diff options
Diffstat (limited to 'sound/soc/codecs')
-rw-r--r-- | sound/soc/codecs/Kconfig | 3 | ||||
-rw-r--r-- | sound/soc/codecs/Makefile | 2 | ||||
-rw-r--r-- | sound/soc/codecs/ac97.c | 1 | ||||
-rw-r--r-- | sound/soc/codecs/cs4270.c | 262 | ||||
-rw-r--r-- | sound/soc/codecs/tlv320aic3x.c | 1274 | ||||
-rw-r--r-- | sound/soc/codecs/tlv320aic3x.h | 181 | ||||
-rw-r--r-- | sound/soc/codecs/wm8731.c | 9 | ||||
-rw-r--r-- | sound/soc/codecs/wm8750.c | 3 | ||||
-rw-r--r-- | sound/soc/codecs/wm8753.c | 8 | ||||
-rw-r--r-- | sound/soc/codecs/wm9712.c | 10 |
10 files changed, 1603 insertions, 150 deletions
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 7824880..898a7d3 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -37,3 +37,6 @@ config SND_SOC_CS4270_VD33_ERRATA bool depends on SND_SOC_CS4270 +config SND_SOC_TLV320AIC3X + tristate + depends on SND_SOC && I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 7ad78e3..c6e5338 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -4,6 +4,7 @@ snd-soc-wm8750-objs := wm8750.o snd-soc-wm8753-objs := wm8753.o snd-soc-wm9712-objs := wm9712.o snd-soc-cs4270-objs := cs4270.o +snd-soc-tlv320aic3x-objs := tlv320aic3x.o obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o obj-$(CONFIG_SND_SOC_WM8731) += snd-soc-wm8731.o @@ -11,3 +12,4 @@ obj-$(CONFIG_SND_SOC_WM8750) += snd-soc-wm8750.o obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o +obj-$(CONFIG_SND_SOC_TLV320AIC3X) += snd-soc-tlv320aic3x.o diff --git a/sound/soc/codecs/ac97.c b/sound/soc/codecs/ac97.c index 0b8a6f8..242130c 100644 --- a/sound/soc/codecs/ac97.c +++ b/sound/soc/codecs/ac97.c @@ -19,7 +19,6 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/device.h> -#include <sound/driver.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/ac97_codec.h> diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index dab22cc..bf2ab72 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -28,7 +28,6 @@ #include <linux/module.h> #include <linux/platform_device.h> -#include <sound/driver.h> #include <sound/core.h> #include <sound/soc.h> #include <sound/initval.h> @@ -48,12 +47,130 @@ struct cs4270_private { unsigned int mode; /* The mode (I2S or left-justified) */ }; -/* The number of MCLK/LRCK ratios supported by the CS4270 */ -#define NUM_MCLK_RATIOS 9 +/* + * The codec isn't really big-endian or little-endian, since the I2S + * interface requires data to be sent serially with the MSbit first. + * However, to support BE and LE I2S devices, we specify both here. That + * way, ALSA will always match the bit patterns. + */ +#define CS4270_FORMATS (SNDRV_PCM_FMTBIT_S8 | \ + SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE | \ + SNDRV_PCM_FMTBIT_S18_3LE | SNDRV_PCM_FMTBIT_S18_3BE | \ + SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S20_3BE | \ + SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE) + +#ifdef USE_I2C + +/* CS4270 registers addresses */ +#define CS4270_CHIPID 0x01 /* Chip ID */ +#define CS4270_PWRCTL 0x02 /* Power Control */ +#define CS4270_MODE 0x03 /* Mode Control */ +#define CS4270_FORMAT 0x04 /* Serial Format, ADC/DAC Control */ +#define CS4270_TRANS 0x05 /* Transition Control */ +#define CS4270_MUTE 0x06 /* Mute Control */ +#define CS4270_VOLA 0x07 /* DAC Channel A Volume Control */ +#define CS4270_VOLB 0x08 /* DAC Channel B Volume Control */ + +#define CS4270_FIRSTREG 0x01 +#define CS4270_LASTREG 0x08 +#define CS4270_NUMREGS (CS4270_LASTREG - CS4270_FIRSTREG + 1) -/* The actual MCLK/LRCK ratios, in increasing numerical order */ -static unsigned int mclk_ratios[NUM_MCLK_RATIOS] = - {64, 96, 128, 192, 256, 384, 512, 768, 1024}; +/* Bit masks for the CS4270 registers */ +#define CS4270_CHIPID_ID 0xF0 +#define CS4270_CHIPID_REV 0x0F +#define CS4270_PWRCTL_FREEZE 0x80 +#define CS4270_PWRCTL_PDN_ADC 0x20 +#define CS4270_PWRCTL_PDN_DAC 0x02 +#define CS4270_PWRCTL_PDN 0x01 +#define CS4270_MODE_SPEED_MASK 0x30 +#define CS4270_MODE_1X 0x00 +#define CS4270_MODE_2X 0x10 +#define CS4270_MODE_4X 0x20 +#define CS4270_MODE_SLAVE 0x30 +#define CS4270_MODE_DIV_MASK 0x0E +#define CS4270_MODE_DIV1 0x00 +#define CS4270_MODE_DIV15 0x02 +#define CS4270_MODE_DIV2 0x04 +#define CS4270_MODE_DIV3 0x06 +#define CS4270_MODE_DIV4 0x08 +#define CS4270_MODE_POPGUARD 0x01 +#define CS4270_FORMAT_FREEZE_A 0x80 +#define CS4270_FORMAT_FREEZE_B 0x40 +#define CS4270_FORMAT_LOOPBACK 0x20 +#define CS4270_FORMAT_DAC_MASK 0x18 +#define CS4270_FORMAT_DAC_LJ 0x00 +#define CS4270_FORMAT_DAC_I2S 0x08 +#define CS4270_FORMAT_DAC_RJ16 0x18 +#define CS4270_FORMAT_DAC_RJ24 0x10 +#define CS4270_FORMAT_ADC_MASK 0x01 +#define CS4270_FORMAT_ADC_LJ 0x00 +#define CS4270_FORMAT_ADC_I2S 0x01 +#define CS4270_TRANS_ONE_VOL 0x80 +#define CS4270_TRANS_SOFT 0x40 +#define CS4270_TRANS_ZERO 0x20 +#define CS4270_TRANS_INV_ADC_A 0x08 +#define CS4270_TRANS_INV_ADC_B 0x10 +#define CS4270_TRANS_INV_DAC_A 0x02 +#define CS4270_TRANS_INV_DAC_B 0x04 +#define CS4270_TRANS_DEEMPH 0x01 +#define CS4270_MUTE_AUTO 0x20 +#define CS4270_MUTE_ADC_A 0x08 +#define CS4270_MUTE_ADC_B 0x10 +#define CS4270_MUTE_POLARITY 0x04 +#define CS4270_MUTE_DAC_A 0x01 +#define CS4270_MUTE_DAC_B 0x02 + +/* + * Clock Ratio Selection for Master Mode with I2C enabled + * + * The data for this chart is taken from Table 5 of the CS4270 reference + * manual. + * + * This table is used to determine how to program the Mode Control register. + * It is also used by cs4270_set_dai_sysclk() to tell ALSA which sampling + * rates the CS4270 currently supports. + * + * Each element in this array corresponds to the ratios in mclk_ratios[]. + * These two arrays need to be in sync. + * + * 'speed_mode' is the corresponding bit pattern to be written to the + * MODE bits of the Mode Control Register + * + * 'mclk' is the corresponding bit pattern to be wirten to the MCLK bits of + * the Mode Control Register. + * + * In situations where a single ratio is represented by multiple speed + * modes, we favor the slowest speed. E.g, for a ratio of 128, we pick + * double-speed instead of quad-speed. However, the CS4270 errata states + * that Divide-By-1.5 can cause failures, so we avoid that mode where + * possible. + * + * ERRATA: There is an errata for the CS4270 where divide-by-1.5 does not + * work if VD = 3.3V. If this effects you, select the + * CONFIG_SND_SOC_CS4270_VD33_ERRATA Kconfig option, and the driver will + * never select any sample rates that require divide-by-1.5. + */ +static struct { + unsigned int ratio; + u8 speed_mode; + u8 mclk; +} cs4270_mode_ratios[] = { + {64, CS4270_MODE_4X, CS4270_MODE_DIV1}, +#ifndef CONFIG_SND_SOC_CS4270_VD33_ERRATA + {96, CS4270_MODE_4X, CS4270_MODE_DIV15}, +#endif + {128, CS4270_MODE_2X, CS4270_MODE_DIV1}, + {192, CS4270_MODE_4X, CS4270_MODE_DIV3}, + {256, CS4270_MODE_1X, CS4270_MODE_DIV1}, + {384, CS4270_MODE_2X, CS4270_MODE_DIV3}, + {512, CS4270_MODE_1X, CS4270_MODE_DIV2}, + {768, CS4270_MODE_1X, CS4270_MODE_DIV3}, + {1024, CS4270_MODE_1X, CS4270_MODE_DIV4} +}; + +/* The number of MCLK/LRCK ratios supported by the CS4270 */ +#define NUM_MCLK_RATIOS ARRAY_SIZE(cs4270_mode_ratios) /* * Determine the CS4270 samples rates. @@ -97,7 +214,7 @@ static int cs4270_set_dai_sysclk(struct snd_soc_codec_dai *codec_dai, cs4270->mclk = freq; for (i = 0; i < NUM_MCLK_RATIOS; i++) { - unsigned int rate = freq / mclk_ratios[i]; + unsigned int rate = freq / cs4270_mode_ratios[i].ratio; rates |= snd_pcm_rate_to_rate_bit(rate); if (rate < rate_min) rate_min = rate; @@ -155,80 +272,6 @@ static int cs4270_set_dai_fmt(struct snd_soc_codec_dai *codec_dai, } /* - * The codec isn't really big-endian or little-endian, since the I2S - * interface requires data to be sent serially with the MSbit first. - * However, to support BE and LE I2S devices, we specify both here. That - * way, ALSA will always match the bit patterns. - */ -#define CS4270_FORMATS (SNDRV_PCM_FMTBIT_S8 | \ - SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE | \ - SNDRV_PCM_FMTBIT_S18_3LE | SNDRV_PCM_FMTBIT_S18_3BE | \ - SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S20_3BE | \ - SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE | \ - SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE) - -#ifdef USE_I2C - -/* CS4270 registers addresses */ -#define CS4270_CHIPID 0x01 /* Chip ID */ -#define CS4270_PWRCTL 0x02 /* Power Control */ -#define CS4270_MODE 0x03 /* Mode Control */ -#define CS4270_FORMAT 0x04 /* Serial Format, ADC/DAC Control */ -#define CS4270_TRANS 0x05 /* Transition Control */ -#define CS4270_MUTE 0x06 /* Mute Control */ -#define CS4270_VOLA 0x07 /* DAC Channel A Volume Control */ -#define CS4270_VOLB 0x08 /* DAC Channel B Volume Control */ - -#define CS4270_FIRSTREG 0x01 -#define CS4270_LASTREG 0x08 -#define CS4270_NUMREGS (CS4270_LASTREG - CS4270_FIRSTREG + 1) - -/* Bit masks for the CS4270 registers */ -#define CS4270_CHIPID_ID 0xF0 -#define CS4270_CHIPID_REV 0x0F -#define CS4270_PWRCTL_FREEZE 0x80 -#define CS4270_PWRCTL_PDN_ADC 0x20 -#define CS4270_PWRCTL_PDN_DAC 0x02 -#define CS4270_PWRCTL_PDN 0x01 -#define CS4270_MODE_SPEED_MASK 0x30 -#define CS4270_MODE_1X 0x00 -#define CS4270_MODE_2X 0x10 -#define CS4270_MODE_4X 0x20 -#define CS4270_MODE_SLAVE 0x30 -#define CS4270_MODE_DIV_MASK 0x0E -#define CS4270_MODE_DIV1 0x00 -#define CS4270_MODE_DIV15 0x02 -#define CS4270_MODE_DIV2 0x04 -#define CS4270_MODE_DIV3 0x06 -#define CS4270_MODE_DIV4 0x08 -#define CS4270_MODE_POPGUARD 0x01 -#define CS4270_FORMAT_FREEZE_A 0x80 -#define CS4270_FORMAT_FREEZE_B 0x40 -#define CS4270_FORMAT_LOOPBACK 0x20 -#define CS4270_FORMAT_DAC_MASK 0x18 -#define CS4270_FORMAT_DAC_LJ 0x00 -#define CS4270_FORMAT_DAC_I2S 0x08 -#define CS4270_FORMAT_DAC_RJ16 0x18 -#define CS4270_FORMAT_DAC_RJ24 0x10 -#define CS4270_FORMAT_ADC_MASK 0x01 -#define CS4270_FORMAT_ADC_LJ 0x00 -#define CS4270_FORMAT_ADC_I2S 0x01 -#define CS4270_TRANS_ONE_VOL 0x80 -#define CS4270_TRANS_SOFT 0x40 -#define CS4270_TRANS_ZERO 0x20 -#define CS4270_TRANS_INV_ADC_A 0x08 -#define CS4270_TRANS_INV_ADC_B 0x10 -#define CS4270_TRANS_INV_DAC_A 0x02 -#define CS4270_TRANS_INV_DAC_B 0x04 -#define CS4270_TRANS_DEEMPH 0x01 -#define CS4270_MUTE_AUTO 0x20 -#define CS4270_MUTE_ADC_A 0x08 -#define CS4270_MUTE_ADC_B 0x10 -#define CS4270_MUTE_POLARITY 0x04 -#define CS4270_MUTE_DAC_A 0x01 -#define CS4270_MUTE_DAC_B 0x02 - -/* * A list of addresses on which this CS4270 could use. I2C addresses are * 7 bits. For the CS4270, the upper four bits are always 1001, and the * lower three bits are determined via the AD2, AD1, and AD0 pins @@ -315,53 +358,6 @@ static int cs4270_i2c_write(struct snd_soc_codec *codec, unsigned int reg, } /* - * Clock Ratio Selection for Master Mode with I2C enabled - * - * The data for this chart is taken from Table 5 of the CS4270 reference - * manual. - * - * This table is used to determine how to program the Mode Control register. - * It is also used by cs4270_set_dai_sysclk() to tell ALSA which sampling - * rates the CS4270 currently supports. - * - * Each element in this array corresponds to the ratios in mclk_ratios[]. - * These two arrays need to be in sync. - * - * 'speed_mode' is the corresponding bit pattern to be written to the - * MODE bits of the Mode Control Register - * - * 'mclk' is the corresponding bit pattern to be wirten to the MCLK bits of - * the Mode Control Register. - * - * In situations where a single ratio is represented by multiple speed - * modes, we favor the slowest speed. E.g, for a ratio of 128, we pick - * double-speed instead of quad-speed. However, the CS4270 errata states - * that Divide-By-1.5 can cause failures, so we avoid that mode where - * possible. - * - * ERRATA: There is an errata for the CS4270 where divide-by-1.5 does not - * work if VD = 3.3V. If this effects you, select the - * CONFIG_SND_SOC_CS4270_VD33_ERRATA Kconfig option, and the driver will - * never select any sample rates that require divide-by-1.5. - */ -static struct { - u8 speed_mode; - u8 mclk; -} cs4270_mode_ratios[NUM_MCLK_RATIOS] = { - {CS4270_MODE_4X, CS4270_MODE_DIV1}, /* 64 */ -#ifndef CONFIG_SND_SOC_CS4270_VD33_ERRATA - {CS4270_MODE_4X, CS4270_MODE_DIV15}, /* 96 */ -#endif - {CS4270_MODE_2X, CS4270_MODE_DIV1}, /* 128 */ - {CS4270_MODE_4X, CS4270_MODE_DIV3}, /* 192 */ - {CS4270_MODE_1X, CS4270_MODE_DIV1}, /* 256 */ - {CS4270_MODE_2X, CS4270_MODE_DIV3}, /* 384 */ - {CS4270_MODE_1X, CS4270_MODE_DIV2}, /* 512 */ - {CS4270_MODE_1X, CS4270_MODE_DIV3}, /* 768 */ - {CS4270_MODE_1X, CS4270_MODE_DIV4} /* 1024 */ -}; - -/* * Program the CS4270 with the given hardware parameters. * * The .dai_ops functions are used to provide board-specific data, like @@ -388,7 +384,7 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, ratio = cs4270->mclk / rate; /* MCLK/LRCK ratio */ for (i = 0; i < NUM_MCLK_RATIOS; i++) { - if (mclk_ratios[i] == ratio) + if (cs4270_mode_ratios[i].ratio == ratio) break; } @@ -669,7 +665,7 @@ error: return ret; } -#endif +#endif /* USE_I2C*/ struct snd_soc_codec_dai cs4270_dai = { .name = "CS4270", @@ -687,10 +683,6 @@ struct snd_soc_codec_dai cs4270_dai = { .rates = 0, .formats = CS4270_FORMATS, }, - .dai_ops = { - .set_sysclk = cs4270_set_dai_sysclk, - .set_fmt = cs4270_set_dai_fmt, - } }; EXPORT_SYMBOL_GPL(cs4270_dai); @@ -752,6 +744,8 @@ static int cs4270_probe(struct platform_device *pdev) if (codec->control_data) { /* Initialize codec ops */ cs4270_dai.ops.hw_params = cs4270_hw_params; + cs4270_dai.dai_ops.set_sysclk = cs4270_set_dai_sysclk; + cs4270_dai.dai_ops.set_fmt = cs4270_set_dai_fmt; #ifdef CONFIG_SND_SOC_CS4270_HWMUTE cs4270_dai.dai_ops.digital_mute = cs4270_mute; #endif diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c new file mode 100644 index 0000000..710e028 --- /dev/null +++ b/sound/soc/codecs/tlv320aic3x.c @@ -0,0 +1,1274 @@ +/* + * ALSA SoC TLV320AIC3X codec driver + * + * Author: Vladimir Barinov, <vbarinov@ru.mvista.com> + * Copyright: (C) 2007 MontaVista Software, Inc., <source@mvista.com> + * + * Based on sound/soc/codecs/wm8753.c by Liam Girdwood + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Notes: + * The AIC3X is a driver for a low power stereo audio + * codecs aic31, aic32, aic33. + * + * It supports full aic33 codec functionality. + * The compatibility with aic32, aic31 is as follows: + * aic32 | aic31 + * --------------------------------------- + * MONO_LOUT -> N/A | MONO_LOUT -> N/A + * | IN1L -> LINE1L + * | IN1R -> LINE1R + * | IN2L -> LINE2L + * | IN2R -> LINE2R + * | MIC3L/R -> N/A + * truncated internal functionality in + * accordance with documentation + * --------------------------------------- + * + * Hence the machine layer should disable unsupported inputs/outputs by + * snd_soc_dapm_set_endpoint(codec, "MONO_LOUT", 0), etc. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> + +#include "tlv320aic3x.h" + +#define AUDIO_NAME "aic3x" +#define AIC3X_VERSION "0.1" + +/* codec private data */ +struct aic3x_priv { + unsigned int sysclk; + int master; +}; + +/* + * AIC3X register cache + * We can't read the AIC3X register space when we are + * using 2 wire for device control, so we cache them instead. + * There is no point in caching the reset register + */ +static const u8 aic3x_reg[AIC3X_CACHEREGNUM] = { + 0x00, 0x00, 0x00, 0x10, /* 0 */ + 0x04, 0x00, 0x00, 0x00, /* 4 */ + 0x00, 0x00, 0x00, 0x01, /* 8 */ + 0x00, 0x00, 0x00, 0x80, /* 12 */ + 0x80, 0xff, 0xff, 0x78, /* 16 */ + 0x78, 0x78, 0x78, 0x78, /* 20 */ + 0x78, 0x00, 0x00, 0xfe, /* 24 */ + 0x00, 0x00, 0xfe, 0x00, /* 28 */ + 0x18, 0x18, 0x00, 0x00, /* 32 */ + 0x00, 0x00, 0x00, 0x00, /* 36 */ + 0x00, 0x00, 0x00, 0x80, /* 40 */ + 0x80, 0x00, 0x00, 0x00, /* 44 */ + 0x00, 0x00, 0x00, 0x04, /* 48 */ + 0x00, 0x00, 0x00, 0x00, /* 52 */ + 0x00, 0x00, 0x04, 0x00, /* 56 */ + 0x00, 0x00, 0x00, 0x00, /* 60 */ + 0x00, 0x04, 0x00, 0x00, /* 64 */ + 0x00, 0x00, 0x00, 0x00, /* 68 */ + 0x04, 0x00, 0x00, 0x00, /* 72 */ + 0x00, 0x00, 0x00, 0x00, /* 76 */ + 0x00, 0x00, 0x00, 0x00, /* 80 */ + 0x00, 0x00, 0x00, 0x00, /* 84 */ + 0x00, 0x00, 0x00, 0x00, /* 88 */ + 0x00, 0x00, 0x00, 0x00, /* 92 */ + 0x00, 0x00, 0x00, 0x00, /* 96 */ + 0x00, 0x00, 0x02, /* 100 */ +}; + +/* + * read aic3x register cache + */ +static inline unsigned int aic3x_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + u8 *cache = codec->reg_cache; + if (reg >= AIC3X_CACHEREGNUM) + return -1; + return cache[reg]; +} + +/* + * write aic3x register cache + */ +static inline void aic3x_write_reg_cache(struct snd_soc_codec *codec, + u8 reg, u8 value) +{ + u8 *cache = codec->reg_cache; + if (reg >= AIC3X_CACHEREGNUM) + return; + cache[reg] = value; +} + +/* + * write to the aic3x register space + */ +static int aic3x_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + u8 data[2]; + + /* data is + * D15..D8 aic3x register offset + * D7...D0 register data + */ + data[0] = reg & 0xff; + data[1] = value & 0xff; + + aic3x_write_reg_cache(codec, data[0], data[1]); + if (codec->hw_write(codec->control_data, data, 2) == 2) + return 0; + else + return -EIO; +} + +#define SOC_DAPM_SINGLE_AIC3X(xname, reg, shift, mask, invert) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .info = snd_soc_info_volsw, \ + .get = snd_soc_dapm_get_volsw, .put = snd_soc_dapm_put_volsw_aic3x, \ + .private_value = SOC_SINGLE_VALUE(reg, shift, mask, invert) } + +/* + * All input lines are connected when !0xf and disconnected with 0xf bit field, + * so we have to use specific dapm_put call for input mixer + */ +static int snd_soc_dapm_put_volsw_aic3x(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol); + int reg = kcontrol->private_value & 0xff; + int shift = (kcontrol->private_value >> 8) & 0x0f; + int mask = (kcontrol->private_value >> 16) & 0xff; + int invert = (kcontrol->private_value >> 24) & 0x01; + unsigned short val, val_mask; + int ret; + struct snd_soc_dapm_path *path; + int found = 0; + + val = (ucontrol->value.integer.value[0] & mask); + + mask = 0xf; + if (val) + val = mask; + + if (invert) + val = mask - val; + val_mask = mask << shift; + val = val << shift; + + mutex_lock(&widget->codec->mutex); + + if (snd_soc_test_bits(widget->codec, reg, val_mask, val)) { + /* find dapm widget path assoc with kcontrol */ + list_for_each_entry(path, &widget->codec->dapm_paths, list) { + if (path->kcontrol != kcontrol) + continue; + + /* found, now check type */ + found = 1; + if (val) + /* new connection */ + path->connect = invert ? 0 : 1; + else + /* old connection must be powered down */ + path->connect = invert ? 1 : 0; + break; + } + + if (found) + snd_soc_dapm_sync_endpoints(widget->codec); + } + + ret = snd_soc_update_bits(widget->codec, reg, val_mask, val); + + mutex_unlock(&widget->codec->mutex); + return ret; +} + +static const char *aic3x_left_dac_mux[] = { "DAC_L1", "DAC_L3", "DAC_L2" }; +static const char *aic3x_right_dac_mux[] = { "DAC_R1", "DAC_R3", "DAC_R2" }; +static const char *aic3x_left_hpcom_mux[] = + { "differential of HPLOUT", "constant VCM", "single-ended" }; +static const char *aic3x_right_hpcom_mux[] = + { "differential of HPROUT", "constant VCM", "single-ended", + "differential of HPLCOM", "external feedback" }; +static const char *aic3x_linein_mode_mux[] = { "single-ended", "differential" }; + +#define LDAC_ENUM 0 +#define RDAC_ENUM 1 +#define LHPCOM_ENUM 2 +#define RHPCOM_ENUM 3 +#define LINE1L_ENUM 4 +#define LINE1R_ENUM 5 +#define LINE2L_ENUM 6 +#define LINE2R_ENUM 7 + +static const struct soc_enum aic3x_enum[] = { + SOC_ENUM_SINGLE(DAC_LINE_MUX, 6, 3, aic3x_left_dac_mux), + SOC_ENUM_SINGLE(DAC_LINE_MUX, 4, 3, aic3x_right_dac_mux), + SOC_ENUM_SINGLE(HPLCOM_CFG, 4, 3, aic3x_left_hpcom_mux), + SOC_ENUM_SINGLE(HPRCOM_CFG, 3, 5, aic3x_right_hpcom_mux), + SOC_ENUM_SINGLE(LINE1L_2_LADC_CTRL, 7, 2, aic3x_linein_mode_mux), + SOC_ENUM_SINGLE(LINE1R_2_RADC_CTRL, 7, 2, aic3x_linein_mode_mux), + SOC_ENUM_SINGLE(LINE2L_2_LADC_CTRL, 7, 2, aic3x_linein_mode_mux), + SOC_ENUM_SINGLE(LINE2R_2_RADC_CTRL, 7, 2, aic3x_linein_mode_mux), +}; + +static const struct snd_kcontrol_new aic3x_snd_controls[] = { + /* Output */ + SOC_DOUBLE_R("PCM Playback Volume", LDAC_VOL, RDAC_VOL, 0, 0x7f, 1), + + SOC_DOUBLE_R("Line DAC Playback Volume", DACL1_2_LLOPM_VOL, + DACR1_2_RLOPM_VOL, 0, 0x7f, 1), + SOC_DOUBLE_R("Line DAC Playback Switch", LLOPM_CTRL, RLOPM_CTRL, 3, + 0x01, 0), + SOC_DOUBLE_R("Line PGA Bypass Playback Volume", PGAL_2_LLOPM_VOL, + PGAR_2_RLOPM_VOL, 0, 0x7f, 1), + SOC_DOUBLE_R("Line Line2 Bypass Playback Volume", LINE2L_2_LLOPM_VOL, + LINE2R_2_RLOPM_VOL, 0, 0x7f, 1), + + SOC_DOUBLE_R("Mono DAC Playback Volume", DACL1_2_MONOLOPM_VOL, + DACR1_2_MONOLOPM_VOL, 0, 0x7f, 1), + SOC_SINGLE("Mono DAC Playback Switch", MONOLOPM_CTRL, 3, 0x01, 0), + SOC_DOUBLE_R("Mono PGA Bypass Playback Volume", PGAL_2_MONOLOPM_VOL, + PGAR_2_MONOLOPM_VOL, 0, 0x7f, 1), + SOC_DOUBLE_R("Mono Line2 Bypass Playback Volume", LINE2L_2_MONOLOPM_VOL, + LINE2R_2_MONOLOPM_VOL, 0, 0x7f, 1), + + SOC_DOUBLE_R("HP DAC Playback Volume", DACL1_2_HPLOUT_VOL, + DACR1_2_HPROUT_VOL, 0, 0x7f, 1), + SOC_DOUBLE_R("HP DAC Playback Switch", HPLOUT_CTRL, HPROUT_CTRL, 3, + 0x01, 0), + SOC_DOUBLE_R("HP PGA Bypass Playback Volume", PGAL_2_HPLOUT_VOL, + PGAR_2_HPROUT_VOL, 0, 0x7f, 1), + SOC_DOUBLE_R("HP Line2 Bypass Playback Volume", LINE2L_2_HPLOUT_VOL, + LINE2R_2_HPROUT_VOL, 0, 0x7f, 1), + + SOC_DOUBLE_R("HPCOM DAC Playback Volume", DACL1_2_HPLCOM_VOL, + DACR1_2_HPRCOM_VOL, 0, 0x7f, 1), + SOC_DOUBLE_R("HPCOM DAC Playback Switch", HPLCOM_CTRL, HPRCOM_CTRL, 3, + 0x01, 0), + SOC_DOUBLE_R("HPCOM PGA Bypass Playback Volume", PGAL_2_HPLCOM_VOL, + PGAR_2_HPRCOM_VOL, 0, 0x7f, 1), + SOC_DOUBLE_R("HPCOM Line2 Bypass Playback Volume", LINE2L_2_HPLCOM_VOL, + LINE2R_2_HPRCOM_VOL, 0, 0x7f, 1), + + /* + * Note: enable Automatic input Gain Controller with care. It can + * adjust PGA to max value when ADC is on and will never go back. + */ + SOC_DOUBLE_R("AGC Switch", LAGC_CTRL_A, RAGC_CTRL_A, 7, 0x01, 0), + + /* Input */ + SOC_DOUBLE_R("PGA Capture Volume", LADC_VOL, RADC_VOL, 0, 0x7f, 0), + SOC_DOUBLE_R("PGA Capture Switch", LADC_VOL, RADC_VOL, 7, 0x01, 1), +}; + +/* add non dapm controls */ +static int aic3x_add_controls(struct snd_soc_codec *codec) +{ + int err, i; + + for (i = 0; i < ARRAY_SIZE(aic3x_snd_controls); i++) { + err = snd_ctl_add(codec->card, + snd_soc_cnew(&aic3x_snd_controls[i], + codec, NULL)); + if (err < 0) + return err; + } + + return 0; +} + +/* Left DAC Mux */ +static const struct snd_kcontrol_new aic3x_left_dac_mux_controls = +SOC_DAPM_ENUM("Route", aic3x_enum[LDAC_ENUM]); + +/* Right DAC Mux */ +static const struct snd_kcontrol_new aic3x_right_dac_mux_controls = +SOC_DAPM_ENUM("Route", aic3x_enum[RDAC_ENUM]); + +/* Left HPCOM Mux */ +static const struct snd_kcontrol_new aic3x_left_hpcom_mux_controls = +SOC_DAPM_ENUM("Route", aic3x_enum[LHPCOM_ENUM]); + +/* Right HPCOM Mux */ +static const struct snd_kcontrol_new aic3x_right_hpcom_mux_controls = +SOC_DAPM_ENUM("Route", aic3x_enum[RHPCOM_ENUM]); + +/* Left DAC_L1 Mixer */ +static const struct snd_kcontrol_new aic3x_left_dac_mixer_controls[] = { + SOC_DAPM_SINGLE("Line Switch", DACL1_2_LLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("Mono Switch", DACL1_2_MONOLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("HP Switch", DACL1_2_HPLOUT_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("HPCOM Switch", DACL1_2_HPLCOM_VOL, 7, 1, 0), +}; + +/* Right DAC_R1 Mixer */ +static const struct snd_kcontrol_new aic3x_right_dac_mixer_controls[] = { + SOC_DAPM_SINGLE("Line Switch", DACR1_2_RLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("Mono Switch", DACR1_2_MONOLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("HP Switch", DACR1_2_HPROUT_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("HPCOM Switch", DACR1_2_HPRCOM_VOL, 7, 1, 0), +}; + +/* Left PGA Mixer */ +static const struct snd_kcontrol_new aic3x_left_pga_mixer_controls[] = { + SOC_DAPM_SINGLE_AIC3X("Line1L Switch", LINE1L_2_LADC_CTRL, 3, 1, 1), + SOC_DAPM_SINGLE_AIC3X("Line2L Switch", LINE2L_2_LADC_CTRL, 3, 1, 1), + SOC_DAPM_SINGLE_AIC3X("Mic3L Switch", MIC3LR_2_LADC_CTRL, 4, 1, 1), +}; + +/* Right PGA Mixer */ +static const struct snd_kcontrol_new aic3x_right_pga_mixer_controls[] = { + SOC_DAPM_SINGLE_AIC3X("Line1R Switch", LINE1R_2_RADC_CTRL, 3, 1, 1), + SOC_DAPM_SINGLE_AIC3X("Line2R Switch", LINE2R_2_RADC_CTRL, 3, 1, 1), + SOC_DAPM_SINGLE_AIC3X("Mic3R Switch", MIC3LR_2_RADC_CTRL, 0, 1, 1), +}; + +/* Left Line1 Mux */ +static const struct snd_kcontrol_new aic3x_left_line1_mux_controls = +SOC_DAPM_ENUM("Route", aic3x_enum[LINE1L_ENUM]); + +/* Right Line1 Mux */ +static const struct snd_kcontrol_new aic3x_right_line1_mux_controls = +SOC_DAPM_ENUM("Route", aic3x_enum[LINE1R_ENUM]); + +/* Left Line2 Mux */ +static const struct snd_kcontrol_new aic3x_left_line2_mux_controls = +SOC_DAPM_ENUM("Route", aic3x_enum[LINE2L_ENUM]); + +/* Right Line2 Mux */ +static const struct snd_kcontrol_new aic3x_right_line2_mux_controls = +SOC_DAPM_ENUM("Route", aic3x_enum[LINE2R_ENUM]); + +/* Left PGA Bypass Mixer */ +static const struct snd_kcontrol_new aic3x_left_pga_bp_mixer_controls[] = { + SOC_DAPM_SINGLE("Line Switch", PGAL_2_LLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("Mono Switch", PGAL_2_MONOLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("HP Switch", PGAL_2_HPLOUT_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("HPCOM Switch", PGAL_2_HPLCOM_VOL, 7, 1, 0), +}; + +/* Right PGA Bypass Mixer */ +static const struct snd_kcontrol_new aic3x_right_pga_bp_mixer_controls[] = { + SOC_DAPM_SINGLE("Line Switch", PGAR_2_RLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("Mono Switch", PGAR_2_MONOLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("HP Switch", PGAR_2_HPROUT_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("HPCOM Switch", PGAR_2_HPRCOM_VOL, 7, 1, 0), +}; + +/* Left Line2 Bypass Mixer */ +static const struct snd_kcontrol_new aic3x_left_line2_bp_mixer_controls[] = { + SOC_DAPM_SINGLE("Line Switch", LINE2L_2_LLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("Mono Switch", LINE2L_2_MONOLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("HP Switch", LINE2L_2_HPLOUT_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("HPCOM Switch", LINE2L_2_HPLCOM_VOL, 7, 1, 0), +}; + +/* Right Line2 Bypass Mixer */ +static const struct snd_kcontrol_new aic3x_right_line2_bp_mixer_controls[] = { + SOC_DAPM_SINGLE("Line Switch", LINE2R_2_RLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("Mono Switch", LINE2R_2_MONOLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("HP Switch", LINE2R_2_HPROUT_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("HPCOM Switch", LINE2R_2_HPRCOM_VOL, 7, 1, 0), +}; + +static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = { + /* Left DAC to Left Outputs */ + SND_SOC_DAPM_DAC("Left DAC", "Left Playback", DAC_PWR, 7, 0), + SND_SOC_DAPM_MUX("Left DAC Mux", SND_SOC_NOPM, 0, 0, + &aic3x_left_dac_mux_controls), + SND_SOC_DAPM_MIXER("Left DAC_L1 Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_left_dac_mixer_controls[0], + ARRAY_SIZE(aic3x_left_dac_mixer_controls)), + SND_SOC_DAPM_MUX("Left HPCOM Mux", SND_SOC_NOPM, 0, 0, + &aic3x_left_hpcom_mux_controls), + SND_SOC_DAPM_PGA("Left Line Out", LLOPM_CTRL, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Left HP Out", HPLOUT_CTRL, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Left HP Com", HPLCOM_CTRL, 0, 0, NULL, 0), + + /* Right DAC to Right Outputs */ + SND_SOC_DAPM_DAC("Right DAC", "Right Playback", DAC_PWR, 6, 0), + SND_SOC_DAPM_MUX("Right DAC Mux", SND_SOC_NOPM, 0, 0, + &aic3x_right_dac_mux_controls), + SND_SOC_DAPM_MIXER("Right DAC_R1 Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_right_dac_mixer_controls[0], + ARRAY_SIZE(aic3x_right_dac_mixer_controls)), + SND_SOC_DAPM_MUX("Right HPCOM Mux", SND_SOC_NOPM, 0, 0, + &aic3x_right_hpcom_mux_controls), + SND_SOC_DAPM_PGA("Right Line Out", RLOPM_CTRL, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Right HP Out", HPROUT_CTRL, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Right HP Com", HPRCOM_CTRL, 0, 0, NULL, 0), + + /* Mono Output */ + SND_SOC_DAPM_PGA("Mono Out", MONOLOPM_CTRL, 0, 0, NULL, 0), + + /* Left Inputs to Left ADC */ + SND_SOC_DAPM_ADC("Left ADC", "Left Capture", LINE1L_2_LADC_CTRL, 2, 0), + SND_SOC_DAPM_MIXER("Left PGA Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_left_pga_mixer_controls[0], + ARRAY_SIZE(aic3x_left_pga_mixer_controls)), + SND_SOC_DAPM_MUX("Left Line1L Mux", SND_SOC_NOPM, 0, 0, + &aic3x_left_line1_mux_controls), + SND_SOC_DAPM_MUX("Left Line2L Mux", SND_SOC_NOPM, 0, 0, + &aic3x_left_line2_mux_controls), + + /* Right Inputs to Right ADC */ + SND_SOC_DAPM_ADC("Right ADC", "Right Capture", + LINE1R_2_RADC_CTRL, 2, 0), + SND_SOC_DAPM_MIXER("Right PGA Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_right_pga_mixer_controls[0], + ARRAY_SIZE(aic3x_right_pga_mixer_controls)), + SND_SOC_DAPM_MUX("Right Line1R Mux", SND_SOC_NOPM, 0, 0, + &aic3x_right_line1_mux_controls), + SND_SOC_DAPM_MUX("Right Line2R Mux", SND_SOC_NOPM, 0, 0, + &aic3x_right_line2_mux_controls), + + /* Mic Bias */ + SND_SOC_DAPM_MICBIAS("Mic Bias 2V", MICBIAS_CTRL, 6, 0), + SND_SOC_DAPM_MICBIAS("Mic Bias 2.5V", MICBIAS_CTRL, 7, 0), + SND_SOC_DAPM_MICBIAS("Mic Bias AVDD", MICBIAS_CTRL, 6, 0), + SND_SOC_DAPM_MICBIAS("Mic Bias AVDD", MICBIAS_CTRL, 7, 0), + + /* Left PGA to Left Output bypass */ + SND_SOC_DAPM_MIXER("Left PGA Bypass Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_left_pga_bp_mixer_controls[0], + ARRAY_SIZE(aic3x_left_pga_bp_mixer_controls)), + + /* Right PGA to Right Output bypass */ + SND_SOC_DAPM_MIXER("Right PGA Bypass Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_right_pga_bp_mixer_controls[0], + ARRAY_SIZE(aic3x_right_pga_bp_mixer_controls)), + + /* Left Line2 to Left Output bypass */ + SND_SOC_DAPM_MIXER("Left Line2 Bypass Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_left_line2_bp_mixer_controls[0], + ARRAY_SIZE(aic3x_left_line2_bp_mixer_controls)), + + /* Right Line2 to Right Output bypass */ + SND_SOC_DAPM_MIXER("Right Line2 Bypass Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_right_line2_bp_mixer_controls[0], + ARRAY_SIZE(aic3x_right_line2_bp_mixer_controls)), + + SND_SOC_DAPM_OUTPUT("LLOUT"), + SND_SOC_DAPM_OUTPUT("RLOUT"), + SND_SOC_DAPM_OUTPUT("MONO_LOUT"), + SND_SOC_DAPM_OUTPUT("HPLOUT"), + SND_SOC_DAPM_OUTPUT("HPROUT"), + SND_SOC_DAPM_OUTPUT("HPLCOM"), + SND_SOC_DAPM_OUTPUT("HPRCOM"), + + SND_SOC_DAPM_INPUT("MIC3L"), + SND_SOC_DAPM_INPUT("MIC3R"), + SND_SOC_DAPM_INPUT("LINE1L"), + SND_SOC_DAPM_INPUT("LINE1R"), + SND_SOC_DAPM_INPUT("LINE2L"), + SND_SOC_DAPM_INPUT("LINE2R"), +}; + +static const char *intercon[][3] = { + /* Left Output */ + {"Left DAC Mux", "DAC_L1", "Left DAC"}, + {"Left DAC Mux", "DAC_L2", "Left DAC"}, + {"Left DAC Mux", "DAC_L3", "Left DAC"}, + + {"Left DAC_L1 Mixer", "Line Switch", "Left DAC Mux"}, + {"Left DAC_L1 Mixer", "Mono Switch", "Left DAC Mux"}, + {"Left DAC_L1 Mixer", "HP Switch", "Left DAC Mux"}, + {"Left DAC_L1 Mixer", "HPCOM Switch", "Left DAC Mux"}, + {"Left Line Out", NULL, "Left DAC Mux"}, + {"Left HP Out", NULL, "Left DAC Mux"}, + + {"Left HPCOM Mux", "differential of HPLOUT", "Left DAC_L1 Mixer"}, + {"Left HPCOM Mux", "constant VCM", "Left DAC_L1 Mixer"}, + {"Left HPCOM Mux", "single-ended", "Left DAC_L1 Mixer"}, + + {"Left Line Out", NULL, "Left DAC_L1 Mixer"}, + {"Mono Out", NULL, "Left DAC_L1 Mixer"}, + {"Left HP Out", NULL, "Left DAC_L1 Mixer"}, + {"Left HP Com", NULL, "Left HPCOM Mux"}, + + {"LLOUT", NULL, "Left Line Out"}, + {"LLOUT", NULL, "Left Line Out"}, + {"HPLOUT", NULL, "Left HP Out"}, + {"HPLCOM", NULL, "Left HP Com"}, + + /* Right Output */ + {"Right DAC Mux", "DAC_R1", "Right DAC"}, + {"Right DAC Mux", "DAC_R2", "Right DAC"}, + {"Right DAC Mux", "DAC_R3", "Right DAC"}, + + {"Right DAC_R1 Mixer", "Line Switch", "Right DAC Mux"}, + {"Right DAC_R1 Mixer", "Mono Switch", "Right DAC Mux"}, + {"Right DAC_R1 Mixer", "HP Switch", "Right DAC Mux"}, + {"Right DAC_R1 Mixer", "HPCOM Switch", "Right DAC Mux"}, + {"Right Line Out", NULL, "Right DAC Mux"}, + {"Right HP Out", NULL, "Right DAC Mux"}, + + {"Right HPCOM Mux", "differential of HPROUT", "Right DAC_R1 Mixer"}, + {"Right HPCOM Mux", "constant VCM", "Right DAC_R1 Mixer"}, + {"Right HPCOM Mux", "single-ended", "Right DAC_R1 Mixer"}, + {"Right HPCOM Mux", "differential of HPLCOM", "Right DAC_R1 Mixer"}, + {"Right HPCOM Mux", "external feedback", "Right DAC_R1 Mixer"}, + + {"Right Line Out", NULL, "Right DAC_R1 Mixer"}, + {"Mono Out", NULL, "Right DAC_R1 Mixer"}, + {"Right HP Out", NULL, "Right DAC_R1 Mixer"}, + {"Right HP Com", NULL, "Right HPCOM Mux"}, + + {"RLOUT", NULL, "Right Line Out"}, + {"RLOUT", NULL, "Right Line Out"}, + {"HPROUT", NULL, "Right HP Out"}, + {"HPRCOM", NULL, "Right HP Com"}, + + /* Mono Output */ + {"MONOLOUT", NULL, "Mono Out"}, + {"MONOLOUT", NULL, "Mono Out"}, + + /* Left Input */ + {"Left Line1L Mux", "single-ended", "LINE1L"}, + {"Left Line1L Mux", "differential", "LINE1L"}, + + {"Left Line2L Mux", "single-ended", "LINE2L"}, + {"Left Line2L Mux", "differential", "LINE2L"}, + + {"Left PGA Mixer", "Line1L Switch", "Left Line1L Mux"}, + {"Left PGA Mixer", "Line2L Switch", "Left Line2L Mux"}, + {"Left PGA Mixer", "Mic3L Switch", "MIC3L"}, + + {"Left ADC", NULL, "Left PGA Mixer"}, + + /* Right Input */ + {"Right Line1R Mux", "single-ended", "LINE1R"}, + {"Right Line1R Mux", "differential", "LINE1R"}, + + {"Right Line2R Mux", "single-ended", "LINE2R"}, + {"Right Line2R Mux", "differential", "LINE2R"}, + + {"Right PGA Mixer", "Line1R Switch", "Right Line1R Mux"}, + {"Right PGA Mixer", "Line2R Switch", "Right Line2R Mux"}, + {"Right PGA Mixer", "Mic3R Switch", "MIC3R"}, + + {"Right ADC", NULL, "Right PGA Mixer"}, + + /* Left PGA Bypass */ + {"Left PGA Bypass Mixer", "Line Switch", "Left PGA Mixer"}, + {"Left PGA Bypass Mixer", "Mono Switch", "Left PGA Mixer"}, + {"Left PGA Bypass Mixer", "HP Switch", "Left PGA Mixer"}, + {"Left PGA Bypass Mixer", "HPCOM Switch", "Left PGA Mixer"}, + + {"Left HPCOM Mux", "differential of HPLOUT", "Left PGA Bypass Mixer"}, + {"Left HPCOM Mux", "constant VCM", "Left PGA Bypass Mixer"}, + {"Left HPCOM Mux", "single-ended", "Left PGA Bypass Mixer"}, + + {"Left Line Out", NULL, "Left PGA Bypass Mixer"}, + {"Mono Out", NULL, "Left PGA Bypass Mixer"}, + {"Left HP Out", NULL, "Left PGA Bypass Mixer"}, + + /* Right PGA Bypass */ + {"Right PGA Bypass Mixer", "Line Switch", "Right PGA Mixer"}, + {"Right PGA Bypass Mixer", "Mono Switch", "Right PGA Mixer"}, + {"Right PGA Bypass Mixer", "HP Switch", "Right PGA Mixer"}, + {"Right PGA Bypass Mixer", "HPCOM Switch", "Right PGA Mixer"}, + + {"Right HPCOM Mux", "differential of HPROUT", "Right PGA Bypass Mixer"}, + {"Right HPCOM Mux", "constant VCM", "Right PGA Bypass Mixer"}, + {"Right HPCOM Mux", "single-ended", "Right PGA Bypass Mixer"}, + {"Right HPCOM Mux", "differential of HPLCOM", "Right PGA Bypass Mixer"}, + {"Right HPCOM Mux", "external feedback", "Right PGA Bypass Mixer"}, + + {"Right Line Out", NULL, "Right PGA Bypass Mixer"}, + {"Mono Out", NULL, "Right PGA Bypass Mixer"}, + {"Right HP Out", NULL, "Right PGA Bypass Mixer"}, + + /* Left Line2 Bypass */ + {"Left Line2 Bypass Mixer", "Line Switch", "Left Line2L Mux"}, + {"Left Line2 Bypass Mixer", "Mono Switch", "Left Line2L Mux"}, + {"Left Line2 Bypass Mixer", "HP Switch", "Left Line2L Mux"}, + {"Left Line2 Bypass Mixer", "HPCOM Switch", "Left Line2L Mux"}, + + {"Left HPCOM Mux", "differential of HPLOUT", "Left Line2 Bypass Mixer"}, + {"Left HPCOM Mux", "constant VCM", "Left Line2 Bypass Mixer"}, + {"Left HPCOM Mux", "single-ended", "Left Line2 Bypass Mixer"}, + + {"Left Line Out", NULL, "Left Line2 Bypass Mixer"}, + {"Mono Out", NULL, "Left Line2 Bypass Mixer"}, + {"Left HP Out", NULL, "Left Line2 Bypass Mixer"}, + + /* Right Line2 Bypass */ + {"Right Line2 Bypass Mixer", "Line Switch", "Right Line2R Mux"}, + {"Right Line2 Bypass Mixer", "Mono Switch", "Right Line2R Mux"}, + {"Right Line2 Bypass Mixer", "HP Switch", "Right Line2R Mux"}, + {"Right Line2 Bypass Mixer", "HPCOM Switch", "Right Line2R Mux"}, + + {"Right HPCOM Mux", "differential of HPROUT", "Right Line2 Bypass Mixer"}, + {"Right HPCOM Mux", "constant VCM", "Right Line2 Bypass Mixer"}, + {"Right HPCOM Mux", "single-ended", "Right Line2 Bypass Mixer"}, + {"Right HPCOM Mux", "differential of HPLCOM", "Right Line2 Bypass Mixer"}, + {"Right HPCOM Mux", "external feedback", "Right Line2 Bypass Mixer"}, + + {"Right Line Out", NULL, "Right Line2 Bypass Mixer"}, + {"Mono Out", NULL, "Right Line2 Bypass Mixer"}, + {"Right HP Out", NULL, "Right Line2 Bypass Mixer"}, + + /* terminator */ + {NULL, NULL, NULL}, +}; + +static int aic3x_add_widgets(struct snd_soc_codec *codec) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(aic3x_dapm_widgets); i++) + snd_soc_dapm_new_control(codec, &aic3x_dapm_widgets[i]); + + /* set up audio path interconnects */ + for (i = 0; intercon[i][0] != NULL; i++) + snd_soc_dapm_connect_input(codec, intercon[i][0], + intercon[i][1], intercon[i][2]); + + snd_soc_dapm_new_widgets(codec); + return 0; +} + +struct aic3x_rate_divs { + u32 mclk; + u32 rate; + u32 fsref_reg; + u8 sr_reg:4; + u8 pllj_reg; + u16 plld_reg; +}; + +/* AIC3X codec mclk clock divider coefficients */ +static const struct aic3x_rate_divs aic3x_divs[] = { + /* 8k */ + {22579200, 8000, 48000, 0xa, 8, 7075}, + {33868800, 8000, 48000, 0xa, 5, 8049}, + /* 11.025k */ + {22579200, 11025, 44100, 0x6, 8, 0}, + {33868800, 11025, 44100, 0x6, 5, 3333}, + /* 16k */ + {22579200, 16000, 48000, 0x4, 8, 7075}, + {33868800, 16000, 48000, 0x4, 5, 8049}, + /* 22.05k */ + {22579200, 22050, 44100, 0x2, 8, 0}, + {33868800, 22050, 44100, 0x2, 5, 3333}, + /* 32k */ + {22579200, 32000, 48000, 0x1, 8, 7075}, + {33868800, 32000, 48000, 0x1, 5, 8049}, + /* 44.1k */ + {22579200, 44100, 44100, 0x0, 8, 0}, + {33868800, 44100, 44100, 0x0, 5, 3333}, + /* 48k */ + {22579200, 48000, 48000, 0x0, 8, 7075}, + {33868800, 48000, 48000, 0x0, 5, 8049}, + /* 64k */ + {22579200, 96000, 96000, 0x1, 8, 7075}, + {33868800, 96000, 96000, 0x1, 5, 8049}, + /* 88.2k */ + {22579200, 88200, 88200, 0x0, 8, 0}, + {33868800, 88200, 88200, 0x0, 5, 3333}, + /* 96k */ + {22579200, 96000, 96000, 0x0, 8, 7075}, + {33868800, 96000, 96000, 0x0, 5, 8049}, +}; + +static inline int aic3x_get_divs(int mclk, int rate) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(aic3x_divs); i++) { + if (aic3x_divs[i].rate == rate && aic3x_divs[i].mclk == mclk) + return i; + } + + return 0; +} + +static int aic3x_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + struct aic3x_priv *aic3x = codec->private_data; + int i; + u8 data, pll_p, pll_r, pll_j; + u16 pll_d; + + i = aic3x_get_divs(aic3x->sysclk, params_rate(params)); + + /* Route Left DAC to left channel input and + * right DAC to right channel input */ + data = (LDAC2LCH | RDAC2RCH); + switch (aic3x_divs[i].fsref_reg) { + case 44100: + data |= FSREF_44100; + break; + case 48000: + data |= FSREF_48000; + break; + case 88200: + data |= FSREF_44100 | DUAL_RATE_MODE; + break; + case 96000: + data |= FSREF_48000 | DUAL_RATE_MODE; + break; + } + aic3x_write(codec, AIC3X_CODEC_DATAPATH_REG, data); + + /* codec sample rate select */ + data = aic3x_divs[i].sr_reg; + data |= (data << 4); + aic3x_write(codec, AIC3X_SAMPLE_RATE_SEL_REG, data); + + /* Use PLL for generation Fsref by equation: + * Fsref = (MCLK * K * R)/(2048 * P); + * Fix P = 2 and R = 1 and calculate K, if + * K = J.D, i.e. J - an interger portion of K and D is the fractional + * one with 4 digits of precision; + * Example: + * For MCLK = 22.5792 MHz and Fsref = 48kHz: + * Select P = 2, R= 1, K = 8.7074, which results in J = 8, D = 7074 + */ + pll_p = 2; + pll_r = 1; + pll_j = aic3x_divs[i].pllj_reg; + pll_d = aic3x_divs[i].plld_reg; + + data = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG); + aic3x_write(codec, AIC3X_PLL_PROGA_REG, data | (pll_p << PLLP_SHIFT)); + aic3x_write(codec, AIC3X_OVRF_STATUS_AND_PLLR_REG, pll_r << PLLR_SHIFT); + aic3x_write(codec, AIC3X_PLL_PROGB_REG, pll_j << PLLJ_SHIFT); + aic3x_write(codec, AIC3X_PLL_PROGC_REG, (pll_d >> 6) << PLLD_MSB_SHIFT); + aic3x_write(codec, AIC3X_PLL_PROGD_REG, + (pll_d & 0x3F) << PLLD_LSB_SHIFT); + + /* select data word length */ + data = + aic3x_read_reg_cache(codec, AIC3X_ASD_INTF_CTRLB) & (~(0x3 << 4)); + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + data |= (0x01 << 4); + break; + case SNDRV_PCM_FORMAT_S24_LE: + data |= (0x02 << 4); + break; + case SNDRV_PCM_FORMAT_S32_LE: + data |= (0x03 << 4); + break; + } + aic3x_write(codec, AIC3X_ASD_INTF_CTRLB, data); + + return 0; +} + +static int aic3x_mute(struct snd_soc_codec_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + u8 ldac_reg = aic3x_read_reg_cache(codec, LDAC_VOL) & ~MUTE_ON; + u8 rdac_reg = aic3x_read_reg_cache(codec, RDAC_VOL) & ~MUTE_ON; + + if (mute) { + aic3x_write(codec, LDAC_VOL, ldac_reg | MUTE_ON); + aic3x_write(codec, RDAC_VOL, rdac_reg | MUTE_ON); + } else { + aic3x_write(codec, LDAC_VOL, ldac_reg); + aic3x_write(codec, RDAC_VOL, rdac_reg); + } + + return 0; +} + +static int aic3x_set_dai_sysclk(struct snd_soc_codec_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct aic3x_priv *aic3x = codec->private_data; + + switch (freq) { + case 22579200: + case 33868800: + aic3x->sysclk = freq; + return 0; + } + + return -EINVAL; +} + +static int aic3x_set_dai_fmt(struct snd_soc_codec_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct aic3x_priv *aic3x = codec->private_data; + u8 iface_areg = 0; + u8 iface_breg = 0; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + aic3x->master = 1; + iface_areg |= BIT_CLK_MASTER | WORD_CLK_MASTER; + break; + case SND_SOC_DAIFMT_CBS_CFS: + aic3x->master = 0; + break; + default: + return -EINVAL; + } + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + break; + case SND_SOC_DAIFMT_DSP_A: + iface_breg |= (0x01 << 6); + break; + case SND_SOC_DAIFMT_RIGHT_J: + iface_breg |= (0x02 << 6); + break; + case SND_SOC_DAIFMT_LEFT_J: + iface_breg |= (0x03 << 6); + break; + default: + return -EINVAL; + } + + /* set iface */ + aic3x_write(codec, AIC3X_ASD_INTF_CTRLA, iface_areg); + aic3x_write(codec, AIC3X_ASD_INTF_CTRLB, iface_breg); + + return 0; +} + +static int aic3x_dapm_event(struct snd_soc_codec *codec, int event) +{ + struct aic3x_priv *aic3x = codec->private_data; + u8 reg; + + switch (event) { + case SNDRV_CTL_POWER_D0: + /* all power is driven by DAPM system */ + if (aic3x->master) { + /* enable pll */ + reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG); + aic3x_write(codec, AIC3X_PLL_PROGA_REG, + reg | PLL_ENABLE); + } + break; + case SNDRV_CTL_POWER_D1: + case SNDRV_CTL_POWER_D2: + break; + case SNDRV_CTL_POWER_D3hot: + /* + * all power is driven by DAPM system, + * so output power is safe if bypass was set + */ + if (aic3x->master) { + /* disable pll */ + reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG); + aic3x_write(codec, AIC3X_PLL_PROGA_REG, + reg & ~PLL_ENABLE); + } + break; + case SNDRV_CTL_POWER_D3cold: + /* force all power off */ + reg = aic3x_read_reg_cache(codec, LINE1L_2_LADC_CTRL); + aic3x_write(codec, LINE1L_2_LADC_CTRL, reg & ~LADC_PWR_ON); + reg = aic3x_read_reg_cache(codec, LINE1R_2_RADC_CTRL); + aic3x_write(codec, LINE1R_2_RADC_CTRL, reg & ~RADC_PWR_ON); + + reg = aic3x_read_reg_cache(codec, DAC_PWR); + aic3x_write(codec, DAC_PWR, reg & ~(LDAC_PWR_ON | RDAC_PWR_ON)); + + reg = aic3x_read_reg_cache(codec, HPLOUT_CTRL); + aic3x_write(codec, HPLOUT_CTRL, reg & ~HPLOUT_PWR_ON); + reg = aic3x_read_reg_cache(codec, HPROUT_CTRL); + aic3x_write(codec, HPROUT_CTRL, reg & ~HPROUT_PWR_ON); + + reg = aic3x_read_reg_cache(codec, HPLCOM_CTRL); + aic3x_write(codec, HPLCOM_CTRL, reg & ~HPLCOM_PWR_ON); + reg = aic3x_read_reg_cache(codec, HPRCOM_CTRL); + aic3x_write(codec, HPRCOM_CTRL, reg & ~HPRCOM_PWR_ON); + + reg = aic3x_read_reg_cache(codec, MONOLOPM_CTRL); + aic3x_write(codec, MONOLOPM_CTRL, reg & ~MONOLOPM_PWR_ON); + + reg = aic3x_read_reg_cache(codec, LLOPM_CTRL); + aic3x_write(codec, LLOPM_CTRL, reg & ~LLOPM_PWR_ON); + reg = aic3x_read_reg_cache(codec, RLOPM_CTRL); + aic3x_write(codec, RLOPM_CTRL, reg & ~RLOPM_PWR_ON); + + if (aic3x->master) { + /* disable pll */ + reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG); + aic3x_write(codec, AIC3X_PLL_PROGA_REG, + reg & ~PLL_ENABLE); + } + break; + } + codec->dapm_state = event; + + return 0; +} + +#define AIC3X_RATES SNDRV_PCM_RATE_8000_96000 +#define AIC3X_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE) + +struct snd_soc_codec_dai aic3x_dai = { + .name = "aic3x", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = AIC3X_RATES, + .formats = AIC3X_FORMATS,}, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = AIC3X_RATES, + .formats = AIC3X_FORMATS,}, + .ops = { + .hw_params = aic3x_hw_params, + }, + .dai_ops = { + .digital_mute = aic3x_mute, + .set_sysclk = aic3x_set_dai_sysclk, + .set_fmt = aic3x_set_dai_fmt, + } +}; +EXPORT_SYMBOL_GPL(aic3x_dai); + +static int aic3x_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + aic3x_dapm_event(codec, SNDRV_CTL_POWER_D3cold); + + return 0; +} + +static int aic3x_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + int i; + u8 data[2]; + u8 *cache = codec->reg_cache; + + /* Sync reg_cache with the hardware */ + for (i = 0; i < ARRAY_SIZE(aic3x_reg); i++) { + data[0] = i; + data[1] = cache[i]; + codec->hw_write(codec->control_data, data, 2); + } + + aic3x_dapm_event(codec, codec->suspend_dapm_state); + + return 0; +} + +/* + * initialise the AIC3X driver + * register the mixer and dsp interfaces with the kernel + */ +static int aic3x_init(struct snd_soc_device *socdev) +{ + struct snd_soc_codec *codec = socdev->codec; + int reg, ret = 0; + + codec->name = "aic3x"; + codec->owner = THIS_MODULE; + codec->read = aic3x_read_reg_cache; + codec->write = aic3x_write; + codec->dapm_event = aic3x_dapm_event; + codec->dai = &aic3x_dai; + codec->num_dai = 1; + codec->reg_cache_size = sizeof(aic3x_reg); + codec->reg_cache = kmemdup(aic3x_reg, sizeof(aic3x_reg), GFP_KERNEL); + if (codec->reg_cache == NULL) + return -ENOMEM; + + aic3x_write(codec, AIC3X_PAGE_SELECT, PAGE0_SELECT); + aic3x_write(codec, AIC3X_RESET, SOFT_RESET); + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + printk(KERN_ERR "aic3x: failed to create pcms\n"); + goto pcm_err; + } + + /* DAC default volume and mute */ + aic3x_write(codec, LDAC_VOL, DEFAULT_VOL | MUTE_ON); + aic3x_write(codec, RDAC_VOL, DEFAULT_VOL | MUTE_ON); + + /* DAC to HP default volume and route to Output mixer */ + aic3x_write(codec, DACL1_2_HPLOUT_VOL, DEFAULT_VOL | ROUTE_ON); + aic3x_write(codec, DACR1_2_HPROUT_VOL, DEFAULT_VOL | ROUTE_ON); + aic3x_write(codec, DACL1_2_HPLCOM_VOL, DEFAULT_VOL | ROUTE_ON); + aic3x_write(codec, DACR1_2_HPRCOM_VOL, DEFAULT_VOL | ROUTE_ON); + /* DAC to Line Out default volume and route to Output mixer */ + aic3x_write(codec, DACL1_2_LLOPM_VOL, DEFAULT_VOL | ROUTE_ON); + aic3x_write(codec, DACR1_2_RLOPM_VOL, DEFAULT_VOL | ROUTE_ON); + /* DAC to Mono Line Out default volume and route to Output mixer */ + aic3x_write(codec, DACL1_2_MONOLOPM_VOL, DEFAULT_VOL | ROUTE_ON); + aic3x_write(codec, DACR1_2_MONOLOPM_VOL, DEFAULT_VOL | ROUTE_ON); + + /* unmute all outputs */ + reg = aic3x_read_reg_cache(codec, LLOPM_CTRL); + aic3x_write(codec, LLOPM_CTRL, reg | UNMUTE); + reg = aic3x_read_reg_cache(codec, RLOPM_CTRL); + aic3x_write(codec, RLOPM_CTRL, reg | UNMUTE); + reg = aic3x_read_reg_cache(codec, MONOLOPM_CTRL); + aic3x_write(codec, MONOLOPM_CTRL, reg | UNMUTE); + reg = aic3x_read_reg_cache(codec, HPLOUT_CTRL); + aic3x_write(codec, HPLOUT_CTRL, reg | UNMUTE); + reg = aic3x_read_reg_cache(codec, HPROUT_CTRL); + aic3x_write(codec, HPROUT_CTRL, reg | UNMUTE); + reg = aic3x_read_reg_cache(codec, HPLCOM_CTRL); + aic3x_write(codec, HPLCOM_CTRL, reg | UNMUTE); + reg = aic3x_read_reg_cache(codec, HPRCOM_CTRL); + aic3x_write(codec, HPRCOM_CTRL, reg | UNMUTE); + + /* ADC default volume and unmute */ + aic3x_write(codec, LADC_VOL, DEFAULT_GAIN); + aic3x_write(codec, RADC_VOL, DEFAULT_GAIN); + /* By default route Line1 to ADC PGA mixer */ + aic3x_write(codec, LINE1L_2_LADC_CTRL, 0x0); + aic3x_write(codec, LINE1R_2_RADC_CTRL, 0x0); + + /* PGA to HP Bypass default volume, disconnect from Output Mixer */ + aic3x_write(codec, PGAL_2_HPLOUT_VOL, DEFAULT_VOL); + aic3x_write(codec, PGAR_2_HPROUT_VOL, DEFAULT_VOL); + aic3x_write(codec, PGAL_2_HPLCOM_VOL, DEFAULT_VOL); + aic3x_write(codec, PGAR_2_HPRCOM_VOL, DEFAULT_VOL); + /* PGA to Line Out default volume, disconnect from Output Mixer */ + aic3x_write(codec, PGAL_2_LLOPM_VOL, DEFAULT_VOL); + aic3x_write(codec, PGAR_2_RLOPM_VOL, DEFAULT_VOL); + /* PGA to Mono Line Out default volume, disconnect from Output Mixer */ + aic3x_write(codec, PGAL_2_MONOLOPM_VOL, DEFAULT_VOL); + aic3x_write(codec, PGAR_2_MONOLOPM_VOL, DEFAULT_VOL); + + /* Line2 to HP Bypass default volume, disconnect from Output Mixer */ + aic3x_write(codec, LINE2L_2_HPLOUT_VOL, DEFAULT_VOL); + aic3x_write(codec, LINE2R_2_HPROUT_VOL, DEFAULT_VOL); + aic3x_write(codec, LINE2L_2_HPLCOM_VOL, DEFAULT_VOL); + aic3x_write(codec, LINE2R_2_HPRCOM_VOL, DEFAULT_VOL); + /* Line2 Line Out default volume, disconnect from Output Mixer */ + aic3x_write(codec, LINE2L_2_LLOPM_VOL, DEFAULT_VOL); + aic3x_write(codec, LINE2R_2_RLOPM_VOL, DEFAULT_VOL); + /* Line2 to Mono Out default volume, disconnect from Output Mixer */ + aic3x_write(codec, LINE2L_2_MONOLOPM_VOL, DEFAULT_VOL); + aic3x_write(codec, LINE2R_2_MONOLOPM_VOL, DEFAULT_VOL); + + /* off, with power on */ + aic3x_dapm_event(codec, SNDRV_CTL_POWER_D3hot); + + aic3x_add_controls(codec); + aic3x_add_widgets(codec); + ret = snd_soc_register_card(socdev); + if (ret < 0) { + printk(KERN_ERR "aic3x: failed to register card\n"); + goto card_err; + } + + return ret; + +card_err: + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +pcm_err: + kfree(codec->reg_cache); + return ret; +} + +static struct snd_soc_device *aic3x_socdev; + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +/* + * AIC3X 2 wire address can be up to 4 devices with device addresses + * 0x18, 0x19, 0x1A, 0x1B + */ +static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END }; + +/* Magic definition of all other variables and things */ +I2C_CLIENT_INSMOD; + +static struct i2c_driver aic3x_i2c_driver; +static struct i2c_client client_template; + +/* + * If the i2c layer weren't so broken, we could pass this kind of data + * around + */ +static int aic3x_codec_probe(struct i2c_adapter *adap, int addr, int kind) +{ + struct snd_soc_device *socdev = aic3x_socdev; + struct aic3x_setup_data *setup = socdev->codec_data; + struct snd_soc_codec *codec = socdev->codec; + struct i2c_client *i2c; + int ret; + + if (addr != setup->i2c_address) + return -ENODEV; + + client_template.adapter = adap; + client_template.addr = addr; + + i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); + if (i2c == NULL) { + kfree(codec); + return -ENOMEM; + } + i2c_set_clientdata(i2c, codec); + codec->control_data = i2c; + + ret = i2c_attach_client(i2c); + if (ret < 0) { + printk(KERN_ERR "aic3x: failed to attach codec at addr %x\n", + addr); + goto err; + } + + ret = aic3x_init(socdev); + if (ret < 0) { + printk(KERN_ERR "aic3x: failed to initialise AIC3X\n"); + goto err; + } + return ret; + +err: + kfree(codec); + kfree(i2c); + return ret; +} + +static int aic3x_i2c_detach(struct i2c_client *client) +{ + struct snd_soc_codec *codec = i2c_get_clientdata(client); + i2c_detach_client(client); + kfree(codec->reg_cache); + kfree(client); + return 0; +} + +static int aic3x_i2c_attach(struct i2c_adapter *adap) +{ + return i2c_probe(adap, &addr_data, aic3x_codec_probe); +} + +/* machine i2c codec control layer */ +static struct i2c_driver aic3x_i2c_driver = { + .driver = { + .name = "aic3x I2C Codec", + .owner = THIS_MODULE, + }, + .id = I2C_DRIVERID_I2CDEV, + .attach_adapter = aic3x_i2c_attach, + .detach_client = aic3x_i2c_detach, + .command = NULL, +}; + +static struct i2c_client client_template = { + .name = "AIC3X", + .driver = &aic3x_i2c_driver, +}; +#endif + +static int aic3x_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct aic3x_setup_data *setup; + struct snd_soc_codec *codec; + struct aic3x_priv *aic3x; + int ret = 0; + + printk(KERN_INFO "AIC3X Audio Codec %s\n", AIC3X_VERSION); + + setup = socdev->codec_data; + codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); + if (codec == NULL) + return -ENOMEM; + + aic3x = kzalloc(sizeof(struct aic3x_priv), GFP_KERNEL); + if (aic3x == NULL) { + kfree(codec); + return -ENOMEM; + } + + codec->private_data = aic3x; + socdev->codec = codec; + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + aic3x_socdev = socdev; +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + if (setup->i2c_address) { + normal_i2c[0] = setup->i2c_address; + codec->hw_write = (hw_write_t) i2c_master_send; + ret = i2c_add_driver(&aic3x_i2c_driver); + if (ret != 0) + printk(KERN_ERR "can't add i2c driver"); + } +#else + /* Add other interfaces here */ +#endif + return ret; +} + +static int aic3x_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + /* power down chip */ + if (codec->control_data) + aic3x_dapm_event(codec, SNDRV_CTL_POWER_D3); + + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_del_driver(&aic3x_i2c_driver); +#endif + kfree(codec->private_data); + kfree(codec); + + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_aic3x = { + .probe = aic3x_probe, + .remove = aic3x_remove, + .suspend = aic3x_suspend, + .resume = aic3x_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_aic3x); + +MODULE_DESCRIPTION("ASoC TLV320AIC3X codec driver"); +MODULE_AUTHOR("Vladimir Barinov"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tlv320aic3x.h b/sound/soc/codecs/tlv320aic3x.h new file mode 100644 index 0000000..d0cdeeb --- /dev/null +++ b/sound/soc/codecs/tlv320aic3x.h @@ -0,0 +1,181 @@ +/* + * ALSA SoC TLV320AIC3X codec driver + * + * Author: Vladimir Barinov, <vbarinov@ru.mvista.com> + * Copyright: (C) 2007 MontaVista Software, Inc., <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _AIC3X_H +#define _AIC3X_H + +/* AIC3X register space */ +#define AIC3X_CACHEREGNUM 103 + +/* Page select register */ +#define AIC3X_PAGE_SELECT 0 +/* Software reset register */ +#define AIC3X_RESET 1 +/* Codec Sample rate select register */ +#define AIC3X_SAMPLE_RATE_SEL_REG 2 +/* PLL progrramming register A */ +#define AIC3X_PLL_PROGA_REG 3 +/* PLL progrramming register B */ +#define AIC3X_PLL_PROGB_REG 4 +/* PLL progrramming register C */ +#define AIC3X_PLL_PROGC_REG 5 +/* PLL progrramming register D */ +#define AIC3X_PLL_PROGD_REG 6 +/* Codec datapath setup register */ +#define AIC3X_CODEC_DATAPATH_REG 7 +/* Audio serial data interface control register A */ +#define AIC3X_ASD_INTF_CTRLA 8 +/* Audio serial data interface control register B */ +#define AIC3X_ASD_INTF_CTRLB 9 +/* Audio overflow status and PLL R value programming register */ +#define AIC3X_OVRF_STATUS_AND_PLLR_REG 11 + +/* ADC PGA Gain control registers */ +#define LADC_VOL 15 +#define RADC_VOL 16 +/* MIC3 control registers */ +#define MIC3LR_2_LADC_CTRL 17 +#define MIC3LR_2_RADC_CTRL 18 +/* Line1 Input control registers */ +#define LINE1L_2_LADC_CTRL 19 +#define LINE1R_2_RADC_CTRL 22 +/* Line2 Input control registers */ +#define LINE2L_2_LADC_CTRL 20 +#define LINE2R_2_RADC_CTRL 23 +/* MICBIAS Control Register */ +#define MICBIAS_CTRL 25 + +/* AGC Control Registers A, B, C */ +#define LAGC_CTRL_A 26 +#define LAGC_CTRL_B 27 +#define LAGC_CTRL_C 28 +#define RAGC_CTRL_A 29 +#define RAGC_CTRL_B 30 +#define RAGC_CTRL_C 31 + +/* DAC Power and Left High Power Output control registers */ +#define DAC_PWR 37 +#define HPLCOM_CFG 37 +/* Right High Power Output control registers */ +#define HPRCOM_CFG 38 +/* DAC Output Switching control registers */ +#define DAC_LINE_MUX 41 +/* High Power Output Driver Pop Reduction registers */ +#define HPOUT_POP_REDUCTION 42 +/* DAC Digital control registers */ +#define LDAC_VOL 43 +#define RDAC_VOL 44 +/* High Power Output control registers */ +#define LINE2L_2_HPLOUT_VOL 45 +#define LINE2R_2_HPROUT_VOL 62 +#define PGAL_2_HPLOUT_VOL 46 +#define PGAR_2_HPROUT_VOL 63 +#define DACL1_2_HPLOUT_VOL 47 +#define DACR1_2_HPROUT_VOL 64 +#define HPLOUT_CTRL 51 +#define HPROUT_CTRL 65 +/* High Power COM control registers */ +#define LINE2L_2_HPLCOM_VOL 52 +#define LINE2R_2_HPRCOM_VOL 69 +#define PGAL_2_HPLCOM_VOL 53 +#define PGAR_2_HPRCOM_VOL 70 +#define DACL1_2_HPLCOM_VOL 54 +#define DACR1_2_HPRCOM_VOL 71 +#define HPLCOM_CTRL 58 +#define HPRCOM_CTRL 72 +/* Mono Line Output Plus/Minus control registers */ +#define LINE2L_2_MONOLOPM_VOL 73 +#define LINE2R_2_MONOLOPM_VOL 76 +#define PGAL_2_MONOLOPM_VOL 74 +#define PGAR_2_MONOLOPM_VOL 77 +#define DACL1_2_MONOLOPM_VOL 75 +#define DACR1_2_MONOLOPM_VOL 78 +#define MONOLOPM_CTRL 79 +/* Line Output Plus/Minus control registers */ +#define LINE2L_2_LLOPM_VOL 80 +#define LINE2R_2_RLOPM_VOL 90 +#define PGAL_2_LLOPM_VOL 81 +#define PGAR_2_RLOPM_VOL 91 +#define DACL1_2_LLOPM_VOL 82 +#define DACR1_2_RLOPM_VOL 92 +#define LLOPM_CTRL 86 +#define RLOPM_CTRL 93 +/* Clock generation control register */ +#define AIC3X_CLKGEN_CTRL_REG 102 + +/* Page select register bits */ +#define PAGE0_SELECT 0 +#define PAGE1_SELECT 1 + +/* Audio serial data interface control register A bits */ +#define BIT_CLK_MASTER 0x80 +#define WORD_CLK_MASTER 0x40 + +/* Codec Datapath setup register 7 */ +#define FSREF_44100 (1 << 7) +#define FSREF_48000 (0 << 7) +#define DUAL_RATE_MODE ((1 << 5) | (1 << 6)) +#define LDAC2LCH (0x1 << 3) +#define RDAC2RCH (0x1 << 1) + +/* PLL registers bitfields */ +#define PLLP_SHIFT 0 +#define PLLR_SHIFT 0 +#define PLLJ_SHIFT 2 +#define PLLD_MSB_SHIFT 0 +#define PLLD_LSB_SHIFT 2 + +/* Clock generation register bits */ +#define PLL_CLKIN_SHIFT 4 +#define MCLK_SOURCE 0x0 +#define PLL_CLKDIV_SHIFT 0 + +/* Software reset register bits */ +#define SOFT_RESET 0x80 + +/* PLL progrramming register A bits */ +#define PLL_ENABLE 0x80 + +/* Route bits */ +#define ROUTE_ON 0x80 + +/* Mute bits */ +#define UNMUTE 0x08 +#define MUTE_ON 0x80 + +/* Power bits */ +#define LADC_PWR_ON 0x04 +#define RADC_PWR_ON 0x04 +#define LDAC_PWR_ON 0x80 +#define RDAC_PWR_ON 0x40 +#define HPLOUT_PWR_ON 0x01 +#define HPROUT_PWR_ON 0x01 +#define HPLCOM_PWR_ON 0x01 +#define HPRCOM_PWR_ON 0x01 +#define MONOLOPM_PWR_ON 0x01 +#define LLOPM_PWR_ON 0x01 +#define RLOPM_PWR_ON 0x01 + +#define INVERT_VOL(val) (0x7f - val) + +/* Default output volume (inverted) */ +#define DEFAULT_VOL INVERT_VOL(0x50) +/* Default input volume */ +#define DEFAULT_GAIN 0x20 + +struct aic3x_setup_data { + unsigned short i2c_address; +}; + +extern struct snd_soc_codec_dai aic3x_dai; +extern struct snd_soc_codec_device soc_codec_dev_aic3x; + +#endif /* _AIC3X_H */ diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 7ca0b52..9c33fe8 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -19,7 +19,6 @@ #include <linux/pm.h> #include <linux/i2c.h> #include <linux/platform_device.h> -#include <sound/driver.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -562,13 +561,13 @@ static int wm8731_init(struct snd_soc_device *socdev) /* set the update bits */ reg = wm8731_read_reg_cache(codec, WM8731_LOUT1V); - wm8731_write(codec, WM8731_LOUT1V, reg | 0x0100); + wm8731_write(codec, WM8731_LOUT1V, reg & ~0x0100); reg = wm8731_read_reg_cache(codec, WM8731_ROUT1V); - wm8731_write(codec, WM8731_ROUT1V, reg | 0x0100); + wm8731_write(codec, WM8731_ROUT1V, reg & ~0x0100); reg = wm8731_read_reg_cache(codec, WM8731_LINVOL); - wm8731_write(codec, WM8731_LINVOL, reg | 0x0100); + wm8731_write(codec, WM8731_LINVOL, reg & ~0x0100); reg = wm8731_read_reg_cache(codec, WM8731_RINVOL); - wm8731_write(codec, WM8731_RINVOL, reg | 0x0100); + wm8731_write(codec, WM8731_RINVOL, reg & ~0x0100); wm8731_add_controls(codec); wm8731_add_widgets(codec); diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c index 28684ee..77a857b 100644 --- a/sound/soc/codecs/wm8750.c +++ b/sound/soc/codecs/wm8750.c @@ -19,7 +19,6 @@ #include <linux/pm.h> #include <linux/i2c.h> #include <linux/platform_device.h> -#include <sound/driver.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -189,7 +188,7 @@ SOC_ENUM("Bass Boost", wm8750_enum[0]), SOC_ENUM("Bass Filter", wm8750_enum[1]), SOC_SINGLE("Bass Volume", WM8750_BASS, 0, 15, 1), -SOC_SINGLE("Treble Volume", WM8750_TREBLE, 0, 15, 0), +SOC_SINGLE("Treble Volume", WM8750_TREBLE, 0, 15, 1), SOC_ENUM("Treble Cut-off", wm8750_enum[2]), SOC_SINGLE("3D Switch", WM8750_3D, 0, 1, 0), diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index efced93..ddd9c71 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -41,13 +41,13 @@ #include <linux/pm.h> #include <linux/i2c.h> #include <linux/platform_device.h> -#include <sound/driver.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> #include <sound/soc-dapm.h> #include <sound/initval.h> +#include <sound/tlv.h> #include <asm/div64.h> #include "wm8753.h" @@ -258,6 +258,8 @@ static int wm8753_set_dai(struct snd_kcontrol *kcontrol, return 1; } +static const DECLARE_TLV_DB_LINEAR(rec_mix_tlv, -1500, 600); + static const struct snd_kcontrol_new wm8753_snd_controls[] = { SOC_DOUBLE_R("PCM Volume", WM8753_LDAC, WM8753_RDAC, 0, 255, 0), @@ -287,8 +289,8 @@ SOC_SINGLE("Bass Volume", WM8753_BASS, 0, 15, 1), SOC_SINGLE("Treble Volume", WM8753_TREBLE, 0, 15, 1), SOC_ENUM("Treble Cut-off", wm8753_enum[2]), -SOC_DOUBLE("Sidetone Capture Volume", WM8753_RECMIX1, 0, 4, 7, 1), -SOC_SINGLE("Voice Sidetone Capture Volume", WM8753_RECMIX2, 0, 7, 1), +SOC_DOUBLE_TLV("Sidetone Capture Volume", WM8753_RECMIX1, 0, 4, 7, 1, rec_mix_tlv), +SOC_SINGLE_TLV("Voice Sidetone Capture Volume", WM8753_RECMIX2, 0, 7, 1, rec_mix_tlv), SOC_DOUBLE_R("Capture Volume", WM8753_LINVOL, WM8753_RINVOL, 0, 63, 0), SOC_DOUBLE_R("Capture ZC Switch", WM8753_LINVOL, WM8753_RINVOL, 6, 1, 0), diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index 986b5d59..590baea 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -19,7 +19,6 @@ #include <linux/version.h> #include <linux/kernel.h> #include <linux/device.h> -#include <sound/driver.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/ac97_codec.h> @@ -102,7 +101,8 @@ SOC_SINGLE("Speaker Playback ZC Switch", AC97_MASTER, 7, 1, 0), SOC_SINGLE("Speaker Playback Invert Switch", AC97_MASTER, 6, 1, 0), SOC_SINGLE("Headphone Playback ZC Switch", AC97_HEADPHONE, 7, 1, 0), SOC_SINGLE("Mono Playback ZC Switch", AC97_MASTER_MONO, 7, 1, 0), -SOC_SINGLE("Mono Playback Volume", AC97_MASTER_MONO, 0, 31, 0), +SOC_SINGLE("Mono Playback Volume", AC97_MASTER_MONO, 0, 31, 1), +SOC_SINGLE("Mono Playback Switch", AC97_MASTER_MONO, 15, 1, 1), SOC_SINGLE("ALC Target Volume", AC97_CODEC_CLASS_REV, 12, 15, 0), SOC_SINGLE("ALC Hold Time", AC97_CODEC_CLASS_REV, 8, 15, 0), @@ -131,7 +131,7 @@ SOC_SINGLE("Aux Playback Headphone Volume", AC97_CD, 12, 7, 1), SOC_SINGLE("Aux Playback Speaker Volume", AC97_CD, 8, 7, 1), SOC_SINGLE("Aux Playback Phone Volume", AC97_CD, 4, 7, 1), -SOC_SINGLE("Phone Volume", AC97_PHONE, 0, 15, 0), +SOC_SINGLE("Phone Volume", AC97_PHONE, 0, 15, 1), SOC_DOUBLE("Line Capture Volume", AC97_LINE, 8, 0, 31, 1), SOC_SINGLE("Capture 20dB Boost Switch", AC97_REC_SEL, 14, 1, 0), @@ -145,8 +145,8 @@ SOC_ENUM("Bass Control", wm9712_enum[5]), SOC_SINGLE("Bass Cut-off Switch", AC97_MASTER_TONE, 12, 1, 1), SOC_SINGLE("Tone Cut-off Switch", AC97_MASTER_TONE, 4, 1, 1), SOC_SINGLE("Playback Attenuate (-6dB) Switch", AC97_MASTER_TONE, 6, 1, 0), -SOC_SINGLE("Bass Volume", AC97_MASTER_TONE, 8, 15, 0), -SOC_SINGLE("Treble Volume", AC97_MASTER_TONE, 0, 15, 0), +SOC_SINGLE("Bass Volume", AC97_MASTER_TONE, 8, 15, 1), +SOC_SINGLE("Treble Volume", AC97_MASTER_TONE, 0, 15, 1), SOC_SINGLE("Capture ADC Switch", AC97_REC_GAIN, 15, 1, 1), SOC_ENUM("Capture Volume Steps", wm9712_enum[6]), |