summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-12-11arm: ls1021a: remove the FSL_SOC config added by SOC_LS1021AJingchang Lu
Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Change-Id: I2deac22e04a04c2523c7839d5974a41288e5bb2b Reviewed-on: http://git.am.freescale.net:8181/17837 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Huan Wang <alison.wang@freescale.com> Reviewed-by: Li Xiubo <Li.Xiubo@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11arm: dts: ls1021a: change duart compatible to "fsl,16550-FIFO64"Jingchang Lu
this patch change the duart compatible to 64-byte FIFO mode. Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Change-Id: I4d306671daed4262a6f354a3507304d82468c41d Reviewed-on: http://git.am.freescale.net:8181/17835 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Huan Wang <alison.wang@freescale.com> Reviewed-by: Li Xiubo <Li.Xiubo@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11arm: configs: add Freescale LS1021A initial defconfigJingchang Lu
Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Change-Id: Ia3ba1dbeb66d4c929cfe19122d221a2af36377f8 Reviewed-on: http://git.am.freescale.net:8181/17838 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Huan Wang <alison.wang@freescale.com> Reviewed-by: Li Xiubo <Li.Xiubo@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11dmaengine: fsl-edma: add dma memcpy supportJingchang Lu
The eDMA channel support the mem2mem copy with the always on slot number 63. Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
2014-12-11dmaengine: fsl-edma: swap 8-/16-bit registers offset in big-endian modeJingchang Lu
As the IP design, all 8-bit and 16-bit registers offset adddress should be swapped in big-endian mode opposite to little-endian mode. Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
2014-12-11dmaengine: fsl-edma: fix dmamux index calculating errorJingchang Lu
Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> --- This patch has been sent to upstream: https://patchwork.kernel.org/patch/4457391/
2014-12-11dma: fix eDMA driver as a subsys_initcallYuan Yao
Because of some driver base on DMA, changed the initcall order as subsys_initcall. Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> --- This patch is pulled back from upstream: commit 8edc51c197b8f409bef7b21755254e6f3ce7ed23
2014-12-11dma: fsl-edma: fix static checker warning of NULL dereferenceJingchang Lu
The static checker reports following warning: drivers/dma/fsl-edma.c:732 fsl_edma_xlate() error: we previously assumed 'chan' could be null (see line 737) The changes of the loop cursor in the iteration may result in NULL dereference when dma_get_slave_channel failed but loop will continue. So use list_for_each_entry_safe() instead of list_for_each_entry() to against this. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jingchang Lu <b35083@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> --- This patch is pulled back from upstream: commit 178c81e58e91559fd2c6b1cae43c8f573a2ead36
2014-12-11dma: Add Freescale eDMA engine driver supportJingchang Lu
Add Freescale enhanced direct memory(eDMA) controller support. This module can be found on Vybrid and LS-1 SoCs. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Jingchang Lu <b35083@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com> --- This patch is pulled back from upstream: commit d6be34fbd39b7d577d25cb4edec538e8990ba07c
2014-12-11tty: serial: fsl_lpuart: add 32-bit register interface supportJingchang Lu
This add the big-endian 32-bit register version LPUART support. Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> --- This patch has been sent to upstream: https://patchwork.kernel.org/patch/4544291/
2014-12-11dt-binding: fsl-lpuart: use exact SoC revision to document bindingJingchang Lu
use exact SoC revision instead of wildcard describing to make the binding more clearer. Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> --- This patch has been sent to upstream: https://patchwork.kernel.org/patch/4544291/
2014-12-11ARM: imx: Add Freescale LS1021A SMP supportJingchang Lu
Freescale LS1021A SoC deploys two cortex-A7 processors, this adds bring-up support for the secondary core. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> --- This patch has been sent to upstream for review: https://patchwork.kernel.org/patch/4464481/
2014-12-11ARM: imx: Add initial support for Freescale LS1021AJingchang Lu
The LS1021A SoC is a dual-core Cortex-A7 based processor, this add the initial support for it. Signed-off-by: Jingchang Lu <b35083@freescale.com> --- This patch has been sent to upstream for review: https://patchwork.kernel.org/patch/4464451/
2014-12-11dt-bindings: arm: add Freescale LS1021A SoC specific devict tree bindingJingchang Lu
Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
2014-12-11ARM: dts: Add initial LS1021A TWR board dts supportJingchang Lu
Signed-off-by: Chen Lu <B46807@freescale.com> Signed-off-by: Chao Fu <B44548@freescale.com> Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> --- This patch has been sent to upstream for review: https://patchwork.kernel.org/patch/4464461/
2014-12-11ARM: dts: Add initial LS1021A QDS board dts supportJingchang Lu
Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Chao Fu <B44548@freescale.com> Signed-off-by: Jason Jin <Jason.Jin@freescale.com> Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Zhao Qiang <B45475@freescale.com> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: Jaiprakash Singh <b44839@freescale.com> Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> --- This patch has been sent to upstream for review: https://patchwork.kernel.org/patch/4464471/
2014-12-11ARM: dts: Add SoC level device tree support for LS1021AJingchang Lu
Add Freescale LS1021A SoC device tree support Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com> Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com> Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Adrian Sendroiu <adrian.sendroiu@freescale.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: Jaiprakash Singh <b44839@freescale.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Chao Fu <b44548@freescale.com> Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Zhao Qiang <B45475@freescale.com> Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com> Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> --- This patch has been sent to upstream for review: https://patchwork.kernel.org/patch/4464491/
2014-12-11clk: ppc-corenet: Add CLK_OF_DECLARE supportJingchang Lu
Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
2014-12-11clk: ppc-corenet: Fix Section mismatch warningJingchang Lu
WARNING: drivers/built-in.o(.data+0x10258): Section mismatch in reference from the variable ppc_corenet_clk_driver to the (unknown reference) .init.rodata:(unknown) The variable ppc_corenet_clk_driver references the (unknown reference) __initconst (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> --- This patch is pulled back from upstream: commit da788acb28386aa896224e784954bb73c99ff26c
2014-12-11ARM: call of_clk_init from default time_init handlerSebastian Hesselbarth
Most DT ARM machs require common clock providers initialized before timers. Currently, arch/arm machs use .init_time to call of_clk_init right before clocksource_of_init. This prevents to remove that callback and use the default one instead. This patch adds a call to of_clk_init() to the default .init_time callback for COMMON_CLK enabled machs to allow to remove custom callbacks where applicable. While at it, also reorder includes alphabetically. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> --- This patch is pulled back from upstream: commit 4178bac4f6e955869395b30246687d41183a5edb
2014-12-11powerpc/e6500: Work around erratum A-008139Scott Wood
Erratum A-008139 can cause duplicate TLB entries if an indirect entry is overwritten using tlbwe while the other thread is using it to do a lookup. Work around this by using tlbilx to invalidate prior to overwriting. To avoid the need to save another register to hold MAS1 during the workaround code, TID clearing has been moved from tlb_miss_kernel_e6500 until after the SMT section. Signed-off-by: Scott Wood <scottwood@freescale.com> (cherry picked from commit 48cd9b5d590aee1664170968a9eae068e36761eb) Change-Id: I34cc02219f9081dbf8ff7729677a995b7a8bb4c5 Reviewed-on: http://git.am.freescale.net:8181/19463 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Scott Wood <scottwood@freescale.com> Reviewed-by: Mihai Caraman <mihai.caraman@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
2014-12-11Merge commit '60cce3da4a8393d1e15bf1a9dbe3956a8aaabbaf'Rich Schmitt
2014-12-11offline_port: fix dt parser for tx frame queuesMarian Cristian Rotariu
With the current implementation the user has the possibility to initialize some queues that exit the offline port. The format of the device tree format is: fsl,qman-frame-queues-egress = <base_id1 count1 ... base_idn countn>; fsl,qman-channel-ids-egress = <channel_id1 ... channel_idn>; Intuitively, the base_id1, count1 frame queues batch are placed in the channel_id1 QMan channel. Because the list_add() adds an entry at the beginning of the list, the map between the frame queues and their channel ID is reversed. This patch adds a particular entry at the end of the fq list using list_add_tail() function. Signed-off-by: Marian Cristian Rotariu <marian.rotariu@freescale.com> Change-Id: I8d3a2fd3c36f63d15837ffe90bf6e4e8b041a3e5 Reviewed-on: http://git.am.freescale.net:8181/20154 Reviewed-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com> Tested-by: Marian Cristian Rotariu <marian.rotariu@freescale.com>
2014-10-19fmd: force port down when qbmi busyMandy Lavi
Change-Id: I17411cd51bb88c5294bbdf97b8bd18609a00a7f6 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/17708 Reviewed-by: Igal Liberman <Igal.Liberman@freescale.com> Reviewed-by: Mandy Lavi <Mandy.Lavi@freescale.com> Tested-by: Mandy Lavi <Mandy.Lavi@freescale.com>
2014-10-19fmd: add new dtsi file for fmanV3LMandy Lavi
Change-Id: I65f6c770784cdf4ff8e5a16283597aec86daee56 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/17428 Reviewed-by: Igal Liberman <Igal.Liberman@freescale.com> Reviewed-by: Mandy Lavi <Mandy.Lavi@freescale.com> Tested-by: Mandy Lavi <Mandy.Lavi@freescale.com>
2014-10-08fmd: add total-fifo-size attribute to binding docMandy Lavi
Change-Id: I1e757f85419d66bfca4bbf6d4097a871c3b68bc8 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/16878 Reviewed-by: Mandy Lavi <Mandy.Lavi@freescale.com> Tested-by: Mandy Lavi <Mandy.Lavi@freescale.com>
2014-10-08dpaa_eth: accept minimum MTU of at least 68Madalin Bucur
RFC 791 states that the minimum MTU needs to be 68 in order to allow datagram forwarding without further fragmentation. Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Change-Id: I4f9602c49a5a9aaac0030f511a6abbf32954f82f Reviewed-on: http://git.am.freescale.net:8181/17073 Reviewed-by: Ruxandra Ioana Radulescu <ruxandra.radulescu@freescale.com>
2014-10-08dpaa_eth: add required and active PAUSE frame settingsCristian Bercaru
Because the pause frame settings of a MAC device are forced to false when the link goes half-duplex and cannot be restored if autonegotiation is disabled, this patch introduces 2 sets of settings: requested and active. Requested settings are introduced by the users, via user-space programs such as ethtool, whereas active settings reflect whether FMan truly enables/disables PAUSE frames on TX/RX. Requested settings can only be changed by the user. Active settings can be changed by events such as auto-negotiation or a change in link duplexity and are derived from requested settings. Signed-off-by: Cristian Bercaru <cristian.bercaru@freescale.com> Change-Id: I5ea563614b28d6ba1827b571097861d39ff8751a Reviewed-on: http://git.am.freescale.net:8181/15553 Reviewed-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com>
2014-10-08dpaa_eth: change type of PAUSE frame settings to booleanCristian Bercaru
This patch changes the type of PAUSE frames settings to boolean because they only accept the values true/false. Signed-off-by: Cristian Bercaru <cristian.bercaru@freescale.com> Change-Id: I6a3926054d4821f12937e96198c8435df38bf95c Reviewed-on: http://git.am.freescale.net:8181/15552 Reviewed-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com> Tested-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com>
2014-10-08fmd: use proper return valueMadalin Bucur
Channel value is uint16_t, return adequate type. Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Change-Id: I4295b7f706e9db36ac9d6d02b8896fa11067f612 Reviewed-on: http://git.am.freescale.net:8181/18840 Reviewed-by: Marian Cristian Rotariu <marian.rotariu@freescale.com>
2014-10-08fmd: fix casting warningMandy Lavi
Coverity issue Change-Id: If0a7e1dffa09e3513b7ccb13a1dc09bf91056238 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/18831 Reviewed-by: Mandy Lavi <Mandy.Lavi@freescale.com> Tested-by: Mandy Lavi <Mandy.Lavi@freescale.com> Reviewed-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com>
2014-10-08dpaa_eth: add explicit cast where neededMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Change-Id: I20f1609771d66778acfbbca65e6d0b8ceecb326a Reviewed-on: http://git.am.freescale.net:8181/19077 Reviewed-by: Marian Cristian Rotariu <marian.rotariu@freescale.com>
2014-10-08dpaa_eth: fix dpa_bp_drain()Madalin Bucur
The continue jumps to the end of the loop, condition is evaluated and if ret is not > 0 the loop ends. Setting ret to 1 to continue processing until pool is drained. Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Change-Id: If0acf0eba9e1fc814ef61b939d717819a48c7e29 Reviewed-on: http://git.am.freescale.net:8181/19071 Reviewed-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com> Reviewed-by: Marian Cristian Rotariu <marian.rotariu@freescale.com>
2014-10-08dpaa_eth: add explicit cast where neededMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Change-Id: Idc795a681df8b11532e1fdbd2f18c365bfa8a671 Reviewed-on: http://git.am.freescale.net:8181/19007 Reviewed-by: Marian Cristian Rotariu <marian.rotariu@freescale.com>
2014-10-08dpaa_eth: add static qualifierMadalin Bucur
Add static qualifier for several functions. Change channel parameter type to uint16_t. Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Change-Id: I759e8174d9bfe915ee11f25f572160d33bf4a9d3 Reviewed-on: http://git.am.freescale.net:8181/18843 Reviewed-by: Marian Cristian Rotariu <marian.rotariu@freescale.com>
2014-10-08dpaa_eth: add comment about unused error codeMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Change-Id: Ica8066db566093bc89e50c23694b519820bf7ae8 Reviewed-on: http://git.am.freescale.net:8181/18842 Reviewed-by: Marian Cristian Rotariu <marian.rotariu@freescale.com>
2014-10-08dpaa_eth: verify return valueMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Change-Id: Ife32e1984f5dc8f481dad223602163229526b861 Reviewed-on: http://git.am.freescale.net:8181/18841 Reviewed-by: Marian Cristian Rotariu <marian.rotariu@freescale.com>
2014-10-08dpaa_eth: add explicit cast where neededMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Change-Id: I6fe0041436e52d76a0677380935d15d8363ddbeb Reviewed-on: http://git.am.freescale.net:8181/18839 Reviewed-by: Marian Cristian Rotariu <marian.rotariu@freescale.com>
2014-10-08dpaa_eth: fix dpa_get_channel return value checkMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Change-Id: I5594b9f26210f9a7237bdd51f529d40a2b008115 Reviewed-on: http://git.am.freescale.net:8181/17400 Reviewed-by: Cristian Bercaru <cristian.bercaru@freescale.com>
2014-10-08dpaa_eth: check qman_query_cgr return valueMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Change-Id: I21558e105b5c3092e96b7e98b570e5613e8bc771 Reviewed-on: http://git.am.freescale.net:8181/17399 Reviewed-by: Cristian Bercaru <cristian.bercaru@freescale.com>
2014-09-29fmd: do not apply erratum A005127 on fmanV3LMandy Lavi
Change-Id: I3de0664e687cb75564d08758889c0cd0878acfb4 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/19953 Reviewed-by: Mandy Lavi <Mandy.Lavi@freescale.com> Tested-by: Mandy Lavi <Mandy.Lavi@freescale.com>
2014-09-19FMD: DSAR: Don't disable/enable Tx explicitly. Change call to exit DSAR to ↵Eyal Harari
fm_soc_resume Signed-off-by: Eyal Harari <Eyal.Harari@freesacle.com> Change-Id: I888b95ca0c7f2e13266ecf81c41e779666a6e612 Reviewed-on: http://git.am.freescale.net:8181/19106 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Cristian-Constantin Sovaiala <Cristian.Sovaiala@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
2014-09-17qe-tdm: move siram_init_flag to qe.cZhao Qiang
Signed-off-by: Zhao Qiang <B45475@freescale.com> Change-Id: Id21f861ffec995ad68378a9d2eda245ef989b489 Reviewed-on: http://git.am.freescale.net:8181/19009 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Xiaobo Xie <X.Xie@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
2014-09-17qe-hdlc: qe-hdlc work in normal mode instead of internal-loopback modeZhao Qiang
qe-hdlc worked in internal-loopback without TDMR ds26522, now it can work with TDMR ds26522 in normal mode, so modify it to normal mode. Signed-off-by: Zhao Qiang <B45475@freescale.com> Change-Id: I7eeb4ec196d74cb53f3bffced0889637c72ed5d6 Reviewed-on: http://git.am.freescale.net:8181/19008 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Xiaobo Xie <X.Xie@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
2014-09-17qe-tdm: change to 0 bit delay for normal TDM riser cardZhao Qiang
pq_mds_t1 card need 1 bit delay for qe-tdm, while others doesn't need. Signed-off-by: Zhao Qiang <B45475@freescale.com> Change-Id: I80e3e4c83206b292023e6ecb24867b6cb3b5984f Reviewed-on: http://git.am.freescale.net:8181/19001 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Xiaobo Xie <X.Xie@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
2014-09-17t1040rdb: add slic tdm node to t1040rdbZhao Qiang
add slic tdm node into t1040rdb.dts Signed-off-by: Zhao Qiang <B45475@freescale.com> Change-Id: I1862ebef1b7bfd5a43258afbd62bcfe417dc61c0 Reviewed-on: http://git.am.freescale.net:8181/19000 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Xiaobo Xie <X.Xie@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
2014-09-17Maxim/drver: add driver for maxim ds26522Zhao Qiang
add driver for maxim ds26522 Signed-off-by: Zhao Qiang <B45475@freescale.com> Change-Id: Icc4076540b5a72efa47778b52a7d455038ba2b99 Reviewed-on: http://git.am.freescale.net:8181/18999 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Xiaobo Xie <X.Xie@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
2014-09-05dpaa_eth: merge recycle and confirmation queuesMarian Rotariu
In FMan v3, special transmission queues, called recycle queues, were created because it was believed that the FCO flag from the FD is not enough to differentiate between frames that are recyclable and those who are not. The frame queue flags were used to signal the BMI to release the buffers back to the default buffer pool. The last findings and FMan improvements permit recycling activation only by using FD fields. With this patch, the recycling frame queues are not needed anymore. This patch also removes the code dependency on the FMan version and improves TCP traffic in forwarding scenarios due to single transmission queues, reducing the out-of-order segments. Signed-off-by: Marian Rotariu <marian.rotariu@freescale.com> Change-Id: Idd4fea4ef7883563df67cf21dea9e87435b2dee8 Reviewed-on: http://git.am.freescale.net:8181/16872 Reviewed-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com> Tested-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com>
2014-09-05FMD: DSAR: call device_set_wakeup_enable only for AR. Do it in .suspend and ↵Eyal Harari
.resume Signed-off-by: Eyal Harari <Eyal.Harari@freesacle.com>
2014-09-05T104xRDB/dts: add bqman node placeholder before fman to support ARZhang Zhuoyu
the device tree is walked in a bottom-up order to suspend devices. Callback sequence of devices is determinated by the first time it appears in device tree not where it is defined, thus add two placeholders of bqman before fman to make sure fman suspended before bqman. Signed-off-by: Zhang Zhuoyu <Zhuoyu.Zhang@freescale.com>
generated by cgit v0.10.2 at 2024-10-03 16:58:17 (GMT)