct iio_dev, dev); } +/** + * iio_device_get() - increment reference count for the device + * @indio_dev: IIO device structure + * + * Returns: The passed IIO device + **/ +static inline struct iio_dev *iio_device_get(struct iio_dev *indio_dev) +{ + return indio_dev ? dev_to_iio_dev(get_device(&indio_dev->dev)) : NULL; +} + /* Can we make this smaller? */ #define IIO_ALIGN L1_CACHE_BYTES /** * iio_device_alloc() - allocate an iio_dev from a driver - * @sizeof_priv: Space to allocate for private structure. + * @sizeof_priv: Space to allocate for private structure. **/ struct iio_dev *iio_device_alloc(int sizeof_priv); @@ -459,13 +537,13 @@ static inline struct iio_dev *iio_priv_to_dev(void *priv) /** * iio_device_free() - free an iio_dev from a driver - * @dev: the iio_dev associated with the device + * @indio_dev: the iio_dev associated with the device **/ void iio_device_free(struct iio_dev *indio_dev); /** * iio_buffer_enabled() - helper function to test if the buffer is enabled - * @indio_dev: IIO device info structure for device + * @indio_dev: IIO device structure for device **/ static inline bool iio_buffer_enabled(struct iio_dev *indio_dev) { @@ -475,7 +553,7 @@ static inline bool iio_buffer_enabled(struct iio_dev *indio_dev) /** * iio_get_debugfs_dentry() - helper function to get the debugfs_dentry - * @indio_dev: IIO device info structure for device + * @indio_dev: IIO device structure for device **/ #if defined(CONFIG_DEBUG_FS) static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev) diff --git a/include/linux/iio/machine.h b/include/linux/iio/machine.h index 0b1f19b..400a453 100644 --- a/include/linux/iio/machine.h +++ b/include/linux/iio/machine.h @@ -14,7 +14,7 @@ * This is matched against the datasheet_name element * of struct iio_chan_spec. * @consumer_dev_name: Name to uniquely identify the consumer device. - * @consumer_channel: Unique name used to idenitify the channel on the + * @consumer_channel: Unique name used to identify the channel on the * consumer side. */ struct iio_map { diff --git a/include/linux/iio/sysfs.h b/include/linux/iio/sysfs.h index bfedb73..b7a934b 100644 --- a/include/linux/iio/sysfs.h +++ b/include/linux/iio/sysfs.h @@ -97,7 +97,7 @@ struct iio_const_attr { #define IIO_DEV_ATTR_SAMP_FREQ_AVAIL(_show) \ IIO_DEVICE_ATTR(sampling_frequency_available, S_IRUGO, _show, NULL, 0) /** - * IIO_CONST_ATTR_AVAIL_SAMP_FREQ - list available sampling frequencies + * IIO_CONST_ATTR_SAMP_FREQ_AVAIL - list available sampling frequencies * @_string: frequency string for the attribute * * Constant version diff --git a/include/linux/iio/triggered_buffer.h b/include/linux/iio/triggered_buffer.h new file mode 100644 index 0000000..c378ebe --- /dev/null +++ b/include/linux/iio/triggered_buffer.h @@ -0,0 +1,15 @@ +#ifndef _LINUX_IIO_TRIGGERED_BUFFER_H_ +#define _LINUX_IIO_TRIGGERED_BUFFER_H_ + +#include <linux/interrupt.h> + +struct iio_dev; +struct iio_buffer_setup_ops; + +int iio_triggered_buffer_setup(struct iio_dev *indio_dev, + irqreturn_t (*pollfunc_bh)(int irq, void *p), + irqreturn_t (*pollfunc_th)(int irq, void *p), + const struct iio_buffer_setup_ops *setup_ops); +void iio_triggered_buffer_cleanup(struct iio_dev *indio_dev); + +#endif diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h index 1b073b1..44e3977 100644 --- a/include/linux/iio/types.h +++ b/include/linux/iio/types.h @@ -11,7 +11,6 @@ #define _IIO_TYPES_H_ enum iio_chan_type { - /* real channel types */ IIO_VOLTAGE, IIO_CURRENT, IIO_POWER, @@ -28,6 +27,7 @@ enum iio_chan_type { IIO_TIMESTAMP, IIO_CAPACITANCE, IIO_ALTVOLTAGE, + IIO_CCT, }; enum iio_modifier { @@ -45,6 +45,12 @@ enum iio_modifier { IIO_MOD_X_OR_Y_OR_Z, IIO_MOD_LIGHT_BOTH, IIO_MOD_LIGHT_IR, + IIO_MOD_ROOT_SUM_SQUARED_X_Y, + IIO_MOD_SUM_SQUARED_X_Y_Z, + IIO_MOD_LIGHT_CLEAR, + IIO_MOD_LIGHT_RED, + IIO_MOD_LIGHT_GREEN, + IIO_MOD_LIGHT_BLUE, }; #define IIO_VAL_INT 1 diff --git a/include/linux/platform_data/ad7266.h b/include/linux/platform_data/ad7266.h new file mode 100644 index 0000000..eabfdcb --- /dev/null +++ b/include/linux/platform_data/ad7266.h @@ -0,0 +1,54 @@ +/* + * AD7266/65 SPI ADC driver + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef __IIO_ADC_AD7266_H__ +#define __IIO_ADC_AD7266_H__ + +/** + * enum ad7266_range - AD7266 reference voltage range + * @AD7266_RANGE_VREF: Device is configured for input range 0V - VREF + * (RANGE pin set to low) + * @AD7266_RANGE_2VREF: Device is configured for input range 0V - 2VREF + * (RANGE pin set to high) + */ +enum ad7266_range { + AD7266_RANGE_VREF, + AD7266_RANGE_2VREF, +}; + +/** + * enum ad7266_mode - AD7266 sample mode + * @AD7266_MODE_DIFF: Device is configured for full differential mode + * (SGL/DIFF pin set to low, AD0 pin set to low) + * @AD7266_MODE_PSEUDO_DIFF: Device is configured for pseudo differential mode + * (SGL/DIFF pin set to low, AD0 pin set to high) + * @AD7266_MODE_SINGLE_ENDED: Device is configured for single-ended mode + * (SGL/DIFF pin set to high) + */ +enum ad7266_mode { + AD7266_MODE_DIFF, + AD7266_MODE_PSEUDO_DIFF, + AD7266_MODE_SINGLE_ENDED, +}; + +/** + * struct ad7266_platform_data - Platform data for the AD7266 driver + * @range: Reference voltage range the device is configured for + * @mode: Sample mode the device is configured for + * @fixed_addr: Whether the address pins are hard-wired + * @addr_gpios: GPIOs used for controlling the address pins, only used if + * fixed_addr is set to false. + */ +struct ad7266_platform_data { + enum ad7266_range range; + enum ad7266_mode mode; + bool fixed_addr; + unsigned int addr_gpios[3]; +}; + +#endif diff --git a/include/linux/pstore.h b/include/linux/pstore.h index e1461e1..c892587 100644 --- a/include/linux/pstore.h +++ b/include/linux/pstore.h @@ -24,14 +24,22 @@ #include <linux/time.h> #include <linux/kmsg_dump.h> +#include <linux/mutex.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/errno.h> /* types */ enum pstore_type_id { PSTORE_TYPE_DMESG = 0, PSTORE_TYPE_MCE = 1, + PSTORE_TYPE_CONSOLE = 2, + PSTORE_TYPE_FTRACE = 3, PSTORE_TYPE_UNKNOWN = 255 }; +struct module; + struct pstore_info { struct module *owner; char *name; @@ -47,11 +55,23 @@ struct pstore_info { int (*write)(enum pstore_type_id type, enum kmsg_dump_reason reason, u64 *id, unsigned int part, size_t size, struct pstore_info *psi); + int (*write_buf)(enum pstore_type_id type, + enum kmsg_dump_reason reason, u64 *id, + unsigned int part, const char *buf, size_t size, + struct pstore_info *psi); int (*erase)(enum pstore_type_id type, u64 id, struct pstore_info *psi); void *data; }; + +#ifdef CONFIG_PSTORE_FTRACE +extern void pstore_ftrace_call(unsigned long ip, unsigned long parent_ip); +#else +static inline void pstore_ftrace_call(unsigned long ip, unsigned long parent_ip) +{ } +#endif + #ifdef CONFIG_PSTORE extern int pstore_register(struct pstore_info *); #else diff --git a/include/linux/pstore_ram.h b/include/linux/pstore_ram.h index 3b823d4..098d2a8 100644 --- a/include/linux/pstore_ram.h +++ b/include/linux/pstore_ram.h @@ -24,21 +24,7 @@ #include <linux/init.h> struct persistent_ram_buffer; - -struct persistent_ram_descriptor { - const char *name; - phys_addr_t size; -}; - -struct persistent_ram { - phys_addr_t start; - phys_addr_t size; - - int num_descs; - struct persistent_ram_descriptor *descs; - - struct list_head node; -}; +struct rs_control; struct persistent_ram_zone { phys_addr_t paddr; @@ -48,7 +34,6 @@ struct persistent_ram_zone { size_t buffer_size; /* ECC correction */ - bool ecc; char *par_buffer; char *par_header; struct rs_control *rs_decoder; @@ -56,22 +41,16 @@ struct persistent_ram_zone { int bad_blocks; int ecc_block_size; int ecc_size; - int ecc_symsize; - int ecc_poly; char *old_log; size_t old_log_size; }; -int persistent_ram_early_init(struct persistent_ram *ram); - -struct persistent_ram_zone * __init persistent_ram_new(phys_addr_t start, - size_t size, - bool ecc); +struct persistent_ram_zone * __devinit persistent_ram_new(phys_addr_t start, + size_t size, u32 sig, + int ecc_size); void persistent_ram_free(struct persistent_ram_zone *prz); void persistent_ram_zap(struct persistent_ram_zone *prz); -struct persistent_ram_zone *persistent_ram_init_ringbuffer(struct device *dev, - bool ecc); int persistent_ram_write(struct persistent_ram_zone *prz, const void *s, unsigned int count); @@ -93,8 +72,10 @@ struct ramoops_platform_data { unsigned long mem_size; unsigned long mem_address; unsigned long record_size; + unsigned long console_size; + unsigned long ftrace_size; int dump_oops; - bool ecc; + int ecc_size; }; #endif |