diff options
Diffstat (limited to 'sound/soc')
-rw-r--r-- | sound/soc/atmel/atmel_ssc_dai.c | 2 | ||||
-rw-r--r-- | sound/soc/codecs/alc5623.c | 2 | ||||
-rw-r--r-- | sound/soc/codecs/lm4857.c | 2 | ||||
-rw-r--r-- | sound/soc/codecs/sn95031.c | 2 | ||||
-rw-r--r-- | sound/soc/codecs/tlv320aic26.h | 4 | ||||
-rw-r--r-- | sound/soc/codecs/tlv320aic3x.c | 2 | ||||
-rw-r--r-- | sound/soc/codecs/tlv320dac33.c | 2 | ||||
-rw-r--r-- | sound/soc/codecs/twl4030.c | 6 | ||||
-rw-r--r-- | sound/soc/codecs/wm8580.c | 2 | ||||
-rw-r--r-- | sound/soc/codecs/wm8753.c | 2 | ||||
-rw-r--r-- | sound/soc/codecs/wm8904.c | 2 | ||||
-rw-r--r-- | sound/soc/codecs/wm8955.c | 2 | ||||
-rw-r--r-- | sound/soc/codecs/wm8962.c | 2 | ||||
-rw-r--r-- | sound/soc/codecs/wm8991.c | 2 | ||||
-rw-r--r-- | sound/soc/codecs/wm8993.c | 2 | ||||
-rw-r--r-- | sound/soc/codecs/wm9081.c | 4 | ||||
-rw-r--r-- | sound/soc/imx/imx-ssi.c | 2 | ||||
-rw-r--r-- | sound/soc/kirkwood/kirkwood-dma.c | 4 | ||||
-rw-r--r-- | sound/soc/mid-x86/sst_platform.c | 4 | ||||
-rw-r--r-- | sound/soc/omap/ams-delta.c | 6 | ||||
-rw-r--r-- | sound/soc/samsung/neo1973_wm8753.c | 4 | ||||
-rw-r--r-- | sound/soc/sh/fsi.c | 1 | ||||
-rw-r--r-- | sound/soc/soc-jack.c | 2 |
23 files changed, 33 insertions, 30 deletions
diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c index 5d230ce..7fbfa05 100644 --- a/sound/soc/atmel/atmel_ssc_dai.c +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -672,7 +672,7 @@ static int atmel_ssc_resume(struct snd_soc_dai *cpu_dai) /* re-enable interrupts */ ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr); - /* Re-enable recieve and transmit as appropriate */ + /* Re-enable receive and transmit as appropriate */ cr = 0; cr |= (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0; diff --git a/sound/soc/codecs/alc5623.c b/sound/soc/codecs/alc5623.c index 4f377c9..eecffb5 100644 --- a/sound/soc/codecs/alc5623.c +++ b/sound/soc/codecs/alc5623.c @@ -481,7 +481,7 @@ struct _pll_div { }; /* Note : pll code from original alc5623 driver. Not sure of how good it is */ -/* usefull only for master mode */ +/* useful only for master mode */ static const struct _pll_div codec_master_pll_div[] = { { 2048000, 8192000, 0x0ea0}, diff --git a/sound/soc/codecs/lm4857.c b/sound/soc/codecs/lm4857.c index 72de47e..2c2a681 100644 --- a/sound/soc/codecs/lm4857.c +++ b/sound/soc/codecs/lm4857.c @@ -161,7 +161,7 @@ static const struct snd_kcontrol_new lm4857_controls[] = { lm4857_get_mode, lm4857_set_mode), }; -/* There is a demux inbetween the the input signal and the output signals. +/* There is a demux between the input signal and the output signals. * Currently there is no easy way to model it in ASoC and since it does not make * much of a difference in practice simply connect the input direclty to the * outputs. */ diff --git a/sound/soc/codecs/sn95031.c b/sound/soc/codecs/sn95031.c index f70977d..84ffdeb 100644 --- a/sound/soc/codecs/sn95031.c +++ b/sound/soc/codecs/sn95031.c @@ -26,7 +26,9 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/platform_device.h> +#include <linux/delay.h> #include <linux/slab.h> + #include <asm/intel_scu_ipc.h> #include <sound/pcm.h> #include <sound/pcm_params.h> diff --git a/sound/soc/codecs/tlv320aic26.h b/sound/soc/codecs/tlv320aic26.h index 62b1f22..67f19c3 100644 --- a/sound/soc/codecs/tlv320aic26.h +++ b/sound/soc/codecs/tlv320aic26.h @@ -14,14 +14,14 @@ #define AIC26_PAGE_ADDR(page, offset) ((page << 6) | offset) #define AIC26_NUM_REGS AIC26_PAGE_ADDR(3, 0) -/* Page 0: Auxillary data registers */ +/* Page 0: Auxiliary data registers */ #define AIC26_REG_BAT1 AIC26_PAGE_ADDR(0, 0x05) #define AIC26_REG_BAT2 AIC26_PAGE_ADDR(0, 0x06) #define AIC26_REG_AUX AIC26_PAGE_ADDR(0, 0x07) #define AIC26_REG_TEMP1 AIC26_PAGE_ADDR(0, 0x09) #define AIC26_REG_TEMP2 AIC26_PAGE_ADDR(0, 0x0A) -/* Page 1: Auxillary control registers */ +/* Page 1: Auxiliary control registers */ #define AIC26_REG_AUX_ADC AIC26_PAGE_ADDR(1, 0x00) #define AIC26_REG_STATUS AIC26_PAGE_ADDR(1, 0x01) #define AIC26_REG_REFERENCE AIC26_PAGE_ADDR(1, 0x03) diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index 3bedab2..6c43c13 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -884,7 +884,7 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream, if (bypass_pll) return 0; - /* Use PLL, compute apropriate setup for j, d, r and p, the closest + /* Use PLL, compute appropriate setup for j, d, r and p, the closest * one wins the game. Try with d==0 first, next with d!=0. * Constraints for j are according to the datasheet. * The sysclk is divided by 1000 to prevent integer overflows. diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c index eb1a0b4..082e9d5 100644 --- a/sound/soc/codecs/tlv320dac33.c +++ b/sound/soc/codecs/tlv320dac33.c @@ -1027,7 +1027,7 @@ static int dac33_prepare_chip(struct snd_pcm_substream *substream) /* * For FIFO bypass mode: * Enable the FIFO bypass (Disable the FIFO use) - * Set the BCLK as continous + * Set the BCLK as continuous */ fifoctrl_a |= DAC33_FBYPAS; aictrl_b |= DAC33_BCLKON; diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index 8512800..575238d 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -281,7 +281,7 @@ static inline void twl4030_check_defaults(struct snd_soc_codec *codec) i, val, twl4030_reg[i]); } } - dev_dbg(codec->dev, "Found %d non maching registers. %s\n", + dev_dbg(codec->dev, "Found %d non-matching registers. %s\n", difference, difference ? "Not OK" : "OK"); } @@ -2018,7 +2018,7 @@ static int twl4030_voice_startup(struct snd_pcm_substream *substream, u8 mode; /* If the system master clock is not 26MHz, the voice PCM interface is - * not avilable. + * not available. */ if (twl4030->sysclk != 26000) { dev_err(codec->dev, "The board is configured for %u Hz, while" @@ -2028,7 +2028,7 @@ static int twl4030_voice_startup(struct snd_pcm_substream *substream, } /* If the codec mode is not option2, the voice PCM interface is not - * avilable. + * available. */ mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE) & TWL4030_OPT_MODE; diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c index 8f6b5ee..4bbc0a7 100644 --- a/sound/soc/codecs/wm8580.c +++ b/sound/soc/codecs/wm8580.c @@ -772,7 +772,7 @@ static int wm8580_set_bias_level(struct snd_soc_codec *codec, reg &= ~(WM8580_PWRDN1_PWDN | WM8580_PWRDN1_ALLDACPD); snd_soc_write(codec, WM8580_PWRDN1, reg); - /* Make VMID high impedence */ + /* Make VMID high impedance */ reg = snd_soc_read(codec, WM8580_ADC_CONTROL1); reg &= ~0x100; snd_soc_write(codec, WM8580_ADC_CONTROL1, reg); diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index 3f09dee..ffa2ffe 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -1312,7 +1312,7 @@ static int wm8753_set_bias_level(struct snd_soc_codec *codec, SNDRV_PCM_FMTBIT_S24_LE) /* - * The WM8753 supports upto 4 different and mutually exclusive DAI + * The WM8753 supports up to 4 different and mutually exclusive DAI * configurations. This gives 2 PCM's available for use, hifi and voice. * NOTE: The Voice PCM cannot play or capture audio to the CPU as it's DAI * is connected between the wm8753 and a BT codec or GSM modem. diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 443ae58..9b3bba4 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -1895,7 +1895,7 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref, pr_debug("Fvco=%dHz\n", target); - /* Find an appropraite FLL_FRATIO and factor it out of the target */ + /* Find an appropriate FLL_FRATIO and factor it out of the target */ for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) { if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) { fll_div->fll_fratio = fll_fratios[i].fll_fratio; diff --git a/sound/soc/codecs/wm8955.c b/sound/soc/codecs/wm8955.c index 5e0214d..3c71987 100644 --- a/sound/soc/codecs/wm8955.c +++ b/sound/soc/codecs/wm8955.c @@ -176,7 +176,7 @@ static int wm8995_pll_factors(struct device *dev, return 0; } -/* Lookup table specifiying SRATE (table 25 in datasheet); some of the +/* Lookup table specifying SRATE (table 25 in datasheet); some of the * output frequencies have been rounded to the standard frequencies * they are intended to match where the error is slight. */ static struct { diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 3b71dd6..500011e 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -3137,7 +3137,7 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref, pr_debug("FLL Fvco=%dHz\n", target); - /* Find an appropraite FLL_FRATIO and factor it out of the target */ + /* Find an appropriate FLL_FRATIO and factor it out of the target */ for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) { if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) { fll_div->fll_fratio = fll_fratios[i].fll_fratio; diff --git a/sound/soc/codecs/wm8991.c b/sound/soc/codecs/wm8991.c index 28fdfd6..3c2ee1b 100644 --- a/sound/soc/codecs/wm8991.c +++ b/sound/soc/codecs/wm8991.c @@ -981,7 +981,7 @@ static int wm8991_set_dai_pll(struct snd_soc_dai *codec_dai, reg = snd_soc_read(codec, WM8991_CLOCKING_2); snd_soc_write(codec, WM8991_CLOCKING_2, reg | WM8991_SYSCLK_SRC); - /* set up N , fractional mode and pre-divisor if neccessary */ + /* set up N , fractional mode and pre-divisor if necessary */ snd_soc_write(codec, WM8991_PLL1, pll_div.n | WM8991_SDM | (pll_div.div2 ? WM8991_PRESCALE : 0)); snd_soc_write(codec, WM8991_PLL2, (u8)(pll_div.k>>8)); diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c index 379fa22..056aef9 100644 --- a/sound/soc/codecs/wm8993.c +++ b/sound/soc/codecs/wm8993.c @@ -324,7 +324,7 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref, pr_debug("Fvco=%dHz\n", target); - /* Find an appropraite FLL_FRATIO and factor it out of the target */ + /* Find an appropriate FLL_FRATIO and factor it out of the target */ for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) { if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) { fll_div->fll_fratio = fll_fratios[i].fll_fratio; diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c index 55cdf29..91c6b39 100644 --- a/sound/soc/codecs/wm9081.c +++ b/sound/soc/codecs/wm9081.c @@ -305,7 +305,7 @@ static int speaker_mode_get(struct snd_kcontrol *kcontrol, /* * Stop any attempts to change speaker mode while the speaker is enabled. * - * We also have some special anti-pop controls dependant on speaker + * We also have some special anti-pop controls dependent on speaker * mode which must be changed along with the mode. */ static int speaker_mode_put(struct snd_kcontrol *kcontrol, @@ -456,7 +456,7 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref, pr_debug("Fvco=%dHz\n", target); - /* Find an appropraite FLL_FRATIO and factor it out of the target */ + /* Find an appropriate FLL_FRATIO and factor it out of the target */ for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) { if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) { fll_div->fll_fratio = fll_fratios[i].fll_fratio; diff --git a/sound/soc/imx/imx-ssi.c b/sound/soc/imx/imx-ssi.c index c331d65..5b13fec 100644 --- a/sound/soc/imx/imx-ssi.c +++ b/sound/soc/imx/imx-ssi.c @@ -16,7 +16,7 @@ * sane processor vendors have a FIFO per AC97 slot, the i.MX has only * one FIFO which combines all valid receive slots. We cannot even select * which slots we want to receive. The WM9712 with which this driver - * was developped with always sends GPIO status data in slot 12 which + * was developed with always sends GPIO status data in slot 12 which * we receive in our (PCM-) data stream. The only chance we have is to * manually skip this data in the FIQ handler. With sampling rates different * from 48000Hz not every frame has valid receive data, so the ratio diff --git a/sound/soc/kirkwood/kirkwood-dma.c b/sound/soc/kirkwood/kirkwood-dma.c index 0fd6a63..e13c6ce 100644 --- a/sound/soc/kirkwood/kirkwood-dma.c +++ b/sound/soc/kirkwood/kirkwood-dma.c @@ -132,7 +132,7 @@ static int kirkwood_dma_open(struct snd_pcm_substream *substream) priv = snd_soc_dai_get_dma_data(cpu_dai, substream); snd_soc_set_runtime_hwparams(substream, &kirkwood_dma_snd_hw); - /* Ensure that all constraints linked to dma burst are fullfilled */ + /* Ensure that all constraints linked to dma burst are fulfilled */ err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_BUFFER_BYTES, priv->burst * 2, @@ -170,7 +170,7 @@ static int kirkwood_dma_open(struct snd_pcm_substream *substream) /* * Enable Error interrupts. We're only ack'ing them but - * it's usefull for diagnostics + * it's useful for diagnostics */ writel((unsigned long)-1, priv->io + KIRKWOOD_ERR_MASK); } diff --git a/sound/soc/mid-x86/sst_platform.c b/sound/soc/mid-x86/sst_platform.c index d827edb..9765fb8 100644 --- a/sound/soc/mid-x86/sst_platform.c +++ b/sound/soc/mid-x86/sst_platform.c @@ -446,7 +446,7 @@ static int sst_platform_remove(struct platform_device *pdev) snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(sst_platform_dai)); snd_soc_unregister_platform(&pdev->dev); - pr_debug("sst_platform_remove sucess\n"); + pr_debug("sst_platform_remove success\n"); return 0; } @@ -469,7 +469,7 @@ module_init(sst_soc_platform_init); static void __exit sst_soc_platform_exit(void) { platform_driver_unregister(&sst_platform_driver); - pr_debug("sst_soc_platform_exit sucess\n"); + pr_debug("sst_soc_platform_exit success\n"); } module_exit(sst_soc_platform_exit); diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/omap/ams-delta.c index 3167be6..462cbcb 100644 --- a/sound/soc/omap/ams-delta.c +++ b/sound/soc/omap/ams-delta.c @@ -248,7 +248,7 @@ static struct snd_soc_jack_pin ams_delta_hook_switch_pins[] = { */ /* To actually apply any modem controlled configuration changes to the codec, - * we must connect codec DAI pins to the modem for a moment. Be carefull not + * we must connect codec DAI pins to the modem for a moment. Be careful not * to interfere with our digital mute function that shares the same hardware. */ static struct timer_list cx81801_timer; static bool cx81801_cmd_pending; @@ -402,9 +402,9 @@ static struct tty_ldisc_ops cx81801_ops = { /* - * Even if not very usefull, the sound card can still work without any of the + * Even if not very useful, the sound card can still work without any of the * above functonality activated. You can still control its audio input/output - * constellation and speakerphone gain from userspace by issueing AT commands + * constellation and speakerphone gain from userspace by issuing AT commands * over the modem port. */ diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c index 78bfdb3..4522309 100644 --- a/sound/soc/samsung/neo1973_wm8753.c +++ b/sound/soc/samsung/neo1973_wm8753.c @@ -228,7 +228,7 @@ static const struct snd_kcontrol_new neo1973_wm8753_controls[] = { SOC_DAPM_PIN_SWITCH("Handset Mic"), }; -/* GTA02 specific routes and controlls */ +/* GTA02 specific routes and controls */ #ifdef CONFIG_MACH_NEO1973_GTA02 @@ -372,7 +372,7 @@ static int neo1973_wm8753_init(struct snd_soc_pcm_runtime *rtd) return 0; } -/* GTA01 specific controlls */ +/* GTA01 specific controls */ #ifdef CONFIG_MACH_NEO1973_GTA01 diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c index 5843158..23c0e83 100644 --- a/sound/soc/sh/fsi.c +++ b/sound/soc/sh/fsi.c @@ -1330,3 +1330,4 @@ module_exit(fsi_mobile_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("SuperH onchip FSI audio driver"); MODULE_AUTHOR("Kuninori Morimoto <morimoto.kuninori@renesas.com>"); +MODULE_ALIAS("platform:fsi-pcm-audio"); diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c index 6203a72..7c17b98 100644 --- a/sound/soc/soc-jack.c +++ b/sound/soc/soc-jack.c @@ -331,7 +331,7 @@ int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count, goto err; if (gpios[i].wake) { - ret = set_irq_wake(gpio_to_irq(gpios[i].gpio), 1); + ret = irq_set_irq_wake(gpio_to_irq(gpios[i].gpio), 1); if (ret != 0) printk(KERN_ERR "Failed to mark GPIO %d as wake source: %d\n", |